| # |
| # Copyright (C) 2021 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| TARGET_KERNEL_DIR ?= device/google/pantah-kernel |
| TARGET_BOARD_KERNEL_HEADERS := device/google/pantah-kernel/kernel-headers |
| |
| $(call inherit-product-if-exists, vendor/google_devices/pantah/prebuilts/device-vendor-cheetah.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/pantah/proprietary/cheetah/device-vendor-cheetah.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/cheetah/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/pantah/proprietary/WallpapersCheetah.mk) |
| |
| DEVICE_PACKAGE_OVERLAYS += device/google/pantah/cheetah/overlay |
| |
| include device/google/pantah/audio/cheetah/audio-tables.mk |
| include device/google/gs201/device-shipping-common.mk |
| include hardware/google/pixel/vibrator/cs40l26/device.mk |
| include device/google/gs101/bluetooth/bluetooth.mk |
| |
| ifeq ($(filter factory_cheetah, $(TARGET_PRODUCT)),) |
| # The ordering of the two uwb makefiles ensures device specific calibration files |
| # are used instead of platform (gs101) specific calibration files - b/230787474. |
| include device/google/pantah/uwb/uwb_calibration.mk |
| include device/google/gs101/uwb/uwb.mk |
| endif |
| |
| $(call soong_config_set,lyric,tuning_product,cheetah) |
| $(call soong_config_set,google3a_config,target_device,cheetah) |
| |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.support_kernel_idle_timer=true |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true |
| |
| # Init files |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/conf/init.pantah.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.pantah.rc \ |
| device/google/pantah/conf/init.cheetah.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.cheetah.rc |
| |
| # Recovery files |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.cheetah.rc |
| |
| # insmod files |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/init.insmod.cheetah.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.cheetah.cfg |
| |
| # MIPI Coex Configs |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/cheetah/radio/cheetah_display_primary_osc_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_osc_coex_table.csv \ |
| device/google/pantah/cheetah/radio/cheetah_camera_rear_tele_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_tele_mipi_coex_table.csv \ |
| device/google/pantah/cheetah/radio/cheetah_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \ |
| device/google/pantah/cheetah/radio/cheetah_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv |
| |
| # Camera |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/media_profiles_cheetah.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml |
| |
| # Media Performance Class 13 |
| PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33 |
| |
| # Display Config |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/cheetah/display_colordata_boe-nt37290_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_boe-nt37290_cal0.pb \ |
| device/google/pantah/cheetah/display_colordata_sdc-s6e3hc3-c10_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_sdc-s6e3hc3-c10_cal0.pb \ |
| device/google/pantah/cheetah/display_colordata_sdc-s6e3hc4_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_sdc-s6e3hc4_cal0.pb \ |
| device/google/pantah/cheetah/display_golden_boe-nt37290_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_boe-nt37290_cal0.pb \ |
| device/google/pantah/cheetah/display_golden_sdc-s6e3hc4_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_sdc-s6e3hc4_cal0.pb |
| |
| # Display LBE |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1 |
| |
| # config of display brightness dimming |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.brightness.dimming.usage=1 |
| |
| # config of primary display frames to reach LHBM peak brightness |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2 |
| |
| # Display RRS default Config |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=1080x2340@120 |
| |
| # NFC |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ |
| device/google/pantah/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/pantah/nfc/libnfc-hal-st-proto1.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-proto1.conf \ |
| device/google/pantah/nfc/libnfc-nci-cheetah.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| NfcNci \ |
| Tag \ |
| android.hardware.nfc-service.st |
| |
| # SecureElement |
| PRODUCT_PACKAGES += \ |
| android.hardware.secure_element@1.2-service-gto \ |
| android.hardware.secure_element@1.2-service-gto-ese2 |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \ |
| device/google/pantah/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \ |
| device/google/pantah/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf |
| |
| DEVICE_MANIFEST_FILE += \ |
| device/google/pantah/nfc/manifest_se.xml |
| |
| # Thermal Config |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/thermal_info_config_cheetah.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \ |
| device/google/pantah/thermal_info_config_proto.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proto.json |
| |
| # Power HAL config |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/powerhint-cheetah.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/powerhint-cheetah-a0.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint-a0.json |
| |
| # Bluetooth HAL |
| DEVICE_MANIFEST_FILE += \ |
| device/google/pantah/bluetooth/manifest_bluetooth.xml |
| PRODUCT_SOONG_NAMESPACES += \ |
| vendor/broadcom/bluetooth |
| PRODUCT_PACKAGES += \ |
| android.hardware.bluetooth@1.1-service.bcmbtlinux \ |
| bt_vendor.conf |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.bluetooth.a2dp_offload.supported=true \ |
| persist.bluetooth.a2dp_offload.disabled=false \ |
| persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac |
| |
| # Spatial Audio |
| PRODUCT_PACKAGES += \ |
| libspatialaudio \ |
| librondo |
| |
| # Bluetooth hci_inject test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| hci_inject |
| |
| # Bluetooth Tx power caps |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_cheetah.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_cheetah_GFE4J_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GFE4J_JP.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_cheetah_GP4BC_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GP4BC_CA.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_cheetah_GE2AE_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GE2AE_EU.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_cheetah_GP4BC_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GP4BC_EU.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_cheetah_GE2AE_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GE2AE_US.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_cheetah_GP4BC_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GP4BC_US.csv |
| |
| # Bluetooth SAR test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| sar_test |
| |
| # Keymaster HAL |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # Gatekeeper HAL |
| #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software |
| |
| |
| # Gatekeeper |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.gatekeeper@1.0-service.software |
| |
| # Keymint replaces Keymaster |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.security.keymint-service |
| |
| # Keymaster |
| #PRODUCT_PACKAGES += \ |
| # android.hardware.keymaster@4.0-impl \ |
| # android.hardware.keymaster@4.0-service |
| |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # PRODUCT_PROPERTY_OVERRIDES += \ |
| # ro.hardware.keystore_desede=true \ |
| # ro.hardware.keystore=software \ |
| # ro.hardware.gatekeeper=software |
| |
| # default BDADDR for EVB only |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55" |
| |
| # PowerStats HAL |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/pantah/powerstats/cheetah \ |
| device/google/pantah |
| |
| # Fingerprint HAL |
| GOODIX_CONFIG_BUILD_VERSION := g7_trusty |
| include device/google/gs101/fingerprint/udfps_common.mk |
| ifeq ($(filter factory%, $(TARGET_PRODUCT)),) |
| include device/google/gs101/fingerprint/udfps_shipping.mk |
| else |
| include device/google/gs101/fingerprint/udfps_factory.mk |
| endif |
| |
| # WiFi Overlay |
| PRODUCT_PACKAGES += \ |
| WifiOverlay2022_C10 |
| |
| PRODUCT_SOONG_NAMESPACES += device/google/pantah/cheetah/ |
| |
| # Trusty liboemcrypto.so |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/pantah/prebuilts |
| |
| # Location |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/location/gps.xml.c10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/pantah/location/gps_user.xml.c10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| endif |
| |
| # Set support one-handed mode |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_one_handed_mode=true |
| |
| # Set zram size |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.zram.size=3g |
| |
| # Increment the SVN for any official public releases |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.build.svn=1 |
| |
| # DCK properties based on target |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.gms.dck.eligible_wcc=3 |
| |
| # Set support hide display cutout feature |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_hide_display_cutout=true |
| |
| PRODUCT_PACKAGES += \ |
| NoCutoutOverlay \ |
| AvoidAppsInCutoutOverlay |
| |
| # SKU specific RROs |
| PRODUCT_PACKAGES += \ |
| SettingsOverlayGFE4J |
| |
| # Bluetooth LE Audio |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio_offload.supported=true \ |
| persist.bluetooth.leaudio_offload.disabled=false \ |
| ro.bluetooth.leaudio_switcher.supported=true |
| |
| # Bluetooth EWP test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| ewp_tool |
| |
| # userdebug specific |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc |
| endif |
| |
| # Fingerprint HAL |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.als_feed_forward_supported=true \ |
| persist.vendor.udfps.lhbm_controlled_in_hal_supported=true |
| |
| # Vibrator HAL |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.vibrator.hal.chirp.enabled=1 |
| |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.firmware.selection=BCM.hcd |
| |
| # Bluetooth AAC VBR |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.a2dp_aac.vbr_supported=true |
| |
| # Override BQR mask to enable LE Audio Choppy report, BTRT logging |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=295006 |
| else |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=94 |
| endif |
| |
| # Keyboard bottom and side padding in dp for portrait mode and height ratio |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.com.google.ime.kb_pad_port_b=8 \ |
| ro.com.google.ime.kb_pad_port_l=11 \ |
| ro.com.google.ime.kb_pad_port_r=11 \ |
| ro.com.google.ime.height_ratio=1.025 |
| |
| # Enable camera exif model/make reporting |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.vendor.camera.exif_reveal_make_model=true |