| # |
| # Copyright (C) 2021 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| TARGET_KERNEL_DIR ?= device/google/bluejay-kernel |
| TARGET_BOARD_KERNEL_HEADERS := device/google/bluejay-kernel/kernel-headers |
| |
| $(call inherit-product-if-exists, vendor/google_devices/bluejay/prebuilts/device-vendor-bluejay.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/gs101/prebuilts/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/gs101/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/bluejay/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/bluejay/proprietary/bluejay/device-vendor-bluejay.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/bluejay/proprietary/WallpapersBluejay.mk) |
| |
| GOODIX_CONFIG_BUILD_VERSION := g7_trusty |
| DEVICE_PACKAGE_OVERLAYS += device/google/bluejay/bluejay/overlay |
| |
| include device/google/gs101/fingerprint/extension/fingerprint.extension.mk |
| include device/google/bluejay-sepolicy/bluejay-sepolicy.mk |
| include device/google/bluejay/audio/bluejay/audio-tables.mk |
| include device/google/gs101/device-shipping-common.mk |
| include device/google/gs101/fingerprint/udfps_common.mk |
| include device/google/gs101/telephony/pktrouter.mk |
| include hardware/google/pixel/vibrator/cs40l26/device.mk |
| include device/google/gs101/bluetooth/bluetooth.mk |
| |
| ifeq ($(filter factory_bluejay, $(TARGET_PRODUCT)),) |
| include device/google/gs101/fingerprint/udfps_shipping.mk |
| else |
| include device/google/gs101/fingerprint/udfps_factory.mk |
| endif |
| |
| $(call soong_config_set,lyric,tuning_product,bluejay) |
| $(call soong_config_set,google3a_config,target_device,bluejay) |
| |
| # Init files |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/conf/init.blueport.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.blueport.rc \ |
| device/google/bluejay/conf/init.bluejay.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.bluejay.rc |
| |
| # Recovery files |
| PRODUCT_COPY_FILES += \ |
| device/google/gs101/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.bluejay.rc |
| |
| # insmod files |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/init.insmod.bluejay.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.bluejay.cfg |
| |
| # Thermal Config |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/thermal_info_config_bluejay.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json |
| |
| # Power HAL config |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |
| |
| # Camera |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/media_profiles_bluejay.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.camera.extended_launch_boost=1 \ |
| persist.vendor.camera.raise_buf_allocation_priority=1 \ |
| persist.vendor.camera.fixed_fps_range_boost=1 |
| |
| # Display Config |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \ |
| device/google/bluejay/display_golden_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_cal0.pb |
| |
| # Media Performance Class 12 |
| PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=31 |
| |
| # NFC |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ |
| device/google/bluejay/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/bluejay/nfc/libnfc-hal-st-GB17L.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-GB17L.conf \ |
| device/google/bluejay/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| NfcNci \ |
| Tag \ |
| android.hardware.nfc@1.2-service.st |
| |
| # SecureElement |
| PRODUCT_PACKAGES += \ |
| android.hardware.secure_element@1.2-service-gto |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \ |
| device/google/bluejay/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf |
| |
| DEVICE_MANIFEST_FILE += \ |
| device/google/bluejay/nfc/manifest_nfc.xml \ |
| device/google/bluejay/nfc/manifest_se_bluejay.xml |
| |
| # PowerStats HAL |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/bluejay/powerstats/bluejay \ |
| device/google/bluejay |
| |
| # Increment the SVN for any official public releases |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.build.svn=14 |
| |
| # DCK properties based on target |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.gms.dck.eligible_wcc=2 |
| |
| # Trusty liboemcrypto.so |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/bluejay/prebuilts |
| |
| # Display LBE |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1 |
| |
| # Bluetooth Hal Extension test tools |
| PRODUCT_PACKAGES_DEBUG += \ |
| sar_test \ |
| hci_inject |
| |
| # Config of primary display frames to reach LHBM peak brightness |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2 |
| |
| # Bluetooth Tx power caps for bluejay |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/bluetooth_power_limits.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_GB17L_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_GX7AS_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_GB62Z_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GB62Z_US.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_GX7AS_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GX7AS_US.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_G1AZG_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G1AZG_EU.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_GB62Z_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GB62Z_EU.csv |
| |
| # Bluetooth |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.a2dp_aac.vbr_supported=true |
| |
| # Bluetooth HAL |
| PRODUCT_PACKAGES += \ |
| bt_vendor.conf |
| |
| # Set zram size |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.zram.size=2g |
| |
| # Enable camera 1080P 60FPS binning mode |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.1080P_60fps_binning=true |
| |
| # Enable camera exif model/make reporting |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.exif_reveal_make_model=true |
| |
| # Disable rear light sensor probing explicitly |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.rls_supported=false |
| |
| # Fingerprint antispoof property |
| PRODUCT_PRODUCT_PROPERTIES +=\ |
| persist.vendor.fingerprint.disable.fake.override=none |
| |
| # Fingerprint als feed forward |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.als_feed_forward_supported=true \ |
| persist.vendor.udfps.lhbm_controlled_in_hal_supported=true |
| |
| # Fingerprint MAX auth latency |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.gf.debug.timer.threshold=1,400,400,400,600,600,600 |
| |
| # Hide cutout overlays |
| PRODUCT_PACKAGES += \ |
| NoCutoutOverlay \ |
| AvoidAppsInCutoutOverlay |
| |
| # SKU specific RROs |
| PRODUCT_PACKAGES += \ |
| SettingsOverlayGB17L \ |
| SettingsOverlayG1AZG \ |
| SettingsOverlayGB62Z \ |
| SettingsOverlayGX7AS |
| |
| # Set support hide display cutout feature |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_hide_display_cutout=true |
| |
| # Set support one-handed mode |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_one_handed_mode=true |
| |
| # GPS xml |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/gps.xml.b3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/bluejay/gps_user.xml.b3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| endif |
| |
| # This device is shipped with 32 (Android S V2) |
| PRODUCT_SHIPPING_API_LEVEL := 32 |
| |
| # Vibrator HAL |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.vibrator.hal.supported_primitives=243 |
| |
| # Device features |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml |
| |
| # Keyboard bottom padding in dp for portrait mode and height ratio |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.com.google.ime.kb_pad_port_b=6.4 \ |
| ro.com.google.ime.height_ratio=1.05 |
