| # |
| # Copyright (C) 2021 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| TARGET_LINUX_KERNEL_VERSION := $(RELEASE_KERNEL_LYNX_VERSION) |
| # Keeps flexibility for kasan and ufs builds |
| TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_LYNX_DIR) |
| TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_LYNX_DIR)/kernel-headers |
| |
| $(call inherit-product-if-exists, vendor/google_devices/lynx/prebuilts/device-vendor-lynx.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/lynx/device-vendor-lynx.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/WallpapersLynx.mk) |
| |
| DEVICE_PACKAGE_OVERLAYS += device/google/lynx/lynx/overlay |
| |
| include device/google/lynx/audio/lynx/audio-tables.mk |
| include device/google/gs201/device-shipping-common.mk |
| include hardware/google/pixel/vibrator/cs40l26/device.mk |
| include device/google/gs-common/touch/gti/gti.mk |
| include device/google/gs-common/wlan/dump.mk |
| |
| # go/lyric-soong-variables |
| $(call soong_config_set,lyric,camera_hardware,lynx) |
| $(call soong_config_set,lyric,tuning_product,lynx) |
| $(call soong_config_set,google3a_config,target_device,lynx) |
| |
| # Init files |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/conf/init.lynx.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.lynx.rc |
| |
| # Recovery files |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.lynx.rc |
| |
| # insmod files |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/init.insmod.lynx.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.lynx.cfg |
| |
| # Camera |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/media_profiles_lynx.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml |
| |
| # Media Performance Class 13 |
| PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33 |
| |
| # Display Config |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/lynx/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \ |
| device/google/lynx/lynx/display_golden_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_cal0.pb |
| |
| # Display |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=1000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true |
| |
| #config of primary display frames to reach LHBM peak brightness |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2 |
| |
| # NFC |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ |
| device/google/lynx/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/lynx/nfc/libnfc-nci-lynx.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| $(RELEASE_PACKAGE_NFC_STACK) \ |
| Tag \ |
| android.hardware.nfc-service.st \ |
| NfcOverlayLynx |
| |
| # SecureElement |
| PRODUCT_PACKAGES += \ |
| android.hardware.secure_element@1.2-service-gto \ |
| android.hardware.secure_element@1.2-service-gto-ese2 |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \ |
| device/google/lynx/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \ |
| device/google/lynx/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf |
| |
| DEVICE_MANIFEST_FILE += \ |
| device/google/lynx/nfc/manifest_se.xml |
| |
| # Thermal Config |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/thermal_info_config_lynx.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \ |
| device/google/lynx/thermal_info_config_charge_lynx.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json |
| |
| # Power HAL config |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |
| |
| # PowerStats HAL |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/lynx/powerstats \ |
| device/google/lynx |
| |
| # Bluetooth HAL and Pixel extension |
| include device/google/lynx/bluetooth/qti_default.mk |
| |
| # Keymaster HAL |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # Gatekeeper HAL |
| #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software |
| |
| |
| # Gatekeeper |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.gatekeeper@1.0-service.software |
| |
| # Keymint replaces Keymaster |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.security.keymint-service |
| |
| # Keymaster |
| #PRODUCT_PACKAGES += \ |
| # android.hardware.keymaster@4.0-impl \ |
| # android.hardware.keymaster@4.0-service |
| |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # PRODUCT_PROPERTY_OVERRIDES += \ |
| # ro.hardware.keystore_desede=true \ |
| # ro.hardware.keystore=software \ |
| # ro.hardware.gatekeeper=software |
| |
| # Fingerprint HAL |
| GOODIX_CONFIG_BUILD_VERSION := g7_trusty |
| $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_common.mk) |
| ifeq ($(filter factory%, $(TARGET_PRODUCT)),) |
| $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_shipping.mk) |
| else |
| $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_factory.mk) |
| endif |
| |
| # Vibrator HAL |
| $(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION))) |
| ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1 |
| ACTUATOR_MODEL := legacy_zlra_actuator |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.vibrator.hal.f0.comp.enabled=1 \ |
| ro.vendor.vibrator.hal.redc.comp.enabled=0 \ |
| persist.vendor.vibrator.hal.context.enable=false \ |
| persist.vendor.vibrator.hal.context.scale=40 \ |
| persist.vendor.vibrator.hal.context.fade=true \ |
| persist.vendor.vibrator.hal.context.cooldowntime=1600 \ |
| persist.vendor.vibrator.hal.context.settlingtime=5000 |
| |
| # Override Output Distortion Gain |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.audio.hapticgenerator.distortion.output.gain=0.29 |
| |
| # Trusty liboemcrypto.so |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/lynx/prebuilts |
| |
| # Location |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/location/lhd.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \ |
| device/google/lynx/location/scd.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf |
| ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION))) |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/location/gps.6.1.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/location/gps.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| endif |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/location/lhd_user.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \ |
| device/google/lynx/location/scd_user.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf |
| ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION))) |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/location/gps_user.6.1.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/location/gps_user.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| endif |
| endif |
| |
| # Wifi HAL |
| PRODUCT_SOONG_NAMESPACES += hardware/qcom/wlan/wcn6740 |
| |
| # DCK properties based on target |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.gms.dck.eligible_wcc=2 \ |
| ro.gms.dck.se_capability=1 |
| |
| # WIFI COEX |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/wifi/coex_table.xml:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/coex_table.xml |
| |
| # WiFi Overlay |
| PRODUCT_PACKAGES += \ |
| WifiOverlay2023Mid |
| |
| # Wifi Aware Interface |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| wifi.aware.interface=wifi-aware0 |
| |
| # Set zram size |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.zram.size=3g |
| |
| # Increment the SVN for any official public releases |
| ifdef RELEASE_SVN_LYNX |
| TARGET_SVN ?= $(RELEASE_SVN_LYNX) |
| else |
| # Set this for older releases that don't use build flag |
| TARGET_SVN ?= 46 |
| endif |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.build.svn=$(TARGET_SVN) |
| |
| # Set device family property for SMR |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.build.device_family=P10C10L10 |
| |
| # Set build properties for SMR builds |
| ifeq ($(RELEASE_IS_SMR), true) |
| ifneq (,$(RELEASE_BASE_OS_LYNX)) |
| PRODUCT_BASE_OS := $(RELEASE_BASE_OS_LYNX) |
| endif |
| endif |
| |
| # Set build properties for EMR builds |
| ifeq ($(RELEASE_IS_EMR), true) |
| ifneq (,$(RELEASE_BASE_OS_LYNX)) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.build.version.emergency_base_os=$(RELEASE_BASE_OS_LYNX) |
| endif |
| endif |
| # Set support hide display cutout feature |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_hide_display_cutout=true |
| |
| # Set support One-handed mode |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_one_handed_mode=true |
| |
| # Fingerprint als feed forward |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.als_feed_forward_supported=true \ |
| persist.vendor.udfps.lhbm_controlled_in_hal_supported=true |
| |
| # Hide cutout overlays |
| PRODUCT_PACKAGES += \ |
| NoCutoutOverlay \ |
| AvoidAppsInCutoutOverlay |
| |
| # MIPI Coex Configs |
| PRODUCT_COPY_FILES += \ |
| device/google/lynx/lynx/radio/lynx_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv |
| |
| # Camera |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.camera.extended_launch_boost=1 \ |
| persist.vendor.camera.optimized_tnr_freq=1 \ |
| persist.vendor.camera.raise_buf_allocation_priority=1 \ |
| persist.vendor.camera.start_cpu_throttling_at_moderate_thermal=1 |
| |
| # Enable camera 1080P 60FPS binning mode |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.1080P_60fps_binning=true |
| |
| # Increase thread priority for nodes stop |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.increase_thread_priority_nodes_stop=true |
| |
| # OIS with system imu |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.ois_with_system_imu=true |
| |
| # Enable camera exif model/make reporting |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.exif_reveal_make_model=true |
| |
| # Enable front camera always binning for 720P or smaller resolution |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.front_720P_always_binning=true |
| |
| # Device features |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml |
| |
| # The default value of this variable is false and should only be set to true when |
| # the device allows users to enable the seamless transfer feature. |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| euicc.seamless_transfer_enabled_in_non_qs=true |
| |
| ##Audio Vendor property |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.audio.cca.enabled=false |
| |
| # userdebug specific |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc |
| endif |
| |
| # SKU specific RROs |
| PRODUCT_PACKAGES += \ |
| SettingsOverlayG82U8 \ |
| SettingsOverlayG0DZQ \ |
| SettingsOverlayGHL1X \ |
| SettingsOverlayGWKK3 |
| |
| # Enable DeviceAsWebcam support |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.usb.uvc.enabled=true |
| |
| # Quick Start device-specific settings |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.quick_start.oem_id=00e0 \ |
| ro.quick_start.device_id=lynx |
| |
| # Bluetooth device id |
| # Raven: 0x410B |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.device_id.product_id=16651 |
| |
| # ETM |
| ifneq (,$(RELEASE_ETM_IN_USERDEBUG_ENG)) |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| $(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk) |
| endif |
| endif |
