blob: d29b6e4e5e721f1509417a0eef829dcaf58dd80b [file] [log] [blame]
/*
* arch/powerpc/oprofile/op_model_7450.c
*
* Freescale 745x/744x oprofile support, based on fsl_booke support
* Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
*
* Copyright (c) 2004 Freescale Semiconductor, Inc
*
* Author: Andy Fleming
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/oprofile.h>
#include <linux/smp.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/page.h>
#include <asm/pmc.h>
#include <asm/oprofile_impl.h>
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
static u32 mmcr0_val, mmcr1_val, mmcr2_val, num_pmcs;
#define MMCR0_PMC1_SHIFT 6
#define MMCR0_PMC2_SHIFT 0
#define MMCR1_PMC3_SHIFT 27
#define MMCR1_PMC4_SHIFT 22
#define MMCR1_PMC5_SHIFT 17
#define MMCR1_PMC6_SHIFT 11
#define mmcr0_event1(event) \
((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL)
#define mmcr0_event2(event) \
((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL)
#define mmcr1_event3(event) \
((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL)
#define mmcr1_event4(event) \
((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL)
#define mmcr1_event5(event) \
((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL)
#define mmcr1_event6(event) \
((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL)
#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0)
/* Unfreezes the counters on this CPU, enables the interrupt,
* enables the counters to trigger the interrupt, and sets the
* counters to only count when the mark bit is not set.
*/
static void pmc_start_ctrs(void)
{
u32 mmcr0 = mfspr(SPRN_MMCR0);
mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0);
mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
mtspr(SPRN_MMCR0, mmcr0);
}
/* Disables the counters on this CPU, and freezes them */
static void pmc_stop_ctrs(void)
{
u32 mmcr0 = mfspr(SPRN_MMCR0);
mmcr0 |= MMCR0_FC;
mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
mtspr(SPRN_MMCR0, mmcr0);
}
/* Configures the counters on this CPU based on the global
* settings */
static int fsl7450_cpu_setup(struct op_counter_config *ctr)
{
/* freeze all counters */
pmc_stop_ctrs();
mtspr(SPRN_MMCR0, mmcr0_val);
mtspr(SPRN_MMCR1, mmcr1_val);
if (num_pmcs > 4)
mtspr(SPRN_MMCR2, mmcr2_val);
return 0;
}
/* Configures the global settings for the countes on all CPUs. */
static int fsl7450_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
int num_ctrs)
{
int i;
num_pmcs = num_ctrs;
/* Our counters count up, and "count" refers to
* how much before the next interrupt, and we interrupt
* on overflow. So we calculate the starting value
* which will give us "count" until overflow.
* Then we set the events on the enabled counters */
for (i = 0; i < num_ctrs; ++i)
reset_value[i] = 0x80000000UL - ctr[i].count;
/* Set events for Counters 1 & 2 */
mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event)
| mmcr0_event2(ctr[1].event);
/* Setup user/kernel bits */
if (sys->enable_kernel)
mmcr0_val &= ~(MMCR0_FCS);
if (sys->enable_user)
mmcr0_val &= ~(MMCR0_FCP);
/* Set events for Counters 3-6 */
mmcr1_val = mmcr1_event3(ctr[2].event)
| mmcr1_event4(ctr[3].event);
if (num_ctrs > 4)
mmcr1_val |= mmcr1_event5(ctr[4].event)
| mmcr1_event6(ctr[5].event);
mmcr2_val = 0;
return 0;
}
/* Sets the counters on this CPU to the chosen values, and starts them */
static int fsl7450_start(struct op_counter_config *ctr)
{
int i;
mtmsr(mfmsr() | MSR_PMM);
for (i = 0; i < num_pmcs; ++i) {
if (ctr[i].enabled)
classic_ctr_write(i, reset_value[i]);
else
classic_ctr_write(i, 0);
}
/* Clear the freeze bit, and enable the interrupt.
* The counters won't actually start until the rfi clears
* the PMM bit */
pmc_start_ctrs();
oprofile_running = 1;
return 0;
}
/* Stop the counters on this CPU */
static void fsl7450_stop(void)
{
/* freeze counters */
pmc_stop_ctrs();
oprofile_running = 0;
mb();
}
/* Handle the interrupt on this CPU, and log a sample for each
* event that triggered the interrupt */
static void fsl7450_handle_interrupt(struct pt_regs *regs,
struct op_counter_config *ctr)
{
unsigned long pc;
int is_kernel;
int val;
int i;
/* set the PMM bit (see comment below) */
mtmsr(mfmsr() | MSR_PMM);
pc = mfspr(SPRN_SIAR);
is_kernel = is_kernel_addr(pc);
for (i = 0; i < num_pmcs; ++i) {
val = classic_ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
oprofile_add_ext_sample(pc, regs, i, is_kernel);
classic_ctr_write(i, reset_value[i]);
} else {
classic_ctr_write(i, 0);
}
}
}
/* The freeze bit was set by the interrupt. */
/* Clear the freeze bit, and reenable the interrupt.
* The counters won't actually start until the rfi clears
* the PM/M bit */
pmc_start_ctrs();
}
struct op_powerpc_model op_model_7450= {
.reg_setup = fsl7450_reg_setup,
.cpu_setup = fsl7450_cpu_setup,
.start = fsl7450_start,
.stop = fsl7450_stop,
.handle_interrupt = fsl7450_handle_interrupt,
};