blob: 5082add65bc732b8f0a50b5a7d2eb5a7f5a0be6d [file] [log] [blame]
#
# Copyright (C) 2019 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
LOCAL_PATH := device/google/sunfish
PRODUCT_VENDOR_MOVE_ENABLED := true
TARGET_BOARD_PLATFORM := sm6150
MSMSTEPPE := sm6150
PRODUCT_SOONG_NAMESPACES += \
device/google/sunfish \
hardware/google/av \
hardware/google/camera \
hardware/google/interfaces \
hardware/google/pixel \
hardware/qcom/sm8150/display \
hardware/qcom/sm8150/data/ipacfg-mgr \
hardware/qcom/sm8150/gps \
vendor/google/camera \
vendor/qcom/sm8150 \
vendor/qcom/sm8150/proprietary/commonsys/telephony-apps/DataStatusNotification \
vendor/qcom/sm8150/proprietary/gps \
vendor/qcom/sm8150/codeaurora/location \
vendor/google/interfaces
# Include sensors soong namespace
PRODUCT_SOONG_NAMESPACES += \
vendor/qcom/sensors \
vendor/google/tools/sensors
# Single vendor RIL/Telephony/data with SM7250
DEVICE_USES_SM7250_QCRIL_TELEPHONY := true
ifeq ($(DEVICE_USES_SM7250_QCRIL_TELEPHONY), true)
PRODUCT_SOONG_NAMESPACES += \
vendor/qcom/sm7250/codeaurora/commonsys/telephony/ims/ims-ext-common \
vendor/qcom/sm7250/codeaurora/dataservices/rmnetctl \
vendor/qcom/sm7250/proprietary/commonsys/qcrilOemHook \
vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/ims \
vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/QtiTelephonyService \
vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/xdivert \
vendor/qcom/sm7250/proprietary/qcril-data-hal \
vendor/qcom/sm7250/proprietary/qcril-hal \
vendor/qcom/sm7250/proprietary/data
else
$(warning DEVICE_USES_SM7250_QCRIL_TELEPHONY is disabled)
PRODUCT_SOONG_NAMESPACES += \
vendor/qcom/sm7150/codeaurora/commonsys/telephony/ims \
vendor/qcom/sm7150/proprietary/qcril-data-hal \
vendor/qcom/sm7150/proprietary/qcril-hal
endif
PRODUCT_PROPERTY_OVERRIDES += \
keyguard.no_require_sim=true
# enable cal by default on accel sensor
PRODUCT_PRODUCT_PROPERTIES += \
persist.debug.sensors.accel_cal=1
# The default value of this variable is false and should only be set to true when
# the device allows users to retain eSIM profiles after factory reset of user data.
PRODUCT_PRODUCT_PROPERTIES += \
masterclear.allow_retain_esim_profiles_after_fdr=true
PRODUCT_COPY_FILES += \
device/google/sunfish/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \
device/google/sunfish/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml \
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.software.verified_boot.xml
# Enforce privapp-permissions whitelist
PRODUCT_PROPERTY_OVERRIDES += \
ro.control_privapp_permissions=enforce
PRODUCT_PACKAGES += \
messaging
TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop
$(call inherit-product, $(LOCAL_PATH)/utils.mk)
# Installs gsi keys into ramdisk, to boot a developer GSI with verified boot.
$(call inherit-product, $(SRC_TARGET_DIR)/product/developer_gsi_keys.mk)
ifeq ($(wildcard vendor/google_devices/sunfish/proprietary/device-vendor-sunfish.mk),)
BUILD_WITHOUT_VENDOR := true
endif
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := device/google/sunfish-kernel/Image.lz4
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
PRODUCT_VENDOR_KERNEL_HEADERS := device/google/sunfish-kernel/sm7150/kernel-headers
PRODUCT_CHARACTERISTICS := nosdcard
PRODUCT_SHIPPING_API_LEVEL := 29
DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel \
$(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_RECOVERY)/root/first_stage_ramdisk/fstab.$(PRODUCT_PLATFORM) \
$(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.$(PRODUCT_PLATFORM) \
$(LOCAL_PATH)/init.hardware.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).rc \
$(LOCAL_PATH)/init.power.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).power.rc \
$(LOCAL_PATH)/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \
$(LOCAL_PATH)/uinput-fpc.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/uinput-fpc.kl \
$(LOCAL_PATH)/uinput-fpc.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/uinput-fpc.idc \
$(LOCAL_PATH)/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).usb.rc \
$(LOCAL_PATH)/init.sensors.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.sensors.sh \
$(LOCAL_PATH)/thermal-engine-$(PRODUCT_HARDWARE).conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-$(PRODUCT_HARDWARE).conf \
$(LOCAL_PATH)/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc \
$(LOCAL_PATH)/init.ramoops.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.ramoops.sh \
MSM_VIDC_TARGET_LIST := sm6150 # Get the color format from kernel headers
MASTER_SIDE_CP_TARGET_LIST := sm6150 # ION specific settings
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.diag.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.mpssrfs.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.chamber.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).chamber.rc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.ipa.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).ipa.rc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.power_debug.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).power_debug.rc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.userdebug.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).userdebug.rc
else
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.diag.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.hardware.mpssrfs.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
endif
# Enable DIAG issue debug
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.diagdebug.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.diagdebug.rc
endif
# A/B support
PRODUCT_PACKAGES += \
otapreopt_script \
cppreopts.sh \
update_engine \
update_verifier
PRODUCT_PACKAGES += \
e2fsck_ramdisk \
tune2fs_ramdisk \
resize2fs_ramdisk
# Use Sdcardfs
PRODUCT_PRODUCT_PROPERTIES += \
ro.sys.sdcardfs=1
PRODUCT_PACKAGES += \
bootctrl.sm6150 \
bootctrl.sm6150.recovery
PRODUCT_PROPERTY_OVERRIDES += \
ro.cp_system_other_odex=1
AB_OTA_POSTINSTALL_CONFIG += \
RUN_POSTINSTALL_system=true \
POSTINSTALL_PATH_system=system/bin/otapreopt_script \
FILESYSTEM_TYPE_system=ext4 \
POSTINSTALL_OPTIONAL_system=true
PRODUCT_PACKAGES += \
update_engine_sideload \
sg_write_buffer \
f2fs_io \
check_f2fs
AB_OTA_POSTINSTALL_CONFIG += \
RUN_POSTINSTALL_vendor=true \
POSTINSTALL_PATH_vendor=bin/checkpoint_gc \
FILESYSTEM_TYPE_vendor=ext4 \
POSTINSTALL_OPTIONAL_vendor=true
PRODUCT_PROPERTY_OVERRIDES += \
ro.crypto.volume.filenames_mode=aes-256-cts
# Userdata Checkpointing OTA GC
PRODUCT_PACKAGES += \
checkpoint_gc
# The following modules are included in debuggable builds only.
PRODUCT_PACKAGES_DEBUG += \
bootctl \
r.vendor \
update_engine_client
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \
frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\
frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\
frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \
frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \
frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \
frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \
frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \
frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \
frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \
frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml \
frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
frameworks/native/data/etc/android.hardware.context_hub.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.context_hub.xml \
frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \
frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \
frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \
frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \
frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/android.hardware.reboot_escrow.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.reboot_escrow.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \
frameworks/native/data/etc/android.software.vulkan.deqp.level-2020-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level.xml \
frameworks/native/data/etc/android.hardware.telephony.carrierlock.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.carrierlock.xml \
frameworks/native/data/etc/android.hardware.strongbox_keystore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.strongbox_keystore.xml \
frameworks/native/data/etc/android.software.ipsec_tunnels.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.ipsec_tunnels.xml \
frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml
# Audio fluence, ns, aec property, voice and media volume steps
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.audio.sdk.fluencetype=fluencepro \
persist.vendor.audio.fluence.voicecall=true \
persist.vendor.audio.fluence.speaker=true \
persist.vendor.audio.fluence.voicecomm=true \
persist.vendor.audio.fluence.voicerec=false \
ro.config.vc_call_vol_steps=7 \
ro.config.media_vol_steps=25 \
# Audio Features
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.feature.external_dsp.enable=true \
vendor.audio.feature.external_speaker.enable=true \
vendor.audio.feature.concurrent_capture.enable=false \
vendor.audio.feature.a2dp_offload.enable=true \
vendor.audio.feature.hfp.enable=true \
vendor.audio.feature.hwdep_cal.enable=true \
vendor.audio.feature.incall_music.enable=true \
vendor.audio.feature.maxx_audio.enable=true \
vendor.audio.feature.spkr_prot.enable=true \
vendor.audio.feature.usb_offload.enable=true \
vendor.audio.feature.audiozoom.enable=true \
vendor.audio.feature.snd_mon.enable=true \
vendor.audio.feature.multi_voice_session.enable=true \
vendor.audio.capture.enforce_legacy_copp_sr=true \
vendor.audio.offload.buffer.size.kb=256 \
persist.vendor.audio_hal.dsp_bit_width_enforce_mode=24 \
vendor.audio.offload.gapless.enabled=true \
# MaxxAudio effect and add rotation monitor
PRODUCT_PROPERTY_OVERRIDES += \
ro.audio.monitorRotation=true
# Iaxxx streming and factory binary
PRODUCT_PACKAGES += \
libtunnel \
libodsp \
adnc_strm.primary.default
# graphics
PRODUCT_PROPERTY_OVERRIDES += \
ro.opengles.version=196610
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.display.foss=1 \
ro.vendor.display.paneltype=2 \
ro.vendor.display.sensortype=2 \
vendor.display.foss.config=1 \
vendor.display.foss.config_path=/vendor/etc/FOSSConfig.xml \
vendor.display.qdcm.mode_combine=1
# camera hal buffer management
PRODUCT_PROPERTY_OVERRIDES += \
persist.camera.managebuffer.enable=1
# camera google face detection
PRODUCT_PROPERTY_OVERRIDES += \
persist.camera.googfd.enable=1
# Lets the vendor library that Google Camera HWL is enabled
PRODUCT_PROPERTY_OVERRIDES += \
persist.camera.google_hwl.enabled=true \
persist.camera.google_hwl.name=libgooglecamerahwl_impl.so
# camera common HWL
CAMERA_COMMON_HWL := true
# OEM Unlock reporting
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
ro.oem_unlock_supported=1
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.cne.feature=1 \
persist.vendor.data.iwlan.enable=true \
persist.vendor.radio.RATE_ADAPT_ENABLE=1 \
persist.vendor.radio.ROTATION_ENABLE=1 \
persist.vendor.radio.VT_ENABLE=1 \
persist.vendor.radio.VT_HYBRID_ENABLE=1 \
persist.vendor.radio.apm_sim_not_pwdn=1 \
persist.vendor.radio.custom_ecc=1 \
persist.vendor.radio.data_ltd_sys_ind=1 \
persist.vendor.radio.videopause.mode=1 \
persist.vendor.radio.mt_sms_ack=30 \
persist.vendor.radio.multisim_switch_support=true \
persist.vendor.radio.sib16_support=1 \
persist.vendor.radio.data_con_rprt=true \
persist.vendor.radio.relay_oprt_change=1 \
persist.vendor.radio.no_wait_for_card=1 \
persist.vendor.radio.sap_silent_pin=1 \
persist.vendor.radio.manual_nw_rej_ct=1 \
persist.rcs.supported=1 \
vendor.rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so \
ro.hardware.keystore_desede=true \
ro.telephony.iwlan_operation_mode=legacy \
persist.vendor.radio.procedure_bytes=SKIP \
# Enable reboot free DSDS
PRODUCT_PRODUCT_PROPERTIES += \
persist.radio.reboot_on_modem_change=false
PRODUCT_PROPERTY_OVERRIDES += \
telephony.active_modems.max_count=2
# Disable snapshot timer
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.radio.snapshot_enabled=0 \
persist.vendor.radio.snapshot_timer=0
PRODUCT_PACKAGES += \
hwcomposer.sm6150 \
android.hardware.graphics.composer@2.4-service-sm8150 \
gralloc.sm6150 \
android.hardware.graphics.mapper@3.0-impl-qti-display \
vendor.qti.hardware.display.allocator-service
# RenderScript HAL
PRODUCT_PACKAGES += \
android.hardware.renderscript@1.0-impl
# Light HAL
PRODUCT_PACKAGES += \
lights.sm6150 \
hardware.google.light@1.1-service
# Memtrack HAL
PRODUCT_PACKAGES += \
memtrack.sm6150 \
android.hardware.memtrack@1.0-impl \
android.hardware.memtrack@1.0-service
# Bluetooth HAL
PRODUCT_PACKAGES += \
android.hardware.bluetooth@1.0-impl-qti \
android.hardware.bluetooth@1.0-service-qti
#Bluetooth SAR HAL
PRODUCT_PACKAGES += \
vendor.qti.hardware.bluetooth_sar@1.0-impl \
vendor.qti.hardware.bluetooth_sar@1.1-impl
PRODUCT_PACKAGES_DEBUG += \
bluetooth_sar_test
# Bluetooth AFH
PRODUCT_PACKAGES += \
vendor.qti.hardware.bt_channel_avoidance@1.0-impl
# Bluetooth SoC
PRODUCT_PROPERTY_OVERRIDES += \
vendor.qcom.bluetooth.soc=cherokee
# Property for loading BDA from device tree
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.bt.bdaddr_path=/proc/device-tree/chosen/cdt/cdb2/bt_addr
# Bluetooth WiPower
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.bluetooth.emb_wp_mode=false \
ro.vendor.bluetooth.wipower=false
# DRM HAL
PRODUCT_PACKAGES += \
android.hardware.drm@1.0-impl \
android.hardware.drm@1.0-service \
android.hardware.drm@1.3-service.clearkey \
android.hardware.drm@1.3-service.widevine
# NFC and Secure Element packages
PRODUCT_PACKAGES += \
NfcNci \
Tag \
SecureElement \
android.hardware.nfc@1.2-service.st \
android.hardware.secure_element@1.0-service.st
PRODUCT_COPY_FILES += \
device/google/sunfish/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/sunfish/nfc/libese-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-hal-st.conf \
device/google/sunfish/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
android.hardware.usb@1.2-service.sunfish
PRODUCT_PACKAGES += \
android.hardware.health@2.1-impl-sunfish \
android.hardware.health@2.1-service
# Storage health HAL
PRODUCT_PACKAGES += \
android.hardware.health.storage@1.0-service
PRODUCT_PACKAGES += \
libmm-omxcore \
libOmxCore \
libstagefrighthw \
libOmxVdec \
libOmxVdecHevc \
libOmxVenc \
libc2dcolorconvert
# Enable Codec 2.0
PRODUCT_PACKAGES += \
libqcodec2 \
vendor.qti.media.c2@1.0-service \
media_codecs_c2.xml \
codec2.vendor.ext.policy \
codec2.vendor.base.policy
PRODUCT_PROPERTY_OVERRIDES += \
debug.stagefright.omx_default_rank=512
# Create input surface on the framework side
PRODUCT_PROPERTY_OVERRIDES += \
debug.stagefright.c2inputsurface=-1 \
# Disable OMX
PRODUCT_PROPERTY_OVERRIDES += \
vendor.media.omx=0 \
# Enable ECO service
QC2_HAVE_ECO_SERVICE := true
PRODUCT_PROPERTY_OVERRIDES += \
vendor.qc2.venc.avgqp.enable=1
# To reach target bitrate in CBR mode for IMS VT Call
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ims.mm_minqp=1
PRODUCT_PACKAGES += \
android.hardware.camera.provider@2.6-impl-google \
android.hardware.camera.provider@2.6-service-google \
camera.sm6150 \
libgooglecamerahwl_impl \
libqomx_core \
libmmjpeg_interface \
libmmcamera_interface \
libcameradepthcalibrator
# Google Camera HAL test libraries in debug builds
PRODUCT_PACKAGES_DEBUG += \
libgoogle_camera_hal_proprietary_tests \
libgoogle_camera_hal_tests.vendor
PRODUCT_PACKAGES += \
sensors.$(PRODUCT_HARDWARE) \
android.hardware.sensors@2.0-service.multihal \
hals.conf
PRODUCT_PACKAGES += \
fs_config_dirs \
fs_config_files
# Context hub HAL
PRODUCT_PACKAGES += \
android.hardware.contexthub@1.1-service.generic
# Boot control HAL
PRODUCT_PACKAGES += \
android.hardware.boot@1.1-impl-pixel-legacy \
android.hardware.boot@1.1-impl-pixel-legacy.recovery \
android.hardware.boot@1.1-service \
# Vibrator HAL
PRODUCT_PACKAGES += \
android.hardware.vibrator@1.3-service.sunfish \
# DRV2624 Haptics Waveform
PRODUCT_COPY_FILES += \
device/google/sunfish/vibrator/drv2624/drv2624.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/drv2624.bin
# Vibrator HAL
PRODUCT_PRODUCT_PROPERTIES +=\
ro.vendor.vibrator.hal.config.dynamic=1 \
ro.vendor.vibrator.hal.click.duration=6 \
ro.vendor.vibrator.hal.tick.duration=6 \
ro.vendor.vibrator.hal.heavyclick.duration=6 \
ro.vendor.vibrator.hal.short.voltage=161 \
ro.vendor.vibrator.hal.long.voltage=161 \
ro.vendor.vibrator.hal.long.frequency.shift=10 \
ro.vendor.vibrator.hal.steady.shape=1 \
ro.vendor.vibrator.hal.lptrigger=0
# Thermal HAL config
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/thermal_info_config_$(PRODUCT_HARDWARE).json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
#GNSS HAL
PRODUCT_PACKAGES += \
libgps.utils \
libgnss \
libloc_core \
liblocation_api \
libbatching \
libgeofencing \
android.hardware.gnss@2.0-impl-qti \
android.hardware.gnss@2.0-service-qti
# Wireless Charger HAL
PRODUCT_PACKAGES += \
vendor.google.wireless_charger@1.0
ENABLE_VENDOR_RIL_SERVICE := true
HOSTAPD := hostapd
HOSTAPD += hostapd_cli
PRODUCT_PACKAGES += $(HOSTAPD)
WPA := wpa_supplicant.conf
WPA += wpa_supplicant_wcn.conf
WPA += wpa_supplicant
PRODUCT_PACKAGES += $(WPA)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += wpa_cli
endif
# Wifi
PRODUCT_PACKAGES += \
android.hardware.wifi@1.0-service \
wificond \
libwpa_client \
WifiOverlay
# WLAN driver configuration files
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \
$(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
$(LOCAL_PATH)/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \
$(LOCAL_PATH)/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini \
LIB_NL := libnl_2
PRODUCT_PACKAGES += $(LIB_NL)
# Audio effects
PRODUCT_PACKAGES += \
libvolumelistener \
libqcomvisualizer \
libqcomvoiceprocessing \
libqcomvoiceprocessingdescriptors \
libqcompostprocbundle
PRODUCT_PACKAGES += \
audio.primary.sm6150 \
audio.a2dp.default \
audio.usb.default \
audio.r_submix.default \
libaudio-resampler \
audio.hearing_aid.default \
audio.bluetooth.default
PRODUCT_PACKAGES += \
android.hardware.audio@6.0-impl:32 \
android.hardware.audio.effect@6.0-impl:32 \
android.hardware.soundtrigger@2.3-impl \
android.hardware.bluetooth.audio@2.0-impl \
android.hardware.audio@2.0-service
# Modules for Audio HAL
PRODUCT_PACKAGES += \
libcirrusspkrprot \
libsndmonitor \
libmalistener \
liba2dpoffload \
btaudio_offload_if \
libmaxxaudio \
libaudiozoom
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
tinyplay \
tinycap \
tinymix \
tinypcminfo \
cplay
endif
# Audio hal xmls
# Audio Policy tables
# Audio ACDB data
# Audio ACDB workspace files for QACT
# Audio speaker tunning config data
# Audio audiozoom config data
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
$(LOCAL_PATH)/media_codecs_omx.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_omx.xml \
$(LOCAL_PATH)/media_codecs_performance_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_c2.xml \
frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
$(LOCAL_PATH)/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
# Vendor seccomp policy files for media components:
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy
PRODUCT_PROPERTY_OVERRIDES += \
vendor.audio.snd_card.open.retries=50
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# Subsystem ramdump
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.sys.ssr.enable_ramdumps=1
endif
# Subsystem silent restart
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.sys.ssr.restart_level=modem,adsp,slpi
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# Sensor debug flag
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.debug.ash.logger=0 \
persist.vendor.debug.ash.logger.time=0
endif
# setup dalvik vm configs
$(call inherit-product, frameworks/native/build/phone-xhdpi-6144-dalvik-heap.mk)
# Use the default charger mode images
PRODUCT_PACKAGES += \
charger_res_images
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# b/36703476: Set default log size to 1M
PRODUCT_PROPERTY_OVERRIDES += \
ro.logd.size=1M
# b/114766334: persist all logs by default rotating on 30 files of 1MiB
PRODUCT_PROPERTY_OVERRIDES += \
logd.logpersistd=logcatd \
logd.logpersistd.size=30
endif
# Dumpstate HAL
PRODUCT_PACKAGES += \
android.hardware.dumpstate@1.1-service.sunfish
# Citadel
PRODUCT_PACKAGES += \
citadeld \
citadel_updater \
android.hardware.authsecret@1.0-service.citadel \
android.hardware.oemlock@1.0-service.citadel \
android.hardware.weaver@1.0-service.citadel \
android.hardware.keymaster@4.1-service.citadel \
android.hardware.identity@1.0-service.citadel \
wait_for_strongbox
# Citadel debug stuff
PRODUCT_PACKAGES_DEBUG += \
test_citadel
# Storage: for factory reset protection feature
PRODUCT_PROPERTY_OVERRIDES += \
ro.frp.pst=/dev/block/bootdevice/by-name/frp
PRODUCT_PACKAGES += \
vndk-sp
# Override heap growth limit due to high display density on device
PRODUCT_PROPERTY_OVERRIDES += \
dalvik.vm.heapgrowthlimit=256m
# Use 64-bit dex2oat for better dexopt time.
PRODUCT_PROPERTY_OVERRIDES += \
dalvik.vm.dex2oat64.enabled=true
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:system_ext/lib/android.hidl.base@1.0.so \
$(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:system_ext/lib64/android.hidl.base@1.0.so \
$(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:vendor/lib/android.hidl.base@1.0.so \
$(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:vendor/lib64/android.hidl.base@1.0.so \
PRODUCT_PACKAGES += \
ipacm \
IPACM_cfg.xml
#Set default CDMA subscription to RUIM
PRODUCT_PROPERTY_OVERRIDES += \
ro.telephony.default_cdma_sub=0
# Set network mode to Global by default and no DSDS/DSDA
PRODUCT_PROPERTY_OVERRIDES += ro.telephony.default_network=10
# Set display color mode to Adaptive by default
PRODUCT_PROPERTY_OVERRIDES += \
persist.sys.sf.color_saturation=1.0 \
persist.sys.sf.native_mode=2 \
persist.sys.sf.color_mode=9
# Keymaster configuration
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml \
frameworks/native/data/etc/android.hardware.device_unique_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.device_unique_attestation.xml
# Enable modem logging
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.radio.log_loc="/data/vendor/modem_dump" \
ro.vendor.radio.log_prefix="modem_log_"
# Enable modem logging for debug
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.sys.modem.diag.mdlog=true
else
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.sys.modem.diag.mdlog=false
endif
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.sys.modem.diag.mdlog_br_num=5
# Preopt SystemUI
PRODUCT_DEXPREOPT_SPEED_APPS += \
SystemUIGoogle
# Enable stats logging in LMKD
TARGET_LMKD_STATS_LOG := true
PRODUCT_PRODUCT_PROPERTIES += \
ro.lmk.log_stats=true
# default usb oem functions
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.usb.usbradio.config=diag
endif
# Enable app/sf phase offset as durations. The numbers below are translated from the existing
# positive offsets by finding the duration app/sf will have with the offsets.
# For SF the previous value was 6ms which under 16.6ms vsync time (60Hz) will leave SF with ~10.5ms
# for each frame. For App the previous value was 2ms which under 16.6ms vsync time will leave the
# App with ~20.5ms (16.6ms * 2 - 10.5ms - 2ms). The other values were calculated similarly.
# Full comparison between the old vs. the new values are captured in
# https://docs.google.com/spreadsheets/d/1a_5cVNY3LUAkeg-yL56rYQNwved6Hy-dvEcKSxp6f8k/edit
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.use_phase_offsets_as_durations=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.sf.duration=10500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.app.duration=20500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.sf.duration=21000000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.app.duration=16500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.sf.duration=13500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.app.duration=21000000
# Enable backpressure for GL comp
PRODUCT_PROPERTY_OVERRIDES += \
debug.sf.enable_gl_backpressure=1
# Do not skip init trigger by default
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
vendor.skip.init=0
BOARD_USES_QCNE := true
#per device
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/sunfish/init.sunfish.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.sunfish.rc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config
# GPS configuration file
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf
# Pixel atrace HAL
PRODUCT_PACKAGES += \
android.hardware.atrace@1.0-service.pixel
# Fingerprint
PRODUCT_PACKAGES += \
android.hardware.biometrics.fingerprint@2.1-service.fpc
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.fingerprint.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.fingerprint.sh
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.fingerprint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.fingerprint.xml
# Reliability reporting
PRODUCT_PACKAGES += \
pixelstats-vendor
PRODUCT_USE_DYNAMIC_PARTITIONS := true
# fastbootd
PRODUCT_PACKAGES += \
android.hardware.fastboot@1.0-impl.pixel \
fastbootd
# insmod files
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.insmod.sunfish.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.sunfish.cfg
# Use /product/etc/fstab.postinstall to mount system_other
PRODUCT_PRODUCT_PROPERTIES += \
ro.postinstall.fstab.prefix=/product
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall
# powerstats HAL
PRODUCT_PACKAGES += \
android.hardware.power.stats@1.0-service.pixel
# Resume on Reboot support
PRODUCT_PACKAGES += \
android.hardware.rebootescrow-service.citadel
# Recovery
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/init.recovery.device.rc:recovery/root/init.recovery.sunfish.rc
QTI_TELEPHONY_UTILS := qti-telephony-utils
QTI_TELEPHONY_UTILS += qti_telephony_utils.xml
PRODUCT_PACKAGES += $(QTI_TELEPHONY_UTILS)
HIDL_WRAPPER := qti-telephony-hidl-wrapper
HIDL_WRAPPER += qti_telephony_hidl_wrapper.xml
PRODUCT_PACKAGES += $(HIDL_WRAPPER)
# Increment the SVN for any official public releases
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.build.svn=24
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
# Vendor verbose logging default property
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.verbose_logging_enabled=true
else
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.verbose_logging_enabled=false
endif
-include vendor/qcom/sm8150/proprietary/commonsys-intf/data/data_commonsys-intf_system_product.mk
-include vendor/qcom/sm8150/proprietary/commonsys-intf/data/data_commonsys-intf_vendor_product.mk
# Security
-include vendor/qcom/sm8150/proprietary/securemsm/config/keymaster_vendor_proprietary_board.mk
-include vendor/qcom/sm8150/proprietary/securemsm/config/keymaster_vendor_proprietary_product.mk
# Project
include hardware/google/pixel/common/pixel-common-device.mk
# Factory OTA
-include vendor/google/factoryota/client/factoryota.mk
-include vendor/qcom/sm8150/proprietary/securemsm/config/cpz_vendor_proprietary_board.mk
-include vendor/qcom/sm8150/proprietary/securemsm/config/cpz_vendor_proprietary_product.mk
-include vendor/qcom/sm8150/proprietary/securemsm/config/smcinvoke_vendor_proprietary_product.mk
-include vendor/qcom/sm8150/proprietary/commonsys/securemsm/securemsm_system_product.mk
# storage
-include hardware/google/pixel/pixelstats/device.mk
# power HAL
-include hardware/google/pixel/power-libperfmgr/aidl/device.mk
# mm_event
-include hardware/google/pixel/mm/device_legacy.mk
# thermal
-include hardware/google/pixel/thermal/device.mk
# enable retrofit virtual A/B
$(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota_retrofit.mk)