| /* |
| * Minimal debug/trace/assert driver definitions for |
| * Broadcom 802.11 Networking Adapter. |
| * |
| * Copyright (C) 1999-2015, Broadcom Corporation |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2 (the "GPL"), |
| * available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| * following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give you |
| * permission to link this software with independent modules, and to copy and |
| * distribute the resulting executable under terms of your choice, provided that |
| * you also meet, for each linked independent module, the terms and conditions of |
| * the license of that module. An independent module is a module which is not |
| * derived from this software. The special exception does not apply to any |
| * modifications of the software. |
| * |
| * Notwithstanding the above, under no circumstances may you combine this |
| * software in any way with any other Broadcom software provided under a license |
| * other than the GPL, without Broadcom's express prior written consent. |
| * |
| * $Id: wl_dbg.h 472390 2014-04-23 23:32:01Z $ |
| */ |
| |
| |
| #ifndef _wl_dbg_h_ |
| #define _wl_dbg_h_ |
| |
| /* wl_msg_level is a bit vector with defs in wlioctl.h */ |
| extern uint32 wl_msg_level; |
| extern uint32 wl_msg_level2; |
| |
| #define WL_TIMESTAMP() |
| |
| #if 0 && (VERSION_MAJOR > 9) |
| extern int osl_printf(const char *fmt, ...); |
| #include <IOKit/apple80211/IO8Log.h> |
| #define WL_PRINT(args) do { osl_printf args; } while (0) |
| #define RELEASE_PRINT(args) do { WL_PRINT(args); IO8Log args; } while (0) |
| #else |
| #define WL_PRINT(args) do { WL_TIMESTAMP(); printf args; } while (0) |
| #endif |
| |
| #if defined(EVENT_LOG_COMPILE) && defined(WLMSG_SRSCAN) |
| #define _WL_SRSCAN(fmt, ...) EVENT_LOG(EVENT_LOG_TAG_SRSCAN, fmt, ##__VA_ARGS__) |
| #define WL_SRSCAN(args) _WL_SRSCAN args |
| #else |
| #define WL_SRSCAN(args) |
| #endif |
| |
| #if defined(BCMCONDITIONAL_LOGGING) |
| |
| /* Ideally this should be some include file that vendors can include to conditionalize logging */ |
| |
| /* DBGONLY() macro to reduce ifdefs in code for statements that are only needed when |
| * BCMDBG is defined. |
| */ |
| #define DBGONLY(x) |
| |
| /* To disable a message completely ... until you need it again */ |
| #define WL_NONE(args) |
| #define WL_ERROR(args) do {if (wl_msg_level & WL_ERROR_VAL) WL_PRINT(args);} while (0) |
| #define WL_TRACE(args) |
| #define WL_PRHDRS_MSG(args) |
| #define WL_PRHDRS(i, p, f, t, r, l) |
| #define WL_PRPKT(m, b, n) |
| #define WL_INFORM(args) |
| #define WL_TMP(args) |
| #define WL_OID(args) |
| #define WL_RATE(args) do {if (wl_msg_level & WL_RATE_VAL) WL_PRINT(args);} while (0) |
| #define WL_ASSOC(args) do {if (wl_msg_level & WL_ASSOC_VAL) WL_PRINT(args);} while (0) |
| #define WL_PRUSR(m, b, n) |
| #define WL_PS(args) do {if (wl_msg_level & WL_PS_VAL) WL_PRINT(args);} while (0) |
| |
| #define WL_PORT(args) |
| #define WL_DUAL(args) |
| #define WL_REGULATORY(args) do {if (wl_msg_level & WL_REGULATORY_VAL) WL_PRINT(args);} while (0) |
| |
| #define WL_MPC(args) |
| #define WL_APSTA(args) |
| #define WL_APSTA_BCN(args) |
| #define WL_APSTA_TX(args) |
| #define WL_APSTA_TSF(args) |
| #define WL_APSTA_BSSID(args) |
| #define WL_BA(args) |
| #define WL_MBSS(args) |
| #define WL_PROTO(args) |
| |
| #define WL_CAC(args) do {if (wl_msg_level & WL_CAC_VAL) WL_PRINT(args);} while (0) |
| #define WL_AMSDU(args) |
| #define WL_AMPDU(args) |
| #define WL_FFPLD(args) |
| #define WL_MCHAN(args) |
| |
| #define WL_DFS(args) |
| #define WL_WOWL(args) |
| #define WL_DPT(args) |
| #define WL_ASSOC_OR_DPT(args) |
| #define WL_SCAN(args) do {if (wl_msg_level2 & WL_SCAN_VAL) WL_PRINT(args);} while (0) |
| #define WL_COEX(args) |
| #define WL_RTDC(w, s, i, j) |
| #define WL_RTDC2(w, s, i, j) |
| #define WL_CHANINT(args) |
| #define WL_BTA(args) |
| #define WL_P2P(args) |
| #define WL_ITFR(args) |
| #define WL_TDLS(args) |
| #define WL_MCNX(args) |
| #define WL_PROT(args) |
| #define WL_PSTA(args) |
| #define WL_TRF_MGMT(args) |
| #define WL_L2FILTER(args) |
| #define WL_MQ(args) |
| #define WL_TXBF(args) |
| #define WL_P2PO(args) |
| #define WL_NET_DETECT(args) |
| #define WL_ROAM(args) |
| #define WL_WNM(args) |
| |
| |
| #define WL_AMPDU_UPDN(args) |
| #define WL_AMPDU_RX(args) |
| #define WL_AMPDU_ERR(args) |
| #define WL_AMPDU_TX(args) |
| #define WL_AMPDU_CTL(args) |
| #define WL_AMPDU_HW(args) |
| #define WL_AMPDU_HWTXS(args) |
| #define WL_AMPDU_HWDBG(args) |
| #define WL_AMPDU_STAT(args) |
| #define WL_AMPDU_ERR_ON() 0 |
| #define WL_AMPDU_HW_ON() 0 |
| #define WL_AMPDU_HWTXS_ON() 0 |
| |
| #define WL_APSTA_UPDN(args) |
| #define WL_APSTA_RX(args) |
| #define WL_WSEC(args) |
| #define WL_WSEC_DUMP(args) |
| #define WL_PCIE(args) |
| #define WL_CHANLOG(w, s, i, j) |
| |
| #define WL_ERROR_ON() (wl_msg_level & WL_ERROR_VAL) |
| #define WL_TRACE_ON() 0 |
| #define WL_PRHDRS_ON() 0 |
| #define WL_PRPKT_ON() 0 |
| #define WL_INFORM_ON() 0 |
| #define WL_TMP_ON() 0 |
| #define WL_OID_ON() 0 |
| #define WL_RATE_ON() (wl_msg_level & WL_RATE_VAL) |
| #define WL_ASSOC_ON() (wl_msg_level & WL_ASSOC_VAL) |
| #define WL_PRUSR_ON() 0 |
| #define WL_PS_ON() (wl_msg_level & WL_PS_VAL) |
| #define WL_PORT_ON() 0 |
| #define WL_WSEC_ON() 0 |
| #define WL_WSEC_DUMP_ON() 0 |
| #define WL_MPC_ON() 0 |
| #define WL_REGULATORY_ON() (wl_msg_level & WL_REGULATORY_VAL) |
| #define WL_APSTA_ON() 0 |
| #define WL_DFS_ON() 0 |
| #define WL_MBSS_ON() 0 |
| #define WL_CAC_ON() (wl_msg_level & WL_CAC_VAL) |
| #define WL_AMPDU_ON() 0 |
| #define WL_DPT_ON() 0 |
| #define WL_WOWL_ON() 0 |
| #define WL_SCAN_ON() (wl_msg_level2 & WL_SCAN_VAL) |
| #define WL_BTA_ON() 0 |
| #define WL_P2P_ON() 0 |
| #define WL_ITFR_ON() 0 |
| #define WL_MCHAN_ON() 0 |
| #define WL_TDLS_ON() 0 |
| #define WL_MCNX_ON() 0 |
| #define WL_PROT_ON() 0 |
| #define WL_PSTA_ON() 0 |
| #define WL_TRF_MGMT_ON() 0 |
| #define WL_LPC_ON() 0 |
| #define WL_L2FILTER_ON() 0 |
| #define WL_TXBF_ON() 0 |
| #define WL_P2PO_ON() 0 |
| #define WL_CHANLOG_ON() 0 |
| #define WL_NET_DETECT_ON() 0 |
| #define WL_WNM_ON() 0 |
| #define WL_PCIE_ON() 0 |
| |
| #else /* !BCMDBG */ |
| |
| /* DBGONLY() macro to reduce ifdefs in code for statements that are only needed when |
| * BCMDBG is defined. |
| */ |
| #define DBGONLY(x) |
| |
| /* To disable a message completely ... until you need it again */ |
| #define WL_NONE(args) |
| |
| #define WL_ERROR(args) |
| #define WL_TRACE(args) |
| #ifndef LINUX_POSTMOGRIFY_REMOVAL |
| #ifdef WLMSG_PRHDRS |
| #define WL_PRHDRS_MSG(args) WL_PRINT(args) |
| #define WL_PRHDRS(i, p, f, t, r, l) wlc_print_hdrs(i, p, f, t, r, l) |
| #else |
| #define WL_PRHDRS_MSG(args) |
| #define WL_PRHDRS(i, p, f, t, r, l) |
| #endif |
| #ifdef WLMSG_PRPKT |
| #define WL_PRPKT(m, b, n) prhex(m, b, n) |
| #else |
| #define WL_PRPKT(m, b, n) |
| #endif |
| #ifdef WLMSG_INFORM |
| #define WL_INFORM(args) WL_PRINT(args) |
| #else |
| #define WL_INFORM(args) |
| #endif |
| #define WL_TMP(args) |
| #ifdef WLMSG_OID |
| #define WL_OID(args) WL_PRINT(args) |
| #else |
| #define WL_OID(args) |
| #endif |
| #define WL_RATE(args) |
| #ifdef WLMSG_ASSOC |
| #define WL_ASSOC(args) WL_PRINT(args) |
| #else |
| #define WL_ASSOC(args) |
| #endif |
| #define WL_PRUSR(m, b, n) |
| #ifdef WLMSG_PS |
| #define WL_PS(args) WL_PRINT(args) |
| #else |
| #define WL_PS(args) |
| #endif |
| #ifdef WLMSG_ROAM |
| #define WL_ROAM(args) WL_PRINT(args) |
| #else |
| #define WL_ROAM(args) |
| #endif |
| #define WL_PORT(args) |
| #define WL_DUAL(args) |
| #define WL_REGULATORY(args) |
| |
| #ifdef WLMSG_MPC |
| #define WL_MPC(args) WL_PRINT(args) |
| #else |
| #define WL_MPC(args) |
| #endif |
| #define WL_APSTA(args) |
| #define WL_APSTA_BCN(args) |
| #define WL_APSTA_TX(args) |
| #define WL_APSTA_TSF(args) |
| #define WL_APSTA_BSSID(args) |
| #define WL_BA(args) |
| #define WL_MBSS(args) |
| #define WL_MODE_SWITCH(args) |
| #define WL_PROTO(args) |
| |
| #define WL_CAC(args) |
| #define WL_AMSDU(args) |
| #define WL_AMPDU(args) |
| #define WL_FFPLD(args) |
| #define WL_MCHAN(args) |
| |
| /* Define WLMSG_DFS automatically for WLTEST builds */ |
| |
| #ifdef WLMSG_DFS |
| #define WL_DFS(args) do {if (wl_msg_level & WL_DFS_VAL) WL_PRINT(args);} while (0) |
| #else /* WLMSG_DFS */ |
| #define WL_DFS(args) |
| #endif /* WLMSG_DFS */ |
| #define WL_WOWL(args) |
| #ifdef WLMSG_SCAN |
| #define WL_SCAN(args) WL_PRINT(args) |
| #else |
| #define WL_SCAN(args) |
| #endif |
| #define WL_COEX(args) |
| #define WL_RTDC(w, s, i, j) |
| #define WL_RTDC2(w, s, i, j) |
| #define WL_CHANINT(args) |
| #ifdef WLMSG_BTA |
| #define WL_BTA(args) WL_PRINT(args) |
| #else |
| #define WL_BTA(args) |
| #endif |
| #define WL_WMF(args) |
| #define WL_P2P(args) |
| #define WL_ITFR(args) |
| #define WL_TDLS(args) |
| #define WL_MCNX(args) |
| #define WL_PROT(args) |
| #define WL_PSTA(args) |
| #define WL_TBTT(args) |
| #define WL_TRF_MGMT(args) |
| #define WL_L2FILTER(args) |
| #define WL_MQ(args) |
| #define WL_P2PO(args) |
| #define WL_WNM(args) |
| #define WL_TXBF(args) |
| #define WL_CHANLOG(w, s, i, j) |
| #define WL_NET_DETECT(args) |
| |
| #define WL_ERROR_ON() 0 |
| #define WL_TRACE_ON() 0 |
| #ifdef WLMSG_PRHDRS |
| #define WL_PRHDRS_ON() 1 |
| #else |
| #define WL_PRHDRS_ON() 0 |
| #endif |
| #ifdef WLMSG_PRPKT |
| #define WL_PRPKT_ON() 1 |
| #else |
| #define WL_PRPKT_ON() 0 |
| #endif |
| #ifdef WLMSG_INFORM |
| #define WL_INFORM_ON() 1 |
| #else |
| #define WL_INFORM_ON() 0 |
| #endif |
| #ifdef WLMSG_OID |
| #define WL_OID_ON() 1 |
| #else |
| #define WL_OID_ON() 0 |
| #endif |
| #define WL_TMP_ON() 0 |
| #define WL_RATE_ON() 0 |
| #ifdef WLMSG_ASSOC |
| #define WL_ASSOC_ON() 1 |
| #else |
| #define WL_ASSOC_ON() 0 |
| #endif |
| #define WL_PORT_ON() 0 |
| #ifdef WLMSG_WSEC |
| #define WL_WSEC_ON() 1 |
| #define WL_WSEC_DUMP_ON() 1 |
| #else |
| #define WL_WSEC_ON() 0 |
| #define WL_WSEC_DUMP_ON() 0 |
| #endif |
| #ifdef WLMSG_MPC |
| #define WL_MPC_ON() 1 |
| #else |
| #define WL_MPC_ON() 0 |
| #endif |
| #define WL_REGULATORY_ON() 0 |
| |
| #define WL_APSTA_ON() 0 |
| #define WL_BA_ON() 0 |
| #define WL_MBSS_ON() 0 |
| #define WL_MODE_SWITCH_ON() 0 |
| #ifdef WLMSG_DFS |
| #define WL_DFS_ON() 1 |
| #else /* WLMSG_DFS */ |
| #define WL_DFS_ON() 0 |
| #endif /* WLMSG_DFS */ |
| #ifdef WLMSG_SCAN |
| #define WL_SCAN_ON() 1 |
| #else |
| #define WL_SCAN_ON() 0 |
| #endif |
| #ifdef WLMSG_BTA |
| #define WL_BTA_ON() 1 |
| #else |
| #define WL_BTA_ON() 0 |
| #endif |
| #define WL_WMF_ON() 0 |
| #define WL_P2P_ON() 0 |
| #define WL_MCHAN_ON() 0 |
| #define WL_TDLS_ON() 0 |
| #define WL_MCNX_ON() 0 |
| #define WL_PROT_ON() 0 |
| #define WL_TBTT_ON() 0 |
| #define WL_PWRSEL_ON() 0 |
| #define WL_L2FILTER_ON() 0 |
| #define WL_MQ_ON() 0 |
| #define WL_P2PO_ON() 0 |
| #define WL_TXBF_ON() 0 |
| #define WL_CHANLOG_ON() 0 |
| |
| #define WL_AMPDU_UPDN(args) |
| #define WL_AMPDU_RX(args) |
| #define WL_AMPDU_ERR(args) |
| #define WL_AMPDU_TX(args) |
| #define WL_AMPDU_CTL(args) |
| #define WL_AMPDU_HW(args) |
| #define WL_AMPDU_HWTXS(args) |
| #define WL_AMPDU_HWDBG(args) |
| #define WL_AMPDU_STAT(args) |
| #define WL_AMPDU_ERR_ON() 0 |
| #define WL_AMPDU_HW_ON() 0 |
| #define WL_AMPDU_HWTXS_ON() 0 |
| |
| #define WL_WNM_ON() 0 |
| #endif /* LINUX_POSTMOGRIFY_REMOVAL */ |
| #define WL_APSTA_UPDN(args) |
| #define WL_APSTA_RX(args) |
| #ifdef WLMSG_WSEC |
| #define WL_WSEC(args) WL_PRINT(args) |
| #define WL_WSEC_DUMP(args) WL_PRINT(args) |
| #else |
| #define WL_WSEC(args) |
| #define WL_WSEC_DUMP(args) |
| #endif |
| #define WL_PCIE(args) do {if (wl_msg_level2 & WL_PCIE_VAL) WL_PRINT(args);} while (0) |
| #define WL_PCIE_ON() (wl_msg_level2 & WL_PCIE_VAL) |
| #endif |
| |
| extern uint32 wl_msg_level; |
| extern uint32 wl_msg_level2; |
| #endif /* _wl_dbg_h_ */ |