blob: ac7567f0e0f32c6590a7bece79a2df7de813a316 [file] [log] [blame]
# Copyright (C) 2010 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# This file is the device-specific product definition file for
# crespo. It lists all the overlays, files, modules and properties
# that are specific to this hardware: i.e. those are device-specific
# drivers, configuration files, settings, etc...
# Note that crespo is not a fully open device. Some of the drivers
# aren't publicly available in all circumstances, which means that some
# of the hardware capabilities aren't present in builds where those
# drivers aren't available. Such cases are handled by having this file
# separated into two halves: this half here contains the parts that
# are available to everyone, while another half in the vendor/ hierarchy
# augments that set with the parts that are only relevant when all the
# associated drivers are available. Aspects that are irrelevant but
# harmless in no-driver builds should be kept here for simplicity and
# transparency. There are two variants of the half that deals with
# the unavailable drivers: one is directly checked into the unreleased
# vendor tree and is used by engineers who have access to it. The other
# is generated by setup-makefile.sh in the same directory as this files,
# and is used by people who have access to binary versions of the drivers
# but not to the original vendor tree. Be sure to update both.
# These is the hardware-specific overlay, which points to the location
# of hardware-specific resource overrides, typically the frameworks and
# application settings that are stored in resourced.
DEVICE_PACKAGE_OVERLAYS := device/samsung/crespo/overlay
# These are the hardware-specific configuration files
PRODUCT_COPY_FILES := \
device/samsung/crespo/vold.fstab:system/etc/vold.fstab \
device/samsung/crespo/egl.cfg:system/lib/egl/egl.cfg
# Init files
PRODUCT_COPY_FILES += \
device/samsung/crespo/init.herring.rc:root/init.herring.rc \
device/samsung/crespo/ueventd.herring.rc:root/ueventd.herring.rc
# Prebuilt kl keymaps
PRODUCT_COPY_FILES += \
device/samsung/crespo/s3c-keypad.kl:system/usr/keylayout/s3c-keypad.kl \
device/samsung/crespo/cypress-touchkey.kl:system/usr/keylayout/cypress-touchkey.kl \
device/samsung/crespo/sec_jack.kl:system/usr/keylayout/sec_jack.kl \
device/samsung/crespo/herring-keypad.kl:system/usr/keylayout/herring-keypad.kl
# Generated kcm keymaps
PRODUCT_PACKAGES := \
s3c-keypad.kcm \
cypress-touchkey.kcm
# Filesystem management tools
PRODUCT_PACKAGES += \
make_ext4fs \
setup_fs
PRODUCT_CHARACTERISTICS := nosdcard
# These are the OpenMAX IL configuration files
PRODUCT_COPY_FILES += \
device/samsung/crespo/sec_mm/sec_omx/sec_omx_core/secomxregistry:system/etc/secomxregistry \
device/samsung/crespo/media_profiles.xml:system/etc/media_profiles.xml
# These are the OpenMAX IL modules
PRODUCT_PACKAGES += \
libSEC_OMX_Core \
libOMX.SEC.AVC.Decoder \
libOMX.SEC.M4V.Decoder \
libOMX.SEC.M4V.Encoder \
libOMX.SEC.AVC.Encoder
# Misc other modules
PRODUCT_PACKAGES += \
lights.s5pc110 \
overlay.s5pc110 \
sensors.herring
# Libs
PRODUCT_PACKAGES += \
libcamera \
libstagefrighthw
# NFC
PRODUCT_PACKAGES += \
libnfc \
libnfc_jni \
Nfc \
Tag
# Input device calibration files
PRODUCT_COPY_FILES += \
device/samsung/crespo/mxt224_ts_input.idc:system/usr/idc/mxt224_ts_input.idc
# These are the hardware-specific features
PRODUCT_COPY_FILES += \
frameworks/base/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
frameworks/base/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
frameworks/base/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
frameworks/base/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
frameworks/base/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
frameworks/base/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
frameworks/base/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
frameworks/base/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
frameworks/base/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/base/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
frameworks/base/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
frameworks/base/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
PRODUCT_PROPERTY_OVERRIDES := \
ro.opengles.version=131072
# These are the hardware-specific settings that are stored in system properties.
# Note that the only such settings should be the ones that are too low-level to
# be reachable from resources or other mechanisms.
PRODUCT_PROPERTY_OVERRIDES += \
wifi.interface=eth0 \
wifi.supplicant_scan_interval=15 \
dalvik.vm.heapsize=32m
# we have enough storage space to hold precise GC data
PRODUCT_TAGS += dalvik.gc.type-precise
# Screen density is actually considered a locale (since it is taken into account
# the the build-time selection of resources). The product definitions including
# this file must pay attention to the fact that the first entry in the final
# PRODUCT_LOCALES expansion must not be a density.
PRODUCT_LOCALES := hdpi
PRODUCT_COPY_FILES += \
device/samsung/crespo/bcm4329.ko:system/modules/bcm4329.ko
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := device/samsung/crespo/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel
# See comment at the top of this file. This is where the other
# half of the device-specific product definition file takes care
# of the aspects that require proprietary drivers that aren't
# commonly available
$(call inherit-product-if-exists, vendor/samsung/crespo/device-vendor.mk)