#
# Copyright (C) 2018 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# define hardware platform
PRODUCT_PLATFORM := sm7250

LOCAL_PATH := device/google/redbull

# Enable userspace reboot
$(call inherit-product, $(SRC_TARGET_DIR)/product/userspace_reboot.mk)

PRODUCT_VENDOR_MOVE_ENABLED := true
TARGET_BOARD_PLATFORM := lito

PRODUCT_SOONG_NAMESPACES += \
    hardware/google/av \
    hardware/google/camera \
    hardware/google/interfaces \
    hardware/google/pixel \
    device/google/redbull \
    hardware/qcom/sm7250 \
    vendor/google/airbrush/floral \
    vendor/google/biometrics/face \
    vendor/google/darwinn \
    hardware/qcom/sm7250/display \
    vendor/google/camera \
    vendor/qcom/sm7250 \
    vendor/google/interfaces

# Single vendor RIL/Telephony/data with SM7250
  PRODUCT_SOONG_NAMESPACES += \
      vendor/qcom/sm7250/codeaurora/commonsys/telephony/ims/ims-ext-common \
      vendor/qcom/sm7250/proprietary/commonsys/qcrilOemHook \
      vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/ims \
      vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/QtiTelephonyService \
      vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/xdivert \
      vendor/qcom/sm7250/proprietary/qcril-data-hal \
      vendor/qcom/sm7250/proprietary/qcril-hal

PRODUCT_PROPERTY_OVERRIDES += \
    keyguard.no_require_sim=true

# enable cal by default on accel sensor
PRODUCT_PRODUCT_PROPERTIES += \
    persist.vendor.debug.sensors.accel_cal=1

# The default value of this variable is false and should only be set to true when
# the device allows users to retain eSIM profiles after factory reset of user data.
PRODUCT_PRODUCT_PROPERTIES += \
    masterclear.allow_retain_esim_profiles_after_fdr=true

PRODUCT_COPY_FILES += \
    device/google/redbull/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \
    device/google/redbull/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml \
    frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
    frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.software.verified_boot.xml

PRODUCT_PACKAGES += \
    messaging \
    dmabuf_dump

TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop

$(call inherit-product, $(LOCAL_PATH)/utils.mk)

# Installs gsi keys into ramdisk, to boot a developer GSI with verified boot.
$(call inherit-product, $(SRC_TARGET_DIR)/product/developer_gsi_keys.mk)

PRODUCT_CHARACTERISTICS := nosdcard
PRODUCT_SHIPPING_API_LEVEL := 28

DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay

PRODUCT_COPY_FILES += \
    $(LOCAL_KERNEL):kernel \
    $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_RECOVERY)/root/first_stage_ramdisk/fstab.$(PRODUCT_PLATFORM) \
    $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.$(PRODUCT_PLATFORM) \
    $(LOCAL_PATH)/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist \
    $(LOCAL_PATH)/init.hardware.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).rc \
    $(LOCAL_PATH)/init.modem.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.modem.sh \
    $(LOCAL_PATH)/init.power.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).power.rc \
    $(LOCAL_PATH)/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \
    $(LOCAL_PATH)/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).usb.rc \
    $(LOCAL_PATH)/init.insmod.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.insmod.sh \
    $(LOCAL_PATH)/init.sensors.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.sensors.sh \
    $(LOCAL_PATH)/sensors.hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf \
    $(LOCAL_PATH)/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc \
		$(LOCAL_PATH)/init.ramoops.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.ramoops.sh


MSM_VIDC_TARGET_LIST := lito # Get the color format from kernel headers
MASTER_SIDE_CP_TARGET_LIST := lito # ION specific settings

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
  PRODUCT_COPY_FILES += \
      $(LOCAL_PATH)/init.hardware.mpssrfs.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
  PRODUCT_COPY_FILES += \
      $(LOCAL_PATH)/init.hardware.diag.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
  PRODUCT_COPY_FILES += \
      $(LOCAL_PATH)/init.hardware.ipa.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).ipa.rc
else
  PRODUCT_COPY_FILES += \
      $(LOCAL_PATH)/init.hardware.mpssrfs.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
  PRODUCT_COPY_FILES += \
      $(LOCAL_PATH)/init.hardware.diag.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
endif

# A/B support
PRODUCT_PACKAGES += \
    otapreopt_script \
    cppreopts.sh \
    update_engine \
    update_verifier

# Use Sdcardfs
PRODUCT_PRODUCT_PROPERTIES += \
    ro.sys.sdcardfs=1

PRODUCT_PACKAGES += \
    bootctrl.lito \
    bootctrl.lito.recovery

PRODUCT_PROPERTY_OVERRIDES += \
    ro.cp_system_other_odex=1

AB_OTA_POSTINSTALL_CONFIG += \
    RUN_POSTINSTALL_system=true \
    POSTINSTALL_PATH_system=system/bin/otapreopt_script \
    FILESYSTEM_TYPE_system=ext4 \
    POSTINSTALL_OPTIONAL_system=true

PRODUCT_PACKAGES += \
    update_engine_sideload \
    sg_write_buffer \
    f2fs_io \
    check_f2fs

AB_OTA_POSTINSTALL_CONFIG += \
    RUN_POSTINSTALL_vendor=true \
    POSTINSTALL_PATH_vendor=bin/checkpoint_gc \
    FILESYSTEM_TYPE_vendor=ext4 \
    POSTINSTALL_OPTIONAL_vendor=true

# Userdata Checkpointing OTA GC
PRODUCT_PACKAGES += \
    checkpoint_gc

# Enable wider inodes for project quotas
# Later, replace with $(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)
PRODUCT_QUOTA_PROJID := 1
PRODUCT_PRODUCT_PROPERTIES += ro.emulated_storage.projid=1

# The following modules are included in debuggable builds only.
PRODUCT_PACKAGES_DEBUG += \
    bootctl \
    r.vendor \
    update_engine_client

PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \
    frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
    frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\
    frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\
    frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \
    frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \
    frameworks/native/data/etc/android.hardware.context_hub.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.context_hub.xml \
    frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \
    frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \
    frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \
    frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \
    frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
    frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
    frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
    frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \
    frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
    frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \
    frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml \
    frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
    frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
    frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \
    frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
    frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
    frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
    frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
    frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
    frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
    frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \
    frameworks/native/data/etc/android.software.vulkan.deqp.level-2020-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level.xml \
    frameworks/native/data/etc/android.hardware.telephony.carrierlock.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.carrierlock.xml \
    frameworks/native/data/etc/android.hardware.strongbox_keystore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.strongbox_keystore.xml \
    frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
    frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
    frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
    frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml

# Audio fluence, ns, aec property, voice and media volume steps
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.audio.sdk.fluencetype=fluencepro \
    persist.vendor.audio.fluence.voicecall=true \
    persist.vendor.audio.fluence.speaker=true \
    persist.vendor.audio.fluence.voicecomm=true \
    persist.vendor.audio.fluence.voicerec=false \
    ro.config.vc_call_vol_steps=7 \
    ro.config.media_vol_steps=25 \

# Audio Features
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.audio.feature.external_dsp.enable=true \
    vendor.audio.feature.external_speaker.enable=true \
    vendor.audio.feature.concurrent_capture.enable=false \
    vendor.audio.feature.a2dp_offload.enable=true \
    vendor.audio.feature.hfp.enable=true \
    vendor.audio.feature.hwdep_cal.enable=true \
    vendor.audio.feature.incall_music.enable=true \
    vendor.audio.feature.maxx_audio.enable=true \
    vendor.audio.feature.spkr_prot.enable=true \
    vendor.audio.feature.usb_offload.enable=true \
    vendor.audio.feature.audiozoom.enable=true \
    vendor.audio.feature.snd_mon.enable=true \
    vendor.audio.feature.multi_voice_session.enable=true \
    vendor.audio.capture.enforce_legacy_copp_sr=true \
    vendor.audio.offload.buffer.size.kb=256 \
    persist.vendor.audio_hal.dsp_bit_width_enforce_mode=24 \

# MaxxAudio effect and add rotation monitor
PRODUCT_PROPERTY_OVERRIDES += \
    ro.audio.monitorRotation=true

# Iaxxx streming and factory binary
PRODUCT_PACKAGES += \
    libtunnel \
    libodsp \
    adnc_strm.primary.default \
    sound_trigger.primary.lito

# Add Oslo test for debug rom
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
    tunneling_hal_test \
    sensor_param_test \
    oslo_config_test \
    odsp_api_test \
    crash_event_logger \
    dump_debug_info \
    get_pwr_stats \
    crash_trigger_test
endif

# graphics
PRODUCT_PROPERTY_OVERRIDES += \
    ro.opengles.version=196610

PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.display.foss=1 \
    ro.vendor.display.paneltype=2 \
    ro.vendor.display.sensortype=2 \
    vendor.display.foss.config=1 \
    vendor.display.foss.config_path=/vendor/etc/FOSSConfig.xml \
    vendor.display.enable_async_powermode=0

# camera google face detection
PRODUCT_PROPERTY_OVERRIDES += \
    persist.camera.googfd.enable=1

# camera disable FaceSSD temporarily
PRODUCT_PROPERTY_OVERRIDES += \
    persist.camera.facessd.enable=0

# camera hal buffer management
PRODUCT_PROPERTY_OVERRIDES += \
    persist.camera.managebuffer.enable=1

# Lets the vendor library that Google Camera HWL is enabled
PRODUCT_PROPERTY_OVERRIDES += \
    persist.camera.google_hwl.enabled=true \
    persist.camera.google_hwl.name=libgooglecamerahwl_impl.so

# camera common HWL
CAMERA_COMMON_HWL := true

# OEM Unlock reporting
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    ro.oem_unlock_supported=1

PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.cne.feature=1 \
    persist.vendor.data.iwlan.enable=true \
    persist.vendor.radio.RATE_ADAPT_ENABLE=1 \
    persist.vendor.radio.ROTATION_ENABLE=1 \
    persist.vendor.radio.VT_ENABLE=1 \
    persist.vendor.radio.VT_HYBRID_ENABLE=1 \
    persist.vendor.radio.apm_sim_not_pwdn=1 \
    persist.vendor.radio.custom_ecc=1 \
    persist.vendor.radio.data_ltd_sys_ind=1 \
    persist.vendor.radio.videopause.mode=1 \
    persist.vendor.radio.multisim_switch_support=true \
    persist.vendor.radio.sib16_support=1 \
    persist.vendor.radio.data_con_rprt=true \
    persist.vendor.radio.relay_oprt_change=1 \
    persist.vendor.radio.no_wait_for_card=1 \
    persist.vendor.radio.sap_silent_pin=1 \
    persist.vendor.radio.manual_nw_rej_ct=1 \
    persist.rcs.supported=1 \
    vendor.rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so \
    ro.hardware.keystore_desede=true \
    persist.vendor.radio.procedure_bytes=SKIP \
    persist.vendor.radio.hidl_dev_service=true \

# Disable snapshot timer
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.radio.snapshot_enabled=0 \
    persist.vendor.radio.snapshot_timer=0

# RenderScript HAL
PRODUCT_PACKAGES += \
    android.hardware.renderscript@1.0-impl

# Light HAL
PRODUCT_PACKAGES += \
    lights.lito \
    hardware.google.light@1.0-service

# Memtrack HAL
PRODUCT_PACKAGES += \
    memtrack.lito \
    android.hardware.memtrack@1.0-impl \
    android.hardware.memtrack@1.0-service

# Bluetooth HAL
PRODUCT_PACKAGES += \
    android.hardware.bluetooth@1.0-impl-qti \
    android.hardware.bluetooth@1.0-service-qti

#Bluetooth SAR HAL
PRODUCT_PACKAGES += \
    vendor.qti.hardware.bluetooth_sar@1.0-impl
PRODUCT_PACKAGES_DEBUG += \
    bluetooth_sar_test

#Bluetooth AFH HAL
PRODUCT_PACKAGES += \
    vendor.qti.hardware.bt_channel_avoidance@1.0-impl

# Bluetooth SoC
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.qcom.bluetooth.soc=cherokee

# Property for loading BDA from device tree
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.bt.bdaddr_path=/proc/device-tree/chosen/cdt/cdb2/bt_addr

# Bluetooth WiPower
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.bluetooth.emb_wp_mode=false \
    ro.vendor.bluetooth.wipower=false

# DRM HAL
PRODUCT_PACKAGES += \
    android.hardware.drm@1.0-impl \
    android.hardware.drm@1.0-service \
    android.hardware.drm@1.3-service.clearkey \
    android.hardware.drm@1.3-service.widevine

# NFC and Secure Element packages
PRODUCT_PACKAGES += \
    NfcNci \
    Tag \
    SecureElement \
    android.hardware.nfc@1.2-service.st \
    android.hardware.secure_element@1.2-service.st

PRODUCT_COPY_FILES += \
    device/google/redbull/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
    device/google/redbull/nfc/libese-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-hal-st.conf \
    device/google/redbull/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

# Storage health HAL
PRODUCT_PACKAGES += \
    android.hardware.health.storage@1.0-service

PRODUCT_PACKAGES += \
    libmm-omxcore \
    libOmxCore \
    libstagefrighthw \
    libOmxVdec \
    libOmxVdecHevc \
    libOmxVenc \
    libc2dcolorconvert

# Enable Codec 2.0
PRODUCT_PACKAGES += \
    libqcodec2 \
    vendor.qti.media.c2@1.0-service \

PRODUCT_PACKAGES += \
    android.hardware.camera.provider@2.6-impl-google \
    android.hardware.camera.provider@2.6-service-google \
    camera.lito \
    lib_multicam_dualfov_capture_session \
    libgooglecamerahwl_impl \
    libqomx_core \
    libmmjpeg_interface \
    libmmcamera_interface \
    libcameradepthcalibrator

# Google Camera HAL test libraries in debug builds
PRODUCT_PACKAGES_DEBUG += \
    libgoogle_camera_hal_proprietary_tests \
    libgoogle_camera_hal_tests.vendor

PRODUCT_PACKAGES += \
    android.hardware.sensors@2.0-impl \
    android.hardware.sensors@2.0-service \
    android.hardware.sensors@2.0-service.rc

PRODUCT_PACKAGES += \
    fs_config_dirs \
    fs_config_files

# Boot control HAL
PRODUCT_PACKAGES += \
    android.hardware.boot@1.1-impl-pixel-legacy \
    android.hardware.boot@1.1-impl-pixel-legacy.recovery \
    android.hardware.boot@1.1-service \

# Thermal HAL
PRODUCT_PACKAGES += \
    android.hardware.thermal@2.0-service.pixel \

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
    thermal_logd
endif

#GNSS HAL
PRODUCT_PACKAGES += \
    libgps.utils \
    libgnss \
    libloc_core \
    liblocation_api \
    libbatching \
    libgeofencing \
    android.hardware.gnss@2.0-impl-qti \
    android.hardware.gnss@2.0-service-qti

ENABLE_VENDOR_RIL_SERVICE := true

HOSTAPD := hostapd
HOSTAPD += hostapd_cli
PRODUCT_PACKAGES += $(HOSTAPD)

WPA := wpa_supplicant.conf
WPA += wpa_supplicant_wcn.conf
WPA += wpa_supplicant
PRODUCT_PACKAGES += $(WPA)

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += wpa_cli
endif

# Wifi
PRODUCT_PACKAGES += \
    android.hardware.wifi@1.0-service \
    wificond \
    libwpa_client

# WLAN driver configuration files
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \
    $(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
    $(LOCAL_PATH)/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \
    $(LOCAL_PATH)/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini \

LIB_NL := libnl_2
PRODUCT_PACKAGES += $(LIB_NL)

# Audio effects
PRODUCT_PACKAGES += \
    libvolumelistener \
    libqcomvisualizer \
    libqcomvoiceprocessing \
    libqcompostprocbundle

PRODUCT_PACKAGES += \
    audio.primary.lito \
    audio.a2dp.default \
    audio.usb.default \
    audio.r_submix.default \
    libaudio-resampler \
    audio.hearing_aid.default \
    audio.bluetooth.default

PRODUCT_PACKAGES += \
    android.hardware.audio@5.0-impl:32 \
    android.hardware.audio.effect@5.0-impl:32 \
    android.hardware.soundtrigger@2.2-impl \
    android.hardware.bluetooth.audio@2.0-impl \
    android.hardware.audio@2.0-service

# Modules for Audio HAL
PRODUCT_PACKAGES += \
    libcirrusspkrprot \
    libsndmonitor \
    libmalistener \
    liba2dpoffload \
    btaudio_offload_if \
    libmaxxaudio \
    libaudiozoom

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
    tinyplay \
    tinycap \
    tinymix \
    tinypcminfo \
    cplay
endif

# Audio hal xmls
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/audio/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml \
    $(LOCAL_PATH)/audio/sound_trigger_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths.xml

# Cirrus calibration xml
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/audio/crus_sp_cal_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/crus_sp_cal_mixer_paths.xml

# Audio Policy tables
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
    $(LOCAL_PATH)/audio_policy_configuration_a2dp_offload_disabled.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_a2dp_offload_disabled.xml \
    $(LOCAL_PATH)/audio_policy_configuration_bluetooth_legacy_hal.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_bluetooth_legacy_hal.xml \
    $(LOCAL_PATH)/bluetooth_hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_hearing_aid_audio_policy_configuration.xml \
    $(LOCAL_PATH)/audio/audio_configs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_configs.xml \
    $(LOCAL_PATH)/audio/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \
    $(LOCAL_PATH)/audio/audio_io_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_io_policy.conf

# Audio ACDB data

# Audio ACDB workspace files for QACT

# Audio speaker tunning config data

# Audio audiozoom config data

# RT5514 SoundTrigger
PRODUCT_COPY_FILES += \
    device/google/redbull/audio/rt5514_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw1.bin \
    device/google/redbull/audio/rt5514_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw2.bin \
    device/google/redbull/audio/rt5514_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw3.bin \
    device/google/redbull/audio/rt5514_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw4.bin \
    device/google/redbull/audio/rt5514p_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw1.bin \
    device/google/redbull/audio/rt5514p_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw2.bin \
    device/google/redbull/audio/rt5514p_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw3.bin \
    device/google/redbull/audio/rt5514p_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw4.bin

PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
    frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
    frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
    frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
    $(LOCAL_PATH)/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

# Vendor seccomp policy files for media components:
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy

PRODUCT_PROPERTY_OVERRIDES += \
    audio.snd_card.open.retries=50


ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# Subsystem ramdump
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.sys.ssr.enable_ramdumps=1
endif

# Subsystem silent restart
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.sys.ssr.restart_level=modem,adsp,slpi

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# Sensor debug flag
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.debug.ash.logger=0 \
    persist.vendor.debug.ash.logger.time=0
endif

# setup dalvik vm configs
$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)

# Use the default charger mode images
PRODUCT_PACKAGES += \
    charger_res_images

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# b/36703476: Set default log size to 1M
PRODUCT_PROPERTY_OVERRIDES += \
  ro.logd.size=1M
# b/114766334: persist all logs by default rotating on 30 files of 1MiB
PRODUCT_PROPERTY_OVERRIDES += \
  logd.logpersistd=logcatd \
  logd.logpersistd.size=30
endif

# Citadel
PRODUCT_PACKAGES += \
    citadeld \
    citadel_updater \
    android.hardware.authsecret@1.0-service.citadel \
    android.hardware.oemlock@1.0-service.citadel \
    android.hardware.weaver@1.0-service.citadel \
    android.hardware.keymaster@4.0-service.citadel \
    wait_for_strongbox

# Citadel debug stuff
PRODUCT_PACKAGES_DEBUG += \
    test_citadel

# Storage: for factory reset protection feature
PRODUCT_PROPERTY_OVERRIDES += \
    ro.frp.pst=/dev/block/bootdevice/by-name/frp

PRODUCT_PACKAGES += \
    vndk-sp

# Override heap growth limit due to high display density on device
PRODUCT_PROPERTY_OVERRIDES += \
    dalvik.vm.heapgrowthlimit=256m

PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:system_ext/lib/android.hidl.base@1.0.so \
    $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:system_ext/lib64/android.hidl.base@1.0.so \
    $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:vendor/lib/android.hidl.base@1.0.so \
    $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:vendor/lib64/android.hidl.base@1.0.so \

PRODUCT_PACKAGES += \
    ipacm \
    IPACM_cfg.xml

#Set default CDMA subscription to RUIM
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.default_cdma_sub=0

# Set display color mode to Boosted by default
PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.sf.color_saturation=1.1 \
    persist.sys.sf.native_mode=0 \
    persist.sys.sf.color_mode=0

# Keymaster configuration
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml

# Enable modem logging
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vendor.radio.log_loc="/data/vendor/modem_dump" \
    ro.vendor.radio.log_prefix="modem_log_"

# Enable modem logging for debug
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.sys.modem.diag.mdlog=true
else
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.sys.modem.diag.mdlog=false
endif
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.sys.modem.diag.mdlog_br_num=5

# Enable tcpdump_logger on userdebug and eng
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
    PRODUCT_PROPERTY_OVERRIDES += \
        persist.vendor.tcpdump.log.alwayson=false \
        persist.vendor.tcpdump.log.br_num=5
endif

# Preopt SystemUI
PRODUCT_DEXPREOPT_SPEED_APPS += \
    SystemUIGoogle

# Enable stats logging in LMKD
TARGET_LMKD_STATS_LOG := true
PRODUCT_PRODUCT_PROPERTIES += \
    ro.lmk.log_stats=true

# default usb oem functions
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
  PRODUCT_PROPERTY_OVERRIDES += \
      persist.vendor.usb.usbradio.config=diag
endif

# Enable app/sf phase offset as durations. The numbers below are translated from the existing
# positive offsets by finding the duration app/sf will have with the offsets.
# For SF the previous value was 6ms which under 16.6ms vsync time (60Hz) will leave SF with ~10.5ms
# for each frame. For App the previous value was 2ms which under 16.6ms vsync time will leave the
# App with ~20.5ms (16.6ms * 2 - 10.5ms - 2ms). The other values were calculated similarly.
# Full comparison between the old vs. the new values are captured in
# https://docs.google.com/spreadsheets/d/1a_5cVNY3LUAkeg-yL56rYQNwved6Hy-dvEcKSxp6f8k/edit

PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.use_phase_offsets_as_durations=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.sf.duration=10500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.app.duration=20500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.sf.duration=16000000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.app.duration=33500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.sf.duration=13500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.app.duration=38000000

# Do not skip init trigger by default
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    vendor.skip.init=0

BOARD_USES_QCNE := true

PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config

# power HAL
PRODUCT_PACKAGES += \
    android.hardware.power@1.3-service.pixel-libperfmgr

# GPS configuration file
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf

# default atrace HAL
PRODUCT_PACKAGES += \
    android.hardware.atrace@1.0-service

# Reliability reporting
PRODUCT_PACKAGES += \
    pixelstats-vendor

# dynamic partition
PRODUCT_USE_DYNAMIC_PARTITIONS := true

# fastbootd
PRODUCT_PACKAGES += \
    android.hardware.fastboot@1.0-impl.pixel \
    fastbootd

# Use /product/etc/fstab.postinstall to mount system_other
PRODUCT_PRODUCT_PROPERTIES += \
    ro.postinstall.fstab.prefix=/product

PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall

# powerstats HAL
PRODUCT_PACKAGES += \
    android.hardware.power.stats@1.0-service.pixel

QTI_TELEPHONY_UTILS := qti-telephony-utils
QTI_TELEPHONY_UTILS += qti_telephony_utils.xml
PRODUCT_PACKAGES += $(QTI_TELEPHONY_UTILS)

HIDL_WRAPPER := qti-telephony-hidl-wrapper
HIDL_WRAPPER += qti_telephony_hidl_wrapper.xml
PRODUCT_PACKAGES += $(HIDL_WRAPPER)

# Increment the SVN for any official public releases
PRODUCT_PROPERTY_OVERRIDES += \
	ro.vendor.build.svn=1

# ZRAM writeback
PRODUCT_PROPERTY_OVERRIDES += \
    ro.zram.mark_idle_delay_mins=60 \
    ro.zram.first_wb_delay_mins=180 \
    ro.zram.periodic_wb_delay_hours=24

# Enable iwlan service logging for debug
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
    PRODUCT_PROPERTY_OVERRIDES += persist.vendor.iwlan.logging.logcat=true
endif

PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json

# Set Vendor SPL to match platform
VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)

PRODUCT_PROPERTY_OVERRIDES += vendor.audio.adm.buffering.ms=3
PRODUCT_PROPERTY_OVERRIDES += vendor.audio_hal.period_multiplier=2
PRODUCT_PROPERTY_OVERRIDES += af.fast_track_multiplier=1

# Enable AAudio MMAP/NOIRQ data path.
# 1 is AAUDIO_POLICY_NEVER  means only use Legacy path.
# 2 is AAUDIO_POLICY_AUTO   means try MMAP then fallback to Legacy path.
# 3 is AAUDIO_POLICY_ALWAYS means only use MMAP path.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2
# 1 is AAUDIO_POLICY_NEVER  means only use SHARED mode
# 2 is AAUDIO_POLICY_AUTO   means try EXCLUSIVE then fallback to SHARED mode.
# 3 is AAUDIO_POLICY_ALWAYS means only use EXCLUSIVE mode.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2

# Increase the apparent size of a hardware burst from 1 msec to 2 msec.
# A "burst" is the number of frames processed at one time.
# That is an increase from 48 to 96 frames at 48000 Hz.
# The DSP will still be bursting at 48 frames but AAudio will think the burst is 96 frames.
# A low number, like 48, might increase power consumption or stress the system.
PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000

# A2DP offload enabled for compilation
AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true

# A2DP offload supported
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true

# A2DP offload disabled (UI toggle property)
PRODUCT_PROPERTY_OVERRIDES += \
persist.bluetooth.a2dp_offload.disabled=false

# A2DP offload DSP supported encoder list
PRODUCT_PROPERTY_OVERRIDES += \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac

# Enable AAC frame ctl for A2DP sinks
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.bt.aac_frm_ctl.enabled=true

# Set lmkd options
PRODUCT_PRODUCT_PROPERTIES += \
        ro.config.low_ram = false \
        ro.lmk.log_stats = true \

# Modem logging file
PRODUCT_COPY_FILES += \
    device/google/redbull/init.logging.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).logging.rc

# Pixelstats broken mic detection
PRODUCT_PROPERTY_OVERRIDES += vendor.audio.mic_break=true

PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true

# Audio low latency feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml

# Pro audio feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml

# MIDI feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml

# Write flags to the vendor space in /misc partition.
PRODUCT_PACKAGES += \
    misc_writer

# Set thermal warm reset
PRODUCT_PRODUCT_PROPERTIES += \
    ro.thermal_warmreset = true \

# Vendor verbose logging default property
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.verbose_logging_enabled=true
else
PRODUCT_PROPERTY_OVERRIDES += \
    persist.vendor.verbose_logging_enabled=false
endif

$(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota.mk)

#################################################################################
# This is the End of device-common.mk file.
# Now, Pickup other split device-common.mk files:
#################################################################################

# Display
-include hardware/qcom/sm7250/display/config/display-product.mk
-include vendor/qcom/sm7250/proprietary/display/config/display-product-proprietary.mk

# Security
-include vendor/qcom/sm7250/proprietary/securemsm/config/keymaster_vendor_proprietary_board.mk
-include vendor/qcom/sm7250/proprietary/securemsm/config/keymaster_vendor_proprietary_product.mk

# RIL
-include vendor/qcom/sm7250/proprietary/commonsys-intf/data/data_commonsys-intf_vendor_product.mk

# Sensor
-include vendor/qcom/sm7250/proprietary/dspservices_ship/contexthub_system_product.mk
-include vendor/qcom/sm7250/proprietary/sensors-see/build_config/sns_vendor_board.mk
-include vendor/qcom/sm7250/proprietary/sensors-see/build_config/sns_vendor_product.mk

# Factory OTA
-include vendor/google/factoryota/client/factoryota.mk

#################################################################################