diff --git a/Makefile b/Makefile
index 3cccc51..1b71b11 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 147
+SUBLEVEL = 148
 EXTRAVERSION =
 NAME = Roaring Lionus
 
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index 6d9b455..d5b2a08 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -172,6 +172,8 @@
 	struct mtrr_gentry gentry;
 	void __user *arg = (void __user *) __arg;
 
+	memset(&gentry, 0, sizeof(gentry));
+
 	switch (cmd) {
 	case MTRRIOC_ADD_ENTRY:
 	case MTRRIOC_SET_ENTRY:
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index ae52ef05..769831d9 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -342,10 +342,10 @@
 			sanitize_restored_xstate(tsk, &env, xfeatures, fx_only);
 		}
 
+		local_bh_disable();
 		fpu->fpstate_active = 1;
-		preempt_disable();
 		fpu__restore(fpu);
-		preempt_enable();
+		local_bh_enable();
 
 		return err;
 	} else {
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 46fe924..af1d26f 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -63,10 +63,18 @@
 		unsigned int req_sects;
 		sector_t end_sect, tmp;
 
-		/* Make sure bi_size doesn't overflow */
-		req_sects = min_t(sector_t, nr_sects, UINT_MAX >> 9);
+		/*
+		 * Issue in chunks of the user defined max discard setting,
+		 * ensuring that bi_size doesn't overflow
+		 */
+		req_sects = min_t(sector_t, nr_sects,
+					q->limits.max_discard_sectors);
+		if (!req_sects)
+			goto fail;
+		if (req_sects > UINT_MAX >> 9)
+			req_sects = UINT_MAX >> 9;
 
-		/**
+		/*
 		 * If splitting a request, and the next starting sector would be
 		 * misaligned, stop the discard at the previous aligned sector.
 		 */
@@ -100,6 +108,14 @@
 
 	*biop = bio;
 	return 0;
+
+fail:
+	if (bio) {
+		submit_bio_wait(bio);
+		bio_put(bio);
+	}
+	*biop = NULL;
+	return -EOPNOTSUPP;
 }
 EXPORT_SYMBOL(__blkdev_issue_discard);
 
diff --git a/drivers/gpio/gpio-max7301.c b/drivers/gpio/gpio-max7301.c
index 05813fb..647dfbb 100644
--- a/drivers/gpio/gpio-max7301.c
+++ b/drivers/gpio/gpio-max7301.c
@@ -25,7 +25,7 @@
 	struct spi_device *spi = to_spi_device(dev);
 	u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
 
-	return spi_write(spi, (const u8 *)&word, sizeof(word));
+	return spi_write_then_read(spi, &word, sizeof(word), NULL, 0);
 }
 
 /* A read from the MAX7301 means two transfers; here, one message each */
@@ -37,14 +37,8 @@
 	struct spi_device *spi = to_spi_device(dev);
 
 	word = 0x8000 | (reg << 8);
-	ret = spi_write(spi, (const u8 *)&word, sizeof(word));
-	if (ret)
-		return ret;
-	/*
-	 * This relies on the fact, that a transfer with NULL tx_buf shifts out
-	 * zero bytes (=NOOP for MAX7301)
-	 */
-	ret = spi_read(spi, (u8 *)&word, sizeof(word));
+	ret = spi_write_then_read(spi, &word, sizeof(word), &word,
+				  sizeof(word));
 	if (ret)
 		return ret;
 	return word & 0xff;
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 71c3473..04b26ca 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -36,6 +36,7 @@
 
 #include <linux/pci.h>
 #include <linux/export.h>
+#include <linux/nospec.h>
 
 /**
  * DOC: getunique and setversion story
@@ -668,13 +669,17 @@
 
 	if (is_driver_ioctl) {
 		/* driver ioctl */
-		if (nr - DRM_COMMAND_BASE >= dev->driver->num_ioctls)
+		unsigned int index = nr - DRM_COMMAND_BASE;
+
+		if (index >= dev->driver->num_ioctls)
 			goto err_i1;
-		ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
+		index = array_index_nospec(index, dev->driver->num_ioctls);
+		ioctl = &dev->driver->ioctls[index];
 	} else {
 		/* core ioctl */
 		if (nr >= DRM_CORE_IOCTL_COUNT)
 			goto err_i1;
+		nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
 		ioctl = &drm_ioctls[nr];
 	}
 
@@ -770,6 +775,7 @@
 
 	if (nr >= DRM_CORE_IOCTL_COUNT)
 		return false;
+	nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
 
 	*flags = drm_ioctls[nr].flags;
 	return true;
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 0276d2e..9a0d0d0 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -317,6 +317,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.current_interrupt_mask);
 }
@@ -330,6 +332,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.current_read_index);
 }
@@ -344,6 +348,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.current_write_index);
 }
@@ -358,6 +364,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.bytes_avail_toread);
 }
@@ -372,6 +380,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.bytes_avail_towrite);
 }
@@ -385,6 +395,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.current_interrupt_mask);
 }
@@ -398,6 +410,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.current_read_index);
 }
@@ -411,6 +425,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.current_write_index);
 }
@@ -425,6 +441,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.bytes_avail_toread);
 }
@@ -439,6 +457,8 @@
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.bytes_avail_towrite);
 }
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index fe7c6ec..2a44a2c3 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1763,8 +1763,8 @@
 
 	list_for_each_entry(ch, &sdev->rch_list, list) {
 		if (srpt_disconnect_ch(ch) >= 0)
-			pr_info("Closing channel %s-%d because target %s has been disabled\n",
-				ch->sess_name, ch->qp->qp_num,
+			pr_info("Closing channel %s because target %s has been disabled\n",
+				ch->sess_name,
 				sdev->device->name);
 		srpt_close_ch(ch);
 	}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3e5954f..675c6f2 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -27,6 +27,7 @@
 #include "sd_ops.h"
 
 #define DEFAULT_CMD6_TIMEOUT_MS	500
+#define MIN_CACHE_EN_TIMEOUT_MS 1600
 
 static const unsigned int tran_exp[] = {
 	10000,		100000,		1000000,	10000000,
@@ -522,8 +523,7 @@
 			card->cid.year += 16;
 
 		/* check whether the eMMC card supports BKOPS */
-		if (!mmc_card_broken_hpi(card) &&
-		    ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
+		if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
 			card->ext_csd.bkops = 1;
 			card->ext_csd.man_bkops_en =
 					(ext_csd[EXT_CSD_BKOPS_EN] &
@@ -1733,20 +1733,26 @@
 		if (err) {
 			pr_warn("%s: Enabling HPI failed\n",
 				mmc_hostname(card->host));
+			card->ext_csd.hpi_en = 0;
 			err = 0;
-		} else
+		} else {
 			card->ext_csd.hpi_en = 1;
+		}
 	}
 
 	/*
-	 * If cache size is higher than 0, this indicates
-	 * the existence of cache and it can be turned on.
+	 * If cache size is higher than 0, this indicates the existence of cache
+	 * and it can be turned on. Note that some eMMCs from Micron has been
+	 * reported to need ~800 ms timeout, while enabling the cache after
+	 * sudden power failure tests. Let's extend the timeout to a minimum of
+	 * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards.
 	 */
-	if (!mmc_card_broken_hpi(card) &&
-	    card->ext_csd.cache_size > 0) {
+	if (card->ext_csd.cache_size > 0) {
+		unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS;
+
+		timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms);
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				EXT_CSD_CACHE_CTRL, 1,
-				card->ext_csd.generic_cmd6_time);
+				EXT_CSD_CACHE_CTRL, 1, timeout_ms);
 		if (err && err != -EBADMSG)
 			goto free_card;
 
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index f7d1c8c..009242b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2105,7 +2105,6 @@
 	mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
 	mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-	mmc->max_seg_size = mmc->max_req_size;
 
 	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 		     MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
@@ -2135,6 +2134,17 @@
 		goto err_irq;
 	}
 
+	/*
+	 * Limit the maximum segment size to the lower of the request size
+	 * and the DMA engine device segment size limits.  In reality, with
+	 * 32-bit transfers, the DMA engine can do longer segments than this
+	 * but there is no way to represent that in the DMA model - if we
+	 * increase this figure here, we get warnings from the DMA API debug.
+	 */
+	mmc->max_seg_size = min3(mmc->max_req_size,
+			dma_get_max_seg_size(host->rx_chan->device->dev),
+			dma_get_max_seg_size(host->tx_chan->device->dev));
+
 	/* Request IRQ for MMC operations */
 	ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0,
 			mmc_hostname(mmc), host);
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index e7b5163..66ae647 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2808,6 +2808,12 @@
 		return -EIO;
 	}
 
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
 	switch (config_data[if_num]) {
 	case 0x0:
 		result = 0;
@@ -2878,10 +2884,18 @@
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
-	if (id->driver_info)
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
 		port_spec = ((u32 *)(id->driver_info))[if_num];
-	else
+	} else {
 		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
 
 	/* Check if we need to switch to alt interfaces prior to port
 	 * configuration */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 00d1066..39e2d32 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1353,7 +1353,8 @@
 		portsc_buf[port_index] = 0;
 
 		/* Bail out if a USB3 port has a new device in link training */
-		if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+		if ((hcd->speed >= HCD_USB3) &&
+		    (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
 			bus_state->bus_suspended = 0;
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2b81939..1e3445d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1163,6 +1163,10 @@
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1900),				/* Telit LN940 (QMI) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),	/* Telit LN940 (MBIM) */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
@@ -1327,6 +1331,7 @@
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) },	/* GosunCn ZTE WeLink ME3630 (MBIM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
@@ -1530,6 +1535,7 @@
 	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
 	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
@@ -1757,6 +1763,7 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
 	  .driver_info = RSVD(5) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
@@ -1941,7 +1948,14 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) },	/* HP lt2523 (Novatel E371) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) },	/* HP lt4132 (Huawei ME906s-158) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 */
+	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 46cd2e1..1999e85 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -466,7 +466,7 @@
 
 	inode = new_inode(sb);
 	if (!inode)
-		goto out;
+		return ERR_PTR(-ENOMEM);
 
 	inode->i_ino = get_next_ino();
 
@@ -476,8 +476,7 @@
 	if (unlikely(head->unregistering)) {
 		spin_unlock(&sysctl_lock);
 		iput(inode);
-		inode = NULL;
-		goto out;
+		return ERR_PTR(-ENOENT);
 	}
 	ei->sysctl = head;
 	ei->sysctl_entry = table;
@@ -502,7 +501,6 @@
 	if (root->set_ownership)
 		root->set_ownership(head, table, &inode->i_uid, &inode->i_gid);
 
-out:
 	return inode;
 }
 
@@ -551,10 +549,11 @@
 			goto out;
 	}
 
-	err = ERR_PTR(-ENOMEM);
 	inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p);
-	if (!inode)
+	if (IS_ERR(inode)) {
+		err = ERR_CAST(inode);
 		goto out;
+	}
 
 	err = NULL;
 	d_set_d_op(dentry, &proc_sys_dentry_operations);
@@ -687,7 +686,7 @@
 			return false;
 		if (d_in_lookup(child)) {
 			inode = proc_sys_make_inode(dir->d_sb, head, table);
-			if (!inode) {
+			if (IS_ERR(inode)) {
 				d_lookup_done(child);
 				dput(child);
 				return false;
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index fb0f44c..de7799a 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -210,6 +210,38 @@
 }
 
 /**
+ * inode_still_linked - check whether inode in question will be re-linked.
+ * @c: UBIFS file-system description object
+ * @rino: replay entry to test
+ *
+ * O_TMPFILE files can be re-linked, this means link count goes from 0 to 1.
+ * This case needs special care, otherwise all references to the inode will
+ * be removed upon the first replay entry of an inode with link count 0
+ * is found.
+ */
+static bool inode_still_linked(struct ubifs_info *c, struct replay_entry *rino)
+{
+	struct replay_entry *r;
+
+	ubifs_assert(rino->deletion);
+	ubifs_assert(key_type(c, &rino->key) == UBIFS_INO_KEY);
+
+	/*
+	 * Find the most recent entry for the inode behind @rino and check
+	 * whether it is a deletion.
+	 */
+	list_for_each_entry_reverse(r, &c->replay_list, list) {
+		ubifs_assert(r->sqnum >= rino->sqnum);
+		if (key_inum(c, &r->key) == key_inum(c, &rino->key))
+			return r->deletion == 0;
+
+	}
+
+	ubifs_assert(0);
+	return false;
+}
+
+/**
  * apply_replay_entry - apply a replay entry to the TNC.
  * @c: UBIFS file-system description object
  * @r: replay entry to apply
@@ -239,6 +271,11 @@
 			{
 				ino_t inum = key_inum(c, &r->key);
 
+				if (inode_still_linked(c, r)) {
+					err = 0;
+					break;
+				}
+
 				err = ubifs_tnc_remove_ino(c, inum);
 				break;
 			}
diff --git a/kernel/panic.c b/kernel/panic.c
index dbec387..eb7bc6d 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -13,6 +13,7 @@
 #include <linux/kmsg_dump.h>
 #include <linux/kallsyms.h>
 #include <linux/notifier.h>
+#include <linux/vt_kern.h>
 #include <linux/module.h>
 #include <linux/random.h>
 #include <linux/ftrace.h>
@@ -228,7 +229,10 @@
 	if (_crash_kexec_post_notifiers)
 		__crash_kexec(NULL);
 
-	bust_spinlocks(0);
+#ifdef CONFIG_VT
+	unblank_screen();
+#endif
+	console_unblank();
 
 	/*
 	 * We may have ended up stopping the CPU holding the lock (in