UPSTREAM: xfrm: fix tunnel model fragmentation behavior

in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().

According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
	if packet is larger than 1280 bytes
		Send ICMPv6 "packet too big" with MTU=1280
                Drop packet
        else
		Encapsulate but do not set the Don't Fragment
                flag in the IPv4 header.  The resulting IPv4
                packet might be fragmented by the IPv4 layer
                on the encapsulator or by some router along
                the IPv4 path.
	endif
else
	if packet is larger than (IPv4 path MTU - 20)
        	Send ICMPv6 "packet too big" with
                MTU = (IPv4 path MTU - 20).
                Drop packet.
        else
                Encapsulate and set the Don't Fragment flag
                in the IPv4 header.
        endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.

After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.

48              2002::10        2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49   0x0000 (0) 2002::10        2002::11 1304         IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50   0x0000 (0) 2002::10        2002::11 200          ESP (SPI=0x00035000)
51              2002::10        2002::11 180          Echo (ping) request
52   0x56dc     2002::10        2002::11 248          IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)

xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1   0x6206 192.168.1.138   192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2   0x6206 2002::10        2002::11    88   IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3   0x0000 2002::10        2002::11    248  ICMPv6    Echo (ping) request

Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Bug: 226699354
Change-Id: Ideec82bea6a1efa26352680cb3113f7c36b945ef
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
2 files changed
tree: 7020d0537a69fa669929981c49179becede0b73d
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. ipc/
  12. kernel/
  13. lib/
  14. LICENSES/
  15. mm/
  16. net/
  17. samples/
  18. scripts/
  19. security/
  20. sound/
  21. tools/
  22. usr/
  23. virt/
  24. .clang-format
  25. .cocciconfig
  26. .get_maintainer.ignore
  27. .gitattributes
  28. .gitignore
  29. .mailmap
  30. build.config.aarch64
  31. build.config.allmodconfig
  32. build.config.allmodconfig.aarch64
  33. build.config.allmodconfig.arm
  34. build.config.allmodconfig.x86_64
  35. build.config.amlogic
  36. build.config.arm
  37. build.config.common
  38. build.config.db845c
  39. build.config.gki
  40. build.config.gki-debug.aarch64
  41. build.config.gki-debug.x86_64
  42. build.config.gki.aarch64
  43. build.config.gki.aarch64.fips140
  44. build.config.gki.aarch64.fips140_eval_testing
  45. build.config.gki.x86_64
  46. build.config.gki_kasan
  47. build.config.gki_kasan.aarch64
  48. build.config.gki_kasan.x86_64
  49. build.config.gki_kprobes
  50. build.config.gki_kprobes.aarch64
  51. build.config.gki_kprobes.x86_64
  52. build.config.hikey960
  53. build.config.khwasan
  54. build.config.rockchip
  55. build.config.x86_64
  56. COPYING
  57. CREDITS
  58. Kbuild
  59. Kconfig
  60. MAINTAINERS
  61. Makefile
  62. OWNERS
  63. README
  64. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)