blob: fd51c374eb32913268c9742cd441342a8f221b13 [file] [log] [blame]
<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2012, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- If this is true, the screen will fade off. -->
<bool name="config_animateScreenLights">false</bool>
<!-- Default color for notification LED is white. -->
<color name="config_defaultNotificationColor">#ffffffff</color>
<!-- Default LED on time for notification LED in milliseconds. -->
<integer name="config_defaultNotificationLedOn">1000</integer>
<!-- Default LED off time for notification LED in milliseconds. -->
<integer name="config_defaultNotificationLedOff">9000</integer>
<!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
autodetected from the Configuration. -->
<bool name="config_showNavigationBar">true</bool>
<!-- Flag indicating whether the we should enable the automatic brightness in Settings.
Software implementation will be used if config_hardware_auto_brightness_available is not set -->
<bool name="config_automatic_brightness_available">true</bool>
<!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
The N entries of this array define N 1 zones as follows:
Zone 0: 0 <= LUX < array[0]
Zone 1: array[0] <= LUX < array[1]
...
Zone N: array[N - 1] <= LUX < array[N]
Zone N + 1 array[N] <= LUX < infinity
Must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessLevels">
<item>10</item>
<item>50</item>
<item>100</item>
<item>200</item>
<item>400</item>
<item>500</item>
<item>800</item>
<item>1000</item>
<item>1600</item>
<item>3000</item>
<item>10000</item>
</integer-array>
<!-- Array of output values for LCD backlight corresponding to the LUX values
in the config_autoBrightnessLevels array. This array should have size one greater
than the size of the config_autoBrightnessLevels array.
This must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessLcdBacklightValues">
<item>14</item> <!-- 0-10 -->
<item>28</item> <!-- 10-50 -->
<item>37</item> <!-- 50-100 -->
<item>51</item> <!-- 100-200 -->
<item>71</item> <!-- 200-400 -->
<item>80</item> <!-- 400-500 -->
<item>96</item> <!-- 500-800 -->
<item>108</item> <!-- 800-1000 -->
<item>144</item> <!-- 1000-1600 -->
<item>181</item> <!-- 1600-3000 -->
<item>254</item> <!-- 3000-10000 -->
<item>255</item> <!-- 10000+ -->
</integer-array>
<!-- Array of output values for button backlight corresponding to the LUX values
in the config_autoBrightnessLevels array. This array should have size one greater
than the size of the config_autoBrightnessLevels array.
This must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessButtonBacklightValues">
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
<item>0</item>
</integer-array>
<!-- Minimum screen brightness allowed by the power manager. -->
<integer name="config_screenBrightnessDim">1</integer>
<!-- Default screen brightness setting.
Must be in the range specified by minimum and maximum. -->
<integer name="config_screenBrightnessSettingDefault">87</integer>
<!-- Minimum screen brightness setting allowed by the power manager.
The user is forbidden from setting the brightness below this level. -->
<integer name="config_screenBrightnessSettingMinimum">1</integer>
<!-- The duration (in milliseconds) that the radio will scan for a signal
when there's no network connection. If the scan doesn't timeout, use zero -->
<integer name="config_radioScanningTimeout">9000</integer>
<!-- List of regexpressions describing the interface (if any) that represent tetherable
USB interfaces. If the device doesn't want to support tething over USB this should
be empty. An example would be "usb.*" -->
<string-array translatable="false" name="config_tether_usb_regexs">
<item>"usb\\d"</item>
</string-array>
<!-- List of regexpressions describing the interface (if any) that represent tetherable
Wifi interfaces. If the device doesn't want to support tethering over Wifi this
should be empty. An example would be "softap.*" -->
<string-array translatable="false" name="config_tether_wifi_regexs">
<item>"wlan0"</item>
<item>"softap.*"</item>
</string-array>
<!-- List of regexpressions describing the interface (if any) that represent tetherable
bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this
should be empty. -->
<string-array translatable="false" name="config_tether_bluetooth_regexs">
<item>"bt-pan"</item>
</string-array>
<!-- Array of allowable ConnectivityManager network types for tethering -->
<!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
[0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
<integer-array translatable="false" name="config_tether_upstream_types">
<item>0</item>
<item>1</item>
<item>5</item>
<item>7</item>
</integer-array>
<!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
<bool name="config_unplugTurnsOnScreen">true</bool>
<!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
<bool translatable="false" name="config_wifi_dual_band_support">true</bool>
<!-- Boolean indicating whether the wifi chipset has background scan support -->
<bool translatable="false" name="config_wifi_background_scan_support">false</bool>
<!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
<bool name="config_intrusiveNotificationLed">true</bool>
<!-- This string array should be overridden by the device to present a list of network
attributes. This is used by the connectivity manager to decide which networks can coexist
based on the hardware -->
<!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
[associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] -->
<!-- the 5th element "resore-time" indicates the number of milliseconds to delay
before automatically restore the default connection. Set -1 if the connection
does not require auto-restore. -->
<!-- the 6th element indicates boot-time dependency-met value. -->
<string-array translatable="false" name="networkAttributes">
<item>"wifi,1,1,1,-1,true"</item>
<item>"mobile,0,0,0,-1,true"</item>
<item>"mobile_mms,2,0,2,60000,true"</item>
<item>"mobile_supl,3,0,2,60000,true"</item>
<item>"mobile_dun,4,0,2,60000,true"</item>
<item>"mobile_hipri,5,0,3,60000,true"</item>
<item>"mobile_fota,10,0,2,60000,true"</item>
<item>"mobile_ims,11,0,2,60000,true"</item>
<item>"mobile_cbs,12,0,2,60000,true"</item>
<item>"wifi_p2p,13,1,0,-1,true"</item>
<item>"bluetooth,7,7,2,-1,true"</item>
</string-array>
<!-- This string array should be overridden by the device to present a list of radio
attributes. This is used by the connectivity manager to decide which networks can coexist
based on the hardware -->
<!-- An Array of "[ConnectivityManager connectionType],
[# simultaneous connection types]" -->
<string-array translatable="false" name="radioAttributes">
<item>"1,1"</item>
<item>"0,1"</item>
<item>"7,1"</item>
</string-array>
<!-- Vibrator pattern for feedback about a long screen/key press -->
<integer-array name="config_longPressVibePattern">
<item>0</item>
<item>7</item>
<item>10</item>
</integer-array>
<!-- Vibrator pattern for feedback about touching a virtual key -->
<integer-array name="config_virtualKeyVibePattern">
<item>7</item>
</integer-array>
<!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
<integer-array name="config_keyboardTapVibePattern">
<item>5</item>
</integer-array>
<!-- Boolean indicating if restoring network selection should be skipped -->
<!-- The restoring is handled by modem if it is true -->
<bool translatable="false" name="skip_restoring_network_selection">true</bool>
<!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
<bool name="config_cellBroadcastAppLinks">true</bool>
<!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
<integer name="config_shutdownBatteryTemperature">600</integer>
<bool name="config_ui_enableFadingMarquee">false</bool>
<string-array name="config_usbHostBlacklist">
<!-- /dev/bus/usb/001 is used for the modem -->
<item>/dev/bus/usb/001</item>
</string-array>
<!-- reference volume index for music stream to limit headphone volume and display warning -->
<integer name="config_safe_media_volume_index">7</integer>
<bool name="config_enableWifiDisplay">true</bool>
<!-- Minimum span needed to begin a touch scaling gesture.
If the span is equal to or greater than this size, a scaling gesture
will begin, where supported. (See android.view.ScaleGestureDetector)
This value has been tuned for the "mako" device. -->
<dimen name="config_minScalingSpan">35mm</dimen>
<!-- Setting this true forces the headset jack switches to use the/dev/input/event subsystem
rather than the uevent framework. -->
<bool name="config_useDevInputEventForAudioJack">true</bool>
<!-- Component name of the default wallpaper. This will be ImageWallpaper if not specified -->
<string name="default_wallpaper_component" translatable="false">com.android.phasebeam/.PhaseBeamWallpaper</string>
<!-- The default iface on which to monitor data use -->
<string name="config_datause_iface" translatable="false">rmnet_usb0</string>
</resources>