| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * drivers/base/core.c - core driver model code (device registration, etc) |
| * |
| * Copyright (c) 2002-3 Patrick Mochel |
| * Copyright (c) 2002-3 Open Source Development Labs |
| * Copyright (c) 2006 Greg Kroah-Hartman <gregkh@suse.de> |
| * Copyright (c) 2006 Novell, Inc. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/cpufreq.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/fwnode.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/kdev_t.h> |
| #include <linux/notifier.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/genhd.h> |
| #include <linux/mutex.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/netdevice.h> |
| #include <linux/rcupdate.h> |
| #include <linux/sched/signal.h> |
| #include <linux/sched/mm.h> |
| #include <linux/swiotlb.h> |
| #include <linux/sysfs.h> |
| |
| #include "base.h" |
| #include "power/power.h" |
| |
| #ifdef CONFIG_SYSFS_DEPRECATED |
| #ifdef CONFIG_SYSFS_DEPRECATED_V2 |
| long sysfs_deprecated = 1; |
| #else |
| long sysfs_deprecated = 0; |
| #endif |
| static int __init sysfs_deprecated_setup(char *arg) |
| { |
| return kstrtol(arg, 10, &sysfs_deprecated); |
| } |
| early_param("sysfs.deprecated", sysfs_deprecated_setup); |
| #endif |
| |
| /* Device links support. */ |
| static LIST_HEAD(deferred_sync); |
| static unsigned int defer_sync_state_count = 1; |
| static DEFINE_MUTEX(fwnode_link_lock); |
| static struct workqueue_struct *device_link_wq; |
| static bool fw_devlink_is_permissive(void); |
| |
| /** |
| * fwnode_link_add - Create a link between two fwnode_handles. |
| * @con: Consumer end of the link. |
| * @sup: Supplier end of the link. |
| * |
| * Create a fwnode link between fwnode handles @con and @sup. The fwnode link |
| * represents the detail that the firmware lists @sup fwnode as supplying a |
| * resource to @con. |
| * |
| * The driver core will use the fwnode link to create a device link between the |
| * two device objects corresponding to @con and @sup when they are created. The |
| * driver core will automatically delete the fwnode link between @con and @sup |
| * after doing that. |
| * |
| * Attempts to create duplicate links between the same pair of fwnode handles |
| * are ignored and there is no reference counting. |
| */ |
| int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup) |
| { |
| struct fwnode_link *link; |
| int ret = 0; |
| |
| mutex_lock(&fwnode_link_lock); |
| |
| list_for_each_entry(link, &sup->consumers, s_hook) |
| if (link->consumer == con) |
| goto out; |
| |
| link = kzalloc(sizeof(*link), GFP_KERNEL); |
| if (!link) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| link->supplier = sup; |
| INIT_LIST_HEAD(&link->s_hook); |
| link->consumer = con; |
| INIT_LIST_HEAD(&link->c_hook); |
| |
| list_add(&link->s_hook, &sup->consumers); |
| list_add(&link->c_hook, &con->suppliers); |
| out: |
| mutex_unlock(&fwnode_link_lock); |
| |
| return ret; |
| } |
| |
| /** |
| * fwnode_links_purge_suppliers - Delete all supplier links of fwnode_handle. |
| * @fwnode: fwnode whose supplier links need to be deleted |
| * |
| * Deletes all supplier links connecting directly to @fwnode. |
| */ |
| static void fwnode_links_purge_suppliers(struct fwnode_handle *fwnode) |
| { |
| struct fwnode_link *link, *tmp; |
| |
| mutex_lock(&fwnode_link_lock); |
| list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) { |
| list_del(&link->s_hook); |
| list_del(&link->c_hook); |
| kfree(link); |
| } |
| mutex_unlock(&fwnode_link_lock); |
| } |
| |
| /** |
| * fwnode_links_purge_consumers - Delete all consumer links of fwnode_handle. |
| * @fwnode: fwnode whose consumer links need to be deleted |
| * |
| * Deletes all consumer links connecting directly to @fwnode. |
| */ |
| static void fwnode_links_purge_consumers(struct fwnode_handle *fwnode) |
| { |
| struct fwnode_link *link, *tmp; |
| |
| mutex_lock(&fwnode_link_lock); |
| list_for_each_entry_safe(link, tmp, &fwnode->consumers, s_hook) { |
| list_del(&link->s_hook); |
| list_del(&link->c_hook); |
| kfree(link); |
| } |
| mutex_unlock(&fwnode_link_lock); |
| } |
| |
| /** |
| * fwnode_links_purge - Delete all links connected to a fwnode_handle. |
| * @fwnode: fwnode whose links needs to be deleted |
| * |
| * Deletes all links connecting directly to a fwnode. |
| */ |
| void fwnode_links_purge(struct fwnode_handle *fwnode) |
| { |
| fwnode_links_purge_suppliers(fwnode); |
| fwnode_links_purge_consumers(fwnode); |
| } |
| |
| static void fw_devlink_purge_absent_suppliers(struct fwnode_handle *fwnode) |
| { |
| struct fwnode_handle *child; |
| |
| /* Don't purge consumer links of an added child */ |
| if (fwnode->dev) |
| return; |
| |
| fwnode->flags |= FWNODE_FLAG_NOT_DEVICE; |
| fwnode_links_purge_consumers(fwnode); |
| |
| fwnode_for_each_available_child_node(fwnode, child) |
| fw_devlink_purge_absent_suppliers(child); |
| } |
| |
| #ifdef CONFIG_SRCU |
| static DEFINE_MUTEX(device_links_lock); |
| DEFINE_STATIC_SRCU(device_links_srcu); |
| |
| static inline void device_links_write_lock(void) |
| { |
| mutex_lock(&device_links_lock); |
| } |
| |
| static inline void device_links_write_unlock(void) |
| { |
| mutex_unlock(&device_links_lock); |
| } |
| |
| int device_links_read_lock(void) __acquires(&device_links_srcu) |
| { |
| return srcu_read_lock(&device_links_srcu); |
| } |
| |
| void device_links_read_unlock(int idx) __releases(&device_links_srcu) |
| { |
| srcu_read_unlock(&device_links_srcu, idx); |
| } |
| |
| int device_links_read_lock_held(void) |
| { |
| return srcu_read_lock_held(&device_links_srcu); |
| } |
| |
| static void device_link_synchronize_removal(void) |
| { |
| synchronize_srcu(&device_links_srcu); |
| } |
| |
| static void device_link_remove_from_lists(struct device_link *link) |
| { |
| list_del_rcu(&link->s_node); |
| list_del_rcu(&link->c_node); |
| } |
| #else /* !CONFIG_SRCU */ |
| static DECLARE_RWSEM(device_links_lock); |
| |
| static inline void device_links_write_lock(void) |
| { |
| down_write(&device_links_lock); |
| } |
| |
| static inline void device_links_write_unlock(void) |
| { |
| up_write(&device_links_lock); |
| } |
| |
| int device_links_read_lock(void) |
| { |
| down_read(&device_links_lock); |
| return 0; |
| } |
| |
| void device_links_read_unlock(int not_used) |
| { |
| up_read(&device_links_lock); |
| } |
| |
| #ifdef CONFIG_DEBUG_LOCK_ALLOC |
| int device_links_read_lock_held(void) |
| { |
| return lockdep_is_held(&device_links_lock); |
| } |
| #endif |
| |
| static inline void device_link_synchronize_removal(void) |
| { |
| } |
| |
| static void device_link_remove_from_lists(struct device_link *link) |
| { |
| list_del(&link->s_node); |
| list_del(&link->c_node); |
| } |
| #endif /* !CONFIG_SRCU */ |
| |
| static bool device_is_ancestor(struct device *dev, struct device *target) |
| { |
| while (target->parent) { |
| target = target->parent; |
| if (dev == target) |
| return true; |
| } |
| return false; |
| } |
| |
| /** |
| * device_is_dependent - Check if one device depends on another one |
| * @dev: Device to check dependencies for. |
| * @target: Device to check against. |
| * |
| * Check if @target depends on @dev or any device dependent on it (its child or |
| * its consumer etc). Return 1 if that is the case or 0 otherwise. |
| */ |
| int device_is_dependent(struct device *dev, void *target) |
| { |
| struct device_link *link; |
| int ret; |
| |
| /* |
| * The "ancestors" check is needed to catch the case when the target |
| * device has not been completely initialized yet and it is still |
| * missing from the list of children of its parent device. |
| */ |
| if (dev == target || device_is_ancestor(dev, target)) |
| return 1; |
| |
| ret = device_for_each_child(dev, target, device_is_dependent); |
| if (ret) |
| return ret; |
| |
| list_for_each_entry(link, &dev->links.consumers, s_node) { |
| if ((link->flags & ~DL_FLAG_INFERRED) == |
| (DL_FLAG_SYNC_STATE_ONLY | DL_FLAG_MANAGED)) |
| continue; |
| |
| if (link->consumer == target) |
| return 1; |
| |
| ret = device_is_dependent(link->consumer, target); |
| if (ret) |
| break; |
| } |
| return ret; |
| } |
| |
| static void device_link_init_status(struct device_link *link, |
| struct device *consumer, |
| struct device *supplier) |
| { |
| switch (supplier->links.status) { |
| case DL_DEV_PROBING: |
| switch (consumer->links.status) { |
| case DL_DEV_PROBING: |
| /* |
| * A consumer driver can create a link to a supplier |
| * that has not completed its probing yet as long as it |
| * knows that the supplier is already functional (for |
| * example, it has just acquired some resources from the |
| * supplier). |
| */ |
| link->status = DL_STATE_CONSUMER_PROBE; |
| break; |
| default: |
| link->status = DL_STATE_DORMANT; |
| break; |
| } |
| break; |
| case DL_DEV_DRIVER_BOUND: |
| switch (consumer->links.status) { |
| case DL_DEV_PROBING: |
| link->status = DL_STATE_CONSUMER_PROBE; |
| break; |
| case DL_DEV_DRIVER_BOUND: |
| link->status = DL_STATE_ACTIVE; |
| break; |
| default: |
| link->status = DL_STATE_AVAILABLE; |
| break; |
| } |
| break; |
| case DL_DEV_UNBINDING: |
| link->status = DL_STATE_SUPPLIER_UNBIND; |
| break; |
| default: |
| link->status = DL_STATE_DORMANT; |
| break; |
| } |
| } |
| |
| static int device_reorder_to_tail(struct device *dev, void *not_used) |
| { |
| struct device_link *link; |
| |
| /* |
| * Devices that have not been registered yet will be put to the ends |
| * of the lists during the registration, so skip them here. |
| */ |
| if (device_is_registered(dev)) |
| devices_kset_move_last(dev); |
| |
| if (device_pm_initialized(dev)) |
| device_pm_move_last(dev); |
| |
| device_for_each_child(dev, NULL, device_reorder_to_tail); |
| list_for_each_entry(link, &dev->links.consumers, s_node) { |
| if ((link->flags & ~DL_FLAG_INFERRED) == |
| (DL_FLAG_SYNC_STATE_ONLY | DL_FLAG_MANAGED)) |
| continue; |
| device_reorder_to_tail(link->consumer, NULL); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * device_pm_move_to_tail - Move set of devices to the end of device lists |
| * @dev: Device to move |
| * |
| * This is a device_reorder_to_tail() wrapper taking the requisite locks. |
| * |
| * It moves the @dev along with all of its children and all of its consumers |
| * to the ends of the device_kset and dpm_list, recursively. |
| */ |
| void device_pm_move_to_tail(struct device *dev) |
| { |
| int idx; |
| |
| idx = device_links_read_lock(); |
| device_pm_lock(); |
| device_reorder_to_tail(dev, NULL); |
| device_pm_unlock(); |
| device_links_read_unlock(idx); |
| } |
| |
| #define to_devlink(dev) container_of((dev), struct device_link, link_dev) |
| |
| static ssize_t status_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const char *output; |
| |
| switch (to_devlink(dev)->status) { |
| case DL_STATE_NONE: |
| output = "not tracked"; |
| break; |
| case DL_STATE_DORMANT: |
| output = "dormant"; |
| break; |
| case DL_STATE_AVAILABLE: |
| output = "available"; |
| break; |
| case DL_STATE_CONSUMER_PROBE: |
| output = "consumer probing"; |
| break; |
| case DL_STATE_ACTIVE: |
| output = "active"; |
| break; |
| case DL_STATE_SUPPLIER_UNBIND: |
| output = "supplier unbinding"; |
| break; |
| default: |
| output = "unknown"; |
| break; |
| } |
| |
| return sysfs_emit(buf, "%s\n", output); |
| } |
| static DEVICE_ATTR_RO(status); |
| |
| static ssize_t auto_remove_on_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct device_link *link = to_devlink(dev); |
| const char *output; |
| |
| if (link->flags & DL_FLAG_AUTOREMOVE_SUPPLIER) |
| output = "supplier unbind"; |
| else if (link->flags & DL_FLAG_AUTOREMOVE_CONSUMER) |
| output = "consumer unbind"; |
| else |
| output = "never"; |
| |
| return sysfs_emit(buf, "%s\n", output); |
| } |
| static DEVICE_ATTR_RO(auto_remove_on); |
| |
| static ssize_t runtime_pm_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct device_link *link = to_devlink(dev); |
| |
| return sysfs_emit(buf, "%d\n", !!(link->flags & DL_FLAG_PM_RUNTIME)); |
| } |
| static DEVICE_ATTR_RO(runtime_pm); |
| |
| static ssize_t sync_state_only_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct device_link *link = to_devlink(dev); |
| |
| return sysfs_emit(buf, "%d\n", |
| !!(link->flags & DL_FLAG_SYNC_STATE_ONLY)); |
| } |
| static DEVICE_ATTR_RO(sync_state_only); |
| |
| static struct attribute *devlink_attrs[] = { |
| &dev_attr_status.attr, |
| &dev_attr_auto_remove_on.attr, |
| &dev_attr_runtime_pm.attr, |
| &dev_attr_sync_state_only.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(devlink); |
| |
| static void device_link_release_fn(struct work_struct *work) |
| { |
| struct device_link *link = container_of(work, struct device_link, rm_work); |
| |
| /* Ensure that all references to the link object have been dropped. */ |
| device_link_synchronize_removal(); |
| |
| pm_runtime_release_supplier(link); |
| pm_request_idle(link->supplier); |
| |
| put_device(link->consumer); |
| put_device(link->supplier); |
| kfree(link); |
| } |
| |
| static void devlink_dev_release(struct device *dev) |
| { |
| struct device_link *link = to_devlink(dev); |
| |
| INIT_WORK(&link->rm_work, device_link_release_fn); |
| /* |
| * It may take a while to complete this work because of the SRCU |
| * synchronization in device_link_release_fn() and if the consumer or |
| * supplier devices get deleted when it runs, so put it into the |
| * dedicated workqueue. |
| */ |
| queue_work(device_link_wq, &link->rm_work); |
| } |
| |
| /** |
| * device_link_wait_removal - Wait for ongoing devlink removal jobs to terminate |
| */ |
| void device_link_wait_removal(void) |
| { |
| /* |
| * devlink removal jobs are queued in the dedicated work queue. |
| * To be sure that all removal jobs are terminated, ensure that any |
| * scheduled work has run to completion. |
| */ |
| flush_workqueue(device_link_wq); |
| } |
| EXPORT_SYMBOL_GPL(device_link_wait_removal); |
| |
| static struct class devlink_class = { |
| .name = "devlink", |
| .owner = THIS_MODULE, |
| .dev_groups = devlink_groups, |
| .dev_release = devlink_dev_release, |
| }; |
| |
| static int devlink_add_symlinks(struct device *dev, |
| struct class_interface *class_intf) |
| { |
| int ret; |
| size_t len; |
| struct device_link *link = to_devlink(dev); |
| struct device *sup = link->supplier; |
| struct device *con = link->consumer; |
| char *buf; |
| |
| len = max(strlen(dev_bus_name(sup)) + strlen(dev_name(sup)), |
| strlen(dev_bus_name(con)) + strlen(dev_name(con))); |
| len += strlen(":"); |
| len += strlen("supplier:") + 1; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = sysfs_create_link(&link->link_dev.kobj, &sup->kobj, "supplier"); |
| if (ret) |
| goto out; |
| |
| ret = sysfs_create_link(&link->link_dev.kobj, &con->kobj, "consumer"); |
| if (ret) |
| goto err_con; |
| |
| snprintf(buf, len, "consumer:%s:%s", dev_bus_name(con), dev_name(con)); |
| ret = sysfs_create_link(&sup->kobj, &link->link_dev.kobj, buf); |
| if (ret) |
| goto err_con_dev; |
| |
| snprintf(buf, len, "supplier:%s:%s", dev_bus_name(sup), dev_name(sup)); |
| ret = sysfs_create_link(&con->kobj, &link->link_dev.kobj, buf); |
| if (ret) |
| goto err_sup_dev; |
| |
| goto out; |
| |
| err_sup_dev: |
| snprintf(buf, len, "consumer:%s:%s", dev_bus_name(con), dev_name(con)); |
| sysfs_remove_link(&sup->kobj, buf); |
| err_con_dev: |
| sysfs_remove_link(&link->link_dev.kobj, "consumer"); |
| err_con: |
| sysfs_remove_link(&link->link_dev.kobj, "supplier"); |
| out: |
| kfree(buf); |
| return ret; |
| } |
| |
| static void devlink_remove_symlinks(struct device *dev, |
| struct class_interface *class_intf) |
| { |
| struct device_link *link = to_devlink(dev); |
| size_t len; |
| struct device *sup = link->supplier; |
| struct device *con = link->consumer; |
| char *buf; |
| |
| sysfs_remove_link(&link->link_dev.kobj, "consumer"); |
| sysfs_remove_link(&link->link_dev.kobj, "supplier"); |
| |
| len = max(strlen(dev_bus_name(sup)) + strlen(dev_name(sup)), |
| strlen(dev_bus_name(con)) + strlen(dev_name(con))); |
| len += strlen(":"); |
| len += strlen("supplier:") + 1; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) { |
| WARN(1, "Unable to properly free device link symlinks!\n"); |
| return; |
| } |
| |
| if (device_is_registered(con)) { |
| snprintf(buf, len, "supplier:%s:%s", dev_bus_name(sup), dev_name(sup)); |
| sysfs_remove_link(&con->kobj, buf); |
| } |
| snprintf(buf, len, "consumer:%s:%s", dev_bus_name(con), dev_name(con)); |
| sysfs_remove_link(&sup->kobj, buf); |
| kfree(buf); |
| } |
| |
| static struct class_interface devlink_class_intf = { |
| .class = &devlink_class, |
| .add_dev = devlink_add_symlinks, |
| .remove_dev = devlink_remove_symlinks, |
| }; |
| |
| static int __init devlink_class_init(void) |
| { |
| int ret; |
| |
| ret = class_register(&devlink_class); |
| if (ret) |
| return ret; |
| |
| ret = class_interface_register(&devlink_class_intf); |
| if (ret) |
| class_unregister(&devlink_class); |
| |
| return ret; |
| } |
| postcore_initcall(devlink_class_init); |
| |
| #define DL_MANAGED_LINK_FLAGS (DL_FLAG_AUTOREMOVE_CONSUMER | \ |
| DL_FLAG_AUTOREMOVE_SUPPLIER | \ |
| DL_FLAG_AUTOPROBE_CONSUMER | \ |
| DL_FLAG_SYNC_STATE_ONLY | \ |
| DL_FLAG_INFERRED) |
| |
| #define DL_ADD_VALID_FLAGS (DL_MANAGED_LINK_FLAGS | DL_FLAG_STATELESS | \ |
| DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE) |
| |
| /** |
| * device_link_add - Create a link between two devices. |
| * @consumer: Consumer end of the link. |
| * @supplier: Supplier end of the link. |
| * @flags: Link flags. |
| * |
| * The caller is responsible for the proper synchronization of the link creation |
| * with runtime PM. First, setting the DL_FLAG_PM_RUNTIME flag will cause the |
| * runtime PM framework to take the link into account. Second, if the |
| * DL_FLAG_RPM_ACTIVE flag is set in addition to it, the supplier devices will |
| * be forced into the active metastate and reference-counted upon the creation |
| * of the link. If DL_FLAG_PM_RUNTIME is not set, DL_FLAG_RPM_ACTIVE will be |
| * ignored. |
| * |
| * If DL_FLAG_STATELESS is set in @flags, the caller of this function is |
| * expected to release the link returned by it directly with the help of either |
| * device_link_del() or device_link_remove(). |
| * |
| * If that flag is not set, however, the caller of this function is handing the |
| * management of the link over to the driver core entirely and its return value |
| * can only be used to check whether or not the link is present. In that case, |
| * the DL_FLAG_AUTOREMOVE_CONSUMER and DL_FLAG_AUTOREMOVE_SUPPLIER device link |
| * flags can be used to indicate to the driver core when the link can be safely |
| * deleted. Namely, setting one of them in @flags indicates to the driver core |
| * that the link is not going to be used (by the given caller of this function) |
| * after unbinding the consumer or supplier driver, respectively, from its |
| * device, so the link can be deleted at that point. If none of them is set, |
| * the link will be maintained until one of the devices pointed to by it (either |
| * the consumer or the supplier) is unregistered. |
| * |
| * Also, if DL_FLAG_STATELESS, DL_FLAG_AUTOREMOVE_CONSUMER and |
| * DL_FLAG_AUTOREMOVE_SUPPLIER are not set in @flags (that is, a persistent |
| * managed device link is being added), the DL_FLAG_AUTOPROBE_CONSUMER flag can |
| * be used to request the driver core to automaticall probe for a consmer |
| * driver after successfully binding a driver to the supplier device. |
| * |
| * The combination of DL_FLAG_STATELESS and one of DL_FLAG_AUTOREMOVE_CONSUMER, |
| * DL_FLAG_AUTOREMOVE_SUPPLIER, or DL_FLAG_AUTOPROBE_CONSUMER set in @flags at |
| * the same time is invalid and will cause NULL to be returned upfront. |
| * However, if a device link between the given @consumer and @supplier pair |
| * exists already when this function is called for them, the existing link will |
| * be returned regardless of its current type and status (the link's flags may |
| * be modified then). The caller of this function is then expected to treat |
| * the link as though it has just been created, so (in particular) if |
| * DL_FLAG_STATELESS was passed in @flags, the link needs to be released |
| * explicitly when not needed any more (as stated above). |
| * |
| * A side effect of the link creation is re-ordering of dpm_list and the |
| * devices_kset list by moving the consumer device and all devices depending |
| * on it to the ends of these lists (that does not happen to devices that have |
| * not been registered when this function is called). |
| * |
| * The supplier device is required to be registered when this function is called |
| * and NULL will be returned if that is not the case. The consumer device need |
| * not be registered, however. |
| */ |
| struct device_link *device_link_add(struct device *consumer, |
| struct device *supplier, u32 flags) |
| { |
| struct device_link *link; |
| |
| if (!consumer || !supplier || consumer == supplier || |
| flags & ~DL_ADD_VALID_FLAGS || |
| (flags & DL_FLAG_STATELESS && flags & DL_MANAGED_LINK_FLAGS) || |
| (flags & DL_FLAG_SYNC_STATE_ONLY && |
| (flags & ~DL_FLAG_INFERRED) != DL_FLAG_SYNC_STATE_ONLY) || |
| (flags & DL_FLAG_AUTOPROBE_CONSUMER && |
| flags & (DL_FLAG_AUTOREMOVE_CONSUMER | |
| DL_FLAG_AUTOREMOVE_SUPPLIER))) |
| return NULL; |
| |
| if (flags & DL_FLAG_PM_RUNTIME && flags & DL_FLAG_RPM_ACTIVE) { |
| if (pm_runtime_get_sync(supplier) < 0) { |
| pm_runtime_put_noidle(supplier); |
| return NULL; |
| } |
| } |
| |
| if (!(flags & DL_FLAG_STATELESS)) |
| flags |= DL_FLAG_MANAGED; |
| |
| device_links_write_lock(); |
| device_pm_lock(); |
| |
| /* |
| * If the supplier has not been fully registered yet or there is a |
| * reverse (non-SYNC_STATE_ONLY) dependency between the consumer and |
| * the supplier already in the graph, return NULL. If the link is a |
| * SYNC_STATE_ONLY link, we don't check for reverse dependencies |
| * because it only affects sync_state() callbacks. |
| */ |
| if (!device_pm_initialized(supplier) |
| || (!(flags & DL_FLAG_SYNC_STATE_ONLY) && |
| device_is_dependent(consumer, supplier))) { |
| link = NULL; |
| goto out; |
| } |
| |
| /* |
| * SYNC_STATE_ONLY links are useless once a consumer device has probed. |
| * So, only create it if the consumer hasn't probed yet. |
| */ |
| if (flags & DL_FLAG_SYNC_STATE_ONLY && |
| consumer->links.status != DL_DEV_NO_DRIVER && |
| consumer->links.status != DL_DEV_PROBING) { |
| link = NULL; |
| goto out; |
| } |
| |
| /* |
| * DL_FLAG_AUTOREMOVE_SUPPLIER indicates that the link will be needed |
| * longer than for DL_FLAG_AUTOREMOVE_CONSUMER and setting them both |
| * together doesn't make sense, so prefer DL_FLAG_AUTOREMOVE_SUPPLIER. |
| */ |
| if (flags & DL_FLAG_AUTOREMOVE_SUPPLIER) |
| flags &= ~DL_FLAG_AUTOREMOVE_CONSUMER; |
| |
| list_for_each_entry(link, &supplier->links.consumers, s_node) { |
| if (link->consumer != consumer) |
| continue; |
| |
| if (link->flags & DL_FLAG_INFERRED && |
| !(flags & DL_FLAG_INFERRED)) |
| link->flags &= ~DL_FLAG_INFERRED; |
| |
| if (flags & DL_FLAG_PM_RUNTIME) { |
| if (!(link->flags & DL_FLAG_PM_RUNTIME)) { |
| pm_runtime_new_link(consumer); |
| link->flags |= DL_FLAG_PM_RUNTIME; |
| } |
| if (flags & DL_FLAG_RPM_ACTIVE) |
| refcount_inc(&link->rpm_active); |
| } |
| |
| if (flags & DL_FLAG_STATELESS) { |
| kref_get(&link->kref); |
| if (link->flags & DL_FLAG_SYNC_STATE_ONLY && |
| !(link->flags & DL_FLAG_STATELESS)) { |
| link->flags |= DL_FLAG_STATELESS; |
| goto reorder; |
| } else { |
| link->flags |= DL_FLAG_STATELESS; |
| goto out; |
| } |
| } |
| |
| /* |
| * If the life time of the link following from the new flags is |
| * longer than indicated by the flags of the existing link, |
| * update the existing link to stay around longer. |
| */ |
| if (flags & DL_FLAG_AUTOREMOVE_SUPPLIER) { |
| if (link->flags & DL_FLAG_AUTOREMOVE_CONSUMER) { |
| link->flags &= ~DL_FLAG_AUTOREMOVE_CONSUMER; |
| link->flags |= DL_FLAG_AUTOREMOVE_SUPPLIER; |
| } |
| } else if (!(flags & DL_FLAG_AUTOREMOVE_CONSUMER)) { |
| link->flags &= ~(DL_FLAG_AUTOREMOVE_CONSUMER | |
| DL_FLAG_AUTOREMOVE_SUPPLIER); |
| } |
| if (!(link->flags & DL_FLAG_MANAGED)) { |
| kref_get(&link->kref); |
| link->flags |= DL_FLAG_MANAGED; |
| device_link_init_status(link, consumer, supplier); |
| } |
| if (link->flags & DL_FLAG_SYNC_STATE_ONLY && |
| !(flags & DL_FLAG_SYNC_STATE_ONLY)) { |
| link->flags &= ~DL_FLAG_SYNC_STATE_ONLY; |
| goto reorder; |
| } |
| |
| goto out; |
| } |
| |
| link = kzalloc(sizeof(*link), GFP_KERNEL); |
| if (!link) |
| goto out; |
| |
| refcount_set(&link->rpm_active, 1); |
| |
| get_device(supplier); |
| link->supplier = supplier; |
| INIT_LIST_HEAD(&link->s_node); |
| get_device(consumer); |
| link->consumer = consumer; |
| INIT_LIST_HEAD(&link->c_node); |
| link->flags = flags; |
| kref_init(&link->kref); |
| |
| link->link_dev.class = &devlink_class; |
| device_set_pm_not_required(&link->link_dev); |
| dev_set_name(&link->link_dev, "%s:%s--%s:%s", |
| dev_bus_name(supplier), dev_name(supplier), |
| dev_bus_name(consumer), dev_name(consumer)); |
| if (device_register(&link->link_dev)) { |
| put_device(&link->link_dev); |
| link = NULL; |
| goto out; |
| } |
| |
| if (flags & DL_FLAG_PM_RUNTIME) { |
| if (flags & DL_FLAG_RPM_ACTIVE) |
| refcount_inc(&link->rpm_active); |
| |
| pm_runtime_new_link(consumer); |
| } |
| |
| /* Determine the initial link state. */ |
| if (flags & DL_FLAG_STATELESS) |
| link->status = DL_STATE_NONE; |
| else |
| device_link_init_status(link, consumer, supplier); |
| |
| /* |
| * Some callers expect the link creation during consumer driver probe to |
| * resume the supplier even without DL_FLAG_RPM_ACTIVE. |
| */ |
| if (link->status == DL_STATE_CONSUMER_PROBE && |
| flags & DL_FLAG_PM_RUNTIME) |
| pm_runtime_resume(supplier); |
| |
| list_add_tail_rcu(&link->s_node, &supplier->links.consumers); |
| list_add_tail_rcu(&link->c_node, &consumer->links.suppliers); |
| |
| if (flags & DL_FLAG_SYNC_STATE_ONLY) { |
| dev_dbg(consumer, |
| "Linked as a sync state only consumer to %s\n", |
| dev_name(supplier)); |
| goto out; |
| } |
| |
| reorder: |
| /* |
| * Move the consumer and all of the devices depending on it to the end |
| * of dpm_list and the devices_kset list. |
| * |
| * It is necessary to hold dpm_list locked throughout all that or else |
| * we may end up suspending with a wrong ordering of it. |
| */ |
| device_reorder_to_tail(consumer, NULL); |
| |
| dev_dbg(consumer, "Linked as a consumer to %s\n", dev_name(supplier)); |
| |
| out: |
| device_pm_unlock(); |
| device_links_write_unlock(); |
| |
| if ((flags & DL_FLAG_PM_RUNTIME && flags & DL_FLAG_RPM_ACTIVE) && !link) |
| pm_runtime_put(supplier); |
| |
| return link; |
| } |
| EXPORT_SYMBOL_GPL(device_link_add); |
| |
| static void __device_link_del(struct kref *kref) |
| { |
| struct device_link *link = container_of(kref, struct device_link, kref); |
| |
| dev_dbg(link->consumer, "Dropping the link to %s\n", |
| dev_name(link->supplier)); |
| |
| pm_runtime_drop_link(link); |
| |
| device_link_remove_from_lists(link); |
| device_unregister(&link->link_dev); |
| } |
| |
| static void device_link_put_kref(struct device_link *link) |
| { |
| if (link->flags & DL_FLAG_STATELESS) |
| kref_put(&link->kref, __device_link_del); |
| else if (!device_is_registered(link->consumer)) |
| __device_link_del(&link->kref); |
| else |
| WARN(1, "Unable to drop a managed device link reference\n"); |
| } |
| |
| /** |
| * device_link_del - Delete a stateless link between two devices. |
| * @link: Device link to delete. |
| * |
| * The caller must ensure proper synchronization of this function with runtime |
| * PM. If the link was added multiple times, it needs to be deleted as often. |
| * Care is required for hotplugged devices: Their links are purged on removal |
| * and calling device_link_del() is then no longer allowed. |
| */ |
| void device_link_del(struct device_link *link) |
| { |
| device_links_write_lock(); |
| device_link_put_kref(link); |
| device_links_write_unlock(); |
| } |
| EXPORT_SYMBOL_GPL(device_link_del); |
| |
| /** |
| * device_link_remove - Delete a stateless link between two devices. |
| * @consumer: Consumer end of the link. |
| * @supplier: Supplier end of the link. |
| * |
| * The caller must ensure proper synchronization of this function with runtime |
| * PM. |
| */ |
| void device_link_remove(void *consumer, struct device *supplier) |
| { |
| struct device_link *link; |
| |
| if (WARN_ON(consumer == supplier)) |
| return; |
| |
| device_links_write_lock(); |
| |
| list_for_each_entry(link, &supplier->links.consumers, s_node) { |
| if (link->consumer == consumer) { |
| device_link_put_kref(link); |
| break; |
| } |
| } |
| |
| device_links_write_unlock(); |
| } |
| EXPORT_SYMBOL_GPL(device_link_remove); |
| |
| static void device_links_missing_supplier(struct device *dev) |
| { |
| struct device_link *link; |
| |
| list_for_each_entry(link, &dev->links.suppliers, c_node) { |
| if (link->status != DL_STATE_CONSUMER_PROBE) |
| continue; |
| |
| if (link->supplier->links.status == DL_DEV_DRIVER_BOUND) { |
| WRITE_ONCE(link->status, DL_STATE_AVAILABLE); |
| } else { |
| WARN_ON(!(link->flags & DL_FLAG_SYNC_STATE_ONLY)); |
| WRITE_ONCE(link->status, DL_STATE_DORMANT); |
| } |
| } |
| } |
| |
| /** |
| * device_links_check_suppliers - Check presence of supplier drivers. |
| * @dev: Consumer device. |
| * |
| * Check links from this device to any suppliers. Walk the list of the device's |
| * links to suppliers and see if all of them are available. If not, simply |
| * return -EPROBE_DEFER. |
| * |
| * We need to guarantee that the supplier will not go away after the check has |
| * been positive here. It only can go away in __device_release_driver() and |
| * that function checks the device's links to consumers. This means we need to |
| * mark the link as "consumer probe in progress" to make the supplier removal |
| * wait for us to complete (or bad things may happen). |
| * |
| * Links without the DL_FLAG_MANAGED flag set are ignored. |
| */ |
| int device_links_check_suppliers(struct device *dev) |
| { |
| struct device_link *link; |
| int ret = 0; |
| |
| /* |
| * Device waiting for supplier to become available is not allowed to |
| * probe. |
| */ |
| mutex_lock(&fwnode_link_lock); |
| if (dev->fwnode && !list_empty(&dev->fwnode->suppliers) && |
| !fw_devlink_is_permissive()) { |
| dev_dbg(dev, "probe deferral - wait for supplier %pfwP\n", |
| list_first_entry(&dev->fwnode->suppliers, |
| struct fwnode_link, |
| c_hook)->supplier); |
| mutex_unlock(&fwnode_link_lock); |
| return -EPROBE_DEFER; |
| } |
| mutex_unlock(&fwnode_link_lock); |
| |
| device_links_write_lock(); |
| |
| list_for_each_entry(link, &dev->links.suppliers, c_node) { |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| |
| if (link->status != DL_STATE_AVAILABLE && |
| !(link->flags & DL_FLAG_SYNC_STATE_ONLY)) { |
| device_links_missing_supplier(dev); |
| dev_dbg(dev, "probe deferral - supplier %s not ready\n", |
| dev_name(link->supplier)); |
| ret = -EPROBE_DEFER; |
| break; |
| } |
| WRITE_ONCE(link->status, DL_STATE_CONSUMER_PROBE); |
| } |
| dev->links.status = DL_DEV_PROBING; |
| |
| device_links_write_unlock(); |
| return ret; |
| } |
| |
| /** |
| * __device_links_queue_sync_state - Queue a device for sync_state() callback |
| * @dev: Device to call sync_state() on |
| * @list: List head to queue the @dev on |
| * |
| * Queues a device for a sync_state() callback when the device links write lock |
| * isn't held. This allows the sync_state() execution flow to use device links |
| * APIs. The caller must ensure this function is called with |
| * device_links_write_lock() held. |
| * |
| * This function does a get_device() to make sure the device is not freed while |
| * on this list. |
| * |
| * So the caller must also ensure that device_links_flush_sync_list() is called |
| * as soon as the caller releases device_links_write_lock(). This is necessary |
| * to make sure the sync_state() is called in a timely fashion and the |
| * put_device() is called on this device. |
| */ |
| static void __device_links_queue_sync_state(struct device *dev, |
| struct list_head *list) |
| { |
| struct device_link *link; |
| |
| if (!dev_has_sync_state(dev)) |
| return; |
| if (dev->state_synced) |
| return; |
| |
| list_for_each_entry(link, &dev->links.consumers, s_node) { |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| if (link->status != DL_STATE_ACTIVE) |
| return; |
| } |
| |
| /* |
| * Set the flag here to avoid adding the same device to a list more |
| * than once. This can happen if new consumers get added to the device |
| * and probed before the list is flushed. |
| */ |
| dev->state_synced = true; |
| |
| if (WARN_ON(!list_empty(&dev->links.defer_sync))) |
| return; |
| |
| get_device(dev); |
| list_add_tail(&dev->links.defer_sync, list); |
| } |
| |
| /** |
| * device_links_flush_sync_list - Call sync_state() on a list of devices |
| * @list: List of devices to call sync_state() on |
| * @dont_lock_dev: Device for which lock is already held by the caller |
| * |
| * Calls sync_state() on all the devices that have been queued for it. This |
| * function is used in conjunction with __device_links_queue_sync_state(). The |
| * @dont_lock_dev parameter is useful when this function is called from a |
| * context where a device lock is already held. |
| */ |
| static void device_links_flush_sync_list(struct list_head *list, |
| struct device *dont_lock_dev) |
| { |
| struct device *dev, *tmp; |
| |
| list_for_each_entry_safe(dev, tmp, list, links.defer_sync) { |
| list_del_init(&dev->links.defer_sync); |
| |
| if (dev != dont_lock_dev) |
| device_lock(dev); |
| |
| if (dev->bus->sync_state) |
| dev->bus->sync_state(dev); |
| else if (dev->driver && dev->driver->sync_state) |
| dev->driver->sync_state(dev); |
| |
| if (dev != dont_lock_dev) |
| device_unlock(dev); |
| |
| put_device(dev); |
| } |
| } |
| |
| void device_links_supplier_sync_state_pause(void) |
| { |
| device_links_write_lock(); |
| defer_sync_state_count++; |
| device_links_write_unlock(); |
| } |
| |
| void device_links_supplier_sync_state_resume(void) |
| { |
| struct device *dev, *tmp; |
| LIST_HEAD(sync_list); |
| |
| device_links_write_lock(); |
| if (!defer_sync_state_count) { |
| WARN(true, "Unmatched sync_state pause/resume!"); |
| goto out; |
| } |
| defer_sync_state_count--; |
| if (defer_sync_state_count) |
| goto out; |
| |
| list_for_each_entry_safe(dev, tmp, &deferred_sync, links.defer_sync) { |
| /* |
| * Delete from deferred_sync list before queuing it to |
| * sync_list because defer_sync is used for both lists. |
| */ |
| list_del_init(&dev->links.defer_sync); |
| __device_links_queue_sync_state(dev, &sync_list); |
| } |
| out: |
| device_links_write_unlock(); |
| |
| device_links_flush_sync_list(&sync_list, NULL); |
| } |
| |
| static int sync_state_resume_initcall(void) |
| { |
| device_links_supplier_sync_state_resume(); |
| return 0; |
| } |
| late_initcall(sync_state_resume_initcall); |
| |
| static void __device_links_supplier_defer_sync(struct device *sup) |
| { |
| if (list_empty(&sup->links.defer_sync) && dev_has_sync_state(sup)) |
| list_add_tail(&sup->links.defer_sync, &deferred_sync); |
| } |
| |
| static void device_link_drop_managed(struct device_link *link) |
| { |
| link->flags &= ~DL_FLAG_MANAGED; |
| WRITE_ONCE(link->status, DL_STATE_NONE); |
| kref_put(&link->kref, __device_link_del); |
| } |
| |
| static ssize_t waiting_for_supplier_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| bool val; |
| |
| device_lock(dev); |
| val = !list_empty(&dev->fwnode->suppliers); |
| device_unlock(dev); |
| return sysfs_emit(buf, "%u\n", val); |
| } |
| static DEVICE_ATTR_RO(waiting_for_supplier); |
| |
| /** |
| * device_links_driver_bound - Update device links after probing its driver. |
| * @dev: Device to update the links for. |
| * |
| * The probe has been successful, so update links from this device to any |
| * consumers by changing their status to "available". |
| * |
| * Also change the status of @dev's links to suppliers to "active". |
| * |
| * Links without the DL_FLAG_MANAGED flag set are ignored. |
| */ |
| void device_links_driver_bound(struct device *dev) |
| { |
| struct device_link *link, *ln; |
| LIST_HEAD(sync_list); |
| |
| /* |
| * If a device binds successfully, it's expected to have created all |
| * the device links it needs to or make new device links as it needs |
| * them. So, fw_devlink no longer needs to create device links to any |
| * of the device's suppliers. |
| * |
| * Also, if a child firmware node of this bound device is not added as |
| * a device by now, assume it is never going to be added and make sure |
| * other devices don't defer probe indefinitely by waiting for such a |
| * child device. |
| */ |
| if (dev->fwnode && dev->fwnode->dev == dev) { |
| struct fwnode_handle *child; |
| fwnode_links_purge_suppliers(dev->fwnode); |
| fwnode_for_each_available_child_node(dev->fwnode, child) |
| fw_devlink_purge_absent_suppliers(child); |
| } |
| device_remove_file(dev, &dev_attr_waiting_for_supplier); |
| |
| device_links_write_lock(); |
| |
| list_for_each_entry(link, &dev->links.consumers, s_node) { |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| |
| /* |
| * Links created during consumer probe may be in the "consumer |
| * probe" state to start with if the supplier is still probing |
| * when they are created and they may become "active" if the |
| * consumer probe returns first. Skip them here. |
| */ |
| if (link->status == DL_STATE_CONSUMER_PROBE || |
| link->status == DL_STATE_ACTIVE) |
| continue; |
| |
| WARN_ON(link->status != DL_STATE_DORMANT); |
| WRITE_ONCE(link->status, DL_STATE_AVAILABLE); |
| |
| if (link->flags & DL_FLAG_AUTOPROBE_CONSUMER) |
| driver_deferred_probe_add(link->consumer); |
| } |
| |
| if (defer_sync_state_count) |
| __device_links_supplier_defer_sync(dev); |
| else |
| __device_links_queue_sync_state(dev, &sync_list); |
| |
| list_for_each_entry_safe(link, ln, &dev->links.suppliers, c_node) { |
| struct device *supplier; |
| |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| |
| supplier = link->supplier; |
| if (link->flags & DL_FLAG_SYNC_STATE_ONLY) { |
| /* |
| * When DL_FLAG_SYNC_STATE_ONLY is set, it means no |
| * other DL_MANAGED_LINK_FLAGS have been set. So, it's |
| * save to drop the managed link completely. |
| */ |
| device_link_drop_managed(link); |
| } else { |
| WARN_ON(link->status != DL_STATE_CONSUMER_PROBE); |
| WRITE_ONCE(link->status, DL_STATE_ACTIVE); |
| } |
| |
| /* |
| * This needs to be done even for the deleted |
| * DL_FLAG_SYNC_STATE_ONLY device link in case it was the last |
| * device link that was preventing the supplier from getting a |
| * sync_state() call. |
| */ |
| if (defer_sync_state_count) |
| __device_links_supplier_defer_sync(supplier); |
| else |
| __device_links_queue_sync_state(supplier, &sync_list); |
| } |
| |
| dev->links.status = DL_DEV_DRIVER_BOUND; |
| |
| device_links_write_unlock(); |
| |
| device_links_flush_sync_list(&sync_list, dev); |
| } |
| |
| /** |
| * __device_links_no_driver - Update links of a device without a driver. |
| * @dev: Device without a drvier. |
| * |
| * Delete all non-persistent links from this device to any suppliers. |
| * |
| * Persistent links stay around, but their status is changed to "available", |
| * unless they already are in the "supplier unbind in progress" state in which |
| * case they need not be updated. |
| * |
| * Links without the DL_FLAG_MANAGED flag set are ignored. |
| */ |
| static void __device_links_no_driver(struct device *dev) |
| { |
| struct device_link *link, *ln; |
| |
| list_for_each_entry_safe_reverse(link, ln, &dev->links.suppliers, c_node) { |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| |
| if (link->flags & DL_FLAG_AUTOREMOVE_CONSUMER) { |
| device_link_drop_managed(link); |
| continue; |
| } |
| |
| if (link->status != DL_STATE_CONSUMER_PROBE && |
| link->status != DL_STATE_ACTIVE) |
| continue; |
| |
| if (link->supplier->links.status == DL_DEV_DRIVER_BOUND) { |
| WRITE_ONCE(link->status, DL_STATE_AVAILABLE); |
| } else { |
| WARN_ON(!(link->flags & DL_FLAG_SYNC_STATE_ONLY)); |
| WRITE_ONCE(link->status, DL_STATE_DORMANT); |
| } |
| } |
| |
| dev->links.status = DL_DEV_NO_DRIVER; |
| } |
| |
| /** |
| * device_links_no_driver - Update links after failing driver probe. |
| * @dev: Device whose driver has just failed to probe. |
| * |
| * Clean up leftover links to consumers for @dev and invoke |
| * %__device_links_no_driver() to update links to suppliers for it as |
| * appropriate. |
| * |
| * Links without the DL_FLAG_MANAGED flag set are ignored. |
| */ |
| void device_links_no_driver(struct device *dev) |
| { |
| struct device_link *link; |
| |
| device_links_write_lock(); |
| |
| list_for_each_entry(link, &dev->links.consumers, s_node) { |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| |
| /* |
| * The probe has failed, so if the status of the link is |
| * "consumer probe" or "active", it must have been added by |
| * a probing consumer while this device was still probing. |
| * Change its state to "dormant", as it represents a valid |
| * relationship, but it is not functionally meaningful. |
| */ |
| if (link->status == DL_STATE_CONSUMER_PROBE || |
| link->status == DL_STATE_ACTIVE) |
| WRITE_ONCE(link->status, DL_STATE_DORMANT); |
| } |
| |
| __device_links_no_driver(dev); |
| |
| device_links_write_unlock(); |
| } |
| |
| /** |
| * device_links_driver_cleanup - Update links after driver removal. |
| * @dev: Device whose driver has just gone away. |
| * |
| * Update links to consumers for @dev by changing their status to "dormant" and |
| * invoke %__device_links_no_driver() to update links to suppliers for it as |
| * appropriate. |
| * |
| * Links without the DL_FLAG_MANAGED flag set are ignored. |
| */ |
| void device_links_driver_cleanup(struct device *dev) |
| { |
| struct device_link *link, *ln; |
| |
| device_links_write_lock(); |
| |
| list_for_each_entry_safe(link, ln, &dev->links.consumers, s_node) { |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| |
| WARN_ON(link->flags & DL_FLAG_AUTOREMOVE_CONSUMER); |
| WARN_ON(link->status != DL_STATE_SUPPLIER_UNBIND); |
| |
| /* |
| * autoremove the links between this @dev and its consumer |
| * devices that are not active, i.e. where the link state |
| * has moved to DL_STATE_SUPPLIER_UNBIND. |
| */ |
| if (link->status == DL_STATE_SUPPLIER_UNBIND && |
| link->flags & DL_FLAG_AUTOREMOVE_SUPPLIER) |
| device_link_drop_managed(link); |
| |
| WRITE_ONCE(link->status, DL_STATE_DORMANT); |
| } |
| |
| list_del_init(&dev->links.defer_sync); |
| __device_links_no_driver(dev); |
| |
| device_links_write_unlock(); |
| } |
| |
| /** |
| * device_links_busy - Check if there are any busy links to consumers. |
| * @dev: Device to check. |
| * |
| * Check each consumer of the device and return 'true' if its link's status |
| * is one of "consumer probe" or "active" (meaning that the given consumer is |
| * probing right now or its driver is present). Otherwise, change the link |
| * state to "supplier unbind" to prevent the consumer from being probed |
| * successfully going forward. |
| * |
| * Return 'false' if there are no probing or active consumers. |
| * |
| * Links without the DL_FLAG_MANAGED flag set are ignored. |
| */ |
| bool device_links_busy(struct device *dev) |
| { |
| struct device_link *link; |
| bool ret = false; |
| |
| device_links_write_lock(); |
| |
| list_for_each_entry(link, &dev->links.consumers, s_node) { |
| if (!(link->flags & DL_FLAG_MANAGED)) |
| continue; |
| |
| if (link->status == DL_STATE_CONSUMER_PROBE |
| || link->status == DL_STATE_ACTIVE) { |
| ret = true; |
| break; |
| } |
| WRITE_ONCE(link->status, DL_STATE_SUPPLIER_UNBIND); |
| } |
| |
| dev->links.status = DL_DEV_UNBINDING; |
| |
| device_links_write_unlock(); |
| return ret; |
| } |
| |
| /** |
| * device_links_unbind_consumers - Force unbind consumers of the given device. |
| * @dev: Device to unbind the consumers of. |
| * |
| * Walk the list of links to consumers for @dev and if any of them is in the |
| * "consumer probe" state, wait for all device probes in progress to complete |
| * and start over. |
| * |
| * If that's not the case, change the status of the link to "supplier unbind" |
| * and check if the link was in the "active" state. If so, force the consumer |
| * driver to unbind and start over (the consumer will not re-probe as we have |
| * changed the state of the link already). |
| * |
| * Links without the DL_FLAG_MANAGED flag set are ignored. |
| */ |
| void device_links_unbind_consumers(struct device *dev) |
| { |
| struct device_link *link; |
| |
| start: |
| device_links_write_lock(); |
| |
| list_for_each_entry(link, &dev->links.consumers, s_node) { |
| enum device_link_state status; |
| |
| if (!(link->flags & DL_FLAG_MANAGED) || |
| link->flags & DL_FLAG_SYNC_STATE_ONLY) |
| continue; |
| |
| status = link->status; |
| if (status == DL_STATE_CONSUMER_PROBE) { |
| device_links_write_unlock(); |
| |
| wait_for_device_probe(); |
| goto start; |
| } |
| WRITE_ONCE(link->status, DL_STATE_SUPPLIER_UNBIND); |
| if (status == DL_STATE_ACTIVE) { |
| struct device *consumer = link->consumer; |
| |
| get_device(consumer); |
| |
| device_links_write_unlock(); |
| |
| device_release_driver_internal(consumer, NULL, |
| consumer->parent); |
| put_device(consumer); |
| goto start; |
| } |
| } |
| |
| device_links_write_unlock(); |
| } |
| |
| /** |
| * device_links_purge - Delete existing links to other devices. |
| * @dev: Target device. |
| */ |
| static void device_links_purge(struct device *dev) |
| { |
| struct device_link *link, *ln; |
| |
| if (dev->class == &devlink_class) |
| return; |
| |
| /* |
| * Delete all of the remaining links from this device to any other |
| * devices (either consumers or suppliers). |
| */ |
| device_links_write_lock(); |
| |
| list_for_each_entry_safe_reverse(link, ln, &dev->links.suppliers, c_node) { |
| WARN_ON(link->status == DL_STATE_ACTIVE); |
| __device_link_del(&link->kref); |
| } |
| |
| list_for_each_entry_safe_reverse(link, ln, &dev->links.consumers, s_node) { |
| WARN_ON(link->status != DL_STATE_DORMANT && |
| link->status != DL_STATE_NONE); |
| __device_link_del(&link->kref); |
| } |
| |
| device_links_write_unlock(); |
| } |
| |
| #define FW_DEVLINK_FLAGS_PERMISSIVE (DL_FLAG_INFERRED | \ |
| DL_FLAG_SYNC_STATE_ONLY) |
| #define FW_DEVLINK_FLAGS_ON (DL_FLAG_INFERRED | \ |
| DL_FLAG_AUTOPROBE_CONSUMER) |
| #define FW_DEVLINK_FLAGS_RPM (FW_DEVLINK_FLAGS_ON | \ |
| DL_FLAG_PM_RUNTIME) |
| |
| static u32 fw_devlink_flags = FW_DEVLINK_FLAGS_ON; |
| static int __init fw_devlink_setup(char *arg) |
| { |
| if (!arg) |
| return -EINVAL; |
| |
| if (strcmp(arg, "off") == 0) { |
| fw_devlink_flags = 0; |
| } else if (strcmp(arg, "permissive") == 0) { |
| fw_devlink_flags = FW_DEVLINK_FLAGS_PERMISSIVE; |
| } else if (strcmp(arg, "on") == 0) { |
| fw_devlink_flags = FW_DEVLINK_FLAGS_ON; |
| } else if (strcmp(arg, "rpm") == 0) { |
| fw_devlink_flags = FW_DEVLINK_FLAGS_RPM; |
| } |
| return 0; |
| } |
| early_param("fw_devlink", fw_devlink_setup); |
| |
| static bool fw_devlink_strict = true; |
| static int __init fw_devlink_strict_setup(char *arg) |
| { |
| return strtobool(arg, &fw_devlink_strict); |
| } |
| early_param("fw_devlink.strict", fw_devlink_strict_setup); |
| |
| u32 fw_devlink_get_flags(void) |
| { |
| return fw_devlink_flags; |
| } |
| |
| static bool fw_devlink_is_permissive(void) |
| { |
| return fw_devlink_flags == FW_DEVLINK_FLAGS_PERMISSIVE; |
| } |
| |
| bool fw_devlink_is_strict(void) |
| { |
| return fw_devlink_strict && !fw_devlink_is_permissive(); |
| } |
| |
| static void fw_devlink_parse_fwnode(struct fwnode_handle *fwnode) |
| { |
| if (fwnode->flags & FWNODE_FLAG_LINKS_ADDED) |
| return; |
| |
| fwnode_call_int_op(fwnode, add_links); |
| fwnode->flags |= FWNODE_FLAG_LINKS_ADDED; |
| } |
| |
| static void fw_devlink_parse_fwtree(struct fwnode_handle *fwnode) |
| { |
| struct fwnode_handle *child = NULL; |
| |
| fw_devlink_parse_fwnode(fwnode); |
| |
| while ((child = fwnode_get_next_available_child_node(fwnode, child))) |
| fw_devlink_parse_fwtree(child); |
| } |
| |
| /** |
| * fw_devlink_relax_cycle - Convert cyclic links to SYNC_STATE_ONLY links |
| * @con: Device to check dependencies for. |
| * @sup: Device to check against. |
| * |
| * Check if @sup depends on @con or any device dependent on it (its child or |
| * its consumer etc). When such a cyclic dependency is found, convert all |
| * device links created solely by fw_devlink into SYNC_STATE_ONLY device links. |
| * This is the equivalent of doing fw_devlink=permissive just between the |
| * devices in the cycle. We need to do this because, at this point, fw_devlink |
| * can't tell which of these dependencies is not a real dependency. |
| * |
| * Return 1 if a cycle is found. Otherwise, return 0. |
| */ |
| int fw_devlink_relax_cycle(struct device *con, void *sup) |
| { |
| struct device_link *link; |
| int ret; |
| |
| if (con == sup) |
| return 1; |
| |
| ret = device_for_each_child(con, sup, fw_devlink_relax_cycle); |
| if (ret) |
| return ret; |
| |
| list_for_each_entry(link, &con->links.consumers, s_node) { |
| if ((link->flags & ~DL_FLAG_INFERRED) == |
| (DL_FLAG_SYNC_STATE_ONLY | DL_FLAG_MANAGED)) |
| continue; |
| |
| if (!fw_devlink_relax_cycle(link->consumer, sup)) |
| continue; |
| |
| ret = 1; |
| |
| if (!(link->flags & DL_FLAG_INFERRED)) |
| continue; |
| |
| pm_runtime_drop_link(link); |
| link->flags = DL_FLAG_MANAGED | FW_DEVLINK_FLAGS_PERMISSIVE; |
| dev_dbg(link->consumer, "Relaxing link with %s\n", |
| dev_name(link->supplier)); |
| } |
| return ret; |
| } |
| |
| /** |
| * fw_devlink_create_devlink - Create a device link from a consumer to fwnode |
| * @con - Consumer device for the device link |
| * @sup_handle - fwnode handle of supplier |
| * |
| * This function will try to create a device link between the consumer device |
| * @con and the supplier device represented by @sup_handle. |
| * |
| * The supplier has to be provided as a fwnode because incorrect cycles in |
| * fwnode links can sometimes cause the supplier device to never be created. |
| * This function detects such cases and returns an error if it cannot create a |
| * device link from the consumer to a missing supplier. |
| * |
| * Returns, |
| * 0 on successfully creating a device link |
| * -EINVAL if the device link cannot be created as expected |
| * -EAGAIN if the device link cannot be created right now, but it may be |
| * possible to do that in the future |
| */ |
| static int fw_devlink_create_devlink(struct device *con, |
| struct fwnode_handle *sup_handle, u32 flags) |
| { |
| struct device *sup_dev; |
| int ret = 0; |
| |
| sup_dev = get_dev_from_fwnode(sup_handle); |
| if (sup_dev) { |
| /* |
| * If it's one of those drivers that don't actually bind to |
| * their device using driver core, then don't wait on this |
| * supplier device indefinitely. |
| */ |
| if (sup_dev->links.status == DL_DEV_NO_DRIVER && |
| sup_handle->flags & FWNODE_FLAG_INITIALIZED) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* |
| * If this fails, it is due to cycles in device links. Just |
| * give up on this link and treat it as invalid. |
| */ |
| if (!device_link_add(con, sup_dev, flags) && |
| !(flags & DL_FLAG_SYNC_STATE_ONLY)) { |
| dev_info(con, "Fixing up cyclic dependency with %s\n", |
| dev_name(sup_dev)); |
| device_links_write_lock(); |
| fw_devlink_relax_cycle(con, sup_dev); |
| device_links_write_unlock(); |
| device_link_add(con, sup_dev, |
| FW_DEVLINK_FLAGS_PERMISSIVE); |
| ret = -EINVAL; |
| } |
| |
| goto out; |
| } |
| |
| /* Supplier that's already initialized without a struct device. */ |
| if (sup_handle->flags & FWNODE_FLAG_INITIALIZED) |
| return -EINVAL; |
| |
| /* |
| * DL_FLAG_SYNC_STATE_ONLY doesn't block probing and supports |
| * cycles. So cycle detection isn't necessary and shouldn't be |
| * done. |
| */ |
| if (flags & DL_FLAG_SYNC_STATE_ONLY) |
| return -EAGAIN; |
| |
| /* |
| * If we can't find the supplier device from its fwnode, it might be |
| * due to a cyclic dependency between fwnodes. Some of these cycles can |
| * be broken by applying logic. Check for these types of cycles and |
| * break them so that devices in the cycle probe properly. |
| * |
| * If the supplier's parent is dependent on the consumer, then the |
| * consumer and supplier have a cyclic dependency. Since fw_devlink |
| * can't tell which of the inferred dependencies are incorrect, don't |
| * enforce probe ordering between any of the devices in this cyclic |
| * dependency. Do this by relaxing all the fw_devlink device links in |
| * this cycle and by treating the fwnode link between the consumer and |
| * the supplier as an invalid dependency. |
| */ |
| sup_dev = fwnode_get_next_parent_dev(sup_handle); |
| if (sup_dev && device_is_dependent(con, sup_dev)) { |
| dev_info(con, "Fixing up cyclic dependency with %pfwP (%s)\n", |
| sup_handle, dev_name(sup_dev)); |
| device_links_write_lock(); |
| fw_devlink_relax_cycle(con, sup_dev); |
| device_links_write_unlock(); |
| ret = -EINVAL; |
| } else { |
| /* |
| * Can't check for cycles or no cycles. So let's try |
| * again later. |
| */ |
| ret = -EAGAIN; |
| } |
| |
| out: |
| put_device(sup_dev); |
| return ret; |
| } |
| |
| /** |
| * __fw_devlink_link_to_consumers - Create device links to consumers of a device |
| * @dev - Device that needs to be linked to its consumers |
| * |
| * This function looks at all the consumer fwnodes of @dev and creates device |
| * links between the consumer device and @dev (supplier). |
| * |
| * If the consumer device has not been added yet, then this function creates a |
| * SYNC_STATE_ONLY link between @dev (supplier) and the closest ancestor device |
| * of the consumer fwnode. This is necessary to make sure @dev doesn't get a |
| * sync_state() callback before the real consumer device gets to be added and |
| * then probed. |
| * |
| * Once device links are created from the real consumer to @dev (supplier), the |
| * fwnode links are deleted. |
| */ |
| static void __fw_devlink_link_to_consumers(struct device *dev) |
| { |
| struct fwnode_handle *fwnode = dev->fwnode; |
| struct fwnode_link *link, *tmp; |
| |
| list_for_each_entry_safe(link, tmp, &fwnode->consumers, s_hook) { |
| u32 dl_flags = fw_devlink_get_flags(); |
| struct device *con_dev; |
| bool own_link = true; |
| int ret; |
| |
| con_dev = get_dev_from_fwnode(link->consumer); |
| /* |
| * If consumer device is not available yet, make a "proxy" |
| * SYNC_STATE_ONLY link from the consumer's parent device to |
| * the supplier device. This is necessary to make sure the |
| * supplier doesn't get a sync_state() callback before the real |
| * consumer can create a device link to the supplier. |
| * |
| * This proxy link step is needed to handle the case where the |
| * consumer's parent device is added before the supplier. |
| */ |
| if (!con_dev) { |
| con_dev = fwnode_get_next_parent_dev(link->consumer); |
| /* |
| * However, if the consumer's parent device is also the |
| * parent of the supplier, don't create a |
| * consumer-supplier link from the parent to its child |
| * device. Such a dependency is impossible. |
| */ |
| if (con_dev && |
| fwnode_is_ancestor_of(con_dev->fwnode, fwnode)) { |
| put_device(con_dev); |
| con_dev = NULL; |
| } else { |
| own_link = false; |
| dl_flags = FW_DEVLINK_FLAGS_PERMISSIVE; |
| } |
| } |
| |
| if (!con_dev) |
| continue; |
| |
| ret = fw_devlink_create_devlink(con_dev, fwnode, dl_flags); |
| put_device(con_dev); |
| if (!own_link || ret == -EAGAIN) |
| continue; |
| |
| list_del(&link->s_hook); |
| list_del(&link->c_hook); |
| kfree(link); |
| } |
| } |
| |
| /** |
| * __fw_devlink_link_to_suppliers - Create device links to suppliers of a device |
| * @dev - The consumer device that needs to be linked to its suppliers |
| * @fwnode - Root of the fwnode tree that is used to create device links |
| * |
| * This function looks at all the supplier fwnodes of fwnode tree rooted at |
| * @fwnode and creates device links between @dev (consumer) and all the |
| * supplier devices of the entire fwnode tree at @fwnode. |
| * |
| * The function creates normal (non-SYNC_STATE_ONLY) device links between @dev |
| * and the real suppliers of @dev. Once these device links are created, the |
| * fwnode links are deleted. When such device links are successfully created, |
| * this function is called recursively on those supplier devices. This is |
| * needed to detect and break some invalid cycles in fwnode links. See |
| * fw_devlink_create_devlink() for more details. |
| * |
| * In addition, it also looks at all the suppliers of the entire fwnode tree |
| * because some of the child devices of @dev that have not been added yet |
| * (because @dev hasn't probed) might already have their suppliers added to |
| * driver core. So, this function creates SYNC_STATE_ONLY device links between |
| * @dev (consumer) and these suppliers to make sure they don't execute their |
| * sync_state() callbacks before these child devices have a chance to create |
| * their device links. The fwnode links that correspond to the child devices |
| * aren't delete because they are needed later to create the device links |
| * between the real consumer and supplier devices. |
| */ |
| static void __fw_devlink_link_to_suppliers(struct device *dev, |
| struct fwnode_handle *fwnode) |
| { |
| bool own_link = (dev->fwnode == fwnode); |
| struct fwnode_link *link, *tmp; |
| struct fwnode_handle *child = NULL; |
| u32 dl_flags; |
| |
| if (own_link) |
| dl_flags = fw_devlink_get_flags(); |
| else |
| dl_flags = FW_DEVLINK_FLAGS_PERMISSIVE; |
| |
| list_for_each_entry_safe(link, tmp, &fwnode->suppliers, c_hook) { |
| int ret; |
| struct device *sup_dev; |
| struct fwnode_handle *sup = link->supplier; |
| |
| ret = fw_devlink_create_devlink(dev, sup, dl_flags); |
| if (!own_link || ret == -EAGAIN) |
| continue; |
| |
| list_del(&link->s_hook); |
| list_del(&link->c_hook); |
| kfree(link); |
| |
| /* If no device link was created, nothing more to do. */ |
| if (ret) |
| continue; |
| |
| /* |
| * If a device link was successfully created to a supplier, we |
| * now need to try and link the supplier to all its suppliers. |
| * |
| * This is needed to detect and delete false dependencies in |
| * fwnode links that haven't been converted to a device link |
| * yet. See comments in fw_devlink_create_devlink() for more |
| * details on the false dependency. |
| * |
| * Without deleting these false dependencies, some devices will |
| * never probe because they'll keep waiting for their false |
| * dependency fwnode links to be converted to device links. |
| */ |
| sup_dev = get_dev_from_fwnode(sup); |
| __fw_devlink_link_to_suppliers(sup_dev, sup_dev->fwnode); |
| put_device(sup_dev); |
| } |
| |
| /* |
| * Make "proxy" SYNC_STATE_ONLY device links to represent the needs of |
| * all the descendants. This proxy link step is needed to handle the |
| * case where the supplier is added before the consumer's parent device |
| * (@dev). |
| */ |
| while ((child = fwnode_get_next_available_child_node(fwnode, child))) |
| __fw_devlink_link_to_suppliers(dev, child); |
| } |
| |
| static void fw_devlink_link_device(struct device *dev) |
| { |
| struct fwnode_handle *fwnode = dev->fwnode; |
| |
| if (!fw_devlink_flags) |
| return; |
| |
| fw_devlink_parse_fwtree(fwnode); |
| |
| mutex_lock(&fwnode_link_lock); |
| __fw_devlink_link_to_consumers(dev); |
| __fw_devlink_link_to_suppliers(dev, fwnode); |
| mutex_unlock(&fwnode_link_lock); |
| } |
| |
| /* Device links support end. */ |
| |
| int (*platform_notify)(struct device *dev) = NULL; |
| int (*platform_notify_remove)(struct device *dev) = NULL; |
| static struct kobject *dev_kobj; |
| struct kobject *sysfs_dev_char_kobj; |
| struct kobject *sysfs_dev_block_kobj; |
| |
| static DEFINE_MUTEX(device_hotplug_lock); |
| |
| void lock_device_hotplug(void) |
| { |
| mutex_lock(&device_hotplug_lock); |
| } |
| |
| void unlock_device_hotplug(void) |
| { |
| mutex_unlock(&device_hotplug_lock); |
| } |
| |
| int lock_device_hotplug_sysfs(void) |
| { |
| if (mutex_trylock(&device_hotplug_lock)) |
| return 0; |
| |
| /* Avoid busy looping (5 ms of sleep should do). */ |
| msleep(5); |
| return restart_syscall(); |
| } |
| |
| #ifdef CONFIG_BLOCK |
| static inline int device_is_not_partition(struct device *dev) |
| { |
| return !(dev->type == &part_type); |
| } |
| #else |
| static inline int device_is_not_partition(struct device *dev) |
| { |
| return 1; |
| } |
| #endif |
| |
| static int |
| device_platform_notify(struct device *dev, enum kobject_action action) |
| { |
| int ret; |
| |
| ret = acpi_platform_notify(dev, action); |
| if (ret) |
| return ret; |
| |
| ret = software_node_notify(dev, action); |
| if (ret) |
| return ret; |
| |
| if (platform_notify && action == KOBJ_ADD) |
| platform_notify(dev); |
| else if (platform_notify_remove && action == KOBJ_REMOVE) |
| platform_notify_remove(dev); |
| return 0; |
| } |
| |
| /** |
| * dev_driver_string - Return a device's driver name, if at all possible |
| * @dev: struct device to get the name of |
| * |
| * Will return the device's driver's name if it is bound to a device. If |
| * the device is not bound to a driver, it will return the name of the bus |
| * it is attached to. If it is not attached to a bus either, an empty |
| * string will be returned. |
| */ |
| const char *dev_driver_string(const struct device *dev) |
| { |
| struct device_driver *drv; |
| |
| /* dev->driver can change to NULL underneath us because of unbinding, |
| * so be careful about accessing it. dev->bus and dev->class should |
| * never change once they are set, so they don't need special care. |
| */ |
| drv = READ_ONCE(dev->driver); |
| return drv ? drv->name : dev_bus_name(dev); |
| } |
| EXPORT_SYMBOL(dev_driver_string); |
| |
| #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) |
| |
| static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, |
| char *buf) |
| { |
| struct device_attribute *dev_attr = to_dev_attr(attr); |
| struct device *dev = kobj_to_dev(kobj); |
| ssize_t ret = -EIO; |
| |
| if (dev_attr->show) |
| ret = dev_attr->show(dev, dev_attr, buf); |
| if (ret >= (ssize_t)PAGE_SIZE) { |
| printk("dev_attr_show: %pS returned bad count\n", |
| dev_attr->show); |
| } |
| return ret; |
| } |
| |
| static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct device_attribute *dev_attr = to_dev_attr(attr); |
| struct device *dev = kobj_to_dev(kobj); |
| ssize_t ret = -EIO; |
| |
| if (dev_attr->store) |
| ret = dev_attr->store(dev, dev_attr, buf, count); |
| return ret; |
| } |
| |
| static const struct sysfs_ops dev_sysfs_ops = { |
| .show = dev_attr_show, |
| .store = dev_attr_store, |
| }; |
| |
| #define to_ext_attr(x) container_of(x, struct dev_ext_attribute, attr) |
| |
| ssize_t device_store_ulong(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct dev_ext_attribute *ea = to_ext_attr(attr); |
| int ret; |
| unsigned long new; |
| |
| ret = kstrtoul(buf, 0, &new); |
| if (ret) |
| return ret; |
| *(unsigned long *)(ea->var) = new; |
| /* Always return full write size even if we didn't consume all */ |
| return size; |
| } |
| EXPORT_SYMBOL_GPL(device_store_ulong); |
| |
| ssize_t device_show_ulong(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct dev_ext_attribute *ea = to_ext_attr(attr); |
| return sysfs_emit(buf, "%lx\n", *(unsigned long *)(ea->var)); |
| } |
| EXPORT_SYMBOL_GPL(device_show_ulong); |
| |
| ssize_t device_store_int(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct dev_ext_attribute *ea = to_ext_attr(attr); |
| int ret; |
| long new; |
| |
| ret = kstrtol(buf, 0, &new); |
| if (ret) |
| return ret; |
| |
| if (new > INT_MAX || new < INT_MIN) |
| return -EINVAL; |
| *(int *)(ea->var) = new; |
| /* Always return full write size even if we didn't consume all */ |
| return size; |
| } |
| EXPORT_SYMBOL_GPL(device_store_int); |
| |
| ssize_t device_show_int(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct dev_ext_attribute *ea = to_ext_attr(attr); |
| |
| return sysfs_emit(buf, "%d\n", *(int *)(ea->var)); |
| } |
| EXPORT_SYMBOL_GPL(device_show_int); |
| |
| ssize_t device_store_bool(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct dev_ext_attribute *ea = to_ext_attr(attr); |
| |
| if (strtobool(buf, ea->var) < 0) |
| return -EINVAL; |
| |
| return size; |
| } |
| EXPORT_SYMBOL_GPL(device_store_bool); |
| |
| ssize_t device_show_bool(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct dev_ext_attribute *ea = to_ext_attr(attr); |
| |
| return sysfs_emit(buf, "%d\n", *(bool *)(ea->var)); |
| } |
| EXPORT_SYMBOL_GPL(device_show_bool); |
| |
| /** |
| * device_release - free device structure. |
| * @kobj: device's kobject. |
| * |
| * This is called once the reference count for the object |
| * reaches 0. We forward the call to the device's release |
| * method, which should handle actually freeing the structure. |
| */ |
| static void device_release(struct kobject *kobj) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct device_private *p = dev->p; |
| |
| /* |
| * Some platform devices are driven without driver attached |
| * and managed resources may have been acquired. Make sure |
| * all resources are released. |
| * |
| * Drivers still can add resources into device after device |
| * is deleted but alive, so release devres here to avoid |
| * possible memory leak. |
| */ |
| devres_release_all(dev); |
| |
| kfree(dev->dma_range_map); |
| |
| if (dev->release) |
| dev->release(dev); |
| else if (dev->type && dev->type->release) |
| dev->type->release(dev); |
| else if (dev->class && dev->class->dev_release) |
| dev->class->dev_release(dev); |
| else |
| WARN(1, KERN_ERR "Device '%s' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.\n", |
| dev_name(dev)); |
| kfree(p); |
| } |
| |
| static const void *device_namespace(struct kobject *kobj) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| const void *ns = NULL; |
| |
| if (dev->class && dev->class->ns_type) |
| ns = dev->class->namespace(dev); |
| |
| return ns; |
| } |
| |
| static void device_get_ownership(struct kobject *kobj, kuid_t *uid, kgid_t *gid) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| |
| if (dev->class && dev->class->get_ownership) |
| dev->class->get_ownership(dev, uid, gid); |
| } |
| |
| static struct kobj_type device_ktype = { |
| .release = device_release, |
| .sysfs_ops = &dev_sysfs_ops, |
| .namespace = device_namespace, |
| .get_ownership = device_get_ownership, |
| }; |
| |
| |
| static int dev_uevent_filter(struct kset *kset, struct kobject *kobj) |
| { |
| struct kobj_type *ktype = get_ktype(kobj); |
| |
| if (ktype == &device_ktype) { |
| struct device *dev = kobj_to_dev(kobj); |
| if (dev->bus) |
| return 1; |
| if (dev->class) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static const char *dev_uevent_name(struct kset *kset, struct kobject *kobj) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| |
| if (dev->bus) |
| return dev->bus->name; |
| if (dev->class) |
| return dev->class->name; |
| return NULL; |
| } |
| |
| static int dev_uevent(struct kset *kset, struct kobject *kobj, |
| struct kobj_uevent_env *env) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct device_driver *driver; |
| int retval = 0; |
| |
| /* add device node properties if present */ |
| if (MAJOR(dev->devt)) { |
| const char *tmp; |
| const char *name; |
| umode_t mode = 0; |
| kuid_t uid = GLOBAL_ROOT_UID; |
| kgid_t gid = GLOBAL_ROOT_GID; |
| |
| add_uevent_var(env, "MAJOR=%u", MAJOR(dev->devt)); |
| add_uevent_var(env, "MINOR=%u", MINOR(dev->devt)); |
| name = device_get_devnode(dev, &mode, &uid, &gid, &tmp); |
| if (name) { |
| add_uevent_var(env, "DEVNAME=%s", name); |
| if (mode) |
| add_uevent_var(env, "DEVMODE=%#o", mode & 0777); |
| if (!uid_eq(uid, GLOBAL_ROOT_UID)) |
| add_uevent_var(env, "DEVUID=%u", from_kuid(&init_user_ns, uid)); |
| if (!gid_eq(gid, GLOBAL_ROOT_GID)) |
| add_uevent_var(env, "DEVGID=%u", from_kgid(&init_user_ns, gid)); |
| kfree(tmp); |
| } |
| } |
| |
| if (dev->type && dev->type->name) |
| add_uevent_var(env, "DEVTYPE=%s", dev->type->name); |
| |
| /* Synchronize with module_remove_driver() */ |
| rcu_read_lock(); |
| driver = READ_ONCE(dev->driver); |
| if (driver) |
| add_uevent_var(env, "DRIVER=%s", driver->name); |
| rcu_read_unlock(); |
| |
| /* Add common DT information about the device */ |
| of_device_uevent(dev, env); |
| |
| /* have the bus specific function add its stuff */ |
| if (dev->bus && dev->bus->uevent) { |
| retval = dev->bus->uevent(dev, env); |
| if (retval) |
| pr_debug("device: '%s': %s: bus uevent() returned %d\n", |
| dev_name(dev), __func__, retval); |
| } |
| |
| /* have the class specific function add its stuff */ |
| if (dev->class && dev->class->dev_uevent) { |
| retval = dev->class->dev_uevent(dev, env); |
| if (retval) |
| pr_debug("device: '%s': %s: class uevent() " |
| "returned %d\n", dev_name(dev), |
| __func__, retval); |
| } |
| |
| /* have the device type specific function add its stuff */ |
| if (dev->type && dev->type->uevent) { |
| retval = dev->type->uevent(dev, env); |
| if (retval) |
| pr_debug("device: '%s': %s: dev_type uevent() " |
| "returned %d\n", dev_name(dev), |
| __func__, retval); |
| } |
| |
| return retval; |
| } |
| |
| static const struct kset_uevent_ops device_uevent_ops = { |
| .filter = dev_uevent_filter, |
| .name = dev_uevent_name, |
| .uevent = dev_uevent, |
| }; |
| |
| static ssize_t uevent_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct kobject *top_kobj; |
| struct kset *kset; |
| struct kobj_uevent_env *env = NULL; |
| int i; |
| int len = 0; |
| int retval; |
| |
| /* search the kset, the device belongs to */ |
| top_kobj = &dev->kobj; |
| while (!top_kobj->kset && top_kobj->parent) |
| top_kobj = top_kobj->parent; |
| if (!top_kobj->kset) |
| goto out; |
| |
| kset = top_kobj->kset; |
| if (!kset->uevent_ops || !kset->uevent_ops->uevent) |
| goto out; |
| |
| /* respect filter */ |
| if (kset->uevent_ops && kset->uevent_ops->filter) |
| if (!kset->uevent_ops->filter(kset, &dev->kobj)) |
| goto out; |
| |
| env = kzalloc(sizeof(struct kobj_uevent_env), GFP_KERNEL); |
| if (!env) |
| return -ENOMEM; |
| |
| /* let the kset specific function add its keys */ |
| retval = kset->uevent_ops->uevent(kset, &dev->kobj, env); |
| if (retval) |
| goto out; |
| |
| /* copy keys to file */ |
| for (i = 0; i < env->envp_idx; i++) |
| len += sysfs_emit_at(buf, len, "%s\n", env->envp[i]); |
| out: |
| kfree(env); |
| return len; |
| } |
| |
| static ssize_t uevent_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int rc; |
| |
| rc = kobject_synth_uevent(&dev->kobj, buf, count); |
| |
| if (rc) { |
| dev_err(dev, "uevent: failed to send synthetic uevent\n"); |
| return rc; |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(uevent); |
| |
| static ssize_t online_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| bool val; |
| |
| device_lock(dev); |
| val = !dev->offline; |
| device_unlock(dev); |
| return sysfs_emit(buf, "%u\n", val); |
| } |
| |
| static ssize_t online_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| bool val; |
| int ret; |
| |
| ret = strtobool(buf, &val); |
| if (ret < 0) |
| return ret; |
| |
| ret = lock_device_hotplug_sysfs(); |
| if (ret) |
| return ret; |
| |
| ret = val ? device_online(dev) : device_offline(dev); |
| unlock_device_hotplug(); |
| return ret < 0 ? ret : count; |
| } |
| static DEVICE_ATTR_RW(online); |
| |
| int device_add_groups(struct device *dev, const struct attribute_group **groups) |
| { |
| return sysfs_create_groups(&dev->kobj, groups); |
| } |
| EXPORT_SYMBOL_GPL(device_add_groups); |
| |
| void device_remove_groups(struct device *dev, |
| const struct attribute_group **groups) |
| { |
| sysfs_remove_groups(&dev->kobj, groups); |
| } |
| EXPORT_SYMBOL_GPL(device_remove_groups); |
| |
| union device_attr_group_devres { |
| const struct attribute_group *group; |
| const struct attribute_group **groups; |
| }; |
| |
| static int devm_attr_group_match(struct device *dev, void *res, void *data) |
| { |
| return ((union device_attr_group_devres *)res)->group == data; |
| } |
| |
| static void devm_attr_group_remove(struct device *dev, void *res) |
| { |
| union device_attr_group_devres *devres = res; |
| const struct attribute_group *group = devres->group; |
| |
| dev_dbg(dev, "%s: removing group %p\n", __func__, group); |
| sysfs_remove_group(&dev->kobj, group); |
| } |
| |
| static void devm_attr_groups_remove(struct device *dev, void *res) |
| { |
| union device_attr_group_devres *devres = res; |
| const struct attribute_group **groups = devres->groups; |
| |
| dev_dbg(dev, "%s: removing groups %p\n", __func__, groups); |
| sysfs_remove_groups(&dev->kobj, groups); |
| } |
| |
| /** |
| * devm_device_add_group - given a device, create a managed attribute group |
| * @dev: The device to create the group for |
| * @grp: The attribute group to create |
| * |
| * This function creates a group for the first time. It will explicitly |
| * warn and error if any of the attribute files being created already exist. |
| * |
| * Returns 0 on success or error code on failure. |
| */ |
| int devm_device_add_group(struct device *dev, const struct attribute_group *grp) |
| { |
| union device_attr_group_devres *devres; |
| int error; |
| |
| devres = devres_alloc(devm_attr_group_remove, |
| sizeof(*devres), GFP_KERNEL); |
| if (!devres) |
| return -ENOMEM; |
| |
| error = sysfs_create_group(&dev->kobj, grp); |
| if (error) { |
| devres_free(devres); |
| return error; |
| } |
| |
| devres->group = grp; |
| devres_add(dev, devres); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(devm_device_add_group); |
| |
| /** |
| * devm_device_remove_group: remove a managed group from a device |
| * @dev: device to remove the group from |
| * @grp: group to remove |
| * |
| * This function removes a group of attributes from a device. The attributes |
| * previously have to have been created for this group, otherwise it will fail. |
| */ |
| void devm_device_remove_group(struct device *dev, |
| const struct attribute_group *grp) |
| { |
| WARN_ON(devres_release(dev, devm_attr_group_remove, |
| devm_attr_group_match, |
| /* cast away const */ (void *)grp)); |
| } |
| EXPORT_SYMBOL_GPL(devm_device_remove_group); |
| |
| /** |
| * devm_device_add_groups - create a bunch of managed attribute groups |
| * @dev: The device to create the group for |
| * @groups: The attribute groups to create, NULL terminated |
| * |
| * This function creates a bunch of managed attribute groups. If an error |
| * occurs when creating a group, all previously created groups will be |
| * removed, unwinding everything back to the original state when this |
| * function was called. It will explicitly warn and error if any of the |
| * attribute files being created already exist. |
| * |
| * Returns 0 on success or error code from sysfs_create_group on failure. |
| */ |
| int devm_device_add_groups(struct device *dev, |
| const struct attribute_group **groups) |
| { |
| union device_attr_group_devres *devres; |
| int error; |
| |
| devres = devres_alloc(devm_attr_groups_remove, |
| sizeof(*devres), GFP_KERNEL); |
| if (!devres) |
| return -ENOMEM; |
| |
| error = sysfs_create_groups(&dev->kobj, groups); |
| if (error) { |
| devres_free(devres); |
| return error; |
| } |
| |
| devres->groups = groups; |
| devres_add(dev, devres); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(devm_device_add_groups); |
| |
| /** |
| * devm_device_remove_groups - remove a list of managed groups |
| * |
| * @dev: The device for the groups to be removed from |
| * @groups: NULL terminated list of groups to be removed |
| * |
| * If groups is not NULL, remove the specified groups from the device. |
| */ |
| void devm_device_remove_groups(struct device *dev, |
| const struct attribute_group **groups) |
| { |
| WARN_ON(devres_release(dev, devm_attr_groups_remove, |
| devm_attr_group_match, |
| /* cast away const */ (void *)groups)); |
| } |
| EXPORT_SYMBOL_GPL(devm_device_remove_groups); |
| |
| static int device_add_attrs(struct device *dev) |
| { |
| struct class *class = dev->class; |
| const struct device_type *type = dev->type; |
| int error; |
| |
| if (class) { |
| error = device_add_groups(dev, class->dev_groups); |
| if (error) |
| return error; |
| } |
| |
| if (type) { |
| error = device_add_groups(dev, type->groups); |
| if (error) |
| goto err_remove_class_groups; |
| } |
| |
| error = device_add_groups(dev, dev->groups); |
| if (error) |
| goto err_remove_type_groups; |
| |
| if (device_supports_offline(dev) && !dev->offline_disabled) { |
| error = device_create_file(dev, &dev_attr_online); |
| if (error) |
| goto err_remove_dev_groups; |
| } |
| |
| if (fw_devlink_flags && !fw_devlink_is_permissive() && dev->fwnode) { |
| error = device_create_file(dev, &dev_attr_waiting_for_supplier); |
| if (error) |
| goto err_remove_dev_online; |
| } |
| |
| return 0; |
| |
| err_remove_dev_online: |
| device_remove_file(dev, &dev_attr_online); |
| err_remove_dev_groups: |
| device_remove_groups(dev, dev->groups); |
| err_remove_type_groups: |
| if (type) |
| device_remove_groups(dev, type->groups); |
| err_remove_class_groups: |
| if (class) |
| device_remove_groups(dev, class->dev_groups); |
| |
| return error; |
| } |
| |
| static void device_remove_attrs(struct device *dev) |
| { |
| struct class *class = dev->class; |
| const struct device_type *type = dev->type; |
| |
| device_remove_file(dev, &dev_attr_waiting_for_supplier); |
| device_remove_file(dev, &dev_attr_online); |
| device_remove_groups(dev, dev->groups); |
| |
| if (type) |
| device_remove_groups(dev, type->groups); |
| |
| if (class) |
| device_remove_groups(dev, class->dev_groups); |
| } |
| |
| static ssize_t dev_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| return print_dev_t(buf, dev->devt); |
| } |
| static DEVICE_ATTR_RO(dev); |
| |
| /* /sys/devices/ */ |
| struct kset *devices_kset; |
| |
| /** |
| * devices_kset_move_before - Move device in the devices_kset's list. |
| * @deva: Device to move. |
| * @devb: Device @deva should come before. |
| */ |
| static void devices_kset_move_before(struct device *deva, struct device *devb) |
| { |
| if (!devices_kset) |
| return; |
| pr_debug("devices_kset: Moving %s before %s\n", |
| dev_name(deva), dev_name(devb)); |
| spin_lock(&devices_kset->list_lock); |
| list_move_tail(&deva->kobj.entry, &devb->kobj.entry); |
| spin_unlock(&devices_kset->list_lock); |
| } |
| |
| /** |
| * devices_kset_move_after - Move device in the devices_kset's list. |
| * @deva: Device to move |
| * @devb: Device @deva should come after. |
| */ |
| static void devices_kset_move_after(struct device *deva, struct device *devb) |
| { |
| if (!devices_kset) |
| return; |
| pr_debug("devices_kset: Moving %s after %s\n", |
| dev_name(deva), dev_name(devb)); |
| spin_lock(&devices_kset->list_lock); |
| list_move(&deva->kobj.entry, &devb->kobj.entry); |
| spin_unlock(&devices_kset->list_lock); |
| } |
| |
| /** |
| * devices_kset_move_last - move the device to the end of devices_kset's list. |
| * @dev: device to move |
| */ |
| void devices_kset_move_last(struct device *dev) |
| { |
| if (!devices_kset) |
| return; |
| pr_debug("devices_kset: Moving %s to end of list\n", dev_name(dev)); |
| spin_lock(&devices_kset->list_lock); |
| list_move_tail(&dev->kobj.entry, &devices_kset->list); |
| spin_unlock(&devices_kset->list_lock); |
| } |
| |
| /** |
| * device_create_file - create sysfs attribute file for device. |
| * @dev: device. |
| * @attr: device attribute descriptor. |
| */ |
| int device_create_file(struct device *dev, |
| const struct device_attribute *attr) |
| { |
| int error = 0; |
| |
| if (dev) { |
| WARN(((attr->attr.mode & S_IWUGO) && !attr->store), |
| "Attribute %s: write permission without 'store'\n", |
| attr->attr.name); |
| WARN(((attr->attr.mode & S_IRUGO) && !attr->show), |
| "Attribute %s: read permission without 'show'\n", |
| attr->attr.name); |
| error = sysfs_create_file(&dev->kobj, &attr->attr); |
| } |
| |
| return error; |
| } |
| EXPORT_SYMBOL_GPL(device_create_file); |
| |
| /** |
| * device_remove_file - remove sysfs attribute file. |
| * @dev: device. |
| * @attr: device attribute descriptor. |
| */ |
| void device_remove_file(struct device *dev, |
| const struct device_attribute *attr) |
| { |
| if (dev) |
| sysfs_remove_file(&dev->kobj, &attr->attr); |
| } |
| EXPORT_SYMBOL_GPL(device_remove_file); |
| |
| /** |
| * device_remove_file_self - remove sysfs attribute file from its own method. |
| * @dev: device. |
| * @attr: device attribute descriptor. |
| * |
| * See kernfs_remove_self() for details. |
| */ |
| bool device_remove_file_self(struct device *dev, |
| const struct device_attribute *attr) |
| { |
| if (dev) |
| return sysfs_remove_file_self(&dev->kobj, &attr->attr); |
| else |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(device_remove_file_self); |
| |
| /** |
| * device_create_bin_file - create sysfs binary attribute file for device. |
| * @dev: device. |
| * @attr: device binary attribute descriptor. |
| */ |
| int device_create_bin_file(struct device *dev, |
| const struct bin_attribute *attr) |
| { |
| int error = -EINVAL; |
| if (dev) |
| error = sysfs_create_bin_file(&dev->kobj, attr); |
| return error; |
| } |
| EXPORT_SYMBOL_GPL(device_create_bin_file); |
| |
| /** |
| * device_remove_bin_file - remove sysfs binary attribute file |
| * @dev: device. |
| * @attr: device binary attribute descriptor. |
| */ |
| void device_remove_bin_file(struct device *dev, |
| const struct bin_attribute *attr) |
| { |
| if (dev) |
| sysfs_remove_bin_file(&dev->kobj, attr); |
| } |
| EXPORT_SYMBOL_GPL(device_remove_bin_file); |
| |
| static void klist_children_get(struct klist_node *n) |
| { |
| struct device_private *p = to_device_private_parent(n); |
| struct device *dev = p->device; |
| |
| get_device(dev); |
| } |
| |
| static void klist_children_put(struct klist_node *n) |
| { |
| struct device_private *p = to_device_private_parent(n); |
| struct device *dev = p->device; |
| |
| put_device(dev); |
| } |
| |
| /** |
| * device_initialize - init device structure. |
| * @dev: device. |
| * |
| * This prepares the device for use by other layers by initializing |
| * its fields. |
| * It is the first half of device_register(), if called by |
| * that function, though it can also be called separately, so one |
| * may use @dev's fields. In particular, get_device()/put_device() |
| * may be used for reference counting of @dev after calling this |
| * function. |
| * |
| * All fields in @dev must be initialized by the caller to 0, except |
| * for those explicitly set to some other value. The simplest |
| * approach is to use kzalloc() to allocate the structure containing |
| * @dev. |
| * |
| * NOTE: Use put_device() to give up your reference instead of freeing |
| * @dev directly once you have called this function. |
| */ |
| void device_initialize(struct device *dev) |
| { |
| dev->kobj.kset = devices_kset; |
| kobject_init(&dev->kobj, &device_ktype); |
| INIT_LIST_HEAD(&dev->dma_pools); |
| mutex_init(&dev->mutex); |
| #ifdef CONFIG_PROVE_LOCKING |
| mutex_init(&dev->lockdep_mutex); |
| #endif |
| lockdep_set_novalidate_class(&dev->mutex); |
| spin_lock_init(&dev->devres_lock); |
| INIT_LIST_HEAD(&dev->devres_head); |
| device_pm_init(dev); |
| set_dev_node(dev, -1); |
| #ifdef CONFIG_GENERIC_MSI_IRQ |
| raw_spin_lock_init(&dev->msi_lock); |
| INIT_LIST_HEAD(&dev->msi_list); |
| #endif |
| INIT_LIST_HEAD(&dev->links.consumers); |
| INIT_LIST_HEAD(&dev->links.suppliers); |
| INIT_LIST_HEAD(&dev->links.defer_sync); |
| dev->links.status = DL_DEV_NO_DRIVER; |
| #ifdef CONFIG_SWIOTLB |
| dev->dma_io_tlb_mem = &io_tlb_default_mem; |
| #endif |
| } |
| EXPORT_SYMBOL_GPL(device_initialize); |
| |
| struct kobject *virtual_device_parent(struct device *dev) |
| { |
| static struct kobject *virtual_dir = NULL; |
| |
| if (!virtual_dir) |
| virtual_dir = kobject_create_and_add("virtual", |
| &devices_kset->kobj); |
| |
| return virtual_dir; |
| } |
| |
| struct class_dir { |
| struct kobject kobj; |
| struct class *class; |
| }; |
| |
| #define to_class_dir(obj) container_of(obj, struct class_dir, kobj) |
| |
| static void class_dir_release(struct kobject *kobj) |
| { |
| struct class_dir *dir = to_class_dir(kobj); |
| kfree(dir); |
| } |
| |
| static const |
| struct kobj_ns_type_operations *class_dir_child_ns_type(struct kobject *kobj) |
| { |
| struct class_dir *dir = to_class_dir(kobj); |
| return dir->class->ns_type; |
| } |
| |
| static struct kobj_type class_dir_ktype = { |
| .release = class_dir_release, |
| .sysfs_ops = &kobj_sysfs_ops, |
| .child_ns_type = class_dir_child_ns_type |
| }; |
| |
| static struct kobject * |
| class_dir_create_and_add(struct class *class, struct kobject *parent_kobj) |
| { |
| struct class_dir *dir; |
| int retval; |
| |
| dir = kzalloc(sizeof(*dir), GFP_KERNEL); |
| if (!dir) |
| return ERR_PTR(-ENOMEM); |
| |
| dir->class = class; |
| kobject_init(&dir->kobj, &class_dir_ktype); |
| |
| dir->kobj.kset = &class->p->glue_dirs; |
| |
| retval = kobject_add(&dir->kobj, parent_kobj, "%s", class->name); |
| if (retval < 0) { |
| kobject_put(&dir->kobj); |
| return ERR_PTR(retval); |
| } |
| return &dir->kobj; |
| } |
| |
| static DEFINE_MUTEX(gdp_mutex); |
| |
| static struct kobject *get_device_parent(struct device *dev, |
| struct device *parent) |
| { |
| if (dev->class) { |
| struct kobject *kobj = NULL; |
| struct kobject *parent_kobj; |
| struct kobject *k; |
| |
| #ifdef CONFIG_BLOCK |
| /* block disks show up in /sys/block */ |
| if (sysfs_deprecated && dev->class == &block_class) { |
| if (parent && parent->class == &block_class) |
| return &parent->kobj; |
| return &block_class.p->subsys.kobj; |
| } |
| #endif |
| |
| /* |
| * If we have no parent, we live in "virtual". |
| * Class-devices with a non class-device as parent, live |
| * in a "glue" directory to prevent namespace collisions. |
| */ |
| if (parent == NULL) |
| parent_kobj = virtual_device_parent(dev); |
| else if (parent->class && !dev->class->ns_type) |
| return &parent->kobj; |
| else |
| parent_kobj = &parent->kobj; |
| |
| mutex_lock(&gdp_mutex); |
| |
| /* find our class-directory at the parent and reference it */ |
| spin_lock(&dev->class->p->glue_dirs.list_lock); |
| list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) |
| if (k->parent == parent_kobj) { |
| kobj = kobject_get(k); |
| break; |
| } |
| spin_unlock(&dev->class->p->glue_dirs.list_lock); |
| if (kobj) { |
| mutex_unlock(&gdp_mutex); |
| return kobj; |
| } |
| |
| /* or create a new class-directory at the parent device */ |
| k = class_dir_create_and_add(dev->class, parent_kobj); |
| /* do not emit an uevent for this simple "glue" directory */ |
| mutex_unlock(&gdp_mutex); |
| return k; |
| } |
| |
| /* subsystems can specify a default root directory for their devices */ |
| if (!parent && dev->bus && dev->bus->dev_root) |
| return &dev->bus->dev_root->kobj; |
| |
| if (parent) |
| return &parent->kobj; |
| return NULL; |
| } |
| |
| static inline bool live_in_glue_dir(struct kobject *kobj, |
| struct device *dev) |
| { |
| if (!kobj || !dev->class || |
| kobj->kset != &dev->class->p->glue_dirs) |
| return false; |
| return true; |
| } |
| |
| static inline struct kobject *get_glue_dir(struct device *dev) |
| { |
| return dev->kobj.parent; |
| } |
| |
| /* |
| * make sure cleaning up dir as the last step, we need to make |
| * sure .release handler of kobject is run with holding the |
| * global lock |
| */ |
| static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir) |
| { |
| unsigned int ref; |
| |
| /* see if we live in a "glue" directory */ |
| if (!live_in_glue_dir(glue_dir, dev)) |
| return; |
| |
| mutex_lock(&gdp_mutex); |
| /** |
| * There is a race condition between removing glue directory |
| * and adding a new device under the glue directory. |
| * |
| * CPU1: CPU2: |
| * |
| * device_add() |
| * get_device_parent() |
| * class_dir_create_and_add() |
| * kobject_add_internal() |
| * create_dir() // create glue_dir |
| * |
| * device_add() |
| * get_device_parent() |
| * kobject_get() // get glue_dir |
| * |
| * device_del() |
| * cleanup_glue_dir() |
| * kobject_del(glue_dir) |
| * |
| * kobject_add() |
| * kobject_add_internal() |
| * create_dir() // in glue_dir |
| * sysfs_create_dir_ns() |
| * kernfs_create_dir_ns(sd) |
| * |
| * sysfs_remove_dir() // glue_dir->sd=NULL |
| * sysfs_put() // free glue_dir->sd |
| * |
| * // sd is freed |
| * kernfs_new_node(sd) |
| * kernfs_get(glue_dir) |
| * kernfs_add_one() |
| * kernfs_put() |
| * |
| * Before CPU1 remove last child device under glue dir, if CPU2 add |
| * a new device under glue dir, the glue_dir kobject reference count |
| * will be increase to 2 in kobject_get(k). And CPU2 has been called |
| * kernfs_create_dir_ns(). Meanwhile, CPU1 call sysfs_remove_dir() |
| * and sysfs_put(). This result in glue_dir->sd is freed. |
| * |
| * Then the CPU2 will see a stale "empty" but still potentially used |
| * glue dir around in kernfs_new_node(). |
| * |
| * In order to avoid this happening, we also should make sure that |
| * kernfs_node for glue_dir is released in CPU1 only when refcount |
| * for glue_dir kobj is 1. |
| */ |
| ref = kref_read(&glue_dir->kref); |
| if (!kobject_has_children(glue_dir) && !--ref) |
| kobject_del(glue_dir); |
| kobject_put(glue_dir); |
| mutex_unlock(&gdp_mutex); |
| } |
| |
| static int device_add_class_symlinks(struct device *dev) |
| { |
| struct device_node *of_node = dev_of_node(dev); |
| int error; |
| |
| if (of_node) { |
| error = sysfs_create_link(&dev->kobj, of_node_kobj(of_node), "of_node"); |
| if (error) |
| dev_warn(dev, "Error %d creating of_node link\n",error); |
| /* An error here doesn't warrant bringing down the device */ |
| } |
| |
| if (!dev->class) |
| return 0; |
| |
| error = sysfs_create_link(&dev->kobj, |
| &dev->class->p->subsys.kobj, |
| "subsystem"); |
| if (error) |
| goto out_devnode; |
| |
| if (dev->parent && device_is_not_partition(dev)) { |
| error = sysfs_create_link(&dev->kobj, &dev->parent->kobj, |
| "device"); |
| if (error) |
| goto out_subsys; |
| } |
| |
| #ifdef CONFIG_BLOCK |
| /* /sys/block has directories and does not need symlinks */ |
| if (sysfs_deprecated && dev->class == &block_class) |
| return 0; |
| #endif |
| |
| /* link in the class directory pointing to the device */ |
| error = sysfs_create_link(&dev->class->p->subsys.kobj, |
| &dev->kobj, dev_name(dev)); |
| if (error) |
| goto out_device; |
| |
| return 0; |
| |
| out_device: |
| sysfs_remove_link(&dev->kobj, "device"); |
| |
| out_subsys: |
| sysfs_remove_link(&dev->kobj, "subsystem"); |
| out_devnode: |
| sysfs_remove_link(&dev->kobj, "of_node"); |
| return error; |
| } |
| |
| static void device_remove_class_symlinks(struct device *dev) |
| { |
| if (dev_of_node(dev)) |
| sysfs_remove_link(&dev->kobj, "of_node"); |
| |
| if (!dev->class) |
| return; |
| |
| if (dev->parent && device_is_not_partition(dev)) |
| sysfs_remove_link(&dev->kobj, "device"); |
| sysfs_remove_link(&dev->kobj, "subsystem"); |
| #ifdef CONFIG_BLOCK |
| if (sysfs_deprecated && dev->class == &block_class) |
| return; |
| #endif |
| sysfs_delete_link(&dev->class->p->subsys.kobj, &dev->kobj, dev_name(dev)); |
| } |
| |
| /** |
| * dev_set_name - set a device name |
| * @dev: device |
| * @fmt: format string for the device's name |
| */ |
| int dev_set_name(struct device *dev, const char *fmt, ...) |
| { |
| va_list vargs; |
| int err; |
| |
| va_start(vargs, fmt); |
| err = kobject_set_name_vargs(&dev->kobj, fmt, vargs); |
| va_end(vargs); |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(dev_set_name); |
| |
| /** |
| * device_to_dev_kobj - select a /sys/dev/ directory for the device |
| * @dev: device |
| * |
| * By default we select char/ for new entries. Setting class->dev_obj |
| * to NULL prevents an entry from being created. class->dev_kobj must |
| * be set (or cleared) before any devices are registered to the class |
| * otherwise device_create_sys_dev_entry() and |
| * device_remove_sys_dev_entry() will disagree about the presence of |
| * the link. |
| */ |
| static struct kobject *device_to_dev_kobj(struct device *dev) |
| { |
| struct kobject *kobj; |
| |
| if (dev->class) |
| kobj = dev->class->dev_kobj; |
| else |
| kobj = sysfs_dev_char_kobj; |
| |
| return kobj; |
| } |
| |
| static int device_create_sys_dev_entry(struct device *dev) |
| { |
| struct kobject *kobj = device_to_dev_kobj(dev); |
| int error = 0; |
| char devt_str[15]; |
| |
| if (kobj) { |
| format_dev_t(devt_str, dev->devt); |
| error = sysfs_create_link(kobj, &dev->kobj, devt_str); |
| } |
| |
| return error; |
| } |
| |
| static void device_remove_sys_dev_entry(struct device *dev) |
| { |
| struct kobject *kobj = device_to_dev_kobj(dev); |
| char devt_str[15]; |
| |
| if (kobj) { |
| format_dev_t(devt_str, dev->devt); |
| sysfs_remove_link(kobj, devt_str); |
| } |
| } |
| |
| static int device_private_init(struct device *dev) |
| { |
| dev->p = kzalloc(sizeof(*dev->p), GFP_KERNEL); |
| if (!dev->p) |
| return -ENOMEM; |
| dev->p->device = dev; |
| klist_init(&dev->p->klist_children, klist_children_get, |
| klist_children_put); |
| INIT_LIST_HEAD(&dev->p->deferred_probe); |
| return 0; |
| } |
| |
| /** |
| * device_add - add device to device hierarchy. |
| * @dev: device. |
| * |
| * This is part 2 of device_register(), though may be called |
| * separately _iff_ device_initialize() has been called separately. |
| * |
| * This adds @dev to the kobject hierarchy via kobject_add(), adds it |
| * to the global and sibling lists for the device, then |
| * adds it to the other relevant subsystems of the driver model. |
| * |
| * Do not call this routine or device_register() more than once for |
| * any device structure. The driver model core is not designed to work |
| * with devices that get unregistered and then spring back to life. |
| * (Among other things, it's very hard to guarantee that all references |
| * to the previous incarnation of @dev have been dropped.) Allocate |
| * and register a fresh new struct device instead. |
| * |
| * NOTE: _Never_ directly free @dev after calling this function, even |
| * if it returned an error! Always use put_device() to give up your |
| * reference instead. |
| * |
| * Rule of thumb is: if device_add() succeeds, you should call |
| * device_del() when you want to get rid of it. If device_add() has |
| * *not* succeeded, use *only* put_device() to drop the reference |
| * count. |
| */ |
| int device_add(struct device *dev) |
| { |
| struct device *parent; |
| struct kobject *kobj; |
| struct class_interface *class_intf; |
| int error = -EINVAL; |
| struct kobject *glue_dir = NULL; |
| |
| dev = get_device(dev); |
| if (!dev) |
| goto done; |
| |
| if (!dev->p) { |
| error = device_private_init(dev); |
| if (error) |
| goto done; |
| } |
| |
| /* |
| * for statically allocated devices, which should all be converted |
| * some day, we need to initialize the name. We prevent reading back |
| * the name, and force the use of dev_name() |
| */ |
| if (dev->init_name) { |
| dev_set_name(dev, "%s", dev->init_name); |
| dev->init_name = NULL; |
| } |
| |
| /* subsystems can specify simple device enumeration */ |
| if (!dev_name(dev) && dev->bus && dev->bus->dev_name) |
| dev_set_name(dev, "%s%u", dev->bus->dev_name, dev->id); |
| |
| if (!dev_name(dev)) { |
| error = -EINVAL; |
| goto name_error; |
| } |
| |
| pr_debug("device: '%s': %s\n", dev_name(dev), __func__); |
| |
| parent = get_device(dev->parent); |
| kobj = get_device_parent(dev, parent); |
| if (IS_ERR(kobj)) { |
| error = PTR_ERR(kobj); |
| goto parent_error; |
| } |
| if (kobj) |
| dev->kobj.parent = kobj; |
| |
| /* use parent numa_node */ |
| if (parent && (dev_to_node(dev) == NUMA_NO_NODE)) |
| set_dev_node(dev, dev_to_node(parent)); |
| |
| /* first, register with generic layer. */ |
| /* we require the name to be set before, and pass NULL */ |
| error = kobject_add(&dev->kobj, dev->kobj.parent, NULL); |
| if (error) { |
| glue_dir = get_glue_dir(dev); |
| goto Error; |
| } |
| |
| /* notify platform of device entry */ |
| error = device_platform_notify(dev, KOBJ_ADD); |
| if (error) |
| goto platform_error; |
| |
| error = device_create_file(dev, &dev_attr_uevent); |
| if (error) |
| goto attrError; |
| |
| error = device_add_class_symlinks(dev); |
| if (error) |
| goto SymlinkError; |
| error = device_add_attrs(dev); |
| if (error) |
| goto AttrsError; |
| error = bus_add_device(dev); |
| if (error) |
| goto BusError; |
| error = dpm_sysfs_add(dev); |
| if (error) |
| goto DPMError; |
| device_pm_add(dev); |
| |
| if (MAJOR(dev->devt)) { |
| error = device_create_file(dev, &dev_attr_dev); |
| if (error) |
| goto DevAttrError; |
| |
| error = device_create_sys_dev_entry(dev); |
| if (error) |
| goto SysEntryError; |
| |
| devtmpfs_create_node(dev); |
| } |
| |
| /* Notify clients of device addition. This call must come |
| * after dpm_sysfs_add() and before kobject_uevent(). |
| */ |
| if (dev->bus) |
| blocking_notifier_call_chain(&dev->bus->p->bus_notifier, |
| BUS_NOTIFY_ADD_DEVICE, dev); |
| |
| kobject_uevent(&dev->kobj, KOBJ_ADD); |
| |
| /* |
| * Check if any of the other devices (consumers) have been waiting for |
| * this device (supplier) to be added so that they can create a device |
| * link to it. |
| * |
| * This needs to happen after device_pm_add() because device_link_add() |
| * requires the supplier be registered before it's called. |
| * |
| * But this also needs to happen before bus_probe_device() to make sure |
| * waiting consumers can link to it before the driver is bound to the |
| * device and the driver sync_state callback is called for this device. |
| */ |
| if (dev->fwnode && !dev->fwnode->dev) { |
| dev->fwnode->dev = dev; |
| fw_devlink_link_device(dev); |
| } |
| |
| bus_probe_device(dev); |
| if (parent) |
| klist_add_tail(&dev->p->knode_parent, |
| &parent->p->klist_children); |
| |
| if (d
|