blob: 657dd93c5e7661c1a10424942f1f6a6caeea33d4 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
if MIPS_GENERIC_KERNEL
config LEGACY_BOARDS
bool
help
Select this from your board if the board must use a legacy, non-UHI,
boot protocol. This will cause the kernel to scan through the list of
supported machines calling their detect functions in turn if the
kernel is booted without being provided with an FDT via the UHI
boot protocol.
config YAMON_DT_SHIM
bool
help
Select this from your board if the board uses the YAMON bootloader
and you wish to include code which helps translate various
YAMON-provided environment variables into a device tree properties.
comment "Legacy (non-UHI/non-FIT) Boards"
config LEGACY_BOARD_SEAD3
bool "Support MIPS SEAD-3 boards"
select LEGACY_BOARDS
select YAMON_DT_SHIM
help
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
comment "MSCC Ocelot doesn't work with SEAD3 enabled"
depends on LEGACY_BOARD_SEAD3
config LEGACY_BOARD_OCELOT
bool "Legacy support for Ocelot based boards"
depends on LEGACY_BOARD_SEAD3=n
select LEGACY_BOARDS
select SOC_VCOREIII
select SYS_HAS_EARLY_PRINTK
select USE_GENERIC_EARLY_PRINTK_8250
config SOC_VCOREIII
bool
select GPIOLIB
select MSCC_OCELOT_IRQ
select MSCC_OCELOT #will be removed when driver no more use it
#Will be removed when the driver using it will be converted to SOC_VCOREIII
config MSCC_OCELOT
bool
comment "FIT/UHI Boards"
config FIT_IMAGE_FDT_BOSTON
bool "Include FDT for MIPS Boston boards"
help
Enable this to include the FDT for the MIPS Boston development board
from Imagination Technologies in the FIT kernel image. You should
enable this if you wish to boot on a MIPS Boston board, as it is
expected by the bootloader.
config FIT_IMAGE_FDT_NI169445
bool "Include FDT for NI 169445"
help
Enable this to include the FDT for the 169445 platform from
National Instruments in the FIT kernel image.
config FIT_IMAGE_FDT_XILFPGA
bool "Include FDT for Xilfpga"
help
Enable this to include the FDT for the MIPSfpga platform
from Imagination Technologies in the FIT kernel image.
config FIT_IMAGE_FDT_OCELOT
bool "Include FDT for Microsemi Ocelot development platforms"
select SOC_VCOREIII
help
Enable this to include the FDT for the Ocelot development platforms
from Microsemi in the FIT kernel image.
This requires u-boot on the platform.
config FIT_IMAGE_FDT_LUTON
bool "Include FDT for Microsemi Luton development platforms"
select SOC_VCOREIII
help
Enable this to include the FDT for the Luton development platforms
from Microsemi in the FIT kernel image.
This requires u-boot on the platform.
config FIT_IMAGE_FDT_JAGUAR2
bool "Include FDT for Microsemi Jaguar2 development platforms"
select SOC_VCOREIII
help
Enable this to include the FDT for the Jaguar2 development platforms
from Microsemi in the FIT kernel image.
This requires u-boot on the platform.
config FIT_IMAGE_FDT_SERVAL
bool "Include FDT for Microsemi Serval development platforms"
select SOC_VCOREIII
help
Enable this to include the FDT for the Serval development platforms
from Microsemi in the FIT kernel image.
This requires u-boot on the platform.
config BOARD_INGENIC
bool "Support boards based on Ingenic SoCs"
select MACH_INGENIC_GENERIC
help
Enable support for boards based on Ingenic SoCs.
config VIRT_BOARD_RANCHU
bool "Support Ranchu platform for Android emulator"
help
This enables support for the platform used by Android emulator.
Ranchu platform consists of a set of virtual devices. This platform
enables emulation of variety of virtual configurations while using
Android emulator. Android emulator is based on Qemu, and contains
the support for the same set of virtual devices.
endif