| # |
| # Copyright (C) 2015 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # This file includes all definitions that apply to ALL angler devices, and |
| # are also specific to angler devices |
| # |
| # Everything in this directory will become public |
| |
| |
| ifeq ($(TARGET_PREBUILT_KERNEL),) |
| LOCAL_KERNEL := device/huawei/angler-kernel/Image.gz-dtb |
| else |
| LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL) |
| endif |
| |
| PRODUCT_COPY_FILES := \ |
| $(LOCAL_KERNEL):kernel |
| |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/init.angler.rc:root/init.angler.rc \ |
| device/huawei/angler/init.angler.sensorhub.rc:root/init.angler.sensorhub.rc \ |
| device/huawei/angler/init.angler.usb.rc:root/init.angler.usb.rc \ |
| device/huawei/angler/fstab.angler:root/fstab.angler \ |
| device/huawei/angler/ueventd.angler.rc:root/ueventd.angler.rc \ |
| device/huawei/angler/init.angler.power.sh:system/bin/init.angler.power.sh |
| |
| |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/init.mcfg.sh:system/bin/init.mcfg.sh |
| |
| # Thermal configuration |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/thermal-engine-angler.conf:system/etc/thermal-engine.conf |
| |
| # Media |
| PRODUCT_COPY_FILES += \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \ |
| device/huawei/angler/media_codecs.xml:system/etc/media_codecs.xml \ |
| device/huawei/angler/media_codecs_performance.xml:system/etc/media_codecs_performance.xml \ |
| device/huawei/angler/media_profiles.xml:system/etc/media_profiles.xml |
| |
| # Audio |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/audio_output_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_output_policy.conf \ |
| device/huawei/angler/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \ |
| device/huawei/angler/mixer_paths.xml:system/etc/mixer_paths.xml \ |
| device/huawei/angler/audio_platform_info_i2s.xml:system/etc/audio_platform_info_i2s.xml \ |
| device/huawei/angler/sound_trigger_mixer_paths.xml:system/etc/sound_trigger_mixer_paths.xml \ |
| device/huawei/angler/sound_trigger_platform_info.xml:system/etc/sound_trigger_platform_info.xml \ |
| device/huawei/angler/audio_policy.conf:system/etc/audio_policy.conf \ |
| device/huawei/angler/audio_platform_info.xml:system/etc/audio_platform_info.xml \ |
| |
| # Input device files |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/gpio-keys.kl:system/usr/keylayout/gpio-keys.kl \ |
| device/huawei/angler/qpnp_pon.kl:system/usr/keylayout/qpnp_pon.kl \ |
| device/huawei/angler/synaptics_dsx.idc:system/usr/idc/synaptics_dsx.idc |
| |
| # for launcher layout |
| PRODUCT_PACKAGES += \ |
| AnglerLayout |
| |
| # Delegation for OEM customization |
| PRODUCT_OEM_PROPERTIES := \ |
| ro.config.ringtone \ |
| ro.config.notification_sound \ |
| ro.config.alarm_alert \ |
| ro.config.wallpaper \ |
| ro.config.wallpaper_component \ |
| ro.oem.* \ |
| oem.* |
| |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/sec_config:system/etc/sec_config |
| |
| # Wifi |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/bcmdhd.cal:system/etc/wifi/bcmdhd.cal \ |
| device/huawei/angler/bcmdhd-pme.cal:system/etc/wifi/bcmdhd-pme.cal \ |
| device/huawei/angler/bcmdhd-high.cal:system/etc/wifi/bcmdhd-high.cal \ |
| device/huawei/angler/bcmdhd-low.cal:system/etc/wifi/bcmdhd-low.cal |
| |
| # These are the hardware-specific features |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml \ |
| frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \ |
| frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ |
| frameworks/native/data/etc/android.hardware.camera.full.xml:system/etc/permissions/android.hardware.camera.full.xml \ |
| frameworks/native/data/etc/android.hardware.camera.raw.xml:system/etc/permissions/android.hardware.camera.raw.xml \ |
| frameworks/native/data/etc/android.hardware.fingerprint.xml:system/etc/permissions/android.hardware.fingerprint.xml \ |
| frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:system/etc/permissions/android.hardware.sensor.stepcounter.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:system/etc/permissions/android.hardware.sensor.stepdetector.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:system/etc/permissions/android.hardware.sensor.hifi_sensors.xml \ |
| frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ |
| frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \ |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \ |
| frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \ |
| frameworks/native/data/etc/android.hardware.audio.low_latency.xml:system/etc/permissions/android.hardware.audio.low_latency.xml \ |
| frameworks/native/data/etc/android.hardware.audio.pro.xml:system/etc/permissions/android.hardware.audio.pro.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.cdma.xml:system/etc/permissions/android.hardware.telephony.cdma.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:system/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \ |
| frameworks/native/data/etc/android.software.midi.xml:system/etc/permissions/android.software.midi.xml \ |
| frameworks/native/data/etc/android.software.verified_boot.xml:system/etc/permissions/android.software.verified_boot.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:system/etc/permissions/com.nxp.mifare.xml |
| |
| |
| # MSM IRQ Balancer configuration file |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/msm_irqbalance.conf:system/etc/msm_irqbalance.conf |
| |
| PRODUCT_TAGS += dalvik.gc.type-precise |
| |
| # This device is 560dpi. However the platform doesn't |
| # currently contain all of the bitmaps at 560dpi density so |
| # we do this little trick to fall back to the xxhdpi version |
| # if the 560dpi doesn't exist. |
| PRODUCT_AAPT_CONFIG := normal |
| PRODUCT_AAPT_PREF_CONFIG := 560dpi |
| # A list of dpis to select prebuilt apk, in precedence order. |
| PRODUCT_AAPT_PREBUILT_DPI := xxxhdpi xxhdpi xhdpi hdpi |
| |
| PRODUCT_CHARACTERISTICS := nosdcard |
| |
| PRODUCT_PACKAGES += \ |
| gralloc.msm8994 \ |
| hwcomposer.msm8994 \ |
| libgenlock \ |
| memtrack.msm8994 \ |
| lights.angler |
| |
| PRODUCT_PACKAGES += \ |
| audio.primary.msm8994 \ |
| audio.a2dp.default \ |
| audio.usb.default \ |
| audio.r_submix.default \ |
| libaudio-resampler \ |
| dsm_ctrl |
| |
| # Audio effects |
| PRODUCT_PACKAGES += \ |
| libqcomvisualizer \ |
| libqcomvoiceprocessing \ |
| libqcomvoiceprocessingdescriptors \ |
| libqcompostprocbundle |
| |
| PRODUCT_PACKAGES += \ |
| libc2dcolorconvert \ |
| libstagefrighthw \ |
| libOmxCore \ |
| libmm-omxcore \ |
| libOmxVdec \ |
| libOmxVdecHevc \ |
| libOmxVenc |
| |
| #CAMERA |
| PRODUCT_PACKAGES += \ |
| camera.msm8994 \ |
| libcamera \ |
| libmmcamera_interface \ |
| libmmcamera_interface2 \ |
| libmmjpeg_interface \ |
| libqomx_core \ |
| mm-qcamera-app |
| |
| # Sensor & activity_recognition HAL |
| PRODUCT_PACKAGES += \ |
| sensors.angler \ |
| activity_recognition.angler \ |
| sensortool.angler \ |
| nano4x1.bin |
| |
| # for off charging mode |
| PRODUCT_PACKAGES += \ |
| charger_res_images |
| |
| PRODUCT_PACKAGES += \ |
| libwpa_client \ |
| hostapd \ |
| dhcpcd.conf \ |
| wlutil \ |
| wpa_supplicant \ |
| wpa_supplicant.conf |
| |
| # NFC |
| PRODUCT_PACKAGES += \ |
| libnfc-nci \ |
| nfc_nci.angler \ |
| NfcNci \ |
| Tag |
| |
| # Power HAL |
| PRODUCT_PACKAGES += \ |
| power.angler |
| |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/nfc/libnfc-brcm.conf:system/etc/libnfc-brcm.conf \ |
| device/huawei/angler/nfc/libnfc-nxp.conf:system/etc/libnfc-nxp.conf |
| |
| DEVICE_PACKAGE_OVERLAYS := \ |
| device/huawei/angler/overlay |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.opengles.version=196609 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.sf.lcd_density=560 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.hwc.mdpcomp.enable=true \ |
| persist.data.mode=concurrent |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.radio.data_no_toggle=1 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.radio.data_con_rprt=true |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.hwui.texture_cache_size=72 \ |
| ro.hwui.layer_cache_size=48 \ |
| ro.hwui.r_buffer_cache_size=8 \ |
| ro.hwui.path_cache_size=32 \ |
| ro.hwui.gradient_cache_size=1 \ |
| ro.hwui.drop_shadow_cache_size=6 \ |
| ro.hwui.texture_cache_flushrate=0.4 \ |
| ro.hwui.text_small_cache_width=1024 \ |
| ro.hwui.text_small_cache_height=1024 \ |
| ro.hwui.text_large_cache_width=2048 \ |
| ro.hwui.text_large_cache_height=1024 |
| |
| # Enable low power video mode for 4K encode |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vidc.debug.perf.mode=2 \ |
| vidc.enc.dcvs.extra-buff-count=2 |
| |
| # for perfd |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.min_freq_0=384000 |
| ro.min_freq_4=384000 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.extension_library=libqti-perfd-client.so |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| rild.libpath=/system/vendor/lib64/libril-qc-qmi-1.so |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.telephony.default_cdma_sub=0 |
| |
| # LTE, CDMA, GSM/WCDMA |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.telephony.default_network=10 \ |
| telephony.lteOnCdmaDevice=1 \ |
| persist.radio.mode_pref_nv10=1 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.radio.apm_sim_not_pwdn=1 |
| |
| # Setup custom emergency number list based on the MCC. This is needed by RIL |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.radio.custom_ecc=1 |
| |
| # Enable Wifi calling |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.data.iwlan.enable=true |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.frp.pst=/dev/block/platform/soc.0/f9824900.sdhci/by-name/frp |
| |
| # For SPN display |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/spn-conf.xml:system/etc/spn-conf.xml |
| |
| # Request modem to send PLMN name always irrespective |
| # of display condition in EFSPN. |
| # RIL uses this property. |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.radio.always_send_plmn=true |
| |
| # If data_no_toggle is 0 there are no reports if the screen is off. |
| # If data_no_toggle is 1 then dormancy indications will come with screen off. |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.radio.data_no_toggle=1 |
| |
| # Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.telephony.call_ring.multiple=0 |
| |
| # Update 1x signal strength after 2s |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| persist.radio.snapshot_enabled=1 \ |
| persist.radio.snapshot_timer=2 |
| |
| # Reduce client buffer size for fast audio output tracks |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| af.fast_track_multiplier=1 |
| |
| # Low latency audio buffer size in frames |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| audio_hal.period_size=192 |
| |
| #for qcom modify fluence type name, here added and enable |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.qc.sdk.audio.fluencetype="fluence" \ |
| persist.audio.fluence.voicecall=true \ |
| persist.audio.fluence.voicecomm=true \ |
| persist.audio.product.identify="angler" \ |
| persist.audio.fluence.speaker=true |
| |
| # Enable AAC 5.1 output |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| media.aac_51_output_enabled=true |
| |
| #stereo speakers: orientation changes swap L/R channels |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.audio.monitorRotation=true |
| |
| # low audio flinger standby delay to reduce power consumption |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.audio.flinger_standbytime_ms=300 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.sys.ssr.restart_level="ALL_ENABLE" |
| |
| # Enable camera EIS |
| # eis.enable: enables electronic image stabilization |
| # is_type: sets image stabilization type |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.eis.enable=1 \ |
| persist.camera.is_type=4 |
| |
| # For android_filesystem_config.h |
| PRODUCT_PACKAGES += \ |
| fs_config_files |
| |
| # For data |
| PRODUCT_PACKAGES += \ |
| librmnetctl |
| |
| # limit dex2oat threads to improve thermals |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| dalvik.vm.boot-dex2oat-threads=4 \ |
| dalvik.vm.dex2oat-threads=2 \ |
| dalvik.vm.image-dex2oat-threads=4 |
| |
| # Modem debugger |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PACKAGES += \ |
| QXDMLogger |
| |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/init.angler.diag.rc.userdebug:root/init.angler.diag.rc |
| |
| # subsystem ramdump collection |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.sys.ssr.enable_ramdumps=1 |
| else |
| PRODUCT_COPY_FILES += \ |
| device/huawei/angler/init.angler.diag.rc.user:root/init.angler.diag.rc |
| endif |
| |
| # Incoming number (b/23529711) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.radio.redir_party_num=0 |
| |
| # setup dalvik vm configs. |
| $(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk) |
| |
| $(call inherit-product-if-exists, hardware/qcom/msm8994/msm8994.mk) |
| $(call inherit-product-if-exists, vendor/qcom/gpu/msm8994/msm8994-gpu-vendor.mk) |
| |
| # copy wlan firmware |
| $(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4358/device-bcm.mk) |
| |
| # setup dm-verity configs. |
| PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/system |
| PRODUCT_VENDOR_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor |
| $(call inherit-product, build/target/product/verity.mk) |