| /* |
| * Suppport for CompuLab CM-T54 on SB-T54 baseboard |
| */ |
| |
| #include "omap5-cm-t54.dts" |
| |
| / { |
| model = "CompuLab CM-T54 on SB-T54"; |
| compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; |
| }; |
| |
| &omap5_pmx_core { |
| i2c4_pins: pinmux_i2c4_pins { |
| pinctrl-single,pins = < |
| OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
| OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ |
| >; |
| }; |
| |
| mmc1_aux_pins: pinmux_mmc1_aux_pins { |
| pinctrl-single,pins = < |
| OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */ |
| OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */ |
| >; |
| }; |
| }; |
| |
| &mmc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &mmc1_pins |
| &mmc1_aux_pins |
| >; |
| cd-inverted; |
| wp-inverted; |
| cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */ |
| wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */ |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_pins>; |
| |
| clock-frequency = <400000>; |
| |
| at24@50 { |
| compatible = "at24,24c02"; |
| pagesize = <16>; |
| reg = <0x50>; |
| }; |
| }; |
