blob: 5e422486cf45171b59572f188e7d155e056e7fa4 [file] [log] [blame]
/*
* BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
*
* Copyright (C) 1999-2019, Broadcom.
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2 (the "GPL"),
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
* following added to such license:
*
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions of
* the license of that module. An independent module is a module which is not
* derived from this software. The special exception does not apply to any
* modifications of the software.
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a license
* other than the GPL, without Broadcom's express prior written consent.
*
*
* <<Broadcom-WL-IPTag/Open:>>
*
* $Id: sbpcmcia.h 647676 2016-07-07 02:59:05Z $
*/
#ifndef _SBPCMCIA_H
#define _SBPCMCIA_H
/* All the addresses that are offsets in attribute space are divided
* by two to account for the fact that odd bytes are invalid in
* attribute space and our read/write routines make the space appear
* as if they didn't exist. Still we want to show the original numbers
* as documented in the hnd_pcmcia core manual.
*/
/* PCMCIA Function Configuration Registers */
#define PCMCIA_FCR (0x700 / 2)
#define FCR0_OFF 0
#define FCR1_OFF (0x40 / 2)
#define FCR2_OFF (0x80 / 2)
#define FCR3_OFF (0xc0 / 2)
#define PCMCIA_FCR0 (0x700 / 2)
#define PCMCIA_FCR1 (0x740 / 2)
#define PCMCIA_FCR2 (0x780 / 2)
#define PCMCIA_FCR3 (0x7c0 / 2)
/* Standard PCMCIA FCR registers */
#define PCMCIA_COR 0
#define COR_RST 0x80
#define COR_LEV 0x40
#define COR_IRQEN 0x04
#define COR_BLREN 0x01
#define COR_FUNEN 0x01
#define PCICIA_FCSR (2 / 2)
#define PCICIA_PRR (4 / 2)
#define PCICIA_SCR (6 / 2)
#define PCICIA_ESR (8 / 2)
#define PCM_MEMOFF 0x0000
#define F0_MEMOFF 0x1000
#define F1_MEMOFF 0x2000
#define F2_MEMOFF 0x3000
#define F3_MEMOFF 0x4000
/* Memory base in the function fcr's */
#define MEM_ADDR0 (0x728 / 2)
#define MEM_ADDR1 (0x72a / 2)
#define MEM_ADDR2 (0x72c / 2)
/* PCMCIA base plus Srom access in fcr0: */
#define PCMCIA_ADDR0 (0x072e / 2)
#define PCMCIA_ADDR1 (0x0730 / 2)
#define PCMCIA_ADDR2 (0x0732 / 2)
#define MEM_SEG (0x0734 / 2)
#define SROM_CS (0x0736 / 2)
#define SROM_DATAL (0x0738 / 2)
#define SROM_DATAH (0x073a / 2)
#define SROM_ADDRL (0x073c / 2)
#define SROM_ADDRH (0x073e / 2)
#define SROM_INFO2 (0x0772 / 2) /* Corerev >= 2 && <= 5 */
#define SROM_INFO (0x07be / 2) /* Corerev >= 6 */
/* Values for srom_cs: */
#define SROM_IDLE 0
#define SROM_WRITE 1
#define SROM_READ 2
#define SROM_WEN 4
#define SROM_WDS 7
#define SROM_DONE 8
/* Fields in srom_info: */
#define SRI_SZ_MASK 0x03
#define SRI_BLANK 0x04
#define SRI_OTP 0x80
#define SROM16K_BANK_SEL_MASK (3 << 11)
#define SROM16K_BANK_SHFT_MASK 11
#define SROM16K_ADDR_SEL_MASK ((1 << SROM16K_BANK_SHFT_MASK) - 1)
#define SROM_PRSNT_MASK 0x1
#define SROM_SUPPORT_SHIFT_MASK 30
#define SROM_SUPPORTED (0x1 << SROM_SUPPORT_SHIFT_MASK)
#define SROM_SIZE_MASK 0x00000006
#define SROM_SIZE_2K 2
#define SROM_SIZE_512 1
#define SROM_SIZE_128 0
#define SROM_SIZE_SHFT_MASK 1
/* Standard tuples we know about */
#define CISTPL_NULL 0x00
#define CISTPL_END 0xff /* End of the CIS tuple chain */
#define CISTPL_BRCM_HNBU 0x80
#define HNBU_BOARDREV 0x02 /* One byte board revision */
#define HNBU_BOARDTYPE 0x1b /* 2 bytes; boardtype */
#define HNBU_HNBUCIS 0x1d /* what follows is proprietary HNBU CIS format */
/* sbtmstatelow */
#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */
#define SBTML_INT_EN 0x20000 /* enable sb interrupt */
/* sbtmstatehigh */
#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
#endif /* _SBPCMCIA_H */