#
# Copyright (C) 2015 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This file includes all definitions that apply to ALL angler devices, and
# are also specific to angler devices
#
# Everything in this directory will become public

# Enable support for chinook sensorhub
TARGET_USES_CHINOOK_SENSORHUB := false

ifeq ($(TARGET_PREBUILT_KERNEL),)
    LOCAL_KERNEL := device/huawei/angler-kernel/Image.gz-dtb
else
  LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif

PRODUCT_COPY_FILES := \
    $(LOCAL_KERNEL):kernel

PRODUCT_COPY_FILES += \
    device/huawei/angler/init.angler.rc:root/init.angler.rc \
    device/huawei/angler/init.angler.usb.rc:root/init.angler.usb.rc \
    device/huawei/angler/fstab.angler:root/fstab.angler \
    device/huawei/angler/ueventd.angler.rc:root/ueventd.angler.rc \
    device/huawei/angler/init.angler.power.sh:system/bin/init.angler.power.sh \
    device/huawei/angler/uinput-fpc.kl:system/usr/keylayout/uinput-fpc.kl

ifeq ($(TARGET_USES_CHINOOK_SENSORHUB),true)
PRODUCT_COPY_FILES += \
    device/huawei/angler/init.angler.sensorhub.rc:root/init.angler.sensorhub.rc
else
PRODUCT_COPY_FILES += \
    device/huawei/angler/init.angler.nanohub.rc:root/init.angler.sensorhub.rc
endif

PRODUCT_COPY_FILES += \
    device/huawei/angler/init.mcfg.sh:system/bin/init.mcfg.sh

# Thermal configuration
PRODUCT_COPY_FILES += \
    device/huawei/angler/thermal-engine-angler.conf:system/etc/thermal-engine.conf

# Media
PRODUCT_COPY_FILES += \
    frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
    frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
    frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
    device/huawei/angler/media_codecs.xml:system/etc/media_codecs.xml \
    device/huawei/angler/media_codecs_performance.xml:system/etc/media_codecs_performance.xml \
    device/huawei/angler/media_profiles.xml:system/etc/media_profiles.xml

# Audio
PRODUCT_COPY_FILES += \
    device/huawei/angler/audio_output_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_output_policy.conf \
    device/huawei/angler/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \
    device/huawei/angler/mixer_paths.xml:system/etc/mixer_paths.xml \
    device/huawei/angler/audio_platform_info_i2s.xml:system/etc/audio_platform_info_i2s.xml \
    device/huawei/angler/sound_trigger_mixer_paths.xml:system/etc/sound_trigger_mixer_paths.xml \
    device/huawei/angler/sound_trigger_platform_info.xml:system/etc/sound_trigger_platform_info.xml \
    device/huawei/angler/audio_platform_info.xml:system/etc/audio_platform_info.xml \
    device/huawei/angler/audio_policy_configuration.xml:system/etc/audio_policy_configuration.xml \
    device/huawei/angler/audio_policy_volumes_drc.xml:system/etc/audio_policy_volumes_drc.xml \
    frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:system/etc/a2dp_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:system/etc/usb_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \

# Input device files
PRODUCT_COPY_FILES += \
    device/huawei/angler/gpio-keys.kl:system/usr/keylayout/gpio-keys.kl \
    device/huawei/angler/qpnp_pon.kl:system/usr/keylayout/qpnp_pon.kl \
    device/huawei/angler/synaptics_dsx.idc:system/usr/idc/synaptics_dsx.idc

# for launcher layout
PRODUCT_PACKAGES += \
    AnglerLayout

# include fingerprintd
PRODUCT_PACKAGES += \
    fingerprintd

# Delegation for OEM customization
PRODUCT_OEM_PROPERTIES := \
    ro.config.ringtone \
    ro.config.notification_sound \
    ro.config.alarm_alert \
    ro.config.wallpaper \
    ro.config.wallpaper_component \
    ro.oem.* \
    oem.*

PRODUCT_COPY_FILES += \
    device/huawei/angler/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config

# Wifi
PRODUCT_COPY_FILES += \
    device/huawei/angler/bcmdhd.cal:system/etc/wifi/bcmdhd.cal \
    device/huawei/angler/bcmdhd-pme.cal:system/etc/wifi/bcmdhd-pme.cal \
    device/huawei/angler/bcmdhd-high.cal:system/etc/wifi/bcmdhd-high.cal \
    device/huawei/angler/bcmdhd-low.cal:system/etc/wifi/bcmdhd-low.cal

# These are the hardware-specific features
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
    frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml \
    frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
    frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
    frameworks/native/data/etc/android.hardware.camera.full.xml:system/etc/permissions/android.hardware.camera.full.xml \
    frameworks/native/data/etc/android.hardware.camera.raw.xml:system/etc/permissions/android.hardware.camera.raw.xml \
    frameworks/native/data/etc/android.hardware.fingerprint.xml:system/etc/permissions/android.hardware.fingerprint.xml \
    frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
    frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
    frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \
    frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
    frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
    frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
    frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:system/etc/permissions/android.hardware.sensor.stepcounter.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:system/etc/permissions/android.hardware.sensor.stepdetector.xml \
    frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:system/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
    frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
    frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
    frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
    frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \
    frameworks/native/data/etc/android.hardware.audio.low_latency.xml:system/etc/permissions/android.hardware.audio.low_latency.xml \
    frameworks/native/data/etc/android.hardware.audio.pro.xml:system/etc/permissions/android.hardware.audio.pro.xml \
    frameworks/native/data/etc/android.hardware.telephony.cdma.xml:system/etc/permissions/android.hardware.telephony.cdma.xml \
    frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
    frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
    frameworks/native/data/etc/android.hardware.nfc.hce.xml:system/etc/permissions/android.hardware.nfc.hce.xml \
    frameworks/native/data/etc/android.hardware.nfc.hcef.xml:system/etc/permissions/android.hardware.nfc.hcef.xml \
    frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \
    frameworks/native/data/etc/android.software.midi.xml:system/etc/permissions/android.software.midi.xml \
    frameworks/native/data/etc/android.software.verified_boot.xml:system/etc/permissions/android.software.verified_boot.xml \
    frameworks/native/data/etc/com.nxp.mifare.xml:system/etc/permissions/com.nxp.mifare.xml \
    frameworks/native/data/etc/android.hardware.opengles.aep.xml:system/etc/permissions/android.hardware.opengles.aep.xml \
    frameworks/native/data/etc/android.hardware.vr.high_performance.xml:system/etc/permissions/android.hardware.vr.high_performance.xml \
    frameworks/native/data/etc/android.hardware.vulkan.level-0.xml:system/etc/permissions/android.hardware.vulkan.level.xml \
    frameworks/native/data/etc/android.hardware.vulkan.version-1_0_3.xml:system/etc/permissions/android.hardware.vulkan.version.xml


# MSM IRQ Balancer configuration file
PRODUCT_COPY_FILES += \
    device/huawei/angler/msm_irqbalance.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance.conf

# Qseecomd configuration file
PRODUCT_COPY_FILES += \
    device/huawei/angler/init.angler.qseecomd.sh:system/bin/init.angler.qseecomd.sh

PRODUCT_TAGS += dalvik.gc.type-precise

# This device is 560dpi.  However the platform doesn't
# currently contain all of the bitmaps at 560dpi density so
# we do this little trick to fall back to the xxhdpi version
# if the 560dpi doesn't exist.
PRODUCT_AAPT_CONFIG := normal
PRODUCT_AAPT_PREF_CONFIG := 560dpi
# A list of dpis to select prebuilt apk, in precedence order.
PRODUCT_AAPT_PREBUILT_DPI := xxxhdpi xxhdpi xhdpi hdpi

PRODUCT_CHARACTERISTICS := nosdcard

PRODUCT_PACKAGES += \
    gralloc.msm8994 \
    hwcomposer.msm8994 \
    libgenlock \
    memtrack.msm8994 \
    lights.angler

USE_XML_AUDIO_POLICY_CONF := 1
PRODUCT_PACKAGES += \
    audio.primary.msm8994 \
    audio.a2dp.default \
    audio.usb.default \
    audio.r_submix.default \
    libaudio-resampler \
    dsm_ctrl

ifeq ($(ENABLE_TREBLE), true)
PRODUCT_PACKAGES += \
    android.hardware.audio@2.0-service
endif

PRODUCT_PACKAGES += \
    android.hardware.soundtrigger@2.0-impl

# TODO(b/31817599) remove when angler_treble goes away
ifeq ($(TARGET_PRODUCT), angler_treble)
PRODUCT_PACKAGES += \
    android.hardware.audio@2.0-service
endif

# Audio effects
PRODUCT_PACKAGES += \
    libqcomvisualizer \
    libqcomvoiceprocessing \
    libqcomvoiceprocessingdescriptors \
    libqcompostprocbundle

PRODUCT_PACKAGES += \
    libc2dcolorconvert \
    libstagefrighthw \
    libOmxCore \
    libmm-omxcore \
    libOmxVdec \
    libOmxVdecHevc \
    libOmxVenc

#CAMERA
PRODUCT_PACKAGES += \
    camera.msm8994 \
    libcamera \
    libmmcamera_interface \
    libmmcamera_interface2 \
    libmmjpeg_interface \
    libqomx_core \
    mm-qcamera-app

# GPS
PRODUCT_PACKAGES += \
    libgps.utils \
    gps.msm8994

# Sensor & activity_recognition HAL
TARGET_USES_NANOHUB_SENSORHAL := true
NANOHUB_SENSORHAL_LID_STATE_ENABLED := true
NANOHUB_SENSORHAL_USB_MAG_BIAS_ENABLED := true
NANOHUB_SENSORHAL_SENSORLIST := $(LOCAL_PATH)/sensorhal/sensorlist.cpp

PRODUCT_PACKAGES += \
    sensors.angler \
    activity_recognition.angler \
    context_hub.default

ifeq ($(TARGET_USES_CHINOOK_SENSORHUB),true)
PRODUCT_PACKAGES += \
    sensortool.angler \
    nano4x1.bin
else
PRODUCT_PACKAGES += \
    nanoapp_cmd
endif

# sensor utilities (only for userdebug and eng builds)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
    nanotool \
    sensortest
endif

# for off charging mode
PRODUCT_PACKAGES += \
    charger_res_images

PRODUCT_PACKAGES += \
    android.hardware.wifi@1.0-service \
    libwpa_client \
    hostapd \
    wlutil \
    wificond \
    wifilogd \
    wpa_supplicant \
    wpa_supplicant.conf

# NFC
PRODUCT_PACKAGES += \
    libnfc-nci \
    nfc_nci.angler \
    NfcNci \
    Tag \
    android.hardware.nfc@1.0-impl \

ifeq ($(ENABLE_TREBLE), true)
PRODUCT_PACKAGES += \
    android.hardware.nfc@1.0-service
endif

# Power HAL
PRODUCT_PACKAGES += \
    power.angler \
    thermal.angler

# Test HAL for hwbinder performance benchamrk  (only for userdebug and eng builds)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
    android.hardware.tests.libhwbinder@1.0-impl
endif

PRODUCT_COPY_FILES += \
    device/huawei/angler/nfc/libnfc-brcm.conf:system/etc/libnfc-brcm.conf \
    device/huawei/angler/nfc/libnfc-nxp.conf:system/etc/libnfc-nxp.conf

DEVICE_PACKAGE_OVERLAYS := \
    device/huawei/angler/overlay

PRODUCT_PROPERTY_OVERRIDES += \
    ro.opengles.version=196610

PRODUCT_PROPERTY_OVERRIDES += \
    ro.sf.lcd_density=560

PRODUCT_PROPERTY_OVERRIDES += \
    persist.hwc.mdpcomp.enable=true \
    persist.data.mode=concurrent

PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.data_no_toggle=1

PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.data_con_rprt=true

PRODUCT_PROPERTY_OVERRIDES += \
    ro.hwui.texture_cache_size=72 \
    ro.hwui.layer_cache_size=48 \
    ro.hwui.r_buffer_cache_size=8 \
    ro.hwui.path_cache_size=32 \
    ro.hwui.gradient_cache_size=1 \
    ro.hwui.drop_shadow_cache_size=6 \
    ro.hwui.texture_cache_flushrate=0.4 \
    ro.hwui.text_small_cache_width=1024 \
    ro.hwui.text_small_cache_height=1024 \
    ro.hwui.text_large_cache_width=2048 \
    ro.hwui.text_large_cache_height=1024

# VR HAL
PRODUCT_PACKAGES += \
    vr.angler

# Enable low power video mode for 4K encode
PRODUCT_PROPERTY_OVERRIDES += \
    vidc.debug.perf.mode=2 \
    vidc.enc.dcvs.extra-buff-count=2

# for perfd
PRODUCT_PROPERTY_OVERRIDES += \
    ro.min_freq_0=384000
    ro.min_freq_4=384000

PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.extension_library=libqti-perfd-client.so

PRODUCT_PROPERTY_OVERRIDES += \
    rild.libpath=/vendor/lib64/libril-qc-qmi-1.so

PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.default_cdma_sub=0

# LTE, CDMA, GSM/WCDMA
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.default_network=10 \
    telephony.lteOnCdmaDevice=1 \
    persist.radio.mode_pref_nv10=1

PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.apm_sim_not_pwdn=1

# Setup custom emergency number list based on the MCC. This is needed by RIL
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.custom_ecc=1

# Enable Wifi calling
PRODUCT_PROPERTY_OVERRIDES += \
    persist.data.iwlan.enable=true

PRODUCT_PROPERTY_OVERRIDES += \
   ro.frp.pst=/dev/block/platform/soc.0/f9824900.sdhci/by-name/frp

# For SPN display
PRODUCT_COPY_FILES += \
    device/huawei/angler/spn-conf.xml:system/etc/spn-conf.xml

# Request modem to send PLMN name always irrespective
# of display condition in EFSPN.
# RIL uses this property.
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.always_send_plmn=true

# If data_no_toggle is 0 there are no reports if the screen is off.
# If data_no_toggle is 1 then dormancy indications will come with screen off.
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.data_no_toggle=1

# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.call_ring.multiple=0

# Update 1x signal strength after 2s
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    persist.radio.snapshot_enabled=1 \
    persist.radio.snapshot_timer=2

# Reduce client buffer size for fast audio output tracks
PRODUCT_PROPERTY_OVERRIDES += \
    af.fast_track_multiplier=1

# Low latency audio buffer size in frames
PRODUCT_PROPERTY_OVERRIDES += \
    audio_hal.period_size=192

#for qcom modify fluence type name, here added and enable
PRODUCT_PROPERTY_OVERRIDES += \
    ro.qc.sdk.audio.fluencetype="fluence" \
    persist.audio.fluence.voicecall=true \
    persist.audio.fluence.voicecomm=true \
    persist.audio.product.identify="angler" \
    persist.audio.fluence.speaker=true

# Enable AAC 5.1 output
PRODUCT_PROPERTY_OVERRIDES += \
    media.aac_51_output_enabled=true

#stereo speakers: orientation changes swap L/R channels
PRODUCT_PROPERTY_OVERRIDES += \
    ro.audio.monitorRotation=true

# low audio flinger standby delay to reduce power consumption
PRODUCT_PROPERTY_OVERRIDES += \
    ro.audio.flinger_standbytime_ms=300

PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.ssr.restart_level="ALL_ENABLE"

# Enable camera EIS
# eis.enable: enables electronic image stabilization
# is_type: sets image stabilization type
PRODUCT_PROPERTY_OVERRIDES += \
    persist.camera.eis.enable=1 \
    persist.camera.is_type=4

# For android_filesystem_config.h
PRODUCT_PACKAGES += \
   fs_config_files

# For data
PRODUCT_PACKAGES += \
   librmnetctl

# limit dex2oat threads to improve thermals
PRODUCT_PROPERTY_OVERRIDES += \
    dalvik.vm.boot-dex2oat-threads=4 \
    dalvik.vm.dex2oat-threads=4 \
    dalvik.vm.image-dex2oat-threads=4

# Modem debugger
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
ifeq (,$(filter aosp_angler, $(TARGET_PRODUCT)))
PRODUCT_PACKAGES += \
    QXDMLoggerV2
endif # aosp_angler

PRODUCT_COPY_FILES += \
    device/huawei/angler/init.angler.diag.rc.userdebug:root/init.angler.diag.rc

# subsystem ramdump collection
PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.ssr.enable_ramdumps=1
else # userdebug eng
PRODUCT_COPY_FILES += \
    device/huawei/angler/init.angler.diag.rc.user:root/init.angler.diag.rc
endif # userdebug eng

# Incoming number (b/23529711)
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.redir_party_num=0

# OEM Unlock reporting
ADDITIONAL_DEFAULT_PROPERTIES += \
    ro.oem_unlock_supported=1

# In userdebug, add minidebug info the the boot image and the system server to support
# diagnosing native crashes.
ifneq (,$(filter userdebug, $(TARGET_BUILD_VARIANT)))
    # Boot image.
    PRODUCT_DEX_PREOPT_BOOT_FLAGS += --generate-mini-debug-info
    # System server and some of its services.
    # Note: we cannot use PRODUCT_SYSTEM_SERVER_JARS, as it has not been expanded at this point.
    $(call add-product-dex-preopt-module-config,services,--generate-mini-debug-info)
    $(call add-product-dex-preopt-module-config,wifi-service,--generate-mini-debug-info)
endif

# setup dalvik vm configs.
$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)

$(call inherit-product-if-exists, hardware/qcom/msm8994/msm8994.mk)
$(call inherit-product-if-exists, vendor/qcom/gpu/msm8994/msm8994-gpu-vendor.mk)

# copy wlan firmware
$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4358/device-bcm.mk)

# GPS configuration
PRODUCT_COPY_FILES += \
    device/huawei/angler/gps.conf:system/etc/gps.conf:qcom

# setup dm-verity configs.
PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/system
PRODUCT_VENDOR_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
$(call inherit-product, build/target/product/verity.mk)

# b/28992626
# For app investigation, make ASAN-lite only sanitize 32-bit.
ifeq (true,$(SANITIZE_LITE))
  SANITIZE_ARCH := 32
endif

# b/29995499
$(call add-product-sanitizer-module-config,cameraserver,never)
$(call add-product-sanitizer-module-config,mm-qcamera-daemon,never)