blob: 21f457b56c016a7c67b4a2e73b42048af197e9ca [file] [log] [blame]
config ARCH_SHMOBILE
bool
config PM_RCAR
bool
config PM_RMOBILE
bool
config ARCH_RCAR_GEN1
bool
select PM_RCAR if PM || SMP
select RENESAS_INTC_IRQPIN
select SYS_SUPPORTS_SH_TMU
config ARCH_RCAR_GEN2
bool
select PM_RCAR if PM || SMP
select RENESAS_IRQC
select SYS_SUPPORTS_SH_CMT
config ARCH_RMOBILE
bool
select PM_RMOBILE if PM && !ARCH_SHMOBILE_MULTI
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
menuconfig ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARM_GIC
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select NO_IOPORT_MAP
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_OPP
if ARCH_SHMOBILE_MULTI
#comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select SYS_SUPPORTS_SH_MTU2
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
select RENESAS_INTC_IRQPIN
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_RCAR_GEN2
config ARCH_R8A7791
bool "R-Car M2-W (R8A77910)"
select ARCH_RCAR_GEN2
config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
comment "Renesas ARM SoCs Board Type"
config MACH_KOELSCH
bool "Koelsch board"
depends on ARCH_R8A7791
select MICREL_PHY if SH_ETH
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
select MICREL_PHY if SH_ETH
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
select REGULATOR_FIXED_VOLTAGE if REGULATOR
comment "Renesas ARM SoCs System Configuration"
endif
if ARCH_SHMOBILE_LEGACY
comment "Renesas ARM SoCs System Type"
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select SH_INTC
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select I2C
select SH_INTC
select RENESAS_INTC_IRQPIN
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select RENESAS_INTC_IRQPIN
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_RCAR_GEN2
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select MIGHT_HAVE_PCI
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
config ARCH_R8A7791
bool "R-Car M2-W (R8A77910)"
select ARCH_RCAR_GEN2
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select MIGHT_HAVE_PCI
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
comment "Renesas ARM SoCs Board Type"
config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
select SMSC_PHY if SMSC911X
select USE_OF
config MACH_APE6EVM_REFERENCE
bool "APE6EVM board - Reference Device Tree Implementation"
depends on ARCH_R8A73A4
select SMSC_PHY if SMSC911X
select USE_OF
---help---
Use reference implementation of APE6EVM board support
which makes a greater use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SMSC_PHY if SMSC911X
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SMSC_PHY if SH_ETH
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4554 if SND_SIMPLE_CARD
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
config MACH_BOCKW_REFERENCE
bool "BOCK-W - Reference Device Tree Implementation"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
Use reference implementation of BockW board support
which makes use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
select USE_OF
select MICREL_PHY if SH_ETH
select SND_SOC_AK4642 if SND_SIMPLE_CARD
config MACH_KOELSCH
bool "Koelsch board"
depends on ARCH_R8A7791
select USE_OF
select MICREL_PHY if SH_ETH
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
config MACH_KZM9G_REFERENCE
bool "KZM-A9-GT board - Reference Device Tree Implementation"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
---help---
Use reference implementation of KZM-A9-GT board support
which makes as greater use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
comment "Renesas ARM SoCs System Configuration"
config CPU_HAS_INTEVT
bool
default y
config SH_CLK_CPG
bool
source "drivers/sh/Kconfig"
endif
if ARCH_SHMOBILE
menu "Timer and clock configuration"
config SHMOBILE_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
default "128"
help
Allows the configuration of the timer frequency. It is customary
to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
case of low timer frequencies other values may be more suitable.
Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
want to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
endmenu
endif