blob: 5f547c161bafd23a3054b6c084599955d753314b [file] [log] [blame]
/*
* Copyright 2017 Chen-Yu Tsai <wens@csie.org>
* Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: osc24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
};
};
de: display-engine {
compatible = "allwinner,sun8i-r40-display-engine";
allwinner,pipelines = <&mixer0>, <&mixer1>;
status = "disabled";
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-r40-de2-clk",
"allwinner,sun8i-h3-de2-clk";
reg = <0x01000000 0x100000>;
clocks = <&ccu CLK_DE>,
<&ccu CLK_BUS_DE>;
clock-names = "mod",
"bus";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
mixer0: mixer@1100000 {
compatible = "allwinner,sun8i-r40-de2-mixer-0";
reg = <0x01100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
reg = <1>;
mixer0_out_tcon_top: endpoint {
remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
};
};
};
};
mixer1: mixer@1200000 {
compatible = "allwinner,sun8i-r40-de2-mixer-1";
reg = <0x01200000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER1>,
<&display_clocks CLK_MIXER1>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_WB>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer1_out: port@1 {
reg = <1>;
mixer1_out_tcon_top: endpoint {
remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
};
};
};
};
nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01c00030 0x0c>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
pinctrl-0 = <&mmc0_pins>;
pinctrl-names = "default";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@1c10000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@1c11000 {
compatible = "allwinner,sun8i-r40-emmc",
"allwinner,sun50i-a64-emmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
pinctrl-0 = <&mmc2_pins>;
pinctrl-names = "default";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc3: mmc@1c12000 {
compatible = "allwinner,sun8i-r40-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC3>;
reset-names = "ahb";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usbphy: phy@1c13400 {
compatible = "allwinner,sun8i-r40-usb-phy";
reg = <0x01c13400 0x14>,
<0x01c14800 0x4>,
<0x01c19800 0x4>,
<0x01c1c800 0x4>;
reg-names = "phy_ctrl",
"pmu0",
"pmu1",
"pmu2";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>,
<&ccu CLK_USB_PHY2>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_PHY2>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci1: usb@1c19000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c19000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI1>;
resets = <&ccu RST_BUS_EHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@1c19400 {
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
reg = <0x01c19400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI1>,
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ehci2: usb@1c1c000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_EHCI2>;
resets = <&ccu RST_BUS_EHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ohci2: usb@1c1c400 {
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI2>,
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-r40-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
"PA8", "PA10", "PA11", "PA12",
"PA13", "PA15", "PA16";
function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
drive-strength = <40>;
};
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
mmc1_pg_pins: mmc1-pg-pins {
pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
bias-pull-up;
};
mmc2_pins: mmc2-pins {
pins = "PC5", "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12", "PC13", "PC14",
"PC15", "PC24";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
};
wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART4>;
resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART5>;
resets = <&ccu RST_BUS_UART5>;
status = "disabled";
};
uart6: serial@1c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART6>;
resets = <&ccu RST_BUS_UART6>;
status = "disabled";
};
uart7: serial@1c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART7>;
resets = <&ccu RST_BUS_UART7>;
status = "disabled";
};
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c3: i2c@1c2b800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c4: i2c@1c2c000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
resets = <&ccu RST_BUS_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_GMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_GMAC>;
clock-names = "stmmaceth";
status = "disabled";
gmac_mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
tcon_top: tcon-top@1c70000 {
compatible = "allwinner,sun8i-r40-tcon-top";
reg = <0x01c70000 0x1000>;
clocks = <&ccu CLK_BUS_TCON_TOP>,
<&ccu CLK_TCON_TV0>,
<&ccu CLK_TVE0>,
<&ccu CLK_TCON_TV1>,
<&ccu CLK_TVE1>,
<&ccu CLK_DSI_DPHY>;
clock-names = "bus",
"tcon-tv0",
"tve0",
"tcon-tv1",
"tve1",
"dsi";
clock-output-names = "tcon-top-tv0",
"tcon-top-tv1",
"tcon-top-dsi";
resets = <&ccu RST_BUS_TCON_TOP>;
#clock-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_top_mixer0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon_top_mixer0_in_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&mixer0_out_tcon_top>;
};
};
tcon_top_mixer0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
reg = <0>;
};
tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
reg = <1>;
};
tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
reg = <2>;
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
};
tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
reg = <3>;
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
};
};
tcon_top_mixer1_in: port@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
tcon_top_mixer1_in_mixer1: endpoint@1 {
reg = <1>;
remote-endpoint = <&mixer1_out_tcon_top>;
};
};
tcon_top_mixer1_out: port@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
reg = <0>;
};
tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
reg = <1>;
};
tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
reg = <2>;
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
};
tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
reg = <3>;
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
};
};
tcon_top_hdmi_in: port@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_tv0_out_tcon_top>;
};
tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_tv1_out_tcon_top>;
};
};
tcon_top_hdmi_out: port@5 {
reg = <5>;
tcon_top_hdmi_out_hdmi: endpoint {
remote-endpoint = <&hdmi_in_tcon_top>;
};
};
};
};
tcon_tv0: lcd-controller@1c73000 {
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c73000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV0>;
reset-names = "lcd";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_tv0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
};
tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
};
};
tcon_tv0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_tv0_out_tcon_top: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
};
};
};
};
tcon_tv1: lcd-controller@1c74000 {
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c74000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV1>;
reset-names = "lcd";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_tv1_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
};
tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
};
};
tcon_tv1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_tv1_out_tcon_top: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
};
};
};
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-r40-dw-hdmi",
"allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
hdmi_in_tcon_top: endpoint {
remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
<&ccu 7>, <&ccu 16>;
clock-names = "bus", "mod", "pll-0", "pll-1";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
#phy-cells = <0>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};