| /**************************************************************************; | |
| ;* *; | |
| ;* *; | |
| ;* Intel Corporation - ACPI Reference Code for the Baytrail *; | |
| ;* Family of Customer Reference Boards. *; | |
| ;* *; | |
| ;* *; | |
| ;* Copyright (c) 2012 - 2014, Intel Corporation. All rights reserved *; | |
| ; | |
| ; This program and the accompanying materials are licensed and made available under | |
| ; the terms and conditions of the BSD License that accompanies this distribution. | |
| ; The full text of the license may be found at | |
| ; http://opensource.org/licenses/bsd-license.php. | |
| ; | |
| ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| ; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| ; | |
| ;* *; | |
| ;* *; | |
| ;**************************************************************************/ | |
| // Define the following External variables to prevent a WARNING when | |
| // using ASL.EXE and an ERROR when using IASL.EXE. | |
| External(PDC0) | |
| External(PDC1) | |
| External(PDC2) | |
| External(PDC3) | |
| External(CFGD) | |
| External(\_PR.CPU0._PPC, IntObj) | |
| External(\_SB.PCI0.LPCB.TPM.PTS, MethodObj) | |
| External(\_SB.STR3, DeviceObj) | |
| External(\_SB.I2C1.BATC, DeviceObj) | |
| External(\_SB.DPTF, DeviceObj) | |
| External(\_SB.TCHG, DeviceObj) | |
| External(\_SB.IAOE.PTSL) | |
| External(\_SB.IAOE.WKRS) | |
| // | |
| // Create a Global MUTEX. | |
| // | |
| Mutex(MUTX,0) | |
| // Port 80h Update: | |
| // Update 8 bits of the 32-bit Port 80h. | |
| // | |
| // Arguments: | |
| // Arg0: 0 = Write Port 80h, Bits 7:0 Only. | |
| // 1 = Write Port 80h, Bits 15:8 Only. | |
| // 2 = Write Port 80h, Bits 23:16 Only. | |
| // 3 = Write Port 80h, Bits 31:24 Only. | |
| // Arg1: 8-bit Value to write | |
| // | |
| // Return Value: | |
| // None | |
| Method(P8XH,2,Serialized) | |
| { | |
| If(LEqual(Arg0,0)) // Write Port 80h, Bits 7:0. | |
| { | |
| Store(Or(And(P80D,0xFFFFFF00),Arg1),P80D) | |
| } | |
| If(LEqual(Arg0,1)) // Write Port 80h, Bits 15:8. | |
| { | |
| Store(Or(And(P80D,0xFFFF00FF),ShiftLeft(Arg1,8)),P80D) | |
| } | |
| If(LEqual(Arg0,2)) // Write Port 80h, Bits 23:16. | |
| { | |
| Store(Or(And(P80D,0xFF00FFFF),ShiftLeft(Arg1,16)),P80D) | |
| } | |
| If(LEqual(Arg0,3)) // Write Port 80h, Bits 31:24. | |
| { | |
| Store(Or(And(P80D,0x00FFFFFF),ShiftLeft(Arg1,24)),P80D) | |
| } | |
| } | |
| // | |
| // Define SW SMI port as an ACPI Operating Region to use for generate SW SMI. | |
| // | |
| OperationRegion (SPRT, SystemIO, 0xB2, 2) | |
| Field (SPRT, ByteAcc, Lock, Preserve) | |
| { | |
| SSMP, 8 | |
| } | |
| // The _PIC Control Method is optional for ACPI design. It allows the | |
| // OS to inform the ASL code which interrupt controller is being used, | |
| // the 8259 or APIC. The reference code in this document will address | |
| // PCI IRQ Routing and resource allocation for both cases. | |
| // | |
| // The values passed into _PIC are: | |
| // 0 = 8259 | |
| // 1 = IOAPIC | |
| Method(\_PIC,1) | |
| { | |
| Store(Arg0,GPIC) | |
| Store(Arg0,PICM) | |
| } | |
| OperationRegion(SWC0, SystemIO, 0x610, 0x0F) | |
| Field(SWC0, ByteAcc, NoLock, Preserve) | |
| { | |
| G1S, 8, //SWC GPE1_STS | |
| Offset(0x4), | |
| G1E, 8, | |
| Offset(0xA), | |
| G1S2, 8, //SWC GPE1_STS_2 | |
| G1S3, 8 //SWC GPE1_STS_3 | |
| } | |
| OperationRegion (SWC1, SystemIO, \PMBS, 0x2C) | |
| Field(SWC1, DWordAcc, NoLock, Preserve) | |
| { | |
| Offset(0x20), | |
| G0S, 32, //GPE0_STS | |
| Offset(0x28), | |
| G0EN, 32 //GPE0_EN | |
| } | |
| // Prepare to Sleep. The hook is called when the OS is about to | |
| // enter a sleep state. The argument passed is the numeric value of | |
| // the Sx state. | |
| Method(_PTS,1) | |
| { | |
| Store(0,P80D) // Zero out the entire Port 80h DWord. | |
| P8XH(0,Arg0) // Output Sleep State to Port 80h, Byte 0. | |
| //clear the 3 SWC status bits | |
| Store(Ones, G1S3) | |
| Store(Ones, G1S2) | |
| Store(1, G1S) | |
| //set SWC GPE1_EN | |
| Store(1,G1E) | |
| //clear GPE0_STS | |
| Store(Ones, G0S) | |
| If(LEqual(Arg0,3)) // If S3 Suspend | |
| { | |
| // | |
| // Disable Digital Thermal Sensor function when doing S3 suspend | |
| // | |
| If(CondRefOf(DTSE)) | |
| { | |
| If(LGreaterEqual(DTSE, 0x01)) | |
| { | |
| Store(30, DTSF) // DISABLE_UPDATE_DTS_EVERY_SMI | |
| Store(0xD0, SSMP) // DTS SW SMI | |
| } | |
| } | |
| } | |
| } | |
| // Wake. This hook is called when the OS is about to wake from a | |
| // sleep state. The argument passed is the numeric value of the | |
| // sleep state the system is waking from. | |
| Method(_WAK,1,Serialized) | |
| { | |
| P8XH(1,0xAB) // Beginning of _WAK. | |
| Notify(\_SB.PWRB,0x02) | |
| If(NEXP) | |
| { | |
| // Reinitialize the Native PCI Express after resume | |
| If(And(OSCC,0x02)) | |
| { | |
| \_SB.PCI0.NHPG() | |
| } | |
| If(And(OSCC,0x04)) // PME control granted? | |
| { | |
| \_SB.PCI0.NPME() | |
| } | |
| } | |
| If(LOr(LEqual(Arg0,3), LEqual(Arg0,4))) // If S3 or S4 Resume | |
| { | |
| // If CMP is enabled, we may need to restore the C-State and/or | |
| // P-State configuration, as it may have been saved before the | |
| // configuration was finalized based on OS/driver support. | |
| // | |
| // CFGD[24] = Two or more cores enabled | |
| // | |
| If(And(CFGD,0x01000000)) | |
| { | |
| // | |
| // If CMP and the OSYS is WinXP SP1, we will enable C1-SMI if | |
| // C-States are enabled. | |
| // | |
| // CFGD[7:4] = C4, C3, C2, C1 Capable/Enabled | |
| // | |
| // | |
| } | |
| // Windows XP SP2 does not properly restore the P-State | |
| // upon resume from S4 or S3 with degrade modes enabled. | |
| // Use the existing _PPC methods to cycle the available | |
| // P-States such that the processor ends up running at | |
| // the proper P-State. | |
| // | |
| // Note: For S4, another possible W/A is to always boot | |
| // the system in LFM. | |
| // | |
| If(LEqual(OSYS,2002)) | |
| { | |
| If(And(CFGD,0x01)) | |
| { | |
| If(LGreater(\_PR.CPU0._PPC,0)) | |
| { | |
| Subtract(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC) | |
| PNOT() | |
| Add(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC) | |
| PNOT() | |
| } | |
| Else | |
| { | |
| Add(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC) | |
| PNOT() | |
| Subtract(\_PR.CPU0._PPC,1,\_PR.CPU0._PPC) | |
| PNOT() | |
| } | |
| } | |
| } | |
| } | |
| Return(Package() {0,0}) | |
| } | |
| // Power Notification: | |
| // Perform all needed OS notifications during a | |
| // Power Switch. | |
| // | |
| // Arguments: | |
| // None | |
| // | |
| // Return Value: | |
| // None | |
| Method(PNOT,0,Serialized) | |
| { | |
| // If MP enabled and driver support is present, notify all | |
| // processors. | |
| If(MPEN) | |
| { | |
| If(And(PDC0,0x0008)) | |
| { | |
| Notify(\_PR.CPU0,0x80) // Eval CPU0 _PPC. | |
| If(And(PDC0,0x0010)) | |
| { | |
| Sleep(100) | |
| Notify(\_PR.CPU0,0x81) // Eval _CST. | |
| } | |
| } | |
| If(And(PDC1,0x0008)) | |
| { | |
| Notify(\_PR.CPU1,0x80) // Eval CPU1 _PPC. | |
| If(And(PDC1,0x0010)) | |
| { | |
| Sleep(100) | |
| Notify(\_PR.CPU1,0x81) // Eval _CST. | |
| } | |
| } | |
| If(And(PDC2,0x0008)) | |
| { | |
| Notify(\_PR.CPU2,0x80) // Eval CPU2 _PPC. | |
| If(And(PDC2,0x0010)) | |
| { | |
| Sleep(100) | |
| Notify(\_PR.CPU2,0x81) // Eval _CST. | |
| } | |
| } | |
| If(And(PDC3,0x0008)) | |
| { | |
| Notify(\_PR.CPU3,0x80) // Eval CPU3 _PPC. | |
| If(And(PDC3,0x0010)) | |
| { | |
| Sleep(100) | |
| Notify(\_PR.CPU3,0x81) // Eval _CST. | |
| } | |
| } | |
| } | |
| Else | |
| { | |
| Notify(\_PR.CPU0,0x80) // Eval _PPC. | |
| Sleep(100) | |
| Notify(\_PR.CPU0,0x81) // Eval _CST | |
| } | |
| } | |
| // | |
| // System Bus | |
| // | |
| Scope(\_SB) | |
| { | |
| Name(CRTT, 110) // Processor critical temperature | |
| Name(ACTT, 77) // Active temperature limit for processor participant | |
| Name(GCR0, 70) // Critical temperature for Generic participant 0 in degree celsius | |
| Name(GCR1, 70) // Critical temperature for Generic participant 1 in degree celsius | |
| Name(GCR2, 70) // Critical temperature for Generic participant 2 in degree celsius | |
| Name(GCR3, 70) // Critical temperature for Generic participant 3 in degree celsius | |
| Name(GCR4, 70) // Critical temperature for Generic participant 4 in degree celsius | |
| Name(GCR5, 70) // Critical temperature for Generic participant 5 in degree celsius | |
| Name(GCR6, 70) // Critical temperature for Generic participant 6 in degree celsius | |
| Name(PST0, 60) // Passive temperature limit for Generic Participant 0 in degree celsius | |
| Name(PST1, 60) // Passive temperature limit for Generic Participant 1 in degree celsius | |
| Name(PST2, 60) // Passive temperature limit for Generic Participant 2 in degree celsius | |
| Name(PST3, 60) // Passive temperature limit for Generic Participant 3 in degree celsius | |
| Name(PST4, 60) // Passive temperature limit for Generic Participant 4 in degree celsius | |
| Name(PST5, 60) // Passive temperature limit for Generic Participant 5 in degree celsius | |
| Name(PST6, 60) // Passive temperature limit for Generic Participant 6 in degree celsius | |
| Name(LPMV, 3) | |
| Name(PDBG, 0) // DPTF Super debug option | |
| Name(PDPM, 1) // DPTF DPPM enable | |
| Name(PDBP, 1) // DPTF DBPT enable (dynamic battery protection technology) | |
| Name(DLPO, Package() | |
| { | |
| 0x1, // Revision | |
| 0x1, // LPO Enable | |
| 0x1, // LPO StartPState | |
| 25, // LPO StepSize | |
| 0x1, // | |
| 0x1, // | |
| }) | |
| Name(BRQD, 0x00) // This is used to determine if DPTF display participant requested Brightness level change | |
| // or it is from Graphics driver. Value of 1 is for DPTF else it is 0 | |
| Method(_INI,0) | |
| { | |
| // NVS has stale DTS data. Get and update the values | |
| // with current temperatures. Note that this will also | |
| // re-arm any AP Thermal Interrupts. | |
| // Read temperature settings from global NVS | |
| Store(DPCT, CRTT) | |
| Store(Subtract(DPPT, 8), ACTT) // Active Trip point = Passive trip point - 8 | |
| Store(DGC0, GCR0) | |
| Store(DGC0, GCR1) | |
| Store(DGC1, GCR2) | |
| Store(DGC1, GCR3) | |
| Store(DGC1, GCR4) | |
| Store(DGC2, GCR5) | |
| Store(DGC2, GCR6) | |
| Store(DGP0, PST0) | |
| Store(DGP0, PST1) | |
| Store(DGP1, PST2) | |
| Store(DGP1, PST3) | |
| Store(DGP1, PST4) | |
| Store(DGP2, PST5) | |
| Store(DGP2, PST6) | |
| // Read Current low power mode setting from global NVS | |
| Store(DLPM, LPMV) | |
| // Update DPTF Super Debug option | |
| Store(DDBG, PDBG) | |
| // Update DPTF LPO Options | |
| Store(LPOE, Index(DLPO,1)) | |
| Store(LPPS, Index(DLPO,2)) | |
| Store(LPST, Index(DLPO,3)) | |
| Store(LPPC, Index(DLPO,4)) | |
| Store(LPPF, Index(DLPO,5)) | |
| Store(DPME, PDPM) | |
| } | |
| // Define a (Control Method) Power Button. | |
| Device(PWRB) | |
| { | |
| Name(_HID,EISAID("PNP0C0C")) | |
| // GPI_SUS0 = GPE16 = Waketime SCI. The PRW isn't working when | |
| // placed in any of the logical locations ( PS2K, PS2M), | |
| // so a Power Button Device was created specifically | |
| // for the WAKETIME_SCI PRW. | |
| Name(_PRW, Package() {16,4}) | |
| } | |
| Device(SLPB) | |
| { | |
| Name(_HID, EISAID("PNP0C0E")) | |
| } // END SLPB | |
| Scope(PCI0) | |
| { | |
| Method(_INI,0) | |
| { | |
| // Determine the OS and store the value, where: | |
| // | |
| // OSYS = 2009 = Windows 7 and Windows Server 2008 R2. | |
| // OSYS = 2012 = Windows 8 and Windows Server 2012. | |
| // | |
| // Assume Windows 7 at a minimum. | |
| Store(2009,OSYS) | |
| // Check for a specific OS which supports _OSI. | |
| If(CondRefOf(\_OSI,Local0)) | |
| { | |
| // Linux returns _OSI = TRUE for numerous Windows | |
| // strings so that it is fully compatible with | |
| // BIOSes available in the market today. There are | |
| // currently 2 known exceptions to this model: | |
| // 1) Video Repost - Linux supports S3 without | |
| // requireing a Driver, meaning a Video | |
| // Repost will be required. | |
| // 2) On-Screen Branding - a full CMT Logo | |
| // is limited to the WIN2K and WINXP | |
| // Operating Systems only. | |
| // Use OSYS for Windows Compatibility. | |
| If(\_OSI("Windows 2009")) // Windows 7 or Windows Server 2008 R2 | |
| { | |
| Store(2009,OSYS) | |
| } | |
| If(\_OSI("Windows 2012")) // Windows 8 or Windows Server 2012 | |
| { | |
| Store(2012,OSYS) | |
| } | |
| If(\_OSI("Windows 2013")) //Windows Blue | |
| { | |
| Store(2013,OSYS) | |
| } | |
| // | |
| // If CMP is enabled, enable SMM C-State | |
| // coordination. SMM C-State coordination | |
| // will be disabled in _PDC if driver support | |
| // for independent C-States deeper than C1 | |
| // is indicated. | |
| } | |
| } | |
| Method(NHPG,0,Serialized) | |
| { | |
| } | |
| Method(NPME,0,Serialized) | |
| { | |
| } | |
| } // end Scope(PCI0) | |
| Device (GPED) //virtual GPIO device for ASL based AC/Battery/Expection notification | |
| { | |
| Name (_ADR, 0) | |
| Name (_HID, "INT0002") | |
| Name (_CID, "INT0002") | |
| Name (_DDN, "Virtual GPIO controller" ) | |
| Name (_UID, 1) | |
| Method (_CRS, 0x0, Serialized) | |
| { | |
| Name (RBUF, ResourceTemplate () | |
| { | |
| Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, ) {0x9} // Was 9 | |
| }) | |
| Return (RBUF) | |
| } | |
| Method (_STA, 0x0, NotSerialized) | |
| { | |
| Return(0x0) | |
| } | |
| Method (_AEI, 0x0, Serialized) | |
| { | |
| Name(RBUF, ResourceTemplate() | |
| { | |
| GpioInt(Edge, ActiveHigh, ExclusiveAndWake, PullDown,,"\\_SB.GPED",) {2} //pin 2 | |
| }) | |
| Return(RBUF) | |
| } | |
| Method(_E02) // _Exx method will be called when interrupt is raised | |
| { | |
| If (LEqual (PWBS, 1)) | |
| { | |
| Store (1, PWBS) //Clear PowerButton Status | |
| } | |
| If (LEqual (PMEB, 1)) | |
| { | |
| Store (1, PMEB) //Clear PME_B0_STS | |
| } | |
| If (LEqual (\_SB.PCI0.SATA.PMES, 1)) | |
| { | |
| Store (1, \_SB.PCI0.SATA.PMES) | |
| Notify (\_SB.PCI0.SATA, 0x02) | |
| } | |
| // | |
| // eMMC 4.41 | |
| // | |
| If (LAnd(LEqual (\_SB.PCI0.EM41.PMES, 1), LEqual(PCIM, 1))) | |
| { | |
| Store (1, \_SB.PCI0.EM41.PMES) | |
| Notify (\_SB.PCI0.EM41, 0x02) | |
| } | |
| // | |
| // eMMC 4.5 | |
| // | |
| If (LAnd(LEqual (\_SB.PCI0.EM45.PMES, 1), LEqual(PCIM, 1))) | |
| { | |
| Store (1, \_SB.PCI0.EM45.PMES) | |
| Notify (\_SB.PCI0.EM45, 0x02) | |
| } | |
| If (LEqual(HDAD, 0)) | |
| { | |
| If (LEqual (\_SB.PCI0.HDEF.PMES, 1)) | |
| { | |
| Store (1, \_SB.PCI0.HDEF.PMES) | |
| Notify (\_SB.PCI0.HDEF, 0x02) | |
| } | |
| } | |
| If (LEqual (\_SB.PCI0.EHC1.PMES, 1)) | |
| { | |
| Store (1, \_SB.PCI0.EHC1.PMES) | |
| Notify (\_SB.PCI0.EHC1, 0x02) | |
| } | |
| If (LEqual (\_SB.PCI0.XHC1.PMES, 1)) | |
| { | |
| Store (1, \_SB.PCI0.XHC1.PMES) | |
| Notify (\_SB.PCI0.XHC1, 0x02) | |
| } | |
| If (LEqual (\_SB.PCI0.SEC0.PMES, 1)) | |
| { | |
| Or (\_SB.PCI0.SEC0.PMES, Zero, \_SB.PCI0.SEC0.PMES) | |
| Notify (\_SB.PCI0.SEC0, 0x02) | |
| } | |
| } | |
| } // Device (GPED) | |
| //-------------------- | |
| // GPIO | |
| //-------------------- | |
| Device (GPO0) | |
| { | |
| Name (_ADR, 0) | |
| Name (_HID, "INT33FC") | |
| Name (_CID, "INT33B2") | |
| Name (_DDN, "ValleyView2 General Purpose Input/Output (GPIO) controller" ) | |
| Name (_UID, 1) | |
| Method (_CRS, 0x0, Serialized) | |
| { | |
| Name (RBUF, ResourceTemplate () | |
| { | |
| Memory32Fixed (ReadWrite, 0x0FED0C000, 0x00001000) | |
| Interrupt(ResourceConsumer, Level, ActiveLow, Shared, , , ) {49} | |
| }) | |
| Return (RBUF) | |
| } | |
| Method (_STA, 0x0, NotSerialized) | |
| { | |
| // | |
| // GPO driver will report present if any of below New IO bus exist | |
| // | |
| If (LOr(LEqual(L11D, 0), LEqual(L12D, 0))) // LPIO1 PWM #1 or #2 exist | |
| { Return(0xF) } | |
| If (LOr(LEqual(L13D, 0), LEqual(L14D, 0))) // LPIO1 HS-UART #1 or #2 exist | |
| { Return(0xF) } | |
| If (LOr(LEqual(L15D, 0), LEqual(SD1D, 0))) // LPIO1 SPI or SCC SDIO #1 exist | |
| { Return(0xF) } | |
| If (LOr(LEqual(SD2D, 0), LEqual(SD3D, 0))) // SCC SDIO #2 or #3 exist | |
| { Return(0xF) } | |
| If (LOr(LEqual(L21D, 0), LEqual(L22D, 0))) // LPIO2 I2C #1 or #2 exist | |
| { Return(0xF) } | |
| If (LOr(LEqual(L23D, 0), LEqual(L24D, 0))) // LPIO2 I2C #3 or #4 exist | |
| { Return(0xF) } | |
| If (LOr(LEqual(L25D, 0), LEqual(L26D, 0))) // LPIO2 I2C #5 or #6 exist | |
| { Return(0xF) } | |
| If (LEqual(L27D, 0)) // LPIO2 I2C #7 exist | |
| { Return(0xF) } | |
| Return(0x0) | |
| } | |
| // Track status of GPIO OpRegion availability for this controller | |
| Name(AVBL, 0) | |
| Method(_REG,2) | |
| { | |
| If (Lequal(Arg0, 8)) | |
| { | |
| Store(Arg1, ^AVBL) | |
| } | |
| } | |
| OperationRegion(GPOP, SystemIo, \GPBS, 0x50) | |
| Field(GPOP, ByteAcc, NoLock, Preserve) { | |
| Offset(0x28), // cfio_ioreg_SC_GP_LVL_63_32_ - [GPIO_BASE_ADDRESS] + 28h | |
| , 21, | |
| BTD3, 1, //This field is not used. Pin not defined in schematics. Closest is GPIO_S5_35 - COMBO_BT_WAKEUP | |
| Offset(0x48), // cfio_ioreg_SC_GP_LVL_95_64_ - [GPIO_BASE_ADDRESS] + 48h | |
| , 30, | |
| SHD3, 1 //GPIO_S0_SC_95 - SENS_HUB_RST_N | |
| } | |
| } // Device (GPO0) | |
| Device (GPO1) | |
| { | |
| Name (_ADR, 0) | |
| Name (_HID, "INT33FC") | |
| Name (_CID, "INT33B2") | |
| Name (_DDN, "ValleyView2 GPNCORE controller" ) | |
| Name (_UID, 2) | |
| Method (_CRS, 0x0, Serialized) | |
| { | |
| Name (RBUF, ResourceTemplate () | |
| { | |
| Memory32Fixed (ReadWrite, 0x0FED0D000, 0x00001000) | |
| Interrupt(ResourceConsumer, Level, ActiveLow, Shared, , , ) {48} | |
| }) | |
| Return (RBUF) | |
| } | |
| Method (_STA, 0x0, NotSerialized) | |
| { | |
| Return(\_SB.GPO0._STA) | |
| } | |
| } // Device (GPO1) | |
| Device (GPO2) | |
| { | |
| Name (_ADR, 0) | |
| Name (_HID, "INT33FC") | |
| Name (_CID, "INT33B2") | |
| Name (_DDN, "ValleyView2 GPSUS controller" ) | |
| Name (_UID, 3) | |
| Method (_CRS, 0x0, Serialized) | |
| { | |
| Name (RBUF, ResourceTemplate () | |
| { | |
| Memory32Fixed (ReadWrite, 0x0FED0E000, 0x00001000) | |
| Interrupt(ResourceConsumer, Level, ActiveLow, Shared, , , ) {50} | |
| }) | |
| Return (RBUF) | |
| } | |
| Method (_STA, 0x0, NotSerialized) | |
| { | |
| Return(^^GPO0._STA) | |
| } | |
| // Track status of GPIO OpRegion availability for this controller | |
| Name(AVBL, 0) | |
| Method(_REG,2) | |
| { | |
| If (Lequal(Arg0, 8)) | |
| { | |
| Store(Arg1, ^AVBL) | |
| } | |
| } | |
| //Manipulate GPIO line using GPIO operation regions. | |
| Name (GMOD, ResourceTemplate () //One method of creating a Connection for OpRegion accesses in Field definitions | |
| { | |
| //is creating a named object that refers to the connection attributes | |
| GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO2") {21} //sus 21+128 BT+WLAN_ENABLE | |
| }) | |
| OperationRegion(GPOP, SystemIo, \GPBS, 0x100) | |
| Field(GPOP, ByteAcc, NoLock, Preserve) { | |
| Offset(0x88), // cfio_ioreg_SUS_GP_LVL_31_0_ - [GPIO_BASE_ADDRESS] + 88h | |
| , 20, | |
| WFD3, 1 | |
| } | |
| } // Device (GPO2) | |
| include ("PchScc.asl") | |
| include ("PchLpss.asl") | |
| Scope(I2C7) | |
| { | |
| } //End Scope(I2C7) | |
| } // end Scope(\_SB) | |
| Name(PICM, 0) // Global Name, returns current Interrupt controller mode; updated from _PIC control method | |