device.mk - device/huawei/angler - Git at Google

 #
 # Copyright (C) 2015 The Android Open-Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 # This file includes all definitions that apply to ALL angler devices, and
 # are also specific to angler devices
 #
 # Everything in this directory will become public

 # Enable support for chinook sensorhub
 TARGET_USES_CHINOOK_SENSORHUB := false

 ifeq ($(TARGET_PREBUILT_KERNEL),)
   LOCAL_KERNEL := device/huawei/angler-kernel/Image.gz-dtb
 else
   LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
 endif

 PRODUCT_COPY_FILES := \
     $(LOCAL_KERNEL):kernel

 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.angler.rc:root/init.angler.rc \
     device/huawei/angler/init.angler.usb.rc:root/init.angler.usb.rc \
     device/huawei/angler/fstab.angler:root/fstab.angler \
     device/huawei/angler/ueventd.angler.rc:root/ueventd.angler.rc \
     device/huawei/angler/init.recovery.angler.rc:root/init.recovery.angler.rc \
     device/huawei/angler/init.angler.power.sh:system/bin/init.angler.power.sh \
     device/huawei/angler/uinput-fpc.kl:system/usr/keylayout/uinput-fpc.kl \
     device/huawei/angler/uinput-fpc.idc:system/usr/idc/uinput-fpc.idc \
     device/huawei/angler/init.qcom.devwait.sh:system/bin/init.qcom.devwait.sh \
     device/huawei/angler/init.qcom.devstart.sh:system/bin/init.qcom.devstart.sh

 ifeq ($(TARGET_USES_CHINOOK_SENSORHUB),true)
 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.angler.sensorhub.rc:root/init.angler.sensorhub.rc
 else
 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.angler.nanohub.rc:root/init.angler.sensorhub.rc
 endif

 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.mcfg.sh:system/bin/init.mcfg.sh

 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.radio.sh:system/bin/init.radio.sh

 # Thermal configuration
 PRODUCT_COPY_FILES += \
     device/huawei/angler/thermal-engine-angler.conf:system/etc/thermal-engine.conf

 # Media
 PRODUCT_COPY_FILES += \
     frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
     frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
     frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
     device/huawei/angler/media_codecs.xml:system/etc/media_codecs.xml \
     device/huawei/angler/media_codecs_performance.xml:system/etc/media_codecs_performance.xml \
     device/huawei/angler/media_profiles.xml:system/etc/media_profiles.xml

 # Audio
 PRODUCT_COPY_FILES += \
     device/huawei/angler/audio_output_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_output_policy.conf \
     device/huawei/angler/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \
     device/huawei/angler/mixer_paths.xml:system/etc/mixer_paths.xml \
     device/huawei/angler/audio_platform_info_i2s.xml:system/etc/audio_platform_info_i2s.xml \
     device/huawei/angler/sound_trigger_mixer_paths.xml:system/etc/sound_trigger_mixer_paths.xml \
     device/huawei/angler/sound_trigger_platform_info.xml:system/etc/sound_trigger_platform_info.xml \
     device/huawei/angler/audio_platform_info.xml:system/etc/audio_platform_info.xml \
     device/huawei/angler/audio_policy_configuration.xml:system/etc/audio_policy_configuration.xml \
     device/huawei/angler/audio_policy_volumes_drc.xml:system/etc/audio_policy_volumes_drc.xml \
     frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:system/etc/a2dp_audio_policy_configuration.xml \
     frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
     frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:system/etc/usb_audio_policy_configuration.xml \
     frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \

 # Input device files
 PRODUCT_COPY_FILES += \
     device/huawei/angler/gpio-keys.kl:system/usr/keylayout/gpio-keys.kl \
     device/huawei/angler/qpnp_pon.kl:system/usr/keylayout/qpnp_pon.kl \
     device/huawei/angler/synaptics_dsx.idc:system/usr/idc/synaptics_dsx.idc

 # for launcher layout
 PRODUCT_PACKAGES += \
     AnglerLayout

 # Fingerprint Sensor
 PRODUCT_PACKAGES += \
     fingerprint.angler \
     android.hardware.biometrics.fingerprint@2.1-service

 # Delegation for OEM customization
 PRODUCT_OEM_PROPERTIES := \
     ro.config.ringtone \
     ro.config.notification_sound \
     ro.config.alarm_alert \
     ro.config.wallpaper \
     ro.config.wallpaper_component \
     ro.oem.* \
     oem.*

 PRODUCT_COPY_FILES += \
     device/huawei/angler/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config

 # Wifi
 PRODUCT_COPY_FILES += \
     device/huawei/angler/bcmdhd.cal:system/etc/wifi/bcmdhd.cal \
     device/huawei/angler/bcmdhd-pme.cal:system/etc/wifi/bcmdhd-pme.cal \
     device/huawei/angler/bcmdhd-high.cal:system/etc/wifi/bcmdhd-high.cal \
     device/huawei/angler/bcmdhd-low.cal:system/etc/wifi/bcmdhd-low.cal \
     device/huawei/angler/filter_ie:system/etc/wifi/filter_ie

 # These are the hardware-specific features
 PRODUCT_COPY_FILES += \
     frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
     frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml \
     frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
     frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
     frameworks/native/data/etc/android.hardware.camera.full.xml:system/etc/permissions/android.hardware.camera.full.xml \
     frameworks/native/data/etc/android.hardware.camera.raw.xml:system/etc/permissions/android.hardware.camera.raw.xml \
     frameworks/native/data/etc/android.hardware.fingerprint.xml:system/etc/permissions/android.hardware.fingerprint.xml \
     frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
     frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
     frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \
     frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:system/etc/permissions/android.hardware.wifi.passpoint.xml \
     frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
     frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
     frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
     frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
     frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:system/etc/permissions/android.hardware.sensor.stepcounter.xml \
     frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:system/etc/permissions/android.hardware.sensor.stepdetector.xml \
     frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:system/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
     frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
     frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
     frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
     frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \
     frameworks/native/data/etc/android.hardware.audio.low_latency.xml:system/etc/permissions/android.hardware.audio.low_latency.xml \
     frameworks/native/data/etc/android.hardware.audio.pro.xml:system/etc/permissions/android.hardware.audio.pro.xml \
     frameworks/native/data/etc/android.hardware.telephony.cdma.xml:system/etc/permissions/android.hardware.telephony.cdma.xml \
     frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
     frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
     frameworks/native/data/etc/android.hardware.nfc.hce.xml:system/etc/permissions/android.hardware.nfc.hce.xml \
     frameworks/native/data/etc/android.hardware.nfc.hcef.xml:system/etc/permissions/android.hardware.nfc.hcef.xml \
     frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \
     frameworks/native/data/etc/android.software.midi.xml:system/etc/permissions/android.software.midi.xml \
     frameworks/native/data/etc/android.software.verified_boot.xml:system/etc/permissions/android.software.verified_boot.xml \
     frameworks/native/data/etc/com.nxp.mifare.xml:system/etc/permissions/com.nxp.mifare.xml \
     frameworks/native/data/etc/android.hardware.opengles.aep.xml:system/etc/permissions/android.hardware.opengles.aep.xml \
     frameworks/native/data/etc/android.hardware.vulkan.level-0.xml:system/etc/permissions/android.hardware.vulkan.level.xml \
     frameworks/native/data/etc/android.hardware.vulkan.version-1_0_3.xml:system/etc/permissions/android.hardware.vulkan.version.xml


 # MSM IRQ Balancer configuration file
 PRODUCT_COPY_FILES += \
     device/huawei/angler/msm_irqbalance.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance.conf

 # Qseecomd configuration file
 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.angler.qseecomd.sh:system/bin/init.angler.qseecomd.sh

 PRODUCT_TAGS += dalvik.gc.type-precise

 # This device is 560dpi.  However the platform doesn't
 # currently contain all of the bitmaps at 560dpi density so
 # we do this little trick to fall back to the xxhdpi version
 # if the 560dpi doesn't exist.
 PRODUCT_AAPT_CONFIG := normal
 PRODUCT_AAPT_PREF_CONFIG := 560dpi
 # A list of dpis to select prebuilt apk, in precedence order.
 PRODUCT_AAPT_PREBUILT_DPI := xxxhdpi xxhdpi xhdpi hdpi

 PRODUCT_CHARACTERISTICS := nosdcard

 PRODUCT_PACKAGES += \
     gralloc.msm8994 \
     android.hardware.graphics.allocator@2.0-impl \
     android.hardware.graphics.allocator@2.0-service \
     android.hardware.graphics.mapper@2.0-impl \
     hwcomposer.msm8994 \
     libgenlock \
     memtrack.msm8994 \
     android.hardware.memtrack@1.0-impl

 # Light HAL
 PRODUCT_PACKAGES += \
     lights.angler \
     android.hardware.light@2.0-impl

 # RenderScript HAL
 PRODUCT_PACKAGES += \
     android.hardware.renderscript@1.0-impl

 PRODUCT_PACKAGES += \
     android.hardware.drm@1.0-impl \

 USE_XML_AUDIO_POLICY_CONF := 1
 PRODUCT_PACKAGES += \
     audio.primary.msm8994 \
     audio.a2dp.default \
     audio.usb.default \
     audio.r_submix.default \
     libaudio-resampler \
     dsm_ctrl

 PRODUCT_PACKAGES += \
     android.hardware.soundtrigger@2.0-impl

 # Audio effects
 PRODUCT_PACKAGES += \
     libqcomvisualizer \
     libqcomvoiceprocessing \
     libqcomvoiceprocessingdescriptors \
     libqcompostprocbundle

 PRODUCT_PACKAGES += \
     libc2dcolorconvert \
     libstagefrighthw \
     libOmxCore \
     libmm-omxcore \
     libOmxVdec \
     libOmxVdecHevc \
     libOmxVenc

 PRODUCT_PACKAGES += \
     android.hardware.audio@2.0-impl \
     android.hardware.audio.effect@2.0-impl \
     android.hardware.soundtrigger@2.0-impl

 #CAMERA
 PRODUCT_PACKAGES += \
     camera.device@3.2-impl \
     android.hardware.camera.provider@2.4-impl \
     camera.msm8994 \
     libcamera \
     libmmcamera_interface \
     libmmcamera_interface2 \
     libmmjpeg_interface \
     libqomx_core \
     mm-qcamera-app

 # GPS
 PRODUCT_PACKAGES += \
     libgps.utils \
     gps.msm8994

 PRODUCT_PACKAGES += \
     android.hardware.graphics.composer@2.1-impl

 # Sensor & activity_recognition HAL
 TARGET_USES_NANOHUB_SENSORHAL := true
 NANOHUB_SENSORHAL_LID_STATE_ENABLED := true
 NANOHUB_SENSORHAL_USB_MAG_BIAS_ENABLED := true
 NANOHUB_SENSORHAL_SENSORLIST := $(LOCAL_PATH)/sensorhal/sensorlist.cpp
 NANOHUB_SENSORHAL_DIRECT_REPORT_ENABLED := true

 PRODUCT_PACKAGES += \
     sensors.angler \
     activity_recognition.angler \
     context_hub.default \
     android.hardware.sensors@1.0-impl \
     android.hardware.contexthub@1.0-impl \

 # new gatekeeper HAL
 PRODUCT_PACKAGES += \
     android.hardware.gatekeeper@1.0-impl

 ifeq ($(TARGET_USES_CHINOOK_SENSORHUB),true)
 PRODUCT_PACKAGES += \
     sensortool.angler \
     nano4x1.bin
 else
 PRODUCT_PACKAGES += \
     nanoapp_cmd
 endif

 # sensor utilities (only for userdebug and eng builds)
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 PRODUCT_PACKAGES += \
     nanotool \
     sensortest
 endif

 # for off charging mode
 PRODUCT_PACKAGES += \
     charger_res_images

 PRODUCT_PACKAGES += \
     android.hardware.wifi@1.0-service \
     libwpa_client \
     hostapd \
     wlutil \
     wificond \
     wifilogd \
     wpa_supplicant \
     wpa_supplicant.conf

 # Bluetooth HAL
 PRODUCT_PACKAGES += \
     libbt-vendor \
     android.hardware.bluetooth@1.0-impl

 # NFC
 PRODUCT_PACKAGES += \
     libnfc-nci \
     NfcNci \
     Tag \
     nfc_nci.msm8994 \
     android.hardware.nfc@1.0-impl \

 # Keymaster HAL
 PRODUCT_PACKAGES += \
     android.hardware.keymaster@3.0-impl

 # Vibrator
 PRODUCT_PACKAGES += \
     android.hardware.vibrator@1.0-impl

 # Power HAL
 PRODUCT_PACKAGES += \
     power.angler \
     android.hardware.power@1.0-impl \

 # Thermal HAL
 PRODUCT_PACKAGES += \
     thermal.angler \
     android.hardware.thermal@1.0-impl

 #GNSS HAL
 PRODUCT_PACKAGES += \
     android.hardware.gnss@1.0-impl

 #USB HAL
 PRODUCT_PACKAGES += \
     android.hardware.usb@1.0-service
 # Library used for VTS tests  (only for userdebug and eng builds)
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 # For VTS profiling.
 PRODUCT_PACKAGES += \
      libvts_profiling \
      libvts_multidevice_proto
 endif

 PRODUCT_COPY_FILES += \
     device/huawei/angler/nfc/libnfc-brcm.conf:system/etc/libnfc-brcm.conf \
     device/huawei/angler/nfc/libnfc-nxp.conf:system/etc/libnfc-nxp.conf

 DEVICE_PACKAGE_OVERLAYS := \
     device/huawei/angler/overlay

 PRODUCT_PROPERTY_OVERRIDES += \
     ro.opengles.version=196610

 PRODUCT_PROPERTY_OVERRIDES += \
     ro.sf.lcd_density=560

 PRODUCT_PROPERTY_OVERRIDES += \
     persist.hwc.mdpcomp.enable=true \
     persist.data.mode=concurrent

 PRODUCT_PROPERTY_OVERRIDES += \
     persist.radio.data_no_toggle=1

 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.radio.data_con_rprt=true

 # Write Manufacturer & Model information in created media files.
 # IMPORTANT: ONLY SET THIS PROPERTY TO TRUE FOR PUBLIC DEVICES
 ifneq ($(filter aosp_angler% angler%, $(TARGET_PRODUCT)),)
 PRODUCT_PROPERTY_OVERRIDES += \
     media.recorder.show_manufacturer_and_model=true
 else
 $(error "you must decide whether to write manufacturer and model information into created media files for this device. ONLY ENABLE IT FOR PUBLIC DEVICE.")
 endif  #TARGET_PRODUCT

 PRODUCT_PROPERTY_OVERRIDES += \
     ro.hwui.texture_cache_size=72 \
     ro.hwui.layer_cache_size=48 \
     ro.hwui.r_buffer_cache_size=8 \
     ro.hwui.path_cache_size=32 \
     ro.hwui.gradient_cache_size=1 \
     ro.hwui.drop_shadow_cache_size=6 \
     ro.hwui.texture_cache_flushrate=0.4 \
     ro.hwui.text_small_cache_width=1024 \
     ro.hwui.text_small_cache_height=1024 \
     ro.hwui.text_large_cache_width=2048 \
     ro.hwui.text_large_cache_height=1024

 # Enable low power video mode for 4K encode
 PRODUCT_PROPERTY_OVERRIDES += \
     vidc.debug.perf.mode=2 \
     vidc.enc.dcvs.extra-buff-count=2

 # for perfd
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.min_freq_0=384000 \
     ro.min_freq_4=384000

 PRODUCT_PROPERTY_OVERRIDES += \
     ro.vendor.extension_library=libqti-perfd-client.so

 PRODUCT_PROPERTY_OVERRIDES += \
     rild.libpath=/vendor/lib64/libril-qc-qmi-1.so

 PRODUCT_PROPERTY_OVERRIDES += \
     ro.telephony.default_cdma_sub=0

 # LTE, CDMA, GSM/WCDMA
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.telephony.default_network=10 \
     telephony.lteOnCdmaDevice=1 \
     persist.radio.mode_pref_nv10=1

 PRODUCT_PROPERTY_OVERRIDES += \
     persist.radio.apm_sim_not_pwdn=1

 # Setup custom emergency number list based on the MCC. This is needed by RIL
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.radio.custom_ecc=1

 # Enable Wifi calling
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.data.iwlan.enable=true

 PRODUCT_PROPERTY_OVERRIDES += \
    ro.frp.pst=/dev/block/platform/soc.0/f9824900.sdhci/by-name/frp

 # Request modem to send PLMN name always irrespective
 # of display condition in EFSPN.
 # RIL uses this property.
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.radio.always_send_plmn=true

 # If data_no_toggle is 0 there are no reports if the screen is off.
 # If data_no_toggle is 1 then dormancy indications will come with screen off.
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.radio.data_no_toggle=1

 # Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.telephony.call_ring.multiple=0

 # Update 1x signal strength after 2s
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
     persist.radio.snapshot_enabled=1 \
     persist.radio.snapshot_timer=2

 # Reduce client buffer size for fast audio output tracks
 PRODUCT_PROPERTY_OVERRIDES += \
     af.fast_track_multiplier=1

 # Low latency audio buffer size in frames
 PRODUCT_PROPERTY_OVERRIDES += \
     audio_hal.period_size=192

 #for qcom modify fluence type name, here added and enable
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.qc.sdk.audio.fluencetype="fluence" \
     persist.audio.fluence.voicecall=true \
     persist.audio.fluence.voicecomm=true \
     persist.audio.product.identify="angler" \
     persist.audio.fluence.speaker=true

 # Default OMX service to non-Treble
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.media.treble_omx=false

 # Enable AAC 5.1 output
 PRODUCT_PROPERTY_OVERRIDES += \
     media.aac_51_output_enabled=true

 #stereo speakers: orientation changes swap L/R channels
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.audio.monitorRotation=true

 # low audio flinger standby delay to reduce power consumption
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.audio.flinger_standbytime_ms=300

 PRODUCT_PROPERTY_OVERRIDES += \
     persist.sys.ssr.restart_level="ALL_ENABLE"

 # Enable camera EIS
 # eis.enable: enables electronic image stabilization
 # is_type: sets image stabilization type
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.camera.eis.enable=1 \
     persist.camera.is_type=4

 # For android_filesystem_config.h
 PRODUCT_PACKAGES += \
    fs_config_files

 # For data
 PRODUCT_PACKAGES += \
    librmnetctl

 # limit dex2oat threads to improve thermals
 PRODUCT_PROPERTY_OVERRIDES += \
     dalvik.vm.boot-dex2oat-threads=4 \
     dalvik.vm.dex2oat-threads=4 \
     dalvik.vm.image-dex2oat-threads=4

 # Modem debugger
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 ifeq (,$(filter aosp_angler, $(TARGET_PRODUCT)))
 PRODUCT_PACKAGES += \
     NexusLogger
 endif # aosp_angler

 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.angler.diag.rc.userdebug:root/init.angler.diag.rc

 # subsystem ramdump collection
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.sys.ssr.enable_ramdumps=1
 else # userdebug eng
 PRODUCT_COPY_FILES += \
     device/huawei/angler/init.angler.diag.rc.user:root/init.angler.diag.rc
 endif # userdebug eng

 # Incoming number (b/23529711)
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.radio.redir_party_num=0

 # OEM Unlock reporting
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
     ro.oem_unlock_supported=1

 # ro.product.first_api_level indicates the first api level the device has commercially launched on.
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.product.first_api_level=23

 # setup dalvik vm configs.
 $(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)

 $(call inherit-product-if-exists, hardware/qcom/msm8994/msm8994.mk)
 $(call inherit-product-if-exists, vendor/qcom/gpu/msm8994/msm8994-gpu-vendor.mk)

 # copy wlan firmware
 $(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4358/device-bcm.mk)

 # GPS configuration
 PRODUCT_COPY_FILES += \
     device/huawei/angler/gps.conf:system/etc/gps.conf:qcom

 # setup dm-verity configs.
 PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/system
 PRODUCT_VENDOR_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
 $(call inherit-product, build/target/product/verity.mk)

 # b/29995499
 $(call add-product-sanitizer-module-config,cameraserver,never)
 $(call add-product-sanitizer-module-config,mm-qcamera-daemon,never)

 # b/36201281
 $(call add-product-sanitizer-module-config,thermal-engine,never)
 $(call add-product-sanitizer-module-config,qmuxd,never)
	#
	# Copyright (C) 2015 The Android Open-Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	# This file includes all definitions that apply to ALL angler devices, and
	# are also specific to angler devices
	#
	# Everything in this directory will become public

	# Enable support for chinook sensorhub
	TARGET_USES_CHINOOK_SENSORHUB := false

	ifeq ($(TARGET_PREBUILT_KERNEL),)
	LOCAL_KERNEL := device/huawei/angler-kernel/Image.gz-dtb
	else
	LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
	endif

	PRODUCT_COPY_FILES := \
	$(LOCAL_KERNEL):kernel

	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.angler.rc:root/init.angler.rc \
	device/huawei/angler/init.angler.usb.rc:root/init.angler.usb.rc \
	device/huawei/angler/fstab.angler:root/fstab.angler \
	device/huawei/angler/ueventd.angler.rc:root/ueventd.angler.rc \
	device/huawei/angler/init.recovery.angler.rc:root/init.recovery.angler.rc \
	device/huawei/angler/init.angler.power.sh:system/bin/init.angler.power.sh \
	device/huawei/angler/uinput-fpc.kl:system/usr/keylayout/uinput-fpc.kl \
	device/huawei/angler/uinput-fpc.idc:system/usr/idc/uinput-fpc.idc \
	device/huawei/angler/init.qcom.devwait.sh:system/bin/init.qcom.devwait.sh \
	device/huawei/angler/init.qcom.devstart.sh:system/bin/init.qcom.devstart.sh

	ifeq ($(TARGET_USES_CHINOOK_SENSORHUB),true)
	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.angler.sensorhub.rc:root/init.angler.sensorhub.rc
	else
	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.angler.nanohub.rc:root/init.angler.sensorhub.rc
	endif

	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.mcfg.sh:system/bin/init.mcfg.sh

	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.radio.sh:system/bin/init.radio.sh

	# Thermal configuration
	PRODUCT_COPY_FILES += \
	device/huawei/angler/thermal-engine-angler.conf:system/etc/thermal-engine.conf

	# Media
	PRODUCT_COPY_FILES += \
	frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
	frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
	frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
	device/huawei/angler/media_codecs.xml:system/etc/media_codecs.xml \
	device/huawei/angler/media_codecs_performance.xml:system/etc/media_codecs_performance.xml \
	device/huawei/angler/media_profiles.xml:system/etc/media_profiles.xml

	# Audio
	PRODUCT_COPY_FILES += \
	device/huawei/angler/audio_output_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_output_policy.conf \
	device/huawei/angler/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \
	device/huawei/angler/mixer_paths.xml:system/etc/mixer_paths.xml \
	device/huawei/angler/audio_platform_info_i2s.xml:system/etc/audio_platform_info_i2s.xml \
	device/huawei/angler/sound_trigger_mixer_paths.xml:system/etc/sound_trigger_mixer_paths.xml \
	device/huawei/angler/sound_trigger_platform_info.xml:system/etc/sound_trigger_platform_info.xml \
	device/huawei/angler/audio_platform_info.xml:system/etc/audio_platform_info.xml \
	device/huawei/angler/audio_policy_configuration.xml:system/etc/audio_policy_configuration.xml \
	device/huawei/angler/audio_policy_volumes_drc.xml:system/etc/audio_policy_volumes_drc.xml \
	frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:system/etc/a2dp_audio_policy_configuration.xml \
	frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
	frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:system/etc/usb_audio_policy_configuration.xml \
	frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \

	# Input device files
	PRODUCT_COPY_FILES += \
	device/huawei/angler/gpio-keys.kl:system/usr/keylayout/gpio-keys.kl \
	device/huawei/angler/qpnp_pon.kl:system/usr/keylayout/qpnp_pon.kl \
	device/huawei/angler/synaptics_dsx.idc:system/usr/idc/synaptics_dsx.idc

	# for launcher layout
	PRODUCT_PACKAGES += \
	AnglerLayout

	# Fingerprint Sensor
	PRODUCT_PACKAGES += \
	fingerprint.angler \
	android.hardware.biometrics.fingerprint@2.1-service

	# Delegation for OEM customization
	PRODUCT_OEM_PROPERTIES := \
	ro.config.ringtone \
	ro.config.notification_sound \
	ro.config.alarm_alert \
	ro.config.wallpaper \
	ro.config.wallpaper_component \
	ro.oem.* \
	oem.*

	PRODUCT_COPY_FILES += \
	device/huawei/angler/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config

	# Wifi
	PRODUCT_COPY_FILES += \
	device/huawei/angler/bcmdhd.cal:system/etc/wifi/bcmdhd.cal \
	device/huawei/angler/bcmdhd-pme.cal:system/etc/wifi/bcmdhd-pme.cal \
	device/huawei/angler/bcmdhd-high.cal:system/etc/wifi/bcmdhd-high.cal \
	device/huawei/angler/bcmdhd-low.cal:system/etc/wifi/bcmdhd-low.cal \
	device/huawei/angler/filter_ie:system/etc/wifi/filter_ie

	# These are the hardware-specific features
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
	frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml \
	frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
	frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
	frameworks/native/data/etc/android.hardware.camera.full.xml:system/etc/permissions/android.hardware.camera.full.xml \
	frameworks/native/data/etc/android.hardware.camera.raw.xml:system/etc/permissions/android.hardware.camera.raw.xml \
	frameworks/native/data/etc/android.hardware.fingerprint.xml:system/etc/permissions/android.hardware.fingerprint.xml \
	frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
	frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
	frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \
	frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:system/etc/permissions/android.hardware.wifi.passpoint.xml \
	frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
	frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
	frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
	frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
	frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:system/etc/permissions/android.hardware.sensor.stepcounter.xml \
	frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:system/etc/permissions/android.hardware.sensor.stepdetector.xml \
	frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:system/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
	frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
	frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
	frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
	frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \
	frameworks/native/data/etc/android.hardware.audio.low_latency.xml:system/etc/permissions/android.hardware.audio.low_latency.xml \
	frameworks/native/data/etc/android.hardware.audio.pro.xml:system/etc/permissions/android.hardware.audio.pro.xml \
	frameworks/native/data/etc/android.hardware.telephony.cdma.xml:system/etc/permissions/android.hardware.telephony.cdma.xml \
	frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
	frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
	frameworks/native/data/etc/android.hardware.nfc.hce.xml:system/etc/permissions/android.hardware.nfc.hce.xml \
	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:system/etc/permissions/android.hardware.nfc.hcef.xml \
	frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml \
	frameworks/native/data/etc/android.software.midi.xml:system/etc/permissions/android.software.midi.xml \
	frameworks/native/data/etc/android.software.verified_boot.xml:system/etc/permissions/android.software.verified_boot.xml \
	frameworks/native/data/etc/com.nxp.mifare.xml:system/etc/permissions/com.nxp.mifare.xml \
	frameworks/native/data/etc/android.hardware.opengles.aep.xml:system/etc/permissions/android.hardware.opengles.aep.xml \
	frameworks/native/data/etc/android.hardware.vulkan.level-0.xml:system/etc/permissions/android.hardware.vulkan.level.xml \
	frameworks/native/data/etc/android.hardware.vulkan.version-1_0_3.xml:system/etc/permissions/android.hardware.vulkan.version.xml


	# MSM IRQ Balancer configuration file
	PRODUCT_COPY_FILES += \
	device/huawei/angler/msm_irqbalance.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance.conf

	# Qseecomd configuration file
	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.angler.qseecomd.sh:system/bin/init.angler.qseecomd.sh

	PRODUCT_TAGS += dalvik.gc.type-precise

	# This device is 560dpi. However the platform doesn't
	# currently contain all of the bitmaps at 560dpi density so
	# we do this little trick to fall back to the xxhdpi version
	# if the 560dpi doesn't exist.
	PRODUCT_AAPT_CONFIG := normal
	PRODUCT_AAPT_PREF_CONFIG := 560dpi
	# A list of dpis to select prebuilt apk, in precedence order.
	PRODUCT_AAPT_PREBUILT_DPI := xxxhdpi xxhdpi xhdpi hdpi

	PRODUCT_CHARACTERISTICS := nosdcard

	PRODUCT_PACKAGES += \
	gralloc.msm8994 \
	android.hardware.graphics.allocator@2.0-impl \
	android.hardware.graphics.allocator@2.0-service \
	android.hardware.graphics.mapper@2.0-impl \
	hwcomposer.msm8994 \
	libgenlock \
	memtrack.msm8994 \
	android.hardware.memtrack@1.0-impl

	# Light HAL
	PRODUCT_PACKAGES += \
	lights.angler \
	android.hardware.light@2.0-impl

	# RenderScript HAL
	PRODUCT_PACKAGES += \
	android.hardware.renderscript@1.0-impl

	PRODUCT_PACKAGES += \
	android.hardware.drm@1.0-impl \

	USE_XML_AUDIO_POLICY_CONF := 1
	PRODUCT_PACKAGES += \
	audio.primary.msm8994 \
	audio.a2dp.default \
	audio.usb.default \
	audio.r_submix.default \
	libaudio-resampler \
	dsm_ctrl

	PRODUCT_PACKAGES += \
	android.hardware.soundtrigger@2.0-impl

	# Audio effects
	PRODUCT_PACKAGES += \
	libqcomvisualizer \
	libqcomvoiceprocessing \
	libqcomvoiceprocessingdescriptors \
	libqcompostprocbundle

	PRODUCT_PACKAGES += \
	libc2dcolorconvert \
	libstagefrighthw \
	libOmxCore \
	libmm-omxcore \
	libOmxVdec \
	libOmxVdecHevc \
	libOmxVenc

	PRODUCT_PACKAGES += \
	android.hardware.audio@2.0-impl \
	android.hardware.audio.effect@2.0-impl \
	android.hardware.soundtrigger@2.0-impl

	#CAMERA
	PRODUCT_PACKAGES += \
	camera.device@3.2-impl \
	android.hardware.camera.provider@2.4-impl \
	camera.msm8994 \
	libcamera \
	libmmcamera_interface \
	libmmcamera_interface2 \
	libmmjpeg_interface \
	libqomx_core \
	mm-qcamera-app

	# GPS
	PRODUCT_PACKAGES += \
	libgps.utils \
	gps.msm8994

	PRODUCT_PACKAGES += \
	android.hardware.graphics.composer@2.1-impl

	# Sensor & activity_recognition HAL
	TARGET_USES_NANOHUB_SENSORHAL := true
	NANOHUB_SENSORHAL_LID_STATE_ENABLED := true
	NANOHUB_SENSORHAL_USB_MAG_BIAS_ENABLED := true
	NANOHUB_SENSORHAL_SENSORLIST := $(LOCAL_PATH)/sensorhal/sensorlist.cpp
	NANOHUB_SENSORHAL_DIRECT_REPORT_ENABLED := true

	PRODUCT_PACKAGES += \
	sensors.angler \
	activity_recognition.angler \
	context_hub.default \
	android.hardware.sensors@1.0-impl \
	android.hardware.contexthub@1.0-impl \

	# new gatekeeper HAL
	PRODUCT_PACKAGES += \
	android.hardware.gatekeeper@1.0-impl

	ifeq ($(TARGET_USES_CHINOOK_SENSORHUB),true)
	PRODUCT_PACKAGES += \
	sensortool.angler \
	nano4x1.bin
	else
	PRODUCT_PACKAGES += \
	nanoapp_cmd
	endif

	# sensor utilities (only for userdebug and eng builds)
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_PACKAGES += \
	nanotool \
	sensortest
	endif

	# for off charging mode
	PRODUCT_PACKAGES += \
	charger_res_images

	PRODUCT_PACKAGES += \
	android.hardware.wifi@1.0-service \
	libwpa_client \
	hostapd \
	wlutil \
	wificond \
	wifilogd \
	wpa_supplicant \
	wpa_supplicant.conf

	# Bluetooth HAL
	PRODUCT_PACKAGES += \
	libbt-vendor \
	android.hardware.bluetooth@1.0-impl

	# NFC
	PRODUCT_PACKAGES += \
	libnfc-nci \
	NfcNci \
	Tag \
	nfc_nci.msm8994 \
	android.hardware.nfc@1.0-impl \

	# Keymaster HAL
	PRODUCT_PACKAGES += \
	android.hardware.keymaster@3.0-impl

	# Vibrator
	PRODUCT_PACKAGES += \
	android.hardware.vibrator@1.0-impl

	# Power HAL
	PRODUCT_PACKAGES += \
	power.angler \
	android.hardware.power@1.0-impl \

	# Thermal HAL
	PRODUCT_PACKAGES += \
	thermal.angler \
	android.hardware.thermal@1.0-impl

	#GNSS HAL
	PRODUCT_PACKAGES += \
	android.hardware.gnss@1.0-impl

	#USB HAL
	PRODUCT_PACKAGES += \
	android.hardware.usb@1.0-service
	# Library used for VTS tests (only for userdebug and eng builds)
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	# For VTS profiling.
	PRODUCT_PACKAGES += \
	libvts_profiling \
	libvts_multidevice_proto
	endif

	PRODUCT_COPY_FILES += \
	device/huawei/angler/nfc/libnfc-brcm.conf:system/etc/libnfc-brcm.conf \
	device/huawei/angler/nfc/libnfc-nxp.conf:system/etc/libnfc-nxp.conf

	DEVICE_PACKAGE_OVERLAYS := \
	device/huawei/angler/overlay

	PRODUCT_PROPERTY_OVERRIDES += \
	ro.opengles.version=196610

	PRODUCT_PROPERTY_OVERRIDES += \
	ro.sf.lcd_density=560

	PRODUCT_PROPERTY_OVERRIDES += \
	persist.hwc.mdpcomp.enable=true \
	persist.data.mode=concurrent

	PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.data_no_toggle=1

	PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.data_con_rprt=true

	# Write Manufacturer & Model information in created media files.
	# IMPORTANT: ONLY SET THIS PROPERTY TO TRUE FOR PUBLIC DEVICES
	ifneq ($(filter aosp_angler% angler%, $(TARGET_PRODUCT)),)
	PRODUCT_PROPERTY_OVERRIDES += \
	media.recorder.show_manufacturer_and_model=true
	else
	$(error "you must decide whether to write manufacturer and model information into created media files for this device. ONLY ENABLE IT FOR PUBLIC DEVICE.")
	endif #TARGET_PRODUCT

	PRODUCT_PROPERTY_OVERRIDES += \
	ro.hwui.texture_cache_size=72 \
	ro.hwui.layer_cache_size=48 \
	ro.hwui.r_buffer_cache_size=8 \
	ro.hwui.path_cache_size=32 \
	ro.hwui.gradient_cache_size=1 \
	ro.hwui.drop_shadow_cache_size=6 \
	ro.hwui.texture_cache_flushrate=0.4 \
	ro.hwui.text_small_cache_width=1024 \
	ro.hwui.text_small_cache_height=1024 \
	ro.hwui.text_large_cache_width=2048 \
	ro.hwui.text_large_cache_height=1024

	# Enable low power video mode for 4K encode
	PRODUCT_PROPERTY_OVERRIDES += \
	vidc.debug.perf.mode=2 \
	vidc.enc.dcvs.extra-buff-count=2

	# for perfd
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.min_freq_0=384000 \
	ro.min_freq_4=384000

	PRODUCT_PROPERTY_OVERRIDES += \
	ro.vendor.extension_library=libqti-perfd-client.so

	PRODUCT_PROPERTY_OVERRIDES += \
	rild.libpath=/vendor/lib64/libril-qc-qmi-1.so

	PRODUCT_PROPERTY_OVERRIDES += \
	ro.telephony.default_cdma_sub=0

	# LTE, CDMA, GSM/WCDMA
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.telephony.default_network=10 \
	telephony.lteOnCdmaDevice=1 \
	persist.radio.mode_pref_nv10=1

	PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.apm_sim_not_pwdn=1

	# Setup custom emergency number list based on the MCC. This is needed by RIL
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.custom_ecc=1

	# Enable Wifi calling
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.data.iwlan.enable=true

	PRODUCT_PROPERTY_OVERRIDES += \
	ro.frp.pst=/dev/block/platform/soc.0/f9824900.sdhci/by-name/frp

	# Request modem to send PLMN name always irrespective
	# of display condition in EFSPN.
	# RIL uses this property.
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.always_send_plmn=true

	# If data_no_toggle is 0 there are no reports if the screen is off.
	# If data_no_toggle is 1 then dormancy indications will come with screen off.
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.data_no_toggle=1

	# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.telephony.call_ring.multiple=0

	# Update 1x signal strength after 2s
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
	persist.radio.snapshot_enabled=1 \
	persist.radio.snapshot_timer=2

	# Reduce client buffer size for fast audio output tracks
	PRODUCT_PROPERTY_OVERRIDES += \
	af.fast_track_multiplier=1

	# Low latency audio buffer size in frames
	PRODUCT_PROPERTY_OVERRIDES += \
	audio_hal.period_size=192

	#for qcom modify fluence type name, here added and enable
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.qc.sdk.audio.fluencetype="fluence" \
	persist.audio.fluence.voicecall=true \
	persist.audio.fluence.voicecomm=true \
	persist.audio.product.identify="angler" \
	persist.audio.fluence.speaker=true

	# Default OMX service to non-Treble
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.media.treble_omx=false

	# Enable AAC 5.1 output
	PRODUCT_PROPERTY_OVERRIDES += \
	media.aac_51_output_enabled=true

	#stereo speakers: orientation changes swap L/R channels
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.monitorRotation=true

	# low audio flinger standby delay to reduce power consumption
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.flinger_standbytime_ms=300

	PRODUCT_PROPERTY_OVERRIDES += \
	persist.sys.ssr.restart_level="ALL_ENABLE"

	# Enable camera EIS
	# eis.enable: enables electronic image stabilization
	# is_type: sets image stabilization type
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.camera.eis.enable=1 \
	persist.camera.is_type=4

	# For android_filesystem_config.h
	PRODUCT_PACKAGES += \
	fs_config_files

	# For data
	PRODUCT_PACKAGES += \
	librmnetctl

	# limit dex2oat threads to improve thermals
	PRODUCT_PROPERTY_OVERRIDES += \
	dalvik.vm.boot-dex2oat-threads=4 \
	dalvik.vm.dex2oat-threads=4 \
	dalvik.vm.image-dex2oat-threads=4

	# Modem debugger
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	ifeq (,$(filter aosp_angler, $(TARGET_PRODUCT)))
	PRODUCT_PACKAGES += \
	NexusLogger
	endif # aosp_angler

	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.angler.diag.rc.userdebug:root/init.angler.diag.rc

	# subsystem ramdump collection
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.sys.ssr.enable_ramdumps=1
	else # userdebug eng
	PRODUCT_COPY_FILES += \
	device/huawei/angler/init.angler.diag.rc.user:root/init.angler.diag.rc
	endif # userdebug eng

	# Incoming number (b/23529711)
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.radio.redir_party_num=0

	# OEM Unlock reporting
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
	ro.oem_unlock_supported=1

	# ro.product.first_api_level indicates the first api level the device has commercially launched on.
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.product.first_api_level=23

	# setup dalvik vm configs.
	$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)

	$(call inherit-product-if-exists, hardware/qcom/msm8994/msm8994.mk)
	$(call inherit-product-if-exists, vendor/qcom/gpu/msm8994/msm8994-gpu-vendor.mk)

	# copy wlan firmware
	$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4358/device-bcm.mk)

	# GPS configuration
	PRODUCT_COPY_FILES += \
	device/huawei/angler/gps.conf:system/etc/gps.conf:qcom

	# setup dm-verity configs.
	PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/system
	PRODUCT_VENDOR_VERITY_PARTITION := /dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor
	$(call inherit-product, build/target/product/verity.mk)

	# b/29995499
	$(call add-product-sanitizer-module-config,cameraserver,never)
	$(call add-product-sanitizer-module-config,mm-qcamera-daemon,never)

	# b/36201281
	$(call add-product-sanitizer-module-config,thermal-engine,never)
	$(call add-product-sanitizer-module-config,qmuxd,never)