Merge f8912147dba3 ("Merge tag 'soc-defconfig-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") into android-mainline
Steps on the way to v6.18-rc1
Change-Id: Id2a6f8ce7049550f5d9ee6fdb3f0100d856a8f1c
Signed-off-by: Carlos Llamas <cmllamas@google.com>
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint
index fea5231..5327995 100644
--- a/Documentation/devicetree/bindings/.yamllint
+++ b/Documentation/devicetree/bindings/.yamllint
@@ -4,7 +4,7 @@
quoted-strings:
required: only-when-needed
extra-allowed:
- - '[$^,[]'
+ - '[$^[]'
- '^/$'
line-length:
# 80 chars should be enough, but don't fail if a line is longer
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
deleted file mode 100644
index f5ad0ff..0000000
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
-The EDAC accesses a range of registers in the SDRAM controller.
-
-Required properties:
-- compatible : should contain "altr,sdram-edac" or "altr,sdram-edac-a10"
-- altr,sdr-syscon : phandle of the sdr module
-- interrupts : Should contain the SDRAM ECC IRQ in the
- appropriate format for the IRQ controller.
-
-Example:
- sdramedac {
- compatible = "altr,sdram-edac";
- altr,sdr-syscon = <&sdr>;
- interrupts = <0 39 4>;
- };
diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml
index da60e9d..5c2629e 100644
--- a/Documentation/devicetree/bindings/arm/apple.yaml
+++ b/Documentation/devicetree/bindings/arm/apple.yaml
@@ -92,10 +92,11 @@
Devices based on the "M2" SoC:
- MacBook Air (M2, 2022)
+ - MacBook Air (15-inch, M2, 2023)
- MacBook Pro (13-inch, M2, 2022)
- Mac mini (M2, 2023)
- And devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs:
+ Devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs:
- MacBook Pro (14-inch, M1 Pro, 2021)
- MacBook Pro (14-inch, M1 Max, 2021)
@@ -104,6 +105,17 @@
- Mac Studio (M1 Max, 2022)
- Mac Studio (M1 Ultra, 2022)
+ Devices based on the "M2 Pro", "M2 Max" and "M2 Ultra" SoCs:
+
+ - MacBook Pro (14-inch, M2 Pro, 2023)
+ - MacBook Pro (14-inch, M2 Max, 2023)
+ - MacBook Pro (16-inch, M2 Pro, 2023)
+ - MacBook Pro (16-inch, M2 Max, 2023)
+ - Mac mini (M2 Pro, 2023)
+ - Mac Studio (M2 Max, 2023)
+ - Mac Studio (M2 Ultra, 2023)
+ - Mac Pro (M2 Ultra, 2023)
+
The compatible property should follow this format:
compatible = "apple,<targettype>", "apple,<socid>", "apple,arm-platform";
@@ -279,6 +291,7 @@
items:
- enum:
- apple,j413 # MacBook Air (M2, 2022)
+ - apple,j415 # MacBook Air (15-inch, M2, 2023)
- apple,j473 # Mac mini (M2, 2023)
- apple,j493 # MacBook Pro (13-inch, M2, 2022)
- const: apple,t8112
@@ -308,6 +321,32 @@
- const: apple,t6002
- const: apple,arm-platform
+ - description: Apple M2 Pro SoC based platforms
+ items:
+ - enum:
+ - apple,j414s # MacBook Pro (14-inch, M2 Pro, 2023)
+ - apple,j416s # MacBook Pro (16-inch, M2 Pro, 2023)
+ - apple,j474s # Mac mini (M2 Pro, 2023)
+ - const: apple,t6020
+ - const: apple,arm-platform
+
+ - description: Apple M2 Max SoC based platforms
+ items:
+ - enum:
+ - apple,j414c # MacBook Pro (14-inch, M2 Max, 2023)
+ - apple,j416c # MacBook Pro (16-inch, M2 Max, 2023)
+ - apple,j475c # Mac Studio (M2 Max, 2023)
+ - const: apple,t6021
+ - const: apple,arm-platform
+
+ - description: Apple M2 Ultra SoC based platforms
+ items:
+ - enum:
+ - apple,j180d # Mac Pro (M2 Ultra, 2023)
+ - apple,j475d # Mac Studio (M2 Ultra, 2023)
+ - const: apple,t6022
+ - const: apple,arm-platform
+
additionalProperties: true
...
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index 8dd6b64..4cdca53 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -103,8 +103,9 @@
- const: arm,juno-r2
- const: arm,juno
- const: arm,vexpress
- - description: Arm AEMv8a Versatile Express Real-Time System Model
- (VE RTSM) is a programmers view of the Versatile Express with Arm
+ - description: Arm AEMv8a (Architecture Envelope Model)
+ Versatile Express Real-Time System Model (VE RTSM)
+ is a programmers view of the Versatile Express with Arm
v8A hardware. See ARM DUI 0575D.
items:
- const: arm,rtsm_ve,aemv8a
@@ -139,7 +140,7 @@
the connection between the motherboard and any tiles. Sometimes the
compatible is placed directly under this node, sometimes it is placed
in a subnode named "motherboard-bus". Sometimes the compatible includes
- "arm,vexpress,v2?-p1" sometimes (on software models) is is just
+ "arm,vexpress,v2?-p1" sometimes (on software models) it is just
"simple-bus". If the compatible is placed in the "motherboard-bus" node,
it is stricter and always has two compatibles.
type: object
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 456dbf7..aedefca 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -46,6 +46,7 @@
- facebook,yamp-bmc
- facebook,yosemitev2-bmc
- facebook,wedge400-bmc
+ - facebook,wedge400-data64-bmc
- hxt,stardragon4800-rep2-bmc
- ibm,mihawk-bmc
- ibm,mowgli-bmc
@@ -81,9 +82,12 @@
- asus,x4tf-bmc
- facebook,bletchley-bmc
- facebook,catalina-bmc
+ - facebook,clemente-bmc
- facebook,cloudripper-bmc
+ - facebook,darwin-bmc
- facebook,elbert-bmc
- facebook,fuji-bmc
+ - facebook,fuji-data64-bmc
- facebook,greatlakes-bmc
- facebook,harma-bmc
- facebook,minerva-cmc
diff --git a/Documentation/devicetree/bindings/arm/axis.txt b/Documentation/devicetree/bindings/arm/axis.txt
deleted file mode 100644
index ebd33a8..0000000
--- a/Documentation/devicetree/bindings/arm/axis.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Axis Communications AB
-ARTPEC series SoC Device Tree Bindings
-
-ARTPEC-6 ARM SoC
-================
-
-Required root node properties:
-- compatible = "axis,artpec6";
-
-ARTPEC-6 Development board:
----------------------------
-Required root node properties:
-- compatible = "axis,artpec6-dev-board", "axis,artpec6";
diff --git a/Documentation/devicetree/bindings/arm/axis.yaml b/Documentation/devicetree/bindings/arm/axis.yaml
new file mode 100644
index 0000000..63e9aca
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axis.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/axis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC platforms
+
+maintainers:
+ - Jesper Nilsson <jesper.nilsson@axis.com>
+ - Lars Persson <lars.persson@axis.com>
+ - linux-arm-kernel@axis.com
+
+description: |
+ ARM platforms using SoCs designed by Axis branded as "ARTPEC".
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Axis ARTPEC-6 SoC board
+ items:
+ - enum:
+ - axis,artpec6-dev-board
+ - const: axis,artpec6
+
+ - description: Axis ARTPEC-8 SoC board
+ items:
+ - enum:
+ - axis,artpec8-grizzly
+ - const: axis,artpec8
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index d925e7a..f47d74a 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -25,6 +25,7 @@
- enum:
- asus,rt-ac56u
- asus,rt-ac68u
+ - buffalo,wxr-1750dhp
- buffalo,wzr-1166dhp
- buffalo,wzr-1166dhp2
- buffalo,wzr-1750dhp
diff --git a/Documentation/devicetree/bindings/arm/cavium,thunder-88xx.yaml b/Documentation/devicetree/bindings/arm/cavium,thunder-88xx.yaml
new file mode 100644
index 0000000..d7c8131
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cavium,thunder-88xx.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cavium,thunder-88xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cavium Thunder 88xx SoC
+
+maintainers:
+ - Robert Richter <rric@kernel.org>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ items:
+ - const: cavium,thunder-88xx
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder.txt b/Documentation/devicetree/bindings/arm/cavium-thunder.txt
deleted file mode 100644
index 6f63a58..0000000
--- a/Documentation/devicetree/bindings/arm/cavium-thunder.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Cavium Thunder platform device tree bindings
---------------------------------------------
-
-Boards with Cavium's Thunder SoC shall have following properties.
-
-Root Node
----------
-Required root node properties:
-
- - compatible = "cavium,thunder-88xx";
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder2.txt b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
deleted file mode 100644
index dc5dd65..0000000
--- a/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Cavium ThunderX2 CN99XX platform tree bindings
-----------------------------------------------
-
-Boards with Cavium ThunderX2 CN99XX SoC shall have the root property:
- compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
-
-These SoC uses the "cavium,thunder2" core which will be compatible
-with "brcm,vulcan".
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 4accf4c..736b7ab 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -80,6 +80,8 @@
compatible:
enum:
+ - apm,potenza
+ - apm,strega
- apple,avalanche
- apple,blizzard
- apple,cyclone
@@ -121,6 +123,10 @@
- arm,arm1176jzf-s
- arm,arm11mpcore
- arm,armv8 # Only for s/w models
+ - arm,c1-nano
+ - arm,c1-premium
+ - arm,c1-pro
+ - arm,c1-ultra
- arm,cortex-a5
- arm,cortex-a7
- arm,cortex-a8
@@ -143,11 +149,14 @@
- arm,cortex-a78
- arm,cortex-a78ae
- arm,cortex-a78c
+ - arm,cortex-a320
- arm,cortex-a510
- arm,cortex-a520
+ - arm,cortex-a520ae
- arm,cortex-a710
- arm,cortex-a715
- arm,cortex-a720
+ - arm,cortex-a720ae
- arm,cortex-a725
- arm,cortex-m0
- arm,cortex-m0+
@@ -345,10 +354,27 @@
deprecated: true
description: Use 'cpu-supply' instead
+ pu-supply:
+ deprecated: true
+ description: Only for i.MX6Q/DL/SL SoCs.
+
+ soc-supply:
+ deprecated: true
+ description: Only for i.MX6/7 Soc.
+
sram-supply:
deprecated: true
description: Use 'mem-supply' instead
+ fsl,soc-operating-points:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: FSL i.MX6 Soc operation-points when change cpu frequency
+ deprecated: true
+ items:
+ items:
+ - description: Frequency in kHz
+ - description: Voltage for OPP in uV
+
mediatek,cci:
$ref: /schemas/types.yaml#/definitions/phandle
description: Link to Mediatek Cache Coherent Interconnect
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
index 3b26040..9d377e1 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
@@ -28,6 +28,14 @@
reg:
maxItems: 1
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: divcore
+ - const: hsrun_divcore
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index a3e9f9e..00cdf49 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1112,6 +1112,7 @@
- skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
- skov,imx8mp-skov-revc-bd500 # SKOV i.MX8MP climate control with LED frontplate
- skov,imx8mp-skov-revc-tian-g07017 # SKOV i.MX8MP climate control with 7" panel
+ - ultratronik,imx8mp-ultra-mach-sbc # Ultratronik SBC i.MX8MP based board
- ysoft,imx8mp-iota2-lumpy # Y Soft i.MX8MP IOTA2 Lumpy Board
- const: fsl,imx8mp
@@ -1200,6 +1201,24 @@
- const: polyhex,imx8mp-debix-som-a # Polyhex Debix SOM A
- const: fsl,imx8mp
+ - description: SolidRun i.MX8MP SoM based boards
+ items:
+ - enum:
+ - solidrun,imx8mp-cubox-m # SolidRun i.MX8MP SoM on CuBox-M
+ - solidrun,imx8mp-hummingboard-mate # SolidRun i.MX8MP SoM on HummingBoard Mate
+ - solidrun,imx8mp-hummingboard-pro # SolidRun i.MX8MP SoM on HummingBoard Pro
+ - solidrun,imx8mp-hummingboard-pulse # SolidRun i.MX8MP SoM on HummingBoard Pulse
+ - solidrun,imx8mp-hummingboard-ripple # SolidRun i.MX8MP SoM on HummingBoard Ripple
+ - const: solidrun,imx8mp-sr-som
+ - const: fsl,imx8mp
+
+ - description: TechNexion EDM-G-IMX8M-PLUS SoM based boards
+ items:
+ - enum:
+ - technexion,edm-g-imx8mp-wb # TechNexion EDM-G-IMX8MP SOM on WB-EDM-G
+ - const: technexion,edm-g-imx8mp # TechNexion EDM-G-IMX8MP SOM
+ - const: fsl,imx8mp
+
- description: Toradex Boards with SMARC iMX8M Plus Modules
items:
- const: toradex,smarc-imx8mp-dev # Toradex SMARC iMX8M Plus on Toradex SMARC Development Board
@@ -1382,9 +1401,16 @@
- description: i.MX8ULP based Boards
items:
- enum:
+ - fsl,imx8ulp-9x9-evk # i.MX8ULP EVK9 Board
- fsl,imx8ulp-evk # i.MX8ULP EVK Board
- const: fsl,imx8ulp
+ - description: i.MX91 based Boards
+ items:
+ - enum:
+ - fsl,imx91-11x11-evk # i.MX91 11x11 EVK Board
+ - const: fsl,imx91
+
- description: i.MX93 based Boards
items:
- enum:
@@ -1426,6 +1452,24 @@
- const: fsl,imxrt1170
- description:
+ TQMa91xxLA and TQMa91xxCA are two series of feature compatible SOM
+ using NXP i.MX91 SOC in 11x11 mm package.
+ TQMa91xxLA is designed to be soldered on different carrier boards.
+ TQMa91xxCA is a compatible variant using board to board connectors.
+ All SOM and CPU variants use the same device tree hence only one
+ compatible is needed. Bootloader disables all features not present
+ in the assembled SOC.
+ MBa91xxCA mainboard can be used as starterkit for the SOM
+ soldered on an adapter board or for the connector variant
+ MBa91xxLA mainboard is a single board computer using the solderable
+ SOM variant
+ items:
+ - enum:
+ - tq,imx91-tqma9131-mba91xxca # TQ-Systems GmbH i.MX91 TQMa91xxCA/LA SOM on MBa91xxCA
+ - const: tq,imx91-tqma9131 # TQ-Systems GmbH i.MX91 TQMa91xxCA/LA SOM
+ - const: fsl,imx91
+
+ - description:
TQMa93xxLA and TQMa93xxCA are two series of feature compatible SOM
using NXP i.MX93 SOC in 11x11 mm package.
TQMa93xxLA is designed to be soldered on different carrier boards.
@@ -1537,6 +1581,12 @@
- fsl,ls1012a-qds
- const: fsl,ls1012a
+ - description: TQ Systems TQMLS12AL SoM on MBLS1012AL board
+ items:
+ - const: tq,ls1012a-tqmls1012al-mbls1012al
+ - const: tq,ls1012a-tqmls1012al
+ - const: fsl,ls1012a
+
- description: LS1021A based Boards
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
index d60792b..b7b4308 100644
--- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -16,6 +16,8 @@
oneOf:
- items:
- enum:
+ - actiontec,mi424wr-ac
+ - actiontec,mi424wr-d
- adieng,coyote
- arcom,vulcan
- dlink,dsm-g600-a
diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
deleted file mode 100644
index f310bad..0000000
--- a/Documentation/devicetree/bindings/arm/keystone/keystone.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-TI Keystone Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with Keystone2 based devices (TCI66xxK2H) SOC shall have the
-following properties.
-
-Required properties:
- - compatible: All TI specific devices present in Keystone SOC should be in
- the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
- type UART should use the specified compatible for those devices.
-
-SoC families:
-
-- Keystone 2 generic SoC:
- compatible = "ti,keystone"
-
-SoCs:
-
-- Keystone 2 Hawking/Kepler
- compatible = "ti,k2hk", "ti,keystone"
-- Keystone 2 Lamarr
- compatible = "ti,k2l", "ti,keystone"
-- Keystone 2 Edison
- compatible = "ti,k2e", "ti,keystone"
-- K2G
- compatible = "ti,k2g", "ti,keystone"
-
-Boards:
-- Keystone 2 Hawking/Kepler EVM
- compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"
-
-- Keystone 2 Lamarr EVM
- compatible = "ti,k2l-evm", "ti, k2l", "ti,keystone"
-
-- Keystone 2 Edison EVM
- compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"
-
-- K2G EVM
- compatible = "ti,k2g-evm", "ti,k2g", "ti-keystone"
-
-- K2G Industrial Communication Engine EVM
- compatible = "ti,k2g-ice", "ti,k2g", "ti-keystone"
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.yaml b/Documentation/devicetree/bindings/arm/marvell,berlin.yaml
new file mode 100644
index 0000000..4e84429
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell,berlin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics/Marvell Berlin SoC
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+
+description:
+ According to https://www.synaptics.com/company/news/conexant-marvell
+ Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+ Berlin SoCs are now Synaptics' SoCs.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - sony,nsz-gs7
+ - const: marvell,berlin2
+ - const: marvell,berlin
+ - items:
+ - enum:
+ - google,chromecast
+ - valve,steamlink
+ - const: marvell,berlin2cd
+ - const: marvell,berlin
+ - items:
+ - enum:
+ - marvell,berlin2q-dmp
+ - const: marvell,berlin2q
+ - const: marvell,berlin
+ - items:
+ - enum:
+ - marvell,berlin4ct-dmp
+ - marvell,berlin4ct-stb
+ - const: marvell,berlin4ct
+ - const: marvell,berlin
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
deleted file mode 100644
index 64e8c73..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
-----------------------------------------------------------------------
-
-Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp-98dx3236"
-
-In addition, boards using the Marvell 98DX3336 SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp-98dx3336"
-
-In addition, boards using the Marvell 98DX4251 SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp-98dx4251"
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
index c832450..72de11b 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -115,45 +115,6 @@
SYSTEM CONTROLLER 1
===================
-Thermal:
---------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal*.yaml
-
-The thermal IP can probe the temperature all around the processor. It
-may feature several channels, each of them wired to one sensor.
-
-It is possible to setup an overheat interrupt by giving at least one
-critical point to any subnode of the thermal-zone node.
-
-Required properties:
-- compatible: must be one of:
- * marvell,armada-ap806-thermal
-- reg: register range associated with the thermal functions.
-
-Optional properties:
-- interrupts: overheat interrupt handle. Should point to line 18 of the
- SEI irqchip. See interrupt-controller/interrupts.txt
-- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
- to this IP and represents the channel ID. There is one sensor per
- channel. O refers to the thermal IP internal channel, while positive
- IDs refer to each CPU.
-
-Example:
-ap_syscon1: system-controller@6f8000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f8000 0x1000>;
-
- ap_thermal: thermal-sensor@80 {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x80 0x10>;
- interrupt-parent = <&sei>;
- interrupts = <18>;
- #thermal-sensor-cells = <1>;
- };
-};
-
Cluster clocks:
---------------
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt b/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt
deleted file mode 100644
index c6ed90e..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Marvell Armada 370 and Armada XP Platforms Device Tree Bindings
----------------------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 370 and Armada XP families
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada-370-xp"
-
-In addition, boards using the Marvell Armada 370 SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada370"
-
-In addition, boards using the Marvell Armada XP SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp"
-
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-375.txt b/Documentation/devicetree/bindings/arm/marvell/armada-375.txt
deleted file mode 100644
index 867d0b8..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-375.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Marvell Armada 375 Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 375 family shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada375"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
index 51e1386..b2f4fe8 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
@@ -23,6 +23,7 @@
- marvell,armada-3720-db
- methode,edpu
- methode,udpu
+ - ripe,atlas-v5
- const: marvell,armada3720
- const: marvell,armada3710
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
deleted file mode 100644
index 8946866..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Marvell Armada 39x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 39x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada390"
-
-In addition, boards using the Marvell Armada 395 SoC shall have the
-following property before the common "marvell,armada390" one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada395"
-
-Example:
-
-compatible = "marvell,a395-gp", "marvell,armada395", "marvell,armada390";
-
-Boards using the Marvell Armada 398 SoC shall have the following
-property before the common "marvell,armada390" one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada398"
-
-Example:
-
-compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
index 9d5d70c..54ff9f2 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
@@ -189,46 +189,3 @@
};
};
-
-SYSTEM CONTROLLER 1
-===================
-
-Thermal:
---------
-
-The thermal IP can probe the temperature all around the processor. It
-may feature several channels, each of them wired to one sensor.
-
-It is possible to setup an overheat interrupt by giving at least one
-critical point to any subnode of the thermal-zone node.
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal*.yaml
-
-Required properties:
-- compatible: must be one of:
- * marvell,armada-cp110-thermal
-- reg: register range associated with the thermal functions.
-
-Optional properties:
-- interrupts-extended: overheat interrupt handle. Should point to
- a line of the ICU-SEI irqchip (116 is what is usually used by the
- firmware). The ICU-SEI will redirect towards interrupt line #37 of the
- AP SEI which is shared across all CPs.
- See interrupt-controller/interrupts.txt
-- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
- to this IP and represents the channel ID. There is one sensor per
- channel. O refers to the thermal IP internal channel.
-
-Example:
-CP110_LABEL(syscon1): system-controller@6f8000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f8000 0x1000>;
-
- CP110_LABEL(thermal): thermal-sensor@70 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x70 0x10>;
- interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
- #thermal-sensor-cells = <1>;
- };
-};
diff --git a/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt
deleted file mode 100644
index 98cce9a..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell Kirkwood Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with a SoC of the Marvell Kirkwood
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,kirkwood";
-
-In order to support the kirkwood cpufreq driver, there must be a node
-cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave",
-where the "powersave" clock is a gating clock used to switch the CPU
-between the "cpu_clk" and the "ddrclk".
-
-Example:
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "marvell,sheeva-88SV131";
- clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
- clock-names = "cpu_clk", "ddrclk", "powersave";
- };
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,armada-370-xp.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,armada-370-xp.yaml
new file mode 100644
index 0000000..e65eadf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,armada-370-xp.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,armada-370-xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370 and Armada XP platforms
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ctera,c200-v2
+ - dlink,dns327l
+ - globalscale,mirabox
+ - netgear,readynas-102
+ - netgear,readynas-104
+ - marvell,a370-db
+ - marvell,a370-rd
+ - seagate,dart-2
+ - seagate,dart-4
+ - seagate,cumulus-max
+ - seagate,cumulus
+ - synology,ds213j
+ - const: marvell,armada370
+ - const: marvell,armada-370-xp
+
+ - items:
+ - enum:
+ - mikrotik,crs305-1g-4s
+ - mikrotik,crs326-24g-2s
+ - mikrotik,crs328-4c-20s-4s
+ - const: marvell,armadaxp-98dx3236
+ - const: marvell,armada-370-xp
+
+ - items:
+ - const: marvell,db-xc3-24g4xg
+ - const: marvell,armadaxp-98dx3336
+ - const: marvell,armada-370-xp
+
+ - items:
+ - const: marvell,db-dxbc2
+ - const: marvell,armadaxp-98dx4251
+ - const: marvell,armada-370-xp
+
+ - items:
+ - enum:
+ - lenovo,ix4-300d
+ - linksys,mamba
+ - marvell,rd-axpwifiap
+ - netgear,readynas-2120
+ - synology,ds414
+ - const: marvell,armadaxp-mv78230
+ - const: marvell,armadaxp
+ - const: marvell,armada-370-xp
+
+ - items:
+ - const: plathome,openblocks-ax3-4
+ - const: marvell,armadaxp-mv78260
+ - const: marvell,armadaxp
+ - const: marvell,armada-370-xp
+
+ - items:
+ - enum:
+ - marvell,axp-db
+ - marvell,axp-gp
+ - marvell,axp-matrix
+ - const: marvell,armadaxp-mv78460
+ - const: marvell,armadaxp
+ - const: marvell,armada-370-xp
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,armada375.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,armada375.yaml
new file mode 100644
index 0000000..81c33e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,armada375.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,armada375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 375 Platform
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ items:
+ - const: marvell,a375-db
+ - const: marvell,armada375
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,armada390.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,armada390.yaml
new file mode 100644
index 0000000..5ff6a54
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,armada390.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,armada390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 39x Platforms
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - const: marvell,a390-db
+ - const: marvell,armada390
+ - items:
+ - enum:
+ - marvell,a398-db
+ - const: marvell,armada398
+ - const: marvell,armada390
+ - items:
+ - enum:
+ - marvell,a395-gp
+ - const: marvell,armada395
+ - const: marvell,armada390
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
deleted file mode 100644
index e10e852..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Marvell Dove Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with a Marvell Dove SoC shall have the following properties:
-
-Required root node property:
-- compatible: must contain "marvell,dove";
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.yaml
new file mode 100644
index 0000000..a37804f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,dove.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Dove SoC
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - compulab,cm-a510
+ - solidrun,cubox
+ - globalscale,d2plug
+ - globalscale,d3plug
+ - marvell,dove-db
+ - const: marvell,dove
+ - items:
+ - const: solidrun,cubox-es
+ - const: solidrun,cubox
+ - const: marvell,dove
+ - items:
+ - const: compulab,sbc-a510
+ - const: compulab,cm-a510
+ - const: marvell,dove
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt
deleted file mode 100644
index 7d28fe4..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-Marvell Kirkwood SoC Family Device Tree Bindings
-------------------------------------------------
-
-Boards with a SoC of the Marvell Kirkwook family, eg 88f6281
-
-* Required root node properties:
-compatible: must contain "marvell,kirkwood"
-
-In addition, the above compatible shall be extended with the specific
-SoC. Currently known SoC compatibles are:
-
-"marvell,kirkwood-88f6192"
-"marvell,kirkwood-88f6281"
-"marvell,kirkwood-88f6282"
-"marvell,kirkwood-88f6283"
-"marvell,kirkwood-88f6702"
-"marvell,kirkwood-98DX4122"
-
-And in addition, the compatible shall be extended with the specific
-board. Currently known boards are:
-
-"buffalo,linkstation-lsqvl"
-"buffalo,linkstation-lsvl"
-"buffalo,linkstation-lswsxl"
-"buffalo,linkstation-lswxl"
-"buffalo,linkstation-lswvl"
-"buffalo,lschlv2"
-"buffalo,lsxhl"
-"buffalo,lsxl"
-"cloudengines,pogo02"
-"cloudengines,pogoplugv4"
-"dlink,dns-320"
-"dlink,dns-320-a1"
-"dlink,dns-325"
-"dlink,dns-325-a1"
-"dlink,dns-kirkwood"
-"excito,b3"
-"globalscale,dreamplug-003-ds2001"
-"globalscale,guruplug"
-"globalscale,guruplug-server-plus"
-"globalscale,sheevaplug"
-"globalscale,sheevaplug"
-"globalscale,sheevaplug-esata"
-"globalscale,sheevaplug-esata-rev13"
-"iom,iconnect"
-"iom,iconnect-1.1"
-"iom,ix2-200"
-"keymile,km_kirkwood"
-"lacie,cloudbox"
-"lacie,inetspace_v2"
-"lacie,laplug"
-"lacie,nas2big"
-"lacie,netspace_lite_v2"
-"lacie,netspace_max_v2"
-"lacie,netspace_mini_v2"
-"lacie,netspace_v2"
-"marvell,db-88f6281-bp"
-"marvell,db-88f6282-bp"
-"marvell,mv88f6281gtw-ge"
-"marvell,rd88f6281"
-"marvell,rd88f6281"
-"marvell,rd88f6281-a0"
-"marvell,rd88f6281-a1"
-"mpl,cec4"
-"mpl,cec4-10"
-"netgear,readynas"
-"netgear,readynas"
-"netgear,readynas-duo-v2"
-"netgear,readynas-nv+-v2"
-"plathome,openblocks-a6"
-"plathome,openblocks-a7"
-"raidsonic,ib-nas6210"
-"raidsonic,ib-nas6210-b"
-"raidsonic,ib-nas6220"
-"raidsonic,ib-nas6220-b"
-"raidsonic,ib-nas62x0"
-"seagate,dockstar"
-"seagate,goflexnet"
-"synology,ds109"
-"synology,ds110jv10"
-"synology,ds110jv20"
-"synology,ds110jv30"
-"synology,ds111"
-"synology,ds209"
-"synology,ds210jv10"
-"synology,ds210jv20"
-"synology,ds212"
-"synology,ds212jv10"
-"synology,ds212jv20"
-"synology,ds212pv10"
-"synology,ds409"
-"synology,ds409slim"
-"synology,ds410j"
-"synology,ds411"
-"synology,ds411j"
-"synology,ds411slim"
-"synology,ds413jv10"
-"synology,rs212"
-"synology,rs409"
-"synology,rs411"
-"synology,rs812"
-"usi,topkick"
-"usi,topkick-1281P2"
-"zyxel,nsa310"
-"zyxel,nsa310a"
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml
new file mode 100644
index 0000000..1207840
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,kirkwood.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Kirkwood SoC Family
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qnap,ts219
+ - qnap,ts419
+ - synology,ds110
+ - synology,ds111
+ - synology,ds209
+ - synology,ds409slim
+ - synology,ds411j
+ - synology,ds411slim
+ - synology,rs212
+ - synology,rs409
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,ds109
+ - const: synology,ds110jv20
+ - const: synology,ds110
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,ds110jv10
+ - const: synology,ds110jv30
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,ds210jv10
+ - const: synology,ds210jv20
+ - const: synology,ds210jv30
+ - const: synology,ds211j
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,ds212jv10
+ - const: synology,ds212jv20
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,ds212
+ - const: synology,ds212pv10
+ - const: synology,ds212pv10
+ - const: synology,ds212pv20
+ - const: synology,ds213airv10
+ - const: synology,ds213v10
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,ds409
+ - const: synology,ds410j
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,ds411
+ - const: synology,ds413jv10
+ - const: marvell,kirkwood
+
+ - items:
+ - const: synology,rs411
+ - const: synology,rs812
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - cloudengines,pogoplugv4
+ - lacie,laplug
+ - lacie,netspace_lite_v2
+ - lacie,netspace_mini_v2
+ - marvell,rd88f6192
+ - seagate,blackarmor-nas220
+ - enum:
+ - marvell,kirkwood-88f6192
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - buffalo,lswsxl
+ - buffalo,lswxl
+ - checkpoint,l-50
+ - cloudengines,pogoe02
+ - ctera,c200-v1
+ - dlink,dir-665
+ - endian,4i-edge-200
+ - excito,b3
+ - globalscale,sheevaplug
+ - hp,t5325
+ - iom,ix2-200
+ - lacie,inetspace_v2
+ - lacie,netspace_v2
+ - lacie,netspace_max_v2
+ - marvell,db-88f6281-bp
+ - marvell,mv88f6281gtw-ge
+ - seagate,dockstar
+ - seagate,goflexnet
+ - zyxel,nsa310
+ - zyxel,nsa320
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - buffalo,lschlv2
+ - buffalo,lsxhl
+ - const: buffalo,lsxl
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: dlink,dns-320-a1
+ - const: dlink,dns-320
+ - const: dlink,dns-kirkwood
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: dlink,dns-325-a1
+ - const: dlink,dns-325
+ - const: dlink,dns-kirkwood
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: globalscale,dreamplug-003-ds2001
+ - const: globalscale,dreamplug
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: globalscale,guruplug-server-plus
+ - const: globalscale,guruplug
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: globalscale,sheevaplug-esata-rev13
+ - const: globalscale,sheevaplug-esata
+ - const: globalscale,sheevaplug
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: iom,iconnect-1.1
+ - const: iom,iconnect
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: lacie,d2net_v2
+ - const: lacie,netxbig
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+ - items:
+ - enum:
+ - lacie,net2big_v2
+ - lacie,net5big_v2
+ - const: lacie,netxbig
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - marvell,openrd-base
+ - marvell,openrd-client
+ - marvell,openrd-ultimate
+ - const: marvell,openrd
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - marvell,rd88f6281-a
+ - marvell,rd88f6281-z0
+ - const: marvell,rd88f6281
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: mpl,cec4-10
+ - const: mpl,cec4
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: raidsonic,ib-nas6210-b
+ - const: raidsonic,ib-nas6220-b
+ - const: raidsonic,ib-nas6210
+ - const: raidsonic,ib-nas6220
+ - const: raidsonic,ib-nas62x0
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - const: zyxel,nsa310a
+ - const: zyxel,nsa310
+ - const: marvell,kirkwood-88f6281
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - buffalo,lsqvl
+ - buffalo,lsvl
+ - buffalo,lswvl
+ - linksys,viper
+ - marvell,db-88f6282-bp
+ - zyxel,nsa325
+ - const: marvell,kirkwood-88f6282
+ - const: marvell,kirkwood
+
+ - items:
+ - const: lacie,nas2big
+ - const: lacie,netxbig
+ - const: marvell,kirkwood-88f6282
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - netgear,readynas-duo-v2
+ - netgear,readynas-nv+-v2
+ - const: netgear,readynas
+ - const: marvell,kirkwood-88f6282
+ - const: marvell,kirkwood
+
+ - items:
+ - const: usi,topkick-1281P2
+ - const: usi,topkick
+ - const: marvell,kirkwood-88f6282
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - plathome,openblocks-a6
+ - plathome,openblocks-a7
+ - const: marvell,kirkwood-88f6283
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - lacie,cloudbox
+ - zyxel,nsa310s
+ - const: marvell,kirkwood-88f6702
+ - const: marvell,kirkwood
+
+ - items:
+ - enum:
+ - keymile,km_fixedeth
+ - keymile,km_kirkwood
+ - const: marvell,kirkwood-98DX4122
+ - const: marvell,kirkwood
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
deleted file mode 100644
index 748a8f2..0000000
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Marvell Orion SoC Family Device Tree Bindings
----------------------------------------------
-
-Boards with a SoC of the Marvell Orion family, eg 88f5181
-
-* Required root node properties:
-compatible: must contain "marvell,orion5x"
-
-In addition, the above compatible shall be extended with the specific
-SoC. Currently known SoC compatibles are:
-
-"marvell,orion5x-88f5181"
-"marvell,orion5x-88f5182"
-
-And in addition, the compatible shall be extended with the specific
-board. Currently known boards are:
-
-"buffalo,lsgl"
-"buffalo,lswsgl"
-"buffalo,lswtgl"
-"lacie,ethernet-disk-mini-v2"
-"lacie,d2-network"
-"marvell,rd-88f5182-nas"
-"maxtor,shared-storage-2"
-"netgear,wnr854t"
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml
new file mode 100644
index 0000000..c041759
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,orion5x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion5x SoC Family
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - netgear,wnr854t
+ - const: marvell,orion5x-88f5181
+ - const: marvell,orion5x
+ - items:
+ - enum:
+ - buffalo,kurobox-pro
+ - buffalo,lschl
+ - buffalo,lsgl
+ - buffalo,lswsgl
+ - buffalo,lswtgl
+ - lacie,ethernet-disk-mini-v2
+ - lacie,d2-network
+ - marvell,rd-88f5182-nas
+ - maxtor,shared-storage-2
+ - const: marvell,orion5x-88f5182
+ - const: marvell,orion5x
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 19ed944..f0427787 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -431,11 +431,13 @@
- const: mediatek,mt8365
- items:
- enum:
+ - grinn,genio-510-sbc
- mediatek,mt8370-evk
- const: mediatek,mt8370
- const: mediatek,mt8188
- items:
- enum:
+ - grinn,genio-700-sbc
- mediatek,mt8390-evk
- const: mediatek,mt8390
- const: mediatek,mt8188
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml
index 45d4a66..f3a761c 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml
@@ -23,6 +23,7 @@
- mediatek,mt7622-audsys
- mediatek,mt8167-audsys
- mediatek,mt8173-audsys
+ - mediatek,mt8183-audiosys
- mediatek,mt8183-audsys
- mediatek,mt8186-audsys
- mediatek,mt8192-audsys
@@ -41,13 +42,26 @@
const: 1
audio-controller:
- $ref: /schemas/sound/mediatek,mt2701-audio.yaml#
type: object
required:
- compatible
- '#clock-cells'
+if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8183-audiosys
+then:
+ properties:
+ audio-controller:
+ $ref: /schemas/sound/mediatek,mt8183-audio.yaml#
+else:
+ properties:
+ audio-controller:
+ $ref: /schemas/sound/mediatek,mt2701-audio.yaml#
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
index f1bd6f5..6b7f5e6 100644
--- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
+++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -7,7 +7,7 @@
title: NXP LPC32xx Platforms
maintainers:
- - Roland Stigge <stigge@antcom.de>
+ - Vladimir Zapolskiy <vz@mleia.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index 295963a..f47baaef 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -28,6 +28,10 @@
- arm,arm1136-pmu
- arm,arm1176-pmu
- arm,arm11mpcore-pmu
+ - arm,c1-nano-pmu
+ - arm,c1-premium-pmu
+ - arm,c1-pro-pmu
+ - arm,c1-ultra-pmu
- arm,cortex-a5-pmu
- arm,cortex-a7-pmu
- arm,cortex-a8-pmu
@@ -48,11 +52,14 @@
- arm,cortex-a76-pmu
- arm,cortex-a77-pmu
- arm,cortex-a78-pmu
+ - arm,cortex-a320-pmu
- arm,cortex-a510-pmu
- arm,cortex-a520-pmu
+ - arm,cortex-a520ae-pmu
- arm,cortex-a710-pmu
- arm,cortex-a715-pmu
- arm,cortex-a720-pmu
+ - arm,cortex-a720ae-pmu
- arm,cortex-a725-pmu
- arm,cortex-x1-pmu
- arm,cortex-x2-pmu
diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
index a77d68d..2726103 100644
--- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -23,7 +23,9 @@
select:
properties:
compatible:
- pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
+ oneOf:
+ - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
+ - pattern: "^qcom,.*(glymur|milos).*$"
required:
- compatible
@@ -34,6 +36,7 @@
- pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+(pro)?-.*$"
- pattern: "^qcom,sar[0-9]+[a-z]?-.*$"
- pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
+ - pattern: "^qcom,(glymur|milos)-.*$"
# Legacy namings - variations of existing patterns/compatibles are OK,
# but do not add completely new entries to these:
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ae43b35..18b5ed0 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -10,100 +10,6 @@
- Bjorn Andersson <bjorn.andersson@linaro.org>
description: |
- For devices using the Qualcomm SoC the "compatible" properties consists of
- one or several "manufacturer,model" strings, describing the device itself,
- followed by one or several "qcom,<SoC>" strings, describing the SoC used in
- the device.
-
- The 'SoC' element must be one of the following strings:
-
- apq8016
- apq8026
- apq8064
- apq8074
- apq8084
- apq8094
- apq8096
- ipq4018
- ipq4019
- ipq5018
- ipq5332
- ipq5424
- ipq6018
- ipq8064
- ipq8074
- ipq9574
- mdm9615
- msm8226
- msm8660
- msm8916
- msm8917
- msm8926
- msm8929
- msm8939
- msm8953
- msm8956
- msm8960
- msm8974
- msm8974pro
- msm8976
- msm8992
- msm8994
- msm8996
- msm8996pro
- msm8998
- qcs404
- qcs615
- qcs8300
- qcs8550
- qcm2290
- qcm6490
- qcs9100
- qdu1000
- qrb2210
- qrb4210
- qru1000
- sa8155p
- sa8540p
- sa8775p
- sar2130p
- sc7180
- sc7280
- sc8180x
- sc8280xp
- sda660
- sdm450
- sdm630
- sdm632
- sdm636
- sdm660
- sdm670
- sdm845
- sdx55
- sdx65
- sdx75
- sm4250
- sm4450
- sm6115
- sm6115p
- sm6125
- sm6350
- sm6375
- sm7125
- sm7150
- sm7225
- sm7325
- sm8150
- sm8250
- sm8350
- sm8450
- sm8550
- sm8650
- sm8750
- x1e78100
- x1e80100
- x1p42100
-
There are many devices in the list below that run the standard ChromeOS
bootloader setup and use the open source depthcharge bootloader to boot the
OS. These devices use the bootflow explained at
@@ -205,6 +111,12 @@
- items:
- enum:
+ - sony,huashan
+ - const: qcom,msm8960t
+ - const: qcom,msm8960
+
+ - items:
+ - enum:
- lge,hammerhead
- samsung,hlte
- sony,xperia-amami
@@ -281,6 +193,7 @@
- items:
- enum:
+ - flipkart,rimob
- motorola,potter
- xiaomi,daisy
- xiaomi,mido
@@ -424,6 +337,7 @@
- items:
- enum:
- fairphone,fp5
+ - particle,tachyon
- qcom,qcm6490-idp
- qcom,qcs6490-rb3gen2
- shift,otter
@@ -942,6 +856,7 @@
- items:
- enum:
+ - qcom,monaco-evk
- qcom,qcs8300-ride
- const: qcom,qcs8300
@@ -949,6 +864,7 @@
- enum:
- qcom,qcs615-ride
- const: qcom,qcs615
+ - const: qcom,sm6150
- items:
- enum:
@@ -969,6 +885,7 @@
- items:
- enum:
+ - qcom,lemans-evk
- qcom,qcs9100-ride
- qcom,qcs9100-ride-r3
- const: qcom,qcs9100
@@ -976,9 +893,6 @@
- items:
- enum:
- - google,cheza
- - google,cheza-rev1
- - google,cheza-rev2
- lenovo,yoga-c630
- lg,judyln
- lg,judyp
@@ -1076,6 +990,8 @@
- qcom,qrb5165-rb5
- qcom,sm8250-hdk
- qcom,sm8250-mtp
+ - samsung,r8q
+ - samsung,x1q
- sony,pdx203-generic
- sony,pdx206-generic
- xiaomi,elish
@@ -1095,6 +1011,7 @@
- enum:
- qcom,sm8450-hdk
- qcom,sm8450-qrd
+ - samsung,r0q
- sony,pdx223
- sony,pdx224
- const: qcom,sm8450
@@ -1146,6 +1063,8 @@
- enum:
- asus,vivobook-s15
- asus,zenbook-a14-ux3407ra
+ - dell,inspiron-14-plus-7441
+ - dell,latitude-7455
- dell,xps13-9345
- hp,elitebook-ultra-g1q
- hp,omnibook-x14
@@ -1158,7 +1077,15 @@
- items:
- enum:
+ - qcom,hamoa-iot-evk
+ - const: qcom,hamoa-iot-som
+ - const: qcom,x1e80100
+
+ - items:
+ - enum:
- asus,zenbook-a14-ux3407qa
+ - hp,omnibook-x14-fe1
+ - lenovo,thinkbook-16
- qcom,x1p42100-crd
- const: qcom,x1p42100
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 28db6bd..6aceaa8 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -54,6 +54,11 @@
- const: ariaboard,photonicat
- const: rockchip,rk3568
+ - description: ArmSoM Sige1 board
+ items:
+ - const: armsom,sige1
+ - const: rockchip,rk3528
+
- description: ArmSoM Sige5 board
items:
- const: armsom,sige5
@@ -253,6 +258,11 @@
- const: firefly,roc-rk3576-pc
- const: rockchip,rk3576
+ - description: Firefly ROC-RK3588-RT
+ items:
+ - const: firefly,roc-rk3588-rt
+ - const: rockchip,rk3588
+
- description: Firefly Station M2
items:
- const: firefly,rk3566-roc-pc
@@ -320,6 +330,11 @@
- friendlyarm,nanopi-r6s
- const: rockchip,rk3588s
+ - description: FriendlyElec NanoPi Zero2
+ items:
+ - const: friendlyarm,nanopi-zero2
+ - const: rockchip,rk3528
+
- description: FriendlyElec NanoPC T6 series boards
items:
- enum:
@@ -683,6 +698,13 @@
- const: hardkernel,odroid-m2
- const: rockchip,rk3588s
+ - description: HINLINK H66K / H68K
+ items:
+ - enum:
+ - hinlink,h66k
+ - hinlink,h68k
+ - const: rockchip,rk3568
+
- description: Hugsun X99 TV Box
items:
- const: hugsun,x99
@@ -881,6 +903,13 @@
- const: radxa,rock
- const: rockchip,rk3188
+ - description: Radxa ROCK 2A/2F
+ items:
+ - enum:
+ - radxa,rock-2a
+ - radxa,rock-2f
+ - const: rockchip,rk3528
+
- description: Radxa ROCK Pi 4A/A+/B/B+/C
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index 26fe899..f8e20e60 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -14,12 +14,6 @@
const: '/'
compatible:
oneOf:
- - description: S3C2416 based boards
- items:
- - enum:
- - samsung,smdk2416 # Samsung SMDK2416
- - const: samsung,s3c2416
-
- description: S3C6410 based boards
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
index 842def3..1773588 100644
--- a/Documentation/devicetree/bindings/arm/sti.yaml
+++ b/Documentation/devicetree/bindings/arm/sti.yaml
@@ -15,11 +15,7 @@
compatible:
oneOf:
- items:
- - const: st,stih407-b2120
- - const: st,stih407
- - items:
- enum:
- - st,stih410-b2120
- st,stih410-b2260
- const: st,stih410
- items:
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index c25a22f..9e4627f 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -595,6 +595,14 @@
- const: netcube,kumquat
- const: allwinner,sun8i-v3s
+ - description: NetCube Systems Nagami SoM based boards
+ items:
+ - enum:
+ - netcube,nagami-basic-carrier
+ - netcube,nagami-keypad-carrier
+ - const: netcube,nagami
+ - const: allwinner,sun8i-t113s
+
- description: NextThing Co. CHIP
items:
- const: nextthing,chip
@@ -963,6 +971,11 @@
- const: hechuang,x96-mate
- const: allwinner,sun50i-h616
+ - description: X96Q
+ items:
+ - const: amediatech,x96q
+ - const: allwinner,sun50i-h616
+
- description: X96Q Pro+
items:
- const: amediatech,x96q-pro-plus
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
deleted file mode 100644
index f53c430f..0000000
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-Synaptics SoC Device Tree Bindings
-
-According to https://www.synaptics.com/company/news/conexant-marvell
-Synaptics has acquired the Multimedia Solutions Business of Marvell, so
-berlin SoCs are now Synaptics' SoCs now.
-
----------------------------------------------------------------
-
-Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
-shall have the following properties:
-
-* Required root node properties:
-compatible: must contain "marvell,berlin"
-
-In addition, the above compatible shall be extended with the specific
-SoC and board used. Currently known SoC compatibles are:
- "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100),
- "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005)
- "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????)
- "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114)
- "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????)
-
-* Example:
-
-/ {
- model = "Sony NSZ-GS7";
- compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
- ...
-}
-
-* Marvell Berlin CPU control bindings
-
-CPU control register allows various operations on CPUs, like resetting them
-independently.
-
-Required properties:
-- compatible: should be "marvell,berlin-cpu-ctrl"
-- reg: address and length of the register set
-
-Example:
-
-cpu-ctrl@f7dd0000 {
- compatible = "marvell,berlin-cpu-ctrl";
- reg = <0xf7dd0000 0x10000>;
-};
-
-* Marvell Berlin2 chip control binding
-
-Marvell Berlin SoCs have a chip control register set providing several
-individual registers dealing with pinmux, padmux, clock, reset, and secondary
-CPU boot address. Unfortunately, the individual registers are spread among the
-chip control registers, so there should be a single DT node only providing the
-different functions which are described below.
-
-Required properties:
-- compatible:
- * the first and second values must be:
- "simple-mfd", "syscon"
-- reg: address and length of following register sets for
- BG2/BG2CD: chip control register set
- BG2Q: chip control register set and cpu pll registers
-
-* Marvell Berlin2 system control binding
-
-Marvell Berlin SoCs have a system control register set providing several
-individual registers dealing with pinmux, padmux, and reset.
-
-Required properties:
-- compatible:
- * the first and second values must be:
- "simple-mfd", "syscon"
-- reg: address and length of the system control register set
-
-Example:
-
-chip: chip-control@ea0000 {
- compatible = "simple-mfd", "syscon";
- reg = <0xea0000 0x400>;
-
- /* sub-device nodes */
-};
-
-sysctrl: system-controller@d000 {
- compatible = "simple-mfd", "syscon";
- reg = <0xd000 0x100>;
-
- /* sub-device nodes */
-};
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 1634dab..6139407 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -36,8 +36,12 @@
- toradex,colibri_t20-iris
- const: toradex,colibri_t20
- const: nvidia,tegra20
- - items:
- - const: asus,tf101
+ - description: ASUS Transformers T20 Device family
+ items:
+ - enum:
+ - asus,sl101
+ - asus,tf101
+ - asus,tf101g
- const: nvidia,tegra20
- items:
- const: acer,picasso
@@ -174,6 +178,10 @@
- const: google,nyan-big
- const: google,nyan
- const: nvidia,tegra124
+ - description: Xiaomi Mi Pad (A0101)
+ items:
+ - const: xiaomi,mocha
+ - const: nvidia,tegra124
- items:
- enum:
- nvidia,darcy
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index e80c653..0105dcd 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -58,6 +58,13 @@
- ti,am62-lp-sk
- const: ti,am625
+ - description: K3 AM6254atl SiP
+ items:
+ - enum:
+ - ti,am6254atl-sk
+ - const: ti,am6254atl
+ - const: ti,am625
+
- description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards
items:
- enum:
@@ -106,6 +113,12 @@
- const: toradex,verdin-am62p # Verdin AM62P Module
- const: ti,am62p5
+ - description: K3 AM62P5 SoC Variscite SOM and Carrier Boards
+ items:
+ - const: variscite,var-som-am62p-symphony
+ - const: variscite,var-som-am62p
+ - const: ti,am62p5
+
- description: K3 AM642 SoC
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/ti/ti,keystone.yaml b/Documentation/devicetree/bindings/arm/ti/ti,keystone.yaml
new file mode 100644
index 0000000..20d4084
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/ti,keystone.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/ti,keystone.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Keystone Platforms
+
+maintainers:
+ - Nishanth Menon <nm@ti.com>
+ - Santosh Shilimkar <ssantosh@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - description: K2G
+ items:
+ - enum:
+ - ti,k2g-evm
+ - ti,k2g-ice
+ - const: ti,k2g
+ - const: ti,keystone
+ - description: Keystone 2 Edison
+ items:
+ - enum:
+ - ti,k2e-evm
+ - const: ti,k2e
+ - const: ti,keystone
+ - description: Keystone 2 Lamarr
+ items:
+ - enum:
+ - ti,k2l-evm
+ - const: ti,k2l
+ - const: ti,keystone
+ - description: Keystone 2 Hawking/Kepler
+ items:
+ - enum:
+ - ti,k2hk-evm
+ - const: ti,k2hk
+ - const: ti,keystone
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
index f5f62e9a..58be701 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
@@ -19,6 +19,7 @@
compatible:
enum:
- allwinner,sun55i-a523-ccu
+ - allwinner,sun55i-a523-mcu-ccu
- allwinner,sun55i-a523-r-ccu
reg:
@@ -26,11 +27,11 @@
clocks:
minItems: 4
- maxItems: 5
+ maxItems: 9
clock-names:
minItems: 4
- maxItems: 5
+ maxItems: 9
required:
- "#clock-cells"
@@ -67,6 +68,38 @@
properties:
compatible:
enum:
+ - allwinner,sun55i-a523-mcu-ccu
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: High Frequency Oscillator (usually at 24MHz)
+ - description: Low Frequency Oscillator (usually at 32kHz)
+ - description: Internal Oscillator
+ - description: Audio PLL (4x)
+ - description: Peripherals PLL 0 (300 MHz output)
+ - description: DSP module clock
+ - description: MBUS clock
+ - description: PRCM AHB clock
+ - description: PRCM APB0 clock
+
+ clock-names:
+ items:
+ - const: hosc
+ - const: losc
+ - const: iosc
+ - const: pll-audio0-4x
+ - const: pll-periph0-300m
+ - const: dsp
+ - const: mbus
+ - const: r-ahb
+ - const: r-apb0
+
+ - if:
+ properties:
+ compatible:
+ enum:
- allwinner,sun55i-a523-r-ccu
then:
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml
new file mode 100644
index 0000000..def739f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5424-apss-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APSS IPQ5424 Clock Controller
+
+maintainers:
+ - Varadarajan Narayanan <quic_varada@quicinc.com>
+
+description:
+ The CPU core in ipq5424 is clocked by a huayra PLL with RCG support.
+ The RCG and PLL have a separate register space from the GCC.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq5424-apss-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Reference to the XO clock.
+ - description: Reference to the GPLL0 clock.
+
+ '#clock-cells':
+ const: 1
+
+ '#interconnect-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
+
+ apss_clk: clock-controller@fa80000 {
+ compatible = "qcom,ipq5424-apss-clk";
+ reg = <0x0fa80000 0x20000>;
+ clocks = <&xo_board>,
+ <&gcc GPLL0>;
+ #clock-cells = <1>;
+ #interconnect-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
index 0b27df4..84df3cf 100644
--- a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -26,6 +26,9 @@
clocks:
maxItems: 2
+ clock-names:
+ maxItems: 2
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
index 0a10e10..b98d942 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
@@ -28,6 +28,7 @@
allOf:
- $ref: /schemas/display/lvds-dual-ports.yaml#
+ - $ref: /schemas/sound/dai-common.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
index a7eb260..ba644c3 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -84,7 +84,10 @@
- interrupts
- ports
-additionalProperties: false
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
index 5b9d36f..655db8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
@@ -69,7 +69,10 @@
- vcc-supply
- ports
-additionalProperties: false
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
new file mode 100644
index 0000000..dfa6ff6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE B850v3 video bridge
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+ STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+ The video processing pipeline on the second output on the GE B850v3:
+
+ Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+ Each bridge has a dedicated flash containing firmware for supporting the custom
+ design. The result is that, in this design, neither the STDP4028 nor the
+ STDP2690 behave as the stock bridges would. The compatible strings include the
+ suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+ the firmware specific for the GE B850v3.
+
+ The hardware do not provide control over the video processing pipeline, as the
+ two bridges behaves as a single one. The only interfaces exposed by the
+ hardware are EDID, HPD, and interrupts.
+
+properties:
+ compatible:
+ enum:
+ - megachips,stdp4028-ge-b850v3-fw
+ - megachips,stdp2690-ge-b850v3-fw
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ description: sink port
+ $ref: /schemas/graph.yaml#/properties/port
+
+ port@1:
+ description: source port
+ $ref: /schemas/graph.yaml#/properties/port
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: megachips,stdp4028-ge-b850v3-fw
+ then:
+ required:
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@73 {
+ compatible = "megachips,stdp4028-ge-b850v3-fw";
+ reg = <0x73>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+
+ };
+
+ port@1 {
+ reg = <1>;
+
+ endpoint {
+ remote-endpoint = <&stdp2690_in>;
+ };
+ };
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
deleted file mode 100644
index 09e0a21..0000000
--- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Drivers for the second video output of the GE B850v3:
- STDP4028-ge-b850v3-fw bridges (LVDS-DP)
- STDP2690-ge-b850v3-fw bridges (DP-DP++)
-
-The video processing pipeline on the second output on the GE B850v3:
-
- Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
-
-Each bridge has a dedicated flash containing firmware for supporting the custom
-design. The result is that, in this design, neither the STDP4028 nor the
-STDP2690 behave as the stock bridges would. The compatible strings include the
-suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
-the firmware specific for the GE B850v3.
-
-The hardware do not provide control over the video processing pipeline, as the
-two bridges behaves as a single one. The only interfaces exposed by the
-hardware are EDID, HPD, and interrupts.
-
-stdp4028-ge-b850v3-fw required properties:
- - compatible : "megachips,stdp4028-ge-b850v3-fw"
- - reg : I2C bus address
- - interrupts : one interrupt should be described here, as in
- <0 IRQ_TYPE_LEVEL_HIGH>
- - ports : One input port(reg = <0>) and one output port(reg = <1>)
-
-stdp2690-ge-b850v3-fw required properties:
- compatible : "megachips,stdp2690-ge-b850v3-fw"
- - reg : I2C bus address
- - ports : One input port(reg = <0>) and one output port(reg = <1>)
-
-Example:
-
-&mux2_i2c2 {
- clock-frequency = <100000>;
-
- stdp4028@73 {
- compatible = "megachips,stdp4028-ge-b850v3-fw";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg = <0x73>;
-
- interrupt-parent = <&gpio2>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- stdp4028_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
- port@1 {
- reg = <1>;
- stdp4028_out: endpoint {
- remote-endpoint = <&stdp2690_in>;
- };
- };
- };
- };
-
- stdp2690@72 {
- compatible = "megachips,stdp2690-ge-b850v3-fw";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg = <0x72>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- stdp2690_in: endpoint {
- remote-endpoint = <&stdp4028_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- stdp2690_out: endpoint {
- /* Connector for external display */
- };
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
index b8e9cf6..3fce9e6 100644
--- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -81,7 +81,10 @@
- required:
- ports
-additionalProperties: false
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
index 1509c45..17ea067 100644
--- a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
@@ -109,7 +109,10 @@
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tdp158.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tdp158.yaml
index 1c522f7..721da44 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,tdp158.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tdp158.yaml
@@ -17,6 +17,7 @@
# The reg property is required if and only if the device is connected
# to an I2C bus. In pin strap mode, reg must not be specified.
reg:
+ maxItems: 1
description: I2C address of the device
# Pin 36 = Operation Enable / Reset Pin
diff --git a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
index 22792a7..1f2b449 100644
--- a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
@@ -31,10 +31,32 @@
$ref: /schemas/graph.yaml#/properties/port
description: Connection to controller providing DP signals
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: OF graph representation of signales routed to DP connector
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to controller providing DP signals
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to controller providing AUX signals
+
+ required:
+ - port@0
+ - port@1
+
required:
- compatible
- type
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
additionalProperties: false
@@ -52,4 +74,32 @@
};
};
+ - |
+ /* DP connecttor being driven by the USB+DP combo PHY */
+ connector {
+ compatible = "dp-connector";
+ label = "dp0";
+ type = "full-size";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&phy_ss_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ endpoint {
+ remote-endpoint = <&phy_sbu_out>;
+ };
+ };
+ };
+ };
...
diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
index 67ce103..bb4d6e9 100644
--- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -46,7 +46,7 @@
const: 0
patternProperties:
- "^panel@[0-3]$":
+ "^(panel|bridge)@[0-3]$":
description: Panels connected to the DSI link
type: object
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index b659d79..eb4f276 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -102,6 +102,13 @@
- port@0
- port@1
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: dpi
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
index 71534fe..930c088 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -60,6 +60,18 @@
- port@0
- port@1
+ mediatek,gce-client-reg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: describes how to locate the GCE client register
+ items:
+ - items:
+ - description: Phandle reference to a Mediatek GCE Mailbox
+ - description:
+ GCE subsys id mapping to a client defined in header
+ include/dt-bindings/gce/<chip>-gce.h.
+ - description: offset for the GCE register offset
+ - description: size of the GCE register offset
+
required:
- compatible
- reg
@@ -70,6 +82,7 @@
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
soc {
#address-cells = <2>;
@@ -79,5 +92,6 @@
compatible = "mediatek,mt8173-disp-od";
reg = <0 0x14023000 0 0x1000>;
clocks = <&mmsys CLK_MM_DISP_OD>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
};
};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
index 61a5e22..036a66e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -64,6 +64,18 @@
- port@0
- port@1
+ mediatek,gce-client-reg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: describes how to locate the GCE client register
+ items:
+ - items:
+ - description: Phandle reference to a Mediatek GCE Mailbox
+ - description:
+ GCE subsys id mapping to a client defined in header
+ include/dt-bindings/gce/<chip>-gce.h.
+ - description: offset for the GCE register offset
+ - description: size of the GCE register offset
+
required:
- compatible
- reg
@@ -77,7 +89,9 @@
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
#include <dt-bindings/power/mt8173-power.h>
+
soc {
#address-cells = <2>;
#size-cells = <2>;
@@ -88,5 +102,6 @@
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_UFOE>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
};
};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 1ac1f02..42d9080 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -178,6 +178,8 @@
- innolux,g121xce-l01
# InnoLux 15.6" FHD (1920x1080) TFT LCD panel
- innolux,g156hce-l01
+ # InnoLux 13.3" FHD (1920x1080) TFT LCD panel
+ - innolux,n133hse-ea1
# InnoLux 15.6" WXGA TFT LCD panel
- innolux,n156bge-l21
# Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
@@ -228,6 +230,8 @@
- netron-dy,e231732
# Newhaven Display International 480 x 272 TFT LCD panel
- newhaven,nhd-4.3-480272ef-atxl
+ # NLT Technologies, Ltd. 12.1" WXGA (1280 x 800) LVDS TFT LCD panel
+ - nlt,nl12880bc20-spwg-24
# NLT Technologies, Ltd. 15.6" WXGA (1366×768) LVDS TFT LCD panel
- nlt,nl13676bc25-03f
# New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
index 0881e82..c59df3c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -97,9 +97,11 @@
then:
properties:
clocks:
+ minItems: 2
maxItems: 2
clock-names:
+ minItems: 2
maxItems: 2
- if:
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
index 0752317..ff68503 100644
--- a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
@@ -15,7 +15,6 @@
properties:
compatible:
enum:
- - samsung,s3c2443-fimd
- samsung,s3c6400-fimd
- samsung,s5pv210-fimd
- samsung,exynos3250-fimd
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
index 2181855..644f42b 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -70,9 +70,6 @@
ranges:
maxItems: 1
- avdd-dsi-csi-supply:
- description: DSI/CSI power supply. Must supply 1.2 V.
-
vip:
$ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
index fa07a40..37f6129 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -37,6 +37,9 @@
- const: cile
- const: csi_tpg
+ avdd-dsi-csi-supply:
+ description: DSI/CSI power supply. Must supply 1.2 V.
+
power-domains:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt b/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
deleted file mode 100644
index f96083c..0000000
--- a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-OPA362 analog video amplifier
-
-Required properties:
-- compatible: "ti,opa362"
-- enable-gpios: enable/disable output gpio
-
-Required node:
-- Video port 0 for opa362 input
-- Video port 1 for opa362 output
-
-Example:
-
-tv_amp: opa362 {
- compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- opa_in: endpoint@0 {
- remote-endpoint = <&venc_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- opa_out: endpoint@0 {
- remote-endpoint = <&tv_connector_in>;
- };
- };
- };
-};
-
-
-
diff --git a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
index ec4634c..3d787de 100644
--- a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
+++ b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
@@ -53,6 +53,7 @@
properties:
compatible:
enum:
+ - altr,sdram-edac
- altr,sdram-edac-a10
- altr,sdram-edac-s10
diff --git a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
new file mode 100644
index 0000000..9afc782
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/apm,xgene-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC EDAC
+
+maintainers:
+ - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description: >
+ EDAC node is defined to describe on-chip error detection and correction.
+
+ The following error types are supported:
+
+ memory controller - Memory controller
+ PMD (L1/L2) - Processor module unit (PMD) L1/L2 cache
+ L3 - L3 cache controller
+ SoC - SoC IPs such as Ethernet, SATA, etc
+
+properties:
+ compatible:
+ const: apm,xgene-edac
+
+ reg:
+ items:
+ - description: CPU bus (PCP) resource
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 2
+
+ ranges: true
+
+ interrupts:
+ description: Interrupt-specifier for MCU, PMD, L3, or SoC error IRQ(s).
+ items:
+ - description: MCU error IRQ
+ - description: PMD error IRQ
+ - description: L3 error IRQ
+ - description: SoC error IRQ
+ minItems: 1
+
+ regmap-csw:
+ description: Regmap of the CPU switch fabric (CSW) resource.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ regmap-mcba:
+ description: Regmap of the MCB-A (memory bridge) resource.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ regmap-mcbb:
+ description: Regmap of the MCB-B (memory bridge) resource.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ regmap-efuse:
+ description: Regmap of the PMD efuse resource.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ regmap-rb:
+ description: Regmap of the register bus resource (optional for compatibility).
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - regmap-csw
+ - regmap-mcba
+ - regmap-mcbb
+ - regmap-efuse
+ - reg
+ - interrupts
+
+# Child-node bindings
+patternProperties:
+ '^edacmc@':
+ description: Memory controller subnode
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: apm,xgene-edac-mc
+
+ reg:
+ maxItems: 1
+
+ memory-controller:
+ description: Instance number of the memory controller.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ required:
+ - compatible
+ - reg
+ - memory-controller
+
+
+ '^edacpmd@':
+ description: PMD subnode
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: apm,xgene-edac-pmd
+
+ reg:
+ maxItems: 1
+
+ pmd-controller:
+ description: Instance number of the PMD controller.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ required:
+ - compatible
+ - reg
+ - pmd-controller
+
+ '^edacl3@':
+ description: L3 subnode
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ enum:
+ - apm,xgene-edac-l3
+ - apm,xgene-edac-l3-v2
+
+ reg:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+
+ '^edacsoc@':
+ description: SoC subnode
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ enum:
+ - apm,xgene-edac-soc
+ - apm,xgene-edac-soc-v1
+
+ reg:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ edac@78800000 {
+ compatible = "apm,xgene-edac";
+ reg = <0x0 0x78800000 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupts = <0x0 0x20 0x4>, <0x0 0x21 0x4>, <0x0 0x27 0x4>;
+
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ regmap-efuse = <&efuse>;
+ regmap-rb = <&rb>;
+
+ edacmc@7e800000 {
+ compatible = "apm,xgene-edac-mc";
+ reg = <0x0 0x7e800000 0x0 0x1000>;
+ memory-controller = <0>;
+ };
+
+ edacpmd@7c000000 {
+ compatible = "apm,xgene-edac-pmd";
+ reg = <0x0 0x7c000000 0x0 0x200000>;
+ pmd-controller = <0>;
+ };
+
+ edacl3@7e600000 {
+ compatible = "apm,xgene-edac-l3";
+ reg = <0x0 0x7e600000 0x0 0x1000>;
+ };
+
+ edacsoc@7e930000 {
+ compatible = "apm,xgene-edac-soc-v1";
+ reg = <0x0 0x7e930000 0x0 0x1000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
deleted file mode 100644
index 1006b04..0000000
--- a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-* APM X-Gene SoC EDAC node
-
-EDAC node is defined to describe on-chip error detection and correction.
-The follow error types are supported:
-
- memory controller - Memory controller
- PMD (L1/L2) - Processor module unit (PMD) L1/L2 cache
- L3 - L3 cache controller
- SoC - SoC IP's such as Ethernet, SATA, and etc
-
-The following section describes the EDAC DT node binding.
-
-Required properties:
-- compatible : Shall be "apm,xgene-edac".
-- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
-- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
-- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
-- regmap-efuse : Regmap of the PMD efuse resource.
-- regmap-rb : Regmap of the register bus resource. This property
- is optional only for compatibility. If the RB
- error conditions are not cleared, it will
- continuously generate interrupt.
-- reg : First resource shall be the CPU bus (PCP) resource.
-- interrupts : Interrupt-specifier for MCU, PMD, L3, or SoC error
- IRQ(s).
-
-Required properties for memory controller subnode:
-- compatible : Shall be "apm,xgene-edac-mc".
-- reg : First resource shall be the memory controller unit
- (MCU) resource.
-- memory-controller : Instance number of the memory controller.
-
-Required properties for PMD subnode:
-- compatible : Shall be "apm,xgene-edac-pmd" or
- "apm,xgene-edac-pmd-v2".
-- reg : First resource shall be the PMD resource.
-- pmd-controller : Instance number of the PMD controller.
-
-Required properties for L3 subnode:
-- compatible : Shall be "apm,xgene-edac-l3" or
- "apm,xgene-edac-l3-v2".
-- reg : First resource shall be the L3 EDAC resource.
-
-Required properties for SoC subnode:
-- compatible : Shall be "apm,xgene-edac-soc-v1" for revision 1 or
- "apm,xgene-edac-l3-soc" for general value reporting
- only.
-- reg : First resource shall be the SoC EDAC resource.
-
-Example:
- csw: csw@7e200000 {
- compatible = "apm,xgene-csw", "syscon";
- reg = <0x0 0x7e200000 0x0 0x1000>;
- };
-
- mcba: mcba@7e700000 {
- compatible = "apm,xgene-mcb", "syscon";
- reg = <0x0 0x7e700000 0x0 0x1000>;
- };
-
- mcbb: mcbb@7e720000 {
- compatible = "apm,xgene-mcb", "syscon";
- reg = <0x0 0x7e720000 0x0 0x1000>;
- };
-
- efuse: efuse@1054a000 {
- compatible = "apm,xgene-efuse", "syscon";
- reg = <0x0 0x1054a000 0x0 0x20>;
- };
-
- rb: rb@7e000000 {
- compatible = "apm,xgene-rb", "syscon";
- reg = <0x0 0x7e000000 0x0 0x10>;
- };
-
- edac@78800000 {
- compatible = "apm,xgene-edac";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- regmap-csw = <&csw>;
- regmap-mcba = <&mcba>;
- regmap-mcbb = <&mcbb>;
- regmap-efuse = <&efuse>;
- regmap-rb = <&rb>;
- reg = <0x0 0x78800000 0x0 0x100>;
- interrupts = <0x0 0x20 0x4>,
- <0x0 0x21 0x4>,
- <0x0 0x27 0x4>;
-
- edacmc@7e800000 {
- compatible = "apm,xgene-edac-mc";
- reg = <0x0 0x7e800000 0x0 0x1000>;
- memory-controller = <0>;
- };
-
- edacpmd@7c000000 {
- compatible = "apm,xgene-edac-pmd";
- reg = <0x0 0x7c000000 0x0 0x200000>;
- pmd-controller = <0>;
- };
-
- edacl3@7e600000 {
- compatible = "apm,xgene-edac-l3";
- reg = <0x0 0x7e600000 0x0 0x1000>;
- };
-
- edacsoc@7e930000 {
- compatible = "apm,xgene-edac-soc-v1";
- reg = <0x0 0x7e930000 0x0 0x1000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/edac/aspeed,ast2400-sdram-edac.yaml b/Documentation/devicetree/bindings/edac/aspeed,ast2400-sdram-edac.yaml
new file mode 100644
index 0000000..0973582
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/aspeed,ast2400-sdram-edac.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/aspeed,ast2400-sdram-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed BMC SoC SDRAM EDAC controller
+
+maintainers:
+ - Stefan Schaeckeler <sschaeck@cisco.com>
+
+description: >
+ The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
+ correction check).
+
+ The memory controller supports SECDED (single bit error correction, double bit
+ error detection) and single bit error auto scrubbing by reserving 8 bits for
+ every 64 bit word (effectively reducing available memory to 8/9).
+
+ Note, the bootloader must configure ECC mode in the memory controller.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-sdram-edac
+ - aspeed,ast2500-sdram-edac
+ - aspeed,ast2600-sdram-edac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ sdram@1e6e0000 {
+ compatible = "aspeed,ast2500-sdram-edac";
+ reg = <0x1e6e0000 0x174>;
+ interrupts = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
deleted file mode 100644
index 8ca9e0a..0000000
--- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Aspeed BMC SoC EDAC node
-
-The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
-correction check).
-
-The memory controller supports SECDED (single bit error correction, double bit
-error detection) and single bit error auto scrubbing by reserving 8 bits for
-every 64 bit word (effectively reducing available memory to 8/9).
-
-Note, the bootloader must configure ECC mode in the memory controller.
-
-
-Required properties:
-- compatible: should be one of
- - "aspeed,ast2400-sdram-edac"
- - "aspeed,ast2500-sdram-edac"
- - "aspeed,ast2600-sdram-edac"
-- reg: sdram controller register set should be <0x1e6e0000 0x174>
-- interrupts: should be AVIC interrupt #0
-
-
-Example:
-
- edac: sdram@1e6e0000 {
- compatible = "aspeed,ast2500-sdram-edac";
- reg = <0x1e6e0000 0x174>;
- interrupts = <0>;
- };
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index c731d50..b04f3cc 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -223,7 +223,7 @@
#
# For multiple 'if' schema, group them under an 'allOf'.
#
-# If the conditionals become too unweldy, then it may be better to just split
+# If the conditionals become too unwieldy, then it may be better to just split
# the binding into separate schema documents.
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
index 2bda2e0..7a5a02d 100644
--- a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
@@ -24,13 +24,19 @@
const: 0x80
protocol@81:
- $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
- unevaluatedProperties: false
+ type: object
+ allOf:
+ - $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+ - $ref: /schemas/input/input.yaml#
+ additionalProperties: false
properties:
reg:
const: 0x81
+ linux,code:
+ default: 116 # KEY_POWER
+
protocol@82:
description:
SCMI CPU Protocol which allows an agent to start or stop a CPU. It is
diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2400-cf-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2400-cf-fsi-master.yaml
new file mode 100644
index 0000000..690b6c93
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2400-cf-fsi-master.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2400-cf-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASpeed ColdFire offloaded GPIO-based FSI master
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+ - $ref: /schemas/fsi/fsi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-cf-fsi-master
+ - aspeed,ast2500-cf-fsi-master
+
+ clock-gpios:
+ maxItems: 1
+ description: GPIO for FSI clock
+
+ data-gpios:
+ maxItems: 1
+ description: GPIO for FSI data signal
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO for enable signal
+
+ trans-gpios:
+ maxItems: 1
+ description: GPIO for voltage translator enable
+
+ mux-gpios:
+ maxItems: 1
+ description:
+ GPIO for pin multiplexing with other functions (eg, external FSI masters)
+
+ memory-region:
+ maxItems: 1
+ description:
+ Reference to the reserved memory for the ColdFire. Must be 2M aligned on
+ AST2400 and 1M aligned on AST2500.
+
+ aspeed,cvic:
+ description: Reference to the CVIC node.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ aspeed,sram:
+ description: Reference to the SRAM node.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - clock-gpios
+ - data-gpios
+ - enable-gpios
+ - trans-gpios
+ - mux-gpios
+ - memory-region
+ - aspeed,cvic
+ - aspeed,sram
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fsi-master {
+ compatible = "aspeed,ast2500-cf-fsi-master";
+ clock-gpios = <&gpio 0>;
+ data-gpios = <&gpio 1>;
+ enable-gpios = <&gpio 2>;
+ trans-gpios = <&gpio 3>;
+ mux-gpios = <&gpio 4>;
+ memory-region = <&coldfire_memory>;
+ aspeed,cvic = <&cvic>;
+ aspeed,sram = <&sram>;
+ };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
deleted file mode 100644
index 3dc752d..0000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for ColdFire offloaded gpio-based FSI master driver
-------------------------------------------------------------------------
-
-Required properties:
- - compatible =
- "aspeed,ast2400-cf-fsi-master" for an AST2400 based system
- or
- "aspeed,ast2500-cf-fsi-master" for an AST2500 based system
-
- - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock
- - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal
- - enable-gpios = <gpio-descriptor>; : GPIO for enable signal
- - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable
- - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other
- functions (eg, external FSI masters)
- - memory-region = <phandle>; : Reference to the reserved memory for
- the ColdFire. Must be 2M aligned on
- AST2400 and 1M aligned on AST2500
- - aspeed,sram = <phandle>; : Reference to the SRAM node.
- - aspeed,cvic = <phandle>; : Reference to the CVIC node.
-
-Examples:
-
- fsi-master {
- compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
-
- clock-gpios = <&gpio 0>;
- data-gpios = <&gpio 1>;
- enable-gpios = <&gpio 2>;
- trans-gpios = <&gpio 3>;
- mux-gpios = <&gpio 4>;
-
- memory-region = <&coldfire_memory>;
- aspeed,sram = <&sram>;
- aspeed,cvic = <&cvic>;
- }
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
deleted file mode 100644
index 1e44245..0000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-tree bindings for gpio-based FSI master driver
------------------------------------------------------
-
-Required properties:
- - compatible = "fsi-master-gpio";
- - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock
- - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal
-
-Optional properties:
- - enable-gpios = <gpio-descriptor>; : GPIO for enable signal
- - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable
- - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other
- functions (eg, external FSI masters)
- - no-gpio-delays; : Don't add extra delays between GPIO
- accesses. This is useful when the HW
- GPIO block is running at a low enough
- frequency.
-
-Examples:
-
- fsi-master {
- compatible = "fsi-master-gpio", "fsi-master";
- clock-gpios = <&gpio 0>;
- data-gpios = <&gpio 1>;
- enable-gpios = <&gpio 2>;
- trans-gpios = <&gpio 3>;
- mux-gpios = <&gpio 4>;
- }
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
new file mode 100644
index 0000000..21bfbad
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-master-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: fsi-master-gpio
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+ - $ref: /schemas/fsi/fsi-controller.yaml
+
+properties:
+ compatible:
+ items:
+ - const: fsi-master-gpio
+
+ clock-gpios:
+ description: GPIO for FSI clock
+ maxItems: 1
+
+ data-gpios:
+ description: GPIO for FSI data signal
+ maxItems: 1
+
+ enable-gpios:
+ description: GPIO for enable signal
+ maxItems: 1
+
+ trans-gpios:
+ description: GPIO for voltage translator enable
+ maxItems: 1
+
+ mux-gpios:
+ description: GPIO for pin multiplexing with other functions (eg, external
+ FSI masters)
+ maxItems: 1
+
+ no-gpio-delays:
+ description:
+ Don't add extra delays between GPIO accesses. This is useful when the HW
+ GPIO block is running at a low enough frequency.
+ type: boolean
+
+required:
+ - compatible
+ - clock-gpios
+ - data-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fsi-master {
+ compatible = "fsi-master-gpio";
+ clock-gpios = <&gpio 0>;
+ data-gpios = <&gpio 1>;
+ enable-gpios = <&gpio 2>;
+ trans-gpios = <&gpio 3>;
+ mux-gpios = <&gpio 4>;
+ };
diff --git a/Documentation/devicetree/bindings/goldfish/pipe.txt b/Documentation/devicetree/bindings/goldfish/pipe.txt
index e417a31..5637ce7 100644
--- a/Documentation/devicetree/bindings/goldfish/pipe.txt
+++ b/Documentation/devicetree/bindings/goldfish/pipe.txt
@@ -1,6 +1,6 @@
Android Goldfish QEMU Pipe
-Andorid pipe virtual device generated by android emulator.
+Android pipe virtual device generated by android emulator.
Required properties:
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index d82c322..b37dbb1 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -35,8 +35,8 @@
<&gpio1 15 0>;
In the above example, &gpio1 uses 2 cells to specify a gpio. The first cell is
-a local offset to the GPIO line and the second cell represent consumer flags,
-such as if the consumer desire the line to be active low (inverted) or open
+a local offset to the GPIO line and the second cell represents consumer flags,
+such as if the consumer desires the line to be active low (inverted) or open
drain. This is the recommended practice.
The exact meaning of each specifier cell is controller specific, and must be
@@ -59,7 +59,7 @@
Optional standard bitfield specifiers for the last cell:
- Bit 0: 0 means active high, 1 means active low
-- Bit 1: 0 mean push-pull wiring, see:
+- Bit 1: 0 means push-pull wiring, see:
https://en.wikipedia.org/wiki/Push-pull_output
1 means single-ended wiring, see:
https://en.wikipedia.org/wiki/Single-ended_triode
@@ -176,7 +176,7 @@
In either case placeholders are discouraged: rather use the "" (blank
string) if the use of the GPIO line is undefined in your design. Ideally,
-try to add comments to the dts file describing the naming the convention
+try to add comments to the dts file describing the naming convention
you have chosen, and specifying from where the names are derived.
The names are assigned starting from line offset 0, from left to right,
@@ -304,7 +304,7 @@
It is also possible to use pin groups for gpio ranges when pin groups are the
easiest and most convenient mapping.
-Both both <pinctrl-base> and <count> must set to 0 when using named pin groups
+Both <pinctrl-base> and <count> must be set to 0 when using named pin groups
names.
The property gpio-ranges-group-names must contain exactly one string for each
@@ -313,7 +313,7 @@
Elements of gpio-ranges-group-names must contain the name of a pin group
defined in the respective pin controller. The number of pins/GPIO lines in the
range is the number of pins in that pin group. The number of pins of that
-group is defined int the implementation and not in the device tree.
+group is defined in the implementation and not in the device tree.
If numerical and named pin groups are mixed, the string corresponding to a
numerical pin range in gpio-ranges-group-names must be empty.
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 48daba2..a719262 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -53,8 +53,10 @@
- enum:
- rockchip,rk3399-mali
- const: arm,mali-t860
-
- # "arm,mali-t880"
+ - items:
+ - enum:
+ - samsung,exynos8890-mali
+ - const: arm,mali-t880
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/aspeed,ast2400-gfx.yaml b/Documentation/devicetree/bindings/gpu/aspeed,ast2400-gfx.yaml
new file mode 100644
index 0000000..20a4e00
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/aspeed,ast2400-gfx.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/aspeed,ast2400-gfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED GFX Display Controller
+
+maintainers:
+ - Joel Stanley <joel@jms.id.au>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - aspeed,ast2400-gfx
+ - aspeed,ast2500-gfx
+ - aspeed,ast2600-gfx
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ memory-region:
+ maxItems: 1
+ description:
+ a reserved-memory region to use for the framebuffer.
+
+ syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to SCU
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+ - memory-region
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+
+ display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_CRT1>;
+ interrupts = <0x19>;
+ memory-region = <&gfx_memory>;
+ };
diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
deleted file mode 100644
index 958bdf9..0000000
--- a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Device tree configuration for the GFX display device on the ASPEED SoCs
-
-Required properties:
- - compatible
- * Must be one of the following:
- + aspeed,ast2500-gfx
- + aspeed,ast2400-gfx
- * In addition, the ASPEED pinctrl bindings require the 'syscon' property to
- be present
-
- - reg: Physical base address and length of the GFX registers
-
- - interrupts: interrupt number for the GFX device
-
- - clocks: clock number used to generate the pixel clock
-
- - resets: reset line that must be released to use the GFX device
-
- - memory-region:
- Phandle to a memory region to allocate from, as defined in
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-
-
-Example:
-
-gfx: display@1e6e6000 {
- compatible = "aspeed,ast2500-gfx", "syscon";
- reg = <0x1e6e6000 0x1000>;
- reg-io-width = <4>;
- clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
- resets = <&syscon ASPEED_RESET_CRT1>;
- interrupts = <0x19>;
- memory-region = <&gfx_memory>;
-};
-
-gfx_memory: framebuffer {
- size = <0x01000000>;
- alignment = <0x01000000>;
- compatible = "shared-dma-pool";
- reusable;
-};
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
deleted file mode 100644
index cc6ce52..0000000
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-NVIDIA Tegra Graphics Processing Units
-
-Required properties:
-- compatible: "nvidia,<gpu>"
- Currently recognized values:
- - nvidia,gk20a
- - nvidia,gm20b
- - nvidia,gp10b
- - nvidia,gv11b
-- reg: Physical base address and length of the controller's registers.
- Must contain two entries:
- - first entry for bar0
- - second entry for bar1
-- interrupts: Must contain an entry for each entry in interrupt-names.
- See ../interrupt-controller/interrupts.txt for details.
-- interrupt-names: Must include the following entries:
- - stall
- - nonstall
-- vdd-supply: regulator for supply voltage. Only required for GPUs not using
- power domains.
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - gpu
- - pwr
-If the compatible string is "nvidia,gm20b", then the following clock
-is also required:
- - ref
-If the compatible string is "nvidia,gv11b", then the following clock is also
-required:
- - fuse
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - gpu
-- power-domains: GPUs that make use of power domains can define this property
- instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.
-
-Optional properties:
-- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
-
-Example for GK20A:
-
- gpu@57000000 {
- compatible = "nvidia,gk20a";
- reg = <0x0 0x57000000 0x0 0x01000000>,
- <0x0 0x58000000 0x0 0x01000000>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "stall", "nonstall";
- vdd-supply = <&vdd_gpu>;
- clocks = <&tegra_car TEGRA124_CLK_GPU>,
- <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
- clock-names = "gpu", "pwr";
- resets = <&tegra_car 184>;
- reset-names = "gpu";
- iommus = <&mc TEGRA_SWGROUP_GPU>;
- };
-
-Example for GM20B:
-
- gpu@57000000 {
- compatible = "nvidia,gm20b";
- reg = <0x0 0x57000000 0x0 0x01000000>,
- <0x0 0x58000000 0x0 0x01000000>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "stall", "nonstall";
- clocks = <&tegra_car TEGRA210_CLK_GPU>,
- <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
- <&tegra_car TEGRA210_CLK_PLL_G_REF>;
- clock-names = "gpu", "pwr", "ref";
- resets = <&tegra_car 184>;
- reset-names = "gpu";
- iommus = <&mc TEGRA_SWGROUP_GPU>;
- };
-
-Example for GP10B:
-
- gpu@17000000 {
- compatible = "nvidia,gp10b";
- reg = <0x0 0x17000000 0x0 0x1000000>,
- <0x0 0x18000000 0x0 0x1000000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "stall", "nonstall";
- clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
- <&bpmp TEGRA186_CLK_GPU>;
- clock-names = "gpu", "pwr";
- resets = <&bpmp TEGRA186_RESET_GPU>;
- reset-names = "gpu";
- power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
- iommus = <&smmu TEGRA186_SID_GPU>;
- };
-
-Example for GV11B:
-
- gpu@17000000 {
- compatible = "nvidia,gv11b";
- reg = <0x17000000 0x1000000>,
- <0x18000000 0x1000000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "stall", "nonstall";
- clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
- <&bpmp TEGRA194_CLK_GPU_PWR>,
- <&bpmp TEGRA194_CLK_FUSE>;
- clock-names = "gpu", "pwr", "fuse";
- resets = <&bpmp TEGRA194_RESET_GPU>;
- reset-names = "gpu";
- dma-coherent;
-
- power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
- iommus = <&smmu TEGRA194_SID_GPU>;
- };
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.yaml b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.yaml
new file mode 100644
index 0000000..4d856a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/nvidia,gk20a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Graphics Processing Units
+
+maintainers:
+ - Alexandre Courbot <acourbot@nvidia.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <treding@nvidia.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,gk20a
+ - nvidia,gm20b
+ - nvidia,gp10b
+ - nvidia,gv11b
+
+ reg:
+ items:
+ - description: Bar0 register window
+ - description: Bar1 register window
+
+ interrupts:
+ items:
+ - description: Stall interrupt
+ - description: Nonstall interrupt
+
+ interrupt-names:
+ items:
+ - const: stall
+ - const: nonstall
+
+ vdd-supply:
+ description:
+ Regulator for GPU supply voltage
+
+ clocks:
+ minItems: 2
+ items:
+ - description: GPU clock
+ - description: Power clock
+ - description: Reference or fuse clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: gpu
+ - const: pwr
+ - enum: [ ref, fuse ]
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: gpu
+
+ power-domains:
+ maxItems: 1
+
+ interconnects:
+ minItems: 4
+ maxItems: 12
+
+ interconnect-names:
+ minItems: 4
+ maxItems: 12
+
+ iommus:
+ maxItems: 1
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,gp10b
+ - nvidia,gv11b
+ then:
+ required:
+ - power-domains
+ else:
+ properties:
+ interconnects: false
+ interconnect-names: false
+
+ required:
+ - vdd-supply
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,gp10b
+ then:
+ properties:
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ items:
+ - const: dma-mem
+ - const: write-0
+ - const: read-1
+ - const: write-1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,gv11b
+ then:
+ properties:
+ interconnects:
+ minItems: 12
+
+ interconnect-names:
+ items:
+ - const: dma-mem
+ - const: read-0-hp
+ - const: write-0
+ - const: read-1
+ - const: read-1-hp
+ - const: write-1
+ - const: read-2
+ - const: read-2-hp
+ - const: write-2
+ - const: read-3
+ - const: read-3-hp
+ - const: write-3
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/tegra124-car-common.h>
+ #include <dt-bindings/memory/tegra124-mc.h>
+
+ gpu@57000000 {
+ compatible = "nvidia,gk20a";
+ reg = <0x57000000 0x01000000>,
+ <0x58000000 0x01000000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+ vdd-supply = <&vdd_gpu>;
+ clocks = <&tegra_car TEGRA124_CLK_GPU>,
+ <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+ clock-names = "gpu", "pwr";
+ resets = <&tegra_car 184>;
+ reset-names = "gpu";
+ iommus = <&mc TEGRA_SWGROUP_GPU>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
index 32c3b69..51241c1 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -85,6 +85,12 @@
the previous generations, but have a different parent clock and hence
the timing parameters are configured differently.
const: nvidia,tegra256-i2c
+ - description:
+ Tegra264 has 17 generic I2C controllers, two of which are in the AON
+ (always-on) partition of the SoC. In addition to the features from
+ Tegra194, a SW mutex register is added to support use of the same I2C
+ instance across multiple firmwares.
+ const: nvidia,tegra264-i2c
reg:
maxItems: 1
@@ -192,6 +198,7 @@
enum:
- nvidia,tegra194-i2c
- nvidia,tegra256-i2c
+ - nvidia,tegra264-i2c
then:
required:
- resets
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index 7173c4b..ee4c77d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -59,6 +59,7 @@
- nvidia,tegra186-agic
- nvidia,tegra194-agic
- nvidia,tegra234-agic
+ - nvidia,tegra264-agic
- const: nvidia,tegra210-agic
interrupt-controller: true
diff --git a/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml
index f0d9bbd..6427385 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml
@@ -36,12 +36,27 @@
const: 0
'#interrupt-cells':
- const: 2
+ description:
+ A value of 4 means that interrupt specifiers contain the interrupt-type or
+ type-specific information cells.
+ enum: [ 2, 4 ]
pic-no-reset:
description: Indicates the PIC shall not be reset during runtime initialization.
type: boolean
+ single-cpu-affinity:
+ description:
+ If present, non-IPI interrupts will be routed to a single CPU at a time.
+ type: boolean
+
+ last-interrupt-source:
+ description:
+ Some MPICs do not correctly report the number of hardware sources in the
+ global feature registers. This value, if specified, overrides the value
+ read from MPIC_GREG_FEATURE_LAST_SRC.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
deleted file mode 100644
index a6813a0..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Hisilicon mbigen device tree bindings.
-=======================================
-
-Mbigen means: message based interrupt generator.
-
-MBI is kind of msi interrupt only used on Non-PCI devices.
-
-To reduce the wired interrupt number connected to GIC,
-Hisilicon designed mbigen to collect and generate interrupt.
-
-
-Non-pci devices can connect to mbigen and generate the
-interrupt by writing ITS register.
-
-The mbigen chip and devices connect to mbigen have the following properties:
-
-Mbigen main node required properties:
--------------------------------------------
-- compatible: Should be "hisilicon,mbigen-v2"
-
-- reg: Specifies the base physical address and size of the Mbigen
- registers.
-
-Mbigen sub node required properties:
-------------------------------------------
-- interrupt controller: Identifies the node as an interrupt controller
-
-- msi-parent: Specifies the MSI controller this mbigen use.
- For more detail information,please refer to the generic msi-parent binding in
- Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-- num-pins: the total number of pins implemented in this Mbigen
- instance.
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value must be 2.
-
- The 1st cell is hardware pin number of the interrupt.This number is local to
- each mbigen chip and in the range from 0 to the maximum interrupts number
- of the mbigen.
-
- The 2nd cell is the interrupt trigger type.
- The value of this cell should be:
- 1: rising edge triggered
- or
- 4: high level triggered
-
-Examples:
-
- mbigen_chip_dsa {
- compatible = "hisilicon,mbigen-v2";
- reg = <0x0 0xc0080000 0x0 0x10000>;
-
- mbigen_gmac:intc_gmac {
- interrupt-controller;
- msi-parent = <&its_dsa 0x40b1c>;
- num-pins = <9>;
- #interrupt-cells = <2>;
- };
-
- mbigen_i2c:intc_i2c {
- interrupt-controller;
- msi-parent = <&its_dsa 0x40b0e>;
- num-pins = <2>;
- #interrupt-cells = <2>;
- };
- };
-
-Devices connect to mbigen required properties:
-----------------------------------------------------
--interrupts:Specifies the interrupt source.
- For the specific information of each cell in this property,please refer to
- the "interrupt-cells" description mentioned above.
-
-Examples:
- gmac0: ethernet@c2080000 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0xc2080000 0 0x20000>,
- <0 0xc0000000 0 0x1000>;
- interrupt-parent = <&mbigen_device_gmac>;
- interrupts = <656 1>,
- <657 1>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml
new file mode 100644
index 0000000..326424e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/hisilicon,mbigen-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon mbigen v2
+
+maintainers:
+ - Wei Xu <xuwei5@hisilicon.com>
+
+description: >
+ Mbigen means: message based interrupt generator.
+
+ MBI is kind of msi interrupt only used on Non-PCI devices.
+
+ To reduce the wired interrupt number connected to GIC, Hisilicon designed
+ mbigen to collect and generate interrupt.
+
+ Non-pci devices can connect to mbigen and generate the interrupt by writing
+ ITS register.
+
+properties:
+ compatible:
+ const: hisilicon,mbigen-v2
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties:
+ type: object
+ additionalProperties: false
+
+ properties:
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ msi-parent:
+ maxItems: 1
+
+ num-pins:
+ description: The total number of pins implemented in this Mbigen instance.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - interrupt-controller
+ - "#interrupt-cells"
+ - msi-parent
+ - num-pins
+
+examples:
+ - |
+ mbigen@c0080000 {
+ compatible = "hisilicon,mbigen-v2";
+ reg = <0xc0080000 0x10000>;
+
+ mbigen_gmac: intc_gmac {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ msi-parent = <&its_dsa 0x40b1c>;
+ num-pins = <9>;
+ };
+
+ mbigen_i2c: intc_i2c {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ msi-parent = <&its_dsa 0x40b0e>;
+ num-pins = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
index 9d4f06f..ddfce21 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
@@ -49,6 +49,9 @@
reg:
maxItems: 1
+ '#address-cells':
+ const: 0
+
'#interrupt-cells':
const: 2
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
index f06b40f..38d0c2d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -26,6 +26,7 @@
compatible:
items:
- enum:
+ - qcom,glymur-pdc
- qcom,qcs615-pdc
- qcom,qcs8300-pdc
- qcom,qdu1000-pdc
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 5b827bc..f683d69 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -59,6 +59,7 @@
- items:
- enum:
- canaan,k210-plic
+ - eswin,eic7700-plic
- sifive,fu540-c000-plic
- spacemit,k1-plic
- starfive,jh7100-plic
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
index 75750c64..f49ed8a 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -52,7 +52,7 @@
As above, The Multimedia HW will go through SMI and M4U while it
access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
smi local arbiter and smi common. It will control whether the Multimedia
- HW should go though the m4u for translation or bypass it and talk
+ HW should go through the m4u for translation or bypass it and talk
directly with EMI. And also SMI help control the power domain and clocks for
each local arbiter.
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 3e8319e..274f8328 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -62,7 +62,7 @@
default-state:
description:
The initial state of the LED. If the LED is already on or off and the
- default-state property is set the to same value, then no glitch should be
+ default-state property is set to the same value, then no glitch should be
produced where the LED momentarily turns off (or on). The "keep" setting
will keep the LED at whatever its current state is, without producing a
glitch.
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
deleted file mode 100644
index bf0c998..0000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Broadcom FlexRM Ring Manager
-============================
-The Broadcom FlexRM ring manager provides a set of rings which can be
-used to submit work to offload engines. An SoC may have multiple FlexRM
-hardware blocks. There is one device tree entry per FlexRM block. The
-FlexRM driver will create a mailbox-controller instance for given FlexRM
-hardware block where each mailbox channel is a separate FlexRM ring.
-
-Required properties:
---------------------
-- compatible: Should be "brcm,iproc-flexrm-mbox"
-- reg: Specifies base physical address and size of the FlexRM
- ring registers
-- msi-parent: Phandles (and potential Device IDs) to MSI controllers
- The FlexRM engine will send MSIs (instead of wired
- interrupts) to CPU. There is one MSI for each FlexRM ring.
- Refer devicetree/bindings/interrupt-controller/msi.txt
-- #mbox-cells: Specifies the number of cells needed to encode a mailbox
- channel. This should be 3.
-
- The 1st cell is the mailbox channel number.
-
- The 2nd cell contains MSI completion threshold. This is the
- number of completion messages for which FlexRM will inject
- one MSI interrupt to CPU.
-
- The 3rd cell contains MSI timer value representing time for
- which FlexRM will wait to accumulate N completion messages
- where N is the value specified by 2nd cell above. If FlexRM
- does not get required number of completion messages in time
- specified by this cell then it will inject one MSI interrupt
- to CPU provided at least one completion message is available.
-
-Optional properties:
---------------------
-- dma-coherent: Present if DMA operations made by the FlexRM engine (such
- as DMA descriptor access, access to buffers pointed by DMA
- descriptors and read/write pointer updates to DDR) are
- cache coherent with the CPU.
-
-Example:
---------
-crypto_mbox: mbox@67000000 {
- compatible = "brcm,iproc-flexrm-mbox";
- reg = <0x67000000 0x200000>;
- msi-parent = <&gic_its 0x7f00>;
- #mbox-cells = <3>;
-};
-
-crypto@672c0000 {
- compatible = "brcm,spu2-v2-crypto";
- reg = <0x672c0000 0x1000>;
- mboxes = <&crypto_mbox 0 0x1 0xffff>,
- <&crypto_mbox 1 0x1 0xffff>,
- <&crypto_mbox 16 0x1 0xffff>,
- <&crypto_mbox 17 0x1 0xffff>,
- <&crypto_mbox 30 0x1 0xffff>,
- <&crypto_mbox 31 0x1 0xffff>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml
new file mode 100644
index 0000000..c801bd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,iproc-flexrm-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom FlexRM Ring Manager
+
+maintainers:
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+description:
+ The Broadcom FlexRM ring manager provides a set of rings which can be used to
+ submit work to offload engines. An SoC may have multiple FlexRM hardware
+ blocks. There is one device tree entry per FlexRM block. The FlexRM driver
+ will create a mailbox-controller instance for given FlexRM hardware block
+ where each mailbox channel is a separate FlexRM ring.
+
+properties:
+ compatible:
+ const: brcm,iproc-flexrm-mbox
+
+ reg:
+ maxItems: 1
+
+ msi-parent:
+ maxItems: 1
+
+ '#mbox-cells':
+ description: >
+ The 1st cell is the mailbox channel number.
+
+ The 2nd cell contains MSI completion threshold. This is the number of
+ completion messages for which FlexRM will inject one MSI interrupt to CPU.
+
+ The 3rd cell contains MSI timer value representing time for which FlexRM
+ will wait to accumulate N completion messages where N is the value
+ specified by 2nd cell above. If FlexRM does not get required number of
+ completion messages in time specified by this cell then it will inject one
+ MSI interrupt to CPU provided at least one completion message is
+ available.
+ const: 3
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - msi-parent
+ - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ mailbox@67000000 {
+ compatible = "brcm,iproc-flexrm-mbox";
+ reg = <0x67000000 0x200000>;
+ msi-parent = <&gic_its 0x7f00>;
+ #mbox-cells = <3>;
+ dma-coherent;
+ };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
deleted file mode 100644
index 9bcdf20..0000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-The PDC driver manages data transfer to and from various offload engines
-on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is
-one device tree entry per block. On some chips, the PDC functionality is
-handled by the FA2 (Northstar Plus).
-
-Required properties:
-- compatible : Should be "brcm,iproc-pdc-mbox" or "brcm,iproc-fa2-mbox" for
- FA2/Northstar Plus.
-- reg: Should contain PDC registers location and length.
-- interrupts: Should contain the IRQ line for the PDC.
-- #mbox-cells: 1
-- brcm,rx-status-len: Length of metadata preceding received frames, in bytes.
-
-Optional properties:
-- brcm,use-bcm-hdr: present if a BCM header precedes each frame.
-
-Example:
- pdc0: iproc-pdc0@612c0000 {
- compatible = "brcm,iproc-pdc-mbox";
- reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */
- interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>; /* one cell per mailbox channel */
- brcm,rx-status-len = <32>;
- brcm,use-bcm-hdr;
- };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml
new file mode 100644
index 0000000..5534ae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,iproc-pdc-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PDC mailbox
+
+maintainers:
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+description:
+ The PDC driver manages data transfer to and from various offload engines on
+ some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is one
+ device tree entry per block. On some chips, the PDC functionality is handled
+ by the FA2 (Northstar Plus).
+
+properties:
+ compatible:
+ enum:
+ - brcm,iproc-pdc-mbox
+ - brcm,iproc-fa2-mbox
+
+ reg:
+ maxItems: 1
+
+ dma-coherent: true
+
+ interrupts:
+ maxItems: 1
+
+ '#mbox-cells':
+ const: 1
+
+ brcm,rx-status-len:
+ description:
+ Length of metadata preceding received frames, in bytes.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ brcm,use-bcm-hdr:
+ type: boolean
+ description:
+ Present if a BCM header precedes each frame.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#mbox-cells'
+ - brcm,rx-status-len
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mailbox0@612c0000 {
+ compatible = "brcm,iproc-pdc-mbox";
+ reg = <0x612c0000 0x445>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ brcm,rx-status-len = <32>;
+ brcm,use-bcm-hdr;
+ };
diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt
deleted file mode 100644
index 282ab81..0000000
--- a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* rWTM BIU Mailbox driver for Armada 37xx
-
-Required properties:
-- compatible: must be "marvell,armada-3700-rwtm-mailbox"
-- reg: physical base address of the mailbox and length of memory mapped
- region
-- interrupts: the IRQ line for the mailbox
-- #mbox-cells: must be 1
-
-Example:
- rwtm: mailbox@b0000 {
- compatible = "marvell,armada-3700-rwtm-mailbox";
- reg = <0xb0000 0x100>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml
new file mode 100644
index 0000000..0a07ed1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/marvell,armada-3700-rwtm-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3700 rWTM Mailbox
+
+maintainers:
+ - Marek Behún <kabel@kernel.org>
+
+properties:
+ compatible:
+ const: marvell,armada-3700-rwtm-mailbox
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#mbox-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mailbox@b0000 {
+ compatible = "marvell,armada-3700-rwtm-mailbox";
+ reg = <0xb0000 0x100>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
index 73d6db3..587126d0 100644
--- a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
@@ -60,17 +60,6 @@
- interrupts
- clocks
-allOf:
- - if:
- not:
- properties:
- compatible:
- contains:
- const: mediatek,mt8195-gce
- then:
- required:
- - clock-names
-
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml
new file mode 100644
index 0000000..107bc96
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/rockchip,rk3368-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Mailbox Controller
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+description:
+ The Rockchip mailbox is used by the Rockchip CPU cores to communicate
+ requests to MCU processor.
+
+properties:
+ compatible:
+ const: rockchip,rk3368-mailbox
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: pclk_mailbox
+
+ interrupts:
+ description: One interrupt for each channel
+ maxItems: 4
+
+ '#mbox-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mailbox@ff6b0000 {
+ compatible = "rockchip,rk3368-mailbox";
+ reg = <0xff6b0000 0x1000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt
deleted file mode 100644
index b6bb84a..0000000
--- a/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Rockchip mailbox
-
-The Rockchip mailbox is used by the Rockchip CPU cores to communicate
-requests to MCU processor.
-
-Refer to ./mailbox.txt for generic information about mailbox device-tree
-bindings.
-
-Required properties:
-
- - compatible: should be one of the following.
- - "rockchip,rk3368-mbox" for rk3368
- - reg: physical base address of the controller and length of memory mapped
- region.
- - interrupts: The interrupt number to the cpu. The interrupt specifier format
- depends on the interrupt controller.
- - #mbox-cells: Common mailbox binding property to identify the number
- of cells required for the mailbox specifier. Should be 1
-
-Example:
---------
-
-/* RK3368 */
-mbox: mbox@ff6b0000 {
- compatible = "rockchip,rk3368-mailbox";
- reg = <0x0 0xff6b0000 0x0 0x1000>,
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
new file mode 100644
index 0000000..8a47761
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8173-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8173 Video Processor Unit
+
+maintainers:
+ - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+description:
+ Video Processor Unit is a HW video controller. It controls HW Codec including
+ H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color
+ convert).
+
+properties:
+ compatible:
+ const: mediatek,mt8173-vpu
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: tcm
+ - const: cfg_reg
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: main
+
+ memory-region:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - memory-region
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ vpu: vpu@10020000 {
+ compatible = "mediatek,mt8173-vpu";
+ reg = <0 0x10020000 0 0x30000>,
+ <0 0x10050000 0 0x100>;
+ reg-names = "tcm", "cfg_reg";
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_SCP_SEL>;
+ clock-names = "main";
+ memory-region = <&vpu_dma_reserved>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index 53ef26e..253a93e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -5,7 +5,8 @@
Required properties (controller node):
- compatible: "mediatek,mt8173-mdp"
- mediatek,vpu: the node of video processor unit, see
- Documentation/devicetree/bindings/media/mediatek-vpu.txt for details.
+ Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml for
+ details.
Required properties (all function blocks, child node):
- compatible: Should be one of
diff --git a/Documentation/devicetree/bindings/media/mediatek-vpu.txt b/Documentation/devicetree/bindings/media/mediatek-vpu.txt
deleted file mode 100644
index 2a5bac3..0000000
--- a/Documentation/devicetree/bindings/media/mediatek-vpu.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Mediatek Video Processor Unit
-
-Video Processor Unit is a HW video controller. It controls HW Codec including
-H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).
-
-Required properties:
- - compatible: "mediatek,mt8173-vpu"
- - reg: Must contain an entry for each entry in reg-names.
- - reg-names: Must include the following entries:
- "tcm": tcm base
- "cfg_reg": Main configuration registers base
- - interrupts: interrupt number to the cpu.
- - clocks : clock name from clock manager
- - clock-names: must be main. It is the main clock of VPU
-
-Optional properties:
- - memory-region: phandle to a node describing memory (see
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
- to be used for VPU extended memory; if not present, VPU may be located
- anywhere in the memory
-
-Example:
- vpu: vpu@10020000 {
- compatible = "mediatek,mt8173-vpu";
- reg = <0 0x10020000 0 0x30000>,
- <0 0x10050000 0 0x100>;
- reg-names = "tcm", "cfg_reg";
- interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&topckgen TOP_SCP_SEL>;
- clock-names = "main";
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
new file mode 100644
index 0000000..d65313b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/starfive,jh7110-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 DMC
+
+maintainers:
+ - E Shattow <e@freeshell.de>
+
+description:
+ JH7110 DDR external memory interface LPDDR4/DDR4/DDR3/LPDDR3 32-bit at
+ 2133Mbps (up to 2800Mbps).
+
+properties:
+ compatible:
+ items:
+ - const: starfive,jh7110-dmc
+
+ reg:
+ items:
+ - description: controller registers
+ - description: phy registers
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pll
+
+ resets:
+ items:
+ - description: axi
+ - description: osc
+ - description: apb
+
+ reset-names:
+ items:
+ - const: axi
+ - const: osc
+ - const: apb
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/starfive,jh7110-crg.h>
+ #include <dt-bindings/reset/starfive,jh7110-crg.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ memory-controller@15700000 {
+ compatible = "starfive,jh7110-dmc";
+ reg = <0x0 0x15700000 0x0 0x10000>,
+ <0x0 0x13000000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+ clock-names = "pll";
+ resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+ <&syscrg JH7110_SYSRST_DDR_OSC>,
+ <&syscrg JH7110_SYSRST_DDR_APB>;
+ reset-names = "axi", "osc", "apb";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
deleted file mode 100644
index aea5370..0000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Device tree bindings for Aspeed SoC Display Controller (GFX)
-
-The Aspeed SoC Display Controller primarily does as its name suggests, but also
-participates in pinmux requests on the g5 SoCs. It is therefore considered a
-syscon device.
-
-Required properties:
-- compatible: "aspeed,ast2500-gfx", "syscon"
-- reg: contains offset/length value of the GFX memory
- region.
-
-Example:
-
-gfx: display@1e6e6000 {
- compatible = "aspeed,ast2500-gfx", "syscon";
- reg = <0x1e6e6000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
index ae149eb..ca72786 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
@@ -26,7 +26,7 @@
'#gpio-cells':
description:
The first cell is the pin number.
- The second cell is is used to specify flags.
+ The second cell is used to specify flags.
See ../gpio/gpio.txt for more information.
const: 2
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
index 5167d6e..885e332 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
@@ -26,7 +26,7 @@
'#gpio-cells':
description:
The first cell is the pin number.
- The second cell is is used to specify flags.
+ The second cell is used to specify flags.
See ../gpio/gpio.txt for more information.
const: 2
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
index eca430edf..2b5b54a 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
@@ -28,7 +28,7 @@
'#gpio-cells':
description:
The first cell is the pin number.
- The second cell is is used to specify flags.
+ The second cell is used to specify flags.
See ../gpio/gpio.txt for more information.
const: 2
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
index eee6be7..493655a 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -61,7 +61,7 @@
description: Specifies that controller should use auto CMD12
allOf:
- - $ref: mmc-controller.yaml#
+ - $ref: sdhci-common.yaml#
- if:
properties:
clock-names:
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml
index 7414d55..ebde061 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller-common.yaml
@@ -57,7 +57,7 @@
# latter case. We choose to use the XOR logic for GPIO CD and WP
# lines. This means, the two properties are "superimposed," for
# example leaving the GPIO_ACTIVE_LOW flag clear and specifying the
- # respective *-inverted property property results in a
+ # respective *-inverted property results in a
# double-inversion and actually means the "normal" line polarity is
# in effect.
wp-inverted:
@@ -272,7 +272,7 @@
mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay
waiting for I/O signalling and card power supply to be stable,
regardless of whether pwrseq-simple is used. Default to 10ms if
- no available.
+ not available.
default: 10
supports-cqe:
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 0cd78d7..5c91716 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -149,7 +149,7 @@
- description:
The first register range should be the one of the DWMAC controller
- description:
- The second range is is for the Amlogic specific configuration
+ The second range is for the Amlogic specific configuration
(for example the PRG_ETHERNET register range on Meson8b and newer)
interrupts:
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index c488752..61ef60d 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -50,6 +50,9 @@
- const: hclk
- const: cclk
+ resets:
+ maxItems: 1
+
bosch,mram-cfg:
description: |
Message RAM configuration data.
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 66b1cfb..341f493 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -222,7 +222,7 @@
reg:
maxItems: 1
description:
- This define the LED index in the PHY or the MAC. It's really
+ This defines the LED index in the PHY or the MAC. It's really
driver dependent and required for ports that define multiple
LED for the same port.
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 71e2cd3..2ec2d9f 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -266,7 +266,7 @@
reg:
maxItems: 1
description:
- This define the LED index in the PHY or the MAC. It's really
+ This defines the LED index in the PHY or the MAC. It's really
driver dependent and required for ports that define multiple
LED for the same port.
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
index 2681168..6f7b907 100644
--- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -13,7 +13,7 @@
All skew control options are specified in picoseconds. The minimum
value is 0, the maximum value is 3000, and it can be specified in 200ps
- steps, *but* these values are in not fact what you get because this chip's
+ steps, *but* these values are in no way what you get because this chip's
skew values actually increase in 120ps steps, starting from -840ps. The
incorrect values came from an error in the original KSZ9021 datasheet
before it was corrected in revision 1.2 (Feb 2014), but it is too late to
@@ -153,7 +153,7 @@
- micrel,force-master:
Boolean, force phy to master mode. Only set this option if the phy
reference clock provided at CLK125_NDO pin is used as MAC reference
- clock because the clock jitter in slave mode is to high (errata#2).
+ clock because the clock jitter in slave mode is too high (errata#2).
Attention: The link partner must be configurable as slave otherwise
no link will be established.
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index a407dd1..01622ce 100644
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -26,7 +26,7 @@
Setting the RMII Reference Clock Select bit enables 25 MHz rather
than 50 MHz clock mode.
- Note that this option in only needed for certain PHY revisions with a
+ Note that this option is only needed for certain PHY revisions with a
non-standard, inverted function of this configuration bit.
Specifically, a clock reference ("rmii-ref" below) is always needed to
actually select a mode.
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
index 5434c14..18e7981 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -108,6 +108,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
gic: interrupt-controller {
+ #address-cells = <0>;
interrupt-controller;
#interrupt-cells = <3>;
};
diff --git a/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml b/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml
index 68090b3..8403c79 100644
--- a/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml
@@ -42,6 +42,9 @@
additionalProperties: false
properties:
+ '#address-cells':
+ const: 0
+
interrupt-controller: true
'#interrupt-cells':
@@ -92,6 +95,7 @@
reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
pcie_intc: interrupt-controller {
+ #address-cells = <0>;
interrupt-controller;
#interrupt-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml b/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml
index 7be6953..3d68bfbe 100644
--- a/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml
@@ -101,6 +101,9 @@
additionalProperties: false
properties:
+ '#address-cells':
+ const: 0
+
interrupt-controller: true
'#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
index 638b99d..c07b0ed 100644
--- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -56,6 +56,9 @@
additionalProperties: false
properties:
+ '#address-cells':
+ const: 0
+
interrupt-controller: true
'#interrupt-cells':
@@ -109,6 +112,7 @@
<0 0 0 4 &pcie_intc 3>;
pcie_intc: interrupt-controller {
+ #address-cells = <0>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index 69b499c..c704099 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -99,6 +99,9 @@
additionalProperties: false
properties:
+ '#address-cells':
+ const: 0
+
interrupt-controller: true
'#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/perf/apm,xgene-pmu.yaml b/Documentation/devicetree/bindings/perf/apm,xgene-pmu.yaml
new file mode 100644
index 0000000..314048a
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/apm,xgene-pmu.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/apm,xgene-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC PMU
+
+maintainers:
+ - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description: |
+ This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
+ The following PMU devices are supported:
+
+ L3C - L3 cache controller
+ IOB - IO bridge
+ MCB - Memory controller bridge
+ MC - Memory controller
+
+properties:
+ compatible:
+ enum:
+ - apm,xgene-pmu
+ - apm,xgene-pmu-v2
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regmap-csw:
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ regmap-mcba:
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ regmap-mcbb:
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - regmap-csw
+ - regmap-mcba
+ - regmap-mcbb
+ - reg
+ - interrupts
+
+additionalProperties:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ enum:
+ - apm,xgene-pmu-l3c
+ - apm,xgene-pmu-iob
+ - apm,xgene-pmu-mcb
+ - apm,xgene-pmu-mc
+
+ reg:
+ maxItems: 1
+
+ enable-bit-index:
+ description:
+ Specifies which bit enables the associated resource in MCB or MC subnodes.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 31
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pmu@78810000 {
+ compatible = "apm,xgene-pmu-v2";
+ reg = <0x0 0x78810000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ regmap-csw = <&csw>;
+ regmap-mcba = <&mcba>;
+ regmap-mcbb = <&mcbb>;
+ interrupts = <0x0 0x22 0x4>;
+
+ pmul3c@7e610000 {
+ compatible = "apm,xgene-pmu-l3c";
+ reg = <0x0 0x7e610000 0x0 0x1000>;
+ };
+
+ pmuiob@7e940000 {
+ compatible = "apm,xgene-pmu-iob";
+ reg = <0x0 0x7e940000 0x0 0x1000>;
+ };
+
+ pmucmcb@7e710000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e710000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmcb@7e730000 {
+ compatible = "apm,xgene-pmu-mcb";
+ reg = <0x0 0x7e730000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e810000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e810000 0x0 0x1000>;
+ enable-bit-index = <0>;
+ };
+
+ pmucmc@7e850000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e850000 0x0 0x1000>;
+ enable-bit-index = <1>;
+ };
+
+ pmucmc@7e890000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e890000 0x0 0x1000>;
+ enable-bit-index = <2>;
+ };
+
+ pmucmc@7e8d0000 {
+ compatible = "apm,xgene-pmu-mc";
+ reg = <0x0 0x7e8d0000 0x0 0x1000>;
+ enable-bit-index = <3>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
deleted file mode 100644
index afb11cf6..0000000
--- a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-* APM X-Gene SoC PMU bindings
-
-This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
-The following PMU devices are supported:
-
- L3C - L3 cache controller
- IOB - IO bridge
- MCB - Memory controller bridge
- MC - Memory controller
-
-The following section describes the SoC PMU DT node binding.
-
-Required properties:
-- compatible : Shall be "apm,xgene-pmu" for revision 1 or
- "apm,xgene-pmu-v2" for revision 2.
-- regmap-csw : Regmap of the CPU switch fabric (CSW) resource.
-- regmap-mcba : Regmap of the MCB-A (memory bridge) resource.
-- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource.
-- reg : First resource shall be the CPU bus PMU resource.
-- interrupts : Interrupt-specifier for PMU IRQ.
-
-Required properties for L3C subnode:
-- compatible : Shall be "apm,xgene-pmu-l3c".
-- reg : First resource shall be the L3C PMU resource.
-
-Required properties for IOB subnode:
-- compatible : Shall be "apm,xgene-pmu-iob".
-- reg : First resource shall be the IOB PMU resource.
-
-Required properties for MCB subnode:
-- compatible : Shall be "apm,xgene-pmu-mcb".
-- reg : First resource shall be the MCB PMU resource.
-- enable-bit-index : The bit indicates if the according MCB is enabled.
-
-Required properties for MC subnode:
-- compatible : Shall be "apm,xgene-pmu-mc".
-- reg : First resource shall be the MC PMU resource.
-- enable-bit-index : The bit indicates if the according MC is enabled.
-
-Example:
- csw: csw@7e200000 {
- compatible = "apm,xgene-csw", "syscon";
- reg = <0x0 0x7e200000 0x0 0x1000>;
- };
-
- mcba: mcba@7e700000 {
- compatible = "apm,xgene-mcb", "syscon";
- reg = <0x0 0x7e700000 0x0 0x1000>;
- };
-
- mcbb: mcbb@7e720000 {
- compatible = "apm,xgene-mcb", "syscon";
- reg = <0x0 0x7e720000 0x0 0x1000>;
- };
-
- pmu: pmu@78810000 {
- compatible = "apm,xgene-pmu-v2";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- regmap-csw = <&csw>;
- regmap-mcba = <&mcba>;
- regmap-mcbb = <&mcbb>;
- reg = <0x0 0x78810000 0x0 0x1000>;
- interrupts = <0x0 0x22 0x4>;
-
- pmul3c@7e610000 {
- compatible = "apm,xgene-pmu-l3c";
- reg = <0x0 0x7e610000 0x0 0x1000>;
- };
-
- pmuiob@7e940000 {
- compatible = "apm,xgene-pmu-iob";
- reg = <0x0 0x7e940000 0x0 0x1000>;
- };
-
- pmucmcb@7e710000 {
- compatible = "apm,xgene-pmu-mcb";
- reg = <0x0 0x7e710000 0x0 0x1000>;
- enable-bit-index = <0>;
- };
-
- pmucmcb@7e730000 {
- compatible = "apm,xgene-pmu-mcb";
- reg = <0x0 0x7e730000 0x0 0x1000>;
- enable-bit-index = <1>;
- };
-
- pmucmc@7e810000 {
- compatible = "apm,xgene-pmu-mc";
- reg = <0x0 0x7e810000 0x0 0x1000>;
- enable-bit-index = <0>;
- };
-
- pmucmc@7e850000 {
- compatible = "apm,xgene-pmu-mc";
- reg = <0x0 0x7e850000 0x0 0x1000>;
- enable-bit-index = <1>;
- };
-
- pmucmc@7e890000 {
- compatible = "apm,xgene-pmu-mc";
- reg = <0x0 0x7e890000 0x0 0x1000>;
- enable-bit-index = <2>;
- };
-
- pmucmc@7e8d0000 {
- compatible = "apm,xgene-pmu-mc";
- reg = <0x0 0x7e8d0000 0x0 0x1000>;
- enable-bit-index = <3>;
- };
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index b9680b8..aa71398c 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -43,6 +43,8 @@
the amount of cells must be specified as 2. See the below mentioned gpio
binding representation for description of particular cells.
+ gpio-line-names: true
+
mediatek,pctl-regmap:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index 9acca85..6b925c5 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -19,10 +19,11 @@
- mediatek,mt7629-pinctrl
reg:
- maxItems: 1
+ maxItems: 2
reg-names:
items:
+ - const: base
- const: eint
gpio-controller: true
@@ -204,7 +205,7 @@
pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
- pwm_ch7_0, pwm_0, pwm_1]
+ pwm_ch7_0, pwm_ch7_2, pwm_0, pwm_1]
- if:
properties:
function:
@@ -367,7 +368,8 @@
pio: pinctrl@10211000 {
compatible = "mediatek,mt7622-pinctrl";
- reg = <0 0x10211000 0 0x1000>;
+ reg = <0 0x10211000 0 0x1000>,
+ <0 0x10005000 0 0x1000>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
deleted file mode 100644
index dc57446..0000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
+++ /dev/null
@@ -1,231 +0,0 @@
-=====================================================================
-Freescale MPIC Interrupt Controller Node
-Copyright (C) 2010,2011 Freescale Semiconductor Inc.
-=====================================================================
-
-The Freescale MPIC interrupt controller is found on all PowerQUICC
-and QorIQ processors and is compatible with the Open PIC. The
-notable difference from Open PIC binding is the addition of 2
-additional cells in the interrupt specifier defining interrupt type
-information.
-
-PROPERTIES
-
- - compatible
- Usage: required
- Value type: <string>
- Definition: Shall include "fsl,mpic". Freescale MPIC
- controllers compatible with this binding have Block
- Revision Registers BRR1 and BRR2 at offset 0x0 and
- 0x10 in the MPIC.
-
- - reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical
- offset and length of the device's registers within the
- CCSR address space.
-
- - interrupt-controller
- Usage: required
- Value type: <empty>
- Definition: Specifies that this node is an interrupt
- controller
-
- - #interrupt-cells
- Usage: required
- Value type: <u32>
- Definition: Shall be 2 or 4. A value of 2 means that interrupt
- specifiers do not contain the interrupt-type or type-specific
- information cells.
-
- - #address-cells
- Usage: required
- Value type: <u32>
- Definition: Shall be 0.
-
- - pic-no-reset
- Usage: optional
- Value type: <empty>
- Definition: The presence of this property specifies that the
- MPIC must not be reset by the client program, and that
- the boot program has initialized all interrupt source
- configuration registers to a sane state-- masked or
- directed at other cores. This ensures that the client
- program will not receive interrupts for sources not belonging
- to the client. The presence of this property also mandates
- that any initialization related to interrupt sources shall
- be limited to sources explicitly referenced in the device tree.
-
- - big-endian
- Usage: optional
- Value type: <empty>
- If present the MPIC will be assumed to be big-endian. Some
- device-trees omit this property on MPIC nodes even when the MPIC is
- in fact big-endian, so certain boards override this property.
-
- - single-cpu-affinity
- Usage: optional
- Value type: <empty>
- If present the MPIC will be assumed to only be able to route
- non-IPI interrupts to a single CPU at a time (EG: Freescale MPIC).
-
- - last-interrupt-source
- Usage: optional
- Value type: <u32>
- Some MPICs do not correctly report the number of hardware sources
- in the global feature registers. If specified, this field will
- override the value read from MPIC_GREG_FEATURE_LAST_SRC.
-
-INTERRUPT SPECIFIER DEFINITION
-
- Interrupt specifiers consists of 4 cells encoded as
- follows:
-
- <1st-cell> interrupt-number
-
- Identifies the interrupt source. The meaning
- depends on the type of interrupt.
-
- Note: If the interrupt-type cell is undefined
- (i.e. #interrupt-cells = 2), this cell
- should be interpreted the same as for
- interrupt-type 0-- i.e. an external or
- normal SoC device interrupt.
-
- <2nd-cell> level-sense information, encoded as follows:
- 0 = low-to-high edge triggered
- 1 = active low level-sensitive
- 2 = active high level-sensitive
- 3 = high-to-low edge triggered
-
- <3rd-cell> interrupt-type
-
- The following types are supported:
-
- 0 = external or normal SoC device interrupt
-
- The interrupt-number cell contains
- the SoC device interrupt number. The
- type-specific cell is undefined. The
- interrupt-number is derived from the
- MPIC a block of registers referred to as
- the "Interrupt Source Configuration Registers".
- Each source has 32-bytes of registers
- (vector/priority and destination) in this
- region. So interrupt 0 is at offset 0x0,
- interrupt 1 is at offset 0x20, and so on.
-
- 1 = error interrupt
-
- The interrupt-number cell contains
- the SoC device interrupt number for
- the error interrupt. The type-specific
- cell identifies the specific error
- interrupt number.
-
- 2 = MPIC inter-processor interrupt (IPI)
-
- The interrupt-number cell identifies
- the MPIC IPI number. The type-specific
- cell is undefined.
-
- 3 = MPIC timer interrupt
-
- The interrupt-number cell identifies
- the MPIC timer number. The type-specific
- cell is undefined.
-
- <4th-cell> type-specific information
-
- The type-specific cell is encoded as follows:
-
- - For interrupt-type 1 (error interrupt),
- the type-specific cell contains the
- bit number of the error interrupt in the
- Error Interrupt Summary Register.
-
-EXAMPLE 1
- /*
- * mpic interrupt controller with 4 cells per specifier
- */
- mpic: pic@40000 {
- compatible = "fsl,mpic";
- interrupt-controller;
- #interrupt-cells = <4>;
- #address-cells = <0>;
- reg = <0x40000 0x40000>;
- };
-
-EXAMPLE 2
- /*
- * The MPC8544 I2C controller node has an internal
- * interrupt number of 27. As per the reference manual
- * this corresponds to interrupt source configuration
- * registers at 0x5_0560.
- *
- * The interrupt source configuration registers begin
- * at 0x5_0000.
- *
- * To compute the interrupt specifier interrupt number
- *
- * 0x560 >> 5 = 43
- *
- * The interrupt source configuration registers begin
- * at 0x5_0000, and so the i2c vector/priority registers
- * are at 0x5_0560.
- */
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
-
-EXAMPLE 3
- /*
- * Definition of a node defining the 4
- * MPIC IPI interrupts. Note the interrupt
- * type of 2.
- */
- ipi@410a0 {
- compatible = "fsl,mpic-ipi";
- reg = <0x40040 0x10>;
- interrupts = <0 0 2 0
- 1 0 2 0
- 2 0 2 0
- 3 0 2 0>;
- };
-
-EXAMPLE 4
- /*
- * Definition of a node defining the MPIC
- * global timers. Note the interrupt
- * type of 3.
- */
- timer0: timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
-EXAMPLE 5
- /*
- * Definition of an error interrupt (interrupt type 1).
- * SoC interrupt number is 16 and the specific error
- * interrupt bit in the error interrupt summary register
- * is 23.
- */
- memory-controller@8000 {
- compatible = "fsl,p4080-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
index 79e5198..c654acf 100644
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -15,6 +15,10 @@
buck-<name> and ldo-<name>.
MT6331 regulators node should be sub node of the MT6397 MFD node.
+properties:
+ compatible:
+ const: mediatek,mt6331-regulator
+
patternProperties:
"^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
type: object
@@ -26,23 +30,23 @@
unevaluatedProperties: false
- "^ldo-v(avdd32aud|auxa32)$":
+ "^ldo-(avdd32aud|vauxa32)$":
type: object
$ref: regulator.yaml#
properties:
regulator-name:
- pattern: "^v(avdd32aud|auxa32)$"
+ pattern: "^(avdd32_aud|vauxa32)$"
unevaluatedProperties: false
- "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
+ "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sim1|sim2|sram|usb10)$":
type: object
$ref: regulator.yaml#
properties:
regulator-name:
- pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$"
+ pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sim1|sim2|sram|usb)$"
unevaluatedProperties: false
@@ -52,7 +56,7 @@
properties:
regulator-name:
- pattern: "^vcam(a|af|d|io)$"
+ pattern: "^vcam(a|_af|d|io)$"
unevaluatedProperties: false
@@ -75,13 +79,16 @@
properties:
regulator-name:
- pattern: "^vgp[12]$"
+ pattern: "^vgp[1234]$"
required:
- regulator-name
unevaluatedProperties: false
+required:
+ - compatible
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
index 2eb512c..475f18d 100644
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
@@ -15,6 +15,10 @@
buck-<name> and ldo-<name>.
MT6332 regulators node should be sub node of the MT6397 MFD node.
+properties:
+ compatible:
+ const: mediatek,mt6332-regulator
+
patternProperties:
"^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
type: object
@@ -36,6 +40,9 @@
unevaluatedProperties: false
+required:
+ - compatible
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 1a0cf07..153d0da 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -52,6 +52,7 @@
- sifive,e5
- sifive,e7
- sifive,e71
+ - sifive,p550
- sifive,rocket0
- sifive,s7
- sifive,u5
diff --git a/Documentation/devicetree/bindings/riscv/eswin.yaml b/Documentation/devicetree/bindings/riscv/eswin.yaml
new file mode 100644
index 0000000..c603c45
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/eswin.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/eswin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ESWIN SoC-based boards
+
+maintainers:
+ - Min Lin <linmin@eswincomputing.com>
+ - Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
+ - Pritesh Patel <pritesh.patel@einfochips.com>
+
+description:
+ ESWIN SoC-based boards
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - sifive,hifive-premier-p550
+ - const: eswin,eic7700
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml
index de41a6f..543ac94 100644
--- a/Documentation/devicetree/bindings/riscv/extensions.yaml
+++ b/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -669,6 +669,24 @@
https://mips.com/wp-content/uploads/2025/06/P8700_Programmers_Reference_Manual_Rev1.84_5-31-2025.pdf
# SiFive
+ - const: xsfcease
+ description:
+ SiFive CEASE Instruction Extensions Specification.
+ See more details in
+ https://www.sifive.com/document-file/freedom-u740-c000-manual
+
+ - const: xsfcflushdlone
+ description:
+ SiFive L1D Cache Flush Instruction Extensions Specification.
+ See more details in
+ https://www.sifive.com/document-file/freedom-u740-c000-manual
+
+ - const: xsfpgflushdlone
+ description:
+ SiFive PGFLUSH Instruction Extensions for the power management. The
+ CPU will flush the L1D and enter the cease state after executing
+ the instruction.
+
- const: xsfvqmaccdod
description:
SiFive Int8 Matrix Multiplication Extensions Specification.
diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml
index 78ce76a..381d6eb 100644
--- a/Documentation/devicetree/bindings/riscv/microchip.yaml
+++ b/Documentation/devicetree/bindings/riscv/microchip.yaml
@@ -19,13 +19,26 @@
compatible:
oneOf:
- items:
+ - const: microchip,mpfs-icicle-prod-reference-rtl-v2507
+ - const: microchip,mpfs-icicle-kit-prod
+ - const: microchip,mpfs-icicle-kit
+ - const: microchip,mpfs-prod
+ - const: microchip,mpfs
+
+ - items:
- enum:
- microchip,mpfs-icicle-reference-rtlv2203
- microchip,mpfs-icicle-reference-rtlv2210
+ - microchip,mpfs-icicle-es-reference-rtl-v2507
- const: microchip,mpfs-icicle-kit
- const: microchip,mpfs
- items:
+ - const: microchip,mpfs-disco-kit-reference-rtl-v2507
+ - const: microchip,mpfs-disco-kit
+ - const: microchip,mpfs
+
+ - items:
- enum:
- aldec,tysom-m-mpfs250t-rev2
- aries,m100pfsevp
diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml
index 077b94f..c56b62a 100644
--- a/Documentation/devicetree/bindings/riscv/spacemit.yaml
+++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml
@@ -22,6 +22,7 @@
- enum:
- bananapi,bpi-f3
- milkv,jupiter
+ - xunlong,orangepi-rv2
- const: spacemit,k1
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml
index 7ef8517..04510341 100644
--- a/Documentation/devicetree/bindings/riscv/starfive.yaml
+++ b/Documentation/devicetree/bindings/riscv/starfive.yaml
@@ -28,6 +28,8 @@
- enum:
- deepcomputing,fml13v01
- milkv,mars
+ - milkv,marscm-emmc
+ - milkv,marscm-lite
- pine64,star64
- starfive,visionfive-2-v1.2a
- starfive,visionfive-2-v1.3b
diff --git a/Documentation/devicetree/bindings/rng/SUNW,n2-rng.yaml b/Documentation/devicetree/bindings/rng/SUNW,n2-rng.yaml
new file mode 100644
index 0000000..6eafc53
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/SUNW,n2-rng.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/SUNW,n2-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SUN UltraSPARC HWRNG
+
+maintainers:
+ - David S. Miller <davem@davemloft.net>
+
+properties:
+ compatible:
+ enum:
+ - SUNW,n2-rng # for Niagara 2 Platform (SUN UltraSPARC T2 CPU)
+ - SUNW,vf-rng # for Victoria Falls Platform (SUN UltraSPARC T2 Plus CPU)
+ # for Rainbow/Yosemite Falls Platform (SUN SPARC T3/T4),
+ # (UltraSPARC KT/Niagara 3 - development names)
+ # more recent systems (after Oracle acquisition of SUN)
+ - SUNW,kt-rng
+ - ORCL,m4-rng # for SPARC T5/M5
+ - ORCL,m7-rng # for SPARC T7/M7
+
+ reg:
+ maxItems: 1
+
+ "rng-#units":
+ description: Number of RNG units
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+# PS: see as well prtconfs.git by DaveM
+examples:
+ - |
+ bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rng@e {
+ compatible = "ORCL,m4-rng";
+ reg = <0xe>;
+ rng-#units = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/rng/sparc_sun_oracle_rng.txt b/Documentation/devicetree/bindings/rng/sparc_sun_oracle_rng.txt
deleted file mode 100644
index b0b2111..0000000
--- a/Documentation/devicetree/bindings/rng/sparc_sun_oracle_rng.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-HWRNG support for the n2_rng driver
-
-Required properties:
-- reg : base address to sample from
-- compatible : should contain one of the following
- RNG versions:
- - 'SUNW,n2-rng' for Niagara 2 Platform (SUN UltraSPARC T2 CPU)
- - 'SUNW,vf-rng' for Victoria Falls Platform (SUN UltraSPARC T2 Plus CPU)
- - 'SUNW,kt-rng' for Rainbow/Yosemite Falls Platform (SUN SPARC T3/T4), (UltraSPARC KT/Niagara 3 - development names)
- more recent systems (after Oracle acquisition of SUN)
- - 'ORCL,m4-rng' for SPARC T5/M5
- - 'ORCL,m7-rng' for SPARC T7/M7
-
-Examples:
-/* linux LDOM on SPARC T5-2 */
-Node 0xf029a4f4
- .node: f029a4f4
- rng-#units: 00000002
- compatible: 'ORCL,m4-rng'
- reg: 0000000e
- name: 'random-number-generator'
-
-/* solaris on SPARC M7-8 */
-Node 0xf028c08c
- rng-#units: 00000003
- compatible: 'ORCL,m7-rng'
- reg: 0000000e
- name: 'random-number-generator'
-
-PS: see as well prtconfs.git by DaveM
diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt
deleted file mode 100644
index 55259cf..0000000
--- a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Eckelmann SIOX GPIO bus
-
-Required properties:
-- compatible : "eckelmann,siox-gpio"
-- din-gpios, dout-gpios, dclk-gpios, dld-gpios: references gpios for the
- corresponding bus signals.
-
-Examples:
-
- siox {
- compatible = "eckelmann,siox-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_siox>;
-
- din-gpios = <&gpio6 11 0>;
- dout-gpios = <&gpio6 8 0>;
- dclk-gpios = <&gpio6 9 0>;
- dld-gpios = <&gpio6 10 0>;
- };
diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml
new file mode 100644
index 0000000..2ff2041
--- /dev/null
+++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/siox/eckelmann,siox-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eckelmann SIOX GPIO bus
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: eckelmann,siox-gpio
+
+ din-gpios:
+ maxItems: 1
+
+ dout-gpios:
+ maxItems: 1
+
+ dclk-gpios:
+ maxItems: 1
+
+ dld-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - din-gpios
+ - dout-gpios
+ - dclk-gpios
+ - dld-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ siox {
+ compatible = "eckelmann,siox-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_siox>;
+
+ din-gpios = <&gpio6 11 0>;
+ dout-gpios = <&gpio6 8 0>;
+ dclk-gpios = <&gpio6 9 0>;
+ dld-gpios = <&gpio6 10 0>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,vf610-src.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,vf610-src.yaml
new file mode 100644
index 0000000..6fb93e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,vf610-src.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,vf610-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale vf610 System Reset Controller (SRC)
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ IC reference manual calls it as SRC, but it is not module as reset
+ controller, which used to reset individual device. SRC works as reboot
+ controller, which reboots whole system. It provides a syscon interface to
+ syscon-reboot.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,vf610-src
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ syscon@4006e000 {
+ compatible = "fsl,vf610-src", "syscon";
+ reg = <0x4006e000 0x1000>;
+ interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
index 8451cb4..b77ce8c 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
@@ -38,6 +38,7 @@
- const: simple-mfd
- items:
- enum:
+ - fsl,imx53-iomuxc-gpr
- fsl,imx8mm-iomuxc-gpr
- fsl,imx8mn-iomuxc-gpr
- fsl,imx8mp-iomuxc-gpr
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
index 4737e5f..54c0cd6 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -98,6 +98,9 @@
- const: pwrap
- const: pwrap-bridge
+ power-domains:
+ maxItems: 1
+
pmic:
type: object
@@ -126,6 +129,18 @@
clock-names:
minItems: 4
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8173-pwrap
+ then:
+ properties:
+ power-domains: true
+ else:
+ properties:
+ power-domains: false
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
index 5f9d541..f4947ac 100644
--- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -473,6 +473,12 @@
- const: renesas,r8a779mb
- const: renesas,r8a7795
+ - description: R-Car X5H (R8A78000)
+ items:
+ - enum:
+ - renesas,ironhide # Ironhide (RTP8A78000ASKB0F10S)
+ - const: renesas,r8a78000
+
- description: RZ/N1D (R9A06G032)
items:
- enum:
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 1ab0b09..0164169 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -31,6 +31,7 @@
- rockchip,rk3568-usb2phy-grf
- rockchip,rk3576-bigcore-grf
- rockchip,rk3576-cci-grf
+ - rockchip,rk3576-dcphy-grf
- rockchip,rk3576-gpu-grf
- rockchip,rk3576-hdptxphy-grf
- rockchip,rk3576-litcore-grf
@@ -47,6 +48,7 @@
- rockchip,rk3576-vop-grf
- rockchip,rk3588-bigcore0-grf
- rockchip,rk3588-bigcore1-grf
+ - rockchip,rk3588-csidphy-grf
- rockchip,rk3588-dcphy-grf
- rockchip,rk3588-hdptxphy-grf
- rockchip,rk3588-ioc
@@ -300,6 +302,7 @@
compatible:
contains:
enum:
+ - rockchip,rk3576-dcphy-grf
- rockchip,rk3576-vo1-grf
- rockchip,rk3588-vo-grf
- rockchip,rk3588-vo0-grf
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
index fb5c39c..c9f99e0d 100644
--- a/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
+++ b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml
@@ -116,6 +116,36 @@
- const: xlnx,zynqmp-zcu111
- const: xlnx,zynqmp
+ - description: Xilinx Kria SOMs K24
+ minItems: 3
+ items:
+ enum:
+ - xlnx,zynqmp-sm-k24-rev1
+ - xlnx,zynqmp-sm-k24-revB
+ - xlnx,zynqmp-sm-k24-revA
+ - xlnx,zynqmp-sm-k24
+ - xlnx,zynqmp
+ allOf:
+ - contains:
+ const: xlnx,zynqmp
+ - contains:
+ const: xlnx,zynqmp-sm-k24
+
+ - description: Xilinx Kria SOMs K24 (starter)
+ minItems: 3
+ items:
+ enum:
+ - xlnx,zynqmp-smk-k24-rev1
+ - xlnx,zynqmp-smk-k24-revB
+ - xlnx,zynqmp-smk-k24-revA
+ - xlnx,zynqmp-smk-k24
+ - xlnx,zynqmp
+ allOf:
+ - contains:
+ const: xlnx,zynqmp
+ - contains:
+ const: xlnx,zynqmp-smk-k24
+
- description: Xilinx Kria SOMs
minItems: 3
items:
@@ -148,6 +178,57 @@
- contains:
const: xlnx,zynqmp-smk-k26
+ - description: Xilinx Kria SOM KD240 revA/B/1
+ minItems: 3
+ items:
+ enum:
+ - xlnx,zynqmp-sk-kd240-rev1
+ - xlnx,zynqmp-sk-kd240-revB
+ - xlnx,zynqmp-sk-kd240-revA
+ - xlnx,zynqmp-sk-kd240
+ - xlnx,zynqmp
+ allOf:
+ - contains:
+ const: xlnx,zynqmp-sk-kd240-revA
+ - contains:
+ const: xlnx,zynqmp-sk-kd240
+ - contains:
+ const: xlnx,zynqmp
+
+ - description: Xilinx Kria SOM KR260 revA/Y/Z
+ minItems: 3
+ items:
+ enum:
+ - xlnx,zynqmp-sk-kr260-revA
+ - xlnx,zynqmp-sk-kr260-revY
+ - xlnx,zynqmp-sk-kr260-revZ
+ - xlnx,zynqmp-sk-kr260
+ - xlnx,zynqmp
+ allOf:
+ - contains:
+ const: xlnx,zynqmp-sk-kr260-revA
+ - contains:
+ const: xlnx,zynqmp-sk-kr260
+ - contains:
+ const: xlnx,zynqmp
+
+ - description: Xilinx Kria SOM KR260 rev2/1/B
+ minItems: 3
+ items:
+ enum:
+ - xlnx,zynqmp-sk-kr260-rev2
+ - xlnx,zynqmp-sk-kr260-rev1
+ - xlnx,zynqmp-sk-kr260-revB
+ - xlnx,zynqmp-sk-kr260
+ - xlnx,zynqmp
+ allOf:
+ - contains:
+ const: xlnx,zynqmp-sk-kr260-revB
+ - contains:
+ const: xlnx,zynqmp-sk-kr260
+ - contains:
+ const: xlnx,zynqmp
+
- description: Xilinx Kria SOM KV260 revA/Y/Z
minItems: 3
items:
diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst
index 46d0b03..5f24570 100644
--- a/Documentation/devicetree/bindings/submitting-patches.rst
+++ b/Documentation/devicetree/bindings/submitting-patches.rst
@@ -95,7 +95,7 @@
For subsystem bindings (anything affecting more than a single device),
getting a devicetree maintainer to review it is required.
- 3) For a series going though multiple trees, the binding patch should be
+ 3) For a series going through multiple trees, the binding patch should be
kept with the driver using the binding.
4) The DTS files should however never be applied via driver subsystem tree,
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
deleted file mode 100644
index ab8b8fc..0000000
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Marvell Armada 370/375/380/XP thermal management
-
-Required properties:
-
-- compatible: Should be set to one of the following:
- * marvell,armada370-thermal
- * marvell,armada375-thermal
- * marvell,armada380-thermal
- * marvell,armadaxp-thermal
- * marvell,armada-ap806-thermal
- * marvell,armada-ap807-thermal
- * marvell,armada-cp110-thermal
-
-Note: these bindings are deprecated for AP806/CP110 and should instead
-follow the rules described in:
-Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
-Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
-
-- reg: Device's register space.
- Two entries are expected, see the examples below. The first one points
- to the status register (4B). The second one points to the control
- registers (8B).
- Note: The compatibles marvell,armada370-thermal,
- marvell,armada380-thermal, and marvell,armadaxp-thermal must point to
- "control MSB/control 1", with size of 4 (deprecated binding), or point
- to "control LSB/control 0" with size of 8 (current binding). All other
- compatibles must point to "control LSB/control 0" with size of 8.
-
-Examples:
-
- /* Legacy bindings */
- thermal@d0018300 {
- compatible = "marvell,armada370-thermal";
- reg = <0xd0018300 0x4
- 0xd0018304 0x4>;
- };
-
- ap_thermal: thermal@6f8084 {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808C 0x4>,
- <0x6f8084 0x8>;
- };
diff --git a/Documentation/devicetree/bindings/thermal/marvell,armada-ap806-thermal.yaml b/Documentation/devicetree/bindings/thermal/marvell,armada-ap806-thermal.yaml
new file mode 100644
index 0000000..2c37031
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/marvell,armada-ap806-thermal.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/marvell,armada-ap806-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada AP80x/CP110 thermal management
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-ap806-thermal
+ - marvell,armada-ap807-thermal
+ - marvell,armada-cp110-thermal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Overheat interrupt. The interrupt is connected thru a System Error
+ Interrupt (SEI) controller.
+ maxItems: 1
+
+ '#thermal-sensor-cells':
+ description: Cell represents the channel ID. There is one sensor per
+ channel. O refers to the thermal IP internal channel.
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ interrupts = <18>;
+ #thermal-sensor-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/marvell,armada370-thermal.yaml b/Documentation/devicetree/bindings/thermal/marvell,armada370-thermal.yaml
new file mode 100644
index 0000000..33779285
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/marvell,armada370-thermal.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/marvell,armada370-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3xx/XP thermal management
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada370-thermal
+ - marvell,armada375-thermal
+ - marvell,armada380-thermal
+ - marvell,armadaxp-thermal
+
+ reg:
+ items:
+ - description: status register (4B)
+ - description: control register (8B)
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ thermal@d0018300 {
+ compatible = "marvell,armada370-thermal";
+ reg = <0xd0018300 0x4>,
+ <0xd0018304 0x8>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
index cf47a1f..25efedc 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
@@ -18,6 +18,7 @@
properties:
compatible:
enum:
+ - nvidia,tegra114-soctherm
- nvidia,tegra124-soctherm
- nvidia,tegra132-soctherm
- nvidia,tegra210-soctherm
@@ -206,6 +207,7 @@
compatible:
contains:
enum:
+ - nvidia,tegra114-soctherm
- nvidia,tegra124-soctherm
- nvidia,tegra210-soctherm
- nvidia,tegra210b01-soctherm
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 94311eb..78e2f65 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -49,11 +49,13 @@
- description: v2 of TSENS
items:
- enum:
+ - qcom,glymur-tsens
- qcom,milos-tsens
- qcom,msm8953-tsens
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,qcm2290-tsens
+ - qcom,qcs615-tsens
- qcom,sa8255p-tsens
- qcom,sa8775p-tsens
- qcom,sar2130p-tsens
diff --git a/Documentation/devicetree/bindings/thermal/renesas,r9a08g045-tsu.yaml b/Documentation/devicetree/bindings/thermal/renesas,r9a08g045-tsu.yaml
new file mode 100644
index 0000000..573e2b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/renesas,r9a08g045-tsu.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/renesas,r9a08g045-tsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G3S Thermal Sensor Unit
+
+description:
+ The thermal sensor unit (TSU) measures the temperature(Tj) inside
+ the LSI.
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+
+$ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ const: renesas,r9a08g045-tsu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: TSU module clock
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: TSU module reset
+
+ io-channels:
+ items:
+ - description: ADC channel which reports the TSU temperature
+
+ io-channel-names:
+ items:
+ - const: tsu
+
+ "#thermal-sensor-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - resets
+ - io-channels
+ - io-channel-names
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a08g045-cpg.h>
+
+ tsu: thermal@10059000 {
+ compatible = "renesas,r9a08g045-tsu";
+ reg = <0x10059000 0x1000>;
+ clocks = <&cpg CPG_MOD R9A08G045_TSU_PCLK>;
+ resets = <&cpg R9A08G045_TSU_PRESETN>;
+ power-domains = <&cpg>;
+ #thermal-sensor-cells = <0>;
+ io-channels = <&adc 8>;
+ io-channel-names = "tsu";
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsu>;
+
+ trips {
+ sensor_crit: sensor-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ target: trip-point {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
new file mode 100644
index 0000000..8d3f3c24
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/renesas,r9a09g047-tsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G3E Temperature Sensor Unit (TSU)
+
+maintainers:
+ - John Madieu <john.madieu.xa@bp.renesas.com>
+
+description:
+ The Temperature Sensor Unit (TSU) is an integrated thermal sensor that
+ monitors the chip temperature on the Renesas RZ/G3E SoC. The TSU provides
+ real-time temperature measurements for thermal management.
+
+properties:
+ compatible:
+ const: renesas,r9a09g047-tsu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Conversion complete interrupt signal (pulse)
+ - description: Comparison result interrupt signal (level)
+
+ interrupt-names:
+ items:
+ - const: adi
+ - const: adcmpi
+
+ "#thermal-sensor-cells":
+ const: 0
+
+ renesas,tsu-trim:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to system controller
+ - description: offset of trim registers
+ description:
+ Phandle and offset to the system controller containing the TSU
+ calibration trim values. The offset points to the first trim register
+ (OTPTSU1TRMVAL0), with the second trim register (OTPTSU1TRMVAL1) located
+ at offset + 4.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - power-domains
+ - interrupts
+ - interrupt-names
+ - "#thermal-sensor-cells"
+ - renesas,tsu-trim
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/renesas,r9a09g047-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ thermal-sensor@14002000 {
+ compatible = "renesas,r9a09g047-tsu";
+ reg = <0x14002000 0x1000>;
+ clocks = <&cpg CPG_MOD 0x10a>;
+ resets = <&cpg 0xf8>;
+ power-domains = <&cpg>;
+ interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "adi", "adcmpi";
+ #thermal-sensor-cells = <0>;
+ renesas,tsu-trim = <&sys 0x330>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
index 573f447..9fa5c4c4 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
@@ -120,6 +120,21 @@
allOf:
- if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-tsadc
+ - rockchip,rk3366-tsadc
+ - rockchip,rk3399-tsadc
+ - rockchip,rk3568-tsadc
+ then:
+ required:
+ - rockchip,grf
+ else:
+ properties:
+ rockchip,grf: false
+ - if:
not:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/timer/mediatek,timer.yaml b/Documentation/devicetree/bindings/timer/mediatek,timer.yaml
index e3e38066..337580d 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,timer.yaml
+++ b/Documentation/devicetree/bindings/timer/mediatek,timer.yaml
@@ -30,6 +30,7 @@
- mediatek,mt6580-timer
- mediatek,mt6582-timer
- mediatek,mt6589-timer
+ - mediatek,mt6795-timer
- mediatek,mt7623-timer
- mediatek,mt8127-timer
- mediatek,mt8135-timer
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 12cb7f6..174a677 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -410,6 +410,8 @@
- sparkfun,qwiic-joystick
# Sierra Wireless mangOH Green SPI IoT interface
- swir,mangoh-iotport-spi
+ # Synaptics I2C touchpad
+ - synaptics,synaptics_i2c
# Ambient Light Sensor with SMBUS/Two Wire Serial Interface
- taos,tsl2550
# Digital PWM System Controller PMBus
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9ec8947..1e85e42 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -48,6 +48,8 @@
description: Acme Systems srl
"^actions,.*":
description: Actions Semiconductor Co., Ltd.
+ "^actiontec,.*":
+ description: Actiontec Electronics, Inc
"^active-semi,.*":
description: Active-Semi International Inc
"^ad,.*":
@@ -86,6 +88,8 @@
description: Allegro DVT
"^allegromicro,.*":
description: Allegro MicroSystems, Inc.
+ "^alliedtelesis,.*":
+ description: Allied Telesis, Inc.
"^alliedvision,.*":
description: Allied Vision Technologies GmbH
"^allo,.*":
@@ -229,6 +233,8 @@
description: Bitmain Technologies
"^blaize,.*":
description: Blaize, Inc.
+ "^bluegiga,.*":
+ description: Bluegiga Technologies Ltd.
"^blutek,.*":
description: BluTek Power
"^boe,.*":
@@ -247,6 +253,8 @@
description: Bticino International
"^buffalo,.*":
description: Buffalo, Inc.
+ "^buglabs,.*":
+ description: Bug Labs, Inc.
"^bur,.*":
description: B&R Industrial Automation GmbH
"^bytedance,.*":
@@ -325,6 +333,8 @@
description: Conexant Systems, Inc.
"^colorfly,.*":
description: Colorful GRP, Shenzhen Xueyushi Technology Ltd.
+ "^compal,.*":
+ description: Compal Electronics, Inc.
"^compulab,.*":
description: CompuLab Ltd.
"^comvetia,.*":
@@ -353,6 +363,8 @@
description: Guangzhou China Star Optoelectronics Technology Co., Ltd
"^csq,.*":
description: Shenzen Chuangsiqi Technology Co.,Ltd.
+ "^csr,.*":
+ description: Cambridge Silicon Radio
"^ctera,.*":
description: CTERA Networks Intl.
"^ctu,.*":
@@ -455,6 +467,8 @@
description: Emtop Embedded Solutions
"^eeti,.*":
description: eGalax_eMPIA Technology Inc
+ "^egnite,.*":
+ description: egnite GmbH
"^einfochips,.*":
description: Einfochips
"^eink,.*":
@@ -485,8 +499,12 @@
description: Empire Electronix
"^emtrion,.*":
description: emtrion GmbH
+ "^enbw,.*":
+ description: Energie Baden-Württemberg AG
"^enclustra,.*":
description: Enclustra GmbH
+ "^endian,.*":
+ description: Endian SRL
"^endless,.*":
description: Endless Mobile, Inc.
"^ene,.*":
@@ -550,10 +568,14 @@
description: Foxconn Industrial Internet
"^firefly,.*":
description: Firefly
+ "^flipkart,.*":
+ description: Flipkart Inc.
"^focaltech,.*":
description: FocalTech Systems Co.,Ltd
"^forlinx,.*":
description: Baoding Forlinx Embedded Technology Co., Ltd.
+ "^foxlink,.*":
+ description: Foxlink Group
"^freebox,.*":
description: Freebox SAS
"^freecom,.*":
@@ -642,12 +664,18 @@
description: Haoyu Microelectronic Co. Ltd.
"^hardkernel,.*":
description: Hardkernel Co., Ltd
+ "^hce,.*":
+ description: HCE Engineering SRL
+ "^headacoustics,.*":
+ description: HEAD acoustics
"^hechuang,.*":
description: Shenzhen Hechuang Intelligent Co.
"^hideep,.*":
description: HiDeep Inc.
"^himax,.*":
description: Himax Technologies, Inc.
+ "^hinlink,.*":
+ description: Shenzhen HINLINK Technology Co., Ltd.
"^hirschmann,.*":
description: Hirschmann Automation and Control GmbH
"^hisi,.*":
@@ -725,6 +753,8 @@
description: Shenzhen INANBO Electronic Technology Co., Ltd.
"^incircuit,.*":
description: In-Circuit GmbH
+ "^incostartec,.*":
+ description: INCOstartec GmbH
"^indiedroid,.*":
description: Indiedroid
"^inet-tek,.*":
@@ -933,6 +963,8 @@
description: Maxim Integrated Products
"^maxlinear,.*":
description: MaxLinear Inc.
+ "^maxtor,.*":
+ description: Maxtor Corporation
"^mbvl,.*":
description: Mobiveil Inc.
"^mcube,.*":
@@ -1096,6 +1128,8 @@
description: Nordic Semiconductor
"^nothing,.*":
description: Nothing Technology Limited
+ "^novatech,.*":
+ description: NovaTech Automation
"^novatek,.*":
description: Novatek
"^novtech,.*":
@@ -1181,6 +1215,8 @@
description: Parade Technologies Inc.
"^parallax,.*":
description: Parallax Inc.
+ "^particle,.*":
+ description: Particle Industries, Inc.
"^pda,.*":
description: Precision Design Associates, Inc.
"^pegatron,.*":
@@ -1191,6 +1227,8 @@
description: Pervasive Displays, Inc.
"^phicomm,.*":
description: PHICOMM Co., Ltd.
+ "^phontech,.*":
+ description: Phontech
"^phytec,.*":
description: PHYTEC Messtechnik GmbH
"^picochip,.*":
@@ -1275,6 +1313,8 @@
description: Ramtron International
"^raspberrypi,.*":
description: Raspberry Pi Foundation
+ "^raumfeld,.*":
+ description: Raumfeld GmbH
"^raydium,.*":
description: Raydium Semiconductor Corp.
"^rda,.*":
@@ -1313,6 +1353,8 @@
description: ROHM Semiconductor Co., Ltd
"^ronbo,.*":
description: Ronbo Electronics
+ "^ronetix,.*":
+ description: Ronetix GmbH
"^roofull,.*":
description: Shenzhen Roofull Technology Co, Ltd
"^roseapplepi,.*":
@@ -1339,8 +1381,12 @@
description: Schindler
"^schneider,.*":
description: Schneider Electric
+ "^schulercontrol,.*":
+ description: Schuler Group
"^sciosense,.*":
description: ScioSense B.V.
+ "^sdmc,.*":
+ description: SDMC Technology Co., Ltd
"^seagate,.*":
description: Seagate Technology PLC
"^seeed,.*":
@@ -1379,6 +1425,8 @@
description: Si-En Technology Ltd.
"^si-linux,.*":
description: Silicon Linux Corporation
+ "^sielaff,.*":
+ description: Sielaff GmbH & Co.
"^siemens,.*":
description: Siemens AG
"^sifive,.*":
@@ -1447,6 +1495,8 @@
description: SolidRun
"^solomon,.*":
description: Solomon Systech Limited
+ "^somfy,.*":
+ description: Somfy Systems Inc.
"^sony,.*":
description: Sony Corporation
"^sophgo,.*":
@@ -1512,11 +1562,16 @@
description: Sierra Wireless
"^syna,.*":
description: Synaptics Inc.
+ "^synaptics,.*":
+ description: Synaptics Inc.
+ deprecated: true
"^synology,.*":
description: Synology, Inc.
"^synopsys,.*":
description: Synopsys, Inc. (deprecated, use snps)
deprecated: true
+ "^taos,.*":
+ description: Texas Advanced Optoelectronic Solutions Inc.
"^tbs,.*":
description: TBS Technologies
"^tbs-biometrics,.*":
@@ -1547,6 +1602,8 @@
description: Teltonika Networks
"^tempo,.*":
description: Tempo Semiconductor
+ "^tenda,.*":
+ description: Shenzhen Tenda Technology Co., Ltd.
"^terasic,.*":
description: Terasic Inc.
"^tesla,.*":
@@ -1650,6 +1707,8 @@
description: V3 Semiconductor
"^vaisala,.*":
description: Vaisala
+ "^valve,.*":
+ description: Valve Corporation
"^vamrs,.*":
description: Vamrs Ltd.
"^variscite,.*":
@@ -1750,6 +1809,8 @@
description: Extreme Engineering Solutions (X-ES)
"^xiaomi,.*":
description: Xiaomi Technology Co., Ltd.
+ "^xicor,.*":
+ description: Xicor Inc.
"^xillybus,.*":
description: Xillybus Ltd.
"^xingbangda,.*":
@@ -1811,7 +1872,7 @@
# Normal property name match without a comma
# These should catch all node/property names without a prefix
- "^[a-zA-Z0-9#_][a-zA-Z0-9+\\-._@]{0,63}$": true
+ "^[a-zA-Z0-9#_][a-zA-Z0-9#+\\-._@]{0,63}$": true
"^[a-zA-Z0-9+\\-._]*@[0-9a-zA-Z,]*$": true
"^#.*": true
diff --git a/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
deleted file mode 100644
index a8d00c3..0000000
--- a/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Armada 37xx CPU Watchdog Timer Controller
-
-Required properties:
-- compatible : must be "marvell,armada-3700-wdt"
-- reg : base physical address of the controller and length of memory mapped
- region.
-- clocks : the clock feeding the watchdog timer. See clock-bindings.txt
-- marvell,system-controller : reference to syscon node for the CPU Miscellaneous
- Registers
-
-Example:
-
- cpu_misc: system-controller@d000 {
- compatible = "marvell,armada-3700-cpu-misc", "syscon";
- reg = <0xd000 0x1000>;
- };
-
- wdt: watchdog@8300 {
- compatible = "marvell,armada-3700-wdt";
- reg = <0x8300 0x40>;
- marvell,system-controller = <&cpu_misc>;
- clocks = <&xtalclk>;
- };
diff --git a/Documentation/devicetree/bindings/watchdog/marvell,armada-3700-wdt.yaml b/Documentation/devicetree/bindings/watchdog/marvell,armada-3700-wdt.yaml
new file mode 100644
index 0000000..60d44d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvell,armada-3700-wdt.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/marvell,armada-3700-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Armada 37xx CPU Watchdog Timer Controller
+
+maintainers:
+ - Marek Behún <kabel@kernel.org>
+
+properties:
+ compatible:
+ const: marvell,armada-3700-wdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ marvell,system-controller:
+ description: Reference to syscon node for the CPU Miscellaneous Registers
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - marvell,system-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ watchdog@8300 {
+ compatible = "marvell,armada-3700-wdt";
+ reg = <0x8300 0x40>;
+ marvell,system-controller = <&cpu_misc>;
+ clocks = <&xtalclk>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
deleted file mode 100644
index 1169857..0000000
--- a/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-MOXA ART Watchdog timer
-
-Required properties:
-
-- compatible : Must be "moxa,moxart-watchdog"
-- reg : Should contain registers location and length
-- clocks : Should contain phandle for the clock that drives the counter
-
-Example:
-
- watchdog: watchdog@98500000 {
- compatible = "moxa,moxart-watchdog";
- reg = <0x98500000 0x10>;
- clocks = <&coreclk>;
- };
diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
deleted file mode 100644
index 866a958..0000000
--- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Nuvoton NPCM Watchdog
-
-Nuvoton NPCM timer module provides five 24-bit timer counters, and a watchdog.
-The watchdog supports a pre-timeout interrupt that fires 10ms before the
-expiry.
-
-Required properties:
-- compatible : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or
- "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or
- "nuvoton,npcm845-wdt" for NPCM845 (Arbel).
-- reg : Offset and length of the register set for the device.
-- interrupts : Contain the timer interrupt with flags for
- falling edge.
-
-Required clocking property, have to be one of:
-- clocks : phandle of timer reference clock.
-- clock-frequency : The frequency in Hz of the clock that drives the NPCM7xx
- timer (usually 25000000).
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds
-
-Example:
-
-timer@f000801c {
- compatible = "nuvoton,npcm750-wdt";
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf000801c 0x4>;
- clocks = <&clk NPCM7XX_CLK_TIMER>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm750-wdt.yaml b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm750-wdt.yaml
new file mode 100644
index 0000000..7aa30f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm750-wdt.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/nuvoton,npcm750-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Watchdog
+
+maintainers:
+ - Joel Stanley <joel@jms.id.au>
+
+description:
+ Nuvoton NPCM timer module provides five 24-bit timer counters, and a watchdog.
+ The watchdog supports a pre-timeout interrupt that fires 10ms before the
+ expiry.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nuvoton,npcm750-wdt
+ - nuvoton,wpcm450-wdt
+ - items:
+ - enum:
+ - nuvoton,npcm845-wdt
+ - const: nuvoton,npcm750-wdt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ description: Frequency in Hz of the clock that drives the NPCM timer.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+
+ watchdog@f000801c {
+ compatible = "nuvoton,npcm750-wdt";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf000801c 0x4>;
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+ };
diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst
index f8e0293..667816d 100644
--- a/Documentation/devicetree/bindings/writing-bindings.rst
+++ b/Documentation/devicetree/bindings/writing-bindings.rst
@@ -31,10 +31,19 @@
devices only need child nodes when the child nodes have their own DT
resources. A single node can be multiple providers (e.g. clocks and resets).
+- DON'T treat device node names as a stable ABI, but instead use phandles or
+ compatibles to find sibling devices. Exception: sub-nodes of given device
+ could be treated as ABI, if explicitly documented in the bindings.
+
- DON'T use 'syscon' alone without a specific compatible string. A 'syscon'
hardware block should have a compatible string unique enough to infer the
register layout of the entire block (at a minimum).
+- DON'T use 'simple-mfd' compatible for non-trivial devices, where children
+ depend on some resources from the parent. Similarly, 'simple-bus' should not
+ be used for complex buses and even 'regs' property means device is not
+ a simple bus.
+
Properties
==========
diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst
index 470d1521..05c3424 100644
--- a/Documentation/devicetree/bindings/writing-schema.rst
+++ b/Documentation/devicetree/bindings/writing-schema.rst
@@ -53,7 +53,7 @@
The default without any indicators is flowed, plain scalar style where single
line breaks and leading whitespace are stripped. Paragraphs are delimited by
blank lines (i.e. double line break). This style cannot contain ": " in it as
- it will be interpretted as a key. Any " #" sequence will be interpretted as
+ it will be interpreted as a key. Any " #" sequence will be interpreted as
a comment. There's other restrictions on characters as well. Most
restrictions are on what the first character can be.
@@ -165,6 +165,14 @@
values a matrix (in order to define groupings) even when only a single value
is present. Single entries in schemas are fixed up to match this encoding.
+When bindings cover multiple similar devices that differ in some properties,
+those properties should be constrained for each device. This usually means:
+
+ * In top level 'properties' define the property with the broadest constraints.
+ * In 'if:then:' blocks, further narrow the constraints for those properties.
+ * Do not define the properties within an 'if:then:' block (note that
+ 'additionalItems' also won't allow that).
+
Coding style
------------
diff --git a/Documentation/devicetree/of_unittest.rst b/Documentation/devicetree/of_unittest.rst
index a6c0596..8b557ac 100644
--- a/Documentation/devicetree/of_unittest.rst
+++ b/Documentation/devicetree/of_unittest.rst
@@ -56,7 +56,7 @@
for the Device Tree Source Include files (.dtsi) included in testcases.dts.
-When the kernel is build with CONFIG_OF_UNITTEST enabled, then the following make
+When the kernel is built with CONFIG_OF_UNITTEST enabled, then the following make
rule::
$(obj)/%.dtb: $(src)/%.dts FORCE
@@ -133,7 +133,7 @@
__dtb_testcases_end - address marking the end of test data blob
Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened
-blob. And finally, if the machine's device tree (i.e live tree) is present,
+blob. And finally, if the machine's device tree (i.e. live tree) is present,
then it attaches the unflattened test data tree to the live tree, else it
attaches itself as a live device tree.
diff --git a/Documentation/devicetree/overlay-notes.rst b/Documentation/devicetree/overlay-notes.rst
index 35e7924..ba401ef 100644
--- a/Documentation/devicetree/overlay-notes.rst
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -14,11 +14,11 @@
A Devicetree's overlay purpose is to modify the kernel's live tree, and
have the modification affecting the state of the kernel in a way that
is reflecting the changes.
-Since the kernel mainly deals with devices, any new device node that result
+Since the kernel mainly deals with devices, any new device node that results
in an active device should have it created while if the device node is either
disabled or removed all together, the affected device should be deregistered.
-Lets take an example where we have a foo board with the following base tree::
+Let's take an example where we have a foo board with the following base tree::
---- foo.dts ---------------------------------------------------------------
/* FOO platform */
@@ -111,7 +111,7 @@
1) Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
return value is an error or a cookie identifying this overlay.
-2) Call of_overlay_remove() to remove and cleanup the overlay changeset
+2) Call of_overlay_remove() to remove and clean up the overlay changeset
previously created via the call to of_overlay_fdt_apply(). Removal of an
overlay changeset that is stacked by another will not be permitted.
diff --git a/Documentation/devicetree/usage-model.rst b/Documentation/devicetree/usage-model.rst
index 0717426..c6146c9 100644
--- a/Documentation/devicetree/usage-model.rst
+++ b/Documentation/devicetree/usage-model.rst
@@ -46,7 +46,7 @@
communication method for passing data from Open Firmware to a client
program (like to an operating system). An operating system used the
Device Tree to discover the topology of the hardware at runtime, and
-thereby support a majority of available hardware without hard coded
+thereby supported a majority of available hardware without hard coded
information (assuming drivers were available for all devices).
Since Open Firmware is commonly used on PowerPC and SPARC platforms,
@@ -128,7 +128,7 @@
compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3";
Where "ti,omap3-beagleboard-xm" specifies the exact model, it also
-claims that it compatible with the OMAP 3450 SoC, and the omap3 family
+claims that it is compatible with the OMAP 3450 SoC, and the omap3 family
of SoCs in general. You'll notice that the list is sorted from most
specific (exact board) to least specific (SoC family).
@@ -205,7 +205,7 @@
During early boot, the architecture setup code calls of_scan_flat_dt()
several times with different helper callbacks to parse device tree
-data before paging is setup. The of_scan_flat_dt() code scans through
+data before paging is set up. The of_scan_flat_dt() code scans through
the device tree and uses the helpers to extract information required
during early boot. Typically the early_init_dt_scan_chosen() helper
is used to parse the chosen node including kernel parameters,
diff --git a/Documentation/process/maintainer-soc.rst b/Documentation/process/maintainer-soc.rst
index fe9d8bc..3ba886f 100644
--- a/Documentation/process/maintainer-soc.rst
+++ b/Documentation/process/maintainer-soc.rst
@@ -10,7 +10,7 @@
The SoC subsystem is a place of aggregation for SoC-specific code.
The main components of the subsystem are:
-* devicetrees for 32- & 64-bit ARM and RISC-V
+* devicetrees (DTS) for 32- & 64-bit ARM and RISC-V
* 32-bit ARM board files (arch/arm/mach*)
* 32- & 64-bit ARM defconfigs
* SoC-specific drivers across architectures, in particular for 32- & 64-bit
@@ -97,8 +97,8 @@
document the ABI between the devicetree and the kernel.
Please read Documentation/devicetree/bindings/ABI.rst.
-If changes are being made to a devicetree that are incompatible with old
-kernels, the devicetree patch should not be applied until the driver is, or an
+If changes are being made to a DTS that are incompatible with old
+kernels, the DTS patch should not be applied until the driver is, or an
appropriate time later. Most importantly, any incompatible changes should be
clearly pointed out in the patch description and pull request, along with the
expected impact on existing users, such as bootloaders or other operating
diff --git a/MAINTAINERS b/MAINTAINERS
index 8b0d4ac..24feb8c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1881,7 +1881,7 @@
APPLIED MICRO (APM) X-GENE SOC EDAC
M: Khuong Dinh <khuong@os.amperecomputing.com>
S: Supported
-F: Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
+F: Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
F: drivers/edac/xgene_edac.c
APPLIED MICRO (APM) X-GENE SOC ETHERNET (V2) DRIVER
@@ -1904,7 +1904,7 @@
M: Khuong Dinh <khuong@os.amperecomputing.com>
S: Supported
F: Documentation/admin-guide/perf/xgene-pmu.rst
-F: Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
+F: Documentation/devicetree/bindings/perf/apm,xgene-pmu.yaml
F: drivers/perf/xgene_pmu.c
APPLIED MICRO QT2025 PHY DRIVER
@@ -2632,7 +2632,7 @@
F: Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
F: Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml
F: Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
-F: Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
+F: Documentation/devicetree/bindings/watchdog/marvell,armada-3700-wdt.yaml
F: drivers/bus/moxtet.c
F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
@@ -2840,8 +2840,8 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git
-F: Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
-F: Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
+F: Documentation/devicetree/bindings/arm/marvell/marvell,dove.yaml
+F: Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml
F: Documentation/devicetree/bindings/soc/dove/
F: arch/arm/boot/dts/marvell/dove*
F: arch/arm/boot/dts/marvell/orion5x*
@@ -3120,7 +3120,6 @@
R: cros-qcom-dts-watchers@chromium.org
F: arch/arm64/boot/dts/qcom/sc7180*
F: arch/arm64/boot/dts/qcom/sc7280*
-F: arch/arm64/boot/dts/qcom/sdm845-cheza*
ARM/QUALCOMM MAILING LIST
L: linux-arm-msm@vger.kernel.org
@@ -4118,6 +4117,18 @@
F: Documentation/devicetree/bindings/sound/axentia,*
F: sound/soc/atmel/tse850-pcm5142.c
+AXIS ARTPEC ARM64 SoC SUPPORT
+M: Jesper Nilsson <jesper.nilsson@axis.com>
+M: Lars Persson <lars.persson@axis.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org
+L: linux-arm-kernel@axis.com
+S: Maintained
+F: Documentation/devicetree/bindings/clock/axis,artpec*-clock.yaml
+F: arch/arm64/boot/dts/exynos/axis/
+F: drivers/clk/samsung/clk-artpec*.c
+F: include/dt-bindings/clock/axis,artpec*-clk.h
+
AXI-FAN-CONTROL HARDWARE MONITOR DRIVER
M: Nuno Sá <nuno.sa@analog.com>
L: linux-hwmon@vger.kernel.org
@@ -5556,7 +5567,7 @@
M: Robert Richter <rric@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Odd Fixes
-F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt
+F: Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
F: arch/arm64/boot/dts/cavium/thunder2-99xx*
CBS/ETF/TAPRIO QDISCS
@@ -7579,7 +7590,7 @@
L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
S: Supported
T: git https://gitlab.freedesktop.org/drm/misc/kernel.git
-F: Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
+F: Documentation/devicetree/bindings/gpu/aspeed,ast2400-gfx.yaml
F: drivers/gpu/drm/aspeed/
DRM DRIVER FOR AST SERVER GRAPHICS CHIPS
@@ -8751,7 +8762,7 @@
EDAC-AST2500
M: Stefan Schaeckeler <sschaeck@cisco.com>
S: Supported
-F: Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+F: Documentation/devicetree/bindings/edac/aspeed,ast2400-sdram-edac.yaml
F: drivers/edac/aspeed_edac.c
EDAC-BLUEFIELD
@@ -9123,6 +9134,15 @@
S: Maintained
F: drivers/net/can/usb/esd_usb.c
+ESWIN DEVICETREES
+M: Min Lin <linmin@eswincomputing.com>
+M: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
+M: Pritesh Patel <pritesh.patel@einfochips.com>
+S: Maintained
+T: git https://github.com/eswincomputing/linux-next.git
+F: Documentation/devicetree/bindings/riscv/eswin.yaml
+F: arch/riscv/boot/dts/eswin/
+
ET131X NETWORK DRIVER
M: Mark Einon <mark.einon@gmail.com>
S: Odd Fixes
@@ -10025,6 +10045,7 @@
L: linux-fsi@lists.ozlabs.org
S: Supported
Q: http://patchwork.ozlabs.org/project/linux-fsi/list/
+F: Documentation/devicetree/bindings/fsi/
F: drivers/fsi/
F: include/linux/fsi*.h
F: include/trace/events/fsi*.h
@@ -15657,7 +15678,7 @@
M: Yunfei Dong <yunfei.dong@mediatek.com>
S: Supported
F: Documentation/devicetree/bindings/media/mediatek,vcodec*.yaml
-F: Documentation/devicetree/bindings/media/mediatek-vpu.txt
+F: Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
F: drivers/media/platform/mediatek/vcodec/
F: drivers/media/platform/mediatek/vpu/
@@ -21708,6 +21729,20 @@
F: Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
F: drivers/iio/potentiometer/x9250.c
+RENESAS RZ/G3S THERMAL SENSOR UNIT DRIVER
+M: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/thermal/renesas,r9a08g045-tsu.yaml
+F: drivers/thermal/renesas/rzg3s_thermal.c
+
+RENESAS RZ/G3E THERMAL SENSOR UNIT DRIVER
+M: John Madieu <john.madieu.xa@bp.renesas.com>
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
+F: drivers/thermal/renesas/rzg3e_thermal.c
+
RESET CONTROLLER FRAMEWORK
M: Philipp Zabel <p.zabel@pengutronix.de>
S: Maintained
@@ -21885,6 +21920,7 @@
M: Fu Wei <wefu@redhat.com>
L: linux-riscv@lists.infradead.org
S: Maintained
+Q: https://patchwork.kernel.org/project/riscv-thead/list/
T: git https://github.com/pdp7/linux.git
F: Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
F: Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml
@@ -26001,6 +26037,7 @@
M: Börge Strümpfel <boerge.struempfel@gmail.com>
S: Maintained
F: arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
+F: arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
UNICODE SUBSYSTEM
M: Gabriel Krisman Bertazi <krisman@kernel.org>
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
index d799ad1..f71392a 100644
--- a/arch/arm/boot/dts/allwinner/Makefile
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -182,6 +182,7 @@
sun7i-a20-wits-pro-a20-dkt.dtb
# Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
DTC_FLAGS_sun8i-h3-orangepi-lite := -@
DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
@@ -199,6 +200,7 @@
DTC_FLAGS_sun8i-h3-orangepi-pc := -@
DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-evb.dtb \
@@ -225,6 +227,7 @@
sun8i-h2-plus-libretech-all-h3-cc.dtb \
sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
+ sun8i-h2-plus-orangepi-zero-interface-board.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-bananapi-m2-plus-v1.2.dtb \
sun8i-h3-beelink-x2.dtb \
@@ -244,6 +247,7 @@
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-orangepi-zero-plus2.dtb \
+ sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
sun8i-h3-rervision-dvk.dtb \
sun8i-h3-zeropi.dtb \
sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
@@ -257,6 +261,8 @@
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
sun8i-t113s-mangopi-mq-r-t113.dtb \
+ sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+ sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
sun8i-t3-cqa3t-bv3.dtb \
sun8i-v3-sl631-imx179.dtb \
sun8i-v3s-anbernic-rg-nano.dtb \
@@ -264,6 +270,10 @@
sun8i-v3s-licheepi-zero-dock.dtb \
sun8i-v3s-netcube-kumquat.dtb \
sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+ sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+ sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
index 1b001f2..b23cec5 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -112,6 +112,20 @@ wifi_pwrseq: pwrseq {
};
};
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "disabled";
+};
+
&cpu0 {
cpu-supply = <®_vdd_cpux>;
};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index 7a6444a..97a3565 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -99,6 +99,20 @@ wifi_pwrseq: pwrseq {
};
};
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "disabled";
+};
+
&de {
status = "okay";
};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 0000000..e137eef
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ * https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 0000000..5262102
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+ model = "NetCube Systems Nagami Basic Carrier Board";
+ compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+ "allwinner,sun8i-t113s";
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2s1 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ broken-cd;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 0000000..4ffa6a0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "NetCube Systems Nagami Keypad Carrier Board";
+ compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+ "allwinner,sun8i-t113s";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: led-status-red {
+ gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>; /* PD16 */
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led_status_green: led-status-green {
+ gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>; /* PD22 */
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ tca8418: keypad@34 {
+ compatible = "ti,tca8418";
+ reg = <0x34>;
+ interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>; /* PF6 */
+ linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+ MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+ MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+ MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+ MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+ MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+ MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+ MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+ MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+ MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+ MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+ MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+ MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+ MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+ MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+ MATRIX_KEY(0x00, 0x03, KEY_OK)
+ >;
+ keypad,num-rows = <4>;
+ keypad,num-columns = <4>;
+ };
+};
+
+&pio {
+ gpio-line-names = "", "", "", "", // PA
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", // PB
+ "", "", "UART3_TX", "UART3_RX",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "eMMC_CLK", "eMMC_CMD", // PC
+ "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", // PD
+ "", "", "", "",
+ "", "USB_SEC_EN", "", "",
+ "", "", "", "",
+ "LED_STATUS_RED", "", "", "",
+ "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+ "", "", "", "",
+ "", "", "", "",
+ "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+ "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+ "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", // PF
+ "", "", "KEY_nINT", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+ "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+ "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 0000000..544d60c
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "NetCube Systems Nagami SoM";
+ compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+ aliases {
+ serial1 = &uart1; // ESP32 Bootloader UART
+ serial3 = &uart3; // Console UART on Card Edge
+ ethernet0 = &emac;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ /* module wide 3.3V supply directly from the card edge */
+ reg_vcc3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+ reg_vcc_core: regulator-core {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-core";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ vin-supply = <®_vcc3v3>;
+ };
+
+ /* USB0 MUX to switch connect to Card-Edge only after BootROM */
+ usb0_sec_mux: mux-controller{
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+ mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+ idle-state = <1>; /* USB connected to Card-Edge by default */
+ };
+
+ /* Reset of ESP32 */
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+ post-power-on-delay-ms = <1500>;
+ power-off-delay-us = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vcc_core>;
+};
+
+&cpu1 {
+ cpu-supply = <®_vcc_core>;
+};
+
+&dcxo {
+ clock-frequency = <24000000>;
+};
+
+&emac {
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
+ phy-handle = <&lan8720a>;
+ phy-mode = "rmii";
+ pinctrl-0 = <&rmii_pe_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+ pinctrl-0 = <&i2c2_pd_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+ pinctrl-0 = <&i2c3_pg_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ eeprom0: eeprom@50 {
+ compatible = "atmel,24c02"; /* actually it's a 24AA02E48 */
+ reg = <0x50>;
+ pagesize = <16>;
+ read-only;
+ vcc-supply = <®_vcc3v3>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@fa {
+ reg = <0xfa 0x06>;
+ };
+ };
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+ pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+ lan8720a: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+ pinctrl-0 = <&mmc2_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&pio {
+ vcc-pb-supply = <®_vcc3v3>;
+ vcc-pc-supply = <®_vcc3v3>;
+ vcc-pd-supply = <®_vcc3v3>;
+ vcc-pe-supply = <®_vcc3v3>;
+ vcc-pf-supply = <®_vcc3v3>;
+ vcc-pg-supply = <®_vcc3v3>;
+
+ gpio-line-names = "", "", "", "", // PA
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "CAN0_TX", "CAN0_RX", // PB
+ "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "eMMC_CLK", "eMMC_CMD", // PC
+ "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "", // PD
+ "", "", "", "",
+ "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+ "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+ "PD16", "", "", "",
+ "I2C2_SCL", "I2C2_SDA", "PD22", "",
+ "", "", "", "",
+ "", "", "", "",
+ "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+ "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+ "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+ "SD_D3", "SD_D2", "PF6", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+ "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+ "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+ "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+ pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+ "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+ pinctrl-names = "default";
+ cs-gpios = <0>;
+ status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+ pinctrl-0 = <&uart1_pg6_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+ pinctrl-0 = <&uart3_pb_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index aba7451..0f0b5b7 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,8 +19,11 @@
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-catalina.dtb \
+ aspeed-bmc-facebook-clemente.dtb \
aspeed-bmc-facebook-cmm.dtb \
+ aspeed-bmc-facebook-darwin.dtb \
aspeed-bmc-facebook-elbert.dtb \
+ aspeed-bmc-facebook-fuji-data64.dtb \
aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-greatlakes.dtb \
@@ -31,6 +34,7 @@
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
+ aspeed-bmc-facebook-wedge400-data64.dtb \
aspeed-bmc-facebook-wedge400.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
index c435359..53b4372 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -243,7 +243,7 @@ temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
- temperature-sensor@4a{
+ temperature-sensor@4a {
compatible = "ti,tmp75";
reg = <0x4a>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
index 9605cca..b550a48 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -171,7 +171,7 @@ eeprom@50 {
reg = <0x50>;
};
dps650ab@58 {
- compatible = "dps650ab";
+ compatible = "delta,dps650ab";
reg = <0x58>;
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
index 93190f4..3ebd80d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -106,11 +106,15 @@ eeprom@57 {
compatible = "st,24c128", "atmel,24c128";
reg = <0x57>;
pagesize = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
- eth0_macaddress: macaddress@3f80 {
- reg = <0x3f80 6>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
index 9d00ce9..8c57a07 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -191,11 +191,15 @@ eeprom@57 {
compatible = "st,24c128", "atmel,24c128";
reg = <0x57>;
pagesize = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
- eth0_macaddress: macaddress@3f80 {
- reg = <0x3f80 6>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
index 6dd2216..e306655 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -134,11 +134,15 @@ eeprom@50 {
compatible = "st,24c128", "atmel,24c128";
reg = <0x50>;
pagesize = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
- eth0_macaddress: macaddress@3f80 {
- reg = <0x3f80 6>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 0943e0b..e61a6cb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -232,15 +232,19 @@ eeprom@57 {
compatible = "st,24c128", "atmel,24c128";
reg = <0x57>;
pagesize = <16>;
- #address-cells = <1>;
- #size-cells = <1>;
- eth0_macaddress: macaddress@3f80 {
- reg = <0x3f80 6>;
- };
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
- eth1_macaddress: macaddress@3f88 {
- reg = <0x3f88 6>;
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+
+ eth1_macaddress: macaddress@3f88 {
+ reg = <0x3f88 6>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 8d78651..14dd0ab 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -526,11 +526,11 @@ fan-3 {
tach-ch = /bits/ 8 <0x03>;
};
};
- fanctl0: fan-controller@21{
+ fanctl0: fan-controller@21 {
compatible = "maxim,max31790";
reg = <0x21>;
};
- fanctl1: fan-controller@27{
+ fanctl1: fan-controller@27 {
compatible = "maxim,max31790";
reg = <0x27>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 0000000..ecef44d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1283 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Clemente BMC";
+ compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c0mux0ch1mux0ch0;
+ i2c49 = &i2c0mux0ch1mux0ch1;
+ i2c50 = &i2c0mux0ch1mux0ch2;
+ i2c51 = &i2c0mux0ch1mux0ch3;
+ i2c52 = &i2c0mux3ch1mux0ch0;
+ i2c53 = &i2c0mux3ch1mux0ch1;
+ i2c54 = &i2c0mux3ch1mux0ch2;
+ i2c55 = &i2c0mux3ch1mux0ch3;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>;
+ };
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "BMC_GPIOC0","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","BMC_GPIOD4","","","",
+ /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "BMC_GPIOY4","BMC_GPIOY5","","",
+ /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B3*/ "","","","",
+ /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ // E1.S Backplane
+ i2c0mux0ch1mux0: i2c-mux@74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c0mux0ch1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c0mux0ch1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux0ch1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@20 {
+ compatible = "nxp,pca9535";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "RST_CX7_0",
+ "RST_CX7_1",
+ "CX0_SSD0_PRSNT_L",
+ "CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0",
+ "CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L",
+ "CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0",
+ "CX_OVT_SHDN_CX1",
+ "FNP_L_CX0",
+ "FNP_L_CX1",
+ "",
+ "MCU_GPIO",
+ "MCU_RST_N",
+ "MCU_RECOVERY_N";
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // OSFP 0 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+ };
+
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ // IOB0 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ // IOB0 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // E1.S Backplane HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ // E1.S Backplane MUX
+ i2c0mux3ch1mux0: i2c-mux@74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c0mux3ch1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c0mux3ch1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux3ch1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "SEC_RST_CX7_0",
+ "SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L",
+ "SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0",
+ "SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L",
+ "SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0",
+ "SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0",
+ "SEC_FNP_L_CX1",
+ "",
+ "SEC_MCU_GPIO",
+ "SEC_MCU_RST_N",
+ "SEC_MCU_RECOVERY_N";
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // OSFP 1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+ };
+
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ // IOB1 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ // IOB1 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ // PDB
+ power-monitor@12 {
+ compatible = "ti,lm5066i";
+ reg = <0x12>;
+ };
+
+ // PDB
+ power-monitor@14 {
+ compatible = "ti,lm5066i";
+ reg = <0x14>;
+ };
+
+ // Module 0
+ fanctl0: fan-controller@20{
+ compatible = "maxim,max31790";
+ reg = <0x20>;
+ };
+
+ // Module 0
+ fanctl1: fan-controller@23{
+ compatible = "maxim,max31790";
+ reg = <0x23>;
+ };
+
+ // Module 1
+ fanctl2: fan-controller@2c{
+ compatible = "maxim,max31790";
+ reg = <0x2c>;
+ };
+
+ // Module 1
+ fanctl3: fan-controller@2f{
+ compatible = "maxim,max31790";
+ reg = <0x2f>;
+ };
+
+ // Module 0 Leak Sensor
+ adc@34 {
+ compatible = "maxim,max1363";
+ reg = <0x34>;
+ };
+
+ // Module 1 Leak Sensor
+ adc@35 {
+ compatible = "maxim,max1363";
+ reg = <0x35>;
+ };
+
+ // PDB TEMP SENSOR
+ temperature-sensor@4e {
+ compatible = "ti,tmp1075";
+ reg = <0x4e>;
+ };
+
+ // PDB FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ // PDB
+ vrm@60 {
+ compatible = "renesas,raa228004";
+ reg = <0x60>;
+ };
+
+ // PDB
+ vrm@61 {
+ compatible = "renesas,raa228004";
+ reg = <0x61>;
+ };
+
+ // Interposer
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // Interposer TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ // Interposer FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+ };
+
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // Interposer IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "JTAG_MUX_SEL",
+ "IOX_BMC_RESET",
+ "RTC_CLR_L",
+ "RTC_U77_ALRT_N",
+ "",
+ "PSU_ALERT_N",
+ "",
+ "RST_P12V_STBY_N";
+ };
+ };
+
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ // FIO FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ // Module 0, Expander @0x20
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L-I",
+ "FPGA_READY_BMC-I",
+ "HMC_BMC_DETECT-O",
+ "HMC_PGOOD-O",
+ "",
+ "BMC_STBY_CYCLE-O",
+ "FPGA_EROT_FATAL_ERROR_L-I",
+ "WP_HW_EXT_CTRL_L-O",
+ "EROT_FPGA_RST_L-O",
+ "FPGA_EROT_RECOVERY_L-O",
+ "BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "USB2_HUB_RST_L-O",
+ "",
+ "SGPIO_EN_L-O",
+ "B2B_IOEXP_INT_L-I",
+ "I2C_BUS_MUX_RESET_L-O";
+ };
+
+ // Module 1, Expander @0x21
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "SEC_FPGA_THERM_OVERT_L",
+ "SEC_FPGA_READY_BMC",
+ "SEC_HMC_BMC_DETECT",
+ "SEC_HMC_PGOOD",
+ "",
+ "SEC_BMC_SELF_POWER_CYCLE",
+ "SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+ "SEC_WP_HW_EXT_CTRL_L",
+ "SEC_EROT_FPGA_RST_L",
+ "SEC_FPGA_EROT_RECOVERY_L",
+ "SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+ "SEC_USB2_HUB_RST_L",
+ "",
+ "SEC_SGPIO_EN_L",
+ "SEC_IOB_IOEXP_INT_L",
+ "SEC_I2C_BUS_MUX_RESET_L";
+ };
+
+ // HMC Expander @0x27
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "HMC_PRSNT_L-I",
+ "HMC_READY-I",
+ "HMC_EROT_FATAL_ERROR_L-I",
+ "I2C_MUX_SEL-O",
+ "HMC_EROT_SPI_MUX_SEL-O",
+ "HMC_EROT_RECOVERY_L-O",
+ "HMC_EROT_RST_L-O",
+ "GLOBAL_WP_HMC-O",
+ "FPGA_RST_L-O",
+ "USB2_HUB_RST-O",
+ "CPU_UART_MUX_SEL-O",
+ "",
+ "",
+ "",
+ "",
+ "";
+ };
+
+ // Module 0 Aux EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 Aux EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ io_expander3: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "RTC_MUX_SEL",
+ "PCI_MUX_SEL",
+ "TPM_MUX_SEL",
+ "FAN_MUX-SEL",
+ "SGMII_MUX_SEL",
+ "DP_MUX_SEL",
+ "UPHY3_USB_SEL",
+ "NCSI_MUX_SEL",
+ "BMC_PHY_RST",
+ "RTC_CLR_L",
+ "BMC_12V_CTRL",
+ "PS_RUN_IO0_PG",
+ "",
+ "",
+ "",
+ "";
+ };
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+ // SCM TEMP SENSOR BOARD
+ temperature-sensor@4b {
+ compatible = "national,lm75b";
+ reg = <0x4b>;
+ };
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "stby_power_en_cpld",
+ "stby_power_gd_cpld",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ multi-master;
+ mctp-controller;
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ multi-master;
+
+ // HPM 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ // CBC 2 FRU
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+ // CBC 3 FRU
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+ multi-master;
+
+ // HPM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // CBC 0 FRU
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+
+ // CBC 1 FRU
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ // PDB CPLD IOEXP 0x10
+ io_expander9: gpio@10 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "wSequence_Latch_State_N",
+ "wP12V_N1N2_RUNTIME_FLT_N",
+ "wP12V_FAN_RUNTIME_FLT_N",
+ "wP12V_AUX_RUNTIME_FLT_N",
+ "wHost_PERST_SEQPWR_FLT_N",
+ "wP12V_N1N2_SEQPWR_FLT_N",
+ "wP12V_FAN_SEQPWR_FLT_N",
+ "wP12V_AUX_SEQPWR_FLT_N",
+ "wP12V_RUNTIME_FLT_NIC1_N",
+ "wAUX_RUNTIME_FLT_NIC1_N",
+ "wP12V_SEQPWR_FLT_NIC1_N",
+ "wAUX_SEQPWR_FLT_NIC1_N",
+ "wP12V_RUNTIME_FLT_NIC0_N",
+ "wAUX_RUNTIME_FLT_NIC0_N",
+ "wP12V_SEQPWR_FLT_NIC0_N",
+ "wAUX_SEQPWR_FLT_NIC0_N";
+ };
+
+ // PDB CPLD IOEXP 0x11
+ io_expander10: gpio@11 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "FM_P12V_NIC1_FLTB_R_N",
+ "FM_P3V3_NIC1_FAULT_R_N",
+ "FM_P12V_NIC0_FLTB_R_N",
+ "FM_P3V3_NIC0_FAULT_R_N",
+ "P48V_HS2_FAULT_N_PLD",
+ "P48V_HS1_FAULT_N_PLD",
+ "P12V_AUX_FAN_OC_PLD_N",
+ "P12V_AUX_FAN_FAULT_PLD_N",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "FM_SYS_THROTTLE_N",
+ "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+ };
+
+ // PDB CPLD IOEXP 0x12
+ io_expander11: gpio@12 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "P12V_AUX_PSU_SMB_ALERT_R_L",
+ "P12V_SCM_SENSE_ALERT_R_N",
+ "P12V_AUX_NIC1_SENSE_ALERT_R_N",
+ "P12V_AUX_NIC0_SENSE_ALERT_R_N",
+ "NODEB_PSU_SMB_ALERT_R_L",
+ "NODEA_PSU_SMB_ALERT_R_L",
+ "P12V_AUX_FAN_ALERT_PLD_N",
+ "P52V_SENSE_ALERT_PLD_N",
+ "PRSNT_RJ45_FIO_N_R",
+ "FM_MAIN_PWREN_RMC_EN_ISO_R",
+ "CHASSIS3_LEAK_Q_N_PLD",
+ "CHASSIS2_LEAK_Q_N_PLD",
+ "CHASSIS1_LEAK_Q_N_PLD",
+ "CHASSIS0_LEAK_Q_N_PLD",
+ "",
+ "SMB_RJ45_FIO_TMP_ALERT";
+ };
+
+ // PDB CPLD IOEXP 0x13
+ io_expander12: gpio@13 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "FAN_7_PRESENT_N",
+ "FAN_6_PRESENT_N",
+ "FAN_5_PRESENT_N",
+ "FAN_4_PRESENT_N",
+ "FAN_3_PRESENT_N",
+ "FAN_2_PRESENT_N",
+ "FAN_1_PRESENT_N",
+ "FAN_0_PRESENT_N",
+ "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+ "HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+ "PRSNT_HDDBD_POWER_CABLE_N",
+ "PRSNT_OSFP0_POWER_CABLE_N",
+ "PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+ };
+
+ // PDB CPLD IOEXP 0x14
+ io_expander13: gpio@14 {
+ compatible = "nxp,pca9555";
+ reg = <0x14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "rmc_en_dc_pwr_on",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "leak_config_0",
+ "leak_config_1",
+ "leak_config_2",
+ "leak_config_3",
+ "mfg_led_test_mode_l",
+ "small_leak_err_inj",
+ "large_leak_err_inj",
+ "";
+ };
+};
+
+&i2c15 {
+ status = "okay";
+ multi-master;
+ mctp-controller;
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+};
+
+&udma {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 0000000..58c107a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Darwin BMC";
+ compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+ <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+ };
+
+ spi_gpio: spi {
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c0 {
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ };
+};
+
+&adc0 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
index 74f3c67..ff1009e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -201,3 +201,15 @@ fixed-link {
full-duplex;
};
};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 0000000..aa9576d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1256 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Fuji BMC (64MB Datastore)";
+ compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+ aliases {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c40 = &imux40;
+ i2c41 = &imux41;
+ i2c42 = &imux42;
+ i2c43 = &imux43;
+ i2c44 = &imux44;
+ i2c45 = &imux45;
+ i2c46 = &imux46;
+ i2c47 = &imux47;
+
+ /*
+ * PCA9548 (24-0071) provides 8 channels connecting to
+ * PDB-Left.
+ */
+ i2c48 = &imux48;
+ i2c49 = &imux49;
+ i2c50 = &imux50;
+ i2c51 = &imux51;
+ i2c52 = &imux52;
+ i2c53 = &imux53;
+ i2c54 = &imux54;
+ i2c55 = &imux55;
+
+ /*
+ * PCA9548 (25-0072) provides 8 channels connecting to
+ * PDB-Right.
+ */
+ i2c56 = &imux56;
+ i2c57 = &imux57;
+ i2c58 = &imux58;
+ i2c59 = &imux59;
+ i2c60 = &imux60;
+ i2c61 = &imux61;
+ i2c62 = &imux62;
+ i2c63 = &imux63;
+
+ /*
+ * PCA9548 (26-0076) provides 8 channels connecting to
+ * FCM1.
+ */
+ i2c64 = &imux64;
+ i2c65 = &imux65;
+ i2c66 = &imux66;
+ i2c67 = &imux67;
+ i2c68 = &imux68;
+ i2c69 = &imux69;
+ i2c70 = &imux70;
+ i2c71 = &imux71;
+
+ /*
+ * PCA9548 (27-0076) provides 8 channels connecting to
+ * FCM2.
+ */
+ i2c72 = &imux72;
+ i2c73 = &imux73;
+ i2c74 = &imux74;
+ i2c75 = &imux75;
+ i2c76 = &imux76;
+ i2c77 = &imux77;
+ i2c78 = &imux78;
+ i2c79 = &imux79;
+
+ /*
+ * PCA9548 (40-0076) provides 8 channels connecting to
+ * PIM1.
+ */
+ i2c80 = &imux80;
+ i2c81 = &imux81;
+ i2c82 = &imux82;
+ i2c83 = &imux83;
+ i2c84 = &imux84;
+ i2c85 = &imux85;
+ i2c86 = &imux86;
+ i2c87 = &imux87;
+
+ /*
+ * PCA9548 (41-0076) provides 8 channels connecting to
+ * PIM2.
+ */
+ i2c88 = &imux88;
+ i2c89 = &imux89;
+ i2c90 = &imux90;
+ i2c91 = &imux91;
+ i2c92 = &imux92;
+ i2c93 = &imux93;
+ i2c94 = &imux94;
+ i2c95 = &imux95;
+
+ /*
+ * PCA9548 (42-0076) provides 8 channels connecting to
+ * PIM3.
+ */
+ i2c96 = &imux96;
+ i2c97 = &imux97;
+ i2c98 = &imux98;
+ i2c99 = &imux99;
+ i2c100 = &imux100;
+ i2c101 = &imux101;
+ i2c102 = &imux102;
+ i2c103 = &imux103;
+
+ /*
+ * PCA9548 (43-0076) provides 8 channels connecting to
+ * PIM4.
+ */
+ i2c104 = &imux104;
+ i2c105 = &imux105;
+ i2c106 = &imux106;
+ i2c107 = &imux107;
+ i2c108 = &imux108;
+ i2c109 = &imux109;
+ i2c110 = &imux110;
+ i2c111 = &imux111;
+
+ /*
+ * PCA9548 (44-0076) provides 8 channels connecting to
+ * PIM5.
+ */
+ i2c112 = &imux112;
+ i2c113 = &imux113;
+ i2c114 = &imux114;
+ i2c115 = &imux115;
+ i2c116 = &imux116;
+ i2c117 = &imux117;
+ i2c118 = &imux118;
+ i2c119 = &imux119;
+
+ /*
+ * PCA9548 (45-0076) provides 8 channels connecting to
+ * PIM6.
+ */
+ i2c120 = &imux120;
+ i2c121 = &imux121;
+ i2c122 = &imux122;
+ i2c123 = &imux123;
+ i2c124 = &imux124;
+ i2c125 = &imux125;
+ i2c126 = &imux126;
+ i2c127 = &imux127;
+
+ /*
+ * PCA9548 (46-0076) provides 8 channels connecting to
+ * PIM7.
+ */
+ i2c128 = &imux128;
+ i2c129 = &imux129;
+ i2c130 = &imux130;
+ i2c131 = &imux131;
+ i2c132 = &imux132;
+ i2c133 = &imux133;
+ i2c134 = &imux134;
+ i2c135 = &imux135;
+
+ /*
+ * PCA9548 (47-0076) provides 8 channels connecting to
+ * PIM8.
+ */
+ i2c136 = &imux136;
+ i2c137 = &imux137;
+ i2c138 = &imux138;
+ i2c139 = &imux139;
+ i2c140 = &imux140;
+ i2c141 = &imux141;
+ i2c142 = &imux142;
+ i2c143 = &imux143;
+ };
+
+ spi_gpio: spi {
+ num-chipselects = <3>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+ <0>, /* device reg=<1> does not exist */
+ <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+ eeprom@2 {
+ compatible = "atmel,at93c46d";
+ spi-max-frequency = <250000>;
+ data-size = <16>;
+ spi-cs-high;
+ reg = <2>;
+ };
+ };
+};
+
+&fmc {
+ flash@0 {
+ /delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+ };
+};
+
+&i2c0 {
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c2 {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+ * Controller Module).
+ */
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <1500>;
+ };
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c8 {
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ imux48: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux49: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux50: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ lp5012@14 {
+ compatible = "ti,lp5012";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "sys";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "fan";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "psu";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "smb";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+ };
+ };
+
+ imux51: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux52: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux53: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux54: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux55: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ imux56: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux57: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux58: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux59: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux60: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux61: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux62: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux63: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux64: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux65: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux66: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux67: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux68: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux69: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux70: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux71: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux72: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux73: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux74: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux75: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux76: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux77: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux78: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux79: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ imux40: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux80: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux81: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux82: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux83: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux84: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux85: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux86: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux87: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux41: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux88: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux89: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux90: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux91: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux92: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux93: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux94: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux95: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux42: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux96: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux97: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux98: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux99: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux100: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux101: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux102: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux103: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux43: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux104: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux105: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux106: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux107: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux108: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux109: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux110: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux111: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux44: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux112: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux113: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux114: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux115: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux116: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux117: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux118: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux119: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux45: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux120: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux121: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux122: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux123: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux124: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux125: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux126: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux127: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux46: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux128: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux129: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux130: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux131: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux132: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux133: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux134: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux135: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux47: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux136: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux137: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux138: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux139: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux140: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux141: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux142: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux143: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy3: ethernet-phy@13 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0d>;
+ };
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
index f23c26a..5dc2a16 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -1,1251 +1,16 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2020 Facebook Inc.
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-fuji-data64.dts"
/ {
model = "Facebook Fuji BMC";
compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+};
- aliases {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to
- * SCM (System Controller Module).
- */
- i2c16 = &imux16;
- i2c17 = &imux17;
- i2c18 = &imux18;
- i2c19 = &imux19;
- i2c20 = &imux20;
- i2c21 = &imux21;
- i2c22 = &imux22;
- i2c23 = &imux23;
-
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
- i2c28 = &imux28;
- i2c29 = &imux29;
- i2c30 = &imux30;
- i2c31 = &imux31;
-
- /*
- * PCA9548 (11-0077) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c40 = &imux40;
- i2c41 = &imux41;
- i2c42 = &imux42;
- i2c43 = &imux43;
- i2c44 = &imux44;
- i2c45 = &imux45;
- i2c46 = &imux46;
- i2c47 = &imux47;
-
- /*
- * PCA9548 (24-0071) provides 8 channels connecting to
- * PDB-Left.
- */
- i2c48 = &imux48;
- i2c49 = &imux49;
- i2c50 = &imux50;
- i2c51 = &imux51;
- i2c52 = &imux52;
- i2c53 = &imux53;
- i2c54 = &imux54;
- i2c55 = &imux55;
-
- /*
- * PCA9548 (25-0072) provides 8 channels connecting to
- * PDB-Right.
- */
- i2c56 = &imux56;
- i2c57 = &imux57;
- i2c58 = &imux58;
- i2c59 = &imux59;
- i2c60 = &imux60;
- i2c61 = &imux61;
- i2c62 = &imux62;
- i2c63 = &imux63;
-
- /*
- * PCA9548 (26-0076) provides 8 channels connecting to
- * FCM1.
- */
- i2c64 = &imux64;
- i2c65 = &imux65;
- i2c66 = &imux66;
- i2c67 = &imux67;
- i2c68 = &imux68;
- i2c69 = &imux69;
- i2c70 = &imux70;
- i2c71 = &imux71;
-
- /*
- * PCA9548 (27-0076) provides 8 channels connecting to
- * FCM2.
- */
- i2c72 = &imux72;
- i2c73 = &imux73;
- i2c74 = &imux74;
- i2c75 = &imux75;
- i2c76 = &imux76;
- i2c77 = &imux77;
- i2c78 = &imux78;
- i2c79 = &imux79;
-
- /*
- * PCA9548 (40-0076) provides 8 channels connecting to
- * PIM1.
- */
- i2c80 = &imux80;
- i2c81 = &imux81;
- i2c82 = &imux82;
- i2c83 = &imux83;
- i2c84 = &imux84;
- i2c85 = &imux85;
- i2c86 = &imux86;
- i2c87 = &imux87;
-
- /*
- * PCA9548 (41-0076) provides 8 channels connecting to
- * PIM2.
- */
- i2c88 = &imux88;
- i2c89 = &imux89;
- i2c90 = &imux90;
- i2c91 = &imux91;
- i2c92 = &imux92;
- i2c93 = &imux93;
- i2c94 = &imux94;
- i2c95 = &imux95;
-
- /*
- * PCA9548 (42-0076) provides 8 channels connecting to
- * PIM3.
- */
- i2c96 = &imux96;
- i2c97 = &imux97;
- i2c98 = &imux98;
- i2c99 = &imux99;
- i2c100 = &imux100;
- i2c101 = &imux101;
- i2c102 = &imux102;
- i2c103 = &imux103;
-
- /*
- * PCA9548 (43-0076) provides 8 channels connecting to
- * PIM4.
- */
- i2c104 = &imux104;
- i2c105 = &imux105;
- i2c106 = &imux106;
- i2c107 = &imux107;
- i2c108 = &imux108;
- i2c109 = &imux109;
- i2c110 = &imux110;
- i2c111 = &imux111;
-
- /*
- * PCA9548 (44-0076) provides 8 channels connecting to
- * PIM5.
- */
- i2c112 = &imux112;
- i2c113 = &imux113;
- i2c114 = &imux114;
- i2c115 = &imux115;
- i2c116 = &imux116;
- i2c117 = &imux117;
- i2c118 = &imux118;
- i2c119 = &imux119;
-
- /*
- * PCA9548 (45-0076) provides 8 channels connecting to
- * PIM6.
- */
- i2c120 = &imux120;
- i2c121 = &imux121;
- i2c122 = &imux122;
- i2c123 = &imux123;
- i2c124 = &imux124;
- i2c125 = &imux125;
- i2c126 = &imux126;
- i2c127 = &imux127;
-
- /*
- * PCA9548 (46-0076) provides 8 channels connecting to
- * PIM7.
- */
- i2c128 = &imux128;
- i2c129 = &imux129;
- i2c130 = &imux130;
- i2c131 = &imux131;
- i2c132 = &imux132;
- i2c133 = &imux133;
- i2c134 = &imux134;
- i2c135 = &imux135;
-
- /*
- * PCA9548 (47-0076) provides 8 channels connecting to
- * PIM8.
- */
- i2c136 = &imux136;
- i2c137 = &imux137;
- i2c138 = &imux138;
- i2c139 = &imux139;
- i2c140 = &imux140;
- i2c141 = &imux141;
- i2c142 = &imux142;
- i2c143 = &imux143;
+&fmc {
+ flash@0 {
+ /delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
};
-
- spi_gpio: spi {
- num-chipselects = <3>;
- cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
- <0>, /* device reg=<1> does not exist */
- <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-
- eeprom@2 {
- compatible = "atmel,at93c46d";
- spi-max-frequency = <250000>;
- data-size = <16>;
- spi-cs-high;
- reg = <2>;
- };
- };
-};
-
-&i2c0 {
- multi-master;
- bus-frequency = <1000000>;
-};
-
-&i2c2 {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
- * Controller Module).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux16: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- adm1278@10 {
- compatible = "adi,adm1278";
- reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
- shunt-resistor-micro-ohms = <1500>;
- };
- };
-
- imux17: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux18: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux19: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux20: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux21: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux22: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux23: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c8 {
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
- * Main Board).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- i2c-mux@71 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x71>;
- i2c-mux-idle-disconnect;
-
- imux48: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux49: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux50: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- lp5012@14 {
- compatible = "ti,lp5012";
- reg = <0x14>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- multi-led@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "sys";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "fan";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "psu";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "smb";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
- };
- };
-
- imux51: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux52: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux53: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux54: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux55: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- i2c-mux@72 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72>;
- i2c-mux-idle-disconnect;
-
- imux56: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux57: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux58: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux59: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux60: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux61: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux62: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux63: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux64: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux65: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux66: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux67: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- adm1278@10 {
- compatible = "adi,adm1278";
- reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
- shunt-resistor-micro-ohms = <250>;
- };
- };
-
- imux68: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux69: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux70: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux71: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux72: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux73: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux74: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux75: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- adm1278@10 {
- compatible = "adi,adm1278";
- reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
- shunt-resistor-micro-ohms = <250>;
- };
- };
-
- imux76: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux77: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux78: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux79: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux28: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux29: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux30: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux31: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c11 {
- status = "okay";
-
- /*
- * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
- * Main Board).
- */
- i2c-mux@77 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x77>;
- i2c-mux-idle-disconnect;
-
- imux40: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux80: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux81: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux82: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux83: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux84: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux85: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux86: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux87: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux41: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux88: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux89: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux90: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux91: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux92: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux93: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux94: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux95: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux42: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux96: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux97: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux98: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux99: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux100: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux101: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux102: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux103: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux43: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux104: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux105: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux106: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux107: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux108: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux109: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux110: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux111: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux44: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux112: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux113: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux114: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux115: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux116: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux117: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux118: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux119: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux45: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux120: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux121: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux122: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux123: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux124: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux125: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux126: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux127: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux46: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux128: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux129: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux130: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux131: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux132: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux133: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux134: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux135: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux47: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux136: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux137: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux138: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux139: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux140: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux141: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux142: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux143: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- };
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&mdio1 {
- status = "okay";
-
- ethphy3: ethernet-phy@13 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x0d>;
- };
-};
-
-&mac3 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <ðphy3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rgmii4_default>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index b9a93f2..b733efe 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -183,11 +183,9 @@ &kcs3 {
&i2c0 {
status = "okay";
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
@@ -234,7 +232,7 @@ gpio@12 {
"","",
"","",
"","",
- "","fcb1-activate",
+ "","fcb2-activate",
"","";
};
};
@@ -257,11 +255,9 @@ eeprom@50 {
&i2c2 {
status = "okay";
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
@@ -308,7 +304,7 @@ gpio@12 {
"","",
"","",
"","",
- "","fcb0-activate",
+ "","fcb1-activate",
"","";
};
};
@@ -373,6 +369,12 @@ power-monitor@40 {
compatible = "infineon,xdp710";
reg = <0x40>;
};
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <500>;
+ };
};
&i2c5 {
@@ -514,6 +516,10 @@ imux28: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ power-sensor@20 {
+ compatible = "mps,mp5990";
+ reg = <0x20>;
+ };
power-monitor@61 {
compatible = "isil,isl69260";
reg = <0x61>;
@@ -692,14 +698,14 @@ &sgpiom0 {
"","",
/*A4-A7 line 8-15*/
"","power-config-asic-module-enable",
- "","power-config-asic-power-good",
- "","power-config-pdb-power-good",
+ "power-p3v3-standby","power-config-asic-power-good",
+ "power-p1v8-good","power-config-pdb-power-good",
"presence-cpu","smi-control-n",
/*B0-B3 line 16-23*/
"","nmi-control-n",
- "","nmi-control-sync-flood-n",
+ "power-pvdd33-s5","nmi-control-sync-flood-n",
"","",
- "","",
+ "power-pvdd18-s5","",
/*B4-B7 line 24-31*/
"","FM_CPU_SP5R1",
"reset-cause-rsmrst","FM_CPU_SP5R2",
@@ -743,7 +749,7 @@ &sgpiom0 {
/*F4-F7 line 88-95*/
"presence-asic-modules-0","rt-cpu0-p1-force-enable",
"presence-asic-modules-1","bios-debug-msg-disable",
- "","uart-control-buffer-select",
+ "power-asic-good","uart-control-buffer-select",
"presence-cmm","ac-control-n",
/*G0-G3 line 96-103*/
"FM_CPU_CORETYPE2","",
@@ -795,7 +801,7 @@ &sgpiom0 {
"asic0-card-type-detection2-n","",
"uart-switch-lsb","",
"uart-switch-msb","",
- "","",
+ "power-12v-memory-good","",
/*M4-M7 line 200-207*/
"","","","","","","","",
/*N0-N3 line 208-215*/
@@ -803,7 +809,10 @@ &sgpiom0 {
/*N4-N7 line 216-223*/
"","","","","","","","",
/*O0-O3 line 224-231*/
- "","","","","","","","",
+ "","",
+ "irq-pvddcore0-ocp-alert","",
+ "irq-pvddcore1-ocp-alert","",
+ "","",
/*O4-O7 line 232-239*/
"","","","","","","","",
/*P0-P3 line 240-247*/
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index ef96b17..eb8d4b9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -312,11 +312,9 @@ eeprom@50 {
reg = <0x50>;
};
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
@@ -435,11 +433,9 @@ eeprom@50 {
reg = <0x50>;
};
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
@@ -558,11 +554,9 @@ eeprom@50 {
reg = <0x50>;
};
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
@@ -681,11 +675,9 @@ eeprom@50 {
reg = <0x50>;
};
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
@@ -804,11 +796,9 @@ eeprom@50 {
reg = <0x50>;
};
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
@@ -926,11 +916,9 @@ eeprom@50 {
reg = <0x50>;
};
- pwm@5e{
- compatible = "max31790";
+ pwm@5e {
+ compatible = "maxim,max31790";
reg = <0x5e>;
- #address-cells = <1>;
- #size-cells = <0>;
};
power-sensor@40 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
index ee93a97..72c84f3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -233,7 +233,7 @@ gpio@20 {
"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
};
- fan-controller@21{
+ fan-controller@21 {
compatible = "maxim,max31790";
reg = <0x21>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
index 704ee68..5d4c7d9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -508,7 +508,7 @@ &i2c7 {
status = "okay";
//HSC, AirMax Conn A
adm1278@45 {
- compatible = "adm1275";
+ compatible = "adi,adm1275";
reg = <0x45>;
shunt-resistor-micro-ohms = <250>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 0000000..1d46eae
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Wedge 400 BMC (64MB Datastore)";
+ compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+ aliases {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (11-0076) provides 8 channels connecting to
+ * FCM (Fan Controller Module).
+ */
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+
+ spi2 = &spi_gpio;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ ast-adc-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+ };
+
+ /*
+ * GPIO-based SPI Master is required to access SPI TPM, because
+ * full-duplex SPI transactions are not supported by ASPEED SPI
+ * Controllers.
+ */
+ spi_gpio: spi {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+ sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash1";
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+ status = "okay";
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&sdhci1 {
+ max-frequency = <25000000>;
+ /*
+ * DMA mode needs to be disabled to avoid conflicts with UHCI
+ * Controller in AST2500 SoC.
+ */
+ sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index 5a8169b..ef0cfc5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -1,376 +1,14 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
/ {
model = "Facebook Wedge 400 BMC";
compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
- aliases {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to
- * SCM (System Controller Module).
- */
- i2c16 = &imux16;
- i2c17 = &imux17;
- i2c18 = &imux18;
- i2c19 = &imux19;
- i2c20 = &imux20;
- i2c21 = &imux21;
- i2c22 = &imux22;
- i2c23 = &imux23;
-
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
- i2c28 = &imux28;
- i2c29 = &imux29;
- i2c30 = &imux30;
- i2c31 = &imux31;
-
- /*
- * PCA9548 (11-0076) provides 8 channels connecting to
- * FCM (Fan Controller Module).
- */
- i2c32 = &imux32;
- i2c33 = &imux33;
- i2c34 = &imux34;
- i2c35 = &imux35;
- i2c36 = &imux36;
- i2c37 = &imux37;
- i2c38 = &imux38;
- i2c39 = &imux39;
-
- spi2 = &spi_gpio;
- };
-
- chosen {
- stdout-path = &uart1;
- bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
- };
-
- ast-adc-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
- <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
- };
-
- /*
- * GPIO-based SPI Master is required to access SPI TPM, because
- * full-duplex SPI transactions are not supported by ASPEED SPI
- * Controllers.
- */
- spi_gpio: spi {
- status = "okay";
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
- gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
- num-chipselects = <1>;
-
- tpm@0 {
- compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
- spi-max-frequency = <33000000>;
- reg = <0>;
- };
- };
};
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
&fmc_flash0 {
+ /delete-node/partitions;
#include "facebook-bmc-flash-layout-128.dtsi"
};
-
-&fmc_flash1 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- flash1@0 {
- reg = <0x0 0x8000000>;
- label = "flash1";
- };
- };
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd2_default
- &pinctrl_rxd2_default>;
-};
-
-&uart4 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd4_default
- &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
- status = "okay";
- multi-master;
- bus-frequency = <1000000>;
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux16: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux17: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux18: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux19: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux20: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux21: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux22: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux23: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2c8 {
- status = "okay";
-
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux28: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux29: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux30: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux31: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c9 {
- status = "okay";
-};
-
-&i2c10 {
- status = "okay";
-};
-
-&i2c11 {
- status = "okay";
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux32: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux33: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux34: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux35: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux36: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux37: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux38: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux39: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
-};
-
-&adc {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&uhci {
- status = "okay";
-};
-
-&sdhci1 {
- max-frequency = <25000000>;
- /*
- * DMA mode needs to be disabled to avoid conflicts with UHCI
- * Controller in AST2500 SoC.
- */
- sdhci-caps-mask = <0x0 0x580000>;
-};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index aae789854..60b98d6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1186,19 +1186,19 @@ adc@1f {
ti,mode = /bits/ 8 <1>;
};
- pwm@20{
+ pwm@20 {
compatible = "maxim,max31790";
reg = <0x20>;
};
- gpio@22{
+ gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
- pwm@2f{
+ pwm@2f {
compatible = "maxim,max31790";
reg = <0x2f>;
};
@@ -1234,19 +1234,19 @@ adc@1f {
ti,mode = /bits/ 8 <1>;
};
- pwm@20{
+ pwm@20 {
compatible = "maxim,max31790";
reg = <0x20>;
};
- gpio@22{
+ gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
};
- pwm@2f{
+ pwm@2f {
compatible = "maxim,max31790";
reg = <0x2f>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 4d9e2cd..9f144f5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2808,6 +2808,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam4_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -2824,6 +2825,7 @@ eeprom@0 {
};
cfam4_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -2840,8 +2842,8 @@ eeprom@0 {
};
cfam4_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -2857,8 +2859,8 @@ eeprom@0 {
};
cfam4_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -3181,6 +3183,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam5_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -3197,6 +3200,7 @@ eeprom@0 {
};
cfam5_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -3213,8 +3217,8 @@ eeprom@0 {
};
cfam5_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -3230,8 +3234,8 @@ eeprom@0 {
};
cfam5_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -3554,6 +3558,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam6_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -3570,6 +3575,7 @@ eeprom@0 {
};
cfam6_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -3586,8 +3592,8 @@ eeprom@0 {
};
cfam6_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -3603,8 +3609,8 @@ eeprom@0 {
};
cfam6_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -3927,6 +3933,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam7_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -3943,6 +3950,7 @@ eeprom@0 {
};
cfam7_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -3959,8 +3967,8 @@ eeprom@0 {
};
cfam7_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -3976,8 +3984,8 @@ eeprom@0 {
};
cfam7_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index 757421b..c5fb5d4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -263,7 +263,7 @@ eeprom@51 {
reg = <0x51>;
};
- tca_pres1: tca9554@20{
+ tca_pres1: tca9554@20 {
compatible = "ti,tca9554";
reg = <0x20>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
index 8d98be3..dbadba8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -3778,10 +3778,10 @@ smb_svc_pex_rssd01_16: pinctrl@20 {
pinctrl-0 = <&U65200_pins>;
pinctrl-names = "default";
U65200_pins: cfg-pins {
- pins = "gp60", "gp61", "gp62",
- "gp63", "gp64", "gp65", "gp66",
- "gp67", "gp70", "gp71", "gp72",
- "gp73", "gp74", "gp75", "gp76", "gp77";
+ pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+ "gp65", "gp66", "gp67", "gp70", "gp71",
+ "gp72", "gp73", "gp74", "gp75", "gp76",
+ "gp77";
function = "gpio";
input-enable;
bias-pull-up;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index 78a5656..79c6919 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -54,10 +54,9 @@ video_engine_memory: jpegbuffer {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2500-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
- no-gpio-delays;
memory-region = <&coldfire_memory>;
aspeed,sram = <&sram>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
index de61eac..fdcf449 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -151,7 +151,7 @@ &mac1 {
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
-&adc{
+&adc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default
@@ -211,7 +211,7 @@ &i2c1 {
status = "okay";
bus-frequency = <90000>;
HotSwap@10 {
- compatible = "adm1272";
+ compatible = "adi,adm1272";
reg = <0x10>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
index 41e3e9d..4de3861 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -126,6 +126,17 @@ button-uid {
gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
};
};
+
+ standby_power_regulator: standby-power-regulator {
+ status = "okay";
+ compatible = "regulator-fixed";
+ regulator-name = "standby_power";
+ gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
// Enable Primary flash on FMC for bring up activity
@@ -216,6 +227,30 @@ &uart_routing {
status = "okay";
};
+&mdio0 {
+ status = "okay";
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mdio3 {
+ status = "okay";
+ ethphy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy3>;
+ pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
&mac2 {
status = "okay";
phy-mode = "rmii";
@@ -247,7 +282,7 @@ &uhci {
};
&sgpiom0 {
- status="okay";
+ status = "okay";
ngpios = <128>;
gpio-line-names =
"","",
@@ -411,7 +446,7 @@ &i2c2 {
// I2C4
&i2c3 {
- status = "disabled";
+ status = "okay";
};
// I2C5
@@ -431,6 +466,7 @@ exp4: gpio@21 {
#interrupt-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&standby_power_regulator>;
gpio-line-names =
"RTC_MUX_SEL-O",
"PCI_MUX_SEL-O",
@@ -464,6 +500,7 @@ i2c-mux@71 {
#size-cells = <0>;
reg = <0x71>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
imux16: i2c@0 {
#address-cells = <1>;
@@ -528,6 +565,7 @@ i2c-mux@72 {
#size-cells = <0>;
reg = <0x72>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
imux20: i2c@0 {
#address-cells = <1>;
@@ -545,6 +583,7 @@ gpio@21 {
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
+ vcc-supply = <&standby_power_regulator>;
gpio-line-names =
"RST_CX_0_L-O",
"RST_CX_1_L-O",
@@ -584,6 +623,7 @@ i2c-mux@73 {
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
imux24: i2c@0 {
#address-cells = <1>;
@@ -602,6 +642,7 @@ i2c-mux@70 {
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
i2c25mux0: i2c@0 {
#address-cells = <1>;
@@ -648,6 +689,7 @@ i2c-mux@75 {
#size-cells = <0>;
reg = <0x75>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
imux28: i2c@0 {
#address-cells = <1>;
@@ -712,6 +754,7 @@ i2c-mux@76 {
#size-cells = <0>;
reg = <0x76>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
imux32: i2c@0 {
#address-cells = <1>;
@@ -729,6 +772,7 @@ gpio@21 {
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
+ vcc-supply = <&standby_power_regulator>;
gpio-line-names =
"SEC_RST_CX_0_L-O",
"SEC_RST_CX_1_L-O",
@@ -768,6 +812,7 @@ i2c-mux@77 {
#size-cells = <0>;
reg = <0x77>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
imux36: i2c@0 {
#address-cells = <1>;
@@ -862,6 +907,7 @@ exp0: gpio@20 {
#interrupt-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&standby_power_regulator>;
gpio-line-names =
"FPGA_THERM_OVERT_L-I",
"FPGA_READY_BMC-I",
@@ -891,6 +937,7 @@ exp1: gpio@21 {
#interrupt-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&standby_power_regulator>;
gpio-line-names =
"SEC_FPGA_THERM_OVERT_L-I",
"SEC_FPGA_READY_BMC-I",
@@ -949,6 +996,7 @@ exp3: gpio@74 {
#interrupt-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&standby_power_regulator>;
gpio-line-names =
"IOB_PRSNT_L",
"IOB_DP_HPD",
@@ -1014,6 +1062,7 @@ i2c-mux@77 {
#size-cells = <0>;
reg = <0x77>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
e1si2c0: i2c@0 {
#address-cells = <1>;
@@ -1054,6 +1103,7 @@ i2c-mux@77 {
#size-cells = <0>;
reg = <0x77>;
i2c-mux-idle-disconnect;
+ vdd-supply = <&standby_power_regulator>;
e1si2c4: i2c@0 {
#address-cells = <1>;
@@ -1100,7 +1150,7 @@ &gpio0 {
/*J0-J7*/ "", "", "", "", "", "", "", "",
/*K0-K7*/ "", "", "", "", "", "", "", "",
/*L0-L7*/ "", "", "", "", "", "", "", "",
- /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "HMC_RESET_L-O", "STBY_POWER_EN-O",
+ /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
/*N0-N7*/ "", "", "", "", "", "", "", "",
/*O0-O7*/ "", "", "", "", "", "", "", "",
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index 65b2208..9f2ad55 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -63,7 +63,7 @@ sys_err {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
index 31ff19e..6c8b966 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -165,7 +165,7 @@ fan4 {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
index 1a7c617..ce6d30d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -77,10 +77,9 @@ attention {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2500-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
- no-gpio-delays;
memory-region = <&coldfire_memory>;
aspeed,sram = <&sram>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
index 123da82..7953059 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -55,7 +55,7 @@ identify {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2400-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
@@ -151,7 +151,7 @@ eeprom@50 {
};
rtc@68 {
- compatible = "dallas,ds3231";
+ compatible = "maxim,ds3231";
reg = <0x68>;
};
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
index e6b383f..a0263d9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -68,10 +68,9 @@ power {
};
fsi: gpio-fsi {
- compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2500-cf-fsi-master";
#address-cells = <2>;
#size-cells = <0>;
- no-gpio-delays;
memory-region = <&coldfire_memory>;
aspeed,sram = <&sram>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index 8b1e82c..89907b6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -173,7 +173,7 @@ power-button {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 6ac7b0a..af3a9d3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -64,7 +64,7 @@ event-checkstop {
linux,code = <ASPEED_GPIO(F, 7)>;
};
- event-pcie-e2b-present{
+ event-pcie-e2b-present {
label = "pcie-e2b-present";
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 7)>;
@@ -96,7 +96,7 @@ hdd_fault {
};
fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
+ compatible = "fsi-master-gpio";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
index fd361cf..8645122 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -509,7 +509,7 @@ U197_PCA9546_CH1: i2c@1 {
reg = <1>;
cpu0_pvccin@60 {
- compatible = "isil,raa229004";
+ compatible = "renesas,raa229004";
reg = <0x60>;
};
@@ -530,7 +530,7 @@ U197_PCA9546_CH2: i2c@2 {
reg = <2>;
cpu1_pvccin@72 {
- compatible = "isil,raa229004";
+ compatible = "renesas,raa229004";
reg = <0x72>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
index 16815ee..8c953e3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -30,7 +30,7 @@ video_engine_memory: jpegbuffer {
reusable;
};
- ramoops@9eff0000{
+ ramoops@9eff0000 {
compatible = "ramoops";
reg = <0x9eff0000 0x10000>;
record-size = <0x2000>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 78c9678..c3d4d91 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -356,7 +356,6 @@ vuart: serial@1e787000 {
lpc: lpc@1e789000 {
compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
- reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 57a699a..39500bd 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -273,7 +273,6 @@ hace: crypto@1e6e3000 {
gfx: display@1e6e6000 {
compatible = "aspeed,ast2500-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
- reg-io-width = <4>;
clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
resets = <&syscon ASPEED_RESET_CRT1>;
syscon = <&syscon>;
@@ -441,7 +440,6 @@ vuart: serial@1e787000 {
lpc: lpc@1e789000 {
compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
- reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
index 289668f..e87c4b5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -412,6 +412,16 @@ pinctrl_mdio4_default: mdio4_default {
groups = "MDIO4";
};
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+
pinctrl_ncts1_default: ncts1_default {
function = "NCTS1";
groups = "NCTS1";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 8ed715bd..f8662c8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -382,7 +382,6 @@ rng: hwrng@1e6e2524 {
gfx: display@1e6e6000 {
compatible = "aspeed,ast2600-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
- reg-io-width = <4>;
clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
resets = <&syscon ASPEED_RESET_GRAPHICS>;
syscon = <&syscon>;
@@ -572,7 +571,6 @@ peci0: peci-controller@1e78b000 {
lpc: lpc@1e789000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
- reg-io-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
@@ -662,7 +660,7 @@ sdc: sdc@1e740000 {
status = "disabled";
sdhci0: sdhci@1e740100 {
- compatible = "aspeed,ast2600-sdhci", "sdhci";
+ compatible = "aspeed,ast2600-sdhci";
reg = <0x100 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
sdhci,auto-cmd12;
@@ -671,7 +669,7 @@ sdhci0: sdhci@1e740100 {
};
sdhci1: sdhci@1e740200 {
- compatible = "aspeed,ast2600-sdhci", "sdhci";
+ compatible = "aspeed,ast2600-sdhci";
reg = <0x200 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
sdhci,auto-cmd12;
@@ -847,7 +845,7 @@ i2c: bus@1e78a000 {
fsim0: fsi@1e79b000 {
#interrupt-cells = <1>;
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2600-fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -859,7 +857,7 @@ fsim0: fsi@1e79b000 {
fsim1: fsi@1e79b100 {
#interrupt-cells = <1>;
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+ compatible = "aspeed,ast2600-fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 00e5887..0ef225a 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -31,9 +31,13 @@ spi_gpio: spi {
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+ /*
+ * chipselect pins are defined in platform .dts files
+ * separately.
+ */
+ sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
@@ -152,18 +156,6 @@ &vhub {
status = "okay";
};
-&emmc_controller {
- status = "okay";
-};
-
-&emmc {
- status = "okay";
-
- non-removable;
- max-frequency = <25000000>;
- bus-width = <4>;
-};
-
&rtc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 0000000..efd9223
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * u-boot partition: 896KB.
+ */
+ u-boot@0 {
+ reg = <0x0 0xe0000>;
+ label = "u-boot";
+ };
+
+ /*
+ * u-boot environment variables: 64KB.
+ */
+ u-boot-env@e0000 {
+ reg = <0xe0000 0x10000>;
+ label = "env";
+ };
+
+ /*
+ * image metadata partition (64KB), used by Facebook internal
+ * tools.
+ */
+ image-meta@f0000 {
+ reg = <0xf0000 0x10000>;
+ label = "meta";
+ };
+
+ /*
+ * FIT image: 63 MB.
+ */
+ fit@100000 {
+ reg = <0x100000 0x3f00000>;
+ label = "fit";
+ };
+
+ /*
+ * "data0" partition (64MB) is used by Facebook BMC platforms as
+ * persistent data store.
+ */
+ data0@4000000 {
+ reg = <0x4000000 0x4000000>;
+ label = "data0";
+ };
+
+ /*
+ * Although the master partition can be created by enabling
+ * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+ * explicitly created to avoid breaking legacy applications.
+ */
+ flash0@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash0";
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index 07ce3b2..06fac23 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -82,6 +82,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam0_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -98,6 +99,7 @@ eeprom@0 {
};
cfam0_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -114,8 +116,8 @@ eeprom@0 {
};
cfam0_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -131,8 +133,8 @@ eeprom@0 {
};
cfam0_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -249,6 +251,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam1_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -265,6 +268,7 @@ eeprom@0 {
};
cfam1_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -281,8 +285,8 @@ eeprom@0 {
};
cfam1_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -298,8 +302,8 @@ eeprom@0 {
};
cfam1_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
index 57494c7..9501f66 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -733,6 +733,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam2_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -749,6 +750,7 @@ eeprom@0 {
};
cfam2_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -765,8 +767,8 @@ eeprom@0 {
};
cfam2_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -782,8 +784,8 @@ eeprom@0 {
};
cfam2_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -1106,6 +1108,7 @@ fsi2spi@1c00 {
#size-cells = <0>;
cfam3_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1122,6 +1125,7 @@ eeprom@0 {
};
cfam3_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1138,8 +1142,8 @@ eeprom@0 {
};
cfam3_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
reg = <0x40>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -1155,8 +1159,8 @@ eeprom@0 {
};
cfam3_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
reg = <0x60>;
- compatible = "ibm,fsi2spi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
index 71062ff9..2552e11 100644
--- a/arch/arm/boot/dts/broadcom/Makefile
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -51,6 +51,7 @@
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
+ bcm4708-buffalo-wxr-1750dhp.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
bcm4708-buffalo-wzr-1166dhp.dtb \
bcm4708-buffalo-wzr-1166dhp2.dtb \
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
new file mode 100644
index 0000000..f5c95c9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Taishi Shimizu <s.taishi14142@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
+ model = "Buffalo WXR-1750DHP";
+
+ memory@0 {
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x08000000>;
+ device_type = "memory";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-aoss {
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ /* GPIO 3 is a switch button with AUTO / MANUAL. */
+ button-manual {
+ gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+ label = "MANUAL";
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ button-restart {
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ };
+
+ /* GPIO 8 and 9 are a tri-state switch button with
+ * ROUTER / AP / WB.
+ */
+ button-router {
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ label = "ROUTER";
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ };
+
+ button-wb {
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ label = "WB";
+ linux,code = <BTN_2>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-internet {
+ color = <LED_COLOR_ID_WHITE>;
+ function = "internet";
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-power0 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-power1 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-router0 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = "router";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-router1 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = "router";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-usb {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_USB;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
+ };
+ };
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ label = "wan";
+ };
+
+ port@1 {
+ label = "lan4";
+ };
+
+ port@2 {
+ label = "lan3";
+ };
+
+ port@3 {
+ label = "lan2";
+ };
+
+ port@4 {
+ label = "lan1";
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
index adc7424..0b15cca 100644
--- a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -46,8 +46,8 @@ timing0: timing-320x240 {
i2c: i2c {
compatible = "i2c-gpio";
- gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
- <&portd 5 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>;
i2c-gpio,scl-output-only;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile
index ab8525f..cb30d8d 100644
--- a/arch/arm/boot/dts/intel/ixp/Makefile
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -1,5 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_IXP4XX) += \
+ intel-ixp42x-actiontec-mi424wr-ac.dtb \
+ intel-ixp42x-actiontec-mi424wr-d.dtb \
intel-ixp42x-linksys-nslu2.dtb \
intel-ixp42x-linksys-wrv54g.dtb \
intel-ixp42x-freecom-fsg-3.dtb \
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
new file mode 100644
index 0000000..413b925
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+ model = "Actiontec MI424WR rev A/C";
+ compatible = "actiontec,mi424wr-ac", "intel,ixp42x";
+
+ soc {
+ /* EthB used for WAN */
+ ethernet@c8009000 {
+ phy-handle = <&phy17>; // 17 on revision A-C
+
+ mdio {
+ phy17: ethernet-phy@17 {
+ /* WAN */
+ reg = <17>;
+ };
+ };
+ };
+
+ /* EthC used for LAN */
+ ethernet@c800a000 {
+ /* Fixed link to the CPU MII port on the KS8995 */
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
new file mode 100644
index 0000000..3619c64
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision D
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+ model = "Actiontec MI424WR rev D";
+ compatible = "actiontec,mi424wr-d", "intel,ixp42x";
+
+ soc {
+ /* EthB used for LAN */
+ ethernet@c8009000 {
+ /* Fixed link to the CPU MII port on the KS8995 */
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio {
+ /* PHY ID 0x00221450 */
+ phy5: ethernet-phy@5 {
+ /* WAN */
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC used for WAN */
+ ethernet@c800a000 {
+ phy-handle = <&phy5>; // 5 on revision D
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
new file mode 100644
index 0000000..76fd97c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart1:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-wan-coax {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "wan-coax";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-power-alarm {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_ALARM;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-power {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-wireless {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led-internet-down {
+ color = <LED_COLOR_ID_RED>;
+ function = "internet-down";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-internet-up {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "internet-up";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-lan-coax {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "lan-coax";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-wan-ethernet-alarm {
+ color = <LED_COLOR_ID_RED>;
+ function = "wan-ethernet-alarm";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ /* The last three LEDs are not mounted but traces exist on the PCB */
+ led-phone-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "phone-1";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led-phone-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "phone-2";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led-voip {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "voip";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ reg = <0>;
+ label = "lan1";
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-mode = "mii";
+ phy-handle = <&phy2>;
+ };
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "mii";
+ phy-handle = <&phy3>;
+ };
+ ethernet-port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-mode = "mii";
+ phy-handle = <&phy4>;
+ };
+ ethernet-port@4 {
+ reg = <4>;
+ ethernet = <ðc>;
+ phy-mode = "mii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ };
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 8 MB of Flash in 64 0x20000 sized blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x0800000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ fis-index-block = <0x3f>;
+ };
+ };
+ gpio1: gpio@1,0 {
+ /* MMIO GPIO at CS1 */
+ compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ big-endian;
+ reg = <1 0x00000000 0x2>;
+ reg-names = "dat";
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ pci-reset-hog {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCI reset";
+ };
+ pstn-relay-hog-1 {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "PSTN relay control 1";
+ };
+ pstn-relay-hog-2 {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "PSTN relay control 2";
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 13 */
+ <0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */
+ <0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */
+ /* IDSEL 14 */
+ <0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+ <0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */
+ /* IDSEL 15 */
+ <0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */
+ <0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */
+ };
+
+ ethb: ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "mii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 1, 2, 3 and 4 are ports on the KS8995 switch */
+ phy1: ethernet-phy@1 {
+ /* LAN1 */
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ /* LAN2 */
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ /* LAN3 */
+ reg = <3>;
+ };
+ phy4: ethernet-phy@4 {
+ /* LAN4 */
+ reg = <4>;
+ };
+ };
+ };
+
+ ethc: ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "mii";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
index d086437..927c272 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -11,6 +11,8 @@
#include "sama7d65-pinfunc.h"
#include "sama7d65.dtsi"
#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/at91.h>
/ {
@@ -26,6 +28,43 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+ button {
+ label = "PB_USER";
+ gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROG1>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+ led0: led-red {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+ };
+
+ led1: led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+ };
+
+ led2: led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
@@ -346,12 +385,24 @@ pinctrl_gmac0_txck_default: gmac0-txck-default {
bias-pull-up;
};
- pinctrl_i2c10_default: i2c10-default{
+ pinctrl_i2c10_default: i2c10-default {
pinmux = <PIN_PB19__FLEXCOM10_IO1>,
<PIN_PB20__FLEXCOM10_IO0>;
bias-pull-up;
};
+ pinctrl_key_gpio_default: key-gpio-default {
+ pinmux = <PIN_PC10__GPIO>;
+ bias-pull-up;
+ };
+
+ pinctrl_led_gpio_default: led-gpio-default {
+ pinmux = <PIN_PB15__GPIO>,
+ <PIN_PB17__GPIO>,
+ <PIN_PA21__GPIO>;
+ bias-pull-up;
+ };
+
pinctrl_sdmmc1_default: sdmmc1-default {
cmd-data {
pinmux = <PIN_PB22__SDMMC1_CMD>,
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
index 66c07e6..46dacbb 100644
--- a/arch/arm/boot/dts/microchip/sam9x7.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -271,6 +271,27 @@ AT91_XDMAC_DT_PERID(38))>,
status = "disabled";
};
+ qspi: spi@f0014000 {
+ compatible = "microchip,sam9x7-ospi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf0014000 0x100>, <0x60000000 0x20000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(26))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(27))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 35>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_PLLADIV2>;
+ status = "disabled";
+ };
+
i2s: i2s@f001c000 {
compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
reg = <0xf001c000 0x100>;
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index c191acc..e53e2dd 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -91,7 +91,7 @@ secumod: security-module@e0004000 {
};
sfrbu: sfr@e0008000 {
- compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+ compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
reg = <0xe0008000 0x20>;
};
@@ -506,6 +506,21 @@ flx3: flexcom@e182c000 {
#size-cells = <1>;
status = "disabled";
+ uart3: serial@200 {
+ compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+ clock-names = "usart";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+ <&dma0 AT91_XDMAC_DT_PERID(11)>;
+ dma-names = "tx", "rx";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ status = "disabled";
+ };
+
i2c3: i2c@600 {
compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index 791090f..98c3577 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -134,7 +134,7 @@ mc: memory-controller@f0824000 {
status = "disabled";
};
- gmac0: eth@f0802000 {
+ gmac0: ethernet@f0802000 {
device_type = "network";
compatible = "snps,dwmac";
reg = <0xf0802000 0x2000>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
index f42ad25..65fe3a1 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -44,7 +44,7 @@ timer@3fe600 {
};
ahb {
- gmac1: eth@f0804000 {
+ gmac1: ethernet@f0804000 {
device_type = "network";
compatible = "snps,dwmac";
reg = <0xf0804000 0x2000>;
diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile
index 7c1d3cb..2ed2d92 100644
--- a/arch/arm/boot/dts/nvidia/Makefile
+++ b/arch/arm/boot/dts/nvidia/Makefile
@@ -14,6 +14,7 @@
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-acer-a500-picasso.dtb \
+ tegra20-asus-sl101.dtb \
tegra20-asus-tf101.dtb \
tegra20-harmony.dtb \
tegra20-colibri-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
index 4caf2073..a2a50f9 100644
--- a/arch/arm/boot/dts/nvidia/tegra114.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/memory/tegra114-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/nvidia,tegra114-car.h>
#include <dt-bindings/soc/tegra-pmc.h>
/ {
@@ -693,6 +694,29 @@ mipi: mipi@700e3000 {
#nvidia,mipi-calibrate-cells = <1>;
};
+ dfll: clock@70110000 {
+ compatible = "nvidia,tegra114-dfll";
+ reg = <0x70110000 0x100>, /* DFLL control */
+ <0x70110000 0x100>, /* I2C output control */
+ <0x70110100 0x100>, /* Integrated I2C controller */
+ <0x70110200 0x100>; /* Look-up table RAM */
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_DFLL_SOC>,
+ <&tegra_car TEGRA114_CLK_DFLL_REF>,
+ <&tegra_car TEGRA114_CLK_I2C5>;
+ clock-names = "soc", "ref", "i2c";
+ resets = <&tegra_car TEGRA114_RST_DFLL_DVCO>;
+ reset-names = "dvco";
+ #clock-cells = <0>;
+ clock-output-names = "dfllCPU_out";
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,cf = <10>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+ status = "disabled";
+ };
+
mmc@78000000 {
compatible = "nvidia,tegra114-sdhci";
reg = <0x78000000 0x200>;
@@ -824,6 +848,15 @@ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
+
+ clocks = <&tegra_car TEGRA114_CLK_CCLK_G>,
+ <&tegra_car TEGRA114_CLK_CCLK_LP>,
+ <&tegra_car TEGRA114_CLK_PLL_X>,
+ <&tegra_car TEGRA114_CLK_PLL_P>,
+ <&dfll>;
+ clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+ /* FIXME: what's the actual transition time? */
+ clock-latency = <300000>;
};
cpu1: cpu@1 {
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
new file mode 100644
index 0000000..8828129
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer-common.dtsi"
+
+/ {
+ model = "ASUS Eee Pad Slider SL101";
+ compatible = "asus,sl101", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ magnetometer@e {
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+ };
+
+ /* Atmel MXT1386 Touchscreen */
+ touchscreen@5a {
+ compatible = "atmel,maxtouch";
+ reg = <0x5a>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+ vdda-supply = <&vdd_3v3_sys>;
+ vdd-supply = <&vdd_3v3_sys>;
+
+ atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+ };
+
+ gyroscope@68 {
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+
+ i2c-gate {
+ accelerometer@f {
+ mount-matrix = "1", "0", "0",
+ "0", "-1", "0",
+ "0", "0", "1";
+ };
+ };
+ };
+ };
+
+ extcon-keys {
+ compatible = "gpio-keys";
+
+ switch-tablet-mode {
+ label = "Tablet Mode";
+ gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_TABLET_MODE>;
+ debounce-interval = <500>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
index 67764af..0d93820 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
@@ -1,542 +1,19 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
-#include <dt-bindings/input/atmel-maxtouch.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-#include "tegra20.dtsi"
-#include "tegra20-cpu-opp.dtsi"
-#include "tegra20-cpu-opp-microvolt.dtsi"
+#include "tegra20-asus-transformer-common.dtsi"
/ {
- model = "ASUS EeePad Transformer TF101";
+ model = "ASUS Eee Pad Transformer TF101";
compatible = "asus,tf101", "nvidia,tegra20";
- chassis-type = "convertible";
-
- aliases {
- mmc0 = &sdmmc4; /* eMMC */
- mmc1 = &sdmmc3; /* MicroSD */
- mmc2 = &sdmmc1; /* WiFi */
-
- rtc0 = &pmic;
- rtc1 = "/rtc@7000e000";
-
- serial0 = &uartd;
- serial1 = &uartc; /* Bluetooth */
- serial2 = &uartb; /* GPS */
- };
-
- /*
- * The decompressor and also some bootloaders rely on a
- * pre-existing /chosen node to be available to insert the
- * command line and merge other ATAGS info.
- */
- chosen {};
-
- memory@0 {
- reg = <0x00000000 0x40000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- ramoops@2ffe0000 {
- compatible = "ramoops";
- reg = <0x2ffe0000 0x10000>; /* 64kB */
- console-size = <0x8000>; /* 32kB */
- record-size = <0x400>; /* 1kB */
- ecc-size = <16>;
- };
-
- linux,cma@30000000 {
- compatible = "shared-dma-pool";
- alloc-ranges = <0x30000000 0x10000000>;
- size = <0x10000000>; /* 256MiB */
- linux,cma-default;
- reusable;
- };
- };
-
- host1x@50000000 {
- dc@54200000 {
- rgb {
- status = "okay";
-
- port {
- lcd_output: endpoint {
- remote-endpoint = <&lvds_encoder_input>;
- bus-width = <18>;
- };
- };
- };
- };
-
- hdmi@54280000 {
- status = "okay";
-
- vdd-supply = <&hdmi_vdd_reg>;
- pll-supply = <&hdmi_pll_reg>;
- hdmi-supply = <&vdd_hdmi_en>;
-
- nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
- GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio@6000d000 {
- charging-enable-hog {
- gpio-hog;
- gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
- output-low;
- };
- };
-
- pinmux@70000014 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ata {
- nvidia,pins = "ata";
- nvidia,function = "ide";
- };
-
- atb {
- nvidia,pins = "atb", "gma", "gme";
- nvidia,function = "sdio4";
- };
-
- atc {
- nvidia,pins = "atc";
- nvidia,function = "nand";
- };
-
- atd {
- nvidia,pins = "atd", "ate", "gmb", "spia",
- "spib", "spic";
- nvidia,function = "gmi";
- };
-
- cdev1 {
- nvidia,pins = "cdev1";
- nvidia,function = "plla_out";
- };
-
- cdev2 {
- nvidia,pins = "cdev2";
- nvidia,function = "pllp_out4";
- };
-
- crtp {
- nvidia,pins = "crtp";
- nvidia,function = "crt";
- };
-
- lm1 {
- nvidia,pins = "lm1";
- nvidia,function = "rsvd3";
- };
-
- csus {
- nvidia,pins = "csus";
- nvidia,function = "vi_sensor_clk";
- };
-
- dap1 {
- nvidia,pins = "dap1";
- nvidia,function = "dap1";
- };
-
- dap2 {
- nvidia,pins = "dap2";
- nvidia,function = "dap2";
- };
-
- dap3 {
- nvidia,pins = "dap3";
- nvidia,function = "dap3";
- };
-
- dap4 {
- nvidia,pins = "dap4";
- nvidia,function = "dap4";
- };
-
- dta {
- nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
- nvidia,function = "vi";
- };
-
- dtf {
- nvidia,pins = "dtf";
- nvidia,function = "i2c3";
- };
-
- gmc {
- nvidia,pins = "gmc";
- nvidia,function = "uartd";
- };
-
- gmd {
- nvidia,pins = "gmd";
- nvidia,function = "sflash";
- };
-
- gpu {
- nvidia,pins = "gpu";
- nvidia,function = "pwm";
- };
-
- gpu7 {
- nvidia,pins = "gpu7";
- nvidia,function = "rtck";
- };
-
- gpv {
- nvidia,pins = "gpv", "slxa";
- nvidia,function = "pcie";
- };
-
- hdint {
- nvidia,pins = "hdint";
- nvidia,function = "hdmi";
- };
-
- i2cp {
- nvidia,pins = "i2cp";
- nvidia,function = "i2cp";
- };
-
- irrx {
- nvidia,pins = "irrx", "irtx";
- nvidia,function = "uartb";
- };
-
- kbca {
- nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
- "kbce", "kbcf";
- nvidia,function = "kbc";
- };
-
- lcsn {
- nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
- "lsdi", "lvp0";
- nvidia,function = "rsvd4";
- };
-
- ld0 {
- nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
- "ld5", "ld6", "ld7", "ld8", "ld9",
- "ld10", "ld11", "ld12", "ld13", "ld14",
- "ld15", "ld16", "ld17", "ldi", "lhp0",
- "lhp1", "lhp2", "lhs", "lpp", "lpw0",
- "lpw2", "lsc0", "lsc1", "lsck", "lsda",
- "lspi", "lvp1", "lvs";
- nvidia,function = "displaya";
- };
-
- owc {
- nvidia,pins = "owc", "spdi", "spdo", "uac";
- nvidia,function = "rsvd2";
- };
-
- pmc {
- nvidia,pins = "pmc";
- nvidia,function = "pwr_on";
- };
-
- rm {
- nvidia,pins = "rm";
- nvidia,function = "i2c1";
- };
-
- sdb {
- nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
- nvidia,function = "sdio3";
- };
-
- sdio1 {
- nvidia,pins = "sdio1";
- nvidia,function = "sdio1";
- };
-
- slxd {
- nvidia,pins = "slxd";
- nvidia,function = "spdif";
- };
-
- spid {
- nvidia,pins = "spid", "spie", "spif";
- nvidia,function = "spi1";
- };
-
- spig {
- nvidia,pins = "spig", "spih";
- nvidia,function = "spi2_alt";
- };
-
- uaa {
- nvidia,pins = "uaa", "uab", "uda";
- nvidia,function = "ulpi";
- };
-
- uad {
- nvidia,pins = "uad";
- nvidia,function = "irda";
- };
-
- uca {
- nvidia,pins = "uca", "ucb";
- nvidia,function = "uartc";
- };
-
- conf_ata {
- nvidia,pins = "ata", "atb", "atc", "atd",
- "cdev1", "cdev2", "dap1", "dap4",
- "dte", "ddc", "dtf", "gma", "gmc",
- "gme", "gpu", "gpu7", "gpv", "i2cp",
- "irrx", "irtx", "pta", "rm", "sdc",
- "sdd", "slxc", "slxd", "slxk", "spdi",
- "spdo", "uac", "uad",
- "uda", "csus";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
-
- conf_ate {
- nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
- "owc", "spia", "spib", "spic",
- "spid", "spie", "spig", "slxa";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
-
- conf_ck32 {
- nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
- "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- };
-
- conf_crtp {
- nvidia,pins = "crtp", "spih";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
-
- conf_dta {
- nvidia,pins = "dta", "dtb", "dtc", "dtd";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
-
- conf_spif {
- nvidia,pins = "spif";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
-
- conf_hdint {
- nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
- "lpw1", "lsck", "lsda", "lsdi", "lvp0";
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
-
- conf_kbca {
- nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
- "kbce", "kbcf", "sdio1", "uaa", "uab",
- "uca", "ucb";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
-
- conf_lc {
- nvidia,pins = "lc", "ls";
- nvidia,pull = <TEGRA_PIN_PULL_UP>;
- };
-
- conf_ld0 {
- nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
- "ld5", "ld6", "ld7", "ld8", "ld9",
- "ld10", "ld11", "ld12", "ld13", "ld14",
- "ld15", "ld16", "ld17", "ldi", "lhp0",
- "lhp1", "lhp2", "lhs", "lm0", "lpp",
- "lpw0", "lpw2", "lsc0", "lsc1", "lspi",
- "lvp1", "lvs", "pmc", "sdb";
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
-
- conf_ld17_0 {
- nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
- "ld23_22";
- nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
- };
-
- drive_sdio1 {
- nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
- nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
- nvidia,schmitt = <TEGRA_PIN_ENABLE>;
- nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
- nvidia,pull-down-strength = <31>;
- nvidia,pull-up-strength = <31>;
- nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
- nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
- };
-
- drive_csus {
- nvidia,pins = "drive_csus";
- nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
- nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
- nvidia,pull-down-strength = <31>;
- nvidia,pull-up-strength = <31>;
- nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
- nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
- };
- };
-
- state_i2cmux_ddc: pinmux-i2cmux-ddc {
- ddc {
- nvidia,pins = "ddc";
- nvidia,function = "i2c2";
- };
-
- pta {
- nvidia,pins = "pta";
- nvidia,function = "rsvd4";
- };
- };
-
- state_i2cmux_idle: pinmux-i2cmux-idle {
- ddc {
- nvidia,pins = "ddc";
- nvidia,function = "rsvd4";
- };
-
- pta {
- nvidia,pins = "pta";
- nvidia,function = "rsvd4";
- };
- };
-
- state_i2cmux_pta: pinmux-i2cmux-pta {
- ddc {
- nvidia,pins = "ddc";
- nvidia,function = "rsvd4";
- };
-
- pta {
- nvidia,pins = "pta";
- nvidia,function = "i2c2";
- };
- };
- };
-
- spdif@70002400 {
- status = "okay";
-
- nvidia,fixed-parent-rate;
- };
-
- i2s@70002800 {
- status = "okay";
-
- nvidia,fixed-parent-rate;
- };
-
- serial@70006040 {
- compatible = "nvidia,tegra20-hsuart";
- reset-names = "serial";
- /delete-property/ reg-shift;
- /* GPS BCM4751 */
- };
-
- serial@70006200 {
- compatible = "nvidia,tegra20-hsuart";
- reset-names = "serial";
- /delete-property/ reg-shift;
- status = "okay";
-
- /* Azurewave AW-NH615 BCM4329B1 */
- bluetooth {
- compatible = "brcm,bcm4329-bt";
-
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "host-wakeup";
-
- /* PLLP 216MHz / 16 / 4 */
- max-speed = <3375000>;
-
- clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
- clock-names = "txco";
-
- vbat-supply = <&vdd_3v3_sys>;
- vddio-supply = <&vdd_1v8_sys>;
-
- device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
- };
- };
-
- serial@70006300 {
- /delete-property/ dmas;
- /delete-property/ dma-names;
- status = "okay";
- };
-
- pwm@7000a000 {
- status = "okay";
- };
i2c@7000c000 {
- status = "okay";
- clock-frequency = <400000>;
-
- /* Aichi AMI306 digital compass */
magnetometer@e {
- compatible = "asahi-kasei,ak8974";
- reg = <0xe>;
-
- avdd-supply = <&vdd_3v3_sys>;
- dvdd-supply = <&vdd_1v8_sys>;
-
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
- wm8903: audio-codec@1a {
- compatible = "wlf,wm8903";
- reg = <0x1a>;
-
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- micdet-cfg = <0x83>;
- micdet-delay = <100>;
-
- gpio-cfg = <
- 0x00000600 /* DMIC_LR, output */
- 0x00000680 /* DMIC_DAT, input */
- 0x00000000 /* Speaker-enable GPIO, output, low */
- 0xffffffff /* don't touch */
- 0xffffffff /* don't touch */
- >;
-
- AVDD-supply = <&vdd_1v8_sys>;
- CPVDD-supply = <&vdd_1v8_sys>;
- DBVDD-supply = <&vdd_1v8_sys>;
- DCVDD-supply = <&vdd_1v8_sys>;
- };
-
/* Atmel MXT1386 Touchscreen */
touchscreen@5b {
compatible = "atmel,maxtouch";
@@ -554,33 +31,12 @@ touchscreen@5b {
};
gyroscope@68 {
- compatible = "invensense,mpu3050";
- reg = <0x68>;
-
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
-
- vdd-supply = <&vdd_3v3_sys>;
- vlogic-supply = <&vdd_1v8_sys>;
-
mount-matrix = "0", "1", "0",
"-1", "0", "0",
"0", "0", "1";
i2c-gate {
- #address-cells = <1>;
- #size-cells = <0>;
-
accelerometer@f {
- compatible = "kionix,kxtf9";
- reg = <0xf>;
-
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
-
- vdd-supply = <&vdd_1v8_sys>;
- vddio-supply = <&vdd_1v8_sys>;
-
mount-matrix = "-1", "0", "0",
"0", "-1", "0",
"0", "0", "-1";
@@ -589,461 +45,9 @@ accelerometer@f {
};
};
- i2c2: i2c@7000c400 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@7000c500 {
- status = "okay";
- clock-frequency = <400000>;
- };
-
- i2c@7000d000 {
- status = "okay";
- clock-frequency = <400000>;
-
- pmic: pmic@34 {
- compatible = "ti,tps6586x";
- reg = <0x34>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
- ti,system-power-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
- sys-supply = <&vdd_5v0_sys>;
- vin-sm0-supply = <&sys_reg>;
- vin-sm1-supply = <&sys_reg>;
- vin-sm2-supply = <&sys_reg>;
- vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&sm2_reg>;
- vinldo4-supply = <&sm2_reg>;
- vinldo678-supply = <&sm2_reg>;
- vinldo9-supply = <&sm2_reg>;
-
- regulators {
- sys_reg: sys {
- regulator-name = "vdd_sys";
- regulator-always-on;
- };
-
- vdd_core: sm0 {
- regulator-name = "vdd_sm0,vdd_core";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
- regulator-coupled-max-spread = <170000 550000>;
- regulator-always-on;
- regulator-boot-on;
-
- nvidia,tegra-core-regulator;
- };
-
- vdd_cpu: sm1 {
- regulator-name = "vdd_sm1,vdd_cpu";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1125000>;
- regulator-coupled-with = <&vdd_core &rtc_vdd>;
- regulator-coupled-max-spread = <550000 550000>;
- regulator-always-on;
- regulator-boot-on;
-
- nvidia,tegra-cpu-regulator;
- };
-
- sm2_reg: sm2 {
- regulator-name = "vdd_sm2,vin_ldo*";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
- };
-
- /* LDO0 is not connected to anything */
-
- ldo1 {
- regulator-name = "vdd_ldo1,avdd_pll*";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- rtc_vdd: ldo2 {
- regulator-name = "vdd_ldo2,vdd_rtc";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-coupled-with = <&vdd_core &vdd_cpu>;
- regulator-coupled-max-spread = <170000 550000>;
- regulator-always-on;
- regulator-boot-on;
-
- nvidia,tegra-rtc-regulator;
- };
-
- ldo3 {
- regulator-name = "vdd_ldo3,avdd_usb*";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo4 {
- regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcore_emmc: ldo5 {
- regulator-name = "vdd_ldo5,vcore_mmc";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
-
- ldo6 {
- regulator-name = "vdd_ldo6,avdd_vdac";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- hdmi_vdd_reg: ldo7 {
- regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- hdmi_pll_reg: ldo8 {
- regulator-name = "vdd_ldo8,avdd_hdmi_pll";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo9 {
- regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
-
- ldo_rtc {
- regulator-name = "vdd_rtc_out,vdd_cell";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
-
- nct1008: temperature-sensor@4c {
- compatible = "onnn,nct1008";
- reg = <0x4c>;
- vcc-supply = <&vdd_3v3_sys>;
-
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
-
- #thermal-sensor-cells = <1>;
- };
- };
-
- pmc@7000e400 {
- nvidia,invert-interrupt;
- nvidia,suspend-mode = <1>;
- nvidia,cpu-pwr-good-time = <2000>;
- nvidia,cpu-pwr-off-time = <100>;
- nvidia,core-pwr-good-time = <3845 3845>;
- nvidia,core-pwr-off-time = <458>;
- nvidia,sys-clock-req-active-high;
- core-supply = <&vdd_core>;
- };
-
- memory-controller@7000f400 {
- nvidia,use-ram-code;
-
- emc-tables@3 {
- reg = <0x3>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- emc-table@25000 {
- reg = <25000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <25000>;
- nvidia,emc-registers = <0x00000002 0x00000006
- 0x00000003 0x00000003 0x00000006 0x00000004
- 0x00000002 0x00000009 0x00000003 0x00000003
- 0x00000002 0x00000002 0x00000002 0x00000004
- 0x00000003 0x00000008 0x0000000b 0x0000004d
- 0x00000000 0x00000003 0x00000003 0x00000003
- 0x00000008 0x00000001 0x0000000a 0x00000004
- 0x00000003 0x00000008 0x00000004 0x00000006
- 0x00000002 0x00000068 0x00000000 0x00000003
- 0x00000000 0x00000000 0x00000282 0xa0ae04ae
- 0x00070000 0x00000000 0x00000000 0x00000003
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
-
- emc-table@50000 {
- reg = <50000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <50000>;
- nvidia,emc-registers = <0x00000003 0x00000007
- 0x00000003 0x00000003 0x00000006 0x00000004
- 0x00000002 0x00000009 0x00000003 0x00000003
- 0x00000002 0x00000002 0x00000002 0x00000005
- 0x00000003 0x00000008 0x0000000b 0x0000009f
- 0x00000000 0x00000003 0x00000003 0x00000003
- 0x00000008 0x00000001 0x0000000a 0x00000007
- 0x00000003 0x00000008 0x00000004 0x00000006
- 0x00000002 0x000000d0 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000282 0xa0ae04ae
- 0x00070000 0x00000000 0x00000000 0x00000005
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
-
- emc-table@75000 {
- reg = <75000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <75000>;
- nvidia,emc-registers = <0x00000005 0x0000000a
- 0x00000004 0x00000003 0x00000006 0x00000004
- 0x00000002 0x00000009 0x00000003 0x00000003
- 0x00000002 0x00000002 0x00000002 0x00000005
- 0x00000003 0x00000008 0x0000000b 0x000000ff
- 0x00000000 0x00000003 0x00000003 0x00000003
- 0x00000008 0x00000001 0x0000000a 0x0000000b
- 0x00000003 0x00000008 0x00000004 0x00000006
- 0x00000002 0x00000138 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000282 0xa0ae04ae
- 0x00070000 0x00000000 0x00000000 0x00000007
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
-
- emc-table@150000 {
- reg = <150000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <150000>;
- nvidia,emc-registers = <0x00000009 0x00000014
- 0x00000007 0x00000003 0x00000006 0x00000004
- 0x00000002 0x00000009 0x00000003 0x00000003
- 0x00000002 0x00000002 0x00000002 0x00000005
- 0x00000003 0x00000008 0x0000000b 0x0000021f
- 0x00000000 0x00000003 0x00000003 0x00000003
- 0x00000008 0x00000001 0x0000000a 0x00000015
- 0x00000003 0x00000008 0x00000004 0x00000006
- 0x00000002 0x00000270 0x00000000 0x00000001
- 0x00000000 0x00000000 0x00000282 0xa07c04ae
- 0x007dc010 0x00000000 0x00000000 0x0000000e
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
-
- emc-table@300000 {
- reg = <300000>;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = <300000>;
- nvidia,emc-registers = <0x00000012 0x00000027
- 0x0000000d 0x00000006 0x00000007 0x00000005
- 0x00000003 0x00000009 0x00000006 0x00000006
- 0x00000003 0x00000003 0x00000002 0x00000006
- 0x00000003 0x00000009 0x0000000c 0x0000045f
- 0x00000000 0x00000004 0x00000004 0x00000006
- 0x00000008 0x00000001 0x0000000e 0x0000002a
- 0x00000003 0x0000000f 0x00000007 0x00000005
- 0x00000002 0x000004e0 0x00000005 0x00000002
- 0x00000000 0x00000000 0x00000282 0xe059048b
- 0x007e0010 0x00000000 0x00000000 0x0000001b
- 0x00000000 0x00000000 0x00000000 0x00000000>;
- };
-
- lpddr2 {
- compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
- revision-id = <1 0>;
- density = <2048>;
- io-width = <16>;
- };
- };
- };
-
- /* Peripheral USB via ASUS connector */
- usb@c5000000 {
- compatible = "nvidia,tegra20-udc";
- status = "okay";
- dr_mode = "peripheral";
- };
-
- usb-phy@c5000000 {
- status = "okay";
- dr_mode = "peripheral";
- nvidia,xcvr-setup-use-fuses;
- nvidia,xcvr-lsfslew = <2>;
- nvidia,xcvr-lsrslew = <2>;
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- /* Dock's USB port */
- usb@c5008000 {
- status = "okay";
- };
-
- usb-phy@c5008000 {
- status = "okay";
- nvidia,xcvr-setup-use-fuses;
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- sdmmc1: mmc@c8000000 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
- assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
- assigned-clock-rates = <40000000>;
-
- max-frequency = <40000000>;
- keep-power-in-suspend;
- bus-width = <4>;
- non-removable;
-
- mmc-pwrseq = <&brcm_wifi_pwrseq>;
- vmmc-supply = <&vdd_3v3_sys>;
- vqmmc-supply = <&vdd_3v3_sys>;
-
- /* Azurewave AW-NH615 BCM4329B1 */
- wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
-
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- };
- };
-
- sdmmc3: mmc@c8000400 {
- status = "okay";
- bus-width = <4>;
- cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
- power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
- vmmc-supply = <&vdd_3v3_sys>;
- vqmmc-supply = <&vdd_3v3_sys>;
- };
-
- sdmmc4: mmc@c8000600 {
- status = "okay";
- bus-width = <8>;
- vmmc-supply = <&vcore_emmc>;
- vqmmc-supply = <&vdd_3v3_sys>;
- non-removable;
- };
-
- mains: ac-adapter-detect {
- compatible = "gpio-charger";
- charger-type = "mains";
- gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
-
- enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
- power-supply = <&vdd_3v3_sys>;
- pwms = <&pwm 2 4000000>;
-
- brightness-levels = <7 255>;
- num-interpolated-steps = <248>;
- default-brightness-level = <20>;
- };
-
- /* PMIC has a built-in 32KHz oscillator which is used by PMC */
- clk32k_in: clock-32k-in {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- #clock-cells = <0>;
- };
-
- cpus {
- cpu0: cpu@0 {
- cpu-supply = <&vdd_cpu>;
- operating-points-v2 = <&cpu0_opp_table>;
- #cooling-cells = <2>;
- };
-
- cpu1: cpu@1 {
- cpu-supply = <&vdd_cpu>;
- operating-points-v2 = <&cpu0_opp_table>;
- #cooling-cells = <2>;
- };
- };
-
- display-panel {
- compatible = "auo,b101ew05", "panel-lvds";
-
- /* AUO B101EW05 using custom timings */
-
- backlight = <&backlight>;
- ddc-i2c-bus = <&lvds_ddc>;
- power-supply = <&vdd_pnl_reg>;
-
- width-mm = <218>;
- height-mm = <135>;
-
- data-mapping = "jeida-18";
-
- panel-timing {
- clock-frequency = <71200000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <8>;
- hback-porch = <18>;
- hsync-len = <184>;
- vsync-len = <3>;
- vfront-porch = <4>;
- vback-porch = <8>;
- };
-
- port {
- panel_input: endpoint {
- remote-endpoint = <&lvds_encoder_output>;
- };
- };
- };
-
- gpio-keys {
+ extcon-keys {
compatible = "gpio-keys";
- key-power {
- label = "Power";
- gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- debounce-interval = <10>;
- wakeup-event-action = <EV_ACT_ASSERTED>;
- wakeup-source;
- };
-
- key-volume-down {
- label = "Volume Down";
- gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <10>;
- wakeup-event-action = <EV_ACT_ASSERTED>;
- wakeup-source;
- };
-
- key-volume-up {
- label = "Volume Up";
- gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <10>;
- wakeup-event-action = <EV_ACT_ASSERTED>;
- wakeup-source;
- };
-
switch-dock-hall-sensor {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
@@ -1054,253 +58,4 @@ switch-dock-hall-sensor {
wakeup-source;
};
};
-
- i2cmux {
- compatible = "i2c-mux-pinctrl";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-parent = <&i2c2>;
-
- pinctrl-names = "ddc", "pta", "idle";
- pinctrl-0 = <&state_i2cmux_ddc>;
- pinctrl-1 = <&state_i2cmux_pta>;
- pinctrl-2 = <&state_i2cmux_idle>;
-
- hdmi_ddc: i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- lvds_ddc: i2c@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- smart-battery@b {
- compatible = "ti,bq20z75", "sbs,sbs-battery";
- reg = <0xb>;
- sbs,i2c-retry-count = <2>;
- sbs,poll-retry-count = <10>;
- power-supplies = <&mains>;
- };
-
- /* Dynaimage ambient light sensor */
- light-sensor@1c {
- compatible = "dynaimage,al3000a";
- reg = <0x1c>;
-
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
-
- vdd-supply = <&vdd_1v8_sys>;
- };
- };
- };
-
- lvds-encoder {
- compatible = "ti,sn75lvds83", "lvds-encoder";
-
- powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
- power-supply = <&vdd_3v3_sys>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- lvds_encoder_input: endpoint {
- remote-endpoint = <&lcd_output>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lvds_encoder_output: endpoint {
- remote-endpoint = <&panel_input>;
- };
- };
- };
- };
-
- opp-table-emc {
- /delete-node/ opp-666000000;
- /delete-node/ opp-760000000;
- };
-
- vdd_5v0_sys: regulator-5v0 {
- compatible = "regulator-fixed";
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vdd_3v3_sys: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vdd_3v3_vs";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- regulator-pcie {
- compatible = "regulator-fixed";
- regulator-name = "pcie_vdd";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
- regulator-always-on;
- };
-
- vdd_pnl_reg: regulator-panel {
- compatible = "regulator-fixed";
- regulator-name = "vdd_pnl";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vdd_1v8_sys: regulator-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vdd_1v8_vs";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_hdmi_en: regulator-hdmi {
- compatible = "regulator-fixed";
- regulator-name = "vdd_5v0_hdmi_en";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vdd_5v0_sys>;
- gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- sound {
- compatible = "asus,tegra-audio-wm8903-tf101",
- "nvidia,tegra-audio-wm8903";
- nvidia,model = "Asus EeePad Transformer WM8903";
-
- nvidia,audio-routing =
- "Headphone Jack", "HPOUTR",
- "Headphone Jack", "HPOUTL",
- "Int Spk", "ROP",
- "Int Spk", "RON",
- "Int Spk", "LOP",
- "Int Spk", "LON",
- "IN2L", "Mic Jack",
- "DMICDAT", "Int Mic";
-
- nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,audio-codec = <&wm8903>;
-
- nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
- nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
- nvidia,coupled-mic-hp-det;
-
- clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
- <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA20_CLK_CDEV1>;
- clock-names = "pll_a", "pll_a_out0", "mclk";
- };
-
- thermal-zones {
- /*
- * NCT1008 has two sensors:
- *
- * 0: internal that monitors ambient/skin temperature
- * 1: external that is connected to the CPU's diode
- *
- * Ideally we should use userspace thermal governor,
- * but it's a much more complex solution. The "skin"
- * zone is a simpler solution which prevents TF101 from
- * getting too hot from a user's tactile perspective.
- * The CPU zone is intended to protect silicon from damage.
- */
-
- skin-thermal {
- polling-delay-passive = <1000>; /* milliseconds */
- polling-delay = <5000>; /* milliseconds */
-
- thermal-sensors = <&nct1008 0>;
-
- trips {
- trip0: skin-alert {
- /* start throttling at 60C */
- temperature = <60000>;
- hysteresis = <200>;
- type = "passive";
- };
-
- trip1: skin-crit {
- /* shut down at 70C */
- temperature = <70000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&trip0>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- cpu-thermal {
- polling-delay-passive = <1000>; /* milliseconds */
- polling-delay = <5000>; /* milliseconds */
-
- thermal-sensors = <&nct1008 1>;
-
- trips {
- trip2: cpu-alert {
- /* throttle at 85C until temperature drops to 84.8C */
- temperature = <85000>;
- hysteresis = <200>;
- type = "passive";
- };
-
- trip3: cpu-crit {
- /* shut down at 90C */
- temperature = <90000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <&trip2>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- brcm_wifi_pwrseq: wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
-
- clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
- clock-names = "ext_clock";
-
- reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
- post-power-on-delay-ms = <200>;
- power-off-delay-us = <200>;
- };
};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
new file mode 100644
index 0000000..b48f53c
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
@@ -0,0 +1,1268 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+ chassis-type = "convertible";
+
+ aliases {
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* MicroSD */
+ mmc2 = &sdmmc1; /* WiFi */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ serial0 = &uartd;
+ serial1 = &uartc; /* Bluetooth */
+ serial2 = &uartb; /* GPS */
+ };
+
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ */
+ chosen {};
+
+ memory@0 {
+ reg = <0x00000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@2ffe0000 {
+ compatible = "ramoops";
+ reg = <0x2ffe0000 0x10000>; /* 64kB */
+ console-size = <0x8000>; /* 32kB */
+ record-size = <0x400>; /* 1kB */
+ ecc-size = <16>;
+ };
+
+ linux,cma@30000000 {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0x30000000 0x10000000>;
+ size = <0x10000000>; /* 256MiB */
+ linux,cma-default;
+ reusable;
+ };
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+
+ port {
+ lcd_output: endpoint {
+ remote-endpoint = <&lvds_encoder_input>;
+ bus-width = <18>;
+ };
+ };
+ };
+ };
+
+ hdmi@54280000 {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+ hdmi-supply = <&vdd_hdmi_en>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio@6000d000 {
+ charging-enable-hog {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+
+ pinmux@70000014 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata";
+ nvidia,function = "ide";
+ };
+
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ };
+
+ atc {
+ nvidia,pins = "atc";
+ nvidia,function = "nand";
+ };
+
+ atd {
+ nvidia,pins = "atd", "ate", "gmb", "spia",
+ "spib", "spic";
+ nvidia,function = "gmi";
+ };
+
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ };
+
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+
+ lm1 {
+ nvidia,pins = "lm1";
+ nvidia,function = "rsvd3";
+ };
+
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+
+ dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+ nvidia,function = "vi";
+ };
+
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+
+ gmc {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ };
+
+ gmd {
+ nvidia,pins = "gmd";
+ nvidia,function = "sflash";
+ };
+
+ gpu {
+ nvidia,pins = "gpu";
+ nvidia,function = "pwm";
+ };
+
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+
+ gpv {
+ nvidia,pins = "gpv", "slxa";
+ nvidia,function = "pcie";
+ };
+
+ hdint {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ };
+
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uartb";
+ };
+
+ kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+
+ lcsn {
+ nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+ "lsdi", "lvp0";
+ nvidia,function = "rsvd4";
+ };
+
+ ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lpp", "lpw0",
+ "lpw2", "lsc0", "lsc1", "lsck", "lsda",
+ "lspi", "lvp1", "lvs";
+ nvidia,function = "displaya";
+ };
+
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
+
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+ nvidia,function = "sdio3";
+ };
+
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+
+ slxd {
+ nvidia,pins = "slxd";
+ nvidia,function = "spdif";
+ };
+
+ spid {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
+ };
+
+ spig {
+ nvidia,pins = "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+
+ uaa {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
+ };
+
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+
+ conf-ata {
+ nvidia,pins = "ata", "atb", "atc", "atd",
+ "cdev1", "cdev2", "dap1", "dap4",
+ "dte", "ddc", "dtf", "gma", "gmc",
+ "gme", "gpu", "gpu7", "gpv", "i2cp",
+ "irrx", "irtx", "pta", "rm", "sdc",
+ "sdd", "slxc", "slxd", "slxk", "spdi",
+ "spdo", "uac", "uad",
+ "uda", "csus";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf-ate {
+ nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+ "owc", "spia", "spib", "spic",
+ "spid", "spie", "spig", "slxa";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf-ck32 {
+ nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+ "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+
+ conf-crtp {
+ nvidia,pins = "crtp", "spih";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf-dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf-spif {
+ nvidia,pins = "spif";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf-hdint {
+ nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+ "lpw1", "lsck", "lsda", "lsdi", "lvp0";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf-kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf", "sdio1", "uaa", "uab",
+ "uca", "ucb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf-lc {
+ nvidia,pins = "lc", "ls";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ };
+
+ conf-ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lm0", "lpp",
+ "lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+ "lvp1", "lvs", "pmc", "sdb";
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf-ld17-0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ };
+
+ drive-sdio1 {
+ nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+
+ drive-csus {
+ nvidia,pins = "drive_csus";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+ };
+
+ state_i2cmux_ddc: pinmux-i2cmux-ddc {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_idle: pinmux-i2cmux-idle {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_pta: pinmux-i2cmux-pta {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+ };
+ };
+
+ spdif@70002400 {
+ status = "okay";
+
+ nvidia,fixed-parent-rate;
+ };
+
+ i2s@70002800 {
+ status = "okay";
+
+ nvidia,fixed-parent-rate;
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra20-hsuart";
+ reset-names = "serial";
+ /delete-property/ reg-shift;
+ /* GPS BCM4751 */
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra20-hsuart";
+ reset-names = "serial";
+ /delete-property/ reg-shift;
+ status = "okay";
+
+ /* Azurewave AW-NH615 BCM4329B1 */
+ bluetooth {
+ compatible = "brcm,bcm4329-bt";
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
+ /* PLLP 216MHz / 16 / 4 */
+ max-speed = <3375000>;
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+ clock-names = "txco";
+
+ vbat-supply = <&vdd_3v3_sys>;
+ vddio-supply = <&vdd_1v8_sys>;
+
+ device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ serial@70006300 {
+ /delete-property/ dmas;
+ /delete-property/ dma-names;
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Aichi AMI306 digital compass */
+ magnetometer@e {
+ compatible = "asahi-kasei,ak8974";
+ reg = <0xe>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+ avdd-supply = <&vdd_3v3_sys>;
+ dvdd-supply = <&vdd_1v8_sys>;
+ };
+
+ wm8903: audio-codec@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0x83>;
+ micdet-delay = <100>;
+
+ gpio-cfg = <
+ 0x00000600 /* DMIC_LR, output */
+ 0x00000680 /* DMIC_DAT, input */
+ 0x00000000 /* Speaker-enable GPIO, output, low */
+ 0xffffffff /* don't touch */
+ 0xffffffff /* don't touch */
+ >;
+
+ AVDD-supply = <&vdd_1v8_sys>;
+ CPVDD-supply = <&vdd_1v8_sys>;
+ DBVDD-supply = <&vdd_1v8_sys>;
+ DCVDD-supply = <&vdd_1v8_sys>;
+ };
+
+ gyroscope@68 {
+ compatible = "invensense,mpu3050";
+ reg = <0x68>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vdd_3v3_sys>;
+ vlogic-supply = <&vdd_1v8_sys>;
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@f {
+ compatible = "kionix,kxtf9";
+ reg = <0xf>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vdd_1v8_sys>;
+ vddio-supply = <&vdd_1v8_sys>;
+ };
+ };
+ };
+ };
+
+ i2c2: i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: pmic@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_sys>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ sys_reg: sys {
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ vdd_core: sm0 {
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+ regulator-coupled-max-spread = <170000 550000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ nvidia,tegra-core-regulator;
+ };
+
+ vdd_cpu: sm1 {
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-coupled-with = <&vdd_core &rtc_vdd>;
+ regulator-coupled-max-spread = <550000 550000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ nvidia,tegra-cpu-regulator;
+ };
+
+ sm2_reg: sm2 {
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ ldo1 {
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ rtc_vdd: ldo2 {
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-coupled-with = <&vdd_core &vdd_cpu>;
+ regulator-coupled-max-spread = <170000 550000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ nvidia,tegra-rtc-regulator;
+ };
+
+ ldo3 {
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo4 {
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcore_emmc: ldo5 {
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo6 {
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ hdmi_vdd_reg: ldo7 {
+ regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ hdmi_pll_reg: ldo8 {
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9 {
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo_rtc {
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ nct1008: temperature-sensor@4c {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vcc-supply = <&vdd_3v3_sys>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <100>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <458>;
+ nvidia,sys-clock-req-active-high;
+ core-supply = <&vdd_core>;
+ };
+
+ memory-controller@7000f400 {
+ nvidia,use-ram-code;
+
+ emc-tables@3 {
+ reg = <0x3>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ emc-table@25000 {
+ reg = <25000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <25000>;
+ nvidia,emc-registers = <0x00000002 0x00000006
+ 0x00000003 0x00000003 0x00000006 0x00000004
+ 0x00000002 0x00000009 0x00000003 0x00000003
+ 0x00000002 0x00000002 0x00000002 0x00000004
+ 0x00000003 0x00000008 0x0000000b 0x0000004d
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000008 0x00000001 0x0000000a 0x00000004
+ 0x00000003 0x00000008 0x00000004 0x00000006
+ 0x00000002 0x00000068 0x00000000 0x00000003
+ 0x00000000 0x00000000 0x00000282 0xa0ae04ae
+ 0x00070000 0x00000000 0x00000000 0x00000003
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+
+ emc-table@50000 {
+ reg = <50000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <50000>;
+ nvidia,emc-registers = <0x00000003 0x00000007
+ 0x00000003 0x00000003 0x00000006 0x00000004
+ 0x00000002 0x00000009 0x00000003 0x00000003
+ 0x00000002 0x00000002 0x00000002 0x00000005
+ 0x00000003 0x00000008 0x0000000b 0x0000009f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000008 0x00000001 0x0000000a 0x00000007
+ 0x00000003 0x00000008 0x00000004 0x00000006
+ 0x00000002 0x000000d0 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000282 0xa0ae04ae
+ 0x00070000 0x00000000 0x00000000 0x00000005
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+
+ emc-table@75000 {
+ reg = <75000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <75000>;
+ nvidia,emc-registers = <0x00000005 0x0000000a
+ 0x00000004 0x00000003 0x00000006 0x00000004
+ 0x00000002 0x00000009 0x00000003 0x00000003
+ 0x00000002 0x00000002 0x00000002 0x00000005
+ 0x00000003 0x00000008 0x0000000b 0x000000ff
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000008 0x00000001 0x0000000a 0x0000000b
+ 0x00000003 0x00000008 0x00000004 0x00000006
+ 0x00000002 0x00000138 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000282 0xa0ae04ae
+ 0x00070000 0x00000000 0x00000000 0x00000007
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+
+ emc-table@150000 {
+ reg = <150000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <150000>;
+ nvidia,emc-registers = <0x00000009 0x00000014
+ 0x00000007 0x00000003 0x00000006 0x00000004
+ 0x00000002 0x00000009 0x00000003 0x00000003
+ 0x00000002 0x00000002 0x00000002 0x00000005
+ 0x00000003 0x00000008 0x0000000b 0x0000021f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000008 0x00000001 0x0000000a 0x00000015
+ 0x00000003 0x00000008 0x00000004 0x00000006
+ 0x00000002 0x00000270 0x00000000 0x00000001
+ 0x00000000 0x00000000 0x00000282 0xa07c04ae
+ 0x007dc010 0x00000000 0x00000000 0x0000000e
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+
+ emc-table@300000 {
+ reg = <300000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <300000>;
+ nvidia,emc-registers = <0x00000012 0x00000027
+ 0x0000000d 0x00000006 0x00000007 0x00000005
+ 0x00000003 0x00000009 0x00000006 0x00000006
+ 0x00000003 0x00000003 0x00000002 0x00000006
+ 0x00000003 0x00000009 0x0000000c 0x0000045f
+ 0x00000000 0x00000004 0x00000004 0x00000006
+ 0x00000008 0x00000001 0x0000000e 0x0000002a
+ 0x00000003 0x0000000f 0x00000007 0x00000005
+ 0x00000002 0x000004e0 0x00000005 0x00000002
+ 0x00000000 0x00000000 0x00000282 0xe059048b
+ 0x007e0010 0x00000000 0x00000000 0x0000001b
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+
+ lpddr2 {
+ compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+ revision-id = <1 0>;
+ density = <2048>;
+ io-width = <16>;
+ };
+ };
+ };
+
+ /* Peripheral USB via ASUS connector */
+ usb@c5000000 {
+ compatible = "nvidia,tegra20-udc";
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ nvidia,xcvr-setup-use-fuses;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ /* Dock's USB port */
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ usb-phy@c5008000 {
+ status = "okay";
+ nvidia,xcvr-setup-use-fuses;
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ sdmmc1: mmc@c8000000 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+ assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+ assigned-clock-rates = <40000000>;
+
+ max-frequency = <40000000>;
+ keep-power-in-suspend;
+ bus-width = <4>;
+ non-removable;
+
+ mmc-pwrseq = <&brcm_wifi_pwrseq>;
+ vmmc-supply = <&vdd_3v3_sys>;
+ vqmmc-supply = <&vdd_3v3_sys>;
+
+ /* Azurewave AW-NH615 BCM4329B1 */
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+ };
+
+ sdmmc3: mmc@c8000400 {
+ status = "okay";
+ bus-width = <4>;
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&vdd_3v3_sys>;
+ vqmmc-supply = <&vdd_3v3_sys>;
+ };
+
+ sdmmc4: mmc@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_3v3_sys>;
+ non-removable;
+ };
+
+ mains: ac-adapter-detect {
+ compatible = "gpio-charger";
+ charger-type = "mains";
+ gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_3v3_sys>;
+ pwms = <&pwm 2 4000000>;
+
+ brightness-levels = <7 255>;
+ num-interpolated-steps = <248>;
+ default-brightness-level = <20>;
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k-in {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
+ cpus {
+ cpu0: cpu@0 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ display-panel {
+ compatible = "auo,b101ew05", "panel-lvds";
+
+ /* AUO B101EW05 using custom timings */
+
+ backlight = <&backlight>;
+ ddc-i2c-bus = <&lvds_ddc>;
+ power-supply = <&vdd_pnl_reg>;
+
+ width-mm = <218>;
+ height-mm = <135>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ clock-frequency = <71200000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <8>;
+ hback-porch = <18>;
+ hsync-len = <184>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ vback-porch = <8>;
+ };
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&lvds_encoder_output>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c2>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ hdmi_ddc: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ lvds_ddc: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smart-battery@b {
+ compatible = "ti,bq20z75", "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ power-supplies = <&mains>;
+ };
+
+ /* Dynaimage ambient light sensor */
+ light-sensor@1c {
+ compatible = "dynaimage,al3000a";
+ reg = <0x1c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+ vdd-supply = <&vdd_1v8_sys>;
+ };
+ };
+ };
+
+ lvds-encoder {
+ compatible = "ti,sn75lvds83", "lvds-encoder";
+
+ powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+ power-supply = <&vdd_3v3_sys>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_encoder_input: endpoint {
+ remote-endpoint = <&lcd_output>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_encoder_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };
+
+ opp-table-emc {
+ /delete-node/ opp-666000000;
+ /delete-node/ opp-760000000;
+ };
+
+ vdd_5v0_sys: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_sys: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_vs";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie_vdd";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ };
+
+ vdd_pnl_reg: regulator-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_1v8_sys: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_vs";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_hdmi_en: regulator-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_hdmi_en";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vdd_5v0_sys>;
+ gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "asus,tegra-audio-wm8903-tf101",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Asus EeePad Transformer WM8903";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "IN2L", "Mic Jack",
+ "DMICDAT", "Int Mic";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+ nvidia,coupled-mic-hp-det;
+
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
+
+ thermal-zones {
+ /*
+ * NCT1008 has two sensors:
+ *
+ * 0: internal that monitors ambient/skin temperature
+ * 1: external that is connected to the CPU's diode
+ *
+ * Ideally we should use userspace thermal governor,
+ * but it's a much more complex solution. The "skin"
+ * zone is a simpler solution which prevents TF101 from
+ * getting too hot from a user's tactile perspective.
+ * The CPU zone is intended to protect silicon from damage.
+ */
+
+ skin-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct1008 0>;
+
+ trips {
+ trip0: skin-alert {
+ /* start throttling at 60C */
+ temperature = <60000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: skin-crit {
+ /* shut down at 70C */
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct1008 1>;
+
+ trips {
+ trip2: cpu-alert {
+ /* throttle at 85C until temperature drops to 84.8C */
+ temperature = <85000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip3: cpu-crit {
+ /* shut down at 90C */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&trip2>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ brcm_wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+ clock-names = "ext_clock";
+
+ reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ power-off-delay-us = <200>;
+ };
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
index 2f7754f..c6ef0a20 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
@@ -108,8 +108,8 @@ sub-mic-ldo {
i2c@7000c400 {
touchscreen@20 {
rmi4-f11@11 {
- syna,clip-x-high = <1110>;
- syna,clip-y-high = <1973>;
+ syna,clip-x-high = <1440>;
+ syna,clip-y-high = <2560>;
touchscreen-inverted-y;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
index ef54652..0064b54 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
@@ -26,7 +26,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pcf8563@51 {
+ rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
index 0a150c9..244740d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
@@ -26,7 +26,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pcf8563@51 {
+ rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
index ebbd4d9..543cf72 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
@@ -42,14 +42,14 @@ leds {
led-bus {
label = "bus";
gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "off";
};
led-error {
label = "error";
gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "off";
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
index df543b4..89b1750 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
@@ -47,7 +47,7 @@ touchscreen@41 {
interrupt-parent = <&gpio7>;
irq-trigger = <0x1>;
- stmpe_touchscreen {
+ touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
index 4989e8d..9bb36db 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
@@ -25,7 +25,7 @@ clock_ksz8081: clock-ksz8081 {
clock-output-names = "enet_ref_pad";
};
- i2c2-mux {
+ i2c-mux-2 {
compatible = "i2c-mux";
i2c-parent = <&i2c2>;
mux-controls = <&i2c_mux>;
@@ -45,7 +45,7 @@ i2c@2 {
};
};
- i2c4-mux {
+ i2c-mux-4 {
compatible = "i2c-mux";
i2c-parent = <&i2c4>;
mux-controls = <&i2c_mux>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
index c9b2ea2..fc62ba2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* support for the imx6 based aristainetos2 board
*
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
index 5e15212..a7400d4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* support for the imx6 based aristainetos2 board
*
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
index 0b1275a..2160b71 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
@@ -557,7 +557,6 @@ &uart5 {
&usbh1 {
vbus-supply = <®_h1_vbus>;
- pinctrl-names = "default";
phy_type = "utmi";
dr_mode = "host";
disable-over-current;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
index de80ca1..7a3b963 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
@@ -157,7 +157,7 @@ &i2c3 {
sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- rtc: m41t62@68 {
+ rtc: rtc@68 {
compatible = "st,m41t62";
reg = <0x68>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
index e9ac476..55b7e91 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
@@ -389,8 +389,6 @@ &usdhc4 {
};
&iomuxc {
- pinctrl-names = "default";
-
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
index d774725..53013b1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -222,6 +222,8 @@ pmic@58 {
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio7>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index aa1adcc..e1d0c6e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@ &ecspi5 {
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
- m25_eeprom: flash@0 {
+ m25_eeprom: eeprom@0 {
compatible = "atmel,at25";
spi-max-frequency = <10000000>;
size = <0x8000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
index 16658b7..0597502 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
index 4ab31f22..4e448b4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
index c5525b2..17fabff 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
@@ -266,7 +266,7 @@ temp2: ad7414@4d {
reg = <0x4d>;
};
- rtc: m41t62@68 {
+ rtc: rtc@68 {
compatible = "st,m41t62";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
index d2d0a82..484a6089 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@ &ecspi5 {
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
- m25_eeprom: flash@0 {
+ m25_eeprom: eeprom@0 {
compatible = "atmel,at25256B", "atmel,at25";
spi-max-frequency = <20000000>;
size = <0x8000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
index c5c1448..bf8fde9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
@@ -184,7 +184,7 @@ gpio: pca9555@23 {
#gpio-cells = <2>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
index 46e011a..4c8ea43 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
@@ -171,7 +171,7 @@ eeprom: eeprom@51 {
reg = <0x51>;
};
- rtc: pcf8523@68 {
+ rtc: rtc@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
index c425d42..d6deb8c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
@@ -69,14 +69,14 @@ leds {
led-green {
label = "led1";
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "off";
};
led-red {
label = "led0";
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "off";
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index bba8212..ef5c0ed 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -292,8 +292,6 @@ flash@0,0 {
};
&iomuxc {
- pinctrl-names = "default";
-
pinctrl_backlight: dispgrp {
fsl,pins = <
/* BLEN_OUT */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
index 8c3a9ea..24fc3ff 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
@@ -265,7 +265,7 @@ accel: mma8452@1c {
reg = <0x1c>;
};
- rtc: pcf8523@68 {
+ rtc: rtc@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
@@ -288,7 +288,7 @@ touch: stmpe811@44 {
vio-supply = <®_3p3v>;
vcc-supply = <®_3p3v>;
- stmpe_touchscreen {
+ touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index b13000a..5fcd7cd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -648,7 +648,7 @@ stmpe811@41 {
/* ADC conversion time: 80 clocks */
st,sample-time = <4>;
- stmpe_ts: stmpe_touchscreen {
+ stmpe_ts: touchscreen {
compatible = "st,stmpe-ts";
/* 8 sample average control */
st,ave-ctrl = <3>;
@@ -665,7 +665,7 @@ stmpe_ts: stmpe_touchscreen {
st,touch-det-delay = <5>;
};
- stmpe_adc: stmpe_adc {
+ stmpe_adc: adc {
compatible = "st,stmpe-adc";
#io-channel-cells = <1>;
/* forbid to use ADC channels 3-0 (touch) */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
index 7cc7ae1..01d4ea2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* support for the imx6 based aristainetos2 board
*
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
@@ -150,6 +114,8 @@ pmic@58 {
reg = <0x58>;
interrupt-parent = <&gpio1>;
interrupts = <04 0x8>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
regulators {
bcore1 {
@@ -324,8 +290,9 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- ethphy: ethernet-phy {
+ ethphy: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
txd0-skew-ps = <0>;
txd1-skew-ps = <0>;
txd2-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 3525cbc..419d85b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -572,7 +572,7 @@ stmpe811@41 {
/* ADC converstion time: 80 clocks */
st,sample-time = <4>;
- stmpe_ts: stmpe_touchscreen {
+ stmpe_ts: touchscreen {
compatible = "st,stmpe-ts";
/* 8 sample average control */
st,ave-ctrl = <3>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
index 41d073f..c504cf7e9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -118,7 +118,7 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpio_key>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
label = "Button 0";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index 97763db3..9f4e746 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -33,7 +33,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emcon_wake>;
- wake {
+ key-wake {
label = "Wake";
linux,code = <KEY_WAKEUP>;
gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
@@ -225,6 +225,8 @@ da9063: pmic@58 {
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
index e75e1a5..beff5a0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
@@ -24,13 +24,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -156,6 +156,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
@@ -270,7 +271,7 @@ eeprom4: eeprom@53 {
pagesize = <16>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
index b57f407..9d3ba40 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -33,13 +33,13 @@ backlight {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -230,6 +230,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
@@ -350,7 +351,7 @@ eeprom4: eeprom@53 {
pagesize = <16>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
index 090c005..7e84e0a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -33,13 +33,13 @@ backlight {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -223,6 +223,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
@@ -349,7 +350,7 @@ eeprom4: eeprom@53 {
pagesize = <16>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
index 94f1d1a..81394d4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -34,13 +34,13 @@ backlight {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -54,21 +54,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -376,7 +376,7 @@ eeprom4: eeprom@53 {
pagesize = <16>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
index 009a9d5..6136a95 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
@@ -26,13 +26,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -46,21 +46,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -179,6 +179,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
@@ -287,7 +288,7 @@ eeprom4: eeprom@53 {
pagesize = <16>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
index 77ae611..9c822ca 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
@@ -25,13 +25,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -146,6 +146,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
@@ -260,7 +261,7 @@ eeprom4: eeprom@53 {
pagesize = <16>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
index e3b6773..552114a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
@@ -24,13 +24,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -142,6 +142,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
@@ -256,7 +257,7 @@ eeprom4: eeprom@53 {
pagesize = <16>;
};
- rtc: ds1672@68 {
+ rtc: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
index ce1d49a..ea92b2b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
@@ -50,13 +50,13 @@ backlight-keypad {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -70,21 +70,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -254,6 +254,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
index 50b4849..b518bcb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
@@ -34,13 +34,13 @@ backlight {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -54,21 +54,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -195,6 +195,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
index 3125cd0..3df4d34 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -36,13 +36,13 @@ backlight {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -56,21 +56,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -260,6 +260,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
index 955a512..87fdc9e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
@@ -24,13 +24,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -156,6 +156,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
@@ -270,7 +271,7 @@ eeprom@53 {
pagesize = <16>;
};
- ds1672@68 {
+ rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
index 453dee4..099ed2f9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
@@ -27,13 +27,13 @@ memory@10000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -47,21 +47,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -165,6 +165,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
index add700b..cbca5e58 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
@@ -25,13 +25,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
index 82f47c2..4e4dce5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
@@ -24,13 +24,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
- switch-hold {
+ key-switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
@@ -141,6 +141,7 @@ gsc: gsc@20 {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
index 54d4bce..6b73736 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -332,7 +332,6 @@ &pwm1 {
};
&pwm2 {
- pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
index 8ee65f9..8d47145 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -57,13 +57,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- home {
+ key-home {
label = "Home";
gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
linux,code = <102>;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
linux,code = <158>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
index 43d474bb..c727aac 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -86,45 +86,45 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
- i2c2mux {
+ i2c-mux-2 {
compatible = "i2c-mux-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2mux>;
@@ -148,7 +148,7 @@ i2c2mux@2 {
};
};
- i2c3mux {
+ i2c-mux-3 {
compatible = "i2c-mux-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3mux>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 8e64314..806af7f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -47,38 +47,38 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
index 8a0bfc3..c71aa74 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -80,38 +80,38 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
index 037b601..fc78acc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -13,14 +13,14 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpio_keys>;
status = "disabled";
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
wakeup-source;
};
- sleep {
+ key-sleep {
label = "Sleep Button";
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_SLEEP>;
@@ -35,19 +35,19 @@ user_leds: user-leds {
user-led1 {
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "on";
};
user-led2 {
gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "on";
};
user-led3 {
gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "on";
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index 0b4c09b0..a3c2811 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -162,7 +162,7 @@ stmpe: touchctrl@44 {
interrupts = <12 IRQ_TYPE_NONE>;
status = "disabled";
- stmpe_touchscreen {
+ touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
index 64ded5e..22d5918 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
@@ -23,7 +23,6 @@ reg_3p3v: regulator-3p3v {
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -33,7 +32,6 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
reg_usb_otg_vbus: regulator-otg-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index 2587d17..b9dde0a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -32,35 +32,35 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- home {
+ key-home {
label = "Home";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
wakeup-source;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
wakeup-source;
};
- program {
+ key-program {
label = "Program";
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROGRAM>;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
index bdef7e6..f7abc17 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -108,38 +108,38 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index 960e83f..e8368c6b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -71,21 +71,21 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_POWER>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
wakeup-source;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
index 6823a63..2daf2b6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
@@ -58,7 +58,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
label = "Power Button";
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
index 11c7043..17f6a56 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
@@ -213,12 +213,12 @@ &i2c1 {
status = "okay";
m41t00s: rtc@68 {
- compatible = "m41t00";
+ compatible = "st,m41t00";
reg = <0x68>;
};
isl12022: rtc@6f {
- compatible = "isl,isl12022";
+ compatible = "isil,isl12022";
reg = <0x6f>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
index 2bb5b76..57297d6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
@@ -44,7 +44,7 @@ mclk: clock {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
index 96e4f4b..de2b12d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
@@ -429,7 +429,6 @@ &uart5 {
};
&usbh1 {
- pinctrl-names = "default";
phy_type = "utmi";
dr_mode = "host";
disable-over-current;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 56040da..b6c336e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -84,7 +84,7 @@ led-0 {
led-1 {
label = "tolinoshine2hd:white:backlightboost";
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "off";
+ linux,default-trigger = "none";
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 8c5ca4f..704870e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -309,7 +309,7 @@ uart3: serial@2034000 {
reg = <0x02034000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
- dma-name = "rx", "tx";
+ dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
<&clks IMX6SLL_CLK_UART3_SERIAL>;
clock-names = "ipg", "per";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 67cf09e..c7aeb99 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -33,14 +33,14 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 911ccbd..73c9cfb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -22,6 +22,26 @@ backlight_display: backlight-display {
status = "okay";
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_2v8: regulator-2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-fixed";
@@ -182,6 +202,9 @@ camera@3c {
clock-names = "xclk";
powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <®_2v8>;
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
port {
ov5640_to_parallel: endpoint {
@@ -421,8 +444,6 @@ &wdog1 {
};
&iomuxc {
- pinctrl-names = "default";
-
pinctrl_camera_clock: cameraclockgrp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
index ec04264..c6064f4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -61,7 +61,7 @@ stmpe: touchscreen@44 {
wakeup-source;
status = "disabled";
- stmpe_touchscreen {
+ touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
index 2f3fd32..113485e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -8,12 +8,12 @@
/ {
gpio_keys: gpio-keys {
- compatible = "gpio-key";
+ compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
status = "disabled";
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
@@ -29,13 +29,13 @@ user_leds: user-leds {
user-led1 {
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "on";
};
user-led2 {
gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "gpio";
+ linux,default-trigger = "none";
default-state = "on";
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index fe307f4..9fa52259 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -76,6 +76,7 @@ reg_brcm: regulator-brcm {
panel {
compatible = "vxt,vl050-8048nt-c01";
backlight = <&backlight>;
+ power-supply = <®_3p3v>;
port {
panel_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
index f053358..1992dfb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
@@ -72,7 +72,7 @@ backlight: backlight {
default-brightness-level = <50>;
};
- i2c_gpio: i2c-gpio {
+ i2c_gpio: i2c {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
@@ -246,7 +246,6 @@ &fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
phy-mode = "rmii";
- phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
phy-supply = <®_3v3_etn>;
phy-handle = <&etnphy0>;
status = "okay";
@@ -262,6 +261,11 @@ etnphy0: ethernet-phy@0 {
pinctrl-0 = <&pinctrl_etnphy0_int>;
interrupt-parent = <&gpio5>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <100>;
+ reset-deassert-us = <25000>;
+ /* Energy detect sometimes causes link failures */
+ smsc,disable-energy-detect;
status = "okay";
};
@@ -272,6 +276,9 @@ etnphy1: ethernet-phy@2 {
pinctrl-0 = <&pinctrl_etnphy1_int>;
interrupt-parent = <&gpio4>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <100>;
+ reset-deassert-us = <25000>;
status = "okay";
};
};
@@ -281,7 +288,6 @@ &fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
phy-mode = "rmii";
- phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
phy-supply = <®_3v3_etn>;
phy-handle = <&etnphy1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
index de4dc7c..e75dad0f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
@@ -13,7 +13,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
- power {
+ key-power {
label = "Wake-Up";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
index f52f8b5..bce6fbf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
@@ -13,7 +13,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
- power {
+ key-power {
label = "Wake-Up";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
index 5d1cc8a..107b00b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
@@ -129,7 +129,7 @@ &i2c1 {
status = "okay";
touchscreen: touchscreen@38 {
- compatible ="edt,edt-ft5306";
+ compatible = "edt,edt-ft5306";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touchscreen>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index d12fb44..7ee25b1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -15,7 +15,7 @@ aliases {
};
gpio_keys: gpio-keys {
- compatible = "gpio-key";
+ compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
@@ -79,13 +79,13 @@ user_leds: user-leds {
user-led1 {
label = "yellow";
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "off";
+ linux,default-trigger = "none";
};
user-led2 {
label = "red";
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "off";
+ linux,default-trigger = "none";
};
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
index 6159ed7..2d9f495 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
@@ -33,6 +33,10 @@ &snvs_poweroff {
status = "okay";
};
+&uart2 {
+ status = "okay";
+};
+
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
index 7ee66be..7acd286 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
@@ -270,7 +270,7 @@ &i2c3 {
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
- touch@48 {
+ touchscreen@48 {
compatible = "ti,tsc2004";
reg = <0x48>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index f2cd95e..56dedd4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -23,7 +23,7 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpio>;
autorepeat;
- back {
+ key-back {
label = "Back";
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index 67a3d48..65fde4f5 100644
--- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -146,6 +146,13 @@ sound {
ssi-controller = <&sai1>;
audio-codec = <&tlv320aic32x4>;
audio-asrc = <&asrc>;
+ audio-routing =
+ "IN3_L", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "IN1_L", "Line In Jack",
+ "IN1_R", "Line In Jack",
+ "Line Out Jack", "LOL",
+ "Line Out Jack", "LOR";
};
};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 6dd73290f..152e98c 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -100,23 +100,25 @@ dmac: dma-controller@40002000 {
memcpy-bus-width = <32>;
};
- spifi: flash-controller@40003000 {
+ spifi: spi@40003000 {
compatible = "nxp,lpc1773-spifi";
reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
reg-names = "spifi", "flash";
interrupts = <30>;
clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
clock-names = "spifi", "reg";
+ #address-cells = <1>;
+ #size-cells = <0>;
resets = <&rgu 53>;
status = "disabled";
};
- mmcsd: mmcsd@40004000 {
+ mmcsd: mmc@40004000 {
compatible = "snps,dw-mshc";
reg = <0x40004000 0x1000>;
interrupts = <6>;
- clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
- clock-names = "ciu", "biu";
+ clocks = <&ccu1 CLK_CPU_SDIO>, <&ccu2 CLK_SDIO>;
+ clock-names = "biu", "ciu";
resets = <&rgu 20>;
status = "disabled";
};
@@ -535,3 +537,7 @@ gpio: gpio@400f4000 {
};
};
};
+
+&nvic {
+ arm,num-irq-priority-bits = <3>;
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index 6cf405e..2236901 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -77,12 +77,13 @@ mlc: flash@200a8000 {
status = "disabled";
};
- dma: dma@31000000 {
+ dma: dma-controller@31000000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0x31000000 0x1000>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_DMA>;
clock-names = "apb_pclk";
+ #dma-cells = <2>;
};
usb {
@@ -224,8 +225,8 @@ i2s0: i2s@20094000 {
status = "disabled";
};
- sd: sd@20098000 {
- compatible = "arm,pl18x", "arm,primecell";
+ sd: mmc@20098000 {
+ compatible = "arm,pl180", "arm,primecell";
reg = <0x20098000 0x1000>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
<13 IRQ_TYPE_LEVEL_HIGH>;
@@ -298,11 +299,11 @@ i2c2: i2c@400a8000 {
clocks = <&clk LPC32XX_CLK_I2C2>;
};
- mpwm: mpwm@400e8000 {
+ mpwm: pwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400e8000 0x78>;
+ #pwm-cells = <3>;
status = "disabled";
- #pwm-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
index beddaba..5ff43c8 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
@@ -108,14 +108,14 @@ i2c0_pins_cfg {
};
ssp_pins: ssp-pins {
- ssp1_cs {
+ ssp1_cs_cfg {
pins = "p6_7";
function = "gpio";
bias-pull-up;
bias-disable;
};
- ssp1_miso_mosi {
+ ssp1_miso_mosi_cfg {
pins = "p1_3", "p1_4";
function = "ssp1";
slew-rate = <1>;
@@ -124,7 +124,7 @@ ssp1_miso_mosi {
input-schmitt-disable;
};
- ssp1_sck {
+ ssp1_sck_cfg {
pins = "pf_4";
function = "ssp1";
slew-rate = <1>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
index 93d0c2e..18f757c 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
@@ -43,50 +43,50 @@ pca_buttons {
poll-interval = <100>;
autorepeat;
- button0 {
+ button-0 {
label = "joy:right";
linux,code = <KEY_RIGHT>;
gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
};
- button1 {
+ button-1 {
label = "joy:up";
linux,code = <KEY_UP>;
gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
};
- button2 {
+ button-2 {
label = "joy:enter";
linux,code = <KEY_ENTER>;
gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
};
- button3 {
+ button-3 {
label = "joy:left";
linux,code = <KEY_LEFT>;
gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
};
- button4 {
+ button-4 {
label = "joy:down";
linux,code = <KEY_DOWN>;
gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
};
- button5 {
+ button-5 {
label = "user:sw3";
linux,code = <KEY_F1>;
gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
};
- button6 {
+ button-6 {
label = "user:sw4";
linux,code = <KEY_F2>;
gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
};
- button7 {
+ button-7 {
label = "user:sw5";
linux,code = <KEY_F3>;
gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
@@ -406,6 +406,9 @@ cs2 {
ext_sram: sram@2,0 {
compatible = "mmio-sram";
reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 2 0 0x80000>;
};
};
};
@@ -451,8 +454,9 @@ &spifi {
pinctrl-names = "default";
pinctrl-0 = <&spifi_pins>;
- flash {
+ flash@0 {
compatible = "jedec,spi-nor";
+ reg = <0>;
spi-rx-bus-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
index c4422f5..707d22a 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
@@ -24,16 +24,25 @@ soc {
sram0: sram@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
};
sram1: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
};
sram2: sram@20000000 {
compatible = "mmio-sram";
reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
};
};
};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
index 4aefbc0..7ccb4c2 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -60,31 +60,31 @@ gpio_joystick {
poll-interval = <100>;
autorepeat;
- button0 {
+ button-0 {
label = "joy_enter";
linux,code = <KEY_ENTER>;
gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
};
- button1 {
+ button-1 {
label = "joy_left";
linux,code = <KEY_LEFT>;
gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
};
- button2 {
+ button-2 {
label = "joy_up";
linux,code = <KEY_UP>;
gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
};
- button3 {
+ button-3 {
label = "joy_right";
linux,code = <KEY_RIGHT>;
gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
};
- button4 {
+ button-4 {
label = "joy_down";
linux,code = <KEY_DOWN>;
gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
@@ -403,7 +403,7 @@ spifi_cs_cfg {
};
ssp0_pins: ssp0-pins {
- ssp0_sck_miso_mosi {
+ ssp0_sck_miso_mosi_cfg {
pins = "pf_0", "pf_2", "pf_3";
function = "ssp0";
slew-rate = <1>;
@@ -412,7 +412,7 @@ ssp0_sck_miso_mosi {
input-schmitt-disable;
};
- ssp0_ssel {
+ ssp0_ssel_cfg {
pins = "pf_1";
function = "ssp0";
bias-pull-up;
@@ -452,12 +452,12 @@ uart3_tx_cfg {
};
usb0_pins: usb0-pins {
- usb0_pwr_enable {
+ usb0_pwr_enable_cfg {
pins = "p2_3";
function = "usb0";
};
- usb0_pwr_fault {
+ usb0_pwr_fault_cfg {
pins = "p8_0";
function = "usb0";
bias-disable;
@@ -582,8 +582,9 @@ &spifi {
pinctrl-names = "default";
pinctrl-0 = <&spifi_pins>;
- flash {
+ flash@0 {
compatible = "jedec,spi-nor";
+ reg = <0>;
spi-cpol;
spi-cpha;
spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
index 846afb8..d18f2b2 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -63,6 +63,7 @@ led6 {
panel: panel {
compatible = "innolux,at070tn92";
+ power-supply = <&vcc>;
port {
panel_input: endpoint {
@@ -543,7 +544,7 @@ &mac {
pinctrl-0 = <&enet_rmii_pins>;
phy-handle = <&phy1>;
- mdio0 {
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
@@ -569,8 +570,9 @@ &spifi {
pinctrl-0 = <&spifi_pins>;
/* Atmel AT25DF321A */
- flash {
+ flash@0 {
compatible = "jedec,spi-nor";
+ reg = <0>;
spi-max-frequency = <51000000>;
spi-cpol;
spi-cpha;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
index 72f12db..d138ee7 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
@@ -24,16 +24,25 @@ soc {
sram0: sram@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
};
sram1: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
};
sram2: sram@20000000 {
compatible = "mmio-sram";
reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
};
};
};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
index f1acb97..a880875 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
@@ -66,7 +66,7 @@ &dspi0 {
bus-num = <0>;
status = "okay";
- dspiflash: at45db021d@0 {
+ dspiflash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
@@ -187,7 +187,7 @@ &ifc {
<0x3 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0,0 {
+ flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
@@ -211,8 +211,8 @@ fpga: board-control@3,0 {
device-width = <1>;
ranges = <0 3 0 0x100>;
- mdio-mux-emi1 {
- compatible = "mdio-mux-mmioreg";
+ mdio-mux@54 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&mdio0>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
index 146d456..66cedc2 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
@@ -36,7 +36,7 @@ &i2c0 {
#size-cells = <0>;
polytouch: touchscreen@38 {
- compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+ compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&pca9554_0>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
index db66831..8b9455b 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
@@ -36,7 +36,7 @@ &i2c0 {
#size-cells = <0>;
polytouch: touchscreen@38 {
- compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+ compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&pca9554_0>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
index 271001e..1675595 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
@@ -66,8 +66,6 @@ &qspi {
qflash0: flash@0 {
compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
spi-max-frequency = <20000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
index 1ea32ff..da76566 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
@@ -40,8 +40,6 @@ &dspi0 {
/* ADG704BRMZ 1:4 SPI mux/demux */
sja1105: ethernet-switch@1 {
reg = <0x1>;
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "nxp,sja1105t";
/* 12 MHz */
spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
index f5c0387..38281b9 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
@@ -151,7 +151,7 @@ &ifc {
ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
status = "okay";
- nor@0,0 {
+ flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index e86998c..e0b9ea6 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -93,10 +93,9 @@ ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
};
- gic: interrupt-controller@1400000 {
+ gic: interrupt-controller@1401000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -155,14 +154,13 @@ qspi: spi@1550000 {
status = "disabled";
};
- esdhc: esdhc@1560000 {
+ esdhc: mmc@1560000 {
compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
- big-endian;
bus-width = <4>;
status = "disabled";
};
@@ -611,11 +609,10 @@ pwm7: pwm@2a40000 {
};
wdog0: watchdog@2ad0000 {
- compatible = "fsl,imx21-wdt";
+ compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
- clock-names = "wdog-en";
big-endian;
};
@@ -627,9 +624,9 @@ sai1: sai@2b50000 {
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dma-names = "tx", "rx";
- dmas = <&edma0 1 47>,
- <&edma0 1 46>;
+ dma-names = "rx", "tx";
+ dmas = <&edma0 1 46>,
+ <&edma0 1 47>;
status = "disabled";
};
@@ -641,9 +638,9 @@ sai2: sai@2b60000 {
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dma-names = "tx", "rx";
- dmas = <&edma0 1 45>,
- <&edma0 1 44>;
+ dma-names = "rx", "tx";
+ dmas = <&edma0 1 44>,
+ <&edma0 1 45>;
status = "disabled";
};
@@ -707,6 +704,7 @@ ptp_clock@2d10e00 {
enet0: ethernet@2d10000 {
compatible = "fsl,etsec2";
+ reg = <0x0 0x2d10000 0x0 0x5000>;
device_type = "network";
#address-cells = <2>;
#size-cells = <2>;
@@ -717,8 +715,6 @@ enet0: ethernet@2d10000 {
dma-coherent;
queue-group@2d10000 {
- #address-cells = <2>;
- #size-cells = <2>;
reg = <0x0 0x2d10000 0x0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
@@ -726,8 +722,6 @@ queue-group@2d10000 {
};
queue-group@2d14000 {
- #address-cells = <2>;
- #size-cells = <2>;
reg = <0x0 0x2d14000 0x0 0x1000>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
@@ -737,6 +731,7 @@ queue-group@2d14000 {
enet1: ethernet@2d50000 {
compatible = "fsl,etsec2";
+ reg = <0x0 0x2d50000 0x0 0x5000>;
device_type = "network";
#address-cells = <2>;
#size-cells = <2>;
@@ -746,8 +741,6 @@ enet1: ethernet@2d50000 {
dma-coherent;
queue-group@2d50000 {
- #address-cells = <2>;
- #size-cells = <2>;
reg = <0x0 0x2d50000 0x0 0x1000>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
@@ -755,8 +748,6 @@ queue-group@2d50000 {
};
queue-group@2d54000 {
- #address-cells = <2>;
- #size-cells = <2>;
reg = <0x0 0x2d54000 0x0 0x1000>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
@@ -766,6 +757,7 @@ queue-group@2d54000 {
enet2: ethernet@2d90000 {
compatible = "fsl,etsec2";
+ reg = <0x0 0x2d90000 0x0 0x5000>;
device_type = "network";
#address-cells = <2>;
#size-cells = <2>;
@@ -775,8 +767,6 @@ enet2: ethernet@2d90000 {
dma-coherent;
queue-group@2d90000 {
- #address-cells = <2>;
- #size-cells = <2>;
reg = <0x0 0x2d90000 0x0 0x1000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
@@ -784,8 +774,6 @@ queue-group@2d90000 {
};
queue-group@2d94000 {
- #address-cells = <2>;
- #size-cells = <2>;
reg = <0x0 0x2d94000 0x0 0x1000>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
@@ -810,7 +798,6 @@ usb3: usb@3100000 {
snps,dis_rxdet_inp3_quirk;
usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- snps,host-vbus-glitches;
};
pcie@3400000 {
@@ -917,7 +904,7 @@ ocram2: sram@10010000 {
ranges = <0x0 0x0 0x10010000 0x10000>;
};
- qdma: dma-controller@8390000 {
+ qdma: dma-controller@8388000 {
compatible = "fsl,ls1021a-qdma";
reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
<0x0 0x8389000 0x0 0x1000>, /* Status regs */
@@ -937,17 +924,15 @@ qdma: dma-controller@8390000 {
big-endian;
};
- rcpm: power-controller@1ee2140 {
+ rcpm: wakeup-controller@1ee2140 {
compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1ee2140 0x0 0x8>;
#fsl,rcpm-wakeup-cells = <2>;
- #power-domain-cells = <0>;
};
- ftm_alarm0: timer0@29d0000 {
+ ftm_alarm0: rtc@29d0000 {
compatible = "fsl,ls1021a-ftm-alarm";
reg = <0x0 0x29d0000 0x0 0x10000>;
- reg-names = "ftm";
fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 029f49b..be61472 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -412,13 +412,13 @@ &mdio1 {
};
&iomuxc {
- pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+ pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp {
fsl,pins = <
VF610_PAD_PTE27__GPIO_132 0x33e2
>;
};
- pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+ pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
fsl,pins = <
VF610_PAD_PTB22__GPIO_44 0x33e2
VF610_PAD_PTB21__GPIO_43 0x33e2
@@ -428,7 +428,7 @@ VF610_PAD_PTB18__GPIO_40 0x33e2
>;
};
- pinctrl_mdio_mux: pinctrl-mdio-mux {
+ pinctrl_mdio_mux: pinctrl-mdio-mux-grp {
fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x31c2
VF610_PAD_PTA19__GPIO_9 0x31c2
@@ -437,7 +437,7 @@ VF610_PAD_PTB3__GPIO_25 0x31c2
>;
};
- pinctrl_pca9554_22: pinctrl-pca95540-22 {
+ pinctrl_pca9554_22: pinctrl-pca95540-22-grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x219d
>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
index ce5e528..91cc496 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
@@ -335,7 +335,7 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
- pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+ pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
fsl,pins = <
VF610_PAD_PTB22__GPIO_44 0x33e2
VF610_PAD_PTB21__GPIO_43 0x33e2
@@ -345,19 +345,19 @@ VF610_PAD_PTB18__GPIO_40 0x33e2
>;
};
- pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0-grp {
fsl,pins = <
VF610_PAD_PTB5__GPIO_27 0x219d
>;
};
- pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+ pinctrl_gpio_switch1: pinctrl-gpio-switch1-grp {
fsl,pins = <
VF610_PAD_PTB4__GPIO_26 0x219d
>;
};
- pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+ pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset-grp {
fsl,pins = <
VF610_PAD_PTE14__GPIO_119 0x31c2
>;
@@ -370,7 +370,7 @@ VF610_PAD_PTB15__I2C0_SDA 0x37ff
>;
};
- pinctrl_i2c0_gpio: i2c0grp-gpio {
+ pinctrl_i2c0_gpio: i2c0-gpio-grp {
fsl,pins = <
VF610_PAD_PTB14__GPIO_36 0x31c2
VF610_PAD_PTB15__GPIO_37 0x31c2
@@ -392,7 +392,7 @@ VF610_PAD_PTA23__I2C2_SDA 0x37ff
>;
};
- pinctrl_leds_debug: pinctrl-leds-debug {
+ pinctrl_leds_debug: pinctrl-leds-debug-grp {
fsl,pins = <
VF610_PAD_PTD20__GPIO_74 0x31c2
>;
@@ -436,7 +436,7 @@ VF610_PAD_PTD22__UART2_RX 0x21a1
>;
};
- pinctrl_usb_vbus: pinctrl-usb-vbus {
+ pinctrl_usb_vbus: pinctrl-usb-vbus-grp {
fsl,pins = <
VF610_PAD_PTA16__GPIO_6 0x31c2
>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
index 2bb331a..648d219 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
@@ -55,3 +55,7 @@ / {
&mscm_ir {
interrupt-parent = <&nvic>;
};
+
+&nvic {
+ arm,num-irq-priority-bits = <4>;
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index 124003c..568d818 100644
--- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -304,7 +304,7 @@ qspi0: spi@40044000 {
status = "disabled";
};
- iomuxc: iomuxc@40048000 {
+ iomuxc: pinctrl@40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
};
@@ -682,7 +682,7 @@ can1: can@400d4000 {
status = "disabled";
};
- nfc: nand@400e0000 {
+ nfc: nand-controller@400e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-nfc";
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index e875b5d..c7873dc 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -43,6 +43,7 @@
qcom-msm8926-samsung-matisselte.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8960-samsung-expressatt.dtb \
+ qcom-msm8960-sony-huashan.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-samsung-hlte.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 058962a..535cb6a 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -17,6 +17,12 @@ pwrkey@1c {
pull-up;
};
+ pm8921_vibrator: vibrator@4a {
+ compatible = "qcom,pm8921-vib";
+ reg = <0x4a>;
+ status = "disabled";
+ };
+
pm8921_mpps: mpps@50 {
compatible = "qcom,pm8921-mpp",
"qcom,ssbi-mpp";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
index c187c68..fdbbc13 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
@@ -34,7 +34,7 @@ reserved-memory {
#size-cells = <1>;
ranges;
- ramoops@88d00000{
+ ramoops@88d00000 {
compatible = "ramoops";
reg = <0x88d00000 0x100000>;
record-size = <0x20000>;
@@ -326,8 +326,8 @@ pm8921_s3: s3 {
*/
pm8921_s4: s4 {
regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 17e506c..09062b2 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -342,6 +342,7 @@ sfpb_mutex: hwmutex@1200600 {
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x02000000 0x1000>,
<0x02002000 0x1000>;
@@ -1350,10 +1351,10 @@ pcie: pcie@1b500000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
<&gcc PCIE_PHY_REF_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f77542f..8eeaab1 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -175,6 +175,7 @@ soc {
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>,
<0x0b002000 0x1000>;
@@ -428,10 +429,10 @@ pcie0: pcie@40000000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_AHB_CLK>,
<&gcc GCC_PCIE_AXI_M_CLK>,
<&gcc GCC_PCIE_AXI_S_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 96e9735..adedcc6 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -527,6 +527,7 @@ sfpb_mutex: hwlock@1200600 {
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x02000000 0x1000>,
<0x02002000 0x1000>;
@@ -1076,10 +1077,10 @@ pcie0: pcie@1b500000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
@@ -1137,10 +1138,10 @@ pcie1: pcie@1b700000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_1_A_CLK>,
<&gcc PCIE_1_H_CLK>,
@@ -1198,10 +1199,10 @@ pcie2: pcie@1b900000 {
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_2_A_CLK>,
<&gcc PCIE_2_H_CLK>,
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
index 2ecc598..08b50dc 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -144,6 +144,8 @@ touchscreen@20 {
pinctrl-0 = <&tsp_int_default>;
pinctrl-names = "default";
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
index 4fa98277..f18753e 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
@@ -18,4 +18,44 @@ i2c3-pins {
bias-bus-hold;
};
};
+
+ sdcc3_default_state: sdcc3-default-state {
+ clk-pins {
+ pins = "sdc3_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc3_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc3_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_sleep_state: sdcc3-sleep-state {
+ clk-pins {
+ pins = "sdc3_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc3_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc3_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index af6cc63..49d117e 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -71,6 +71,11 @@ &sdcc1 {
&sdcc3 {
vmmc-supply = <&pm8921_l6>;
vqmmc-supply = <&pm8921_l7>;
+
+ pinctrl-0 = <&sdcc3_default_state>;
+ pinctrl-1 = <&sdcc3_sleep_state>;
+ pinctrl-names = "default", "sleep";
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
new file mode 100644
index 0000000..f2f59fc
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2025, Antony Kurniawan Soemardi <linux@smankusors.com>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+ model = "Sony Xperia SP";
+ compatible = "sony,huashan", "qcom,msm8960t", "qcom,msm8960";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &gsbi8_serial;
+ mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+ mmc1 = &sdcc3; /* SDCC3 SD card slot */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&pm8921_gpio 21 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&pm8921_gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+};
+
+&gsbi8 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+};
+
+&gsbi8_serial {
+ status = "okay";
+};
+
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+ keypad_default_state: keypad-default-state {
+ keypad-sense-pins {
+ pins = "gpio1", "gpio2", "gpio3", "gpio4", "gpio5";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-up;
+ input-enable;
+ power-source = <PM8921_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_31P5>;
+ };
+
+ keypad-drive-pins {
+ pins = "gpio9", "gpio10";
+ function = PMIC_GPIO_FUNC_FUNC1;
+ bias-disable;
+ drive-open-drain;
+ output-low;
+ power-source = <PM8921_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+ };
+};
+
+&pm8921_keypad {
+ linux,keymap = <
+ MATRIX_KEY(1, 0, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(1, 1, KEY_CAMERA)
+ >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <5>;
+
+ pinctrl-0 = <&keypad_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+ vdd_ncp-supply = <&pm8921_l6>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l21_l23_l29-supply = <&pm8921_s8>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+ vdd_l29-supply = <&pm8921_s8>;
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s2: s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ pm8921_s4: s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s8: s8 {
+ regulator-always-on;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8921_l1: l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8921_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l7: l7 {
+ regulator-always-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l8: l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l9: l9 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8921_l10: l10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l11: l11 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l12: l12 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l16: l16 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l17: l17 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l18: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l21: l21 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8921_l22: l22 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l24: l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8921_l25: l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs2: lvs2 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs3: lvs3 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs4: lvs4 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs5: lvs5 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs7: lvs7 {
+ bias-pull-down;
+ };
+
+ pm8921_ncp: ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+};
+
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ status = "okay";
+};
+
+&sdcc3 {
+ vmmc-supply = <&pm8921_l6>;
+ vqmmc-supply = <&pm8921_l7>;
+
+ pinctrl-0 = <&sdcc3_default_state>;
+ pinctrl-1 = <&sdcc3_sleep_state>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&usb_hs1_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 203f0b6..6e272d5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -322,6 +322,8 @@ gsbi5: gsbi@16400000 {
syscon-tcsr = <&tcsr>;
+ status = "disabled";
+
gsbi5_serial: serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
@@ -333,6 +335,34 @@ gsbi5_serial: serial@16440000 {
};
};
+ gsbi8: gsbi@1a000000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <8>;
+ reg = <0x1a000000 0x100>;
+ clocks = <&gcc GSBI8_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ status = "disabled";
+
+ gsbi8_serial: serial@1a040000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a040000 0x1000>,
+ <0x1a000000 0x1000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI8_UART_CLK>,
+ <&gcc GSBI8_H_CLK>;
+ clock-names = "core",
+ "iface";
+
+ status = "disabled";
+ };
+ };
+
ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
@@ -417,6 +447,8 @@ gsbi1: gsbi@16000000 {
#size-cells = <1>;
ranges;
+ status = "disabled";
+
gsbi1_spi: spi@16080000 {
compatible = "qcom,spi-qup-v1.1.1";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
index 903bb4d..b7a1367 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
@@ -50,6 +50,34 @@ key-volume-up {
};
};
+ i2c-touchkey {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ pinctrl-0 = <&i2c_touchkey_pins>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@20 {
+ compatible = "cypress,midas-touchkey";
+ reg = <0x20>;
+
+ interrupts-extended = <&pm8941_gpios 29 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&touchkey_pin>;
+ pinctrl-names = "default";
+
+ vcc-supply = <&pm8941_lvs3>;
+ vdd-supply = <&pm8941_l13>;
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+ };
+
touch_ldo: regulator-touch {
compatible = "regulator-fixed";
regulator-name = "touch-ldo";
@@ -149,6 +177,14 @@ touch_ldo_pin: touchscreen-ldo-state {
power-source = <PM8941_GPIO_S3>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
+
+ touchkey_pin: touchkey-int-state {
+ pins = "gpio29";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PM8941_GPIO_S3>;
+ };
};
&remoteproc_adsp {
@@ -332,6 +368,9 @@ pm8941_l24: l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
+
+ pm8941_lvs1: lvs1 {};
+ pm8941_lvs3: lvs3 {};
};
};
@@ -378,6 +417,12 @@ sdhc3_pin_a: sdhc3-pin-active-state {
drive-strength = <8>;
bias-disable;
};
+
+ i2c_touchkey_pins: i2c-touchkey-state {
+ pins = "gpio95", "gpio96";
+ function = "gpio";
+ bias-pull-up;
+ };
};
&usb {
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 20fdae9..05b7928 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -340,10 +340,10 @@ pcie_rc: pcie@1c00000 {
"msi8";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_PIPE_CLK>,
<&gcc GCC_PCIE_AUX_CLK>,
@@ -707,6 +707,7 @@ intc: interrupt-controller@17800000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
interrupt-parent = <&intc>;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x17800000 0x1000>,
<0x17802000 0x1000>;
diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
index c81840d..3c37565 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -203,6 +203,7 @@ &mtu2 {
};
&ostm0 {
+ bootph-all;
status = "okay";
};
@@ -258,6 +259,7 @@ mmcif_pins: mmcif {
};
scif2_pins: serial2 {
+ bootph-all;
/* P3_0 as TxD2; P3_2 as RxD2 */
pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
};
@@ -286,7 +288,7 @@ &rtc {
&scif2 {
pinctrl-names = "default";
pinctrl-0 = <&scif2_pins>;
-
+ bootph-all;
status = "okay";
};
diff --git a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
index 9d29861..23ddec2 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
@@ -59,6 +59,7 @@ led1 {
&pinctrl {
scif2_pins: serial2 {
+ bootph-all;
/* P6_2 as RxD2; P6_3 as TxD2 */
pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
};
@@ -99,6 +100,7 @@ &mtu2 {
};
&ostm0 {
+ bootph-all;
status = "okay";
};
@@ -109,7 +111,7 @@ &ostm1 {
&scif2 {
pinctrl-names = "default";
pinctrl-0 = <&scif2_pins>;
-
+ bootph-all;
status = "okay";
};
diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
index 25c6d0c..91178fb 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
@@ -199,6 +199,7 @@ keyboard_pins: keyboard {
/* Serial Console */
scif2_pins: serial2 {
+ bootph-all;
pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */
<RZA1_PINMUX(3, 2, 4)>; /* RxD2 */
};
@@ -264,6 +265,7 @@ &sdhi1 {
};
&ostm0 {
+ bootph-all;
status = "okay";
};
@@ -278,6 +280,7 @@ &rtc {
&scif2 {
pinctrl-names = "default";
pinctrl-0 = <&scif2_pins>;
+ bootph-all;
status = "okay";
};
diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi
index 1a866db..a1e4e9a 100644
--- a/arch/arm/boot/dts/renesas/r7s72100.dtsi
+++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi
@@ -41,6 +41,7 @@ bsc: bus {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x18000000>;
+ bootph-all;
};
cpus {
@@ -107,6 +108,7 @@ soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ bootph-all;
L2: cache-controller@3ffff000 {
compatible = "arm,pl310-cache";
@@ -557,6 +559,7 @@ R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
pinctrl: pinctrl@fcfe3000 {
compatible = "renesas,r7s72100-ports";
+ bootph-all;
reg = <0xfcfe3000 0x4230>;
diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index f518ead..81b3c5d 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -289,7 +289,7 @@ vin0_pins: vin0 {
};
can0_pins: can0 {
- groups = "can0_data";
+ groups = "can0_data_b";
function = "can0";
};
diff --git a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
index dd42f8d..a5f5c6d 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
@@ -78,6 +78,21 @@ vcc_sys: regulator-vsys {
regulator-always-on;
regulator-boot-on;
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "HDMI";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
};
&cpu0 {
@@ -130,6 +145,8 @@ &gpu {
&hdmi {
ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec_c0>;
status = "okay";
};
@@ -283,6 +300,11 @@ &i2c5 {
status = "okay";
};
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
&io_domains {
status = "okay";
diff --git a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
index bb62372..6af1f64 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
@@ -422,6 +422,43 @@ max77686_irq: max77686-irq-pins {
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+
+ srom_ctl: srom-ctl-pins {
+ samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+ "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ srom_ebi: srom-ebi-pins {
+ samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+ "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+ "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+ "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+ "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+ "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+};
+
+&sromc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+ ethernet@1,0 {
+ compatible = "smsc,lan9115";
+ reg = <1 0 0x100>;
+ phy-mode = "mii";
+ smsc,irq-push-pull;
+ interrupt-parent = <&gpx0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ reg-io-width = <2>;
+
+ samsung,srom-page-mode;
+ samsung,srom-timing = <9 12 1 6 1 1>;
+ };
};
&usbdrd {
diff --git a/arch/arm/boot/dts/samsung/exynos5250.dtsi b/arch/arm/boot/dts/samsung/exynos5250.dtsi
index b9e7c49..4616794 100644
--- a/arch/arm/boot/dts/samsung/exynos5250.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5250.dtsi
@@ -1214,6 +1214,15 @@ &serial_3 {
dma-names = "rx", "tx";
};
+&sromc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x04000000 0x20000>,
+ <1 0 0x05000000 0x20000>,
+ <2 0 0x06000000 0x20000>,
+ <3 0 0x07000000 0x20000>;
+};
+
&sss {
clocks = <&clock CLK_SSS>;
clock-names = "secss";
diff --git a/arch/arm/boot/dts/samsung/exynos5410.dtsi b/arch/arm/boot/dts/samsung/exynos5410.dtsi
index 546035e..350bc8d 100644
--- a/arch/arm/boot/dts/samsung/exynos5410.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5410.dtsi
@@ -372,10 +372,10 @@ &sss {
&sromc {
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0 0 0x04000000 0x20000
- 1 0 0x05000000 0x20000
- 2 0 0x06000000 0x20000
- 3 0 0x07000000 0x20000>;
+ ranges = <0 0 0x04000000 0x20000>,
+ <1 0 0x05000000 0x20000>,
+ <2 0 0x06000000 0x20000>,
+ <3 0 0x07000000 0x20000>;
};
&trng {
diff --git a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
index 7e08a45..ab910e1 100644
--- a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
@@ -43,7 +43,7 @@ spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
spdif_tx: endpoint {
remote-endpoint = <&spdif_hiecout1>;
};
@@ -54,7 +54,7 @@ comp-spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
comp_spdif_tx: endpoint {
remote-endpoint = <&comp_spdif_hiecout1>;
};
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index 66d4f96..e906bf6 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -13,8 +13,6 @@
dtb-$(CONFIG_ARCH_SPEAR6XX) += \
spear600-evb.dtb
dtb-$(CONFIG_ARCH_STI) += \
- stih407-b2120.dtb \
- stih410-b2120.dtb \
stih410-b2260.dtb \
stih418-b2199.dtb \
stih418-b2264.dtb
diff --git a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
index c905c26..7c7a536 100644
--- a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
@@ -23,7 +23,7 @@ aliases {
gpio3: gpio@101e7000 {
/* This hog will bias the MMC/SD card detect line */
- mmcsd-gpio {
+ mmcsd-hog {
gpio-hog;
gpios = <16 0x0>;
output-low;
@@ -117,8 +117,8 @@ lis3lv02dl@1d {
/* GPIO I2C connected to the USB portions of the STw4811 only */
gpio-i2c {
compatible = "i2c-gpio";
- gpios = <&gpio2 10 0>, /* sda */
- <&gpio2 9 0>; /* scl */
+ sda-gpios = <&gpio2 10 0>;
+ scl-gpios = <&gpio2 9 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
index 404d4ea..8f1780d 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
@@ -383,8 +383,9 @@ bluetooth {
/* BT_WAKE on GPIO199 */
device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
/* BT_HOST_WAKE on GPIO97 */
- /* FIXME: convert to interrupt */
- host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
/* BT_RST_N on GPIO209 */
reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
index 40b0d92..9f58a3c 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
@@ -479,8 +479,9 @@ bluetooth {
/* BT_WAKE on GPIO199 */
device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
/* BT_HOST_WAKE on GPIO97 */
- /* FIXME: convert to interrupt */
- host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
/* BT_RST_N on GPIO209 */
reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
index 229f7c3..64562a3 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
@@ -481,8 +481,9 @@ bluetooth {
/* BT_WAKE on GPIO199 */
device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
/* BT_HOST_WAKE on GPIO97 */
- /* FIXME: convert to interrupt */
- host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
/* BT_RST_N on GPIO209 */
reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/stih407-b2120.dts b/arch/arm/boot/dts/st/stih407-b2120.dts
deleted file mode 100644
index 9c79982..0000000
--- a/arch/arm/boot/dts/st/stih407-b2120.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-/dts-v1/;
-#include "stih407.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
- model = "STiH407 B2120";
- compatible = "st,stih407-b2120", "st,stih407";
-
- chosen {
- stdout-path = &sbc_serial0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x80000000>;
- };
-
- aliases {
- serial0 = &sbc_serial0;
- ethernet0 = ðernet0;
- };
-
-};
diff --git a/arch/arm/boot/dts/st/stih407-clock.dtsi b/arch/arm/boot/dts/st/stih407-clock.dtsi
deleted file mode 100644
index 350bcfcf..0000000
--- a/arch/arm/boot/dts/st/stih407-clock.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics R&D Limited
- */
-#include <dt-bindings/clock/stih407-clks.h>
-/ {
- /*
- * Fixed 30MHz oscillator inputs to SoC
- */
- clk_sysin: clk-sysin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <30000000>;
- };
-
- clk_tmdsout_hdmi: clk-tmdsout-hdmi {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * A9 PLL.
- */
- clockgen-a9@92b0000 {
- compatible = "st,clkgen-c32";
- reg = <0x92b0000 0x10000>;
-
- clockgen_a9_pll: clockgen-a9-pll {
- #clock-cells = <1>;
- compatible = "st,stih407-clkgen-plla9";
-
- clocks = <&clk_sysin>;
- };
-
- clk_m_a9: clk-m-a9 {
- #clock-cells = <0>;
- compatible = "st,stih407-clkgen-a9-mux";
-
- clocks = <&clockgen_a9_pll 0>,
- <&clockgen_a9_pll 0>,
- <&clk_s_c0_flexgen 13>,
- <&clk_m_a9_ext2f_div2>;
-
- /*
- * ARM Peripheral clock for timers
- */
- arm_periph_clk: clk-m-a9-periphs {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_m_a9>;
- clock-div = <2>;
- clock-mult = <1>;
- };
- };
- };
-
- clockgen-a@90ff000 {
- compatible = "st,clkgen-c32";
- reg = <0x90ff000 0x1000>;
-
- clk_s_a0_pll: clk-s-a0-pll {
- #clock-cells = <1>;
- compatible = "st,clkgen-pll0-a0";
-
- clocks = <&clk_sysin>;
- };
-
- clk_s_a0_flexgen: clk-s-a0-flexgen {
- compatible = "st,flexgen", "st,flexgen-stih407-a0";
-
- #clock-cells = <1>;
-
- clocks = <&clk_s_a0_pll 0>,
- <&clk_sysin>;
- };
- };
-
- clk_s_c0: clockgen-c@9103000 {
- compatible = "st,clkgen-c32";
- reg = <0x9103000 0x1000>;
-
- clk_s_c0_pll0: clk-s-c0-pll0 {
- #clock-cells = <1>;
- compatible = "st,clkgen-pll0-c0";
-
- clocks = <&clk_sysin>;
- };
-
- clk_s_c0_pll1: clk-s-c0-pll1 {
- #clock-cells = <1>;
- compatible = "st,clkgen-pll1-c0";
-
- clocks = <&clk_sysin>;
- };
-
- clk_s_c0_quadfs: clk-s-c0-quadfs {
- #clock-cells = <1>;
- compatible = "st,quadfs-pll";
-
- clocks = <&clk_sysin>;
- };
-
- clk_s_c0_flexgen: clk-s-c0-flexgen {
- #clock-cells = <1>;
- compatible = "st,flexgen", "st,flexgen-stih407-c0";
-
- clocks = <&clk_s_c0_pll0 0>,
- <&clk_s_c0_pll1 0>,
- <&clk_s_c0_quadfs 0>,
- <&clk_s_c0_quadfs 1>,
- <&clk_s_c0_quadfs 2>,
- <&clk_s_c0_quadfs 3>,
- <&clk_sysin>;
-
- /*
- * ARM Peripheral clock for timers
- */
- clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
-
- clocks = <&clk_s_c0_flexgen 13>;
-
- clock-output-names = "clk-m-a9-ext2f-div2";
-
- clock-div = <2>;
- clock-mult = <1>;
- };
- };
- };
-
- clockgen-d0@9104000 {
- compatible = "st,clkgen-c32";
- reg = <0x9104000 0x1000>;
-
- clk_s_d0_quadfs: clk-s-d0-quadfs {
- #clock-cells = <1>;
- compatible = "st,quadfs-d0";
-
- clocks = <&clk_sysin>;
- };
-
- clk_s_d0_flexgen: clk-s-d0-flexgen {
- #clock-cells = <1>;
- compatible = "st,flexgen", "st,flexgen-stih407-d0";
-
- clocks = <&clk_s_d0_quadfs 0>,
- <&clk_s_d0_quadfs 1>,
- <&clk_s_d0_quadfs 2>,
- <&clk_s_d0_quadfs 3>,
- <&clk_sysin>;
- };
- };
-
- clockgen-d2@9106000 {
- compatible = "st,clkgen-c32";
- reg = <0x9106000 0x1000>;
-
- clk_s_d2_quadfs: clk-s-d2-quadfs {
- #clock-cells = <1>;
- compatible = "st,quadfs-d2";
-
- clocks = <&clk_sysin>;
- };
-
- clk_s_d2_flexgen: clk-s-d2-flexgen {
- #clock-cells = <1>;
- compatible = "st,flexgen", "st,flexgen-stih407-d2";
-
- clocks = <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>,
- <&clk_s_d2_quadfs 2>,
- <&clk_s_d2_quadfs 3>,
- <&clk_sysin>,
- <&clk_sysin>,
- <&clk_tmdsout_hdmi>;
- };
- };
-
- clockgen-d3@9107000 {
- compatible = "st,clkgen-c32";
- reg = <0x9107000 0x1000>;
-
- clk_s_d3_quadfs: clk-s-d3-quadfs {
- #clock-cells = <1>;
- compatible = "st,quadfs-d3";
-
- clocks = <&clk_sysin>;
- };
-
- clk_s_d3_flexgen: clk-s-d3-flexgen {
- #clock-cells = <1>;
- compatible = "st,flexgen", "st,flexgen-stih407-d3";
-
- clocks = <&clk_s_d3_quadfs 0>,
- <&clk_s_d3_quadfs 1>,
- <&clk_s_d3_quadfs 2>,
- <&clk_s_d3_quadfs 3>,
- <&clk_sysin>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi
index 35a55ae..3e6a054 100644
--- a/arch/arm/boot/dts/st/stih407-family.dtsi
+++ b/arch/arm/boot/dts/st/stih407-family.dtsi
@@ -669,7 +669,7 @@ sata0: sata@9b20000 {
interrupt-names = "hostc";
phys = <&phy_port0 PHY_TYPE_SATA>;
- phy-names = "ahci_phy";
+ phy-names = "sata-phy";
resets = <&powerdown STIH407_SATA0_POWERDOWN>,
<&softreset STIH407_SATA0_SOFTRESET>,
@@ -692,7 +692,7 @@ sata1: sata@9b28000 {
interrupt-names = "hostc";
phys = <&phy_port1 PHY_TYPE_SATA>;
- phy-names = "ahci_phy";
+ phy-names = "sata-phy";
resets = <&powerdown STIH407_SATA1_POWERDOWN>,
<&softreset STIH407_SATA1_SOFTRESET>,
diff --git a/arch/arm/boot/dts/st/stih407.dtsi b/arch/arm/boot/dts/st/stih407.dtsi
deleted file mode 100644
index aca43d2..0000000
--- a/arch/arm/boot/dts/st/stih407.dtsi
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 STMicroelectronics Limited.
- * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
- */
-#include "stih407-clock.dtsi"
-#include "stih407-family.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
- soc {
- sti-display-subsystem@0 {
- compatible = "st,sti-display-subsystem";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0 0>;
- assigned-clocks = <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>,
- <&clk_s_c0_pll1 0>,
- <&clk_s_c0_flexgen CLK_COMPO_DVP>,
- <&clk_s_c0_flexgen CLK_MAIN_DISP>,
- <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
- <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
- <&clk_s_d2_flexgen CLK_PIX_GDP1>,
- <&clk_s_d2_flexgen CLK_PIX_GDP2>,
- <&clk_s_d2_flexgen CLK_PIX_GDP3>,
- <&clk_s_d2_flexgen CLK_PIX_GDP4>;
-
- assigned-clock-parents = <0>,
- <0>,
- <0>,
- <&clk_s_c0_pll1 0>,
- <&clk_s_c0_pll1 0>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 0>;
-
- assigned-clock-rates = <297000000>,
- <108000000>,
- <0>,
- <400000000>,
- <400000000>;
-
- ranges;
-
- sti-compositor@9d11000 {
- compatible = "st,stih407-compositor";
- reg = <0x9d11000 0x1000>;
-
- clock-names = "compo_main",
- "compo_aux",
- "pix_main",
- "pix_aux",
- "pix_gdp1",
- "pix_gdp2",
- "pix_gdp3",
- "pix_gdp4",
- "main_parent",
- "aux_parent";
-
- clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
- <&clk_s_c0_flexgen CLK_COMPO_DVP>,
- <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
- <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
- <&clk_s_d2_flexgen CLK_PIX_GDP1>,
- <&clk_s_d2_flexgen CLK_PIX_GDP2>,
- <&clk_s_d2_flexgen CLK_PIX_GDP3>,
- <&clk_s_d2_flexgen CLK_PIX_GDP4>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
-
- reset-names = "compo-main", "compo-aux";
- resets = <&softreset STIH407_COMPO_SOFTRESET>,
- <&softreset STIH407_COMPO_SOFTRESET>;
- st,vtg = <&vtg_main>, <&vtg_aux>;
- };
-
- sti-tvout@8d08000 {
- compatible = "st,stih407-tvout";
- reg = <0x8d08000 0x1000>;
- reg-names = "tvout-reg";
- reset-names = "tvout";
- resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
- #address-cells = <1>;
- #size-cells = <1>;
- assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
- <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
- <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
- <&clk_s_d0_flexgen CLK_PCM_0>,
- <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
- <&clk_s_d2_flexgen CLK_HDDAC>;
-
- assigned-clock-parents = <&clk_s_d2_quadfs 0>,
- <&clk_tmdsout_hdmi>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d0_quadfs 0>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 0>;
- };
-
- sti_hdmi: sti-hdmi@8d04000 {
- compatible = "st,stih407-hdmi";
- reg = <0x8d04000 0x1000>;
- reg-names = "hdmi-reg";
- #sound-dai-cells = <0>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irq";
- clock-names = "pix",
- "tmds",
- "phy",
- "audio",
- "main_parent",
- "aux_parent";
-
- clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
- <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
- <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
- <&clk_s_d0_flexgen CLK_PCM_0>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
-
- hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
- reset-names = "hdmi";
- resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
- ddc = <&hdmiddc>;
- };
-
- sti-hda@8d02000 {
- compatible = "st,stih407-hda";
- reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
- reg-names = "hda-reg", "video-dacs-ctrl";
- clock-names = "pix",
- "hddac",
- "main_parent",
- "aux_parent";
- clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
- <&clk_s_d2_flexgen CLK_HDDAC>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/st/stih410-b2120.dts b/arch/arm/boot/dts/st/stih410-b2120.dts
deleted file mode 100644
index 538ff98..0000000
--- a/arch/arm/boot/dts/st/stih410-b2120.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Peter Griffin <peter.griffin@linaro.org>
- */
-/dts-v1/;
-#include "stih410.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
- model = "STiH410 B2120";
- compatible = "st,stih410-b2120", "st,stih410";
-
- chosen {
- stdout-path = &sbc_serial0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x80000000>;
- };
-
- aliases {
- serial0 = &sbc_serial0;
- ethernet0 = ðernet0;
- };
-
- usb2_picophy1: phy2 {
- status = "okay";
- };
-
- usb2_picophy2: phy3 {
- status = "okay";
- };
-
- soc {
-
- mmc0: sdhci@9060000 {
- max-frequency = <200000000>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- sd-uhs-ddr50;
- };
-
- ohci0: usb@9a03c00 {
- status = "okay";
- };
-
- ehci0: usb@9a03e00 {
- status = "okay";
- };
-
- ohci1: usb@9a83c00 {
- status = "okay";
- };
-
- ehci1: usb@9a83e00 {
- status = "okay";
- };
-
- sti-display-subsystem@0 {
- sti-hda@8d02000 {
- status = "okay";
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi b/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
deleted file mode 100644
index 8d9a2df..0000000
--- a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-#include <dt-bindings/clock/stih407-clks.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/media/c8sectpfe.h>
-/ {
- leds {
- compatible = "gpio-leds";
- led-red {
- label = "Front Panel LED";
- gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- led-green {
- gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- sound: sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "STI-B2120";
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- simple-audio-card,dai-link@0 {
- reg = <0>;
- /* HDMI */
- format = "i2s";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player0>;
- };
-
- codec {
- sound-dai = <&sti_hdmi>;
- };
- };
-
- simple-audio-card,dai-link@1 {
- reg = <1>;
- /* DAC */
- format = "i2s";
- mclk-fs = <256>;
- frame-inversion;
- cpu {
- sound-dai = <&sti_uni_player2>;
- };
-
- codec {
- sound-dai = <&sti_sasg_codec 1>;
- };
- };
-
- simple-audio-card,dai-link@2 {
- reg = <2>;
- /* SPDIF */
- format = "left_j";
- mclk-fs = <128>;
- cpu {
- sound-dai = <&sti_uni_player3>;
- };
-
- codec {
- sound-dai = <&sti_sasg_codec 0>;
- };
- };
- };
-
- miphy28lp_phy: miphy28lp {
-
- phy_port0: port@9b22000 {
- st,osc-rdy;
- };
-
- phy_port1: port@9b2a000 {
- st,osc-force-ext;
- };
- };
-
- soc {
- sbc_serial0: serial@9530000 {
- status = "okay";
- };
-
- pwm0: pwm@9810000 {
- status = "okay";
- };
-
- pwm1: pwm@9510000 {
- status = "okay";
- };
-
- ssc2: i2c@9842000 {
- status = "okay";
- clock-frequency = <100000>;
- st,i2c-min-scl-pulse-width-us = <0>;
- st,i2c-min-sda-pulse-width-us = <5>;
- };
-
- ssc3: i2c@9843000 {
- status = "okay";
- clock-frequency = <100000>;
- st,i2c-min-scl-pulse-width-us = <0>;
- st,i2c-min-sda-pulse-width-us = <5>;
- };
-
- i2c@9844000 {
- status = "okay";
- };
-
- i2c@9845000 {
- status = "okay";
- };
-
- i2c@9540000 {
- status = "okay";
- };
-
- mmc0: sdhci@9060000 {
- non-removable;
- status = "okay";
- };
-
- mmc1: sdhci@9080000 {
- status = "okay";
- };
-
- /* SSC11 to HDMI */
- hdmiddc: i2c@9541000 {
- status = "okay";
- /* HDMI V1.3a supports Standard mode only */
- clock-frequency = <100000>;
- st,i2c-min-scl-pulse-width-us = <0>;
- st,i2c-min-sda-pulse-width-us = <5>;
- };
-
- st_dwc3: dwc3@8f94000 {
- status = "okay";
- };
-
- ethernet0: dwmac@9630000 {
- st,tx-retime-src = "clkgen";
- status = "okay";
- phy-mode = "rgmii";
- fixed-link = <0 1 1000 0 0>;
- };
-
- demux@8a20000 {
- compatible = "st,stih407-c8sectpfe";
- status = "okay";
- reg = <0x08a20000 0x10000>,
- <0x08a00000 0x4000>;
- reg-names = "c8sectpfe", "c8sectpfe-ram";
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "c8sectpfe-error-irq",
- "c8sectpfe-idle-irq";
- pinctrl-0 = <&pinctrl_tsin0_serial>;
- pinctrl-1 = <&pinctrl_tsin0_parallel>;
- pinctrl-2 = <&pinctrl_tsin3_serial>;
- pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
- pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
- pinctrl-names = "tsin0-serial",
- "tsin0-parallel",
- "tsin3-serial",
- "tsin4-serial",
- "tsin5-serial";
- clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
- clock-names = "c8sectpfe";
-
- /* tsin0 is TSA on NIMA */
- tsin0: port {
- tsin-num = <0>;
- serial-not-parallel;
- i2c-bus = <&ssc2>;
- reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
- dvb-card = <STV0367_TDA18212_NIMA_1>;
- };
- };
-
- sti_uni_player0: sti-uni-player@8d80000 {
- status = "okay";
- };
-
- sti_uni_player2: sti-uni-player@8d82000 {
- status = "okay";
- };
-
- sti_uni_player3: sti-uni-player@8d85000 {
- status = "okay";
- };
-
- syscfg_core: core-syscfg@92b0000 {
- sti_sasg_codec: sti-sasg-codec {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spdif_out>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ace9495..fd730aa 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -954,6 +954,13 @@ dts: thermal@50028000 {
status = "disabled";
};
+ hdp: pinctrl@5002a000 {
+ compatible = "st,stm32mp131-hdp";
+ reg = <0x5002a000 0x400>;
+ clocks = <&rcc HDP>;
+ status = "disabled";
+ };
+
mdma: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
@@ -1602,11 +1609,13 @@ ethernet1: ethernet@5800a000 {
"mac-clk-tx",
"mac-clk-rx",
"ethstp",
+ "ptp_ref",
"eth-ck";
clocks = <&rcc ETH1MAC>,
<&rcc ETH1TX>,
<&rcc ETH1RX>,
<&rcc ETH1STP>,
+ <&rcc ETH1PTP_K>,
<&rcc ETH1CK_K>;
st,syscon = <&syscfg 0x4 0xff0000>;
snps,mixed-burst;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index 4958313..053fc66 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -81,11 +81,13 @@ ethernet2: ethernet@5800e000 {
"mac-clk-tx",
"mac-clk-rx",
"ethstp",
+ "ptp_ref",
"eth-ck";
clocks = <&rcc ETH2MAC>,
<&rcc ETH2TX>,
<&rcc ETH2RX>,
<&rcc ETH2STP>,
+ <&rcc ETH2PTP_K>,
<&rcc ETH2CK_K>;
st,syscon = <&syscfg 0x4 0xff000000>;
snps,mixed-burst;
diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
index 40605ea..8613a6a 100644
--- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
@@ -5,6 +5,14 @@
*/
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+&hdp {
+ /omit-if-no-ref/
+ hdp2_gpo: hdp2-pins {
+ function = "gpoval2";
+ pins = "HDP2";
+ };
+};
+
&pinctrl {
/omit-if-no-ref/
adc1_ain_pins_a: adc1-ain-0 {
@@ -732,6 +740,23 @@ pins {
};
/omit-if-no-ref/
+ hdp2_pins_a: hdp2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 13, AF0)>; /* HDP2 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ /omit-if-no-ref/
+ hdp2_sleep_pins_a: hdp2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 13, ANALOG)>; /* HDP2 */
+ };
+ };
+
+ /omit-if-no-ref/
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -1305,6 +1330,20 @@ pins {
};
/omit-if-no-ref/
+ m4_leds_orange_pins_a: m4-leds-orange-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 7, RSVD)>;
+ };
+ };
+
+ /omit-if-no-ref/
+ m4_leds_orange_pins_b: m4-leds-orange-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 8, RSVD)>;
+ };
+ };
+
+ /omit-if-no-ref/
mco1_pins_a: mco1-0 {
pins {
pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index 0daa8ff..b1b568d 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -270,6 +270,13 @@ dts: thermal@50028000 {
status = "disabled";
};
+ hdp: pinctrl@5002a000 {
+ compatible = "st,stm32mp151-hdp";
+ reg = <0x5002a000 0x400>;
+ clocks = <&rcc HDP>;
+ status = "disabled";
+ };
+
mdma1: dma-controller@58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
index 39a3211..5d219a4 100644
--- a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
+++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
@@ -239,7 +239,7 @@ &i2s1 {
i2s1_port: port {
i2s1_endpoint: endpoint {
- format = "i2s";
+ dai-format = "i2s";
mclk-fs = <256>;
remote-endpoint = <&codec_endpoint>;
};
@@ -255,7 +255,7 @@ &m4_rproc {
/delete-property/ st,syscfg-holdboot;
resets = <&scmi_reset RST_SCMI_MCU>,
<&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
- reset-names = "mcu_rst", "hold_boot";
+ reset-names = "mcu_rst", "hold_boot";
};
&mdma1 {
diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi
index 4640daf..92794b9 100644
--- a/arch/arm/boot/dts/st/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp153.dtsi
@@ -40,6 +40,7 @@ m_can1: can@4400e000 {
interrupt-names = "int0", "int1";
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
+ resets = <&rcc FDCAN_R>;
bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
access-controllers = <&etzpc 62>;
status = "disabled";
@@ -54,6 +55,7 @@ m_can2: can@4400f000 {
interrupt-names = "int0", "int1";
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
+ resets = <&rcc FDCAN_R>;
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
access-controllers = <&etzpc 62>;
status = "disabled";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 1b34fbe..1ec3b8f 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -45,7 +45,6 @@ panel@0 {
reg = <0>;
reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
power-supply = <&v3v3>;
- status = "okay";
port {
panel_in: endpoint {
@@ -63,6 +62,12 @@ &dsi_out {
remote-endpoint = <&panel_in>;
};
+&hdp {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hdp2_gpo &hdp2_pins_a>;
+ pinctrl-1 = <&hdp2_sleep_pins_a>;
+};
+
&i2c1 {
touchscreen@38 {
compatible = "focaltech,ft6236";
@@ -71,7 +76,6 @@ touchscreen@38 {
interrupt-parent = <&gpiof>;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
- status = "okay";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index 9cf5ed1..f6c478d 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -328,6 +328,8 @@ &m4_rproc {
<&vdev0vring1>, <&vdev0buffer>;
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
mbox-names = "vq0", "vq1", "shutdown", "detach";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m4_leds_orange_pins_b>;
interrupt-parent = <&exti>;
interrupts = <68 1>;
status = "okay";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
index ac42d46..2531f4b 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
@@ -92,7 +92,7 @@ gpu_reserved: gpu@f8000000 {
leds: leds {
compatible = "gpio-leds";
- led0{
+ led0 {
label = "buzzer";
gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
index 43375c4d..8fa61e5 100644
--- a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
@@ -51,7 +51,6 @@ panel@0 {
reg = <0>;
reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
power-supply = <&scmi_v3v3>;
- status = "okay";
port {
panel_in: endpoint {
@@ -77,7 +76,6 @@ touchscreen@38 {
interrupt-parent = <&gpiof>;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
- status = "okay";
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index be0c355..154698f 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -262,7 +262,7 @@ &i2c5 {
status = "okay";
usbhub: usbhub@2c {
- compatible ="microchip,usb2514b";
+ compatible = "microchip,usb2514b";
reg = <0x2c>;
vdd-supply = <&v3v3>;
reset-gpios = <&gpiob 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index abe2dfe..52c4e69 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -62,7 +62,6 @@ &i2c2 {
pinctrl-0 = <&i2c2_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
- status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 0fb4e55..5c77202 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -20,7 +20,6 @@ display_bl: display-bl {
default-brightness-level = <8>;
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
power-supply = <®_panel_bl>;
- status = "okay";
};
gpio-keys-polled {
@@ -135,7 +134,6 @@ sound {
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias";
dais = <&sai2a_port &sai2b_port>;
- status = "okay";
};
};
@@ -150,7 +148,6 @@ &i2c2 { /* Header X22 */
pinctrl-0 = <&i2c2_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
- status = "okay";
/* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
index 142d4a8..4cc6336 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@@ -269,7 +269,6 @@ pmic: stpmic@33 {
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
- status = "okay";
regulators {
compatible = "st,stpmic1-regulators";
@@ -388,7 +387,6 @@ onkey {
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
interrupt-names = "onkey-falling", "onkey-rising";
power-off-time-sec = <10>;
- status = "okay";
};
watchdog {
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 46692d8..8cea6fa 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -479,6 +479,8 @@ &m4_rproc {
<&vdev0vring1>, <&vdev0buffer>;
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
mbox-names = "vq0", "vq1", "shutdown", "detach";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m4_leds_orange_pins_a>;
interrupt-parent = <&exti>;
interrupts = <68 1>;
status = "okay";
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
index ae2e8df..ea47f99 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
@@ -269,7 +269,7 @@ &tps {
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
- ti,en-ck32k-xtal = <1>;
+ ti,en-ck32k-xtal;
regulators {
vrtc_reg: regulator@0 {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
index 06767ea..ece7f78 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
@@ -483,8 +483,6 @@ &mcasp1 {
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
- /* 16 serializers */
- num-serializer = <16>;
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
index fd91a3c..06a352f9 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
@@ -143,7 +143,7 @@ &i2c1 {
sgtl5000: sgtl5000@a {
compatible = "fsl,sgtl5000";
- reg =<0xa>;
+ reg = <0xa>;
clocks = <&clk12m>;
micbias-resistor-k-ohms = <4>;
micbias-voltage-m-volts = <2250>;
@@ -155,7 +155,7 @@ sgtl5000: sgtl5000@a {
tda9988: tda9988@70 {
compatible = "nxp,tda998x";
- reg =<0x70>;
+ reg = <0x70>;
audio-ports = <TDA998x_I2S 1>;
#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
index 757ebd9..f3524e5 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
@@ -109,7 +109,7 @@ clocks {
audio_mclk_fixed: oscillator@0 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <24576000>; /* 24.576MHz */
+ clock-frequency = <24576000>; /* 24.576MHz */
};
audio_mclk: audio_mclk_gate@0 {
diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
index d6a143a..18ad52e9 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
@@ -200,7 +200,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x9000 0x1000>;
uart0: serial@0 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
+ compatible = "ti,am3352-uart";
clock-frequency = <48000000>;
reg = <0x0 0x1000>;
interrupts = <72>;
@@ -1108,7 +1108,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x22000 0x1000>;
uart1: serial@0 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
+ compatible = "ti,am3352-uart";
clock-frequency = <48000000>;
reg = <0x0 0x1000>;
interrupts = <73>;
@@ -1139,7 +1139,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0x24000 0x1000>;
uart2: serial@0 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
+ compatible = "ti,am3352-uart";
clock-frequency = <48000000>;
reg = <0x0 0x1000>;
interrupts = <74>;
@@ -1457,10 +1457,10 @@ SYSC_OMAP2_SOFTRESET |
gpio1: gpio@0 {
compatible = "ti,omap4-gpio";
- gpio-ranges = <&am33xx_pinmux 0 0 8>,
- <&am33xx_pinmux 8 90 4>,
- <&am33xx_pinmux 12 12 16>,
- <&am33xx_pinmux 28 30 4>;
+ gpio-ranges = <&am33xx_pinmux 0 0 8>,
+ <&am33xx_pinmux 8 90 4>,
+ <&am33xx_pinmux 12 12 16>,
+ <&am33xx_pinmux 28 30 4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -1770,7 +1770,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xa6000 0x1000>;
uart3: serial@0 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
+ compatible = "ti,am3352-uart";
clock-frequency = <48000000>;
reg = <0x0 0x1000>;
interrupts = <44>;
@@ -1799,7 +1799,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xa8000 0x1000>;
uart4: serial@0 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
+ compatible = "ti,am3352-uart";
clock-frequency = <48000000>;
reg = <0x0 0x1000>;
interrupts = <45>;
@@ -1828,7 +1828,7 @@ SYSC_OMAP2_SOFTRESET |
ranges = <0x0 0xaa000 0x1000>;
uart5: serial@0 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
+ compatible = "ti,am3352-uart";
clock-frequency = <48000000>;
reg = <0x0 0x1000>;
interrupts = <46>;
diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
index 0614ffd..43ec2a9 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
@@ -461,10 +461,10 @@ &cppi41dma 26 1 &cppi41dma 27 1
cppi41dma: dma-controller@2000 {
compatible = "ti,am3359-cppi41";
- reg = <0x0000 0x1000>,
- <0x2000 0x1000>,
- <0x3000 0x1000>,
- <0x4000 0x4000>;
+ reg = <0x0000 0x1000>,
+ <0x2000 0x1000>,
+ <0x3000 0x1000>,
+ <0x4000 0x4000>;
reg-names = "glue", "controller", "scheduler", "queuemgr";
interrupts = <17>;
interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
index 994e69a..87b61a9 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
@@ -149,7 +149,7 @@ led3 {
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
- gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
diff --git a/arch/arm/boot/dts/ti/omap/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
index a8cd724..27d1f35 100644
--- a/arch/arm/boot/dts/ti/omap/dm814x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
@@ -155,10 +155,10 @@ &cppi41dma 26 1 &cppi41dma 27 1
cppi41dma: dma-controller@47402000 {
compatible = "ti,am3359-cppi41";
- reg = <0x47400000 0x1000
- 0x47402000 0x1000
- 0x47403000 0x1000
- 0x47404000 0x4000>;
+ reg = <0x47400000 0x1000>,
+ <0x47402000 0x1000>,
+ <0x47403000 0x1000>,
+ <0x47404000 0x4000>;
reg-names = "glue", "controller", "scheduler", "queuemgr";
interrupts = <17>;
interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
index b68686f..407d7bc 100644
--- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
@@ -643,10 +643,10 @@ &cppi41dma 26 1 &cppi41dma 27 1
cppi41dma: dma-controller@47402000 {
compatible = "ti,am3359-cppi41";
- reg = <0x47400000 0x1000
- 0x47402000 0x1000
- 0x47403000 0x1000
- 0x47404000 0x4000>;
+ reg = <0x47400000 0x1000>,
+ <0x47402000 0x1000>,
+ <0x47403000 0x1000>,
+ <0x47404000 0x4000>;
reg-names = "glue", "controller", "scheduler", "queuemgr";
interrupts = <17>;
interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index ba7fdaa..c9282f5 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -267,8 +267,8 @@ usb2_phy1: phy@4000 {
syscon-phy-power = <&scm_conf 0x300>;
clocks = <&usb_phy1_always_on_clk32k>,
<&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
- clock-names = "wkupclk",
- "refclk";
+ clock-names = "wkupclk",
+ "refclk";
#phy-cells = <0>;
};
@@ -279,8 +279,8 @@ usb2_phy2: phy@5000 {
syscon-phy-power = <&scm_conf 0xe74>;
clocks = <&usb_phy2_always_on_clk32k>,
<&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
- clock-names = "wkupclk",
- "refclk";
+ clock-names = "wkupclk",
+ "refclk";
#phy-cells = <0>;
};
@@ -294,9 +294,9 @@ usb3_phy1: phy@4400 {
clocks = <&usb_phy3_always_on_clk32k>,
<&sys_clkin1>,
<&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
- clock-names = "wkupclk",
- "sysclk",
- "refclk";
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
#phy-cells = <0>;
};
};
diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
index f747ac5..1d2df81 100644
--- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
@@ -83,10 +83,10 @@ lp8733: lp8733@60 {
compatible = "ti,lp8733";
reg = <0x60>;
- buck0-in-supply =<&vsys_3v3>;
- buck1-in-supply =<&vsys_3v3>;
- ldo0-in-supply =<&evm_5v0>;
- ldo1-in-supply =<&evm_5v0>;
+ buck0-in-supply = <&vsys_3v3>;
+ buck1-in-supply = <&vsys_3v3>;
+ ldo0-in-supply = <&evm_5v0>;
+ ldo1-in-supply = <&evm_5v0>;
lp8733_regulators: regulators {
lp8733_buck0_reg: buck0 {
@@ -131,10 +131,10 @@ lp8732: lp8732@61 {
compatible = "ti,lp8732";
reg = <0x61>;
- buck0-in-supply =<&vsys_3v3>;
- buck1-in-supply =<&vsys_3v3>;
- ldo0-in-supply =<&vsys_3v3>;
- ldo1-in-supply =<&vsys_3v3>;
+ buck0-in-supply = <&vsys_3v3>;
+ buck1-in-supply = <&vsys_3v3>;
+ ldo0-in-supply = <&vsys_3v3>;
+ ldo1-in-supply = <&vsys_3v3>;
lp8732_regulators: regulators {
lp8732_buck0_reg: buck0 {
diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
index 07d5894..910e3b5 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
@@ -275,8 +275,8 @@ filesystem@680000 {
ethernet@6,0 {
compatible = "davicom,dm9000";
- reg = <6 0x000 2>,
- <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+ reg = <6 0x000 2>,
+ <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
bank-width = <2>;
interrupt-parent = <&gpio1>;
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
index a7f99ae..78c6574 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
@@ -65,7 +65,7 @@ ads7846@0 {
ti,debounce-max = /bits/ 16 <10>;
ti,debounce-tol = /bits/ 16 <5>;
ti,debounce-rep = /bits/ 16 <1>;
- ti,keep-vref-on = <1>;
+ ti,keep-vref-on;
ti,settle-delay-usec = /bits/ 16 <150>;
wakeup-source;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
index 07bec48..959fdee 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
@@ -57,8 +57,8 @@ &mmc1_pins
&mmc1_aux_pins
>;
- wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
- cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+ wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
+ cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
};
&dss {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
index b535d24..b550105 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
@@ -467,7 +467,7 @@ &mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
- eth@0 {
+ ethernet@0 {
pinctrl-names = "default";
pinctrl-0 = <&ks8851_pins>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
index cadc7e0..80e89a2 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
@@ -194,7 +194,7 @@ &mcspi1 {
pinctrl-0 = <&mcspi1_pins>;
status = "okay";
- eth@0 {
+ ethernet@0 {
compatible = "ks8851";
pinctrl-names = "default";
pinctrl-0 = <&ks8851_irq_pins>;
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index cc0e0e4..12f706e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -87,10 +87,6 @@
CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8916=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_INTEL_SOCFPGA=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 1a80602..70489f3 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -498,7 +498,6 @@
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_GPIO_VBUS=m
CONFIG_USB_ISP1301=m
CONFIG_USB_GADGET=m
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index ec52cce..fa681a7 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -10,9 +10,6 @@
CONFIG_KALLSYMS_ALL=y
CONFIG_PROFILING=y
CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MDM9615=y
CONFIG_SMP=y
CONFIG_ARM_PSCI=y
@@ -187,7 +184,6 @@
CONFIG_USB_OTG=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
CONFIG_USB_ACM=y
CONFIG_USB_DWC3=y
CONFIG_USB_CHIPIDEA=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index a37e6ac..967b1cb 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -11,7 +11,6 @@
# CONFIG_BLK_DEV_BSG is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EEPROM_AT24=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 0f55815e..9c8dc6dd 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -40,7 +40,7 @@
CONFIG_CAIF=y
CONFIG_NFC=m
CONFIG_NFC_HCI=m
-CONFIG_NFC_SHDLC=m
+CONFIG_NFC_SHDLC=y
CONFIG_NFC_PN544_I2C=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index b3842c9..e58699e 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -19,31 +19,13 @@
select PL310_ERRATA_769419 if CACHE_L2X0
select RESET_CONTROLLER
help
- Include support for STMicroelectronics' STiH415/416, STiH407/10 and
+ Include support for STMicroelectronics' STiH407/10 and
STiH418 family SoCs using the Device Tree for discovery. More
information can be found in Documentation/arch/arm/sti/ and
Documentation/devicetree.
if ARCH_STI
-config SOC_STIH415
- bool "STiH415 STMicroelectronics Consumer Electronics family"
- default y
- help
- This enables support for STMicroelectronics Digital Consumer
- Electronics family StiH415 parts, primarily targeted at set-top-box
- and other digital audio/video applications using Flattned Device
- Trees.
-
-config SOC_STIH416
- bool "STiH416 STMicroelectronics Consumer Electronics family"
- default y
- help
- This enables support for STMicroelectronics Digital Consumer
- Electronics family StiH416 parts, primarily targeted at set-top-box
- and other digital audio/video applications using Flattened Device
- Trees.
-
config SOC_STIH407
bool "STiH407 STMicroelectronics Consumer Electronics family"
default y
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 488084b..1aaf611 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -10,8 +10,6 @@
#include "smp.h"
static const char *const stih41x_dt_match[] __initconst = {
- "st,stih415",
- "st,stih416",
"st,stih407",
"st,stih410",
"st,stih418",
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index a88f5ad..959f79d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -40,6 +40,13 @@
This enables support for Apple's in-house ARM SoC family, such
as the Apple M1.
+config ARCH_ARTPEC
+ bool "Axis Communications ARTPEC SoC Family"
+ depends on ARCH_EXYNOS
+ select ARM_GIC
+ help
+ This enables support for the ARMv8 based ARTPEC SoC Family.
+
config ARCH_AXIADO
bool "Axiado SoC Family"
select GPIOLIB
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 780aeba0..2edfa7b 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -41,6 +41,7 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
new file mode 100644
index 0000000..b2275eb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "X96Q";
+ compatible = "amediatech,x96q", "allwinner,sun50i-h616";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&codec {
+ allwinner,audio-routing = "Line Out", "LINEOUT";
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdca>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+/* TODO: EMAC1 connected to AC200 PHY */
+
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+};
+
+&mmc0 {
+ /* microSD */
+ vmmc-supply = <®_aldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* TODO: XRadio XR819 WLAN @ mmc1 */
+
+&mmc2 {
+ /* eMMC */
+ vmmc-supply = <®_aldo1>;
+ vqmmc-supply = <®_bldo1>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <100000000>; /* required for stable operation */
+ bus-width = <8>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp305: pmic@36 {
+ compatible = "x-powers,axp305", "x-powers,axp805",
+ "x-powers,axp806";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x36>;
+
+ x-powers,self-working-mode;
+ vina-supply = <®_vcc5v>;
+ vinb-supply = <®_vcc5v>;
+ vinc-supply = <®_vcc5v>;
+ vind-supply = <®_vcc5v>;
+ vine-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ dcdcb {
+ /* unused */
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-dram";
+ };
+
+ dcdce {
+ /* unused */
+ };
+
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3";
+ };
+
+ aldo2 {
+ /* unused */
+ };
+
+ aldo3 {
+ /* unused */
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ bldo2 {
+ /* unused */
+ };
+
+ bldo3 {
+ /* unused */
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ cldo1 {
+ /* unused */
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host"; /* USB A type receptacle */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 6b6f229..7b36c47 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -4,8 +4,10 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
@@ -624,6 +626,8 @@ r_ccu: clock-controller@7010000 {
"pll-audio";
#clock-cells = <1>;
#reset-cells = <1>;
+ assigned-clocks = <&r_ccu CLK_R_AHB>, <&r_ccu CLK_R_APB0>;
+ assigned-clock-rates = <200000000>, <100000000>;
};
nmi_intc: interrupt-controller@7010320 {
@@ -690,5 +694,42 @@ rtc: rtc@7090000 {
clock-names = "bus", "hosc", "ahb";
#clock-cells = <1>;
};
+
+ mcu_ccu: clock-controller@7102000 {
+ compatible = "allwinner,sun55i-a523-mcu-ccu";
+ reg = <0x7102000 0x200>;
+ clocks = <&osc24M>,
+ <&rtc CLK_OSC32K>,
+ <&rtc CLK_IOSC>,
+ <&ccu CLK_PLL_AUDIO0_4X>,
+ <&ccu CLK_PLL_PERIPH0_300M>,
+ <&ccu CLK_DSP>,
+ <&ccu CLK_MBUS>,
+ <&r_ccu CLK_R_AHB>,
+ <&r_ccu CLK_R_APB0>;
+ clock-names = "hosc",
+ "losc",
+ "iosc",
+ "pll-audio0-4x",
+ "pll-periph0-300m",
+ "dsp",
+ "mbus",
+ "r-ahb",
+ "r-apb0";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ npu: npu@7122000 {
+ compatible = "vivante,gc";
+ reg = <0x07122000 0x1000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mcu_ccu CLK_BUS_MCU_NPU_ACLK>,
+ <&ccu CLK_NPU>,
+ <&mcu_ccu CLK_BUS_MCU_NPU_HCLK>;
+ clock-names = "bus", "core", "reg";
+ resets = <&mcu_ccu RST_BUS_MCU_NPU>;
+ power-domains = <&ppu PD_NPU>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
index 553ad77..f82a8d1 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -6,6 +6,7 @@
#include "sun55i-a523.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
/ {
model = "Radxa Cubie A5E";
@@ -20,11 +21,28 @@ chosen {
stdout-path = "serial0:115200n8";
};
- ext_osc32k: ext-osc32k-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "ext_osc32k";
+ leds {
+ compatible = "gpio-leds";
+
+ power-led {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ use-led {
+ function = LED_FUNCTION_ACTIVITY;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&axp717_adc 3>, /* vsys_v */
+ <&axp717_adc 4>; /* pmic_temp */
};
reg_vcc5v: vcc5v {
@@ -75,6 +93,9 @@ &mdio0 {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+ reset-assert-us = <10000>;
+ reset-deassert-us = <150000>;
};
};
@@ -125,6 +146,17 @@ axp717: pmic@34 {
bldoin-supply = <®_vcc5v>;
cldoin-supply = <®_vcc5v>;
+ axp717_adc: adc {
+ compatible = "x-powers,axp717-adc";
+ #io-channel-cells = <1>;
+ };
+
+ battery-power {
+ compatible = "x-powers,axp717-battery-power-supply";
+ /* charger mode design but has no battery terminal */
+ status = "disabled";
+ };
+
regulators {
/* Supplies the "little" cluster (1.4 GHz cores) */
reg_dcdc1: dcdc1 {
@@ -228,6 +260,10 @@ reg_cpusldo: cpusldo {
regulator-name = "vdd-cpus";
};
};
+
+ usb-power {
+ compatible = "x-powers,axp717-usb-power-supply";
+ };
};
axp323: pmic@36 {
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
index b9eeb67..1b054fa 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
@@ -27,6 +27,12 @@ ext_osc32k: ext-osc32k-clk {
clock-output-names = "ext_osc32k";
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&axp717_adc 3>, /* vsys_v */
+ <&axp717_adc 4>; /* pmic_temp */
+ };
+
reg_vcc12v: vcc12v {
/* DC input jack */
compatible = "regulator-fixed";
@@ -85,6 +91,9 @@ &mdio0 {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+ reset-assert-us = <10000>;
+ reset-deassert-us = <150000>;
};
};
@@ -146,6 +155,17 @@ axp717: pmic@35 {
bldoin-supply = <®_vcc5v>;
cldoin-supply = <®_vcc5v>;
+ axp717_adc: adc {
+ compatible = "x-powers,axp717-adc";
+ #io-channel-cells = <1>;
+ };
+
+ battery-power {
+ compatible = "x-powers,axp717-battery-power-supply";
+ /* no battery; output used for dcdc4 instead */
+ status = "disabled";
+ };
+
regulators {
/* Supplies the "little" cluster (1.4 GHz cores) */
reg_dcdc1: dcdc1 {
@@ -252,6 +272,12 @@ reg_cpusldo: cpusldo {
regulator-name = "vdd-cpus";
};
};
+
+ usb-power {
+ compatible = "x-powers,axp717-usb-power-supply";
+ /* 12V-5V buck converter can supply up to 5A */
+ input-current-limit-microamp = <3250000>;
+ };
};
axp323: pmic@36 {
@@ -306,6 +332,14 @@ &r_pio {
vcc-pm-supply = <®_aldo3>;
};
+&rtc {
+ clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+ <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+ clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+ assigned-clocks = <&rtc CLK_OSC32K>;
+ assigned-clock-rates = <32768>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
index d07bb91..39a4e19 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
@@ -40,6 +40,13 @@ led {
};
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&axp717_adc 3>, /* vsys_v */
+ <&axp717_adc 4>, /* pmic_temp */
+ <&axp717_adc 7>; /* bkup_batt_v */
+ };
+
wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */
@@ -174,6 +181,17 @@ axp717: pmic@35 {
bldoin-supply = <®_vcc5v>;
cldoin-supply = <®_vcc5v>;
+ axp717_adc: adc {
+ compatible = "x-powers,axp717-adc";
+ #io-channel-cells = <1>;
+ };
+
+ battery-power {
+ compatible = "x-powers,axp717-battery-power-supply";
+ /* no battery; output used for dcdc4 instead */
+ status = "disabled";
+ };
+
regulators {
/* Supplies the "little" cluster (1.4 GHz cores) */
reg_dcdc1: dcdc1 {
@@ -288,6 +306,11 @@ reg_cpusldo: cpusldo {
regulator-name = "vdd-cpus-usb-0v9";
};
};
+
+ usb-power {
+ compatible = "x-powers,axp717-usb-power-supply";
+ input-current-limit-microamp = <3000000>;
+ };
};
axp323: pmic@36 {
@@ -346,6 +369,14 @@ &r_pio {
vcc-pm-supply = <®_bldo2>;
};
+&rtc {
+ clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+ <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+ clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+ assigned-clocks = <&rtc CLK_OSC32K>;
+ assigned-clock-rates = <32768>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index 5a72f0b..f49209f 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -123,6 +123,7 @@ gic: interrupt-controller@f0200000 {
<0x0 0xf0120000 0x0 0x2000>; /* GICH */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
};
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index dea60d1..bd35e0e 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -320,6 +320,7 @@ soc {
gic: interrupt-controller@f0800000 {
compatible = "arm,gic-v3";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0xf0800000 0 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index 563bc2e..fce4593 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -17,6 +17,13 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -24,6 +31,13 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -31,6 +45,13 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -38,6 +59,22 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x80000>; /* L2. 512 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index cb9ea3c..07aaaf7 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -23,6 +23,13 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -30,6 +37,22 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x7d000>; /* L2. 512 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
@@ -53,6 +76,13 @@ xtal: xtal-clk {
#clock-cells = <0>;
};
+ xtal_32k: xtal-clk-32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xtal_32k";
+ #clock-cells = <0>;
+ };
+
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
@@ -792,7 +822,7 @@ spicc1: spi@52000 {
pwm_mn: pwm@54000 {
compatible = "amlogic,c3-pwm",
"amlogic,meson-s4-pwm";
- reg = <0x0 54000 0x0 0x24>;
+ reg = <0x0 0x54000 0x0 0x24>;
clocks = <&clkc_periphs CLKID_PWM_M>,
<&clkc_periphs CLKID_PWM_N>;
#pwm-cells = <3>;
@@ -967,6 +997,15 @@ nand: nand-controller@8d000 {
clock-names = "core", "device";
status = "disabled";
};
+
+ rtc@9a000 {
+ compatible = "amlogic,c3-rtc",
+ "amlogic,a5-rtc";
+ reg = <0x0 0x9a000 0x0 0x38>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal_32k>, <&clkc_periphs CLKID_SYS_RTC>;
+ clock-names = "osc", "sys";
+ };
};
ethmac: ethernet@fdc00000 {
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
index 260918b..d262c0b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -18,6 +18,13 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a55";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
cpu1: cpu@100 {
@@ -25,6 +32,13 @@ cpu1: cpu@100 {
compatible = "arm,cortex-a55";
reg = <0x0 0x100>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
cpu2: cpu@200 {
@@ -32,6 +46,13 @@ cpu2: cpu@200 {
compatible = "arm,cortex-a55";
reg = <0x0 0x200>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
cpu3: cpu@300 {
@@ -39,8 +60,23 @@ cpu3: cpu@300 {
compatible = "arm,cortex-a55";
reg = <0x0 0x300>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2>;
};
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x40000>; /* L2. 256 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
};
timer {
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index ec743ca..6510068 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -53,6 +53,13 @@ cpu100: cpu@100 {
compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
};
cpu101: cpu@101 {
@@ -60,6 +67,13 @@ cpu101: cpu@101 {
compatible = "arm,cortex-a53";
reg = <0x0 0x101>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
};
cpu102: cpu@102 {
@@ -67,6 +81,13 @@ cpu102: cpu@102 {
compatible = "arm,cortex-a53";
reg = <0x0 0x102>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
};
cpu103: cpu@103 {
@@ -74,6 +95,13 @@ cpu103: cpu@103 {
compatible = "arm,cortex-a53";
reg = <0x0 0x103>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
};
cpu0: cpu@0 {
@@ -81,6 +109,13 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a73";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <64>;
+ d-cache-size = <0x10000>;
+ d-cache-sets = <64>;
+ i-cache-line-size = <64>;
+ i-cache-size = <0x10000>;
+ i-cache-sets = <64>;
+ next-level-cache = <&l2_cache_b>;
};
cpu1: cpu@1 {
@@ -88,6 +123,13 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a73";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <64>;
+ d-cache-size = <0x10000>;
+ d-cache-sets = <64>;
+ i-cache-line-size = <64>;
+ i-cache-size = <0x10000>;
+ i-cache-sets = <64>;
+ next-level-cache = <&l2_cache_b>;
};
cpu2: cpu@2 {
@@ -95,6 +137,13 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a73";
reg = <0x0 0x2>;
enable-method = "psci";
+ d-cache-line-size = <64>;
+ d-cache-size = <0x10000>;
+ d-cache-sets = <64>;
+ i-cache-line-size = <64>;
+ i-cache-size = <0x10000>;
+ i-cache-sets = <64>;
+ next-level-cache = <&l2_cache_b>;
};
cpu3: cpu@3 {
@@ -102,6 +151,31 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a73";
reg = <0x0 0x3>;
enable-method = "psci";
+ d-cache-line-size = <64>;
+ d-cache-size = <0x10000>;
+ d-cache-sets = <64>;
+ i-cache-line-size = <64>;
+ i-cache-size = <0x10000>;
+ i-cache-sets = <64>;
+ next-level-cache = <&l2_cache_b>;
+ };
+
+ l2_cache_l: l2-cache-cluster0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x40000>; /* L2. 256 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ l2_cache_b: l2-cache-cluster1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x100000>; /* L2. 1 Mb */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index f7f25a1..27b68ed 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -27,6 +27,12 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -36,6 +42,12 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -44,6 +56,9 @@ l2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x80000>; /* L2. 512 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 2df143aa..04fb130 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -83,6 +83,12 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
dynamic-power-coefficient = <140>;
@@ -94,6 +100,12 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
dynamic-power-coefficient = <140>;
@@ -105,6 +117,12 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
dynamic-power-coefficient = <140>;
@@ -115,6 +133,9 @@ l2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x80000>; /* L2. 512 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index deee61d..1321ad95 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -17,6 +17,12 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -26,6 +32,12 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -35,6 +47,12 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -44,6 +62,12 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -52,6 +76,9 @@ l2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x80000>; /* L2. 512 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 86e6ceb..f04efa8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -49,7 +49,13 @@ cpu0: cpu@0 {
reg = <0x0 0x0>;
enable-method = "psci";
capacity-dmips-mhz = <592>;
- next-level-cache = <&l2>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
#cooling-cells = <2>;
};
@@ -59,7 +65,13 @@ cpu1: cpu@1 {
reg = <0x0 0x1>;
enable-method = "psci";
capacity-dmips-mhz = <592>;
- next-level-cache = <&l2>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
#cooling-cells = <2>;
};
@@ -69,7 +81,13 @@ cpu100: cpu@100 {
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
#cooling-cells = <2>;
};
@@ -79,7 +97,13 @@ cpu101: cpu@101 {
reg = <0x0 0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
+ next-level-cache = <&l2_cache_l>;
#cooling-cells = <2>;
};
@@ -89,7 +113,13 @@ cpu102: cpu@102 {
reg = <0x0 0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
+ d-cache-line-size = <64>;
+ d-cache-size = <0x10000>;
+ d-cache-sets = <64>;
+ i-cache-line-size = <64>;
+ i-cache-size = <0x10000>;
+ i-cache-sets = <64>;
+ next-level-cache = <&l2_cache_b>;
#cooling-cells = <2>;
};
@@ -99,14 +129,32 @@ cpu103: cpu@103 {
reg = <0x0 0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- next-level-cache = <&l2>;
+ d-cache-line-size = <64>;
+ d-cache-size = <0x10000>;
+ d-cache-sets = <64>;
+ i-cache-line-size = <64>;
+ i-cache-size = <0x10000>;
+ i-cache-sets = <64>;
+ next-level-cache = <&l2_cache_b>;
#cooling-cells = <2>;
};
- l2: l2-cache0 {
+ l2_cache_l: l2-cache-cluster0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x40000>; /* L2. 256 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ l2_cache_b: l2-cache-cluster1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x100000>; /* L2. 1MB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 7d99ca4..c1d8e81d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -95,6 +95,12 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
#cooling-cells = <2>;
@@ -105,6 +111,12 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
#cooling-cells = <2>;
@@ -115,6 +127,12 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
#cooling-cells = <2>;
@@ -125,6 +143,12 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
#cooling-cells = <2>;
@@ -134,6 +158,9 @@ l2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x80000>; /* L2. 512 KB */
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 959bd8d..12e26f9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -348,10 +348,6 @@ &sd_emmc_b {
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-ddr50;
max-frequency = <100000000>;
disable-wp;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 411cc31..514c9be 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -64,6 +64,12 @@ cpu4: cpu@100 {
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
@@ -75,6 +81,12 @@ cpu5: cpu@101 {
reg = <0x0 0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
@@ -86,6 +98,12 @@ cpu6: cpu@102 {
reg = <0x0 0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
@@ -97,6 +115,12 @@ cpu7: cpu@103 {
reg = <0x0 0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 538b3503..5e07f0f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -380,11 +380,10 @@ &sd_emmc_b {
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <50000000>;
+ /* Boot failures are observed at 50MHz */
+ max-frequency = <35000000>;
disable-wp;
- /* TOFIX: SD card is barely usable in SDR modes */
-
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&tflash_vdd>;
vqmmc-supply = <&vddio_c>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 966ebb1..e5db8ce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -55,6 +55,12 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a55";
reg = <0x0 0x0>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -64,6 +70,12 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a55";
reg = <0x0 0x1>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -73,6 +85,12 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a55";
reg = <0x0 0x2>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -82,6 +100,12 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a55";
reg = <0x0 0x3>;
enable-method = "psci";
+ d-cache-line-size = <32>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <32>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
@@ -90,6 +114,9 @@ l2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x40000>; /* L2. 256 KB */
+ cache-line-size = <64>;
+ cache-sets = <256>;
};
};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 5a64239..5bbedb0 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -22,7 +22,6 @@ cpu@0 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
- #clock-cells = <1>;
clocks = <&pmd0clk 0>;
};
cpu@1 {
@@ -32,7 +31,6 @@ cpu@1 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
- #clock-cells = <1>;
clocks = <&pmd0clk 0>;
};
cpu@100 {
@@ -42,7 +40,6 @@ cpu@100 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
- #clock-cells = <1>;
clocks = <&pmd1clk 0>;
};
cpu@101 {
@@ -52,7 +49,6 @@ cpu@101 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
- #clock-cells = <1>;
clocks = <&pmd1clk 0>;
};
cpu@200 {
@@ -62,7 +58,6 @@ cpu@200 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
- #clock-cells = <1>;
clocks = <&pmd2clk 0>;
};
cpu@201 {
@@ -72,7 +67,6 @@ cpu@201 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
- #clock-cells = <1>;
clocks = <&pmd2clk 0>;
};
cpu@300 {
@@ -82,7 +76,6 @@ cpu@300 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
- #clock-cells = <1>;
clocks = <&pmd3clk 0>;
};
cpu@301 {
@@ -92,7 +85,6 @@ cpu@301 {
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
- #clock-cells = <1>;
clocks = <&pmd3clk 0>;
};
xgene_L2_0: l2-cache-0 {
@@ -211,9 +203,9 @@ v2m15: v2m@f0000 {
};
};
- refclk: refclk {
+ refclk: clock-100000000 {
compatible = "fixed-clock";
- #clock-cells = <1>;
+ #clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "refclk";
};
@@ -232,6 +224,16 @@ timer {
clock-frequency = <50000000>;
};
+ i2cslimpro {
+ compatible = "apm,xgene-slimpro-i2c";
+ mboxes = <&mailbox 0>;
+ };
+
+ hwmonslimpro {
+ compatible = "apm,xgene-slimpro-hwmon";
+ mboxes = <&mailbox 7>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -246,7 +248,7 @@ clocks {
pmdpll: pmdpll@170000f0 {
compatible = "apm,xgene-pcppll-v2-clock";
#clock-cells = <1>;
- clocks = <&refclk 0>;
+ clocks = <&refclk>;
reg = <0x0 0x170000f0 0x0 0x10>;
clock-output-names = "pmdpll";
};
@@ -286,7 +288,7 @@ pmd3clk: pmd3clk@7e200230 {
socpll: socpll@17000120 {
compatible = "apm,xgene-socpll-v2-clock";
#clock-cells = <1>;
- clocks = <&refclk 0>;
+ clocks = <&refclk>;
reg = <0x0 0x17000120 0x0 0x1000>;
clock-output-names = "socpll";
};
@@ -585,16 +587,6 @@ mailbox: mailbox@10540000 {
0x0 0x7 0x4>;
};
- i2cslimpro {
- compatible = "apm,xgene-slimpro-i2c";
- mboxes = <&mailbox 0>;
- };
-
- hwmonslimpro {
- compatible = "apm,xgene-slimpro-hwmon";
- mboxes = <&mailbox 7>;
- };
-
serial0: serial@10600000 {
compatible = "ns16550";
reg = <0 0x10600000 0x0 0x1000>;
@@ -617,7 +609,7 @@ usb0: usb@19000000 {
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
- compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+ compatible = "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -643,7 +635,7 @@ pcie0: pcie@1f2b0000 {
pcie1: pcie@1f2c0000 {
status = "disabled";
device_type = "pci";
- compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+ compatible = "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 872093b0..4ca0ead 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -103,6 +103,7 @@ xgene_L2_3: l2-cache-3 {
gic: interrupt-controller@78010000 {
compatible = "arm,cortex-a15-gic";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */
@@ -112,9 +113,9 @@ gic: interrupt-controller@78010000 {
interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
};
- refclk: refclk {
+ refclk: clock-100000000 {
compatible = "fixed-clock";
- #clock-cells = <1>;
+ #clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "refclk";
};
@@ -133,6 +134,16 @@ pmu {
interrupts = <1 12 0xff04>;
};
+ i2cslimpro {
+ compatible = "apm,xgene-slimpro-i2c";
+ mboxes = <&mailbox 0>;
+ };
+
+ hwmonslimpro {
+ compatible = "apm,xgene-slimpro-hwmon";
+ mboxes = <&mailbox 7>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -148,28 +159,25 @@ clocks {
pcppll: pcppll@17000100 {
compatible = "apm,xgene-pcppll-clock";
#clock-cells = <1>;
- clocks = <&refclk 0>;
+ clocks = <&refclk>;
clock-names = "pcppll";
reg = <0x0 0x17000100 0x0 0x1000>;
clock-output-names = "pcppll";
- type = <0>;
};
socpll: socpll@17000120 {
compatible = "apm,xgene-socpll-clock";
#clock-cells = <1>;
- clocks = <&refclk 0>;
+ clocks = <&refclk>;
clock-names = "socpll";
reg = <0x0 0x17000120 0x0 0x1000>;
clock-output-names = "socpll";
- type = <1>;
};
socplldiv2: socplldiv2 {
compatible = "fixed-factor-clock";
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&socpll 0>;
- clock-names = "socplldiv2";
clock-mult = <1>;
clock-div = <2>;
clock-output-names = "socplldiv2";
@@ -178,7 +186,7 @@ socplldiv2: socplldiv2 {
ahbclk: ahbclk@17000000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "div-reg";
divider-offset = <0x164>;
@@ -190,7 +198,7 @@ ahbclk: ahbclk@17000000 {
sdioclk: sdioclk@1f2ac000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f2ac000 0x0 0x1000
0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg", "div-reg";
@@ -207,7 +215,7 @@ sdioclk: sdioclk@1f2ac000 {
ethclk: ethclk {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
clock-names = "ethclk";
reg = <0x0 0x17000000 0x0 0x1000>;
reg-names = "div-reg";
@@ -229,7 +237,7 @@ menetclk: menetclk {
sge0clk: sge0clk@1f21c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f21c000 0x0 0x1000>;
reg-names = "csr-reg";
csr-mask = <0xa>;
@@ -240,7 +248,7 @@ sge0clk: sge0clk@1f21c000 {
xge0clk: xge0clk@1f61c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f61c000 0x0 0x1000>;
reg-names = "csr-reg";
csr-mask = <0x3>;
@@ -251,7 +259,7 @@ xge1clk: xge1clk@1f62c000 {
compatible = "apm,xgene-device-clock";
status = "disabled";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f62c000 0x0 0x1000>;
reg-names = "csr-reg";
csr-mask = <0x3>;
@@ -261,7 +269,7 @@ xge1clk: xge1clk@1f62c000 {
sataphy1clk: sataphy1clk@1f21c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f21c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sataphy1clk";
@@ -275,7 +283,7 @@ sataphy1clk: sataphy1clk@1f21c000 {
sataphy2clk: sataphy1clk@1f22c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f22c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sataphy2clk";
@@ -289,7 +297,7 @@ sataphy2clk: sataphy1clk@1f22c000 {
sataphy3clk: sataphy1clk@1f23c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f23c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sataphy3clk";
@@ -303,7 +311,7 @@ sataphy3clk: sataphy1clk@1f23c000 {
sata01clk: sata01clk@1f21c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f21c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sata01clk";
@@ -316,7 +324,7 @@ sata01clk: sata01clk@1f21c000 {
sata23clk: sata23clk@1f22c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f22c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sata23clk";
@@ -329,7 +337,7 @@ sata23clk: sata23clk@1f22c000 {
sata45clk: sata45clk@1f23c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f23c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sata45clk";
@@ -342,7 +350,7 @@ sata45clk: sata45clk@1f23c000 {
rtcclk: rtcclk@17000000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg";
csr-offset = <0xc>;
@@ -355,7 +363,7 @@ rtcclk: rtcclk@17000000 {
rngpkaclk: rngpkaclk@17000000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x17000000 0x0 0x2000>;
reg-names = "csr-reg";
csr-offset = <0xc>;
@@ -369,7 +377,7 @@ pcie0clk: pcie0clk@1f2bc000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f2bc000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie0clk";
@@ -379,7 +387,7 @@ pcie1clk: pcie1clk@1f2cc000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f2cc000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie1clk";
@@ -389,7 +397,7 @@ pcie2clk: pcie2clk@1f2dc000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f2dc000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie2clk";
@@ -399,7 +407,7 @@ pcie3clk: pcie3clk@1f50c000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f50c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie3clk";
@@ -409,7 +417,7 @@ pcie4clk: pcie4clk@1f51c000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f51c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie4clk";
@@ -418,7 +426,7 @@ pcie4clk: pcie4clk@1f51c000 {
dmaclk: dmaclk@1f27c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
- clocks = <&socplldiv2 0>;
+ clocks = <&socplldiv2>;
reg = <0x0 0x1f27c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "dmaclk";
@@ -760,16 +768,6 @@ mailbox: mailbox@10540000 {
<0x0 0x7 0x4>;
};
- i2cslimpro {
- compatible = "apm,xgene-slimpro-i2c";
- mboxes = <&mailbox 0>;
- };
-
- hwmonslimpro {
- compatible = "apm,xgene-slimpro-hwmon";
- mboxes = <&mailbox 7>;
- };
-
serial0: serial@1c020000 {
status = "disabled";
compatible = "ns16550a";
@@ -849,7 +847,6 @@ i2c0: i2c@10512000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x10512000 0x0 0x1000>;
interrupts = <0 0x44 0x4>;
- #clock-cells = <1>;
clocks = <&ahbclk 0>;
};
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index 4f337bf..4eebcd8 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -79,6 +79,15 @@
dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j180d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j414s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j414c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j416s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j416c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j474s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j475c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j475d.dtb
dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j415.dtb
dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/s5l8960x.dtsi b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
index 5b5175d..462ffdd 100644
--- a/arch/arm64/boot/dts/apple/s5l8960x.dtsi
+++ b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
@@ -89,6 +89,62 @@ serial0: serial@20a0a0000 {
status = "disabled";
};
+ i2c0: i2c@20a110000 {
+ compatible = "apple,s5l8960x-i2c", "apple,i2c";
+ reg = <0x2 0x0a110000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 154 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20a111000 {
+ compatible = "apple,s5l8960x-i2c", "apple,i2c";
+ reg = <0x2 0x0a111000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 155 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20a112000 {
+ compatible = "apple,s5l8960x-i2c", "apple,i2c";
+ reg = <0x2 0x0a112000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 156 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@20a113000 {
+ compatible = "apple,s5l8960x-i2c", "apple,i2c";
+ reg = <0x2 0x0a113000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 157 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmgr: power-management@20e000000 {
compatible = "apple,s5l8960x-pmgr", "apple,pmgr", "syscon", "simple-mfd";
#address-cells = <1>;
@@ -140,6 +196,26 @@ pinctrl: pinctrl@20e300000 {
<AIC_IRQ 112 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(81, 1)>,
+ <APPLE_PINMUX(80, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(83, 1)>,
+ <APPLE_PINMUX(82, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(101, 1)>,
+ <APPLE_PINMUX(100, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(172, 1)>,
+ <APPLE_PINMUX(171, 1)>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3.dtsi b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
index 09db4ed..bb38662 100644
--- a/arch/arm64/boot/dts/apple/s800-0-3.dtsi
+++ b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -88,6 +88,48 @@ serial0: serial@20a0c0000 {
status = "disabled";
};
+ i2c0: i2c@20a110000 {
+ compatible = "apple,s8000-i2c", "apple,i2c";
+ reg = <0x2 0x0a110000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 206 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20a111000 {
+ compatible = "apple,s8000-i2c", "apple,i2c";
+ reg = <0x2 0x0a111000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 207 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20a112000 {
+ compatible = "apple,s8000-i2c", "apple,i2c";
+ reg = <0x2 0x0a112000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 208 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmgr: power-management@20e000000 {
compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
#address-cells = <1>;
@@ -131,6 +173,21 @@ pinctrl_ap: pinctrl@20f100000 {
<AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(46, 1)>,
+ <APPLE_PINMUX(45, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(115, 1)>,
+ <APPLE_PINMUX(114, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(23, 1)>,
+ <APPLE_PINMUX(22, 1)>;
+ };
};
pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/s8001.dtsi b/arch/arm64/boot/dts/apple/s8001.dtsi
index fee3507..b5b00dc 100644
--- a/arch/arm64/boot/dts/apple/s8001.dtsi
+++ b/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -137,6 +137,62 @@ serial0: serial@20a0c0000 {
status = "disabled";
};
+ i2c0: i2c@20a110000 {
+ compatible = "apple,s8000-i2c", "apple,i2c";
+ reg = <0x2 0x0a110000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20a111000 {
+ compatible = "apple,s8000-i2c", "apple,i2c";
+ reg = <0x2 0x0a111000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20a112000 {
+ compatible = "apple,s8000-i2c", "apple,i2c";
+ reg = <0x2 0x0a112000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@20a113000 {
+ compatible = "apple,s8000-i2c", "apple,i2c";
+ reg = <0x2 0x0a113000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmgr: power-management@20e000000 {
compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
#address-cells = <1>;
@@ -173,6 +229,26 @@ pinctrl_ap: pinctrl@20f100000 {
<AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(165, 1)>,
+ <APPLE_PINMUX(164, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(178, 1)>,
+ <APPLE_PINMUX(177, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(132, 1)>,
+ <APPLE_PINMUX(131, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(115, 1)>,
+ <APPLE_PINMUX(114, 1)>;
+ };
};
pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
index c9e1928..1430b91 100644
--- a/arch/arm64/boot/dts/apple/t6000-j314s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -16,3 +16,11 @@ / {
compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
};
+
+&wifi0 {
+ brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
index ff1803c..da0cbe7 100644
--- a/arch/arm64/boot/dts/apple/t6000-j316s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -16,3 +16,11 @@ / {
compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
};
+
+&wifi0 {
+ brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
index 1761d15..c37097d 100644
--- a/arch/arm64/boot/dts/apple/t6001-j314c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -16,3 +16,11 @@ / {
compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
};
+
+&wifi0 {
+ brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
index 750e9be..3bc6e0c 100644
--- a/arch/arm64/boot/dts/apple/t6001-j316c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -16,3 +16,11 @@ / {
compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
};
+
+&wifi0 {
+ brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
index 62ea437..2e7c237 100644
--- a/arch/arm64/boot/dts/apple/t6001-j375c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -16,3 +16,11 @@ / {
compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
model = "Apple Mac Studio (M1 Max, 2022)";
};
+
+&wifi0 {
+ brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,okinawa";
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
index 3365429..2b7f801 100644
--- a/arch/arm64/boot/dts/apple/t6002-j375d.dts
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -38,6 +38,14 @@ hpm5: usb-pd@3a {
};
};
+&wifi0 {
+ brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,okinawa";
+};
+
/* delete unused always-on power-domains on die 1 */
/delete-node/ &ps_atc2_usb_aon_die1;
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
index 1563b3c..3603b27 100644
--- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -24,6 +24,41 @@ aic: interrupt-controller@28e100000 {
power-domains = <&ps_aic>;
};
+ smc: smc@290400000 {
+ compatible = "apple,t6000-smc", "apple,smc";
+ reg = <0x2 0x90400000 0x0 0x4000>,
+ <0x2 0x91e00000 0x0 0x100000>;
+ reg-names = "smc", "sram";
+ mboxes = <&smc_mbox>;
+
+ smc_gpio: gpio {
+ compatible = "apple,smc-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ smc_reboot: reboot {
+ compatible = "apple,smc-reboot";
+ nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+ <&boot_error_count>, <&panic_count>;
+ nvmem-cell-names = "shutdown_flag", "boot_stage",
+ "boot_error_count", "panic_count";
+ };
+ };
+
+ smc_mbox: mbox@290408000 {
+ compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x2 0x90408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 754 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 755 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 756 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 757 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
pinctrl_smc: pinctrl@290820000 {
compatible = "apple,t6000-pinctrl", "apple,pinctrl";
reg = <0x2 0x90820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
index 22ebc78..c0aac59 100644
--- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -13,6 +13,7 @@
/ {
aliases {
+ bluetooth0 = &bluetooth0;
serial0 = &serial0;
wifi0 = &wifi0;
};
@@ -99,9 +100,18 @@ &port00 {
/* WLAN */
bus-range = <1 1>;
wifi0: wifi@0,0 {
+ compatible = "pci14e4,4433";
reg = <0x10000 0x0 0x0 0x0 0x0>;
/* To be filled by the loader */
local-mac-address = [00 10 18 00 00 10];
+ apple,antenna-sku = "XX";
+ };
+
+ bluetooth0: bluetooth@0,1 {
+ compatible = "pci14e4,5f71";
+ reg = <0x10100 0x0 0x0 0x0 0x0>;
+ /* To be filled by the loader */
+ local-bd-address = [00 00 00 00 00 00];
};
};
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
index d5b985a..c0fb93a 100644
--- a/arch/arm64/boot/dts/apple/t600x-j375.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -11,6 +11,8 @@
/ {
aliases {
+ bluetooth0 = &bluetooth0;
+ ethernet0 = ðernet0;
serial0 = &serial0;
wifi0 = &wifi0;
};
@@ -84,9 +86,18 @@ &port00 {
/* WLAN */
bus-range = <1 1>;
wifi0: wifi@0,0 {
+ compatible = "pci14e4,4433";
reg = <0x10000 0x0 0x0 0x0 0x0>;
/* To be filled by the loader */
local-mac-address = [00 10 18 00 00 10];
+ apple,antenna-sku = "XX";
+ };
+
+ bluetooth0: bluetooth@0,1 {
+ compatible = "pci14e4,5f71";
+ reg = <0x10100 0x0 0x0 0x0 0x0>;
+ /* To be filled by the loader */
+ local-bd-address = [00 00 00 00 00 00];
};
};
diff --git a/arch/arm64/boot/dts/apple/t6020-j414s.dts b/arch/arm64/boot/dts/apple/t6020-j414s.dts
new file mode 100644
index 0000000..631c54c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j414s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Pro, 2023)
+ *
+ * target-type: J414s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+ compatible = "apple,j414s", "apple,t6020", "apple,arm-platform";
+ model = "Apple MacBook Pro (14-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+ brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j416s.dts b/arch/arm64/boot/dts/apple/t6020-j416s.dts
new file mode 100644
index 0000000..c277ed5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j416s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Pro, 2023)
+ *
+ * target-type: J416s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+ compatible = "apple,j416s", "apple,t6020", "apple,arm-platform";
+ model = "Apple MacBook Pro (16-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+ brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j474s.dts b/arch/arm64/boot/dts/apple/t6020-j474s.dts
new file mode 100644
index 0000000..7c7ad5b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j474s.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023)
+ *
+ * target-type: J474s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+
+/*
+ * This model is very similar to M1 and M2 Mac Studio models so base it on those
+ * and remove the missing SDHCI controller.
+ */
+
+#include "t602x-j474-j475.dtsi"
+
+/ {
+ compatible = "apple,j474s", "apple,t6020", "apple,arm-platform";
+ model = "Apple Mac mini (M2 Pro, 2023)";
+};
+
+/* PCIe devices */
+&wifi0 {
+ compatible = "pci14e4,4434";
+ brcm,board-type = "apple,tasmania";
+};
+
+&bluetooth0 {
+ compatible = "pci14e4,5f72";
+ brcm,board-type = "apple,tasmania";
+};
+
+/*
+ * port01 is unused, remove the PCIe sdhci0 node from t600x-j375.dtsi and adjust
+ * the iommu-map.
+ */
+/delete-node/ &sdhci0;
+
+&pcie0 {
+ iommu-map = <0x100 &pcie0_dart_0 1 1>,
+ <0x200 &pcie0_dart_2 1 1>,
+ <0x300 &pcie0_dart_3 1 1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t6020.dtsi b/arch/arm64/boot/dts/apple/t6020.dtsi
new file mode 100644
index 0000000..bffa66a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6020 "M2 Pro" SoC
+ *
+ * Other names: H14J, "Rhodes Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6021, so include it and disable the missing parts */
+
+#include "t6021.dtsi"
+
+/ {
+ compatible = "apple,t6020", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
+
+&gpu {
+ compatible = "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j414c.dts b/arch/arm64/boot/dts/apple/t6021-j414c.dts
new file mode 100644
index 0000000..cdcf074
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j414c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Max, 2023)
+ *
+ * target-type: J414c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+ compatible = "apple,j414c", "apple,t6021", "apple,arm-platform";
+ model = "Apple MacBook Pro (14-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+ brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j416c.dts b/arch/arm64/boot/dts/apple/t6021-j416c.dts
new file mode 100644
index 0000000..6d8146b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j416c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Max, 2022)
+ *
+ * target-type: J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+ compatible = "apple,j416c", "apple,t6021", "apple,arm-platform";
+ model = "Apple MacBook Pro (16-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+ brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+ brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j475c.dts b/arch/arm64/boot/dts/apple/t6021-j475c.dts
new file mode 100644
index 0000000..533e357
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j475c.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Max, 2023)
+ *
+ * target-type: J475c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j474-j475.dtsi"
+
+/ {
+ compatible = "apple,j475c", "apple,t6021", "apple,arm-platform";
+ model = "Apple Mac Studio (M2 Max, 2023)";
+};
+
+&wifi0 {
+ compatible = "pci14e4,4434";
+ brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+ compatible = "pci14e4,5f72";
+ brcm,board-type = "apple,canary";
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+ status = "okay";
+};
+
+&pcie0_dart_1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021.dtsi b/arch/arm64/boot/dts/apple/t6021.dtsi
new file mode 100644
index 0000000..62907ad
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6021 "M2 Max" SoC
+ *
+ * Other names: H14J, "Rhodes"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+ compatible = "apple,t6021", "apple,arm-platform";
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges;
+ nonposted-mmio;
+
+ // filled via templated includes at the end of the file
+ };
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+ #include "t602x-die0.dtsi"
+ #include "t602x-dieX.dtsi"
+ #include "t602x-nvme.dtsi"
+};
+
+#include "t602x-gpio-pins.dtsi"
+#include "t602x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+ affinities {
+ e-core-pmu-affinity {
+ apple,fiq-index = <AIC_CPU_PMU_E>;
+ cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03>;
+ };
+
+ p-core-pmu-affinity {
+ apple,fiq-index = <AIC_CPU_PMU_P>;
+ cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+ &cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+ };
+ };
+};
+
+&gpu {
+ compatible = "apple,agx-g14c", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-j180d.dts b/arch/arm64/boot/dts/apple/t6022-j180d.dts
new file mode 100644
index 0000000..dca6bd1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j180d.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023)
+ *
+ * target-type: J180d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+ compatible = "apple,j180d", "apple,t6022", "apple,arm-platform";
+ model = "Apple Mac Pro (M2 Ultra, 2023)";
+ aliases {
+ nvram = &nvram;
+ serial0 = &serial0;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0";
+
+ framebuffer0: framebuffer@0 {
+ compatible = "apple,simple-framebuffer", "simple-framebuffer";
+ reg = <0 0 0 0>; /* To be filled by loader */
+ /* Format properties will be added by loader */
+ status = "disabled";
+ power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+ };
+ };
+
+ memory@10000000000 {
+ device_type = "memory";
+ reg = <0x100 0 0x2 0>; /* To be filled by loader */
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+/* USB Type C Rear */
+&i2c0 {
+ hpm2: usb-pd@3b {
+ compatible = "apple,cd321x";
+ reg = <0x3b>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+
+ hpm3: usb-pd@3c {
+ compatible = "apple,cd321x";
+ reg = <0x3c>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+
+ /* hpm4 and hpm5 included from t6022-jxxxd.dtsi */
+
+ hpm6: usb-pd@3d {
+ compatible = "apple,cd321x";
+ reg = <0x3d>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+
+ hpm7: usb-pd@3e {
+ compatible = "apple,cd321x";
+ reg = <0x3e>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+};
+
+/* USB Type C Front */
+&i2c3 {
+ status = "okay";
+
+ hpm0: usb-pd@38 {
+ compatible = "apple,cd321x";
+ reg = <0x38>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+
+ hpm1: usb-pd@3f {
+ compatible = "apple,cd321x";
+ reg = <0x3f>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+};
+
+/*
+ * Delete unused PCIe nodes, the Mac Pro uses slightly different PCIe
+ * controllers with a single port connected to a PM40100 PCIe switch
+ */
+/delete-node/ &pcie0;
+/delete-node/ &pcie0_dart_0;
+/delete-node/ &pcie0_dart_1;
+/delete-node/ &pcie0_dart_2;
+/delete-node/ &pcie0_dart_3;
+
+&nco_clkref {
+ clock-frequency = <1068000000>;
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t6022-j475d.dts b/arch/arm64/boot/dts/apple/t6022-j475d.dts
new file mode 100644
index 0000000..7365945
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j475d.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Ultra, 2023)
+ *
+ * target-type: J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t602x-j474-j475.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+ compatible = "apple,j475d", "apple,t6022", "apple,arm-platform";
+ model = "Apple Mac Studio (M2 Ultra, 2023)";
+};
+
+&framebuffer0 {
+ power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+ status = "okay";
+};
+
+&pcie0_dart_1 {
+ status = "okay";
+};
+
+&wifi0 {
+ compatible = "pci14e4,4434";
+ brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+ compatible = "pci14e4,5f72";
+ brcm,board-type = "apple,canary";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
new file mode 100644
index 0000000..4f7bf2e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023) and Mac Studio (M2 Ultra, 2023)
+ *
+ * This file contains the parts common to J180 and J475 devices with t6022.
+ *
+ * target-type: J180d / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* delete power-domains for missing disp0 / disp0_die1 */
+/delete-node/ &ps_disp0_cpu0;
+/delete-node/ &ps_disp0_fe;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
+
+/* USB Type C */
+&i2c0 {
+ /* front-right */
+ hpm4: usb-pd@39 {
+ compatible = "apple,cd321x";
+ reg = <0x39>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+
+ /* front-left */
+ hpm5: usb-pd@3a {
+ compatible = "apple,cd321x";
+ reg = <0x3a>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+};
diff --git a/arch/arm64/boot/dts/apple/t6022.dtsi b/arch/arm64/boot/dts/apple/t6022.dtsi
new file mode 100644
index 0000000..e73bf2f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022.dtsi
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6022 "M2 Ultra" SoC
+ *
+ * Other names: H14J, "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+ compatible = "apple,t6022", "apple,arm-platform";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ cpu-map {
+ cluster3 {
+ core0 {
+ cpu = <&cpu_e10>;
+ };
+ core1 {
+ cpu = <&cpu_e11>;
+ };
+ core2 {
+ cpu = <&cpu_e12>;
+ };
+ core3 {
+ cpu = <&cpu_e13>;
+ };
+ };
+
+ cluster4 {
+ core0 {
+ cpu = <&cpu_p20>;
+ };
+ core1 {
+ cpu = <&cpu_p21>;
+ };
+ core2 {
+ cpu = <&cpu_p22>;
+ };
+ core3 {
+ cpu = <&cpu_p23>;
+ };
+ };
+
+ cluster5 {
+ core0 {
+ cpu = <&cpu_p30>;
+ };
+ core1 {
+ cpu = <&cpu_p31>;
+ };
+ core2 {
+ cpu = <&cpu_p32>;
+ };
+ core3 {
+ cpu = <&cpu_p33>;
+ };
+ };
+ };
+
+ cpu_e10: cpu@800 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x800>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_3>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e_die1>;
+ };
+
+ cpu_e11: cpu@801 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x801>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_3>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e_die1>;
+ };
+
+ cpu_e12: cpu@802 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x802>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_3>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e_die1>;
+ };
+
+ cpu_e13: cpu@803 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x803>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_3>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e_die1>;
+ };
+
+ cpu_p20: cpu@10900 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10900>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_4>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0_die1>;
+ };
+
+ cpu_p21: cpu@10901 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10901>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_4>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0_die1>;
+ };
+
+ cpu_p22: cpu@10902 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10902>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_4>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0_die1>;
+ };
+
+ cpu_p23: cpu@10903 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10903>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_4>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0_die1>;
+ };
+
+ cpu_p30: cpu@10a00 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10a00>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_5>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1_die1>;
+ };
+
+ cpu_p31: cpu@10a01 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10a01>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_5>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1_die1>;
+ };
+
+ cpu_p32: cpu@10a02 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10a02>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_5>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1_die1>;
+ };
+
+ cpu_p33: cpu@10a03 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10a03>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_5>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1_die1>;
+ };
+
+ l2_cache_3: l2-cache-3 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x400000>;
+ };
+
+ l2_cache_4: l2-cache-4 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x1000000>;
+ };
+
+ l2_cache_5: l2-cache-5 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x1000000>;
+ };
+ };
+
+ die0: soc@200000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x02 0x00000000 0x02 0x00000000 0x4 0x00000000>,
+ <0x05 0x80000000 0x05 0x80000000 0x1 0x80000000>,
+ <0x07 0x00000000 0x07 0x00000000 0xf 0x80000000>,
+ <0x16 0x80000000 0x16 0x80000000 0x5 0x80000000>;
+ nonposted-mmio;
+ /* Required to get >32-bit DMA via DARTs */
+ dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+ // filled via templated includes at the end of the file
+ };
+
+ die1: soc@2200000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x02 0x00000000 0x22 0x00000000 0x4 0x00000000>,
+ <0x07 0x00000000 0x27 0x00000000 0xf 0x80000000>,
+ <0x16 0x80000000 0x36 0x80000000 0x5 0x80000000>;
+ nonposted-mmio;
+ /* Required to get >32-bit DMA via DARTs */
+ dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+ // filled via templated includes at the end of the file
+ };
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+ #include "t602x-die0.dtsi"
+ #include "t602x-dieX.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+#include "t602x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+ #include "t602x-dieX.dtsi"
+ #include "t602x-nvme.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+
+/delete-node/ &ps_pmp_die1;
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+ affinities {
+ e-core-pmu-affinity {
+ apple,fiq-index = <AIC_CPU_PMU_E>;
+ cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03
+ &cpu_e10 &cpu_e11 &cpu_e12 &cpu_e13>;
+ };
+
+ p-core-pmu-affinity {
+ apple,fiq-index = <AIC_CPU_PMU_P>;
+ cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+ &cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+ &cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+ &cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+ };
+ };
+};
+
+&ps_gfx {
+ // On t6022, the die0 GPU power domain needs both AFR power domains
+ power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
+
+&gpu {
+ compatible = "apple,agx-g14d", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-common.dtsi b/arch/arm64/boot/dts/apple/t602x-common.dtsi
new file mode 100644
index 0000000..9c800a3
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-common.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes common to all T602x family SoCs (M2 Pro/Max/Ultra)
+ *
+ * Other names: H14J, "Rhodes Chop", "Rhodes", "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ gpu = &gpu;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu_e00>;
+ };
+ core1 {
+ cpu = <&cpu_e01>;
+ };
+ core2 {
+ cpu = <&cpu_e02>;
+ };
+ core3 {
+ cpu = <&cpu_e03>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu_p00>;
+ };
+ core1 {
+ cpu = <&cpu_p01>;
+ };
+ core2 {
+ cpu = <&cpu_p02>;
+ };
+ core3 {
+ cpu = <&cpu_p03>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&cpu_p10>;
+ };
+ core1 {
+ cpu = <&cpu_p11>;
+ };
+ core2 {
+ cpu = <&cpu_p12>;
+ };
+ core3 {
+ cpu = <&cpu_p13>;
+ };
+ };
+ };
+
+ cpu_e00: cpu@0 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_0>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e>;
+ };
+
+ cpu_e01: cpu@1 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_0>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e>;
+ };
+
+ cpu_e02: cpu@2 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_0>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e>;
+ };
+
+ cpu_e03: cpu@3 {
+ compatible = "apple,blizzard";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* to be filled by loader */
+ next-level-cache = <&l2_cache_0>;
+ i-cache-size = <0x20000>;
+ d-cache-size = <0x10000>;
+ operating-points-v2 = <&blizzard_opp>;
+ capacity-dmips-mhz = <756>;
+ performance-domains = <&cpufreq_e>;
+ };
+
+ cpu_p00: cpu@10100 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_1>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0>;
+ };
+
+ cpu_p01: cpu@10101 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_1>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0>;
+ };
+
+ cpu_p02: cpu@10102 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10102>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_1>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0>;
+ };
+
+ cpu_p03: cpu@10103 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10103>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_1>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p0>;
+ };
+
+ cpu_p10: cpu@10200 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_2>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1>;
+ };
+
+ cpu_p11: cpu@10201 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_2>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1>;
+ };
+
+ cpu_p12: cpu@10202 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10202>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_2>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1>;
+ };
+
+ cpu_p13: cpu@10203 {
+ compatible = "apple,avalanche";
+ device_type = "cpu";
+ reg = <0x0 0x10203>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ next-level-cache = <&l2_cache_2>;
+ i-cache-size = <0x30000>;
+ d-cache-size = <0x20000>;
+ operating-points-v2 = <&avalanche_opp>;
+ capacity-dmips-mhz = <1024>;
+ performance-domains = <&cpufreq_p1>;
+ };
+
+ l2_cache_0: l2-cache-0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x400000>;
+ };
+
+ l2_cache_1: l2-cache-1 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x1000000>;
+ };
+
+ l2_cache_2: l2-cache-2 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x1000000>;
+ };
+ };
+
+ blizzard_opp: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ /* pstate #1 is a dummy clone of #2 */
+ opp02 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-level = <2>;
+ clock-latency-ns = <7700>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1284000000>;
+ opp-level = <3>;
+ clock-latency-ns = <25000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1752000000>;
+ opp-level = <4>;
+ clock-latency-ns = <33000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <2004000000>;
+ opp-level = <5>;
+ clock-latency-ns = <38000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <2256000000>;
+ opp-level = <6>;
+ clock-latency-ns = <44000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <2424000000>;
+ opp-level = <7>;
+ clock-latency-ns = <48000>;
+ };
+ };
+
+ avalanche_opp: opp-table-1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp01 {
+ opp-hz = /bits/ 64 <702000000>;
+ opp-level = <1>;
+ clock-latency-ns = <7400>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <948000000>;
+ opp-level = <2>;
+ clock-latency-ns = <18000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1188000000>;
+ opp-level = <3>;
+ clock-latency-ns = <21000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1452000000>;
+ opp-level = <4>;
+ clock-latency-ns = <24000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1704000000>;
+ opp-level = <5>;
+ clock-latency-ns = <28000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1968000000>;
+ opp-level = <6>;
+ clock-latency-ns = <31000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-level = <7>;
+ clock-latency-ns = <33000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <2400000000>;
+ opp-level = <8>;
+ clock-latency-ns = <45000>;
+ };
+ opp09 {
+ opp-hz = /bits/ 64 <2568000000>;
+ opp-level = <9>;
+ clock-latency-ns = <47000>;
+ };
+ opp10 {
+ opp-hz = /bits/ 64 <2724000000>;
+ opp-level = <10>;
+ clock-latency-ns = <50000>;
+ };
+ opp11 {
+ opp-hz = /bits/ 64 <2868000000>;
+ opp-level = <11>;
+ clock-latency-ns = <52000>;
+ };
+ opp12 {
+ opp-hz = /bits/ 64 <3000000000>;
+ opp-level = <12>;
+ clock-latency-ns = <57000>;
+ };
+ opp13 {
+ opp-hz = /bits/ 64 <3132000000>;
+ opp-level = <13>;
+ clock-latency-ns = <60000>;
+ };
+ opp14 {
+ opp-hz = /bits/ 64 <3264000000>;
+ opp-level = <14>;
+ clock-latency-ns = <64000>;
+ };
+ opp15 {
+ opp-hz = /bits/ 64 <3360000000>;
+ opp-level = <15>;
+ clock-latency-ns = <64000>;
+ turbo-mode;
+ };
+ opp16 {
+ opp-hz = /bits/ 64 <3408000000>;
+ opp-level = <16>;
+ clock-latency-ns = <64000>;
+ turbo-mode;
+ };
+ opp17 {
+ opp-hz = /bits/ 64 <3504000000>;
+ opp-level = <17>;
+ clock-latency-ns = <64000>;
+ turbo-mode;
+ };
+ };
+
+ pmu-e {
+ compatible = "apple,blizzard-pmu";
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmu-p {
+ compatible = "apple,avalanche-pmu";
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&aic>;
+ interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+ interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ clkref: clock-ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "clkref";
+ };
+
+ clk_200m: clock-200m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "clk_200m";
+ };
+
+ /*
+ * This is a fabulated representation of the input clock
+ * to NCO since we don't know the true clock tree.
+ */
+ nco_clkref: clock-ref-nco {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "nco_ref";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpu_globals: globals {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_a: hw-cal-a {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_b: hw-cal-b {
+ status = "disabled";
+ };
+
+ uat_handoff: uat-handoff {
+ status = "disabled";
+ };
+
+ uat_pagetables: uat-pagetables {
+ status = "disabled";
+ };
+
+ uat_ttbs: uat-ttbs {
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-die0.dtsi b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
new file mode 100644
index 0000000..2e7d2bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6022 "M2 Ultra" SoC and present on
+ * Apple T6020 / T6021 "M2 Pro" / "M2 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+ nco: clock-controller@28e03c000 {
+ compatible = "apple,t6020-nco", "apple,t8103-nco";
+ reg = <0x2 0x8e03c000 0x0 0x14000>;
+ clocks = <&nco_clkref>;
+ #clock-cells = <1>;
+ };
+
+ aic: interrupt-controller@28e100000 {
+ compatible = "apple,t6020-aic", "apple,aic2";
+ #interrupt-cells = <4>;
+ interrupt-controller;
+ reg = <0x2 0x8e100000 0x0 0xc000>,
+ <0x2 0x8e10c000 0x0 0x1000>;
+ reg-names = "core", "event";
+ power-domains = <&ps_aic>;
+ };
+
+ nub_spmi0: spmi@29e114000 {
+ compatible = "apple,t6020-spmi", "apple,t8103-spmi";
+ reg = <0x2 0x9e114000 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ pmic1: pmic@f {
+ compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+ reg = <0xb SPMI_USID>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pm_setting: pm-setting@1405 {
+ reg = <0x1405 0x1>;
+ };
+
+ rtc_offset: rtc-offset@1411 {
+ reg = <0x1411 0x6>;
+ };
+
+ boot_stage: boot-stage@6001 {
+ reg = <0x6001 0x1>;
+ };
+
+ boot_error_count: boot-error-count@6002,0 {
+ reg = <0x6002 0x1>;
+ bits = <0 4>;
+ };
+
+ panic_count: panic-count@6002,4 {
+ reg = <0x6002 0x1>;
+ bits = <4 4>;
+ };
+
+ boot_error_stage: boot-error-stage@6003 {
+ reg = <0x6003 0x1>;
+ };
+
+ shutdown_flag: shutdown-flag@600f,3 {
+ reg = <0x600f 0x1>;
+ bits = <3 1>;
+ };
+
+ fault_shadow: fault-shadow@867b {
+ reg = <0x867b 0x10>;
+ };
+
+ socd: socd@8b00 {
+ reg = <0x8b00 0x400>;
+ };
+ };
+ };
+ };
+
+ wdt: watchdog@29e2c4000 {
+ compatible = "apple,t6020-wdt", "apple,t8103-wdt";
+ reg = <0x2 0x9e2c4000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 719 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ smc_mbox: mbox@2a2408000 {
+ compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x2 0xa2408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 862 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 863 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 864 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 865 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
+ smc: smc@2a2400000 {
+ compatible = "apple,t6020-smc", "apple,t8103-smc";
+ reg = <0x2 0xa2400000 0x0 0x4000>,
+ <0x2 0xa3e00000 0x0 0x100000>;
+ reg-names = "smc", "sram";
+ mboxes = <&smc_mbox>;
+
+ smc_gpio: gpio {
+ compatible = "apple,smc-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ smc_reboot: reboot {
+ compatible = "apple,smc-reboot";
+ nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+ <&boot_error_count>, <&panic_count>;
+ nvmem-cell-names = "shutdown_flag", "boot_stage",
+ "boot_error_count", "panic_count";
+ };
+ };
+
+ pinctrl_smc: pinctrl@2a2820000 {
+ compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+ reg = <0x2 0xa2820000 0x0 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_smc 0 0 30>;
+ apple,npins = <30>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 851 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 852 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 853 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 854 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 855 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 856 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 857 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sio_dart: iommu@39b008000 {
+ compatible = "apple,t6020-dart", "apple,t8110-dart";
+ reg = <0x3 0x9b008000 0x0 0x8000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1231 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ power-domains = <&ps_sio_cpu>;
+ };
+
+ fpwm0: pwm@39b030000 {
+ compatible = "apple,t6020-fpwm", "apple,s5l-fpwm";
+ reg = <0x3 0x9b030000 0x0 0x4000>;
+ power-domains = <&ps_fpwm0>;
+ clocks = <&clkref>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@39b040000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b040000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1219 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ i2c1: i2c@39b044000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b044000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1220 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@39b048000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b048000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1221 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@39b04c000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b04c000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1222 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@39b050000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b050000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1223 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c4>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@39b054000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b054000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1224 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c5_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c5>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@39b054000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b054000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1225 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c6_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c6>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@39b054000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b054000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1226 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c7_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c7>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@39b054000 {
+ compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+ reg = <0x3 0x9b054000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1227 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c8_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c8>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "disabled";
+ };
+
+ spi1: spi@39b104000 {
+ compatible = "apple,t6020-spi", "apple,t8103-spi";
+ reg = <0x3 0x9b104000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1206 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk_200m>;
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_spi1>;
+ status = "disabled";
+ };
+
+ spi2: spi@39b108000 {
+ compatible = "apple,t6020-spi", "apple,t8103-spi";
+ reg = <0x3 0x9b108000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1207 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkref>;
+ pinctrl-0 = <&spi2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_spi2>;
+ status = "disabled";
+ };
+
+ spi4: spi@39b110000 {
+ compatible = "apple,t6020-spi", "apple,t8103-spi";
+ reg = <0x3 0x9b110000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1209 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkref>;
+ pinctrl-0 = <&spi4_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_spi4>;
+ status = "disabled";
+ };
+
+ serial0: serial@39b200000 {
+ compatible = "apple,s5l-uart";
+ reg = <0x3 0x9b200000 0x0 0x4000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1198 IRQ_TYPE_LEVEL_HIGH>;
+ /*
+ * TODO: figure out the clocking properly, there may
+ * be a third selectable clock.
+ */
+ clocks = <&clkref>, <&clkref>;
+ clock-names = "uart", "clk_uart_baud0";
+ power-domains = <&ps_uart0>;
+ status = "disabled";
+ };
+
+ admac: dma-controller@39b400000 {
+ compatible = "apple,t6020-admac", "apple,t8103-admac";
+ reg = <0x3 0x9b400000 0x0 0x34000>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ interrupts-extended = <0>,
+ <&aic AIC_IRQ 0 1218 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>;
+ iommus = <&sio_dart 2>;
+ power-domains = <&ps_sio_adma>;
+ resets = <&ps_audio_p>;
+ };
+
+ mca: mca@39b600000 {
+ compatible = "apple,t6020-mca", "apple,t8103-mca";
+ reg = <0x3 0x9b600000 0x0 0x10000>,
+ <0x3 0x9b500000 0x0 0x20000>;
+ clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+ dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+ <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+ <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+ <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+ dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+ "tx1a", "rx1a", "tx1b", "rx1b",
+ "tx2a", "rx2a", "tx2b", "rx2b",
+ "tx3a", "rx3a", "tx3b", "rx3b";
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1211 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1212 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1213 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1214 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+ <&ps_mca2>, <&ps_mca3>;
+ resets = <&ps_audio_p>;
+ #sound-dai-cells = <1>;
+ };
+
+ gpu: gpu@406400000 {
+ compatible = "apple,agx-g14s";
+ reg = <0x4 0x6400000 0 0x40000>,
+ <0x4 0x4000000 0 0x1000000>;
+ reg-names = "asc", "sgx";
+ mboxes = <&agx_mbox>;
+ power-domains = <&ps_gfx>;
+ memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+ <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+ memory-region-names = "ttbs", "pagetables", "handoff",
+ "hw-cal-a", "hw-cal-b", "globals";
+
+ apple,firmware-abi = <0 0 0>;
+ };
+
+ agx_mbox: mbox@406408000 {
+ compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x4 0x6408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1143 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1144 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1145 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
+ pcie0: pcie@580000000 {
+ compatible = "apple,t6020-pcie";
+ device_type = "pci";
+
+ reg = <0x5 0x80000000 0x0 0x1000000>, /* config */
+ <0x5 0x91000000 0x0 0x4000>, /* rc */
+ <0x5 0x94008000 0x0 0x4000>, /* port0 */
+ <0x5 0x95008000 0x0 0x4000>, /* port1 */
+ <0x5 0x96008000 0x0 0x4000>, /* port2 */
+ <0x5 0x97008000 0x0 0x4000>, /* port3 */
+ <0x5 0x9e00c000 0x0 0x4000>, /* phy0 */
+ <0x5 0x9e010000 0x0 0x4000>, /* phy1 */
+ <0x5 0x9e014000 0x0 0x4000>, /* phy2 */
+ <0x5 0x9e018000 0x0 0x4000>; /* phy3 */
+ reg-names = "config", "rc",
+ "port0", "port1", "port2", "port3",
+ "phy0", "phy1", "phy2", "phy3";
+
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1340 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1344 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1348 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1352 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-controller;
+ msi-parent = <&pcie0>;
+ msi-ranges = <&aic AIC_IRQ 0 1672 IRQ_TYPE_EDGE_RISING 32>;
+
+ iommu-map = <0x100 &pcie0_dart_0 1 1>,
+ <0x200 &pcie0_dart_1 1 1>,
+ <0x300 &pcie0_dart_2 1 1>,
+ <0x400 &pcie0_dart_3 1 1>;
+ iommu-map-mask = <0xff00>;
+
+ bus-range = <0 4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+ <0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+ power-domains = <&ps_apcie_gp_sys>;
+ pinctrl-0 = <&pcie_pins>;
+ pinctrl-names = "default";
+
+ port00: pci@0,0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+ <0 0 0 2 &port00 0 0 0 1>,
+ <0 0 0 3 &port00 0 0 0 2>,
+ <0 0 0 4 &port00 0 0 0 3>;
+ };
+
+ port01: pci@1,0 {
+ device_type = "pci";
+ reg = <0x800 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+ <0 0 0 2 &port01 0 0 0 1>,
+ <0 0 0 3 &port01 0 0 0 2>,
+ <0 0 0 4 &port01 0 0 0 3>;
+ status = "disabled";
+ };
+
+ port02: pci@2,0 {
+ device_type = "pci";
+ reg = <0x1000 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+ <0 0 0 2 &port02 0 0 0 1>,
+ <0 0 0 3 &port02 0 0 0 2>,
+ <0 0 0 4 &port02 0 0 0 3>;
+ status = "disabled";
+ };
+
+ port03: pci@3,0 {
+ device_type = "pci";
+ reg = <0x1800 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+ <0 0 0 2 &port03 0 0 0 1>,
+ <0 0 0 3 &port03 0 0 0 2>,
+ <0 0 0 4 &port03 0 0 0 3>;
+ status = "disabled";
+ };
+ };
+
+ pcie0_dart_0: iommu@594000000 {
+ compatible = "apple,t6020-dart", "apple,t8110-dart";
+ reg = <0x5 0x94000000 0x0 0x4000>;
+ #iommu-cells = <1>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1341 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&ps_apcie_gp_sys>;
+ };
+
+ pcie0_dart_1: iommu@595000000 {
+ compatible = "apple,t6020-dart", "apple,t8110-dart";
+ reg = <0x5 0x95000000 0x0 0x4000>;
+ #iommu-cells = <1>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1345 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&ps_apcie_gp_sys>;
+ status = "disabled";
+ };
+
+ pcie0_dart_2: iommu@596000000 {
+ compatible = "apple,t6020-dart", "apple,t8110-dart";
+ reg = <0x5 0x96000000 0x0 0x4000>;
+ #iommu-cells = <1>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1349 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&ps_apcie_gp_sys>;
+ status = "disabled";
+ };
+
+ pcie0_dart_3: iommu@597000000 {
+ compatible = "apple,t6020-dart", "apple,t8110-dart";
+ reg = <0x5 0x97000000 0x0 0x4000>;
+ #iommu-cells = <1>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1353 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&ps_apcie_gp_sys>;
+ status = "disabled";
+ };
diff --git a/arch/arm64/boot/dts/apple/t602x-dieX.dtsi b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
new file mode 100644
index 0000000..cb07fd8
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes present on both dies of T6022 (M2 Ultra) and present on M2 Pro/Max.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+ DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+ compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+ reg = <0x2 0x10e20000 0 0x1000>;
+ #performance-domain-cells = <0>;
+ };
+
+ DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+ compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+ reg = <0x2 0x11e20000 0 0x1000>;
+ #performance-domain-cells = <0>;
+ };
+
+ DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+ compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+ reg = <0x2 0x12e20000 0 0x1000>;
+ #performance-domain-cells = <0>;
+ };
+
+ DIE_NODE(pmgr): power-management@28e080000 {
+ compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2 0x8e080000 0 0x8000>;
+ };
+
+ DIE_NODE(pmgr_south): power-management@28e680000 {
+ compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2 0x8e680000 0 0x8000>;
+ };
+
+ DIE_NODE(pmgr_east): power-management@290280000 {
+ compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2 0x90280000 0 0xc000>;
+ };
+
+ DIE_NODE(pinctrl_nub): pinctrl@29e1f0000 {
+ compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+ reg = <0x2 0x9e1f0000 0x0 0x4000>;
+ power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 30>;
+ apple,npins = <30>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ DIE_NO 711 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 712 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 713 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 714 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 715 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 716 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 717 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ DIE_NODE(pmgr_mini): power-management@29e280000 {
+ compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2 0x9e280000 0 0x4000>;
+ };
+
+ DIE_NODE(pinctrl_aop): pinctrl@2a6820000 {
+ compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+ reg = <0x2 0xa6820000 0x0 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 72>;
+ apple,npins = <72>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ DIE_NO 598 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 599 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 600 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 601 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 602 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 603 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 604 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+ compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+ reg = <0x3 0x9b028000 0x0 0x4000>;
+
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ DIE_NO 458 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 459 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 460 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 461 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 462 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 463 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 464 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clkref>;
+ power-domains = <&DIE_NODE(ps_gpio)>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+ apple,npins = <255>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ DIE_NODE(pmgr_gfx): power-management@404e80000 {
+ compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reg = <0x4 0x4e80000 0 0x4000>;
+ };
diff --git a/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
new file mode 100644
index 0000000..e41b647
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(63, 1)>,
+ <APPLE_PINMUX(64, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(65, 1)>,
+ <APPLE_PINMUX(66, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(67, 1)>,
+ <APPLE_PINMUX(68, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(69, 1)>,
+ <APPLE_PINMUX(70, 1)>;
+ };
+
+ i2c4_pins: i2c4-pins {
+ pinmux = <APPLE_PINMUX(71, 1)>,
+ <APPLE_PINMUX(72, 1)>;
+ };
+
+ i2c5_pins: i2c5-pins {
+ pinmux = <APPLE_PINMUX(73, 1)>,
+ <APPLE_PINMUX(74, 1)>;
+ };
+
+ i2c6_pins: i2c6-pins {
+ pinmux = <APPLE_PINMUX(75, 1)>,
+ <APPLE_PINMUX(76, 1)>;
+ };
+
+ i2c7_pins: i2c7-pins {
+ pinmux = <APPLE_PINMUX(77, 1)>,
+ <APPLE_PINMUX(78, 1)>;
+ };
+
+ i2c8_pins: i2c8-pins {
+ pinmux = <APPLE_PINMUX(79, 1)>,
+ <APPLE_PINMUX(80, 1)>;
+ };
+
+ spi1_pins: spi1-pins {
+ pinmux = <APPLE_PINMUX(155, 1)>, /* SDI */
+ <APPLE_PINMUX(156, 1)>, /* SDO */
+ <APPLE_PINMUX(157, 1)>, /* SCK */
+ <APPLE_PINMUX(158, 1)>; /* CS */
+ };
+
+ spi2_pins: spi2-pins {
+ pinmux = <APPLE_PINMUX(159, 1)>, /* SDI */
+ <APPLE_PINMUX(160, 1)>, /* SDO */
+ <APPLE_PINMUX(161, 1)>, /* SCK */
+ <APPLE_PINMUX(162, 1)>; /* CS */
+ };
+
+ spi4_pins: spi4-pins {
+ pinmux = <APPLE_PINMUX(167, 1)>, /* SDI */
+ <APPLE_PINMUX(168, 1)>, /* SDO */
+ <APPLE_PINMUX(169, 1)>, /* SCK */
+ <APPLE_PINMUX(170, 1)>; /* CS */
+ };
+
+ pcie_pins: pcie-pins {
+ pinmux = <APPLE_PINMUX(0, 1)>,
+ <APPLE_PINMUX(1, 1)>,
+ <APPLE_PINMUX(2, 1)>,
+ <APPLE_PINMUX(3, 1)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
new file mode 100644
index 0000000..0e806d8
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2022)
+ *
+ * This file contains the parts common to J414 and J416 devices with both t6020 and t6021.
+ *
+ * target-type: J414s / J414c / J416s / J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are essentially identical to the previous generation, other than
+ * the GPIO indices.
+ */
+
+#include "t600x-j314-j316.dtsi"
+
+&framebuffer0 {
+ power-domains = <&ps_disp0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm5 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&wifi0 {
+ compatible = "pci14e4,4434";
+};
+
+&bluetooth0 {
+ compatible = "pci14e4,5f72";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
new file mode 100644
index 0000000..ee12fea
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023) and Mac Studio (2023)
+ *
+ * This file contains the parts common to J474 and J475 devices with t6020,
+ * t6021 and t6022.
+ *
+ * target-type: J474s / J475c / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are very similar to the previous generation Mac Studio, other
+ * than GPIO indices.
+ */
+
+#include "t600x-j375.dtsi"
+
+&framebuffer0 {
+ power-domains = <&ps_dispext0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm3 {
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-nvme.dtsi b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
new file mode 100644
index 0000000..590cec8
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+ DIE_NODE(ans_mbox): mbox@347408000 {
+ compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x3 0x47408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ DIE_NO 1169 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 1170 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 1171 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ DIE_NO 1172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ power-domains = <&DIE_NODE(ps_ans2)>;
+ #mbox-cells = <0>;
+ };
+
+ DIE_NODE(sart): sart@34bc50000 {
+ compatible = "apple,t6020-sart", "apple,t6000-sart";
+ reg = <0x3 0x4bc50000 0x0 0x10000>;
+ power-domains = <&DIE_NODE(ps_ans2)>;
+ };
+
+ DIE_NODE(nvme): nvme@34bcc0000 {
+ compatible = "apple,t6020-nvme-ans2", "apple,t8103-nvme-ans2";
+ reg = <0x3 0x4bcc0000 0x0 0x40000>, <0x3 0x47400000 0x0 0x4000>;
+ reg-names = "nvme", "ans";
+ interrupt-parent = <&aic>;
+ /* The NVME interrupt is always routed to die 0 */
+ interrupts = <AIC_IRQ 0 1832 IRQ_TYPE_LEVEL_HIGH>;
+ mboxes = <&DIE_NODE(ans_mbox)>;
+ apple,sart = <&DIE_NODE(sart)>;
+ power-domains = <&DIE_NODE(ps_ans2)>,
+ <&DIE_NODE(ps_apcie_st_sys)>,
+ <&DIE_NODE(ps_apcie_st1_sys)>;
+ power-domain-names = "ans", "apcie0", "apcie1";
+ resets = <&DIE_NODE(ps_ans2)>;
+ };
diff --git a/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
new file mode 100644
index 0000000..f5382a2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
@@ -0,0 +1,2265 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for Apple T602x "M2 Pro/Max/Ultra" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+ DIE_NODE(ps_afi): power-controller@100 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x100 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afi);
+ apple,always-on; /* Apple Fabric, CPU interface is here */
+ };
+
+ DIE_NODE(ps_aic): power-controller@108 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x108 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(aic);
+ apple,always-on; /* Core device */
+ };
+
+ DIE_NODE(ps_dwi): power-controller@110 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x110 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dwi);
+ };
+
+ DIE_NODE(ps_pms): power-controller@118 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x118 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(pms);
+ apple,always-on; /* Core device */
+ };
+
+ DIE_NODE(ps_gpio): power-controller@120 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x120 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(gpio);
+ power-domains = <&DIE_NODE(ps_sio)>, <&DIE_NODE(ps_pms)>;
+ };
+
+ DIE_NODE(ps_soc_dpe): power-controller@128 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x128 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(soc_dpe);
+ apple,always-on; /* Core device */
+ };
+
+ DIE_NODE(ps_pms_c1ppt): power-controller@130 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x130 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(pms_c1ppt);
+ apple,always-on; /* Core device */
+ };
+
+ DIE_NODE(ps_pmgr_soc_ocla): power-controller@138 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x138 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(pmgr_soc_ocla);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_amcc0): power-controller@168 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x168 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc0);
+ apple,always-on; /* Memory controller */
+ };
+
+ DIE_NODE(ps_amcc2): power-controller@170 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x170 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc2);
+ apple,always-on; /* Memory controller */
+ };
+
+ DIE_NODE(ps_dcs_00): power-controller@178 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x178 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_00);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_01): power-controller@180 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x180 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_01);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_02): power-controller@188 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x188 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_02);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_03): power-controller@190 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x190 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_03);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_08): power-controller@198 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x198 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_08);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_09): power-controller@1a0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1a0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_09);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_10): power-controller@1a8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1a8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_10);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_11): power-controller@1b0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1b0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_11);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_afnc1_ioa): power-controller@1b8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1b8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc1_ioa);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afi)>;
+ };
+
+ DIE_NODE(ps_afc): power-controller@1d0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1d0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afc);
+ apple,always-on; /* Apple Fabric, CPU interface is here */
+ };
+
+ DIE_NODE(ps_afnc0_ioa): power-controller@1e8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1e8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc0_ioa);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afi)>;
+ };
+
+ DIE_NODE(ps_afnc1_ls): power-controller@1f0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1f0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc1_ls);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+ };
+
+ DIE_NODE(ps_afnc0_ls): power-controller@1f8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1f8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc0_ls);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+ };
+
+ DIE_NODE(ps_afnc1_lw0): power-controller@200 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x200 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc1_lw0);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+ };
+
+ DIE_NODE(ps_afnc1_lw1): power-controller@208 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x208 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc1_lw1);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+ };
+
+ DIE_NODE(ps_afnc1_lw2): power-controller@210 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x210 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc1_lw2);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+ };
+
+ DIE_NODE(ps_afnc0_lw0): power-controller@218 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x218 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc0_lw0);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+ };
+
+ DIE_NODE(ps_scodec): power-controller@220 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x220 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(scodec);
+ power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+ };
+
+ DIE_NODE(ps_atc0_common): power-controller@228 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x228 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc0_common);
+ power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+ };
+
+ DIE_NODE(ps_atc1_common): power-controller@230 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x230 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc1_common);
+ power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+ };
+
+ DIE_NODE(ps_atc2_common): power-controller@238 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x238 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc2_common);
+ power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+ };
+
+ DIE_NODE(ps_atc3_common): power-controller@240 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x240 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc3_common);
+ power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+ };
+
+ DIE_NODE(ps_dispext1_sys): power-controller@248 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x248 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext1_sys);
+ power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+ };
+
+ DIE_NODE(ps_pms_bridge): power-controller@250 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x250 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(pms_bridge);
+ apple,always-on; /* Core device */
+ power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+ };
+
+ DIE_NODE(ps_dispext0_sys): power-controller@258 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x258 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext0_sys);
+ power-domains = <&DIE_NODE(ps_afnc0_lw0)>, <&DIE_NODE(ps_afr)>;
+ };
+
+ DIE_NODE(ps_ane_sys): power-controller@260 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x260 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_sys);
+ power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+ };
+
+ DIE_NODE(ps_avd_sys): power-controller@268 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x268 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(avd_sys);
+ power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+ };
+
+ DIE_NODE(ps_atc0_cio): power-controller@270 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x270 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc0_cio);
+ power-domains = <&DIE_NODE(ps_atc0_common)>;
+ };
+
+ DIE_NODE(ps_atc0_pcie): power-controller@278 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x278 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc0_pcie);
+ power-domains = <&DIE_NODE(ps_atc0_common)>;
+ };
+
+ DIE_NODE(ps_atc1_cio): power-controller@280 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x280 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc1_cio);
+ power-domains = <&DIE_NODE(ps_atc1_common)>;
+ };
+
+ DIE_NODE(ps_atc1_pcie): power-controller@288 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x288 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc1_pcie);
+ power-domains = <&DIE_NODE(ps_atc1_common)>;
+ };
+
+ DIE_NODE(ps_atc2_cio): power-controller@290 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x290 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc2_cio);
+ power-domains = <&DIE_NODE(ps_atc2_common)>;
+ };
+
+ DIE_NODE(ps_atc2_pcie): power-controller@298 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x298 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc2_pcie);
+ power-domains = <&DIE_NODE(ps_atc2_common)>;
+ };
+
+ DIE_NODE(ps_atc3_cio): power-controller@2a0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2a0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc3_cio);
+ power-domains = <&DIE_NODE(ps_atc3_common)>;
+ };
+
+ DIE_NODE(ps_atc3_pcie): power-controller@2a8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2a8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc3_pcie);
+ power-domains = <&DIE_NODE(ps_atc3_common)>;
+ };
+
+ DIE_NODE(ps_dispext1_fe): power-controller@2b0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2b0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext1_fe);
+ power-domains = <&DIE_NODE(ps_dispext1_sys)>;
+ };
+
+ DIE_NODE(ps_dispext1_cpu0): power-controller@2b8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2b8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext1_cpu0);
+ power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+ apple,min-state = <4>;
+ };
+
+ DIE_NODE(ps_dispext0_fe): power-controller@2c0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2c0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext0_fe);
+ power-domains = <&DIE_NODE(ps_dispext0_sys)>;
+ };
+
+ DIE_NODE(ps_pmp): power-controller@2c8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2c8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(pmp);
+ };
+
+ DIE_NODE(ps_pms_sram): power-controller@2d0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2d0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(pms_sram);
+ };
+
+ DIE_NODE(ps_dispext0_cpu0): power-controller@2d8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2d8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext0_cpu0);
+ power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+ apple,min-state = <4>;
+ };
+
+ DIE_NODE(ps_ane_cpu): power-controller@2e0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2e0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_cpu);
+ power-domains = <&DIE_NODE(ps_ane_sys)>;
+ };
+
+ DIE_NODE(ps_atc0_cio_pcie): power-controller@2e8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2e8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc0_cio_pcie);
+ power-domains = <&DIE_NODE(ps_atc0_cio)>;
+ };
+
+ DIE_NODE(ps_atc0_cio_usb): power-controller@2f0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2f0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc0_cio_usb);
+ power-domains = <&DIE_NODE(ps_atc0_cio)>;
+ };
+
+ DIE_NODE(ps_atc1_cio_pcie): power-controller@2f8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2f8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc1_cio_pcie);
+ power-domains = <&DIE_NODE(ps_atc1_cio)>;
+ };
+
+ DIE_NODE(ps_atc1_cio_usb): power-controller@300 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x300 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc1_cio_usb);
+ power-domains = <&DIE_NODE(ps_atc1_cio)>;
+ };
+
+ DIE_NODE(ps_atc2_cio_pcie): power-controller@308 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x308 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc2_cio_pcie);
+ power-domains = <&DIE_NODE(ps_atc2_cio)>;
+ };
+
+ DIE_NODE(ps_atc2_cio_usb): power-controller@310 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x310 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc2_cio_usb);
+ power-domains = <&DIE_NODE(ps_atc2_cio)>;
+ };
+
+ DIE_NODE(ps_atc3_cio_pcie): power-controller@318 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x318 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc3_cio_pcie);
+ power-domains = <&DIE_NODE(ps_atc3_cio)>;
+ };
+
+ DIE_NODE(ps_atc3_cio_usb): power-controller@320 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x320 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc3_cio_usb);
+ power-domains = <&DIE_NODE(ps_atc3_cio)>;
+ };
+
+ DIE_NODE(ps_trace_fab): power-controller@390 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x390 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(trace_fab);
+ };
+
+ DIE_NODE(ps_ane_sys_mpm): power-controller@4000 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4000 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_sys_mpm);
+ power-domains = <&DIE_NODE(ps_ane_sys)>;
+ };
+
+ DIE_NODE(ps_ane_td): power-controller@4008 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4008 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_td);
+ power-domains = <&DIE_NODE(ps_ane_sys)>;
+ };
+
+ DIE_NODE(ps_ane_base): power-controller@4010 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4010 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_base);
+ power-domains = <&DIE_NODE(ps_ane_td)>;
+ };
+
+ DIE_NODE(ps_ane_set1): power-controller@4018 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4018 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_set1);
+ power-domains = <&DIE_NODE(ps_ane_base)>;
+ };
+
+ DIE_NODE(ps_ane_set2): power-controller@4020 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4020 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_set2);
+ power-domains = <&DIE_NODE(ps_ane_set1)>;
+ };
+
+ DIE_NODE(ps_ane_set3): power-controller@4028 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4028 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_set3);
+ power-domains = <&DIE_NODE(ps_ane_set2)>;
+ };
+
+ DIE_NODE(ps_ane_set4): power-controller@4030 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4030 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ane_set4);
+ power-domains = <&DIE_NODE(ps_ane_set3)>;
+ };
+};
+
+&DIE_NODE(pmgr_south) {
+ DIE_NODE(ps_amcc4): power-controller@100 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x100 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc4);
+ apple,always-on;
+ };
+
+ DIE_NODE(ps_amcc5): power-controller@108 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x108 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc5);
+ apple,always-on;
+ };
+
+ DIE_NODE(ps_amcc6): power-controller@110 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x110 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc6);
+ apple,always-on;
+ };
+
+ DIE_NODE(ps_amcc7): power-controller@118 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x118 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc7);
+ apple,always-on;
+ };
+
+ DIE_NODE(ps_dcs_16): power-controller@120 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x120 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_16);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_17): power-controller@128 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x128 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_17);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_18): power-controller@130 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x130 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_18);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_19): power-controller@138 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x138 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_19);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_20): power-controller@140 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x140 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_20);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_21): power-controller@148 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x148 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_21);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_22): power-controller@150 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x150 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_22);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_23): power-controller@158 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x158 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_23);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_24): power-controller@160 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x160 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_24);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_25): power-controller@168 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x168 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_25);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_26): power-controller@170 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x170 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_26);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_27): power-controller@178 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x178 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_27);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_28): power-controller@180 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x180 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_28);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_29): power-controller@188 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x188 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_29);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_30): power-controller@190 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x190 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_30);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_31): power-controller@198 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x198 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_31);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1a0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc4_ioa);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afi)>;
+ };
+
+ DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1a8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc4_ls);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+ };
+
+ DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1b0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc4_lw0);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+ };
+
+ DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1b8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc5_ioa);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afi)>;
+ };
+
+ DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1c0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc5_ls);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+ };
+
+ DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1c8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc5_lw0);
+ apple,always-on; /* Apple Fabric */
+ power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+ };
+
+ DIE_NODE(ps_dispext2_sys): power-controller@1d0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1d0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext2_sys);
+ };
+
+ DIE_NODE(ps_msr1): power-controller@1d8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1d8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(msr1);
+ };
+
+ DIE_NODE(ps_dispext2_fe): power-controller@1e0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1e0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext2_fe);
+ power-domains = <&DIE_NODE(ps_dispext2_sys)>;
+ };
+
+ DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1e8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext2_cpu0);
+ power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+ apple,min-state = <4>;
+ };
+
+ DIE_NODE(ps_msr1_ase_core): power-controller@1f0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1f0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(msr1_ase_core);
+ power-domains = <&DIE_NODE(ps_msr1)>;
+ };
+
+ DIE_NODE(ps_dispext3_sys): power-controller@220 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x220 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext3_sys);
+ };
+
+ DIE_NODE(ps_venc1_sys): power-controller@228 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x228 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc1_sys);
+ };
+
+ DIE_NODE(ps_dispext3_fe): power-controller@230 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x230 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext3_fe);
+ power-domains = <&DIE_NODE(ps_dispext3_sys)>;
+ };
+
+ DIE_NODE(ps_dispext3_cpu0): power-controller@238 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x238 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dispext3_cpu0);
+ power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+ apple,min-state = <4>;
+ };
+
+ DIE_NODE(ps_venc1_dma): power-controller@4000 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4000 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc1_dma);
+ power-domains = <&DIE_NODE(ps_venc1_sys)>;
+ };
+
+ DIE_NODE(ps_venc1_pipe4): power-controller@4008 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4008 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc1_pipe4);
+ power-domains = <&DIE_NODE(ps_venc1_dma)>;
+ };
+
+ DIE_NODE(ps_venc1_pipe5): power-controller@4010 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4010 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc1_pipe5);
+ power-domains = <&DIE_NODE(ps_venc1_dma)>;
+ };
+
+ DIE_NODE(ps_venc1_me0): power-controller@4018 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4018 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc1_me0);
+ power-domains = <&DIE_NODE(ps_venc1_pipe5)>, <&DIE_NODE(ps_venc1_pipe4)>;
+ };
+
+ DIE_NODE(ps_venc1_me1): power-controller@4020 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4020 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc1_me1);
+ power-domains = <&DIE_NODE(ps_venc1_me0)>;
+ };
+};
+
+&DIE_NODE(pmgr_east) {
+ DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x100 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(clvr_spmi0);
+ apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+ };
+
+ DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x108 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(clvr_spmi1);
+ apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+ };
+
+ DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x110 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(clvr_spmi2);
+ apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+ };
+
+ DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x118 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(clvr_spmi3);
+ apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+ };
+
+ DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x120 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(clvr_spmi4);
+ apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+ };
+
+ DIE_NODE(ps_ispsens0): power-controller@128 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x128 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ispsens0);
+ };
+
+ DIE_NODE(ps_ispsens1): power-controller@130 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x130 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ispsens1);
+ };
+
+ DIE_NODE(ps_ispsens2): power-controller@138 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x138 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ispsens2);
+ };
+
+ DIE_NODE(ps_ispsens3): power-controller@140 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x140 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ispsens3);
+ };
+
+ DIE_NODE(ps_afnc6_ioa): power-controller@148 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x148 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc6_ioa);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afi)>;
+ };
+
+ DIE_NODE(ps_afnc6_ls): power-controller@150 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x150 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc6_ls);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afnc6_ioa)>;
+ };
+
+ DIE_NODE(ps_afnc6_lw0): power-controller@158 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x158 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc6_lw0);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afnc6_ls)>;
+ };
+
+ DIE_NODE(ps_afnc2_ioa): power-controller@160 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x160 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc2_ioa);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_dcs_10)>;
+ };
+
+ DIE_NODE(ps_afnc2_ls): power-controller@168 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x168 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc2_ls);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+ };
+
+ DIE_NODE(ps_afnc2_lw0): power-controller@170 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x170 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc2_lw0);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+ };
+
+ DIE_NODE(ps_afnc2_lw1): power-controller@178 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x178 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc2_lw1);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+ };
+
+ DIE_NODE(ps_afnc3_ioa): power-controller@180 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x180 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc3_ioa);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afi)>;
+ };
+
+ DIE_NODE(ps_afnc3_ls): power-controller@188 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x188 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc3_ls);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+ };
+
+ DIE_NODE(ps_afnc3_lw0): power-controller@190 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x190 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afnc3_lw0);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+ };
+
+ DIE_NODE(ps_apcie_gp): power-controller@198 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x198 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_gp);
+ power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+ };
+
+ DIE_NODE(ps_apcie_st): power-controller@1a0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1a0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_st);
+ power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+ };
+
+ DIE_NODE(ps_ans2): power-controller@1a8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1a8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(ans2);
+ power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+ };
+
+ DIE_NODE(ps_disp0_sys): power-controller@1b0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1b0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(disp0_sys);
+ power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+ };
+
+ DIE_NODE(ps_jpg): power-controller@1b8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1b8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(jpg);
+ power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+ };
+
+ DIE_NODE(ps_sio): power-controller@1c0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1c0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(sio);
+ power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+ };
+
+ DIE_NODE(ps_isp_sys): power-controller@1c8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1c8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(isp_sys);
+ power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+ status = "disabled";
+ };
+
+ DIE_NODE(ps_disp0_fe): power-controller@1d0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1d0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(disp0_fe);
+ power-domains = <&DIE_NODE(ps_disp0_sys)>;
+ };
+
+ DIE_NODE(ps_disp0_cpu0): power-controller@1d8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1d8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(disp0_cpu0);
+ power-domains = <&DIE_NODE(ps_disp0_fe)>;
+ apple,min-state = <4>;
+ };
+
+ DIE_NODE(ps_sio_cpu): power-controller@1e0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1e0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(sio_cpu);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_fpwm0): power-controller@1e8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1e8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(fpwm0);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_fpwm1): power-controller@1f0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1f0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(fpwm1);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_fpwm2): power-controller@1f8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x1f8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(fpwm2);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c0): power-controller@200 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x200 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c0);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c1): power-controller@208 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x208 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c1);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c2): power-controller@210 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x210 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c2);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c3): power-controller@218 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x218 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c3);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c4): power-controller@220 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x220 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c4);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c5): power-controller@228 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x228 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c5);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c6): power-controller@230 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x230 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c6);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c7): power-controller@238 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x238 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c7);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_i2c8): power-controller@240 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x240 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(i2c8);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_spi_p): power-controller@248 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x248 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(spi_p);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_sio_spmi0): power-controller@250 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x250 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(sio_spmi0);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_sio_spmi1): power-controller@258 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x258 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(sio_spmi1);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_sio_spmi2): power-controller@260 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x260 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(sio_spmi2);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_uart_p): power-controller@268 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x268 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart_p);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_audio_p): power-controller@270 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x270 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(audio_p);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_sio_adma): power-controller@278 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x278 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(sio_adma);
+ power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_aes): power-controller@280 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x280 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(aes);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_dptx_phy_ps): power-controller@288 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x288 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dptx_phy_ps);
+ power-domains = <&DIE_NODE(ps_sio)>;
+ };
+
+ DIE_NODE(ps_spi0): power-controller@2d8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2d8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(spi0);
+ power-domains = <&DIE_NODE(ps_spi_p)>;
+ };
+
+ DIE_NODE(ps_spi1): power-controller@2e0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2e0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(spi1);
+ power-domains = <&DIE_NODE(ps_spi_p)>;
+ };
+
+ DIE_NODE(ps_spi2): power-controller@2e8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2e8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(spi2);
+ power-domains = <&DIE_NODE(ps_spi_p)>;
+ };
+
+ DIE_NODE(ps_spi3): power-controller@2f0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2f0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(spi3);
+ power-domains = <&DIE_NODE(ps_spi_p)>;
+ };
+
+ DIE_NODE(ps_spi4): power-controller@2f8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x2f8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(spi4);
+ power-domains = <&DIE_NODE(ps_spi_p)>;
+ };
+
+ DIE_NODE(ps_spi5): power-controller@300 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x300 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(spi5);
+ power-domains = <&DIE_NODE(ps_spi_p)>;
+ };
+
+ DIE_NODE(ps_uart_n): power-controller@308 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x308 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart_n);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_uart0): power-controller@310 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x310 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart0);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_amcc1): power-controller@318 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x318 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc1);
+ apple,always-on;
+ };
+
+ DIE_NODE(ps_amcc3): power-controller@320 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x320 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(amcc3);
+ apple,always-on;
+ };
+
+ DIE_NODE(ps_dcs_04): power-controller@328 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x328 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_04);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_05): power-controller@330 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x330 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_05);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_06): power-controller@338 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x338 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_06);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_07): power-controller@340 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x340 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_07);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_12): power-controller@348 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x348 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_12);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_13): power-controller@350 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x350 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_13);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_14): power-controller@358 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x358 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_14);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_dcs_15): power-controller@360 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x360 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dcs_15);
+ apple,always-on; /* LPDDR5 interface */
+ };
+
+ DIE_NODE(ps_uart1): power-controller@368 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x368 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart1);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_uart2): power-controller@370 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x370 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart2);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_uart3): power-controller@378 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x378 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart3);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_uart4): power-controller@380 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x380 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart4);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_uart5): power-controller@388 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x388 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart5);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_uart6): power-controller@390 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x390 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(uart6);
+ power-domains = <&DIE_NODE(ps_uart_p)>;
+ };
+
+ DIE_NODE(ps_mca0): power-controller@398 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x398 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mca0);
+ power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+ };
+
+ DIE_NODE(ps_mca1): power-controller@3a0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3a0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mca1);
+ power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+ };
+
+ DIE_NODE(ps_mca2): power-controller@3a8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3a8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mca2);
+ power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+ };
+
+ DIE_NODE(ps_mca3): power-controller@3b0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3b0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mca3);
+ power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+ };
+
+ DIE_NODE(ps_dpa0): power-controller@3b8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3b8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dpa0);
+ power-domains = <&DIE_NODE(ps_audio_p)>;
+ };
+
+ DIE_NODE(ps_dpa1): power-controller@3c0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3c0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dpa1);
+ power-domains = <&DIE_NODE(ps_audio_p)>;
+ };
+
+ DIE_NODE(ps_dpa2): power-controller@3c8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3c8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dpa2);
+ power-domains = <&DIE_NODE(ps_audio_p)>;
+ };
+
+ DIE_NODE(ps_dpa3): power-controller@3d0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3d0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dpa3);
+ power-domains = <&DIE_NODE(ps_audio_p)>;
+ };
+
+ DIE_NODE(ps_msr0): power-controller@3d8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3d8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(msr0);
+ };
+
+ DIE_NODE(ps_venc_sys): power-controller@3e0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3e0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc_sys);
+ };
+
+ DIE_NODE(ps_dpa4): power-controller@3e8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3e8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dpa4);
+ power-domains = <&DIE_NODE(ps_audio_p)>;
+ };
+
+ DIE_NODE(ps_msr0_ase_core): power-controller@3f0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3f0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(msr0_ase_core);
+ power-domains = <&DIE_NODE(ps_msr0)>;
+ };
+
+ DIE_NODE(ps_apcie_gpshr_sys): power-controller@3f8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x3f8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_gpshr_sys);
+ power-domains = <&DIE_NODE(ps_apcie_gp)>;
+ };
+
+ DIE_NODE(ps_apcie_st_sys): power-controller@408 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x408 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_st_sys);
+ power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+ };
+
+ DIE_NODE(ps_apcie_st1_sys): power-controller@410 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x410 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_st1_sys);
+ power-domains = <&DIE_NODE(ps_apcie_st_sys)>;
+ };
+
+ DIE_NODE(ps_apcie_gp_sys): power-controller@418 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x418 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_gp_sys);
+ power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+ apple,always-on; /* Breaks things if shut down */
+ };
+
+ DIE_NODE(ps_apcie_ge_sys): power-controller@420 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x420 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_ge_sys);
+ power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+ };
+
+ DIE_NODE(ps_apcie_phy_sw): power-controller@428 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x428 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(apcie_phy_sw);
+ apple,always-on; /* macOS does not turn this off */
+ };
+
+ DIE_NODE(ps_sep): power-controller@c00 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xc00 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(sep);
+ apple,always-on; /* Locked on */
+ };
+
+ /* There is a dependency tree involved with these PDs,
+ * but we do not express it here since the ISP driver
+ * is supposed to sequence them in the right order anyway.
+ *
+ * This also works around spurious parent PD activation
+ * on machines with ISP disabled (desktops), so we don't
+ * have to enable/disable everything in the per-model DTs.
+ */
+ DIE_NODE(ps_isp_cpu): power-controller@4000 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4000 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(isp_cpu);
+ /* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+ };
+
+ DIE_NODE(ps_isp_fe): power-controller@4008 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4008 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(isp_fe);
+ /* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+ };
+
+ DIE_NODE(ps_dprx): power-controller@4010 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4010 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(dprx);
+ /* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+ };
+
+ DIE_NODE(ps_isp_vis): power-controller@4018 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4018 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(isp_vis);
+ /* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+ };
+
+ DIE_NODE(ps_isp_be): power-controller@4020 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4020 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(isp_be);
+ /* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+ };
+
+ DIE_NODE(ps_isp_raw): power-controller@4028 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4028 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(isp_raw);
+ /* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+ };
+
+ DIE_NODE(ps_isp_clr): power-controller@4030 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x4030 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(isp_clr);
+ /* power-domains = <&DIE_NODE(ps_isp_be)>; */
+ };
+
+ DIE_NODE(ps_venc_dma): power-controller@8000 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x8000 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc_dma);
+ power-domains = <&DIE_NODE(ps_venc_sys)>;
+ };
+
+ DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x8008 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc_pipe4);
+ power-domains = <&DIE_NODE(ps_venc_dma)>;
+ };
+
+ DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x8010 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc_pipe5);
+ power-domains = <&DIE_NODE(ps_venc_dma)>;
+ };
+
+ DIE_NODE(ps_venc_me0): power-controller@8018 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x8018 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc_me0);
+ power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+ };
+
+ DIE_NODE(ps_venc_me1): power-controller@8020 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x8020 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(venc_me1);
+ power-domains = <&DIE_NODE(ps_venc_me0)>;
+ };
+
+ DIE_NODE(ps_prores): power-controller@c000 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xc000 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(prores);
+ power-domains = <&DIE_NODE(ps_afnc3_lw0)>;
+ };
+};
+
+&DIE_NODE(pmgr_mini) {
+ DIE_NODE(ps_debug): power-controller@58 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x58 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(debug);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_nub_spmi0): power-controller@60 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x60 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(nub_spmi0);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_nub_spmi1): power-controller@68 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x68 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(nub_spmi1);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_nub_aon): power-controller@70 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x70 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(nub_aon);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_msg): power-controller@78 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x78 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(msg);
+ apple,always-on; /* Core AON device? */
+ };
+
+ DIE_NODE(ps_nub_gpio): power-controller@80 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x80 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(nub_gpio);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_nub_fabric): power-controller@88 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x88 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(nub_fabric);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_atc0_usb_aon): power-controller@90 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x90 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc0_usb_aon);
+ apple,always-on; /* Needs to stay on for dwc3 to work */
+ };
+
+ DIE_NODE(ps_atc1_usb_aon): power-controller@98 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x98 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc1_usb_aon);
+ apple,always-on; /* Needs to stay on for dwc3 to work */
+ };
+
+ DIE_NODE(ps_atc2_usb_aon): power-controller@a0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xa0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc2_usb_aon);
+ apple,always-on; /* Needs to stay on for dwc3 to work */
+ };
+
+ DIE_NODE(ps_atc3_usb_aon): power-controller@a8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xa8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc3_usb_aon);
+ apple,always-on; /* Needs to stay on for dwc3 to work */
+ };
+
+ DIE_NODE(ps_mtp_fabric): power-controller@b0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xb0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_fabric);
+ apple,always-on;
+ power-domains = <&DIE_NODE(ps_nub_fabric)>;
+ status = "disabled";
+ };
+
+ DIE_NODE(ps_nub_sram): power-controller@b8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xb8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(nub_sram);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_debug_switch): power-controller@c0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xc0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(debug_switch);
+ apple,always-on; /* Core AON device */
+ };
+
+ DIE_NODE(ps_atc0_usb): power-controller@c8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xc8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc0_usb);
+ power-domains = <&DIE_NODE(ps_atc0_common)>;
+ };
+
+ DIE_NODE(ps_atc1_usb): power-controller@d0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xd0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc1_usb);
+ power-domains = <&DIE_NODE(ps_atc1_common)>;
+ };
+
+ DIE_NODE(ps_atc2_usb): power-controller@d8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xd8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc2_usb);
+ power-domains = <&DIE_NODE(ps_atc2_common)>;
+ };
+
+ DIE_NODE(ps_atc3_usb): power-controller@e0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xe0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(atc3_usb);
+ power-domains = <&DIE_NODE(ps_atc3_common)>;
+ };
+
+#if 0
+ /* MTP stuff is self-managed */
+ DIE_NODE(ps_mtp_gpio): power-controller@e8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xe8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_gpio);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+ };
+
+ DIE_NODE(ps_mtp_base): power-controller@f0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xf0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_base);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+ };
+
+ DIE_NODE(ps_mtp_periph): power-controller@f8 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0xf8 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_periph);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+ };
+
+ DIE_NODE(ps_mtp_spi0): power-controller@100 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x100 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_spi0);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+ };
+
+ DIE_NODE(ps_mtp_i2cm0): power-controller@108 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x108 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_i2cm0);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+ };
+
+ DIE_NODE(ps_mtp_uart0): power-controller@110 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x110 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_uart0);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+ };
+
+ DIE_NODE(ps_mtp_cpu): power-controller@118 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x118 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_cpu);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+ };
+
+ DIE_NODE(ps_mtp_scm_fabric): power-controller@120 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x120 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_scm_fabric);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_periph)>;
+ };
+
+ DIE_NODE(ps_mtp_sram): power-controller@128 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x128 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_sram);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_scm_fabric)>, <&DIE_NODE(ps_mtp_cpu)>;
+ };
+
+ DIE_NODE(ps_mtp_dma): power-controller@130 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x130 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(mtp_dma);
+ apple,always-on; /* MTP always stays on */
+ power-domains = <&DIE_NODE(ps_mtp_sram)>;
+ };
+#endif
+};
+
+&DIE_NODE(pmgr_gfx) {
+ DIE_NODE(ps_gpx): power-controller@0 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x0 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(gpx);
+ apple,min-state = <4>;
+ apple,always-on;
+ };
+
+ DIE_NODE(ps_afr): power-controller@100 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x100 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(afr);
+ /* Apple Fabric, media stuff: this can power down */
+ apple,min-state = <4>;
+ };
+
+ DIE_NODE(ps_gfx): power-controller@108 {
+ compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+ reg = <0x108 4>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = DIE_LABEL(gfx);
+ power-domains = <&DIE_NODE(ps_afr)>, <&DIE_NODE(ps_gpx)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/apple/t7000.dtsi b/arch/arm64/boot/dts/apple/t7000.dtsi
index 52edc8d..0342455 100644
--- a/arch/arm64/boot/dts/apple/t7000.dtsi
+++ b/arch/arm64/boot/dts/apple/t7000.dtsi
@@ -144,6 +144,62 @@ serial6: serial@20a0d8000 {
status = "disabled";
};
+ i2c0: i2c@20a110000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a110000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20a111000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a111000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20a112000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a112000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@20a113000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a113000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmgr: power-management@20e000000 {
compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
#address-cells = <1>;
@@ -195,6 +251,26 @@ pinctrl: pinctrl@20e300000 {
<AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(97, 1)>,
+ <APPLE_PINMUX(96, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(139, 1)>,
+ <APPLE_PINMUX(138, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(65, 1)>,
+ <APPLE_PINMUX(64, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(87, 1)>,
+ <APPLE_PINMUX(86, 1)>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/apple/t7001.dtsi b/arch/arm64/boot/dts/apple/t7001.dtsi
index a2efa813..e1afb05 100644
--- a/arch/arm64/boot/dts/apple/t7001.dtsi
+++ b/arch/arm64/boot/dts/apple/t7001.dtsi
@@ -144,6 +144,62 @@ serial0: serial@20a0c0000 {
status = "disabled";
};
+ i2c0: i2c@20a110000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a110000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20a111000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a111000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20a112000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a112000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@20a113000 {
+ compatible = "apple,t7000-i2c", "apple,i2c";
+ reg = <0x2 0x0a113000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmgr: power-management@20e000000 {
compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
#address-cells = <1>;
@@ -188,6 +244,26 @@ pinctrl: pinctrl@20e300000 {
<AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(38, 1)>,
+ <APPLE_PINMUX(37, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(66, 1)>,
+ <APPLE_PINMUX(65, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(133, 1)>,
+ <APPLE_PINMUX(132, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(135, 1)>,
+ <APPLE_PINMUX(134, 1)>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/apple/t8010.dtsi b/arch/arm64/boot/dts/apple/t8010.dtsi
index b961d4f..522b389 100644
--- a/arch/arm64/boot/dts/apple/t8010.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010.dtsi
@@ -164,6 +164,62 @@ serial0: serial@20a0c0000 {
status = "disabled";
};
+ i2c0: i2c@20a110000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a110000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20a111000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a111000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20a112000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a112000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@20a113000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a113000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmgr: power-management@20e000000 {
compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
#address-cells = <1>;
@@ -207,6 +263,26 @@ pinctrl_ap: pinctrl@20f100000 {
<AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(197, 1)>,
+ <APPLE_PINMUX(196, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(40, 1)>,
+ <APPLE_PINMUX(39, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(132, 1)>,
+ <APPLE_PINMUX(133, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(41, 1)>,
+ <APPLE_PINMUX(42, 1)>;
+ };
};
pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/t8011.dtsi b/arch/arm64/boot/dts/apple/t8011.dtsi
index 974f78c..039aa4d1 100644
--- a/arch/arm64/boot/dts/apple/t8011.dtsi
+++ b/arch/arm64/boot/dts/apple/t8011.dtsi
@@ -168,6 +168,62 @@ serial0: serial@20a0c0000 {
status = "disabled";
};
+ i2c0: i2c@20a110000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a110000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 230 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20a111000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a111000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 231 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20a112000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a112000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@20a113000 {
+ compatible = "apple,t8010-i2c", "apple,i2c";
+ reg = <0x2 0x0a113000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmgr: power-management@20e000000 {
compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
#address-cells = <1>;
@@ -204,6 +260,26 @@ pinctrl_ap: pinctrl@20f100000 {
<AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(211, 1)>,
+ <APPLE_PINMUX(210, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(156, 1)>,
+ <APPLE_PINMUX(155, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(58, 1)>,
+ <APPLE_PINMUX(57, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(158, 1)>,
+ <APPLE_PINMUX(157, 1)>;
+ };
};
pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/t8012.dtsi b/arch/arm64/boot/dts/apple/t8012.dtsi
index a259e57..e792381 100644
--- a/arch/arm64/boot/dts/apple/t8012.dtsi
+++ b/arch/arm64/boot/dts/apple/t8012.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/interrupt-controller/apple-aic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
/ {
interrupt-parent = <&aic>;
@@ -220,6 +221,13 @@ pinctrl_aop: pinctrl@2100f0000 {
<AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>;
};
+ spmi: spmi@211180700 {
+ compatible = "apple,t8012-spmi", "apple,t8103-spmi";
+ reg = <0x2 0x11180700 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
pinctrl_nub: pinctrl@2111f0000 {
compatible = "apple,t8010-pinctrl", "apple,pinctrl";
reg = <0x2 0x111f0000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
index e238c2d..1d8da9c 100644
--- a/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
+++ b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
@@ -658,6 +658,7 @@ ps_pcie: power-controller@80318 {
#power-domain-cells = <0>;
#reset-cells = <0>;
label = "pcie";
+ power-domains = <&ps_pcie_aux>, <&ps_pcie_direct>, <&ps_pcie_ref>;
};
ps_pcie_aux: power-controller@80320 {
diff --git a/arch/arm64/boot/dts/apple/t8015.dtsi b/arch/arm64/boot/dts/apple/t8015.dtsi
index 12acf8f..586d3cf 100644
--- a/arch/arm64/boot/dts/apple/t8015.dtsi
+++ b/arch/arm64/boot/dts/apple/t8015.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/interrupt-controller/apple-aic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
/ {
interrupt-parent = <&aic>;
@@ -265,6 +266,62 @@ cpufreq_p: performance-controller@208ea0000 {
#performance-domain-cells = <0>;
};
+ i2c0: i2c@22e200000 {
+ compatible = "apple,t8015-i2c", "apple,i2c";
+ reg = <0x2 0x2e200000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@22e204000 {
+ compatible = "apple,t8015-i2c", "apple,i2c";
+ reg = <0x2 0x2e204000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@22e208000 {
+ compatible = "apple,t8015-i2c", "apple,i2c";
+ reg = <0x2 0x2e208000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@22e20c000 {
+ compatible = "apple,t8015-i2c", "apple,i2c";
+ reg = <0x2 0x2e20c000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ power-domains = <&ps_i2c3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
serial0: serial@22e600000 {
compatible = "apple,s5l-uart";
reg = <0x2 0x2e600000 0x0 0x4000>;
@@ -321,6 +378,26 @@ pinctrl_ap: pinctrl@233100000 {
<AIC_IRQ 54 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 55 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 56 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins: i2c0-pins {
+ pinmux = <APPLE_PINMUX(73, 1)>,
+ <APPLE_PINMUX(72, 1)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <APPLE_PINMUX(182, 1)>,
+ <APPLE_PINMUX(181, 1)>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinmux = <APPLE_PINMUX(4, 1)>,
+ <APPLE_PINMUX(3, 1)>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinmux = <APPLE_PINMUX(184, 1)>,
+ <APPLE_PINMUX(183, 1)>;
+ };
};
pinctrl_aop: pinctrl@2340f0000 {
@@ -344,6 +421,13 @@ pinctrl_aop: pinctrl@2340f0000 {
<AIC_IRQ 141 IRQ_TYPE_LEVEL_HIGH>;
};
+ spmi: spmi@235180700 {
+ compatible = "apple,t8015-spmi", "apple,t8103-spmi";
+ reg = <0x2 0x35180700 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
pinctrl_nub: pinctrl@2351f0000 {
compatible = "apple,t8015-pinctrl", "apple,pinctrl";
reg = <0x2 0x351f0000 0x0 0x4000>;
@@ -402,6 +486,40 @@ pinctrl_smc: pinctrl@236024000 {
*/
status = "disabled";
};
+
+ ans_mbox: mbox@257008000 {
+ compatible = "apple,t8015-asc-mailbox";
+ reg = <0x2 0x57008000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 265 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 266 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 267 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ power-domains = <&ps_ans2>;
+ };
+
+ sart: iommu@259c50000 {
+ compatible = "apple,t8015-sart";
+ reg = <0x2 0x59c50000 0x0 0x10000>;
+ power-domains = <&ps_ans2>;
+ };
+
+ nvme@259cc0000 {
+ compatible = "apple,t8015-nvme-ans2";
+ reg = <0x2 0x59cc0000 0x0 0x40000>,
+ <0x2 0x59d20000 0x0 0x2000>;
+ reg-names = "nvme", "ans";
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>;
+ mboxes = <&ans_mbox>;
+ apple,sart = <&sart>;
+ power-domains = <&ps_ans2>, <&ps_pcie>;
+ power-domain-names = "ans", "apcie0";
+ resets = <&ps_ans2>;
+ };
};
timer {
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index 152f95f..7089ccf 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -21,6 +21,14 @@ aliases {
};
};
+/*
+ * Adjust pcie0's iommu-map to account for the disabled port01.
+ */
+&pcie0 {
+ iommu-map = <0x100 &pcie0_dart_0 1 1>,
+ <0x200 &pcie0_dart_2 1 1>;
+};
+
&bluetooth0 {
brcm,board-type = "apple,santorini";
};
@@ -36,10 +44,10 @@ &wifi0 {
*/
&port02 {
- bus-range = <3 3>;
+ bus-range = <2 2>;
status = "okay";
ethernet0: ethernet@0,0 {
- reg = <0x30000 0x0 0x0 0x0 0x0>;
+ reg = <0x20000 0x0 0x0 0x0 0x0>;
/* To be filled by the loader */
local-mac-address = [00 10 18 00 00 00];
};
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 589ddc0..8b7b278 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -896,6 +896,41 @@ wdt: watchdog@23d2b0000 {
interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
};
+ smc: smc@23e400000 {
+ compatible = "apple,t8103-smc", "apple,smc";
+ reg = <0x2 0x3e400000 0x0 0x4000>,
+ <0x2 0x3fe00000 0x0 0x100000>;
+ reg-names = "smc", "sram";
+ mboxes = <&smc_mbox>;
+
+ smc_gpio: gpio {
+ compatible = "apple,smc-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ smc_reboot: reboot {
+ compatible = "apple,smc-reboot";
+ nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+ <&boot_error_count>, <&panic_count>;
+ nvmem-cell-names = "shutdown_flag", "boot_stage",
+ "boot_error_count", "panic_count";
+ };
+ };
+
+ smc_mbox: mbox@23e408000 {
+ compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x2 0x3e408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 400 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 401 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 402 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 403 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
pinctrl_smc: pinctrl@23e820000 {
compatible = "apple,t8103-pinctrl", "apple,pinctrl";
reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t8112-j415.dts b/arch/arm64/boot/dts/apple/t8112-j415.dts
new file mode 100644
index 0000000..b54e218
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j415.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (15-inch, M2, 2023)
+ *
+ * target-type: J415
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "apple,j415", "apple,t8112", "apple,arm-platform";
+ model = "Apple MacBook Air (15-inch, M2, 2023)";
+
+ aliases {
+ bluetooth0 = &bluetooth0;
+ wifi0 = &wifi0;
+ };
+
+ led-controller {
+ compatible = "pwm-leds";
+ led-0 {
+ pwms = <&fpwm1 0 40000>;
+ label = "kbd_backlight";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ max-brightness = <255>;
+ default-state = "keep";
+ };
+ };
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+ bus-range = <1 1>;
+ wifi0: wifi@0,0 {
+ compatible = "pci14e4,4433";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+ /* To be filled by the loader */
+ local-mac-address = [00 10 18 00 00 10];
+ apple,antenna-sku = "XX";
+ brcm,board-type = "apple,snake";
+ };
+
+ bluetooth0: bluetooth@0,1 {
+ compatible = "pci14e4,5f71";
+ reg = <0x10100 0x0 0x0 0x0 0x0>;
+ /* To be filled by the loader */
+ local-bd-address = [00 00 00 00 00 00];
+ brcm,board-type = "apple,snake";
+ };
+};
+
+&i2c0 {
+ /* MagSafe port */
+ hpm5: usb-pd@3a {
+ compatible = "apple,cd321x";
+ reg = <0x3a>;
+ interrupt-parent = <&pinctrl_ap>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "irq";
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&fpwm1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
index b36b345..3f79878 100644
--- a/arch/arm64/boot/dts/apple/t8112.dtsi
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -899,6 +899,41 @@ rtc_offset: rtc-offset@f900 {
};
};
+ smc: smc@23e400000 {
+ compatible = "apple,t8112-smc", "apple,smc";
+ reg = <0x2 0x3e400000 0x0 0x4000>,
+ <0x2 0x3fe00000 0x0 0x100000>;
+ reg-names = "smc", "sram";
+ mboxes = <&smc_mbox>;
+
+ smc_gpio: gpio {
+ compatible = "apple,smc-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ smc_reboot: reboot {
+ compatible = "apple,smc-reboot";
+ nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+ <&boot_error_count>, <&panic_count>;
+ nvmem-cell-names = "shutdown_flag", "boot_stage",
+ "boot_error_count", "panic_count";
+ };
+ };
+
+ smc_mbox: mbox@23e408000 {
+ compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x2 0x3e408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 499 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 500 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 501 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
pinctrl_smc: pinctrl@23e820000 {
compatible = "apple,t8112-pinctrl", "apple,pinctrl";
reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
index 6ea3c10..04738bf 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -2,6 +2,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "bcm2712.dtsi"
/ {
@@ -29,6 +30,20 @@ memory@0 {
reg = <0 0 0 0x28000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_button_default>;
+ status = "okay";
+
+ power_button: power-button {
+ label = "pwr_button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <50>;
+ };
+ };
+
sd_io_1v8_reg: sd-io-1v8-reg {
compatible = "regulator-gpio";
regulator-name = "vdd-sd-io";
@@ -51,6 +66,90 @@ sd_vcc_reg: sd-vcc-reg {
enable-active-high;
gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
};
+
+ wl_on_reg: wl-on-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "wl-on-regulator";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-0 = <&wl_on_default>;
+ pinctrl-names = "default";
+ gpio = <&gio 28 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <150000>;
+ enable-active-high;
+ };
+};
+
+&pinctrl {
+ bt_shutdown_default: bt-shutdown-default-state {
+ function = "gpio";
+ pins = "gpio29";
+ };
+
+ emmc_sd_default: emmc-sd-default-state {
+ pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
+ bias-pull-up;
+ };
+
+ pwr_button_default: pwr-button-default-state {
+ function = "gpio";
+ pins = "gpio20";
+ bias-pull-up;
+ };
+
+ sdio2_30_default: sdio2-30-default-state {
+ clk-pins {
+ function = "sd2";
+ pins = "gpio30";
+ bias-disable;
+ };
+ cmd-pins {
+ function = "sd2";
+ pins = "gpio31";
+ bias-pull-up;
+ };
+ dat-pins {
+ function = "sd2";
+ pins = "gpio32", "gpio33", "gpio34", "gpio35";
+ bias-pull-up;
+ };
+ };
+
+ uarta_24_default: uarta-24-default-state {
+ rts-pins {
+ function = "uart0";
+ pins = "gpio24";
+ bias-disable;
+ };
+ cts-pins {
+ function = "uart0";
+ pins = "gpio25";
+ bias-pull-up;
+ };
+ txd-pins {
+ function = "uart0";
+ pins = "gpio26";
+ bias-disable;
+ };
+ rxd-pins {
+ function = "uart0";
+ pins = "gpio27";
+ bias-pull-up;
+ };
+ };
+
+ wl_on_default: wl-on-default-state {
+ function = "gpio";
+ pins = "gpio28";
+ };
+};
+
+&pinctrl_aon {
+ emmc_aon_cd_default: emmc-aon-cd-default-state {
+ function = "sd_card_g";
+ pins = "aon_gpio5";
+ bias-pull-up;
+ };
};
/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
@@ -62,12 +161,32 @@ &uart10 {
/* SDIO1 is used to drive the SD card */
&sdio1 {
+ pinctrl-0 = <&emmc_sd_default>, <&emmc_aon_cd_default>;
+ pinctrl-names = "default";
vqmmc-supply = <&sd_io_1v8_reg>;
vmmc-supply = <&sd_vcc_reg>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-ddr50;
sd-uhs-sdr104;
+ cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>;
+};
+
+&sdio2 {
+ pinctrl-0 = <&sdio2_30_default>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ vmmc-supply = <&wl_on_reg>;
+ sd-uhs-ddr50;
+ non-removable;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
};
&soc {
@@ -97,6 +216,20 @@ power: power {
};
};
+/* uarta communicates with the BT module */
+&uarta {
+ uart-has-rtscts;
+ pinctrl-0 = <&uarta_24_default &bt_shutdown_default>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ bluetooth: bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+ shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&hvs {
clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
clock-names = "core", "disp";
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index a70a9b1..b8f2565 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -4,8 +4,14 @@
* the RP1 driver to load the RP1 dtb overlay at runtime, while
* bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
* already contains RP1 node, so no overlay is loaded nor needed).
- * This file is not intended to be modified, nodes should be added
- * to the included bcm2712-rpi-5-b-ovl-rp1.dts.
+ * This file is intended to host the override nodes for the RP1 peripherals,
+ * e.g. to declare the phy of the ethernet interface or the custom pin setup
+ * for several RP1 peripherals.
+ * This in turn is due to the fact that there's no current generic
+ * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that
+ * are not yet defined in the DT since they are loaded at runtime via overlay.
+ * All other nodes that do not have anything to do with RP1 should be added
+ * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead.
*/
/dts-v1/;
@@ -16,10 +22,37 @@ &pcie2 {
#include "rp1-nexus.dtsi"
};
-&pcie1 {
+&rp1_eth {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy1>;
+
+ mdio {
+ reg = <0x1>;
+ reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <5000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+};
+
+&rp1_gpio {
+ usb_vbus_default_state: usb-vbus-default-state {
+ function = "vbus1";
+ groups = "vbus1";
+ };
+};
+
+&rp1_usb0 {
+ pinctrl-0 = <&usb_vbus_default_state>;
+ pinctrl-names = "default";
status = "okay";
};
-&pcie2 {
+&rp1_usb1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 0a9212d..e77a66a 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -38,6 +38,13 @@ clk_emmc2: clk-emmc2 {
clock-frequency = <200000000>;
clock-output-names = "emmc2-clock";
};
+
+ clk_sw_baud: clk-sw-baud {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <96000000>;
+ clock-output-names = "sw-baud";
+ };
};
cpus: cpus {
@@ -243,6 +250,39 @@ uart10: serial@7d001000 {
status = "disabled";
};
+ pinctrl: pinctrl@7d504100 {
+ compatible = "brcm,bcm2712c0-pinctrl";
+ reg = <0x7d504100 0x30>;
+ };
+
+ gio: gpio@7d508500 {
+ compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+ reg = <0x7d508500 0x40>;
+ interrupt-parent = <&main_irq>;
+ interrupts = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ brcm,gpio-bank-widths = <32 22>;
+ };
+
+ uarta: serial@7d50c000 {
+ compatible = "brcm,bcm7271-uart";
+ reg = <0x7d50c000 0x20>;
+ reg-names = "uart";
+ clocks = <&clk_sw_baud>;
+ clock-names = "sw_baud";
+ interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart";
+ status = "disabled";
+ };
+
+ pinctrl_aon: pinctrl@7d510700 {
+ compatible = "brcm,bcm2712c0-aon-pinctrl";
+ reg = <0x7d510700 0x20>;
+ };
+
interrupt-controller@7d517000 {
compatible = "brcm,bcm7271-l2-intc";
reg = <0x7d517000 0x10>;
@@ -263,6 +303,21 @@ gio_aon: gpio@7d517c00 {
*/
};
+ sdio2: mmc@1100000 {
+ compatible = "brcm,bcm2712-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x01100000 0x260>,
+ <0x01100400 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_emmc2>;
+ clock-names = "sw_sdio";
+ sdhci-caps-mask = <0x0000C000 0x0>;
+ sdhci-caps = <0x0 0x0>;
+ mmc-ddr-3_3v;
+ status = "disabled";
+ };
+
gicv2: interrupt-controller@7fff9000 {
compatible = "arm,gic-400";
reg = <0x7fff9000 0x1000>,
@@ -270,6 +325,7 @@ gicv2: interrupt-controller@7fff9000 {
<0x7fffc000 0x2000>,
<0x7fffe000 0x2000>;
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
};
diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
index 5002a37..5a815c37 100644
--- a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -39,4 +39,48 @@ rp1_gpio: pinctrl@400d0000 {
<1 IRQ_TYPE_LEVEL_HIGH>,
<2 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ rp1_eth: ethernet@40100000 {
+ compatible = "raspberrypi,rp1-gem";
+ reg = <0x00 0x40100000 0x0 0x4000>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rp1_clocks RP1_CLK_SYS>,
+ <&rp1_clocks RP1_CLK_SYS>,
+ <&rp1_clocks RP1_CLK_ETH>,
+ <&rp1_clocks RP1_CLK_ETH_TSU>;
+ clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+ local-mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ rp1_usb0: usb@40200000 {
+ compatible = "snps,dwc3";
+ reg = <0x00 0x40200000 0x0 0x100000>;
+ interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+ dr_mode = "host";
+ usb3-lpm-capable;
+ snps,dis_rxdet_inp3_quirk;
+ snps,parkmode-disable-hs-quirk;
+ snps,parkmode-disable-ss-quirk;
+ snps,tx-max-burst = /bits/ 8 <8>;
+ snps,tx-thr-num-pkt = /bits/ 8 <2>;
+ status = "disabled";
+ };
+
+ rp1_usb1: usb@40300000 {
+ compatible = "snps,dwc3";
+ reg = <0x00 0x40300000 0x0 0x100000>;
+ interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+ dr_mode = "host";
+ usb3-lpm-capable;
+ snps,dis_rxdet_inp3_quirk;
+ snps,parkmode-disable-hs-quirk;
+ snps,parkmode-disable-ss-quirk;
+ snps,tx-max-burst = /bits/ 8 <8>;
+ snps,tx-thr-num-pkt = /bits/ 8 <2>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index 7dfe7677..2fb2c99 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -192,6 +192,78 @@ soc@0 {
#address-cells = <2>;
#size-cells = <2>;
+ i2c0: i2c@4010000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04010000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@4020000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04020000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@4030000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04030000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@4040000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04040000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@4050000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04050000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@4060000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04060000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@4070000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04070000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@4080000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x04080000 0x0 0x10000>;
+ clock-frequency = <400000>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>;
+ interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
uart0: serial@40b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0x040b0000 0x0 0x1000>;
@@ -228,6 +300,34 @@ uart3: serial@40e0000 {
status = "disabled";
};
+ i3c0: i3c@40f0000 {
+ compatible = "cdns,i3c-master";
+ reg = <0x0 0x040f0000 0x0 0x10000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I3C0_APB>,
+ <&scmi_clk CLK_TREE_FCH_I3C0_FUNC>;
+ clock-names = "pclk", "sysclk";
+ i3c-scl-hz = <400000>;
+ i2c-scl-hz = <100000>;
+ status = "disabled";
+ };
+
+ i3c1: i3c@4100000 {
+ compatible = "cdns,i3c-master";
+ reg = <0x0 0x04100000 0x0 0x10000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&scmi_clk CLK_TREE_FCH_I3C1_APB>,
+ <&scmi_clk CLK_TREE_FCH_I3C1_FUNC>;
+ clock-names = "pclk", "sysclk";
+ i3c-scl-hz = <400000>;
+ i2c-scl-hz = <100000>;
+ status = "disabled";
+ };
+
mbox_ap2se: mailbox@5060000 {
compatible = "cix,sky1-mbox";
reg = <0x0 0x05060000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index bdb9e98..bcca631 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+subdir-y += axis
subdir-y += google
dtb-$(CONFIG_ARCH_EXYNOS) += \
diff --git a/arch/arm64/boot/dts/exynos/axis/Makefile b/arch/arm64/boot/dts/exynos/axis/Makefile
new file mode 100644
index 0000000..ccf00de6
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_ARTPEC) += \
+ artpec8-grizzly.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
new file mode 100644
index 0000000..2c151aa
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Axis ARTPEC-8 SoC device tree pinctrl constants
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ * https://www.samsung.com
+ * Copyright (c) 2025 Axis Communications AB.
+ * https://www.axis.com
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+
+#define ARTPEC_PIN_PULL_NONE 0
+#define ARTPEC_PIN_PULL_DOWN 1
+#define ARTPEC_PIN_PULL_UP 3
+
+#define ARTPEC_PIN_FUNC_INPUT 0
+#define ARTPEC_PIN_FUNC_OUTPUT 1
+#define ARTPEC_PIN_FUNC_2 2
+#define ARTPEC_PIN_FUNC_3 3
+#define ARTPEC_PIN_FUNC_4 4
+#define ARTPEC_PIN_FUNC_5 5
+#define ARTPEC_PIN_FUNC_6 6
+#define ARTPEC_PIN_FUNC_EINT 0xf
+#define ARTPEC_PIN_FUNC_F ARTPEC_PIN_FUNC_EINT
+
+/* Drive strength for ARTPEC */
+#define ARTPEC_PIN_DRV_SR1 0x8
+#define ARTPEC_PIN_DRV_SR2 0x9
+#define ARTPEC_PIN_DRV_SR3 0xa
+#define ARTPEC_PIN_DRV_SR4 0xb
+#define ARTPEC_PIN_DRV_SR5 0xc
+#define ARTPEC_PIN_DRV_SR6 0xd
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
new file mode 100644
index 0000000..5ae864e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 Grizzly board device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ * https://www.samsung.com
+ * Copyright (c) 2025 Axis Communications AB.
+ * https://www.axis.com
+ */
+
+/dts-v1/;
+#include "artpec8.dtsi"
+#include "artpec8-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+ model = "ARTPEC-8 grizzly board";
+ compatible = "axis,artpec8-grizzly", "axis,artpec8";
+
+ aliases {
+ serial0 = &serial_0;
+ };
+
+ chosen {
+ stdout-path = &serial_0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+};
+
+&osc_clk {
+ clock-frequency = <50000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
new file mode 100644
index 0000000..8d239a7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ * https://www.samsung.com
+ * Copyright (c) 2025 Axis Communications AB.
+ * https://www.axis.com
+ */
+
+#include "artpec-pinctrl.h"
+
+&pinctrl_fsys {
+ gpe0: gpe0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe1: gpe1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe2: gpe2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf3: gpf3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf4: gpf4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gps0: gps0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gps1: gps1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ serial0_bus: serial0-bus-pins {
+ samsung,pins = "gpf4-4", "gpf4-5";
+ samsung,pin-function = <ARTPEC_PIN_FUNC_2>;
+ samsung,pin-pud = <ARTPEC_PIN_PULL_UP>;
+ samsung,pin-drv = <ARTPEC_PIN_DRV_SR3>;
+ };
+};
+
+&pinctrl_peric {
+ gpa0: gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk0: gpk0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
new file mode 100644
index 0000000..db98332
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ * https://www.samsung.com
+ * Copyright (c) 2025 Axis Communications AB.
+ * https://www.axis.com
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec8-clk.h>
+
+/ {
+ compatible = "axis,artpec8";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ pinctrl0 = &pinctrl_fsys;
+ pinctrl1 = &pinctrl_peric;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&cpu_sleep>;
+ clocks = <&cmu_cpucl CLK_GOUT_CPUCL_CLUSTER_CPU>;
+ clock-names = "cpu";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ cpu-idle-states = <&cpu_sleep>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ enable-method = "psci";
+ cpu-idle-states = <&cpu_sleep>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ enable-method = "psci";
+ cpu-idle-states = <&cpu_sleep>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ cpu_sleep: cpu-sleep {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2000>;
+ };
+ };
+ };
+
+ fin_pll: clock-finpll {
+ compatible = "fixed-factor-clock";
+ clocks = <&osc_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "fin_pll";
+ };
+
+ osc_clk: clock-osc {
+ /* XXTI */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "osc_clk";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0x0 0x17000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cmu_imem: clock-controller@10010000 {
+ compatible = "axis,artpec8-cmu-imem";
+ reg = <0x10010000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&cmu_cmu CLK_DOUT_CMU_IMEM_ACLK>,
+ <&cmu_cmu CLK_DOUT_CMU_IMEM_JPEG>;
+ clock-names = "fin_pll", "aclk", "jpeg";
+ };
+
+ timer@10040000 {
+ compatible = "axis,artpec8-mct", "samsung,exynos4210-mct";
+ reg = <0x10040000 0x1000>;
+ clocks = <&fin_pll>, <&cmu_imem CLK_GOUT_IMEM_MCT_PCLK>;
+ clock-names = "fin_pll", "mct";
+ interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gic: interrupt-controller@10201000 {
+ compatible = "arm,gic-400";
+ reg = <0x10201000 0x1000>,
+ <0x10202000 0x2000>,
+ <0x10204000 0x2000>,
+ <0x10206000 0x2000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ cmu_cpucl: clock-controller@11410000 {
+ compatible = "axis,artpec8-cmu-cpucl";
+ reg = <0x11410000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&cmu_cmu CLK_DOUT_CMU_CPUCL_SWITCH>;
+ clock-names = "fin_pll", "switch";
+ };
+
+ cmu_cmu: clock-controller@12400000 {
+ compatible = "axis,artpec8-cmu-cmu";
+ reg = <0x12400000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>;
+ clock-names = "fin_pll";
+ };
+
+ cmu_core: clock-controller@12410000 {
+ compatible = "axis,artpec8-cmu-core";
+ reg = <0x12410000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&cmu_cmu CLK_DOUT_CMU_CORE_MAIN>,
+ <&cmu_cmu CLK_DOUT_CMU_CORE_DLP>;
+ clock-names = "fin_pll", "main", "dlp";
+ };
+
+ cmu_bus: clock-controller@12c10000 {
+ compatible = "axis,artpec8-cmu-bus";
+ reg = <0x12c10000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&cmu_cmu CLK_DOUT_CMU_BUS>,
+ <&cmu_cmu CLK_DOUT_CMU_BUS_DLP>;
+ clock-names = "fin_pll", "bus", "dlp";
+ };
+
+ cmu_peri: clock-controller@16410000 {
+ compatible = "axis,artpec8-cmu-peri";
+ reg = <0x16410000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&cmu_cmu CLK_DOUT_CMU_PERI_IP>,
+ <&cmu_cmu CLK_DOUT_CMU_PERI_AUDIO>,
+ <&cmu_cmu CLK_DOUT_CMU_PERI_DISP>;
+ clock-names = "fin_pll", "ip", "audio", "disp";
+ };
+
+ pinctrl_peric: pinctrl@165f0000 {
+ compatible = "axis,artpec8-pinctrl";
+ reg = <0x165f0000 0x1000>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cmu_fsys: clock-controller@16c10000 {
+ compatible = "axis,artpec8-cmu-fsys";
+ reg = <0x16c10000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN0>,
+ <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN1>,
+ <&cmu_cmu CLK_DOUT_CMU_FSYS_BUS>,
+ <&cmu_cmu CLK_DOUT_CMU_FSYS_IP>;
+ clock-names = "fin_pll", "scan0", "scan1", "bus", "ip";
+ };
+
+ pinctrl_fsys: pinctrl@16c30000 {
+ compatible = "axis,artpec8-pinctrl";
+ reg = <0x16c30000 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ serial_0: serial@16cc0000 {
+ compatible = "axis,artpec8-uart";
+ reg = <0x16cc0000 0x100>;
+ clocks = <&cmu_fsys CLK_GOUT_FSYS_UART0_PCLK>,
+ <&cmu_fsys CLK_GOUT_FSYS_UART0_SCLK_UART>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial0_bus>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
index f618ff2..5877da7 100644
--- a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
@@ -1438,7 +1438,7 @@ i3c11_bus: i3c11-bus-pins {
samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
};
- hsi223_bus: hsi2c23-bus-pins {
+ hsi2c23_bus: hsi2c23-bus-pins {
samsung,pins = "gpp11-2", "gpp11-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
index 6b5ac02..6487ccb 100644
--- a/arch/arm64/boot/dts/exynos/exynos2200.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/samsung,exynos2200-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
/ {
compatible = "samsung,exynos2200";
@@ -221,22 +222,22 @@ psci {
method = "smc";
};
- soc {
+ soc@0 {
compatible = "simple-bus";
- ranges;
+ ranges = <0x0 0x0 0x0 0x20000000>;
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
chipid@10000000 {
compatible = "samsung,exynos2200-chipid",
"samsung,exynos850-chipid";
- reg = <0x0 0x10000000 0x0 0x24>;
+ reg = <0x10000000 0x24>;
};
cmu_peris: clock-controller@10020000 {
compatible = "samsung,exynos2200-cmu-peris";
- reg = <0x0 0x10020000 0x0 0x8000>;
+ reg = <0x10020000 0x8000>;
#clock-cells = <1>;
clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>,
@@ -250,7 +251,7 @@ cmu_peris: clock-controller@10020000 {
mct_peris: timer@10040000 {
compatible = "samsung,exynos2200-mct-peris",
"samsung,exynos4210-mct";
- reg = <0x0 0x10040000 0x0 0x800>;
+ reg = <0x10040000 0x800>;
clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>;
clock-names = "fin_pll", "mct";
interrupts = <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -270,9 +271,10 @@ mct_peris: timer@10040000 {
gic: interrupt-controller@10200000 {
compatible = "arm,gic-v3";
- reg = <0x0 0x10200000 0x0 0x10000>, /* GICD */
- <0x0 0x10240000 0x0 0x200000>; /* GICR * 8 */
+ reg = <0x10200000 0x10000>, /* GICD */
+ <0x10240000 0x200000>; /* GICR * 8 */
+ #address-cells = <0>;
#interrupt-cells = <4>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -294,7 +296,7 @@ ppi_cluster2: interrupt-partition-2 {
cmu_peric0: clock-controller@10400000 {
compatible = "samsung,exynos2200-cmu-peric0";
- reg = <0x0 0x10400000 0x0 0x8000>;
+ reg = <0x10400000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>,
@@ -306,17 +308,87 @@ cmu_peric0: clock-controller@10400000 {
syscon_peric0: syscon@10420000 {
compatible = "samsung,exynos2200-peric0-sysreg", "syscon";
- reg = <0x0 0x10420000 0x0 0x2000>;
+ reg = <0x10420000 0x10000>;
};
pinctrl_peric0: pinctrl@10430000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x10430000 0x0 0x1000>;
+ reg = <0x10430000 0x1000>;
+ };
+
+ usi4: usi@105000c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x105000c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric0 0x1024>;
+ status = "disabled";
+
+ hsi2c_8: i2c@10500000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10500000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_DOUT_PERIC0_USI04>,
+ <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c8_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_6: serial@10500000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x10500000 0xc0>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart6_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi4_i2c: usi@105100c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x105100c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric0 0x1024>;
+ status = "disabled";
+
+ hsi2c_9: i2c@10510000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10510000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric0 CLK_DOUT_PERIC0_I2C>,
+ <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c9_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
};
cmu_peric1: clock-controller@10700000 {
compatible = "samsung,exynos2200-cmu-peric1";
- reg = <0x0 0x10700000 0x0 0x8000>;
+ reg = <0x10700000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>,
@@ -328,23 +400,304 @@ cmu_peric1: clock-controller@10700000 {
syscon_peric1: syscon@10720000 {
compatible = "samsung,exynos2200-peric1-sysreg", "syscon";
- reg = <0x0 0x10720000 0x0 0x2000>;
+ reg = <0x10720000 0x10000>;
};
pinctrl_peric1: pinctrl@10730000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x10730000 0x0 0x1000>;
+ reg = <0x10730000 0x1000>;
+ };
+
+ usi7: usi@109000c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109000c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric1 0x2030>;
+ status = "disabled";
+
+ hsi2c_14: i2c@10900000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10900000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07>,
+ <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c14_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_9: serial@10900000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x10900000 0xc0>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart9_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi7_i2c: usi@109100c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109100c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric1 0x2034>;
+ status = "disabled";
+
+ hsi2c_15: i2c@10910000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10910000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>,
+ <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c15_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi8: usi@109200c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109200c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric1 0x2038>;
+ status = "disabled";
+
+ hsi2c_16: i2c@10920000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10920000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08>,
+ <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c16_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_10: serial@10920000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x10920000 0xc0>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart10_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi8_i2c: usi@109300c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109300c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric1 0x203c>;
+ status = "disabled";
+
+ hsi2c_17: i2c@10930000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10930000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>,
+ <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c17_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi9: usi@109400c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109400c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric1 0x2040>;
+ status = "disabled";
+
+ hsi2c_18: i2c@10940000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10940000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI09>,
+ <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c18_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_11: serial@10940000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x10940000 0xc0>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart11_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi9_i2c: usi@109500c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109500c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric1 0x2044>;
+ status = "disabled";
+
+ hsi2c_19: i2c@10950000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10950000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+ <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c19_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi10: usi@109600c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109600c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric1 0x2048>;
+ status = "disabled";
+
+ hsi2c_20: i2c@10960000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10960000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI10>,
+ <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c20_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_12: serial@10960000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x10960000 0xc0>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart12_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi10_i2c: usi@109700c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x109700c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric1 0x204c>;
+ status = "disabled";
+
+ hsi2c_21: i2c@10970000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x10970000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+ <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c21_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
};
cmu_hsi0: clock-controller@10a00000 {
compatible = "samsung,exynos2200-cmu-hsi0";
- reg = <0x0 0x10a00000 0x0 0x8000>;
+ reg = <0x10a00000 0x8000>;
#clock-cells = <1>;
};
usb32drd: phy@10aa0000 {
compatible = "samsung,exynos2200-usb32drd-phy";
- reg = <0x0 0x10aa0000 0x0 0x10000>;
+ reg = <0x10aa0000 0x10000>;
clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
clock-names = "phy";
@@ -360,7 +713,7 @@ usb32drd: phy@10aa0000 {
usb_hsphy: phy@10ab0000 {
compatible = "samsung,exynos2200-eusb2-phy";
- reg = <0x0 0x10ab0000 0x0 0x10000>;
+ reg = <0x10ab0000 0x10000>;
clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>,
<&cmu_hsi0 CLK_MOUT_HSI0_NOC>,
@@ -374,7 +727,7 @@ usb_hsphy: phy@10ab0000 {
usb: usb@10b00000 {
compatible = "samsung,exynos2200-dwusb3";
- ranges = <0x0 0x0 0x10b00000 0x10000>;
+ ranges = <0x0 0x10b00000 0x10000>;
clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
clock-names = "link_aclk";
@@ -406,7 +759,7 @@ usb_dwc3: usb@0 {
cmu_ufs: clock-controller@11000000 {
compatible = "samsung,exynos2200-cmu-ufs";
- reg = <0x0 0x11000000 0x0 0x8000>;
+ reg = <0x11000000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>,
@@ -418,27 +771,27 @@ cmu_ufs: clock-controller@11000000 {
syscon_ufs: syscon@11020000 {
compatible = "samsung,exynos2200-ufs-sysreg", "syscon";
- reg = <0x0 0x11020000 0x0 0x2000>;
+ reg = <0x11020000 0x10000>;
};
pinctrl_ufs: pinctrl@11040000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x11040000 0x0 0x1000>;
+ reg = <0x11040000 0x1000>;
};
pinctrl_hsi1ufs: pinctrl@11060000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x11060000 0x0 0x1000>;
+ reg = <0x11060000 0x1000>;
};
pinctrl_hsi1: pinctrl@11240000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x11240000 0x0 0x1000>;
+ reg = <0x11240000 0x1000>;
};
cmu_peric2: clock-controller@11c00000 {
compatible = "samsung,exynos2200-cmu-peric2";
- reg = <0x0 0x11c00000 0x0 0x8000>;
+ reg = <0x11c00000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>,
@@ -450,17 +803,507 @@ cmu_peric2: clock-controller@11c00000 {
syscon_peric2: syscon@11c20000 {
compatible = "samsung,exynos2200-peric2-sysreg", "syscon";
- reg = <0x0 0x11c20000 0x0 0x4000>;
+ reg = <0x11c20000 0x10000>;
};
pinctrl_peric2: pinctrl@11c30000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x11c30000 0x0 0x1000>;
+ reg = <0x11c30000 0x1000>;
+ };
+
+ usi0: usi@11d000c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d000c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric2 0x2000>;
+ status = "disabled";
+
+ hsi2c_0: i2c@11d00000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d00000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c0_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_2: serial@11d00000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11d00000 0xc0>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart2_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi0_i2c: usi@11d100c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d100c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric2 0x2004>;
+ status = "disabled";
+
+ hsi2c_1: i2c@11d10000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d10000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c1_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi1: usi@11d200c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d200c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric2 0x2008>;
+ status = "disabled";
+
+ hsi2c_2: i2c@11d20000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d20000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c2_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_3: serial@11d20000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11d20000 0xc0>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart3_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi1_i2c: usi@11d300c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d300c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric2 0x200c>;
+ status = "disabled";
+
+ hsi2c_3: i2c@11d30000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d30000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 705 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c3_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi2: usi@11d400c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d400c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric2 0x2010>;
+ status = "disabled";
+
+ hsi2c_4: i2c@11d40000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d40000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI02>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c4_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_4: serial@11d40000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11d40000 0xc0>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart4_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+ };
+
+ usi2_i2c: usi@11d500c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d500c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric2 0x2014>;
+ status = "disabled";
+
+ hsi2c_5: i2c@11d50000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d50000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c5_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi3: usi@11d600c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d600c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric2 0x2018>;
+ status = "disabled";
+
+ hsi2c_6: i2c@11d60000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d60000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI03>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c6_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_5: serial@11d60000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11d60000 0xc0>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart5_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+ };
+
+ usi3_i2c: usi@11d700c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d700c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric2 0x201c>;
+ status = "disabled";
+
+ hsi2c_7: i2c@11d70000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d70000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c7_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi5_i2c: usi@11d800c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d800c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric2 0x102c>;
+ status = "disabled";
+
+ hsi2c_11: i2c@11d80000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d80000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c11_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi6_i2c: usi@11d900c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11d900c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric2 0x1004>;
+ status = "disabled";
+
+ hsi2c_13: i2c@11d90000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11d90000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c13_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi11: usi@11da00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11da00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric2 0x1058>;
+ status = "disabled";
+
+ hsi2c_22: i2c@11da0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11da0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI11>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c22_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_13: serial@11da0000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11da0000 0xc0>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart13_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi11_i2c: usi@11db00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11db00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_peric2 0x105c>;
+ status = "disabled";
+
+ hsi2c_23: i2c@11db0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11db0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c23_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi5: usi@11dd00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11dd00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric2 0x117c>;
+ status = "disabled";
+
+ hsi2c_10: i2c@11dd0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11dd0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI05>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c10_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_7: serial@11dd0000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11dd0000 0xc0>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart7_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+ };
+
+ usi6: usi@11de00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x11de00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_peric2 0x1180>;
+ status = "disabled";
+
+ hsi2c_12: i2c@11de0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x11de0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI06>,
+ <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c12_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_8: serial@11de0000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11de0000 0xc0>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart8_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
};
cmu_cmgp: clock-controller@14e00000 {
compatible = "samsung,exynos2200-cmu-cmgp";
- reg = <0x0 0x14e00000 0x0 0x8000>;
+ reg = <0x14e00000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>,
@@ -471,12 +1314,12 @@ cmu_cmgp: clock-controller@14e00000 {
syscon_cmgp: syscon@14e20000 {
compatible = "samsung,exynos2200-cmgp-sysreg", "syscon";
- reg = <0x0 0x14e20000 0x0 0x2000>;
+ reg = <0x14e20000 0x10000>;
};
pinctrl_cmgp: pinctrl@14e30000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x14e30000 0x0 0x1000>;
+ reg = <0x14e30000 0x1000>;
wakeup-interrupt-controller {
compatible = "samsung,exynos2200-wakeup-eint",
@@ -485,9 +1328,528 @@ wakeup-interrupt-controller {
};
};
+ usi_cmgp0: usi@14f000c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f000c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_cmgp 0x2000>;
+ status = "disabled";
+
+ hsi2c_24: i2c@14f00000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f00000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI0>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c24_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_14: serial@14f00000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x14f00000 0xc0>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart14_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp0: usi@14f100c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f100c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2070>;
+ status = "disabled";
+
+ hsi2c_25: i2c@14f10000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f10000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c25_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi_cmgp1: usi@14f200c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f200c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_cmgp 0x2010>;
+ status = "disabled";
+
+ hsi2c_26: i2c@14f20000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f20000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI1>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c26_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_15: serial@14f20000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x14f20000 0xc0>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart15_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp1: usi@14f300c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f300c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2074>;
+ status = "disabled";
+
+ hsi2c_27: i2c@14f30000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f30000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c27_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi_cmgp2: usi@14f400c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f400c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_cmgp 0x2020>;
+ status = "disabled";
+
+ hsi2c_28: i2c@14f40000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f40000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI2>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c28_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_16: serial@14f40000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x14f40000 0xc0>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart16_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp2: usi@14f500c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f500c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2024>;
+ status = "disabled";
+
+ hsi2c_29: i2c@14f50000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f50000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c29_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi_cmgp3: usi@14f600c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f600c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_cmgp 0x2030>;
+ status = "disabled";
+
+ hsi2c_30: i2c@14f60000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f60000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI3>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c30_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_17: serial@14f60000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x14f60000 0xc0>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart17_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp3: usi@14f700c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f700c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2034>;
+ status = "disabled";
+
+ hsi2c_31: i2c@14f70000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f70000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c31_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi_cmgp4: usi@14f800c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f800c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_cmgp 0x2040>;
+ status = "disabled";
+
+ hsi2c_32: i2c@14f80000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f80000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI4>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c32_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_18: serial@14f80000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x14f80000 0xc0>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart18_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp4: usi@14f900c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14f900c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2044>;
+ status = "disabled";
+
+ hsi2c_33: i2c@14f90000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14f90000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c33_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi_cmgp5: usi@14fa00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14fa00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_cmgp 0x2050>;
+ status = "disabled";
+
+ hsi2c_34: i2c@14fa0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14fa0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI5>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c34_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_19: serial@14fa0000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x14fa0000 0xc0>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart19_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp5: usi@14fb00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14fb00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2054>;
+ status = "disabled";
+
+ hsi2c_35: i2c@14fb0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14fb0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c35_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi_cmgp6: usi@14fc00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14fc00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+ clock-names = "pclk", "ipclk";
+ samsung,sysreg = <&syscon_cmgp 0x2060>;
+ status = "disabled";
+
+ hsi2c_36: i2c@14fc0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14fc0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI6>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c36_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ serial_20: serial@14fc0000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x14fc0000 0xc0>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart20_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <64>;
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp6: usi@14fd00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14fd00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2064>;
+ status = "disabled";
+
+ hsi2c_37: i2c@14fd0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14fd0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c37_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
+ usi_i2c_cmgp7: usi@14fe00c0 {
+ compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+ reg = <0x14fe00c0 0x20>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+ <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+ clock-names = "pclk", "ipclk";
+ samsung,mode = <USI_MODE_I2C>;
+ samsung,sysreg = <&syscon_cmgp 0x2080>;
+ status = "disabled";
+
+ hsi2c_38: i2c@14fe0000 {
+ compatible = "samsung,exynos2200-hsi2c",
+ "samsung,exynosautov9-hsi2c";
+ reg = <0x14fe0000 0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+ <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&hsi2c38_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+ };
+
cmu_vts: clock-controller@15300000 {
compatible = "samsung,exynos2200-cmu-vts";
- reg = <0x0 0x15300000 0x0 0x8000>;
+ reg = <0x15300000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>,
@@ -497,12 +1859,12 @@ cmu_vts: clock-controller@15300000 {
pinctrl_vts: pinctrl@15320000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x15320000 0x0 0x1000>;
+ reg = <0x15320000 0x1000>;
};
cmu_alive: clock-controller@15800000 {
compatible = "samsung,exynos2200-cmu-alive";
- reg = <0x0 0x15800000 0x0 0x8000>;
+ reg = <0x15800000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>,
@@ -512,7 +1874,7 @@ cmu_alive: clock-controller@15800000 {
pinctrl_alive: pinctrl@15850000 {
compatible = "samsung,exynos2200-pinctrl";
- reg = <0x0 0x15850000 0x0 0x1000>;
+ reg = <0x15850000 0x1000>;
wakeup-interrupt-controller {
compatible = "samsung,exynos2200-wakeup-eint",
@@ -524,7 +1886,7 @@ wakeup-interrupt-controller {
pmu_system_controller: system-controller@15860000 {
compatible = "samsung,exynos2200-pmu",
"samsung,exynos7-pmu", "syscon";
- reg = <0x0 0x15860000 0x0 0x10000>;
+ reg = <0x15860000 0x10000>;
reboot: syscon-reboot {
compatible = "syscon-reboot";
@@ -536,7 +1898,7 @@ reboot: syscon-reboot {
cmu_top: clock-controller@1a320000 {
compatible = "samsung,exynos2200-cmu-top";
- reg = <0x0 0x1a320000 0x0 0x8000>;
+ reg = <0x1a320000 0x8000>;
#clock-cells = <1>;
clocks = <&xtcxo>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 0b9053b..fa2029e 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -937,6 +937,7 @@ reboot: syscon-reboot {
gic: interrupt-controller@11001000 {
compatible = "arm,gic-400";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x11001000 0x1000>,
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index 7d70a32..ab076d3 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -21,6 +21,7 @@ / {
compatible = "winlink,e850-96", "samsung,exynos850";
aliases {
+ ethernet0 = ðernet;
mmc0 = &mmc_0;
serial0 = &serial_0;
};
@@ -241,10 +242,24 @@ &usbdrd {
};
&usbdrd_dwc3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
dr_mode = "otg";
usb-role-switch;
role-switch-default-mode = "host";
+ hub@1 {
+ compatible = "usb424,9514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: ethernet@1 {
+ compatible = "usb424,ec00";
+ reg = <1>;
+ };
+ };
+
port {
usb1_drd_sw: endpoint {
remote-endpoint = <&usb_dr_connector>;
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
index 51e9c9c..16903ce 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
@@ -202,7 +202,7 @@ bt_btwake: bt-btwake-pins {
};
bt_en: bt-en-pins {
- samsung,pins ="gpj1-7";
+ samsung,pins = "gpj1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
diff --git a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
index 36a6f137..9f0ad4f 100644
--- a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
+++ b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
@@ -44,6 +44,12 @@ memory@80000000 {
<0x8 0x80000000 0x1 0x7ec00000>;
};
+ /* TODO: Remove this once PMIC is implemented */
+ reg_dummy: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "dummy_reg";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -113,3 +119,13 @@ key_volup: key-volup-pins {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
+
+&usbdrd {
+ status = "okay";
+ vdd10-supply = <®_dummy>;
+ vdd33-supply = <®_dummy>;
+};
+
+&usbdrd_phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-r8s.dts b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
index 6bae3c0..55342db 100644
--- a/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
+++ b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
@@ -44,6 +44,12 @@ memory@80000000 {
<0x8 0x80000000 0x0 0xc0000000>;
};
+ /* TODO: Remove this once PMIC is implemented */
+ reg_dummy: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "dummy_reg";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -113,3 +119,13 @@ key_volup: key-volup-pins {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
+
+&usbdrd {
+ status = "okay";
+ vdd10-supply = <®_dummy>;
+ vdd33-supply = <®_dummy>;
+};
+
+&usbdrd_phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
index 55fa8e9..7b97220 100644
--- a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
@@ -27,6 +27,12 @@ framebuffer0: framebuffer@f1000000 {
};
};
+ /* TODO: Remove this once PMIC is implemented */
+ reg_dummy: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "dummy_reg";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -96,3 +102,13 @@ key_volup: key-volup-pins {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
+
+&usbdrd {
+ status = "okay";
+ vdd10-supply = <®_dummy>;
+ vdd33-supply = <®_dummy>;
+};
+
+&usbdrd_phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
index dd7f99f..7179109 100644
--- a/arch/arm64/boot/dts/exynos/exynos990.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -211,6 +211,30 @@ timer@10040000 {
<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
};
+ watchdog_cl0: watchdog@10050000 {
+ compatible = "samsung,exynos990-wdt";
+ reg = <0x10050000 0x100>;
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER0_PCLK>,
+ <&oscclk>;
+ clock-names = "watchdog",
+ "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <0>;
+ };
+
+ watchdog_cl2: watchdog@10060000 {
+ compatible = "samsung,exynos990-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER2_PCLK>,
+ <&oscclk>;
+ clock-names = "watchdog",
+ "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <2>;
+ };
+
gic: interrupt-controller@10101000 {
compatible = "arm,gic-400";
reg = <0x10101000 0x1000>,
@@ -225,12 +249,34 @@ gic: interrupt-controller@10101000 {
#size-cells = <1>;
};
+ cmu_peric0: clock-controller@10400000 {
+ compatible = "samsung,exynos990-cmu-peric0";
+ reg = <0x10400000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>,
+ <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+ <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+ clock-names = "oscclk", "bus", "ip";
+ };
+
pinctrl_peric0: pinctrl@10430000 {
compatible = "samsung,exynos990-pinctrl";
reg = <0x10430000 0x1000>;
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmu_peric1: clock-controller@10700000 {
+ compatible = "samsung,exynos990-cmu-peric1";
+ reg = <0x10700000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>,
+ <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+ <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+ clock-names = "oscclk", "bus", "ip";
+ };
+
pinctrl_peric1: pinctrl@10730000 {
compatible = "samsung,exynos990-pinctrl";
reg = <0x10730000 0x1000>;
@@ -254,6 +300,37 @@ cmu_hsi0: clock-controller@10a00000 {
"dpgtc";
};
+ usbdrd_phy: phy@10c00000 {
+ compatible = "samsung,exynos990-usbdrd-phy";
+ reg = <0x10c00000 0x100>;
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+ <&oscclk>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ usbdrd: usb@10e00000 {
+ compatible = "samsung,exynos990-dwusb3",
+ "samsung,exynos850-dwusb3";
+ ranges = <0x0 0x10e00000 0x10000>;
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_USB31DRD_REF_CLK_40>;
+ clock-names = "bus_early", "ref";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ usbdrd_dwc3: usb@0 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbdrd_phy 0>;
+ phy-names = "usb2-phy";
+ };
+ };
+
pinctrl_hsi1: pinctrl@13040000 {
compatible = "samsung,exynos990-pinctrl";
reg = <0x13040000 0x1000>;
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index c0f8c25..31c9952 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -341,6 +341,7 @@ watchdog_cl1: watchdog@10070000 {
gic: interrupt-controller@10400000 {
compatible = "arm,gic-v3";
+ #address-cells = <0>;
#interrupt-cells = <4>;
interrupt-controller;
reg = <0x10400000 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 23535ed..525ef18 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -5,6 +5,8 @@
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
@@ -194,6 +196,7 @@
dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios-lvds.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-proton2s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-cubox-m.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
@@ -201,7 +204,12 @@
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-edm-g-wb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-mate.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
@@ -237,6 +245,7 @@
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-ultra-mach-sbc.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
@@ -332,7 +341,10 @@
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
@@ -371,8 +383,10 @@
dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb
imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+imx8mm-kontron-bl-lte-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-bl-lte.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-lte.dtb
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
new file mode 100644
index 0000000..07026b0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a-tqmls1012al-mbls1012al.dts"
+
+&esdhc0 {
+ vqmmc-supply = <®_1v8>;
+ /delete-property/ no-mmc;
+ /delete-property/ sd-uhs-sdr12;
+ /delete-property/ sd-uhs-sdr25;
+ /delete-property/ sd-uhs-sdr50;
+ /delete-property/ sd-uhs-sdr104;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ no-sd;
+ voltage-ranges = <1800 1800>;
+ non-removable;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
new file mode 100644
index 0000000..e46cc1a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "fsl-ls1012a-tqmls1012al.dtsi"
+
+/ {
+ model = "TQ-Systems TQMLS1012AL on MBLS1012AL";
+ compatible = "tq,ls1012a-tqmls1012al-mbls1012al", "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+ chassis-type = "embedded";
+
+ aliases {
+ /* use MAC from U-Boot environment */
+ /* TODO: PFE */
+ ethernet2 = &swport0;
+ ethernet3 = &swport1;
+ ethernet4 = &swport2;
+ ethernet5 = &swport3;
+ serial0 = &duart0;
+ spi0 = &qspi;
+ };
+
+ chosen {
+ stdout-path = &duart0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ switch-1 {
+ label = "S2";
+ linux,code = <BTN_0>;
+ gpios = <&gpio_exp_3p3v 13 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-2 {
+ label = "X15";
+ linux,code = <BTN_1>;
+ gpios = <&gpio_exp_1p8v 5 GPIO_ACTIVE_LOW>;
+ };
+
+ switch-3 {
+ label = "X16";
+ linux,code = <BTN_2>;
+ gpios = <&gpio_exp_1p8v 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio_exp_3p3v 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_exp_3p3v 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* 64 MiB */
+ size = <0 0x04000000>;
+ /* 512 - 128 MiB, our minimum RAM config will be 512 MiB */
+ alloc-ranges = <0 0x80000000 0 0x98000000>;
+ linux,cma-default;
+ };
+ };
+
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ reg_1p5v_pcie: regulator-1p5v-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V5_PCIE";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio_exp_1p8v 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_1v5>;
+ };
+
+ reg_1p5v_wlan: regulator-1p5v-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V5_WLAN";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio_exp_1p8v 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_1v5>;
+ };
+
+ reg_1v8: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3v3: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_3v3_pcie: regulator-3v3-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_PCIE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio_exp_3p3v 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_3v3>;
+ };
+
+ reg_3v3_wlan: regulator-3v3-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_WLAN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio_exp_3p3v 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_3v3>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&esdhc0 {
+ vmmc-supply = <®_3v3>;
+ no-mmc;
+ no-sdio;
+ disable-wp;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&i2c0 {
+ gpio_exp_3p3v: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-line-names = "", "", "GPIO_3V3_3", "",
+ "", "", "", "",
+ "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+ "", "", "", "";
+
+ wlan-disable-hog {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "WLAN_DISABLE#";
+ };
+
+ pcie-rst-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE_RST#";
+ };
+
+ wlan-rst-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "WLAN_RST#";
+ };
+
+ pcie-dis-hog {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE_DIS#";
+ };
+
+ pcie-wake-hog {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "PCIE_WAKE#";
+ };
+ };
+
+ lm75_48: temperature-sensor@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ vs-supply = <®_3v3>;
+ };
+
+ switch@5f {
+ compatible = "microchip,ksz9897";
+ reg = <0x5f>;
+ reset-gpios = <&gpio_exp_3p3v 7 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swport0: port@0 {
+ reg = <0>;
+ label = "swp0";
+ phy-mode = "internal";
+ };
+
+ swport1: port@1 {
+ reg = <1>;
+ label = "swp1";
+ phy-mode = "internal";
+ };
+
+ swport2: port@2 {
+ reg = <2>;
+ label = "swp2";
+ phy-mode = "internal";
+ };
+
+ swport3: port@3 {
+ reg = <3>;
+ label = "swp3";
+ phy-mode = "internal";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ /* TODO: PFE */
+ phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <1500>;
+ tx-internal-delay-ps = <1500>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ gpio_exp_1p8v: gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_1v8>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-line-names = "PCIE_CLK_PD#", "PMIC_INT#", "ETH_SW_INT#", "",
+ "", "", "", "",
+ "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+ "", "", "", "";
+
+ /* do not change PCIE_CLK_PD */
+ pcie-clk-pd-hog {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCIE_CLK_PD#";
+ };
+
+ pmic-int-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "PMIC_INT#";
+ };
+
+ eth-sw-int-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "ETH_SW_INT#";
+ };
+
+ eth-link-pwrdwn-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "ETH_LINK_PWRDWN#";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+/* TODO: PFE */
+
+&sata {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_2_0: hub@1 {
+ compatible = "usb451,8142";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+ vdd-supply = <®_vcc_3v3>;
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb451,8140";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+ vdd-supply = <®_vcc_3v3>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
new file mode 100644
index 0000000..7c5a3de
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ compatible = "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+
+ memory@80000000 {
+ device_type = "memory";
+ /* our minimum RAM config will be 512 MiB */
+ reg = <0x00000000 0x80000000 0 0x20000000>;
+ };
+
+ reg_vcc_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vcc_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ jc42_19: temperature-sensor@19 {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x19>;
+ };
+
+ m24c64_50: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ vcc-supply = <®_vcc_3v3>;
+ };
+
+ m24c02_51: eeprom@51 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ read-only;
+ vcc-supply = <®_vcc_3v3>;
+ };
+
+ rtc1: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&qspi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <39000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ vcc-supply = <®_vcc_1v8>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index dd47988..fc3e138 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -87,6 +87,7 @@ pmu {
gic: interrupt-controller@1400000 {
compatible = "arm,gic-400";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1401000 0 0x1000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 26bea88..73315c5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -289,6 +289,7 @@ pmu {
gic: interrupt-controller@1400000 {
compatible = "arm,gic-400";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1401000 0 0x1000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 4a22fde..770d91e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -260,6 +260,7 @@ pmu {
gic: interrupt-controller@1400000 {
compatible = "arm,gic-400";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1410000 0 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index e4b7270..eec2cd6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -41,6 +41,7 @@ &emdio1 {
rgmii_phy1: ethernet-phy@1 {
reg = <1>;
qca,smarteee-tw-us-1g = <24>;
+ interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
};
};
@@ -156,6 +157,7 @@ &i2c4 {
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
+ interrupts-extended = <&gpio2 8 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index a7dcbec..af6258b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -96,6 +96,14 @@ &esdhc0 {
status = "okay";
};
+&pcie3 {
+ status = "okay";
+};
+
+&pcie5 {
+ status = "okay";
+};
+
&pcs_mdio7 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index 6f27a9c..86d018f 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -256,7 +256,7 @@ touchscreen: touchscreen {
};
&asrc0 {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
};
&adc0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
index 9b8b138..469de8b 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -68,10 +68,10 @@ pcieb: pcie@5f010000 {
clock-names = "dbi", "mstr", "slv";
bus-range = <0x00 0xff>;
device_type = "pci";
- interrupt-map = <0 0 0 1 &gic 0 105 4>,
- <0 0 0 2 &gic 0 106 4>,
- <0 0 0 3 &gic 0 107 4>,
- <0 0 0 4 &gic 0 108 4>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 0x7>;
num-lanes = <1>;
num-viewport = <4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index b6d64d3..25a77ca 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -652,7 +652,7 @@ &pcie0 {
status = "okay";
};
-&pcie0_ep{
+&pcie0_ep {
phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
phy-names = "pcie-phy";
pinctrl-0 = <&pinctrl_pcieb>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index 9b114be..a66ba6d 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -5,6 +5,8 @@
/delete-node/ &enet1_lpcg;
/delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
/ {
conn_enet0_root_clk: clock-conn-enet0-root {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
index bbc6abb..ec466e4 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
@@ -42,10 +42,10 @@ pcie0: pcie@5f010000 {
#interrupt-cells = <1>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
- interrupt-map = <0 0 0 1 &gic 0 47 4>,
- <0 0 0 2 &gic 0 48 4>,
- <0 0 0 3 &gic 0 49 4>,
- <0 0 0 4 &gic 0 50 4>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 0x7>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index a71d8b3..8d60827 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -92,6 +92,7 @@ gic: interrupt-controller@51a00000 {
compatible = "arm,gic-v3";
reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
<0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
index 90e638b..87fe3eb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
@@ -333,7 +333,7 @@ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
>;
};
- pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp{
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 622caaa..ff7ca20 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -147,6 +147,7 @@ sound-wm8524 {
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&cpudai>;
simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Line", "Left Line Out Jack",
"Line", "Right Line Out Jack";
@@ -158,11 +159,11 @@ cpudai: simple-audio-card,cpu {
sound-dai = <&sai3>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
+ system-clock-direction-out;
};
simple-audio-card,codec {
sound-dai = <&wm8524>;
- clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
};
};
@@ -570,9 +571,17 @@ &sai2 {
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
- assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
- assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
- assigned-clock-rates = <24576000>;
+ assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>,
+ <&clk IMX8MM_AUDIO_PLL2>,
+ <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <0>, <0>, <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <393216000>, <361267200>, <24576000>;
+ fsl,sai-mclk-direction-output;
+ clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+ <&clk IMX8MM_AUDIO_PLL2_OUT>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
new file mode 100644
index 0000000..324004b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2025 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+ compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ key-user {
+ label = "user";
+ linux,code = <BTN_0>;
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led_lte>;
+
+ lte-led1-b {
+ label = "lte-led1-blue";
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ lte-led1-g {
+ label = "lte-led1-green";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ lte-led1-r {
+ label = "lte-led1-red";
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ lte-led2-b {
+ label = "lte-led2-blue";
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ lte-led2-g {
+ label = "lte-led2-green";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ lte-led2-r {
+ label = "lte-led2-red";
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ecspi3 {
+ status = "disabled";
+};
+
+&i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ tpm@2e {
+ compatible = "infineon,slb9673", "tcg,tpm-tis-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm>;
+ reg = <0x2e>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3>;
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "VDD_IO_REF", "TPM_PIRQ#",
+ "TPM_RESET# ", "", "", "",
+ "", "LTE_LED1_B", "LTE_LED1_G", "",
+ "";
+
+ vdd-io-ref-hog {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ line-name = "VDD_IO_REF";
+ output-high;
+ };
+
+ tpm-reset-hog {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_LOW>;
+ line-name = "TPM_RESET#";
+ output-low;
+ };
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+ gpio-line-names = "", "", "LTE_RESET", "",
+ "", "", "", "",
+ "", "", "", "LTE_PWRKEY",
+ "", "", "", "",
+ "", "", "", "",
+ "LTE_PWR_EN";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "LTE_LED2_G", "LTE_LED1_R",
+ "LTE_LED2_R", "LTE_LED2_B";
+};
+
+&iomuxc {
+ pinctrl_gpio3: gpio3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* VDD_IO_REF */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x19 /* LTE_RESET */
+ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x19 /* LTE_PWRKEY */
+ MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x19 /* LTE_PWR_EN */
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x19 /* Pushbutton */
+ >;
+ };
+
+ pinctrl_gpio_led_lte: gpioledltegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* LTE_LED1_B */
+ MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* LTE_LED1_G */
+ MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x19 /* LTE_LED1_R */
+ MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 /* LTE_LED2_B */
+ MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x19 /* LTE_LED2_G */
+ MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24 0x19 /* LTE_LED2_R */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083 /* I2C_A_SCL */
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083 /* I2C_A_SDA */
+ >;
+ };
+
+ pinctrl_tpm: tpmgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* TPM_PIRQ# */
+ MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12 0x39 /* TPM_RESET# */
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 33f8d7d..3a166cf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -48,14 +48,6 @@ pwm-beeper {
pwms = <&pwm2 0 5000 0>;
};
- reg_rst_eth2: regulator-rst-eth2 {
- compatible = "regulator-fixed";
- gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- regulator-name = "rst-usb-eth2";
- };
-
reg_vdd_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index d16490d8..e756fe5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -268,8 +268,16 @@ &uart1 {
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ /*
+ * During bootup the CTS needs to stay LOW, which is only possible if this
+ * pin is controlled by a GPIO. The UART IP always sets CTS to HIGH if not
+ * running. So using 'uart-has-rtscts' is not a good choice here! There are
+ * workarounds for this, but they introduce unnecessary complexity and are
+ * therefore avoided here. For more information about this see:
+ * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=79d0224f6bf296d04cd843cfc49921b19c97bb09
+ */
+ rts-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
linux,rs485-enabled-at-boot-time;
- uart-has-rtscts;
status = "okay";
};
@@ -439,7 +447,7 @@ pinctrl_uart2: uart2grp {
MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0
MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0
MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0
- MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0
+ MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
index 1db2773..57d0739 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
@@ -107,7 +107,7 @@ &i2c2 {
#size-cells = <0>;
status = "okay";
- touchscreen@5d {
+ gt911: touchscreen@5d {
compatible = "goodix,gt928";
reg = <0x5d>;
pinctrl-names = "default";
@@ -117,6 +117,17 @@ touchscreen@5d {
reset-gpios = <&gpio3 23 0>;
irq-gpios = <&gpio3 22 0>;
};
+
+ st1633: touchscreen@55 {
+ compatible = "sitronix,st1633";
+ reg = <0x55>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupts = <22 8>;
+ interrupt-parent = <&gpio3>;
+ gpios = <&gpio3 22 0>;
+ status = "disabled";
+ };
};
&lvds {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index d455429..9698791 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -30,29 +30,6 @@ chosen {
stdout-path = &uart3;
};
- reg_vdd_carrier: regulator-vdd-carrier {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
- gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "VDD_CARRIER";
-
- regulator-state-standby {
- regulator-on-in-suspend;
- };
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
-
- regulator-state-disk {
- regulator-off-in-suspend;
- };
- };
-
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -61,7 +38,7 @@ reg_usb1_vbus: regulator-usb1-vbus {
gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- regulator-name = "VBUS_USB1";
+ regulator-name = "VBUS_USB_A";
};
reg_usb2_vbus: regulator-usb2-vbus {
@@ -72,7 +49,7 @@ reg_usb2_vbus: regulator-usb2-vbus {
gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- regulator-name = "VBUS_USB2";
+ regulator-name = "VBUS_USB_B";
};
reg_usdhc2_vcc: regulator-usdhc2-vcc {
@@ -96,6 +73,29 @@ reg_usdhc3_vcc: regulator-usdhc3-vcc {
regulator-max-microvolt = <3300000>;
regulator-name = "VCC_SDIO_B";
};
+
+ reg_vdd_carrier: regulator-vdd-carrier {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+ gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "VDD_CARRIER";
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
};
&A53_0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
index e5ca5a6..79e4c37 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
@@ -20,7 +20,7 @@ backlight: backlight {
pwms = <&pwm4 0 50000 0>;
power-supply = <®_vdd_3v3_s>;
enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- brightness-levels= <0 4 8 16 32 64 128 255>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
};
panel {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 672baba..921a7f5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -340,10 +340,10 @@ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x16
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x16
- MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x16
- MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x16
- MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x16
- MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x16
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x12
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x12
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x12
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x12
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x10
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index ded89b04..fc3cd63 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1467,6 +1467,7 @@ gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
<0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 33d73f3..145355f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -387,6 +387,11 @@ &sai3 {
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
fsl,sai-mclk-direction-output;
+ clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+ <&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+ <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+ <&clk IMX8MN_AUDIO_PLL2_OUT>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
index 2a736db..58e36de 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
@@ -36,7 +36,7 @@ &eqos {
max-speed = <100>;
};
-&ecspi1{
+&ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
index 231e480a..f654d86 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
@@ -167,7 +167,7 @@ &clk {
<&clk IMX8MP_VIDEO_PLL1>;
};
-&ecspi1{
+&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs2>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW &gpio1 6 GPIO_ACTIVE_LOW>;
@@ -565,7 +565,7 @@ &mipi_dsi {
status = "disabled";
};
-&pcie{
+&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio4 20 GPIO_ACTIVE_LOW>;
@@ -574,7 +574,7 @@ &pcie{
status = "okay";
};
-&pcie_phy{
+&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
clocks = <&pcie0_refclk>;
clock-names = "ref";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
new file mode 100644
index 0000000..8290f18
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mp-sr-som.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP CuBox-M";
+ compatible = "solidrun,imx8mp-cubox-m",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ rtc0 = &carrier_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins>;
+ linux,autosuspend-period = <125>;
+ wakeup-source;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ status {
+ label = "status";
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+ };
+
+ sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ model = "audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ };
+
+ vbus: regulator-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus";
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vmmc: regulator-mmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc_pins>;
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <250>;
+ };
+};
+
+&aud2htx {
+ status = "okay";
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&i2c3 {
+ carrier_rtc: rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ hdmi_pins: pinctrl-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+
+ ir_pins: pinctrl-ir-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x4f
+ >;
+ };
+
+ led_pins: pinctrl-led-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x0
+ >;
+ };
+
+ usdhc2_pins: pinctrl-usdhc2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ vbus_pins: pinctrl-vbus-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x100
+ >;
+ };
+
+ vmmc_pins: pinctrl-vmmc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x0
+ >;
+ };
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+ vbus-supply = <&vbus>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+ vbus-supply = <&vbus>;
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&usdhc2_pins>;
+ pinctrl-1 = <&usdhc2_100mhz_pins>;
+ pinctrl-2 = <&usdhc2_200mhz_pins>;
+ vmmc-supply = <&vmmc>;
+ bus-width = <4>;
+ cap-power-off-card;
+ full-pwr-cycle;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
new file mode 100644
index 0000000..138f21e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-edm-g.dtsi"
+
+/ {
+ compatible = "technexion,edm-g-imx8mp-wb", "technexion,edm-g-imx8mp", "fsl,imx8mp";
+ model = "TechNexion EDM-G-IMX8MP SOM on WB-EDM-G";
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hs_ep: endpoint {
+ remote-endpoint = <&usb3_hs_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ss_ep: endpoint {
+ remote-endpoint = <&hd3ss3220_in_ep>;
+ };
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "HDMI OUT";
+ type = "a";
+
+ port {
+ hdmi_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ default-state = "on";
+ gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+ label = "gpio-led";
+ };
+ };
+
+ pcie0_refclk: clock-pcie-ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ reg_pwr_3v3: regulator-pwr-3v3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "pwr-3v3";
+ };
+
+ reg_pwr_5v: regulator-pwr-5v {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "pwr-5v";
+ };
+
+ sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ model = "audio-hdmi";
+ };
+
+ sound-wm8960 {
+ compatible = "fsl,imx-audio-wm8960";
+ audio-asrc = <&easrc>;
+ audio-codec = <&wm8960>;
+ audio-cpu = <&sai3>;
+ audio-routing = "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+ model = "wm8960-audio";
+ };
+};
+
+&aud2htx {
+ status = "okay";
+};
+
+&easrc {
+ fsl,asrc-rate = <48000>;
+ status = "okay";
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "", "", "", "", "", "DSI_RST", "",
+ "", "", "", "", "", "PCIE_CLKREQ_N", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ pinctrl-0 = <&pinctrl_gpio1>;
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "GPIO_P249", "GPIO_P251",
+ "", "GPIO_P255", "", "", "", "", "", "",
+ "DSI_BL_EN", "DSI_VDDEN", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ pinctrl-0 = <&pinctrl_gpio4>;
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-0 = <&pinctrl_hdmi>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ wm8960: audio-codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ AVDD-supply = <®_pwr_3v3>;
+ DBVDD-supply = <®_pwr_3v3>;
+ DCVDD-supply = <®_pwr_3v3>;
+ SPKVDD1-supply = <®_pwr_5v>;
+ SPKVDD2-supply = <®_pwr_5v>;
+ wlf,gpio-cfg = <1 2>;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,shared-lrclk;
+ };
+
+ expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names = "EXPOSURE_TRIG_IN1", "FLASH_OUT1",
+ "INFO_TRIG_IN1", "CAM_SHUTTER1", "XVS1",
+ "PWR1_TIME0", "PWR1_TIME1", "PWR1_TIME2",
+ "EXPOSURE_TRIG_IN2", "FLASH_OUT2",
+ "INFO_TRIG_IN2", "CAM_SHUTTER2", "XVS2",
+ "PWR2_TIME0", "PWR2_TIME1", "PWR2_TIME2";
+ };
+
+ expander2: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio4>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names = "M2_DISABLE_N", "LED_EN", "", "",
+ "", "", "", "USB_OTG_OC",
+ "EXT_GPIO8", "EXT_GPIO9", "", "",
+ "", "CSI1_PDB", "CSI2_PDB", "PD_FAULT";
+ pinctrl-0 = <&pinctrl_expander2_irq>;
+ pinctrl-names = "default";
+ };
+
+ usb_typec: usb-typec@67 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x67>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pinctrl_hd3ss3220_irq>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hd3ss3220_in_ep: endpoint {
+ remote-endpoint = <&ss_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hd3ss3220_out_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+};
+
+&i2c_0 {
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie_phy {
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ /* dual role is implemented but not a full featured OTG */
+ adp-disable;
+ dr_mode = "otg";
+ hnp-disable;
+ role-switch-default-mode = "peripheral";
+ srp-disable;
+ usb-role-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb3_hs_ep: endpoint {
+ remote-endpoint = <&hs_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_out_ep>;
+ };
+ };
+ };
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+};
+
+&iomuxc {
+ pinctrl_expander2_irq: expander2-irqgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x140 /* GPIO_P247 */
+ >;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x16 /* DSI_RST */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06 0x16 /* GPIO_P249 */
+ MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07 0x16 /* GPIO_P251 */
+ MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 0x16 /* GPIO_P255 */
+ MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16 0x16 /* DSI_BL_EN */
+ MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17 0x16 /* DSI_VDDEN */
+ >;
+ };
+
+ pinctrl_hd3ss3220_irq: hd3ss3220-irqgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x41 /* GPIO_P253 */
+ >;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c2
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c2
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x10
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
new file mode 100644
index 0000000..3f1e083
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ i2c_0: i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c_brd_conf>;
+ pinctrl-names = "default";
+ scl-gpios = <&gpio4 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ eeprom: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+ };
+
+ memory@40000000 {
+ reg = <0x0 0x40000000 0 0xc0000000>,
+ <0x1 0x00000000 0 0xc0000000>;
+ device_type = "memory";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <12000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ startup-delay-us = <100>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ rfkill {
+ compatible = "rfkill-gpio";
+ name = "rfkill";
+ pinctrl-0 = <&pinctrl_bt_ctrl>;
+ pinctrl-names = "default";
+ radio-type = "bluetooth";
+ shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wl_reg_on: regulator-wl-reg-on {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <20000>;
+ pinctrl-0 = <&pinctrl_wifi_ctrl>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "WL_REG_ON";
+ startup-delay-us = <100>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_arm>;
+};
+
+&ecspi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ num-cs = <1>;
+ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+ pinctrl-names = "default";
+};
+
+&eqos {
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-names = "default";
+ snps,force_thresh_dma_mode;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ eee-broken-1000t;
+ reset-assert-us = <35000>;
+ reset-deassert-us = <75000>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ realtek,clkout-disable;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <5>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0>;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <1>;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <2>;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <3>;
+ snps,priority = <0x8>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <4>;
+ snps,priority = <0xf0>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <5>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ pinctrl-names = "default";
+};
+
+&flexcan2 {
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-names = "default";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pmic: pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+
+ regulators {
+ BUCK1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <720000>;
+ regulator-name = "BUCK1";
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_arm: BUCK2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1025000>;
+ regulator-min-microvolt = <720000>;
+ regulator-name = "BUCK2";
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ BUCK4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3600000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "BUCK4";
+ };
+
+ reg_buck5: BUCK5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1950000>;
+ regulator-min-microvolt = <1650000>;
+ regulator-name = "BUCK5";
+ };
+
+ BUCK6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1155000>;
+ regulator-min-microvolt = <1045000>;
+ regulator-name = "BUCK6";
+ };
+
+ LDO1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1950000>;
+ regulator-min-microvolt = <1650000>;
+ regulator-name = "LDO1";
+ };
+
+ LDO3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1890000>;
+ regulator-min-microvolt = <1710000>;
+ regulator-name = "LDO3";
+ };
+
+ LDO5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "LDO5";
+ };
+ };
+ };
+};
+
+&i2c2 {
+ /* I2C_B on EDMG */
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-names = "default";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-names = "default";
+};
+
+&i2c4 {
+ /* I2C_A on EDMG */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-names = "default";
+};
+
+&i2c5 {
+ /* I2C_C on EDMG */
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_i2c5>;
+ pinctrl-names = "default";
+};
+
+&pcie {
+ pinctrl-0 = <&pinctrl_pcie>;
+ pinctrl-names = "default";
+ reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+ pinctrl-0 = <&pinctrl_pwm1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-0 = <&pinctrl_pwm2>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-0 = <&pinctrl_pwm3>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-0 = <&pinctrl_pwm4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sai2 {
+ /* AUD_B on EDMG */
+ assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+ assigned-clock-rates = <12288000>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ pinctrl-0 = <&pinctrl_sai2>;
+ pinctrl-names = "default";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&sai3 {
+ /* AUD_A on EDMG */
+ assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+ assigned-clock-rates = <12288000>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ pinctrl-0 = <&pinctrl_sai3>;
+ pinctrl-names = "default";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&uart1 {
+ /* BT */
+ assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ /* UART_A on EDMG, console */
+ pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart3 {
+ /* UART_C on EDMG */
+ assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ /* UART_B on EDMG */
+ assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ pinctrl-0 = <&pinctrl_uart4>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usdhc1 {
+ /* WIFI SDIO */
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC1>;
+ assigned-clock-rates = <200000000>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ vmmc-supply = <&wl_reg_on>;
+ status = "okay";
+};
+
+&usdhc2 {
+ /* SD card on baseboard */
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&usdhc3 {
+ /* eMMC on SOM */
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-0 = <&pinctrl_wdog>;
+ pinctrl-names = "default";
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog>;
+ pinctrl-names = "default";
+
+ pinctrl_bt_ctrl: bt-ctrlgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x41 /* BT_REG_ON */
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x41 /* BT_WAKE_HOST */
+ >;
+ };
+
+ pinctrl_ecspi1_cs: ecspi1csgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40000
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82
+ >;
+ };
+
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x23
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x19
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x19
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154
+ MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
+ MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001a3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001a3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001a3
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001a3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c5: i2c5grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001a3
+ MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001a3
+ >;
+ };
+
+ pinctrl_i2c_brd_conf: i2cbrdconfgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1c3 /* BRD_CONF_SCL, bitbang */
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1c3 /* BRD_CONF_SDA, bitbang */
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x41 /* PCIE CLKREQ */
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x41 /* PCIE WAKE */
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x41 /* PCIE RST */
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x116
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT 0x116
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT 0x116
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6
+ MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
+ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
+ MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x140
+ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
+ MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS 0x140
+ MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140
+ MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140
+ MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x140
+ MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS 0x140
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX 0x140
+ MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX 0x140
+ MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS 0x140
+ MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+
+ pinctrl_wifi_ctrl: wifi-ctrlgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x41 /* WL_REG_ON */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x41 /* WL_WAKE_HOST */
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index c0cc561..3730792 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -309,7 +309,7 @@ &dsp {
};
&easrc {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
new file mode 100644
index 0000000..00614f5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Mate";
+ compatible = "solidrun,imx8mp-hummingboard-mate",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
new file mode 100644
index 0000000..36cd452
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Pro";
+ compatible = "solidrun,imx8mp-hummingboard-pro",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+ <&m2_wwan_wake_pins>;
+};
+
+&pcie {
+ pinctrl-0 = <&m2_reset_pins>;
+ pinctrl-names = "default";
+ reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ status = "okay";
+};
+
+&phy0 {
+ leds {
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /delete-node/ led@1;
+ };
+};
+
+&phy1 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
new file mode 100644
index 0000000..77402a3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ sound-wm8904 {
+ compatible = "fsl,imx-audio-wm8904";
+ model = "audio-wm8904";
+ audio-cpu = <&sai3>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "AMIC", "MICBIAS",
+ "IN2R", "AMIC";
+ };
+};
+
+&i2c2 {
+ codec: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+ clock-names = "mclk";
+ AVDD-supply = <&v_1_8>;
+ CPVDD-supply = <&v_1_8>;
+ DBVDD-supply = <&v_3_3>;
+ DCVDD-supply = <&v_1_8>;
+ MICVDD-supply = <&v_3_3>;
+ };
+};
+
+&iomuxc {
+ sai3_pins: pinctrl-sai3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
+ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6
+ >;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sai3_pins>;
+ assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
+ <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
+ <&clk IMX8MP_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
new file mode 100644
index 0000000..825ad6a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ rtc0 = &carrier_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led-0 {
+ label = "D30";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-1 {
+ label = "D31";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-2 {
+ label = "D32";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-3 {
+ label = "D33";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-4 {
+ label = "D34";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ rfkill-mpcie-wifi {
+ /*
+ * The mpcie connector only has USB,
+ * therefore this rfkill is for cellular radios only.
+ */
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpcie_rfkill_pins>;
+ label = "mpcie radio";
+ radio-type = "wwan";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ vmmc: regulator-mmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc_pins>;
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <250>;
+ };
+
+ vbus1: regulator-vbus-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus1";
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus1_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vbus2: regulator-vbus-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus2";
+ gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus2_pins>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ v_1_2: regulator-1-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vmpcie {
+ /* supplies mpcie and m2 connectors */
+ compatible = "regulator-fixed";
+ regulator-name = "vmpcie";
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmpcie_pins>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+/* mikrobus spi */
+&ecspi2 {
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_spi_pins>;
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-0 = <&mpcie_reset_pins>;
+ pinctrl-names = "default";
+
+ mpcie-reset-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "mpcie-reset";
+ };
+};
+
+&i2c3 {
+ carrier_eeprom: eeprom@57{
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+
+ carrier_rtc: rtc@69 {
+ compatible = "abracon,ab1805";
+ reg = <0x69>;
+ abracon,tc-diode = "schottky";
+ abracon,tc-resistor = <3>;
+ };
+};
+
+&iomuxc {
+ csi_pins: pinctrl-csi-grp {
+ fsl,pins = <
+ /* Pin 24: STROBE */
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x0
+ >;
+ };
+
+ led_pins: pinctrl-led-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0
+ MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x0
+ MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0
+ MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x0
+ >;
+ };
+
+ mikro_int_pins: pinctrl-mikro-int-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x0
+ >;
+ };
+
+ mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x0
+ >;
+ };
+
+ mikro_rst_pins: pinctrl-mikro-rst-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x0
+ >;
+ };
+
+ mikro_spi_pins: pinctrl-mikro-spi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x40000
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82
+ >;
+ };
+
+ mikro_uart_pins: pinctrl-mikro-uart-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x140
+ MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x140
+ >;
+ };
+
+ mpcie_reset_pins: pinctrl-mpcie-reset-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x0
+ >;
+ };
+
+ mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x20
+ >;
+ };
+
+ usb_hub_pins: pinctrl-usb-hub-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x0
+ >;
+ };
+
+ usdhc2_pins: pinctrl-usdhc2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140
+ MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140
+ >;
+ };
+
+ vbus1_pins: pinctrl-vbus-1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x20
+ >;
+ };
+
+ vbus2_pins: pinctrl-vbus-2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x20
+ >;
+ };
+
+ vmmc_pins: pinctrl-vmmc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ >;
+ };
+
+ vmpcie_pins: pinctrl-vmpcie-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x0
+ >;
+ };
+};
+
+&phy0 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* ADIN1300 LED_0 pin */
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_ORANGE>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ /* ADIN1300 LINK_ST pin */
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* mikrobus uart */
+&uart3 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+ vbus-supply = <&vbus2>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <&vbus1>;
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_pins>;
+
+ hub_2_0: hub@1 {
+ compatible = "usb4b4,6502", "usb4b4,6506";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&v_1_2>;
+ vdd2-supply = <&v_3_3>;
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb4b4,6500", "usb4b4,6504";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&v_1_2>;
+ vdd2-supply = <&v_3_3>;
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&usdhc2_pins>;
+ pinctrl-1 = <&usdhc2_100mhz_pins>;
+ pinctrl-2 = <&usdhc2_200mhz_pins>;
+ vmmc-supply = <&vmmc>;
+ bus-width = <4>;
+ cap-power-off-card;
+ full-pwr-cycle;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
new file mode 100644
index 0000000..d7a999c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ sound-hdmi {
+ compatible = "fsl,imx-audio-hdmi";
+ model = "audio-hdmi";
+ audio-cpu = <&aud2htx>;
+ hdmi-out;
+ };
+};
+
+&aud2htx {
+ status = "okay";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&iomuxc {
+ hdmi_pins: pinctrl-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+};
+
+&lcdif3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
new file mode 100644
index 0000000..8d8d8d2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ rfkill-m2-gnss {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m2_gnss_rfkill_pins>;
+ label = "m.2 GNSS";
+ radio-type = "gps";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* M.2 is B-keyed, so w-disable is for WWAN */
+ rfkill-m2-wwan {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&m2_wwan_rfkill_pins>;
+ label = "m.2 WWAN";
+ radio-type = "wwan";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&iomuxc {
+ m2_gnss_rfkill_pins: pinctrl-m2-gnss-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x20
+ >;
+ };
+
+ m2_reset_pins: pinctrl-m2-reset-grp {
+ fsl,pins = <
+ /*
+ * 3.3V domain on SoC, set open-drain to ensure
+ * 1.8V logic on connector
+ */
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x20
+ >;
+ };
+
+ m2_wwan_rfkill_pins: pinctrl-m2-wwan-rfkill-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x20
+ >;
+ };
+
+ m2_wwan_wake_pins: pinctrl-m2-wwan-wake-grp {
+ fsl,pins = <
+ /* weak i/o, open drain */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x20
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
new file mode 100644
index 0000000..46916dd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "c";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&adv7535_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ hdmi@3d {
+ compatible = "adi,adv7535";
+ reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+ reg-names = "main", "edid", "cec", "packet";
+ adi,dsi-lanes = <4>;
+ avdd-supply = <&v_1_8>;
+ dvdd-supply = <&v_1_8>;
+ pvdd-supply = <&v_1_8>;
+ a2vdd-supply = <&v_1_8>;
+ v3p3-supply = <&v_3_3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mini_hdmi_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7535_from_dsim: endpoint {
+ remote-endpoint = <&dsim_to_adv7535>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ adv7535_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&iomuxc {
+ mini_hdmi_pins: pinctrl-mini-hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x0
+ >;
+ };
+};
+
+&lcdif1 {
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,esc-clock-frequency = <10000000>;
+ status = "okay";
+
+ port@1 {
+ dsim_to_adv7535: endpoint {
+ remote-endpoint = <&adv7535_from_dsim>;
+ attach-bridge;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
new file mode 100644
index 0000000..d32844c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Pulse";
+ compatible = "solidrun,imx8mp-hummingboard-pulse",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &pcie_eth;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&gpio1 {
+ pinctrl-0 = <&mpcie_reset_pins>, <&m2_reset_pins>;
+ pinctrl-names = "default";
+
+ m2-reset-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "m2-reset";
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+ <&m2_wwan_wake_pins>;
+
+ pcie_eth_pins: pinctrl-pcie-eth-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x0
+ >;
+ };
+};
+
+&pcie {
+ pinctrl-0 = <&pcie_eth_pins>;
+ pinctrl-names = "default";
+ reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ root@0,0 {
+ compatible = "pci16c3,abcd";
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* Intel i210 */
+ pcie_eth: ethernet@1,0 {
+ compatible = "pci8086,157b";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
new file mode 100644
index 0000000..4ce5b799
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP HummingBoard Ripple";
+ compatible = "solidrun,imx8mp-hummingboard-ripple",
+ "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ /delete-property/ ethernet1;
+ };
+};
+
+&fec {
+ /* this board does not use second phy / ethernet on SoM */
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
index 0eb9e72..614b4ce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -123,40 +123,54 @@ &gpio2 {
/*
* Rename SoM signals according to board usage:
- * SPI_A_WP -> CAN_ADDR0
- * SPI_A_HOLD -> CAN_ADDR1
- * GPIO_B_0 -> DIO1_OUT
- * GPIO_B_1 -> DIO2_OUT
+ * GPIO_B_0 -> IO_EXP_INT
+ * GPIO_B_1 -> IO_EXP_RST
*/
&gpio3 {
gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
- "SDIO_B_D6", "SDIO_B_D7", "CAN_ADDR0", "CAN_ADDR1",
+ "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
"UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
"SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
- "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "DIO1_OUT",
- "DIO2_OUT", "", "BOOT_SEL0", "BOOT_SEL1",
+ "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "IO_EXP_INT",
+ "IO_EXP_RST", "", "BOOT_SEL0", "BOOT_SEL1",
"", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
"HDMI_CEC", "HDMI_HPD";
};
/*
- * Rename SoM signals according to board usage:
- * GPIO_B_5 -> DIO2_IN
- * GPIO_B_6 -> DIO3_IN
- * GPIO_B_7 -> DIO4_IN
- * GPIO_B_3 -> DIO4_OUT
- * GPIO_B_4 -> DIO1_IN
- * GPIO_B_2 -> DIO3_OUT
+ * Rename SoM signals according to board usage and remove labels for unsed pins:
+ * GPIO_A_6 -> TFT_RESET
+ * GPIO_A_7 -> TFT_STBY
+ * GPIO_B_3 -> CSI_ENABLE
+ * GPIO_B_2 -> USB_HUB_RST
*/
&gpio4 {
- gpio-line-names = "DIO2_IN", "DIO3_IN", "DIO4_IN", "GPIO_C_0",
+ gpio-line-names = "", "", "", "",
"ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
"ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
"ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
- "ETH_A_TX_EN", "ETH_A_TX_CLK", "DIO4_OUT", "DIO1_IN",
- "DIO3_OUT", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+ "ETH_A_TX_EN", "ETH_A_TX_CLK", "CSI_ENABLE", "",
+ "USB_HUB_RST", "TFT_RESET", "CAN_A_TX", "UART_A_CTS",
"UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
- "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+ "TFT_STBY", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ * SPI_A_SDI -> CAN_ADDR0
+ * SPI_A_SDO -> CAN_ADDR1
+ */
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio5>;
+ gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+ "PWM_1", "PWM_0", "SPI_A_SCK", "CAN_ADDR1",
+ "CAN_ADDR0", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+ "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+ "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+ "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+ "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+ "UART_B_RX", "UART_B_TX";
};
&hdmi_pvi {
@@ -236,8 +250,6 @@ &usb_dwc3_0 {
};
&usb_dwc3_1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_hub>;
#address-cells = <1>;
#size-cells = <0>;
dr_mode = "host";
@@ -246,7 +258,7 @@ &usb_dwc3_1 {
usb-hub@1 {
compatible = "usb424,2514";
reg = <1>;
- reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
};
};
@@ -297,9 +309,10 @@ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x46
>;
};
- pinctrl_usb_hub: usbhubgrp {
+ pinctrl_gpio5: gpio5grp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x46
+ MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07 0x46 /* CAN_ADR0 */
+ MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x46 /* CAN_ADR1 */
>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
index baecf76..e602c1c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -83,7 +83,7 @@ adc_ts: adc@0 {
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_touch>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
new file mode 100644
index 0000000..4e6629f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+ model = "SolidRun i.MX8MP SoM";
+ compatible = "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+ chosen {
+ bootargs = "earlycon=ec_imx6q,0x30890000,115200";
+ stdout-path = &uart2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0xc0000000>,
+ <0x1 0x00000000 0 0xc0000000>;
+ };
+
+ usdhc1_pwrseq: usdhc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ v_1_8: regulator-1-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ v_3_3: regulator-3-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+/*
+ * Reserve all physical memory from within the first 1GB of DDR address
+ * space to avoid panic on low memory systems.
+ */
+&dsp_reserved {
+ reg = <0 0x6f000000 0 0x1000000>;
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eqos_pins>, <&phy0_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&phy0>;
+ snps,force_thresh_dma_mode;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <5>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <5>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ snps,map-to-dma-channel = <4>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fec_pins>, <&phy1_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&phy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&i2c1_gpio_pins>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic: pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-0 = <&pmic_pins>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 GPIO_ACTIVE_LOW>;
+ nxp,i2c-lt-enable;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ buck4: BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5{
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ som_eeprom: eeprom@50{
+ compatible = "st,24c01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-1 = <&i2c2_gpio_pins>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-1 = <&i2c3_gpio_pins>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 {
+ /* routed to basler camera connector */
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-1 = <&i2c4_gpio_pins>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&iomuxc {
+ eqos_pins: pinctrl-eqos-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ >;
+ };
+
+ fec_pins: pinctrl-fec-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
+ >;
+ };
+
+ i2c1_pins: pinctrl-i2c1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ >;
+ };
+
+ i2c1_gpio_pins: pinctrl-i2c1-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c3
+ >;
+ };
+
+ i2c2_pins: pinctrl-i2c2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ >;
+ };
+
+ i2c2_gpio_pins: pinctrl-i2c2-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c3
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c3
+ >;
+ };
+
+ i2c3_pins: pinctrl-i2c3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ >;
+ };
+
+ i2c3_gpio_pins: pinctrl-i2c3-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c3
+ >;
+ };
+
+ i2c4_pins: pinctrl-i2c4-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ >;
+ };
+
+ i2c4_gpio_pins: pinctrl-i2c4-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001c3
+ >;
+ };
+
+ phy0_pins: pinctrl-phy0-grp {
+ fsl,pins = <
+ /* RESET_N: weak i/o, open drain, external 1k pull-up */
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x20
+ /* INT_N: weak i/o, open drain, internal pull-up */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x160
+ >;
+ };
+
+ phy1_pins: pinctrl-phy-1-grp {
+ fsl,pins = <
+ /* RESET_N: weak i/o, open drain, external 1k pull-up */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x20
+ /* INT_N: weak i/o, open drain, internal pull-up */
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x160
+ >;
+ };
+
+ pmic_pins: pinctrl-pmic-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
+ >;
+ };
+
+ uart1_pins: pinctrl-uart1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
+ MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x140
+ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140
+ /* BT_REG_ON */
+ MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x0
+ /* BT_WAKE_DEV */
+ MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x0
+ /* BT_WAKE_HOST */
+ MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x100
+ >;
+ };
+
+ uart2_pins: pinctrl-uart2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ >;
+ };
+
+ usdhc1_pins: pinctrl-usdhc1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
+ /* WL_REG_ON */
+ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x0
+ /* WL_WAKE_HOST */
+ MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x100
+ >;
+ };
+
+ usdhc1_100mhz_pins: pinctrl-usdhc1g-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
+ >;
+ };
+
+ usdhc1_200mhz_pins: pinctrl-usdhc1-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
+ >;
+ };
+
+ usdhc3_pins: pinctrl-usdhc3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ wdog1_pins: pinctrl-wdog1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x140
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ uart-has-rtscts;
+ /* select 80MHz parent clock to support maximum baudrate 4Mbps */
+ assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ /* Murata 1MW module supports max. 3M baud */
+ max-speed = <3000000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usdhc1_pins>;
+ pinctrl-1 = <&usdhc1_100mhz_pins>;
+ pinctrl-2 = <&usdhc1_200mhz_pins>;
+ vmmc-supply = <&v_3_3>;
+ vqmmc-supply = <&v_1_8>;
+ bus-width = <4>;
+ mmc-pwrseq = <&usdhc1_pwrseq>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&usdhc3_pins>;
+ pinctrl-1 = <&usdhc3_100mhz_pins>;
+ pinctrl-2 = <&usdhc3_200mhz_pins>;
+ vmmc-supply = <&v_3_3>;
+ vqmmc-supply = <&v_1_8>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wdog1_pins>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
index afd886d..88ad422 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -36,6 +36,24 @@ external-sensor-supply {
vout-supply = <®_5v0_sensor>;
};
+ flexcan1_phy: can-phy0 {
+ compatible = "ti,tcan1051", "ti,tcan1042";
+ #phy-cells = <0>;
+ pinctrl-0 = <&pinctrl_flexcan1_stby>;
+ pinctrl-names = "default";
+ max-bitrate = <5000000>;
+ standby-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ flexcan2_phy: can-phy1 {
+ compatible = "ti,tcan1051", "ti,tcan1042";
+ #phy-cells = <0>;
+ pinctrl-0 = <&pinctrl_flexcan2_stby>;
+ pinctrl-names = "default";
+ max-bitrate = <5000000>;
+ standby-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ };
+
reg_1v8_per: regulator-1v8-per {
compatible = "regulator-fixed";
pinctrl-0 = <&pinctrl_reg_1v8>;
@@ -85,26 +103,6 @@ reg_6v4: regulator-6v4 {
regulator-name = "6v4";
};
- reg_can1_stby: regulator-can1-stby {
- compatible = "regulator-fixed";
- pinctrl-0 = <&pinctrl_flexcan1_reg>;
- pinctrl-names = "default";
- regulator-max-microvolt = <3300000>;
- regulator-min-microvolt = <3300000>;
- regulator-name = "can1-stby";
- gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
- };
-
- reg_can2_stby: regulator-can2-stby {
- compatible = "regulator-fixed";
- pinctrl-0 = <&pinctrl_flexcan2_reg>;
- pinctrl-names = "default";
- regulator-max-microvolt = <3300000>;
- regulator-min-microvolt = <3300000>;
- regulator-name = "can2-stby";
- gpio = <&gpio5 9 GPIO_ACTIVE_LOW>;
- };
-
sound {
compatible = "simple-audio-card";
simple-audio-card,bitclock-master = <&cpudai>;
@@ -180,16 +178,16 @@ adc@2 {
};
&flexcan1 {
+ phys = <&flexcan1_phy>;
pinctrl-0 = <&pinctrl_flexcan1>;
pinctrl-names = "default";
- xceiver-supply = <®_can1_stby>;
status = "okay";
};
&flexcan2 {
+ phys = <&flexcan2_phy>;
pinctrl-0 = <&pinctrl_flexcan2>;
pinctrl-names = "default";
- xceiver-supply = <®_can2_stby>;
status = "okay";
};
@@ -278,7 +276,7 @@ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX
>;
};
- pinctrl_flexcan1_reg: flexcan1reggrp {
+ pinctrl_flexcan1_stby: flexcan1stbygrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03
(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
@@ -294,7 +292,7 @@ MX8MP_IOMUXC_UART3_RXD__CAN2_TX
>;
};
- pinctrl_flexcan2_reg: flexcan2reggrp {
+ pinctrl_flexcan2_stby: flexcan2stbygrp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09
(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
new file mode 100644
index 0000000..9ecec1a4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Ultratronik
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+ model = "NXP i.MX8MPlus Ultratronik MMI_A53 board";
+ compatible = "ultratronik,imx8mp-ultra-mach-sbc", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ rtc0 = &hwrtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ gpio-sbu-mux {
+ compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbu_mux>;
+ select-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ orientation-switch;
+
+ port {
+ usb3_data_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-0 {
+ gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* Wakeup */
+ label = "Wakeup";
+ linux,code = <KEY_WAKEUP>;
+ pinctrl-0 = <&pinctrl_gpio_key_wakeup>;
+ pinctrl-names = "default";
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led1 {
+ label = "red";
+ gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "green";
+ gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "yellow";
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ reg_usba_vbus: regulator-usba-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ regulator-name = "usb-A-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ slb9670: tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_slb9670>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ecspi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio1 8 GPIO_ACTIVE_LOW>,
+ <&gpio1 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ nfc-transceiver@1 {
+ compatible = "st,st95hf";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ spi-max-frequency = <100000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ enable-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "#TPM_IRQ", "GPIO1", "", "#PMIC_INT",
+ "SD2_VSEL", "#TOUCH_IRQ", "#NFC_INT_I", "#NFC_INT",
+ "#SPI2_CS2", "#SPI2_CS3", "#RTS4", "",
+ "USB_PWR", "GPIO2", "GPIO3", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "#SD2_CD", "", "", "",
+ "", "", "", "", "#USB-C_EN", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "DISP_POW", "GPIO4",
+ "#", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "BKL_POW", "#ETH1_INT", "#TPM_RES", "#PCAP_RES",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "#ETH0_INT", "#USB-C_ALERT",
+ "#USB-C_SEL", "", "", "",
+ "LED_RED", "LED_GREEN", "LED_YELLOW", "#WAKEUP",
+ "", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "#SPI1_CS", "", "", "", "#SPI2_CS1", "", "",
+ "", "", "", "", "ENA_KAM", "ENA_LED", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 GPIO_ACTIVE_LOW>;
+
+ /*
+ * i.MX 8M Plus Data Sheet for Consumer Products
+ * 3.1.4 Operating ranges
+ * MIMX8ML8DVNLZAB
+ */
+ regulators {
+ buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 { /* VDD_ARM */
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ buck4: BUCK4 { /* +3V3 */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5: BUCK5 { /* +1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6: BUCK6 { /* DRAM_1V1 */
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1: LDO1 { /* NVCC_SNVS_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3: LDO3 { /* VDDA_1P8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 { /* ENET_2V5 */
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5: LDO5 { /* NVCC_SD2 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ crypto@35 {
+ compatible = "atmel,atecc508a";
+ reg = <0x35>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ hwrtc: rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ epson,vdet-disable;
+ trickle-diode-disable;
+ };
+
+ tcpc@52 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x52>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ptn5110>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 5000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec_dr_sw: endpoint {
+ remote-endpoint = <&usb3_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ typec_con_ss: endpoint {
+ remote-endpoint = <&usb3_data_ss>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c5 { /* HDMI EDID bus */
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c5>;
+ pinctrl-1 = <&pinctrl_i2c5_gpio>;
+ scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart2 {
+ /* system console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ /* expansion port serial connection */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ usb3_drd_sw: endpoint {
+ remote-endpoint = <&typec_dr_sw>;
+ };
+ };
+};
+
+&usb3_phy1 {
+ vbus-supply = <®_usba_vbus>;
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ snps,hsphy_interface = "utmi";
+ status = "okay";
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <&ldo5>;
+ status = "okay";
+};
+
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ vmmc-supply = <&buck4>;
+ vqmmc-supply = <&buck5>;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_ecspi1_cs: ecspi1-cs-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 /* #SPI1_CS */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82
+ >;
+ };
+
+ pinctrl_ecspi2_cs: ecspi2-cs-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 /* #SPI2_CS */
+ MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40 /* #SPI2_CS2 */
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40 /* #SPI2_CS3 */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82
+ >;
+ };
+
+ pinctrl_eqos: eqos-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x0
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x0
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x10 /* #ETH0_INT */
+ >;
+ };
+
+ pinctrl_fec: fec-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x0
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x0
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
+ MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x10 /* #ETH1_INT */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
+ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
+ >;
+ };
+
+ pinctrl_gpio_key_wakeup: gpio-key-wakeup-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x40 /* #WAKEUP */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpio-leds-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x40 /* LED_RED */
+ MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40 /* LED_GREEN */
+ MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x40 /* LED_YELLOW */
+ >;
+ };
+
+ pinctrl_hdmi: hdmi-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
+ >;
+ };
+
+ pinctrl_hog: hog-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x40 /* GPIO1 */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x40 /* GPIO2 */
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x40 /* GPIO3 */
+ MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40 /* GPIO4 */
+ MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x40 /* ENA_KAM */
+ MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x40 /* ENA_LED */
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x40 /* #PCAP_RES */
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x40 /* #RTS4 */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c0
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c0
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0xc0
+ MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0xc0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c0
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c0
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0xc0
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0xc0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0xc2
+ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0xc2
+ >;
+ };
+
+ pinctrl_i2c5: i2c5-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x400000c4
+ MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x400000c4
+ >;
+ };
+
+ pinctrl_i2c5_gpio: i2c5-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0xc4
+ MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0xc4
+ >;
+ };
+
+ pinctrl_nfc: nfc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x40 /* NFC_INT_I */
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x40 /* NFC_INT */
+ >;
+ };
+
+ pinctrl_pmic: pmic-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40 /* #PMIC_INT */
+ >;
+ };
+
+ pinctrl_ptn5110: ptn5110-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x1c4 /* #USB-C_ALERT */
+ >;
+ };
+
+ pinctrl_pwm1: pwm1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116
+ >;
+ };
+
+ pinctrl_pwm2: pwm2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x116 /* EXT_PWM */
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: reg-usdhc2-vmmc-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
+ >;
+ };
+
+ pinctrl_sbu_mux: sbu-mux-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x16 /* #USB-C_SEL */
+ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x16 /* #USB-C_EN */
+ >;
+ };
+
+ pinctrl_slb9670: slb9670-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x40 /* #TPM_IRQ */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40 /* #TPM_RES */
+ >;
+ };
+
+ pinctrl_uart2: uart2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_uart3: uart3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x40
+ MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_uart4: uart4-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x40
+ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_usb1: usb1-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x40 /* USB_PWR */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 /* SD2_VSEL */
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 /* SD2_VSEL */
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 /* SD2_VSEL */
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x40 /* #SD3_RESET */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x192
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d2
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d2
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d2
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d2
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d2
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d2
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x192
+ >;
+ };
+
+ pinctrl_wdog: wdog-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 /* #WDOG */
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index d6d21e8..a3de660 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1701,9 +1701,12 @@ isp_0: isp@32e10000 {
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
- <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
- clock-names = "isp", "aclk", "hclk";
- power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+ clock-names = "isp", "aclk", "hclk", "pclk";
+ power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+ <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+ power-domain-names = "isp", "csi2";
fsl,blk-ctrl = <&media_blk_ctrl 0>;
status = "disabled";
@@ -1723,9 +1726,12 @@ isp_1: isp@32e20000 {
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
- <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
- clock-names = "isp", "aclk", "hclk";
- power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+ clock-names = "isp", "aclk", "hclk", "pclk";
+ power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+ <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+ power-domain-names = "isp", "csi2";
fsl,blk-ctrl = <&media_blk_ctrl 1>;
status = "disabled";
@@ -2045,6 +2051,10 @@ hdmi_blk_ctrl: blk-ctrl@32fc0000 {
"pai", "pvi", "trng",
"hdmi-tx", "hdmi-tx-phy",
"hdcp", "hrv";
+ interconnects = <&noc IMX8MP_ICM_HRV &noc IMX8MP_ICN_HDMI>,
+ <&noc IMX8MP_ICM_LCDIF_HDMI &noc IMX8MP_ICN_HDMI>,
+ <&noc IMX8MP_ICM_HDCP &noc IMX8MP_ICN_HDMI>;
+ interconnect-names = "hrv", "lcdif-hdmi", "hdcp";
#power-domain-cells = <1>;
};
@@ -2317,6 +2327,7 @@ gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
<0x38880000 0xc0000>;
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 43e45b0..a88bc90 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -108,6 +108,7 @@ sound-wm8524 {
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&cpudai>;
simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Line", "Left Line Out Jack",
"Line", "Right Line Out Jack";
@@ -117,11 +118,11 @@ sound-wm8524 {
cpudai: simple-audio-card,cpu {
sound-dai = <&sai2>;
+ system-clock-direction-out;
};
link_codec: simple-audio-card,codec {
sound-dai = <&wm8524>;
- clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
};
};
@@ -440,6 +441,11 @@ &sai2 {
assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
assigned-clock-rates = <0>, <24576000>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_SAI2_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+ <&clk IMX8MQ_AUDIO_PLL2_OUT>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index c9040d1..607962f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1890,6 +1890,7 @@ gic: interrupt-controller@38800000 {
<0x31000000 0x2000>, /* GICC */
<0x31010000 0x2000>, /* GICV */
<0x31020000 0x2000>; /* GICH */
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 95523c5..202d5c6 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -406,8 +406,8 @@ sound-wm8960 {
model = "wm8960-audio";
audio-cpu = <&sai1>;
audio-codec = <&wm8960>;
- hp-det-gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
- audio-routing = "Headphone Jack", "HP_L",
+ hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+ audio-routing = "Headphone Jack", "HP_L",
"Headphone Jack", "HP_R",
"Ext Spk", "SPK_LP",
"Ext Spk", "SPK_LN",
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
index 50c0f6b..bd6e0aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -30,10 +30,10 @@ pcie0: pciea: pcie@5f000000 {
clock-names = "dbi", "mstr", "slv";
bus-range = <0x00 0xff>;
device_type = "pci";
- interrupt-map = <0 0 0 1 &gic 0 73 4>,
- <0 0 0 2 &gic 0 74 4>,
- <0 0 0 3 &gic 0 75 4>,
- <0 0 0 4 &gic 0 76 4>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 0x7>;
num-lanes = <1>;
num-viewport = <4>;
@@ -80,10 +80,10 @@ pcie1: pcieb: pcie@5f010000 {
clock-names = "dbi", "mstr", "slv";
bus-range = <0x00 0xff>;
device_type = "pci";
- interrupt-map = <0 0 0 1 &gic 0 105 4>,
- <0 0 0 2 &gic 0 106 4>,
- <0 0 0 3 &gic 0 107 4>,
- <0 0 0 4 &gic 0 108 4>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 0x7>;
num-lanes = <1>;
num-viewport = <4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 827e136..5206ca8 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -245,6 +245,7 @@ gic: interrupt-controller@51a00000 {
<0x0 0x52000000 0 0x2000>, /* GICC */
<0x0 0x52010000 0 0x1000>, /* GICH */
<0x0 0x52020000 0 0x20000>; /* GICV */
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index e54be7f..7b03374 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -333,7 +333,7 @@ sound-wm8960 {
model = "wm8960-audio";
audio-cpu = <&sai1>;
audio-codec = <&wm8960>;
- hp-det-gpio = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+ hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
audio-routing = "Headphone Jack", "HP_L",
"Headphone Jack", "HP_R",
"Ext Spk", "SPK_LP",
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9e46e16..95edab0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -159,6 +159,7 @@ gic: interrupt-controller@51a00000 {
compatible = "arm,gic-v3";
reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
<0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
new file mode 100644
index 0000000..5497e3d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp-evk.dts"
+
+/ {
+ model = "NXP i.MX8ULP EVK9";
+ compatible = "fsl,imx8ulp-9x9-evk", "fsl,imx8ulp";
+};
+
+&btcpu {
+ sound-dai = <&sai6>;
+};
+
+&iomuxc1 {
+ pinctrl_sai6: sai6grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTE10__I2S6_TX_BCLK 0x43
+ MX8ULP_PAD_PTE11__I2S6_TX_FS 0x43
+ MX8ULP_PAD_PTE14__I2S6_TXD2 0x43
+ MX8ULP_PAD_PTE6__I2S6_RXD0 0x43
+ >;
+ };
+};
+
+&pinctrl_enet {
+ fsl,pins = <
+ MX8ULP_PAD_PTF9__ENET0_MDC 0x43
+ MX8ULP_PAD_PTF8__ENET0_MDIO 0x43
+ MX8ULP_PAD_PTF5__ENET0_RXER 0x43
+ MX8ULP_PAD_PTF6__ENET0_CRS_DV 0x43
+ MX8ULP_PAD_PTF1__ENET0_RXD0 0x43
+ MX8ULP_PAD_PTF0__ENET0_RXD1 0x43
+ MX8ULP_PAD_PTF4__ENET0_TXEN 0x43
+ MX8ULP_PAD_PTF3__ENET0_TXD0 0x43
+ MX8ULP_PAD_PTF2__ENET0_TXD1 0x43
+ MX8ULP_PAD_PTF7__ENET0_REFCLK 0x43
+ MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+ >;
+};
+
+&pinctrl_usb1 {
+ fsl,pins = <
+ MX8ULP_PAD_PTE16__USB0_ID 0x10003
+ MX8ULP_PAD_PTE18__USB0_OC 0x10003
+ >;
+};
+
+&pinctrl_usb2 {
+ fsl,pins = <
+ MX8ULP_PAD_PTD23__USB1_ID 0x10003
+ MX8ULP_PAD_PTE20__USB1_OC 0x10003
+ >;
+};
+
+&sai6 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sai6>;
+ pinctrl-1 = <&pinctrl_sai6>;
+ assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>, <&cgc2 IMX8ULP_CLK_SAI6_SEL>;
+ assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+ assigned-clock-rates = <12288000>;
+ fsl,dataline = <1 0x01 0x04>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index e602d14..8e9e841 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -462,11 +462,11 @@ &lsio_pwm2 {
/* VPU Mailboxes */
&mu_m0 {
- status="okay";
+ status = "okay";
};
&mu1_m0 {
- status="okay";
+ status = "okay";
};
/* TODO MIPI CSI */
diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
new file mode 100644
index 0000000..aca7876
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+ compatible = "fsl,imx91-11x11-evk", "fsl,imx91";
+ model = "NXP i.MX91 11X11 EVK board";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ rtc0 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vref_1v8";
+ };
+
+ reg_audio_pwr: regulator-audio-pwr {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "audio-pwr";
+ gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <12000>;
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0x80000000 0 0x40000000>;
+ reusable;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&eqos {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-1 = <&pinctrl_eqos_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ realtek,clkout-disable;
+ };
+ };
+};
+
+&fec {
+ phy-handle = <ðphy2>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
+ pinctrl-names = "default", "sleep";
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ realtek,clkout-disable;
+ };
+ };
+};
+
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ audio_codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clk IMX93_CLK_SAI3_GATE>;
+ AVDD-supply = <®_audio_pwr>;
+ CPVDD-supply = <®_audio_pwr>;
+ DBVDD-supply = <®_audio_pwr>;
+ DCVDD-supply = <®_audio_pwr>;
+ MICVDD-supply = <®_audio_pwr>;
+ PLLVDD-supply = <®_audio_pwr>;
+ SPKVDD1-supply = <®_audio_pwr>;
+ SPKVDD2-supply = <®_audio_pwr>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+
+ inertial-meter@6a {
+ compatible = "st,lsm6dso";
+ reg = <0x6a>;
+ };
+};
+
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio3>;
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ pinctrl-names = "default";
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&pcal6524>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2237500>;
+ regulator-min-microvolt = <650000>;
+ regulator-name = "BUCK1";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2187500>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK2";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK4";
+ };
+
+ buck5: BUCK5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK5";
+ };
+
+ buck6: BUCK6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK6";
+ };
+
+ ldo1: LDO1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1600000>;
+ regulator-name = "LDO1";
+ };
+
+ ldo4: LDO4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <800000>;
+ regulator-name = "LDO4";
+ };
+
+ ldo5: LDO5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "LDO5";
+ };
+ };
+ };
+
+ adp5585: io-expander@34 {
+ compatible = "adi,adp5585-00", "adi,adp5585";
+ reg = <0x34>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #pwm-cells = <3>;
+ gpio-reserved-ranges = <5 1>;
+
+ exp-sel-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio3>;
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <15000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+
+ ptn5110_2: tcpc@51 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x51>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio3>;
+ status = "okay";
+
+ typec2_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <15000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec2_dr_sw: endpoint {
+ remote-endpoint = <&usb2_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+
+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&pcal6524>;
+ status = "okay";
+ };
+};
+
+&lpuart1 {
+ pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lpuart5 {
+ pinctrl-0 = <&pinctrl_uart5>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+&usbotg1 {
+ adp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usbotg2 {
+ adp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ status = "okay";
+
+ port {
+ usb2_drd_sw: endpoint {
+ remote-endpoint = <&typec2_dr_sw>;
+ };
+ };
+};
+
+&usdhc1 {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ status = "okay";
+};
+
+&usdhc2 {
+ bus-width = <4>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ no-mmc;
+ no-sdio;
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX91_PAD_ENET1_MDC__ENET1_MDC 0x57e
+ MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
+ MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
+ MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
+ MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
+ MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
+ MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x5fe
+ MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
+ MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x57e
+ MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
+ MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
+ MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe
+ MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_eqos_sleep: eqossleepgrp {
+ fsl,pins = <
+ MX91_PAD_ENET1_MDC__GPIO4_IO0 0x31e
+ MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x31e
+ MX91_PAD_ENET1_RD0__GPIO4_IO10 0x31e
+ MX91_PAD_ENET1_RD1__GPIO4_IO11 0x31e
+ MX91_PAD_ENET1_RD2__GPIO4_IO12 0x31e
+ MX91_PAD_ENET1_RD3__GPIO4_IO13 0x31e
+ MX91_PAD_ENET1_RXC__GPIO4_IO9 0x31e
+ MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 0x31e
+ MX91_PAD_ENET1_TD0__GPIO4_IO5 0x31e
+ MX91_PAD_ENET1_TD1__GPIO4_IO4 0x31e
+ MX91_PAD_ENET1_TD2__GPIO4_IO3 0x31e
+ MX91_PAD_ENET1_TD3__GPIO4_IO2 0x31e
+ MX91_PAD_ENET1_TXC__GPIO4_IO7 0x31e
+ MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 0x31e
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX91_PAD_ENET2_MDC__ENET2_MDC 0x57e
+ MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x57e
+ MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x57e
+ MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x57e
+ MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x57e
+ MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x57e
+ MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x5fe
+ MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x57e
+ MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x57e
+ MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x57e
+ MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x57e
+ MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x57e
+ MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x5fe
+ MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_fec_sleep: fecsleepgrp {
+ fsl,pins = <
+ MX91_PAD_ENET2_MDC__GPIO4_IO14 0x51e
+ MX91_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
+ MX91_PAD_ENET2_RD0__GPIO4_IO24 0x51e
+ MX91_PAD_ENET2_RD1__GPIO4_IO25 0x51e
+ MX91_PAD_ENET2_RD2__GPIO4_IO26 0x51e
+ MX91_PAD_ENET2_RD3__GPIO4_IO27 0x51e
+ MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e
+ MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
+ MX91_PAD_ENET2_TD0__GPIO4_IO19 0x51e
+ MX91_PAD_ENET2_TD1__GPIO4_IO18 0x51e
+ MX91_PAD_ENET2_TD2__GPIO4_IO17 0x51e
+ MX91_PAD_ENET2_TD3__GPIO4_IO16 0x51e
+ MX91_PAD_ENET2_TXC__GPIO4_IO21 0x51e
+ MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
+ MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcal6524: pcal6524grp {
+ fsl,pins = <
+ MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x31e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX91_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX91_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX91_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x1382
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x1382
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1382
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x1382
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x1382
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x1382
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1382
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1382
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1382
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x13fe
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x1582
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1382
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x1382
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x1382
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x1382
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__GPIO3_IO1 0x51e
+ MX91_PAD_SD2_CMD__GPIO3_IO2 0x51e
+ MX91_PAD_SD2_DATA0__GPIO3_IO3 0x51e
+ MX91_PAD_SD2_DATA1__GPIO3_IO4 0x51e
+ MX91_PAD_SD2_DATA2__GPIO3_IO5 0x51e
+ MX91_PAD_SD2_DATA3__GPIO3_IO6 0x51e
+ MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
+ >;
+ };
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-pinfunc.h b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
new file mode 100644
index 0000000..3e19945
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __DTS_IMX91_PINFUNC_H
+#define __DTS_IMX91_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX91_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01b0 0x03d8 0x00 0x00
+#define MX91_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01b0 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDI__CAN2_TX 0x0000 0x01b0 0x0000 0x03 0x00
+#define MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01b0 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01b0 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01b0 0x0488 0x06 0x00
+
+#define MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01b4 0x03dc 0x00 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01b4 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01b4 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01b4 0x0000 0x06 0x00
+
+#define MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01b8 0x03d4 0x00 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01b8 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01b8 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01b8 0x0484 0x06 0x00
+
+#define MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000c 0x01bc 0x0000 0x00 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000c 0x01bc 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000c 0x01bc 0x0364 0x03 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000c 0x01bc 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000c 0x01bc 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000c 0x01bc 0x048c 0x06 0x00
+
+#define MX91_PAD_GPIO_IO00__GPIO2_IO0 0x0010 0x01c0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01c0 0x03f4 0x01 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01c0 0x04bc 0x02 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01c0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01c0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01c0 0x048c 0x05 0x01
+#define MX91_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01c0 0x0404 0x06 0x00
+#define MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0 0x0010 0x01c0 0x036c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO01__GPIO2_IO1 0x0014 0x01c4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01c4 0x03f0 0x01 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0 0x0014 0x01c4 0x0490 0x02 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01c4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01c4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01c4 0x0488 0x05 0x01
+#define MX91_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01c4 0x0400 0x06 0x00
+#define MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1 0x0014 0x01c4 0x0370 0x07 0x00
+
+#define MX91_PAD_GPIO_IO02__GPIO2_IO2 0x0018 0x01c8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01c8 0x03fc 0x01 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01c8 0x04c0 0x02 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01c8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01c8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01c8 0x0484 0x05 0x01
+#define MX91_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01c8 0x040c 0x06 0x00
+#define MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2 0x0018 0x01c8 0x0374 0x07 0x00
+
+#define MX91_PAD_GPIO_IO03__GPIO2_IO3 0x001c 0x01cc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C4_SCL 0x001c 0x01cc 0x03f8 0x01 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001c 0x01cc 0x04b8 0x02 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001c 0x01cc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO03__LPSPI6_SCK 0x001c 0x01cc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO03__LPUART5_RTS_B 0x001c 0x01cc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C6_SCL 0x001c 0x01cc 0x0408 0x06 0x00
+#define MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3 0x001c 0x01cc 0x0378 0x07 0x00
+
+#define MX91_PAD_GPIO_IO04__GPIO2_IO4 0x0020 0x01d0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01d0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO04__PDM_CLK 0x0020 0x01d0 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 0x0020 0x01d0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01d0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01d0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01d0 0x040c 0x06 0x01
+#define MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4 0x0020 0x01d0 0x037c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO05__GPIO2_IO5 0x0024 0x01d4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01d4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0 0x0024 0x01d4 0x04c4 0x02 0x00
+#define MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 0x0024 0x01d4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01d4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01d4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01d4 0x0408 0x06 0x01
+#define MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5 0x0024 0x01d4 0x0380 0x07 0x00
+
+#define MX91_PAD_GPIO_IO06__GPIO2_IO6 0x0028 0x01d8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01d8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1 0x0028 0x01d8 0x04c8 0x02 0x00
+#define MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 0x0028 0x01d8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01d8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01d8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01d8 0x0414 0x06 0x00
+#define MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6 0x0028 0x01d8 0x0384 0x07 0x00
+
+#define MX91_PAD_GPIO_IO07__GPIO2_IO7 0x002c 0x01dc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI3_PCS1 0x002c 0x01dc 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1 0x002c 0x01dc 0x0494 0x02 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 0x002c 0x01dc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI7_SCK 0x002c 0x01dc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO07__LPUART6_RTS_B 0x002c 0x01dc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO07__LPI2C7_SCL 0x002c 0x01dc 0x0410 0x06 0x00
+#define MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7 0x002c 0x01dc 0x0388 0x07 0x00
+
+#define MX91_PAD_GPIO_IO08__GPIO2_IO8 0x0030 0x01e0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01e0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2 0x0030 0x01e0 0x0498 0x02 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 0x0030 0x01e0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01e0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01e0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01e0 0x0414 0x06 0x01
+#define MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8 0x0030 0x01e0 0x038c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO09__GPIO2_IO9 0x0034 0x01e4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01e4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3 0x0034 0x01e4 0x049c 0x02 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 0x0034 0x01e4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01e4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01e4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01e4 0x0410 0x06 0x01
+#define MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9 0x0034 0x01e4 0x0390 0x07 0x00
+
+#define MX91_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01e8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01e8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4 0x0038 0x01e8 0x04a0 0x02 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 0x0038 0x01e8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01e8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01e8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01e8 0x041c 0x06 0x00
+#define MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01e8 0x0394 0x07 0x00
+
+#define MX91_PAD_GPIO_IO11__GPIO2_IO11 0x003c 0x01ec 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO11__LPSPI3_SCK 0x003c 0x01ec 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5 0x003c 0x01ec 0x04a4 0x02 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 0x003c 0x01ec 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO11__TPM5_EXTCLK 0x003c 0x01ec 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO11__LPUART7_RTS_B 0x003c 0x01ec 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO11__LPI2C8_SCL 0x003c 0x01ec 0x0418 0x06 0x00
+#define MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003c 0x01ec 0x0398 0x07 0x00
+
+#define MX91_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01f0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01f0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2 0x0040 0x01f0 0x04cc 0x02 0x00
+#define MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 0x0040 0x01f0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01f0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01f0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01f0 0x041c 0x06 0x01
+#define MX91_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01f0 0x04dc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01f4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01f4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3 0x0044 0x01f4 0x04d0 0x02 0x00
+#define MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 0x0044 0x01f4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01f4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01f4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01f4 0x0418 0x06 0x01
+#define MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01f4 0x039c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01f8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01f8 0x0474 0x01 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6 0x0048 0x01f8 0x04a8 0x02 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01f8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01f8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01f8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01f8 0x0480 0x06 0x00
+#define MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01f8 0x03a0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO15__GPIO2_IO15 0x004c 0x01fc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO15__LPUART3_RX 0x004c 0x01fc 0x0470 0x01 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7 0x004c 0x01fc 0x04ac 0x02 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004c 0x01fc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO15__LPSPI8_SCK 0x004c 0x01fc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO15__LPUART8_RTS_B 0x004c 0x01fc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO15__LPUART4_RX 0x004c 0x01fc 0x047c 0x06 0x00
+#define MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004c 0x01fc 0x03a4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2 0x0050 0x0200 0x04cc 0x02 0x01
+#define MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x046c 0x04 0x00
+#define MX91_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0478 0x06 0x00
+#define MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03a8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8 0x0054 0x0204 0x04b0 0x02 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x0054 0x0204 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0204 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0204 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03ac 0x07 0x00
+
+#define MX91_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x04d8 0x01 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9 0x0058 0x0208 0x04b4 0x02 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x0208 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03b0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO19__GPIO2_IO19 0x005c 0x020c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005c 0x020c 0x04dc 0x01 0x01
+#define MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3 0x005c 0x020c 0x04d0 0x02 0x01
+#define MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005c 0x020c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI5_SIN 0x005c 0x020c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI4_SIN 0x005c 0x020c 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO19__TPM6_CH2 0x005c 0x020c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_TX_DATA0 0x005c 0x020c 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO20__SAI3_RX_DATA0 0x0060 0x0210 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0 0x0060 0x0210 0x04c4 0x02 0x01
+#define MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0210 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 0x0060 0x0210 0x03b4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO21__GPIO2_IO21 0x0064 0x0214 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_TX_DATA0 0x0064 0x0214 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO21__PDM_CLK 0x0064 0x0214 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x0064 0x0214 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x04d8 0x07 0x01
+
+#define MX91_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x04e8 0x01 0x00
+#define MX91_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x04e4 0x02 0x00
+#define MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x0404 0x06 0x01
+#define MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03b8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO23__GPIO2_IO23 0x006c 0x021c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO23__USDHC3_CMD 0x006c 0x021c 0x04ec 0x01 0x00
+#define MX91_PAD_GPIO_IO23__SPDIF_OUT 0x006c 0x021c 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006c 0x021c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO23__TPM6_CH1 0x006c 0x021c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO23__LPI2C5_SCL 0x006c 0x021c 0x0400 0x06 0x01
+#define MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006c 0x021c 0x03bc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x04f0 0x01 0x00
+#define MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03c0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x04f4 0x01 0x00
+#define MX91_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03d4 0x05 0x01
+#define MX91_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03c4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x04f8 0x01 0x00
+#define MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1 0x0078 0x0228 0x04c8 0x02 0x01
+#define MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03d8 0x05 0x01
+#define MX91_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x04e0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO27__GPIO2_IO27 0x007c 0x022c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO27__USDHC3_DATA3 0x007c 0x022c 0x04fc 0x01 0x00
+#define MX91_PAD_GPIO_IO27__CAN2_RX 0x007c 0x022c 0x0364 0x02 0x01
+#define MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007c 0x022c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO27__TPM6_CH3 0x007c 0x022c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007c 0x022c 0x03dc 0x05 0x01
+#define MX91_PAD_GPIO_IO27__LPSPI5_PCS1 0x007c 0x022c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007c 0x022c 0x03c8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03f4 0x01 0x01
+#define MX91_PAD_GPIO_IO28__CAN1_TX 0x0080 0x0230 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03f0 0x01 0x01
+#define MX91_PAD_GPIO_IO29__CAN1_RX 0x0084 0x0234 0x0360 0x02 0x00
+#define MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x07 0x00
+
+#define MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x0088 0x0238 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x008c 0x023c 0x0000 0x05 0x00
+#define MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 0x008c 0x023c 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008c 0x023c 0x03c8 0x04 0x01
+
+#define MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_MDC__ENET1_MDC 0x0098 0x0248 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03cc 0x02 0x00
+#define MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0 0x0098 0x0248 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDC__GPIO4_IO0 0x0098 0x0248 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDC__LPI2C1_SCL 0x0098 0x0248 0x03e0 0x06 0x00
+
+#define MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009c 0x024c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009c 0x024c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDIO__I3C2_SDA 0x009c 0x024c 0x03d0 0x02 0x00
+#define MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009c 0x024c 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1 0x009c 0x024c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x009c 0x024c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDIO__LPI2C1_SDA 0x009c 0x024c 0x03e4 0x06 0x00
+
+#define MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x00a0 0x0250 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD3__CAN2_TX 0x00a0 0x0250 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 0x00a0 0x0250 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2 0x00a0 0x0250 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD3__GPIO4_IO2 0x00a0 0x0250 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD3__LPI2C2_SCL 0x00a0 0x0250 0x03e8 0x06 0x00
+
+#define MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x00a4 0x0254 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK 0x00a4 0x0254 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD2__CAN2_RX 0x00a4 0x0254 0x0364 0x02 0x02
+#define MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 0x00a4 0x0254 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3 0x00a4 0x0254 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD2__GPIO4_IO3 0x00a4 0x0254 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD2__LPI2C2_SDA 0x00a4 0x0254 0x03ec 0x06 0x00
+
+#define MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x00a8 0x0258 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD1__LPUART3_RTS_B 0x00a8 0x0258 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR 0x00a8 0x0258 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 0x00a8 0x0258 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4 0x00a8 0x0258 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD1__GPIO4_IO4 0x00a8 0x0258 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR_B 0x00a8 0x0258 0x0000 0x06 0x00
+
+#define MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00ac 0x025c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD0__LPUART3_TX 0x00ac 0x025c 0x0474 0x01 0x01
+#define MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5 0x00ac 0x025c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD0__GPIO4_IO5 0x00ac 0x025c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00b0 0x0260 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00b0 0x0260 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6 0x00b0 0x0260 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 0x00b0 0x0260 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK 0x00b0 0x0260 0x043c 0x02 0x00
+
+#define MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x00b4 0x0264 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER 0x00b4 0x0264 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7 0x00b4 0x0264 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TXC__GPIO4_IO7 0x00b4 0x0264 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TXC__LPSPI2_SIN 0x00b4 0x0264 0x0440 0x02 0x00
+
+#define MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x00b8 0x0268 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00b8 0x0268 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 0x00b8 0x0268 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8 0x00b8 0x0268 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 0x00b8 0x0268 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0 0x00b8 0x0268 0x0434 0x02 0x00
+
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x00bc 0x026c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x00bc 0x026c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9 0x00bc 0x026c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RXC__GPIO4_IO9 0x00bc 0x026c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RXC__LPSPI2_SOUT 0x00bc 0x026c 0x0444 0x02 0x00
+
+#define MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00c0 0x0270 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD0__LPUART3_RX 0x00c0 0x0270 0x0470 0x01 0x01
+#define MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00c0 0x0270 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD0__GPIO4_IO10 0x00c0 0x0270 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00c4 0x0274 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD1__LPUART3_CTS_B 0x00c4 0x0274 0x046c 0x01 0x01
+#define MX91_PAD_ENET1_RD1__LPTMR2_ALT1 0x00c4 0x0274 0x0448 0x03 0x00
+#define MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00c4 0x0274 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD1__GPIO4_IO11 0x00c4 0x0274 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00c8 0x0278 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD2__LPTMR2_ALT2 0x00c8 0x0278 0x044c 0x03 0x00
+#define MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00c8 0x0278 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD2__GPIO4_IO12 0x00c8 0x0278 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00cc 0x027c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00cc 0x027c 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_RD3__LPTMR2_ALT3 0x00cc 0x027c 0x0450 0x03 0x00
+#define MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00cc 0x027c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD3__GPIO4_IO13 0x00cc 0x027c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET2_MDC__ENET2_MDC 0x00d0 0x0280 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDC__LPUART4_DCB_B 0x00d0 0x0280 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDC__SAI2_RX_SYNC 0x00d0 0x0280 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 0x00d0 0x0280 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDC__GPIO4_IO14 0x00d0 0x0280 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK 0x00d0 0x0280 0x04bc 0x06 0x01
+
+#define MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x00d4 0x0284 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00d4 0x0284 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK 0x00d4 0x0284 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 0x00d4 0x0284 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDIO__GPIO4_IO15 0x00d4 0x0284 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0 0x00d4 0x0284 0x0490 0x06 0x01
+
+#define MX91_PAD_ENET2_TD3__SAI2_RX_DATA0 0x00d8 0x0288 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 0x00d8 0x0288 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD3__GPIO4_IO16 0x00d8 0x0288 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC 0x00d8 0x0288 0x04c0 0x06 0x01
+#define MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x00d8 0x0288 0x0000 0x00 0x00
+
+#define MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x00dc 0x028c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 0x00dc 0x028c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 0x00dc 0x028c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD2__GPIO4_IO17 0x00dc 0x028c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC 0x00dc 0x028c 0x04b8 0x06 0x01
+
+#define MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x00e0 0x0290 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD1__LPUART4_RTS_B 0x00e0 0x0290 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00e0 0x0290 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD1__GPIO4_IO18 0x00e0 0x0290 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1 0x00e0 0x0290 0x0494 0x06 0x01
+
+#define MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x00e4 0x0294 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD0__LPUART4_TX 0x00e4 0x0294 0x0480 0x01 0x01
+#define MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00e4 0x0294 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD0__GPIO4_IO19 0x00e4 0x0294 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2 0x00e4 0x0294 0x0498 0x06 0x01
+
+#define MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x00e8 0x0298 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x00e8 0x0298 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC 0x00e8 0x0298 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 0x00e8 0x0298 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x00e8 0x0298 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3 0x00e8 0x0298 0x049c 0x06 0x01
+
+#define MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x00ec 0x029c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TXC__ENET2_TX_ER 0x00ec 0x029c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TXC__SAI2_TX_BCLK 0x00ec 0x029c 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 0x00ec 0x029c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TXC__GPIO4_IO21 0x00ec 0x029c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4 0x00ec 0x029c 0x04a0 0x06 0x01
+
+#define MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x00f0 0x02a0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x00f0 0x02a0 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0 0x00f0 0x02a0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 0x00f0 0x02a0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x00f0 0x02a0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5 0x00f0 0x02a0 0x04a4 0x06 0x01
+
+#define MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x00f4 0x02a4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RXC__ENET2_RX_ER 0x00f4 0x02a4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00f4 0x02a4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RXC__GPIO4_IO23 0x00f4 0x02a4 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6 0x00f4 0x02a4 0x04a8 0x06 0x01
+
+#define MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x00f8 0x02a8 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD0__LPUART4_RX 0x00f8 0x02a8 0x047c 0x01 0x01
+#define MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00f8 0x02a8 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD0__GPIO4_IO24 0x00f8 0x02a8 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7 0x00f8 0x02a8 0x04ac 0x06 0x01
+
+#define MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x00fc 0x02ac 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD1__SPDIF_IN 0x00fc 0x02ac 0x04e4 0x01 0x01
+#define MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00fc 0x02ac 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD1__GPIO4_IO25 0x00fc 0x02ac 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8 0x00fc 0x02ac 0x04b0 0x06 0x01
+
+#define MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x0100 0x02b0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02b0 0x0478 0x01 0x01
+#define MX91_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02b0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02b0 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02b0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02b0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9 0x0100 0x02b0 0x04b4 0x06 0x01
+
+#define MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x0104 0x02b4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02b4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02b4 0x04e4 0x02 0x02
+#define MX91_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02b4 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02b4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02b4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8 0x0108 0x02b8 0x038c 0x04 0x01
+#define MX91_PAD_SD1_CLK__GPIO3_IO8 0x0108 0x02b8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CLK__USDHC1_CLK 0x0108 0x02b8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CLK__LPSPI2_SCK 0x0108 0x02b8 0x043c 0x03 0x01
+
+#define MX91_PAD_SD1_CMD__USDHC1_CMD 0x010c 0x02bc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9 0x010c 0x02bc 0x0390 0x04 0x01
+#define MX91_PAD_SD1_CMD__GPIO3_IO9 0x010c 0x02bc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CMD__LPSPI2_SIN 0x010c 0x02bc 0x0440 0x03 0x01
+
+#define MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x0110 0x02c0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 0x0110 0x02c0 0x0394 0x04 0x01
+#define MX91_PAD_SD1_DATA0__GPIO3_IO10 0x0110 0x02c0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA0__LPSPI2_PCS0 0x0110 0x02c0 0x0434 0x03 0x01
+
+#define MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x0114 0x02c4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 0x0114 0x02c4 0x0398 0x04 0x01
+#define MX91_PAD_SD1_DATA1__GPIO3_IO11 0x0114 0x02c4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT 0x0114 0x02c4 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA1__LPSPI2_SOUT 0x0114 0x02c4 0x0444 0x03 0x01
+
+#define MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x0118 0x02c8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 0x0118 0x02c8 0x0000 0x04 0x00
+#define MX91_PAD_SD1_DATA2__GPIO3_IO12 0x0118 0x02c8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY 0x0118 0x02c8 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA2__LPSPI2_PCS1 0x0118 0x02c8 0x0438 0x03 0x00
+
+#define MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x011c 0x02cc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x011c 0x02cc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 0x011c 0x02cc 0x039c 0x04 0x01
+#define MX91_PAD_SD1_DATA3__GPIO3_IO13 0x011c 0x02cc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA3__LPSPI1_PCS1 0x011c 0x02cc 0x0424 0x03 0x00
+
+#define MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x0120 0x02d0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4 0x0120 0x02d0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 0x0120 0x02d0 0x03a0 0x04 0x01
+#define MX91_PAD_SD1_DATA4__GPIO3_IO14 0x0120 0x02d0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA4__LPSPI1_PCS0 0x0120 0x02d0 0x0420 0x03 0x00
+
+#define MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x0124 0x02d4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5 0x0124 0x02d4 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA5__USDHC1_RESET_B 0x0124 0x02d4 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 0x0124 0x02d4 0x03a4 0x04 0x01
+#define MX91_PAD_SD1_DATA5__GPIO3_IO15 0x0124 0x02d4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA5__LPSPI1_SIN 0x0124 0x02d4 0x042c 0x03 0x00
+
+#define MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x0128 0x02d8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6 0x0128 0x02d8 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA6__USDHC1_CD_B 0x0128 0x02d8 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 0x0128 0x02d8 0x03a8 0x04 0x01
+#define MX91_PAD_SD1_DATA6__GPIO3_IO16 0x0128 0x02d8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA6__LPSPI1_SCK 0x0128 0x02d8 0x0428 0x03 0x00
+
+#define MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x012c 0x02dc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7 0x012c 0x02dc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA7__USDHC1_WP 0x012c 0x02dc 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 0x012c 0x02dc 0x03ac 0x04 0x01
+#define MX91_PAD_SD1_DATA7__GPIO3_IO17 0x012c 0x02dc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA7__LPSPI1_SOUT 0x012c 0x02dc 0x0430 0x03 0x00
+
+#define MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x0130 0x02e0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0130 0x02e0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 0x0130 0x02e0 0x03b0 0x04 0x01
+#define MX91_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02e0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02e4 0x0000 0x00 0x00
+#define MX91_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02e4 0x0000 0x01 0x00
+#define MX91_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02e4 0x0450 0x02 0x01
+#define MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02e4 0x0000 0x04 0x00
+#define MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02e4 0x0000 0x05 0x00
+#define MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02e4 0x0368 0x06 0x00
+
+#define MX91_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02e8 0x04e8 0x00 0x01
+#define MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02e8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CLK__LPUART1_CTS_B 0x0138 0x02e8 0x0454 0x02 0x00
+#define MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02e8 0x03b4 0x04 0x01
+#define MX91_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02e8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_CMD__USDHC3_CMD 0x013c 0x02ec 0x04ec 0x00 0x01
+#define MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013c 0x02ec 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CMD__LPUART1_RTS_B 0x013c 0x02ec 0x0000 0x02 0x00
+#define MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013c 0x02ec 0x0000 0x04 0x00
+#define MX91_PAD_SD3_CMD__GPIO3_IO21 0x013c 0x02ec 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02f0 0x04f0 0x00 0x01
+#define MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0 0x0140 0x02f0 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA0__LPUART2_CTS_B 0x0140 0x02f0 0x0460 0x02 0x00
+#define MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02f0 0x03b8 0x04 0x01
+#define MX91_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02f0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02f4 0x04f4 0x00 0x01
+#define MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1 0x0144 0x02f4 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA1__LPUART2_RTS_B 0x0144 0x02f4 0x0000 0x02 0x00
+#define MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02f4 0x03bc 0x04 0x01
+#define MX91_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02f4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02f8 0x04f8 0x00 0x01
+#define MX91_PAD_SD3_DATA2__LPI2C4_SDA 0x0148 0x02f8 0x03fc 0x02 0x01
+#define MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2 0x0148 0x02f8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02f8 0x03c0 0x04 0x01
+#define MX91_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02f8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x014c 0x02fc 0x04fc 0x00 0x01
+#define MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3 0x014c 0x02fc 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA3__LPI2C4_SCL 0x014c 0x02fc 0x03f8 0x02 0x01
+#define MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014c 0x02fc 0x03c4 0x04 0x01
+#define MX91_PAD_SD3_DATA3__GPIO3_IO25 0x014c 0x02fc 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03cc 0x02 0x01
+#define MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0 0x0150 0x0300 0x036c 0x04 0x01
+#define MX91_PAD_SD2_CD_B__GPIO3_IO0 0x0150 0x0300 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CD_B__LPI2C1_SCL 0x0150 0x0300 0x03e0 0x03 0x01
+
+#define MX91_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CLK__I2C1_SDA 0x0154 0x0304 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03d0 0x02 0x01
+#define MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1 0x0154 0x0304 0x0370 0x04 0x01
+#define MX91_PAD_SD2_CLK__GPIO3_IO1 0x0154 0x0304 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x06 0x00
+#define MX91_PAD_SD2_CLK__LPI2C1_SDA 0x0154 0x0304 0x03e4 0x03 0x01
+
+#define MX91_PAD_SD2_CMD__USDHC2_CMD 0x0158 0x0308 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN 0x0158 0x0308 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR 0x0158 0x0308 0x0000 0x02 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR_B 0x0158 0x0308 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2 0x0158 0x0308 0x0374 0x04 0x01
+#define MX91_PAD_SD2_CMD__GPIO3_IO2 0x0158 0x0308 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0158 0x0308 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x015c 0x030c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT 0x015c 0x030c 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA0__CAN2_TX 0x015c 0x030c 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3 0x015c 0x030c 0x0378 0x04 0x01
+#define MX91_PAD_SD2_DATA0__GPIO3_IO3 0x015c 0x030c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA0__LPUART1_TX 0x015c 0x030c 0x045c 0x03 0x00
+#define MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x015c 0x030c 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x0160 0x0310 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN 0x0160 0x0310 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA1__CAN2_RX 0x0160 0x0310 0x0364 0x02 0x03
+#define MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4 0x0160 0x0310 0x037c 0x04 0x01
+#define MX91_PAD_SD2_DATA1__GPIO3_IO4 0x0160 0x0310 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA1__LPUART1_RX 0x0160 0x0310 0x0458 0x03 0x00
+#define MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0160 0x0310 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x0164 0x0314 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT 0x0164 0x0314 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA2__MQS2_RIGHT 0x0164 0x0314 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5 0x0164 0x0314 0x0380 0x04 0x01
+#define MX91_PAD_SD2_DATA2__GPIO3_IO5 0x0164 0x0314 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA2__LPUART2_TX 0x0164 0x0314 0x0468 0x03 0x00
+#define MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0448 0x01 0x01
+#define MX91_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6 0x0168 0x0318 0x0384 0x04 0x01
+#define MX91_PAD_SD2_DATA3__GPIO3_IO6 0x0168 0x0318 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA3__LPUART2_RX 0x0168 0x0318 0x0464 0x03 0x00
+#define MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016c 0x031c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016c 0x031c 0x044c 0x01 0x01
+#define MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7 0x016c 0x031c 0x0388 0x04 0x01
+#define MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x016c 0x031c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016c 0x031c 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x03e0 0x00 0x02
+#define MX91_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SCL__GPIO1_IO0 0x0170 0x0320 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x03e4 0x00 0x02
+#define MX91_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SDA__GPIO1_IO1 0x0174 0x0324 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x03e8 0x00 0x01
+#define MX91_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x01 0x00
+#define MX91_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SCL__GPIO1_IO2 0x0178 0x0328 0x0000 0x05 0x00
+#define MX91_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x017c 0x032c 0x03ec 0x00 0x01
+#define MX91_PAD_I2C2_SDA__LPUART2_RIN_B 0x017c 0x032c 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SDA__TPM2_CH3 0x017c 0x032c 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017c 0x032c 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SDA__GPIO1_IO3 0x017c 0x032c 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_RXD__LPUART1_RX 0x0180 0x0330 0x0458 0x00 0x01
+#define MX91_PAD_UART1_RXD__ELE_UART_RX 0x0180 0x0330 0x0000 0x01 0x00
+#define MX91_PAD_UART1_RXD__LPSPI2_SIN 0x0180 0x0330 0x0440 0x02 0x02
+#define MX91_PAD_UART1_RXD__TPM1_CH0 0x0180 0x0330 0x0000 0x03 0x00
+#define MX91_PAD_UART1_RXD__GPIO1_IO4 0x0180 0x0330 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_TXD__LPUART1_TX 0x0184 0x0334 0x045c 0x00 0x01
+#define MX91_PAD_UART1_TXD__ELE_UART_TX 0x0184 0x0334 0x0000 0x01 0x00
+#define MX91_PAD_UART1_TXD__LPSPI2_PCS0 0x0184 0x0334 0x0434 0x02 0x02
+#define MX91_PAD_UART1_TXD__TPM1_CH1 0x0184 0x0334 0x0000 0x03 0x00
+#define MX91_PAD_UART1_TXD__GPIO1_IO5 0x0184 0x0334 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_RXD__LPUART2_RX 0x0188 0x0338 0x0464 0x00 0x01
+#define MX91_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0454 0x01 0x01
+#define MX91_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0444 0x02 0x02
+#define MX91_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x03 0x00
+#define MX91_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x04d4 0x04 0x00
+#define MX91_PAD_UART2_RXD__GPIO1_IO6 0x0188 0x0338 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_TXD__LPUART2_TX 0x018c 0x033c 0x0468 0x00 0x01
+#define MX91_PAD_UART2_TXD__LPUART1_RTS_B 0x018c 0x033c 0x0000 0x01 0x00
+#define MX91_PAD_UART2_TXD__LPSPI2_SCK 0x018c 0x033c 0x043c 0x02 0x02
+#define MX91_PAD_UART2_TXD__TPM1_CH3 0x018c 0x033c 0x0000 0x03 0x00
+#define MX91_PAD_UART2_TXD__GPIO1_IO7 0x018c 0x033c 0x0000 0x05 0x00
+#define MX91_PAD_UART2_TXD__SAI3_TX_SYNC 0x018c 0x033c 0x04e0 0x07 0x02
+
+#define MX91_PAD_PDM_CLK__PDM_CLK 0x0190 0x0340 0x0000 0x00 0x00
+#define MX91_PAD_PDM_CLK__MQS1_LEFT 0x0190 0x0340 0x0000 0x01 0x00
+#define MX91_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x04 0x00
+#define MX91_PAD_PDM_CLK__GPIO1_IO8 0x0190 0x0340 0x0000 0x05 0x00
+#define MX91_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x06 0x00
+
+#define MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x0194 0x0344 0x04c4 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x01 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0424 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9 0x0194 0x0344 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x06 0x01
+
+#define MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x0198 0x0348 0x04c8 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0438 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 0x0198 0x0348 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x0198 0x0348 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 0x0198 0x0348 0x0368 0x06 0x01
+
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x019c 0x034c 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1 0x019c 0x034c 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXFS__LPSPI1_PCS0 0x019c 0x034c 0x0420 0x02 0x01
+#define MX91_PAD_SAI1_TXFS__LPUART2_DTR_B 0x019c 0x034c 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXFS__MQS1_LEFT 0x019c 0x034c 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x019c 0x034c 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x01a0 0x0350 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXC__LPUART2_CTS_B 0x01a0 0x0350 0x0460 0x01 0x01
+#define MX91_PAD_SAI1_TXC__LPSPI1_SIN 0x01a0 0x0350 0x042c 0x02 0x01
+#define MX91_PAD_SAI1_TXC__LPUART1_DSR_B 0x01a0 0x0350 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXC__CAN1_RX 0x01a0 0x0350 0x0360 0x04 0x02
+#define MX91_PAD_SAI1_TXC__GPIO1_IO12 0x01a0 0x0350 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x01a4 0x0354 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXD0__LPUART2_RTS_B 0x01a4 0x0354 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXD0__LPSPI1_SCK 0x01a4 0x0354 0x0428 0x02 0x01
+#define MX91_PAD_SAI1_TXD0__LPUART1_DTR_B 0x01a4 0x0354 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXD0__CAN1_TX 0x01a4 0x0354 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXD0__GPIO1_IO13 0x01a4 0x0354 0x0000 0x05 0x00
+#define MX91_PAD_SAI1_TXD0__SAI1_MCLK 0x01a4 0x0354 0x04d4 0x06 0x01
+
+#define MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x01a8 0x0358 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_RXD0__SAI1_MCLK 0x01a8 0x0358 0x04d4 0x01 0x02
+#define MX91_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01a8 0x0358 0x0430 0x02 0x01
+#define MX91_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01a8 0x0358 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_RXD0__MQS1_RIGHT 0x01a8 0x0358 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x01a8 0x0358 0x0000 0x05 0x00
+
+#define MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x01ac 0x035c 0x0000 0x00 0x00
+#define MX91_PAD_WDOG_ANY__GPIO1_IO15 0x01ac 0x035c 0x0000 0x05 0x00
+#endif /* __DTS_IMX91_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
new file mode 100644
index 0000000..5c430e6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
@@ -0,0 +1,739 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx91-tqma9131.dtsi"
+
+/{
+ model = "TQ-Systems i.MX91 TQMa91xxLA/TQMa91xxCA on MBa91xxCA starter kit";
+ compatible = "tq,imx91-tqma9131-mba91xxca", "tq,imx91-tqma9131", "fsl,imx91";
+ chassis-type = "embedded";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ aliases {
+ eeprom0 = &eeprom0;
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ rtc0 = &pcf85063;
+ rtc1 = &bbnsm_rtc;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpm2 2 5000000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_12v0>;
+ enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ display: display {
+ /*
+ * Display is not fixed, so compatible has to be added from
+ * DT overlay
+ */
+ power-supply = <®_3v3>;
+ enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ status = "disabled";
+
+ port {
+ panel_in: endpoint {
+ };
+ };
+ };
+
+ fan0: gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0>, <10000 1>;
+ fan-supply = <®_12v0>;
+ #cooling-cells = <2>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ switch-a {
+ label = "switcha";
+ linux,code = <BTN_0>;
+ gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ switch-b {
+ label = "switchb";
+ linux,code = <BTN_1>;
+ gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+ };
+
+ lvds_encoder: lvds-encoder {
+ compatible = "ti,sn75lvds83", "lvds-encoder";
+ powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+ power-supply = <®_3v3>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_encoder_input: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_encoder_output: endpoint {
+ };
+ };
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MB";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_5V0_MB";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_mpcie_1v5: regulator-mpcie-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V5_MPCIE";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_mpcie_3v3: regulator-mpcie-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_MPCIE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_eqos>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy_eqos: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_phy>;
+ reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ enet-phy-lane-no-swap;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy_fec>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy_fec: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_phy>;
+ reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ enet-phy-lane-no-swap;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_3v3>;
+ status = "okay";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* 00 */ "", "", "", "PMIC_IRQ#",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+ /* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* 00 */ "", "", "", "",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_jtag>;
+ gpio-line-names =
+ /* 00 */ "SD2_CD#", "", "", "",
+ /* 04 */ "", "", "", "SD2_RST#",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+ /* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ /* 00 */ "", "", "", "",
+ /* 04 */ "", "", "", "",
+ /* 08 */ "", "", "", "",
+ /* 12 */ "", "", "", "",
+ /* 16 */ "", "", "", "",
+ /* 20 */ "", "", "", "",
+ /* 24 */ "", "", "", "",
+ /* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ temperature-sensor@1c {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x1c>;
+ };
+
+ ptn5110: usb-typec@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "X17";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ typec-power-opmode = "default";
+ pd-disable;
+ self-powered;
+
+ port {
+ typec_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+ };
+ };
+
+ eeprom2: eeprom@54 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x54>;
+ pagesize = <16>;
+ vcc-supply = <®_3v3>;
+ };
+
+ expander0: gpio@70 {
+ compatible = "nxp,pca9538";
+ reg = <0x70>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pexp_irq>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+ "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+ "MPCIE_PERST#", "MPCIE_WDISABLE#",
+ "BUTTON_A#", "BUTTON_B#";
+
+ temp-event-mod-hog {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "TEMP_EVENT_MOD#";
+ };
+
+ mpcie-wake-hog {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "MPCIE_WAKE#";
+ };
+
+ /*
+ * Controls the mPCIE slot reset which is low active as
+ * reset signal. The output-low states, the signal is
+ * inactive, e.g. not in reset
+ */
+ mpcie_rst_hog: mpcie-rst-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "MPCIE_PERST#";
+ };
+
+ /*
+ * Controls the mPCIE slot WDISABLE pin which is low active
+ * as disable signal. The output-low states, the signal is
+ * inactive, e.g. not disabled
+ */
+ mpcie_wdisable_hog: mpcie-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "MPCIE_WDISABLE#";
+ };
+ };
+
+ expander1: gpio@71 {
+ compatible = "nxp,pca9538";
+ reg = <0x71>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+ "USB_RESET#", "",
+ "WLAN_PD#", "WLAN_W_DISABLE#",
+ "WLAN_PERST#", "12V_EN";
+
+ /*
+ * Controls the WiFi card PD pin which is low active
+ * as power down signal. The output-low states, the signal
+ * is inactive, e.g. not power down
+ */
+ wlan-pd-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_PD#";
+ };
+
+ /*
+ * Controls the WiFi card disable pin which is low active
+ * as disable signal. The output-low states, the signal
+ * is inactive, e.g. not disabled
+ */
+ wlan-wdisable-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_W_DISABLE#";
+ };
+
+ /*
+ * Controls the WiFi card reset pin which is low active
+ * as reset signal. The output-low states, the signal
+ * is inactive, e.g. not in reset
+ */
+ wlan-perst-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "WLAN_PERST#";
+ };
+ };
+
+ expander2: gpio@72 {
+ compatible = "nxp,pca9538";
+ reg = <0x72>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+ "LCD_BLT_EN", "LVDS_SHDN#",
+ "FAN_PWR_EN", "",
+ "USER_LED1", "USER_LED2";
+ };
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+&pcf85063 {
+ /* RTC_EVENT# from SoM is connected on mainboard */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcf85063>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+ /* TEMP_EVENT# from SoM is connected on mainboard */
+ interrupt-parent = <&expander0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ disable-over-current;
+ status = "okay";
+
+ port {
+ typec_hs: endpoint {
+ remote-endpoint = <&typec_con_hs>;
+ };
+ };
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ disable-over-current;
+ status = "okay";
+
+ hub_2_0: hub@1 {
+ compatible = "usb424,2517";
+ reg = <1>;
+ reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+ vdd-supply = <®_3v3>;
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ disable-wp;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = /* PD | FSEL_2 | DSE X4 */
+ <MX91_PAD_ENET1_MDC__ENET1_MDC 0x51e>,
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ <MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e>,
+ /* HYS | FSEL_0 | DSE no drive */
+ <MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000>,
+ <MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000>,
+ <MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000>,
+ <MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000>,
+ <MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000>,
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ <MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x1400>,
+ /* PD | FSEL_2 | DSE X4 */
+ <MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e>,
+ <MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x51e>,
+ <MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e>,
+ <MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e>,
+ <MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e>,
+ /* PD | FSEL_3 | DSE X3 */
+ <MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e>;
+ };
+
+ pinctrl_eqos_phy: eqosphygrp {
+ fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+ <MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x1000>;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = /* PD | FSEL_2 | DSE X4 */
+ <MX91_PAD_ENET2_MDC__ENET2_MDC 0x51e>,
+ /* SION | HYS | FSEL_2 | DSE X4 */
+ <MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x4000111e>,
+ /* HYS | FSEL_0 | DSE no drive */
+ <MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x1000>,
+ <MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x1000>,
+ <MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x1000>,
+ <MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x1000>,
+ <MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x1000>,
+ /* HYS | PD | FSEL_0 | DSE no drive */
+ <MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x1400>,
+ /* PD | FSEL_2 | DSE X4 */
+ <MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x51e>,
+ <MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x51e>,
+ <MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x51e>,
+ <MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x51e>,
+ <MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x51e>,
+ /* PD | FSEL_3 | DSE X3 */
+ <MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x58e>;
+ };
+
+ pinctrl_fec_phy: fecphygrp {
+ fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+ <MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x1000>;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+ <MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200>,
+ /* PU | FSEL_3 | DSE X4 */
+ <MX91_PAD_PDM_CLK__CAN1_TX 0x039e>;
+ };
+
+ pinctrl_jtag: jtaggrp {
+ fsl,pins = <MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e>,
+ <MX91_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200>,
+ <MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e>,
+ <MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200>;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+ <MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e>,
+ <MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e>;
+ };
+
+ pinctrl_pcf85063: pcf85063grp {
+ fsl,pins = <MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x1000>;
+ };
+
+ pinctrl_pexp_irq: pexpirqgrp {
+ fsl,pins = /* HYS | FSEL_0 | No DSE */
+ <MX91_PAD_SAI1_TXC__GPIO1_IO12 0x1000>;
+ };
+
+ pinctrl_rgbdisp: rgbdispgrp {
+ fsl,pins = <MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e>,
+ <MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e>,
+ <MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e>,
+ <MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e>,
+ <MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 0x31e>,
+ <MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 0x31e>,
+ <MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 0x31e>,
+ <MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 0x31e>,
+ <MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 0x31e>,
+ <MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 0x31e>,
+ <MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 0x31e>,
+ <MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 0x31e>,
+ <MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 0x31e>,
+ <MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 0x31e>,
+ <MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e>,
+ <MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e>,
+ <MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e>,
+ <MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e>,
+ <MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e>,
+ <MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e>,
+ <MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e>,
+ <MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e>,
+ <MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x31e>,
+ <MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x31e>,
+ <MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x31e>,
+ <MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x31e>,
+ <MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x31e>,
+ <MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x31e>;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = /* HYS | FSEL_0 | No DSE */
+ <MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x1000>;
+ };
+
+ pinctrl_tpm2: tpm2grp {
+ fsl,pins = <MX91_PAD_I2C2_SCL__TPM2_CH2 0x57e>;
+ };
+
+ pinctrl_typec: typecgrp {
+ fsl,pins = /* HYS | FSEL_0 | No DSE */
+ <MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x1000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = /* HYS | FSEL_0 | No DSE */
+ <MX91_PAD_UART1_RXD__LPUART1_RX 0x1000>,
+ /* FSEL_2 | DSE X4 */
+ <MX91_PAD_UART1_TXD__LPUART1_TX 0x011e>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = /* HYS | FSEL_0 | No DSE */
+ <MX91_PAD_UART2_RXD__LPUART2_RX 0x1000>,
+ /* FSEL_2 | DSE X4 */
+ <MX91_PAD_UART2_TXD__LPUART2_TX 0x011e>,
+ /* FSEL_2 | DSE X4 */
+ <MX91_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e>;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = /* HYS | FSEL_0 | No DSE */
+ <MX91_PAD_SD2_CD_B__GPIO3_IO0 0x1000>;
+ };
+
+ /* enable SION for data and cmd pad due to ERR052021 */
+ pinctrl_usdhc2_hs: usdhc2hsgrp {
+ fsl,pins = /* PD | FSEL_3 | DSE X5 */
+ <MX91_PAD_SD2_CLK__USDHC2_CLK 0x05be>,
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ <MX91_PAD_SD2_CMD__USDHC2_CMD 0x4000139e>,
+ /* HYS | PU | FSEL_3 | DSE X3 */
+ <MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e>,
+ <MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e>,
+ <MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e>,
+ <MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e>,
+ /* FSEL_2 | DSE X3 */
+ <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e>;
+ };
+
+ /* enable SION for data and cmd pad due to ERR052021 */
+ pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+ fsl,pins = /* PD | FSEL_3 | DSE X6 */
+ <MX91_PAD_SD2_CLK__USDHC2_CLK 0x05fe>,
+ /* HYS | PU | FSEL_3 | DSE X4 */
+ <MX91_PAD_SD2_CMD__USDHC2_CMD 0x4000139e>,
+ <MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e>,
+ <MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e>,
+ <MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e>,
+ <MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e>,
+ /* FSEL_2 | DSE X3 */
+ <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
new file mode 100644
index 0000000..5792952
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+#include "imx91.dtsi"
+
+/{
+ model = "TQ-Systems i.MX91 TQMa91xxCA / TQMa91xxLA SOM";
+ compatible = "tq,imx91-tqma9131", "fsl,imx91";
+
+ memory@80000000 {
+ device_type = "memory";
+ /* our minimum RAM config will be 1024 MiB */
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* default CMA, must not exceed assembled memory */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ alloc-ranges = <0 0x80000000 0 0x40000000>;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+
+ /* EdgeLock secure enclave */
+ ele_reserved: ele-reserved@a4120000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa4120000 0 0x100000>;
+ no-map;
+ };
+ };
+
+ /* SD2 RST# via PMIC SW_EN */
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&buck4>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ vref-supply = <&buck5>;
+};
+
+&flexspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi1>;
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ /*
+ * no DQS, RXCLKSRC internal loop back, max 66 MHz
+ * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+ * selected value together with root from
+ * IMX91_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+ * respect the maximum value.
+ */
+ spi-max-frequency = <62000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ vcc-supply = <&buck5>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-1 = <&pinctrl_lpi2c1>;
+ status = "okay";
+
+ se97_som: temperature-sensor@1b {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x1b>;
+ };
+
+ pca9451a: pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9451>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ /* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* V_DDRQ - 1.1 V for LPDDR4 */
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* V_3V3 - EEPROM, RTC, ... */
+ buck4: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+ buck5: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V1 - RAM VDD2*/
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8_BBSM, fix 1.8 */
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_0V8_ANA */
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pcf85063: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ quartz-load-femtofarads = <7000>;
+ };
+
+ eeprom0: eeprom@53 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ read-only;
+ vcc-supply = <&buck4>;
+ };
+
+ eeprom1: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ vcc-supply = <&buck4>;
+ };
+
+ /* protectable identification memory (part of M24C64-D @57) */
+ eeprom@5f {
+ compatible = "atmel,24c64d-wl";
+ reg = <0x5f>;
+ vcc-supply = <&buck4>;
+ };
+
+ accelerometer@6a {
+ compatible = "st,ism330dhcx";
+ reg = <0x6a>;
+ vdd-supply = <&buck4>;
+ vddio-supply = <&buck4>;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1>;
+ vmmc-supply = <&buck4>;
+ vqmmc-supply = <&buck5>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&wdog3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_flexspi1: flexspi1grp {
+ fsl,pins = /* FSEL 3 | DSE X6 */
+ <MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x01fe>,
+ <MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x01fe>,
+ /* HYS | PU | FSEL 3 | DSE X6 */
+ <MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0 0x13fe>,
+ <MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1 0x13fe>,
+ /* HYS | FSEL 3 | DSE X6 (external PU) */
+ <MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2 0x11fe>,
+ <MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3 0x11fe>;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = /* SION | OD | FSEL 3 | DSE X4 */
+ <MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x4000199e>,
+ <MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x4000199e>;
+ };
+
+ pinctrl_pca9451: pca9451grp {
+ fsl,pins = /* HYS | PU */
+ <MX91_PAD_I2C2_SDA__GPIO1_IO3 0x1200>;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = /* FSEL 2 | DSE X2 */
+ <MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x106>;
+ };
+
+ /* enable SION for data and cmd pad due to ERR052021 */
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = /* PD | FSEL 3 | DSE X5 */
+ <MX91_PAD_SD1_CLK__USDHC1_CLK 0x5be>,
+ /* HYS | FSEL 0 | no drive */
+ <MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x1000>,
+ /* HYS | FSEL 3 | X5 */
+ <MX91_PAD_SD1_CMD__USDHC1_CMD 0x400011be>,
+ /* HYS | FSEL 3 | X4 */
+ <MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x4000119e>,
+ <MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x4000119e>,
+ <MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x4000119e>,
+ <MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x4000119e>,
+ <MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x4000119e>,
+ <MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x4000119e>,
+ <MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x4000119e>,
+ <MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x4000119e>;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = /* PU | FSEL 1 | DSE X4 */
+ <MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
new file mode 100644
index 0000000..4d8300b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx91-pinfunc.h"
+#include "imx91_93_common.dtsi"
+
+&clk {
+ compatible = "fsl,imx91-ccm";
+};
+
+&ddr_pmu {
+ compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
+};
+
+&eqos {
+ clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+ <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
+ assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+ assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&fec {
+ clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+ <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+ <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET2_REGULAR>,
+ <&clk IMX93_CLK_DUMMY>;
+ assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET2_REGULAR>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+ assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&i3c1 {
+ clocks = <&clk IMX93_CLK_BUS_AON>,
+ <&clk IMX93_CLK_I3C1_GATE>,
+ <&clk IMX93_CLK_DUMMY>;
+};
+
+&i3c2 {
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_I3C2_GATE>,
+ <&clk IMX93_CLK_DUMMY>;
+};
+
+&iomuxc {
+ compatible = "fsl,imx91-iomuxc";
+};
+
+&media_blk_ctrl {
+ compatible = "fsl,imx91-media-blk-ctrl", "syscon";
+ clocks = <&clk IMX93_CLK_MEDIA_APB>,
+ <&clk IMX93_CLK_MEDIA_AXI>,
+ <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+ <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+ <&clk IMX93_CLK_CAM_PIX>,
+ <&clk IMX93_CLK_LCDIF_GATE>,
+ <&clk IMX93_CLK_ISI_GATE>,
+ <&clk IMX93_CLK_MIPI_CSI_GATE>;
+ clock-names = "apb", "axi", "nic", "disp", "cam",
+ "lcdif", "isi", "csi";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
new file mode 100644
index 0000000..52da571
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -0,0 +1,1187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022,2025 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ idle-states {
+ entry-method = "psci";
+
+ cpu_pd_wait: cpu-pd-wait {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010033>;
+ local-timer-stop;
+ entry-latency-us = <10000>;
+ exit-latency-us = <7000>;
+ min-residency-us = <27000>;
+ wakeup-latency-us = <15000>;
+ };
+ };
+
+ A55_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
+ };
+ };
+
+ osc_32k: clock-osc-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc_32k";
+ };
+
+ osc_24m: clock-osc-24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc_24m";
+ };
+
+ clk_ext1: clock-ext1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext1";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,no-tick-in-suspend;
+ interrupt-parent = <&gic>;
+ };
+
+ gic: interrupt-controller@48000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x48000000 0 0x10000>,
+ <0 0x48040000 0 0xc0000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ };
+
+ mqs1: mqs1 {
+ compatible = "fsl,imx93-mqs";
+ gpr = <&aonmix_ns_gpr>;
+ status = "disabled";
+ };
+
+ mqs2: mqs2 {
+ compatible = "fsl,imx93-mqs";
+ gpr = <&wakeupmix_gpr>;
+ status = "disabled";
+ };
+
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+ clock-names = "main_clk";
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+ clock-names = "main_clk";
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x80000000>,
+ <0x28000000 0x0 0x28000000 0x10000000>;
+
+ aips1: bus@44000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x44000000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ edma1: dma-controller@44000000 {
+ compatible = "fsl,imx93-edma3";
+ reg = <0x44000000 0x200000>;
+ #dma-cells = <3>;
+ dma-channels = <31>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, // 0: Reserved
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, // 1: CANFD1
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, // 2: Reserved
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, // 3: GPIO1 CH0
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, // 4: GPIO1 CH1
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, // 5: I3C1 TO Bus
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, // 6: I3C1 From Bus
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, // 7: LPI2C1 M TX
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, // 8: LPI2C1 S TX
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, // 9: LPI2C2 M RX
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; // err
+ clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+ clock-names = "dma";
+ };
+
+ aonmix_ns_gpr: syscon@44210000 {
+ compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+ reg = <0x44210000 0x1000>;
+ };
+
+ system_counter: timer@44290000 {
+ compatible = "nxp,sysctr-timer";
+ reg = <0x44290000 0x30000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc_24m>;
+ clock-names = "per";
+ nxp,no-divider;
+ };
+
+ wdog1: watchdog@442d0000 {
+ compatible = "fsl,imx93-wdt";
+ reg = <0x442d0000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_WDOG1_GATE>;
+ timeout-sec = <40>;
+ status = "disabled";
+ };
+
+ wdog2: watchdog@442e0000 {
+ compatible = "fsl,imx93-wdt";
+ reg = <0x442e0000 0x10000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_WDOG2_GATE>;
+ timeout-sec = <40>;
+ status = "disabled";
+ };
+
+ tpm1: pwm@44310000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x44310000 0x1000>;
+ clocks = <&clk IMX93_CLK_TPM1_GATE>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ tpm2: pwm@44320000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x44320000 0x10000>;
+ clocks = <&clk IMX93_CLK_TPM2_GATE>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ i3c1: i3c@44330000 {
+ compatible = "silvaco,i3c-master-v1";
+ reg = <0x44330000 0x10000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ clocks = <&clk IMX93_CLK_BUS_AON>,
+ <&clk IMX93_CLK_I3C1_GATE>,
+ <&clk IMX93_CLK_I3C1_SLOW>;
+ clock-names = "pclk", "fast_clk", "slow_clk";
+ status = "disabled";
+ };
+
+ lpi2c1: i2c@44340000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x44340000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+ <&clk IMX93_CLK_BUS_AON>;
+ clock-names = "per", "ipg";
+ dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpi2c2: i2c@44350000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x44350000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+ <&clk IMX93_CLK_BUS_AON>;
+ clock-names = "per", "ipg";
+ dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi1: spi@44360000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x44360000 0x10000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+ <&clk IMX93_CLK_BUS_AON>;
+ clock-names = "per", "ipg";
+ dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi2: spi@44370000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x44370000 0x10000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+ <&clk IMX93_CLK_BUS_AON>;
+ clock-names = "per", "ipg";
+ dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpuart1: serial@44380000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x44380000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lpuart2: serial@44390000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x44390000 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ flexcan1: can@443a0000 {
+ compatible = "fsl,imx93-flexcan";
+ reg = <0x443a0000 0x10000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_BUS_AON>,
+ <&clk IMX93_CLK_CAN1_GATE>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX93_CLK_CAN1>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
+ status = "disabled";
+ };
+
+ sai1: sai@443b0000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x443b0000 0x10000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
+ dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ iomuxc: pinctrl@443c0000 {
+ compatible = "fsl,imx93-iomuxc";
+ reg = <0x443c0000 0x10000>;
+ status = "okay";
+ };
+
+ bbnsm: bbnsm@44440000 {
+ compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+ reg = <0x44440000 0x10000>;
+
+ bbnsm_rtc: rtc {
+ compatible = "nxp,imx93-bbnsm-rtc";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ bbnsm_pwrkey: pwrkey {
+ compatible = "nxp,imx93-bbnsm-pwrkey";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ clk: clock-controller@44450000 {
+ compatible = "fsl,imx93-ccm";
+ reg = <0x44450000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+ clock-names = "osc_32k", "osc_24m", "clk_ext1";
+ assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <393216000>;
+ status = "okay";
+ };
+
+ src: system-controller@44460000 {
+ compatible = "fsl,imx93-src", "syscon";
+ reg = <0x44460000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mediamix: power-domain@44462400 {
+ compatible = "fsl,imx93-src-slice";
+ reg = <0x44462400 0x400>, <0x44465800 0x400>;
+ #power-domain-cells = <0>;
+ clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+ <&clk IMX93_CLK_MEDIA_APB>;
+ };
+ };
+
+ clock-controller@44480000 {
+ compatible = "fsl,imx93-anatop";
+ reg = <0x44480000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ micfil: micfil@44520000 {
+ compatible = "fsl,imx93-micfil";
+ reg = <0x44520000 0x10000>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_PDM_IPG>,
+ <&clk IMX93_CLK_PDM_GATE>,
+ <&clk IMX93_CLK_AUDIO_PLL>;
+ clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+ dmas = <&edma1 29 0 5>;
+ dma-names = "rx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ adc1: adc@44530000 {
+ compatible = "nxp,imx93-adc";
+ reg = <0x44530000 0x10000>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_ADC1_GATE>;
+ clock-names = "ipg";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ aips2: bus@42000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x42000000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ edma2: dma-controller@42000000 {
+ compatible = "fsl,imx93-edma4";
+ reg = <0x42000000 0x210000>;
+ #dma-cells = <3>;
+ dma-channels = <64>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_EDMA2_GATE>;
+ clock-names = "dma";
+ };
+
+ wakeupmix_gpr: syscon@42420000 {
+ compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+ reg = <0x42420000 0x1000>;
+ };
+
+ wdog3: watchdog@42490000 {
+ compatible = "fsl,imx93-wdt";
+ reg = <0x42490000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+ timeout-sec = <40>;
+ status = "disabled";
+ };
+
+ wdog4: watchdog@424a0000 {
+ compatible = "fsl,imx93-wdt";
+ reg = <0x424a0000 0x10000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_WDOG4_GATE>;
+ timeout-sec = <40>;
+ status = "disabled";
+ };
+
+ wdog5: watchdog@424b0000 {
+ compatible = "fsl,imx93-wdt";
+ reg = <0x424b0000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_WDOG5_GATE>;
+ timeout-sec = <40>;
+ status = "disabled";
+ };
+
+ tpm3: pwm@424e0000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x424e0000 0x1000>;
+ clocks = <&clk IMX93_CLK_TPM3_GATE>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ tpm4: pwm@424f0000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x424f0000 0x10000>;
+ clocks = <&clk IMX93_CLK_TPM4_GATE>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ tpm5: pwm@42500000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x42500000 0x10000>;
+ clocks = <&clk IMX93_CLK_TPM5_GATE>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ tpm6: pwm@42510000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x42510000 0x10000>;
+ clocks = <&clk IMX93_CLK_TPM6_GATE>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ i3c2: i3c@42520000 {
+ compatible = "silvaco,i3c-master-v1";
+ reg = <0x42520000 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_I3C2_GATE>,
+ <&clk IMX93_CLK_I3C2_SLOW>;
+ clock-names = "pclk", "fast_clk", "slow_clk";
+ status = "disabled";
+ };
+
+ lpi2c3: i2c@42530000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x42530000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpi2c4: i2c@42540000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x42540000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi3: spi@42550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x42550000 0x10000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi4: spi@42560000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x42560000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpuart3: serial@42570000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42570000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lpuart4: serial@42580000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42580000 0x1000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lpuart5: serial@42590000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42590000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lpuart6: serial@425a0000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x425a0000 0x1000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ flexcan2: can@425b0000 {
+ compatible = "fsl,imx93-flexcan";
+ reg = <0x425b0000 0x10000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_CAN2_GATE>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX93_CLK_CAN2>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <40000000>;
+ fsl,clk-source = /bits/ 8 <0>;
+ fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
+ status = "disabled";
+ };
+
+ flexspi1: spi@425e0000 {
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+ <&clk IMX93_CLK_FLEXSPI1_GATE>;
+ clock-names = "fspi_en", "fspi";
+ assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+ status = "disabled";
+ };
+
+ sai2: sai@42650000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x42650000 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+ dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ sai3: sai@42660000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x42660000 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+ dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ xcvr: xcvr@42680000 {
+ compatible = "fsl,imx93-xcvr";
+ reg = <0x42680000 0x800>,
+ <0x42680800 0x400>,
+ <0x42680c00 0x080>,
+ <0x42680e00 0x080>;
+ reg-names = "ram", "regs", "rxfifo", "txfifo";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SPDIF_IPG>,
+ <&clk IMX93_CLK_SPDIF_GATE>,
+ <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_AUD_XCVR_GATE>;
+ clock-names = "ipg", "phy", "spba", "pll_ipg";
+ dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
+ dma-names = "rx", "tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ lpuart7: serial@42690000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x42690000 0x1000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lpuart8: serial@426a0000 {
+ compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x426a0000 0x1000>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+ clock-names = "ipg";
+ dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lpi2c5: i2c@426b0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426b0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpi2c6: i2c@426c0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426c0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpi2c7: i2c@426d0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426d0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpi2c8: i2c@426e0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426e0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi5: spi@426f0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x426f0000 0x10000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi6: spi@42700000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x42700000 0x10000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi7: spi@42710000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x42710000 0x10000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ lpspi8: spi@42720000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+ reg = <0x42720000 0x10000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ };
+
+ aips3: bus@42800000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x42800000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usdhc1: mmc@42850000 {
+ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x42850000 0x10000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_WAKEUP_AXI>,
+ <&clk IMX93_CLK_USDHC1_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-start-tap = <1>;
+ fsl,tuning-step = <2>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@42860000 {
+ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x42860000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_WAKEUP_AXI>,
+ <&clk IMX93_CLK_USDHC2_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <4>;
+ fsl,tuning-start-tap = <1>;
+ fsl,tuning-step = <2>;
+ status = "disabled";
+ };
+
+ fec: ethernet@42890000 {
+ compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+ reg = <0x42890000 0x10000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_ENET1_GATE>,
+ <&clk IMX93_CLK_ENET1_GATE>,
+ <&clk IMX93_CLK_ENET_TIMER1>,
+ <&clk IMX93_CLK_ENET_REF>,
+ <&clk IMX93_CLK_ENET_REF_PHY>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+ <&clk IMX93_CLK_ENET_REF>,
+ <&clk IMX93_CLK_ENET_REF_PHY>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <100000000>, <250000000>, <50000000>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
+ fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+ nvmem-cells = <ð_mac1>;
+ nvmem-cell-names = "mac-address";
+ status = "disabled";
+ };
+
+ eqos: ethernet@428a0000 {
+ compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+ reg = <0x428a0000 0x10000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+ <&clk IMX93_CLK_ENET_QOS_GATE>,
+ <&clk IMX93_CLK_ENET_TIMER2>,
+ <&clk IMX93_CLK_ENET>,
+ <&clk IMX93_CLK_ENET_QOS_GATE>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+ assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+ <&clk IMX93_CLK_ENET>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+ assigned-clock-rates = <100000000>, <250000000>;
+ intf_mode = <&wakeupmix_gpr 0x28>;
+ snps,clk-csr = <6>;
+ nvmem-cells = <ð_mac2>;
+ nvmem-cell-names = "mac-address";
+ status = "disabled";
+ };
+
+ usdhc3: mmc@428b0000 {
+ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x428b0000 0x10000>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_WAKEUP_AXI>,
+ <&clk IMX93_CLK_USDHC3_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <4>;
+ fsl,tuning-start-tap = <1>;
+ fsl,tuning-step = <2>;
+ status = "disabled";
+ };
+ };
+
+ gpio2: gpio@43810000 {
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x43810000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+ <&clk IMX93_CLK_GPIO2_GATE>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc 0 4 30>;
+ ngpios = <30>;
+ };
+
+ gpio3: gpio@43820000 {
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x43820000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+ <&clk IMX93_CLK_GPIO3_GATE>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+ <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+ ngpios = <32>;
+ };
+
+ gpio4: gpio@43830000 {
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x43830000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+ <&clk IMX93_CLK_GPIO4_GATE>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+ ngpios = <30>;
+ };
+
+ gpio1: gpio@47400000 {
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x47400000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+ <&clk IMX93_CLK_GPIO1_GATE>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc 0 92 16>;
+ ngpios = <16>;
+ };
+
+ ocotp: efuse@47510000 {
+ compatible = "fsl,imx93-ocotp", "syscon";
+ reg = <0x47510000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth_mac1: mac-address@4ec {
+ reg = <0x4ec 0x6>;
+ };
+
+ eth_mac2: mac-address@4f2 {
+ reg = <0x4f2 0x6>;
+ };
+
+ };
+
+ s4muap: mailbox@47520000 {
+ compatible = "fsl,imx93-mu-s4";
+ reg = <0x47520000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ #mbox-cells = <2>;
+ };
+
+ media_blk_ctrl: system-controller@4ac10000 {
+ compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+ reg = <0x4ac10000 0x10000>;
+ power-domains = <&mediamix>;
+ clocks = <&clk IMX93_CLK_MEDIA_APB>,
+ <&clk IMX93_CLK_MEDIA_AXI>,
+ <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+ <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+ <&clk IMX93_CLK_CAM_PIX>,
+ <&clk IMX93_CLK_PXP_GATE>,
+ <&clk IMX93_CLK_LCDIF_GATE>,
+ <&clk IMX93_CLK_ISI_GATE>,
+ <&clk IMX93_CLK_MIPI_CSI_GATE>,
+ <&clk IMX93_CLK_MIPI_DSI_GATE>;
+ clock-names = "apb", "axi", "nic", "disp", "cam",
+ "pxp", "lcdif", "isi", "csi", "dsi";
+ #power-domain-cells = <1>;
+ status = "disabled";
+ };
+
+ usbotg1: usb@4c100000 {
+ compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x4c100000 0x200>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+ <&clk IMX93_CLK_HSIO_32K_GATE>;
+ clock-names = "usb_ctrl_root", "usb_wakeup";
+ assigned-clocks = <&clk IMX93_CLK_HSIO>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <133000000>;
+ phys = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@4c100200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x4c100200 0x200>;
+ #index-cells = <1>;
+ };
+
+ usbotg2: usb@4c200000 {
+ compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x4c200000 0x200>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+ <&clk IMX93_CLK_HSIO_32K_GATE>;
+ clock-names = "usb_ctrl_root", "usb_wakeup";
+ assigned-clocks = <&clk IMX93_CLK_HSIO>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+ assigned-clock-rates = <133000000>;
+ phys = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@4c200200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x4c200200 0x200>;
+ #index-cells = <1>;
+ };
+
+ memory-controller@4e300000 {
+ compatible = "nxp,imx9-memory-controller";
+ reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
+ reg-names = "ctrl", "inject";
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ };
+
+ ddr_pmu: ddr-pmu@4e300dc0 {
+ compatible = "fsl,imx93-ddr-pmu";
+ reg = <0x4e300dc0 0x200>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index e24e12f..b94a241 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -12,6 +12,25 @@ / {
model = "NXP i.MX93 11X11 EVK board";
compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ rtc0 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ };
+
chosen {
stdout-path = &lpuart1;
};
@@ -272,7 +291,6 @@ mdio {
ethphy2: ethernet-phy@2 {
reg = <2>;
- eee-broken-1000t;
reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
index c5d86b5..f9eebd27 100644
--- a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
@@ -12,6 +12,21 @@ / {
model = "NXP i.MX93 14X14 EVK board";
compatible = "fsl,imx93-14x14-evk", "fsl,imx93";
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ rtc0 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ };
+
chosen {
stdout-path = &lpuart1;
};
@@ -276,7 +291,7 @@ buck2: BUCK2 {
regulator-ramp-delay = <3125>;
};
- buck4: BUCK4{
+ buck4: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3400000>;
@@ -284,7 +299,7 @@ buck4: BUCK4{
regulator-always-on;
};
- buck5: BUCK5{
+ buck5: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index f6f8d10..0852067 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -17,6 +17,24 @@ bt_sco_codec: bt-sco-codec {
compatible = "linux,bt-sco";
};
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ rtc0 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ };
+
chosen {
stdout-path = &lpuart1;
};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
index 89e97c60..4620c07 100644
--- a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
@@ -14,6 +14,27 @@ / {
aliases {
ethernet0 = &fec;
ethernet1 = &eqos;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ serial5 = &lpuart6;
+ serial6 = &lpuart7;
+ spi0 = &lpspi1;
+ spi1 = &lpspi2;
+ spi2 = &lpspi3;
+ spi3 = &lpspi4;
+ spi4 = &lpspi5;
+ spi5 = &lpspi6;
+ spi6 = &lpspi7;
+ spi7 = &lpspi8;
};
leds {
@@ -33,7 +54,9 @@ pwm-beeper {
reg_vcc_panel: regulator-vcc-panel {
compatible = "regulator-fixed";
- gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vcc_panel>;
+ gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
@@ -135,6 +158,16 @@ &tpm6 {
};
&usbotg1 {
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+};
+
+&usbotg2 {
#address-cells = <1>;
#size-cells = <0>;
disable-over-current;
@@ -147,17 +180,15 @@ usb1@1 {
};
};
-&usbotg2 {
- adp-disable;
- hnp-disable;
- srp-disable;
- disable-over-current;
- dr_mode = "otg";
- usb-role-switch;
- status = "okay";
-};
-
&usdhc2 {
vmmc-supply = <®_vdd_3v3>;
status = "okay";
};
+
+&iomuxc {
+ pinctrl_reg_vcc_panel: regvccpanelgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO21__GPIO2_IO21 0x31e /* PWM_2 */
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
index 119a162..c79b1df 100644
--- a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
@@ -205,6 +205,9 @@ eeprom@50 {
rv3028: rtc@52 {
compatible = "microcrystal,rv3028";
reg = <0x52>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -468,6 +471,12 @@ MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e /* CARRIER_PWR_EN */
>;
};
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x31e
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x31e /* I2S_A_DATA_IN */
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
index 475913c..5599e29 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
@@ -19,14 +19,44 @@ / {
aliases {
ethernet1 = &eqos;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
rtc0 = &i2c_rtc;
rtc1 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ serial5 = &lpuart6;
+ serial6 = &lpuart7;
+ spi0 = &lpspi1;
+ spi1 = &lpspi2;
+ spi2 = &lpspi3;
+ spi3 = &lpspi4;
+ spi4 = &lpspi5;
+ spi5 = &lpspi6;
};
chosen {
stdout-path = &lpuart1;
};
+ curr_sens: current-sense {
+ compatible = "current-sense-amplifier";
+ #io-channel-cells = <0>;
+ io-channels = <&adc1 1>;
+ sense-gain-div = <2>;
+ sense-gain-mult = <50>;
+ sense-resistor-micro-ohms = <35000>;
+ };
+
flexcan1_tc: can-phy0 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
@@ -36,6 +66,11 @@ flexcan1_tc: can-phy0 {
standby-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&curr_sens 0>;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index 6f1374f..802d96b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -19,8 +19,17 @@ /{
aliases {
ethernet1 = &eqos;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
rtc0 = &i2c_rtc;
rtc1 = &bbnsm_rtc;
+ serial0 = &lpuart1;
};
chosen {
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
index c6f5aa38..3f06990 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -67,7 +67,6 @@ &fec {
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
phy-handle = <ðphy1>;
- fsl,magic-packet;
assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
<&clk IMX93_CLK_ENET_REF>,
<&clk IMX93_CLK_ENET_REF_PHY>;
@@ -85,6 +84,8 @@ mdio: mdio {
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+ reset-assert-us = <30>;
};
};
};
@@ -206,14 +207,17 @@ pinctrl_fec: fecgrp {
fsl,pins = <
MX93_PAD_ENET2_MDC__ENET1_MDC 0x50e
MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x502
- MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
- MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
- MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x5fe
+ /* the three pins below are connected to PHYs straps,
+ * that is what the pull-up/down setting is for.
+ */
+ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x37e
+ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x37e
MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x50e
MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x50e
MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x50e
MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x4000050e
+ MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
index 9dbf41c..2673d9d 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
@@ -27,8 +27,19 @@ aliases {
eeprom0 = &eeprom0;
ethernet0 = &eqos;
ethernet1 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
rtc0 = &pcf85063;
rtc1 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
};
backlight: backlight {
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 137b8ed..4760d07 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -28,8 +28,33 @@ aliases {
eeprom0 = &eeprom0;
ethernet0 = &eqos;
ethernet1 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c4 = &lpi2c5;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
rtc0 = &pcf85063;
rtc1 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ serial5 = &lpuart6;
+ serial6 = &lpuart7;
+ serial7 = &lpuart8;
+ spi0 = &lpspi1;
+ spi1 = &lpspi2;
+ spi2 = &lpspi3;
+ spi3 = &lpspi4;
+ spi4 = &lpspi5;
+ spi5 = &lpspi6;
};
backlight_lvds: backlight {
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 219f49a..8a88c98 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -28,8 +28,33 @@ aliases {
eeprom0 = &eeprom0;
ethernet0 = &eqos;
ethernet1 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c4 = &lpi2c5;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
rtc0 = &pcf85063;
rtc1 = &bbnsm_rtc;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ serial5 = &lpuart6;
+ serial6 = &lpuart7;
+ serial7 = &lpuart8;
+ spi0 = &lpspi1;
+ spi1 = &lpspi2;
+ spi2 = &lpspi3;
+ spi3 = &lpspi4;
+ spi4 = &lpspi5;
+ spi5 = &lpspi6;
};
backlight_lvds: backlight {
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
index 576d698..c789c1f 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -17,8 +17,25 @@ /{
aliases {
ethernet0 = &eqos;
ethernet1 = &fec;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c4 = &lpi2c5;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &lpuart1;
+ serial1 = &lpuart2;
+ serial2 = &lpuart3;
+ serial3 = &lpuart4;
+ serial4 = &lpuart5;
+ serial5 = &lpuart6;
};
+
chosen {
stdout-path = &lpuart1;
};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 8a7f1cd..7b27012d 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1,187 +1,15 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2022 NXP
+ * Copyright 2022,2025 NXP
*/
-#include <dt-bindings/clock/imx93-clock.h>
-#include <dt-bindings/dma/fsl-edma.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/fsl,imx93-power.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "imx91_93_common.dtsi"
-#include "imx93-pinfunc.h"
-
-/ {
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- i2c0 = &lpi2c1;
- i2c1 = &lpi2c2;
- i2c2 = &lpi2c3;
- i2c3 = &lpi2c4;
- i2c4 = &lpi2c5;
- i2c5 = &lpi2c6;
- i2c6 = &lpi2c7;
- i2c7 = &lpi2c8;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- mmc2 = &usdhc3;
- serial0 = &lpuart1;
- serial1 = &lpuart2;
- serial2 = &lpuart3;
- serial3 = &lpuart4;
- serial4 = &lpuart5;
- serial5 = &lpuart6;
- serial6 = &lpuart7;
- serial7 = &lpuart8;
- spi0 = &lpspi1;
- spi1 = &lpspi2;
- spi2 = &lpspi3;
- spi3 = &lpspi4;
- spi4 = &lpspi5;
- spi5 = &lpspi6;
- spi6 = &lpspi7;
- spi7 = &lpspi8;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- idle-states {
- entry-method = "psci";
-
- cpu_pd_wait: cpu-pd-wait {
- compatible = "arm,idle-state";
- arm,psci-suspend-param = <0x0010033>;
- local-timer-stop;
- entry-latency-us = <10000>;
- exit-latency-us = <7000>;
- min-residency-us = <27000>;
- wakeup-latency-us = <15000>;
- };
- };
-
- A55_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0>;
- enable-method = "psci";
- #cooling-cells = <2>;
- cpu-idle-states = <&cpu_pd_wait>;
- i-cache-size = <32768>;
- i-cache-line-size = <64>;
- i-cache-sets = <128>;
- d-cache-size = <32768>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l0>;
- };
-
- A55_1: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x100>;
- enable-method = "psci";
- #cooling-cells = <2>;
- cpu-idle-states = <&cpu_pd_wait>;
- i-cache-size = <32768>;
- i-cache-line-size = <64>;
- i-cache-sets = <128>;
- d-cache-size = <32768>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l1>;
- };
-
- l2_cache_l0: l2-cache-l0 {
- compatible = "cache";
- cache-size = <65536>;
- cache-line-size = <64>;
- cache-sets = <256>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_l1: l2-cache-l1 {
- compatible = "cache";
- cache-size = <65536>;
- cache-line-size = <64>;
- cache-sets = <256>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l3_cache: l3-cache {
- compatible = "cache";
- cache-size = <262144>;
- cache-line-size = <64>;
- cache-sets = <256>;
- cache-level = <3>;
- cache-unified;
- };
- };
-
- osc_32k: clock-osc-32k {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "osc_32k";
- };
-
- osc_24m: clock-osc-24m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc_24m";
- };
-
- clk_ext1: clock-ext1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <133000000>;
- clock-output-names = "clk_ext1";
- };
-
- pmu {
- compatible = "arm,cortex-a55-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
- clock-frequency = <24000000>;
- arm,no-tick-in-suspend;
- interrupt-parent = <&gic>;
- };
-
- gic: interrupt-controller@48000000 {
- compatible = "arm,gic-v3";
- reg = <0 0x48000000 0 0x10000>,
- <0 0x48040000 0 0xc0000>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
+/{
+ cm33: remoteproc-cm33 {
+ compatible = "fsl,imx93-cm33";
+ clocks = <&clk IMX93_CLK_CM33_GATE>;
+ status = "disabled";
};
thermal-zones {
@@ -215,1143 +43,119 @@ map0 {
};
};
};
+};
- cm33: remoteproc-cm33 {
- compatible = "fsl,imx93-cm33";
- clocks = <&clk IMX93_CLK_CM33_GATE>;
+&aips1 {
+ mu1: mailbox@44230000 {
+ compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+ reg = <0x44230000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+ #mbox-cells = <2>;
status = "disabled";
};
- mqs1: mqs1 {
- compatible = "fsl,imx93-mqs";
- gpr = <&aonmix_ns_gpr>;
+ tmu: tmu@44482000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x44482000 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_TMC_GATE>;
+ #thermal-sensor-cells = <1>;
+ little-endian;
+ fsl,tmu-range = <0x800000da 0x800000e9
+ 0x80000102 0x8000012a
+ 0x80000166 0x800001a7
+ 0x800001b6>;
+ fsl,tmu-calibration = <0x00000000 0x0000000e
+ 0x00000001 0x00000029
+ 0x00000002 0x00000056
+ 0x00000003 0x000000a2
+ 0x00000004 0x00000116
+ 0x00000005 0x00000195
+ 0x00000006 0x000001b2>;
+ };
+};
+
+&aips2 {
+ mu2: mailbox@42440000 {
+ compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+ reg = <0x42440000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+ #mbox-cells = <2>;
status = "disabled";
};
+};
- mqs2: mqs2 {
- compatible = "fsl,imx93-mqs";
- gpr = <&wakeupmix_gpr>;
- status = "disabled";
+&cpus {
+ A55_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l0>;
};
- usbphynop1: usbphynop1 {
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
- clock-names = "main_clk";
+ A55_1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ cpu-idle-states = <&cpu_pd_wait>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l1>;
};
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
- clock-names = "main_clk";
+ l2_cache_l0: l2-cache-l0 {
+ compatible = "cache";
+ cache-size = <65536>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
};
- soc@0 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x80000000>,
- <0x28000000 0x0 0x28000000 0x10000000>;
+ l2_cache_l1: l2-cache-l1 {
+ compatible = "cache";
+ cache-size = <65536>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
- aips1: bus@44000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- reg = <0x44000000 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ l3_cache: l3-cache {
+ compatible = "cache";
+ cache-size = <262144>;
+ cache-line-size = <64>;
+ cache-sets = <256>;
+ cache-level = <3>;
+ cache-unified;
+ };
+};
- edma1: dma-controller@44000000 {
- compatible = "fsl,imx93-edma3";
- reg = <0x44000000 0x200000>;
- #dma-cells = <3>;
- dma-channels = <31>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, // 0: Reserved
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, // 1: CANFD1
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, // 2: Reserved
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, // 3: GPIO1 CH0
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, // 4: GPIO1 CH1
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, // 5: I3C1 TO Bus
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, // 6: I3C1 From Bus
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, // 7: LPI2C1 M TX
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, // 8: LPI2C1 S TX
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, // 9: LPI2C2 M RX
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
- <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
- <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
- <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
- <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
- <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; // err
- clocks = <&clk IMX93_CLK_EDMA1_GATE>;
- clock-names = "dma";
- };
-
- aonmix_ns_gpr: syscon@44210000 {
- compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
- reg = <0x44210000 0x1000>;
- };
-
- mu1: mailbox@44230000 {
- compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
- reg = <0x44230000 0x10000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_MU1_B_GATE>;
- #mbox-cells = <2>;
- status = "disabled";
- };
-
- system_counter: timer@44290000 {
- compatible = "nxp,sysctr-timer";
- reg = <0x44290000 0x30000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc_24m>;
- clock-names = "per";
- nxp,no-divider;
- };
-
- wdog1: watchdog@442d0000 {
- compatible = "fsl,imx93-wdt";
- reg = <0x442d0000 0x10000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_WDOG1_GATE>;
- timeout-sec = <40>;
- status = "disabled";
- };
-
- wdog2: watchdog@442e0000 {
- compatible = "fsl,imx93-wdt";
- reg = <0x442e0000 0x10000>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_WDOG2_GATE>;
- timeout-sec = <40>;
- status = "disabled";
- };
-
- tpm1: pwm@44310000 {
- compatible = "fsl,imx7ulp-pwm";
- reg = <0x44310000 0x1000>;
- clocks = <&clk IMX93_CLK_TPM1_GATE>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- tpm2: pwm@44320000 {
- compatible = "fsl,imx7ulp-pwm";
- reg = <0x44320000 0x10000>;
- clocks = <&clk IMX93_CLK_TPM2_GATE>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- i3c1: i3c@44330000 {
- compatible = "silvaco,i3c-master-v1";
- reg = <0x44330000 0x10000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <3>;
- #size-cells = <0>;
- clocks = <&clk IMX93_CLK_BUS_AON>,
- <&clk IMX93_CLK_I3C1_GATE>,
- <&clk IMX93_CLK_I3C1_SLOW>;
- clock-names = "pclk", "fast_clk", "slow_clk";
- status = "disabled";
- };
-
- lpi2c1: i2c@44340000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x44340000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
- <&clk IMX93_CLK_BUS_AON>;
- clock-names = "per", "ipg";
- dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpi2c2: i2c@44350000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x44350000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
- <&clk IMX93_CLK_BUS_AON>;
- clock-names = "per", "ipg";
- dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi1: spi@44360000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x44360000 0x10000>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
- <&clk IMX93_CLK_BUS_AON>;
- clock-names = "per", "ipg";
- dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi2: spi@44370000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x44370000 0x10000>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
- <&clk IMX93_CLK_BUS_AON>;
- clock-names = "per", "ipg";
- dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpuart1: serial@44380000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x44380000 0x1000>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART1_GATE>;
- clock-names = "ipg";
- dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- lpuart2: serial@44390000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x44390000 0x1000>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART2_GATE>;
- clock-names = "ipg";
- dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- flexcan1: can@443a0000 {
- compatible = "fsl,imx93-flexcan";
- reg = <0x443a0000 0x10000>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_BUS_AON>,
- <&clk IMX93_CLK_CAN1_GATE>;
- clock-names = "ipg", "per";
- assigned-clocks = <&clk IMX93_CLK_CAN1>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
- assigned-clock-rates = <40000000>;
- fsl,clk-source = /bits/ 8 <0>;
- fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
- status = "disabled";
- };
-
- sai1: sai@443b0000 {
- compatible = "fsl,imx93-sai";
- reg = <0x443b0000 0x10000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_DUMMY>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
- dma-names = "rx", "tx";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- iomuxc: pinctrl@443c0000 {
- compatible = "fsl,imx93-iomuxc";
- reg = <0x443c0000 0x10000>;
- status = "okay";
- };
-
- bbnsm: bbnsm@44440000 {
- compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
- reg = <0x44440000 0x10000>;
-
- bbnsm_rtc: rtc {
- compatible = "nxp,imx93-bbnsm-rtc";
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- bbnsm_pwrkey: pwrkey {
- compatible = "nxp,imx93-bbnsm-pwrkey";
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- linux,code = <KEY_POWER>;
- };
- };
-
- clk: clock-controller@44450000 {
- compatible = "fsl,imx93-ccm";
- reg = <0x44450000 0x10000>;
- #clock-cells = <1>;
- clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
- clock-names = "osc_32k", "osc_24m", "clk_ext1";
- assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
- assigned-clock-rates = <393216000>;
- status = "okay";
- };
-
- src: system-controller@44460000 {
- compatible = "fsl,imx93-src", "syscon";
- reg = <0x44460000 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mlmix: power-domain@44461800 {
- compatible = "fsl,imx93-src-slice";
- reg = <0x44461800 0x400>, <0x44464800 0x400>;
- #power-domain-cells = <0>;
- clocks = <&clk IMX93_CLK_ML_APB>,
- <&clk IMX93_CLK_ML>;
- };
-
- mediamix: power-domain@44462400 {
- compatible = "fsl,imx93-src-slice";
- reg = <0x44462400 0x400>, <0x44465800 0x400>;
- #power-domain-cells = <0>;
- clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
- <&clk IMX93_CLK_MEDIA_APB>;
- };
- };
-
- clock-controller@44480000 {
- compatible = "fsl,imx93-anatop";
- reg = <0x44480000 0x2000>;
- #clock-cells = <1>;
- };
-
- tmu: tmu@44482000 {
- compatible = "fsl,qoriq-tmu";
- reg = <0x44482000 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_TMC_GATE>;
- little-endian;
- fsl,tmu-range = <0x800000da 0x800000e9
- 0x80000102 0x8000012a
- 0x80000166 0x800001a7
- 0x800001b6>;
- fsl,tmu-calibration = <0x00000000 0x0000000e
- 0x00000001 0x00000029
- 0x00000002 0x00000056
- 0x00000003 0x000000a2
- 0x00000004 0x00000116
- 0x00000005 0x00000195
- 0x00000006 0x000001b2>;
- #thermal-sensor-cells = <1>;
- };
-
- micfil: micfil@44520000 {
- compatible = "fsl,imx93-micfil";
- reg = <0x44520000 0x10000>;
- interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_PDM_IPG>,
- <&clk IMX93_CLK_PDM_GATE>,
- <&clk IMX93_CLK_AUDIO_PLL>;
- clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
- dmas = <&edma1 29 0 5>;
- dma-names = "rx";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- adc1: adc@44530000 {
- compatible = "nxp,imx93-adc";
- reg = <0x44530000 0x10000>;
- interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_ADC1_GATE>;
- clock-names = "ipg";
- #io-channel-cells = <1>;
- status = "disabled";
- };
- };
-
- aips2: bus@42000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- reg = <0x42000000 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- edma2: dma-controller@42000000 {
- compatible = "fsl,imx93-edma4";
- reg = <0x42000000 0x210000>;
- #dma-cells = <3>;
- dma-channels = <64>;
- interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_EDMA2_GATE>;
- clock-names = "dma";
- };
-
- wakeupmix_gpr: syscon@42420000 {
- compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
- reg = <0x42420000 0x1000>;
- };
-
- mu2: mailbox@42440000 {
- compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
- reg = <0x42440000 0x10000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_MU2_B_GATE>;
- #mbox-cells = <2>;
- status = "disabled";
- };
-
- wdog3: watchdog@42490000 {
- compatible = "fsl,imx93-wdt";
- reg = <0x42490000 0x10000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_WDOG3_GATE>;
- timeout-sec = <40>;
- status = "disabled";
- };
-
- wdog4: watchdog@424a0000 {
- compatible = "fsl,imx93-wdt";
- reg = <0x424a0000 0x10000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_WDOG4_GATE>;
- timeout-sec = <40>;
- status = "disabled";
- };
-
- wdog5: watchdog@424b0000 {
- compatible = "fsl,imx93-wdt";
- reg = <0x424b0000 0x10000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_WDOG5_GATE>;
- timeout-sec = <40>;
- status = "disabled";
- };
-
- tpm3: pwm@424e0000 {
- compatible = "fsl,imx7ulp-pwm";
- reg = <0x424e0000 0x1000>;
- clocks = <&clk IMX93_CLK_TPM3_GATE>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- tpm4: pwm@424f0000 {
- compatible = "fsl,imx7ulp-pwm";
- reg = <0x424f0000 0x10000>;
- clocks = <&clk IMX93_CLK_TPM4_GATE>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- tpm5: pwm@42500000 {
- compatible = "fsl,imx7ulp-pwm";
- reg = <0x42500000 0x10000>;
- clocks = <&clk IMX93_CLK_TPM5_GATE>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- tpm6: pwm@42510000 {
- compatible = "fsl,imx7ulp-pwm";
- reg = <0x42510000 0x10000>;
- clocks = <&clk IMX93_CLK_TPM6_GATE>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- i3c2: i3c@42520000 {
- compatible = "silvaco,i3c-master-v1";
- reg = <0x42520000 0x10000>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <3>;
- #size-cells = <0>;
- clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
- <&clk IMX93_CLK_I3C2_GATE>,
- <&clk IMX93_CLK_I3C2_SLOW>;
- clock-names = "pclk", "fast_clk", "slow_clk";
- status = "disabled";
- };
-
- lpi2c3: i2c@42530000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x42530000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpi2c4: i2c@42540000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x42540000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi3: spi@42550000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x42550000 0x10000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi4: spi@42560000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x42560000 0x10000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpuart3: serial@42570000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x42570000 0x1000>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART3_GATE>;
- clock-names = "ipg";
- dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- lpuart4: serial@42580000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x42580000 0x1000>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART4_GATE>;
- clock-names = "ipg";
- dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- lpuart5: serial@42590000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x42590000 0x1000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART5_GATE>;
- clock-names = "ipg";
- dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- lpuart6: serial@425a0000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x425a0000 0x1000>;
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART6_GATE>;
- clock-names = "ipg";
- dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- flexcan2: can@425b0000 {
- compatible = "fsl,imx93-flexcan";
- reg = <0x425b0000 0x10000>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
- <&clk IMX93_CLK_CAN2_GATE>;
- clock-names = "ipg", "per";
- assigned-clocks = <&clk IMX93_CLK_CAN2>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
- assigned-clock-rates = <40000000>;
- fsl,clk-source = /bits/ 8 <0>;
- fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
- status = "disabled";
- };
-
- flexspi1: spi@425e0000 {
- compatible = "nxp,imx8mm-fspi";
- reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
- reg-names = "fspi_base", "fspi_mmap";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
- <&clk IMX93_CLK_FLEXSPI1_GATE>;
- clock-names = "fspi_en", "fspi";
- assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
- status = "disabled";
- };
-
- sai2: sai@42650000 {
- compatible = "fsl,imx93-sai";
- reg = <0x42650000 0x10000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_DUMMY>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
- dma-names = "rx", "tx";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- sai3: sai@42660000 {
- compatible = "fsl,imx93-sai";
- reg = <0x42660000 0x10000>;
- interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_DUMMY>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
- dma-names = "rx", "tx";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- xcvr: xcvr@42680000 {
- compatible = "fsl,imx93-xcvr";
- reg = <0x42680000 0x800>,
- <0x42680800 0x400>,
- <0x42680c00 0x080>,
- <0x42680e00 0x080>;
- reg-names = "ram", "regs", "rxfifo", "txfifo";
- interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_SPDIF_IPG>,
- <&clk IMX93_CLK_SPDIF_GATE>,
- <&clk IMX93_CLK_DUMMY>,
- <&clk IMX93_CLK_AUD_XCVR_GATE>;
- clock-names = "ipg", "phy", "spba", "pll_ipg";
- dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
- dma-names = "rx", "tx";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- lpuart7: serial@42690000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x42690000 0x1000>;
- interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART7_GATE>;
- clock-names = "ipg";
- dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- lpuart8: serial@426a0000 {
- compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
- reg = <0x426a0000 0x1000>;
- interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPUART8_GATE>;
- clock-names = "ipg";
- dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- lpi2c5: i2c@426b0000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x426b0000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpi2c6: i2c@426c0000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x426c0000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpi2c7: i2c@426d0000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x426d0000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpi2c8: i2c@426e0000 {
- compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
- reg = <0x426e0000 0x10000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi5: spi@426f0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x426f0000 0x10000>;
- interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi6: spi@42700000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x42700000 0x10000>;
- interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi7: spi@42710000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x42710000 0x10000>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- lpspi8: spi@42720000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
- reg = <0x42720000 0x10000>;
- interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
- <&clk IMX93_CLK_BUS_WAKEUP>;
- clock-names = "per", "ipg";
- dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- };
-
- aips3: bus@42800000 {
- compatible = "fsl,aips-bus", "simple-bus";
- reg = <0x42800000 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- usdhc1: mmc@42850000 {
- compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
- reg = <0x42850000 0x10000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
- <&clk IMX93_CLK_WAKEUP_AXI>,
- <&clk IMX93_CLK_USDHC1_GATE>;
- clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&clk IMX93_CLK_USDHC1>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
- assigned-clock-rates = <400000000>;
- bus-width = <8>;
- fsl,tuning-start-tap = <1>;
- fsl,tuning-step = <2>;
- status = "disabled";
- };
-
- usdhc2: mmc@42860000 {
- compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
- reg = <0x42860000 0x10000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
- <&clk IMX93_CLK_WAKEUP_AXI>,
- <&clk IMX93_CLK_USDHC2_GATE>;
- clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&clk IMX93_CLK_USDHC2>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
- assigned-clock-rates = <400000000>;
- bus-width = <4>;
- fsl,tuning-start-tap = <1>;
- fsl,tuning-step = <2>;
- status = "disabled";
- };
-
- fec: ethernet@42890000 {
- compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
- reg = <0x42890000 0x10000>;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_ENET1_GATE>,
- <&clk IMX93_CLK_ENET1_GATE>,
- <&clk IMX93_CLK_ENET_TIMER1>,
- <&clk IMX93_CLK_ENET_REF>,
- <&clk IMX93_CLK_ENET_REF_PHY>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
- <&clk IMX93_CLK_ENET_REF>,
- <&clk IMX93_CLK_ENET_REF_PHY>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
- <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
- <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
- assigned-clock-rates = <100000000>, <250000000>, <50000000>;
- fsl,num-tx-queues = <3>;
- fsl,num-rx-queues = <3>;
- fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
- nvmem-cells = <ð_mac1>;
- nvmem-cell-names = "mac-address";
- status = "disabled";
- };
-
- eqos: ethernet@428a0000 {
- compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
- reg = <0x428a0000 0x10000>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq", "eth_wake_irq";
- clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
- <&clk IMX93_CLK_ENET_QOS_GATE>,
- <&clk IMX93_CLK_ENET_TIMER2>,
- <&clk IMX93_CLK_ENET>,
- <&clk IMX93_CLK_ENET_QOS_GATE>;
- clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
- assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
- <&clk IMX93_CLK_ENET>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
- <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
- assigned-clock-rates = <100000000>, <250000000>;
- intf_mode = <&wakeupmix_gpr 0x28>;
- snps,clk-csr = <6>;
- nvmem-cells = <ð_mac2>;
- nvmem-cell-names = "mac-address";
- status = "disabled";
- };
-
- usdhc3: mmc@428b0000 {
- compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
- reg = <0x428b0000 0x10000>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
- <&clk IMX93_CLK_WAKEUP_AXI>,
- <&clk IMX93_CLK_USDHC3_GATE>;
- clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&clk IMX93_CLK_USDHC3>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
- assigned-clock-rates = <400000000>;
- bus-width = <4>;
- fsl,tuning-start-tap = <1>;
- fsl,tuning-step = <2>;
- status = "disabled";
- };
- };
-
- gpio2: gpio@43810000 {
- compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
- reg = <0x43810000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&clk IMX93_CLK_GPIO2_GATE>,
- <&clk IMX93_CLK_GPIO2_GATE>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc 0 4 30>;
- ngpios = <30>;
- };
-
- gpio3: gpio@43820000 {
- compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
- reg = <0x43820000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&clk IMX93_CLK_GPIO3_GATE>,
- <&clk IMX93_CLK_GPIO3_GATE>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
- <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
- ngpios = <32>;
- };
-
- gpio4: gpio@43830000 {
- compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
- reg = <0x43830000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&clk IMX93_CLK_GPIO4_GATE>,
- <&clk IMX93_CLK_GPIO4_GATE>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
- ngpios = <30>;
- };
-
- gpio1: gpio@47400000 {
- compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
- reg = <0x47400000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&clk IMX93_CLK_GPIO1_GATE>,
- <&clk IMX93_CLK_GPIO1_GATE>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc 0 92 16>;
- ngpios = <16>;
- };
-
- ocotp: efuse@47510000 {
- compatible = "fsl,imx93-ocotp", "syscon";
- reg = <0x47510000 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- eth_mac1: mac-address@4ec {
- reg = <0x4ec 0x6>;
- };
-
- eth_mac2: mac-address@4f2 {
- reg = <0x4f2 0x6>;
- };
-
- };
-
- s4muap: mailbox@47520000 {
- compatible = "fsl,imx93-mu-s4";
- reg = <0x47520000 0x10000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx", "rx";
- #mbox-cells = <2>;
- };
-
- media_blk_ctrl: system-controller@4ac10000 {
- compatible = "fsl,imx93-media-blk-ctrl", "syscon";
- reg = <0x4ac10000 0x10000>;
- power-domains = <&mediamix>;
- clocks = <&clk IMX93_CLK_MEDIA_APB>,
- <&clk IMX93_CLK_MEDIA_AXI>,
- <&clk IMX93_CLK_NIC_MEDIA_GATE>,
- <&clk IMX93_CLK_MEDIA_DISP_PIX>,
- <&clk IMX93_CLK_CAM_PIX>,
- <&clk IMX93_CLK_PXP_GATE>,
- <&clk IMX93_CLK_LCDIF_GATE>,
- <&clk IMX93_CLK_ISI_GATE>,
- <&clk IMX93_CLK_MIPI_CSI_GATE>,
- <&clk IMX93_CLK_MIPI_DSI_GATE>;
- clock-names = "apb", "axi", "nic", "disp", "cam",
- "pxp", "lcdif", "isi", "csi", "dsi";
- #power-domain-cells = <1>;
- status = "disabled";
- };
-
- usbotg1: usb@4c100000 {
- compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
- reg = <0x4c100000 0x200>;
- interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
- <&clk IMX93_CLK_HSIO_32K_GATE>;
- clock-names = "usb_ctrl_root", "usb_wakeup";
- assigned-clocks = <&clk IMX93_CLK_HSIO>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
- assigned-clock-rates = <133000000>;
- phys = <&usbphynop1>;
- fsl,usbmisc = <&usbmisc1 0>;
- status = "disabled";
- };
-
- usbmisc1: usbmisc@4c100200 {
- compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
- "fsl,imx6q-usbmisc";
- reg = <0x4c100200 0x200>;
- #index-cells = <1>;
- };
-
- usbotg2: usb@4c200000 {
- compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
- reg = <0x4c200000 0x200>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
- <&clk IMX93_CLK_HSIO_32K_GATE>;
- clock-names = "usb_ctrl_root", "usb_wakeup";
- assigned-clocks = <&clk IMX93_CLK_HSIO>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
- assigned-clock-rates = <133000000>;
- phys = <&usbphynop2>;
- fsl,usbmisc = <&usbmisc2 0>;
- status = "disabled";
- };
-
- usbmisc2: usbmisc@4c200200 {
- compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
- "fsl,imx6q-usbmisc";
- reg = <0x4c200200 0x200>;
- #index-cells = <1>;
- };
-
- memory-controller@4e300000 {
- compatible = "nxp,imx9-memory-controller";
- reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
- reg-names = "ctrl", "inject";
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- little-endian;
- };
-
- ddr-pmu@4e300dc0 {
- compatible = "fsl,imx93-ddr-pmu";
- reg = <0x4e300dc0 0x200>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- };
+&src {
+ mlmix: power-domain@44461800 {
+ compatible = "fsl,imx93-src-slice";
+ reg = <0x44461800 0x400>, <0x44464800 0x400>;
+ clocks = <&clk IMX93_CLK_ML_APB>,
+ <&clk IMX93_CLK_ML>;
+ #power-domain-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
index 44dee2c..d4a8804 100644
--- a/arch/arm64/boot/dts/freescale/imx94.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -212,7 +212,8 @@ edma2: dma-controller@42000000 {
<&a55_irqsteer 88>, <&a55_irqsteer 89>,
<&a55_irqsteer 90>, <&a55_irqsteer 91>,
<&a55_irqsteer 92>, <&a55_irqsteer 93>,
- <&a55_irqsteer 94>, <&a55_irqsteer 95>;
+ <&a55_irqsteer 94>, <&a55_irqsteer 95>,
+ <&gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
mu10: mailbox@42430000 {
@@ -619,7 +620,8 @@ edma4: dma-controller@42df0000 {
<&a55_irqsteer 216>, <&a55_irqsteer 217>,
<&a55_irqsteer 218>, <&a55_irqsteer 219>,
<&a55_irqsteer 220>, <&a55_irqsteer 221>,
- <&a55_irqsteer 222>, <&a55_irqsteer 223>;
+ <&a55_irqsteer 222>, <&a55_irqsteer 223>,
+ <&gic GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index 46f6e0f..1482434 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -28,7 +28,24 @@ / {
aliases {
ethernet0 = &enetc_port0;
ethernet1 = &enetc_port1;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c4 = &lpi2c5;
+ i2c5 = &lpi2c6;
+ i2c6 = &lpi2c7;
+ i2c7 = &lpi2c8;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
serial0 = &lpuart1;
+ serial4 = &lpuart5;
};
bt_sco_codec: bt-sco-codec {
@@ -864,12 +881,12 @@ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
- IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe
- IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe
- IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
- IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
- IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
- IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
@@ -1082,6 +1099,7 @@ &usb3_phy {
fsl,phy-pcs-tx-swing-full-percent = <100>;
fsl,phy-tx-preemp-amp-tune-microamp = <600>;
fsl,phy-tx-vboost-level-microvolt = <1156>;
+ fsl,phy-tx-vref-tune-percent = <100>;
status = "okay";
port {
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 9d03427..9f968fe 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -40,6 +40,7 @@ aliases {
mmc0 = &usdhc1;
mmc1 = &usdhc2;
serial0 = &lpuart1;
+ serial4 = &lpuart5;
};
bt_sco_codec: audio-codec-bt-sco {
@@ -135,6 +136,13 @@ reg_m2_pwr: regulator-m2-pwr {
regulator-max-microvolt = <3300000>;
gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /*
+ * M.2 device only can be enabled(W_DISABLE1#) after all Power
+ * Rails reach their minimum operating voltage (PCI Express M.2
+ * Specification r5.1 3.1.4 Power-up Timing).
+ * Set a delay equal to the max value of Tsettle here.
+ */
+ startup-delay-us = <5000>;
};
reg_pcie0: regulator-pcie {
@@ -216,7 +224,7 @@ sound-wm8962 {
model = "wm8962-audio";
audio-cpu = <&sai3>;
audio-codec = <&wm8962>;
- hp-det-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
audio-routing = "Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"Ext Spk", "SPKOUTL",
@@ -302,6 +310,19 @@ i2c3_gpio_expander_20: gpio@20 {
reg = <0x20>;
vcc-supply = <®_3p3v>;
};
+
+ pca9632: pca9632@62 {
+ compatible = "nxp,pca9632";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led_baclklight: led@0 {
+ reg = <0>;
+ label = "backlight";
+ linux,default-trigger = "none";
+ };
+ };
};
&lpi2c4 {
@@ -622,6 +643,7 @@ &usb3_phy {
fsl,phy-pcs-tx-swing-full-percent = <100>;
fsl,phy-tx-preemp-amp-tune-microamp = <600>;
fsl,phy-tx-vboost-level-microvolt = <1156>;
+ fsl,phy-tx-vref-tune-percent = <100>;
orientation-switch;
status = "okay";
@@ -671,7 +693,7 @@ &wdog3 {
};
&scmi_iomuxc {
- pinctrl_emdio: emdiogrp{
+ pinctrl_emdio: emdiogrp {
fsl,pins = <
IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x50e
IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x90e
@@ -1037,6 +1059,79 @@ map3 {
};
};
};
+
+ pf09-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 2>;
+
+ trips {
+ pf09_alert: trip0 {
+ hysteresis = <2000>;
+ temperature = <140000>;
+ type = "passive";
+ };
+
+ pf09_crit: trip1 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+
+ pf53arm-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 4>;
+
+ cooling-maps {
+ map0 {
+ trip = <&pf5301_alert>;
+ cooling-device =
+ <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ pf5301_alert: trip0 {
+ hysteresis = <2000>;
+ temperature = <140000>;
+ type = "passive";
+ };
+
+ pf5301_crit: trip1 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+
+ pf53soc-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 3>;
+
+ trips {
+ pf5302_alert: trip0 {
+ hysteresis = <2000>;
+ temperature = <140000>;
+ type = "passive";
+ };
+
+ pf5302_crit: trip1 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
};
&tpm6 {
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 8296888..1292677 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -260,35 +260,35 @@ clk_ext1: clock-ext1 {
sai1_mclk: clock-sai-mclk1 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <0>;
+ clock-frequency = <0>;
clock-output-names = "sai1_mclk";
};
sai2_mclk: clock-sai-mclk2 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <0>;
+ clock-frequency = <0>;
clock-output-names = "sai2_mclk";
};
sai3_mclk: clock-sai-mclk3 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <0>;
+ clock-frequency = <0>;
clock-output-names = "sai3_mclk";
};
sai4_mclk: clock-sai-mclk4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <0>;
+ clock-frequency = <0>;
clock-output-names = "sai4_mclk";
};
sai5_mclk: clock-sai-mclk5 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <0>;
+ clock-frequency = <0>;
clock-output-names = "sai5_mclk";
};
@@ -351,10 +351,18 @@ scmi_iomuxc: protocol@19 {
reg = <0x19>;
};
+ scmi_lmm: protocol@80 {
+ reg = <0x80>;
+ };
+
scmi_bbm: protocol@81 {
reg = <0x81>;
};
+ scmi_cpu: protocol@82 {
+ reg = <0x82>;
+ };
+
scmi_misc: protocol@84 {
reg = <0x84>;
};
@@ -484,6 +492,110 @@ soc {
#size-cells = <2>;
ranges;
+ etm0: etm@40840000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0 0x40840000 0x0 0x10000>;
+ arm,primecell-periphid = <0xbb95d>;
+ cpu = <&A55_0>;
+ clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
+ };
+ };
+ };
+
+ funnel0: funnel {
+ /*
+ * non-configurable funnel don't show up on the AMBA
+ * bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-static-funnel";
+ status = "disabled";
+
+ in-ports {
+ port {
+ ca_funnel_in_port0: endpoint {
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ ca_funnel_out_port0: endpoint {
+ remote-endpoint = <&hugo_funnel_in_port0>;
+ };
+ };
+ };
+ };
+
+ funnel1: funnel-sys {
+ compatible = "arm,coresight-static-funnel";
+ status = "disabled";
+
+ in-ports {
+ port {
+ hugo_funnel_in_port0: endpoint {
+ remote-endpoint = <&ca_funnel_out_port0>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ hugo_funnel_out_port0: endpoint {
+ remote-endpoint = <&etf_in_port>;
+ };
+ };
+ };
+ };
+
+ etf: etf@41030000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x0 0x41030000 0x0 0x1000>;
+ clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+
+ in-ports {
+ port {
+ etf_in_port: endpoint {
+ remote-endpoint = <&hugo_funnel_out_port0>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ etf_out_port: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+ };
+ };
+
+ etr: etr@41040000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x0 0x41040000 0x0 0x1000>;
+ clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
+
aips2: bus@42000000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x0 0x42000000 0x0 0x800000>;
@@ -913,7 +1025,7 @@ lpuart7: serial@42690000 {
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART7>;
clock-names = "ipg";
- dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>;
+ dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -925,7 +1037,7 @@ lpuart8: serial@426a0000 {
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scmi_clk IMX95_CLK_LPUART8>;
clock-names = "ipg";
- dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>;
+ dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
@@ -1100,7 +1212,7 @@ usdhc1: mmc@42850000 {
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-start-tap = <1>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
@@ -1117,7 +1229,7 @@ usdhc2: mmc@42860000 {
assigned-clock-rates = <400000000>;
bus-width = <4>;
fsl,tuning-start-tap = <1>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
@@ -1134,7 +1246,7 @@ usdhc3: mmc@428b0000 {
assigned-clock-rates = <400000000>;
bus-width = <4>;
fsl,tuning-start-tap = <1>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
};
@@ -1260,6 +1372,15 @@ mu1: mailbox@44220000 {
status = "disabled";
};
+ system_counter: timer@44290000 {
+ compatible = "nxp,imx95-sysctr-timer";
+ reg = <0x44290000 0x30000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc_24m>;
+ clock-names = "per";
+ nxp,no-divider;
+ };
+
tpm1: pwm@44310000 {
compatible = "fsl,imx7ulp-pwm";
reg = <0x44310000 0x1000>;
@@ -1483,6 +1604,13 @@ mu6: mailbox@44630000 {
};
};
+ mailbox@47300000 {
+ compatible = "fsl,imx95-mu-v2x";
+ reg = <0x0 0x47300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
+
mailbox@47320000 {
compatible = "fsl,imx95-mu-v2x";
reg = <0x0 0x47320000 0x0 0x10000>;
@@ -1490,6 +1618,20 @@ mailbox@47320000 {
#mbox-cells = <2>;
};
+ mailbox@47330000 {
+ compatible = "fsl,imx95-mu-v2x";
+ reg = <0x0 0x47330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
+
+ mailbox@47340000 {
+ compatible = "fsl,imx95-mu-v2x";
+ reg = <0x0 0x47340000 0x0 0x10000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
+
mailbox@47350000 {
compatible = "fsl,imx95-mu-v2x";
reg = <0x0 0x47350000 0x0 0x10000>;
@@ -1515,6 +1657,25 @@ gpio1: gpio@47400000 {
status = "disabled";
};
+ ocotp: efuse@47510000 {
+ compatible = "fsl,imx95-ocotp", "syscon";
+ reg = <0x0 0x47510000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth_mac0: mac-address@0 {
+ reg = <0x0514 0x6>;
+ };
+
+ eth_mac1: mac-address@1 {
+ reg = <0x1514 0x6>;
+ };
+
+ eth_mac2: mac-address@2 {
+ reg = <0x2514 0x6>;
+ };
+ };
+
elemu0: mailbox@47520000 {
compatible = "fsl,imx95-mu-ele";
reg = <0x0 0x47520000 0x0 0x10000>;
@@ -1685,9 +1846,9 @@ pcie0: pcie@4c300000 {
<&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
<&hsio_blk_ctl 0>;
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
- assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
- <&scmi_clk IMX95_CLK_HSIOPLL>,
- <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
assigned-clock-parents = <0>, <0>,
<&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
@@ -1719,12 +1880,13 @@ pcie0_ep: pcie-ep@4c300000 {
<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
<&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
- assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
- <&scmi_clk IMX95_CLK_HSIOPLL>,
- <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
assigned-clock-parents = <0>, <0>,
<&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+ msi-map = <0x0 &its 0x98 0x1>;
power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
status = "disabled";
};
@@ -1759,9 +1921,9 @@ pcie1: pcie@4c380000 {
<&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
<&hsio_blk_ctl 0>;
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
- assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
- <&scmi_clk IMX95_CLK_HSIOPLL>,
- <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
assigned-clock-parents = <0>, <0>,
<&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
@@ -1795,9 +1957,9 @@ pcie1_ep: pcie-ep@4c380000 {
<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
<&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
- assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
- <&scmi_clk IMX95_CLK_HSIOPLL>,
- <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX95_CLK_HSIOPLL>,
+ <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
assigned-clock-parents = <0>, <0>,
<&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
@@ -1948,6 +2110,7 @@ enetc_port2: ethernet@10,0 {
};
netc_timer: ethernet@18,0 {
+ compatible = "pci1131,ee02";
reg = <0x00c000 0 0 0 0>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 09d2fbb..d167624 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -325,6 +325,81 @@ usdhc0-200mhz-grp4 {
};
};
+ ocotp: nvmem@400a4000 {
+ compatible = "nxp,s32g2-ocotp";
+ reg = <0x400a4000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ swt0: watchdog@40100000 {
+ compatible = "nxp,s32g2-swt";
+ reg = <0x40100000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt1: watchdog@40104000 {
+ compatible = "nxp,s32g2-swt";
+ reg = <0x40104000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt2: watchdog@40108000 {
+ compatible = "nxp,s32g2-swt";
+ reg = <0x40108000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt3: watchdog@4010c000 {
+ compatible = "nxp,s32g2-swt";
+ reg = <0x4010c000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm0: timer@4011c000 {
+ compatible = "nxp,s32g2-stm";
+ reg = <0x4011c000 0x3000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm1: timer@40120000 {
+ compatible = "nxp,s32g2-stm";
+ reg = <0x40120000 0x3000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm2: timer@40124000 {
+ compatible = "nxp,s32g2-stm";
+ reg = <0x40124000 0x3000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm3: timer@40128000 {
+ compatible = "nxp,s32g2-stm";
+ reg = <0x40128000 0x3000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
edma0: dma-controller@40144000 {
compatible = "nxp,s32g2-edma";
reg = <0x40144000 0x24000>,
@@ -479,6 +554,57 @@ i2c2: i2c@401ec000 {
status = "disabled";
};
+ swt4: watchdog@40200000 {
+ compatible = "nxp,s32g2-swt";
+ reg = <0x40200000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt5: watchdog@40204000 {
+ compatible = "nxp,s32g2-swt";
+ reg = <0x40204000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt6: watchdog@40208000 {
+ compatible = "nxp,s32g2-swt";
+ reg = <0x40208000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm4: timer@4021c000 {
+ compatible = "nxp,s32g2-stm";
+ reg = <0x4021c000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm5: timer@40220000 {
+ compatible = "nxp,s32g2-stm";
+ reg = <0x40220000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm6: timer@40224000 {
+ compatible = "nxp,s32g2-stm";
+ reg = <0x40224000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
edma1: dma-controller@40244000 {
compatible = "nxp,s32g2-edma";
reg = <0x40244000 0x24000>,
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index b5ba516..4f58be68 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -40,6 +40,26 @@ &uart1 {
status = "okay";
};
+&stm0 {
+ status = "okay";
+};
+
+&stm1 {
+ status = "okay";
+};
+
+&stm2 {
+ status = "okay";
+};
+
+&stm3 {
+ status = "okay";
+};
+
+&swt0 {
+ status = "okay";
+};
+
&usdhc0 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc0>;
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index 39effbe..be3a582 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -383,6 +383,81 @@ usdhc0-200mhz-grp4 {
};
};
+ ocotp: nvmem@400a4000 {
+ compatible = "nxp,s32g3-ocotp", "nxp,s32g2-ocotp";
+ reg = <0x400a4000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ swt0: watchdog@40100000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40100000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt1: watchdog@40104000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40104000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt2: watchdog@40108000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40108000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt3: watchdog@4010c000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x4010c000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm0: timer@4011c000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x4011c000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm1: timer@40120000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40120000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm2: timer@40124000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40124000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm3: timer@40128000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40128000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
edma0: dma-controller@40144000 {
compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
reg = <0x40144000 0x24000>,
@@ -542,6 +617,65 @@ i2c2: i2c@401ec000 {
status = "disabled";
};
+ swt4: watchdog@40200000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40200000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt5: watchdog@40204000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40204000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt6: watchdog@40208000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40208000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt7: watchdog@4020C000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x4020C000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm4: timer@4021c000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x4021c000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm5: timer@40220000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40220000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm6: timer@40224000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40224000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
edma1: dma-controller@40244000 {
compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
reg = <0x40244000 0x24000>,
@@ -670,6 +804,74 @@ usdhc0: mmc@402f0000 {
status = "disabled";
};
+ swt8: watchdog@40500000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <40500000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt9: watchdog@40504000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40504000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt10: watchdog@40508000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x40508000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ swt11: watchdog@4050c000 {
+ compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+ reg = <0x4050c000 0x1000>;
+ clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+ clock-names = "counter", "module", "register";
+ status = "disabled";
+ };
+
+ stm8: timer@40520000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40520000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm9: timer@40524000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40524000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm10: timer@40528000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x40528000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ stm11: timer@4052c000 {
+ compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+ reg = <0x4052c000 0x3000>;
+ clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+ clock-names = "counter", "module", "register";
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@50800000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
index 802f543..e94f70a 100644
--- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -40,6 +40,42 @@ &uart1 {
status = "okay";
};
+&stm0 {
+ status = "okay";
+};
+
+&stm1 {
+ status = "okay";
+};
+
+&stm2 {
+ status = "okay";
+};
+
+&stm3 {
+ status = "okay";
+};
+
+&stm4 {
+ status = "okay";
+};
+
+&stm5 {
+ status = "okay";
+};
+
+&stm6 {
+ status = "okay";
+};
+
+&stm8 {
+ status = "okay";
+};
+
+&swt0 {
+ status = "okay";
+};
+
&i2c4 {
current-sensor@40 {
compatible = "ti,ina231";
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index 7d9394a..04e99cd 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -486,5 +486,341 @@ qspi: spi@108d2000 {
clocks = <&qspi_clk>;
status = "disabled";
};
+
+ gmac0: ethernet@10810000 {
+ compatible = "altr,socfpga-stmmac-agilex5",
+ "snps,dwxgmac-2.10";
+ reg = <0x10810000 0x3500>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+ reset-names = "stmmaceth", "ahb";
+ clocks = <&clkmgr AGILEX5_EMAC0_CLK>,
+ <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
+ mac-address = [00 00 00 00 00 00];
+ tx-fifo-depth = <32768>;
+ rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <64>;
+ snps,axi-config = <&stmmac_axi_emac0_setup>;
+ snps,mtl-rx-config = <&mtl_rx_emac0_setup>;
+ snps,mtl-tx-config = <&mtl_tx_emac0_setup>;
+ snps,pbl = <32>;
+ snps,tso;
+ altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+ snps,clk-csr = <0>;
+ status = "disabled";
+
+ stmmac_axi_emac0_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <31>;
+ snps,rd_osr_lmt = <31>;
+ snps,blen = <0 0 0 32 16 8 4>;
+ };
+
+ mtl_rx_emac0_setup: rx-queues-config {
+ snps,rx-queues-to-use = <8>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ };
+ queue2 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ };
+ queue3 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ };
+ queue4 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x4>;
+ };
+ queue5 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x5>;
+ };
+ queue6 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x6>;
+ };
+ queue7 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x7>;
+ };
+ };
+
+ mtl_tx_emac0_setup: tx-queues-config {
+ snps,tx-queues-to-use = <8>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x09>;
+ snps,dcb-algorithm;
+ };
+ queue1 {
+ snps,weight = <0x0A>;
+ snps,dcb-algorithm;
+ };
+ queue2 {
+ snps,weight = <0x0B>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue3 {
+ snps,weight = <0x0C>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue4 {
+ snps,weight = <0x0D>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue5 {
+ snps,weight = <0x0E>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue6 {
+ snps,weight = <0x0F>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue7 {
+ snps,weight = <0x10>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ };
+ };
+
+ gmac1: ethernet@10820000 {
+ compatible = "altr,socfpga-stmmac-agilex5",
+ "snps,dwxgmac-2.10";
+ reg = <0x10820000 0x3500>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+ reset-names = "stmmaceth", "ahb";
+ clocks = <&clkmgr AGILEX5_EMAC1_CLK>,
+ <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
+ mac-address = [00 00 00 00 00 00];
+ tx-fifo-depth = <32768>;
+ rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <64>;
+ snps,axi-config = <&stmmac_axi_emac1_setup>;
+ snps,mtl-rx-config = <&mtl_rx_emac1_setup>;
+ snps,mtl-tx-config = <&mtl_tx_emac1_setup>;
+ snps,pbl = <32>;
+ snps,tso;
+ altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+ snps,clk-csr = <0>;
+ status = "disabled";
+
+ stmmac_axi_emac1_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <31>;
+ snps,rd_osr_lmt = <31>;
+ snps,blen = <0 0 0 32 16 8 4>;
+ };
+
+ mtl_rx_emac1_setup: rx-queues-config {
+ snps,rx-queues-to-use = <8>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ };
+ queue2 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ };
+ queue3 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ };
+ queue4 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x4>;
+ };
+ queue5 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x5>;
+ };
+ queue6 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x6>;
+ };
+ queue7 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x7>;
+ };
+ };
+
+ mtl_tx_emac1_setup: tx-queues-config {
+ snps,tx-queues-to-use = <8>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x09>;
+ snps,dcb-algorithm;
+ };
+ queue1 {
+ snps,weight = <0x0A>;
+ snps,dcb-algorithm;
+ };
+ queue2 {
+ snps,weight = <0x0B>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue3 {
+ snps,weight = <0x0C>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue4 {
+ snps,weight = <0x0D>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue5 {
+ snps,weight = <0x0E>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue6 {
+ snps,weight = <0x0F>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue7 {
+ snps,weight = <0x10>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ };
+ };
+
+ gmac2: ethernet@10830000 {
+ compatible = "altr,socfpga-stmmac-agilex5",
+ "snps,dwxgmac-2.10";
+ reg = <0x10830000 0x3500>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+ reset-names = "stmmaceth", "ahb";
+ clocks = <&clkmgr AGILEX5_EMAC2_CLK>,
+ <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+ clock-names = "stmmaceth", "ptp_ref";
+ mac-address = [00 00 00 00 00 00];
+ tx-fifo-depth = <32768>;
+ rx-fifo-depth = <16384>;
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <64>;
+ snps,axi-config = <&stmmac_axi_emac2_setup>;
+ snps,mtl-rx-config = <&mtl_rx_emac2_setup>;
+ snps,mtl-tx-config = <&mtl_tx_emac2_setup>;
+ snps,pbl = <32>;
+ snps,tso;
+ altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+ snps,clk-csr = <0>;
+ status = "disabled";
+
+ stmmac_axi_emac2_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <31>;
+ snps,rd_osr_lmt = <31>;
+ snps,blen = <0 0 0 32 16 8 4>;
+ };
+
+ mtl_rx_emac2_setup: rx-queues-config {
+ snps,rx-queues-to-use = <8>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ };
+ queue2 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ };
+ queue3 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ };
+ queue4 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x4>;
+ };
+ queue5 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x5>;
+ };
+ queue6 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x6>;
+ };
+ queue7 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x7>;
+ };
+ };
+
+ mtl_tx_emac2_setup: tx-queues-config {
+ snps,tx-queues-to-use = <8>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x09>;
+ snps,dcb-algorithm;
+ };
+ queue1 {
+ snps,weight = <0x0A>;
+ snps,dcb-algorithm;
+ };
+ queue2 {
+ snps,weight = <0x0B>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue3 {
+ snps,weight = <0x0C>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue4 {
+ snps,weight = <0x0D>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue5 {
+ snps,weight = <0x0E>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue6 {
+ snps,weight = <0x0F>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ queue7 {
+ snps,weight = <0x10>;
+ snps,coe-unsupported;
+ snps,dcb-algorithm;
+ };
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
index d3b913b..e9776e1 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -10,6 +10,9 @@ / {
aliases {
serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
};
chosen {
@@ -37,6 +40,23 @@ &gpio0 {
status = "okay";
};
+&gmac2 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&emac2_phy0>;
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ emac2_phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
&gpio1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 40e5ac6..a774bc7 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-atlas-v5.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 605f5be..4878773 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -322,7 +322,7 @@ spi1: spi@805a8000 {
nand: nand-controller@805b0000 {
compatible = "marvell,ac5-nand-controller";
- reg = <0x0 0x805b0000 0x0 0x00000054>;
+ reg = <0x0 0x805b0000 0x0 0x00000054>;
#address-cells = <0x1>;
#size-cells = <0x0>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
new file mode 100644
index 0000000..070d10a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for RIPE Atlas Probe v5
+ * 2025 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+ model = "RIPE Atlas Probe v5";
+ compatible = "ripe,atlas-v5", "marvell,armada3720",
+ "marvell,armada3710";
+
+ aliases {
+ ethernet0 = ð0;
+ mmc0 = &sdhci0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_ACTIVITY;
+ color = <LED_COLOR_ID_RED>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ vsdc_reg: vsdc-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vsdc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
+
+ firmware {
+ armada-3700-rwtm {
+ compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy1>;
+ status = "okay";
+};
+
+&sdhci0 {
+ non-removable;
+ bus-width = <4>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ sd-uhs-sdr104;
+ marvell,xenon-emmc;
+ marvell,xenon-tun-count = <9>;
+ marvell,pad-type = "fixed-1-8v";
+ vqmmc-supply = <&vsdc_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmccard: mmccard@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+};
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smi_pins>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 75b0fdc..c612317 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -524,6 +524,7 @@ pcie0: pcie@d0070000 {
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <0>;
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index a057e11..d9d409e 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -202,6 +202,7 @@ CP11X_LABEL(icu): interrupt-controller@1e0000 {
CP11X_LABEL(icu_nsr): interrupt-controller@10 {
compatible = "marvell,cp110-icu-nsr";
reg = <0x10 0x20>;
+ #address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
msi-parent = <&gicp>;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
index a997bba..f95202d 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
@@ -61,6 +61,8 @@ &ap_sdhci0 {
pinctrl-0 = <&ap_mmc0_pins>;
pinctrl-names = "default";
vqmmc-supply = <&v_1_8>;
+ no-sdio;
+ non-removable;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
index 6f237d3..5cf83d8 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -570,7 +570,7 @@ led@2 {
};
&cp2_ethernet {
- status = "okay";
+ status = "okay";
};
/* SRDS #2 - 5GE */
@@ -583,7 +583,7 @@ &cp2_eth0 {
};
&cp2_gpio1 {
- pinctrl-names= "default";
+ pinctrl-names = "default";
pinctrl-0 = <&cp2_rsvd9_pins>;
/* J21 */
diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
index bb2bb47f..91ba5f7 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -450,7 +450,7 @@ tpm@0 {
reg = <0>;
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <10000000>;
- pinctrl-names = "default";
+ pinctrl-names = "default";
pinctrl-0 = <&cp1_tpm_irq_pins>;
interrupt-parent = <&cp1_gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
index d89858c..243afbf 100644
--- a/arch/arm64/boot/dts/mediatek/mt6331.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -6,12 +6,12 @@
#include <dt-bindings/input/input.h>
&pwrap {
- pmic: mt6331 {
+ pmic: pmic {
compatible = "mediatek,mt6331";
interrupt-controller;
#interrupt-cells = <2>;
- mt6331regulator: mt6331regulator {
+ mt6331regulator: regulators {
compatible = "mediatek,mt6331-regulator";
mt6331_vdvfs11_reg: buck-vdvfs11 {
@@ -258,7 +258,7 @@ mt6331_vrtc_reg: ldo-vrtc {
};
mt6331_vdig18_reg: ldo-vdig18 {
- regulator-name = "dvdd18_dig";
+ regulator-name = "vdig18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <0>;
@@ -266,11 +266,11 @@ mt6331_vdig18_reg: ldo-vdig18 {
};
};
- mt6331rtc: mt6331rtc {
+ mt6331rtc: rtc {
compatible = "mediatek,mt6331-rtc";
};
- mt6331keys: mt6331keys {
+ mt6331keys: keys {
compatible = "mediatek,mt6331-keys";
power {
linux,keycodes = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6755.dtsi b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
index b55d3fa..8da5c0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt6755.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
@@ -98,7 +98,7 @@ timer {
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
- sysirq: intpol-controller@10200620 {
+ sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt6755-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 5c579e8..70f3375 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -138,7 +138,7 @@ ppi_cluster1: interrupt-partition-1 {
};
- sysirq: intpol-controller@c53a650 {
+ sysirq: interrupt-controller@c53a650 {
compatible = "mediatek,mt6779-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index 91de920..fccb948 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -212,7 +212,7 @@ proximity@48 {
&mmc0 {
/* eMMC controller */
- mediatek,latch-ck = <0x14>; /* hs400 */
+ mediatek,latch-ck = <4>; /* hs400 */
mediatek,hs200-cmd-int-delay = <1>;
mediatek,hs400-cmd-int-delay = <1>;
mediatek,hs400-ds-dly3 = <0x1a>;
@@ -227,6 +227,8 @@ &mmc0 {
&mmc1 {
/* MicroSD card slot */
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&mt6331_vmc_reg>;
vqmmc-supply = <&mt6331_vmch_reg>;
status = "okay";
@@ -234,6 +236,8 @@ &mmc1 {
&mmc2 {
/* SDIO WiFi on MMC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&mt6331_vmc_reg>;
vqmmc-supply = <&mt6331_vmch_reg>;
status = "okay";
@@ -311,6 +315,40 @@ pins-ds {
};
};
+ mmc1_pins_default: microsd-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
+ <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ mmc2_pins_default: sdio-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
+ <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
+ <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
+ <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
+ <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
nfc_pins: nfc-pins {
pins-irq {
pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index e5e269a..58833e5 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -404,7 +404,7 @@ pwrap: pwrap@1000d000 {
clock-names = "spi", "wrap";
};
- sysirq: intpol-controller@10200620 {
+ sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt6795-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
@@ -427,6 +427,7 @@ iommu: iommu@10205000 {
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,infracfg = <&infracfg>;
mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>;
power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
#iommu-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 0e9d11b..8ac98a37 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -135,71 +135,71 @@ pio: pinctrl@10005000 {
gpio-controller;
#gpio-cells = <2>;
- uart0_pins_a: uart0 {
- pins0 {
+ uart0_pins_a: uart0-pins {
+ pins-bus {
pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
<MT6797_GPIO235__FUNC_URXD0>;
};
};
- uart1_pins_a: uart1 {
- pins1 {
+ uart1_pins_a: uart1-pins {
+ pins-bus {
pinmux = <MT6797_GPIO232__FUNC_URXD1>,
<MT6797_GPIO233__FUNC_UTXD1>;
};
};
- i2c0_pins_a: i2c0 {
- pins0 {
+ i2c0_pins_a: i2c0-pins {
+ pins-bus {
pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
<MT6797_GPIO38__FUNC_SDA0_0>;
};
};
- i2c1_pins_a: i2c1 {
- pins1 {
+ i2c1_pins_a: i2c1-pins {
+ pins-bus {
pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
<MT6797_GPIO56__FUNC_SDA1_0>;
};
};
- i2c2_pins_a: i2c2 {
- pins2 {
+ i2c2_pins_a: i2c2-pins {
+ pins-bus {
pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
<MT6797_GPIO95__FUNC_SDA2_0>;
};
};
- i2c3_pins_a: i2c3 {
- pins3 {
+ i2c3_pins_a: i2c3-pins {
+ pins-bus {
pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
<MT6797_GPIO74__FUNC_SCL3_0>;
};
};
- i2c4_pins_a: i2c4 {
- pins4 {
+ i2c4_pins_a: i2c4-pins {
+ pins-bus {
pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
<MT6797_GPIO239__FUNC_SCL4_0>;
};
};
- i2c5_pins_a: i2c5 {
- pins5 {
+ i2c5_pins_a: i2c5-pins {
+ pins-bus {
pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
<MT6797_GPIO241__FUNC_SCL5_0>;
};
};
- i2c6_pins_a: i2c6 {
- pins6 {
+ i2c6_pins_a: i2c6-pins {
+ pins-bus {
pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
<MT6797_GPIO151__FUNC_SCL6_0>;
};
};
- i2c7_pins_a: i2c7 {
- pins7 {
+ i2c7_pins_a: i2c7-pins {
+ pins-bus {
pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
<MT6797_GPIO153__FUNC_SCL7_0>;
};
@@ -228,7 +228,7 @@ apmixedsys: apmixed@1000c000 {
#clock-cells = <1>;
};
- sysirq: intpol-controller@10200620 {
+ sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt6797-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
@@ -285,7 +285,6 @@ uart3: serial@11005000 {
i2c0: i2c@11007000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <0>;
reg = <0 0x11007000 0 0x1000>,
<0 0x11000100 0 0x80>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
@@ -301,7 +300,6 @@ i2c0: i2c@11007000 {
i2c1: i2c@11008000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <1>;
reg = <0 0x11008000 0 0x1000>,
<0 0x11000180 0 0x80>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
@@ -317,7 +315,6 @@ i2c1: i2c@11008000 {
i2c8: i2c@11009000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <8>;
reg = <0 0x11009000 0 0x1000>,
<0 0x11000200 0 0x80>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
@@ -334,7 +331,6 @@ i2c8: i2c@11009000 {
i2c9: i2c@1100d000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <9>;
reg = <0 0x1100d000 0 0x1000>,
<0 0x11000280 0 0x80>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -351,7 +347,6 @@ i2c9: i2c@1100d000 {
i2c6: i2c@1100e000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <6>;
reg = <0 0x1100e000 0 0x1000>,
<0 0x11000500 0 0x80>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
@@ -367,7 +362,6 @@ i2c6: i2c@1100e000 {
i2c7: i2c@11010000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <7>;
reg = <0 0x11010000 0 0x1000>,
<0 0x11000580 0 0x80>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
@@ -383,7 +377,6 @@ i2c7: i2c@11010000 {
i2c4: i2c@11011000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <4>;
reg = <0 0x11011000 0 0x1000>,
<0 0x11000300 0 0x80>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
@@ -399,7 +392,6 @@ i2c4: i2c@11011000 {
i2c2: i2c@11013000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <2>;
reg = <0 0x11013000 0 0x1000>,
<0 0x11000400 0 0x80>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
@@ -416,7 +408,6 @@ i2c2: i2c@11013000 {
i2c3: i2c@11014000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <3>;
reg = <0 0x11014000 0 0x1000>,
<0 0x11000480 0 0x80>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
@@ -433,7 +424,6 @@ i2c3: i2c@11014000 {
i2c5: i2c@1101c000 {
compatible = "mediatek,mt6797-i2c",
"mediatek,mt6577-i2c";
- id = <5>;
reg = <0 0x1101c000 0 0x1000>,
<0 0x11000380 0 0x80>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
index 5cbea9c..277c1124 100644
--- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -76,7 +76,7 @@ watchdog: watchdog@1001c000 {
#reset-cells = <1>;
};
- clock-controller@1001e000 {
+ apmixedsys: clock-controller@1001e000 {
compatible = "mediatek,mt7981-apmixedsys";
reg = <0 0x1001e000 0 0x1000>;
#clock-cells = <1>;
@@ -184,6 +184,31 @@ spi@1100b000 {
status = "disabled";
};
+ thermal@1100c800 {
+ compatible = "mediatek,mt7981-thermal",
+ "mediatek,mt7986-thermal";
+ reg = <0 0x1100c800 0 0x800>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_INFRA_THERM_CK>,
+ <&infracfg CLK_INFRA_ADC_26M_CK>;
+ clock-names = "therm", "auxadc";
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ };
+
+ auxadc: adc@1100d000 {
+ compatible = "mediatek,mt7981-auxadc",
+ "mediatek,mt7986-auxadc";
+ reg = <0 0x1100d000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
pio: pinctrl@11d00000 {
compatible = "mediatek,mt7981-pinctrl";
reg = <0 0x11d00000 0 0x1000>,
@@ -211,6 +236,10 @@ efuse@11f20000 {
reg = <0 0x11f20000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ thermal_calibration: thermal-calib@274 {
+ reg = <0x274 0xc>;
+ };
};
clock-controller@15000000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
index 08b3b08..30805a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -98,8 +98,6 @@ &spi0 {
flash@0 {
compatible = "spi-nand";
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
spi-max-frequency = <52000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index ed79ad1a..e7654dc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -64,23 +64,19 @@ wps-key {
};
/* i2c of the left SFP cage (wan) */
- i2c_sfp1: i2c-gpio-0 {
+ i2c_sfp1: i2c-0 {
compatible = "i2c-gpio";
sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
};
/* i2c of the right SFP cage (lan) */
- i2c_sfp2: i2c-gpio-1 {
+ i2c_sfp2: i2c-1 {
compatible = "i2c-gpio";
sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
};
leds {
@@ -204,8 +200,9 @@ switch: switch@31 {
compatible = "mediatek,mt7531";
reg = <31>;
interrupt-controller;
+ interrupt-parent = <&pio>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
- interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 559990d..a897233 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -428,16 +428,16 @@ pcie_intc: interrupt-controller {
};
};
- pcie_phy: t-phy {
+ pcie_phy: t-phy@11c00000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";
- ranges;
- #address-cells = <2>;
- #size-cells = <2>;
+ ranges = <0 0 0x11c00000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
status = "disabled";
- pcie_port: pcie-phy@11c00000 {
- reg = <0 0x11c00000 0 0x20000>;
+ pcie_port: pcie-phy@0 {
+ reg = <0 0x20000>;
clocks = <&clk40m>;
clock-names = "ref";
#phy-cells = <1>;
@@ -523,11 +523,17 @@ wed1: wed@15011000 {
eth: ethernet@15100000 {
compatible = "mediatek,mt7986-eth";
- reg = <0 0x15100000 0 0x80000>;
+ reg = <0 0x15100000 0 0x40000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+ "pdma1", "pdma2", "pdma3";
clocks = <ðsys CLK_ETH_FE_EN>,
<ðsys CLK_ETH_GP2_EN>,
<ðsys CLK_ETH_GP1_EN>,
@@ -553,6 +559,7 @@ eth: ethernet@15100000 {
<&topckgen CLK_TOP_SGM_325M_SEL>;
assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
<&apmixedsys CLK_APMIXED_SGMPLL>;
+ sram = <ð_sram>;
#address-cells = <1>;
#size-cells = <0>;
mediatek,ethsys = <ðsys>;
@@ -562,6 +569,15 @@ eth: ethernet@15100000 {
status = "disabled";
};
+ /*15100000+0x40000*/
+ eth_sram: sram@15140000 {
+ compatible = "mmio-sram";
+ reg = <0 0x15140000 0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x15140000 0 0x40000>;
+ };
+
wo_ccif0: syscon@151a5000 {
compatible = "mediatek,mt7986-wo-ccif", "syscon";
reg = <0 0x151a5000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
index 53de9c1..6f0c81e 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
@@ -9,3 +9,14 @@ / {
model = "Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)";
chassis-type = "embedded";
};
+
+&gmac1 {
+ phy = <&int_2p5g_phy>;
+ phy-mode = "internal";
+ status = "okay";
+};
+
+&int_2p5g_phy {
+ pinctrl-0 = <&i2p5gbe_led0_pins>;
+ pinctrl-names = "i2p5gbe-led";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index 36bd1ef..4b3796b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -8,6 +8,25 @@ / {
compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
model = "Banana Pi BPI-R4 (2x SFP+)";
chassis-type = "embedded";
+
+ /* SFP2 cage (LAN) */
+ sfp2: sfp2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp2>;
+ maximum-power-milliwatt = <3000>;
+
+ los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
+ rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&gmac1 {
+ managed = "in-band-status";
+ phy-mode = "usxgmii";
+ sfp = <&sfp2>;
};
&pca9545 {
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 5fd222df..0ff69da 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -5,10 +5,17 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+#include <dt-bindings/leds/common.h>
#include "mt7988a.dtsi"
/ {
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -58,6 +65,19 @@ reg_3p3v: regulator-3p3v {
regulator-boot-on;
regulator-always-on;
};
+
+ /* SFP1 cage (WAN) */
+ sfp1: sfp1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c_sfp1>;
+ maximum-power-milliwatt = <3000>;
+
+ los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
+ rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+ };
};
&cci {
@@ -128,6 +148,72 @@ map-cpu-active-low {
};
};
+&gmac2 {
+ managed = "in-band-status";
+ phy-mode = "usxgmii";
+ sfp = <&sfp1>;
+};
+
+&gsw_phy0 {
+ pinctrl-0 = <&gbe0_led0_pins>;
+ pinctrl-names = "gbe-led";
+};
+
+&gsw_phy0_led0 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ status = "okay";
+};
+
+&gsw_port0 {
+ label = "wan";
+};
+
+&gsw_phy1 {
+ pinctrl-0 = <&gbe1_led0_pins>;
+ pinctrl-names = "gbe-led";
+};
+
+&gsw_phy1_led0 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ status = "okay";
+};
+
+&gsw_port1 {
+ label = "lan1";
+};
+
+&gsw_phy2 {
+ pinctrl-0 = <&gbe2_led0_pins>;
+ pinctrl-names = "gbe-led";
+};
+
+&gsw_phy2_led0 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ status = "okay";
+};
+
+&gsw_port2 {
+ label = "lan2";
+};
+
+&gsw_phy3 {
+ pinctrl-0 = <&gbe3_led0_pins>;
+ pinctrl-names = "gbe-led";
+};
+
+&gsw_phy3_led0 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ status = "okay";
+};
+
+&gsw_port3 {
+ label = "lan3";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index 560ec86..366203a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -680,7 +680,28 @@ xphyu3port0: usb-phy@11e13000 {
};
};
- clock-controller@11f40000 {
+ xfi_tphy0: phy@11f20000 {
+ compatible = "mediatek,mt7988-xfi-tphy";
+ reg = <0 0x11f20000 0 0x10000>;
+ clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+ <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+ clock-names = "xfipll", "topxtal";
+ resets = <&watchdog 14>;
+ mediatek,usxgmii-performance-errata;
+ #phy-cells = <0>;
+ };
+
+ xfi_tphy1: phy@11f30000 {
+ compatible = "mediatek,mt7988-xfi-tphy";
+ reg = <0 0x11f30000 0 0x10000>;
+ clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+ <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>;
+ clock-names = "xfipll", "topxtal";
+ resets = <&watchdog 15>;
+ #phy-cells = <0>;
+ };
+
+ xfi_pll: clock-controller@11f40000 {
compatible = "mediatek,mt7988-xfi-pll";
reg = <0 0x11f40000 0 0x1000>;
resets = <&watchdog 16>;
@@ -714,19 +735,277 @@ phy_calibration_p3: calib@97c {
};
};
- clock-controller@15000000 {
+ ethsys: clock-controller@15000000 {
compatible = "mediatek,mt7988-ethsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
- clock-controller@15031000 {
+ switch: switch@15020000 {
+ compatible = "mediatek,mt7988-switch";
+ reg = <0 0x15020000 0 0x8000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <ðwarp MT7988_ETHWARP_RST_SWITCH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gsw_port0: port@0 {
+ reg = <0>;
+ phy-handle = <&gsw_phy0>;
+ phy-mode = "internal";
+ };
+
+ gsw_port1: port@1 {
+ reg = <1>;
+ phy-handle = <&gsw_phy1>;
+ phy-mode = "internal";
+ };
+
+ gsw_port2: port@2 {
+ reg = <2>;
+ phy-handle = <&gsw_phy2>;
+ phy-mode = "internal";
+ };
+
+ gsw_port3: port@3 {
+ reg = <3>;
+ phy-handle = <&gsw_phy3>;
+ phy-mode = "internal";
+ };
+
+ port@6 {
+ reg = <6>;
+ ethernet = <&gmac0>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mediatek,pio = <&pio>;
+
+ gsw_phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupts = <0>;
+ nvmem-cells = <&phy_calibration_p0>;
+ nvmem-cell-names = "phy-cal-data";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gsw_phy0_led0: led@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ gsw_phy0_led1: led@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+ };
+
+ gsw_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ interrupts = <1>;
+ nvmem-cells = <&phy_calibration_p1>;
+ nvmem-cell-names = "phy-cal-data";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gsw_phy1_led0: led@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ gsw_phy1_led1: led@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+ };
+
+ gsw_phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ interrupts = <2>;
+ nvmem-cells = <&phy_calibration_p2>;
+ nvmem-cell-names = "phy-cal-data";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gsw_phy2_led0: led@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ gsw_phy2_led1: led@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+ };
+
+ gsw_phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ interrupts = <3>;
+ nvmem-cells = <&phy_calibration_p3>;
+ nvmem-cell-names = "phy-cal-data";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gsw_phy3_led0: led@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ gsw_phy3_led1: led@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+ };
+
+ ethwarp: clock-controller@15031000 {
compatible = "mediatek,mt7988-ethwarp";
reg = <0 0x15031000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ eth: ethernet@15100000 {
+ compatible = "mediatek,mt7988-eth";
+ reg = <0 0x15100000 0 0x40000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+ "pdma1", "pdma2", "pdma3";
+ clocks = <ðsys CLK_ETHDMA_CRYPT0_EN>,
+ <ðsys CLK_ETHDMA_FE_EN>,
+ <ðsys CLK_ETHDMA_GP2_EN>,
+ <ðsys CLK_ETHDMA_GP1_EN>,
+ <ðsys CLK_ETHDMA_GP3_EN>,
+ <ðwarp CLK_ETHWARP_WOCPU2_EN>,
+ <ðwarp CLK_ETHWARP_WOCPU1_EN>,
+ <ðwarp CLK_ETHWARP_WOCPU0_EN>,
+ <ðsys CLK_ETHDMA_ESW_EN>,
+ <&topckgen CLK_TOP_ETH_GMII_SEL>,
+ <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>,
+ <&topckgen CLK_TOP_ETH_SYS_200M_SEL>,
+ <&topckgen CLK_TOP_ETH_SYS_SEL>,
+ <&topckgen CLK_TOP_ETH_XGMII_SEL>,
+ <&topckgen CLK_TOP_ETH_MII_SEL>,
+ <&topckgen CLK_TOP_NETSYS_SEL>,
+ <&topckgen CLK_TOP_NETSYS_500M_SEL>,
+ <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>,
+ <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>,
+ <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>,
+ <&topckgen CLK_TOP_NETSYS_WARP_SEL>,
+ <ðsys CLK_ETHDMA_XGP1_EN>,
+ <ðsys CLK_ETHDMA_XGP2_EN>,
+ <ðsys CLK_ETHDMA_XGP3_EN>;
+ clock-names = "crypto", "fe", "gp2", "gp1", "gp3",
+ "ethwarp_wocpu2", "ethwarp_wocpu1",
+ "ethwarp_wocpu0", "esw", "top_eth_gmii_sel",
+ "top_eth_refck_50m_sel", "top_eth_sys_200m_sel",
+ "top_eth_sys_sel", "top_eth_xgmii_sel",
+ "top_eth_mii_sel", "top_netsys_sel",
+ "top_netsys_500m_sel", "top_netsys_pao_2x_sel",
+ "top_netsys_sync_250m_sel",
+ "top_netsys_ppefb_250m_sel",
+ "top_netsys_warp_sel","xgp1", "xgp2", "xgp3";
+ assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+ <&topckgen CLK_TOP_NETSYS_GSW_SEL>,
+ <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>,
+ <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>,
+ <&topckgen CLK_TOP_SGM_0_SEL>,
+ <&topckgen CLK_TOP_SGM_1_SEL>;
+ assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+ <&topckgen CLK_TOP_NET1PLL_D4>,
+ <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+ <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+ <&apmixedsys CLK_APMIXED_SGMPLL>,
+ <&apmixedsys CLK_APMIXED_SGMPLL>;
+ sram = <ð_sram>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mediatek,ethsys = <ðsys>;
+ mediatek,infracfg = <&topmisc>;
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "internal";
+
+ /* Connected to internal switch */
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ gmac2: mac@2 {
+ compatible = "mediatek,eth-mac";
+ reg = <2>;
+ status = "disabled";
+ };
+
+ mdio_bus: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* internal 2.5G PHY */
+ int_2p5g_phy: ethernet-phy@15 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <15>;
+ };
+ };
+ };
+
+ eth_sram: sram@15400000 {
+ compatible = "mmio-sram";
+ reg = <0 0x15400000 0 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x15400000 0 0x200000>;
+ };
};
thermal-zones {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 586eee7..f69ffcb9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -39,8 +39,8 @@ da7219_aad {
};
&pio {
- da7219_pins: da7219_pins {
- pins1 {
+ da7219_pins: da7219-pins {
+ pins-intn {
pinmux = <PINMUX_GPIO165__FUNC_GPIO165>;
input-enable;
bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 548e22c..c4aedf8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -17,7 +17,7 @@ ts3a227e: ts3a227e@3b {
};
&pio {
- ts3a227e_pins: ts3a227e_pins {
+ ts3a227e_pins: ts3a227e-pins {
pins1 {
pinmux = <PINMUX_GPIO157__FUNC_GPIO157>;
input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 80888bd..1b74ec1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -93,11 +93,6 @@ cros_ec_pwm: pwm {
};
};
-&dsi0 {
- status = "okay";
- /delete-node/panel@0;
-};
-
&dsi_out {
remote-endpoint = <&anx7625_in>;
};
@@ -395,14 +390,14 @@ &pio {
"",
"";
- pp1000_mipibrdg_en: pp1000-mipibrdg-en {
+ pp1000_mipibrdg_en: pp1000-mipibrdg-en-pins {
pins1 {
pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
output-low;
};
};
- pp1800_mipibrdg_en: pp1800-mipibrdg-en {
+ pp1800_mipibrdg_en: pp1800-mipibrdg-en-pins {
pins1 {
pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
output-low;
@@ -410,20 +405,20 @@ pins1 {
};
pp3300_panel_pins: pp3300-panel-pins {
- panel_3v3_enable: panel-3v3-enable {
+ panel_3v3_enable: pins-panel-en {
pinmux = <PINMUX_GPIO35__FUNC_GPIO35>;
output-low;
};
};
- ppvarp_lcd_en: ppvarp-lcd-en {
+ ppvarp_lcd_en: ppvarp-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
output-low;
};
};
- ppvarn_lcd_en: ppvarn-lcd-en {
+ ppvarn_lcd_en: ppvarn-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
output-low;
@@ -444,27 +439,27 @@ pins2 {
};
touchscreen_pins: touchscreen-pins {
- touch-int-odl {
+ pins-intn {
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
input-enable;
bias-pull-up;
};
- touch-rst-l {
+ pins-rst {
pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
output-high;
};
};
trackpad_pins: trackpad-pins {
- trackpad-int {
+ pins-intn {
pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
input-enable;
bias-disable; /* pulled externally */
};
};
- pp3300_mipibrdg_en: pp3300-mipibrdg-en {
+ pp3300_mipibrdg_en: pp3300-mipibrdg-en-pins {
pins1 {
pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
output-low;
@@ -472,13 +467,13 @@ pins1 {
};
volume_button_pins: volume-button-pins {
- voldn-btn-odl {
+ pins-voldn {
pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
input-enable;
bias-pull-up;
};
- volup-btn-odl {
+ pins-volup {
pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
input-enable;
bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index ff02f63..d71972c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -61,6 +61,33 @@ &bluetooth {
firmware-name = "nvm_00440302_i2s_eu.bin";
};
+&dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ /* compatible will be set in board dts */
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pins_default>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ rotation = <270>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&dsi_out {
+ remote-endpoint = <&panel_in>;
+};
+
&i2c0 {
status = "okay";
};
@@ -304,35 +331,35 @@ &pio {
"",
"";
- ppvarp_lcd_en: ppvarp-lcd-en {
+ ppvarp_lcd_en: ppvarp-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
output-low;
};
};
- ppvarn_lcd_en: ppvarn-lcd-en {
+ ppvarn_lcd_en: ppvarn-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
output-low;
};
};
- pp1800_lcd_en: pp1800-lcd-en {
+ pp1800_lcd_en: pp1800-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
output-low;
};
};
- open_touch: open_touch {
- irq_pin {
+ open_touch: opentouch-pins {
+ pins-intn {
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
input-enable;
bias-pull-up;
};
- rst_pin {
+ pins-rst {
pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
/*
@@ -349,8 +376,8 @@ rst_pin {
};
};
- pen_eject: peneject {
- pen_eject {
+ pen_eject: pen-pins {
+ pins-eject {
pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
input-enable;
/* External pull-up. */
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index da6e767..b702ff0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -42,6 +42,34 @@ pp1800_lcd: pp1800-lcd {
};
};
+&dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel: panel@0 {
+ /* compatible will be set in board dts */
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pins_default>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ rotation = <270>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&dsi_out {
+ remote-endpoint = <&panel_in>;
+};
+
&i2c0 {
status = "okay";
@@ -292,35 +320,35 @@ &pio {
"",
"";
- ppvarp_lcd_en: ppvarp-lcd-en {
+ ppvarp_lcd_en: ppvarp-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
output-low;
};
};
- ppvarn_lcd_en: ppvarn-lcd-en {
+ ppvarn_lcd_en: ppvarn-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
output-low;
};
};
- pp1800_lcd_en: pp1800-lcd-en {
+ pp1800_lcd_en: pp1800-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
output-low;
};
};
- touch_default: touchdefault {
- pin_irq {
+ touch_default: touch-pins {
+ pins-intn {
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
input-enable;
bias-pull-up;
};
- touch_pin_reset: pin_reset {
+ touch_pin_reset: pins-rst {
pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
/*
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index 8b56b85..b6cfcaf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -45,6 +45,34 @@ &bluetooth {
firmware-name = "nvm_00440302_i2s_eu.bin";
};
+&dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel: panel@0 {
+ /* compatible will be set in board dts */
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pins_default>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ rotation = <270>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&dsi_out {
+ remote-endpoint = <&panel_in>;
+};
+
&i2c0 {
status = "okay";
@@ -296,35 +324,35 @@ &pio {
"",
"";
- ppvarp_lcd_en: ppvarp-lcd-en {
+ ppvarp_lcd_en: ppvarp-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
output-low;
};
};
- ppvarn_lcd_en: ppvarn-lcd-en {
+ ppvarn_lcd_en: ppvarn-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
output-low;
};
};
- pp1800_lcd_en: pp1800-lcd-en {
+ pp1800_lcd_en: pp1800-lcd-en-pins {
pins1 {
pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
output-low;
};
};
- open_touch: open_touch {
- irq_pin {
+ open_touch: opentouch-pins {
+ pins-intn {
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
input-enable;
bias-pull-up;
};
- rst_pin {
+ pins-rst {
pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
/*
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 400c61d..4b87d49 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -252,29 +252,6 @@ &cpu7 {
&dsi0 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
- panel: panel@0 {
- /* compatible will be set in board dts */
- reg = <0>;
- enable-gpios = <&pio 45 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&panel_pins_default>;
- avdd-supply = <&ppvarn_lcd>;
- avee-supply = <&ppvarp_lcd>;
- pp1800-supply = <&pp1800_lcd>;
- backlight = <&backlight_lcd0>;
- rotation = <270>;
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
- };
-};
-
-&dsi_out {
- remote-endpoint = <&panel_in>;
};
&gic {
@@ -435,7 +412,7 @@ &mt6358_vsram_gpu_reg {
};
&pio {
- aud_pins_default: audiopins {
+ aud_pins_default: audio-pins {
pins-bus {
pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
<PINMUX_GPIO98__FUNC_I2S2_BCK>,
@@ -457,7 +434,7 @@ pins-bus {
};
};
- aud_pins_tdm_out_on: audiotdmouton {
+ aud_pins_tdm_out_on: audio-tdmout-on-pins {
pins-bus {
pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
@@ -469,7 +446,7 @@ pins-bus {
};
};
- aud_pins_tdm_out_off: audiotdmoutoff {
+ aud_pins_tdm_out_off: audio-tdmout-off-pins {
pins-bus {
pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
<PINMUX_GPIO170__FUNC_GPIO170>,
@@ -490,22 +467,22 @@ pins-bt-en {
};
};
- ec_ap_int_odl: ec-ap-int-odl {
- pins1 {
+ ec_ap_int_odl: ec-ap-int-odl-pins {
+ pins-intn {
pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
input-enable;
bias-pull-up;
};
};
- h1_int_od_l: h1-int-od-l {
- pins1 {
+ h1_int_od_l: h1-int-od-l-pins {
+ pins-intn {
pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
input-enable;
};
};
- i2c0_pins: i2c0 {
+ i2c0_pins: i2c0-pins {
pins-bus {
pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
<PINMUX_GPIO83__FUNC_SCL0>;
@@ -513,7 +490,7 @@ pins-bus {
};
};
- i2c1_pins: i2c1 {
+ i2c1_pins: i2c1-pins {
pins-bus {
pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
<PINMUX_GPIO84__FUNC_SCL1>;
@@ -521,7 +498,7 @@ pins-bus {
};
};
- i2c2_pins: i2c2 {
+ i2c2_pins: i2c2-pins {
pins-bus {
pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
<PINMUX_GPIO104__FUNC_SDA2>;
@@ -529,7 +506,7 @@ pins-bus {
};
};
- i2c3_pins: i2c3 {
+ i2c3_pins: i2c3-pins {
pins-bus {
pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
<PINMUX_GPIO51__FUNC_SDA3>;
@@ -537,7 +514,7 @@ pins-bus {
};
};
- i2c4_pins: i2c4 {
+ i2c4_pins: i2c4-pins {
pins-bus {
pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
<PINMUX_GPIO106__FUNC_SDA4>;
@@ -545,7 +522,7 @@ pins-bus {
};
};
- i2c5_pins: i2c5 {
+ i2c5_pins: i2c5-pins {
pins-bus {
pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
<PINMUX_GPIO49__FUNC_SDA5>;
@@ -553,7 +530,7 @@ pins-bus {
};
};
- i2c6_pins: i2c6 {
+ i2c6_pins: i2c6-pins {
pins-bus {
pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
<PINMUX_GPIO12__FUNC_SDA6>;
@@ -561,7 +538,7 @@ pins-bus {
};
};
- mmc0_pins_default: mmc0-pins-default {
+ mmc0_pins_default: mmc0-default-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
@@ -580,7 +557,7 @@ pins-cmd-dat {
pins-clk {
pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_14mA>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
pins-rst {
@@ -609,13 +586,13 @@ pins-cmd-dat {
pins-clk {
pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_14mA>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
pins-ds {
pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
drive-strength = <MTK_DRIVE_14mA>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
pins-rst {
@@ -625,7 +602,7 @@ pins-rst {
};
};
- mmc1_pins_default: mmc1-pins-default {
+ mmc1_pins_default: mmc1-default-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
<PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
@@ -633,17 +610,17 @@ pins-cmd-dat {
<PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
input-enable;
- mediatek,pull-up-adv = <10>;
+ mediatek,pull-up-adv = <2>;
};
pins-clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
input-enable;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
};
- mmc1_pins_uhs: mmc1-pins-uhs {
+ mmc1_pins_uhs: mmc1-uhs-pins {
pins-cmd-dat {
pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
<PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
@@ -652,26 +629,26 @@ pins-cmd-dat {
<PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
drive-strength = <6>;
input-enable;
- mediatek,pull-up-adv = <10>;
+ mediatek,pull-up-adv = <2>;
};
pins-clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
drive-strength = <8>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
input-enable;
};
};
- panel_pins_default: panel-pins-default {
- panel-reset {
+ panel_pins_default: panel-pins {
+ pins-panel-reset {
pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
output-low;
bias-pull-up;
};
};
- pwm0_pin_default: pwm0-pin-default {
+ pwm0_pin_default: pwm0-pins {
pins1 {
pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
output-high;
@@ -682,15 +659,15 @@ pins2 {
};
};
- scp_pins: scp {
+ scp_pins: scp-pins {
pins-scp-uart {
pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
<PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
};
};
- spi0_pins: spi0 {
- pins-spi {
+ spi0_pins: spi0-pins {
+ pins-bus {
pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
<PINMUX_GPIO86__FUNC_GPIO86>,
<PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -699,8 +676,8 @@ pins-spi {
};
};
- spi1_pins: spi1 {
- pins-spi {
+ spi1_pins: spi1-pins {
+ pins-bus {
pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
<PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
<PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -709,21 +686,21 @@ pins-spi {
};
};
- spi2_pins: spi2 {
- pins-spi {
+ spi2_pins: spi2-pins {
+ pins-bus {
pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
<PINMUX_GPIO1__FUNC_SPI2_MO>,
<PINMUX_GPIO2__FUNC_SPI2_CLK>;
bias-disable;
};
- pins-spi-mi {
+ pins-miso {
pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
mediatek,pull-down-adv = <00>;
};
};
- spi3_pins: spi3 {
- pins-spi {
+ spi3_pins: spi3-pins {
+ pins-bus {
pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
<PINMUX_GPIO22__FUNC_SPI3_CSB>,
<PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -732,8 +709,8 @@ pins-spi {
};
};
- spi4_pins: spi4 {
- pins-spi {
+ spi4_pins: spi4-pins {
+ pins-bus {
pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
<PINMUX_GPIO18__FUNC_SPI4_CSB>,
<PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -742,8 +719,8 @@ pins-spi {
};
};
- spi5_pins: spi5 {
- pins-spi {
+ spi5_pins: spi5-pins {
+ pins-bus {
pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
<PINMUX_GPIO14__FUNC_SPI5_CSB>,
<PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -752,7 +729,7 @@ pins-spi {
};
};
- uart0_pins_default: uart0-pins-default {
+ uart0_pins_default: uart0-pins {
pins-rx {
pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
input-enable;
@@ -763,7 +740,7 @@ pins-tx {
};
};
- uart1_pins_default: uart1-pins-default {
+ uart1_pins_default: uart1-pins {
pins-rx {
pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
input-enable;
@@ -781,7 +758,7 @@ pins-cts {
};
};
- uart1_pins_sleep: uart1-pins-sleep {
+ uart1_pins_sleep: uart1-sleep-pins {
pins-rx {
pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
input-enable;
@@ -799,14 +776,14 @@ pins-cts {
};
};
- wifi_pins_pwrseq: wifi-pins-pwrseq {
+ wifi_pins_pwrseq: wifi-pwr-pins {
pins-wifi-enable {
pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
output-low;
};
};
- wifi_pins_wakeup: wifi-pins-wakeup {
+ wifi_pins_wakeup: wifi-wake-pins {
pins-wifi-wakeup {
pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index dbdee60..f60ef3e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -324,7 +324,7 @@ pins_cmd_dat {
pins_clk {
pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_14mA>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
pins_rst {
@@ -353,13 +353,13 @@ pins_cmd_dat {
pins_clk {
pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
drive-strength = <MTK_DRIVE_14mA>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
pins_ds {
pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
drive-strength = <MTK_DRIVE_14mA>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
pins_rst {
@@ -377,13 +377,13 @@ pins_cmd_dat {
<PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
input-enable;
- mediatek,pull-up-adv = <10>;
+ mediatek,pull-up-adv = <2>;
};
pins_clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
input-enable;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
};
pins_pmu {
@@ -401,13 +401,13 @@ pins_cmd_dat {
<PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
drive-strength = <6>;
input-enable;
- mediatek,pull-up-adv = <10>;
+ mediatek,pull-up-adv = <2>;
};
pins_clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
drive-strength = <8>;
- mediatek,pull-down-adv = <10>;
+ mediatek,pull-down-adv = <2>;
input-enable;
};
};
@@ -482,6 +482,10 @@ &mfg {
domain-supply = <&mt6358_vgpu_reg>;
};
+&cci {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
&cpu0 {
proc-supply = <&mt6358_vproc12_reg>;
};
@@ -527,10 +531,8 @@ &dpi0 {
pinctrl-0 = <&dpi_func_pins>;
pinctrl-1 = <&dpi_idle_pins>;
status = "okay";
+};
- port {
- dpi_out: endpoint {
- remote-endpoint = <&it66121_in>;
- };
- };
+&dpi_out {
+ remote-endpoint = <&it66121_in>;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 3c1fe80..960d895 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1667,6 +1667,21 @@ mmsys: syscon@14000000 {
mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
<&gce 1 CMDQ_THR_PRIO_HIGHEST>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mmsys_ep_main: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&ovl0_in>;
+ };
+
+ mmsys_ep_ext: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&ovl_2l1_in>;
+ };
+ };
};
dma-controller0@14001000 {
@@ -1733,6 +1748,25 @@ ovl0: ovl@14008000 {
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ovl0_in: endpoint {
+ remote-endpoint = <&mmsys_ep_main>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ovl0_out: endpoint {
+ remote-endpoint = <&ovl_2l0_in>;
+ };
+ };
+ };
};
ovl_2l0: ovl@14009000 {
@@ -1743,6 +1777,25 @@ ovl_2l0: ovl@14009000 {
clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ovl_2l0_in: endpoint {
+ remote-endpoint = <&ovl0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ovl_2l0_out: endpoint {
+ remote-endpoint = <&rdma0_in>;
+ };
+ };
+ };
};
ovl_2l1: ovl@1400a000 {
@@ -1753,6 +1806,25 @@ ovl_2l1: ovl@1400a000 {
clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ovl_2l1_in: endpoint {
+ remote-endpoint = <&mmsys_ep_ext>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ovl_2l1_out: endpoint {
+ remote-endpoint = <&rdma1_in>;
+ };
+ };
+ };
};
rdma0: rdma@1400b000 {
@@ -1764,6 +1836,25 @@ rdma0: rdma@1400b000 {
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
mediatek,rdma-fifo-size = <5120>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ rdma0_in: endpoint {
+ remote-endpoint = <&ovl_2l0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ rdma0_out: endpoint {
+ remote-endpoint = <&color0_in>;
+ };
+ };
+ };
};
rdma1: rdma@1400c000 {
@@ -1775,6 +1866,25 @@ rdma1: rdma@1400c000 {
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
mediatek,rdma-fifo-size = <2048>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ rdma1_in: endpoint {
+ remote-endpoint = <&ovl_2l1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ rdma1_out: endpoint {
+ remote-endpoint = <&dpi_in>;
+ };
+ };
+ };
};
color0: color@1400e000 {
@@ -1785,6 +1895,25 @@ color0: color@1400e000 {
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_COLOR0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ color0_in: endpoint {
+ remote-endpoint = <&rdma0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ color0_out: endpoint {
+ remote-endpoint = <&ccorr0_in>;
+ };
+ };
+ };
};
ccorr0: ccorr@1400f000 {
@@ -1794,6 +1923,25 @@ ccorr0: ccorr@1400f000 {
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_CCORR0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ccorr0_in: endpoint {
+ remote-endpoint = <&color0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ccorr0_out: endpoint {
+ remote-endpoint = <&aal0_in>;
+ };
+ };
+ };
};
aal0: aal@14010000 {
@@ -1803,6 +1951,25 @@ aal0: aal@14010000 {
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_AAL0>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ aal0_in: endpoint {
+ remote-endpoint = <&ccorr0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ aal0_out: endpoint {
+ remote-endpoint = <&gamma0_in>;
+ };
+ };
+ };
};
gamma0: gamma@14011000 {
@@ -1812,6 +1979,25 @@ gamma0: gamma@14011000 {
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ gamma0_in: endpoint {
+ remote-endpoint = <&aal0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ gamma0_out: endpoint {
+ remote-endpoint = <&dither0_in>;
+ };
+ };
+ };
};
dither0: dither@14012000 {
@@ -1821,6 +2007,25 @@ dither0: dither@14012000 {
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_DITHER0>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dither0_in: endpoint {
+ remote-endpoint = <&gamma0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dither0_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
};
dsi0: dsi@14014000 {
@@ -1837,8 +2042,21 @@ dsi0: dsi@14014000 {
phy-names = "dphy";
status = "disabled";
- port {
- dsi_out: endpoint { };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&dither0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint { };
+ };
};
};
@@ -1853,8 +2071,21 @@ dpi0: dpi@14015000 {
clock-names = "pixel", "engine", "pll";
status = "disabled";
- port {
- dpi_out: endpoint { };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpi_in: endpoint {
+ remote-endpoint = <&rdma1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpi_out: endpoint { };
+ };
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
index 7c97119..72a2a2b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -71,14 +71,14 @@ &i2c1 {
i2c-scl-internal-delay-ns = <10000>;
touchscreen: touchscreen@10 {
- compatible = "hid-over-i2c";
+ compatible = "elan,ekth6915";
reg = <0x10>;
interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
- post-power-on-delay-ms = <10>;
- hid-descr-addr = <0x0001>;
- vdd-supply = <&pp3300_s3>;
+ reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&pp3300_s3>;
+ no-reset-on-power-off;
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
index 26d3451..24d9ede 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -42,3 +42,7 @@ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
CROS_STD_MAIN_KEYMAP
>;
};
+
+&touchscreen {
+ compatible = "elan,ekth6a12nay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
index c5254ae..7fedbac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -164,6 +164,12 @@ reserved_memory: reserved-memory {
#size-cells = <2>;
ranges;
+ scp_mem_reserved: memory@50000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x50000000 0 0x800000>;
+ no-map;
+ };
+
apu_mem: memory@55000000 {
compatible = "shared-dma-pool";
reg = <0 0x55000000 0 0x1400000>;
@@ -1077,6 +1083,13 @@ pins-bus {
};
};
+ scp_pins: scp-pins {
+ pins-scp-vreq {
+ pinmux = <PINMUX_GPIO98__FUNC_O_SCP_VREQ_VAO>;
+ bias-disable;
+ };
+ };
+
spi0_pins: spi0-pins {
pins-bus {
pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
@@ -1146,6 +1159,18 @@ &postmask0_out {
remote-endpoint = <&dither0_in>;
};
+&scp_cluster {
+ status = "okay";
+};
+
+&scp_c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&scp_pins>;
+ firmware-name = "mediatek/mt8188/scp.img";
+ memory-region = <&scp_mem_reserved>;
+ status = "okay";
+};
+
&sound {
pinctrl-names = "aud_etdm_hp_on", "aud_etdm_hp_off",
"aud_etdm_spk_on", "aud_etdm_spk_off",
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 2024784..90c388f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -2183,7 +2183,7 @@ imp_iic_wrap_en: clock-controller@11ec2000 {
};
efuse: efuse@11f20000 {
- compatible = "mediatek,mt8188-efuse", "mediatek,efuse";
+ compatible = "mediatek,mt8188-efuse", "mediatek,mt8186-efuse";
reg = <0 0x11f20000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index a82d716f..a50b4e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -13,6 +13,7 @@ / {
&audio_codec {
compatible = "realtek,rt5682i";
realtek,btndet-delay = <16>;
+ VBAT-supply = <&pp3300_z5>;
};
&sound {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2d6522c..a8657c0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -13,6 +13,7 @@ / {
&audio_codec {
compatible = "realtek,rt5682i";
realtek,btndet-delay = <16>;
+ VBAT-supply = <&pp3300_z5>;
};
&pio_default {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index e705998..b3761b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -534,8 +534,9 @@ audio_codec: codec@1a {
realtek,jd-src = <1>;
AVDD-supply = <&mt6359_vio18_ldo_reg>;
+ DBVDD-supply = <&mt6359_vio18_ldo_reg>;
MICVDD-supply = <&pp3300_z2>;
- VBAT-supply = <&pp3300_z5>;
+ LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 8877953..ec452d6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1588,9 +1588,6 @@ pcie0: pcie@112f0000 {
power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
- resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
- reset-names = "mac";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
@@ -3039,7 +3036,7 @@ venc: video-codec@1a020000 {
#size-cells = <2>;
};
- jpgdec-master {
+ jpeg-decoder@1a040000 {
compatible = "mediatek,mt8195-jpgdec";
power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
@@ -3050,11 +3047,12 @@ jpgdec-master {
<&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0 0 0 0x1a040000 0 0x20000>,
+ <1 0 0 0x1b040000 0 0x10000>;
- jpgdec@1a040000 {
+ jpgdec@0,0 {
compatible = "mediatek,mt8195-jpgdec-hw";
- reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+ reg = <0 0 0 0x10000>;/* JPGDEC_C0 */
iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
<&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
<&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -3067,9 +3065,9 @@ jpgdec@1a040000 {
power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
};
- jpgdec@1a050000 {
+ jpgdec@0,10000 {
compatible = "mediatek,mt8195-jpgdec-hw";
- reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+ reg = <0 0 0x10000 0x10000>;/* JPGDEC_C1 */
iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
<&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
<&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -3082,9 +3080,9 @@ jpgdec@1a050000 {
power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
};
- jpgdec@1b040000 {
+ jpgdec@1,0 {
compatible = "mediatek,mt8195-jpgdec-hw";
- reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+ reg = <1 0 0 0x10000>;/* JPGDEC_C2 */
iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
<&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
<&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
@@ -3113,7 +3111,7 @@ vdosys0: syscon@1c01a000 {
};
- jpgenc-master {
+ jpeg-encoder@1a030000 {
compatible = "mediatek,mt8195-jpgenc";
power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
@@ -3122,11 +3120,12 @@ jpgenc-master {
<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0 0 0 0x1a030000 0 0x10000>,
+ <1 0 0 0x1b030000 0 0x10000>;
- jpgenc@1a030000 {
+ jpgenc@0,0 {
compatible = "mediatek,mt8195-jpgenc-hw";
- reg = <0 0x1a030000 0 0x10000>;
+ reg = <0 0 0 0x10000>;
iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
<&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
<&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
@@ -3137,9 +3136,9 @@ jpgenc@1a030000 {
power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
};
- jpgenc@1b030000 {
+ jpgenc@1,0 {
compatible = "mediatek,mt8195-jpgenc-hw";
- reg = <0 0x1b030000 0 0x10000>;
+ reg = <1 0 0 0x10000>;
iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
index 4985b65..d16f545c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
@@ -352,7 +352,7 @@ regulator {
LDO_VIN2-supply = <&vsys>;
LDO_VIN3-supply = <&vsys>;
- mt6360_buck1: BUCK1 {
+ mt6360_buck1: buck1 {
regulator-name = "emi_vdd2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
@@ -362,7 +362,7 @@ MT6360_OPMODE_LP
regulator-always-on;
};
- mt6360_buck2: BUCK2 {
+ mt6360_buck2: buck2 {
regulator-name = "emi_vddq";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1300000>;
@@ -372,7 +372,7 @@ MT6360_OPMODE_LP
regulator-always-on;
};
- mt6360_ldo1: LDO1 {
+ mt6360_ldo1: ldo1 {
regulator-name = "mt6360_ldo1"; /* Test point */
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
@@ -380,7 +380,7 @@ mt6360_ldo1: LDO1 {
MT6360_OPMODE_LP>;
};
- mt6360_ldo2: LDO2 {
+ mt6360_ldo2: ldo2 {
regulator-name = "panel1_p1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -388,7 +388,7 @@ mt6360_ldo2: LDO2 {
MT6360_OPMODE_LP>;
};
- mt6360_ldo3: LDO3 {
+ mt6360_ldo3: ldo3 {
regulator-name = "vmc_pmu";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -396,7 +396,7 @@ mt6360_ldo3: LDO3 {
MT6360_OPMODE_LP>;
};
- mt6360_ldo5: LDO5 {
+ mt6360_ldo5: ldo5 {
regulator-name = "vmch_pmu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -404,7 +404,7 @@ mt6360_ldo5: LDO5 {
MT6360_OPMODE_LP>;
};
- mt6360_ldo6: LDO6 {
+ mt6360_ldo6: ldo6 {
regulator-name = "mt6360_ldo6"; /* Test point */
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2100000>;
@@ -412,7 +412,7 @@ mt6360_ldo6: LDO6 {
MT6360_OPMODE_LP>;
};
- mt6360_ldo7: LDO7 {
+ mt6360_ldo7: ldo7 {
regulator-name = "emi_vmddr_en";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 329c60c..d32f973 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -8,6 +8,7 @@
#include "mt8195.dtsi"
#include "mt6359.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
@@ -60,6 +61,18 @@ backlight: backlight {
status = "disabled";
};
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ button-volume-up {
+ wakeup-source;
+ debounce-interval = <100>;
+ gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+ label = "volume_up";
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
wifi_vreg: regulator-wifi-3v3-en {
compatible = "regulator-fixed";
regulator-name = "wifi_3v3_en";
@@ -626,6 +639,14 @@ pins-txd {
};
};
+ gpio_key_pins: gpio-keys-pins {
+ pins {
+ pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
i2c2_pins: i2c2-pins {
pins-bus {
pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
@@ -880,6 +901,21 @@ &pciephy {
&pmic {
interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+ mt6359keys: keys {
+ compatible = "mediatek,mt6359-keys";
+ mediatek,long-press-mode = <1>;
+ power-off-time-sec = <0>;
+
+ power-key {
+ linux,keycodes = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ home {
+ linux,keycodes = <KEY_HOME>;
+ };
+ };
};
&scp {
@@ -990,6 +1026,16 @@ &uart1 {
status = "okay";
};
+&ufshci {
+ vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+ vccq2-supply = <&mt6359_vufs_ldo_reg>;
+ status = "okay";
+};
+
+&ufsphy {
+ status = "okay";
+};
+
&ssusb0 {
pinctrl-names = "default";
pinctrl-0 = <&usb3_port0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
index cce642c..3d3db33 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -11,7 +11,7 @@
/ {
model = "Pumpkin MT8516";
- compatible = "mediatek,mt8516";
+ compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516";
memory@40000000 {
device_type = "memory";
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index a356db5..805fb82 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -198,8 +198,8 @@ &usb_phy {
};
&pio {
- gpio_keys_default: gpiodefault {
- pins_cmd_dat {
+ gpio_keys_default: gpio-keys-pins {
+ pins-cmd-dat {
pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
<MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
bias-pull-up;
@@ -207,7 +207,7 @@ pins_cmd_dat {
};
};
- i2c0_pins_a: i2c0 {
+ i2c0_pins_a: i2c0-pins {
pins1 {
pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
<MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -215,7 +215,7 @@ pins1 {
};
};
- i2c2_pins_a: i2c2 {
+ i2c2_pins_a: i2c2-pins {
pins1 {
pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
<MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
@@ -223,21 +223,21 @@ pins1 {
};
};
- tca6416_pins: pinmux_tca6416_pins {
- gpio_mux_rst_n_pin {
+ tca6416_pins: tca6416-pins {
+ pins-mux-rstn {
pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
output-high;
};
- gpio_mux_int_n_pin {
+ pins-mux-intn {
pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
input-enable;
bias-pull-up;
};
};
- ethernet_pins_default: ethernet {
- pins_ethernet {
+ ethernet_pins_default: ethernet-pins {
+ pins-eth {
pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
<MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
<MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
index acd3137..2413352 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -42,17 +42,13 @@ ahb {
interrupt-parent = <&gic>;
ranges;
- rstc: reset-controller@f0801000 {
+ clk: rstc: reset-controller@f0801000 {
compatible = "nuvoton,npcm845-reset";
- reg = <0x0 0xf0801000 0x0 0x78>;
- #reset-cells = <2>;
+ reg = <0x0 0xf0801000 0x0 0xC4>;
nuvoton,sysgcr = <&gcr>;
- };
-
- clk: clock-controller@f0801000 {
- compatible = "nuvoton,npcm845-clk";
+ #reset-cells = <2>;
+ clocks = <&refclk>;
#clock-cells = <1>;
- reg = <0x0 0xf0801000 0x0 0x1000>;
};
apb {
@@ -76,7 +72,7 @@ timer0: timer@8000 {
compatible = "nuvoton,npcm845-timer";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x8000 0x1C>;
- clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ clocks = <&refclk>;
clock-names = "refclk";
};
@@ -148,7 +144,7 @@ watchdog0: watchdog@801c {
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x801c 0x4>;
status = "disabled";
- clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ clocks = <&refclk>;
syscon = <&gcr>;
};
@@ -157,7 +153,7 @@ watchdog1: watchdog@901c {
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x901c 0x4>;
status = "disabled";
- clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ clocks = <&refclk>;
syscon = <&gcr>;
};
@@ -166,7 +162,7 @@ watchdog2: watchdog@a01c {
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xa01c 0x4>;
status = "disabled";
- clocks = <&clk NPCM8XX_CLK_REFCLK>;
+ clocks = <&refclk>;
syscon = <&gcr>;
};
};
@@ -235,5 +231,654 @@ gpio7: gpio@f0017000 {
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 224 32>;
};
+
+ iox1_pins: iox1-mux {
+ groups = "iox1";
+ function = "iox1";
+ };
+ iox2_pins: iox2-mux {
+ groups = "iox2";
+ function = "iox2";
+ };
+ smb1d_pins: smb1d-mux {
+ groups = "smb1d";
+ function = "smb1d";
+ };
+ smb2d_pins: smb2d-mux {
+ groups = "smb2d";
+ function = "smb2d";
+ };
+ lkgpo1_pins: lkgpo1-mux {
+ groups = "lkgpo1";
+ function = "lkgpo1";
+ };
+ lkgpo2_pins: lkgpo2-mux {
+ groups = "lkgpo2";
+ function = "lkgpo2";
+ };
+ ioxh_pins: ioxh-mux {
+ groups = "ioxh";
+ function = "ioxh";
+ };
+ gspi_pins: gspi-mux {
+ groups = "gspi";
+ function = "gspi";
+ };
+ smb5b_pins: smb5b-mux {
+ groups = "smb5b";
+ function = "smb5b";
+ };
+ smb5c_pins: smb5c-mux {
+ groups = "smb5c";
+ function = "smb5c";
+ };
+ lkgpo0_pins: lkgpo0-mux {
+ groups = "lkgpo0";
+ function = "lkgpo0";
+ };
+ pspi_pins: pspi-mux {
+ groups = "pspi";
+ function = "pspi";
+ };
+ jm1_pins: jm1-mux {
+ groups = "jm1";
+ function = "jm1";
+ };
+ jm2_pins: jm2-mux {
+ groups = "jm2";
+ function = "jm2";
+ };
+ smb4b_pins: smb4b-mux {
+ groups = "smb4b";
+ function = "smb4b";
+ };
+ smb4c_pins: smb4c-mux {
+ groups = "smb4c";
+ function = "smb4c";
+ };
+ smb15_pins: smb15-mux {
+ groups = "smb15";
+ function = "smb15";
+ };
+ smb16_pins: smb16-mux {
+ groups = "smb16";
+ function = "smb16";
+ };
+ smb17_pins: smb17-mux {
+ groups = "smb17";
+ function = "smb17";
+ };
+ smb18_pins: smb18-mux {
+ groups = "smb18";
+ function = "smb18";
+ };
+ smb19_pins: smb19-mux {
+ groups = "smb19";
+ function = "smb19";
+ };
+ smb20_pins: smb20-mux {
+ groups = "smb20";
+ function = "smb20";
+ };
+ smb21_pins: smb21-mux {
+ groups = "smb21";
+ function = "smb21";
+ };
+ smb22_pins: smb22-mux {
+ groups = "smb22";
+ function = "smb22";
+ };
+ smb23_pins: smb23-mux {
+ groups = "smb23";
+ function = "smb23";
+ };
+ smb23b_pins: smb23b-mux {
+ groups = "smb23b";
+ function = "smb23b";
+ };
+ smb4d_pins: smb4d-mux {
+ groups = "smb4d";
+ function = "smb4d";
+ };
+ smb14_pins: smb14-mux {
+ groups = "smb14";
+ function = "smb14";
+ };
+ smb5_pins: smb5-mux {
+ groups = "smb5";
+ function = "smb5";
+ };
+ smb4_pins: smb4-mux {
+ groups = "smb4";
+ function = "smb4";
+ };
+ smb3_pins: smb3-mux {
+ groups = "smb3";
+ function = "smb3";
+ };
+ spi0cs1_pins: spi0cs1-mux {
+ groups = "spi0cs1";
+ function = "spi0cs1";
+ };
+ spi1cs0_pins: spi1cs0-mux {
+ groups = "spi1cs0";
+ function = "spi1cs0";
+ };
+ spi1cs1_pins: spi1cs1-mux {
+ groups = "spi1cs1";
+ function = "spi1cs1";
+ };
+ spi1cs2_pins: spi1cs2-mux {
+ groups = "spi1cs2";
+ function = "spi1cs2";
+ };
+ spi1cs3_pins: spi1cs3-mux {
+ groups = "spi1cs3";
+ function = "spi1cs3";
+ };
+ smb3c_pins: smb3c-mux {
+ groups = "smb3c";
+ function = "smb3c";
+ };
+ smb3b_pins: smb3b-mux {
+ groups = "smb3b";
+ function = "smb3b";
+ };
+ bmcuart0a_pins: bmcuart0a-mux {
+ groups = "bmcuart0a";
+ function = "bmcuart0a";
+ };
+ uart1_pins: uart1-mux {
+ groups = "uart1";
+ function = "uart1";
+ };
+ jtag2_pins: jtag2-mux {
+ groups = "jtag2";
+ function = "jtag2";
+ };
+ bmcuart1_pins: bmcuart1-mux {
+ groups = "bmcuart1";
+ function = "bmcuart1";
+ };
+ uart2_pins: uart2-mux {
+ groups = "uart2";
+ function = "uart2";
+ };
+ bmcuart0b_pins: bmcuart0b-mux {
+ groups = "bmcuart0b";
+ function = "bmcuart0b";
+ };
+ r1err_pins: r1err-mux {
+ groups = "r1err";
+ function = "r1err";
+ };
+ r1md_pins: r1md-mux {
+ groups = "r1md";
+ function = "r1md";
+ };
+ r1oen_pins: r1oen-mux {
+ groups = "r1oen";
+ function = "r1oen";
+ };
+ r2oen_pins: r2oen-mux {
+ groups = "r2oen";
+ function = "r2oen";
+ };
+ rmii3_pins: rmii3-mux {
+ groups = "rmii3";
+ function = "rmii3";
+ };
+ r3oen_pins: r3oen-mux {
+ groups = "r3oen";
+ function = "r3oen";
+ };
+ smb3d_pins: smb3d-mux {
+ groups = "smb3d";
+ function = "smb3d";
+ };
+ fanin0_pins: fanin0-mux {
+ groups = "fanin0";
+ function = "fanin0";
+ };
+ fanin1_pins: fanin1-mux {
+ groups = "fanin1";
+ function = "fanin1";
+ };
+ fanin2_pins: fanin2-mux {
+ groups = "fanin2";
+ function = "fanin2";
+ };
+ fanin3_pins: fanin3-mux {
+ groups = "fanin3";
+ function = "fanin3";
+ };
+ fanin4_pins: fanin4-mux {
+ groups = "fanin4";
+ function = "fanin4";
+ };
+ fanin5_pins: fanin5-mux {
+ groups = "fanin5";
+ function = "fanin5";
+ };
+ fanin6_pins: fanin6-mux {
+ groups = "fanin6";
+ function = "fanin6";
+ };
+ fanin7_pins: fanin7-mux {
+ groups = "fanin7";
+ function = "fanin7";
+ };
+ fanin8_pins: fanin8-mux {
+ groups = "fanin8";
+ function = "fanin8";
+ };
+ fanin9_pins: fanin9-mux {
+ groups = "fanin9";
+ function = "fanin9";
+ };
+ fanin10_pins: fanin10-mux {
+ groups = "fanin10";
+ function = "fanin10";
+ };
+ fanin11_pins: fanin11-mux {
+ groups = "fanin11";
+ function = "fanin11";
+ };
+ fanin12_pins: fanin12-mux {
+ groups = "fanin12";
+ function = "fanin12";
+ };
+ fanin13_pins: fanin13-mux {
+ groups = "fanin13";
+ function = "fanin13";
+ };
+ fanin14_pins: fanin14-mux {
+ groups = "fanin14";
+ function = "fanin14";
+ };
+ fanin15_pins: fanin15-mux {
+ groups = "fanin15";
+ function = "fanin15";
+ };
+ pwm0_pins: pwm0-mux {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+ pwm1_pins: pwm1-mux {
+ groups = "pwm1";
+ function = "pwm1";
+ };
+ pwm2_pins: pwm2-mux {
+ groups = "pwm2";
+ function = "pwm2";
+ };
+ pwm3_pins: pwm3-mux {
+ groups = "pwm3";
+ function = "pwm3";
+ };
+ r2_pins: r2-mux {
+ groups = "r2";
+ function = "r2";
+ };
+ r2err_pins: r2err-mux {
+ groups = "r2err";
+ function = "r2err";
+ };
+ r2md_pins: r2md-mux {
+ groups = "r2md";
+ function = "r2md";
+ };
+ r3rxer_pins: r3rxer-mux {
+ groups = "r3rxer";
+ function = "r3rxer";
+ };
+ ga20kbc_pins: ga20kbc-mux {
+ groups = "ga20kbc";
+ function = "ga20kbc";
+ };
+ smb5d_pins: smb5d-mux {
+ groups = "smb5d";
+ function = "smb5d";
+ };
+ lpc_pins: lpc-mux {
+ groups = "lpc";
+ function = "lpc";
+ };
+ espi_pins: espi-mux {
+ groups = "espi";
+ function = "espi";
+ };
+ sg1mdio_pins: sg1mdio-mux {
+ groups = "sg1mdio";
+ function = "sg1mdio";
+ };
+ rg2_pins: rg2-mux {
+ groups = "rg2";
+ function = "rg2";
+ };
+ ddr_pins: ddr-mux {
+ groups = "ddr";
+ function = "ddr";
+ };
+ i3c0_pins: i3c0-mux {
+ groups = "i3c0";
+ function = "i3c0";
+ };
+ i3c1_pins: i3c1-mux {
+ groups = "i3c1";
+ function = "i3c1";
+ };
+ i3c2_pins: i3c2-mux {
+ groups = "i3c2";
+ function = "i3c2";
+ };
+ i3c3_pins: i3c3-mux {
+ groups = "i3c3";
+ function = "i3c3";
+ };
+ i3c4_pins: i3c4-mux {
+ groups = "i3c4";
+ function = "i3c4";
+ };
+ i3c5_pins: i3c5-mux {
+ groups = "i3c5";
+ function = "i3c5";
+ };
+ smb0_pins: smb0-mux {
+ groups = "smb0";
+ function = "smb0";
+ };
+ smb1_pins: smb1-mux {
+ groups = "smb1";
+ function = "smb1";
+ };
+ smb2_pins: smb2-mux {
+ groups = "smb2";
+ function = "smb2";
+ };
+ smb2c_pins: smb2c-mux {
+ groups = "smb2c";
+ function = "smb2c";
+ };
+ smb2b_pins: smb2b-mux {
+ groups = "smb2b";
+ function = "smb2b";
+ };
+ smb1c_pins: smb1c-mux {
+ groups = "smb1c";
+ function = "smb1c";
+ };
+ smb1b_pins: smb1b-mux {
+ groups = "smb1b";
+ function = "smb1b";
+ };
+ smb8_pins: smb8-mux {
+ groups = "smb8";
+ function = "smb8";
+ };
+ smb9_pins: smb9-mux {
+ groups = "smb9";
+ function = "smb9";
+ };
+ smb10_pins: smb10-mux {
+ groups = "smb10";
+ function = "smb10";
+ };
+ smb11_pins: smb11-mux {
+ groups = "smb11";
+ function = "smb11";
+ };
+ sd1_pins: sd1-mux {
+ groups = "sd1";
+ function = "sd1";
+ };
+ sd1pwr_pins: sd1pwr-mux {
+ groups = "sd1pwr";
+ function = "sd1pwr";
+ };
+ pwm4_pins: pwm4-mux {
+ groups = "pwm4";
+ function = "pwm4";
+ };
+ pwm5_pins: pwm5-mux {
+ groups = "pwm5";
+ function = "pwm5";
+ };
+ pwm6_pins: pwm6-mux {
+ groups = "pwm6";
+ function = "pwm6";
+ };
+ pwm7_pins: pwm7-mux {
+ groups = "pwm7";
+ function = "pwm7";
+ };
+ pwm8_pins: pwm8-mux {
+ groups = "pwm8";
+ function = "pwm8";
+ };
+ pwm9_pins: pwm9-mux {
+ groups = "pwm9";
+ function = "pwm9";
+ };
+ pwm10_pins: pwm10-mux {
+ groups = "pwm10";
+ function = "pwm10";
+ };
+ pwm11_pins: pwm11-mux {
+ groups = "pwm11";
+ function = "pwm11";
+ };
+ mmc8_pins: mmc8-mux {
+ groups = "mmc8";
+ function = "mmc8";
+ };
+ mmc_pins: mmc-mux {
+ groups = "mmc";
+ function = "mmc";
+ };
+ mmcwp_pins: mmcwp-mux {
+ groups = "mmcwp";
+ function = "mmcwp";
+ };
+ mmccd_pins: mmccd-mux {
+ groups = "mmccd";
+ function = "mmccd";
+ };
+ mmcrst_pins: mmcrst-mux {
+ groups = "mmcrst";
+ function = "mmcrst";
+ };
+ clkout_pins: clkout-mux {
+ groups = "clkout";
+ function = "clkout";
+ };
+ serirq_pins: serirq-mux {
+ groups = "serirq";
+ function = "serirq";
+ };
+ scipme_pins: scipme-mux {
+ groups = "scipme";
+ function = "scipme";
+ };
+ smb6_pins: smb6-mux {
+ groups = "smb6";
+ function = "smb6";
+ };
+ smb6b_pins: smb6b-mux {
+ groups = "smb6b";
+ function = "smb6b";
+ };
+ smb6c_pins: smb6c-mux {
+ groups = "smb6c";
+ function = "smb6c";
+ };
+ smb6d_pins: smb6d-mux {
+ groups = "smb6d";
+ function = "smb6d";
+ };
+ smb7_pins: smb7-mux {
+ groups = "smb7";
+ function = "smb7";
+ };
+ smb7b_pins: smb7b-mux {
+ groups = "smb7b";
+ function = "smb7b";
+ };
+ smb7c_pins: smb7c-mux {
+ groups = "smb7c";
+ function = "smb7c";
+ };
+ smb7d_pins: smb7d-mux {
+ groups = "smb7d";
+ function = "smb7d";
+ };
+ spi1_pins: spi1-mux {
+ groups = "spi1";
+ function = "spi1";
+ };
+ faninx_pins: faninx-mux {
+ groups = "faninx";
+ function = "faninx";
+ };
+ r1_pins: r1-mux {
+ groups = "r1";
+ function = "r1";
+ };
+ spi3_pins: spi3-mux {
+ groups = "spi3";
+ function = "spi3";
+ };
+ spi3cs1_pins: spi3cs1-mux {
+ groups = "spi3cs1";
+ function = "spi3cs1";
+ };
+ spi3quad_pins: spi3quad-mux {
+ groups = "spi3quad";
+ function = "spi3quad";
+ };
+ spi3cs2_pins: spi3cs2-mux {
+ groups = "spi3cs2";
+ function = "spi3cs2";
+ };
+ spi3cs3_pins: spi3cs3-mux {
+ groups = "spi3cs3";
+ function = "spi3cs3";
+ };
+ nprd_smi_pins: nprd-smi-mux {
+ groups = "nprd_smi";
+ function = "nprd_smi";
+ };
+ smi_pins: smi-mux {
+ groups = "smi";
+ function = "smi";
+ };
+ smb0b_pins: smb0b-mux {
+ groups = "smb0b";
+ function = "smb0b";
+ };
+ smb0c_pins: smb0c-mux {
+ groups = "smb0c";
+ function = "smb0c";
+ };
+ smb0den_pins: smb0den-mux {
+ groups = "smb0den";
+ function = "smb0den";
+ };
+ smb0d_pins: smb0d-mux {
+ groups = "smb0d";
+ function = "smb0d";
+ };
+ ddc_pins: ddc-mux {
+ groups = "ddc";
+ function = "ddc";
+ };
+ rg2mdio_pins: rg2mdio-mux {
+ groups = "rg2mdio";
+ function = "rg2mdio";
+ };
+ wdog1_pins: wdog1-mux {
+ groups = "wdog1";
+ function = "wdog1";
+ };
+ wdog2_pins: wdog2-mux {
+ groups = "wdog2";
+ function = "wdog2";
+ };
+ smb12_pins: smb12-mux {
+ groups = "smb12";
+ function = "smb12";
+ };
+ smb13_pins: smb13-mux {
+ groups = "smb13";
+ function = "smb13";
+ };
+ spix_pins: spix-mux {
+ groups = "spix";
+ function = "spix";
+ };
+ spixcs1_pins: spixcs1-mux {
+ groups = "spixcs1";
+ function = "spixcs1";
+ };
+ clkreq_pins: clkreq-mux {
+ groups = "clkreq";
+ function = "clkreq";
+ };
+ hgpio0_pins: hgpio0-mux {
+ groups = "hgpio0";
+ function = "hgpio0";
+ };
+ hgpio1_pins: hgpio1-mux {
+ groups = "hgpio1";
+ function = "hgpio1";
+ };
+ hgpio2_pins: hgpio2-mux {
+ groups = "hgpio2";
+ function = "hgpio2";
+ };
+ hgpio3_pins: hgpio3-mux {
+ groups = "hgpio3";
+ function = "hgpio3";
+ };
+ hgpio4_pins: hgpio4-mux {
+ groups = "hgpio4";
+ function = "hgpio4";
+ };
+ hgpio5_pins: hgpio5-mux {
+ groups = "hgpio5";
+ function = "hgpio5";
+ };
+ hgpio6_pins: hgpio6-mux {
+ groups = "hgpio6";
+ function = "hgpio6";
+ };
+ hgpio7_pins: hgpio7-mux {
+ groups = "hgpio7";
+ function = "hgpio7";
+ };
+ bu4_pins: bu4-mux {
+ groups = "bu4";
+ function = "bu4";
+ };
+ bu4b_pins: bu4b-mux {
+ groups = "bu4b";
+ function = "bu4b";
+ };
+ bu5_pins: bu5-mux {
+ groups = "bu5";
+ function = "bu5";
+ };
+ bu5b_pins: bu5b-mux {
+ groups = "bu5b";
+ function = "bu5b";
+ };
+ bu6_pins: bu6-mux {
+ groups = "bu6";
+ function = "bu6";
+ };
+ gpo187_pins: gpo187-mux {
+ groups = "gpo187";
+ function = "gpo187";
+ };
};
};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index eeceb5b..2638ee1 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -19,6 +19,12 @@ chosen {
memory@0 {
reg = <0x0 0x0 0x0 0x40000000>;
};
+
+ refclk: refclk-25mhz {
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ #clock-cells = <0>;
+ };
};
&serial0 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
index e02659e..872a695 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -148,6 +148,36 @@ uart0: serial@c5f0000 {
status = "disabled";
};
+ i2c2: i2c@c600000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x0 0x0c600000 0x0 0x10000>;
+ interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+ <&bpmp TEGRA264_CLK_PLLAON>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+ resets = <&bpmp TEGRA264_RESET_I2C2>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c3: i2c@c610000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x0 0x0c610000 0x0 0x10000>;
+ interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+ <&bpmp TEGRA264_CLK_PLLAON>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+ resets = <&bpmp TEGRA264_RESET_I2C3>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
pmc: pmc@c800000 {
compatible = "nvidia,tegra264-pmc";
reg = <0x0 0x0c800000 0x0 0x100000>,
@@ -272,6 +302,201 @@ smmu4: iommu@b000000 {
dma-coherent;
};
+ i2c14: i2c@c410000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c410000 0x0 0x10000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C14>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c15: i2c@c420000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c420000 0x0 0x10000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C15>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c16: i2c@c430000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c430000 0x0 0x10000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C16>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c0: i2c@c630000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c630000 0x0 0x10000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C0>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c1: i2c@c640000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c640000 0x0 0x10000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C1>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c4: i2c@c650000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c650000 0x0 0x10000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C4>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c6: i2c@c670000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c670000 0x0 0x10000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C6>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c7: i2c@c680000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c680000 0x0 0x10000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C7>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c8: i2c@c690000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c690000 0x0 0x10000>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C8>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c9: i2c@c6a0000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c6a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C9>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c10: i2c@c6b0000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c6b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C10>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c11: i2c@c6c0000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c6c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C11>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c12: i2c@c6d0000 {
+ compatible = "nvidia,tegra264-i2c";
+ reg = <0x00 0x0c6d0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+ <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ clock-names = "div-clk", "parent";
+ assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+ assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+ resets = <&bpmp TEGRA264_RESET_I2C12>;
+ reset-names = "i2c";
+ status = "disabled";
+ };
+
gic: interrupt-controller@46000000 {
compatible = "arm,gic-v3";
reg = <0x00 0x46000000 0x0 0x010000>, /* GICD */
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4bfa926..296688f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -13,6 +13,7 @@
dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5018-tplink-archer-ax55-v1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb
@@ -29,6 +30,12 @@
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb
+dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb
+
+lemans-evk-camera-csi1-imx577-dtbs := lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera-csi1-imx577.dtb
+dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
@@ -71,6 +78,7 @@
dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8953-flipkart-rimob.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
@@ -113,6 +121,7 @@
dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcm6490-particle-tachyon.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
@@ -231,9 +240,6 @@
dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
sdm845-db845c-navigation-mezzanine-dtbs := sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
@@ -275,6 +281,8 @@
dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-r8q.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-x1q.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb
@@ -287,6 +295,7 @@
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8450-samsung-r0q.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb
@@ -315,6 +324,10 @@
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb
x1e80100-crd-el2-dtbs := x1e80100-crd.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb x1e80100-crd-el2.dtb
+x1e80100-dell-inspiron-14-plus-7441-el2-dtbs := x1e80100-dell-inspiron-14-plus-7441.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-inspiron-14-plus-7441.dtb x1e80100-dell-inspiron-14-plus-7441-el2.dtb
+x1e80100-dell-latitude-7455-el2-dtbs := x1e80100-dell-latitude-7455.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-latitude-7455.dtb x1e80100-dell-latitude-7455-el2.dtb
x1e80100-dell-xps13-9345-el2-dtbs := x1e80100-dell-xps13-9345.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb x1e80100-dell-xps13-9345-el2.dtb
x1e80100-hp-elitebook-ultra-g1q-el2-dtbs := x1e80100-hp-elitebook-ultra-g1q.dtb x1-el2.dtbo
@@ -333,3 +346,7 @@
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb
+x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb
+x1p42100-lenovo-thinkbook-16-el2-dtbs := x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index b0c594c..ba6ccf0 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -157,8 +157,6 @@ &blsp_i2c4 {
status = "okay";
adv_bridge: bridge@39 {
- status = "okay";
-
compatible = "adi,adv7533";
reg = <0x39>;
@@ -181,7 +179,7 @@ adv_bridge: bridge@39 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
- #sound-dai-cells = <1>;
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
@@ -346,7 +344,7 @@ cpu {
sound-dai = <&lpass MI2S_QUATERNARY>;
};
codec {
- sound-dai = <&adv_bridge 0>;
+ sound-dai = <&adv_bridge>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
new file mode 100644
index 0000000..df8d6e5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "hamoa-iot-som.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
+ compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
+ chassis-type = "embedded";
+
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
+ 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>,
+ <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss0_sbu_mux>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss1_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss1_con_sbu_out>;
+ };
+ };
+ };
+ };
+
+ connector@2 {
+ compatible = "usb-c-connector";
+ reg = <2>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss2_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss2_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss2_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss2_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss2_con_sbu_out>;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ /* Left unused as the retimer is not used on this board. */
+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /*
+ * TODO: These two regulators are actually part of the removable M.2
+ * card and not the EVK mainboard. Need to describe this differently.
+ * Functionally it works correctly, because all we need to do is to
+ * turn on the actual 3.3V supply above.
+ */
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_wwan: regulator-wwan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDX_VPH_PWR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wwan_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ sound {
+ compatible = "qcom,x1e80100-sndcard";
+ model = "X1E80100-EVK";
+ audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+ "TweeterLeft IN", "WSA WSA_SPK2 OUT",
+ "WooferRight IN", "WSA2 WSA_SPK2 OUT",
+ "TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_woofer>,
+ <&left_tweeter>,
+ <&swr0 0>,
+ <&lpass_wsamacro 0>,
+ <&right_woofer>,
+ <&right_tweeter>,
+ <&swr3 0>,
+ <&lpass_wsa2macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ usb-1-ss0-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss0_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_sbu>;
+ };
+ };
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+ vdd-supply = <&vreg_rtmr2_1p15>;
+ vdd33-supply = <&vreg_rtmr2_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+ vddar-supply = <&vreg_rtmr2_1p15>;
+ vddat-supply = <&vreg_rtmr2_1p15>;
+ vddio-supply = <&vreg_rtmr2_1p8>;
+
+ reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr2_default>;
+ pinctrl-names = "default";
+
+ orientation-switch;
+ retimer-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss2_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss2_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss2_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ eusb3_repeater: redriver@47 {
+ compatible = "nxp,ptn3222";
+ reg = <0x47>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb3_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb5_repeater: redriver@43 {
+ compatible = "nxp,ptn3222";
+ reg = <0x43>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb5_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb6_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb6_reset_n>;
+ pinctrl-names = "default";
+ };
+};
+
+&i2c7 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+ vdd-supply = <&vreg_rtmr1_1p15>;
+ vdd33-supply = <&vreg_rtmr1_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+ vddar-supply = <&vreg_rtmr1_1p15>;
+ vddat-supply = <&vreg_rtmr1_1p15>;
+ vddio-supply = <&vreg_rtmr1_1p8>;
+
+ reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr1_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss1_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss1_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&lpass_tlmm {
+ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+ status = "okay";
+};
+
+&mdss_dp2_out {
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&vreg_edp_3p3>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ vddpe-3v3-supply = <&vreg_nvme>;
+};
+
+&pm8550_gpios {
+ rtmr0_default: rtmr0-reset-n-active-state {
+ pins = "gpio10";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+
+ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+ pins = "gpio11";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pm8550ve_9_gpios {
+ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pmc8380_5_gpios {
+ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&smb2360_0 {
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+ status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+ status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Left Woofer */
+ left_woofer: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "WooferLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Left Tweeter */
+ left_tweeter: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TweeterLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9385 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9385 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&swr3 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Right Woofer */
+ right_woofer: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "WooferRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Right Tweeter */
+ right_tweeter: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TweeterRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&tlmm {
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ eusb3_reset_n: eusb3-reset-n-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb5_reset_n: eusb5-reset-n-state {
+ pins = "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ output-low;
+ };
+
+ eusb6_reset_n: eusb6-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ output-low;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr1_default: rtmr1-reset-n-active-state {
+ pins = "gpio176";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr2_default: rtmr2-reset-n-active-state {
+ pins = "gpio185";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+ pins = "gpio188";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+ pins = "gpio186";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+ pins = "gpio189";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+ pins = "gpio126";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+ pins = "gpio187";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+ mode-pins {
+ pins = "gpio166";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ output-high;
+ };
+
+ oe-n-pins {
+ pins = "gpio168";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio167";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcn_bt_en: wcn-bt-en-state {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wwan_sw_en: wwan-sw-en-state {
+ pins = "gpio221";
+ function = "gpio";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ /* Switches USB signal routing between the USB connector and the Wi-Fi card. */
+ wcn_usb_sw_n: wcn-usb-sw-n-state {
+ pins = "gpio225";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
+};
+
+&uart21 {
+ compatible = "qcom,geni-debug-uart";
+
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+ phys = <&smb2360_0_eusb2_repeater>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+ phys = <&smb2360_1_eusb2_repeater>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_hsphy {
+ phys = <&smb2360_2_eusb2_repeater>;
+};
+
+&usb_1_ss2_qmpphy_out {
+ remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_2_hsphy {
+ phys = <&eusb5_repeater>;
+
+ pinctrl-0 = <&wcn_usb_sw_n>;
+ pinctrl-names = "default";
+};
+
+&usb_mp_hsphy0 {
+ phys = <&eusb3_repeater>;
+};
+
+&usb_mp_hsphy1 {
+ phys = <&eusb6_repeater>;
+};
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
new file mode 100644
index 0000000..1aead50
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+};
+
+&apps_rsc {
+ /* PMC8380C_B */
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PMC8380VE_C */
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PMC8380_D */
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PMC8380_E */
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PMC8380_F */
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PMC8380VE_I */
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PMC8380VE_J */
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&iris {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/adsp.mbn",
+ "qcom/x1e80100/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/cdsp.mbn",
+ "qcom/x1e80100/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* TPM LP & INT */
+ <44 4>; /* SPI (TPM) */
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+
+ };
+ };
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss2 {
+ status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index 43def95..df3cbb7 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -120,5 +120,6 @@ &usbphy0 {
};
&xo_board_clk {
- clock-frequency = <24000000>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
index 5bb021c..7a25af5 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
@@ -124,5 +124,6 @@ uart_pins: uart-pins-state {
};
&xo_board_clk {
- clock-frequency = <24000000>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 1303600..f024b3c 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -2,13 +2,15 @@
/*
* IPQ5018 SoC device tree source
*
- * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023-2025 The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/clock/qcom,apss-ipq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/clock/qcom,ipq5018-cmn-pll.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -16,14 +18,41 @@ / {
#size-cells = <2>;
clocks {
+ gephy_rx_clk: gephy-rx-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ #clock-cells = <0>;
+ };
+
+ gephy_tx_clk: gephy-tx-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ #clock-cells = <0>;
+ };
+
+ ref_96mhz_clk: ref-96mhz-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&xo_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <2>;
+ };
+
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
xo_board_clk: xo-board-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&ref_96mhz_clk>;
+ #clock-cells = <0>;
+ };
+
+ xo_clk: xo-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
+ clock-frequency = <48000000>;
};
};
@@ -39,6 +68,7 @@ cpu0: cpu@0 {
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -49,6 +79,7 @@ cpu1: cpu@1 {
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
};
l2_0: l2-cache {
@@ -182,6 +213,201 @@ pcie0_phy: phy@86000 {
status = "disabled";
};
+ mdio0: mdio@88000 {
+ compatible = "qcom,ipq5018-mdio";
+ reg = <0x00088000 0x64>,
+ <0x019475c4 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&gcc GCC_MDIO0_AHB_CLK>;
+ clock-names = "gcc_mdio_ahb_clk";
+
+ status = "disabled";
+
+ ge_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-id004d.d0c0";
+ reg = <7>;
+
+ resets = <&gcc GCC_GEPHY_MISC_ARES>;
+ };
+ };
+
+ mdio1: mdio@90000 {
+ compatible = "qcom,ipq5018-mdio";
+ reg = <0x00090000 0x64>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&gcc GCC_MDIO1_AHB_CLK>;
+ clock-names = "gcc_mdio_ahb_clk";
+
+ status = "disabled";
+ };
+
+ cmn_pll: clock-controller@9b000 {
+ compatible = "qcom,ipq5018-cmn-pll";
+ reg = <0x0009b000 0x800>;
+ clocks = <&ref_96mhz_clk>,
+ <&gcc GCC_CMN_BLK_AHB_CLK>,
+ <&gcc GCC_CMN_BLK_SYS_CLK>;
+ clock-names = "ref",
+ "ahb",
+ "sys";
+ #clock-cells = <1>;
+ assigned-clocks = <&cmn_pll IPQ5018_CMN_PLL_CLK>;
+ assigned-clock-rates-u64 = /bits/ 64 <9600000000>;
+ };
+
+ qfprom: qfprom@a0000 {
+ compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+ reg = <0x000a0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tsens_mode: mode@249 {
+ reg = <0x249 0x1>;
+ bits = <0 3>;
+ };
+
+ tsens_base1: base1@249 {
+ reg = <0x249 0x2>;
+ bits = <3 8>;
+ };
+
+ tsens_base2: base2@24a {
+ reg = <0x24a 0x2>;
+ bits = <3 8>;
+ };
+
+ tsens_s0_p1: s0-p1@24b {
+ reg = <0x24b 0x2>;
+ bits = <2 6>;
+ };
+
+ tsens_s0_p2: s0-p2@24c {
+ reg = <0x24c 0x1>;
+ bits = <1 6>;
+ };
+
+ tsens_s1_p1: s1-p1@24c {
+ reg = <0x24c 0x2>;
+ bits = <7 6>;
+ };
+
+ tsens_s1_p2: s1-p2@24d {
+ reg = <0x24d 0x2>;
+ bits = <5 6>;
+ };
+
+ tsens_s2_p1: s2-p1@24e {
+ reg = <0x24e 0x2>;
+ bits = <3 6>;
+ };
+
+ tsens_s2_p2: s2-p2@24f {
+ reg = <0x24f 0x1>;
+ bits = <1 6>;
+ };
+
+ tsens_s3_p1: s3-p1@24f {
+ reg = <0x24f 0x2>;
+ bits = <7 6>;
+ };
+
+ tsens_s3_p2: s3-p2@250 {
+ reg = <0x250 0x2>;
+ bits = <5 6>;
+ };
+
+ tsens_s4_p1: s4-p1@251 {
+ reg = <0x251 0x2>;
+ bits = <3 6>;
+ };
+
+ tsens_s4_p2: s4-p2@254 {
+ reg = <0x254 0x1>;
+ bits = <0 6>;
+ };
+ };
+
+ prng: rng@e3000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x000e3000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
+ reg = <0x004a9000 0x1000>,
+ <0x004a8000 0x1000>;
+
+ nvmem-cells = <&tsens_mode>,
+ <&tsens_base1>,
+ <&tsens_base2>,
+ <&tsens_s0_p1>,
+ <&tsens_s0_p2>,
+ <&tsens_s1_p1>,
+ <&tsens_s1_p2>,
+ <&tsens_s2_p1>,
+ <&tsens_s2_p2>,
+ <&tsens_s3_p1>,
+ <&tsens_s3_p2>,
+ <&tsens_s4_p1>,
+ <&tsens_s4_p2>;
+
+ nvmem-cell-names = "mode",
+ "base1",
+ "base2",
+ "s0_p1",
+ "s0_p2",
+ "s1_p1",
+ "s1_p2",
+ "s2_p1",
+ "s2_p2",
+ "s3_p1",
+ "s3_p2",
+ "s4_p1",
+ "s4_p2";
+
+ interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "uplow";
+ #qcom,sensors = <5>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ cryptobam: dma-controller@704000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0x00704000 0x20000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "bam_clk";
+
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@73a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0x0073a000 0x6000>;
+
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core";
+
+ dmas = <&cryptobam 2>,
+ <&cryptobam 3>;
+ dma-names = "rx",
+ "tx";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5018-tlmm";
reg = <0x01000000 0x300000>;
@@ -208,8 +434,8 @@ gcc: clock-controller@1800000 {
<&pcie0_phy>,
<&pcie1_phy>,
<0>,
- <0>,
- <0>,
+ <&gephy_rx_clk>,
+ <&gephy_tx_clk>,
<0>,
<0>;
#clock-cells = <1>;
@@ -264,6 +490,16 @@ blsp1_uart1: serial@78af000 {
status = "disabled";
};
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
@@ -278,6 +514,59 @@ blsp1_spi1: spi@78b5000 {
status = "disabled";
};
+ blsp1_i2c3: i2c@78b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b7000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ clock-frequency = <400000>;
+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ qpic_bam: dma-controller@7984000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0x07984000 0x1c000>;
+
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "bam_clk";
+
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
+ qpic_nand: spi@79b0000 {
+ compatible = "qcom,ipq5018-snand", "qcom,ipq9574-snand";
+ reg = <0x079b0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>,
+ <&gcc GCC_QPIC_IO_MACRO_CLK>;
+ clock-names = "core",
+ "aon",
+ "iom";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx",
+ "rx",
+ "cmd";
+
+ status = "disabled";
+ };
+
usb: usb@8af8800 {
compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
reg = <0x08af8800 0x400>;
@@ -453,7 +742,7 @@ pcie1: pcie@80000000 {
max-link-speed = <2>;
phys = <&pcie1_phy>;
- phy-names ="pciephy";
+ phy-names = "pciephy";
ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>,
<0x02000000 0 0x80300000 0x80300000 0 0x10000000>;
@@ -481,10 +770,10 @@ pcie1: pcie@80000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
<&gcc GCC_PCIE1_AXI_M_CLK>,
@@ -554,7 +843,7 @@ pcie0: pcie@a0000000 {
max-link-speed = <2>;
phys = <&pcie0_phy>;
- phy-names ="pciephy";
+ phy-names = "pciephy";
ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>,
<0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>;
@@ -582,10 +871,10 @@ pcie0: pcie@a0000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
@@ -631,6 +920,70 @@ pcie@0 {
};
};
+ thermal-zones {
+ cpu-thermal {
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+
+ cpu_alert: cpu-passive {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gephy-thermal {
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ gephy-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ top-glue-thermal {
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ top-glue-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ubi32-thermal {
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ ubi32-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index bd28c49..45fc512 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -632,10 +632,10 @@ pcie1: pcie@18000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 412 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 413 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 414 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 415 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
<&gcc GCC_PCIE3X2_AXI_S_CLK>,
@@ -736,10 +736,10 @@ pcie0: pcie@20000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
<&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index 1f89530..7386185 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -2,7 +2,7 @@
/*
* IPQ5424 RDP466 board device tree source
*
- * Copyright (c) 2024 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024-2025 The Linux Foundation. All rights reserved.
*/
/dts-v1/;
@@ -224,6 +224,13 @@ data-pins {
};
};
+ uart0_pins: uart0-default-state {
+ pins = "gpio10", "gpio11", "gpio12", "gpio13";
+ function = "uart0";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
pcie2_default_state: pcie2-default-state {
pins = "gpio31";
function = "gpio";
@@ -239,6 +246,17 @@ pcie3_default_state: pcie3-default-state {
};
};
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ /*
+ * The required initialization for this SE is not handled by the
+ * bootloader. Therefore, keep the device in "reserved" state until
+ * linux gains support for configuring the SE.
+ */
+ status = "reserved";
+};
+
&uart1 {
pinctrl-0 = <&uart1_pins>;
pinctrl-names = "default";
@@ -253,6 +271,26 @@ &usb3 {
status = "okay";
};
+/*
+ * The bootstrap pins for the board select the XO clock frequency that
+ * supports 48 MHZ, 96 MHZ or 192 MHZ. This setting automatically
+ * enables the right dividers, to ensure the reference clock output
+ * from WiFi to the CMN PLL is 48 MHZ.
+ */
+&ref_48mhz_clk {
+ clock-div = <1>;
+ clock-mult = <1>;
+};
+
+/*
+ * The frequency of xo_board is fixed to 24 MHZ, which is routed
+ * from WiFi output clock 48 MHZ divided by 2.
+ */
&xo_board {
- clock-frequency = <24000000>;
+ clock-div = <2>;
+ clock-mult = <1>;
+};
+
+&xo_clk {
+ clock-frequency = <48000000>;
};
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 66bd226..ef2b52f3 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -3,10 +3,12 @@
* IPQ5424 device tree source
*
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
#include <dt-bindings/clock/qcom,ipq5424-gcc.h>
#include <dt-bindings/reset/qcom,ipq5424-gcc.h>
#include <dt-bindings/interconnect/qcom,ipq5424.h>
@@ -18,12 +20,24 @@ / {
interrupt-parent = <&intc>;
clocks {
+ ref_48mhz_clk: ref-48mhz-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&xo_clk>;
+ #clock-cells = <0>;
+ };
+
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
xo_board: xo-board-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&ref_48mhz_clk>;
+ #clock-cells = <0>;
+ };
+
+ xo_clk: xo-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
@@ -39,6 +53,11 @@ cpu0: cpu@0 {
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&l2_0>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -59,6 +78,10 @@ cpu1: cpu@100 {
enable-method = "psci";
reg = <0x100>;
next-level-cache = <&l2_100>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
l2_100: l2-cache {
compatible = "cache";
@@ -74,6 +97,10 @@ cpu2: cpu@200 {
enable-method = "psci";
reg = <0x200>;
next-level-cache = <&l2_200>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
l2_200: l2-cache {
compatible = "cache";
@@ -89,6 +116,10 @@ cpu3: cpu@300 {
enable-method = "psci";
reg = <0x300>;
next-level-cache = <&l2_300>;
+ clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
l2_300: l2-cache {
compatible = "cache";
@@ -106,6 +137,36 @@ scm {
};
};
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2-kryo-cpu";
+ opp-shared;
+ nvmem-cells = <&cpu_speed_bin>;
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <850000>;
+ opp-supported-hw = <0x3>;
+ clock-latency-ns = <200000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <850000>;
+ opp-supported-hw = <0x3>;
+ clock-latency-ns = <200000>;
+ opp-peak-kBps = <984000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1000000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ opp-peak-kBps = <1272000>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
@@ -150,6 +211,12 @@ smem@8a800000 {
hwlocks = <&tcsr_mutex 3>;
};
+
+ tfa@8a832000 {
+ reg = <0x0 0x8a832000 0x0 0x7d000>;
+ no-map;
+ status = "disabled";
+ };
};
soc@0 {
@@ -210,6 +277,18 @@ pcie1_phy: phy@8c000 {
status = "disabled";
};
+ cmn_pll: clock-controller@9b000 {
+ compatible = "qcom,ipq5424-cmn-pll";
+ reg = <0 0x0009b000 0 0x800>;
+ clocks = <&ref_48mhz_clk>,
+ <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+ <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+ clock-names = "ref", "ahb", "sys";
+ #clock-cells = <1>;
+ assigned-clocks = <&cmn_pll IPQ5424_CMN_PLL_CLK>;
+ assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+ };
+
efuse@a4000 {
compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
reg = <0 0x000a4000 0 0x741>;
@@ -363,6 +442,18 @@ system-cache-controller@800000 {
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
};
+ qfprom@a6000 {
+ compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+ reg = <0x0 0x000a6000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_speed_bin: cpu-speed-bin@234 {
+ reg = <0x234 0x1>;
+ bits = <0 8>;
+ };
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5424-tlmm";
reg = <0 0x01000000 0 0x300000>;
@@ -417,6 +508,15 @@ qupv3: geniqup@1ac0000 {
#address-cells = <2>;
#size-cells = <2>;
+ uart0: serial@1a80000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x01a80000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_UART0_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
uart1: serial@1a84000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x01a84000 0 0x4000>;
@@ -471,6 +571,7 @@ intc: interrupt-controller@f200000 {
compatible = "arm,gic-v3";
reg = <0 0xf200000 0 0x10000>, /* GICD */
<0 0xf240000 0 0x80000>; /* GICR * 4 regions */
+ #address-cells = <0>;
#interrupt-cells = <0x3>;
interrupt-controller;
#redistributor-regions = <1>;
@@ -705,6 +806,15 @@ frame@f42d000 {
};
};
+ apss_clk: clock-controller@fa80000 {
+ compatible = "qcom,ipq5424-apss-clk";
+ reg = <0x0 0x0fa80000 0x0 0x20000>;
+ clocks = <&xo_board>,
+ <&gcc GPLL0>;
+ #clock-cells = <1>;
+ #interconnect-cells = <1>;
+ };
+
pcie3: pcie@40000000 {
compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
reg = <0x0 0x40000000 0x0 0xf1c>,
@@ -752,10 +862,10 @@ pcie3: pcie@40000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 479 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 480 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 481 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 482 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
<&gcc GCC_PCIE3_AXI_S_CLK>,
@@ -855,10 +965,10 @@ pcie2: pcie@50000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 464 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 465 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 466 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 467 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
<&gcc GCC_PCIE2_AXI_S_CLK>,
@@ -958,10 +1068,10 @@ pcie1: pcie@60000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 449 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 450 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 451 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 452 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
<&gcc GCC_PCIE1_AXI_S_CLK>,
@@ -1061,10 +1171,10 @@ pcie0: pcie@70000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 436 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 437 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index bfe59b0..40f1c26 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -906,10 +906,10 @@ pcie0: pcie@20000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index fffb47e..256e12c 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -867,13 +867,13 @@ pcie1: pcie@10000000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 142
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 143
+ <0 0 0 2 &intc 0 GIC_SPI 143
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 144
+ <0 0 0 3 &intc 0 GIC_SPI 144
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 145
+ <0 0 0 4 &intc 0 GIC_SPI 145
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -955,13 +955,13 @@ pcie0: pcie@20000000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 75
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 78
+ <0 0 0 2 &intc 0 GIC_SPI 78
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 79
+ <0 0 0 3 &intc 0 GIC_SPI 79
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 83
+ <0 0 0 4 &intc 0 GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index fa7bb52..5a546a1 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -128,36 +128,4 @@ wake-n-pins {
bias-pull-up;
};
};
-
- sdc_default_state: sdc-default-state {
- clk-pins {
- pins = "gpio5";
- function = "sdc_clk";
- drive-strength = <8>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio4";
- function = "sdc_cmd";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio0", "gpio1", "gpio2",
- "gpio3", "gpio6", "gpio7",
- "gpio8", "gpio9";
- function = "sdc_data";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- rclk-pins {
- pins = "gpio10";
- function = "sdc_rclk";
- drive-strength = <8>;
- bias-pull-down;
- };
- };
};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 815b5f9..86c9cb9 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -946,10 +946,10 @@ pcie1: pcie@10000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
<&gcc GCC_PCIE1_AXI_S_CLK>,
@@ -1032,10 +1032,10 @@ pcie3: pcie@18000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
<&gcc GCC_PCIE3_AXI_S_CLK>,
@@ -1118,10 +1118,10 @@ pcie2: pcie@20000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
<&gcc GCC_PCIE2_AXI_S_CLK>,
@@ -1161,7 +1161,7 @@ pcie2: pcie@20000000 {
status = "disabled";
};
- pcie0: pci@28000000 {
+ pcie0: pcie@28000000 {
compatible = "qcom,pcie-ipq9574";
reg = <0x28000000 0xf1d>,
<0x28000f20 0xa8>,
@@ -1203,10 +1203,10 @@ pcie0: pci@28000000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/lemans-auto.dtsi b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
new file mode 100644
index 0000000..8db958d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "lemans.dtsi"
+
+/delete-node/ &pil_camera_mem;
+/delete-node/ &pil_adsp_mem;
+/delete-node/ &q6_adsp_dtb_mem;
+/delete-node/ &q6_gdsp0_dtb_mem;
+/delete-node/ &pil_gdsp0_mem;
+/delete-node/ &pil_gdsp1_mem;
+/delete-node/ &q6_gdsp1_dtb_mem;
+/delete-node/ &q6_cdsp0_dtb_mem;
+/delete-node/ &pil_cdsp0_mem;
+/delete-node/ &pil_gpu_mem;
+/delete-node/ &pil_cdsp1_mem;
+/delete-node/ &q6_cdsp1_dtb_mem;
+/delete-node/ &pil_cvp_mem;
+/delete-node/ &pil_video_mem;
+/delete-node/ &gunyah_md_mem;
+
+/ {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz_ffi_mem: tz-ffi@91c00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x91c00000 0x0 0x1400000>;
+ no-map;
+ };
+
+ pil_camera_mem: pil-camera@95200000 {
+ reg = <0x0 0x95200000 0x0 0x500000>;
+ no-map;
+ };
+
+ pil_adsp_mem: pil-adsp@95c00000 {
+ reg = <0x0 0x95c00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gdsp0_mem: pil-gdsp0@97b00000 {
+ reg = <0x0 0x97b00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gdsp1_mem: pil-gdsp1@99900000 {
+ reg = <0x0 0x99900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_cdsp0_mem: pil-cdsp0@9b800000 {
+ reg = <0x0 0x9b800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gpu_mem: pil-gpu@9d600000 {
+ reg = <0x0 0x9d600000 0x0 0x2000>;
+ no-map;
+ };
+
+ pil_cdsp1_mem: pil-cdsp1@9d700000 {
+ reg = <0x0 0x9d700000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_cvp_mem: pil-cvp@9f500000 {
+ reg = <0x0 0x9f500000 0x0 0x700000>;
+ no-map;
+ };
+
+ pil_video_mem: pil-video@9fc00000 {
+ reg = <0x0 0x9fc00000 0x0 0x700000>;
+ no-map;
+ };
+
+ audio_mdf_mem: audio-mdf-region@ae000000 {
+ reg = <0x0 0xae000000 0x0 0x1000000>;
+ no-map;
+ };
+
+ hyptz_reserved_mem: hyptz-reserved@beb00000 {
+ reg = <0x0 0xbeb00000 0x0 0x11500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted-apps@d1900000 {
+ reg = <0x0 0xd1900000 0x0 0x3800000>;
+ no-map;
+ };
+ };
+
+ firmware {
+ scm {
+ memory-region = <&tz_ffi_mem>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
new file mode 100644
index 0000000..769befa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ vreg_cam1_1p8: regulator-cam1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_cam1";
+ startup-delay-us = <10000>;
+ enable-active-high;
+ gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&camss {
+ vdda-pll-supply = <&vreg_l1c>;
+ vdda-phy-supply = <&vreg_l4a>;
+
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ csiphy1_ep: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&imx577_ep1>;
+ };
+ };
+ };
+};
+
+&cci1 {
+ pinctrl-0 = <&cci1_0_default>;
+ pinctrl-1 = <&cci1_0_sleep>;
+
+ status = "okay";
+};
+
+&cci1_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx577";
+ reg = <0x1a>;
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&cam1_default>;
+ pinctrl-names = "default";
+
+ clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clock-rates = <24000000>;
+
+ dovdd-supply = <&vreg_s4a>;
+ avdd-supply = <&vreg_cam1_1p8>;
+
+ port {
+ imx577_ep1: endpoint {
+ clock-lanes = <7>;
+ link-frequencies = /bits/ 64 <600000000>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&csiphy1_ep>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ cam1_default: cam1-default-state {
+ mclk-pins {
+ pins = "gpio73";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rst-pins {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
new file mode 100644
index 0000000..c7dc9b8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -0,0 +1,776 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. Lemans EVK";
+ compatible = "qcom,lemans-evk", "qcom,qcs9100", "qcom,sa8775p";
+
+ aliases {
+ ethernet0 = ðernet0;
+ mmc1 = &sdhc;
+ serial0 = &uart10;
+ };
+
+ dmic: audio-codec-0 {
+ compatible = "dmic-codec";
+ #sound-dai-cells = <0>;
+ num-channels = <1>;
+ };
+
+ max98357a: audio-codec-1 {
+ compatible = "maxim,max98357a";
+ #sound-dai-cells = <0>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ edp0-connector {
+ compatible = "dp-connector";
+ label = "EDP0";
+ type = "mini";
+
+ port {
+ edp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp0_out>;
+ };
+ };
+ };
+
+ edp1-connector {
+ compatible = "dp-connector";
+ label = "EDP1";
+ type = "mini";
+
+ port {
+ edp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp1_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "qcom,qcs9100-sndcard";
+ model = "LEMANS-EVK";
+
+ pinctrl-0 = <&hs0_mi2s_active>, <&hs2_mi2s_active>;
+ pinctrl-names = "default";
+
+ hs0-mi2s-playback-dai-link {
+ link-name = "HS0 MI2S Playback";
+
+ codec {
+ sound-dai = <&max98357a>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ hs2-mi2s-capture-dai-link {
+ link-name = "HS2 MI2S Capture";
+
+ codec {
+ sound-dai = <&dmic>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TERTIARY_MI2S_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ vmmc_sdc: regulator-vmmc-sdc {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vmmc_sdc";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ vreg_sdc: regulator-vreg-sdc {
+ compatible = "regulator-gpio";
+
+ regulator-name = "vreg_sdc";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpios = <&expander1 7 GPIO_ACTIVE_HIGH>;
+ states = <1800000 1>, <2950000 0>;
+
+ startup-delay-us = <100>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1816000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a: smps5 {
+ regulator-name = "vreg_s5a";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1996000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9a: smps9 {
+ regulator-name = "vreg_s9a";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c: ldo5 {
+ regulator-name = "vreg_l5c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vreg_s4e: smps4 {
+ regulator-name = "vreg_s4e";
+ regulator-min-microvolt = <970000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s7e: smps7 {
+ regulator-name = "vreg_s7e";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9e: smps9 {
+ regulator-name = "vreg_s9e";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <570000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6e: ldo6 {
+ regulator-name = "vreg_l6e";
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8e: ldo8 {
+ regulator-name = "vreg_l8e";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+ðernet0 {
+ phy-handle = <&hsgmii_phy0>;
+ phy-mode = "2500base-x";
+
+ pinctrl-0 = <ðernet0_default>;
+ pinctrl-names = "default";
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+
+ nvmem-cells = <&mac_addr0>;
+ nvmem-cell-names = "mac-address";
+
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hsgmii_phy0: ethernet-phy@1c {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <0x1c>;
+ reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&i2c18 {
+ status = "okay";
+
+ expander0: gpio@38 {
+ compatible = "ti,tca9538";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander1: gpio@39 {
+ compatible = "ti,tca9538";
+ reg = <0x39>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander2: gpio@3a {
+ compatible = "ti,tca9538";
+ reg = <0x3a>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander3: gpio@3b {
+ compatible = "ti,tca9538";
+ reg = <0x3b>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ eeprom@50 {
+ compatible = "giantec,gt24c256c", "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_addr0: mac-addr@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+ };
+};
+
+&iris {
+ firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn";
+
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp0 {
+ pinctrl-0 = <&dp0_hot_plug_det>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&mdss0_dp1 {
+ pinctrl-0 = <&dp1_hot_plug_det>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&pcie0 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8775p/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp0 {
+ firmware-name = "qcom/sa8775p/cdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp1 {
+ firmware-name = "qcom/sa8775p/cdsp1.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+ firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+ firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+
+ status = "okay";
+};
+
+&sdhc {
+ vmmc-supply = <&vmmc_sdc>;
+ vqmmc-supply = <&vreg_sdc>;
+
+ pinctrl-0 = <&sdc_default>, <&sd_cd>;
+ pinctrl-1 = <&sdc_sleep>, <&sd_cd>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+ no-mmc;
+ no-sdio;
+
+ status = "okay";
+};
+
+&serdes0 {
+ phy-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32768>;
+};
+
+&tlmm {
+ ethernet0_default: ethernet0-default-state {
+ ethernet0_mdc: ethernet0-mdc-pins {
+ pins = "gpio8";
+ function = "emac0_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet0_mdio: ethernet0-mdio-pins {
+ pins = "gpio9";
+ function = "emac0_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ clkreq-pins {
+ pins = "gpio1";
+ function = "pcie0_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio0";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ clkreq-pins {
+ pins = "gpio3";
+ function = "pcie1_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sd_cd: sd-cd-state {
+ pins = "gpio36";
+ function = "gpio";
+ bias-pull-up;
+ };
+};
+
+&uart10 {
+ compatible = "qcom,geni-debug-uart";
+ pinctrl-0 = <&qup_uart10_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l8a>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l4c>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&usb_0 {
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l1c>;
+ vdda-pll-supply = <&vreg_l7a>;
+
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
rename to arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
similarity index 87%
rename from arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
rename to arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 63b3031..c69aa2f 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -3,18 +3,11 @@
* Copyright (c) 2023, Linaro Limited
*/
-/dts-v1/;
-
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
-
/ {
aliases {
- ethernet0 = ðernet0;
- ethernet1 = ðernet1;
i2c11 = &i2c11;
i2c18 = &i2c18;
serial0 = &uart10;
@@ -443,151 +436,6 @@ vreg_l8e: ldo8 {
};
};
-ðernet0 {
- phy-handle = <&sgmii_phy0>;
-
- pinctrl-0 = <ðernet0_default>;
- pinctrl-names = "default";
-
- snps,mtl-rx-config = <&mtl_rx_setup>;
- snps,mtl-tx-config = <&mtl_tx_setup>;
- snps,ps-speed = <1000>;
-
- status = "okay";
-
- mdio: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <4>;
- snps,rx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,route-up;
- snps,priority = <0x1>;
- };
-
- queue1 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x1>;
- snps,route-ptp;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x2>;
- snps,route-avcp;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x3>;
- snps,priority = <0xc>;
- };
- };
-
- mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <4>;
-
- queue0 {
- snps,dcb-algorithm;
- };
-
- queue1 {
- snps,dcb-algorithm;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
- };
-};
-
-ðernet1 {
- phy-handle = <&sgmii_phy1>;
-
- snps,mtl-rx-config = <&mtl_rx_setup1>;
- snps,mtl-tx-config = <&mtl_tx_setup1>;
- snps,ps-speed = <1000>;
-
- status = "okay";
-
- mtl_rx_setup1: rx-queues-config {
- snps,rx-queues-to-use = <4>;
- snps,rx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,route-up;
- snps,priority = <0x1>;
- };
-
- queue1 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x1>;
- snps,route-ptp;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x2>;
- snps,route-avcp;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,map-to-dma-channel = <0x3>;
- snps,priority = <0xc>;
- };
- };
-
- mtl_tx_setup1: tx-queues-config {
- snps,tx-queues-to-use = <4>;
-
- queue0 {
- snps,dcb-algorithm;
- };
-
- queue1 {
- snps,dcb-algorithm;
- };
-
- queue2 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
-
- queue3 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3e800>;
- snps,low_credit = <0xffc18000>;
- };
- };
-};
-
&i2c11 {
clock-frequency = <400000>;
status = "okay";
@@ -960,22 +808,6 @@ dp1_hot_plug_det: dp1-hot-plug-det-state {
bias-disable;
};
- ethernet0_default: ethernet0-default-state {
- ethernet0_mdc: ethernet0-mdc-pins {
- pins = "gpio8";
- function = "emac0_mdc";
- drive-strength = <16>;
- bias-pull-up;
- };
-
- ethernet0_mdio: ethernet0-mdio-pins {
- pins = "gpio9";
- function = "emac0_mdio";
- drive-strength = <16>;
- bias-pull-up;
- };
- };
-
io_expander_intr_active: io-expander-intr-active-state {
pins = "gpio98";
function = "gpio";
@@ -1165,14 +997,11 @@ &ufs_mem_phy {
&usb_0 {
pinctrl-names = "default";
pinctrl-0 = <&usb0_en_state>;
+ dr_mode = "peripheral";
status = "okay";
};
-&usb_0_dwc3 {
- dr_mode = "peripheral";
-};
-
&usb_0_hsphy {
vdda-pll-supply = <&vreg_l7a>;
vdda18-supply = <&vreg_l6c>;
@@ -1191,14 +1020,11 @@ &usb_0_qmpphy {
&usb_1 {
pinctrl-names = "default";
pinctrl-0 = <&usb1_en_state>;
+ dr_mode = "host";
status = "okay";
};
-&usb_1_dwc3 {
- dr_mode = "host";
-};
-
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l7a>;
vdda18-supply = <&vreg_l6c>;
@@ -1217,14 +1043,11 @@ &usb_1_qmpphy {
&usb_2 {
pinctrl-names = "default";
pinctrl-0 = <&usb2_en_state>;
+ dr_mode = "host";
status = "okay";
};
-&usb_2_dwc3 {
- dr_mode = "host";
-};
-
&usb_2_hsphy {
vdda-pll-supply = <&vreg_l7a>;
vdda18-supply = <&vreg_l6c>;
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
new file mode 100644
index 0000000..9d6bbe1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride boards.
+ * It supports 2x 1G - SGMII (Marvell 88EA1512-B2) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ aliases {
+ ethernet0 = ðernet0;
+ ethernet1 = ðernet1;
+ };
+};
+
+&tlmm {
+ ethernet0_default: ethernet0-default-state {
+ ethernet0_mdc: ethernet0-mdc-pins {
+ pins = "gpio8";
+ function = "emac0_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet0_mdio: ethernet0-mdio-pins {
+ pins = "gpio9";
+ function = "emac0_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+};
+
+ðernet0 {
+ phy-handle = <&sgmii_phy0>;
+ phy-mode = "sgmii";
+
+ pinctrl-0 = <ðernet0_default>;
+ pinctrl-names = "default";
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,ps-speed = <1000>;
+
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sgmii_phy0: phy@8 {
+ compatible = "ethernet-phy-id0141.0dd4";
+ reg = <0x8>;
+ device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+
+ sgmii_phy1: phy@a {
+ compatible = "ethernet-phy-id0141.0dd4";
+ reg = <0xa>;
+ device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+ðernet1 {
+ phy-handle = <&sgmii_phy1>;
+ phy-mode = "sgmii";
+
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+ snps,ps-speed = <1000>;
+
+ status = "okay";
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
new file mode 100644
index 0000000..2d2d9ee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride r3 boards.
+ * It supports 2x 2.5G - HSGMII (Marvell hsgmii) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ aliases {
+ ethernet0 = ðernet0;
+ ethernet1 = ðernet1;
+ };
+};
+
+&tlmm {
+ ethernet0_default: ethernet0-default-state {
+ ethernet0_mdc: ethernet0-mdc-pins {
+ pins = "gpio8";
+ function = "emac0_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet0_mdio: ethernet0-mdio-pins {
+ pins = "gpio9";
+ function = "emac0_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+};
+
+ðernet0 {
+ phy-handle = <&hsgmii_phy0>;
+ phy-mode = "2500base-x";
+
+ pinctrl-0 = <ðernet0_default>;
+ pinctrl-names = "default";
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,ps-speed = <1000>;
+
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hsgmii_phy0: phy@8 {
+ compatible = "ethernet-phy-id31c3.1c33";
+ reg = <0x8>;
+ device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+
+ hsgmii_phy1: phy@0 {
+ compatible = "ethernet-phy-id31c3.1c33";
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+ðernet1 {
+ phy-handle = <&hsgmii_phy1>;
+ phy-mode = "2500base-x";
+
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+ snps,ps-speed = <1000>;
+
+ status = "okay";
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
similarity index 89%
rename from arch/arm64/boot/dts/qcom/sa8775p.dtsi
rename to arch/arm64/boot/dts/qcom/lemans.dtsi
index fed3471..cf685cb 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -12,13 +12,14 @@
#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@@ -514,7 +515,6 @@ firmware {
scm {
compatible = "qcom,scm-sa8775p", "qcom,scm";
qcom,dload-mode = <&tcsr 0x13000>;
- memory-region = <&tz_ffi_mem>;
};
};
@@ -773,6 +773,11 @@ sail_ota_mem: sail-ss@90e00000 {
no-map;
};
+ gunyah_md_mem: gunyah-md@91a80000 {
+ reg = <0x0 0x91a80000 0x0 0x80000>;
+ no-map;
+ };
+
aoss_backup_mem: aoss-backup@91b00000 {
reg = <0x0 0x91b00000 0x0 0x40000>;
no-map;
@@ -798,12 +803,6 @@ cdt_data_backup_mem: cdt-data-backup@91ba0000 {
no-map;
};
- tz_ffi_mem: tz-ffi@91c00000 {
- compatible = "shared-dma-pool";
- reg = <0x0 0x91c00000 0x0 0x1400000>;
- no-map;
- };
-
lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
reg = <0x0 0x93b00000 0x0 0xf00000>;
no-map;
@@ -815,52 +814,72 @@ adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 {
};
pil_camera_mem: pil-camera@95200000 {
- reg = <0x0 0x95200000 0x0 0x500000>;
+ reg = <0x0 0x95200000 0x0 0x700000>;
no-map;
};
- pil_adsp_mem: pil-adsp@95c00000 {
- reg = <0x0 0x95c00000 0x0 0x1e00000>;
+ pil_adsp_mem: pil-adsp@95900000 {
+ reg = <0x0 0x95900000 0x0 0x1e00000>;
no-map;
};
- pil_gdsp0_mem: pil-gdsp0@97b00000 {
- reg = <0x0 0x97b00000 0x0 0x1e00000>;
+ q6_adsp_dtb_mem: q6-adsp-dtb@97700000 {
+ reg = <0x0 0x97700000 0x0 0x80000>;
no-map;
};
- pil_gdsp1_mem: pil-gdsp1@99900000 {
- reg = <0x0 0x99900000 0x0 0x1e00000>;
+ q6_gdsp0_dtb_mem: q6-gdsp0-dtb@97780000 {
+ reg = <0x0 0x97780000 0x0 0x80000>;
no-map;
};
- pil_cdsp0_mem: pil-cdsp0@9b800000 {
- reg = <0x0 0x9b800000 0x0 0x1e00000>;
+ pil_gdsp0_mem: pil-gdsp0@97800000 {
+ reg = <0x0 0x97800000 0x0 0x1e00000>;
no-map;
};
- pil_gpu_mem: pil-gpu@9d600000 {
- reg = <0x0 0x9d600000 0x0 0x2000>;
+ pil_gdsp1_mem: pil-gdsp1@99600000 {
+ reg = <0x0 0x99600000 0x0 0x1e00000>;
no-map;
};
- pil_cdsp1_mem: pil-cdsp1@9d700000 {
- reg = <0x0 0x9d700000 0x0 0x1e00000>;
+ q6_gdsp1_dtb_mem: q6-gdsp1-dtb@9b400000 {
+ reg = <0x0 0x9b400000 0x0 0x80000>;
no-map;
};
- pil_cvp_mem: pil-cvp@9f500000 {
- reg = <0x0 0x9f500000 0x0 0x700000>;
+ q6_cdsp0_dtb_mem: q6-cdsp0-dtb@9b480000 {
+ reg = <0x0 0x9b480000 0x0 0x80000>;
no-map;
};
- pil_video_mem: pil-video@9fc00000 {
- reg = <0x0 0x9fc00000 0x0 0x700000>;
+ pil_cdsp0_mem: pil-cdsp0@9b500000 {
+ reg = <0x0 0x9b500000 0x0 0x1e00000>;
no-map;
};
- audio_mdf_mem: audio-mdf-region@ae000000 {
- reg = <0x0 0xae000000 0x0 0x1000000>;
+ pil_gpu_mem: pil-gpu@9d300000 {
+ reg = <0x0 0x9d300000 0x0 0x2000>;
+ no-map;
+ };
+
+ q6_cdsp1_dtb_mem: q6-cdsp1-dtb@9d380000 {
+ reg = <0x0 0x9d380000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_cdsp1_mem: pil-cdsp1@9d400000 {
+ reg = <0x0 0x9d400000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_cvp_mem: pil-cvp@9f200000 {
+ reg = <0x0 0x9f200000 0x0 0x700000>;
+ no-map;
+ };
+
+ pil_video_mem: pil-video@9f900000 {
+ reg = <0x0 0x9f900000 0x0 0x1000000>;
no-map;
};
@@ -869,11 +888,6 @@ firmware_mem: firmware-region@b0000000 {
no-map;
};
- hyptz_reserved_mem: hyptz-reserved@beb00000 {
- reg = <0x0 0xbeb00000 0x0 0x11500000>;
- no-map;
- };
-
scmi_mem: scmi-region@d0000000 {
reg = <0x0 0xd0000000 0x0 0x40000>;
no-map;
@@ -915,7 +929,7 @@ deepsleep_backup_mem: deepsleep-backup@d1800000 {
};
trusted_apps_mem: trusted-apps@d1900000 {
- reg = <0x0 0xd1900000 0x0 0x3800000>;
+ reg = <0x0 0xd1900000 0x0 0x1c00000>;
no-map;
};
@@ -3822,6 +3836,58 @@ apss_tpdm2_out: endpoint {
};
};
+ sdhc: mmc@87c4000 {
+ compatible = "qcom,sa8775p-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0 0x087c4000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>;
+ clock-names = "iface",
+ "core";
+
+ interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ iommus = <&apps_smmu 0x0 0x0>;
+ dma-coherent;
+
+ operating-points-v2 = <&sdhc_opp_table>;
+ power-domains = <&rpmhpd SA8775P_CX>;
+ resets = <&gcc GCC_SDCC1_BCR>;
+
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+
+ status = "disabled";
+
+ sdhc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <1800000 400000>;
+ opp-avg-kBps = <100000 0>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <5400000 1600000>;
+ opp-avg-kBps = <390000 0>;
+ };
+ };
+ };
+
usb_0_hsphy: phy@88e4000 {
compatible = "qcom,sa8775p-usb-hs-phy",
"qcom,usb-snps-hs-5nm-phy";
@@ -3859,12 +3925,9 @@ usb_0_qmpphy: phy@88e8000 {
status = "disabled";
};
- usb_0: usb@a6f8800 {
- compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_0: usb@a600000 {
+ compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a600000 0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -3877,12 +3940,14 @@ usb_0: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -3899,18 +3964,13 @@ usb_0: usb@a6f8800 {
wakeup-source;
- status = "disabled";
+ iommus = <&apps_smmu 0x080 0x0>;
+ phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
- usb_0_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xe000>;
- interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x080 0x0>;
- phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- };
+ status = "disabled";
};
usb_1_hsphy: phy@88e6000 {
@@ -3950,12 +4010,9 @@ usb_1_qmpphy: phy@88ea000 {
status = "disabled";
};
- usb_1: usb@a8f8800 {
- compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
- reg = <0 0x0a8f8800 0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_1: usb@a800000 {
+ compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a800000 0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -3968,12 +4025,14 @@ usb_1: usb@a8f8800 {
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 8 IRQ_TYPE_EDGE_BOTH>,
<&pdc 7 IRQ_TYPE_EDGE_BOTH>,
<&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -3990,18 +4049,13 @@ usb_1: usb@a8f8800 {
wakeup-source;
- status = "disabled";
+ iommus = <&apps_smmu 0x0a0 0x0>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
- usb_1_dwc3: usb@a800000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a800000 0 0xe000>;
- interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x0a0 0x0>;
- phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- };
+ status = "disabled";
};
usb_2_hsphy: phy@88e7000 {
@@ -4017,12 +4071,9 @@ usb_2_hsphy: phy@88e7000 {
status = "disabled";
};
- usb_2: usb@a4f8800 {
- compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
- reg = <0 0x0a4f8800 0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_2: usb@a400000 {
+ compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a400000 0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
<&gcc GCC_USB20_MASTER_CLK>,
@@ -4035,11 +4086,13 @@ usb_2: usb@a4f8800 {
<&gcc GCC_USB20_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 10 IRQ_TYPE_EDGE_BOTH>,
<&pdc 9 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq";
@@ -4055,18 +4108,13 @@ usb_2: usb@a4f8800 {
wakeup-source;
- status = "disabled";
+ iommus = <&apps_smmu 0x020 0x0>;
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
- usb_2_dwc3: usb@a400000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a400000 0 0xe000>;
- interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x020 0x0>;
- phys = <&usb_2_hsphy>;
- phy-names = "usb2-phy";
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- };
+ status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
@@ -4345,6 +4393,346 @@ videocc: clock-controller@abf0000 {
#power-domain-cells = <1>;
};
+ cci0: cci@ac13000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac13000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac14000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac14000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+ pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac15000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci3: cci@ac16000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_3_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+ pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci3_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci3_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ camss: isp@ac78000 {
+ compatible = "qcom,sa8775p-camss";
+
+ reg = <0x0 0xac78000 0x0 0x1000>,
+ <0x0 0xac7a000 0x0 0x0f00>,
+ <0x0 0xac7c000 0x0 0x0f00>,
+ <0x0 0xac84000 0x0 0x0f00>,
+ <0x0 0xac88000 0x0 0x0f00>,
+ <0x0 0xac8c000 0x0 0x0f00>,
+ <0x0 0xac90000 0x0 0x0f00>,
+ <0x0 0xac94000 0x0 0x0f00>,
+ <0x0 0xac9c000 0x0 0x2000>,
+ <0x0 0xac9e000 0x0 0x2000>,
+ <0x0 0xaca0000 0x0 0x2000>,
+ <0x0 0xaca2000 0x0 0x2000>,
+ <0x0 0xacac000 0x0 0x0400>,
+ <0x0 0xacad000 0x0 0x0400>,
+ <0x0 0xacae000 0x0 0x0400>,
+ <0x0 0xac4d000 0x0 0xd000>,
+ <0x0 0xac5a000 0x0 0xd000>,
+ <0x0 0xac85000 0x0 0x0d00>,
+ <0x0 0xac89000 0x0 0x0d00>,
+ <0x0 0xac8d000 0x0 0x0d00>,
+ <0x0 0xac91000 0x0 0x0d00>,
+ <0x0 0xac95000 0x0 0x0d00>;
+ reg-names = "csid_wrapper",
+ "csid0",
+ "csid1",
+ "csid_lite0",
+ "csid_lite1",
+ "csid_lite2",
+ "csid_lite3",
+ "csid_lite4",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "tpg0",
+ "tpg1",
+ "tpg2",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1",
+ "vfe_lite2",
+ "vfe_lite3",
+ "vfe_lite4";
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CORE_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_ICP_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+ clock-names = "camnoc_axi",
+ "core_ahb",
+ "cpas_ahb",
+ "cpas_fast_ahb_clk",
+ "cpas_vfe_lite",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "csid",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy_rx",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "icp_ahb",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid_lite0",
+ "csid_lite1",
+ "csid_lite2",
+ "csid_lite3",
+ "csid_lite4",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "tpg0",
+ "tpg1",
+ "tpg2",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1",
+ "vfe_lite2",
+ "vfe_lite3",
+ "vfe_lite4";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_0";
+
+ iommus = <&apps_smmu 0x3400 0x20>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+ };
+ };
+
camcc: clock-controller@ade0000 {
compatible = "qcom,sa8775p-camcc";
reg = <0x0 0x0ade0000 0x0 0x20000>;
@@ -4405,7 +4793,7 @@ mdss0_mdp: display-controller@ae01000 {
<&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
<&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "bus",
+ clock-names = "nrt_bus",
"iface",
"lut",
"core",
@@ -4682,7 +5070,11 @@ mdss0_dp0: displayport-controller@af54000 {
<0x0 0x0af54200 0x0 0x0c0>,
<0x0 0x0af55000 0x0 0x770>,
<0x0 0x0af56000 0x0 0x09c>,
- <0x0 0x0af57000 0x0 0x09c>;
+ <0x0 0x0af57000 0x0 0x09c>,
+ <0x0 0x0af58000 0x0 0x09c>,
+ <0x0 0x0af59000 0x0 0x09c>,
+ <0x0 0x0af5a000 0x0 0x23c>,
+ <0x0 0x0af5b000 0x0 0x23c>;
interrupt-parent = <&mdss0>;
interrupts = <12>;
@@ -4691,15 +5083,28 @@ mdss0_dp0: displayport-controller@af54000 {
<&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel",
+ "stream_2_pixel",
+ "stream_3_pixel";
assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
- assigned-clock-parents = <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>;
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp0_phy 0>,
+ <&mdss0_dp0_phy 1>,
+ <&mdss0_dp0_phy 1>,
+ <&mdss0_dp0_phy 1>,
+ <&mdss0_dp0_phy 1>;
phys = <&mdss0_dp0_phy>;
phy-names = "dp";
@@ -4761,7 +5166,11 @@ mdss0_dp1: displayport-controller@af5c000 {
<0x0 0x0af5c200 0x0 0x0c0>,
<0x0 0x0af5d000 0x0 0x770>,
<0x0 0x0af5e000 0x0 0x09c>,
- <0x0 0x0af5f000 0x0 0x09c>;
+ <0x0 0x0af5f000 0x0 0x09c>,
+ <0x0 0x0af60000 0x0 0x09c>,
+ <0x0 0x0af61000 0x0 0x09c>,
+ <0x0 0x0af62000 0x0 0x23c>,
+ <0x0 0x0af63000 0x0 0x23c>;
interrupt-parent = <&mdss0>;
interrupts = <13>;
@@ -4770,15 +5179,20 @@ mdss0_dp1: displayport-controller@af5c000 {
<&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
<&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
<&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
- <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
- assigned-clock-parents = <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>;
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp1_phy 0>,
+ <&mdss0_dp1_phy 1>,
+ <&mdss0_dp1_phy 1>;
phys = <&mdss0_dp1_phy>;
phy-names = "dp";
@@ -4992,6 +5406,144 @@ tlmm: pinctrl@f000000 {
gpio-ranges = <&tlmm 0 0 149>;
wakeup-parent = <&pdc>;
+ dp0_hot_plug_det: dp0-hot-plug-det-state {
+ pins = "gpio101";
+ function = "edp0_hot";
+ bias-disable;
+ };
+
+ dp1_hot_plug_det: dp1-hot-plug-det-state {
+ pins = "gpio102";
+ function = "edp1_hot";
+ bias-disable;
+ };
+
+ hs0_mi2s_active: hs0-mi2s-active-state {
+ pins = "gpio114", "gpio115", "gpio116", "gpio117";
+ function = "hs0_mi2s";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ hs2_mi2s_active: hs2-mi2s-active-state {
+ pins = "gpio122", "gpio123", "gpio124", "gpio125";
+ function = "hs2_mi2s";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cci0_0_default: cci0-0-default-state {
+ pins = "gpio60", "gpio61";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci0_0_sleep: cci0-0-sleep-state {
+ pins = "gpio60", "gpio61";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci0_1_default: cci0-1-default-state {
+ pins = "gpio52", "gpio53";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci0_1_sleep: cci0-1-sleep-state {
+ pins = "gpio52", "gpio53";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_0_default: cci1-0-default-state {
+ pins = "gpio62", "gpio63";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci1_0_sleep: cci1-0-sleep-state {
+ pins = "gpio62", "gpio63";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_1_default: cci1-1-default-state {
+ pins = "gpio54", "gpio55";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci1_1_sleep: cci1-1-sleep-state {
+ pins = "gpio54", "gpio55";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci2_0_default: cci2-0-default-state {
+ pins = "gpio64", "gpio65";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci2_0_sleep: cci2-0-sleep-state {
+ pins = "gpio64", "gpio65";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci2_1_default: cci2-1-default-state {
+ pins = "gpio56", "gpio57";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci2_1_sleep: cci2-1-sleep-state {
+ pins = "gpio56", "gpio57";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci3_0_default: cci3-0-default-state {
+ pins = "gpio66", "gpio67";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci3_0_sleep: cci3-0-sleep-state {
+ pins = "gpio66", "gpio67";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci3_1_default: cci3-1-default-state {
+ pins = "gpio58", "gpio59";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci3_1_sleep: cci3-1-sleep-state {
+ pins = "gpio58", "gpio59";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
qup_i2c0_default: qup-i2c0-state {
pins = "gpio20", "gpio21";
function = "qup0_se0";
@@ -5619,6 +6171,46 @@ qup_uart21_rx: qup-uart21-rx-pins {
function = "qup3_se0";
};
};
+
+ sdc_default: sdc-default-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdc_sleep: sdc-sleep-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+ };
};
sram: sram@146d8000 {
@@ -5854,6 +6446,7 @@ intc: interrupt-controller@17a00000 {
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
#redistributor-regions = <1>;
@@ -6055,8 +6648,8 @@ remoteproc_gpdsp0: remoteproc@20c00000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd RPMHPD_CX>,
- <&rpmhpd RPMHPD_MXC>;
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>;
power-domain-names = "cx", "mxc";
interconnects = <&gpdsp_anoc MASTER_DSP0 0
@@ -6080,6 +6673,35 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
label = "gpdsp0";
qcom,remote-pid = <17>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "gdsp0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x38a1 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x38a2 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x38a3 0x0>;
+ dma-coherent;
+ };
+ };
};
};
@@ -6098,8 +6720,8 @@ remoteproc_gpdsp1: remoteproc@21c00000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd RPMHPD_CX>,
- <&rpmhpd RPMHPD_MXC>;
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>;
power-domain-names = "cx", "mxc";
interconnects = <&gpdsp_anoc MASTER_DSP1 0
@@ -6123,6 +6745,35 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
label = "gpdsp1";
qcom,remote-pid = <18>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "gdsp1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x38c1 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x38c2 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x38c3 0x0>;
+ dma-coherent;
+ };
+ };
};
};
@@ -6239,9 +6890,9 @@ remoteproc_cdsp0: remoteproc@26300000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd RPMHPD_CX>,
- <&rpmhpd RPMHPD_MXC>,
- <&rpmhpd RPMHPD_NSP0>;
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>,
+ <&rpmhpd SA8775P_NSP0>;
power-domain-names = "cx", "mxc", "nsp";
interconnects = <&nspa_noc MASTER_CDSP_PROC 0
@@ -6371,9 +7022,9 @@ remoteproc_cdsp1: remoteproc@2a300000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd RPMHPD_CX>,
- <&rpmhpd RPMHPD_MXC>,
- <&rpmhpd RPMHPD_NSP1>;
+ power-domains = <&rpmhpd SA8775P_CX>,
+ <&rpmhpd SA8775P_MXC>,
+ <&rpmhpd SA8775P_NSP1>;
power-domain-names = "cx", "mxc", "nsp";
interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
@@ -6527,8 +7178,8 @@ remoteproc_adsp: remoteproc@30000000 {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd RPMHPD_LCX>,
- <&rpmhpd RPMHPD_LMX>;
+ power-domains = <&rpmhpd SA8775P_LCX>,
+ <&rpmhpd SA8775P_LMX>;
power-domain-names = "lcx", "lmx";
interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
@@ -6584,6 +7235,45 @@ compute-cb@5 {
dma-coherent;
};
};
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x3001 0x0>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
};
};
};
@@ -7635,13 +8325,19 @@ pcie0: pcie@1c00000 {
iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
<0x100 &pcie_smmu 0x0001 0x1>;
- resets = <&gcc GCC_PCIE_0_BCR>;
- reset-names = "pci";
+ resets = <&gcc GCC_PCIE_0_BCR>,
+ <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
power-domains = <&gcc PCIE_0_GDSC>;
phys = <&pcie0_phy>;
phy-names = "pciephy";
+ eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+ eq-presets-16gts = /bits/ 8 <0x55 0x55>;
+
status = "disabled";
pcieport0: pcie@0 {
@@ -7696,7 +8392,6 @@ pcie0_ep: pcie-ep@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
phys = <&pcie0_phy>;
phy-names = "pciephy";
- max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
num-lanes = <2>;
linux,pci-domain = <0>;
@@ -7707,16 +8402,18 @@ pcie0_phy: phy@1c04000 {
compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
reg = <0x0 0x1c04000 0x0 0x2000>;
- clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_CLKREF_EN>,
<&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
- <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
-
- clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
- "pipediv2", "phy_aux";
+ <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe",
+ "pipediv2";
assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
assigned-clock-rates = <100000000>;
@@ -7801,13 +8498,19 @@ pcie1: pcie@1c10000 {
iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
<0x100 &pcie_smmu 0x0081 0x1>;
- resets = <&gcc GCC_PCIE_1_BCR>;
- reset-names = "pci";
+ resets = <&gcc GCC_PCIE_1_BCR>,
+ <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
power-domains = <&gcc PCIE_1_GDSC>;
phys = <&pcie1_phy>;
phy-names = "pciephy";
+ eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+ eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
status = "disabled";
pcie@0 {
@@ -7862,7 +8565,6 @@ pcie1_ep: pcie-ep@1c10000 {
power-domains = <&gcc PCIE_1_GDSC>;
phys = <&pcie1_phy>;
phy-names = "pciephy";
- max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
num-lanes = <4>;
linux,pci-domain = <1>;
@@ -7873,16 +8575,18 @@ pcie1_phy: phy@1c14000 {
compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
reg = <0x0 0x1c14000 0x0 0x4000>;
- clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+ clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_CLKREF_EN>,
<&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
- <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
-
- clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
- "pipediv2", "phy_aux";
+ <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe",
+ "pipediv2";
assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
assigned-clock-rates = <100000000>;
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
new file mode 100644
index 0000000..e72cf67
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "qcs8300.dtsi"
+#include "qcs8300-pmics.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. Monaco EVK";
+ compatible = "qcom,monaco-evk", "qcom,qcs8300";
+
+ aliases {
+ ethernet0 = ðernet0;
+ i2c1 = &i2c1;
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ dmic: audio-codec-0 {
+ compatible = "dmic-codec";
+ #sound-dai-cells = <0>;
+ num-channels = <1>;
+ };
+
+ max98357a: audio-codec-1 {
+ compatible = "maxim,max98357a";
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "qcom,qcs8275-sndcard";
+ model = "MONACO-EVK";
+
+ pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>;
+ pinctrl-names = "default";
+
+ hs0-mi2s-playback-dai-link {
+ link-name = "HS0 MI2S Playback";
+
+ codec {
+ sound-dai = <&max98357a>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ sec-mi2s-capture-dai-link {
+ link-name = "Secondary MI2S Capture";
+
+ codec {
+ sound-dai = <&dmic>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_l3a: ldo3 {
+ regulator-name = "vreg_l3a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_s5c: smps5 {
+ regulator-name = "vreg_s5c";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <512000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+ðernet0 {
+ phy-mode = "2500base-x";
+ phy-handle = <&hsgmii_phy0>;
+
+ pinctrl-0 = <ðernet0_default>;
+ pinctrl-names = "default";
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ nvmem-cells = <&mac_addr0>;
+ nvmem-cell-names = "mac-address";
+
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hsgmii_phy0: ethernet-phy@1c {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <0x1c>;
+ reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <11000>;
+ reset-deassert-us = <70000>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x1>;
+ snps,route-ptp;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x2>;
+ snps,route-avcp;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,map-to-dma-channel = <0x3>;
+ snps,priority = <0xc>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ };
+
+ queue2 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+
+ queue3 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3e800>;
+ snps,low_credit = <0xffc18000>;
+ };
+ };
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&i2c1 {
+ pinctrl-0 = <&qup_i2c1_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ eeprom0: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_addr0: mac-addr@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+ };
+};
+
+&i2c15 {
+ pinctrl-0 = <&qup_i2c15_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ expander0: gpio@38 {
+ compatible = "ti,tca9538";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander1: gpio@39 {
+ compatible = "ti,tca9538";
+ reg = <0x39>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander2: gpio@3a {
+ compatible = "ti,tca9538";
+ reg = <0x3a>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander3: gpio@3b {
+ compatible = "ti,tca9538";
+ reg = <0x3b>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander4: gpio@3c {
+ compatible = "ti,tca9538";
+ reg = <0x3c>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander5: gpio@3d {
+ compatible = "ti,tca9538";
+ reg = <0x3d>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ expander6: gpio@3e {
+ compatible = "ti,tca9538";
+ reg = <0x3e>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&iris {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs8300/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs8300/cdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp {
+ firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+
+ status = "okay";
+};
+
+&serdes0 {
+ phy-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&tlmm {
+ ethernet0_default: ethernet0-default-state {
+ ethernet0_mdc: ethernet0-mdc-pins {
+ pins = "gpio5";
+ function = "emac0_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet0_mdio: ethernet0-mdio-pins {
+ pins = "gpio6";
+ function = "emac0_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-state {
+ pins = "gpio19", "gpio20";
+ function = "qup0_se1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c15_default: qup-i2c15-state {
+ pins = "gpio91", "gpio92";
+ function = "qup1_se7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l8a>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l4c>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l7c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_qmpphy {
+ vdda-phy-supply = <&vreg_l7a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index de9fdc0..d3a25a83 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1562,6 +1562,8 @@ mdss: display-subsystem@1a00000 {
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&gcc GCC_MDSS_BCR>;
+
interrupt-controller;
#interrupt-cells = <1>;
@@ -1834,14 +1836,6 @@ venus: video-codec@1d00000 {
iommus = <&apps_iommu 5>;
memory-region = <&venus_mem>;
status = "disabled";
-
- video-decoder {
- compatible = "venus-decoder";
- };
-
- video-encoder {
- compatible = "venus-encoder";
- };
};
apps_iommu: iommu@1ef0000 {
@@ -2133,6 +2127,7 @@ sdhc_1: mmc@7824900 {
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
+ resets = <&gcc GCC_SDCC1_BCR>;
pinctrl-0 = <&sdc1_default>;
pinctrl-1 = <&sdc1_sleep>;
pinctrl-names = "default", "sleep";
@@ -2154,6 +2149,7 @@ sdhc_2: mmc@7864900 {
<&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
+ resets = <&gcc GCC_SDCC2_BCR>;
pinctrl-0 = <&sdc2_default>;
pinctrl-1 = <&sdc2_sleep>;
pinctrl-names = "default", "sleep";
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 68b92fd..eb64ec3 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1249,6 +1249,8 @@ mdss: display-subsystem@1a00000 {
power-domains = <&gcc MDSS_GDSC>;
+ resets = <&gcc GCC_MDSS_BCR>;
+
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
new file mode 100644
index 0000000..ef4faf7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Cristian Cozzolino
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+ model = "Billion Capture+";
+ compatible = "flipkart,rimob", "qcom,msm8953";
+ chassis-type = "handset";
+ qcom,msm-id = <293 0>;
+ qcom,board-id = <0x340008 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer@90001000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+ width = <1080>;
+ height = <1920>;
+ stride = <(1080 * 3)>;
+ format = "r8g8b8";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_key_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ cont_splash_mem: cont-splash@90001000 {
+ reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+
+&hsusb_phy {
+ vdd-supply = <&pm8953_l3>;
+ vdda-pll-supply = <&pm8953_l7>;
+ vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+ status = "okay";
+};
+
+&pm8953_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8953-regulators";
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_l1-supply = <&pm8953_s3>;
+ vdd_l2_l3-supply = <&pm8953_s3>;
+ vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+ vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+ vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+ vdd_l23-supply = <&pm8953_s3>;
+
+ pm8953_s1: s1 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <1156000>;
+ };
+
+ pm8953_s3: s3 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1224000>;
+ };
+
+ pm8953_s4: s4 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8953_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8953_l2: l2 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8953_l3: l3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ };
+
+ pm8953_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm8953_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8953_l10: l10 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8953_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8953_l13: l13 {
+ regulator-min-microvolt = <3125000>;
+ regulator-max-microvolt = <3125000>;
+ };
+
+ pm8953_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8953_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8953_l19: l19 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8953_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8953_l23: l23 {
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8953_l8>;
+ vqmmc-supply = <&pm8953_l5>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8953_l11>;
+ vqmmc-supply = <&pm8953_l12>;
+
+ cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <135 4>;
+
+ gpio_key_default: gpio-key-default-state {
+ pins = "gpio85";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
index 336b916..ddd7af6 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
@@ -296,7 +296,7 @@ &sdhc_2 {
vmmc-supply = <&pm8953_l11>;
vqmmc-supply = <&pm8953_l12>;
- cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 273e79f..76317c5 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -775,45 +775,131 @@ i2c_8_sleep: i2c-8-sleep-state {
};
spi_3_default: spi-3-default-state {
- pins = "gpio10", "gpio11";
- function = "blsp_spi3";
- drive-strength = <2>;
- bias-disable;
+ cs-pins {
+ pins = "gpio10";
+ function = "blsp_spi3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio8", "gpio9", "gpio11";
+ function = "blsp_spi3";
+ drive-strength = <12>;
+ bias-disable;
+ };
};
spi_3_sleep: spi-3-sleep-state {
- pins = "gpio10", "gpio11";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
+ cs-pins {
+ pins = "gpio10";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio8", "gpio9", "gpio11";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};
spi_5_default: spi-5-default-state {
- pins = "gpio18", "gpio19";
- function = "blsp_spi5";
- drive-strength = <2>;
- bias-disable;
+ cs-pins {
+ pins = "gpio18";
+ function = "blsp_spi5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio16", "gpio17", "gpio19";
+ function = "blsp_spi5";
+ drive-strength = <12>;
+ bias-disable;
+ };
};
spi_5_sleep: spi-5-sleep-state {
- pins = "gpio18", "gpio19";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
+ cs-pins {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio16", "gpio17", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};
spi_6_default: spi-6-default-state {
- pins = "gpio22", "gpio23";
- function = "blsp_spi6";
- drive-strength = <2>;
- bias-disable;
+ cs-pins {
+ pins = "gpio22";
+ function = "blsp_spi6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio20", "gpio21", "gpio23";
+ function = "blsp_spi6";
+ drive-strength = <12>;
+ bias-disable;
+ };
};
spi_6_sleep: spi-6-sleep-state {
- pins = "gpio22", "gpio23";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
+ cs-pins {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio20", "gpio21", "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi_7_default: spi-7-default-state {
+ cs-pins {
+ pins = "gpio136";
+ function = "blsp_spi7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio135", "gpio137", "gpio138";
+ function = "blsp_spi7";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ spi_7_sleep: spi-7-sleep-state {
+ cs-pins {
+ pins = "gpio136";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ spi-pins {
+ pins = "gpio135", "gpio137", "gpio138";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};
uart_5_default: uart-5-default-state {
@@ -1147,7 +1233,7 @@ &bimc SLV_EBI RPM_ALWAYS_TAG>,
status = "disabled";
- zap-shader {
+ gpu_zap_shader: zap-shader {
memory-region = <&zap_shader_region>;
};
@@ -1660,7 +1746,7 @@ spi_3: spi@78b7000 {
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
dma-names = "tx", "rx";
@@ -1751,7 +1837,7 @@ spi_5: spi@7af5000 {
reg = <0x07af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+ clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
dma-names = "tx", "rx";
@@ -1791,7 +1877,7 @@ spi_6: spi@7af6000 {
reg = <0x07af6000 0x600>;
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+ clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
dma-names = "tx", "rx";
@@ -1826,6 +1912,26 @@ i2c_7: i2c@7af7000 {
status = "disabled";
};
+ spi_7: spi@7af7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x07af7000 0x600>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+ dma-names = "tx", "rx";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&spi_7_default>;
+ pinctrl-1 = <&spi_7_sleep>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
i2c_8: i2c@7af8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af8000 0x600>;
diff --git a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
index e524d58..18832a3 100644
--- a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
+++ b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
@@ -190,6 +190,12 @@ rmi4-f12@12 {
reg = <0x12>;
syna,sensor-type = <1>;
};
+
+ rmi4-f1a@1a {
+ reg = <0x1a>;
+ /* Keys listed from right to left */
+ linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f91605d..c75b522 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1928,10 +1928,10 @@ pcie0: pcie@600000 {
"msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pcie0_state_on>;
@@ -2005,10 +2005,10 @@ pcie1: pcie@608000 {
"msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pcie1_state_on>;
@@ -2080,10 +2080,10 @@ pcie2: pcie@610000 {
"msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pcie2_state_on>;
@@ -3766,6 +3766,7 @@ cbf: clock-controller@9a11000 {
intc: interrupt-controller@9bc0000 {
compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
#redistributor-regions = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 0b0a937..5c75fba1 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -3082,9 +3082,9 @@ mdss_dsi1_phy: phy@c996400 {
mdss_hdmi: hdmi-tx@c9a0000 {
compatible = "qcom,hdmi-tx-8998";
- reg = <0x0c9a0000 0x50c>,
- <0x00780000 0x6220>,
- <0x0c9e0000 0x2c>;
+ reg = <0x0c9a0000 0x50c>,
+ <0x00780000 0x6220>,
+ <0x0c9e0000 0x2c>;
reg-names = "core_physical",
"qfprom_physical",
"hdcp_physical";
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
index c7ac9b2..583f61fc 100644
--- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -64,7 +64,7 @@ reboot_reason: reboot-reason@48 {
};
};
- pmk8550_gpios: gpio@8800 {
+ pmk8550_gpios: gpio@b800 {
compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
reg = <0xb800>;
gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index fa24b77..08141b4 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -154,6 +154,7 @@ scm: scm {
compatible = "qcom,scm-qcm2290", "qcom,scm";
clocks = <&rpmcc RPM_SMD_CE1_CLK>;
clock-names = "core";
+ qcom,dload-mode = <&tcsr_regs 0x13000>;
#reset-cells = <1>;
interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
&bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
@@ -565,6 +566,20 @@ qup_uart4_default: qup-uart4-default-state {
bias-disable;
};
+ cci0_default: cci0-default-state {
+ pins = "gpio22", "gpio23";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cci1_default: cci1-default-state {
+ pins = "gpio29", "gpio30";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sdc1_state_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
@@ -953,6 +968,11 @@ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
qcom,ddr-config = <0x80040868>;
bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+
status = "disabled";
sdhc1_opp_table: opp-table {
@@ -1454,6 +1474,7 @@ usb_dwc3: usb@4e00000 {
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
+ snps,parkmode-disable-ss-quirk;
maximum-speed = "super-speed";
dr_mode = "otg";
usb-role-switch;
@@ -1628,6 +1649,42 @@ adreno_smmu: iommu@59a0000 {
#iommu-cells = <2>;
};
+ cci: cci@5c1b000 {
+ compatible = "qcom,qcm2290-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x5c1b000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>;
+
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_0_CLK>;
+ clock-names = "ahb", "cci";
+ assigned-clocks = <&gcc GCC_CAMSS_CCI_0_CLK>;
+ assigned-clock-rates = <37500000>;
+
+ power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camss: camss@5c6e000 {
compatible = "qcom,qcm2290-camss";
@@ -2096,6 +2153,61 @@ apps_smmu: iommu@c600000 {
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
};
+ venus: video-codec@5a00000 {
+ compatible = "qcom,qcm2290-venus";
+ reg = <0 0x5a00000 0 0xf0000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&gcc GCC_VENUS_GDSC>,
+ <&gcc GCC_VCODEC0_GDSC>,
+ <&rpmpd QCM2290_VDDCX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "cx";
+ operating-points-v2 = <&venus_opp_table>;
+
+ clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+ <&gcc GCC_VIDEO_AHB_CLK>,
+ <&gcc GCC_VENUS_CTL_AXI_CLK>,
+ <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+ <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+ <&gcc GCC_VCODEC0_AXI_CLK>;
+ clock-names = "core",
+ "iface",
+ "bus",
+ "throttle",
+ "vcodec0_core",
+ "vcodec0_bus";
+
+ memory-region = <&pil_video_mem>;
+ iommus = <&apps_smmu 0x860 0x0>,
+ <&apps_smmu 0x880 0x0>,
+ <&apps_smmu 0x861 0x04>,
+ <&apps_smmu 0x863 0x0>,
+ <&apps_smmu 0x804 0xe0>;
+
+ interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+ &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+ interconnect-names = "video-mem",
+ "cpu-cfg";
+
+ venus_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-133333333 {
+ opp-hz = /bits/ 64 <133333333>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+ };
+ };
+
wifi: wifi@c800000 {
compatible = "qcom,wcn3990-wifi";
reg = <0x0 0x0c800000 0x0 0x800000>;
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index e115b6a..519e458 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -1176,6 +1176,22 @@ platform {
sound-dai = <&q6routing>;
};
};
+
+ usb-dai-link {
+ link-name = "USB Playback";
+
+ codec {
+ sound-dai = <&q6usbdai USB_RX>;
+ };
+
+ cpu {
+ sound-dai = <&q6afedai USB_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ };
};
&spi13 {
@@ -1364,12 +1380,10 @@ &ufs_mem_phy {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index 7a155ef..73fce639 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -18,6 +18,7 @@
#include "pm7325.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
/delete-node/ &ipa_fw_mem;
/delete-node/ &rmtfs_mem;
@@ -169,6 +170,30 @@ vph_pwr: vph-pwr-regulator {
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
+
+ wcd9370: audio-codec-0 {
+ compatible = "qcom,wcd9370-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+ vdd-buck-supply = <&vreg_l17b_1p7>;
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-px-supply = <&vreg_l18b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob_3p296>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ qcom,rx-device = <&wcd937x_rx>;
+ qcom,tx-device = <&wcd937x_tx>;
+
+ #sound-dai-cells = <1>;
+ };
};
&apps_rsc {
@@ -536,6 +561,22 @@ &gpu_zap_shader {
firmware-name = "qcom/qcm6490/a660_zap.mbn";
};
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+};
+
+&lpass_wsa_macro {
+ status = "okay";
+};
+
&mdss {
status = "okay";
};
@@ -716,6 +757,165 @@ &sdhc_2 {
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};
+&sound {
+ compatible = "qcom,qcm6490-idp-sndcard";
+ model = "QCM6490-IDP";
+
+ audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "TX DMIC0", "MIC BIAS1",
+ "TX DMIC1", "MIC BIAS2",
+ "TX DMIC2", "MIC BIAS3",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "VA DMIC0", "VA MIC BIAS3",
+ "VA DMIC1", "VA MIC BIAS3",
+ "VA DMIC2", "VA MIC BIAS1",
+ "VA DMIC3", "VA MIC BIAS1";
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>,
+ <&swr2 0>, <&lpass_wsa_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd9370 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd9370 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+};
+
+&swr0 {
+ status = "okay";
+
+ wcd937x_rx: codec@0,4 {
+ compatible = "sdw20217010a00";
+ reg = <0 4>;
+
+ /*
+ * WCD9370 RX Port 1 (HPH_L/R) <==> SWR1 Port 1 (HPH_L/R)
+ * WCD9370 RX Port 2 (CLSH) <==> SWR1 Port 2 (CLSH)
+ * WCD9370 RX Port 3 (COMP_L/R) <==> SWR1 Port 3 (COMP_L/R)
+ * WCD9370 RX Port 4 (LO) <==> SWR1 Port 4 (LO)
+ * WCD9370 RX Port 5 (DSD_L/R) <==> SWR1 Port 5 (DSD)
+ */
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+
+ /*
+ * Static channels mapping between slave and master rx port channels.
+ * In the order of slave port channels, which is
+ * hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
+ */
+ qcom,rx-channel-mapping = /bits/ 8 <1 2 1 1 2 1 1 2>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd937x_tx: codec@0,3 {
+ compatible = "sdw20217010a00";
+ reg = <0 3>;
+
+ /*
+ * WCD9370 TX Port 1 (ADC1) <=> SWR2 Port 2
+ * WCD9370 TX Port 2 (ADC2, 3) <=> SWR2 Port 2
+ * WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3
+ * WCD9370 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4
+ */
+ qcom,tx-port-mapping = <1 1 2 3>;
+
+ /*
+ * Static channel mapping between slave and master tx port channels.
+ * In the order of slave port channels which is adc1, adc2, adc3,
+ * mic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
+ */
+ qcom,tx-channel-mapping = /bits/ 8 <1 2 1 1 2 3 3 4 1 2 3 4>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ left_spkr: speaker@0,1 {
+ compatible = "sdw10217020200";
+ reg = <0 1>;
+ powerdown-gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #thermal-sensor-cells = <0>;
+ vdd-supply = <&vreg_l18b_1p8>;
+ qcom,port-mapping = <1 2 3 7>;
+ };
+
+ right_spkr: speaker@0,2 {
+ compatible = "sdw10217020200";
+ reg = <0 2>;
+ powerdown-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #thermal-sensor-cells = <0>;
+ vdd-supply = <&vreg_l18b_1p8>;
+ qcom,port-mapping = <4 5 6 8>;
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
@@ -725,6 +925,13 @@ sd_cd: sd-cd-state {
function = "gpio";
bias-pull-up;
};
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
};
&uart5 {
@@ -751,12 +958,9 @@ &ufs_mem_phy {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- /delete-property/ usb-role-switch;
dr_mode = "peripheral";
+
+ status = "okay";
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
new file mode 100644
index 0000000..251e72f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &wpss_mem;
+
+/ {
+ model = "Particle Tachyon";
+ compatible = "particle,tachyon", "qcom,qcm6490";
+ chassis-type = "embedded";
+
+ aliases {
+ serial0 = &uart5;
+ serial1 = &uart12;
+ serial2 = &uart7;
+ serial3 = &uart8;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&activity_led_state>;
+ pinctrl-names = "default";
+
+ led-activity {
+ function = LED_FUNCTION_ACTIVITY;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu_in: endpoint {
+ remote-endpoint = <&usbdp_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_power_5v: regulator-power-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "power_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ reserved-memory {
+ xbl_mem: xbl@80700000 {
+ reg = <0x0 0x80700000 0x0 0x100000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x100000>;
+ no-map;
+ };
+
+ tags_mem: tags@c0100000 {
+ reg = <0x0 0xc0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@c1300000 {
+ reg = <0x0 0xc1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted-apps@c1800000 {
+ reg = <0x0 0xc1800000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ debug_vm_mem: debug-vm@d0600000 {
+ reg = <0x0 0xd0600000 0x0 0x100000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@86100000 {
+ reg = <0x0 0x86700000 0x0 0x2800000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@88900000 {
+ reg = <0x0 0x88f00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@9ae00000 {
+ reg = <0x0 0x9ae00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0xf600000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw@8b300000 {
+ reg = <0x0 0x8b700000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@8b310000 {
+ reg = <0x0 0x8b710000 0x0 0xa000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@f8500000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xf8500000 0x0 0x600000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+ };
+ };
+
+
+ usbdp-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+ select-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usbdp_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usbdp_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu_in>;
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+ vdd-l2-l7-supply = <&vreg_bob_3p296>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+ vdd-l8-supply = <&vreg_s7b_0p972>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+ vdd-l13-supply = <&vreg_s7b_0p972>;
+ vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+ vreg_s1b_1p872: smps1 {
+ regulator-name = "vreg_s1b_1p872";
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7b_0p972: smps7 {
+ regulator-name = "vreg_s7b_0p972";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p272: smps8 {
+ regulator-name = "vreg_s8b_1p272";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p504: ldo3 {
+ regulator-name = "vreg_l3b_0p504";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <910000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p952: ldo7 {
+ regulator-name = "vreg_l7b_2p952";
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-name = "vreg_l8b_0p904";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p504: ldo11 {
+ regulator-name = "vreg_l11b_1p504";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p751: ldo12 {
+ regulator-name = "vreg_l12b_0p751";
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p53: ldo13 {
+ regulator-name = "vreg_l13b_0p53";
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p08: ldo14 {
+ regulator-name = "vreg_l14b_1p08";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p765: ldo15 {
+ regulator-name = "vreg_l15b_0p765";
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p1: ldo16 {
+ regulator-name = "vreg_l16b_1p1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p7: ldo17 {
+ regulator-name = "vreg_l17b_1p7";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+ vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+ vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+ vdd-l10-supply = <&vreg_s7b_0p972>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_s1c_2p19: smps1 {
+ regulator-name = "vreg_s1c_2p19";
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vreg_s9c_1p084: smps9 {
+ regulator-name = "vreg_s9c_1p084";
+ regulator-min-microvolt = <1084000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p62: ldo2 {
+ regulator-name = "vreg_l2c_1p62";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_2p8: ldo3 {
+ regulator-name = "vreg_l3c_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p62: ldo4 {
+ regulator-name = "vreg_l4c_1p62";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p62: ldo5 {
+ regulator-name = "vreg_l5c_1p62";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p62: ldo8 {
+ regulator-name = "vreg_l8c_1p62";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-name = "vreg_l11c_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p65: ldo12 {
+ regulator-name = "vreg_l12c_1p65";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_2p7: ldo13 {
+ regulator-name = "vreg_l13c_2p7";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob_3p296: bob {
+ regulator-name = "vreg_bob_3p296";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+};
+
+&ipa {
+ firmware-name = "qcom/qcm6490/particle/tachyon/ipa_fws.mbn";
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+
+ status = "okay";
+};
+
+&gcc {
+ protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+ <GCC_MSS_CFG_AHB_CLK>,
+ <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+ <GCC_MSS_OFFLINE_AXI_CLK>,
+ <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+ <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <GCC_MSS_SNOC_AXI_CLK>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_SEC_CTRL_CLK_SRC>,
+ <GCC_WPSS_AHB_BDG_MST_CLK>,
+ <GCC_WPSS_AHB_CLK>,
+ <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/qcm6490/particle/tachyon/a660_zap.mbn";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+};
+
+&pcie0 {
+ perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_reset_n>, <&pcie0_wake_n>, <&pcie0_clkreq_n>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
+ pinctrl-names = "default";
+
+ vddpe-3v3-supply = <&vreg_power_5v>;
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmk8350_vadc {
+ status = "okay";
+
+ channel@44 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_xo_therm";
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcm6490/particle/tachyon/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcm6490/particle/tachyon/cdsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/qcm6490/particle/tachyon/modem.mbn";
+ status = "okay";
+};
+
+&sdc2_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc2_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc2_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdhc_2 {
+ vmmc-supply = <&vreg_l9c_2p96>;
+ vqmmc-supply = <&vreg_l6c_2p96>;
+
+ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&tlmm {
+ activity_led_state: activity-led-state {
+ pins = "gpio14";
+ function = "gpio";
+ bias-disable;
+ };
+
+ bt_en_state: bt-default-state {
+ pins = "gpio84";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+
+ pcie0_reset_n: pcie0-reset-n-state {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-disable;
+ };
+
+ pcie0_wake_n: pcie0-wake-n-state {
+ pins = "gpio89";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ pcie1_reset_n: pcie1-reset-n-state {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-disable;
+ };
+
+ pcie1_wake_n: pcie1-wake-n-state {
+ pins = "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+ pins = "gpio28";
+ function = "gpio";
+ /*
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
+ */
+ bias-bus-hold;
+ };
+
+ qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+ pins = "gpio29";
+ function = "gpio";
+ /*
+ * Configure pull-down on RTS. As RTS is active low
+ * signal, pull it low to indicate the BT SoC that it
+ * can wakeup the system anytime from suspend state by
+ * pulling RX low (by sending wakeup bytes).
+ */
+ bias-pull-down;
+ };
+
+ qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+ pins = "gpio30";
+ function = "gpio";
+ /*
+ * Configure pull-up on TX when it isn't actively driven
+ * to prevent BT SoC from receiving garbage during sleep.
+ */
+ bias-pull-up;
+ };
+
+ qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+ pins = "gpio31";
+ function = "gpio";
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module
+ * is floating which may cause spurious wakeups.
+ */
+ bias-pull-up;
+ };
+
+ usbdp_sbu_default: usbdp-sbu-state {
+ oe-n-pins {
+ pins = "gpio108";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio42";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ wlan_en_state: wlan-default-state {
+ pins = "gpio85";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart7 {
+ /delete-property/ interrupts;
+ interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-1 = <&qup_uart7_sleep_cts>,
+ <&qup_uart7_sleep_rts>,
+ <&qup_uart7_sleep_tx>,
+ <&qup_uart7_sleep_rx>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&uart8 {
+ status = "okay";
+};
+
+&uart12 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l7b_2p952>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+ vccq2-supply = <&vreg_l9b_1p2>;
+ vccq2-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ dr_mode = "otg";
+ usb-role-switch;
+
+ status = "okay";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l6b_1p2>;
+ vdda-pll-supply = <&vreg_l1b_0p912>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index b9a0f7a..eb8efba1 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -910,12 +910,10 @@ &ufs_mem_phy {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 5a9df6b..4328c1d 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1312,6 +1312,7 @@ pil-reloc@94c {
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>,
<0x0b002000 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index a6652e4..705ea71 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -7,17 +7,18 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
-#include "qcs615.dtsi"
+#include "sm6150.dtsi"
#include "pm8150.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QCS615 Ride";
- compatible = "qcom,qcs615-ride", "qcom,qcs615";
+ compatible = "qcom,qcs615-ride", "qcom,qcs615", "qcom,sm6150";
chassis-type = "embedded";
aliases {
mmc0 = &sdhc_1;
mmc1 = &sdhc_2;
serial0 = &uart0;
+ serial1 = &uart7;
};
chosen {
@@ -38,6 +39,22 @@ xo_board_clk: xo-board-clk {
};
};
+ vreg_conn_1p8: regulator-conn-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_1p8";
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_conn_pa: regulator-conn-pa {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_pa";
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
+ };
+
regulator-usb2-vbus {
compatible = "regulator-fixed";
regulator-name = "USB2_VBUS";
@@ -47,6 +64,69 @@ regulator-usb2-vbus {
enable-active-high;
regulator-always-on;
};
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+ pinctrl-names = "default";
+
+ bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ wlan-enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_conn_pa>;
+ vddaon-supply = <&vreg_s5a>;
+ vddpmu-supply = <&vreg_conn_1p8>;
+ vddpmumx-supply = <&vreg_conn_1p8>;
+ vddpmucx-supply = <&vreg_conn_pa>;
+ vddrfa0p95-supply = <&vreg_s5a>;
+ vddrfa1p3-supply = <&vreg_s6a>;
+ vddrfa1p9-supply = <&vreg_l15a>;
+ vddpcie1p3-supply = <&vreg_s6a>;
+ vddpcie1p9-supply = <&vreg_l15a>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
@@ -166,10 +246,7 @@ vreg_l12a: ldo12 {
regulator-name = "vreg_l12a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1890000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
- regulator-allow-set-load;
- regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
- RPMH_REGULATOR_MODE_HPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a: ldo13 {
@@ -211,10 +288,40 @@ vreg_l17a: ldo17 {
};
};
-&gcc {
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&rpmhcc RPMH_CXO_CLK_A>,
- <&sleep_clk>;
+&pcie {
+ perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l12a>;
+
+ status = "okay";
+};
+
+&pcie_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ qcom,calibration-variant = "QC_QCS615_Ride";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
};
&pm8150_gpios {
@@ -240,6 +347,10 @@ &qupv3_id_0 {
status = "okay";
};
+&qupv3_id_1 {
+ status = "okay";
+};
+
&remoteproc_adsp {
firmware-name = "qcom/qcs615/adsp.mbn";
@@ -252,8 +363,43 @@ &remoteproc_cdsp {
status = "okay";
};
-&rpmhcc {
- clocks = <&xo_board_clk>;
+&tlmm {
+ bt_en_state: bt-en-state {
+ pins = "gpio85";
+ function = "gpio";
+ bias-pull-down;
+ output-low;
+ };
+
+ pcie_default_state: pcie-default-state {
+ clkreq-pins {
+ pins = "gpio90";
+ function = "pcie_clk_req";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio101";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-pins {
+ pins = "gpio100";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ wlan_en_state: wlan-en-state {
+ pins = "gpio98";
+ function = "gpio";
+ bias-pull-down;
+ output-low;
+ };
};
&sdhc_1 {
@@ -294,6 +440,24 @@ &uart0 {
status = "okay";
};
+&uart7 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn6855-bt";
+ firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
&usb_1_hsphy {
vdd-supply = <&vreg_l5a>;
vdda-pll-supply = <&vreg_l12a>;
@@ -350,6 +514,6 @@ &ufs_mem_phy {
status = "okay";
};
-&watchdog {
- clocks = <&sleep_clk>;
+&venus {
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
new file mode 100644
index 0000000..c186771
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Common definitions for SC7280-based boards with AudioReach.
+ */
+
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+&lpass_rx_macro {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_va_macro>;
+ clock-names = "mclk",
+ "npl",
+ "macro",
+ "dcodec",
+ "fsgen";
+};
+
+&lpass_tlmm {
+ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core",
+ "audio";
+};
+
+&lpass_tx_macro {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_va_macro>;
+ clock-names = "mclk",
+ "npl",
+ "macro",
+ "dcodec",
+ "fsgen";
+};
+
+&lpass_va_macro {
+ /delete-property/ power-domains;
+ /delete-property/ power-domain-names;
+ clocks = <&q6prmcc LPASS_CLK_ID_VA_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "mclk",
+ "macro",
+ "dcodec";
+
+ pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>,
+ <&lpass_dmic23_clk>, <&lpass_dmic23_data>;
+ pinctrl-names = "default";
+
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&lpass_wsa_macro {
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_va_macro>;
+ clock-names = "mclk",
+ "npl",
+ "macro",
+ "dcodec",
+ "fsgen";
+};
+
+&remoteproc_adsp_glink {
+ /delete-node/ apr;
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x1801 0x0>;
+ };
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 5fbcd48..18cea88 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -19,6 +19,7 @@
#include "pm7325.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
/delete-node/ &ipa_fw_mem;
/delete-node/ &rmtfs_mem;
@@ -765,6 +766,14 @@ redriver_usb_con_sbu: endpoint {
};
};
+&lpass_va_macro {
+ status = "okay";
+};
+
+&lpass_wsa_macro {
+ status = "okay";
+};
+
&mdss {
status = "okay";
};
@@ -811,7 +820,7 @@ &mdss_edp_phy {
&pcie1 {
perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
+ pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
pinctrl-names = "default";
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
@@ -1039,6 +1048,77 @@ &sdhc_2 {
status = "okay";
};
+&sound {
+ compatible = "qcom,qcs6490-rb3gen2-sndcard";
+ model = "QCS6490-RB3Gen2";
+
+ audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "VA DMIC0", "vdd-micb",
+ "VA DMIC1", "vdd-micb",
+ "VA DMIC2", "vdd-micb",
+ "VA DMIC3", "vdd-micb";
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>,
+ <&swr2 0>, <&lpass_wsa_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ left_spkr: speaker@0,1 {
+ compatible = "sdw10217020200";
+ reg = <0 1>;
+ reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #thermal-sensor-cells = <0>;
+ vdd-supply = <&vreg_l18b_1p8>;
+ qcom,port-mapping = <1 2 3 7>;
+ };
+
+ right_spkr: speaker@0,2 {
+ compatible = "sdw10217020200";
+ reg = <0 2>;
+ reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #thermal-sensor-cells = <0>;
+ vdd-supply = <&vreg_l18b_1p8>;
+ qcom,port-mapping = <4 5 6 8>;
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
@@ -1127,12 +1207,10 @@ bluetooth: bluetooth {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 8c166ea..cabb3f5 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -17,6 +17,7 @@ / {
aliases {
serial0 = &uart7;
+ mmc0 = &sdhc_1;
};
chosen {
@@ -295,6 +296,14 @@ queue3 {
};
};
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
&pmm8650au_1_gpios {
usb2_en: usb2-en-state {
pins = "gpio7";
@@ -332,6 +341,26 @@ &serdes0 {
status = "okay";
};
+&sdhc_1 {
+ pinctrl-0 = <&sdc1_state_on>;
+ pinctrl-1 = <&sdc1_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ vmmc-supply = <&vreg_l8a>;
+ vqmmc-supply = <&vreg_s4a>;
+
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ status = "okay";
+};
+
&tlmm {
ethernet0_default: ethernet0-default-state {
ethernet0_mdc: ethernet0-mdc-pins {
@@ -393,17 +422,13 @@ &usb_qmpphy {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "peripheral";
+
+ status = "okay";
};
&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 7ada029..8d78ccac 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -12,11 +12,13 @@
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@@ -53,6 +55,11 @@ cpu0: cpu@0 {
capacity-dmips-mhz = <1946>;
dynamic-power-coefficient = <472>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_0: l2-cache {
compatible = "cache";
@@ -73,6 +80,11 @@ cpu1: cpu@100 {
capacity-dmips-mhz = <1946>;
dynamic-power-coefficient = <472>;
qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_1: l2-cache {
compatible = "cache";
@@ -93,6 +105,11 @@ cpu2: cpu@200 {
capacity-dmips-mhz = <1946>;
dynamic-power-coefficient = <507>;
qcom,freq-domain = <&cpufreq_hw 2>;
+ operating-points-v2 = <&cpu2_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_2: l2-cache {
compatible = "cache";
@@ -113,6 +130,11 @@ cpu3: cpu@300 {
capacity-dmips-mhz = <1946>;
dynamic-power-coefficient = <507>;
qcom,freq-domain = <&cpufreq_hw 2>;
+ operating-points-v2 = <&cpu2_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_3: l2-cache {
compatible = "cache";
@@ -133,6 +155,11 @@ cpu4: cpu@10000 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_4: l2-cache {
compatible = "cache";
@@ -153,6 +180,11 @@ cpu5: cpu@10100 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_5: l2-cache {
compatible = "cache";
@@ -173,6 +205,11 @@ cpu6: cpu@10200 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_6: l2-cache {
compatible = "cache";
@@ -193,6 +230,11 @@ cpu7: cpu@10300 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_7: l2-cache {
compatible = "cache";
@@ -323,6 +365,248 @@ system_sleep: domain-sleep {
};
};
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+ };
+
+ opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+ };
+
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+ };
+
+ opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+ };
+
+ opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+ };
+
+ opp-1420800000 {
+ opp-hz = /bits/ 64 <1420800000>;
+ opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+ };
+
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1574400000 {
+ opp-hz = /bits/ 64 <1574400000>;
+ opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+ };
+
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+ };
+
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+ };
+
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+ };
+
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+ };
+
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ };
+
+ cpu2_opp_table: opp-table-cpu2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+ };
+
+ opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+ };
+
+ opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+ };
+
+ opp-1420800000 {
+ opp-hz = /bits/ 64 <1420800000>;
+ opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+ };
+
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+ };
+
+ opp-1574400000 {
+ opp-hz = /bits/ 64 <1574400000>;
+ opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+ };
+
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+ };
+
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+ };
+
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+ };
+
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+ };
+
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+ };
+
+ opp-2131200000 {
+ opp-hz = /bits/ 64 <2131200000>;
+ opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2284800000 {
+ opp-hz = /bits/ 64 <2284800000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ };
+
+ cpu4_opp_table: opp-table-cpu4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+ };
+
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+ };
+
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+ };
+
+ opp-1305600000 {
+ opp-hz = /bits/ 64 <1305600000>;
+ opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+ };
+
+ opp-1382400000 {
+ opp-hz = /bits/ 64 <1382400000>;
+ opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+ };
+
+ opp-1459200000 {
+ opp-hz = /bits/ 64 <1459200000>;
+ opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+ };
+
+ opp-1574400000 {
+ opp-hz = /bits/ 64 <1574400000>;
+ opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+ };
+
+ opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+ };
+
+ opp-1728000000 {
+ opp-hz = /bits/ 64 <1728000000>;
+ opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+ };
+
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+ };
+
+ opp-1881600000 {
+ opp-hz = /bits/ 64 <1881600000>;
+ opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+ };
+
+ opp-1958400000 {
+ opp-hz = /bits/ 64 <1958400000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+ };
+
dummy_eud: dummy-sink {
compatible = "arm,coresight-dummy-sink";
@@ -640,9 +924,14 @@ ipcc: mailbox@408000 {
qfprom: efuse@784000 {
compatible = "qcom,qcs8300-qfprom", "qcom,qfprom";
- reg = <0x0 0x00784000 0x0 0x1200>;
+ reg = <0x0 0x00784000 0x0 0x2410>;
#address-cells = <1>;
#size-cells = <1>;
+
+ gpu_speed_bin: gpu_speed_bin@240c {
+ reg = <0x240c 0x1>;
+ bits = <0 8>;
+ };
};
gpi_dma0: dma-controller@900000 {
@@ -817,7 +1106,7 @@ uart1: serial@984000 {
<&qup_uart1_tx>, <&qup_uart1_rx>;
pinctrl-names = "default";
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
@@ -984,7 +1273,7 @@ i2c4: i2c@990000 {
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
@@ -1057,7 +1346,7 @@ i2c5: i2c@994000 {
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
@@ -1130,7 +1419,7 @@ i2c6: i2c@998000 {
interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
@@ -2144,6 +2433,45 @@ compute-cb@5 {
dma-coherent;
};
};
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x2001 0x0>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
};
};
@@ -3837,6 +4165,69 @@ cti@6900000 {
clock-names = "apb_pclk";
};
+ sdhc_1: mmc@87c4000 {
+ compatible = "qcom,qcs8300-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x0 0x087c4000 0x0 0x1000>,
+ <0x0 0x087c5000 0x0 0x1000>;
+ reg-names = "hc",
+ "cqhci";
+
+ interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "core",
+ "xo";
+
+ resets = <&gcc GCC_SDCC1_BCR>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&sdhc1_opp_table>;
+ iommus = <&apps_smmu 0x0 0x0>;
+ interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ qcom,dll-config = <0x000f64ee>;
+ qcom,ddr-config = <0x80040868>;
+ supports-cqe;
+ dma-coherent;
+
+ status = "disabled";
+
+ sdhc1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
usb_1_hsphy: phy@8904000 {
compatible = "qcom,qcs8300-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
@@ -3903,6 +4294,104 @@ serdes0: phy@8909000 {
status = "disabled";
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-623.0", "qcom,adreno";
+ reg = <0x0 0x03d00000 0x0 0x40000>,
+ <0x0 0x03d9e000 0x0 0x1000>,
+ <0x0 0x03d61000 0x0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&adreno_smmu 0 0xc00>,
+ <&adreno_smmu 1 0xc00>;
+ operating-points-v2 = <&gpu_opp_table>;
+ qcom,gmu = <&gmu>;
+ interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "gfx-mem";
+ #cooling-cells = <2>;
+
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
+ status = "disabled";
+
+ gpu_zap_shader: zap-shader {
+ memory-region = <&gpu_microcode_mem>;
+ };
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-877000000 {
+ opp-hz = /bits/ 64 <877000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <12484375>;
+ opp-supported-hw = <0x1>;
+ };
+
+ opp-780000000 {
+ opp-hz = /bits/ 64 <780000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ opp-peak-kBps = <10687500>;
+ opp-supported-hw = <0x1>;
+ };
+
+ opp-599000000 {
+ opp-hz = /bits/ 64 <599000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ opp-peak-kBps = <8171875>;
+ opp-supported-hw = <0x3>;
+ };
+
+ opp-479000000 {
+ opp-hz = /bits/ 64 <479000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <5285156>;
+ opp-supported-hw = <0x3>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-623.0", "qcom,adreno-gmu";
+ reg = <0x0 0x03d6a000 0x0 0x34000>,
+ <0x0 0x03de0000 0x0 0x10000>,
+ <0x0 0x0b290000 0x0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>;
+ clock-names = "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "ahb",
+ "hub";
+ power-domains = <&gpucc GPU_CC_CX_GDSC>,
+ <&gpucc GPU_CC_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+ iommus = <&adreno_smmu 5 0xc00>;
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+ };
+ };
+
gpucc: clock-controller@3d90000 {
compatible = "qcom,qcs8300-gpucc";
reg = <0x0 0x03d90000 0x0 0xa000>;
@@ -4081,9 +4570,9 @@ llcc: system-cache-controller@9200000 {
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
- usb_1: usb@a6f8800 {
- compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
- reg = <0x0 0x0a6f8800 0x0 0x400>;
+ usb_1: usb@a600000 {
+ compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+ reg = <0x0 0x0a600000 0x0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4100,12 +4589,14 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -4121,32 +4612,23 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
&config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
interconnect-names = "usb-ddr", "apps-usb";
+ iommus = <&apps_smmu 0x80 0x0>;
+ phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+
wakeup-source;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
status = "disabled";
-
- usb_1_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x0a600000 0x0 0xe000>;
- interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x80 0x0>;
- phys = <&usb_1_hsphy>, <&usb_qmpphy>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,dis_u2_susphy_quirk;
- snps,dis_u3_susphy_quirk;
- };
};
- usb_2: usb@a4f8800 {
- compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
- reg = <0x0 0x0a4f8800 0x0 0x400>;
+ usb_2: usb@a400000 {
+ compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+ reg = <0x0 0x0a400000 0x0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
<&gcc GCC_USB20_MASTER_CLK>,
@@ -4163,11 +4645,13 @@ usb_2: usb@a4f8800 {
<&gcc GCC_USB20_MASTER_CLK>;
assigned-clock-rates = <19200000>, <120000000>;
- interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 10 IRQ_TYPE_EDGE_BOTH>,
<&pdc 9 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq";
@@ -4183,32 +4667,22 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
&config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
interconnect-names = "usb-ddr", "apps-usb";
+ iommus = <&apps_smmu 0x20 0x0>;
+
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+
qcom,select-utmi-as-pipe-clk;
wakeup-source;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
status = "disabled";
-
- usb_2_dwc3: usb@a400000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x0a400000 0x0 0xe000>;
-
- interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x20 0x0>;
-
- phys = <&usb_2_hsphy>;
- phy-names = "usb2-phy";
- maximum-speed = "high-speed";
-
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,dis_u2_susphy_quirk;
- snps,dis_u3_susphy_quirk;
- snps,dis_enblslpm_quirk;
- };
};
iris: video-codec@aa00000 {
@@ -4418,6 +4892,43 @@ tlmm: pinctrl@f100000 {
#interrupt-cells = <2>;
wakeup-parent = <&pdc>;
+ hs0_mi2s_active: hs0-mi2s-active-state {
+ pins = "gpio106", "gpio107", "gpio108", "gpio109";
+ function = "hs0_mi2s";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ mi2s1_active: mi2s1-active-state {
+ data0-pins {
+ pins = "gpio100";
+ function = "mi2s1_data0";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ data1-pins {
+ pins = "gpio101";
+ function = "mi2s1_data1";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sclk-pins {
+ pins = "gpio98";
+ function = "mi2s1_sck";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ ws-pins {
+ pins = "gpio99";
+ function = "mi2s1_ws";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
qup_i2c0_data_clk: qup-i2c0-data-clk-state {
pins = "gpio17", "gpio18";
function = "qup0_se0";
@@ -5042,6 +5553,56 @@ qup_uart16_rx: qup-uart16-rx-state {
pins = "gpio13";
function = "qup2_se0";
};
+
+ sdc1_state_on: sdc1-on-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ rclk-pins {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_state_off: sdc1-off-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+
+ rclk-pins {
+ pins = "sdc1_rclk";
+ bias-bus-hold;
+ };
+ };
};
sram: sram@146d8000 {
@@ -5433,6 +5994,15 @@ rpmhpd_opp_turbo_l1: opp-9 {
};
};
+ epss_l3_cl0: interconnect@18590000 {
+ compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18590000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
reg = <0x0 0x18591000 0x0 0x1000>,
@@ -5455,6 +6025,15 @@ cpufreq_hw: cpufreq@18591000 {
#freq-domain-cells = <1>;
};
+ epss_l3_cl1: interconnect@18592000 {
+ compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18592000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
remoteproc_gpdsp: remoteproc@20c00000 {
compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
reg = <0x0 0x20c00000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
index 759d1ec..7fc2de0 100644
--- a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
@@ -4,8 +4,13 @@
*/
/dts-v1/;
-#include "sa8775p-ride-r3.dts"
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
+
/ {
- model = "Qualcomm QCS9100 Ride Rev3";
+ model = "Qualcomm Technologies, Inc. Lemans Ride Rev3";
compatible = "qcom,qcs9100-ride-r3", "qcom,qcs9100", "qcom,sa8775p";
};
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
index 979462d..b0c5fdd 100644
--- a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
@@ -4,8 +4,13 @@
*/
/dts-v1/;
-#include "sa8775p-ride.dts"
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
+
/ {
- model = "Qualcomm QCS9100 Ride";
+ model = "Qualcomm Technologies, Inc. Lemans Ride";
compatible = "qcom,qcs9100-ride", "qcom,qcs9100", "qcom,sa8775p";
};
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index b2e0fc5..67ba508 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "qcm2290.dtsi"
#include "pm4125.dtsi"
@@ -63,8 +64,8 @@ hdmi_con: endpoint {
i2c2_gpio: i2c {
compatible = "i2c-gpio";
- sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
@@ -698,6 +699,10 @@ &usb_qmpphy_out {
remote-endpoint = <&pm4125_ss_in>;
};
+&venus {
+ status = "okay";
+};
+
&wifi {
vdd-0.8-cx-mx-supply = <&pm4125_l7>;
vdd-1.8-xo-supply = <&pm4125_l13>;
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index a378601..bdf2d66 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
@@ -65,8 +66,8 @@ hdmi_con: endpoint {
i2c2_gpio: i2c {
compatible = "i2c-gpio";
- sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 33ecbc8..d99448a 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -725,15 +725,11 @@ &mdss_dsi0 {
qcom,dual-dsi-mode;
qcom,master-dsi;
#endif
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_a>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 2fd1daf..64e5929 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -35,7 +35,7 @@ dp2-connector {
port {
dp2_connector_in: endpoint {
- remote-endpoint = <&mdss1_dp0_phy_out>;
+ remote-endpoint = <&mdss1_dp0_out>;
};
};
};
@@ -49,7 +49,7 @@ dp3-connector {
port {
dp3_connector_in: endpoint {
- remote-endpoint = <&mdss1_dp1_phy_out>;
+ remote-endpoint = <&mdss1_dp1_out>;
};
};
};
@@ -63,7 +63,7 @@ edp0-connector {
port {
edp0_connector_in: endpoint {
- remote-endpoint = <&mdss0_dp2_phy_out>;
+ remote-endpoint = <&mdss0_dp2_out>;
};
};
};
@@ -77,7 +77,7 @@ edp1-connector {
port {
edp1_connector_in: endpoint {
- remote-endpoint = <&mdss0_dp3_phy_out>;
+ remote-endpoint = <&mdss0_dp3_out>;
};
};
};
@@ -91,7 +91,7 @@ edp2-connector {
port {
edp2_connector_in: endpoint {
- remote-endpoint = <&mdss1_dp2_phy_out>;
+ remote-endpoint = <&mdss1_dp2_out>;
};
};
};
@@ -105,7 +105,7 @@ edp3-connector {
port {
edp3_connector_in: endpoint {
- remote-endpoint = <&mdss1_dp3_phy_out>;
+ remote-endpoint = <&mdss1_dp3_out>;
};
};
};
@@ -361,18 +361,12 @@ &mdss0 {
};
&mdss0_dp2 {
- data-lanes = <0 1 2 3>;
-
status = "okay";
+};
- ports {
- port@1 {
- reg = <1>;
- mdss0_dp2_phy_out: endpoint {
- remote-endpoint = <&edp0_connector_in>;
- };
- };
- };
+&mdss0_dp2_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&edp0_connector_in>;
};
&mdss0_dp2_phy {
@@ -383,18 +377,12 @@ &mdss0_dp2_phy {
};
&mdss0_dp3 {
- data-lanes = <0 1 2 3>;
-
status = "okay";
+};
- ports {
- port@1 {
- reg = <1>;
- mdss0_dp3_phy_out: endpoint {
- remote-endpoint = <&edp1_connector_in>;
- };
- };
- };
+&mdss0_dp3_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&edp1_connector_in>;
};
&mdss0_dp3_phy {
@@ -409,18 +397,12 @@ &mdss1 {
};
&mdss1_dp0 {
- data-lanes = <0 1 2 3>;
-
status = "okay";
+};
- ports {
- port@1 {
- reg = <1>;
- mdss1_dp0_phy_out: endpoint {
- remote-endpoint = <&dp2_connector_in>;
- };
- };
- };
+&mdss1_dp0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&dp2_connector_in>;
};
&mdss1_dp0_phy {
@@ -431,18 +413,12 @@ &mdss1_dp0_phy {
};
&mdss1_dp1 {
- data-lanes = <0 1 2 3>;
-
status = "okay";
+};
- ports {
- port@1 {
- reg = <1>;
- mdss1_dp1_phy_out: endpoint {
- remote-endpoint = <&dp3_connector_in>;
- };
- };
- };
+&mdss1_dp1_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&dp3_connector_in>;
};
&mdss1_dp1_phy {
@@ -453,18 +429,12 @@ &mdss1_dp1_phy {
};
&mdss1_dp2 {
- data-lanes = <0 1 2 3>;
-
status = "okay";
+};
- ports {
- port@1 {
- reg = <1>;
- mdss1_dp2_phy_out: endpoint {
- remote-endpoint = <&edp2_connector_in>;
- };
- };
- };
+&mdss1_dp2_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&edp2_connector_in>;
};
&mdss1_dp2_phy {
@@ -475,18 +445,12 @@ &mdss1_dp2_phy {
};
&mdss1_dp3 {
- data-lanes = <0 1 2 3>;
-
status = "okay";
+};
- ports {
- port@1 {
- reg = <1>;
- mdss1_dp3_phy_out: endpoint {
- remote-endpoint = <&edp3_connector_in>;
- };
- };
- };
+&mdss1_dp3_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&edp3_connector_in>;
};
&mdss1_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
index ae065ae..b25f0b2 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
@@ -5,43 +5,13 @@
/dts-v1/;
-#include "sa8775p-ride.dtsi"
+#include "lemans-auto.dtsi"
+
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
/ {
model = "Qualcomm SA8775P Ride Rev3";
compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p";
};
-
-ðernet0 {
- phy-mode = "2500base-x";
-};
-
-ðernet1 {
- phy-mode = "2500base-x";
-};
-
-&mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sgmii_phy0: phy@8 {
- compatible = "ethernet-phy-id31c3.1c33";
- reg = <0x8>;
- device_type = "ethernet-phy";
- interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
- reset-assert-us = <11000>;
- reset-deassert-us = <70000>;
- };
-
- sgmii_phy1: phy@0 {
- compatible = "ethernet-phy-id31c3.1c33";
- reg = <0x0>;
- device_type = "ethernet-phy";
- interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
- reset-assert-us = <11000>;
- reset-deassert-us = <70000>;
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 2e87fd7..2d9028c 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -5,43 +5,13 @@
/dts-v1/;
-#include "sa8775p-ride.dtsi"
+#include "lemans-auto.dtsi"
+
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
/ {
model = "Qualcomm SA8775P Ride";
compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
};
-
-ðernet0 {
- phy-mode = "sgmii";
-};
-
-ðernet1 {
- phy-mode = "sgmii";
-};
-
-&mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sgmii_phy0: phy@8 {
- compatible = "ethernet-phy-id0141.0dd4";
- reg = <0x8>;
- device_type = "ethernet-phy";
- interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
- reset-assert-us = <11000>;
- reset-deassert-us = <70000>;
- };
-
- sgmii_phy1: phy@a {
- compatible = "ethernet-phy-id0141.0dd4";
- reg = <0xa>;
- device_type = "ethernet-phy";
- interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
- reset-assert-us = <11000>;
- reset-deassert-us = <70000>;
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index e400ea4..d65ad0d 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2024, Linaro Limited
*/
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sar2130p-gcc.h>
#include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
@@ -1302,10 +1303,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1421,10 +1422,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2036,8 +2037,8 @@ mdss: display-subsystem@ae00000 {
power-domains = <&dispcc MDSS_GDSC>;
- interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ACTIVE_ONLY
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
&config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
interconnect-names = "mdp0-mem", "cpu-cfg";
@@ -2053,7 +2054,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sar2130p-dpu";
reg = <0x0 0x0ae01000 0x0 0x8f000>,
- <0x0 0x0aeb0000 0x0 0x2008>;
+ <0x0 0x0aeb0000 0x0 0x3000>;
reg-names = "mdp",
"vbif";
@@ -2143,16 +2144,20 @@ mdss_dp0: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
@@ -2237,8 +2242,8 @@ mdss_dsi0: dsi@ae94000 {
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi0_phy 0>,
- <&mdss_dsi0_phy 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
operating-points-v2 = <&mdss_dsi_opp_table>;
@@ -2333,8 +2338,8 @@ mdss_dsi1: dsi@ae96000 {
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>;
+ assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
operating-points-v2 = <&mdss_dsi_opp_table>;
@@ -2392,10 +2397,10 @@ dispcc: clock-controller@af00000 {
<&rpmhcc RPMH_CXO_CLK_A>,
<&gcc GCC_DISP_AHB_CLK>,
<&sleep_clk>,
- <&mdss_dsi0_phy 0>,
- <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>,
+ <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+ <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<0>, /* dp1 */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index 672ac4c..ad342d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -438,15 +438,11 @@ &mdss {
};
&mdss_dp {
- data-lanes = <0 1>;
-
- vdda-1p2-supply = <&vreg_l3c_1p2>;
- vdda-0p9-supply = <&vreg_l4a_0p8>;
-
status = "okay";
};
&mdss_dp_out {
+ data-lanes = <0 1>;
remote-endpoint = <&ec_dp_in>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 0146fb0..19cf419 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -323,15 +323,11 @@ panel0_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&panel0_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index ff8996b..4bea97e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -90,15 +90,11 @@ panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
};
&sdhc_2 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 17908c9..6078308 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -148,15 +148,11 @@ panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
};
&pm6150_adc {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3afb699..a0df10a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2897,6 +2897,31 @@ usb_1_qmpphy: phy@88e8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_qmpphy_out: endpoint { };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_qmpphy_dp_in: endpoint { };
+ };
+ };
};
pmu@90b6300 {
@@ -3070,6 +3095,26 @@ usb_1_dwc3: usb@a600000 {
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
maximum-speed = "super-speed";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+ };
+ };
+ };
};
};
@@ -3095,14 +3140,6 @@ venus: video-codec@aa00000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
interconnect-names = "video-mem", "cpu-cfg";
- video-decoder {
- compatible = "venus-decoder";
- };
-
- video-encoder {
- compatible = "venus-encoder";
- };
-
venus_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -3392,8 +3429,10 @@ mdss_dp: displayport-controller@ae90000 {
ports {
#address-cells = <1>;
#size-cells = <0>;
+
port@0 {
reg = <0>;
+
dp_in: endpoint {
remote-endpoint = <&dpu_intf0_out>;
};
@@ -3401,6 +3440,7 @@ dp_in: endpoint {
port@1 {
reg = <1>;
+
mdss_dp_out: endpoint { };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 8b4239f..84c6d66 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -44,11 +44,6 @@ camera_mem: memory@8ad00000 {
reg = <0x0 0x8ad00000 0x0 0x500000>;
no-map;
};
-
- venus_mem: memory@8b200000 {
- reg = <0x0 0x8b200000 0x0 0x500000>;
- no-map;
- };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 2ba4ea6..5c5e4f1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -621,15 +621,13 @@ CROS_STD_MAIN_KEYMAP
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
+ status = "okay";
+
/* 2.x hub on port 1 */
usb_hub_2_x: hub@1 {
compatible = "usbbda,5411";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index b5fe735..3103f94 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -81,11 +81,9 @@ channel@403 {
};
&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
dr_mode = "otg";
+
+ status = "okay";
};
&usb_2_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 90e5b9a..ccd39a1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -520,11 +520,9 @@ &ufs_mem_phy {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 64a2abd..4b04dea 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -28,6 +28,7 @@
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,lpass.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/thermal/thermal.h>
@@ -620,12 +621,12 @@ cpu4_opp_2208mhz: opp-2208000000 {
cpu4_opp_2400mhz: opp-2400000000 {
opp-hz = /bits/ 64 <2400000000>;
- opp-peak-kBps = <8532000 48537600>;
+ opp-peak-kBps = <12787200 48537600>;
};
cpu4_opp_2611mhz: opp-2611200000 {
opp-hz = /bits/ 64 <2611200000>;
- opp-peak-kBps = <8532000 48537600>;
+ opp-peak-kBps = <12787200 48537600>;
};
};
@@ -685,22 +686,22 @@ cpu7_opp_2381mhz: opp-2380800000 {
cpu7_opp_2400mhz: opp-2400000000 {
opp-hz = /bits/ 64 <2400000000>;
- opp-peak-kBps = <8532000 48537600>;
+ opp-peak-kBps = <12787200 48537600>;
};
cpu7_opp_2515mhz: opp-2515200000 {
opp-hz = /bits/ 64 <2515200000>;
- opp-peak-kBps = <8532000 48537600>;
+ opp-peak-kBps = <12787200 48537600>;
};
cpu7_opp_2707mhz: opp-2707200000 {
opp-hz = /bits/ 64 <2707200000>;
- opp-peak-kBps = <8532000 48537600>;
+ opp-peak-kBps = <12787200 48537600>;
};
cpu7_opp_3014mhz: opp-3014400000 {
opp-hz = /bits/ 64 <3014400000>;
- opp-peak-kBps = <8532000 48537600>;
+ opp-peak-kBps = <12787200 48537600>;
};
};
@@ -2200,6 +2201,135 @@ wifi: wifi@17a10040 {
qcom,smem-state-names = "wlan-smp2p-out";
};
+ pcie0: pcie@1c00000 {
+ compatible = "qcom,pcie-sc7280";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>,
+ <0 0x01c03000 0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+ <&pcie0_phy>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+ clock-names = "pipe",
+ "pipe_mux",
+ "phy_pipe",
+ "ref",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu",
+ "aggre0",
+ "aggre1";
+
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_clkreq_n>;
+ dma-coherent;
+
+ status = "disabled";
+
+ pcie0_port: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x1000>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_EN>,
+ <&gcc GCC_PCIE0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+ };
+
pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sc7280";
reg = <0 0x01c08000 0 0x3000>,
@@ -2240,10 +2370,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
@@ -2644,6 +2774,66 @@ swr1: soundwire@3230000 {
status = "disabled";
};
+ lpass_wsa_macro: codec@3240000 {
+ compatible = "qcom,sc7280-lpass-wsa-macro";
+ reg = <0x0 0x03240000 0x0 0x1000>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+ <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_va_macro>;
+ clock-names = "mclk",
+ "npl",
+ "macro",
+ "dcodec",
+ "fsgen";
+
+ pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>;
+ pinctrl-names = "default";
+
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+
+ status = "disabled";
+ };
+
+ swr2: soundwire@3250000 {
+ compatible = "qcom,soundwire-v1.6.0";
+ reg = <0x0 0x03250000 0x0 0x2000>;
+
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsa_macro>;
+ clock-names = "iface";
+
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+ reset-names = "swr_audio_cgcr";
+
+ qcom,din-ports = <2>;
+ qcom,dout-ports = <6>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07
+ 0x1f 0x3f 0x0f 0x0f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01
+ 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ status = "disabled";
+ };
+
lpass_audiocc: clock-controller@3300000 {
compatible = "qcom,sc7280-lpassaudiocc";
reg = <0 0x03300000 0 0x30000>,
@@ -2811,41 +3001,77 @@ lpass_tlmm: pinctrl@33c0000 {
lpass_dmic01_clk: dmic01-clk-state {
pins = "gpio6";
function = "dmic1_clk";
+ drive-strength = <8>;
+ bias-disable;
};
lpass_dmic01_data: dmic01-data-state {
pins = "gpio7";
function = "dmic1_data";
+ drive-strength = <8>;
+ bias-pull-down;
};
lpass_dmic23_clk: dmic23-clk-state {
pins = "gpio8";
function = "dmic2_clk";
+ drive-strength = <8>;
+ bias-disable;
};
lpass_dmic23_data: dmic23-data-state {
pins = "gpio9";
function = "dmic2_data";
+ drive-strength = <8>;
+ bias-pull-down;
};
lpass_rx_swr_clk: rx-swr-clk-state {
pins = "gpio3";
function = "swr_rx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
};
lpass_rx_swr_data: rx-swr-data-state {
pins = "gpio4", "gpio5";
function = "swr_rx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
};
lpass_tx_swr_clk: tx-swr-clk-state {
pins = "gpio0";
function = "swr_tx_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
};
lpass_tx_swr_data: tx-swr-data-state {
pins = "gpio1", "gpio2", "gpio14";
function = "swr_tx_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+
+ lpass_wsa_swr_clk: wsa-swr-clk-state {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ lpass_wsa_swr_data: wsa-swr-data-state {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
};
};
@@ -3711,14 +3937,10 @@ usb_dp_qmpphy_dp_in: endpoint {
};
};
- usb_2: usb@8cf8800 {
- compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
- reg = <0 0x08cf8800 0 0x400>;
+ usb_2: usb@8c00000 {
+ compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x08c00000 0 0xfc100>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -3735,11 +3957,13 @@ usb_2: usb@8cf8800 {
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 12 IRQ_TYPE_EDGE_BOTH>,
<&pdc 13 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq";
@@ -3753,24 +3977,19 @@ usb_2: usb@8cf8800 {
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_2_dwc3: usb@8c00000 {
- compatible = "snps,dwc3";
- reg = <0 0x08c00000 0 0xe000>;
- interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0xa0 0x0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- phys = <&usb_2_hsphy>;
- phy-names = "usb2-phy";
- maximum-speed = "high-speed";
- usb-role-switch;
+ iommus = <&apps_smmu 0xa0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+ usb-role-switch;
- port {
- usb2_role_switch: endpoint {
- remote-endpoint = <&eud_ep>;
- };
+ port {
+ usb2_role_switch: endpoint {
+ remote-endpoint = <&eud_ep>;
};
};
};
@@ -3822,7 +4041,7 @@ remoteproc_adsp: remoteproc@3700000 {
status = "disabled";
- glink-edge {
+ remoteproc_adsp_glink: glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
@@ -3862,6 +4081,13 @@ q6afecc: clock-controller {
compatible = "qcom,q6afe-clocks";
#clock-cells = <2>;
};
+
+ q6usbdai: usbd {
+ compatible = "qcom,q6usb";
+ iommus = <&apps_smmu 0x180f 0x0>;
+ #sound-dai-cells = <1>;
+ qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+ };
};
q6asm: service@7 {
@@ -4013,6 +4239,12 @@ opp-6 {
opp-7 {
opp-peak-kBps = <8532000>;
};
+ opp-8 {
+ opp-peak-kBps = <10944000>;
+ };
+ opp-9 {
+ opp-peak-kBps = <12787200>;
+ };
};
};
@@ -4252,14 +4484,10 @@ compute-cb@14 {
};
};
- usb_1: usb@a6f8800 {
- compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
+ usb_1: usb@a600000 {
+ compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a600000 0 0xfc100>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4276,12 +4504,14 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -4298,37 +4528,33 @@ usb_1: usb@a6f8800 {
wakeup-source;
- usb_1_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xe000>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0xe0 0x0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,parkmode-disable-ss-quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy", "usb3-phy";
- maximum-speed = "super-speed";
+ iommus = <&apps_smmu 0xe0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,parkmode-disable-ss-quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ num-hc-interrupters = /bits/ 16 <3>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+ maximum-speed = "super-speed";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- usb_1_dwc3_hs: endpoint {
- };
+ usb_1_dwc3_hs: endpoint {
};
+ };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- usb_1_dwc3_ss: endpoint {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
- };
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
};
};
@@ -4724,6 +4950,8 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
iommus = <&apps_smmu 0x900 0x402>;
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -4916,7 +5144,8 @@ mdss_edp: edp@aea0000 {
reg = <0 0x0aea0000 0 0x200>,
<0 0x0aea0200 0 0x200>,
<0 0x0aea0400 0 0xc00>,
- <0 0x0aea1000 0 0x400>;
+ <0 0x0aea1000 0 0x400>,
+ <0 0x0aea1400 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <14>;
@@ -5285,6 +5514,11 @@ mi2s1_ws: mi2s1-ws-state {
function = "mi2s1_ws";
};
+ pcie0_clkreq_n: pcie0-clkreq-n-state {
+ pins = "gpio88";
+ function = "pcie0_clkreqn";
+ };
+
pcie1_clkreq_n: pcie1-clkreq-n-state {
pins = "gpio79";
function = "pcie1_clkreqn";
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 21c2d25a..08d0784d 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -436,8 +436,6 @@ &mdss_dp1_out {
};
&mdss_edp {
- data-lanes = <0 1 2 3>;
-
pinctrl-0 = <&edp_hpd_active>;
pinctrl-names = "default";
@@ -457,15 +455,11 @@ auo_b140han06_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
- mdss_edp_out: endpoint {
- remote-endpoint = <&auo_b140han06_in>;
- };
- };
- };
+&mdss_edp_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&auo_b140han06_in>;
};
&pcie3 {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index 7a4bd69..93de9fe 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -531,8 +531,6 @@ &mdss_dp1_out {
};
&mdss_edp {
- data-lanes = <0 1 2 3>;
-
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd_active>;
@@ -551,15 +549,11 @@ auo_b133han05_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
- mdss_edp_out: endpoint {
- remote-endpoint = <&auo_b133han05_in>;
- };
- };
- };
+&mdss_edp_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&auo_b133han05_in>;
};
&pcie1 {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index f4f1d6a..85c2afc 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sc8180x-camcc.h>
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8180x.h>
@@ -1740,10 +1741,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
@@ -1859,10 +1860,10 @@ pcie3: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
<&gcc GCC_PCIE_3_AUX_CLK>,
@@ -1979,10 +1980,10 @@ pcie1: pcie@1c10000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2099,10 +2100,10 @@ pcie2: pcie@1c18000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
<&gcc GCC_PCIE_2_AUX_CLK>,
@@ -2927,6 +2928,20 @@ usb_sec_dwc3_ss: endpoint {
};
};
+ videocc: clock-controller@ab00000 {
+ compatible = "qcom,sc8180x-videocc",
+ "qcom,sm8150-videocc";
+ reg = <0 0x0ab00000 0 0x10000>;
+ clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bi_tcxo";
+ power-domains = <&rpmhpd SC8180X_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sc8180x-camcc";
reg = <0 0x0ad00000 0 0x20000>;
@@ -2940,7 +2955,7 @@ camcc: clock-controller@ad00000 {
#power-domain-cells = <1>;
};
- mdss: mdss@ae00000 {
+ mdss: display-subsystem@ae00000 {
compatible = "qcom,sc8180x-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
@@ -2980,7 +2995,7 @@ &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
status = "disabled";
- mdss_mdp: mdp@ae01000 {
+ mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sc8180x-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x3000>;
@@ -3074,7 +3089,8 @@ opp-460000000 {
};
mdss_dsi0: dsi@ae94000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sc8180x-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
reg-names = "dsi_ctrl";
@@ -3140,7 +3156,7 @@ opp-358000000 {
};
};
- mdss_dsi0_phy: dsi-phy@ae94400 {
+ mdss_dsi0_phy: phy@ae94400 {
compatible = "qcom,dsi-phy-7nm";
reg = <0 0x0ae94400 0 0x200>,
<0 0x0ae94600 0 0x280>,
@@ -3160,7 +3176,8 @@ mdss_dsi0_phy: dsi-phy@ae94400 {
};
mdss_dsi1: dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ compatible = "qcom,sc8180x-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae96000 0 0x400>;
reg-names = "dsi_ctrl";
@@ -3207,7 +3224,7 @@ mdss_dsi1_out: endpoint {
};
};
- mdss_dsi1_phy: dsi-phy@ae96400 {
+ mdss_dsi1_phy: phy@ae96400 {
compatible = "qcom,dsi-phy-7nm";
reg = <0 0x0ae96400 0 0x200>,
<0 0x0ae96600 0 0x280>,
@@ -3239,16 +3256,20 @@ mdss_dp0: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3317,16 +3338,20 @@ mdss_dp1: displayport-controller@ae98000 {
<&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3387,7 +3412,8 @@ mdss_edp: displayport-controller@ae9a000 {
reg = <0 0xae9a000 0 0x200>,
<0 0xae9a200 0 0x200>,
<0 0xae9a400 0 0x600>,
- <0 0xae9aa00 0 0x400>;
+ <0 0xae9aa00 0 0x400>,
+ <0 0xae9b000 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <14>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3423,6 +3449,13 @@ edp_in: endpoint {
remote-endpoint = <&dpu_intf5_out>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ mdss_edp_out: endpoint {
+ };
+ };
};
edp_opp_table: opp-table {
@@ -3714,6 +3747,7 @@ remoteproc_adsp_glink: glink-edge {
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 8e2c024..490e970 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -495,6 +495,18 @@ &dispcc0 {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
&gpu {
status = "okay";
@@ -548,15 +560,10 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
- mdss0_dp3_out: endpoint {
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+&mdss0_dp3_out {
+ remote-endpoint = <&edp_panel_in>;
};
&mdss0_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
index 1667c71..0374251 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -586,6 +586,18 @@ &dispcc0 {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
&gpu {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index cefecb7..6374307 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -708,6 +708,18 @@ &dispcc0 {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
&gpu {
status = "okay";
@@ -726,7 +738,7 @@ &mdss0_dp0 {
};
&mdss0_dp0_out {
- data-lanes = <0 1>;
+ data-lanes = <0 1 2 3>;
remote-endpoint = <&usb_0_qmpphy_dp_in>;
};
@@ -735,7 +747,7 @@ &mdss0_dp1 {
};
&mdss0_dp1_out {
- data-lanes = <0 1>;
+ data-lanes = <0 1 2 3>;
remote-endpoint = <&usb_1_qmpphy_dp_in>;
};
@@ -761,15 +773,10 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
- mdss0_dp3_out: endpoint {
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+&mdss0_dp3_out {
+ remote-endpoint = <&edp_panel_in>;
};
&mdss0_dp3_phy {
@@ -1360,6 +1367,7 @@ &usb_0_qmpphy {
vdda-phy-supply = <&vreg_l9d>;
vdda-pll-supply = <&vreg_l4d>;
+ mode-switch;
orientation-switch;
status = "okay";
@@ -1397,6 +1405,7 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l4b>;
vdda-pll-supply = <&vreg_l3b>;
+ mode-switch;
orientation-switch;
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
index d00889f..aeed3ef 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
@@ -448,6 +448,18 @@ &dispcc1 {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
&gpu {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
index 8122513..a40dccd 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -63,7 +63,7 @@ dp3_connector: connector {
port {
dp1_connector_in: endpoint {
- remote-endpoint = <&mdss0_dp2_phy_out>;
+ remote-endpoint = <&mdss0_dp2_out>;
};
};
};
@@ -565,6 +565,18 @@ &dispcc0 {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
&gpu {
status = "okay";
@@ -602,15 +614,10 @@ &mdss0_dp2 {
data-lanes = <0 1 2 3>;
status = "okay";
+};
- ports {
- port@1 {
- reg = <1>;
- mdss0_dp2_phy_out: endpoint {
- remote-endpoint = <&dp1_connector_in>;
- };
- };
- };
+&mdss0_dp2_out {
+ remote-endpoint = <&dp1_connector_in>;
};
&mdss0_dp2_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 87555a1..279e5e6 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -912,6 +913,32 @@ gpu_speed_bin: gpu-speed-bin@18b {
};
};
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00800000 0 0x60000>;
+
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0xfff>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0xb6 0x0>;
+
+ status = "disabled";
+ };
+
qup2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x2000>;
@@ -939,6 +966,12 @@ i2c16: i2c@880000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -955,6 +988,12 @@ spi16: spi@880000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -971,6 +1010,12 @@ i2c17: i2c@884000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -987,6 +1032,12 @@ spi17: spi@884000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1017,6 +1068,12 @@ i2c18: i2c@888000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1033,6 +1090,12 @@ spi18: spi@888000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1067,6 +1130,12 @@ i2c19: i2c@88c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1083,6 +1152,12 @@ spi19: spi@88c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1099,6 +1174,12 @@ i2c20: i2c@890000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1115,6 +1196,12 @@ spi20: spi@890000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1131,6 +1218,12 @@ i2c21: i2c@894000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1147,6 +1240,12 @@ spi21: spi@894000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1163,6 +1262,12 @@ i2c22: i2c@898000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1179,6 +1284,12 @@ spi22: spi@898000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1195,6 +1306,12 @@ i2c23: i2c@89c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1211,10 +1328,43 @@ spi23: spi@89c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
};
+ gpi_dma0: dma-controller@900000 {
+ compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00900000 0 0x60000>;
+
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <13>;
+ dma-channel-mask = <0x1fff>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x576 0x0>;
+
+ status = "disabled";
+ };
+
qup0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x009c0000 0 0x6000>;
@@ -1242,6 +1392,12 @@ i2c0: i2c@980000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1258,6 +1414,12 @@ spi0: spi@980000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1274,6 +1436,12 @@ i2c1: i2c@984000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1290,6 +1458,12 @@ spi1: spi@984000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1306,6 +1480,12 @@ i2c2: i2c@988000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1322,6 +1502,12 @@ spi2: spi@988000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1352,6 +1538,12 @@ i2c3: i2c@98c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1368,6 +1560,12 @@ spi3: spi@98c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1384,6 +1582,12 @@ i2c4: i2c@990000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1400,6 +1604,12 @@ spi4: spi@990000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1416,6 +1626,12 @@ i2c5: i2c@994000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1432,6 +1648,12 @@ spi5: spi@994000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1448,6 +1670,12 @@ i2c6: i2c@998000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1464,6 +1692,12 @@ spi6: spi@998000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1480,6 +1714,12 @@ i2c7: i2c@99c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1496,10 +1736,42 @@ spi7: spi@99c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0xfff>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x96 0x0>;
+
+ status = "disabled";
+ };
+
qup1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x00ac0000 0 0x6000>;
@@ -1527,6 +1799,12 @@ i2c8: i2c@a80000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1543,6 +1821,12 @@ spi8: spi@a80000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1559,6 +1843,12 @@ i2c9: i2c@a84000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1575,6 +1865,12 @@ spi9: spi@a84000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1591,6 +1887,12 @@ i2c10: i2c@a88000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1607,6 +1909,12 @@ spi10: spi@a88000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1623,6 +1931,12 @@ i2c11: i2c@a8c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1639,6 +1953,12 @@ spi11: spi@a8c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1655,6 +1975,12 @@ i2c12: i2c@a90000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1671,6 +1997,12 @@ spi12: spi@a90000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1687,6 +2019,12 @@ i2c13: i2c@a94000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1703,6 +2041,12 @@ spi13: spi@a94000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1719,6 +2063,12 @@ i2c14: i2c@a98000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1735,6 +2085,12 @@ spi14: spi@a98000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1751,6 +2107,12 @@ i2c15: i2c@a9c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
@@ -1767,6 +2129,12 @@ spi15: spi@a9c000 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
status = "disabled";
};
};
@@ -1809,10 +2177,10 @@ pcie4: pcie@1c00000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
<&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -1922,10 +2290,10 @@ pcie3b: pcie@1c08000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
<&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
@@ -2033,10 +2401,10 @@ pcie3a: pcie@1c10000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
<&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
@@ -2147,10 +2515,10 @@ pcie2b: pcie@1c18000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
<&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
@@ -2258,10 +2626,10 @@ pcie2a: pcie@1c20000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 GIC_SPI GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 GIC_SPI GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 GIC_SPI GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
<&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
@@ -4338,15 +4706,19 @@ mdss0_dp0: displayport-controller@ae90000 {
<&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
clock-names = "core_iface", "core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4417,14 +4789,18 @@ mdss0_dp1: displayport-controller@ae98000 {
<&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
<&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
<&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
- <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+ <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
clock-names = "core_iface", "core_aux",
"ctrl_link",
- "ctrl_link_iface", "stream_pixel";
+ "ctrl_link_iface", "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
- <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+ <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+ <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4494,10 +4870,12 @@ mdss0_dp2: displayport-controller@ae9a000 {
<&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
<&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
<&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
- <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
clock-names = "core_iface", "core_aux",
"ctrl_link",
- "ctrl_link_iface", "stream_pixel";
+ "ctrl_link_iface", "stream_pixel",
+ "stream_1_pixel";
interrupt-parent = <&mdss0>;
interrupts = <14>;
phys = <&mdss0_dp2_phy>;
@@ -4505,8 +4883,11 @@ mdss0_dp2: displayport-controller@ae9a000 {
power-domains = <&rpmhpd SC8280XP_MMCX>;
assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
- <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
- assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+ <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dp2_phy 0>,
+ <&mdss0_dp2_phy 1>,
+ <&mdss0_dp2_phy 1>;
operating-points-v2 = <&mdss0_dp2_opp_table>;
#sound-dai-cells = <0>;
@@ -4526,6 +4907,9 @@ mdss0_dp2_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss0_dp2_out: endpoint {
+ };
};
};
@@ -4598,6 +4982,9 @@ mdss0_dp3_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss0_dp3_out: endpoint {
+ };
};
};
@@ -5669,10 +6056,12 @@ mdss1_dp0: displayport-controller@22090000 {
<&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
clock-names = "core_iface", "core_aux",
"ctrl_link",
- "ctrl_link_iface", "stream_pixel";
+ "ctrl_link_iface", "stream_pixel",
+ "stream_1_pixel";
interrupt-parent = <&mdss1>;
interrupts = <12>;
phys = <&mdss1_dp0_phy>;
@@ -5680,8 +6069,11 @@ mdss1_dp0: displayport-controller@22090000 {
power-domains = <&rpmhpd SC8280XP_MMCX>;
assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
- assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp0_phy 0>,
+ <&mdss1_dp0_phy 1>,
+ <&mdss1_dp0_phy 1>;
operating-points-v2 = <&mdss1_dp0_opp_table>;
#sound-dai-cells = <0>;
@@ -5701,6 +6093,9 @@ mdss1_dp0_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss1_dp0_out: endpoint {
+ };
};
};
@@ -5741,10 +6136,12 @@ mdss1_dp1: displayport-controller@22098000 {
<&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
<&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
<&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
- <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
clock-names = "core_iface", "core_aux",
"ctrl_link",
- "ctrl_link_iface", "stream_pixel";
+ "ctrl_link_iface", "stream_pixel",
+ "stream_1_pixel";
interrupt-parent = <&mdss1>;
interrupts = <13>;
phys = <&mdss1_dp1_phy>;
@@ -5752,8 +6149,11 @@ mdss1_dp1: displayport-controller@22098000 {
power-domains = <&rpmhpd SC8280XP_MMCX>;
assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
- <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
- assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp1_phy 0>,
+ <&mdss1_dp1_phy 1>,
+ <&mdss1_dp1_phy 1>;
operating-points-v2 = <&mdss1_dp1_opp_table>;
#sound-dai-cells = <0>;
@@ -5773,6 +6173,9 @@ mdss1_dp1_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss1_dp1_out: endpoint {
+ };
};
};
@@ -5813,10 +6216,12 @@ mdss1_dp2: displayport-controller@2209a000 {
<&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
<&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
<&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
- <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
clock-names = "core_iface", "core_aux",
"ctrl_link",
- "ctrl_link_iface", "stream_pixel";
+ "ctrl_link_iface", "stream_pixel",
+ "stream_1_pixel";
interrupt-parent = <&mdss1>;
interrupts = <14>;
phys = <&mdss1_dp2_phy>;
@@ -5824,8 +6229,11 @@ mdss1_dp2: displayport-controller@2209a000 {
power-domains = <&rpmhpd SC8280XP_MMCX>;
assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
- <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
- assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+ <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&mdss1_dp2_phy 0>,
+ <&mdss1_dp2_phy 1>,
+ <&mdss1_dp2_phy 1>;
operating-points-v2 = <&mdss1_dp2_opp_table>;
#sound-dai-cells = <0>;
@@ -5845,6 +6253,9 @@ mdss1_dp2_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss1_dp2_out: endpoint {
+ };
};
};
@@ -5917,6 +6328,9 @@ mdss1_dp3_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss1_dp3_out: endpoint {
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 31ed26c3..55a45b5 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -36,6 +36,14 @@ key-volume-up {
};
};
+ /* Dummy regulator until PMI632 has LCDB VSP/VSN support */
+ lcdb_dummy: regulator-lcdb-dummy {
+ compatible = "regulator-fixed";
+ regulator-name = "lcdb_dummy";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -44,6 +52,14 @@ vph_pwr: vph-pwr-regulator {
};
};
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/msm8953/fairphone/fp3/a506_zap.mbn";
+};
+
&hsusb_phy {
vdd-supply = <&pm8953_l3>;
vdda-pll-supply = <&pm8953_l7>;
@@ -87,6 +103,45 @@ &lpass {
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&pm8953_s3>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "djn,98-03057-6598b-i";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+ iovcc-supply = <&pm8953_l6>;
+ vsn-supply = <&lcdb_dummy>;
+ vsp-supply = <&lcdb_dummy>;
+
+ pinctrl-0 = <&mdss_te_default>;
+ pinctrl-names = "default";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+ vcca-supply = <&pm8953_l3>;
+ status = "okay";
+};
+
&mpss {
firmware-name = "qcom/msm8953/fairphone/fp3/mba.mbn",
"qcom/msm8953/fairphone/fp3/modem.mbn";
@@ -292,6 +347,13 @@ &tlmm {
* 135-138: fingerprint reader (SPI)
*/
gpio-reserved-ranges = <0 4>, <135 4>;
+
+ mdss_te_default: mdss-te-default-state {
+ pins = "gpio24";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};
&uart_0 {
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index 74b5d9c..d014228 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -33,6 +33,14 @@ / {
aliases { };
+ battery: battery {
+ compatible = "simple-battery";
+
+ voltage-min-design-microvolt = <3312000>;
+ voltage-max-design-microvolt = <4400000>;
+ charge-full-design-microamp-hours = <3000000>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
@@ -478,6 +486,15 @@ &mdss_mdp {
status = "okay";
};
+&pm660_charger {
+ monitored-battery = <&battery>;
+ status = "okay";
+};
+
+&pm660_rradc {
+ status = "okay";
+};
+
&pm660l_flash {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
deleted file mode 100644
index bd7c25b..0000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
- model = "Google Cheza (rev1)";
- compatible = "google,cheza-rev1", "qcom,sdm845";
-
- /*
- * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
- */
-
- /*
- * NOTE: Technically pp3500_a is not the exact same signal as
- * pp3500_a_vbob (there's a load switch between them and the EC can
- * control pp3500_a via "en_pp3300_a"), but from the AP's point of
- * view they are the same.
- */
- pp3500_a:
- pp3500_a_vbob: pp3500-a-vbob-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vreg_bob";
-
- /*
- * Comes on automatically when pp5000_ldo comes on, which
- * comes on automatically when ppvar_sys comes on
- */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3500000>;
- regulator-max-microvolt = <3500000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp3300_dx_edp: pp3300-dx-edp-regulator {
- /* Yes, it's really 3.5 despite the name of the signal */
- regulator-min-microvolt = <3500000>;
- regulator-max-microvolt = <3500000>;
-
- vin-supply = <&pp3500_a>;
- };
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
- /delete-property/regulator-boot-on;
- /delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
- regulator-min-microvolt = <3500000>;
- regulator-max-microvolt = <3500000>;
- vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
- gpio-line-names = "AP_SPI_FP_MISO",
- "AP_SPI_FP_MOSI",
- "AP_SPI_FP_CLK",
- "AP_SPI_FP_CS_L",
- "UART_AP_TX_DBG_RX",
- "UART_DBG_TX_AP_RX",
- "",
- "FP_RST_L",
- "FCAM_EN",
- "",
- "EDP_BRIJ_IRQ",
- "EC_IN_RW_ODL",
- "",
- "RCAM_MCLK",
- "FCAM_MCLK",
- "",
- "RCAM_EN",
- "CCI0_SDA",
- "CCI0_SCL",
- "CCI1_SDA",
- "CCI1_SCL",
- "FCAM_RST_L",
- "",
- "PEN_RST_L",
- "PEN_IRQ_L",
- "",
- "RCAM_VSYNC",
- "ESIM_MISO",
- "ESIM_MOSI",
- "ESIM_CLK",
- "ESIM_CS_L",
- "AP_PEN_1V8_SDA",
- "AP_PEN_1V8_SCL",
- "AP_TS_I2C_SDA",
- "AP_TS_I2C_SCL",
- "RCAM_RST_L",
- "",
- "AP_EDP_BKLTEN",
- "AP_BRD_ID1",
- "BOOT_CONFIG_4",
- "AMP_IRQ_L",
- "EDP_BRIJ_I2C_SDA",
- "EDP_BRIJ_I2C_SCL",
- "EN_PP3300_DX_EDP",
- "SD_CD_ODL",
- "BT_UART_RTS",
- "BT_UART_CTS",
- "BT_UART_RXD",
- "BT_UART_TXD",
- "AMP_I2C_SDA",
- "AMP_I2C_SCL",
- "AP_BRD_ID3",
- "",
- "AP_EC_SPI_CLK",
- "AP_EC_SPI_CS_L",
- "AP_EC_SPI_MISO",
- "AP_EC_SPI_MOSI",
- "FORCED_USB_BOOT",
- "AMP_BCLK",
- "AMP_LRCLK",
- "AMP_DOUT",
- "AMP_DIN",
- "AP_BRD_ID2",
- "PEN_PDCT_L",
- "HP_MCLK",
- "HP_BCLK",
- "HP_LRCLK",
- "HP_DOUT",
- "HP_DIN",
- "",
- "",
- "",
- "",
- "BT_SLIMBUS_DATA",
- "BT_SLIMBUS_CLK",
- "AMP_RESET_L",
- "",
- "FCAM_VSYNC",
- "",
- "AP_SKU_ID1",
- "EC_WOV_BCLK",
- "EC_WOV_LRCLK",
- "EC_WOV_DOUT",
- "",
- "",
- "AP_H1_SPI_MISO",
- "AP_H1_SPI_MOSI",
- "AP_H1_SPI_CLK",
- "AP_H1_SPI_CS_L",
- "",
- "AP_SPI_CS0_L",
- "AP_SPI_MOSI",
- "AP_SPI_MISO",
- "",
- "",
- "AP_SPI_CLK",
- "",
- "RFFE6_CLK",
- "RFFE6_DATA",
- "BOOT_CONFIG_1",
- "BOOT_CONFIG_2",
- "BOOT_CONFIG_0",
- "EDP_BRIJ_EN",
- "",
- "USB_HS_TX_EN",
- "UIM2_DATA",
- "UIM2_CLK",
- "UIM2_RST",
- "UIM2_PRESENT",
- "UIM1_DATA",
- "UIM1_CLK",
- "UIM1_RST",
- "",
- "AP_SKU_ID2",
- "SDM_GRFC_8",
- "SDM_GRFC_9",
- "AP_RST_REQ",
- "HP_IRQ",
- "TS_RESET_L",
- "PEN_EJECT_ODL",
- "HUB_RST_L",
- "FP_TO_AP_IRQ",
- "AP_EC_INT_L",
- "",
- "",
- "TS_INT_L",
- "AP_SUSPEND_L",
- "SDM_GRFC_3",
- "",
- "H1_AP_INT_ODL",
- "QLINK_REQ",
- "QLINK_EN",
- "SDM_GRFC_2",
- "BOOT_CONFIG_3",
- "WMSS_RESET_L",
- "SDM_GRFC_0",
- "SDM_GRFC_1",
- "RFFE3_DATA",
- "RFFE3_CLK",
- "RFFE4_DATA",
- "RFFE4_CLK",
- "RFFE5_DATA",
- "RFFE5_CLK",
- "GNSS_EN",
- "WCI2_LTE_COEX_RXD",
- "WCI2_LTE_COEX_TXD",
- "AP_RAM_ID1",
- "AP_RAM_ID2",
- "RFFE1_DATA",
- "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
deleted file mode 100644
index 2b72305..0000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
- model = "Google Cheza (rev2)";
- compatible = "google,cheza-rev2", "qcom,sdm845";
-
- /*
- * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
- */
-
- /*
- * NOTE: Technically pp3500_a is not the exact same signal as
- * pp3500_a_vbob (there's a load switch between them and the EC can
- * control pp3500_a via "en_pp3300_a"), but from the AP's point of
- * view they are the same.
- */
- pp3500_a:
- pp3500_a_vbob: pp3500-a-vbob-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vreg_bob";
-
- /*
- * Comes on automatically when pp5000_ldo comes on, which
- * comes on automatically when ppvar_sys comes on
- */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3500000>;
- regulator-max-microvolt = <3500000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp3300_dx_edp: pp3300-dx-edp-regulator {
- /* Yes, it's really 3.5 despite the name of the signal */
- regulator-min-microvolt = <3500000>;
- regulator-max-microvolt = <3500000>;
-
- vin-supply = <&pp3500_a>;
- };
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
- /delete-property/regulator-boot-on;
- /delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
- regulator-min-microvolt = <3500000>;
- regulator-max-microvolt = <3500000>;
- vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
- gpio-line-names = "AP_SPI_FP_MISO",
- "AP_SPI_FP_MOSI",
- "AP_SPI_FP_CLK",
- "AP_SPI_FP_CS_L",
- "UART_AP_TX_DBG_RX",
- "UART_DBG_TX_AP_RX",
- "BRIJ_SUSPEND",
- "FP_RST_L",
- "FCAM_EN",
- "",
- "EDP_BRIJ_IRQ",
- "EC_IN_RW_ODL",
- "",
- "RCAM_MCLK",
- "FCAM_MCLK",
- "",
- "RCAM_EN",
- "CCI0_SDA",
- "CCI0_SCL",
- "CCI1_SDA",
- "CCI1_SCL",
- "FCAM_RST_L",
- "FPMCU_BOOT0",
- "PEN_RST_L",
- "PEN_IRQ_L",
- "FPMCU_SEL_OD",
- "RCAM_VSYNC",
- "ESIM_MISO",
- "ESIM_MOSI",
- "ESIM_CLK",
- "ESIM_CS_L",
- "AP_PEN_1V8_SDA",
- "AP_PEN_1V8_SCL",
- "AP_TS_I2C_SDA",
- "AP_TS_I2C_SCL",
- "RCAM_RST_L",
- "",
- "AP_EDP_BKLTEN",
- "AP_BRD_ID1",
- "BOOT_CONFIG_4",
- "AMP_IRQ_L",
- "EDP_BRIJ_I2C_SDA",
- "EDP_BRIJ_I2C_SCL",
- "EN_PP3300_DX_EDP",
- "SD_CD_ODL",
- "BT_UART_RTS",
- "BT_UART_CTS",
- "BT_UART_RXD",
- "BT_UART_TXD",
- "AMP_I2C_SDA",
- "AMP_I2C_SCL",
- "AP_BRD_ID3",
- "",
- "AP_EC_SPI_CLK",
- "AP_EC_SPI_CS_L",
- "AP_EC_SPI_MISO",
- "AP_EC_SPI_MOSI",
- "FORCED_USB_BOOT",
- "AMP_BCLK",
- "AMP_LRCLK",
- "AMP_DOUT",
- "AMP_DIN",
- "AP_BRD_ID2",
- "PEN_PDCT_L",
- "HP_MCLK",
- "HP_BCLK",
- "HP_LRCLK",
- "HP_DOUT",
- "HP_DIN",
- "",
- "",
- "",
- "",
- "BT_SLIMBUS_DATA",
- "BT_SLIMBUS_CLK",
- "AMP_RESET_L",
- "",
- "FCAM_VSYNC",
- "",
- "AP_SKU_ID1",
- "EC_WOV_BCLK",
- "EC_WOV_LRCLK",
- "EC_WOV_DOUT",
- "",
- "",
- "AP_H1_SPI_MISO",
- "AP_H1_SPI_MOSI",
- "AP_H1_SPI_CLK",
- "AP_H1_SPI_CS_L",
- "",
- "AP_SPI_CS0_L",
- "AP_SPI_MOSI",
- "AP_SPI_MISO",
- "",
- "",
- "AP_SPI_CLK",
- "",
- "RFFE6_CLK",
- "RFFE6_DATA",
- "BOOT_CONFIG_1",
- "BOOT_CONFIG_2",
- "BOOT_CONFIG_0",
- "EDP_BRIJ_EN",
- "",
- "USB_HS_TX_EN",
- "UIM2_DATA",
- "UIM2_CLK",
- "UIM2_RST",
- "UIM2_PRESENT",
- "UIM1_DATA",
- "UIM1_CLK",
- "UIM1_RST",
- "",
- "AP_SKU_ID2",
- "SDM_GRFC_8",
- "SDM_GRFC_9",
- "AP_RST_REQ",
- "HP_IRQ",
- "TS_RESET_L",
- "PEN_EJECT_ODL",
- "HUB_RST_L",
- "FP_TO_AP_IRQ",
- "AP_EC_INT_L",
- "",
- "",
- "TS_INT_L",
- "AP_SUSPEND_L",
- "SDM_GRFC_3",
- "",
- "H1_AP_INT_ODL",
- "QLINK_REQ",
- "QLINK_EN",
- "SDM_GRFC_2",
- "BOOT_CONFIG_3",
- "WMSS_RESET_L",
- "SDM_GRFC_0",
- "SDM_GRFC_1",
- "RFFE3_DATA",
- "RFFE3_CLK",
- "RFFE4_DATA",
- "RFFE4_CLK",
- "RFFE5_DATA",
- "RFFE5_CLK",
- "GNSS_EN",
- "WCI2_LTE_COEX_RXD",
- "WCI2_LTE_COEX_TXD",
- "AP_RAM_ID1",
- "AP_RAM_ID2",
- "RFFE1_DATA",
- "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
deleted file mode 100644
index 1ba67be..0000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
- model = "Google Cheza (rev3+)";
- compatible = "google,cheza", "qcom,sdm845";
-};
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
- gpio-line-names = "AP_SPI_FP_MISO",
- "AP_SPI_FP_MOSI",
- "AP_SPI_FP_CLK",
- "AP_SPI_FP_CS_L",
- "UART_AP_TX_DBG_RX",
- "UART_DBG_TX_AP_RX",
- "BRIJ_SUSPEND",
- "FP_RST_L",
- "FCAM_EN",
- "",
- "EDP_BRIJ_IRQ",
- "EC_IN_RW_ODL",
- "",
- "RCAM_MCLK",
- "FCAM_MCLK",
- "",
- "RCAM_EN",
- "CCI0_SDA",
- "CCI0_SCL",
- "CCI1_SDA",
- "CCI1_SCL",
- "FCAM_RST_L",
- "FPMCU_BOOT0",
- "PEN_RST_L",
- "PEN_IRQ_L",
- "FPMCU_SEL_OD",
- "RCAM_VSYNC",
- "ESIM_MISO",
- "ESIM_MOSI",
- "ESIM_CLK",
- "ESIM_CS_L",
- "AP_PEN_1V8_SDA",
- "AP_PEN_1V8_SCL",
- "AP_TS_I2C_SDA",
- "AP_TS_I2C_SCL",
- "RCAM_RST_L",
- "",
- "AP_EDP_BKLTEN",
- "AP_BRD_ID0",
- "BOOT_CONFIG_4",
- "AMP_IRQ_L",
- "EDP_BRIJ_I2C_SDA",
- "EDP_BRIJ_I2C_SCL",
- "EN_PP3300_DX_EDP",
- "SD_CD_ODL",
- "BT_UART_RTS",
- "BT_UART_CTS",
- "BT_UART_RXD",
- "BT_UART_TXD",
- "AMP_I2C_SDA",
- "AMP_I2C_SCL",
- "AP_BRD_ID2",
- "",
- "AP_EC_SPI_CLK",
- "AP_EC_SPI_CS_L",
- "AP_EC_SPI_MISO",
- "AP_EC_SPI_MOSI",
- "FORCED_USB_BOOT",
- "AMP_BCLK",
- "AMP_LRCLK",
- "AMP_DOUT",
- "AMP_DIN",
- "AP_BRD_ID1",
- "PEN_PDCT_L",
- "HP_MCLK",
- "HP_BCLK",
- "HP_LRCLK",
- "HP_DOUT",
- "HP_DIN",
- "",
- "",
- "",
- "",
- "BT_SLIMBUS_DATA",
- "BT_SLIMBUS_CLK",
- "AMP_RESET_L",
- "",
- "FCAM_VSYNC",
- "",
- "AP_SKU_ID0",
- "EC_WOV_BCLK",
- "EC_WOV_LRCLK",
- "EC_WOV_DOUT",
- "",
- "",
- "AP_H1_SPI_MISO",
- "AP_H1_SPI_MOSI",
- "AP_H1_SPI_CLK",
- "AP_H1_SPI_CS_L",
- "",
- "AP_SPI_CS0_L",
- "AP_SPI_MOSI",
- "AP_SPI_MISO",
- "",
- "",
- "AP_SPI_CLK",
- "",
- "RFFE6_CLK",
- "RFFE6_DATA",
- "BOOT_CONFIG_1",
- "BOOT_CONFIG_2",
- "BOOT_CONFIG_0",
- "EDP_BRIJ_EN",
- "",
- "USB_HS_TX_EN",
- "UIM2_DATA",
- "UIM2_CLK",
- "UIM2_RST",
- "UIM2_PRESENT",
- "UIM1_DATA",
- "UIM1_CLK",
- "UIM1_RST",
- "",
- "AP_SKU_ID1",
- "SDM_GRFC_8",
- "SDM_GRFC_9",
- "AP_RST_REQ",
- "HP_IRQ",
- "TS_RESET_L",
- "PEN_EJECT_ODL",
- "HUB_RST_L",
- "FP_TO_AP_IRQ",
- "AP_EC_INT_L",
- "",
- "",
- "TS_INT_L",
- "AP_SUSPEND_L",
- "SDM_GRFC_3",
- /*
- * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics
- * call it BIOS_FLASH_WP_R_L.
- */
- "AP_FLASH_WP_L",
- "H1_AP_INT_ODL",
- "QLINK_REQ",
- "QLINK_EN",
- "SDM_GRFC_2",
- "BOOT_CONFIG_3",
- "WMSS_RESET_L",
- "SDM_GRFC_0",
- "SDM_GRFC_1",
- "RFFE3_DATA",
- "RFFE3_CLK",
- "RFFE4_DATA",
- "RFFE4_CLK",
- "RFFE5_DATA",
- "RFFE5_CLK",
- "GNSS_EN",
- "WCI2_LTE_COEX_RXD",
- "WCI2_LTE_COEX_TXD",
- "AP_RAM_ID0",
- "AP_RAM_ID1",
- "RFFE1_DATA",
- "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
deleted file mode 100644
index b7e514f..0000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ /dev/null
@@ -1,1330 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza device tree source (common between revisions)
- *
- * Copyright 2018 Google LLC.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sdm845.dtsi"
-
-/* PMICs depend on spmi_bus label and so must come after SoC */
-#include "pm8005.dtsi"
-#include "pm8998.dtsi"
-
-/ {
- aliases {
- bluetooth0 = &bluetooth;
- serial1 = &uart6;
- serial0 = &uart9;
- wifi0 = &wifi;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&cros_ec_pwm 0>;
- enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
- power-supply = <&ppvar_sys>;
- pinctrl-names = "default";
- pinctrl-0 = <&ap_edp_bklten>;
- };
-
- /* FIXED REGULATORS - parents above children */
-
- /* This is the top level supply and variable voltage */
- ppvar_sys: ppvar-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "ppvar_sys";
- regulator-always-on;
- regulator-boot-on;
- };
-
- /* This divides ppvar_sys by 2, so voltage is variable */
- src_vph_pwr: src-vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "src_vph_pwr";
-
- /* EC turns on with switchcap_on_l; always on for AP */
- regulator-always-on;
- regulator-boot-on;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp5000_a: pp5000-a-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp5000_a";
-
- /* EC turns on with en_pp5000_a; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- src_vreg_bob: src-vreg-bob-regulator {
- compatible = "regulator-fixed";
- regulator-name = "src_vreg_bob";
-
- /* EC turns on with vbob_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp3300_dx_edp: pp3300-dx-edp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_dx_edp";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&en_pp3300_dx_edp>;
- };
-
- /*
- * Apparently RPMh does not provide support for PM8998 S4 because it
- * is always-on; model it as a fixed regulator.
- */
- src_pp1800_s4a: pm8998-smps4 {
- compatible = "regulator-fixed";
- regulator-name = "src_pp1800_s4a";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- vin-supply = <&src_vph_pwr>;
- };
-
- /* BOARD-SPECIFIC TOP LEVEL NODES */
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pen_eject_odl>;
-
- switch-pen-insert {
- label = "Pen Insert";
- /* Insert = low, eject = high */
- gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
- linux,code = <SW_PEN_INSERTED>;
- linux,input-type = <EV_SW>;
- wakeup-source;
- };
- };
-
- panel: panel {
- compatible = "innolux,p120zdg-bf1";
- power-supply = <&pp3300_dx_edp>;
- backlight = <&backlight>;
- no-hpd;
-
- panel_in: port {
- panel_in_edp: endpoint {
- remote-endpoint = <&sn65dsi86_out>;
- };
- };
- };
-};
-
-&cpufreq_hw {
- /delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */
-};
-
-&psci {
- /delete-node/ power-domain-cpu0;
- /delete-node/ power-domain-cpu1;
- /delete-node/ power-domain-cpu2;
- /delete-node/ power-domain-cpu3;
- /delete-node/ power-domain-cpu4;
- /delete-node/ power-domain-cpu5;
- /delete-node/ power-domain-cpu6;
- /delete-node/ power-domain-cpu7;
- /delete-node/ power-domain-cluster;
-};
-
-&cpus {
- /delete-node/ domain-idle-states;
-};
-
-&cpu_idle_states {
- little_cpu_sleep_0: cpu-sleep-0-0 {
- compatible = "arm,idle-state";
- idle-state-name = "little-power-down";
- arm,psci-suspend-param = <0x40000003>;
- entry-latency-us = <350>;
- exit-latency-us = <461>;
- min-residency-us = <1890>;
- local-timer-stop;
- };
-
- little_cpu_sleep_1: cpu-sleep-0-1 {
- compatible = "arm,idle-state";
- idle-state-name = "little-rail-power-down";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <360>;
- exit-latency-us = <531>;
- min-residency-us = <3934>;
- local-timer-stop;
- };
-
- big_cpu_sleep_0: cpu-sleep-1-0 {
- compatible = "arm,idle-state";
- idle-state-name = "big-power-down";
- arm,psci-suspend-param = <0x40000003>;
- entry-latency-us = <264>;
- exit-latency-us = <621>;
- min-residency-us = <952>;
- local-timer-stop;
- };
-
- big_cpu_sleep_1: cpu-sleep-1-1 {
- compatible = "arm,idle-state";
- idle-state-name = "big-rail-power-down";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <702>;
- exit-latency-us = <1061>;
- min-residency-us = <4488>;
- local-timer-stop;
- };
-
- cluster_sleep_0: cluster-sleep-0 {
- compatible = "arm,idle-state";
- idle-state-name = "cluster-power-down";
- arm,psci-suspend-param = <0x400000F4>;
- entry-latency-us = <3263>;
- exit-latency-us = <6562>;
- min-residency-us = <9987>;
- local-timer-stop;
- };
-};
-
-&cpu0 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&little_cpu_sleep_0
- &little_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&cpu1 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&little_cpu_sleep_0
- &little_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&cpu2 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&little_cpu_sleep_0
- &little_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&cpu3 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&little_cpu_sleep_0
- &little_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&cpu4 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&big_cpu_sleep_0
- &big_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&cpu5 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&big_cpu_sleep_0
- &big_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&cpu6 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&big_cpu_sleep_0
- &big_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&cpu7 {
- /delete-property/ power-domains;
- /delete-property/ power-domain-names;
- cpu-idle-states = <&big_cpu_sleep_0
- &big_cpu_sleep_1
- &cluster_sleep_0>;
-};
-
-&lmh_cluster0 {
- status = "disabled";
-};
-
-&lmh_cluster1 {
- status = "disabled";
-};
-
-/*
- * Reserved memory changes
- *
- * Putting this all together (out of order with the rest of the file) to keep
- * all modifications to the memory map (from sdm845.dtsi) in one place.
- */
-
-/*
- * Our mpss_region is 8MB bigger than the default one and that conflicts
- * with venus_mem and cdsp_mem.
- *
- * For venus_mem we'll delete and re-create at a different address.
- *
- * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but
- * that also means we need to delete cdsp_pas.
- */
-/delete-node/ &venus_mem;
-/delete-node/ &cdsp_mem;
-/delete-node/ &cdsp_pas;
-/delete-node/ &gpu_mem;
-
-/* Increase the size from 120 MB to 128 MB */
-&mpss_region {
- reg = <0 0x8e000000 0 0x8000000>;
-};
-
-/* Increase the size from 2MB to 8MB */
-&rmtfs_mem {
- reg = <0 0x88f00000 0 0x800000>;
-};
-
-/ {
- reserved-memory {
- venus_mem: memory@96000000 {
- reg = <0 0x96000000 0 0x500000>;
- no-map;
- };
- };
-};
-
-&qspi {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
- pinctrl-1 = <&qspi_sleep>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
-
- /*
- * In theory chip supports up to 104 MHz and controller up
- * to 80 MHz, but above 25 MHz wasn't reliable so we'll use
- * that for now. b:117440651
- */
- spi-max-frequency = <25000000>;
- spi-tx-bus-width = <2>;
- spi-rx-bus-width = <2>;
- };
-};
-
-
-&apps_rsc {
- /delete-property/ power-domains;
-
- regulators-0 {
- compatible = "qcom,pm8998-rpmh-regulators";
- qcom,pmic-id = "a";
-
- vdd-s1-supply = <&src_vph_pwr>;
- vdd-s2-supply = <&src_vph_pwr>;
- vdd-s3-supply = <&src_vph_pwr>;
- vdd-s4-supply = <&src_vph_pwr>;
- vdd-s5-supply = <&src_vph_pwr>;
- vdd-s6-supply = <&src_vph_pwr>;
- vdd-s7-supply = <&src_vph_pwr>;
- vdd-s8-supply = <&src_vph_pwr>;
- vdd-s9-supply = <&src_vph_pwr>;
- vdd-s10-supply = <&src_vph_pwr>;
- vdd-s11-supply = <&src_vph_pwr>;
- vdd-s12-supply = <&src_vph_pwr>;
- vdd-s13-supply = <&src_vph_pwr>;
- vdd-l1-l27-supply = <&src_pp1025_s7a>;
- vdd-l2-l8-l17-supply = <&src_pp1350_s3a>;
- vdd-l3-l11-supply = <&src_pp1025_s7a>;
- vdd-l4-l5-supply = <&src_pp1025_s7a>;
- vdd-l6-supply = <&src_vph_pwr>;
- vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>;
- vdd-l9-supply = <&src_pp2040_s5a>;
- vdd-l10-l23-l25-supply = <&src_vreg_bob>;
- vdd-l13-l19-l21-supply = <&src_vreg_bob>;
- vdd-l16-l28-supply = <&src_vreg_bob>;
- vdd-l18-l22-supply = <&src_vreg_bob>;
- vdd-l20-l24-supply = <&src_vreg_bob>;
- vdd-l26-supply = <&src_pp1350_s3a>;
- vin-lvs-1-2-supply = <&src_pp1800_s4a>;
-
- src_pp1125_s2a: smps2 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- src_pp1350_s3a: smps3 {
- regulator-min-microvolt = <1352000>;
- regulator-max-microvolt = <1352000>;
- };
-
- src_pp2040_s5a: smps5 {
- regulator-min-microvolt = <1904000>;
- regulator-max-microvolt = <2040000>;
- };
-
- src_pp1025_s7a: smps7 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1028000>;
- };
-
- vdd_qusb_hs0:
- vdda_hp_pcie_core:
- vdda_mipi_csi0_0p9:
- vdda_mipi_csi1_0p9:
- vdda_mipi_csi2_0p9:
- vdda_mipi_dsi0_pll:
- vdda_mipi_dsi1_pll:
- vdda_qlink_lv:
- vdda_qlink_lv_ck:
- vdda_qrefs_0p875:
- vdda_pcie_core:
- vdda_pll_cc_ebi01:
- vdda_pll_cc_ebi23:
- vdda_sp_sensor:
- vdda_ufs1_core:
- vdda_ufs2_core:
- vdda_usb1_ss_core:
- vdda_usb2_ss_core:
- src_pp875_l1a: ldo1 {
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_10:
- src_pp1200_l2a: ldo2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-
- /* TODO: why??? */
- regulator-always-on;
- };
-
- pp1000_l3a_sdr845: ldo3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdd_wcss_cx:
- vdd_wcss_mx:
- vdda_wcss_pll:
- src_pp800_l5a: ldo5 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_13:
- src_pp1800_l6a: ldo6 {
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <1856000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1800_l7a_wcn3990: ldo7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp1200_l8a: ldo8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1248000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1800_dx_pen:
- src_pp1800_l9a: ldo9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp1800_l10a: ldo10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1000_l11a_sdr845: ldo11 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1048000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdd_qfprom:
- vdd_qfprom_sp:
- vdda_apc1_cs_1p8:
- vdda_gfx_cs_1p8:
- vdda_qrefs_1p8:
- vdda_qusb_hs0_1p8:
- vddpx_11:
- src_pp1800_l12a: ldo12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vddpx_2:
- src_pp2950_l13a: ldo13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp1800_l14a: ldo14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp1800_l15a: ldo15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp2700_l16a: ldo16 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2704000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp1300_l17a: ldo17 {
- regulator-min-microvolt = <1304000>;
- regulator-max-microvolt = <1304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp2700_l18a: ldo18 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /*
- * NOTE: this rail should have been called
- * src_pp3300_l19a in the schematic
- */
- src_pp3000_l19a: ldo19 {
- regulator-min-microvolt = <3304000>;
- regulator-max-microvolt = <3304000>;
-
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp2950_l20a: ldo20 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp2950_l21a: ldo21 {
- regulator-min-microvolt = <2704000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp3300_hub:
- src_pp3300_l22a: ldo22 {
- regulator-min-microvolt = <3304000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- /*
- * HACK: Should add a usb hub node and driver
- * to turn this on and off at suspend/resume time
- */
- regulator-boot-on;
- regulator-always-on;
- };
-
- pp3300_l23a_ch1_wcn3990: ldo23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3312000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdda_qusb_hs0_3p1:
- src_pp3075_l24a: ldo24 {
- regulator-min-microvolt = <3088000>;
- regulator-max-microvolt = <3088000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp3300_l25a_ch0_wcn3990: ldo25 {
- regulator-min-microvolt = <3304000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1200_hub:
- vdda_hp_pcie_1p2:
- vdda_hv_ebi0:
- vdda_hv_ebi1:
- vdda_hv_ebi2:
- vdda_hv_ebi3:
- vdda_mipi_csi_1p25:
- vdda_mipi_dsi0_1p2:
- vdda_mipi_dsi1_1p2:
- vdda_pcie_1p2:
- vdda_ufs1_1p2:
- vdda_ufs2_1p2:
- vdda_usb1_ss_1p2:
- vdda_usb2_ss_1p2:
- src_pp1200_l26a: ldo26 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp3300_dx_pen:
- src_pp3300_l28a: ldo28 {
- regulator-min-microvolt = <3304000>;
- regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- src_pp1800_lvs1: lvs1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- src_pp1800_lvs2: lvs2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,pm8005-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vdd-s1-supply = <&src_vph_pwr>;
- vdd-s2-supply = <&src_vph_pwr>;
- vdd-s3-supply = <&src_vph_pwr>;
- vdd-s4-supply = <&src_vph_pwr>;
-
- src_pp600_s3c: smps3 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <600000>;
- };
- };
-};
-
-edp_brij_i2c: &i2c3 {
- status = "okay";
- clock-frequency = <400000>;
-
- sn65dsi86_bridge: bridge@2d {
- compatible = "ti,sn65dsi86";
- reg = <0x2d>;
- pinctrl-names = "default";
- pinctrl-0 = <&edp_brij_en &edp_brij_irq>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-
- enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
-
- vpll-supply = <&src_pp1800_s4a>;
- vccio-supply = <&src_pp1800_s4a>;
- vcca-supply = <&src_pp1200_l2a>;
- vcc-supply = <&src_pp1200_l2a>;
-
- clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
- clock-names = "refclk";
-
- no-hpd;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- sn65dsi86_in: endpoint {
- remote-endpoint = <&mdss_dsi0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- sn65dsi86_out: endpoint {
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
- };
-};
-
-ap_pen_1v8: &i2c11 {
- status = "okay";
- clock-frequency = <400000>;
-
- digitizer@9 {
- compatible = "wacom,w9013", "hid-over-i2c";
- reg = <0x9>;
- pinctrl-names = "default";
- pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
-
- vdd-supply = <&pp3300_dx_pen>;
- vddl-supply = <&pp1800_dx_pen>;
- post-power-on-delay-ms = <100>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-
- hid-descr-addr = <0x1>;
- };
-};
-
-amp_i2c: &i2c12 {
- status = "okay";
- clock-frequency = <400000>;
-};
-
-ap_ts_i2c: &i2c14 {
- status = "okay";
- clock-frequency = <400000>;
-
- touchscreen@10 {
- compatible = "elan,ekth3500";
- reg = <0x10>;
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_l &ts_reset_l>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
-
- vcc33-supply = <&src_pp3300_l28a>;
-
- reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
- };
-};
-
-&gpu {
- status = "okay";
-};
-
-&ipa {
- qcom,gsi-loader = "modem";
- status = "okay";
-};
-
-&lpasscc {
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dsi0 {
- status = "okay";
- vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&sn65dsi86_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-};
-
-&mdss_dsi0_phy {
- status = "okay";
- vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
-/*
- * Cheza fw does not properly program the GPU aperture to allow the
- * GPU to update the SMMU pagetables for context switches. Work
- * around this by dropping the "qcom,adreno-smmu" compat string.
- */
-&adreno_smmu {
- compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
-};
-
-&mss_pil {
- status = "okay";
-
- iommus = <&apps_smmu 0x781 0x0>,
- <&apps_smmu 0x724 0x3>;
-};
-
-&pm8998_pwrkey {
- status = "disabled";
-};
-
-&qupv3_id_0 {
- status = "okay";
- iommus = <&apps_smmu 0x0 0x3>;
-};
-
-&qupv3_id_1 {
- status = "okay";
- iommus = <&apps_smmu 0x6c0 0x3>;
-};
-
-&sdhc_2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
-
- vmmc-supply = <&src_pp2950_l21a>;
- vqmmc-supply = <&vddpx_2>;
-
- cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-};
-
-&spi0 {
- status = "okay";
-};
-
-&spi5 {
- status = "okay";
-
- tpm@0 {
- compatible = "google,cr50";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&h1_ap_int_odl>;
- spi-max-frequency = <800000>;
- interrupt-parent = <&tlmm>;
- interrupts = <129 IRQ_TYPE_EDGE_RISING>;
- };
-};
-
-&spi10 {
- status = "okay";
-
- cros_ec: ec@0 {
- compatible = "google,cros-ec-spi";
- reg = <0>;
- interrupt-parent = <&tlmm>;
- interrupts = <122 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_ap_int_l>;
- spi-max-frequency = <3000000>;
- wakeup-source;
-
- cros_ec_pwm: pwm {
- compatible = "google,cros-ec-pwm";
- #pwm-cells = <1>;
- };
-
- i2c_tunnel: i2c-tunnel {
- compatible = "google,cros-ec-i2c-tunnel";
- google,remote-bus = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-#include <arm/cros-ec-keyboard.dtsi>
-#include <arm/cros-ec-sbs.dtsi>
-
-&uart6 {
- status = "okay";
-
- pinctrl-0 = <&qup_uart6_4pin>;
-
- bluetooth: bluetooth {
- compatible = "qcom,wcn3990-bt";
- vddio-supply = <&src_pp1800_s4a>;
- vddxo-supply = <&pp1800_l7a_wcn3990>;
- vddrf-supply = <&src_pp1300_l17a>;
- vddch0-supply = <&pp3300_l25a_ch0_wcn3990>;
- max-speed = <3200000>;
- };
-};
-
-&uart9 {
- status = "okay";
-};
-
-&ufs_mem_hc {
- status = "okay";
-
- reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
- vcc-supply = <&src_pp2950_l20a>;
- vcc-max-microamp = <600000>;
-};
-
-&ufs_mem_phy {
- status = "okay";
-
- vdda-phy-supply = <&vdda_ufs1_core>;
- vdda-pll-supply = <&vdda_ufs1_1p2>;
-};
-
-&usb_1 {
- status = "okay";
-
- /* We'll use this as USB 2.0 only */
- qcom,select-utmi-as-pipe-clk;
-};
-
-&usb_1_dwc3 {
- /*
- * The hardware design intends this port to be hooked up in peripheral
- * mode, so we'll hardcode it here. Some details:
- * - SDM845 expects only a single Type C connector so it has only one
- * native Type C port but cheza has two Type C connectors.
- * - The only source of DP is the single native Type C port.
- * - On cheza we want to be able to hook DP up to _either_ of the
- * two Type C connectors and want to be able to achieve 4 lanes of DP.
- * - When you configure a Type C port for 4 lanes of DP you lose USB3.
- * - In order to make everything work, the native Type C port is always
- * configured as 4-lanes DP so it's always available.
- * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then
- * sent to the two Type C connectors.
- * - The extra USB2 lines from the native Type C port are always
- * setup as "peripheral" so that we can mux them over to one connector
- * or the other if someone needs the connector configured as a gadget
- * (but they only get USB2 speeds).
- *
- * All the hardware muxes would allow us to hook things up in different
- * ways to some potential benefit for static configurations (you could
- * achieve extra USB2 bandwidth by using two different ports for the
- * two connectors or possibly even get USB3 peripheral mode), but in
- * each case you end up forcing to disconnect/reconnect an in-use
- * USB session in some cases depending on what you hotplug into the
- * other connector. Thus hardcoding this as peripheral makes sense.
- */
- dr_mode = "peripheral";
-
- /*
- * We always need the high speed pins as 4-lanes DP in case someone
- * hotplugs a DP peripheral. Thus limit this port to a max of high
- * speed.
- */
- maximum-speed = "high-speed";
-
- /*
- * We don't need the usb3-phy since we run in highspeed mode always, so
- * re-define these properties removing the superspeed USB PHY reference.
- */
- phys = <&usb_1_hsphy>;
- phy-names = "usb2-phy";
-};
-
-&usb_1_hsphy {
- status = "okay";
-
- vdd-supply = <&vdda_usb1_ss_core>;
- vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
- vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
- qcom,imp-res-offset-value = <8>;
- qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
- qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
- qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- /* We have this hooked up to a hub and we always use in host mode */
- dr_mode = "host";
-};
-
-&usb_2_hsphy {
- status = "okay";
-
- vdd-supply = <&vdda_usb2_ss_core>;
- vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
- vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
- qcom,imp-res-offset-value = <8>;
- qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
-};
-
-&usb_2_qmpphy {
- status = "okay";
-
- vdda-phy-supply = <&vdda_usb2_ss_1p2>;
- vdda-pll-supply = <&vdda_usb2_ss_core>;
-};
-
-&wifi {
- status = "okay";
-
- vdd-0.8-cx-mx-supply = <&src_pp800_l5a >;
- vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>;
- vdd-1.3-rfa-supply = <&src_pp1300_l17a>;
- vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qspi_cs0 {
- bias-disable; /* External pullup */
-};
-
-&qspi_clk {
- bias-disable; /* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data0 {
- bias-disable; /* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data1 {
- bias-pull-down;
-};
-
-&qup_i2c3_default {
- drive-strength = <2>;
-
- /* Has external pullup */
- bias-disable;
-};
-
-&qup_i2c11_default {
- drive-strength = <2>;
-
- /* Has external pullup */
- bias-disable;
-};
-
-&qup_i2c12_default {
- drive-strength = <2>;
-
- /* Has external pullup */
- bias-disable;
-};
-
-&qup_i2c14_default {
- drive-strength = <2>;
-
- /* Has external pullup */
- bias-disable;
-};
-
-&qup_spi0_default {
- drive-strength = <2>;
- bias-disable;
-};
-
-&qup_spi5_default {
- drive-strength = <2>;
- bias-disable;
-};
-
-&qup_spi10_default {
- drive-strength = <2>;
- bias-disable;
-};
-
-&qup_uart9_rx {
- drive-strength = <2>;
- bias-pull-up;
-};
-
-&qup_uart9_tx {
- drive-strength = <2>;
- bias-disable;
-};
-
-/* PINCTRL - board-specific pinctrl */
-&pm8005_gpios {
- gpio-line-names = "",
- "",
- "SLB",
- "";
-};
-
-&pm8998_adc {
- channel@4d {
- reg = <ADC5_AMUX_THM1_100K_PU>;
- label = "sdm_temp";
- };
-
- channel@4e {
- reg = <ADC5_AMUX_THM2_100K_PU>;
- label = "quiet_temp";
- };
-
- channel@4f {
- reg = <ADC5_AMUX_THM3_100K_PU>;
- label = "lte_temp_1";
- };
-
- channel@50 {
- reg = <ADC5_AMUX_THM4_100K_PU>;
- label = "lte_temp_2";
- };
-
- channel@51 {
- reg = <ADC5_AMUX_THM5_100K_PU>;
- label = "charger_temp";
- };
-};
-
-&pm8998_gpios {
- gpio-line-names = "",
- "",
- "SW_CTRL",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "CFG_OPT1",
- "WCSS_PWR_REQ",
- "",
- "CFG_OPT2",
- "SLB";
-};
-
-&tlmm {
- /*
- * pinctrl settings for pins that have no real owners.
- */
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&bios_flash_wp_r_l>,
- <&ap_suspend_l_deassert>;
-
- pinctrl-1 = <&bios_flash_wp_r_l>,
- <&ap_suspend_l_assert>;
-
- /*
- * Hogs prevent usermode from changing the value. A GPIO can be both
- * here and in the pinctrl section.
- */
- ap-suspend-l-hog {
- gpio-hog;
- gpios = <126 GPIO_ACTIVE_LOW>;
- output-low;
- };
-
- ap_edp_bklten: ap-edp-bklten-state {
- pins = "gpio37";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- bios_flash_wp_r_l: bios-flash-wp-r-l-state {
- pins = "gpio128";
- function = "gpio";
- bias-disable;
- };
-
- ec_ap_int_l: ec-ap-int-l-state {
- pins = "gpio122";
- function = "gpio";
- bias-pull-up;
- };
-
- edp_brij_en: edp-brij-en-state {
- pins = "gpio102";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- edp_brij_irq: edp-brij-irq-state {
- pins = "gpio10";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- en_pp3300_dx_edp: en-pp3300-dx-edp-state {
- pins = "gpio43";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- h1_ap_int_odl: h1-ap-int-odl-state {
- pins = "gpio129";
- function = "gpio";
- bias-pull-up;
- };
-
- pen_eject_odl: pen-eject-odl-state {
- pins = "gpio119";
- function = "gpio";
- bias-pull-up;
- };
-
- pen_irq_l: pen-irq-l-state {
- pins = "gpio24";
- function = "gpio";
-
- /* Has external pullup */
- bias-disable;
- };
-
- pen_pdct_l: pen-pdct-l-state {
- pins = "gpio63";
- function = "gpio";
-
- /* Has external pullup */
- bias-disable;
- };
-
- pen_rst_l: pen-rst-l-state {
- pins = "gpio23";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
-
- /*
- * The pen driver doesn't currently support
- * driving this reset line. By specifying
- * output-high here we're relying on the fact
- * that this pin has a default pulldown at boot
- * (which makes sure the pen was in reset if it
- * was powered) and then we set it high here to
- * take it out of reset. Better would be if the
- * pen driver could control this and we could
- * remove "output-high" here.
- */
- output-high;
- };
-
- qspi_sleep: qspi-sleep-state {
- pins = "gpio90", "gpio91", "gpio92", "gpio95";
-
- /*
- * When we're not actively transferring we want pins as GPIOs
- * with output disabled so that the quad SPI IP block stops
- * driving them. We rely on the normal pulls configured in
- * the active state and don't redefine them here. Also note
- * that we don't need the reverse (output-enable) in the
- * normal mode since the "output-enable" only matters for
- * GPIO function.
- */
- function = "gpio";
- output-disable;
- };
-
- sdc2_clk: sdc2-clk-state {
- pins = "sdc2_clk";
- bias-disable;
-
- /*
- * It seems that mmc_test reports errors if drive
- * strength is not 16.
- */
- drive-strength = <16>;
- };
-
- sdc2_cmd: sdc2-cmd-state {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <16>;
- };
-
- sdc2_data: sdc2-data-state {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <16>;
- };
-
- sd_cd_odl: sd-cd-odl-state {
- pins = "gpio44";
- function = "gpio";
- bias-pull-up;
- };
-
- ts_int_l: ts-int-l-state {
- pins = "gpio125";
- function = "gpio";
- bias-pull-up;
- };
-
- ts_reset_l: ts-reset-l-state {
- pins = "gpio118";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- };
-
- ap_suspend_l_assert: ap-suspend-l-assert-state {
- pins = "gpio126";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- output-low;
- };
-
- ap_suspend_l_deassert: ap-suspend-l-deassert-state {
- pins = "gpio126";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- output-high;
- };
-};
-
-&venus {
- status = "okay";
-
- video-firmware {
- iommus = <&apps_smmu 0x10b2 0x0>;
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index 51f1a48..dbe1911 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -44,7 +44,8 @@ camera@10 {
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "xvclk";
- clock-frequency = <19200000>;
+ assigned-clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ assigned-clock-rates = <19200000>;
/*
* The &vreg_s4a_1p8 trace is powered on as a,
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index b5c63fa..8abf3e9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -18,7 +19,7 @@
/ {
model = "Thundercomm Dragonboard 845c";
compatible = "thundercomm,db845c", "qcom,sdm845";
- qcom,msm-id = <341 0x20001>;
+ qcom,msm-id = <QCOM_ID_SDA845 0x20001>;
qcom,board-id = <8 0>;
aliases {
@@ -533,15 +534,11 @@ &mdss_dsi0 {
qcom,dual-dsi-mode;
qcom,master-dsi;
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_a>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
@@ -559,15 +556,11 @@ &mdss_dsi1 {
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
status = "okay";
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_b>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi1_out {
+ remote-endpoint = <<9611_b>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi1_phy {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index a98756e..63d2993 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -445,15 +445,6 @@ &mdss_dsi0 {
qcom,dual-dsi-mode;
qcom,master-dsi;
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&truly_in_0>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-
panel@0 {
compatible = "truly,nt35597-2K-display";
reg = <0>;
@@ -483,6 +474,11 @@ truly_in_1: endpoint {
};
};
+&mdss_dsi0_out {
+ remote-endpoint = <&truly_in_0>;
+ data-lanes = <0 1 2 3>;
+};
+
&mdss_dsi0_phy {
status = "okay";
vdds-supply = <&vdda_mipi_dsi0_pll>;
@@ -497,15 +493,11 @@ &mdss_dsi1 {
/* DSI1 is slave, so use DSI0 clocks */
assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&truly_in_1>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi1_out {
+ remote-endpoint = <&truly_in_1>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi1_phy {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index b118d66..dcfffb2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -7,6 +7,7 @@
/dts-v1/;
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -21,6 +22,9 @@
/delete-node/ &rmtfs_mem;
/ {
+ chassis-type = "handset";
+ qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
+
aliases {
serial0 = &uart9;
serial1 = &uart6;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
index 4005e04..a259eb9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -5,13 +5,12 @@
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/leds/common.h>
#include "sdm845-oneplus-common.dtsi"
/ {
model = "OnePlus 6";
compatible = "oneplus,enchilada", "qcom,sdm845";
- chassis-type = "handset";
- qcom,msm-id = <0x141 0x20001>;
qcom,board-id = <8 0 17819 22>;
battery: battery {
@@ -20,6 +19,14 @@ battery: battery {
charge-full-design-microamp-hours = <3300000>;
voltage-min-design-microvolt = <3400000>;
voltage-max-design-microvolt = <4400000>;
+
+ /*
+ * Typical designs have multiple charger ICs which can handle more
+ * current but the OnePlus 6/T do not, hence the lower limit. This
+ * does not apply when using the Dash Charger, however this is not
+ * yet supported.
+ */
+ constant-charge-current-max-microamp = <1800000>;
};
};
@@ -55,6 +62,33 @@ &pmi8998_charger {
monitored-battery = <&battery>;
};
+&pmi8998_lpg {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+};
+
&sound {
model = "OnePlus 6";
audio-routing = "RX_BIAS", "MCLK",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
index 9471ada..7e75decf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -10,8 +10,6 @@
/ {
model = "OnePlus 6T";
compatible = "oneplus,fajita", "qcom,sdm845";
- chassis-type = "handset";
- qcom,msm-id = <0x141 0x20001>;
qcom,board-id = <8 0 18801 41>;
battery: battery {
@@ -20,6 +18,14 @@ battery: battery {
charge-full-design-microamp-hours = <3700000>;
voltage-min-design-microvolt = <3400000>;
voltage-max-design-microvolt = <4400000>;
+
+ /*
+ * Typical designs have multiple charger ICs which can handle more
+ * current but the OnePlus 6/T do not, hence the lower limit. This
+ * does not apply when using the Dash Charger, however this is not
+ * yet supported.
+ */
+ constant-charge-current-max-microamp = <1800000>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d686531..75a53f0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -56,6 +56,21 @@ framebuffer: framebuffer@9d400000 {
};
};
+ slpi_regulator: slpi-regulator {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&slpi_ldo_active_state>;
+ pinctrl-names = "default";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "slpi";
+
+ enable-active-high;
+ gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+ };
+
vib_regulator: gpio-regulator {
compatible = "regulator-fixed";
@@ -118,7 +133,7 @@ removed_region: removed-region@88f00000 {
};
slpi_mem: slpi@96700000 {
- reg = <0 0x96700000 0 0xf00000>;
+ reg = <0 0x96700000 0 0x1000000>;
no-map;
};
@@ -145,8 +160,8 @@ rmtfs_mem: rmtfs-mem@fde00000 {
i2c21 {
compatible = "i2c-gpio";
- sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&tlmm 127 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 128 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
pinctrl-names = "default";
@@ -633,7 +648,6 @@ max77705_charger: charger@69 {
monitored-battery = <&battery>;
interrupt-parent = <&pm8998_gpios>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
};
fuel-gauge@36 {
@@ -701,7 +715,7 @@ &sound {
pinctrl-names = "default";
status = "okay";
- audio-routing = "RX_BIAS", "MCLK",
+ audio-routing = "RX_BIAS", "MCLK",
"AMIC2", "MIC BIAS2", /* Headset Mic */
"AMIC3", "MIC BIAS2", /* FM radio left Tx */
"AMIC4", "MIC BIAS2", /* FM radio right Tx */
@@ -903,6 +917,13 @@ &ipa {
status = "okay";
};
+&slpi_pas {
+ firmware-name = "qcom/sdm845/starqltechn/slpi.mbn";
+ cx-supply = <&slpi_regulator>;
+
+ status = "okay";
+};
+
&usb_1 {
status = "okay";
};
@@ -1029,6 +1050,13 @@ sd_card_det_n_state: sd-card-det-n-state {
bias-pull-up;
};
+ slpi_ldo_active_state: slpi-ldo-active-state {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
touch_irq_state: touch-irq-state {
pins = "gpio120";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 2cf7b5e..89260fc 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -7,6 +7,7 @@
/dts-v1/;
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -17,7 +18,8 @@
/ {
model = "SHIFT SHIFT6mq";
compatible = "shift,axolotl", "qcom,sdm845";
- qcom,msm-id = <321 0x20001>;
+ chassis-type = "handset";
+ qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
qcom,board-id = <11 0>;
aliases {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index a3a304e..f3f4c09 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -12,7 +13,7 @@
#include "pmi8998.dtsi"
/ {
- qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
+ qcom,msm-id = <QCOM_ID_SDM845 0x20001>; /* SDM845 v2.1 */
qcom,board-id = <8 0>;
aliases {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 7810b0c..7480c8d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -2,6 +2,7 @@
/dts-v1/;
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -32,7 +33,7 @@ / {
/* required for bootloader to select correct board */
qcom,board-id = <69 0>;
- qcom,msm-id = <321 0x20001>;
+ qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
aliases {
serial1 = &uart6;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 63cf879..1c50a05 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -6,6 +6,7 @@
/dts-v1/;
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -38,7 +39,7 @@ / {
chassis-type = "handset";
/* required for bootloader to select correct board */
- qcom,msm-id = <0x141 0x20001>;
+ qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
qcom,board-id = <0x2a 0x0>;
aliases {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c0f466d..13c9515 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2347,10 +2347,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2472,10 +2472,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
@@ -4089,7 +4089,7 @@ port@2 {
reg = <2>;
usb_1_qmpphy_dp_in: endpoint {
- remote-endpoint = <&dp_out>;
+ remote-endpoint = <&mdss_dp_out>;
};
};
};
@@ -4286,14 +4286,6 @@ venus: video-codec@aa00000 {
status = "disabled";
- video-core0 {
- compatible = "venus-decoder";
- };
-
- video-core1 {
- compatible = "venus-encoder";
- };
-
venus_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -4603,7 +4595,7 @@ ports {
port@0 {
reg = <0>;
dpu_intf0_out: endpoint {
- remote-endpoint = <&dp_in>;
+ remote-endpoint = <&mdss_dp_in>;
};
};
@@ -4664,12 +4656,19 @@ mdss_dp: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
- clock-names = "core_iface", "core_aux", "ctrl_link",
- "ctrl_link_iface", "stream_pixel";
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
@@ -4682,14 +4681,14 @@ ports {
#size-cells = <0>;
port@0 {
reg = <0>;
- dp_in: endpoint {
+ mdss_dp_in: endpoint {
remote-endpoint = <&dpu_intf0_out>;
};
};
port@1 {
reg = <1>;
- dp_out: endpoint {
+ mdss_dp_out: endpoint {
remote-endpoint = <&usb_1_qmpphy_dp_in>;
};
};
@@ -5404,11 +5403,11 @@ slimbam: dma-controller@17184000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
qcom,controlled-remotely;
reg = <0 0x17184000 0 0x2a000>;
- num-channels = <31>;
+ num-channels = <23>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
- qcom,num-ees = <2>;
+ qcom,num-ees = <4>;
iommus = <&apps_smmu 0x1806 0x0>;
};
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 8ef6db3..90efbb7 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -421,9 +421,46 @@ connector@1 {
data-role = "host";
/*
- * connected to the onboard USB hub, orientation is
- * handled by the controller
+ * connected to the onboard USB hub, each pair of lanes
+ * (and D+/D- pair) is connected to a separate port on
+ * the hub.
*/
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ucsi1_hs_in_1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usb_hub_2_1>;
+ };
+
+ ucsi1_hs_in_2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&usb_hub_2_2>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ucsi1_ss_in_1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usb_hub_3_1>;
+ };
+
+ ucsi1_ss_in_2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&usb_hub_3_2>;
+ };
+ };
+ };
};
};
};
@@ -561,15 +598,11 @@ &mdss {
&mdss_dsi0 {
status = "okay";
vdda-supply = <&vreg_l26a_1p2>;
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&sn65dsi86_in_a>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <&sn65dsi86_in_a>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
@@ -842,6 +875,69 @@ &usb_2 {
&usb_2_dwc3 {
dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_hub_2_x: hub@1 {
+ compatible = "usb5e3,610";
+ reg = <1>;
+ peer-hub = <&usb_hub_3_x>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@3 {
+ compatible = "usb4f2,b61e";
+ reg = <3>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ usb_hub_2_1: endpoint {
+ remote-endpoint = <&ucsi1_hs_in_1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_hub_2_2: endpoint {
+ remote-endpoint = <&ucsi1_hs_in_2>;
+ };
+ };
+ };
+ };
+
+ usb_hub_3_x: hub@2 {
+ compatible = "usb5e3,620";
+ reg = <2>;
+ peer-hub = <&usb_hub_2_x>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ usb_hub_3_1: endpoint {
+ remote-endpoint = <&ucsi1_ss_in_1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_hub_3_2: endpoint {
+ remote-endpoint = <&ucsi1_ss_in_2>;
+ };
+ };
+ };
+ };
};
&usb_2_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi
similarity index 86%
rename from arch/arm64/boot/dts/qcom/qcs615.dtsi
rename to arch/arm64/boot/dts/qcom/sm6150.dtsi
index bfbb210..3d2a1cb0 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi
@@ -3,7 +3,11 @@
* Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,qcs615-camcc.h>
+#include <dt-bindings/clock/qcom,qcs615-dispcc.h>
#include <dt-bindings/clock/qcom,qcs615-gcc.h>
+#include <dt-bindings/clock/qcom,qcs615-gpucc.h>
+#include <dt-bindings/clock/qcom,qcs615-videocc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,icc.h>
@@ -32,6 +36,8 @@ cpu0: cpu@0 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&l2_0>;
+ clocks = <&cpufreq_hw 0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
l2_0: l2-cache {
@@ -52,6 +58,8 @@ cpu1: cpu@100 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&l2_100>;
+ clocks = <&cpufreq_hw 0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
l2_100: l2-cache {
compatible = "cache";
@@ -71,6 +79,8 @@ cpu2: cpu@200 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&l2_200>;
+ clocks = <&cpufreq_hw 0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
l2_200: l2-cache {
compatible = "cache";
@@ -90,6 +100,8 @@ cpu3: cpu@300 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&l2_300>;
+ clocks = <&cpufreq_hw 0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
l2_300: l2-cache {
compatible = "cache";
@@ -109,6 +121,8 @@ cpu4: cpu@400 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&l2_400>;
+ clocks = <&cpufreq_hw 0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
l2_400: l2-cache {
compatible = "cache";
@@ -128,6 +142,8 @@ cpu5: cpu@500 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&l2_500>;
+ clocks = <&cpufreq_hw 0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
l2_500: l2-cache {
compatible = "cache";
@@ -147,6 +163,8 @@ cpu6: cpu@600 {
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <404>;
next-level-cache = <&l2_600>;
+ clocks = <&cpufreq_hw 1>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
l2_600: l2-cache {
@@ -167,6 +185,8 @@ cpu7: cpu@700 {
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <404>;
next-level-cache = <&l2_700>;
+ clocks = <&cpufreq_hw 1>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
l2_700: l2-cache {
compatible = "cache";
@@ -474,6 +494,11 @@ smem_region: smem@86000000 {
hwlocks = <&tcsr_mutex 3>;
};
+ pil_video_mem: pil-video@93400000 {
+ reg = <0x0 0x93400000 0x0 0x500000>;
+ no-map;
+ };
+
rproc_cdsp_mem: rproc-cdsp@93b00000 {
reg = <0x0 0x93b00000 0x0 0x1e00000>;
no-map;
@@ -495,6 +520,9 @@ soc: soc@0 {
gcc: clock-controller@100000 {
compatible = "qcom,qcs615-gcc";
reg = <0 0x00100000 0 0x1f0000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -631,6 +659,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -654,6 +683,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -681,6 +711,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -703,6 +734,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -728,6 +760,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
@@ -751,6 +784,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1066,6 +1100,153 @@ mmss_noc: interconnect@1740000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ pcie: pcie@1c08000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-qcs615", "qcom,pcie-sm8150";
+ reg = <0x0 0x01c08000 0x0 0x3000>,
+ <0x0 0x40000000 0x0 0xf1d>,
+ <0x0 0x40000f20 0x0 0xa8>,
+ <0x0 0x40001000 0x0 0x1000>,
+ <0x0 0x40100000 0x0 0x100000>,
+ <0x0 0x01c0b000 0x0 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config",
+ "mhi";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+ bus-range = <0x00 0xff>;
+
+ dma-coherent;
+
+ linux,pci-domain = <0>;
+ num-lanes = <1>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a";
+ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ interconnects = <&aggre1_noc MASTER_PCIE QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x400 0x1>,
+ <0x100 &apps_smmu 0x401 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pciephy";
+
+ max-link-speed = <2>;
+
+ operating-points-v2 = <&pcie_opp_table>;
+
+ status = "disabled";
+
+ pcie_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* GEN 1 x1 */
+ opp-2500000 {
+ opp-hz = /bits/ 64 <2500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <250000 1>;
+ };
+
+ /* GEN 2 x1 */
+ opp-5000000 {
+ opp-hz = /bits/ 64 <5000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <500000 1>;
+ };
+ };
+
+ pcie_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ bus-range = <0x01 0xff>;
+ };
+ };
+
+ pcie_phy: phy@1c0e000 {
+ compatible = "qcom,qcs615-qmp-gen3x1-pcie-phy";
+ reg = <0x0 0x01c0e000 0x0 0x1000>;
+
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_CLK>,
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,qcs615-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x0 0x01d84000 0x0 0x3000>,
@@ -1506,6 +1687,19 @@ data-pins {
};
};
+ gpucc: clock-controller@5090000 {
+ compatible = "qcom,qcs615-gpucc";
+ reg = <0 0x05090000 0 0x9000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GPLL0>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x0 0x06002000 0x0 0x1000>,
@@ -3166,6 +3360,56 @@ glink-edge {
mboxes = <&apss_shared 4>;
label = "cdsp";
qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x1081 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x1082 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1083 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1084 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1085 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x1086 0x0>;
+ dma-coherent;
+ };
+ };
};
};
@@ -3317,6 +3561,119 @@ gem_noc: interconnect@9680000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ venus: video-codec@aa00000 {
+ compatible = "qcom,qcs615-venus", "qcom,sc7180-venus";
+ reg = <0x0 0x0aa00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+ <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+ <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+ clock-names = "core",
+ "iface",
+ "bus",
+ "vcodec0_core",
+ "vcodec0_bus";
+
+ power-domains = <&videocc VENUS_GDSC>,
+ <&videocc VCODEC0_GDSC>,
+ <&rpmhpd RPMHPD_CX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "cx";
+
+ operating-points-v2 = <&venus_opp_table>;
+
+ interconnects = <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "video-mem",
+ "cpu-cfg";
+
+ iommus = <&apps_smmu 0xe60 0x20>;
+
+ memory-region = <&pil_video_mem>;
+
+ status = "disabled";
+
+ venus_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-133330000 {
+ opp-hz = /bits/ 64 <133330000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-380000000 {
+ opp-hz = /bits/ 64 <380000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-410000000 {
+ opp-hz = /bits/ 64 <410000000>;
+ required-opps = <&rpmhpd_opp_nom_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+ };
+ };
+
+ videocc: clock-controller@ab00000 {
+ compatible = "qcom,qcs615-videocc";
+ reg = <0 0x0ab00000 0 0x10000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,qcs615-camcc";
+ reg = <0 0x0ad00000 0 0x10000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,qcs615-dispcc";
+ reg = <0 0x0af00000 0 0x20000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,qcs615-pdc", "qcom,pdc";
reg = <0x0 0x0b220000 0x0 0x30000>,
@@ -3456,6 +3813,7 @@ intc: interrupt-controller@17a00000 {
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
#redistributor-regions = <1>;
@@ -3473,6 +3831,7 @@ watchdog: watchdog@17c10000 {
compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt";
reg = <0x0 0x17c10000 0x0 0x1000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sleep_clk>;
};
timer@17c20000 {
@@ -3562,6 +3921,7 @@ apps_bcm_voter: bcm-voter {
rpmhcc: clock-controller {
compatible = "qcom,qcs615-rpmh-clk";
+ clocks = <&xo_board_clk>;
clock-names = "xo";
#clock-cells = <1>;
@@ -3803,6 +4163,17 @@ usb_2_dwc3: usb@a800000 {
};
};
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,qcs615-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c263000 0x0 0x1000>,
+ <0x0 0x0c222000 0x0 0x1000>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
+ };
+
remoteproc_adsp: remoteproc@62400000 {
compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas";
reg = <0x0 0x62400000 0x0 0x4040>;
@@ -3838,8 +4209,57 @@ glink_edge: glink-edge {
mboxes = <&apss_shared 24>;
label = "lpass";
qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1723 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1724 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1725 0x0>;
+ dma-coherent;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x1726 0x0>;
+ qcom,nsessions = <5>;
+ dma-coherent;
+ };
+ };
};
};
+
+ cpufreq_hw: cpufreq@18323000 {
+ compatible = "qcom,qcs615-cpufreq-hw", "qcom,cpufreq-hw";
+ reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ #clock-cells = <1>;
+ };
};
arch_timer: timer {
@@ -3849,4 +4269,198 @@ arch_timer: timer {
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ thermal-zones {
+ aoss-thermal {
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-0-thermal {
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpuss0-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-1-thermal {
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpuss1-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-2-thermal {
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpuss2-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-3-thermal {
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpuss3-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-0-thermal {
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-1-thermal {
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-2-thermal {
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-3-thermal {
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ gpu-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ q6-hvx-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdm-core-thermal {
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ mdm-core-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera-thermal {
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ camera-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ wlan-thermal {
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ wlan-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ display-thermal {
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ display-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ thermal-sensors = <&tsens0 15>;
+
+ trips {
+ video-critical {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index ff1eb2c..8459b27 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1351,6 +1351,13 @@ q6afecc: clock-controller {
compatible = "qcom,q6afe-clocks";
#clock-cells = <2>;
};
+
+ q6usbdai: usbd {
+ compatible = "qcom,q6usb";
+ iommus = <&apps_smmu 0x100f 0x0>;
+ #sound-dai-cells = <1>;
+ qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+ };
};
q6asm: service@7 {
@@ -1979,6 +1986,7 @@ usb_1_dwc3: usb@a600000 {
reg = <0x0 0x0a600000 0x0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x540 0x0>;
+ num-hc-interrupters = /bits/ 16 <3>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
snps,has-lpm-erratum;
@@ -2241,7 +2249,7 @@ opp-560000000 {
};
mdss_dp: displayport-controller@ae90000 {
- compatible = "qcom,sm6350-dp", "qcom,sm8350-dp";
+ compatible = "qcom,sm6350-dp", "qcom,sc7180-dp";
reg = <0x0 0xae90000 0x0 0x200>,
<0x0 0xae90200 0x0 0x200>,
<0x0 0xae90400 0x0 0x600>,
@@ -2479,6 +2487,11 @@ aoss_qmp: power-management@c300000 {
#clock-cells = <0>;
};
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0x0 0x0c3f0000 0x0 0x400>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0 0x0c440000 0x0 0x1100>,
@@ -2962,6 +2975,9 @@ wifi: wifi@18800000 {
};
};
+ sound: sound {
+ };
+
thermal-zones {
aoss0-thermal {
thermal-sensors = <&tsens0 0>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 52b16a4..4afbab5 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -19,6 +19,7 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/usb/pd.h>
#include "sm7225.dtsi"
#include "pm6150l.dtsi"
@@ -938,6 +939,12 @@ channel@644 {
};
};
+&q6asmdai {
+ dai@0 {
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+};
+
&qup_uart1_cts {
/*
* Configure a bias-bus-hold on CTS to lower power
@@ -1006,6 +1013,35 @@ &sdhc_2 {
status = "okay";
};
+&sound {
+ compatible = "fairphone,fp4-sndcard";
+ model = "Fairphone 4";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ usb-dai-link {
+ link-name = "USB Playback";
+
+ codec {
+ sound-dai = <&q6usbdai USB_RX>;
+ };
+
+ cpu {
+ sound-dai = <&q6afedai USB_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <13 4>, <56 2>;
diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
index befbb40..f16b47b 100644
--- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -1425,16 +1425,14 @@ &ufs_mem_phy {
&usb_1 {
/* USB 2.0 only */
qcom,select-utmi-as-pipe-clk;
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
maximum-speed = "high-speed";
/* Remove USB3 phy */
phys = <&usb_1_hsphy>;
phy-names = "usb2-phy";
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index e1e294f..0339a57 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -478,15 +478,11 @@ &mdss_dsi0 {
qcom,dual-dsi-mode;
qcom,master-dsi;
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_a>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
@@ -504,15 +500,11 @@ &mdss_dsi1 {
<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
status = "okay";
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_b>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi1_out {
+ remote-endpoint = <<9611_b>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi1_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index abf12e1..acdba79 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1866,10 +1866,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
@@ -1981,10 +1981,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
@@ -3890,16 +3890,20 @@ mdss_dp: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3908,7 +3912,7 @@ mdss_dp: displayport-controller@ae90000 {
#sound-dai-cells = <0>;
operating-points-v2 = <&dp_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
status = "disabled";
@@ -4366,6 +4370,7 @@ compute-cb@5 {
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
@@ -4419,7 +4424,7 @@ frame@17c25000 {
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x17c26000 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
new file mode 100644
index 0000000..cf3d917a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@9c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9c000000 0x0 0x2300000>;
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_n>;
+
+ key-vol-up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ reserved-memory {
+ cont_splash_mem: memory@9c000000 {
+ reg = <0x0 0x9c000000 0x0 0x2300000>;
+ no-map;
+ };
+
+ ramoops@9fa00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x9fa00000 0x0 0x100000>;
+ record-size = <0x4000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x40000>;
+ pmsg-size = <0x40000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vreg_s4a_1p8: smps4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-name = "vreg_l2a_3p1";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-name = "vreg_l9a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-name = "vreg_l17a_3p0";
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&pm8150_gpios {
+ vol_up_n: vol-up-n-state {
+ pins = "gpio3";
+ function = "normal";
+ power-source = <0>;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <40 4>; /* I2C (Unused) */
+};
+
+&usb_1 {
+ /* Limit to USB 2.0 for now */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l17a_3p0>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l6a_1p2>;
+ vccq-max-microamp = <800000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <800000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
new file mode 100644
index 0000000..dc7c3816
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+ model = "Samsung Galaxy S20 FE";
+ compatible = "samsung,r8q", "qcom,sm8250";
+ chassis-type = "handset";
+};
+
+&adsp {
+ firmware-name = "qcom/sm8250/Samsung/r8q/adsp.mbn";
+ status = "okay";
+};
+
+&cdsp {
+ firmware-name = "qcom/sm8250/Samsung/r8q/cdsp.mbn";
+ status = "okay";
+};
+
+&slpi {
+ firmware-name = "qcom/sm8250/Samsung/r8q/slpi.mbn";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
new file mode 100644
index 0000000..d6aeb5a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+ model = "Samsung Galaxy S20";
+ compatible = "samsung,x1q", "qcom,sm8250";
+ chassis-type = "handset";
+};
+
+&adsp {
+ firmware-name = "qcom/sm8250/Samsung/x1q/adsp.mbn";
+ status = "okay";
+};
+
+&cdsp {
+ firmware-name = "qcom/sm8250/Samsung/x1q/cdsp.mbn";
+ status = "okay";
+};
+
+&slpi {
+ firmware-name = "qcom/sm8250/Samsung/x1q/slpi.mbn";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
index 668078e..4ad2497 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -12,7 +12,6 @@
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
#include "pm8150l.dtsi"
-#include "pm8009.dtsi"
/*
* Delete following upstream (sm8250.dtsi) reserved
@@ -50,18 +49,12 @@ framebuffer: framebuffer@9c000000 {
};
};
- battery_l: battery-l {
+ battery: battery {
compatible = "simple-battery";
- voltage-min-design-microvolt = <3870000>;
- energy-full-design-microwatt-hours = <16700000>;
- charge-full-design-microamp-hours = <4420000>;
- };
-
- battery_r: battery-r {
- compatible = "simple-battery";
- voltage-min-design-microvolt = <3870000>;
- energy-full-design-microwatt-hours = <16700000>;
- charge-full-design-microamp-hours = <4420000>;
+ charge-full-design-microamp-hours = <8840000>;
+ energy-full-design-microwatt-hours = <34300000>;
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4370000>;
};
bl_vddpos_5p5: bl-vddpos-regulator {
@@ -406,63 +399,6 @@ vreg_l11c_3p0: ldo11 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
-
- regulators-2 {
- compatible = "qcom,pm8009-rpmh-regulators";
- qcom,pmic-id = "f";
-
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vreg_bob>;
- vdd-l2-supply = <&vreg_s8c_1p35>;
- vdd-l5-l6-supply = <&vreg_bob>;
- vdd-l7-supply = <&vreg_s4a_1p8>;
-
- vreg_s1f_1p2: smps1 {
- regulator-name = "vreg_s1f_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s2f_0p5: smps2 {
- regulator-name = "vreg_s2f_0p5";
- regulator-min-microvolt = <512000>;
- regulator-max-microvolt = <1100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /* L1 is unused. */
-
- vreg_l2f_1p3: ldo2 {
- regulator-name = "vreg_l2f_1p3";
- regulator-min-microvolt = <1056000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- /* L3 & L4 are unused. */
-
- vreg_l5f_2p8: ldo5 {
- regulator-name = "vreg_l5f_2p85";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l6f_2p8: ldo6 {
- regulator-name = "vreg_l6f_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7f_1p8: ldo7 {
- regulator-name = "vreg_l7f_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
};
&cdsp {
@@ -495,17 +431,6 @@ zap-shader {
};
};
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- fuel-gauge@55 {
- compatible = "ti,bq27z561";
- reg = <0x55>;
- monitored-battery = <&battery_r>;
- };
-};
-
&i2c11 {
clock-frequency = <400000>;
status = "okay";
@@ -523,17 +448,6 @@ backlight: backlight@11 {
};
};
-&i2c13 {
- clock-frequency = <400000>;
- status = "okay";
-
- fuel-gauge@55 {
- compatible = "ti,bq27z561";
- reg = <0x55>;
- monitored-battery = <&battery_l>;
- };
-};
-
&pcie0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index b30aea8..50dd114 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1030,7 +1030,7 @@ i2c14: i2c@880000 {
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
<&gpi_dma2 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1075,7 +1075,7 @@ i2c15: i2c@884000 {
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
<&gpi_dma2 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1120,7 +1120,7 @@ i2c16: i2c@888000 {
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
<&gpi_dma2 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1165,7 +1165,7 @@ i2c17: i2c@88c000 {
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1227,7 +1227,7 @@ i2c18: i2c@890000 {
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1289,7 +1289,7 @@ i2c19: i2c@894000 {
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
<&gpi_dma2 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1370,7 +1370,7 @@ i2c0: i2c@980000 {
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1415,7 +1415,7 @@ i2c1: i2c@984000 {
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1460,7 +1460,7 @@ i2c2: i2c@988000 {
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1522,7 +1522,7 @@ i2c3: i2c@98c000 {
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1567,7 +1567,7 @@ i2c4: i2c@990000 {
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1612,7 +1612,7 @@ i2c5: i2c@994000 {
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1657,7 +1657,7 @@ i2c6: i2c@998000 {
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1719,7 +1719,7 @@ i2c7: i2c@99c000 {
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
<&gpi_dma0 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1797,7 +1797,7 @@ i2c8: i2c@a80000 {
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1842,7 +1842,7 @@ i2c9: i2c@a84000 {
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1887,7 +1887,7 @@ i2c10: i2c@a88000 {
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1932,7 +1932,7 @@ i2c11: i2c@a8c000 {
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1977,7 +1977,7 @@ i2c12: i2c@a90000 {
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2039,7 +2039,7 @@ i2c13: i2c@a94000 {
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2163,10 +2163,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2285,10 +2285,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2412,10 +2412,10 @@ pcie2: pcie@1c10000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
<&gcc GCC_PCIE_2_AUX_CLK>,
@@ -4338,14 +4338,6 @@ venus: video-codec@aa00000 {
status = "disabled";
- video-decoder {
- compatible = "venus-decoder";
- };
-
- video-encoder {
- compatible = "venus-encoder";
- };
-
venus_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -4779,16 +4771,20 @@ mdss_dp: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4797,7 +4793,7 @@ mdss_dp: displayport-controller@ae90000 {
#sound-dai-cells = <0>;
operating-points-v2 = <&dp_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
status = "disabled";
@@ -6092,6 +6088,7 @@ compute-cb@5 {
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index f9de0e4..24a8c91e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -385,15 +385,11 @@ &cdsp {
&mdss_dsi0 {
vdda-supply = <&vreg_l6b_1p2>;
status = "okay";
+};
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_a>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 9a4207e..fc4ce9d 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1551,10 +1551,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1662,10 +1662,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2876,16 +2876,20 @@ mdss_dp: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3544,6 +3548,7 @@ apps_smmu: iommu@15000000 {
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
#redistributor-regions = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 2ff40a1..0c6aa7d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -1199,11 +1199,6 @@ &usb_1 {
status = "okay";
};
-&usb_1_dwc3 {
- dr_mode = "otg";
- usb-role-switch;
-};
-
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 8c39fbc..56db5f7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -28,6 +28,49 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ pmic-glink {
+ compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ };
+ };
+
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -461,8 +504,8 @@ &usb_1 {
status = "okay";
};
-&usb_1_dwc3 {
- dr_mode = "peripheral";
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_hsphy {
@@ -487,3 +530,7 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p91>;
};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
new file mode 100644
index 0000000..880d74a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350c.dtsi"
+
+/ {
+ model = "Samsung Galaxy S22 5G";
+ compatible = "samsung,r0q", "qcom,sm8450";
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@b8000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xb8000000 0x0 0x2b00000>;
+ width = <1080>;
+ height = <2340>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ /*
+ * The bootloader will only keep display hardware enabled
+ * if this memory region is named exactly 'splash_region'
+ */
+ splash-region@b8000000 {
+ reg = <0x0 0xb8000000 0x0 0x2b00000>;
+ no-map;
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_bob>;
+
+ vreg_l2b_3p07: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_0p88: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <888000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&vreg_bob>;
+ vdd-l2-l8-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <36 4>; /* SPI (not linked to anything) */
+};
+
+&usb_1 {
+ /* Keep USB 2.0 only for now */
+ qcom,select-utmi-as-pipe-clk;
+
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l5b_0p88>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+ vdda33-supply = <&vreg_l2b_3p07>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index cc1335a..6bd315e 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -781,11 +781,8 @@ &uart7 {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "peripheral";
+ status = "okay";
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 33574ad..23420e6 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1987,10 +1987,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
@@ -2151,10 +2151,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
@@ -3199,8 +3199,10 @@ videocc: clock-controller@aaf0000 {
reg = <0 0x0aaf0000 0 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_VIDEO_AHB_CLK>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -3291,12 +3293,13 @@ camcc: clock-controller@ade0000 {
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- status = "disabled";
};
mdss: display-subsystem@ae00000 {
@@ -3431,16 +3434,20 @@ mdss_dp0: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -5417,13 +5424,10 @@ opp-202000000 {
};
};
- usb_1: usb@a6f8800 {
- compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
+ usb_1: usb@a600000 {
+ compatible = "qcom,sm8450-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a600000 0 0xfc100>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -5442,12 +5446,14 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -5461,36 +5467,32 @@ usb_1: usb@a6f8800 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xcd00>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x0 0x0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_u3_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy", "usb3-phy";
+ iommus = <&apps_smmu 0x0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+ usb-role-switch;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- usb_1_dwc3_hs: endpoint {
- };
+ usb_1_dwc3_hs: endpoint {
};
+ };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- usb_1_dwc3_ss: endpoint {
- remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
- };
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 9dfb248..b5d7f0c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -859,8 +859,8 @@ vreg_l5n_1p8: ldo5 {
vreg_l6n_3p3: ldo6 {
regulator-name = "vreg_l6n_3p3";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3304000>;
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -1002,10 +1002,6 @@ &mdss_dp0 {
status = "okay";
};
-&mdss_dp0_out {
- data-lanes = <0 1>;
-};
-
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index fdcecd4..38f2928 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -626,8 +626,8 @@ vreg_l5n_1p8: ldo5 {
vreg_l6n_3p3: ldo6 {
regulator-name = "vreg_l6n_3p3";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3304000>;
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -738,10 +738,6 @@ &mdss_dp0 {
status = "okay";
};
-&mdss_dp0_out {
- data-lanes = <0 1>;
-};
-
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 49438a7e..a3f4200 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -702,8 +702,8 @@ vreg_l5n_1p8: ldo5 {
vreg_l6n_3p3: ldo6 {
regulator-name = "vreg_l6n_3p3";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3304000>;
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -857,10 +857,6 @@ &mdss_dp0 {
status = "okay";
};
-&mdss_dp0_out {
- data-lanes = <0 1>;
-};
-
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index 7d29a57..b4ef40a 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -487,8 +487,8 @@ vreg_l5n_1p8: ldo5 {
vreg_l6n_3p3: ldo6 {
regulator-name = "vreg_l6n_3p3";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3304000>;
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 45713d4..7724dba 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -399,22 +399,22 @@ memory@a0000000 {
pmu-a510 {
compatible = "arm,cortex-a510-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
};
pmu-a710 {
compatible = "arm,cortex-a710-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
};
pmu-a715 {
compatible = "arm,cortex-a715-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster2>;
};
pmu-x3 {
compatible = "arm,cortex-x3-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster3>;
};
psci {
@@ -842,7 +842,7 @@ gcc: clock-controller@100000 {
ipcc: mailbox@408000 {
compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
reg = <0 0x00408000 0 0x1000>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-controller;
#interrupt-cells = <3>;
#mbox-cells = <2>;
@@ -852,18 +852,18 @@ gpi_dma2: dma-controller@800000 {
compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
#dma-cells = <3>;
reg = <0 0x00800000 0 0x60000>;
- interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>;
dma-channels = <12>;
dma-channel-mask = <0x3e>;
iommus = <&apps_smmu 0x436 0>;
@@ -891,7 +891,7 @@ i2c8: i2c@880000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_data_clk>;
- interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -914,7 +914,7 @@ spi8: spi@880000 {
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
- interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -941,7 +941,7 @@ i2c9: i2c@884000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_data_clk>;
- interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -964,7 +964,7 @@ spi9: spi@884000 {
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
- interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -991,7 +991,7 @@ i2c10: i2c@888000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_data_clk>;
- interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1014,7 +1014,7 @@ spi10: spi@888000 {
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
- interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1041,7 +1041,7 @@ i2c11: i2c@88c000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_data_clk>;
- interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1064,7 +1064,7 @@ spi11: spi@88c000 {
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
- interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1091,7 +1091,7 @@ i2c12: i2c@890000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_data_clk>;
- interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1114,7 +1114,7 @@ spi12: spi@890000 {
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
- interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1141,7 +1141,7 @@ i2c13: i2c@894000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_data_clk>;
- interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1164,7 +1164,7 @@ spi13: spi@894000 {
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
- interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1191,7 +1191,7 @@ uart14: serial@898000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
- interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
@@ -1209,7 +1209,7 @@ i2c15: i2c@89c000 {
clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_data_clk>;
- interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1232,7 +1232,7 @@ spi15: spi@89c000 {
reg = <0 0x0089c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
- interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1271,7 +1271,7 @@ i2c_hub_0: i2c@980000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c0_data_clk>;
- interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1292,7 +1292,7 @@ i2c_hub_1: i2c@984000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c1_data_clk>;
- interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1313,7 +1313,7 @@ i2c_hub_2: i2c@988000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c2_data_clk>;
- interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1334,7 +1334,7 @@ i2c_hub_3: i2c@98c000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c3_data_clk>;
- interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1355,7 +1355,7 @@ i2c_hub_4: i2c@990000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c4_data_clk>;
- interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1376,7 +1376,7 @@ i2c_hub_5: i2c@994000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c5_data_clk>;
- interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1397,7 +1397,7 @@ i2c_hub_6: i2c@998000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c6_data_clk>;
- interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1418,7 +1418,7 @@ i2c_hub_7: i2c@99c000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c7_data_clk>;
- interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1439,7 +1439,7 @@ i2c_hub_8: i2c@9a0000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c8_data_clk>;
- interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1460,7 +1460,7 @@ i2c_hub_9: i2c@9a4000 {
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c9_data_clk>;
- interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1478,18 +1478,18 @@ gpi_dma1: dma-controller@a00000 {
compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
#dma-cells = <3>;
reg = <0 0x00a00000 0 0x60000>;
- interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
dma-channels = <12>;
dma-channel-mask = <0x1e>;
iommus = <&apps_smmu 0xb6 0>;
@@ -1520,7 +1520,7 @@ i2c0: i2c@a80000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_data_clk>;
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1543,7 +1543,7 @@ spi0: spi@a80000 {
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1570,7 +1570,7 @@ i2c1: i2c@a84000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_data_clk>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1593,7 +1593,7 @@ spi1: spi@a84000 {
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1620,7 +1620,7 @@ i2c2: i2c@a88000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_data_clk>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1643,7 +1643,7 @@ spi2: spi@a88000 {
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1670,7 +1670,7 @@ i2c3: i2c@a8c000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c3_data_clk>;
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1693,7 +1693,7 @@ spi3: spi@a8c000 {
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1720,7 +1720,7 @@ i2c4: i2c@a90000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_data_clk>;
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1743,7 +1743,7 @@ spi4: spi@a90000 {
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1770,7 +1770,7 @@ i2c5: i2c@a94000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_data_clk>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
@@ -1793,7 +1793,7 @@ spi5: spi@a94000 {
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1820,7 +1820,7 @@ i2c6: i2c@a98000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_data_clk>;
- interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
@@ -1843,7 +1843,7 @@ spi6: spi@a98000 {
reg = <0 0x00a98000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
- interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1870,7 +1870,7 @@ uart7: serial@a9c000 {
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
- interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
interconnect-names = "qup-core", "qup-config";
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1961,15 +1961,15 @@ pcie0: pcie@1c00000 {
linux,pci-domain = <0>;
num-lanes = <2>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "msi0",
"msi1",
"msi2",
@@ -1981,10 +1981,10 @@ pcie0: pcie@1c00000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -2122,15 +2122,15 @@ pcie1: pcie@1c08000 {
linux,pci-domain = <1>;
num-lanes = <2>;
- interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "msi0",
"msi1",
"msi2",
@@ -2142,10 +2142,10 @@ pcie1: pcie@1c08000 {
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2280,7 +2280,7 @@ pcie1_phy: phy@1c0e000 {
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0x0 0x01dc4000 0x0 0x28000>;
- interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
qcom,ee = <0>;
qcom,num-ees = <4>;
@@ -2327,7 +2327,7 @@ ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
reg = <0x0 0x01d84000 0x0 0x3000>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
@@ -2440,7 +2440,7 @@ gpu: gpu@3d00000 {
"cx_mem",
"cx_dbgc";
- interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
iommus = <&adreno_smmu 0 0x0>,
<&adreno_smmu 1 0x0>;
@@ -2521,8 +2521,8 @@ gmu: gmu@3d6a000 {
<0x0 0x0b280000 0x0 0x10000>;
reg-names = "gmu", "rscc", "gmu_pdc";
- interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "hfi", "gmu";
clocks = <&gpucc GPU_CC_AHB_CLK>,
@@ -2583,32 +2583,32 @@ adreno_smmu: iommu@3da0000 {
reg = <0x0 0x03da0000 0x0 0x40000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
- interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>,
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
@@ -2633,8 +2633,8 @@ ipa: ipa@3f40000 {
"ipa-shared",
"gsi";
- interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
- <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING 0>,
+ <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH 0>,
<&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ipa",
@@ -2666,7 +2666,7 @@ remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sm8550-mpss-pas";
reg = <0x0 0x04080000 0x0 0x10000>;
- interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>,
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2854,7 +2854,7 @@ lpass_wsa2macro: codec@6aa0000 {
swr3: soundwire@6ab0000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06ab0000 0 0x10000>;
- interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lpass_wsa2macro>;
clock-names = "iface";
label = "WSA2";
@@ -2898,7 +2898,7 @@ lpass_rxmacro: codec@6ac0000 {
swr1: soundwire@6ad0000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06ad0000 0 0x10000>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lpass_rxmacro>;
clock-names = "iface";
label = "RX";
@@ -2956,7 +2956,7 @@ lpass_wsamacro: codec@6b00000 {
swr0: soundwire@6b10000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06b10000 0 0x10000>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lpass_wsamacro>;
clock-names = "iface";
label = "WSA";
@@ -2986,8 +2986,8 @@ swr0: soundwire@6b10000 {
swr2: soundwire@6d30000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06d30000 0 0x10000>;
- interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "core", "wakeup";
clocks = <&lpass_txmacro>;
clock-names = "iface";
@@ -3169,8 +3169,8 @@ sdhc_2: mmc@8804000 {
compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
- interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
@@ -3225,7 +3225,7 @@ iris: video-codec@aa00000 {
compatible = "qcom,sm8550-iris";
reg = <0 0x0aa00000 0 0xf0000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
<&videocc VIDEO_CC_MVS0_GDSC>,
@@ -3262,7 +3262,7 @@ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
/*
* IRIS firmware is signed by vendors, only
- * enable in boards where the proper signed firmware
+ * enable on boards where the proper signed firmware
* is available.
*/
status = "disabled";
@@ -3307,8 +3307,10 @@ videocc: clock-controller@aaf0000 {
reg = <0 0x0aaf0000 0 0x10000>;
clocks = <&bi_tcxo_div2>,
<&gcc GCC_VIDEO_AHB_CLK>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -3317,7 +3319,7 @@ videocc: clock-controller@aaf0000 {
cci0: cci@ac15000 {
compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
reg = <0 0x0ac15000 0 0x1000>;
- interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
<&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3350,7 +3352,7 @@ cci0_i2c1: i2c-bus@1 {
cci1: cci@ac16000 {
compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
reg = <0 0x0ac16000 0 0x1000>;
- interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
<&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3376,7 +3378,7 @@ cci1_i2c0: i2c-bus@0 {
cci2: cci@ac17000 {
compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
reg = <0 0x0ac17000 0 0x1000>;
- interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING 0>;
power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
<&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3521,24 +3523,24 @@ camss: isp@acb7000 {
"vfe_lite_cphy_rx",
"vfe_lite_csid";
- interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 278 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 277 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 602 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 604 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 688 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 606 IRQ_TYPE_EDGE_RISING 0>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING 0>;
interrupt-names = "csid0",
"csid1",
"csid2",
@@ -3623,8 +3625,10 @@ camcc: clock-controller@ade0000 {
<&bi_tcxo_div2>,
<&bi_tcxo_ao_div2>,
<&sleep_clk>;
- power-domains = <&rpmhpd SM8550_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -3635,7 +3639,7 @@ mdss: display-subsystem@ae00000 {
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-controller;
#interrupt-cells = <1>;
@@ -3755,16 +3759,20 @@ mdss_dp0: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3791,6 +3799,7 @@ mdss_dp0_in: endpoint {
port@1 {
reg = <1>;
mdss_dp0_out: endpoint {
+ data-lanes = <0 1 2 3>;
remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
};
@@ -4051,6 +4060,7 @@ usb_dp_qmpphy: phy@88e8000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ mode-switch;
orientation-switch;
status = "disabled";
@@ -4084,12 +4094,11 @@ usb_dp_qmpphy_dp_in: endpoint {
};
};
- usb_1: usb@a6f8800 {
- compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
- reg = <0x0 0x0a6f8800 0x0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_1: usb@a600000 {
+ compatible = "qcom,sm8550-dwc3", "qcom,snps-dwc3";
+ reg = <0x0 0x0a600000 0x0 0xfc100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4108,12 +4117,14 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -4130,47 +4141,46 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
&config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
interconnect-names = "usb-ddr", "apps-usb";
+ iommus = <&apps_smmu 0x40 0x0>;
+
+ phys = <&usb_1_hsphy>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+
+ dma-coherent;
+
+ usb-role-switch;
+
status = "disabled";
- usb_1_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x0a600000 0x0 0xcd00>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x40 0x0>;
- phys = <&usb_1_hsphy>,
- <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,hird-threshold = /bits/ 8 <0x0>;
- snps,usb2-gadget-lpm-disable;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,is-utmi-l1-suspend;
- snps,usb3_lpm_capable;
- snps,usb2-lpm-disable;
- snps,has-lpm-erratum;
- tx-fifo-resize;
- dma-coherent;
- usb-role-switch;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ port@0 {
+ reg = <0>;
- port@0 {
- reg = <0>;
-
- usb_1_dwc3_hs: endpoint {
- };
+ usb_1_dwc3_hs: endpoint {
};
+ };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- usb_1_dwc3_ss: endpoint {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
- };
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
};
};
@@ -4192,8 +4202,8 @@ tsens0: thermal-sensor@c271000 {
reg = <0 0x0c271000 0 0x1000>, /* TM */
<0 0x0c222000 0 0x1000>; /* SROT */
#qcom,sensors = <16>;
- interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -4203,8 +4213,8 @@ tsens1: thermal-sensor@c272000 {
reg = <0 0x0c272000 0 0x1000>, /* TM */
<0 0x0c223000 0 0x1000>; /* SROT */
#qcom,sensors = <16>;
- interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -4214,8 +4224,8 @@ tsens2: thermal-sensor@c273000 {
reg = <0 0x0c273000 0 0x1000>, /* TM */
<0 0x0c224000 0 0x1000>; /* SROT */
#qcom,sensors = <16>;
- interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -4259,7 +4269,7 @@ spmi_bus: spmi@c400000 {
tlmm: pinctrl@f100000 {
compatible = "qcom,sm8550-tlmm";
reg = <0 0x0f100000 0 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -4953,103 +4963,103 @@ apps_smmu: iommu@15000000 {
reg = <0 0x15000000 0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>;
dma-coherent;
};
@@ -5058,14 +5068,32 @@ intc: interrupt-controller@17100000 {
reg = <0 0x17100000 0 0x10000>, /* GICD */
<0 0x17180000 0 0x200000>; /* GICR * 8 */
ranges;
- #interrupt-cells = <3>;
+ #interrupt-cells = <4>;
interrupt-controller;
#redistributor-regions = <1>;
redistributor-stride = <0 0x40000>;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
#address-cells = <2>;
#size-cells = <2>;
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu3 &cpu4>;
+ };
+
+ ppi_cluster2: interrupt-partition-2 {
+ affinity = <&cpu5 &cpu6>;
+ };
+
+ ppi_cluster3: interrupt-partition-3 {
+ affinity = <&cpu7>;
+ };
+ };
+
gic_its: msi-controller@17140000 {
compatible = "arm,gic-v3-its";
reg = <0 0x17140000 0 0x20000>;
@@ -5085,49 +5113,49 @@ frame@17421000 {
reg = <0x17421000 0x1000>,
<0x17422000 0x1000>;
frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
};
frame@17423000 {
reg = <0x17423000 0x1000>;
frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@17425000 {
reg = <0x17425000 0x1000>;
frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@17427000 {
reg = <0x17427000 0x1000>;
frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@17429000 {
reg = <0x17429000 0x1000>;
frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@1742b000 {
reg = <0x1742b000 0x1000>;
frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@1742d000 {
reg = <0x1742d000 0x1000>;
frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
};
@@ -5140,9 +5168,9 @@ apps_rsc: rsc@17a00000 {
<0 0x17a20000 0 0x10000>,
<0 0x17a30000 0 0x10000>;
reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
@@ -5239,9 +5267,9 @@ cpufreq_hw: cpufreq@17d91000 {
reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
clock-names = "xo", "alternate";
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
#freq-domain-cells = <1>;
#clock-cells = <1>;
@@ -5250,7 +5278,7 @@ cpufreq_hw: cpufreq@17d91000 {
pmu@24091000 {
compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
reg = <0 0x24091000 0 0x1000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -5300,7 +5328,7 @@ opp-8 {
pmu@240b6400 {
compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
reg = <0 0x240b6400 0 0x600>;
- interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
&gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -5356,7 +5384,7 @@ system-cache-controller@25000000 {
"llcc3_base",
"llcc_broadcast_base",
"llcc_broadcast_and_base";
- interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH 0>;
};
nsp_noc: interconnect@320c0000 {
@@ -5370,7 +5398,7 @@ remoteproc_cdsp: remoteproc@32300000 {
compatible = "qcom,sm8550-cdsp-pas";
reg = <0x0 0x32300000 0x0 0x10000>;
- interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -6552,9 +6580,9 @@ trip-point2 {
timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
index cb10253..5a594d7 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
@@ -60,19 +60,10 @@ panel0_in: endpoint {
};
};
};
+};
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- mdss_dsi0_out: endpoint {
- remote-endpoint = <&panel0_in>;
- };
- };
- };
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
};
&spi4 {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
index 259649d..87d7190 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
@@ -941,10 +941,6 @@ &mdss_dp0 {
status = "okay";
};
-&mdss_dp0_out {
- data-lanes = <0 1>;
-};
-
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1050,10 +1046,6 @@ &pm8550b_eusb2_repeater {
vdd3-supply = <&vreg_l5b_3p1>;
};
-&pmk8550_rtc {
- status = "okay";
-};
-
&pon_pwrkey {
status = "okay";
};
@@ -1310,12 +1302,10 @@ &ufs_mem_phy {
*/
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index 8a957ad..c67bbac 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -857,12 +857,10 @@ &ufs_mem_phy {
*/
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
index 7552d5d..9e790cf 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -892,10 +892,6 @@ &mdss_dp0 {
status = "okay";
};
-&mdss_dp0_out {
- data-lanes = <0 1>;
-};
-
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1006,10 +1002,6 @@ &pm8550b_eusb2_repeater {
vdd3-supply = <&vreg_l5b_3p1>;
};
-&pmk8550_rtc {
- status = "okay";
-};
-
&qup_i2c3_data_clk {
/* Use internal I2C pull-up */
bias-pull-up = <2200>;
@@ -1293,12 +1285,10 @@ &ufs_mem_phy {
*/
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index e14d3d7..ebf1971 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3490,6 +3490,11 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
};
};
+ rng: rng@10c3000 {
+ compatible = "qcom,sm8650-trng", "qcom,trng";
+ reg = <0 0x010c3000 0 0x1000>;
+ };
+
cnoc_main: interconnect@1500000 {
compatible = "qcom,sm8650-cnoc-main";
reg = <0 0x01500000 0 0x14080>;
@@ -3561,11 +3566,6 @@ mmss_noc: interconnect@1780000 {
#interconnect-cells = <2>;
};
- rng: rng@10c3000 {
- compatible = "qcom,sm8650-trng", "qcom,trng";
- reg = <0 0x010c3000 0 0x1000>;
- };
-
pcie0: pcie@1c00000 {
device_type = "pci";
compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
@@ -3629,10 +3629,10 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
iommu-map = <0 &apps_smmu 0x1400 0x1>,
<0x100 &apps_smmu 0x1401 0x1>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH 0>,
- <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH 0>,
- <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH 0>,
- <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-map-mask = <0 0 0 0x7>;
#interrupt-cells = <1>;
@@ -3809,10 +3809,10 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
iommu-map = <0 &apps_smmu 0x1480 0x1>,
<0x100 &apps_smmu 0x1481 0x1>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH 0>,
- <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH 0>,
- <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH 0>,
- <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-map-mask = <0 0 0 0x7>;
#interrupt-cells = <1>;
@@ -3926,38 +3926,6 @@ pcie1_phy: phy@1c0e000 {
status = "disabled";
};
- cryptobam: dma-controller@1dc4000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0 0x01dc4000 0 0x28000>;
-
- interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
-
- #dma-cells = <1>;
-
- iommus = <&apps_smmu 0x480 0>,
- <&apps_smmu 0x481 0>;
-
- qcom,ee = <0>;
- qcom,num-ees = <4>;
- num-channels = <20>;
- qcom,controlled-remotely;
- };
-
- crypto: crypto@1dfa000 {
- compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
- reg = <0 0x01dfa000 0 0x6000>;
-
- interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "memory";
-
- dmas = <&cryptobam 4>, <&cryptobam 5>;
- dma-names = "rx", "tx";
-
- iommus = <&apps_smmu 0x480 0>,
- <&apps_smmu 0x481 0>;
- };
-
ufs_mem_phy: phy@1d80000 {
compatible = "qcom,sm8650-qmp-ufs-phy";
reg = <0 0x01d80000 0 0x2000>;
@@ -4079,6 +4047,38 @@ ice: crypto@1d88000 {
clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
};
+ cryptobam: dma-controller@1dc4000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0 0x01dc4000 0 0x28000>;
+
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ #dma-cells = <1>;
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+
+ qcom,ee = <0>;
+ qcom,num-ees = <4>;
+ num-channels = <20>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@1dfa000 {
+ compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+ reg = <0 0x01dfa000 0 0x6000>;
+
+ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "memory";
+
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0 0x01f40000 0 0x20000>;
@@ -4127,72 +4127,84 @@ zap-shader {
/* Speedbin needs more work on A740+, keep only lower freqs */
gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-adreno",
+ "operating-points-v2";
opp-231000000 {
opp-hz = /bits/ 64 <231000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
opp-peak-kBps = <2136718>;
+ qcom,opp-acd-level = <0xc82f5ffd>;
};
opp-310000000 {
opp-hz = /bits/ 64 <310000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
opp-peak-kBps = <2136718>;
+ qcom,opp-acd-level = <0xc82c5ffd>;
};
opp-366000000 {
opp-hz = /bits/ 64 <366000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
opp-peak-kBps = <6074218>;
+ qcom,opp-acd-level = <0xc02e5ffd>;
};
opp-422000000 {
opp-hz = /bits/ 64 <422000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <8171875>;
+ qcom,opp-acd-level = <0xc02d5ffd>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
opp-peak-kBps = <8171875>;
+ qcom,opp-acd-level = <0xc02a5ffd>;
};
opp-578000000 {
opp-hz = /bits/ 64 <578000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <8171875>;
+ qcom,opp-acd-level = <0x882c5ffd>;
};
opp-629000000 {
opp-hz = /bits/ 64 <629000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
opp-peak-kBps = <10687500>;
+ qcom,opp-acd-level = <0x882a5ffd>;
};
opp-680000000 {
opp-hz = /bits/ 64 <680000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <12449218>;
+ qcom,opp-acd-level = <0x882a5ffd>;
};
opp-720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
opp-peak-kBps = <12449218>;
+ qcom,opp-acd-level = <0x882a5ffd>;
};
opp-770000000 {
opp-hz = /bits/ 64 <770000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <12449218>;
+ qcom,opp-acd-level = <0x882a5ffd>;
};
opp-834000000 {
opp-hz = /bits/ 64 <834000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <14398437>;
+ qcom,opp-acd-level = <0x882a5ffd>;
};
};
};
@@ -4962,6 +4974,171 @@ opp-202000000 {
};
};
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sm8650-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e3000 0 0x154>;
+
+ clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_dp_qmpphy: phy@88e8000 {
+ compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+ reg = <0 0x088e8000 0 0x3000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc USB3_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ mode-switch;
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp0_out>;
+ };
+ };
+ };
+ };
+
+ usb_1: usb@a600000 {
+ compatible = "qcom,sm8650-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a600000 0 0xfc100>;
+
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&pdc 14 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&tcsr TCSR_USB3_CLKREF_EN>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ phys = <&usb_1_hsphy>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ iommus = <&apps_smmu 0x40 0>;
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+
+ dma-coherent;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
+
iris: video-codec@aa00000 {
compatible = "qcom,sm8650-iris";
reg = <0 0x0aa00000 0 0xf0000>;
@@ -5009,7 +5186,7 @@ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
/*
* IRIS firmware is signed by vendors, only
- * enable in boards where the proper signed firmware
+ * enable on boards where the proper signed firmware
* is available.
*/
status = "disabled";
@@ -5060,7 +5237,8 @@ videocc: clock-controller@aaf0000 {
reg = <0 0x0aaf0000 0 0x10000>;
clocks = <&bi_tcxo_div2>,
<&gcc GCC_VIDEO_AHB_CLK>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -5172,7 +5350,8 @@ camcc: clock-controller@ade0000 {
<&bi_tcxo_div2>,
<&bi_tcxo_ao_div2>,
<&sleep_clk>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -5481,16 +5660,20 @@ mdss_dp0: displayport-controller@af54000 {
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&dp_opp_table>;
@@ -5544,6 +5727,7 @@ port@1 {
reg = <1>;
mdss_dp0_out: endpoint {
+ data-lanes = <0 1 2 3>;
remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
};
@@ -5580,176 +5764,6 @@ dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
};
- usb_1_hsphy: phy@88e3000 {
- compatible = "qcom,sm8650-snps-eusb2-phy",
- "qcom,sm8550-snps-eusb2-phy";
- reg = <0 0x088e3000 0 0x154>;
-
- clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
- clock-names = "ref";
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb_dp_qmpphy: phy@88e8000 {
- compatible = "qcom,sm8650-qmp-usb3-dp-phy";
- reg = <0 0x088e8000 0 0x3000>;
-
- clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "aux",
- "ref",
- "com_aux",
- "usb3_pipe";
-
- resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
- <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
- reset-names = "phy",
- "common";
-
- power-domains = <&gcc USB3_PHY_GDSC>;
-
- #clock-cells = <1>;
- #phy-cells = <1>;
-
- orientation-switch;
-
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- usb_dp_qmpphy_out: endpoint {
- };
- };
-
- port@1 {
- reg = <1>;
-
- usb_dp_qmpphy_usb_ss_in: endpoint {
- remote-endpoint = <&usb_1_dwc3_ss>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- usb_dp_qmpphy_dp_in: endpoint {
- remote-endpoint = <&mdss_dp0_out>;
- };
- };
- };
- };
-
- usb_1: usb@a6f8800 {
- compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
-
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
- <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
- <&pdc 14 IRQ_TYPE_EDGE_RISING>,
- <&pdc 15 IRQ_TYPE_EDGE_RISING>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
- "hs_phy_irq",
- "dp_hs_phy_irq",
- "dm_hs_phy_irq",
- "ss_phy_irq";
-
- clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&tcsr TCSR_USB3_CLKREF_EN>;
- clock-names = "cfg_noc",
- "core",
- "iface",
- "sleep",
- "mock_utmi",
- "xo";
-
- assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <200000000>;
-
- resets = <&gcc GCC_USB30_PRIM_BCR>;
-
- interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
- interconnect-names = "usb-ddr",
- "apps-usb";
-
- power-domains = <&gcc USB30_PRIM_GDSC>;
- required-opps = <&rpmhpd_opp_nom>;
-
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- status = "disabled";
-
- usb_1_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xcd00>;
-
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
-
- iommus = <&apps_smmu 0x40 0>;
-
- phys = <&usb_1_hsphy>,
- <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy",
- "usb3-phy";
-
- snps,hird-threshold = /bits/ 8 <0x0>;
- snps,usb2-gadget-lpm-disable;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,is-utmi-l1-suspend;
- snps,usb3_lpm_capable;
- snps,usb2-lpm-disable;
- snps,has-lpm-erratum;
- tx-fifo-resize;
-
- dma-coherent;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- usb_1_dwc3_hs: endpoint {
- };
- };
-
- port@1 {
- reg = <1>;
-
- usb_1_dwc3_ss: endpoint {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
- };
- };
- };
- };
- };
-
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8650-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 75cfbb5..3bbb53b 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -201,6 +201,74 @@ vph_pwr: vph-pwr-regulator {
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * MTPs rev 2.0 (power grid v8) come with two different WiFi chips:
+ * WCN7850 and WCN786x.
+ * Device nodes here for the PMU, WiFi and Bluetooth describe the MTP
+ * variant with WCN7850.
+ */
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en>, <&bt_default>;
+
+ wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&pm8550ve_f_gpios 3 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s5f_0p85>;
+ vddio-supply = <&vreg_l3f_1p8>;
+ vddio1p2-supply = <&vreg_l2f_1p2>;
+ vddaon-supply = <&vreg_s4d_0p85>;
+ vdddig-supply = <&vreg_s1d_0p97>;
+ vddrfa1p2-supply = <&vreg_s7i_1p2>;
+ vddrfa1p8-supply = <&vreg_s3g_1p8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
@@ -426,7 +494,7 @@ vreg_s3d_1p2: smps3 {
vreg_s4d_0p85: smps4 {
regulator-name = "vreg_s4d_0p85";
- regulator-min-microvolt = <500000>;
+ regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1036000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -472,9 +540,9 @@ regulators-2 {
qcom,pmic-id = "f";
- vreg_s5f_0p5: smps5 {
- regulator-name = "vreg_s5f_0p5";
- regulator-min-microvolt = <500000>;
+ vreg_s5f_0p85: smps5 {
+ regulator-name = "vreg_s5f_0p85";
+ regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -891,6 +959,40 @@ &pon_resin {
status = "okay";
};
+&pcie0 {
+ wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1f_0p88>;
+ vdda-pll-supply = <&vreg_l3g_1p2>;
+
+ status = "okay";
+};
+
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
&pmih0108_eusb2_repeater {
status = "okay";
@@ -902,6 +1004,10 @@ &qupv3_1 {
status = "okay";
};
+&qupv3_2 {
+ status = "okay";
+};
+
&remoteproc_adsp {
firmware-name = "qcom/sm8750/adsp.mbn",
"qcom/sm8750/adsp_dtb.mbn";
@@ -938,6 +1044,13 @@ left_spkr: speaker@0,1 {
sound-name-prefix = "SpkrLeft";
#thermal-sensor-cells = <0>;
vdd-supply = <&vreg_l15b_1p8>;
+ /*
+ * WSA8835 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
+ * WSA8835 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
+ * WSA8835 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
+ * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+ */
+ qcom,port-mapping = <1 2 3 10>;
};
/* WSA883x, right/back speaker */
@@ -951,6 +1064,13 @@ right_spkr: speaker@0,2 {
sound-name-prefix = "SpkrRight";
#thermal-sensor-cells = <0>;
vdd-supply = <&vreg_l15b_1p8>;
+ /*
+ * WSA8835 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
+ * WSA8835 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
+ * WSA8835 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
+ * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+ */
+ qcom,port-mapping = <4 5 6 11>;
};
};
@@ -1021,6 +1141,14 @@ spkr_1_sd_n_active: spkr-1-sd-n-active-state {
};
&tlmm {
+ bt_default: bt-default-state {
+ sw-ctrl-pins {
+ pins = "gpio18";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
wcd_default: wcd-reset-n-active-state {
pins = "gpio101";
function = "gpio";
@@ -1028,6 +1156,31 @@ wcd_default: wcd-reset-n-active-state {
bias-disable;
output-low;
};
+
+ wlan_en: wlan-en-state {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+ max-speed = <3200000>;
+ };
};
&ufs_mem_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 46437050..a82d986 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -631,7 +631,7 @@ gcc: clock-controller@100000 {
clocks = <&bi_tcxo_div2>,
<0>,
<&sleep_clk>,
- <0>,
+ <&pcie0_phy>,
<0>,
<0>,
<0>,
@@ -3304,6 +3304,184 @@ gic_its: msi-controller@16040000 {
};
};
+ pcie0: pcie@1c00000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-sm8750", "qcom,pcie-sm8550";
+ reg = <0x0 0x01c00000 0x0 0x3000>,
+ <0x0 0x40000000 0x0 0xf1d>,
+ <0x0 0x40000f20 0x0 0xa8>,
+ <0x0 0x40001000 0x0 0x1000>,
+ <0x0 0x40100000 0x0 0x100000>,
+ <0x0 0x01C03000 0x0 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config",
+ "mhi";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x23d00000>,
+ <0x03000000 0x4 0x00000000 0x4 0x00000000 0x3 0x00000000>;
+ bus-range = <0x00 0xff>;
+
+ dma-coherent;
+
+ linux,pci-domain = <0>;
+
+ msi-map = <0x0 &gic_its 0x1400 0x1>,
+ <0x100 &gic_its 0x1401 0x1>;
+ msi-map-mask = <0xff00>;
+
+ num-lanes = <2>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+ <0x100 &apps_smmu 0x1401 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+ operating-points-v2 = <&pcie0_opp_table>;
+
+ status = "disabled";
+
+ pcie0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* GEN 1 x1 */
+ opp-2500000 {
+ opp-hz = /bits/ 64 <2500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <250000 1>;
+ };
+
+ /* GEN 1 x2 and GEN 2 x1 */
+ opp-5000000 {
+ opp-hz = /bits/ 64 <5000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <500000 1>;
+ };
+
+ /* GEN 2 x2 */
+ opp-10000000 {
+ opp-hz = /bits/ 64 <10000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <1000000 1>;
+ };
+
+ /* GEN 3 x1 */
+ opp-8000000 {
+ opp-hz = /bits/ 64 <8000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <984500 1>;
+ };
+
+ /* GEN 3 x2 */
+ opp-16000000 {
+ opp-hz = /bits/ 64 <16000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <1969000 1>;
+ };
+
+ };
+
+ pcieport0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ phys = <&pcie0_phy>;
+ };
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8750-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c06000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&tcsrcc TCSR_PCIE_0_CLKREF_EN>,
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ power-domains = <&gcc GCC_PCIE_0_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
ufs_mem_phy: phy@1d80000 {
compatible = "qcom,sm8750-qmp-ufs-phy";
reg = <0x0 0x01d80000 0x0 0x2000>;
@@ -3617,6 +3795,82 @@ frame@1680d000 {
};
};
+ /* cluster0 */
+ pmu@240b3400 {
+ compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x240b3400 0x0 0x600>;
+
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ nonposted-mmio;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <800000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <2188000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <5414400>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <6220800>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <6835200>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <8371200>;
+ };
+
+ opp-6 {
+ opp-peak-kBps = <10944000>;
+ };
+
+ opp-7 {
+ opp-peak-kBps = <12748800>;
+ };
+
+ opp-8 {
+ opp-peak-kBps = <14745600>;
+ };
+
+ opp-9 {
+ opp-peak-kBps = <16896000>;
+ };
+
+ opp-10 {
+ opp-peak-kBps = <19046400>;
+ };
+ };
+ };
+
+ /* cluster1 */
+ pmu@240b7400 {
+ compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0x0 0x240b7400 0x0 0x600>;
+
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+ };
+
gem_noc: interconnect@24100000 {
compatible = "qcom,sm8750-gem-noc";
reg = <0x0 0x24100000 0x0 0x14b080>;
diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
index c771fd1..ee3c8c5 100644
--- a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
@@ -985,7 +985,6 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -994,13 +993,15 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -1019,19 +1020,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index c9f0d50..3c9455f 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -1016,6 +1016,27 @@ retimer_ss0_con_sbu_out: endpoint {
};
};
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ eusb6_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb6_reset_n>;
+ pinctrl-names = "default";
+
+ #phy-cells = <0>;
+ };
+};
+
&i2c7 {
clock-frequency = <400000>;
@@ -1128,7 +1149,7 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp1 {
@@ -1136,7 +1157,7 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp2 {
@@ -1144,12 +1165,15 @@ &mdss_dp2 {
};
&mdss_dp2_out {
- data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -1168,18 +1192,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
@@ -1466,6 +1485,14 @@ edp_reg_en: edp-reg-en-state {
bias-disable;
};
+ eusb6_reset_n: eusb6-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
hall_int_n_default: hall-int-n-state {
pins = "gpio92";
function = "gpio";
@@ -1747,3 +1774,38 @@ &usb_1_ss2_dwc3_hs {
&usb_1_ss2_qmpphy_out {
remote-endpoint = <&retimer_ss2_ss_in>;
};
+
+&usb_mp {
+ /* Only second port is used with USB 2.0 maximum speed */
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb6_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
new file mode 100644
index 0000000..cc64558e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
@@ -0,0 +1,1666 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ * Copyright (c) 2025 Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+ chassis-type = "laptop";
+
+ aliases {
+ serial0 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <40000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Display-adjacent port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss0_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
+ };
+ };
+ };
+ };
+
+ /* User-adjacent port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss1_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss1_con_sbu_out>;
+ };
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&cam_indicator_en>;
+ pinctrl-names = "default";
+
+ led-camera-indicator {
+ label = "white:camera-indicator";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ /* Reuse as a panic indicator until we get a "camera on" trigger */
+ panic-indicator;
+ };
+ };
+
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ sound: sound {
+ compatible = "qcom,x1e80100-sndcard";
+ audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+ "TweeterLeft IN", "WSA WSA_SPK2 OUT",
+ "WooferRight IN", "WSA2 WSA_SPK1 OUT",
+ "TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC0", "VA MIC BIAS1",
+ "VA DMIC1", "VA MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_woofer>, <&left_tweeter>,
+ <&swr0 0>, <&lpass_wsamacro 0>,
+ <&right_woofer>, <&right_tweeter>,
+ <&swr3 0>, <&lpass_wsa2macro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ vreg_cam_1p8: regulator-cam-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_CAM_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&cam_ldo_en>;
+ pinctrl-names = "default";
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ keyboard@5 {
+ compatible = "hid-over-i2c";
+ reg = <0x5>;
+
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&kybd_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&tpad_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8833", "parade,ps8830";
+ reg = <0x8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+ vdd-supply = <&vreg_rtmr0_1p15>;
+ vdd33-supply = <&vreg_rtmr0_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+ vddar-supply = <&vreg_rtmr0_1p15>;
+ vddat-supply = <&vreg_rtmr0_1p15>;
+ vddio-supply = <&vreg_rtmr0_1p8>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr0_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss0_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss0_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* EC @0x3b */
+
+ /* Type A Port */
+ eusb3_typea_repeater: redriver@43 {
+ compatible = "nxp,ptn3222";
+ reg = <0x43>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb3_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ /* Fingerprint scanner */
+ eusb5_frp_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb5_reset_n>;
+ pinctrl-names = "default";
+ };
+};
+
+&i2c7 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8833", "parade,ps8830";
+ reg = <0x8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+ vdd-supply = <&vreg_rtmr1_1p15>;
+ vdd33-supply = <&vreg_rtmr1_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+ vddar-supply = <&vreg_rtmr1_1p15>;
+ vddat-supply = <&vreg_rtmr1_1p15>;
+ vddio-supply = <&vreg_rtmr1_1p8>;
+
+ reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr1_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss1_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss1_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&i2c20 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+};
+
+&lpass_tlmm {
+ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_3p3>;
+
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_gpios {
+ rtmr0_default: rtmr0-reset-n-active-state {
+ pins = "gpio10";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+
+ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+ pins = "gpio11";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pm8550ve_9_gpios {
+ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pmc8380_5_gpios {
+ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l6b_1p8>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+
+ status = "okay";
+};
+
+&smb2360_0 {
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+ status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Left Woofer */
+ left_woofer: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "WooferLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Left Tweeter */
+ left_tweeter: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TweeterLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9385 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9385 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&swr3 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Right Woofer */
+ right_woofer: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "WooferRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Right Tweeter */
+ right_tweeter: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TweeterRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */
+ <76 4>, /* SPI19 (TZ Protected) */
+ <238 1>; /* UFS Reset */
+
+ cam_rgb_default: cam-rgb-default-state {
+ mclk-pins {
+ pins = "gpio100";
+ function = "cam_aon";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio237";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ cam_indicator_en: cam-indicator-en-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_ldo_en: cam-ldo-en-state {
+ pins = "gpio91";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio74";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ eusb3_reset_n: eusb3-reset-n-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb5_reset_n: eusb5-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+
+ bias-disable;
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ rtmr1_default: rtmr1-reset-n-active-state {
+ pins = "gpio176";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_card_det_n: sdc2-card-det-state {
+ pins = "gpio71";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tpad_default: tpad-default-state {
+ disable-pins {
+ pins = "gpio38";
+ function = "gpio";
+ output-high;
+ };
+
+ int-n-pins {
+ pins = "gpio3";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ reset-n-pins {
+ pins = "gpio52";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ ts0_default: ts0-default-state {
+ disable-pins {
+ pins = "gpio75";
+ function = "gpio";
+ output-high;
+ };
+
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ reset-n-pins {
+ /* Technically should be High-Z input */
+ pins = "gpio48";
+ function = "gpio";
+ output-low;
+ drive-strength = <2>;
+ };
+ };
+
+ usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+ pins = "gpio188";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+ pins = "gpio186";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb5_frp_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb3_typea_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-el2.dtso b/arch/arm64/boot/dts/qcom/x1-el2.dtso
index 380441d..2d1c915 100644
--- a/arch/arm64/boot/dts/qcom/x1-el2.dtso
+++ b/arch/arm64/boot/dts/qcom/x1-el2.dtso
@@ -12,6 +12,11 @@ &gpu_zap_shader {
status = "disabled";
};
+&iris {
+ /* TODO: Add video-firmware iommus to start IRIS from EL2 */
+ status = "disabled";
+};
+
/*
* When running under Gunyah, this IOMMU is controlled by the firmware,
* however when we take ownership of it in EL2, we need to configure
diff --git a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
new file mode 100644
index 0000000..a407543
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
@@ -0,0 +1,1544 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcd_default>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pmk8550_pwm 0 5000000>;
+
+ brightness-levels = <0 2048 4096 8192 16384 65535>;
+ num-interpolated-steps = <20>;
+ default-brightness-level = <80>;
+
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_bl>;
+
+ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+ pinctrl-names = "default";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Left-side port, closer to the screen */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss0_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
+ };
+ };
+ };
+ };
+
+ /* Left-side port, farther from the screen */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss1_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ sound: sound {
+ compatible = "qcom,x1e80100-sndcard";
+ model = "X1E80100-HP-OMNIBOOK-X14";
+ audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "VA DMIC0", "VA MIC BIAS3",
+ "VA DMIC1", "VA MIC BIAS3",
+ "VA DMIC2", "VA MIC BIAS1",
+ "VA DMIC3", "VA MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_edp_bl: regulator-edp-bl {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VBL9";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_reg_en>;
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_MISC_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&misc_3p3_reg_en>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg_vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ /*
+ * TODO: These two regulators are actually part of the removable M.2
+ * card and not the CRD mainboard. Need to describe this differently.
+ * Functionally it works correctly, because all we need to do is to
+ * turn on the actual 3.3V supply above.
+ */
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_wcn_1p9>;
+ vddpcie1p3-supply = <&vreg_wcn_1p9>;
+ vddpcie1p9-supply = <&vreg_wcn_1p9>;
+ vddpmu-supply = <&vreg_wcn_0p95>;
+ vddpmumx-supply = <&vreg_wcn_0p95>;
+ vddpmucx-supply = <&vreg_wcn_0p95>;
+ vddrfa0p95-supply = <&vreg_wcn_0p95>;
+ vddrfa1p3-supply = <&vreg_wcn_1p9>;
+ vddrfa1p9-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn_0p8: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn_0p8";
+ };
+
+ vreg_pmu_aon_0p8: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p8";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p8: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p8";
+ };
+
+ vreg_pmu_btcmx_0p8: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p8";
+ };
+
+ vreg_pmu_pcie_1p8: ldo5 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo6 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_rfa_0p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo8 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo9 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+ };
+ };
+
+ usb-1-ss1-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss1_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_sbu>;
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vreg_vph_pwr>;
+ vdd-bob2-supply = <&vreg_vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vreg_vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vreg_vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vreg_vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vreg_vph_pwr>;
+ vdd-s2-supply = <&vreg_vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vreg_vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ pinctrl-0 = <&kybd_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ pinctrl-0 = <&tpad_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+ vdd-supply = <&vreg_rtmr0_1p15>;
+ vdd33-supply = <&vreg_rtmr0_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+ vddar-supply = <&vreg_rtmr0_1p15>;
+ vddat-supply = <&vreg_rtmr0_1p15>;
+ vddio-supply = <&vreg_rtmr0_1p8>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr0_default>;
+ pinctrl-names = "default";
+
+ orientation-switch;
+ retimer-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss0_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss0_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ eusb3_repeater: redriver@47 {
+ compatible = "nxp,ptn3222";
+ reg = <0x47>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb3_reset_n>;
+ pinctrl-names = "default";
+
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l15b_1p8>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&lpass_tlmm {
+ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&vreg_edp_3p3>;
+
+ backlight = <&backlight>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ };
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_gpios {
+ rtmr0_default: rtmr0-reset-n-active-state {
+ pins = "gpio10";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+
+ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+ pins = "gpio11";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pm8550ve_8_gpios {
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ drive-push-pull;
+ input-disable;
+ output-enable;
+ power-source = <1>; /* 1.8 V */
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
+&pm8550ve_9_gpios {
+ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ input-disable;
+ output-enable;
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio10";
+ function = "normal";
+ };
+
+};
+
+&pmc8380_5_gpios {
+ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pmk8550_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio5";
+ function = "func3";
+ };
+};
+
+&pmk8550_pwm {
+ status = "okay";
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&smb2360_0 {
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+ status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* WSA8845, Left Speaker */
+ left_spkr: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Right Speaker */
+ right_spkr: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9385 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9385 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* Unused */
+ <44 4>, /* SPI (TPM) */
+ <72 2>, /* Secure EC I2C connection (?) */
+ <238 1>; /* UFS Reset */
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ eusb3_reset_n: eusb3-reset-n-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ tpad_default: tpad-default-state {
+ pins = "gpio3";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
+
+ usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+ mode-pins {
+ pins = "gpio177";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ output-high;
+ };
+
+ oe-n-pins {
+ pins = "gpio179";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio178";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn6855-bt";
+ max-speed = <3200000>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_dwc3 {
+ phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
+ phy-names = "usb2-0", "usb3-0";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb3_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index 2d9627e..bfc649d 100644
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -983,7 +983,6 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -992,7 +991,6 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -1001,7 +999,6 @@ &mdss_dp2 {
};
&mdss_dp2_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -1474,7 +1471,7 @@ &usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb6_repeater>;
+ phys = <&eusb3_repeater>;
status = "okay";
};
@@ -1483,7 +1480,7 @@ &usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb3_repeater>;
+ phys = <&eusb6_repeater>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
index be65faf..d524afa 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
@@ -10,3 +10,11 @@ / {
compatible = "lenovo,thinkpad-t14s-oled", "lenovo,thinkpad-t14s",
"qcom,x1e78100", "qcom,x1e80100";
};
+
+&panel {
+ compatible = "samsung,atna40yk20", "samsung,atna33xc20";
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index ac1dddf..0a989e9 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -967,6 +967,11 @@ touchscreen@10 {
/* TODO: second-sourced touchscreen @ 0x41 */
};
+&iris {
+ firmware-name = "qcom/x1e80100/LENOVO/21N1/qcvss8380.mbn";
+ status = "okay";
+};
+
&lpass_tlmm {
spkr_01_sd_n_active: spkr-01-sd-n-active-state {
pins = "gpio12";
@@ -994,7 +999,7 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp1 {
@@ -1002,12 +1007,15 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -1022,19 +1030,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
@@ -1547,7 +1549,7 @@ &usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb6_repeater>;
+ phys = <&eusb3_repeater>;
status = "okay";
};
@@ -1556,7 +1558,7 @@ &usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb3_repeater>;
+ phys = <&eusb6_repeater>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 71b2cc6..0113d85 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -593,6 +593,9 @@ &mdss {
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -611,19 +614,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
@@ -977,7 +974,7 @@ &usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb6_repeater>;
+ phys = <&eusb3_repeater>;
status = "okay";
};
@@ -986,7 +983,7 @@ &usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb3_repeater>;
+ phys = <&eusb6_repeater>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 976b8e4..dfc378e 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -16,3 +16,7 @@ / {
&gpu_zap_shader {
firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
};
+
+&iris {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
new file mode 100644
index 0000000..cf2a7c26
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+ model = "Dell Inspiron 14 Plus 7441";
+ compatible = "dell,inspiron-14-plus-7441", "qcom,x1e80100";
+};
+
+&sound {
+ model = "X1E80100-Dell-Inspiron-14p-7441";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&iris {
+ firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcvss8380.mbn";
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcadsp8380.mbn",
+ "qcom/x1e80100/dell/inspiron-14-plus-7441/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qccdsp8380.mbn",
+ "qcom/x1e80100/dell/inspiron-14-plus-7441/cdsp_dtbs.elf";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
new file mode 100644
index 0000000..32ad967
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+ model = "Dell Latitude 7455";
+ compatible = "dell,latitude-7455", "qcom,x1e80100";
+};
+
+&sound {
+ model = "X1E80100-Dell-Latitude-7455";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1e80100/dell/latitude-7455/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+ /* LXST2021 */
+ touchscreen@9 {
+ compatible = "hid-over-i2c";
+ reg = <0x09>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&iris {
+ firmware-name = "qcom/x1e80100/dell/latitude-7455/qcvss8380.mbn";
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/dell/latitude-7455/qcadsp8380.mbn",
+ "qcom/x1e80100/dell/latitude-7455/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/dell/latitude-7455/qccdsp8380.mbn",
+ "qcom/x1e80100/dell/latitude-7455/cdsp_dtbs.elf";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
index fd00d1b..58f8caa 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -875,6 +875,11 @@ touchpad@2c {
};
};
+&iris {
+ firmware-name = "qcom/x1e80100/dell/xps13-9345/qcvss8380.mbn";
+ status = "okay";
+};
+
&mdss {
status = "okay";
};
@@ -884,7 +889,6 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -893,13 +897,15 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -918,19 +924,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 8d2a9b7..e5a839d 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -6,1227 +6,18 @@
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
#include "x1e80100.dtsi"
#include "x1e80100-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
/ {
- model = "HP Omnibook X 14";
+ model = "HP Omnibook X 14-fe0";
compatible = "hp,omnibook-x14", "qcom,x1e80100";
chassis-type = "laptop";
-
- aliases {
- serial0 = &uart21;
- serial1 = &uart14;
- };
-
- wcd938x: audio-codec {
- compatible = "qcom,wcd9385-codec";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wcd_default>;
-
- qcom,micbias1-microvolt = <1800000>;
- qcom,micbias2-microvolt = <1800000>;
- qcom,micbias3-microvolt = <1800000>;
- qcom,micbias4-microvolt = <1800000>;
- qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
- qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
- qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
- qcom,rx-device = <&wcd_rx>;
- qcom,tx-device = <&wcd_tx>;
-
- reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
-
- vdd-buck-supply = <&vreg_l15b_1p8>;
- vdd-rxtx-supply = <&vreg_l15b_1p8>;
- vdd-io-supply = <&vreg_l15b_1p8>;
- vdd-mic-bias-supply = <&vreg_bob1>;
-
- #sound-dai-cells = <1>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pmk8550_pwm 0 5000000>;
-
- brightness-levels = <0 2048 4096 8192 16384 65535>;
- num-interpolated-steps = <20>;
- default-brightness-level = <80>;
-
- enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
- power-supply = <&vreg_edp_bl>;
-
- pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
- pinctrl-names = "default";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&hall_int_n_default>;
- pinctrl-names = "default";
-
- switch-lid {
- gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_SW>;
- linux,code = <SW_LID>;
- wakeup-source;
- wakeup-event-action = <EV_ACT_DEASSERTED>;
- };
- };
-
- pmic-glink {
- compatible = "qcom,x1e80100-pmic-glink",
- "qcom,sm8550-pmic-glink",
- "qcom,pmic-glink";
- orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
- <&tlmm 123 GPIO_ACTIVE_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Left-side port, closer to the screen */
- connector@0 {
- compatible = "usb-c-connector";
- reg = <0>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_ss0_hs_in: endpoint {
- remote-endpoint = <&usb_1_ss0_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss0_ss_in: endpoint {
- remote-endpoint = <&retimer_ss0_ss_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- pmic_glink_ss0_con_sbu_in: endpoint {
- remote-endpoint = <&retimer_ss0_con_sbu_out>;
- };
- };
- };
- };
-
- /* Left-side port, farther from the screen */
- connector@1 {
- compatible = "usb-c-connector";
- reg = <1>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_ss1_hs_in: endpoint {
- remote-endpoint = <&usb_1_ss1_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss1_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- pmic_glink_ss1_sbu: endpoint {
- remote-endpoint = <&usb_1_ss1_sbu_mux>;
- };
- };
- };
- };
- };
-
- reserved-memory {
- linux,cma {
- compatible = "shared-dma-pool";
- size = <0x0 0x8000000>;
- reusable;
- linux,cma-default;
- };
- };
-
- sound: sound {
- compatible = "qcom,x1e80100-sndcard";
- model = "X1E80100-HP-OMNIBOOK-X14";
- audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
- "SpkrRight IN", "WSA WSA_SPK2 OUT",
- "IN1_HPHL", "HPHL_OUT",
- "IN2_HPHR", "HPHR_OUT",
- "AMIC2", "MIC BIAS2",
- "VA DMIC0", "MIC BIAS3",
- "VA DMIC1", "MIC BIAS3",
- "VA DMIC2", "MIC BIAS1",
- "VA DMIC3", "MIC BIAS1",
- "VA DMIC0", "VA MIC BIAS3",
- "VA DMIC1", "VA MIC BIAS3",
- "VA DMIC2", "VA MIC BIAS1",
- "VA DMIC3", "VA MIC BIAS1",
- "TX SWR_INPUT1", "ADC2_OUTPUT";
-
- wcd-playback-dai-link {
- link-name = "WCD Playback";
-
- cpu {
- sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
- };
-
- codec {
- sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
-
- wcd-capture-dai-link {
- link-name = "WCD Capture";
-
- cpu {
- sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
- };
-
- codec {
- sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
-
- wsa-dai-link {
- link-name = "WSA Playback";
-
- cpu {
- sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
- };
-
- codec {
- sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
-
- va-dai-link {
- link-name = "VA Capture";
-
- cpu {
- sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
- };
-
- codec {
- sound-dai = <&lpass_vamacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
- };
-
- vreg_edp_3p3: regulator-edp-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_EDP_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&edp_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_edp_bl: regulator-edp-bl {
- compatible = "regulator-fixed";
-
- regulator-name = "VBL9";
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&edp_bl_reg_en>;
-
- regulator-boot-on;
- };
-
- vreg_misc_3p3: regulator-misc-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_MISC_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&misc_3p3_reg_en>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vreg_nvme: regulator-nvme {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_NVME_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&nvme_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR0_1P15";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
-
- gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR0_1P8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb0_1p8_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR0_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb0_3p3_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_vph_pwr: regulator-vph-pwr {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg_vph_pwr";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- vreg_wcn_3p3: regulator-wcn-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_WCN_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&wcn_sw_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- /*
- * TODO: These two regulators are actually part of the removable M.2
- * card and not the CRD mainboard. Need to describe this differently.
- * Functionally it works correctly, because all we need to do is to
- * turn on the actual 3.3V supply above.
- */
- vreg_wcn_0p95: regulator-wcn-0p95 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_WCN_0P95";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <950000>;
-
- vin-supply = <&vreg_wcn_3p3>;
- };
-
- vreg_wcn_1p9: regulator-wcn-1p9 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_WCN_1P9";
- regulator-min-microvolt = <1900000>;
- regulator-max-microvolt = <1900000>;
-
- vin-supply = <&vreg_wcn_3p3>;
- };
-
- wcn6855-pmu {
- compatible = "qcom,wcn6855-pmu";
-
- vddaon-supply = <&vreg_wcn_0p95>;
- vddio-supply = <&vreg_wcn_1p9>;
- vddpcie1p3-supply = <&vreg_wcn_1p9>;
- vddpcie1p9-supply = <&vreg_wcn_1p9>;
- vddpmu-supply = <&vreg_wcn_0p95>;
- vddpmumx-supply = <&vreg_wcn_0p95>;
- vddpmucx-supply = <&vreg_wcn_0p95>;
- vddrfa0p95-supply = <&vreg_wcn_0p95>;
- vddrfa1p3-supply = <&vreg_wcn_1p9>;
- vddrfa1p9-supply = <&vreg_wcn_1p9>;
-
- wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
- bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&wcn_wlan_bt_en>;
- pinctrl-names = "default";
-
- regulators {
- vreg_pmu_rfa_cmn_0p8: ldo0 {
- regulator-name = "vreg_pmu_rfa_cmn_0p8";
- };
-
- vreg_pmu_aon_0p8: ldo1 {
- regulator-name = "vreg_pmu_aon_0p8";
- };
-
- vreg_pmu_wlcx_0p8: ldo2 {
- regulator-name = "vreg_pmu_wlcx_0p8";
- };
-
- vreg_pmu_wlmx_0p8: ldo3 {
- regulator-name = "vreg_pmu_wlmx_0p8";
- };
-
- vreg_pmu_btcmx_0p8: ldo4 {
- regulator-name = "vreg_pmu_btcmx_0p8";
- };
-
- vreg_pmu_pcie_1p8: ldo5 {
- regulator-name = "vreg_pmu_pcie_1p8";
- };
-
- vreg_pmu_pcie_0p9: ldo6 {
- regulator-name = "vreg_pmu_pcie_0p9";
- };
-
- vreg_pmu_rfa_0p8: ldo7 {
- regulator-name = "vreg_pmu_rfa_0p8";
- };
-
- vreg_pmu_rfa_1p2: ldo8 {
- regulator-name = "vreg_pmu_rfa_1p2";
- };
-
- vreg_pmu_rfa_1p7: ldo9 {
- regulator-name = "vreg_pmu_rfa_1p7";
- };
- };
- };
-
- usb-1-ss1-sbu-mux {
- compatible = "onnn,fsusb42", "gpio-sbu-mux";
-
- enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
- select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&usb_1_ss1_sbu_default>;
- pinctrl-names = "default";
-
- mode-switch;
- orientation-switch;
-
- port {
- usb_1_ss1_sbu_mux: endpoint {
- remote-endpoint = <&pmic_glink_ss1_sbu>;
- };
- };
- };
};
-&apps_rsc {
- regulators-0 {
- compatible = "qcom,pm8550-rpmh-regulators";
- qcom,pmic-id = "b";
-
- vdd-bob1-supply = <&vreg_vph_pwr>;
- vdd-bob2-supply = <&vreg_vph_pwr>;
- vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
- vdd-l2-l13-l14-supply = <&vreg_bob1>;
- vdd-l5-l16-supply = <&vreg_bob1>;
- vdd-l6-l7-supply = <&vreg_bob2>;
- vdd-l8-l9-supply = <&vreg_bob1>;
- vdd-l12-supply = <&vreg_s5j_1p2>;
- vdd-l15-supply = <&vreg_s4c_1p8>;
- vdd-l17-supply = <&vreg_bob2>;
-
- vreg_bob1: bob1 {
- regulator-name = "vreg_bob1";
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_bob2: bob2 {
- regulator-name = "vreg_bob2";
- regulator-min-microvolt = <2504000>;
- regulator-max-microvolt = <3008000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1b_1p8: ldo1 {
- regulator-name = "vreg_l1b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2b_3p0: ldo2 {
- regulator-name = "vreg_l2b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l4b_1p8: ldo4 {
- regulator-name = "vreg_l4b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l5b_3p0: ldo5 {
- regulator-name = "vreg_l5b_3p0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l6b_1p8: ldo6 {
- regulator-name = "vreg_l6b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7b_2p8: ldo7 {
- regulator-name = "vreg_l7b_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l8b_3p0: ldo8 {
- regulator-name = "vreg_l8b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l9b_2p9: ldo9 {
- regulator-name = "vreg_l9b_2p9";
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l10b_1p8: ldo10 {
- regulator-name = "vreg_l10b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l12b_1p2: ldo12 {
- regulator-name = "vreg_l12b_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-always-on;
- };
-
- vreg_l13b_3p0: ldo13 {
- regulator-name = "vreg_l13b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l14b_3p0: ldo14 {
- regulator-name = "vreg_l14b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l15b_1p8: ldo15 {
- regulator-name = "vreg_l15b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-always-on;
- };
-
- vreg_l16b_2p9: ldo16 {
- regulator-name = "vreg_l16b_2p9";
- regulator-min-microvolt = <2912000>;
- regulator-max-microvolt = <2912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l17b_2p5: ldo17 {
- regulator-name = "vreg_l17b_2p5";
- regulator-min-microvolt = <2504000>;
- regulator-max-microvolt = <2504000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vdd-l1-supply = <&vreg_s5j_1p2>;
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s4-supply = <&vreg_vph_pwr>;
-
- vreg_s4c_1p8: smps4 {
- regulator-name = "vreg_s4c_1p8";
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <2000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1c_1p2: ldo1 {
- regulator-name = "vreg_l1c_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2c_0p8: ldo2 {
- regulator-name = "vreg_l2c_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3c_0p8: ldo3 {
- regulator-name = "vreg_l3c_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-2 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "d";
-
- vdd-l1-supply = <&vreg_s1f_0p7>;
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s4c_1p8>;
- vdd-s1-supply = <&vreg_vph_pwr>;
-
- vreg_l1d_0p8: ldo1 {
- regulator-name = "vreg_l1d_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2d_0p9: ldo2 {
- regulator-name = "vreg_l2d_0p9";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3d_1p8: ldo3 {
- regulator-name = "vreg_l3d_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-3 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "e";
-
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s5j_1p2>;
-
- vreg_l2e_0p8: ldo2 {
- regulator-name = "vreg_l2e_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3e_1p2: ldo3 {
- regulator-name = "vreg_l3e_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-4 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "f";
-
- vdd-l1-supply = <&vreg_s5j_1p2>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s5j_1p2>;
- vdd-s1-supply = <&vreg_vph_pwr>;
-
- vreg_s1f_0p7: smps1 {
- regulator-name = "vreg_s1f_0p7";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1f_1p0: ldo1 {
- regulator-name = "vreg_l1f_1p0";
- regulator-min-microvolt = <1024000>;
- regulator-max-microvolt = <1024000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2f_1p0: ldo2 {
- regulator-name = "vreg_l2f_1p0";
- regulator-min-microvolt = <1024000>;
- regulator-max-microvolt = <1024000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3f_1p0: ldo3 {
- regulator-name = "vreg_l3f_1p0";
- regulator-min-microvolt = <1024000>;
- regulator-max-microvolt = <1024000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-6 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "i";
-
- vdd-l1-supply = <&vreg_s4c_1p8>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s1-supply = <&vreg_vph_pwr>;
- vdd-s2-supply = <&vreg_vph_pwr>;
-
- vreg_s1i_0p9: smps1 {
- regulator-name = "vreg_s1i_0p9";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s2i_1p0: smps2 {
- regulator-name = "vreg_s2i_1p0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1i_1p8: ldo1 {
- regulator-name = "vreg_l1i_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2i_1p2: ldo2 {
- regulator-name = "vreg_l2i_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3i_0p8: ldo3 {
- regulator-name = "vreg_l3i_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-7 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "j";
-
- vdd-l1-supply = <&vreg_s1f_0p7>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s5-supply = <&vreg_vph_pwr>;
-
- vreg_s5j_1p2: smps5 {
- regulator-name = "vreg_s5j_1p2";
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1j_0p8: ldo1 {
- regulator-name = "vreg_l1j_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2j_1p2: ldo2 {
- regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1256000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3j_0p8: ldo3 {
- regulator-name = "vreg_l3j_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-};
-
-&gpu {
- status = "okay";
-
- zap-shader {
- firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
- };
-};
-
-&i2c0 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- keyboard@3a {
- compatible = "hid-over-i2c";
- reg = <0x3a>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
- vdd-supply = <&vreg_misc_3p3>;
- vddl-supply = <&vreg_l12b_1p2>;
-
- pinctrl-0 = <&kybd_default>;
- pinctrl-names = "default";
-
- wakeup-source;
- };
-
- touchpad@15 {
- compatible = "hid-over-i2c";
- reg = <0x15>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
- vdd-supply = <&vreg_misc_3p3>;
- vddl-supply = <&vreg_l12b_1p2>;
-
- pinctrl-0 = <&tpad_default>;
- pinctrl-names = "default";
-
- wakeup-source;
- };
-};
-
-&i2c3 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- typec-mux@8 {
- compatible = "parade,ps8830";
- reg = <0x08>;
-
- clocks = <&rpmhcc RPMH_RF_CLK3>;
-
- vdd-supply = <&vreg_rtmr0_1p15>;
- vdd33-supply = <&vreg_rtmr0_3p3>;
- vdd33-cap-supply = <&vreg_rtmr0_3p3>;
- vddar-supply = <&vreg_rtmr0_1p15>;
- vddat-supply = <&vreg_rtmr0_1p15>;
- vddio-supply = <&vreg_rtmr0_1p8>;
-
- reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&rtmr0_default>;
- pinctrl-names = "default";
-
- orientation-switch;
- retimer-switch;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- retimer_ss0_ss_out: endpoint {
- remote-endpoint = <&pmic_glink_ss0_ss_in>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- retimer_ss0_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- retimer_ss0_con_sbu_out: endpoint {
- remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
- };
- };
- };
- };
-};
-
-&i2c5 {
- clock-frequency = <400000>;
- status = "okay";
-
- eusb3_repeater: redriver@47 {
- compatible = "nxp,ptn3222";
- reg = <0x47>;
- #phy-cells = <0>;
-
- vdd3v3-supply = <&vreg_l13b_3p0>;
- vdd1v8-supply = <&vreg_l4b_1p8>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&eusb3_reset_n>;
- pinctrl-names = "default";
-
- };
-};
-
-&i2c8 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
- vdd-supply = <&vreg_misc_3p3>;
- vddl-supply = <&vreg_l15b_1p8>;
-
- pinctrl-0 = <&ts0_default>;
- pinctrl-names = "default";
- };
-};
-
-&lpass_tlmm {
- spkr_01_sd_n_active: spkr-01-sd-n-active-state {
- pins = "gpio12";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
-};
-
-&lpass_vamacro {
- pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
- pinctrl-names = "default";
-
- vdd-micb-supply = <&vreg_l1b_1p8>;
- qcom,dmic-sample-rate = <4800000>;
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dp0 {
- status = "okay";
-};
-
-&mdss_dp0_out {
- data-lanes = <0 1>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp1 {
- status = "okay";
-};
-
-&mdss_dp1_out {
- data-lanes = <0 1>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp3 {
- /delete-property/ #sound-dai-cells;
-
- status = "okay";
-
- aux-bus {
- panel {
- compatible = "edp-panel";
- power-supply = <&vreg_edp_3p3>;
-
- backlight = <&backlight>;
-
- port {
- edp_panel_in: endpoint {
- remote-endpoint = <&mdss_dp3_out>;
- };
- };
- };
- };
-
- ports {
- port@1 {
- reg = <1>;
-
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
-};
-
-&mdss_dp3_phy {
- vdda-phy-supply = <&vreg_l3j_0p8>;
- vdda-pll-supply = <&vreg_l2j_1p2>;
-
- status = "okay";
-};
-
-&pcie4 {
- perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&pcie4_default>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pcie4_phy {
- vdda-phy-supply = <&vreg_l3i_0p8>;
- vdda-pll-supply = <&vreg_l3e_1p2>;
-
- status = "okay";
-};
-
-&pcie4_port0 {
- wifi@0 {
- compatible = "pci17cb,1107";
- reg = <0x10000 0x0 0x0 0x0 0x0>;
-
- vddaon-supply = <&vreg_pmu_aon_0p8>;
- vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
- vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
- vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
- vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
- vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
- vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
- vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
- vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
- };
-};
-
-&pcie6a {
- perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
- vddpe-3v3-supply = <&vreg_nvme>;
-
- pinctrl-0 = <&pcie6a_default>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pcie6a_phy {
- vdda-phy-supply = <&vreg_l1d_0p8>;
- vdda-pll-supply = <&vreg_l2j_1p2>;
-
- status = "okay";
-};
-
-&pm8550_gpios {
- rtmr0_default: rtmr0-reset-n-active-state {
- pins = "gpio10";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-
- usb0_3p3_reg_en: usb0-3p3-reg-en-state {
- pins = "gpio11";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-};
-
-&pm8550ve_8_gpios {
- misc_3p3_reg_en: misc-3p3-reg-en-state {
- pins = "gpio6";
- function = "normal";
- bias-disable;
- drive-push-pull;
- input-disable;
- output-enable;
- power-source = <1>; /* 1.8 V */
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-};
-
-&pm8550ve_9_gpios {
- usb0_1p8_reg_en: usb0-1p8-reg-en-state {
- pins = "gpio8";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-};
-
-&pmc8380_3_gpios {
- edp_bl_en: edp-bl-en-state {
- pins = "gpio4";
- function = "normal";
- power-source = <1>; /* 1.8V */
- input-disable;
- output-enable;
- };
-
- edp_bl_reg_en: edp-bl-reg-en-state {
- pins = "gpio10";
- function = "normal";
- };
-
-};
-
-&pmc8380_5_gpios {
- usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
- pins = "gpio8";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-};
-
-&pmk8550_gpios {
- edp_bl_pwm: edp-bl-pwm-state {
- pins = "gpio5";
- function = "func3";
- };
-};
-
-&pmk8550_pwm {
- status = "okay";
-};
-
-&qupv3_0 {
- status = "okay";
-};
-
-&qupv3_1 {
- status = "okay";
-};
-
-&qupv3_2 {
- status = "okay";
+&gpu_zap_shader {
+ firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
};
&remoteproc_adsp {
@@ -1242,335 +33,3 @@ &remoteproc_cdsp {
status = "okay";
};
-
-&smb2360_0 {
- status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
- vdd18-supply = <&vreg_l3d_1p8>;
- vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1 {
- status = "okay";
-};
-
-&smb2360_1_eusb2_repeater {
- vdd18-supply = <&vreg_l3d_1p8>;
- vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&swr0 {
- pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
- pinctrl-names = "default";
-
- status = "okay";
-
- /* WSA8845, Left Speaker */
- left_spkr: speaker@0,0 {
- compatible = "sdw20217020400";
- reg = <0 0>;
- reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SpkrLeft";
- vdd-1p8-supply = <&vreg_l15b_1p8>;
- vdd-io-supply = <&vreg_l12b_1p2>;
- qcom,port-mapping = <1 2 3 7 10 13>;
- };
-
- /* WSA8845, Right Speaker */
- right_spkr: speaker@0,1 {
- compatible = "sdw20217020400";
- reg = <0 1>;
- reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SpkrRight";
- vdd-1p8-supply = <&vreg_l15b_1p8>;
- vdd-io-supply = <&vreg_l12b_1p2>;
- qcom,port-mapping = <4 5 6 7 11 13>;
- };
-};
-
-&swr1 {
- status = "okay";
-
- /* WCD9385 RX */
- wcd_rx: codec@0,4 {
- compatible = "sdw20217010d00";
- reg = <0 4>;
- qcom,rx-port-mapping = <1 2 3 4 5>;
- };
-};
-
-&swr2 {
- status = "okay";
-
- /* WCD9385 TX */
- wcd_tx: codec@0,3 {
- compatible = "sdw20217010d00";
- reg = <0 3>;
- qcom,tx-port-mapping = <2 2 3 4>;
- };
-};
-
-&tlmm {
- gpio-reserved-ranges = <34 2>, /* Unused */
- <44 4>, /* SPI (TPM) */
- <72 2>, /* Secure EC I2C connection (?) */
- <238 1>; /* UFS Reset */
-
- edp_reg_en: edp-reg-en-state {
- pins = "gpio70";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- eusb3_reset_n: eusb3-reset-n-state {
- pins = "gpio6";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- hall_int_n_default: hall-int-n-state {
- pins = "gpio92";
- function = "gpio";
- bias-disable;
- };
-
- kybd_default: kybd-default-state {
- pins = "gpio67";
- function = "gpio";
- bias-pull-up;
- };
-
- nvme_reg_en: nvme-reg-en-state {
- pins = "gpio18";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- pcie4_default: pcie4-default-state {
- clkreq-n-pins {
- pins = "gpio147";
- function = "pcie4_clk";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- perst-n-pins {
- pins = "gpio146";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-n-pins {
- pins = "gpio148";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie6a_default: pcie6a-default-state {
- clkreq-n-pins {
- pins = "gpio153";
- function = "pcie6a_clk";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- perst-n-pins {
- pins = "gpio152";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-n-pins {
- pins = "gpio154";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- tpad_default: tpad-default-state {
- pins = "gpio3";
- function = "gpio";
- bias-pull-up;
- };
-
- ts0_default: ts0-default-state {
- int-n-pins {
- pins = "gpio51";
- function = "gpio";
- bias-pull-up;
- };
-
- reset-n-pins {
- pins = "gpio48";
- function = "gpio";
- output-high;
- drive-strength = <16>;
- };
- };
-
- usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
- mode-pins {
- pins = "gpio177";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- output-high;
- };
-
- oe-n-pins {
- pins = "gpio179";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- };
-
- sel-pins {
- pins = "gpio178";
- function = "gpio";
- bias-disable;
- drive-strength = <2>;
- };
- };
-
- wcd_default: wcd-reset-n-active-state {
- pins = "gpio191";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
-
- wcn_sw_en: wcn-sw-en-state {
- pins = "gpio214";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wcn_wlan_bt_en: wcn-wlan-bt-en-state {
- pins = "gpio116", "gpio117";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-};
-
-&uart14 {
- status = "okay";
-
- bluetooth {
- compatible = "qcom,wcn6855-bt";
- max-speed = <3200000>;
-
- vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
- vddaon-supply = <&vreg_pmu_aon_0p8>;
- vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
- vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
- vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
- vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
- vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
- vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
- };
-};
-
-&usb_1_ss0_hsphy {
- vdd-supply = <&vreg_l3j_0p8>;
- vdda12-supply = <&vreg_l2j_1p2>;
-
- phys = <&smb2360_0_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
- vdda-phy-supply = <&vreg_l3e_1p2>;
- vdda-pll-supply = <&vreg_l1j_0p8>;
-
- status = "okay";
-};
-
-&usb_1_ss0 {
- status = "okay";
-};
-
-&usb_1_ss0_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_ss0_dwc3_hs {
- remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
- remote-endpoint = <&retimer_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
- vdd-supply = <&vreg_l3j_0p8>;
- vdda12-supply = <&vreg_l2j_1p2>;
-
- phys = <&smb2360_1_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
- vdda-phy-supply = <&vreg_l3e_1p2>;
- vdda-pll-supply = <&vreg_l2d_0p9>;
-
- status = "okay";
-};
-
-&usb_1_ss1 {
- status = "okay";
-};
-
-&usb_1_ss1_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_ss1_dwc3_hs {
- remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
-
-&usb_mp {
- status = "okay";
-};
-
-&usb_mp_dwc3 {
- phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
- phy-names = "usb2-0", "usb3-0";
-};
-
-&usb_mp_hsphy0 {
- vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
-
- phys = <&eusb3_repeater>;
-
- status = "okay";
-};
-
-&usb_mp_qmpphy0 {
- vdda-phy-supply = <&vreg_l3e_1p2>;
- vdda-pll-supply = <&vreg_l3c_0p8>;
-
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index dad0f11..e0642fe8 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -18,6 +18,7 @@ / {
aliases {
serial0 = &uart21;
+ serial1 = &uart14;
};
chosen {
@@ -404,6 +405,107 @@ vph_pwr: regulator-vph-pwr {
regulator-always-on;
regulator-boot-on;
};
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ /*
+ * TODO: These two regulators are actually part of the removable M.2
+ * card and not the CRD mainboard. Need to describe this differently.
+ * Functionally it works correctly, because all we need to do is to
+ * turn on the actual 3.3V supply above.
+ */
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
@@ -924,6 +1026,11 @@ touchscreen@14 {
};
};
+&iris {
+ firmware-name = "qcom/x1e80100/LENOVO/83ED/qcvss8380.mbn";
+ status = "okay";
+};
+
&lpass_tlmm {
spkr_01_sd_n_active: spkr-01-sd-n-active-state {
pins = "gpio12";
@@ -959,7 +1066,6 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -968,7 +1074,6 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -977,13 +1082,15 @@ &mdss_dp2 {
};
&mdss_dp2_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -1002,19 +1109,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
@@ -1045,6 +1146,16 @@ &pcie4_port0 {
wifi@0 {
compatible = "pci17cb,1107";
reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
};
};
@@ -1403,6 +1514,37 @@ usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
drive-strength = <2>;
bias-disable;
};
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
};
&uart21 {
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 0fd8516..ed468b9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -331,6 +331,42 @@ vph_pwr: regulator-vph-pwr {
regulator-boot-on;
};
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
sound {
compatible = "qcom,x1e80100-sndcard";
model = "X1E80100-Romulus";
@@ -410,6 +446,65 @@ platform {
};
};
};
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
@@ -949,7 +1044,6 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -958,13 +1052,15 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -981,19 +1077,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
@@ -1033,6 +1123,23 @@ &pcie4_phy {
status = "okay";
};
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
&pcie6a {
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -1239,6 +1346,13 @@ ssam_state: ssam-state-state {
bias-disable;
};
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
pcie3_default: pcie3-default-state {
perst-n-pins {
pins = "gpio143";
@@ -1314,6 +1428,13 @@ wcd_default: wcd-reset-n-active-state {
output-low;
};
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
cam_indicator_en: cam-indicator-en-state {
pins = "gpio225";
function = "gpio";
@@ -1337,6 +1458,23 @@ embedded-controller {
};
};
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
+};
+
&usb_1_ss0_hsphy {
vdd-supply = <&vreg_l3j>;
vdda12-supply = <&vreg_l2j>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
index e3888bc..621890a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -475,6 +475,8 @@ pm8010: pmic@c {
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
+
pm8010_temp_alarm: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 4dfba83..4a9b6d7 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -318,6 +318,48 @@ vreg_wcn_3p3: regulator-wcn-3p3 {
regulator-boot-on;
};
+ vreg_pcie_12v: regulator-pcie-12v {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_PCIE_12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+
+ gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&pcie_x8_12v>;
+ pinctrl-names = "default";
+ };
+
+ vreg_pcie_3v3_aux: regulator-pcie-3v3-aux {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_PCIE_3P3_AUX";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&pm_sde7_aux_3p3_en>;
+ pinctrl-names = "default";
+ };
+
+ vreg_pcie_3v3: regulator-pcie-3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_PCIE_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&pm_sde7_main_3p3_en>;
+ pinctrl-names = "default";
+};
+
usb-1-ss0-sbu-mux {
compatible = "onnn,fsusb42", "gpio-sbu-mux";
@@ -848,7 +890,6 @@ &mdss_dp0 {
};
&mdss_dp0_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -857,7 +898,6 @@ &mdss_dp1 {
};
&mdss_dp1_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
@@ -866,13 +906,15 @@ &mdss_dp2 {
};
&mdss_dp2_out {
- data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
@@ -887,18 +929,13 @@ edp_panel_in: endpoint {
};
};
};
+};
- ports {
- port@1 {
- reg = <1>;
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
+ remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
@@ -908,6 +945,59 @@ &mdss_dp3_phy {
status = "okay";
};
+&pm8550ve_8_gpios {
+ pcie_x8_12v: pcie-12v-default-state {
+ pins = "gpio8";
+ function = "normal";
+ output-enable;
+ output-high;
+ bias-pull-down;
+ power-source = <0>;
+ };
+};
+
+&pmc8380_3_gpios {
+ pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
+ pins = "gpio8";
+ function = "normal";
+ output-enable;
+ output-high;
+ bias-pull-down;
+ power-source = <0>;
+ };
+
+ pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
+ pins = "gpio6";
+ function = "normal";
+ output-enable;
+ output-high;
+ bias-pull-down;
+ power-source = <0>;
+ };
+};
+
+&pcie3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3_default>;
+ perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&pcie3_phy {
+ vdda-phy-supply = <&vreg_l3c_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie3_port {
+ vpcie12v-supply = <&vreg_pcie_12v>;
+ vpcie3v3-supply = <&vreg_pcie_3v3>;
+ vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;
+};
+
&pcie4 {
perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
@@ -1119,6 +1209,29 @@ nvme_reg_en: nvme-reg-en-state {
bias-disable;
};
+ pcie3_default: pcie3-default-state {
+ clkreq-n-pins {
+ pins = "gpio144";
+ function = "pcie3_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio143";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-n-pins {
+ pins = "gpio145";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
pcie4_default: pcie4-default-state {
clkreq-n-pins {
pins = "gpio147";
@@ -1394,7 +1507,7 @@ &usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb6_repeater>;
+ phys = <&eusb3_repeater>;
status = "okay";
};
@@ -1403,7 +1516,7 @@ &usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
- phys = <&eusb3_repeater>;
+ phys = <&eusb6_repeater>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index a9a7bb6..51576d9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
#include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
@@ -2856,6 +2857,7 @@ usb_1_ss0_qmpphy: phy@fd5000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ mode-switch;
orientation-switch;
status = "disabled";
@@ -2926,6 +2928,7 @@ usb_1_ss1_qmpphy: phy@fda000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ mode-switch;
orientation-switch;
status = "disabled";
@@ -2996,6 +2999,7 @@ usb_1_ss2_qmpphy: phy@fdf000 {
#clock-cells = <1>;
#phy-cells = <1>;
+ mode-switch;
orientation-switch;
status = "disabled";
@@ -3306,6 +3310,17 @@ opp-128000000 {
opp-peak-kBps = <15753000 1>;
};
};
+
+ pcie3_port: pcie@0 {
+ device_type = "pci";
+ compatible = "pciclass,0604";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie3_phy: phy@1be0000 {
@@ -3392,10 +3407,10 @@ pcie6a: pci@1bf8000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
<&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
@@ -3524,10 +3539,10 @@ pcie5: pci@1c00000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 0 71 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 0 72 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
<&gcc GCC_PCIE_5_CFG_AHB_CLK>,
@@ -3654,10 +3669,10 @@ pcie4: pci@1c08000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
<&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -3779,6 +3794,9 @@ gpu: gpu@3d00000 {
qcom,gmu = <&gmu>;
#cooling-cells = <2>;
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
@@ -3791,11 +3809,28 @@ gpu_zap_shader: zap-shader {
gpu_opp_table: opp-table {
compatible = "operating-points-v2-adreno", "operating-points-v2";
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L5>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x03>;
+ };
+
+ opp-1375000000 {
+ opp-hz = /bits/ 64 <1375000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x03>;
+ };
+
opp-1250000000 {
opp-hz = /bits/ 64 <1250000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
opp-peak-kBps = <16500000>;
qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x07>;
};
opp-1175000000 {
@@ -3803,13 +3838,24 @@ opp-1175000000 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x07>;
};
- opp-1100000000 {
+ opp-1100000000-0 {
opp-hz = /bits/ 64 <1100000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x07>;
+ };
+
+ /* Only applicable for SKUs which has 1100Mhz as Fmax */
+ opp-1100000000-1 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0x08>;
};
opp-1000000000 {
@@ -3817,6 +3863,7 @@ opp-1000000000 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82b5ffd>;
+ opp-supported-hw = <0x0f>;
};
opp-925000000 {
@@ -3824,6 +3871,7 @@ opp-925000000 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <14398438>;
qcom,opp-acd-level = <0xa82b5ffd>;
+ opp-supported-hw = <0x0f>;
};
opp-800000000 {
@@ -3831,6 +3879,7 @@ opp-800000000 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <12449219>;
qcom,opp-acd-level = <0xa82c5ffd>;
+ opp-supported-hw = <0x0f>;
};
opp-744000000 {
@@ -3838,13 +3887,24 @@ opp-744000000 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
opp-peak-kBps = <10687500>;
qcom,opp-acd-level = <0x882e5ffd>;
+ opp-supported-hw = <0x0f>;
};
- opp-687000000 {
+ opp-687000000-0 {
opp-hz = /bits/ 64 <687000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <8171875>;
qcom,opp-acd-level = <0x882e5ffd>;
+ opp-supported-hw = <0x0f>;
+ };
+
+ /* Only applicable for SKUs which has 687Mhz as Fmax */
+ opp-687000000-1 {
+ opp-hz = /bits/ 64 <687000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0x882e5ffd>;
+ opp-supported-hw = <0x10>;
};
opp-550000000 {
@@ -3852,6 +3912,7 @@ opp-550000000 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <6074219>;
qcom,opp-acd-level = <0xc0285ffd>;
+ opp-supported-hw = <0x1f>;
};
opp-390000000 {
@@ -3859,6 +3920,7 @@ opp-390000000 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <3000000>;
qcom,opp-acd-level = <0xc0285ffd>;
+ opp-supported-hw = <0x1f>;
};
opp-300000000 {
@@ -3866,6 +3928,7 @@ opp-300000000 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
opp-peak-kBps = <2136719>;
qcom,opp-acd-level = <0xc02b5ffd>;
+ opp-supported-hw = <0x1f>;
};
};
};
@@ -5171,6 +5234,107 @@ usb_1_ss1_dwc3_ss: endpoint {
};
};
+ iris: video-codec@aa00000 {
+ compatible = "qcom,x1e80100-iris", "qcom,sm8550-iris";
+
+ reg = <0 0x0aa00000 0 0xf0000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+ <&videocc VIDEO_CC_MVS0_GDSC>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_MMCX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "mxc",
+ "mmcx";
+ operating-points-v2 = <&iris_opp_table>;
+
+ clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>;
+ clock-names = "iface",
+ "core",
+ "vcodec0_core";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-cfg",
+ "video-mem";
+
+ memory-region = <&video_mem>;
+
+ resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+ reset-names = "bus";
+
+ iommus = <&apps_smmu 0x1940 0>,
+ <&apps_smmu 0x1947 0>;
+ dma-coherent;
+
+ /*
+ * IRIS firmware is signed by vendors, only
+ * enable on boards where the proper signed firmware
+ * is available.
+ */
+ status = "disabled";
+
+ iris_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>,
+ <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-338000000 {
+ opp-hz = /bits/ 64 <338000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_svs>;
+ };
+
+ opp-366000000 {
+ opp-hz = /bits/ 64 <366000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-444000000 {
+ opp-hz = /bits/ 64 <444000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-481000000 {
+ opp-hz = /bits/ 64 <481000000>;
+ required-opps = <&rpmhpd_opp_turbo>,
+ <&rpmhpd_opp_turbo>;
+ };
+ };
+ };
+
+ videocc: clock-controller@aaf0000 {
+ compatible = "qcom,x1e80100-videocc";
+ reg = <0 0x0aaf0000 0 0x10000>;
+ clocks = <&bi_tcxo_div2>,
+ <&gcc GCC_VIDEO_AHB_CLK>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: display-subsystem@ae00000 {
compatible = "qcom,x1e80100-mdss";
reg = <0 0x0ae00000 0 0x1000>;
@@ -5312,16 +5476,20 @@ mdss_dp0: displayport-controller@ae90000 {
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&mdss_dp0_opp_table>;
@@ -5351,6 +5519,7 @@ port@1 {
reg = <1>;
mdss_dp0_out: endpoint {
+ data-lanes = <0 1 2 3>;
remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>;
};
};
@@ -5395,16 +5564,20 @@ mdss_dp1: displayport-controller@ae98000 {
<&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&mdss_dp1_opp_table>;
@@ -5434,6 +5607,7 @@ port@1 {
reg = <1>;
mdss_dp1_out: endpoint {
+ data-lanes = <0 1 2 3>;
remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>;
};
};
@@ -5478,16 +5652,20 @@ mdss_dp2: displayport-controller@ae9a000 {
<&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
- "stream_pixel";
+ "stream_pixel",
+ "stream_1_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
assigned-clock-parents = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
operating-points-v2 = <&mdss_dp2_opp_table>;
@@ -5516,6 +5694,7 @@ port@1 {
reg = <1>;
mdss_dp2_out: endpoint {
+ data-lanes = <0 1 2 3>;
remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>;
};
};
@@ -5597,6 +5776,9 @@ mdss_dp3_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ };
};
};
@@ -5779,6 +5961,12 @@ tlmm: pinctrl@f100000 {
gpio-ranges = <&tlmm 0 0 239>;
wakeup-parent = <&pdc>;
+ edp0_hpd_default: edp0-hpd-default-state {
+ pins = "gpio119";
+ function = "edp0_hot";
+ bias-disable;
+ };
+
qup_i2c0_data_clk: qup-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio0", "gpio1";
@@ -8251,6 +8439,18 @@ sbsa_watchdog: watchdog@1c840000 {
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
+ qfprom: efuse@221c8000 {
+ compatible = "qcom,x1e80100-qfprom", "qcom,qfprom";
+ reg = <0 0x221c8000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpu_speed_bin: gpu-speed-bin@119 {
+ reg = <0x119 0x2>;
+ bits = <7 8>;
+ };
+ };
+
pmu@24091000 {
compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
reg = <0 0x24091000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
index cf07860..cf999c2 100644
--- a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
@@ -15,3 +15,7 @@ / {
model = "Qualcomm Technologies, Inc. X1P42100 CRD";
compatible = "qcom,x1p42100-crd", "qcom,x1p42100";
};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1p42100/gen71500_zap.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
new file mode 100644
index 0000000..6696cab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "x1p42100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+ model = "HP Omnibook X 14-fe1";
+ compatible = "hp,omnibook-x14-fe1", "qcom,x1p42100";
+ chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcdxkmsucpurwa.mbn";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcadsp8380.mbn",
+ "qcom/x1p42100/hp/omnibook-x14/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1p42100/hp/omnibook-x14/qccdsp8380.mbn",
+ "qcom/x1p42100/hp/omnibook-x14/cdsp_dtbs.elf";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
new file mode 100644
index 0000000..1ac46cd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
@@ -0,0 +1,1625 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Jens Glathe
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1p42100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+ model = "Lenovo ThinkBook 16 Gen 7 QOY";
+ compatible = "lenovo,thinkbook-16", "qcom,x1p42100";
+ chassis-type = "laptop";
+
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8550_pwm 3 500000>;
+
+ power-supply = <&vreg_edp_bl>;
+ };
+
+ /*
+ * This is an odd one. The camera is physically behind the eusb9 repeater (confirmed) but
+ * if it is placed below the usb_2_dwc3 node, it will be switched off after ~30 seconds.
+ * The reason seems to be that the dwc3 driver does not probe for child nodes when in
+ * host-only mode. But that's the default setting for the xhci controllers due to issues
+ * when in OTG mode. https://lore.kernel.org/all/20241210111444.26240-1-johan+linaro@kernel.org/
+ * The whole reason it is described in the dt (as an USB device) is its requirement for
+ * that additional regulator, and to get power management to switch it off when suspended.
+ * Defining it stand-alone does work.
+ */
+ camera {
+ compatible = "usb5986,1198";
+
+ vdd-supply = <&vreg_cam_5p0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+ /* Display-adjacent port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "host";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss0_sbu_mux>;
+ };
+ };
+ };
+ };
+
+ /* User-adjacent port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "host";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss1_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ sound {
+ compatible = "qcom,x1e80100-sndcard";
+ model = "X1E80100-LENOVO-ThinkBook-16";
+ audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ usb-1-ss0-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 168 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss0_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_sbu>;
+ };
+ };
+ };
+
+ usb-1-ss1-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 179 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss1_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_sbu>;
+ };
+ };
+ };
+
+ vreg_cam_5p0: regulator-cam-5p0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_CAM_5P0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&cam_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_edp_bl: regulator-edp-bl {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VBL9";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_bl_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_MISC_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&misc_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qcdxkmsucpurwa.mbn";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ pinctrl-0 = <&qup_i2c2_data_clk>, <&tpad_default>, <&kybd_default>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* ELAN06FA */
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* CIRQ1080 or SYNA2BA6 */
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* FTCS0038 */
+ touchpad@38 {
+ compatible = "hid-over-i2c";
+ reg = <0x38>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* GXTP5100 */
+ touchpad@5d {
+ compatible = "hid-over-i2c";
+ reg = <0x5d>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ eusb5_repeater: redriver@43 {
+ compatible = "nxp,ptn3222";
+ reg = <0x43>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+ };
+
+ eusb3_repeater: redriver@47 {
+ compatible = "nxp,ptn3222";
+ reg = <0x47>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb3_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb9_repeater: redriver@4b {
+ compatible = "nxp,ptn3222";
+ reg = <0x4b>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb9_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb6_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb6_reset_n>;
+ pinctrl-names = "default";
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ILIT2911 or GTCH1563 */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l15b_1p8>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&lpass_tlmm {
+ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ pinctrl-0 = <&edp_hpd_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+
+ backlight = <&backlight>;
+
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
+ power-supply = <&vreg_edp_3p3>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dp3_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_pwm {
+ status = "okay";
+};
+
+&pm8550ve_8_gpios {
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-disable;
+ output-enable;
+ drive-push-pull;
+ power-source = <1>; /* 1.8 V */
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ input-disable;
+ output-enable;
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio10";
+ function = "normal";
+ };
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qcadsp8380.mbn",
+ "qcom/x1p42100/LENOVO/21NH/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qccdsp8380.mbn",
+ "qcom/x1p42100/LENOVO/21NH/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l6b_1p8>;
+ status = "okay";
+};
+
+&smb2360_0 {
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+ status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Left Speaker */
+ left_spkr: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Right Speaker */
+ right_spkr: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9385 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9385 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* Unused */
+ <72 2>; /* Secure EC I2C connection (?) */
+
+ edp_hpd_default: edp-hpd-default-state {
+ pins = "gpio119";
+ function = "edp0_hot";
+ bias-disable;
+ };
+
+ cam_reg_en: cam-reg-en-state {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ eusb3_reset_n: eusb3-reset-n-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb6_reset_n: eusb6-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb9_reset_n: eusb9-reset-n-state {
+ pins = "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-disable;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_card_det_n: sdc2-card-det-state {
+ pins = "gpio71";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tpad_default: tpad-default-state {
+ pins = "gpio3";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
+
+ usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+ oe-n-pins {
+ pins = "gpio167";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio168";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ };
+
+ usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+ oe-n-pins {
+ pins = "gpio178";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio179";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2 {
+ status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ phys = <&usb_1_ss2_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&eusb5_repeater>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb9_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb6_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb3_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100.dtsi b/arch/arm64/boot/dts/qcom/x1p42100.dtsi
index 9af9e70..10d2695 100644
--- a/arch/arm64/boot/dts/qcom/x1p42100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1p42100.dtsi
@@ -17,6 +17,8 @@
/delete-node/ &cpu_pd9;
/delete-node/ &cpu_pd10;
/delete-node/ &cpu_pd11;
+/delete-node/ &gpu_opp_table;
+/delete-node/ &gpu_speed_bin;
/delete-node/ &pcie3_phy;
/delete-node/ &thermal_zones;
@@ -24,9 +26,117 @@ &gcc {
compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc";
};
-/* The GPU is physically different and will be brought up later */
+&gmu {
+ compatible = "qcom,adreno-gmu-x145.0", "qcom,adreno-gmu";
+};
+
&gpu {
- /delete-property/ compatible;
+ compatible = "qcom,adreno-43030c00", "qcom,adreno";
+
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2-adreno", "operating-points-v2";
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa8295ffd>;
+ opp-supported-hw = <0x3>;
+ };
+
+ opp-1250000000 {
+ opp-hz = /bits/ 64 <1250000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0x882a5ffd>;
+ opp-supported-hw = <0x7>;
+ };
+
+ opp-1107000000 {
+ opp-hz = /bits/ 64 <1107000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0x882a5ffd>;
+ opp-supported-hw = <0xf>;
+ };
+
+ opp-1014000000 {
+ opp-hz = /bits/ 64 <1014000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ opp-peak-kBps = <14398438>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0xf>;
+ };
+
+ opp-940000000 {
+ opp-hz = /bits/ 64 <940000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ opp-peak-kBps = <14398438>;
+ qcom,opp-acd-level = <0xa82a5ffd>;
+ opp-supported-hw = <0xf>;
+ };
+
+ opp-825000000 {
+ opp-hz = /bits/ 64 <825000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ opp-peak-kBps = <12449219>;
+ qcom,opp-acd-level = <0x882b5ffd>;
+ opp-supported-hw = <0xf>;
+ };
+
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ opp-peak-kBps = <10687500>;
+ qcom,opp-acd-level = <0xa82c5ffd>;
+ opp-supported-hw = <0xf>;
+ };
+
+ opp-666000000-0 {
+ opp-hz = /bits/ 64 <666000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <8171875>;
+ qcom,opp-acd-level = <0xa82d5ffd>;
+ opp-supported-hw = <0xf>;
+ };
+
+ /* Only applicable for SKUs which has 666Mhz as Fmax */
+ opp-666000000-1 {
+ opp-hz = /bits/ 64 <666000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <16500000>;
+ qcom,opp-acd-level = <0xa82d5ffd>;
+ opp-supported-hw = <0x10>;
+ };
+
+ opp-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ opp-peak-kBps = <6074219>;
+ qcom,opp-acd-level = <0x882e5ffd>;
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-380000000 {
+ opp-hz = /bits/ 64 <380000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ opp-peak-kBps = <3000000>;
+ qcom,opp-acd-level = <0xc82f5ffd>;
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-280000000 {
+ opp-hz = /bits/ 64 <280000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ opp-peak-kBps = <2136719>;
+ qcom,opp-acd-level = <0xc82f5ffd>;
+ opp-supported-hw = <0x1f>;
+ };
+ };
+
};
&gpucc {
@@ -42,6 +152,13 @@ &pcie6a_phy {
compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy";
};
+&qfprom {
+ gpu_speed_bin: gpu-speed-bin@119 {
+ reg = <0x119 0x2>;
+ bits = <7 9>;
+ };
+};
+
&soc {
/* The PCIe3 PHY on X1P42100 uses a different IP block */
pcie3_phy: phy@1bd4000 {
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 6093d5f..ccdf7aa 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -96,6 +96,18 @@
DTC_FLAGS_r8a779g3-sparrow-hawk += -Wno-spi_bus_bridge
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx219.dtbo
+r8a779g3-sparrow-hawk-camera-j1-imx219-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j1-imx219.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx219.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx462.dtbo
+r8a779g3-sparrow-hawk-camera-j1-imx462-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j1-imx462.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx462.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx219.dtbo
+r8a779g3-sparrow-hawk-camera-j2-imx219-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j2-imx219.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx219.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo
+r8a779g3-sparrow-hawk-camera-j2-imx462-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtb
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtbo
r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb
@@ -180,5 +192,9 @@
dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-sd.dtb
dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
+dtb-$(CONFIG_ARCH_R9A09G077) += r9a09g077m44-rzt2h-evk.dtb
+
+dtb-$(CONFIG_ARCH_R9A09G087) += r9a09g087m44-rzn2h-evk.dtb
+
dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index c8b87ae..6b737d9 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1186,7 +1186,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index f2fc2a2..3f15d65 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -1070,7 +1070,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 530ffd2..55df063 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1029,7 +1029,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index e4dbda8..5d730b4 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1298,7 +1298,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 6ee9cde..c389ebc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -1373,7 +1373,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index a323ac4..6d03901 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -1245,7 +1245,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 49f6d31..1637b53 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -1245,7 +1245,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 136a22c..353a771 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1108,7 +1108,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 0174449..e7a5800 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -568,7 +568,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77970_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index f7e506a..964aa14 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -621,7 +621,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77980_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 6b87420..e16ede6 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1061,7 +1061,7 @@ canfd: can@e66c0000 {
<&can_clk>;
clock-names = "fck", "canfd", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
- assigned-clock-rates = <40000000>;
+ assigned-clock-rates = <80000000>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 914>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 95ff693..2c3fb34a 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -2949,7 +2949,7 @@ isp3vin31: endpoint {
};
};
- dsi0: dsi-encoder@fed80000 {
+ dsi0: dsi@fed80000 {
compatible = "renesas,r8a779a0-dsi-csi2-tx";
reg = <0 0xfed80000 0 0x10000>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2977,7 +2977,7 @@ port@1 {
};
};
- dsi1: dsi-encoder@fed90000 {
+ dsi1: dsi@fed90000 {
compatible = "renesas,r8a779a0-dsi-csi2-tx";
reg = <0 0xfed90000 0 0x10000>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 8d9ca30..4fae063 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -2476,7 +2476,7 @@ isp1vin15: endpoint {
};
};
- dsi0: dsi-encoder@fed80000 {
+ dsi0: dsi@fed80000 {
compatible = "renesas,r8a779g0-dsi-csi2-tx";
reg = <0 0xfed80000 0 0x10000>;
clocks = <&cpg CPG_MOD 415>,
@@ -2505,7 +2505,7 @@ port@1 {
};
};
- dsi1: dsi-encoder@fed90000 {
+ dsi1: dsi@fed90000 {
compatible = "renesas,r8a779g0-dsi-csi2-tx";
reg = <0 0xfed90000 0 0x10000>;
clocks = <&cpg CPG_MOD 416>,
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso
new file mode 100644
index 0000000..3acaf71
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX219 camera sensor on connector J1 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+ clk_cam_j1: clk-cam-j1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ /* Page 29 / CSI_IF_CN / J1 */
+ reg_cam_j1: reg-cam-j1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam-J1";
+ enable-active-high;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ cam@10 {
+ compatible = "sony,imx219";
+ reg = <0x10>;
+
+ clocks = <&clk_cam_j1>;
+
+ VANA-supply = <®_cam_j1>;
+ VDIG-supply = <®_cam_j1>;
+ VDDL-supply = <®_cam_j1>;
+
+ orientation = <2>;
+ rotation = <0>;
+
+ port {
+ imx219_j1_out: endpoint {
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <456000000>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&imx219_j1_out>;
+ };
+ };
+ };
+};
+
+&isp0 {
+ status = "okay";
+};
+
+&vin00 {
+ status = "okay";
+};
+
+&vin01 {
+ status = "okay";
+};
+
+&vin02 {
+ status = "okay";
+};
+
+&vin03 {
+ status = "okay";
+};
+
+&vin04 {
+ status = "okay";
+};
+
+&vin05 {
+ status = "okay";
+};
+
+&vin06 {
+ status = "okay";
+};
+
+&vin07 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso
new file mode 100644
index 0000000..a19bc08
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX462 camera sensor on connector J1 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+ clk_cam_j1: clk-cam-j1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <37125000>;
+ };
+
+ /* Page 29 / CSI_IF_CN / J1 */
+ reg_cam_j1: reg-cam-j1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam-J1";
+ enable-active-high;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ cam@1a {
+ compatible = "sony,imx462lqr";
+ reg = <0x1a>;
+
+ clocks = <&clk_cam_j1>;
+ clock-names = "xclk";
+ clock-frequency = <37125000>;
+
+ vdddo-supply = <®_cam_j1>;
+ vdda-supply = <®_cam_j1>;
+ vddd-supply = <®_cam_j1>;
+
+ orientation = <2>;
+ rotation = <0>;
+
+ port {
+ imx462_j1_out: endpoint {
+ link-frequencies = /bits/ 64 <222750000 148500000>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&imx462_j1_out>;
+ };
+ };
+ };
+};
+
+&isp0 {
+ status = "okay";
+};
+
+&vin00 {
+ status = "okay";
+};
+
+&vin01 {
+ status = "okay";
+};
+
+&vin02 {
+ status = "okay";
+};
+
+&vin03 {
+ status = "okay";
+};
+
+&vin04 {
+ status = "okay";
+};
+
+&vin05 {
+ status = "okay";
+};
+
+&vin06 {
+ status = "okay";
+};
+
+&vin07 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso
new file mode 100644
index 0000000..512810b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX219 camera sensor on connector J2 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+ clk_cam_j2: clk-cam-j2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ /* Page 29 / CSI_IF_CN / J2 */
+ reg_cam_j2: reg-cam-j2 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam-J2";
+ enable-active-high;
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ cam@10 {
+ compatible = "sony,imx219";
+ reg = <0x10>;
+
+ clocks = <&clk_cam_j2>;
+
+ VANA-supply = <®_cam_j2>;
+ VDIG-supply = <®_cam_j2>;
+ VDDL-supply = <®_cam_j2>;
+
+ orientation = <2>;
+ rotation = <0>;
+
+ port {
+ imx219_j2_out: endpoint {
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <456000000>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi41_in>;
+ };
+ };
+ };
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi41 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi41_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&imx219_j2_out>;
+ };
+ };
+ };
+};
+
+&isp1 {
+ status = "okay";
+};
+
+&vin08 {
+ status = "okay";
+};
+
+&vin09 {
+ status = "okay";
+};
+
+&vin10 {
+ status = "okay";
+};
+
+&vin11 {
+ status = "okay";
+};
+
+&vin12 {
+ status = "okay";
+};
+
+&vin13 {
+ status = "okay";
+};
+
+&vin14 {
+ status = "okay";
+};
+
+&vin15 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso
new file mode 100644
index 0000000..a31524b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX462 camera sensor on connector J2 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+ clk_cam_j2: clk-cam-j2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <37125000>;
+ };
+
+ /* Page 29 / CSI_IF_CN / J2 */
+ reg_cam_j2: reg-cam-j2 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam-J2";
+ enable-active-high;
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ cam@1a {
+ compatible = "sony,imx462lqr";
+ reg = <0x1a>;
+
+ clocks = <&clk_cam_j2>;
+ clock-names = "xclk";
+ clock-frequency = <37125000>;
+
+ vdddo-supply = <®_cam_j2>;
+ vdda-supply = <®_cam_j2>;
+ vddd-supply = <®_cam_j2>;
+
+ orientation = <2>;
+ rotation = <0>;
+
+ port {
+ imx462_j2_out: endpoint {
+ link-frequencies = /bits/ 64 <222750000 148500000>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi41_in>;
+ };
+ };
+ };
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi41 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi41_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&imx462_j2_out>;
+ };
+ };
+ };
+};
+
+&isp1 {
+ status = "okay";
+};
+
+&vin08 {
+ status = "okay";
+};
+
+&vin09 {
+ status = "okay";
+};
+
+&vin10 {
+ status = "okay";
+};
+
+&vin11 {
+ status = "okay";
+};
+
+&vin12 {
+ status = "okay";
+};
+
+&vin13 {
+ status = "okay";
+};
+
+&vin14 {
+ status = "okay";
+};
+
+&vin15 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
index 50d53c8..fbfec57 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
- * Device Tree Overlay for the PWM controlled blower fan in connector J3:FAN
+ * Device Tree Overlay for the PWM controlled blower fan on connector J3:FAN
* on R-Car V4H ES3.0 Sparrow Hawk board
*
* Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
@@ -9,21 +9,16 @@
*
* # Localize hwmon sysfs directory that matches the PWM fan,
* # enable the PWM fan, and configure the fan speed manually.
- * r8a779g3-sparrow-hawk$ grep -H . /sys/class/hwmon/hwmon?/name
- * /sys/class/hwmon/hwmon0/name:sensor1_thermal
- * /sys/class/hwmon/hwmon1/name:sensor2_thermal
- * /sys/class/hwmon/hwmon2/name:sensor3_thermal
- * /sys/class/hwmon/hwmon3/name:sensor4_thermal
- * /sys/class/hwmon/hwmon4/name:pwmfan
- * ^ ^^^^^^
+ * r8a779g3-sparrow-hawk$ ls -1 /sys/devices/platform/pwm-fan/hwmon/hwmon?/pwm?_enable
+ * /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1_enable
*
* # Select mode 2 , enable fan PWM and regulator and keep them enabled.
* # For details, see Linux Documentation/hwmon/pwm-fan.rst
- * r8a779g3-sparrow-hawk$ echo 2 > /sys/class/hwmon/hwmon4/pwm1_enable
+ * r8a779g3-sparrow-hawk$ echo 2 > /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1_enable
*
* # Configure PWM fan speed in range 0..255 , 0 is stopped , 255 is full speed .
* # Fan speed 101 is about 2/5 of the PWM fan speed:
- * r8a779g3-sparrow-hawk$ echo 101 > /sys/class/hwmon/hwmon4/pwm1
+ * r8a779g3-sparrow-hawk$ echo 101 > /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
index 9ba2312..1da8e47 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
@@ -38,6 +38,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
#include "r8a779g3.dtsi"
@@ -185,7 +186,42 @@ vcc_sdhi: regulator-vcc-sdhi {
regulator-max-microvolt = <3300000>;
gpios = <&gpio8 13 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 0>, <1800000 1>;
+ states = <1800000 0>, <3300000 1>;
+ };
+};
+
+/* Use thermal-idle cooling for all SoC cores */
+&a76_0 {
+ #cooling-cells = <2>;
+
+ a76_0_thermal_idle: thermal-idle {
+ #cooling-cells = <2>;
+ duration-us = <10000>;
+ exit-latency-us = <500>;
+ };
+};
+
+&a76_1 {
+ a76_1_thermal_idle: thermal-idle {
+ #cooling-cells = <2>;
+ duration-us = <10000>;
+ exit-latency-us = <500>;
+ };
+};
+
+&a76_2 {
+ a76_2_thermal_idle: thermal-idle {
+ #cooling-cells = <2>;
+ duration-us = <10000>;
+ exit-latency-us = <500>;
+ };
+};
+
+&a76_3 {
+ a76_3_thermal_idle: thermal-idle {
+ #cooling-cells = <2>;
+ duration-us = <10000>;
+ exit-latency-us = <500>;
};
};
@@ -556,6 +592,10 @@ pins-mii {
drive-strength = <21>;
};
+ pins-vddq18-25-avb {
+ pins = "PIN_VDDQ_AVB0", "PIN_VDDQ_AVB1", "PIN_VDDQ_AVB2", "PIN_VDDQ_TSN0";
+ power-source = <1800>;
+ };
};
/* Page 28 / CANFD_IF */
@@ -756,7 +796,11 @@ &rpc {
status = "okay";
flash@0 {
- compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ /*
+ * EVTA1 is populated with Spansion S25FS512S
+ * EVTB1 is populated with Winbond W77Q51NW
+ */
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
spi-rx-bus-width = <4>;
@@ -797,3 +841,104 @@ &rwdt {
&scif_clk { /* X12 */
clock-frequency = <24000000>;
};
+
+/* THS sensors in SoC, critical temperature trip point is 100C */
+&sensor1_crit {
+ temperature = <100000>;
+};
+
+&sensor2_crit {
+ temperature = <100000>;
+};
+
+&sensor3_crit {
+ temperature = <100000>;
+};
+
+&sensor4_crit {
+ temperature = <100000>;
+};
+
+/* THS sensor in SoC near CA76 cores does more progressive cooling. */
+&sensor_thermal_ca76 {
+ critical-action = "shutdown";
+
+ cooling-maps {
+ /*
+ * The cooling-device minimum and maximum parameters inversely
+ * match opp-table-0 {} node entries in r8a779g0.dtsi, in other
+ * words, 0 refers to 1.8 GHz OPP and 4 refers to 500 MHz OPP.
+ * This is because they refer to cooling levels, where maximum
+ * cooling level happens at 500 MHz OPP, when the CPU core is
+ * running slowly and therefore generates least heat.
+ */
+ map0 {
+ /* At 68C, inhibit 1.7 GHz and 1.8 GHz modes */
+ trip = <&sensor3_passive_low>;
+ cooling-device = <&a76_0 2 4>;
+ contribution = <128>;
+ };
+
+ map1 {
+ /* At 72C, inhibit 1.5 GHz mode */
+ trip = <&sensor3_passive_mid>;
+ cooling-device = <&a76_0 3 4>;
+ contribution = <256>;
+ };
+
+ map2 {
+ /* At 76C, start injecting idle states 0..80% of time */
+ trip = <&sensor3_passive_hi>;
+ cooling-device = <&a76_0_thermal_idle 0 80>,
+ <&a76_1_thermal_idle 0 80>,
+ <&a76_2_thermal_idle 0 80>,
+ <&a76_3_thermal_idle 0 80>;
+ contribution = <512>;
+ };
+
+ map3 {
+ /* At 80C, inhibit 1.0 GHz mode */
+ trip = <&sensor3_passive_crit>;
+ cooling-device = <&a76_0 4 4>;
+ contribution = <1024>;
+ };
+ };
+
+ trips {
+ sensor3_passive_low: sensor3-passive-low {
+ temperature = <68000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ sensor3_passive_mid: sensor3-passive-mid {
+ temperature = <72000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ sensor3_passive_hi: sensor3-passive-hi {
+ temperature = <76000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ sensor3_passive_crit: sensor3-passive-crit {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+};
+
+&sensor_thermal_cnn {
+ critical-action = "shutdown";
+};
+
+&sensor_thermal_cr52 {
+ critical-action = "shutdown";
+};
+
+&sensor_thermal_ddr1 {
+ critical-action = "shutdown";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
index ed1eefa..0f20a2d 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
@@ -2144,7 +2144,7 @@ isp1vin15: endpoint {
};
};
- dsi0: dsi-encoder@fed80000 {
+ dsi0: dsi@fed80000 {
compatible = "renesas,r8a779h0-dsi-csi2-tx";
reg = <0 0xfed80000 0 0x10000>;
clocks = <&cpg CPG_MOD 415>,
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index 0364f89..16e6ac6 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -272,6 +272,42 @@ channel@8 {
};
};
+ i3c: i3c@1005b000 {
+ compatible = "renesas,r9a08g045-i3c";
+ reg = <0 0x1005b000 0 0x1000>;
+ clocks = <&cpg CPG_MOD R9A08G045_I3C_PCLK>,
+ <&cpg CPG_MOD R9A08G045_I3C_TCLK>;
+ clock-names = "pclk", "tclk";
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ierr", "terr", "abort", "resp",
+ "cmd", "ibi", "rx", "tx", "rcv",
+ "st", "sp", "tend", "nack", "al",
+ "tmo", "wu", "exit";
+ resets = <&cpg R9A08G045_I3C_PRESETN>,
+ <&cpg R9A08G045_I3C_TRESETN>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
vbattb: clock-controller@1005c000 {
compatible = "renesas,r9a08g045-vbattb";
reg = <0 0x1005c000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
index e4fac7e..47d843c 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
@@ -301,6 +301,176 @@ xspi: spi@11030000 {
status = "disabled";
};
+ dmac0: dma-controller@11400000 {
+ compatible = "renesas,r9a09g047-dmac",
+ "renesas,r9a09g057-dmac";
+ reg = <0 0x11400000 0 0x10000>;
+ interrupts = <GIC_SPI 499 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 91 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 94 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 95 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 101 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 104 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 0x0>;
+ power-domains = <&cpg>;
+ resets = <&cpg 0x31>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ renesas,icu = <&icu 4>;
+ };
+
+ dmac1: dma-controller@14830000 {
+ compatible = "renesas,r9a09g047-dmac",
+ "renesas,r9a09g057-dmac";
+ reg = <0 0x14830000 0 0x10000>;
+ interrupts = <GIC_SPI 495 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 0x1>;
+ power-domains = <&cpg>;
+ resets = <&cpg 0x32>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ renesas,icu = <&icu 0>;
+ };
+
+ dmac2: dma-controller@14840000 {
+ compatible = "renesas,r9a09g047-dmac",
+ "renesas,r9a09g057-dmac";
+ reg = <0 0x14840000 0 0x10000>;
+ interrupts = <GIC_SPI 496 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 0x2>;
+ power-domains = <&cpg>;
+ resets = <&cpg 0x33>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ renesas,icu = <&icu 1>;
+ };
+
+ dmac3: dma-controller@12000000 {
+ compatible = "renesas,r9a09g047-dmac",
+ "renesas,r9a09g057-dmac";
+ reg = <0 0x12000000 0 0x10000>;
+ interrupts = <GIC_SPI 497 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 0x3>;
+ power-domains = <&cpg>;
+ resets = <&cpg 0x34>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ renesas,icu = <&icu 2>;
+ };
+
+ dmac4: dma-controller@12010000 {
+ compatible = "renesas,r9a09g047-dmac",
+ "renesas,r9a09g057-dmac";
+ reg = <0 0x12010000 0 0x10000>;
+ interrupts = <GIC_SPI 498 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 81 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 0x4>;
+ power-domains = <&cpg>;
+ resets = <&cpg 0x35>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ renesas,icu = <&icu 3>;
+ };
+
scif0: serial@11c01400 {
compatible = "renesas,scif-r9a09g047", "renesas,scif-r9a09g057";
reg = <0 0x11c01400 0 0x400>;
@@ -322,6 +492,41 @@ scif0: serial@11c01400 {
status = "disabled";
};
+ i3c: i3c@12400000 {
+ compatible = "renesas,r9a09g047-i3c";
+ reg = <0 0x12400000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0x91>,
+ <&cpg CPG_MOD 0x92>,
+ <&cpg CPG_MOD 0x90>;
+ clock-names = "pclk", "tclk", "pclkrw";
+ interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ierr", "terr", "abort", "resp",
+ "cmd", "ibi", "rx", "tx", "rcv",
+ "st", "sp", "tend", "nack", "al",
+ "tmo", "wu";
+ resets = <&cpg 0x96>, <&cpg 0x97>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
canfd: can@12440000 {
compatible = "renesas,r9a09g047-canfd";
reg = <0 0x12440000 0 0x40000>;
@@ -722,9 +927,8 @@ eth0: ethernet@15c30000 {
snps,perfect-filter-entries = <128>;
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
- snps,fixed-burst;
- snps,no-pbl-x8;
- snps,force_thresh_dma_mode;
+ snps,mixed-burst;
+ snps,force_sf_dma_mode;
snps,axi-config = <&stmmac_axi_setup>;
snps,mtl-rx-config = <&mtl_rx_setup0>;
snps,mtl-tx-config = <&mtl_tx_setup0>;
@@ -823,9 +1027,8 @@ eth1: ethernet@15c40000 {
snps,perfect-filter-entries = <128>;
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
- snps,fixed-burst;
- snps,no-pbl-x8;
- snps,force_thresh_dma_mode;
+ snps,mixed-burst;
+ snps,force_sf_dma_mode;
snps,axi-config = <&stmmac_axi_setup>;
snps,mtl-rx-config = <&mtl_rx_setup1>;
snps,mtl-tx-config = <&mtl_tx_setup1>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
index 1e67f0a..08e814c0 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
@@ -90,10 +90,10 @@ &i2c0 {
};
&keys {
- key-sleep {
- pinctrl-0 = <&nmi_pins>;
- pinctrl-names = "default";
+ pinctrl-0 = <&nmi_pins>;
+ pinctrl-names = "default";
+ key-sleep {
interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>;
linux,code = <KEY_SLEEP>;
label = "SLEEP";
@@ -132,6 +132,7 @@ i2c0_pins: i2c0 {
nmi_pins: nmi {
pinmux = <RZG3E_PORT_PINMUX(S, 0, 0)>; /* NMI */
+ input-schmitt-enable;
};
scif_pins: scif {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
index 10d3b97..8871108 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
@@ -369,6 +369,39 @@ scif: serial@11c01400 {
status = "disabled";
};
+ i3c: i3c@12400000 {
+ compatible = "renesas,r9a09g056-i3c", "renesas,r9a09g047-i3c";
+ reg = <0 0x12400000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0x91>, <&cpg CPG_MOD 0x92>, <&cpg CPG_MOD 0x90>;
+ clock-names = "pclk", "tclk", "pclkrw";
+ interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ierr", "terr", "abort", "resp",
+ "cmd", "ibi", "rx", "tx", "rcv",
+ "st", "sp", "tend", "nack",
+ "al", "tmo", "wu";
+ resets = <&cpg 0x96>, <&cpg 0x97>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c0: i2c@14400400 {
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
reg = <0 0x14400400 0 0x400>;
@@ -735,10 +768,10 @@ eth0: ethernet@15c30000 {
"rx-queue-0", "rx-queue-1", "rx-queue-2",
"rx-queue-3", "tx-queue-0", "tx-queue-1",
"tx-queue-2", "tx-queue-3";
- clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
- <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>,
- <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
- <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+ clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+ <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+ <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
clock-names = "stmmaceth", "pclk", "ptp_ref",
"tx", "rx", "tx-180", "rx-180";
resets = <&cpg 0xb0>;
@@ -836,10 +869,10 @@ eth1: ethernet@15c40000 {
"rx-queue-0", "rx-queue-1", "rx-queue-2",
"rx-queue-3", "tx-queue-0", "tx-queue-1",
"tx-queue-2", "tx-queue-3";
- clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
- <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>,
- <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
- <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+ clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+ <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+ <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
clock-names = "stmmaceth", "pclk", "ptp_ref",
"tx", "rx", "tx-180", "rx-180";
resets = <&cpg 0xb1>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
index 03aeea7..066e66b 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
@@ -334,7 +334,7 @@ sd1-dat-cmd {
usb20_pins: usb20 {
ovc {
- pinmux = <RZV2N_PORT_PINMUX(9, 6, 14)>; /* OVC */
+ pinmux = <RZV2N_PORT_PINMUX(9, 6, 14)>; /* OVC */
};
vbus {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
index 044f2a2..630f7a9 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
@@ -607,6 +607,102 @@ scif: serial@11c01400 {
status = "disabled";
};
+ i3c: i3c@12400000 {
+ compatible = "renesas,r9a09g057-i3c", "renesas,r9a09g047-i3c";
+ reg = <0 0x12400000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0x91>, <&cpg CPG_MOD 0x92>, <&cpg CPG_MOD 0x90>;
+ clock-names = "pclk", "tclk", "pclkrw";
+ interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ierr", "terr", "abort", "resp",
+ "cmd", "ibi", "rx", "tx", "rcv",
+ "st", "sp", "tend", "nack",
+ "al", "tmo", "wu";
+ resets = <&cpg 0x96>, <&cpg 0x97>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rspi0: spi@12800000 {
+ compatible = "renesas,r9a09g057-rspi";
+ reg = <0x0 0x12800000 0x0 0x400>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 500 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 501 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "idle", "error", "end", "rx", "tx";
+ clocks = <&cpg CPG_MOD 0x54>,
+ <&cpg CPG_MOD 0x55>,
+ <&cpg CPG_MOD 0x56>;
+ clock-names = "pclk", "pclk_sfr", "tclk";
+ resets = <&cpg 0x7b>, <&cpg 0x7c>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rspi1: spi@12800400 {
+ compatible = "renesas,r9a09g057-rspi";
+ reg = <0x0 0x12800400 0x0 0x400>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 502 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 503 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "idle", "error", "end", "rx", "tx";
+ clocks = <&cpg CPG_MOD 0x57>,
+ <&cpg CPG_MOD 0x58>,
+ <&cpg CPG_MOD 0x59>;
+ clock-names = "pclk", "pclk_sfr", "tclk";
+ resets = <&cpg 0x7d>, <&cpg 0x7e>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rspi2: spi@12800800 {
+ compatible = "renesas,r9a09g057-rspi";
+ reg = <0x0 0x12800800 0x0 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 504 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 505 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "idle", "error", "end", "rx", "tx";
+ clocks = <&cpg CPG_MOD 0x5a>,
+ <&cpg CPG_MOD 0x5b>,
+ <&cpg CPG_MOD 0x5c>;
+ clock-names = "pclk", "pclk_sfr", "tclk";
+ resets = <&cpg 0x7f>, <&cpg 0x80>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c0: i2c@14400400 {
compatible = "renesas,riic-r9a09g057";
reg = <0 0x14400400 0 0x400>;
@@ -1020,10 +1116,10 @@ eth0: ethernet@15c30000 {
"rx-queue-0", "rx-queue-1", "rx-queue-2",
"rx-queue-3", "tx-queue-0", "tx-queue-1",
"tx-queue-2", "tx-queue-3";
- clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
- <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>,
- <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
- <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+ clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+ <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+ <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
clock-names = "stmmaceth", "pclk", "ptp_ref",
"tx", "rx", "tx-180", "rx-180";
resets = <&cpg 0xb0>;
@@ -1121,10 +1217,10 @@ eth1: ethernet@15c40000 {
"rx-queue-0", "rx-queue-1", "rx-queue-2",
"rx-queue-3", "tx-queue-0", "tx-queue-1",
"tx-queue-2", "tx-queue-3";
- clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
- <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>,
- <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
- <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+ clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+ <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+ <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
clock-names = "stmmaceth", "pclk", "ptp_ref",
"tx", "rx", "tx-180", "rx-180";
resets = <&cpg 0xb1>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
index 5c3f4e47..5c06bce 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
@@ -353,7 +353,7 @@ sd1_cd {
usb20_pins: usb20 {
ovc {
- pinmux = <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
+ pinmux = <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
};
vbus {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
index d2586d2..adf3ab8 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
- * Device Tree Source for Yuridenki-Shokai the Kakip board
+ * Device Tree Source for the Yuridenki-Shokai Kakip board
*
* Copyright (C) 2024 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*/
@@ -84,7 +84,7 @@ &ostm7 {
&pinctrl {
scif_pins: scif {
- pins = "SCIF_RXD", "SCIF_TXD";
+ pins = "SCIF_RXD", "SCIF_TXD";
};
sd0-pwr-en-hog {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
new file mode 100644
index 0000000..7f1aca2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "renesas,r9a09g077";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a55";
+ reg = <0>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ L3_CA55: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x100000>;
+ cache-level = <3>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ sci0: serial@80005000 {
+ compatible = "renesas,r9a09g077-rsci";
+ reg = <0 0x80005000 0 0x400>;
+ interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci1: serial@80005400 {
+ compatible = "renesas,r9a09g077-rsci";
+ reg = <0 0x80005400 0 0x400>;
+ interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 596 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 9>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci2: serial@80005800 {
+ compatible = "renesas,r9a09g077-rsci";
+ reg = <0 0x80005800 0 0x400>;
+ interrupts = <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 600 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 10>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci3: serial@80005c00 {
+ compatible = "renesas,r9a09g077-rsci";
+ reg = <0 0x80005c00 0 0x400>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 11>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci4: serial@80006000 {
+ compatible = "renesas,r9a09g077-rsci";
+ reg = <0 0x80006000 0 0x400>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 607 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 608 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 12>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci5: serial@81005000 {
+ compatible = "renesas,r9a09g077-rsci";
+ reg = <0 0x81005000 0 0x400>;
+ interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 611 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 612 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 600>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@80082000 {
+ compatible = "renesas,r9a09g077-wdt";
+ reg = <0 0x80082000 0 0x400>,
+ <0 0x81295100 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt1: watchdog@80082400 {
+ compatible = "renesas,r9a09g077-wdt";
+ reg = <0 0x80082400 0 0x400>,
+ <0 0x81295104 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@80082800 {
+ compatible = "renesas,r9a09g077-wdt";
+ reg = <0 0x80082800 0 0x400>,
+ <0 0x81295108 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt3: watchdog@80082c00 {
+ compatible = "renesas,r9a09g077-wdt";
+ reg = <0 0x80082c00 0 0x400>,
+ <0 0x8129510c 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt4: watchdog@80083000 {
+ compatible = "renesas,r9a09g077-wdt";
+ reg = <0 0x80083000 0 0x400>,
+ <0 0x81295110 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt5: watchdog@80083400 {
+ compatible = "renesas,r9a09g077-wdt";
+ reg = <0 0x80083400 0 0x400>,
+ <0 0x81295114 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@80088000 {
+ compatible = "renesas,riic-r9a09g077";
+ reg = <0 0x80088000 0 0x400>;
+ interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 615 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 616 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eei", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 100>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@80088400 {
+ compatible = "renesas,riic-r9a09g077";
+ reg = <0 0x80088400 0 0x400>;
+ interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 619 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 620 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eei", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 101>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@81008000 {
+ compatible = "renesas,riic-r9a09g077";
+ reg = <0 0x81008000 0 0x400>;
+ interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 623 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eei", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ cpg: clock-controller@80280000 {
+ compatible = "renesas,r9a09g077-cpg-mssr";
+ reg = <0 0x80280000 0 0x1000>,
+ <0 0x81280000 0 0x9000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ pinctrl: pinctrl@802c0000 {
+ compatible = "renesas,r9a09g077-pinctrl";
+ reg = <0 0x802c0000 0 0x10000>,
+ <0 0x812c0000 0 0x10000>,
+ <0 0x802b0000 0 0x10000>;
+ reg-names = "nsr", "srs", "srn";
+ clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 288>;
+ power-domains = <&cpg>;
+ };
+
+ gic: interrupt-controller@83000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x83000000 0 0x40000>,
+ <0x0 0x83040000 0 0x160000>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ ohci: usb@92040000 {
+ compatible = "generic-ohci";
+ reg = <0 0x92040000 0 0x100>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>;
+ phys = <&usb2_phy 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci: usb@92040100 {
+ compatible = "generic-ehci";
+ reg = <0 0x92040100 0 0x100>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>;
+ phys = <&usb2_phy 2>;
+ phy-names = "usb";
+ companion = <&ohci>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy: usb-phy@92040200 {
+ compatible = "renesas,usb2-phy-r9a09g077";
+ reg = <0 0x92040200 0 0x700>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>,
+ <&cpg CPG_CORE R9A09G077_USB_CLK>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ hsusb: usb@92041000 {
+ compatible = "renesas,usbhs-r9a09g077";
+ reg = <0 0x92041000 0 0x1000>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>;
+ phys = <&usb2_phy 3>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi0: mmc@92080000 {
+ compatible = "renesas,sdhi-r9a09g077",
+ "renesas,sdhi-r9a09g057";
+ reg = <0x0 0x92080000 0 0x10000>;
+ interrupts = <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1212>,
+ <&cpg CPG_CORE R9A09G077_SDHI_CLKHS>;
+ clock-names = "aclk", "clkh";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ sdhi0_vqmmc: vqmmc-regulator {
+ regulator-name = "SDHI0-VQMMC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ status = "disabled";
+ };
+ };
+
+ sdhi1: mmc@92090000 {
+ compatible = "renesas,sdhi-r9a09g077",
+ "renesas,sdhi-r9a09g057";
+ reg = <0x0 0x92090000 0 0x10000>;
+ interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1213>,
+ <&cpg CPG_CORE R9A09G077_SDHI_CLKHS>;
+ clock-names = "aclk", "clkh";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ sdhi1_vqmmc: vqmmc-regulator {
+ regulator-name = "SDHI1-VQMMC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
new file mode 100644
index 0000000..2bf8672
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a09g077m44.dtsi"
+
+/*
+ * SD0 can be connected to either eMMC (IC49) or SD card slot CN31
+ * Lets by default enable the eMMC, note we need the below SW settings
+ * for eMMC.
+ * SW2[1] = ON; SW2[2] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * SW2[1] = OFF; SW2[2] = ON
+ */
+#define SD0_EMMC 1
+#define SD0_SD (!SD0_EMMC)
+
+/*
+ * P17_4 = SD1_CD; SW2[3] = ON
+ * P08_5 = SD1_PWEN; SW2[3] = ON
+ * P08_6 = SD1_IOVS; SW2[3] = ON; SW5[3] = OFF; SW5[4] = ON
+ */
+#define SD1_MICRO_SD 1
+
+/*
+ * USB Pin Configuration:
+ *
+ * This board is equipped with three USB connectors: Type-A (CN80), Mini-B
+ * (CN79), and Micro-AB (CN33). The RZ/T2H SoC has a single USB channel, so
+ * either the USB host interface or the USB function interface can be used,
+ * but not both simultaneously when using the CN79 and CN80 connectors.
+ *
+ * By default, the Type-A (CN80) and Mini-B (CN79) connectors are enabled.
+ * Configure the switches as follows:
+ * - P00_0 - P00_2 (control signals for USB power supply): SW1[5] = ON
+ * - USB_VBUSIN (used for USB function): SW7[7] = OFF; SW7[8] = ON
+ * - USB_VBUSEN (used for USB_HF_VBUSEN): SW7[9] = OFF; SW7[10] = ON
+ *
+ * To enable the Micro-AB (CN33) USB OTG connector, set the following macro
+ * to 1 and configure the switches as follows:
+ * - P00_0 - P00_2 (control signals for USB power supply): SW1[5] = ON
+ * - USB_VBUSIN (used for USB OTG): SW7[7] = ON; SW7[8] = OFF
+ * - USB_VBUSEN (used for USB_OTG_VBUSEN): SW7[9] = ON; SW7[10] = OFF
+ */
+#define USB_OTG 0
+
+#include "rzt2h-n2h-evk-common.dtsi"
+
+/ {
+ model = "Renesas RZ/T2H EVK Board based on r9a09g077m44";
+ compatible = "renesas,rzt2h-evk", "renesas,r9a09g077m44", "renesas,r9a09g077";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* SW8-9: ON, SW8-10: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(23, 1) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <0>;
+ };
+
+ led-1 {
+ /* SW5-1: OFF, SW5-2: ON */
+ gpios = <&pinctrl RZT2H_GPIO(32, 2) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ };
+
+ led-2 {
+ gpios = <&pinctrl RZT2H_GPIO(6, 7) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ };
+
+#if (!SD1_MICRO_SD)
+ led-3 {
+ /* SW2-3: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(8, 5) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <3>;
+ };
+#endif
+
+ led-4 {
+ /* SW8-3: ON, SW8-4: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(18, 0) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <4>;
+ };
+
+ led-5 {
+ /* SW8-1: ON, SW8-2: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <5>;
+ };
+
+ led-6 {
+ /* SW5-9: OFF, SW5-10: ON */
+ gpios = <&pinctrl RZT2H_GPIO(22, 7) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <6>;
+ };
+
+ led-7 {
+ /* SW5-7: OFF, SW5-8: ON */
+ gpios = <&pinctrl RZT2H_GPIO(23, 0) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <7>;
+ };
+
+ led-8 {
+ /* SW7-5: OFF, SW7-6: ON */
+ gpios = <&pinctrl RZT2H_GPIO(23, 5) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <8>;
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&pinctrl {
+ /*
+ * I2C0 Pin Configuration:
+ * ------------------------
+ * Signal | Pin | SW6
+ * -------|---------|--------------
+ * SCL | P23_3 | 7: ON, 8: OFF
+ * SDA | P23_4 | 9: ON, 10: OFF
+ */
+ i2c0_pins: i2c0-pins {
+ pinmux = <RZT2H_PORT_PINMUX(23, 3, 0x17)>,
+ <RZT2H_PORT_PINMUX(23, 4, 0x17)>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinmux = <RZT2H_PORT_PINMUX(5, 0, 0x17)>, /* SDA */
+ <RZT2H_PORT_PINMUX(4, 7, 0x17)>; /* SCL */
+ };
+
+#if USB_OTG
+ usb-exicen-hog {
+ gpio-hog;
+ gpios = <RZT2H_GPIO(0, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb_exicen_a";
+ };
+#endif
+
+ usb_pins: usb-pins {
+ pinmux = <RZT2H_PORT_PINMUX(0, 0, 0x13)>, /* VBUSEN */
+ <RZT2H_PORT_PINMUX(0, 1, 0x13)>; /* OVRCUR */
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
new file mode 100644
index 0000000..6f4a11b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H 4-core SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g077.dtsi"
+
+/ {
+ compatible = "renesas,r9a09g077m44", "renesas,r9a09g077";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
new file mode 100644
index 0000000..f06c19c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "renesas,r9a09g087";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a55";
+ reg = <0>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ L3_CA55: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x100000>;
+ cache-level = <3>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ sci0: serial@80005000 {
+ compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+ reg = <0 0x80005000 0 0x400>;
+ interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci1: serial@80005400 {
+ compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+ reg = <0 0x80005400 0 0x400>;
+ interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 596 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 9>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci2: serial@80005800 {
+ compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+ reg = <0 0x80005800 0 0x400>;
+ interrupts = <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 600 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 10>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci3: serial@80005c00 {
+ compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+ reg = <0 0x80005c00 0 0x400>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 11>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci4: serial@80006000 {
+ compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+ reg = <0 0x80006000 0 0x400>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 607 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 608 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 12>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sci5: serial@81005000 {
+ compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+ reg = <0 0x81005000 0 0x400>;
+ interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 611 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 612 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 600>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@80082000 {
+ compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+ reg = <0 0x80082000 0 0x400>,
+ <0 0x81295100 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt1: watchdog@80082400 {
+ compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+ reg = <0 0x80082400 0 0x400>,
+ <0 0x81295104 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@80082800 {
+ compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+ reg = <0 0x80082800 0 0x400>,
+ <0 0x81295108 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt3: watchdog@80082c00 {
+ compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+ reg = <0 0x80082c00 0 0x400>,
+ <0 0x8129510c 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt4: watchdog@80083000 {
+ compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+ reg = <0 0x80083000 0 0x400>,
+ <0 0x81295110 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt5: watchdog@80083400 {
+ compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+ reg = <0 0x80083400 0 0x400>,
+ <0 0x81295114 0 0x04>;
+ clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+ clock-names = "pclk";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@80088000 {
+ compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+ reg = <0 0x80088000 0 0x400>;
+ interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 615 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 616 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eei", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 100>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@80088400 {
+ compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+ reg = <0 0x80088400 0 0x400>;
+ interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 619 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 620 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eei", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 101>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@81008000 {
+ compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+ reg = <0 0x81008000 0 0x400>;
+ interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 623 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eei", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ cpg: clock-controller@80280000 {
+ compatible = "renesas,r9a09g087-cpg-mssr";
+ reg = <0 0x80280000 0 0x1000>,
+ <0 0x81280000 0 0x9000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ pinctrl: pinctrl@802c0000 {
+ compatible = "renesas,r9a09g087-pinctrl";
+ reg = <0 0x802c0000 0 0x10000>,
+ <0 0x812c0000 0 0x10000>,
+ <0 0x802b0000 0 0x10000>;
+ reg-names = "nsr", "srs", "srn";
+ clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 280>;
+ power-domains = <&cpg>;
+ };
+
+ gic: interrupt-controller@83000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x83000000 0 0x40000>,
+ <0x0 0x83040000 0 0x160000>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ ohci: usb@92040000 {
+ compatible = "generic-ohci";
+ reg = <0 0x92040000 0 0x100>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>;
+ phys = <&usb2_phy 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci: usb@92040100 {
+ compatible = "generic-ehci";
+ reg = <0 0x92040100 0 0x100>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>;
+ phys = <&usb2_phy 2>;
+ phy-names = "usb";
+ companion = <&ohci>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy: usb-phy@92040200 {
+ compatible = "renesas,usb2-phy-r9a09g087", "renesas,usb2-phy-r9a09g077";
+ reg = <0 0x92040200 0 0x700>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>,
+ <&cpg CPG_CORE R9A09G087_USB_CLK>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ hsusb: usb@92041000 {
+ compatible = "renesas,usbhs-r9a09g087", "renesas,usbhs-r9a09g077";
+ reg = <0 0x92041000 0 0x1000>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 408>;
+ phys = <&usb2_phy 3>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi0: mmc@92080000 {
+ compatible = "renesas,sdhi-r9a09g087",
+ "renesas,sdhi-r9a09g057";
+ reg = <0x0 0x92080000 0 0x10000>;
+ interrupts = <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1212>,
+ <&cpg CPG_CORE R9A09G087_SDHI_CLKHS>;
+ clock-names = "aclk", "clkh";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ sdhi0_vqmmc: vqmmc-regulator {
+ regulator-name = "SDHI0-VQMMC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ status = "disabled";
+ };
+ };
+
+ sdhi1: mmc@92090000 {
+ compatible = "renesas,sdhi-r9a09g087",
+ "renesas,sdhi-r9a09g057";
+ reg = <0x0 0x92090000 0 0x10000>;
+ interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1213>,
+ <&cpg CPG_CORE R9A09G087_SDHI_CLKHS>;
+ clock-names = "aclk", "clkh";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ sdhi1_vqmmc: vqmmc-regulator {
+ regulator-name = "SDHI1-VQMMC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
new file mode 100644
index 0000000..084b3a0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a09g087m44.dtsi"
+
+/*
+ * SD0 can be connected to either eMMC (U33) or SD card slot CN21
+ * Lets by default enable the eMMC, note we need the below SW settings
+ * for eMMC.
+ * DSW5[1] = ON; DSW5[2] = ON
+ * DSW17[5] = OFF; DSW17[6] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * DSW5[1] = OFF; DSW5[2] = ON
+ * P22_6 = SD0_WP; DSW15[1] = OFF; DSW15[2] = ON
+ * P22_5 = SD0_CD; DSW15[3] = OFF; DSW15[4] = ON
+ * P02_6 = SD0_IOVS; DSW17[5] = OFF; DSW17[6] = ON
+ * P02_5 = SD0_PWEN; DSW17[7] = OFF; DSW17[8] = ON
+ */
+#define SD0_EMMC 1
+#define SD0_SD (!SD0_EMMC)
+
+/*
+ * P17_4 = SD1_CD; DSW5[3] = ON; DSW19[1] = OFF; DSW19[2] = ON
+ * P08_6 = SD1_IOVS; DSW5[3] = ON
+ */
+#define SD1_MICRO_SD 1
+
+/*
+ * USB Pin Configuration:
+ *
+ * This board is equipped with three USB connectors: Type-A (CN7), Mini-B
+ * (CN8), and Micro-AB (CN9). The RZ/N2H SoC has a single USB channel, so
+ * either the USB host interface or the USB function interface can be used,
+ * but not both simultaneously when using the CN7 and CN8 connectors.
+ *
+ * By default, the Type-A (CN7) and Mini-B (CN8) connectors are enabled.
+ * Configure the switches as follows:
+ * - P02_2 - P02_3 (control signals for USB power supply): DSW2[6] = OFF;
+ * - P02_2 (used for VBUSEN): DSW14[5] = OFF; DSW14[6] = ON
+ * - P02_3 (used for USB_OVRCUR): DSW14[1] = OFF; DSW14[2] = ON
+ * - USB_VBUSIN (used for VBUS of CN8): DSW16[1] = OFF; DSW16[2] = ON
+ * - USB_VBUSEN (used for USB_HF_VBUSEN): DSW16[3] = OFF; DSW16[4] = ON
+ *
+ * To enable the Micro-AB (CN9) USB OTG connector, set the following macro
+ * to 1 and configure the switches as follows:
+ * - P02_2 - P02_3 (control signals for USB power supply): DSW2[6] = OFF;
+ * - P02_2 (used for VBUSEN): DSW14[5] = OFF; DSW14[6] = ON
+ * - P02_3 (used for USB_OVRCUR): DSW14[1] = OFF; DSW14[2] = ON
+ * - USB_VBUSIN (used for VBUS for OTG): DSW16[1] = ON; DSW16[2] = OFF
+ * - USB_VBUSEN (used for USB_OTG_VBUSEN): DSW16[3] = ON; DSW16[4] = OFF
+ * - USB_EXICEN (used for USB OTG EXICEN): DSW14[3] = OFF; DSW14[4] = ON
+ */
+#define USB_OTG 0
+
+#include "rzt2h-n2h-evk-common.dtsi"
+
+/*
+ * I2C0 and LED8/9 share the same pins use the below
+ * macro to choose (and set approopriate DIP switches).
+ */
+#define I2C0 1
+#define LED8 (!I2C0)
+#define LED9 (!I2C0)
+
+/ {
+ model = "Renesas RZ/N2H EVK Board based on r9a09g087m44";
+ compatible = "renesas,rzn2h-evk", "renesas,r9a09g087m44", "renesas,r9a09g087";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-3 {
+ /* DSW18-7: ON, DSW18-8: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(31, 6) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <4>;
+ };
+
+ led-4 {
+ /* DSW18-9: ON, DSW18-10: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <5>;
+ };
+
+ led-5 {
+ /* DSW18-1: ON, DSW18-2: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(22, 7) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <6>;
+ };
+
+ led-6 {
+ /* DSW18-3: ON, DSW18-4: OFF */
+ gpios = <&pinctrl RZT2H_GPIO(23, 0) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <7>;
+ };
+
+ led-7 {
+ /*
+ * DSW18-5: ON, DSW18-6: OFF
+ * DSW19-3: OFF, DSW19-4: ON
+ */
+ gpios = <&pinctrl RZT2H_GPIO(14, 3) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <8>;
+ };
+
+#if LED8
+ led-8 {
+ /*
+ * USER_LED0
+ * DSW15-8: OFF, DSW15-9: OFF, DSW15-10: ON
+ */
+ gpios = <&pinctrl RZT2H_GPIO(14, 6) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <0>;
+ };
+#endif
+
+#if LED9
+ led-9 {
+ /*
+ * USER_LED1
+ * DSW15-5: OFF, DSW15-6: ON
+ */
+ gpios = <&pinctrl RZT2H_GPIO(14, 7) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ };
+#endif
+
+ led-10 {
+ /*
+ * USER_LED2
+ * DSW17-3: OFF, DSW17-4: ON
+ */
+ gpios = <&pinctrl RZT2H_GPIO(2, 7) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ };
+
+ led-11 {
+ /*
+ * USER_LED3
+ * DSW17-1: OFF, DSW17-2: ON
+ */
+ gpios = <&pinctrl RZT2H_GPIO(3, 0) GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <3>;
+ };
+ };
+};
+
+#if I2C0
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+#endif
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&pinctrl {
+ /*
+ * I2C0 Pin Configuration:
+ * ------------------------
+ * Signal | Pin | DSW15
+ * -------|---------|--------------
+ * SCL | P14_6 | 8: OFF, 9: ON, 10: OFF
+ * SDA | P14_7 | 5: ON, 6: OFF
+ */
+ i2c0_pins: i2c0-pins {
+ pinmux = <RZT2H_PORT_PINMUX(14, 6, 0x17)>,
+ <RZT2H_PORT_PINMUX(14, 7, 0x17)>;
+ };
+
+ /*
+ * I2C1 Pin Configuration:
+ * ------------------------
+ * Signal | Pin | DSW7
+ * -------|---------|--------------
+ * SCL | P03_3 | 1: ON, 2: OFF
+ * SDA | P03_4 | 3: ON, 4: OFF
+ */
+ i2c1_pins: i2c1-pins {
+ pinmux = <RZT2H_PORT_PINMUX(3, 3, 0x17)>,
+ <RZT2H_PORT_PINMUX(3, 4, 0x17)>;
+ };
+
+#if USB_OTG
+ usb-exicen-hog {
+ gpio-hog;
+ gpios = <RZT2H_GPIO(2, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb_exicen_a";
+ };
+#endif
+
+ usb_pins: usb-pins {
+ pinmux = <RZT2H_PORT_PINMUX(2, 2, 0x13)>, /* VBUSEN */
+ <RZT2H_PORT_PINMUX(2, 3, 0x13)>; /* OVRCUR */
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi
new file mode 100644
index 0000000..ef0343b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H 4-core SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g087.dtsi"
+
+/ {
+ compatible = "renesas,r9a09g087m44", "renesas,r9a09g087";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 345b779e..f3d7eff 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -48,7 +48,10 @@ sound_card {
#if (SW_SCIF_CAN || SW_RSPI_CAN)
&canfd {
pinctrl-0 = <&can1_pins>;
- /delete-node/ channel@0;
+
+ channel0 {
+ status = "disabled";
+ };
};
#else
&canfd {
diff --git a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
new file mode 100644
index 0000000..5c91002
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Common Device Tree Source for the RZ/T2H and RZ/N2H EVK boards.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhi0;
+ mmc1 = &sdhi1;
+ serial0 = &sci0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+#if SD0_SD
+ vqmmc_sdhi0: regulator-vqmmc-sdhi0 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI0 VqmmC";
+ gpios = <&pinctrl RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios-states = <0>;
+ states = <3300000 0>, <1800000 1>;
+ };
+#endif
+
+#if SD1_MICRO_SD
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pinctrl RZT2H_GPIO(8, 6) GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <3300000 0>, <1800000 1>;
+ };
+#endif
+};
+
+&ehci {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <25000000>;
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c0 {
+ eeprom: eeprom@50 {
+ compatible = "renesas,r1ex24016", "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&ohci {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&pinctrl {
+ /*
+ * SCI0 Pin Configuration:
+ * ------------------------
+ * Signal | Pin | RZ/T2H (SW4) | RZ/N2H (DSW9)
+ * -----------|---------|--------------|---------------
+ * SCI0_RXD | P27_4 | 5: ON, 6: OFF| 1: ON, 2: OFF
+ * SCI0_TXD | P27_5 | 7: ON, 8: OFF| 3: ON, 4: OFF
+ */
+ sci0_pins: sci0-pins {
+ pinmux = <RZT2H_PORT_PINMUX(27, 4, 0x14)>,
+ <RZT2H_PORT_PINMUX(27, 5, 0x14)>;
+ };
+
+#if SD0_EMMC
+ sdhi0-emmc-iovs-hog {
+ gpio-hog;
+ gpios = <RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SD0_IOVS";
+ };
+#endif
+
+ sdhi0_emmc_pins: sd0-emmc-group {
+ data-pins {
+ pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
+ <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
+ <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
+ <RZT2H_PORT_PINMUX(12, 5, 0x29)>, /* SD0_DATA3 */
+ <RZT2H_PORT_PINMUX(12, 6, 0x29)>, /* SD0_DATA4 */
+ <RZT2H_PORT_PINMUX(12, 7, 0x29)>, /* SD0_DATA5 */
+ <RZT2H_PORT_PINMUX(13, 0, 0x29)>, /* SD0_DATA6 */
+ <RZT2H_PORT_PINMUX(13, 1, 0x29)>; /* SD0_DATA7 */
+ };
+
+ ctrl-pins {
+ pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+ <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
+ <RZT2H_PORT_PINMUX(13, 2, 0x29)>; /* SD0_RST# */
+ };
+ };
+
+#if SD0_SD
+ sdhi0-pwen-hog {
+ gpio-hog;
+ gpios = <RZT2H_GPIO(2, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SD0_PWEN";
+ };
+#endif
+
+ sdhi0_sd_pins: sd0-sd-group {
+ data-pins {
+ pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
+ <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
+ <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
+ <RZT2H_PORT_PINMUX(12, 5, 0x29)>; /* SD0_DATA3 */
+ };
+
+ ctrl-pins {
+ pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+ <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
+ <RZT2H_PORT_PINMUX(22, 5, 0x29)>, /* SD0_CD */
+ <RZT2H_PORT_PINMUX(22, 6, 0x29)>; /* SD0_WP */
+ };
+ };
+
+#if SD1_MICRO_SD
+ sdhi1-pwen-hog {
+ gpio-hog;
+ gpios = <RZT2H_GPIO(8, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SD1_PWEN";
+ };
+#endif
+
+ sdhi1_pins: sd1-group {
+ data-pins {
+ pinmux = <RZT2H_PORT_PINMUX(16, 7, 0x29)>, /* SD1_DATA0 */
+ <RZT2H_PORT_PINMUX(17, 0, 0x29)>, /* SD1_DATA1 */
+ <RZT2H_PORT_PINMUX(17, 1, 0x29)>, /* SD1_DATA2 */
+ <RZT2H_PORT_PINMUX(17, 2, 0x29)>; /* SD1_DATA3 */
+ };
+
+ ctrl-pins {
+ pinmux = <RZT2H_PORT_PINMUX(16, 5, 0x29)>, /* SD1_CLK */
+ <RZT2H_PORT_PINMUX(16, 6, 0x29)>, /* SD1_CMD */
+ <RZT2H_PORT_PINMUX(17, 4, 0x29)>; /* SD1_CD */
+ };
+ };
+};
+
+&sci0 {
+ pinctrl-0 = <&sci0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+#if SD0_EMMC
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_emmc_pins>;
+ pinctrl-1 = <&sdhi0_emmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ mmc-hs200-1_8v;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
+#endif
+
+#if SD0_SD
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_sd_pins>;
+ pinctrl-1 = <&sdhi0_sd_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vqmmc_sdhi0>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+#endif
+
+#if SD1_MICRO_SD
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+#endif
+
+&usb2_phy {
+ pinctrl-0 = <&usb_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&wdt2 {
+ status = "okay";
+ timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 0995209..ad684e3 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -89,7 +89,11 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-nanopi-zero2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2f.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-d.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-s.dtb
@@ -130,6 +134,8 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-hinlink-h66k.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-hinlink-h68k.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mecsbc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
@@ -175,6 +181,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-ultra.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-roc-rt.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index f7c45788..30bdb38 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -58,6 +58,24 @@ ir-receiver {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
linux,rc-map-name = "rc-beelink-gs1";
};
+
+ spdif_dit: spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_sound: spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
};
&analog_sound {
@@ -325,6 +343,11 @@ &sdmmc {
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+};
+
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
@@ -358,6 +381,11 @@ &usb_host0_ehci {
status = "okay";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&vop {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
index 329d031..c0b7b98 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
@@ -44,10 +44,6 @@ &codec {
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
};
-&gpu {
- mali-supply = <&vdd_logic>;
-};
-
&pinctrl {
ir {
ir_int: ir-int {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
index b5bd5e7..7d62a3e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
@@ -84,6 +84,13 @@ vcc_phy: regulator-vcc-phy {
regulator-boot-on;
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
leds {
compatible = "gpio-leds";
@@ -160,6 +167,10 @@ &gmac2io {
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_logic>;
+};
+
&hdmi {
status = "okay";
};
@@ -300,6 +311,12 @@ &io_domains {
};
&pinctrl {
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 5367e5f..592fd8c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -152,6 +152,10 @@ &gmac2io {
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_logic>;
+};
+
&hdmi {
avdd-0v9-supply = <&vdd_10>;
avdd-1v8-supply = <&vcc_18>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 6438c96..283d9cb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -331,6 +331,11 @@ power: power-controller {
#address-cells = <1>;
#size-cells = <0>;
+ power-domain@RK3328_PD_GPU {
+ reg = <RK3328_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ #power-domain-cells = <0>;
+ };
power-domain@RK3328_PD_HEVC {
reg = <RK3328_PD_HEVC>;
clocks = <&cru SCLK_VENC_CORE>;
@@ -570,9 +575,13 @@ map0 {
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <4096>;
};
+ map1 {
+ trip = <&target>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
};
};
-
};
tsadc: tsadc@ff250000 {
@@ -651,7 +660,36 @@ gpu: gpu@ff300000 {
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ power-domains = <&power RK3328_PD_GPU>;
resets = <&cru SRST_GPU_A>;
+ #cooling-cells = <2>;
+ };
+
+ gpu_opp_table: opp-table-gpu {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1075000>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1075000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1075000>;
+ };
+
+ opp-500000000 {
+ /* causes stability issues */
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1150000>;
+ status = "disabled";
+ };
};
h265e_mmu: iommu@ff330200 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index b33a150..eaaca08 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -883,6 +883,12 @@ vcc5v0_host_en_pin: vcc5v0-host-en-pin {
};
};
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
wireless-bluetooth {
bt_wake_pin: bt-wake-pin {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -940,7 +946,19 @@ &sdio0 {
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
};
&sdhci {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 6f97e57..2dca1dc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -689,6 +689,12 @@ vcc1v8_codec_en: vcc1v8-codec-en {
};
};
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
wireless-bluetooth {
bt_wake_pin: bt-wake-pin {
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -715,7 +721,19 @@ &sdio0 {
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PD0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
};
&pwm0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
new file mode 100644
index 0000000..6e21579
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+ model = "ArmSoM Sige1";
+ compatible = "armsom,sige1", "rockchip,rk3528";
+
+ aliases {
+ ethernet0 = &gmac1;
+ i2c0 = &i2c0;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio0;
+ serial0 = &uart0;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "MASKROM";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&g_led>, <&r_led>;
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ vcc0v6_ddr: regulator-0v6-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc0v6_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_0v9: regulator-0v9-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: regulator-1v1-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc1v8_ddr: regulator-1v8-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_3v3: regulator-3v3-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_dcin>;
+ };
+
+ vcc3v3_sd: regulator-3v3-vcc-sd {
+ compatible = "regulator-fixed";
+ gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwren_l>;
+ regulator-name = "vcc3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_dcin>;
+ };
+
+ vcc5v0_usb1_host: regulator-5v0-vcc-usb1-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host1_drv_h>;
+ regulator-name = "vcc5v0_usb1_host";
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host2_drv_h>;
+ regulator-name = "vcc5v0_usb2_host";
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_otg0_drv_h>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_dcin: regulator-vcc-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vccio_sd: regulator-vccio-sd {
+ compatible = "regulator-gpio";
+ gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <1800000 0x0>, <3300000 0x1>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_arm: regulator-vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm3 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <746000>;
+ regulator-max-microvolt = <1201000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ vdd_logic: regulator-vdd-logic {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <705000>;
+ regulator-max-microvolt = <1006000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>, <&clkm1_32k_out>;
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+ <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m0_xfer>;
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int_l>;
+ wakeup-source;
+ };
+};
+
+&mdio1 {
+ rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rstn_l>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ bluetooth {
+ bt_reg_on_h: bt-reg-on-h {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_h: bt-wake-host-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt_h: host-wake-bt-h {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ethernet {
+ gmac1_rstn_l: gmac1-rstn-l {
+ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ g_led: g-led {
+ rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ r_led: r-led {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtc {
+ rtc_int_l: rtc-int-l {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sdmmc_pwren_l: sdmmc-pwren-l {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb20_host1_drv_h: usb20-host1-drv-h {
+ rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb20_host2_drv_h: usb20-host2-drv-h {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb20_otg0_drv_h: usb20-otg0-drv-h {
+ rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host_h: wifi-wake-host-h {
+ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m0_pins>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3m0_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ clocks = <&cru CLK_DEEPSLOW>;
+ clock-names = "lpo";
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_wake_host_h>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "okay";
+};
+
+&uart2 {
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>, <&uart2m1_ctsn>, <&uart2m1_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&cru CLK_DEEPSLOW>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on_h>, <&bt_wake_host_h>, <&host_wake_bt_h>;
+ shutdown-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc_3v3>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
new file mode 100644
index 0000000..9f68303
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi Zero2";
+ compatible = "friendlyarm,nanopi-zero2", "rockchip,rk3528";
+
+ aliases {
+ ethernet0 = &gmac1;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc-keys-0 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "MASK";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ adc-keys-1 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "RECOVERY";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led1>, <&led_sys>;
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ vcc0v6_ddr: regulator-0v6-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc0v6_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_0v9: regulator-0v9-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: regulator-1v1-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-3v3-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sd: regulator-3v3-vcc-sd {
+ compatible = "regulator-fixed";
+ gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwren_l>;
+ regulator-name = "vcc3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ usb2_host_5v: regulator-5v0-usb2-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host1_pwren>;
+ regulator-name = "usb2_host_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vccio_sd: regulator-vccio-sd {
+ compatible = "regulator-gpio";
+ gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <1800000 0x0>, <3300000 0x1>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_arm: regulator-vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <746000>;
+ regulator-max-microvolt = <1201000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ vdd_logic: regulator-vdd-logic {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <705000>;
+ regulator-max-microvolt = <1006000>;
+ regulator-settling-time-up-us = <250>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+ <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m0_xfer>;
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int_l>;
+ wakeup-source;
+ };
+};
+
+&mdio1 {
+ rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rstn_l>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ gmac1_rstn_l: gmac1-rstn-l {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led1: led1 {
+ rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ led_sys: led-sys {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtc {
+ rtc_int_l: rtc-int-l {
+ rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sdmmc_pwren_l: sdmmc-pwren-l {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb20_host1_pwren: usb20-host1-pwren {
+ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m0_pins>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m0_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi
new file mode 100644
index 0000000..aedc7ee
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+ aliases {
+ i2c1 = &i2c1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "MASKROM";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_led_b>;
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vdd_0v9: regulator-0v9-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: regulator-1v1-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-3v3-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_wifi: regulator-3v3-vcc-wifi {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_wifi_pwr>;
+ regulator-name = "vcc_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_usb20: regulator-5v0-vcc-usb20 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_en>;
+ regulator-name = "vcc5v0_usb20";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vccio_sd: regulator-vccio-sd {
+ compatible = "regulator-gpio";
+ gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <1800000 0x0>, <3300000 0x1>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_arm: regulator-vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <746000>;
+ regulator-max-microvolt = <1201000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ vdd_logic: regulator-vdd-logic {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <705000>;
+ regulator-max-microvolt = <1006000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ rfkill {
+ compatible = "rfkill-gpio";
+ label = "rfkill-wlan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ radio-type = "wlan";
+ shutdown-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m0_xfer>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "belling,bl24c16a", "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ read-only;
+ vcc-supply = <&vcc_3v3>;
+ };
+};
+
+&pinctrl {
+ bluetooth {
+ bt_wake_host_h: bt-wake-host-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt_h: host-wake-bt-h {
+ rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ state_led_b: state-led-b {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_host_en: usb-host-en {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ usb_wifi_pwr: usb-wifi-pwr {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host_h: wifi-wake-host-h {
+ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m0_pins>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m0_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <100000000>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts
new file mode 100644
index 0000000..c03ae1d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3528-rock-2.dtsi"
+
+/ {
+ model = "Radxa ROCK 2A";
+ compatible = "radxa,rock-2a", "rockchip,rk3528";
+
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
+ vcc5v0_usb30_otg: regulator-5v0-vcc-usb30-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_en>;
+ regulator-name = "vcc5v0_usb30_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+ <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+ status = "okay";
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_led_b>, <&sys_led_g>;
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+};
+
+&mdio1 {
+ rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rstn_l>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ gmac1_rstn_l: gmac1-rstn-l {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ sys_led_g: sys-led-g {
+ rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb_otg_en: usb-otg-en {
+ rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts
new file mode 100644
index 0000000..3e2b9b6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3528-rock-2.dtsi"
+
+/ {
+ model = "Radxa ROCK 2F";
+ compatible = "radxa,rock-2f", "rockchip,rk3528";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index 001a555..d5f8f7b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rockchip,rk3528-cru.h>
+#include <dt-bindings/power/rockchip,rk3528-power.h>
#include <dt-bindings/reset/rockchip,rk3528-cru.h>
/ {
@@ -53,6 +54,7 @@ cpu0: cpu@0 {
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_clk SCMI_CLK_CPU>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu1: cpu@1 {
@@ -61,6 +63,7 @@ cpu1: cpu@1 {
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_clk SCMI_CLK_CPU>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu2: cpu@2 {
@@ -69,6 +72,7 @@ cpu2: cpu@2 {
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_clk SCMI_CLK_CPU>;
+ operating-points-v2 = <&cpu_opp_table>;
};
cpu3: cpu@3 {
@@ -77,6 +81,7 @@ cpu3: cpu@3 {
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_clk SCMI_CLK_CPU>;
+ operating-points-v2 = <&cpu_opp_table>;
};
};
@@ -95,6 +100,41 @@ scmi_clk: protocol@14 {
};
};
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <875000 875000 1100000>;
+ clock-latency-ns = <40000>;
+ };
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <925000 925000 1100000>;
+ clock-latency-ns = <40000>;
+ };
+
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <975000 975000 1100000>;
+ clock-latency-ns = <40000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1037500 1037500 1100000>;
+ clock-latency-ns = <40000>;
+ };
+
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-microvolt = <1100000 1100000 1100000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
@@ -154,6 +194,7 @@ gpio1: gpio@ffaf0000 {
gpio-ranges = <&pinctrl 0 32 32>;
interrupt-controller;
#interrupt-cells = <2>;
+ power-domains = <&power RK3528_PD_VPU>;
};
gpio2: gpio@ffb00000 {
@@ -166,6 +207,7 @@ gpio2: gpio@ffb00000 {
gpio-ranges = <&pinctrl 0 64 32>;
interrupt-controller;
#interrupt-cells = <2>;
+ power-domains = <&power RK3528_PD_VO>;
};
gpio3: gpio@ffb10000 {
@@ -178,6 +220,7 @@ gpio3: gpio@ffb10000 {
gpio-ranges = <&pinctrl 0 96 32>;
interrupt-controller;
#interrupt-cells = <2>;
+ power-domains = <&power RK3528_PD_VPU>;
};
gpio4: gpio@ffb20000 {
@@ -190,6 +233,7 @@ gpio4: gpio@ffb20000 {
gpio-ranges = <&pinctrl 0 128 32>;
interrupt-controller;
#interrupt-cells = <2>;
+ power-domains = <&power RK3528_PD_RKVENC>;
};
};
@@ -416,6 +460,11 @@ vpu_grf: syscon@ff340000 {
reg = <0x0 0xff340000 0x0 0x8000>;
};
+ pipe_phy_grf: syscon@ff348000 {
+ compatible = "rockchip,rk3528-pipe-phy-grf", "syscon";
+ reg = <0x0 0xff348000 0x0 0x8000>;
+ };
+
vo_grf: syscon@ff360000 {
compatible = "rockchip,rk3528-vo-grf", "syscon";
reg = <0x0 0xff360000 0x0 0x10000>;
@@ -480,8 +529,8 @@ power: power-controller {
#size-cells = <0>;
/* These power domains are grouped by VD_GPU */
- power-domain@4 {
- reg = <4>;
+ power-domain@RK3528_PD_GPU {
+ reg = <RK3528_PD_GPU>;
clocks = <&cru ACLK_GPU_MALI>,
<&cru PCLK_GPU_ROOT>;
pm_qos = <&qos_gpu_m0>,
@@ -490,20 +539,19 @@ power-domain@4 {
};
/* These power domains are grouped by VD_LOGIC */
- power-domain@5 {
- reg = <5>;
+ power-domain@RK3528_PD_RKVDEC {
+ reg = <RK3528_PD_RKVDEC>;
pm_qos = <&qos_rkvdec>;
#power-domain-cells = <0>;
status = "disabled";
};
- power-domain@6 {
- reg = <6>;
+ power-domain@RK3528_PD_RKVENC {
+ reg = <RK3528_PD_RKVENC>;
pm_qos = <&qos_rkvenc>;
#power-domain-cells = <0>;
- status = "disabled";
};
- power-domain@7 {
- reg = <7>;
+ power-domain@RK3528_PD_VO {
+ reg = <RK3528_PD_VO>;
pm_qos = <&qos_gmac0>,
<&qos_hdcp>,
<&qos_jpegdec>,
@@ -514,10 +562,9 @@ power-domain@7 {
<&qos_vdpp>,
<&qos_vop>;
#power-domain-cells = <0>;
- status = "disabled";
};
- power-domain@8 {
- reg = <8>;
+ power-domain@RK3528_PD_VPU {
+ reg = <RK3528_PD_VPU>;
pm_qos = <&qos_emmc>,
<&qos_fspi>,
<&qos_gmac1>,
@@ -528,7 +575,6 @@ power-domain@8 {
<&qos_usb3otg>,
<&qos_vpu>;
#power-domain-cells = <0>;
- status = "disabled";
};
};
};
@@ -556,7 +602,7 @@ gpu: gpu@ff700000 {
"pp1",
"ppmmu1";
operating-points-v2 = <&gpu_opp_table>;
- power-domains = <&power 4>;
+ power-domains = <&power RK3528_PD_GPU>;
resets = <&cru SRST_A_GPU>;
status = "disabled";
};
@@ -570,6 +616,7 @@ spi0: spi@ff9c0000 {
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 25>, <&dmac 24>;
dma-names = "tx", "rx";
+ power-domains = <&power RK3528_PD_RKVENC>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -584,6 +631,7 @@ spi1: spi@ff9d0000 {
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 31>, <&dmac 30>;
dma-names = "tx", "rx";
+ power-domains = <&power RK3528_PD_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -608,6 +656,7 @@ uart1: serial@ff9f8000 {
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 11>, <&dmac 10>;
+ power-domains = <&power RK3528_PD_RKVENC>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
@@ -620,6 +669,7 @@ uart2: serial@ffa00000 {
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 13>, <&dmac 12>;
+ power-domains = <&power RK3528_PD_VPU>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
@@ -632,6 +682,7 @@ uart3: serial@ffa08000 {
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 15>, <&dmac 14>;
+ power-domains = <&power RK3528_PD_RKVENC>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
@@ -644,6 +695,7 @@ uart4: serial@ffa10000 {
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 17>, <&dmac 16>;
+ power-domains = <&power RK3528_PD_VO>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
@@ -656,6 +708,7 @@ uart5: serial@ffa18000 {
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 19>, <&dmac 18>;
+ power-domains = <&power RK3528_PD_VPU>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
@@ -668,6 +721,7 @@ uart6: serial@ffa20000 {
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 21>, <&dmac 20>;
+ power-domains = <&power RK3528_PD_VPU>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
@@ -680,6 +734,7 @@ uart7: serial@ffa28000 {
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac 23>, <&dmac 22>;
+ power-domains = <&power RK3528_PD_VPU>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
@@ -692,6 +747,7 @@ i2c0: i2c@ffa50000 {
clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&power RK3528_PD_RKVENC>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -704,6 +760,7 @@ i2c1: i2c@ffa58000 {
clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&power RK3528_PD_RKVENC>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -730,6 +787,7 @@ i2c3: i2c@ffa68000 {
clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&power RK3528_PD_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -744,6 +802,7 @@ i2c4: i2c@ffa70000 {
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_xfer>;
+ power-domains = <&power RK3528_PD_VO>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -756,6 +815,7 @@ i2c5: i2c@ffa78000 {
clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&power RK3528_PD_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -768,6 +828,7 @@ i2c6: i2c@ffa80000 {
clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&power RK3528_PD_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -782,6 +843,7 @@ i2c7: i2c@ffa88000 {
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_xfer>;
+ power-domains = <&power RK3528_PD_VO>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -873,6 +935,7 @@ saradc: adc@ffae0000 {
clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&power RK3528_PD_VPU>;
resets = <&cru SRST_P_SARADC>;
reset-names = "saradc-apb";
#io-channel-cells = <1>;
@@ -893,6 +956,7 @@ gmac0: ethernet@ffbd0000 {
interrupt-names = "macirq", "eth_wake_irq";
phy-handle = <&rmii0_phy>;
phy-mode = "rmii";
+ power-domains = <&power RK3528_PD_VO>;
resets = <&cru SRST_A_MAC_VO>;
reset-names = "stmmaceth";
rockchip,grf = <&vo_grf>;
@@ -951,6 +1015,7 @@ gmac1: ethernet@ffbe0000 {
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
+ power-domains = <&power RK3528_PD_VPU>;
resets = <&cru SRST_A_MAC>;
reset-names = "stmmaceth";
rockchip,grf = <&vpu_grf>;
@@ -1001,6 +1066,7 @@ sdhci: mmc@ffbf0000 {
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
<&emmc_strb>;
+ power-domains = <&power RK3528_PD_VPU>;
resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
<&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
<&cru SRST_T_EMMC>;
@@ -1022,6 +1088,7 @@ sdio0: mmc@ffc10000 {
max-frequency = <200000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_clk>, <&sdio0_cmd>;
+ power-domains = <&power RK3528_PD_VPU>;
resets = <&cru SRST_H_SDIO0>;
reset-names = "reset";
status = "disabled";
@@ -1041,6 +1108,7 @@ sdio1: mmc@ffc20000 {
max-frequency = <200000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdio1_bus4>, <&sdio1_clk>, <&sdio1_cmd>;
+ power-domains = <&power RK3528_PD_VPU>;
resets = <&cru SRST_H_SDIO1>;
reset-names = "reset";
status = "disabled";
@@ -1061,6 +1129,7 @@ sdmmc: mmc@ffc30000 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>,
<&sdmmc_det>;
+ power-domains = <&power RK3528_PD_VO>;
resets = <&cru SRST_H_SDMMC0>;
reset-names = "reset";
rockchip,default-sample-phase = <90>;
@@ -1084,6 +1153,25 @@ dmac: dma-controller@ffd60000 {
#dma-cells = <1>;
arm,pl330-periph-burst;
};
+
+ combphy: phy@ffdc0000 {
+ compatible = "rockchip,rk3528-naneng-combphy";
+ reg = <0x0 0xffdc0000 0x0 0x10000>;
+ assigned-clocks = <&cru CLK_REF_PCIE_INNER_PHY>;
+ assigned-clock-rates = <100000000>;
+ clocks = <&cru CLK_REF_PCIE_INNER_PHY>,
+ <&cru PCLK_PCIE_PHY>,
+ <&cru PCLK_PIPE_GRF>;
+ clock-names = "ref", "apb", "pipe";
+ power-domains = <&power RK3528_PD_VPU>;
+ resets = <&cru SRST_PCIE_PIPE_PHY>,
+ <&cru SRST_P_PCIE_PHY>;
+ reset-names = "phy", "apb";
+ #phy-cells = <1>;
+ rockchip,pipe-grf = <&vpu_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy_grf>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts
new file mode 100644
index 0000000..bc51123
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3568-hinlink-opc.dtsi"
+
+/ {
+ model = "HINLINK H66K";
+ compatible = "hinlink,h66k", "rockchip,rk3568";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts
new file mode 100644
index 0000000..793ee65
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3568-hinlink-opc.dtsi"
+
+/ {
+ model = "HINLINK H68K";
+ compatible = "hinlink,h68k", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ };
+};
+
+&gmac0 {
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+ assigned-clock-rates = <0>, <125000000>;
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy0>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc3v3_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus
+ &gmac0_rstn>;
+ status = "okay";
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+ assigned-clock-rates = <0>, <125000000>;
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc3v3_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_rgmii_bus
+ &gmac1_rstn>;
+ status = "okay";
+};
+
+&mdio0 {
+ rgmii_phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ gmac {
+ gmac0_rstn: gmac0-rstn {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ gmac1_rstn: gmac1-rstn {
+ rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi
new file mode 100644
index 0000000..14f3839
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_ir_m0>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&factory>;
+
+ button-factory {
+ label = "factory";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <50>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&green_led>, <&red_led>, <&work_led>;
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "netdev";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ vcc0v9_2g5: regulator-0v9-vcc-2g5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc0v9_2g5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc12v_dcinp: regulator-12v-vcc-dcinp {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcinp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_pi6c_05: regulator-3v3-vcc-pi6c-05 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan_power_en>;
+ regulator-name = "vcc3v3_pi6c_05";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sd: regulator-3v3-vcc-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pwren>;
+ regulator-name = "vcc3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: regulator-3v3-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcinp>;
+ };
+
+ vcc5v0_usb30_otg0: regulator-5v0-vcc-usb30-otg0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_power_en>;
+ regulator-name = "vcc5v0_usb30_otg0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy0 {
+ status = "okay";
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ #clock-cells = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3: SWITCH_REG2 {
+ regulator-name = "vcc3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2m1_xfer>;
+ status = "okay";
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_perstn>;
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+ status = "okay";
+};
+
+&pcie30phy {
+ data-lanes = <1 2>;
+ status = "okay";
+};
+
+&pcie3x1 {
+ num-lanes = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan_resetb>;
+ reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+ status = "okay";
+};
+
+&pcie3x2 {
+ num-lanes = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan_reseta>;
+ reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+ status = "okay";
+};
+
+&pinctrl {
+ keys {
+ factory: factory {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ green_led: green-led {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ red_led: red-led {
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led: work-led {
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir {
+ pwm3_ir_m0: pwm3-ir-m0 {
+ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ mmc {
+ sd_pwren: sd-pwren {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ lan_power_en: lan-power-en {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ lan_reseta: lan-reseta {
+ rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ lan_resetb: lan-resetb {
+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_perstn: wifi-perstn {
+ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ usb_power_en: usb-power-en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+/* Via Type-C adapter */
+&sata0 {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr50;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb30_otg0>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ phy-supply = <&vcc5v0_usb30_otg0>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb30_otg0>;
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
index 56527c5..db8fef7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
@@ -232,6 +232,20 @@ vcc_ufs_s0: regulator-vcc-ufs-s0 {
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sys>;
};
+
+ vcc_wifi_reg_on: regulator-wifi-reg-on {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&wifi_reg_on>;
+ pinctrl-names = "default";
+ regulator-name = "wifi_reg_on";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_s3>;
+ };
};
&cpu_l0 {
@@ -242,6 +256,10 @@ &cpu_b0 {
cpu-supply = <&vdd_cpu_big_s0>;
};
+&combphy0_ps {
+ status = "okay";
+};
+
&combphy1_psu {
status = "okay";
};
@@ -257,9 +275,6 @@ ð0m0_rx_bus2
ð0m0_rgmii_clk
ð0m0_rgmii_bus
ðm0_clk0_25m_out>;
- snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x21>;
status = "okay";
};
@@ -275,9 +290,6 @@ ð1m0_rx_bus2
ð1m0_rgmii_clk
ð1m0_rgmii_bus
ðm0_clk1_25m_out>;
- snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x20>;
status = "okay";
};
@@ -680,19 +692,73 @@ regulator-state-mem {
};
};
+&i2c2 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int>;
+ wakeup-source;
+ #clock-cells = <0>;
+ };
+};
+
&mdio0 {
- rgmii_phy0: phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
+ rgmii_phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
reg = <0x1>;
clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+ assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+ assigned-clock-rates = <25000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_phy0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
};
};
&mdio1 {
- rgmii_phy1: phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
reg = <0x1>;
clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+ assigned-clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+ assigned-clock-rates = <25000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_phy1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_rst>;
+ reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_s3>;
+ status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0 0 0 0 0>;
+ bus-range = <0x0 0xf>;
+ device_type = "pci";
+ ranges;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi: wifi@0,0 {
+ compatible = "pci14e4,449d";
+ reg = <0x10000 0 0 0 0>;
+ clocks = <&hym8563>;
+ clock-names = "lpo";
+ };
};
};
@@ -708,6 +774,42 @@ &pcie1 {
};
&pinctrl {
+ bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ hym8563 {
+ rtc_int: rtc-int {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ network {
+ rgmii_phy0_rst: rgmii-phy0-rst {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ rgmii_phy1_rst: rgmii-phy1-rst {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie0 {
+ pcie0_rst: pcie0-rst {
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb {
usb_host_pwren: usb-host-pwren {
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -721,6 +823,28 @@ usbc0_int: usbc0-int {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ wifi {
+ wifi_reg_on: wifi-reg-on {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ wifi_wake_host: wifi-wake-host {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ full-pwr-cycle-in-suspend;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
};
&sdmmc {
@@ -763,6 +887,27 @@ &uart0 {
status = "okay";
};
+&uart4 {
+ pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&hym8563>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+ pinctrl-names = "default";
+ shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc_3v3_s3>;
+ vddio-supply = <&vcc_1v8_s3>;
+ };
+};
+
&ufshc {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
index d4e437e..d0ab1d1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
@@ -107,6 +107,18 @@ vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
vin-supply = <&vcc_1v8_s3>;
};
+ vcc3v3_lcd_s0: regulator-vcc3v3-lcd-s0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwren_h>;
+ regulator-name = "vcc3v3-lcd-s0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
vcc3v3_pcie: regulator-vcc3v3-pcie {
compatible = "regulator-fixed";
enable-active-high;
@@ -715,6 +727,10 @@ rtc_int_l: rtc-int-l {
};
power {
+ lcd_pwren_h: lcd-pwren-h {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
vcc5vd_en: vcc5vd-en {
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index c3cdae8..fc4e9e0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/power/rockchip,rk3576-power.h>
#include <dt-bindings/reset/rockchip,rk3576-cru.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,rk3576";
@@ -113,9 +114,9 @@ cpu_l0: cpu@0 {
capacity-dmips-mhz = <485>;
clocks = <&scmi_clk SCMI_ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
- #cooling-cells = <2>;
dynamic-power-coefficient = <120>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_l1: cpu@1 {
@@ -127,6 +128,7 @@ cpu_l1: cpu@1 {
clocks = <&scmi_clk SCMI_ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_l2: cpu@2 {
@@ -138,6 +140,7 @@ cpu_l2: cpu@2 {
clocks = <&scmi_clk SCMI_ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_l3: cpu@3 {
@@ -149,6 +152,7 @@ cpu_l3: cpu@3 {
clocks = <&scmi_clk SCMI_ARMCLK_L>;
operating-points-v2 = <&cluster0_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b0: cpu@100 {
@@ -159,9 +163,9 @@ cpu_b0: cpu@100 {
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
- #cooling-cells = <2>;
dynamic-power-coefficient = <320>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b1: cpu@101 {
@@ -173,6 +177,7 @@ cpu_b1: cpu@101 {
clocks = <&scmi_clk SCMI_ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b2: cpu@102 {
@@ -184,6 +189,7 @@ cpu_b2: cpu@102 {
clocks = <&scmi_clk SCMI_ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
cpu_b3: cpu@103 {
@@ -195,6 +201,7 @@ cpu_b3: cpu@103 {
clocks = <&scmi_clk SCMI_ARMCLK_B>;
operating-points-v2 = <&cluster1_opp_table>;
cpu-idle-states = <&CPU_SLEEP>;
+ #cooling-cells = <2>;
};
idle-states {
@@ -520,6 +527,143 @@ psci {
method = "smc";
};
+ thermal_zones: thermal-zones {
+ /* sensor near the center of the SoC */
+ package_thermal: package-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ package_crit: package-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* sensor for cluster1 (big Cortex-A72 cores) */
+ bigcore_thermal: bigcore-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ bigcore_alert: bigcore-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ bigcore_crit: bigcore-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&bigcore_alert>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor for cluster0 (little Cortex-A53 cores) */
+ littlecore_thermal: littlecore-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 2>;
+
+ trips {
+ littlecore_alert: littlecore-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ littlecore_crit: littlecore-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&littlecore_alert>;
+ cooling-device =
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 3>;
+
+ trips {
+ gpu_alert: gpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu_crit: gpu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ npu_thermal: npu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 4>;
+
+ trips {
+ npu_crit: npu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr_thermal: ddr-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 5>;
+
+ trips {
+ ddr_crit: ddr-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -822,6 +966,12 @@ hdptxphy_grf: syscon@26032000 {
reg = <0x0 0x26032000 0x0 0x100>;
};
+ mipidcphy_grf: syscon@26034000 {
+ compatible = "rockchip,rk3576-dcphy-grf", "syscon";
+ reg = <0x0 0x26034000 0x0 0x2000>;
+ clocks = <&cru PCLK_PMUPHY_ROOT>;
+ };
+
vo1_grf: syscon@26036000 {
compatible = "rockchip,rk3576-vo1-grf", "syscon";
reg = <0x0 0x26036000 0x0 0x100>;
@@ -1239,6 +1389,34 @@ sai6: sai@27d50000 {
status = "disabled";
};
+ dsi: dsi@27d80000 {
+ compatible = "rockchip,rk3576-mipi-dsi2";
+ reg = <0x0 0x27d80000 0x0 0x10000>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+ clock-names = "pclk", "sys";
+ power-domains = <&power RK3576_PD_VO0>;
+ resets = <&cru SRST_P_DSIHOST0>;
+ reset-names = "apb";
+ phys = <&mipidcphy PHY_TYPE_DPHY>;
+ phy-names = "dcphy";
+ rockchip,grf = <&vo0_grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi_in: port@0 {
+ reg = <0>;
+ };
+
+ dsi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi: hdmi@27da0000 {
compatible = "rockchip,rk3576-dw-hdmi-qp";
reg = <0x0 0x27da0000 0x0 0x20000>;
@@ -1793,6 +1971,30 @@ gpu_leakage: gpu-leakage@21 {
log_leakage: log-leakage@22 {
reg = <0x22 0x1>;
};
+ bigcore_tsadc_trim: bigcore-tsadc-trim@24 {
+ reg = <0x24 0x2>;
+ bits = <0 10>;
+ };
+ litcore_tsadc_trim: litcore-tsadc-trim@26 {
+ reg = <0x26 0x2>;
+ bits = <0 10>;
+ };
+ ddr_tsadc_trim: ddr-tsadc-trim@28 {
+ reg = <0x28 0x2>;
+ bits = <0 10>;
+ };
+ npu_tsadc_trim: npu-tsadc-trim@2a {
+ reg = <0x2a 0x2>;
+ bits = <0 10>;
+ };
+ gpu_tsadc_trim: gpu-tsadc-trim@2c {
+ reg = <0x2c 0x2>;
+ bits = <0 10>;
+ };
+ soc_tsadc_trim: soc-tsadc-trim@64 {
+ reg = <0x64 0x2>;
+ bits = <0 10>;
+ };
};
sai0: sai@2a600000 {
@@ -2073,7 +2275,6 @@ wdt: watchdog@2ace0000 {
clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
clock-names = "tclk", "pclk";
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
};
spi0: spi@2acf0000 {
@@ -2303,6 +2504,55 @@ saradc: adc@2ae00000 {
status = "disabled";
};
+ tsadc: tsadc@2ae70000 {
+ compatible = "rockchip,rk3576-tsadc";
+ reg = <0x0 0x2ae70000 0x0 0x400>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ assigned-clocks = <&cru CLK_TSADC>;
+ assigned-clock-rates = <2000000>;
+ resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb", "tsadc";
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <120000>;
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@0 {
+ reg = <0>;
+ nvmem-cells = <&soc_tsadc_trim>;
+ nvmem-cell-names = "trim";
+ };
+ sensor@1 {
+ reg = <1>;
+ nvmem-cells = <&bigcore_tsadc_trim>;
+ nvmem-cell-names = "trim";
+ };
+ sensor@2 {
+ reg = <2>;
+ nvmem-cells = <&litcore_tsadc_trim>;
+ nvmem-cell-names = "trim";
+ };
+ sensor@3 {
+ reg = <3>;
+ nvmem-cells = <&ddr_tsadc_trim>;
+ nvmem-cell-names = "trim";
+ };
+ sensor@4 {
+ reg = <4>;
+ nvmem-cells = <&npu_tsadc_trim>;
+ nvmem-cell-names = "trim";
+ };
+ sensor@5 {
+ reg = <5>;
+ nvmem-cells = <&gpu_tsadc_trim>;
+ nvmem-cell-names = "trim";
+ };
+ };
+
i2c9: i2c@2ae80000 {
compatible = "rockchip,rk3576-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0x2ae80000 0x0 0x1000>;
@@ -2346,6 +2596,22 @@ uart11: serial@2afd0000 {
status = "disabled";
};
+ mipidcphy: phy@2b020000 {
+ compatible = "rockchip,rk3576-mipi-dcphy";
+ reg = <0x0 0x2b020000 0x0 0x10000>;
+ clocks = <&cru PCLK_MIPI_DCPHY>,
+ <&cru CLK_PHY_REF_SRC>;
+ clock-names = "pclk", "ref";
+ resets = <&cru SRST_M_MIPI_DCPHY>,
+ <&cru SRST_P_MIPI_DCPHY>,
+ <&cru SRST_P_DCPHY_GRF>,
+ <&cru SRST_S_MIPI_DCPHY>;
+ reset-names = "m_phy", "apb", "grf", "s_phy";
+ rockchip,grf = <&mipidcphy_grf>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
combphy0_ps: phy@2b050000 {
compatible = "rockchip,rk3576-naneng-combphy";
reg = <0x0 0x2b050000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts b/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
index 431ff77..854c118 100644
--- a/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
@@ -42,7 +42,7 @@ button-0 {
keys-1 {
compatible = "gpio-keys";
pinctrl-names = "default";
- pinctrl-0 = <&btn_0>;
+ pinctrl-0 = <&pwm15_ir_m1>;
button-1 {
label = "User";
@@ -55,7 +55,7 @@ button-1 {
leds-0 {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&led_0>;
+ pinctrl-0 = <&power_led>;
led-0 {
color = <LED_COLOR_ID_GREEN>;
@@ -71,7 +71,7 @@ leds-1 {
led-1 {
color = <LED_COLOR_ID_GREEN>;
- default-state = "on";
+ default-state = "off";
function = LED_FUNCTION_LAN;
linux,default-trigger = "netdev";
pwms = <&pwm14 0 1000000 PWM_POLARITY_INVERTED>;
@@ -80,7 +80,7 @@ led-1 {
led-2 {
color = <LED_COLOR_ID_GREEN>;
- default-state = "on";
+ default-state = "off";
function = LED_FUNCTION_WAN;
linux,default-trigger = "netdev";
pwms = <&pwm11 0 1000000 PWM_POLARITY_INVERTED>;
@@ -98,16 +98,6 @@ vcc_1v1_nldo_s3: regulator-1v1 {
vin-supply = <&vcc_sysin>;
};
- vcc_3v3_pmu: regulator-3v3-0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_pmu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_s3>;
- };
-
vcc_3v3_s0: regulator-3v3-1 {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_s0";
@@ -312,13 +302,13 @@ &pcie2x1l2 {
&pinctrl {
keys {
- btn_0: button-0 {
+ pwm15_ir_m1: pwm15-ir-m1 {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
- led_0: led-0 {
+ power_led: power-led {
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -334,19 +324,19 @@ pcie20x1_2_perstn_m0: pcie-2 {
};
regulators {
- vcc_5v0_pwren_h: regulator-5v0-1 {
+ vcc_5v0_pwren_h: vcc-5v0-pwren-h {
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rtc {
- rtc_int_l: rtc-0 {
+ rtc_int_l: rtc-int-l {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
- usb_otg_pwren_h: regulator-5v0-0 {
+ usb_otg_pwren_h: usb-otg-pwren-h {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -538,7 +528,7 @@ regulator-state-mem {
};
};
- vcc_3v3_s3: dcdc-reg8 {
+ vcc_3v3_s3: vcc_3v3_pmu: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 70f03e6..e2500e3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -621,6 +621,16 @@ php_grf: syscon@fd5b0000 {
reg = <0x0 0xfd5b0000 0x0 0x1000>;
};
+ csidphy0_grf: syscon@fd5b4000 {
+ compatible = "rockchip,rk3588-csidphy-grf", "syscon";
+ reg = <0x0 0xfd5b4000 0x0 0x1000>;
+ };
+
+ csidphy1_grf: syscon@fd5b5000 {
+ compatible = "rockchip,rk3588-csidphy-grf", "syscon";
+ reg = <0x0 0xfd5b5000 0x0 0x1000>;
+ };
+
pipe_phy0_grf: syscon@fd5bc000 {
compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
reg = <0x0 0xfd5bc000 0x0 0x100>;
@@ -841,7 +851,7 @@ power: power-controller {
status = "okay";
/* These power domains are grouped by VD_NPU */
- power-domain@RK3588_PD_NPU {
+ pd_npu: power-domain@RK3588_PD_NPU {
reg = <RK3588_PD_NPU>;
#power-domain-cells = <0>;
#address-cells = <1>;
@@ -1140,6 +1150,97 @@ power-domain@RK3588_PD_SDMMC {
};
};
+ rknn_core_0: npu@fdab0000 {
+ compatible = "rockchip,rk3588-rknn-core";
+ reg = <0x0 0xfdab0000 0x0 0x1000>,
+ <0x0 0xfdab1000 0x0 0x1000>,
+ <0x0 0xfdab3000 0x0 0x1000>;
+ reg-names = "pc", "cna", "core";
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_NPU0>, <&cru HCLK_NPU0>,
+ <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+ clock-names = "aclk", "hclk", "npu", "pclk";
+ assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+ assigned-clock-rates = <200000000>;
+ resets = <&cru SRST_A_RKNN0>, <&cru SRST_H_RKNN0>;
+ reset-names = "srst_a", "srst_h";
+ power-domains = <&power RK3588_PD_NPUTOP>;
+ iommus = <&rknn_mmu_0>;
+ status = "disabled";
+ };
+
+ rknn_mmu_0: iommu@fdab9000 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdab9000 0x0 0x100>,
+ <0x0 0xfdaba000 0x0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_NPU0>, <&cru HCLK_NPU0>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3588_PD_NPUTOP>;
+ status = "disabled";
+ };
+
+ rknn_core_1: npu@fdac0000 {
+ compatible = "rockchip,rk3588-rknn-core";
+ reg = <0x0 0xfdac0000 0x0 0x1000>,
+ <0x0 0xfdac1000 0x0 0x1000>,
+ <0x0 0xfdac3000 0x0 0x1000>;
+ reg-names = "pc", "cna", "core";
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_NPU1>, <&cru HCLK_NPU1>,
+ <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+ clock-names = "aclk", "hclk", "npu", "pclk";
+ assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+ assigned-clock-rates = <200000000>;
+ resets = <&cru SRST_A_RKNN1>, <&cru SRST_H_RKNN1>;
+ reset-names = "srst_a", "srst_h";
+ power-domains = <&power RK3588_PD_NPU1>;
+ iommus = <&rknn_mmu_1>;
+ status = "disabled";
+ };
+
+ rknn_mmu_1: iommu@fdac9000 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdaca000 0x0 0x100>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_NPU1>, <&cru HCLK_NPU1>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3588_PD_NPU1>;
+ status = "disabled";
+ };
+
+ rknn_core_2: npu@fdad0000 {
+ compatible = "rockchip,rk3588-rknn-core";
+ reg = <0x0 0xfdad0000 0x0 0x1000>,
+ <0x0 0xfdad1000 0x0 0x1000>,
+ <0x0 0xfdad3000 0x0 0x1000>;
+ reg-names = "pc", "cna", "core";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_NPU2>, <&cru HCLK_NPU2>,
+ <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+ clock-names = "aclk", "hclk", "npu", "pclk";
+ assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+ assigned-clock-rates = <200000000>;
+ resets = <&cru SRST_A_RKNN2>, <&cru SRST_H_RKNN2>;
+ reset-names = "srst_a", "srst_h";
+ power-domains = <&power RK3588_PD_NPU2>;
+ iommus = <&rknn_mmu_2>;
+ status = "disabled";
+ };
+
+ rknn_mmu_2: iommu@fdad9000 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdada000 0x0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_NPU2>, <&cru HCLK_NPU2>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3588_PD_NPU2>;
+ status = "disabled";
+ };
+
vpu121: video-codec@fdb50000 {
compatible = "rockchip,rk3588-vpu121", "rockchip,rk3568-vpu";
reg = <0x0 0xfdb50000 0x0 0x800>;
@@ -1472,6 +1573,36 @@ dsi1_out: port@1 {
};
};
+ dp0: dp@fde50000 {
+ compatible = "rockchip,rk3588-dp";
+ reg = <0x0 0xfde50000 0x0 0x4000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru CLK_AUX16M_0>;
+ assigned-clock-rates = <16000000>;
+ clocks = <&cru PCLK_DP0>, <&cru CLK_AUX16M_0>,
+ <&cru CLK_DP0>, <&cru MCLK_I2S4_8CH_TX>,
+ <&cru MCLK_SPDIF2_DP0>;
+ clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+ phys = <&usbdp_phy0 PHY_TYPE_DP>;
+ power-domains = <&power RK3588_PD_VO0>;
+ resets = <&cru SRST_DP0>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp0_in: port@0 {
+ reg = <0>;
+ };
+
+ dp0_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi0: hdmi@fde80000 {
compatible = "rockchip,rk3588-dw-hdmi-qp";
reg = <0x0 0xfde80000 0x0 0x20000>;
@@ -3055,6 +3186,30 @@ mipidcphy1: phy@fedb0000 {
status = "disabled";
};
+ csi_dphy0: phy@fedc0000 {
+ compatible = "rockchip,rk3588-csi-dphy";
+ reg = <0x0 0xfedc0000 0x0 0x8000>;
+ clocks = <&cru PCLK_CSIPHY0>;
+ clock-names = "pclk";
+ #phy-cells = <0>;
+ resets = <&cru SRST_P_CSIPHY0>, <&cru SRST_CSIPHY0>;
+ reset-names = "apb", "phy";
+ rockchip,grf = <&csidphy0_grf>;
+ status = "disabled";
+ };
+
+ csi_dphy1: phy@fedc8000 {
+ compatible = "rockchip,rk3588-csi-dphy";
+ reg = <0x0 0xfedc8000 0x0 0x8000>;
+ clocks = <&cru PCLK_CSIPHY1>;
+ clock-names = "pclk";
+ #phy-cells = <0>;
+ resets = <&cru SRST_P_CSIPHY1>, <&cru SRST_CSIPHY1>;
+ reset-names = "apb", "phy";
+ rockchip,grf = <&csidphy1_grf>;
+ status = "disabled";
+ };
+
combphy0_ps: phy@fee00000 {
compatible = "rockchip,rk3588-naneng-combphy";
reg = <0x0 0xfee00000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 9041448..6e5a584 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -210,6 +210,36 @@ i2s10_8ch: i2s@fde00000 {
status = "disabled";
};
+ dp1: dp@fde60000 {
+ compatible = "rockchip,rk3588-dp";
+ reg = <0x0 0xfde60000 0x0 0x4000>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru CLK_AUX16M_1>;
+ assigned-clock-rates = <16000000>;
+ clocks = <&cru PCLK_DP1>, <&cru CLK_AUX16M_1>,
+ <&cru CLK_DP1>, <&cru MCLK_I2S8_8CH_TX>,
+ <&cru MCLK_SPDIF5_DP1>;
+ clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+ phys = <&usbdp_phy1 PHY_TYPE_DP>;
+ power-domains = <&power RK3588_PD_VO0>;
+ resets = <&cru SRST_DP1>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp1_in: port@0 {
+ reg = <0>;
+ };
+
+ dp1_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi1: hdmi@fdea0000 {
compatible = "rockchip,rk3588-dw-hdmi-qp";
reg = <0x0 0xfdea0000 0x0 0x20000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 69833a0..fafeabe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -391,6 +391,17 @@ &hdmi1_sound {
status = "okay";
};
+&hdmi_receiver_cma {
+ status = "okay";
+};
+
+&hdmi_receiver {
+ hpd-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&hdptxphy0 {
status = "okay";
};
@@ -629,6 +640,12 @@ usr_led_pin: usr-led-pin {
};
};
+ hdmirx {
+ hdmirx_hpd: hdmirx-5v-detection {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
headphone {
hp_det: hp-det {
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index 8222f1f..9950d11 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -160,6 +160,17 @@ &hdmi1_sound {
status = "okay";
};
+&hdmi_receiver_cma {
+ status = "okay";
+};
+
+&hdmi_receiver {
+ hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&hdptxphy0 {
status = "okay";
};
@@ -279,6 +290,12 @@ blue_led_pin: blue-led {
};
};
+ hdmirx {
+ hdmirx_hpd: hdmirx-5v-detection {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
ir-receiver {
ir_receiver_pin: ir-receiver-pin {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
index 8a8f3b2..3bceee9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
@@ -258,6 +258,28 @@ regulator-state-mem {
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m2_xfer>;
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
&i2c6 {
clock-frequency = <400000>;
status = "okay";
@@ -352,6 +374,40 @@ &pd_gpu {
domain-supply = <&vdd_gpu_s0>;
};
+&pd_npu {
+ domain-supply = <&vdd_npu_s0>;
+};
+
+&rknn_core_0 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_1 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_2 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_mmu_0 {
+ status = "okay";
+};
+
+&rknn_mmu_1 {
+ status = "okay";
+};
+
+&rknn_mmu_2 {
+ status = "okay";
+};
+
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
index 78aaa66..b2336c3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -415,6 +415,36 @@ &pcie3x4 {
status = "okay";
};
+&rknn_core_0 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_mem_s0>;
+ status = "okay";
+};
+
+&rknn_core_1 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_mem_s0>;
+ status = "okay";
+};
+
+&rknn_core_2 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_mem_s0>;
+ status = "okay";
+};
+
+&rknn_mmu_0 {
+ status = "okay";
+};
+
+&rknn_mmu_1 {
+ status = "okay";
+};
+
+&rknn_mmu_2 {
+ status = "okay";
+};
+
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
new file mode 100644
index 0000000..2d6fed2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
@@ -0,0 +1,1132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Firefly Technology Co. Ltd
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+ model = "Firefly ROC-RK3588-RT";
+ compatible = "firefly,roc-rk3588-rt", "rockchip,rk3588";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ };
+
+ adc-keys-0 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-0 = <&hp_detect>;
+ pinctrl-names = "default";
+ simple-audio-card,aux-devs = <&_headphones>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <384>;
+ simple-audio-card,name = "rockchip-es8388";
+ simple-audio-card,pin-switches = "Headphones";
+ simple-audio-card,routing =
+ "Speaker", "LOUT2",
+ "Speaker", "ROUT2",
+ "Headphones Amplifier INL", "LOUT1",
+ "Headphones Amplifier INR", "ROUT1",
+ "Headphones", "Headphones Amplifier OUTL",
+ "Headphones", "Headphones Amplifier OUTR",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ amp_headphones: headphones-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&headphone_amplifier_en>;
+ sound-name-prefix = "Headphones Amplifier";
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 70 75 80 100>;
+ #cooling-cells = <2>;
+ fan-supply = <&vcc5v0_sys>;
+ pwms = <&pwm15 0 50000 1>;
+ };
+
+ hdmi0-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
+ hdmi1-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi1_con_in: endpoint {
+ remote-endpoint = <&hdmi1_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ power_led {
+ gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ user_led {
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+ };
+
+ vbus5v0_typec: regulator-vbus5v0-typec {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec5v_pwren>;
+ regulator-name = "vbus5v0_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc12v_dcin: regulator-vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-name = "vcc12v_dcin";
+ };
+
+ vcc3v3_sata2: vcc3v3-sata2 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc3v3_sata2";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc3v3_sd_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc3v3_sys: regulator-vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_wlan: regulator-vcc3v3-wlan {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pwren>;
+ regulator-name = "vcc3v3_wlan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_host: regulator-vcc5v0-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_host3: regulator-vcc5v0-host3 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host3_en>;
+ regulator-name = "vcc5v0_host3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus>;
+ status = "okay";
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ sram-supply = <&vdd_gpu_mem_s0>;
+ status = "okay";
+};
+
+&hdmi0 {
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi0_con_in>;
+ };
+};
+
+&hdmi0_sound {
+ status = "okay";
+};
+
+&hdmi1 {
+ status = "okay";
+};
+
+&hdmi1_in {
+ hdmi1_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_hdmi1>;
+ };
+};
+
+&hdmi1_out {
+ hdmi1_out_con: endpoint {
+ remote-endpoint = <&hdmi1_con_in>;
+ };
+};
+
+&hdmi1_sound {
+ status = "okay";
+};
+
+&hdptxphy0 {
+ status = "okay";
+};
+
+&hdptxphy1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ /* pc9202 watchdog@3c with enable-gpio gpio0-c3 */
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+ fcs,suspend-voltage-selector = <1>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+ fcs,suspend-voltage-selector = <1>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388", "everest,es8328";
+ reg = <0x11>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ AVDD-supply = <&vcc_1v8_s0>;
+ DVDD-supply = <&vcc_1v8_s0>;
+ HPVDD-supply = <&vcc_3v3_s0>;
+ PVDD-supply = <&vcc_1v8_s0>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6m0_xfer>;
+
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus5v0_typec>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ wakeup-source;
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
+&i2s5_8ch {
+ status = "okay";
+};
+
+&i2s6_8ch {
+ status = "okay";
+};
+
+&mdio0 {
+ rgmii_phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8211f_0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8211f_1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1l0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>;
+ reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_wlan>;
+ status = "okay";
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_rst>;
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pd_gpu {
+ domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+ audio {
+ hp_detect: headphone-detect {
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ headphone_amplifier_en: headphone-amplifier-en {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gpio-leds {
+ led_pins: led-pins {
+ rockchip,pins =
+ <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie2 {
+ pcie2_0_rst: pcie2-0-rst {
+ rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_0_wake: pcie2-0-wake {
+ rockchip,pins = <4 RK_PA4 4 &pcfg_pull_none>;
+ };
+
+ pcie2_0_clkreq: pcie2-0-clkreq {
+ rockchip,pins = <4 RK_PA3 4 &pcfg_pull_none>;
+ };
+
+ pcie2_2_rst: pcie2-2-rst {
+ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtl8211f {
+ rtl8211f_0_rst: rtl8211f-0-rst {
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ rtl8211f_1_rst: rtl8211f-1-rst {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_host3_en: vcc5v0-host3-en {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ typec5v_pwren: typec5v-pwren {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usbc0_int: usbc0-int {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wlan {
+ wifi_pwren: wifi-pwren {
+ rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm15 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm15m2_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd_s0>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-name = "vdd_gpu_s0";
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-name = "vdd_log_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-name = "vdd_vdenc_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-name = "vdd_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-name = "vdd2_ddr_s3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-name = "vcc_3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-name = "vddq_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-name = "vcc_1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-name = "avcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-name = "avdd_1v2_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-name = "vcc_3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-name = "vccio_sd_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-name = "pldo6_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-name = "vdd_0v75_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ avdd_ddr_pll_s0: nldo-reg2 {
+ regulator-name = "avdd_ddr_pll_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-name = "avdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ avdd_0v85_s0: nldo-reg4 {
+ regulator-name = "avdd_0v85_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-name = "vdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc5v0_host3>;
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_host3>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
+
+&usbdp_phy1 {
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
+
+&vp1 {
+ vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+ remote-endpoint = <&hdmi1_in_vp1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
index 7de1711..bc81408 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -57,6 +57,31 @@ analog-sound {
"Headphone", "Headphones";
};
+ bridge {
+ compatible = "radxa,ra620";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_bridge_in: endpoint {
+ remote-endpoint = <&dp1_out_con>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_bridge_out: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
+
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -73,6 +98,17 @@ hdd-led2 {
};
};
+ hdmi0-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_bridge_out>;
+ };
+ };
+ };
+
hdmi1-con {
compatible = "hdmi-connector";
type = "a";
@@ -268,6 +304,24 @@ &cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
+&dp1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp1m0_pins>;
+};
+
+&dp1_in {
+ dp1_in_vp2: endpoint {
+ remote-endpoint = <&vp2_out_dp1>;
+ };
+};
+
+&dp1_out {
+ dp1_out_con: endpoint {
+ remote-endpoint = <&hdmi_bridge_in>;
+ };
+};
+
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
@@ -1261,3 +1315,10 @@ vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
remote-endpoint = <&hdmi1_in_vp1>;
};
};
+
+&vp2 {
+ vp2_out_dp1: endpoint@b {
+ reg = <ROCKCHIP_VOP2_EP_DP1>;
+ remote-endpoint = <&dp1_in_vp2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
index 973d39a..3bbe788 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
/ {
@@ -55,6 +56,18 @@ rfkill-bt {
shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
};
+ vbus5v0_typec: vbus5v0-typec {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus5v0_typec_en>;
+ regulator-name = "vbus5v0_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
compatible = "regulator-fixed";
enable-active-high;
@@ -268,6 +281,99 @@ regulator-state-mem {
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m2_xfer>;
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <500>;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m1_xfer>;
+ status = "okay";
+
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus5v0_typec>;
+ /*
+ * When the board is starting to send power-delivery messages
+ * too late (5 seconds according to the specification), the
+ * power-supply reacts with a hard-reset. That removes the
+ * power from VBUS for some time, which resets te whole board.
+ */
+ status = "fail";
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ /* fusb302 supports PD Rev 2.0 Ver 1.2 */
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+ power-role = "sink";
+ try-power-role = "sink";
+ op-sink-microwatt = <1000000>;
+ sink-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>,
+ <PDO_VAR(5000, 20000, 5000)>;
+
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0xffffffff>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_to_usbc0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_sbu>;
+ };
+ };
+ };
+ };
+ };
+};
+
&i2c6 {
status = "okay";
@@ -392,6 +498,10 @@ &pd_gpu {
domain-supply = <&vdd_gpu_s0>;
};
+&pd_npu {
+ domain-supply = <&vdd_npu_s0>;
+};
+
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
@@ -418,12 +528,52 @@ pcie3_vcc3v3_en: pcie3-vcc3v3-en {
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb {
+ usbc0_int: usbc0-int {
+ rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vbus5v0_typec_en: vbus5v0-typec-en {
+ rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pwm1 {
status = "okay";
};
+&rknn_core_0 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_1 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_2 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_mmu_0 {
+ status = "okay";
+};
+
+&rknn_mmu_1 {
+ status = "okay";
+};
+
+&rknn_mmu_2 {
+ status = "okay";
+};
+
&saradc {
vref-supply = <&avcc_1v8_s0>;
status = "okay";
@@ -803,6 +953,14 @@ &uart2 {
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
&u2phy1 {
status = "okay";
};
@@ -830,6 +988,27 @@ &u2phy3_host {
status = "okay";
};
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
+
&usbdp_phy1 {
status = "okay";
};
@@ -842,6 +1021,17 @@ &usb_host0_ohci {
status = "okay";
};
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ usb_host0_xhci_to_usbc0: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
&usb_host1_ehci {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
index 74c7b65..5e984a4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
@@ -99,12 +99,24 @@ pcie3x2_rst: pcie3x2-rst {
};
usb {
+ usbc_sbu_dc: usbc-sbu-dc {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
+&usbdp_phy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc_sbu_dc>;
+ sbu1-dc-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+};
+
&vcc5v0_host {
enable-active-high;
gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 9407a7c..8ef0101 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -38,12 +38,24 @@ &uart6 {
&pinctrl {
usb {
+ usbc_sbu_dc: usbc-sbu-dc {
+ rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
+&usbdp_phy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc_sbu_dc>;
+ sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+};
+
&vcc5v0_host {
enable-active-high;
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
index f16ff00..c176383 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
@@ -122,9 +122,21 @@ usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
+
+ usbc_sbu_dc: usbc-sbu-dc {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
+&usbdp_phy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc_sbu_dc>;
+ sbu1-dc-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+};
+
&vcc3v3_pcie2x1l0 {
gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
index b2947b3..189444d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -39,6 +39,18 @@ chosen {
stdout-path = "serial2:1500000n8";
};
+ dp-con {
+ compatible = "dp-connector";
+ label = "DP OUT";
+ type = "mini";
+
+ port {
+ dp_con_in: endpoint {
+ remote-endpoint = <&dp0_out_con>;
+ };
+ };
+ };
+
hdmi-con {
compatible = "hdmi-connector";
type = "d";
@@ -215,6 +227,24 @@ &cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
+&dp0 {
+ pinctrl-0 = <&dp0m0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&dp0_in {
+ dp0_in_vp2: endpoint {
+ remote-endpoint = <&vp2_out_dp0>;
+ };
+};
+
+&dp0_out {
+ dp0_out_con: endpoint {
+ remote-endpoint = <&dp_con_in>;
+ };
+};
+
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
@@ -890,3 +920,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
remote-endpoint = <&hdmi0_in_vp0>;
};
};
+
+&vp2 {
+ vp2_out_dp0: endpoint@a {
+ reg = <ROCKCHIP_VOP2_EP_DP0>;
+ remote-endpoint = <&dp0_in_vp2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
index 55fc7cb..f5894672 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
@@ -612,6 +612,56 @@ &i2c6 {
pinctrl-0 = <&i2c6m3_xfer>;
status = "okay";
+ fusb302: typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&usbc0_int>;
+ pinctrl-names = "default";
+ vbus-supply = <&usb_otg_vbus>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
+ PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+
rtc_hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -640,8 +690,34 @@ battery@62 {
0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
cellwise,monitor-interval-ms = <5000>;
monitored-battery = <&battery>;
+ power-supplies = <&bq25703>;
status = "okay";
};
+
+ bq25703: charger@6b {
+ compatible = "ti,bq25703a";
+ reg = <0x6b>;
+ input-current-limit-microamp = <5000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
+ monitored-battery = <&battery>;
+ pinctrl-0 = <&charger_int_h>;
+ pinctrl-names = "default";
+ power-supplies = <&fusb302>;
+
+ regulators {
+ usb_otg_vbus: vbus {
+ enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&boost_enable_h>;
+ pinctrl-names = "default";
+ regulator-max-microamp = <960000>;
+ regulator-max-microvolt = <5088000>;
+ regulator-min-microamp = <512000>;
+ regulator-min-microvolt = <4992000>;
+ regulator-name = "usb_otg_vbus";
+ };
+ };
+ };
};
&i2c7 {
@@ -853,6 +929,12 @@ usbc0_int: usbc0-int {
rockchip,pins =
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
};
+
+ usbc_sbu_dc: usbc-sbu-dc {
+ rockchip,pins =
+ <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
vcc3v3-lcd {
@@ -1286,6 +1368,46 @@ bluetooth {
};
};
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ pinctrl-0 = <&usbc_sbu_dc>;
+ pinctrl-names = "default";
+ sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
+
&vop {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index fbf062e..1b6a59f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -251,6 +251,10 @@ hdmi0_out_con: endpoint {
};
};
+&hdmi0_sound {
+ status = "okay";
+};
+
&hdptxphy0 {
status = "okay";
};
@@ -335,6 +339,10 @@ hym8563: rtc@51 {
};
};
+&i2s5_8ch {
+ status = "okay";
+};
+
&mdio1 {
rgmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id001c.c916";
@@ -363,6 +371,10 @@ &pd_gpu {
domain-supply = <&vdd_gpu_s0>;
};
+&pd_npu {
+ domain-supply = <&vdd_npu_s0>;
+};
+
&pinctrl {
gpio-key {
key1_pin: key1-pin {
@@ -421,6 +433,36 @@ rtl8211f_rst: rtl8211f-rst {
};
};
+&rknn_core_0 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_1 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_2 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_mmu_0 {
+ status = "okay";
+};
+
+&rknn_mmu_1 {
+ status = "okay";
+};
+
+&rknn_mmu_2 {
+ status = "okay";
+};
+
&saradc {
vref-supply = <&avcc_1v8_s0>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index 11940c7..dafad29 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -376,6 +376,10 @@ &pd_gpu {
domain-supply = <&vdd_gpu_s0>;
};
+&pd_npu {
+ domain-supply = <&vdd_npu_s0>;
+};
+
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
@@ -406,6 +410,36 @@ &pwm0 {
status = "okay";
};
+&rknn_core_0 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_1 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_core_2 {
+ npu-supply = <&vdd_npu_s0>;
+ sram-supply = <&vdd_npu_s0>;
+ status = "okay";
+};
+
+&rknn_mmu_0 {
+ status = "okay";
+};
+
+&rknn_mmu_1 {
+ status = "okay";
+};
+
+&rknn_mmu_2 {
+ status = "okay";
+};
+
&saradc {
vref-supply = <&avcc_1v8_s0>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index f894742..19a08f7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -58,6 +58,13 @@ io-led {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
+
+ power-led {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
};
fan: pwm-fan {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index de21957..fc105d4 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -68,7 +68,7 @@ spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
spdif_tx: endpoint {
remote-endpoint = <&spdif_hiecout1>;
};
@@ -79,7 +79,7 @@ comp-spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
comp_spdif_tx: endpoint {
remote-endpoint = <&comp_spdif_hiecout1>;
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
index fba454ad..10efa74 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -74,7 +74,7 @@ spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
spdif_tx: endpoint {
remote-endpoint = <&spdif_hiecout1>;
};
@@ -85,7 +85,7 @@ comp-spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
comp_spdif_tx: endpoint {
remote-endpoint = <&comp_spdif_hiecout1>;
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 20e5fb7..3c4dcfb8 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -68,7 +68,7 @@ spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
spdif_tx: endpoint {
remote-endpoint = <&spdif_hiecout1>;
};
@@ -79,7 +79,7 @@ comp-spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
- port@0 {
+ port {
comp_spdif_tx: endpoint {
remote-endpoint = <&comp_spdif_hiecout1>;
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 335093d..875b938 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -947,6 +947,7 @@ pcie: pcie@66000000 {
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index d6e3cc6..4d6c3c2 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -921,6 +921,7 @@ pcie: pcie@66000000 {
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi
index 75697ac..88e214d 100644
--- a/arch/arm64/boot/dts/st/stm32mp231.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi
@@ -1064,28 +1064,6 @@ gpioi: gpio@442c0000 {
st,bank-name = "GPIOI";
status = "disabled";
};
-
- gpioj: gpio@442d0000 {
- reg = <0x90000 0x400>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&scmi_clk CK_SCMI_GPIOJ>;
- st,bank-name = "GPIOJ";
- status = "disabled";
- };
-
- gpiok: gpio@442e0000 {
- reg = <0xa0000 0x400>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&scmi_clk CK_SCMI_GPIOK>;
- st,bank-name = "GPIOK";
- status = "disabled";
- };
};
rtc: rtc@46000000 {
diff --git a/arch/arm64/boot/dts/st/stm32mp235f-dk.dts b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
index 04d1b43..c3e6880 100644
--- a/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
@@ -19,6 +19,7 @@ / {
compatible = "st,stm32mp235f-dk", "st,stm32mp235";
aliases {
+ ethernet0 = ðernet1;
serial0 = &usart2;
};
@@ -56,7 +57,7 @@ led-blue {
memory@80000000 {
device_type = "memory";
- reg = <0x0 0x80000000 0x1 0x0>;
+ reg = <0x0 0x80000000 0x0 0x80000000>;
};
reserved-memory {
@@ -77,6 +78,28 @@ &arm_wdt {
status = "okay";
};
+ðernet1 {
+ pinctrl-0 = <ð1_rgmii_pins_b>;
+ pinctrl-1 = <ð1_rgmii_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ phy-handle = <&phy1_eth1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1_eth1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <1>;
+ reset-gpios = <&gpioa 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ };
+ };
+};
+
&scmi_regu {
scmi_vddio1: regulator@0 {
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 5ac9e72..e0d102e 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,132 @@
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
&pinctrl {
+ eth1_mdio_pins_a: eth1-mdio-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, AF10)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 2, AF10)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ eth1_mdio_sleep_pins_a: eth1-mdio-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('F', 2, ANALOG)>; /* ETH_MDIO */
+ };
+ };
+
+ eth1_rgmii_pins_a: eth1-rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, AF12)>; /* ETH_RGMII_GTX_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ pins4 {
+ pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+ bias-disable;
+ };
+ };
+
+ eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+ <STM32_PINMUX('A', 14, ANALOG)>; /* ETH_RGMII_RX_CLK */
+ };
+ };
+
+ eth1_rgmii_pins_b: eth1-rgmii-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, AF12)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('A', 9, AF10)>, /* ETH_MDC */
+ <STM32_PINMUX('A', 10, AF10)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ pins4 {
+ pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+ bias-disable;
+ };
+ };
+
+ eth1_rgmii_sleep_pins_b: eth1-rgmii-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('A', 10, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+ <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+ };
+ };
+
eth2_rgmii_pins_a: eth2-rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('C', 7, AF10)>, /* ETH_RGMII_TXD0 */
@@ -133,6 +259,26 @@ pins {
};
};
+ pcie_pins_a: pcie-0 {
+ pins {
+ pinmux = <STM32_PINMUX('J', 0, AF4)>;
+ bias-disable;
+ };
+ };
+
+ pcie_init_pins_a: pcie-init-0 {
+ pins {
+ pinmux = <STM32_PINMUX('J', 0, GPIO)>;
+ output-low;
+ };
+ };
+
+ pcie_sleep_pins_a: pcie-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('J', 0, ANALOG)>;
+ };
+ };
+
pwm3_pins_a: pwm3-0 {
pins {
pinmux = <STM32_PINMUX('B', 15, AF7)>; /* TIM3_CH2 */
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 303abf9..a8e6e0f 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -52,6 +52,12 @@ clk_rcbsec: clk-rcbsec {
compatible = "fixed-clock";
clock-frequency = <64000000>;
};
+
+ clk_flexgen_27_fixed: clk-54000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <54000000>;
+ };
};
firmware {
@@ -122,6 +128,15 @@ intc: interrupt-controller@4ac00000 {
<0x0 0x4ac20000 0x0 0x20000>,
<0x0 0x4ac40000 0x0 0x20000>,
<0x0 0x4ac60000 0x0 0x20000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ v2m0: v2m@48090000 {
+ compatible = "arm,gic-v2m-frame";
+ reg = <0x0 0x48090000 0x0 0x1000>;
+ msi-controller;
+ };
};
psci {
@@ -1553,6 +1568,18 @@ trigger@4 {
};
};
+ ltdc: display-controller@48010000 {
+ compatible = "st,stm32mp251-ltdc";
+ reg = <0x48010000 0x400>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CK_KER_LTDC>, <&rcc CK_BUS_LTDC>;
+ clock-names = "lcd", "bus";
+ resets = <&rcc LTDC_R>;
+ access-controllers = <&rifsc 80>;
+ status = "disabled";
+ };
+
csi: csi@48020000 {
compatible = "st,stm32mp25-csi";
reg = <0x48020000 0x2000>;
@@ -1654,6 +1681,56 @@ stmmac_axi_config_1: stmmac-axi-config {
snps,wr_osr_lmt = <0x7>;
};
};
+
+ pcie_ep: pcie-ep@48400000 {
+ compatible = "st,stm32mp25-pcie-ep";
+ reg = <0x48400000 0x100000>,
+ <0x48500000 0x100000>,
+ <0x48700000 0x80000>,
+ <0x10000000 0x10000000>;
+ reg-names = "dbi", "dbi2", "atu", "addr_space";
+ clocks = <&rcc CK_BUS_PCIE>;
+ resets = <&rcc PCIE_R>;
+ phys = <&combophy PHY_TYPE_PCIE>;
+ access-controllers = <&rifsc 68>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+ };
+
+ pcie_rc: pcie@48400000 {
+ compatible = "st,stm32mp25-pcie-rc";
+ device_type = "pci";
+ reg = <0x48400000 0x400000>,
+ <0x10000000 0x10000>;
+ reg-names = "dbi", "config";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
+ <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
+ <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
+ dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
+ clocks = <&rcc CK_BUS_PCIE>;
+ resets = <&rcc PCIE_R>;
+ msi-parent = <&v2m0>;
+ access-controllers = <&rifsc 68>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ phys = <&combophy PHY_TYPE_PCIE>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
};
bsec: efuse@44000000 {
@@ -1672,6 +1749,13 @@ package_otp@1e8 {
};
};
+ hdp: pinctrl@44090000 {
+ compatible = "st,stm32mp251-hdp";
+ reg = <0x44090000 0x400>;
+ clocks = <&rcc CK_BUS_HDP>;
+ status = "disabled";
+ };
+
rcc: clock-controller@44200000 {
compatible = "st,stm32mp25-rcc";
reg = <0x44200000 0x10000>;
@@ -1856,6 +1940,7 @@ exti1: interrupt-controller@44220000 {
syscfg: syscon@44230000 {
compatible = "st,stm32mp25-syscfg", "syscon";
reg = <0x44230000 0x10000>;
+ #clock-cells = <0>;
};
pinctrl: pinctrl@44240000 {
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
index f689b47..7a598f5 100644
--- a/arch/arm64/boot/dts/st/stm32mp255.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -5,7 +5,25 @@
*/
#include "stm32mp253.dtsi"
+<dc {
+ compatible = "st,stm32mp255-ltdc";
+ clocks = <&clk_flexgen_27_fixed>, <&rcc CK_BUS_LTDC>, <&syscfg>, <&lvds>;
+ clock-names = "lcd", "bus", "ref", "lvds";
+};
+
&rifsc {
+ lvds: lvds@48060000 {
+ compatible = "st,stm32mp255-lvds", "st,stm32mp25-lvds";
+ reg = <0x48060000 0x2000>;
+ #clock-cells = <0>;
+ clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+ clock-names = "pclk", "ref";
+ resets = <&rcc LVDS_R>;
+ access-controllers = <&rifsc 84>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+ };
+
vdec: vdec@480d0000 {
compatible = "st,stm32mp25-vdec";
reg = <0x480d0000 0x3c8>;
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
index a278a1e..e718d88 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
@@ -19,6 +19,7 @@ / {
compatible = "st,stm32mp257f-dk", "st,stm32mp257";
aliases {
+ ethernet0 = ðernet1;
serial0 = &usart2;
};
@@ -77,6 +78,28 @@ &arm_wdt {
status = "okay";
};
+ðernet1 {
+ pinctrl-0 = <ð1_rgmii_pins_b>;
+ pinctrl-1 = <ð1_rgmii_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ phy-handle = <&phy1_eth1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1_eth1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <1>;
+ reset-gpios = <&gpioa 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ };
+ };
+};
+
&scmi_regu {
scmi_vddio1: regulator@0 {
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 836b195..6e16507 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -19,6 +19,7 @@ / {
aliases {
ethernet0 = ðernet2;
+ ethernet1 = ðernet1;
serial0 = &usart2;
serial1 = &usart6;
};
@@ -70,6 +71,42 @@ memory@80000000 {
reg = <0x0 0x80000000 0x1 0x0>;
};
+ panel_lvds: display {
+ compatible = "edt,etml0700z9ndha", "panel-lvds";
+ enable-gpios = <&gpiog 15 GPIO_ACTIVE_HIGH>;
+ backlight = <&panel_lvds_backlight>;
+ power-supply = <&scmi_v3v3>;
+ width-mm = <156>;
+ height-mm = <92>;
+ data-mapping = "vesa-24";
+ status = "okay";
+
+ panel-timing {
+ clock-frequency = <54000000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <150>;
+ hback-porch = <150>;
+ hsync-len = <21>;
+ vfront-porch = <24>;
+ vback-porch = <24>;
+ vsync-len = <21>;
+ };
+
+ port {
+ lvds_panel_in: endpoint {
+ remote-endpoint = <&lvds_out0>;
+ };
+ };
+ };
+
+ panel_lvds_backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -100,7 +137,7 @@ &combophy {
};
&csi {
- vdd-supply = <&scmi_vddcore>;
+ vdd-supply = <&scmi_vddcore>;
vdda18-supply = <&scmi_v1v8>;
status = "okay";
ports {
@@ -133,6 +170,29 @@ dcmipp_0: endpoint {
};
};
+ðernet1 {
+ pinctrl-0 = <ð1_rgmii_pins_a ð1_mdio_pins_a>;
+ pinctrl-1 = <ð1_rgmii_sleep_pins_a ð1_mdio_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-handle = <&phy1_eth1>;
+ phy-mode = "rgmii-id";
+ st,ext-phyclk;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1_eth1: ethernet-phy@4 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <4>;
+ reset-gpios = <&gpioj 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ };
+ };
+};
+
ðernet2 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <ð2_rgmii_pins_a>;
@@ -151,7 +211,7 @@ phy0_eth2: ethernet-phy@1 {
reg = <1>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
- reset-gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
};
};
};
@@ -183,6 +243,15 @@ imx335_ep: endpoint {
};
};
};
+
+ ili2511: ili2511@41 {
+ compatible = "ilitek,ili251x";
+ reg = <0x41>;
+ interrupt-parent = <&gpioi>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpiog 14 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
};
&i2c8 {
@@ -230,6 +299,58 @@ timer {
};
};
+<dc {
+ status = "okay";
+ port {
+ ltdc_ep0_out: endpoint {
+ remote-endpoint = <&lvds_in>;
+ };
+ };
+};
+
+&lvds {
+ status = "okay";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds_out0: endpoint {
+ remote-endpoint = <&lvds_panel_in>;
+ };
+ };
+ };
+};
+
+&pcie_ep {
+ pinctrl-names = "default", "init";
+ pinctrl-0 = <&pcie_pins_a>;
+ pinctrl-1 = <&pcie_init_pins_a>;
+ reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+};
+
+&pcie_rc {
+ pinctrl-names = "default", "init", "sleep";
+ pinctrl-0 = <&pcie_pins_a>;
+ pinctrl-1 = <&pcie_init_pins_a>;
+ pinctrl-2 = <&pcie_sleep_pins_a>;
+ status = "okay";
+
+ pcie@0,0 {
+ reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+};
+
&rtc {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index a5ebb3f..5b06e26 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -363,6 +363,7 @@ soc: soc@0 {
gic: interrupt-controller@10400000 {
compatible = "arm,gic-v3";
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index aad9177..743115b 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -28,6 +28,7 @@
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am62-pocketbeagle2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6254atl-sk.dtb
# Boards with AM62Ax SoC
dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -38,6 +39,7 @@
# Boards with AM62Px SoC
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-ivy.dtb
@@ -69,6 +71,7 @@
dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-gpio-fan.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-pcie-usb2.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-peb-c-010.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
@@ -131,6 +134,7 @@
k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo
# Boards with J722s SoC
dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb
@@ -206,6 +210,8 @@
k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-pcie-usb2.dtbo
k3-am642-phyboard-electra-x27-gpio1-spi1-uart3-dtbs := \
k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtbo
+k3-am642-phyboard-electra-peb-c-010-dtbs := \
+ k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-peb-c-010.dtbo
k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
@@ -230,6 +236,8 @@
k3-j721e-sk-csi2-dual-imx219.dtbo
k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
k3-j721s2-evm-pcie1-ep.dtbo
+k3-j721s2-evm-usb0-type-a-dtbs := k3-j721s2-common-proc-board.dtb \
+ k3-j721s2-evm-usb0-type-a.dtbo
k3-j722s-evm-csi2-quad-rpi-cam-imx219-dtbs := k3-j722s-evm.dtb \
k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
k3-j722s-evm-csi2-quad-tevi-ov5640-dtbs := k3-j722s-evm.dtb \
@@ -272,6 +280,7 @@
k3-j721e-evm-pcie1-ep.dtb \
k3-j721e-sk-csi2-dual-imx219.dtb \
k3-j721s2-evm-pcie1-ep.dtb \
+ k3-j721s2-evm-usb0-type-a.dtb \
k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
k3-j722s-evm-csi2-quad-tevi-ov5640.dtb \
k3-j742s2-evm-usb0-type-a.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index 4609f36..ecfba05 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -7,12 +7,20 @@
/dts-v1/;
+#include "k3-am625.dtsi"
#include "k3-am62x-sk-common.dtsi"
/ {
compatible = "ti,am62-lp-sk", "ti,am625";
model = "Texas Instruments AM62x LP SK";
+ memory@80000000 {
+ /* 2G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+ device_type = "memory";
+ bootph-pre-ram;
+ };
+
vmain_pd: regulator-0 {
/* TPS65988 PD CONTROLLER OUTPUT */
compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 120ba8f..40fb3c9 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -808,6 +808,7 @@ mailbox0_cluster0: mailbox@29000000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
ecap0: pwm@23100000 {
@@ -1031,6 +1032,9 @@ ti_csi2rx0: ticsi2rx@30102000 {
cdns_csi2rx0: csi-bridge@30101000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x30101000 0x00 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 10e6b5c..eeca643 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -46,31 +46,19 @@ ramoops@9c700000 {
pmsg-size = <0x8000>;
};
- rtos_ipc_memory_region: ipc-memories@9c800000 {
+ rtos_ipc_memory_region: memory@9c800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x00300000>;
no-map;
};
- mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cb00000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@9cc00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cc00000 0x00 0xe00000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9da00000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+ wkup_r5fss0_core0_memory_region: memory@9db00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9db00000 0x00 0xc00000>;
no-map;
@@ -245,20 +233,6 @@ cpsw3g_phy1: ethernet-phy@1 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
&main_pktdma {
bootph-all;
};
@@ -364,13 +338,6 @@ i2c_som_rtc: rtc@52 {
};
};
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
@@ -399,12 +366,4 @@ &sdhci0 {
status = "okay";
};
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
-};
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
index 2e4cf65..7a4cffc 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -54,18 +54,6 @@ linux,cma {
linux,cma-default;
};
- mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cb00000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@9cc00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cc00000 0x00 0xe00000>;
- no-map;
- };
-
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
alignment = <0x1000>;
@@ -78,7 +66,13 @@ secure_ddr: optee@9e800000 {
no-map;
};
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9da00000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: memory@9db00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9db00000 0x00 0xc00000>;
no-map;
@@ -292,13 +286,6 @@ &epwm2 {
pinctrl-0 = <&epwm2_pins_default>;
};
-&mailbox0_cluster0 {
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
@@ -349,13 +336,6 @@ &main_i2c2 {
status = "okay";
};
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
&mcu_pmx0 {
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
@@ -519,3 +499,5 @@ ldo4_reg: ldo4 {
};
};
};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..ea69fab9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_m4fss_dma_memory_region: memory@9cb00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cb00000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_m4fss_memory_region: memory@9cc00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cc00000 0x00 0xe00000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_m4_0: mbox-m4-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mcu_m4fss {
+ mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+ memory-region = <&mcu_m4fss_dma_memory_region>,
+ <&mcu_m4fss_memory_region>;
+ status = "okay";
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index bc2289d..dc4b228 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -189,7 +189,7 @@ reg_usb0_vbus: regulator-usb0-vbus {
regulator-name = "USB_1_EN";
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -206,7 +206,13 @@ secure_ddr: optee@9e800000 {
no-map;
};
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9da00000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: memory@9db00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9db00000 0x00 0xc00000>;
no-map;
@@ -1316,13 +1322,6 @@ &main_i2c3 {
status = "disabled";
};
-&mailbox0_cluster0 {
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
/* Verdin CAN_1 */
&main_mcan0 {
pinctrl-names = "default";
@@ -1506,3 +1505,5 @@ &wkup_uart0 {
pinctrl-0 = <&pinctrl_wkup_uart0>;
status = "disabled";
};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 6549b7e..75aed3a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -128,6 +128,7 @@ wkup_r5fss0_core0: r5f@78000000 {
ti,sci = <&dmsc>;
ti,sci-dev-id = <121>;
ti,sci-proc-ids = <0x01 0xff>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 72b09f9..7028d98 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -83,7 +83,7 @@ secure_ddr: optee@9e800000 {
no-map;
};
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9db00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9db00000 0x00 0xc00000>;
no-map;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
new file mode 100644
index 0000000..fe0b98e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Common dtsi for AM625 SK and derivatives
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+ opp-table {
+ /* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ clock-latency-ns = <6000000>;
+ };
+ };
+
+ vmain_pd: regulator-0 {
+ /* TPS65988 PD CONTROLLER OUTPUT */
+ compatible = "regulator-fixed";
+ regulator-name = "vmain_pd";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vcc_5v0: regulator-1 {
+ /* Output of LM34936 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vmain_pd>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vcc_3v3_sys: regulator-2 {
+ /* output of LM61460-Q1 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vmain_pd>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vdd_mmc1: regulator-3 {
+ /* TPS22918DBVR */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_mmc1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ vin-supply = <&vcc_3v3_sys>;
+ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ vdd_sd_dv: regulator-4 {
+ /* Output of TLV71033 */
+ compatible = "regulator-gpio";
+ regulator-name = "tlv71033";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_sd_dv_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&vcc_5v0>;
+ gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ bootph-all;
+ };
+
+ vcc_1v8: regulator-5 {
+ /* output of TPS6282518DMQ */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&main_pmx0 {
+ main_mmc0_pins_default: main-mmc0-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+ AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+ AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+ AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+ AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+ AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+ AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+ AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+ AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+ >;
+ };
+
+ main_rgmii2_pins_default: main-rgmii2-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+ AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+ AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+ AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+ AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+ AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+ AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+ AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+ AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+ AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+ AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+ AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+ >;
+ };
+
+ ospi0_pins_default: ospi0-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+ AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+ AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+ AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+ AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+ AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+ AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+ AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+ AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+ AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+ AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+ >;
+ };
+
+ vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
+ >;
+ bootph-all;
+ };
+
+ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+ >;
+ bootph-all;
+ };
+};
+
+&main_gpio0 {
+ bootph-all;
+};
+
+&main_gpio1 {
+ bootph-all;
+};
+
+&main_i2c1 {
+ exp1: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+ "PRU_DETECT", "MMC1_SD_EN",
+ "VPP_LDO_EN", "EXP_PS_3V3_En",
+ "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+ "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+ "UART1_FET_BUF_EN", "WL_LT_EN",
+ "GPIO_HDMI_RSTn", "CSI_GPIO1",
+ "CSI_GPIO2", "PRU_3V3_EN",
+ "HDMI_INTn", "PD_I2C_IRQ",
+ "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+ "MCASP1_FET_SEL", "UART1_FET_SEL",
+ "TSINT#", "IO_EXP_TEST_LED";
+ bootph-all;
+ };
+};
+
+&sdhci0 {
+ bootph-all;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ disable-wp;
+};
+
+&sdhci1 {
+ vmmc-supply = <&vdd_mmc1>;
+ vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port2 {
+ /* PCB provides an internal delay of 2ns */
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+ cpsw3g_phy1: ethernet-phy@1 {
+ reg = <1>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,min-output-impedance;
+ };
+};
+
+&fss {
+ bootph-all;
+};
+
+&ospi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ospi0_pins_default>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bootph-all;
+
+ partition@0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@80000 {
+ label = "ospi.tispl";
+ reg = <0x80000 0x200000>;
+ };
+
+ partition@280000 {
+ label = "ospi.u-boot";
+ reg = <0x280000 0x400000>;
+ };
+
+ partition@680000 {
+ label = "ospi.env";
+ reg = <0x680000 0x40000>;
+ };
+
+ partition@6c0000 {
+ label = "ospi.env.backup";
+ reg = <0x6c0000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ bootph-pre-ram;
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index d240165..52954c7 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -7,310 +7,17 @@
/dts-v1/;
-#include "k3-am62x-sk-common.dtsi"
+#include "k3-am625.dtsi"
+#include "k3-am625-sk-common.dtsi"
/ {
compatible = "ti,am625-sk", "ti,am625";
model = "Texas Instruments AM625 SK";
- opp-table {
- /* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
- opp-1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-supported-hw = <0x01 0x0004>;
- clock-latency-ns = <6000000>;
- };
- };
-
memory@80000000 {
- device_type = "memory";
/* 2G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-
+ device_type = "memory";
+ bootph-pre-ram;
};
-
- vmain_pd: regulator-0 {
- /* TPS65988 PD CONTROLLER OUTPUT */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vmain_pd";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_5v0: regulator-1 {
- /* Output of LM34936 */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vcc_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_3v3_sys: regulator-2 {
- /* output of LM61460-Q1 */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vmain_pd>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_mmc1: regulator-3 {
- /* TPS22918DBVR */
- bootph-all;
- compatible = "regulator-fixed";
- regulator-name = "vdd_mmc1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- enable-active-high;
- vin-supply = <&vcc_3v3_sys>;
- gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
- };
-
- vdd_sd_dv: regulator-4 {
- /* Output of TLV71033 */
- bootph-all;
- compatible = "regulator-gpio";
- regulator-name = "tlv71033";
- pinctrl-names = "default";
- pinctrl-0 = <&vdd_sd_dv_pins_default>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- vin-supply = <&vcc_5v0>;
- gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x0>,
- <3300000 0x1>;
- };
-
- vcc_1v8: regulator-5 {
- /* output of TPS6282518DMQ */
- compatible = "regulator-fixed";
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3_sys>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&main_pmx0 {
- main_mmc0_pins_default: main-mmc0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
- AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
- AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
- AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
- AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
- AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
- AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
- AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
- AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
- AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
- >;
- };
-
- main_rgmii2_pins_default: main-rgmii2-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
- AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
- AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
- AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
- AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
- AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
- AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
- AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
- AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
- AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
- AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
- AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
- >;
- };
-
- ospi0_pins_default: ospi0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
- AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
- AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
- AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
- AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
- AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
- AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
- AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
- AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
- AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
- AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
- >;
- };
-
- vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
- >;
- };
-
- main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
- >;
- };
-};
-
-&main_gpio0 {
- bootph-all;
-};
-
-&main_gpio1 {
- bootph-all;
-};
-
-&main_i2c1 {
- bootph-all;
- exp1: gpio@22 {
- bootph-all;
- compatible = "ti,tca6424";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
- "PRU_DETECT", "MMC1_SD_EN",
- "VPP_LDO_EN", "EXP_PS_3V3_En",
- "EXP_PS_5V0_En", "EXP_HAT_DETECT",
- "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
- "UART1_FET_BUF_EN", "WL_LT_EN",
- "GPIO_HDMI_RSTn", "CSI_GPIO1",
- "CSI_GPIO2", "PRU_3V3_EN",
- "HDMI_INTn", "PD_I2C_IRQ",
- "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
- "MCASP1_FET_SEL", "UART1_FET_SEL",
- "TSINT#", "IO_EXP_TEST_LED";
-
- interrupt-parent = <&main_gpio1>;
- interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
- };
-};
-
-&sdhci0 {
- bootph-all;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
- status = "okay";
-};
-
-&sdhci1 {
- vmmc-supply = <&vdd_mmc1>;
- vqmmc-supply = <&vdd_sd_dv>;
-};
-
-&cpsw3g {
- pinctrl-names = "default";
- pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
-};
-
-&cpsw_port2 {
- phy-mode = "rgmii-rxid";
- phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw3g_mdio {
- cpsw3g_phy1: ethernet-phy@1 {
- reg = <1>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- ti,min-output-impedance;
- };
-};
-
-&fss {
- bootph-all;
-};
-
-&ospi0 {
- bootph-all;
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ospi0_pins_default>;
-
- flash@0 {
- bootph-all;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-tx-bus-width = <8>;
- spi-rx-bus-width = <8>;
- spi-max-frequency = <25000000>;
- cdns,tshsl-ns = <60>;
- cdns,tsd2d-ns = <60>;
- cdns,tchsh-ns = <60>;
- cdns,tslch-ns = <60>;
- cdns,read-delay = <4>;
-
- partitions {
- bootph-all;
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ospi.tiboot3";
- reg = <0x0 0x80000>;
- };
-
- partition@80000 {
- label = "ospi.tispl";
- reg = <0x80000 0x200000>;
- };
-
- partition@280000 {
- label = "ospi.u-boot";
- reg = <0x280000 0x400000>;
- };
-
- partition@680000 {
- label = "ospi.env";
- reg = <0x680000 0x40000>;
- };
-
- partition@6c0000 {
- label = "ospi.env.backup";
- reg = <0x6c0000 0x40000>;
- };
-
- partition@800000 {
- label = "ospi.rootfs";
- reg = <0x800000 0x37c0000>;
- };
-
- partition@3fc0000 {
- bootph-pre-ram;
- label = "ospi.phypattern";
- reg = <0x3fc0000 0x40000>;
- };
- };
- };
-};
-
-&tlv320aic3106 {
- DVDD-supply = <&vcc_1v8>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts b/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts
new file mode 100644
index 0000000..055e63a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * AM6254atl SiP SK: https://www.ti.com/lit/df/sprr482b/sprr482b.zip
+ * Webpage: https://www.ti.com/tool/SK-AM62-SIP
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am6254atl.dtsi"
+#include "k3-am625-sk-common.dtsi"
+
+/ {
+ model = "Texas Instruments AM6254atl SK";
+ compatible = "ti,am6254atl-sk", "ti,am6254atl", "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi b/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi
new file mode 100644
index 0000000..976ad7d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DTS for AM625 SiP SoC family in Quad core configuration and 512MiB RAM.
+ *
+ * Webpage: https://www.ti.com/product/AM625SIP
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am625.dtsi"
+
+/ {
+ model = "Texas Instruments AM6254atl SiP";
+ compatible = "ti,am6254atl", "ti,am625";
+
+ memory@80000000 {
+ /* 512MiB of integrated RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x20000000>;
+ device_type = "memory";
+ bootph-all;
+ };
+
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 44e7e45..829f00a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -267,7 +267,7 @@ secure_proxy_sa3: mailbox@43600000 {
main_pmx0: pinctrl@f4000 {
compatible = "pinctrl-single";
- reg = <0x00 0xf4000 0x00 0x2ac>;
+ reg = <0x00 0xf4000 0x00 0x25c>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
@@ -804,6 +804,7 @@ mailbox0_cluster0: mailbox@29000000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster1: mailbox@29010000 {
@@ -813,6 +814,7 @@ mailbox0_cluster1: mailbox@29010000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster2: mailbox@29020000 {
@@ -822,6 +824,7 @@ mailbox0_cluster2: mailbox@29020000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
mailbox0_cluster3: mailbox@29030000 {
@@ -831,6 +834,7 @@ mailbox0_cluster3: mailbox@29030000 {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
+ status = "disabled";
};
main_mcan0: can@20701000 {
@@ -1054,6 +1058,9 @@ ti_csi2rx0: ticsi2rx@30102000 {
cdns_csi2rx0: csi-bridge@30101000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x30101000 0x00 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index ee961ce..d22caa7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -197,6 +197,7 @@ mcu_r5fss0_core0: r5f@79000000 {
ti,sci = <&dmsc>;
ti,sci-dev-id = <9>;
ti,sci-proc-ids = <0x03 0xff>;
+ status = "disabled";
};
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 5dc5d2cb..b3d012a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -45,7 +45,7 @@ memory@80000000 {
bootph-all;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -59,37 +59,13 @@ linux,cma {
linux,cma-default;
};
- c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99800000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@99900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99900000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b800000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b900000 0x00 0xf00000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ wkup_r5fss0_core0_memory_region: memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0xf00000>;
no-map;
@@ -200,11 +176,13 @@ AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */
};
};
-&c7x_0 {
- mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
- status = "okay";
+&a53_opp_table {
+ /* Requires VDD_CORE at 0v85 */
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ clock-latency-ns = <6000000>;
+ };
};
&cpsw3g {
@@ -237,33 +215,6 @@ &fss {
status = "okay";
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
@@ -379,26 +330,6 @@ &main_pktdma {
bootph-all;
};
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
- status = "reserved";
-};
-
-/* main_timer2 is used by C7x DSP */
-&main_timer2 {
- status = "reserved";
-};
-
-&mcu_r5fss0 {
- status = "okay";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
@@ -427,12 +358,4 @@ &sdhci0 {
status = "okay";
};
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
-};
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..950f4f3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62A SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ c7x_0_dma_memory_region: memory@99800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99800000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: memory@99900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: memory@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: memory@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ status = "okay";
+};
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+ status = "reserved";
+};
+
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+ status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 9ef1c82..23877da 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -127,6 +127,7 @@ wkup_r5fss0_core0: r5f@78000000 {
ti,sci = <&dmsc>;
ti,sci-dev-id = <121>;
ti,sci-proc-ids = <0x01 0xff>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index bceead5..af591fe 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -39,7 +39,7 @@ memory@80000000 {
bootph-all;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -53,37 +53,13 @@ linux,cma {
linux,cma-default;
};
- c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99800000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@99900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99900000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b800000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b900000 0x00 0xf00000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ wkup_r5fss0_core0_memory_region: memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0xf00000>;
no-map;
@@ -713,11 +689,6 @@ &main_uart1 {
status = "reserved";
};
-/* main_timer2 is used by C7x DSP */
-&main_timer2 {
- status = "reserved";
-};
-
&usbss0 {
status = "okay";
ti,vbus-divider;
@@ -734,6 +705,10 @@ usb0_hs_ep: endpoint {
};
};
+&usb0_phy_ctrl {
+ bootph-all;
+};
+
&usbss1 {
status = "okay";
};
@@ -835,65 +810,6 @@ &epwm1 {
status = "okay";
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
- status = "okay";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&c7x_0 {
- mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
- status = "okay";
-};
-
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
- status = "reserved";
-};
-
&fss {
status = "okay";
};
@@ -935,3 +851,5 @@ AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
>;
};
};
+
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
index daea18b..83af889 100644
--- a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
@@ -25,6 +25,7 @@ aliases {
rtc0 = &wkup_rtc0;
ethernet0 = &cpsw_port1;
ethernet1 = &cpsw_port2;
+ spi0 = &ospi0;
};
chosen {
@@ -39,7 +40,7 @@ memory@80000000 {
bootph-all;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -58,37 +59,13 @@ secure_tfa_ddr: tfa@80000000 {
no-map;
};
- c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99800000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@99900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99900000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b800000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b900000 0x00 0xf00000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ wkup_r5fss0_core0_memory_region: memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0xf00000>;
no-map;
@@ -100,7 +77,7 @@ secure_ddr: optee@9e800000 {
no-map;
};
- rtos_ipc_memory_region: ipc-memories@a0000000 {
+ rtos_ipc_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x01000000>;
no-map;
@@ -367,6 +344,32 @@ usr_led_pins_default: usr-led-default-pins {
AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
>;
};
+
+ main_usb1_pins_default: main-usb1-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (D19) USB1_DRVVBUS */
+ >;
+ };
+
+ ospi0_pins_default: ospi0-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */
+ AM62DX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */
+ AM62DX_IOPAD(0x0030, PIN_OUTPUT, 0) /* (G19) OSPI0_CSn1 */
+ AM62DX_IOPAD(0x0034, PIN_OUTPUT, 0) /* (K20) OSPI0_CSn2 */
+ AM62DX_IOPAD(0x0038, PIN_OUTPUT, 0) /* (G20) OSPI0_CSn3 */
+ AM62DX_IOPAD(0x000c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */
+ AM62DX_IOPAD(0x0010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */
+ AM62DX_IOPAD(0x0014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */
+ AM62DX_IOPAD(0x0018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */
+ AM62DX_IOPAD(0x001c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */
+ AM62DX_IOPAD(0x0020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */
+ AM62DX_IOPAD(0x0024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */
+ AM62DX_IOPAD(0x0028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+ AM62DX_IOPAD(0x0008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */
+ >;
+ bootph-all;
+ };
};
&mcu_gpio0 {
@@ -499,6 +502,11 @@ &main_uart0 {
status = "okay";
};
+&usbss0 {
+ status = "okay";
+ ti,vbus-divider;
+};
+
&usb0 {
usb-role-switch;
@@ -509,6 +517,16 @@ usb0_hs_ep: endpoint {
};
};
+&usbss1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_usb1_pins_default>;
+};
+
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&main_rgmii1_pins_default>,
@@ -551,65 +569,81 @@ cpsw3g_phy1: ethernet-phy@3 {
};
};
-&mailbox0_cluster0 {
+&fss {
status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
};
-&mailbox0_cluster1 {
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ospi0_pins_default>;
status = "okay";
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@80000 {
+ label = "ospi.tispl";
+ reg = <0x80000 0x200000>;
+ };
+
+ partition@280000 {
+ label = "ospi.u-boot";
+ reg = <0x280000 0x400000>;
+ };
+
+ partition@680000 {
+ label = "ospi.env";
+ reg = <0x680000 0x40000>;
+ };
+
+ partition@6c0000 {
+ label = "ospi.env.backup";
+ reg = <0x6c0000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ bootph-all;
+ };
+ };
};
};
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
bootph-pre-ram;
};
-&mcu_r5fss0 {
- status = "okay";
-};
-
&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
firmware-name = "am62d-mcu-r5f0_0-fw";
- status = "okay";
};
&c7x_0 {
- mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
firmware-name = "am62d-c71_0-fw";
- status = "okay";
};
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
- status = "reserved";
-};
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 2e5e25a..0c05bcf 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -576,15 +576,12 @@ sdhci0: mmc@fa10000 {
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- mmc-hs400-1_8v;
ti,clkbuf-sel = <0x7>;
- ti,strobe-sel = <0x77>;
ti,trm-icp = <0x8>;
ti,otap-del-sel-legacy = <0x1>;
ti,otap-del-sel-mmc-hs = <0x1>;
ti,otap-del-sel-ddr52 = <0x6>;
ti,otap-del-sel-hs200 = <0x8>;
- ti,otap-del-sel-hs400 = <0x5>;
ti,itap-del-sel-legacy = <0x10>;
ti,itap-del-sel-mmc-hs = <0xa>;
ti,itap-del-sel-ddr52 = <0x3>;
@@ -1045,6 +1042,9 @@ ti_csi2rx0: ticsi2rx@30102000 {
cdns_csi2rx0: csi-bridge@30101000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x30101000 0x00 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index bd6a00d..5288c959 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -205,6 +205,7 @@ mcu_r5fss0_core0: r5f@79000000 {
ti,atcm-enable = <0>;
ti,btcm-enable = <1>;
ti,loczrama = <0>;
+ status = "disabled";
};
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
index 6757b37..8612b45 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -136,6 +136,7 @@ wkup_r5fss0_core0: r5f@78000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 6aea9d3..908cc07 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -74,3 +74,9 @@ &main_gpio1 {
gpio-reserved-ranges = <32 10>;
ti,ngpio = <52>;
};
+
+&sdhci0 {
+ mmc-hs400-1_8v;
+ ti,strobe-sel = <0x66>;
+ ti,otap-del-sel-hs400 = <0x5>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..d29a5db
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62P SoCs
+ *
+ * Copyright (C) 2023-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_r5fss0_core0_dma_memory_region: memory@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: memory@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
index a2fdc674..9981004 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
@@ -147,7 +147,7 @@ reg_vsodimm: regulator-vsodimm {
regulator-name = "+V_SODIMM";
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -162,7 +162,13 @@ secure_ddr: optee@9e800000 {
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0x01e00000>;
no-map;
@@ -830,24 +836,6 @@ &epwm2 {
status = "disabled";
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
&main0_alert {
temperature = <95000>;
};
@@ -1426,3 +1414,5 @@ &wkup_uart0 {
uart-has-rtscts;
status = "disabled";
};
+
+#include "k3-am62p-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 899da78..a064a63 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -44,30 +44,18 @@ memory@80000000 {
bootph-pre-ram;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b800000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b900000 0x00 0xf00000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+ wkup_r5fss0_core0_memory_region: memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0xf00000>;
no-map;
@@ -360,7 +348,7 @@ AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */
main_usb1_pins_default: main-usb1-default-pins {
pinctrl-single,pins = <
- AM62PX_IOPAD(0x0258, PIN_INPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (G21) USB1_DRVVBUS */
+ AM62PX_IOPAD(0x0258, PIN_INPUT, 0) /* (G21) USB1_DRVVBUS */
>;
};
@@ -607,6 +595,10 @@ usb0_hs_ep: endpoint {
};
};
+&usb0_phy_ctrl {
+ bootph-all;
+};
+
&usb1 {
dr_mode = "host";
pinctrl-names = "default";
@@ -699,44 +691,6 @@ partition@3fc0000 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
- status = "okay";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
@@ -808,3 +762,5 @@ &epwm1 {
pinctrl-0 = <&main_epwm1_pins_default>;
status = "okay";
};
+
+#include "k3-am62p-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
new file mode 100644
index 0000000..4bb92fd
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Variscite Symphony carrier board for VAR-SOM-AM62P
+ *
+ * Link: https://www.variscite.it/product/single-board-computers/symphony-board/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5-var-som.dtsi"
+
+/ {
+ model = "Variscite VAR-SOM-AM62P on Symphony-Board";
+ compatible = "variscite,var-som-am62p-symphony", "variscite,var-som-am62p", "ti,am62p5";
+
+ aliases {
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ mmc2 = &sdhci2;
+ serial0 = &main_uart0;
+ serial2 = &main_uart2;
+ serial5 = &main_uart5;
+ serial6 = &main_uart6;
+ spi5 = &main_spi2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clk_ov5640_fixed: clock-24000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+ };
+
+ button-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+ };
+
+ button-menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-heartbeat {
+ label = "Heartbeat";
+ linux,default-trigger = "heartbeat";
+ gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_2p8v: regulator-2p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_1p5v: regulator-1p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ };
+
+ reg_sdhc1_vmmc: regulator-sdhc1 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_SD";
+ vin-supply = <®_sdhc1_vmmc_int>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ reg_sdhc1_vmmc_int: regulator-sdhc1-int {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_SD_INT";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_vmmc>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&main_gpio0 53 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+ compatible = "regulator-gpio";
+ regulator-name = "+V3.3_SD_VQMMC";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_vqmmc>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpios = <&main_gpio0 56 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ bootph-all;
+ };
+
+ reg_ov5640_buf_en: regulator-camera-buf-en {
+ compatible = "regulator-fixed";
+ regulator-name = "ov5640_buf_en";
+ gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ transceiver1: can-phy {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_extcon>;
+ label = "USB-C";
+ id-gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ usb_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+ };
+};
+
+&cdns_csi2rx0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "okay";
+
+ csi2rx0_in_sensor: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ bus-type = <4>; /* CSI2 DPHY. */
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>,
+ <&pinctrl_rgmii2>;
+ status = "okay";
+};
+
+&cpsw3g_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio1>;
+ status = "okay";
+
+ cpsw3g_phy1: ethernet-phy@5 {
+ compatible = "ethernet-phy-id0283.bc30";
+ reg = <5>;
+ reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+ };
+};
+
+&cpsw_port2 {
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the Symphony PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <&cpsw3g_phy1>;
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
+
+&main_i2c0{
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+ AVDD-supply = <®_2p8v>;
+ DOVDD-supply = <®_1p8v>;
+ DVDD-supply = <®_1p5v>;
+ powerdown-gpios = <&main_gpio0 10 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2rx0_in_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+ /* GPIO expander */
+ pca9534: gpio@20 {
+ compatible = "nxp,pca9534";
+ reg = <0x20>;
+ gpio-controller;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9534>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+ #gpio-cells = <2>;
+ status = "okay";
+
+ usb3-sel-hog {
+ gpio-hog;
+ gpios = <4 0>;
+ output-low;
+ line-name = "usb3_sel";
+ };
+
+ eth-som-vselect-hog {
+ gpio-hog;
+ gpios = <6 0>;
+ output-low;
+ line-name = "eth-vselect";
+ };
+
+ eth-mdio-enable-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ output-high;
+ line-name = "eth-mdio-enable";
+ };
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mcan0>;
+ phys = <&transceiver1>;
+ status = "okay";
+};
+
+&main_pmx0 {
+ pinctrl_extcon: main-extcon-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */
+ >;
+ };
+
+ pinctrl_i2c0: main-i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */
+ AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */
+ >;
+ };
+
+ pinctrl_i2c1: main-i2c1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
+ AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_mcan0: main-mcan0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01dc, PIN_INPUT, 0) /* (F20) MCAN0_RX */
+ AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */
+ >;
+ };
+
+ pinctrl_mmc1: main-mmc1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */
+ AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */
+ AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */
+ AM62PX_IOPAD(0x022c, PIN_INPUT, 0) /* (H23) MMC1_DAT1 */
+ AM62PX_IOPAD(0x0228, PIN_INPUT, 0) /* (H22) MMC1_DAT2 */
+ AM62PX_IOPAD(0x0224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */
+ AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_rgmii2: main-rgmii2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */
+ AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */
+ AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */
+ AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */
+ AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */
+ AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */
+ AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */
+ AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */
+ AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */
+ AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */
+ AM62PX_IOPAD(0x0168, PIN_INPUT_PULLDOWN, 0) /* (D16) RGMII2_TXC */
+ AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */
+ >;
+ };
+
+ pinctrl_spi2: main-spi2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01b0, PIN_INPUT, 1) /* (G20) MCASP0_ACLKR.SPI2_CLK */
+ AM62PX_IOPAD(0x0194, PIN_OUTPUT, 1) /* (D25) MCASP0_AXR3.SPI2_D0 */
+ AM62PX_IOPAD(0x0198, PIN_INPUT, 1) /* (E25) MCASP0_AXR2.SPI2_D1 */
+ AM62PX_IOPAD(0x01ac, PIN_OUTPUT, 7) /* (G23) MCASP0_AFSR.GPIO1_13 */
+ >;
+ };
+
+ pinctrl_uart0: main-uart0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */
+ AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_uart2: main-uart2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x005c, PIN_INPUT_PULLUP, 2) /* (AC25) GPMC0_AD8.UART2_RXD */
+ AM62PX_IOPAD(0x0060, PIN_OUTPUT, 2) /* (AB25) GPMC0_AD9.UART2_TXD */
+ >;
+ };
+
+ pinctrl_uart6: main-uart6-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x009c, PIN_INPUT_PULLUP, 3) /* (AD24) GPMC0_WAIT1.UART6_RXD */
+ AM62PX_IOPAD(0x0244, PIN_OUTPUT, 1) /* (D24) MMC1_SDWP.UART6_TXD */
+ >;
+ };
+
+ pinctrl_usb1: main-usb1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */
+ >;
+ };
+
+ pinctrl_ov5640: main-ov5640-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0028, PIN_OUTPUT, 7) /* (N20) OSPI0_D7.GPIO0_10 */
+ AM62PX_IOPAD(0x0054, PIN_OUTPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */
+ AM62PX_IOPAD(0x0058, PIN_OUTPUT, 7) /* (W25) GPMC0_AD7.GPIO0_22 */
+ >;
+ };
+
+ pinctrl_pca9534: main-pca9534-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01f0, PIN_INPUT, 7) /* (C25) EXT_REFCLK1.GPIO1_30 */
+ >;
+ };
+
+ pinctrl_sd1_vmmc: main-sd1-vmmc-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */
+ AM62PX_IOPAD(0x00d8, PIN_OUTPUT, 7) /* (AE22) VOUT0_DATA8.GPIO0_53 */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_sd1_vqmmc: main-sd1-vqmmc-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (AE21) VOUT0_DATA11.GPIO0_56 */
+ >;
+ bootph-all;
+ };
+};
+
+&main_spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ ti,pindir-d0-out-d1-in;
+ cs-gpios = <&main_gpio1 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&main_uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&main_uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&sdhci1 {
+ /* SD Card */
+ vmmc-supply = <®_sdhc1_vmmc>;
+ vqmmc-supply = <®_sdhc1_vqmmc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1>;
+ disable-wp;
+ bootph-all;
+ status="okay";
+};
+
+&ti_csi2rx0 {
+ status = "okay";
+};
+
+&usb0 {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ status = "okay";
+};
+
+&usbss0 {
+ status = "okay";
+};
+
+&usbss1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
new file mode 100644
index 0000000..edaa4f9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common dtsi for Variscite VAR-SOM-AM62P
+ *
+ * Link: https://www.variscite.com/product/system-on-module-som/cortex-a53-krait/var-som-am62p-ti-sitara-am62px/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-am62p5.dtsi"
+
+/ {
+ compatible = "variscite,var-som-am62p", "ti,am62p5";
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <10000>;
+ reset-gpios = <&main_gpio0 54 GPIO_ACTIVE_LOW>, /* WIFI_PWR_EN */
+ <&main_gpio0 59 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ };
+
+ mmc_pwrseq: mmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc_pwrseq>;
+ reset-gpios = <&main_gpio0 49 GPIO_ACTIVE_LOW>;
+ };
+
+ memory@80000000 {
+ /* 8G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000001 0x80000000>;
+ device_type = "memory";
+ bootph-pre-ram;
+ };
+
+ opp-table {
+ /* Add 1.4GHz OPP for am62p5-sk board. Requires VDD_CORE at 0v85 */
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ clock-latency-ns = <6000000>;
+ };
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rtos_ipc_memory_region: rtos-ipc-memory@9b500000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b500000 0x00 0x00300000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x00100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0x00f00000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x00100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0x01e00000>;
+ no-map;
+ };
+
+ secure_tfa_ddr: tfa@9e780000 {
+ reg = <0x00 0x9e780000 0x00 0x80000>;
+ no-map;
+ };
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+ no-map;
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "On-module +V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "On-module +V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_3v3>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3v3_phy: regulator-3v3-phy {
+ compatible = "regulator-fixed";
+ regulator-name = "On-module +V3.3_PHY";
+ gpios = <&main_gpio0 45 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>;
+};
+
+&cpsw3g_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio1>;
+ status = "okay";
+
+ cpsw3g_phy0: ethernet-phy@4 {
+ compatible = "ethernet-phy-id0283.bc30";
+ reg = <4>;
+ reset-gpios = <&main_gpio0 46 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+ };
+};
+
+&cpsw_port1 {
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <&cpsw3g_phy0>;
+ status = "okay";
+};
+
+&main_i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&main_pmx0 {
+ pinctrl_mmc_pwrseq: main-emmc-pwrseq-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */
+ >;
+ };
+
+ pinctrl_i2c2: main-i2c2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
+ AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
+ >;
+ };
+
+ pinctrl_i2c3: main-i2c3-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */
+ AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */
+ >;
+ };
+
+ pinctrl_mdio1: main-mdio1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
+ AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
+ >;
+ };
+
+ pinctrl_mmc2: main-mmc2-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x0120, PIN_INPUT_PULLUP, 0) /* (K24) MMC2_CMD */
+ AM62PX_IOPAD(0x0118, PIN_INPUT_PULLDOWN, 0) /* (K21) MMC2_CLK */
+ AM62PX_IOPAD(0x011c, PIN_INPUT_PULLUP, 0) /* () MMC2_CLKLB */
+ AM62PX_IOPAD(0x0114, PIN_INPUT_PULLUP, 0) /* (K23) MMC2_DAT0 */
+ AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */
+ AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */
+ AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */
+ >;
+ };
+
+ pinctrl_rgmii1: main-rgmii1-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */
+ AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */
+ AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */
+ AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */
+ AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */
+ AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */
+ AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */
+ AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */
+ AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */
+ AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */
+ AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */
+ AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */
+ >;
+ bootph-all;
+ };
+
+ pinctrl_spi0: main-spi0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (B21) SPI0_CLK */
+ AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 0) /* (D20) SPI0_CS0 */
+ AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0 */
+ AM62PX_IOPAD(0x01c4, PIN_INPUT, 0) /* (C21) SPI0_D1 */
+ >;
+ };
+
+ pinctrl_uart5: main-uart5-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00ec, PIN_INPUT, 4) /* (AC21) VOUT0_DATA13.UART5_CTSn */
+ AM62PX_IOPAD(0x00e8, PIN_OUTPUT, 4) /* (AD21) VOUT0_DATA12.UART5_RTSn */
+ AM62PX_IOPAD(0x00d0, PIN_INPUT, 4) /* (AC23) VOUT0_DATA6.UART5_RXD */
+ AM62PX_IOPAD(0x00d4, PIN_OUTPUT, 4) /* (AE23) VOUT0_DATA7.UART5_TXD */
+ >;
+ };
+
+ pinctrl_bt: main-btgrp-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00f4, PIN_OUTPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 (BT_EN) */
+ >;
+ };
+
+ pinctrl_restouch: main-restouch-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00c4, PIN_INPUT_PULLUP, 7) /* (Y23) VOUT0_DATA3.GPIO0_48 */
+ >;
+ };
+
+ pinctrl_wifi: main-wifi-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 7) /* (AC22) VOUT0_DATA9.GPIO0_54 - WIFI_PWR_EN - */
+ AM62PX_IOPAD(0x00f0, PIN_OUTPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 - WIFI_EN - */
+ >;
+ };
+};
+
+&mcu_pmx0 {
+ pinctrl_wkup_clkout0: wkup-clkout0-default-pins {
+ pinctrl-single,pins = <
+ AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */
+ >;
+ };
+};
+
+&main_spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ ti,pindir-d0-out-d1-in;
+ status = "okay";
+};
+
+&main_uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+&sdhci0 {
+ /* On-module eMMC */
+ ti,driver-strength-ohm = <50>;
+ mmc-pwrseq = <&mmc_pwrseq>;
+ bootph-all;
+ status = "okay";
+};
+
+&sdhci2 {
+ /* On-module WiFi */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc2>, <&pinctrl_wifi>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ ti,fails-without-test-cd;
+ status = "okay";
+};
+
+&usbss0 {
+ ti,vbus-divider;
+};
+
+&usbss1 {
+ ti,vbus-divider;
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+ status = "reserved";
+};
+
+&mcu_gpio_intr {
+ status = "reserved";
+};
+
+&wkup_rtc0 {
+ status = "disabled";
+};
+
+&wkup_rti0 {
+ /* WKUP RTI0 is used by DM firmware */
+ status = "reserved";
+};
+
+&wkup_uart0 {
+ /* WKUP UART0 is used by DM firmware */
+ status = "reserved";
+};
+
+&main_uart1 {
+ /* Main UART1 is used by TIFS firmware */
+ status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 13e1d36..58f78c0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -8,7 +8,6 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
-#include "k3-am625.dtsi"
/ {
aliases {
@@ -29,14 +28,7 @@ chosen {
stdout-path = "serial2:115200n8";
};
- memory@80000000 {
- bootph-pre-ram;
- device_type = "memory";
- /* 2G RAM */
- reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
- };
-
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -58,25 +50,13 @@ linux,cma {
linux,cma-default;
};
- mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cb00000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@9cc00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cc00000 0x00 0xe00000>;
- no-map;
- };
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9da00000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+ wkup_r5fss0_core0_memory_region: memory@9db00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9db00000 0x00 0xc00000>;
no-map;
@@ -249,7 +229,7 @@ AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
main_usb1_pins_default: main-usb1-default-pins {
pinctrl-single,pins = <
- AM62X_IOPAD(0x0258, PIN_OUTPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (F18/E16) USB1_DRVVBUS */
+ AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
>;
};
@@ -477,37 +457,6 @@ cpsw3g_phy0: ethernet-phy@0 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
-};
-
&usbss0 {
bootph-all;
status = "okay";
@@ -530,6 +479,10 @@ usb0_hs_ep: endpoint {
};
};
+&usb0_phy_ctrl {
+ bootph-all;
+};
+
&usb1 {
dr_mode = "host";
pinctrl-names = "default";
@@ -600,3 +553,5 @@ &epwm1 {
pinctrl-0 = <&main_epwm1_pins_default>;
status = "okay";
};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index c7e5da3..d872cc6 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -921,6 +921,7 @@ main_r5fss0: r5fss@78000000 {
<0x78200000 0x00 0x78200000 0x08000>,
<0x78300000 0x00 0x78300000 0x08000>;
power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss0_core0: r5f@78000000 {
compatible = "ti,am64-r5f";
@@ -935,6 +936,7 @@ main_r5fss0_core0: r5f@78000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss0_core1: r5f@78200000 {
@@ -950,6 +952,7 @@ main_r5fss0_core1: r5f@78200000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -963,6 +966,7 @@ main_r5fss1: r5fss@78400000 {
<0x78600000 0x00 0x78600000 0x08000>,
<0x78700000 0x00 0x78700000 0x08000>;
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss1_core0: r5f@78400000 {
compatible = "ti,am64-r5f";
@@ -977,6 +981,7 @@ main_r5fss1_core0: r5f@78400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss1_core1: r5f@78600000 {
@@ -992,6 +997,7 @@ main_r5fss1_core1: r5f@78600000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index d9d491b..02ef1dd9 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -41,71 +41,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ main_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ main_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a5000000 {
- reg = <0x00 0xa5000000 0x00 0x00800000>;
- alignment = <0x1000>;
- no-map;
- };
};
leds {
@@ -238,43 +184,6 @@ &cpsw_port1 {
status = "okay";
};
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster6 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-};
-
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
@@ -349,37 +258,6 @@ &main_pktdma {
bootph-all;
};
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
@@ -415,3 +293,5 @@ adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..6b10646
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM64 SoCs
+ *
+ * Copyright (C) 2024-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ main_r5fss0_core1_dma_memory_region: memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_m4fss_dma_memory_region: memory@a4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_m4fss_memory_region: memory@a4100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: memory@a5000000 {
+ reg = <0x00 0xa5000000 0x00 0x00800000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 2>;
+ ti,mbox-tx = <1 0 2>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 2>;
+ ti,mbox-tx = <3 0 2>;
+ };
+};
+
+&mailbox0_cluster4 {
+ status = "okay";
+
+ mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+ ti,mbox-rx = <0 0 2>;
+ ti,mbox-tx = <1 0 2>;
+ };
+
+ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+ ti,mbox-rx = <2 0 2>;
+ ti,mbox-tx = <3 0 2>;
+ };
+};
+
+&mailbox0_cluster6 {
+ status = "okay";
+
+ mbox_m4_0: mbox-m4-0 {
+ ti,mbox-rx = <0 0 2>;
+ ti,mbox-tx = <1 0 2>;
+ };
+};
+
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+ status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+ status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+ status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+ status = "reserved";
+};
+
+&main_r5fss0 {
+ status = "okay";
+};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss1 {
+ status = "okay";
+};
+
+&main_r5fss1_core0 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss1_core1 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+ status = "okay";
+};
+
+&mcu_m4fss {
+ mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
+ memory-region = <&mcu_m4fss_dma_memory_region>,
+ <&mcu_m4fss_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index e018663..85dcff1 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -42,7 +42,7 @@ memory@80000000 {
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -53,71 +53,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ main_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ main_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a5000000 {
- reg = <0x00 0xa5000000 0x00 0x00800000>;
- alignment = <0x1000>;
- no-map;
- };
};
evm_12v0: regulator-0 {
@@ -727,94 +673,6 @@ partition@3fc0000 {
};
};
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster6 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
-/* main_timer8 is used by r5f0-0 */
-&main_timer8 {
- status = "reserved";
-};
-
-/* main_timer9 is used by r5f0-1 */
-&main_timer9 {
- status = "reserved";
-};
-
-/* main_timer10 is used by r5f1-0 */
-&main_timer10 {
- status = "reserved";
-};
-
-/* main_timer11 is used by r5f1-1 */
-&main_timer11 {
- status = "reserved";
-};
-
&serdes_ln_ctrl {
idle-states = <AM64_SERDES0_LANE0_PCIE0>;
};
@@ -878,3 +736,5 @@ &icssg1_iep0 {
pinctrl-names = "default";
pinctrl-0 = <&icssg1_iep0_pins_default>;
};
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
new file mode 100644
index 0000000..7fc73cf
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83869.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ aliases {
+ ethernet3 = "/icssg1-ethernet/ethernet-ports/port@0";
+ ethernet4 = "/icssg1-ethernet/ethernet-ports/port@1";
+ };
+
+ icssg1-ethernet {
+ compatible = "ti,am642-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>;
+
+ dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
+ <&main_pktdma 0xc201 15>, /* egress slice 0 */
+ <&main_pktdma 0xc202 15>, /* egress slice 0 */
+ <&main_pktdma 0xc203 15>, /* egress slice 0 */
+ <&main_pktdma 0xc204 15>, /* egress slice 1 */
+ <&main_pktdma 0xc205 15>, /* egress slice 1 */
+ <&main_pktdma 0xc206 15>, /* egress slice 1 */
+ <&main_pktdma 0xc207 15>, /* egress slice 1 */
+ <&main_pktdma 0x4200 15>, /* ingress slice 0 */
+ <&main_pktdma 0x4201 15>, /* ingress slice 1 */
+ <&main_pktdma 0x4202 0>, /* mgmnt rsp slice 0 */
+ <&main_pktdma 0x4203 0>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1",
+ "rxmgm0", "rxmgm1";
+
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ interrupt-parent = <&icssg1_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+ sram = <&oc_sram>;
+
+ ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+ ti,mii-g-rt = <&icssg1_mii_g_rt>;
+ ti,mii-rt = <&icssg1_mii_rt>;
+ ti,pa-stats = <&icssg1_pa_stats>;
+ ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg1_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg1_phy1>;
+ phy-mode = "rgmii-id";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ ti,syscon-rgmii-delay = <&main_conf 0x4110>;
+ };
+
+ icssg1_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg1_phy2>;
+ phy-mode = "rgmii-id";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ ti,syscon-rgmii-delay = <&main_conf 0x4114>;
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+ icssg1_mdio_pins_default: icssg1-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */
+ AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA6) PRG1_MDIO0_MDIO */
+ >;
+ };
+
+ icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+ AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+ AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+ AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+ AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+ AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+ AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
+ AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
+ AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
+ AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
+ AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
+ AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+ >;
+ };
+
+ icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+ AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+ AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+ AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+ AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+ AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+ AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.PRG1_RGMII2_TD0 */
+ AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.PRG1_RGMII2_TD1 */
+ AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.PRG1_RGMII2_TD2 */
+ AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.PRG1_RGMII2_TD3 */
+ AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.PRG1_RGMII2_TX_CTL */
+ AM64X_IOPAD(0x0148, PIN_INPUT, 2) /* (Y10) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+ >;
+ };
+};
+
+&icssg1_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ icssg1_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-internal-delay-ps = <2000>;
+ tx-internal-delay-ps = <2000>;
+ ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+ ti,min-output-impedance;
+ };
+
+ icssg1_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ rx-internal-delay-ps = <2000>;
+ tx-internal-delay-ps = <2000>;
+ ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+ ti,min-output-impedance;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 129524e..e4afa8c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -100,6 +100,7 @@ ethernet {
ti,mii-g-rt = <&icssg0_mii_g_rt>;
ti,mii-rt = <&icssg0_mii_rt>;
ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+ ti,pa-stats = <&icssg0_pa_stats>;
ethernet-ports {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1deaa0b..1fb1b91 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -40,7 +40,7 @@ memory@80000000 {
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -51,71 +51,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ main_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ main_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a5000000 {
- reg = <0x00 0xa5000000 0x00 0x00800000>;
- alignment = <0x1000>;
- no-map;
- };
};
vusb_main: regulator-0 {
@@ -642,94 +588,6 @@ partition@3fc0000 {
};
};
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster6 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
-/* main_timer8 is used by r5f0-0 */
-&main_timer8 {
- status = "reserved";
-};
-
-/* main_timer9 is used by r5f0-1 */
-&main_timer9 {
- status = "reserved";
-};
-
-/* main_timer10 is used by r5f1-0 */
-&main_timer10 {
- status = "reserved";
-};
-
-/* main_timer11 is used by r5f1-1 */
-&main_timer11 {
- status = "reserved";
-};
-
&ecap0 {
status = "okay";
/* PWM is available on Pin 1 of header J3 */
@@ -743,3 +601,5 @@ &eqep0 {
pinctrl-names = "default";
pinctrl-0 = <&main_eqep0_pins_default>;
};
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
index a5cec9a..fcbcc04 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
@@ -105,7 +105,7 @@ memory@80000000 {
device_type = "memory";
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -115,53 +115,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ main_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ main_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
};
vdd_mmc0: regulator-vdd-mmc0 {
@@ -263,34 +227,6 @@ ethernet_phy2: ethernet-phy@f {
};
};
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_default_pins>;
@@ -488,30 +424,6 @@ AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* USB0_DRVVBUS.USB0_DRVVBUS */
};
};
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
/* SoC default UART console */
&main_uart0 {
pinctrl-names = "default";
@@ -590,3 +502,5 @@ &usbss0 {
ti,vbus-divider;
ti,usb2-only;
};
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index 828d815..ff3b2e0 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -20,7 +20,7 @@ memory@80000000 {
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -31,59 +31,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ main_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ main_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a5000000 {
- reg = <0x00 0xa5000000 0x00 0x00800000>;
- alignment = <0x1000>;
- no-map;
- };
};
reg_1v8: regulator-1v8 {
@@ -130,67 +88,6 @@ eeprom1: eeprom@54 {
};
};
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 2>;
- ti,mbox-tx = <3 0 2>;
- };
-};
-
-&mailbox0_cluster6 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 2>;
- ti,mbox-tx = <1 0 2>;
- };
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
&ospi0 {
status = "okay";
pinctrl-names = "default";
@@ -264,3 +161,5 @@ AM64X_IOPAD(0x0008, PIN_INPUT, 0)
>;
};
};
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index e5136ed..42ba3da 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -36,7 +36,7 @@ chosen {
stdout-path = "serial3:115200n8";
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -47,36 +47,18 @@ secure_ddr: secure-ddr@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0 0xa0000000 0 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0 0xa0100000 0 0xf00000>;
no-map;
};
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1000000 0 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1100000 0 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a2000000 {
- reg = <0x00 0xa2000000 0x00 0x00200000>;
- alignment = <0x1000>;
- no-map;
- };
-
/* To reserve the power-on(PON) reason for watchdog reset */
wdt_reset_memory_region: wdt-memory@a2200000 {
reg = <0x00 0xa2200000 0x00 0x1000>;
@@ -582,38 +564,6 @@ &pcie1_rc {
reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
-};
-
&mcu_rti1 {
memory-region = <&wdt_reset_memory_region>;
};
@@ -686,3 +636,9 @@ &mcu_r5fss0 {
/* lock-step mode not supported on iot2050 boards */
ti,cluster-mode = <0>;
};
+
+#include "k3-am65-ti-ipc-firmware.dtsi"
+
+&rtos_ipc_memory_region {
+ reg = <0x00 0xa2000000 0x00 0x00200000>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 7cf1f64..f6d9a57 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -408,6 +408,7 @@ mcu_r5fss0: r5fss@41000000 {
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
mcu_r5fss0_core0: r5f@41000000 {
compatible = "ti,am654-r5f";
@@ -422,6 +423,7 @@ mcu_r5fss0_core0: r5f@41000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
mcu_r5fss0_core1: r5f@41400000 {
@@ -437,6 +439,7 @@ mcu_r5fss0_core1: r5f@41400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..61ab035
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM65 SoCs
+ *
+ * Copyright (C) 2016-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa1000000 0 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa1100000 0 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: memory@a2000000 {
+ reg = <0x00 0xa2000000 0x00 0x00100000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-tx = <1 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+ interrupts = <432>;
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-tx = <1 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index e589690..0c42c48 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -39,7 +39,7 @@ memory@80000000 {
<0x00000008 0x80000000 0x00000000 0x80000000>;
};
- reserved-memory {
+ reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -50,35 +50,17 @@ secure_ddr: secure-ddr@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0 0xa0000000 0 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0 0xa0100000 0 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1000000 0 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0 0xa1100000 0 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a2000000 {
- reg = <0x00 0xa2000000 0x00 0x00100000>;
- alignment = <0x1000>;
- no-map;
- };
};
gpio-keys {
@@ -521,38 +503,6 @@ &serdes1 {
status = "disabled";
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-tx = <1 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
-};
-
&ospi0 {
status = "okay";
pinctrl-names = "default";
@@ -647,3 +597,5 @@ &dss {
&wkup_gpio0 {
bootph-all;
};
+
+#include "k3-am65-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
index b829f4b..adf4da7d 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
@@ -145,7 +145,7 @@ &main_spi0 {
pinctrl-0 = <&main_spi0_pins>;
#address-cells = <1>;
- #size-cells= <0>;
+ #size-cells = <0>;
};
&mcu_spi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index bf9b23d..b697035 100644
--- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -50,71 +50,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ wkup_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- c7x_1_memory_region: c7x-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a5000000 {
- reg = <0x00 0xa5000000 0x00 0x1c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
vsys_5v0: regulator-1 {
@@ -453,100 +399,4 @@ &sdhci1 {
status = "okay";
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_wkup_r5_0: mbox-wkup-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- status = "okay";
-
- mbox_main_r5_0: mbox-main-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c7x_1: mbox-c7x-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
- status = "okay";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0 {
- status = "okay";
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&c7x_0 {
- mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
- status = "okay";
-};
-
-&c7x_1 {
- mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
- memory-region = <&c7x_1_dma_memory_region>,
- <&c7x_1_memory_region>;
- status = "okay";
-};
+#include "k3-j722s-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
index fd715fe..adef02b 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
@@ -49,107 +49,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_1_dma_memory_region: c71-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- c71_1_memory_region: c71-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a8000000 {
- reg = <0x00 0xa8000000 0x00 0x01c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
vdd_sd_dv: regulator-sd {
@@ -243,80 +153,6 @@ J721S2_WKUP_IOPAD(0x09c, PIN_INPUT_PULLUP, 0) /* (H27) WKUP_I2C0_SDA */
};
};
-&c71_0 {
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
- status = "okay";
-};
-
-&c71_1 {
- mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
- memory-region = <&c71_1_dma_memory_region>,
- <&c71_1_memory_region>;
- status = "okay";
-};
-
-&mailbox0_cluster0 {
- interrupts = <436>;
- status = "okay";
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- interrupts = <432>;
- status = "okay";
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- interrupts = <428>;
- status = "okay";
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- interrupts = <420>;
- status = "okay";
-
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c71_1: mbox-c71-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
&main_cpsw {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins_default>;
@@ -367,30 +203,6 @@ &main_gpio0 {
status = "okay";
};
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
/* eMMC */
&main_sdhci0 {
non-removable;
@@ -405,51 +217,6 @@ &main_sdhci1 {
bootph-all;
};
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_timer3 {
- status = "reserved";
-};
-
-&main_timer4 {
- status = "reserved";
-};
-
-&main_timer5 {
- status = "reserved";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
@@ -599,3 +366,5 @@ som_eeprom_opt: eeprom@51 {
pagesize = <32>;
};
};
+
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index e84c504..75a1074 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -135,6 +135,34 @@ transceiver4: can-phy3 {
max-bitrate = <5000000>;
};
+ edp0_refclk: clock-edp0-refclk {
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ #clock-cells = <0>;
+ };
+
+ dp0_pwr_3v3: regulator-dp0-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "dp0-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; /*P0 - DP0_3V3 _EN */
+ enable-active-high;
+ };
+
+ dp0: dp0-connector {
+ compatible = "dp-connector";
+ label = "DP0";
+ type = "full-size";
+ dp-pwr-supply = <&dp0_pwr_3v3>;
+
+ port {
+ dp0_connector_in: endpoint {
+ remote-endpoint = <&dp0_out>;
+ };
+ };
+ };
+
connector-hdmi {
compatible = "hdmi-connector";
label = "hdmi";
@@ -615,6 +643,39 @@ exp2: gpio@20 {
gpio-line-names = "HDMI_PDn","HDMI_LS_OE",
"DP0_3V3_EN","eDP_ENABLE";
};
+
+ bridge_dsi_edp: bridge-dsi-edp@2c {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+ clock-names = "refclk";
+ clocks = <&edp0_refclk>;
+ enable-gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+ vpll-supply = <&vsys_io_1v8>;
+ vccio-supply = <&vsys_io_1v8>;
+ vcca-supply = <&vsys_io_1v2>;
+ vcc-supply = <&vsys_io_1v2>;
+
+ dsi_edp_bridge_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dp0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dp0_out: endpoint {
+ remote-endpoint = <&dp0_connector_in>;
+ };
+ };
+ };
+ };
};
&main_sdhci1 {
@@ -711,6 +772,15 @@ dpi_out0: endpoint {
remote-endpoint = <&tfp410_in>;
};
};
+
+ /* DSI */
+ port@2 {
+ reg = <2>;
+
+ dpi0_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
};
&serdes_ln_ctrl {
@@ -768,3 +838,30 @@ &usb0 {
phys = <&serdes0_usb_link>;
phy-names = "cdns3,usb3-phy";
};
+
+&dphy_tx0 {
+ status = "okay";
+};
+
+&dsi0 {
+ status = "okay";
+};
+
+&dsi0_ports {
+
+ port@0 {
+ reg = <0>;
+
+ dsi0_out: endpoint {
+ remote-endpoint = <&dp0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
index 4ca2d4e..6a6dc81 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -27,107 +27,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_1_dma_memory_region: c71-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- c71_1_memory_region: c71-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a8000000 {
- reg = <0x00 0xa8000000 0x00 0x01c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
};
@@ -235,141 +145,4 @@ partition@3fc0000 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
- interrupts = <428>;
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
- interrupts = <420>;
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c71_1: mbox-c71-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_timer3 {
- status = "reserved";
-};
-
-&main_timer4 {
- status = "reserved";
-};
-
-&main_timer5 {
- status = "reserved";
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&c71_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
-};
-
-&c71_1 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
- memory-region = <&c71_1_dma_memory_region>,
- <&c71_1_memory_region>;
-};
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 612ac27..5896e57 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -49,149 +49,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a8000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a8100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_1_dma_memory_region: c71-dma-memory@a9000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa9000000 0x00 0x100000>;
- no-map;
- };
-
- c71_1_memory_region: c71-memory@a9100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa9100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_2_dma_memory_region: c71-dma-memory@aa000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xaa000000 0x00 0x100000>;
- no-map;
- };
-
- c71_2_memory_region: c71-memory@aa100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xaa100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_3_dma_memory_region: c71-dma-memory@ab000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xab000000 0x00 0x100000>;
- no-map;
- };
-
- c71_3_memory_region: c71-memory@ab100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xab100000 0x00 0xf00000>;
- no-map;
- };
};
vusb_main: regulator-vusb-main5v0 {
@@ -640,90 +508,6 @@ &phy_gmii_sel {
bootph-all;
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
- interrupts = <428>;
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- status = "okay";
- interrupts = <424>;
- mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
- interrupts = <420>;
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c71_1: mbox-c71-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster5 {
- status = "okay";
- interrupts = <416>;
- mbox_c71_2: mbox-c71-2 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c71_3: mbox-c71-3 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
&wkup_uart0 {
/* Firmware usage */
status = "reserved";
@@ -992,135 +776,6 @@ &mcu_cpsw_port1 {
bootph-all;
};
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_timer3 {
- status = "reserved";
-};
-
-&main_timer4 {
- status = "reserved";
-};
-
-&main_timer5 {
- status = "reserved";
-};
-
-&main_timer6 {
- status = "reserved";
-};
-
-&main_timer7 {
- status = "reserved";
-};
-
-&main_timer8 {
- status = "reserved";
-};
-
-&main_timer9 {
- status = "reserved";
-};
-
-&main_r5fss2 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&main_r5fss2_core0 {
- mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
- memory-region = <&main_r5fss2_core0_dma_memory_region>,
- <&main_r5fss2_core0_memory_region>;
-};
-
-&main_r5fss2_core1 {
- mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
- memory-region = <&main_r5fss2_core1_dma_memory_region>,
- <&main_r5fss2_core1_memory_region>;
-};
-
-&c71_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
-};
-
-&c71_1 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
- memory-region = <&c71_1_dma_memory_region>,
- <&c71_1_memory_region>;
-};
-
-&c71_2 {
- status = "okay";
- mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
- memory-region = <&c71_2_dma_memory_region>,
- <&c71_2_memory_region>;
-};
-
-&c71_3 {
- status = "okay";
- mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
- memory-region = <&c71_3_dma_memory_region>,
- <&c71_3_memory_region>;
-};
-
&wkup_gpio_intr {
status = "okay";
};
@@ -1321,12 +976,20 @@ &serdes_wiz0 {
&serdes0 {
status = "okay";
- serdes0_pcie_link: phy@0 {
+ serdes0_pcie1_link: phy@0 {
reg = <0>;
- cdns,num-lanes = <3>;
+ cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
- resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, <&serdes_wiz0 3>;
+ resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+ };
+
+ serdes0_pcie3_link: phy@2 {
+ reg = <2>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 3>;
};
serdes0_usb_link: phy@3 {
@@ -1364,7 +1027,7 @@ &pcie0_rc {
&pcie1_rc {
status = "okay";
reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
- phys = <&serdes0_pcie_link>;
+ phys = <&serdes0_pcie1_link>;
phy-names = "pcie-phy";
num-lanes = <2>;
};
@@ -1372,7 +1035,7 @@ &pcie1_rc {
&pcie3_rc {
status = "okay";
reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
- phys = <&serdes0_pcie_link>;
+ phys = <&serdes0_pcie3_link>;
phy-names = "pcie-phy";
num-lanes = <1>;
};
@@ -1395,3 +1058,6 @@ &usb0 {
phys = <&serdes0_usb_link>;
phy-names = "cdns3,usb3-phy";
};
+
+#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi"
+#include "k3-j784s4-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5ce5f0a..628ff89 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -1516,6 +1516,7 @@ main_r5fss0: r5fss@5c00000 {
ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
<0x5d00000 0x00 0x5d00000 0x20000>;
power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss0_core0: r5f@5c00000 {
compatible = "ti,j7200-r5f";
@@ -1530,6 +1531,7 @@ main_r5fss0_core0: r5f@5c00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss0_core1: r5f@5d00000 {
@@ -1545,6 +1547,7 @@ main_r5fss0_core1: r5f@5d00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 56ab144..692c474 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -612,6 +612,7 @@ mcu_r5fss0: r5fss@41000000 {
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
mcu_r5fss0_core0: r5f@41000000 {
compatible = "ti,j7200-r5f";
@@ -626,6 +627,7 @@ mcu_r5fss0_core0: r5f@41000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
mcu_r5fss0_core1: r5f@41400000 {
@@ -641,6 +643,7 @@ mcu_r5fss0_core1: r5f@41400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 291ab9b..5a8c2e7 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -29,59 +29,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a4000000 {
- reg = <0x00 0xa4000000 0x00 0x00800000>;
- alignment = <0x1000>;
- no-map;
- };
};
mux0: mux-controller-0 {
@@ -224,77 +182,6 @@ partition@800000 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
@@ -537,3 +424,5 @@ &main_mcan0 {
pinctrl-names = "default";
phys = <&transceiver0>;
};
+
+#include "k3-j7200-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..9477f1e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J7200 SoCs
+ *
+ * Copyright (C) 2020-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: memory@a4000000 {
+ reg = <0x00 0xa4000000 0x00 0x00800000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+ interrupts = <432>;
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+ status = "okay";
+};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index fb899c9..352fb60 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -51,119 +51,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- c66_0_dma_memory_region: c66-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- c66_0_memory_region: c66-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- c66_1_dma_memory_region: c66-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- c66_1_memory_region: c66-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a8000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a8100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@aa000000 {
- reg = <0x00 0xaa000000 0x00 0x01c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
gpio_keys: gpio-keys {
@@ -865,129 +763,4 @@ &ufs_wrapper {
status = "disabled";
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
- interrupts = <428>;
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- status = "okay";
- interrupts = <424>;
-
- mbox_c66_0: mbox-c66-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c66_1: mbox-c66-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
- interrupts = <420>;
-
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
- memory-region = <&c66_0_dma_memory_region>,
- <&c66_0_memory_region>;
-};
-
-&c66_1 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
- memory-region = <&c66_1_dma_memory_region>,
- <&c66_1_memory_region>;
-};
-
-&c71_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 5bd0d36..d5fd30a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -608,6 +608,9 @@ ti_csi2rx0: ticsi2rx@4500000 {
cdns_csi2rx0: csi-bridge@4504000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x0 0x4504000 0x0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
<&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -661,6 +664,9 @@ ti_csi2rx1: ticsi2rx@4510000 {
cdns_csi2rx1: csi-bridge@4514000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x0 0x4514000 0x0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 27 2>, <&k3_clks 27 0>, <&k3_clks 27 2>,
<&k3_clks 27 2>, <&k3_clks 27 3>, <&k3_clks 27 3>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1881,6 +1887,45 @@ port@4 {
};
};
+ dphy2: phy@4480000 {
+ compatible = "ti,j721e-dphy";
+ reg = <0x00 0x04480000 0x00 0x1000>;
+ clocks = <&k3_clks 296 1>, <&k3_clks 296 3>;
+ clock-names = "psm", "pll_ref";
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 296 3>;
+ assigned-clock-parents = <&k3_clks 296 4>;
+ assigned-clock-rates = <19200000>;
+ status = "disabled";
+ };
+
+ dsi0: dsi@4800000 {
+ compatible = "ti,j721e-dsi";
+ reg = <0x00 0x04800000 0x00 0x100000>, <0x00 0x04710000 0x00 0x100>;
+ clocks = <&k3_clks 150 1>, <&k3_clks 150 5>;
+ clock-names = "dsi_p_clk", "dsi_sys_clk";
+ power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&dphy2>;
+ phy-names = "dphy";
+ status = "disabled";
+
+ dsi0_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
dss: dss@4a00000 {
compatible = "ti,j721e-dss";
reg =
@@ -2176,6 +2221,7 @@ main_r5fss0: r5fss@5c00000 {
ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
<0x5d00000 0x00 0x5d00000 0x20000>;
power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss0_core0: r5f@5c00000 {
compatible = "ti,j721e-r5f";
@@ -2190,6 +2236,7 @@ main_r5fss0_core0: r5f@5c00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss0_core1: r5f@5d00000 {
@@ -2205,6 +2252,7 @@ main_r5fss0_core1: r5f@5d00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -2216,6 +2264,7 @@ main_r5fss1: r5fss@5e00000 {
ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
<0x5f00000 0x00 0x5f00000 0x20000>;
power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss1_core0: r5f@5e00000 {
compatible = "ti,j721e-r5f";
@@ -2230,6 +2279,7 @@ main_r5fss1_core0: r5f@5e00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss1_core1: r5f@5f00000 {
@@ -2245,6 +2295,7 @@ main_r5fss1_core1: r5f@5f00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index b02142b2..42a2139 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -594,6 +594,7 @@ mcu_r5fss0: r5fss@41000000 {
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
mcu_r5fss0_core0: r5f@41000000 {
compatible = "ti,j721e-r5f";
@@ -608,6 +609,7 @@ mcu_r5fss0_core0: r5f@41000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
mcu_r5fss0_core1: r5f@41400000 {
@@ -623,6 +625,7 @@ mcu_r5fss0_core1: r5f@41400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index ffef3d1..5e5784e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -48,119 +48,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- c66_0_dma_memory_region: c66-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- c66_0_memory_region: c66-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- c66_1_dma_memory_region: c66-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- c66_1_memory_region: c66-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a8000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a8100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@aa000000 {
- reg = <0x00 0xaa000000 0x00 0x01c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
vusb_main: fixedregulator-vusb-main5v0 {
@@ -1279,166 +1177,4 @@ &ufs_wrapper {
status = "disabled";
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
- interrupts = <428>;
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- status = "okay";
- interrupts = <424>;
-
- mbox_c66_0: mbox-c66-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c66_1: mbox-c66-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
- interrupts = <420>;
-
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_timer12 {
- status = "reserved";
-};
-
-&main_timer13 {
- status = "reserved";
-};
-
-&main_timer14 {
- status = "reserved";
-};
-
-&main_timer15 {
- status = "reserved";
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
- memory-region = <&c66_0_dma_memory_region>,
- <&c66_0_memory_region>;
-};
-
-&c66_1 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
- memory-region = <&c66_1_dma_memory_region>,
- <&c66_1_memory_region>;
-};
-
-&c71_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 0722f63..c8073ee 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -29,119 +29,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- c66_1_dma_memory_region: c66-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- c66_0_memory_region: c66-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- c66_0_dma_memory_region: c66-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- c66_1_memory_region: c66-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a8000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a8100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@aa000000 {
- reg = <0x00 0xaa000000 0x00 0x01c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
};
@@ -484,166 +382,4 @@ partition@800000 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
- interrupts = <428>;
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- status = "okay";
- interrupts = <424>;
-
- mbox_c66_0: mbox-c66-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c66_1: mbox-c66-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
- interrupts = <420>;
-
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_timer12 {
- status = "reserved";
-};
-
-&main_timer13 {
- status = "reserved";
-};
-
-&main_timer14 {
- status = "reserved";
-};
-
-&main_timer15 {
- status = "reserved";
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
- memory-region = <&c66_0_dma_memory_region>,
- <&c66_0_memory_region>;
-};
-
-&c66_1 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
- memory-region = <&c66_1_dma_memory_region>,
- <&c66_1_memory_region>;
-};
-
-&c71_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..40c6cc9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J721E SoCs
+ *
+ * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: memory@a4100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: memory@a5100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ /* Carveout locations are flipped due to caching */
+ c66_1_dma_memory_region: memory@a6000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c66_0_memory_region: memory@a6100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ /* Carveout locations are flipped due to caching */
+ c66_0_dma_memory_region: memory@a7000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c66_1_memory_region: memory@a7100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_0_dma_memory_region: memory@a8000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_0_memory_region: memory@a8100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: memory@aa000000 {
+ reg = <0x00 0xaa000000 0x00 0x01c00000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+ interrupts = <432>;
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+ interrupts = <428>;
+
+ mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster3 {
+ status = "okay";
+ interrupts = <424>;
+
+ mbox_c66_0: mbox-c66-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c66_1: mbox-c66-1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster4 {
+ status = "okay";
+ interrupts = <420>;
+
+ mbox_c71_0: mbox-c71-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer12 {
+ status = "reserved";
+};
+
+&main_timer13 {
+ status = "reserved";
+};
+
+&main_timer14 {
+ status = "reserved";
+};
+
+&main_timer15 {
+ status = "reserved";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0 {
+ status = "okay";
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss0_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1 {
+ status = "okay";
+ ti,cluster-mode = <0>;
+};
+
+&main_r5fss1_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+ memory-region = <&c66_0_dma_memory_region>,
+ <&c66_0_memory_region>;
+};
+
+&c66_1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+ memory-region = <&c66_1_dma_memory_region>,
+ <&c66_1_memory_region>;
+};
+
+&c71_0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+ memory-region = <&c71_0_dma_memory_region>,
+ <&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index e2fc128..9e43dcf 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -93,6 +93,28 @@ vdd_sd_dv: gpio-regulator-TLV71033 {
<3300000 0x1>;
};
+ dp1_pwr_3v3: regulator-dp1-prw {
+ compatible = "regulator-fixed";
+ regulator-name = "dp1-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&exp4 1 GPIO_ACTIVE_HIGH>; /* P1 - DP1_PWR_SW_EN */
+ enable-active-high;
+ };
+
+ dp1: connector-dp1 {
+ compatible = "dp-connector";
+ label = "DP1";
+ type = "full-size";
+ dp-pwr-supply = <&dp1_pwr_3v3>;
+
+ port {
+ dp1_connector_in: endpoint {
+ remote-endpoint = <&dp1_out>;
+ };
+ };
+ };
+
transceiver1: can-phy1 {
compatible = "ti,tcan1043";
#phy-cells = <0>;
@@ -148,6 +170,13 @@ J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* (AC27) MCASP2_AXR1.I2C3_SDA */
>;
};
+ main_i2c4_pins_default: main-i2c4-default-pins {
+ pinctrl-single,pins = <
+ J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) I2C4_SCL */
+ J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) I2C4_SDA */
+ >;
+ };
+
main_i2c5_pins_default: main-i2c5-default-pins {
pinctrl-single,pins = <
J721S2_IOPAD(0x01c, PIN_INPUT, 8) /* (Y24) MCAN15_TX.I2C5_SCL */
@@ -370,6 +399,23 @@ exp2: gpio@22 {
};
};
+&main_i2c4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c4_pins_default>;
+ clock-frequency = <400000>;
+
+ exp4: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "DP0_PWR_SW_EN", "DP1_PWR_SW_EN", "UB981_PDB",
+ "UB981_GPIO0", "UB981_GPIO1", "UB981_GPIO2",
+ "UB981_GPIO3", "PWR_SW_CNTL_DSI0#";
+ };
+};
+
&main_i2c5 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c5_pins_default>;
@@ -539,3 +585,74 @@ &main_mcan5 {
pinctrl-0 = <&main_mcan5_pins_default>;
phys = <&transceiver4>;
};
+
+&dss {
+ /*
+ * DSS on J721S2-EVM supports DP on VP0 and DSI on VP2.
+ * These clock assignments are chosen to enable the following outputs:
+ * VP0 - DisplayPort SST
+ * VP2 - DSI
+ */
+ status = "okay";
+ assigned-clocks = <&k3_clks 158 2>,
+ <&k3_clks 158 14>;
+ assigned-clock-parents = <&k3_clks 158 3>,
+ <&k3_clks 158 16>;
+};
+
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+
+ dpi2_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+};
+
+&dsi0_ports {
+ port@0 {
+ reg = <0>;
+
+ dsi0_out: endpoint {
+ remote-endpoint = <&dp1_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpi2_out>;
+ };
+ };
+};
+
+&dsi_edp_bridge_ports {
+ port@0 {
+ reg = <0>;
+
+ dp1_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dp1_out: endpoint {
+ remote-endpoint = <&dp1_connector_in>;
+ };
+ };
+};
+
+&dphy_tx0 {
+ status = "okay";
+};
+
+&dsi0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso
new file mode 100644
index 0000000..fe4a23e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling USB0 instance of USB in the Host Mode of operation
+ * with the Type-A Connector on the J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&exp_som {
+ p0-hog {
+ /* P0 - USB2.0_MUX_SEL */
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "USB2.0_MUX_SEL";
+ };
+};
+
+&usb0 {
+ dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 62f4537..80c51b1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1248,6 +1248,9 @@ ti_csi2rx0: ticsi2rx@4500000 {
cdns_csi2rx0: csi-bridge@4504000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x04504000 0x00 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 38 3>, <&k3_clks 38 1>, <&k3_clks 38 3>,
<&k3_clks 38 3>, <&k3_clks 38 4>, <&k3_clks 38 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1301,6 +1304,9 @@ ti_csi2rx1: ticsi2rx@4510000 {
cdns_csi2rx1: csi-bridge@4514000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x04514000 0x00 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 39 3>, <&k3_clks 39 1>, <&k3_clks 39 3>,
<&k3_clks 39 3>, <&k3_clks 39 4>, <&k3_clks 39 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1431,6 +1437,7 @@ pcie1_rc: pcie@2910000 {
pcie1_intc: interrupt-controller {
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
interrupt-parent = <&gic500>;
interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
@@ -1795,6 +1802,45 @@ main_spi7: spi@2170000 {
status = "disabled";
};
+ dphy_tx0: phy@4480000 {
+ compatible = "ti,j721e-dphy";
+ reg = <0x00 0x04480000 0x00 0x00001000>;
+ clocks = <&k3_clks 363 8>, <&k3_clks 363 14>;
+ clock-names = "psm", "pll_ref";
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 363 14>;
+ assigned-clock-parents = <&k3_clks 363 15>;
+ assigned-clock-rates = <19200000>;
+ status = "disabled";
+ };
+
+ dsi0: dsi@4800000 {
+ compatible = "ti,j721e-dsi";
+ reg = <0x00 0x04800000 0x00 0x00100000>,
+ <0x00 0x04710000 0x00 0x00000100>;
+ clocks = <&k3_clks 154 4>, <&k3_clks 154 1>;
+ clock-names = "dsi_p_clk", "dsi_sys_clk";
+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&dphy_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+
+ dsi0_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
dss: dss@4a00000 {
compatible = "ti,j721e-dss";
reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
@@ -1849,6 +1895,7 @@ main_r5fss0: r5fss@5c00000 {
ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
<0x5d00000 0x00 0x5d00000 0x20000>;
power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss0_core0: r5f@5c00000 {
compatible = "ti,j721s2-r5f";
@@ -1863,6 +1910,7 @@ main_r5fss0_core0: r5f@5c00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss0_core1: r5f@5d00000 {
@@ -1878,6 +1926,7 @@ main_r5fss0_core1: r5f@5d00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -1889,6 +1938,7 @@ main_r5fss1: r5fss@5e00000 {
ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
<0x5f00000 0x00 0x5f00000 0x20000>;
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss1_core0: r5f@5e00000 {
compatible = "ti,j721s2-r5f";
@@ -1903,6 +1953,7 @@ main_r5fss1_core0: r5f@5e00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss1_core1: r5f@5f00000 {
@@ -1918,6 +1969,7 @@ main_r5fss1_core1: r5f@5f00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index bc31266..8370977 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -690,6 +690,7 @@ mcu_r5fss0: r5fss@41000000 {
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
mcu_r5fss0_core0: r5f@41000000 {
compatible = "ti,j721s2-r5f";
@@ -704,6 +705,7 @@ mcu_r5fss0_core0: r5f@41000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
mcu_r5fss0_core1: r5f@41400000 {
@@ -719,6 +721,7 @@ mcu_r5fss0_core1: r5f@41400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index 54fc5c4f..12a38dd 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -31,107 +31,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_1_dma_memory_region: c71-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- c71_1_memory_region: c71-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a8000000 {
- reg = <0x00 0xa8000000 0x00 0x01c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
mux0: mux-controller-0 {
@@ -152,6 +62,30 @@ transceiver0: can-phy0 {
#phy-cells = <0>;
max-bitrate = <5000000>;
};
+
+ vsys_io_1v8: regulator-vsys-io-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_io_1v2: regulator-vsys-io-1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_io_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ edp1_refclk: clock-edp1-refclk {
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ #clock-cells = <0>;
+ };
};
&wkup_pmx0 {
@@ -492,141 +426,31 @@ partition@3fc0000 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
+&main_i2c4 {
+ bridge_dsi_edp: bridge-dsi-edp@2c {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+ clock-names = "refclk";
+ clocks = <&edp1_refclk>;
+ enable-gpios = <&exp_som 5 0>;
+ vpll-supply = <&vsys_io_1v8>;
+ vccio-supply = <&vsys_io_1v8>;
+ vcca-supply = <&vsys_io_1v2>;
+ vcc-supply = <&vsys_io_1v2>;
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
+ dsi_edp_bridge_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
};
};
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
- interrupts = <428>;
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
- interrupts = <420>;
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c71_1: mbox-c71-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_timer3 {
- status = "reserved";
-};
-
-&main_timer4 {
- status = "reserved";
-};
-
-&main_timer5 {
- status = "reserved";
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&c71_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
-};
-
-&c71_1 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
- memory-region = <&c71_1_dma_memory_region>,
- <&c71_1_memory_region>;
-};
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..ebab0cc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J721S2 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: memory@a4100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: memory@a5100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_0_dma_memory_region: memory@a6000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_0_memory_region: memory@a6100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_1_dma_memory_region: memory@a7000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_1_memory_region: memory@a7100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: memory@a8000000 {
+ reg = <0x00 0xa8000000 0x00 0x01c00000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+ interrupts = <432>;
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+ interrupts = <428>;
+
+ mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster4 {
+ status = "okay";
+ interrupts = <420>;
+
+ mbox_c71_0: mbox-c71-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c71_1: mbox-c71-1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer3 {
+ status = "reserved";
+};
+
+&main_timer4 {
+ status = "reserved";
+};
+
+&main_timer5 {
+ status = "reserved";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+ status = "okay";
+};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+ status = "okay";
+};
+
+&main_r5fss1_core0 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss1_core1 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+ status = "okay";
+};
+
+&c71_0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+ memory-region = <&c71_0_dma_memory_region>,
+ <&c71_0_memory_region>;
+};
+
+&c71_1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+ memory-region = <&c71_1_dma_memory_region>,
+ <&c71_1_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 9d8abfa..e0e303d 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -52,71 +52,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ wkup_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ wkup_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- c7x_1_memory_region: c7x-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- rtos_ipc_memory_region: ipc-memories@a5000000 {
- reg = <0x00 0xa5000000 0x00 0x1c00000>;
- alignment = <0x1000>;
- no-map;
- };
};
vmain_pd: regulator-0 {
@@ -788,104 +734,6 @@ &sdhci1 {
bootph-all;
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_wkup_r5_0: mbox-wkup-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- status = "okay";
-
- mbox_main_r5_0: mbox-main-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c7x_1: mbox-c7x-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
- status = "okay";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0 {
- status = "okay";
-};
-
-&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&c7x_0 {
- mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
- status = "okay";
-};
-
-&c7x_1 {
- mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
- memory-region = <&c7x_1_dma_memory_region>,
- <&c7x_1_memory_region>;
- status = "okay";
-};
-
&serdes_ln_ctrl {
idle-states = <J722S_SERDES0_LANE0_USB>,
<J722S_SERDES1_LANE0_PCIE0_LANE0>;
@@ -936,6 +784,10 @@ &usb0 {
usb-role-switch;
};
+&usb0_phy_ctrl {
+ bootph-all;
+};
+
&usbss1 {
pinctrl-names = "default";
pinctrl-0 = <&main_usb1_pins_default>;
@@ -996,3 +848,5 @@ &mcu_i2c0 {
clock-frequency = <400000>;
status = "okay";
};
+
+#include "k3-j722s-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 5cfa7bf..d57fdd3 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -168,6 +168,9 @@ ti_csi2rx1: ticsi2rx@30122000 {
cdns_csi2rx1: csi-bridge@30121000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x30121000 0x00 0x1000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 247 0>, <&k3_clks 247 3>, <&k3_clks 247 0>,
<&k3_clks 247 0>, <&k3_clks 247 4>, <&k3_clks 247 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -221,6 +224,9 @@ ti_csi2rx2: ticsi2rx@30142000 {
cdns_csi2rx2: csi-bridge@30141000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x30141000 0x00 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 248 0>, <&k3_clks 248 3>, <&k3_clks 248 0>,
<&k3_clks 248 0>, <&k3_clks 248 4>, <&k3_clks 248 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -274,6 +280,9 @@ ti_csi2rx3: ticsi2rx@30162000 {
cdns_csi2rx3: csi-bridge@30161000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x30161000 0x00 0x1000>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 249 0>, <&k3_clks 249 3>, <&k3_clks 249 0>,
<&k3_clks 249 0>, <&k3_clks 249 4>, <&k3_clks 249 4>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -359,6 +368,7 @@ main_r5fss0_core0: r5f@78400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -385,6 +395,16 @@ c7x_1: dsp@7e200000 {
ti,sci-proc-ids = <0x31 0xff>;
status = "disabled";
};
+
+ e5010: jpeg-encoder@fd20000 {
+ compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
+ reg = <0x00 0xfd20000 0x00 0x100>,
+ <0x00 0xfd20200 0x00 0x200>;
+ reg-names = "core", "mmu";
+ clocks = <&k3_clks 201 0>;
+ power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
&main_bcdma_csi {
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..cb7cd38
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J722S SoCs
+ *
+ * Copyright (C) 2024-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_r5fss0_core0_dma_memory_region: memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c7x_0_dma_memory_region: memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c7x_1_dma_memory_region: memory@a4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_1_memory_region: memory@a4100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: memory@a5000000 {
+ reg = <0x00 0xa5000000 0x00 0x1c00000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_wkup_r5_0: mbox-wkup-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster3 {
+ status = "okay";
+
+ mbox_main_r5_0: mbox-main-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c7x_1: mbox-c7x-1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&main_r5fss0 {
+ status = "okay";
+};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ status = "okay";
+};
+
+&c7x_1 {
+ mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
+ memory-region = <&c7x_1_dma_memory_region>,
+ <&c7x_1_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi
new file mode 100644
index 0000000..61db234
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for J742S2 SoC Family
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruje3
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+&mcu_r5fss0_core0 {
+ firmware-name = "j742s2-mcu-r5f0_0-fw";
+};
+
+&mcu_r5fss0_core1 {
+ firmware-name = "j742s2-mcu-r5f0_1-fw";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2.dtsi b/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
index 7a72f82..d265df1 100644
--- a/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
@@ -96,3 +96,4 @@ cpu3: cpu@3 {
};
#include "k3-j742s2-main.dtsi"
+#include "k3-j742s2-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index a84bde0..6c7458c 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -27,31 +27,7 @@ memory@80000000 {
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
-
- c71_3_dma_memory_region: c71-dma-memory@ab000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xab000000 0x00 0x100000>;
- no-map;
- };
-
- c71_3_memory_region: c71-memory@ab100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xab100000 0x00 0xf00000>;
- no-map;
- };
};
};
-&mailbox0_cluster5 {
- mbox_c71_3: mbox-c71-3 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&c71_3 {
- mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
- memory-region = <&c71_3_dma_memory_region>,
- <&c71_3_memory_region>;
- status = "okay";
-};
+#include "k3-j784s4-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
index fa656b7..419c1a7 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
@@ -35,137 +35,17 @@ secure_ddr: optee@9e800000 {
no-map;
};
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
- mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ mcu_r5fss0_core0_memory_region: memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
-
- mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1000000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa1100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa2100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa3100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa4100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa5100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa6100000 0x00 0xf00000>;
- no-map;
- };
-
- main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7000000 0x00 0x100000>;
- no-map;
- };
-
- main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa7100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_0_dma_memory_region: c71-dma-memory@a8000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8000000 0x00 0x100000>;
- no-map;
- };
-
- c71_0_memory_region: c71-memory@a8100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa8100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_1_dma_memory_region: c71-dma-memory@a9000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa9000000 0x00 0x100000>;
- no-map;
- };
-
- c71_1_memory_region: c71-memory@a9100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xa9100000 0x00 0xf00000>;
- no-map;
- };
-
- c71_2_dma_memory_region: c71-dma-memory@aa000000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xaa000000 0x00 0x100000>;
- no-map;
- };
-
- c71_2_memory_region: c71-memory@aa100000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0xaa100000 0x00 0xf00000>;
- no-map;
- };
};
evm_12v0: regulator-evm12v0 {
@@ -301,6 +181,52 @@ codec_audio: sound {
clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
"cpb-codec-scki", "cpb-codec-scki-48000";
};
+
+ vsys_io_1v8: regulator-vsys-io-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_io_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_io_1v2: regulator-vsys-io-1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_io_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ edp1_refclk: clock-edp1-refclk {
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ #clock-cells = <0>;
+ };
+
+ dp1_pwr_3v3: regulator-dp1-prw {
+ compatible = "regulator-fixed";
+ regulator-name = "dp1-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&exp4 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ dp1: connector-dp1 {
+ compatible = "dp-connector";
+ label = "DP1";
+ type = "full-size";
+ dp-pwr-supply = <&dp1_pwr_3v3>;
+
+ port {
+ dp1_connector_in: endpoint {
+ remote-endpoint = <&dp1_out>;
+ };
+ };
+ };
};
&wkup_gpio0 {
@@ -1023,221 +949,6 @@ &main_cpsw1_port1 {
status = "okay";
};
-&mailbox0_cluster0 {
- status = "okay";
- interrupts = <436>;
-
- mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
- interrupts = <432>;
-
- mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
- interrupts = <428>;
-
- mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster3 {
- status = "okay";
- interrupts = <424>;
-
- mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster4 {
- status = "okay";
- interrupts = <420>;
-
- mbox_c71_0: mbox-c71-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_c71_1: mbox-c71-1 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mailbox0_cluster5 {
- status = "okay";
- interrupts = <416>;
-
- mbox_c71_2: mbox-c71-2 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mcu_r5fss0_core0 {
- status = "okay";
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
- status = "okay";
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
- memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
- <&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
- ti,cluster-mode = <0>;
-};
-
-&main_r5fss2 {
- ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
- status = "reserved";
-};
-
-&main_timer1 {
- status = "reserved";
-};
-
-&main_timer2 {
- status = "reserved";
-};
-
-&main_timer3 {
- status = "reserved";
-};
-
-&main_timer4 {
- status = "reserved";
-};
-
-&main_timer5 {
- status = "reserved";
-};
-
-&main_timer6 {
- status = "reserved";
-};
-
-&main_timer7 {
- status = "reserved";
-};
-
-&main_timer8 {
- status = "reserved";
-};
-
-&main_timer9 {
- status = "reserved";
-};
-
-&main_r5fss0_core0 {
- status = "okay";
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
- memory-region = <&main_r5fss0_core0_dma_memory_region>,
- <&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
- status = "okay";
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
- memory-region = <&main_r5fss0_core1_dma_memory_region>,
- <&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
- status = "okay";
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
- memory-region = <&main_r5fss1_core0_dma_memory_region>,
- <&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
- status = "okay";
- mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
- memory-region = <&main_r5fss1_core1_dma_memory_region>,
- <&main_r5fss1_core1_memory_region>;
-};
-
-&main_r5fss2_core0 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
- memory-region = <&main_r5fss2_core0_dma_memory_region>,
- <&main_r5fss2_core0_memory_region>;
-};
-
-&main_r5fss2_core1 {
- status = "okay";
- mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
- memory-region = <&main_r5fss2_core1_dma_memory_region>,
- <&main_r5fss2_core1_memory_region>;
-};
-
-&c71_0 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
- memory-region = <&c71_0_dma_memory_region>,
- <&c71_0_memory_region>;
-};
-
-&c71_1 {
- status = "okay";
- mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
- memory-region = <&c71_1_dma_memory_region>,
- <&c71_1_memory_region>;
-};
-
-&c71_2 {
- status = "okay";
- mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
- memory-region = <&c71_2_dma_memory_region>,
- <&c71_2_memory_region>;
-};
-
&tscadc0 {
pinctrl-0 = <&mcu_adc0_pins_default>;
pinctrl-names = "default";
@@ -1340,12 +1051,26 @@ &mhdp {
};
&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
/* DP */
- port {
+ port@0 {
+ reg = <0>;
+
dpi0_out: endpoint {
remote-endpoint = <&dp0_in>;
};
};
+
+ /* DSI */
+ port@2 {
+ reg = <2>;
+
+ dpi2_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
};
&main_i2c4 {
@@ -1360,6 +1085,65 @@ exp4: gpio@20 {
gpio-controller;
#gpio-cells = <2>;
};
+
+ bridge_dsi_edp: bridge-dsi-edp@2c {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+ clock-names = "refclk";
+ clocks = <&edp1_refclk>;
+ enable-gpios = <&exp4 2 GPIO_ACTIVE_HIGH>;
+ vpll-supply = <&vsys_io_1v8>;
+ vccio-supply = <&vsys_io_1v8>;
+ vcca-supply = <&vsys_io_1v2>;
+ vcc-supply = <&vsys_io_1v2>;
+
+ dsi_edp_bridge_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dp1_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dp1_out: endpoint {
+ remote-endpoint = <&dp1_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&dsi0_ports {
+ port@0 {
+ reg = <0>;
+
+ dsi0_out: endpoint {
+ remote-endpoint = <&dp1_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpi2_out>;
+ };
+ };
+};
+
+&dphy_tx0 {
+ status = "okay";
+};
+
+&dsi0 {
+ status = "okay";
};
&dp0_ports {
@@ -1493,3 +1277,5 @@ &mcasp0 {
0 0 0 0
>;
};
+
+#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
index 7c5b0c6..9cc0901 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -819,6 +819,9 @@ ti_csi2rx0: ticsi2rx@4500000 {
cdns_csi2rx0: csi-bridge@4504000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x04504000 0x00 0x00001000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 72 2>, <&k3_clks 72 0>, <&k3_clks 72 2>,
<&k3_clks 72 2>, <&k3_clks 72 3>, <&k3_clks 72 3>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -872,6 +875,9 @@ ti_csi2rx1: ticsi2rx@4510000 {
cdns_csi2rx1: csi-bridge@4514000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x04514000 0x00 0x00001000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 73 2>, <&k3_clks 73 0>, <&k3_clks 73 2>,
<&k3_clks 73 2>, <&k3_clks 73 3>, <&k3_clks 73 3>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -924,6 +930,9 @@ ti_csi2rx2: ticsi2rx@4520000 {
cdns_csi2rx2: csi-bridge@4524000 {
compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
reg = <0x00 0x04524000 0x00 0x00001000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error_irq", "irq";
clocks = <&k3_clks 74 2>, <&k3_clks 74 0>, <&k3_clks 74 2>,
<&k3_clks 74 2>, <&k3_clks 74 3>, <&k3_clks 74 3>;
clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -2165,6 +2174,7 @@ main_r5fss0: r5fss@5c00000 {
ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
<0x5d00000 0x00 0x5d00000 0x20000>;
power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss0_core0: r5f@5c00000 {
compatible = "ti,j721s2-r5f";
@@ -2179,6 +2189,7 @@ main_r5fss0_core0: r5f@5c00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss0_core1: r5f@5d00000 {
@@ -2194,6 +2205,7 @@ main_r5fss0_core1: r5f@5d00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -2205,6 +2217,7 @@ main_r5fss1: r5fss@5e00000 {
ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
<0x5f00000 0x00 0x5f00000 0x20000>;
power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss1_core0: r5f@5e00000 {
compatible = "ti,j721s2-r5f";
@@ -2219,6 +2232,7 @@ main_r5fss1_core0: r5f@5e00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss1_core1: r5f@5f00000 {
@@ -2234,6 +2248,7 @@ main_r5fss1_core1: r5f@5f00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -2245,6 +2260,7 @@ main_r5fss2: r5fss@5900000 {
ranges = <0x5900000 0x00 0x5900000 0x20000>,
<0x5a00000 0x00 0x5a00000 0x20000>;
power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss2_core0: r5f@5900000 {
compatible = "ti,j721s2-r5f";
@@ -2259,6 +2275,7 @@ main_r5fss2_core0: r5f@5900000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss2_core1: r5f@5a00000 {
@@ -2274,6 +2291,7 @@ main_r5fss2_core1: r5f@5a00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -2522,6 +2540,45 @@ watchdog18: watchdog@2550000 {
status = "reserved";
};
+ dphy_tx0: phy@4480000 {
+ compatible = "ti,j721e-dphy";
+ reg = <0x00 0x04480000 0x00 0x00001000>;
+ clocks = <&k3_clks 402 20>, <&k3_clks 402 3>;
+ clock-names = "psm", "pll_ref";
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 402 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 402 3>;
+ assigned-clock-parents = <&k3_clks 402 4>;
+ assigned-clock-rates = <19200000>;
+ status = "disabled";
+ };
+
+ dsi0: dsi@4800000 {
+ compatible = "ti,j721e-dsi";
+ reg = <0x00 0x04800000 0x00 0x00100000>,
+ <0x00 0x04710000 0x00 0x00000100>;
+ clocks = <&k3_clks 215 2>, <&k3_clks 215 5>;
+ clock-names = "dsi_p_clk", "dsi_sys_clk";
+ power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&dphy_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+
+ dsi0_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
mhdp: bridge@a000000 {
compatible = "ti,j721e-mhdp8546";
reg = <0x0 0xa000000 0x0 0x30a00>,
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
index 52e2965..cc22bfb 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
@@ -595,6 +595,7 @@ mcu_r5fss0: r5fss@41000000 {
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
mcu_r5fss0_core0: r5f@41000000 {
compatible = "ti,j721s2-r5f";
@@ -609,6 +610,7 @@ mcu_r5fss0_core0: r5f@41000000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
mcu_r5fss0_core1: r5f@41400000 {
@@ -624,6 +626,7 @@ mcu_r5fss0_core1: r5f@41400000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
new file mode 100644
index 0000000..4553972
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J784S4/J742S2 SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: memory@a4100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa4100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: memory@a5100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa5100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss2_core0_dma_memory_region: memory@a6000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss2_core0_memory_region: memory@a6100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa6100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss2_core1_dma_memory_region: memory@a7000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss2_core1_memory_region: memory@a7100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa7100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_0_dma_memory_region: memory@a8000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_0_memory_region: memory@a8100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa8100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_1_dma_memory_region: memory@a9000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa9000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_1_memory_region: memory@a9100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa9100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ c71_2_dma_memory_region: memory@aa000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xaa000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_2_memory_region: memory@aa100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xaa100000 0x00 0xf00000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+ interrupts = <436>;
+
+ mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+ interrupts = <432>;
+
+ mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+ interrupts = <428>;
+
+ mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster3 {
+ status = "okay";
+ interrupts = <424>;
+
+ mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster4 {
+ status = "okay";
+ interrupts = <420>;
+
+ mbox_c71_0: mbox-c71-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_c71_1: mbox-c71-1 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mailbox0_cluster5 {
+ status = "okay";
+ interrupts = <416>;
+
+ mbox_c71_2: mbox-c71-2 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer3 {
+ status = "reserved";
+};
+
+&main_timer4 {
+ status = "reserved";
+};
+
+&main_timer5 {
+ status = "reserved";
+};
+
+&main_timer6 {
+ status = "reserved";
+};
+
+&main_timer7 {
+ status = "reserved";
+};
+
+&main_timer8 {
+ status = "reserved";
+};
+
+&main_timer9 {
+ status = "reserved";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+ <&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0 {
+ ti,cluster-mode = <0>;
+ status = "okay";
+};
+
+&main_r5fss0_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1 {
+ ti,cluster-mode = <0>;
+ status = "okay";
+};
+
+&main_r5fss1_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2 {
+ ti,cluster-mode = <0>;
+ status = "okay";
+};
+
+&main_r5fss2_core0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
+ memory-region = <&main_r5fss2_core0_dma_memory_region>,
+ <&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
+ memory-region = <&main_r5fss2_core1_dma_memory_region>,
+ <&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+ memory-region = <&c71_0_dma_memory_region>,
+ <&c71_0_memory_region>;
+};
+
+&c71_1 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+ memory-region = <&c71_1_dma_memory_region>,
+ <&c71_1_memory_region>;
+};
+
+&c71_2 {
+ status = "okay";
+ mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
+ memory-region = <&c71_2_dma_memory_region>,
+ <&c71_2_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi
new file mode 100644
index 0000000..81b508b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J784S4 SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ c71_3_dma_memory_region: memory@ab000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xab000000 0x00 0x100000>;
+ no-map;
+ };
+
+ c71_3_memory_region: memory@ab100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xab100000 0x00 0xf00000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster5 {
+
+ mbox_c71_3: mbox-c71-3 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&c71_3 {
+ mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
+ memory-region = <&c71_3_dma_memory_region>,
+ <&c71_3_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index c0f09be..e46f7bf 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -3,15 +3,20 @@
* This header provides constants for pinctrl bindings for TI's K3 SoC
* family.
*
- * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef DTS_ARM64_TI_K3_PINCTRL_H
#define DTS_ARM64_TI_K3_PINCTRL_H
+#define WKUP_LVL_EN_SHIFT (7)
+#define WKUP_LVL_POL_SHIFT (8)
#define ST_EN_SHIFT (14)
#define PULLUDEN_SHIFT (16)
#define PULLTYPESEL_SHIFT (17)
#define RXACTIVE_SHIFT (18)
+#define DRV_STR_SHIFT (19)
+#define ISO_OVERRIDE_EN_SHIFT (22)
+#define ISO_BYPASS_EN_SHIFT (23)
#define DEBOUNCE_SHIFT (11)
#define FORCE_DS_EN_SHIFT (15)
#define DS_EN_SHIFT (24)
@@ -19,6 +24,7 @@
#define DS_OUT_VAL_SHIFT (26)
#define DS_PULLUD_EN_SHIFT (27)
#define DS_PULLTYPE_SEL_SHIFT (28)
+#define WKUP_EN_SHIFT (29)
/* Schmitt trigger configuration */
#define ST_DISABLE (0 << ST_EN_SHIFT)
@@ -33,6 +39,29 @@
#define INPUT_EN (1 << RXACTIVE_SHIFT)
#define INPUT_DISABLE (0 << RXACTIVE_SHIFT)
+#define DS_PULL_DISABLE (1 << DS_PULLUD_EN_SHIFT)
+#define DS_PULL_ENABLE (0 << DS_PULLUD_EN_SHIFT)
+
+#define DS_PULL_UP (1 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+#define DS_PULL_DOWN (0 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+
+#define DS_STATE_EN (1 << DS_EN_SHIFT)
+#define DS_STATE_DISABLE (0 << DS_EN_SHIFT)
+
+#define DS_INPUT_EN (1 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+#define DS_INPUT_DISABLE (0 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+
+#define DS_OUT_VALUE_ZERO (0 << DS_OUT_VAL_SHIFT)
+#define DS_OUT_VALUE_ONE (1 << DS_OUT_VAL_SHIFT)
+
+/* Configuration to enable wake-up on pin activity */
+#define WKUP_ENABLE (1 << WKUP_EN_SHIFT)
+#define WKUP_DISABLE (0 << WKUP_EN_SHIFT)
+#define WKUP_ON_LEVEL (1 << WKUP_LVL_EN_SHIFT)
+#define WKUP_ON_EDGE (0 << WKUP_LVL_EN_SHIFT)
+#define WKUP_LEVEL_LOW (0 << WKUP_LVL_POL_SHIFT)
+#define WKUP_LEVEL_HIGH (1 << WKUP_LVL_POL_SHIFT)
+
/* Only these macros are expected be used directly in device tree files */
#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP)
@@ -53,10 +82,14 @@
#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
+#define PIN_DRIVE_STRENGTH_NOMINAL (0 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_SLOW (1 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_FAST (2 << DRV_STR_SHIFT)
+
#define PIN_DS_FORCE_DISABLE (0 << FORCE_DS_EN_SHIFT)
#define PIN_DS_FORCE_ENABLE (1 << FORCE_DS_EN_SHIFT)
-#define PIN_DS_IO_OVERRIDE_DISABLE (0 << DS_IO_OVERRIDE_EN_SHIFT)
-#define PIN_DS_IO_OVERRIDE_ENABLE (1 << DS_IO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_DISABLE (0 << ISO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_ENABLE (1 << ISO_OVERRIDE_EN_SHIFT)
#define PIN_DS_OUT_ENABLE (0 << DS_OUT_DIS_SHIFT)
#define PIN_DS_OUT_DISABLE (1 << DS_OUT_DIS_SHIFT)
#define PIN_DS_OUT_VALUE_ZERO (0 << DS_OUT_VAL_SHIFT)
@@ -65,6 +98,18 @@
#define PIN_DS_PULLUD_DISABLE (1 << DS_PULLUD_EN_SHIFT)
#define PIN_DS_PULL_DOWN (0 << DS_PULLTYPE_SEL_SHIFT)
#define PIN_DS_PULL_UP (1 << DS_PULLTYPE_SEL_SHIFT)
+#define PIN_DS_ISO_BYPASS (1 << ISO_BYPASS_EN_SHIFT)
+#define PIN_DS_ISO_BYPASS_DISABLE (0 << ISO_BYPASS_EN_SHIFT)
+
+#define PIN_DS_OUTPUT_LOW (DS_INPUT_DISABLE | DS_OUT_VALUE_ZERO)
+#define PIN_DS_OUTPUT_HIGH (DS_INPUT_DISABLE | DS_OUT_VALUE_ONE)
+#define PIN_DS_INPUT (DS_INPUT_EN | DS_PULL_DISABLE)
+#define PIN_DS_INPUT_PULLUP (DS_INPUT_EN | DS_PULL_UP)
+#define PIN_DS_INPUT_PULLDOWN (DS_INPUT_EN | DS_PULL_DOWN)
+
+#define PIN_WKUP_EN_LEVEL_LOW (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_LOW)
+#define PIN_WKUP_EN_LEVEL_HIGH (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_HIGH)
+#define PIN_WKUP_EN (WKUP_ENABLE | WKUP_ON_EDGE)
/* Default mux configuration for gpio-ranges to use with pinctrl */
#define PIN_GPIO_RANGE_IOPAD (PIN_INPUT | 7)
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
index 39806f0..9aa7b18 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -152,6 +152,7 @@ soc {
gic: interrupt-controller@24001000 {
compatible = "arm,gic-400";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
reg = <0 0x24001000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index 7f5a880..70fac0b 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -30,4 +30,28 @@
zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
+zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revA.dtb
+zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revB.dtb
+zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revA.dtb
+zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revB.dtb
+
+zynqmp-sm-k24-revA-sck-kd-g-revA-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kd-g-revA.dtb
+zynqmp-smk-k24-revA-sck-kd-g-revA-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kd-g-revA.dtb
+
+zynqmp-sm-k24-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kv-g-revB.dtb
+zynqmp-smk-k24-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kv-g-revB.dtb
+
+zynqmp-sm-k24-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kr-g-revB.dtb
+zynqmp-smk-k24-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kr-g-revB.dtb
+
dtb-$(CONFIG_ARCH_ZYNQMP) += versal-net-vn-x-b2197-01-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/versal-net.dtsi b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
index fc9f49e..412af9a 100644
--- a/arch/arm64/boot/dts/xilinx/versal-net.dtsi
+++ b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
@@ -104,6 +104,28 @@ cpu0: cpu@0 {
reg = <0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_00>;
+ l2_00: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
};
cpu100: cpu@100 {
compatible = "arm,cortex-a78";
@@ -112,6 +134,28 @@ cpu100: cpu@100 {
reg = <0x100>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_01>;
+ l2_01: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
};
cpu200: cpu@200 {
compatible = "arm,cortex-a78";
@@ -120,6 +164,28 @@ cpu200: cpu@200 {
reg = <0x200>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_02>;
+ l2_02: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
};
cpu300: cpu@300 {
compatible = "arm,cortex-a78";
@@ -128,6 +194,28 @@ cpu300: cpu@300 {
reg = <0x300>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_03>;
+ l2_03: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_0>;
+ };
};
cpu10000: cpu@10000 {
compatible = "arm,cortex-a78";
@@ -136,6 +224,28 @@ cpu10000: cpu@10000 {
reg = <0x10000>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_10>;
+ l2_10: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_1>;
+ };
};
cpu10100: cpu@10100 {
compatible = "arm,cortex-a78";
@@ -144,6 +254,28 @@ cpu10100: cpu@10100 {
reg = <0x10100>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_11>;
+ l2_11: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_1>;
+ };
};
cpu10200: cpu@10200 {
compatible = "arm,cortex-a78";
@@ -152,6 +284,28 @@ cpu10200: cpu@10200 {
reg = <0x10200>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_12>;
+ l2_12: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_1>;
+ };
};
cpu10300: cpu@10300 {
compatible = "arm,cortex-a78";
@@ -160,6 +314,28 @@ cpu10300: cpu@10300 {
reg = <0x10300>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_13>;
+ l2_13: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_1>;
+ };
};
cpu20000: cpu@20000 {
compatible = "arm,cortex-a78";
@@ -168,6 +344,28 @@ cpu20000: cpu@20000 {
reg = <0x20000>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_20>;
+ l2_20: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_2>;
+ };
};
cpu20100: cpu@20100 {
compatible = "arm,cortex-a78";
@@ -176,6 +374,28 @@ cpu20100: cpu@20100 {
reg = <0x20100>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_21>;
+ l2_21: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_2>;
+ };
};
cpu20200: cpu@20200 {
compatible = "arm,cortex-a78";
@@ -184,6 +404,28 @@ cpu20200: cpu@20200 {
reg = <0x20200>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_22>;
+ l2_22: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_2>;
+ };
};
cpu20300: cpu@20300 {
compatible = "arm,cortex-a78";
@@ -192,6 +434,28 @@ cpu20300: cpu@20300 {
reg = <0x20300>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_23>;
+ l2_23: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_2>;
+ };
};
cpu30000: cpu@30000 {
compatible = "arm,cortex-a78";
@@ -200,6 +464,28 @@ cpu30000: cpu@30000 {
reg = <0x30000>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_30>;
+ l2_30: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_3>;
+ };
};
cpu30100: cpu@30100 {
compatible = "arm,cortex-a78";
@@ -208,6 +494,28 @@ cpu30100: cpu@30100 {
reg = <0x30100>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_31>;
+ l2_31: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_3>;
+ };
};
cpu30200: cpu@30200 {
compatible = "arm,cortex-a78";
@@ -216,6 +524,28 @@ cpu30200: cpu@30200 {
reg = <0x30200>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_32>;
+ l2_32: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_3>;
+ };
};
cpu30300: cpu@30300 {
compatible = "arm,cortex-a78";
@@ -224,7 +554,85 @@ cpu30300: cpu@30300 {
reg = <0x30300>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
+ d-cache-size = <0x10000>; /* 64kB */
+ d-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ d-cache-sets = <256>;
+ i-cache-size = <0x10000>; /* 64kB */
+ i-cache-line-size = <64>;
+ /* 4 ways set associativity */
+ /* cache_size / (line_size / associativity) */
+ i-cache-sets = <256>;
+ next-level-cache = <&l2_33>;
+ l2_33: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>; /* 512kB */
+ cache-line-size = <64>;
+ /* 8 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <1024>;
+ cache-unified;
+ next-level-cache = <&l3_3>;
+ };
};
+
+ l3_0: l3-0-cache { /* cluster private */
+ compatible = "cache";
+ cache-level = <3>;
+ cache-size = <0x200000>; /* 2MB */
+ cache-line-size = <64>;
+ /* 16 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <2048>;
+ cache-unified;
+ next-level-cache = <&llc>;
+ };
+
+ l3_1: l3-1-cache { /* cluster private */
+ compatible = "cache";
+ cache-level = <3>;
+ cache-size = <0x200000>; /* 2MB */
+ cache-line-size = <64>;
+ /* 16 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <2048>;
+ cache-unified;
+ next-level-cache = <&llc>;
+ };
+
+ l3_2: l3-2-cache { /* cluster private */
+ compatible = "cache";
+ cache-level = <3>;
+ cache-size = <0x200000>; /* 2MB */
+ cache-line-size = <64>;
+ /* 16 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <2048>;
+ cache-unified;
+ next-level-cache = <&llc>;
+ };
+
+ l3_3: l3-3-cache { /* cluster private */
+ compatible = "cache";
+ cache-level = <3>;
+ cache-size = <0x200000>; /* 2MB */
+ cache-line-size = <64>;
+ /* 16 ways set associativity */
+ /* cache_size / (line_size/associativity) */
+ cache-sets = <2048>;
+ cache-unified;
+ next-level-cache = <&llc>;
+ };
+
+ llc: l4-cache { /* LLC inside CMN */
+ compatible = "cache";
+ cache-level = <4>;
+ cache-size = <0x1000000>; /* 16MB */
+ cache-unified;
+ };
+
idle-states {
entry-method = "psci";
@@ -556,7 +964,7 @@ rtc: rtc@f12a0000 {
reg = <0 0xf12a0000 0 0x100>;
interrupts = <0 200 4>, <0 201 4>;
interrupt-names = "alarm", "sec";
- calibration = <0x8000>;
+ calibration = <0x7FFF>;
};
sdhci0: mmc@f1040000 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
new file mode 100644
index 0000000..02be5e1
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KD240 revA Carrier Card
+ *
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "xlnx,zynqmp-sk-kd240-rev1",
+ "xlnx,zynqmp-sk-kd240-revB",
+ "xlnx,zynqmp-sk-kd240-revA",
+ "xlnx,zynqmp-sk-kd240", "xlnx,zynqmp";
+ model = "ZynqMP KD240 revA/B/1";
+
+ aliases {
+ ethernet0 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+ };
+
+ ina260-u3 {
+ compatible = "iio-hwmon";
+ io-channels = <&u3 0>, <&u3 1>, <&u3 2>;
+ };
+
+ clk_26: clock2 { /* u17 - USB */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clk_25_0: clock4 { /* u92/u91 - GEM2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clk_25_1: clock5 { /* u92/u91 - GEM3 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ u3: ina260@40 { /* u3 */
+ compatible = "ti,ina260";
+ #io-channel-cells = <1>;
+ label = "ina260-u14";
+ reg = <0x40>;
+ };
+
+ slg7xl45106: gpio@11 { /* u13 - reset logic */
+ compatible = "dlg,slg7xl45106";
+ reg = <0x11>;
+ label = "resetchip";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "USB0_PHY_RESET_B", "",
+ "SD_RESET_B", "USB0_HUB_RESET_B",
+ "", "PS_GEM0_RESET_B",
+ "", "";
+ };
+
+ hub: usb-hub@2d { /* u36 */
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
+};
+
+/* USB 3.0 */
+&psgtr {
+ status = "okay";
+ /* usb */
+ clocks = <&clk_26>;
+ clock-names = "ref2";
+};
+
+&usb0 { /* mio52 - mio63 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+ phy-names = "usb3-phy";
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+ assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gem1 { /* mdio mio50/51 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem1_default>;
+ assigned-clock-rates = <250000000>;
+
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@8 { /* Adin u31 */
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id0283.bc30";
+ reg = <8>;
+ adi,rx-internal-delay-ps = <2000>;
+ adi,tx-internal-delay-ps = <2000>;
+ adi,fifo-depth-bits = <8>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <5000>;
+ reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/* 2 more ethernet phys u32@2 and u34@3 */
+
+&pinctrl0 { /* required by spec */
+ status = "okay";
+
+ pinctrl_can0_default: can0-default {
+ mux {
+ function = "can0";
+ groups = "can0_16_grp";
+ };
+
+ conf {
+ groups = "can0_16_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO66";
+ bias-pull-up;
+ };
+
+ conf-tx {
+ pins = "MIO67";
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ conf {
+ groups = "uart0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO70";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO71";
+ bias-disable;
+ };
+
+ mux {
+ groups = "uart0_17_grp";
+ function = "uart0";
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ conf {
+ groups = "uart1_9_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO37";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO36";
+ bias-disable;
+ output-enable;
+ };
+
+ mux {
+ groups = "uart1_9_grp";
+ function = "uart1";
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ conf {
+ groups = "i2c1_6_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "i2c1_6_grp";
+ function = "i2c1";
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ conf {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ function = "gpio0";
+ };
+ };
+
+ pinctrl_gem1_default: gem1-default {
+ conf {
+ groups = "ethernet1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO45", "MIO46", "MIO47", "MIO48";
+ bias-disable;
+ low-power-disable;
+ };
+
+ conf-bootstrap {
+ pins = "MIO44", "MIO49";
+ bias-disable;
+ output-enable;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO38", "MIO39", "MIO40",
+ "MIO41", "MIO42", "MIO43";
+ bias-disable;
+ output-enable;
+ low-power-enable;
+ };
+
+ conf-mdio {
+ groups = "mdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ output-enable;
+ };
+
+ mux-mdio {
+ function = "mdio1";
+ groups = "mdio1_0_grp";
+ };
+
+ mux {
+ function = "ethernet1";
+ groups = "ethernet1_0_grp";
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ conf {
+ groups = "usb0_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+ };
+
+ pinctrl_usb1_default: usb1-default {
+ conf {
+ groups = "usb1_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO64", "MIO65", "MIO67";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+ "MIO72", "MIO73", "MIO74", "MIO75";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb1_0_grp";
+ function = "usb1";
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ rts-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <10 10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+ assigned-clock-rates = <100000000>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&zynqmp_dpsub {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
new file mode 100644
index 0000000..b92dcb8
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KR260 revA Carrier Card
+ *
+ * (C) Copyright 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "xlnx,zynqmp-sk-kr260-revA",
+ "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp";
+ model = "ZynqMP KR260 revA";
+
+ aliases {
+ ethernet0 = "/axi/ethernet@ff0b0000"; /* &gem0 */
+ ethernet1 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+ };
+
+ ina260-u14 {
+ compatible = "iio-hwmon";
+ io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+ };
+
+ clk_27: clock0 { /* u86 - DP */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ clk_125: si5332-0 { /* u17 - GEM0/1 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk_74: si5332-5 { /* u17 - SLVC-EC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+
+ clk_26: si5332-2 { /* u17 - USB */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clk_156: si5332-3 { /* u17 - SFP+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <156250000>;
+ };
+
+ clk_25_0: si5332-1 { /* u17 - GEM2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clk_25_1: si5332-4 { /* u17 - GEM3 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ u14: ina260@40 { /* u14 */
+ compatible = "ti,ina260";
+ #io-channel-cells = <1>;
+ label = "ina260-u14";
+ reg = <0x40>;
+ };
+
+ slg7xl45106: gpio@11 { /* u19 - reset logic */
+ compatible = "dlg,slg7xl45106";
+ reg = <0x11>;
+ label = "resetchip";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
+ "SD_RESET_B", "USB0_HUB_RESET_B",
+ "USB1_HUB_RESET_B", "PS_GEM0_RESET_B",
+ "PS_GEM1_RESET_B", "";
+ };
+
+ i2c-mux@74 { /* u18 */
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ usbhub_i2c0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ hub_1: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
+ };
+ usbhub_i2c1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ hub_2: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
+ };
+ /* Bus 2/3 are not connected */
+ };
+
+ /* si5332@6a - u17 - clock-generator */
+};
+
+/* GEM SGMII/DP and USB 3.0 */
+&psgtr {
+ status = "okay";
+ /* gem0/1, dp, usb */
+ clocks = <&clk_125>, <&clk_27>, <&clk_26>;
+ clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
+ assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
+
+&zynqmp_dpdma {
+ status = "okay";
+ assigned-clock-rates = <600000000>;
+};
+
+&usb0 { /* mio52 - mio63 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+ phy-names = "usb3-phy";
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+ assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&usb1 { /* mio64 - mio75 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_default>;
+ phy-names = "usb3-phy";
+ phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+ reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
+ assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub1_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub1_3_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub1_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub1_2_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gem0 { /* mdio mio50/51 */
+ status = "okay";
+ phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+ assigned-clock-rates = <250000000>;
+};
+
+&gem1 { /* mdio mio50/51, gem mio38 - mio49 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem1_default>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ assigned-clock-rates = <250000000>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@4 { /* u81 */
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id2000.a231";
+ reg = <4>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ reset-assert-us = <300>;
+ reset-deassert-us = <280>;
+ reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>;
+ };
+ phy1: ethernet-phy@8 { /* u36 */
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id2000.a231";
+ reg = <8>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ reset-assert-us = <100>;
+ reset-deassert-us = <280>;
+ reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/* gem2/gem3 via PL with phys u79@2 and u80@3 */
+
+&pinctrl0 {
+ status = "okay";
+
+ pinctrl_uart1_default: uart1-default {
+ conf {
+ groups = "uart1_9_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO37";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO36";
+ bias-disable;
+ output-enable;
+ };
+
+ mux {
+ groups = "uart1_9_grp";
+ function = "uart1";
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ conf {
+ groups = "i2c1_6_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "i2c1_6_grp";
+ function = "i2c1";
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ conf {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ function = "gpio0";
+ };
+ };
+
+ pinctrl_gem1_default: gem1-default {
+ conf {
+ groups = "ethernet1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO44", "MIO46", "MIO48";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-bootstrap {
+ pins = "MIO45", "MIO47", "MIO49";
+ bias-disable;
+ output-enable;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO38", "MIO39", "MIO40",
+ "MIO41", "MIO42", "MIO43";
+ bias-disable;
+ output-enable;
+ low-power-enable;
+ };
+
+ conf-mdio {
+ groups = "mdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ output-enable;
+ };
+
+ mux-mdio {
+ function = "mdio1";
+ groups = "mdio1_0_grp";
+ };
+
+ mux {
+ function = "ethernet1";
+ groups = "ethernet1_0_grp";
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ conf {
+ groups = "usb0_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+ };
+
+ pinctrl_usb1_default: usb1-default {
+ conf {
+ groups = "usb1_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO64", "MIO65", "MIO67";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+ "MIO72", "MIO73", "MIO74", "MIO75";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb1_0_grp";
+ function = "usb1";
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
new file mode 100644
index 0000000..99ad220
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KR260 revB Carrier Card (A03 revision)
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "xlnx,zynqmp-sk-kr260-revB",
+ "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp";
+ model = "ZynqMP KR260 revB";
+
+ aliases {
+ ethernet0 = "/axi/ethernet@ff0b0000"; /* &gem0 */
+ ethernet1 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+ };
+
+ ina260-u14 {
+ compatible = "iio-hwmon";
+ io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+ };
+
+ clk_125: clock0 { /* u87 - GEM0/1 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk_27: clock1 { /* u86 - DP */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ clk_26: clock2 { /* u89 - USB */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clk_156: clock3 { /* u90 - SFP+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <156250000>;
+ };
+
+ clk_25_0: clock4 { /* u92/u91 - GEM2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clk_25_1: clock5 { /* u92/u91 - GEM3 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clk_74: clock6 { /* u88 - SLVC-EC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ u14: ina260@40 { /* u14 */
+ compatible = "ti,ina260";
+ #io-channel-cells = <1>;
+ label = "ina260-u14";
+ reg = <0x40>;
+ };
+
+ slg7xl45106: gpio@11 { /* u19 - reset logic */
+ compatible = "dlg,slg7xl45106";
+ reg = <0x11>;
+ label = "resetchip";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
+ "SD_RESET_B", "USB0_HUB_RESET_B",
+ "USB1_HUB_RESET_B", "PS_GEM0_RESET_B",
+ "PS_GEM1_RESET_B", "";
+ };
+
+ i2c-mux@74 { /* u18 */
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ usbhub_i2c0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ hub_1: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
+ };
+ usbhub_i2c1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ hub_2: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
+ };
+ /* Bus 2/3 are not connected */
+ };
+
+ /* si5332@6a - u17 - clock-generator */
+};
+
+/* GEM SGMII/DP and USB 3.0 */
+&psgtr {
+ status = "okay";
+ /* gem0/1, dp, usb */
+ clocks = <&clk_125>, <&clk_27>, <&clk_26>;
+ clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+ status = "okay";
+ phy-names = "dp-phy0";
+ phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
+ assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
+
+&zynqmp_dpdma {
+ status = "okay";
+ assigned-clock-rates = <600000000>;
+};
+
+&usb0 { /* mio52 - mio63 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+ phy-names = "usb3-phy";
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+ assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub_1>;
+ reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&usb1 { /* mio64 - mio75 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_default>;
+ phy-names = "usb3-phy";
+ phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+ reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
+ assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub1_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub1_3_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub1_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub1_2_0>;
+ i2c-bus = <&hub_2>;
+ reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gem0 { /* mdio mio50/51 */
+ status = "okay";
+ phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+ assigned-clock-rates = <250000000>;
+};
+
+&gem1 { /* mdio mio50/51, gem mio38 - mio49 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem1_default>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ assigned-clock-rates = <250000000>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@4 { /* u81 */
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id2000.a231";
+ reg = <4>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ reset-assert-us = <300>;
+ reset-deassert-us = <280>;
+ reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>;
+ };
+ phy1: ethernet-phy@8 { /* u36 */
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id2000.a231";
+ reg = <8>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ reset-assert-us = <100>;
+ reset-deassert-us = <280>;
+ reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/* gem2/gem3 via PL with phys u79@2 and u80@3 */
+
+&pinctrl0 {
+ status = "okay";
+
+ pinctrl_uart1_default: uart1-default {
+ conf {
+ groups = "uart1_9_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO37";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO36";
+ bias-disable;
+ output-enable;
+ };
+
+ mux {
+ groups = "uart1_9_grp";
+ function = "uart1";
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ conf {
+ groups = "i2c1_6_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "i2c1_6_grp";
+ function = "i2c1";
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ conf {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux {
+ groups = "gpio0_24_grp", "gpio0_25_grp";
+ function = "gpio0";
+ };
+ };
+
+ pinctrl_gem1_default: gem1-default {
+ conf {
+ groups = "ethernet1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO44", "MIO46", "MIO48";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-bootstrap {
+ pins = "MIO45", "MIO47", "MIO49";
+ bias-disable;
+ output-enable;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO38", "MIO39", "MIO40",
+ "MIO41", "MIO42", "MIO43";
+ bias-disable;
+ output-enable;
+ low-power-enable;
+ };
+
+ conf-mdio {
+ groups = "mdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ output-enable;
+ };
+
+ mux-mdio {
+ function = "mdio1";
+ groups = "mdio1_0_grp";
+ };
+
+ mux {
+ function = "ethernet1";
+ groups = "ethernet1_0_grp";
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ conf {
+ groups = "usb0_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+ };
+
+ pinctrl_usb1_default: usb1-default {
+ conf {
+ groups = "usb1_0_grp";
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO64", "MIO65", "MIO67";
+ bias-high-impedance;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
+ };
+
+ conf-tx {
+ pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+ "MIO72", "MIO73", "MIO74", "MIO75";
+ bias-disable;
+ output-enable;
+ drive-strength = <4>;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+
+ mux {
+ groups = "usb1_0_grp";
+ function = "usb1";
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 95d1690..d7351a1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -28,6 +28,10 @@
"xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
model = "ZynqMP KV260 revA";
+ aliases {
+ ethernet0 = "/axi/ethernet@ff0e0000"; /* &gem3 */
+ };
+
ina260-u14 {
compatible = "iio-hwmon";
io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -68,6 +72,17 @@ si5332_5: si5332-5 { /* u17 */
#clock-cells = <0>;
clock-frequency = <27000000>;
};
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -118,6 +133,12 @@ &zynqmp_dpsub {
assigned-clock-rates = <27000000>, <25000000>, <300000000>;
};
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
+
&zynqmp_dpdma {
status = "okay";
assigned-clock-rates = <600000000>;
@@ -129,7 +150,6 @@ &usb0 {
pinctrl-0 = <&pinctrl_usb0_default>;
phy-names = "usb3-phy";
phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
- /* missing usb5744 - u43 */
};
&dwc3_0 {
@@ -137,6 +157,24 @@ &dwc3_0 {
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
};
&sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a74d0ac7e..a4ae37e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -23,6 +23,10 @@
"xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
model = "ZynqMP KV260 revB";
+ aliases {
+ ethernet0 = "/axi/ethernet@ff0e0000"; /* &gem3 */
+ };
+
ina260-u14 {
compatible = "iio-hwmon";
io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -92,7 +96,10 @@ u14: ina260@40 { /* u14 */
label = "ina260-u14";
reg = <0x40>;
};
- /* u43 - 0x2d - USB hub */
+ hub: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
};
@@ -109,13 +116,11 @@ &zynqmp_dpsub {
phy-names = "dp-phy0", "dp-phy1";
phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
- ports {
- port@5 {
- dpsub_dp_out: endpoint {
- remote-endpoint = <&dpcon_in>;
- };
- };
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
};
};
@@ -138,6 +143,26 @@ &dwc3_0 {
dr_mode = "host";
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
};
&sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts
new file mode 100644
index 0000000..653bd93
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SM-K24 RevA
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2022, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k26-revA.dts"
+
+/ {
+ model = "ZynqMP SM-K24 RevA/B/1";
+ compatible = "xlnx,zynqmp-sm-k24-rev1", "xlnx,zynqmp-sm-k24-revB",
+ "xlnx,zynqmp-sm-k24-revA", "xlnx,zynqmp-sm-k24",
+ "xlnx,zynqmp";
+
+ memory@0 {
+ device_type = "memory"; /* 2GB */
+ reg = <0 0 0 0x80000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index bfa7ea6..500af1d2 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -90,10 +90,10 @@ ds36-led {
};
};
- pwm-fan {
+ pwm_fan: pwm-fan {
compatible = "pwm-fan";
status = "okay";
- pwms = <&ttc0 2 40000 0>;
+ pwms = <&ttc0 2 40000 1>;
};
};
@@ -233,6 +233,9 @@ &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
pinctrl-0 = <&pinctrl_sdhci0_default>;
non-removable;
disable-wp;
+ no-sd;
+ no-sdio;
+ cap-mmc-hw-reset;
bus-width = <8>;
xlnx,mio-bank = <0>;
assigned-clock-rates = <187498123>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts
new file mode 100644
index 0000000..7308983b
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SMK-K24 RevA
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2022, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k24-revA.dts"
+
+/ {
+ model = "ZynqMP SMK-K24 RevA";
+ compatible = "xlnx,zynqmp-smk-k24-revA", "xlnx,zynqmp-smk-k24",
+ "xlnx,zynqmp";
+};
+
+&sdhci0 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 1850325..2ad7423 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -135,7 +135,6 @@ &nand0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand0_default>;
- arasan,has-mdma;
nand@0 {
reg = <0x0>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index f553b31..8fbc335 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -129,7 +129,6 @@ &i2c1 {
/* MT29F64G08AECDBJ4-6 */
&nand0 {
status = "okay";
- arasan,has-mdma;
num-cs = <2>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 62c2503..4ec8a40 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -134,6 +134,18 @@ si5335_1: si5335-1 { /* clk1_dp - u23 */
#clock-cells = <0>;
clock-frequency = <27000000>;
};
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&dcc {
@@ -509,6 +521,9 @@ &sdhci1 {
xlnx,mio-bank = <0>;
non-removable;
disable-wp;
+ no-sd;
+ no-sdio;
+ cap-mmc-hw-reset;
cap-power-off-card;
mmc-pwrseq = <&sdio_pwrseq>;
vqmmc-supply = <&wmmcsdio_fixed>;
@@ -604,3 +619,9 @@ &zynqmp_dpsub {
phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
<&psgtr 0 PHY_TYPE_DP 1 1>;
};
+
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7e26489..e172a30 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -151,6 +151,18 @@ refhdmi: refhdmi {
#clock-cells = <0>;
clock-frequency = <114285000>;
};
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&can1 {
@@ -1045,3 +1057,9 @@ &zynqmp_dpsub {
phy-names = "dp-phy0";
phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
};
+
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index eb20906..fe8f151 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -60,6 +60,18 @@ clock_8t49n287_3: clk27 {
#clock-cells = <0>;
clock-frequency = <27000000>;
};
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&can1 {
@@ -529,3 +541,9 @@ &zynqmp_dpsub {
phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
<&psgtr 0 PHY_TYPE_DP 1 3>;
};
+
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 4694d0a..3ee8ab2 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -65,6 +65,18 @@ clock_8t49n287_3: clk27 {
#clock-cells = <0>;
clock-frequency = <27000000>;
};
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&can1 {
@@ -541,3 +553,9 @@ &zynqmp_dpsub {
phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
<&psgtr 0 PHY_TYPE_DP 1 3>;
};
+
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 7beedd7..7f6c87d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -808,8 +808,8 @@ conf-tx {
pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
"MIO60", "MIO61", "MIO62", "MIO63";
bias-disable;
- drive-strength = <4>;
- slew-rate = <SLEW_RATE_SLOW>;
+ drive-strength = <12>;
+ slew-rate = <SLEW_RATE_FAST>;
};
};
@@ -1042,12 +1042,10 @@ &zynqmp_dpsub {
phy-names = "dp-phy0", "dp-phy1";
phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
<&psgtr 0 PHY_TYPE_DP 1 3>;
+};
- ports {
- port@5 {
- dpsub_dp_out: endpoint {
- remote-endpoint = <&dpcon_in>;
- };
- };
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index b67ff7e..428b555 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -129,6 +129,18 @@ ref48: ref48M {
#clock-cells = <0>;
clock-frequency = <48000000>;
};
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&dcc {
@@ -494,7 +506,7 @@ i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
- sc18is603@2f { /* sc18is602 - u93 */
+ sc18is603: spi@2f { /* sc18is602 - u93 */
compatible = "nxp,sc18is603";
reg = <0x2f>;
/* 4 gpios for CS not handled by driver */
@@ -864,3 +876,9 @@ &zynqmp_dpsub {
phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
<&psgtr 0 PHY_TYPE_DP 1 1>;
};
+
+&out_dp {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index e11d282..938b014c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -187,7 +187,7 @@ pmu {
};
psci {
- compatible = "arm,psci-0.2";
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
@@ -550,6 +550,7 @@ cpu0_debug: debug@fec10000 {
reg = <0x0 0xfec10000 0x0 0x1000>;
clock-names = "apb_pclk";
cpu = <&cpu0>;
+ status = "disabled";
};
cpu1_debug: debug@fed10000 {
@@ -557,6 +558,7 @@ cpu1_debug: debug@fed10000 {
reg = <0x0 0xfed10000 0x0 0x1000>;
clock-names = "apb_pclk";
cpu = <&cpu1>;
+ status = "disabled";
};
cpu2_debug: debug@fee10000 {
@@ -564,6 +566,7 @@ cpu2_debug: debug@fee10000 {
reg = <0x0 0xfee10000 0x0 0x1000>;
clock-names = "apb_pclk";
cpu = <&cpu2>;
+ status = "disabled";
};
cpu3_debug: debug@fef10000 {
@@ -571,6 +574,7 @@ cpu3_debug: debug@fef10000 {
reg = <0x0 0xfef10000 0x0 0x1000>;
clock-names = "apb_pclk";
cpu = <&cpu3>;
+ status = "disabled";
};
/* GDMA */
@@ -1319,22 +1323,22 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ live_video: port@0 {
reg = <0>;
};
- port@1 {
+ live_gfx: port@1 {
reg = <1>;
};
- port@2 {
+ live_audio: port@2 {
reg = <2>;
};
- port@3 {
+ out_video: port@3 {
reg = <3>;
};
- port@4 {
+ out_audio: port@4 {
reg = <4>;
};
- port@5 {
+ out_dp: port@5 {
reg = <5>;
};
};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 58f87d0..e3a2d37 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -38,6 +38,7 @@
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_APPLE=y
+CONFIG_ARCH_ARTPEC=y
CONFIG_ARCH_AXIADO=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
@@ -441,6 +442,7 @@
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
CONFIG_MT7921E=m
CONFIG_RSI_91X=m
CONFIG_WL18XX=m
@@ -499,6 +501,7 @@
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_RSCI=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
@@ -579,6 +582,7 @@
CONFIG_SPI_ROCKCHIP_SFC=m
CONFIG_SPI_RPCIF=m
CONFIG_SPI_RSPI=m
+CONFIG_SPI_RZV2H_RSPI=m
CONFIG_SPI_RZV2M_CSI=m
CONFIG_SPI_QCOM_QSPI=m
CONFIG_SPI_QUP=y
@@ -592,6 +596,8 @@
CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
CONFIG_SPMI_MTK_PMIF=m
+CONFIG_PINCTRL_BRCMSTB=y
+CONFIG_PINCTRL_BCM2712=y
CONFIG_PINCTRL_DA9062=m
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_RK805=m
@@ -607,6 +613,7 @@
CONFIG_PINCTRL_IMX8QXP=y
CONFIG_PINCTRL_IMX8DXL=y
CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_IMX91=y
CONFIG_PINCTRL_IMX93=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_IPQ5018=y
@@ -1300,6 +1307,7 @@
CONFIG_RZ_DMAC=y
CONFIG_TI_K3_UDMA=y
CONFIG_TI_K3_UDMA_GLUE_LAYER=y
+CONFIG_STM32_DMA3=m
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
CONFIG_VIRTIO_PCI=y
@@ -1360,6 +1368,7 @@
CONFIG_CLK_X1E80100_GCC=y
CONFIG_CLK_X1E80100_GPUCC=m
CONFIG_CLK_X1E80100_TCSRCC=y
+CONFIG_CLK_X1P42100_GPUCC=m
CONFIG_CLK_QCM2290_GPUCC=m
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
@@ -1385,11 +1394,15 @@
CONFIG_MSM_MMCC_8998=m
CONFIG_QCM_GCC_2290=y
CONFIG_QCM_DISPCC_2290=m
+CONFIG_QCS_DISPCC_615=m
+CONFIG_QCS_CAMCC_615=m
CONFIG_QCS_GCC_404=y
CONFIG_QCS_GCC_615=y
CONFIG_QCS_GCC_8300=y
CONFIG_SC_CAMCC_7280=m
CONFIG_SA_CAMCC_8775P=m
+CONFIG_QCS_GPUCC_615=m
+CONFIG_QCS_VIDEOCC_615=m
CONFIG_QDU_GCC_1000=y
CONFIG_SC_CAMCC_8280XP=m
CONFIG_SC_DISPCC_7280=m
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 61ceae0a..848e714 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -7,6 +7,12 @@
help
This enables support for Andes SoC platform hardware.
+config ARCH_ESWIN
+ bool "ESWIN SoCs"
+ help
+ This enables support for ESWIN SoC platform hardware,
+ including the ESWIN EIC7700 SoC.
+
config ARCH_MICROCHIP_POLARFIRE
def_bool ARCH_MICROCHIP
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 3b99e91e..3763d19 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -2,6 +2,7 @@
subdir-y += allwinner
subdir-y += andes
subdir-y += canaan
+subdir-y += eswin
subdir-y += microchip
subdir-y += renesas
subdir-y += sifive
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index e4175ad..63e252b 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -79,6 +79,36 @@ dsi_4lane_pins: dsi-4lane-pins {
};
/omit-if-no-ref/
+ i2c2_pd_pins: i2c2-pd-pins {
+ pins = "PD20", "PD21";
+ function = "i2c2";
+ };
+
+ /omit-if-no-ref/
+ i2c3_pg_pins: i2c3-pg-pins {
+ pins = "PG10", "PG11";
+ function = "i2c3";
+ };
+
+ /omit-if-no-ref/
+ i2s1_pins: i2s1-pins {
+ pins = "PG12", "PG13";
+ function = "i2s1";
+ };
+
+ /omit-if-no-ref/
+ i2s1_din0_pin: i2s1-din0-pin {
+ pins = "PG14";
+ function = "i2s1_din";
+ };
+
+ /omit-if-no-ref/
+ i2s1_dout0_pin: i2s1-dout0-pin {
+ pins = "PG15";
+ function = "i2s1_dout";
+ };
+
+ /omit-if-no-ref/
lcd_rgb666_pins: lcd-rgb666-pins {
pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
"PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
@@ -127,6 +157,24 @@ spi0_pins: spi0-pins {
};
/omit-if-no-ref/
+ spi1_pins: spi1-pins {
+ pins = "PD10", "PD11", "PD12", "PD13";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_hold_pin: spi1-hold-pin {
+ pins = "PD14";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
+ spi1_wp_pin: spi1-wp-pin {
+ pins = "PD15";
+ function = "spi1";
+ };
+
+ /omit-if-no-ref/
uart1_pg6_pins: uart1-pg6-pins {
pins = "PG6", "PG7";
function = "uart1";
diff --git a/arch/riscv/boot/dts/eswin/Makefile b/arch/riscv/boot/dts/eswin/Makefile
new file mode 100644
index 0000000..224101a
--- /dev/null
+++ b/arch/riscv/boot/dts/eswin/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ESWIN) += eic7700-hifive-premier-p550.dtb
diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
new file mode 100644
index 0000000..131ed1f
--- /dev/null
+++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2024, Beijing ESWIN Computing Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "eic7700.dtsi"
+
+/ {
+ compatible = "sifive,hifive-premier-p550", "eswin,eic7700";
+ model = "SiFive HiFive Premier P550";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
new file mode 100644
index 0000000..c3ed930
--- /dev/null
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2024 Beijing ESWIN Computing Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <1000000>;
+
+ cpu0: cpu@0 {
+ compatible = "sifive,p550", "riscv";
+ device_type = "cpu";
+ d-cache-block-size = <64>;
+ d-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv48";
+ next-level-cache = <&l2_cache_0>;
+ reg = <0x0>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+ "zba", "zbb", "zicsr", "zifencei";
+ tlb-split;
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu1: cpu@1 {
+ compatible = "sifive,p550", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv48";
+ next-level-cache = <&l2_cache_1>;
+ reg = <0x1>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+ "zba", "zbb", "zicsr", "zifencei";
+ tlb-split;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu2: cpu@2 {
+ compatible = "sifive,p550", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv48";
+ next-level-cache = <&l2_cache_2>;
+ reg = <0x2>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+ "zba", "zbb", "zicsr", "zifencei";
+ tlb-split;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu3: cpu@3 {
+ compatible = "sifive,p550", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv48";
+ next-level-cache = <&l2_cache_3>;
+ reg = <0x3>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+ "zba", "zbb", "zicsr", "zifencei";
+ tlb-split;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ l2_cache_0: l2-cache0 {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <512>;
+ cache-size = <262144>;
+ cache-unified;
+ next-level-cache = <&ccache>;
+ };
+
+ l2_cache_1: l2-cache1 {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <512>;
+ cache-size = <262144>;
+ cache-unified;
+ next-level-cache = <&ccache>;
+ };
+
+ l2_cache_2: l2-cache2 {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <512>;
+ cache-size = <262144>;
+ cache-unified;
+ next-level-cache = <&ccache>;
+ };
+
+ l2_cache_3: l2-cache3 {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <512>;
+ cache-size = <262144>;
+ cache-unified;
+ next-level-cache = <&ccache>;
+ };
+ };
+
+ pmu {
+ compatible = "riscv,pmu";
+ riscv,event-to-mhpmcounters =
+ <0x00001 0x00001 0x00000001>,
+ <0x00002 0x00002 0x00000004>,
+ <0x00004 0x00006 0x00000078>,
+ <0x10009 0x10009 0x00000078>,
+ <0x10019 0x10019 0x00000078>,
+ <0x10021 0x10021 0x00000078>;
+ riscv,event-to-mhpmevent =
+ <0x00004 0x00000000 0x00000202>,
+ <0x00005 0x00000000 0x00004000>,
+ <0x00006 0x00000000 0x00002001>,
+ <0x10009 0x00000000 0x00000102>,
+ <0x10019 0x00000000 0x00001002>,
+ <0x10021 0x00000000 0x00000802>;
+ riscv,raw-event-to-mhpmcounters =
+ <0x00000000 0x00000000 0xffffffff 0xfc0000ff 0x00000078>,
+ <0x00000000 0x00000001 0xffffffff 0xfffe07ff 0x00000078>,
+ <0x00000000 0x00000002 0xffffffff 0xfffe00ff 0x00000078>,
+ <0x00000000 0x00000003 0xfffffffc 0x000000ff 0x00000078>,
+ <0x00000000 0x00000004 0xffffffc0 0x000000ff 0x00000078>,
+ <0x00000000 0x00000005 0xffffffff 0xfffffdff 0x00000078>,
+ <0x00000000 0x00000006 0xfffffe00 0x110204ff 0x00000078>,
+ <0x00000000 0x00000007 0xffffffff 0xf00000ff 0x00000078>,
+ <0x00000000 0x00000008 0xfffffe04 0x000000ff 0x00000078>,
+ <0x00000000 0x00000009 0xffffffff 0xffffc0ff 0x00000078>,
+ <0x00000000 0x0000000a 0xffffffff 0xf00000ff 0x00000078>,
+ <0x00000000 0x0000000b 0xffffffff 0xfffffcff 0x00000078>,
+ <0x00000000 0x0000000c 0xfffffff0 0x000000ff 0x00000078>,
+ <0x00000000 0x0000000d 0xffffffff 0x800000ff 0x00000078>,
+ <0x00000000 0x0000000e 0xffffffff 0xf80000ff 0x00000078>,
+ <0x00000000 0x0000000f 0xfffffffc 0x000000ff 0x00000078>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-noncoherent;
+
+ clint: timer@2000000 {
+ compatible = "eswin,eic7700-clint", "sifive,clint0";
+ reg = <0x0 0x02000000 0x0 0x10000>;
+ interrupts-extended =
+ <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>;
+ };
+
+ ccache: cache-controller@2010000 {
+ compatible = "eswin,eic7700-l3-cache", "sifive,ccache0", "cache";
+ reg = <0x0 0x2010000 0x0 0x4000>;
+ interrupts = <1>, <3>, <4>, <2>;
+ cache-block-size = <64>;
+ cache-level = <3>;
+ cache-sets = <4096>;
+ cache-size = <4194304>;
+ cache-unified;
+ };
+
+ plic: interrupt-controller@c000000 {
+ compatible = "eswin,eic7700-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ interrupt-controller;
+ interrupts-extended =
+ <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>;
+ riscv,ndev = <520>;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ uart0: serial@50900000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x50900000 0x0 0x10000>;
+ interrupts = <100>;
+ clock-frequency = <200000000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart1: serial@50910000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x50910000 0x0 0x10000>;
+ interrupts = <101>;
+ clock-frequency = <200000000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@50920000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x50920000 0x0 0x10000>;
+ interrupts = <102>;
+ clock-frequency = <200000000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@50930000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x50930000 0x0 0x10000>;
+ interrupts = <103>;
+ clock-frequency = <200000000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@50940000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x50940000 0x0 0x10000>;
+ interrupts = <104>;
+ clock-frequency = <200000000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ gpio@51600000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0x51600000 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpioA: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts =
+ <303>, <304>, <305>, <306>, <307>, <308>, <309>,
+ <310>, <311>, <312>, <313>, <314>, <315>, <316>,
+ <317>, <318>, <319>, <320>, <321>, <322>, <323>,
+ <324>, <325>, <326>, <327>, <328>, <329>, <330>,
+ <331>, <332>, <333>, <334>;
+ gpio-controller;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ };
+
+ gpioB: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <1>;
+ gpio-controller;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ };
+
+ gpioC: gpio-port@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <2>;
+ gpio-controller;
+ ngpios = <32>;
+ #gpio-cells = <2>;
+ };
+
+ gpioD: gpio-port@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <3>;
+ gpio-controller;
+ ngpios = <16>;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index f51aeeb..345ed7a 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,6 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-disco-kit.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit-prod.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
index 47cf693..55e30f3 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
@@ -88,7 +88,7 @@ &gpio2 {
<53>, <53>, <53>, <53>,
<53>, <53>, <53>, <53>,
<53>, <53>, <53>, <53>;
- ngpios=<32>;
+ ngpios = <32>;
gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2",
"P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5",
"P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8",
diff --git a/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi
new file mode 100644
index 0000000..ae8be7d6
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2025 Microchip Technology Inc */
+
+/ {
+ core_pwm0: pwm@40000000 {
+ compatible = "microchip,corepwm-rtl-v4";
+ reg = <0x0 0x40000000 0x0 0xF0>;
+ microchip,sync-update-mask = /bits/ 32 <0>;
+ #pwm-cells = <3>;
+ clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@40000200 {
+ compatible = "microchip,corei2c-rtl-v7";
+ reg = <0x0 0x40000200 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>;
+ interrupt-parent = <&plic>;
+ interrupts = <122>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ ihc: mailbox {
+ compatible = "microchip,sbi-ipc";
+ interrupt-parent = <&plic>;
+ interrupts = <180>, <179>, <178>, <177>;
+ interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+ #mbox-cells = <1>;
+ status = "disabled";
+ };
+
+ mailbox@50000000 {
+ compatible = "microchip,miv-ihc-rtl-v2";
+ reg = <0x0 0x50000000 0x0 0x1c000>;
+ interrupt-parent = <&plic>;
+ interrupts = <180>, <179>, <178>, <177>;
+ interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+ #mbox-cells = <1>;
+ microchip,ihc-chan-disabled-mask = /bits/ 16 <0>;
+ status = "disabled";
+ };
+
+ refclk_ccc: clock-cccref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
+
+&ccc_sw {
+ clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+ <&refclk_ccc>, <&refclk_ccc>;
+ clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+ "dll0_ref", "dll1_ref";
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts
new file mode 100644
index 0000000..c068b9b
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2025 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-disco-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Microchip PolarFire-SoC Discovery Kit";
+ compatible = "microchip,mpfs-disco-kit-reference-rtl-v2507",
+ "microchip,mpfs-disco-kit",
+ "microchip,mpfs";
+
+ aliases {
+ ethernet0 = &mac0;
+ serial4 = &mmuart4;
+ };
+
+ chosen {
+ stdout-path = "serial4:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led1";
+ };
+
+ led-2 {
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led2";
+ };
+
+ led-3 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led3";
+ };
+
+ led-4 {
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led4";
+ };
+
+ led-5 {
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led5";
+ };
+
+ led-6 {
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led6";
+ };
+
+ led-7 {
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led7";
+ };
+
+ led-8 {
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led8";
+ };
+ };
+
+ ddrc_cache_lo: memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hss_payload: region@bfc00000 {
+ reg = <0x0 0xbfc00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+};
+
+&core_pwm0 {
+ status = "okay";
+};
+
+&gpio1 {
+ interrupts = <27>, <28>, <29>, <30>,
+ <31>, <32>, <33>, <47>,
+ <35>, <36>, <37>, <38>,
+ <39>, <40>, <41>, <42>,
+ <43>, <44>, <45>, <46>,
+ <47>, <48>, <49>, <50>;
+ status = "okay";
+};
+
+&gpio2 {
+ interrupts = <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&ihc {
+ status = "okay";
+};
+
+&mac0 {
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@b {
+ reg = <0xb>;
+ };
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ no-1-8-v;
+ status = "okay";
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&mmuart4 {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+ clock-frequency = <50000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&syscontroller {
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi
new file mode 100644
index 0000000..e01a216
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2025 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ ethernet0 = &mac1;
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led1";
+ };
+
+ led-2 {
+ gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ label = "led2";
+ };
+
+ led-3 {
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led3";
+ };
+
+ led-4 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_AMBER>;
+ label = "led4";
+ };
+ };
+
+ ddrc_cache_lo: memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ };
+
+ ddrc_cache_hi: memory@1040000000 {
+ device_type = "memory";
+ reg = <0x10 0x40000000 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hss_payload: region@bfc00000 {
+ reg = <0x0 0xbfc00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+};
+
+&core_pwm0 {
+ status = "okay";
+};
+
+&gpio2 {
+ interrupts = <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ power-monitor@10 {
+ compatible = "microchip,pac1934";
+ reg = <0x10>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDREG";
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDA25";
+ };
+
+ channel@3 {
+ reg = <0x3>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDD25";
+ };
+
+ channel@4 {
+ reg = <0x4>;
+ shunt-resistor-micro-ohms = <10000>;
+ label = "VDDA_REG";
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&ihc {
+ status = "okay";
+};
+
+&mac0 {
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+ status = "okay";
+};
+
+&mac1 {
+ phy-mode = "sgmii";
+ phy-handle = <&phy1>;
+ status = "okay";
+
+ phy1: ethernet-phy@9 {
+ reg = <9>;
+ };
+
+ phy0: ethernet-phy@8 {
+ reg = <8>;
+ };
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&mmuart2 {
+ status = "okay";
+};
+
+&mmuart3 {
+ status = "okay";
+};
+
+&mmuart4 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+ clock-frequency = <50000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&syscontroller {
+ status = "okay";
+};
+
+&syscontroller_qspi {
+ /*
+ * The flash *is* there, but Icicle kits that have engineering sample
+ * silicon (write?) access to this flash to non-functional. The system
+ * controller itself can actually access it, but the MSS cannot write
+ * an image there. Instantiating a coreQSPI in the fabric & connecting
+ * it to the flash instead should work though. Pre-production or later
+ * silicon does not have this issue.
+ */
+ status = "disabled";
+
+ sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ };
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
index a6dda55..71f7243 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -2,9 +2,6 @@
/* Copyright (c) 2020-2021 Microchip Technology Inc */
/ {
- compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
- "microchip,mpfs";
-
core_pwm0: pwm@40000000 {
compatible = "microchip,corepwm-rtl-v4";
reg = <0x0 0x40000000 0x0 0xF0>;
@@ -26,6 +23,26 @@ i2c2: i2c@40000200 {
status = "disabled";
};
+ ihc: mailbox {
+ compatible = "microchip,sbi-ipc";
+ interrupt-parent = <&plic>;
+ interrupts = <180>, <179>, <178>, <177>;
+ interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+ #mbox-cells = <1>;
+ status = "disabled";
+ };
+
+ mailbox@50000000 {
+ compatible = "microchip,miv-ihc-rtl-v2";
+ reg = <0x0 0x50000000 0x0 0x1c000>;
+ interrupt-parent = <&plic>;
+ interrupts = <180>, <179>, <178>, <177>;
+ interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+ #mbox-cells = <1>;
+ microchip,ihc-chan-disabled-mask = /bits/ 16 <0>;
+ status = "disabled";
+ };
+
pcie: pcie@3000000000 {
compatible = "microchip,pcie-host-1.0";
#address-cells = <0x3>;
@@ -57,7 +74,7 @@ pcie_intc: interrupt-controller {
};
};
- refclk_ccc: cccrefclk {
+ refclk_ccc: clock-cccref {
compatible = "fixed-clock";
#clock-cells = <0>;
};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts
new file mode 100644
index 0000000..8afedec
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2025 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs-icicle-kit-common.dtsi"
+
+/ {
+ model = "Microchip PolarFire-SoC Icicle Kit (Production Silicon)";
+ compatible = "microchip,mpfs-icicle-prod-reference-rtl-v2507",
+ "microchip,mpfs-icicle-kit-prod",
+ "microchip,mpfs-icicle-kit",
+ "microchip,mpfs-prod",
+ "microchip,mpfs";
+};
+
+&syscontroller {
+ microchip,bitstream-flash = <&sys_ctrl_flash>;
+};
+
+&syscontroller_qspi {
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index f80df22..556aa96 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -3,249 +3,11 @@
/dts-v1/;
-#include "mpfs.dtsi"
-#include "mpfs-icicle-kit-fabric.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
+#include "mpfs-icicle-kit-common.dtsi"
/ {
model = "Microchip PolarFire-SoC Icicle Kit";
- compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+ compatible = "microchip,mpfs-icicle-es-reference-rtl-v2507",
+ "microchip,mpfs-icicle-kit",
"microchip,mpfs";
-
- aliases {
- ethernet0 = &mac1;
- serial0 = &mmuart0;
- serial1 = &mmuart1;
- serial2 = &mmuart2;
- serial3 = &mmuart3;
- serial4 = &mmuart4;
- };
-
- chosen {
- stdout-path = "serial1:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-1 {
- gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- label = "led1";
- };
-
- led-2 {
- gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- label = "led2";
- };
-
- led-3 {
- gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- label = "led3";
- };
-
- led-4 {
- gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- label = "led4";
- };
- };
-
- ddrc_cache_lo: memory@80000000 {
- device_type = "memory";
- reg = <0x0 0x80000000 0x0 0x40000000>;
- status = "okay";
- };
-
- ddrc_cache_hi: memory@1040000000 {
- device_type = "memory";
- reg = <0x10 0x40000000 0x0 0x40000000>;
- status = "okay";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- hss_payload: region@BFC00000 {
- reg = <0x0 0xBFC00000 0x0 0x400000>;
- no-map;
- };
- };
-};
-
-&core_pwm0 {
- status = "okay";
-};
-
-&gpio2 {
- interrupts = <53>, <53>, <53>, <53>,
- <53>, <53>, <53>, <53>,
- <53>, <53>, <53>, <53>,
- <53>, <53>, <53>, <53>,
- <53>, <53>, <53>, <53>,
- <53>, <53>, <53>, <53>,
- <53>, <53>, <53>, <53>,
- <53>, <53>, <53>, <53>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-
- power-monitor@10 {
- compatible = "microchip,pac1934";
- reg = <0x10>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- channel@1 {
- reg = <0x1>;
- shunt-resistor-micro-ohms = <10000>;
- label = "VDDREG";
- };
-
- channel@2 {
- reg = <0x2>;
- shunt-resistor-micro-ohms = <10000>;
- label = "VDDA25";
- };
-
- channel@3 {
- reg = <0x3>;
- shunt-resistor-micro-ohms = <10000>;
- label = "VDD25";
- };
-
- channel@4 {
- reg = <0x4>;
- shunt-resistor-micro-ohms = <10000>;
- label = "VDDA_REG";
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&mac0 {
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
- status = "okay";
-};
-
-&mac1 {
- phy-mode = "sgmii";
- phy-handle = <&phy1>;
- status = "okay";
-
- phy1: ethernet-phy@9 {
- reg = <9>;
- };
-
- phy0: ethernet-phy@8 {
- reg = <8>;
- };
-};
-
-&mbox {
- status = "okay";
-};
-
-&mmc {
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&mmuart1 {
- status = "okay";
-};
-
-&mmuart2 {
- status = "okay";
-};
-
-&mmuart3 {
- status = "okay";
-};
-
-&mmuart4 {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
-
-&qspi {
- status = "okay";
-};
-
-&refclk {
- clock-frequency = <125000000>;
-};
-
-&refclk_ccc {
- clock-frequency = <50000000>;
-};
-
-&rtc {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-};
-
-&syscontroller {
- status = "okay";
-};
-
-&syscontroller_qspi {
- /*
- * The flash *is* there, but Icicle kits that have engineering sample
- * silicon (write?) access to this flash to non-functional. The system
- * controller itself can actually access it, but the MSS cannot write
- * an image there. Instantiating a coreQSPI in the fabric & connecting
- * it to the flash instead should work though. Pre-production or later
- * silicon does not have this issue.
- */
- status = "disabled";
-
- sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <20000000>;
- spi-rx-bus-width = <1>;
- reg = <0>;
- };
-};
-
-&usb {
- status = "okay";
- dr_mode = "host";
};
diff --git a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi
index 77ded53..94a4b71ac 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi
@@ -272,6 +272,7 @@ cpu0: cpu@0 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache0>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu0_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -299,6 +300,7 @@ cpu1: cpu@1 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache0>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu1_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -326,6 +328,7 @@ cpu2: cpu@2 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache0>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu2_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -353,6 +356,7 @@ cpu3: cpu@3 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache0>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu3_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -380,6 +384,7 @@ cpu4: cpu@4 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache1>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu4_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -407,6 +412,7 @@ cpu5: cpu@5 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache1>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu5_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -434,6 +440,7 @@ cpu6: cpu@6 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache1>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu6_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -461,6 +468,7 @@ cpu7: cpu@7 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache1>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu7_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -488,6 +496,7 @@ cpu8: cpu@8 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache4>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu8_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -515,6 +524,7 @@ cpu9: cpu@9 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache4>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu9_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -542,6 +552,7 @@ cpu10: cpu@10 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache4>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu10_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -569,6 +580,7 @@ cpu11: cpu@11 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache4>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu11_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -596,6 +608,7 @@ cpu12: cpu@12 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache5>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu12_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -623,6 +636,7 @@ cpu13: cpu@13 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache5>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu13_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -650,6 +664,7 @@ cpu14: cpu@14 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache5>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu14_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -677,6 +692,7 @@ cpu15: cpu@15 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache5>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu15_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -704,6 +720,7 @@ cpu16: cpu@16 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache2>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu16_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -731,6 +748,7 @@ cpu17: cpu@17 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache2>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu17_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -758,6 +776,7 @@ cpu18: cpu@18 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache2>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu18_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -785,6 +804,7 @@ cpu19: cpu@19 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache2>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu19_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -812,6 +832,7 @@ cpu20: cpu@20 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache3>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu20_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -839,6 +860,7 @@ cpu21: cpu@21 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache3>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu21_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -866,6 +888,7 @@ cpu22: cpu@22 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache3>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu22_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -893,6 +916,7 @@ cpu23: cpu@23 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache3>;
mmu-type = "riscv,sv39";
+ numa-node-id = <0>;
cpu23_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -920,6 +944,7 @@ cpu24: cpu@24 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache6>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu24_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -947,6 +972,7 @@ cpu25: cpu@25 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache6>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu25_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -974,6 +1000,7 @@ cpu26: cpu@26 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache6>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu26_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1001,6 +1028,7 @@ cpu27: cpu@27 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache6>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu27_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1028,6 +1056,7 @@ cpu28: cpu@28 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache7>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu28_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1055,6 +1084,7 @@ cpu29: cpu@29 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache7>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu29_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1082,6 +1112,7 @@ cpu30: cpu@30 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache7>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu30_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1109,6 +1140,7 @@ cpu31: cpu@31 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache7>;
mmu-type = "riscv,sv39";
+ numa-node-id = <1>;
cpu31_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1136,6 +1168,7 @@ cpu32: cpu@32 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache8>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu32_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1163,6 +1196,7 @@ cpu33: cpu@33 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache8>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu33_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1190,6 +1224,7 @@ cpu34: cpu@34 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache8>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu34_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1217,6 +1252,7 @@ cpu35: cpu@35 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache8>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu35_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1244,6 +1280,7 @@ cpu36: cpu@36 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache9>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu36_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1271,6 +1308,7 @@ cpu37: cpu@37 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache9>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu37_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1298,6 +1336,7 @@ cpu38: cpu@38 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache9>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu38_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1325,6 +1364,7 @@ cpu39: cpu@39 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache9>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu39_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1352,6 +1392,7 @@ cpu40: cpu@40 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache12>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu40_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1379,6 +1420,7 @@ cpu41: cpu@41 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache12>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu41_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1406,6 +1448,7 @@ cpu42: cpu@42 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache12>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu42_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1433,6 +1476,7 @@ cpu43: cpu@43 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache12>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu43_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1460,6 +1504,7 @@ cpu44: cpu@44 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache13>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu44_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1487,6 +1532,7 @@ cpu45: cpu@45 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache13>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu45_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1514,6 +1560,7 @@ cpu46: cpu@46 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache13>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu46_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1541,6 +1588,7 @@ cpu47: cpu@47 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache13>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu47_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1568,6 +1616,7 @@ cpu48: cpu@48 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache10>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu48_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1595,6 +1644,7 @@ cpu49: cpu@49 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache10>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu49_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1622,6 +1672,7 @@ cpu50: cpu@50 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache10>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu50_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1649,6 +1700,7 @@ cpu51: cpu@51 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache10>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu51_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1676,6 +1728,7 @@ cpu52: cpu@52 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache11>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu52_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1703,6 +1756,7 @@ cpu53: cpu@53 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache11>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu53_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1730,6 +1784,7 @@ cpu54: cpu@54 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache11>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu54_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1757,6 +1812,7 @@ cpu55: cpu@55 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache11>;
mmu-type = "riscv,sv39";
+ numa-node-id = <2>;
cpu55_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1784,6 +1840,7 @@ cpu56: cpu@56 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache14>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu56_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1811,6 +1868,7 @@ cpu57: cpu@57 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache14>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu57_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1838,6 +1896,7 @@ cpu58: cpu@58 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache14>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu58_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1865,6 +1924,7 @@ cpu59: cpu@59 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache14>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu59_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1892,6 +1952,7 @@ cpu60: cpu@60 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache15>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu60_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1919,6 +1980,7 @@ cpu61: cpu@61 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache15>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu61_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1946,6 +2008,7 @@ cpu62: cpu@62 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache15>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu62_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -1973,6 +2036,7 @@ cpu63: cpu@63 {
d-cache-sets = <512>;
next-level-cache = <&l2_cache15>;
mmu-type = "riscv,sv39";
+ numa-node-id = <3>;
cpu63_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 6430c6e..c5e4970 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -19,6 +19,26 @@ / {
#size-cells = <2>;
dma-noncoherent;
+ distance-map {
+ compatible = "numa-distance-map-v1";
+ distance-matrix = <0 0 10>,
+ <0 1 15>,
+ <0 2 25>,
+ <0 3 30>,
+ <1 0 15>,
+ <1 1 10>,
+ <1 2 30>,
+ <1 3 25>,
+ <2 0 25>,
+ <2 1 30>,
+ <2 2 10>,
+ <2 3 15>,
+ <3 0 30>,
+ <3 1 25>,
+ <3 2 15>,
+ <3 3 10>;
+ };
+
aliases {
serial0 = &uart0;
};
diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
index 92e13ce..1528326 100644
--- a/arch/riscv/boot/dts/spacemit/Makefile
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index fe22c74..6013be2 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -40,6 +40,10 @@ &emmc {
status = "okay";
};
+&pdma {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_2_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index 4483192..c615fca 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -20,6 +20,10 @@ chosen {
};
};
+&pdma {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_2_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
new file mode 100644
index 0000000..337240e
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
+ * Copyright (C) 2025 Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
+ */
+
+/dts-v1/;
+
+#include "k1.dtsi"
+#include "k1-pinctrl.dtsi"
+
+/ {
+ model = "OrangePi RV2";
+ compatible = "xunlong,orangepi-rv2", "spacemit,k1";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "sys-led";
+ gpios = <&gpio K1_GPIO(96) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_2_cfg>;
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index abde8bb..66b33a9 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -660,6 +660,17 @@ dma-bus {
dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
<0x1 0x00000000 0x1 0x80000000 0x3 0x00000000>;
+ pdma: dma-controller@d4000000 {
+ compatible = "spacemit,k1-pdma";
+ reg = <0x0 0xd4000000 0x0 0x4000>;
+ clocks = <&syscon_apmu CLK_DMA>;
+ resets = <&syscon_apmu RESET_DMA>;
+ interrupts = <72>;
+ dma-channels = <16>;
+ #dma-cells= <1>;
+ status = "disabled";
+ };
+
uart0: serial@d4017000 {
compatible = "spacemit,k1-uart",
"intel,xscale-uart";
@@ -667,6 +678,7 @@ uart0: serial@d4017000 {
clocks = <&syscon_apbc CLK_UART0>,
<&syscon_apbc CLK_UART0_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART0>;
interrupts = <42>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -680,6 +692,7 @@ uart2: serial@d4017100 {
clocks = <&syscon_apbc CLK_UART2>,
<&syscon_apbc CLK_UART2_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART2>;
interrupts = <44>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -693,6 +706,7 @@ uart3: serial@d4017200 {
clocks = <&syscon_apbc CLK_UART3>,
<&syscon_apbc CLK_UART3_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART3>;
interrupts = <45>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -706,6 +720,7 @@ uart4: serial@d4017300 {
clocks = <&syscon_apbc CLK_UART4>,
<&syscon_apbc CLK_UART4_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART4>;
interrupts = <46>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -719,6 +734,7 @@ uart5: serial@d4017400 {
clocks = <&syscon_apbc CLK_UART5>,
<&syscon_apbc CLK_UART5_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART5>;
interrupts = <47>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -732,6 +748,7 @@ uart6: serial@d4017500 {
clocks = <&syscon_apbc CLK_UART6>,
<&syscon_apbc CLK_UART6_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART6>;
interrupts = <48>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -745,6 +762,7 @@ uart7: serial@d4017600 {
clocks = <&syscon_apbc CLK_UART7>,
<&syscon_apbc CLK_UART7_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART7>;
interrupts = <49>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -758,6 +776,7 @@ uart8: serial@d4017700 {
clocks = <&syscon_apbc CLK_UART8>,
<&syscon_apbc CLK_UART8_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART8>;
interrupts = <50>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -771,22 +790,14 @@ uart9: serial@d4017800 {
clocks = <&syscon_apbc CLK_UART9>,
<&syscon_apbc CLK_UART9_BUS>;
clock-names = "core", "bus";
+ resets = <&syscon_apbc RESET_UART9>;
interrupts = <51>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
- sec_uart1: serial@f0612000 {
- compatible = "spacemit,k1-uart",
- "intel,xscale-uart";
- reg = <0x0 0xf0612000 0x0 0x100>;
- interrupts = <43>;
- clock-frequency = <14857000>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "reserved"; /* for TEE usage */
- };
+ /* sec_uart1: 0xf0612000, not available from Linux */
};
multimedia-bus {
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index b3bb12f..62b659f 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -10,6 +10,8 @@
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-deepcomputing-fml13v01.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 2eaf017..5dc15e4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -285,7 +285,6 @@ &mmc0 {
mmc-ddr-1_8v;
mmc-hs200-1_8v;
cap-mmc-hw-reset;
- post-power-on-delay-ms = <200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&vcc_3v3>;
@@ -299,12 +298,9 @@ &mmc1 {
assigned-clock-rates = <50000000>;
bus-width = <4>;
bootph-pre-ram;
- no-sdio;
- no-mmc;
cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
disable-wp;
cap-sd-highspeed;
- post-power-on-delay-ms = <200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
status = "okay";
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts
new file mode 100644
index 0000000..e568537
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@freeshell.de>
+ */
+
+/dts-v1/;
+#include "jh7110-milkv-marscm.dtsi"
+
+/ {
+ model = "Milk-V Mars CM";
+ compatible = "milkv,marscm-emmc", "starfive,jh7110";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts
new file mode 100644
index 0000000..6c40d0e
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@freeshell.de>
+ */
+
+/dts-v1/;
+#include "jh7110-milkv-marscm.dtsi"
+
+/ {
+ model = "Milk-V Mars CM Lite";
+ compatible = "milkv,marscm-lite", "starfive,jh7110";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&mmc0_pins {
+ pwren-pins {
+ pinmux = <GPIOMUX(22, GPOUT_HIGH,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ };
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
new file mode 100644
index 0000000..25b70af
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@freeshell.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "jh7110-common.dtsi"
+
+/ {
+ aliases {
+ i2c1 = &i2c1;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ serial3 = &uart3;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&sysgpio 33 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gmac0 {
+ assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+ assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+ starfive,tx-use-rgmii-clk;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c6 {
+ status = "disabled";
+};
+
+&mmc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ status = "okay";
+
+ ap6256: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&sysgpio>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-0 = <&wifi_host_wake_irq>;
+ pinctrl-names = "default";
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&phy0 {
+ rx-internal-delay-ps = <1500>;
+ tx-internal-delay-ps = <1500>;
+ motorcomm,rx-clk-drv-microamp = <3970>;
+ motorcomm,rx-data-drv-microamp = <2910>;
+ motorcomm,tx-clk-10-inverted;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,tx-clk-1000-inverted;
+ motorcomm,tx-clk-adj-enabled;
+};
+
+&pwm {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&sysgpio {
+ uart1_pins: uart1-0 {
+ tx-pins {
+ pinmux = <GPIOMUX(16, GPOUT_SYS_UART1_TX,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ rx-pins {
+ pinmux = <GPIOMUX(17, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART1_RX)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+
+ cts-pins {
+ pinmux = <GPIOMUX(3, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART1_CTS)>;
+ bias-disable;
+ input-enable;
+ input-schmitt-enable;
+ };
+
+ rts-pins {
+ pinmux = <GPIOMUX(2, GPOUT_SYS_UART1_RTS,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ };
+
+ usb0_pins: usb0-0 {
+ vbus-pins {
+ pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ wifi_host_wake_irq: wifi-host-wake-irq-0 {
+ wake-pins {
+ pinmux = <GPIOMUX(34, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ input-enable;
+ };
+ };
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 0ba74ef..6e56e9d2 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -35,6 +35,7 @@ S7_0: cpu@0 {
cpu0_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
+ bootph-pre-ram;
interrupt-controller;
#interrupt-cells = <1>;
};
@@ -68,6 +69,7 @@ U74_1: cpu@1 {
cpu1_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
+ bootph-pre-ram;
interrupt-controller;
#interrupt-cells = <1>;
};
@@ -101,6 +103,7 @@ U74_2: cpu@2 {
cpu2_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
+ bootph-pre-ram;
interrupt-controller;
#interrupt-cells = <1>;
};
@@ -134,6 +137,7 @@ U74_3: cpu@3 {
cpu3_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
+ bootph-pre-ram;
interrupt-controller;
#interrupt-cells = <1>;
};
@@ -167,6 +171,7 @@ U74_4: cpu@4 {
cpu4_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
+ bootph-pre-ram;
interrupt-controller;
#interrupt-cells = <1>;
};
@@ -273,12 +278,14 @@ gmac0_rmii_refin: gmac0-rmii-refin-clock {
gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
compatible = "fixed-clock";
+ bootph-pre-ram;
clock-output-names = "gmac1_rgmii_rxin";
#clock-cells = <0>;
};
gmac1_rmii_refin: gmac1-rmii-refin-clock {
compatible = "fixed-clock";
+ bootph-pre-ram;
clock-output-names = "gmac1_rmii_refin";
#clock-cells = <0>;
};
@@ -321,6 +328,7 @@ mclk_ext: mclk-ext-clock {
osc: oscillator {
compatible = "fixed-clock";
+ bootph-pre-ram;
clock-output-names = "osc";
#clock-cells = <0>;
};
@@ -354,6 +362,7 @@ soc {
clint: timer@2000000 {
compatible = "starfive,jh7110-clint", "sifive,clint0";
reg = <0x0 0x2000000 0x0 0x10000>;
+ bootph-pre-ram;
interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
<&cpu1_intc 3>, <&cpu1_intc 7>,
<&cpu2_intc 3>, <&cpu2_intc 7>,
@@ -880,6 +889,7 @@ qspi: spi@13010000 {
syscrg: clock-controller@13020000 {
compatible = "starfive,jh7110-syscrg";
reg = <0x0 0x13020000 0x0 0x10000>;
+ bootph-pre-ram;
clocks = <&osc>, <&gmac1_rmii_refin>,
<&gmac1_rgmii_rxin>,
<&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
@@ -904,6 +914,7 @@ sys_syscon: syscon@13030000 {
pllclk: clock-controller {
compatible = "starfive,jh7110-pll";
+ bootph-pre-ram;
clocks = <&osc>;
#clock-cells = <1>;
};
@@ -931,6 +942,19 @@ watchdog@13070000 {
<&syscrg JH7110_SYSRST_WDT_CORE>;
};
+ memory-controller@15700000 {
+ compatible = "starfive,jh7110-dmc";
+ reg = <0x0 0x15700000 0x0 0x10000>,
+ <0x0 0x13000000 0x0 0x10000>;
+ bootph-pre-ram;
+ clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+ clock-names = "pll";
+ resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+ <&syscrg JH7110_SYSRST_DDR_OSC>,
+ <&syscrg JH7110_SYSRST_DDR_APB>;
+ reset-names = "axi", "osc", "apb";
+ };
+
crypto: crypto@16000000 {
compatible = "starfive,jh7110-crypto";
reg = <0x0 0x16000000 0x0 0x4000>;
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 03f1d73..e680d1a 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -225,6 +225,13 @@ aonsys_clk: clock-73728000 {
#clock-cells = <0>;
};
+ gpu_mem_clk: mem-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "gpu_mem_clk";
+ #clock-cells = <0>;
+ };
+
stmmac_axi_config: stmmac-axi-config {
snps,wr_osr_lmt = <15>;
snps,rd_osr_lmt = <15>;
@@ -502,6 +509,20 @@ clk: clock-controller@ffef010000 {
#clock-cells = <1>;
};
+ gpu: gpu@ffef400000 {
+ compatible = "thead,th1520-gpu", "img,img-bxm-4-64",
+ "img,img-rogue";
+ reg = <0xff 0xef400000 0x0 0x100000>;
+ interrupt-parent = <&plic>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_vo CLK_GPU_CORE>,
+ <&gpu_mem_clk>,
+ <&clk_vo CLK_GPU_CFG_ACLK>;
+ clock-names = "core", "mem", "sys";
+ power-domains = <&aon TH1520_GPU_PD>;
+ resets = <&rst TH1520_RESET_ID_GPU>;
+ };
+
rst: reset-controller@ffef528000 {
compatible = "thead,th1520-reset";
reg = <0xff 0xef528000 0x0 0x4f>;
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 7b5eed1..b9ef2da 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -135,6 +135,7 @@
CONFIG_E1000E=y
CONFIG_R8169=y
CONFIG_STMMAC_ETH=m
+CONFIG_DWMAC_THEAD=m
CONFIG_MICREL_PHY=y
CONFIG_MICROSEMI_PHY=y
CONFIG_MOTORCOMM_PHY=y
@@ -152,7 +153,6 @@
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_MV64XXX=m
CONFIG_SPI=y
CONFIG_SPI_CADENCE_QUADSPI=m
@@ -160,11 +160,11 @@
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_SUN6I=y
# CONFIG_PTP_1588_CLOCK is not set
+CONFIG_PINCTRL_TH1520=y
CONFIG_PINCTRL_SOPHGO_CV1800B=y
CONFIG_PINCTRL_SOPHGO_CV1812H=y
CONFIG_PINCTRL_SOPHGO_SG2000=y
CONFIG_PINCTRL_SOPHGO_SG2002=y
-CONFIG_PINCTRL_TH1520=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SPACEMIT_K1=y
@@ -241,7 +241,7 @@
CONFIG_DMADEVICES=y
CONFIG_DMA_SUN6I=m
CONFIG_DW_AXI_DMAC=y
-CONFIG_DWMAC_THEAD=m
+CONFIG_MMP_PDMA=m
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
diff --git a/drivers/acpi/acpi_dbg.c b/drivers/acpi/acpi_dbg.c
index d50261d..515b20d 100644
--- a/drivers/acpi/acpi_dbg.c
+++ b/drivers/acpi/acpi_dbg.c
@@ -569,11 +569,11 @@ static int acpi_aml_release(struct inode *inode, struct file *file)
return 0;
}
-static int acpi_aml_read_user(char __user *buf, int len)
+static ssize_t acpi_aml_read_user(char __user *buf, size_t len)
{
- int ret;
struct circ_buf *crc = &acpi_aml_io.out_crc;
- int n;
+ ssize_t ret;
+ size_t n;
char *p;
ret = acpi_aml_lock_read(crc, ACPI_AML_OUT_USER);
@@ -582,7 +582,7 @@ static int acpi_aml_read_user(char __user *buf, int len)
/* sync head before removing logs */
smp_rmb();
p = &crc->buf[crc->tail];
- n = min(len, circ_count_to_end(crc));
+ n = min_t(size_t, len, circ_count_to_end(crc));
if (copy_to_user(buf, p, n)) {
ret = -EFAULT;
goto out;
@@ -599,8 +599,8 @@ static int acpi_aml_read_user(char __user *buf, int len)
static ssize_t acpi_aml_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- int ret = 0;
- int size = 0;
+ ssize_t ret = 0;
+ ssize_t size = 0;
if (!count)
return 0;
@@ -639,11 +639,11 @@ static ssize_t acpi_aml_read(struct file *file, char __user *buf,
return size > 0 ? size : ret;
}
-static int acpi_aml_write_user(const char __user *buf, int len)
+static ssize_t acpi_aml_write_user(const char __user *buf, size_t len)
{
- int ret;
struct circ_buf *crc = &acpi_aml_io.in_crc;
- int n;
+ ssize_t ret;
+ size_t n;
char *p;
ret = acpi_aml_lock_write(crc, ACPI_AML_IN_USER);
@@ -652,7 +652,7 @@ static int acpi_aml_write_user(const char __user *buf, int len)
/* sync tail before inserting cmds */
smp_mb();
p = &crc->buf[crc->head];
- n = min(len, circ_space_to_end(crc));
+ n = min_t(size_t, len, circ_space_to_end(crc));
if (copy_from_user(p, buf, n)) {
ret = -EFAULT;
goto out;
@@ -663,14 +663,14 @@ static int acpi_aml_write_user(const char __user *buf, int len)
ret = n;
out:
acpi_aml_unlock_fifo(ACPI_AML_IN_USER, ret >= 0);
- return n;
+ return ret;
}
static ssize_t acpi_aml_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- int ret = 0;
- int size = 0;
+ ssize_t ret = 0;
+ ssize_t size = 0;
if (!count)
return 0;
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 2a99f5e..7ec1dc0 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -815,7 +815,7 @@ bool acpi_processor_claim_cst_control(void)
cst_control_claimed = true;
return true;
}
-EXPORT_SYMBOL_GPL(acpi_processor_claim_cst_control);
+EXPORT_SYMBOL_NS_GPL(acpi_processor_claim_cst_control, "ACPI_PROCESSOR_IDLE");
/**
* acpi_processor_evaluate_cst - Evaluate the processor _CST control method.
@@ -994,5 +994,5 @@ int acpi_processor_evaluate_cst(acpi_handle handle, u32 cpu,
return ret;
}
-EXPORT_SYMBOL_GPL(acpi_processor_evaluate_cst);
+EXPORT_SYMBOL_NS_GPL(acpi_processor_evaluate_cst, "ACPI_PROCESSOR_IDLE");
#endif /* CONFIG_ACPI_PROCESSOR_CSTATE */
diff --git a/drivers/acpi/acpi_tad.c b/drivers/acpi/acpi_tad.c
index 91d7d90..33418dd 100644
--- a/drivers/acpi/acpi_tad.c
+++ b/drivers/acpi/acpi_tad.c
@@ -565,6 +565,9 @@ static void acpi_tad_remove(struct platform_device *pdev)
pm_runtime_get_sync(dev);
+ if (dd->capabilities & ACPI_TAD_RT)
+ sysfs_remove_group(&dev->kobj, &acpi_tad_time_attr_group);
+
if (dd->capabilities & ACPI_TAD_DC_WAKE)
sysfs_remove_group(&dev->kobj, &acpi_tad_dc_attr_group);
diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h
index fe6d38b..91241bd 100644
--- a/drivers/acpi/acpica/acdebug.h
+++ b/drivers/acpi/acpica/acdebug.h
@@ -37,7 +37,7 @@ struct acpi_db_argument_info {
struct acpi_db_execute_walk {
u32 count;
u32 max_count;
- char name_seg[ACPI_NAMESEG_SIZE + 1] ACPI_NONSTRING;
+ char name_seg[ACPI_NAMESEG_SIZE + 1];
};
#define PARAM_LIST(pl) pl
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 0c41f00..f986400 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -1141,7 +1141,7 @@ struct acpi_port_info {
#define ACPI_RESOURCE_NAME_PIN_GROUP_FUNCTION 0x91
#define ACPI_RESOURCE_NAME_PIN_GROUP_CONFIG 0x92
#define ACPI_RESOURCE_NAME_CLOCK_INPUT 0x93
-#define ACPI_RESOURCE_NAME_LARGE_MAX 0x94
+#define ACPI_RESOURCE_NAME_LARGE_MAX 0x93
/*****************************************************************************
*
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index 76c5ed0..da2c4588 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -450,7 +450,8 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = {
{{"_DSM",
METHOD_4ARGS(ACPI_TYPE_BUFFER, ACPI_TYPE_INTEGER, ACPI_TYPE_INTEGER,
- ACPI_TYPE_ANY) | ARG_COUNT_IS_MINIMUM,
+ ACPI_TYPE_ANY | ACPI_TYPE_PACKAGE) |
+ ARG_COUNT_IS_MINIMUM,
METHOD_RETURNS(ACPI_RTYPE_ALL)}}, /* Must return a value, but it can be of any type */
{{"_DSS", METHOD_1ARGS(ACPI_TYPE_INTEGER),
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index fef6fb2..45ec32e 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -462,7 +462,6 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
struct acpi_walk_state *next_walk_state = NULL;
union acpi_operand_object *obj_desc;
struct acpi_evaluate_info *info;
- u32 i;
ACPI_FUNCTION_TRACE_PTR(ds_call_control_method, this_walk_state);
@@ -484,10 +483,17 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
}
if (this_walk_state->num_operands < obj_desc->method.param_count) {
- ACPI_ERROR((AE_INFO, "Missing argument for method [%4.4s]",
+ ACPI_ERROR((AE_INFO, "Missing argument(s) for method [%4.4s]",
acpi_ut_get_node_name(method_node)));
- return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
+ return_ACPI_STATUS(AE_AML_TOO_FEW_ARGUMENTS);
+ }
+
+ else if (this_walk_state->num_operands > obj_desc->method.param_count) {
+ ACPI_ERROR((AE_INFO, "Too many arguments for method [%4.4s]",
+ acpi_ut_get_node_name(method_node)));
+
+ return_ACPI_STATUS(AE_AML_TOO_MANY_ARGUMENTS);
}
/* Init for new method, possibly wait on method mutex */
@@ -546,14 +552,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread,
* Delete the operands on the previous walkstate operand stack
* (they were copied to new objects)
*/
- for (i = 0; i < obj_desc->method.param_count; i++) {
- acpi_ut_remove_reference(this_walk_state->operands[i]);
- this_walk_state->operands[i] = NULL;
- }
-
- /* Clear the operand stack */
-
- this_walk_state->num_operands = 0;
+ acpi_ds_clear_operands(this_walk_state);
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"**** Begin nested execution of [%4.4s] **** WalkState=%p\n",
diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c
index fa3e0d0..df2a4ab 100644
--- a/drivers/acpi/acpica/evglock.c
+++ b/drivers/acpi/acpica/evglock.c
@@ -42,6 +42,10 @@ acpi_status acpi_ev_init_global_lock_handler(void)
return_ACPI_STATUS(AE_OK);
}
+ if (!acpi_gbl_use_global_lock) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* Attempt installation of the global lock handler */
status = acpi_install_fixed_event_handler(ACPI_EVENT_GLOBAL,
diff --git a/drivers/acpi/acpica/psopinfo.c b/drivers/acpi/acpica/psopinfo.c
index 1c8044f..532ea30 100644
--- a/drivers/acpi/acpica/psopinfo.c
+++ b/drivers/acpi/acpica/psopinfo.c
@@ -34,7 +34,7 @@ static const u8 acpi_gbl_argument_count[] =
const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode)
{
-#ifdef ACPI_DEBUG_OUTPUT
+#if defined ACPI_ASL_COMPILER && defined ACPI_DEBUG_OUTPUT
const char *opcode_name = "Unknown AML opcode";
#endif
@@ -102,11 +102,11 @@ const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode)
default:
break;
}
-#endif
/* Unknown AML opcode */
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%4.4X]\n", opcode_name, opcode));
+#endif
return (&acpi_gbl_aml_op_info[_UNK]);
}
diff --git a/drivers/acpi/acpica/tbprint.c b/drivers/acpi/acpica/tbprint.c
index fd64460..049f6c2 100644
--- a/drivers/acpi/acpica/tbprint.c
+++ b/drivers/acpi/acpica/tbprint.c
@@ -121,6 +121,14 @@ acpi_tb_print_table_header(acpi_physical_address address,
ACPI_CAST_PTR(struct acpi_table_rsdp,
header)->revision,
local_header.oem_id));
+ } else if (acpi_gbl_CDAT && !acpi_ut_valid_nameseg(header->signature)) {
+
+ /* CDAT does not use the common ACPI table header */
+
+ ACPI_INFO(("%-4.4s 0x%8.8X%8.8X %06X",
+ ACPI_SIG_CDAT, ACPI_FORMAT_UINT64(address),
+ ACPI_CAST_PTR(struct acpi_table_cdat,
+ header)->length));
} else {
/* Standard ACPI table with full common header */
diff --git a/drivers/acpi/apei/einj-core.c b/drivers/acpi/apei/einj-core.c
index 2561b04..3c87953 100644
--- a/drivers/acpi/apei/einj-core.c
+++ b/drivers/acpi/apei/einj-core.c
@@ -656,6 +656,43 @@ static int __einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2,
return rc;
}
+/* Allow almost all types of address except MMIO. */
+static bool is_allowed_range(u64 base_addr, u64 size)
+{
+ int i;
+ /*
+ * MMIO region is usually claimed with IORESOURCE_MEM + IORES_DESC_NONE.
+ * However, IORES_DESC_NONE is treated like a wildcard when we check if
+ * region intersects with known resource. So do an allow list check for
+ * IORES_DESCs that definitely or most likely not MMIO.
+ */
+ int non_mmio_desc[] = {
+ IORES_DESC_CRASH_KERNEL,
+ IORES_DESC_ACPI_TABLES,
+ IORES_DESC_ACPI_NV_STORAGE,
+ IORES_DESC_PERSISTENT_MEMORY,
+ IORES_DESC_PERSISTENT_MEMORY_LEGACY,
+ /* Treat IORES_DESC_DEVICE_PRIVATE_MEMORY as MMIO. */
+ IORES_DESC_RESERVED,
+ IORES_DESC_SOFT_RESERVED,
+ };
+
+ if (region_intersects(base_addr, size, IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE)
+ == REGION_INTERSECTS)
+ return true;
+
+ for (i = 0; i < ARRAY_SIZE(non_mmio_desc); ++i) {
+ if (region_intersects(base_addr, size, IORESOURCE_MEM, non_mmio_desc[i])
+ == REGION_INTERSECTS)
+ return true;
+ }
+
+ if (arch_is_platform_page(base_addr))
+ return true;
+
+ return false;
+}
+
/* Inject the specified hardware error */
int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, u64 param3,
u64 param4)
@@ -702,19 +739,15 @@ int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, u64 param3,
* Disallow crazy address masks that give BIOS leeway to pick
* injection address almost anywhere. Insist on page or
* better granularity and that target address is normal RAM or
- * NVDIMM.
+ * as long as is not MMIO.
*/
base_addr = param1 & param2;
size = ~param2 + 1;
- if (((param2 & PAGE_MASK) != PAGE_MASK) ||
- ((region_intersects(base_addr, size, IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE)
- != REGION_INTERSECTS) &&
- (region_intersects(base_addr, size, IORESOURCE_MEM, IORES_DESC_PERSISTENT_MEMORY)
- != REGION_INTERSECTS) &&
- (region_intersects(base_addr, size, IORESOURCE_MEM, IORES_DESC_SOFT_RESERVED)
- != REGION_INTERSECTS) &&
- !arch_is_platform_page(base_addr)))
+ if ((param2 & PAGE_MASK) != PAGE_MASK)
+ return -EINVAL;
+
+ if (!is_allowed_range(base_addr, size))
return -EINVAL;
if (is_zero_pfn(base_addr >> PAGE_SHIFT))
diff --git a/drivers/acpi/apei/erst-dbg.c b/drivers/acpi/apei/erst-dbg.c
index 2460763..ff0e8bf 100644
--- a/drivers/acpi/apei/erst-dbg.c
+++ b/drivers/acpi/apei/erst-dbg.c
@@ -60,9 +60,8 @@ static long erst_dbg_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
switch (cmd) {
case APEI_ERST_CLEAR_RECORD:
- rc = copy_from_user(&record_id, (void __user *)arg,
- sizeof(record_id));
- if (rc)
+ if (copy_from_user(&record_id, (void __user *)arg,
+ sizeof(record_id)))
return -EFAULT;
return erst_clear(record_id);
case APEI_ERST_GET_RECORD_COUNT:
@@ -175,8 +174,7 @@ static ssize_t erst_dbg_write(struct file *filp, const char __user *ubuf,
erst_dbg_buf = p;
erst_dbg_buf_len = usize;
}
- rc = copy_from_user(erst_dbg_buf, ubuf, usize);
- if (rc) {
+ if (copy_from_user(erst_dbg_buf, ubuf, usize)) {
rc = -EFAULT;
goto out;
}
diff --git a/drivers/acpi/device_sysfs.c b/drivers/acpi/device_sysfs.c
index 3961fc4..cd199fb 100644
--- a/drivers/acpi/device_sysfs.c
+++ b/drivers/acpi/device_sysfs.c
@@ -464,7 +464,7 @@ static ssize_t description_show(struct device *dev,
buf[result++] = '\n';
- kfree(str_obj);
+ ACPI_FREE(str_obj);
return result;
}
diff --git a/drivers/acpi/fan_core.c b/drivers/acpi/fan_core.c
index 09550208..04ff608 100644
--- a/drivers/acpi/fan_core.c
+++ b/drivers/acpi/fan_core.c
@@ -203,18 +203,6 @@ static const struct thermal_cooling_device_ops fan_cooling_ops = {
* --------------------------------------------------------------------------
*/
-static bool acpi_fan_has_fst(struct acpi_device *device)
-{
- return acpi_has_method(device->handle, "_FST");
-}
-
-static bool acpi_fan_is_acpi4(struct acpi_device *device)
-{
- return acpi_has_method(device->handle, "_FIF") &&
- acpi_has_method(device->handle, "_FPS") &&
- acpi_has_method(device->handle, "_FSL");
-}
-
static int acpi_fan_get_fif(struct acpi_device *device)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -331,9 +319,11 @@ static int acpi_fan_probe(struct platform_device *pdev)
device->driver_data = fan;
platform_set_drvdata(pdev, fan);
- if (acpi_fan_has_fst(device)) {
+ if (acpi_has_method(device->handle, "_FST")) {
fan->has_fst = true;
- fan->acpi4 = acpi_fan_is_acpi4(device);
+ fan->acpi4 = acpi_has_method(device->handle, "_FIF") &&
+ acpi_has_method(device->handle, "_FPS") &&
+ acpi_has_method(device->handle, "_FSL");
}
if (fan->acpi4) {
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index e278186..6335497 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -140,6 +140,7 @@ int __acpi_device_uevent_modalias(const struct acpi_device *adev,
/* --------------------------------------------------------------------------
Power Resource
-------------------------------------------------------------------------- */
+void acpi_power_resources_init(void);
void acpi_power_resources_list_free(struct list_head *list);
int acpi_extract_power_resources(union acpi_object *package, unsigned int start,
struct list_head *list);
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 630fe0a..ad81aa0 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -22,6 +22,7 @@
#include <linux/acpi.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/string_choices.h>
struct acpi_prt_entry {
struct acpi_pci_id id;
@@ -468,7 +469,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
dev_dbg(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n",
pin_name(pin), link_desc, gsi,
(triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
- (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
+ str_low_high(polarity == ACPI_ACTIVE_LOW), dev->irq);
kfree(entry);
return 0;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index b7243d7..361a772 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -23,6 +23,7 @@
#define pr_fmt(fmt) "ACPI: PM: " fmt
+#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -63,6 +64,9 @@ struct acpi_power_resource_entry {
struct acpi_power_resource *resource;
};
+static bool hp_eb_gp12pxp_quirk;
+static bool unused_power_resources_quirk;
+
static LIST_HEAD(acpi_power_resource_list);
static DEFINE_MUTEX(power_resource_list_lock);
@@ -992,6 +996,38 @@ struct acpi_device *acpi_add_power_resource(acpi_handle handle)
}
#ifdef CONFIG_ACPI_SLEEP
+static bool resource_is_gp12pxp(acpi_handle handle)
+{
+ const char *path;
+ bool ret;
+
+ path = acpi_handle_path(handle);
+ ret = path && strcmp(path, "\\_SB_.PCI0.GP12.PXP_") == 0;
+ kfree(path);
+
+ return ret;
+}
+
+static void acpi_resume_on_eb_gp12pxp(struct acpi_power_resource *resource)
+{
+ acpi_handle_notice(resource->device.handle,
+ "HP EB quirk - turning OFF then ON\n");
+
+ __acpi_power_off(resource);
+ __acpi_power_on(resource);
+
+ /*
+ * Use the same delay as DSDT uses in modem _RST method.
+ *
+ * Otherwise we get "Unable to change power state from unknown to D0,
+ * device inaccessible" error for the modem PCI device after thaw.
+ *
+ * This power resource is normally being enabled only during thaw (once)
+ * so this wait is not a performance issue.
+ */
+ msleep(200);
+}
+
void acpi_resume_power_resources(void)
{
struct acpi_power_resource *resource;
@@ -1013,8 +1049,14 @@ void acpi_resume_power_resources(void)
if (state == ACPI_POWER_RESOURCE_STATE_OFF
&& resource->ref_count) {
- acpi_handle_debug(resource->device.handle, "Turning ON\n");
- __acpi_power_on(resource);
+ if (hp_eb_gp12pxp_quirk &&
+ resource_is_gp12pxp(resource->device.handle)) {
+ acpi_resume_on_eb_gp12pxp(resource);
+ } else {
+ acpi_handle_debug(resource->device.handle,
+ "Turning ON\n");
+ __acpi_power_on(resource);
+ }
}
mutex_unlock(&resource->resource_lock);
@@ -1024,6 +1066,41 @@ void acpi_resume_power_resources(void)
}
#endif
+static const struct dmi_system_id dmi_hp_elitebook_gp12pxp_quirk[] = {
+/*
+ * This laptop (and possibly similar models too) has power resource called
+ * "GP12.PXP_" for its WWAN modem.
+ *
+ * For this power resource to turn ON power for the modem it needs certain
+ * internal flag called "ONEN" to be set.
+ * This flag only gets set from this power resource "_OFF" method, while the
+ * actual modem power gets turned off during suspend by "GP12.PTS" method
+ * called from the global "_PTS" (Prepare To Sleep) method.
+ * On the other hand, this power resource "_OFF" method implementation just
+ * sets the aforementioned flag without actually doing anything else (it
+ * doesn't contain any code to actually turn off power).
+ *
+ * The above means that when upon hibernation finish we try to set this
+ * power resource back ON since its "_STA" method returns 0 (while the resource
+ * is still considered in use) its "_ON" method won't do anything since
+ * that "ONEN" flag is not set.
+ * Overall, this means the modem is dead until laptop is rebooted since its
+ * power has been cut by "_PTS" and its PCI configuration was lost and not able
+ * to be restored.
+ *
+ * The easiest way to workaround the issue is to call this power resource
+ * "_OFF" method before calling the "_ON" method to make sure the "ONEN"
+ * flag gets properly set.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 855 G7 Notebook PC"),
+ },
+ },
+ {}
+};
+
static const struct dmi_system_id dmi_leave_unused_power_resources_on[] = {
{
/*
@@ -1046,7 +1123,7 @@ void acpi_turn_off_unused_power_resources(void)
{
struct acpi_power_resource *resource;
- if (dmi_check_system(dmi_leave_unused_power_resources_on))
+ if (unused_power_resources_quirk)
return;
mutex_lock(&power_resource_list_lock);
@@ -1065,3 +1142,10 @@ void acpi_turn_off_unused_power_resources(void)
mutex_unlock(&power_resource_list_lock);
}
+
+void __init acpi_power_resources_init(void)
+{
+ hp_eb_gp12pxp_quirk = dmi_check_system(dmi_hp_elitebook_gp12pxp_quirk);
+ unused_power_resources_quirk =
+ dmi_check_system(dmi_leave_unused_power_resources_on);
+}
diff --git a/drivers/acpi/prmt.c b/drivers/acpi/prmt.c
index be033bb..6792d43 100644
--- a/drivers/acpi/prmt.c
+++ b/drivers/acpi/prmt.c
@@ -150,15 +150,28 @@ acpi_parse_prmt(union acpi_subtable_headers *header, const unsigned long end)
th = &tm->handlers[cur_handler];
guid_copy(&th->guid, (guid_t *)handler_info->handler_guid);
+
+ /*
+ * Print an error message if handler_address is NULL, the parse of VA also
+ * can be skipped.
+ */
+ if (unlikely(!handler_info->handler_address)) {
+ pr_info("Skipping handler with NULL address for GUID: %pUL",
+ (guid_t *)handler_info->handler_guid);
+ continue;
+ }
+
th->handler_addr =
(void *)efi_pa_va_lookup(&th->guid, handler_info->handler_address);
/*
- * Print a warning message if handler_addr is zero which is not expected to
- * ever happen.
+ * Print a warning message and skip the parse of VA if handler_addr is zero
+ * which is not expected to ever happen.
*/
- if (unlikely(!th->handler_addr))
+ if (unlikely(!th->handler_addr)) {
pr_warn("Failed to find VA of handler for GUID: %pUL, PA: 0x%llx",
&th->guid, handler_info->handler_address);
+ continue;
+ }
th->static_data_buffer_addr =
efi_pa_va_lookup(&th->guid, handler_info->static_data_buffer_address);
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 65e779be..5d82443 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -166,8 +166,7 @@ static int __acpi_processor_start(struct acpi_device *device)
if (result && !IS_ENABLED(CONFIG_ACPI_CPU_FREQ_PSS))
dev_dbg(&device->dev, "CPPC data invalid or not present\n");
- if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver)
- acpi_processor_power_init(pr);
+ acpi_processor_power_init(pr);
acpi_pss_perf_init(pr);
@@ -263,6 +262,8 @@ static int __init acpi_processor_driver_init(void)
if (result < 0)
return result;
+ acpi_processor_register_idle_driver();
+
result = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
"acpi/cpu-drv:online",
acpi_soft_cpu_online, NULL);
@@ -301,6 +302,7 @@ static void __exit acpi_processor_driver_exit(void)
cpuhp_remove_state_nocalls(hp_online);
cpuhp_remove_state_nocalls(CPUHP_ACPI_CPUDRV_DEAD);
+ acpi_processor_unregister_idle_driver();
driver_unregister(&acpi_processor_driver);
}
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2c2dc55..22b051b 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -51,7 +51,7 @@ module_param(latency_factor, uint, 0644);
static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
-struct cpuidle_driver acpi_idle_driver = {
+static struct cpuidle_driver acpi_idle_driver = {
.name = "acpi_idle",
.owner = THIS_MODULE,
};
@@ -998,11 +998,6 @@ static int acpi_processor_evaluate_lpi(acpi_handle handle,
return ret;
}
-/*
- * flat_state_cnt - the number of composite LPI states after the process of flattening
- */
-static int flat_state_cnt;
-
/**
* combine_lpi_states - combine local and parent LPI states to form a composite LPI state
*
@@ -1045,9 +1040,10 @@ static void stash_composite_state(struct acpi_lpi_states_array *curr_level,
curr_level->composite_states[curr_level->composite_states_size++] = t;
}
-static int flatten_lpi_states(struct acpi_processor *pr,
- struct acpi_lpi_states_array *curr_level,
- struct acpi_lpi_states_array *prev_level)
+static unsigned int flatten_lpi_states(struct acpi_processor *pr,
+ unsigned int flat_state_cnt,
+ struct acpi_lpi_states_array *curr_level,
+ struct acpi_lpi_states_array *prev_level)
{
int i, j, state_count = curr_level->size;
struct acpi_lpi_state *p, *t = curr_level->entries;
@@ -1087,7 +1083,7 @@ static int flatten_lpi_states(struct acpi_processor *pr,
}
kfree(curr_level->entries);
- return 0;
+ return flat_state_cnt;
}
int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu)
@@ -1102,6 +1098,7 @@ static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
acpi_handle handle = pr->handle, pr_ahandle;
struct acpi_device *d = NULL;
struct acpi_lpi_states_array info[2], *tmp, *prev, *curr;
+ unsigned int state_count;
/* make sure our architecture has support */
ret = acpi_processor_ffh_lpi_probe(pr->id);
@@ -1114,14 +1111,13 @@ static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
if (!acpi_has_method(handle, "_LPI"))
return -EINVAL;
- flat_state_cnt = 0;
prev = &info[0];
curr = &info[1];
handle = pr->handle;
ret = acpi_processor_evaluate_lpi(handle, prev);
if (ret)
return ret;
- flatten_lpi_states(pr, prev, NULL);
+ state_count = flatten_lpi_states(pr, 0, prev, NULL);
status = acpi_get_parent(handle, &pr_ahandle);
while (ACPI_SUCCESS(status)) {
@@ -1143,18 +1139,19 @@ static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
break;
/* flatten all the LPI states in this level of hierarchy */
- flatten_lpi_states(pr, curr, prev);
+ state_count = flatten_lpi_states(pr, state_count, curr, prev);
tmp = prev, prev = curr, curr = tmp;
status = acpi_get_parent(handle, &pr_ahandle);
}
- pr->power.count = flat_state_cnt;
/* reset the index after flattening */
- for (i = 0; i < pr->power.count; i++)
+ for (i = 0; i < state_count; i++)
pr->power.lpi_states[i].index = i;
+ pr->power.count = state_count;
+
/* Tell driver that _LPI is supported. */
pr->flags.has_lpi = 1;
pr->flags.power = 1;
@@ -1360,74 +1357,102 @@ int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
return 0;
}
-static int acpi_processor_registered;
-
-int acpi_processor_power_init(struct acpi_processor *pr)
+void acpi_processor_register_idle_driver(void)
{
- int retval;
+ struct acpi_processor *pr;
+ int ret = -ENODEV;
+ int cpu;
+
+ /*
+ * Acpi idle driver is used by all possible CPUs.
+ * Install the idle handler by the processor power info of one in them.
+ * Note that we use previously set idle handler will be used on
+ * platforms that only support C1.
+ */
+ for_each_cpu(cpu, (struct cpumask *)cpu_possible_mask) {
+ pr = per_cpu(processors, cpu);
+ if (!pr)
+ continue;
+
+ ret = acpi_processor_get_power_info(pr);
+ if (!ret) {
+ pr->flags.power_setup_done = 1;
+ acpi_processor_setup_cpuidle_states(pr);
+ break;
+ }
+ }
+
+ if (ret) {
+ pr_debug("No ACPI power information from any CPUs.\n");
+ return;
+ }
+
+ ret = cpuidle_register_driver(&acpi_idle_driver);
+ if (ret) {
+ pr_debug("register %s failed.\n", acpi_idle_driver.name);
+ return;
+ }
+ pr_debug("%s registered with cpuidle.\n", acpi_idle_driver.name);
+}
+
+void acpi_processor_unregister_idle_driver(void)
+{
+ cpuidle_unregister_driver(&acpi_idle_driver);
+}
+
+void acpi_processor_power_init(struct acpi_processor *pr)
+{
struct cpuidle_device *dev;
+ /*
+ * The code below only works if the current cpuidle driver is the ACPI
+ * idle driver.
+ */
+ if (cpuidle_get_driver() != &acpi_idle_driver)
+ return;
+
if (disabled_by_idle_boot_param())
- return 0;
+ return;
acpi_processor_cstate_first_run_checks();
if (!acpi_processor_get_power_info(pr))
pr->flags.power_setup_done = 1;
+ if (!pr->flags.power)
+ return;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return;
+
+ per_cpu(acpi_cpuidle_device, pr->id) = dev;
+
+ acpi_processor_setup_cpuidle_dev(pr, dev);
+
/*
- * Install the idle handler if processor power management is supported.
- * Note that we use previously set idle handler will be used on
- * platforms that only support C1.
+ * Register a cpuidle device for this CPU. The cpuidle driver using
+ * this device is expected to be registered.
*/
- if (pr->flags.power) {
- /* Register acpi_idle_driver if not already registered */
- if (!acpi_processor_registered) {
- acpi_processor_setup_cpuidle_states(pr);
- retval = cpuidle_register_driver(&acpi_idle_driver);
- if (retval)
- return retval;
- pr_debug("%s registered with cpuidle\n",
- acpi_idle_driver.name);
- }
-
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
- per_cpu(acpi_cpuidle_device, pr->id) = dev;
-
- acpi_processor_setup_cpuidle_dev(pr, dev);
-
- /* Register per-cpu cpuidle_device. Cpuidle driver
- * must already be registered before registering device
- */
- retval = cpuidle_register_device(dev);
- if (retval) {
- if (acpi_processor_registered == 0)
- cpuidle_unregister_driver(&acpi_idle_driver);
- return retval;
- }
- acpi_processor_registered++;
+ if (cpuidle_register_device(dev)) {
+ per_cpu(acpi_cpuidle_device, pr->id) = NULL;
+ kfree(dev);
}
- return 0;
}
-int acpi_processor_power_exit(struct acpi_processor *pr)
+void acpi_processor_power_exit(struct acpi_processor *pr)
{
struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
if (disabled_by_idle_boot_param())
- return 0;
+ return;
if (pr->flags.power) {
cpuidle_unregister_device(dev);
- acpi_processor_registered--;
- if (acpi_processor_registered == 0)
- cpuidle_unregister_driver(&acpi_idle_driver);
-
kfree(dev);
}
pr->flags.power_setup_done = 0;
- return 0;
}
+
+MODULE_IMPORT_NS("ACPI_PROCESSOR_IDLE");
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 1219adb..c7b1dc5 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -62,19 +62,14 @@ static int phys_package_first_cpu(int cpu)
return 0;
}
-static int cpu_has_cpufreq(unsigned int cpu)
+static bool cpu_has_cpufreq(unsigned int cpu)
{
- struct cpufreq_policy *policy;
-
if (!acpi_processor_cpufreq_init)
return 0;
- policy = cpufreq_cpu_get(cpu);
- if (policy) {
- cpufreq_cpu_put(policy);
- return 1;
- }
- return 0;
+ struct cpufreq_policy *policy __free(put_cpufreq_policy) = cpufreq_cpu_get(cpu);
+
+ return policy != NULL;
}
static int cpufreq_get_max_state(unsigned int cpu)
@@ -93,12 +88,31 @@ static int cpufreq_get_cur_state(unsigned int cpu)
return reduction_step(cpu);
}
+static bool cpufreq_update_thermal_limit(unsigned int cpu, struct acpi_processor *pr)
+{
+ unsigned long max_freq;
+ int ret;
+
+ struct cpufreq_policy *policy __free(put_cpufreq_policy) = cpufreq_cpu_get(cpu);
+ if (!policy)
+ return false;
+
+ max_freq = (policy->cpuinfo.max_freq *
+ (100 - reduction_step(cpu) * cpufreq_thermal_reduction_pctg)) / 100;
+
+ ret = freq_qos_update_request(&pr->thermal_req, max_freq);
+ if (ret < 0) {
+ pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n",
+ pr->id, ret);
+ }
+
+ return true;
+}
+
static int cpufreq_set_cur_state(unsigned int cpu, int state)
{
- struct cpufreq_policy *policy;
struct acpi_processor *pr;
- unsigned long max_freq;
- int i, ret;
+ int i;
if (!cpu_has_cpufreq(cpu))
return 0;
@@ -120,20 +134,8 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state)
if (unlikely(!freq_qos_request_active(&pr->thermal_req)))
continue;
- policy = cpufreq_cpu_get(i);
- if (!policy)
+ if (!cpufreq_update_thermal_limit(i, pr))
return -EINVAL;
-
- max_freq = (policy->cpuinfo.max_freq *
- (100 - reduction_step(i) * cpufreq_thermal_reduction_pctg)) / 100;
-
- cpufreq_cpu_put(policy);
-
- ret = freq_qos_update_request(&pr->thermal_req, max_freq);
- if (ret < 0) {
- pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n",
- pr->id, ret);
- }
}
return 0;
}
diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
index 436019d..54baa23 100644
--- a/drivers/acpi/property.c
+++ b/drivers/acpi/property.c
@@ -83,6 +83,7 @@ static bool acpi_nondev_subnode_extract(union acpi_object *desc,
struct fwnode_handle *parent)
{
struct acpi_data_node *dn;
+ acpi_handle scope = NULL;
bool result;
if (acpi_graph_ignore_port(handle))
@@ -98,48 +99,70 @@ static bool acpi_nondev_subnode_extract(union acpi_object *desc,
INIT_LIST_HEAD(&dn->data.properties);
INIT_LIST_HEAD(&dn->data.subnodes);
- result = acpi_extract_properties(handle, desc, &dn->data);
+ /*
+ * The scope for the completion of relative pathname segments and
+ * subnode object lookup is the one of the namespace node (device)
+ * containing the object that has returned the package. That is, it's
+ * the scope of that object's parent device.
+ */
+ if (handle)
+ acpi_get_parent(handle, &scope);
- if (handle) {
- acpi_handle scope;
- acpi_status status;
-
- /*
- * The scope for the subnode object lookup is the one of the
- * namespace node (device) containing the object that has
- * returned the package. That is, it's the scope of that
- * object's parent.
- */
- status = acpi_get_parent(handle, &scope);
- if (ACPI_SUCCESS(status)
- && acpi_enumerate_nondev_subnodes(scope, desc, &dn->data,
- &dn->fwnode))
- result = true;
- } else if (acpi_enumerate_nondev_subnodes(NULL, desc, &dn->data,
- &dn->fwnode)) {
+ /*
+ * Extract properties from the _DSD-equivalent package pointed to by
+ * desc and use scope (if not NULL) for the completion of relative
+ * pathname segments.
+ *
+ * The extracted properties will be held in the new data node dn.
+ */
+ result = acpi_extract_properties(scope, desc, &dn->data);
+ /*
+ * Look for subnodes in the _DSD-equivalent package pointed to by desc
+ * and create child nodes of dn if there are any.
+ */
+ if (acpi_enumerate_nondev_subnodes(scope, desc, &dn->data, &dn->fwnode))
result = true;
+
+ if (!result) {
+ kfree(dn);
+ acpi_handle_debug(handle, "Invalid properties/subnodes data, skipping\n");
+ return false;
}
- if (result) {
- dn->handle = handle;
- dn->data.pointer = desc;
- list_add_tail(&dn->sibling, list);
- return true;
- }
+ /*
+ * This will be NULL if the desc package is embedded in an outer
+ * _DSD-equivalent package and its scope cannot be determined.
+ */
+ dn->handle = handle;
+ dn->data.pointer = desc;
+ list_add_tail(&dn->sibling, list);
- kfree(dn);
- acpi_handle_debug(handle, "Invalid properties/subnodes data, skipping\n");
- return false;
+ return true;
}
-static bool acpi_nondev_subnode_data_ok(acpi_handle handle,
- const union acpi_object *link,
- struct list_head *list,
- struct fwnode_handle *parent)
+static bool acpi_nondev_subnode_ok(acpi_handle scope,
+ const union acpi_object *link,
+ struct list_head *list,
+ struct fwnode_handle *parent)
{
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+ acpi_handle handle;
acpi_status status;
+ /*
+ * If the scope is unknown, the _DSD-equivalent package being parsed
+ * was embedded in an outer _DSD-equivalent package as a result of
+ * direct evaluation of an object pointed to by a reference. In that
+ * case, using a pathname as the target object pointer is invalid.
+ */
+ if (!scope)
+ return false;
+
+ status = acpi_get_handle(scope, link->package.elements[1].string.pointer,
+ &handle);
+ if (ACPI_FAILURE(status))
+ return false;
+
status = acpi_evaluate_object_typed(handle, NULL, NULL, &buf,
ACPI_TYPE_PACKAGE);
if (ACPI_FAILURE(status))
@@ -153,25 +176,6 @@ static bool acpi_nondev_subnode_data_ok(acpi_handle handle,
return false;
}
-static bool acpi_nondev_subnode_ok(acpi_handle scope,
- const union acpi_object *link,
- struct list_head *list,
- struct fwnode_handle *parent)
-{
- acpi_handle handle;
- acpi_status status;
-
- if (!scope)
- return false;
-
- status = acpi_get_handle(scope, link->package.elements[1].string.pointer,
- &handle);
- if (ACPI_FAILURE(status))
- return false;
-
- return acpi_nondev_subnode_data_ok(handle, link, list, parent);
-}
-
static bool acpi_add_nondev_subnodes(acpi_handle scope,
union acpi_object *links,
struct list_head *list,
@@ -180,9 +184,12 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
bool ret = false;
int i;
+ /*
+ * Every element in the links package is expected to represent a link
+ * to a non-device node in a tree containing device-specific data.
+ */
for (i = 0; i < links->package.count; i++) {
union acpi_object *link, *desc;
- acpi_handle handle;
bool result;
link = &links->package.elements[i];
@@ -190,26 +197,53 @@ static bool acpi_add_nondev_subnodes(acpi_handle scope,
if (link->package.count != 2)
continue;
- /* The first one must be a string. */
+ /* The first one (the key) must be a string. */
if (link->package.elements[0].type != ACPI_TYPE_STRING)
continue;
- /* The second one may be a string, a reference or a package. */
+ /* The second one (the target) may be a string or a package. */
switch (link->package.elements[1].type) {
case ACPI_TYPE_STRING:
+ /*
+ * The string is expected to be a full pathname or a
+ * pathname segment relative to the given scope. That
+ * pathname is expected to point to an object returning
+ * a package that contains _DSD-equivalent information.
+ */
result = acpi_nondev_subnode_ok(scope, link, list,
parent);
break;
- case ACPI_TYPE_LOCAL_REFERENCE:
- handle = link->package.elements[1].reference.handle;
- result = acpi_nondev_subnode_data_ok(handle, link, list,
- parent);
- break;
case ACPI_TYPE_PACKAGE:
+ /*
+ * This happens when a reference is used in AML to
+ * point to the target. Since the target is expected
+ * to be a named object, a reference to it will cause it
+ * to be avaluated in place and its return package will
+ * be embedded in the links package at the location of
+ * the reference.
+ *
+ * The target package is expected to contain _DSD-
+ * equivalent information, but the scope in which it
+ * is located in the original AML is unknown. Thus
+ * it cannot contain pathname segments represented as
+ * strings because there is no way to build full
+ * pathnames out of them.
+ */
+ acpi_handle_debug(scope, "subnode %s: Unknown scope\n",
+ link->package.elements[0].string.pointer);
desc = &link->package.elements[1];
result = acpi_nondev_subnode_extract(desc, NULL, link,
list, parent);
break;
+ case ACPI_TYPE_LOCAL_REFERENCE:
+ /*
+ * It is not expected to see any local references in
+ * the links package because referencing a named object
+ * should cause it to be evaluated in place.
+ */
+ acpi_handle_info(scope, "subnode %s: Unexpected reference\n",
+ link->package.elements[0].string.pointer);
+ fallthrough;
default:
result = false;
break;
@@ -369,6 +403,9 @@ static void acpi_untie_nondev_subnodes(struct acpi_device_data *data)
struct acpi_data_node *dn;
list_for_each_entry(dn, &data->subnodes, sibling) {
+ if (!dn->handle)
+ continue;
+
acpi_detach_data(dn->handle, acpi_nondev_subnode_tag);
acpi_untie_nondev_subnodes(&dn->data);
@@ -383,6 +420,9 @@ static bool acpi_tie_nondev_subnodes(struct acpi_device_data *data)
acpi_status status;
bool ret;
+ if (!dn->handle)
+ continue;
+
status = acpi_attach_data(dn->handle, acpi_nondev_subnode_tag, dn);
if (ACPI_FAILURE(status) && status != AE_ALREADY_EXISTS) {
acpi_handle_err(dn->handle, "Can't tag data node\n");
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index b1ab192..d16906f 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/dmi.h>
+#include <linux/string_choices.h>
#ifdef CONFIG_X86
#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
@@ -511,6 +512,13 @@ static const struct dmi_system_id irq1_level_low_skip_override[] = {
},
},
{
+ /* Asus Vivobook Pro N6506CU* */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "N6506CU"),
+ },
+ },
+ {
/* LG Electronics 17U70P */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
@@ -773,7 +781,7 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
pr_warn("ACPI: IRQ %d override to %s%s, %s%s\n", gsi,
t ? "level" : "edge",
trig == triggering ? "" : "(!)",
- p ? "low" : "high",
+ str_low_high(p),
pol == polarity ? "" : "(!)");
triggering = trig;
polarity = pol;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index fb1fe9f..880a544 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -845,6 +845,8 @@ static bool acpi_info_matches_ids(struct acpi_device_info *info,
static const char * const acpi_ignore_dep_ids[] = {
"PNP0D80", /* Windows-compatible System Power Management Controller */
"INT33BD", /* Intel Baytrail Mailbox Device */
+ "INTC10DE", /* Intel CVS LNL */
+ "INTC10E0", /* Intel CVS ARL */
"LATT2021", /* Lattice FW Update Client Driver */
NULL
};
@@ -2702,6 +2704,7 @@ void __init acpi_scan_init(void)
acpi_memory_hotplug_init();
acpi_watchdog_init();
acpi_pnp_init();
+ acpi_power_resources_init();
acpi_int340x_thermal_init();
acpi_init_lpit();
diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index cd36a97..d4d52d5 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -141,12 +141,23 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
case ACPI_DBG2_16550_NVIDIA:
uart = "uart";
break;
+ case ACPI_DBG2_RISCV_SBI_CON:
+ uart = "sbi";
+ break;
default:
err = -ENOENT;
goto done;
}
- switch (table->baud_rate) {
+ /*
+ * SPCR 1.09 defines Precise Baud Rate Filed contains a specific
+ * non-zero baud rate which overrides the value of the Configured
+ * Baud Rate field. If this field is zero or not present, Configured
+ * Baud Rate is used.
+ */
+ if (table->precise_baudrate)
+ baud_rate = table->precise_baudrate;
+ else switch (table->baud_rate) {
case 0:
/*
* SPCR 1.04 defines 0 as a preconfigured state of UART.
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index fa9bb8c..57fc8bc 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -408,7 +408,7 @@ static const char table_sigs[][ACPI_NAMESEG_SIZE] __nonstring_array __initconst
ACPI_SIG_PSDT, ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT,
ACPI_SIG_IORT, ACPI_SIG_NFIT, ACPI_SIG_HMAT, ACPI_SIG_PPTT,
ACPI_SIG_NHLT, ACPI_SIG_AEST, ACPI_SIG_CEDT, ACPI_SIG_AGDI,
- ACPI_SIG_NBFT };
+ ACPI_SIG_NBFT, ACPI_SIG_SWFT};
#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 5c2defe..8537395 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -924,7 +924,7 @@ static int acpi_thermal_suspend(struct device *dev)
static int acpi_thermal_resume(struct device *dev)
{
struct acpi_thermal *tz;
- int i, j, power_state;
+ int i, j;
if (!dev)
return -EINVAL;
@@ -939,10 +939,8 @@ static int acpi_thermal_resume(struct device *dev)
if (!acpi_thermal_trip_valid(acpi_trip))
break;
- for (j = 0; j < acpi_trip->devices.count; j++) {
- acpi_bus_update_power(acpi_trip->devices.handles[j],
- &power_state);
- }
+ for (j = 0; j < acpi_trip->devices.count; j++)
+ acpi_bus_update_power(acpi_trip->devices.handles[j], NULL);
}
acpi_queue_thermal_check(tz);
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index d507d5e0..4cf74f1 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -948,6 +948,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
},
},
+ /* https://gitlab.freedesktop.org/drm/amd/-/issues/4512 */
+ {
+ .callback = video_detect_force_native,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "82K8"),
+ },
+ },
{ },
};
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 82a8cb95..e7ebb63 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -53,6 +53,7 @@
#define SYSTEM_CLK_RATE 0x030
#define TEGRA30_CLK_PERIPH_BANKS 5
+#define TEGRA30_CLK_CLK_MAX 311
#define PLLC_BASE 0x80
#define PLLC_MISC 0x8c
diff --git a/drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c b/drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c
index 11549d8..b578547 100644
--- a/drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c
@@ -30,7 +30,7 @@ static u32 fsl_mc_msi_domain_get_msi_id(struct irq_domain *domain,
u32 out_id;
of_node = irq_domain_get_of_node(domain);
- out_id = of_node ? of_msi_map_id(&mc_dev->dev, of_node, mc_dev->icid) :
+ out_id = of_node ? of_msi_xlate(&mc_dev->dev, &of_node, mc_dev->icid) :
iort_msi_map_id(&mc_dev->dev, mc_dev->icid);
return out_id;
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index d2b6908..788ccb6 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -674,13 +674,14 @@ void __init of_irq_init(const struct of_device_id *matches)
/**
* of_msi_xlate - map a MSI ID and find relevant MSI controller node
* @dev: device for which the mapping is to be done.
- * @msi_np: Pointer to store the MSI controller node
+ * @msi_np: Pointer to target MSI controller node
* @id_in: Device ID.
*
* Walk up the device hierarchy looking for devices with a "msi-map"
- * property. If found, apply the mapping to @id_in. @msi_np pointed
- * value must be NULL on entry, if an MSI controller is found @msi_np is
- * initialized to the MSI controller node with a reference held.
+ * property. If found, apply the mapping to @id_in.
+ * If @msi_np points to a non-NULL device node pointer, only entries targeting
+ * that node will be matched; if it points to a NULL value, it will receive the
+ * device node of the first matching target phandle, with a reference held.
*
* Returns: The mapped MSI id.
*/
@@ -701,22 +702,6 @@ u32 of_msi_xlate(struct device *dev, struct device_node **msi_np, u32 id_in)
}
/**
- * of_msi_map_id - Map a MSI ID for a device.
- * @dev: device for which the mapping is to be done.
- * @msi_np: device node of the expected msi controller.
- * @id_in: unmapped MSI ID for the device.
- *
- * Walk up the device hierarchy looking for devices with a "msi-map"
- * property. If found, apply the mapping to @id_in.
- *
- * Return: The mapped MSI ID.
- */
-u32 of_msi_map_id(struct device *dev, struct device_node *msi_np, u32 id_in)
-{
- return of_msi_xlate(dev, &msi_np, id_in);
-}
-
-/**
* of_msi_map_get_device_domain - Use msi-map to find the relevant MSI domain
* @dev: device for which the mapping is to be done.
* @id: Device ID.
diff --git a/drivers/pci/msi/irqdomain.c b/drivers/pci/msi/irqdomain.c
index dfb61f1..ce741ed 100644
--- a/drivers/pci/msi/irqdomain.c
+++ b/drivers/pci/msi/irqdomain.c
@@ -459,7 +459,7 @@ u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev)
pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid);
of_node = irq_domain_get_of_node(domain);
- rid = of_node ? of_msi_map_id(&pdev->dev, of_node, rid) :
+ rid = of_node ? of_msi_xlate(&pdev->dev, &of_node, rid) :
iort_msi_map_id(&pdev->dev, rid);
return rid;
diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c
index d2ff76e..219f96f 100644
--- a/drivers/pnp/isapnp/core.c
+++ b/drivers/pnp/isapnp/core.c
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/isapnp.h>
#include <linux/mutex.h>
+#include <linux/string_choices.h>
#include <asm/io.h>
#include "../base.h"
@@ -1037,7 +1038,7 @@ static int __init isapnp_init(void)
if (cards)
printk(KERN_INFO
"isapnp: %i Plug & Play card%s detected total\n", cards,
- cards > 1 ? "s" : "");
+ str_plural(cards));
else
printk(KERN_INFO "isapnp: No Plug & Play card found\n");
diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
index d1bb59f..ea277c4 100644
--- a/drivers/thermal/gov_step_wise.c
+++ b/drivers/thermal/gov_step_wise.c
@@ -20,11 +20,13 @@
* If the temperature is higher than a trip point,
* a. if the trend is THERMAL_TREND_RAISING, use higher cooling
* state for this trip point
- * b. if the trend is THERMAL_TREND_DROPPING, do nothing
+ * b. if the trend is THERMAL_TREND_DROPPING, use a lower cooling state
+ * for this trip point, but keep the cooling state above the applicable
+ * minimum
* If the temperature is lower than a trip point,
* a. if the trend is THERMAL_TREND_RAISING, do nothing
- * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
- * state for this trip point, if the cooling state already
+ * b. if the trend is THERMAL_TREND_DROPPING, use the minimum applicable
+ * cooling state for this trip point, or if the cooling state already
* equals lower limit, deactivate the thermal instance
*/
static unsigned long get_target_state(struct thermal_instance *instance,
@@ -51,6 +53,17 @@ static unsigned long get_target_state(struct thermal_instance *instance,
if (throttle) {
if (trend == THERMAL_TREND_RAISING)
return clamp(cur_state + 1, instance->lower, instance->upper);
+
+ /*
+ * If the zone temperature is falling, the cooling level can
+ * be reduced, but it should still be above the lower state of
+ * the given thermal instance to pull the temperature further
+ * down.
+ */
+ if (trend == THERMAL_TREND_DROPPING)
+ return clamp(cur_state - 1,
+ min(instance->lower + 1, instance->upper),
+ instance->upper);
} else if (trend == THERMAL_TREND_DROPPING) {
if (cur_state <= instance->lower)
return THERMAL_NO_TARGET;
@@ -69,16 +82,14 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
const struct thermal_trip_desc *td,
int trip_threshold)
{
+ bool throttle = tz->temperature >= trip_threshold;
const struct thermal_trip *trip = &td->trip;
enum thermal_trend trend = get_tz_trend(tz, trip);
int trip_id = thermal_zone_trip_id(tz, trip);
struct thermal_instance *instance;
- bool throttle = false;
- if (tz->temperature >= trip_threshold) {
- throttle = true;
+ if (throttle)
trace_thermal_zone_trip(tz, trip_id, trip->type);
- }
dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n",
trip_id, trip->type, trip_threshold, trend, throttle);
diff --git a/drivers/thermal/intel/int340x_thermal/Kconfig b/drivers/thermal/intel/int340x_thermal/Kconfig
index 4c699f0..4ced7bdcd 100644
--- a/drivers/thermal/intel/int340x_thermal/Kconfig
+++ b/drivers/thermal/intel/int340x_thermal/Kconfig
@@ -12,6 +12,7 @@
select ACPI_THERMAL_LIB
select INTEL_SOC_DTS_IOSF_CORE
select INTEL_TCC
+ select ACPI_PLATFORM_PROFILE
select PROC_THERMAL_MMIO_RAPL if POWERCAP
help
Newer laptops and tablets that use ACPI may have thermal sensors and
diff --git a/drivers/thermal/intel/int340x_thermal/Makefile b/drivers/thermal/intel/int340x_thermal/Makefile
index 184318d..436be34 100644
--- a/drivers/thermal/intel/int340x_thermal/Makefile
+++ b/drivers/thermal/intel/int340x_thermal/Makefile
@@ -14,5 +14,6 @@
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_wt_req.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_wt_hint.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_power_floor.o
+obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_soc_slider.o
obj-$(CONFIG_INT3406_THERMAL) += int3406_thermal.o
obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o
diff --git a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
index cb149bc..ce5d53b 100644
--- a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
+++ b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c
@@ -220,9 +220,6 @@ static int acpi_parse_psvt(acpi_handle handle, int *psvt_count, struct psvt **ps
int i, result = 0;
struct psvt *psvts;
- if (!acpi_has_method(handle, "PSVT"))
- return -ENODEV;
-
status = acpi_evaluate_object(handle, "PSVT", NULL, &buffer);
if (ACPI_FAILURE(status))
return -ENODEV;
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index 29fcece..48e7849 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -338,10 +338,17 @@ static int tcc_offset_save = -1;
int proc_thermal_suspend(struct device *dev)
{
+ struct proc_thermal_device *proc_dev;
+
tcc_offset_save = intel_tcc_get_offset(-1);
if (tcc_offset_save < 0)
dev_warn(dev, "failed to save offset (%d)\n", tcc_offset_save);
+ proc_dev = dev_get_drvdata(dev);
+
+ if (proc_dev->mmio_feature_mask & PROC_THERMAL_FEATURE_SOC_POWER_SLIDER)
+ proc_thermal_soc_power_slider_suspend(proc_dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(proc_thermal_suspend);
@@ -357,6 +364,9 @@ int proc_thermal_resume(struct device *dev)
if (tcc_offset_save >= 0)
intel_tcc_set_offset(-1, tcc_offset_save);
+ if (proc_dev->mmio_feature_mask & PROC_THERMAL_FEATURE_SOC_POWER_SLIDER)
+ proc_thermal_soc_power_slider_resume(proc_dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(proc_thermal_resume);
@@ -432,8 +442,18 @@ int proc_thermal_mmio_add(struct pci_dev *pdev,
}
}
+ if (feature_mask & PROC_THERMAL_FEATURE_SOC_POWER_SLIDER) {
+ ret = proc_thermal_soc_power_slider_add(pdev, proc_priv);
+ if (ret) {
+ dev_info(&pdev->dev, "failed to add soc power efficiency slider\n");
+ goto err_rem_wlt;
+ }
+ }
+
return 0;
+err_rem_wlt:
+ proc_thermal_wt_hint_remove(pdev);
err_rem_rfim:
proc_thermal_rfim_remove(pdev);
err_rem_ptc:
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
index 4939879..3076047 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
@@ -69,6 +69,7 @@ struct rapl_mmio_regs {
#define PROC_THERMAL_FEATURE_POWER_FLOOR 0x40
#define PROC_THERMAL_FEATURE_MSI_SUPPORT 0x80
#define PROC_THERMAL_FEATURE_PTC 0x100
+#define PROC_THERMAL_FEATURE_SOC_POWER_SLIDER 0x200
#if IS_ENABLED(CONFIG_PROC_THERMAL_MMIO_RAPL)
int proc_thermal_rapl_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
@@ -127,4 +128,9 @@ int proc_thermal_mmio_add(struct pci_dev *pdev,
void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
int proc_thermal_ptc_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
void proc_thermal_ptc_remove(struct pci_dev *pdev);
+
+int proc_thermal_soc_power_slider_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
+void proc_thermal_soc_power_slider_suspend(struct proc_thermal_device *proc_priv);
+void proc_thermal_soc_power_slider_resume(struct proc_thermal_device *proc_priv);
+
#endif
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
index d4d7e8e..e247176 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
@@ -498,7 +498,8 @@ static const struct pci_device_id proc_thermal_pci_ids[] = {
{ PCI_DEVICE_DATA(INTEL, PTL_THERMAL, PROC_THERMAL_FEATURE_RAPL |
PROC_THERMAL_FEATURE_DLVR | PROC_THERMAL_FEATURE_DVFS |
PROC_THERMAL_FEATURE_MSI_SUPPORT | PROC_THERMAL_FEATURE_WT_HINT |
- PROC_THERMAL_FEATURE_POWER_FLOOR | PROC_THERMAL_FEATURE_PTC) },
+ PROC_THERMAL_FEATURE_POWER_FLOOR | PROC_THERMAL_FEATURE_PTC |
+ PROC_THERMAL_FEATURE_SOC_POWER_SLIDER) },
{ PCI_DEVICE_DATA(INTEL, WCL_THERMAL, PROC_THERMAL_FEATURE_MSI_SUPPORT |
PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_DLVR |
PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_WT_HINT |
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_soc_slider.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_soc_slider.c
new file mode 100644
index 0000000..49ff3ba
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_soc_slider.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Processor Thermal Device Interface for Reading and Writing
+ * SoC Power Slider Values from User Space.
+ *
+ * Operation:
+ * The SOC_EFFICIENCY_SLIDER_0_0_0_MCHBAR register is accessed
+ * using the MMIO (Memory-Mapped I/O) interface with an MMIO offset of 0x5B38.
+ * Although this register is 64 bits wide, only bits 7:0 are used,
+ * and the other bits remain unchanged.
+ *
+ * Bit definitions
+ *
+ * Bits 2:0 (Slider value):
+ * The SoC optimizer slider value indicates the system wide energy performance
+ * hint. The slider has no specific units and ranges from 0 (highest
+ * performance) to 6 (highest energy efficiency). Value of 7 is reserved.
+ * Bits 3 : Reserved
+ * Bits 6:4 (Offset)
+ * Offset allows the SoC to automatically switch slider position in range
+ * [slider value (bits 2:0) + offset] to improve power efficiency based on
+ * internal SoC algorithms.
+ * Bit 7 (Enable):
+ * If this bit is set, the SoC Optimization sliders will be processed by the
+ * SoC firmware.
+ *
+ * Copyright (c) 2025, Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/pci.h>
+#include <linux/platform_profile.h>
+#include "processor_thermal_device.h"
+
+#define SOC_POWER_SLIDER_OFFSET 0x5B38
+
+enum power_slider_preference {
+ SOC_POWER_SLIDER_PERFORMANCE,
+ SOC_POWER_SLIDER_BALANCE,
+ SOC_POWER_SLIDER_POWERSAVE,
+};
+
+#define SOC_SLIDER_VALUE_MINIMUM 0x00
+#define SOC_SLIDER_VALUE_BALANCE 0x03
+#define SOC_SLIDER_VALUE_MAXIMUM 0x06
+
+#define SLIDER_MASK GENMASK_ULL(2, 0)
+#define SLIDER_ENABLE_BIT 7
+
+static u8 slider_values[] = {
+ [SOC_POWER_SLIDER_PERFORMANCE] = SOC_SLIDER_VALUE_MINIMUM,
+ [SOC_POWER_SLIDER_BALANCE] = SOC_SLIDER_VALUE_BALANCE,
+ [SOC_POWER_SLIDER_POWERSAVE] = SOC_SLIDER_VALUE_MAXIMUM,
+};
+
+/* Lock to protect module param updates */
+static DEFINE_MUTEX(slider_param_lock);
+
+static int slider_balanced_param = SOC_SLIDER_VALUE_BALANCE;
+
+static int slider_def_balance_set(const char *arg, const struct kernel_param *kp)
+{
+ u8 slider_val;
+ int ret;
+
+ guard(mutex)(&slider_param_lock);
+
+ ret = kstrtou8(arg, 16, &slider_val);
+ if (!ret) {
+ if (slider_val <= slider_values[SOC_POWER_SLIDER_PERFORMANCE] ||
+ slider_val >= slider_values[SOC_POWER_SLIDER_POWERSAVE])
+ return -EINVAL;
+
+ slider_balanced_param = slider_val;
+ }
+
+ return ret;
+}
+
+static int slider_def_balance_get(char *buf, const struct kernel_param *kp)
+{
+ guard(mutex)(&slider_param_lock);
+ return sysfs_emit(buf, "%02x\n", slider_values[SOC_POWER_SLIDER_BALANCE]);
+}
+
+static const struct kernel_param_ops slider_def_balance_ops = {
+ .set = slider_def_balance_set,
+ .get = slider_def_balance_get,
+};
+
+module_param_cb(slider_balance, &slider_def_balance_ops, NULL, 0644);
+MODULE_PARM_DESC(slider_balance, "Set slider default value for balance");
+
+static u8 slider_offset;
+
+static int slider_def_offset_set(const char *arg, const struct kernel_param *kp)
+{
+ u8 offset;
+ int ret;
+
+ guard(mutex)(&slider_param_lock);
+
+ ret = kstrtou8(arg, 16, &offset);
+ if (!ret) {
+ if (offset > SOC_SLIDER_VALUE_MAXIMUM)
+ return -EINVAL;
+
+ slider_offset = offset;
+ }
+
+ return ret;
+}
+
+static int slider_def_offset_get(char *buf, const struct kernel_param *kp)
+{
+ guard(mutex)(&slider_param_lock);
+ return sysfs_emit(buf, "%02x\n", slider_offset);
+}
+
+static const struct kernel_param_ops slider_offset_ops = {
+ .set = slider_def_offset_set,
+ .get = slider_def_offset_get,
+};
+
+/*
+ * To enhance power efficiency dynamically, the firmware can optionally
+ * auto-adjust the slider value based on the current workload. This
+ * adjustment is controlled by the "slider_offset" module parameter.
+ * This offset permits the firmware to increase the slider value
+ * up to and including "SoC slider + slider offset,".
+ */
+module_param_cb(slider_offset, &slider_offset_ops, NULL, 0644);
+MODULE_PARM_DESC(slider_offset, "Set slider offset");
+
+/* Convert from platform power profile option to SoC slider value */
+static int convert_profile_to_power_slider(enum platform_profile_option profile)
+{
+ switch (profile) {
+ case PLATFORM_PROFILE_LOW_POWER:
+ return slider_values[SOC_POWER_SLIDER_POWERSAVE];
+ case PLATFORM_PROFILE_BALANCED:
+ return slider_values[SOC_POWER_SLIDER_BALANCE];
+ case PLATFORM_PROFILE_PERFORMANCE:
+ return slider_values[SOC_POWER_SLIDER_PERFORMANCE];
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+/* Convert to platform power profile option from SoC slider values */
+static int convert_power_slider_to_profile(u8 slider)
+{
+ if (slider == slider_values[SOC_POWER_SLIDER_PERFORMANCE])
+ return PLATFORM_PROFILE_PERFORMANCE;
+ if (slider == slider_values[SOC_POWER_SLIDER_BALANCE])
+ return PLATFORM_PROFILE_BALANCED;
+ if (slider == slider_values[SOC_POWER_SLIDER_POWERSAVE])
+ return PLATFORM_PROFILE_LOW_POWER;
+
+ return -EOPNOTSUPP;
+}
+
+static inline u64 read_soc_slider(struct proc_thermal_device *proc_priv)
+{
+ return readq(proc_priv->mmio_base + SOC_POWER_SLIDER_OFFSET);
+}
+
+static inline void write_soc_slider(struct proc_thermal_device *proc_priv, u64 val)
+{
+ writeq(val, proc_priv->mmio_base + SOC_POWER_SLIDER_OFFSET);
+}
+
+#define SLIDER_OFFSET_MASK GENMASK_ULL(6, 4)
+
+static void set_soc_power_profile(struct proc_thermal_device *proc_priv, int slider)
+{
+ u64 val;
+
+ val = read_soc_slider(proc_priv);
+ val &= ~SLIDER_MASK;
+ val |= FIELD_PREP(SLIDER_MASK, slider) | BIT(SLIDER_ENABLE_BIT);
+
+ /* Set the slider offset from module params */
+ val &= ~SLIDER_OFFSET_MASK;
+ val |= FIELD_PREP(SLIDER_OFFSET_MASK, slider_offset);
+
+ write_soc_slider(proc_priv, val);
+}
+
+/* profile get/set callbacks are called with a profile lock, so no need for local locks */
+
+static int power_slider_platform_profile_set(struct device *dev,
+ enum platform_profile_option profile)
+{
+ struct proc_thermal_device *proc_priv;
+ int slider;
+
+ proc_priv = dev_get_drvdata(dev);
+ if (!proc_priv)
+ return -EOPNOTSUPP;
+
+ guard(mutex)(&slider_param_lock);
+
+ slider_values[SOC_POWER_SLIDER_BALANCE] = slider_balanced_param;
+
+ slider = convert_profile_to_power_slider(profile);
+ if (slider < 0)
+ return slider;
+
+ set_soc_power_profile(proc_priv, slider);
+
+ return 0;
+}
+
+static int power_slider_platform_profile_get(struct device *dev,
+ enum platform_profile_option *profile)
+{
+ struct proc_thermal_device *proc_priv;
+ int slider, ret;
+ u64 val;
+
+ proc_priv = dev_get_drvdata(dev);
+ if (!proc_priv)
+ return -EOPNOTSUPP;
+
+ val = read_soc_slider(proc_priv);
+ slider = FIELD_GET(SLIDER_MASK, val);
+
+ ret = convert_power_slider_to_profile(slider);
+ if (ret < 0)
+ return ret;
+
+ *profile = ret;
+
+ return 0;
+}
+
+static int power_slider_platform_profile_probe(void *drvdata, unsigned long *choices)
+{
+ set_bit(PLATFORM_PROFILE_LOW_POWER, choices);
+ set_bit(PLATFORM_PROFILE_BALANCED, choices);
+ set_bit(PLATFORM_PROFILE_PERFORMANCE, choices);
+
+ return 0;
+}
+
+static const struct platform_profile_ops power_slider_platform_profile_ops = {
+ .probe = power_slider_platform_profile_probe,
+ .profile_get = power_slider_platform_profile_get,
+ .profile_set = power_slider_platform_profile_set,
+};
+
+int proc_thermal_soc_power_slider_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
+{
+ struct device *ppdev;
+
+ set_soc_power_profile(proc_priv, slider_values[SOC_POWER_SLIDER_BALANCE]);
+
+ ppdev = devm_platform_profile_register(&pdev->dev, "SoC Power Slider", proc_priv,
+ &power_slider_platform_profile_ops);
+
+ return PTR_ERR_OR_ZERO(ppdev);
+}
+EXPORT_SYMBOL_NS_GPL(proc_thermal_soc_power_slider_add, "INT340X_THERMAL");
+
+static u64 soc_slider_save;
+
+void proc_thermal_soc_power_slider_suspend(struct proc_thermal_device *proc_priv)
+{
+ soc_slider_save = read_soc_slider(proc_priv);
+}
+EXPORT_SYMBOL_NS_GPL(proc_thermal_soc_power_slider_suspend, "INT340X_THERMAL");
+
+void proc_thermal_soc_power_slider_resume(struct proc_thermal_device *proc_priv)
+{
+ write_soc_slider(proc_priv, soc_slider_save);
+}
+EXPORT_SYMBOL_NS_GPL(proc_thermal_soc_power_slider_resume, "INT340X_THERMAL");
+
+MODULE_IMPORT_NS("INT340X_THERMAL");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Processor Thermal Power Slider Interface");
diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
index a36289e..d9ec3bf 100644
--- a/drivers/thermal/k3_j72xx_bandgap.c
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -20,6 +20,8 @@
#include <linux/delay.h>
#include <linux/slab.h>
+#include "thermal_hwmon.h"
+
#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4
#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0
#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x300
@@ -513,6 +515,8 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
ret = PTR_ERR(ti_thermal);
goto err_free_ref_table;
}
+
+ devm_thermal_add_hwmon_sysfs(bgp->dev, ti_thermal);
}
platform_set_drvdata(pdev, bgp);
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index f4d1e66..ab55b20c 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -639,7 +639,7 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
lvts_sensor[i].low_thresh = INT_MIN;
lvts_sensor[i].high_thresh = INT_MIN;
- };
+ }
lvts_ctrl->valid_sensor_mask = lvts_ctrl_data->valid_sensor_mask;
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index 2c7f3f9..a6bb010 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -34,7 +34,8 @@
config QCOM_LMH
tristate "Qualcomm Limits Management Hardware"
- depends on ARCH_QCOM && QCOM_SCM
+ depends on ARCH_QCOM || COMPILE_TEST
+ select QCOM_SCM
help
This enables initialization of Qualcomm limits management
hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index 75eaa9a6..ddadcfa 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -5,6 +5,8 @@
*/
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
#include <linux/irqdomain.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -204,7 +206,7 @@ static int lmh_probe(struct platform_device *pdev)
ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low,
LMH_NODE_DCVS, node_id, 0);
if (ret) {
- dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
+ dev_err(dev, "Error setting thermal LOW threshold%d\n", ret);
return ret;
}
diff --git a/drivers/thermal/renesas/Kconfig b/drivers/thermal/renesas/Kconfig
index dcf5fc5a..c762c1c 100644
--- a/drivers/thermal/renesas/Kconfig
+++ b/drivers/thermal/renesas/Kconfig
@@ -10,13 +10,13 @@
thermal framework.
config RCAR_GEN3_THERMAL
- tristate "Renesas R-Car Gen3 and RZ/G2 thermal driver"
+ tristate "Renesas R-Car Gen3/Gen4 and RZ/G2 thermal driver"
depends on ARCH_RENESAS || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
help
- Enable this to plug the R-Car Gen3 or RZ/G2 thermal sensor driver into
- the Linux thermal framework.
+ Enable this to plug the R-Car Gen3/Gen4 or RZ/G2 thermal sensor
+ driver into the Linux thermal framework.
config RZG2L_THERMAL
tristate "Renesas RZ/G2L thermal driver"
@@ -26,3 +26,18 @@
help
Enable this to plug the RZ/G2L thermal sensor driver into the Linux
thermal framework.
+
+config RZG3S_THERMAL
+ tristate "Renesas RZ/G3S thermal driver"
+ depends on ARCH_R9A08G045 || COMPILE_TEST
+ depends on OF && IIO && RZG2L_ADC
+ help
+ Enable this to plug the RZ/G3S thermal sensor driver into the Linux
+ thermal framework.
+
+config RZG3E_THERMAL
+ tristate "Renesas RZ/G3E thermal driver"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ help
+ Enable this to plug the RZ/G3E thermal sensor driver into the Linux
+ thermal framework.
diff --git a/drivers/thermal/renesas/Makefile b/drivers/thermal/renesas/Makefile
index bf9cb3c..0ea5922 100644
--- a/drivers/thermal/renesas/Makefile
+++ b/drivers/thermal/renesas/Makefile
@@ -3,3 +3,6 @@
obj-$(CONFIG_RCAR_GEN3_THERMAL) += rcar_gen3_thermal.o
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
obj-$(CONFIG_RZG2L_THERMAL) += rzg2l_thermal.o
+obj-$(CONFIG_RZG3E_THERMAL) += rzg3e_thermal.o
+obj-$(CONFIG_RZG3S_THERMAL) += rzg3s_thermal.o
+
diff --git a/drivers/thermal/renesas/rcar_gen3_thermal.c b/drivers/thermal/renesas/rcar_gen3_thermal.c
index 24a702e..3223de2 100644
--- a/drivers/thermal/renesas/rcar_gen3_thermal.c
+++ b/drivers/thermal/renesas/rcar_gen3_thermal.c
@@ -73,11 +73,17 @@ struct rcar_gen3_thermal_fuse_info {
u32 mask;
};
+struct rcar_gen3_thermal_fuse_default {
+ u32 ptat[3];
+ u32 thcodes[TSC_MAX_NUM][3];
+};
+
struct rcar_thermal_info {
int scale;
int adj_below;
int adj_above;
const struct rcar_gen3_thermal_fuse_info *fuses;
+ const struct rcar_gen3_thermal_fuse_default *fuse_defaults;
};
struct equation_set_coef {
@@ -165,7 +171,7 @@ static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
const struct equation_set_coef *coef;
int adj, decicelsius, reg, thcode;
- /* Read register and convert to mili Celsius */
+ /* Read register and convert to millidegree Celsius */
reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
if (reg < tsc->thcode[1]) {
@@ -289,6 +295,7 @@ static void rcar_gen3_thermal_fetch_fuses(struct rcar_gen3_thermal_priv *priv)
static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
{
+ const struct rcar_gen3_thermal_fuse_default *fuse_defaults = priv->info->fuse_defaults;
unsigned int i;
u32 thscp;
@@ -297,24 +304,16 @@ static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
if (!priv->info->fuses ||
(thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) {
/* Default THCODE values in case FUSEs are not set. */
- static const int thcodes[TSC_MAX_NUM][3] = {
- { 3397, 2800, 2221 },
- { 3393, 2795, 2216 },
- { 3389, 2805, 2237 },
- { 3415, 2694, 2195 },
- { 3356, 2724, 2244 },
- };
-
- priv->ptat[0] = 2631;
- priv->ptat[1] = 1509;
- priv->ptat[2] = 435;
+ priv->ptat[0] = fuse_defaults->ptat[0];
+ priv->ptat[1] = fuse_defaults->ptat[1];
+ priv->ptat[2] = fuse_defaults->ptat[2];
for (i = 0; i < priv->num_tscs; i++) {
struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
- tsc->thcode[0] = thcodes[i][0];
- tsc->thcode[1] = thcodes[i][1];
- tsc->thcode[2] = thcodes[i][2];
+ tsc->thcode[0] = fuse_defaults->thcodes[i][0];
+ tsc->thcode[1] = fuse_defaults->thcodes[i][1];
+ tsc->thcode[2] = fuse_defaults->thcodes[i][2];
}
return false;
@@ -361,11 +360,33 @@ static const struct rcar_gen3_thermal_fuse_info rcar_gen3_thermal_fuse_info_gen4
.mask = GEN4_FUSE_MASK,
};
+static const struct rcar_gen3_thermal_fuse_default rcar_gen3_thermal_fuse_default_info_gen3 = {
+ .ptat = { 2631, 1509, 435 },
+ .thcodes = {
+ { 3397, 2800, 2221 },
+ { 3393, 2795, 2216 },
+ { 3389, 2805, 2237 },
+ { 3415, 2694, 2195 },
+ { 3356, 2724, 2244 },
+ },
+};
+
+static const struct rcar_gen3_thermal_fuse_default rcar_gen3_thermal_fuse_default_info_gen4 = {
+ .ptat = { 3274, 2164, 985 },
+ .thcodes = { /* All four THS units share the same trimming */
+ { 3218, 2617, 1980 },
+ { 3218, 2617, 1980 },
+ { 3218, 2617, 1980 },
+ { 3218, 2617, 1980 },
+ }
+};
+
static const struct rcar_thermal_info rcar_m3w_thermal_info = {
.scale = 157,
.adj_below = -41,
.adj_above = 116,
.fuses = &rcar_gen3_thermal_fuse_info_gen3,
+ .fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen3,
};
static const struct rcar_thermal_info rcar_gen3_thermal_info = {
@@ -373,6 +394,15 @@ static const struct rcar_thermal_info rcar_gen3_thermal_info = {
.adj_below = -41,
.adj_above = 126,
.fuses = &rcar_gen3_thermal_fuse_info_gen3,
+ .fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen3,
+};
+
+static const struct rcar_thermal_info rcar_s4_thermal_info = {
+ .scale = 167,
+ .adj_below = -41,
+ .adj_above = 126,
+ .fuses = &rcar_gen3_thermal_fuse_info_gen4,
+ .fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen3,
};
static const struct rcar_thermal_info rcar_gen4_thermal_info = {
@@ -380,6 +410,7 @@ static const struct rcar_thermal_info rcar_gen4_thermal_info = {
.adj_below = -41,
.adj_above = 126,
.fuses = &rcar_gen3_thermal_fuse_info_gen4,
+ .fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen4,
};
static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
@@ -421,7 +452,7 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
},
{
.compatible = "renesas,r8a779f0-thermal",
- .data = &rcar_gen4_thermal_info,
+ .data = &rcar_s4_thermal_info,
},
{
.compatible = "renesas,r8a779g0-thermal",
diff --git a/drivers/thermal/renesas/rzg3e_thermal.c b/drivers/thermal/renesas/rzg3e_thermal.c
new file mode 100644
index 0000000..e66d73c
--- /dev/null
+++ b/drivers/thermal/renesas/rzg3e_thermal.c
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G3E TSU Temperature Sensor Unit
+ *
+ * Copyright (C) 2025 Renesas Electronics Corporation
+ */
+#include <linux/clk.h>
+#include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "../thermal_hwmon.h"
+
+/* TSU Register offsets and bits */
+#define TSU_SSUSR 0x00
+#define TSU_SSUSR_EN_TS BIT(0)
+#define TSU_SSUSR_ADC_PD_TS BIT(1)
+#define TSU_SSUSR_SOC_TS_EN BIT(2)
+
+#define TSU_STRGR 0x04
+#define TSU_STRGR_ADST BIT(0)
+
+#define TSU_SOSR1 0x08
+#define TSU_SOSR1_ADCT_8 0x03
+#define TSU_SOSR1_ADCS BIT(4)
+#define TSU_SOSR1_OUTSEL BIT(9)
+
+#define TSU_SCRR 0x10
+#define TSU_SCRR_OUT12BIT_TS GENMASK(11, 0)
+
+#define TSU_SSR 0x14
+#define TSU_SSR_CONV BIT(0)
+
+#define TSU_CMSR 0x18
+#define TSU_CMSR_CMPEN BIT(0)
+
+#define TSU_LLSR 0x1C
+#define TSU_ULSR 0x20
+
+#define TSU_SISR 0x30
+#define TSU_SISR_ADF BIT(0)
+#define TSU_SISR_CMPF BIT(1)
+
+#define TSU_SIER 0x34
+#define TSU_SIER_CMPIE BIT(1)
+
+#define TSU_SICR 0x38
+#define TSU_SICR_ADCLR BIT(0)
+#define TSU_SICR_CMPCLR BIT(1)
+
+/* Temperature calculation constants from datasheet */
+#define TSU_TEMP_D (-41)
+#define TSU_TEMP_E 126
+#define TSU_CODE_MAX 0xFFF
+
+/* Timing specifications from datasheet */
+#define TSU_POWERUP_TIME_US 120 /* 120T at 1MHz sensor clock per datasheet */
+#define TSU_CONV_TIME_US 50 /* Per sample conversion time */
+#define TSU_POLL_DELAY_US 10 /* Polling interval */
+#define TSU_MIN_CLOCK_RATE 24000000 /* TSU_PCLK minimum 24MHz */
+
+/**
+ * struct rzg3e_thermal_priv - RZ/G3E TSU private data
+ * @base: TSU register base
+ * @dev: device pointer
+ * @syscon: regmap for calibration values
+ * @zone: thermal zone device
+ * @rstc: reset control
+ * @trmval0: calibration value 0 (b)
+ * @trmval1: calibration value 1 (c)
+ * @trim_offset: offset for trim registers in syscon
+ * @lock: protects hardware access during conversions
+ */
+struct rzg3e_thermal_priv {
+ void __iomem *base;
+ struct device *dev;
+ struct regmap *syscon;
+ struct thermal_zone_device *zone;
+ struct reset_control *rstc;
+ u16 trmval0;
+ u16 trmval1;
+ u32 trim_offset;
+ struct mutex lock;
+};
+
+static int rzg3e_thermal_power_on(struct rzg3e_thermal_priv *priv)
+{
+ u32 val;
+ int ret;
+
+ /* Clear any pending interrupts */
+ writel(TSU_SICR_ADCLR | TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+
+ /* Disable all interrupts during setup */
+ writel(0, priv->base + TSU_SIER);
+
+ /*
+ * Power-on sequence per datasheet 7.11.9.1:
+ * SOC_TS_EN must be set at same time or before EN_TS and ADC_PD_TS
+ */
+ val = TSU_SSUSR_SOC_TS_EN | TSU_SSUSR_EN_TS;
+ writel(val, priv->base + TSU_SSUSR);
+
+ /* Wait for sensor stabilization per datasheet 7.11.7.1 */
+ usleep_range(TSU_POWERUP_TIME_US, TSU_POWERUP_TIME_US + 10);
+
+ /* Configure for average mode with 8 samples */
+ val = TSU_SOSR1_OUTSEL | TSU_SOSR1_ADCT_8;
+ writel(val, priv->base + TSU_SOSR1);
+
+ /* Ensure we're in single scan mode (default) */
+ val = readl(priv->base + TSU_SOSR1);
+ if (val & TSU_SOSR1_ADCS) {
+ dev_err(priv->dev, "Invalid scan mode setting\n");
+ return -EINVAL;
+ }
+
+ /* Wait for any ongoing conversion to complete */
+ ret = readl_poll_timeout(priv->base + TSU_SSR, val,
+ !(val & TSU_SSR_CONV),
+ TSU_POLL_DELAY_US,
+ USEC_PER_MSEC);
+ if (ret) {
+ dev_err(priv->dev, "Timeout waiting for conversion\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void rzg3e_thermal_power_off(struct rzg3e_thermal_priv *priv)
+{
+ /* Disable all interrupts */
+ writel(0, priv->base + TSU_SIER);
+
+ /* Clear pending interrupts */
+ writel(TSU_SICR_ADCLR | TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+
+ /* Power down sequence per datasheet */
+ writel(TSU_SSUSR_ADC_PD_TS, priv->base + TSU_SSUSR);
+}
+
+/*
+ * Convert 12-bit sensor code to temperature in millicelsius
+ * Formula from datasheet 7.11.7.8:
+ * T(°C) = ((e - d) / (c - b)) * (a - b) + d
+ * where: a = sensor code, b = trmval0, c = trmval1, d = -41, e = 126
+ */
+static int rzg3e_thermal_code_to_temp(struct rzg3e_thermal_priv *priv, u16 code)
+{
+ int temp_e_mc = TSU_TEMP_E * MILLIDEGREE_PER_DEGREE;
+ int temp_d_mc = TSU_TEMP_D * MILLIDEGREE_PER_DEGREE;
+ s64 numerator, denominator;
+ int temp_mc;
+
+ numerator = (temp_e_mc - temp_d_mc) * (s64)(code - priv->trmval0);
+ denominator = priv->trmval1 - priv->trmval0;
+
+ temp_mc = div64_s64(numerator, denominator) + temp_d_mc;
+
+ return clamp(temp_mc, temp_d_mc, temp_e_mc);
+}
+
+/*
+ * Convert temperature in millicelsius to 12-bit sensor code
+ * Formula from datasheet 7.11.7.9 (inverse of above)
+ */
+static u16 rzg3e_thermal_temp_to_code(struct rzg3e_thermal_priv *priv, int temp_mc)
+{
+ int temp_e_mc = TSU_TEMP_E * MILLIDEGREE_PER_DEGREE;
+ int temp_d_mc = TSU_TEMP_D * MILLIDEGREE_PER_DEGREE;
+ s64 numerator, denominator;
+ s64 code;
+
+ numerator = (temp_mc - temp_d_mc) * (priv->trmval1 - priv->trmval0);
+ denominator = temp_e_mc - temp_d_mc;
+
+ code = div64_s64(numerator, denominator) + priv->trmval0;
+
+ return clamp_val(code, 0, TSU_CODE_MAX);
+}
+
+static int rzg3e_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+ struct rzg3e_thermal_priv *priv = thermal_zone_device_priv(tz);
+ u32 status, code;
+ int ret, timeout;
+
+ ret = pm_runtime_resume_and_get(priv->dev);
+ if (ret < 0)
+ return ret;
+
+ guard(mutex)(&priv->lock);
+
+ /* Clear any previous conversion status */
+ writel(TSU_SICR_ADCLR, priv->base + TSU_SICR);
+
+ /* Start single conversion */
+ writel(TSU_STRGR_ADST, priv->base + TSU_STRGR);
+
+ /* Wait for conversion completion - 8 samples at ~50us each */
+ timeout = TSU_CONV_TIME_US * 8 * 2; /* Double for margin */
+ ret = readl_poll_timeout(priv->base + TSU_SISR, status,
+ status & TSU_SISR_ADF,
+ TSU_POLL_DELAY_US, timeout);
+ if (ret) {
+ dev_err(priv->dev, "Conversion timeout (status=0x%08x)\n", status);
+ goto out;
+ }
+
+ /* Read the averaged result and clear the complete flag */
+ code = readl(priv->base + TSU_SCRR) & TSU_SCRR_OUT12BIT_TS;
+ writel(TSU_SICR_ADCLR, priv->base + TSU_SICR);
+
+ /* Convert to temperature */
+ *temp = rzg3e_thermal_code_to_temp(priv, code);
+
+ dev_dbg(priv->dev, "temp=%d mC (%d.%03d°C), code=0x%03x\n",
+ *temp, *temp / 1000, abs(*temp) % 1000, code);
+
+out:
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+ return ret;
+}
+
+static int rzg3e_thermal_set_trips(struct thermal_zone_device *tz,
+ int low, int high)
+{
+ struct rzg3e_thermal_priv *priv = thermal_zone_device_priv(tz);
+ u16 low_code, high_code;
+ u32 val;
+ int ret;
+
+ /* Hardware requires low < high */
+ if (low >= high)
+ return -EINVAL;
+
+ ret = pm_runtime_resume_and_get(priv->dev);
+ if (ret < 0)
+ return ret;
+
+ guard(mutex)(&priv->lock);
+
+ /* Convert temperatures to codes */
+ low_code = rzg3e_thermal_temp_to_code(priv, low);
+ high_code = rzg3e_thermal_temp_to_code(priv, high);
+
+ dev_dbg(priv->dev, "set_trips: low=%d high=%d (codes: 0x%03x/0x%03x)\n",
+ low, high, low_code, high_code);
+
+ /* Disable comparison during reconfiguration */
+ writel(0, priv->base + TSU_SIER);
+ writel(0, priv->base + TSU_CMSR);
+
+ /* Clear any pending comparison interrupts */
+ writel(TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+
+ /* Set trip points */
+ writel(low_code, priv->base + TSU_LLSR);
+ writel(high_code, priv->base + TSU_ULSR);
+
+ /*
+ * Ensure OUTSEL is set for comparison per datasheet 7.11.7.4
+ * Comparison uses averaged data
+ */
+ val = readl(priv->base + TSU_SOSR1);
+ val |= TSU_SOSR1_OUTSEL;
+ writel(val, priv->base + TSU_SOSR1);
+
+ /* Enable comparison with "out of range" mode (CMPCOND=0) */
+ writel(TSU_CMSR_CMPEN, priv->base + TSU_CMSR);
+
+ /* Unmask compare IRQ and start a conversion to evaluate window */
+ writel(TSU_SIER_CMPIE, priv->base + TSU_SIER);
+ writel(TSU_STRGR_ADST, priv->base + TSU_STRGR);
+
+ pm_runtime_mark_last_busy(priv->dev);
+ pm_runtime_put_autosuspend(priv->dev);
+
+ return 0;
+}
+
+static irqreturn_t rzg3e_thermal_irq_thread(int irq, void *data)
+{
+ struct rzg3e_thermal_priv *priv = data;
+
+ dev_dbg(priv->dev, "Temperature threshold crossed\n");
+
+ /* Notify thermal framework to re-evaluate trip points */
+ thermal_zone_device_update(priv->zone, THERMAL_TRIP_VIOLATED);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rzg3e_thermal_irq(int irq, void *data)
+{
+ struct rzg3e_thermal_priv *priv = data;
+ u32 status;
+
+ status = readl(priv->base + TSU_SISR);
+
+ /* Check if comparison interrupt occurred */
+ if (status & TSU_SISR_CMPF) {
+ /* Clear irq flag and disable interrupt until reconfigured */
+ writel(TSU_SICR_CMPCLR, priv->base + TSU_SICR);
+ writel(0, priv->base + TSU_SIER);
+
+ return IRQ_WAKE_THREAD;
+ }
+
+ return IRQ_NONE;
+}
+
+static const struct thermal_zone_device_ops rzg3e_tz_ops = {
+ .get_temp = rzg3e_thermal_get_temp,
+ .set_trips = rzg3e_thermal_set_trips,
+};
+
+static int rzg3e_thermal_get_calibration(struct rzg3e_thermal_priv *priv)
+{
+ u32 val;
+ int ret;
+
+ /* Read calibration values from syscon */
+ ret = regmap_read(priv->syscon, priv->trim_offset, &val);
+ if (ret)
+ return ret;
+ priv->trmval0 = val & GENMASK(11, 0);
+
+ ret = regmap_read(priv->syscon, priv->trim_offset + 4, &val);
+ if (ret)
+ return ret;
+ priv->trmval1 = val & GENMASK(11, 0);
+
+ /* Validate calibration data */
+ if (!priv->trmval0 || !priv->trmval1 ||
+ priv->trmval0 == priv->trmval1 ||
+ priv->trmval0 == 0xFFF || priv->trmval1 == 0xFFF) {
+ dev_err(priv->dev, "Invalid calibration: b=0x%03x, c=0x%03x\n",
+ priv->trmval0, priv->trmval1);
+ return -EINVAL;
+ }
+
+ dev_dbg(priv->dev, "Calibration: b=0x%03x (%u), c=0x%03x (%u)\n",
+ priv->trmval0, priv->trmval0, priv->trmval1, priv->trmval1);
+
+ return 0;
+}
+
+static int rzg3e_thermal_parse_dt(struct rzg3e_thermal_priv *priv)
+{
+ struct device_node *np = priv->dev->of_node;
+ u32 offset;
+
+ priv->syscon = syscon_regmap_lookup_by_phandle_args(np, "renesas,tsu-trim", 1, &offset);
+ if (IS_ERR(priv->syscon))
+ return dev_err_probe(priv->dev, PTR_ERR(priv->syscon),
+ "Failed to parse renesas,tsu-trim\n");
+
+ priv->trim_offset = offset;
+ return 0;
+}
+
+static int rzg3e_thermal_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rzg3e_thermal_priv *priv;
+ struct clk *clk;
+ int irq, ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ ret = devm_mutex_init(dev, &priv->lock);
+ if (ret)
+ return ret;
+ platform_set_drvdata(pdev, priv);
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ /* Parse device tree for trim register info */
+ ret = rzg3e_thermal_parse_dt(priv);
+ if (ret)
+ return ret;
+
+ /* Get clock to verify frequency - clock is managed by power domain */
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk),
+ "Failed to get clock\n");
+
+ if (clk_get_rate(clk) < TSU_MIN_CLOCK_RATE)
+ return dev_err_probe(dev, -EINVAL,
+ "Clock rate %lu Hz too low (min %u Hz)\n",
+ clk_get_rate(clk), TSU_MIN_CLOCK_RATE);
+
+ priv->rstc = devm_reset_control_get_exclusive_deasserted(dev, NULL);
+ if (IS_ERR(priv->rstc))
+ return dev_err_probe(dev, PTR_ERR(priv->rstc),
+ "Failed to get/deassert reset control\n");
+
+ /* Get calibration data */
+ ret = rzg3e_thermal_get_calibration(priv);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to get valid calibration data\n");
+
+ /* Get comparison interrupt */
+ irq = platform_get_irq_byname(pdev, "adcmpi");
+ if (irq < 0)
+ return irq;
+
+ /* Enable runtime PM */
+ pm_runtime_set_autosuspend_delay(dev, 1000);
+ pm_runtime_use_autosuspend(dev);
+ devm_pm_runtime_enable(dev);
+
+ /* Initial hardware setup */
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Runtime resume failed\n");
+
+ /* Register thermal zone - this will trigger DT parsing */
+ priv->zone = devm_thermal_of_zone_register(dev, 0, priv, &rzg3e_tz_ops);
+ if (IS_ERR(priv->zone)) {
+ ret = PTR_ERR(priv->zone);
+ dev_err(dev, "Failed to register thermal zone: %d\n", ret);
+ goto err_pm_put;
+ }
+
+ /* Request threaded IRQ for comparison interrupt */
+ ret = devm_request_threaded_irq(dev, irq, rzg3e_thermal_irq,
+ rzg3e_thermal_irq_thread,
+ IRQF_ONESHOT, "rzg3e_thermal", priv);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ: %d\n", ret);
+ goto err_pm_put;
+ }
+
+ /* Add hwmon sysfs interface */
+ ret = devm_thermal_add_hwmon_sysfs(dev, priv->zone);
+ if (ret)
+ dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ dev_info(dev, "RZ/G3E thermal sensor registered\n");
+
+ return 0;
+
+err_pm_put:
+ pm_runtime_put_sync(dev);
+ return ret;
+}
+
+static int rzg3e_thermal_runtime_suspend(struct device *dev)
+{
+ struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+
+ rzg3e_thermal_power_off(priv);
+ return 0;
+}
+
+static int rzg3e_thermal_runtime_resume(struct device *dev)
+{
+ struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+
+ return rzg3e_thermal_power_on(priv);
+}
+
+static int rzg3e_thermal_suspend(struct device *dev)
+{
+ struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+
+ /* If device is active, power it off */
+ if (pm_runtime_active(dev))
+ rzg3e_thermal_power_off(priv);
+
+ /* Assert reset to ensure clean state after resume */
+ reset_control_assert(priv->rstc);
+
+ return 0;
+}
+
+static int rzg3e_thermal_resume(struct device *dev)
+{
+ struct rzg3e_thermal_priv *priv = dev_get_drvdata(dev);
+ int ret;
+
+ /* Deassert reset */
+ ret = reset_control_deassert(priv->rstc);
+ if (ret) {
+ dev_err(dev, "Failed to deassert reset: %d\n", ret);
+ return ret;
+ }
+
+ /* If device was active before suspend, power it back on */
+ if (pm_runtime_active(dev))
+ return rzg3e_thermal_power_on(priv);
+
+ return 0;
+}
+
+static const struct dev_pm_ops rzg3e_thermal_pm_ops = {
+ RUNTIME_PM_OPS(rzg3e_thermal_runtime_suspend,
+ rzg3e_thermal_runtime_resume, NULL)
+ SYSTEM_SLEEP_PM_OPS(rzg3e_thermal_suspend, rzg3e_thermal_resume)
+};
+
+static const struct of_device_id rzg3e_thermal_dt_ids[] = {
+ { .compatible = "renesas,r9a09g047-tsu" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg3e_thermal_dt_ids);
+
+static struct platform_driver rzg3e_thermal_driver = {
+ .driver = {
+ .name = "rzg3e_thermal",
+ .of_match_table = rzg3e_thermal_dt_ids,
+ .pm = pm_ptr(&rzg3e_thermal_pm_ops),
+ },
+ .probe = rzg3e_thermal_probe,
+};
+module_platform_driver(rzg3e_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G3E TSU Thermal Sensor Driver");
+MODULE_AUTHOR("John Madieu <john.madieu.xa@bp.renesas.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/renesas/rzg3s_thermal.c b/drivers/thermal/renesas/rzg3s_thermal.c
new file mode 100644
index 0000000..e25e36c
--- /dev/null
+++ b/drivers/thermal/renesas/rzg3s_thermal.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G3S TSU Thermal Sensor Driver
+ *
+ * Copyright (C) 2024 Renesas Electronics Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/iio/consumer.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/units.h>
+
+#include "../thermal_hwmon.h"
+
+#define TSU_SM 0x0
+#define TSU_SM_EN BIT(0)
+#define TSU_SM_OE BIT(1)
+#define OTPTSUTRIM_REG(n) (0x18 + (n) * 0x4)
+#define OTPTSUTRIM_EN_MASK BIT(31)
+#define OTPTSUTRIM_MASK GENMASK(11, 0)
+
+#define TSU_READ_STEPS 8
+
+/* Default calibration values, if FUSE values are missing. */
+#define SW_CALIB0_VAL 1297
+#define SW_CALIB1_VAL 751
+
+#define MCELSIUS(temp) ((temp) * MILLIDEGREE_PER_DEGREE)
+
+/**
+ * struct rzg3s_thermal_priv - RZ/G3S thermal private data structure
+ * @base: TSU base address
+ * @dev: device pointer
+ * @tz: thermal zone pointer
+ * @rstc: reset control
+ * @channel: IIO channel to read the TSU
+ * @mode: current device mode
+ * @calib0: calibration value
+ * @calib1: calibration value
+ */
+struct rzg3s_thermal_priv {
+ void __iomem *base;
+ struct device *dev;
+ struct thermal_zone_device *tz;
+ struct reset_control *rstc;
+ struct iio_channel *channel;
+ enum thermal_device_mode mode;
+ u16 calib0;
+ u16 calib1;
+};
+
+static int rzg3s_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+ struct rzg3s_thermal_priv *priv = thermal_zone_device_priv(tz);
+ int ts_code_ave = 0;
+
+ if (priv->mode != THERMAL_DEVICE_ENABLED)
+ return -EAGAIN;
+
+ for (u8 i = 0; i < TSU_READ_STEPS; i++) {
+ int ret, val;
+
+ ret = iio_read_channel_raw(priv->channel, &val);
+ if (ret < 0)
+ return ret;
+
+ ts_code_ave += val;
+ /*
+ * According to the HW manual (Rev.1.10, section 40.4.4 Procedure for Measuring
+ * the Temperature) we need to wait here at leat 3us.
+ */
+ usleep_range(5, 10);
+ }
+
+ ts_code_ave = DIV_ROUND_CLOSEST(MCELSIUS(ts_code_ave), TSU_READ_STEPS);
+
+ /*
+ * According to the HW manual (Rev.1.10, section 40.4.4 Procedure for Measuring the
+ * Temperature) the computation formula is as follows:
+ *
+ * Tj = (ts_code_ave - priv->calib1) * 165 / (priv->calib0 - priv->calib1) - 40
+ *
+ * Convert everything to milli Celsius before applying the formula to avoid
+ * losing precision.
+ */
+
+ *temp = div_s64((s64)(ts_code_ave - MCELSIUS(priv->calib1)) * MCELSIUS(165),
+ MCELSIUS(priv->calib0 - priv->calib1)) - MCELSIUS(40);
+
+ /* Report it in milli degrees Celsius and round it up to 0.5 degrees Celsius. */
+ *temp = roundup(*temp, 500);
+
+ return 0;
+}
+
+static void rzg3s_thermal_set_mode(struct rzg3s_thermal_priv *priv,
+ enum thermal_device_mode mode)
+{
+ struct device *dev = priv->dev;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ return;
+
+ if (mode == THERMAL_DEVICE_DISABLED) {
+ writel(0, priv->base + TSU_SM);
+ } else {
+ writel(TSU_SM_EN, priv->base + TSU_SM);
+ /*
+ * According to the HW manual (Rev.1.10, section 40.4.1 Procedure for
+ * Starting the TSU) we need to wait here 30us or more.
+ */
+ usleep_range(30, 40);
+
+ writel(TSU_SM_OE | TSU_SM_EN, priv->base + TSU_SM);
+ /*
+ * According to the HW manual (Rev.1.10, section 40.4.1 Procedure for
+ * Starting the TSU) we need to wait here 50us or more.
+ */
+ usleep_range(50, 60);
+ }
+
+ pm_runtime_put_autosuspend(dev);
+}
+
+static int rzg3s_thermal_change_mode(struct thermal_zone_device *tz,
+ enum thermal_device_mode mode)
+{
+ struct rzg3s_thermal_priv *priv = thermal_zone_device_priv(tz);
+
+ if (priv->mode == mode)
+ return 0;
+
+ rzg3s_thermal_set_mode(priv, mode);
+ priv->mode = mode;
+
+ return 0;
+}
+
+static const struct thermal_zone_device_ops rzg3s_tz_of_ops = {
+ .get_temp = rzg3s_thermal_get_temp,
+ .change_mode = rzg3s_thermal_change_mode,
+};
+
+static int rzg3s_thermal_read_calib(struct rzg3s_thermal_priv *priv)
+{
+ struct device *dev = priv->dev;
+ u32 val;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ return ret;
+
+ val = readl(priv->base + OTPTSUTRIM_REG(0));
+ if (val & OTPTSUTRIM_EN_MASK)
+ priv->calib0 = FIELD_GET(OTPTSUTRIM_MASK, val);
+ else
+ priv->calib0 = SW_CALIB0_VAL;
+
+ val = readl(priv->base + OTPTSUTRIM_REG(1));
+ if (val & OTPTSUTRIM_EN_MASK)
+ priv->calib1 = FIELD_GET(OTPTSUTRIM_MASK, val);
+ else
+ priv->calib1 = SW_CALIB1_VAL;
+
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+}
+
+static int rzg3s_thermal_probe(struct platform_device *pdev)
+{
+ struct rzg3s_thermal_priv *priv;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->channel = devm_iio_channel_get(dev, "tsu");
+ if (IS_ERR(priv->channel))
+ return dev_err_probe(dev, PTR_ERR(priv->channel), "Failed to get IIO channel!\n");
+
+ priv->rstc = devm_reset_control_get_exclusive_deasserted(dev, NULL);
+ if (IS_ERR(priv->rstc))
+ return dev_err_probe(dev, PTR_ERR(priv->rstc), "Failed to get reset!\n");
+
+ priv->dev = dev;
+ priv->mode = THERMAL_DEVICE_DISABLED;
+ platform_set_drvdata(pdev, priv);
+
+ pm_runtime_set_autosuspend_delay(dev, 300);
+ pm_runtime_use_autosuspend(dev);
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable runtime PM!\n");
+
+ ret = rzg3s_thermal_read_calib(priv);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to read calibration data!\n");
+
+ priv->tz = devm_thermal_of_zone_register(dev, 0, priv, &rzg3s_tz_of_ops);
+ if (IS_ERR(priv->tz))
+ return dev_err_probe(dev, PTR_ERR(priv->tz), "Failed to register thermal zone!\n");
+
+ ret = devm_thermal_add_hwmon_sysfs(dev, priv->tz);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to add hwmon sysfs!\n");
+
+ return 0;
+}
+
+static int rzg3s_thermal_suspend(struct device *dev)
+{
+ struct rzg3s_thermal_priv *priv = dev_get_drvdata(dev);
+
+ rzg3s_thermal_set_mode(priv, THERMAL_DEVICE_DISABLED);
+
+ return reset_control_assert(priv->rstc);
+}
+
+static int rzg3s_thermal_resume(struct device *dev)
+{
+ struct rzg3s_thermal_priv *priv = dev_get_drvdata(dev);
+ int ret;
+
+ ret = reset_control_deassert(priv->rstc);
+ if (ret)
+ return ret;
+
+ if (priv->mode != THERMAL_DEVICE_DISABLED)
+ rzg3s_thermal_set_mode(priv, priv->mode);
+
+ return 0;
+}
+
+static const struct dev_pm_ops rzg3s_thermal_pm_ops = {
+ SYSTEM_SLEEP_PM_OPS(rzg3s_thermal_suspend, rzg3s_thermal_resume)
+};
+
+static const struct of_device_id rzg3s_thermal_dt_ids[] = {
+ { .compatible = "renesas,r9a08g045-tsu" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg3s_thermal_dt_ids);
+
+static struct platform_driver rzg3s_thermal_driver = {
+ .driver = {
+ .name = "rzg3s-thermal",
+ .of_match_table = rzg3s_thermal_dt_ids,
+ .pm = pm_ptr(&rzg3s_thermal_pm_ops),
+ },
+ .probe = rzg3s_thermal_probe,
+};
+module_platform_driver(rzg3s_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G3S Thermal Sensor Unit Driver");
+MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 3beff9b..c49ddf7 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -74,6 +74,7 @@ struct chip_tsadc_table {
* @tshut_temp: the hardware-controlled shutdown temperature value, with no trim
* @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
* @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
+ * @grf_required: true, if a GRF is required for proper functionality
* @initialize: SoC special initialize tsadc controller method
* @irq_ack: clear the interrupt
* @control: enable/disable method for the tsadc controller
@@ -97,6 +98,9 @@ struct rockchip_tsadc_chip {
enum tshut_mode tshut_mode;
enum tshut_polarity tshut_polarity;
+ /* GRF availability */
+ bool grf_required;
+
/* Chip-wide methods */
void (*initialize)(struct regmap *grf,
void __iomem *reg, enum tshut_polarity p);
@@ -1098,10 +1102,9 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
/* cpu, gpu */
.chn_offset = 0,
.chn_num = 2, /* 2 channels for tsadc */
-
+ .grf_required = true,
.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv4_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
@@ -1109,7 +1112,6 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3328_code_table,
.length = ARRAY_SIZE(rk3328_code_table),
@@ -1122,11 +1124,10 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
/* cpu */
.chn_offset = 0,
.chn_num = 1, /* one channel for tsadc */
-
+ .grf_required = false,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv2_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
@@ -1134,7 +1135,6 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rv1108_table,
.length = ARRAY_SIZE(rv1108_table),
@@ -1147,11 +1147,10 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
/* cpu */
.chn_offset = 0,
.chn_num = 1, /* one channel for tsadc */
-
+ .grf_required = false,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv2_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
@@ -1159,7 +1158,6 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3228_code_table,
.length = ARRAY_SIZE(rk3228_code_table),
@@ -1172,11 +1170,10 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
/* cpu, gpu */
.chn_offset = 1,
.chn_num = 2, /* two channels for tsadc */
-
+ .grf_required = false,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv2_initialize,
.irq_ack = rk_tsadcv2_irq_ack,
.control = rk_tsadcv2_control,
@@ -1184,7 +1181,6 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3288_code_table,
.length = ARRAY_SIZE(rk3288_code_table),
@@ -1197,10 +1193,9 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
/* cpu */
.chn_offset = 0,
.chn_num = 1, /* one channels for tsadc */
-
+ .grf_required = false,
.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv2_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
@@ -1208,7 +1203,6 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3328_code_table,
.length = ARRAY_SIZE(rk3328_code_table),
@@ -1221,11 +1215,10 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
/* cpu, gpu */
.chn_offset = 0,
.chn_num = 2, /* two channels for tsadc */
-
+ .grf_required = true,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv3_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
@@ -1233,7 +1226,6 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3228_code_table,
.length = ARRAY_SIZE(rk3228_code_table),
@@ -1246,11 +1238,10 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
/* cpu, gpu */
.chn_offset = 0,
.chn_num = 2, /* two channels for tsadc */
-
+ .grf_required = false,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv2_initialize,
.irq_ack = rk_tsadcv2_irq_ack,
.control = rk_tsadcv2_control,
@@ -1258,7 +1249,6 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3368_code_table,
.length = ARRAY_SIZE(rk3368_code_table),
@@ -1271,11 +1261,10 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
/* cpu, gpu */
.chn_offset = 0,
.chn_num = 2, /* two channels for tsadc */
-
+ .grf_required = true,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv3_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
@@ -1283,7 +1272,6 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3399_code_table,
.length = ARRAY_SIZE(rk3399_code_table),
@@ -1296,11 +1284,10 @@ static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
/* cpu, gpu */
.chn_offset = 0,
.chn_num = 2, /* two channels for tsadc */
-
+ .grf_required = true,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
-
.initialize = rk_tsadcv7_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
@@ -1308,7 +1295,6 @@ static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
.set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
-
.table = {
.id = rk3568_code_table,
.length = ARRAY_SIZE(rk3568_code_table),
@@ -1321,6 +1307,7 @@ static const struct rockchip_tsadc_chip rk3576_tsadc_data = {
/* top, big_core, little_core, ddr, npu, gpu */
.chn_offset = 0,
.chn_num = 6, /* six channels for tsadc */
+ .grf_required = false,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
@@ -1345,6 +1332,7 @@ static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
/* top, big_core0, big_core1, little_core, center, gpu, npu */
.chn_offset = 0,
.chn_num = 7, /* seven channels for tsadc */
+ .grf_required = false,
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
@@ -1621,12 +1609,10 @@ static int rockchip_configure_from_dt(struct device *dev,
return -EINVAL;
}
- /* The tsadc wont to handle the error in here since some SoCs didn't
- * need this property.
- */
thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
- if (IS_ERR(thermal->grf))
- dev_warn(dev, "Missing rockchip,grf property\n");
+ if (IS_ERR(thermal->grf) && thermal->chip->grf_required)
+ return dev_err_probe(dev, PTR_ERR(thermal->grf),
+ "Missing rockchip,grf property\n");
rockchip_get_trim_configuration(dev, np, thermal);
diff --git a/drivers/thermal/tegra/Makefile b/drivers/thermal/tegra/Makefile
index eb27d19..9b3e91f 100644
--- a/drivers/thermal/tegra/Makefile
+++ b/drivers/thermal/tegra/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_TEGRA30_TSENSOR) += tegra30-tsensor.o
tegra-soctherm-y := soctherm.o soctherm-fuse.o
+tegra-soctherm-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114-soctherm.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124-soctherm.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-soctherm.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-soctherm.o
diff --git a/drivers/thermal/tegra/soctherm-fuse.c b/drivers/thermal/tegra/soctherm-fuse.c
index 190f952..8d37cd8 100644
--- a/drivers/thermal/tegra/soctherm-fuse.c
+++ b/drivers/thermal/tegra/soctherm-fuse.c
@@ -9,15 +9,12 @@
#include "soctherm.h"
-#define NOMINAL_CALIB_FT 105
#define NOMINAL_CALIB_CP 25
#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff
#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13)
#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13
-#define FUSE_TSENSOR_COMMON 0x180
-
/*
* Tegra210: Layout of bits in FUSE_TSENSOR_COMMON:
* 3 2 1 0
@@ -26,7 +23,7 @@
* | BASE_FT | BASE_CP | SHFT_FT | SHIFT_CP |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
- * Tegra12x, etc:
+ * Tegra124:
* In chips prior to Tegra210, this fuse was incorrectly sized as 26 bits,
* and didn't hold SHIFT_CP in [31:26]. Therefore these missing six bits
* were obtained via the FUSE_SPARE_REALIGNMENT_REG register [5:0].
@@ -44,6 +41,13 @@
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |---------------------------------------------------| SHIFT_CP |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * Tegra114: Layout of bits in FUSE_TSENSOR_COMMON aka FUSE_VSENSOR_CALIB:
+ * 3 2 1 0
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | SHFT_FT | BASE_FT | SHIFT_CP | BASE_CP |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
#define CALIB_COEFFICIENT 1000000LL
@@ -77,7 +81,7 @@ int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
s32 shifted_cp, shifted_ft;
int err;
- err = tegra_fuse_readl(FUSE_TSENSOR_COMMON, &val);
+ err = tegra_fuse_readl(tfuse->fuse_common_reg, &val);
if (err)
return err;
@@ -96,10 +100,12 @@ int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
return err;
}
+ shifted_cp = (val & tfuse->fuse_shift_cp_mask) >>
+ tfuse->fuse_shift_cp_shift;
shifted_cp = sign_extend32(val, 5);
shared->actual_temp_cp = 2 * NOMINAL_CALIB_CP + shifted_cp;
- shared->actual_temp_ft = 2 * NOMINAL_CALIB_FT + shifted_ft;
+ shared->actual_temp_ft = 2 * tfuse->nominal_calib_ft + shifted_ft;
return 0;
}
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 53a5c64..5d26b52 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -31,6 +31,7 @@
#include <linux/reset.h>
#include <linux/thermal.h>
+#include <dt-bindings/thermal/tegra114-soctherm.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#include "../thermal_core.h"
@@ -357,6 +358,12 @@ struct soctherm_oc_irq_chip_data {
static struct soctherm_oc_irq_chip_data soc_irq_cdata;
+/* Ensure that TEGRA114_* and TEGRA124_* counterparts are equal */
+static_assert(TEGRA114_SOCTHERM_SENSOR_CPU == TEGRA124_SOCTHERM_SENSOR_CPU);
+static_assert(TEGRA114_SOCTHERM_SENSOR_MEM == TEGRA124_SOCTHERM_SENSOR_MEM);
+static_assert(TEGRA114_SOCTHERM_SENSOR_GPU == TEGRA124_SOCTHERM_SENSOR_GPU);
+static_assert(TEGRA114_SOCTHERM_SENSOR_PLLX == TEGRA124_SOCTHERM_SENSOR_PLLX);
+
/**
* ccroc_writel() - writes a value to a CCROC register
* @ts: pointer to a struct tegra_soctherm
@@ -2045,6 +2052,12 @@ static void soctherm_init(struct platform_device *pdev)
}
static const struct of_device_id tegra_soctherm_of_match[] = {
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+ {
+ .compatible = "nvidia,tegra114-soctherm",
+ .data = &tegra114_soctherm,
+ },
+#endif
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{
.compatible = "nvidia,tegra124-soctherm",
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
index 70501e7..aa4af92 100644
--- a/drivers/thermal/tegra/soctherm.h
+++ b/drivers/thermal/tegra/soctherm.h
@@ -56,6 +56,9 @@
#define SENSOR_TEMP2_MEM_TEMP_MASK (0xffff << 16)
#define SENSOR_TEMP2_PLLX_TEMP_MASK 0xffff
+#define FUSE_VSENSOR_CALIB 0x08c
+#define FUSE_TSENSOR_COMMON 0x180
+
/**
* struct tegra_tsensor_group - SOC_THERM sensor group data
* @name: short name of the temperature sensor group
@@ -109,9 +112,11 @@ struct tsensor_group_thermtrips {
struct tegra_soctherm_fuse {
u32 fuse_base_cp_mask, fuse_base_cp_shift;
+ u32 fuse_shift_cp_mask, fuse_shift_cp_shift;
u32 fuse_base_ft_mask, fuse_base_ft_shift;
u32 fuse_shift_ft_mask, fuse_shift_ft_shift;
- u32 fuse_spare_realignment;
+ u32 fuse_common_reg, fuse_spare_realignment;
+ u32 nominal_calib_ft;
};
struct tsensor_shared_calib {
@@ -137,6 +142,10 @@ int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
const struct tsensor_shared_calib *shared,
u32 *calib);
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+extern const struct tegra_soctherm_soc tegra114_soctherm;
+#endif
+
#ifdef CONFIG_ARCH_TEGRA_124_SOC
extern const struct tegra_soctherm_soc tegra124_soctherm;
#endif
diff --git a/drivers/thermal/tegra/tegra114-soctherm.c b/drivers/thermal/tegra/tegra114-soctherm.c
new file mode 100644
index 0000000..688104f
--- /dev/null
+++ b/drivers/thermal/tegra/tegra114-soctherm.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2024, Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/thermal/tegra114-soctherm.h>
+
+#include "soctherm.h"
+
+#define TEGRA114_THERMTRIP_ANY_EN_MASK (0x1 << 28)
+#define TEGRA114_THERMTRIP_MEM_EN_MASK (0x1 << 27)
+#define TEGRA114_THERMTRIP_GPU_EN_MASK (0x1 << 26)
+#define TEGRA114_THERMTRIP_CPU_EN_MASK (0x1 << 25)
+#define TEGRA114_THERMTRIP_TSENSE_EN_MASK (0x1 << 24)
+#define TEGRA114_THERMTRIP_GPUMEM_THRESH_MASK (0xff << 16)
+#define TEGRA114_THERMTRIP_CPU_THRESH_MASK (0xff << 8)
+#define TEGRA114_THERMTRIP_TSENSE_THRESH_MASK 0xff
+
+#define TEGRA114_THERMCTL_LVL0_UP_THRESH_MASK (0xff << 17)
+#define TEGRA114_THERMCTL_LVL0_DN_THRESH_MASK (0xff << 9)
+
+#define TEGRA114_THRESH_GRAIN 1000
+#define TEGRA114_BPTT 8
+
+static const struct tegra_tsensor_configuration tegra114_tsensor_config = {
+ .tall = 16300,
+ .tiddq_en = 1,
+ .ten_count = 1,
+ .tsample = 163,
+ .tsample_ate = 655,
+};
+
+static const struct tegra_tsensor_group tegra114_tsensor_group_cpu = {
+ .id = TEGRA114_SOCTHERM_SENSOR_CPU,
+ .name = "cpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
+ .pdiv = 10,
+ .pdiv_ate = 10,
+ .pdiv_mask = SENSOR_PDIV_CPU_MASK,
+ .pllx_hotspot_diff = 6,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+ .thermtrip_any_en_mask = TEGRA114_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA114_THERMTRIP_CPU_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA114_THERMTRIP_CPU_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_CPU_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA114_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA114_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra114_tsensor_group_gpu = {
+ .id = TEGRA114_SOCTHERM_SENSOR_GPU,
+ .name = "gpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
+ .pdiv = 10,
+ .pdiv_ate = 10,
+ .pdiv_mask = SENSOR_PDIV_GPU_MASK,
+ .pllx_hotspot_diff = 6,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+ .thermtrip_any_en_mask = TEGRA114_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA114_THERMTRIP_GPU_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA114_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_GPU_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA114_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA114_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra114_tsensor_group_pll = {
+ .id = TEGRA114_SOCTHERM_SENSOR_PLLX,
+ .name = "pll",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
+ .pdiv = 10,
+ .pdiv_ate = 10,
+ .pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+ .thermtrip_any_en_mask = TEGRA114_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA114_THERMTRIP_TSENSE_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA114_THERMTRIP_TSENSE_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_TSENSE_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+ .thermctl_lvl0_up_thresh_mask = TEGRA114_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA114_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group tegra114_tsensor_group_mem = {
+ .id = TEGRA114_SOCTHERM_SENSOR_MEM,
+ .name = "mem",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
+ .pdiv = 10,
+ .pdiv_ate = 10,
+ .pdiv_mask = SENSOR_PDIV_MEM_MASK,
+ .pllx_hotspot_diff = 0,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+ .thermtrip_any_en_mask = TEGRA114_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA114_THERMTRIP_MEM_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA114_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_isr_mask = THERM_IRQ_MEM_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+ .thermctl_lvl0_up_thresh_mask = TEGRA114_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA114_THERMCTL_LVL0_DN_THRESH_MASK,
+};
+
+static const struct tegra_tsensor_group *tegra114_tsensor_groups[] = {
+ &tegra114_tsensor_group_cpu,
+ &tegra114_tsensor_group_gpu,
+ &tegra114_tsensor_group_pll,
+ &tegra114_tsensor_group_mem,
+};
+
+static const struct tegra_tsensor tegra114_tsensors[] = {
+ {
+ .name = "cpu0",
+ .base = 0xc0,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x098,
+ .fuse_corr_alpha = 1196400,
+ .fuse_corr_beta = -13600000,
+ .group = &tegra114_tsensor_group_cpu,
+ }, {
+ .name = "cpu1",
+ .base = 0xe0,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x084,
+ .fuse_corr_alpha = 1196400,
+ .fuse_corr_beta = -13600000,
+ .group = &tegra114_tsensor_group_cpu,
+ }, {
+ .name = "cpu2",
+ .base = 0x100,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x088,
+ .fuse_corr_alpha = 1196400,
+ .fuse_corr_beta = -13600000,
+ .group = &tegra114_tsensor_group_cpu,
+ }, {
+ .name = "cpu3",
+ .base = 0x120,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x12c,
+ .fuse_corr_alpha = 1196400,
+ .fuse_corr_beta = -13600000,
+ .group = &tegra114_tsensor_group_cpu,
+ }, {
+ .name = "mem0",
+ .base = 0x140,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x158,
+ .fuse_corr_alpha = 1000000,
+ .fuse_corr_beta = 0,
+ .group = &tegra114_tsensor_group_mem,
+ }, {
+ .name = "mem1",
+ .base = 0x160,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x15c,
+ .fuse_corr_alpha = 1000000,
+ .fuse_corr_beta = 0,
+ .group = &tegra114_tsensor_group_mem,
+ }, {
+ .name = "gpu",
+ .base = 0x180,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x154,
+ .fuse_corr_alpha = 1124500,
+ .fuse_corr_beta = -9793100,
+ .group = &tegra114_tsensor_group_gpu,
+ }, {
+ .name = "pllx",
+ .base = 0x1a0,
+ .config = &tegra114_tsensor_config,
+ .calib_fuse_offset = 0x160,
+ .fuse_corr_alpha = 1224200,
+ .fuse_corr_beta = -14665000,
+ .group = &tegra114_tsensor_group_pll,
+ },
+};
+
+static const struct tegra_soctherm_fuse tegra114_soctherm_fuse = {
+ .fuse_base_cp_mask = 0x3ff,
+ .fuse_base_cp_shift = 0,
+ .fuse_shift_cp_mask = 0x3f << 10,
+ .fuse_shift_cp_shift = 10,
+ .fuse_base_ft_mask = 0x7ff << 16,
+ .fuse_base_ft_shift = 16,
+ .fuse_shift_ft_mask = 0x1f << 27,
+ .fuse_shift_ft_shift = 27,
+ .fuse_common_reg = FUSE_VSENSOR_CALIB,
+ .fuse_spare_realignment = 0,
+ .nominal_calib_ft = 90,
+};
+
+const struct tegra_soctherm_soc tegra114_soctherm = {
+ .tsensors = tegra114_tsensors,
+ .num_tsensors = ARRAY_SIZE(tegra114_tsensors),
+ .ttgs = tegra114_tsensor_groups,
+ .num_ttgs = ARRAY_SIZE(tegra114_tsensor_groups),
+ .tfuse = &tegra114_soctherm_fuse,
+ .thresh_grain = TEGRA114_THRESH_GRAIN,
+ .bptt = TEGRA114_BPTT,
+ .use_ccroc = false,
+};
diff --git a/drivers/thermal/tegra/tegra124-soctherm.c b/drivers/thermal/tegra/tegra124-soctherm.c
index 20ad27f..d86acff 100644
--- a/drivers/thermal/tegra/tegra124-soctherm.c
+++ b/drivers/thermal/tegra/tegra124-soctherm.c
@@ -200,11 +200,15 @@ static const struct tegra_tsensor tegra124_tsensors[] = {
static const struct tegra_soctherm_fuse tegra124_soctherm_fuse = {
.fuse_base_cp_mask = 0x3ff,
.fuse_base_cp_shift = 0,
+ .fuse_shift_cp_mask = 0x3f,
+ .fuse_shift_cp_shift = 0,
.fuse_base_ft_mask = 0x7ff << 10,
.fuse_base_ft_shift = 10,
.fuse_shift_ft_mask = 0x1f << 21,
.fuse_shift_ft_shift = 21,
+ .fuse_common_reg = FUSE_TSENSOR_COMMON,
.fuse_spare_realignment = 0x1fc,
+ .nominal_calib_ft = 105,
};
const struct tegra_soctherm_soc tegra124_soctherm = {
diff --git a/drivers/thermal/tegra/tegra132-soctherm.c b/drivers/thermal/tegra/tegra132-soctherm.c
index b76308f..64c0363 100644
--- a/drivers/thermal/tegra/tegra132-soctherm.c
+++ b/drivers/thermal/tegra/tegra132-soctherm.c
@@ -200,11 +200,15 @@ static struct tegra_tsensor tegra132_tsensors[] = {
static const struct tegra_soctherm_fuse tegra132_soctherm_fuse = {
.fuse_base_cp_mask = 0x3ff,
.fuse_base_cp_shift = 0,
+ .fuse_shift_cp_mask = 0x3f,
+ .fuse_shift_cp_shift = 0,
.fuse_base_ft_mask = 0x7ff << 10,
.fuse_base_ft_shift = 10,
.fuse_shift_ft_mask = 0x1f << 21,
.fuse_shift_ft_shift = 21,
+ .fuse_common_reg = FUSE_TSENSOR_COMMON,
.fuse_spare_realignment = 0x1fc,
+ .nominal_calib_ft = 105,
};
const struct tegra_soctherm_soc tegra132_soctherm = {
diff --git a/drivers/thermal/tegra/tegra210-soctherm.c b/drivers/thermal/tegra/tegra210-soctherm.c
index d0ff793..f6e1493f 100644
--- a/drivers/thermal/tegra/tegra210-soctherm.c
+++ b/drivers/thermal/tegra/tegra210-soctherm.c
@@ -201,11 +201,15 @@ static const struct tegra_tsensor tegra210_tsensors[] = {
static const struct tegra_soctherm_fuse tegra210_soctherm_fuse = {
.fuse_base_cp_mask = 0x3ff << 11,
.fuse_base_cp_shift = 11,
+ .fuse_shift_cp_mask = 0x3f,
+ .fuse_shift_cp_shift = 0,
.fuse_base_ft_mask = 0x7ff << 21,
.fuse_base_ft_shift = 21,
.fuse_shift_ft_mask = 0x1f << 6,
.fuse_shift_ft_shift = 6,
+ .fuse_common_reg = FUSE_TSENSOR_COMMON,
.fuse_spare_realignment = 0,
+ .nominal_calib_ft = 105,
};
static struct tsensor_group_thermtrips tegra210_tsensor_thermtrips[] = {
diff --git a/drivers/thermal/testing/zone.c b/drivers/thermal/testing/zone.c
index 4257d81..c12c405 100644
--- a/drivers/thermal/testing/zone.c
+++ b/drivers/thermal/testing/zone.c
@@ -184,15 +184,14 @@ static void tt_add_tz_work_fn(struct work_struct *work)
int tt_add_tz(void)
{
- struct tt_thermal_zone *tt_zone __free(kfree);
- struct tt_work *tt_work __free(kfree) = NULL;
int ret;
- tt_zone = kzalloc(sizeof(*tt_zone), GFP_KERNEL);
+ struct tt_thermal_zone *tt_zone __free(kfree) = kzalloc(sizeof(*tt_zone),
+ GFP_KERNEL);
if (!tt_zone)
return -ENOMEM;
- tt_work = kzalloc(sizeof(*tt_work), GFP_KERNEL);
+ struct tt_work *tt_work __free(kfree) = kzalloc(sizeof(*tt_work), GFP_KERNEL);
if (!tt_work)
return -ENOMEM;
@@ -237,7 +236,6 @@ static void tt_zone_unregister_tz(struct tt_thermal_zone *tt_zone)
int tt_del_tz(const char *arg)
{
- struct tt_work *tt_work __free(kfree) = NULL;
struct tt_thermal_zone *tt_zone, *aux;
int ret;
int id;
@@ -246,7 +244,7 @@ int tt_del_tz(const char *arg)
if (ret != 1)
return -EINVAL;
- tt_work = kzalloc(sizeof(*tt_work), GFP_KERNEL);
+ struct tt_work *tt_work __free(kfree) = kzalloc(sizeof(*tt_work), GFP_KERNEL);
if (!tt_work)
return -ENOMEM;
@@ -330,20 +328,17 @@ static void tt_zone_add_trip_work_fn(struct work_struct *work)
int tt_zone_add_trip(const char *arg)
{
- struct tt_thermal_zone *tt_zone __free(put_tt_zone) = NULL;
- struct tt_trip *tt_trip __free(kfree) = NULL;
- struct tt_work *tt_work __free(kfree);
int id;
- tt_work = kzalloc(sizeof(*tt_work), GFP_KERNEL);
+ struct tt_work *tt_work __free(kfree) = kzalloc(sizeof(*tt_work), GFP_KERNEL);
if (!tt_work)
return -ENOMEM;
- tt_trip = kzalloc(sizeof(*tt_trip), GFP_KERNEL);
+ struct tt_trip *tt_trip __free(kfree) = kzalloc(sizeof(*tt_trip), GFP_KERNEL);
if (!tt_trip)
return -ENOMEM;
- tt_zone = tt_get_tt_zone(arg);
+ struct tt_thermal_zone *tt_zone __free(put_tt_zone) = tt_get_tt_zone(arg);
if (IS_ERR(tt_zone))
return PTR_ERR(tt_zone);
@@ -387,7 +382,6 @@ static const struct thermal_zone_device_ops tt_zone_ops = {
static int tt_zone_register_tz(struct tt_thermal_zone *tt_zone)
{
- struct thermal_trip *trips __free(kfree) = NULL;
struct thermal_zone_device *tz;
struct tt_trip *tt_trip;
int i;
@@ -397,7 +391,8 @@ static int tt_zone_register_tz(struct tt_thermal_zone *tt_zone)
if (tt_zone->tz)
return -EINVAL;
- trips = kcalloc(tt_zone->num_trips, sizeof(*trips), GFP_KERNEL);
+ struct thermal_trip *trips __free(kfree) = kcalloc(tt_zone->num_trips,
+ sizeof(*trips), GFP_KERNEL);
if (!trips)
return -ENOMEM;
@@ -421,9 +416,7 @@ static int tt_zone_register_tz(struct tt_thermal_zone *tt_zone)
int tt_zone_reg(const char *arg)
{
- struct tt_thermal_zone *tt_zone __free(put_tt_zone);
-
- tt_zone = tt_get_tt_zone(arg);
+ struct tt_thermal_zone *tt_zone __free(put_tt_zone) = tt_get_tt_zone(arg);
if (IS_ERR(tt_zone))
return PTR_ERR(tt_zone);
@@ -432,9 +425,7 @@ int tt_zone_reg(const char *arg)
int tt_zone_unreg(const char *arg)
{
- struct tt_thermal_zone *tt_zone __free(put_tt_zone);
-
- tt_zone = tt_get_tt_zone(arg);
+ struct tt_thermal_zone *tt_zone __free(put_tt_zone) = tt_get_tt_zone(arg);
if (IS_ERR(tt_zone))
return PTR_ERR(tt_zone);
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index ee3d0aa..7c84458 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -7,6 +7,7 @@
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*/
#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -73,6 +74,58 @@ static const struct thermal_zone_device_ops gadc_thermal_ops = {
.get_temp = gadc_thermal_get_temp,
};
+static const struct iio_chan_spec gadc_thermal_iio_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }
+};
+
+static int gadc_thermal_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct gadc_thermal_info *gtinfo = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = gadc_thermal_get_temp(gtinfo->tz_dev, val);
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info gadc_thermal_iio_info = {
+ .read_raw = gadc_thermal_read_raw,
+};
+
+static int gadc_iio_register(struct device *dev, struct gadc_thermal_info *gti)
+{
+ struct gadc_thermal_info *gtinfo;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*gtinfo));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ gtinfo = iio_priv(indio_dev);
+ memcpy(gtinfo, gti, sizeof(*gtinfo));
+
+ indio_dev->name = dev_name(dev);
+ indio_dev->info = &gadc_thermal_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = gadc_thermal_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(gadc_thermal_iio_channels);
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
static int gadc_thermal_read_linear_lookup_table(struct device *dev,
struct gadc_thermal_info *gti)
{
@@ -153,7 +206,7 @@ static int gadc_thermal_probe(struct platform_device *pdev)
devm_thermal_add_hwmon_sysfs(dev, gti->tz_dev);
- return 0;
+ return gadc_iio_register(&pdev->dev, gti);
}
static const struct of_device_id of_adc_thermal_match[] = {
diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index 0ecccd4..64cc3ab 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -96,7 +96,7 @@ thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz)
mutex_lock(&thermal_hwmon_list_lock);
list_for_each_entry(hwmon, &thermal_hwmon_list, node) {
- strcpy(type, tz->type);
+ strscpy(type, tz->type);
strreplace(type, '-', '_');
if (!strcmp(hwmon->type, type)) {
mutex_unlock(&thermal_hwmon_list_lock);
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 53c98f5..a2db36d 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -173,8 +173,10 @@ struct acpi_exception_info {
#define AE_AML_TARGET_TYPE EXCEP_AML (0x0023)
#define AE_AML_PROTOCOL EXCEP_AML (0x0024)
#define AE_AML_BUFFER_LENGTH EXCEP_AML (0x0025)
+#define AE_AML_TOO_FEW_ARGUMENTS EXCEP_AML (0x0026)
+#define AE_AML_TOO_MANY_ARGUMENTS EXCEP_AML (0x0027)
-#define AE_CODE_AML_MAX 0x0025
+#define AE_CODE_AML_MAX 0x0027
/*
* Internal exceptions used for control
@@ -353,7 +355,11 @@ static const struct acpi_exception_info acpi_gbl_exception_names_aml[] = {
"A target operand of an incorrect type was encountered"),
EXCEP_TXT("AE_AML_PROTOCOL", "Violation of a fixed ACPI protocol"),
EXCEP_TXT("AE_AML_BUFFER_LENGTH",
- "The length of the buffer is invalid/incorrect")
+ "The length of the buffer is invalid/incorrect"),
+ EXCEP_TXT("AE_AML_TOO_FEW_ARGUMENTS",
+ "There are fewer than expected method arguments"),
+ EXCEP_TXT("AE_AML_TOO_MANY_ARGUMENTS",
+ "There are too many arguments for this method")
};
static const struct acpi_exception_info acpi_gbl_exception_names_ctrl[] = {
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index b49396a..e65a2af 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -12,7 +12,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20250404
+#define ACPI_CA_VERSION 0x20250807
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
@@ -214,6 +214,12 @@ ACPI_INIT_GLOBAL(u8, acpi_gbl_osi_data, 0);
ACPI_INIT_GLOBAL(u8, acpi_gbl_reduced_hardware, FALSE);
/*
+ * ACPI Global Lock is mainly used for systems with SMM, so no-SMM systems
+ * (such as loong_arch) may not have and not use Global Lock.
+ */
+ACPI_INIT_GLOBAL(u8, acpi_gbl_use_global_lock, TRUE);
+
+/*
* Maximum timeout for While() loop iterations before forced method abort.
* This mechanism is intended to prevent infinite loops during interpreter
* execution within a host kernel.
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 243097a..8a67d4e 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -73,7 +73,7 @@ struct acpi_table_header {
char oem_id[ACPI_OEM_ID_SIZE] ACPI_NONSTRING; /* ASCII OEM identification */
char oem_table_id[ACPI_OEM_TABLE_ID_SIZE] ACPI_NONSTRING; /* ASCII OEM table identification */
u32 oem_revision; /* OEM revision number */
- char asl_compiler_id[ACPI_NAMESEG_SIZE]; /* ASCII ASL compiler vendor ID */
+ char asl_compiler_id[ACPI_NAMESEG_SIZE] ACPI_NONSTRING; /* ASCII ASL compiler vendor ID */
u32 asl_compiler_revision; /* ASL compiler version */
};
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 99fd158..0b4c332 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -565,6 +565,7 @@ struct acpi_cedt_cfmws_target_element {
#define ACPI_CEDT_CFMWS_RESTRICT_VOLATILE (1<<2)
#define ACPI_CEDT_CFMWS_RESTRICT_PMEM (1<<3)
#define ACPI_CEDT_CFMWS_RESTRICT_FIXED (1<<4)
+#define ACPI_CEDT_CFMWS_RESTRICT_BI (1<<5)
/* 2: CXL XOR Interleave Math Structure */
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 048f5f4..f726bce 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -57,6 +57,7 @@
#define ACPI_SIG_SDEI "SDEI" /* Software Delegated Exception Interface Table */
#define ACPI_SIG_SDEV "SDEV" /* Secure Devices table */
#define ACPI_SIG_SVKL "SVKL" /* Storage Volume Key Location Table */
+#define ACPI_SIG_SWFT "SWFT" /* SoundWire File Table */
#define ACPI_SIG_TDEL "TDEL" /* TD Event Log Table */
/*
@@ -3479,6 +3480,26 @@ enum acpi_svkl_format {
};
/*******************************************************************************
+ * SWFT - SoundWire File Table
+ *
+ * Conforms to "Discovery and Configuration (DisCo) Specification for SoundWire"
+ * Version 2.1, 2 October 2023
+ *
+ ******************************************************************************/
+struct acpi_sw_file {
+ u16 vendor_id;
+ u32 file_id;
+ u16 file_version;
+ u32 file_length;
+ u8 data[];
+};
+
+struct acpi_table_swft {
+ struct acpi_table_header header;
+ struct acpi_sw_file files[];
+};
+
+/*******************************************************************************
*
* TDEL - TD-Event Log
* From: "Guest-Host-Communication Interface (GHCI) for Intel
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index d0eccbd..7146a8e 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -417,32 +417,15 @@ static inline void acpi_processor_throttling_init(void) {}
#endif /* CONFIG_ACPI_CPU_FREQ_PSS */
/* in processor_idle.c */
-extern struct cpuidle_driver acpi_idle_driver;
#ifdef CONFIG_ACPI_PROCESSOR_IDLE
-int acpi_processor_power_init(struct acpi_processor *pr);
-int acpi_processor_power_exit(struct acpi_processor *pr);
+void acpi_processor_power_init(struct acpi_processor *pr);
+void acpi_processor_power_exit(struct acpi_processor *pr);
int acpi_processor_power_state_has_changed(struct acpi_processor *pr);
int acpi_processor_hotplug(struct acpi_processor *pr);
-#else
-static inline int acpi_processor_power_init(struct acpi_processor *pr)
-{
- return -ENODEV;
-}
-
-static inline int acpi_processor_power_exit(struct acpi_processor *pr)
-{
- return -ENODEV;
-}
-
-static inline int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
-{
- return -ENODEV;
-}
-
-static inline int acpi_processor_hotplug(struct acpi_processor *pr)
-{
- return -ENODEV;
-}
+void acpi_processor_register_idle_driver(void);
+void acpi_processor_unregister_idle_driver(void);
+int acpi_processor_ffh_lpi_probe(unsigned int cpu);
+int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi);
#endif /* CONFIG_ACPI_PROCESSOR_IDLE */
/* in processor_thermal.c */
@@ -465,11 +448,6 @@ static inline void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy)
}
#endif /* CONFIG_CPU_FREQ */
-#ifdef CONFIG_ACPI_PROCESSOR_IDLE
-extern int acpi_processor_ffh_lpi_probe(unsigned int cpu);
-extern int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi);
-#endif
-
void acpi_processor_init_invariance_cppc(void);
#endif
diff --git a/include/dt-bindings/clock/qcom,apss-ipq.h b/include/dt-bindings/clock/qcom,apss-ipq.h
index 77b6e05..0bb41e5 100644
--- a/include/dt-bindings/clock/qcom,apss-ipq.h
+++ b/include/dt-bindings/clock/qcom,apss-ipq.h
@@ -8,5 +8,11 @@
#define APCS_ALIAS0_CLK_SRC 0
#define APCS_ALIAS0_CORE_CLK 1
+#define APSS_PLL_EARLY 2
+#define APSS_SILVER_CLK_SRC 3
+#define APSS_SILVER_CORE_CLK 4
+#define L3_PLL 5
+#define L3_CLK_SRC 6
+#define L3_CORE_CLK 7
#endif
diff --git a/include/dt-bindings/clock/qcom,dispcc-sc7280.h b/include/dt-bindings/clock/qcom,dispcc-sc7280.h
index a4a692c..9f113f3 100644
--- a/include/dt-bindings/clock/qcom,dispcc-sc7280.h
+++ b/include/dt-bindings/clock/qcom,dispcc-sc7280.h
@@ -52,4 +52,8 @@
/* DISP_CC power domains */
#define DISP_CC_MDSS_CORE_GDSC 0
+/* DISPCC resets */
+#define DISP_CC_MDSS_CORE_BCR 0
+#define DISP_CC_MDSS_RSCC_BCR 1
+
#endif
diff --git a/include/dt-bindings/clock/sun55i-a523-ccu.h b/include/dt-bindings/clock/sun55i-a523-ccu.h
index c8259ac5..54808fc 100644
--- a/include/dt-bindings/clock/sun55i-a523-ccu.h
+++ b/include/dt-bindings/clock/sun55i-a523-ccu.h
@@ -185,5 +185,6 @@
#define CLK_FANOUT0 176
#define CLK_FANOUT1 177
#define CLK_FANOUT2 178
+#define CLK_NPU 179
#endif /* _DT_BINDINGS_CLK_SUN55I_A523_CCU_H_ */
diff --git a/include/dt-bindings/clock/sun55i-a523-mcu-ccu.h b/include/dt-bindings/clock/sun55i-a523-mcu-ccu.h
new file mode 100644
index 0000000..6efc6bc
--- /dev/null
+++ b/include/dt-bindings/clock/sun55i-a523-mcu-ccu.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN55I_A523_MCU_CCU_H_
+#define _DT_BINDINGS_CLK_SUN55I_A523_MCU_CCU_H_
+
+#define CLK_MCU_PLL_AUDIO1 0
+#define CLK_MCU_PLL_AUDIO1_DIV2 1
+#define CLK_MCU_PLL_AUDIO1_DIV5 2
+#define CLK_MCU_AUDIO_OUT 3
+#define CLK_MCU_DSP 4
+#define CLK_MCU_I2S0 5
+#define CLK_MCU_I2S1 6
+#define CLK_MCU_I2S2 7
+#define CLK_MCU_I2S3 8
+#define CLK_MCU_I2S3_ASRC 9
+#define CLK_BUS_MCU_I2S0 10
+#define CLK_BUS_MCU_I2S1 11
+#define CLK_BUS_MCU_I2S2 12
+#define CLK_BUS_MCU_I2S3 13
+#define CLK_MCU_SPDIF_TX 14
+#define CLK_MCU_SPDIF_RX 15
+#define CLK_BUS_MCU_SPDIF 16
+#define CLK_MCU_DMIC 17
+#define CLK_BUS_MCU_DMIC 18
+#define CLK_MCU_AUDIO_CODEC_DAC 19
+#define CLK_MCU_AUDIO_CODEC_ADC 20
+#define CLK_BUS_MCU_AUDIO_CODEC 21
+#define CLK_BUS_MCU_DSP_MSGBOX 22
+#define CLK_BUS_MCU_DSP_CFG 23
+#define CLK_BUS_MCU_NPU_HCLK 24
+#define CLK_BUS_MCU_NPU_ACLK 25
+#define CLK_MCU_TIMER0 26
+#define CLK_MCU_TIMER1 27
+#define CLK_MCU_TIMER2 28
+#define CLK_MCU_TIMER3 29
+#define CLK_MCU_TIMER4 30
+#define CLK_MCU_TIMER5 31
+#define CLK_BUS_MCU_TIMER 32
+#define CLK_BUS_MCU_DMA 33
+#define CLK_MCU_TZMA0 34
+#define CLK_MCU_TZMA1 35
+#define CLK_BUS_MCU_PUBSRAM 36
+#define CLK_MCU_MBUS_DMA 37
+#define CLK_MCU_MBUS 38
+#define CLK_MCU_RISCV 39
+#define CLK_BUS_MCU_RISCV_CFG 40
+#define CLK_BUS_MCU_RISCV_MSGBOX 41
+#define CLK_MCU_PWM0 42
+#define CLK_BUS_MCU_PWM0 43
+
+#endif /* _DT_BINDINGS_CLK_SUN55I_A523_MCU_CCU_H_ */
diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h
index f193663..763b81f 100644
--- a/include/dt-bindings/clock/tegra30-car.h
+++ b/include/dt-bindings/clock/tegra30-car.h
@@ -271,6 +271,7 @@
#define TEGRA30_CLK_AUDIO3_MUX 306
#define TEGRA30_CLK_AUDIO4_MUX 307
#define TEGRA30_CLK_SPDIF_MUX 308
-#define TEGRA30_CLK_CLK_MAX 309
+#define TEGRA30_CLK_CSIA_PAD 309
+#define TEGRA30_CLK_CSIB_PAD 310
#endif /* _DT_BINDINGS_CLOCK_TEGRA30_CAR_H */
diff --git a/include/dt-bindings/interconnect/qcom,ipq5424.h b/include/dt-bindings/interconnect/qcom,ipq5424.h
index a770356..afd7e06 100644
--- a/include/dt-bindings/interconnect/qcom,ipq5424.h
+++ b/include/dt-bindings/interconnect/qcom,ipq5424.h
@@ -21,4 +21,7 @@
#define MASTER_CNOC_USB 16
#define SLAVE_CNOC_USB 17
+#define MASTER_CPU 0
+#define SLAVE_L3 1
+
#endif /* INTERCONNECT_QCOM_IPQ5424_H */
diff --git a/include/dt-bindings/reset/nvidia,tegra114-car.h b/include/dt-bindings/reset/nvidia,tegra114-car.h
new file mode 100644
index 0000000..9b8c320
--- /dev/null
+++ b/include/dt-bindings/reset/nvidia,tegra114-car.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * This header provides Tegra114-specific constants for binding
+ * nvidia,tegra114-car.
+ */
+
+#ifndef _DT_BINDINGS_RESET_NVIDIA_TEGRA114_CAR_H
+#define _DT_BINDINGS_RESET_NVIDIA_TEGRA114_CAR_H
+
+#define TEGRA114_RESET(x) (5 * 32 + (x))
+#define TEGRA114_RST_DFLL_DVCO TEGRA114_RESET(0)
+
+#endif /* _DT_BINDINGS_RESET_NVIDIA_TEGRA114_CAR_H */
diff --git a/include/dt-bindings/reset/sun55i-a523-mcu-ccu.h b/include/dt-bindings/reset/sun55i-a523-mcu-ccu.h
new file mode 100644
index 0000000..a89a0b4
--- /dev/null
+++ b/include/dt-bindings/reset/sun55i-a523-mcu-ccu.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN55I_A523_MCU_CCU_H_
+#define _DT_BINDINGS_RST_SUN55I_A523_MCU_CCU_H_
+
+#define RST_BUS_MCU_I2S0 0
+#define RST_BUS_MCU_I2S1 1
+#define RST_BUS_MCU_I2S2 2
+#define RST_BUS_MCU_I2S3 3
+#define RST_BUS_MCU_SPDIF 4
+#define RST_BUS_MCU_DMIC 5
+#define RST_BUS_MCU_AUDIO_CODEC 6
+#define RST_BUS_MCU_DSP_MSGBOX 7
+#define RST_BUS_MCU_DSP_CFG 8
+#define RST_BUS_MCU_NPU 9
+#define RST_BUS_MCU_TIMER 10
+#define RST_BUS_MCU_DSP_DEBUG 11
+#define RST_BUS_MCU_DSP 12
+#define RST_BUS_MCU_DMA 13
+#define RST_BUS_MCU_PUBSRAM 14
+#define RST_BUS_MCU_RISCV_CFG 15
+#define RST_BUS_MCU_RISCV_DEBUG 16
+#define RST_BUS_MCU_RISCV_CORE 17
+#define RST_BUS_MCU_RISCV_MSGBOX 18
+#define RST_BUS_MCU_PWM0 19
+
+#endif /* _DT_BINDINGS_RST_SUN55I_A523_MCU_CCU_H_ */
diff --git a/include/dt-bindings/thermal/tegra114-soctherm.h b/include/dt-bindings/thermal/tegra114-soctherm.h
new file mode 100644
index 0000000..b766a61
--- /dev/null
+++ b/include/dt-bindings/thermal/tegra114-soctherm.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * This header provides constants for binding nvidia,tegra114-soctherm.
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_TEGRA114_SOCTHERM_H
+#define _DT_BINDINGS_THERMAL_TEGRA114_SOCTHERM_H
+
+#define TEGRA114_SOCTHERM_SENSOR_CPU 0
+#define TEGRA114_SOCTHERM_SENSOR_MEM 1
+#define TEGRA114_SOCTHERM_SENSOR_GPU 2
+#define TEGRA114_SOCTHERM_SENSOR_PLLX 3
+
+#define TEGRA114_SOCTHERM_THROT_LEVEL_NONE 0
+#define TEGRA114_SOCTHERM_THROT_LEVEL_LOW 1
+#define TEGRA114_SOCTHERM_THROT_LEVEL_MED 2
+#define TEGRA114_SOCTHERM_THROT_LEVEL_HIGH 3
+
+#endif
diff --git a/include/linux/of.h b/include/linux/of.h
index a62154a..5e2c6ed 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -550,6 +550,13 @@ static inline struct device_node *of_get_next_child(
return NULL;
}
+static inline struct device_node *of_get_next_child_with_prefix(
+ const struct device_node *node, struct device_node *prev,
+ const char *prefix)
+{
+ return NULL;
+}
+
static inline struct device_node *of_get_next_available_child(
const struct device_node *node, struct device_node *prev)
{
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index a480063..1db8543 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -55,7 +55,6 @@ extern struct irq_domain *of_msi_map_get_device_domain(struct device *dev,
u32 bus_token);
extern void of_msi_configure(struct device *dev, const struct device_node *np);
extern u32 of_msi_xlate(struct device *dev, struct device_node **msi_np, u32 id_in);
-u32 of_msi_map_id(struct device *dev, struct device_node *msi_np, u32 id_in);
#else
static inline void of_irq_init(const struct of_device_id *matches)
{
@@ -105,11 +104,6 @@ static inline u32 of_msi_xlate(struct device *dev, struct device_node **msi_np,
{
return id_in;
}
-static inline u32 of_msi_map_id(struct device *dev,
- struct device_node *msi_np, u32 id_in)
-{
- return id_in;
-}
#endif
#if defined(CONFIG_OF_IRQ) || defined(CONFIG_SPARC)
diff --git a/scripts/Makefile.dtbs b/scripts/Makefile.dtbs
index 43d712a..9e2c72d 100644
--- a/scripts/Makefile.dtbs
+++ b/scripts/Makefile.dtbs
@@ -97,6 +97,7 @@
-Wno-avoid_unnecessary_addr_size \
-Wno-alias_paths \
-Wno-graph_child_address \
+ -Wno-interrupt_map \
-Wno-simple_bus_reg
else
DTC_FLAGS += -Wunique_unit_address_if_enabled
diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
index 6e06aea..7e3fed5 100644
--- a/scripts/dtc/checks.c
+++ b/scripts/dtc/checks.c
@@ -1024,7 +1024,7 @@ static void check_i2c_bus_bridge(struct check *c, struct dt_info *dti, struct no
} else if (strprefixeq(node->name, node->basenamelen, "i2c")) {
struct node *child;
for_each_child(node, child) {
- if (strprefixeq(child->name, node->basenamelen, "i2c-bus"))
+ if (strprefixeq(child->name, child->basenamelen, "i2c-bus"))
return;
}
node->bus = &i2c_bus;
@@ -1217,9 +1217,7 @@ WARNING(avoid_default_addr_size, check_avoid_default_addr_size, NULL,
static void check_avoid_unnecessary_addr_size(struct check *c, struct dt_info *dti,
struct node *node)
{
- struct property *prop;
struct node *child;
- bool has_reg = false;
if (!node->parent || node->addr_cells < 0 || node->size_cells < 0)
return;
@@ -1228,13 +1226,18 @@ static void check_avoid_unnecessary_addr_size(struct check *c, struct dt_info *d
return;
for_each_child(node, child) {
- prop = get_property(child, "reg");
- if (prop)
- has_reg = true;
+ /*
+ * Even if the child devices' address space is not mapped into
+ * the parent bus (no 'ranges' property on node), children can
+ * still have registers on a local bus, or map local addresses
+ * to another subordinate address space. The properties on the
+ * child nodes then make #address-cells/#size-cells necessary:
+ */
+ if (get_property(child, "reg") || get_property(child, "ranges"))
+ return;
}
- if (!has_reg)
- FAIL(c, dti, node, "unnecessary #address-cells/#size-cells without \"ranges\", \"dma-ranges\" or child \"reg\" property");
+ FAIL(c, dti, node, "unnecessary #address-cells/#size-cells without \"ranges\", \"dma-ranges\" or child \"reg\" or \"ranges\" property");
}
WARNING(avoid_unnecessary_addr_size, check_avoid_unnecessary_addr_size, NULL, &avoid_default_addr_size);
@@ -1673,6 +1676,10 @@ static void check_interrupt_map(struct check *c,
cellprop = get_property(provider_node, "#address-cells");
if (cellprop)
parent_cellsize += propval_cell(cellprop);
+ else
+ FAIL_PROP(c, dti, node, irq_map_prop,
+ "Missing property '#address-cells' in node %s, using 0 as fallback",
+ provider_node->fullpath);
cell += 1 + parent_cellsize;
if (cell > map_cells)
diff --git a/scripts/dtc/data.c b/scripts/dtc/data.c
index 1473423..5b25aa0 100644
--- a/scripts/dtc/data.c
+++ b/scripts/dtc/data.c
@@ -228,11 +228,7 @@ struct data data_add_marker(struct data d, enum markertype type, char *ref)
{
struct marker *m;
- m = xmalloc(sizeof(*m));
- m->offset = d.len;
- m->type = type;
- m->ref = ref;
- m->next = NULL;
+ m = alloc_marker(d.len, type, ref);
return data_append_markers(d, m);
}
@@ -254,3 +250,44 @@ bool data_is_one_string(struct data d)
return true;
}
+
+struct data data_insert_data(struct data d, struct marker *m, struct data old)
+{
+ unsigned int offset = m->offset;
+ struct marker *next = m->next;
+ struct marker *marker;
+ struct data new_data;
+ char *ref;
+
+ new_data = data_insert_at_marker(d, m, old.val, old.len);
+
+ /* Copy all markers from old value */
+ marker = old.markers;
+ for_each_marker(marker) {
+ ref = NULL;
+
+ if (marker->ref)
+ ref = xstrdup(marker->ref);
+
+ m->next = alloc_marker(marker->offset + offset, marker->type,
+ ref);
+ m = m->next;
+ }
+ m->next = next;
+
+ return new_data;
+}
+
+struct marker *alloc_marker(unsigned int offset, enum markertype type,
+ char *ref)
+{
+ struct marker *m;
+
+ m = xmalloc(sizeof(*m));
+ m->offset = offset;
+ m->type = type;
+ m->ref = ref;
+ m->next = NULL;
+
+ return m;
+}
diff --git a/scripts/dtc/dt_to_config b/scripts/dtc/dt_to_config
index 299d1c2..70d6d5f 100755
--- a/scripts/dtc/dt_to_config
+++ b/scripts/dtc/dt_to_config
@@ -51,10 +51,10 @@
"compatible is white listed",
"matching driver and/or kernel config is hard coded",
"kernel config hard coded in Makefile",
- "one or more kernel config file options is not set",
- "one or more kernel config file options is set to 'm'",
- "one or more kernel config file options is set to 'y'",
- "one of more kernel config file options fails to have correct value"
+ "one or more kernel config file options are not set",
+ "one or more kernel config file options are set to 'm'",
+ "one or more kernel config file options are set to 'y'",
+ "one or more kernel config file options fail to have correct value"
);
diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l
index de60a70..15d585c 100644
--- a/scripts/dtc/dtc-lexer.l
+++ b/scripts/dtc/dtc-lexer.l
@@ -151,6 +151,21 @@
return DT_LABEL;
}
+<V1>{LABEL} {
+ /* Missed includes or macro definitions while
+ * preprocessing can lead to unexpected identifiers in
+ * the input. Report a slightly more informative error
+ * in this case */
+
+ lexical_error("Unexpected '%s'", yytext);
+
+ /* Treat it as a literal which often generates further
+ * useful error messages */
+
+ yylval.integer = 0;
+ return DT_LITERAL;
+ }
+
<V1>([0-9]+|0[xX][0-9a-fA-F]+)(U|L|UL|LL|ULL)? {
char *e;
DPRINT("Integer Literal: '%s'\n", yytext);
diff --git a/scripts/dtc/dtc.c b/scripts/dtc/dtc.c
index 0655c2e..b3445b7 100644
--- a/scripts/dtc/dtc.c
+++ b/scripts/dtc/dtc.c
@@ -15,7 +15,7 @@ int quiet; /* Level of quietness */
unsigned int reservenum;/* Number of memory reservation slots */
int minsize; /* Minimum blob size */
int padsize; /* Additional padding to blob */
-int alignsize; /* Additional padding to blob accroding to the alignsize */
+int alignsize; /* Additional padding to blob according to the alignsize */
int phandle_format = PHANDLE_EPAPR; /* Use linux,phandle or phandle properties */
int generate_symbols; /* enable symbols & fixup support */
int generate_fixups; /* suppress generation of fixups on symbol support */
@@ -289,7 +289,9 @@ int main(int argc, char *argv[])
if (!depfile)
die("Couldn't open dependency file %s: %s\n", depname,
strerror(errno));
- fprintf(depfile, "%s:", outname);
+
+ fprint_path_escaped(depfile, outname);
+ fputc(':', depfile);
}
if (inform == NULL)
diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h
index 4c4aaca..3a220b9 100644
--- a/scripts/dtc/dtc.h
+++ b/scripts/dtc/dtc.h
@@ -38,7 +38,7 @@ extern int quiet; /* Level of quietness */
extern unsigned int reservenum; /* Number of memory reservation slots */
extern int minsize; /* Minimum blob size */
extern int padsize; /* Additional padding to blob */
-extern int alignsize; /* Additional padding to blob accroding to the alignsize */
+extern int alignsize; /* Additional padding to blob according to the alignsize */
extern int phandle_format; /* Use linux,phandle or phandle properties */
extern int generate_symbols; /* generate symbols for nodes with labels */
extern int generate_fixups; /* generate fixups */
@@ -182,7 +182,10 @@ struct data data_append_addr(struct data d, uint64_t addr);
struct data data_append_byte(struct data d, uint8_t byte);
struct data data_append_zeroes(struct data d, int len);
struct data data_append_align(struct data d, int align);
+struct data data_insert_data(struct data d, struct marker *m, struct data old);
+struct marker *alloc_marker(unsigned int offset, enum markertype type,
+ char *ref);
struct data data_add_marker(struct data d, enum markertype type, char *ref);
bool data_is_one_string(struct data d);
diff --git a/scripts/dtc/fdtoverlay.c b/scripts/dtc/fdtoverlay.c
index 699b4f6..ee1eb8f 100644
--- a/scripts/dtc/fdtoverlay.c
+++ b/scripts/dtc/fdtoverlay.c
@@ -46,6 +46,7 @@ static void *apply_one(char *base, const char *overlay, size_t *buf_len,
char *tmp = NULL;
char *tmpo;
int ret;
+ bool has_symbols;
/*
* We take copies first, because a failed apply can trash
@@ -62,6 +63,8 @@ static void *apply_one(char *base, const char *overlay, size_t *buf_len,
fdt_strerror(ret));
goto fail;
}
+ ret = fdt_path_offset(tmp, "/__symbols__");
+ has_symbols = ret >= 0;
memcpy(tmpo, overlay, fdt_totalsize(overlay));
@@ -74,6 +77,11 @@ static void *apply_one(char *base, const char *overlay, size_t *buf_len,
if (ret) {
fprintf(stderr, "\nFailed to apply '%s': %s\n",
name, fdt_strerror(ret));
+ if (!has_symbols) {
+ fprintf(stderr,
+ "base blob does not have a '/__symbols__' node, "
+ "make sure you have compiled the base blob with '-@' option\n");
+ }
goto fail;
}
diff --git a/scripts/dtc/flattree.c b/scripts/dtc/flattree.c
index 1bcd808..30e6de2 100644
--- a/scripts/dtc/flattree.c
+++ b/scripts/dtc/flattree.c
@@ -503,7 +503,7 @@ void dt_to_asm(FILE *f, struct dt_info *dti, int version)
* Reserve map entries.
* Align the reserve map to a doubleword boundary.
* Each entry is an (address, size) pair of u64 values.
- * Always supply a zero-sized temination entry.
+ * Always supply a zero-sized termination entry.
*/
asm_emit_align(f, 8);
emit_label(f, symprefix, "reserve_map");
diff --git a/scripts/dtc/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c
index 20c6415..95f644c 100644
--- a/scripts/dtc/libfdt/fdt.c
+++ b/scripts/dtc/libfdt/fdt.c
@@ -312,14 +312,14 @@ int fdt_next_subnode(const void *fdt, int offset)
return offset;
}
-const char *fdt_find_string_(const char *strtab, int tabsize, const char *s)
+const char *fdt_find_string_len_(const char *strtab, int tabsize, const char *s,
+ int slen)
{
- int len = strlen(s) + 1;
- const char *last = strtab + tabsize - len;
+ const char *last = strtab + tabsize - (slen + 1);
const char *p;
for (p = strtab; p <= last; p++)
- if (memcmp(p, s, len) == 0)
+ if (memcmp(p, s, slen) == 0 && p[slen] == '\0')
return p;
return NULL;
}
diff --git a/scripts/dtc/libfdt/fdt.h b/scripts/dtc/libfdt/fdt.h
index 0c91aa7f..a07abfc 100644
--- a/scripts/dtc/libfdt/fdt.h
+++ b/scripts/dtc/libfdt/fdt.h
@@ -7,7 +7,7 @@
* Copyright 2012 Kim Phillips, Freescale Semiconductor.
*/
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
struct fdt_header {
fdt32_t magic; /* magic word FDT_MAGIC */
@@ -45,7 +45,7 @@ struct fdt_property {
char data[];
};
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */
#define FDT_TAGSIZE sizeof(fdt32_t)
diff --git a/scripts/dtc/libfdt/fdt_overlay.c b/scripts/dtc/libfdt/fdt_overlay.c
index 28b667f..e6b9eb6 100644
--- a/scripts/dtc/libfdt/fdt_overlay.c
+++ b/scripts/dtc/libfdt/fdt_overlay.c
@@ -307,7 +307,6 @@ static int overlay_update_local_references(void *fdto, uint32_t delta)
/**
* overlay_fixup_one_phandle - Set an overlay phandle to the base one
- * @fdt: Base Device Tree blob
* @fdto: Device tree overlay blob
* @symbols_off: Node offset of the symbols node in the base device tree
* @path: Path to a node holding a phandle in the overlay
@@ -328,8 +327,7 @@ static int overlay_update_local_references(void *fdto, uint32_t delta)
* 0 on success
* Negative error code on failure
*/
-static int overlay_fixup_one_phandle(void *fdt, void *fdto,
- int symbols_off,
+static int overlay_fixup_one_phandle(void *fdto, int symbols_off,
const char *path, uint32_t path_len,
const char *name, uint32_t name_len,
int poffset, uint32_t phandle)
@@ -351,7 +349,7 @@ static int overlay_fixup_one_phandle(void *fdt, void *fdto,
name, name_len, poffset,
&phandle_prop,
sizeof(phandle_prop));
-};
+}
/**
* overlay_fixup_phandle - Set an overlay phandle to the base one
@@ -443,7 +441,7 @@ static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off,
if ((*endptr != '\0') || (endptr <= (sep + 1)))
return -FDT_ERR_BADOVERLAY;
- ret = overlay_fixup_one_phandle(fdt, fdto, symbols_off,
+ ret = overlay_fixup_one_phandle(fdto, symbols_off,
path, path_len, name, name_len,
poffset, phandle);
if (ret)
diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c
index 3621d36..7475cafc 100644
--- a/scripts/dtc/libfdt/fdt_rw.c
+++ b/scripts/dtc/libfdt/fdt_rw.c
@@ -124,31 +124,33 @@ static int fdt_splice_string_(void *fdt, int newlen)
* allocated. Ignored if can_assume(NO_ROLLBACK)
* @return offset of string in the string table (whether found or added)
*/
-static int fdt_find_add_string_(void *fdt, const char *s, int *allocated)
+static int fdt_find_add_string_(void *fdt, const char *s, int slen,
+ int *allocated)
{
char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
const char *p;
char *new;
- int len = strlen(s) + 1;
int err;
if (!can_assume(NO_ROLLBACK))
*allocated = 0;
- p = fdt_find_string_(strtab, fdt_size_dt_strings(fdt), s);
+ p = fdt_find_string_len_(strtab, fdt_size_dt_strings(fdt), s, slen);
if (p)
/* found it */
return (p - strtab);
new = strtab + fdt_size_dt_strings(fdt);
- err = fdt_splice_string_(fdt, len);
+ err = fdt_splice_string_(fdt, slen + 1);
if (err)
return err;
if (!can_assume(NO_ROLLBACK))
*allocated = 1;
- memcpy(new, s, len);
+ memcpy(new, s, slen);
+ new[slen] = '\0';
+
return (new - strtab);
}
@@ -181,13 +183,15 @@ int fdt_del_mem_rsv(void *fdt, int n)
return fdt_splice_mem_rsv_(fdt, re, 1, 0);
}
-static int fdt_resize_property_(void *fdt, int nodeoffset, const char *name,
+static int fdt_resize_property_(void *fdt, int nodeoffset,
+ const char *name, int namelen,
int len, struct fdt_property **prop)
{
int oldlen;
int err;
- *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+ *prop = fdt_get_property_namelen_w(fdt, nodeoffset, name, namelen,
+ &oldlen);
if (!*prop)
return oldlen;
@@ -200,7 +204,7 @@ static int fdt_resize_property_(void *fdt, int nodeoffset, const char *name,
}
static int fdt_add_property_(void *fdt, int nodeoffset, const char *name,
- int len, struct fdt_property **prop)
+ int namelen, int len, struct fdt_property **prop)
{
int proplen;
int nextoffset;
@@ -211,7 +215,7 @@ static int fdt_add_property_(void *fdt, int nodeoffset, const char *name,
if ((nextoffset = fdt_check_node_offset_(fdt, nodeoffset)) < 0)
return nextoffset;
- namestroff = fdt_find_add_string_(fdt, name, &allocated);
+ namestroff = fdt_find_add_string_(fdt, name, namelen, &allocated);
if (namestroff < 0)
return namestroff;
@@ -255,17 +259,18 @@ int fdt_set_name(void *fdt, int nodeoffset, const char *name)
return 0;
}
-int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
- int len, void **prop_data)
+int fdt_setprop_placeholder_namelen(void *fdt, int nodeoffset, const char *name,
+ int namelen, int len, void **prop_data)
{
struct fdt_property *prop;
int err;
FDT_RW_PROBE(fdt);
- err = fdt_resize_property_(fdt, nodeoffset, name, len, &prop);
+ err = fdt_resize_property_(fdt, nodeoffset, name, namelen, len, &prop);
if (err == -FDT_ERR_NOTFOUND)
- err = fdt_add_property_(fdt, nodeoffset, name, len, &prop);
+ err = fdt_add_property_(fdt, nodeoffset, name, namelen, len,
+ &prop);
if (err)
return err;
@@ -273,13 +278,14 @@ int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
return 0;
}
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
- const void *val, int len)
+int fdt_setprop_namelen(void *fdt, int nodeoffset, const char *name,
+ int namelen, const void *val, int len)
{
void *prop_data;
int err;
- err = fdt_setprop_placeholder(fdt, nodeoffset, name, len, &prop_data);
+ err = fdt_setprop_placeholder_namelen(fdt, nodeoffset, name, namelen,
+ len, &prop_data);
if (err)
return err;
@@ -307,7 +313,8 @@ int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
prop->len = cpu_to_fdt32(newlen);
memcpy(prop->data + oldlen, val, len);
} else {
- err = fdt_add_property_(fdt, nodeoffset, name, len, &prop);
+ err = fdt_add_property_(fdt, nodeoffset, name, strlen(name),
+ len, &prop);
if (err)
return err;
memcpy(prop->data, val, len);
diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h
index 2d409d8..914bf90 100644
--- a/scripts/dtc/libfdt/libfdt.h
+++ b/scripts/dtc/libfdt/libfdt.h
@@ -14,7 +14,7 @@ extern "C" {
#endif
#define FDT_FIRST_SUPPORTED_VERSION 0x02
-#define FDT_LAST_COMPATIBLE_VERSION 0x10
+#define FDT_LAST_COMPATIBLE_VERSION 0x10
#define FDT_LAST_SUPPORTED_VERSION 0x11
/* Error codes: informative error codes */
@@ -263,16 +263,16 @@ int fdt_next_subnode(const void *fdt, int offset);
struct fdt_header *fdth = (struct fdt_header *)fdt; \
fdth->name = cpu_to_fdt32(val); \
}
-fdt_set_hdr_(magic);
-fdt_set_hdr_(totalsize);
-fdt_set_hdr_(off_dt_struct);
-fdt_set_hdr_(off_dt_strings);
-fdt_set_hdr_(off_mem_rsvmap);
-fdt_set_hdr_(version);
-fdt_set_hdr_(last_comp_version);
-fdt_set_hdr_(boot_cpuid_phys);
-fdt_set_hdr_(size_dt_strings);
-fdt_set_hdr_(size_dt_struct);
+fdt_set_hdr_(magic)
+fdt_set_hdr_(totalsize)
+fdt_set_hdr_(off_dt_struct)
+fdt_set_hdr_(off_dt_strings)
+fdt_set_hdr_(off_mem_rsvmap)
+fdt_set_hdr_(version)
+fdt_set_hdr_(last_comp_version)
+fdt_set_hdr_(boot_cpuid_phys)
+fdt_set_hdr_(size_dt_strings)
+fdt_set_hdr_(size_dt_struct)
#undef fdt_set_hdr_
/**
@@ -285,7 +285,7 @@ size_t fdt_header_size(const void *fdt);
/**
* fdt_header_size_ - internal function to get header size from a version number
- * @version: devicetree version number
+ * @version: device tree version number
*
* Return: size of DTB header in bytes
*/
@@ -554,7 +554,7 @@ int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen);
* -FDT_ERR_BADPATH, given path does not begin with '/' and the first
* component is not a valid alias
* -FDT_ERR_NOTFOUND, if the requested node does not exist
- * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
* -FDT_ERR_BADSTRUCTURE,
@@ -599,7 +599,7 @@ const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
* structure block offset of the property (>=0), on success
* -FDT_ERR_NOTFOUND, if the requested node has no properties
* -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
* -FDT_ERR_BADSTRUCTURE,
@@ -620,7 +620,7 @@ int fdt_first_property_offset(const void *fdt, int nodeoffset);
* structure block offset of the next property (>=0), on success
* -FDT_ERR_NOTFOUND, if the given property is the last in its node
* -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag
- * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
* -FDT_ERR_BADSTRUCTURE,
@@ -712,6 +712,13 @@ const struct fdt_property *fdt_get_property_namelen(const void *fdt,
int nodeoffset,
const char *name,
int namelen, int *lenp);
+static inline struct fdt_property *
+fdt_get_property_namelen_w(void *fdt, int nodeoffset, const char *name,
+ int namelen, int *lenp)
+{
+ return (struct fdt_property *)(uintptr_t)fdt_get_property_namelen(
+ fdt, nodeoffset, name, namelen, lenp);
+}
#endif
/**
@@ -764,7 +771,7 @@ static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
* to within the device blob itself, not a copy of the value). If
* lenp is non-NULL, the length of the property value is also
* returned, in the integer pointed to by lenp. If namep is non-NULL,
- * the property's namne will also be returned in the char * pointed to
+ * the property's name will also be returned in the char * pointed to
* by namep (this will be a pointer to within the device tree's string
* block, not a new copy of the name).
*
@@ -772,7 +779,7 @@ static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
* pointer to the property's value
* if lenp is non-NULL, *lenp contains the length of the property
* value (>=0)
- * if namep is non-NULL *namep contiains a pointer to the property
+ * if namep is non-NULL *namep contains a pointer to the property
* name.
* NULL, on error
* if lenp is non-NULL, *lenp contains an error code (<0):
@@ -866,7 +873,7 @@ uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
/**
* fdt_get_alias_namelen - get alias based on substring
* @fdt: pointer to the device tree blob
- * @name: name of the alias th look up
+ * @name: name of the alias to look up
* @namelen: number of characters of name to consider
*
* Identical to fdt_get_alias(), but only examine the first @namelen
@@ -883,7 +890,7 @@ const char *fdt_get_alias_namelen(const void *fdt,
/**
* fdt_get_alias - retrieve the path referenced by a given alias
* @fdt: pointer to the device tree blob
- * @name: name of the alias th look up
+ * @name: name of the alias to look up
*
* fdt_get_alias() retrieves the value of a given alias. That is, the
* value of the property named @name in the node /aliases.
@@ -1259,8 +1266,8 @@ const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
*
* returns:
* 0 <= n < FDT_MAX_NCELLS, on success
- * 2, if the node has no #address-cells property
- * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ * 2, if the node has no #address-cells property
+ * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
* #address-cells property
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
@@ -1280,8 +1287,8 @@ int fdt_address_cells(const void *fdt, int nodeoffset);
*
* returns:
* 0 <= n < FDT_MAX_NCELLS, on success
- * 1, if the node has no #size-cells property
- * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
+ * 1, if the node has no #size-cells property
+ * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
* #size-cells property
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
@@ -1562,7 +1569,7 @@ static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
* @fdt: pointer to the device tree blob
* @name: name of property to add
* @len: length of property value in bytes
- * @valp: returns a pointer to where where the value should be placed
+ * @valp: returns a pointer to where the value should be placed
*
* returns:
* 0, on success
@@ -1660,6 +1667,38 @@ int fdt_del_mem_rsv(void *fdt, int n);
int fdt_set_name(void *fdt, int nodeoffset, const char *name);
/**
+ * fdt_setprop_namelen - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @namelen: length of the name
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop_namelen() sets the value of the named property in the given
+ * node to the given value and length, creating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop_namelen(void *fdt, int nodeoffset, const char *name,
+ int namelen, const void *val, int len);
+
+/**
* fdt_setprop - create or change a property
* @fdt: pointer to the device tree blob
* @nodeoffset: offset of the node whose property to change
@@ -1687,18 +1726,23 @@ int fdt_set_name(void *fdt, int nodeoffset, const char *name);
* -FDT_ERR_BADLAYOUT,
* -FDT_ERR_TRUNCATED, standard meanings
*/
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
- const void *val, int len);
+static inline int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ return fdt_setprop_namelen(fdt, nodeoffset, name, strlen(name), val,
+ len);
+}
/**
- * fdt_setprop_placeholder - allocate space for a property
+ * fdt_setprop_placeholder_namelen - allocate space for a property
* @fdt: pointer to the device tree blob
* @nodeoffset: offset of the node whose property to change
* @name: name of the property to change
+ * @namelen: length of the name
* @len: length of the property value
* @prop_data: return pointer to property data
*
- * fdt_setprop_placeholer() allocates the named property in the given node.
+ * fdt_setprop_placeholder_namelen() allocates the named property in the given node.
* If the property exists it is resized. In either case a pointer to the
* property data is returned.
*
@@ -1718,8 +1762,44 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name,
* -FDT_ERR_BADLAYOUT,
* -FDT_ERR_TRUNCATED, standard meanings
*/
-int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
- int len, void **prop_data);
+int fdt_setprop_placeholder_namelen(void *fdt, int nodeoffset, const char *name,
+ int namelen, int len, void **prop_data);
+
+/**
+ * fdt_setprop_placeholder - allocate space for a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @len: length of the property value
+ * @prop_data: return pointer to property data
+ *
+ * fdt_setprop_placeholder() allocates the named property in the given node.
+ * If the property exists it is resized. In either case a pointer to the
+ * property data is returned.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_placeholder(void *fdt, int nodeoffset,
+ const char *name, int len,
+ void **prop_data)
+{
+ return fdt_setprop_placeholder_namelen(fdt, nodeoffset, name,
+ strlen(name), len, prop_data);
+}
/**
* fdt_setprop_u32 - set a property to a 32-bit integer
@@ -1839,6 +1919,38 @@ static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
#define fdt_setprop_string(fdt, nodeoffset, name, str) \
fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+/**
+ * fdt_setprop_namelen_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @namelen: number of characters of name to consider
+ * @str: string value for the property
+ *
+ * fdt_setprop_namelen_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_setprop_namelen_string(fdt, nodeoffset, name, namelen, str) \
+ fdt_setprop_namelen((fdt), (nodeoffset), (name), (namelen), (str), \
+ strlen(str) + 1)
/**
* fdt_setprop_empty - set a property to an empty value
@@ -2059,7 +2171,7 @@ int fdt_appendprop_addrrange(void *fdt, int parent, int nodeoffset,
* @nodeoffset: offset of the node whose property to nop
* @name: name of the property to nop
*
- * fdt_del_property() will delete the given property.
+ * fdt_delprop() will delete the given property.
*
* This function will delete data from the blob, and will therefore
* change the offsets of some existing nodes.
@@ -2111,8 +2223,7 @@ int fdt_add_subnode_namelen(void *fdt, int parentoffset,
* change the offsets of some existing nodes.
*
* returns:
- * structure block offset of the created nodeequested subnode (>=0), on
- * success
+ * structure block offset of the created subnode (>=0), on success
* -FDT_ERR_NOTFOUND, if the requested subnode does not exist
* -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
* tag
@@ -2122,7 +2233,7 @@ int fdt_add_subnode_namelen(void *fdt, int parentoffset,
* blob to contain the new node
* -FDT_ERR_NOSPACE
* -FDT_ERR_BADLAYOUT
- * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTATE,
* -FDT_ERR_BADSTRUCTURE,
@@ -2167,7 +2278,7 @@ int fdt_del_node(void *fdt, int nodeoffset);
* returns:
* 0, on success
* -FDT_ERR_NOSPACE, there's not enough space in the base device tree
- * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or
+ * -FDT_ERR_NOTFOUND, the overlay points to some nonexistent nodes or
* properties in the base DT
* -FDT_ERR_BADPHANDLE,
* -FDT_ERR_BADOVERLAY,
diff --git a/scripts/dtc/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h
index 16bda19..b60b545 100644
--- a/scripts/dtc/libfdt/libfdt_internal.h
+++ b/scripts/dtc/libfdt/libfdt_internal.h
@@ -20,7 +20,15 @@ int32_t fdt_ro_probe_(const void *fdt);
int fdt_check_node_offset_(const void *fdt, int offset);
int fdt_check_prop_offset_(const void *fdt, int offset);
-const char *fdt_find_string_(const char *strtab, int tabsize, const char *s);
+
+const char *fdt_find_string_len_(const char *strtab, int tabsize, const char *s,
+ int s_len);
+static inline const char *fdt_find_string_(const char *strtab, int tabsize,
+ const char *s)
+{
+ return fdt_find_string_len_(strtab, tabsize, s, strlen(s));
+}
+
int fdt_node_end_offset_(void *fdt, int nodeoffset);
static inline const void *fdt_offset_ptr_(const void *fdt, int offset)
@@ -47,8 +55,8 @@ static inline struct fdt_reserve_entry *fdt_mem_rsv_w_(void *fdt, int n)
}
/*
- * Internal helpers to access tructural elements of the device tree
- * blob (rather than for exaple reading integers from within property
+ * Internal helpers to access structural elements of the device tree
+ * blob (rather than for example reading integers from within property
* values). We assume that we are either given a naturally aligned
* address for the platform or if we are not, we are on a platform
* where unaligned memory reads will be handled in a graceful manner.
diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c
index 49f7230..d51d058 100644
--- a/scripts/dtc/livetree.c
+++ b/scripts/dtc/livetree.c
@@ -174,7 +174,7 @@ struct node *merge_nodes(struct node *old_node, struct node *new_node)
old_prop->val = new_prop->val;
old_prop->deleted = 0;
- free(old_prop->srcpos);
+ srcpos_free(old_prop->srcpos);
old_prop->srcpos = new_prop->srcpos;
free(new_prop);
new_prop = NULL;
@@ -504,7 +504,7 @@ struct node *get_subnode(struct node *node, const char *nodename)
struct node *child;
for_each_child(node, child)
- if (streq(child->name, nodename))
+ if (streq(child->name, nodename) && !child->deleted)
return child;
return NULL;
@@ -1014,9 +1014,7 @@ static void add_local_fixup_entry(struct dt_info *dti,
/* walk the path components creating nodes if they don't exist */
for (wn = lfn, i = 1; i < depth; i++, wn = nwn) {
/* if no node exists, create it */
- nwn = get_subnode(wn, compp[i]);
- if (!nwn)
- nwn = build_and_name_child_node(wn, compp[i]);
+ nwn = build_root_node(wn, compp[i]);
}
free(compp);
@@ -1058,16 +1056,29 @@ void generate_label_tree(struct dt_info *dti, const char *name, bool allocph)
void generate_fixups_tree(struct dt_info *dti, const char *name)
{
+ struct node *n = get_subnode(dti->dt, name);
+
+ /* Start with an empty __fixups__ node to not get duplicates */
+ if (n)
+ n->deleted = true;
+
if (!any_fixup_tree(dti, dti->dt))
return;
- generate_fixups_tree_internal(dti, build_root_node(dti->dt, name),
+ generate_fixups_tree_internal(dti,
+ build_and_name_child_node(dti->dt, name),
dti->dt);
}
void generate_local_fixups_tree(struct dt_info *dti, const char *name)
{
+ struct node *n = get_subnode(dti->dt, name);
+
+ /* Start with an empty __local_fixups__ node to not get duplicates */
+ if (n)
+ n->deleted = true;
if (!any_local_fixup_tree(dti, dti->dt))
return;
- generate_local_fixups_tree_internal(dti, build_root_node(dti->dt, name),
+ generate_local_fixups_tree_internal(dti,
+ build_and_name_child_node(dti->dt, name),
dti->dt);
}
diff --git a/scripts/dtc/srcpos.c b/scripts/dtc/srcpos.c
index 8e4d18a9..5bb57bf6 100644
--- a/scripts/dtc/srcpos.c
+++ b/scripts/dtc/srcpos.c
@@ -160,8 +160,10 @@ FILE *srcfile_relative_open(const char *fname, char **fullnamep)
strerror(errno));
}
- if (depfile)
- fprintf(depfile, " %s", fullname);
+ if (depfile) {
+ fputc(' ', depfile);
+ fprint_path_escaped(depfile, fullname);
+ }
if (fullnamep)
*fullnamep = fullname;
@@ -285,6 +287,17 @@ struct srcpos *srcpos_extend(struct srcpos *pos, struct srcpos *newtail)
return pos;
}
+void srcpos_free(struct srcpos *pos)
+{
+ struct srcpos *p_next;
+
+ while (pos) {
+ p_next = pos->next;
+ free(pos);
+ pos = p_next;
+ }
+}
+
char *
srcpos_string(struct srcpos *pos)
{
diff --git a/scripts/dtc/srcpos.h b/scripts/dtc/srcpos.h
index 4318d7a..4d60b50 100644
--- a/scripts/dtc/srcpos.h
+++ b/scripts/dtc/srcpos.h
@@ -88,6 +88,7 @@ extern void srcpos_update(struct srcpos *pos, const char *text, int len);
extern struct srcpos *srcpos_copy(struct srcpos *pos);
extern struct srcpos *srcpos_extend(struct srcpos *new_srcpos,
struct srcpos *old_srcpos);
+extern void srcpos_free(struct srcpos *pos);
extern char *srcpos_string(struct srcpos *pos);
extern char *srcpos_string_first(struct srcpos *pos, int level);
extern char *srcpos_string_last(struct srcpos *pos, int level);
diff --git a/scripts/dtc/treesource.c b/scripts/dtc/treesource.c
index ae15839..d25f01fc 100644
--- a/scripts/dtc/treesource.c
+++ b/scripts/dtc/treesource.c
@@ -139,26 +139,48 @@ static const char *delim_end[] = {
[TYPE_STRING] = "",
};
+/*
+ * The invariants in the marker list are:
+ * - offsets are non-strictly monotonically increasing
+ * - for a single offset there is at most one type marker
+ * - for a single offset that has both a type marker and non-type markers, the
+ * type marker appears before the others.
+ */
+static struct marker **add_marker(struct marker **mi,
+ enum markertype type, unsigned int offset, char *ref)
+{
+ struct marker *nm;
+
+ while (*mi && (*mi)->offset < offset)
+ mi = &(*mi)->next;
+
+ if (*mi && (*mi)->offset == offset && is_type_marker((*mi)->type)) {
+ if (is_type_marker(type))
+ return mi;
+ mi = &(*mi)->next;
+ }
+
+ if (*mi && (*mi)->offset == offset && type == (*mi)->type)
+ return mi;
+
+ nm = xmalloc(sizeof(*nm));
+ nm->type = type;
+ nm->offset = offset;
+ nm->ref = ref;
+ nm->next = *mi;
+ *mi = nm;
+
+ return &nm->next;
+}
+
static void add_string_markers(struct property *prop)
{
int l, len = prop->val.len;
const char *p = prop->val.val;
+ struct marker **mi = &prop->val.markers;
- for (l = strlen(p) + 1; l < len; l += strlen(p + l) + 1) {
- struct marker *m, **nextp;
-
- m = xmalloc(sizeof(*m));
- m->offset = l;
- m->type = TYPE_STRING;
- m->ref = NULL;
- m->next = NULL;
-
- /* Find the end of the markerlist */
- nextp = &prop->val.markers;
- while (*nextp)
- nextp = &((*nextp)->next);
- *nextp = m;
- }
+ for (l = strlen(p) + 1; l < len; l += strlen(p + l) + 1)
+ mi = add_marker(mi, TYPE_STRING, l, NULL);
}
static enum markertype guess_value_type(struct property *prop)
diff --git a/scripts/dtc/util.c b/scripts/dtc/util.c
index 507f012..4125923 100644
--- a/scripts/dtc/util.c
+++ b/scripts/dtc/util.c
@@ -23,6 +23,22 @@
#include "util.h"
#include "version_gen.h"
+void fprint_path_escaped(FILE *fp, const char *path)
+{
+ const char *p = path;
+
+ while (*p) {
+ if (*p == ' ') {
+ fputc('\\', fp);
+ fputc(' ', fp);
+ } else {
+ fputc(*p, fp);
+ }
+
+ p++;
+ }
+}
+
char *xstrdup(const char *s)
{
int len = strlen(s) + 1;
diff --git a/scripts/dtc/util.h b/scripts/dtc/util.h
index b448cd7..800f2e2 100644
--- a/scripts/dtc/util.h
+++ b/scripts/dtc/util.h
@@ -42,6 +42,11 @@ static inline void NORETURN PRINTF(1, 2) die(const char *str, ...)
exit(1);
}
+/**
+ * Writes path to fp, escaping spaces with a backslash.
+ */
+void fprint_path_escaped(FILE *fp, const char *path);
+
static inline void *xmalloc(size_t len)
{
void *new = malloc(len);
diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h
index bf81ce5..226c48b 100644
--- a/scripts/dtc/version_gen.h
+++ b/scripts/dtc/version_gen.h
@@ -1 +1 @@
-#define DTC_VERSION "DTC 1.7.0-gbcd02b52"
+#define DTC_VERSION "DTC 1.7.2-g52f07dcc"
diff --git a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c
index 9741e75..de93067 100644
--- a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c
+++ b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c
@@ -995,7 +995,7 @@ static acpi_status osl_list_customized_tables(char *directory)
{
void *table_dir;
u32 instance;
- char temp_name[ACPI_NAMESEG_SIZE];
+ char temp_name[ACPI_NAMESEG_SIZE] ACPI_NONSTRING;
char *filename;
acpi_status status = AE_OK;
@@ -1312,7 +1312,7 @@ osl_get_customized_table(char *pathname,
{
void *table_dir;
u32 current_instance = 0;
- char temp_name[ACPI_NAMESEG_SIZE];
+ char temp_name[ACPI_NAMESEG_SIZE] ACPI_NONSTRING;
char table_filename[PATH_MAX];
char *filename;
acpi_status status;
diff --git a/tools/power/acpi/tools/acpidump/apdump.c b/tools/power/acpi/tools/acpidump/apdump.c
index bf30143..7a6223a 100644
--- a/tools/power/acpi/tools/acpidump/apdump.c
+++ b/tools/power/acpi/tools/acpidump/apdump.c
@@ -86,9 +86,10 @@ u8 ap_is_valid_checksum(struct acpi_table_header *table)
if (ACPI_FAILURE(status)) {
fprintf(stderr, "%4.4s: Warning: wrong checksum in table\n",
table->signature);
+ return (FALSE);
}
- return (AE_OK);
+ return (TRUE);
}
/******************************************************************************
diff --git a/tools/power/acpi/tools/acpidump/apfiles.c b/tools/power/acpi/tools/acpidump/apfiles.c
index 75db009..d6b8a201 100644
--- a/tools/power/acpi/tools/acpidump/apfiles.c
+++ b/tools/power/acpi/tools/acpidump/apfiles.c
@@ -103,7 +103,7 @@ int ap_open_output_file(char *pathname)
int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance)
{
- char filename[ACPI_NAMESEG_SIZE + 16] ACPI_NONSTRING;
+ char filename[ACPI_NAMESEG_SIZE + 16];
char instance_str[16];
ACPI_FILE file;
acpi_size actual;
diff --git a/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c b/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c
index ba58589..ca2bd03 100644
--- a/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c
+++ b/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c
@@ -144,6 +144,8 @@ int main(int argc, char **argv)
ret = sscanf(index_str, "%d", &index);
if (ret < 0)
break;
+
+ index &= 0x0f;
if (index > WORKLOAD_TYPE_MAX_INDEX)
printf("Invalid workload type index\n");
else
