blob: b84baedda5f69a20d8665e39e084a3216ce7cd43 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2013-2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2018-2020 Linaro Ltd.
*/
#include <linux/types.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/qrtr.h>
#include <linux/soc/qcom/qmi.h>
#include "ipa.h"
#include "ipa_endpoint.h"
#include "ipa_mem.h"
#include "ipa_table.h"
#include "ipa_modem.h"
#include "ipa_qmi_msg.h"
/**
* DOC: AP/Modem QMI Handshake
*
* The AP and modem perform a "handshake" at initialization time to ensure
* both sides know when everything is ready to begin operating. The AP
* driver (this code) uses two QMI handles (endpoints) for this; a client
* using a service on the modem, and server to service modem requests (and
* to supply an indication message from the AP). Once the handshake is
* complete, the AP and modem may begin IPA operation. This occurs
* only when the AP IPA driver, modem IPA driver, and IPA microcontroller
* are ready.
*
* The QMI service on the modem expects to receive an INIT_DRIVER request from
* the AP, which contains parameters used by the modem during initialization.
* The AP sends this request as soon as it is knows the modem side service
* is available. The modem responds to this request, and if this response
* contains a success result, the AP knows the modem IPA driver is ready.
*
* The modem is responsible for loading firmware on the IPA microcontroller.
* This occurs only during the initial modem boot. The modem sends a
* separate DRIVER_INIT_COMPLETE request to the AP to report that the
* microcontroller is ready. The AP may assume the microcontroller is
* ready and remain so (even if the modem reboots) once it has received
* and responded to this request.
*
* There is one final exchange involved in the handshake. It is required
* on the initial modem boot, but optional (but in practice does occur) on
* subsequent boots. The modem expects to receive a final INIT_COMPLETE
* indication message from the AP when it is about to begin its normal
* operation. The AP will only send this message after it has received
* and responded to an INDICATION_REGISTER request from the modem.
*
* So in summary:
* - Whenever the AP learns the modem has booted and its IPA QMI service
* is available, it sends an INIT_DRIVER request to the modem. The
* modem supplies a success response when it is ready to operate.
* - On the initial boot, the modem sets up the IPA microcontroller, and
* sends a DRIVER_INIT_COMPLETE request to the AP when this is done.
* - When the modem is ready to receive an INIT_COMPLETE indication from
* the AP, it sends an INDICATION_REGISTER request to the AP.
* - On the initial modem boot, everything is ready when:
* - AP has received a success response from its INIT_DRIVER request
* - AP has responded to a DRIVER_INIT_COMPLETE request
* - AP has responded to an INDICATION_REGISTER request from the modem
* - AP has sent an INIT_COMPLETE indication to the modem
* - On subsequent modem boots, everything is ready when:
* - AP has received a success response from its INIT_DRIVER request
* - AP has responded to a DRIVER_INIT_COMPLETE request
* - The INDICATION_REGISTER request and INIT_COMPLETE indication are
* optional for non-initial modem boots, and have no bearing on the
* determination of when things are "ready"
*/
#define IPA_HOST_SERVICE_SVC_ID 0x31
#define IPA_HOST_SVC_VERS 1
#define IPA_HOST_SERVICE_INS_ID 1
#define IPA_MODEM_SERVICE_SVC_ID 0x31
#define IPA_MODEM_SERVICE_INS_ID 2
#define IPA_MODEM_SVC_VERS 1
#define QMI_INIT_DRIVER_TIMEOUT 60000 /* A minute in milliseconds */
/* Send an INIT_COMPLETE indication message to the modem */
static void ipa_server_init_complete(struct ipa_qmi *ipa_qmi)
{
struct ipa *ipa = container_of(ipa_qmi, struct ipa, qmi);
struct qmi_handle *qmi = &ipa_qmi->server_handle;
struct sockaddr_qrtr *sq = &ipa_qmi->modem_sq;
struct ipa_init_complete_ind ind = { };
int ret;
ind.status.result = QMI_RESULT_SUCCESS_V01;
ind.status.error = QMI_ERR_NONE_V01;
ret = qmi_send_indication(qmi, sq, IPA_QMI_INIT_COMPLETE,
IPA_QMI_INIT_COMPLETE_IND_SZ,
ipa_init_complete_ind_ei, &ind);
if (ret)
dev_err(&ipa->pdev->dev,
"error %d sending init complete indication\n", ret);
else
ipa_qmi->indication_sent = true;
}
/* If requested (and not already sent) send the INIT_COMPLETE indication */
static void ipa_qmi_indication(struct ipa_qmi *ipa_qmi)
{
if (!ipa_qmi->indication_requested)
return;
if (ipa_qmi->indication_sent)
return;
ipa_server_init_complete(ipa_qmi);
}
/* Determine whether everything is ready to start normal operation.
* We know everything (else) is ready when we know the IPA driver on
* the modem is ready, and the microcontroller is ready.
*
* When the modem boots (or reboots), the handshake sequence starts
* with the AP sending the modem an INIT_DRIVER request. Within
* that request, the uc_loaded flag will be zero (false) for an
* initial boot, non-zero (true) for a subsequent (SSR) boot.
*/
static void ipa_qmi_ready(struct ipa_qmi *ipa_qmi)
{
struct ipa *ipa = container_of(ipa_qmi, struct ipa, qmi);
int ret;
/* We aren't ready until the modem and microcontroller are */
if (!ipa_qmi->modem_ready || !ipa_qmi->uc_ready)
return;
/* Send the indication message if it was requested */
ipa_qmi_indication(ipa_qmi);
/* The initial boot requires us to send the indication. */
if (ipa_qmi->initial_boot) {
if (!ipa_qmi->indication_sent)
return;
/* The initial modem boot completed successfully */
ipa_qmi->initial_boot = false;
}
/* We're ready. Start up normal operation */
ipa = container_of(ipa_qmi, struct ipa, qmi);
ret = ipa_modem_start(ipa);
if (ret)
dev_err(&ipa->pdev->dev, "error %d starting modem\n", ret);
}
/* All QMI clients from the modem node are gone (modem shut down or crashed). */
static void ipa_server_bye(struct qmi_handle *qmi, unsigned int node)
{
struct ipa_qmi *ipa_qmi;
ipa_qmi = container_of(qmi, struct ipa_qmi, server_handle);
/* The modem client and server go away at the same time */
memset(&ipa_qmi->modem_sq, 0, sizeof(ipa_qmi->modem_sq));
/* initial_boot doesn't change when modem reboots */
/* uc_ready doesn't change when modem reboots */
ipa_qmi->modem_ready = false;
ipa_qmi->indication_requested = false;
ipa_qmi->indication_sent = false;
}
static const struct qmi_ops ipa_server_ops = {
.bye = ipa_server_bye,
};
/* Callback function to handle an INDICATION_REGISTER request message from the
* modem. This informs the AP that the modem is now ready to receive the
* INIT_COMPLETE indication message.
*/
static void ipa_server_indication_register(struct qmi_handle *qmi,
struct sockaddr_qrtr *sq,
struct qmi_txn *txn,
const void *decoded)
{
struct ipa_indication_register_rsp rsp = { };
struct ipa_qmi *ipa_qmi;
struct ipa *ipa;
int ret;
ipa_qmi = container_of(qmi, struct ipa_qmi, server_handle);
ipa = container_of(ipa_qmi, struct ipa, qmi);
rsp.rsp.result = QMI_RESULT_SUCCESS_V01;
rsp.rsp.error = QMI_ERR_NONE_V01;
ret = qmi_send_response(qmi, sq, txn, IPA_QMI_INDICATION_REGISTER,
IPA_QMI_INDICATION_REGISTER_RSP_SZ,
ipa_indication_register_rsp_ei, &rsp);
if (!ret) {
ipa_qmi->indication_requested = true;
ipa_qmi_ready(ipa_qmi); /* We might be ready now */
} else {
dev_err(&ipa->pdev->dev,
"error %d sending register indication response\n", ret);
}
}
/* Respond to a DRIVER_INIT_COMPLETE request message from the modem. */
static void ipa_server_driver_init_complete(struct qmi_handle *qmi,
struct sockaddr_qrtr *sq,
struct qmi_txn *txn,
const void *decoded)
{
struct ipa_driver_init_complete_rsp rsp = { };
struct ipa_qmi *ipa_qmi;
struct ipa *ipa;
int ret;
ipa_qmi = container_of(qmi, struct ipa_qmi, server_handle);
ipa = container_of(ipa_qmi, struct ipa, qmi);
rsp.rsp.result = QMI_RESULT_SUCCESS_V01;
rsp.rsp.error = QMI_ERR_NONE_V01;
ret = qmi_send_response(qmi, sq, txn, IPA_QMI_DRIVER_INIT_COMPLETE,
IPA_QMI_DRIVER_INIT_COMPLETE_RSP_SZ,
ipa_driver_init_complete_rsp_ei, &rsp);
if (!ret) {
ipa_qmi->uc_ready = true;
ipa_qmi_ready(ipa_qmi); /* We might be ready now */
} else {
dev_err(&ipa->pdev->dev,
"error %d sending init complete response\n", ret);
}
}
/* The server handles two request message types sent by the modem. */
static const struct qmi_msg_handler ipa_server_msg_handlers[] = {
{
.type = QMI_REQUEST,
.msg_id = IPA_QMI_INDICATION_REGISTER,
.ei = ipa_indication_register_req_ei,
.decoded_size = IPA_QMI_INDICATION_REGISTER_REQ_SZ,
.fn = ipa_server_indication_register,
},
{
.type = QMI_REQUEST,
.msg_id = IPA_QMI_DRIVER_INIT_COMPLETE,
.ei = ipa_driver_init_complete_req_ei,
.decoded_size = IPA_QMI_DRIVER_INIT_COMPLETE_REQ_SZ,
.fn = ipa_server_driver_init_complete,
},
{ },
};
/* Handle an INIT_DRIVER response message from the modem. */
static void ipa_client_init_driver(struct qmi_handle *qmi,
struct sockaddr_qrtr *sq,
struct qmi_txn *txn, const void *decoded)
{
txn->result = 0; /* IPA_QMI_INIT_DRIVER request was successful */
complete(&txn->completion);
}
/* The client handles one response message type sent by the modem. */
static const struct qmi_msg_handler ipa_client_msg_handlers[] = {
{
.type = QMI_RESPONSE,
.msg_id = IPA_QMI_INIT_DRIVER,
.ei = ipa_init_modem_driver_rsp_ei,
.decoded_size = IPA_QMI_INIT_DRIVER_RSP_SZ,
.fn = ipa_client_init_driver,
},
{ },
};
/* Return a pointer to an init modem driver request structure, which contains
* configuration parameters for the modem. The modem may be started multiple
* times, but generally these parameters don't change so we can reuse the
* request structure once it's initialized. The only exception is the
* skip_uc_load field, which will be set only after the microcontroller has
* reported it has completed its initialization.
*/
static const struct ipa_init_modem_driver_req *
init_modem_driver_req(struct ipa_qmi *ipa_qmi)
{
struct ipa *ipa = container_of(ipa_qmi, struct ipa, qmi);
static struct ipa_init_modem_driver_req req;
const struct ipa_mem *mem;
/* The microcontroller is initialized on the first boot */
req.skip_uc_load_valid = 1;
req.skip_uc_load = ipa->uc_loaded ? 1 : 0;
/* We only have to initialize most of it once */
if (req.platform_type_valid)
return &req;
req.platform_type_valid = 1;
req.platform_type = IPA_QMI_PLATFORM_TYPE_MSM_ANDROID;
mem = ipa_mem_find(ipa, IPA_MEM_MODEM_HEADER);
if (mem->size) {
req.hdr_tbl_info_valid = 1;
req.hdr_tbl_info.start = ipa->mem_offset + mem->offset;
req.hdr_tbl_info.end = req.hdr_tbl_info.start + mem->size - 1;
}
mem = ipa_mem_find(ipa, IPA_MEM_V4_ROUTE);
req.v4_route_tbl_info_valid = 1;
req.v4_route_tbl_info.start = ipa->mem_offset + mem->offset;
req.v4_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1;
mem = ipa_mem_find(ipa, IPA_MEM_V6_ROUTE);
req.v6_route_tbl_info_valid = 1;
req.v6_route_tbl_info.start = ipa->mem_offset + mem->offset;
req.v6_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1;
mem = ipa_mem_find(ipa, IPA_MEM_V4_FILTER);
req.v4_filter_tbl_start_valid = 1;
req.v4_filter_tbl_start = ipa->mem_offset + mem->offset;
mem = ipa_mem_find(ipa, IPA_MEM_V6_FILTER);
req.v6_filter_tbl_start_valid = 1;
req.v6_filter_tbl_start = ipa->mem_offset + mem->offset;
mem = ipa_mem_find(ipa, IPA_MEM_MODEM);
if (mem->size) {
req.modem_mem_info_valid = 1;
req.modem_mem_info.start = ipa->mem_offset + mem->offset;
req.modem_mem_info.size = mem->size;
}
req.ctrl_comm_dest_end_pt_valid = 1;
req.ctrl_comm_dest_end_pt =
ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]->endpoint_id;
/* skip_uc_load_valid and skip_uc_load are set above */
mem = ipa_mem_find(ipa, IPA_MEM_MODEM_PROC_CTX);
if (mem->size) {
req.hdr_proc_ctx_tbl_info_valid = 1;
req.hdr_proc_ctx_tbl_info.start =
ipa->mem_offset + mem->offset;
req.hdr_proc_ctx_tbl_info.end =
req.hdr_proc_ctx_tbl_info.start + mem->size - 1;
}
/* Nothing to report for the compression table (zip_tbl_info) */
mem = ipa_mem_find(ipa, IPA_MEM_V4_ROUTE_HASHED);
if (mem->size) {
req.v4_hash_route_tbl_info_valid = 1;
req.v4_hash_route_tbl_info.start =
ipa->mem_offset + mem->offset;
req.v4_hash_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1;
}
mem = ipa_mem_find(ipa, IPA_MEM_V6_ROUTE_HASHED);
if (mem->size) {
req.v6_hash_route_tbl_info_valid = 1;
req.v6_hash_route_tbl_info.start =
ipa->mem_offset + mem->offset;
req.v6_hash_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1;
}
mem = ipa_mem_find(ipa, IPA_MEM_V4_FILTER_HASHED);
if (mem->size) {
req.v4_hash_filter_tbl_start_valid = 1;
req.v4_hash_filter_tbl_start = ipa->mem_offset + mem->offset;
}
mem = ipa_mem_find(ipa, IPA_MEM_V6_FILTER_HASHED);
if (mem->size) {
req.v6_hash_filter_tbl_start_valid = 1;
req.v6_hash_filter_tbl_start = ipa->mem_offset + mem->offset;
}
/* The stats fields are only valid for IPA v4.0+ */
if (ipa->version >= IPA_VERSION_4_0) {
mem = ipa_mem_find(ipa, IPA_MEM_STATS_QUOTA_MODEM);
if (mem->size) {
req.hw_stats_quota_base_addr_valid = 1;
req.hw_stats_quota_base_addr =
ipa->mem_offset + mem->offset;
req.hw_stats_quota_size_valid = 1;
req.hw_stats_quota_size = ipa->mem_offset + mem->size;
}
/* If the DROP stats region is defined, include it */
mem = ipa_mem_find(ipa, IPA_MEM_STATS_DROP);
if (mem && mem->size) {
req.hw_stats_drop_base_addr_valid = 1;
req.hw_stats_drop_base_addr =
ipa->mem_offset + mem->offset;
req.hw_stats_drop_size_valid = 1;
req.hw_stats_drop_size = ipa->mem_offset + mem->size;
}
}
return &req;
}
/* Send an INIT_DRIVER request to the modem, and wait for it to complete. */
static void ipa_client_init_driver_work(struct work_struct *work)
{
unsigned long timeout = msecs_to_jiffies(QMI_INIT_DRIVER_TIMEOUT);
const struct ipa_init_modem_driver_req *req;
struct ipa_qmi *ipa_qmi;
struct qmi_handle *qmi;
struct qmi_txn txn;
struct device *dev;
struct ipa *ipa;
int ret;
ipa_qmi = container_of(work, struct ipa_qmi, init_driver_work);
qmi = &ipa_qmi->client_handle;
ipa = container_of(ipa_qmi, struct ipa, qmi);
dev = &ipa->pdev->dev;
ret = qmi_txn_init(qmi, &txn, NULL, NULL);
if (ret < 0) {
dev_err(dev, "error %d preparing init driver request\n", ret);
return;
}
/* Send the request, and if successful wait for its response */
req = init_modem_driver_req(ipa_qmi);
ret = qmi_send_request(qmi, &ipa_qmi->modem_sq, &txn,
IPA_QMI_INIT_DRIVER, IPA_QMI_INIT_DRIVER_REQ_SZ,
ipa_init_modem_driver_req_ei, req);
if (ret)
dev_err(dev, "error %d sending init driver request\n", ret);
else if ((ret = qmi_txn_wait(&txn, timeout)))
dev_err(dev, "error %d awaiting init driver response\n", ret);
if (!ret) {
ipa_qmi->modem_ready = true;
ipa_qmi_ready(ipa_qmi); /* We might be ready now */
} else {
/* If any error occurs we need to cancel the transaction */
qmi_txn_cancel(&txn);
}
}
/* The modem server is now available. We will send an INIT_DRIVER request
* to the modem, but can't wait for it to complete in this callback thread.
* Schedule a worker on the global workqueue to do that for us.
*/
static int
ipa_client_new_server(struct qmi_handle *qmi, struct qmi_service *svc)
{
struct ipa_qmi *ipa_qmi;
ipa_qmi = container_of(qmi, struct ipa_qmi, client_handle);
ipa_qmi->modem_sq.sq_family = AF_QIPCRTR;
ipa_qmi->modem_sq.sq_node = svc->node;
ipa_qmi->modem_sq.sq_port = svc->port;
schedule_work(&ipa_qmi->init_driver_work);
return 0;
}
static const struct qmi_ops ipa_client_ops = {
.new_server = ipa_client_new_server,
};
/* Set up for QMI message exchange */
int ipa_qmi_setup(struct ipa *ipa)
{
struct ipa_qmi *ipa_qmi = &ipa->qmi;
int ret;
ipa_qmi->initial_boot = true;
/* The server handle is used to handle the DRIVER_INIT_COMPLETE
* request on the first modem boot. It also receives the
* INDICATION_REGISTER request on the first boot and (optionally)
* subsequent boots. The INIT_COMPLETE indication message is
* sent over the server handle if requested.
*/
ret = qmi_handle_init(&ipa_qmi->server_handle,
IPA_QMI_SERVER_MAX_RCV_SZ, &ipa_server_ops,
ipa_server_msg_handlers);
if (ret)
return ret;
ret = qmi_add_server(&ipa_qmi->server_handle, IPA_HOST_SERVICE_SVC_ID,
IPA_HOST_SVC_VERS, IPA_HOST_SERVICE_INS_ID);
if (ret)
goto err_server_handle_release;
/* The client handle is only used for sending an INIT_DRIVER request
* to the modem, and receiving its response message.
*/
ret = qmi_handle_init(&ipa_qmi->client_handle,
IPA_QMI_CLIENT_MAX_RCV_SZ, &ipa_client_ops,
ipa_client_msg_handlers);
if (ret)
goto err_server_handle_release;
/* We need this ready before the service lookup is added */
INIT_WORK(&ipa_qmi->init_driver_work, ipa_client_init_driver_work);
ret = qmi_add_lookup(&ipa_qmi->client_handle, IPA_MODEM_SERVICE_SVC_ID,
IPA_MODEM_SVC_VERS, IPA_MODEM_SERVICE_INS_ID);
if (ret)
goto err_client_handle_release;
return 0;
err_client_handle_release:
/* Releasing the handle also removes registered lookups */
qmi_handle_release(&ipa_qmi->client_handle);
memset(&ipa_qmi->client_handle, 0, sizeof(ipa_qmi->client_handle));
err_server_handle_release:
/* Releasing the handle also removes registered services */
qmi_handle_release(&ipa_qmi->server_handle);
memset(&ipa_qmi->server_handle, 0, sizeof(ipa_qmi->server_handle));
return ret;
}
/* Tear down IPA QMI handles */
void ipa_qmi_teardown(struct ipa *ipa)
{
cancel_work_sync(&ipa->qmi.init_driver_work);
qmi_handle_release(&ipa->qmi.client_handle);
memset(&ipa->qmi.client_handle, 0, sizeof(ipa->qmi.client_handle));
qmi_handle_release(&ipa->qmi.server_handle);
memset(&ipa->qmi.server_handle, 0, sizeof(ipa->qmi.server_handle));
}