| #Version check for XTRA |
| #DISABLE = 0 |
| #AUTO = 1 |
| #XTRA2 = 2 |
| #XTRA3 = 3 |
| XTRA_VERSION_CHECK=1 |
| |
| # Error Estimate |
| # _SET = 1 |
| # _CLEAR = 0 |
| ERR_ESTIMATE=0 |
| |
| # NTP Server |
| # NTP_SERVER=time.gpsonextra.net |
| # Asia |
| # NTP_SERVER=asia.pool.ntp.org |
| # Europe |
| # NTP_SERVER=europe.pool.ntp.org |
| # North America |
| # NTP_SERVER=north-america.pool.ntp.org |
| |
| NTP_SERVER = time.google.com |
| |
| # If NTP_SERVER is commented NTP_SERVER=time.izatcloud.net is used |
| |
| # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info |
| # 4 - Debug, 5 - Verbose |
| # If DEBUG_LEVEL is commented, Android's logging levels will be used |
| DEBUG_LEVEL = 3 |
| |
| # Intermediate position report, 1=enable, 0=disable |
| INTERMEDIATE_POS=0 |
| |
| # GPS Capabilities bit mask |
| # SCHEDULING = 0x01 |
| # MSB = 0x02 |
| # MSA = 0x04 |
| # ON_DEMAND_TIME = 0x10 |
| # GEOFENCE = 0x20 |
| # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE |
| CAPABILITIES=0x37 |
| |
| # Accuracy threshold for intermediate positions |
| # less accurate positions are ignored, 0 for passing all positions |
| # ACCURACY_THRES=5000 |
| |
| ################################ |
| ##### AGPS server settings ##### |
| ################################ |
| # Bitmask of slots that are available |
| # for write/install to, where 1s indicate writable, |
| # and the default value is 0 where no slots |
| # are writable. For example, AGPS_CERT_WRITABLE_MASK |
| # of b1000001010 makes 3 slots available |
| # and the remaining 7 slots unwritable. |
| # AGPS_CERT_WRITABLE_MASK=0 |
| |
| ################################ |
| # EXTRA SETTINGS |
| ################################ |
| # NMEA provider (1=Modem Processor, 0=Application Processor) |
| NMEA_PROVIDER=0 |
| |
| # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) |
| SGLTE_TARGET=0 |
| |
| ################################################## |
| # Select technology for LPPe Control Plane |
| ################################################## |
| # 0x1: DBH for LPPe CP |
| # 0x2: WLAN AP Measurements for LPPe CP |
| LPPE_CP_TECHNOLOGY = 0 |
| |
| ################################################## |
| # Select technology for LPPe User Plane |
| ################################################## |
| # 0x1: DBH for LPPe UP |
| # 0x2: WLAN AP Measurements for LPPe UP |
| LPPE_UP_TECHNOLOGY = 0 |
| |
| ################################################## |
| # AGPS_CONFIG_INJECT |
| ################################################## |
| # enable/disable injection of AGPS configurations: |
| # SUPL_VER |
| # SUPL_HOST |
| # SUPL_PORT |
| # SUPL_MODE |
| # SUPL_ES |
| # C2K_HOST |
| # C2K_PORT |
| # LPP_PROFILE |
| # A_GLONASS_POS_PROTOCOL_SELECT |
| # USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL |
| # GPS_LOCK |
| # 0: disable |
| # 1: enable |
| AGPS_CONFIG_INJECT = 1 |
| |
| # AP Coarse Timestamp Uncertainty |
| ################################################## |
| # default : 10 |
| # or as per clock uncertainty of product |
| AP_TIMESTAMP_UNCERTAINTY = 10 |
| |
| ##################################### |
| #DR_SYNC Pulse Availability |
| ##################################### |
| # 0 : DR_SYNC pulse not available (default) |
| # 1 : DR_SYNC pulse available |
| DR_SYNC_ENABLED = 0 |
| |
| ##################################### |
| #PPS Device name |
| ##################################### |
| PPS_DEVICENAME = /dev/pps0 |
| |
| ##################################### |
| #AP Clock Accuracy |
| ##################################### |
| AP_CLOCK_PPM = 100 |
| |
| ##################################### |
| #MAX ms difference to detect missing pulse |
| ##################################### |
| MISSING_PULSE_TIME_DELTA = 900 |
| |
| ##################################### |
| #Propagation time uncertainty |
| ##################################### |
| PROPAGATION_TIME_UNCERTAINTY = 1 |
