blob: 6700685e52a02d1177e9ce8804eb23fb63cfd33d [file] [log] [blame]
/*
* EVENT_LOG system definitions
*
* Copyright (C) 2020, Broadcom.
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2 (the "GPL"),
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
* following added to such license:
*
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions of
* the license of that module. An independent module is a module which is not
* derived from this software. The special exception does not apply to any
* modifications of the software.
*
*
* <<Broadcom-WL-IPTag/Dual:>>
*/
#ifndef _EVENT_LOG_SET_H_
#define _EVENT_LOG_SET_H_
/* Set assignments */
#define EVENT_LOG_SET_BUS (0u)
#define EVENT_LOG_SET_WL (1u)
#define EVENT_LOG_SET_PSM (2u)
#define EVENT_LOG_SET_ERROR (3u)
/* MSCH logging */
#define EVENT_LOG_SET_MSCH_PROFILER (4u)
/* A particular customer uses sets 5, 6, and 7. There is a request
* to not name these log sets as that could limit their ability to
* use different log sets in future.
* Sets 5, 6, and 7 are instantiated by host
* In such case, ecounters could be mapped to any set that host
* configures. They may or may not use set 5.
*/
#define EVENT_LOG_SET_5 (5u)
#define EVENT_LOG_SET_ECOUNTERS (EVENT_LOG_SET_5)
#define EVENT_LOG_SET_6 (6u)
#define EVENT_LOG_SET_7 (7u)
/* Temporary change to satisfy compilation across branches
* Will be removed after checkin
*/
#define EVENT_LOG_SET_8 (8u)
#define EVENT_LOG_SET_PRSRV (EVENT_LOG_SET_8)
#define EVENT_LOG_SET_9 (9u)
/* General purpose preserve chatty.
* EVENT_LOG_SET_PRSRV_CHATTY log set should not be used by FW as it is
* used by customer host. FW should use EVENT_LOG_SET_GP_PRSRV_CHATTY
* for general purpose preserve chatty logs.
*/
#define EVENT_LOG_SET_GP_PRSRV_CHATTY (EVENT_LOG_SET_9)
#define EVENT_LOG_SET_PRSRV_CHATTY (EVENT_LOG_SET_6)
/* BUS preserve */
#define EVENT_LOG_SET_PRSRV_BUS (10u)
/* WL preserve */
#define EVENT_LOG_SET_PRSRV_WL (11u)
/* Slotted BSS set */
#define EVENT_LOG_SET_WL_SLOTTED_BSS (12u)
/* PHY entity logging */
#define EVENT_LOG_SET_PHY (13u)
/* PHY preserve */
#define EVENT_LOG_SET_PRSRV_PHY (14u)
/* RTE entity */
#define EVENT_LOG_SET_RTE (15u)
/* Malloc and free logging */
#define EVENT_LOG_SET_MEM_API (16u)
/* Console buffer */
#define EVENT_LOG_SET_RTE_CONS_BUF (17u)
/* three log sets for general debug purposes */
#define EVENT_LOG_SET_GENERAL_DBG_1 (18u)
#define EVENT_LOG_SET_GENERAL_DBG_2 (19u)
#define EVENT_LOG_SET_GENERAL_DBG_3 (20u)
/* Log sets for capturing power related logs. Note that these sets
* are to be used across entire system and not just WL.
*/
#define EVENT_LOG_SET_POWER_1 (21u)
#define EVENT_LOG_SET_POWER_2 (22u)
/* Used for timestamp plotting, TS_LOG() */
#define EVENT_LOG_SET_TS_LOG (23u)
/* BUS preserve chatty */
#define EVENT_LOG_SET_PRSRV_BUS_CHATTY (24u)
/* PRESERVE_PREIODIC_LOG_SET */
/* flush if host is in D0 at every period */
#define EVENT_LOG_SET_PRSV_PERIODIC (25u)
/* AMT logging and other related information */
#define EVENT_LOG_SET_AMT (26u)
/* State machine logging. Part of preserve logs */
#define EVENT_LOG_SET_FSM (27u)
/* wbus related logging */
#define EVENT_LOG_SET_WBUS (28u)
#ifndef NUM_EVENT_LOG_SETS
/* Set a maximum number of sets here. It is not dynamic for
* efficiency of the EVENT_LOG calls. Old branches could define
* this to an appropriat enumber in their makefiles to reduce
* ROM invalidation
*/
#ifdef NUM_EVENT_LOG_SETS_V2
/* for v2, everything has became unsigned */
#define NUM_EVENT_LOG_SETS (29u)
#else /* NUM_EVENT_LOG_SETS_V2 */
#define NUM_EVENT_LOG_SETS (29)
#endif /* NUM_EVENT_LOG_SETS_V2 */
#endif /* NUM_EVENT_LOG_SETS */
/* send delayed logs when >= 50% of buffer is full */
#ifndef ECOUNTERS_DELAYED_FLUSH_PERCENTAGE
#define ECOUNTERS_DELAYED_FLUSH_PERCENTAGE (50)
#endif
#endif /* _EVENT_LOG_SET_H_ */