#
# Copyright 2017 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#
# Common BoardConfig for all supported architectures.
#

# Build a separate vendor.img partition
BOARD_USES_VENDORIMAGE := true
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_VENDORIMAGE_PARTITION_SIZE := 100663296 # 96MB
TARGET_COPY_OUT_VENDOR := vendor

TARGET_NO_RECOVERY := true
BOARD_USES_GENERIC_AUDIO := false
USE_CAMERA_STUB := true
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
BOARD_EGL_CFG := device/google/cuttlefish/shared/config/egl.cfg
TARGET_USES_64_BIT_BINDER := true

# Hardware composer configuration
TARGET_USES_HWC2 := true

# Bluetooth configuration
BOARD_BLUETOOTH_USE_TEST_AS_VENDOR := true
BOARD_BLUETOOTH_IMPL_DIR := $(TOP_DIR)system/bt
BOARD_USE_BLUETOOTH_STUBS := false

# The compiler will occasionally generate movaps, etc.
BOARD_MALLOC_ALIGNMENT := 16

# System partition size: 3.0G
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
BOARD_USERDATAIMAGE_PARTITION_SIZE := 1073741824

# Cache partition size: 64M
BOARD_CACHEIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4

BOARD_KERNEL_CMDLINE := loop.max_part=7
BOARD_KERNEL_CMDLINE += console=ttyS0 androidboot.console=ttyS1
BOARD_KERNEL_CMDLINE += androidboot.hardware=vsoc
BOARD_KERNEL_CMDLINE += enforcing=0 audit=1
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
BOARD_KERNEL_CMDLINE += mac80211_hwsim.radios=0

# TODO(b/65266349) Figure out why this is needed
BOARD_KERNEL_CMDLINE += security=selinux

# Minimum size of the final bootable disk image: 10G
# GCE will pad disk images out to 10G. Our disk images should be at least as
# big to avoid warnings about partition table oddities.
BOARD_DISK_IMAGE_MINIMUM_SIZE := 10737418240

BOARD_BOOTIMAGE_MAX_SIZE := 8388608
BOARD_SYSLOADER_MAX_SIZE := 7340032
# TODO(san): See if we can get rid of this.
BOARD_FLASH_BLOCK_SIZE := 512

WITH_DEXPREOPT := true

USE_OPENGL_RENDERER := true

# Wifi.
BOARD_WLAN_DEVICE           := wlan0
BOARD_HOSTAPD_DRIVER        := NL80211
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB   := lib_driver_cmd_simulated
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_simulated
WPA_SUPPLICANT_VERSION      := VER_0_8_X
WIFI_DRIVER_FW_PATH_PARAM   := "/dev/null"
WIFI_DRIVER_FW_PATH_STA     := "/dev/null"
WIFI_DRIVER_FW_PATH_AP      := "/dev/null"

BOARD_SEPOLICY_DIRS += device/google/cuttlefish/shared/sepolicy

# master has breaking changes in dlfcn.h, but the platform SDK hasn't been
# bumped. Restore the line below when it is.
# VSOC_VERSION_CFLAGS := -DVSOC_PLATFORM_SDK_VERSION=26
VSOC_VERSION_CFLAGS := -DVSOC_PLATFORM_SDK_VERSION=${PLATFORM_SDK_VERSION}
VSOC_STLPORT_INCLUDES :=
VSOC_STLPORT_LIBS :=
VSOC_STLPORT_STATIC_LIBS :=
VSOC_TEST_INCLUDES := external/googletest/googlemock/include external/googletest/googletest/include
VSOC_TEST_LIBRARIES := libgmock_main_host libgtest_host libgmock_host
VSOC_LIBCXX_STATIC := libc++_static
VSOC_PROTOBUF_SHARED_LIB := libprotobuf-cpp-full

# TODO(ender): Remove all these once we stop depending on GCE code.
GCE_VERSION_CFLAGS := -DGCE_PLATFORM_SDK_VERSION=${PLATFORM_SDK_VERSION}
GCE_STLPORT_INCLUDES := $(VSOC_STLPORT_INCLUDES)
GCE_STLPORT_LIBS := $(VSOC_STLPORT_LIBS)
GCE_STLPORT_STATIC_LIBS := $(VSOC_STLPORT_STATIC_LIBS)
GCE_TEST_INCLUDES := $(VSOC_TEST_INCLUDES)
GCE_TEST_LIBRARIES := $(VSOC_TEST_LIBRARIES)
GCE_LIBCXX_STATIC := $(VSOC_LIBCXX_STATIC)
GCE_PROTOBUF_SHARED_LIB := $(VSOC_PROTOBUF_SHARED_LIB)
# TODO(ender): up till here.

STAGEFRIGHT_AVCENC_CFLAGS := -DANDROID_GCE

INIT_BOOTCHART := true

DEVICE_MANIFEST_FILE := device/google/cuttlefish/shared/config/manifest.xml

# Need this so that the application's loop on reading input can be synchronized
# with HW VSYNC
TARGET_RUNNING_WITHOUT_SYNC_FRAMEWORK := true

# Settings for dhcpcd-6.8.2.
DHCPCD_USE_IPV6 := no
DHCPCD_USE_DBUS := no
DHCPCD_USE_SCRIPT := yes

USE_XML_AUDIO_POLICY_CONF := 1