#
# Misc strange devices
#

menu "Misc devices"

config SENSORS_LIS3LV02D
	tristate
	depends on INPUT
	select INPUT_POLLDEV
	default n

config AD525X_DPOT
	tristate "Analog Devices Digital Potentiometers"
	depends on (I2C || SPI) && SYSFS
	help
	  If you say yes here, you get support for the Analog Devices
	  AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
	  AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
	  AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
	  AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
	  AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
	  AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
	  ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
	  AD5271, AD5272, AD5274
	  digital potentiometer chips.

	  See Documentation/misc-devices/ad525x_dpot.txt for the
	  userspace interface.

	  This driver can also be built as a module.  If so, the module
	  will be called ad525x_dpot.

config AD525X_DPOT_I2C
	tristate "support I2C bus connection"
	depends on AD525X_DPOT && I2C
	help
	  Say Y here if you have a digital potentiometers hooked to an I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called ad525x_dpot-i2c.

config AD525X_DPOT_SPI
	tristate "support SPI bus connection"
	depends on AD525X_DPOT && SPI_MASTER
	help
	  Say Y here if you have a digital potentiometers hooked to an SPI bus.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad525x_dpot-spi.

config ATMEL_PWM
	tristate "Atmel AT32/AT91 PWM support"
	depends on HAVE_CLK
	help
	  This option enables device driver support for the PWM channels
	  on certain Atmel processors.  Pulse Width Modulation is used for
	  purposes including software controlled power-efficient backlights
	  on LCD displays, motor control, and waveform generation.

config AB8500_PWM
	bool "AB8500 PWM support"
	depends on AB8500_CORE && ARCH_U8500
	select HAVE_PWM
	help
	  This driver exports functions to enable/disble/config/free Pulse
	  Width Modulation in the Analog Baseband Chip AB8500.
	  It is used by led and backlight driver to control the intensity.

config ATMEL_TCLIB
	bool "Atmel AT32/AT91 Timer/Counter Library"
	depends on (AVR32 || ARCH_AT91)
	help
	  Select this if you want a library to allocate the Timer/Counter
	  blocks found on many Atmel processors.  This facilitates using
	  these blocks by different drivers despite processor differences.

config ATMEL_TCB_CLKSRC
	bool "TC Block Clocksource"
	depends on ATMEL_TCLIB
	default y
	help
	  Select this to get a high precision clocksource based on a
	  TC block with a 5+ MHz base clock rate.  Two timer channels
	  are combined to make a single 32-bit timer.

	  When GENERIC_CLOCKEVENTS is defined, the third timer channel
	  may be used as a clock event device supporting oneshot mode
	  (delays of up to two seconds) based on the 32 KiHz clock.

config ATMEL_TCB_CLKSRC_BLOCK
	int
	depends on ATMEL_TCB_CLKSRC
	prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
	default 0
	range 0 1
	help
	  Some chips provide more than one TC block, so you have the
	  choice of which one to use for the clock framework.  The other
	  TC can be used for other purposes, such as PWM generation and
	  interval timing.

config IBM_ASM
	tristate "Device driver for IBM RSA service processor"
	depends on X86 && PCI && INPUT && EXPERIMENTAL
	---help---
	  This option enables device driver support for in-band access to the
	  IBM RSA (Condor) service processor in eServer xSeries systems.
	  The ibmasm device driver allows user space application to access
	  ASM (Advanced Systems Management) functions on the service
	  processor. The driver is meant to be used in conjunction with
	  a user space API.
	  The ibmasm driver also enables the OS to use the UART on the
	  service processor board as a regular serial port. To make use of
	  this feature serial driver support (CONFIG_SERIAL_8250) must be
	  enabled.

	  WARNING: This software may not be supported or function
	  correctly on your IBM server. Please consult the IBM ServerProven
	  website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
	  for information on the specific driver level and support statement
	  for your IBM server.

config PHANTOM
	tristate "Sensable PHANToM (PCI)"
	depends on PCI
	help
	  Say Y here if you want to build a driver for Sensable PHANToM device.

	  This driver is only for PCI PHANToMs.

	  If you choose to build module, its name will be phantom. If unsure,
	  say N here.

config INTEL_MID_PTI
	tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
	depends on PCI
	default n
	help
	  The PTI (Parallel Trace Interface) driver directs
	  trace data routed from various parts in the system out
	  through an Intel Penwell PTI port and out of the mobile
	  device for analysis with a debugging tool (Lauterbach or Fido).

	  You should select this driver if the target kernel is meant for
	  an Intel Atom (non-netbook) mobile device containing a MIPI
	  P1149.7 standard implementation.

config SGI_IOC4
	tristate "SGI IOC4 Base IO support"
	depends on PCI
	---help---
	  This option enables basic support for the IOC4 chip on certain
	  SGI IO controller cards (IO9, IO10, and PCI-RT).  This option
	  does not enable any specific functions on such a card, but provides
	  necessary infrastructure for other drivers to utilize.

	  If you have an SGI Altix with an IOC4-based card say Y.
	  Otherwise say N.

config TIFM_CORE
	tristate "TI Flash Media interface support (EXPERIMENTAL)"
	depends on EXPERIMENTAL && PCI
	help
	  If you want support for Texas Instruments(R) Flash Media adapters
	  you should select this option and then also choose an appropriate
	  host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
	  support', if you have a TI PCI74xx compatible card reader, for
	  example.
	  You will also have to select some flash card format drivers. MMC/SD
	  cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
	  Interface support (MMC_TIFM_SD)'.

	  To compile this driver as a module, choose M here: the module will
	  be called tifm_core.

config TIFM_7XX1
	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
	depends on PCI && TIFM_CORE && EXPERIMENTAL
	default TIFM_CORE
	help
	  This option enables support for Texas Instruments(R) PCI74xx and
	  PCI76xx families of Flash Media adapters, found in many laptops.
	  To make actual use of the device, you will have to select some
	  flash card format drivers, as outlined in the TIFM_CORE Help.

	  To compile this driver as a module, choose M here: the module will
	  be called tifm_7xx1.

config ICS932S401
	tristate "Integrated Circuits ICS932S401"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Integrated Circuits
	  ICS932S401 clock control chips.

	  This driver can also be built as a module. If so, the module
	  will be called ics932s401.

config ATMEL_SSC
	tristate "Device driver for Atmel SSC peripheral"
	depends on AVR32 || ARCH_AT91
	---help---
	  This option enables device driver support for Atmel Synchronized
	  Serial Communication peripheral (SSC).

	  The SSC peripheral supports a wide variety of serial frame based
	  communications, i.e. I2S, SPI, etc.

	  If unsure, say N.

config ENCLOSURE_SERVICES
	tristate "Enclosure Services"
	default n
	help
	  Provides support for intelligent enclosures (bays which
	  contain storage devices).  You also need either a host
	  driver (SCSI/ATA) which supports enclosures
	  or a SCSI enclosure device (SES) to use these services.

config SGI_XP
	tristate "Support communication between SGI SSIs"
	depends on NET
	depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
	select SGI_GRU if X86_64 && SMP
	---help---
	  An SGI machine can be divided into multiple Single System
	  Images which act independently of each other and have
	  hardware based memory protection from the others.  Enabling
	  this feature will allow for direct communication between SSIs
	  based on a network adapter and DMA messaging.

config CS5535_MFGPT
	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
	depends on PCI && X86 && MFD_CS5535
	default n
	help
	  This driver provides access to MFGPT functionality for other
	  drivers that need timers.  MFGPTs are available in the CS5535 and
	  CS5536 companion chips that are found in AMD Geode and several
	  other platforms.  They have a better resolution and max interval
	  than the generic PIT, and are suitable for use as high-res timers.
	  You probably don't want to enable this manually; other drivers that
	  make use of it should enable it.

config CS5535_MFGPT_DEFAULT_IRQ
	int
	depends on CS5535_MFGPT
	default 7
	help
	  MFGPTs on the CS5535 require an interrupt.  The selected IRQ
	  can be overridden as a module option as well as by driver that
	  use the cs5535_mfgpt_ API; however, different architectures might
	  want to use a different IRQ by default.  This is here for
	  architectures to set as necessary.

config CS5535_CLOCK_EVENT_SRC
	tristate "CS5535/CS5536 high-res timer (MFGPT) events"
	depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
	help
	  This driver provides a clock event source based on the MFGPT
	  timer(s) in the CS5535 and CS5536 companion chips.
	  MFGPTs have a better resolution and max interval than the
	  generic PIT, and are suitable for use as high-res timers.

config HP_ILO
	tristate "Channel interface driver for the HP iLO processor"
	depends on PCI
	default n
	help
	  The channel interface driver allows applications to communicate
	  with iLO management processors present on HP ProLiant servers.
	  Upon loading, the driver creates /dev/hpilo/dXccbN files, which
	  can be used to gather data from the management processor, via
	  read and write system calls.

	  To compile this driver as a module, choose M here: the
	  module will be called hpilo.

config SGI_GRU
	tristate "SGI GRU driver"
	depends on X86_UV && SMP
	default n
	select MMU_NOTIFIER
	---help---
	The GRU is a hardware resource located in the system chipset. The GRU
	contains memory that can be mmapped into the user address space. This memory is
	used to communicate with the GRU to perform functions such as load/store,
	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
	user virtual addresses for operands.

	If you are not running on a SGI UV system, say N.

config SGI_GRU_DEBUG
	bool  "SGI GRU driver debug"
	depends on SGI_GRU
	default n
	---help---
	This option enables addition debugging code for the SGI GRU driver. If
	you are unsure, say N.

config APDS9802ALS
	tristate "Medfield Avago APDS9802 ALS Sensor module"
	depends on I2C
	help
	  If you say yes here you get support for the ALS APDS9802 ambient
	  light sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called apds9802als.

config ISL29003
	tristate "Intersil ISL29003 ambient light sensor"
	depends on I2C && SYSFS
	help
	  If you say yes here you get support for the Intersil ISL29003
	  ambient light sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called isl29003.

config ISL29020
	tristate "Intersil ISL29020 ambient light sensor"
	depends on I2C
	help
	  If you say yes here you get support for the Intersil ISL29020
	  ambient light sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called isl29020.

config SENSORS_TSL2550
	tristate "Taos TSL2550 ambient light sensor"
	depends on I2C && SYSFS
	help
	  If you say yes here you get support for the Taos TSL2550
	  ambient light sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called tsl2550.

config SENSORS_BH1780
	tristate "ROHM BH1780GLI ambient light sensor"
	depends on I2C && SYSFS
	help
	  If you say yes here you get support for the ROHM BH1780GLI
	  ambient light sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called bh1780gli.

config SENSORS_BH1770
         tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
         depends on I2C
         ---help---
           Say Y here if you want to build a driver for BH1770GLC (ROHM) or
	   SFH7770 (Osram) combined ambient light and proximity sensor chip.

           To compile this driver as a module, choose M here: the
           module will be called bh1770glc. If unsure, say N here.

config SENSORS_APDS990X
	 tristate "APDS990X combined als and proximity sensors"
	 depends on I2C
	 default n
	 ---help---
	   Say Y here if you want to build a driver for Avago APDS990x
	   combined ambient light and proximity sensor chip.

	   To compile this driver as a module, choose M here: the
	   module will be called apds990x. If unsure, say N here.

config HMC6352
	tristate "Honeywell HMC6352 compass"
	depends on I2C
	help
	  This driver provides support for the Honeywell HMC6352 compass,
	  providing configuration and heading data via sysfs.

config SENSORS_AK8975
	tristate "AK8975 compass support"
	default n
	depends on I2C
	help
	  If you say yes here you get support for Asahi Kasei's
	  orientation sensor AK8975.

config EP93XX_PWM
	tristate "EP93xx PWM support"
	depends on ARCH_EP93XX
	help
	  This option enables device driver support for the PWM channels
	  on the Cirrus EP93xx processors.  The EP9307 chip only has one
	  PWM channel all the others have two, the second channel is an
	  alternate function of the EGPIO14 pin.  A sysfs interface is
	  provided to control the PWM channels.

	  To compile this driver as a module, choose M here: the module will
	  be called ep93xx_pwm.

config DS1682
	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1682 Total Elapsed Time Recorder.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1682.

config SPEAR13XX_PCIE_GADGET
	bool "PCIe gadget support for SPEAr13XX platform"
	depends on ARCH_SPEAR13XX
	default n
	help
	 This option enables gadget support for PCIe controller. If
	 board file defines any controller as PCIe endpoint then a sysfs
	 entry will be created for that controller. User can use these
	 sysfs node to configure PCIe EP as per his requirements.

config TI_DAC7512
	tristate "Texas Instruments DAC7512"
	depends on SPI && SYSFS
	help
	  If you say yes here you get support for the Texas Instruments
	  DAC7512 16-bit digital-to-analog converter.

	  This driver can also be built as a module. If so, the module
	  will be called ti_dac7512.

config UID_STAT
	bool "UID based statistics tracking exported to /proc/uid_stat"
	default n

config VMWARE_BALLOON
	tristate "VMware Balloon Driver"
	depends on X86
	help
	  This is VMware physical memory management driver which acts
	  like a "balloon" that can be inflated to reclaim physical pages
	  by reserving them in the guest and invalidating them in the
	  monitor, freeing up the underlying machine pages so they can
	  be allocated to other guests. The balloon can also be deflated
	  to allow the guest to use more physical memory.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called vmw_balloon.

config ARM_CHARLCD
	bool "ARM Ltd. Character LCD Driver"
	depends on PLAT_VERSATILE
	help
	  This is a driver for the character LCD found on the ARM Ltd.
	  Versatile and RealView Platform Baseboards. It doesn't do
	  very much more than display the text "ARM Linux" on the first
	  line and the Linux version on the second line, but that's
	  still useful.

config BMP085
	tristate "BMP085 digital pressure sensor"
	depends on I2C && SYSFS
	help
	  If you say yes here you get support for the Bosch Sensortec
	  BMP085 digital pressure sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called bmp085.

config PCH_PHUB
	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
	depends on PCI
	help
	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
	  Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
	  processor. The Topcliff has MAC address and Option ROM data in SROM.
	  This driver can access MAC address and Option ROM data in SROM.

	  This driver also can be used for LAPIS Semiconductor's IOH,
	  ML7213/ML7223/ML7831.
	  ML7213 which is for IVI(In-Vehicle Infotainment) use.
	  ML7223 IOH is for MP(Media Phone) use.
	  ML7831 IOH is for general purpose use.
	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.

	  To compile this driver as a module, choose M here: the module will
	  be called pch_phub.

config USB_SWITCH_FSA9480
	tristate "FSA9480 USB Switch"
	depends on I2C
	help
	  The FSA9480 is a USB port accessory detector and switch.
	  The FSA9480 is fully controlled using I2C and enables USB data,
	  stereo and mono audio, video, microphone and UART data to use
	  a common connector port.

config MAX8997_MUIC
	tristate "MAX8997 MUIC Support"
	depends on MFD_MAX8997
	help
	  If you say yes here you get support for the MUIC device of
	  Maxim MAX8997 PMIC.
	  The MAX8997 MUIC is a USB port accessory detector and switch.

config WL127X_RFKILL
	tristate "Bluetooth power control driver for TI wl127x"
	depends on RFKILL
	default n
	---help---
	 Creates an rfkill entry in sysfs for power control of Bluetooth
	 TI wl127x chips.
	 
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
source "drivers/misc/iwmc3200top/Kconfig"
source "drivers/misc/ti-st/Kconfig"
source "drivers/misc/lis3lv02d/Kconfig"
source "drivers/misc/carma/Kconfig"
source "drivers/misc/altera-stapl/Kconfig"
endmenu