| /* |
| * Copyright 2013-2014 Freescale Semiconductor, Inc. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "skeleton64.dtsi" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "fsl,ls1021a"; |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| crypto = &crypto; |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| serial0 = &lpuart0; |
| serial1 = &lpuart1; |
| serial2 = &lpuart2; |
| serial3 = &lpuart3; |
| serial4 = &lpuart4; |
| serial5 = &lpuart5; |
| sysclk = &sysclk; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@f00 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0xf00>; |
| clocks = <&cluster1_clk>; |
| }; |
| |
| cpu@f01 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0xf01>; |
| clocks = <&cluster1_clk>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| device_type = "soc"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| gic: interrupt-controller@1400000 { |
| compatible = "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x1401000 0x0 0x1000>, |
| <0x0 0x1402000 0x0 0x1000>, |
| <0x0 0x1404000 0x0 0x2000>, |
| <0x0 0x1406000 0x0 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| |
| }; |
| |
| msi1: msi-controller@1570e00 { |
| compatible = "fsl,1s1021a-msi"; |
| reg = <0x0 0x1570e00 0x0 0x8>; |
| msi-controller; |
| interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| msi2: msi-controller@1570e08 { |
| compatible = "fsl,1s1021a-msi"; |
| reg = <0x0 0x1570e08 0x0 0x8>; |
| msi-controller; |
| interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ifc: ifc@1530000 { |
| compatible = "fsl,ifc", "simple-bus"; |
| reg = <0x0 0x1530000 0x0 0x10000>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| dcfg: dcfg@1ee0000 { |
| compatible = "fsl,ls1021a-dcfg", "syscon"; |
| reg = <0x0 0x1ee0000 0x0 0x10000>; |
| big-endian; |
| }; |
| |
| esdhc: esdhc@1560000 { |
| compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; |
| reg = <0x0 0x1560000 0x0 0x10000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| big-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| sata: sata@3200000 { |
| compatible = "fsl,ls1021a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000>, |
| <0x0 0x20220520 0x0 0x4>; |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| scfg: scfg@1570000 { |
| compatible = "fsl,ls1021a-scfg", "syscon"; |
| reg = <0x0 0x1570000 0x0 0x10000>; |
| big-endian; |
| }; |
| |
| crypto: crypto@1700000 { |
| compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; |
| fsl,sec-era = <7>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x0 0x1700000 0x0 0x100000>; |
| ranges = <0x0 0x0 0x1700000 0x100000>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| |
| sec_jr0: jr@10000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x10000 0x10000>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr1: jr@20000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x20000 0x10000>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr2: jr@30000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x30000 0x10000>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr3: jr@40000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x40000 0x10000>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| }; |
| |
| clockgen: clocking@1ee1000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1ee1000 0x10000>; |
| |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-output-names = "sysclk"; |
| }; |
| |
| cga_pll1: pll@800 { |
| compatible = "fsl,qoriq-core-pll-2.0"; |
| #clock-cells = <1>; |
| reg = <0x800 0x10>; |
| clocks = <&sysclk>; |
| clock-output-names = "cga-pll1", "cga-pll1-div2", |
| "cga-pll1-div4"; |
| }; |
| |
| platform_clk: pll@c00 { |
| compatible = "fsl,qoriq-core-pll-2.0"; |
| #clock-cells = <1>; |
| reg = <0xc00 0x10>; |
| clocks = <&sysclk>; |
| clock-output-names = "platform-clk", "platform-clk-div2"; |
| }; |
| |
| cluster1_clk: clk0c0@0 { |
| compatible = "fsl,qoriq-core-mux-2.0"; |
| #clock-cells = <0>; |
| reg = <0x0 0x10>; |
| clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; |
| clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; |
| clock-output-names = "cluster1-clk"; |
| }; |
| }; |
| |
| dspi0: dspi@2100000 { |
| compatible = "fsl,ls1021a-v1.0-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "dspi"; |
| clocks = <&platform_clk 1>; |
| spi-num-chipselects = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| dspi1: dspi@2110000 { |
| compatible = "fsl,ls1021a-v1.0-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2110000 0x0 0x10000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "dspi"; |
| clocks = <&platform_clk 1>; |
| spi-num-chipselects = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@2180000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2180000 0x0 0x10000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&platform_clk 1>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2190000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2190000 0x0 0x10000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&platform_clk 1>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@21a0000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x21a0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "i2c"; |
| clocks = <&platform_clk 1>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@21c0500 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21c0500 0x0 0x100>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@21c0600 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21c0600 0x0 0x100>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@21d0500 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21d0500 0x0 0x100>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@21d0600 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21d0600 0x0 0x100>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@2300000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2300000 0x0 0x10000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@2310000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2310000 0x0 0x10000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2320000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2320000 0x0 0x10000>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@2330000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2330000 0x0 0x10000>; |
| interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| lpuart0: serial@2950000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2950000 0x0 0x1000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysclk>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart1: serial@2960000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2960000 0x0 0x1000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart2: serial@2970000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2970000 0x0 0x1000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart3: serial@2980000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2980000 0x0 0x1000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart4: serial@2990000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2990000 0x0 0x1000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart5: serial@29a0000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x29a0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| wdog0: watchdog@2ad0000 { |
| compatible = "fsl,imx21-wdt"; |
| reg = <0x0 0x2ad0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>; |
| clock-names = "wdog-en"; |
| big-endian; |
| }; |
| |
| sai1: sai@2b50000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,vf610-sai"; |
| reg = <0x0 0x2b50000 0x0 0x10000>; |
| interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>, <&platform_clk 1>, |
| <&platform_clk 1>, <&platform_clk 1>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dma-names = "tx", "rx"; |
| dmas = <&edma0 1 47>, |
| <&edma0 1 46>; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@2b60000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,vf610-sai"; |
| reg = <0x0 0x2b60000 0x0 0x10000>; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 1>, <&platform_clk 1>, |
| <&platform_clk 1>, <&platform_clk 1>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dma-names = "tx", "rx"; |
| dmas = <&edma0 1 45>, |
| <&edma0 1 44>; |
| status = "disabled"; |
| }; |
| |
| edma0: edma@2c00000 { |
| #dma-cells = <2>; |
| compatible = "fsl,vf610-edma"; |
| reg = <0x0 0x2c00000 0x0 0x10000>, |
| <0x0 0x2c10000 0x0 0x10000>, |
| <0x0 0x2c20000 0x0 0x10000>; |
| interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "edma-tx", "edma-err"; |
| dma-channels = <32>; |
| big-endian; |
| clock-names = "dmamux0", "dmamux1"; |
| clocks = <&platform_clk 1>, |
| <&platform_clk 1>; |
| }; |
| |
| dcu: dcu@2ce0000 { |
| compatible = "fsl,ls1021a-dcu"; |
| reg = <0x0 0x2ce0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&platform_clk 0>, |
| <&platform_clk 0>; |
| clock-names = "dcu", "pix"; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| mdio0: mdio@2d24000 { |
| compatible = "gianfar"; |
| device_type = "mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2d24000 0x0 0x4000>; |
| }; |
| |
| mdio1: mdio@2d64000 { |
| compatible = "gianfar"; |
| device_type = "mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2d64000 0x0 0x4000>, |
| <0x0 0x2d50030 0x0 0x4>; |
| }; |
| |
| ptp_clock@2d10e00 { |
| compatible = "fsl,etsec-ptp"; |
| reg = <0x0 0x2d10e00 0x0 0xb0>; |
| interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,tclk-period = <5>; |
| fsl,tmr-prsc = <2>; |
| fsl,tmr-add = <0xaaaaaaab>; |
| fsl,tmr-fiper1 = <999999990>; |
| fsl,tmr-fiper2 = <99990>; |
| fsl,max-adj = <499999999>; |
| }; |
| |
| enet0: ethernet@2d10000 { |
| compatible = "fsl,etsec2"; |
| device_type = "network"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| model = "eTSEC"; |
| fsl,magic-packet; |
| ranges; |
| dma-coherent; |
| |
| queue-group@2d10000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d10000 0x0 0x1000>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| queue-group@2d14000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d14000 0x0 0x1000>; |
| interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| enet1: ethernet@2d50000 { |
| compatible = "fsl,etsec2"; |
| device_type = "network"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| model = "eTSEC"; |
| ranges; |
| dma-coherent; |
| |
| queue-group@2d50000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d50000 0x0 0x1000>; |
| interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| queue-group@2d54000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d54000 0x0 0x1000>; |
| interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| enet2: ethernet@2d90000 { |
| compatible = "fsl,etsec2"; |
| device_type = "network"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| model = "eTSEC"; |
| ranges; |
| dma-coherent; |
| |
| queue-group@2d90000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d90000 0x0 0x1000>; |
| interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| queue-group@2d94000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d94000 0x0 0x1000>; |
| interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| usb@8600000 { |
| compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; |
| reg = <0x0 0x8600000 0x0 0x1000>; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| phy_type = "ulpi"; |
| }; |
| |
| usb3@3100000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| snps,quirk-frame-length-adjustment = <0x20>; |
| snps,dis_rxdet_inp3_quirk; |
| }; |
| |
| pcie@3400000 { |
| compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ |
| 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| fsl,pcie-scfg = <&scfg 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <4>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&msi1>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pcie@3500000 { |
| compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ |
| 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,pcie-scfg = <&scfg 1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <4>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&msi2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| }; |
