| # |
| # Copyright 2016 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| PRODUCT_HARDWARE := barbet |
| |
| ifeq ($(TARGET_PREBUILT_KERNEL),) |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| LOCAL_KERNEL := device/google/redbull-kernel/Image.lz4 |
| else |
| LOCAL_KERNEL := device/google/redbull-kernel/vintf/Image.lz4 |
| endif |
| else |
| LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL) |
| endif |
| |
| PRODUCT_VENDOR_KERNEL_HEADERS := device/google/redbull-kernel/sm7250/kernel-headers |
| |
| DEVICE_PACKAGE_OVERLAYS += device/google/barbet/barbet/overlay |
| |
| PRODUCT_DEVICE_SVN_OVERRIDE := true |
| |
| include device/google/redbull/device-common.mk |
| |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota/launch_with_vendor_ramdisk.mk) |
| |
| # Increment the SVN for any official public releases |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.build.svn=49 |
| |
| # Enable watchdog timeout loop breaker. |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| framework_watchdog.fatal_window.second=600 \ |
| framework_watchdog.fatal_count=3 |
| |
| # Enable zygote critical window. |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| zygote.critical_window.minute=10 |
| |
| # LOCAL_PATH is device/google/redbull before this |
| LOCAL_PATH := device/google/barbet |
| |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/barbet \ |
| hardware/qcom/wlan/legacy |
| |
| PRODUCT_PACKAGES += \ |
| libtasspkrprot |
| |
| # Audio XMLs for barbet |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/audio/mixer_paths_bolero_snd.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_bolero_snd.xml \ |
| $(LOCAL_PATH)/audio/sound_trigger_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths.xml \ |
| $(LOCAL_PATH)/audio/audio_platform_info_bolero_snd.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_bolero_snd.xml \ |
| $(LOCAL_PATH)/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \ |
| $(LOCAL_PATH)/audio/audio_policy_configuration_a2dp_offload_disabled.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_a2dp_offload_disabled.xml \ |
| $(LOCAL_PATH)/audio/audio_policy_configuration_bluetooth_legacy_hal.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_bluetooth_legacy_hal.xml \ |
| $(LOCAL_PATH)/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \ |
| $(LOCAL_PATH)/audio/tas2562/tas25xx_TI_0.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/tas25xx_TI_0.bin \ |
| frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration_7_0.xml \ |
| frameworks/av/services/audiopolicy/config/a2dp_in_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_in_audio_policy_configuration_7_0.xml \ |
| frameworks/av/services/audiopolicy/config/bluetooth_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_audio_policy_configuration_7_0.xml \ |
| frameworks/av/services/audiopolicy/config/hearing_aid_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/hearing_aid_audio_policy_configuration_7_0.xml \ |
| frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml |
| |
| # Audio ACDB data |
| ifeq ($(wildcard vendor/google_cei/factory/prebuilt/ftm.mk),) |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/audio/acdbdata/Bluetooth_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Bluetooth_cal.acdb \ |
| $(LOCAL_PATH)/audio/acdbdata/General_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/General_cal.acdb \ |
| $(LOCAL_PATH)/audio/acdbdata/Global_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Global_cal.acdb \ |
| $(LOCAL_PATH)/audio/acdbdata/Handset_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Handset_cal.acdb \ |
| $(LOCAL_PATH)/audio/acdbdata/Hdmi_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Hdmi_cal.acdb \ |
| $(LOCAL_PATH)/audio/acdbdata/Headset_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Headset_cal.acdb \ |
| $(LOCAL_PATH)/audio/acdbdata/Speaker_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Speaker_cal.acdb \ |
| $(LOCAL_PATH)/audio/acdbdata/adsp_avs_config.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/adsp_avs_config.acdb |
| |
| # Audio ACDB workspace files for QACT |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/audio/acdbdata/workspaceFile.qwsp:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/workspaceFile.qwsp |
| endif |
| endif |
| |
| # Calibration Tools for factory |
| ifneq ($(wildcard vendor/google_cei/factory/prebuilt/ftm.mk),) |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/audio/tas2562/calib.config:$(TARGET_COPY_OUT_VENDOR)/etc/calib.config \ |
| $(LOCAL_PATH)/audio/tas2562/PinkNoise_m22db_RmsPow.wav:$(TARGET_COPY_OUT_VENDOR)/etc/PinkNoise_m22db_RmsPow.wav \ |
| $(LOCAL_PATH)/audio/tas2562/Silence.wav:$(TARGET_COPY_OUT_VENDOR)/etc/Silence.wav \ |
| $(LOCAL_PATH)/audio/tas2562/TAS_FactoryApp:$(TARGET_COPY_OUT_VENDOR)/bin/TAS_FactoryApp |
| endif |
| |
| ifeq ($(wildcard vendor/google_devices/barbet/proprietary/device-vendor-barbet.mk),) |
| BUILD_WITHOUT_VENDOR := true |
| endif |
| |
| # USB HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.usb-service.barbet |
| PRODUCT_PACKAGES += \ |
| android.hardware.usb.gadget-service.barbet |
| |
| # Vibrator HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.vibrator-service.barbet |
| |
| # DRV2624 Haptics Waveform |
| PRODUCT_COPY_FILES += \ |
| device/google/barbet/vibrator/drv2624/drv2624.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/drv2624.bin |
| |
| # Vibrator HAL |
| PRODUCT_PRODUCT_PROPERTIES +=\ |
| ro.vendor.vibrator.hal.config.dynamic=1 \ |
| ro.vendor.vibrator.hal.click.duration=7 \ |
| ro.vendor.vibrator.hal.tick.duration=7 \ |
| ro.vendor.vibrator.hal.heavyclick.duration=7 \ |
| ro.vendor.vibrator.hal.short.voltage=161 \ |
| ro.vendor.vibrator.hal.long.voltage=161 \ |
| ro.vendor.vibrator.hal.long.frequency.shift=10 \ |
| ro.vendor.vibrator.hal.steady.shape=1 \ |
| ro.vendor.vibrator.hal.lptrigger=0 |
| |
| |
| # Dumpstate HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.dumpstate@1.1-service.barbet |
| |
| #per device |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/barbet/init.barbet.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.barbet.rc |
| |
| # insmod files |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.insmod.barbet.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.barbet.cfg |
| |
| # Recovery |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.recovery.device.rc:recovery/root/init.recovery.barbet.rc |
| |
| PRODUCT_PACKAGES += \ |
| sensors.$(PRODUCT_HARDWARE) \ |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/powerhint_$(PRODUCT_HARDWARE).json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint_$(PRODUCT_HARDWARE).json |
| |
| # Thermal HAL config |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/thermal_info_config_$(PRODUCT_HARDWARE)_evt.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_$(PRODUCT_HARDWARE)_evt.json \ |
| $(LOCAL_PATH)/thermal_info_config_$(PRODUCT_HARDWARE).json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_$(PRODUCT_HARDWARE).json |
| |
| # Support to disable thermal protection at run time |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.chamber.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_HARDWARE).chamber.rc |
| endif |
| |
| # Audio effects |
| PRODUCT_PACKAGES += \ |
| libqcomvoiceprocessingdescriptors |
| |
| # Fingerprint HIDL |
| include device/google/barbet/fingerprint.mk |
| |
| # NFC |
| PRODUCT_COPY_FILES += \ |
| device/google/barbet/nfc/libnfc-hal-st-G4S1M.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-G4S1M.conf |
| |
| # Bluetooth Tx power caps for barbet |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/bluetooth_power_limits_barbet_ROW.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_barbet_us.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_barbet_eu.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \ |
| $(LOCAL_PATH)/bluetooth_power_limits_barbet_jp.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv |
| |
| # Keyboard bottom padding in dp for portrait mode |
| PRODUCT_PRODUCT_PROPERTIES += ro.com.google.ime.kb_pad_port_b=14.4 |
| |
| # SKU specific RROs |
| PRODUCT_PACKAGES += \ |
| SettingsOverlayG025H \ |
| SettingsOverlayG4S1M \ |
| SettingsOverlayG1F8F |
| |
| # Set support hide display cutout feature |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_hide_display_cutout=true |
| |
| PRODUCT_PACKAGES += \ |
| NoCutoutOverlay \ |
| AvoidAppsInCutoutOverlay |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/barbet/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml |
| |
| # Workaround for Qualcomm neural network HAL |
| PRODUCT_PACKAGES += \ |
| libprotobuf-cpp-full-3.9.1-vendorcompat |
