| # Copyright 2017 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # If you don't need to do a full clean build but would like to touch |
| # a file or delete some intermediate files, add a clean step to the end |
| # of the list. These steps will only be run once, if they haven't been |
| # run before. |
| # |
| # E.g.: |
| # $(call add-clean-step, touch -c external/sqlite/sqlite3.h) |
| # $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates) |
| # |
| # Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with |
| # files that are missing or have been moved. |
| # |
| # Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory. |
| # Use $(OUT_DIR) to refer to the "out" directory. |
| # |
| # If you need to re-do something that's already mentioned, just copy |
| # the command and add it to the bottom of the list. E.g., if a change |
| # that you made last week required touching a file and a change you |
| # made today requires touching the same file, just copy the old |
| # touch step and add it to the end of the list. |
| # |
| # ************************************************ |
| # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST |
| # ************************************************ |
| |
| # For example: |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates) |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates) |
| #$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f) |
| #$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/init.power.sh) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/init.radio.sh) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/init.$(PRODUCT_HARDWARE).rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/init.wahoo.usb.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/init.$(PRODUCT_HARDWARE).diag.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/ueventd.$(PRODUCT_HARDWARE).rc) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.camera.flash-autofocus.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.camera.front.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.camera.full.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.camera.raw.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.bluetooth.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.bluetooth_le.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.accelerometer.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.compass.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.gyroscope.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.light.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.proximity.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.barometer.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.stepcounter.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.stepdetector.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.sensor.hifi_sensors.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.location.gps.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.telephony.gsm.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.telephony.cdma.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.wifi.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.wifi.direct.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.wifi.passpoint.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.software.sip.voip.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.usb.accessory.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.usb.host.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.opengles.aep.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.nfc.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.nfc.hce.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.nfc.hcef.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.vr.headtracking.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.vr.high_performance.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.vulkan.level.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.hardware.vulkan.version.xml) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/wifi/wpa_supplicant_overlay.conf) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/wifi/p2p_supplicant_overlay.conf) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/wifi/wifi_concurrency_cfg.txt) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/hw/lights.$(PRODUCT_HARDWARE).so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/hw/lights.$(PRODUCT_HARDWARE).so) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/sec_config) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/audio_policy_configuration.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/a2dp_audio_policy_configuration.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/usb_audio_policy_configuration.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/r_submix_audio_policy_configuration.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/audio_policy_volumes.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/default_volume_tables.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/mixer_paths.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/mixer_paths_tasha.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/mixer_paths_tavil.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/audio_platform_info.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/audio_platform_info_tavil.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/sound_trigger_platform_info.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/sound_trigger_mixer_paths_wcd9340.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/graphite_ipc_platform_info.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/media_codecs.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/media_codecs_performance.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/media_codecs_google_audio.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/media_codecs_google_telephony.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/media_codecs_google_video.xml) |
| |
| # Move /system/lib/vndk-sp to /system/lib/vndk-sp-26.1.0 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk-sp) |
| |
| # Revert: Move /system/lib/vndk-sp to /system/lib/vndk-sp-26.1.0 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp-*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk-sp-*) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/lowi.conf) |
| |
| # Vibrator HAL 1.0 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.0-service.wahoo.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.0-service.wahoo) |
| |
| # Broadcast Radio HAL impl 1.0 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.broadcastradio@1.0-impl.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.broadcastradio@1.0-impl.so) |
| |
| # Revert /system/lib[64]/vndk-sp/libz.so |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libz.vndk-sp_*) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/vndk-sp/libz.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib64/vndk-sp/libz.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp/libz.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk-sp/libz.so) |
| |
| # Remove eSIM OTA image |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/EuiccGoogle/esim.img) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/EuiccGoogle/esim2.img) |
