blob: 6f7893a158f50df73845b0c0444c72b293858084 [file] [log] [blame]
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
/**
* \file
*
* \par Purpose
*
* Standard output methods for reporting debug information, warnings and
* errors, which can be easily be turned on/off.
*
* \par Usage
* -# Initialize the DBGU using TRACE_CONFIGURE() if you intend to eventually
* disable ALL traces; otherwise use DBGU_Configure().
* -# Uses the TRACE_DEBUG(), TRACE_INFO(), TRACE_WARNING(), TRACE_ERROR()
* TRACE_FATAL() macros to output traces throughout the program.
* -# Each type of trace has a level : Debug 5, Info 4, Warning 3, Error 2
* and Fatal 1. Disable a group of traces by changing the value of
* TRACE_LEVEL during compilation; traces with a level bigger than TRACE_LEVEL
* are not generated. To generate no trace, use the reserved value 0.
* -# Trace disabling can be static or dynamic. If dynamic disabling is selected
* the trace level can be modified in runtime. If static disabling is selected
* the disabled traces are not compiled.
*
* \par traceLevels Trace level description
* -# TRACE_DEBUG (5): Traces whose only purpose is for debugging the program,
* and which do not produce meaningful information otherwise.
* -# TRACE_INFO (4): Informational trace about the program execution. Should
* enable the user to see the execution flow.
* -# TRACE_WARNING (3): Indicates that a minor error has happened. In most case
* it can be discarded safely; it may even be expected.
* -# TRACE_ERROR (2): Indicates an error which may not stop the program execution,
* but which indicates there is a problem with the code.
* -# TRACE_FATAL (1): Indicates a major error which prevents the program from going
* any further.
*/
#ifndef _TRACE_
#define _TRACE_
/*
* Headers
*/
#include "pio.h"
#include <stdio.h>
/*
* Global Definitions
*/
/** Softpack Version */
#define SOFTPACK_VERSION "1.0"
#define TRACE_LEVEL_DEBUG 5
#define TRACE_LEVEL_INFO 4
#define TRACE_LEVEL_WARNING 3
#define TRACE_LEVEL_ERROR 2
#define TRACE_LEVEL_FATAL 1
#define TRACE_LEVEL_NO_TRACE 0
/* By default, all traces are output except the debug one. */
#if !defined(TRACE_LEVEL)
#define TRACE_LEVEL TRACE_LEVEL_INFO
#endif
/* By default, trace level is static (not dynamic) */
#if !defined(DYN_TRACES)
#define DYN_TRACES 0
#endif
#if defined(NOTRACE)
#error "Error: NOTRACE has to be not defined !"
#endif
#undef NOTRACE
#if (DYN_TRACES==0)
#if (TRACE_LEVEL == TRACE_LEVEL_NO_TRACE)
#define NOTRACE
#endif
#endif
/* ------------------------------------------------------------------------------
* Global Macros
* ------------------------------------------------------------------------------
*/
extern void TRACE_CONFIGURE( uint32_t dwBaudRate, uint32_t dwMCk ) ;
/**
* Initializes the DBGU for ISP project
*
* \param mode DBGU mode.
* \param baudrate DBGU baudrate.
* \param mck Master clock frequency.
*/
#ifndef DYNTRACE
#define DYNTRACE 0
#endif
#if (TRACE_LEVEL==0) && (DYNTRACE==0)
#define TRACE_CONFIGURE_ISP(mode, baudrate, mck) {}
#else
#define TRACE_CONFIGURE_ISP(mode, baudrate, mck) { \
const Pin pinsUART0[] = {PINS_UART}; \
PIO_Configure(pinsUART0, PIO_LISTSIZE(pinsUART0)); \
UART_Configure( baudrate, mck ) ; \
}
#endif
/**
* Outputs a formatted string using 'printf' if the log level is high
* enough. Can be disabled by defining TRACE_LEVEL=0 during compilation.
* \param ... Additional parameters depending on formatted string.
*/
#if defined(NOTRACE)
/* Empty macro */
#define TRACE_DEBUG(...) { }
#define TRACE_INFO(...) { }
#define TRACE_WARNING(...) { }
#define TRACE_ERROR(...) { }
#define TRACE_FATAL(...) { while(1); }
#define TRACE_DEBUG_WP(...) { }
#define TRACE_INFO_WP(...) { }
#define TRACE_WARNING_WP(...) { }
#define TRACE_ERROR_WP(...) { }
#define TRACE_FATAL_WP(...) { while(1); }
#elif (DYN_TRACES == 1)
/* Trace output depends on dwTraceLevel value */
#define TRACE_DEBUG(...) { if (dwTraceLevel >= TRACE_LEVEL_DEBUG) { printf("-D- " __VA_ARGS__); } }
#define TRACE_INFO(...) { if (dwTraceLevel >= TRACE_LEVEL_INFO) { printf("-I- " __VA_ARGS__); } }
#define TRACE_WARNING(...) { if (dwTraceLevel >= TRACE_LEVEL_WARNING) { printf("-W- " __VA_ARGS__); } }
#define TRACE_ERROR(...) { if (dwTraceLevel >= TRACE_LEVEL_ERROR) { printf("-E- " __VA_ARGS__); } }
#define TRACE_FATAL(...) { if (dwTraceLevel >= TRACE_LEVEL_FATAL) { printf("-F- " __VA_ARGS__); while(1); } }
#define TRACE_DEBUG_WP(...) { if (dwTraceLevel >= TRACE_LEVEL_DEBUG) { printf(__VA_ARGS__); } }
#define TRACE_INFO_WP(...) { if (dwTraceLevel >= TRACE_LEVEL_INFO) { printf(__VA_ARGS__); } }
#define TRACE_WARNING_WP(...) { if (dwTraceLevel >= TRACE_LEVEL_WARNING) { printf(__VA_ARGS__); } }
#define TRACE_ERROR_WP(...) { if (dwTraceLevel >= TRACE_LEVEL_ERROR) { printf(__VA_ARGS__); } }
#define TRACE_FATAL_WP(...) { if (dwTraceLevel >= TRACE_LEVEL_FATAL) { printf(__VA_ARGS__); while(1); } }
#else
/* Trace compilation depends on TRACE_LEVEL value */
#if (TRACE_LEVEL >= TRACE_LEVEL_DEBUG)
#define TRACE_DEBUG(...) { printf("-D- " __VA_ARGS__); }
#define TRACE_DEBUG_WP(...) { printf(__VA_ARGS__); }
#else
#define TRACE_DEBUG(...) { }
#define TRACE_DEBUG_WP(...) { }
#endif
#if (TRACE_LEVEL >= TRACE_LEVEL_INFO)
#define TRACE_INFO(...) { printf("-I- " __VA_ARGS__); }
#define TRACE_INFO_WP(...) { printf(__VA_ARGS__); }
#else
#define TRACE_INFO(...) { }
#define TRACE_INFO_WP(...) { }
#endif
#if (TRACE_LEVEL >= TRACE_LEVEL_WARNING)
#define TRACE_WARNING(...) { printf("-W- " __VA_ARGS__); }
#define TRACE_WARNING_WP(...) { printf(__VA_ARGS__); }
#else
#define TRACE_WARNING(...) { }
#define TRACE_WARNING_WP(...) { }
#endif
#if (TRACE_LEVEL >= TRACE_LEVEL_ERROR)
#define TRACE_ERROR(...) { printf("-E- " __VA_ARGS__); }
#define TRACE_ERROR_WP(...) { printf(__VA_ARGS__); }
#else
#define TRACE_ERROR(...) { }
#define TRACE_ERROR_WP(...) { }
#endif
#if (TRACE_LEVEL >= TRACE_LEVEL_FATAL)
#define TRACE_FATAL(...) { printf("-F- " __VA_ARGS__); while(1); }
#define TRACE_FATAL_WP(...) { printf(__VA_ARGS__); while(1); }
#else
#define TRACE_FATAL(...) { while(1); }
#define TRACE_FATAL_WP(...) { while(1); }
#endif
#endif
/**
* Exported variables
*/
/** Depending on DYN_TRACES, dwTraceLevel is a modifable runtime variable or a define */
#if !defined(NOTRACE) && (DYN_TRACES == 1)
extern uint32_t dwTraceLevel ;
#endif
#endif //#ifndef TRACE_H