| # -*- coding: utf-8 -*- |
| # |
| # The Linux Kernel documentation build configuration file, created by |
| # sphinx-quickstart on Fri Feb 12 13:51:46 2016. |
| # |
| # This file is execfile()d with the current directory set to its |
| # containing dir. |
| # |
| # Note that not all possible configuration values are present in this |
| # autogenerated file. |
| # |
| # All configuration values have a default; values that are commented out |
| # serve to show the default. |
| |
| import sys |
| import os |
| import sphinx |
| |
| # Get Sphinx version |
| major, minor, patch = sphinx.version_info[:3] |
| |
| |
| # If extensions (or modules to document with autodoc) are in another directory, |
| # add these directories to sys.path here. If the directory is relative to the |
| # documentation root, use os.path.abspath to make it absolute, like shown here. |
| sys.path.insert(0, os.path.abspath('sphinx')) |
| from load_config import loadConfig |
| |
| # -- General configuration ------------------------------------------------ |
| |
| # If your documentation needs a minimal Sphinx version, state it here. |
| needs_sphinx = '1.7' |
| |
| # Add any Sphinx extension module names here, as strings. They can be |
| # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom |
| # ones. |
| extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', |
| 'kfigure', 'sphinx.ext.ifconfig', 'automarkup', |
| 'maintainers_include', 'sphinx.ext.autosectionlabel', |
| 'kernel_abi', 'kernel_feat'] |
| |
| if major >= 3: |
| if (major > 3) or (minor > 0 or patch >= 2): |
| # Sphinx c function parser is more pedantic with regards to type |
| # checking. Due to that, having macros at c:function cause problems. |
| # Those needed to be scaped by using c_id_attributes[] array |
| c_id_attributes = [ |
| # GCC Compiler types not parsed by Sphinx: |
| "__restrict__", |
| |
| # include/linux/compiler_types.h: |
| "__iomem", |
| "__kernel", |
| "noinstr", |
| "notrace", |
| "__percpu", |
| "__rcu", |
| "__user", |
| |
| # include/linux/compiler_attributes.h: |
| "__alias", |
| "__aligned", |
| "__aligned_largest", |
| "__always_inline", |
| "__assume_aligned", |
| "__cold", |
| "__attribute_const__", |
| "__copy", |
| "__pure", |
| "__designated_init", |
| "__visible", |
| "__printf", |
| "__scanf", |
| "__gnu_inline", |
| "__malloc", |
| "__mode", |
| "__no_caller_saved_registers", |
| "__noclone", |
| "__nonstring", |
| "__noreturn", |
| "__packed", |
| "__pure", |
| "__section", |
| "__always_unused", |
| "__maybe_unused", |
| "__used", |
| "__weak", |
| "noinline", |
| |
| # include/linux/memblock.h: |
| "__init_memblock", |
| "__meminit", |
| |
| # include/linux/init.h: |
| "__init", |
| "__ref", |
| |
| # include/linux/linkage.h: |
| "asmlinkage", |
| ] |
| |
| else: |
| extensions.append('cdomain') |
| |
| # Ensure that autosectionlabel will produce unique names |
| autosectionlabel_prefix_document = True |
| autosectionlabel_maxdepth = 2 |
| |
| extensions.append("sphinx.ext.imgmath") |
| |
| # Add any paths that contain templates here, relative to this directory. |
| templates_path = ['_templates'] |
| |
| # The suffix(es) of source filenames. |
| # You can specify multiple suffix as a list of string: |
| # source_suffix = ['.rst', '.md'] |
| source_suffix = '.rst' |
| |
| # The encoding of source files. |
| #source_encoding = 'utf-8-sig' |
| |
| # The master toctree document. |
| master_doc = 'index' |
| |
| # General information about the project. |
| project = 'The Linux Kernel' |
| copyright = 'The kernel development community' |
| author = 'The kernel development community' |
| |
| # The version info for the project you're documenting, acts as replacement for |
| # |version| and |release|, also used in various other places throughout the |
| # built documents. |
| # |
| # In a normal build, version and release are are set to KERNELVERSION and |
| # KERNELRELEASE, respectively, from the Makefile via Sphinx command line |
| # arguments. |
| # |
| # The following code tries to extract the information by reading the Makefile, |
| # when Sphinx is run directly (e.g. by Read the Docs). |
| try: |
| makefile_version = None |
| makefile_patchlevel = None |
| for line in open('../Makefile'): |
| key, val = [x.strip() for x in line.split('=', 2)] |
| if key == 'VERSION': |
| makefile_version = val |
| elif key == 'PATCHLEVEL': |
| makefile_patchlevel = val |
| if makefile_version and makefile_patchlevel: |
| break |
| except: |
| pass |
| finally: |
| if makefile_version and makefile_patchlevel: |
| version = release = makefile_version + '.' + makefile_patchlevel |
| else: |
| version = release = "unknown version" |
| |
| # The language for content autogenerated by Sphinx. Refer to documentation |
| # for a list of supported languages. |
| # |
| # This is also used if you do content translation via gettext catalogs. |
| # Usually you set "language" from the command line for these cases. |
| language = 'en' |
| |
| # There are two options for replacing |today|: either, you set today to some |
| # non-false value, then it is used: |
| #today = '' |
| # Else, today_fmt is used as the format for a strftime call. |
| #today_fmt = '%B %d, %Y' |
| |
| # List of patterns, relative to source directory, that match files and |
| # directories to ignore when looking for source files. |
| exclude_patterns = ['output'] |
| |
| # The reST default role (used for this markup: `text`) to use for all |
| # documents. |
| #default_role = None |
| |
| # If true, '()' will be appended to :func: etc. cross-reference text. |
| #add_function_parentheses = True |
| |
| # If true, the current module name will be prepended to all description |
| # unit titles (such as .. function::). |
| #add_module_names = True |
| |
| # If true, sectionauthor and moduleauthor directives will be shown in the |
| # output. They are ignored by default. |
| #show_authors = False |
| |
| # The name of the Pygments (syntax highlighting) style to use. |
| pygments_style = 'sphinx' |
| |
| # A list of ignored prefixes for module index sorting. |
| #modindex_common_prefix = [] |
| |
| # If true, keep warnings as "system message" paragraphs in the built documents. |
| #keep_warnings = False |
| |
| # If true, `todo` and `todoList` produce output, else they produce nothing. |
| todo_include_todos = False |
| |
| primary_domain = 'c' |
| highlight_language = 'none' |
| |
| # -- Options for HTML output ---------------------------------------------- |
| |
| # The theme to use for HTML and HTML Help pages. See the documentation for |
| # a list of builtin themes. |
| |
| # The Read the Docs theme is available from |
| # - https://github.com/snide/sphinx_rtd_theme |
| # - https://pypi.python.org/pypi/sphinx_rtd_theme |
| # - python-sphinx-rtd-theme package (on Debian) |
| try: |
| import sphinx_rtd_theme |
| html_theme = 'sphinx_rtd_theme' |
| html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] |
| except ImportError: |
| sys.stderr.write('Warning: The Sphinx \'sphinx_rtd_theme\' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.\n') |
| |
| # Theme options are theme-specific and customize the look and feel of a theme |
| # further. For a list of options available for each theme, see the |
| # documentation. |
| #html_theme_options = {} |
| |
| # Add any paths that contain custom themes here, relative to this directory. |
| #html_theme_path = [] |
| |
| # The name for this set of Sphinx documents. If None, it defaults to |
| # "<project> v<release> documentation". |
| #html_title = None |
| |
| # A shorter title for the navigation bar. Default is the same as html_title. |
| #html_short_title = None |
| |
| # The name of an image file (relative to this directory) to place at the top |
| # of the sidebar. |
| #html_logo = None |
| |
| # The name of an image file (within the static path) to use as favicon of the |
| # docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 |
| # pixels large. |
| #html_favicon = None |
| |
| # Add any paths that contain custom static files (such as style sheets) here, |
| # relative to this directory. They are copied after the builtin static files, |
| # so a file named "default.css" will overwrite the builtin "default.css". |
| |
| html_static_path = ['sphinx-static'] |
| |
| html_context = { |
| 'css_files': [ |
| '_static/theme_overrides.css', |
| ], |
| } |
| |
| # Add any extra paths that contain custom files (such as robots.txt or |
| # .htaccess) here, relative to this directory. These files are copied |
| # directly to the root of the documentation. |
| #html_extra_path = [] |
| |
| # If not '', a 'Last updated on:' timestamp is inserted at every page bottom, |
| # using the given strftime format. |
| #html_last_updated_fmt = '%b %d, %Y' |
| |
| # If true, SmartyPants will be used to convert quotes and dashes to |
| # typographically correct entities. |
| html_use_smartypants = False |
| |
| # Custom sidebar templates, maps document names to template names. |
| #html_sidebars = {} |
| |
| # Additional templates that should be rendered to pages, maps page names to |
| # template names. |
| #html_additional_pages = {} |
| |
| # If false, no module index is generated. |
| #html_domain_indices = True |
| |
| # If false, no index is generated. |
| #html_use_index = True |
| |
| # If true, the index is split into individual pages for each letter. |
| #html_split_index = False |
| |
| # If true, links to the reST sources are added to the pages. |
| #html_show_sourcelink = True |
| |
| # If true, "Created using Sphinx" is shown in the HTML footer. Default is True. |
| #html_show_sphinx = True |
| |
| # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. |
| #html_show_copyright = True |
| |
| # If true, an OpenSearch description file will be output, and all pages will |
| # contain a <link> tag referring to it. The value of this option must be the |
| # base URL from which the finished HTML is served. |
| #html_use_opensearch = '' |
| |
| # This is the file name suffix for HTML files (e.g. ".xhtml"). |
| #html_file_suffix = None |
| |
| # Language to be used for generating the HTML full-text search index. |
| # Sphinx supports the following languages: |
| # 'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja' |
| # 'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr' |
| #html_search_language = 'en' |
| |
| # A dictionary with options for the search language support, empty by default. |
| # Now only 'ja' uses this config value |
| #html_search_options = {'type': 'default'} |
| |
| # The name of a javascript file (relative to the configuration directory) that |
| # implements a search results scorer. If empty, the default will be used. |
| #html_search_scorer = 'scorer.js' |
| |
| # Output file base name for HTML help builder. |
| htmlhelp_basename = 'TheLinuxKerneldoc' |
| |
| # -- Options for LaTeX output --------------------------------------------- |
| |
| latex_elements = { |
| # The paper size ('letterpaper' or 'a4paper'). |
| 'papersize': 'a4paper', |
| |
| # The font size ('10pt', '11pt' or '12pt'). |
| 'pointsize': '11pt', |
| |
| # Latex figure (float) alignment |
| #'figure_align': 'htbp', |
| |
| # Don't mangle with UTF-8 chars |
| 'inputenc': '', |
| 'utf8extra': '', |
| |
| # Set document margins |
| 'sphinxsetup': ''' |
| hmargin=0.5in, vmargin=1in, |
| parsedliteralwraps=true, |
| verbatimhintsturnover=false, |
| ''', |
| |
| # For CJK One-half spacing, need to be in front of hyperref |
| 'extrapackages': r'\usepackage{setspace}', |
| |
| # Additional stuff for the LaTeX preamble. |
| 'preamble': ''' |
| % Prevent column squeezing of tabulary. |
| \\setlength{\\tymin}{20em} |
| % Use some font with UTF-8 support with XeLaTeX |
| \\usepackage{fontspec} |
| \\setsansfont{DejaVu Sans} |
| \\setromanfont{DejaVu Serif} |
| \\setmonofont{DejaVu Sans Mono} |
| ''', |
| } |
| |
| # Translations have Asian (CJK) characters which are only displayed if |
| # xeCJK is used |
| |
| latex_elements['preamble'] += ''' |
| \\IfFontExistsTF{Noto Sans CJK SC}{ |
| % This is needed for translations |
| \\usepackage{xeCJK} |
| \\IfFontExistsTF{Noto Serif CJK SC}{ |
| \\setCJKmainfont{Noto Serif CJK SC}[AutoFakeSlant] |
| }{ |
| \\setCJKmainfont{Noto Sans CJK SC}[AutoFakeSlant] |
| } |
| \\setCJKsansfont{Noto Sans CJK SC}[AutoFakeSlant] |
| \\setCJKmonofont{Noto Sans Mono CJK SC}[AutoFakeSlant] |
| % CJK Language-specific font choices |
| \\IfFontExistsTF{Noto Serif CJK SC}{ |
| \\newCJKfontfamily[SCmain]\\scmain{Noto Serif CJK SC}[AutoFakeSlant] |
| \\newCJKfontfamily[SCserif]\\scserif{Noto Serif CJK SC}[AutoFakeSlant] |
| }{ |
| \\newCJKfontfamily[SCmain]\\scmain{Noto Sans CJK SC}[AutoFakeSlant] |
| \\newCJKfontfamily[SCserif]\\scserif{Noto Sans CJK SC}[AutoFakeSlant] |
| } |
| \\newCJKfontfamily[SCsans]\\scsans{Noto Sans CJK SC}[AutoFakeSlant] |
| \\newCJKfontfamily[SCmono]\\scmono{Noto Sans Mono CJK SC}[AutoFakeSlant] |
| \\IfFontExistsTF{Noto Serif CJK TC}{ |
| \\newCJKfontfamily[TCmain]\\tcmain{Noto Serif CJK TC}[AutoFakeSlant] |
| \\newCJKfontfamily[TCserif]\\tcserif{Noto Serif CJK TC}[AutoFakeSlant] |
| }{ |
| \\newCJKfontfamily[TCmain]\\tcmain{Noto Sans CJK TC}[AutoFakeSlant] |
| \\newCJKfontfamily[TCserif]\\tcserif{Noto Sans CJK TC}[AutoFakeSlant] |
| } |
| \\newCJKfontfamily[TCsans]\\tcsans{Noto Sans CJK TC}[AutoFakeSlant] |
| \\newCJKfontfamily[TCmono]\\tcmono{Noto Sans Mono CJK TC}[AutoFakeSlant] |
| \\IfFontExistsTF{Noto Serif CJK KR}{ |
| \\newCJKfontfamily[KRmain]\\krmain{Noto Serif CJK KR}[AutoFakeSlant] |
| \\newCJKfontfamily[KRserif]\\krserif{Noto Serif CJK KR}[AutoFakeSlant] |
| }{ |
| \\newCJKfontfamily[KRmain]\\krmain{Noto Sans CJK KR}[AutoFakeSlant] |
| \\newCJKfontfamily[KRserif]\\krserif{Noto Sans CJK KR}[AutoFakeSlant] |
| } |
| \\newCJKfontfamily[KRsans]\\krsans{Noto Sans CJK KR}[AutoFakeSlant] |
| \\newCJKfontfamily[KRmono]\\krmono{Noto Sans Mono CJK KR}[AutoFakeSlant] |
| \\IfFontExistsTF{Noto Serif CJK JP}{ |
| \\newCJKfontfamily[JPmain]\\jpmain{Noto Serif CJK JP}[AutoFakeSlant] |
| \\newCJKfontfamily[JPserif]\\jpserif{Noto Serif CJK JP}[AutoFakeSlant] |
| }{ |
| \\newCJKfontfamily[JPmain]\\jpmain{Noto Sans CJK JP}[AutoFakeSlant] |
| \\newCJKfontfamily[JPserif]\\jpserif{Noto Sans CJK JP}[AutoFakeSlant] |
| } |
| \\newCJKfontfamily[JPsans]\\jpsans{Noto Sans CJK JP}[AutoFakeSlant] |
| \\newCJKfontfamily[JPmono]\\jpmono{Noto Sans Mono CJK JP}[AutoFakeSlant] |
| % Dummy commands for Sphinx < 2.3 (no 'extrapackages' support) |
| \\providecommand{\\onehalfspacing}{} |
| \\providecommand{\\singlespacing}{} |
| % Define custom macros to on/off CJK |
| \\newcommand{\\kerneldocCJKon}{\\makexeCJKactive\\onehalfspacing} |
| \\newcommand{\\kerneldocCJKoff}{\\makexeCJKinactive\\singlespacing} |
| \\newcommand{\\kerneldocBeginSC}{% |
| \\begingroup% |
| \\scmain% |
| } |
| \\newcommand{\\kerneldocEndSC}{\\endgroup} |
| \\newcommand{\\kerneldocBeginTC}{% |
| \\begingroup% |
| \\tcmain% |
| \\renewcommand{\\CJKrmdefault}{TCserif}% |
| \\renewcommand{\\CJKsfdefault}{TCsans}% |
| \\renewcommand{\\CJKttdefault}{TCmono}% |
| } |
| \\newcommand{\\kerneldocEndTC}{\\endgroup} |
| \\newcommand{\\kerneldocBeginKR}{% |
| \\begingroup% |
| \\xeCJKDeclareCharClass{HalfLeft}{`“,`‘}% |
| \\xeCJKDeclareCharClass{HalfRight}{`”,`’}% |
| \\krmain% |
| \\renewcommand{\\CJKrmdefault}{KRserif}% |
| \\renewcommand{\\CJKsfdefault}{KRsans}% |
| \\renewcommand{\\CJKttdefault}{KRmono}% |
| \\xeCJKsetup{CJKspace = true} % For inter-phrase space |
| } |
| \\newcommand{\\kerneldocEndKR}{\\endgroup} |
| \\newcommand{\\kerneldocBeginJP}{% |
| \\begingroup% |
| \\xeCJKDeclareCharClass{HalfLeft}{`“,`‘}% |
| \\xeCJKDeclareCharClass{HalfRight}{`”,`’}% |
| \\jpmain% |
| \\renewcommand{\\CJKrmdefault}{JPserif}% |
| \\renewcommand{\\CJKsfdefault}{JPsans}% |
| \\renewcommand{\\CJKttdefault}{JPmono}% |
| } |
| \\newcommand{\\kerneldocEndJP}{\\endgroup} |
| % Single spacing in literal blocks |
| \\fvset{baselinestretch=1} |
| % To customize \\sphinxtableofcontents |
| \\usepackage{etoolbox} |
| % Inactivate CJK after tableofcontents |
| \\apptocmd{\\sphinxtableofcontents}{\\kerneldocCJKoff}{}{} |
| }{ % No CJK font found |
| % Custom macros to on/off CJK (Dummy) |
| \\newcommand{\\kerneldocCJKon}{} |
| \\newcommand{\\kerneldocCJKoff}{} |
| \\newcommand{\\kerneldocBeginSC}{} |
| \\newcommand{\\kerneldocEndSC}{} |
| \\newcommand{\\kerneldocBeginTC}{} |
| \\newcommand{\\kerneldocEndTC}{} |
| \\newcommand{\\kerneldocBeginKR}{} |
| \\newcommand{\\kerneldocEndKR}{} |
| \\newcommand{\\kerneldocBeginJP}{} |
| \\newcommand{\\kerneldocEndJP}{} |
| } |
| ''' |
| |
| # Fix reference escape troubles with Sphinx 1.4.x |
| if major == 1: |
| latex_elements['preamble'] += '\\renewcommand*{\\DUrole}[2]{ #2 }\n' |
| |
| # With Sphinx 1.6, it is possible to change the Bg color directly |
| # by using: |
| # \definecolor{sphinxnoteBgColor}{RGB}{204,255,255} |
| # \definecolor{sphinxwarningBgColor}{RGB}{255,204,204} |
| # \definecolor{sphinxattentionBgColor}{RGB}{255,255,204} |
| # \definecolor{sphinximportantBgColor}{RGB}{192,255,204} |
| # |
| # However, it require to use sphinx heavy box with: |
| # |
| # \renewenvironment{sphinxlightbox} {% |
| # \\begin{sphinxheavybox} |
| # } |
| # \\end{sphinxheavybox} |
| # } |
| # |
| # Unfortunately, the implementation is buggy: if a note is inside a |
| # table, it isn't displayed well. So, for now, let's use boring |
| # black and white notes. |
| |
| # Grouping the document tree into LaTeX files. List of tuples |
| # (source start file, target name, title, |
| # author, documentclass [howto, manual, or own class]). |
| # Sorted in alphabetical order |
| latex_documents = [ |
| ] |
| |
| # Add all other index files from Documentation/ subdirectories |
| for fn in os.listdir('.'): |
| doc = os.path.join(fn, "index") |
| if os.path.exists(doc + ".rst"): |
| has = False |
| for l in latex_documents: |
| if l[0] == doc: |
| has = True |
| break |
| if not has: |
| latex_documents.append((doc, fn + '.tex', |
| 'Linux %s Documentation' % fn.capitalize(), |
| 'The kernel development community', |
| 'manual')) |
| |
| # The name of an image file (relative to this directory) to place at the top of |
| # the title page. |
| #latex_logo = None |
| |
| # For "manual" documents, if this is true, then toplevel headings are parts, |
| # not chapters. |
| #latex_use_parts = False |
| |
| # If true, show page references after internal links. |
| #latex_show_pagerefs = False |
| |
| # If true, show URL addresses after external links. |
| #latex_show_urls = False |
| |
| # Documents to append as an appendix to all manuals. |
| #latex_appendices = [] |
| |
| # If false, no module index is generated. |
| #latex_domain_indices = True |
| |
| |
| # -- Options for manual page output --------------------------------------- |
| |
| # One entry per manual page. List of tuples |
| # (source start file, name, description, authors, manual section). |
| man_pages = [ |
| (master_doc, 'thelinuxkernel', 'The Linux Kernel Documentation', |
| [author], 1) |
| ] |
| |
| # If true, show URL addresses after external links. |
| #man_show_urls = False |
| |
| |
| # -- Options for Texinfo output ------------------------------------------- |
| |
| # Grouping the document tree into Texinfo files. List of tuples |
| # (source start file, target name, title, author, |
| # dir menu entry, description, category) |
| texinfo_documents = [ |
| (master_doc, 'TheLinuxKernel', 'The Linux Kernel Documentation', |
| author, 'TheLinuxKernel', 'One line description of project.', |
| 'Miscellaneous'), |
| ] |
| |
| # Documents to append as an appendix to all manuals. |
| #texinfo_appendices = [] |
| |
| # If false, no module index is generated. |
| #texinfo_domain_indices = True |
| |
| # How to display URL addresses: 'footnote', 'no', or 'inline'. |
| #texinfo_show_urls = 'footnote' |
| |
| # If true, do not generate a @detailmenu in the "Top" node's menu. |
| #texinfo_no_detailmenu = False |
| |
| |
| # -- Options for Epub output ---------------------------------------------- |
| |
| # Bibliographic Dublin Core info. |
| epub_title = project |
| epub_author = author |
| epub_publisher = author |
| epub_copyright = copyright |
| |
| # The basename for the epub file. It defaults to the project name. |
| #epub_basename = project |
| |
| # The HTML theme for the epub output. Since the default themes are not |
| # optimized for small screen space, using the same theme for HTML and epub |
| # output is usually not wise. This defaults to 'epub', a theme designed to save |
| # visual space. |
| #epub_theme = 'epub' |
| |
| # The language of the text. It defaults to the language option |
| # or 'en' if the language is not set. |
| #epub_language = '' |
| |
| # The scheme of the identifier. Typical schemes are ISBN or URL. |
| #epub_scheme = '' |
| |
| # The unique identifier of the text. This can be a ISBN number |
| # or the project homepage. |
| #epub_identifier = '' |
| |
| # A unique identification for the text. |
| #epub_uid = '' |
| |
| # A tuple containing the cover image and cover page html template filenames. |
| #epub_cover = () |
| |
| # A sequence of (type, uri, title) tuples for the guide element of content.opf. |
| #epub_guide = () |
| |
| # HTML files that should be inserted before the pages created by sphinx. |
| # The format is a list of tuples containing the path and title. |
| #epub_pre_files = [] |
| |
| # HTML files that should be inserted after the pages created by sphinx. |
| # The format is a list of tuples containing the path and title. |
| #epub_post_files = [] |
| |
| # A list of files that should not be packed into the epub file. |
| epub_exclude_files = ['search.html'] |
| |
| # The depth of the table of contents in toc.ncx. |
| #epub_tocdepth = 3 |
| |
| # Allow duplicate toc entries. |
| #epub_tocdup = True |
| |
| # Choose between 'default' and 'includehidden'. |
| #epub_tocscope = 'default' |
| |
| # Fix unsupported image types using the Pillow. |
| #epub_fix_images = False |
| |
| # Scale large images. |
| #epub_max_image_width = 0 |
| |
| # How to display URL addresses: 'footnote', 'no', or 'inline'. |
| #epub_show_urls = 'inline' |
| |
| # If false, no index is generated. |
| #epub_use_index = True |
| |
| #======= |
| # rst2pdf |
| # |
| # Grouping the document tree into PDF files. List of tuples |
| # (source start file, target name, title, author, options). |
| # |
| # See the Sphinx chapter of https://ralsina.me/static/manual.pdf |
| # |
| # FIXME: Do not add the index file here; the result will be too big. Adding |
| # multiple PDF files here actually tries to get the cross-referencing right |
| # *between* PDF files. |
| pdf_documents = [ |
| ('kernel-documentation', u'Kernel', u'Kernel', u'J. Random Bozo'), |
| ] |
| |
| # kernel-doc extension configuration for running Sphinx directly (e.g. by Read |
| # the Docs). In a normal build, these are supplied from the Makefile via command |
| # line arguments. |
| kerneldoc_bin = '../scripts/kernel-doc' |
| kerneldoc_srctree = '..' |
| |
| # ------------------------------------------------------------------------------ |
| # Since loadConfig overwrites settings from the global namespace, it has to be |
| # the last statement in the conf.py file |
| # ------------------------------------------------------------------------------ |
| loadConfig(globals()) |