| /* |
| * Copyright (c) 2009-2011 Wind River Systems, Inc. |
| * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| * See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * The STMicroelectronics ConneXt (STA2X11) chip has several unrelated |
| * functions in one PCI endpoint functions. This driver simply |
| * registers the platform devices in this iomemregion and exports a few |
| * functions to access common registers |
| */ |
| |
| #ifndef __STA2X11_MFD_H |
| #define __STA2X11_MFD_H |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| |
| enum sta2x11_mfd_plat_dev { |
| sta2x11_sctl = 0, |
| sta2x11_gpio, |
| sta2x11_scr, |
| sta2x11_time, |
| sta2x11_apbreg, |
| sta2x11_apb_soc_regs, |
| sta2x11_vic, |
| sta2x11_n_mfd_plat_devs, |
| }; |
| |
| #define STA2X11_MFD_SCTL_NAME "sta2x11-sctl" |
| #define STA2X11_MFD_GPIO_NAME "sta2x11-gpio" |
| #define STA2X11_MFD_SCR_NAME "sta2x11-scr" |
| #define STA2X11_MFD_TIME_NAME "sta2x11-time" |
| #define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg" |
| #define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs" |
| #define STA2X11_MFD_VIC_NAME "sta2x11-vic" |
| |
| extern u32 |
| __sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev); |
| |
| /* |
| * The MFD PCI block includes the GPIO peripherals and other register blocks. |
| * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".) |
| */ |
| #define GSTA_GPIO_PER_BLOCK 32 |
| #define GSTA_NR_BLOCKS 4 |
| #define GSTA_NR_GPIO (GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS) |
| |
| /* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */ |
| struct sta2x11_gpio_pdata { |
| unsigned pinconfig[GSTA_NR_GPIO]; |
| }; |
| |
| /* Macros below lifted from sh_pfc.h, with minor differences */ |
| #define PINMUX_TYPE_NONE 0 |
| #define PINMUX_TYPE_FUNCTION 1 |
| #define PINMUX_TYPE_OUTPUT_LOW 2 |
| #define PINMUX_TYPE_OUTPUT_HIGH 3 |
| #define PINMUX_TYPE_INPUT 4 |
| #define PINMUX_TYPE_INPUT_PULLUP 5 |
| #define PINMUX_TYPE_INPUT_PULLDOWN 6 |
| |
| /* Give names to GPIO pins, like PXA does, taken from the manual */ |
| #define STA2X11_GPIO0 0 |
| #define STA2X11_GPIO1 1 |
| #define STA2X11_GPIO2 2 |
| #define STA2X11_GPIO3 3 |
| #define STA2X11_GPIO4 4 |
| #define STA2X11_GPIO5 5 |
| #define STA2X11_GPIO6 6 |
| #define STA2X11_GPIO7 7 |
| #define STA2X11_GPIO8_RGBOUT_RED7 8 |
| #define STA2X11_GPIO9_RGBOUT_RED6 9 |
| #define STA2X11_GPIO10_RGBOUT_RED5 10 |
| #define STA2X11_GPIO11_RGBOUT_RED4 11 |
| #define STA2X11_GPIO12_RGBOUT_RED3 12 |
| #define STA2X11_GPIO13_RGBOUT_RED2 13 |
| #define STA2X11_GPIO14_RGBOUT_RED1 14 |
| #define STA2X11_GPIO15_RGBOUT_RED0 15 |
| #define STA2X11_GPIO16_RGBOUT_GREEN7 16 |
| #define STA2X11_GPIO17_RGBOUT_GREEN6 17 |
| #define STA2X11_GPIO18_RGBOUT_GREEN5 18 |
| #define STA2X11_GPIO19_RGBOUT_GREEN4 19 |
| #define STA2X11_GPIO20_RGBOUT_GREEN3 20 |
| #define STA2X11_GPIO21_RGBOUT_GREEN2 21 |
| #define STA2X11_GPIO22_RGBOUT_GREEN1 22 |
| #define STA2X11_GPIO23_RGBOUT_GREEN0 23 |
| #define STA2X11_GPIO24_RGBOUT_BLUE7 24 |
| #define STA2X11_GPIO25_RGBOUT_BLUE6 25 |
| #define STA2X11_GPIO26_RGBOUT_BLUE5 26 |
| #define STA2X11_GPIO27_RGBOUT_BLUE4 27 |
| #define STA2X11_GPIO28_RGBOUT_BLUE3 28 |
| #define STA2X11_GPIO29_RGBOUT_BLUE2 29 |
| #define STA2X11_GPIO30_RGBOUT_BLUE1 30 |
| #define STA2X11_GPIO31_RGBOUT_BLUE0 31 |
| #define STA2X11_GPIO32_RGBOUT_VSYNCH 32 |
| #define STA2X11_GPIO33_RGBOUT_HSYNCH 33 |
| #define STA2X11_GPIO34_RGBOUT_DEN 34 |
| #define STA2X11_GPIO35_ETH_CRS_DV 35 |
| #define STA2X11_GPIO36_ETH_TXD1 36 |
| #define STA2X11_GPIO37_ETH_TXD0 37 |
| #define STA2X11_GPIO38_ETH_TX_EN 38 |
| #define STA2X11_GPIO39_MDIO 39 |
| #define STA2X11_GPIO40_ETH_REF_CLK 40 |
| #define STA2X11_GPIO41_ETH_RXD1 41 |
| #define STA2X11_GPIO42_ETH_RXD0 42 |
| #define STA2X11_GPIO43_MDC 43 |
| #define STA2X11_GPIO44_CAN_TX 44 |
| #define STA2X11_GPIO45_CAN_RX 45 |
| #define STA2X11_GPIO46_MLB_DAT 46 |
| #define STA2X11_GPIO47_MLB_SIG 47 |
| #define STA2X11_GPIO48_SPI0_CLK 48 |
| #define STA2X11_GPIO49_SPI0_TXD 49 |
| #define STA2X11_GPIO50_SPI0_RXD 50 |
| #define STA2X11_GPIO51_SPI0_FRM 51 |
| #define STA2X11_GPIO52_SPI1_CLK 52 |
| #define STA2X11_GPIO53_SPI1_TXD 53 |
| #define STA2X11_GPIO54_SPI1_RXD 54 |
| #define STA2X11_GPIO55_SPI1_FRM 55 |
| #define STA2X11_GPIO56_SPI2_CLK 56 |
| #define STA2X11_GPIO57_SPI2_TXD 57 |
| #define STA2X11_GPIO58_SPI2_RXD 58 |
| #define STA2X11_GPIO59_SPI2_FRM 59 |
| #define STA2X11_GPIO60_I2C0_SCL 60 |
| #define STA2X11_GPIO61_I2C0_SDA 61 |
| #define STA2X11_GPIO62_I2C1_SCL 62 |
| #define STA2X11_GPIO63_I2C1_SDA 63 |
| #define STA2X11_GPIO64_I2C2_SCL 64 |
| #define STA2X11_GPIO65_I2C2_SDA 65 |
| #define STA2X11_GPIO66_I2C3_SCL 66 |
| #define STA2X11_GPIO67_I2C3_SDA 67 |
| #define STA2X11_GPIO68_MSP0_RCK 68 |
| #define STA2X11_GPIO69_MSP0_RXD 69 |
| #define STA2X11_GPIO70_MSP0_RFS 70 |
| #define STA2X11_GPIO71_MSP0_TCK 71 |
| #define STA2X11_GPIO72_MSP0_TXD 72 |
| #define STA2X11_GPIO73_MSP0_TFS 73 |
| #define STA2X11_GPIO74_MSP0_SCK 74 |
| #define STA2X11_GPIO75_MSP1_CK 75 |
| #define STA2X11_GPIO76_MSP1_RXD 76 |
| #define STA2X11_GPIO77_MSP1_FS 77 |
| #define STA2X11_GPIO78_MSP1_TXD 78 |
| #define STA2X11_GPIO79_MSP2_CK 79 |
| #define STA2X11_GPIO80_MSP2_RXD 80 |
| #define STA2X11_GPIO81_MSP2_FS 81 |
| #define STA2X11_GPIO82_MSP2_TXD 82 |
| #define STA2X11_GPIO83_MSP3_CK 83 |
| #define STA2X11_GPIO84_MSP3_RXD 84 |
| #define STA2X11_GPIO85_MSP3_FS 85 |
| #define STA2X11_GPIO86_MSP3_TXD 86 |
| #define STA2X11_GPIO87_MSP4_CK 87 |
| #define STA2X11_GPIO88_MSP4_RXD 88 |
| #define STA2X11_GPIO89_MSP4_FS 89 |
| #define STA2X11_GPIO90_MSP4_TXD 90 |
| #define STA2X11_GPIO91_MSP5_CK 91 |
| #define STA2X11_GPIO92_MSP5_RXD 92 |
| #define STA2X11_GPIO93_MSP5_FS 93 |
| #define STA2X11_GPIO94_MSP5_TXD 94 |
| #define STA2X11_GPIO95_SDIO3_DAT3 95 |
| #define STA2X11_GPIO96_SDIO3_DAT2 96 |
| #define STA2X11_GPIO97_SDIO3_DAT1 97 |
| #define STA2X11_GPIO98_SDIO3_DAT0 98 |
| #define STA2X11_GPIO99_SDIO3_CLK 99 |
| #define STA2X11_GPIO100_SDIO3_CMD 100 |
| #define STA2X11_GPIO101 101 |
| #define STA2X11_GPIO102 102 |
| #define STA2X11_GPIO103 103 |
| #define STA2X11_GPIO104 104 |
| #define STA2X11_GPIO105_SDIO2_DAT3 105 |
| #define STA2X11_GPIO106_SDIO2_DAT2 106 |
| #define STA2X11_GPIO107_SDIO2_DAT1 107 |
| #define STA2X11_GPIO108_SDIO2_DAT0 108 |
| #define STA2X11_GPIO109_SDIO2_CLK 109 |
| #define STA2X11_GPIO110_SDIO2_CMD 110 |
| #define STA2X11_GPIO111 111 |
| #define STA2X11_GPIO112 112 |
| #define STA2X11_GPIO113 113 |
| #define STA2X11_GPIO114 114 |
| #define STA2X11_GPIO115_SDIO1_DAT3 115 |
| #define STA2X11_GPIO116_SDIO1_DAT2 116 |
| #define STA2X11_GPIO117_SDIO1_DAT1 117 |
| #define STA2X11_GPIO118_SDIO1_DAT0 118 |
| #define STA2X11_GPIO119_SDIO1_CLK 119 |
| #define STA2X11_GPIO120_SDIO1_CMD 120 |
| #define STA2X11_GPIO121 121 |
| #define STA2X11_GPIO122 122 |
| #define STA2X11_GPIO123 123 |
| #define STA2X11_GPIO124 124 |
| #define STA2X11_GPIO125_UART2_TXD 125 |
| #define STA2X11_GPIO126_UART2_RXD 126 |
| #define STA2X11_GPIO127_UART3_TXD 127 |
| |
| /* |
| * The APB bridge has its own registers, needed by our users as well. |
| * They are accessed with the following read/mask/write function. |
| */ |
| static inline u32 |
| sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) |
| { |
| return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg); |
| } |
| |
| /* CAN and MLB */ |
| #define APBREG_BSR 0x00 /* Bridge Status Reg */ |
| #define APBREG_PAER 0x08 /* Peripherals Address Error Reg */ |
| #define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */ |
| #define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */ |
| #define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */ |
| #define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */ |
| #define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */ |
| |
| #define APBREG_CAN (1 << 1) |
| #define APBREG_MLB (1 << 3) |
| |
| /* SARAC */ |
| #define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */ |
| #define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */ |
| #define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */ |
| #define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */ |
| #define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */ |
| #define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */ |
| #define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */ |
| |
| #define APBREG_SARAC (1 << 2) |
| |
| /* |
| * The system controller has its own registers. Some of these are accessed |
| * by out users as well, using the following read/mask/write/function |
| */ |
| static inline |
| u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) |
| { |
| return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl); |
| } |
| |
| #define SCTL_SCCTL 0x00 /* System controller control register */ |
| #define SCTL_ARMCFG 0x04 /* ARM configuration register */ |
| #define SCTL_SCPLLCTL 0x08 /* PLL control status register */ |
| |
| #define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1) |
| #define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3) |
| #define SCTL_SCPLLCTL_STRB_BYPASS BIT(6) |
| #define SCTL_SCPLLCTL_STRB_INPUT BIT(8) |
| |
| #define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */ |
| |
| #define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff |
| #define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10 |
| #define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7 |
| #define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21 |
| #define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7 |
| #define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18 |
| #define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03 |
| #define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4 |
| |
| |
| #define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */ |
| |
| #define SCTL_SCRESFRACT_MASK 0x0000ffff |
| |
| |
| #define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */ |
| #define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */ |
| #define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */ |
| #define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */ |
| #define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */ |
| #define SCTL_SCGRST 0x28 /* Peripheral global reset */ |
| #define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */ |
| #define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */ |
| #define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */ |
| #define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */ |
| #define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */ |
| #define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */ |
| #define SCTL_SCINTREN 0x44 /* Interrupt enable */ |
| #define SCTL_SCRISR 0x48 /* RAW interrupt status */ |
| #define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */ |
| #define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */ |
| #define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */ |
| #define SCTL_SCRSTSTA 0x58 /* Reset status register */ |
| |
| #define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0) |
| #define SCTL_SCRESCTRL1_USB_OTG (1 << 1) |
| #define SCTL_SCRESCTRL1_USB_HRST (1 << 2) |
| #define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3) |
| #define SCTL_SCRESCTRL1_SATAII (1 << 4) |
| #define SCTL_SCRESCTRL1_VIP (1 << 5) |
| #define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6) |
| #define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7) |
| #define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8) |
| #define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9) |
| #define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10) |
| #define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11) |
| #define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12) |
| #define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13) |
| #define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14) |
| #define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15) |
| #define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16) |
| #define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17) |
| #define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18) |
| #define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19) |
| #define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20) |
| #define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21) |
| #define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22) |
| #define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23) |
| #define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24) |
| #define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25) |
| #define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26) |
| #define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27) |
| #define SCTL_SCRESCTRL1_PER_MMC (1 << 28) |
| #define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29) |
| #define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30) |
| #define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31) |
| |
| #define SCTL_SCPEREN0_UART0 (1 << 0) |
| #define SCTL_SCPEREN0_UART1 (1 << 1) |
| #define SCTL_SCPEREN0_UART2 (1 << 2) |
| #define SCTL_SCPEREN0_UART3 (1 << 3) |
| #define SCTL_SCPEREN0_MSP0 (1 << 4) |
| #define SCTL_SCPEREN0_MSP1 (1 << 5) |
| #define SCTL_SCPEREN0_MSP2 (1 << 6) |
| #define SCTL_SCPEREN0_MSP3 (1 << 7) |
| #define SCTL_SCPEREN0_MSP4 (1 << 8) |
| #define SCTL_SCPEREN0_MSP5 (1 << 9) |
| #define SCTL_SCPEREN0_SPI0 (1 << 10) |
| #define SCTL_SCPEREN0_SPI1 (1 << 11) |
| #define SCTL_SCPEREN0_SPI2 (1 << 12) |
| #define SCTL_SCPEREN0_I2C0 (1 << 13) |
| #define SCTL_SCPEREN0_I2C1 (1 << 14) |
| #define SCTL_SCPEREN0_I2C2 (1 << 15) |
| #define SCTL_SCPEREN0_I2C3 (1 << 16) |
| #define SCTL_SCPEREN0_SVDO_LVDS (1 << 17) |
| #define SCTL_SCPEREN0_USB_HOST (1 << 18) |
| #define SCTL_SCPEREN0_USB_OTG (1 << 19) |
| #define SCTL_SCPEREN0_MCI0 (1 << 20) |
| #define SCTL_SCPEREN0_MCI1 (1 << 21) |
| #define SCTL_SCPEREN0_MCI2 (1 << 22) |
| #define SCTL_SCPEREN0_MCI3 (1 << 23) |
| #define SCTL_SCPEREN0_SATA (1 << 24) |
| #define SCTL_SCPEREN0_ETHERNET (1 << 25) |
| #define SCTL_SCPEREN0_VIC (1 << 26) |
| #define SCTL_SCPEREN0_DMA_AUDIO (1 << 27) |
| #define SCTL_SCPEREN0_DMA_SOC (1 << 28) |
| #define SCTL_SCPEREN0_RAM (1 << 29) |
| #define SCTL_SCPEREN0_VIP (1 << 30) |
| #define SCTL_SCPEREN0_ARM (1 << 31) |
| |
| #define SCTL_SCPEREN1_UART0 (1 << 0) |
| #define SCTL_SCPEREN1_UART1 (1 << 1) |
| #define SCTL_SCPEREN1_UART2 (1 << 2) |
| #define SCTL_SCPEREN1_UART3 (1 << 3) |
| #define SCTL_SCPEREN1_MSP0 (1 << 4) |
| #define SCTL_SCPEREN1_MSP1 (1 << 5) |
| #define SCTL_SCPEREN1_MSP2 (1 << 6) |
| #define SCTL_SCPEREN1_MSP3 (1 << 7) |
| #define SCTL_SCPEREN1_MSP4 (1 << 8) |
| #define SCTL_SCPEREN1_MSP5 (1 << 9) |
| #define SCTL_SCPEREN1_SPI0 (1 << 10) |
| #define SCTL_SCPEREN1_SPI1 (1 << 11) |
| #define SCTL_SCPEREN1_SPI2 (1 << 12) |
| #define SCTL_SCPEREN1_I2C0 (1 << 13) |
| #define SCTL_SCPEREN1_I2C1 (1 << 14) |
| #define SCTL_SCPEREN1_I2C2 (1 << 15) |
| #define SCTL_SCPEREN1_I2C3 (1 << 16) |
| #define SCTL_SCPEREN1_USB_PHY (1 << 17) |
| |
| /* |
| * APB-SOC registers |
| */ |
| static inline |
| u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) |
| { |
| return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs); |
| } |
| |
| #define PCIE_EP1_FUNC3_0_INTR_REG 0x000 |
| #define PCIE_EP1_FUNC7_4_INTR_REG 0x004 |
| #define PCIE_EP2_FUNC3_0_INTR_REG 0x008 |
| #define PCIE_EP2_FUNC7_4_INTR_REG 0x00c |
| #define PCIE_EP3_FUNC3_0_INTR_REG 0x010 |
| #define PCIE_EP3_FUNC7_4_INTR_REG 0x014 |
| #define PCIE_EP4_FUNC3_0_INTR_REG 0x018 |
| #define PCIE_EP4_FUNC7_4_INTR_REG 0x01c |
| #define PCIE_INTR_ENABLE0_REG 0x020 |
| #define PCIE_INTR_ENABLE1_REG 0x024 |
| #define PCIE_EP1_FUNC_TC_REG 0x028 |
| #define PCIE_EP2_FUNC_TC_REG 0x02c |
| #define PCIE_EP3_FUNC_TC_REG 0x030 |
| #define PCIE_EP4_FUNC_TC_REG 0x034 |
| #define PCIE_EP1_FUNC_F_REG 0x038 |
| #define PCIE_EP2_FUNC_F_REG 0x03c |
| #define PCIE_EP3_FUNC_F_REG 0x040 |
| #define PCIE_EP4_FUNC_F_REG 0x044 |
| #define PCIE_PAB_AMBA_SW_RST_REG 0x048 |
| #define PCIE_PM_STATUS_0_PORT_0_4 0x04c |
| #define PCIE_PM_STATUS_7_0_EP1 0x050 |
| #define PCIE_PM_STATUS_7_0_EP2 0x054 |
| #define PCIE_PM_STATUS_7_0_EP3 0x058 |
| #define PCIE_PM_STATUS_7_0_EP4 0x05c |
| #define PCIE_DEV_ID_0_EP1_REG 0x060 |
| #define PCIE_CC_REV_ID_0_EP1_REG 0x064 |
| #define PCIE_DEV_ID_1_EP1_REG 0x068 |
| #define PCIE_CC_REV_ID_1_EP1_REG 0x06c |
| #define PCIE_DEV_ID_2_EP1_REG 0x070 |
| #define PCIE_CC_REV_ID_2_EP1_REG 0x074 |
| #define PCIE_DEV_ID_3_EP1_REG 0x078 |
| #define PCIE_CC_REV_ID_3_EP1_REG 0x07c |
| #define PCIE_DEV_ID_4_EP1_REG 0x080 |
| #define PCIE_CC_REV_ID_4_EP1_REG 0x084 |
| #define PCIE_DEV_ID_5_EP1_REG 0x088 |
| #define PCIE_CC_REV_ID_5_EP1_REG 0x08c |
| #define PCIE_DEV_ID_6_EP1_REG 0x090 |
| #define PCIE_CC_REV_ID_6_EP1_REG 0x094 |
| #define PCIE_DEV_ID_7_EP1_REG 0x098 |
| #define PCIE_CC_REV_ID_7_EP1_REG 0x09c |
| #define PCIE_DEV_ID_0_EP2_REG 0x0a0 |
| #define PCIE_CC_REV_ID_0_EP2_REG 0x0a4 |
| #define PCIE_DEV_ID_1_EP2_REG 0x0a8 |
| #define PCIE_CC_REV_ID_1_EP2_REG 0x0ac |
| #define PCIE_DEV_ID_2_EP2_REG 0x0b0 |
| #define PCIE_CC_REV_ID_2_EP2_REG 0x0b4 |
| #define PCIE_DEV_ID_3_EP2_REG 0x0b8 |
| #define PCIE_CC_REV_ID_3_EP2_REG 0x0bc |
| #define PCIE_DEV_ID_4_EP2_REG 0x0c0 |
| #define PCIE_CC_REV_ID_4_EP2_REG 0x0c4 |
| #define PCIE_DEV_ID_5_EP2_REG 0x0c8 |
| #define PCIE_CC_REV_ID_5_EP2_REG 0x0cc |
| #define PCIE_DEV_ID_6_EP2_REG 0x0d0 |
| #define PCIE_CC_REV_ID_6_EP2_REG 0x0d4 |
| #define PCIE_DEV_ID_7_EP2_REG 0x0d8 |
| #define PCIE_CC_REV_ID_7_EP2_REG 0x0dC |
| #define PCIE_DEV_ID_0_EP3_REG 0x0e0 |
| #define PCIE_CC_REV_ID_0_EP3_REG 0x0e4 |
| #define PCIE_DEV_ID_1_EP3_REG 0x0e8 |
| #define PCIE_CC_REV_ID_1_EP3_REG 0x0ec |
| #define PCIE_DEV_ID_2_EP3_REG 0x0f0 |
| #define PCIE_CC_REV_ID_2_EP3_REG 0x0f4 |
| #define PCIE_DEV_ID_3_EP3_REG 0x0f8 |
| #define PCIE_CC_REV_ID_3_EP3_REG 0x0fc |
| #define PCIE_DEV_ID_4_EP3_REG 0x100 |
| #define PCIE_CC_REV_ID_4_EP3_REG 0x104 |
| #define PCIE_DEV_ID_5_EP3_REG 0x108 |
| #define PCIE_CC_REV_ID_5_EP3_REG 0x10c |
| #define PCIE_DEV_ID_6_EP3_REG 0x110 |
| #define PCIE_CC_REV_ID_6_EP3_REG 0x114 |
| #define PCIE_DEV_ID_7_EP3_REG 0x118 |
| #define PCIE_CC_REV_ID_7_EP3_REG 0x11c |
| #define PCIE_DEV_ID_0_EP4_REG 0x120 |
| #define PCIE_CC_REV_ID_0_EP4_REG 0x124 |
| #define PCIE_DEV_ID_1_EP4_REG 0x128 |
| #define PCIE_CC_REV_ID_1_EP4_REG 0x12c |
| #define PCIE_DEV_ID_2_EP4_REG 0x130 |
| #define PCIE_CC_REV_ID_2_EP4_REG 0x134 |
| #define PCIE_DEV_ID_3_EP4_REG 0x138 |
| #define PCIE_CC_REV_ID_3_EP4_REG 0x13c |
| #define PCIE_DEV_ID_4_EP4_REG 0x140 |
| #define PCIE_CC_REV_ID_4_EP4_REG 0x144 |
| #define PCIE_DEV_ID_5_EP4_REG 0x148 |
| #define PCIE_CC_REV_ID_5_EP4_REG 0x14c |
| #define PCIE_DEV_ID_6_EP4_REG 0x150 |
| #define PCIE_CC_REV_ID_6_EP4_REG 0x154 |
| #define PCIE_DEV_ID_7_EP4_REG 0x158 |
| #define PCIE_CC_REV_ID_7_EP4_REG 0x15c |
| #define PCIE_SUBSYS_VEN_ID_REG 0x160 |
| #define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164 |
| #define PCIE_MIPHYP_SSC_EN_REG 0x168 |
| #define PCIE_MIPHYP_ADDR_REG 0x16c |
| #define PCIE_L1_ASPM_READY_REG 0x170 |
| #define PCIE_EXT_CFG_RDY_REG 0x174 |
| #define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178 |
| #define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c |
| #define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180 |
| #define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184 |
| #define DMA_IP_CTRL_REG 0x324 |
| #define DISP_BRIDGE_PU_PD_CTRL_REG 0x328 |
| #define VIP_PU_PD_CTRL_REG 0x32c |
| #define USB_MLB_PU_PD_CTRL_REG 0x330 |
| #define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334 |
| #define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338 |
| #define UART_PU_PD_CTRL_REG 0x33c |
| #define ARM_Lock 0x340 |
| #define SYS_IO_CHAR_REG1 0x344 |
| #define SYS_IO_CHAR_REG2 0x348 |
| #define SATA_CORE_ID_REG 0x34c |
| #define SATA_CTRL_REG 0x350 |
| #define I2C_HSFIX_MISC_REG 0x354 |
| #define SPARE2_RESERVED 0x358 |
| #define SPARE3_RESERVED 0x35c |
| #define MASTER_LOCK_REG 0x368 |
| #define SYSTEM_CONFIG_STATUS_REG 0x36c |
| #define MSP_CLK_CTRL_REG 0x39c |
| #define COMPENSATION_REG1 0x3c4 |
| #define COMPENSATION_REG2 0x3c8 |
| #define COMPENSATION_REG3 0x3cc |
| #define TEST_CTL_REG 0x3d0 |
| |
| /* |
| * SECR (OTP) registers |
| */ |
| #define STA2X11_SECR_CR 0x00 |
| #define STA2X11_SECR_FVR0 0x10 |
| #define STA2X11_SECR_FVR1 0x14 |
| |
| extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev, |
| enum sta2x11_mfd_plat_dev index, |
| void __iomem **regs, |
| spinlock_t **lock); |
| |
| #endif /* __STA2X11_MFD_H */ |
