#
# Copyright (C) 2016 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This file includes all definitions that apply to ALL marlin and sailfish devices
#
# Everything in this directory will become public

ifeq ($(TARGET_PREBUILT_KERNEL),)
    LOCAL_KERNEL := device/google/marlin-kernel/Image.lz4-dtb
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif

PRODUCT_SHIPPING_API_LEVEL := 25

PRODUCT_COPY_FILES += \
    $(LOCAL_KERNEL):kernel

DEVICE_PACKAGE_OVERLAYS += device/google/marlin/overlay

PRODUCT_ENFORCE_RRO_TARGETS := \
    framework-res

# Input device files
PRODUCT_COPY_FILES += \
    device/google/marlin/gpio-keys.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/gpio-keys.kl \
    device/google/marlin/qpnp_pon.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/qpnp_pon.kl \
    device/google/marlin/uinput-fpc.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/uinput-fpc.kl \
    device/google/marlin/uinput-fpc.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/uinput-fpc.idc \
    device/google/marlin/synaptics_dsxv26.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/synaptics_dsxv26.idc \
    frameworks/native/services/vr/virtual_touchpad/idc/vr-virtual-touchpad-0.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/vr-virtual-touchpad-0.idc \
    frameworks/native/services/vr/virtual_touchpad/idc/vr-virtual-touchpad-1.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/vr-virtual-touchpad-1.idc \

# copy customized media_profiles and media_codecs xmls for msm8996
PRODUCT_COPY_FILES += \
    device/google/marlin/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml \
    device/google/marlin/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
    device/google/marlin/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml

# Override heap growth limit due to high display density on device
PRODUCT_PROPERTY_OVERRIDES += \
    dalvik.vm.heapgrowthlimit=256m \
    ro.telephony.default_cdma_sub=0

$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)
$(call inherit-product, device/google/marlin/common/common64.mk)

#Android EGL implementation
PRODUCT_PACKAGES += libGLES_android
PRODUCT_PACKAGES += SSRestartDetector

# graphics
PRODUCT_PROPERTY_OVERRIDES += \
    ro.opengles.version=196610

# b/68017541
PRODUCT_PROPERTY_OVERRIDES += \
    ro.qcom.adreno.qgl.ShaderStorageImageExtendedFormats=0

# HWUI common settings
PRODUCT_PROPERTY_OVERRIDES += \
    ro.hwui.gradient_cache_size=1 \
    ro.hwui.drop_shadow_cache_size=6 \
    ro.hwui.r_buffer_cache_size=8 \
    ro.hwui.texture_cache_flushrate=0.4 \
    ro.hwui.text_small_cache_width=1024 \
    ro.hwui.text_small_cache_height=1024 \
    ro.hwui.text_large_cache_width=2048 \
    ro.hwui.text_large_cache_height=1024

# For android_filesystem_config.h
PRODUCT_PACKAGES += fs_config_files \
                    fs_config_dirs

# Audio configuration
USE_XML_AUDIO_POLICY_CONF := 1
PRODUCT_COPY_FILES += \
    device/google/marlin/audio_output_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_output_policy.conf \
    device/google/marlin/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \
    device/google/marlin/mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths.xml \
    device/google/marlin/mixer_paths_tasha_t50.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_tasha_t50.xml \
    device/google/marlin/aanc_tuning_mixer.txt:$(TARGET_COPY_OUT_VENDOR)/etc/aanc_tuning_mixer.txt \
    device/google/marlin/sound_trigger_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths.xml \
    device/google/marlin/sound_trigger_mixer_paths_tasha_t50.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths_tasha_t50.xml \
    device/google/marlin/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml \
    device/google/marlin/audio_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info.xml \
    device/google/marlin/audio_platform_info_tasha_t50.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_tasha_t50.xml \
    device/google/marlin/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
    device/google/marlin/audio_policy_volumes_drc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes_drc.xml \
    frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
    frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
    frameworks/native/data/etc/android.hardware.vulkan.level-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
    frameworks/native/data/etc/android.hardware.vulkan.version-1_0_3.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml

# Enable AAudio MMAP/NOIRQ data path.
# 2 is AAUDIO_POLICY_AUTO so it will try MMAP then fallback to Legacy path.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2
# Allow EXCLUSIVE then fall back to SHARED.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2

# Increase the apparent size of a hardware burst from 1 msec to 2 msec.
# A "burst" is the number of frames processed at one time.
# That is an increase from 48 to 96 frames at 48000 Hz.
# The DSP will still be bursting at 48 frames but AAudio will think the burst is 96 frames.
# A low number, like 48, might increase power consumption or stress the system.
PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000

PRODUCT_FULL_TREBLE_OVERRIDE := true
PRODUCT_PACKAGES += \
    android.hardware.audio@2.0-service \
    android.hardware.bluetooth@1.0-service \
    android.hardware.contexthub@1.0-service \
    android.hardware.gnss@1.0-service \
    android.hardware.drm@1.0-service \
    android.hardware.light@2.0-service \
    android.hardware.memtrack@1.0-service \
    android.hardware.nfc@1.0-service \
    android.hardware.power@1.1-service.marlin \
    android.hardware.sensors@1.0-service \
    android.hardware.vr@1.0-service \

PRODUCT_PROPERTY_OVERRIDES += ro.hardware.power=marlin

# RenderScript HAL
PRODUCT_PACKAGES += \
    android.hardware.renderscript@1.0-impl

# Light HAL
PRODUCT_PACKAGES += \
    android.hardware.light@2.0-impl

# Keymaster HAL
PRODUCT_PACKAGES += \
    android.hardware.keymaster@3.0-impl \
    android.hardware.keymaster@3.0-service

# Usb HAL
PRODUCT_PACKAGES += \
    android.hardware.usb@1.1-service.marlin

# Audio effects
PRODUCT_PACKAGES += \
    libqcomvisualizer \
    libqcomvoiceprocessing \
    libqcomvoiceprocessingdescriptors \
    libqcompostprocbundle

PRODUCT_PACKAGES += \
    sound_trigger.primary.msm8996

PRODUCT_PACKAGES += \
    android.hardware.audio@2.0-impl \
    android.hardware.audio.effect@2.0-impl \
    android.hardware.soundtrigger@2.1-impl

PRODUCT_PACKAGES += \
    android.hardware.drm@1.0-impl

PRODUCT_PACKAGES += \
    netutils-wrapper-1.0

# set audio fluence, ns, aec property
PRODUCT_PROPERTY_OVERRIDES += \
    ro.qc.sdk.audio.fluencetype=fluencepro \
    persist.audio.fluence.voicecall=true \
    persist.audio.fluence.speaker=true \
    persist.audio.fluence.voicecomm=true \
    persist.audio.fluence.voicerec=false

# WLAN driver configuration files
PRODUCT_COPY_FILES += \
    device/google/marlin/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf     \
    device/google/marlin/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf     \
    device/google/marlin/WCNSS_cfg.dat:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_cfg.dat \
    device/google/marlin/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini

# MIDI feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml

# Audio low latency feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml

# Pro audio feature
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml

# Camera
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \
    frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
    frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml \
    frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml

# Dumpstate HAL
PRODUCT_PACKAGES += \
    android.hardware.dumpstate@1.0-service.marlin

# Wi-Fi
PRODUCT_PACKAGES += \
    android.hardware.wifi@1.0-service \
    libwpa_client \
    hostapd \
    wificond \
    wifilogd \
    wpa_supplicant \
    wpa_supplicant.conf

#ANT+ stack
PRODUCT_PACKAGES += \
    AntHalService \
    libantradio \
    antradio_app \
    libvolumelistener

# Sensor features
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \
    frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \
    frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \
    frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \
    frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \
    frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml \
    frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml

# VR features
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.vr.high_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vr.high_performance.xml \
    frameworks/native/data/etc/android.hardware.vr.headtracking-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vr.headtracking.xml \

# new gatekeeper HAL
PRODUCT_PACKAGES += \
    android.hardware.gatekeeper@1.0-impl \
    android.hardware.gatekeeper@1.0-service

# Common sensor packages
TARGET_USES_NANOHUB_SENSORHAL := true
NANOHUB_SENSORHAL_LID_STATE_ENABLED := true
NANOHUB_SENSORHAL_SENSORLIST := $(LOCAL_PATH)/sensorhal/sensorlist.cpp
NANOHUB_SENSORHAL_DIRECT_REPORT_ENABLED := true
NANOHUB_SENSORHAL_DYNAMIC_SENSOR_EXT_ENABLED := true

PRODUCT_PACKAGES += \
    android.hardware.sensors@1.0-impl \
    android.hardware.contexthub@1.0-impl.nanohub \

PRODUCT_PACKAGES += \
    nanoapp_cmd

# sensor utilities (only for userdebug and eng builds)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
    nanotool \
    sensortest
endif

PRODUCT_COPY_FILES += \
    device/google/marlin/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config

#FEATURE_OPENGLES_EXTENSION_PACK support string config file
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml

# MSM IRQ Balancer configuration file
PRODUCT_COPY_FILES += \
    device/google/marlin/msm_irqbalance.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance.conf

# init scripts
PRODUCT_COPY_FILES += \
    device/google/marlin/init.common.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.rc \
    device/google/marlin/init.common.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.usb.rc \
    device/google/marlin/init.common.nanohub.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.nanohub.rc \
    device/google/marlin/ueventd.common.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc \
    device/google/marlin/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \
    device/google/marlin/init.power.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.power.sh \
    device/google/marlin/init.mid.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.mid.sh \
    device/google/marlin/init.foreground.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.foreground.sh \
    device/google/marlin/init.qcom.devstart.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.devstart.sh

# Reduce client buffer size for fast audio output tracks
PRODUCT_PROPERTY_OVERRIDES += \
    af.fast_track_multiplier=1

# Low latency audio buffer size in frames
PRODUCT_PROPERTY_OVERRIDES += \
    audio_hal.period_size=192

# Write Manufacturer & Model information in created media files.
# IMPORTANT: ONLY SET THIS PROPERTY TO TRUE FOR PUBLIC DEVICES
ifneq ($(filter aosp_sailfish% sailfish% aosp_marlin% marlin%, $(TARGET_PRODUCT)),)
PRODUCT_PROPERTY_OVERRIDES += \
    media.recorder.show_manufacturer_and_model=true
else
$(error "you must decide whether to write manufacturer and model information into created media files for this device. ONLY ENABLE IT FOR PUBLIC DEVICE.")
endif  #TARGET_PRODUCT

# By default, enable zram; experiment can toggle the flag,
# which takes effect on boot
PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.zram_enabled=1

PRODUCT_PROPERTY_OVERRIDES += \
    persist.camera.gyro.android=4 \
    persist.camera.tof.direct=1 \
    persist.camera.tnr.preview=1 \
    persist.camera.tnr.video=1

# Set bluetooth soc to rome
PRODUCT_PROPERTY_OVERRIDES += \
    qcom.bluetooth.soc=rome

PRODUCT_PROPERTY_OVERRIDES += \
    persist.cne.feature=1 \
    persist.radio.data_ltd_sys_ind=1 \
    persist.radio.is_wps_enabled=true \
    persist.radio.RATE_ADAPT_ENABLE=1 \
    persist.radio.ROTATION_ENABLE=1 \
    persist.radio.sw_mbn_update=1 \
    persist.radio.videopause.mode=1 \
    persist.radio.VT_ENABLE=1 \
    persist.radio.VT_HYBRID_ENABLE=1 \
    persist.radio.data_con_rprt=true \
    persist.rcs.supported=1 \
    rild.libpath=/vendor/lib64/libril-qc-qmi-1.so

PRODUCT_PROPERTY_OVERRIDES += \
    persist.data.mode=concurrent

# Enable SM log mechanism by default
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.smlog_switch=1 \
    ro.radio.log_prefix="modem_log_" \
    ro.radio.log_loc="/data/smlog_dump"
endif

# Disable snapshot feature
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.snapshot_enabled=0 \
    persist.radio.snapshot_timer=0

# IMS over WiFi
PRODUCT_PROPERTY_OVERRIDES += \
    persist.data.iwlan.enable=true

# LTE, CDMA, GSM/WCDMA
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.default_network=10 \
    telephony.lteOnCdmaDevice=1

PRODUCT_AAPT_CONFIG += xlarge large
PRODUCT_CHARACTERISTICS := nosdcard

# Enable camera EIS
# eis.enable: enables electronic image stabilization
# is_type: sets image stabilization type
PRODUCT_PROPERTY_OVERRIDES += \
    persist.camera.eis.enable=1 \
    persist.camera.is_type=4

# Fingerprint HIDL implementation
PRODUCT_PACKAGES += \
    android.hardware.biometrics.fingerprint@2.1-service

PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.fingerprint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.fingerprint.xml

INIT_COMMON_DIAG_RC := $(TARGET_COPY_OUT_VENDOR)/etc/init/init.diag.rc

# Modem debugger
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
    device/google/marlin/init.common.diag.rc.userdebug:$(INIT_COMMON_DIAG_RC)

# Subsystem ramdump
PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.ssr.enable_ramdumps=1
else
PRODUCT_COPY_FILES += \
    device/google/marlin/init.common.diag.rc.user:$(INIT_COMMON_DIAG_RC)
endif

# Subsystem silent restart
PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.ssr.restart_level=venus,AR6320,slpi,modem,adsp

PRODUCT_COPY_FILES += \
    device/google/marlin/thermal-engine-marlin.conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine.conf \
    device/google/marlin/thermal-engine-marlin-vr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-vr.conf

$(call inherit-product-if-exists, hardware/qcom/msm8996/msm8996.mk)
$(call inherit-product-if-exists, vendor/qcom/gpu/msm8996/msm8996-gpu-vendor.mk)

#Property of the BDA module path for loading BDA
PRODUCT_PROPERTY_OVERRIDES += \
    ro.bt.bdaddr_path=/sys/module/bdaddress/parameters/bdaddress

# Needed for encryption
PRODUCT_PACKAGES += \
    keystore.msm8996 \
    gatekeeper.msm8996

# Use the A/B updater.
AB_OTA_UPDATER := true
PRODUCT_PACKAGES += \
    update_engine \
    update_verifier

# Enable update engine sideloading by including the static version of the
# boot_control HAL and its dependencies.
PRODUCT_STATIC_BOOT_CONTROL_HAL := \
    bootctrl.msm8996 \
    libgptutils \
    libz \
    libcutils
PRODUCT_PACKAGES += \
    update_engine_sideload

# Tell the system to enable copying odexes from other partition.
PRODUCT_PACKAGES += \
	cppreopts.sh

PRODUCT_PROPERTY_OVERRIDES += \
    ro.cp_system_other_odex=1

# Script that copies preloads directory from system_other to data partition
PRODUCT_COPY_FILES += \
    device/google/marlin/preloads_copy.sh:system/bin/preloads_copy.sh

PRODUCT_PACKAGES_DEBUG += \
    update_engine_client

# A/B updater updatable partitions list. Keep in sync with the partition list
# with "_a" and "_b" variants in the device. Note that the vendor can add more
# more partitions to this list for the bootloader and radio.
AB_OTA_PARTITIONS += \
    boot \
    system

# Bluetooth HAL
PRODUCT_PACKAGES += \
    libbt-vendor \
    android.hardware.bluetooth@1.0-impl

# NFC packages
PRODUCT_PACKAGES += \
    nfc_nci.msm8996 \
    NfcNci \
    Tag \
    android.hardware.nfc@1.0-impl

#GNSS HAL
PRODUCT_PACKAGES += \
    android.hardware.gnss@1.0-impl

# Vibrator
PRODUCT_PACKAGES += \
    android.hardware.vibrator@1.0-service.marlin \

# VR
PRODUCT_PACKAGES += \
    android.hardware.vr@1.0-impl

# Gralloc
PRODUCT_PACKAGES += \
    android.hardware.graphics.allocator@2.0-impl \
    android.hardware.graphics.allocator@2.0-service \
    android.hardware.graphics.mapper@2.0-impl

# HW Composer
PRODUCT_PACKAGES += \
    android.hardware.graphics.composer@2.1-impl \
    android.hardware.graphics.composer@2.1-service

# Boot control
PRODUCT_PACKAGES += \
    android.hardware.boot@1.0-impl \
    android.hardware.boot@1.0-service

# Library used for VTS tests  (only for userdebug and eng builds)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# For VTS profiling.
PRODUCT_PACKAGES += \
     libvts_profiling \
     libvts_multidevice_proto
endif

# NFC/camera interaction workaround - DO NOT COPY TO NEW DEVICES
PRODUCT_PROPERTY_OVERRIDES += \
    ro.camera.notify_nfc=1

PRODUCT_COPY_FILES += \
    device/google/marlin/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci.conf \
    device/google/marlin/nfc/libpn551_fw.so:$(TARGET_COPY_OUT_VENDOR)/lib/libpn551_fw.so

# Bootloader HAL used for A/B updates.
PRODUCT_PACKAGES += \
    bootctrl.msm8996
PRODUCT_PACKAGES_DEBUG += \
    bootctl

# Storage: for factory reset protection feature
PRODUCT_PROPERTY_OVERRIDES += \
    ro.frp.pst=/dev/block/platform/soc/624000.ufshc/by-name/frp

PRODUCT_PROPERTY_OVERRIDES += \
    sdm.debug.disable_rotator_split=1 \
    qdcm.only_pcc_for_trans=1 \
    qdcm.diagonal_matrix_mode=1

# Enable low power video mode for 4K encode
PRODUCT_PROPERTY_OVERRIDES += \
    vidc.debug.perf.mode=2

# OEM Unlock reporting
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    ro.oem_unlock_supported=1

# Setup dm-verity configs
PRODUCT_SYSTEM_VERITY_PARTITION := /dev/block/platform/soc/624000.ufshc/by-name/system
PRODUCT_VENDOR_VERITY_PARTITION := /dev/block/platform/soc/624000.ufshc/by-name/vendor
$(call inherit-product, build/target/product/verity.mk)

# Partitions (listed in the file) to be wiped under recovery.
TARGET_RECOVERY_WIPE := \
    device/google/marlin/recovery.wipe.common

# GPS configuration file
PRODUCT_COPY_FILES += \
    device/google/marlin/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf

# Default permission grant exceptions
PRODUCT_COPY_FILES += \
    device/google/marlin/default-permissions.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default-permissions/default-permissions.xml

# A/B OTA dexopt package
PRODUCT_PACKAGES += otapreopt_script

# A/B OTA dexopt update_engine hookup
AB_OTA_POSTINSTALL_CONFIG += \
    RUN_POSTINSTALL_system=true \
    POSTINSTALL_PATH_system=system/bin/otapreopt_script \
    FILESYSTEM_TYPE_system=ext4 \
    POSTINSTALL_OPTIONAL_system=true

#Reduce cost of scrypt for FBE CE decryption
PRODUCT_PROPERTY_OVERRIDES += \
    ro.crypto.scrypt_params=13:3:1

# Set if a device image has the VTS coverage instrumentation.
ifeq ($(NATIVE_COVERAGE),true)
PRODUCT_PROPERTY_OVERRIDES += \
    ro.vts.coverage=1
PRODUCT_SUPPORTS_VERITY_FEC := false
endif

# b/35633646
# Statically linked toybox for modprobe in recovery mode
PRODUCT_PACKAGES += \
    toybox_static

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
ifeq (,$(filter aosp_marlin aosp_sailfish, $(TARGET_PRODUCT)))
PRODUCT_PACKAGES += \
    NexusLogger
endif # filter it out for aosp build
endif

# b/30349163
# Set Marlin/Sailfish default log size on userdebug/eng build to 1M
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += ro.logd.size=1M
endif

# b/32109329
# Workaround for audio glitches
PRODUCT_PROPERTY_OVERRIDES += \
    audio.adm.buffering.ms=3

# Vendor seccomp policy files for media components:
PRODUCT_COPY_FILES += \
    device/google/marlin/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy

# whitelisted app
PRODUCT_COPY_FILES += \
    device/google/marlin/qti_whitelist.xml:system/etc/sysconfig/qti_whitelist.xml

# Privileged permissions whitelist
PRODUCT_COPY_FILES += \
    device/google/marlin/permissions/privapp-permissions-marlin.xml:system/etc/permissions/privapp-permissions-marlin.xml

PRODUCT_PACKAGES += \
    android.hardware.renderscript@1.0.vndk-sp\
    android.hardware.graphics.allocator@2.0.vndk-sp\
    android.hardware.graphics.mapper@2.0.vndk-sp\
    android.hardware.graphics.common@1.0.vndk-sp\
    libhwbinder.vndk-sp\
    libbase.vndk-sp\
    libcutils.vndk-sp\
    libhardware.vndk-sp\
    libhidlbase.vndk-sp\
    libhidltransport.vndk-sp\
    libutils.vndk-sp\
    libc++.vndk-sp\
    libRS_internal.vndk-sp\
    libRSDriver.vndk-sp\
    libRSCpuRef.vndk-sp\
    libbcinfo.vndk-sp\
    libblas.vndk-sp\
    libcompiler_rt.vndk-sp\
    libbacktrace.vndk-sp\
    libunwind.vndk-sp\
    libunwindstack.vndk-sp\
    liblzma.vndk-sp\
    libutilscallstack.vndk-sp\
    libdexfile.vndk-sp\

# Marlin/Sailfish kernel doesn't have HEH filename encryption
PRODUCT_PROPERTY_OVERRIDES += \
    ro.crypto.volume.filenames_mode=aes-256-cts