sensors/sensors_dummy.c - device/google/gs101 - Git at Google

 /*
  * Copyright (C) 2009 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 /* this implements a sensors hardware library for the Android emulator.
  * the following code should be built as a shared library that will be
  * placed into /system/lib/hw/sensors.goldfish.so
  *
  * it will be loaded by the code in hardware/libhardware/hardware.c
  * which is itself called from com_android_server_SensorService.cpp
  */

 #define  SENSORS_SERVICE_NAME "sensors"

 #define LOG_TAG "Dummy_Sensors"

 #include <unistd.h>
 #include <fcntl.h>
 #include <errno.h>
 #include <string.h>
 #include <log/log.h>
 #include <cutils/sockets.h>
 #include <hardware/sensors.h>
 #include <pthread.h>

 #if 0
 #define  D(...)  ALOGD(__VA_ARGS__)
 #else
 #define  D(...)  ((void)0)
 #endif

 #define  E(...)  ALOGE(__VA_ARGS__)

 /** SENSOR IDS AND NAMES
  **/

 #define MAX_NUM_SENSORS 8

 #define SUPPORTED_SENSORS  ((1<<MAX_NUM_SENSORS)-1)

 #define  ID_BASE           SENSORS_HANDLE_BASE
 #define  ID_ACCELERATION   (ID_BASE+0)
 #define  ID_MAGNETIC_FIELD (ID_BASE+1)
 #define  ID_ORIENTATION    (ID_BASE+2)
 #define  ID_TEMPERATURE    (ID_BASE+3)
 #define  ID_PROXIMITY      (ID_BASE+4)
 #define  ID_LIGHT          (ID_BASE+5)
 #define  ID_PRESSURE       (ID_BASE+6)
 #define  ID_HUMIDITY       (ID_BASE+7)

 #define  SENSORS_ACCELERATION    (1 << ID_ACCELERATION)
 #define  SENSORS_MAGNETIC_FIELD  (1 << ID_MAGNETIC_FIELD)
 #define  SENSORS_ORIENTATION     (1 << ID_ORIENTATION)
 #define  SENSORS_TEMPERATURE     (1 << ID_TEMPERATURE)
 #define  SENSORS_PROXIMITY       (1 << ID_PROXIMITY)
 #define  SENSORS_LIGHT           (1 << ID_LIGHT)
 #define  SENSORS_PRESSURE        (1 << ID_PRESSURE)
 #define  SENSORS_HUMIDITY        (1 << ID_HUMIDITY)

 #define  ID_CHECK(x)  ((unsigned)((x) - ID_BASE) < MAX_NUM_SENSORS)

 #define  SENSORS_LIST  \
     SENSOR_(ACCELERATION,"acceleration") \
     SENSOR_(MAGNETIC_FIELD,"magnetic-field") \
     SENSOR_(ORIENTATION,"orientation") \
     SENSOR_(TEMPERATURE,"temperature") \
     SENSOR_(PROXIMITY,"proximity") \
     SENSOR_(LIGHT, "light") \
     SENSOR_(PRESSURE, "pressure") \
     SENSOR_(HUMIDITY, "humidity")

 static const struct {
     const char*  name;
     int          id; } _sensorIds[MAX_NUM_SENSORS] =
 {
 #define SENSOR_(x,y)  { y, ID_##x },
     SENSORS_LIST
 #undef  SENSOR_
 };

 static const char*
 _sensorIdToName( int  id )
 {
     int  nn;
     for (nn = 0; nn < MAX_NUM_SENSORS; nn++)
         if (id == _sensorIds[nn].id)
             return _sensorIds[nn].name;
     return "<UNKNOWN>";
 }

 static int
 _sensorIdFromName( const char*  name )
 {
     int  nn;

     if (name == NULL)
         return -1;

     for (nn = 0; nn < MAX_NUM_SENSORS; nn++)
         if (!strcmp(name, _sensorIds[nn].name))
             return _sensorIds[nn].id;

     return -1;
 }

 /* return the current time in nanoseconds */
 static int64_t now_ns(void) {
     struct timespec  ts;
     clock_gettime(CLOCK_MONOTONIC, &ts);
     return (int64_t)ts.tv_sec * 1000000000 + ts.tv_nsec;
 }

 /** SENSORS POLL DEVICE
  **
  ** This one is used to read sensor data from the hardware.
  ** We implement this by simply reading the data from the
  ** emulator through the QEMUD channel.
  **/

 typedef struct SensorDevice {
     struct sensors_poll_device_1  device;
     sensors_event_t               sensors[MAX_NUM_SENSORS];
     uint32_t                      pendingSensors;
     int64_t                       timeStart;
     int64_t                       timeOffset;
     uint32_t                      active_sensors;
     int                           fd;
     pthread_mutex_t               lock;
 } SensorDevice;

 /* Grab the file descriptor to the emulator's sensors service pipe.
  * This function returns a file descriptor on success, or -errno on
  * failure, and assumes the SensorDevice instance's lock is held.
  *
  * This is needed because set_delay(), poll() and activate() can be called
  * from different threads, and poll() is blocking.
  *
  * 1) On a first thread, de-activate() all sensors first, then call poll(),
  *    which results in the thread blocking.
  *
  * 2) On a second thread, slightly later, call set_delay() then activate()
  *    to enable the acceleration sensor.
  *
  * The system expects this to unblock the first thread which will receive
  * new sensor events after the activate() call in 2).
  *
  * This cannot work if both threads don't use the same connection.
  *
  * TODO(digit): This protocol is brittle, implement another control channel
  *              for set_delay()/activate()/batch() when supporting HAL 1.3
  */
 static int sensor_device_get_fd_locked(SensorDevice* dev) {
     /* Create connection to service on first call */
     if (dev->fd < 0) {
 	    int ret = -errno;
 	    E("%s: Could not open connection to service: %s", __FUNCTION__,
 	    		    strerror(-ret));
 	    return ret;
     }
     return dev->fd;
 }

 /* Pick up one pending sensor event. On success, this returns the sensor
  * id, and sets |*event| accordingly. On failure, i.e. if there are no
  * pending events, return -EINVAL.
  *
  * Note: The device's lock must be acquired.
  */
 static int sensor_device_pick_pending_event_locked(SensorDevice* d,
                                                    sensors_event_t*  event)
 {
     uint32_t mask = SUPPORTED_SENSORS & d->pendingSensors;

     if (mask) {
         uint32_t i = 31 - __builtin_clz(mask);

 	pthread_mutex_lock(&d->lock);
         d->pendingSensors &= ~(1U << i);
         *event = d->sensors[i];
         event->sensor = i;
         event->version = sizeof(*event);
 	pthread_mutex_unlock(&d->lock);
         D("%s: %d [%f, %f, %f]", __FUNCTION__,
                 i,
                 event->data[0],
                 event->data[1],
                 event->data[2]);
         return i;
     }
     E("No sensor to return!!! pendingSensors=0x%08x", d->pendingSensors);
     // we may end-up in a busy loop, slow things down, just in case.
     usleep(1000);
     return -EINVAL;
 }

 static int sensor_device_close(struct hw_device_t* dev0)
 {
     SensorDevice* dev = (void*)dev0;
     // Assume that there are no other threads blocked on poll()
     if (dev->fd >= 0) {
         close(dev->fd);
         dev->fd = -1;
     }
     pthread_mutex_destroy(&dev->lock);
     free(dev);
     return 0;
 }

 /* Return an array of sensor data. This function blocks until there is sensor
  * related events to report. On success, it will write the events into the
  * |data| array, which contains |count| items. The function returns the number
  * of events written into the array, which shall never be greater than |count|.
  * On error, return -errno code.
  *
  * Note that according to the sensor HAL [1], it shall never return 0!
  *
  * [1] http://source.android.com/devices/sensors/hal-interface.html
  */
 static int sensor_device_poll(struct sensors_poll_device_t *dev0,
                               sensors_event_t* data, int count)
 {
     return -EIO;
 }

 static int sensor_device_activate(struct sensors_poll_device_t *dev0,
                                   int handle,
                                   int enabled)
 {
     SensorDevice* dev = (void*)dev0;

     D("%s: handle=%s (%d) enabled=%d", __FUNCTION__,
         _sensorIdToName(handle), handle, enabled);

     /* Sanity check */
     if (!ID_CHECK(handle)) {
         E("%s: bad handle ID", __FUNCTION__);
         return -EINVAL;
     }

     /* Exit early if sensor is already enabled/disabled. */
     uint32_t mask = (1U << handle);
     uint32_t sensors = enabled ? mask : 0;

     pthread_mutex_lock(&dev->lock);

     uint32_t active = dev->active_sensors;
     uint32_t new_sensors = (active & ~mask) | (sensors & mask);
     uint32_t changed = active ^ new_sensors;

     if (changed)
 	    dev->active_sensors = new_sensors;

     pthread_mutex_unlock(&dev->lock);
     return 0;
 }

 static int sensor_device_default_flush(
         struct sensors_poll_device_1* dev0,
         int handle) {

     SensorDevice* dev = (void*)dev0;

     D("%s: handle=%s (%d)", __FUNCTION__,
         _sensorIdToName(handle), handle);

     /* Sanity check */
     if (!ID_CHECK(handle)) {
         E("%s: bad handle ID", __FUNCTION__);
         return -EINVAL;
     }

     pthread_mutex_lock(&dev->lock);
     dev->sensors[handle].version = META_DATA_VERSION;
     dev->sensors[handle].type = SENSOR_TYPE_META_DATA;
     dev->sensors[handle].sensor = 0;
     dev->sensors[handle].timestamp = 0;
     dev->sensors[handle].meta_data.what = META_DATA_FLUSH_COMPLETE;
     dev->pendingSensors |= (1U << handle);
     pthread_mutex_unlock(&dev->lock);

     return 0;
 }

 static int sensor_device_set_delay(struct sensors_poll_device_t *dev0,
                                    int handle __unused,
                                    int64_t ns)
 {
     return 0;
 }

 static int sensor_device_default_batch(
      struct sensors_poll_device_1* dev,
      int sensor_handle,
      int flags,
      int64_t sampling_period_ns,
      int64_t max_report_latency_ns) {
     return sensor_device_set_delay(dev, sensor_handle, sampling_period_ns);
 }

 /** MODULE REGISTRATION SUPPORT
  **
  ** This is required so that hardware/libhardware/hardware.c
  ** will dlopen() this library appropriately.
  **/

 /*
  * the following is the list of all supported sensors.
  * this table is used to build sSensorList declared below
  * according to which hardware sensors are reported as
  * available from the emulator (see get_sensors_list below)
  *
  * note: numerical values for maxRange/resolution/power for
  *       all sensors but light, pressure and humidity were
  *       taken from the reference AK8976A implementation
  */
 static const struct sensor_t sSensorListInit[] = {
         { .name       = "Accelerometer",
           .vendor     = "The Android Open Source Project",
           .version    = 1,
           .handle     = ID_ACCELERATION,
           .type       = SENSOR_TYPE_ACCELEROMETER,
           .maxRange   = 2.8f,
           .resolution = 1.0f/4032.0f,
           .power      = 3.0f,
           .minDelay   = 10000,
           .maxDelay   = 60 * 1000 * 1000,
           .fifoReservedEventCount = 0,
           .fifoMaxEventCount =   0,
           .stringType =         0,
           .requiredPermission = 0,
           .flags = SENSOR_FLAG_CONTINUOUS_MODE,
           .reserved   = {}
         },
 };

 static struct sensor_t  sSensorList[1];

 static int sensors__get_sensors_list(struct sensors_module_t* module __unused,
         struct sensor_t const** list)
 {
     *list = sSensorList;

     return 0;
 }

 static int
 open_sensors(const struct hw_module_t* module,
              const char*               name,
              struct hw_device_t*      *device)
 {
     int  status = -EINVAL;

     D("%s: name=%s", __FUNCTION__, name);

     if (!strcmp(name, SENSORS_HARDWARE_POLL)) {
         SensorDevice *dev = malloc(sizeof(*dev));

         memset(dev, 0, sizeof(*dev));

         dev->device.common.tag     = HARDWARE_DEVICE_TAG;
         dev->device.common.version = SENSORS_DEVICE_API_VERSION_1_3;
         dev->device.common.module  = (struct hw_module_t*) module;
         dev->device.common.close   = sensor_device_close;
         dev->device.poll           = sensor_device_poll;
         dev->device.activate       = sensor_device_activate;
         dev->device.setDelay       = sensor_device_set_delay;

         // Version 1.3-specific functions
         dev->device.batch       = sensor_device_default_batch;
         dev->device.flush       = sensor_device_default_flush;

         dev->fd = -1;
         pthread_mutex_init(&dev->lock, NULL);

         *device = &dev->device.common;
         status  = 0;
     }
     return status;
 }


 static struct hw_module_methods_t sensors_module_methods = {
     .open = open_sensors
 };

 struct sensors_module_t HAL_MODULE_INFO_SYM = {
     .common = {
         .tag = HARDWARE_MODULE_TAG,
         .version_major = 1,
         .version_minor = 0,
         .id = SENSORS_HARDWARE_MODULE_ID,
         .name = "Dummy SENSORS Module",
         .author = "The Android Open Source Project",
         .methods = &sensors_module_methods,
     },
     .get_sensors_list = sensors__get_sensors_list
 };
	/*
	* Copyright (C) 2009 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	/* this implements a sensors hardware library for the Android emulator.
	* the following code should be built as a shared library that will be
	* placed into /system/lib/hw/sensors.goldfish.so
	*
	* it will be loaded by the code in hardware/libhardware/hardware.c
	* which is itself called from com_android_server_SensorService.cpp
	*/

	#define SENSORS_SERVICE_NAME "sensors"

	#define LOG_TAG "Dummy_Sensors"

	#include <unistd.h>
	#include <fcntl.h>
	#include <errno.h>
	#include <string.h>
	#include <log/log.h>
	#include <cutils/sockets.h>
	#include <hardware/sensors.h>
	#include <pthread.h>

	#if 0
	#define D(...) ALOGD(__VA_ARGS__)
	#else
	#define D(...) ((void)0)
	#endif

	#define E(...) ALOGE(__VA_ARGS__)

	/** SENSOR IDS AND NAMES
	**/

	#define MAX_NUM_SENSORS 8

	#define SUPPORTED_SENSORS ((1<<MAX_NUM_SENSORS)-1)

	#define ID_BASE SENSORS_HANDLE_BASE
	#define ID_ACCELERATION (ID_BASE+0)
	#define ID_MAGNETIC_FIELD (ID_BASE+1)
	#define ID_ORIENTATION (ID_BASE+2)
	#define ID_TEMPERATURE (ID_BASE+3)
	#define ID_PROXIMITY (ID_BASE+4)
	#define ID_LIGHT (ID_BASE+5)
	#define ID_PRESSURE (ID_BASE+6)
	#define ID_HUMIDITY (ID_BASE+7)

	#define SENSORS_ACCELERATION (1 << ID_ACCELERATION)
	#define SENSORS_MAGNETIC_FIELD (1 << ID_MAGNETIC_FIELD)
	#define SENSORS_ORIENTATION (1 << ID_ORIENTATION)
	#define SENSORS_TEMPERATURE (1 << ID_TEMPERATURE)
	#define SENSORS_PROXIMITY (1 << ID_PROXIMITY)
	#define SENSORS_LIGHT (1 << ID_LIGHT)
	#define SENSORS_PRESSURE (1 << ID_PRESSURE)
	#define SENSORS_HUMIDITY (1 << ID_HUMIDITY)

	#define ID_CHECK(x) ((unsigned)((x) - ID_BASE) < MAX_NUM_SENSORS)

	#define SENSORS_LIST \
	SENSOR_(ACCELERATION,"acceleration") \
	SENSOR_(MAGNETIC_FIELD,"magnetic-field") \
	SENSOR_(ORIENTATION,"orientation") \
	SENSOR_(TEMPERATURE,"temperature") \
	SENSOR_(PROXIMITY,"proximity") \
	SENSOR_(LIGHT, "light") \
	SENSOR_(PRESSURE, "pressure") \
	SENSOR_(HUMIDITY, "humidity")

	static const struct {
	const char* name;
	int id; } _sensorIds[MAX_NUM_SENSORS] =
	{
	#define SENSOR_(x,y) { y, ID_##x },
	SENSORS_LIST
	#undef SENSOR_
	};

	static const char*
	_sensorIdToName( int id )
	{
	int nn;
	for (nn = 0; nn < MAX_NUM_SENSORS; nn++)
	if (id == _sensorIds[nn].id)
	return _sensorIds[nn].name;
	return "<UNKNOWN>";
	}

	static int
	_sensorIdFromName( const char* name )
	{
	int nn;

	if (name == NULL)
	return -1;

	for (nn = 0; nn < MAX_NUM_SENSORS; nn++)
	if (!strcmp(name, _sensorIds[nn].name))
	return _sensorIds[nn].id;

	return -1;
	}

	/* return the current time in nanoseconds */
	static int64_t now_ns(void) {
	struct timespec ts;
	clock_gettime(CLOCK_MONOTONIC, &ts);
	return (int64_t)ts.tv_sec * 1000000000 + ts.tv_nsec;
	}

	/** SENSORS POLL DEVICE
	**
	** This one is used to read sensor data from the hardware.
	** We implement this by simply reading the data from the
	** emulator through the QEMUD channel.
	**/

	typedef struct SensorDevice {
	struct sensors_poll_device_1 device;
	sensors_event_t sensors[MAX_NUM_SENSORS];
	uint32_t pendingSensors;
	int64_t timeStart;
	int64_t timeOffset;
	uint32_t active_sensors;
	int fd;
	pthread_mutex_t lock;
	} SensorDevice;

	/* Grab the file descriptor to the emulator's sensors service pipe.
	* This function returns a file descriptor on success, or -errno on
	* failure, and assumes the SensorDevice instance's lock is held.
	*
	* This is needed because set_delay(), poll() and activate() can be called
	* from different threads, and poll() is blocking.
	*
	* 1) On a first thread, de-activate() all sensors first, then call poll(),
	* which results in the thread blocking.
	*
	* 2) On a second thread, slightly later, call set_delay() then activate()
	* to enable the acceleration sensor.
	*
	* The system expects this to unblock the first thread which will receive
	* new sensor events after the activate() call in 2).
	*
	* This cannot work if both threads don't use the same connection.
	*
	* TODO(digit): This protocol is brittle, implement another control channel
	* for set_delay()/activate()/batch() when supporting HAL 1.3
	*/
	static int sensor_device_get_fd_locked(SensorDevice* dev) {
	/* Create connection to service on first call */
	if (dev->fd < 0) {
	int ret = -errno;
	E("%s: Could not open connection to service: %s", __FUNCTION__,
	strerror(-ret));
	return ret;
	}
	return dev->fd;
	}

	/* Pick up one pending sensor event. On success, this returns the sensor
	* id, and sets \|*event\| accordingly. On failure, i.e. if there are no
	* pending events, return -EINVAL.
	*
	* Note: The device's lock must be acquired.
	*/
	static int sensor_device_pick_pending_event_locked(SensorDevice* d,
	sensors_event_t* event)
	{
	uint32_t mask = SUPPORTED_SENSORS & d->pendingSensors;

	if (mask) {
	uint32_t i = 31 - __builtin_clz(mask);

	pthread_mutex_lock(&d->lock);
	d->pendingSensors &= ~(1U << i);
	*event = d->sensors[i];
	event->sensor = i;
	event->version = sizeof(*event);
	pthread_mutex_unlock(&d->lock);
	D("%s: %d [%f, %f, %f]", __FUNCTION__,
	i,
	event->data[0],
	event->data[1],
	event->data[2]);
	return i;
	}
	E("No sensor to return!!! pendingSensors=0x%08x", d->pendingSensors);
	// we may end-up in a busy loop, slow things down, just in case.
	usleep(1000);
	return -EINVAL;
	}

	static int sensor_device_close(struct hw_device_t* dev0)
	{
	SensorDevice* dev = (void*)dev0;
	// Assume that there are no other threads blocked on poll()
	if (dev->fd >= 0) {
	close(dev->fd);
	dev->fd = -1;
	}
	pthread_mutex_destroy(&dev->lock);
	free(dev);
	return 0;
	}

	/* Return an array of sensor data. This function blocks until there is sensor
	* related events to report. On success, it will write the events into the
	* \|data\| array, which contains \|count\| items. The function returns the number
	* of events written into the array, which shall never be greater than \|count\|.
	* On error, return -errno code.
	*
	* Note that according to the sensor HAL [1], it shall never return 0!
	*
	* [1] http://source.android.com/devices/sensors/hal-interface.html
	*/
	static int sensor_device_poll(struct sensors_poll_device_t *dev0,
	sensors_event_t* data, int count)
	{
	return -EIO;
	}

	static int sensor_device_activate(struct sensors_poll_device_t *dev0,
	int handle,
	int enabled)
	{
	SensorDevice* dev = (void*)dev0;

	D("%s: handle=%s (%d) enabled=%d", __FUNCTION__,
	_sensorIdToName(handle), handle, enabled);

	/* Sanity check */
	if (!ID_CHECK(handle)) {
	E("%s: bad handle ID", __FUNCTION__);
	return -EINVAL;
	}

	/* Exit early if sensor is already enabled/disabled. */
	uint32_t mask = (1U << handle);
	uint32_t sensors = enabled ? mask : 0;

	pthread_mutex_lock(&dev->lock);

	uint32_t active = dev->active_sensors;
	uint32_t new_sensors = (active & ~mask) \| (sensors & mask);
	uint32_t changed = active ^ new_sensors;

	if (changed)
	dev->active_sensors = new_sensors;

	pthread_mutex_unlock(&dev->lock);
	return 0;
	}

	static int sensor_device_default_flush(
	struct sensors_poll_device_1* dev0,
	int handle) {

	SensorDevice* dev = (void*)dev0;

	D("%s: handle=%s (%d)", __FUNCTION__,
	_sensorIdToName(handle), handle);

	/* Sanity check */
	if (!ID_CHECK(handle)) {
	E("%s: bad handle ID", __FUNCTION__);
	return -EINVAL;
	}

	pthread_mutex_lock(&dev->lock);
	dev->sensors[handle].version = META_DATA_VERSION;
	dev->sensors[handle].type = SENSOR_TYPE_META_DATA;
	dev->sensors[handle].sensor = 0;
	dev->sensors[handle].timestamp = 0;
	dev->sensors[handle].meta_data.what = META_DATA_FLUSH_COMPLETE;
	dev->pendingSensors \|= (1U << handle);
	pthread_mutex_unlock(&dev->lock);

	return 0;
	}

	static int sensor_device_set_delay(struct sensors_poll_device_t *dev0,
	int handle __unused,
	int64_t ns)
	{
	return 0;
	}

	static int sensor_device_default_batch(
	struct sensors_poll_device_1* dev,
	int sensor_handle,
	int flags,
	int64_t sampling_period_ns,
	int64_t max_report_latency_ns) {
	return sensor_device_set_delay(dev, sensor_handle, sampling_period_ns);
	}

	/** MODULE REGISTRATION SUPPORT
	**
	** This is required so that hardware/libhardware/hardware.c
	** will dlopen() this library appropriately.
	**/

	/*
	* the following is the list of all supported sensors.
	* this table is used to build sSensorList declared below
	* according to which hardware sensors are reported as
	* available from the emulator (see get_sensors_list below)
	*
	* note: numerical values for maxRange/resolution/power for
	* all sensors but light, pressure and humidity were
	* taken from the reference AK8976A implementation
	*/
	static const struct sensor_t sSensorListInit[] = {
	{ .name = "Accelerometer",
	.vendor = "The Android Open Source Project",
	.version = 1,
	.handle = ID_ACCELERATION,
	.type = SENSOR_TYPE_ACCELEROMETER,
	.maxRange = 2.8f,
	.resolution = 1.0f/4032.0f,
	.power = 3.0f,
	.minDelay = 10000,
	.maxDelay = 60 * 1000 * 1000,
	.fifoReservedEventCount = 0,
	.fifoMaxEventCount = 0,
	.stringType = 0,
	.requiredPermission = 0,
	.flags = SENSOR_FLAG_CONTINUOUS_MODE,
	.reserved = {}
	},
	};

	static struct sensor_t sSensorList[1];

	static int sensors__get_sensors_list(struct sensors_module_t* module __unused,
	struct sensor_t const** list)
	{
	*list = sSensorList;

	return 0;
	}

	static int
	open_sensors(const struct hw_module_t* module,
	const char* name,
	struct hw_device_t* *device)
	{
	int status = -EINVAL;

	D("%s: name=%s", __FUNCTION__, name);

	if (!strcmp(name, SENSORS_HARDWARE_POLL)) {
	SensorDevice dev = malloc(sizeof(dev));

	memset(dev, 0, sizeof(*dev));

	dev->device.common.tag = HARDWARE_DEVICE_TAG;
	dev->device.common.version = SENSORS_DEVICE_API_VERSION_1_3;
	dev->device.common.module = (struct hw_module_t*) module;
	dev->device.common.close = sensor_device_close;
	dev->device.poll = sensor_device_poll;
	dev->device.activate = sensor_device_activate;
	dev->device.setDelay = sensor_device_set_delay;

	// Version 1.3-specific functions
	dev->device.batch = sensor_device_default_batch;
	dev->device.flush = sensor_device_default_flush;

	dev->fd = -1;
	pthread_mutex_init(&dev->lock, NULL);

	*device = &dev->device.common;
	status = 0;
	}
	return status;
	}


	static struct hw_module_methods_t sensors_module_methods = {
	.open = open_sensors
	};

	struct sensors_module_t HAL_MODULE_INFO_SYM = {
	.common = {
	.tag = HARDWARE_MODULE_TAG,
	.version_major = 1,
	.version_minor = 0,
	.id = SENSORS_HARDWARE_MODULE_ID,
	.name = "Dummy SENSORS Module",
	.author = "The Android Open Source Project",
	.methods = &sensors_module_methods,
	},
	.get_sensors_list = sensors__get_sensors_list
	};