| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2014, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| |
| <!-- If this is true, the screen will fade off. --> |
| <bool name="config_animateScreenLights">false</bool> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N 1 zones as follows: |
| |
| Zone 0: 0 <= LUX < array[0] |
| Zone 1: array[0] <= LUX < array[1] |
| ... |
| Zone N: array[N - 1] <= LUX < array[N] |
| Zone N + 1 array[N] <= LUX < infinity |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>9</item> |
| <item>30</item> |
| <item>100</item> |
| <item>325</item> |
| <item>1250</item> |
| <item>3500</item> |
| <item>10000</item> |
| <item>20000</item> |
| </integer-array> |
| |
| <!-- Array of output values for LCD backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| <!-- 9 --> <item>18</item> |
| <!-- 30 --> <item>30</item> |
| <!-- 100 --> <item>59</item> |
| <!-- 325 --> <item>74</item> |
| <!-- 1250 --> <item>92</item> |
| <!-- 3500 --> <item>118</item> |
| <!-- 10000 --> <item>155</item> |
| <!-- 20000 --> <item>222</item> |
| <item>255</item> |
| </integer-array> |
| |
| <!-- Array of output values for button backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessButtonBacklightValues"> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| </integer-array> |
| |
| <!-- Minimum screen brightness allowed by the power manager. --> |
| <integer name="config_screenBrightnessDim">17</integer> |
| |
| <!-- Screen brightness when dozing. --> |
| <integer name="config_screenBrightnessDoze">17</integer> |
| |
| <!-- Default screen brightness setting. |
| Must be in the range specified by minimum and maximum. --> |
| <integer name="config_screenBrightnessSettingDefault">82</integer> |
| |
| <!-- Minimum screen brightness setting allowed by the power manager. |
| The user is forbidden from setting the brightness below this level. --> |
| <integer name="config_screenBrightnessSettingMinimum">17</integer> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true --> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> |
| <bool name="config_cellBroadcastAppLinks">true</bool> |
| |
| <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> |
| <integer name="config_shutdownBatteryTemperature">680</integer> |
| |
| <!-- Default color for notification LED is white. --> |
| <color name="config_defaultNotificationColor">#ffffffff</color> |
| |
| <!-- Default LED on time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOn">1000</integer> |
| |
| <!-- Default LED off time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOff">9000</integer> |
| |
| <!-- reference volume index for music stream to limit headphone volume and display warning --> |
| <integer name="config_safe_media_volume_index">6</integer> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| <item>"rndis\\d"</item> |
| </string-array> |
| |
| <string-array translatable="false" name="config_oemUsbModeOverride"> |
| <item>"bp-tools:rndis,adb:rndis,diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet,adb"</item> |
| <item>"bp-tools:rndis:rndis,diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet,adb"</item> |
| <item>"bp-tools:mtp,adb:diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet,adb"</item> |
| <item>"bp-tools:mtp:diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,usbnet"</item> |
| <item>"mot-factory:rndis,adb:usbnet,adb"</item> |
| <item>"mot-factory:rndis:usbnet"</item> |
| <item>"mot-factory:mtp,adb:usbnet,adb"</item> |
| <item>"mot-factory:mtp:usbnet"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wlan0"</item> |
| <item>"softap.*"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this |
| should be empty. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| <item>"bt-pan"</item> |
| </string-array> |
| |
| <!-- Array of allowable ConnectivityManager network types for tethering --> |
| <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or |
| [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| <item>0</item> |
| <item>1</item> |
| <item>5</item> |
| <item>7</item> |
| </integer-array> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,2,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"mobile_ia,14,0,2,-1,true"</item> |
| <item>"bluetooth,7,7,2,-1,true"</item> |
| <item>"ethernet,9,9,9,-1,true"</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| <item>"7,1"</item> |
| </string-array> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has background scan support --> |
| <bool translatable="false" name="config_wifi_background_scan_support">true</bool> |
| |
| <!-- string indicating the OUI that should be used when generating random mac addresses --> |
| <string translatable="false" name="config_wifi_random_mac_oui">92-68-C3</string> |
| |
| <!-- Setting this true forces the headset jack switches to use the/dev/input/event subsystem |
| rather than the uevent framework. --> |
| <bool name="config_useDevInputEventForAudioJack">true</bool> |
| |
| <!-- Indicate whether closing the lid causes the device to go to sleep and opening |
| it causes the device to wake up. |
| The default is false. --> |
| <bool name="config_lidControlsSleep">true</bool> |
| |
| <!-- Indicate whether to allow the device to suspend when the screen is off |
| due to the proximity sensor. This resource should only be set to true |
| if the sensor HAL correctly handles the proximity sensor as a wake-up source. |
| Otherwise, the device may fail to wake out of suspend reliably. |
| The default is false. --> |
| <bool name="config_suspendWhenScreenOffDueToProximity">true</bool> |
| |
| <!-- Vibrator pattern for feedback about a long screen/key press --> |
| <integer-array name="config_longPressVibePattern"> |
| <item>0</item> |
| <item>25</item> |
| <item>10</item> |
| </integer-array> |
| |
| <!-- Make things go fast --> |
| <bool name="config_ui_enableFadingMarquee">false</bool> |
| |
| <!-- Vibrator pattern for feedback about touching a virtual key --> |
| <integer-array name="config_virtualKeyVibePattern"> |
| <item>0</item> |
| <item>25</item> |
| <item>8</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> |
| <integer-array name="config_keyboardTapVibePattern"> |
| <item>25</item> |
| </integer-array> |
| |
| <!-- Wifi driver supports batched scan --> |
| <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool> |
| |
| <!-- MMS user agent string --> |
| <string name="config_mms_user_agent" translatable="false">nexus6</string> |
| |
| <!-- MMS user agent prolfile url --> |
| <string name="config_mms_user_agent_profile_url" translatable="false">http://uaprof.motorola.com/phoneconfig/nexus6/Profile/nexus6.rdf</string> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">4</integer> |
| <!-- Whether Multiuser UI should be shown --> |
| <bool name="config_enableMultiUserUI">true</bool> |
| |
| <!-- Dream of notifications --> |
| <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> |
| <bool name="config_dozeAfterScreenOff">true</bool> |
| <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> |
| |
| <!-- Is the device capable of hot swapping an UICC Card --> |
| <bool name="config_hotswapCapable">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is availasble on device --> |
| <bool name="config_device_volte_available">true</bool> |
| |
| <!-- Configure mobile tcp buffer sizes in the form: |
| rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max |
| If no value is found for the rat-name in use, the system default will be applied. |
| --> |
| <string-array name="config_mobile_tcp_buffers"> |
| <item>umts:131072,262144,1452032,4096,16384,399360</item> |
| <item>hspa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hsupa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hsdpa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hspap:131072,262144,2441216,4096,16384,399360</item> |
| <item>edge:16384,32768,131072,4096,16384,65536</item> |
| <item>gprs:4096,8192,24576,4096,8192,24576</item> |
| <item>1xrtt:16384,32768,131070,4096,16384,102400</item> |
| <item>evdo:131072,262144,1048576,4096,16384,524288</item> |
| <item>lte:524288,1048576,8388608,262144,524288,4194304</item> |
| </string-array> |
| |
| <!-- Configure wifi tcp buffersizes in the form: |
| rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max --> |
| <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,4194304,262144,524288,1048576</string> |
| |
| <!-- Config determines whether to update phone object when voice registration |
| state changes. Voice radio tech change will always trigger an update of |
| phone object irrespective of this config --> |
| <bool name="config_switch_phone_on_voice_reg_state_change">false</bool> |
| |
| <!-- Values for GPS configuration --> |
| <string-array translatable="false" name="config_gpsParameters"> |
| <item>SUPL_HOST=supl.google.com</item> |
| <item>SUPL_PORT=7275</item> |
| <item>XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin</item> |
| <item>XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin</item> |
| <item>XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin</item> |
| <item>NTP_SERVER=north-america.pool.ntp.org</item> |
| <item>SUPL_MODE=1</item> |
| <item>SUPL_VER=0x20000</item> |
| <item>LPP_PROFILE=0</item> |
| <item>NMEA_PROVIDER=0</item> |
| <item>A_GLONASS_POS_PROTOCOL_SELECT=0</item> |
| <item>ERR_ESTIMATE=0</item> |
| <item>INTERMEDIATE_POS=0</item> |
| <item>SUPL_ES=0</item> |
| </string-array> |
| </resources> |
