Merge 5.15.103 into android13-5.15-lts

Changes in 5.15.103
	fs: prevent out-of-bounds array speculation when closing a file descriptor
	btrfs: fix percent calculation for bg reclaim message
	perf inject: Fix --buildid-all not to eat up MMAP2
	fork: allow CLONE_NEWTIME in clone3 flags
	x86/CPU/AMD: Disable XSAVES on AMD family 0x17
	drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
	drm/connector: print max_requested_bpc in state debugfs
	staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
	ext4: fix cgroup writeback accounting with fs-layer encryption
	ext4: fix RENAME_WHITEOUT handling for inline directories
	ext4: fix another off-by-one fsmap error on 1k block filesystems
	ext4: move where set the MAY_INLINE_DATA flag is set
	ext4: fix WARNING in ext4_update_inline_data
	ext4: zero i_disksize when initializing the bootloader inode
	nfc: change order inside nfc_se_io error path
	KVM: Optimize kvm_make_vcpus_request_mask() a bit
	KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()
	KVM: Register /dev/kvm as the _very_ last thing during initialization
	KVM: SVM: Don't rewrite guest ICR on AVIC IPI virtualization failure
	KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target
	fs: dlm: fix log of lowcomms vs midcomms
	fs: dlm: add midcomms init/start functions
	fs: dlm: start midcomms before scand
	udf: Fix off-by-one error when discarding preallocation
	f2fs: avoid down_write on nat_tree_lock during checkpoint
	f2fs: do not bother checkpoint by f2fs_get_node_info
	f2fs: retry to update the inode page given data corruption
	ipmi:ssif: Increase the message retry time
	ipmi:ssif: Add a timer between request retries
	irqdomain: Refactor __irq_domain_alloc_irqs()
	iommu/vt-d: Fix PASID directory pointer coherency
	block/brd: add error handling support for add_disk()
	brd: mark as nowait compatible
	arm64: efi: Make efi_rt_lock a raw_spinlock
	RISC-V: Avoid dereferening NULL regs in die()
	riscv: Avoid enabling interrupts in die()
	riscv: Add header include guards to insn.h
	scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
	regulator: Flag uncontrollable regulators as always_on
	regulator: core: Fix off-on-delay-us for always-on/boot-on regulators
	regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
	ext4: Fix possible corruption when moving a directory
	drm/nouveau/kms/nv50-: remove unused functions
	drm/nouveau/kms/nv50: fix nv50_wndw_new_ prototype
	drm/msm: Fix potential invalid ptr free
	drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register
	drm/msm/a5xx: fix highest bank bit for a530
	drm/msm/a5xx: fix the emptyness check in the preempt code
	drm/msm/a5xx: fix context faults during ring switch
	bgmac: fix *initial* chip reset to support BCM5358
	nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties
	powerpc: dts: t1040rdb: fix compatible string for Rev A boards
	ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()
	selftests: nft_nat: ensuring the listening side is up before starting the client
	perf stat: Fix counting when initial delay configured
	net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver
	net: caif: Fix use-after-free in cfusbl_device_notify()
	ice: copy last block omitted in ice_get_module_eeprom()
	bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
	drm/msm/dpu: fix len of sc7180 ctl blocks
	net: stmmac: add to set device wake up flag when stmmac init phy
	net: phylib: get rid of unnecessary locking
	bnxt_en: Avoid order-5 memory allocation for TPA data
	netfilter: ctnetlink: revert to dumping mark regardless of event type
	netfilter: tproxy: fix deadlock due to missing BH disable
	btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
	net: phy: smsc: Cache interrupt mask
	net: phy: smsc: fix link up detection in forced irq mode
	net: ethernet: mtk_eth_soc: fix RX data corruption issue
	scsi: megaraid_sas: Update max supported LD IDs to 240
	netfilter: conntrack: adopt safer max chain length
	platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
	net/smc: fix fallback failed while sendmsg with fastopen
	octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
	SUNRPC: Fix a server shutdown leak
	net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
	af_unix: Remove unnecessary brackets around CONFIG_AF_UNIX_OOB.
	af_unix: fix struct pid leaks in OOB support
	riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
	s390/ftrace: remove dead code
	RISC-V: Don't check text_mutex during stop_machine
	ext4: Fix deadlock during directory rename
	irqdomain: Fix mapping-creation race
	nbd: use the correct block_device in nbd_bdev_reset
	iommu/amd: Add PCI segment support for ivrs_[ioapic/hpet/acpihid] commands
	iommu/amd: Fix ill-formed ivrs_ioapic, ivrs_hpet and ivrs_acpihid options
	iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
	staging: rtl8723bs: clean up comparsions to NULL
	Staging: rtl8723bs: Placing opening { braces in previous line
	staging: rtl8723bs: fix placement of braces
	staging: rtl8723bs: Fix key-store index handling
	watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
	tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
	xfs: use setattr_copy to set vfs inode attributes
	xfs: remove XFS_PREALLOC_SYNC
	xfs: fallocate() should call file_modified()
	xfs: set prealloc flag in xfs_alloc_file_space()
	fs: add mode_strip_sgid() helper
	fs: move S_ISGID stripping into the vfs_*() helpers
	attr: add in_group_or_capable()
	fs: move should_remove_suid()
	attr: add setattr_should_drop_sgid()
	attr: use consistent sgid stripping checks
	fs: use consistent setgid checks in is_sxid()
	MIPS: Fix a compilation issue
	powerpc/iommu: fix memory leak with using debugfs_lookup()
	powerpc/kcsan: Exclude udelay to prevent recursive instrumentation
	alpha: fix R_ALPHA_LITERAL reloc for large modules
	macintosh: windfarm: Use unsigned type for 1-bit bitfields
	PCI: Add SolidRun vendor ID
	scripts: handle BrokenPipeError for python scripts
	media: ov5640: Fix analogue gain control
	media: rc: gpio-ir-recv: add remove function
	filelocks: use mount idmapping for setlease permission check
	ext4: refactor ext4_free_blocks() to pull out ext4_mb_clear_bb()
	ext4: add ext4_sb_block_valid() refactored out of ext4_inode_block_valid()
	ext4: add strict range checks while freeing blocks
	ext4: block range must be validated before use in ext4_mb_clear_bb()
	arch: fix broken BuildID for arm64 and riscv
	powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT
	powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
	s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
	sh: define RUNTIME_DISCARD_EXIT
	tools build: Add feature test for init_disassemble_info API changes
	tools include: add dis-asm-compat.h to handle version differences
	tools perf: Fix compilation error with new binutils
	tools bpf_jit_disasm: Fix compilation error with new binutils
	tools bpftool: Fix compilation error with new binutils
	KVM: fix memoryleak in kvm_init()
	xfs: remove xfs_setattr_time() declaration
	UML: define RUNTIME_DISCARD_EXIT
	fs: hold writers when changing mount's idmapping
	KVM: nVMX: Don't use Enlightened MSR Bitmap for L3
	KVM: VMX: Introduce vmx_msr_bitmap_l01_changed() helper
	KVM: VMX: Fix crash due to uninitialized current_vmcs
	Makefile: use -gdwarf-{4|5} for assembler for DEBUG_INFO_DWARF{4|5}
	Linux 5.15.103

Change-Id: I49891cfa5e5316733be06874b36bb276d004e360
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
tree: e8133cc46dfcd666aec54a436032c2799a022821
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. io_uring/
  12. ipc/
  13. kernel/
  14. lib/
  15. LICENSES/
  16. mm/
  17. net/
  18. samples/
  19. scripts/
  20. security/
  21. sound/
  22. tools/
  23. usr/
  24. virt/
  25. .clang-format
  26. .cocciconfig
  27. .get_maintainer.ignore
  28. .gitattributes
  29. .gitignore
  30. .mailmap
  31. BUILD.bazel
  32. build.config.aarch64
  33. build.config.allmodconfig
  34. build.config.allmodconfig.aarch64
  35. build.config.allmodconfig.arm
  36. build.config.allmodconfig.x86_64
  37. build.config.amlogic
  38. build.config.arm
  39. build.config.common
  40. build.config.constants
  41. build.config.db845c
  42. build.config.gce.x86_64
  43. build.config.gki
  44. build.config.gki-debug.aarch64
  45. build.config.gki-debug.x86_64
  46. build.config.gki.aarch64
  47. build.config.gki.aarch64.fips140
  48. build.config.gki.x86_64
  49. build.config.gki_kasan
  50. build.config.gki_kasan.aarch64
  51. build.config.gki_kasan.x86_64
  52. build.config.gki_kprobes
  53. build.config.gki_kprobes.aarch64
  54. build.config.gki_kprobes.x86_64
  55. build.config.khwasan
  56. build.config.rockpi4
  57. build.config.x86_64
  58. COPYING
  59. CREDITS
  60. Kbuild
  61. Kconfig
  62. Kconfig.ext
  63. MAINTAINERS
  64. Makefile
  65. OWNERS
  66. README
  67. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass scripts/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)