| # config.mk |
| # |
| # Product-specific compile-time definitions |
| # |
| |
| TARGET_BOARD_PLATFORM := msm8996 |
| TARGET_BOOTLOADER_BOARD_NAME := marlin |
| TARGET_BOARD_INFO_FILE := device/google/marlin/marlin/board-info.txt |
| |
| ENABLE_SCHEDBOOST := true |
| TARGET_USES_INTERACTION_BOOST := true |
| |
| TARGET_USES_AOSP := true |
| TARGET_ARCH := arm64 |
| TARGET_ARCH_VARIANT := armv8-a |
| TARGET_CPU_ABI := arm64-v8a |
| TARGET_CPU_ABI2 := |
| TARGET_CPU_VARIANT := kryo |
| |
| TARGET_2ND_ARCH := arm |
| TARGET_2ND_ARCH_VARIANT := armv7-a-neon |
| TARGET_2ND_CPU_ABI := armeabi-v7a |
| TARGET_2ND_CPU_ABI2 := armeabi |
| TARGET_2ND_CPU_VARIANT := kryo |
| |
| ENABLE_CPUSETS := true |
| |
| TARGET_NO_BOOTLOADER := true |
| TARGET_NO_KERNEL := false |
| TARGET_NO_RECOVERY := true |
| TARGET_RECOVERY_FSTAB := device/google/marlin/fstab.common |
| BOARD_USES_RECOVERY_AS_BOOT := true |
| BOARD_BUILD_SYSTEM_ROOT_IMAGE := true |
| BOOTLOADER_GCC_VERSION := arm-eabi-4.8 |
| # use msm8996 LK configuration |
| BOOTLOADER_PLATFORM := msm8996 |
| |
| TARGET_USES_OVERLAY := true |
| TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true |
| MAX_VIRTUAL_DISPLAY_DIMENSION := 4096 |
| TARGET_USES_HWC2 := true |
| VSYNC_EVENT_PHASE_OFFSET_NS := 2000000 |
| SF_VSYNC_EVENT_PHASE_OFFSET_NS := 6000000 |
| |
| BOARD_USES_GENERIC_AUDIO := true |
| |
| BOARD_USES_ALSA_AUDIO := true |
| AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true |
| AUDIO_FEATURE_ENABLED_SND_MONITOR := true |
| |
| TARGET_USES_QCOM_MM_AUDIO := true |
| |
| -include $(QCPATH)/common/msm8996/BoardConfigVendor.mk |
| |
| BOARD_HAL_STATIC_LIBRARIES := libdumpstate.marlin |
| |
| # Some framework code requires this to enable BT |
| BOARD_HAVE_BLUETOOTH := true |
| BOARD_USES_WIPOWER := true |
| BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/google/marlin/bluetooth |
| BOARD_HAVE_BLUETOOTH_QCOM := true |
| BOARD_HAS_QCA_BT_ROME := true |
| WCNSS_FILTER_USES_SIBS := true |
| |
| BOARD_HAS_QCOM_WLAN := true |
| BOARD_WLAN_DEVICE := qcwcn |
| WPA_SUPPLICANT_VERSION := VER_0_8_X |
| BOARD_WPA_SUPPLICANT_DRIVER := NL80211 |
| BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) |
| BOARD_HOSTAPD_DRIVER := NL80211 |
| BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) |
| WIFI_DRIVER_FW_PATH_STA := "sta" |
| WIFI_DRIVER_FW_PATH_AP := "ap" |
| |
| USE_OPENGL_RENDERER := true |
| BOARD_USE_LEGACY_UI := true |
| NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3 |
| OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so |
| |
| TARGET_USERIMAGES_USE_EXT4 := true |
| BOARD_BOOTIMAGE_PARTITION_SIZE := 0x02000000 |
| BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2147483648 |
| #BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE := squashfs |
| #BOARD_SYSTEMIMAGE_JOURNAL_SIZE := 0 |
| #BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR := lz4 |
| BOARD_USERDATAIMAGE_PARTITION_SIZE := 10737418240 |
| BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432 |
| BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4 |
| BOARD_FLASH_BLOCK_SIZE := 131072 # (BOARD_KERNEL_PAGESIZE * 64) |
| |
| TARGET_USES_ION := true |
| TARGET_USES_NEW_ION_API :=true |
| ifneq ($(TARGET_USES_AOSP),true) |
| TARGET_USES_QCOM_BSP := true |
| endif |
| |
| BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff |
| |
| BOARD_ROOT_EXTRA_FOLDERS := bt_firmware firmware firmware/radio persist |
| BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp |
| |
| BOARD_SEPOLICY_DIRS += device/google/marlin/sepolicy |
| ifneq ($(filter marlin marlinf, $(TARGET_PRODUCT)),) |
| BOARD_SEPOLICY_DIRS += device/google/marlin/sepolicy/verizon |
| endif |
| BOARD_SECCOMP_POLICY += device/google/marlin/seccomp |
| |
| BOARD_EGL_CFG := device/google/marlin/egl.cfg |
| |
| BOARD_KERNEL_BASE := 0x80000000 |
| BOARD_KERNEL_PAGESIZE := 4096 |
| BOARD_KERNEL_TAGS_OFFSET := 0x02000000 |
| BOARD_RAMDISK_OFFSET := 0x02200000 |
| |
| TARGET_KERNEL_ARCH := arm64 |
| TARGET_KERNEL_HEADER_ARCH := arm64 |
| TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android- |
| TARGET_USES_UNCOMPRESSED_KERNEL := false |
| |
| MAX_EGL_CACHE_KEY_SIZE := 12*1024 |
| MAX_EGL_CACHE_SIZE := 2048*1024 |
| |
| TARGET_NO_RPC := true |
| |
| TARGET_PLATFORM_DEVICE_BASE := /devices/soc/ |
| |
| #Let charger mode enter suspend |
| BOARD_CHARGER_ENABLE_SUSPEND := true |
| |
| #Enable Peripheral Manager |
| TARGET_PER_MGR_ENABLED := true |
| |
| #Enable HW based full disk encryption |
| # TODO: disable due to compile error due to mismatch with system/vold |
| # TARGET_HW_DISK_ENCRYPTION := true |
| |
| #Enable SW based full disk encryption |
| TARGET_SWV8_DISK_ENCRYPTION := false |
| |
| #Enable PD locater/notifier |
| TARGET_PD_SERVICE_ENABLED := true |
| |
| BOARD_QTI_CAMERA_32BIT_ONLY := true |
| TARGET_BOOTIMG_SIGNED := true |
| |
| # Enable dex pre-opt to speed up initial boot |
| ifeq ($(HOST_OS),linux) |
| ifeq ($(WITH_DEXPREOPT),) |
| WITH_DEXPREOPT := true |
| WITH_DEXPREOPT_PIC := true |
| ifneq ($(TARGET_BUILD_VARIANT),user) |
| # Retain classes.dex in APK's for non-user builds |
| DEX_PREOPT_DEFAULT := nostripping |
| endif |
| endif |
| endif |
| |
| # HTC_SENSOR_HUB |
| LIBHTC_SENSORHUB_PROJECT := g_project |
| |
| #Enable/Disable Camera daemon |
| CAMERA_DAEMON_NOT_PRESENT := true |
| |
| #TARGET_LDPRELOAD := libNimsWrap.so |
| |
| # TARGET_COMPILE_WITH_MSM_KERNEL := true |
| |
| TARGET_KERNEL_APPEND_DTB := true |
| # Added to indicate that protobuf-c is supported in this build |
| PROTOBUF_SUPPORTED := false |
| |
| #Add NON-HLOS files for ota upgrade |
| ADD_RADIO_FILES := true |
| TARGET_RECOVERY_UI_LIB := librecovery_ui_nanohub |
| |
| #Add support for firmare upgrade on 8996 |
| HAVE_SYNAPTICS_DSX_FW_UPGRADE := true |
| |
| # Enable MDTP (Mobile Device Theft Protection) |
| TARGET_USE_MDTP := true |
| |
| # Use prebuilt APN lib from Verizon Wireless |
| TARGET_USE_VERIZON_APN_LIB_PREBUILT := true |
| |
| TARGET_BOARD_KERNEL_HEADERS := device/google/marlin/kernel-headers |
| |
| # Install odex files into the other system image |
| BOARD_USES_SYSTEM_OTHER_ODEX := true |
| |
| -include vendor/google_devices/marlin/BoardConfigVendor.mk |
| # Build a separate vendor.img |
| TARGET_COPY_OUT_VENDOR := vendor |
| |
| #NFC |
| NXP_CHIP_TYPE := PN551 |