Merge 5.10.147 into android12-5.10-lts

Changes in 5.10.147
	thunderbolt: Add support for Intel Maple Ridge
	thunderbolt: Add support for Intel Maple Ridge single port controller
	ALSA: hda/tegra: Use clk_bulk helpers
	ALSA: hda/tegra: Reset hardware
	ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically
	ALSA: hda: Fix Nvidia dp infoframe
	btrfs: fix hang during unmount when stopping a space reclaim worker
	uas: add no-uas quirk for Hiksemi usb_disk
	usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
	uas: ignore UAS for Thinkplus chips
	usb: typec: ucsi: Remove incorrect warning
	thunderbolt: Explicitly reset plug events delay back to USB4 spec value
	net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
	Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address
	clk: ingenic-tcu: Properly enable registers before accessing timers
	ARM: dts: integrator: Tag PCI host with device_type
	ntfs: fix BUG_ON in ntfs_lookup_inode_by_name()
	net: mt7531: only do PLL once after the reset
	libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
	mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
	mmc: hsq: Fix data stomping during mmc recovery
	mm/page_alloc: fix race condition between build_all_zonelists and page allocation
	mm: prevent page_frag_alloc() from corrupting the memory
	mm/migrate_device.c: flush TLB while holding PTL
	mm: fix madivse_pageout mishandling on non-LRU page
	media: dvb_vb2: fix possible out of bound access
	media: rkvdec: Disable H.264 error detection
	swiotlb: max mapping size takes min align mask into account
	scsi: hisi_sas: Revert "scsi: hisi_sas: Limit max hw sectors for v3 HW"
	ARM: dts: am33xx: Fix MMCHS0 dma properties
	reset: imx7: Fix the iMX8MP PCIe PHY PERST support
	soc: sunxi: sram: Actually claim SRAM regions
	soc: sunxi: sram: Prevent the driver from being unbound
	soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()
	soc: sunxi: sram: Fix probe function ordering issues
	soc: sunxi: sram: Fix debugfs info for A64 SRAM C
	ASoC: tas2770: Reinit regcache on reset
	Revert "drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time"
	Input: melfas_mip4 - fix return value check in mip4_probe()
	usbnet: Fix memory leak in usbnet_disconnect()
	net: sched: act_ct: fix possible refcount leak in tcf_ct_init()
	cxgb4: fix missing unlock on ETHOFLD desc collect fail path
	nvme: add new line after variable declatation
	nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
	net: stmmac: power up/down serdes in stmmac_open/release
	selftests: Fix the if conditions of in test_extra_filter()
	clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
	clk: iproc: Do not rely on node name for correct PLL setup
	KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest
	x86/alternative: Fix race in try_get_desc()
	ALSA: hda/hdmi: fix warning about PCM count when used with SOF
	Linux 5.10.147

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ie6bbda212478a9c78498458b61e39200e6637f31
tree: 8ab793c633952df00204e6da364eb4bc15e3f944
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. ipc/
  12. kernel/
  13. lib/
  14. LICENSES/
  15. mm/
  16. net/
  17. samples/
  18. scripts/
  19. security/
  20. sound/
  21. tools/
  22. usr/
  23. virt/
  24. .clang-format
  25. .cocciconfig
  26. .get_maintainer.ignore
  27. .gitattributes
  28. .gitignore
  29. .mailmap
  30. build.config.aarch64
  31. build.config.allmodconfig
  32. build.config.allmodconfig.aarch64
  33. build.config.allmodconfig.arm
  34. build.config.allmodconfig.x86_64
  35. build.config.amlogic
  36. build.config.arm
  37. build.config.common
  38. build.config.db845c
  39. build.config.gki
  40. build.config.gki-debug.aarch64
  41. build.config.gki-debug.x86_64
  42. build.config.gki.aarch64
  43. build.config.gki.aarch64.fips140
  44. build.config.gki.aarch64.fips140_eval_testing
  45. build.config.gki.x86_64
  46. build.config.gki_kasan
  47. build.config.gki_kasan.aarch64
  48. build.config.gki_kasan.x86_64
  49. build.config.gki_kprobes
  50. build.config.gki_kprobes.aarch64
  51. build.config.gki_kprobes.x86_64
  52. build.config.hikey960
  53. build.config.khwasan
  54. build.config.rockchip
  55. build.config.x86_64
  56. COPYING
  57. CREDITS
  58. Kbuild
  59. Kconfig
  60. MAINTAINERS
  61. Makefile
  62. OWNERS
  63. README
  64. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)