Google Git
Sign in
android / kernel / common / 4154968fe8419811b830d7840f0f44b94f61e373
commit4154968fe8419811b830d7840f0f44b94f61e373[log] [tgz]
authorGreg Kroah-Hartman <gregkh@google.com>Tue May 17 22:11:19 2022 +0200
committerGreg Kroah-Hartman <gregkh@google.com>Wed May 18 09:00:50 2022 +0200
treebc06e9d8d2137cba02669aeedf2b341efb9c55c5
parentd6d4ce0cc52163068f523630d8acc2112ae04676 [diff]
parent3fbf24b73f4a5bc8fd39a6b7a29145451c1039ce [diff]
Merge 5.15.38 into android13-5.15

Changes in 5.15.38
	usb: mtu3: fix USB 3.0 dual-role-switch from device to host
	USB: quirks: add a Realtek card reader
	USB: quirks: add STRING quirk for VCOM device
	USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
	USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
	USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
	USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
	usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
	xhci: Enable runtime PM on second Alderlake controller
	xhci: stop polling roothubs after shutdown
	xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms
	iio: dac: ad5592r: Fix the missing return value.
	iio: dac: ad5446: Fix read_raw not returning set value
	iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
	iio: imu: inv_icm42600: Fix I2C init possible nack
	usb: misc: fix improper handling of refcount in uss720_probe()
	usb: core: Don't hold the device lock while sleeping in do_proc_control()
	usb: typec: ucsi: Fix reuse of completion structure
	usb: typec: ucsi: Fix role swapping
	usb: gadget: uvc: Fix crash when encoding data for usb request
	usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
	usb: dwc3: Try usb-role-switch first in dwc3_drd_init
	usb: dwc3: core: Fix tx/rx threshold settings
	usb: dwc3: core: Only handle soft-reset in DCTL
	usb: dwc3: gadget: Return proper request status
	usb: dwc3: pci: add support for the Intel Meteor Lake-P
	usb: cdns3: Fix issue for clear halt endpoint
	usb: phy: generic: Get the vbus supply
	serial: imx: fix overrun interrupts in DMA mode
	serial: amba-pl011: do not time out prematurely when draining tx fifo
	serial: 8250: Also set sticky MCR bits in console restoration
	serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
	arch_topology: Do not set llc_sibling if llc_id is invalid
	ceph: fix possible NULL pointer dereference for req->r_session
	bus: mhi: host: pci_generic: Add missing poweroff() PM callback
	bus: mhi: host: pci_generic: Flush recovery worker during freeze
	arm64: dts: imx8mm-venice: fix spi2 pin configuration
	pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config
	hex2bin: make the function hex_to_bin constant-time
	hex2bin: fix access beyond string end
	riscv: patch_text: Fixup last cpu should be master
	x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
	iocost: don't reset the inuse weight of under-weighted debtors
	virtio_net: fix wrong buf address calculation when using xdp
	cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
	cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
	video: fbdev: udlfb: properly check endpoint type
	arm64: dts: meson: remove CPU opps below 1GHz for G12B boards
	arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards
	iio:imu:bmi160: disable regulator in error path
	mtd: rawnand: fix ecc parameters for mt7622
	xsk: Fix l2fwd for copy mode + busy poll combo
	arm64: dts: imx8qm: Correct SCU clock controller's compatible property
	USB: Fix xhci event ring dequeue pointer ERDP update issue
	ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
	arm64: dts: imx8mn: Fix SAI nodes
	arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1
	phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
	phy: samsung: exynos5250-sata: fix missing device put in probe error paths
	ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
	bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific
	ARM: dts: dra7: Fix suspend warning for vpe powerdomain
	phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks
	ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
	ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
	ARM: dts: at91: fix pinctrl phandles
	phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe
	phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe
	interconnect: qcom: sdx55: Drop IP0 interconnects
	ARM: dts: Fix mmc order for omap3-gta04
	ARM: dts: am3517-evm: Fix misc pinmuxing
	ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
	ipvs: correctly print the memory size of ip_vs_conn_tab
	phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()
	pinctrl: mediatek: moore: Fix build error
	mtd: rawnand: Fix return value check of wait_for_completion_timeout
	mtd: fix 'part' field data corruption in mtd_info
	pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI
	memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
	net: dsa: Add missing of_node_put() in dsa_port_link_register_of
	netfilter: nft_set_rbtree: overlap detection with element re-addition after deletion
	bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
	pinctrl: rockchip: fix RK3308 pinmux bits
	tcp: md5: incorrect tcp_header_len for incoming connections
	pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested
	tcp: ensure to use the most recently sent skb when filling the rate sample
	wireguard: device: check for metadata_dst with skb_valid_dst()
	sctp: check asoc strreset_chunk in sctp_generate_reconf_event
	ARM: dts: imx6ull-colibri: fix vqmmc regulator
	arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
	pinctrl: pistachio: fix use of irq_of_parse_and_map()
	cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
	net: hns3: clear inited state and stop client after failed to register netdev
	net: hns3: modify the return code of hclge_get_ring_chain_from_mbx
	net: hns3: add validity check for message data length
	net: hns3: add return value for mailbox handling in PF
	net/smc: sync err code when tcp connection was refused
	ip_gre: Make o_seqno start from 0 in native mode
	ip6_gre: Make o_seqno start from 0 in native mode
	ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode
	tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
	tcp: make sure treq->af_specific is initialized
	bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
	clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
	cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
	net: bcmgenet: hide status block before TX timestamping
	net: phy: marvell10g: fix return value on error
	net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addr
	drm/sun4i: Remove obsolete references to PHYS_OFFSET
	net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
	io_uring: check reserved fields for send/sendmsg
	io_uring: check reserved fields for recv/recvmsg
	netfilter: conntrack: fix udp offload timeout sysctl
	drm/amdkfd: Fix GWS queue count
	drm/amd/display: Fix memory leak in dcn21_clock_source_create
	tls: Skip tls_append_frag on zero copy size
	bnx2x: fix napi API usage sequence
	net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
	gfs2: Prevent endless loops in gfs2_file_buffered_write
	gfs2: Minor retry logic cleanup
	gfs2: Make sure not to return short direct writes
	gfs2: No short reads or writes upon glock contention
	perf arm-spe: Fix addresses of synthesized SPE events
	ixgbe: ensure IPsec VF<->PF compatibility
	Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
	tcp: fix F-RTO may not work correctly when receiving DSACK
	ASoC: Intel: soc-acpi: correct device endpoints for max98373
	ASoC: wm8731: Disable the regulator when probing fails
	ext4: fix bug_on in start_this_handle during umount filesystem
	arch: xtensa: platforms: Fix deadlock in rs_close()
	ksmbd: increment reference count of parent fp
	ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
	bonding: do not discard lowest hash bit for non layer3+4 hashing
	x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
	cifs: destage any unwritten data to the server before calling copychunk_write
	drivers: net: hippi: Fix deadlock in rr_close()
	powerpc/perf: Fix 32bit compile
	selftest/vm: verify mmap addr in mremap_test
	selftest/vm: verify remap destination address in mremap_test
	Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"
	zonefs: Fix management of open zones
	zonefs: Clear inode information flags on inode creation
	kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
	mtd: rawnand: qcom: fix memory corruption that causes panic
	netfilter: Update ip6_route_me_harder to consider L3 domain
	drm/i915: Check EDID for HDR static metadata when choosing blc
	drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses
	net: ethernet: stmmac: fix write to sgmii_adapter_base
	ACPI: processor: idle: Avoid falling back to C3 type C-states
	thermal: int340x: Fix attr.show callback prototype
	btrfs: fix leaked plug after failure syncing log on zoned filesystems
	ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
	ARM: dts: imx8mm-venice-gw{71xx,72xx,73xx}: fix OTG controller OC mode
	x86/cpu: Load microcode during restore_processor_state()
	perf symbol: Pass is_kallsyms to symbols__fixup_end()
	perf symbol: Update symbols__fixup_end()
	tty: n_gsm: fix restart handling via CLD command
	tty: n_gsm: fix decoupled mux resource
	tty: n_gsm: fix mux cleanup after unregister tty device
	tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
	tty: n_gsm: fix malformed counter for out of frame data
	netfilter: nft_socket: only do sk lookups when indev is available
	tty: n_gsm: fix insufficient txframe size
	tty: n_gsm: fix wrong DLCI release order
	tty: n_gsm: fix missing explicit ldisc flush
	tty: n_gsm: fix wrong command retry handling
	tty: n_gsm: fix wrong command frame length field encoding
	tty: n_gsm: fix wrong signal octets encoding in MSC
	tty: n_gsm: fix missing tty wakeup in convergence layer type 2
	tty: n_gsm: fix reset fifo race condition
	tty: n_gsm: fix incorrect UA handling
	tty: n_gsm: fix software flow control handling
	perf symbol: Remove arch__symbols__fixup_end()
	eeprom: at25: Use DMA safe buffers
	objtool: Fix code relocs vs weak symbols
	objtool: Fix type of reloc::addend
	powerpc/64: Add UADDR64 relocation support
	Linux 5.15.38

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic5e398d47dd6240ecde38f635b3085fae7c3c0ab
tree: bc06e9d8d2137cba02669aeedf2b341efb9c55c5
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. ipc/
  12. kernel/
  13. lib/
  14. LICENSES/
  15. mm/
  16. net/
  17. samples/
  18. scripts/
  19. security/
  20. sound/
  21. tools/
  22. usr/
  23. virt/
  24. .clang-format
  25. .cocciconfig
  26. .get_maintainer.ignore
  27. .gitattributes
  28. .gitignore
  29. .mailmap
  30. BUILD.bazel
  31. build.config.aarch64
  32. build.config.allmodconfig
  33. build.config.allmodconfig.aarch64
  34. build.config.allmodconfig.arm
  35. build.config.allmodconfig.x86_64
  36. build.config.amlogic
  37. build.config.arm
  38. build.config.common
  39. build.config.constants
  40. build.config.db845c
  41. build.config.gce.x86_64
  42. build.config.gki
  43. build.config.gki-debug.aarch64
  44. build.config.gki-debug.x86_64
  45. build.config.gki.aarch64
  46. build.config.gki.aarch64.fips140
  47. build.config.gki.x86_64
  48. build.config.gki_kasan
  49. build.config.gki_kasan.aarch64
  50. build.config.gki_kasan.x86_64
  51. build.config.gki_kprobes
  52. build.config.gki_kprobes.aarch64
  53. build.config.gki_kprobes.x86_64
  54. build.config.khwasan
  55. build.config.rockpi4
  56. build.config.x86_64
  57. COPYING
  58. CREDITS
  59. Kbuild
  60. Kconfig
  61. Kconfig.ext
  62. MAINTAINERS
  63. Makefile
  64. OWNERS
  65. README
  66. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass scripts/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)