blob: 323feb7874bf470a37c7449d367f47aaba126d3c [file] [log] [blame]
<?xml version="1.0" encoding="utf-8"?>
** Copyright 2016, The Android Open Source Project
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** See the License for the specific language governing permissions and
** limitations under the License.
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
autodetected from the Configuration. -->
<bool name="config_showNavigationBar">true</bool>
<!-- Indicate whether closing the lid causes the device to go to sleep and opening
it causes the device to wake up.
The default is false. -->
<bool name="config_lidControlsSleep">true</bool>
<!-- List of regexpressions describing the interface (if any) that represent tetherable
Wifi interfaces. If the device doesn't want to support tethering over Wifi this
should be empty. An example would be "softap.*" -->
<string-array translatable="false" name="config_tether_wifi_regexs">
<!-- List of regexpressions describing the interface (if any) that represent tetherable
Wifi P2P interfaces. If the device doesn't want to support tethering over Wifi P2p this
should be empty. An example would be "p2p-p2p.*" -->
<string-array translatable="false" name="config_tether_wifi_p2p_regexs">
<!-- Enable doze mode
ComponentName of a dream to show whenever the system would otherwise have gone to sleep. -->
<string translatable="false" name="config_dozeComponent"></string>
<!-- Type of the ambient tap sensor. Empty if ambient tap is not supported. -->
<string name="config_dozeTapSensorType" translatable="false"></string>
<!-- MMS user agent string -->
<string name="config_mms_user_agent" translatable="false">g025e</string>
<!-- MMS user agent profile url -->
<string name="config_mms_user_agent_profile_url" translatable="false"></string>
<!-- Array of desired screen brightness in nits corresponding to the lux values
in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
config_screenBrightnessMaximumNits, the display brightness is defined as the measured
brightness of an all-white image.
If this is defined then:
- config_autoBrightnessLcdBacklightValues should not be defined
- config_screenBrightnessNits must be defined
- config_screenBrightnessBacklight must be defined
This array should have size one greater than the size of the config_autoBrightnessLevels
array. The brightness values must be non-negative and non-decreasing. This must be
overridden in platform specific overlays -->
<array name="config_autoBrightnessDisplayValuesNits">
<item>5.139055</item> <!-- 0 - 1 -->
<item>9.962018965</item> <!-- 1 - 2 -->
<item>18.34822964</item> <!-- 2 - 3 -->
<item>21.55068128</item> <!-- 3 - 4 -->
<item>24.0167788</item> <!-- 4 - 8 -->
<item>30.62162162</item> <!-- 8 - 12 -->
<item>35.09486396</item> <!-- 12 - 20 -->
<item>41.2249643</item> <!-- 20 - 33 -->
<item>47.6760716</item> <!-- 33 - 55 -->
<item>55.73002427</item> <!-- 55 - 90 -->
<item>66.24126116</item> <!-- 90 - 148 -->
<item>79.67614115</item> <!-- 148 - 245 -->
<item>98.04727274</item> <!-- 245 - 403 -->
<item>125.1221991</item> <!-- 403 - 665 -->
<item>161.6875093</item> <!-- 665 - 1097 -->
<item>208.4885553</item> <!-- 1097 - 1808 -->
<item>264.8221315</item> <!-- 1808 - 2981 -->
<item>327.8974352</item> <!-- 2981 - 5000 -->
<item>401.1676739</item> <!-- 5000 - 10000 -->
<item>494.0846144</item> <!-- 10000+ -->
<!-- Minimum screen brightness allowed by the power manager. -->
<integer name="config_screenBrightnessDim">6</integer>
<!-- Screen brightness when dozing. -->
<integer name="config_screenBrightnessDoze">34</integer>
<!-- Whether the always on display mode is available. -->
<bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
<!-- Disable AOD by default -->
<bool name="config_dozeAlwaysOnEnabled">false</bool>
<!-- True if the display hardware only has brightness buckets rather than a full range of
backlight values -->
<bool name="config_displayBrightnessBucketsInDoze">true</bool>
<!-- Default screen brightness for VR setting. Target default value: 0x0BB for EVT1.1. -->
<!-- 8 bit brightness level of 6 corresponds to the 10 bit brightness level of 0x0B6,
8 bit brightness level of 7 corresponds to the 10 bit brightness level of 0x0C1 on EVT1.1. -->
<integer name="config_screenBrightnessForVrSettingDefault">7</integer>
<integer name="config_screenBrightnessForVrSettingMinimum">6</integer>
<integer name="config_screenBrightnessForVrSettingMaximum">7</integer>
<!-- Minimum screen brightness setting allowed by power manager.
The user is forbidden from setting the brightness below this level. -->
<item name="config_screenBrightnessSettingMinimumFloat" format="float" type="dimen">0.0</item>
<!-- Maximum screen brightness allowed by the power manager.
The user is forbidden from setting the brightness above this level. -->
<item name="config_screenBrightnessSettingMaximumFloat" format="float" type="dimen">1.0</item>
<!-- Default screen brightness setting
Must be in the range specified by minimum and maximum. -->
<item name="config_screenBrightnessSettingDefaultFloat" format="float" type="dimen">0.32156862745</item>
<!-- An array describing the screen's backlight values corresponding to the brightness
values in the config_screenBrightnessNits array.
This array should be equal in size to config_screenBrightnessBacklight. -->
<integer-array name="config_screenBrightnessBacklight">
<!-- An array of floats describing the screen brightness in nits corresponding to the backlight
values in the config_screenBrightnessBacklight array. On OLED displays these values
should be measured with an all white image while the display is in the fully on state.
Note that this value should *not* reflect the maximum brightness value for any high
brightness modes but only the maximum brightness value obtainable in a sustainable manner.
This array should be equal in size to config_screenBrightnessBacklight -->
<array name="config_screenBrightnessNits">
<!-- The nominal white coordinates, in CIE1931 XYZ color space, for Display White Balance to
use in its calculations. AWB will adapt this white point to the target ambient white
point. The array must include a total of 3 float values (X, Y, Z) -->
<string-array name="config_displayWhiteBalanceDisplayNominalWhite">
<!-- Nominal White X --> <item>0.950352</item>
<!-- Nominal White Y --> <item>1.0 </item>
<!-- Nominal White Z --> <item>1.089366</item>
<!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
<integer name="config_shutdownBatteryTemperature">600</integer>
<!-- Whether or not we should show the option to show battery percentage -->
<bool name="config_battery_percentage_setting_available">true</bool>
<!-- Whether or not wcg mode should be enabled on this device -->
<bool name="config_enableWcgMode">true</bool>
<!-- Whether the display cutout region of the main built-in display should be forced to
black in software (to avoid aliasing or emulate a cutout that is not physically existent).
<bool name="config_fillMainBuiltInDisplayCutout">true</bool>
<!-- An array of device capabilities defined by GSMA SGP.22 v2.2.2, and their corresponding major
version. -->
<string-array translatable="false" name="config_telephonyEuiccDeviceCapabilities">
<!-- Display cutout configuration -->
<string translatable="false" name="config_mainBuiltInDisplayCutout">
<!-- The hole punch dimensions are this:
M 38,78 a 39,39 0 1,0 78,0 a 39,39 0 1,0 -78,0
but using a radius 40 circle for now to see the antialiasing.
M 37,77 a 40,40 0 1 0 80,0 40,40 0 1 0 -80,0 Z
<string translatable="false" name="config_mainBuiltInDisplayCutoutRectApproximation">
M 0.0,0.0
h 136
v 136
h -136
<!-- Radius of the software rounded corners. -->
<dimen name="rounded_corner_radius">108px</dimen>
<!-- Height of the status bar in portrait. The height should be
Max((status bar content height + waterfall top size), top cutout size) -->
<dimen name="status_bar_height_portrait">145px</dimen>
<dimen name="status_bar_height_landscape">28dp</dimen>
<!-- Height of area above QQS where battery/time go (equal to status bar) -->
<dimen name="quick_qs_offset_height">145px</dimen>
<!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
where: IDs are unique per device, Modality as defined in,
and Strength as defined in -->
<string-array name="config_biometric_sensors" translatable="false" >
<item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->