diff --git a/android.toolchain.cmake b/android.toolchain.cmake
new file mode 100644
index 0000000..8473271
--- /dev/null
+++ b/android.toolchain.cmake
@@ -0,0 +1,649 @@
+# Copyright (C) 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+cmake_minimum_required(VERSION 3.6.0)
+
+# Subsequent toolchain loading is not really needed.
+if(DEFINED CMAKE_CROSSCOMPILING)
+	return()
+endif()
+
+# Touch toolchain variable to suppress "unused variable" warning.
+if(CMAKE_TOOLCHAIN_FILE)
+endif()
+
+# Compatibility for configurable variables.
+# Compatible with configurable variables from the other toolchain file:
+#         https://github.com/taka-no-me/android-cmake
+# TODO: We should consider dropping compatibility to simplify things once most
+# of our users have migrated to our standard set of configurable variables.
+if(ANDROID_TOOLCHAIN_NAME AND NOT ANDROID_TOOLCHAIN)
+	if(ANDROID_TOOLCHAIN_NAME MATCHES "-clang([0-9].[0-9])?$")
+		set(ANDROID_TOOLCHAIN clang)
+	elseif(ANDROID_TOOLCHAIN_NAME MATCHES "-[0-9].[0-9]$")
+		set(ANDROID_TOOLCHAIN gcc)
+	endif()
+endif()
+if(ANDROID_ABI STREQUAL "armeabi-v7a with NEON")
+	set(ANDROID_ABI armeabi-v7a)
+	set(ANDROID_ARM_NEON TRUE)
+elseif(ANDROID_TOOLCHAIN_NAME AND NOT ANDROID_ABI)
+	if(ANDROID_TOOLCHAIN_NAME MATCHES "^arm-linux-androideabi-")
+		set(ANDROID_ABI armeabi-v7a)
+	elseif(ANDROID_TOOLCHAIN_NAME MATCHES "^aarch64-linux-android-")
+		set(ANDROID_ABI arm64-v8a)
+	elseif(ANDROID_TOOLCHAIN_NAME MATCHES "^x86-")
+		set(ANDROID_ABI x86)
+	elseif(ANDROID_TOOLCHAIN_NAME MATCHES "^x86_64-")
+		set(ANDROID_ABI x86_64)
+	elseif(ANDROID_TOOLCHAIN_NAME MATCHES "^mipsel-linux-android-")
+		set(ANDROID_ABI mips)
+	elseif(ANDROID_TOOLCHAIN_NAME MATCHES "^mips64el-linux-android-")
+		set(ANDROID_ABI mips64)
+	endif()
+endif()
+if(ANDROID_NATIVE_API_LEVEL AND NOT ANDROID_PLATFORM)
+	if(ANDROID_NATIVE_API_LEVEL MATCHES "^android-[0-9]+$")
+		set(ANDROID_PLATFORM ${ANDROID_NATIVE_API_LEVEL})
+	elseif(ANDROID_NATIVE_API_LEVEL MATCHES "^[0-9]+$")
+		set(ANDROID_PLATFORM android-${ANDROID_NATIVE_API_LEVEL})
+	endif()
+endif()
+if(DEFINED ANDROID_APP_PIE AND NOT DEFINED ANDROID_PIE)
+	set(ANDROID_PIE "${ANDROID_APP_PIE}")
+endif()
+if(ANDROID_STL_FORCE_FEATURES AND NOT DEFINED ANDROID_CPP_FEATURES)
+	set(ANDROID_CPP_FEATURES "rtti exceptions")
+endif()
+if(DEFINED ANDROID_NO_UNDEFINED AND NOT DEFINED ANDROID_ALLOW_UNDEFINED_SYMBOLS)
+	if(ANDROID_NO_UNDEFINED)
+		set(ANDROID_ALLOW_UNDEFINED_SYMBOLS FALSE)
+	else()
+		set(ANDROID_ALLOW_UNDEFINED_SYMBOLS TRUE)
+	endif()
+endif()
+if(DEFINED ANDROID_SO_UNDEFINED AND NOT DEFINED ANDROID_ALLOW_UNDEFINED_SYMBOLS)
+	set(ANDROID_ALLOW_UNDEFINED_SYMBOLS "${ANDROID_SO_UNDEFINED}")
+endif()
+if(DEFINED ANDROID_FORCE_ARM_BUILD AND NOT ANDROID_ARM_MODE)
+	if(ANDROID_FORCE_ARM_BUILD)
+		set(ANDROID_ARM_MODE arm)
+	else()
+		set(ANDROID_ARM_MODE thumb)
+	endif()
+endif()
+if(DEFINED ANDROID_NOEXECSTACK AND NOT DEFINED ANDROID_DISABLE_NO_EXECUTE)
+	if(ANDROID_NOEXECSTACK)
+		set(ANDROID_DISABLE_NO_EXECUTE FALSE)
+	else()
+		set(ANDROID_DISABLE_NO_EXECUTE TRUE)
+	endif()
+endif()
+if(DEFINED ANDROID_RELRO AND NOT DEFINED ANDROID_DISABLE_RELRO)
+	if(ANDROID_RELRO)
+		set(ANDROID_DISABLE_RELRO FALSE)
+	else()
+		set(ANDROID_DISABLE_RELRO TRUE)
+	endif()
+endif()
+if(NDK_CCACHE AND NOT ANDROID_CCACHE)
+	set(ANDROID_CCACHE "${NDK_CCACHE}")
+endif()
+
+# Default values for configurable variables.
+if(NOT ANDROID_NDK)
+	if(DEFINED ENV{ANDROID_NDK_HOME}
+			AND IS_DIRECTORY "$ENV{ANDROID_NDK_HOME}")
+		set(ANDROID_NDK "$ENV{ANDROID_NDK_HOME}")
+	elseif(DEFINED ENV{ANDROID_HOME}
+			AND IS_DIRECTORY "$ENV{ANDROID_HOME}/ndk-bundle")
+		set(ANDROID_NDK "$ENV{ANDROID_HOME}/ndk-bundle")
+	elseif(CMAKE_HOST_SYSTEM_NAME STREQUAL Linux
+			AND IS_DIRECTORY "$ENV{HOME}/Android/Sdk/ndk-bundle")
+		set(ANDROID_NDK "$ENV{HOME}/Android/Sdk/ndk-bundle")
+	elseif(CMAKE_HOST_SYSTEM_NAME STREQUAL Darwin
+			AND IS_DIRECTORY "$ENV{HOME}/Library/Android/sdk/ndk-bundle")
+		set(ANDROID_NDK "$ENV{HOME}/Library/Android/sdk/ndk-bundle")
+	elseif(CMAKE_HOST_SYSTEM_NAME STREQUAL Windows
+			AND IS_DIRECTORY "$ENV{LOCALAPPDATA}/Android/Sdk/ndk-bundle")
+		set(ANDROID_NDK "$ENV{LOCALAPPDATA}/Android/Sdk/ndk-bundle")
+	else()
+		message(FATAL_ERROR "Android NDK unspecified.")
+	endif()
+endif()
+file(TO_CMAKE_PATH "${ANDROID_NDK}" ANDROID_NDK)
+if(NOT ANDROID_TOOLCHAIN)
+	set(ANDROID_TOOLCHAIN clang)
+endif()
+if(NOT ANDROID_ABI)
+	set(ANDROID_ABI armeabi-v7a)
+endif()
+if(ANDROID_PLATFORM MATCHES "^android-(10|11)$")
+	set(ANDROID_PLATFORM android-9)
+elseif(ANDROID_PLATFORM STREQUAL android-20)
+	set(ANDROID_PLATFORM android-19)
+elseif(NOT ANDROID_PLATFORM)
+	if(ANDROID_ABI MATCHES "64(-v8a)?$")
+		set(ANDROID_PLATFORM android-21)
+	else()
+		set(ANDROID_PLATFORM android-9)
+	endif()
+endif()
+string(REPLACE "android-" "" ANDROID_PLATFORM_LEVEL ${ANDROID_PLATFORM})
+if(NOT ANDROID_STL)
+	set(ANDROID_STL gnustl_static)
+endif()
+if(NOT DEFINED ANDROID_PIE)
+	if(ANDROID_PLATFORM_LEVEL LESS 16)
+		set(ANDROID_PIE FALSE)
+	else()
+		set(ANDROID_PIE TRUE)
+	endif()
+endif()
+if(NOT ANDROID_ARM_MODE)
+	set(ANDROID_ARM_MODE thumb)
+endif()
+
+# Configurable variables.
+# Modeled after the ndk-build system.
+# For any variables defined in:
+#         https://developer.android.com/ndk/guides/android_mk.html
+#         https://developer.android.com/ndk/guides/application_mk.html
+# if it makes sense for CMake, then replace LOCAL, APP, or NDK with ANDROID, and
+# we have that variable below.
+# The exception is ANDROID_TOOLCHAIN vs NDK_TOOLCHAIN_VERSION.
+# Since we only have one version of each gcc and clang, specifying a version
+# doesn't make much sense.
+set(ANDROID_NDK                          "${ANDROID_NDK}"                          CACHE FILEPATH "Android NDK")
+set(ANDROID_TOOLCHAIN                    "${ANDROID_TOOLCHAIN}"                    CACHE STRING   "Android toolchain")
+set(ANDROID_ABI                          "${ANDROID_ABI}"                          CACHE STRING   "Android ABI")
+set(ANDROID_PLATFORM                     "${ANDROID_PLATFORM}"                     CACHE STRING   "Android platform")
+set(ANDROID_STL                          "${ANDROID_STL}"                          CACHE STRING   "Android STL")
+set(ANDROID_PIE                          "${ANDROID_PIE}"                          CACHE BOOL     "Android PIE")
+set(ANDROID_CPP_FEATURES                 "${ANDROID_CPP_FEATURES}"                 CACHE STRING   "Android C++ features")
+set(ANDROID_ALLOW_UNDEFINED_SYMBOLS      "${ANDROID_ALLOW_UNDEFINED_SYMBOLS}"      CACHE BOOL     "Android allow undefined symbols")
+set(ANDROID_ARM_MODE                     "${ANDROID_ARM_MODE}"                     CACHE STRING   "Android ARM mode")
+set(ANDROID_ARM_NEON                     "${ANDROID_ARM_NEON}"                     CACHE BOOL     "Android ARM NEON")
+set(ANDROID_DISABLE_NO_EXECUTE           "${ANDROID_DISABLE_NO_EXECUTE}"           CACHE BOOL     "Android disable no execute")
+set(ANDROID_DISABLE_RELRO                "${ANDROID_DISABLE_RELRO}"                CACHE BOOL     "Android disable relocation read-only")
+set(ANDROID_DISABLE_FORMAT_STRING_CHECKS "${ANDROID_DISABLE_FORMAT_STRING_CHECKS}" CACHE BOOL     "Android disable format string checks")
+set(ANDROID_CCACHE                       "${ANDROID_CCACHE}"                       CACHE FILEPATH "Android ccache")
+
+# Export configurable variables for the try_compile() command.
+set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES
+	ANDROID_NDK
+	ANDROID_TOOLCHAIN
+	ANDROID_ABI
+	ANDROID_PLATFORM
+	ANDROID_STL
+	ANDROID_PIE
+	ANDROID_CPP_FEATURES
+	ANDROID_ALLOW_UNDEFINED_SYMBOLS
+	ANDROID_ARM_MODE
+	ANDROID_ARM_NEON
+	ANDROID_DISABLE_NO_EXECUTE
+	ANDROID_DISABLE_RELRO
+	ANDROID_DISABLE_FORMAT_STRING_CHECKS
+	ANDROID_CCACHE)
+
+# Standard cross-compiling stuff.
+set(ANDROID TRUE)
+set(CMAKE_SYSTEM_NAME Android)
+set(CMAKE_SYSTEM_VERSION ${ANDROID_PLATFORM_LEVEL})
+set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
+set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY BOTH)
+set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE BOTH)
+set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE BOTH)
+
+# ABI.
+set(CMAKE_ANDROID_ARCH_ABI ${ANDROID_ABI})
+if(ANDROID_ABI MATCHES "^armeabi(-v7a)?$")
+	set(ANDROID_SYSROOT_ABI arm)
+	set(ANDROID_TOOLCHAIN_NAME arm-linux-androideabi)
+	set(ANDROID_TOOLCHAIN_ROOT ${ANDROID_TOOLCHAIN_NAME})
+	if(ANDROID_ABI STREQUAL armeabi)
+		set(CMAKE_SYSTEM_PROCESSOR armv5te)
+		set(ANDROID_LLVM_TRIPLE armv5te-none-linux-androideabi)
+	elseif(ANDROID_ABI STREQUAL armeabi-v7a)
+		set(CMAKE_SYSTEM_PROCESSOR armv7-a)
+		set(ANDROID_LLVM_TRIPLE armv7-none-linux-androideabi)
+	endif()
+elseif(ANDROID_ABI STREQUAL arm64-v8a)
+	set(ANDROID_SYSROOT_ABI arm64)
+	set(CMAKE_SYSTEM_PROCESSOR aarch64)
+	set(ANDROID_TOOLCHAIN_NAME aarch64-linux-android)
+	set(ANDROID_TOOLCHAIN_ROOT ${ANDROID_TOOLCHAIN_NAME})
+	set(ANDROID_LLVM_TRIPLE aarch64-none-linux-android)
+elseif(ANDROID_ABI STREQUAL x86)
+	set(ANDROID_SYSROOT_ABI x86)
+	set(CMAKE_SYSTEM_PROCESSOR i686)
+	set(ANDROID_TOOLCHAIN_NAME i686-linux-android)
+	set(ANDROID_TOOLCHAIN_ROOT ${ANDROID_ABI})
+	set(ANDROID_LLVM_TRIPLE i686-none-linux-android)
+elseif(ANDROID_ABI STREQUAL x86_64)
+	set(ANDROID_SYSROOT_ABI x86_64)
+	set(CMAKE_SYSTEM_PROCESSOR x86_64)
+	set(ANDROID_TOOLCHAIN_NAME x86_64-linux-android)
+	set(ANDROID_TOOLCHAIN_ROOT ${ANDROID_ABI})
+	set(ANDROID_LLVM_TRIPLE x86_64-none-linux-android)
+elseif(ANDROID_ABI STREQUAL mips)
+	set(ANDROID_SYSROOT_ABI mips)
+	set(CMAKE_SYSTEM_PROCESSOR mips)
+	set(ANDROID_TOOLCHAIN_NAME mipsel-linux-android)
+	set(ANDROID_TOOLCHAIN_ROOT ${ANDROID_TOOLCHAIN_NAME})
+	set(ANDROID_LLVM_TRIPLE mipsel-none-linux-android)
+elseif(ANDROID_ABI STREQUAL mips64)
+	set(ANDROID_SYSROOT_ABI mips64)
+	set(CMAKE_SYSTEM_PROCESSOR mips64)
+	set(ANDROID_TOOLCHAIN_NAME mips64el-linux-android)
+	set(ANDROID_TOOLCHAIN_ROOT ${ANDROID_TOOLCHAIN_NAME})
+	set(ANDROID_LLVM_TRIPLE mips64el-none-linux-android)
+else()
+	message(FATAL_ERROR "Invalid Android ABI: ${ANDROID_ABI}.")
+endif()
+
+# STL.
+set(ANDROID_STL_STATIC_LIBRARIES)
+set(ANDROID_STL_SHARED_LIBRARIES)
+if(ANDROID_STL STREQUAL system)
+	set(ANDROID_STL_STATIC_LIBRARIES
+		supc++)
+elseif(ANDROID_STL STREQUAL stlport_static)
+	set(ANDROID_STL_STATIC_LIBRARIES
+		stlport_static)
+elseif(ANDROID_STL STREQUAL stlport_shared)
+	set(ANDROID_STL_SHARED_LIBRARIES
+		stlport_shared)
+elseif(ANDROID_STL STREQUAL gnustl_static)
+	set(ANDROID_STL_STATIC_LIBRARIES
+		gnustl_static)
+elseif(ANDROID_STL STREQUAL gnustl_shared)
+	set(ANDROID_STL_STATIC_LIBRARIES
+		supc++)
+	set(ANDROID_STL_SHARED_LIBRARIES
+		gnustl_shared)
+elseif(ANDROID_STL STREQUAL c++_static)
+	set(ANDROID_STL_STATIC_LIBRARIES
+		c++_static
+		c++abi
+		unwind
+		android_support)
+elseif(ANDROID_STL STREQUAL c++_shared)
+	set(ANDROID_STL_STATIC_LIBRARIES
+		unwind)
+	set(ANDROID_STL_SHARED_LIBRARIES
+		c++_shared)
+elseif(ANDROID_STL STREQUAL none)
+else()
+	message(FATAL_ERROR "Invalid Android STL: ${ANDROID_STL}.")
+endif()
+
+# Sysroot.
+set(CMAKE_SYSROOT "${ANDROID_NDK}/platforms/${ANDROID_PLATFORM}/arch-${ANDROID_SYSROOT_ABI}")
+
+# Toolchain.
+if(CMAKE_HOST_SYSTEM_NAME STREQUAL Linux)
+	set(ANDROID_HOST_TAG linux-x86_64)
+elseif(CMAKE_HOST_SYSTEM_NAME STREQUAL Darwin)
+	set(ANDROID_HOST_TAG darwin-x86_64)
+elseif(CMAKE_HOST_SYSTEM_NAME STREQUAL Windows)
+	set(ANDROID_HOST_TAG windows-x86_64)
+endif()
+set(ANDROID_TOOLCHAIN_ROOT "${ANDROID_NDK}/toolchains/${ANDROID_TOOLCHAIN_ROOT}-4.9/prebuilt/${ANDROID_HOST_TAG}")
+set(ANDROID_TOOLCHAIN_PREFIX "${ANDROID_TOOLCHAIN_ROOT}/bin/${ANDROID_TOOLCHAIN_NAME}-")
+if(CMAKE_HOST_SYSTEM_NAME STREQUAL Windows)
+	set(ANDROID_TOOLCHAIN_SUFFIX .exe)
+endif()
+if(ANDROID_TOOLCHAIN STREQUAL clang)
+	set(ANDROID_LLVM_TOOLCHAIN_PREFIX "${ANDROID_NDK}/toolchains/llvm/prebuilt/${ANDROID_HOST_TAG}/bin/")
+	set(ANDROID_C_COMPILER   "${ANDROID_LLVM_TOOLCHAIN_PREFIX}clang${ANDROID_TOOLCHAIN_SUFFIX}")
+	set(ANDROID_CXX_COMPILER "${ANDROID_LLVM_TOOLCHAIN_PREFIX}clang++${ANDROID_TOOLCHAIN_SUFFIX}")
+	# Clang can fail to compile if CMake doesn't correctly supply the target and
+	# external toolchain, but to do so, CMake needs to already know that the
+	# compiler is clang. Tell CMake that the compiler is really clang, but don't
+	# use CMakeForceCompiler, since we still want compile checks. We only want
+	# to skip the compiler ID detection step.
+	set(CMAKE_C_COMPILER_ID_RUN TRUE)
+	set(CMAKE_CXX_COMPILER_ID_RUN TRUE)
+	set(CMAKE_C_COMPILER_ID Clang)
+	set(CMAKE_CXX_COMPILER_ID Clang)
+	set(CMAKE_C_COMPILER_TARGET   ${ANDROID_LLVM_TRIPLE})
+	set(CMAKE_CXX_COMPILER_TARGET ${ANDROID_LLVM_TRIPLE})
+	set(CMAKE_C_COMPILER_EXTERNAL_TOOLCHAIN   "${ANDROID_TOOLCHAIN_ROOT}")
+	set(CMAKE_CXX_COMPILER_EXTERNAL_TOOLCHAIN "${ANDROID_TOOLCHAIN_ROOT}")
+elseif(ANDROID_TOOLCHAIN STREQUAL gcc)
+	set(ANDROID_C_COMPILER   "${ANDROID_TOOLCHAIN_PREFIX}gcc${ANDROID_TOOLCHAIN_SUFFIX}")
+	set(ANDROID_CXX_COMPILER "${ANDROID_TOOLCHAIN_PREFIX}g++${ANDROID_TOOLCHAIN_SUFFIX}")
+else()
+	message(FATAL_ERROR "Invalid Android toolchain: ${ANDROID_TOOLCHAIN}.")
+endif()
+
+# Check that the NDK is valid.
+if(NOT IS_DIRECTORY "${ANDROID_NDK}"
+		OR NOT IS_DIRECTORY "${ANDROID_NDK}/platforms"
+		OR NOT IS_DIRECTORY "${ANDROID_NDK}/prebuilt"
+		OR NOT IS_DIRECTORY "${ANDROID_NDK}/sources"
+		OR NOT IS_DIRECTORY "${ANDROID_NDK}/toolchains")
+	message(FATAL_ERROR "Invalid Android NDK: ${ANDROID_NDK}.")
+elseif(NOT IS_DIRECTORY "${ANDROID_NDK}/platforms/${ANDROID_PLATFORM}")
+	message(FATAL_ERROR "Invalid Android platform: ${ANDROID_PLATFORM}.")
+elseif(NOT IS_DIRECTORY "${CMAKE_SYSROOT}")
+	message(FATAL_ERROR "Invalid Android ABI for platform ${ANDROID_PLATFORM}: ${ANDROID_ABI}.")
+endif()
+set(ANDROID_NDK_REVISION 12)
+file(READ "${ANDROID_NDK}/source.properties" ANDROID_NDK_SOURCE_PROPERTIES)
+set(ANDROID_NDK_SOURCE_PROPERTIES_REGEX
+	"^Pkg\\.Desc = Android NDK\nPkg\\.Revision = ([0-9]+\\.[0-9]+\\.[0-9]+(-beta[0-9]+)?)\n$")
+if(NOT ANDROID_NDK_SOURCE_PROPERTIES MATCHES "${ANDROID_NDK_SOURCE_PROPERTIES_REGEX}")
+	message(FATAL_ERROR "Failed to parse Android NDK revision: ${ANDROID_NDK}/source.properties.")
+endif()
+string(REGEX REPLACE "${ANDROID_NDK_SOURCE_PROPERTIES_REGEX}" "\\1"
+	ANDROID_NDK_PACKAGE_REVISION "${ANDROID_NDK_SOURCE_PROPERTIES}")
+if(NOT ANDROID_NDK_PACKAGE_REVISION MATCHES "^${ANDROID_NDK_REVISION}\\.")
+	message(FATAL_ERROR "Invalid Android NDK revision (should be ${ANDROID_NDK_REVISION}): ${ANDROID_NDK_PACKAGE_REVISION}.")
+endif()
+
+set(ANDROID_COMPILER_FLAGS)
+set(ANDROID_COMPILER_FLAGS_CXX)
+set(ANDROID_COMPILER_FLAGS_DEBUG)
+set(ANDROID_COMPILER_FLAGS_RELEASE)
+set(ANDROID_LINKER_FLAGS)
+set(ANDROID_LINKER_FLAGS_EXE)
+
+# Generic flags.
+list(APPEND ANDROID_COMPILER_FLAGS
+	-g
+	-DANDROID
+	-ffunction-sections
+	-funwind-tables
+	-fstack-protector-strong
+	-no-canonical-prefixes)
+list(APPEND ANDROID_COMPILER_FLAGS_CXX
+	-fno-exceptions
+	-fno-rtti)
+list(APPEND ANDROID_LINKER_FLAGS
+	-Wl,--build-id
+	-Wl,--warn-shared-textrel
+	-Wl,--fatal-warnings)
+list(APPEND ANDROID_LINKER_FLAGS_EXE
+	-Wl,--gc-sections
+	-Wl,-z,nocopyreloc)
+
+# Debug and release flags.
+list(APPEND ANDROID_COMPILER_FLAGS_DEBUG
+	-O0)
+if(ANDROID_ABI MATCHES "^armeabi")
+	list(APPEND ANDROID_COMPILER_FLAGS_RELEASE
+		-Os)
+else()
+	list(APPEND ANDROID_COMPILER_FLAGS_RELEASE
+		-O2)
+endif()
+list(APPEND ANDROID_COMPILER_FLAGS_RELEASE
+	-DNDEBUG)
+if(ANDROID_TOOLCHAIN STREQUAL clang)
+	list(APPEND ANDROID_COMPILER_FLAGS_DEBUG
+		-fno-limit-debug-info)
+endif()
+
+# Toolchain and ABI specific flags.
+if(ANDROID_ABI STREQUAL armeabi)
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-march=armv5te
+		-mtune=xscale
+		-msoft-float)
+endif()
+if(ANDROID_ABI STREQUAL armeabi-v7a)
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-march=armv7-a
+		-mfloat-abi=softfp
+		-mfpu=vfpv3-d16)
+	list(APPEND ANDROID_LINKER_FLAGS
+		-Wl,--fix-cortex-a8)
+endif()
+if(ANDROID_ABI MATCHES "^armeabi" AND ANDROID_TOOLCHAIN STREQUAL clang)
+	# Disable integrated-as for better compatibility.
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-fno-integrated-as)
+endif()
+if(ANDROID_ABI STREQUAL mips AND ANDROID_TOOLCHAIN STREQUAL clang)
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-mips32)
+endif()
+
+# STL specific flags.
+if(ANDROID_STL STREQUAL system)
+	set(ANDROID_STL_PREFIX gnu-libstdc++/4.9)
+	set(CMAKE_CXX_STANDARD_INCLUDE_DIRECTORIES
+		"${ANDROID_NDK}/sources/cxx-stl/system/include")
+elseif(ANDROID_STL MATCHES "^stlport_")
+	set(ANDROID_STL_PREFIX stlport)
+	set(CMAKE_CXX_STANDARD_INCLUDE_DIRECTORIES
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}/stlport"
+		"${ANDROID_NDK}/sources/cxx-stl/gabi++/include")
+elseif(ANDROID_STL MATCHES "^gnustl_")
+	set(ANDROID_STL_PREFIX gnu-libstdc++/4.9)
+	set(CMAKE_CXX_STANDARD_INCLUDE_DIRECTORIES
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}/include"
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}/libs/${ANDROID_ABI}/include"
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}/include/backward")
+elseif(ANDROID_STL MATCHES "^c\\+\\+_")
+	set(ANDROID_STL_PREFIX llvm-libc++)
+	if(ANDROID_ABI MATCHES "^armeabi")
+		list(APPEND ANDROID_LINKER_FLAGS
+			-Wl,--exclude-libs,libunwind.a)
+	else()
+		list(REMOVE_ITEM ANDROID_STL_STATIC_LIBRARIES
+			unwind)
+	endif()
+	list(APPEND ANDROID_COMPILER_FLAGS_CXX
+		-std=c++11)
+	if(ANDROID_TOOLCHAIN STREQUAL gcc)
+		list(APPEND ANDROID_COMPILER_FLAGS_CXX
+			-fno-strict-aliasing)
+	endif()
+	set(CMAKE_CXX_STANDARD_INCLUDE_DIRECTORIES
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}/libcxx/include"
+		"${ANDROID_NDK}/sources/android/support/include"
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}abi/libcxxabi/include")
+endif()
+set(ANDROID_CXX_STANDARD_LIBRARIES)
+foreach(library ${ANDROID_STL_STATIC_LIBRARIES})
+	list(APPEND ANDROID_CXX_STANDARD_LIBRARIES
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}/libs/${ANDROID_ABI}/lib${library}.a")
+endforeach()
+foreach(library ${ANDROID_STL_SHARED_LIBRARIES})
+	list(APPEND ANDROID_CXX_STANDARD_LIBRARIES
+		"${ANDROID_NDK}/sources/cxx-stl/${ANDROID_STL_PREFIX}/libs/${ANDROID_ABI}/lib${library}.so")
+endforeach()
+if(ANDROID_ABI STREQUAL armeabi AND NOT ANDROID_STL MATCHES "^(none|system)$")
+	list(APPEND ANDROID_CXX_STANDARD_LIBRARIES
+		-latomic)
+endif()
+string(REPLACE ";" " " ANDROID_CXX_STANDARD_LIBRARIES "${ANDROID_CXX_STANDARD_LIBRARIES}")
+set(CMAKE_C_STANDARD_LIBRARIES "-lm")
+set(CMAKE_CXX_STANDARD_LIBRARIES "${ANDROID_CXX_STANDARD_LIBRARIES}")
+
+# Configuration specific flags.
+if(ANDROID_PIE)
+	set(CMAKE_POSITION_INDEPENDENT_CODE TRUE)
+	list(APPEND ANDROID_LINKER_FLAGS_EXE
+		-pie
+		-fPIE)
+endif()
+if(ANDROID_CPP_FEATURES)
+	separate_arguments(ANDROID_CPP_FEATURES)
+	foreach(feature ${ANDROID_CPP_FEATURES})
+		if(NOT ${feature} MATCHES "^(rtti|exceptions)$")
+			message(FATAL_ERROR "Invalid Android C++ feature: ${feature}.")
+		endif()
+		list(APPEND ANDROID_COMPILER_FLAGS_CXX
+			-f${feature})
+	endforeach()
+	string(REPLACE ";" " " ANDROID_CPP_FEATURES "${ANDROID_CPP_FEATURES}")
+endif()
+if(NOT ANDROID_ALLOW_UNDEFINED_SYMBOLS)
+	list(APPEND ANDROID_LINKER_FLAGS
+		-Wl,--no-undefined)
+endif()
+if(ANDROID_ABI MATCHES "armeabi")
+	if(ANDROID_ARM_MODE STREQUAL thumb)
+		list(APPEND ANDROID_COMPILER_FLAGS
+			-mthumb)
+	elseif(ANDROID_ARM_MODE STREQUAL arm)
+		list(APPEND ANDROID_COMPILER_FLAGS
+			-marm)
+	else()
+		message(FATAL_ERROR "Invalid Android ARM mode: ${ANDROID_ARM_MODE}.")
+	endif()
+	if(ANDROID_STL STREQUAL armeabi-v7a AND ANDROID_ARM_NEON)
+		list(APPEND ANDROID_COMPILER_FLAGS
+			-mfpu=neon)
+	endif()
+endif()
+if(ANDROID_DISABLE_NO_EXECUTE)
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-Wa,--execstack)
+	list(APPEND ANDROID_LINKER_FLAGS
+		-Wl,-z,execstack)
+else()
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-Wa,--noexecstack)
+	list(APPEND ANDROID_LINKER_FLAGS
+		-Wl,-z,noexecstack)
+endif()
+if(ANDROID_DISABLE_RELRO)
+	list(APPEND ANDROID_LINKER_FLAGS
+		-Wl,-z,norelro -Wl,-z,lazy)
+else()
+	list(APPEND ANDROID_LINKER_FLAGS
+		-Wl,-z,relro -Wl,-z,now)
+endif()
+if(ANDROID_DISABLE_FORMAT_STRING_CHECKS)
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-Wno-error=format-security)
+else()
+	list(APPEND ANDROID_COMPILER_FLAGS
+		-Wformat -Werror=format-security)
+endif()
+
+# Convert these lists into strings.
+string(REPLACE ";" " " ANDROID_COMPILER_FLAGS            "${ANDROID_COMPILER_FLAGS}")
+string(REPLACE ";" " " ANDROID_COMPILER_FLAGS_CXX        "${ANDROID_COMPILER_FLAGS_CXX}")
+string(REPLACE ";" " " ANDROID_COMPILER_FLAGS_DEBUG      "${ANDROID_COMPILER_FLAGS_DEBUG}")
+string(REPLACE ";" " " ANDROID_COMPILER_FLAGS_RELEASE    "${ANDROID_COMPILER_FLAGS_RELEASE}")
+string(REPLACE ";" " " ANDROID_LINKER_FLAGS              "${ANDROID_LINKER_FLAGS}")
+string(REPLACE ";" " " ANDROID_LINKER_FLAGS_EXE          "${ANDROID_LINKER_FLAGS_EXE}")
+
+if(ANDROID_CCACHE)
+	set(CMAKE_C_COMPILER        "${ANDROID_CCACHE}"       CACHE FILEPATH "ccache")
+	set(CMAKE_CXX_COMPILER      "${ANDROID_CCACHE}"       CACHE FILEPATH "ccache")
+	set(CMAKE_C_COMPILER_ARG1   "${ANDROID_C_COMPILER}"   CACHE FILEPATH "C compiler")
+	set(CMAKE_CXX_COMPILER_ARG1 "${ANDROID_CXX_COMPILER}" CACHE FILEPATH "C++ compiler")
+else()
+	set(CMAKE_C_COMPILER        "${ANDROID_C_COMPILER}"   CACHE FILEPATH "C compiler")
+	set(CMAKE_CXX_COMPILER      "${ANDROID_CXX_COMPILER}" CACHE FILEPATH "C++ compiler")
+endif()
+set(CMAKE_AR                  "${ANDROID_TOOLCHAIN_PREFIX}gcc-ar${ANDROID_TOOLCHAIN_SUFFIX}"  CACHE FILEPATH "ar")
+set(CMAKE_ASM_COMPILER        "${ANDROID_TOOLCHAIN_PREFIX}gcc${ANDROID_TOOLCHAIN_SUFFIX}"     CACHE FILEPATH "asm compiler")
+set(CMAKE_LINKER              "${ANDROID_TOOLCHAIN_PREFIX}ld${ANDROID_TOOLCHAIN_SUFFIX}"      CACHE FILEPATH "linker")
+set(CMAKE_NM                  "${ANDROID_TOOLCHAIN_PREFIX}nm${ANDROID_TOOLCHAIN_SUFFIX}"      CACHE FILEPATH "nm")
+set(CMAKE_OBJCOPY             "${ANDROID_TOOLCHAIN_PREFIX}objcopy${ANDROID_TOOLCHAIN_SUFFIX}" CACHE FILEPATH "objcopy")
+set(CMAKE_OBJDUMP             "${ANDROID_TOOLCHAIN_PREFIX}objdump${ANDROID_TOOLCHAIN_SUFFIX}" CACHE FILEPATH "objdump")
+set(CMAKE_RANLIB              "${ANDROID_TOOLCHAIN_PREFIX}ranlib${ANDROID_TOOLCHAIN_SUFFIX}"  CACHE FILEPATH "ranlib")
+set(CMAKE_STRIP               "${ANDROID_TOOLCHAIN_PREFIX}strip${ANDROID_TOOLCHAIN_SUFFIX}"   CACHE FILEPATH "strip")
+set(CMAKE_C_FLAGS             "" CACHE STRING "C flags")
+set(CMAKE_CXX_FLAGS           "" CACHE STRING "C++ flags")
+set(CMAKE_C_FLAGS_DEBUG       "" CACHE STRING "C flags debug")
+set(CMAKE_CXX_FLAGS_DEBUG     "" CACHE STRING "C++ flags debug")
+set(CMAKE_C_FLAGS_RELEASE     "" CACHE STRING "C flags release")
+set(CMAKE_CXX_FLAGS_RELEASE   "" CACHE STRING "C++ flags release")
+set(CMAKE_MODULE_LINKER_FLAGS "" CACHE STRING "module linker flags")
+set(CMAKE_SHARED_LINKER_FLAGS "" CACHE STRING "shared linker flags")
+set(CMAKE_EXE_LINKER_FLAGS    "" CACHE STRING "executable linker flags")
+
+set(CMAKE_C_FLAGS             "${ANDROID_COMPILER_FLAGS} ${CMAKE_C_FLAGS}")
+set(CMAKE_CXX_FLAGS           "${ANDROID_COMPILER_FLAGS} ${ANDROID_COMPILER_FLAGS_CXX} ${CMAKE_CXX_FLAGS}")
+set(CMAKE_C_FLAGS_DEBUG       "${ANDROID_COMPILER_FLAGS_DEBUG} ${CMAKE_C_FLAGS_DEBUG}")
+set(CMAKE_CXX_FLAGS_DEBUG     "${ANDROID_COMPILER_FLAGS_DEBUG} ${CMAKE_CXX_FLAGS_DEBUG}")
+set(CMAKE_C_FLAGS_RELEASE     "${ANDROID_COMPILER_FLAGS_RELEASE} ${CMAKE_C_FLAGS_RELEASE}")
+set(CMAKE_CXX_FLAGS_RELEASE   "${ANDROID_COMPILER_FLAGS_RELEASE} ${CMAKE_CXX_FLAGS_RELEASE}")
+set(CMAKE_SHARED_LINKER_FLAGS "${ANDROID_LINKER_FLAGS} ${CMAKE_SHARED_LINKER_FLAGS}")
+set(CMAKE_MODULE_LINKER_FLAGS "${ANDROID_LINKER_FLAGS} ${CMAKE_MODULE_LINKER_FLAGS}")
+set(CMAKE_EXE_LINKER_FLAGS    "${ANDROID_LINKER_FLAGS} ${ANDROID_LINKER_FLAGS_EXE} ${CMAKE_EXE_LINKER_FLAGS}")
+
+# Compatibility for read-only variables.
+# Read-only variables for compatibility with the other toolchain file.
+# We'll keep these around for the existing projects that still use them.
+# TODO: All of the variables here have equivalents in our standard set of
+# configurable variables, so we can remove these once most of our users migrate
+# to those variables.
+set(ANDROID_NATIVE_API_LEVEL ${ANDROID_PLATFORM_LEVEL})
+if(ANDROID_ALLOW_UNDEFINED_SYMBOLS)
+	set(ANDROID_SO_UNDEFINED TRUE)
+else()
+	set(ANDROID_NO_UNDEFINED TRUE)
+endif()
+set(ANDROID_FUNCTION_LEVEL_LINKING TRUE)
+set(ANDROID_GOLD_LINKER TRUE)
+if(NOT ANDROID_DISABLE_NO_EXECUTE)
+	set(ANDROID_NOEXECSTACK TRUE)
+endif()
+if(NOT ANDROID_DISABLE_RELRO)
+	set(ANDROID_RELRO TRUE)
+endif()
+if(ANDROID_ARM_MODE STREQUAL arm)
+	set(ANDROID_FORCE_ARM_BUILD TRUE)
+endif()
+if(ANDROID_CPP_FEATURES MATCHES "rtti"
+		AND ANDROID_CPP_FEATURES MATCHES "exceptions")
+	set(ANDROID_STL_FORCE_FEATURES TRUE)
+endif()
+if(ANDROID_CCACHE)
+	set(NDK_CCACHE "${ANDROID_CCACHE}")
+endif()
+if(ANDROID_TOOLCHAIN STREQUAL clang)
+	set(ANDROID_TOOLCHAIN_NAME ${ANDROID_TOOLCHAIN_NAME}-clang)
+else()
+	set(ANDROID_TOOLCHAIN_NAME ${ANDROID_TOOLCHAIN_NAME}-4.9)
+endif()
+set(ANDROID_NDK_HOST_X64 TRUE)
+set(ANDROID_NDK_LAYOUT RELEASE)
+if(ANDROID_ABI STREQUAL armeabi)
+	set(ARMEABI TRUE)
+elseif(ANDROID_ABI STREQUAL armeabi-v7a)
+	set(ARMEABI_V7A TRUE)
+	if(ANDROID_ARM_NEON)
+		set(NEON TRUE)
+	endif()
+elseif(ANDROID_ABI STREQUAL arm64-v8a)
+	set(ARM64_V8A TRUE)
+elseif(ANDROID_ABI STREQUAL x86)
+	set(X86 TRUE)
+elseif(ANDROID_ABI STREQUAL x86_64)
+	set(X86_64 TRUE)
+elseif(ANDROID_ABI STREQUAL mips)
+	set(MIPS TRUE)
+elseif(ANDROID_ABI STREQUAL MIPS64)
+	set(MIPS64 TRUE)
+endif()
+set(ANDROID_NDK_HOST_SYSTEM_NAME ${ANDROID_HOST_TAG})
+set(ANDROID_NDK_ABI_NAME ${ANDROID_ABI})
+set(ANDROID_NDK_RELEASE r${ANDROID_NDK_REVISION})
+set(ANDROID_ARCH_NAME ${ANDROID_SYSROOT_ABI})
+set(ANDROID_SYSROOT "${CMAKE_SYSROOT}")
+set(TOOL_OS_SUFFIX ${ANDROID_TOOLCHAIN_SUFFIX})
+if(ANDROID_TOOLCHAIN STREQUAL clang)
+	set(ANDROID_COMPILER_IS_CLANG TRUE)
+endif()
diff --git a/bin/ccmake b/bin/ccmake
index 5147a9e..7b8fbc1 100755
--- a/bin/ccmake
+++ b/bin/ccmake
Binary files differ
diff --git a/bin/cmake b/bin/cmake
index 64c9ba1..8d078cb 100755
--- a/bin/cmake
+++ b/bin/cmake
Binary files differ
diff --git a/bin/cmakexbuild b/bin/cmakexbuild
index 6a0cdfb..619caca 100755
--- a/bin/cmakexbuild
+++ b/bin/cmakexbuild
Binary files differ
diff --git a/bin/cpack b/bin/cpack
index 01595a3..01cd427 100755
--- a/bin/cpack
+++ b/bin/cpack
Binary files differ
diff --git a/bin/ctest b/bin/ctest
index f0dbfb4..aacd15c 100755
--- a/bin/ctest
+++ b/bin/ctest
Binary files differ
diff --git a/bin/ninja b/bin/ninja
new file mode 100755
index 0000000..0072d5e
--- /dev/null
+++ b/bin/ninja
Binary files differ
diff --git a/build-cmake.sh b/build-cmake.sh
deleted file mode 100755
index 154bb87..0000000
--- a/build-cmake.sh
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/bash -ex
-# Download & build cmake on the local machine
-# works on Linux, OSX, and Windows (Git Bash)
-# leaves output in /tmp/cmake-build/install/
-# cmake must be installed on Windows
-
-PROJ=cmake
-VER=3.2.3
-MSVS=2013
-
-source $(dirname "$0")/build-common.sh build-common.sh
-
-case "$OS" in
-windows)
-	# wasted a lot of time trying to get it building on windows
-	# makefile building didn't work, maybe I should use devenv building
-	# just copy the binary release into the install location
-	#ZIP=$PROJ-$VER-win32-x86.zip
-	#curl -L http://www.cmake.org/files/v3.2/$ZIP -o $ZIP
-	#unzip $ZIP
-	#mv $PROJ-$VER-win32-x86/* $INSTALL
-	ZIP=$PROJ-$VER.zip  # has \r\n line feeds
-	#curl http://www.cmake.org/files/v3.2/$ZIP -o $ZIP
-	#unzip $ZIP
-	TGZ=$PROJ-$VER.tar.gz  # has \n line feeds
-	curl -L http://www.cmake.org/files/v3.2/$TGZ -o $TGZ
-	tar xzf $TGZ
-	mkdir $RD/build
-	cd $RD/build
-	cmake "$(cygpath -w $RD/$PROJ-$VER)"
-	;;
-*)
-	TGZ=$PROJ-$VER.tar.gz  # has \n line feeds
-	curl -L http://www.cmake.org/files/v3.2/$TGZ -o $TGZ
-	tar xzf $TGZ
-	mkdir $RD/build
-	cd $RD/build
-	$RD/$PROJ-$VER/configure --prefix=$INSTALL
-	make -j$CORES
-	make install
-	;;
-esac
-
-commit_and_push
diff --git a/build-common.sh b/build-common.sh
deleted file mode 100644
index d6d3a32..0000000
--- a/build-common.sh
+++ /dev/null
@@ -1,113 +0,0 @@
-# inputs
-# $PROJ - project name (cmake|ninja|swig)
-# $VER - project version
-# $1 - name of this file
-#
-# this file does the following:
-#
-# 1) define the following env vars
-# OS - linux|darwin|windows
-# USER - username
-# CORES - numer of cores (for parallel builds)
-# PATH (with appropriate compilers)
-# CFLAGS/CXXFLAGS/LDFLAGS
-# RD - root directory for source and object files
-# INSTALL - install directory/git repo root
-# SCRIPT_FILE=absolute path to the parent build script
-# SCRIPT_DIR=absolute path to the parent build script's directory
-# COMMON_FILE=absolute path to this file
-
-#
-# 2) create an empty tmp directory at /tmp/$PROJ-$USER
-# 3) checkout the destination git repo to /tmp/prebuilts/$PROJ/$OS-x86/$VER
-# 4) cd $RD
-
-UNAME="$(uname)"
-case "$UNAME" in
-Linux)
-    SCRATCH=/tmp
-    OS='linux'
-    INSTALL_VER=$VER
-    ;;
-Darwin)
-    SCRATCH=/tmp
-    OS='darwin'
-    OSX_MIN=10.6
-    export CFLAGS="$CFLAGS -mmacosx-version-min=$OSX_MIN"
-    export CXXFLAGS="$CXXFLAGS -mmacosx-version-min=$OSX_MIN"
-    export LDFLAGS="$LDFLAGS -mmacosx-version-min=$OSX_MIN"
-    INSTALL_VER=$VER
-    ;;
-*_NT-*)
-    if [[ "$UNAME" == CYGWIN_NT-* ]]; then
-        PATH_PREFIX=/cygdrive
-    else
-        # MINGW32_NT-*
-        PATH_PREFIX=
-    fi
-    SCRATCH=$PATH_PREFIX/d/src/tmp
-    USER=$USERNAME
-    OS='windows'
-    CORES=$NUMBER_OF_PROCESSORS
-    # VS2013 x64 Native Tools Command Prompt
-    case "$MSVS" in
-    2013)
-        export PATH="$PATH_PREFIX/c/Program Files (x86)/Microsoft Visual Studio 12.0/VC/bin/amd64/":"$PATH_PREFIX/c/Program Files (x86)/Microsoft Visual Studio 12.0/Common7/IDE/":"$PATH"
-        export INCLUDE="C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\VC\\INCLUDE;C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\VC\\ATLMFC\\INCLUDE;C:\\Program Files (x86)\\Windows Kits\\8.1\\include\\shared;C:\\Program Files (x86)\\Windows Kits\\8.1\\include\\um;C:\\Program Files (x86)\\Windows Kits\\8.1\\include\\winrt;"
-        export LIB="C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\VC\\LIB\\amd64;C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\VC\\ATLMFC\\LIB\\amd64;C:\\Program Files (x86)\\Windows Kits\\8.1\\lib\\winv6.3\\um\\x64;"
-        export LIBPATH="C:\\Windows\\Microsoft.NET\\Framework64\\v4.0.30319;C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\VC\\LIB\\amd64;C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\VC\\ATLMFC\\LIB\\amd64;C:\\Program Files (x86)\\Windows Kits\\8.1\\References\\CommonConfiguration\\Neutral;C:\\Program Files (x86)\\Microsoft SDKs\\Windows\\v8.1\\ExtensionSDKs\\Microsoft.VCLibs\\12.0\\References\\CommonConfiguration\\neutral;"
-        INSTALL_VER=${VER}_${MSVS}
-        ;;
-    *)
-        # g++/make build
-        export CC=x86_64-w64-mingw32-gcc
-        export CXX=x86_64-w64-mingw32-g++
-        export LD=x86_64-w64-mingw32-ld
-        ;;
-    esac
-    ;;
-*)
-    exit 1
-    ;;
-esac
-
-RD=$SCRATCH/$PROJ-$USER
-INSTALL="$RD/install"
-
-cd /tmp # windows can't delete if you're in the dir
-rm -rf $RD
-mkdir -p $INSTALL
-mkdir -p $RD
-cd $RD
-
-# OSX lacks a "realpath" bash command
-realpath() {
-    [[ $1 = /* ]] && echo "$1" || echo "$PWD/${1#./}"
-}
-
-SCRIPT_FILE=$(realpath "$0")
-SCRIPT_DIR="$(dirname "$SCRIPT_FILE")"
-COMMON_FILE="$SCRIPT_DIR/$1"
-
-commit_and_push()
-{
-    # check into a local git clone
-    rm -rf $SCRATCH/prebuilts/$PROJ/
-    mkdir -p $SCRATCH/prebuilts/$PROJ/
-    cd $SCRATCH/prebuilts/$PROJ/
-    git clone https://android.googlesource.com/platform/prebuilts/$PROJ/$OS-x86
-    GIT_REPO="$SCRATCH/prebuilts/$PROJ/$OS-x86"
-    cd $GIT_REPO
-    git rm -r * || true  # ignore error caused by empty directory
-    mv $INSTALL/* $GIT_REPO
-    cp $SCRIPT_FILE $GIT_REPO
-    cp $COMMON_FILE $GIT_REPO
-
-    git add .
-    git commit -m "Adding binaries for $INSTALL_VER"
-
-    # execute this command to upload
-    #git push origin HEAD:refs/for/master
-
-    rm -rf $RD || true  # ignore error
-}
diff --git a/doc/cmake-3.2/Copyright.txt b/doc/cmake-3.2/Copyright.txt
deleted file mode 100644
index 6c9fb09..0000000
--- a/doc/cmake-3.2/Copyright.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-CMake - Cross Platform Makefile Generator
-Copyright 2000-2015 Kitware, Inc.
-Copyright 2000-2011 Insight Software Consortium
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-* Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in the
-  documentation and/or other materials provided with the distribution.
-
-* Neither the names of Kitware, Inc., the Insight Software Consortium,
-  nor the names of their contributors may be used to endorse or promote
-  products derived from this software without specific prior written
-  permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-------------------------------------------------------------------------------
-
-The above copyright and license notice applies to distributions of
-CMake in source and binary form.  Some source files contain additional
-notices of original copyright by their contributors; see each source
-for details.  Third-party software packages supplied with CMake under
-compatible licenses provide their own copyright notices documented in
-corresponding subdirectories.
-
-------------------------------------------------------------------------------
-
-CMake was initially developed by Kitware with the following sponsorship:
-
- * National Library of Medicine at the National Institutes of Health
-   as part of the Insight Segmentation and Registration Toolkit (ITK).
-
- * US National Labs (Los Alamos, Livermore, Sandia) ASC Parallel
-   Visualization Initiative.
-
- * National Alliance for Medical Image Computing (NAMIC) is funded by the
-   National Institutes of Health through the NIH Roadmap for Medical Research,
-   Grant U54 EB005149.
-
- * Kitware, Inc.
diff --git a/doc/cmake-3.2/cmcurl/COPYING b/doc/cmake-3.2/cmcurl/COPYING
deleted file mode 100644
index dd990b6..0000000
--- a/doc/cmake-3.2/cmcurl/COPYING
+++ /dev/null
@@ -1,21 +0,0 @@
-COPYRIGHT AND PERMISSION NOTICE
-
-Copyright (c) 1996 - 2014, Daniel Stenberg, <daniel@haxx.se>.
-
-All rights reserved.
-
-Permission to use, copy, modify, and distribute this software for any purpose
-with or without fee is hereby granted, provided that the above copyright
-notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
-NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
-DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
-OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
-OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of a copyright holder shall not
-be used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization of the copyright holder.
diff --git a/doc/cmake-3.2/cmexpat/COPYING b/doc/cmake-3.2/cmexpat/COPYING
deleted file mode 100644
index fc97b02..0000000
--- a/doc/cmake-3.2/cmexpat/COPYING
+++ /dev/null
@@ -1,21 +0,0 @@
-Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
-                               and Clark Cooper
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
diff --git a/doc/cmake-3.2/cmlibarchive/COPYING b/doc/cmake-3.2/cmlibarchive/COPYING
deleted file mode 100644
index b258806..0000000
--- a/doc/cmake-3.2/cmlibarchive/COPYING
+++ /dev/null
@@ -1,60 +0,0 @@
-The libarchive distribution as a whole is Copyright by Tim Kientzle
-and is subject to the copyright notice reproduced at the bottom of
-this file.
-
-Each individual file in this distribution should have a clear
-copyright/licensing statement at the beginning of the file.  If any do
-not, please let me know and I will rectify it.  The following is
-intended to summarize the copyright status of the individual files;
-the actual statements in the files are controlling.
-
-* Except as listed below, all C sources (including .c and .h files)
-  and documentation files are subject to the copyright notice reproduced
-  at the bottom of this file.
-
-* The following source files are also subject in whole or in part to
-  a 3-clause UC Regents copyright; please read the individual source
-  files for details:
-   libarchive/archive_entry.c
-   libarchive/archive_read_support_filter_compress.c
-   libarchive/archive_write_set_filter_compress.c
-   libarchive/mtree.5
-   tar/matching.c
-
-* The following source files are in the public domain:
-   tar/getdate.c
-
-* The build files---including Makefiles, configure scripts,
-  and auxiliary scripts used as part of the compile process---have
-  widely varying licensing terms.  Please check individual files before
-  distributing them to see if those restrictions apply to you.
-
-I intend for all new source code to use the license below and hope over
-time to replace code with other licenses with new implementations that
-do use the license below.  The varying licensing of the build scripts
-seems to be an unavoidable mess.
-
-
-Copyright (c) 2003-2009 <author(s)>
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer
-   in this position and unchanged.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
-IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/doc/cmake-3.6/Copyright.txt b/doc/cmake-3.6/Copyright.txt
new file mode 100644
index 0000000..f99998f
--- /dev/null
+++ b/doc/cmake-3.6/Copyright.txt
@@ -0,0 +1,57 @@
+CMake - Cross Platform Makefile Generator
+Copyright 2000-2016 Kitware, Inc.
+Copyright 2000-2011 Insight Software Consortium
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+* Redistributions of source code must retain the above copyright
+  notice, this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+  notice, this list of conditions and the following disclaimer in the
+  documentation and/or other materials provided with the distribution.
+
+* Neither the names of Kitware, Inc., the Insight Software Consortium,
+  nor the names of their contributors may be used to endorse or promote
+  products derived from this software without specific prior written
+  permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+------------------------------------------------------------------------------
+
+The above copyright and license notice applies to distributions of
+CMake in source and binary form.  Some source files contain additional
+notices of original copyright by their contributors; see each source
+for details.  Third-party software packages supplied with CMake under
+compatible licenses provide their own copyright notices documented in
+corresponding subdirectories.
+
+------------------------------------------------------------------------------
+
+CMake was initially developed by Kitware with the following sponsorship:
+
+ * National Library of Medicine at the National Institutes of Health
+   as part of the Insight Segmentation and Registration Toolkit (ITK).
+
+ * US National Labs (Los Alamos, Livermore, Sandia) ASC Parallel
+   Visualization Initiative.
+
+ * National Alliance for Medical Image Computing (NAMIC) is funded by the
+   National Institutes of Health through the NIH Roadmap for Medical Research,
+   Grant U54 EB005149.
+
+ * Kitware, Inc.
diff --git a/doc/cmake-3.2/cmcompress/Copyright.txt b/doc/cmake-3.6/cmcompress/Copyright.txt
similarity index 100%
rename from doc/cmake-3.2/cmcompress/Copyright.txt
rename to doc/cmake-3.6/cmcompress/Copyright.txt
diff --git a/doc/cmake-3.6/cmcurl/COPYING b/doc/cmake-3.6/cmcurl/COPYING
new file mode 100644
index 0000000..6b5d59f
--- /dev/null
+++ b/doc/cmake-3.6/cmcurl/COPYING
@@ -0,0 +1,21 @@
+COPYRIGHT AND PERMISSION NOTICE
+
+Copyright (c) 1996 - 2015, Daniel Stenberg, <daniel@haxx.se>.
+
+All rights reserved.
+
+Permission to use, copy, modify, and distribute this software for any purpose
+with or without fee is hereby granted, provided that the above copyright
+notice and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN
+NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of a copyright holder shall not
+be used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization of the copyright holder.
diff --git a/doc/cmake-3.6/cmlibarchive/COPYING b/doc/cmake-3.6/cmlibarchive/COPYING
new file mode 100644
index 0000000..93952b7
--- /dev/null
+++ b/doc/cmake-3.6/cmlibarchive/COPYING
@@ -0,0 +1,59 @@
+The libarchive distribution as a whole is Copyright by Tim Kientzle
+and is subject to the copyright notice reproduced at the bottom of
+this file.
+
+Each individual file in this distribution should have a clear
+copyright/licensing statement at the beginning of the file.  If any do
+not, please let me know and I will rectify it.  The following is
+intended to summarize the copyright status of the individual files;
+the actual statements in the files are controlling.
+
+* Except as listed below, all C sources (including .c and .h files)
+  and documentation files are subject to the copyright notice reproduced
+  at the bottom of this file.
+
+* The following source files are also subject in whole or in part to
+  a 3-clause UC Regents copyright; please read the individual source
+  files for details:
+   libarchive/archive_entry.c
+   libarchive/archive_read_support_filter_compress.c
+   libarchive/archive_write_add_filter_compress.c
+   libarchive/mtree.5
+
+* The following source files are in the public domain:
+   libarchive/archive_getdate.c
+
+* The build files---including Makefiles, configure scripts,
+  and auxiliary scripts used as part of the compile process---have
+  widely varying licensing terms.  Please check individual files before
+  distributing them to see if those restrictions apply to you.
+
+I intend for all new source code to use the license below and hope over
+time to replace code with other licenses with new implementations that
+do use the license below.  The varying licensing of the build scripts
+seems to be an unavoidable mess.
+
+
+Copyright (c) 2003-2009 <author(s)>
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer
+   in this position and unchanged.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/doc/cmake-3.2/cmliblzma/COPYING b/doc/cmake-3.6/cmliblzma/COPYING
similarity index 100%
rename from doc/cmake-3.2/cmliblzma/COPYING
rename to doc/cmake-3.6/cmliblzma/COPYING
diff --git a/doc/cmake-3.2/cmsys/Copyright.txt b/doc/cmake-3.6/cmsys/Copyright.txt
similarity index 100%
rename from doc/cmake-3.2/cmsys/Copyright.txt
rename to doc/cmake-3.6/cmsys/Copyright.txt
diff --git a/doc/cmake-3.2/cmzlib/Copyright.txt b/doc/cmake-3.6/cmzlib/Copyright.txt
similarity index 100%
rename from doc/cmake-3.2/cmzlib/Copyright.txt
rename to doc/cmake-3.6/cmzlib/Copyright.txt
diff --git a/share/cmake-3.2/Help/command/FIND_XXX.txt b/share/cmake-3.2/Help/command/FIND_XXX.txt
deleted file mode 100644
index 5889e90..0000000
--- a/share/cmake-3.2/Help/command/FIND_XXX.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-A short-hand signature is:
-
-.. parsed-literal::
-
-   |FIND_XXX| (<VAR> name1 [path1 path2 ...])
-
-The general signature is:
-
-.. parsed-literal::
-
-   |FIND_XXX| (
-             <VAR>
-             name | |NAMES|
-             [HINTS path1 [path2 ... ENV var]]
-             [PATHS path1 [path2 ... ENV var]]
-             [PATH_SUFFIXES suffix1 [suffix2 ...]]
-             [DOC "cache documentation string"]
-             [NO_DEFAULT_PATH]
-             [NO_CMAKE_ENVIRONMENT_PATH]
-             [NO_CMAKE_PATH]
-             [NO_SYSTEM_ENVIRONMENT_PATH]
-             [NO_CMAKE_SYSTEM_PATH]
-             [CMAKE_FIND_ROOT_PATH_BOTH |
-              ONLY_CMAKE_FIND_ROOT_PATH |
-              NO_CMAKE_FIND_ROOT_PATH]
-            )
-
-This command is used to find a |SEARCH_XXX_DESC|.
-A cache entry named by ``<VAR>`` is created to store the result
-of this command.
-If the |SEARCH_XXX| is found the result is stored in the variable
-and the search will not be repeated unless the variable is cleared.
-If nothing is found, the result will be
-``<VAR>-NOTFOUND``, and the search will be attempted again the
-next time |FIND_XXX| is invoked with the same variable.
-The name of the |SEARCH_XXX| that
-is searched for is specified by the names listed
-after the NAMES argument.   Additional search locations
-can be specified after the PATHS argument.  If ENV var is
-found in the HINTS or PATHS section the environment variable var
-will be read and converted from a system environment variable to
-a cmake style list of paths.  For example ENV PATH would be a way
-to list the system path variable. The argument
-after DOC will be used for the documentation string in
-the cache.
-PATH_SUFFIXES specifies additional subdirectories to check below
-each search path.
-
-If NO_DEFAULT_PATH is specified, then no additional paths are
-added to the search.
-If NO_DEFAULT_PATH is not specified, the search process is as follows:
-
-.. |CMAKE_PREFIX_PATH_XXX_SUBDIR| replace::
-   <prefix>/|XXX_SUBDIR| for each <prefix> in CMAKE_PREFIX_PATH
-
-.. |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR| replace::
-   <prefix>/|XXX_SUBDIR| for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
-
-1. Search paths specified in cmake-specific cache variables.
-   These are intended to be used on the command line with a -DVAR=value.
-   This can be skipped if NO_CMAKE_PATH is passed.
-
-   * |CMAKE_PREFIX_PATH_XXX|
-   * |CMAKE_XXX_PATH|
-   * |CMAKE_XXX_MAC_PATH|
-
-2. Search paths specified in cmake-specific environment variables.
-   These are intended to be set in the user's shell configuration.
-   This can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
-
-   * |CMAKE_PREFIX_PATH_XXX|
-   * |CMAKE_XXX_PATH|
-   * |CMAKE_XXX_MAC_PATH|
-
-3. Search the paths specified by the HINTS option.
-   These should be paths computed by system introspection, such as a
-   hint provided by the location of another item already found.
-   Hard-coded guesses should be specified with the PATHS option.
-
-4. Search the standard system environment variables.
-   This can be skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
-
-   * |SYSTEM_ENVIRONMENT_PATH_XXX|
-
-5. Search cmake variables defined in the Platform files
-   for the current system.  This can be skipped if NO_CMAKE_SYSTEM_PATH
-   is passed.
-
-   * |CMAKE_SYSTEM_PREFIX_PATH_XXX|
-   * |CMAKE_SYSTEM_XXX_PATH|
-   * |CMAKE_SYSTEM_XXX_MAC_PATH|
-
-6. Search the paths specified by the PATHS option
-   or in the short-hand version of the command.
-   These are typically hard-coded guesses.
-
-.. |FIND_ARGS_XXX| replace:: <VAR> NAMES name
-
-.. include:: FIND_XXX_MAC.txt
-.. include:: FIND_XXX_ROOT.txt
-.. include:: FIND_XXX_ORDER.txt
diff --git a/share/cmake-3.2/Help/command/FIND_XXX_MAC.txt b/share/cmake-3.2/Help/command/FIND_XXX_MAC.txt
deleted file mode 100644
index eb3900c..0000000
--- a/share/cmake-3.2/Help/command/FIND_XXX_MAC.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-On Darwin or systems supporting OS X Frameworks, the cmake variable
-CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
-
-* FIRST: Try to find frameworks before standard libraries or headers.
-  This is the default on Darwin.
-
-* LAST: Try to find frameworks after standard libraries or headers.
-
-* ONLY: Only try to find frameworks.
-
-* NEVER: Never try to find frameworks.
-
-On Darwin or systems supporting OS X Application Bundles, the cmake
-variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
-following:
-
-* FIRST: Try to find application bundles before standard programs.
-  This is the default on Darwin.
-
-* LAST: Try to find application bundles after standard programs.
-
-* ONLY: Only try to find application bundles.
-
-* NEVER: Never try to find application bundles.
diff --git a/share/cmake-3.2/Help/command/FIND_XXX_ROOT.txt b/share/cmake-3.2/Help/command/FIND_XXX_ROOT.txt
deleted file mode 100644
index b5cab68..0000000
--- a/share/cmake-3.2/Help/command/FIND_XXX_ROOT.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-The CMake variable :variable:`CMAKE_FIND_ROOT_PATH` specifies one or more
-directories to be prepended to all other search directories.  This
-effectively "re-roots" the entire search under given locations.
-Paths which are descendants of the :variable:`CMAKE_STAGING_PREFIX` are excluded
-from this re-rooting, because that variable is always a path on the host system.
-By default the :variable:`CMAKE_FIND_ROOT_PATH` is empty.
-
-The :variable:`CMAKE_SYSROOT` variable can also be used to specify exactly one
-directory to use as a prefix.  Setting :variable:`CMAKE_SYSROOT` also has other
-effects.  See the documentation for that variable for more.
-
-These variables are especially useful when cross-compiling to
-point to the root directory of the target environment and CMake will
-search there too.  By default at first the directories listed in
-:variable:`CMAKE_FIND_ROOT_PATH` are searched, then the :variable:`CMAKE_SYSROOT`
-directory is searched, and then the non-rooted directories will be
-searched.  The default behavior can be adjusted by setting
-|CMAKE_FIND_ROOT_PATH_MODE_XXX|.  This behavior can be manually
-overridden on a per-call basis.  By using CMAKE_FIND_ROOT_PATH_BOTH
-the search order will be as described above.  If
-NO_CMAKE_FIND_ROOT_PATH is used then :variable:`CMAKE_FIND_ROOT_PATH` will not be
-used.  If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
-directories and directories below :variable:`CMAKE_STAGING_PREFIX` will be searched.
diff --git a/share/cmake-3.2/Help/command/add_custom_command.rst b/share/cmake-3.2/Help/command/add_custom_command.rst
deleted file mode 100644
index e646c56..0000000
--- a/share/cmake-3.2/Help/command/add_custom_command.rst
+++ /dev/null
@@ -1,202 +0,0 @@
-add_custom_command
-------------------
-
-Add a custom build rule to the generated build system.
-
-There are two main signatures for ``add_custom_command``.
-
-Generating Files
-^^^^^^^^^^^^^^^^
-
-The first signature is for adding a custom command to produce an output::
-
-  add_custom_command(OUTPUT output1 [output2 ...]
-                     COMMAND command1 [ARGS] [args1...]
-                     [COMMAND command2 [ARGS] [args2...] ...]
-                     [MAIN_DEPENDENCY depend]
-                     [DEPENDS [depends...]]
-                     [BYPRODUCTS [files...]]
-                     [IMPLICIT_DEPENDS <lang1> depend1
-                                      [<lang2> depend2] ...]
-                     [WORKING_DIRECTORY dir]
-                     [COMMENT comment]
-                     [VERBATIM] [APPEND] [USES_TERMINAL])
-
-This defines a command to generate specified ``OUTPUT`` file(s).
-A target created in the same directory (``CMakeLists.txt`` file)
-that specifies any output of the custom command as a source file
-is given a rule to generate the file using the command at build time.
-Do not list the output in more than one independent target that
-may build in parallel or the two instances of the rule may conflict
-(instead use the :command:`add_custom_target` command to drive the
-command and make the other targets depend on that one).
-In makefile terms this creates a new target in the following form::
-
-  OUTPUT: MAIN_DEPENDENCY DEPENDS
-          COMMAND
-
-The options are:
-
-``APPEND``
-  Append the ``COMMAND`` and ``DEPENDS`` option values to the custom
-  command for the first output specified.  There must have already
-  been a previous call to this command with the same output.
-  The ``COMMENT``, ``MAIN_DEPENDENCY``, and ``WORKING_DIRECTORY``
-  options are currently ignored when APPEND is given, but may be
-  used in the future.
-
-``BYPRODUCTS``
-  Specify the files the command is expected to produce but whose
-  modification time may or may not be newer than the dependencies.
-  If a byproduct name is a relative path it will be interpreted
-  relative to the build tree directory corresponding to the
-  current source directory.
-  Each byproduct file will be marked with the :prop_sf:`GENERATED`
-  source file property automatically.
-
-  Explicit specification of byproducts is supported by the
-  :generator:`Ninja` generator to tell the ``ninja`` build tool
-  how to regenerate byproducts when they are missing.  It is
-  also useful when other build rules (e.g. custom commands)
-  depend on the byproducts.  Ninja requires a build rule for any
-  generated file on which another rule depends even if there are
-  order-only dependencies to ensure the byproducts will be
-  available before their dependents build.
-
-  The ``BYPRODUCTS`` option is ignored on non-Ninja generators
-  except to mark byproducts ``GENERATED``.
-
-``COMMAND``
-  Specify the command-line(s) to execute at build time.
-  If more than one ``COMMAND`` is specified they will be executed in order,
-  but *not* necessarily composed into a stateful shell or batch script.
-  (To run a full script, use the :command:`configure_file` command or the
-  :command:`file(GENERATE)` command to create it, and then specify
-  a ``COMMAND`` to launch it.)
-  The optional ``ARGS`` argument is for backward compatibility and
-  will be ignored.
-
-  If ``COMMAND`` specifies an executable target (created by the
-  :command:`add_executable` command) it will automatically be replaced
-  by the location of the executable created at build time.
-  Additionally a target-level dependency will be added so that the
-  executable target will be built before any target using this custom
-  command.  However this does NOT add a file-level dependency that
-  would cause the custom command to re-run whenever the executable is
-  recompiled.
-
-  Arguments to ``COMMAND`` may use
-  :manual:`generator expressions <cmake-generator-expressions(7)>`.
-  References to target names in generator expressions imply target-level
-  dependencies, but NOT file-level dependencies.  List target names with
-  the ``DEPENDS`` option to add file-level dependencies.
-
-``COMMENT``
-  Display the given message before the commands are executed at
-  build time.
-
-``DEPENDS``
-  Specify files on which the command depends.  If any dependency is
-  an ``OUTPUT`` of another custom command in the same directory
-  (``CMakeLists.txt`` file) CMake automatically brings the other
-  custom command into the target in which this command is built.
-  If ``DEPENDS`` is not specified the command will run whenever
-  the ``OUTPUT`` is missing; if the command does not actually
-  create the ``OUTPUT`` then the rule will always run.
-  If ``DEPENDS`` specifies any target (created by the
-  :command:`add_custom_target`, :command:`add_executable`, or
-  :command:`add_library` command) a target-level dependency is
-  created to make sure the target is built before any target
-  using this custom command.  Additionally, if the target is an
-  executable or library a file-level dependency is created to
-  cause the custom command to re-run whenever the target is
-  recompiled.
-
-  Arguments to ``DEPENDS`` may use
-  :manual:`generator expressions <cmake-generator-expressions(7)>`.
-
-``IMPLICIT_DEPENDS``
-  Request scanning of implicit dependencies of an input file.
-  The language given specifies the programming language whose
-  corresponding dependency scanner should be used.
-  Currently only ``C`` and ``CXX`` language scanners are supported.
-  The language has to be specified for every file in the
-  ``IMPLICIT_DEPENDS`` list.  Dependencies discovered from the
-  scanning are added to those of the custom command at build time.
-  Note that the ``IMPLICIT_DEPENDS`` option is currently supported
-  only for Makefile generators and will be ignored by other generators.
-
-``MAIN_DEPENDENCY``
-  Specify the primary input source file to the command.  This is
-  treated just like any value given to the ``DEPENDS`` option
-  but also suggests to Visual Studio generators where to hang
-  the custom command.  At most one custom command may specify a
-  given source file as its main dependency.
-
-``OUTPUT``
-  Specify the output files the command is expected to produce.
-  If an output name is a relative path it will be interpreted
-  relative to the build tree directory corresponding to the
-  current source directory.
-  Each output file will be marked with the :prop_sf:`GENERATED`
-  source file property automatically.
-  If the output of the custom command is not actually created
-  as a file on disk it should be marked with the :prop_sf:`SYMBOLIC`
-  source file property.
-
-``USES_TERMINAL``
-  The command will be given direct access to the terminal if possible.
-  With the :generator:`Ninja` generator, this places the command in
-  the ``console`` :prop_gbl:`pool <JOB_POOLS>`.
-
-``VERBATIM``
-  All arguments to the commands will be escaped properly for the
-  build tool so that the invoked command receives each argument
-  unchanged.  Note that one level of escapes is still used by the
-  CMake language processor before add_custom_command even sees the
-  arguments.  Use of ``VERBATIM`` is recommended as it enables
-  correct behavior.  When ``VERBATIM`` is not given the behavior
-  is platform specific because there is no protection of
-  tool-specific special characters.
-
-``WORKING_DIRECTORY``
-  Execute the command with the given current working directory.
-  If it is a relative path it will be interpreted relative to the
-  build tree directory corresponding to the current source directory.
-
-Build Events
-^^^^^^^^^^^^
-
-The second signature adds a custom command to a target such as a
-library or executable.  This is useful for performing an operation
-before or after building the target.  The command becomes part of the
-target and will only execute when the target itself is built.  If the
-target is already built, the command will not execute.
-
-::
-
-  add_custom_command(TARGET target
-                     PRE_BUILD | PRE_LINK | POST_BUILD
-                     COMMAND command1 [ARGS] [args1...]
-                     [COMMAND command2 [ARGS] [args2...] ...]
-                     [BYPRODUCTS [files...]]
-                     [WORKING_DIRECTORY dir]
-                     [COMMENT comment]
-                     [VERBATIM] [USES_TERMINAL])
-
-This defines a new command that will be associated with building the
-specified target.  When the command will happen is determined by which
-of the following is specified:
-
-``PRE_BUILD``
-  Run before any other rules are executed within the target.
-  This is supported only on Visual Studio 7 or later.
-  For all other generators ``PRE_BUILD`` will be treated as
-  ``PRE_LINK``.
-``PRE_LINK``
-  Run after sources have been compiled but before linking the binary
-  or running the librarian or archiver tool of a static library.
-  This is not defined for targets created by the
-  :command:`add_custom_target` command.
-``POST_BUILD``
-  Run after all other rules within the target have been executed.
diff --git a/share/cmake-3.2/Help/command/add_custom_target.rst b/share/cmake-3.2/Help/command/add_custom_target.rst
deleted file mode 100644
index 82d69db..0000000
--- a/share/cmake-3.2/Help/command/add_custom_target.rst
+++ /dev/null
@@ -1,111 +0,0 @@
-add_custom_target
------------------
-
-Add a target with no output so it will always be built.
-
-::
-
-  add_custom_target(Name [ALL] [command1 [args1...]]
-                    [COMMAND command2 [args2...] ...]
-                    [DEPENDS depend depend depend ... ]
-                    [BYPRODUCTS [files...]]
-                    [WORKING_DIRECTORY dir]
-                    [COMMENT comment]
-                    [VERBATIM] [USES_TERMINAL]
-                    [SOURCES src1 [src2...]])
-
-Adds a target with the given name that executes the given commands.
-The target has no output file and is *always considered out of date*
-even if the commands try to create a file with the name of the target.
-Use the :command:`add_custom_command` command to generate a file with
-dependencies.  By default nothing depends on the custom target.  Use
-the :command:`add_dependencies` command to add dependencies to or
-from other targets.
-
-The options are:
-
-``ALL``
-  Indicate that this target should be added to the default build
-  target so that it will be run every time (the command cannot be
-  called ``ALL``).
-
-``BYPRODUCTS``
-  Specify the files the command is expected to produce but whose
-  modification time may or may not be updated on subsequent builds.
-  If a byproduct name is a relative path it will be interpreted
-  relative to the build tree directory corresponding to the
-  current source directory.
-  Each byproduct file will be marked with the :prop_sf:`GENERATED`
-  source file property automatically.
-
-  Explicit specification of byproducts is supported by the
-  :generator:`Ninja` generator to tell the ``ninja`` build tool
-  how to regenerate byproducts when they are missing.  It is
-  also useful when other build rules (e.g. custom commands)
-  depend on the byproducts.  Ninja requires a build rule for any
-  generated file on which another rule depends even if there are
-  order-only dependencies to ensure the byproducts will be
-  available before their dependents build.
-
-  The ``BYPRODUCTS`` option is ignored on non-Ninja generators
-  except to mark byproducts ``GENERATED``.
-
-``COMMAND``
-  Specify the command-line(s) to execute at build time.
-  If more than one ``COMMAND`` is specified they will be executed in order,
-  but *not* necessarily composed into a stateful shell or batch script.
-  (To run a full script, use the :command:`configure_file` command or the
-  :command:`file(GENERATE)` command to create it, and then specify
-  a ``COMMAND`` to launch it.)
-
-  If ``COMMAND`` specifies an executable target (created by the
-  :command:`add_executable` command) it will automatically be replaced
-  by the location of the executable created at build time.
-  Additionally a target-level dependency will be added so that the
-  executable target will be built before this custom target.
-
-  Arguments to ``COMMAND`` may use
-  :manual:`generator expressions <cmake-generator-expressions(7)>`.
-  References to target names in generator expressions imply target-level
-  dependencies.
-
-  The command and arguments are optional and if not specified an empty
-  target will be created.
-
-``COMMENT``
-  Display the given message before the commands are executed at
-  build time.
-
-``DEPENDS``
-  Reference files and outputs of custom commands created with
-  :command:`add_custom_command` command calls in the same directory
-  (``CMakeLists.txt`` file).  They will be brought up to date when
-  the target is built.
-
-  Use the :command:`add_dependencies` command to add dependencies
-  on other targets.
-
-``SOURCES``
-  Specify additional source files to be included in the custom target.
-  Specified source files will be added to IDE project files for
-  convenience in editing even if they have no build rules.
-
-``VERBATIM``
-  All arguments to the commands will be escaped properly for the
-  build tool so that the invoked command receives each argument
-  unchanged.  Note that one level of escapes is still used by the
-  CMake language processor before ``add_custom_target`` even sees
-  the arguments.  Use of ``VERBATIM`` is recommended as it enables
-  correct behavior.  When ``VERBATIM`` is not given the behavior
-  is platform specific because there is no protection of
-  tool-specific special characters.
-
-``USES_TERMINAL``
-  The command will be given direct access to the terminal if possible.
-  With the :generator:`Ninja` generator, this places the command in
-  the ``console`` :prop_gbl:`pool <JOB_POOLS>`.
-
-``WORKING_DIRECTORY``
-  Execute the command with the given current working directory.
-  If it is a relative path it will be interpreted relative to the
-  build tree directory corresponding to the current source directory.
diff --git a/share/cmake-3.2/Help/command/add_dependencies.rst b/share/cmake-3.2/Help/command/add_dependencies.rst
deleted file mode 100644
index 10997ec..0000000
--- a/share/cmake-3.2/Help/command/add_dependencies.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-add_dependencies
-----------------
-
-Add a dependency between top-level targets.
-
-::
-
-  add_dependencies(<target> [<target-dependency>]...)
-
-Make a top-level <target> depend on other top-level targets to ensure
-that they build before <target> does.  A top-level target is one
-created by ADD_EXECUTABLE, ADD_LIBRARY, or ADD_CUSTOM_TARGET.
-Dependencies added to an IMPORTED target are followed transitively in
-its place since the target itself does not build.
-
-See the DEPENDS option of ADD_CUSTOM_TARGET and ADD_CUSTOM_COMMAND for
-adding file-level dependencies in custom rules.  See the
-OBJECT_DEPENDS option in SET_SOURCE_FILES_PROPERTIES to add file-level
-dependencies to object files.
diff --git a/share/cmake-3.2/Help/command/add_executable.rst b/share/cmake-3.2/Help/command/add_executable.rst
deleted file mode 100644
index 4ed10e1..0000000
--- a/share/cmake-3.2/Help/command/add_executable.rst
+++ /dev/null
@@ -1,80 +0,0 @@
-add_executable
---------------
-
-Add an executable to the project using the specified source files.
-
-::
-
-  add_executable(<name> [WIN32] [MACOSX_BUNDLE]
-                 [EXCLUDE_FROM_ALL]
-                 source1 [source2 ...])
-
-Adds an executable target called ``<name>`` to be built from the source
-files listed in the command invocation.  The ``<name>`` corresponds to the
-logical target name and must be globally unique within a project.  The
-actual file name of the executable built is constructed based on
-conventions of the native platform (such as ``<name>.exe`` or just
-``<name>``.
-
-By default the executable file will be created in the build tree
-directory corresponding to the source tree directory in which the
-command was invoked.  See documentation of the
-:prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` target property to change this
-location.  See documentation of the :prop_tgt:`OUTPUT_NAME` target property
-to change the ``<name>`` part of the final file name.
-
-If ``WIN32`` is given the property :prop_tgt:`WIN32_EXECUTABLE` will be
-set on the target created.  See documentation of that target property for
-details.
-
-If ``MACOSX_BUNDLE`` is given the corresponding property will be set on
-the created target.  See documentation of the :prop_tgt:`MACOSX_BUNDLE`
-target property for details.
-
-If ``EXCLUDE_FROM_ALL`` is given the corresponding property will be set on
-the created target.  See documentation of the :prop_tgt:`EXCLUDE_FROM_ALL`
-target property for details.
-
-Source arguments to ``add_executable`` may use "generator expressions" with
-the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
-
-
---------------------------------------------------------------------------
-
-::
-
-  add_executable(<name> IMPORTED [GLOBAL])
-
-An :ref:`IMPORTED executable target <Imported Targets>` references an
-executable file located outside the project.  No rules are generated to
-build it, and the :prop_tgt:`IMPORTED` target property is ``True``.  The
-target name has scope in the directory in which it is created and below, but
-the ``GLOBAL`` option extends visibility.  It may be referenced like any
-target built within the project.  ``IMPORTED`` executables are useful
-for convenient reference from commands like :command:`add_custom_command`.
-Details about the imported executable are specified by setting properties
-whose names begin in ``IMPORTED_``.  The most important such property is
-:prop_tgt:`IMPORTED_LOCATION` (and its per-configuration version
-:prop_tgt:`IMPORTED_LOCATION_<CONFIG>`) which specifies the location of
-the main executable file on disk.  See documentation of the ``IMPORTED_*``
-properties for more information.
-
---------------------------------------------------------------------------
-
-::
-
-  add_executable(<name> ALIAS <target>)
-
-Creates an :ref:`Alias Target <Alias Targets>`, such that ``<name>`` can
-be used to refer to ``<target>`` in subsequent commands.  The ``<name>``
-does not appear in the generated buildsystem as a make target.  The
-``<target>`` may not be an :ref:`Imported Target <Imported Targets>` or an
-``ALIAS``.  ``ALIAS`` targets can be used as targets to read properties
-from, executables for custom commands and custom targets.  They can also be
-tested for existance with the regular :command:`if(TARGET)` subcommand.
-The ``<name>`` may not be used to modify properties of ``<target>``, that
-is, it may not be used as the operand of :command:`set_property`,
-:command:`set_target_properties`, :command:`target_link_libraries` etc.
-An ``ALIAS`` target may not be installed or exported.
diff --git a/share/cmake-3.2/Help/command/add_library.rst b/share/cmake-3.2/Help/command/add_library.rst
deleted file mode 100644
index 7c06203..0000000
--- a/share/cmake-3.2/Help/command/add_library.rst
+++ /dev/null
@@ -1,154 +0,0 @@
-add_library
------------
-
-.. only:: html
-
-   .. contents::
-
-Add a library to the project using the specified source files.
-
-Normal Libraries
-^^^^^^^^^^^^^^^^
-
-::
-
-  add_library(<name> [STATIC | SHARED | MODULE]
-              [EXCLUDE_FROM_ALL]
-              source1 [source2 ...])
-
-Adds a library target called ``<name>`` to be built from the source files
-listed in the command invocation.  The ``<name>`` corresponds to the
-logical target name and must be globally unique within a project.  The
-actual file name of the library built is constructed based on
-conventions of the native platform (such as ``lib<name>.a`` or
-``<name>.lib``).
-
-``STATIC``, ``SHARED``, or ``MODULE`` may be given to specify the type of
-library to be created.  ``STATIC`` libraries are archives of object files
-for use when linking other targets.  ``SHARED`` libraries are linked
-dynamically and loaded at runtime.  ``MODULE`` libraries are plugins that
-are not linked into other targets but may be loaded dynamically at runtime
-using dlopen-like functionality.  If no type is given explicitly the
-type is ``STATIC`` or ``SHARED`` based on whether the current value of the
-variable :variable:`BUILD_SHARED_LIBS` is ``ON``.  For ``SHARED`` and
-``MODULE`` libraries the :prop_tgt:`POSITION_INDEPENDENT_CODE` target
-property is set to ``ON`` automatically.
-
-By default the library file will be created in the build tree directory
-corresponding to the source tree directory in which the command was
-invoked.  See documentation of the :prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY`,
-:prop_tgt:`LIBRARY_OUTPUT_DIRECTORY`, and
-:prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` target properties to change this
-location.  See documentation of the :prop_tgt:`OUTPUT_NAME` target
-property to change the ``<name>`` part of the final file name.
-
-If ``EXCLUDE_FROM_ALL`` is given the corresponding property will be set on
-the created target.  See documentation of the :prop_tgt:`EXCLUDE_FROM_ALL`
-target property for details.
-
-Source arguments to ``add_library`` may use "generator expressions" with
-the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
-
-Imported Libraries
-^^^^^^^^^^^^^^^^^^
-
-::
-
-  add_library(<name> <SHARED|STATIC|MODULE|UNKNOWN> IMPORTED
-              [GLOBAL])
-
-An :ref:`IMPORTED library target <Imported Targets>` references a library
-file located outside the project.  No rules are generated to build it, and
-the :prop_tgt:`IMPORTED` target property is ``True``.  The target name has
-scope in the directory in which it is created and below, but the ``GLOBAL``
-option extends visibility.  It may be referenced like any target built
-within the project.  ``IMPORTED`` libraries are useful for convenient
-reference from commands like :command:`target_link_libraries`.  Details
-about the imported library are specified by setting properties whose names
-begin in ``IMPORTED_`` and ``INTERFACE_``.  The most important such
-property is :prop_tgt:`IMPORTED_LOCATION` (and its per-configuration
-variant :prop_tgt:`IMPORTED_LOCATION_<CONFIG>`) which specifies the
-location of the main library file on disk.  See documentation of the
-``IMPORTED_*`` and ``INTERFACE_*`` properties for more information.
-
-Object Libraries
-^^^^^^^^^^^^^^^^
-
-::
-
-  add_library(<name> OBJECT <src>...)
-
-Creates an :ref:`Object Library <Object Libraries>`.  An object library
-compiles source files but does not archive or link their object files into a
-library.  Instead other targets created by :command:`add_library` or
-:command:`add_executable` may reference the objects using an expression of the
-form ``$<TARGET_OBJECTS:objlib>`` as a source, where ``objlib`` is the
-object library name.  For example:
-
-.. code-block:: cmake
-
-  add_library(... $<TARGET_OBJECTS:objlib> ...)
-  add_executable(... $<TARGET_OBJECTS:objlib> ...)
-
-will include objlib's object files in a library and an executable
-along with those compiled from their own sources.  Object libraries
-may contain only sources that compile, header files, and other files
-that would not affect linking of a normal library (e.g. ``.txt``).
-They may contain custom commands generating such sources, but not
-``PRE_BUILD``, ``PRE_LINK``, or ``POST_BUILD`` commands.  Object libraries
-cannot be imported, exported, installed, or linked.  Some native build
-systems may not like targets that have only object files, so consider
-adding at least one real source file to any target that references
-``$<TARGET_OBJECTS:objlib>``.
-
-Alias Libraries
-^^^^^^^^^^^^^^^
-
-::
-
-  add_library(<name> ALIAS <target>)
-
-Creates an :ref:`Alias Target <Alias Targets>`, such that ``<name>`` can be
-used to refer to ``<target>`` in subsequent commands.  The ``<name>`` does
-not appear in the generatedbuildsystem as a make target.  The ``<target>``
-may not be an :ref:`Imported Target <Imported Targets>` or an ``ALIAS``.
-``ALIAS`` targets can be used as linkable targets and as targets to
-read properties from.  They can also be tested for existance with the
-regular :command:`if(TARGET)` subcommand.  The ``<name>`` may not be used
-to modify properties of ``<target>``, that is, it may not be used as the
-operand of :command:`set_property`, :command:`set_target_properties`,
-:command:`target_link_libraries` etc.  An ``ALIAS`` target may not be
-installed or exported.
-
-Interface Libraries
-^^^^^^^^^^^^^^^^^^^
-
-::
-
-  add_library(<name> INTERFACE [IMPORTED [GLOBAL]])
-
-Creates an :ref:`Interface Library <Interface Libraries>`.  An ``INTERFACE``
-library target does not directly create build output, though it may
-have properties set on it and it may be installed, exported and
-imported. Typically the ``INTERFACE_*`` properties are populated on
-the interface target using the commands:
-
-* :command:`set_property`,
-* :command:`target_link_libraries(INTERFACE)`,
-* :command:`target_include_directories(INTERFACE)`,
-* :command:`target_compile_options(INTERFACE)`,
-* :command:`target_compile_definitions(INTERFACE)`, and
-* :command:`target_sources(INTERFACE)`,
-
-and then it is used as an argument to :command:`target_link_libraries`
-like any other target.
-
-An ``INTERFACE`` :ref:`Imported Target <Imported Targets>` may also be
-created with this signature.  An ``IMPORTED`` library target references a
-library defined outside the project.  The target name has scope in the
-directory in which it is created and below, but the ``GLOBAL`` option
-extends visibility.  It may be referenced like any target built within
-the project.  ``IMPORTED`` libraries are useful for convenient reference
-from commands like :command:`target_link_libraries`.
diff --git a/share/cmake-3.2/Help/command/add_subdirectory.rst b/share/cmake-3.2/Help/command/add_subdirectory.rst
deleted file mode 100644
index 29b5017..0000000
--- a/share/cmake-3.2/Help/command/add_subdirectory.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-add_subdirectory
-----------------
-
-Add a subdirectory to the build.
-
-::
-
-  add_subdirectory(source_dir [binary_dir]
-                   [EXCLUDE_FROM_ALL])
-
-Add a subdirectory to the build.  The source_dir specifies the
-directory in which the source CMakeLists.txt and code files are
-located.  If it is a relative path it will be evaluated with respect
-to the current directory (the typical usage), but it may also be an
-absolute path.  The binary_dir specifies the directory in which to
-place the output files.  If it is a relative path it will be evaluated
-with respect to the current output directory, but it may also be an
-absolute path.  If binary_dir is not specified, the value of
-source_dir, before expanding any relative path, will be used (the
-typical usage).  The CMakeLists.txt file in the specified source
-directory will be processed immediately by CMake before processing in
-the current input file continues beyond this command.
-
-If the EXCLUDE_FROM_ALL argument is provided then targets in the
-subdirectory will not be included in the ALL target of the parent
-directory by default, and will be excluded from IDE project files.
-Users must explicitly build targets in the subdirectory.  This is
-meant for use when the subdirectory contains a separate part of the
-project that is useful but not necessary, such as a set of examples.
-Typically the subdirectory should contain its own project() command
-invocation so that a full build system will be generated in the
-subdirectory (such as a VS IDE solution file).  Note that inter-target
-dependencies supercede this exclusion.  If a target built by the
-parent project depends on a target in the subdirectory, the dependee
-target will be included in the parent project build system to satisfy
-the dependency.
diff --git a/share/cmake-3.2/Help/command/add_test.rst b/share/cmake-3.2/Help/command/add_test.rst
deleted file mode 100644
index 7e7e6bd..0000000
--- a/share/cmake-3.2/Help/command/add_test.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-add_test
---------
-
-Add a test to the project to be run by :manual:`ctest(1)`.
-
-::
-
-  add_test(NAME <name> COMMAND <command> [<arg>...]
-           [CONFIGURATIONS <config>...]
-           [WORKING_DIRECTORY <dir>])
-
-Add a test called ``<name>``.  The test name may not contain spaces,
-quotes, or other characters special in CMake syntax.  The options are:
-
-``COMMAND``
-  Specify the test command-line.  If ``<command>`` specifies an
-  executable target (created by :command:`add_executable`) it will
-  automatically be replaced by the location of the executable created
-  at build time.
-
-``CONFIGURATIONS``
-  Restrict execution of the test only to the named configurations.
-
-``WORKING_DIRECTORY``
-  Set the :prop_test:`WORKING_DIRECTORY` test property to
-  specify the working directory in which to execute the test.
-  If not specified the test will be run with the current working
-  directory set to the build directory corresponding to the
-  current source directory.
-
-The ``COMMAND`` and ``WORKING_DIRECTORY`` options may use "generator
-expressions" with the syntax ``$<...>``.  See the
-:manual:`cmake-generator-expressions(7)` manual for available expressions.
-
-Example usage::
-
-  add_test(NAME mytest
-           COMMAND testDriver --config $<CONFIGURATION>
-                              --exe $<TARGET_FILE:myexe>)
-
-This creates a test ``mytest`` whose command runs a ``testDriver`` tool
-passing the configuration name and the full path to the executable
-file produced by target ``myexe``.
-
-.. note::
-
-  CMake will generate tests only if the :command:`enable_testing`
-  command has been invoked.  The :module:`CTest` module invokes the
-  command automatically when the ``BUILD_TESTING`` option is ``ON``.
-
----------------------------------------------------------------------
-
-::
-
-  add_test(<name> <command> [<arg>...])
-
-Add a test called ``<name>`` with the given command-line.  Unlike
-the above ``NAME`` signature no transformation is performed on the
-command-line to support target names or generator expressions.
diff --git a/share/cmake-3.2/Help/command/aux_source_directory.rst b/share/cmake-3.2/Help/command/aux_source_directory.rst
deleted file mode 100644
index 434d7a9..0000000
--- a/share/cmake-3.2/Help/command/aux_source_directory.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-aux_source_directory
---------------------
-
-Find all source files in a directory.
-
-::
-
-  aux_source_directory(<dir> <variable>)
-
-Collects the names of all the source files in the specified directory
-and stores the list in the <variable> provided.  This command is
-intended to be used by projects that use explicit template
-instantiation.  Template instantiation files can be stored in a
-"Templates" subdirectory and collected automatically using this
-command to avoid manually listing all instantiations.
-
-It is tempting to use this command to avoid writing the list of source
-files for a library or executable target.  While this seems to work,
-there is no way for CMake to generate a build system that knows when a
-new source file has been added.  Normally the generated build system
-knows when it needs to rerun CMake because the CMakeLists.txt file is
-modified to add a new source.  When the source is just added to the
-directory without modifying this file, one would have to manually
-rerun CMake to generate a build system incorporating the new file.
diff --git a/share/cmake-3.2/Help/command/build_command.rst b/share/cmake-3.2/Help/command/build_command.rst
deleted file mode 100644
index 82a9a42..0000000
--- a/share/cmake-3.2/Help/command/build_command.rst
+++ /dev/null
@@ -1,44 +0,0 @@
-build_command
--------------
-
-Get a command line to build the current project.
-This is mainly intended for internal use by the :module:`CTest` module.
-
-.. code-block:: cmake
-
-  build_command(<variable>
-                [CONFIGURATION <config>]
-                [TARGET <target>]
-                [PROJECT_NAME <projname>] # legacy, causes warning
-               )
-
-Sets the given ``<variable>`` to a command-line string of the form::
-
- <cmake> --build . [--config <config>] [--target <target>] [-- -i]
-
-where ``<cmake>`` is the location of the :manual:`cmake(1)` command-line
-tool, and ``<config>`` and ``<target>`` are the values provided to the
-``CONFIGURATION`` and ``TARGET`` options, if any.  The trailing ``-- -i``
-option is added for Makefile generators.
-
-When invoked, this ``cmake --build`` command line will launch the
-underlying build system tool.
-
-.. code-block:: cmake
-
-  build_command(<cachevariable> <makecommand>)
-
-This second signature is deprecated, but still available for backwards
-compatibility.  Use the first signature instead.
-
-It sets the given ``<cachevariable>`` to a command-line string as
-above but without the ``--config`` or ``--target`` options.
-The ``<makecommand>`` is ignored but should be the full path to
-msdev, devenv, nmake, make or one of the end user build tools
-for legacy invocations.
-
-.. note::
- In CMake versions prior to 3.0 this command returned a command
- line that directly invokes the native build tool for the current
- generator.  Their implementation of the ``PROJECT_NAME`` option
- had no useful effects, so CMake now warns on use of the option.
diff --git a/share/cmake-3.2/Help/command/build_name.rst b/share/cmake-3.2/Help/command/build_name.rst
deleted file mode 100644
index 53cd05e..0000000
--- a/share/cmake-3.2/Help/command/build_name.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-build_name
-----------
-
-Disallowed.  See CMake Policy :policy:`CMP0036`.
-
-Use ${CMAKE_SYSTEM} and ${CMAKE_CXX_COMPILER} instead.
-
-::
-
-  build_name(variable)
-
-Sets the specified variable to a string representing the platform and
-compiler settings.  These values are now available through the
-CMAKE_SYSTEM and CMAKE_CXX_COMPILER variables.
diff --git a/share/cmake-3.2/Help/command/cmake_host_system_information.rst b/share/cmake-3.2/Help/command/cmake_host_system_information.rst
deleted file mode 100644
index ba545d5..0000000
--- a/share/cmake-3.2/Help/command/cmake_host_system_information.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-cmake_host_system_information
------------------------------
-
-Query host system specific information.
-
-::
-
-  cmake_host_system_information(RESULT <variable> QUERY <key> ...)
-
-Queries system information of the host system on which cmake runs.
-One or more <key> can be provided to select the information to be
-queried.  The list of queried values is stored in <variable>.
-
-<key> can be one of the following values:
-
-::
-
-  NUMBER_OF_LOGICAL_CORES   = Number of logical cores.
-  NUMBER_OF_PHYSICAL_CORES  = Number of physical cores.
-  HOSTNAME                  = Hostname.
-  FQDN                      = Fully qualified domain name.
-  TOTAL_VIRTUAL_MEMORY      = Total virtual memory in megabytes.
-  AVAILABLE_VIRTUAL_MEMORY  = Available virtual memory in megabytes.
-  TOTAL_PHYSICAL_MEMORY     = Total physical memory in megabytes.
-  AVAILABLE_PHYSICAL_MEMORY = Available physical memory in megabytes.
diff --git a/share/cmake-3.2/Help/command/cmake_minimum_required.rst b/share/cmake-3.2/Help/command/cmake_minimum_required.rst
deleted file mode 100644
index 1bdffa4..0000000
--- a/share/cmake-3.2/Help/command/cmake_minimum_required.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-cmake_minimum_required
-----------------------
-
-Set the minimum required version of cmake for a project.
-
-::
-
-  cmake_minimum_required(VERSION major[.minor[.patch[.tweak]]]
-                         [FATAL_ERROR])
-
-If the current version of CMake is lower than that required it will
-stop processing the project and report an error.  When a version
-higher than 2.4 is specified the command implicitly invokes
-
-::
-
-  cmake_policy(VERSION major[.minor[.patch[.tweak]]])
-
-which sets the cmake policy version level to the version specified.
-When version 2.4 or lower is given the command implicitly invokes
-
-::
-
-  cmake_policy(VERSION 2.4)
-
-which enables compatibility features for CMake 2.4 and lower.
-
-The FATAL_ERROR option is accepted but ignored by CMake 2.6 and
-higher.  It should be specified so CMake versions 2.4 and lower fail
-with an error instead of just a warning.
diff --git a/share/cmake-3.2/Help/command/cmake_policy.rst b/share/cmake-3.2/Help/command/cmake_policy.rst
deleted file mode 100644
index 2bc3287..0000000
--- a/share/cmake-3.2/Help/command/cmake_policy.rst
+++ /dev/null
@@ -1,94 +0,0 @@
-cmake_policy
-------------
-
-Manage CMake Policy settings.  See the :manual:`cmake-policies(7)`
-manual for defined policies.
-
-As CMake evolves it is sometimes necessary to change existing behavior
-in order to fix bugs or improve implementations of existing features.
-The CMake Policy mechanism is designed to help keep existing projects
-building as new versions of CMake introduce changes in behavior.  Each
-new policy (behavioral change) is given an identifier of the form
-``CMP<NNNN>`` where ``<NNNN>`` is an integer index.  Documentation
-associated with each policy describes the ``OLD`` and ``NEW`` behavior
-and the reason the policy was introduced.  Projects may set each policy
-to select the desired behavior.  When CMake needs to know which behavior
-to use it checks for a setting specified by the project.  If no
-setting is available the ``OLD`` behavior is assumed and a warning is
-produced requesting that the policy be set.
-
-Setting Policies by CMake Version
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The ``cmake_policy`` command is used to set policies to ``OLD`` or ``NEW``
-behavior.  While setting policies individually is supported, we
-encourage projects to set policies based on CMake versions::
-
-  cmake_policy(VERSION major.minor[.patch[.tweak]])
-
-Specify that the current CMake code is written for the given
-version of CMake.  All policies introduced in the specified version or
-earlier will be set to use ``NEW`` behavior.  All policies introduced
-after the specified version will be unset (unless the
-:variable:`CMAKE_POLICY_DEFAULT_CMP<NNNN>` variable sets a default).
-This effectively requests behavior preferred as of a given CMake
-version and tells newer CMake versions to warn about their new policies.
-The policy version specified must be at least 2.4 or the command will
-report an error.
-
-Note that the :command:`cmake_minimum_required(VERSION)`
-command implicitly calls ``cmake_policy(VERSION)`` too.
-
-Setting Policies Explicitly
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  cmake_policy(SET CMP<NNNN> NEW)
-  cmake_policy(SET CMP<NNNN> OLD)
-
-Tell CMake to use the ``OLD`` or ``NEW`` behavior for a given policy.
-Projects depending on the old behavior of a given policy may silence a
-policy warning by setting the policy state to ``OLD``.  Alternatively
-one may fix the project to work with the new behavior and set the
-policy state to ``NEW``.
-
-Checking Policy Settings
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  cmake_policy(GET CMP<NNNN> <variable>)
-
-Check whether a given policy is set to ``OLD`` or ``NEW`` behavior.
-The output ``<variable>`` value will be ``OLD`` or ``NEW`` if the
-policy is set, and empty otherwise.
-
-CMake Policy Stack
-^^^^^^^^^^^^^^^^^^
-
-CMake keeps policy settings on a stack, so changes made by the
-cmake_policy command affect only the top of the stack.  A new entry on
-the policy stack is managed automatically for each subdirectory to
-protect its parents and siblings.  CMake also manages a new entry for
-scripts loaded by :command:`include` and :command:`find_package` commands
-except when invoked with the ``NO_POLICY_SCOPE`` option
-(see also policy :policy:`CMP0011`).
-The ``cmake_policy`` command provides an interface to manage custom
-entries on the policy stack::
-
-  cmake_policy(PUSH)
-  cmake_policy(POP)
-
-Each ``PUSH`` must have a matching ``POP`` to erase any changes.
-This is useful to make temporary changes to policy settings.
-Calls to the :command:`cmake_minimum_required(VERSION)`,
-``cmake_policy(VERSION)``, or ``cmake_policy(SET)`` commands
-influence only the current top of the policy stack.
-
-Commands created by the :command:`function` and :command:`macro`
-commands record policy settings when they are created and
-use the pre-record policies when they are invoked.  If the function or
-macro implementation sets policies, the changes automatically
-propagate up through callers until they reach the closest nested
-policy stack entry.
diff --git a/share/cmake-3.2/Help/command/create_test_sourcelist.rst b/share/cmake-3.2/Help/command/create_test_sourcelist.rst
deleted file mode 100644
index 9addd67..0000000
--- a/share/cmake-3.2/Help/command/create_test_sourcelist.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-create_test_sourcelist
-----------------------
-
-Create a test driver and source list for building test programs.
-
-::
-
-  create_test_sourcelist(sourceListName driverName
-                         test1 test2 test3
-                         EXTRA_INCLUDE include.h
-                         FUNCTION function)
-
-A test driver is a program that links together many small tests into a
-single executable.  This is useful when building static executables
-with large libraries to shrink the total required size.  The list of
-source files needed to build the test driver will be in
-sourceListName.  DriverName is the name of the test driver program.
-The rest of the arguments consist of a list of test source files, can
-be semicolon separated.  Each test source file should have a function
-in it that is the same name as the file with no extension (foo.cxx
-should have int foo(int, char*[]);) DriverName will be able to call
-each of the tests by name on the command line.  If EXTRA_INCLUDE is
-specified, then the next argument is included into the generated file.
-If FUNCTION is specified, then the next argument is taken as a
-function name that is passed a pointer to ac and av.  This can be used
-to add extra command line processing to each test.  The cmake variable
-CMAKE_TESTDRIVER_BEFORE_TESTMAIN can be set to have code that will be
-placed directly before calling the test main function.
-CMAKE_TESTDRIVER_AFTER_TESTMAIN can be set to have code that will be
-placed directly after the call to the test main function.
diff --git a/share/cmake-3.2/Help/command/ctest_build.rst b/share/cmake-3.2/Help/command/ctest_build.rst
deleted file mode 100644
index 4a95cdd..0000000
--- a/share/cmake-3.2/Help/command/ctest_build.rst
+++ /dev/null
@@ -1,29 +0,0 @@
-ctest_build
------------
-
-Build the project.
-
-::
-
-  ctest_build([BUILD build_dir] [TARGET target] [RETURN_VALUE res]
-              [APPEND][NUMBER_ERRORS val] [NUMBER_WARNINGS val])
-
-Builds the given build directory and stores results in Build.xml.  If
-no BUILD is given, the CTEST_BINARY_DIRECTORY variable is used.
-
-The TARGET variable can be used to specify a build target.  If none is
-specified, the "all" target will be built.
-
-The RETURN_VALUE option specifies a variable in which to store the
-return value of the native build tool.  The NUMBER_ERRORS and
-NUMBER_WARNINGS options specify variables in which to store the number
-of build errors and warnings detected.
-
-The APPEND option marks results for append to those previously
-submitted to a dashboard server since the last ctest_start.  Append
-semantics are defined by the dashboard server in use.
-
-If set, the contents of the variable CTEST_BUILD_FLAGS are passed as
-additional arguments to the underlying build command. This can e.g. be
-used to trigger a parallel build using the -j option of make. See
-:module:`ProcessorCount` for an example.
diff --git a/share/cmake-3.2/Help/command/ctest_configure.rst b/share/cmake-3.2/Help/command/ctest_configure.rst
deleted file mode 100644
index 2c4e305..0000000
--- a/share/cmake-3.2/Help/command/ctest_configure.rst
+++ /dev/null
@@ -1,21 +0,0 @@
-ctest_configure
----------------
-
-Configure the project build tree.
-
-::
-
-  ctest_configure([BUILD build_dir] [SOURCE source_dir] [APPEND]
-                  [OPTIONS options] [RETURN_VALUE res])
-
-Configures the given build directory and stores results in
-Configure.xml.  If no BUILD is given, the CTEST_BINARY_DIRECTORY
-variable is used.  If no SOURCE is given, the CTEST_SOURCE_DIRECTORY
-variable is used.  The OPTIONS argument specifies command line
-arguments to pass to the configuration tool.  The RETURN_VALUE option
-specifies a variable in which to store the return value of the native
-build tool.
-
-The APPEND option marks results for append to those previously
-submitted to a dashboard server since the last ctest_start.  Append
-semantics are defined by the dashboard server in use.
diff --git a/share/cmake-3.2/Help/command/ctest_coverage.rst b/share/cmake-3.2/Help/command/ctest_coverage.rst
deleted file mode 100644
index 4c90f9c..0000000
--- a/share/cmake-3.2/Help/command/ctest_coverage.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-ctest_coverage
---------------
-
-Collect coverage tool results.
-
-::
-
-  ctest_coverage([BUILD build_dir] [RETURN_VALUE res] [APPEND]
-                 [LABELS label1 [label2 [...]]])
-
-Perform the coverage of the given build directory and stores results
-in Coverage.xml.  The second argument is a variable that will hold
-value.
-
-The LABELS option filters the coverage report to include only source
-files labeled with at least one of the labels specified.
-
-The APPEND option marks results for append to those previously
-submitted to a dashboard server since the last ctest_start.  Append
-semantics are defined by the dashboard server in use.
diff --git a/share/cmake-3.2/Help/command/ctest_memcheck.rst b/share/cmake-3.2/Help/command/ctest_memcheck.rst
deleted file mode 100644
index ca47ed0..0000000
--- a/share/cmake-3.2/Help/command/ctest_memcheck.rst
+++ /dev/null
@@ -1,28 +0,0 @@
-ctest_memcheck
---------------
-
-Run tests with a dynamic analysis tool.
-
-::
-
-  ctest_memcheck([BUILD build_dir] [RETURN_VALUE res] [APPEND]
-             [START start number] [END end number]
-             [STRIDE stride number] [EXCLUDE exclude regex ]
-             [INCLUDE include regex]
-             [EXCLUDE_LABEL exclude regex]
-             [INCLUDE_LABEL label regex]
-             [PARALLEL_LEVEL level] )
-
-Tests the given build directory and stores results in MemCheck.xml.
-The second argument is a variable that will hold value.  Optionally,
-you can specify the starting test number START, the ending test number
-END, the number of tests to skip between each test STRIDE, a regular
-expression for tests to run INCLUDE, or a regular expression for tests
-not to run EXCLUDE.  EXCLUDE_LABEL and INCLUDE_LABEL are regular
-expressions for tests to be included or excluded by the test property
-LABEL.  PARALLEL_LEVEL should be set to a positive number representing
-the number of tests to be run in parallel.
-
-The APPEND option marks results for append to those previously
-submitted to a dashboard server since the last ctest_start.  Append
-semantics are defined by the dashboard server in use.
diff --git a/share/cmake-3.2/Help/command/ctest_read_custom_files.rst b/share/cmake-3.2/Help/command/ctest_read_custom_files.rst
deleted file mode 100644
index 0bc57cd..0000000
--- a/share/cmake-3.2/Help/command/ctest_read_custom_files.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-ctest_read_custom_files
------------------------
-
-read CTestCustom files.
-
-::
-
-  ctest_read_custom_files( directory ... )
-
-Read all the CTestCustom.ctest or CTestCustom.cmake files from the
-given directory.
diff --git a/share/cmake-3.2/Help/command/ctest_run_script.rst b/share/cmake-3.2/Help/command/ctest_run_script.rst
deleted file mode 100644
index 0f35019..0000000
--- a/share/cmake-3.2/Help/command/ctest_run_script.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-ctest_run_script
-----------------
-
-runs a ctest -S script
-
-::
-
-  ctest_run_script([NEW_PROCESS] script_file_name script_file_name1
-              script_file_name2 ... [RETURN_VALUE var])
-
-Runs a script or scripts much like if it was run from ctest -S.  If no
-argument is provided then the current script is run using the current
-settings of the variables.  If NEW_PROCESS is specified then each
-script will be run in a separate process.If RETURN_VALUE is specified
-the return value of the last script run will be put into var.
diff --git a/share/cmake-3.2/Help/command/ctest_start.rst b/share/cmake-3.2/Help/command/ctest_start.rst
deleted file mode 100644
index d7472db..0000000
--- a/share/cmake-3.2/Help/command/ctest_start.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-ctest_start
------------
-
-Starts the testing for a given model
-
-::
-
-  ctest_start(Model [TRACK <track>] [APPEND] [source [binary]])
-
-Starts the testing for a given model.  The command should be called
-after the binary directory is initialized.  If the 'source' and
-'binary' directory are not specified, it reads the
-:variable:`CTEST_SOURCE_DIRECTORY` and :variable:`CTEST_BINARY_DIRECTORY`.
-If the track is
-specified, the submissions will go to the specified track.  If APPEND
-is used, the existing TAG is used rather than creating a new one based
-on the current time stamp.
-
-If the :variable:`CTEST_CHECKOUT_COMMAND` variable
-(or the :variable:`CTEST_CVS_CHECKOUT` variable)
-is set, its content is treated as command-line.  The command is
-invoked with the current working directory set to the parent of the source
-directory, even if the source directory already exists.  This can be used
-to create the source tree from a version control repository.
diff --git a/share/cmake-3.2/Help/command/ctest_submit.rst b/share/cmake-3.2/Help/command/ctest_submit.rst
deleted file mode 100644
index 2b83ed9..0000000
--- a/share/cmake-3.2/Help/command/ctest_submit.rst
+++ /dev/null
@@ -1,52 +0,0 @@
-ctest_submit
-------------
-
-Submit results to a dashboard server.
-
-::
-
-  ctest_submit([PARTS ...] [FILES ...]
-               [RETRY_COUNT count]
-               [RETRY_DELAY delay]
-               [RETURN_VALUE res]
-               )
-
-By default all available parts are submitted if no PARTS or FILES are
-specified.  The PARTS option lists a subset of parts to be submitted.
-Valid part names are:
-
-::
-
-  Start      = nothing
-  Update     = ctest_update results, in Update.xml
-  Configure  = ctest_configure results, in Configure.xml
-  Build      = ctest_build results, in Build.xml
-  Test       = ctest_test results, in Test.xml
-  Coverage   = ctest_coverage results, in Coverage.xml
-  MemCheck   = ctest_memcheck results, in DynamicAnalysis.xml
-  Notes      = Files listed by CTEST_NOTES_FILES, in Notes.xml
-  ExtraFiles = Files listed by CTEST_EXTRA_SUBMIT_FILES
-  Upload     = Files prepared for upload by ctest_upload(), in Upload.xml
-  Submit     = nothing
-
-The FILES option explicitly lists specific files to be submitted.
-Each individual file must exist at the time of the call.
-
-The RETRY_DELAY option specifies how long in seconds to wait after a
-timed-out submission before attempting to re-submit.
-
-The RETRY_COUNT option specifies how many times to retry a timed-out
-submission.
-
-Submit to CDash Upload API
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  ctest_submit(CDASH_UPLOAD <file> [CDASH_UPLOAD_TYPE <type>])
-
-This second signature is used to upload files to CDash via the CDash
-file upload API. The api first sends a request to upload to CDash along
-with a content hash of the file. If CDash does not already have the file,
-then it is uploaded. Along with the file, a CDash type string is specified
-to tell CDash which handler to use to process the data.
diff --git a/share/cmake-3.2/Help/command/ctest_test.rst b/share/cmake-3.2/Help/command/ctest_test.rst
deleted file mode 100644
index 5f28083..0000000
--- a/share/cmake-3.2/Help/command/ctest_test.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-ctest_test
-----------
-
-Run tests in the project build tree.
-
-::
-
-  ctest_test([BUILD build_dir] [APPEND]
-             [START start number] [END end number]
-             [STRIDE stride number] [EXCLUDE exclude regex ]
-             [INCLUDE include regex] [RETURN_VALUE res]
-             [EXCLUDE_LABEL exclude regex]
-             [INCLUDE_LABEL label regex]
-             [PARALLEL_LEVEL level]
-             [SCHEDULE_RANDOM on]
-             [STOP_TIME time of day])
-
-Tests the given build directory and stores results in Test.xml.  The
-second argument is a variable that will hold value.  Optionally, you
-can specify the starting test number START, the ending test number
-END, the number of tests to skip between each test STRIDE, a regular
-expression for tests to run INCLUDE, or a regular expression for tests
-to not run EXCLUDE.  EXCLUDE_LABEL and INCLUDE_LABEL are regular
-expression for test to be included or excluded by the test property
-LABEL.  PARALLEL_LEVEL should be set to a positive number representing
-the number of tests to be run in parallel.  SCHEDULE_RANDOM will
-launch tests in a random order, and is typically used to detect
-implicit test dependencies.  STOP_TIME is the time of day at which the
-tests should all stop running.
-
-The APPEND option marks results for append to those previously
-submitted to a dashboard server since the last ctest_start.  Append
-semantics are defined by the dashboard server in use.
diff --git a/share/cmake-3.2/Help/command/ctest_update.rst b/share/cmake-3.2/Help/command/ctest_update.rst
deleted file mode 100644
index d34e192..0000000
--- a/share/cmake-3.2/Help/command/ctest_update.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-ctest_update
-------------
-
-Update the work tree from version control.
-
-::
-
-  ctest_update([SOURCE source] [RETURN_VALUE res])
-
-Updates the given source directory and stores results in Update.xml.
-If no SOURCE is given, the CTEST_SOURCE_DIRECTORY variable is used.
-The RETURN_VALUE option specifies a variable in which to store the
-result, which is the number of files updated or -1 on error.
diff --git a/share/cmake-3.2/Help/command/ctest_upload.rst b/share/cmake-3.2/Help/command/ctest_upload.rst
deleted file mode 100644
index 9156af5..0000000
--- a/share/cmake-3.2/Help/command/ctest_upload.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-ctest_upload
-------------
-
-Upload files to a dashboard server.
-
-::
-
-  ctest_upload(FILES ...)
-
-Pass a list of files to be sent along with the build results to the
-dashboard server.
diff --git a/share/cmake-3.2/Help/command/define_property.rst b/share/cmake-3.2/Help/command/define_property.rst
deleted file mode 100644
index 62bcd1b..0000000
--- a/share/cmake-3.2/Help/command/define_property.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-define_property
----------------
-
-Define and document custom properties.
-
-::
-
-  define_property(<GLOBAL | DIRECTORY | TARGET | SOURCE |
-                   TEST | VARIABLE | CACHED_VARIABLE>
-                   PROPERTY <name> [INHERITED]
-                   BRIEF_DOCS <brief-doc> [docs...]
-                   FULL_DOCS <full-doc> [docs...])
-
-Define one property in a scope for use with the set_property and
-get_property commands.  This is primarily useful to associate
-documentation with property names that may be retrieved with the
-get_property command.  The first argument determines the kind of scope
-in which the property should be used.  It must be one of the
-following:
-
-::
-
-  GLOBAL    = associated with the global namespace
-  DIRECTORY = associated with one directory
-  TARGET    = associated with one target
-  SOURCE    = associated with one source file
-  TEST      = associated with a test named with add_test
-  VARIABLE  = documents a CMake language variable
-  CACHED_VARIABLE = documents a CMake cache variable
-
-Note that unlike set_property and get_property no actual scope needs
-to be given; only the kind of scope is important.
-
-The required PROPERTY option is immediately followed by the name of
-the property being defined.
-
-If the INHERITED option then the get_property command will chain up to
-the next higher scope when the requested property is not set in the
-scope given to the command.  DIRECTORY scope chains to GLOBAL.
-TARGET, SOURCE, and TEST chain to DIRECTORY.
-
-The BRIEF_DOCS and FULL_DOCS options are followed by strings to be
-associated with the property as its brief and full documentation.
-Corresponding options to the get_property command will retrieve the
-documentation.
diff --git a/share/cmake-3.2/Help/command/else.rst b/share/cmake-3.2/Help/command/else.rst
deleted file mode 100644
index 5eece95..0000000
--- a/share/cmake-3.2/Help/command/else.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-else
-----
-
-Starts the else portion of an if block.
-
-::
-
-  else(expression)
-
-See the if command.
diff --git a/share/cmake-3.2/Help/command/elseif.rst b/share/cmake-3.2/Help/command/elseif.rst
deleted file mode 100644
index 96ee0e9..0000000
--- a/share/cmake-3.2/Help/command/elseif.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-elseif
-------
-
-Starts the elseif portion of an if block.
-
-::
-
-  elseif(expression)
-
-See the if command.
diff --git a/share/cmake-3.2/Help/command/enable_language.rst b/share/cmake-3.2/Help/command/enable_language.rst
deleted file mode 100644
index d46ff7e..0000000
--- a/share/cmake-3.2/Help/command/enable_language.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-enable_language
----------------
-
-Enable a language (CXX/C/Fortran/etc)
-
-::
-
-  enable_language(<lang> [OPTIONAL] )
-
-This command enables support for the named language in CMake.  This is
-the same as the project command but does not create any of the extra
-variables that are created by the project command.  Example languages
-are CXX, C, Fortran.
-
-This command must be called in file scope, not in a function call.
-Furthermore, it must be called in the highest directory common to all
-targets using the named language directly for compiling sources or
-indirectly through link dependencies.  It is simplest to enable all
-needed languages in the top-level directory of a project.
-
-The OPTIONAL keyword is a placeholder for future implementation and
-does not currently work.
diff --git a/share/cmake-3.2/Help/command/enable_testing.rst b/share/cmake-3.2/Help/command/enable_testing.rst
deleted file mode 100644
index 41ecd5b..0000000
--- a/share/cmake-3.2/Help/command/enable_testing.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-enable_testing
---------------
-
-Enable testing for current directory and below.
-
-::
-
-  enable_testing()
-
-Enables testing for this directory and below.  See also the add_test
-command.  Note that ctest expects to find a test file in the build
-directory root.  Therefore, this command should be in the source
-directory root.
diff --git a/share/cmake-3.2/Help/command/endforeach.rst b/share/cmake-3.2/Help/command/endforeach.rst
deleted file mode 100644
index f23552d..0000000
--- a/share/cmake-3.2/Help/command/endforeach.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-endforeach
-----------
-
-Ends a list of commands in a FOREACH block.
-
-::
-
-  endforeach(expression)
-
-See the FOREACH command.
diff --git a/share/cmake-3.2/Help/command/endfunction.rst b/share/cmake-3.2/Help/command/endfunction.rst
deleted file mode 100644
index 63e70ba..0000000
--- a/share/cmake-3.2/Help/command/endfunction.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-endfunction
------------
-
-Ends a list of commands in a function block.
-
-::
-
-  endfunction(expression)
-
-See the function command.
diff --git a/share/cmake-3.2/Help/command/endif.rst b/share/cmake-3.2/Help/command/endif.rst
deleted file mode 100644
index 4c9955c..0000000
--- a/share/cmake-3.2/Help/command/endif.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-endif
------
-
-Ends a list of commands in an if block.
-
-::
-
-  endif(expression)
-
-See the if command.
diff --git a/share/cmake-3.2/Help/command/endmacro.rst b/share/cmake-3.2/Help/command/endmacro.rst
deleted file mode 100644
index 524fc80..0000000
--- a/share/cmake-3.2/Help/command/endmacro.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-endmacro
---------
-
-Ends a list of commands in a macro block.
-
-::
-
-  endmacro(expression)
-
-See the macro command.
diff --git a/share/cmake-3.2/Help/command/endwhile.rst b/share/cmake-3.2/Help/command/endwhile.rst
deleted file mode 100644
index 11fdc1b..0000000
--- a/share/cmake-3.2/Help/command/endwhile.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-endwhile
---------
-
-Ends a list of commands in a while block.
-
-::
-
-  endwhile(expression)
-
-See the while command.
diff --git a/share/cmake-3.2/Help/command/exec_program.rst b/share/cmake-3.2/Help/command/exec_program.rst
deleted file mode 100644
index aaa0dac..0000000
--- a/share/cmake-3.2/Help/command/exec_program.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-exec_program
-------------
-
-Deprecated.  Use the execute_process() command instead.
-
-Run an executable program during the processing of the CMakeList.txt
-file.
-
-::
-
-  exec_program(Executable [directory in which to run]
-               [ARGS <arguments to executable>]
-               [OUTPUT_VARIABLE <var>]
-               [RETURN_VALUE <var>])
-
-The executable is run in the optionally specified directory.  The
-executable can include arguments if it is double quoted, but it is
-better to use the optional ARGS argument to specify arguments to the
-program.  This is because cmake will then be able to escape spaces in
-the executable path.  An optional argument OUTPUT_VARIABLE specifies a
-variable in which to store the output.  To capture the return value of
-the execution, provide a RETURN_VALUE.  If OUTPUT_VARIABLE is
-specified, then no output will go to the stdout/stderr of the console
-running cmake.
diff --git a/share/cmake-3.2/Help/command/execute_process.rst b/share/cmake-3.2/Help/command/execute_process.rst
deleted file mode 100644
index 478b30e..0000000
--- a/share/cmake-3.2/Help/command/execute_process.rst
+++ /dev/null
@@ -1,75 +0,0 @@
-execute_process
----------------
-
-Execute one or more child processes.
-
-.. code-block:: cmake
-
-  execute_process(COMMAND <cmd1> [args1...]]
-                  [COMMAND <cmd2> [args2...] [...]]
-                  [WORKING_DIRECTORY <directory>]
-                  [TIMEOUT <seconds>]
-                  [RESULT_VARIABLE <variable>]
-                  [OUTPUT_VARIABLE <variable>]
-                  [ERROR_VARIABLE <variable>]
-                  [INPUT_FILE <file>]
-                  [OUTPUT_FILE <file>]
-                  [ERROR_FILE <file>]
-                  [OUTPUT_QUIET]
-                  [ERROR_QUIET]
-                  [OUTPUT_STRIP_TRAILING_WHITESPACE]
-                  [ERROR_STRIP_TRAILING_WHITESPACE])
-
-Runs the given sequence of one or more commands with the standard
-output of each process piped to the standard input of the next.
-A single standard error pipe is used for all processes.
-
-Options:
-
-COMMAND
- A child process command line.
-
- CMake executes the child process using operating system APIs directly.
- All arguments are passed VERBATIM to the child process.
- No intermediate shell is used, so shell operators such as ``>``
- are treated as normal arguments.
- (Use the ``INPUT_*``, ``OUTPUT_*``, and ``ERROR_*`` options to
- redirect stdin, stdout, and stderr.)
-
-WORKING_DIRECTORY
- The named directory will be set as the current working directory of
- the child processes.
-
-TIMEOUT
- The child processes will be terminated if they do not finish in the
- specified number of seconds (fractions are allowed).
-
-RESULT_VARIABLE
- The variable will be set to contain the result of running the processes.
- This will be an integer return code from the last child or a string
- describing an error condition.
-
-OUTPUT_VARIABLE, ERROR_VARIABLE
- The variable named will be set with the contents of the standard output
- and standard error pipes, respectively.  If the same variable is named
- for both pipes their output will be merged in the order produced.
-
-INPUT_FILE, OUTPUT_FILE, ERROR_FILE
- The file named will be attached to the standard input of the first
- process, standard output of the last process, or standard error of
- all processes, respectively.
-
-OUTPUT_QUIET, ERROR_QUIET
- The standard output or standard error results will be quietly ignored.
-
-If more than one ``OUTPUT_*`` or ``ERROR_*`` option is given for the
-same pipe the precedence is not specified.
-If no ``OUTPUT_*`` or ``ERROR_*`` options are given the output will
-be shared with the corresponding pipes of the CMake process itself.
-
-The :command:`execute_process` command is a newer more powerful version of
-:command:`exec_program`, but the old command has been kept for compatibility.
-Both commands run while CMake is processing the project prior to build
-system generation.  Use :command:`add_custom_target` and
-:command:`add_custom_command` to create custom commands that run at
-build time.
diff --git a/share/cmake-3.2/Help/command/export.rst b/share/cmake-3.2/Help/command/export.rst
deleted file mode 100644
index d4bab35..0000000
--- a/share/cmake-3.2/Help/command/export.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-export
-------
-
-Export targets from the build tree for use by outside projects.
-
-::
-
-  export(EXPORT <export-name> [NAMESPACE <namespace>] [FILE <filename>])
-
-Create a file <filename> that may be included by outside projects to
-import targets from the current project's build tree.  This is useful
-during cross-compiling to build utility executables that can run on
-the host platform in one project and then import them into another
-project being compiled for the target platform.  If the NAMESPACE
-option is given the <namespace> string will be prepended to all target
-names written to the file.
-
-Target installations are associated with the export <export-name>
-using the ``EXPORT`` option of the :command:`install(TARGETS)` command.
-
-The file created by this command is specific to the build tree and
-should never be installed.  See the install(EXPORT) command to export
-targets from an installation tree.
-
-The properties set on the generated IMPORTED targets will have the
-same values as the final values of the input TARGETS.
-
-::
-
-  export(TARGETS [target1 [target2 [...]]] [NAMESPACE <namespace>]
-         [APPEND] FILE <filename> [EXPORT_LINK_INTERFACE_LIBRARIES])
-
-This signature is similar to the ``EXPORT`` signature, but targets are listed
-explicitly rather than specified as an export-name.  If the APPEND option is
-given the generated code will be appended to the file instead of overwriting it.
-The EXPORT_LINK_INTERFACE_LIBRARIES keyword, if present, causes the
-contents of the properties matching
-``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?`` to be exported, when
-policy CMP0022 is NEW.  If a library target is included in the export
-but a target to which it links is not included the behavior is
-unspecified.
-
-::
-
-  export(PACKAGE <name>)
-
-Store the current build directory in the CMake user package registry
-for package <name>.  The find_package command may consider the
-directory while searching for package <name>.  This helps dependent
-projects find and use a package from the current project's build tree
-without help from the user.  Note that the entry in the package
-registry that this command creates works only in conjunction with a
-package configuration file (<name>Config.cmake) that works with the
-build tree. In some cases, for example for packaging and for system
-wide installations, it is not desirable to write the user package
-registry. If the :variable:`CMAKE_EXPORT_NO_PACKAGE_REGISTRY` variable
-is enabled, the ``export(PACKAGE)`` command will do nothing.
diff --git a/share/cmake-3.2/Help/command/export_library_dependencies.rst b/share/cmake-3.2/Help/command/export_library_dependencies.rst
deleted file mode 100644
index 73c0b42..0000000
--- a/share/cmake-3.2/Help/command/export_library_dependencies.rst
+++ /dev/null
@@ -1,28 +0,0 @@
-export_library_dependencies
----------------------------
-
-Disallowed.  See CMake Policy :policy:`CMP0033`.
-
-Use :command:`install(EXPORT)` or :command:`export` command.
-
-This command generates an old-style library dependencies file.
-Projects requiring CMake 2.6 or later should not use the command.  Use
-instead the install(EXPORT) command to help export targets from an
-installation tree and the export() command to export targets from a
-build tree.
-
-The old-style library dependencies file does not take into account
-per-configuration names of libraries or the LINK_INTERFACE_LIBRARIES
-target property.
-
-::
-
-  export_library_dependencies(<file> [APPEND])
-
-Create a file named <file> that can be included into a CMake listfile
-with the INCLUDE command.  The file will contain a number of SET
-commands that will set all the variables needed for library dependency
-information.  This should be the last command in the top level
-CMakeLists.txt file of the project.  If the APPEND option is
-specified, the SET commands will be appended to the given file instead
-of replacing it.
diff --git a/share/cmake-3.2/Help/command/file.rst b/share/cmake-3.2/Help/command/file.rst
deleted file mode 100644
index 73d4cfa..0000000
--- a/share/cmake-3.2/Help/command/file.rst
+++ /dev/null
@@ -1,342 +0,0 @@
-file
-----
-
-File manipulation command.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(WRITE <filename> <content>...)
-  file(APPEND <filename> <content>...)
-
-Write ``<content>`` into a file called ``<filename>``.  If the file does
-not exist, it will be created.  If the file already exists, ``WRITE``
-mode will overwrite it and ``APPEND`` mode will append to the end.
-(If the file is a build input, use the :command:`configure_file` command
-to update the file only when its content changes.)
-
-------------------------------------------------------------------------------
-
-::
-
-  file(READ <filename> <variable>
-       [OFFSET <offset>] [LIMIT <max-in>] [HEX])
-
-Read content from a file called ``<filename>`` and store it in a
-``<variable>``.  Optionally start from the given ``<offset>`` and
-read at most ``<max-in>`` bytes.  The ``HEX`` option causes data to
-be converted to a hexadecimal representation (useful for binary data).
-
-------------------------------------------------------------------------------
-
-::
-
-  file(STRINGS <filename> <variable> [<options>...])
-
-Parse a list of ASCII strings from ``<filename>`` and store it in
-``<variable>``.  Binary data in the file are ignored.  Carriage return
-(``\r``, CR) characters are ignored.  The options are:
-
-``LENGTH_MAXIMUM <max-len>``
- Consider only strings of at most a given length.
-
-``LENGTH_MINIMUM <min-len>``
- Consider only strings of at least a given length.
-
-``LIMIT_COUNT <max-num>``
- Limit the number of distinct strings to be extracted.
-
-``LIMIT_INPUT <max-in>``
- Limit the number of input bytes to read from the file.
-
-``LIMIT_OUTPUT <max-out>``
- Limit the number of total bytes to store in the ``<variable>``.
-
-``NEWLINE_CONSUME``
- Treat newline characters (``\n``, LF) as part of string content
- instead of terminating at them.
-
-``NO_HEX_CONVERSION``
- Intel Hex and Motorola S-record files are automatically converted to
- binary while reading unless this option is given.
-
-``REGEX <regex>``
- Consider only strings that match the given regular expression.
-
-``ENCODING <encoding-type>``
- Consider strings of a given encoding.  Currently supported encodings are:
- UTF-8, UTF-16LE, UTF-16BE, UTF-32LE, UTF-32BE.  If the ENCODING option
- is not provided and the file has a Byte Order Mark, the ENCODING option
- will be defaulted to respect the Byte Order Mark.
-
-For example, the code
-
-.. code-block:: cmake
-
-  file(STRINGS myfile.txt myfile)
-
-stores a list in the variable ``myfile`` in which each item is a line
-from the input file.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512> <filename> <variable>)
-
-Compute a cryptographic hash of the content of ``<filename>`` and
-store it in a ``<variable>``.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(GLOB <variable> [RELATIVE <path>] [<globbing-expressions>...])
-  file(GLOB_RECURSE <variable> [RELATIVE <path>]
-       [FOLLOW_SYMLINKS] [<globbing-expressions>...])
-
-Generate a list of files that match the ``<globbing-expressions>`` and
-store it into the ``<variable>``.  Globbing expressions are similar to
-regular expressions, but much simpler.  If ``RELATIVE`` flag is
-specified, the results will be returned as relative paths to the given
-path.
-
-.. note::
-  We do not recommend using GLOB to collect a list of source files from
-  your source tree.  If no CMakeLists.txt file changes when a source is
-  added or removed then the generated build system cannot know when to
-  ask CMake to regenerate.
-
-Examples of globbing expressions include::
-
-  *.cxx      - match all files with extension cxx
-  *.vt?      - match all files with extension vta,...,vtz
-  f[3-5].txt - match files f3.txt, f4.txt, f5.txt
-
-The ``GLOB_RECURSE`` mode will traverse all the subdirectories of the
-matched directory and match the files.  Subdirectories that are symlinks
-are only traversed if ``FOLLOW_SYMLINKS`` is given or policy
-:policy:`CMP0009` is not set to ``NEW``.
-
-Examples of recursive globbing include::
-
-  /dir/*.py  - match all python files in /dir and subdirectories
-
-------------------------------------------------------------------------------
-
-::
-
-  file(RENAME <oldname> <newname>)
-
-Move a file or directory within a filesystem from ``<oldname>`` to
-``<newname>``, replacing the destination atomically.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(REMOVE [<files>...])
-  file(REMOVE_RECURSE [<files>...])
-
-Remove the given files.  The ``REMOVE_RECURSE`` mode will remove the given
-files and directories, also non-empty directories
-
-------------------------------------------------------------------------------
-
-::
-
-  file(MAKE_DIRECTORY [<directories>...])
-
-Create the given directories and their parents as needed.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(RELATIVE_PATH <variable> <directory> <file>)
-
-Compute the relative path from a ``<directory>`` to a ``<file>`` and
-store it in the ``<variable>``.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(TO_CMAKE_PATH "<path>" <variable>)
-  file(TO_NATIVE_PATH "<path>" <variable>)
-
-The ``TO_CMAKE_PATH`` mode converts a native ``<path>`` into a cmake-style
-path with forward-slashes (``/``).  The input can be a single path or a
-system search path like ``$ENV{PATH}``.  A search path will be converted
-to a cmake-style list separated by ``;`` characters.
-
-The ``TO_NATIVE_PATH`` mode converts a cmake-style ``<path>`` into a native
-path with platform-specific slashes (``\`` on Windows and ``/`` elsewhere).
-
-Always use double quotes around the ``<path>`` to be sure it is treated
-as a single argument to this command.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(DOWNLOAD <url> <file> [<options>...])
-  file(UPLOAD   <file> <url> [<options>...])
-
-The ``DOWNLOAD`` mode downloads the given ``<url>`` to a local ``<file>``.
-The ``UPLOAD`` mode uploads a local ``<file>`` to a given ``<url>``.
-
-Options to both ``DOWNLOAD`` and ``UPLOAD`` are:
-
-``INACTIVITY_TIMEOUT <seconds>``
-  Terminate the operation after a period of inactivity.
-
-``LOG <variable>``
-  Store a human-readable log of the operation in a variable.
-
-``SHOW_PROGRESS``
-  Print progress information as status messages until the operation is
-  complete.
-
-``STATUS <variable>``
-  Store the resulting status of the operation in a variable.
-  The status is a ``;`` separated list of length 2.
-  The first element is the numeric return value for the operation,
-  and the second element is a string value for the error.
-  A ``0`` numeric error means no error in the operation.
-
-``TIMEOUT <seconds>``
-  Terminate the operation after a given total time has elapsed.
-
-Additional options to ``DOWNLOAD`` are:
-
-``EXPECTED_HASH ALGO=<value>``
-
-  Verify that the downloaded content hash matches the expected value, where
-  ``ALGO`` is one of ``MD5``, ``SHA1``, ``SHA224``, ``SHA256``, ``SHA384``, or
-  ``SHA512``.  If it does not match, the operation fails with an error.
-
-``EXPECTED_MD5 <value>``
-  Historical short-hand for ``EXPECTED_HASH MD5=<value>``.
-
-``TLS_VERIFY <ON|OFF>``
-  Specify whether to verify the server certificate for ``https://`` URLs.
-  The default is to *not* verify.
-
-``TLS_CAINFO <file>``
-  Specify a custom Certificate Authority file for ``https://`` URLs.
-
-For ``https://`` URLs CMake must be built with OpenSSL support.  ``TLS/SSL``
-certificates are not checked by default.  Set ``TLS_VERIFY`` to ``ON`` to
-check certificates and/or use ``EXPECTED_HASH`` to verify downloaded content.
-If neither ``TLS`` option is given CMake will check variables
-``CMAKE_TLS_VERIFY`` and ``CMAKE_TLS_CAINFO``, respectively.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(TIMESTAMP <filename> <variable> [<format>] [UTC])
-
-Compute a string representation of the modification time of ``<filename>``
-and store it in ``<variable>``.  Should the command be unable to obtain a
-timestamp variable will be set to the empty string ("").
-
-See the :command:`string(TIMESTAMP)` command for documentation of
-the ``<format>`` and ``UTC`` options.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(GENERATE OUTPUT output-file
-       <INPUT input-file|CONTENT content>
-       [CONDITION expression])
-
-Generate an output file for each build configuration supported by the current
-:manual:`CMake Generator <cmake-generators(7)>`.  Evaluate
-:manual:`generator expressions <cmake-generator-expressions(7)>`
-from the input content to produce the output content.  The options are:
-
-``CONDITION <condition>``
-  Generate the output file for a particular configuration only if
-  the condition is true.  The condition must be either ``0`` or ``1``
-  after evaluating generator expressions.
-
-``CONTENT <content>``
-  Use the content given explicitly as input.
-
-``INPUT <input-file>``
-  Use the content from a given file as input.
-
-``OUTPUT <output-file>``
-  Specify the output file name to generate.  Use generator expressions
-  such as ``$<CONFIG>`` to specify a configuration-specific output file
-  name.  Multiple configurations may generate the same output file only
-  if the generated content is identical.  Otherwise, the ``<output-file>``
-  must evaluate to an unique name for each configuration.
-
-Exactly one ``CONTENT`` or ``INPUT`` option must be given.  A specific
-``OUTPUT`` file may be named by at most one invocation of ``file(GENERATE)``.
-Generated files are modified on subsequent cmake runs only if their content
-is changed.
-
-------------------------------------------------------------------------------
-
-::
-
-  file(<COPY|INSTALL> <files>... DESTINATION <dir>
-       [FILE_PERMISSIONS <permissions>...]
-       [DIRECTORY_PERMISSIONS <permissions>...]
-       [NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS]
-       [FILES_MATCHING]
-       [[PATTERN <pattern> | REGEX <regex>]
-        [EXCLUDE] [PERMISSIONS <permissions>...]] [...])
-
-The ``COPY`` signature copies files, directories, and symlinks to a
-destination folder.  Relative input paths are evaluated with respect
-to the current source directory, and a relative destination is
-evaluated with respect to the current build directory.  Copying
-preserves input file timestamps, and optimizes out a file if it exists
-at the destination with the same timestamp.  Copying preserves input
-permissions unless explicit permissions or ``NO_SOURCE_PERMISSIONS``
-are given (default is ``USE_SOURCE_PERMISSIONS``).
-See the :command:`install(DIRECTORY)` command for documentation of
-permissions, ``PATTERN``, ``REGEX``, and ``EXCLUDE`` options.
-
-The ``INSTALL`` signature differs slightly from ``COPY``: it prints
-status messages (subject to the :variable:`CMAKE_INSTALL_MESSAGE` variable),
-and ``NO_SOURCE_PERMISSIONS`` is default.
-Installation scripts generated by the :command:`install` command
-use this signature (with some undocumented options for internal use).
-
-------------------------------------------------------------------------------
-
-::
-
-  file(LOCK <path> [DIRECTORY] [RELEASE]
-       [GUARD <FUNCTION|FILE|PROCESS>]
-       [RESULT_VARIABLE <variable>]
-       [TIMEOUT <seconds>])
-
-Lock a file specified by ``<path>`` if no ``DIRECTORY`` option present and file
-``<path>/cmake.lock`` otherwise. File will be locked for scope defined by
-``GUARD`` option (default value is ``PROCESS``). ``RELEASE`` option can be used
-to unlock file explicitly. If option ``TIMEOUT`` is not specified CMake will
-wait until lock succeed or until fatal error occurs. If ``TIMEOUT`` is set to
-``0`` lock will be tried once and result will be reported immediately. If
-``TIMEOUT`` is not ``0`` CMake will try to lock file for the period specified
-by ``<seconds>`` value. Any errors will be interpreted as fatal if there is no
-``RESULT_VARIABLE`` option. Otherwise result will be stored in ``<variable>``
-and will be ``0`` on success or error message on failure.
-
-Note that lock is advisory - there is no guarantee that other processes will
-respect this lock, i.e. lock synchronize two or more CMake instances sharing
-some modifiable resources. Similar logic applied to ``DIRECTORY`` option -
-locking parent directory doesn't prevent other ``LOCK`` commands to lock any
-child directory or file.
-
-Trying to lock file twice is not allowed.  Any intermediate directories and
-file itself will be created if they not exist.  ``GUARD`` and ``TIMEOUT``
-options ignored on ``RELEASE`` operation.
diff --git a/share/cmake-3.2/Help/command/find_file.rst b/share/cmake-3.2/Help/command/find_file.rst
deleted file mode 100644
index db7e151..0000000
--- a/share/cmake-3.2/Help/command/find_file.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-find_file
----------
-
-.. |FIND_XXX| replace:: find_file
-.. |NAMES| replace:: NAMES name1 [name2 ...]
-.. |SEARCH_XXX| replace:: full path to a file
-.. |SEARCH_XXX_DESC| replace:: full path to named file
-.. |XXX_SUBDIR| replace:: include
-
-.. |CMAKE_PREFIX_PATH_XXX| replace::
-   <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
-   |CMAKE_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_XXX_PATH| replace:: CMAKE_INCLUDE_PATH
-.. |CMAKE_XXX_MAC_PATH| replace:: CMAKE_FRAMEWORK_PATH
-
-.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: PATH and INCLUDE
-
-.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
-   <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
-   |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_SYSTEM_XXX_PATH| replace:: CMAKE_SYSTEM_INCLUDE_PATH
-.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace:: CMAKE_SYSTEM_FRAMEWORK_PATH
-
-.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
-   :variable:`CMAKE_FIND_ROOT_PATH_MODE_INCLUDE`
-
-.. include:: FIND_XXX.txt
diff --git a/share/cmake-3.2/Help/command/find_library.rst b/share/cmake-3.2/Help/command/find_library.rst
deleted file mode 100644
index 91342ba..0000000
--- a/share/cmake-3.2/Help/command/find_library.rst
+++ /dev/null
@@ -1,44 +0,0 @@
-find_library
-------------
-
-.. |FIND_XXX| replace:: find_library
-.. |NAMES| replace:: NAMES name1 [name2 ...] [NAMES_PER_DIR]
-.. |SEARCH_XXX| replace:: library
-.. |SEARCH_XXX_DESC| replace:: library
-.. |XXX_SUBDIR| replace:: lib
-
-.. |CMAKE_PREFIX_PATH_XXX| replace::
-   <prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
-   |CMAKE_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_XXX_PATH| replace:: CMAKE_LIBRARY_PATH
-.. |CMAKE_XXX_MAC_PATH| replace:: CMAKE_FRAMEWORK_PATH
-
-.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: PATH and LIB
-
-.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
-   <prefix>/lib/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
-   |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_SYSTEM_XXX_PATH| replace:: CMAKE_SYSTEM_LIBRARY_PATH
-.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace:: CMAKE_SYSTEM_FRAMEWORK_PATH
-
-.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
-   :variable:`CMAKE_FIND_ROOT_PATH_MODE_LIBRARY`
-
-.. include:: FIND_XXX.txt
-
-When more than one value is given to the NAMES option this command by
-default will consider one name at a time and search every directory
-for it.  The NAMES_PER_DIR option tells this command to consider one
-directory at a time and search for all names in it.
-
-If the library found is a framework, then VAR will be set to the full
-path to the framework <fullPath>/A.framework.  When a full path to a
-framework is used as a library, CMake will use a -framework A, and a
--F<fullPath> to link the framework to the target.
-
-If the global property FIND_LIBRARY_USE_LIB64_PATHS is set all search
-paths will be tested as normal, with "64/" appended, and with all
-matches of "lib/" replaced with "lib64/".  This property is
-automatically set for the platforms that are known to need it if at
-least one of the languages supported by the PROJECT command is
-enabled.
diff --git a/share/cmake-3.2/Help/command/find_package.rst b/share/cmake-3.2/Help/command/find_package.rst
deleted file mode 100644
index 7f518a6..0000000
--- a/share/cmake-3.2/Help/command/find_package.rst
+++ /dev/null
@@ -1,351 +0,0 @@
-find_package
-------------
-
-Load settings for an external project.
-
-::
-
-  find_package(<package> [version] [EXACT] [QUIET] [MODULE]
-               [REQUIRED] [[COMPONENTS] [components...]]
-               [OPTIONAL_COMPONENTS components...]
-               [NO_POLICY_SCOPE])
-
-Finds and loads settings from an external project.  ``<package>_FOUND``
-will be set to indicate whether the package was found.  When the
-package is found package-specific information is provided through
-variables and :ref:`Imported Targets` documented by the package itself.  The
-``QUIET`` option disables messages if the package cannot be found.  The
-``MODULE`` option disables the second signature documented below.  The
-``REQUIRED`` option stops processing with an error message if the package
-cannot be found.
-
-A package-specific list of required components may be listed after the
-``COMPONENTS`` option (or after the ``REQUIRED`` option if present).
-Additional optional components may be listed after
-``OPTIONAL_COMPONENTS``.  Available components and their influence on
-whether a package is considered to be found are defined by the target
-package.
-
-The ``[version]`` argument requests a version with which the package found
-should be compatible (format is ``major[.minor[.patch[.tweak]]]``).  The
-``EXACT`` option requests that the version be matched exactly.  If no
-``[version]`` and/or component list is given to a recursive invocation
-inside a find-module, the corresponding arguments are forwarded
-automatically from the outer call (including the ``EXACT`` flag for
-``[version]``).  Version support is currently provided only on a
-package-by-package basis (details below).
-
-User code should generally look for packages using the above simple
-signature.  The remainder of this command documentation specifies the
-full command signature and details of the search process.  Project
-maintainers wishing to provide a package to be found by this command
-are encouraged to read on.
-
-The command has two modes by which it searches for packages: "Module"
-mode and "Config" mode.  Module mode is available when the command is
-invoked with the above reduced signature.  CMake searches for a file
-called ``Find<package>.cmake`` in the :variable:`CMAKE_MODULE_PATH`
-followed by the CMake installation.  If the file is found, it is read
-and processed by CMake.  It is responsible for finding the package,
-checking the version, and producing any needed messages.  Many
-find-modules provide limited or no support for versioning; check
-the module documentation.  If no module is found and the ``MODULE``
-option is not given the command proceeds to Config mode.
-
-The complete Config mode command signature is::
-
-  find_package(<package> [version] [EXACT] [QUIET]
-               [REQUIRED] [[COMPONENTS] [components...]]
-               [CONFIG|NO_MODULE]
-               [NO_POLICY_SCOPE]
-               [NAMES name1 [name2 ...]]
-               [CONFIGS config1 [config2 ...]]
-               [HINTS path1 [path2 ... ]]
-               [PATHS path1 [path2 ... ]]
-               [PATH_SUFFIXES suffix1 [suffix2 ...]]
-               [NO_DEFAULT_PATH]
-               [NO_CMAKE_ENVIRONMENT_PATH]
-               [NO_CMAKE_PATH]
-               [NO_SYSTEM_ENVIRONMENT_PATH]
-               [NO_CMAKE_PACKAGE_REGISTRY]
-               [NO_CMAKE_BUILDS_PATH]
-               [NO_CMAKE_SYSTEM_PATH]
-               [NO_CMAKE_SYSTEM_PACKAGE_REGISTRY]
-               [CMAKE_FIND_ROOT_PATH_BOTH |
-                ONLY_CMAKE_FIND_ROOT_PATH |
-                NO_CMAKE_FIND_ROOT_PATH])
-
-The ``CONFIG`` option may be used to skip Module mode explicitly and
-switch to Config mode.  It is synonymous to using ``NO_MODULE``.  Config
-mode is also implied by use of options not specified in the reduced
-signature.
-
-Config mode attempts to locate a configuration file provided by the
-package to be found.  A cache entry called ``<package>_DIR`` is created to
-hold the directory containing the file.  By default the command
-searches for a package with the name ``<package>``.  If the ``NAMES`` option
-is given the names following it are used instead of ``<package>``.  The
-command searches for a file called ``<name>Config.cmake`` or
-``<lower-case-name>-config.cmake`` for each name specified.  A
-replacement set of possible configuration file names may be given
-using the ``CONFIGS`` option.  The search procedure is specified below.
-Once found, the configuration file is read and processed by CMake.
-Since the file is provided by the package it already knows the
-location of package contents.  The full path to the configuration file
-is stored in the cmake variable ``<package>_CONFIG``.
-
-All configuration files which have been considered by CMake while
-searching for an installation of the package with an appropriate
-version are stored in the cmake variable ``<package>_CONSIDERED_CONFIGS``,
-the associated versions in ``<package>_CONSIDERED_VERSIONS``.
-
-If the package configuration file cannot be found CMake will generate
-an error describing the problem unless the ``QUIET`` argument is
-specified.  If ``REQUIRED`` is specified and the package is not found a
-fatal error is generated and the configure step stops executing.  If
-``<package>_DIR`` has been set to a directory not containing a
-configuration file CMake will ignore it and search from scratch.
-
-When the ``[version]`` argument is given Config mode will only find a
-version of the package that claims compatibility with the requested
-version (format is ``major[.minor[.patch[.tweak]]]``).  If the ``EXACT``
-option is given only a version of the package claiming an exact match
-of the requested version may be found.  CMake does not establish any
-convention for the meaning of version numbers.  Package version
-numbers are checked by "version" files provided by the packages
-themselves.  For a candidate package configuration file
-``<config-file>.cmake`` the corresponding version file is located next
-to it and named either ``<config-file>-version.cmake`` or
-``<config-file>Version.cmake``.  If no such version file is available
-then the configuration file is assumed to not be compatible with any
-requested version.  A basic version file containing generic version
-matching code can be created using the
-:module:`CMakePackageConfigHelpers` module.  When a version file
-is found it is loaded to check the requested version number.  The
-version file is loaded in a nested scope in which the following
-variables have been defined:
-
-``PACKAGE_FIND_NAME``
-  the ``<package>`` name
-``PACKAGE_FIND_VERSION``
-  full requested version string
-``PACKAGE_FIND_VERSION_MAJOR``
-  major version if requested, else 0
-``PACKAGE_FIND_VERSION_MINOR``
-  minor version if requested, else 0
-``PACKAGE_FIND_VERSION_PATCH``
-  patch version if requested, else 0
-``PACKAGE_FIND_VERSION_TWEAK``
-  tweak version if requested, else 0
-``PACKAGE_FIND_VERSION_COUNT``
-  number of version components, 0 to 4
-
-The version file checks whether it satisfies the requested version and
-sets these variables:
-
-``PACKAGE_VERSION``
-  full provided version string
-``PACKAGE_VERSION_EXACT``
-  true if version is exact match
-``PACKAGE_VERSION_COMPATIBLE``
-  true if version is compatible
-``PACKAGE_VERSION_UNSUITABLE``
-  true if unsuitable as any version
-
-These variables are checked by the ``find_package`` command to determine
-whether the configuration file provides an acceptable version.  They
-are not available after the find_package call returns.  If the version
-is acceptable the following variables are set:
-
-``<package>_VERSION``
-  full provided version string
-``<package>_VERSION_MAJOR``
-  major version if provided, else 0
-``<package>_VERSION_MINOR``
-  minor version if provided, else 0
-``<package>_VERSION_PATCH``
-  patch version if provided, else 0
-``<package>_VERSION_TWEAK``
-  tweak version if provided, else 0
-``<package>_VERSION_COUNT``
-  number of version components, 0 to 4
-
-and the corresponding package configuration file is loaded.  When
-multiple package configuration files are available whose version files
-claim compatibility with the version requested it is unspecified which
-one is chosen.  No attempt is made to choose a highest or closest
-version number.
-
-Config mode provides an elaborate interface and search procedure.
-Much of the interface is provided for completeness and for use
-internally by find-modules loaded by Module mode.  Most user code
-should simply call::
-
-  find_package(<package> [major[.minor]] [EXACT] [REQUIRED|QUIET])
-
-in order to find a package.  Package maintainers providing CMake
-package configuration files are encouraged to name and install them
-such that the procedure outlined below will find them without
-requiring use of additional options.
-
-CMake constructs a set of possible installation prefixes for the
-package.  Under each prefix several directories are searched for a
-configuration file.  The tables below show the directories searched.
-Each entry is meant for installation trees following Windows (W), UNIX
-(U), or Apple (A) conventions::
-
-  <prefix>/                                               (W)
-  <prefix>/(cmake|CMake)/                                 (W)
-  <prefix>/<name>*/                                       (W)
-  <prefix>/<name>*/(cmake|CMake)/                         (W)
-  <prefix>/(lib/<arch>|lib|share)/cmake/<name>*/          (U)
-  <prefix>/(lib/<arch>|lib|share)/<name>*/                (U)
-  <prefix>/(lib/<arch>|lib|share)/<name>*/(cmake|CMake)/  (U)
-
-On systems supporting OS X Frameworks and Application Bundles the
-following directories are searched for frameworks or bundles
-containing a configuration file::
-
-  <prefix>/<name>.framework/Resources/                    (A)
-  <prefix>/<name>.framework/Resources/CMake/              (A)
-  <prefix>/<name>.framework/Versions/*/Resources/         (A)
-  <prefix>/<name>.framework/Versions/*/Resources/CMake/   (A)
-  <prefix>/<name>.app/Contents/Resources/                 (A)
-  <prefix>/<name>.app/Contents/Resources/CMake/           (A)
-
-In all cases the ``<name>`` is treated as case-insensitive and corresponds
-to any of the names specified (``<package>`` or names given by ``NAMES``).
-Paths with ``lib/<arch>`` are enabled if the
-:variable:`CMAKE_LIBRARY_ARCHITECTURE` variable is set.  If ``PATH_SUFFIXES``
-is specified the suffixes are appended to each (W) or (U) directory entry
-one-by-one.
-
-This set of directories is intended to work in cooperation with
-projects that provide configuration files in their installation trees.
-Directories above marked with (W) are intended for installations on
-Windows where the prefix may point at the top of an application's
-installation directory.  Those marked with (U) are intended for
-installations on UNIX platforms where the prefix is shared by multiple
-packages.  This is merely a convention, so all (W) and (U) directories
-are still searched on all platforms.  Directories marked with (A) are
-intended for installations on Apple platforms.  The cmake variables
-``CMAKE_FIND_FRAMEWORK`` and ``CMAKE_FIND_APPBUNDLE``
-determine the order of preference as specified below.
-
-The set of installation prefixes is constructed using the following
-steps.  If ``NO_DEFAULT_PATH`` is specified all ``NO_*`` options are
-enabled.
-
-1. Search paths specified in cmake-specific cache variables.  These
-   are intended to be used on the command line with a ``-DVAR=value``.
-   This can be skipped if ``NO_CMAKE_PATH`` is passed::
-
-     CMAKE_PREFIX_PATH
-     CMAKE_FRAMEWORK_PATH
-     CMAKE_APPBUNDLE_PATH
-
-2. Search paths specified in cmake-specific environment variables.
-   These are intended to be set in the user's shell configuration.
-   This can be skipped if ``NO_CMAKE_ENVIRONMENT_PATH`` is passed::
-
-     <package>_DIR
-     CMAKE_PREFIX_PATH
-     CMAKE_FRAMEWORK_PATH
-     CMAKE_APPBUNDLE_PATH
-
-3. Search paths specified by the ``HINTS`` option.  These should be paths
-   computed by system introspection, such as a hint provided by the
-   location of another item already found.  Hard-coded guesses should
-   be specified with the ``PATHS`` option.
-
-4. Search the standard system environment variables.  This can be
-   skipped if ``NO_SYSTEM_ENVIRONMENT_PATH`` is passed.  Path entries
-   ending in ``/bin`` or ``/sbin`` are automatically converted to their
-   parent directories::
-
-     PATH
-
-5. Search project build trees recently configured in a :manual:`cmake-gui(1)`.
-   This can be skipped if ``NO_CMAKE_BUILDS_PATH`` is passed.  It is intended
-   for the case when a user is building multiple dependent projects one
-   after another.
-   (This step is implemented only on Windows.)
-
-6. Search paths stored in the CMake :ref:`User Package Registry`.
-   This can be skipped if ``NO_CMAKE_PACKAGE_REGISTRY`` is passed or by
-   setting the :variable:`CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY`
-   to ``TRUE``.
-   See the :manual:`cmake-packages(7)` manual for details on the user
-   package registry.
-
-7. Search cmake variables defined in the Platform files for the
-   current system.  This can be skipped if ``NO_CMAKE_SYSTEM_PATH`` is
-   passed::
-
-     CMAKE_SYSTEM_PREFIX_PATH
-     CMAKE_SYSTEM_FRAMEWORK_PATH
-     CMAKE_SYSTEM_APPBUNDLE_PATH
-
-8. Search paths stored in the CMake :ref:`System Package Registry`.
-   This can be skipped if ``NO_CMAKE_SYSTEM_PACKAGE_REGISTRY`` is passed
-   or by setting the
-   :variable:`CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY` to ``TRUE``.
-   See the :manual:`cmake-packages(7)` manual for details on the system
-   package registry.
-
-9. Search paths specified by the ``PATHS`` option.  These are typically
-   hard-coded guesses.
-
-.. |FIND_XXX| replace:: find_package
-.. |FIND_ARGS_XXX| replace:: <package>
-.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
-   :variable:`CMAKE_FIND_ROOT_PATH_MODE_PACKAGE`
-
-.. include:: FIND_XXX_MAC.txt
-.. include:: FIND_XXX_ROOT.txt
-.. include:: FIND_XXX_ORDER.txt
-
-Every non-REQUIRED ``find_package`` call can be disabled by setting the
-:variable:`CMAKE_DISABLE_FIND_PACKAGE_<PackageName>` variable to ``TRUE``.
-
-When loading a find module or package configuration file ``find_package``
-defines variables to provide information about the call arguments (and
-restores their original state before returning):
-
-``CMAKE_FIND_PACKAGE_NAME``
-  the ``<package>`` name which is searched for
-``<package>_FIND_REQUIRED``
-  true if ``REQUIRED`` option was given
-``<package>_FIND_QUIETLY``
-  true if ``QUIET`` option was given
-``<package>_FIND_VERSION``
-  full requested version string
-``<package>_FIND_VERSION_MAJOR``
-  major version if requested, else 0
-``<package>_FIND_VERSION_MINOR``
-  minor version if requested, else 0
-``<package>_FIND_VERSION_PATCH``
-  patch version if requested, else 0
-``<package>_FIND_VERSION_TWEAK``
-  tweak version if requested, else 0
-``<package>_FIND_VERSION_COUNT``
-  number of version components, 0 to 4
-``<package>_FIND_VERSION_EXACT``
-  true if ``EXACT`` option was given
-``<package>_FIND_COMPONENTS``
-  list of requested components
-``<package>_FIND_REQUIRED_<c>``
-  true if component ``<c>`` is required,
-  false if component ``<c>`` is optional
-
-In Module mode the loaded find module is responsible to honor the
-request detailed by these variables; see the find module for details.
-In Config mode ``find_package`` handles ``REQUIRED``, ``QUIET``, and
-``[version]`` options automatically but leaves it to the package
-configuration file to handle components in a way that makes sense
-for the package.  The package configuration file may set
-``<package>_FOUND`` to false to tell ``find_package`` that component
-requirements are not satisfied.
-
-See the :command:`cmake_policy` command documentation for discussion
-of the ``NO_POLICY_SCOPE`` option.
diff --git a/share/cmake-3.2/Help/command/find_path.rst b/share/cmake-3.2/Help/command/find_path.rst
deleted file mode 100644
index 95d49e7..0000000
--- a/share/cmake-3.2/Help/command/find_path.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-find_path
----------
-
-.. |FIND_XXX| replace:: find_path
-.. |NAMES| replace:: NAMES name1 [name2 ...]
-.. |SEARCH_XXX| replace:: file in a directory
-.. |SEARCH_XXX_DESC| replace:: directory containing the named file
-.. |XXX_SUBDIR| replace:: include
-
-.. |CMAKE_PREFIX_PATH_XXX| replace::
-   <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
-   |CMAKE_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_XXX_PATH| replace:: CMAKE_INCLUDE_PATH
-.. |CMAKE_XXX_MAC_PATH| replace:: CMAKE_FRAMEWORK_PATH
-
-.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: PATH and INCLUDE
-
-.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
-   <prefix>/include/<arch> if CMAKE_LIBRARY_ARCHITECTURE is set, and
-   |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_SYSTEM_XXX_PATH| replace:: CMAKE_SYSTEM_INCLUDE_PATH
-.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace:: CMAKE_SYSTEM_FRAMEWORK_PATH
-
-.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
-   :variable:`CMAKE_FIND_ROOT_PATH_MODE_INCLUDE`
-
-.. include:: FIND_XXX.txt
-
-When searching for frameworks, if the file is specified as A/b.h, then
-the framework search will look for A.framework/Headers/b.h.  If that
-is found the path will be set to the path to the framework.  CMake
-will convert this to the correct -F option to include the file.
diff --git a/share/cmake-3.2/Help/command/find_program.rst b/share/cmake-3.2/Help/command/find_program.rst
deleted file mode 100644
index c62a8a5..0000000
--- a/share/cmake-3.2/Help/command/find_program.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-find_program
-------------
-
-.. |FIND_XXX| replace:: find_program
-.. |NAMES| replace:: NAMES name1 [name2 ...]
-.. |SEARCH_XXX| replace:: program
-.. |SEARCH_XXX_DESC| replace:: program
-.. |XXX_SUBDIR| replace:: [s]bin
-
-.. |CMAKE_PREFIX_PATH_XXX| replace::
-   |CMAKE_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_XXX_PATH| replace:: CMAKE_PROGRAM_PATH
-.. |CMAKE_XXX_MAC_PATH| replace:: CMAKE_APPBUNDLE_PATH
-
-.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: PATH
-
-.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
-   |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
-.. |CMAKE_SYSTEM_XXX_PATH| replace:: CMAKE_SYSTEM_PROGRAM_PATH
-.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace:: CMAKE_SYSTEM_APPBUNDLE_PATH
-
-.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
-   :variable:`CMAKE_FIND_ROOT_PATH_MODE_PROGRAM`
-
-.. include:: FIND_XXX.txt
diff --git a/share/cmake-3.2/Help/command/fltk_wrap_ui.rst b/share/cmake-3.2/Help/command/fltk_wrap_ui.rst
deleted file mode 100644
index 448ae64..0000000
--- a/share/cmake-3.2/Help/command/fltk_wrap_ui.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-fltk_wrap_ui
-------------
-
-Create FLTK user interfaces Wrappers.
-
-::
-
-  fltk_wrap_ui(resultingLibraryName source1
-               source2 ... sourceN )
-
-Produce .h and .cxx files for all the .fl and .fld files listed.  The
-resulting .h and .cxx files will be added to a variable named
-resultingLibraryName_FLTK_UI_SRCS which should be added to your
-library.
diff --git a/share/cmake-3.2/Help/command/foreach.rst b/share/cmake-3.2/Help/command/foreach.rst
deleted file mode 100644
index 348ebd8..0000000
--- a/share/cmake-3.2/Help/command/foreach.rst
+++ /dev/null
@@ -1,47 +0,0 @@
-foreach
--------
-
-Evaluate a group of commands for each value in a list.
-
-::
-
-  foreach(loop_var arg1 arg2 ...)
-    COMMAND1(ARGS ...)
-    COMMAND2(ARGS ...)
-    ...
-  endforeach(loop_var)
-
-All commands between foreach and the matching endforeach are recorded
-without being invoked.  Once the endforeach is evaluated, the recorded
-list of commands is invoked once for each argument listed in the
-original foreach command.  Before each iteration of the loop
-"${loop_var}" will be set as a variable with the current value in the
-list.
-
-::
-
-  foreach(loop_var RANGE total)
-  foreach(loop_var RANGE start stop [step])
-
-Foreach can also iterate over a generated range of numbers.  There are
-three types of this iteration:
-
-* When specifying single number, the range will have elements 0 to
-  "total".
-
-* When specifying two numbers, the range will have elements from the
-  first number to the second number.
-
-* The third optional number is the increment used to iterate from the
-  first number to the second number.
-
-::
-
-  foreach(loop_var IN [LISTS [list1 [...]]]
-                      [ITEMS [item1 [...]]])
-
-Iterates over a precise list of items.  The LISTS option names
-list-valued variables to be traversed, including empty elements (an
-empty string is a zero-length list).  (Note macro
-arguments are not variables.)  The ITEMS option ends argument
-parsing and includes all arguments following it in the iteration.
diff --git a/share/cmake-3.2/Help/command/function.rst b/share/cmake-3.2/Help/command/function.rst
deleted file mode 100644
index b18e03c..0000000
--- a/share/cmake-3.2/Help/command/function.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-function
---------
-
-Start recording a function for later invocation as a command.
-
-::
-
-  function(<name> [arg1 [arg2 [arg3 ...]]])
-    COMMAND1(ARGS ...)
-    COMMAND2(ARGS ...)
-    ...
-  endfunction(<name>)
-
-Define a function named <name> that takes arguments named arg1 arg2
-arg3 (...).  Commands listed after function, but before the matching
-endfunction, are not invoked until the function is invoked.  When it
-is invoked, the commands recorded in the function are first modified
-by replacing formal parameters (${arg1}) with the arguments passed,
-and then invoked as normal commands.  In addition to referencing the
-formal parameters you can reference the variable ARGC which will be
-set to the number of arguments passed into the function as well as
-ARGV0 ARGV1 ARGV2 ...  which will have the actual values of the
-arguments passed in.  This facilitates creating functions with
-optional arguments.  Additionally ARGV holds the list of all arguments
-given to the function and ARGN holds the list of arguments past the
-last expected argument.
-
-A function opens a new scope: see set(var PARENT_SCOPE) for details.
-
-See the cmake_policy() command documentation for the behavior of
-policies inside functions.
diff --git a/share/cmake-3.2/Help/command/get_cmake_property.rst b/share/cmake-3.2/Help/command/get_cmake_property.rst
deleted file mode 100644
index bcfc5e8..0000000
--- a/share/cmake-3.2/Help/command/get_cmake_property.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-get_cmake_property
-------------------
-
-Get a property of the CMake instance.
-
-::
-
-  get_cmake_property(VAR property)
-
-Get a property from the CMake instance.  The value of the property is
-stored in the variable VAR.  If the property is not found, VAR will be
-set to "NOTFOUND".  Some supported properties include: VARIABLES,
-CACHE_VARIABLES, COMMANDS, MACROS, and COMPONENTS.
-
-See also the more general get_property() command.
diff --git a/share/cmake-3.2/Help/command/get_directory_property.rst b/share/cmake-3.2/Help/command/get_directory_property.rst
deleted file mode 100644
index f2a0a80..0000000
--- a/share/cmake-3.2/Help/command/get_directory_property.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-get_directory_property
-----------------------
-
-Get a property of DIRECTORY scope.
-
-::
-
-  get_directory_property(<variable> [DIRECTORY <dir>] <prop-name>)
-
-Store a property of directory scope in the named variable.  If the
-property is not defined the empty-string is returned.  The DIRECTORY
-argument specifies another directory from which to retrieve the
-property value.  The specified directory must have already been
-traversed by CMake.
-
-::
-
-  get_directory_property(<variable> [DIRECTORY <dir>]
-                         DEFINITION <var-name>)
-
-Get a variable definition from a directory.  This form is useful to
-get a variable definition from another directory.
-
-See also the more general get_property() command.
diff --git a/share/cmake-3.2/Help/command/get_filename_component.rst b/share/cmake-3.2/Help/command/get_filename_component.rst
deleted file mode 100644
index 5eec792..0000000
--- a/share/cmake-3.2/Help/command/get_filename_component.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-get_filename_component
-----------------------
-
-Get a specific component of a full filename.
-
-::
-
-  get_filename_component(<VAR> <FileName> <COMP> [CACHE])
-
-Set <VAR> to a component of <FileName>, where <COMP> is one of:
-
-::
-
- DIRECTORY = Directory without file name
- NAME      = File name without directory
- EXT       = File name longest extension (.b.c from d/a.b.c)
- NAME_WE   = File name without directory or longest extension
- ABSOLUTE  = Full path to file
- REALPATH  = Full path to existing file with symlinks resolved
- PATH      = Legacy alias for DIRECTORY (use for CMake <= 2.8.11)
-
-Paths are returned with forward slashes and have no trailing slahes.
-The longest file extension is always considered.  If the optional
-CACHE argument is specified, the result variable is added to the
-cache.
-
-::
-
-  get_filename_component(<VAR> FileName
-                         PROGRAM [PROGRAM_ARGS <ARG_VAR>]
-                         [CACHE])
-
-The program in FileName will be found in the system search path or
-left as a full path.  If PROGRAM_ARGS is present with PROGRAM, then
-any command-line arguments present in the FileName string are split
-from the program name and stored in <ARG_VAR>.  This is used to
-separate a program name from its arguments in a command line string.
diff --git a/share/cmake-3.2/Help/command/get_source_file_property.rst b/share/cmake-3.2/Help/command/get_source_file_property.rst
deleted file mode 100644
index 80c512b..0000000
--- a/share/cmake-3.2/Help/command/get_source_file_property.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-get_source_file_property
-------------------------
-
-Get a property for a source file.
-
-::
-
-  get_source_file_property(VAR file property)
-
-Get a property from a source file.  The value of the property is
-stored in the variable VAR.  If the property is not found, VAR will be
-set to "NOTFOUND".  Use set_source_files_properties to set property
-values.  Source file properties usually control how the file is built.
-One property that is always there is LOCATION
-
-See also the more general get_property() command.
diff --git a/share/cmake-3.2/Help/command/get_target_property.rst b/share/cmake-3.2/Help/command/get_target_property.rst
deleted file mode 100644
index 4017d31..0000000
--- a/share/cmake-3.2/Help/command/get_target_property.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-get_target_property
--------------------
-
-Get a property from a target.
-
-::
-
-  get_target_property(VAR target property)
-
-Get a property from a target.  The value of the property is stored in
-the variable VAR.  If the property is not found, VAR will be set to
-"NOTFOUND".  Use set_target_properties to set property values.
-Properties are usually used to control how a target is built, but some
-query the target instead.  This command can get properties for any
-target so far created.  The targets do not need to be in the current
-CMakeLists.txt file.
-
-See also the more general get_property() command.
diff --git a/share/cmake-3.2/Help/command/get_test_property.rst b/share/cmake-3.2/Help/command/get_test_property.rst
deleted file mode 100644
index 391a32e..0000000
--- a/share/cmake-3.2/Help/command/get_test_property.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-get_test_property
------------------
-
-Get a property of the test.
-
-::
-
-  get_test_property(test property VAR)
-
-Get a property from the test.  The value of the property is stored in
-the variable VAR.  If the test or property is not found, VAR will be
-set to "NOTFOUND".  For a list of standard properties you can type cmake
---help-property-list.
-
-See also the more general get_property() command.
diff --git a/share/cmake-3.2/Help/command/if.rst b/share/cmake-3.2/Help/command/if.rst
deleted file mode 100644
index d50b14c..0000000
--- a/share/cmake-3.2/Help/command/if.rst
+++ /dev/null
@@ -1,208 +0,0 @@
-if
---
-
-Conditionally execute a group of commands.
-
-.. code-block:: cmake
-
- if(expression)
-   # then section.
-   COMMAND1(ARGS ...)
-   COMMAND2(ARGS ...)
-   ...
- elseif(expression2)
-   # elseif section.
-   COMMAND1(ARGS ...)
-   COMMAND2(ARGS ...)
-   ...
- else(expression)
-   # else section.
-   COMMAND1(ARGS ...)
-   COMMAND2(ARGS ...)
-   ...
- endif(expression)
-
-Evaluates the given expression.  If the result is true, the commands
-in the THEN section are invoked.  Otherwise, the commands in the else
-section are invoked.  The elseif and else sections are optional.  You
-may have multiple elseif clauses.  Note that the expression in the
-else and endif clause is optional.  Long expressions can be used and
-there is a traditional order of precedence.  Parenthetical expressions
-are evaluated first followed by unary tests such as ``EXISTS``,
-``COMMAND``, and ``DEFINED``.  Then any binary tests such as
-``EQUAL``, ``LESS``, ``GREATER``, ``STRLESS``, ``STRGREATER``,
-``STREQUAL``, and ``MATCHES`` will be evaluated.  Then boolean ``NOT``
-operators and finally boolean ``AND`` and then ``OR`` operators will
-be evaluated.
-
-Possible expressions are:
-
-``if(<constant>)``
- True if the constant is ``1``, ``ON``, ``YES``, ``TRUE``, ``Y``,
- or a non-zero number.  False if the constant is ``0``, ``OFF``,
- ``NO``, ``FALSE``, ``N``, ``IGNORE``, ``NOTFOUND``, the empty string,
- or ends in the suffix ``-NOTFOUND``.  Named boolean constants are
- case-insensitive.  If the argument is not one of these specific
- constants, it is treated as a variable or string and the following
- signature is used.
-
-``if(<variable|string>)``
- True if given a variable that is defined to a value that is not a false
- constant.  False otherwise.  (Note macro arguments are not variables.)
-
-``if(NOT <expression>)``
- True if the expression is not true.
-
-``if(<expr1> AND <expr2>)``
- True if both expressions would be considered true individually.
-
-``if(<expr1> OR <expr2>)``
- True if either expression would be considered true individually.
-
-``if(COMMAND command-name)``
- True if the given name is a command, macro or function that can be
- invoked.
-
-``if(POLICY policy-id)``
- True if the given name is an existing policy (of the form ``CMP<NNNN>``).
-
-``if(TARGET target-name)``
- True if the given name is an existing logical target name such as those
- created by the :command:`add_executable`, :command:`add_library`, or
- :command:`add_custom_target` commands.
-
-``if(EXISTS path-to-file-or-directory)``
- True if the named file or directory exists.  Behavior is well-defined
- only for full paths.
-
-``if(file1 IS_NEWER_THAN file2)``
- True if file1 is newer than file2 or if one of the two files doesn't
- exist.  Behavior is well-defined only for full paths.  If the file
- time stamps are exactly the same, an ``IS_NEWER_THAN`` comparison returns
- true, so that any dependent build operations will occur in the event
- of a tie.  This includes the case of passing the same file name for
- both file1 and file2.
-
-``if(IS_DIRECTORY path-to-directory)``
- True if the given name is a directory.  Behavior is well-defined only
- for full paths.
-
-``if(IS_SYMLINK file-name)``
- True if the given name is a symbolic link.  Behavior is well-defined
- only for full paths.
-
-``if(IS_ABSOLUTE path)``
- True if the given path is an absolute path.
-
-``if(<variable|string> MATCHES regex)``
- True if the given string or variable's value matches the given regular
- expression.
-
-``if(<variable|string> LESS <variable|string>)``
- True if the given string or variable's value is a valid number and less
- than that on the right.
-
-``if(<variable|string> GREATER <variable|string>)``
- True if the given string or variable's value is a valid number and greater
- than that on the right.
-
-``if(<variable|string> EQUAL <variable|string>)``
- True if the given string or variable's value is a valid number and equal
- to that on the right.
-
-``if(<variable|string> STRLESS <variable|string>)``
- True if the given string or variable's value is lexicographically less
- than the string or variable on the right.
-
-``if(<variable|string> STRGREATER <variable|string>)``
- True if the given string or variable's value is lexicographically greater
- than the string or variable on the right.
-
-``if(<variable|string> STREQUAL <variable|string>)``
- True if the given string or variable's value is lexicographically equal
- to the string or variable on the right.
-
-``if(<variable|string> VERSION_LESS <variable|string>)``
- Component-wise integer version number comparison (version format is
- ``major[.minor[.patch[.tweak]]]``).
-
-``if(<variable|string> VERSION_EQUAL <variable|string>)``
- Component-wise integer version number comparison (version format is
- ``major[.minor[.patch[.tweak]]]``).
-
-``if(<variable|string> VERSION_GREATER <variable|string>)``
- Component-wise integer version number comparison (version format is
- ``major[.minor[.patch[.tweak]]]``).
-
-``if(DEFINED <variable>)``
- True if the given variable is defined.  It does not matter if the
- variable is true or false just if it has been set.  (Note macro
- arguments are not variables.)
-
-``if((expression) AND (expression OR (expression)))``
- The expressions inside the parenthesis are evaluated first and then
- the remaining expression is evaluated as in the previous examples.
- Where there are nested parenthesis the innermost are evaluated as part
- of evaluating the expression that contains them.
-
-The if command was written very early in CMake's history, predating
-the ``${}`` variable evaluation syntax, and for convenience evaluates
-variables named by its arguments as shown in the above signatures.
-Note that normal variable evaluation with ``${}`` applies before the if
-command even receives the arguments.  Therefore code like::
-
- set(var1 OFF)
- set(var2 "var1")
- if(${var2})
-
-appears to the if command as::
-
- if(var1)
-
-and is evaluated according to the ``if(<variable>)`` case documented
-above.  The result is ``OFF`` which is false.  However, if we remove the
-``${}`` from the example then the command sees::
-
- if(var2)
-
-which is true because ``var2`` is defined to "var1" which is not a false
-constant.
-
-Automatic evaluation applies in the other cases whenever the
-above-documented signature accepts ``<variable|string>``:
-
-* The left hand argument to ``MATCHES`` is first checked to see if it is
-  a defined variable, if so the variable's value is used, otherwise the
-  original value is used.
-
-* If the left hand argument to ``MATCHES`` is missing it returns false
-  without error
-
-* Both left and right hand arguments to ``LESS``, ``GREATER``, and
-  ``EQUAL`` are independently tested to see if they are defined
-  variables, if so their defined values are used otherwise the original
-  value is used.
-
-* Both left and right hand arguments to ``STRLESS``, ``STREQUAL``, and
-  ``STRGREATER`` are independently tested to see if they are defined
-  variables, if so their defined values are used otherwise the original
-  value is used.
-
-* Both left and right hand arguments to ``VERSION_LESS``,
-  ``VERSION_EQUAL``, and ``VERSION_GREATER`` are independently tested
-  to see if they are defined variables, if so their defined values are
-  used otherwise the original value is used.
-
-* The right hand argument to ``NOT`` is tested to see if it is a boolean
-  constant, if so the value is used, otherwise it is assumed to be a
-  variable and it is dereferenced.
-
-* The left and right hand arguments to ``AND`` and ``OR`` are independently
-  tested to see if they are boolean constants, if so they are used as
-  such, otherwise they are assumed to be variables and are dereferenced.
-
-To prevent ambiguity, potential variable or keyword names can be
-specified in a :ref:`Quoted Argument` or a :ref:`Bracket Argument`.
-A quoted or bracketed variable or keyword will be interpreted as a
-string and not dereferenced or interpreted.
-See policy :policy:`CMP0054`.
diff --git a/share/cmake-3.2/Help/command/include.rst b/share/cmake-3.2/Help/command/include.rst
deleted file mode 100644
index a9074c1..0000000
--- a/share/cmake-3.2/Help/command/include.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-include
--------
-
-Load and run CMake code from a file or module.
-
-::
-
-  include(<file|module> [OPTIONAL] [RESULT_VARIABLE <VAR>]
-                        [NO_POLICY_SCOPE])
-
-Load and run CMake code from the file given.  Variable reads and
-writes access the scope of the caller (dynamic scoping).  If OPTIONAL
-is present, then no error is raised if the file does not exist.  If
-RESULT_VARIABLE is given the variable will be set to the full filename
-which has been included or NOTFOUND if it failed.
-
-If a module is specified instead of a file, the file with name
-<modulename>.cmake is searched first in CMAKE_MODULE_PATH, then in the
-CMake module directory.  There is one exception to this: if the file
-which calls include() is located itself in the CMake module directory,
-then first the CMake module directory is searched and
-CMAKE_MODULE_PATH afterwards.  See also policy CMP0017.
-
-See the cmake_policy() command documentation for discussion of the
-NO_POLICY_SCOPE option.
diff --git a/share/cmake-3.2/Help/command/include_external_msproject.rst b/share/cmake-3.2/Help/command/include_external_msproject.rst
deleted file mode 100644
index ba9a393..0000000
--- a/share/cmake-3.2/Help/command/include_external_msproject.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-include_external_msproject
---------------------------
-
-Include an external Microsoft project file in a workspace.
-
-::
-
-  include_external_msproject(projectname location
-                             [TYPE projectTypeGUID]
-                             [GUID projectGUID]
-                             [PLATFORM platformName]
-                             dep1 dep2 ...)
-
-Includes an external Microsoft project in the generated workspace
-file.  Currently does nothing on UNIX.  This will create a target
-named [projectname].  This can be used in the add_dependencies command
-to make things depend on the external project.
-
-TYPE, GUID and PLATFORM are optional parameters that allow one to
-specify the type of project, id (GUID) of the project and the name of
-the target platform.  This is useful for projects requiring values
-other than the default (e.g.  WIX projects).  These options are not
-supported by the Visual Studio 6 generator.
diff --git a/share/cmake-3.2/Help/command/include_regular_expression.rst b/share/cmake-3.2/Help/command/include_regular_expression.rst
deleted file mode 100644
index dd887df..0000000
--- a/share/cmake-3.2/Help/command/include_regular_expression.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-include_regular_expression
---------------------------
-
-Set the regular expression used for dependency checking.
-
-::
-
-  include_regular_expression(regex_match [regex_complain])
-
-Set the regular expressions used in dependency checking.  Only files
-matching regex_match will be traced as dependencies.  Only files
-matching regex_complain will generate warnings if they cannot be found
-(standard header paths are not searched).  The defaults are:
-
-::
-
-  regex_match    = "^.*$" (match everything)
-  regex_complain = "^$" (match empty string only)
diff --git a/share/cmake-3.2/Help/command/install.rst b/share/cmake-3.2/Help/command/install.rst
deleted file mode 100644
index 5dd5aaa..0000000
--- a/share/cmake-3.2/Help/command/install.rst
+++ /dev/null
@@ -1,342 +0,0 @@
-install
--------
-
-.. only:: html
-
-   .. contents::
-
-Specify rules to run at install time.
-
-Introduction
-^^^^^^^^^^^^
-
-This command generates installation rules for a project.  Rules
-specified by calls to this command within a source directory are
-executed in order during installation.  The order across directories
-is not defined.
-
-There are multiple signatures for this command.  Some of them define
-installation options for files and targets.  Options common to
-multiple signatures are covered here but they are valid only for
-signatures that specify them.  The common options are:
-
-``DESTINATION``
-  Specify the directory on disk to which a file will be installed.
-  If a full path (with a leading slash or drive letter) is given
-  it is used directly.  If a relative path is given it is interpreted
-  relative to the value of the :variable:`CMAKE_INSTALL_PREFIX` variable.
-  The prefix can be relocated at install time using the ``DESTDIR``
-  mechanism explained in the :variable:`CMAKE_INSTALL_PREFIX` variable
-  documentation.
-
-``PERMISSIONS``
-  Specify permissions for installed files.  Valid permissions are
-  ``OWNER_READ``, ``OWNER_WRITE``, ``OWNER_EXECUTE``, ``GROUP_READ``,
-  ``GROUP_WRITE``, ``GROUP_EXECUTE``, ``WORLD_READ``, ``WORLD_WRITE``,
-  ``WORLD_EXECUTE``, ``SETUID``, and ``SETGID``.  Permissions that do
-  not make sense on certain platforms are ignored on those platforms.
-
-``CONFIGURATIONS``
-  Specify a list of build configurations for which the install rule
-  applies (Debug, Release, etc.).
-
-``COMPONENT``
-  Specify an installation component name with which the install rule
-  is associated, such as "runtime" or "development".  During
-  component-specific installation only install rules associated with
-  the given component name will be executed.  During a full installation
-  all components are installed.  If ``COMPONENT`` is not provided a
-  default component "Unspecified" is created.  The default component
-  name may be controlled with the
-  :variable:`CMAKE_INSTALL_DEFAULT_COMPONENT_NAME` variable.
-
-``RENAME``
-  Specify a name for an installed file that may be different from the
-  original file.  Renaming is allowed only when a single file is
-  installed by the command.
-
-``OPTIONAL``
-  Specify that it is not an error if the file to be installed does
-  not exist.
-
-Command signatures that install files may print messages during
-installation.  Use the :variable:`CMAKE_INSTALL_MESSAGE` variable
-to control which messages are printed.
-
-Installing Targets
-^^^^^^^^^^^^^^^^^^
-
-::
-
-  install(TARGETS targets... [EXPORT <export-name>]
-          [[ARCHIVE|LIBRARY|RUNTIME|FRAMEWORK|BUNDLE|
-            PRIVATE_HEADER|PUBLIC_HEADER|RESOURCE]
-           [DESTINATION <dir>]
-           [INCLUDES DESTINATION [<dir> ...]]
-           [PERMISSIONS permissions...]
-           [CONFIGURATIONS [Debug|Release|...]]
-           [COMPONENT <component>]
-           [OPTIONAL] [NAMELINK_ONLY|NAMELINK_SKIP]
-          ] [...])
-
-The ``TARGETS`` form specifies rules for installing targets from a
-project.  There are five kinds of target files that may be installed:
-``ARCHIVE``, ``LIBRARY``, ``RUNTIME``, ``FRAMEWORK``, and ``BUNDLE``.
-Executables are treated as ``RUNTIME`` targets, except that those
-marked with the ``MACOSX_BUNDLE`` property are treated as ``BUNDLE``
-targets on OS X.  Static libraries are always treated as ``ARCHIVE``
-targets.  Module libraries are always treated as ``LIBRARY`` targets.
-For non-DLL platforms shared libraries are treated as ``LIBRARY``
-targets, except that those marked with the ``FRAMEWORK`` property are
-treated as ``FRAMEWORK`` targets on OS X.  For DLL platforms the DLL
-part of a shared library is treated as a ``RUNTIME`` target and the
-corresponding import library is treated as an ``ARCHIVE`` target.
-All Windows-based systems including Cygwin are DLL platforms.
-The ``ARCHIVE``, ``LIBRARY``, ``RUNTIME``, and ``FRAMEWORK`` arguments
-change the type of target to which the subsequent properties apply.
-If none is given the installation properties apply to all target
-types.  If only one is given then only targets of that type will be
-installed (which can be used to install just a DLL or just an import
-library).  The ``INCLUDES DESTINATION`` specifies a list of directories
-which will be added to the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`
-target property of the ``<targets>`` when exported by the
-:command:`install(EXPORT)` command.  If a relative path is
-specified, it is treated as relative to the ``$<INSTALL_PREFIX>``.
-
-The ``PRIVATE_HEADER``, ``PUBLIC_HEADER``, and ``RESOURCE`` arguments
-cause subsequent properties to be applied to installing a ``FRAMEWORK``
-shared library target's associated files on non-Apple platforms.  Rules
-defined by these arguments are ignored on Apple platforms because the
-associated files are installed into the appropriate locations inside
-the framework folder.  See documentation of the
-:prop_tgt:`PRIVATE_HEADER`, :prop_tgt:`PUBLIC_HEADER`, and
-:prop_tgt:`RESOURCE` target properties for details.
-
-Either ``NAMELINK_ONLY`` or ``NAMELINK_SKIP`` may be specified as a
-``LIBRARY`` option.  On some platforms a versioned shared library
-has a symbolic link such as::
-
-  lib<name>.so -> lib<name>.so.1
-
-where ``lib<name>.so.1`` is the soname of the library and ``lib<name>.so``
-is a "namelink" allowing linkers to find the library when given
-``-l<name>``.  The ``NAMELINK_ONLY`` option causes installation of only the
-namelink when a library target is installed.  The ``NAMELINK_SKIP`` option
-causes installation of library files other than the namelink when a
-library target is installed.  When neither option is given both
-portions are installed.  On platforms where versioned shared libraries
-do not have namelinks or when a library is not versioned the
-``NAMELINK_SKIP`` option installs the library and the ``NAMELINK_ONLY``
-option installs nothing.  See the :prop_tgt:`VERSION` and
-:prop_tgt:`SOVERSION` target properties for details on creating versioned
-shared libraries.
-
-One or more groups of properties may be specified in a single call to
-the ``TARGETS`` form of this command.  A target may be installed more than
-once to different locations.  Consider hypothetical targets ``myExe``,
-``mySharedLib``, and ``myStaticLib``.  The code:
-
-.. code-block:: cmake
-
-  install(TARGETS myExe mySharedLib myStaticLib
-          RUNTIME DESTINATION bin
-          LIBRARY DESTINATION lib
-          ARCHIVE DESTINATION lib/static)
-  install(TARGETS mySharedLib DESTINATION /some/full/path)
-
-will install ``myExe`` to ``<prefix>/bin`` and ``myStaticLib`` to
-``<prefix>/lib/static``.  On non-DLL platforms ``mySharedLib`` will be
-installed to ``<prefix>/lib`` and ``/some/full/path``.  On DLL platforms
-the ``mySharedLib`` DLL will be installed to ``<prefix>/bin`` and
-``/some/full/path`` and its import library will be installed to
-``<prefix>/lib/static`` and ``/some/full/path``.
-
-The ``EXPORT`` option associates the installed target files with an
-export called ``<export-name>``.  It must appear before any ``RUNTIME``,
-``LIBRARY``, or ``ARCHIVE`` options.  To actually install the export
-file itself, call ``install(EXPORT)``, documented below.
-
-Installing a target with the :prop_tgt:`EXCLUDE_FROM_ALL` target property
-set to ``TRUE`` has undefined behavior.
-
-Installing Files
-^^^^^^^^^^^^^^^^
-
-::
-
-  install(<FILES|PROGRAMS> files... DESTINATION <dir>
-          [PERMISSIONS permissions...]
-          [CONFIGURATIONS [Debug|Release|...]]
-          [COMPONENT <component>]
-          [RENAME <name>] [OPTIONAL])
-
-The ``FILES`` form specifies rules for installing files for a project.
-File names given as relative paths are interpreted with respect to the
-current source directory.  Files installed by this form are by default
-given permissions ``OWNER_WRITE``, ``OWNER_READ``, ``GROUP_READ``, and
-``WORLD_READ`` if no ``PERMISSIONS`` argument is given.
-
-The ``PROGRAMS`` form is identical to the ``FILES`` form except that the
-default permissions for the installed file also include ``OWNER_EXECUTE``,
-``GROUP_EXECUTE``, and ``WORLD_EXECUTE``.  This form is intended to install
-programs that are not targets, such as shell scripts.  Use the ``TARGETS``
-form to install targets built within the project.
-
-The list of ``files...`` given to ``FILES`` or ``PROGRAMS`` may use
-"generator expressions" with the syntax ``$<...>``.  See the
-:manual:`cmake-generator-expressions(7)` manual for available expressions.
-However, if any item begins in a generator expression it must evaluate
-to a full path.
-
-Installing Directories
-^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  install(DIRECTORY dirs... DESTINATION <dir>
-          [FILE_PERMISSIONS permissions...]
-          [DIRECTORY_PERMISSIONS permissions...]
-          [USE_SOURCE_PERMISSIONS] [OPTIONAL] [MESSAGE_NEVER]
-          [CONFIGURATIONS [Debug|Release|...]]
-          [COMPONENT <component>] [FILES_MATCHING]
-          [[PATTERN <pattern> | REGEX <regex>]
-           [EXCLUDE] [PERMISSIONS permissions...]] [...])
-
-The ``DIRECTORY`` form installs contents of one or more directories to a
-given destination.  The directory structure is copied verbatim to the
-destination.  The last component of each directory name is appended to
-the destination directory but a trailing slash may be used to avoid
-this because it leaves the last component empty.  Directory names
-given as relative paths are interpreted with respect to the current
-source directory.  If no input directory names are given the
-destination directory will be created but nothing will be installed
-into it.  The ``FILE_PERMISSIONS`` and ``DIRECTORY_PERMISSIONS`` options
-specify permissions given to files and directories in the destination.
-If ``USE_SOURCE_PERMISSIONS`` is specified and ``FILE_PERMISSIONS`` is not,
-file permissions will be copied from the source directory structure.
-If no permissions are specified files will be given the default
-permissions specified in the ``FILES`` form of the command, and the
-directories will be given the default permissions specified in the
-``PROGRAMS`` form of the command.
-
-The ``MESSAGE_NEVER`` option disables file installation status output.
-
-Installation of directories may be controlled with fine granularity
-using the ``PATTERN`` or ``REGEX`` options.  These "match" options specify a
-globbing pattern or regular expression to match directories or files
-encountered within input directories.  They may be used to apply
-certain options (see below) to a subset of the files and directories
-encountered.  The full path to each input file or directory (with
-forward slashes) is matched against the expression.  A ``PATTERN`` will
-match only complete file names: the portion of the full path matching
-the pattern must occur at the end of the file name and be preceded by
-a slash.  A ``REGEX`` will match any portion of the full path but it may
-use ``/`` and ``$`` to simulate the ``PATTERN`` behavior.  By default all
-files and directories are installed whether or not they are matched.
-The ``FILES_MATCHING`` option may be given before the first match option
-to disable installation of files (but not directories) not matched by
-any expression.  For example, the code
-
-.. code-block:: cmake
-
-  install(DIRECTORY src/ DESTINATION include/myproj
-          FILES_MATCHING PATTERN "*.h")
-
-will extract and install header files from a source tree.
-
-Some options may follow a ``PATTERN`` or ``REGEX`` expression and are applied
-only to files or directories matching them.  The ``EXCLUDE`` option will
-skip the matched file or directory.  The ``PERMISSIONS`` option overrides
-the permissions setting for the matched file or directory.  For
-example the code
-
-.. code-block:: cmake
-
-  install(DIRECTORY icons scripts/ DESTINATION share/myproj
-          PATTERN "CVS" EXCLUDE
-          PATTERN "scripts/*"
-          PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ
-                      GROUP_EXECUTE GROUP_READ)
-
-will install the ``icons`` directory to ``share/myproj/icons`` and the
-``scripts`` directory to ``share/myproj``.  The icons will get default
-file permissions, the scripts will be given specific permissions, and any
-``CVS`` directories will be excluded.
-
-Custom Installation Logic
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  install([[SCRIPT <file>] [CODE <code>]]
-          [COMPONENT <component>] [...])
-
-The ``SCRIPT`` form will invoke the given CMake script files during
-installation.  If the script file name is a relative path it will be
-interpreted with respect to the current source directory.  The ``CODE``
-form will invoke the given CMake code during installation.  Code is
-specified as a single argument inside a double-quoted string.  For
-example, the code
-
-.. code-block:: cmake
-
-  install(CODE "MESSAGE(\"Sample install message.\")")
-
-will print a message during installation.
-
-Installing Exports
-^^^^^^^^^^^^^^^^^^
-
-::
-
-  install(EXPORT <export-name> DESTINATION <dir>
-          [NAMESPACE <namespace>] [FILE <name>.cmake]
-          [PERMISSIONS permissions...]
-          [CONFIGURATIONS [Debug|Release|...]]
-          [EXPORT_LINK_INTERFACE_LIBRARIES]
-          [COMPONENT <component>])
-
-The ``EXPORT`` form generates and installs a CMake file containing code to
-import targets from the installation tree into another project.
-Target installations are associated with the export ``<export-name>``
-using the ``EXPORT`` option of the ``install(TARGETS)`` signature
-documented above.  The ``NAMESPACE`` option will prepend ``<namespace>`` to
-the target names as they are written to the import file.  By default
-the generated file will be called ``<export-name>.cmake`` but the ``FILE``
-option may be used to specify a different name.  The value given to
-the ``FILE`` option must be a file name with the ``.cmake`` extension.
-If a ``CONFIGURATIONS`` option is given then the file will only be installed
-when one of the named configurations is installed.  Additionally, the
-generated import file will reference only the matching target
-configurations.  The ``EXPORT_LINK_INTERFACE_LIBRARIES`` keyword, if
-present, causes the contents of the properties matching
-``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?`` to be exported, when
-policy :policy:`CMP0022` is ``NEW``.  If a ``COMPONENT`` option is
-specified that does not match that given to the targets associated with
-``<export-name>`` the behavior is undefined.  If a library target is
-included in the export but a target to which it links is not included
-the behavior is unspecified.
-
-The ``EXPORT`` form is useful to help outside projects use targets built
-and installed by the current project.  For example, the code
-
-.. code-block:: cmake
-
-  install(TARGETS myexe EXPORT myproj DESTINATION bin)
-  install(EXPORT myproj NAMESPACE mp_ DESTINATION lib/myproj)
-
-will install the executable myexe to ``<prefix>/bin`` and code to import
-it in the file ``<prefix>/lib/myproj/myproj.cmake``.  An outside project
-may load this file with the include command and reference the ``myexe``
-executable from the installation tree using the imported target name
-``mp_myexe`` as if the target were built in its own tree.
-
-.. note::
-  This command supercedes the :command:`install_targets` command and
-  the :prop_tgt:`PRE_INSTALL_SCRIPT` and :prop_tgt:`POST_INSTALL_SCRIPT`
-  target properties.  It also replaces the ``FILES`` forms of the
-  :command:`install_files` and :command:`install_programs` commands.
-  The processing order of these install rules relative to
-  those generated by :command:`install_targets`,
-  :command:`install_files`, and :command:`install_programs` commands
-  is not defined.
diff --git a/share/cmake-3.2/Help/command/install_files.rst b/share/cmake-3.2/Help/command/install_files.rst
deleted file mode 100644
index 7b6bd81..0000000
--- a/share/cmake-3.2/Help/command/install_files.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-install_files
--------------
-
-Deprecated.  Use the install(FILES ) command instead.
-
-This command has been superceded by the install command.  It is
-provided for compatibility with older CMake code.  The FILES form is
-directly replaced by the FILES form of the install command.  The
-regexp form can be expressed more clearly using the GLOB form of the
-file command.
-
-::
-
-  install_files(<dir> extension file file ...)
-
-Create rules to install the listed files with the given extension into
-the given directory.  Only files existing in the current source tree
-or its corresponding location in the binary tree may be listed.  If a
-file specified already has an extension, that extension will be
-removed first.  This is useful for providing lists of source files
-such as foo.cxx when you want the corresponding foo.h to be installed.
-A typical extension is '.h'.
-
-::
-
-  install_files(<dir> regexp)
-
-Any files in the current source directory that match the regular
-expression will be installed.
-
-::
-
-  install_files(<dir> FILES file file ...)
-
-Any files listed after the FILES keyword will be installed explicitly
-from the names given.  Full paths are allowed in this form.
-
-The directory <dir> is relative to the installation prefix, which is
-stored in the variable CMAKE_INSTALL_PREFIX.
diff --git a/share/cmake-3.2/Help/command/install_programs.rst b/share/cmake-3.2/Help/command/install_programs.rst
deleted file mode 100644
index 26789d8..0000000
--- a/share/cmake-3.2/Help/command/install_programs.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-install_programs
-----------------
-
-Deprecated. Use the install(PROGRAMS ) command instead.
-
-This command has been superceded by the install command.  It is
-provided for compatibility with older CMake code.  The FILES form is
-directly replaced by the PROGRAMS form of the INSTALL command.  The
-regexp form can be expressed more clearly using the GLOB form of the
-FILE command.
-
-::
-
-  install_programs(<dir> file1 file2 [file3 ...])
-  install_programs(<dir> FILES file1 [file2 ...])
-
-Create rules to install the listed programs into the given directory.
-Use the FILES argument to guarantee that the file list version of the
-command will be used even when there is only one argument.
-
-::
-
-  install_programs(<dir> regexp)
-
-In the second form any program in the current source directory that
-matches the regular expression will be installed.
-
-This command is intended to install programs that are not built by
-cmake, such as shell scripts.  See the TARGETS form of the INSTALL
-command to create installation rules for targets built by cmake.
-
-The directory <dir> is relative to the installation prefix, which is
-stored in the variable CMAKE_INSTALL_PREFIX.
diff --git a/share/cmake-3.2/Help/command/install_targets.rst b/share/cmake-3.2/Help/command/install_targets.rst
deleted file mode 100644
index caa933f..0000000
--- a/share/cmake-3.2/Help/command/install_targets.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-install_targets
----------------
-
-Deprecated. Use the install(TARGETS )  command instead.
-
-This command has been superceded by the install command.  It is
-provided for compatibility with older CMake code.
-
-::
-
-  install_targets(<dir> [RUNTIME_DIRECTORY dir] target target)
-
-Create rules to install the listed targets into the given directory.
-The directory <dir> is relative to the installation prefix, which is
-stored in the variable CMAKE_INSTALL_PREFIX.  If RUNTIME_DIRECTORY is
-specified, then on systems with special runtime files (Windows DLL),
-the files will be copied to that directory.
diff --git a/share/cmake-3.2/Help/command/link_directories.rst b/share/cmake-3.2/Help/command/link_directories.rst
deleted file mode 100644
index bdc94cd..0000000
--- a/share/cmake-3.2/Help/command/link_directories.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-link_directories
-----------------
-
-Specify directories in which the linker will look for libraries.
-
-::
-
-  link_directories(directory1 directory2 ...)
-
-Specify the paths in which the linker should search for libraries.
-The command will apply only to targets created after it is called.
-Relative paths given to this command are interpreted as relative to
-the current source directory, see CMP0015.
-
-Note that this command is rarely necessary.  Library locations
-returned by find_package() and find_library() are absolute paths.
-Pass these absolute library file paths directly to the
-target_link_libraries() command.  CMake will ensure the linker finds
-them.
diff --git a/share/cmake-3.2/Help/command/list.rst b/share/cmake-3.2/Help/command/list.rst
deleted file mode 100644
index aeb1e94..0000000
--- a/share/cmake-3.2/Help/command/list.rst
+++ /dev/null
@@ -1,61 +0,0 @@
-list
-----
-
-List operations.
-
-::
-
-  list(LENGTH <list> <output variable>)
-  list(GET <list> <element index> [<element index> ...]
-       <output variable>)
-  list(APPEND <list> [<element> ...])
-  list(FIND <list> <value> <output variable>)
-  list(INSERT <list> <element_index> <element> [<element> ...])
-  list(REMOVE_ITEM <list> <value> [<value> ...])
-  list(REMOVE_AT <list> <index> [<index> ...])
-  list(REMOVE_DUPLICATES <list>)
-  list(REVERSE <list>)
-  list(SORT <list>)
-
-LENGTH will return a given list's length.
-
-GET will return list of elements specified by indices from the list.
-
-APPEND will append elements to the list.
-
-FIND will return the index of the element specified in the list or -1
-if it wasn't found.
-
-INSERT will insert elements to the list to the specified location.
-
-REMOVE_AT and REMOVE_ITEM will remove items from the list.  The
-difference is that REMOVE_ITEM will remove the given items, while
-REMOVE_AT will remove the items at the given indices.
-
-REMOVE_DUPLICATES will remove duplicated items in the list.
-
-REVERSE reverses the contents of the list in-place.
-
-SORT sorts the list in-place alphabetically.
-
-The list subcommands APPEND, INSERT, REMOVE_AT, REMOVE_ITEM,
-REMOVE_DUPLICATES, REVERSE and SORT may create new values for the list
-within the current CMake variable scope.  Similar to the SET command,
-the LIST command creates new variable values in the current scope,
-even if the list itself is actually defined in a parent scope.  To
-propagate the results of these operations upwards, use SET with
-PARENT_SCOPE, SET with CACHE INTERNAL, or some other means of value
-propagation.
-
-NOTES: A list in cmake is a ; separated group of strings.  To create a
-list the set command can be used.  For example, set(var a b c d e)
-creates a list with a;b;c;d;e, and set(var "a b c d e") creates a
-string or a list with one item in it.   (Note macro arguments are not
-variables, and therefore cannot be used in LIST commands.)
-
-When specifying index values, if <element index> is 0 or greater, it
-is indexed from the beginning of the list, with 0 representing the
-first list element.  If <element index> is -1 or lesser, it is indexed
-from the end of the list, with -1 representing the last list element.
-Be careful when counting with negative indices: they do not start from
-0.  -0 is equivalent to 0, the first list element.
diff --git a/share/cmake-3.2/Help/command/load_cache.rst b/share/cmake-3.2/Help/command/load_cache.rst
deleted file mode 100644
index b7484cb..0000000
--- a/share/cmake-3.2/Help/command/load_cache.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-load_cache
-----------
-
-Load in the values from another project's CMake cache.
-
-::
-
-  load_cache(pathToCacheFile READ_WITH_PREFIX
-             prefix entry1...)
-
-Read the cache and store the requested entries in variables with their
-name prefixed with the given prefix.  This only reads the values, and
-does not create entries in the local project's cache.
-
-::
-
-  load_cache(pathToCacheFile [EXCLUDE entry1...]
-             [INCLUDE_INTERNALS entry1...])
-
-Load in the values from another cache and store them in the local
-project's cache as internal entries.  This is useful for a project
-that depends on another project built in a different tree.  EXCLUDE
-option can be used to provide a list of entries to be excluded.
-INCLUDE_INTERNALS can be used to provide a list of internal entries to
-be included.  Normally, no internal entries are brought in.  Use of
-this form of the command is strongly discouraged, but it is provided
-for backward compatibility.
diff --git a/share/cmake-3.2/Help/command/load_command.rst b/share/cmake-3.2/Help/command/load_command.rst
deleted file mode 100644
index fc316d4..0000000
--- a/share/cmake-3.2/Help/command/load_command.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-load_command
-------------
-
-Disallowed.  See CMake Policy :policy:`CMP0031`.
-
-Load a command into a running CMake.
-
-::
-
-  load_command(COMMAND_NAME <loc1> [loc2 ...])
-
-The given locations are searched for a library whose name is
-cmCOMMAND_NAME.  If found, it is loaded as a module and the command is
-added to the set of available CMake commands.  Usually, TRY_COMPILE is
-used before this command to compile the module.  If the command is
-successfully loaded a variable named
-
-::
-
-  CMAKE_LOADED_COMMAND_<COMMAND_NAME>
-
-will be set to the full path of the module that was loaded.  Otherwise
-the variable will not be set.
diff --git a/share/cmake-3.2/Help/command/macro.rst b/share/cmake-3.2/Help/command/macro.rst
deleted file mode 100644
index 258dc50..0000000
--- a/share/cmake-3.2/Help/command/macro.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-macro
------
-
-Start recording a macro for later invocation as a command.
-
-::
-
-  macro(<name> [arg1 [arg2 [arg3 ...]]])
-    COMMAND1(ARGS ...)
-    COMMAND2(ARGS ...)
-    ...
-  endmacro(<name>)
-
-Define a macro named <name> that takes arguments named arg1 arg2 arg3
-(...).  Commands listed after macro, but before the matching endmacro,
-are not invoked until the macro is invoked.  When it is invoked, the
-commands recorded in the macro are first modified by replacing formal
-parameters (``${arg1}``) with the arguments passed, and then invoked as
-normal commands.  In addition to referencing the formal parameters you
-can reference the values ``${ARGC}`` which will be set to the number of
-arguments passed into the function as well as ``${ARGV0}`` ``${ARGV1}``
-``${ARGV2}`` ...  which will have the actual values of the arguments
-passed in.  This facilitates creating macros with optional arguments.
-Additionally ``${ARGV}`` holds the list of all arguments given to the
-macro and ``${ARGN}`` holds the list of arguments past the last expected
-argument.
-
-See the cmake_policy() command documentation for the behavior of
-policies inside macros.
-
-Macro Argument Caveats
-^^^^^^^^^^^^^^^^^^^^^^
-
-Note that the parameters to a macro and values such as ``ARGN`` are
-not variables in the usual CMake sense.  They are string
-replacements much like the C preprocessor would do with a macro.
-Therefore you will NOT be able to use commands like::
-
- if(ARGV1) # ARGV1 is not a variable
- foreach(loop_var IN LISTS ARGN) # ARGN is not a variable
-
-In the first case you can use ``if(${ARGV1})``, in the second case, you can
-use ``foreach(loop_var ${ARGN})`` but this will skip empty arguments.
-If you need to include them, you can use::
-
- set(list_var "${ARGN}")
- foreach(loop_var IN LISTS list_var)
-
-Note that if you have a variable with the same name in the scope from
-which the macro is called, using unreferenced names will use the
-existing variable instead of the arguments. For example::
-
- macro(_BAR)
-   foreach(arg IN LISTS ARGN)
-     [...]
-   endforeach()
- endmacro()
-
- function(_FOO)
-   _bar(x y z)
- endfunction()
-
- _foo(a b c)
-
-Will loop over ``a;b;c`` and not over ``x;y;z`` as one might be expecting.
-If you want true CMake variables and/or better CMake scope control you
-should look at the function command.
diff --git a/share/cmake-3.2/Help/command/make_directory.rst b/share/cmake-3.2/Help/command/make_directory.rst
deleted file mode 100644
index 44dbe97..0000000
--- a/share/cmake-3.2/Help/command/make_directory.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-make_directory
---------------
-
-Deprecated. Use the file(MAKE_DIRECTORY ) command instead.
-
-::
-
-  make_directory(directory)
-
-Creates the specified directory.  Full paths should be given.  Any
-parent directories that do not exist will also be created.  Use with
-care.
diff --git a/share/cmake-3.2/Help/command/mark_as_advanced.rst b/share/cmake-3.2/Help/command/mark_as_advanced.rst
deleted file mode 100644
index 30b1289..0000000
--- a/share/cmake-3.2/Help/command/mark_as_advanced.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-mark_as_advanced
-----------------
-
-Mark cmake cached variables as advanced.
-
-::
-
-  mark_as_advanced([CLEAR|FORCE] VAR [VAR2 ...])
-
-Mark the named cached variables as advanced.  An advanced variable
-will not be displayed in any of the cmake GUIs unless the show
-advanced option is on.  If CLEAR is the first argument advanced
-variables are changed back to unadvanced.  If FORCE is the first
-argument, then the variable is made advanced.  If neither FORCE nor
-CLEAR is specified, new values will be marked as advanced, but if the
-variable already has an advanced/non-advanced state, it will not be
-changed.
-
-It does nothing in script mode.
diff --git a/share/cmake-3.2/Help/command/math.rst b/share/cmake-3.2/Help/command/math.rst
deleted file mode 100644
index 38fde1d..0000000
--- a/share/cmake-3.2/Help/command/math.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-math
-----
-
-Mathematical expressions.
-
-::
-
-  math(EXPR <output variable> <math expression>)
-
-EXPR evaluates mathematical expression and returns result in the
-output variable.  Example mathematical expression is '5 * ( 10 + 13
-)'.  Supported operators are + - * / % | & ^ ~ << >> * / %.  They have
-the same meaning as they do in C code.
diff --git a/share/cmake-3.2/Help/command/message.rst b/share/cmake-3.2/Help/command/message.rst
deleted file mode 100644
index a20325a..0000000
--- a/share/cmake-3.2/Help/command/message.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-message
--------
-
-Display a message to the user.
-
-::
-
-  message([<mode>] "message to display" ...)
-
-The optional <mode> keyword determines the type of message:
-
-::
-
-  (none)         = Important information
-  STATUS         = Incidental information
-  WARNING        = CMake Warning, continue processing
-  AUTHOR_WARNING = CMake Warning (dev), continue processing
-  SEND_ERROR     = CMake Error, continue processing,
-                                but skip generation
-  FATAL_ERROR    = CMake Error, stop processing and generation
-  DEPRECATION    = CMake Deprecation Error or Warning if variable
-                   CMAKE_ERROR_DEPRECATED or CMAKE_WARN_DEPRECATED
-                   is enabled, respectively, else no message.
-
-The CMake command-line tool displays STATUS messages on stdout and all
-other message types on stderr.  The CMake GUI displays all messages in
-its log area.  The interactive dialogs (ccmake and CMakeSetup) show
-STATUS messages one at a time on a status line and other messages in
-interactive pop-up boxes.
-
-CMake Warning and Error message text displays using a simple markup
-language.  Non-indented text is formatted in line-wrapped paragraphs
-delimited by newlines.  Indented text is considered pre-formatted.
diff --git a/share/cmake-3.2/Help/command/option.rst b/share/cmake-3.2/Help/command/option.rst
deleted file mode 100644
index 244ed07..0000000
--- a/share/cmake-3.2/Help/command/option.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-option
-------
-
-Provides an option that the user can optionally select.
-
-::
-
-  option(<option_variable> "help string describing option"
-         [initial value])
-
-Provide an option for the user to select as ON or OFF.  If no initial
-value is provided, OFF is used.
-
-If you have options that depend on the values of other options, see
-the module help for CMakeDependentOption.
diff --git a/share/cmake-3.2/Help/command/project.rst b/share/cmake-3.2/Help/command/project.rst
deleted file mode 100644
index c601a01..0000000
--- a/share/cmake-3.2/Help/command/project.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-project
--------
-
-Set a name, version, and enable languages for the entire project.
-
-.. code-block:: cmake
-
- project(<PROJECT-NAME> [LANGUAGES] [<language-name>...])
- project(<PROJECT-NAME>
-         [VERSION <major>[.<minor>[.<patch>[.<tweak>]]]]
-         [LANGUAGES <language-name>...])
-
-Sets the name of the project and stores the name in the
-:variable:`PROJECT_NAME` variable.  Additionally this sets variables
-
-* :variable:`PROJECT_SOURCE_DIR`,
-  :variable:`<PROJECT-NAME>_SOURCE_DIR`
-* :variable:`PROJECT_BINARY_DIR`,
-  :variable:`<PROJECT-NAME>_BINARY_DIR`
-
-If ``VERSION`` is specified, given components must be non-negative integers.
-If ``VERSION`` is not specified, the default version is the empty string.
-The ``VERSION`` option may not be used unless policy :policy:`CMP0048` is
-set to ``NEW``.
-
-The :command:`project()` command stores the version number and its components
-in variables
-
-* :variable:`PROJECT_VERSION`,
-  :variable:`<PROJECT-NAME>_VERSION`
-* :variable:`PROJECT_VERSION_MAJOR`,
-  :variable:`<PROJECT-NAME>_VERSION_MAJOR`
-* :variable:`PROJECT_VERSION_MINOR`,
-  :variable:`<PROJECT-NAME>_VERSION_MINOR`
-* :variable:`PROJECT_VERSION_PATCH`,
-  :variable:`<PROJECT-NAME>_VERSION_PATCH`
-* :variable:`PROJECT_VERSION_TWEAK`,
-  :variable:`<PROJECT-NAME>_VERSION_TWEAK`
-
-Variables corresponding to unspecified versions are set to the empty string
-(if policy :policy:`CMP0048` is set to ``NEW``).
-
-Optionally you can specify which languages your project supports.
-Example languages are ``C``, ``CXX`` (i.e.  C++), ``Fortran``, etc.
-By default ``C`` and ``CXX`` are enabled if no language options are
-given.  Specify language ``NONE``, or use the ``LANGUAGES`` keyword
-and list no languages, to skip enabling any languages.
-
-If a variable exists called :variable:`CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE`,
-the file pointed to by that variable will be included as the last step of the
-project command.
-
-The top-level ``CMakeLists.txt`` file for a project must contain a
-literal, direct call to the :command:`project` command; loading one
-through the :command:`include` command is not sufficient.  If no such
-call exists CMake will implicitly add one to the top that enables the
-default languages (``C`` and ``CXX``).
diff --git a/share/cmake-3.2/Help/command/qt_wrap_cpp.rst b/share/cmake-3.2/Help/command/qt_wrap_cpp.rst
deleted file mode 100644
index 81bbc06..0000000
--- a/share/cmake-3.2/Help/command/qt_wrap_cpp.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-qt_wrap_cpp
------------
-
-Create Qt Wrappers.
-
-::
-
-  qt_wrap_cpp(resultingLibraryName DestName
-              SourceLists ...)
-
-Produce moc files for all the .h files listed in the SourceLists.  The
-moc files will be added to the library using the DestName source list.
diff --git a/share/cmake-3.2/Help/command/qt_wrap_ui.rst b/share/cmake-3.2/Help/command/qt_wrap_ui.rst
deleted file mode 100644
index 4e033a8..0000000
--- a/share/cmake-3.2/Help/command/qt_wrap_ui.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-qt_wrap_ui
-----------
-
-Create Qt user interfaces Wrappers.
-
-::
-
-  qt_wrap_ui(resultingLibraryName HeadersDestName
-             SourcesDestName SourceLists ...)
-
-Produce .h and .cxx files for all the .ui files listed in the
-SourceLists.  The .h files will be added to the library using the
-HeadersDestNamesource list.  The .cxx files will be added to the
-library using the SourcesDestNamesource list.
diff --git a/share/cmake-3.2/Help/command/remove.rst b/share/cmake-3.2/Help/command/remove.rst
deleted file mode 100644
index ddf0e9a..0000000
--- a/share/cmake-3.2/Help/command/remove.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-remove
-------
-
-Deprecated. Use the list(REMOVE_ITEM ) command instead.
-
-::
-
-  remove(VAR VALUE VALUE ...)
-
-Removes VALUE from the variable VAR.  This is typically used to remove
-entries from a vector (e.g.  semicolon separated list).  VALUE is
-expanded.
diff --git a/share/cmake-3.2/Help/command/remove_definitions.rst b/share/cmake-3.2/Help/command/remove_definitions.rst
deleted file mode 100644
index 566da6e..0000000
--- a/share/cmake-3.2/Help/command/remove_definitions.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-remove_definitions
-------------------
-
-Removes -D define flags added by add_definitions.
-
-::
-
-  remove_definitions(-DFOO -DBAR ...)
-
-Removes flags (added by add_definitions) from the compiler command
-line for sources in the current directory and below.
diff --git a/share/cmake-3.2/Help/command/return.rst b/share/cmake-3.2/Help/command/return.rst
deleted file mode 100644
index 899470c..0000000
--- a/share/cmake-3.2/Help/command/return.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-return
-------
-
-Return from a file, directory or function.
-
-::
-
-  return()
-
-Returns from a file, directory or function.  When this command is
-encountered in an included file (via include() or find_package()), it
-causes processing of the current file to stop and control is returned
-to the including file.  If it is encountered in a file which is not
-included by another file, e.g.  a CMakeLists.txt, control is returned
-to the parent directory if there is one.  If return is called in a
-function, control is returned to the caller of the function.  Note
-that a macro is not a function and does not handle return like a
-function does.
diff --git a/share/cmake-3.2/Help/command/separate_arguments.rst b/share/cmake-3.2/Help/command/separate_arguments.rst
deleted file mode 100644
index a876595..0000000
--- a/share/cmake-3.2/Help/command/separate_arguments.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-separate_arguments
-------------------
-
-Parse space-separated arguments into a semicolon-separated list.
-
-::
-
-  separate_arguments(<var> <UNIX|WINDOWS>_COMMAND "<args>")
-
-Parses a unix- or windows-style command-line string "<args>" and
-stores a semicolon-separated list of the arguments in <var>.  The
-entire command line must be given in one "<args>" argument.
-
-The UNIX_COMMAND mode separates arguments by unquoted whitespace.  It
-recognizes both single-quote and double-quote pairs.  A backslash
-escapes the next literal character (\" is "); there are no special
-escapes (\n is just n).
-
-The WINDOWS_COMMAND mode parses a windows command-line using the same
-syntax the runtime library uses to construct argv at startup.  It
-separates arguments by whitespace that is not double-quoted.
-Backslashes are literal unless they precede double-quotes.  See the
-MSDN article "Parsing C Command-Line Arguments" for details.
-
-::
-
-  separate_arguments(VARIABLE)
-
-Convert the value of VARIABLE to a semi-colon separated list.  All
-spaces are replaced with ';'.  This helps with generating command
-lines.
diff --git a/share/cmake-3.2/Help/command/set.rst b/share/cmake-3.2/Help/command/set.rst
deleted file mode 100644
index 7a59550..0000000
--- a/share/cmake-3.2/Help/command/set.rst
+++ /dev/null
@@ -1,116 +0,0 @@
-set
----
-
-Set a CMake, cache or environment variable to a given value.
-
-::
-
-  set(<variable> <value>
-      [[CACHE <type> <docstring> [FORCE]] | PARENT_SCOPE])
-
-Within CMake sets <variable> to the value <value>.  <value> is
-expanded before <variable> is set to it.  Normally, set will set a
-regular CMake variable.  If CACHE is present, then the <variable> is
-put in the cache instead, unless it is already in the cache.  See
-section 'Variable types in CMake' below for details of regular and
-cache variables and their interactions.  If CACHE is used, <type> and
-<docstring> are required.  <type> is used by the CMake GUI to choose a
-widget with which the user sets a value.  The value for <type> may be
-one of
-
-::
-
-  FILEPATH = File chooser dialog.
-  PATH     = Directory chooser dialog.
-  STRING   = Arbitrary string.
-  BOOL     = Boolean ON/OFF checkbox.
-  INTERNAL = No GUI entry (used for persistent variables).
-
-If <type> is INTERNAL, the cache variable is marked as internal, and
-will not be shown to the user in tools like cmake-gui.  This is
-intended for values that should be persisted in the cache, but which
-users should not normally change.  INTERNAL implies FORCE.
-
-Normally, set(...CACHE...) creates cache variables, but does not
-modify them.  If FORCE is specified, the value of the cache variable
-is set, even if the variable is already in the cache.  This should
-normally be avoided, as it will remove any changes to the cache
-variable's value by the user.
-
-If PARENT_SCOPE is present, the variable will be set in the scope
-above the current scope.  Each new directory or function creates a new
-scope.  This command will set the value of a variable into the parent
-directory or calling function (whichever is applicable to the case at
-hand).  PARENT_SCOPE cannot be combined with CACHE.
-
-If <value> is not specified then the variable is removed instead of
-set.  See also: the unset() command.
-
-::
-
-  set(<variable> <value1> ... <valueN>)
-
-In this case <variable> is set to a semicolon separated list of
-values.
-
-<variable> can be an environment variable such as:
-
-::
-
-  set( ENV{PATH} /home/martink )
-
-in which case the environment variable will be set.
-
-*** Variable types in CMake ***
-
-In CMake there are two types of variables: normal variables and cache
-variables.  Normal variables are meant for the internal use of the
-script (just like variables in most programming languages); they are
-not persisted across CMake runs.  Cache variables (unless set with
-INTERNAL) are mostly intended for configuration settings where the
-first CMake run determines a suitable default value, which the user
-can then override, by editing the cache with tools such as ccmake or
-cmake-gui.  Cache variables are stored in the CMake cache file, and
-are persisted across CMake runs.
-
-Both types can exist at the same time with the same name but different
-values.  When ${FOO} is evaluated, CMake first looks for a normal
-variable 'FOO' in scope and uses it if set.  If and only if no normal
-variable exists then it falls back to the cache variable 'FOO'.
-
-Some examples:
-
-The code 'set(FOO "x")' sets the normal variable 'FOO'.  It does not
-touch the cache, but it will hide any existing cache value 'FOO'.
-
-The code 'set(FOO "x" CACHE ...)' checks for 'FOO' in the cache,
-ignoring any normal variable of the same name.  If 'FOO' is in the
-cache then nothing happens to either the normal variable or the cache
-variable.  If 'FOO' is not in the cache, then it is added to the
-cache.
-
-Finally, whenever a cache variable is added or modified by a command,
-CMake also *removes* the normal variable of the same name from the
-current scope so that an immediately following evaluation of it will
-expose the newly cached value.
-
-Normally projects should avoid using normal and cache variables of the
-same name, as this interaction can be hard to follow.  However, in
-some situations it can be useful.  One example (used by some
-projects):
-
-A project has a subproject in its source tree.  The child project has
-its own CMakeLists.txt, which is included from the parent
-CMakeLists.txt using add_subdirectory().  Now, if the parent and the
-child project provide the same option (for example a compiler option),
-the parent gets the first chance to add a user-editable option to the
-cache.  Normally, the child would then use the same value that the
-parent uses.  However, it may be necessary to hard-code the value for
-the child project's option while still allowing the user to edit the
-value used by the parent project.  The parent project can achieve this
-simply by setting a normal variable with the same name as the option
-in a scope sufficient to hide the option's cache variable from the
-child completely.  The parent has already set the cache variable, so
-the child's set(...CACHE...) will do nothing, and evaluating the
-option variable will use the value from the normal variable, which
-hides the cache variable.
diff --git a/share/cmake-3.2/Help/command/set_directory_properties.rst b/share/cmake-3.2/Help/command/set_directory_properties.rst
deleted file mode 100644
index 834013a..0000000
--- a/share/cmake-3.2/Help/command/set_directory_properties.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-set_directory_properties
-------------------------
-
-Set a property of the directory.
-
-::
-
-  set_directory_properties(PROPERTIES prop1 value1 prop2 value2)
-
-Set a property for the current directory and subdirectories.  If the
-property is not found, CMake will report an error.  The properties
-include: INCLUDE_DIRECTORIES, LINK_DIRECTORIES,
-INCLUDE_REGULAR_EXPRESSION, and ADDITIONAL_MAKE_CLEAN_FILES.
-ADDITIONAL_MAKE_CLEAN_FILES is a list of files that will be cleaned as
-a part of "make clean" stage.
diff --git a/share/cmake-3.2/Help/command/set_property.rst b/share/cmake-3.2/Help/command/set_property.rst
deleted file mode 100644
index 6200230..0000000
--- a/share/cmake-3.2/Help/command/set_property.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-set_property
-------------
-
-Set a named property in a given scope.
-
-::
-
-  set_property(<GLOBAL                            |
-                DIRECTORY [dir]                   |
-                TARGET    [target1 [target2 ...]] |
-                SOURCE    [src1 [src2 ...]]       |
-                INSTALL   [file1 [file2 ...]]     |
-                TEST      [test1 [test2 ...]]     |
-                CACHE     [entry1 [entry2 ...]]>
-               [APPEND] [APPEND_STRING]
-               PROPERTY <name> [value1 [value2 ...]])
-
-Set one property on zero or more objects of a scope.  The first
-argument determines the scope in which the property is set.  It must
-be one of the following:
-
-``GLOBAL``
-  Scope is unique and does not accept a name.
-
-``DIRECTORY``
-  Scope defaults to the current directory but another
-  directory (already processed by CMake) may be named by full or
-  relative path.
-
-``TARGET``
-  Scope may name zero or more existing targets.
-
-``SOURCE``
-  Scope may name zero or more source files.  Note that source
-  file properties are visible only to targets added in the same
-  directory (CMakeLists.txt).
-
-``INSTALL``
-  Scope may name zero or more installed file paths.
-  These are made available to CPack to influence deployment.
-
-  Both the property key and value may use generator expressions.
-  Specific properties may apply to installed files and/or directories.
-
-  Path components have to be separated by forward slashes,
-  must be normalized and are case sensitive.
-
-  To reference the installation prefix itself with a relative path use ".".
-
-  Currently installed file properties are only defined for
-  the WIX generator where the given paths are relative
-  to the installation prefix.
-
-``TEST``
-  Scope may name zero or more existing tests.
-
-``CACHE``
-  Scope must name zero or more cache existing entries.
-
-The required ``PROPERTY`` option is immediately followed by the name of
-the property to set.  Remaining arguments are used to compose the
-property value in the form of a semicolon-separated list.  If the
-``APPEND`` option is given the list is appended to any existing property
-value.  If the ``APPEND_STRING`` option is given the string is append to any
-existing property value as string, i.e.  it results in a longer string
-and not a list of strings.
diff --git a/share/cmake-3.2/Help/command/set_source_files_properties.rst b/share/cmake-3.2/Help/command/set_source_files_properties.rst
deleted file mode 100644
index 8ea02a3..0000000
--- a/share/cmake-3.2/Help/command/set_source_files_properties.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-set_source_files_properties
----------------------------
-
-Source files can have properties that affect how they are built.
-
-::
-
-  set_source_files_properties([file1 [file2 [...]]]
-                              PROPERTIES prop1 value1
-                              [prop2 value2 [...]])
-
-Set properties associated with source files using a key/value paired
-list.  See properties documentation for those known to CMake.
-Unrecognized properties are ignored.  Source file properties are
-visible only to targets added in the same directory (CMakeLists.txt).
diff --git a/share/cmake-3.2/Help/command/set_target_properties.rst b/share/cmake-3.2/Help/command/set_target_properties.rst
deleted file mode 100644
index f65ee24..0000000
--- a/share/cmake-3.2/Help/command/set_target_properties.rst
+++ /dev/null
@@ -1,104 +0,0 @@
-set_target_properties
----------------------
-
-Targets can have properties that affect how they are built.
-
-::
-
-  set_target_properties(target1 target2 ...
-                        PROPERTIES prop1 value1
-                        prop2 value2 ...)
-
-Set properties on a target.  The syntax for the command is to list all
-the files you want to change, and then provide the values you want to
-set next.  You can use any prop value pair you want and extract it
-later with the GET_TARGET_PROPERTY command.
-
-Properties that affect the name of a target's output file are as
-follows.  The PREFIX and SUFFIX properties override the default target
-name prefix (such as "lib") and suffix (such as ".so").  IMPORT_PREFIX
-and IMPORT_SUFFIX are the equivalent properties for the import library
-corresponding to a DLL (for SHARED library targets).  OUTPUT_NAME sets
-the real name of a target when it is built and can be used to help
-create two targets of the same name even though CMake requires unique
-logical target names.  There is also a <CONFIG>_OUTPUT_NAME that can
-set the output name on a per-configuration basis.  <CONFIG>_POSTFIX
-sets a postfix for the real name of the target when it is built under
-the configuration named by <CONFIG> (in upper-case, such as
-"DEBUG_POSTFIX").  The value of this property is initialized when the
-target is created to the value of the variable CMAKE_<CONFIG>_POSTFIX
-(except for executable targets because earlier CMake versions which
-did not use this variable for executables).
-
-The LINK_FLAGS property can be used to add extra flags to the link
-step of a target.  LINK_FLAGS_<CONFIG> will add to the configuration
-<CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO.
-DEFINE_SYMBOL sets the name of the preprocessor symbol defined when
-compiling sources in a shared library.  If not set here then it is set
-to target_EXPORTS by default (with some substitutions if the target is
-not a valid C identifier).  This is useful for headers to know whether
-they are being included from inside their library or outside to
-properly setup dllexport/dllimport decorations.  The COMPILE_FLAGS
-property sets additional compiler flags used to build sources within
-the target.  It may also be used to pass additional preprocessor
-definitions.
-
-The LINKER_LANGUAGE property is used to change the tool used to link
-an executable or shared library.  The default is set the language to
-match the files in the library.  CXX and C are common values for this
-property.
-
-For shared libraries VERSION and SOVERSION can be used to specify the
-build version and API version respectively.  When building or
-installing appropriate symlinks are created if the platform supports
-symlinks and the linker supports so-names.  If only one of both is
-specified the missing is assumed to have the same version number.  For
-executables VERSION can be used to specify the build version.  When
-building or installing appropriate symlinks are created if the
-platform supports symlinks.  For shared libraries and executables on
-Windows the VERSION attribute is parsed to extract a "major.minor"
-version number.  These numbers are used as the image version of the
-binary.
-
-There are a few properties used to specify RPATH rules.  INSTALL_RPATH
-is a semicolon-separated list specifying the rpath to use in installed
-targets (for platforms that support it).  INSTALL_RPATH_USE_LINK_PATH
-is a boolean that if set to true will append directories in the linker
-search path and outside the project to the INSTALL_RPATH.
-SKIP_BUILD_RPATH is a boolean specifying whether to skip automatic
-generation of an rpath allowing the target to run from the build tree.
-BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the
-target in the build tree with the INSTALL_RPATH.  This takes
-precedence over SKIP_BUILD_RPATH and avoids the need for relinking
-before installation.  INSTALL_NAME_DIR is a string specifying the
-directory portion of the "install_name" field of shared libraries on
-Mac OSX to use in the installed targets.  When the target is created
-the values of the variables CMAKE_INSTALL_RPATH,
-CMAKE_INSTALL_RPATH_USE_LINK_PATH, CMAKE_SKIP_BUILD_RPATH,
-CMAKE_BUILD_WITH_INSTALL_RPATH, and CMAKE_INSTALL_NAME_DIR are used to
-initialize these properties.
-
-PROJECT_LABEL can be used to change the name of the target in an IDE
-like visual studio.  VS_KEYWORD can be set to change the visual studio
-keyword, for example Qt integration works better if this is set to
-Qt4VSv1.0.
-
-VS_SCC_PROJECTNAME, VS_SCC_LOCALPATH, VS_SCC_PROVIDER and
-VS_SCC_AUXPATH can be set to add support for source control bindings
-in a Visual Studio project file.
-
-VS_GLOBAL_<variable> can be set to add a Visual Studio
-project-specific global variable.  Qt integration works better if
-VS_GLOBAL_QtVersion is set to the Qt version FindQt4.cmake found.  For
-example, "4.7.3"
-
-The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
-way to specify CMake scripts to run before and after installing a
-target.  They are used only when the old INSTALL_TARGETS command is
-used to install the target.  Use the INSTALL command instead.
-
-The EXCLUDE_FROM_DEFAULT_BUILD property is used by the visual studio
-generators.  If it is set to 1 the target will not be part of the
-default build when you select "Build Solution".  This can also be set
-on a per-configuration basis using
-EXCLUDE_FROM_DEFAULT_BUILD_<CONFIG>.
diff --git a/share/cmake-3.2/Help/command/set_tests_properties.rst b/share/cmake-3.2/Help/command/set_tests_properties.rst
deleted file mode 100644
index afac847..0000000
--- a/share/cmake-3.2/Help/command/set_tests_properties.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-set_tests_properties
---------------------
-
-Set a property of the tests.
-
-::
-
-  set_tests_properties(test1 [test2...] PROPERTIES prop1 value1 prop2 value2)
-
-Set a property for the tests.  If the test is not found, CMake
-will report an error.  Generator expressions will be expanded the same
-as supported by the test's add_test call.  The properties include:
-
-WILL_FAIL: If set to true, this will invert the pass/fail flag of the
-test.
-
-PASS_REGULAR_EXPRESSION: If set, the test output will be checked
-against the specified regular expressions and at least one of the
-regular expressions has to match, otherwise the test will fail.
-
-::
-
-  Example: PASS_REGULAR_EXPRESSION "TestPassed;All ok"
-
-FAIL_REGULAR_EXPRESSION: If set, if the output will match to one of
-specified regular expressions, the test will fail.
-
-::
-
-  Example: FAIL_REGULAR_EXPRESSION "[^a-z]Error;ERROR;Failed"
-
-Both PASS_REGULAR_EXPRESSION and FAIL_REGULAR_EXPRESSION expect a list
-of regular expressions.
-
-TIMEOUT: Setting this will limit the test runtime to the number of
-seconds specified.
diff --git a/share/cmake-3.2/Help/command/string.rst b/share/cmake-3.2/Help/command/string.rst
deleted file mode 100644
index 351385b..0000000
--- a/share/cmake-3.2/Help/command/string.rst
+++ /dev/null
@@ -1,178 +0,0 @@
-string
-------
-
-String operations.
-
-::
-
-  string(REGEX MATCH <regular_expression>
-         <output variable> <input> [<input>...])
-  string(REGEX MATCHALL <regular_expression>
-         <output variable> <input> [<input>...])
-  string(REGEX REPLACE <regular_expression>
-         <replace_expression> <output variable>
-         <input> [<input>...])
-  string(REPLACE <match_string>
-         <replace_string> <output variable>
-         <input> [<input>...])
-  string(CONCAT <output variable> [<input>...])
-  string(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512>
-         <output variable> <input>)
-  string(COMPARE EQUAL <string1> <string2> <output variable>)
-  string(COMPARE NOTEQUAL <string1> <string2> <output variable>)
-  string(COMPARE LESS <string1> <string2> <output variable>)
-  string(COMPARE GREATER <string1> <string2> <output variable>)
-  string(ASCII <number> [<number> ...] <output variable>)
-  string(CONFIGURE <string1> <output variable>
-         [@ONLY] [ESCAPE_QUOTES])
-  string(TOUPPER <string1> <output variable>)
-  string(TOLOWER <string1> <output variable>)
-  string(LENGTH <string> <output variable>)
-  string(SUBSTRING <string> <begin> <length> <output variable>)
-  string(STRIP <string> <output variable>)
-  string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>]
-         [RANDOM_SEED <seed>] <output variable>)
-  string(FIND <string> <substring> <output variable> [REVERSE])
-  string(TIMESTAMP <output variable> [<format string>] [UTC])
-  string(MAKE_C_IDENTIFIER <input string> <output variable>)
-  string(GENEX_STRIP <input string> <output variable>)
-  string(UUID <output variable> NAMESPACE <namespace> NAME <name>
-         TYPE <MD5|SHA1> [UPPER])
-
-REGEX MATCH will match the regular expression once and store the match
-in the output variable.
-
-REGEX MATCHALL will match the regular expression as many times as
-possible and store the matches in the output variable as a list.
-
-REGEX REPLACE will match the regular expression as many times as
-possible and substitute the replacement expression for the match in
-the output.  The replace expression may refer to paren-delimited
-subexpressions of the match using \1, \2, ..., \9.  Note that two
-backslashes (\\1) are required in CMake code to get a backslash
-through argument parsing.
-
-REPLACE will replace all occurrences of match_string in the input with
-replace_string and store the result in the output.
-
-CONCAT will concatenate all the input arguments together and store
-the result in the named output variable.
-
-MD5, SHA1, SHA224, SHA256, SHA384, and SHA512 will compute a
-cryptographic hash of the input string.
-
-COMPARE EQUAL/NOTEQUAL/LESS/GREATER will compare the strings and store
-true or false in the output variable.
-
-ASCII will convert all numbers into corresponding ASCII characters.
-
-CONFIGURE will transform a string like CONFIGURE_FILE transforms a
-file.
-
-TOUPPER/TOLOWER will convert string to upper/lower characters.
-
-LENGTH will return a given string's length.
-
-SUBSTRING will return a substring of a given string. If length is -1
-the remainder of the string starting at begin will be returned.
-If string is shorter than length then end of string is used instead.
-
-.. note::
-  CMake 3.1 and below reported an error if length pointed past
-  the end of string.
-
-STRIP will return a substring of a given string with leading and
-trailing spaces removed.
-
-RANDOM will return a random string of given length consisting of
-characters from the given alphabet.  Default length is 5 characters
-and default alphabet is all numbers and upper and lower case letters.
-If an integer RANDOM_SEED is given, its value will be used to seed the
-random number generator.
-
-FIND will return the position where the given substring was found in
-the supplied string.  If the REVERSE flag was used, the command will
-search for the position of the last occurrence of the specified
-substring.
-
-The following characters have special meaning in regular expressions:
-
-::
-
-   ^         Matches at beginning of input
-   $         Matches at end of input
-   .         Matches any single character
-   [ ]       Matches any character(s) inside the brackets
-   [^ ]      Matches any character(s) not inside the brackets
-    -        Inside brackets, specifies an inclusive range between
-             characters on either side e.g. [a-f] is [abcdef]
-             To match a literal - using brackets, make it the first
-             or the last character e.g. [+*/-] matches basic
-             mathematical operators.
-   *         Matches preceding pattern zero or more times
-   +         Matches preceding pattern one or more times
-   ?         Matches preceding pattern zero or once only
-   |         Matches a pattern on either side of the |
-   ()        Saves a matched subexpression, which can be referenced
-             in the REGEX REPLACE operation. Additionally it is saved
-             by all regular expression-related commands, including
-             e.g. if( MATCHES ), in the variables CMAKE_MATCH_(0..9).
-
-``*``, ``+`` and ``?`` have higher precedence than concatenation.  | has lower
-precedence than concatenation.  This means that the regular expression
-"^ab+d$" matches "abbd" but not "ababd", and the regular expression
-"^(ab|cd)$" matches "ab" but not "abd".
-
-TIMESTAMP will write a string representation of the current date
-and/or time to the output variable.
-
-Should the command be unable to obtain a timestamp the output variable
-will be set to the empty string "".
-
-The optional UTC flag requests the current date/time representation to
-be in Coordinated Universal Time (UTC) rather than local time.
-
-The optional <format string> may contain the following format
-specifiers:
-
-::
-
-   %d        The day of the current month (01-31).
-   %H        The hour on a 24-hour clock (00-23).
-   %I        The hour on a 12-hour clock (01-12).
-   %j        The day of the current year (001-366).
-   %m        The month of the current year (01-12).
-   %M        The minute of the current hour (00-59).
-   %S        The second of the current minute.
-             60 represents a leap second. (00-60)
-   %U        The week number of the current year (00-53).
-   %w        The day of the current week. 0 is Sunday. (0-6)
-   %y        The last two digits of the current year (00-99)
-   %Y        The current year.
-
-Unknown format specifiers will be ignored and copied to the output
-as-is.
-
-If no explicit <format string> is given it will default to:
-
-::
-
-   %Y-%m-%dT%H:%M:%S    for local time.
-   %Y-%m-%dT%H:%M:%SZ   for UTC.
-
-MAKE_C_IDENTIFIER will write a string which can be used as an
-identifier in C.
-
-``GENEX_STRIP`` will strip any
-:manual:`generator expressions <cmake-generator-expressions(7)>` from the
-``input string`` and store the result in the ``output variable``.
-
-UUID creates a univerally unique identifier (aka GUID) as per RFC4122
-based on the hash of the combined values of <namespace>
-(which itself has to be a valid UUID) and <name>.
-The hash algorithm can be either ``MD5`` (Version 3 UUID) or
-``SHA1`` (Version 5 UUID).
-A UUID has the format ``xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx``
-where each `x` represents a lower case hexadecimal character.
-Where required an uppercase representation can be requested
-with the optional ``UPPER`` flag.
diff --git a/share/cmake-3.2/Help/command/subdirs.rst b/share/cmake-3.2/Help/command/subdirs.rst
deleted file mode 100644
index dee49f8..0000000
--- a/share/cmake-3.2/Help/command/subdirs.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-subdirs
--------
-
-Deprecated. Use the add_subdirectory() command instead.
-
-Add a list of subdirectories to the build.
-
-::
-
-  subdirs(dir1 dir2 ...[EXCLUDE_FROM_ALL exclude_dir1 exclude_dir2 ...]
-          [PREORDER] )
-
-Add a list of subdirectories to the build.  The add_subdirectory
-command should be used instead of subdirs although subdirs will still
-work.  This will cause any CMakeLists.txt files in the sub directories
-to be processed by CMake.  Any directories after the PREORDER flag are
-traversed first by makefile builds, the PREORDER flag has no effect on
-IDE projects.  Any directories after the EXCLUDE_FROM_ALL marker will
-not be included in the top level makefile or project file.  This is
-useful for having CMake create makefiles or projects for a set of
-examples in a project.  You would want CMake to generate makefiles or
-project files for all the examples at the same time, but you would not
-want them to show up in the top level project or be built each time
-make is run from the top.
diff --git a/share/cmake-3.2/Help/command/target_compile_definitions.rst b/share/cmake-3.2/Help/command/target_compile_definitions.rst
deleted file mode 100644
index 3c9fe87..0000000
--- a/share/cmake-3.2/Help/command/target_compile_definitions.rst
+++ /dev/null
@@ -1,28 +0,0 @@
-target_compile_definitions
---------------------------
-
-Add compile definitions to a target.
-
-::
-
-  target_compile_definitions(<target>
-    <INTERFACE|PUBLIC|PRIVATE> [items1...]
-    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
-
-Specify compile definitions to use when compiling a given <target.  The
-named ``<target>`` must have been created by a command such as
-:command:`add_executable` or :command:`add_library` and must not be an
-:ref:`Imported Target <Imported Targets>`.
-
-The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
-specify the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC``
-items will populate the :prop_tgt:`COMPILE_DEFINITIONS` property of
-``<target>``. ``PUBLIC`` and ``INTERFACE`` items will populate the
-:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS` property of ``<target>``.  The
-following arguments specify compile definitions.  Repeated calls for the
-same ``<target>`` append items in the order called.
-
-Arguments to ``target_compile_definitions`` may use "generator expressions"
-with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/command/target_compile_features.rst b/share/cmake-3.2/Help/command/target_compile_features.rst
deleted file mode 100644
index 29a8b41..0000000
--- a/share/cmake-3.2/Help/command/target_compile_features.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-target_compile_features
------------------------
-
-Add expected compiler features to a target.
-
-::
-
-  target_compile_features(<target> <PRIVATE|PUBLIC|INTERFACE> <feature> [...])
-
-Specify compiler features required when compiling a given target.  If the
-feature is not listed in the :variable:`CMAKE_C_COMPILE_FEATURES` variable
-or :variable:`CMAKE_CXX_COMPILE_FEATURES` variable,
-then an error will be reported by CMake.  If the use of the feature requires
-an additional compiler flag, such as ``-std=gnu++11``, the flag will be added
-automatically.
-
-The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
-specify the scope of the features.  ``PRIVATE`` and ``PUBLIC`` items will
-populate the :prop_tgt:`COMPILE_FEATURES` property of ``<target>``.
-``PUBLIC`` and ``INTERFACE`` items will populate the
-:prop_tgt:`INTERFACE_COMPILE_FEATURES` property of ``<target>``.  Repeated
-calls for the same ``<target>`` append items.
-
-The named ``<target>`` must have been created by a command such as
-:command:`add_executable` or :command:`add_library` and must not be
-an ``IMPORTED`` target.
-
-Arguments to ``target_compile_features`` may use "generator expressions"
-with the syntax ``$<...>``.
-See the :manual:`cmake-generator-expressions(7)` manual for available
-expressions.  See the :manual:`cmake-compile-features(7)` manual for
-information on compile features.
diff --git a/share/cmake-3.2/Help/command/target_compile_options.rst b/share/cmake-3.2/Help/command/target_compile_options.rst
deleted file mode 100644
index 3362c5d..0000000
--- a/share/cmake-3.2/Help/command/target_compile_options.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-target_compile_options
-----------------------
-
-Add compile options to a target.
-
-::
-
-  target_compile_options(<target> [BEFORE]
-    <INTERFACE|PUBLIC|PRIVATE> [items1...]
-    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
-
-Specify compile options to use when compiling a given target.  The
-named ``<target>`` must have been created by a command such as
-:command:`add_executable` or :command:`add_library` and must not be an
-:ref:`IMPORTED Target <Imported Targets>`.  If ``BEFORE`` is specified,
-the content will be prepended to the property instead of being appended.
-
-This command can be used to add any options, but
-alternative commands exist to add preprocessor definitions
-(:command:`target_compile_definitions` and :command:`add_definitions`) or
-include directories (:command:`target_include_directories` and
-:command:`include_directories`).  See documentation of the
-:prop_tgt:`directory <COMPILE_OPTIONS>` and
-:prop_tgt:` target <COMPILE_OPTIONS>` ``COMPILE_OPTIONS`` properties.
-
-The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
-specify the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC``
-items will populate the :prop_tgt:`COMPILE_OPTIONS` property of
-``<target>``.  ``PUBLIC`` and ``INTERFACE`` items will populate the
-:prop_tgt:`INTERFACE_COMPILE_OPTIONS` property of ``<target>``.  The
-following arguments specify compile options.  Repeated calls for the same
-``<target>`` append items in the order called.
-
-Arguments to ``target_compile_options`` may use "generator expressions"
-with the syntax ``$<...>``. See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/command/target_include_directories.rst b/share/cmake-3.2/Help/command/target_include_directories.rst
deleted file mode 100644
index 1d236ce..0000000
--- a/share/cmake-3.2/Help/command/target_include_directories.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-target_include_directories
---------------------------
-
-Add include directories to a target.
-
-::
-
-  target_include_directories(<target> [SYSTEM] [BEFORE]
-    <INTERFACE|PUBLIC|PRIVATE> [items1...]
-    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
-
-Specify include directories to use when compiling a given target.
-The named ``<target>`` must have been created by a command such
-as :command:`add_executable` or :command:`add_library` and must not be an
-:prop_tgt:`IMPORTED` target.
-
-If ``BEFORE`` is specified, the content will be prepended to the property
-instead of being appended.
-
-The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to specify
-the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC`` items will
-populate the :prop_tgt:`INCLUDE_DIRECTORIES` property of ``<target>``.
-``PUBLIC`` and ``INTERFACE`` items will populate the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`
-property of ``<target>``.  The following arguments specify include
-directories.
-
-Specified include directories may be absolute paths or relative paths.
-Repeated calls for the same <target> append items in the order called.  If
-``SYSTEM`` is specified, the compiler will be told the
-directories are meant as system include directories on some platforms
-(signalling this setting might achieve effects such as the compiler
-skipping warnings, or these fixed-install system files not being
-considered in dependency calculations - see compiler docs).  If ``SYSTEM``
-is used together with ``PUBLIC`` or ``INTERFACE``, the
-:prop_tgt:`INTERFACE_SYSTEM_INCLUDE_DIRECTORIES` target property will be
-populated with the specified directories.
-
-Arguments to ``target_include_directories`` may use "generator expressions"
-with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
-
-Include directories usage requirements commonly differ between the build-tree
-and the install-tree.  The ``BUILD_INTERFACE`` and ``INSTALL_INTERFACE``
-generator expressions can be used to describe separate usage requirements
-based on the usage location.  Relative paths are allowed within the
-``INSTALL_INTERFACE`` expression and are interpreted relative to the
-installation prefix.  For example:
-
-.. code-block:: cmake
-
-  target_include_directories(mylib PUBLIC
-    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include/mylib>
-    $<INSTALL_INTERFACE:include/mylib>  # <prefix>/include/mylib
-  )
-
-.. |INTERFACE_PROPERTY_LINK| replace:: :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`
-.. include:: /include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
diff --git a/share/cmake-3.2/Help/command/target_link_libraries.rst b/share/cmake-3.2/Help/command/target_link_libraries.rst
deleted file mode 100644
index e6a82b6..0000000
--- a/share/cmake-3.2/Help/command/target_link_libraries.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-target_link_libraries
----------------------
-
-Link a target to given libraries.
-
-::
-
-  target_link_libraries(<target> [item1 [item2 [...]]]
-                        [[debug|optimized|general] <item>] ...)
-
-Specify libraries or flags to use when linking a given target.  The
-named ``<target>`` must have been created in the current directory by a
-command such as :command:`add_executable` or :command:`add_library`.  The
-remaining arguments specify library names or flags.  Repeated calls for
-the same ``<target>`` append items in the order called.
-
-If a library name matches that of another target in the project a
-dependency will automatically be added in the build system to make sure
-the library being linked is up-to-date before the target links. Item names
-starting with ``-``, but not ``-l`` or ``-framework``, are treated as
-linker flags.  Note that such flags will be treated like any other library
-link item for purposes of transitive dependencies, so they are generally
-safe to specify only as private link items that will not propagate to
-dependents of ``<target>``.
-
-A ``debug``, ``optimized``, or ``general`` keyword indicates that the
-library immediately following it is to be used only for the
-corresponding build configuration.  The ``debug`` keyword corresponds to
-the Debug configuration (or to configurations named in the
-:prop_gbl:`DEBUG_CONFIGURATIONS` global property if it is set).  The
-``optimized`` keyword corresponds to all other configurations.  The
-``general`` keyword corresponds to all configurations, and is purely
-optional (assumed if omitted).  Higher granularity may be achieved for
-per-configuration rules by creating and linking to
-:ref:`IMPORTED library targets <Imported Targets>`.
-
-Library dependencies are transitive by default with this signature.
-When this target is linked into another target then the libraries
-linked to this target will appear on the link line for the other
-target too.  This transitive "link interface" is stored in the
-:prop_tgt:`INTERFACE_LINK_LIBRARIES` target property and may be overridden
-by setting the property directly.  When :policy:`CMP0022` is not set to
-``NEW``, transitive linking is built in but may be overridden by the
-:prop_tgt:`LINK_INTERFACE_LIBRARIES` property.  Calls to other signatures
-of this command may set the property making any libraries linked
-exclusively by this signature private.
-
-CMake will also propagate :ref:`usage requirements <Target Usage Requirements>`
-from linked library targets.  Usage requirements of dependencies affect
-compilation of sources in the ``<target>``.
-
-.. |INTERFACE_PROPERTY_LINK| replace:: :prop_tgt:`INTERFACE_LINK_LIBRARIES`
-.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
-
-If an ``<item>`` is a library in a Mac OX framework, the ``Headers``
-directory of the framework will also be processed as a
-:ref:`usage requirement <Target Usage Requirements>`.  This has the same
-effect as passing the framework directory as an include directory.
-
---------------------------------------------------------------------------
-
-::
-
-  target_link_libraries(<target>
-                      <PRIVATE|PUBLIC|INTERFACE> <lib> ...
-                      [<PRIVATE|PUBLIC|INTERFACE> <lib> ... ] ...])
-
-The ``PUBLIC``, ``PRIVATE`` and ``INTERFACE`` keywords can be used to
-specify both the link dependencies and the link interface in one command.
-Libraries and targets following ``PUBLIC`` are linked to, and are made
-part of the link interface.  Libraries and targets following ``PRIVATE``
-are linked to, but are not made part of the link interface.  Libraries
-following ``INTERFACE`` are appended to the link interface and are not
-used for linking ``<target>``.
-
---------------------------------------------------------------------------
-
-::
-
-  target_link_libraries(<target> LINK_INTERFACE_LIBRARIES
-                        [[debug|optimized|general] <lib>] ...)
-
-The ``LINK_INTERFACE_LIBRARIES`` mode appends the libraries to the
-:prop_tgt:`INTERFACE_LINK_LIBRARIES` target property instead of using them
-for linking.  If policy :policy:`CMP0022` is not ``NEW``, then this mode
-also appends libraries to the :prop_tgt:`LINK_INTERFACE_LIBRARIES` and its
-per-configuration equivalent.
-
-This signature is for compatibility only.  Prefer the ``INTERFACE`` mode
-instead.
-
-Libraries specified as ``debug`` are wrapped in a generator expression to
-correspond to debug builds.  If policy :policy:`CMP0022` is
-not ``NEW``, the libraries are also appended to the
-:prop_tgt:`LINK_INTERFACE_LIBRARIES_DEBUG <LINK_INTERFACE_LIBRARIES_<CONFIG>>`
-property (or to the properties corresponding to configurations listed in
-the :prop_gbl:`DEBUG_CONFIGURATIONS` global property if it is set).
-Libraries specified as ``optimized`` are appended to the
-:prop_tgt:`INTERFACE_LINK_LIBRARIES` property.  If policy :policy:`CMP0022`
-is not ``NEW``, they are also appended to the
-:prop_tgt:`LINK_INTERFACE_LIBRARIES` property.  Libraries specified as
-``general`` (or without any keyword) are treated as if specified for both
-``debug`` and ``optimized``.
-
---------------------------------------------------------------------------
-
-::
-
-  target_link_libraries(<target>
-                        <LINK_PRIVATE|LINK_PUBLIC>
-                          [[debug|optimized|general] <lib>] ...
-                        [<LINK_PRIVATE|LINK_PUBLIC>
-                          [[debug|optimized|general] <lib>] ...])
-
-The ``LINK_PUBLIC`` and ``LINK_PRIVATE`` modes can be used to specify both
-the link dependencies and the link interface in one command.
-
-This signature is for compatibility only.  Prefer the ``PUBLIC`` or
-``PRIVATE`` keywords instead.
-
-Libraries and targets following ``LINK_PUBLIC`` are linked to, and are
-made part of the :prop_tgt:`INTERFACE_LINK_LIBRARIES`.  If policy
-:policy:`CMP0022` is not ``NEW``, they are also made part of the
-:prop_tgt:`LINK_INTERFACE_LIBRARIES`.  Libraries and targets following
-``LINK_PRIVATE`` are linked to, but are not made part of the
-:prop_tgt:`INTERFACE_LINK_LIBRARIES` (or :prop_tgt:`LINK_INTERFACE_LIBRARIES`).
-
-The library dependency graph is normally acyclic (a DAG), but in the case
-of mutually-dependent ``STATIC`` libraries CMake allows the graph to
-contain cycles (strongly connected components).  When another target links
-to one of the libraries, CMake repeats the entire connected component.
-For example, the code
-
-.. code-block:: cmake
-
-  add_library(A STATIC a.c)
-  add_library(B STATIC b.c)
-  target_link_libraries(A B)
-  target_link_libraries(B A)
-  add_executable(main main.c)
-  target_link_libraries(main A)
-
-links ``main`` to ``A B A B``.  While one repetition is usually
-sufficient, pathological object file and symbol arrangements can require
-more.  One may handle such cases by manually repeating the component in
-the last ``target_link_libraries`` call.  However, if two archives are
-really so interdependent they should probably be combined into a single
-archive.
-
-Arguments to target_link_libraries may use "generator expressions"
-with the syntax ``$<...>``.  Note however, that generator expressions
-will not be used in OLD handling of :policy:`CMP0003` or :policy:`CMP0004`.
-See the :manual:`cmake-generator-expressions(7)` manual for available
-expressions.  See the :manual:`cmake-buildsystem(7)` manual for more on
-defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/command/target_sources.rst b/share/cmake-3.2/Help/command/target_sources.rst
deleted file mode 100644
index 832240a..0000000
--- a/share/cmake-3.2/Help/command/target_sources.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-target_sources
---------------
-
-Add sources to a target.
-
-::
-
-  target_sources(<target>
-    <INTERFACE|PUBLIC|PRIVATE> [items1...]
-    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
-
-Specify sources to use when compiling a given target.  The
-named ``<target>`` must have been created by a command such as
-:command:`add_executable` or :command:`add_library` and must not be an
-:ref:`IMPORTED Target <Imported Targets>`.
-
-The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
-specify the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC``
-items will populate the :prop_tgt:`SOURCES` property of
-``<target>``.  ``PUBLIC`` and ``INTERFACE`` items will populate the
-:prop_tgt:`INTERFACE_SOURCES` property of ``<target>``.  The
-following arguments specify sources.  Repeated calls for the same
-``<target>`` append items in the order called.
-
-Targets with :prop_tgt:`INTERFACE_SOURCES` may not be exported with the
-:command:`export` or :command:`install(EXPORT)` commands. This limitation may be
-lifted in a future version of CMake.
-
-Arguments to ``target_sources`` may use "generator expressions"
-with the syntax ``$<...>``. See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/command/try_compile.rst b/share/cmake-3.2/Help/command/try_compile.rst
deleted file mode 100644
index 9a70885..0000000
--- a/share/cmake-3.2/Help/command/try_compile.rst
+++ /dev/null
@@ -1,100 +0,0 @@
-try_compile
------------
-
-.. only:: html
-
-   .. contents::
-
-Try building some code.
-
-Try Compiling Whole Projects
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  try_compile(RESULT_VAR <bindir> <srcdir>
-              <projectName> [<targetName>] [CMAKE_FLAGS <flags>...]
-              [OUTPUT_VARIABLE <var>])
-
-Try building a project.  The success or failure of the ``try_compile``,
-i.e. ``TRUE`` or ``FALSE`` respectively, is returned in ``RESULT_VAR``.
-
-In this form, ``<srcdir>`` should contain a complete CMake project with a
-``CMakeLists.txt`` file and all sources.  The ``<bindir>`` and ``<srcdir>``
-will not be deleted after this command is run.  Specify ``<targetName>`` to
-build a specific target instead of the ``all`` or ``ALL_BUILD`` target.  See
-below for the meaning of other options.
-
-Try Compiling Source Files
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  try_compile(RESULT_VAR <bindir> <srcfile|SOURCES srcfile...>
-              [CMAKE_FLAGS <flags>...]
-              [COMPILE_DEFINITIONS <defs>...]
-              [LINK_LIBRARIES <libs>...]
-              [OUTPUT_VARIABLE <var>]
-              [COPY_FILE <fileName> [COPY_FILE_ERROR <var>]])
-
-Try building an executable from one or more source files.  The success or
-failure of the ``try_compile``, i.e. ``TRUE`` or ``FALSE`` respectively, is
-returned in ``RESULT_VAR``.
-
-In this form the user need only supply one or more source files that include a
-definition for ``main``.  CMake will create a ``CMakeLists.txt`` file to build
-the source(s) as an executable that looks something like this::
-
-  add_definitions(<expanded COMPILE_DEFINITIONS from caller>)
-  include_directories(${INCLUDE_DIRECTORIES})
-  link_directories(${LINK_DIRECTORIES})
-  add_executable(cmTryCompileExec <srcfile>...)
-  target_link_libraries(cmTryCompileExec ${LINK_LIBRARIES})
-
-The options are:
-
-``CMAKE_FLAGS <flags>...``
-  Specify flags of the form ``-DVAR:TYPE=VALUE`` to be passed to
-  the ``cmake`` command-line used to drive the test build.
-  The above example shows how values for variables
-  ``INCLUDE_DIRECTORIES``, ``LINK_DIRECTORIES``, and ``LINK_LIBRARIES``
-  are used.
-
-``COMPILE_DEFINITIONS <defs>...``
-  Specify ``-Ddefinition`` arguments to pass to ``add_definitions``
-  in the generated test project.
-
-``COPY_FILE <fileName>``
-  Copy the linked executable to the given ``<fileName>``.
-
-``COPY_FILE_ERROR <var>``
-  Use after ``COPY_FILE`` to capture into variable ``<var>`` any error
-  message encountered while trying to copy the file.
-
-``LINK_LIBRARIES <libs>...``
-  Specify libraries to be linked in the generated project.
-  The list of libraries may refer to system libraries and to
-  :ref:`Imported Targets <Imported Targets>` from the calling project.
-
-  If this option is specified, any ``-DLINK_LIBRARIES=...`` value
-  given to the ``CMAKE_FLAGS`` option will be ignored.
-
-``OUTPUT_VARIABLE <var>``
-  Store the output from the build process the given variable.
-
-In this version all files in ``<bindir>/CMakeFiles/CMakeTmp`` will be
-cleaned automatically.  For debugging, ``--debug-trycompile`` can be
-passed to ``cmake`` to avoid this clean.  However, multiple sequential
-``try_compile`` operations reuse this single output directory.  If you use
-``--debug-trycompile``, you can only debug one ``try_compile`` call at a time.
-The recommended procedure is to protect all ``try_compile`` calls in your
-project by ``if(NOT DEFINED RESULT_VAR)`` logic, configure with cmake
-all the way through once, then delete the cache entry associated with
-the try_compile call of interest, and then re-run cmake again with
-``--debug-trycompile``.
-
-Other Behavior Settings
-^^^^^^^^^^^^^^^^^^^^^^^
-
-Set the :variable:`CMAKE_TRY_COMPILE_CONFIGURATION` variable to choose
-a build configuration.
diff --git a/share/cmake-3.2/Help/command/try_run.rst b/share/cmake-3.2/Help/command/try_run.rst
deleted file mode 100644
index 43ee219..0000000
--- a/share/cmake-3.2/Help/command/try_run.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-try_run
--------
-
-.. only:: html
-
-   .. contents::
-
-Try compiling and then running some code.
-
-Try Compiling and Running Source Files
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-::
-
-  try_run(RUN_RESULT_VAR COMPILE_RESULT_VAR
-          bindir srcfile [CMAKE_FLAGS <flags>...]
-          [COMPILE_DEFINITIONS <defs>...]
-          [LINK_LIBRARIES <libs>...]
-          [COMPILE_OUTPUT_VARIABLE <var>]
-          [RUN_OUTPUT_VARIABLE <var>]
-          [OUTPUT_VARIABLE <var>]
-          [ARGS <args>...])
-
-Try compiling a ``<srcfile>``.  Returns ``TRUE`` or ``FALSE`` for success
-or failure in ``COMPILE_RESULT_VAR``.  If the compile succeeded, runs the
-executable and returns its exit code in ``RUN_RESULT_VAR``.  If the
-executable was built, but failed to run, then ``RUN_RESULT_VAR`` will be
-set to ``FAILED_TO_RUN``.  See the :command:`try_compile` command for
-information on how the test project is constructed to build the source file.
-
-The options are:
-
-``CMAKE_FLAGS <flags>...``
-  Specify flags of the form ``-DVAR:TYPE=VALUE`` to be passed to
-  the ``cmake`` command-line used to drive the test build.
-  The example in :command:`try_compile` shows how values for variables
-  ``INCLUDE_DIRECTORIES``, ``LINK_DIRECTORIES``, and ``LINK_LIBRARIES``
-  are used.
-
-``COMPILE_DEFINITIONS <defs>...``
-  Specify ``-Ddefinition`` arguments to pass to ``add_definitions``
-  in the generated test project.
-
-``COMPILE_OUTPUT_VARIABLE <var>``
-  Report the compile step build output in a given variable.
-
-``LINK_LIBRARIES <libs>...``
-  Specify libraries to be linked in the generated project.
-  The list of libraries may refer to system libraries and to
-  :ref:`Imported Targets <Imported Targets>` from the calling project.
-
-  If this option is specified, any ``-DLINK_LIBRARIES=...`` value
-  given to the ``CMAKE_FLAGS`` option will be ignored.
-
-``OUTPUT_VARIABLE <var>``
-  Report the compile build output and the output from running the executable
-  in the given variable.  This option exists for legacy reasons.  Prefer
-  ``COMPILE_OUTPUT_VARIABLE`` and ``RUN_OUTPUT_VARIABLE`` instead.
-
-``RUN_OUTPUT_VARIABLE <var>``
-  Report the output from running the executable in a given variable.
-
-Other Behavior Settings
-^^^^^^^^^^^^^^^^^^^^^^^
-
-Set the :variable:`CMAKE_TRY_COMPILE_CONFIGURATION` variable to choose
-a build configuration.
-
-Behavior when Cross Compiling
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-When cross compiling, the executable compiled in the first step
-usually cannot be run on the build host.  The ``try_run`` command checks
-the :variable:`CMAKE_CROSSCOMPILING` variable to detect whether CMake is in
-cross-compiling mode.  If that is the case, it will still try to compile
-the executable, but it will not try to run the executable.  Instead it
-will create cache variables which must be filled by the user or by
-presetting them in some CMake script file to the values the executable
-would have produced if it had been run on its actual target platform.
-These cache entries are:
-
-``<RUN_RESULT_VAR>``
-  Exit code if the executable were to be run on the target platform.
-
-``<RUN_RESULT_VAR>__TRYRUN_OUTPUT``
-  Output from stdout and stderr if the executable were to be run on
-  the target platform.  This is created only if the
-  ``RUN_OUTPUT_VARIABLE`` or ``OUTPUT_VARIABLE`` option was used.
-
-In order to make cross compiling your project easier, use ``try_run``
-only if really required.  If you use ``try_run``, use the
-``RUN_OUTPUT_VARIABLE`` or ``OUTPUT_VARIABLE`` options only if really
-required.  Using them will require that when cross-compiling, the cache
-variables will have to be set manually to the output of the executable.
-You can also "guard" the calls to ``try_run`` with an :command:`if`
-block checking the :variable:`CMAKE_CROSSCOMPILING` variable and
-provide an easy-to-preset alternative for this case.
diff --git a/share/cmake-3.2/Help/command/unset.rst b/share/cmake-3.2/Help/command/unset.rst
deleted file mode 100644
index d8f0dcd..0000000
--- a/share/cmake-3.2/Help/command/unset.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-unset
------
-
-Unset a variable, cache variable, or environment variable.
-
-::
-
-  unset(<variable> [CACHE | PARENT_SCOPE])
-
-Removes the specified variable causing it to become undefined.  If
-CACHE is present then the variable is removed from the cache instead
-of the current scope.
-
-If PARENT_SCOPE is present then the variable is removed from the scope
-above the current scope.  See the same option in the set() command for
-further details.
-
-<variable> can be an environment variable such as:
-
-::
-
-  unset(ENV{LD_LIBRARY_PATH})
-
-in which case the variable will be removed from the current
-environment.
diff --git a/share/cmake-3.2/Help/command/utility_source.rst b/share/cmake-3.2/Help/command/utility_source.rst
deleted file mode 100644
index 5122e52..0000000
--- a/share/cmake-3.2/Help/command/utility_source.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-utility_source
---------------
-
-Disallowed.  See CMake Policy :policy:`CMP0034`.
-
-Specify the source tree of a third-party utility.
-
-::
-
-  utility_source(cache_entry executable_name
-                 path_to_source [file1 file2 ...])
-
-When a third-party utility's source is included in the distribution,
-this command specifies its location and name.  The cache entry will
-not be set unless the path_to_source and all listed files exist.  It
-is assumed that the source tree of the utility will have been built
-before it is needed.
-
-When cross compiling CMake will print a warning if a utility_source()
-command is executed, because in many cases it is used to build an
-executable which is executed later on.  This doesn't work when cross
-compiling, since the executable can run only on their target platform.
-So in this case the cache entry has to be adjusted manually so it
-points to an executable which is runnable on the build host.
diff --git a/share/cmake-3.2/Help/command/variable_requires.rst b/share/cmake-3.2/Help/command/variable_requires.rst
deleted file mode 100644
index 831dd00..0000000
--- a/share/cmake-3.2/Help/command/variable_requires.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-variable_requires
------------------
-
-Disallowed.  See CMake Policy :policy:`CMP0035`.
-
-Use the if() command instead.
-
-Assert satisfaction of an option's required variables.
-
-::
-
-  variable_requires(TEST_VARIABLE RESULT_VARIABLE
-                    REQUIRED_VARIABLE1
-                    REQUIRED_VARIABLE2 ...)
-
-The first argument (TEST_VARIABLE) is the name of the variable to be
-tested, if that variable is false nothing else is done.  If
-TEST_VARIABLE is true, then the next argument (RESULT_VARIABLE) is a
-variable that is set to true if all the required variables are set.
-The rest of the arguments are variables that must be true or not set
-to NOTFOUND to avoid an error.  If any are not true, an error is
-reported.
diff --git a/share/cmake-3.2/Help/command/while.rst b/share/cmake-3.2/Help/command/while.rst
deleted file mode 100644
index 72c055d..0000000
--- a/share/cmake-3.2/Help/command/while.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-while
------
-
-Evaluate a group of commands while a condition is true
-
-::
-
-  while(condition)
-    COMMAND1(ARGS ...)
-    COMMAND2(ARGS ...)
-    ...
-  endwhile(condition)
-
-All commands between while and the matching endwhile are recorded
-without being invoked.  Once the endwhile is evaluated, the recorded
-list of commands is invoked as long as the condition is true.  The
-condition is evaluated using the same logic as the if command.
diff --git a/share/cmake-3.2/Help/command/write_file.rst b/share/cmake-3.2/Help/command/write_file.rst
deleted file mode 100644
index 015514b..0000000
--- a/share/cmake-3.2/Help/command/write_file.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-write_file
-----------
-
-Deprecated. Use the file(WRITE ) command instead.
-
-::
-
-  write_file(filename "message to write"... [APPEND])
-
-The first argument is the file name, the rest of the arguments are
-messages to write.  If the argument APPEND is specified, then the
-message will be appended.
-
-NOTE 1: file(WRITE ...  and file(APPEND ...  do exactly the same as
-this one but add some more functionality.
-
-NOTE 2: When using write_file the produced file cannot be used as an
-input to CMake (CONFIGURE_FILE, source file ...) because it will lead
-to an infinite loop.  Use configure_file if you want to generate input
-files to CMake.
diff --git a/share/cmake-3.2/Help/generator/Ninja.rst b/share/cmake-3.2/Help/generator/Ninja.rst
deleted file mode 100644
index 08f74fb..0000000
--- a/share/cmake-3.2/Help/generator/Ninja.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-Ninja
------
-
-Generates build.ninja files (experimental).
-
-A build.ninja file is generated into the build tree.  Recent versions
-of the ninja program can build the project through the "all" target.
-An "install" target is also provided.
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 6.rst b/share/cmake-3.2/Help/generator/Visual Studio 6.rst
deleted file mode 100644
index d619354..0000000
--- a/share/cmake-3.2/Help/generator/Visual Studio 6.rst
+++ /dev/null
@@ -1,4 +0,0 @@
-Visual Studio 6
----------------
-
-Generates Visual Studio 6 project files.
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 7 .NET 2003.rst b/share/cmake-3.2/Help/generator/Visual Studio 7 .NET 2003.rst
deleted file mode 100644
index 2034140..0000000
--- a/share/cmake-3.2/Help/generator/Visual Studio 7 .NET 2003.rst
+++ /dev/null
@@ -1,4 +0,0 @@
-Visual Studio 7 .NET 2003
--------------------------
-
-Generates Visual Studio .NET 2003 project files.
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 7.rst b/share/cmake-3.2/Help/generator/Visual Studio 7.rst
deleted file mode 100644
index d0eb719..0000000
--- a/share/cmake-3.2/Help/generator/Visual Studio 7.rst
+++ /dev/null
@@ -1,4 +0,0 @@
-Visual Studio 7
----------------
-
-Generates Visual Studio .NET 2002 project files.
diff --git a/share/cmake-3.2/Help/include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt b/share/cmake-3.2/Help/include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
deleted file mode 100644
index 33f7183..0000000
--- a/share/cmake-3.2/Help/include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-
-Note that it is not advisable to populate the ``INSTALL_INTERFACE`` of the
-|INTERFACE_PROPERTY_LINK| of a target with paths for dependencies.
-That would hard-code into installed packages the include directory paths
-for dependencies **as found on the machine the package was made on**.
-
-The ``INSTALL_INTERFACE`` of the |INTERFACE_PROPERTY_LINK| is only
-suitable for specifying the required include directories of the target itself,
-not its dependencies.
-
-That is, code like this is incorrect for targets which will be used to
-generate :manual:`cmake-packages(7)`:
-
-.. code-block:: cmake
-
-  target_include_directories(mylib INTERFACE
-    $<INSTALL_INTERFACE:${Boost_INCLUDE_DIRS};${OtherDep_INCLUDE_DIRS}>
-  )
-
-Dependencies must provide their own :ref:`IMPORTED targets <Imported Targets>`
-which have their own |INTERFACE_PROPERTY_LINK| populated
-appropriately.  Those :ref:`IMPORTED targets <Imported Targets>` may then be
-used with the :command:`target_link_libraries` command for ``mylib``.
-
-That way, when a consumer uses the installed package, the
-consumer will run the appropriate :command:`find_package` command to find
-the dependencies on their own machine and populate the
-:ref:`IMPORTED targets <Imported Targets>` with appropriate paths.  See
-:ref:`Creating Packages` for more.  Note that many modules currently shipped
-with CMake do not currently provide :ref:`IMPORTED targets <Imported Targets>`.
diff --git a/share/cmake-3.2/Help/include/INTERFACE_LINK_LIBRARIES_WARNING.txt b/share/cmake-3.2/Help/include/INTERFACE_LINK_LIBRARIES_WARNING.txt
deleted file mode 100644
index ceefa4d..0000000
--- a/share/cmake-3.2/Help/include/INTERFACE_LINK_LIBRARIES_WARNING.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-
-Note that it is not advisable to populate the
-|INTERFACE_PROPERTY_LINK| of a target with paths for dependencies.
-That would hard-code into installed packages the include directory paths
-for dependencies **as found on the machine the package was made on**.
-
-That is, code like this is incorrect for targets which will be used to
-generate :manual:`cmake-packages(7)`:
-
-.. code-block:: cmake
-
-  target_link_libraries(mylib INTERFACE
-    ${Boost_LIBRARIES};${OtherDep_LIBRARIES}
-  )
-
-Dependencies must provide their own :ref:`IMPORTED targets <Imported Targets>`
-which have their own :prop_tgt:`IMPORTED_LOCATION` populated
-appropriately.  That way, when a consumer uses the installed package, the
-consumer will run the appropriate :command:`find_package` command to find
-the dependencies on their own machine and populate the
-:ref:`IMPORTED targets <Imported Targets>` with appropriate paths.  See
-:ref:`Creating Packages` for more.  Note that many modules currently shipped
-with CMake do not currently provide :ref:`IMPORTED targets <Imported Targets>`.
diff --git a/share/cmake-3.2/Help/manual/LINKS.txt b/share/cmake-3.2/Help/manual/LINKS.txt
deleted file mode 100644
index 38fd151..0000000
--- a/share/cmake-3.2/Help/manual/LINKS.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-The following resources are available to get help using CMake:
-
-Home Page
- http://www.cmake.org
-
- The primary starting point for learning about CMake.
-
-Frequently Asked Questions
- http://www.cmake.org/Wiki/CMake_FAQ
-
- A Wiki is provided containing answers to frequently asked questions.
-
-Online Documentation
- http://www.cmake.org/documentation
-
- Links to available documentation may be found on this web page.
-
-Mailing List
- http://www.cmake.org/mailing-lists
-
- For help and discussion about using cmake, a mailing list is
- provided at cmake@cmake.org.  The list is member-post-only but one
- may sign up on the CMake web page.  Please first read the full
- documentation at http://www.cmake.org before posting questions to
- the list.
diff --git a/share/cmake-3.2/Help/manual/OPTIONS_BUILD.txt b/share/cmake-3.2/Help/manual/OPTIONS_BUILD.txt
deleted file mode 100644
index 363d0aa..0000000
--- a/share/cmake-3.2/Help/manual/OPTIONS_BUILD.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-``-C <initial-cache>``
- Pre-load a script to populate the cache.
-
- When cmake is first run in an empty build tree, it creates a
- CMakeCache.txt file and populates it with customizable settings for
- the project.  This option may be used to specify a file from which
- to load cache entries before the first pass through the project's
- cmake listfiles.  The loaded entries take priority over the
- project's default values.  The given file should be a CMake script
- containing SET commands that use the CACHE option, not a
- cache-format file.
-
-``-D <var>:<type>=<value>``
- Create a cmake cache entry.
-
- When cmake is first run in an empty build tree, it creates a
- CMakeCache.txt file and populates it with customizable settings for
- the project.  This option may be used to specify a setting that
- takes priority over the project's default value.  The option may be
- repeated for as many cache entries as desired.
-
-``-U <globbing_expr>``
- Remove matching entries from CMake cache.
-
- This option may be used to remove one or more variables from the
- CMakeCache.txt file, globbing expressions using * and ? are
- supported.  The option may be repeated for as many cache entries as
- desired.
-
- Use with care, you can make your CMakeCache.txt non-working.
-
-``-G <generator-name>``
- Specify a build system generator.
-
- CMake may support multiple native build systems on certain
- platforms.  A generator is responsible for generating a particular
- build system.  Possible generator names are specified in the
- Generators section.
-
-``-T <toolset-name>``
- Specify toolset name if supported by generator.
-
- Some CMake generators support a toolset name to be given to the
- native build system to choose a compiler.  This is supported only on
- specific generators:
-
- ::
-
-   Visual Studio >= 10
-   Xcode >= 3.0
-
- See native build system documentation for allowed toolset names.
-
-``-A <platform-name>``
- Specify platform name if supported by generator.
-
- Some CMake generators support a platform name to be given to the
- native build system to choose a compiler or SDK.  This is supported only on
- specific generators::
-
-   Visual Studio >= 8
-
- See native build system documentation for allowed platform names.
-
-``-Wno-dev``
- Suppress developer warnings.
-
- Suppress warnings that are meant for the author of the
- CMakeLists.txt files.
-
-``-Wdev``
- Enable developer warnings.
-
- Enable warnings that are meant for the author of the CMakeLists.txt
- files.
diff --git a/share/cmake-3.2/Help/manual/cmake-buildsystem.7.rst b/share/cmake-3.2/Help/manual/cmake-buildsystem.7.rst
deleted file mode 100644
index 002f2c2..0000000
--- a/share/cmake-3.2/Help/manual/cmake-buildsystem.7.rst
+++ /dev/null
@@ -1,893 +0,0 @@
-.. cmake-manual-description: CMake Buildsystem Reference
-
-cmake-buildsystem(7)
-********************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-A CMake-based buildsystem is organized as a set of high-level logical
-targets.  Each target corresponds to an executable or library, or
-is a custom target containing custom commands.  Dependencies between the
-targets are expressed in the buildsystem to determine the build order
-and the rules for regeneration in response to change.
-
-Binary Targets
-==============
-
-Executables and libraries are defined using the :command:`add_executable`
-and :command:`add_library` commands.  The resulting binary files have
-appropriate prefixes, suffixes and extensions for the platform targeted.
-Dependencies between binary targets are expressed using the
-:command:`target_link_libraries` command:
-
-.. code-block:: cmake
-
-  add_library(archive archive.cpp zip.cpp lzma.cpp)
-  add_executable(zipapp zipapp.cpp)
-  target_link_libraries(zipapp archive)
-
-``archive`` is defined as a static library -- an archive containing objects
-compiled from ``archive.cpp``, ``zip.cpp``, and ``lzma.cpp``.  ``zipapp``
-is defined as an executable formed by compiling and linking ``zipapp.cpp``.
-When linking the ``zipapp`` executable, the ``archive`` static library is
-linked in.
-
-Binary Executables
-------------------
-
-The :command:`add_executable` command defines an executable target:
-
-.. code-block:: cmake
-
-  add_executable(mytool mytool.cpp)
-
-Commands such as :command:`add_custom_command`, which generates rules to be
-run at build time can transparently use an :prop_tgt:`EXECUTABLE <TYPE>`
-target as a ``COMMAND`` executable.  The buildsystem rules will ensure that
-the executable is built before attempting to run the command.
-
-Binary Library Types
---------------------
-
-.. _`Normal Libraries`:
-
-Normal Libraries
-^^^^^^^^^^^^^^^^
-
-By default, the :command:`add_library` command defines a static library,
-unless a type is specified.  A type may be specified when using the command:
-
-.. code-block:: cmake
-
-  add_library(archive SHARED archive.cpp zip.cpp lzma.cpp)
-
-.. code-block:: cmake
-
-  add_library(archive STATIC archive.cpp zip.cpp lzma.cpp)
-
-The :variable:`BUILD_SHARED_LIBS` variable may be enabled to change the
-behavior of :command:`add_library` to build shared libraries by default.
-
-In the context of the buildsystem definition as a whole, it is largely
-irrelevant whether particular libraries are ``SHARED`` or ``STATIC`` --
-the commands, dependency specifications and other APIs work similarly
-regardless of the library type.  The ``MODULE`` library type is
-dissimilar in that it is generally not linked to -- it is not used in
-the right-hand-side of the :command:`target_link_libraries` command.
-It is a type which is loaded as a plugin using runtime techniques.
-
-.. code-block:: cmake
-
-  add_library(archive MODULE 7z.cpp)
-
-.. _`Object Libraries`:
-
-Object Libraries
-^^^^^^^^^^^^^^^^
-
-The ``OBJECT`` library type is also not linked to. It defines a non-archival
-collection of object files resulting from compiling the given source files.
-The object files collection can be used as source inputs to other targets:
-
-.. code-block:: cmake
-
-  add_library(archive OBJECT archive.cpp zip.cpp lzma.cpp)
-
-  add_library(archiveExtras STATIC $<TARGET_OBJECTS:archive> extras.cpp)
-
-  add_executable(test_exe $<TARGET_OBJECTS:archive> test.cpp)
-
-``OBJECT`` libraries may only be used locally as sources in a buildsystem --
-they may not be installed, exported, or used in the right hand side of
-:command:`target_link_libraries`.  They also may not be used as the ``TARGET``
-in a use of the :command:`add_custom_command(TARGET)` command signature.
-
-Although object libraries may not be named directly in calls to
-the :command:`target_link_libraries` command, they can be "linked"
-indirectly by using an :ref:`Interface Library <Interface Libraries>`
-whose :prop_tgt:`INTERFACE_SOURCES` target property is set to name
-``$<TARGET_OBJECTS:objlib>``.
-
-Build Specification and Usage Requirements
-==========================================
-
-The :command:`target_include_directories`, :command:`target_compile_definitions`
-and :command:`target_compile_options` commands specify the build specifications
-and the usage requirements of binary targets.  The commands populate the
-:prop_tgt:`INCLUDE_DIRECTORIES`, :prop_tgt:`COMPILE_DEFINITIONS` and
-:prop_tgt:`COMPILE_OPTIONS` target properties respectively, and/or the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`, :prop_tgt:`INTERFACE_COMPILE_DEFINITIONS`
-and :prop_tgt:`INTERFACE_COMPILE_OPTIONS` target properties.
-
-Each of the commands has a ``PRIVATE``, ``PUBLIC`` and ``INTERFACE`` mode.  The
-``PRIVATE`` mode populates only the non-``INTERFACE_`` variant of the target
-property and the ``INTERFACE`` mode populates only the ``INTERFACE_`` variants.
-The ``PUBLIC`` mode populates both variants of the repective target property.
-Each command may be invoked with multiple uses of each keyword:
-
-.. code-block:: cmake
-
-  target_compile_definitions(archive
-    PRIVATE BUILDING_WITH_LZMA
-    INTERFACE USING_ARCHIVE_LIB
-  )
-
-Note that usage requirements are not designed as a way to make downstreams
-use particular :prop_tgt:`COMPILE_OPTIONS` or
-:prop_tgt:`COMPILE_DEFINITIONS` etc for convenience only.  The contents of
-the properties must be **requirements**, not merely recommendations or
-convenience.
-
-Target Properties
------------------
-
-The contents of the :prop_tgt:`INCLUDE_DIRECTORIES`,
-:prop_tgt:`COMPILE_DEFINITIONS` and :prop_tgt:`COMPILE_OPTIONS` target
-properties are used appropriately when compiling the source files of a
-binary target.
-
-Entries in the :prop_tgt:`INCLUDE_DIRECTORIES` are added to the compile line
-with ``-I`` or ``-isystem`` prefixes and in the order of appearance in the
-property value.
-
-Entries in the :prop_tgt:`COMPILE_DEFINITIONS` are prefixed with ``-D`` or
-``/D`` and added to the compile line in an unspecified order.  The
-:prop_tgt:`DEFINE_SYMBOL` target property is also added as a compile
-definition as a special convenience case for ``SHARED`` and ``MODULE``
-library targets.
-
-Entries in the :prop_tgt:`COMPILE_OPTIONS` are escaped for the shell and added
-in the order of appearance in the property value.  Several compile options have
-special separate handling, such as :prop_tgt:`POSITION_INDEPENDENT_CODE`.
-
-The contents of the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
-:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS` and
-:prop_tgt:`INTERFACE_COMPILE_OPTIONS` target properties are
-*Usage Requirements* -- they specify content which consumers
-must use to correctly compile and link with the target they appear on.
-For any binary target, the contents of each ``INTERFACE_`` property on
-each target specified in a :command:`target_link_libraries` command is
-consumed:
-
-.. code-block:: cmake
-
-  set(srcs archive.cpp zip.cpp)
-  if (LZMA_FOUND)
-    list(APPEND srcs lzma.cpp)
-  endif()
-  add_library(archive SHARED ${srcs})
-  if (LZMA_FOUND)
-    # The archive library sources are compiled with -DBUILDING_WITH_LZMA
-    target_compile_definitions(archive PRIVATE BUILDING_WITH_LZMA)
-  endif()
-  target_compile_definitions(archive INTERFACE USING_ARCHIVE_LIB)
-
-  add_executable(consumer)
-  # Link consumer to archive and consume its usage requirements. The consumer
-  # executable sources are compiled with -DUSING_ARCHIVE_LIB.
-  target_link_libraries(consumer archive)
-
-Because it is common to require that the source directory and corresponding
-build directory are added to the :prop_tgt:`INCLUDE_DIRECTORIES`, the
-:variable:`CMAKE_INCLUDE_CURRENT_DIR` variable can be enabled to conveniently
-add the corresponding directories to the :prop_tgt:`INCLUDE_DIRECTORIES` of
-all targets.  The variable :variable:`CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE`
-can be enabled to add the corresponding directories to the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of all targets.  This makes use of
-targets in multiple different directories convenient through use of the
-:command:`target_link_libraries` command.
-
-
-.. _`Target Usage Requirements`:
-
-Transitive Usage Requirements
------------------------------
-
-The usage requirements of a target can transitively propagate to dependents.
-The :command:`target_link_libraries` command has ``PRIVATE``,
-``INTERFACE`` and ``PUBLIC`` keywords to control the propagation.
-
-.. code-block:: cmake
-
-  add_library(archive archive.cpp)
-  target_compile_definitions(archive INTERFACE USING_ARCHIVE_LIB)
-
-  add_library(serialization serialization.cpp)
-  target_compile_definitions(serialization INTERFACE USING_SERIALIZATION_LIB)
-
-  add_library(archiveExtras extras.cpp)
-  target_link_libraries(archiveExtras PUBLIC archive)
-  target_link_libraries(archiveExtras PRIVATE serialization)
-  # archiveExtras is compiled with -DUSING_ARCHIVE_LIB
-  # and -DUSING_SERIALIZATION_LIB
-
-  add_executable(consumer consumer.cpp)
-  # consumer is compiled with -DUSING_ARCHIVE_LIB
-  target_link_libraries(consumer archiveExtras)
-
-Because ``archive`` is a ``PUBLIC`` dependency of ``archiveExtras``, the
-usage requirements of it are propagated to ``consumer`` too.  Because
-``serialization`` is a ``PRIVATE`` dependency of ``archive``, the usage
-requirements of it are not propagated to ``consumer``.
-
-Generally, a dependency should be specified in a use of
-:command:`target_link_libraries` with the ``PRIVATE`` keyword if it is used by
-only the implementation of a library, and not in the header files.  If a
-dependency is additionally used in the header files of a library (e.g. for
-class inheritance), then it should be specified as a ``PUBLIC`` dependency.
-A dependency which is not used by the implementation of a library, but only by
-its headers should be specified as an ``INTERFACE`` dependency.  The
-:command:`target_link_libraries` command may be invoked with multiple uses of
-each keyword:
-
-.. code-block:: cmake
-
-  target_link_libraries(archiveExtras
-    PUBLIC archive
-    PRIVATE serialization
-  )
-
-Usage requirements are propagated by reading the ``INTERFACE_`` variants
-of target properties from dependencies and appending the values to the
-non-``INTERFACE_`` variants of the operand.  For example, the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of dependencies is read and
-appended to the :prop_tgt:`INCLUDE_DIRECTORIES` of the operand.  In cases
-where order is relevant and maintained, and the order resulting from the
-:command:`target_link_libraries` calls does not allow correct compilation,
-use of an appropriate command to set the property directly may update the
-order.
-
-For example, if the linked libraries for a target must be specified
-in the order ``lib1`` ``lib2`` ``lib3`` , but the include directories must
-be specified in the order ``lib3`` ``lib1`` ``lib2``:
-
-.. code-block:: cmake
-
-  target_link_libraries(myExe lib1 lib2 lib3)
-  target_include_directories(myExe
-    PRIVATE $<TARGET_PROPERTY:lib3,INTERFACE_INCLUDE_DIRECTORIES>)
-
-Note that care must be taken when specifying usage requirements for targets
-which will be exported for installation using the :command:`install(EXPORT)`
-command.  See :ref:`Creating Packages` for more.
-
-.. _`Compatible Interface Properties`:
-
-Compatible Interface Properties
--------------------------------
-
-Some target properties are required to be compatible between a target and
-the interface of each dependency.  For example, the
-:prop_tgt:`POSITION_INDEPENDENT_CODE` target property may specify a
-boolean value of whether a target should be compiled as
-position-independent-code, which has platform-specific consequences.
-A target may also specify the usage requirement
-:prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE` to communicate that
-consumers must be compiled as position-independent-code.
-
-.. code-block:: cmake
-
-  add_executable(exe1 exe1.cpp)
-  set_property(TARGET exe1 PROPERTY POSITION_INDEPENDENT_CODE ON)
-
-  add_library(lib1 SHARED lib1.cpp)
-  set_property(TARGET lib1 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
-
-  add_executable(exe2 exe2.cpp)
-  target_link_libraries(exe2 lib1)
-
-Here, both ``exe1`` and ``exe2`` will be compiled as position-independent-code.
-``lib1`` will also be compiled as position-independent-code because that is the
-default setting for ``SHARED`` libraries.  If dependencies have conflicting,
-non-compatible requirements :manual:`cmake(1)` issues a diagnostic:
-
-.. code-block:: cmake
-
-  add_library(lib1 SHARED lib1.cpp)
-  set_property(TARGET lib1 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
-
-  add_library(lib2 SHARED lib2.cpp)
-  set_property(TARGET lib2 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE OFF)
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 lib1)
-  set_property(TARGET exe1 PROPERTY POSITION_INDEPENDENT_CODE OFF)
-
-  add_executable(exe2 exe2.cpp)
-  target_link_libraries(exe2 lib1 lib2)
-
-The ``lib1`` requirement ``INTERFACE_POSITION_INDEPENDENT_CODE`` is not
-"compatible" with the ``POSITION_INDEPENDENT_CODE`` property of the ``exe1``
-target.  The library requires that consumers are built as
-position-independent-code, while the executable specifies to not built as
-position-independent-code, so a diagnostic is issued.
-
-The ``lib1`` and ``lib2`` requirements are not "compatible".  One of them
-requires that consumers are built as position-independent-code, while
-the other requires that consumers are not built as position-independent-code.
-Because ``exe2`` links to both and they are in conflict, a diagnostic is
-issued.
-
-To be "compatible", the :prop_tgt:`POSITION_INDEPENDENT_CODE` property,
-if set must be either the same, in a boolean sense, as the
-:prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE` property of all transitively
-specified dependencies on which that property is set.
-
-This property of "compatible interface requirement" may be extended to other
-properties by specifying the property in the content of the
-:prop_tgt:`COMPATIBLE_INTERFACE_BOOL` target property.  Each specified property
-must be compatible between the consuming target and the corresponding property
-with an ``INTERFACE_`` prefix from each dependency:
-
-.. code-block:: cmake
-
-  add_library(lib1Version2 SHARED lib1_v2.cpp)
-  set_property(TARGET lib1Version2 PROPERTY INTERFACE_CUSTOM_PROP ON)
-  set_property(TARGET lib1Version2 APPEND PROPERTY
-    COMPATIBLE_INTERFACE_BOOL CUSTOM_PROP
-  )
-
-  add_library(lib1Version3 SHARED lib1_v3.cpp)
-  set_property(TARGET lib1Version3 PROPERTY INTERFACE_CUSTOM_PROP OFF)
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 lib1Version2) # CUSTOM_PROP will be ON
-
-  add_executable(exe2 exe2.cpp)
-  target_link_libraries(exe2 lib1Version2 lib1Version3) # Diagnostic
-
-Non-boolean properties may also participate in "compatible interface"
-computations.  Properties specified in the
-:prop_tgt:`COMPATIBLE_INTERFACE_STRING`
-property must be either unspecified or compare to the same string among
-all transitively specified dependencies. This can be useful to ensure
-that multiple incompatible versions of a library are not linked together
-through transitive requirements of a target:
-
-.. code-block:: cmake
-
-  add_library(lib1Version2 SHARED lib1_v2.cpp)
-  set_property(TARGET lib1Version2 PROPERTY INTERFACE_LIB_VERSION 2)
-  set_property(TARGET lib1Version2 APPEND PROPERTY
-    COMPATIBLE_INTERFACE_STRING LIB_VERSION
-  )
-
-  add_library(lib1Version3 SHARED lib1_v3.cpp)
-  set_property(TARGET lib1Version3 PROPERTY INTERFACE_LIB_VERSION 3)
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 lib1Version2) # LIB_VERSION will be "2"
-
-  add_executable(exe2 exe2.cpp)
-  target_link_libraries(exe2 lib1Version2 lib1Version3) # Diagnostic
-
-The :prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MAX` target property specifies
-that content will be evaluated numerically and the maximum number among all
-specified will be calculated:
-
-.. code-block:: cmake
-
-  add_library(lib1Version2 SHARED lib1_v2.cpp)
-  set_property(TARGET lib1Version2 PROPERTY INTERFACE_CONTAINER_SIZE_REQUIRED 200)
-  set_property(TARGET lib1Version2 APPEND PROPERTY
-    COMPATIBLE_INTERFACE_NUMBER_MAX CONTAINER_SIZE_REQUIRED
-  )
-
-  add_library(lib1Version3 SHARED lib1_v3.cpp)
-  set_property(TARGET lib1Version2 PROPERTY INTERFACE_CONTAINER_SIZE_REQUIRED 1000)
-
-  add_executable(exe1 exe1.cpp)
-  # CONTAINER_SIZE_REQUIRED will be "200"
-  target_link_libraries(exe1 lib1Version2)
-
-  add_executable(exe2 exe2.cpp)
-  # CONTAINER_SIZE_REQUIRED will be "1000"
-  target_link_libraries(exe2 lib1Version2 lib1Version3)
-
-Similarly, the :prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MIN` may be used to
-calculate the numeric minimum value for a property from dependencies.
-
-Each calculated "compatible" property value may be read in the consumer at
-generate-time using generator expressions.
-
-Note that for each dependee, the set of properties specified in each
-compatible interface property must not intersect with the set specified in
-any of the other properties.
-
-Property Origin Debugging
--------------------------
-
-Because build specifications can be determined by dependencies, the lack of
-locality of code which creates a target and code which is responsible for
-setting build specifications may make the code more difficult to reason about.
-:manual:`cmake(1)` provides a debugging facility to print the origin of the
-contents of properties which may be determined by dependencies.  The properties
-which can be debugged are listed in the
-:variable:`CMAKE_DEBUG_TARGET_PROPERTIES` variable documentation:
-
-.. code-block:: cmake
-
-  set(CMAKE_DEBUG_TARGET_PROPERTIES
-    INCLUDE_DIRECTORIES
-    COMPILE_DEFINITIONS
-    POSITION_INDEPENDENT_CODE
-    CONTAINER_SIZE_REQUIRED
-    LIB_VERSION
-  )
-  add_executable(exe1 exe1.cpp)
-
-In the case of properties listed in :prop_tgt:`COMPATIBLE_INTERFACE_BOOL` or
-:prop_tgt:`COMPATIBLE_INTERFACE_STRING`, the debug output shows which target
-was responsible for setting the property, and which other dependencies also
-defined the property.  In the case of
-:prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MAX` and
-:prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MIN`, the debug output shows the
-value of the property from each dependency, and whether the value determines
-the new extreme.
-
-Build Specification with Generator Expressions
-----------------------------------------------
-
-Build specifications may use
-:manual:`generator expressions <cmake-generator-expressions(7)>` containing
-content which may be conditional or known only at generate-time.  For example,
-the calculated "compatible" value of a property may be read with the
-``TARGET_PROPERTY`` expression:
-
-.. code-block:: cmake
-
-  add_library(lib1Version2 SHARED lib1_v2.cpp)
-  set_property(TARGET lib1Version2 PROPERTY
-    INTERFACE_CONTAINER_SIZE_REQUIRED 200)
-  set_property(TARGET lib1Version2 APPEND PROPERTY
-    COMPATIBLE_INTERFACE_NUMBER_MAX CONTAINER_SIZE_REQUIRED
-  )
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 lib1Version2)
-  target_compile_definitions(exe1 PRIVATE
-      CONTAINER_SIZE=$<TARGET_PROPERTY:CONTAINER_SIZE_REQUIRED>
-  )
-
-In this case, the ``exe1`` source files will be compiled with
-``-DCONTAINER_SIZE=200``.
-
-Configuration determined build specifications may be conveniently set using
-the ``CONFIG`` generator expression.
-
-.. code-block:: cmake
-
-  target_compile_definitions(exe1 PRIVATE
-      $<$<CONFIG:Debug>:DEBUG_BUILD>
-  )
-
-The ``CONFIG`` parameter is compared case-insensitively with the configuration
-being built.  In the presence of :prop_tgt:`IMPORTED` targets, the content of
-:prop_tgt:`MAP_IMPORTED_CONFIG_DEBUG <MAP_IMPORTED_CONFIG_<CONFIG>>` is also
-accounted for by this expression.
-
-Some buildsystems generated by :manual:`cmake(1)` have a predetermined
-build-configuration set in the :variable:`CMAKE_BUILD_TYPE` variable.  The
-buildsystem for the IDEs such as Visual Studio and Xcode are generated
-independent of the build-configuration, and the actual build configuration
-is not known until build-time.  Therefore, code such as
-
-.. code-block:: cmake
-
-  string(TOLOWER ${CMAKE_BUILD_TYPE} _type)
-  if (_type STREQUAL debug)
-    target_compile_definitions(exe1 PRIVATE DEBUG_BUILD)
-  endif()
-
-may appear to work for ``Makefile`` based and ``Ninja`` generators, but is not
-portable to IDE generators.  Additionally, the :prop_tgt:`IMPORTED`
-configuration-mappings are not accounted for with code like this, so it should
-be avoided.
-
-The unary ``TARGET_PROPERTY`` generator expression and the ``TARGET_POLICY``
-generator expression are evaluated with the consuming target context.  This
-means that a usage requirement specification may be evaluated differently based
-on the consumer:
-
-.. code-block:: cmake
-
-  add_library(lib1 lib1.cpp)
-  target_compile_definitions(lib1 INTERFACE
-    $<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,EXECUTABLE>:LIB1_WITH_EXE>
-    $<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,SHARED_LIBRARY>:LIB1_WITH_SHARED_LIB>
-    $<$<TARGET_POLICY:CMP0041>:CONSUMER_CMP0041_NEW>
-  )
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 lib1)
-
-  cmake_policy(SET CMP0041 NEW)
-
-  add_library(shared_lib shared_lib.cpp)
-  target_link_libraries(shared_lib lib1)
-
-The ``exe1`` executable will be compiled with ``-DLIB1_WITH_EXE``, while the
-``shared_lib`` shared library will be compiled with ``-DLIB1_WITH_SHARED_LIB``
-and ``-DCONSUMER_CMP0041_NEW``, because policy :policy:`CMP0041` is
-``NEW`` at the point where the ``shared_lib`` target is created.
-
-The ``BUILD_INTERFACE`` expression wraps requirements which are only used when
-consumed from a target in the same buildsystem, or when consumed from a target
-exported to the build directory using the :command:`export` command.  The
-``INSTALL_INTERFACE`` expression wraps requirements which are only used when
-consumed from a target which has been installed and exported with the
-:command:`install(EXPORT)` command:
-
-.. code-block:: cmake
-
-  add_library(ClimbingStats climbingstats.cpp)
-  target_compile_definitions(ClimbingStats INTERFACE
-    $<BUILD_INTERFACE:ClimbingStats_FROM_BUILD_LOCATION>
-    $<INSTALL_INTERFACE:ClimbingStats_FROM_INSTALLED_LOCATION>
-  )
-  install(TARGETS ClimbingStats EXPORT libExport ${InstallArgs})
-  install(EXPORT libExport NAMESPACE Upstream::
-          DESTINATION lib/cmake/ClimbingStats)
-  export(EXPORT libExport NAMESPACE Upstream::)
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 ClimbingStats)
-
-In this case, the ``exe1`` executable will be compiled with
-``-DClimbingStats_FROM_BUILD_LOCATION``.  The exporting commands generate
-:prop_tgt:`IMPORTED` targets with either the ``INSTALL_INTERFACE`` or the
-``BUILD_INTERFACE`` omitted, and the ``*_INTERFACE`` marker stripped away.
-A separate project consuming the ``ClimbingStats`` package would contain:
-
-.. code-block:: cmake
-
-  find_package(ClimbingStats REQUIRED)
-
-  add_executable(Downstream main.cpp)
-  target_link_libraries(Downstream Upstream::ClimbingStats)
-
-Depending on whether the ``ClimbingStats`` package was used from the build
-location or the install location, the ``Downstream`` target would be compiled
-with either ``-DClimbingStats_FROM_BUILD_LOCATION`` or
-``-DClimbingStats_FROM_INSTALL_LOCATION``.  For more about packages and
-exporting see the :manual:`cmake-packages(7)` manual.
-
-.. _`Include Directories and Usage Requirements`:
-
-Include Directories and Usage Requirements
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Include directories require some special consideration when specified as usage
-requirements and when used with generator expressions.  The
-:command:`target_include_directories` command accepts both relative and
-absolute include directories:
-
-.. code-block:: cmake
-
-  add_library(lib1 lib1.cpp)
-  target_include_directories(lib1 PRIVATE
-    /absolute/path
-    relative/path
-  )
-
-Relative paths are interpreted relative to the source directory where the
-command appears.  Relative paths are not allowed in the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of :prop_tgt:`IMPORTED` targets.
-
-In cases where a non-trivial generator expression is used, the
-``INSTALL_PREFIX`` expression may be used within the argument of an
-``INSTALL_INTERFACE`` expression.  It is a replacement marker which
-expands to the installation prefix when imported by a consuming project.
-
-Include directories usage requirements commonly differ between the build-tree
-and the install-tree.  The ``BUILD_INTERFACE`` and ``INSTALL_INTERFACE``
-generator expressions can be used to describe separate usage requirements
-based on the usage location.  Relative paths are allowed within the
-``INSTALL_INTERFACE`` expression and are interpreted relative to the
-installation prefix.  For example:
-
-.. code-block:: cmake
-
-  add_library(ClimbingStats climbingstats.cpp)
-  target_include_directories(ClimbingStats INTERFACE
-    $<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}/generated>
-    $<INSTALL_INTERFACE:/absolute/path>
-    $<INSTALL_INTERFACE:relative/path>
-    $<INSTALL_INTERFACE:$<INSTALL_PREFIX>/$<CONFIG>/generated>
-  )
-
-Two convenience APIs are provided relating to include directories usage
-requirements.  The :variable:`CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE` variable
-may be enabled, with an equivalent effect to:
-
-.. code-block:: cmake
-
-  set_property(TARGET tgt APPEND PROPERTY
-    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
-  )
-
-for each target affected.  The convenience for installed targets is
-an ``INCLUDES DESTINATION`` component with the :command:`install(TARGETS)`
-command:
-
-.. code-block:: cmake
-
-  install(TARGETS foo bar bat EXPORT tgts ${dest_args}
-    INCLUDES DESTINATION include
-  )
-  install(EXPORT tgts ${other_args})
-  install(FILES ${headers} DESTINATION include)
-
-This is equivalent to appending ``${CMAKE_INSTALL_PREFIX}/include`` to the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of each of the installed
-:prop_tgt:`IMPORTED` targets when generated by :command:`install(EXPORT)`.
-
-When the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of an
-:ref:`imported target <Imported targets>` is consumed, the entries in the
-property are treated as ``SYSTEM`` include directories, as if they were
-listed in the :prop_tgt:`INTERFACE_SYSTEM_INCLUDE_DIRECTORIES` of the
-dependency. This can result in omission of compiler warnings for headers
-found in those directories.  This behavior for :ref:`imported targets` may
-be controlled with the :prop_tgt:`NO_SYSTEM_FROM_IMPORTED` target property.
-
-If a binary target is linked transitively to a Mac OX framework, the
-``Headers`` directory of the framework is also treated as a usage requirement.
-This has the same effect as passing the framework directory as an include
-directory.
-
-Link Libraries and Generator Expressions
-----------------------------------------
-
-Like build specifications, :prop_tgt:`link libraries <LINK_LIBRARIES>` may be
-specified with generator expression conditions.  However, as consumption of
-usage requirements is based on collection from linked dependencies, there is
-an additional limitation that the link dependencies must form a "directed
-acyclic graph".  That is, if linking to a target is dependent on the value of
-a target property, that target property may not be dependent on the linked
-dependencies:
-
-.. code-block:: cmake
-
-  add_library(lib1 lib1.cpp)
-  add_library(lib2 lib2.cpp)
-  target_link_libraries(lib1 PUBLIC
-    $<$<TARGET_PROPERTY:POSITION_INDEPENDENT_CODE>:lib2>
-  )
-  add_library(lib3 lib3.cpp)
-  set_property(TARGET lib3 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 lib1 lib3)
-
-As the value of the :prop_tgt:`POSITION_INDEPENDENT_CODE` property of
-the ``exe1`` target is dependent on the linked libraries (``lib3``), and the
-edge of linking ``exe1`` is determined by the same
-:prop_tgt:`POSITION_INDEPENDENT_CODE` property, the dependency graph above
-contains a cycle.  :manual:`cmake(1)` issues a diagnostic in this case.
-
-Output Files
-------------
-
-The buildsystem targets created by the :command:`add_library` and
-:command:`add_executable` commands create rules to create binary outputs.
-The exact output location of the binaries can only be determined at
-generate-time because it can depend on the build-configuration and the
-link-language of linked dependencies etc.  ``TARGET_FILE``,
-``TARGET_LINKER_FILE`` and related expressions can be used to access the
-name and location of generated binaries.  These expressions do not work
-for ``OBJECT`` libraries however, as there is no single file generated
-by such libraries which is relevant to the expressions.
-
-Directory-Scoped Commands
--------------------------
-
-The :command:`target_include_directories`,
-:command:`target_compile_definitions` and
-:command:`target_compile_options` commands have an effect on only one
-target at a time.  The commands :command:`add_definitions`,
-:command:`add_compile_options` and :command:`include_directories` have
-a similar function, but operate at directory scope instead of target
-scope for convenience.
-
-Pseudo Targets
-==============
-
-Some target types do not represent outputs of the buildsystem, but only inputs
-such as external dependencies, aliases or other non-build artifacts.  Pseudo
-targets are not represented in the generated buildsystem.
-
-.. _`Imported Targets`:
-
-Imported Targets
-----------------
-
-An :prop_tgt:`IMPORTED` target represents a pre-existing dependency.  Usually
-such targets are defined by an upstream package and should be treated as
-immutable.  It is not possible to use an :prop_tgt:`IMPORTED` target in the
-left-hand-side of the :command:`target_compile_definitions`,
-:command:`target_include_directories`, :command:`target_compile_options` or
-:command:`target_link_libraries` commands, as that would be an attempt to
-modify it.  :prop_tgt:`IMPORTED` targets are designed to be used only in the
-right-hand-side of those commands.
-
-:prop_tgt:`IMPORTED` targets may have the same usage requirement properties
-populated as binary targets, such as
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
-:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS`,
-:prop_tgt:`INTERFACE_COMPILE_OPTIONS`,
-:prop_tgt:`INTERFACE_LINK_LIBRARIES`, and
-:prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE`.
-
-The :prop_tgt:`LOCATION` may also be read from an IMPORTED target, though there
-is rarely reason to do so.  Commands such as :command:`add_custom_command` can
-transparently use an :prop_tgt:`IMPORTED` :prop_tgt:`EXECUTABLE <TYPE>` target
-as a ``COMMAND`` executable.
-
-The scope of the definition of an :prop_tgt:`IMPORTED` target is the directory
-where it was defined.  It may be accessed and used from subdirectories, but
-not from parent directories or sibling directories.  The scope is similar to
-the scope of a cmake variable.
-
-It is also possible to define a ``GLOBAL`` :prop_tgt:`IMPORTED` target which is
-accessible globally in the buildsystem.
-
-See the :manual:`cmake-packages(7)` manual for more on creating packages
-with :prop_tgt:`IMPORTED` targets.
-
-.. _`Alias Targets`:
-
-Alias Targets
--------------
-
-An ``ALIAS`` target is a name which may be used interchangably with
-a binary target name in read-only contexts.  A primary use-case for ``ALIAS``
-targets is for example or unit test executables accompanying a library, which
-may be part of the same buildsystem or built separately based on user
-configuration.
-
-.. code-block:: cmake
-
-  add_library(lib1 lib1.cpp)
-  install(TARGETS lib1 EXPORT lib1Export ${dest_args})
-  install(EXPORT lib1Export NAMESPACE Upstream:: ${other_args})
-
-  add_library(Upstream::lib1 ALIAS lib1)
-
-In another directory, we can link unconditionally to the ``Upstream::lib1``
-target, which may be an :prop_tgt:`IMPORTED` target from a package, or an
-``ALIAS`` target if built as part of the same buildsystem.
-
-.. code-block:: cmake
-
-  if (NOT TARGET Upstream::lib1)
-    find_package(lib1 REQUIRED)
-  endif()
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 Upstream::lib1)
-
-``ALIAS`` targets are not mutable, installable or exportable.  They are
-entirely local to the buildsystem description.  A name can be tested for
-whether it is an ``ALIAS`` name by reading the :prop_tgt:`ALIASED_TARGET`
-property from it:
-
-.. code-block:: cmake
-
-  get_target_property(_aliased Upstream::lib1 ALIASED_TARGET)
-  if(_aliased)
-    message(STATUS "The name Upstream::lib1 is an ALIAS for ${_aliased}.")
-  endif()
-
-.. _`Interface Libraries`:
-
-Interface Libraries
--------------------
-
-An ``INTERFACE`` target has no :prop_tgt:`LOCATION` and is mutable, but is
-otherwise similar to an :prop_tgt:`IMPORTED` target.
-
-It may specify usage requirements such as
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
-:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS`,
-:prop_tgt:`INTERFACE_COMPILE_OPTIONS`,
-:prop_tgt:`INTERFACE_LINK_LIBRARIES`, and
-:prop_tgt:`INTERFACE_SOURCES`,
-:prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE`.
-Only the ``INTERFACE`` modes of the :command:`target_include_directories`,
-:command:`target_compile_definitions`, :command:`target_compile_options`,
-:command:`target_sources`, and :command:`target_link_libraries` commands
-may be used with ``INTERFACE`` libraries.
-
-A primary use-case for ``INTERFACE`` libraries is header-only libraries.
-
-.. code-block:: cmake
-
-  add_library(Eigen INTERFACE)
-  target_include_directories(Eigen INTERFACE
-    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
-    $<INSTALL_INTERFACE:include/Eigen>
-  )
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 Eigen)
-
-Here, the usage requirements from the ``Eigen`` target are consumed and used
-when compiling, but it has no effect on linking.
-
-Another use-case is to employ an entirely target-focussed design for usage
-requirements:
-
-.. code-block:: cmake
-
-  add_library(pic_on INTERFACE)
-  set_property(TARGET pic_on PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
-  add_library(pic_off INTERFACE)
-  set_property(TARGET pic_off PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE OFF)
-
-  add_library(enable_rtti INTERFACE)
-  target_compile_options(enable_rtti INTERFACE
-    $<$<OR:$<COMPILER_ID:GNU>,$<COMPILER_ID:Clang>>:-rtti>
-  )
-
-  add_executable(exe1 exe1.cpp)
-  target_link_libraries(exe1 pic_on enable_rtti)
-
-This way, the build specification of ``exe1`` is expressed entirely as linked
-targets, and the complexity of compiler-specific flags is encapsulated in an
-``INTERFACE`` library target.
-
-The properties permitted to be set on or read from an ``INTERFACE`` library
-are:
-
-* Properties matching ``INTERFACE_*``
-* Built-in properties matching ``COMPATIBLE_INTERFACE_*``
-* ``EXPORT_NAME``
-* ``IMPORTED``
-* ``NAME``
-* Properties matching ``MAP_IMPORTED_CONFIG_*``
-
-``INTERFACE`` libraries may be installed and exported.  Any content they refer
-to must be installed separately:
-
-.. code-block:: cmake
-
-  add_library(Eigen INTERFACE)
-  target_include_directories(Eigen INTERFACE
-    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
-    $<INSTALL_INTERFACE:include/Eigen>
-  )
-
-  install(TARGETS Eigen EXPORT eigenExport)
-  install(EXPORT eigenExport NAMESPACE Upstream::
-    DESTINATION lib/cmake/Eigen
-  )
-  install(FILES
-      ${CMAKE_CURRENT_SOURCE_DIR}/src/eigen.h
-      ${CMAKE_CURRENT_SOURCE_DIR}/src/vector.h
-      ${CMAKE_CURRENT_SOURCE_DIR}/src/matrix.h
-    DESTINATION include/Eigen
-  )
diff --git a/share/cmake-3.2/Help/manual/cmake-commands.7.rst b/share/cmake-3.2/Help/manual/cmake-commands.7.rst
deleted file mode 100644
index c916f77..0000000
--- a/share/cmake-3.2/Help/manual/cmake-commands.7.rst
+++ /dev/null
@@ -1,154 +0,0 @@
-.. cmake-manual-description: CMake Language Command Reference
-
-cmake-commands(7)
-*****************
-
-.. only:: html
-
-   .. contents::
-
-Normal Commands
-===============
-
-These commands may be used freely in CMake projects.
-
-.. toctree::
-   :maxdepth: 1
-
-   /command/add_compile_options
-   /command/add_custom_command
-   /command/add_custom_target
-   /command/add_definitions
-   /command/add_dependencies
-   /command/add_executable
-   /command/add_library
-   /command/add_subdirectory
-   /command/add_test
-   /command/aux_source_directory
-   /command/break
-   /command/build_command
-   /command/cmake_host_system_information
-   /command/cmake_minimum_required
-   /command/cmake_policy
-   /command/configure_file
-   /command/continue
-   /command/create_test_sourcelist
-   /command/define_property
-   /command/elseif
-   /command/else
-   /command/enable_language
-   /command/enable_testing
-   /command/endforeach
-   /command/endfunction
-   /command/endif
-   /command/endmacro
-   /command/endwhile
-   /command/execute_process
-   /command/export
-   /command/file
-   /command/find_file
-   /command/find_library
-   /command/find_package
-   /command/find_path
-   /command/find_program
-   /command/fltk_wrap_ui
-   /command/foreach
-   /command/function
-   /command/get_cmake_property
-   /command/get_directory_property
-   /command/get_filename_component
-   /command/get_property
-   /command/get_source_file_property
-   /command/get_target_property
-   /command/get_test_property
-   /command/if
-   /command/include_directories
-   /command/include_external_msproject
-   /command/include_regular_expression
-   /command/include
-   /command/install
-   /command/link_directories
-   /command/link_libraries
-   /command/list
-   /command/load_cache
-   /command/load_command
-   /command/macro
-   /command/mark_as_advanced
-   /command/math
-   /command/message
-   /command/option
-   /command/project
-   /command/qt_wrap_cpp
-   /command/qt_wrap_ui
-   /command/remove_definitions
-   /command/return
-   /command/separate_arguments
-   /command/set_directory_properties
-   /command/set_property
-   /command/set
-   /command/set_source_files_properties
-   /command/set_target_properties
-   /command/set_tests_properties
-   /command/site_name
-   /command/source_group
-   /command/string
-   /command/target_compile_definitions
-   /command/target_compile_features
-   /command/target_compile_options
-   /command/target_include_directories
-   /command/target_link_libraries
-   /command/target_sources
-   /command/try_compile
-   /command/try_run
-   /command/unset
-   /command/variable_watch
-   /command/while
-
-Deprecated Commands
-===================
-
-These commands are available only for compatibility with older
-versions of CMake.  Do not use them in new code.
-
-.. toctree::
-   :maxdepth: 1
-
-   /command/build_name
-   /command/exec_program
-   /command/export_library_dependencies
-   /command/install_files
-   /command/install_programs
-   /command/install_targets
-   /command/make_directory
-   /command/output_required_files
-   /command/remove
-   /command/subdir_depends
-   /command/subdirs
-   /command/use_mangled_mesa
-   /command/utility_source
-   /command/variable_requires
-   /command/write_file
-
-.. _`CTest Commands`:
-
-CTest Commands
-==============
-
-These commands are available only in ctest scripts.
-
-.. toctree::
-   :maxdepth: 1
-
-   /command/ctest_build
-   /command/ctest_configure
-   /command/ctest_coverage
-   /command/ctest_empty_binary_directory
-   /command/ctest_memcheck
-   /command/ctest_read_custom_files
-   /command/ctest_run_script
-   /command/ctest_sleep
-   /command/ctest_start
-   /command/ctest_submit
-   /command/ctest_test
-   /command/ctest_update
-   /command/ctest_upload
diff --git a/share/cmake-3.2/Help/manual/cmake-compile-features.7.rst b/share/cmake-3.2/Help/manual/cmake-compile-features.7.rst
deleted file mode 100644
index 7a6c249..0000000
--- a/share/cmake-3.2/Help/manual/cmake-compile-features.7.rst
+++ /dev/null
@@ -1,297 +0,0 @@
-.. cmake-manual-description: CMake Compile Features Reference
-
-cmake-compile-features(7)
-*************************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-Project source code may depend on, or be conditional on, the availability
-of certain features of the compiler.  There are three use-cases which arise:
-`Compile Feature Requirements`_, `Optional Compile Features`_
-and `Conditional Compilation Options`_.
-
-While features are typically specified in programming language standards,
-CMake provides a primary user interface based on granular handling of
-the features, not the language standard that introduced the feature.
-
-The :prop_gbl:`CMAKE_C_KNOWN_FEATURES` and
-:prop_gbl:`CMAKE_CXX_KNOWN_FEATURES` global properties contain all the
-features known to CMake, regardless of compiler support for the feature.
-The :variable:`CMAKE_C_COMPILE_FEATURES` and
-:variable:`CMAKE_CXX_COMPILE_FEATURES` variables contain all features
-CMake knows are known to the compiler, regardless of language standard
-or compile flags needed to use them.
-
-Features known to CMake are named mostly following the same convention
-as the Clang feature test macros.  The are some exceptions, such as
-CMake using ``cxx_final`` and ``cxx_override`` instead of the single
-``cxx_override_control`` used by Clang.
-
-Compile Feature Requirements
-============================
-
-Compile feature requirements may be specified with the
-:command:`target_compile_features` command.  For example, if a target must
-be compiled with compiler support for the
-:prop_gbl:`cxx_constexpr <CMAKE_CXX_KNOWN_FEATURES>` feature:
-
-.. code-block:: cmake
-
-  add_library(mylib requires_constexpr.cpp)
-  target_compile_features(mylib PRIVATE cxx_constexpr)
-
-In processing the requirement for the ``cxx_constexpr`` feature,
-:manual:`cmake(1)` will ensure that the in-use C++ compiler is capable
-of the feature, and will add any necessary flags such as ``-std=gnu++11``
-to the compile lines of C++ files in the ``mylib`` target.  A
-``FATAL_ERROR`` is issued if the compiler is not capable of the
-feature.
-
-The exact compile flags and language standard are deliberately not part
-of the user interface for this use-case.  CMake will compute the
-appropriate compile flags to use by considering the features specified
-for each target.
-
-Such compile flags are added even if the compiler supports the
-particular feature without the flag. For example, the GNU compiler
-supports variadic templates (with a warning) even if ``-std=gnu++98`` is
-used.  CMake adds the ``-std=gnu++11`` flag if ``cxx_variadic_templates``
-is specified as a requirement.
-
-In the above example, ``mylib`` requires ``cxx_constexpr`` when it
-is built itself, but consumers of ``mylib`` are not required to use a
-compiler which supports ``cxx_constexpr``.  If the interface of
-``mylib`` does require the ``cxx_constexpr`` feature (or any other
-known feature), that may be specified with the ``PUBLIC`` or
-``INTERFACE`` signatures of :command:`target_compile_features`:
-
-.. code-block:: cmake
-
-  add_library(mylib requires_constexpr.cpp)
-  # cxx_constexpr is a usage-requirement
-  target_compile_features(mylib PUBLIC cxx_constexpr)
-
-  # main.cpp will be compiled with -std=gnu++11 on GNU for cxx_constexpr.
-  add_executable(myexe main.cpp)
-  target_link_libraries(myexe mylib)
-
-Feature requirements are evaluated transitively by consuming the link
-implementation.  See :manual:`cmake-buildsystem(7)` for more on
-transitive behavior of build properties and usage requirements.
-
-Because the :prop_tgt:`CXX_EXTENSIONS` target property is ``ON`` by default,
-CMake uses extended variants of language dialects by default, such as
-``-std=gnu++11`` instead of ``-std=c++11``.  That target property may be
-set to ``OFF`` to use the non-extended variant of the dialect flag.  Note
-that because most compilers enable extensions by default, this could
-expose cross-platform bugs in user code or in the headers of third-party
-dependencies.
-
-Optional Compile Features
-=========================
-
-Compile features may be preferred if available, without creating a hard
-requirement.  For example, a library may provides alternative
-implementations depending on whether the ``cxx_variadic_templates``
-feature is available:
-
-.. code-block:: c++
-
-  #if Foo_COMPILER_CXX_VARIADIC_TEMPLATES
-  template<int I, int... Is>
-  struct Interface;
-
-  template<int I>
-  struct Interface<I>
-  {
-    static int accumulate()
-    {
-      return I;
-    }
-  };
-
-  template<int I, int... Is>
-  struct Interface
-  {
-    static int accumulate()
-    {
-      return I + Interface<Is...>::accumulate();
-    }
-  };
-  #else
-  template<int I1, int I2 = 0, int I3 = 0, int I4 = 0>
-  struct Interface
-  {
-    static int accumulate() { return I1 + I2 + I3 + I4; }
-  };
-  #endif
-
-Such an interface depends on using the correct preprocessor defines for the
-compiler features.  CMake can generate a header file containing such
-defines using the :module:`WriteCompilerDetectionHeader` module.  The
-module contains the ``write_compiler_detection_header`` function which
-accepts parameters to control the content of the generated header file:
-
-.. code-block:: cmake
-
-  write_compiler_detection_header(
-    FILE "${CMAKE_CURRENT_BINARY_DIR}/foo_compiler_detection.h"
-    PREFIX Foo
-    COMPILERS GNU
-    FEATURES
-      cxx_variadic_templates
-  )
-
-Such a header file may be used internally in the source code of a project,
-and it may be installed and used in the interface of library code.
-
-For each feature listed in ``FEATURES``, a preprocessor definition
-is created in the header file, and defined to either ``1`` or ``0``.
-
-Additionally, some features call for additional defines, such as the
-``cxx_final`` and ``cxx_override`` features. Rather than being used in
-``#ifdef`` code, the ``final`` keyword is abstracted by a symbol
-which is defined to either ``final``, a compiler-specific equivalent, or
-to empty.  That way, C++ code can be written to unconditionally use the
-symbol, and compiler support determines what it is expanded to:
-
-.. code-block:: c++
-
-  struct Interface {
-    virtual void Execute() = 0;
-  };
-
-  struct Concrete Foo_FINAL {
-    void Execute() Foo_OVERRIDE;
-  };
-
-In this case, ``Foo_FINAL`` will expand to ``final`` if the
-compiler supports the keyword, or to empty otherwise.
-
-In this use-case, the CMake code will wish to enable a particular language
-standard if available from the compiler. The :prop_tgt:`CXX_STANDARD`
-target property variable may be set to the desired language standard
-for a particular target, and the :variable:`CMAKE_CXX_STANDARD` may be
-set to influence all following targets:
-
-.. code-block:: cmake
-
-  write_compiler_detection_header(
-    FILE "${CMAKE_CURRENT_BINARY_DIR}/foo_compiler_detection.h"
-    PREFIX Foo
-    COMPILERS GNU
-    FEATURES
-      cxx_final cxx_override
-  )
-
-  # Includes foo_compiler_detection.h and uses the Foo_FINAL symbol
-  # which will expand to 'final' if the compiler supports the requested
-  # CXX_STANDARD.
-  add_library(foo foo.cpp)
-  set_property(TARGET foo PROPERTY CXX_STANDARD 11)
-
-  # Includes foo_compiler_detection.h and uses the Foo_FINAL symbol
-  # which will expand to 'final' if the compiler supports the feature,
-  # even though CXX_STANDARD is not set explicitly.  The requirement of
-  # cxx_constexpr causes CMake to set CXX_STANDARD internally, which
-  # affects the compile flags.
-  add_library(foo_impl foo_impl.cpp)
-  target_compile_features(foo_impl PRIVATE cxx_constexpr)
-
-The ``write_compiler_detection_header`` function also creates compatibility
-code for other features which have standard equivalents.  For example, the
-``cxx_static_assert`` feature is emulated with a template and abstracted
-via the ``<PREFIX>_STATIC_ASSERT`` and ``<PREFIX>_STATIC_ASSERT_MSG``
-function-macros.
-
-Conditional Compilation Options
-===============================
-
-Libraries may provide entirely different header files depending on
-requested compiler features.
-
-For example, a header at ``with_variadics/interface.h`` may contain:
-
-.. code-block:: c++
-
-  template<int I, int... Is>
-  struct Interface;
-
-  template<int I>
-  struct Interface<I>
-  {
-    static int accumulate()
-    {
-      return I;
-    }
-  };
-
-  template<int I, int... Is>
-  struct Interface
-  {
-    static int accumulate()
-    {
-      return I + Interface<Is...>::accumulate();
-    }
-  };
-
-while a header at ``no_variadics/interface.h`` may contain:
-
-.. code-block:: c++
-
-  template<int I1, int I2 = 0, int I3 = 0, int I4 = 0>
-  struct Interface
-  {
-    static int accumulate() { return I1 + I2 + I3 + I4; }
-  };
-
-It would be possible to write a abstraction ``interface.h`` header
-containing something like:
-
-.. code-block:: c++
-
-  #include "foo_compiler_detection.h"
-  #if Foo_COMPILER_CXX_VARIADIC_TEMPLATES
-  #include "with_variadics/interface.h"
-  #else
-  #include "no_variadics/interface.h"
-  #endif
-
-However this could be unmaintainable if there are many files to
-abstract. What is needed is to use alternative include directories
-depending on the compiler capabilities.
-
-CMake provides a ``COMPILE_FEATURES``
-:manual:`generator expression <cmake-generator-expressions(7)>` to implement
-such conditions.  This may be used with the build-property commands such as
-:command:`target_include_directories` and :command:`target_link_libraries`
-to set the appropriate :manual:`buildsystem <cmake-buildsystem(7)>`
-properties:
-
-.. code-block:: cmake
-
-  add_library(foo INTERFACE)
-  set(with_variadics ${CMAKE_CURRENT_SOURCE_DIR}/with_variadics)
-  set(no_variadics ${CMAKE_CURRENT_SOURCE_DIR}/no_variadics)
-  target_link_libraries(foo
-    INTERFACE
-      "$<$<COMPILE_FEATURES:cxx_variadic_templates>:${with_variadics}>"
-      "$<$<NOT:$<COMPILE_FEATURES:cxx_variadic_templates>>:${no_variadics}>"
-    )
-
-Consuming code then simply links to the ``foo`` target as usual and uses
-the feature-appropriate include directory
-
-.. code-block:: cmake
-
-  add_executable(consumer_with consumer_with.cpp)
-  target_link_libraries(consumer_with foo)
-  set_property(TARGET consumer_with CXX_STANDARD 11)
-
-  add_executable(consumer_no consumer_no.cpp)
-  target_link_libraries(consumer_no foo)
diff --git a/share/cmake-3.2/Help/manual/cmake-developer.7.rst b/share/cmake-3.2/Help/manual/cmake-developer.7.rst
deleted file mode 100644
index e18250c..0000000
--- a/share/cmake-3.2/Help/manual/cmake-developer.7.rst
+++ /dev/null
@@ -1,1035 +0,0 @@
-.. cmake-manual-description: CMake Developer Reference
-
-cmake-developer(7)
-******************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-This manual is intended for reference by developers modifying the CMake
-source tree itself.
-
-
-Permitted C++ Subset
-====================
-
-CMake is required to build with ancient C++ compilers and standard library
-implementations.  Some common C++ constructs may not be used in CMake in order
-to build with such toolchains.
-
-std::auto_ptr
--------------
-
-Some implementations have a ``std::auto_ptr`` which can not be used as a
-return value from a function. ``std::auto_ptr`` may not be used. Use
-``cmsys::auto_ptr`` instead.
-
-Template Parameter Defaults
----------------------------
-
-On ancient compilers, C++ template must use template parameters in function
-arguments.  If no parameter of that type is needed, the common workaround is
-to add a defaulted pointer to the type to the templated function. However,
-this does not work with other ancient compilers:
-
-.. code-block:: c++
-
-  template<typename PropertyType>
-  PropertyType getTypedProperty(cmTarget* tgt, const char* prop,
-                                PropertyType* = 0) // Wrong
-    {
-
-    }
-
-.. code-block:: c++
-
-  template<typename PropertyType>
-  PropertyType getTypedProperty(cmTarget* tgt, const char* prop,
-                                PropertyType*) // Ok
-    {
-
-    }
-
-and invoke it with the value ``0`` explicitly in all cases.
-
-size_t
-------
-
-Various implementations have differing implementation of ``size_t``.  When
-assigning the result of ``.size()`` on a container for example, the result
-should be assigned to ``size_t`` not to ``std::size_t``, ``unsigned int`` or
-similar types.
-
-Adding Compile Features
-=======================
-
-CMake reports an error if a compiler whose features are known does not report
-support for a particular requested feature.  A compiler is considered to have
-known features if it reports support for at least one feature.
-
-When adding a new compile feature to CMake, it is therefore necessary to list
-support for the feature for all CompilerIds which already have one or more
-feature supported, if the new feature is available for any version of the
-compiler.
-
-When adding the first supported feature to a particular CompilerId, it is
-necessary to list support for all features known to cmake (See
-:variable:`CMAKE_C_COMPILE_FEATURES` and
-:variable:`CMAKE_CXX_COMPILE_FEATURES` as appropriate), where available for
-the compiler.  Furthermore, set ``CMAKE_<LANG>_STANDARD_DEFAULT`` to the
-default language standard level the compiler uses, or to the empty string
-if the compiler has no notion of standard levels (such as ``MSVC``).
-
-It is sensible to record the features for the most recent version of a
-particular CompilerId first, and then work backwards.  It is sensible to
-try to create a continuous range of versions of feature releases of the
-compiler.  Gaps in the range indicate incorrect features recorded for
-intermediate releases.
-
-Generally, features are made available for a particular version if the
-compiler vendor documents availability of the feature with that
-version.  Note that sometimes partially implemented features appear to
-be functional in previous releases (such as ``cxx_constexpr`` in GNU 4.6,
-though availability is documented in GNU 4.7), and sometimes compiler vendors
-document availability of features, though supporting infrastructure is
-not available (such as ``__has_feature(cxx_generic_lambdas)`` indicating
-non-availability in Clang 3.4, though it is documented as available, and
-fixed in Clang 3.5).  Similar cases for other compilers and versions
-need to be investigated when extending CMake to support them.
-
-When a vendor releases a new version of a known compiler which supports
-a previously unsupported feature, and there are already known features for
-that compiler, the feature should be listed as supported in CMake for
-that version of the compiler as soon as reasonably possible.
-
-Standard-specific/compiler-specific variables such
-``CMAKE_CXX98_COMPILE_FEATURES`` are deliberately not documented.  They
-only exist for the compiler-specific implementation of adding the ``-std``
-compile flag for compilers which need that.
-
-Help
-====
-
-The ``Help`` directory contains CMake help manual source files.
-They are written using the `reStructuredText`_ markup syntax and
-processed by `Sphinx`_ to generate the CMake help manuals.
-
-.. _`reStructuredText`: http://docutils.sourceforge.net/docs/ref/rst/introduction.html
-.. _`Sphinx`: http://sphinx-doc.org
-
-Markup Constructs
------------------
-
-In addition to using Sphinx to generate the CMake help manuals, we
-also use a C++-implemented document processor to print documents for
-the ``--help-*`` command-line help options.  It supports a subset of
-reStructuredText markup.  When authoring or modifying documents,
-please verify that the command-line help looks good in addition to the
-Sphinx-generated html and man pages.
-
-The command-line help processor supports the following constructs
-defined by reStructuredText, Sphinx, and a CMake extension to Sphinx.
-
-..
- Note: This list must be kept consistent with the cmRST implementation.
-
-CMake Domain directives
- Directives defined in the `CMake Domain`_ for defining CMake
- documentation objects are printed in command-line help output as
- if the lines were normal paragraph text with interpretation.
-
-CMake Domain interpreted text roles
- Interpreted text roles defined in the `CMake Domain`_ for
- cross-referencing CMake documentation objects are replaced by their
- link text in command-line help output.  Other roles are printed
- literally and not processed.
-
-``code-block`` directive
- Add a literal code block without interpretation.  The command-line
- help processor prints the block content without the leading directive
- line and with common indentation replaced by one space.
-
-``include`` directive
- Include another document source file.  The command-line help
- processor prints the included document inline with the referencing
- document.
-
-literal block after ``::``
- A paragraph ending in ``::`` followed by a blank line treats
- the following indented block as literal text without interpretation.
- The command-line help processor prints the ``::`` literally and
- prints the block content with common indentation replaced by one
- space.
-
-``note`` directive
- Call out a side note.  The command-line help processor prints the
- block content as if the lines were normal paragraph text with
- interpretation.
-
-``parsed-literal`` directive
- Add a literal block with markup interpretation.  The command-line
- help processor prints the block content without the leading
- directive line and with common indentation replaced by one space.
-
-``productionlist`` directive
- Render context-free grammar productions.  The command-line help
- processor prints the block content as if the lines were normal
- paragraph text with interpretation.
-
-``replace`` directive
- Define a ``|substitution|`` replacement.
- The command-line help processor requires a substitution replacement
- to be defined before it is referenced.
-
-``|substitution|`` reference
- Reference a substitution replacement previously defined by
- the ``replace`` directive.  The command-line help processor
- performs the substitution and replaces all newlines in the
- replacement text with spaces.
-
-``toctree`` directive
- Include other document sources in the Table-of-Contents
- document tree.  The command-line help processor prints
- the referenced documents inline as part of the referencing
- document.
-
-Inline markup constructs not listed above are printed literally in the
-command-line help output.  We prefer to use inline markup constructs that
-look correct in source form, so avoid use of \\-escapes in favor of inline
-literals when possible.
-
-Explicit markup blocks not matching directives listed above are removed from
-command-line help output.  Do not use them, except for plain ``..`` comments
-that are removed by Sphinx too.
-
-Note that nested indentation of blocks is not recognized by the
-command-line help processor.  Therefore:
-
-* Explicit markup blocks are recognized only when not indented
-  inside other blocks.
-
-* Literal blocks after paragraphs ending in ``::`` but not
-  at the top indentation level may consume all indented lines
-  following them.
-
-Try to avoid these cases in practice.
-
-CMake Domain
-------------
-
-CMake adds a `Sphinx Domain`_ called ``cmake``, also called the
-"CMake Domain".  It defines several "object" types for CMake
-documentation:
-
-``command``
- A CMake language command.
-
-``generator``
- A CMake native build system generator.
- See the :manual:`cmake(1)` command-line tool's ``-G`` option.
-
-``manual``
- A CMake manual page, like this :manual:`cmake-developer(7)` manual.
-
-``module``
- A CMake module.
- See the :manual:`cmake-modules(7)` manual
- and the :command:`include` command.
-
-``policy``
- A CMake policy.
- See the :manual:`cmake-policies(7)` manual
- and the :command:`cmake_policy` command.
-
-``prop_cache, prop_dir, prop_gbl, prop_sf, prop_inst, prop_test, prop_tgt``
- A CMake cache, directory, global, source file, installed file, test,
- or target property, respectively.  See the :manual:`cmake-properties(7)`
- manual and the :command:`set_property` command.
-
-``variable``
- A CMake language variable.
- See the :manual:`cmake-variables(7)` manual
- and the :command:`set` command.
-
-Documentation objects in the CMake Domain come from two sources.
-First, the CMake extension to Sphinx transforms every document named
-with the form ``Help/<type>/<file-name>.rst`` to a domain object with
-type ``<type>``.  The object name is extracted from the document title,
-which is expected to be of the form::
-
- <object-name>
- -------------
-
-and to appear at or near the top of the ``.rst`` file before any other
-lines starting in a letter, digit, or ``<``.  If no such title appears
-literally in the ``.rst`` file, the object name is the ``<file-name>``.
-If a title does appear, it is expected that ``<file-name>`` is equal
-to ``<object-name>`` with any ``<`` and ``>`` characters removed.
-
-Second, the CMake Domain provides directives to define objects inside
-other documents:
-
-.. code-block:: rst
-
- .. command:: <command-name>
-
-  This indented block documents <command-name>.
-
- .. variable:: <variable-name>
-
-  This indented block documents <variable-name>.
-
-Object types for which no directive is available must be defined using
-the first approach above.
-
-.. _`Sphinx Domain`: http://sphinx-doc.org/domains.html
-
-Cross-References
-----------------
-
-Sphinx uses reStructuredText interpreted text roles to provide
-cross-reference syntax.  The `CMake Domain`_ provides for each
-domain object type a role of the same name to cross-reference it.
-CMake Domain roles are inline markup of the forms::
-
- :type:`name`
- :type:`text <name>`
-
-where ``type`` is the domain object type and ``name`` is the
-domain object name.  In the first form the link text will be
-``name`` (or ``name()`` if the type is ``command``) and in
-the second form the link text will be the explicit ``text``.
-For example, the code:
-
-.. code-block:: rst
-
- * The :command:`list` command.
- * The :command:`list(APPEND)` sub-command.
- * The :command:`list() command <list>`.
- * The :command:`list(APPEND) sub-command <list>`.
- * The :variable:`CMAKE_VERSION` variable.
- * The :prop_tgt:`OUTPUT_NAME_<CONFIG>` target property.
-
-produces:
-
-* The :command:`list` command.
-* The :command:`list(APPEND)` sub-command.
-* The :command:`list() command <list>`.
-* The :command:`list(APPEND) sub-command <list>`.
-* The :variable:`CMAKE_VERSION` variable.
-* The :prop_tgt:`OUTPUT_NAME_<CONFIG>` target property.
-
-Note that CMake Domain roles differ from Sphinx and reStructuredText
-convention in that the form ``a<b>``, without a space preceding ``<``,
-is interpreted as a name instead of link text with an explicit target.
-This is necessary because we use ``<placeholders>`` frequently in
-object names like ``OUTPUT_NAME_<CONFIG>``.  The form ``a <b>``,
-with a space preceding ``<``, is still interpreted as a link text
-with an explicit target.
-
-Style
------
-
-Style: Section Headers
-^^^^^^^^^^^^^^^^^^^^^^
-
-When marking section titles, make the section decoration line as long as
-the title text.  Use only a line below the title, not above. For
-example:
-
-.. code-block:: rst
-
-  Title Text
-  ----------
-
-Capitalize the first letter of each non-minor word in the title.
-
-The section header underline character hierarchy is
-
-* ``#``: Manual group (part) in the master document
-* ``*``: Manual (chapter) title
-* ``=``: Section within a manual
-* ``-``: Subsection or `CMake Domain`_ object document title
-* ``^``: Subsubsection or `CMake Domain`_ object document section
-* ``"``: Paragraph or `CMake Domain`_ object document subsection
-
-Style: Whitespace
-^^^^^^^^^^^^^^^^^
-
-Use two spaces for indentation.  Use two spaces between sentences in
-prose.
-
-Style: Line Length
-^^^^^^^^^^^^^^^^^^
-
-Prefer to restrict the width of lines to 75-80 columns.  This is not a
-hard restriction, but writing new paragraphs wrapped at 75 columns
-allows space for adding minor content without significant re-wrapping of
-content.
-
-Style: Prose
-^^^^^^^^^^^^
-
-Use American English spellings in prose.
-
-Style: Starting Literal Blocks
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Prefer to mark the start of literal blocks with ``::`` at the end of
-the preceding paragraph. In cases where the following block gets
-a ``code-block`` marker, put a single ``:`` at the end of the preceding
-paragraph.
-
-Style: CMake Command Signatures
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Command signatures should be marked up as plain literal blocks, not as
-cmake ``code-blocks``.
-
-Signatures are separated from preceding content by a section header.
-That is, use:
-
-.. code-block:: rst
-
-  ... preceding paragraph.
-
-  Normal Libraries
-  ^^^^^^^^^^^^^^^^
-
-  ::
-
-    add_library(<lib> ...)
-
-  This signature is used for ...
-
-Signatures of commands should wrap optional parts with square brackets,
-and should mark list of optional arguments with an ellipsis (``...``).
-Elements of the signature which are specified by the user should be
-specified with angle brackets, and may be referred to in prose using
-``inline-literal`` syntax.
-
-Style: Boolean Constants
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-Use "``OFF``" and "``ON``" for boolean values which can be modified by
-the user, such as :prop_tgt:`POSITION_INDEPENDENT_CODE`. Such properties
-may be "enabled" and "disabled". Use "``True``" and "``False``" for
-inherent values which can't be modified after being set, such as the
-:prop_tgt:`IMPORTED` property of a build target.
-
-Style: Inline Literals
-^^^^^^^^^^^^^^^^^^^^^^
-
-Mark up references to keywords in signatures, file names, and other
-technical terms with ``inline-literal`` syntax, for example:
-
-.. code-block:: rst
-
-  If ``WIN32`` is used with :command:`add_executable`, the
-  :prop_tgt:`WIN32_EXECUTABLE` target property is enabled. That command
-  creates the file ``<name>.exe`` on Windows.
-
-Style: Cross-References
-^^^^^^^^^^^^^^^^^^^^^^^
-
-Mark up linkable references as links, including repeats.
-An alternative, which is used by wikipedia
-(`<http://en.wikipedia.org/wiki/WP:REPEATLINK>`_),
-is to link to a reference only once per article. That style is not used
-in CMake documentation.
-
-Style: Referencing CMake Concepts
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-If referring to a concept which corresponds to a property, and that
-concept is described in a high-level manual, prefer to link to the
-manual section instead of the property. For example:
-
-.. code-block:: rst
-
-  This command creates an :ref:`Imported Target <Imported Targets>`.
-
-instead of:
-
-.. code-block:: rst
-
-  This command creates an :prop_tgt:`IMPORTED` target.
-
-The latter should be used only when referring specifically to the
-property.
-
-References to manual sections are not automatically created by creating
-a section, but code such as:
-
-.. code-block:: rst
-
-  .. _`Imported Targets`:
-
-creates a suitable anchor.  Use an anchor name which matches the name
-of the corresponding section.  Refer to the anchor using a
-cross-reference with specified text.
-
-Imported Targets need the ``IMPORTED`` term marked up with care in
-particular because the term may refer to a command keyword
-(``IMPORTED``), a target property (:prop_tgt:`IMPORTED`), or a
-concept (:ref:`Imported Targets`).
-
-Where a property, command or variable is related conceptually to others,
-by for example, being related to the buildsystem description, generator
-expressions or Qt, each relevant property, command or variable should
-link to the primary manual, which provides high-level information.  Only
-particular information relating to the command should be in the
-documentation of the command.
-
-Style: Referencing CMake Domain Objects
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-When referring to `CMake Domain`_ objects such as properties, variables,
-commands etc, prefer to link to the target object and follow that with
-the type of object it is.  For example:
-
-.. code-block:: rst
-
-  Set the :prop_tgt:`AUTOMOC` target property to ``ON``.
-
-Instead of
-
-.. code-block:: rst
-
-  Set the target property :prop_tgt:`AUTOMOC` to ``ON``.
-
-The ``policy`` directive is an exception, and the type us usually
-referred to before the link:
-
-.. code-block:: rst
-
-  If policy :prop_tgt:`CMP0022` is set to ``NEW`` the behavior is ...
-
-However, markup self-references with ``inline-literal`` syntax.
-For example, within the :command:`add_executable` command
-documentation, use
-
-.. code-block:: rst
-
-  ``add_executable``
-
-not
-
-.. code-block:: rst
-
-  :command:`add_executable`
-
-which is used elsewhere.
-
-Modules
-=======
-
-The ``Modules`` directory contains CMake-language ``.cmake`` module files.
-
-Module Documentation
---------------------
-
-To document CMake module ``Modules/<module-name>.cmake``, modify
-``Help/manual/cmake-modules.7.rst`` to reference the module in the
-``toctree`` directive, in sorted order, as::
-
- /module/<module-name>
-
-Then add the module document file ``Help/module/<module-name>.rst``
-containing just the line::
-
- .. cmake-module:: ../../Modules/<module-name>.cmake
-
-The ``cmake-module`` directive will scan the module file to extract
-reStructuredText markup from comment blocks that start in ``.rst:``.
-Add to the top of ``Modules/<module-name>.cmake`` a
-:ref:`Line Comment` block of the form:
-
-.. code-block:: cmake
-
- #.rst:
- # <module-name>
- # -------------
- #
- # <reStructuredText documentation of module>
-
-or a :ref:`Bracket Comment` of the form:
-
-.. code-block:: cmake
-
- #[[.rst:
- <module-name>
- -------------
-
- <reStructuredText documentation of module>
- #]]
-
-Any number of ``=`` may be used in the opening and closing brackets
-as long as they match.  Content on the line containing the closing
-bracket is excluded if and only if the line starts in ``#``.
-
-Additional such ``.rst:`` comments may appear anywhere in the module file.
-All such comments must start with ``#`` in the first column.
-
-For example, a ``Modules/Findxxx.cmake`` module may contain:
-
-.. code-block:: cmake
-
- #.rst:
- # FindXxx
- # -------
- #
- # This is a cool module.
- # This module does really cool stuff.
- # It can do even more than you think.
- #
- # It even needs two paragraphs to tell you about it.
- # And it defines the following variables:
- #
- # * VAR_COOL: this is great isn't it?
- # * VAR_REALLY_COOL: cool right?
-
- <code>
-
- #[========================================[.rst:
- .. command:: xxx_do_something
-
-  This command does something for Xxx::
-
-   xxx_do_something(some arguments)
- #]========================================]
- macro(xxx_do_something)
-   <code>
- endmacro()
-
-After the top documentation block, leave a *BLANK* line, and then add a
-copyright and licence notice block like this one (change only the year
-range and name)
-
-.. code-block:: cmake
-
-  #=============================================================================
-  # Copyright 2009-2011 Your Name
-  #
-  # Distributed under the OSI-approved BSD License (the "License");
-  # see accompanying file Copyright.txt for details.
-  #
-  # This software is distributed WITHOUT ANY WARRANTY; without even the
-  # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  # See the License for more information.
-  #=============================================================================
-  # (To distribute this file outside of CMake, substitute the full
-  #  License text for the above reference.)
-
-Test the documentation formatting by running
-``cmake --help-module <module-name>``, and also by enabling the
-``SPHINX_HTML`` and ``SPHINX_MAN`` options to build the documentation.
-Edit the comments until generated documentation looks satisfactory.  To
-have a .cmake file in this directory NOT show up in the modules
-documentation, simply leave out the ``Help/module/<module-name>.rst``
-file and the ``Help/manual/cmake-modules.7.rst`` toctree entry.
-
-
-Find Modules
-------------
-
-A "find module" is a ``Modules/Find<package>.cmake`` file to be loaded
-by the :command:`find_package` command when invoked for ``<package>``.
-
-The primary task of a find module is to determine whether a package
-exists on the system, set the ``<package>_FOUND`` variable to reflect
-this and provide any variables, macros and imported targets required to
-use the package.  A find module is useful in cases where an upstream
-library does not provide a
-:ref:`config file package <Config File Packages>`.
-
-The traditional approach is to use variables for everything, including
-libraries and executables: see the `Standard Variable Names`_ section
-below.  This is what most of the existing find modules provided by CMake
-do.
-
-The more modern approach is to behave as much like
-:ref:`config file packages <Config File Packages>` files as possible, by
-providing :ref:`imported target <Imported targets>`.  This has the advantage
-of propagating :ref:`Target Usage Requirements` to consumers.
-
-In either case (or even when providing both variables and imported
-targets), find modules should provide backwards compatibility with old
-versions that had the same name.
-
-A FindFoo.cmake module will typically be loaded by the command::
-
-  find_package(Foo [major[.minor[.patch[.tweak]]]]
-               [EXACT] [QUIET] [REQUIRED]
-               [[COMPONENTS] [components...]]
-               [OPTIONAL_COMPONENTS components...]
-               [NO_POLICY_SCOPE])
-
-See the :command:`find_package` documentation for details on what
-variables are set for the find module.  Most of these are dealt with by
-using :module:`FindPackageHandleStandardArgs`.
-
-Briefly, the module should only locate versions of the package
-compatible with the requested version, as described by the
-``Foo_FIND_VERSION`` family of variables.  If ``Foo_FIND_QUIETLY`` is
-set to true, it should avoid printing messages, including anything
-complaining about the package not being found.  If ``Foo_FIND_REQUIRED``
-is set to true, the module should issue a ``FATAL_ERROR`` if the package
-cannot be found.  If neither are set to true, it should print a
-non-fatal message if it cannot find the package.
-
-Packages that find multiple semi-independent parts (like bundles of
-libraries) should search for the components listed in
-``Foo_FIND_COMPONENTS`` if it is set , and only set ``Foo_FOUND`` to
-true if for each searched-for component ``<c>`` that was not found,
-``Foo_FIND_REQUIRED_<c>`` is not set to true.  The ``HANDLE_COMPONENTS``
-argument of ``find_package_handle_standard_args()`` can be used to
-implement this.
-
-If ``Foo_FIND_COMPONENTS`` is not set, which modules are searched for
-and required is up to the find module, but should be documented.
-
-For internal implementation, it is a generally accepted convention that
-variables starting with underscore are for temporary use only.
-
-Like all modules, find modules should be properly documented.  To add a
-module to the CMake documentation, follow the steps in the `Module
-Documentation`_ section above.
-
-
-
-Standard Variable Names
-^^^^^^^^^^^^^^^^^^^^^^^
-
-For a ``FindXxx.cmake`` module that takes the approach of setting
-variables (either instead of or in addition to creating imported
-targets), the following variable names should be used to keep things
-consistent between find modules.  Note that all variables start with
-``Xxx_`` to make sure they do not interfere with other find modules; the
-same consideration applies to macros, functions and imported targets.
-
-``Xxx_INCLUDE_DIRS``
-  The final set of include directories listed in one variable for use by
-  client code.  This should not be a cache entry.
-
-``Xxx_LIBRARIES``
-  The libraries to link against to use Xxx. These should include full
-  paths.  This should not be a cache entry.
-
-``Xxx_DEFINITIONS``
-  Definitions to use when compiling code that uses Xxx. This really
-  shouldn't include options such as ``-DHAS_JPEG`` that a client
-  source-code file uses to decide whether to ``#include <jpeg.h>``
-
-``Xxx_EXECUTABLE``
-  Where to find the Xxx tool.
-
-``Xxx_Yyy_EXECUTABLE``
-  Where to find the Yyy tool that comes with Xxx.
-
-``Xxx_LIBRARY_DIRS``
-  Optionally, the final set of library directories listed in one
-  variable for use by client code.  This should not be a cache entry.
-
-``Xxx_ROOT_DIR``
-  Where to find the base directory of Xxx.
-
-``Xxx_VERSION_Yy``
-  Expect Version Yy if true. Make sure at most one of these is ever true.
-
-``Xxx_WRAP_Yy``
-  If False, do not try to use the relevant CMake wrapping command.
-
-``Xxx_Yy_FOUND``
-  If False, optional Yy part of Xxx sytem is not available.
-
-``Xxx_FOUND``
-  Set to false, or undefined, if we haven't found, or don't want to use
-  Xxx.
-
-``Xxx_NOT_FOUND_MESSAGE``
-  Should be set by config-files in the case that it has set
-  ``Xxx_FOUND`` to FALSE.  The contained message will be printed by the
-  :command:`find_package` command and by
-  ``find_package_handle_standard_args()`` to inform the user about the
-  problem.
-
-``Xxx_RUNTIME_LIBRARY_DIRS``
-  Optionally, the runtime library search path for use when running an
-  executable linked to shared libraries.  The list should be used by
-  user code to create the ``PATH`` on windows or ``LD_LIBRARY_PATH`` on
-  UNIX.  This should not be a cache entry.
-
-``Xxx_VERSION``
-  The full version string of the package found, if any.  Note that many
-  existing modules provide ``Xxx_VERSION_STRING`` instead.
-
-``Xxx_VERSION_MAJOR``
-  The major version of the package found, if any.
-
-``Xxx_VERSION_MINOR``
-  The minor version of the package found, if any.
-
-``Xxx_VERSION_PATCH``
-  The patch version of the package found, if any.
-
-The following names should not usually be used in CMakeLists.txt files, but
-are typically cache variables for users to edit and control the
-behaviour of find modules (like entering the path to a library manually)
-
-``Xxx_LIBRARY``
-  The path of the Xxx library (as used with :command:`find_library`, for
-  example).
-
-``Xxx_Yy_LIBRARY``
-  The path of the Yy library that is part of the Xxx system. It may or
-  may not be required to use Xxx.
-
-``Xxx_INCLUDE_DIR``
-  Where to find headers for using the Xxx library.
-
-``Xxx_Yy_INCLUDE_DIR``
-  Where to find headers for using the Yy library of the Xxx system.
-
-To prevent users being overwhelmed with settings to configure, try to
-keep as many options as possible out of the cache, leaving at least one
-option which can be used to disable use of the module, or locate a
-not-found library (e.g. ``Xxx_ROOT_DIR``).  For the same reason, mark
-most cache options as advanced.  For packages which provide both debug
-and release binaries, it is common to create cache variables with a
-``_LIBRARY_<CONFIG>`` suffix, such as ``Foo_LIBRARY_RELEASE`` and
-``Foo_LIBRARY_DEBUG``.
-
-While these are the standard variable names, you should provide
-backwards compatibility for any old names that were actually in use.
-Make sure you comment them as deprecated, so that no-one starts using
-them.
-
-
-
-A Sample Find Module
-^^^^^^^^^^^^^^^^^^^^
-
-We will describe how to create a simple find module for a library
-``Foo``.
-
-The first thing that is needed is documentation.  CMake's documentation
-system requires you to start the file with a documentation marker and
-the name of the module.  You should follow this with a simple statement
-of what the module does.
-
-.. code-block:: cmake
-
-  #.rst:
-  # FindFoo
-  # -------
-  #
-  # Finds the Foo library
-  #
-
-More description may be required for some packages.  If there are
-caveats or other details users of the module should be aware of, you can
-add further paragraphs below this.  Then you need to document what
-variables and imported targets are set by the module, such as
-
-.. code-block:: cmake
-
-  # This will define the following variables::
-  #
-  #   Foo_FOUND    - True if the system has the Foo library
-  #   Foo_VERSION  - The version of the Foo library which was found
-  #
-  # and the following imported targets::
-  #
-  #   Foo::Foo   - The Foo library
-
-If the package provides any macros, they should be listed here, but can
-be documented where they are defined.  See the `Module
-Documentation`_ section above for more details.
-
-After the documentation, leave a blank line, and then add a copyright and
-licence notice block
-
-.. code-block:: cmake
-
-  #=============================================================================
-  # Copyright 2009-2011 Your Name
-  #
-  # Distributed under the OSI-approved BSD License (the "License");
-  # see accompanying file Copyright.txt for details.
-  #
-  # This software is distributed WITHOUT ANY WARRANTY; without even the
-  # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  # See the License for more information.
-  #=============================================================================
-  # (To distribute this file outside of CMake, substitute the full
-  #  License text for the above reference.)
-
-Now the actual libraries and so on have to be found.  The code here will
-obviously vary from module to module (dealing with that, after all, is the
-point of find modules), but there tends to be a common pattern for libraries.
-
-First, we try to use ``pkg-config`` to find the library.  Note that we
-cannot rely on this, as it may not be available, but it provides a good
-starting point.
-
-.. code-block:: cmake
-
-  find_package(PkgConfig)
-  pkg_check_modules(PC_Foo QUIET Foo)
-
-This should define some variables starting ``PC_Foo_`` that contain the
-information from the ``Foo.pc`` file.
-
-Now we need to find the libraries and include files; we use the
-information from ``pkg-config`` to provide hints to CMake about where to
-look.
-
-.. code-block:: cmake
-
-  find_path(Foo_INCLUDE_DIR
-    NAMES foo.h
-    PATHS ${PC_Foo_INCLUDE_DIRS}
-    # if you need to put #include <Foo/foo.h> in your code, add:
-    PATH_SUFFIXES Foo
-  )
-  find_library(Foo_LIBRARY
-    NAMES foo
-    PATHS ${PC_Foo_LIBRARY_DIRS}
-  )
-
-If you have a good way of getting the version (from a header file, for
-example), you can use that information to set ``Foo_VERSION`` (although
-note that find modules have traditionally used ``Foo_VERSION_STRING``,
-so you may want to set both).  Otherwise, attempt to use the information
-from ``pkg-config``
-
-.. code-block:: cmake
-
-  set(Foo_VERSION ${PC_Foo_VERSION})
-
-Now we can use :module:`FindPackageHandleStandardArgs` to do most of the
-rest of the work for us
-
-.. code-block:: cmake
-
-  include(FindPackageHandleStandardArgs)
-  find_package_handle_standard_args(Foo
-    FOUND_VAR Foo_FOUND
-    REQUIRED_VARS
-      Foo_LIBRARY
-      Foo_INCLUDE_DIR
-    VERSION_VAR Foo_VERSION
-  )
-
-This will check that the ``REQUIRED_VARS`` contain values (that do not
-end in ``-NOTFOUND``) and set ``Foo_FOUND`` appropriately.  It will also
-cache those values.  If ``Foo_VERSION`` is set, and a required version
-was passed to :command:`find_package`, it will check the requested version
-against the one in ``Foo_VERSION``.  It will also print messages as
-appropriate; note that if the package was found, it will print the
-contents of the first required variable to indicate where it was found.
-
-At this point, we have to provide a way for users of the find module to
-link to the library or libraries that were found.  There are two
-approaches, as discussed in the `Find Modules`_ section above.  The
-traditional variable approach looks like
-
-.. code-block:: cmake
-
-  if(Foo_FOUND)
-    set(Foo_LIBRARIES ${Foo_LIBRARY})
-    set(Foo_INCLUDE_DIRS ${Foo_INCLUDE_DIR})
-    set(Foo_DEFINITIONS ${PC_Foo_CFLAGS_OTHER})
-  endif()
-
-If more than one library was found, all of them should be included in
-these variables (see the `Standard Variable Names`_ section for more
-information).
-
-When providing imported targets, these should be namespaced (hence the
-``Foo::`` prefix); CMake will recognize that values passed to
-:command:`target_link_libraries` that contain ``::`` in their name are
-supposed to be imported targets (rather than just library names), and
-will produce appropriate diagnostic messages if that target does not
-exist (see policy :policy:`CMP0028`).
-
-.. code-block:: cmake
-
-  if(Foo_FOUND AND NOT TARGET Foo::Foo)
-    add_library(Foo::Foo UNKNOWN IMPORTED)
-    set_target_properties(Foo::Foo PROPERTIES
-      IMPORTED_LOCATION "${Foo_LIBRARY}"
-      INTERFACE_COMPILE_OPTIONS "${PC_Foo_CFLAGS_OTHER}"
-      INTERFACE_INCLUDE_DIRECTORIES "${Foo_INCLUDE_DIR}"
-    )
-  endif()
-
-One thing to note about this is that the ``INTERFACE_INCLUDE_DIRECTORIES`` and
-similar properties should only contain information about the target itself, and
-not any of its dependencies.  Instead, those dependencies should also be
-targets, and CMake should be told that they are dependencies of this target.
-CMake will then combine all the necessary information automatically.
-
-The type of the :prop_tgt:`IMPORTED` target created in the
-:command:`add_library` command can always be specified as ``UNKNOWN``
-type.  This simplifies the code in cases where static or shared variants may
-be found, and CMake will determine the type by inspecting the files.
-
-If the library is available with multiple configurations, the
-:prop_tgt:`IMPORTED_CONFIGURATIONS` target property should also be
-populated:
-
-.. code-block:: cmake
-
-  if(Foo_FOUND)
-    if (NOT TARGET Foo::Foo)
-      add_library(Foo::Foo UNKNOWN IMPORTED)
-    endif()
-    if (Foo_LIBRARY_RELEASE)
-      set_property(TARGET Foo::Foo APPEND PROPERTY
-        IMPORTED_CONFIGURATIONS RELEASE
-      )
-      set_target_properties(Foo::Foo PROPERTIES
-        IMPORTED_LOCATION_RELEASE "${Foo_LIBRARY_RELEASE}"
-      )
-    endif()
-    if (Foo_LIBRARY_DEBUG)
-      set_property(TARGET Foo::Foo APPEND PROPERTY
-        IMPORTED_CONFIGURATIONS DEBUG
-      )
-      set_target_properties(Foo::Foo PROPERTIES
-        IMPORTED_LOCATION_DEBUG "${Foo_LIBRARY_DEBUG}"
-      )
-    endif()
-    set_target_properties(Foo::Foo PROPERTIES
-      INTERFACE_COMPILE_OPTIONS "${PC_Foo_CFLAGS_OTHER}"
-      INTERFACE_INCLUDE_DIRECTORIES "${Foo_INCLUDE_DIR}"
-    )
-  endif()
-
-The ``RELEASE`` variant should be listed first in the property
-so that that variant is chosen if the user uses a configuration which is
-not an exact match for any listed ``IMPORTED_CONFIGURATIONS``.
-
-Most of the cache variables should be hidden in the ``ccmake`` interface unless
-the user explicitly asks to edit them.
-
-.. code-block:: cmake
-
-  mark_as_advanced(
-    Foo_INCLUDE_DIR
-    Foo_LIBRARY
-  )
-
-If this module replaces an older version, you should set compatibility variables
-to cause the least disruption possible.
-
-.. code-block:: cmake
-
-  # compatibility variables
-  set(Foo_VERSION_STRING ${Foo_VERSION})
diff --git a/share/cmake-3.2/Help/manual/cmake-generator-expressions.7.rst b/share/cmake-3.2/Help/manual/cmake-generator-expressions.7.rst
deleted file mode 100644
index c47a7c4..0000000
--- a/share/cmake-3.2/Help/manual/cmake-generator-expressions.7.rst
+++ /dev/null
@@ -1,236 +0,0 @@
-.. cmake-manual-description: CMake Generator Expressions
-
-cmake-generator-expressions(7)
-******************************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-Generator expressions are evaluated during build system generation to produce
-information specific to each build configuration.
-
-Generator expressions are allowed in the context of many target properties,
-such as :prop_tgt:`LINK_LIBRARIES`, :prop_tgt:`INCLUDE_DIRECTORIES`,
-:prop_tgt:`COMPILE_DEFINITIONS` and others.  They may also be used when using
-commands to populate those properties, such as :command:`target_link_libraries`,
-:command:`target_include_directories`, :command:`target_compile_definitions`
-and others.
-
-This means that they enable conditional linking, conditional
-definitions used when compiling, and conditional include directories and
-more.  The conditions may be based on the build configuration, target
-properties, platform information or any other queryable information.
-
-Logical Expressions
-===================
-
-Logical expressions are used to create conditional output.  The basic
-expressions are the ``0`` and ``1`` expressions.  Because other logical
-expressions evaluate to either ``0`` or ``1``, they can be composed to
-create conditional output::
-
-  $<$<CONFIG:Debug>:DEBUG_MODE>
-
-expands to ``DEBUG_MODE`` when the ``Debug`` configuration is used, and
-otherwise expands to nothing.
-
-Available logical expressions are:
-
-``$<0:...>``
-  Empty string (ignores ``...``)
-``$<1:...>``
-  Content of ``...``
-``$<BOOL:...>``
-  ``1`` if the ``...`` is true, else ``0``
-``$<AND:?[,?]...>``
-  ``1`` if all ``?`` are ``1``, else ``0``
-
-  The ``?`` must always be either ``0`` or ``1`` in boolean expressions.
-
-``$<OR:?[,?]...>``
-  ``0`` if all ``?`` are ``0``, else ``1``
-``$<NOT:?>``
-  ``0`` if ``?`` is ``1``, else ``1``
-``$<STREQUAL:a,b>``
-  ``1`` if ``a`` is STREQUAL ``b``, else ``0``
-``$<EQUAL:a,b>``
-  ``1`` if ``a`` is EQUAL ``b`` in a numeric comparison, else ``0``
-``$<CONFIG:cfg>``
-  ``1`` if config is ``cfg``, else ``0``. This is a case-insensitive comparison.
-  The mapping in :prop_tgt:`MAP_IMPORTED_CONFIG_<CONFIG>` is also considered by
-  this expression when it is evaluated on a property on an :prop_tgt:`IMPORTED`
-  target.
-``$<PLATFORM_ID:comp>``
-  ``1`` if the CMake-id of the platform matches ``comp``, otherwise ``0``.
-``$<C_COMPILER_ID:comp>``
-  ``1`` if the CMake-id of the C compiler matches ``comp``, otherwise ``0``.
-``$<CXX_COMPILER_ID:comp>``
-  ``1`` if the CMake-id of the CXX compiler matches ``comp``, otherwise ``0``.
-``$<VERSION_GREATER:v1,v2>``
-  ``1`` if ``v1`` is a version greater than ``v2``, else ``0``.
-``$<VERSION_LESS:v1,v2>``
-  ``1`` if ``v1`` is a version less than ``v2``, else ``0``.
-``$<VERSION_EQUAL:v1,v2>``
-  ``1`` if ``v1`` is the same version as ``v2``, else ``0``.
-``$<C_COMPILER_VERSION:ver>``
-  ``1`` if the version of the C compiler matches ``ver``, otherwise ``0``.
-``$<CXX_COMPILER_VERSION:ver>``
-  ``1`` if the version of the CXX compiler matches ``ver``, otherwise ``0``.
-``$<TARGET_POLICY:pol>``
-  ``1`` if the policy ``pol`` was NEW when the 'head' target was created,
-  else ``0``.  If the policy was not set, the warning message for the policy
-  will be emitted. This generator expression only works for a subset of
-  policies.
-``$<COMPILE_FEATURES:feature[,feature]...>``
-  ``1`` if all of the ``feature`` features are available for the 'head'
-  target, and ``0`` otherwise. If this expression is used while evaluating
-  the link implementation of a target and if any dependency transitively
-  increases the required :prop_tgt:`C_STANDARD` or :prop_tgt:`CXX_STANDARD`
-  for the 'head' target, an error is reported.  See the
-  :manual:`cmake-compile-features(7)` manual for information on
-  compile features.
-
-Informational Expressions
-=========================
-
-These expressions expand to some information. The information may be used
-directly, eg::
-
-  include_directories(/usr/include/$<CXX_COMPILER_ID>/)
-
-expands to ``/usr/include/GNU/`` or ``/usr/include/Clang/`` etc, depending on
-the Id of the compiler.
-
-These expressions may also may be combined with logical expressions::
-
-  $<$<VERSION_LESS:$<CXX_COMPILER_VERSION>,4.2.0>:OLD_COMPILER>
-
-expands to ``OLD_COMPILER`` if the
-:variable:`CMAKE_CXX_COMPILER_VERSION <CMAKE_<LANG>_COMPILER_VERSION>` is less
-than 4.2.0.
-
-Available informational expressions are:
-
-``$<CONFIGURATION>``
-  Configuration name. Deprecated. Use ``CONFIG`` instead.
-``$<CONFIG>``
-  Configuration name
-``$<PLATFORM_ID>``
-  The CMake-id of the platform.
-  See also the :variable:`CMAKE_SYSTEM_NAME` variable.
-``$<C_COMPILER_ID>``
-  The CMake-id of the C compiler used.
-  See also the :variable:`CMAKE_<LANG>_COMPILER_ID` variable.
-``$<CXX_COMPILER_ID>``
-  The CMake-id of the CXX compiler used.
-  See also the :variable:`CMAKE_<LANG>_COMPILER_ID` variable.
-``$<C_COMPILER_VERSION>``
-  The version of the C compiler used.
-  See also the :variable:`CMAKE_<LANG>_COMPILER_VERSION` variable.
-``$<CXX_COMPILER_VERSION>``
-  The version of the CXX compiler used.
-  See also the :variable:`CMAKE_<LANG>_COMPILER_VERSION` variable.
-``$<TARGET_FILE:tgt>``
-  Full path to main file (.exe, .so.1.2, .a) where ``tgt`` is the name of a target.
-``$<TARGET_FILE_NAME:tgt>``
-  Name of main file (.exe, .so.1.2, .a).
-``$<TARGET_FILE_DIR:tgt>``
-  Directory of main file (.exe, .so.1.2, .a).
-``$<TARGET_LINKER_FILE:tgt>``
-  File used to link (.a, .lib, .so) where ``tgt`` is the name of a target.
-``$<TARGET_LINKER_FILE_NAME:tgt>``
-  Name of file used to link (.a, .lib, .so).
-``$<TARGET_LINKER_FILE_DIR:tgt>``
-  Directory of file used to link (.a, .lib, .so).
-``$<TARGET_SONAME_FILE:tgt>``
-  File with soname (.so.3) where ``tgt`` is the name of a target.
-``$<TARGET_SONAME_FILE_NAME:tgt>``
-  Name of file with soname (.so.3).
-``$<TARGET_SONAME_FILE_DIR:tgt>``
-  Directory of with soname (.so.3).
-``$<TARGET_PDB_FILE:tgt>``
-  Full path to the linker generated program database file (.pdb)
-  where ``tgt`` is the name of a target.
-
-  See also the :prop_tgt:`PDB_NAME` and :prop_tgt:`PDB_OUTPUT_DIRECTORY`
-  target properties and their configuration specific variants
-  :prop_tgt:`PDB_NAME_<CONFIG>` and :prop_tgt:`PDB_OUTPUT_DIRECTORY_<CONFIG>`.
-``$<TARGET_PDB_FILE_NAME:tgt>``
-  Name of the linker generated program database file (.pdb).
-``$<TARGET_PDB_FILE_DIR:tgt>``
-  Directory of the linker generated program database file (.pdb).
-``$<TARGET_PROPERTY:tgt,prop>``
-  Value of the property ``prop`` on the target ``tgt``.
-
-  Note that ``tgt`` is not added as a dependency of the target this
-  expression is evaluated on.
-``$<TARGET_PROPERTY:prop>``
-  Value of the property ``prop`` on the target on which the generator
-  expression is evaluated.
-``$<INSTALL_PREFIX>``
-  Content of the install prefix when the target is exported via
-  :command:`install(EXPORT)` and empty otherwise.
-
-Output Expressions
-==================
-
-These expressions generate output, in some cases depending on an input. These
-expressions may be combined with other expressions for information or logical
-comparison::
-
-  -I$<JOIN:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>, -I>
-
-generates a string of the entries in the :prop_tgt:`INCLUDE_DIRECTORIES` target
-property with each entry preceeded by ``-I``. Note that a more-complete use
-in this situation would require first checking if the INCLUDE_DIRECTORIES
-property is non-empty::
-
-  $<$<BOOL:${prop}>:-I$<JOIN:${prop}, -I>>
-
-where ``${prop}`` refers to a helper variable::
-
-  set(prop "$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>")
-
-Available output expressions are:
-
-``$<JOIN:list,...>``
-  Joins the list with the content of ``...``
-``$<ANGLE-R>``
-  A literal ``>``. Used to compare strings which contain a ``>`` for example.
-``$<COMMA>``
-  A literal ``,``. Used to compare strings which contain a ``,`` for example.
-``$<SEMICOLON>``
-  A literal ``;``. Used to prevent list expansion on an argument with ``;``.
-``$<TARGET_NAME:...>``
-  Marks ``...`` as being the name of a target.  This is required if exporting
-  targets to multiple dependent export sets.  The ``...`` must be a literal
-  name of a target- it may not contain generator expressions.
-``$<LINK_ONLY:...>``
-  Content of ``...`` except when evaluated in a link interface while
-  propagating :ref:`Target Usage Requirements`, in which case it is the
-  empty string.
-  Intended for use only in an :prop_tgt:`INTERFACE_LINK_LIBRARIES` target
-  property, perhaps via the :command:`target_link_libraries` command,
-  to specify private link dependencies without other usage requirements.
-``$<INSTALL_INTERFACE:...>``
-  Content of ``...`` when the property is exported using :command:`install(EXPORT)`,
-  and empty otherwise.
-``$<BUILD_INTERFACE:...>``
-  Content of ``...`` when the property is exported using :command:`export`, or
-  when the target is used by another target in the same buildsystem. Expands to
-  the empty string otherwise.
-``$<LOWER_CASE:...>``
-  Content of ``...`` converted to lower case.
-``$<UPPER_CASE:...>``
-  Content of ``...`` converted to upper case.
-``$<MAKE_C_IDENTIFIER:...>``
-  Content of ``...`` converted to a C identifier.
-``$<TARGET_OBJECTS:objLib>``
-  List of objects resulting from build of ``objLib``. ``objLib`` must be an
-  object of type ``OBJECT_LIBRARY``.  This expression may only be used in
-  the sources of :command:`add_library` and :command:`add_executable`
-  commands.
diff --git a/share/cmake-3.2/Help/manual/cmake-generators.7.rst b/share/cmake-3.2/Help/manual/cmake-generators.7.rst
deleted file mode 100644
index bda7eef..0000000
--- a/share/cmake-3.2/Help/manual/cmake-generators.7.rst
+++ /dev/null
@@ -1,87 +0,0 @@
-.. cmake-manual-description: CMake Generators Reference
-
-cmake-generators(7)
-*******************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-A *CMake Generator* is responsible for writing the input files for
-a native build system.  Exactly one of the `CMake Generators`_ must be
-selected for a build tree to determine what native build system is to
-be used.  Optionally one of the `Extra Generators`_ may be selected
-as a variant of some of the `Command-Line Build Tool Generators`_ to
-produce project files for an auxiliary IDE.
-
-CMake Generators are platform-specific so each may be available only
-on certain platforms.  The :manual:`cmake(1)` command-line tool ``--help``
-output lists available generators on the current platform.  Use its ``-G``
-option to specify the generator for a new build tree.
-The :manual:`cmake-gui(1)` offers interactive selection of a generator
-when creating a new build tree.
-
-CMake Generators
-================
-
-Command-Line Build Tool Generators
-----------------------------------
-
-These generators support command-line build tools.  In order to use them,
-one must launch CMake from a command-line prompt whose environment is
-already configured for the chosen compiler and build tool.
-
-.. toctree::
-   :maxdepth: 1
-
-   /generator/Borland Makefiles
-   /generator/MSYS Makefiles
-   /generator/MinGW Makefiles
-   /generator/NMake Makefiles
-   /generator/NMake Makefiles JOM
-   /generator/Ninja
-   /generator/Unix Makefiles
-   /generator/Watcom WMake
-
-IDE Build Tool Generators
--------------------------
-
-These generators support Integrated Development Environment (IDE)
-project files.  Since the IDEs configure their own environment
-one may launch CMake from any environment.
-
-.. toctree::
-   :maxdepth: 1
-
-   /generator/Visual Studio 6
-   /generator/Visual Studio 7
-   /generator/Visual Studio 7 .NET 2003
-   /generator/Visual Studio 8 2005
-   /generator/Visual Studio 9 2008
-   /generator/Visual Studio 10 2010
-   /generator/Visual Studio 11 2012
-   /generator/Visual Studio 12 2013
-   /generator/Visual Studio 14 2015
-   /generator/Xcode
-
-Extra Generators
-================
-
-Some of the `CMake Generators`_ listed in the :manual:`cmake(1)`
-command-line tool ``--help`` output may have variants that specify
-an extra generator for an auxiliary IDE tool.  Such generator
-names have the form ``<extra-generator> - <main-generator>``.
-The following extra generators are known to CMake.
-
-.. toctree::
-   :maxdepth: 1
-
-   /generator/CodeBlocks
-   /generator/CodeLite
-   /generator/Eclipse CDT4
-   /generator/KDevelop3
-   /generator/Kate
-   /generator/Sublime Text 2
diff --git a/share/cmake-3.2/Help/manual/cmake-language.7.rst b/share/cmake-3.2/Help/manual/cmake-language.7.rst
deleted file mode 100644
index 3e0297c..0000000
--- a/share/cmake-3.2/Help/manual/cmake-language.7.rst
+++ /dev/null
@@ -1,568 +0,0 @@
-.. cmake-manual-description: CMake Language Reference
-
-cmake-language(7)
-*****************
-
-.. only:: html
-
-   .. contents::
-
-Organization
-============
-
-CMake input files are written in the "CMake Language" in source files
-named ``CMakeLists.txt`` or ending in a ``.cmake`` file name extension.
-
-CMake Language source files in a project are organized into:
-
-* `Directories`_ (``CMakeLists.txt``),
-* `Scripts`_ (``<script>.cmake``), and
-* `Modules`_ (``<module>.cmake``).
-
-Directories
------------
-
-When CMake processes a project source tree, the entry point is
-a source file called ``CMakeLists.txt`` in the top-level source
-directory.  This file may contain the entire build specification
-or use the :command:`add_subdirectory` command to add subdirectories
-to the build.  Each subdirectory added by the command must also
-contain a ``CMakeLists.txt`` file as the entry point to that
-directory.  For each source directory whose ``CMakeLists.txt`` file
-is processed CMake generates a corresponding directory in the build
-tree to act as the default working and output directory.
-
-Scripts
--------
-
-An individual ``<script>.cmake`` source file may be processed
-in *script mode* by using the :manual:`cmake(1)` command-line tool
-with the ``-P`` option.  Script mode simply runs the commands in
-the given CMake Language source file and does not generate a
-build system.  It does not allow CMake commands that define build
-targets or actions.
-
-Modules
--------
-
-CMake Language code in either `Directories`_ or `Scripts`_ may
-use the :command:`include` command to load a ``<module>.cmake``
-source file in the scope of the including context.
-See the :manual:`cmake-modules(7)` manual page for documentation
-of modules included with the CMake distribution.
-Project source trees may also provide their own modules and
-specify their location(s) in the :variable:`CMAKE_MODULE_PATH`
-variable.
-
-Syntax
-======
-
-.. _`CMake Language Encoding`:
-
-Encoding
---------
-
-A CMake Language source file may be written in 7-bit ASCII text for
-maximum portability across all supported platforms.  Newlines may be
-encoded as either ``\n`` or ``\r\n`` but will be converted to ``\n``
-as input files are read.
-
-Note that the implementation is 8-bit clean so source files may
-be encoded as UTF-8 on platforms with system APIs supporting this
-encoding.  In addition, CMake 3.2 and above support source files
-encoded in UTF-8 on Windows (using UTF-16 to call system APIs).
-Furthermore, CMake 3.0 and above allow a leading UTF-8
-`Byte-Order Mark`_ in source files.
-
-.. _`Byte-Order Mark`: http://en.wikipedia.org/wiki/Byte_order_mark
-
-Source Files
-------------
-
-A CMake Language source file consists of zero or more
-`Command Invocations`_ separated by newlines and optionally
-spaces and `Comments`_:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- file: `file_element`*
- file_element: `command_invocation` `line_ending` |
-             : (`bracket_comment`|`space`)* `line_ending`
- line_ending: `line_comment`? `newline`
- space: <match '[ \t]+'>
- newline: <match '\n'>
-
-.. raw:: latex
-
-   \end{small}
-
-Note that any source file line not inside `Command Arguments`_ or
-a `Bracket Comment`_ can end in a `Line Comment`_.
-
-.. _`Command Invocations`:
-
-Command Invocations
--------------------
-
-A *command invocation* is a name followed by paren-enclosed arguments
-separated by whitespace:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- command_invocation: `space`* `identifier` `space`* '(' `arguments` ')'
- identifier: <match '[A-Za-z_][A-Za-z0-9_]*'>
- arguments: `argument`? `separated_arguments`*
- separated_arguments: `separation`+ `argument`? |
-                    : `separation`* '(' `arguments` ')'
- separation: `space` | `line_ending`
-
-.. raw:: latex
-
-   \end{small}
-
-For example:
-
-.. code-block:: cmake
-
- add_executable(hello world.c)
-
-Command names are case-insensitive.
-Nested unquoted parentheses in the arguments must balance.
-Each ``(`` or ``)`` is given to the command invocation as
-a literal `Unquoted Argument`_.  This may be used in calls
-to the :command:`if` command to enclose conditions.
-For example:
-
-.. code-block:: cmake
-
- if(FALSE AND (FALSE OR TRUE)) # evaluates to FALSE
-
-.. note::
- CMake versions prior to 3.0 require command name identifiers
- to be at least 2 characters.
-
- CMake versions prior to 2.8.12 silently accept an `Unquoted Argument`_
- or a `Quoted Argument`_ immediately following a `Quoted Argument`_ and
- not separated by any whitespace.  For compatibility, CMake 2.8.12 and
- higher accept such code but produce a warning.
-
-Command Arguments
------------------
-
-There are three types of arguments within `Command Invocations`_:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- argument: `bracket_argument` | `quoted_argument` | `unquoted_argument`
-
-.. raw:: latex
-
-   \end{small}
-
-.. _`Bracket Argument`:
-
-Bracket Argument
-^^^^^^^^^^^^^^^^
-
-A *bracket argument*, inspired by `Lua`_ long bracket syntax,
-encloses content between opening and closing "brackets" of the
-same length:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- bracket_argument: `bracket_open` `bracket_content` `bracket_close`
- bracket_open: '[' '='{len} '['
- bracket_content: <any text not containing a `bracket_close`
-                :  of the same {len} as the `bracket_open`>
- bracket_close: ']' '='{len} ']'
-
-.. raw:: latex
-
-   \end{small}
-
-An opening bracket of length *len >= 0* is written ``[`` followed
-by *len* ``=`` followed by ``[`` and the corresponding closing
-bracket is written ``]`` followed by *len* ``=`` followed by ``]``.
-Brackets do not nest.  A unique length may always be chosen
-for the opening and closing brackets to contain closing brackets
-of other lengths.
-
-Bracket argument content consists of all text between the opening
-and closing brackets, except that one newline immediately following
-the opening bracket, if any, is ignored.  No evaluation of the
-enclosed content, such as `Escape Sequences`_ or `Variable References`_,
-is performed.  A bracket argument is always given to the command
-invocation as exactly one argument.
-
-For example:
-
-.. code-block:: cmake
-
- message([=[
- This is the first line in a bracket argument with bracket length 1.
- No \-escape sequences or ${variable} references are evaluated.
- This is always one argument even though it contains a ; character.
- The text does not end on a closing bracket of length 0 like ]].
- It does end in a closing bracket of length 1.
- ]=])
-
-.. note::
- CMake versions prior to 3.0 do not support bracket arguments.
- They interpret the opening bracket as the start of an
- `Unquoted Argument`_.
-
-.. _`Lua`: http://www.lua.org/
-
-.. _`Quoted Argument`:
-
-Quoted Argument
-^^^^^^^^^^^^^^^
-
-A *quoted argument* encloses content between opening and closing
-double-quote characters:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- quoted_argument: '"' `quoted_element`* '"'
- quoted_element: <any character except '\' or '"'> |
-                 : `escape_sequence` |
-                 : `quoted_continuation`
- quoted_continuation: '\' `newline`
-
-.. raw:: latex
-
-   \end{small}
-
-Quoted argument content consists of all text between opening and
-closing quotes.  Both `Escape Sequences`_ and `Variable References`_
-are evaluated.  A quoted argument is always given to the command
-invocation as exactly one argument.
-
-For example:
-
-.. code-block:: cmake
-
- message("This is a quoted argument containing multiple lines.
- This is always one argument even though it contains a ; character.
- Both \\-escape sequences and ${variable} references are evaluated.
- The text does not end on an escaped double-quote like \".
- It does end in an unescaped double quote.
- ")
-
-The final ``\`` on any line ending in an odd number of backslashes
-is treated as a line continuation and ignored along with the
-immediately following newline character.  For example:
-
-.. code-block:: cmake
-
- message("\
- This is the first line of a quoted argument. \
- In fact it is the only line but since it is long \
- the source code uses line continuation.\
- ")
-
-.. note::
- CMake versions prior to 3.0 do not support continuation with ``\``.
- They report errors in quoted arguments containing lines ending in
- an odd number of ``\`` characters.
-
-.. _`Unquoted Argument`:
-
-Unquoted Argument
-^^^^^^^^^^^^^^^^^
-
-An *unquoted argument* is not enclosed by any quoting syntax.
-It may not contain any whitespace, ``(``, ``)``, ``#``, ``"``, or ``\``
-except when escaped by a backslash:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- unquoted_argument: `unquoted_element`+ | `unquoted_legacy`
- unquoted_element: <any character except whitespace or one of '()#"\'> |
-                 : `escape_sequence`
- unquoted_legacy: <see note in text>
-
-.. raw:: latex
-
-   \end{small}
-
-Unquoted argument content consists of all text in a contiguous block
-of allowed or escaped characters.  Both `Escape Sequences`_ and
-`Variable References`_ are evaluated.  The resulting value is divided
-in the same way `Lists`_ divide into elements.  Each non-empty element
-is given to the command invocation as an argument.  Therefore an
-unquoted argument may be given to a command invocation as zero or
-more arguments.
-
-For example:
-
-.. code-block:: cmake
-
- foreach(arg
-     NoSpace
-     Escaped\ Space
-     This;Divides;Into;Five;Arguments
-     Escaped\;Semicolon
-     )
-   message("${arg}")
- endforeach()
-
-.. note::
- To support legacy CMake code, unquoted arguments may also contain
- double-quoted strings (``"..."``, possibly enclosing horizontal
- whitespace), and make-style variable references (``$(MAKEVAR)``).
- Unescaped double-quotes must balance, may not appear at the
- beginning of an unquoted argument, and are treated as part of the
- content.  For example, the unquoted arguments ``-Da="b c"``,
- ``-Da=$(v)``, and ``a" "b"c"d`` are each interpreted literally.
-
- The above "unquoted_legacy" production represents such arguments.
- We do not recommend using legacy unquoted arguments in new code.
- Instead use a `Quoted Argument`_ or a `Bracket Argument`_ to
- represent the content.
-
-.. _`Escape Sequences`:
-
-Escape Sequences
-----------------
-
-An *escape sequence* is a ``\`` followed by one character:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- escape_sequence: `escape_identity` | `escape_encoded` | `escape_semicolon`
- escape_identity: '\' <match '[^A-Za-z0-9;]'>
- escape_encoded: '\t' | '\r' | '\n'
- escape_semicolon: '\;'
-
-.. raw:: latex
-
-   \end{small}
-
-A ``\`` followed by a non-alphanumeric character simply encodes the literal
-character without interpreting it as syntax.  A ``\t``, ``\r``, or ``\n``
-encodes a tab, carriage return, or newline character, respectively. A ``\;``
-outside of any `Variable References`_  encodes itself but may be used in an
-`Unquoted Argument`_ to encode the ``;`` without dividing the argument
-value on it.  A ``\;`` inside `Variable References`_ encodes the literal
-``;`` character.  (See also policy :policy:`CMP0053` documentation for
-historical considerations.)
-
-.. _`Variable References`:
-
-Variable References
--------------------
-
-A *variable reference* has the form ``${variable_name}`` and is
-evaluated inside a `Quoted Argument`_ or an `Unquoted Argument`_.
-A variable reference is replaced by the value of the variable,
-or by the empty string if the variable is not set.
-Variable references can nest and are evaluated from the
-inside out, e.g. ``${outer_${inner_variable}_variable}``.
-
-Literal variable references may consist of alphanumeric characters,
-the characters ``/_.+-``, and `Escape Sequences`_.  Nested references
-may be used to evaluate variables of any name.  (See also policy
-:policy:`CMP0053` documentation for historical considerations.)
-
-The `Variables`_ section documents the scope of variable names
-and how their values are set.
-
-An *environment variable reference* has the form ``$ENV{VAR}`` and
-is evaluated in the same contexts as a normal variable reference.
-
-Comments
---------
-
-A comment starts with a ``#`` character that is not inside a
-`Bracket Argument`_, `Quoted Argument`_, or escaped with ``\``
-as part of an `Unquoted Argument`_.  There are two types of
-comments: a `Bracket Comment`_ and a `Line Comment`_.
-
-.. _`Bracket Comment`:
-
-Bracket Comment
-^^^^^^^^^^^^^^^
-
-A ``#`` immediately followed by a `Bracket Argument`_ forms a
-*bracket comment* consisting of the entire bracket enclosure:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- bracket_comment: '#' `bracket_argument`
-
-.. raw:: latex
-
-   \end{small}
-
-For example:
-
-.. code-block:: cmake
-
- #[[This is a bracket comment.
- It runs until the close bracket.]]
- message("First Argument\n" #[[Bracket Comment]] "Second Argument")
-
-.. note::
- CMake versions prior to 3.0 do not support bracket comments.
- They interpret the opening ``#`` as the start of a `Line Comment`_.
-
-.. _`Line Comment`:
-
-Line Comment
-^^^^^^^^^^^^
-
-A ``#`` not immediately followed by a `Bracket Argument`_ forms a
-*line comment* that runs until the end of the line:
-
-.. raw:: latex
-
-   \begin{small}
-
-.. productionlist::
- line_comment: '#' <any text not starting in a `bracket_argument`
-             :      and not containing a `newline`>
-
-.. raw:: latex
-
-   \end{small}
-
-For example:
-
-.. code-block:: cmake
-
- # This is a line comment.
- message("First Argument\n" # This is a line comment :)
-         "Second Argument") # This is a line comment.
-
-Control Structures
-==================
-
-Conditional Blocks
-------------------
-
-The :command:`if`/:command:`elseif`/:command:`else`/:command:`endif`
-commands delimit code blocks to be executed conditionally.
-
-Loops
------
-
-The :command:`foreach`/:command:`endforeach` and
-:command:`while`/:command:`endwhile` commands delimit code
-blocks to be executed in a loop.  Inside such blocks the
-:command:`break` command may be used to terminate the loop
-early whereas the :command:`continue` command may be used
-to start with the next iteration immediately.
-
-Command Definitions
--------------------
-
-The :command:`macro`/:command:`endmacro`, and
-:command:`function`/:command:`endfunction` commands delimit
-code blocks to be recorded for later invocation as commands.
-
-Variables
-=========
-
-Variables are the basic unit of storage in the CMake Language.
-Their values are always of string type, though some commands may
-interpret the strings as values of other types.
-The :command:`set` and :command:`unset` commands explicitly
-set or unset a variable, but other commands have semantics
-that modify variables as well.
-Variable names are case-sensitive and may consist of almost
-any text, but we recommend sticking to names consisting only
-of alphanumeric characters plus ``_`` and ``-``.
-
-Variables have dynamic scope.  Each variable "set" or "unset"
-creates a binding in the current scope:
-
-Function Scope
- `Command Definitions`_ created by the :command:`function` command
- create commands that, when invoked, process the recorded commands
- in a new variable binding scope.  A variable "set" or "unset"
- binds in this scope and is visible for the current function and
- any nested calls, but not after the function returns.
-
-Directory Scope
- Each of the `Directories`_ in a source tree has its own variable
- bindings.  Before processing the ``CMakeLists.txt`` file for a
- directory, CMake copies all variable bindings currently defined
- in the parent directory, if any, to initialize the new directory
- scope.  CMake `Scripts`_, when processed with ``cmake -P``, bind
- variables in one "directory" scope.
-
- A variable "set" or "unset" not inside a function call binds
- to the current directory scope.
-
-Persistent Cache
- CMake stores a separate set of "cache" variables, or "cache entries",
- whose values persist across multiple runs within a project build
- tree.  Cache entries have an isolated binding scope modified only
- by explicit request, such as by the ``CACHE`` option of the
- :command:`set` and :command:`unset` commands.
-
-When evaluating `Variable References`_, CMake first searches the
-function call stack, if any, for a binding and then falls back
-to the binding in the current directory scope, if any.  If a
-"set" binding is found, its value is used.  If an "unset" binding
-is found, or no binding is found, CMake then searches for a
-cache entry.  If a cache entry is found, its value is used.
-Otherwise, the variable reference evaluates to an empty string.
-
-The :manual:`cmake-variables(7)` manual documents many variables
-that are provided by CMake or have meaning to CMake when set
-by project code.
-
-Lists
-=====
-
-Although all values in CMake are stored as strings, a string
-may be treated as a list in certain contexts, such as during
-evaluation of an `Unquoted Argument`_.  In such contexts, a string
-is divided into list elements by splitting on ``;`` characters not
-following an unequal number of ``[`` and ``]`` characters and not
-immediately preceded by a ``\``.  The sequence ``\;`` does not
-divide a value but is replaced by ``;`` in the resulting element.
-
-A list of elements is represented as a string by concatenating
-the elements separated by ``;``.  For example, the :command:`set`
-command stores multiple values into the destination variable
-as a list:
-
-.. code-block:: cmake
-
- set(srcs a.c b.c c.c) # sets "srcs" to "a.c;b.c;c.c"
-
-Lists are meant for simple use cases such as a list of source
-files and should not be used for complex data processing tasks.
-Most commands that construct lists do not escape ``;`` characters
-in list elements, thus flattening nested lists:
-
-.. code-block:: cmake
-
- set(x a "b;c") # sets "x" to "a;b;c", not "a;b\;c"
diff --git a/share/cmake-3.2/Help/manual/cmake-modules.7.rst b/share/cmake-3.2/Help/manual/cmake-modules.7.rst
deleted file mode 100644
index 965eede..0000000
--- a/share/cmake-3.2/Help/manual/cmake-modules.7.rst
+++ /dev/null
@@ -1,242 +0,0 @@
-.. cmake-manual-description: CMake Modules Reference
-
-cmake-modules(7)
-****************
-
-.. only:: html
-
-   .. contents::
-
-All Modules
-===========
-
-.. toctree::
-   :maxdepth: 1
-
-   /module/AddFileDependencies
-   /module/BundleUtilities
-   /module/CheckCCompilerFlag
-   /module/CheckCSourceCompiles
-   /module/CheckCSourceRuns
-   /module/CheckCXXCompilerFlag
-   /module/CheckCXXSourceCompiles
-   /module/CheckCXXSourceRuns
-   /module/CheckCXXSymbolExists
-   /module/CheckFortranFunctionExists
-   /module/CheckFortranSourceCompiles
-   /module/CheckFunctionExists
-   /module/CheckIncludeFileCXX
-   /module/CheckIncludeFile
-   /module/CheckIncludeFiles
-   /module/CheckLanguage
-   /module/CheckLibraryExists
-   /module/CheckPrototypeDefinition
-   /module/CheckStructHasMember
-   /module/CheckSymbolExists
-   /module/CheckTypeSize
-   /module/CheckVariableExists
-   /module/CMakeAddFortranSubdirectory
-   /module/CMakeBackwardCompatibilityCXX
-   /module/CMakeDependentOption
-   /module/CMakeDetermineVSServicePack
-   /module/CMakeExpandImportedTargets
-   /module/CMakeFindDependencyMacro
-   /module/CMakeFindFrameworks
-   /module/CMakeFindPackageMode
-   /module/CMakeForceCompiler
-   /module/CMakeGraphVizOptions
-   /module/CMakePackageConfigHelpers
-   /module/CMakeParseArguments
-   /module/CMakePrintHelpers
-   /module/CMakePrintSystemInformation
-   /module/CMakePushCheckState
-   /module/CMakeVerifyManifest
-   /module/CPackBundle
-   /module/CPackComponent
-   /module/CPackCygwin
-   /module/CPackDeb
-   /module/CPackDMG
-   /module/CPackIFW
-   /module/CPackNSIS
-   /module/CPackPackageMaker
-   /module/CPackRPM
-   /module/CPack
-   /module/CPackWIX
-   /module/CTest
-   /module/CTestCoverageCollectGCOV
-   /module/CTestScriptMode
-   /module/CTestUseLaunchers
-   /module/Dart
-   /module/DeployQt4
-   /module/Documentation
-   /module/ExternalData
-   /module/ExternalProject
-   /module/FeatureSummary
-   /module/FindALSA
-   /module/FindArmadillo
-   /module/FindASPELL
-   /module/FindAVIFile
-   /module/FindBISON
-   /module/FindBLAS
-   /module/FindBacktrace
-   /module/FindBoost
-   /module/FindBullet
-   /module/FindBZip2
-   /module/FindCABLE
-   /module/FindCoin3D
-   /module/FindCUDA
-   /module/FindCups
-   /module/FindCURL
-   /module/FindCurses
-   /module/FindCVS
-   /module/FindCxxTest
-   /module/FindCygwin
-   /module/FindDart
-   /module/FindDCMTK
-   /module/FindDevIL
-   /module/FindDoxygen
-   /module/FindEXPAT
-   /module/FindFLEX
-   /module/FindFLTK2
-   /module/FindFLTK
-   /module/FindFreetype
-   /module/FindGCCXML
-   /module/FindGDAL
-   /module/FindGettext
-   /module/FindGIF
-   /module/FindGit
-   /module/FindGLEW
-   /module/FindGLUT
-   /module/FindGnuplot
-   /module/FindGnuTLS
-   /module/FindGSL
-   /module/FindGTest
-   /module/FindGTK2
-   /module/FindGTK
-   /module/FindHDF5
-   /module/FindHg
-   /module/FindHSPELL
-   /module/FindHTMLHelp
-   /module/FindIce
-   /module/FindIcotool
-   /module/FindImageMagick
-   /module/FindIntl
-   /module/FindITK
-   /module/FindJasper
-   /module/FindJava
-   /module/FindJNI
-   /module/FindJPEG
-   /module/FindKDE3
-   /module/FindKDE4
-   /module/FindLAPACK
-   /module/FindLATEX
-   /module/FindLibArchive
-   /module/FindLibLZMA
-   /module/FindLibXml2
-   /module/FindLibXslt
-   /module/FindLua50
-   /module/FindLua51
-   /module/FindLua
-   /module/FindMatlab
-   /module/FindMFC
-   /module/FindMotif
-   /module/FindMPEG2
-   /module/FindMPEG
-   /module/FindMPI
-   /module/FindOpenAL
-   /module/FindOpenCL
-   /module/FindOpenGL
-   /module/FindOpenMP
-   /module/FindOpenSceneGraph
-   /module/FindOpenSSL
-   /module/FindOpenThreads
-   /module/FindosgAnimation
-   /module/FindosgDB
-   /module/Findosg_functions
-   /module/FindosgFX
-   /module/FindosgGA
-   /module/FindosgIntrospection
-   /module/FindosgManipulator
-   /module/FindosgParticle
-   /module/FindosgPresentation
-   /module/FindosgProducer
-   /module/FindosgQt
-   /module/Findosg
-   /module/FindosgShadow
-   /module/FindosgSim
-   /module/FindosgTerrain
-   /module/FindosgText
-   /module/FindosgUtil
-   /module/FindosgViewer
-   /module/FindosgVolume
-   /module/FindosgWidget
-   /module/FindPackageHandleStandardArgs
-   /module/FindPackageMessage
-   /module/FindPerlLibs
-   /module/FindPerl
-   /module/FindPHP4
-   /module/FindPhysFS
-   /module/FindPike
-   /module/FindPkgConfig
-   /module/FindPNG
-   /module/FindPostgreSQL
-   /module/FindProducer
-   /module/FindProtobuf
-   /module/FindPythonInterp
-   /module/FindPythonLibs
-   /module/FindQt3
-   /module/FindQt4
-   /module/FindQt
-   /module/FindQuickTime
-   /module/FindRTI
-   /module/FindRuby
-   /module/FindSDL_image
-   /module/FindSDL_mixer
-   /module/FindSDL_net
-   /module/FindSDL
-   /module/FindSDL_sound
-   /module/FindSDL_ttf
-   /module/FindSelfPackers
-   /module/FindSquish
-   /module/FindSubversion
-   /module/FindSWIG
-   /module/FindTCL
-   /module/FindTclsh
-   /module/FindTclStub
-   /module/FindThreads
-   /module/FindTIFF
-   /module/FindUnixCommands
-   /module/FindVTK
-   /module/FindWget
-   /module/FindWish
-   /module/FindwxWidgets
-   /module/FindwxWindows
-   /module/FindXercesC
-   /module/FindX11
-   /module/FindXMLRPC
-   /module/FindZLIB
-   /module/FortranCInterface
-   /module/GenerateExportHeader
-   /module/GetPrerequisites
-   /module/GNUInstallDirs
-   /module/InstallRequiredSystemLibraries
-   /module/MacroAddFileDependencies
-   /module/ProcessorCount
-   /module/SelectLibraryConfigurations
-   /module/SquishTestScript
-   /module/TestBigEndian
-   /module/TestCXXAcceptsFlag
-   /module/TestForANSIForScope
-   /module/TestForANSIStreamHeaders
-   /module/TestForSSTREAM
-   /module/TestForSTDNamespace
-   /module/UseEcos
-   /module/UseJavaClassFilelist
-   /module/UseJava
-   /module/UseJavaSymlinks
-   /module/UsePkgConfig
-   /module/UseSWIG
-   /module/UsewxWidgets
-   /module/Use_wxWindows
-   /module/WriteBasicConfigVersionFile
-   /module/WriteCompilerDetectionHeader
diff --git a/share/cmake-3.2/Help/manual/cmake-packages.7.rst b/share/cmake-3.2/Help/manual/cmake-packages.7.rst
deleted file mode 100644
index 3367ba4..0000000
--- a/share/cmake-3.2/Help/manual/cmake-packages.7.rst
+++ /dev/null
@@ -1,671 +0,0 @@
-.. cmake-manual-description: CMake Packages Reference
-
-cmake-packages(7)
-*****************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-Packages provide dependency information to CMake based buildsystems.  Packages
-are found with the :command:`find_package` command.  The result of
-using ``find_package`` is either a set of :prop_tgt:`IMPORTED` targets, or
-a set of variables corresponding to build-relevant information.
-
-Using Packages
-==============
-
-CMake provides direct support for two forms of packages,
-`Config-file Packages`_ and `Find-module Packages`_.
-Indirect support for ``pkg-config`` packages is also provided via
-the :module:`FindPkgConfig` module.  In all cases, the basic form
-of :command:`find_package` calls is the same:
-
-.. code-block:: cmake
-
-  find_package(Qt4 4.7.0 REQUIRED) # CMake provides a Qt4 find-module
-  find_package(Qt5Core 5.1.0 REQUIRED) # Qt provides a Qt5 package config file.
-  find_package(LibXml2 REQUIRED) # Use pkg-config via the LibXml2 find-module
-
-In cases where it is known that a package configuration file is provided by
-upstream, and only that should be used, the ``CONFIG`` keyword may be passed
-to :command:`find_package`:
-
-.. code-block:: cmake
-
-  find_package(Qt5Core 5.1.0 CONFIG REQUIRED)
-  find_package(Qt5Gui 5.1.0 CONFIG)
-
-Similarly, the ``MODULE`` keyword says to use only a find-module:
-
-.. code-block:: cmake
-
-  find_package(Qt4 4.7.0 MODULE REQUIRED)
-
-Specifying the type of package explicitly improves the error message shown to
-the user if it is not found.
-
-Both types of packages also support specifying components of a package,
-either after the ``REQUIRED`` keyword:
-
-.. code-block:: cmake
-
-  find_package(Qt5 5.1.0 CONFIG REQUIRED Widgets Xml Sql)
-
-or as a separate ``COMPONENTS`` list:
-
-.. code-block:: cmake
-
-  find_package(Qt5 5.1.0 COMPONENTS Widgets Xml Sql)
-
-or as a separate ``OPTIONAL_COMPONENTS`` list:
-
-.. code-block:: cmake
-
-  find_package(Qt5 5.1.0 COMPONENTS Widgets
-                         OPTIONAL_COMPONENTS Xml Sql
-  )
-
-Handling of ``COMPONENTS`` and ``OPTIONAL_COMPONENTS`` is defined by the
-package.
-
-By setting the :variable:`CMAKE_DISABLE_FIND_PACKAGE_<PackageName>` variable to
-``TRUE``, the ``PackageName`` package will not be searched, and will always
-be ``NOTFOUND``.
-
-.. _`Config File Packages`:
-
-Config-file Packages
---------------------
-
-A config-file package is a set of files provided by upstreams for downstreams
-to use. CMake searches in a number of locations for package configuration files, as
-described in the :command:`find_package` documentation.  The most simple way for
-a CMake user to tell :manual:`cmake(1)` to search in a non-standard prefix for
-a package is to set the ``CMAKE_PREFIX_PATH`` cache variable.
-
-Config-file packages are provided by upstream vendors as part of development
-packages, that is, they belong with the header files and any other files
-provided to assist downsteams in using the package.
-
-A set of variables which provide package status information are also set
-automatically when using a config-file package.  The ``<Package>_FOUND``
-variable is set to true or false, depending on whether the package was
-found.  The ``<Package>_DIR`` cache variable is set to the location of the
-package configuration file.
-
-Find-module Packages
---------------------
-
-A find module is a file with a set of rules for finding the required pieces of
-a dependency, primarily header files and libraries.  Typically, a find module
-is needed when the upstream is not built with CMake, or is not CMake-aware
-enough to otherwise provide a package configuration file.  Unlike a package configuration
-file, it is not shipped with upstream, but is used by downstream to find the
-files by guessing locations of files with platform-specific hints.
-
-Unlike the case of an upstream-provided package configuration file, no single point
-of reference identifies the package as being found, so the ``<Package>_FOUND``
-variable is not automatically set by the :command:`find_package` command.  It
-can still be expected to be set by convention however and should be set by
-the author of the Find-module.  Similarly there is no ``<Package>_DIR`` variable,
-but each of the artifacts such as library locations and header file locations
-provide a separate cache variable.
-
-See the :manual:`cmake-developer(7)` manual for more information about creating
-Find-module files.
-
-Package Layout
-==============
-
-A config-file package consists of a `Package Configuration File`_ and
-optionally a `Package Version File`_ provided with the project distribution.
-
-Package Configuration File
---------------------------
-
-Consider a project ``Foo`` that installs the following files::
-
-  <prefix>/include/foo-1.2/foo.h
-  <prefix>/lib/foo-1.2/libfoo.a
-
-It may also provide a CMake package configuration file::
-
-  <prefix>/lib/cmake/foo-1.2/FooConfig.cmake
-
-with content defining :prop_tgt:`IMPORTED` targets, or defining variables, such
-as:
-
-.. code-block:: cmake
-
-  # ...
-  # (compute PREFIX relative to file location)
-  # ...
-  set(Foo_INCLUDE_DIRS ${PREFIX}/include/foo-1.2)
-  set(Foo_LIBRARIES ${PREFIX}/lib/foo-1.2/libfoo.a)
-
-If another project wishes to use ``Foo`` it need only to locate the ``FooConfig.cmake``
-file and load it to get all the information it needs about package content
-locations.  Since the package configuration file is provided by the package
-installation it already knows all the file locations.
-
-The :command:`find_package` command may be used to search for the package
-configuration file.  This command constructs a set of installation prefixes
-and searches under each prefix in several locations.  Given the name ``Foo``,
-it looks for a file called ``FooConfig.cmake`` or ``foo-config.cmake``.
-The full set of locations is specified in the :command:`find_package` command
-documentation. One place it looks is::
-
- <prefix>/lib/cmake/Foo*/
-
-where ``Foo*`` is a case-insensitive globbing expression.  In our example the
-globbing expression will match ``<prefix>/lib/cmake/foo-1.2`` and the package
-configuration file will be found.
-
-Once found, a package configuration file is immediately loaded.  It, together
-with a package version file, contains all the information the project needs to
-use the package.
-
-Package Version File
---------------------
-
-When the :command:`find_package` command finds a candidate package configuration
-file it looks next to it for a version file. The version file is loaded to test
-whether the package version is an acceptable match for the version requested.
-If the version file claims compatibility the configuration file is accepted.
-Otherwise it is ignored.
-
-The name of the package version file must match that of the package configuration
-file but has either ``-version`` or ``Version`` appended to the name before
-the ``.cmake`` extension.  For example, the files::
-
- <prefix>/lib/cmake/foo-1.3/foo-config.cmake
- <prefix>/lib/cmake/foo-1.3/foo-config-version.cmake
-
-and::
-
- <prefix>/lib/cmake/bar-4.2/BarConfig.cmake
- <prefix>/lib/cmake/bar-4.2/BarConfigVersion.cmake
-
-are each pairs of package configuration files and corresponding package version
-files.
-
-When the :command:`find_package` command loads a version file it first sets the
-following variables:
-
-``PACKAGE_FIND_NAME``
- The <package> name
-
-``PACKAGE_FIND_VERSION``
- Full requested version string
-
-``PACKAGE_FIND_VERSION_MAJOR``
- Major version if requested, else 0
-
-``PACKAGE_FIND_VERSION_MINOR``
- Minor version if requested, else 0
-
-``PACKAGE_FIND_VERSION_PATCH``
- Patch version if requested, else 0
-
-``PACKAGE_FIND_VERSION_TWEAK``
- Tweak version if requested, else 0
-
-``PACKAGE_FIND_VERSION_COUNT``
- Number of version components, 0 to 4
-
-The version file must use these variables to check whether it is compatible or
-an exact match for the requested version and set the following variables with
-results:
-
-``PACKAGE_VERSION``
- Full provided version string
-
-``PACKAGE_VERSION_EXACT``
- True if version is exact match
-
-``PACKAGE_VERSION_COMPATIBLE``
- True if version is compatible
-
-``PACKAGE_VERSION_UNSUITABLE``
- True if unsuitable as any version
-
-Version files are loaded in a nested scope so they are free to set any variables
-they wish as part of their computation. The find_package command wipes out the
-scope when the version file has completed and it has checked the output
-variables. When the version file claims to be an acceptable match for the
-requested version the find_package command sets the following variables for
-use by the project:
-
-``<package>_VERSION``
- Full provided version string
-
-``<package>_VERSION_MAJOR``
- Major version if provided, else 0
-
-``<package>_VERSION_MINOR``
- Minor version if provided, else 0
-
-``<package>_VERSION_PATCH``
- Patch version if provided, else 0
-
-``<package>_VERSION_TWEAK``
- Tweak version if provided, else 0
-
-``<package>_VERSION_COUNT``
- Number of version components, 0 to 4
-
-The variables report the version of the package that was actually found.
-The ``<package>`` part of their name matches the argument given to the
-:command:`find_package` command.
-
-.. _`Creating Packages`:
-
-Creating Packages
-=================
-
-Usually, the upstream depends on CMake itself and can use some CMake facilities
-for creating the package files. Consider an upstream which provides a single
-shared library:
-
-.. code-block:: cmake
-
-  project(UpstreamLib)
-
-  set(CMAKE_INCLUDE_CURRENT_DIR ON)
-  set(CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE ON)
-
-  set(Upstream_VERSION 3.4.1)
-
-  include(GenerateExportHeader)
-
-  add_library(ClimbingStats SHARED climbingstats.cpp)
-  generate_export_header(ClimbingStats)
-  set_property(TARGET ClimbingStats PROPERTY VERSION ${Upstream_VERSION})
-  set_property(TARGET ClimbingStats PROPERTY SOVERSION 3)
-  set_property(TARGET ClimbingStats PROPERTY
-    INTERFACE_ClimbingStats_MAJOR_VERSION 3)
-  set_property(TARGET ClimbingStats APPEND PROPERTY
-    COMPATIBLE_INTERFACE_STRING ClimbingStats_MAJOR_VERSION
-  )
-
-  install(TARGETS ClimbingStats EXPORT ClimbingStatsTargets
-    LIBRARY DESTINATION lib
-    ARCHIVE DESTINATION lib
-    RUNTIME DESTINATION bin
-    INCLUDES DESTINATION include
-  )
-  install(
-    FILES
-      climbingstats.h
-      "${CMAKE_CURRENT_BINARY_DIR}/climbingstats_export.h"
-    DESTINATION
-      include
-    COMPONENT
-      Devel
-  )
-
-  include(CMakePackageConfigHelpers)
-  write_basic_package_version_file(
-    "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfigVersion.cmake"
-    VERSION ${Upstream_VERSION}
-    COMPATIBILITY AnyNewerVersion
-  )
-
-  export(EXPORT ClimbingStatsTargets
-    FILE "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsTargets.cmake"
-    NAMESPACE Upstream::
-  )
-  configure_file(cmake/ClimbingStatsConfig.cmake
-    "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfig.cmake"
-    COPYONLY
-  )
-
-  set(ConfigPackageLocation lib/cmake/ClimbingStats)
-  install(EXPORT ClimbingStatsTargets
-    FILE
-      ClimbingStatsTargets.cmake
-    NAMESPACE
-      Upstream::
-    DESTINATION
-      ${ConfigPackageLocation}
-  )
-  install(
-    FILES
-      cmake/ClimbingStatsConfig.cmake
-      "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfigVersion.cmake"
-    DESTINATION
-      ${ConfigPackageLocation}
-    COMPONENT
-      Devel
-  )
-
-The :module:`CMakePackageConfigHelpers` module provides a macro for creating
-a simple ``ConfigVersion.cmake`` file.  This file sets the version of the
-package.  It is read by CMake when :command:`find_package` is called to
-determine the compatibility with the requested version, and to set some
-version-specific variables ``<Package>_VERSION``, ``<Package>_VERSION_MAJOR``,
-``<Package>_VERSION_MINOR`` etc.  The :command:`install(EXPORT)` command is
-used to export the targets in the ``ClimbingStatsTargets`` export-set, defined
-previously by the :command:`install(TARGETS)` command. This command generates
-the ``ClimbingStatsTargets.cmake`` file to contain :prop_tgt:`IMPORTED`
-targets, suitable for use by downsteams and arranges to install it to
-``lib/cmake/ClimbingStats``.  The generated ``ClimbingStatsConfigVersion.cmake``
-and a ``cmake/ClimbingStatsConfig.cmake`` are installed to the same location,
-completing the package.
-
-The generated :prop_tgt:`IMPORTED` targets have appropriate properties set
-to define their :ref:`usage requirements <Target Usage Requirements>`, such as
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
-:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS` and other relevant built-in
-``INTERFACE_`` properties.  The ``INTERFACE`` variant of user-defined
-properties listed in :prop_tgt:`COMPATIBLE_INTERFACE_STRING` and
-other :ref:`Compatible Interface Properties` are also propagated to the
-generated :prop_tgt:`IMPORTED` targets.  In the above case,
-``ClimbingStats_MAJOR_VERSION`` is defined as a string which must be
-compatible among the dependencies of any depender.  By setting this custom
-defined user property in this version and in the next version of
-``ClimbingStats``, :manual:`cmake(1)` will issue a diagnostic if there is an
-attempt to use version 3 together with version 4.  Packages can choose to
-employ such a pattern if different major versions of the package are designed
-to be incompatible.
-
-Note that it is not advisable to populate any properties which may contain
-paths, such as :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` and
-:prop_tgt:`INTERFACE_LINK_LIBRARIES`, with paths relevnt to dependencies.
-That would hard-code into installed packages the include directory or library
-paths for dependencies **as found on the machine the package was made on**.
-
-That is, code like this is incorrect for targets which will be used to
-generate config file packages:
-
-.. code-block:: cmake
-
-  target_link_libraries(ClimbingStats INTERFACE
-    ${Boost_LIBRARIES};${OtherDep_LIBRARIES}>
-  )
-  target_include_directories(ClimbingStats INTERFACE
-    $<INSTALL_INTERFACE:${Boost_INCLUDE_DIRS};${OtherDep_INCLUDE_DIRS}>
-  )
-
-Dependencies must provide their own :ref:`IMPORTED targets <Imported Targets>`
-which have their own :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` and
-:prop_tgt:`IMPORTED_LOCATION` populated appropriately.  Those
-:ref:`IMPORTED targets <Imported Targets>` may then be
-used with the :command:`target_link_libraries` command for ``ClimbingStats``.
-
-That way, when a consumer uses the installed package, the
-consumer will run the appropriate :command:`find_package` command (via the
-find_dependency macro described below) to find
-the dependencies on their own machine and populate the
-:ref:`IMPORTED targets <Imported Targets>` with appropriate paths. Note that
-many modules currently shipped with CMake do not currently provide
-:ref:`IMPORTED targets <Imported Targets>`.
-
-A ``NAMESPACE`` with double-colons is specified when exporting the targets
-for installation.  This convention of double-colons gives CMake a hint that
-the name is an :prop_tgt:`IMPORTED` target when it is used by downstreams
-with the :command:`target_link_libraries` command.  This way, CMake can
-issue a diagnostic if the package providing it has not yet been found.
-
-In this case, when using :command:`install(TARGETS)` the ``INCLUDES DESTINATION``
-was specified.  This causes the ``IMPORTED`` targets to have their
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` populated with the ``include``
-directory in the :variable:`CMAKE_INSTALL_PREFIX`.  When the ``IMPORTED``
-target is used by downsteam, it automatically consumes the entries from
-that property.
-
-In this case, the ``ClimbingStatsConfig.cmake`` file could be as simple as:
-
-.. code-block:: cmake
-
-  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
-
-As this allows downstreams to use the ``IMPORTED`` targets.  If any macros
-should be provided by the ``ClimbingStats`` package, they should
-be in a separate file which is installed to the same location as the
-``ClimbingStatsConfig.cmake`` file, and included from there.
-
-Packages created by :command:`install(EXPORT)` are designed to be relocatable,
-using paths relative to the location of the package itself.  When defining
-the interface of a target for ``EXPORT``, keep in mind that the include
-directories should be specified as relative paths which are relative to the
-:variable:`CMAKE_INSTALL_PREFIX`:
-
-.. code-block:: cmake
-
-  target_include_directories(tgt INTERFACE
-    # Wrong, not relocatable:
-    $<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include/TgtName>
-  )
-
-  target_include_directories(tgt INTERFACE
-    # Ok, relocatable:
-    $<INSTALL_INTERFACE:include/TgtName>
-  )
-
-The ``$<INSTALL_PREFIX>``
-:manual:`generator expression <cmake-generator-expressions(7)>` may be used as
-a placeholder for the install prefix without resulting in a non-relocatable
-package.  This is necessary if complex generator expressions are used:
-
-.. code-block:: cmake
-
-  target_include_directories(tgt INTERFACE
-    # Ok, relocatable:
-    $<INSTALL_INTERFACE:$<$<CONFIG:Debug>:$<INSTALL_PREFIX>/include/TgtName>>
-  )
-
-The :command:`export(EXPORT)` command creates an :prop_tgt:`IMPORTED` targets
-definition file which is specific to the build-tree, and is not relocatable.
-This can similiarly be used with a suitable package configuration file and
-package version file to define a package for the build tree which may be used
-without installation.  Consumers of the build tree can simply ensure that the
-:variable:`CMAKE_PREFIX_PATH` contains the build directory, or set the
-``ClimbingStats_DIR`` to ``<build_dir>/ClimbingStats`` in the cache.
-
-This can also be extended to cover dependencies:
-
-.. code-block:: cmake
-
-  # ...
-  add_library(ClimbingStats SHARED climbingstats.cpp)
-  generate_export_header(ClimbingStats)
-
-  find_package(Stats 2.6.4 REQUIRED)
-  target_link_libraries(ClimbingStats PUBLIC Stats::Types)
-
-As the ``Stats::Types`` target is a ``PUBLIC`` dependency of ``ClimbingStats``,
-downsteams must also find the ``Stats`` package and link to the ``Stats::Types``
-library.  The ``Stats`` package should be found in the ``ClimbingStatsConfig.cmake``
-file to ensure this.  The ``find_dependency`` macro from the
-:module:`CMakeFindDependencyMacro` helps with this by propagating
-whether the package is ``REQUIRED``, or ``QUIET`` etc.  All ``REQUIRED``
-dependencies of a package should be found in the ``Config.cmake`` file:
-
-.. code-block:: cmake
-
-  include(CMakeFindDependencyMacro)
-  find_dependency(Stats 2.6.4)
-
-  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
-  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsMacros.cmake")
-
-The ``find_dependency`` macro also sets ``ClimbingStats_FOUND`` to ``False`` if
-the dependency is not found, along with a diagnostic that the ``ClimbingStats``
-package can not be used without the ``Stats`` package.
-
-If ``COMPONENTS`` are specified when the downstream uses :command:`find_package`,
-they are listed in the ``<Package>_FIND_COMPONENTS`` variable. If a particular
-component is non-optional, then the ``<Package>_FIND_REQUIRED_<comp>`` will
-be true. This can be tested with logic in the package configuration file:
-
-.. code-block:: cmake
-
-  include(CMakeFindDependencyMacro)
-  find_dependency(Stats 2.6.4)
-
-  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
-  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsMacros.cmake")
-
-  set(_supported_components Plot Table)
-
-  foreach(_comp ${ClimbingStats_FIND_COMPONENTS})
-    if (NOT ";${_supported_components};" MATCHES _comp)
-      set(ClimbingStats_FOUND False)
-      set(ClimbingStats_NOTFOUND_MESSAGE "Unsupported component: ${_comp}")
-    endif()
-    include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStats${_comp}Targets.cmake")
-  endforeach()
-
-Here, the ``ClimbingStats_NOTFOUND_MESSAGE`` is set to a diagnosis that the package
-could not be found because an invalid component was specified.  This message
-variable can be set for any case where the ``_FOUND`` variable is set to ``False``,
-and will be displayed to the user.
-
-.. _`Package Registry`:
-
-Package Registry
-================
-
-CMake provides two central locations to register packages that have
-been built or installed anywhere on a system:
-
-* `User Package Registry`_
-* `System Package Registry`_
-
-The registries are especially useful to help projects find packages in
-non-standard install locations or directly in their own build trees.
-A project may populate either the user or system registry (using its own
-means, see below) to refer to its location.
-In either case the package should store at the registered location a
-`Package Configuration File`_ (``<package>Config.cmake``) and optionally a
-`Package Version File`_ (``<package>ConfigVersion.cmake``).
-
-The :command:`find_package` command searches the two package registries
-as two of the search steps specified in its documentation.  If it has
-sufficient permissions it also removes stale package registry entries
-that refer to directories that do not exist or do not contain a matching
-package configuration file.
-
-.. _`User Package Registry`:
-
-User Package Registry
----------------------
-
-The User Package Registry is stored in a per-user location.
-The :command:`export(PACKAGE)` command may be used to register a project
-build tree in the user package registry.  CMake currently provides no
-interface to add install trees to the user package registry.  Installers
-must be manually taught to register their packages if desired.
-
-On Windows the user package registry is stored in the Windows registry
-under a key in ``HKEY_CURRENT_USER``.
-
-A ``<package>`` may appear under registry key::
-
-  HKEY_CURRENT_USER\Software\Kitware\CMake\Packages\<package>
-
-as a ``REG_SZ`` value, with arbitrary name, that specifies the directory
-containing the package configuration file.
-
-On UNIX platforms the user package registry is stored in the user home
-directory under ``~/.cmake/packages``.  A ``<package>`` may appear under
-the directory::
-
-  ~/.cmake/packages/<package>
-
-as a file, with arbitrary name, whose content specifies the directory
-containing the package configuration file.
-
-.. _`System Package Registry`:
-
-System Package Registry
------------------------
-
-The System Package Registry is stored in a system-wide location.
-CMake currently provides no interface to add to the system package registry.
-Installers must be manually taught to register their packages if desired.
-
-On Windows the system package registry is stored in the Windows registry
-under a key in ``HKEY_LOCAL_MACHINE``.  A ``<package>`` may appear under
-registry key::
-
-  HKEY_LOCAL_MACHINE\Software\Kitware\CMake\Packages\<package>
-
-as a ``REG_SZ`` value, with arbitrary name, that specifies the directory
-containing the package configuration file.
-
-There is no system package registry on non-Windows platforms.
-
-.. _`Disabling the Package Registry`:
-
-Disabling the Package Registry
-------------------------------
-
-In some cases using the Package Registries is not desirable. CMake
-allows to disable them using the following variables:
-
- * :variable:`CMAKE_EXPORT_NO_PACKAGE_REGISTRY` disables the
-   :command:`export(PACKAGE)` command.
- * :variable:`CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY` disables the
-   User Package Registry in all the :command:`find_package` calls.
- * :variable:`CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY` disables
-   the System Package Registry in all the :command:`find_package` calls.
-
-Package Registry Example
-------------------------
-
-A simple convention for naming package registry entries is to use content
-hashes.  They are deterministic and unlikely to collide
-(:command:`export(PACKAGE)` uses this approach).
-The name of an entry referencing a specific directory is simply the content
-hash of the directory path itself.
-
-If a project arranges for package registry entries to exist, such as::
-
- > reg query HKCU\Software\Kitware\CMake\Packages\MyPackage
- HKEY_CURRENT_USER\Software\Kitware\CMake\Packages\MyPackage
-  45e7d55f13b87179bb12f907c8de6fc4 REG_SZ c:/Users/Me/Work/lib/cmake/MyPackage
-  7b4a9844f681c80ce93190d4e3185db9 REG_SZ c:/Users/Me/Work/MyPackage-build
-
-or::
-
- $ cat ~/.cmake/packages/MyPackage/7d1fb77e07ce59a81bed093bbee945bd
- /home/me/work/lib/cmake/MyPackage
- $ cat ~/.cmake/packages/MyPackage/f92c1db873a1937f3100706657c63e07
- /home/me/work/MyPackage-build
-
-then the ``CMakeLists.txt`` code:
-
-.. code-block:: cmake
-
-  find_package(MyPackage)
-
-will search the registered locations for package configuration files
-(``MyPackageConfig.cmake``).  The search order among package registry
-entries for a single package is unspecified and the entry names
-(hashes in this example) have no meaning.  Registered locations may
-contain package version files (``MyPackageConfigVersion.cmake``) to
-tell :command:`find_package` whether a specific location is suitable
-for the version requested.
-
-Package Registry Ownership
---------------------------
-
-Package registry entries are individually owned by the project installations
-that they reference.  A package installer is responsible for adding its own
-entry and the corresponding uninstaller is responsible for removing it.
-
-The :command:`export(PACKAGE)` command populates the user package registry
-with the location of a project build tree.  Build trees tend to be deleted by
-developers and have no "uninstall" event that could trigger removal of their
-entries.  In order to keep the registries clean the :command:`find_package`
-command automatically removes stale entries it encounters if it has sufficient
-permissions.  CMake provides no interface to remove an entry referencing an
-existing build tree once :command:`export(PACKAGE)` has been invoked.
-However, if the project removes its package configuration file from the build
-tree then the entry referencing the location will be considered stale.
diff --git a/share/cmake-3.2/Help/manual/cmake-policies.7.rst b/share/cmake-3.2/Help/manual/cmake-policies.7.rst
deleted file mode 100644
index 96f39e6..0000000
--- a/share/cmake-3.2/Help/manual/cmake-policies.7.rst
+++ /dev/null
@@ -1,116 +0,0 @@
-.. cmake-manual-description: CMake Policies Reference
-
-cmake-policies(7)
-*****************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-Policies in CMake are used to preserve backward compatible behavior
-across multiple releases.  When a new policy is introduced, newer CMake
-versions will begin to warn about the backward compatible behavior.  It
-is possible to disable the warning by explicitly requesting the OLD, or
-backward compatible behavior using the :command:`cmake_policy` command.
-It is also possible to request ``NEW``, or non-backward compatible behavior
-for a policy, also avoiding the warning.  Each policy can also be set to
-either ``NEW`` or ``OLD`` behavior explicitly on the command line with the
-:variable:`CMAKE_POLICY_DEFAULT_CMP<NNNN>` variable.
-
-Note that policies are not reliable feature toggles.  A policy should
-almost never be set to ``OLD``, except to silence warnings in an otherwise
-frozen or stable codebase, or temporarily as part of a larger migration
-path. The ``OLD`` behavior of each policy is undesirable and will be
-replaced with an error condition in a future release.
-
-The :command:`cmake_minimum_required` command does more than report an
-error if a too-old version of CMake is used to build a project.  It
-also sets all policies introduced in that CMake version or earlier to
-``NEW`` behavior.  To manage policies without increasing the minimum required
-CMake version, the :command:`if(POLICY)` command may be used:
-
-.. code-block:: cmake
-
-  if(POLICY CMP0990)
-    cmake_policy(SET CMP0990 NEW)
-  endif()
-
-This has the effect of using the ``NEW`` behavior with newer CMake releases which
-users may be using and not issuing a compatibility warning.
-
-The setting of a policy is confined in some cases to not propagate to the
-parent scope.  For example, if the files read by the :command:`include` command
-or the :command:`find_package` command contain a use of :command:`cmake_policy`,
-that policy setting will not affect the caller by default.  Both commands accept
-an optional ``NO_POLICY_SCOPE`` keyword to control this behavior.
-
-The :variable:`CMAKE_MINIMUM_REQUIRED_VERSION` variable may also be used
-to determine whether to report an error on use of deprecated macros or
-functions.
-
-All Policies
-============
-
-.. toctree::
-   :maxdepth: 1
-
-   /policy/CMP0000
-   /policy/CMP0001
-   /policy/CMP0002
-   /policy/CMP0003
-   /policy/CMP0004
-   /policy/CMP0005
-   /policy/CMP0006
-   /policy/CMP0007
-   /policy/CMP0008
-   /policy/CMP0009
-   /policy/CMP0010
-   /policy/CMP0011
-   /policy/CMP0012
-   /policy/CMP0013
-   /policy/CMP0014
-   /policy/CMP0015
-   /policy/CMP0016
-   /policy/CMP0017
-   /policy/CMP0018
-   /policy/CMP0019
-   /policy/CMP0020
-   /policy/CMP0021
-   /policy/CMP0022
-   /policy/CMP0023
-   /policy/CMP0024
-   /policy/CMP0025
-   /policy/CMP0026
-   /policy/CMP0027
-   /policy/CMP0028
-   /policy/CMP0029
-   /policy/CMP0030
-   /policy/CMP0031
-   /policy/CMP0032
-   /policy/CMP0033
-   /policy/CMP0034
-   /policy/CMP0035
-   /policy/CMP0036
-   /policy/CMP0037
-   /policy/CMP0038
-   /policy/CMP0039
-   /policy/CMP0040
-   /policy/CMP0041
-   /policy/CMP0042
-   /policy/CMP0043
-   /policy/CMP0044
-   /policy/CMP0045
-   /policy/CMP0046
-   /policy/CMP0047
-   /policy/CMP0048
-   /policy/CMP0049
-   /policy/CMP0050
-   /policy/CMP0051
-   /policy/CMP0052
-   /policy/CMP0053
-   /policy/CMP0054
-   /policy/CMP0055
-   /policy/CMP0056
diff --git a/share/cmake-3.2/Help/manual/cmake-properties.7.rst b/share/cmake-3.2/Help/manual/cmake-properties.7.rst
deleted file mode 100644
index 25f989f..0000000
--- a/share/cmake-3.2/Help/manual/cmake-properties.7.rst
+++ /dev/null
@@ -1,354 +0,0 @@
-.. cmake-manual-description: CMake Properties Reference
-
-cmake-properties(7)
-*******************
-
-.. only:: html
-
-   .. contents::
-
-Properties of Global Scope
-==========================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_gbl/ALLOW_DUPLICATE_CUSTOM_TARGETS
-   /prop_gbl/AUTOGEN_TARGETS_FOLDER
-   /prop_gbl/AUTOMOC_TARGETS_FOLDER
-   /prop_gbl/CMAKE_C_KNOWN_FEATURES
-   /prop_gbl/CMAKE_CXX_KNOWN_FEATURES
-   /prop_gbl/DEBUG_CONFIGURATIONS
-   /prop_gbl/DISABLED_FEATURES
-   /prop_gbl/ENABLED_FEATURES
-   /prop_gbl/ENABLED_LANGUAGES
-   /prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS
-   /prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING
-   /prop_gbl/GLOBAL_DEPENDS_DEBUG_MODE
-   /prop_gbl/GLOBAL_DEPENDS_NO_CYCLES
-   /prop_gbl/IN_TRY_COMPILE
-   /prop_gbl/PACKAGES_FOUND
-   /prop_gbl/PACKAGES_NOT_FOUND
-   /prop_gbl/JOB_POOLS
-   /prop_gbl/PREDEFINED_TARGETS_FOLDER
-   /prop_gbl/ECLIPSE_EXTRA_NATURES
-   /prop_gbl/REPORT_UNDEFINED_PROPERTIES
-   /prop_gbl/RULE_LAUNCH_COMPILE
-   /prop_gbl/RULE_LAUNCH_CUSTOM
-   /prop_gbl/RULE_LAUNCH_LINK
-   /prop_gbl/RULE_MESSAGES
-   /prop_gbl/TARGET_ARCHIVES_MAY_BE_SHARED_LIBS
-   /prop_gbl/TARGET_SUPPORTS_SHARED_LIBS
-   /prop_gbl/USE_FOLDERS
-
-Properties on Directories
-=========================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_dir/ADDITIONAL_MAKE_CLEAN_FILES
-   /prop_dir/CACHE_VARIABLES
-   /prop_dir/CLEAN_NO_CUSTOM
-   /prop_dir/CMAKE_CONFIGURE_DEPENDS
-   /prop_dir/COMPILE_DEFINITIONS
-   /prop_dir/COMPILE_OPTIONS
-   /prop_dir/DEFINITIONS
-   /prop_dir/EXCLUDE_FROM_ALL
-   /prop_dir/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
-   /prop_dir/INCLUDE_DIRECTORIES
-   /prop_dir/INCLUDE_REGULAR_EXPRESSION
-   /prop_dir/INTERPROCEDURAL_OPTIMIZATION_CONFIG
-   /prop_dir/INTERPROCEDURAL_OPTIMIZATION
-   /prop_dir/LINK_DIRECTORIES
-   /prop_dir/LISTFILE_STACK
-   /prop_dir/MACROS
-   /prop_dir/PARENT_DIRECTORY
-   /prop_dir/RULE_LAUNCH_COMPILE
-   /prop_dir/RULE_LAUNCH_CUSTOM
-   /prop_dir/RULE_LAUNCH_LINK
-   /prop_dir/TEST_INCLUDE_FILE
-   /prop_dir/VARIABLES
-   /prop_dir/VS_GLOBAL_SECTION_POST_section
-   /prop_dir/VS_GLOBAL_SECTION_PRE_section
-
-Properties on Targets
-=====================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_tgt/ALIASED_TARGET
-   /prop_tgt/ANDROID_API
-   /prop_tgt/ANDROID_API_MIN
-   /prop_tgt/ANDROID_GUI
-   /prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG
-   /prop_tgt/ARCHIVE_OUTPUT_DIRECTORY
-   /prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG
-   /prop_tgt/ARCHIVE_OUTPUT_NAME
-   /prop_tgt/AUTOGEN_TARGET_DEPENDS
-   /prop_tgt/AUTOMOC_MOC_OPTIONS
-   /prop_tgt/AUTOMOC
-   /prop_tgt/AUTOUIC
-   /prop_tgt/AUTOUIC_OPTIONS
-   /prop_tgt/AUTORCC
-   /prop_tgt/AUTORCC_OPTIONS
-   /prop_tgt/BUILD_WITH_INSTALL_RPATH
-   /prop_tgt/BUNDLE_EXTENSION
-   /prop_tgt/BUNDLE
-   /prop_tgt/C_EXTENSIONS
-   /prop_tgt/C_STANDARD
-   /prop_tgt/C_STANDARD_REQUIRED
-   /prop_tgt/COMPATIBLE_INTERFACE_BOOL
-   /prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MAX
-   /prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MIN
-   /prop_tgt/COMPATIBLE_INTERFACE_STRING
-   /prop_tgt/COMPILE_DEFINITIONS
-   /prop_tgt/COMPILE_FEATURES
-   /prop_tgt/COMPILE_FLAGS
-   /prop_tgt/COMPILE_OPTIONS
-   /prop_tgt/COMPILE_PDB_NAME
-   /prop_tgt/COMPILE_PDB_NAME_CONFIG
-   /prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY
-   /prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG
-   /prop_tgt/CONFIG_OUTPUT_NAME
-   /prop_tgt/CONFIG_POSTFIX
-   /prop_tgt/CXX_EXTENSIONS
-   /prop_tgt/CXX_STANDARD
-   /prop_tgt/CXX_STANDARD_REQUIRED
-   /prop_tgt/DEBUG_POSTFIX
-   /prop_tgt/DEFINE_SYMBOL
-   /prop_tgt/EchoString
-   /prop_tgt/ENABLE_EXPORTS
-   /prop_tgt/EXCLUDE_FROM_ALL
-   /prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD_CONFIG
-   /prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD
-   /prop_tgt/EXPORT_NAME
-   /prop_tgt/FOLDER
-   /prop_tgt/Fortran_FORMAT
-   /prop_tgt/Fortran_MODULE_DIRECTORY
-   /prop_tgt/FRAMEWORK
-   /prop_tgt/GENERATOR_FILE_NAME
-   /prop_tgt/GNUtoMS
-   /prop_tgt/HAS_CXX
-   /prop_tgt/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
-   /prop_tgt/IMPORTED_CONFIGURATIONS
-   /prop_tgt/IMPORTED_IMPLIB_CONFIG
-   /prop_tgt/IMPORTED_IMPLIB
-   /prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES_CONFIG
-   /prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES
-   /prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES_CONFIG
-   /prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES
-   /prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES_CONFIG
-   /prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES
-   /prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY_CONFIG
-   /prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY
-   /prop_tgt/IMPORTED_LOCATION_CONFIG
-   /prop_tgt/IMPORTED_LOCATION
-   /prop_tgt/IMPORTED_NO_SONAME_CONFIG
-   /prop_tgt/IMPORTED_NO_SONAME
-   /prop_tgt/IMPORTED
-   /prop_tgt/IMPORTED_SONAME_CONFIG
-   /prop_tgt/IMPORTED_SONAME
-   /prop_tgt/IMPORT_PREFIX
-   /prop_tgt/IMPORT_SUFFIX
-   /prop_tgt/INCLUDE_DIRECTORIES
-   /prop_tgt/INSTALL_NAME_DIR
-   /prop_tgt/INSTALL_RPATH
-   /prop_tgt/INSTALL_RPATH_USE_LINK_PATH
-   /prop_tgt/INTERFACE_AUTOUIC_OPTIONS
-   /prop_tgt/INTERFACE_COMPILE_DEFINITIONS
-   /prop_tgt/INTERFACE_COMPILE_FEATURES
-   /prop_tgt/INTERFACE_COMPILE_OPTIONS
-   /prop_tgt/INTERFACE_INCLUDE_DIRECTORIES
-   /prop_tgt/INTERFACE_LINK_LIBRARIES
-   /prop_tgt/INTERFACE_POSITION_INDEPENDENT_CODE
-   /prop_tgt/INTERFACE_SOURCES
-   /prop_tgt/INTERFACE_SYSTEM_INCLUDE_DIRECTORIES
-   /prop_tgt/INTERPROCEDURAL_OPTIMIZATION_CONFIG
-   /prop_tgt/INTERPROCEDURAL_OPTIMIZATION
-   /prop_tgt/JOB_POOL_COMPILE
-   /prop_tgt/JOB_POOL_LINK
-   /prop_tgt/LABELS
-   /prop_tgt/LANG_VISIBILITY_PRESET
-   /prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG
-   /prop_tgt/LIBRARY_OUTPUT_DIRECTORY
-   /prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG
-   /prop_tgt/LIBRARY_OUTPUT_NAME
-   /prop_tgt/LINK_DEPENDS_NO_SHARED
-   /prop_tgt/LINK_DEPENDS
-   /prop_tgt/LINKER_LANGUAGE
-   /prop_tgt/LINK_FLAGS_CONFIG
-   /prop_tgt/LINK_FLAGS
-   /prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG
-   /prop_tgt/LINK_INTERFACE_LIBRARIES
-   /prop_tgt/LINK_INTERFACE_MULTIPLICITY_CONFIG
-   /prop_tgt/LINK_INTERFACE_MULTIPLICITY
-   /prop_tgt/LINK_LIBRARIES
-   /prop_tgt/LINK_SEARCH_END_STATIC
-   /prop_tgt/LINK_SEARCH_START_STATIC
-   /prop_tgt/LOCATION_CONFIG
-   /prop_tgt/LOCATION
-   /prop_tgt/MACOSX_BUNDLE_INFO_PLIST
-   /prop_tgt/MACOSX_BUNDLE
-   /prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST
-   /prop_tgt/MACOSX_RPATH
-   /prop_tgt/MAP_IMPORTED_CONFIG_CONFIG
-   /prop_tgt/NAME
-   /prop_tgt/NO_SONAME
-   /prop_tgt/NO_SYSTEM_FROM_IMPORTED
-   /prop_tgt/OSX_ARCHITECTURES_CONFIG
-   /prop_tgt/OSX_ARCHITECTURES
-   /prop_tgt/OUTPUT_NAME_CONFIG
-   /prop_tgt/OUTPUT_NAME
-   /prop_tgt/PDB_NAME_CONFIG
-   /prop_tgt/PDB_NAME
-   /prop_tgt/PDB_OUTPUT_DIRECTORY_CONFIG
-   /prop_tgt/PDB_OUTPUT_DIRECTORY
-   /prop_tgt/POSITION_INDEPENDENT_CODE
-   /prop_tgt/PREFIX
-   /prop_tgt/PRIVATE_HEADER
-   /prop_tgt/PROJECT_LABEL
-   /prop_tgt/PUBLIC_HEADER
-   /prop_tgt/RESOURCE
-   /prop_tgt/RULE_LAUNCH_COMPILE
-   /prop_tgt/RULE_LAUNCH_CUSTOM
-   /prop_tgt/RULE_LAUNCH_LINK
-   /prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG
-   /prop_tgt/RUNTIME_OUTPUT_DIRECTORY
-   /prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG
-   /prop_tgt/RUNTIME_OUTPUT_NAME
-   /prop_tgt/SKIP_BUILD_RPATH
-   /prop_tgt/SOURCES
-   /prop_tgt/SOVERSION
-   /prop_tgt/STATIC_LIBRARY_FLAGS_CONFIG
-   /prop_tgt/STATIC_LIBRARY_FLAGS
-   /prop_tgt/SUFFIX
-   /prop_tgt/TYPE
-   /prop_tgt/VERSION
-   /prop_tgt/VISIBILITY_INLINES_HIDDEN
-   /prop_tgt/VS_DOTNET_REFERENCES
-   /prop_tgt/VS_DOTNET_TARGET_FRAMEWORK_VERSION
-   /prop_tgt/VS_GLOBAL_KEYWORD
-   /prop_tgt/VS_GLOBAL_PROJECT_TYPES
-   /prop_tgt/VS_GLOBAL_ROOTNAMESPACE
-   /prop_tgt/VS_GLOBAL_variable
-   /prop_tgt/VS_KEYWORD
-   /prop_tgt/VS_SCC_AUXPATH
-   /prop_tgt/VS_SCC_LOCALPATH
-   /prop_tgt/VS_SCC_PROJECTNAME
-   /prop_tgt/VS_SCC_PROVIDER
-   /prop_tgt/VS_WINRT_COMPONENT
-   /prop_tgt/VS_WINRT_EXTENSIONS
-   /prop_tgt/VS_WINRT_REFERENCES
-   /prop_tgt/WIN32_EXECUTABLE
-   /prop_tgt/XCODE_ATTRIBUTE_an-attribute
-
-Properties on Tests
-===================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_test/ATTACHED_FILES_ON_FAIL
-   /prop_test/ATTACHED_FILES
-   /prop_test/COST
-   /prop_test/DEPENDS
-   /prop_test/ENVIRONMENT
-   /prop_test/FAIL_REGULAR_EXPRESSION
-   /prop_test/LABELS
-   /prop_test/MEASUREMENT
-   /prop_test/PASS_REGULAR_EXPRESSION
-   /prop_test/PROCESSORS
-   /prop_test/REQUIRED_FILES
-   /prop_test/RESOURCE_LOCK
-   /prop_test/RUN_SERIAL
-   /prop_test/SKIP_RETURN_CODE
-   /prop_test/TIMEOUT
-   /prop_test/WILL_FAIL
-   /prop_test/WORKING_DIRECTORY
-
-Properties on Source Files
-==========================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_sf/ABSTRACT
-   /prop_sf/AUTOUIC_OPTIONS
-   /prop_sf/AUTORCC_OPTIONS
-   /prop_sf/COMPILE_DEFINITIONS
-   /prop_sf/COMPILE_FLAGS
-   /prop_sf/EXTERNAL_OBJECT
-   /prop_sf/Fortran_FORMAT
-   /prop_sf/GENERATED
-   /prop_sf/HEADER_FILE_ONLY
-   /prop_sf/KEEP_EXTENSION
-   /prop_sf/LABELS
-   /prop_sf/LANGUAGE
-   /prop_sf/LOCATION
-   /prop_sf/MACOSX_PACKAGE_LOCATION
-   /prop_sf/OBJECT_DEPENDS
-   /prop_sf/OBJECT_OUTPUTS
-   /prop_sf/SYMBOLIC
-   /prop_sf/VS_DEPLOYMENT_CONTENT
-   /prop_sf/VS_DEPLOYMENT_LOCATION
-   /prop_sf/VS_SHADER_ENTRYPOINT
-   /prop_sf/VS_SHADER_FLAGS
-   /prop_sf/VS_SHADER_MODEL
-   /prop_sf/VS_SHADER_TYPE
-   /prop_sf/WRAP_EXCLUDE
-   /prop_sf/XCODE_EXPLICIT_FILE_TYPE
-   /prop_sf/XCODE_LAST_KNOWN_FILE_TYPE
-
-Properties on Cache Entries
-===========================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_cache/ADVANCED
-   /prop_cache/HELPSTRING
-   /prop_cache/MODIFIED
-   /prop_cache/STRINGS
-   /prop_cache/TYPE
-   /prop_cache/VALUE
-
-Properties on Installed Files
-=============================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_inst/CPACK_NEVER_OVERWRITE.rst
-   /prop_inst/CPACK_PERMANENT.rst
-   /prop_inst/CPACK_WIX_ACL.rst
-
-
-Deprecated Properties on Directories
-=====================================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_dir/COMPILE_DEFINITIONS_CONFIG
-
-
-Deprecated Properties on Targets
-================================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_tgt/COMPILE_DEFINITIONS_CONFIG
-   /prop_tgt/POST_INSTALL_SCRIPT
-   /prop_tgt/PRE_INSTALL_SCRIPT
-
-
-Deprecated Properties on Source Files
-=====================================
-
-.. toctree::
-   :maxdepth: 1
-
-   /prop_sf/COMPILE_DEFINITIONS_CONFIG
diff --git a/share/cmake-3.2/Help/manual/cmake-toolchains.7.rst b/share/cmake-3.2/Help/manual/cmake-toolchains.7.rst
deleted file mode 100644
index 054438d..0000000
--- a/share/cmake-3.2/Help/manual/cmake-toolchains.7.rst
+++ /dev/null
@@ -1,261 +0,0 @@
-.. cmake-manual-description: CMake Toolchains Reference
-
-cmake-toolchains(7)
-*******************
-
-.. only:: html
-
-   .. contents::
-
-Introduction
-============
-
-CMake uses a toolchain of utilities to compile, link libraries and create
-archives, and other tasks to drive the build. The toolchain utilities available
-are determined by the languages enabled. In normal builds, CMake automatically
-determines the toolchain for host builds based on system introspection and
-defaults. In cross-compiling scenarios, a toolchain file may be specified
-with information about compiler and utility paths.
-
-Languages
-=========
-
-Languages are enabled by the :command:`project` command.  Language-specific
-built-in variables, such as
-:variable:`CMAKE_CXX_COMPILER <CMAKE_<LANG>_COMPILER>`,
-:variable:`CMAKE_CXX_COMPILER_ID <CMAKE_<LANG>_COMPILER_ID>` etc are set by
-invoking the :command:`project` command.  If no project command
-is in the top-level CMakeLists file, one will be implicitly generated. By default
-the enabled languages are C and CXX:
-
-.. code-block:: cmake
-
-  project(C_Only C)
-
-A special value of NONE can also be used with the :command:`project` command
-to enable no languages:
-
-.. code-block:: cmake
-
-  project(MyProject NONE)
-
-The :command:`enable_language` command can be used to enable languages after the
-:command:`project` command:
-
-.. code-block:: cmake
-
-  enable_language(CXX)
-
-When a language is enabled, CMake finds a compiler for that language, and
-determines some information, such as the vendor and version of the compiler,
-the target architecture and bitwidth, the location of corresponding utilities
-etc.
-
-The :prop_gbl:`ENABLED_LANGUAGES` global property contains the languages which
-are currently enabled.
-
-Variables and Properties
-========================
-
-Several variables relate to the language components of a toolchain which are
-enabled. :variable:`CMAKE_<LANG>_COMPILER` is the full path to the compiler used
-for ``<LANG>``. :variable:`CMAKE_<LANG>_COMPILER_ID` is the identifier used
-by CMake for the compiler and :variable:`CMAKE_<LANG>_COMPILER_VERSION` is the
-version of the compiler.
-
-The :variable:`CMAKE_<LANG>_FLAGS` variables and the configuration-specific
-equivalents contain flags that will be added to the compile command when
-compiling a file of a particular language.
-
-As the linker is invoked by the compiler driver, CMake needs a way to determine
-which compiler to use to invoke the linker. This is calculated by the
-:prop_sf:`LANGUAGE` of source files in the target, and in the case of static
-libraries, the language of the dependent libraries. The choice CMake makes may
-be overridden with the :prop_tgt:`LINKER_LANGUAGE` target property.
-
-Toolchain Features
-==================
-
-CMake provides the :command:`try_compile` command and wrapper macros such as
-:module:`CheckCXXSourceCompiles`, :module:`CheckCXXSymbolExists` and
-:module:`CheckIncludeFile` to test capability and availability of various
-toolchain features. These APIs test the toolchain in some way and cache the
-result so that the test does not have to be performed again the next time
-CMake runs.
-
-Some toolchain features have built-in handling in CMake, and do not require
-compile-tests. For example, :prop_tgt:`POSITION_INDEPENDENT_CODE` allows
-specifying that a target should be built as position-independent code, if
-the compiler supports that feature. The :prop_tgt:`<LANG>_VISIBILITY_PRESET`
-and :prop_tgt:`VISIBILITY_INLINES_HIDDEN` target properties add flags for
-hidden visibility, if supported by the compiler.
-
-.. _`Cross Compiling Toolchain`:
-
-Cross Compiling
-===============
-
-If :manual:`cmake(1)` is invoked with the command line parameter
-``-DCMAKE_TOOLCHAIN_FILE=path/to/file``, the file will be loaded early to set
-values for the compilers.
-The :variable:`CMAKE_CROSSCOMPILING` variable is set to true when CMake is
-cross-compiling.
-
-Cross Compiling for Linux
--------------------------
-
-A typical cross-compiling toolchain for Linux has content such
-as:
-
-.. code-block:: cmake
-
-  set(CMAKE_SYSTEM_NAME Linux)
-  set(CMAKE_SYSTEM_PROCESSOR arm)
-
-  set(CMAKE_SYSROOT /home/devel/rasp-pi-rootfs)
-  set(CMAKE_STAGING_PREFIX /home/devel/stage)
-
-  set(tools /home/devel/gcc-4.7-linaro-rpi-gnueabihf)
-  set(CMAKE_C_COMPILER ${tools}/bin/arm-linux-gnueabihf-gcc)
-  set(CMAKE_CXX_COMPILER ${tools}/bin/arm-linux-gnueabihf-g++)
-
-  set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
-  set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
-  set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
-  set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY)
-
-The :variable:`CMAKE_SYSTEM_NAME` is the CMake-identifier of the target platform
-to build for.
-
-The :variable:`CMAKE_SYSTEM_PROCESSOR` is the CMake-identifier of the target architecture
-to build for.
-
-The :variable:`CMAKE_SYSROOT` is optional, and may be specified if a sysroot
-is available.
-
-The :variable:`CMAKE_STAGING_PREFIX` is also optional. It may be used to specify
-a path on the host to install to. The :variable:`CMAKE_INSTALL_PREFIX` is always
-the runtime installation location, even when cross-compiling.
-
-The :variable:`CMAKE_<LANG>_COMPILER` variables may be set to full paths, or to
-names of compilers to search for in standard locations. In cases where CMake does
-not have enough information to extract information from the compiler, the
-:module:`CMakeForceCompiler` module can be used to bypass some of the checks.
-
-CMake ``find_*`` commands will look in the sysroot, and the :variable:`CMAKE_FIND_ROOT_PATH`
-entries by default in all cases, as well as looking in the host system root prefix.
-Although this can be controlled on a case-by-case basis, when cross-compiling, it
-can be useful to exclude looking in either the host or the target for particular
-artifacts. Generally, includes, libraries and packages should be found in the
-target system prefixes, whereas executables which must be run as part of the build
-should be found only on the host and not on the target. This is the purpose of
-the ``CMAKE_FIND_ROOT_PATH_MODE_*`` variables.
-
-Cross Compiling using Clang
----------------------------
-
-Some compilers such as Clang are inherently cross compilers.
-The :variable:`CMAKE_<LANG>_COMPILER_TARGET` can be set to pass a
-value to those supported compilers when compiling:
-
-.. code-block:: cmake
-
-  set(CMAKE_SYSTEM_NAME Linux)
-  set(CMAKE_SYSTEM_PROCESSOR arm)
-
-  set(triple arm-linux-gnueabihf)
-
-  set(CMAKE_C_COMPILER clang)
-  set(CMAKE_C_COMPILER_TARGET ${triple})
-  set(CMAKE_CXX_COMPILER clang++)
-  set(CMAKE_CXX_COMPILER_TARGET ${triple})
-
-Similarly, some compilers do not ship their own supplementary utilities
-such as linkers, but provide a way to specify the location of the external
-toolchain which will be used by the compiler driver. The
-:variable:`CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN` variable can be set in a
-toolchain file to pass the path to the compiler driver.
-
-Cross Compiling for QNX
------------------------
-
-As the Clang compiler the QNX QCC compile is inherently a cross compiler.
-And the :variable:`CMAKE_<LANG>_COMPILER_TARGET` can be set to pass a
-value to those supported compilers when compiling:
-
-.. code-block:: cmake
-
-  set(CMAKE_SYSTEM_NAME QNX)
-
-  set(arch gcc_ntoarmv7le)
-
-  set(CMAKE_C_COMPILER qcc)
-  set(CMAKE_C_COMPILER_TARGET ${arch})
-  set(CMAKE_CXX_COMPILER QCC)
-  set(CMAKE_CXX_COMPILER_TARGET ${arch})
-
-Cross Compiling for Windows CE
-------------------------------
-
-Cross compiling for Windows CE requires the corresponding SDK being
-installed on your system.  These SDKs are usually installed under
-``C:/Program Files (x86)/Windows CE Tools/SDKs``.
-
-A toolchain file to configure a Visual Studio generator for
-Windows CE may look like this:
-
-.. code-block:: cmake
-
-  set(CMAKE_SYSTEM_NAME WindowsCE)
-
-  set(CMAKE_SYSTEM_VERSION 8.0)
-  set(CMAKE_SYSTEM_PROCESSOR arm)
-
-  set(CMAKE_GENERATOR_TOOLSET CE800) # Can be omitted for 8.0
-  set(CMAKE_GENERATOR_PLATFORM SDK_AM335X_SK_WEC2013_V310)
-
-The :variable:`CMAKE_GENERATOR_PLATFORM` tells the generator which SDK to use.
-Further :variable:`CMAKE_SYSTEM_VERSION` tells the generator what version of
-Windows CE to use.  Currently version 8.0 (Windows Embedded Compact 2013) is
-supported out of the box.  Other versions may require one to set
-:variable:`CMAKE_GENERATOR_TOOLSET` to the correct value.
-
-Cross Compiling for Windows Phone
----------------------------------
-
-A toolchain file to configure a Visual Studio generator for
-Windows Phone may look like this:
-
-.. code-block:: cmake
-
-  set(CMAKE_SYSTEM_NAME WindowsPhone)
-  set(CMAKE_SYSTEM_VERSION 8.1)
-
-Cross Compiling for Windows Store
----------------------------------
-
-A toolchain file to configure a Visual Studio generator for
-Windows Store may look like this:
-
-.. code-block:: cmake
-
-  set(CMAKE_SYSTEM_NAME WindowsStore)
-  set(CMAKE_SYSTEM_VERSION 8.1)
-
-Cross Compiling using NVIDIA Nsight Tegra
------------------------------------------
-
-A toolchain file to configure a Visual Studio generator to
-build using NVIDIA Nsight Tegra targeting Android may look
-like this:
-
-.. code-block:: cmake
-
-  set(CMAKE_SYSTEM_NAME Android)
-
-The :variable:`CMAKE_GENERATOR_TOOLSET` may be set to select
-the Nsight Tegra "Toolchain Version" value.
-
-See the :prop_tgt:`ANDROID_API_MIN`, :prop_tgt:`ANDROID_API`
-and :prop_tgt:`ANDROID_GUI` target properties to configure
-targets within the project.
diff --git a/share/cmake-3.2/Help/manual/cmake-variables.7.rst b/share/cmake-3.2/Help/manual/cmake-variables.7.rst
deleted file mode 100644
index c342dbe..0000000
--- a/share/cmake-3.2/Help/manual/cmake-variables.7.rst
+++ /dev/null
@@ -1,393 +0,0 @@
-.. cmake-manual-description: CMake Variables Reference
-
-cmake-variables(7)
-******************
-
-.. only:: html
-
-   .. contents::
-
-Variables that Provide Information
-==================================
-
-.. toctree::
-   :maxdepth: 1
-
-   /variable/CMAKE_ARGC
-   /variable/CMAKE_ARGV0
-   /variable/CMAKE_AR
-   /variable/CMAKE_BINARY_DIR
-   /variable/CMAKE_BUILD_TOOL
-   /variable/CMAKE_CACHEFILE_DIR
-   /variable/CMAKE_CACHE_MAJOR_VERSION
-   /variable/CMAKE_CACHE_MINOR_VERSION
-   /variable/CMAKE_CACHE_PATCH_VERSION
-   /variable/CMAKE_CFG_INTDIR
-   /variable/CMAKE_COMMAND
-   /variable/CMAKE_CROSSCOMPILING
-   /variable/CMAKE_CTEST_COMMAND
-   /variable/CMAKE_CURRENT_BINARY_DIR
-   /variable/CMAKE_CURRENT_LIST_DIR
-   /variable/CMAKE_CURRENT_LIST_FILE
-   /variable/CMAKE_CURRENT_LIST_LINE
-   /variable/CMAKE_CURRENT_SOURCE_DIR
-   /variable/CMAKE_DL_LIBS
-   /variable/CMAKE_EDIT_COMMAND
-   /variable/CMAKE_EXECUTABLE_SUFFIX
-   /variable/CMAKE_EXTRA_GENERATOR
-   /variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES
-   /variable/CMAKE_FIND_PACKAGE_NAME
-   /variable/CMAKE_GENERATOR
-   /variable/CMAKE_GENERATOR_PLATFORM
-   /variable/CMAKE_GENERATOR_TOOLSET
-   /variable/CMAKE_HOME_DIRECTORY
-   /variable/CMAKE_IMPORT_LIBRARY_PREFIX
-   /variable/CMAKE_IMPORT_LIBRARY_SUFFIX
-   /variable/CMAKE_JOB_POOL_COMPILE
-   /variable/CMAKE_JOB_POOL_LINK
-   /variable/CMAKE_LINK_LIBRARY_SUFFIX
-   /variable/CMAKE_MAJOR_VERSION
-   /variable/CMAKE_MAKE_PROGRAM
-   /variable/CMAKE_MATCH_COUNT
-   /variable/CMAKE_MINIMUM_REQUIRED_VERSION
-   /variable/CMAKE_MINOR_VERSION
-   /variable/CMAKE_PARENT_LIST_FILE
-   /variable/CMAKE_PATCH_VERSION
-   /variable/CMAKE_PROJECT_NAME
-   /variable/CMAKE_RANLIB
-   /variable/CMAKE_ROOT
-   /variable/CMAKE_SCRIPT_MODE_FILE
-   /variable/CMAKE_SHARED_LIBRARY_PREFIX
-   /variable/CMAKE_SHARED_LIBRARY_SUFFIX
-   /variable/CMAKE_SHARED_MODULE_PREFIX
-   /variable/CMAKE_SHARED_MODULE_SUFFIX
-   /variable/CMAKE_SIZEOF_VOID_P
-   /variable/CMAKE_SKIP_INSTALL_RULES
-   /variable/CMAKE_SKIP_RPATH
-   /variable/CMAKE_SOURCE_DIR
-   /variable/CMAKE_STANDARD_LIBRARIES
-   /variable/CMAKE_STATIC_LIBRARY_PREFIX
-   /variable/CMAKE_STATIC_LIBRARY_SUFFIX
-   /variable/CMAKE_TOOLCHAIN_FILE
-   /variable/CMAKE_TWEAK_VERSION
-   /variable/CMAKE_VERBOSE_MAKEFILE
-   /variable/CMAKE_VERSION
-   /variable/CMAKE_VS_DEVENV_COMMAND
-   /variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION
-   /variable/CMAKE_VS_MSBUILD_COMMAND
-   /variable/CMAKE_VS_MSDEV_COMMAND
-   /variable/CMAKE_VS_NsightTegra_VERSION
-   /variable/CMAKE_VS_PLATFORM_NAME
-   /variable/CMAKE_VS_PLATFORM_TOOLSET
-   /variable/CMAKE_XCODE_PLATFORM_TOOLSET
-   /variable/PROJECT_BINARY_DIR
-   /variable/PROJECT-NAME_BINARY_DIR
-   /variable/PROJECT_NAME
-   /variable/PROJECT-NAME_SOURCE_DIR
-   /variable/PROJECT-NAME_VERSION
-   /variable/PROJECT-NAME_VERSION_MAJOR
-   /variable/PROJECT-NAME_VERSION_MINOR
-   /variable/PROJECT-NAME_VERSION_PATCH
-   /variable/PROJECT-NAME_VERSION_TWEAK
-   /variable/PROJECT_SOURCE_DIR
-   /variable/PROJECT_VERSION
-   /variable/PROJECT_VERSION_MAJOR
-   /variable/PROJECT_VERSION_MINOR
-   /variable/PROJECT_VERSION_PATCH
-   /variable/PROJECT_VERSION_TWEAK
-
-Variables that Change Behavior
-==============================
-
-.. toctree::
-   :maxdepth: 1
-
-   /variable/BUILD_SHARED_LIBS
-   /variable/CMAKE_ABSOLUTE_DESTINATION_FILES
-   /variable/CMAKE_APPBUNDLE_PATH
-   /variable/CMAKE_AUTOMOC_RELAXED_MODE
-   /variable/CMAKE_BACKWARDS_COMPATIBILITY
-   /variable/CMAKE_BUILD_TYPE
-   /variable/CMAKE_COLOR_MAKEFILE
-   /variable/CMAKE_CONFIGURATION_TYPES
-   /variable/CMAKE_DEBUG_TARGET_PROPERTIES
-   /variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName
-   /variable/CMAKE_ERROR_DEPRECATED
-   /variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
-   /variable/CMAKE_EXPORT_NO_PACKAGE_REGISTRY
-   /variable/CMAKE_SYSROOT
-   /variable/CMAKE_FIND_LIBRARY_PREFIXES
-   /variable/CMAKE_FIND_LIBRARY_SUFFIXES
-   /variable/CMAKE_FIND_NO_INSTALL_PREFIX
-   /variable/CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY
-   /variable/CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY
-   /variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE
-   /variable/CMAKE_FIND_ROOT_PATH
-   /variable/CMAKE_FIND_ROOT_PATH_MODE_INCLUDE
-   /variable/CMAKE_FIND_ROOT_PATH_MODE_LIBRARY
-   /variable/CMAKE_FIND_ROOT_PATH_MODE_PACKAGE
-   /variable/CMAKE_FIND_ROOT_PATH_MODE_PROGRAM
-   /variable/CMAKE_FRAMEWORK_PATH
-   /variable/CMAKE_IGNORE_PATH
-   /variable/CMAKE_INCLUDE_PATH
-   /variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE
-   /variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE
-   /variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME
-   /variable/CMAKE_INSTALL_MESSAGE
-   /variable/CMAKE_INSTALL_PREFIX
-   /variable/CMAKE_LIBRARY_PATH
-   /variable/CMAKE_MFC_FLAG
-   /variable/CMAKE_MODULE_PATH
-   /variable/CMAKE_NOT_USING_CONFIG_FLAGS
-   /variable/CMAKE_POLICY_DEFAULT_CMPNNNN
-   /variable/CMAKE_POLICY_WARNING_CMPNNNN
-   /variable/CMAKE_PREFIX_PATH
-   /variable/CMAKE_PROGRAM_PATH
-   /variable/CMAKE_PROJECT_PROJECT-NAME_INCLUDE
-   /variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY
-   /variable/CMAKE_STAGING_PREFIX
-   /variable/CMAKE_SYSTEM_IGNORE_PATH
-   /variable/CMAKE_SYSTEM_INCLUDE_PATH
-   /variable/CMAKE_SYSTEM_LIBRARY_PATH
-   /variable/CMAKE_SYSTEM_PREFIX_PATH
-   /variable/CMAKE_SYSTEM_PROGRAM_PATH
-   /variable/CMAKE_USER_MAKE_RULES_OVERRIDE
-   /variable/CMAKE_WARN_DEPRECATED
-   /variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
-
-Variables that Describe the System
-==================================
-
-.. toctree::
-   :maxdepth: 1
-
-   /variable/APPLE
-   /variable/BORLAND
-   /variable/CMAKE_CL_64
-   /variable/CMAKE_COMPILER_2005
-   /variable/CMAKE_HOST_APPLE
-   /variable/CMAKE_HOST_SYSTEM_NAME
-   /variable/CMAKE_HOST_SYSTEM_PROCESSOR
-   /variable/CMAKE_HOST_SYSTEM
-   /variable/CMAKE_HOST_SYSTEM_VERSION
-   /variable/CMAKE_HOST_UNIX
-   /variable/CMAKE_HOST_WIN32
-   /variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX
-   /variable/CMAKE_LIBRARY_ARCHITECTURE
-   /variable/CMAKE_OBJECT_PATH_MAX
-   /variable/CMAKE_SYSTEM_NAME
-   /variable/CMAKE_SYSTEM_PROCESSOR
-   /variable/CMAKE_SYSTEM
-   /variable/CMAKE_SYSTEM_VERSION
-   /variable/CYGWIN
-   /variable/ENV
-   /variable/MINGW
-   /variable/MSVC10
-   /variable/MSVC11
-   /variable/MSVC12
-   /variable/MSVC14
-   /variable/MSVC60
-   /variable/MSVC70
-   /variable/MSVC71
-   /variable/MSVC80
-   /variable/MSVC90
-   /variable/MSVC_IDE
-   /variable/MSVC
-   /variable/MSVC_VERSION
-   /variable/UNIX
-   /variable/WIN32
-   /variable/WINCE
-   /variable/WINDOWS_PHONE
-   /variable/WINDOWS_STORE
-   /variable/XCODE_VERSION
-
-Variables that Control the Build
-================================
-
-.. toctree::
-   :maxdepth: 1
-
-   /variable/CMAKE_ANDROID_API
-   /variable/CMAKE_ANDROID_API_MIN
-   /variable/CMAKE_ANDROID_GUI
-   /variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY
-   /variable/CMAKE_AUTOMOC_MOC_OPTIONS
-   /variable/CMAKE_AUTOMOC
-   /variable/CMAKE_AUTORCC
-   /variable/CMAKE_AUTORCC_OPTIONS
-   /variable/CMAKE_AUTOUIC
-   /variable/CMAKE_AUTOUIC_OPTIONS
-   /variable/CMAKE_BUILD_WITH_INSTALL_RPATH
-   /variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY
-   /variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG
-   /variable/CMAKE_CONFIG_POSTFIX
-   /variable/CMAKE_DEBUG_POSTFIX
-   /variable/CMAKE_EXE_LINKER_FLAGS_CONFIG
-   /variable/CMAKE_EXE_LINKER_FLAGS
-   /variable/CMAKE_Fortran_FORMAT
-   /variable/CMAKE_Fortran_MODULE_DIRECTORY
-   /variable/CMAKE_GNUtoMS
-   /variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE
-   /variable/CMAKE_INCLUDE_CURRENT_DIR
-   /variable/CMAKE_INSTALL_NAME_DIR
-   /variable/CMAKE_INSTALL_RPATH
-   /variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH
-   /variable/CMAKE_LANG_VISIBILITY_PRESET
-   /variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY
-   /variable/CMAKE_LIBRARY_PATH_FLAG
-   /variable/CMAKE_LINK_DEF_FILE_FLAG
-   /variable/CMAKE_LINK_DEPENDS_NO_SHARED
-   /variable/CMAKE_LINK_INTERFACE_LIBRARIES
-   /variable/CMAKE_LINK_LIBRARY_FILE_FLAG
-   /variable/CMAKE_LINK_LIBRARY_FLAG
-   /variable/CMAKE_MACOSX_BUNDLE
-   /variable/CMAKE_MACOSX_RPATH
-   /variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG
-   /variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG
-   /variable/CMAKE_MODULE_LINKER_FLAGS
-   /variable/CMAKE_NO_BUILTIN_CHRPATH
-   /variable/CMAKE_NO_SYSTEM_FROM_IMPORTED
-   /variable/CMAKE_OSX_ARCHITECTURES
-   /variable/CMAKE_OSX_DEPLOYMENT_TARGET
-   /variable/CMAKE_OSX_SYSROOT
-   /variable/CMAKE_PDB_OUTPUT_DIRECTORY
-   /variable/CMAKE_PDB_OUTPUT_DIRECTORY_CONFIG
-   /variable/CMAKE_POSITION_INDEPENDENT_CODE
-   /variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY
-   /variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG
-   /variable/CMAKE_SHARED_LINKER_FLAGS
-   /variable/CMAKE_SKIP_BUILD_RPATH
-   /variable/CMAKE_SKIP_INSTALL_RPATH
-   /variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG
-   /variable/CMAKE_STATIC_LINKER_FLAGS
-   /variable/CMAKE_TRY_COMPILE_CONFIGURATION
-   /variable/CMAKE_USE_RELATIVE_PATHS
-   /variable/CMAKE_VISIBILITY_INLINES_HIDDEN
-   /variable/CMAKE_WIN32_EXECUTABLE
-   /variable/CMAKE_XCODE_ATTRIBUTE_an-attribute
-   /variable/EXECUTABLE_OUTPUT_PATH
-   /variable/LIBRARY_OUTPUT_PATH
-
-Variables for Languages
-=======================
-
-.. toctree::
-   :maxdepth: 1
-
-   /variable/CMAKE_COMPILER_IS_GNULANG
-   /variable/CMAKE_C_COMPILE_FEATURES
-   /variable/CMAKE_C_EXTENSIONS
-   /variable/CMAKE_C_STANDARD
-   /variable/CMAKE_C_STANDARD_REQUIRED
-   /variable/CMAKE_CXX_COMPILE_FEATURES
-   /variable/CMAKE_CXX_EXTENSIONS
-   /variable/CMAKE_CXX_STANDARD
-   /variable/CMAKE_CXX_STANDARD_REQUIRED
-   /variable/CMAKE_Fortran_MODDIR_DEFAULT
-   /variable/CMAKE_Fortran_MODDIR_FLAG
-   /variable/CMAKE_Fortran_MODOUT_FLAG
-   /variable/CMAKE_INTERNAL_PLATFORM_ABI
-   /variable/CMAKE_LANG_ARCHIVE_APPEND
-   /variable/CMAKE_LANG_ARCHIVE_CREATE
-   /variable/CMAKE_LANG_ARCHIVE_FINISH
-   /variable/CMAKE_LANG_COMPILE_OBJECT
-   /variable/CMAKE_LANG_COMPILER_ABI
-   /variable/CMAKE_LANG_COMPILER_ID
-   /variable/CMAKE_LANG_COMPILER_LOADED
-   /variable/CMAKE_LANG_COMPILER
-   /variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN
-   /variable/CMAKE_LANG_COMPILER_TARGET
-   /variable/CMAKE_LANG_COMPILER_VERSION
-   /variable/CMAKE_LANG_CREATE_SHARED_LIBRARY
-   /variable/CMAKE_LANG_CREATE_SHARED_MODULE
-   /variable/CMAKE_LANG_CREATE_STATIC_LIBRARY
-   /variable/CMAKE_LANG_FLAGS_DEBUG
-   /variable/CMAKE_LANG_FLAGS_MINSIZEREL
-   /variable/CMAKE_LANG_FLAGS_RELEASE
-   /variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO
-   /variable/CMAKE_LANG_FLAGS
-   /variable/CMAKE_LANG_IGNORE_EXTENSIONS
-   /variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES
-   /variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES
-   /variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
-   /variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES
-   /variable/CMAKE_LANG_LIBRARY_ARCHITECTURE
-   /variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES
-   /variable/CMAKE_LANG_LINKER_PREFERENCE
-   /variable/CMAKE_LANG_LINK_EXECUTABLE
-   /variable/CMAKE_LANG_OUTPUT_EXTENSION
-   /variable/CMAKE_LANG_PLATFORM_ID
-   /variable/CMAKE_LANG_SIMULATE_ID
-   /variable/CMAKE_LANG_SIMULATE_VERSION
-   /variable/CMAKE_LANG_SIZEOF_DATA_PTR
-   /variable/CMAKE_LANG_SOURCE_FILE_EXTENSIONS
-   /variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG
-
-Variables for CTest
-===================
-
-.. toctree::
-   :maxdepth: 1
-
-   /variable/CTEST_BINARY_DIRECTORY
-   /variable/CTEST_BUILD_COMMAND
-   /variable/CTEST_BUILD_NAME
-   /variable/CTEST_BZR_COMMAND
-   /variable/CTEST_BZR_UPDATE_OPTIONS
-   /variable/CTEST_CHECKOUT_COMMAND
-   /variable/CTEST_CONFIGURATION_TYPE
-   /variable/CTEST_CONFIGURE_COMMAND
-   /variable/CTEST_COVERAGE_COMMAND
-   /variable/CTEST_COVERAGE_EXTRA_FLAGS
-   /variable/CTEST_CURL_OPTIONS
-   /variable/CTEST_CVS_CHECKOUT
-   /variable/CTEST_CVS_COMMAND
-   /variable/CTEST_CVS_UPDATE_OPTIONS
-   /variable/CTEST_DROP_LOCATION
-   /variable/CTEST_DROP_METHOD
-   /variable/CTEST_DROP_SITE
-   /variable/CTEST_DROP_SITE_CDASH
-   /variable/CTEST_DROP_SITE_PASSWORD
-   /variable/CTEST_DROP_SITE_USER
-   /variable/CTEST_GIT_COMMAND
-   /variable/CTEST_GIT_UPDATE_CUSTOM
-   /variable/CTEST_GIT_UPDATE_OPTIONS
-   /variable/CTEST_HG_COMMAND
-   /variable/CTEST_HG_UPDATE_OPTIONS
-   /variable/CTEST_MEMORYCHECK_COMMAND
-   /variable/CTEST_MEMORYCHECK_COMMAND_OPTIONS
-   /variable/CTEST_MEMORYCHECK_SANITIZER_OPTIONS
-   /variable/CTEST_MEMORYCHECK_SUPPRESSIONS_FILE
-   /variable/CTEST_MEMORYCHECK_TYPE
-   /variable/CTEST_NIGHTLY_START_TIME
-   /variable/CTEST_P4_CLIENT
-   /variable/CTEST_P4_COMMAND
-   /variable/CTEST_P4_OPTIONS
-   /variable/CTEST_P4_UPDATE_OPTIONS
-   /variable/CTEST_SCP_COMMAND
-   /variable/CTEST_SITE
-   /variable/CTEST_SOURCE_DIRECTORY
-   /variable/CTEST_SVN_COMMAND
-   /variable/CTEST_SVN_OPTIONS
-   /variable/CTEST_SVN_UPDATE_OPTIONS
-   /variable/CTEST_TEST_TIMEOUT
-   /variable/CTEST_TRIGGER_SITE
-   /variable/CTEST_UPDATE_COMMAND
-   /variable/CTEST_UPDATE_OPTIONS
-   /variable/CTEST_UPDATE_VERSION_ONLY
-   /variable/CTEST_USE_LAUNCHERS
-
-Variables for CPack
-===================
-
-.. toctree::
-   :maxdepth: 1
-
-   /variable/CPACK_ABSOLUTE_DESTINATION_FILES
-   /variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY
-   /variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
-   /variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY
-   /variable/CPACK_INSTALL_SCRIPT
-   /variable/CPACK_PACKAGING_INSTALL_PREFIX
-   /variable/CPACK_SET_DESTDIR
-   /variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
diff --git a/share/cmake-3.2/Help/manual/cmake.1.rst b/share/cmake-3.2/Help/manual/cmake.1.rst
deleted file mode 100644
index da41bbb..0000000
--- a/share/cmake-3.2/Help/manual/cmake.1.rst
+++ /dev/null
@@ -1,258 +0,0 @@
-.. cmake-manual-description: CMake Command-Line Reference
-
-cmake(1)
-********
-
-Synopsis
-========
-
-.. parsed-literal::
-
- cmake [<options>] (<path-to-source> | <path-to-existing-build>)
- cmake [(-D<var>=<value>)...] -P <cmake-script-file>
- cmake --build <dir> [<options>] [-- <build-tool-options>...]
- cmake -E <command> [<options>...]
- cmake --find-package <options>...
-
-Description
-===========
-
-The "cmake" executable is the CMake command-line interface.  It may be
-used to configure projects in scripts.  Project configuration settings
-may be specified on the command line with the -D option.
-
-CMake is a cross-platform build system generator.  Projects specify
-their build process with platform-independent CMake listfiles included
-in each directory of a source tree with the name CMakeLists.txt.
-Users build a project by using CMake to generate a build system for a
-native tool on their platform.
-
-Options
-=======
-
-.. include:: OPTIONS_BUILD.txt
-
-``-E <command> [<options>...]``
- See `Command-Line Tool Mode`_.
-
-``-L[A][H]``
- List non-advanced cached variables.
-
- List cache variables will run CMake and list all the variables from
- the CMake cache that are not marked as INTERNAL or ADVANCED.  This
- will effectively display current CMake settings, which can then be
- changed with -D option.  Changing some of the variables may result
- in more variables being created.  If A is specified, then it will
- display also advanced variables.  If H is specified, it will also
- display help for each variable.
-
-``--build <dir>``
- Build a CMake-generated project binary tree.
-
- This abstracts a native build tool's command-line interface with the
- following options:
-
- ::
-
-   <dir>          = Project binary directory to be built.
-   --target <tgt> = Build <tgt> instead of default targets.
-   --config <cfg> = For multi-configuration tools, choose <cfg>.
-   --clean-first  = Build target 'clean' first, then build.
-                    (To clean only, use --target 'clean'.)
-   --use-stderr   = Ignored.  Behavior is default in CMake >= 3.0.
-   --             = Pass remaining options to the native tool.
-
- Run cmake --build with no options for quick help.
-
-``-N``
- View mode only.
-
- Only load the cache.  Do not actually run configure and generate
- steps.
-
-``-P <file>``
- Process script mode.
-
- Process the given cmake file as a script written in the CMake
- language.  No configure or generate step is performed and the cache
- is not modified.  If variables are defined using -D, this must be
- done before the -P argument.
-
-``--find-package``
- Run in pkg-config like mode.
-
- Search a package using find_package() and print the resulting flags
- to stdout.  This can be used to use cmake instead of pkg-config to
- find installed libraries in plain Makefile-based projects or in
- autoconf-based projects (via share/aclocal/cmake.m4).
-
-``--graphviz=[file]``
- Generate graphviz of dependencies, see CMakeGraphVizOptions.cmake for more.
-
- Generate a graphviz input file that will contain all the library and
- executable dependencies in the project.  See the documentation for
- CMakeGraphVizOptions.cmake for more details.
-
-``--system-information [file]``
- Dump information about this system.
-
- Dump a wide range of information about the current system.  If run
- from the top of a binary tree for a CMake project it will dump
- additional information such as the cache, log files etc.
-
-``--debug-trycompile``
- Do not delete the try_compile build tree. Only useful on one try_compile at a time.
-
- Do not delete the files and directories created for try_compile
- calls.  This is useful in debugging failed try_compiles.  It may
- however change the results of the try-compiles as old junk from a
- previous try-compile may cause a different test to either pass or
- fail incorrectly.  This option is best used for one try-compile at a
- time, and only when debugging.
-
-``--debug-output``
- Put cmake in a debug mode.
-
- Print extra stuff during the cmake run like stack traces with
- message(send_error ) calls.
-
-``--trace``
- Put cmake in trace mode.
-
- Print a trace of all calls made and from where with
- message(send_error ) calls.
-
-``--warn-uninitialized``
- Warn about uninitialized values.
-
- Print a warning when an uninitialized variable is used.
-
-``--warn-unused-vars``
- Warn about unused variables.
-
- Find variables that are declared or set, but not used.
-
-``--no-warn-unused-cli``
- Don't warn about command line options.
-
- Don't find variables that are declared on the command line, but not
- used.
-
-``--check-system-vars``
- Find problems with variable usage in system files.
-
- Normally, unused and uninitialized variables are searched for only
- in CMAKE_SOURCE_DIR and CMAKE_BINARY_DIR.  This flag tells CMake to
- warn about other files as well.
-
-.. include:: OPTIONS_HELP.txt
-
-Command-Line Tool Mode
-======================
-
-CMake provides builtin command-line tools through the signature::
-
- cmake -E <command> [<options>...]
-
-Run ``cmake -E`` or ``cmake -E help`` for a summary of commands.
-Available commands are:
-
-``chdir <dir> <cmd> [<arg>...]``
-  Change the current working directory and run a command.
-
-``compare_files <file1> <file2>``
-  Check if file1 is same as file2.
-
-``copy <file> <destination>``
-  Copy file to destination (either file or directory).
-
-``copy_directory <source> <destination>``
-  Copy directory 'source' content to directory 'destination'.
-
-``copy_if_different <in-file> <out-file>``
-  Copy file if input has changed.
-
-``echo [<string>...]``
-  Displays arguments as text.
-
-``echo_append [<string>...]``
-  Displays arguments as text but no new line.
-
-``env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...``
-  Run command in a modified environment.
-
-``environment``
-  Display the current environment.
-
-``make_directory <dir>``
-  Create a directory.
-
-``md5sum [<file>...]``
-  Compute md5sum of files.
-
-``remove [-f] [<file>...]``
-  Remove the file(s), use ``-f`` to force it.
-
-``remove_directory <dir>``
-  Remove a directory and its contents.
-
-``rename <oldname> <newname>``
-  Rename a file or directory (on one volume).
-
-``sleep <number>...``
-  Sleep for given number of seconds.
-
-``tar [cxt][vf][zjJ] file.tar [<options>...] [--] [<file>...]``
-  Create or extract a tar or zip archive.  Options are:
-
-  ``--``
-    Stop interpreting options and treat all remaining arguments
-    as file names even if they start in ``-``.
-  ``--files-from=<file>``
-    Read file names from the given file, one per line.
-    Blank lines are ignored.  Lines may not start in ``-``
-    except for ``--add-file=<name>`` to add files whose
-    names start in ``-``.
-  ``--mtime=<date>``
-    Specify modification time recorded in tarball entries.
-
-``time <command> [<args>...]``
-  Run command and return elapsed time.
-
-``touch <file>``
-  Touch a file.
-
-``touch_nocreate <file>``
-  Touch a file if it exists but do not create it.
-
-UNIX-specific Command-Line Tools
---------------------------------
-
-The following ``cmake -E`` commands are available only on UNIX:
-
-``create_symlink <old> <new>``
-  Create a symbolic link ``<new>`` naming ``<old>``.
-
-Windows-specific Command-Line Tools
------------------------------------
-
-The following ``cmake -E`` commands are available only on Windows:
-
-``delete_regv <key>``
-  Delete Windows registry value.
-
-``env_vs8_wince <sdkname>``
-  Displays a batch file which sets the environment for the provided
-  Windows CE SDK installed in VS2005.
-
-``env_vs9_wince <sdkname>``
-  Displays a batch file which sets the environment for the provided
-  Windows CE SDK installed in VS2008.
-
-``write_regv <key> <value>``
-  Write Windows registry value.
-
-See Also
-========
-
-.. include:: LINKS.txt
diff --git a/share/cmake-3.2/Help/manual/cpack.1.rst b/share/cmake-3.2/Help/manual/cpack.1.rst
deleted file mode 100644
index ba2086e..0000000
--- a/share/cmake-3.2/Help/manual/cpack.1.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-.. cmake-manual-description: CPack Command-Line Reference
-
-cpack(1)
-********
-
-Synopsis
-========
-
-.. parsed-literal::
-
- cpack -G <generator> [<options>]
-
-Description
-===========
-
-The "cpack" executable is the CMake packaging program.
-CMake-generated build trees created for projects that use the
-INSTALL_* commands have packaging support.  This program will generate
-the package.
-
-CMake is a cross-platform build system generator.  Projects specify
-their build process with platform-independent CMake listfiles included
-in each directory of a source tree with the name CMakeLists.txt.
-Users build a project by using CMake to generate a build system for a
-native tool on their platform.
-
-Options
-=======
-
-``-G <generator>``
- Use the specified generator to generate package.
-
- CPack may support multiple native packaging systems on certain
- platforms.  A generator is responsible for generating input files
- for particular system and invoking that systems.  Possible generator
- names are specified in the Generators section.
-
-``-C <Configuration>``
- Specify the project configuration
-
- This option specifies the configuration that the project was build
- with, for example 'Debug', 'Release'.
-
-``-D <var>=<value>``
- Set a CPack variable.
-
- Set a variable that can be used by the generator.
-
-``--config <config file>``
- Specify the config file.
-
- Specify the config file to use to create the package.  By default
- CPackConfig.cmake in the current directory will be used.
-
-``--verbose,-V``
- enable verbose output
-
- Run cpack with verbose output.
-
-``--debug``
- enable debug output (for CPack developers)
-
- Run cpack with debug output (for CPack developers).
-
-``-P <package name>``
- override/define CPACK_PACKAGE_NAME
-
- If the package name is not specified on cpack commmand line
- thenCPack.cmake defines it as CMAKE_PROJECT_NAME
-
-``-R <package version>``
- override/define CPACK_PACKAGE_VERSION
-
- If version is not specified on cpack command line thenCPack.cmake
- defines it from CPACK_PACKAGE_VERSION_[MAJOR|MINOR|PATCH]look into
- CPack.cmake for detail
-
-``-B <package directory>``
- override/define CPACK_PACKAGE_DIRECTORY
-
- The directory where CPack will be doing its packaging work.The
- resulting package will be found there.  Inside this directoryCPack
- creates '_CPack_Packages' sub-directory which is theCPack temporary
- directory.
-
-``--vendor <vendor name>``
- override/define CPACK_PACKAGE_VENDOR
-
- If vendor is not specified on cpack command line (or inside
- CMakeLists.txt) thenCPack.cmake defines it with a default value
-
-.. include:: OPTIONS_HELP.txt
-
-See Also
-========
-
-.. include:: LINKS.txt
diff --git a/share/cmake-3.2/Help/manual/ctest.1.rst b/share/cmake-3.2/Help/manual/ctest.1.rst
deleted file mode 100644
index cc132c2..0000000
--- a/share/cmake-3.2/Help/manual/ctest.1.rst
+++ /dev/null
@@ -1,993 +0,0 @@
-.. cmake-manual-description: CTest Command-Line Reference
-
-ctest(1)
-********
-
-Synopsis
-========
-
-.. parsed-literal::
-
- ctest [<options>]
-
-Description
-===========
-
-The "ctest" executable is the CMake test driver program.
-CMake-generated build trees created for projects that use the
-ENABLE_TESTING and ADD_TEST commands have testing support.  This
-program will run the tests and report results.
-
-Options
-=======
-
-``-C <cfg>, --build-config <cfg>``
- Choose configuration to test.
-
- Some CMake-generated build trees can have multiple build
- configurations in the same tree.  This option can be used to specify
- which one should be tested.  Example configurations are "Debug" and
- "Release".
-
-``-V,--verbose``
- Enable verbose output from tests.
-
- Test output is normally suppressed and only summary information is
- displayed.  This option will show all test output.
-
-``-VV,--extra-verbose``
- Enable more verbose output from tests.
-
- Test output is normally suppressed and only summary information is
- displayed.  This option will show even more test output.
-
-``--debug``
- Displaying more verbose internals of CTest.
-
- This feature will result in a large number of output that is mostly
- useful for debugging dashboard problems.
-
-``--output-on-failure``
- Output anything outputted by the test program if the test should fail.  This option can also be enabled by setting the environment variable CTEST_OUTPUT_ON_FAILURE
-
-``-F``
- Enable failover.
-
- This option allows ctest to resume a test set execution that was
- previously interrupted.  If no interruption occurred, the -F option
- will have no effect.
-
-``-j <jobs>, --parallel <jobs>``
- Run the tests in parallel using the given number of jobs.
-
- This option tells ctest to run the tests in parallel using given
- number of jobs.  This option can also be set by setting the
- environment variable CTEST_PARALLEL_LEVEL.
-
-``-Q,--quiet``
- Make ctest quiet.
-
- This option will suppress all the output.  The output log file will
- still be generated if the --output-log is specified.  Options such
- as --verbose, --extra-verbose, and --debug are ignored if --quiet is
- specified.
-
-``-O <file>, --output-log <file>``
- Output to log file
-
- This option tells ctest to write all its output to a log file.
-
-``-N,--show-only``
- Disable actual execution of tests.
-
- This option tells ctest to list the tests that would be run but not
- actually run them.  Useful in conjunction with the -R and -E
- options.
-
-``-L <regex>, --label-regex <regex>``
- Run tests with labels matching regular expression.
-
- This option tells ctest to run only the tests whose labels match the
- given regular expression.
-
-``-R <regex>, --tests-regex <regex>``
- Run tests matching regular expression.
-
- This option tells ctest to run only the tests whose names match the
- given regular expression.
-
-``-E <regex>, --exclude-regex <regex>``
- Exclude tests matching regular expression.
-
- This option tells ctest to NOT run the tests whose names match the
- given regular expression.
-
-``-LE <regex>, --label-exclude <regex>``
- Exclude tests with labels matching regular expression.
-
- This option tells ctest to NOT run the tests whose labels match the
- given regular expression.
-
-``-D <dashboard>, --dashboard <dashboard>``
- Execute dashboard test
-
- This option tells ctest to act as a CDash client and perform a
- dashboard test.  All tests are <Mode><Test>, where Mode can be
- Experimental, Nightly, and Continuous, and Test can be Start,
- Update, Configure, Build, Test, Coverage, and Submit.
-
-``-D <var>:<type>=<value>``
- Define a variable for script mode
-
- Pass in variable values on the command line.  Use in conjunction
- with -S to pass variable values to a dashboard script.  Parsing -D
- arguments as variable values is only attempted if the value
- following -D does not match any of the known dashboard types.
-
-``-M <model>, --test-model <model>``
- Sets the model for a dashboard
-
- This option tells ctest to act as a CDash client where the TestModel
- can be Experimental, Nightly, and Continuous.  Combining -M and -T
- is similar to -D
-
-``-T <action>, --test-action <action>``
- Sets the dashboard action to perform
-
- This option tells ctest to act as a CDash client and perform some
- action such as start, build, test etc.  Combining -M and -T is
- similar to -D
-
-``--track <track>``
- Specify the track to submit dashboard to
-
- Submit dashboard to specified track instead of default one.  By
- default, the dashboard is submitted to Nightly, Experimental, or
- Continuous track, but by specifying this option, the track can be
- arbitrary.
-
-``-S <script>, --script <script>``
- Execute a dashboard for a configuration
-
- This option tells ctest to load in a configuration script which sets
- a number of parameters such as the binary and source directories.
- Then ctest will do what is required to create and run a dashboard.
- This option basically sets up a dashboard and then runs ctest -D
- with the appropriate options.
-
-``-SP <script>, --script-new-process <script>``
- Execute a dashboard for a configuration
-
- This option does the same operations as -S but it will do them in a
- separate process.  This is primarily useful in cases where the
- script may modify the environment and you do not want the modified
- environment to impact other -S scripts.
-
-``-A <file>, --add-notes <file>``
- Add a notes file with submission
-
- This option tells ctest to include a notes file when submitting
- dashboard.
-
-``-I [Start,End,Stride,test#,test#|Test file], --tests-information``
- Run a specific number of tests by number.
-
- This option causes ctest to run tests starting at number Start,
- ending at number End, and incrementing by Stride.  Any additional
- numbers after Stride are considered individual test numbers.  Start,
- End,or stride can be empty.  Optionally a file can be given that
- contains the same syntax as the command line.
-
-``-U, --union``
- Take the Union of -I and -R
-
- When both -R and -I are specified by default the intersection of
- tests are run.  By specifying -U the union of tests is run instead.
-
-``--rerun-failed``
- Run only the tests that failed previously
-
- This option tells ctest to perform only the tests that failed during
- its previous run.  When this option is specified, ctest ignores all
- other options intended to modify the list of tests to run (-L, -R,
- -E, -LE, -I, etc).  In the event that CTest runs and no tests fail,
- subsequent calls to ctest with the --rerun-failed option will run
- the set of tests that most recently failed (if any).
-
-``--max-width <width>``
- Set the max width for a test name to output
-
- Set the maximum width for each test name to show in the output.
- This allows the user to widen the output to avoid clipping the test
- name which can be very annoying.
-
-``--interactive-debug-mode [0|1]``
- Set the interactive mode to 0 or 1.
-
- This option causes ctest to run tests in either an interactive mode
- or a non-interactive mode.  On Windows this means that in
- non-interactive mode, all system debug pop up windows are blocked.
- In dashboard mode (Experimental, Nightly, Continuous), the default
- is non-interactive.  When just running tests not for a dashboard the
- default is to allow popups and interactive debugging.
-
-``--no-label-summary``
- Disable timing summary information for labels.
-
- This option tells ctest not to print summary information for each
- label associated with the tests run.  If there are no labels on the
- tests, nothing extra is printed.
-
-``--build-and-test``
- Configure, build and run a test.
-
- This option tells ctest to configure (i.e.  run cmake on), build,
- and or execute a test.  The configure and test steps are optional.
- The arguments to this command line are the source and binary
- directories.  By default this will run CMake on the Source/Bin
- directories specified unless --build-nocmake is specified.
- The --build-generator option *must* be provided to use
- --build-and-test.  If --test-command is specified then that will be
- run after the build is complete.  Other options that affect this
- mode are --build-target --build-nocmake, --build-run-dir,
- --build-two-config, --build-exe-dir,
- --build-project,--build-noclean, --build-options
-
-``--build-target``
- Specify a specific target to build.
-
- This option goes with the --build-and-test option, if left out the
- all target is built.
-
-``--build-nocmake``
- Run the build without running cmake first.
-
- Skip the cmake step.
-
-``--build-run-dir``
- Specify directory to run programs from.
-
- Directory where programs will be after it has been compiled.
-
-``--build-two-config``
- Run CMake twice
-
-``--build-exe-dir``
- Specify the directory for the executable.
-
-``--build-generator``
- Specify the generator to use.
-
-``--build-generator-platform``
- Specify the generator-specific platform.
-
-``--build-generator-toolset``
- Specify the generator-specific toolset.
-
-``--build-project``
- Specify the name of the project to build.
-
-``--build-makeprogram``
- Override the make program chosen by CTest with a given one.
-
-``--build-noclean``
- Skip the make clean step.
-
-``--build-config-sample``
- A sample executable to use to determine the configuration
-
- A sample executable to use to determine the configuration that
- should be used.  e.g.  Debug/Release/etc
-
-``--build-options``
- Add extra options to the build step.
-
- This option must be the last option with the exception of
- --test-command
-
-``--test-command``
- The test to run with the --build-and-test option.
-
-``--test-timeout``
- The time limit in seconds, internal use only.
-
-``--tomorrow-tag``
- Nightly or experimental starts with next day tag.
-
- This is useful if the build will not finish in one day.
-
-``--ctest-config``
- The configuration file used to initialize CTest state when submitting dashboards.
-
- This option tells CTest to use different initialization file instead
- of CTestConfiguration.tcl.  This way multiple initialization files
- can be used for example to submit to multiple dashboards.
-
-``--overwrite``
- Overwrite CTest configuration option.
-
- By default ctest uses configuration options from configuration file.
- This option will overwrite the configuration option.
-
-``--extra-submit <file>[;<file>]``
- Submit extra files to the dashboard.
-
- This option will submit extra files to the dashboard.
-
-``--force-new-ctest-process``
- Run child CTest instances as new processes
-
- By default CTest will run child CTest instances within the same
- process.  If this behavior is not desired, this argument will
- enforce new processes for child CTest processes.
-
-``--schedule-random``
- Use a random order for scheduling tests
-
- This option will run the tests in a random order.  It is commonly
- used to detect implicit dependencies in a test suite.
-
-``--submit-index``
- Legacy option for old Dart2 dashboard server feature.
- Do not use.
-
-``--timeout <seconds>``
- Set a global timeout on all tests.
-
- This option will set a global timeout on all tests that do not
- already have a timeout set on them.
-
-``--stop-time <time>``
- Set a time at which all tests should stop running.
-
- Set a real time of day at which all tests should timeout.  Example:
- 7:00:00 -0400.  Any time format understood by the curl date parser
- is accepted.  Local time is assumed if no timezone is specified.
-
-``--http1.0``
- Submit using HTTP 1.0.
-
- This option will force CTest to use HTTP 1.0 to submit files to the
- dashboard, instead of HTTP 1.1.
-
-``--no-compress-output``
- Do not compress test output when submitting.
-
- This flag will turn off automatic compression of test output.  Use
- this to maintain compatibility with an older version of CDash which
- doesn't support compressed test output.
-
-``--print-labels``
- Print all available test labels.
-
- This option will not run any tests, it will simply print the list of
- all labels associated with the test set.
-
-.. include:: OPTIONS_HELP.txt
-
-Dashboard Client
-================
-
-CTest can operate as a client for the `CDash`_ software quality dashboard
-application.  As a dashboard client, CTest performs a sequence of steps
-to configure, build, and test software, and then submits the results to
-a `CDash`_ server.
-
-.. _`CDash`: http://cdash.org/
-
-Dashboard Client Steps
-----------------------
-
-CTest defines an ordered list of testing steps of which some or all may
-be run as a dashboard client:
-
-``Start``
-  Start a new dashboard submission to be composed of results recorded
-  by the following steps.
-  See the `CTest Start Step`_ section below.
-
-``Update``
-  Update the source tree from its version control repository.
-  Record the old and new versions and the list of updated source files.
-  See the `CTest Update Step`_ section below.
-
-``Configure``
-  Configure the software by running a command in the build tree.
-  Record the configuration output log.
-  See the `CTest Configure Step`_ section below.
-
-``Build``
-  Build the software by running a command in the build tree.
-  Record the build output log and detect warnings and errors.
-  See the `CTest Build Step`_ section below.
-
-``Test``
-  Test the software by loading a ``CTestTestfile.cmake``
-  from the build tree and executing the defined tests.
-  Record the output and result of each test.
-  See the `CTest Test Step`_ section below.
-
-``Coverage``
-  Compute coverage of the source code by running a coverage
-  analysis tool and recording its output.
-  See the `CTest Coverage Step`_ section below.
-
-``MemCheck``
-  Run the software test suite through a memory check tool.
-  Record the test output, results, and issues reported by the tool.
-  See the `CTest MemCheck Step`_ section below.
-
-``Submit``
-  Submit results recorded from other testing steps to the
-  software quality dashboard server.
-  See the `CTest Submit Step`_ section below.
-
-Dashboard Client Modes
-----------------------
-
-CTest defines three modes of operation as a dashboard client:
-
-``Nightly``
-  This mode is intended to be invoked once per day, typically at night.
-  It enables the ``Start``, ``Update``, ``Configure``, ``Build``, ``Test``,
-  ``Coverage``, and ``Submit`` steps by default.  Selected steps run even
-  if the ``Update`` step reports no changes to the source tree.
-
-``Continuous``
-  This mode is intended to be invoked repeatedly throughout the day.
-  It enables the ``Start``, ``Update``, ``Configure``, ``Build``, ``Test``,
-  ``Coverage``, and ``Submit`` steps by default, but exits after the
-  ``Update`` step if it reports no changes to the source tree.
-
-``Experimental``
-  This mode is intended to be invoked by a developer to test local changes.
-  It enables the ``Start``, ``Configure``, ``Build``, ``Test``, ``Coverage``,
-  and ``Submit`` steps by default.
-
-Dashboard Client via CTest Command-Line
----------------------------------------
-
-CTest can perform testing on an already-generated build tree.
-Run the ``ctest`` command with the current working directory set
-to the build tree and use one of these signatures::
-
-  ctest -D <mode>[<step>]
-  ctest -M <mode> [ -T <step> ]...
-
-The ``<mode>`` must be one of the above `Dashboard Client Modes`_,
-and each ``<step>`` must be one of the above `Dashboard Client Steps`_.
-
-CTest reads the `Dashboard Client Configuration`_ settings from
-a file in the build tree called either ``CTestConfiguration.ini``
-or ``DartConfiguration.tcl`` (the names are historical).  The format
-of the file is::
-
-  # Lines starting in '#' are comments.
-  # Other non-blank lines are key-value pairs.
-  <setting>: <value>
-
-where ``<setting>`` is the setting name and ``<value>`` is the
-setting value.
-
-In build trees generated by CMake, this configuration file is
-generated by the :module:`CTest` module if included by the project.
-The module uses variables to obtain a value for each setting
-as documented with the settings below.
-
-.. _`CTest Script`:
-
-Dashboard Client via CTest Script
----------------------------------
-
-CTest can perform testing driven by a :manual:`cmake-language(7)`
-script that creates and maintains the source and build tree as
-well as performing the testing steps.  Run the ``ctest`` command
-with the current working directory set outside of any build tree
-and use one of these signatures::
-
-  ctest -S <script>
-  ctest -SP <script>
-
-The ``<script>`` file must call :ref:`CTest Commands` commands
-to run testing steps explicitly as documented below.  The commands
-obtain `Dashboard Client Configuration`_ settings from their
-arguments or from variables set in the script.
-
-Dashboard Client Configuration
-==============================
-
-The `Dashboard Client Steps`_ may be configured by named
-settings as documented in the following sections.
-
-.. _`CTest Start Step`:
-
-CTest Start Step
-----------------
-
-Start a new dashboard submission to be composed of results recorded
-by the following steps.
-
-In a `CTest Script`_, the :command:`ctest_start` command runs this step.
-Arguments to the command may specify some of the step settings.
-The command first runs the command-line specified by the
-``CTEST_CHECKOUT_COMMAND`` variable, if set, to initialize the source
-directory.
-
-Configuration settings include:
-
-``BuildDirectory``
-  The full path to the project build tree.
-
-  * `CTest Script`_ variable: :variable:`CTEST_BINARY_DIRECTORY`
-  * :module:`CTest` module variable: :variable:`PROJECT_BINARY_DIR`
-
-``SourceDirectory``
-  The full path to the project source tree.
-
-  * `CTest Script`_ variable: :variable:`CTEST_SOURCE_DIRECTORY`
-  * :module:`CTest` module variable: :variable:`PROJECT_SOURCE_DIR`
-
-.. _`CTest Update Step`:
-
-CTest Update Step
------------------
-
-In a `CTest Script`_, the :command:`ctest_update` command runs this step.
-Arguments to the command may specify some of the step settings.
-
-Configuration settings to specify the version control tool include:
-
-``BZRCommand``
-  ``bzr`` command-line tool to use if source tree is managed by Bazaar.
-
-  * `CTest Script`_ variable: :variable:`CTEST_BZR_COMMAND`
-  * :module:`CTest` module variable: none
-
-``BZRUpdateOptions``
-  Command-line options to the ``BZRCommand`` when updating the source.
-
-  * `CTest Script`_ variable: :variable:`CTEST_BZR_UPDATE_OPTIONS`
-  * :module:`CTest` module variable: none
-
-``CVSCommand``
-  ``cvs`` command-line tool to use if source tree is managed by CVS.
-
-  * `CTest Script`_ variable: :variable:`CTEST_CVS_COMMAND`
-  * :module:`CTest` module variable: ``CVSCOMMAND``
-
-``CVSUpdateOptions``
-  Command-line options to the ``CVSCommand`` when updating the source.
-
-  * `CTest Script`_ variable: :variable:`CTEST_CVS_UPDATE_OPTIONS`
-  * :module:`CTest` module variable: ``CVS_UPDATE_OPTIONS``
-
-``GITCommand``
-  ``git`` command-line tool to use if source tree is managed by Git.
-
-  * `CTest Script`_ variable: :variable:`CTEST_GIT_COMMAND`
-  * :module:`CTest` module variable: ``GITCOMMAND``
-
-``GITUpdateCustom``
-  Specify a semicolon-separated list of custom command lines to run
-  in the source tree (Git work tree) to update it instead of running
-  the ``GITCommand``.
-
-  * `CTest Script`_ variable: :variable:`CTEST_GIT_UPDATE_CUSTOM`
-  * :module:`CTest` module variable: ``CTEST_GIT_UPDATE_CUSTOM``
-
-``GITUpdateOptions``
-  Command-line options to the ``GITCommand`` when updating the source.
-
-  * `CTest Script`_ variable: :variable:`CTEST_GIT_UPDATE_OPTIONS`
-  * :module:`CTest` module variable: ``GIT_UPDATE_OPTIONS``
-
-``HGCommand``
-  ``hg`` command-line tool to use if source tree is managed by Mercurial.
-
-  * `CTest Script`_ variable: :variable:`CTEST_HG_COMMAND`
-  * :module:`CTest` module variable: none
-
-``HGUpdateOptions``
-  Command-line options to the ``HGCommand`` when updating the source.
-
-  * `CTest Script`_ variable: :variable:`CTEST_HG_UPDATE_OPTIONS`
-  * :module:`CTest` module variable: none
-
-``P4Client``
-  Value of the ``-c`` option to the ``P4Command``.
-
-  * `CTest Script`_ variable: :variable:`CTEST_P4_CLIENT`
-  * :module:`CTest` module variable: ``CTEST_P4_CLIENT``
-
-``P4Command``
-  ``p4`` command-line tool to use if source tree is managed by Perforce.
-
-  * `CTest Script`_ variable: :variable:`CTEST_P4_COMMAND`
-  * :module:`CTest` module variable: ``P4COMMAND``
-
-``P4Options``
-  Command-line options to the ``P4Command`` for all invocations.
-
-  * `CTest Script`_ variable: :variable:`CTEST_P4_OPTIONS`
-  * :module:`CTest` module variable: ``CTEST_P4_OPTIONS``
-
-``P4UpdateCustom``
-  Specify a semicolon-separated list of custom command lines to run
-  in the source tree (Perforce tree) to update it instead of running
-  the ``P4Command``.
-
-  * `CTest Script`_ variable: none
-  * :module:`CTest` module variable: ``CTEST_P4_UPDATE_CUSTOM``
-
-``P4UpdateOptions``
-  Command-line options to the ``P4Command`` when updating the source.
-
-  * `CTest Script`_ variable: :variable:`CTEST_P4_UPDATE_OPTIONS`
-  * :module:`CTest` module variable: ``CTEST_P4_UPDATE_OPTIONS``
-
-``SVNCommand``
-  ``svn`` command-line tool to use if source tree is managed by Subversion.
-
-  * `CTest Script`_ variable: :variable:`CTEST_SVN_COMMAND`
-  * :module:`CTest` module variable: ``SVNCOMMAND``
-
-``SVNOptions``
-  Command-line options to the ``SVNCommand`` for all invocations.
-
-  * `CTest Script`_ variable: :variable:`CTEST_SVN_OPTIONS`
-  * :module:`CTest` module variable: ``CTEST_SVN_OPTIONS``
-
-``SVNUpdateOptions``
-  Command-line options to the ``SVNCommand`` when updating the source.
-
-  * `CTest Script`_ variable: :variable:`CTEST_SVN_UPDATE_OPTIONS`
-  * :module:`CTest` module variable: ``SVN_UPDATE_OPTIONS``
-
-``UpdateCommand``
-  Specify the version-control command-line tool to use without
-  detecting the VCS that manages the source tree.
-
-  * `CTest Script`_ variable: :variable:`CTEST_UPDATE_COMMAND`
-  * :module:`CTest` module variable: ``<VCS>COMMAND``
-    when ``UPDATE_TYPE`` is ``<vcs>``, else ``UPDATE_COMMAND``
-
-``UpdateOptions``
-  Command-line options to the ``UpdateCommand``.
-
-  * `CTest Script`_ variable: :variable:`CTEST_UPDATE_OPTIONS`
-  * :module:`CTest` module variable: ``<VCS>_UPDATE_OPTIONS``
-    when ``UPDATE_TYPE`` is ``<vcs>``, else ``UPDATE_OPTIONS``
-
-``UpdateType``
-  Specify the version-control system that manages the source
-  tree if it cannot be detected automatically.
-  The value may be ``bzr``, ``cvs``, ``git``, ``hg``,
-  ``p4``, or ``svn``.
-
-  * `CTest Script`_ variable: none, detected from source tree
-  * :module:`CTest` module variable: ``UPDATE_TYPE`` if set,
-    else ``CTEST_UPDATE_TYPE``
-
-``UpdateVersionOnly``
-  Specify that you want the version control update command to only
-  discover the current version that is checked out, and not to update
-  to a different version.
-
-  * `CTest Script`_ variable: :variable:`CTEST_UPDATE_VERSION_ONLY`
-
-
-
-Additional configuration settings include:
-
-``NightlyStartTime``
-  In the ``Nightly`` dashboard mode, specify the "nightly start time".
-  With centralized version control systems (``cvs`` and ``svn``),
-  the ``Update`` step checks out the version of the software as of
-  this time so that multiple clients choose a common version to test.
-  This is not well-defined in distributed version-control systems so
-  the setting is ignored.
-
-  * `CTest Script`_ variable: :variable:`CTEST_NIGHTLY_START_TIME`
-  * :module:`CTest` module variable: ``NIGHTLY_START_TIME`` if set,
-    else ``CTEST_NIGHTLY_START_TIME``
-
-.. _`CTest Configure Step`:
-
-CTest Configure Step
---------------------
-
-In a `CTest Script`_, the :command:`ctest_configure` command runs this step.
-Arguments to the command may specify some of the step settings.
-
-Configuration settings include:
-
-``ConfigureCommand``
-  Command-line to launch the software configuration process.
-  It will be executed in the location specified by the
-  ``BuildDirectory`` setting.
-
-  * `CTest Script`_ variable: :variable:`CTEST_CONFIGURE_COMMAND`
-  * :module:`CTest` module variable: :variable:`CMAKE_COMMAND`
-    followed by :variable:`PROJECT_SOURCE_DIR`
-
-.. _`CTest Build Step`:
-
-CTest Build Step
-----------------
-
-In a `CTest Script`_, the :command:`ctest_build` command runs this step.
-Arguments to the command may specify some of the step settings.
-
-Configuration settings include:
-
-``DefaultCTestConfigurationType``
-  When the build system to be launched allows build-time selection
-  of the configuration (e.g. ``Debug``, ``Release``), this specifies
-  the default configuration to be built when no ``-C`` option is
-  given to the ``ctest`` command.  The value will be substituted into
-  the value of ``MakeCommand`` to replace the literal string
-  ``${CTEST_CONFIGURATION_TYPE}`` if it appears.
-
-  * `CTest Script`_ variable: :variable:`CTEST_CONFIGURATION_TYPE`
-  * :module:`CTest` module variable: ``DEFAULT_CTEST_CONFIGURATION_TYPE``,
-    initialized by the ``CMAKE_CONFIG_TYPE`` environment variable
-
-``MakeCommand``
-  Command-line to launch the software build process.
-  It will be executed in the location specified by the
-  ``BuildDirectory`` setting.
-
-  * `CTest Script`_ variable: :variable:`CTEST_BUILD_COMMAND`
-  * :module:`CTest` module variable: ``MAKECOMMAND``,
-    initialized by the :command:`build_command` command
-
-``UseLaunchers``
-  For build trees generated by CMake using a Makefile generator
-  or the :generator:`Ninja` generator, specify whether the
-  ``CTEST_USE_LAUNCHERS`` feature is enabled by the
-  :module:`CTestUseLaunchers` module (also included by the
-  :module:`CTest` module).  When enabled, the generated build
-  system wraps each invocation of the compiler, linker, or
-  custom command line with a "launcher" that communicates
-  with CTest via environment variables and files to report
-  granular build warning and error information.  Otherwise,
-  CTest must "scrape" the build output log for diagnostics.
-
-  * `CTest Script`_ variable: :variable:`CTEST_USE_LAUNCHERS`
-  * :module:`CTest` module variable: ``CTEST_USE_LAUNCHERS``
-
-.. _`CTest Test Step`:
-
-CTest Test Step
----------------
-
-In a `CTest Script`_, the :command:`ctest_test` command runs this step.
-Arguments to the command may specify some of the step settings.
-
-Configuration settings include:
-
-``TimeOut``
-  The default timeout for each test if not specified by the
-  :prop_test:`TIMEOUT` test property.
-
-  * `CTest Script`_ variable: :variable:`CTEST_TEST_TIMEOUT`
-  * :module:`CTest` module variable: ``DART_TESTING_TIMEOUT``
-
-.. _`CTest Coverage Step`:
-
-CTest Coverage Step
--------------------
-
-In a `CTest Script`_, the :command:`ctest_coverage` command runs this step.
-Arguments to the command may specify some of the step settings.
-
-Configuration settings include:
-
-``CoverageCommand``
-  Command-line tool to perform software coverage analysis.
-  It will be executed in the location specified by the
-  ``BuildDirectory`` setting.
-
-  * `CTest Script`_ variable: :variable:`CTEST_COVERAGE_COMMAND`
-  * :module:`CTest` module variable: ``COVERAGE_COMMAND``
-
-``CoverageExtraFlags``
-  Specify command-line options to the ``CoverageCommand`` tool.
-
-  * `CTest Script`_ variable: :variable:`CTEST_COVERAGE_EXTRA_FLAGS`
-  * :module:`CTest` module variable: ``COVERAGE_EXTRA_FLAGS``
-
-.. _`CTest MemCheck Step`:
-
-CTest MemCheck Step
--------------------
-
-In a `CTest Script`_, the :command:`ctest_memcheck` command runs this step.
-Arguments to the command may specify some of the step settings.
-
-Configuration settings include:
-
-``MemoryCheckCommand``
-  Command-line tool to perform dynamic analysis.  Test command lines
-  will be launched through this tool.
-
-  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_COMMAND`
-  * :module:`CTest` module variable: ``MEMORYCHECK_COMMAND``
-
-``MemoryCheckCommandOptions``
-  Specify command-line options to the ``MemoryCheckCommand`` tool.
-  They will be placed prior to the test command line.
-
-  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_COMMAND_OPTIONS`
-  * :module:`CTest` module variable: ``MEMORYCHECK_COMMAND_OPTIONS``
-
-``MemoryCheckType``
-  Specify the type of memory checking to perform.
-
-  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_TYPE`
-  * :module:`CTest` module variable: ``MEMORYCHECK_TYPE``
-
-``MemoryCheckSanitizerOptions``
-  Specify options to sanitizers when running with a sanitize-enabled build.
-
-  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_SANITIZER_OPTIONS`
-  * :module:`CTest` module variable: ``MEMORYCHECK_SANITIZER_OPTIONS``
-
-``MemoryCheckSuppressionFile``
-  Specify a file containing suppression rules for the
-  ``MemoryCheckCommand`` tool.  It will be passed with options
-  appropriate to the tool.
-
-  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_SUPPRESSIONS_FILE`
-  * :module:`CTest` module variable: ``MEMORYCHECK_SUPPRESSIONS_FILE``
-
-Additional configuration settings include:
-
-``BoundsCheckerCommand``
-  Specify a ``MemoryCheckCommand`` that is known to be command-line
-  compatible with Bounds Checker.
-
-  * `CTest Script`_ variable: none
-  * :module:`CTest` module variable: none
-
-``PurifyCommand``
-  Specify a ``MemoryCheckCommand`` that is known to be command-line
-  compatible with Purify.
-
-  * `CTest Script`_ variable: none
-  * :module:`CTest` module variable: ``PURIFYCOMMAND``
-
-``ValgrindCommand``
-  Specify a ``MemoryCheckCommand`` that is known to be command-line
-  compatible with Valgrind.
-
-  * `CTest Script`_ variable: none
-  * :module:`CTest` module variable: ``VALGRIND_COMMAND``
-
-``ValgrindCommandOptions``
-  Specify command-line options to the ``ValgrindCommand`` tool.
-  They will be placed prior to the test command line.
-
-  * `CTest Script`_ variable: none
-  * :module:`CTest` module variable: ``VALGRIND_COMMAND_OPTIONS``
-
-.. _`CTest Submit Step`:
-
-CTest Submit Step
------------------
-
-In a `CTest Script`_, the :command:`ctest_submit` command runs this step.
-Arguments to the command may specify some of the step settings.
-
-Configuration settings include:
-
-``BuildName``
-  Describe the dashboard client platform with a short string.
-  (Operating system, compiler, etc.)
-
-  * `CTest Script`_ variable: :variable:`CTEST_BUILD_NAME`
-  * :module:`CTest` module variable: ``BUILDNAME``
-
-``CDashVersion``
-  Specify the version of `CDash`_ on the server.
-
-  * `CTest Script`_ variable: none, detected from server
-  * :module:`CTest` module variable: ``CTEST_CDASH_VERSION``
-
-``CTestSubmitRetryCount``
-  Specify a number of attempts to retry submission on network failure.
-
-  * `CTest Script`_ variable: none,
-    use the :command:`ctest_submit` ``RETRY_COUNT`` option.
-  * :module:`CTest` module variable: ``CTEST_SUBMIT_RETRY_COUNT``
-
-``CTestSubmitRetryDelay``
-  Specify a delay before retrying submission on network failure.
-
-  * `CTest Script`_ variable: none,
-    use the :command:`ctest_submit` ``RETRY_DELAY`` option.
-  * :module:`CTest` module variable: ``CTEST_SUBMIT_RETRY_DELAY``
-
-``CurlOptions``
-  Specify a semicolon-separated list of options to control the
-  Curl library that CTest uses internally to connect to the
-  server.  Possible options are ``CURLOPT_SSL_VERIFYPEER_OFF``
-  and ``CURLOPT_SSL_VERIFYHOST_OFF``.
-
-  * `CTest Script`_ variable: :variable:`CTEST_CURL_OPTIONS`
-  * :module:`CTest` module variable: ``CTEST_CURL_OPTIONS``
-
-``DropLocation``
-  The path on the dashboard server to send the submission.
-
-  * `CTest Script`_ variable: :variable:`CTEST_DROP_LOCATION`
-  * :module:`CTest` module variable: ``DROP_LOCATION`` if set,
-    else ``CTEST_DROP_LOCATION``
-
-``DropMethod``
-  Specify the method by which results should be submitted to the
-  dashboard server.  The value may be ``cp``, ``ftp``, ``http``,
-  ``https``, ``scp``, or ``xmlrpc`` (if CMake was built with
-  support for it).
-
-  * `CTest Script`_ variable: :variable:`CTEST_DROP_METHOD`
-  * :module:`CTest` module variable: ``DROP_METHOD`` if set,
-    else ``CTEST_DROP_METHOD``
-
-``DropSite``
-  The dashboard server name
-  (for ``ftp``, ``http``, and ``https``, ``scp``, and ``xmlrpc``).
-
-  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE`
-  * :module:`CTest` module variable: ``DROP_SITE`` if set,
-    else ``CTEST_DROP_SITE``
-
-``DropSitePassword``
-  The dashboard server login password, if any
-  (for ``ftp``, ``http``, and ``https``).
-
-  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE_PASSWORD`
-  * :module:`CTest` module variable: ``DROP_SITE_PASSWORD`` if set,
-    else ``CTEST_DROP_SITE_PASWORD``
-
-``DropSiteUser``
-  The dashboard server login user name, if any
-  (for ``ftp``, ``http``, and ``https``).
-
-  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE_USER`
-  * :module:`CTest` module variable: ``DROP_SITE_USER`` if set,
-    else ``CTEST_DROP_SITE_USER``
-
-``IsCDash``
-  Specify whether the dashboard server is `CDash`_ or an older
-  dashboard server implementation requiring ``TriggerSite``.
-
-  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE_CDASH`
-  * :module:`CTest` module variable: ``CTEST_DROP_SITE_CDASH``
-
-``ScpCommand``
-  ``scp`` command-line tool to use when ``DropMethod`` is ``scp``.
-
-  * `CTest Script`_ variable: :variable:`CTEST_SCP_COMMAND`
-  * :module:`CTest` module variable: ``SCPCOMMAND``
-
-``Site``
-  Describe the dashboard client host site with a short string.
-  (Hostname, domain, etc.)
-
-  * `CTest Script`_ variable: :variable:`CTEST_SITE`
-  * :module:`CTest` module variable: ``SITE``,
-    initialized by the :command:`site_name` command
-
-``TriggerSite``
-  Legacy option to support older dashboard server implementations.
-  Not used when ``IsCDash`` is true.
-
-  * `CTest Script`_ variable: :variable:`CTEST_TRIGGER_SITE`
-  * :module:`CTest` module variable: ``TRIGGER_SITE`` if set,
-    else ``CTEST_TRIGGER_SITE``
-
-See Also
-========
-
-.. include:: LINKS.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0000.rst b/share/cmake-3.2/Help/policy/CMP0000.rst
deleted file mode 100644
index 9fbf842..0000000
--- a/share/cmake-3.2/Help/policy/CMP0000.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-CMP0000
--------
-
-A minimum required CMake version must be specified.
-
-CMake requires that projects specify the version of CMake to which
-they have been written.  This policy has been put in place so users
-trying to build the project may be told when they need to update their
-CMake.  Specifying a version also helps the project build with CMake
-versions newer than that specified.  Use the cmake_minimum_required
-command at the top of your main CMakeLists.txt file:
-
-::
-
-  cmake_minimum_required(VERSION <major>.<minor>)
-
-where "<major>.<minor>" is the version of CMake you want to support
-(such as "2.6").  The command will ensure that at least the given
-version of CMake is running and help newer versions be compatible with
-the project.  See documentation of cmake_minimum_required for details.
-
-Note that the command invocation must appear in the CMakeLists.txt
-file itself; a call in an included file is not sufficient.  However,
-the cmake_policy command may be called to set policy CMP0000 to OLD or
-NEW behavior explicitly.  The OLD behavior is to silently ignore the
-missing invocation.  The NEW behavior is to issue an error instead of
-a warning.  An included file may set CMP0000 explicitly to affect how
-this policy is enforced for the main CMakeLists.txt file.
-
-This policy was introduced in CMake version 2.6.0.
diff --git a/share/cmake-3.2/Help/policy/CMP0001.rst b/share/cmake-3.2/Help/policy/CMP0001.rst
deleted file mode 100644
index 344f1e2..0000000
--- a/share/cmake-3.2/Help/policy/CMP0001.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMP0001
--------
-
-CMAKE_BACKWARDS_COMPATIBILITY should no longer be used.
-
-The OLD behavior is to check CMAKE_BACKWARDS_COMPATIBILITY and present
-it to the user.  The NEW behavior is to ignore
-CMAKE_BACKWARDS_COMPATIBILITY completely.
-
-In CMake 2.4 and below the variable CMAKE_BACKWARDS_COMPATIBILITY was
-used to request compatibility with earlier versions of CMake.  In
-CMake 2.6 and above all compatibility issues are handled by policies
-and the cmake_policy command.  However, CMake must still check
-CMAKE_BACKWARDS_COMPATIBILITY for projects written for CMake 2.4 and
-below.
-
-This policy was introduced in CMake version 2.6.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0002.rst b/share/cmake-3.2/Help/policy/CMP0002.rst
deleted file mode 100644
index 2c15bd4..0000000
--- a/share/cmake-3.2/Help/policy/CMP0002.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-CMP0002
--------
-
-Logical target names must be globally unique.
-
-Targets names created with add_executable, add_library, or
-add_custom_target are logical build target names.  Logical target
-names must be globally unique because:
-
-::
-
-  - Unique names may be referenced unambiguously both in CMake
-    code and on make tool command lines.
-  - Logical names are used by Xcode and VS IDE generators
-    to produce meaningful project names for the targets.
-
-The logical name of executable and library targets does not have to
-correspond to the physical file names built.  Consider using the
-OUTPUT_NAME target property to create two targets with the same
-physical name while keeping logical names distinct.  Custom targets
-must simply have globally unique names (unless one uses the global
-property ALLOW_DUPLICATE_CUSTOM_TARGETS with a Makefiles generator).
-
-This policy was introduced in CMake version 2.6.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0003.rst b/share/cmake-3.2/Help/policy/CMP0003.rst
deleted file mode 100644
index 27b83f8..0000000
--- a/share/cmake-3.2/Help/policy/CMP0003.rst
+++ /dev/null
@@ -1,102 +0,0 @@
-CMP0003
--------
-
-Libraries linked via full path no longer produce linker search paths.
-
-This policy affects how libraries whose full paths are NOT known are
-found at link time, but was created due to a change in how CMake deals
-with libraries whose full paths are known.  Consider the code
-
-::
-
-  target_link_libraries(myexe /path/to/libA.so)
-
-CMake 2.4 and below implemented linking to libraries whose full paths
-are known by splitting them on the link line into separate components
-consisting of the linker search path and the library name.  The
-example code might have produced something like
-
-::
-
-  ... -L/path/to -lA ...
-
-in order to link to library A.  An analysis was performed to order
-multiple link directories such that the linker would find library A in
-the desired location, but there are cases in which this does not work.
-CMake versions 2.6 and above use the more reliable approach of passing
-the full path to libraries directly to the linker in most cases.  The
-example code now produces something like
-
-::
-
-  ... /path/to/libA.so ....
-
-Unfortunately this change can break code like
-
-::
-
-  target_link_libraries(myexe /path/to/libA.so B)
-
-where "B" is meant to find "/path/to/libB.so".  This code is wrong
-because the user is asking the linker to find library B but has not
-provided a linker search path (which may be added with the
-link_directories command).  However, with the old linking
-implementation the code would work accidentally because the linker
-search path added for library A allowed library B to be found.
-
-In order to support projects depending on linker search paths added by
-linking to libraries with known full paths, the OLD behavior for this
-policy will add the linker search paths even though they are not
-needed for their own libraries.  When this policy is set to OLD, CMake
-will produce a link line such as
-
-::
-
-  ... -L/path/to /path/to/libA.so -lB ...
-
-which will allow library B to be found as it was previously.  When
-this policy is set to NEW, CMake will produce a link line such as
-
-::
-
-  ... /path/to/libA.so -lB ...
-
-which more accurately matches what the project specified.
-
-The setting for this policy used when generating the link line is that
-in effect when the target is created by an add_executable or
-add_library command.  For the example described above, the code
-
-::
-
-  cmake_policy(SET CMP0003 OLD) # or cmake_policy(VERSION 2.4)
-  add_executable(myexe myexe.c)
-  target_link_libraries(myexe /path/to/libA.so B)
-
-will work and suppress the warning for this policy.  It may also be
-updated to work with the corrected linking approach:
-
-::
-
-  cmake_policy(SET CMP0003 NEW) # or cmake_policy(VERSION 2.6)
-  link_directories(/path/to) # needed to find library B
-  add_executable(myexe myexe.c)
-  target_link_libraries(myexe /path/to/libA.so B)
-
-Even better, library B may be specified with a full path:
-
-::
-
-  add_executable(myexe myexe.c)
-  target_link_libraries(myexe /path/to/libA.so /path/to/libB.so)
-
-When all items on the link line have known paths CMake does not check
-this policy so it has no effect.
-
-Note that the warning for this policy will be issued for at most one
-target.  This avoids flooding users with messages for every target
-when setting the policy once will probably fix all targets.
-
-This policy was introduced in CMake version 2.6.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0004.rst b/share/cmake-3.2/Help/policy/CMP0004.rst
deleted file mode 100644
index 80045f5..0000000
--- a/share/cmake-3.2/Help/policy/CMP0004.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-CMP0004
--------
-
-Libraries linked may not have leading or trailing whitespace.
-
-CMake versions 2.4 and below silently removed leading and trailing
-whitespace from libraries linked with code like
-
-::
-
-  target_link_libraries(myexe " A ")
-
-This could lead to subtle errors in user projects.
-
-The OLD behavior for this policy is to silently remove leading and
-trailing whitespace.  The NEW behavior for this policy is to diagnose
-the existence of such whitespace as an error.  The setting for this
-policy used when checking the library names is that in effect when the
-target is created by an add_executable or add_library command.
-
-This policy was introduced in CMake version 2.6.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0005.rst b/share/cmake-3.2/Help/policy/CMP0005.rst
deleted file mode 100644
index c11a9e6..0000000
--- a/share/cmake-3.2/Help/policy/CMP0005.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-CMP0005
--------
-
-Preprocessor definition values are now escaped automatically.
-
-This policy determines whether or not CMake should generate escaped
-preprocessor definition values added via add_definitions.  CMake
-versions 2.4 and below assumed that only trivial values would be given
-for macros in add_definitions calls.  It did not attempt to escape
-non-trivial values such as string literals in generated build rules.
-CMake versions 2.6 and above support escaping of most values, but
-cannot assume the user has not added escapes already in an attempt to
-work around limitations in earlier versions.
-
-The OLD behavior for this policy is to place definition values given
-to add_definitions directly in the generated build rules without
-attempting to escape anything.  The NEW behavior for this policy is to
-generate correct escapes for all native build tools automatically.
-See documentation of the COMPILE_DEFINITIONS target property for
-limitations of the escaping implementation.
-
-This policy was introduced in CMake version 2.6.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0006.rst b/share/cmake-3.2/Help/policy/CMP0006.rst
deleted file mode 100644
index 8d1e5bd..0000000
--- a/share/cmake-3.2/Help/policy/CMP0006.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-CMP0006
--------
-
-Installing MACOSX_BUNDLE targets requires a BUNDLE DESTINATION.
-
-This policy determines whether the install(TARGETS) command must be
-given a BUNDLE DESTINATION when asked to install a target with the
-MACOSX_BUNDLE property set.  CMake 2.4 and below did not distinguish
-application bundles from normal executables when installing targets.
-CMake 2.6 provides a BUNDLE option to the install(TARGETS) command
-that specifies rules specific to application bundles on the Mac.
-Projects should use this option when installing a target with the
-MACOSX_BUNDLE property set.
-
-The OLD behavior for this policy is to fall back to the RUNTIME
-DESTINATION if a BUNDLE DESTINATION is not given.  The NEW behavior
-for this policy is to produce an error if a bundle target is installed
-without a BUNDLE DESTINATION.
-
-This policy was introduced in CMake version 2.6.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0007.rst b/share/cmake-3.2/Help/policy/CMP0007.rst
deleted file mode 100644
index f0d8c16..0000000
--- a/share/cmake-3.2/Help/policy/CMP0007.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMP0007
--------
-
-list command no longer ignores empty elements.
-
-This policy determines whether the list command will ignore empty
-elements in the list.  CMake 2.4 and below list commands ignored all
-empty elements in the list.  For example, a;b;;c would have length 3
-and not 4.  The OLD behavior for this policy is to ignore empty list
-elements.  The NEW behavior for this policy is to correctly count
-empty elements in a list.
-
-This policy was introduced in CMake version 2.6.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0008.rst b/share/cmake-3.2/Help/policy/CMP0008.rst
deleted file mode 100644
index b118ece..0000000
--- a/share/cmake-3.2/Help/policy/CMP0008.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-CMP0008
--------
-
-Libraries linked by full-path must have a valid library file name.
-
-In CMake 2.4 and below it is possible to write code like
-
-::
-
-  target_link_libraries(myexe /full/path/to/somelib)
-
-where "somelib" is supposed to be a valid library file name such as
-"libsomelib.a" or "somelib.lib".  For Makefile generators this
-produces an error at build time because the dependency on the full
-path cannot be found.  For VS IDE and Xcode generators this used to
-work by accident because CMake would always split off the library
-directory and ask the linker to search for the library by name
-(-lsomelib or somelib.lib).  Despite the failure with Makefiles, some
-projects have code like this and build only with VS and/or Xcode.
-This version of CMake prefers to pass the full path directly to the
-native build tool, which will fail in this case because it does not
-name a valid library file.
-
-This policy determines what to do with full paths that do not appear
-to name a valid library file.  The OLD behavior for this policy is to
-split the library name from the path and ask the linker to search for
-it.  The NEW behavior for this policy is to trust the given path and
-pass it directly to the native build tool unchanged.
-
-This policy was introduced in CMake version 2.6.1.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0009.rst b/share/cmake-3.2/Help/policy/CMP0009.rst
deleted file mode 100644
index 481af1a..0000000
--- a/share/cmake-3.2/Help/policy/CMP0009.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMP0009
--------
-
-FILE GLOB_RECURSE calls should not follow symlinks by default.
-
-In CMake 2.6.1 and below, FILE GLOB_RECURSE calls would follow through
-symlinks, sometimes coming up with unexpectedly large result sets
-because of symlinks to top level directories that contain hundreds of
-thousands of files.
-
-This policy determines whether or not to follow symlinks encountered
-during a FILE GLOB_RECURSE call.  The OLD behavior for this policy is
-to follow the symlinks.  The NEW behavior for this policy is not to
-follow the symlinks by default, but only if FOLLOW_SYMLINKS is given
-as an additional argument to the FILE command.
-
-This policy was introduced in CMake version 2.6.2.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0010.rst b/share/cmake-3.2/Help/policy/CMP0010.rst
deleted file mode 100644
index 9d2eb76..0000000
--- a/share/cmake-3.2/Help/policy/CMP0010.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-CMP0010
--------
-
-Bad variable reference syntax is an error.
-
-In CMake 2.6.2 and below, incorrect variable reference syntax such as
-a missing close-brace ("${FOO") was reported but did not stop
-processing of CMake code.  This policy determines whether a bad
-variable reference is an error.  The OLD behavior for this policy is
-to warn about the error, leave the string untouched, and continue.
-The NEW behavior for this policy is to report an error.
-
-If :policy:`CMP0053` is set to ``NEW``, this policy has no effect
-and is treated as always being ``NEW``.
-
-This policy was introduced in CMake version 2.6.3.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0011.rst b/share/cmake-3.2/Help/policy/CMP0011.rst
deleted file mode 100644
index 0f41fff..0000000
--- a/share/cmake-3.2/Help/policy/CMP0011.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-CMP0011
--------
-
-Included scripts do automatic cmake_policy PUSH and POP.
-
-In CMake 2.6.2 and below, CMake Policy settings in scripts loaded by
-the include() and find_package() commands would affect the includer.
-Explicit invocations of cmake_policy(PUSH) and cmake_policy(POP) were
-required to isolate policy changes and protect the includer.  While
-some scripts intend to affect the policies of their includer, most do
-not.  In CMake 2.6.3 and above, include() and find_package() by
-default PUSH and POP an entry on the policy stack around an included
-script, but provide a NO_POLICY_SCOPE option to disable it.  This
-policy determines whether or not to imply NO_POLICY_SCOPE for
-compatibility.  The OLD behavior for this policy is to imply
-NO_POLICY_SCOPE for include() and find_package() commands.  The NEW
-behavior for this policy is to allow the commands to do their default
-cmake_policy PUSH and POP.
-
-This policy was introduced in CMake version 2.6.3.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0012.rst b/share/cmake-3.2/Help/policy/CMP0012.rst
deleted file mode 100644
index 7a749bf..0000000
--- a/share/cmake-3.2/Help/policy/CMP0012.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-CMP0012
--------
-
-if() recognizes numbers and boolean constants.
-
-In CMake versions 2.6.4 and lower the if() command implicitly
-dereferenced arguments corresponding to variables, even those named
-like numbers or boolean constants, except for 0 and 1.  Numbers and
-boolean constants such as true, false, yes, no, on, off, y, n,
-notfound, ignore (all case insensitive) were recognized in some cases
-but not all.  For example, the code "if(TRUE)" might have evaluated as
-false.  Numbers such as 2 were recognized only in boolean expressions
-like "if(NOT 2)" (leading to false) but not as a single-argument like
-"if(2)" (also leading to false).  Later versions of CMake prefer to
-treat numbers and boolean constants literally, so they should not be
-used as variable names.
-
-The OLD behavior for this policy is to implicitly dereference
-variables named like numbers and boolean constants.  The NEW behavior
-for this policy is to recognize numbers and boolean constants without
-dereferencing variables with such names.
-
-This policy was introduced in CMake version 2.8.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0013.rst b/share/cmake-3.2/Help/policy/CMP0013.rst
deleted file mode 100644
index e99997b..0000000
--- a/share/cmake-3.2/Help/policy/CMP0013.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMP0013
--------
-
-Duplicate binary directories are not allowed.
-
-CMake 2.6.3 and below silently permitted add_subdirectory() calls to
-create the same binary directory multiple times.  During build system
-generation files would be written and then overwritten in the build
-tree and could lead to strange behavior.  CMake 2.6.4 and above
-explicitly detect duplicate binary directories.  CMake 2.6.4 always
-considers this case an error.  In CMake 2.8.0 and above this policy
-determines whether or not the case is an error.  The OLD behavior for
-this policy is to allow duplicate binary directories.  The NEW
-behavior for this policy is to disallow duplicate binary directories
-with an error.
-
-This policy was introduced in CMake version 2.8.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0014.rst b/share/cmake-3.2/Help/policy/CMP0014.rst
deleted file mode 100644
index 37178d1..0000000
--- a/share/cmake-3.2/Help/policy/CMP0014.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMP0014
--------
-
-Input directories must have CMakeLists.txt.
-
-CMake versions before 2.8 silently ignored missing CMakeLists.txt
-files in directories referenced by add_subdirectory() or subdirs(),
-treating them as if present but empty.  In CMake 2.8.0 and above this
-policy determines whether or not the case is an error.  The OLD
-behavior for this policy is to silently ignore the problem.  The NEW
-behavior for this policy is to report an error.
-
-This policy was introduced in CMake version 2.8.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0015.rst b/share/cmake-3.2/Help/policy/CMP0015.rst
deleted file mode 100644
index 1b54979..0000000
--- a/share/cmake-3.2/Help/policy/CMP0015.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMP0015
--------
-
-link_directories() treats paths relative to the source dir.
-
-In CMake 2.8.0 and lower the link_directories() command passed
-relative paths unchanged to the linker.  In CMake 2.8.1 and above the
-link_directories() command prefers to interpret relative paths with
-respect to CMAKE_CURRENT_SOURCE_DIR, which is consistent with
-include_directories() and other commands.  The OLD behavior for this
-policy is to use relative paths verbatim in the linker command.  The
-NEW behavior for this policy is to convert relative paths to absolute
-paths by appending the relative path to CMAKE_CURRENT_SOURCE_DIR.
-
-This policy was introduced in CMake version 2.8.1.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0016.rst b/share/cmake-3.2/Help/policy/CMP0016.rst
deleted file mode 100644
index 743b1a9..0000000
--- a/share/cmake-3.2/Help/policy/CMP0016.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMP0016
--------
-
-target_link_libraries() reports error if its only argument is not a target.
-
-In CMake 2.8.2 and lower the target_link_libraries() command silently
-ignored if it was called with only one argument, and this argument
-wasn't a valid target.  In CMake 2.8.3 and above it reports an error
-in this case.
-
-This policy was introduced in CMake version 2.8.3.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0017.rst b/share/cmake-3.2/Help/policy/CMP0017.rst
deleted file mode 100644
index f74e6f0..0000000
--- a/share/cmake-3.2/Help/policy/CMP0017.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMP0017
--------
-
-Prefer files from the CMake module directory when including from there.
-
-Starting with CMake 2.8.4, if a cmake-module shipped with CMake (i.e.
-located in the CMake module directory) calls include() or
-find_package(), the files located in the CMake module directory are
-preferred over the files in CMAKE_MODULE_PATH.  This makes sure that
-the modules belonging to CMake always get those files included which
-they expect, and against which they were developed and tested.  In all
-other cases, the files found in CMAKE_MODULE_PATH still take
-precedence over the ones in the CMake module directory.  The OLD
-behavior is to always prefer files from CMAKE_MODULE_PATH over files
-from the CMake modules directory.
-
-This policy was introduced in CMake version 2.8.4.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0018.rst b/share/cmake-3.2/Help/policy/CMP0018.rst
deleted file mode 100644
index 0f68267..0000000
--- a/share/cmake-3.2/Help/policy/CMP0018.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-CMP0018
--------
-
-Ignore CMAKE_SHARED_LIBRARY_<Lang>_FLAGS variable.
-
-CMake 2.8.8 and lower compiled sources in SHARED and MODULE libraries
-using the value of the undocumented CMAKE_SHARED_LIBRARY_<Lang>_FLAGS
-platform variable.  The variable contained platform-specific flags
-needed to compile objects for shared libraries.  Typically it included
-a flag such as -fPIC for position independent code but also included
-other flags needed on certain platforms.  CMake 2.8.9 and higher
-prefer instead to use the POSITION_INDEPENDENT_CODE target property to
-determine what targets should be position independent, and new
-undocumented platform variables to select flags while ignoring
-CMAKE_SHARED_LIBRARY_<Lang>_FLAGS completely.
-
-The default for either approach produces identical compilation flags,
-but if a project modifies CMAKE_SHARED_LIBRARY_<Lang>_FLAGS from its
-original value this policy determines which approach to use.
-
-The OLD behavior for this policy is to ignore the
-POSITION_INDEPENDENT_CODE property for all targets and use the
-modified value of CMAKE_SHARED_LIBRARY_<Lang>_FLAGS for SHARED and
-MODULE libraries.
-
-The NEW behavior for this policy is to ignore
-CMAKE_SHARED_LIBRARY_<Lang>_FLAGS whether it is modified or not and
-honor the POSITION_INDEPENDENT_CODE target property.
-
-This policy was introduced in CMake version 2.8.9.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0019.rst b/share/cmake-3.2/Help/policy/CMP0019.rst
deleted file mode 100644
index 2b37fa1..0000000
--- a/share/cmake-3.2/Help/policy/CMP0019.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-CMP0019
--------
-
-Do not re-expand variables in include and link information.
-
-CMake 2.8.10 and lower re-evaluated values given to the
-include_directories, link_directories, and link_libraries commands to
-expand any leftover variable references at the end of the
-configuration step.  This was for strict compatibility with VERY early
-CMake versions because all variable references are now normally
-evaluated during CMake language processing.  CMake 2.8.11 and higher
-prefer to skip the extra evaluation.
-
-The OLD behavior for this policy is to re-evaluate the values for
-strict compatibility.  The NEW behavior for this policy is to leave
-the values untouched.
-
-This policy was introduced in CMake version 2.8.11.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0020.rst b/share/cmake-3.2/Help/policy/CMP0020.rst
deleted file mode 100644
index 6767d08..0000000
--- a/share/cmake-3.2/Help/policy/CMP0020.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-CMP0020
--------
-
-Automatically link Qt executables to qtmain target on Windows.
-
-CMake 2.8.10 and lower required users of Qt to always specify a link
-dependency to the qtmain.lib static library manually on Windows.
-CMake 2.8.11 gained the ability to evaluate generator expressions
-while determining the link dependencies from IMPORTED targets.  This
-allows CMake itself to automatically link executables which link to Qt
-to the qtmain.lib library when using IMPORTED Qt targets.  For
-applications already linking to qtmain.lib, this should have little
-impact.  For applications which supply their own alternative WinMain
-implementation and for applications which use the QAxServer library,
-this automatic linking will need to be disabled as per the
-documentation.
-
-The OLD behavior for this policy is not to link executables to
-qtmain.lib automatically when they link to the QtCore IMPORTED target.
-The NEW behavior for this policy is to link executables to qtmain.lib
-automatically when they link to QtCore IMPORTED target.
-
-This policy was introduced in CMake version 2.8.11.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0021.rst b/share/cmake-3.2/Help/policy/CMP0021.rst
deleted file mode 100644
index 3f5bd03..0000000
--- a/share/cmake-3.2/Help/policy/CMP0021.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-CMP0021
--------
-
-Fatal error on relative paths in INCLUDE_DIRECTORIES target property.
-
-CMake 2.8.10.2 and lower allowed the INCLUDE_DIRECTORIES target
-property to contain relative paths.  The base path for such relative
-entries is not well defined.  CMake 2.8.12 issues a FATAL_ERROR if the
-INCLUDE_DIRECTORIES property contains a relative path.
-
-The OLD behavior for this policy is not to warn about relative paths
-in the INCLUDE_DIRECTORIES target property.  The NEW behavior for this
-policy is to issue a FATAL_ERROR if INCLUDE_DIRECTORIES contains a
-relative path.
-
-This policy was introduced in CMake version 2.8.12.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0022.rst b/share/cmake-3.2/Help/policy/CMP0022.rst
deleted file mode 100644
index 22c7c4f..0000000
--- a/share/cmake-3.2/Help/policy/CMP0022.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-CMP0022
--------
-
-INTERFACE_LINK_LIBRARIES defines the link interface.
-
-CMake 2.8.11 constructed the 'link interface' of a target from
-properties matching ``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?``.
-The modern way to specify config-sensitive content is to use generator
-expressions and the ``IMPORTED_`` prefix makes uniform processing of the
-link interface with generator expressions impossible.  The
-INTERFACE_LINK_LIBRARIES target property was introduced as a
-replacement in CMake 2.8.12.  This new property is named consistently
-with the INTERFACE_COMPILE_DEFINITIONS, INTERFACE_INCLUDE_DIRECTORIES
-and INTERFACE_COMPILE_OPTIONS properties.  For in-build targets, CMake
-will use the INTERFACE_LINK_LIBRARIES property as the source of the
-link interface only if policy CMP0022 is NEW.  When exporting a target
-which has this policy set to NEW, only the INTERFACE_LINK_LIBRARIES
-property will be processed and generated for the IMPORTED target by
-default.  A new option to the install(EXPORT) and export commands
-allows export of the old-style properties for compatibility with
-downstream users of CMake versions older than 2.8.12.  The
-target_link_libraries command will no longer populate the properties
-matching LINK_INTERFACE_LIBRARIES(_<CONFIG>)? if this policy is NEW.
-
-Warning-free future-compatible code which works with CMake 2.8.7 onwards
-can be written by using the ``LINK_PRIVATE`` and ``LINK_PUBLIC`` keywords
-of :command:`target_link_libraries`.
-
-The OLD behavior for this policy is to ignore the
-INTERFACE_LINK_LIBRARIES property for in-build targets.  The NEW
-behavior for this policy is to use the INTERFACE_LINK_LIBRARIES
-property for in-build targets, and ignore the old properties matching
-``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?``.
-
-This policy was introduced in CMake version 2.8.12.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0023.rst b/share/cmake-3.2/Help/policy/CMP0023.rst
deleted file mode 100644
index 962b624..0000000
--- a/share/cmake-3.2/Help/policy/CMP0023.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-CMP0023
--------
-
-Plain and keyword target_link_libraries signatures cannot be mixed.
-
-CMake 2.8.12 introduced the target_link_libraries signature using the
-PUBLIC, PRIVATE, and INTERFACE keywords to generalize the LINK_PUBLIC
-and LINK_PRIVATE keywords introduced in CMake 2.8.7.  Use of
-signatures with any of these keywords sets the link interface of a
-target explicitly, even if empty.  This produces confusing behavior
-when used in combination with the historical behavior of the plain
-target_link_libraries signature.  For example, consider the code:
-
-::
-
- target_link_libraries(mylib A)
- target_link_libraries(mylib PRIVATE B)
-
-After the first line the link interface has not been set explicitly so
-CMake would use the link implementation, A, as the link interface.
-However, the second line sets the link interface to empty.  In order
-to avoid this subtle behavior CMake now prefers to disallow mixing the
-plain and keyword signatures of target_link_libraries for a single
-target.
-
-The OLD behavior for this policy is to allow keyword and plain
-target_link_libraries signatures to be mixed.  The NEW behavior for
-this policy is to not to allow mixing of the keyword and plain
-signatures.
-
-This policy was introduced in CMake version 2.8.12.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0024.rst b/share/cmake-3.2/Help/policy/CMP0024.rst
deleted file mode 100644
index ee53d5f..0000000
--- a/share/cmake-3.2/Help/policy/CMP0024.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-CMP0024
--------
-
-Disallow include export result.
-
-CMake 2.8.12 and lower allowed use of the include() command with the
-result of the export() command.  This relies on the assumption that
-the export() command has an immediate effect at configure-time during
-a cmake run.  Certain properties of targets are not fully determined
-until later at generate-time, such as the link language and complete
-list of link libraries.  Future refactoring will change the effect of
-the export() command to be executed at generate-time.  Use ALIAS
-targets instead in cases where the goal is to refer to targets by
-another name.
-
-The OLD behavior for this policy is to allow including the result of
-an export() command.  The NEW behavior for this policy is not to
-allow including the result of an export() command.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0025.rst b/share/cmake-3.2/Help/policy/CMP0025.rst
deleted file mode 100644
index 8d19edf..0000000
--- a/share/cmake-3.2/Help/policy/CMP0025.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-CMP0025
--------
-
-Compiler id for Apple Clang is now ``AppleClang``.
-
-CMake 3.0 and above recognize that Apple Clang is a different compiler
-than upstream Clang and that they have different version numbers.
-CMake now prefers to present this to projects by setting the
-:variable:`CMAKE_<LANG>_COMPILER_ID` variable to ``AppleClang`` instead
-of ``Clang``.  However, existing projects may assume the compiler id for
-Apple Clang is just ``Clang`` as it was in CMake versions prior to 3.0.
-Therefore this policy determines for Apple Clang which compiler id to
-report in the :variable:`CMAKE_<LANG>_COMPILER_ID` variable after
-language ``<LANG>`` is enabled by the :command:`project` or
-:command:`enable_language` command.  The policy must be set prior
-to the invocation of either command.
-
-The OLD behavior for this policy is to use compiler id ``Clang``.  The
-NEW behavior for this policy is to use compiler id ``AppleClang``.
-
-This policy was introduced in CMake version 3.0.  Use the
-:command:`cmake_policy` command to set this policy to OLD or NEW explicitly.
-Unlike most policies, CMake version |release| does *not* warn
-by default when this policy is not set and simply uses OLD behavior.
-See documentation of the
-:variable:`CMAKE_POLICY_WARNING_CMP0025 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
-variable to control the warning.
diff --git a/share/cmake-3.2/Help/policy/CMP0026.rst b/share/cmake-3.2/Help/policy/CMP0026.rst
deleted file mode 100644
index 177b655..0000000
--- a/share/cmake-3.2/Help/policy/CMP0026.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-CMP0026
--------
-
-Disallow use of the LOCATION target property.
-
-CMake 2.8.12 and lower allowed reading the LOCATION target
-property (and configuration-specific variants) to
-determine the eventual location of build targets.  This relies on the
-assumption that all necessary information is available at
-configure-time to determine the final location and filename of the
-target.  However, this property is not fully determined until later at
-generate-time.  At generate time, the $<TARGET_FILE> generator
-expression can be used to determine the eventual LOCATION of a target
-output.
-
-Code which reads the LOCATION target property can be ported to use the
-$<TARGET_FILE> generator expression together with the file(GENERATE)
-subcommand to generate a file containing the target location.
-
-The OLD behavior for this policy is to allow reading the LOCATION
-properties from build-targets.  The NEW behavior for this policy is to
-not to allow reading the LOCATION properties from build-targets.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0027.rst b/share/cmake-3.2/Help/policy/CMP0027.rst
deleted file mode 100644
index bedaffe..0000000
--- a/share/cmake-3.2/Help/policy/CMP0027.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-CMP0027
--------
-
-Conditionally linked imported targets with missing include directories.
-
-CMake 2.8.11 introduced introduced the concept of
-INTERFACE_INCLUDE_DIRECTORIES, and a check at cmake time that the
-entries in the INTERFACE_INCLUDE_DIRECTORIES of an IMPORTED target
-actually exist.  CMake 2.8.11 also introduced generator expression
-support in the target_link_libraries command.  However, if an imported
-target is linked as a result of a generator expression evaluation, the
-entries in the INTERFACE_INCLUDE_DIRECTORIES of that target were not
-checked for existence as they should be.
-
-The OLD behavior of this policy is to report a warning if an entry in
-the INTERFACE_INCLUDE_DIRECTORIES of a generator-expression
-conditionally linked IMPORTED target does not exist.
-
-The NEW behavior of this policy is to report an error if an entry in
-the INTERFACE_INCLUDE_DIRECTORIES of a generator-expression
-conditionally linked IMPORTED target does not exist.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0028.rst b/share/cmake-3.2/Help/policy/CMP0028.rst
deleted file mode 100644
index 24889ec..0000000
--- a/share/cmake-3.2/Help/policy/CMP0028.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-CMP0028
--------
-
-Double colon in target name means ALIAS or IMPORTED target.
-
-CMake 2.8.12 and lower allowed the use of targets and files with double
-colons in target_link_libraries, with some buildsystem generators.
-
-The use of double-colons is a common pattern used to namespace IMPORTED
-targets and ALIAS targets.  When computing the link dependencies of a target,
-the name of each dependency could either be a target, or a file on disk.
-Previously, if a target was not found with a matching name, the name was
-considered to refer to a file on disk.  This can lead to confusing error
-messages if there is a typo in what should be a target name.
-
-The OLD behavior for this policy is to search for targets, then files on disk,
-even if the search term contains double-colons.  The NEW behavior for this
-policy is to issue a FATAL_ERROR if a link dependency contains
-double-colons but is not an IMPORTED target or an ALIAS target.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0029.rst b/share/cmake-3.2/Help/policy/CMP0029.rst
deleted file mode 100644
index 8f58a12..0000000
--- a/share/cmake-3.2/Help/policy/CMP0029.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMP0029
--------
-
-The :command:`subdir_depends` command should not be called.
-
-The implementation of this command has been empty since December 2001
-but was kept in CMake for compatibility for a long time.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0030.rst b/share/cmake-3.2/Help/policy/CMP0030.rst
deleted file mode 100644
index 9e31b38..0000000
--- a/share/cmake-3.2/Help/policy/CMP0030.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMP0030
--------
-
-The :command:`use_mangled_mesa` command should not be called.
-
-This command was created in September 2001 to support VTK before
-modern CMake language and custom command capabilities.  VTK has
-not used it in years.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0031.rst b/share/cmake-3.2/Help/policy/CMP0031.rst
deleted file mode 100644
index 6b89558..0000000
--- a/share/cmake-3.2/Help/policy/CMP0031.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMP0031
--------
-
-The :command:`load_command` command should not be called.
-
-This command was added in August 2002 to allow projects to add
-arbitrary commands implemented in C or C++.  However, it does
-not work when the toolchain in use does not match the ABI of
-the CMake process.  It has been mostly superseded by the
-:command:`macro` and :command:`function` commands.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0032.rst b/share/cmake-3.2/Help/policy/CMP0032.rst
deleted file mode 100644
index f394a06..0000000
--- a/share/cmake-3.2/Help/policy/CMP0032.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMP0032
--------
-
-The :command:`output_required_files` command should not be called.
-
-This command was added in June 2001 to expose the then-current CMake
-implicit dependency scanner.  CMake's real implicit dependency scanner
-has evolved since then but is not exposed through this command.  The
-scanning capabilities of this command are very limited and this
-functionality is better achieved through dedicated outside tools.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0033.rst b/share/cmake-3.2/Help/policy/CMP0033.rst
deleted file mode 100644
index b420065..0000000
--- a/share/cmake-3.2/Help/policy/CMP0033.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-CMP0033
--------
-
-The :command:`export_library_dependencies` command should not be called.
-
-This command was added in January 2003 to export ``<tgt>_LIB_DEPENDS``
-internal CMake cache entries to a file for installation with a project.
-This was used at the time to allow transitive link dependencies to
-work for applications outside of the original build tree of a project.
-The functionality has been superseded by the :command:`export` and
-:command:`install(EXPORT)` commands.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0034.rst b/share/cmake-3.2/Help/policy/CMP0034.rst
deleted file mode 100644
index 2133997..0000000
--- a/share/cmake-3.2/Help/policy/CMP0034.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMP0034
--------
-
-The :command:`utility_source` command should not be called.
-
-This command was introduced in March 2001 to help build executables used to
-generate other files.  This approach has long been replaced by
-:command:`add_executable` combined with :command:`add_custom_command`.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0035.rst b/share/cmake-3.2/Help/policy/CMP0035.rst
deleted file mode 100644
index 7335b22..0000000
--- a/share/cmake-3.2/Help/policy/CMP0035.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMP0035
--------
-
-The :command:`variable_requires` command should not be called.
-
-This command was introduced in November 2001 to perform some conditional
-logic.  It has long been replaced by the :command:`if` command.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0036.rst b/share/cmake-3.2/Help/policy/CMP0036.rst
deleted file mode 100644
index 817f156..0000000
--- a/share/cmake-3.2/Help/policy/CMP0036.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-CMP0036
--------
-
-The :command:`build_name` command should not be called.
-
-This command was added in May 2001 to compute a name for the current
-operating system and compiler combination.  The command has long been
-documented as discouraged and replaced by the :variable:`CMAKE_SYSTEM`
-and :variable:`CMAKE_<LANG>_COMPILER` variables.
-
-.. |disallowed_version| replace:: 3.0
-.. include:: DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/policy/CMP0037.rst b/share/cmake-3.2/Help/policy/CMP0037.rst
deleted file mode 100644
index 4d485bf..0000000
--- a/share/cmake-3.2/Help/policy/CMP0037.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-CMP0037
--------
-
-Target names should not be reserved and should match a validity pattern.
-
-CMake 2.8.12 and lower allowed creating targets using :command:`add_library`,
-:command:`add_executable` and :command:`add_custom_target` with unrestricted
-choice for the target name.  Newer cmake features such
-as :manual:`cmake-generator-expressions(7)` and some
-diagnostics expect target names to match a restricted pattern.
-
-Target names may contain upper and lower case letters, numbers, the underscore
-character (_), dot(.), plus(+) and minus(-).  As a special case, ALIAS
-targets and IMPORTED targets may contain two consequtive colons.
-
-Target names reserved by one or more CMake generators are not allowed.
-Among others these include "all", "help" and "test".
-
-The OLD behavior for this policy is to allow creating targets with
-reserved names or which do not match the validity pattern.
-The NEW behavior for this policy is to report an error
-if an add_* command is used with an invalid target name.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0038.rst b/share/cmake-3.2/Help/policy/CMP0038.rst
deleted file mode 100644
index df5af6a..0000000
--- a/share/cmake-3.2/Help/policy/CMP0038.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-CMP0038
--------
-
-Targets may not link directly to themselves.
-
-CMake 2.8.12 and lower allowed a build target to link to itself directly with
-a :command:`target_link_libraries` call. This is an indicator of a bug in
-user code.
-
-The OLD behavior for this policy is to ignore targets which list themselves
-in their own link implementation.  The NEW behavior for this policy is to
-report an error if a target attempts to link to itself.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0039.rst b/share/cmake-3.2/Help/policy/CMP0039.rst
deleted file mode 100644
index 58ccc41..0000000
--- a/share/cmake-3.2/Help/policy/CMP0039.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMP0039
--------
-
-Utility targets may not have link dependencies.
-
-CMake 2.8.12 and lower allowed using utility targets in the left hand side
-position of the :command:`target_link_libraries` command. This is an indicator
-of a bug in user code.
-
-The OLD behavior for this policy is to ignore attempts to set the link
-libraries of utility targets.  The NEW behavior for this policy is to
-report an error if an attempt is made to set the link libraries of a
-utility target.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0040.rst b/share/cmake-3.2/Help/policy/CMP0040.rst
deleted file mode 100644
index 77a3c81..0000000
--- a/share/cmake-3.2/Help/policy/CMP0040.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-CMP0040
--------
-
-The target in the TARGET signature of add_custom_command() must exist.
-
-CMake 2.8.12 and lower silently ignored a custom command created with
-the TARGET signature of :command:`add_custom_command`
-if the target is unknown.
-
-The OLD behavior for this policy is to ignore custom commands
-for unknown targets. The NEW behavior for this policy is to report an error
-if the target referenced in :command:`add_custom_command` is unknown.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0041.rst b/share/cmake-3.2/Help/policy/CMP0041.rst
deleted file mode 100644
index 5a47de0..0000000
--- a/share/cmake-3.2/Help/policy/CMP0041.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-CMP0041
--------
-
-Error on relative include with generator expression.
-
-Diagnostics in CMake 2.8.12 and lower silently ignored an entry in the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of a target if it contained a generator
-expression at any position.
-
-The path entries in that target property should not be relative. High-level
-API should ensure that by adding either a source directory or a install
-directory prefix, as appropriate.
-
-As an additional diagnostic, the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` generated
-on an :prop_tgt:`IMPORTED` target for the install location should not contain
-paths in the source directory or the build directory.
-
-The OLD behavior for this policy is to ignore relative path entries if they
-contain a generator expression. The NEW behavior for this policy is to report
-an error if a generator expression appears in another location and the path is
-relative.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0042.rst b/share/cmake-3.2/Help/policy/CMP0042.rst
deleted file mode 100644
index fce870c..0000000
--- a/share/cmake-3.2/Help/policy/CMP0042.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMP0042
--------
-
-:prop_tgt:`MACOSX_RPATH` is enabled by default.
-
-CMake 2.8.12 and newer has support for using ``@rpath`` in a target's install
-name.  This was enabled by setting the target property
-:prop_tgt:`MACOSX_RPATH`.  The ``@rpath`` in an install name is a more
-flexible and powerful mechanism than ``@executable_path`` or ``@loader_path``
-for locating shared libraries.
-
-CMake 3.0 and later prefer this property to be ON by default.  Projects
-wanting ``@rpath`` in a target's install name may remove any setting of
-the :prop_tgt:`INSTALL_NAME_DIR` and :variable:`CMAKE_INSTALL_NAME_DIR`
-variables.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0043.rst b/share/cmake-3.2/Help/policy/CMP0043.rst
deleted file mode 100644
index 629e502..0000000
--- a/share/cmake-3.2/Help/policy/CMP0043.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-CMP0043
--------
-
-Ignore COMPILE_DEFINITIONS_<Config> properties
-
-CMake 2.8.12 and lower allowed setting the
-:prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` target property and
-:prop_dir:`COMPILE_DEFINITIONS_<CONFIG>` directory property to apply
-configuration-specific compile definitions.
-
-Since CMake 2.8.10, the :prop_tgt:`COMPILE_DEFINITIONS` property has supported
-:manual:`generator expressions <cmake-generator-expressions(7)>` for setting
-configuration-dependent content.  The continued existence of the suffixed
-variables is redundant, and causes a maintenance burden.  Population of the
-:prop_tgt:`COMPILE_DEFINITIONS_DEBUG <COMPILE_DEFINITIONS_<CONFIG>>` property
-may be replaced with a population of :prop_tgt:`COMPILE_DEFINITIONS` directly
-or via :command:`target_compile_definitions`:
-
-.. code-block:: cmake
-
-  # Old Interfaces:
-  set_property(TARGET tgt APPEND PROPERTY
-    COMPILE_DEFINITIONS_DEBUG DEBUG_MODE
-  )
-  set_property(DIRECTORY APPEND PROPERTY
-    COMPILE_DEFINITIONS_DEBUG DIR_DEBUG_MODE
-  )
-
-  # New Interfaces:
-  set_property(TARGET tgt APPEND PROPERTY
-    COMPILE_DEFINITIONS $<$<CONFIG:Debug>:DEBUG_MODE>
-  )
-  target_compile_definitions(tgt PRIVATE $<$<CONFIG:Debug>:DEBUG_MODE>)
-  set_property(DIRECTORY APPEND PROPERTY
-    COMPILE_DEFINITIONS $<$<CONFIG:Debug>:DIR_DEBUG_MODE>
-  )
-
-The OLD behavior for this policy is to consume the content of the suffixed
-:prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` target property when generating the
-compilation command. The NEW behavior for this policy is to ignore the content
-of the :prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` target property .
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0044.rst b/share/cmake-3.2/Help/policy/CMP0044.rst
deleted file mode 100644
index 4a3e215..0000000
--- a/share/cmake-3.2/Help/policy/CMP0044.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMP0044
--------
-
-Case sensitive ``<LANG>_COMPILER_ID`` generator expressions
-
-CMake 2.8.12 introduced the ``<LANG>_COMPILER_ID``
-:manual:`generator expressions <cmake-generator-expressions(7)>` to allow
-comparison of the :variable:`CMAKE_<LANG>_COMPILER_ID` with a test value.  The
-possible valid values are lowercase, but the comparison with the test value
-was performed case-insensitively.
-
-The OLD behavior for this policy is to perform a case-insensitive comparison
-with the value in the ``<LANG>_COMPILER_ID`` expression. The NEW behavior
-for this policy is to perform a case-sensitive comparison with the value in
-the ``<LANG>_COMPILER_ID`` expression.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0045.rst b/share/cmake-3.2/Help/policy/CMP0045.rst
deleted file mode 100644
index 58c422f..0000000
--- a/share/cmake-3.2/Help/policy/CMP0045.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMP0045
--------
-
-Error on non-existent target in get_target_property.
-
-In CMake 2.8.12 and lower, the :command:`get_target_property` command accepted
-a non-existent target argument without issuing any error or warning.  The
-result variable is set to a ``-NOTFOUND`` value.
-
-The OLD behavior for this policy is to issue no warning and set the result
-variable to a ``-NOTFOUND`` value.  The NEW behavior
-for this policy is to issue a ``FATAL_ERROR`` if the command is called with a
-non-existent target.
-
-This policy was introduced in CMake version 3.0.  CMake version
-|release| warns when the policy is not set and uses OLD behavior.  Use
-the cmake_policy command to set it to OLD or NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0046.rst b/share/cmake-3.2/Help/policy/CMP0046.rst
deleted file mode 100644
index 1a3bc65..0000000
--- a/share/cmake-3.2/Help/policy/CMP0046.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMP0046
--------
-
-Error on non-existent dependency in add_dependencies.
-
-CMake 2.8.12 and lower silently ignored non-existent dependencies
-listed in the :command:`add_dependencies` command.
-
-The OLD behavior for this policy is to silently ignore non-existent
-dependencies. The NEW behavior for this policy is to report an error
-if non-existent dependencies are listed in the :command:`add_dependencies`
-command.
-
-This policy was introduced in CMake version 3.0.
-CMake version |release| warns when the policy is not set and uses
-OLD behavior.  Use the cmake_policy command to set it to OLD or
-NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0047.rst b/share/cmake-3.2/Help/policy/CMP0047.rst
deleted file mode 100644
index 26ae439..0000000
--- a/share/cmake-3.2/Help/policy/CMP0047.rst
+++ /dev/null
@@ -1,28 +0,0 @@
-CMP0047
--------
-
-Use ``QCC`` compiler id for the qcc drivers on QNX.
-
-CMake 3.0 and above recognize that the QNX qcc compiler driver is
-different from the GNU compiler.
-CMake now prefers to present this to projects by setting the
-:variable:`CMAKE_<LANG>_COMPILER_ID` variable to ``QCC`` instead
-of ``GNU``.  However, existing projects may assume the compiler id for
-QNX qcc is just ``GNU`` as it was in CMake versions prior to 3.0.
-Therefore this policy determines for QNX qcc which compiler id to
-report in the :variable:`CMAKE_<LANG>_COMPILER_ID` variable after
-language ``<LANG>`` is enabled by the :command:`project` or
-:command:`enable_language` command.  The policy must be set prior
-to the invocation of either command.
-
-The OLD behavior for this policy is to use the ``GNU`` compiler id
-for the qcc and QCC compiler drivers. The NEW behavior for this policy
-is to use the ``QCC`` compiler id for those drivers.
-
-This policy was introduced in CMake version 3.0.  Use the
-:command:`cmake_policy` command to set this policy to OLD or NEW explicitly.
-Unlike most policies, CMake version |release| does *not* warn
-by default when this policy is not set and simply uses OLD behavior.
-See documentation of the
-:variable:`CMAKE_POLICY_WARNING_CMP0047 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
-variable to control the warning.
diff --git a/share/cmake-3.2/Help/policy/CMP0048.rst b/share/cmake-3.2/Help/policy/CMP0048.rst
deleted file mode 100644
index a54205e..0000000
--- a/share/cmake-3.2/Help/policy/CMP0048.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-CMP0048
--------
-
-The :command:`project` command manages VERSION variables.
-
-CMake version 3.0 introduced the ``VERSION`` option of the :command:`project`
-command to specify a project version as well as the name.  In order to keep
-:variable:`PROJECT_VERSION` and related variables consistent with variable
-:variable:`PROJECT_NAME` it is necessary to set the VERSION variables
-to the empty string when no ``VERSION`` is given to :command:`project`.
-However, this can change behavior for existing projects that set VERSION
-variables themselves since :command:`project` may now clear them.
-This policy controls the behavior for compatibility with such projects.
-
-The OLD behavior for this policy is to leave VERSION variables untouched.
-The NEW behavior for this policy is to set VERSION as documented by the
-:command:`project` command.
-
-This policy was introduced in CMake version 3.0.
-CMake version |release| warns when the policy is not set and uses
-OLD behavior.  Use the cmake_policy command to set it to OLD or
-NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0049.rst b/share/cmake-3.2/Help/policy/CMP0049.rst
deleted file mode 100644
index 5c8d4a8..0000000
--- a/share/cmake-3.2/Help/policy/CMP0049.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-CMP0049
--------
-
-Do not expand variables in target source entries.
-
-CMake 2.8.12 and lower performed and extra layer of variable expansion
-when evaluating source file names:
-
-.. code-block:: cmake
-
-  set(a_source foo.c)
-  add_executable(foo \${a_source})
-
-This was undocumented behavior.
-
-The OLD behavior for this policy is to expand such variables when processing
-the target sources.  The NEW behavior for this policy is to issue an error
-if such variables need to be expanded.
-
-This policy was introduced in CMake version 3.0.
-CMake version |release| warns when the policy is not set and uses
-OLD behavior.  Use the cmake_policy command to set it to OLD or
-NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0050.rst b/share/cmake-3.2/Help/policy/CMP0050.rst
deleted file mode 100644
index 76ae0aa..0000000
--- a/share/cmake-3.2/Help/policy/CMP0050.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-CMP0050
--------
-
-Disallow add_custom_command SOURCE signatures.
-
-CMake 2.8.12 and lower allowed a signature for :command:`add_custom_command`
-which specified an input to a command.  This was undocumented behavior.
-Modern use of CMake associates custom commands with their output, rather
-than their input.
-
-The OLD behavior for this policy is to allow the use of
-:command:`add_custom_command` SOURCE signatures.  The NEW behavior for this
-policy is to issue an error if such a signature is used.
-
-This policy was introduced in CMake version 3.0.
-CMake version |release| warns when the policy is not set and uses
-OLD behavior.  Use the cmake_policy command to set it to OLD or
-NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0051.rst b/share/cmake-3.2/Help/policy/CMP0051.rst
deleted file mode 100644
index 1b56cb0..0000000
--- a/share/cmake-3.2/Help/policy/CMP0051.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-CMP0051
--------
-
-List TARGET_OBJECTS in SOURCES target property.
-
-CMake 3.0 and lower did not include the ``TARGET_OBJECTS``
-:manual:`generator expression <cmake-generator-expressions(7)>` when
-returning the :prop_tgt:`SOURCES` target property.
-
-Configure-time CMake code is not able to handle generator expressions.  If
-using the :prop_tgt:`SOURCES` target property at configure time, it may be
-necessary to first remove generator expressions using the
-:command:`string(GENEX_STRIP)` command.  Generate-time CMake code such as
-:command:`file(GENERATE)` can handle the content without stripping.
-
-The ``OLD`` behavior for this policy is to omit ``TARGET_OBJECTS``
-expressions from the :prop_tgt:`SOURCES` target property.  The ``NEW``
-behavior for this policy is to include ``TARGET_OBJECTS`` expressions
-in the output.
-
-This policy was introduced in CMake version 3.1.
-CMake version |release| warns when the policy is not set and uses
-``OLD`` behavior.  Use the :command:`cmake_policy` command to set it
-to ``OLD`` or ``NEW`` explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0052.rst b/share/cmake-3.2/Help/policy/CMP0052.rst
deleted file mode 100644
index 48cfc9c..0000000
--- a/share/cmake-3.2/Help/policy/CMP0052.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-CMP0052
--------
-
-Reject source and build dirs in installed INTERFACE_INCLUDE_DIRECTORIES.
-
-CMake 3.0 and lower allowed subdirectories of the source directory or build
-directory to be in the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of
-installed and exported targets, if the directory was also a subdirectory of
-the installation prefix.  This makes the installation depend on the
-existence of the source dir or binary dir, and the installation will be
-broken if either are removed after installation.
-
-See :ref:`Include Directories and Usage Requirements` for more on
-specifying include directories for targets.
-
-The OLD behavior for this policy is to export the content of the
-:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` with the source or binary
-directory.  The NEW behavior for this
-policy is to issue an error if such a directory is used.
-
-This policy was introduced in CMake version 3.1.
-CMake version |release| warns when the policy is not set and uses
-``OLD`` behavior.  Use the :command:`cmake_policy` command to set it
-to ``OLD`` or ``NEW`` explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0053.rst b/share/cmake-3.2/Help/policy/CMP0053.rst
deleted file mode 100644
index bb0ff8b..0000000
--- a/share/cmake-3.2/Help/policy/CMP0053.rst
+++ /dev/null
@@ -1,44 +0,0 @@
-CMP0053
--------
-
-Simplify variable reference and escape sequence evaluation.
-
-CMake 3.1 introduced a much faster implementation of evaluation of the
-:ref:`Variable References` and :ref:`Escape Sequences` documented in the
-:manual:`cmake-language(7)` manual.  While the behavior is identical
-to the legacy implementation in most cases, some corner cases were
-cleaned up to simplify the behavior.  Specifically:
-
-* Expansion of ``@VAR@`` reference syntax defined by the
-  :command:`configure_file` and :command:`string(CONFIGURE)`
-  commands is no longer performed in other contexts.
-
-* Literal ``${VAR}`` reference syntax may contain only
-  alphanumeric characters (``A-Z``, ``a-z``, ``0-9``) and
-  the characters ``_``, ``.``, ``/``, ``-``, and ``+``.
-  Variables with other characters in their name may still
-  be referenced indirectly, e.g.
-
-  .. code-block:: cmake
-
-    set(varname "otherwise & disallowed $ characters")
-    message("${${varname}}")
-
-* The setting of policy :policy:`CMP0010` is not considered,
-  so improper variable reference syntax is always an error.
-
-* More characters are allowed to be escaped in variable names.
-  Previously, only ``()#" \@^`` were valid characters to
-  escape. Now any non-alphanumeric, non-semicolon, non-NUL
-  character may be escaped following the ``escape_identity``
-  production in the :ref:`Escape Sequences` section of the
-  :manual:`cmake-language(7)` manual.
-
-The ``OLD`` behavior for this policy is to honor the legacy behavior for
-variable references and escape sequences.  The ``NEW`` behavior is to
-use the simpler variable expansion and escape sequence evaluation rules.
-
-This policy was introduced in CMake version 3.1.
-CMake version |release| warns when the policy is not set and uses
-``OLD`` behavior.  Use the :command:`cmake_policy` command to set
-it to ``OLD`` or ``NEW`` explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0054.rst b/share/cmake-3.2/Help/policy/CMP0054.rst
deleted file mode 100644
index 39f0c40..0000000
--- a/share/cmake-3.2/Help/policy/CMP0054.rst
+++ /dev/null
@@ -1,46 +0,0 @@
-CMP0054
--------
-
-Only interpret :command:`if` arguments as variables or keywords when unquoted.
-
-CMake 3.1 and above no longer implicitly dereference variables or
-interpret keywords in an :command:`if` command argument when
-it is a :ref:`Quoted Argument` or a :ref:`Bracket Argument`.
-
-The ``OLD`` behavior for this policy is to dereference variables and
-interpret keywords even if they are quoted or bracketed.
-The ``NEW`` behavior is to not dereference variables or interpret keywords
-that have been quoted or bracketed.
-
-Given the following partial example:
-
-::
-
-  set(MONKEY 1)
-  set(ANIMAL MONKEY)
-
-  if("${ANIMAL}" STREQUAL "MONKEY")
-
-After explicit expansion of variables this gives:
-
-::
-
-  if("MONKEY" STREQUAL "MONKEY")
-
-With the policy set to ``OLD`` implicit expansion reduces this semantically to:
-
-::
-
-  if("1" STREQUAL "1")
-
-With the policy set to ``NEW`` the quoted arguments will not be
-further dereferenced:
-
-::
-
-  if("MONKEY" STREQUAL "MONKEY")
-
-This policy was introduced in CMake version 3.1.
-CMake version |release| warns when the policy is not set and uses
-``OLD`` behavior.  Use the :command:`cmake_policy` command to set
-it to ``OLD`` or ``NEW`` explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0055.rst b/share/cmake-3.2/Help/policy/CMP0055.rst
deleted file mode 100644
index fe7ab6f..0000000
--- a/share/cmake-3.2/Help/policy/CMP0055.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMP0055
--------
-
-Strict checking for the :command:`break` command.
-
-CMake 3.1 and lower allowed calls to the :command:`break` command
-outside of a loop context and also ignored any given arguments.
-This was undefined behavior.
-
-The OLD behavior for this policy is to allow :command:`break` to be placed
-outside of loop contexts and ignores any arguments.  The NEW behavior for this
-policy is to issue an error if a misplaced break or any arguments are found.
-
-This policy was introduced in CMake version 3.2.
-CMake version |release| warns when the policy is not set and uses
-OLD behavior.  Use the cmake_policy command to set it to OLD or
-NEW explicitly.
diff --git a/share/cmake-3.2/Help/policy/CMP0056.rst b/share/cmake-3.2/Help/policy/CMP0056.rst
deleted file mode 100644
index 3c75ff4..0000000
--- a/share/cmake-3.2/Help/policy/CMP0056.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-CMP0056
--------
-
-Honor link flags in :command:`try_compile` source-file signature.
-
-The :command:`try_compile` command source-file signature generates a
-``CMakeLists.txt`` file to build the source file into an executable.
-In order to compile the source the same way as it might be compiled
-by the calling project, the generated project sets the value of the
-:variable:`CMAKE_<LANG>_FLAGS` variable to that in the calling project.
-The value of the :variable:`CMAKE_EXE_LINKER_FLAGS` variable may be
-needed in some cases too, but CMake 3.1 and lower did not set it in
-the generated project.  CMake 3.2 and above prefer to set it so that
-linker flags are honored as well as compiler flags.  This policy
-provides compatibility with the pre-3.2 behavior.
-
-The OLD behavior for this policy is to not set the value of the
-:variable:`CMAKE_EXE_LINKER_FLAGS` variable in the generated test
-project.  The NEW behavior for this policy is to set the value of
-the :variable:`CMAKE_EXE_LINKER_FLAGS` variable in the test project
-to the same as it is in the calling project.
-
-If the project code does not set the policy explicitly, users may
-set it on the command line by defining the
-:variable:`CMAKE_POLICY_DEFAULT_CMP0056 <CMAKE_POLICY_DEFAULT_CMP<NNNN>>`
-variable in the cache.
-
-This policy was introduced in CMake version 3.2.  Unlike most policies,
-CMake version |release| does *not* warn by default when this policy
-is not set and simply uses OLD behavior.  See documentation of the
-:variable:`CMAKE_POLICY_WARNING_CMP0056 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
-variable to control the warning.
diff --git a/share/cmake-3.2/Help/prop_dir/CLEAN_NO_CUSTOM.rst b/share/cmake-3.2/Help/prop_dir/CLEAN_NO_CUSTOM.rst
deleted file mode 100644
index 9a4173e..0000000
--- a/share/cmake-3.2/Help/prop_dir/CLEAN_NO_CUSTOM.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CLEAN_NO_CUSTOM
----------------
-
-Should the output of custom commands be left.
-
-If this is true then the outputs of custom commands for this directory
-will not be removed during the "make clean" stage.
diff --git a/share/cmake-3.2/Help/prop_dir/COMPILE_DEFINITIONS.rst b/share/cmake-3.2/Help/prop_dir/COMPILE_DEFINITIONS.rst
deleted file mode 100644
index ab7e7f0..0000000
--- a/share/cmake-3.2/Help/prop_dir/COMPILE_DEFINITIONS.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-COMPILE_DEFINITIONS
--------------------
-
-Preprocessor definitions for compiling a directory's sources.
-
-This property specifies the list of options given so far to the
-:command:`add_definitions` command.
-
-The ``COMPILE_DEFINITIONS`` property may be set to a semicolon-separated
-list of preprocessor definitions using the syntax ``VAR`` or ``VAR=value``.
-Function-style definitions are not supported.  CMake will
-automatically escape the value correctly for the native build system
-(note that CMake language syntax may require escapes to specify some
-values).
-
-This property will be initialized in each directory by its value in the
-directory's parent.
-
-CMake will automatically drop some definitions that are not supported
-by the native build tool.  The VS6 IDE does not support definition
-values with spaces (but NMake does).
-
-.. include:: /include/COMPILE_DEFINITIONS_DISCLAIMER.txt
-
-Contents of ``COMPILE_DEFINITIONS`` may use "generator expressions" with
-the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
-
-The corresponding :prop_dir:`COMPILE_DEFINITIONS_<CONFIG>` property may
-be set to specify per-configuration definitions.  Generator expressions
-should be preferred instead of setting the alternative property.
diff --git a/share/cmake-3.2/Help/prop_dir/COMPILE_OPTIONS.rst b/share/cmake-3.2/Help/prop_dir/COMPILE_OPTIONS.rst
deleted file mode 100644
index 5530860..0000000
--- a/share/cmake-3.2/Help/prop_dir/COMPILE_OPTIONS.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-COMPILE_OPTIONS
----------------
-
-List of options to pass to the compiler.
-
-This property specifies the list of options given so far to the
-:command:`add_compile_options` command.
-
-This property is used to initialize the :prop_tgt:`COMPILE_OPTIONS` target
-property when a target is created, which is used by the generators to set
-the options for the compiler.
-
-Contents of ``COMPILE_OPTIONS`` may use "generator expressions" with the
-syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual
-for available expressions.  See the :manual:`cmake-buildsystem(7)` manual
-for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/prop_dir/DEFINITIONS.rst b/share/cmake-3.2/Help/prop_dir/DEFINITIONS.rst
deleted file mode 100644
index 22f7c15..0000000
--- a/share/cmake-3.2/Help/prop_dir/DEFINITIONS.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-DEFINITIONS
------------
-
-For CMake 2.4 compatibility only.  Use COMPILE_DEFINITIONS instead.
-
-This read-only property specifies the list of flags given so far to
-the add_definitions command.  It is intended for debugging purposes.
-Use the COMPILE_DEFINITIONS instead.
diff --git a/share/cmake-3.2/Help/prop_dir/INCLUDE_DIRECTORIES.rst b/share/cmake-3.2/Help/prop_dir/INCLUDE_DIRECTORIES.rst
deleted file mode 100644
index baba49b..0000000
--- a/share/cmake-3.2/Help/prop_dir/INCLUDE_DIRECTORIES.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-INCLUDE_DIRECTORIES
--------------------
-
-List of preprocessor include file search directories.
-
-This property specifies the list of directories given so far to the
-:command:`include_directories` command.
-
-This property is used to populate the :prop_tgt:`INCLUDE_DIRECTORIES`
-target property, which is used by the generators to set the include
-directories for the compiler.
-
-In addition to accepting values from that command, values may be set
-directly on any directory using the :command:`set_property` command.  A
-directory gets its initial value from its parent directory if it has one.
-The intial value of the :prop_tgt:`INCLUDE_DIRECTORIES` target property
-comes from the value of this property.  Both directory and target property
-values are adjusted by calls to the :command:`include_directories` command.
-
-The target property values are used by the generators to set the
-include paths for the compiler.
-
-Contents of ``INCLUDE_DIRECTORIES`` may use "generator expressions" with
-the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/prop_dir/INCLUDE_REGULAR_EXPRESSION.rst b/share/cmake-3.2/Help/prop_dir/INCLUDE_REGULAR_EXPRESSION.rst
deleted file mode 100644
index befafa5..0000000
--- a/share/cmake-3.2/Help/prop_dir/INCLUDE_REGULAR_EXPRESSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-INCLUDE_REGULAR_EXPRESSION
---------------------------
-
-Include file scanning regular expression.
-
-This read-only property specifies the regular expression used during
-dependency scanning to match include files that should be followed.
-See the include_regular_expression command.
diff --git a/share/cmake-3.2/Help/prop_dir/LISTFILE_STACK.rst b/share/cmake-3.2/Help/prop_dir/LISTFILE_STACK.rst
deleted file mode 100644
index f729c1e..0000000
--- a/share/cmake-3.2/Help/prop_dir/LISTFILE_STACK.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-LISTFILE_STACK
---------------
-
-The current stack of listfiles being processed.
-
-This property is mainly useful when trying to debug errors in your
-CMake scripts.  It returns a list of what list files are currently
-being processed, in order.  So if one listfile does an INCLUDE command
-then that is effectively pushing the included listfile onto the stack.
diff --git a/share/cmake-3.2/Help/prop_gbl/CMAKE_CXX_KNOWN_FEATURES.rst b/share/cmake-3.2/Help/prop_gbl/CMAKE_CXX_KNOWN_FEATURES.rst
deleted file mode 100644
index 163ae34..0000000
--- a/share/cmake-3.2/Help/prop_gbl/CMAKE_CXX_KNOWN_FEATURES.rst
+++ /dev/null
@@ -1,303 +0,0 @@
-CMAKE_CXX_KNOWN_FEATURES
-------------------------
-
-List of C++ features known to this version of CMake.
-
-The features listed in this global property may be known to be available to the
-C++ compiler.  If the feature is available with the C++ compiler, it will
-be listed in the :variable:`CMAKE_CXX_COMPILE_FEATURES` variable.
-
-The features listed here may be used with the :command:`target_compile_features`
-command.  See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-
-The features known to this version of CMake are:
-
-``cxx_aggregate_default_initializers``
-  Aggregate default initializers, as defined in N3605_.
-
-  .. _N3605: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3605.html
-
-``cxx_alias_templates``
-  Template aliases, as defined in N2258_.
-
-  .. _N2258: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2258.pdf
-
-``cxx_alignas``
-  Alignment control ``alignas``, as defined in N2341_.
-
-  .. _N2341: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2341.pdf
-
-``cxx_alignof``
-  Alignment control ``alignof``, as defined in N2341_.
-
-  .. _N2341: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2341.pdf
-
-``cxx_attributes``
-  Generic attributes, as defined in N2761_.
-
-  .. _N2761: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2761.pdf
-
-``cxx_attribute_deprecated``
-  ``[[deprecated]]`` attribute, as defined in N3760_.
-
-  .. _N3760: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3760.html
-
-``cxx_auto_type``
-  Automatic type deduction, as defined in N1984_.
-
-  .. _N1984: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n1984.pdf
-
-``cxx_binary_literals``
-  Binary literals, as defined in N3472_.
-
-  .. _N3472: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3472.pdf
-
-``cxx_constexpr``
-  Constant expressions, as defined in N2235_.
-
-  .. _N2235: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2235.pdf
-
-``cxx_contextual_conversions``
-  Contextual conversions, as defined in N3323_.
-
-  .. _N3323: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3323.pdf
-
-``cxx_decltype_incomplete_return_types``
-  Decltype on incomplete return types, as defined in N3276_.
-
-  .. _N3276 : http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3276.pdf
-
-``cxx_decltype``
-  Decltype, as defined in N2343_.
-
-  .. _N2343: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2343.pdf
-
-``cxx_decltype_auto``
-  ``decltype(auto)`` semantics, as defined in N3638_.
-
-  .. _N3638: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3638.html
-
-``cxx_default_function_template_args``
-  Default template arguments for function templates, as defined in DR226_
-
-  .. _DR226: http://www.open-std.org/jtc1/sc22/wg21/docs/cwg_defects.html#226
-
-``cxx_defaulted_functions``
-  Defaulted functions, as defined in N2346_.
-
-  .. _N2346: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2346.htm
-
-``cxx_defaulted_move_initializers``
-  Defaulted move initializers, as defined in N3053_.
-
-  .. _N3053: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3053.html
-
-``cxx_delegating_constructors``
-  Delegating constructors, as defined in N1986_.
-
-  .. _N1986: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n1986.pdf
-
-``cxx_deleted_functions``
-  Deleted functions, as defined in N2346_.
-
-  .. _N2346: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2346.htm
-
-``cxx_digit_separators``
-  Digit separators, as defined in N3781_.
-
-  .. _N3781: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3781.pdf
-
-``cxx_enum_forward_declarations``
-  Enum forward declarations, as defined in N2764_.
-
-  .. _N2764: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2764.pdf
-
-``cxx_explicit_conversions``
-  Explicit conversion operators, as defined in N2437_.
-
-  .. _N2437: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2437.pdf
-
-``cxx_extended_friend_declarations``
-  Extended friend declarations, as defined in N1791_.
-
-  .. _N1791: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2005/n1791.pdf
-
-``cxx_extern_templates``
-  Extern templates, as defined in N1987_.
-
-  .. _N1987: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n1987.htm
-
-``cxx_final``
-  Override control ``final`` keyword, as defined in N2928_, N3206_ and N3272_.
-
-  .. _N2928: http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2928.htm
-  .. _N3206: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3206.htm
-  .. _N3272: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3272.htm
-
-``cxx_func_identifier``
-  Predefined ``__func__`` identifier, as defined in N2340_.
-
-  .. _N2340: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2340.htm
-
-``cxx_generalized_initializers``
-  Initializer lists, as defined in N2672_.
-
-  .. _N2672: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2672.htm
-
-``cxx_generic_lambdas``
-  Generic lambdas, as defined in N3649_.
-
-  .. _N3649: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3649.html
-
-``cxx_inheriting_constructors``
-  Inheriting constructors, as defined in N2540_.
-
-  .. _N2540: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2540.htm
-
-``cxx_inline_namespaces``
-  Inline namespaces, as defined in N2535_.
-
-  .. _N2535: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2535.htm
-
-``cxx_lambdas``
-  Lambda functions, as defined in N2927_.
-
-  .. _N2927: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2927.pdf
-
-``cxx_lambda_init_captures``
-  Initialized lambda captures, as defined in N3648_.
-
-  .. _N3648: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3648.html
-
-``cxx_local_type_template_args``
-  Local and unnamed types as template arguments, as defined in N2657_.
-
-  .. _N2657: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2657.htm
-
-``cxx_long_long_type``
-  ``long long`` type, as defined in N1811_.
-
-  .. _N1811: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2005/n1811.pdf
-
-``cxx_noexcept``
-  Exception specifications, as defined in N3050_.
-
-  .. _N3050: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3050.html
-
-``cxx_nonstatic_member_init``
-  Non-static data member initialization, as defined in N2756_.
-
-  .. _N2756: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2756.htm
-
-``cxx_nullptr``
-  Null pointer, as defined in N2431_.
-
-  .. _N2431: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
-
-``cxx_override``
-  Override control ``override`` keyword, as defined in N2928_, N3206_
-  and N3272_.
-
-  .. _N2928: http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2928.htm
-  .. _N3206: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3206.htm
-  .. _N3272: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3272.htm
-
-``cxx_range_for``
-  Range-based for, as defined in N2930_.
-
-  .. _N2930: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2930.html
-
-``cxx_raw_string_literals``
-  Raw string literals, as defined in N2442_.
-
-  .. _N2442: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2442.htm
-
-``cxx_reference_qualified_functions``
-  Reference qualified functions, as defined in N2439_.
-
-  .. _N2439: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2439.htm
-
-``cxx_relaxed_constexpr``
-  Relaxed constexpr, as defined in N3652_.
-
-  .. _N3652: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3652.html
-
-``cxx_return_type_deduction``
-  Return type deduction on normal functions, as defined in N3386_.
-
-  .. _N3386: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3386.html
-
-``cxx_right_angle_brackets``
-  Right angle bracket parsing, as defined in N1757_.
-
-  .. _N1757: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2005/n1757.html
-
-``cxx_rvalue_references``
-  R-value references, as defined in N2118_.
-
-  .. _N2118: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n2118.html
-
-``cxx_sizeof_member``
-  Size of non-static data members, as defined in N2253_.
-
-  .. _N2253: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2253.html
-
-``cxx_static_assert``
-  Static assert, as defined in N1720_.
-
-  .. _N1720: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2004/n1720.html
-
-``cxx_strong_enums``
-  Strongly typed enums, as defined in N2347_.
-
-  .. _N2347: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2347.pdf
-
-``cxx_thread_local``
-  Thread-local variables, as defined in N2659_.
-
-  .. _N2659: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2659.htm
-
-``cxx_trailing_return_types``
-  Automatic function return type, as defined in N2541_.
-
-  .. _N2541: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2541.htm
-
-``cxx_unicode_literals``
-  Unicode string literals, as defined in N2442_.
-
-  .. _N2442: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2442.htm
-
-``cxx_uniform_initialization``
-  Uniform intialization, as defined in N2640_.
-
-  .. _N2640: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2640.pdf
-
-``cxx_unrestricted_unions``
-  Unrestricted unions, as defined in N2544_.
-
-  .. _N2544: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2544.pdf
-
-``cxx_user_literals``
-  User-defined literals, as defined in N2765_.
-
-  .. _N2765: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2765.pdf
-
-``cxx_variable_templates``
-  Variable templates, as defined in N3651_.
-
-  .. _N3651: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3651.pdf
-
-``cxx_variadic_macros``
-  Variadic macros, as defined in N1653_.
-
-  .. _N1653: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2004/n1653.htm
-
-``cxx_variadic_templates``
-  Variadic templates, as defined in N2242_.
-
-  .. _N2242: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2242.pdf
-
-``cxx_template_template_parameters``
-  Template template parameters, as defined in ``ISO/IEC 14882:1998``.
diff --git a/share/cmake-3.2/Help/prop_gbl/CMAKE_C_KNOWN_FEATURES.rst b/share/cmake-3.2/Help/prop_gbl/CMAKE_C_KNOWN_FEATURES.rst
deleted file mode 100644
index 18cd030..0000000
--- a/share/cmake-3.2/Help/prop_gbl/CMAKE_C_KNOWN_FEATURES.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-CMAKE_C_KNOWN_FEATURES
-----------------------
-
-List of C features known to this version of CMake.
-
-The features listed in this global property may be known to be available to the
-C compiler.  If the feature is available with the C compiler, it will
-be listed in the :variable:`CMAKE_C_COMPILE_FEATURES` variable.
-
-The features listed here may be used with the :command:`target_compile_features`
-command.  See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-The features known to this version of CMake are:
-
-``c_function_prototypes``
-  Function prototypes, as defined in ``ISO/IEC 9899:1990``.
-
-``c_restrict``
-  ``restrict`` keyword, as defined in ``ISO/IEC 9899:1999``.
-
-``c_static_assert``
-  Static assert, as defined in ``ISO/IEC 9899:2011``.
-
-``c_variadic_macros``
-  Variadic macros, as defined in ``ISO/IEC 9899:1999``.
diff --git a/share/cmake-3.2/Help/prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS.rst b/share/cmake-3.2/Help/prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS.rst
deleted file mode 100644
index 185246c..0000000
--- a/share/cmake-3.2/Help/prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-FIND_LIBRARY_USE_LIB64_PATHS
-----------------------------
-
-Whether FIND_LIBRARY should automatically search lib64 directories.
-
-FIND_LIBRARY_USE_LIB64_PATHS is a boolean specifying whether the
-FIND_LIBRARY command should automatically search the lib64 variant of
-directories called lib in the search path when building 64-bit
-binaries.
diff --git a/share/cmake-3.2/Help/prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING.rst b/share/cmake-3.2/Help/prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING.rst
deleted file mode 100644
index 9a3edd8..0000000
--- a/share/cmake-3.2/Help/prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-FIND_LIBRARY_USE_OPENBSD_VERSIONING
------------------------------------
-
-Whether FIND_LIBRARY should find OpenBSD-style shared libraries.
-
-This property is a boolean specifying whether the FIND_LIBRARY command
-should find shared libraries with OpenBSD-style versioned extension:
-".so.<major>.<minor>".  The property is set to true on OpenBSD and
-false on other platforms.
diff --git a/share/cmake-3.2/Help/prop_gbl/IN_TRY_COMPILE.rst b/share/cmake-3.2/Help/prop_gbl/IN_TRY_COMPILE.rst
deleted file mode 100644
index 3a2ef5b..0000000
--- a/share/cmake-3.2/Help/prop_gbl/IN_TRY_COMPILE.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-IN_TRY_COMPILE
---------------
-
-Read-only property that is true during a try-compile configuration.
-
-True when building a project inside a TRY_COMPILE or TRY_RUN command.
diff --git a/share/cmake-3.2/Help/prop_gbl/PREDEFINED_TARGETS_FOLDER.rst b/share/cmake-3.2/Help/prop_gbl/PREDEFINED_TARGETS_FOLDER.rst
deleted file mode 100644
index e85b823..0000000
--- a/share/cmake-3.2/Help/prop_gbl/PREDEFINED_TARGETS_FOLDER.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-PREDEFINED_TARGETS_FOLDER
--------------------------
-
-Name of FOLDER for targets that are added automatically by CMake.
-
-If not set, CMake uses "CMakePredefinedTargets" as a default value for
-this property.  Targets such as INSTALL, PACKAGE and RUN_TESTS will be
-organized into this FOLDER.  See also the documentation for the FOLDER
-target property.
diff --git a/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_COMPILE.rst b/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_COMPILE.rst
deleted file mode 100644
index 980843b..0000000
--- a/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_COMPILE.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-RULE_LAUNCH_COMPILE
--------------------
-
-Specify a launcher for compile rules.
-
-Makefile generators prefix compiler commands with the given launcher
-command line.  This is intended to allow launchers to intercept build
-problems with high granularity.  Non-Makefile generators currently
-ignore this property.
diff --git a/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_CUSTOM.rst b/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_CUSTOM.rst
deleted file mode 100644
index 9d4a25c..0000000
--- a/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_CUSTOM.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-RULE_LAUNCH_CUSTOM
-------------------
-
-Specify a launcher for custom rules.
-
-Makefile generators prefix custom commands with the given launcher
-command line.  This is intended to allow launchers to intercept build
-problems with high granularity.  Non-Makefile generators currently
-ignore this property.
diff --git a/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_LINK.rst b/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_LINK.rst
deleted file mode 100644
index 191f1d5..0000000
--- a/share/cmake-3.2/Help/prop_gbl/RULE_LAUNCH_LINK.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-RULE_LAUNCH_LINK
-----------------
-
-Specify a launcher for link rules.
-
-Makefile generators prefix link and archive commands with the given
-launcher command line.  This is intended to allow launchers to
-intercept build problems with high granularity.  Non-Makefile
-generators currently ignore this property.
diff --git a/share/cmake-3.2/Help/prop_gbl/RULE_MESSAGES.rst b/share/cmake-3.2/Help/prop_gbl/RULE_MESSAGES.rst
deleted file mode 100644
index 38d83a3..0000000
--- a/share/cmake-3.2/Help/prop_gbl/RULE_MESSAGES.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-RULE_MESSAGES
--------------
-
-Specify whether to report a message for each make rule.
-
-This property specifies whether Makefile generators should add a
-progress message describing what each build rule does.  If the
-property is not set the default is ON.  Set the property to OFF to
-disable granular messages and report only as each target completes.
-This is intended to allow scripted builds to avoid the build time cost
-of detailed reports.  If a CMAKE_RULE_MESSAGES cache entry exists its
-value initializes the value of this property.  Non-Makefile generators
-currently ignore this property.
diff --git a/share/cmake-3.2/Help/prop_gbl/USE_FOLDERS.rst b/share/cmake-3.2/Help/prop_gbl/USE_FOLDERS.rst
deleted file mode 100644
index fdbca9f..0000000
--- a/share/cmake-3.2/Help/prop_gbl/USE_FOLDERS.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-USE_FOLDERS
------------
-
-Use the FOLDER target property to organize targets into folders.
-
-If not set, CMake treats this property as OFF by default.  CMake
-generators that are capable of organizing into a hierarchy of folders
-use the values of the FOLDER target property to name those folders.
-See also the documentation for the FOLDER target property.
diff --git a/share/cmake-3.2/Help/prop_sf/COMPILE_DEFINITIONS.rst b/share/cmake-3.2/Help/prop_sf/COMPILE_DEFINITIONS.rst
deleted file mode 100644
index 7f7e7c7..0000000
--- a/share/cmake-3.2/Help/prop_sf/COMPILE_DEFINITIONS.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-COMPILE_DEFINITIONS
--------------------
-
-Preprocessor definitions for compiling a source file.
-
-The COMPILE_DEFINITIONS property may be set to a semicolon-separated
-list of preprocessor definitions using the syntax VAR or VAR=value.
-Function-style definitions are not supported.  CMake will
-automatically escape the value correctly for the native build system
-(note that CMake language syntax may require escapes to specify some
-values).  This property may be set on a per-configuration basis using
-the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
-name (ex.  "COMPILE_DEFINITIONS_DEBUG").
-
-CMake will automatically drop some definitions that are not supported
-by the native build tool.  The VS6 IDE does not support definition
-values with spaces (but NMake does).  Xcode does not support
-per-configuration definitions on source files.
-
-.. include:: /include/COMPILE_DEFINITIONS_DISCLAIMER.txt
diff --git a/share/cmake-3.2/Help/prop_sf/COMPILE_FLAGS.rst b/share/cmake-3.2/Help/prop_sf/COMPILE_FLAGS.rst
deleted file mode 100644
index daba502..0000000
--- a/share/cmake-3.2/Help/prop_sf/COMPILE_FLAGS.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-COMPILE_FLAGS
--------------
-
-Additional flags to be added when compiling this source file.
-
-These flags will be added to the list of compile flags when this
-source file builds.  Use COMPILE_DEFINITIONS to pass additional
-preprocessor definitions.
diff --git a/share/cmake-3.2/Help/prop_sf/MACOSX_PACKAGE_LOCATION.rst b/share/cmake-3.2/Help/prop_sf/MACOSX_PACKAGE_LOCATION.rst
deleted file mode 100644
index 27f2929..0000000
--- a/share/cmake-3.2/Help/prop_sf/MACOSX_PACKAGE_LOCATION.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-MACOSX_PACKAGE_LOCATION
------------------------
-
-Place a source file inside a Mac OS X bundle, CFBundle, or framework.
-
-Executable targets with the MACOSX_BUNDLE property set are built as
-Mac OS X application bundles on Apple platforms.  Shared library
-targets with the FRAMEWORK property set are built as Mac OS X
-frameworks on Apple platforms.  Module library targets with the BUNDLE
-property set are built as Mac OS X CFBundle bundles on Apple
-platforms.  Source files listed in the target with this property set
-will be copied to a directory inside the bundle or framework content
-folder specified by the property value.  For bundles the content
-folder is "<name>.app/Contents".  For frameworks the content folder is
-"<name>.framework/Versions/<version>".  For cfbundles the content
-folder is "<name>.bundle/Contents" (unless the extension is changed).
-See the PUBLIC_HEADER, PRIVATE_HEADER, and RESOURCE target properties
-for specifying files meant for Headers, PrivateHeaders, or Resources
-directories.
diff --git a/share/cmake-3.2/Help/prop_sf/OBJECT_DEPENDS.rst b/share/cmake-3.2/Help/prop_sf/OBJECT_DEPENDS.rst
deleted file mode 100644
index 18022de..0000000
--- a/share/cmake-3.2/Help/prop_sf/OBJECT_DEPENDS.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-OBJECT_DEPENDS
---------------
-
-Additional files on which a compiled object file depends.
-
-Specifies a semicolon-separated list of full-paths to files on which
-any object files compiled from this source file depend.  An object
-file will be recompiled if any of the named files is newer than it.
-
-This property need not be used to specify the dependency of a source
-file on a generated header file that it includes.  Although the
-property was originally introduced for this purpose, it is no longer
-necessary.  If the generated header file is created by a custom
-command in the same target as the source file, the automatic
-dependency scanning process will recognize the dependency.  If the
-generated header file is created by another target, an inter-target
-dependency should be created with the add_dependencies command (if one
-does not already exist due to linking relationships).
diff --git a/share/cmake-3.2/Help/prop_test/ATTACHED_FILES_ON_FAIL.rst b/share/cmake-3.2/Help/prop_test/ATTACHED_FILES_ON_FAIL.rst
deleted file mode 100644
index 6819143..0000000
--- a/share/cmake-3.2/Help/prop_test/ATTACHED_FILES_ON_FAIL.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-ATTACHED_FILES_ON_FAIL
-----------------------
-
-Attach a list of files to a dashboard submission if the test fails.
-
-Same as ATTACHED_FILES, but these files will only be included if the
-test does not pass.
diff --git a/share/cmake-3.2/Help/prop_test/FAIL_REGULAR_EXPRESSION.rst b/share/cmake-3.2/Help/prop_test/FAIL_REGULAR_EXPRESSION.rst
deleted file mode 100644
index b02d17d..0000000
--- a/share/cmake-3.2/Help/prop_test/FAIL_REGULAR_EXPRESSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-FAIL_REGULAR_EXPRESSION
------------------------
-
-If the output matches this regular expression the test will fail.
-
-If set, if the output matches one of specified regular expressions,
-the test will fail.For example: FAIL_REGULAR_EXPRESSION
-"[^a-z]Error;ERROR;Failed"
diff --git a/share/cmake-3.2/Help/prop_test/PASS_REGULAR_EXPRESSION.rst b/share/cmake-3.2/Help/prop_test/PASS_REGULAR_EXPRESSION.rst
deleted file mode 100644
index bb35f77..0000000
--- a/share/cmake-3.2/Help/prop_test/PASS_REGULAR_EXPRESSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-PASS_REGULAR_EXPRESSION
------------------------
-
-The output must match this regular expression for the test to pass.
-
-If set, the test output will be checked against the specified regular
-expressions and at least one of the regular expressions has to match,
-otherwise the test will fail.
diff --git a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY.rst b/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY.rst
deleted file mode 100644
index df57dba..0000000
--- a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-ARCHIVE_OUTPUT_DIRECTORY
-------------------------
-
-.. |XXX| replace:: ARCHIVE
-.. |xxx| replace:: archive
-.. |CMAKE_XXX_OUTPUT_DIRECTORY| replace:: CMAKE_ARCHIVE_OUTPUT_DIRECTORY
-.. include:: XXX_OUTPUT_DIRECTORY.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst
deleted file mode 100644
index 3c0c4fd..0000000
--- a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
----------------------------------
-
-Per-configuration output directory for ARCHIVE target files.
-
-This is a per-configuration version of ARCHIVE_OUTPUT_DIRECTORY, but
-multi-configuration generators (VS, Xcode) do NOT append a
-per-configuration subdirectory to the specified directory.  This
-property is initialized by the value of the variable
-CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
-created.
diff --git a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_NAME.rst b/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_NAME.rst
deleted file mode 100644
index a137bb8..0000000
--- a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_NAME.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-ARCHIVE_OUTPUT_NAME
--------------------
-
-.. |XXX| replace:: ARCHIVE
-.. |xxx| replace:: archive
-.. include:: XXX_OUTPUT_NAME.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG.rst
deleted file mode 100644
index 314fa58..0000000
--- a/share/cmake-3.2/Help/prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-ARCHIVE_OUTPUT_NAME_<CONFIG>
-----------------------------
-
-Per-configuration output name for ARCHIVE target files.
-
-This is the configuration-specific version of ARCHIVE_OUTPUT_NAME.
diff --git a/share/cmake-3.2/Help/prop_tgt/AUTOMOC.rst b/share/cmake-3.2/Help/prop_tgt/AUTOMOC.rst
deleted file mode 100644
index 045ebb2..0000000
--- a/share/cmake-3.2/Help/prop_tgt/AUTOMOC.rst
+++ /dev/null
@@ -1,37 +0,0 @@
-AUTOMOC
--------
-
-Should the target be processed with automoc (for Qt projects).
-
-AUTOMOC is a boolean specifying whether CMake will handle the Qt ``moc``
-preprocessor automatically, i.e.  without having to use the
-:module:`QT4_WRAP_CPP() <FindQt4>` or QT5_WRAP_CPP() macro.  Currently Qt4 and Qt5 are
-supported.  When this property is set ``ON``, CMake will scan the
-source files at build time and invoke moc accordingly.  If an ``#include``
-statement like ``#include "moc_foo.cpp"`` is found, the ``Q_OBJECT`` class
-declaration is expected in the header, and ``moc`` is run on the header
-file.  If an ``#include`` statement like ``#include "foo.moc"`` is found, then
-a ``Q_OBJECT`` is expected in the current source file and ``moc`` is run on
-the file itself.  Additionally, header files with the same base name (like
-``foo.h``) or ``_p`` appended to the base name (like ``foo_p.h``) are parsed
-for ``Q_OBJECT`` macros, and if found, ``moc`` is also executed on those files.
-``AUTOMOC`` checks multiple header alternative extensions, such as
-``hpp``, ``hxx`` etc when searching for headers.
-The resulting moc files, which are not included as shown above in any
-of the source files are included in a generated
-``<targetname>_automoc.cpp`` file, which is compiled as part of the
-target.  This property is initialized by the value of the
-:variable:`CMAKE_AUTOMOC` variable if it is set when a target is created.
-
-Additional command line options for moc can be set via the
-:prop_tgt:`AUTOMOC_MOC_OPTIONS` property.
-
-By enabling the :variable:`CMAKE_AUTOMOC_RELAXED_MODE` variable the
-rules for searching the files which will be processed by moc can be relaxed.
-See the documentation for this variable for more details.
-
-The global property :prop_gbl:`AUTOGEN_TARGETS_FOLDER` can be used to group the
-automoc targets together in an IDE, e.g.  in MSVS.
-
-See the :manual:`cmake-qt(7)` manual for more information on using CMake
-with Qt.
diff --git a/share/cmake-3.2/Help/prop_tgt/BUNDLE.rst b/share/cmake-3.2/Help/prop_tgt/BUNDLE.rst
deleted file mode 100644
index 166659f..0000000
--- a/share/cmake-3.2/Help/prop_tgt/BUNDLE.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-BUNDLE
-------
-
-This target is a CFBundle on the Mac.
-
-If a module library target has this property set to true it will be
-built as a CFBundle when built on the mac.  It will have the directory
-structure required for a CFBundle and will be suitable to be used for
-creating Browser Plugins or other application resources.
diff --git a/share/cmake-3.2/Help/prop_tgt/BUNDLE_EXTENSION.rst b/share/cmake-3.2/Help/prop_tgt/BUNDLE_EXTENSION.rst
deleted file mode 100644
index 94ac935..0000000
--- a/share/cmake-3.2/Help/prop_tgt/BUNDLE_EXTENSION.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-BUNDLE_EXTENSION
-----------------
-
-The file extension used to name a BUNDLE target on the Mac.
-
-The default value is "bundle" - you can also use "plugin" or whatever
-file extension is required by the host app for your bundle.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_DEFINITIONS.rst b/share/cmake-3.2/Help/prop_tgt/COMPILE_DEFINITIONS.rst
deleted file mode 100644
index 00c49c3..0000000
--- a/share/cmake-3.2/Help/prop_tgt/COMPILE_DEFINITIONS.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-COMPILE_DEFINITIONS
--------------------
-
-Preprocessor definitions for compiling a target's sources.
-
-The ``COMPILE_DEFINITIONS`` property may be set to a semicolon-separated
-list of preprocessor definitions using the syntax ``VAR`` or ``VAR=value``.
-Function-style definitions are not supported.  CMake will
-automatically escape the value correctly for the native build system
-(note that CMake language syntax may require escapes to specify some
-values).
-
-CMake will automatically drop some definitions that are not supported
-by the native build tool.  The VS6 IDE does not support definition
-values with spaces (but NMake does).
-
-.. include:: /include/COMPILE_DEFINITIONS_DISCLAIMER.txt
-
-Contents of ``COMPILE_DEFINITIONS`` may use "generator expressions" with the
-syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual
-for available expressions.  See the :manual:`cmake-buildsystem(7)` manual
-for more on defining buildsystem properties.
-
-The corresponding :prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` property may
-be set to specify per-configuration definitions.  Generator expressions
-should be preferred instead of setting the alternative property.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_FEATURES.rst b/share/cmake-3.2/Help/prop_tgt/COMPILE_FEATURES.rst
deleted file mode 100644
index 225ffee..0000000
--- a/share/cmake-3.2/Help/prop_tgt/COMPILE_FEATURES.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-COMPILE_FEATURES
-----------------
-
-Compiler features enabled for this target.
-
-The list of features in this property are a subset of the features listed
-in the :variable:`CMAKE_CXX_COMPILE_FEATURES` variable.
-
-Contents of ``COMPILE_FEATURES`` may use "generator expressions" with the
-syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual for
-available expressions.  See the :manual:`cmake-compile-features(7)` manual
-for information on compile features.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_FLAGS.rst b/share/cmake-3.2/Help/prop_tgt/COMPILE_FLAGS.rst
deleted file mode 100644
index 6ee6c51..0000000
--- a/share/cmake-3.2/Help/prop_tgt/COMPILE_FLAGS.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-COMPILE_FLAGS
--------------
-
-Additional flags to use when compiling this target's sources.
-
-The COMPILE_FLAGS property sets additional compiler flags used to
-build sources within the target.  Use COMPILE_DEFINITIONS to pass
-additional preprocessor definitions.
-
-This property is deprecated.  Use the COMPILE_OPTIONS property or the
-target_compile_options command instead.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_OPTIONS.rst b/share/cmake-3.2/Help/prop_tgt/COMPILE_OPTIONS.rst
deleted file mode 100644
index 27cbec1..0000000
--- a/share/cmake-3.2/Help/prop_tgt/COMPILE_OPTIONS.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-COMPILE_OPTIONS
----------------
-
-List of options to pass to the compiler.
-
-This property specifies the list of options specified so far for this
-property.
-
-This property is intialized by the :prop_dir:`COMPILE_OPTIONS` directory
-property, which is used by the generators to set the options for the
-compiler.
-
-Contents of ``COMPILE_OPTIONS`` may use "generator expressions" with the
-syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual
-for available expressions.  See the :manual:`cmake-buildsystem(7)` manual
-for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_NOTE.txt b/share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_NOTE.txt
deleted file mode 100644
index 5941d72..0000000
--- a/share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_NOTE.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-.. note::
- The compiler-generated program database files are specified by the
- ``/Fd`` compiler flag and are not the same as linker-generated
- program database files specified by the ``/pdb`` linker flag.
- Use the |PDB_XXX| property to specify the latter.
-
- This property is not implemented by the :generator:`Visual Studio 6`
- generator.
diff --git a/share/cmake-3.2/Help/prop_tgt/CONFIG_OUTPUT_NAME.rst b/share/cmake-3.2/Help/prop_tgt/CONFIG_OUTPUT_NAME.rst
deleted file mode 100644
index f2c875e..0000000
--- a/share/cmake-3.2/Help/prop_tgt/CONFIG_OUTPUT_NAME.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-<CONFIG>_OUTPUT_NAME
---------------------
-
-Old per-configuration target file base name.
-
-This is a configuration-specific version of OUTPUT_NAME.  Use
-OUTPUT_NAME_<CONFIG> instead.
diff --git a/share/cmake-3.2/Help/prop_tgt/CXX_EXTENSIONS.rst b/share/cmake-3.2/Help/prop_tgt/CXX_EXTENSIONS.rst
deleted file mode 100644
index 67c5cb0..0000000
--- a/share/cmake-3.2/Help/prop_tgt/CXX_EXTENSIONS.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-CXX_EXTENSIONS
---------------
-
-Boolean specifying whether compiler specific extensions are requested.
-
-This property specifies whether compiler specific extensions should be
-used.  For some compilers, this results in adding a flag such
-as ``-std=gnu++11`` instead of ``-std=c++11`` to the compile line.  This
-property is ``ON`` by default.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-This property is initialized by the value of
-the :variable:`CMAKE_CXX_EXTENSIONS` variable if it is set when a target
-is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/CXX_STANDARD.rst b/share/cmake-3.2/Help/prop_tgt/CXX_STANDARD.rst
deleted file mode 100644
index 65b30ec..0000000
--- a/share/cmake-3.2/Help/prop_tgt/CXX_STANDARD.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-CXX_STANDARD
-------------
-
-The C++ standard whose features are requested to build this target.
-
-This property specifies the C++ standard whose features are requested
-to build this target.  For some compilers, this results in adding a
-flag such as ``-std=gnu++11`` to the compile line.  For compilers that
-have no notion of a standard level, such as MSVC, this has no effect.
-
-Supported values are ``98``, ``11`` and ``14``.
-
-If the value requested does not result in a compile flag being added for
-the compiler in use, a previous standard flag will be added instead.  This
-means that using:
-
-.. code-block:: cmake
-
-  set_property(TARGET tgt PROPERTY CXX_STANDARD 11)
-
-with a compiler which does not support ``-std=gnu++11`` or an equivalent
-flag will not result in an error or warning, but will instead add the
-``-std=gnu++98`` flag if supported.  This "decay" behavior may be controlled
-with the :prop_tgt:`CXX_STANDARD_REQUIRED` target property.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-This property is initialized by the value of
-the :variable:`CMAKE_CXX_STANDARD` variable if it is set when a target
-is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/CXX_STANDARD_REQUIRED.rst b/share/cmake-3.2/Help/prop_tgt/CXX_STANDARD_REQUIRED.rst
deleted file mode 100644
index 4e24e5e..0000000
--- a/share/cmake-3.2/Help/prop_tgt/CXX_STANDARD_REQUIRED.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-CXX_STANDARD_REQUIRED
----------------------
-
-Boolean describing whether the value of :prop_tgt:`CXX_STANDARD` is a requirement.
-
-If this property is set to ``ON``, then the value of the
-:prop_tgt:`CXX_STANDARD` target property is treated as a requirement.  If this
-property is ``OFF`` or unset, the :prop_tgt:`CXX_STANDARD` target property is
-treated as optional and may "decay" to a previous standard if the requested is
-not available.  For compilers that have no notion of a standard level, such as
-MSVC, this has no effect.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-This property is initialized by the value of
-the :variable:`CMAKE_CXX_STANDARD_REQUIRED` variable if it is set when a
-target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/C_EXTENSIONS.rst b/share/cmake-3.2/Help/prop_tgt/C_EXTENSIONS.rst
deleted file mode 100644
index dc48cc6..0000000
--- a/share/cmake-3.2/Help/prop_tgt/C_EXTENSIONS.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-C_EXTENSIONS
-------------
-
-Boolean specifying whether compiler specific extensions are requested.
-
-This property specifies whether compiler specific extensions should be
-used.  For some compilers, this results in adding a flag such
-as ``-std=gnu11`` instead of ``-std=c11`` to the compile line.  This
-property is ``ON`` by default.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-This property is initialized by the value of
-the :variable:`CMAKE_C_EXTENSIONS` variable if it is set when a target
-is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/C_STANDARD.rst b/share/cmake-3.2/Help/prop_tgt/C_STANDARD.rst
deleted file mode 100644
index 3aa74af..0000000
--- a/share/cmake-3.2/Help/prop_tgt/C_STANDARD.rst
+++ /dev/null
@@ -1,31 +0,0 @@
-C_STANDARD
-----------
-
-The C standard whose features are requested to build this target.
-
-This property specifies the C standard whose features are requested
-to build this target.  For some compilers, this results in adding a
-flag such as ``-std=gnu11`` to the compile line.  For compilers that
-have no notion of a standard level, such as MSVC, this has no effect.
-
-Supported values are ``90``, ``99`` and ``11``.
-
-If the value requested does not result in a compile flag being added for
-the compiler in use, a previous standard flag will be added instead.  This
-means that using:
-
-.. code-block:: cmake
-
-  set_property(TARGET tgt PROPERTY C_STANDARD 11)
-
-with a compiler which does not support ``-std=gnu11`` or an equivalent
-flag will not result in an error or warning, but will instead add the
-``-std=gnu99`` or ``-std=gnu90`` flag if supported.  This "decay" behavior may
-be controlled with the :prop_tgt:`C_STANDARD_REQUIRED` target property.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-This property is initialized by the value of
-the :variable:`CMAKE_C_STANDARD` variable if it is set when a target
-is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/C_STANDARD_REQUIRED.rst b/share/cmake-3.2/Help/prop_tgt/C_STANDARD_REQUIRED.rst
deleted file mode 100644
index 743d568..0000000
--- a/share/cmake-3.2/Help/prop_tgt/C_STANDARD_REQUIRED.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-C_STANDARD_REQUIRED
--------------------
-
-Boolean describing whether the value of :prop_tgt:`C_STANDARD` is a requirement.
-
-If this property is set to ``ON``, then the value of the
-:prop_tgt:`C_STANDARD` target property is treated as a requirement.  If this
-property is ``OFF`` or unset, the :prop_tgt:`C_STANDARD` target property is
-treated as optional and may "decay" to a previous standard if the requested is
-not available.  For compilers that have no notion of a standard level, such as
-MSVC, this has no effect.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
-
-This property is initialized by the value of
-the :variable:`CMAKE_C_STANDARD_REQUIRED` variable if it is set when a
-target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/ENABLE_EXPORTS.rst b/share/cmake-3.2/Help/prop_tgt/ENABLE_EXPORTS.rst
deleted file mode 100644
index 283f5a8..0000000
--- a/share/cmake-3.2/Help/prop_tgt/ENABLE_EXPORTS.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-ENABLE_EXPORTS
---------------
-
-Specify whether an executable exports symbols for loadable modules.
-
-Normally an executable does not export any symbols because it is the
-final program.  It is possible for an executable to export symbols to
-be used by loadable modules.  When this property is set to true CMake
-will allow other targets to "link" to the executable with the
-TARGET_LINK_LIBRARIES command.  On all platforms a target-level
-dependency on the executable is created for targets that link to it.
-For DLL platforms an import library will be created for the exported
-symbols and then used for linking.  All Windows-based systems
-including Cygwin are DLL platforms.  For non-DLL platforms that
-require all symbols to be resolved at link time, such as Mac OS X, the
-module will "link" to the executable using a flag like
-"-bundle_loader".  For other non-DLL platforms the link rule is simply
-ignored since the dynamic loader will automatically bind symbols when
-the module is loaded.
diff --git a/share/cmake-3.2/Help/prop_tgt/FRAMEWORK.rst b/share/cmake-3.2/Help/prop_tgt/FRAMEWORK.rst
deleted file mode 100644
index 9f472c0..0000000
--- a/share/cmake-3.2/Help/prop_tgt/FRAMEWORK.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-FRAMEWORK
----------
-
-This target is a framework on the Mac.
-
-If a shared library target has this property set to true it will be
-built as a framework when built on the mac.  It will have the
-directory structure required for a framework and will be suitable to
-be used with the -framework option
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_COMPILE_FEATURES.rst b/share/cmake-3.2/Help/prop_tgt/INTERFACE_COMPILE_FEATURES.rst
deleted file mode 100644
index 8dfec5f..0000000
--- a/share/cmake-3.2/Help/prop_tgt/INTERFACE_COMPILE_FEATURES.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-INTERFACE_COMPILE_FEATURES
---------------------------
-
-.. |property_name| replace:: compile features
-.. |command_name| replace:: :command:`target_compile_features`
-.. |PROPERTY_INTERFACE_NAME| replace:: ``INTERFACE_COMPILE_FEATURES``
-.. |PROPERTY_LINK| replace:: :prop_tgt:`COMPILE_FEATURES`
-.. |PROPERTY_GENEX| replace:: ``$<TARGET_PROPERTY:foo,INTERFACE_COMPILE_FEATURES>``
-.. include:: INTERFACE_BUILD_PROPERTY.txt
-
-See the :manual:`cmake-compile-features(7)` manual for information on compile
-features.
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_INCLUDE_DIRECTORIES.rst b/share/cmake-3.2/Help/prop_tgt/INTERFACE_INCLUDE_DIRECTORIES.rst
deleted file mode 100644
index 1cfd7a8..0000000
--- a/share/cmake-3.2/Help/prop_tgt/INTERFACE_INCLUDE_DIRECTORIES.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-INTERFACE_INCLUDE_DIRECTORIES
------------------------------
-
-.. |property_name| replace:: include directories
-.. |command_name| replace:: :command:`target_include_directories`
-.. |PROPERTY_INTERFACE_NAME| replace:: ``INTERFACE_INCLUDE_DIRECTORIES``
-.. |PROPERTY_LINK| replace:: :prop_tgt:`INCLUDE_DIRECTORIES`
-.. |PROPERTY_GENEX| replace:: ``$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>``
-.. include:: INTERFACE_BUILD_PROPERTY.txt
-
-Include directories usage requirements commonly differ between the build-tree
-and the install-tree.  The ``BUILD_INTERFACE`` and ``INSTALL_INTERFACE``
-generator expressions can be used to describe separate usage requirements
-based on the usage location.  Relative paths are allowed within the
-``INSTALL_INTERFACE`` expression and are interpreted relative to the
-installation prefix.  For example:
-
-.. code-block:: cmake
-
-  target_include_directories(mylib INTERFACE
-    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include/mylib>
-    $<INSTALL_INTERFACE:include/mylib>  # <prefix>/include/mylib
-  )
-
-.. |INTERFACE_PROPERTY_LINK| replace:: ``INTERFACE_INCLUDE_DIRECTORIES``
-.. include:: /include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_LINK_LIBRARIES.rst b/share/cmake-3.2/Help/prop_tgt/INTERFACE_LINK_LIBRARIES.rst
deleted file mode 100644
index 55b7b8d..0000000
--- a/share/cmake-3.2/Help/prop_tgt/INTERFACE_LINK_LIBRARIES.rst
+++ /dev/null
@@ -1,21 +0,0 @@
-INTERFACE_LINK_LIBRARIES
-------------------------
-
-List public interface libraries for a library.
-
-This property contains the list of transitive link dependencies.  When
-the target is linked into another target using the
-:command:`target_link_libraries` command, the libraries listed (and
-recursively their link interface libraries) will be provided to the
-other target also.  This property is overridden by the
-:prop_tgt:`LINK_INTERFACE_LIBRARIES` or
-:prop_tgt:`LINK_INTERFACE_LIBRARIES_<CONFIG>` property if policy
-:policy:`CMP0022` is ``OLD`` or unset.
-
-Contents of ``INTERFACE_LINK_LIBRARIES`` may use "generator expressions"
-with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
-
-.. |INTERFACE_PROPERTY_LINK| replace:: ``INTERFACE_LINK_LIBRARIES``
-.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_SOURCES.rst b/share/cmake-3.2/Help/prop_tgt/INTERFACE_SOURCES.rst
deleted file mode 100644
index 696ee95..0000000
--- a/share/cmake-3.2/Help/prop_tgt/INTERFACE_SOURCES.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-INTERFACE_SOURCES
------------------
-
-List of interface sources to compile into consuming targets.
-
-Targets may populate this property to publish the sources
-for consuming targets to compile.  The :command:`target_sources` command
-populates this property with values given to the ``PUBLIC`` and
-``INTERFACE`` keywords.  Projects may also get and set the property directly.
-
-When target dependencies are specified using :command:`target_link_libraries`,
-CMake will read this property from all target dependencies to determine the
-sources of the consumer.
-
-Targets with ``INTERFACE_SOURCES`` may not be exported with the
-:command:`export` or :command:`install(EXPORT)` commands. This limitation may be
-lifted in a future version of CMake.
-
-Contents of ``INTERFACE_SOURCES`` may use "generator expressions"
-with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
-manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
-manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/prop_tgt/JOB_POOL_LINK.rst b/share/cmake-3.2/Help/prop_tgt/JOB_POOL_LINK.rst
deleted file mode 100644
index 716f53f..0000000
--- a/share/cmake-3.2/Help/prop_tgt/JOB_POOL_LINK.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-JOB_POOL_LINK
--------------
-
-Ninja only: Pool used for linking.
-
-The number of parallel link processes could be limited by defining
-pools with the global :prop_gbl:`JOB_POOLS`
-property and then specifing here the pool name.
-
-For instance:
-
-.. code-block:: cmake
-
-  set_property(TARGET myexe PROPERTY JOB_POOL_LINK two_jobs)
-
-This property is initialized by the value of :variable:`CMAKE_JOB_POOL_LINK`.
diff --git a/share/cmake-3.2/Help/prop_tgt/LANG_VISIBILITY_PRESET.rst b/share/cmake-3.2/Help/prop_tgt/LANG_VISIBILITY_PRESET.rst
deleted file mode 100644
index d4bde17..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LANG_VISIBILITY_PRESET.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-<LANG>_VISIBILITY_PRESET
-------------------------
-
-Value for symbol visibility compile flags
-
-The <LANG>_VISIBILITY_PRESET property determines the value passed in a
-visibility related compile option, such as -fvisibility= for <LANG>.
-This property only has an affect for libraries and executables with
-exports.  This property is initialized by the value of the variable
-CMAKE_<LANG>_VISIBILITY_PRESET if it is set when a target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY.rst b/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY.rst
deleted file mode 100644
index e1d3a82..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-LIBRARY_OUTPUT_DIRECTORY
-------------------------
-
-.. |XXX| replace:: LIBRARY
-.. |xxx| replace:: library
-.. |CMAKE_XXX_OUTPUT_DIRECTORY| replace:: CMAKE_LIBRARY_OUTPUT_DIRECTORY
-.. include:: XXX_OUTPUT_DIRECTORY.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst
deleted file mode 100644
index 2a38373..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
----------------------------------
-
-Per-configuration output directory for LIBRARY target files.
-
-This is a per-configuration version of LIBRARY_OUTPUT_DIRECTORY, but
-multi-configuration generators (VS, Xcode) do NOT append a
-per-configuration subdirectory to the specified directory.  This
-property is initialized by the value of the variable
-CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
-created.
diff --git a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_NAME.rst b/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_NAME.rst
deleted file mode 100644
index 9e9d401..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_NAME.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-LIBRARY_OUTPUT_NAME
--------------------
-
-.. |XXX| replace:: LIBRARY
-.. |xxx| replace:: library
-.. include:: XXX_OUTPUT_NAME.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG.rst
deleted file mode 100644
index 785d1b2..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-LIBRARY_OUTPUT_NAME_<CONFIG>
-----------------------------
-
-Per-configuration output name for LIBRARY target files.
-
-This is the configuration-specific version of LIBRARY_OUTPUT_NAME.
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_LIBRARIES.rst b/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_LIBRARIES.rst
deleted file mode 100644
index 2e859eb..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_LIBRARIES.rst
+++ /dev/null
@@ -1,28 +0,0 @@
-LINK_INTERFACE_LIBRARIES
-------------------------
-
-List public interface libraries for a shared library or executable.
-
-By default linking to a shared library target transitively links to
-targets with which the library itself was linked.  For an executable
-with exports (see the :prop_tgt:`ENABLE_EXPORTS` target property) no
-default transitive link dependencies are used.  This property replaces the default
-transitive link dependencies with an explicit list.  When the target
-is linked into another target using the :command:`target_link_libraries`
-command, the libraries listed (and recursively
-their link interface libraries) will be provided to the other target
-also.  If the list is empty then no transitive link dependencies will
-be incorporated when this target is linked into another target even if
-the default set is non-empty.  This property is initialized by the
-value of the :variable:`CMAKE_LINK_INTERFACE_LIBRARIES` variable if it is
-set when a target is created.  This property is ignored for ``STATIC``
-libraries.
-
-This property is overridden by the :prop_tgt:`INTERFACE_LINK_LIBRARIES`
-property if policy :policy:`CMP0022` is ``NEW``.
-
-This property is deprecated.  Use :prop_tgt:`INTERFACE_LINK_LIBRARIES`
-instead.
-
-.. |INTERFACE_PROPERTY_LINK| replace:: ``LINK_INTERFACE_LIBRARIES``
-.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG.rst
deleted file mode 100644
index 7f2b5dd..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-LINK_INTERFACE_LIBRARIES_<CONFIG>
----------------------------------
-
-Per-configuration list of public interface libraries for a target.
-
-This is the configuration-specific version of
-:prop_tgt:`LINK_INTERFACE_LIBRARIES`.  If set, this property completely
-overrides the generic property for the named configuration.
-
-This property is overridden by the :prop_tgt:`INTERFACE_LINK_LIBRARIES`
-property if policy :policy:`CMP0022` is ``NEW``.
-
-This property is deprecated.  Use :prop_tgt:`INTERFACE_LINK_LIBRARIES`
-instead.
-
-.. |INTERFACE_PROPERTY_LINK| replace:: ``LINK_INTERFACE_LIBRARIES_<CONFIG>``
-.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_SEARCH_END_STATIC.rst b/share/cmake-3.2/Help/prop_tgt/LINK_SEARCH_END_STATIC.rst
deleted file mode 100644
index fe105bd..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LINK_SEARCH_END_STATIC.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-LINK_SEARCH_END_STATIC
-----------------------
-
-End a link line such that static system libraries are used.
-
-Some linkers support switches such as -Bstatic and -Bdynamic to
-determine whether to use static or shared libraries for -lXXX options.
-CMake uses these options to set the link type for libraries whose full
-paths are not known or (in some cases) are in implicit link
-directories for the platform.  By default CMake adds an option at the
-end of the library list (if necessary) to set the linker search type
-back to its starting type.  This property switches the final linker
-search type to -Bstatic regardless of how it started.  See also
-LINK_SEARCH_START_STATIC.
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_SEARCH_START_STATIC.rst b/share/cmake-3.2/Help/prop_tgt/LINK_SEARCH_START_STATIC.rst
deleted file mode 100644
index ca899fe..0000000
--- a/share/cmake-3.2/Help/prop_tgt/LINK_SEARCH_START_STATIC.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-LINK_SEARCH_START_STATIC
-------------------------
-
-Assume the linker looks for static libraries by default.
-
-Some linkers support switches such as -Bstatic and -Bdynamic to
-determine whether to use static or shared libraries for -lXXX options.
-CMake uses these options to set the link type for libraries whose full
-paths are not known or (in some cases) are in implicit link
-directories for the platform.  By default the linker search type is
-assumed to be -Bdynamic at the beginning of the library list.  This
-property switches the assumption to -Bstatic.  It is intended for use
-when linking an executable statically (e.g.  with the GNU -static
-option).  See also LINK_SEARCH_END_STATIC.
diff --git a/share/cmake-3.2/Help/prop_tgt/MACOSX_BUNDLE.rst b/share/cmake-3.2/Help/prop_tgt/MACOSX_BUNDLE.rst
deleted file mode 100644
index ff21e61..0000000
--- a/share/cmake-3.2/Help/prop_tgt/MACOSX_BUNDLE.rst
+++ /dev/null
@@ -1,12 +0,0 @@
-MACOSX_BUNDLE
--------------
-
-Build an executable as an application bundle on Mac OS X.
-
-When this property is set to true the executable when built on Mac OS
-X will be created as an application bundle.  This makes it a GUI
-executable that can be launched from the Finder.  See the
-MACOSX_BUNDLE_INFO_PLIST target property for information about
-creation of the Info.plist file for the application bundle.  This
-property is initialized by the value of the variable
-CMAKE_MACOSX_BUNDLE if it is set when a target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/MACOSX_BUNDLE_INFO_PLIST.rst b/share/cmake-3.2/Help/prop_tgt/MACOSX_BUNDLE_INFO_PLIST.rst
deleted file mode 100644
index 097cce1..0000000
--- a/share/cmake-3.2/Help/prop_tgt/MACOSX_BUNDLE_INFO_PLIST.rst
+++ /dev/null
@@ -1,29 +0,0 @@
-MACOSX_BUNDLE_INFO_PLIST
-------------------------
-
-Specify a custom Info.plist template for a Mac OS X App Bundle.
-
-An executable target with MACOSX_BUNDLE enabled will be built as an
-application bundle on Mac OS X.  By default its Info.plist file is
-created by configuring a template called MacOSXBundleInfo.plist.in
-located in the CMAKE_MODULE_PATH.  This property specifies an
-alternative template file name which may be a full path.
-
-The following target properties may be set to specify content to be
-configured into the file:
-
-::
-
-  MACOSX_BUNDLE_INFO_STRING
-  MACOSX_BUNDLE_ICON_FILE
-  MACOSX_BUNDLE_GUI_IDENTIFIER
-  MACOSX_BUNDLE_LONG_VERSION_STRING
-  MACOSX_BUNDLE_BUNDLE_NAME
-  MACOSX_BUNDLE_SHORT_VERSION_STRING
-  MACOSX_BUNDLE_BUNDLE_VERSION
-  MACOSX_BUNDLE_COPYRIGHT
-
-CMake variables of the same name may be set to affect all targets in a
-directory that do not have each specific property set.  If a custom
-Info.plist is specified by this property it may of course hard-code
-all the settings instead of using the target properties.
diff --git a/share/cmake-3.2/Help/prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST.rst b/share/cmake-3.2/Help/prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST.rst
deleted file mode 100644
index 729d929..0000000
--- a/share/cmake-3.2/Help/prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-MACOSX_FRAMEWORK_INFO_PLIST
----------------------------
-
-Specify a custom Info.plist template for a Mac OS X Framework.
-
-A library target with FRAMEWORK enabled will be built as a framework
-on Mac OS X.  By default its Info.plist file is created by configuring
-a template called MacOSXFrameworkInfo.plist.in located in the
-CMAKE_MODULE_PATH.  This property specifies an alternative template
-file name which may be a full path.
-
-The following target properties may be set to specify content to be
-configured into the file:
-
-::
-
-  MACOSX_FRAMEWORK_ICON_FILE
-  MACOSX_FRAMEWORK_IDENTIFIER
-  MACOSX_FRAMEWORK_SHORT_VERSION_STRING
-  MACOSX_FRAMEWORK_BUNDLE_VERSION
-
-CMake variables of the same name may be set to affect all targets in a
-directory that do not have each specific property set.  If a custom
-Info.plist is specified by this property it may of course hard-code
-all the settings instead of using the target properties.
diff --git a/share/cmake-3.2/Help/prop_tgt/MACOSX_RPATH.rst b/share/cmake-3.2/Help/prop_tgt/MACOSX_RPATH.rst
deleted file mode 100644
index d3934ba..0000000
--- a/share/cmake-3.2/Help/prop_tgt/MACOSX_RPATH.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-MACOSX_RPATH
-------------
-
-Whether to use rpaths on Mac OS X.
-
-When this property is set to true, the directory portion of
-the "install_name" field of shared libraries will be ``@rpath``
-unless overridden by :prop_tgt:`INSTALL_NAME_DIR`.  Runtime
-paths will also be embedded in binaries using this target and
-can be controlled by the :prop_tgt:`INSTALL_RPATH` target property.
-This property is initialized by the value of the variable
-:variable:`CMAKE_MACOSX_RPATH` if it is set when a target is
-created.
-
-Policy CMP0042 was introduced to change the default value of
-MACOSX_RPATH to ON.  This is because use of ``@rpath`` is a
-more flexible and powerful alternative to ``@executable_path`` and
-``@loader_path``.
diff --git a/share/cmake-3.2/Help/prop_tgt/NO_SONAME.rst b/share/cmake-3.2/Help/prop_tgt/NO_SONAME.rst
deleted file mode 100644
index fc668b5..0000000
--- a/share/cmake-3.2/Help/prop_tgt/NO_SONAME.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-NO_SONAME
----------
-
-Whether to set "soname" when linking a shared library or module.
-
-Enable this boolean property if a generated shared library or module
-should not have "soname" set.  Default is to set "soname" on all
-shared libraries and modules as long as the platform supports it.
-Generally, use this property only for leaf private libraries or
-plugins.  If you use it on normal shared libraries which other targets
-link against, on some platforms a linker will insert a full path to
-the library (as specified at link time) into the dynamic section of
-the dependent binary.  Therefore, once installed, dynamic loader may
-eventually fail to locate the library for the binary.
diff --git a/share/cmake-3.2/Help/prop_tgt/OSX_ARCHITECTURES_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/OSX_ARCHITECTURES_CONFIG.rst
deleted file mode 100644
index f8fdcff..0000000
--- a/share/cmake-3.2/Help/prop_tgt/OSX_ARCHITECTURES_CONFIG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-OSX_ARCHITECTURES_<CONFIG>
---------------------------
-
-Per-configuration OS X binary architectures for a target.
-
-This property is the configuration-specific version of
-:prop_tgt:`OSX_ARCHITECTURES`.
diff --git a/share/cmake-3.2/Help/prop_tgt/OUTPUT_NAME.rst b/share/cmake-3.2/Help/prop_tgt/OUTPUT_NAME.rst
deleted file mode 100644
index 97bf010..0000000
--- a/share/cmake-3.2/Help/prop_tgt/OUTPUT_NAME.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-OUTPUT_NAME
------------
-
-Output name for target files.
-
-This sets the base name for output files created for an executable or
-library target.  If not set, the logical target name is used by
-default.
diff --git a/share/cmake-3.2/Help/prop_tgt/OUTPUT_NAME_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/OUTPUT_NAME_CONFIG.rst
deleted file mode 100644
index 7bfbcbc..0000000
--- a/share/cmake-3.2/Help/prop_tgt/OUTPUT_NAME_CONFIG.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-OUTPUT_NAME_<CONFIG>
---------------------
-
-Per-configuration target file base name.
-
-This is the configuration-specific version of OUTPUT_NAME.
diff --git a/share/cmake-3.2/Help/prop_tgt/PDB_NAME.rst b/share/cmake-3.2/Help/prop_tgt/PDB_NAME.rst
deleted file mode 100644
index 479dec3..0000000
--- a/share/cmake-3.2/Help/prop_tgt/PDB_NAME.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-PDB_NAME
---------
-
-Output name for the MS debug symbol ``.pdb`` file generated by the
-linker for an executable or shared library target.
-
-This property specifies the base name for the debug symbols file.
-If not set, the logical target name is used by default.
-
-.. |COMPILE_PDB_XXX| replace:: :prop_tgt:`COMPILE_PDB_NAME`
-.. include:: PDB_NOTE.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/PDB_NOTE.txt b/share/cmake-3.2/Help/prop_tgt/PDB_NOTE.txt
deleted file mode 100644
index f90ea81..0000000
--- a/share/cmake-3.2/Help/prop_tgt/PDB_NOTE.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-.. note::
- This property does not apply to STATIC library targets because no linker
- is invoked to produce them so they have no linker-generated ``.pdb`` file
- containing debug symbols.
-
- The linker-generated program database files are specified by the
- ``/pdb`` linker flag and are not the same as compiler-generated
- program database files specified by the ``/Fd`` compiler flag.
- Use the |COMPILE_PDB_XXX| property to specify the latter.
-
- This property is not implemented by the :generator:`Visual Studio 6`
- generator.
diff --git a/share/cmake-3.2/Help/prop_tgt/PRIVATE_HEADER.rst b/share/cmake-3.2/Help/prop_tgt/PRIVATE_HEADER.rst
deleted file mode 100644
index da2127b..0000000
--- a/share/cmake-3.2/Help/prop_tgt/PRIVATE_HEADER.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-PRIVATE_HEADER
---------------
-
-Specify private header files in a FRAMEWORK shared library target.
-
-Shared library targets marked with the FRAMEWORK property generate
-frameworks on OS X and normal shared libraries on other platforms.
-This property may be set to a list of header files to be placed in the
-PrivateHeaders directory inside the framework folder.  On non-Apple
-platforms these headers may be installed using the PRIVATE_HEADER
-option to the install(TARGETS) command.
diff --git a/share/cmake-3.2/Help/prop_tgt/PUBLIC_HEADER.rst b/share/cmake-3.2/Help/prop_tgt/PUBLIC_HEADER.rst
deleted file mode 100644
index 6e25d94..0000000
--- a/share/cmake-3.2/Help/prop_tgt/PUBLIC_HEADER.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-PUBLIC_HEADER
--------------
-
-Specify public header files in a FRAMEWORK shared library target.
-
-Shared library targets marked with the FRAMEWORK property generate
-frameworks on OS X and normal shared libraries on other platforms.
-This property may be set to a list of header files to be placed in the
-Headers directory inside the framework folder.  On non-Apple platforms
-these headers may be installed using the PUBLIC_HEADER option to the
-install(TARGETS) command.
diff --git a/share/cmake-3.2/Help/prop_tgt/RESOURCE.rst b/share/cmake-3.2/Help/prop_tgt/RESOURCE.rst
deleted file mode 100644
index 1e9921d..0000000
--- a/share/cmake-3.2/Help/prop_tgt/RESOURCE.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-RESOURCE
---------
-
-Specify resource files in a FRAMEWORK shared library target.
-
-Shared library targets marked with the FRAMEWORK property generate
-frameworks on OS X and normal shared libraries on other platforms.
-This property may be set to a list of files to be placed in the
-Resources directory inside the framework folder.  On non-Apple
-platforms these files may be installed using the RESOURCE option to
-the install(TARGETS) command.
diff --git a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY.rst b/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY.rst
deleted file mode 100644
index af5ef44..0000000
--- a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-RUNTIME_OUTPUT_DIRECTORY
-------------------------
-
-.. |XXX| replace:: RUNTIME
-.. |xxx| replace:: runtime
-.. |CMAKE_XXX_OUTPUT_DIRECTORY| replace:: CMAKE_RUNTIME_OUTPUT_DIRECTORY
-.. include:: XXX_OUTPUT_DIRECTORY.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst
deleted file mode 100644
index 10be6cf..0000000
--- a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
----------------------------------
-
-Per-configuration output directory for RUNTIME target files.
-
-This is a per-configuration version of RUNTIME_OUTPUT_DIRECTORY, but
-multi-configuration generators (VS, Xcode) do NOT append a
-per-configuration subdirectory to the specified directory.  This
-property is initialized by the value of the variable
-CMAKE_RUNTIME_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
-created.
diff --git a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_NAME.rst b/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_NAME.rst
deleted file mode 100644
index dc7dba4..0000000
--- a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_NAME.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-RUNTIME_OUTPUT_NAME
--------------------
-
-.. |XXX| replace:: RUNTIME
-.. |xxx| replace:: runtime
-.. include:: XXX_OUTPUT_NAME.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG.rst b/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG.rst
deleted file mode 100644
index f9029e5..0000000
--- a/share/cmake-3.2/Help/prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-RUNTIME_OUTPUT_NAME_<CONFIG>
-----------------------------
-
-Per-configuration output name for RUNTIME target files.
-
-This is the configuration-specific version of RUNTIME_OUTPUT_NAME.
diff --git a/share/cmake-3.2/Help/prop_tgt/TARGET_FILE_TYPES.txt b/share/cmake-3.2/Help/prop_tgt/TARGET_FILE_TYPES.txt
deleted file mode 100644
index 18489c7..0000000
--- a/share/cmake-3.2/Help/prop_tgt/TARGET_FILE_TYPES.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-There are three kinds of target files that may be built: archive,
-library, and runtime.  Executables are always treated as runtime
-targets.  Static libraries are always treated as archive targets.
-Module libraries are always treated as library targets.  For
-non-DLL platforms shared libraries are treated as library
-targets.  For DLL platforms the DLL part of a shared library is
-treated as a runtime target and the corresponding import library
-is treated as an archive target.  All Windows-based systems
-including Cygwin are DLL platforms.
diff --git a/share/cmake-3.2/Help/prop_tgt/VISIBILITY_INLINES_HIDDEN.rst b/share/cmake-3.2/Help/prop_tgt/VISIBILITY_INLINES_HIDDEN.rst
deleted file mode 100644
index e06d35c..0000000
--- a/share/cmake-3.2/Help/prop_tgt/VISIBILITY_INLINES_HIDDEN.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-VISIBILITY_INLINES_HIDDEN
--------------------------
-
-Whether to add a compile flag to hide symbols of inline functions
-
-The VISIBILITY_INLINES_HIDDEN property determines whether a flag for
-hiding symbols for inline functions, such as -fvisibility-inlines-hidden,
-should be used when invoking the compiler.  This property only has an affect
-for libraries and executables with exports.  This property is initialized by
-the value of the :variable:`CMAKE_VISIBILITY_INLINES_HIDDEN` if it is set
-when a target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/XCODE_ATTRIBUTE_an-attribute.rst b/share/cmake-3.2/Help/prop_tgt/XCODE_ATTRIBUTE_an-attribute.rst
deleted file mode 100644
index de98c37..0000000
--- a/share/cmake-3.2/Help/prop_tgt/XCODE_ATTRIBUTE_an-attribute.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-XCODE_ATTRIBUTE_<an-attribute>
-------------------------------
-
-Set Xcode target attributes directly.
-
-Tell the Xcode generator to set '<an-attribute>' to a given value in
-the generated Xcode project.  Ignored on other generators.
-
-See the :variable:`CMAKE_XCODE_ATTRIBUTE_<an-attribute>` variable
-to set attributes on all targets in a directory tree.
diff --git a/share/cmake-3.2/Help/prop_tgt/XXX_OUTPUT_DIRECTORY.txt b/share/cmake-3.2/Help/prop_tgt/XXX_OUTPUT_DIRECTORY.txt
deleted file mode 100644
index 65abbce..0000000
--- a/share/cmake-3.2/Help/prop_tgt/XXX_OUTPUT_DIRECTORY.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Output directory in which to build |XXX| target files.
-
-This property specifies the directory into which |xxx| target files
-should be built.  Multi-configuration generators (VS, Xcode) append a
-per-configuration subdirectory to the specified directory.
-
-.. include:: TARGET_FILE_TYPES.txt
-
-This property is initialized by the value of the variable
-|CMAKE_XXX_OUTPUT_DIRECTORY| if it is set when a target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/XXX_OUTPUT_NAME.txt b/share/cmake-3.2/Help/prop_tgt/XXX_OUTPUT_NAME.txt
deleted file mode 100644
index 9c4fc7c..0000000
--- a/share/cmake-3.2/Help/prop_tgt/XXX_OUTPUT_NAME.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-Output name for |XXX| target files.
-
-This property specifies the base name for |xxx| target files.  It
-overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties.
-
-.. include:: TARGET_FILE_TYPES.txt
diff --git a/share/cmake-3.2/Help/release/index.rst b/share/cmake-3.2/Help/release/index.rst
deleted file mode 100644
index a058bc1..0000000
--- a/share/cmake-3.2/Help/release/index.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-CMake Release Notes
-*******************
-
-..
-  This file should include the adjacent "dev.txt" file
-  in development versions but not in release versions.
-
-Releases
-========
-
-.. toctree::
-   :maxdepth: 1
-
-   3.2 <3.2>
-   3.1 <3.1>
-   3.0 <3.0>
diff --git a/share/cmake-3.2/Help/variable/APPLE.rst b/share/cmake-3.2/Help/variable/APPLE.rst
deleted file mode 100644
index 3afdee8..0000000
--- a/share/cmake-3.2/Help/variable/APPLE.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-APPLE
------
-
-True if running on Mac OS X.
-
-Set to true on Mac OS X.
diff --git a/share/cmake-3.2/Help/variable/BORLAND.rst b/share/cmake-3.2/Help/variable/BORLAND.rst
deleted file mode 100644
index 4af6085..0000000
--- a/share/cmake-3.2/Help/variable/BORLAND.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-BORLAND
--------
-
-True if the Borland compiler is being used.
-
-This is set to true if the Borland compiler is being used.
diff --git a/share/cmake-3.2/Help/variable/BUILD_SHARED_LIBS.rst b/share/cmake-3.2/Help/variable/BUILD_SHARED_LIBS.rst
deleted file mode 100644
index 6f30efb..0000000
--- a/share/cmake-3.2/Help/variable/BUILD_SHARED_LIBS.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-BUILD_SHARED_LIBS
------------------
-
-Global flag to cause add_library to create shared libraries if on.
-
-If present and true, this will cause all libraries to be built shared
-unless the library was explicitly added as a static library.  This
-variable is often added to projects as an OPTION so that each user of
-a project can decide if they want to build the project using shared or
-static libraries.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ABSOLUTE_DESTINATION_FILES.rst b/share/cmake-3.2/Help/variable/CMAKE_ABSOLUTE_DESTINATION_FILES.rst
deleted file mode 100644
index 3691453..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_ABSOLUTE_DESTINATION_FILES.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_ABSOLUTE_DESTINATION_FILES
---------------------------------
-
-List of files which have been installed using  an ABSOLUTE DESTINATION path.
-
-This variable is defined by CMake-generated cmake_install.cmake
-scripts.  It can be used (read-only) by programs or scripts that
-source those install scripts.  This is used by some CPack generators
-(e.g.  RPM).
diff --git a/share/cmake-3.2/Help/variable/CMAKE_APPBUNDLE_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_APPBUNDLE_PATH.rst
deleted file mode 100644
index 469b316..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_APPBUNDLE_PATH.rst
+++ /dev/null
@@ -1,5 +0,0 @@
-CMAKE_APPBUNDLE_PATH
---------------------
-
-Search path for OS X application bundles used by the :command:`find_program`,
-and :command:`find_package` commands.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY.rst b/share/cmake-3.2/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY.rst
deleted file mode 100644
index 6a22f73..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_ARCHIVE_OUTPUT_DIRECTORY
-------------------------------
-
-Where to put all the ARCHIVE targets when built.
-
-This variable is used to initialize the ARCHIVE_OUTPUT_DIRECTORY
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ARGC.rst b/share/cmake-3.2/Help/variable/CMAKE_ARGC.rst
deleted file mode 100644
index be120b8..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_ARGC.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_ARGC
-----------
-
-Number of command line arguments passed to CMake in script mode.
-
-When run in -P script mode, CMake sets this variable to the number of
-command line arguments.  See also CMAKE_ARGV0, 1, 2 ...
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ARGV0.rst b/share/cmake-3.2/Help/variable/CMAKE_ARGV0.rst
deleted file mode 100644
index e5ed419..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_ARGV0.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_ARGV0
------------
-
-Command line argument passed to CMake in script mode.
-
-When run in -P script mode, CMake sets this variable to the first
-command line argument.  It then also sets CMAKE_ARGV1, CMAKE_ARGV2,
-...  and so on, up to the number of command line arguments given.  See
-also CMAKE_ARGC.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AUTOMOC_RELAXED_MODE.rst b/share/cmake-3.2/Help/variable/CMAKE_AUTOMOC_RELAXED_MODE.rst
deleted file mode 100644
index a814d40..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_AUTOMOC_RELAXED_MODE.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMAKE_AUTOMOC_RELAXED_MODE
---------------------------
-
-Switch between strict and relaxed automoc mode.
-
-By default, :prop_tgt:`AUTOMOC` behaves exactly as described in the documentation
-of the :prop_tgt:`AUTOMOC` target property.  When set to ``TRUE``, it accepts more
-input and tries to find the correct input file for ``moc`` even if it
-differs from the documented behaviour.  In this mode it e.g.  also
-checks whether a header file is intended to be processed by moc when a
-``"foo.moc"`` file has been included.
-
-Relaxed mode has to be enabled for KDE4 compatibility.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AUTORCC.rst b/share/cmake-3.2/Help/variable/CMAKE_AUTORCC.rst
deleted file mode 100644
index 067f766..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_AUTORCC.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_AUTORCC
--------------
-
-Whether to handle ``rcc`` automatically for Qt targets.
-
-This variable is used to initialize the :prop_tgt:`AUTORCC` property on all the targets.
-See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AUTOUIC.rst b/share/cmake-3.2/Help/variable/CMAKE_AUTOUIC.rst
deleted file mode 100644
index 0beb555..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_AUTOUIC.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_AUTOUIC
--------------
-
-Whether to handle ``uic`` automatically for Qt targets.
-
-This variable is used to initialize the :prop_tgt:`AUTOUIC` property on all the targets.
-See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_BINARY_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_BINARY_DIR.rst
deleted file mode 100644
index 703bb58..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_BINARY_DIR.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_BINARY_DIR
-----------------
-
-The path to the top level of the build tree.
-
-This is the full path to the top level of the current CMake build
-tree.  For an in-source build, this would be the same as
-CMAKE_SOURCE_DIR.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_BUILD_TYPE.rst b/share/cmake-3.2/Help/variable/CMAKE_BUILD_TYPE.rst
deleted file mode 100644
index 68f08ba..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_BUILD_TYPE.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMAKE_BUILD_TYPE
-----------------
-
-Specifies the build type on single-configuration generators.
-
-This statically specifies what build type (configuration) will be
-built in this build tree.  Possible values are empty, Debug, Release,
-RelWithDebInfo and MinSizeRel.  This variable is only meaningful to
-single-configuration generators (such as make and Ninja) i.e.  those
-which choose a single configuration when CMake runs to generate a
-build tree as opposed to multi-configuration generators which offer
-selection of the build configuration within the generated build
-environment.  There are many per-config properties and variables
-(usually following clean SOME_VAR_<CONFIG> order conventions), such as
-CMAKE_C_FLAGS_<CONFIG>, specified as uppercase:
-CMAKE_C_FLAGS_[DEBUG|RELEASE|RELWITHDEBINFO|MINSIZEREL].  For example,
-in a build tree configured to build type Debug, CMake will see to
-having CMAKE_C_FLAGS_DEBUG settings get added to the CMAKE_C_FLAGS
-settings.  See also CMAKE_CONFIGURATION_TYPES.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_BUILD_WITH_INSTALL_RPATH.rst b/share/cmake-3.2/Help/variable/CMAKE_BUILD_WITH_INSTALL_RPATH.rst
deleted file mode 100644
index 6875da6..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_BUILD_WITH_INSTALL_RPATH.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_BUILD_WITH_INSTALL_RPATH
-------------------------------
-
-Use the install path for the RPATH
-
-Normally CMake uses the build tree for the RPATH when building
-executables etc on systems that use RPATH.  When the software is
-installed the executables etc are relinked by CMake to have the
-install RPATH.  If this variable is set to true then the software is
-always built with the install path for the RPATH and does not need to
-be relinked when installed.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CACHEFILE_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_CACHEFILE_DIR.rst
deleted file mode 100644
index 78c7d93..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CACHEFILE_DIR.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_CACHEFILE_DIR
--------------------
-
-The directory with the CMakeCache.txt file.
-
-This is the full path to the directory that has the CMakeCache.txt
-file in it.  This is the same as CMAKE_BINARY_DIR.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CACHE_MAJOR_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_CACHE_MAJOR_VERSION.rst
deleted file mode 100644
index e6887d9..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CACHE_MAJOR_VERSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_CACHE_MAJOR_VERSION
--------------------------
-
-Major version of CMake used to create the CMakeCache.txt file
-
-This stores the major version of CMake used to write a CMake cache
-file.  It is only different when a different version of CMake is run
-on a previously created cache file.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CACHE_MINOR_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_CACHE_MINOR_VERSION.rst
deleted file mode 100644
index 799f0a9..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CACHE_MINOR_VERSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_CACHE_MINOR_VERSION
--------------------------
-
-Minor version of CMake used to create the CMakeCache.txt file
-
-This stores the minor version of CMake used to write a CMake cache
-file.  It is only different when a different version of CMake is run
-on a previously created cache file.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CACHE_PATCH_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_CACHE_PATCH_VERSION.rst
deleted file mode 100644
index e67d544..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CACHE_PATCH_VERSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_CACHE_PATCH_VERSION
--------------------------
-
-Patch version of CMake used to create the CMakeCache.txt file
-
-This stores the patch version of CMake used to write a CMake cache
-file.  It is only different when a different version of CMake is run
-on a previously created cache file.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CFG_INTDIR.rst b/share/cmake-3.2/Help/variable/CMAKE_CFG_INTDIR.rst
deleted file mode 100644
index 20435e5..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CFG_INTDIR.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-CMAKE_CFG_INTDIR
-----------------
-
-Build-time reference to per-configuration output subdirectory.
-
-For native build systems supporting multiple configurations in the
-build tree (such as Visual Studio and Xcode), the value is a reference
-to a build-time variable specifying the name of the per-configuration
-output subdirectory.  On Makefile generators this evaluates to "."
-because there is only one configuration in a build tree.  Example
-values:
-
-::
-
-  $(IntDir)        = Visual Studio 6
-  $(OutDir)        = Visual Studio 7, 8, 9
-  $(Configuration) = Visual Studio 10
-  $(CONFIGURATION) = Xcode
-  .                = Make-based tools
-
-Since these values are evaluated by the native build system, this
-variable is suitable only for use in command lines that will be
-evaluated at build time.  Example of intended usage:
-
-::
-
-  add_executable(mytool mytool.c)
-  add_custom_command(
-    OUTPUT out.txt
-    COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool
-            ${CMAKE_CURRENT_SOURCE_DIR}/in.txt out.txt
-    DEPENDS mytool in.txt
-    )
-  add_custom_target(drive ALL DEPENDS out.txt)
-
-Note that CMAKE_CFG_INTDIR is no longer necessary for this purpose but
-has been left for compatibility with existing projects.  Instead
-add_custom_command() recognizes executable target names in its COMMAND
-option, so "${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool"
-can be replaced by just "mytool".
-
-This variable is read-only.  Setting it is undefined behavior.  In
-multi-configuration build systems the value of this variable is passed
-as the value of preprocessor symbol "CMAKE_INTDIR" to the compilation
-of all source files.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CL_64.rst b/share/cmake-3.2/Help/variable/CMAKE_CL_64.rst
deleted file mode 100644
index 5096829..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CL_64.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_CL_64
------------
-
-Using the 64 bit compiler from Microsoft
-
-Set to true when using the 64 bit cl compiler from Microsoft.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_COLOR_MAKEFILE.rst b/share/cmake-3.2/Help/variable/CMAKE_COLOR_MAKEFILE.rst
deleted file mode 100644
index 170baf3..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_COLOR_MAKEFILE.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_COLOR_MAKEFILE
---------------------
-
-Enables color output when using the Makefile generator.
-
-When enabled, the generated Makefiles will produce colored output.
-Default is ON.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_COMMAND.rst b/share/cmake-3.2/Help/variable/CMAKE_COMMAND.rst
deleted file mode 100644
index f4e5f1e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_COMMAND.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_COMMAND
--------------
-
-The full path to the cmake executable.
-
-This is the full path to the CMake executable cmake which is useful
-from custom commands that want to use the cmake -E option for portable
-system commands.  (e.g.  /usr/local/bin/cmake
diff --git a/share/cmake-3.2/Help/variable/CMAKE_COMPILER_IS_GNULANG.rst b/share/cmake-3.2/Help/variable/CMAKE_COMPILER_IS_GNULANG.rst
deleted file mode 100644
index bc5652f..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_COMPILER_IS_GNULANG.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMAKE_COMPILER_IS_GNU<LANG>
----------------------------
-
-True if the compiler is GNU.
-
-If the selected <LANG> compiler is the GNU compiler then this is TRUE,
-if not it is FALSE.  Unlike the other per-language variables, this
-uses the GNU syntax for identifying languages instead of the CMake
-syntax.  Recognized values of the <LANG> suffix are:
-
-::
-
-  CC = C compiler
-  CXX = C++ compiler
-  G77 = Fortran compiler
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CONFIGURATION_TYPES.rst b/share/cmake-3.2/Help/variable/CMAKE_CONFIGURATION_TYPES.rst
deleted file mode 100644
index 986b969..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CONFIGURATION_TYPES.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_CONFIGURATION_TYPES
--------------------------
-
-Specifies the available build types on multi-config generators.
-
-This specifies what build types (configurations) will be available
-such as Debug, Release, RelWithDebInfo etc.  This has reasonable
-defaults on most platforms, but can be extended to provide other build
-types.  See also CMAKE_BUILD_TYPE for details of managing
-configuration data, and CMAKE_CFG_INTDIR.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CONFIG_POSTFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_CONFIG_POSTFIX.rst
deleted file mode 100644
index af38bed..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CONFIG_POSTFIX.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<CONFIG>_POSTFIX
-----------------------
-
-Default filename postfix for libraries under configuration <CONFIG>.
-
-When a non-executable target is created its <CONFIG>_POSTFIX target
-property is initialized with the value of this variable if it is set.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CTEST_COMMAND.rst b/share/cmake-3.2/Help/variable/CMAKE_CTEST_COMMAND.rst
deleted file mode 100644
index d5dd2c3..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CTEST_COMMAND.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_CTEST_COMMAND
--------------------
-
-Full path to ctest command installed with cmake.
-
-This is the full path to the CTest executable ctest which is useful
-from custom commands that want to use the cmake -E option for portable
-system commands.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_BINARY_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_CURRENT_BINARY_DIR.rst
deleted file mode 100644
index fb55a11..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_BINARY_DIR.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_CURRENT_BINARY_DIR
-------------------------
-
-The path to the binary directory currently being processed.
-
-This the full path to the build directory that is currently being
-processed by cmake.  Each directory added by add_subdirectory will
-create a binary directory in the build tree, and as it is being
-processed this variable will be set.  For in-source builds this is the
-current source directory being processed.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_DIR.rst
deleted file mode 100644
index b816821..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_DIR.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMAKE_CURRENT_LIST_DIR
-----------------------
-
-Full directory of the listfile currently being processed.
-
-As CMake processes the listfiles in your project this variable will
-always be set to the directory where the listfile which is currently
-being processed (CMAKE_CURRENT_LIST_FILE) is located.  The value has
-dynamic scope.  When CMake starts processing commands in a source file
-it sets this variable to the directory where this file is located.
-When CMake finishes processing commands from the file it restores the
-previous value.  Therefore the value of the variable inside a macro or
-function is the directory of the file invoking the bottom-most entry
-on the call stack, not the directory of the file containing the macro
-or function definition.
-
-See also CMAKE_CURRENT_LIST_FILE.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_FILE.rst b/share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_FILE.rst
deleted file mode 100644
index 910d7b4..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_FILE.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMAKE_CURRENT_LIST_FILE
------------------------
-
-Full path to the listfile currently being processed.
-
-As CMake processes the listfiles in your project this variable will
-always be set to the one currently being processed.  The value has
-dynamic scope.  When CMake starts processing commands in a source file
-it sets this variable to the location of the file.  When CMake
-finishes processing commands from the file it restores the previous
-value.  Therefore the value of the variable inside a macro or function
-is the file invoking the bottom-most entry on the call stack, not the
-file containing the macro or function definition.
-
-See also CMAKE_PARENT_LIST_FILE.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_SOURCE_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_CURRENT_SOURCE_DIR.rst
deleted file mode 100644
index db063a4..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_SOURCE_DIR.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_CURRENT_SOURCE_DIR
-------------------------
-
-The path to the source directory currently being processed.
-
-This the full path to the source directory that is currently being
-processed by cmake.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CXX_COMPILE_FEATURES.rst b/share/cmake-3.2/Help/variable/CMAKE_CXX_COMPILE_FEATURES.rst
deleted file mode 100644
index 460c78c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CXX_COMPILE_FEATURES.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_CXX_COMPILE_FEATURES
---------------------------
-
-List of features known to the C++ compiler
-
-These features are known to be available for use with the C++ compiler. This
-list is a subset of the features listed in the :prop_gbl:`CMAKE_CXX_KNOWN_FEATURES`
-global property.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CXX_EXTENSIONS.rst b/share/cmake-3.2/Help/variable/CMAKE_CXX_EXTENSIONS.rst
deleted file mode 100644
index 6448371..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CXX_EXTENSIONS.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_CXX_EXTENSIONS
---------------------
-
-Default value for ``CXX_EXTENSIONS`` property of targets.
-
-This variable is used to initialize the :prop_tgt:`CXX_EXTENSIONS`
-property on all targets.  See that target property for additional
-information.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CXX_STANDARD.rst b/share/cmake-3.2/Help/variable/CMAKE_CXX_STANDARD.rst
deleted file mode 100644
index 963a42a..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CXX_STANDARD.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_CXX_STANDARD
-------------------
-
-Default value for ``CXX_STANDARD`` property of targets.
-
-This variable is used to initialize the :prop_tgt:`CXX_STANDARD`
-property on all targets.  See that target property for additional
-information.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CXX_STANDARD_REQUIRED.rst b/share/cmake-3.2/Help/variable/CMAKE_CXX_STANDARD_REQUIRED.rst
deleted file mode 100644
index f7750fa..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_CXX_STANDARD_REQUIRED.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_CXX_STANDARD_REQUIRED
----------------------------
-
-Default value for ``CXX_STANDARD_REQUIRED`` property of targets.
-
-This variable is used to initialize the :prop_tgt:`CXX_STANDARD_REQUIRED`
-property on all targets.  See that target property for additional
-information.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_C_COMPILE_FEATURES.rst b/share/cmake-3.2/Help/variable/CMAKE_C_COMPILE_FEATURES.rst
deleted file mode 100644
index 1106246..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_C_COMPILE_FEATURES.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_C_COMPILE_FEATURES
-------------------------
-
-List of features known to the C compiler
-
-These features are known to be available for use with the C compiler. This
-list is a subset of the features listed in the :prop_gbl:`CMAKE_C_KNOWN_FEATURES`
-global property.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_C_EXTENSIONS.rst b/share/cmake-3.2/Help/variable/CMAKE_C_EXTENSIONS.rst
deleted file mode 100644
index 5e935fc..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_C_EXTENSIONS.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_C_EXTENSIONS
-------------------
-
-Default value for ``C_EXTENSIONS`` property of targets.
-
-This variable is used to initialize the :prop_tgt:`C_EXTENSIONS`
-property on all targets.  See that target property for additional
-information.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_C_STANDARD.rst b/share/cmake-3.2/Help/variable/CMAKE_C_STANDARD.rst
deleted file mode 100644
index 3098ce5..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_C_STANDARD.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_C_STANDARD
-----------------
-
-Default value for ``C_STANDARD`` property of targets.
-
-This variable is used to initialize the :prop_tgt:`C_STANDARD`
-property on all targets.  See that target property for additional
-information.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_C_STANDARD_REQUIRED.rst b/share/cmake-3.2/Help/variable/CMAKE_C_STANDARD_REQUIRED.rst
deleted file mode 100644
index c24eea4..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_C_STANDARD_REQUIRED.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_C_STANDARD_REQUIRED
--------------------------
-
-Default value for ``C_STANDARD_REQUIRED`` property of targets.
-
-This variable is used to initialize the :prop_tgt:`C_STANDARD_REQUIRED`
-property on all targets.  See that target property for additional
-information.
-
-See the :manual:`cmake-compile-features(7)` manual for information on
-compile features.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_DEBUG_POSTFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_DEBUG_POSTFIX.rst
deleted file mode 100644
index fde24b2..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_DEBUG_POSTFIX.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_DEBUG_POSTFIX
--------------------
-
-See variable CMAKE_<CONFIG>_POSTFIX.
-
-This variable is a special case of the more-general
-CMAKE_<CONFIG>_POSTFIX variable for the DEBUG configuration.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_DEBUG_TARGET_PROPERTIES.rst b/share/cmake-3.2/Help/variable/CMAKE_DEBUG_TARGET_PROPERTIES.rst
deleted file mode 100644
index e200b86..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_DEBUG_TARGET_PROPERTIES.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-CMAKE_DEBUG_TARGET_PROPERTIES
------------------------------
-
-Enables tracing output for target properties.
-
-This variable can be populated with a list of properties to generate
-debug output for when evaluating target properties.  Currently it can
-only be used when evaluating the :prop_tgt:`INCLUDE_DIRECTORIES`,
-:prop_tgt:`COMPILE_DEFINITIONS`, :prop_tgt:`COMPILE_OPTIONS`,
-:prop_tgt:`AUTOUIC_OPTIONS`, :prop_tgt:`SOURCES`, :prop_tgt:`COMPILE_FEATURES`,
-:prop_tgt:`POSITION_INDEPENDENT_CODE` target properties and any other property
-listed in :prop_tgt:`COMPATIBLE_INTERFACE_STRING` and other ``COMPATIBLE_INTERFACE_``
-properties.  It outputs an origin for each entry in the target property.
-Default is unset.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName.rst b/share/cmake-3.2/Help/variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName.rst
deleted file mode 100644
index bcb277c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMAKE_DISABLE_FIND_PACKAGE_<PackageName>
-----------------------------------------
-
-Variable for disabling find_package() calls.
-
-Every non-REQUIRED find_package() call in a project can be disabled by
-setting the variable CMAKE_DISABLE_FIND_PACKAGE_<PackageName> to TRUE.
-This can be used to build a project without an optional package,
-although that package is installed.
-
-This switch should be used during the initial CMake run.  Otherwise if
-the package has already been found in a previous CMake run, the
-variables which have been stored in the cache will still be there.  In
-that case it is recommended to remove the cache variables for this
-package from the cache using the cache editor or cmake -U
diff --git a/share/cmake-3.2/Help/variable/CMAKE_DL_LIBS.rst b/share/cmake-3.2/Help/variable/CMAKE_DL_LIBS.rst
deleted file mode 100644
index cae4565..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_DL_LIBS.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_DL_LIBS
--------------
-
-Name of library containing dlopen and dlcose.
-
-The name of the library that has dlopen and dlclose in it, usually
--ldl on most UNIX machines.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_EDIT_COMMAND.rst b/share/cmake-3.2/Help/variable/CMAKE_EDIT_COMMAND.rst
deleted file mode 100644
index 562aa0b..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_EDIT_COMMAND.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_EDIT_COMMAND
-------------------
-
-Full path to cmake-gui or ccmake.  Defined only for Makefile generators
-when not using an "extra" generator for an IDE.
-
-This is the full path to the CMake executable that can graphically
-edit the cache.  For example, cmake-gui or ccmake.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ERROR_DEPRECATED.rst b/share/cmake-3.2/Help/variable/CMAKE_ERROR_DEPRECATED.rst
deleted file mode 100644
index 43ab282..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_ERROR_DEPRECATED.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_ERROR_DEPRECATED
-----------------------
-
-Whether to issue deprecation errors for macros and functions.
-
-If TRUE, this can be used by macros and functions to issue fatal
-errors when deprecated macros or functions are used.  This variable is
-FALSE by default.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.2/Help/variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
deleted file mode 100644
index 651d68d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
--------------------------------------------
-
-Ask cmake_install.cmake script to error out as soon as a file with absolute INSTALL DESTINATION is encountered.
-
-The fatal error is emitted before the installation of the offending
-file takes place.  This variable is used by CMake-generated
-cmake_install.cmake scripts.  If one sets this variable to ON while
-running the script, it may get fatal error messages from the script.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_EXECUTABLE_SUFFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_EXECUTABLE_SUFFIX.rst
deleted file mode 100644
index 45c313c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_EXECUTABLE_SUFFIX.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_EXECUTABLE_SUFFIX
------------------------
-
-The suffix for executables on this platform.
-
-The suffix to use for the end of an executable filename if any, .exe
-on Windows.
-
-CMAKE_EXECUTABLE_SUFFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_EXE_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.2/Help/variable/CMAKE_EXE_LINKER_FLAGS_CONFIG.rst
deleted file mode 100644
index dcaf300..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_EXE_LINKER_FLAGS_CONFIG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_EXE_LINKER_FLAGS_<CONFIG>
--------------------------------
-
-Flags to be used when linking an executable.
-
-Same as CMAKE_C_FLAGS_* but used by the linker when creating
-executables.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_EXTRA_GENERATOR.rst b/share/cmake-3.2/Help/variable/CMAKE_EXTRA_GENERATOR.rst
deleted file mode 100644
index 71aec92..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_EXTRA_GENERATOR.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_EXTRA_GENERATOR
----------------------
-
-The extra generator used to build the project.
-
-When using the Eclipse, CodeBlocks or KDevelop generators, CMake
-generates Makefiles (CMAKE_GENERATOR) and additionally project files
-for the respective IDE.  This IDE project file generator is stored in
-CMAKE_EXTRA_GENERATOR (e.g.  "Eclipse CDT4").
diff --git a/share/cmake-3.2/Help/variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES.rst b/share/cmake-3.2/Help/variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES.rst
deleted file mode 100644
index 6187a7a..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES
------------------------------------
-
-Additional suffixes for shared libraries.
-
-Extensions for shared libraries other than that specified by
-CMAKE_SHARED_LIBRARY_SUFFIX, if any.  CMake uses this to recognize
-external shared library files during analysis of libraries linked by a
-target.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_LIBRARY_PREFIXES.rst b/share/cmake-3.2/Help/variable/CMAKE_FIND_LIBRARY_PREFIXES.rst
deleted file mode 100644
index 1a9e7ce..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_FIND_LIBRARY_PREFIXES.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_FIND_LIBRARY_PREFIXES
----------------------------
-
-Prefixes to prepend when looking for libraries.
-
-This specifies what prefixes to add to library names when the
-find_library command looks for libraries.  On UNIX systems this is
-typically lib, meaning that when trying to find the foo library it
-will look for libfoo.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_LIBRARY_SUFFIXES.rst b/share/cmake-3.2/Help/variable/CMAKE_FIND_LIBRARY_SUFFIXES.rst
deleted file mode 100644
index c533909..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_FIND_LIBRARY_SUFFIXES.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_FIND_LIBRARY_SUFFIXES
----------------------------
-
-Suffixes to append when looking for libraries.
-
-This specifies what suffixes to add to library names when the
-find_library command looks for libraries.  On Windows systems this is
-typically .lib and .dll, meaning that when trying to find the foo
-library it will look for foo.dll etc.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_NO_INSTALL_PREFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_FIND_NO_INSTALL_PREFIX.rst
deleted file mode 100644
index 70d920b..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_FIND_NO_INSTALL_PREFIX.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMAKE_FIND_NO_INSTALL_PREFIX
-----------------------------
-
-Ignore the :variable:`CMAKE_INSTALL_PREFIX` when searching for assets.
-
-CMake adds the :variable:`CMAKE_INSTALL_PREFIX` and the
-:variable:`CMAKE_STAGING_PREFIX` variable to the
-:variable:`CMAKE_SYSTEM_PREFIX_PATH` by default. This variable may be set
-on the command line to control that behavior.
-
-Set :variable:`CMAKE_FIND_NO_INSTALL_PREFIX` to TRUE to tell find_package not
-to search in the :variable:`CMAKE_INSTALL_PREFIX` or
-:variable:`CMAKE_STAGING_PREFIX` by default.  Note that the
-prefix may still be searched for other reasons, such as being the same prefix
-as the CMake installation, or for being a built-in system prefix.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE.rst b/share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE.rst
deleted file mode 100644
index 5d7599c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMAKE_FIND_PACKAGE_WARN_NO_MODULE
----------------------------------
-
-Tell find_package to warn if called without an explicit mode.
-
-If find_package is called without an explicit mode option (MODULE,
-CONFIG or NO_MODULE) and no Find<pkg>.cmake module is in
-CMAKE_MODULE_PATH then CMake implicitly assumes that the caller
-intends to search for a package configuration file.  If no package
-configuration file is found then the wording of the failure message
-must account for both the case that the package is really missing and
-the case that the project has a bug and failed to provide the intended
-Find module.  If instead the caller specifies an explicit mode option
-then the failure message can be more specific.
-
-Set CMAKE_FIND_PACKAGE_WARN_NO_MODULE to TRUE to tell find_package to
-warn when it implicitly assumes Config mode.  This helps developers
-enforce use of an explicit mode in all calls to find_package within a
-project.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH.rst
deleted file mode 100644
index 67948f7..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_FIND_ROOT_PATH
---------------------
-
-List of root paths to search on the filesystem.
-
-This variable is most useful when cross-compiling. CMake uses the paths in
-this list as alternative roots to find filesystem items with :command:`find_package`,
-:command:`find_library` etc.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FRAMEWORK_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_FRAMEWORK_PATH.rst
deleted file mode 100644
index f1bc75e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_FRAMEWORK_PATH.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_FRAMEWORK_PATH
---------------------
-
-Search path for OS X frameworks used by the :command:`find_library`,
-:command:`find_package`, :command:`find_path`, and :command:`find_file`
-commands.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_Fortran_FORMAT.rst b/share/cmake-3.2/Help/variable/CMAKE_Fortran_FORMAT.rst
deleted file mode 100644
index c0e971c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_Fortran_FORMAT.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_Fortran_FORMAT
---------------------
-
-Set to FIXED or FREE to indicate the Fortran source layout.
-
-This variable is used to initialize the Fortran_FORMAT property on all
-the targets.  See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODDIR_DEFAULT.rst b/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODDIR_DEFAULT.rst
deleted file mode 100644
index a8dfcdf..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODDIR_DEFAULT.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_Fortran_MODDIR_DEFAULT
-----------------------------
-
-Fortran default module output directory.
-
-Most Fortran compilers write .mod files to the current working
-directory.  For those that do not, this is set to "." and used when
-the Fortran_MODULE_DIRECTORY target property is not set.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODDIR_FLAG.rst b/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODDIR_FLAG.rst
deleted file mode 100644
index 4b32df3..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODDIR_FLAG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_Fortran_MODDIR_FLAG
--------------------------
-
-Fortran flag for module output directory.
-
-This stores the flag needed to pass the value of the
-Fortran_MODULE_DIRECTORY target property to the compiler.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODOUT_FLAG.rst b/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODOUT_FLAG.rst
deleted file mode 100644
index a232213..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODOUT_FLAG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_Fortran_MODOUT_FLAG
--------------------------
-
-Fortran flag to enable module output.
-
-Most Fortran compilers write .mod files out by default.  For others,
-this stores the flag needed to enable module output.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODULE_DIRECTORY.rst b/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODULE_DIRECTORY.rst
deleted file mode 100644
index b1d49d8..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_Fortran_MODULE_DIRECTORY.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_Fortran_MODULE_DIRECTORY
-------------------------------
-
-Fortran module output directory.
-
-This variable is used to initialize the Fortran_MODULE_DIRECTORY
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_GENERATOR.rst b/share/cmake-3.2/Help/variable/CMAKE_GENERATOR.rst
deleted file mode 100644
index a4e70a5..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_GENERATOR.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_GENERATOR
----------------
-
-The generator used to build the project.
-
-The name of the generator that is being used to generate the build
-files.  (e.g.  "Unix Makefiles", "Visual Studio 6", etc.)
diff --git a/share/cmake-3.2/Help/variable/CMAKE_GENERATOR_PLATFORM.rst b/share/cmake-3.2/Help/variable/CMAKE_GENERATOR_PLATFORM.rst
deleted file mode 100644
index 5809b6a..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_GENERATOR_PLATFORM.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMAKE_GENERATOR_PLATFORM
-------------------------
-
-Generator-specific target platform name specified by user.
-
-Some CMake generators support a target platform name to be given
-to the native build system to choose a compiler toolchain.
-If the user specifies a toolset name (e.g. via the cmake -A option)
-the value will be available in this variable.
-
-The value of this variable should never be modified by project code.
-A toolchain file specified by the :variable:`CMAKE_TOOLCHAIN_FILE`
-variable may initialize ``CMAKE_GENERATOR_PLATFORM``.  Once a given
-build tree has been initialized with a particular value for this
-variable, changing the value has undefined behavior.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_GENERATOR_TOOLSET.rst b/share/cmake-3.2/Help/variable/CMAKE_GENERATOR_TOOLSET.rst
deleted file mode 100644
index 9ccc8b3..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_GENERATOR_TOOLSET.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMAKE_GENERATOR_TOOLSET
------------------------
-
-Native build system toolset name specified by user.
-
-Some CMake generators support a toolset name to be given to the native
-build system to choose a compiler.  If the user specifies a toolset
-name (e.g.  via the cmake -T option) the value will be available in
-this variable.
-
-The value of this variable should never be modified by project code.
-A toolchain file specified by the :variable:`CMAKE_TOOLCHAIN_FILE`
-variable may initialize ``CMAKE_GENERATOR_TOOLSET``.  Once a given
-build tree has been initialized with a particular value for this
-variable, changing the value has undefined behavior.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_GNUtoMS.rst b/share/cmake-3.2/Help/variable/CMAKE_GNUtoMS.rst
deleted file mode 100644
index e253f59..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_GNUtoMS.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_GNUtoMS
--------------
-
-Convert GNU import libraries (.dll.a) to MS format (.lib).
-
-This variable is used to initialize the GNUtoMS property on targets
-when they are created.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOST_APPLE.rst b/share/cmake-3.2/Help/variable/CMAKE_HOST_APPLE.rst
deleted file mode 100644
index d4b8483..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_HOST_APPLE.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_HOST_APPLE
-----------------
-
-True for Apple OS X operating systems.
-
-Set to true when the host system is Apple OS X.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_NAME.rst b/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_NAME.rst
deleted file mode 100644
index a221de9..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_NAME.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_HOST_SYSTEM_NAME
-----------------------
-
-Name of the OS CMake is running on.
-
-On systems that have the uname command, this variable is set to the
-output of uname -s.  ``Linux``, ``Windows``, and ``Darwin`` for Mac OS X
-are the values found on the big three operating systems.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_PROCESSOR.rst b/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_PROCESSOR.rst
deleted file mode 100644
index 790565a..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_PROCESSOR.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_HOST_SYSTEM_PROCESSOR
----------------------------
-
-The name of the CPU CMake is running on.
-
-On systems that support uname, this variable is set to the output of
-uname -p, on windows it is set to the value of the environment variable
-``PROCESSOR_ARCHITECTURE``.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_VERSION.rst
deleted file mode 100644
index e7e0052..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM_VERSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_HOST_SYSTEM_VERSION
--------------------------
-
-The OS version CMake is running on.
-
-A numeric version string for the system.  On systems that support
-uname, this variable is set to the output of uname -r. On other
-systems this is set to major-minor version numbers.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOST_UNIX.rst b/share/cmake-3.2/Help/variable/CMAKE_HOST_UNIX.rst
deleted file mode 100644
index bbefba7..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_HOST_UNIX.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_HOST_UNIX
----------------
-
-True for UNIX and UNIX like operating systems.
-
-Set to true when the host system is UNIX or UNIX like (i.e.  APPLE and
-CYGWIN).
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOST_WIN32.rst b/share/cmake-3.2/Help/variable/CMAKE_HOST_WIN32.rst
deleted file mode 100644
index 92ee456..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_HOST_WIN32.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_HOST_WIN32
-----------------
-
-True on windows systems, including win64.
-
-Set to true when the host system is Windows and on Cygwin.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_IGNORE_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_IGNORE_PATH.rst
deleted file mode 100644
index a818f74..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_IGNORE_PATH.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMAKE_IGNORE_PATH
------------------
-
-Path to be ignored by FIND_XXX() commands.
-
-Specifies directories to be ignored by searches in FIND_XXX()
-commands.  This is useful in cross-compiled environments where some
-system directories contain incompatible but possibly linkable
-libraries.  For example, on cross-compiled cluster environments, this
-allows a user to ignore directories containing libraries meant for the
-front-end machine that modules like FindX11 (and others) would
-normally search.  By default this is empty; it is intended to be set
-by the project.  Note that CMAKE_IGNORE_PATH takes a list of directory
-names, NOT a list of prefixes.  If you want to ignore paths under
-prefixes (bin, include, lib, etc.), you'll need to specify them
-explicitly.  See also CMAKE_PREFIX_PATH, CMAKE_LIBRARY_PATH,
-CMAKE_INCLUDE_PATH, CMAKE_PROGRAM_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_IMPORT_LIBRARY_PREFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_IMPORT_LIBRARY_PREFIX.rst
deleted file mode 100644
index 1d16a37..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_IMPORT_LIBRARY_PREFIX.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_IMPORT_LIBRARY_PREFIX
----------------------------
-
-The prefix for import libraries that you link to.
-
-The prefix to use for the name of an import library if used on this
-platform.
-
-CMAKE_IMPORT_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_IMPORT_LIBRARY_SUFFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_IMPORT_LIBRARY_SUFFIX.rst
deleted file mode 100644
index c16825e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_IMPORT_LIBRARY_SUFFIX.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_IMPORT_LIBRARY_SUFFIX
----------------------------
-
-The suffix for import libraries that you link to.
-
-The suffix to use for the end of an import library filename if used on
-this platform.
-
-CMAKE_IMPORT_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_CURRENT_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_CURRENT_DIR.rst
deleted file mode 100644
index 79f3952..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_CURRENT_DIR.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMAKE_INCLUDE_CURRENT_DIR
--------------------------
-
-Automatically add the current source- and build directories to the include path.
-
-If this variable is enabled, CMake automatically adds in each
-directory ${CMAKE_CURRENT_SOURCE_DIR} and ${CMAKE_CURRENT_BINARY_DIR}
-to the include path for this directory.  These additional include
-directories do not propagate down to subdirectories.  This is useful
-mainly for out-of-source builds, where files generated into the build
-tree are included by files located in the source tree.
-
-By default CMAKE_INCLUDE_CURRENT_DIR is OFF.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE.rst b/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE.rst
deleted file mode 100644
index 948db50..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE
---------------------------------------
-
-Automatically add the current source- and build directories to the INTERFACE_INCLUDE_DIRECTORIES.
-
-If this variable is enabled, CMake automatically adds for each shared
-library target, static library target, module target and executable
-target, ${CMAKE_CURRENT_SOURCE_DIR} and ${CMAKE_CURRENT_BINARY_DIR} to
-the INTERFACE_INCLUDE_DIRECTORIES.By default
-CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE is OFF.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE.rst b/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE.rst
deleted file mode 100644
index 3c1fbcf..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_INCLUDE_DIRECTORIES_BEFORE
---------------------------------
-
-Whether to append or prepend directories by default in :command:`include_directories`.
-
-This variable affects the default behavior of the :command:`include_directories`
-command. Setting this variable to 'ON' is equivalent to using the BEFORE option
-in all uses of that command.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE.rst b/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE.rst
deleted file mode 100644
index cbd04d7..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE
-----------------------------------------
-
-Whether to force prepending of project include directories.
-
-This variable affects the order of include directories generated in compiler
-command lines.  If set to 'ON', it causes the :variable:`CMAKE_SOURCE_DIR` and
-the :variable:`CMAKE_BINARY_DIR` to appear first.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_PATH.rst
deleted file mode 100644
index 360b403..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INCLUDE_PATH.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_INCLUDE_PATH
-------------------
-
-Path used for searching by FIND_FILE() and FIND_PATH().
-
-Specifies a path which will be used both by FIND_FILE() and
-FIND_PATH().  Both commands will check each of the contained
-directories for the existence of the file which is currently searched.
-By default it is empty, it is intended to be set by the project.  See
-also CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_PREFIX_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME.rst b/share/cmake-3.2/Help/variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME.rst
deleted file mode 100644
index 2ad0689..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_INSTALL_DEFAULT_COMPONENT_NAME
-------------------------------------
-
-Default component used in install() commands.
-
-If an install() command is used without the COMPONENT argument, these
-files will be grouped into a default component.  The name of this
-default install component will be taken from this variable.  It
-defaults to "Unspecified".
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_NAME_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_INSTALL_NAME_DIR.rst
deleted file mode 100644
index 540df6b..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_NAME_DIR.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_INSTALL_NAME_DIR
-----------------------
-
-Mac OS X directory name for installed targets.
-
-CMAKE_INSTALL_NAME_DIR is used to initialize the INSTALL_NAME_DIR
-property on all targets.  See that target property for more
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_PREFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_INSTALL_PREFIX.rst
deleted file mode 100644
index ee9b615..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_PREFIX.rst
+++ /dev/null
@@ -1,34 +0,0 @@
-CMAKE_INSTALL_PREFIX
---------------------
-
-Install directory used by install.
-
-If "make install" is invoked or INSTALL is built, this directory is
-prepended onto all install directories.  This variable defaults to
-/usr/local on UNIX and c:/Program Files on Windows.
-
-On UNIX one can use the DESTDIR mechanism in order to relocate the
-whole installation.  DESTDIR means DESTination DIRectory.  It is
-commonly used by makefile users in order to install software at
-non-default location.  It is usually invoked like this:
-
-::
-
- make DESTDIR=/home/john install
-
-which will install the concerned software using the installation
-prefix, e.g.  "/usr/local" prepended with the DESTDIR value which
-finally gives "/home/john/usr/local".
-
-WARNING: DESTDIR may not be used on Windows because installation
-prefix usually contains a drive letter like in "C:/Program Files"
-which cannot be prepended with some other prefix.
-
-The installation prefix is also added to CMAKE_SYSTEM_PREFIX_PATH so
-that find_package, find_program, find_library, find_path, and
-find_file will search the prefix for other software.
-
-.. note::
-
-  Use the :module:`GNUInstallDirs` module to provide GNU-style
-  options for the layout of directories within the installation.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_RPATH.rst b/share/cmake-3.2/Help/variable/CMAKE_INSTALL_RPATH.rst
deleted file mode 100644
index 0992d57..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_RPATH.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_INSTALL_RPATH
--------------------
-
-The rpath to use for installed targets.
-
-A semicolon-separated list specifying the rpath to use in installed
-targets (for platforms that support it).  This is used to initialize
-the target property INSTALL_RPATH for all targets.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH.rst
deleted file mode 100644
index 9277a3b..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_INSTALL_RPATH_USE_LINK_PATH
----------------------------------
-
-Add paths to linker search and installed rpath.
-
-CMAKE_INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true
-will append directories in the linker search path and outside the
-project to the INSTALL_RPATH.  This is used to initialize the target
-property INSTALL_RPATH_USE_LINK_PATH for all targets.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_APPEND.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_APPEND.rst
deleted file mode 100644
index 2c3abae..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_APPEND.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_<LANG>_ARCHIVE_APPEND
----------------------------
-
-Rule variable to append to a static archive.
-
-This is a rule variable that tells CMake how to append to a static
-archive.  It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
-some platforms in order to support large object counts.  See also
-CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_FINISH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_CREATE.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_CREATE.rst
deleted file mode 100644
index f93dd11..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_CREATE.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_<LANG>_ARCHIVE_CREATE
----------------------------
-
-Rule variable to create a new static archive.
-
-This is a rule variable that tells CMake how to create a static
-archive.  It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
-some platforms in order to support large object counts.  See also
-CMAKE_<LANG>_ARCHIVE_APPEND and CMAKE_<LANG>_ARCHIVE_FINISH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_FINISH.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_FINISH.rst
deleted file mode 100644
index fff4128..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_ARCHIVE_FINISH.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_<LANG>_ARCHIVE_FINISH
----------------------------
-
-Rule variable to finish an existing static archive.
-
-This is a rule variable that tells CMake how to finish a static
-archive.  It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
-some platforms in order to support large object counts.  See also
-CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_APPEND.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER.rst
deleted file mode 100644
index fffc347..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_COMPILER
----------------------
-
-The full path to the compiler for LANG.
-
-This is the command that will be used as the <LANG> compiler.  Once
-set, you can not change this variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN.rst
deleted file mode 100644
index 033998d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN
-----------------------------------------
-
-The external toolchain for cross-compiling, if supported.
-
-Some compiler toolchains do not ship their own auxilliary utilities such as
-archivers and linkers.  The compiler driver may support a command-line argument
-to specify the location of such tools.  CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN
-may be set to a path to a path to the external toolchain and will be passed
-to the compiler driver if supported.
-
-This variable may only be set in a toolchain file specified by
-the :variable:`CMAKE_TOOLCHAIN_FILE` variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_ID.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_ID.rst
deleted file mode 100644
index f554f4e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_ID.rst
+++ /dev/null
@@ -1,33 +0,0 @@
-CMAKE_<LANG>_COMPILER_ID
-------------------------
-
-Compiler identification string.
-
-A short string unique to the compiler vendor.  Possible values
-include:
-
-::
-
-  Absoft = Absoft Fortran (absoft.com)
-  ADSP = Analog VisualDSP++ (analog.com)
-  AppleClang = Apple Clang (apple.com)
-  Clang = LLVM Clang (clang.llvm.org)
-  Cray = Cray Compiler (cray.com)
-  Embarcadero, Borland = Embarcadero (embarcadero.com)
-  G95 = G95 Fortran (g95.org)
-  GNU = GNU Compiler Collection (gcc.gnu.org)
-  HP = Hewlett-Packard Compiler (hp.com)
-  Intel = Intel Compiler (intel.com)
-  MIPSpro = SGI MIPSpro (sgi.com)
-  MSVC = Microsoft Visual Studio (microsoft.com)
-  OpenWatcom = Open Watcom (openwatcom.org)
-  PGI = The Portland Group (pgroup.com)
-  PathScale = PathScale (pathscale.com)
-  SDCC = Small Device C Compiler (sdcc.sourceforge.net)
-  SunPro = Oracle Solaris Studio (oracle.com)
-  TI = Texas Instruments (ti.com)
-  TinyCC = Tiny C Compiler (tinycc.org)
-  XL, VisualAge, zOS = IBM XL (ibm.com)
-
-This variable is not guaranteed to be defined for all compilers or
-languages.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_LOADED.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_LOADED.rst
deleted file mode 100644
index 3b8e9aa..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_LOADED.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_COMPILER_LOADED
-----------------------------
-
-Defined to true if the language is enabled.
-
-When language <LANG> is enabled by project() or enable_language() this
-variable is defined to 1.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILE_OBJECT.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILE_OBJECT.rst
deleted file mode 100644
index f43ed6d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILE_OBJECT.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_COMPILE_OBJECT
----------------------------
-
-Rule variable to compile a single object file.
-
-This is a rule variable that tells CMake how to compile a single
-object file for the language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_SHARED_LIBRARY.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_SHARED_LIBRARY.rst
deleted file mode 100644
index adf1624..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_SHARED_LIBRARY.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_CREATE_SHARED_LIBRARY
-----------------------------------
-
-Rule variable to create a shared library.
-
-This is a rule variable that tells CMake how to create a shared
-library for the language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_SHARED_MODULE.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_SHARED_MODULE.rst
deleted file mode 100644
index 406b4da..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_SHARED_MODULE.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_CREATE_SHARED_MODULE
----------------------------------
-
-Rule variable to create a shared module.
-
-This is a rule variable that tells CMake how to create a shared
-library for the language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_STATIC_LIBRARY.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_STATIC_LIBRARY.rst
deleted file mode 100644
index 8114432..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_CREATE_STATIC_LIBRARY.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_CREATE_STATIC_LIBRARY
-----------------------------------
-
-Rule variable to create a static library.
-
-This is a rule variable that tells CMake how to create a static
-library for the language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS.rst
deleted file mode 100644
index 6aa0a3e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_<LANG>_FLAGS
-------------------
-
-Flags for all build types.
-
-<LANG> flags used regardless of the value of CMAKE_BUILD_TYPE.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_DEBUG.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_DEBUG.rst
deleted file mode 100644
index a727641..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_DEBUG.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_<LANG>_FLAGS_DEBUG
-------------------------
-
-Flags for Debug build type or configuration.
-
-<LANG> flags used when CMAKE_BUILD_TYPE is Debug.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_MINSIZEREL.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_MINSIZEREL.rst
deleted file mode 100644
index fbb8516..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_MINSIZEREL.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_FLAGS_MINSIZEREL
------------------------------
-
-Flags for MinSizeRel build type or configuration.
-
-<LANG> flags used when CMAKE_BUILD_TYPE is MinSizeRel.Short for
-minimum size release.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_RELEASE.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_RELEASE.rst
deleted file mode 100644
index 4b2c926..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_RELEASE.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_<LANG>_FLAGS_RELEASE
---------------------------
-
-Flags for Release build type or configuration.
-
-<LANG> flags used when CMAKE_BUILD_TYPE is Release
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO.rst
deleted file mode 100644
index 16bd4e9..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_FLAGS_RELWITHDEBINFO
----------------------------------
-
-Flags for RelWithDebInfo type or configuration.
-
-<LANG> flags used when CMAKE_BUILD_TYPE is RelWithDebInfo.  Short for
-Release With Debug Information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES.rst
deleted file mode 100644
index c60e18c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES
------------------------------------------
-
-Directories implicitly searched by the compiler for header files.
-
-CMake does not explicitly specify these directories on compiler
-command lines for language <LANG>.  This prevents system include
-directories from being treated as user include directories on some
-compilers.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES.rst
deleted file mode 100644
index 568950c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES
---------------------------------------
-
-Implicit linker search path detected for language <LANG>.
-
-Compilers typically pass directories containing language runtime
-libraries and default library search paths when they invoke a linker.
-These paths are implicit linker search directories for the compiler's
-language.  CMake automatically detects these directories for each
-language and reports the results in this variable.
-
-When a library in one of these directories is given by full path to
-target_link_libraries() CMake will generate the -l<name> form on link
-lines to ensure the linker searches its implicit directories for the
-library.  Note that some toolchains read implicit directories from an
-environment variable such as LIBRARY_PATH so keep its value consistent
-when operating in a given build tree.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES.rst
deleted file mode 100644
index 05e6ddb..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_<LANG>_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
-------------------------------------------------
-
-Implicit linker framework search path detected for language <LANG>.
-
-These paths are implicit linker framework search directories for the
-compiler's language.  CMake automatically detects these directories
-for each language and reports the results in this variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES.rst
deleted file mode 100644
index fddfed8..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES
-------------------------------------
-
-Implicit link libraries and flags detected for language <LANG>.
-
-Compilers typically pass language runtime library names and other
-flags when they invoke a linker.  These flags are implicit link
-options for the compiler's language.  CMake automatically detects
-these libraries and flags for each language and reports the results in
-this variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_LIBRARY_ARCHITECTURE.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_LIBRARY_ARCHITECTURE.rst
deleted file mode 100644
index 4f31494..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_LIBRARY_ARCHITECTURE.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_<LANG>_LIBRARY_ARCHITECTURE
----------------------------------
-
-Target architecture library directory name detected for <lang>.
-
-If the <lang> compiler passes to the linker an architecture-specific
-system library search directory such as <prefix>/lib/<arch> this
-variable contains the <arch> name if/as detected by CMake.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_LINKER_PREFERENCE.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_LINKER_PREFERENCE.rst
deleted file mode 100644
index af7ee60..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_LINKER_PREFERENCE.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_<LANG>_LINKER_PREFERENCE
-------------------------------
-
-Preference value for linker language selection.
-
-The "linker language" for executable, shared library, and module
-targets is the language whose compiler will invoke the linker.  The
-LINKER_LANGUAGE target property sets the language explicitly.
-Otherwise, the linker language is that whose linker preference value
-is highest among languages compiled and linked into the target.  See
-also the CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES.rst
deleted file mode 100644
index d513767..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES
------------------------------------------
-
-True if CMAKE_<LANG>_LINKER_PREFERENCE propagates across targets.
-
-This is used when CMake selects a linker language for a target.
-Languages compiled directly into the target are always considered.  A
-language compiled into static libraries linked by the target is
-considered if this variable is true.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_OUTPUT_EXTENSION.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_OUTPUT_EXTENSION.rst
deleted file mode 100644
index 22fac29..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_OUTPUT_EXTENSION.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_OUTPUT_EXTENSION
------------------------------
-
-Extension for the output of a compile for a single file.
-
-This is the extension for an object file for the given <LANG>.  For
-example .obj for C on Windows.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_SIMULATE_ID.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_SIMULATE_ID.rst
deleted file mode 100644
index 646c0db..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_SIMULATE_ID.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_<LANG>_SIMULATE_ID
-------------------------
-
-Identification string of "simulated" compiler.
-
-Some compilers simulate other compilers to serve as drop-in
-replacements.  When CMake detects such a compiler it sets this
-variable to what would have been the CMAKE_<LANG>_COMPILER_ID for the
-simulated compiler.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_SIMULATE_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_SIMULATE_VERSION.rst
deleted file mode 100644
index 982053d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_SIMULATE_VERSION.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_<LANG>_SIMULATE_VERSION
------------------------------
-
-Version string of "simulated" compiler.
-
-Some compilers simulate other compilers to serve as drop-in
-replacements.  When CMake detects such a compiler it sets this
-variable to what would have been the CMAKE_<LANG>_COMPILER_VERSION for
-the simulated compiler.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_SIZEOF_DATA_PTR.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_SIZEOF_DATA_PTR.rst
deleted file mode 100644
index c85b5e0..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_SIZEOF_DATA_PTR.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_<LANG>_SIZEOF_DATA_PTR
-----------------------------
-
-Size of pointer-to-data types for language <LANG>.
-
-This holds the size (in bytes) of pointer-to-data types in the target
-platform ABI.  It is defined for languages C and CXX (C++).
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_VISIBILITY_PRESET.rst b/share/cmake-3.2/Help/variable/CMAKE_LANG_VISIBILITY_PRESET.rst
deleted file mode 100644
index bef670f..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LANG_VISIBILITY_PRESET.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_<LANG>_VISIBILITY_PRESET
-------------------------------
-
-Default value for <LANG>_VISIBILITY_PRESET of targets.
-
-This variable is used to initialize the <LANG>_VISIBILITY_PRESET
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_ARCHITECTURE.rst b/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_ARCHITECTURE.rst
deleted file mode 100644
index c9a15f3..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_ARCHITECTURE.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_LIBRARY_ARCHITECTURE
---------------------------
-
-Target architecture library directory name, if detected.
-
-This is the value of CMAKE_<lang>_LIBRARY_ARCHITECTURE as detected for
-one of the enabled languages.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX.rst b/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX.rst
deleted file mode 100644
index 6c41269..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_LIBRARY_ARCHITECTURE_REGEX
---------------------------------
-
-Regex matching possible target architecture library directory names.
-
-This is used to detect CMAKE_<lang>_LIBRARY_ARCHITECTURE from the
-implicit linker search path by matching the <arch> name.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY.rst b/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY.rst
deleted file mode 100644
index 3bdd348..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_LIBRARY_OUTPUT_DIRECTORY
-------------------------------
-
-Where to put all the LIBRARY targets when built.
-
-This variable is used to initialize the LIBRARY_OUTPUT_DIRECTORY
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_PATH.rst
deleted file mode 100644
index e77dd34..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_PATH.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_LIBRARY_PATH
-------------------
-
-Path used for searching by FIND_LIBRARY().
-
-Specifies a path which will be used by FIND_LIBRARY().  FIND_LIBRARY()
-will check each of the contained directories for the existence of the
-library which is currently searched.  By default it is empty, it is
-intended to be set by the project.  See also
-CMAKE_SYSTEM_LIBRARY_PATH, CMAKE_PREFIX_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_PATH_FLAG.rst b/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_PATH_FLAG.rst
deleted file mode 100644
index ede39e9..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LIBRARY_PATH_FLAG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_LIBRARY_PATH_FLAG
------------------------
-
-The flag to be used to add a library search path to a compiler.
-
-The flag will be used to specify a library directory to the compiler.
-On most compilers this is "-L".
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LINK_DEF_FILE_FLAG.rst b/share/cmake-3.2/Help/variable/CMAKE_LINK_DEF_FILE_FLAG.rst
deleted file mode 100644
index 382447c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LINK_DEF_FILE_FLAG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_LINK_DEF_FILE_FLAG
-------------------------
-
-Linker flag to be used to specify a .def file for dll creation.
-
-The flag will be used to add a .def file when creating a dll on
-Windows; this is only defined on Windows.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LINK_DEPENDS_NO_SHARED.rst b/share/cmake-3.2/Help/variable/CMAKE_LINK_DEPENDS_NO_SHARED.rst
deleted file mode 100644
index 6ae7df6..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LINK_DEPENDS_NO_SHARED.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_LINK_DEPENDS_NO_SHARED
-----------------------------
-
-Whether to skip link dependencies on shared library files.
-
-This variable initializes the LINK_DEPENDS_NO_SHARED property on
-targets when they are created.  See that target property for
-additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LINK_INTERFACE_LIBRARIES.rst b/share/cmake-3.2/Help/variable/CMAKE_LINK_INTERFACE_LIBRARIES.rst
deleted file mode 100644
index efe6fd7..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LINK_INTERFACE_LIBRARIES.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_LINK_INTERFACE_LIBRARIES
-------------------------------
-
-Default value for LINK_INTERFACE_LIBRARIES of targets.
-
-This variable is used to initialize the LINK_INTERFACE_LIBRARIES
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_FLAG.rst b/share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_FLAG.rst
deleted file mode 100644
index c3e02d7..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_FLAG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_LINK_LIBRARY_FLAG
------------------------
-
-Flag to be used to link a library into an executable.
-
-The flag will be used to specify a library to link to an executable.
-On most compilers this is "-l".
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_SUFFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_SUFFIX.rst
deleted file mode 100644
index 390298d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_SUFFIX.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_LINK_LIBRARY_SUFFIX
--------------------------
-
-The suffix for libraries that you link to.
-
-The suffix to use for the end of a library filename, .lib on Windows.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MACOSX_BUNDLE.rst b/share/cmake-3.2/Help/variable/CMAKE_MACOSX_BUNDLE.rst
deleted file mode 100644
index e4768f3..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MACOSX_BUNDLE.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_MACOSX_BUNDLE
--------------------
-
-Default value for MACOSX_BUNDLE of targets.
-
-This variable is used to initialize the MACOSX_BUNDLE property on all
-the targets.  See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MACOSX_RPATH.rst b/share/cmake-3.2/Help/variable/CMAKE_MACOSX_RPATH.rst
deleted file mode 100644
index ac897c0..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MACOSX_RPATH.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_MACOSX_RPATH
--------------------
-
-Whether to use rpaths on Mac OS X.
-
-This variable is used to initialize the :prop_tgt:`MACOSX_RPATH` property on
-all targets.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MAKE_PROGRAM.rst b/share/cmake-3.2/Help/variable/CMAKE_MAKE_PROGRAM.rst
deleted file mode 100644
index f1d88a5..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MAKE_PROGRAM.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-CMAKE_MAKE_PROGRAM
-------------------
-
-Tool that can launch the native build system.
-The value may be the full path to an executable or just the tool
-name if it is expected to be in the ``PATH``.
-
-The tool selected depends on the :variable:`CMAKE_GENERATOR` used
-to configure the project:
-
-* The Makefile generators set this to ``make``, ``gmake``, or
-  a generator-specific tool (e.g. ``nmake`` for "NMake Makefiles").
-
-  These generators store ``CMAKE_MAKE_PROGRAM`` in the CMake cache
-  so that it may be edited by the user.
-
-* The Ninja generator sets this to ``ninja``.
-
-  This generator stores ``CMAKE_MAKE_PROGRAM`` in the CMake cache
-  so that it may be edited by the user.
-
-* The Xcode generator sets this to ``xcodebuild`` (or possibly an
-  otherwise undocumented ``cmakexbuild`` wrapper implementing some
-  workarounds).
-
-  This generator prefers to lookup the build tool at build time
-  rather than to store ``CMAKE_MAKE_PROGRAM`` in the CMake cache
-  ahead of time.  This is because ``xcodebuild`` is easy to find,
-  the ``cmakexbuild`` wrapper is needed only for older Xcode versions,
-  and the path to ``cmakexbuild`` may be outdated if CMake itself moves.
-
-  For compatibility with versions of CMake prior to 3.2, if
-  a user or project explicitly adds ``CMAKE_MAKE_PROGRAM`` to
-  the CMake cache then CMake will use the specified value.
-
-* The Visual Studio generators set this to the full path to
-  ``MSBuild.exe`` (VS >= 10), ``devenv.com`` (VS 7,8,9),
-  ``VCExpress.exe`` (VS Express 8,9), or ``msdev.exe`` (VS 6).
-  (See also variables
-  :variable:`CMAKE_VS_MSBUILD_COMMAND`,
-  :variable:`CMAKE_VS_DEVENV_COMMAND`, and
-  :variable:`CMAKE_VS_MSDEV_COMMAND`.)
-
-  These generators prefer to lookup the build tool at build time
-  rather than to store ``CMAKE_MAKE_PROGRAM`` in the CMake cache
-  ahead of time.  This is because the tools are version-specific
-  and can be located using the Windows Registry.  It is also
-  necessary because the proper build tool may depend on the
-  project content (e.g. the Intel Fortran plugin to VS 10 and 11
-  requires ``devenv.com`` to build its ``.vfproj`` project files
-  even though ``MSBuild.exe`` is normally preferred to support
-  the :variable:`CMAKE_GENERATOR_TOOLSET`).
-
-  For compatibility with versions of CMake prior to 3.0, if
-  a user or project explicitly adds ``CMAKE_MAKE_PROGRAM`` to
-  the CMake cache then CMake will use the specified value if
-  possible.
-
-The ``CMAKE_MAKE_PROGRAM`` variable is set for use by project code.
-The value is also used by the :manual:`cmake(1)` ``--build`` and
-:manual:`ctest(1)` ``--build-and-test`` tools to launch the native
-build process.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG.rst b/share/cmake-3.2/Help/variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG.rst
deleted file mode 100644
index 41ccde1..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_MAP_IMPORTED_CONFIG_<CONFIG>
-----------------------------------
-
-Default value for MAP_IMPORTED_CONFIG_<CONFIG> of targets.
-
-This variable is used to initialize the MAP_IMPORTED_CONFIG_<CONFIG>
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MFC_FLAG.rst b/share/cmake-3.2/Help/variable/CMAKE_MFC_FLAG.rst
deleted file mode 100644
index 221d26e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MFC_FLAG.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-CMAKE_MFC_FLAG
---------------
-
-Tell cmake to use MFC for an executable or dll.
-
-This can be set in a CMakeLists.txt file and will enable MFC in the
-application.  It should be set to 1 for the static MFC library, and 2
-for the shared MFC library.  This is used in Visual Studio 6 and 7
-project files.  The CMakeSetup dialog used MFC and the CMakeLists.txt
-looks like this:
-
-::
-
-  add_definitions(-D_AFXDLL)
-  set(CMAKE_MFC_FLAG 2)
-  add_executable(CMakeSetup WIN32 ${SRCS})
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MINIMUM_REQUIRED_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_MINIMUM_REQUIRED_VERSION.rst
deleted file mode 100644
index 351de44..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MINIMUM_REQUIRED_VERSION.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_MINIMUM_REQUIRED_VERSION
-------------------------------
-
-Version specified to cmake_minimum_required command
-
-Variable containing the VERSION component specified in the
-cmake_minimum_required command.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.2/Help/variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG.rst
deleted file mode 100644
index 87a1901..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CMAKE_MODULE_LINKER_FLAGS_<CONFIG>
-----------------------------------
-
-Flags to be used when linking a module.
-
-Same as CMAKE_C_FLAGS_* but used by the linker when creating modules.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MODULE_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_MODULE_PATH.rst
deleted file mode 100644
index a2dde45..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_MODULE_PATH.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_MODULE_PATH
------------------
-
-List of directories to search for CMake modules.
-
-Commands like include() and find_package() search for files in
-directories listed by this variable before checking the default
-modules that come with CMake.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_NOT_USING_CONFIG_FLAGS.rst b/share/cmake-3.2/Help/variable/CMAKE_NOT_USING_CONFIG_FLAGS.rst
deleted file mode 100644
index cbe0350..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_NOT_USING_CONFIG_FLAGS.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_NOT_USING_CONFIG_FLAGS
-----------------------------
-
-Skip _BUILD_TYPE flags if true.
-
-This is an internal flag used by the generators in CMake to tell CMake
-to skip the _BUILD_TYPE flags.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_NO_SYSTEM_FROM_IMPORTED.rst b/share/cmake-3.2/Help/variable/CMAKE_NO_SYSTEM_FROM_IMPORTED.rst
deleted file mode 100644
index c1919af..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_NO_SYSTEM_FROM_IMPORTED.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_NO_SYSTEM_FROM_IMPORTED
------------------------------
-
-Default value for NO_SYSTEM_FROM_IMPORTED of targets.
-
-This variable is used to initialize the NO_SYSTEM_FROM_IMPORTED
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_OSX_ARCHITECTURES.rst b/share/cmake-3.2/Help/variable/CMAKE_OSX_ARCHITECTURES.rst
deleted file mode 100644
index b9de518..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_OSX_ARCHITECTURES.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_OSX_ARCHITECTURES
------------------------
-
-Target specific architectures for OS X.
-
-This variable is used to initialize the :prop_tgt:`OSX_ARCHITECTURES`
-property on each target as it is creaed.  See that target property
-for additional information.
-
-.. include:: CMAKE_OSX_VARIABLE.txt
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PARENT_LIST_FILE.rst b/share/cmake-3.2/Help/variable/CMAKE_PARENT_LIST_FILE.rst
deleted file mode 100644
index 5566a72..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_PARENT_LIST_FILE.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_PARENT_LIST_FILE
-----------------------
-
-Full path to the CMake file that included the current one.
-
-While processing a CMake file loaded by include() or find_package()
-this variable contains the full path to the file including it.  The
-top of the include stack is always the CMakeLists.txt for the current
-directory.  See also CMAKE_CURRENT_LIST_FILE.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_POLICY_DEFAULT_CMPNNNN.rst b/share/cmake-3.2/Help/variable/CMAKE_POLICY_DEFAULT_CMPNNNN.rst
deleted file mode 100644
index e401aa5..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_POLICY_DEFAULT_CMPNNNN.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-CMAKE_POLICY_DEFAULT_CMP<NNNN>
-------------------------------
-
-Default for CMake Policy CMP<NNNN> when it is otherwise left unset.
-
-Commands cmake_minimum_required(VERSION) and cmake_policy(VERSION) by
-default leave policies introduced after the given version unset.  Set
-CMAKE_POLICY_DEFAULT_CMP<NNNN> to OLD or NEW to specify the default
-for policy CMP<NNNN>, where <NNNN> is the policy number.
-
-This variable should not be set by a project in CMake code; use
-cmake_policy(SET) instead.  Users running CMake may set this variable
-in the cache (e.g.  -DCMAKE_POLICY_DEFAULT_CMP<NNNN>=<OLD|NEW>) to set
-a policy not otherwise set by the project.  Set to OLD to quiet a
-policy warning while using old behavior or to NEW to try building the
-project with new behavior.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_POLICY_WARNING_CMPNNNN.rst b/share/cmake-3.2/Help/variable/CMAKE_POLICY_WARNING_CMPNNNN.rst
deleted file mode 100644
index a83c807..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_POLICY_WARNING_CMPNNNN.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CMAKE_POLICY_WARNING_CMP<NNNN>
-------------------------------
-
-Explicitly enable or disable the warning when CMake Policy ``CMP<NNNN>``
-is not set.  This is meaningful only for the few policies that do not
-warn by default:
-
-* ``CMAKE_POLICY_WARNING_CMP0025`` controls the warning for
-  policy :policy:`CMP0025`.
-* ``CMAKE_POLICY_WARNING_CMP0047`` controls the warning for
-  policy :policy:`CMP0047`.
-* ``CMAKE_POLICY_WARNING_CMP0056`` controls the warning for
-  policy :policy:`CMP0056`.
-
-This variable should not be set by a project in CMake code.  Project
-developers running CMake may set this variable in their cache to
-enable the warning (e.g. ``-DCMAKE_POLICY_WARNING_CMP<NNNN>=ON``).
-Alternatively, running :manual:`cmake(1)` with the ``--debug-output``
-or ``--trace`` option will also enable the warning.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_POSITION_INDEPENDENT_CODE.rst b/share/cmake-3.2/Help/variable/CMAKE_POSITION_INDEPENDENT_CODE.rst
deleted file mode 100644
index 5e71665..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_POSITION_INDEPENDENT_CODE.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_POSITION_INDEPENDENT_CODE
--------------------------------
-
-Default value for POSITION_INDEPENDENT_CODE of targets.
-
-This variable is used to initialize the POSITION_INDEPENDENT_CODE
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PREFIX_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_PREFIX_PATH.rst
deleted file mode 100644
index 4c21d5e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_PREFIX_PATH.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMAKE_PREFIX_PATH
------------------
-
-Path used for searching by FIND_XXX(), with appropriate suffixes added.
-
-Specifies a path which will be used by the FIND_XXX() commands.  It
-contains the "base" directories, the FIND_XXX() commands append
-appropriate subdirectories to the base directories.  So FIND_PROGRAM()
-adds /bin to each of the directories in the path, FIND_LIBRARY()
-appends /lib to each of the directories, and FIND_PATH() and
-FIND_FILE() append /include .  By default it is empty, it is intended
-to be set by the project.  See also CMAKE_SYSTEM_PREFIX_PATH,
-CMAKE_INCLUDE_PATH, CMAKE_LIBRARY_PATH, CMAKE_PROGRAM_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PROGRAM_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_PROGRAM_PATH.rst
deleted file mode 100644
index 02c5e02..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_PROGRAM_PATH.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_PROGRAM_PATH
-------------------
-
-Path used for searching by FIND_PROGRAM().
-
-Specifies a path which will be used by FIND_PROGRAM().  FIND_PROGRAM()
-will check each of the contained directories for the existence of the
-program which is currently searched.  By default it is empty, it is
-intended to be set by the project.  See also
-CMAKE_SYSTEM_PROGRAM_PATH, CMAKE_PREFIX_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PROJECT_NAME.rst b/share/cmake-3.2/Help/variable/CMAKE_PROJECT_NAME.rst
deleted file mode 100644
index 4734705..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_PROJECT_NAME.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_PROJECT_NAME
-------------------
-
-The name of the current project.
-
-This specifies name of the current project from the closest inherited
-PROJECT command.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ROOT.rst b/share/cmake-3.2/Help/variable/CMAKE_ROOT.rst
deleted file mode 100644
index f963a7f..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_ROOT.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_ROOT
-----------
-
-Install directory for running cmake.
-
-This is the install root for the running CMake and the Modules
-directory can be found here.  This is commonly used in this format:
-${CMAKE_ROOT}/Modules
diff --git a/share/cmake-3.2/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY.rst b/share/cmake-3.2/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY.rst
deleted file mode 100644
index 366ca66..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_RUNTIME_OUTPUT_DIRECTORY
-------------------------------
-
-Where to put all the RUNTIME targets when built.
-
-This variable is used to initialize the RUNTIME_OUTPUT_DIRECTORY
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SCRIPT_MODE_FILE.rst b/share/cmake-3.2/Help/variable/CMAKE_SCRIPT_MODE_FILE.rst
deleted file mode 100644
index ad73cc0..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SCRIPT_MODE_FILE.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SCRIPT_MODE_FILE
-----------------------
-
-Full path to the -P script file currently being processed.
-
-When run in -P script mode, CMake sets this variable to the full path
-of the script file.  When run to configure a CMakeLists.txt file, this
-variable is not set.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SHARED_LIBRARY_PREFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_SHARED_LIBRARY_PREFIX.rst
deleted file mode 100644
index a863e2a..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SHARED_LIBRARY_PREFIX.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SHARED_LIBRARY_PREFIX
----------------------------
-
-The prefix for shared libraries that you link to.
-
-The prefix to use for the name of a shared library, lib on UNIX.
-
-CMAKE_SHARED_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SHARED_LIBRARY_SUFFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_SHARED_LIBRARY_SUFFIX.rst
deleted file mode 100644
index c296ecd..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SHARED_LIBRARY_SUFFIX.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_SHARED_LIBRARY_SUFFIX
----------------------------
-
-The suffix for shared libraries that you link to.
-
-The suffix to use for the end of a shared library filename, .dll on
-Windows.
-
-CMAKE_SHARED_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.2/Help/variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG.rst
deleted file mode 100644
index fedc626..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_SHARED_LINKER_FLAGS_<CONFIG>
-----------------------------------
-
-Flags to be used when linking a shared library.
-
-Same as CMAKE_C_FLAGS_* but used by the linker when creating shared
-libraries.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SHARED_MODULE_PREFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_SHARED_MODULE_PREFIX.rst
deleted file mode 100644
index a5a2428..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SHARED_MODULE_PREFIX.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SHARED_MODULE_PREFIX
---------------------------
-
-The prefix for loadable modules that you link to.
-
-The prefix to use for the name of a loadable module on this platform.
-
-CMAKE_SHARED_MODULE_PREFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SHARED_MODULE_SUFFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_SHARED_MODULE_SUFFIX.rst
deleted file mode 100644
index 32a3c34..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SHARED_MODULE_SUFFIX.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_SHARED_MODULE_SUFFIX
---------------------------
-
-The suffix for shared libraries that you link to.
-
-The suffix to use for the end of a loadable module filename on this
-platform
-
-CMAKE_SHARED_MODULE_SUFFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SIZEOF_VOID_P.rst b/share/cmake-3.2/Help/variable/CMAKE_SIZEOF_VOID_P.rst
deleted file mode 100644
index 2697fad..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SIZEOF_VOID_P.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SIZEOF_VOID_P
--------------------
-
-Size of a void pointer.
-
-This is set to the size of a pointer on the machine, and is determined
-by a try compile.  If a 64 bit size is found, then the library search
-path is modified to look for 64 bit libraries first.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY.rst b/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY.rst
deleted file mode 100644
index 33ee8a8..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_SKIP_INSTALL_ALL_DEPENDENCY
----------------------------------
-
-Don't make the install target depend on the all target.
-
-By default, the "install" target depends on the "all" target.  This
-has the effect, that when "make install" is invoked or INSTALL is
-built, first the "all" target is built, then the installation starts.
-If CMAKE_SKIP_INSTALL_ALL_DEPENDENCY is set to TRUE, this dependency
-is not created, so the installation process will start immediately,
-independent from whether the project has been completely built or not.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_RPATH.rst b/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_RPATH.rst
deleted file mode 100644
index f16b212..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_RPATH.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-CMAKE_SKIP_INSTALL_RPATH
-------------------------
-
-Do not include RPATHs in the install tree.
-
-Normally CMake uses the build tree for the RPATH when building
-executables etc on systems that use RPATH.  When the software is
-installed the executables etc are relinked by CMake to have the
-install RPATH.  If this variable is set to true then the software is
-always installed without RPATH, even if RPATH is enabled when
-building.  This can be useful for example to allow running tests from
-the build directory with RPATH enabled before the installation step.
-To omit RPATH in both the build and install steps, use
-CMAKE_SKIP_RPATH instead.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_RULES.rst b/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_RULES.rst
deleted file mode 100644
index 5eda254..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SKIP_INSTALL_RULES.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_SKIP_INSTALL_RULES
-------------------------
-
-Whether to disable generation of installation rules.
-
-If TRUE, cmake will neither generate installaton rules nor
-will it generate cmake_install.cmake files. This variable is FALSE by default.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SKIP_RPATH.rst b/share/cmake-3.2/Help/variable/CMAKE_SKIP_RPATH.rst
deleted file mode 100644
index c93f67f..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SKIP_RPATH.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_SKIP_RPATH
-----------------
-
-If true, do not add run time path information.
-
-If this is set to TRUE, then the rpath information is not added to
-compiled executables.  The default is to add rpath information if the
-platform supports it.  This allows for easy running from the build
-tree.  To omit RPATH in the install step, but not the build step, use
-CMAKE_SKIP_INSTALL_RPATH instead.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SOURCE_DIR.rst b/share/cmake-3.2/Help/variable/CMAKE_SOURCE_DIR.rst
deleted file mode 100644
index 088fa83..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SOURCE_DIR.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SOURCE_DIR
-----------------
-
-The path to the top level of the source tree.
-
-This is the full path to the top level of the current CMake source
-tree.  For an in-source build, this would be the same as
-CMAKE_BINARY_DIR.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_STAGING_PREFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_STAGING_PREFIX.rst
deleted file mode 100644
index c4de7da..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_STAGING_PREFIX.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CMAKE_STAGING_PREFIX
---------------------
-
-This variable may be set to a path to install to when cross-compiling. This can
-be useful if the path in :variable:`CMAKE_SYSROOT` is read-only, or otherwise
-should remain pristine.
-
-The CMAKE_STAGING_PREFIX location is also used as a search prefix by the ``find_*``
-commands. This can be controlled by setting the :variable:`CMAKE_FIND_NO_INSTALL_PREFIX`
-variable.
-
-If any RPATH/RUNPATH entries passed to the linker contain the CMAKE_STAGING_PREFIX,
-the matching path fragments are replaced with the :variable:`CMAKE_INSTALL_PREFIX`.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_STANDARD_LIBRARIES.rst b/share/cmake-3.2/Help/variable/CMAKE_STANDARD_LIBRARIES.rst
deleted file mode 100644
index 9c728cd..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_STANDARD_LIBRARIES.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_STANDARD_LIBRARIES
-------------------------
-
-Libraries linked into every executable and shared library.
-
-This is the list of libraries that are linked into all executables and
-libraries.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_STATIC_LIBRARY_PREFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_STATIC_LIBRARY_PREFIX.rst
deleted file mode 100644
index 0a3095d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_STATIC_LIBRARY_PREFIX.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_STATIC_LIBRARY_PREFIX
----------------------------
-
-The prefix for static libraries that you link to.
-
-The prefix to use for the name of a static library, lib on UNIX.
-
-CMAKE_STATIC_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_STATIC_LIBRARY_SUFFIX.rst b/share/cmake-3.2/Help/variable/CMAKE_STATIC_LIBRARY_SUFFIX.rst
deleted file mode 100644
index 4d07671..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_STATIC_LIBRARY_SUFFIX.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_STATIC_LIBRARY_SUFFIX
----------------------------
-
-The suffix for static libraries that you link to.
-
-The suffix to use for the end of a static library filename, .lib on
-Windows.
-
-CMAKE_STATIC_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.2/Help/variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG.rst
deleted file mode 100644
index 6cde24d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_STATIC_LINKER_FLAGS_<CONFIG>
-----------------------------------
-
-Flags to be used when linking a static library.
-
-Same as CMAKE_C_FLAGS_* but used by the linker when creating static
-libraries.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM.rst
deleted file mode 100644
index 23f5980..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_SYSTEM
-------------
-
-Composit Name of OS CMake is compiling for.
-
-This variable is the composite of :variable:`CMAKE_SYSTEM_NAME` and
-:variable:`CMAKE_SYSTEM_VERSION`, e.g.
-``${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}``.  If
-:variable:`CMAKE_SYSTEM_VERSION` is not set, then this variable is
-the same as :variable:`CMAKE_SYSTEM_NAME`.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_IGNORE_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_IGNORE_PATH.rst
deleted file mode 100644
index 9e6b195..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_IGNORE_PATH.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-CMAKE_SYSTEM_IGNORE_PATH
-------------------------
-
-Path to be ignored by FIND_XXX() commands.
-
-Specifies directories to be ignored by searches in FIND_XXX()
-commands.  This is useful in cross-compiled environments where some
-system directories contain incompatible but possibly linkable
-libraries.  For example, on cross-compiled cluster environments, this
-allows a user to ignore directories containing libraries meant for the
-front-end machine that modules like FindX11 (and others) would
-normally search.  By default this contains a list of directories
-containing incompatible binaries for the host system.  See also
-CMAKE_SYSTEM_PREFIX_PATH, CMAKE_SYSTEM_LIBRARY_PATH,
-CMAKE_SYSTEM_INCLUDE_PATH, and CMAKE_SYSTEM_PROGRAM_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_INCLUDE_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_INCLUDE_PATH.rst
deleted file mode 100644
index 1734185..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_INCLUDE_PATH.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_SYSTEM_INCLUDE_PATH
--------------------------
-
-Path used for searching by FIND_FILE() and FIND_PATH().
-
-Specifies a path which will be used both by FIND_FILE() and
-FIND_PATH().  Both commands will check each of the contained
-directories for the existence of the file which is currently searched.
-By default it contains the standard directories for the current
-system.  It is NOT intended to be modified by the project, use
-CMAKE_INCLUDE_PATH for this.  See also CMAKE_SYSTEM_PREFIX_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_LIBRARY_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_LIBRARY_PATH.rst
deleted file mode 100644
index 4778646..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_LIBRARY_PATH.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_SYSTEM_LIBRARY_PATH
--------------------------
-
-Path used for searching by FIND_LIBRARY().
-
-Specifies a path which will be used by FIND_LIBRARY().  FIND_LIBRARY()
-will check each of the contained directories for the existence of the
-library which is currently searched.  By default it contains the
-standard directories for the current system.  It is NOT intended to be
-modified by the project, use CMAKE_LIBRARY_PATH for this.  See also
-CMAKE_SYSTEM_PREFIX_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_NAME.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_NAME.rst
deleted file mode 100644
index 189dc18..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_NAME.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SYSTEM_NAME
------------------
-
-Name of the OS CMake is building for.
-
-This is the name of the OS on which CMake is targeting.  This variable
-is the same as :variable:`CMAKE_HOST_SYSTEM_NAME` if you build for the
-host system instead of the target system when cross compiling.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PREFIX_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PREFIX_PATH.rst
deleted file mode 100644
index 537eaba..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PREFIX_PATH.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-CMAKE_SYSTEM_PREFIX_PATH
-------------------------
-
-Path used for searching by FIND_XXX(), with appropriate suffixes added.
-
-Specifies a path which will be used by the FIND_XXX() commands.  It
-contains the "base" directories, the FIND_XXX() commands append
-appropriate subdirectories to the base directories.  So FIND_PROGRAM()
-adds /bin to each of the directories in the path, FIND_LIBRARY()
-appends /lib to each of the directories, and FIND_PATH() and
-FIND_FILE() append /include .  By default this contains the standard
-directories for the current system, the CMAKE_INSTALL_PREFIX and
-the :variable:`CMAKE_STAGING_PREFIX`.  It is NOT intended to be modified by
-the project, use CMAKE_PREFIX_PATH for this.  See also CMAKE_SYSTEM_INCLUDE_PATH,
-CMAKE_SYSTEM_LIBRARY_PATH, CMAKE_SYSTEM_PROGRAM_PATH, and
-CMAKE_SYSTEM_IGNORE_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PROCESSOR.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PROCESSOR.rst
deleted file mode 100644
index 8ad89f1..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PROCESSOR.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SYSTEM_PROCESSOR
-----------------------
-
-The name of the CPU CMake is building for.
-
-This variable is the same as :variable:`CMAKE_HOST_SYSTEM_PROCESSOR` if
-you build for the host system instead of the target system when
-cross compiling.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PROGRAM_PATH.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PROGRAM_PATH.rst
deleted file mode 100644
index e1fad63..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_PROGRAM_PATH.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-CMAKE_SYSTEM_PROGRAM_PATH
--------------------------
-
-Path used for searching by FIND_PROGRAM().
-
-Specifies a path which will be used by FIND_PROGRAM().  FIND_PROGRAM()
-will check each of the contained directories for the existence of the
-program which is currently searched.  By default it contains the
-standard directories for the current system.  It is NOT intended to be
-modified by the project, use CMAKE_PROGRAM_PATH for this.  See also
-CMAKE_SYSTEM_PREFIX_PATH.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_VERSION.rst
deleted file mode 100644
index 33510bb..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_SYSTEM_VERSION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_SYSTEM_VERSION
---------------------
-
-The OS version CMake is building for.
-
-This variable is the same as :variable:`CMAKE_HOST_SYSTEM_VERSION` if
-you build for the host system instead of the target system when
-cross compiling.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_TOOLCHAIN_FILE.rst b/share/cmake-3.2/Help/variable/CMAKE_TOOLCHAIN_FILE.rst
deleted file mode 100644
index e1a65e1..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_TOOLCHAIN_FILE.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_TOOLCHAIN_FILE
---------------------
-
-Path to toolchain file supplied to :manual:`cmake(1)`.
-
-This variable is specified on the command line when cross-compiling with CMake.
-It is the path to a file which is read early in the CMake run and which specifies
-locations for compilers and toolchain utilities, and other target platform and
-compiler related information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_TRY_COMPILE_CONFIGURATION.rst b/share/cmake-3.2/Help/variable/CMAKE_TRY_COMPILE_CONFIGURATION.rst
deleted file mode 100644
index a92feab..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_TRY_COMPILE_CONFIGURATION.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_TRY_COMPILE_CONFIGURATION
--------------------------------
-
-Build configuration used for try_compile and try_run projects.
-
-Projects built by try_compile and try_run are built synchronously
-during the CMake configuration step.  Therefore a specific build
-configuration must be chosen even if the generated build system
-supports multiple configurations.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE.rst b/share/cmake-3.2/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE.rst
deleted file mode 100644
index 5a4c86b..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-CMAKE_USER_MAKE_RULES_OVERRIDE
-------------------------------
-
-Specify a CMake file that overrides platform information.
-
-CMake loads the specified file while enabling support for each
-language from either the project() or enable_language() commands.  It
-is loaded after CMake's builtin compiler and platform information
-modules have been loaded but before the information is used.  The file
-may set platform information variables to override CMake's defaults.
-
-This feature is intended for use only in overriding information
-variables that must be set before CMake builds its first test project
-to check that the compiler for a language works.  It should not be
-used to load a file in cases that a normal include() will work.  Use
-it only as a last resort for behavior that cannot be achieved any
-other way.  For example, one may set CMAKE_C_FLAGS_INIT to change the
-default value used to initialize CMAKE_C_FLAGS before it is cached.
-The override file should NOT be used to set anything that could be set
-after languages are enabled, such as variables like
-CMAKE_RUNTIME_OUTPUT_DIRECTORY that affect the placement of binaries.
-Information set in the file will be used for try_compile and try_run
-builds too.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG.rst b/share/cmake-3.2/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG.rst
deleted file mode 100644
index e6d2c68..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG>
--------------------------------------
-
-Specify a CMake file that overrides platform information for <LANG>.
-
-This is a language-specific version of CMAKE_USER_MAKE_RULES_OVERRIDE
-loaded only when enabling language <LANG>.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_USE_RELATIVE_PATHS.rst b/share/cmake-3.2/Help/variable/CMAKE_USE_RELATIVE_PATHS.rst
deleted file mode 100644
index af6f08c..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_USE_RELATIVE_PATHS.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_USE_RELATIVE_PATHS
-------------------------
-
-Use relative paths (May not work!).
-
-If this is set to TRUE, then CMake will use relative paths between the
-source and binary tree.  This option does not work for more
-complicated projects, and relative paths are used when possible.  In
-general, it is not possible to move CMake generated makefiles to a
-different location regardless of the value of this variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VERBOSE_MAKEFILE.rst b/share/cmake-3.2/Help/variable/CMAKE_VERBOSE_MAKEFILE.rst
deleted file mode 100644
index 2420a25..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_VERBOSE_MAKEFILE.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_VERBOSE_MAKEFILE
-----------------------
-
-Enable verbose output from Makefile builds.
-
-This variable is a cache entry initialized (to FALSE) by
-the :command:`project` command.  Users may enable the option
-in their local build tree to get more verbose output from
-Makefile builds and show each command line as it is launched.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VISIBILITY_INLINES_HIDDEN.rst b/share/cmake-3.2/Help/variable/CMAKE_VISIBILITY_INLINES_HIDDEN.rst
deleted file mode 100644
index f55c7b1..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_VISIBILITY_INLINES_HIDDEN.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_VISIBILITY_INLINES_HIDDEN
--------------------------------
-
-Default value for VISIBILITY_INLINES_HIDDEN of targets.
-
-This variable is used to initialize the VISIBILITY_INLINES_HIDDEN
-property on all the targets.  See that target property for additional
-information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION.rst b/share/cmake-3.2/Help/variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION.rst
deleted file mode 100644
index 7e9d317..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_VS_INTEL_Fortran_PROJECT_VERSION
---------------------------------------
-
-When generating for Visual Studio 7 or greater with the Intel Fortran
-plugin installed, this specifies the .vfproj project file format
-version.  This is intended for internal use by CMake and should not be
-used by project code.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VS_MSDEV_COMMAND.rst b/share/cmake-3.2/Help/variable/CMAKE_VS_MSDEV_COMMAND.rst
deleted file mode 100644
index 718baaf..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_VS_MSDEV_COMMAND.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_VS_MSDEV_COMMAND
-----------------------
-
-The :generator:`Visual Studio 6` generator sets this variable to the
-``msdev.exe`` command installed with Visual Studio 6.
-
-This variable is not defined by other generators even if ``msdev.exe``
-is installed on the computer.
-
-See also the :variable:`CMAKE_MAKE_PROGRAM` variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VS_PLATFORM_TOOLSET.rst b/share/cmake-3.2/Help/variable/CMAKE_VS_PLATFORM_TOOLSET.rst
deleted file mode 100644
index 08c6061..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_VS_PLATFORM_TOOLSET.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_VS_PLATFORM_TOOLSET
--------------------------
-
-Visual Studio Platform Toolset name.
-
-VS 10 and above use MSBuild under the hood and support multiple
-compiler toolchains.  CMake may specify a toolset explicitly, such as
-"v110" for VS 11 or "Windows7.1SDK" for 64-bit support in VS 10
-Express.  CMake provides the name of the chosen toolset in this
-variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_WARN_DEPRECATED.rst b/share/cmake-3.2/Help/variable/CMAKE_WARN_DEPRECATED.rst
deleted file mode 100644
index 7b2510b..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_WARN_DEPRECATED.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_WARN_DEPRECATED
----------------------
-
-Whether to issue deprecation warnings for macros and functions.
-
-If TRUE, this can be used by macros and functions to issue deprecation
-warnings.  This variable is FALSE by default.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.2/Help/variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
deleted file mode 100644
index f6a188d..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
-------------------------------------------
-
-Ask cmake_install.cmake script to warn each time a file with absolute INSTALL DESTINATION is encountered.
-
-This variable is used by CMake-generated cmake_install.cmake scripts.
-If one sets this variable to ON while running the script, it may get
-warning messages from the script.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_WIN32_EXECUTABLE.rst b/share/cmake-3.2/Help/variable/CMAKE_WIN32_EXECUTABLE.rst
deleted file mode 100644
index 3e1e0dd..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_WIN32_EXECUTABLE.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CMAKE_WIN32_EXECUTABLE
-----------------------
-
-Default value for WIN32_EXECUTABLE of targets.
-
-This variable is used to initialize the WIN32_EXECUTABLE property on
-all the targets.  See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_XCODE_ATTRIBUTE_an-attribute.rst b/share/cmake-3.2/Help/variable/CMAKE_XCODE_ATTRIBUTE_an-attribute.rst
deleted file mode 100644
index 096f64e..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_XCODE_ATTRIBUTE_an-attribute.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CMAKE_XCODE_ATTRIBUTE_<an-attribute>
-------------------------------------
-
-Set Xcode target attributes directly.
-
-Tell the Xcode generator to set '<an-attribute>' to a given value in
-the generated Xcode project.  Ignored on other generators.
-
-See the :prop_tgt:`XCODE_ATTRIBUTE_<an-attribute>` target property
-to set attributes on a specific target.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_XCODE_PLATFORM_TOOLSET.rst b/share/cmake-3.2/Help/variable/CMAKE_XCODE_PLATFORM_TOOLSET.rst
deleted file mode 100644
index f0a4841..0000000
--- a/share/cmake-3.2/Help/variable/CMAKE_XCODE_PLATFORM_TOOLSET.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-CMAKE_XCODE_PLATFORM_TOOLSET
-----------------------------
-
-Xcode compiler selection.
-
-Xcode supports selection of a compiler from one of the installed
-toolsets.  CMake provides the name of the chosen toolset in this
-variable, if any is explicitly selected (e.g.  via the cmake -T
-option).
diff --git a/share/cmake-3.2/Help/variable/CPACK_ABSOLUTE_DESTINATION_FILES.rst b/share/cmake-3.2/Help/variable/CPACK_ABSOLUTE_DESTINATION_FILES.rst
deleted file mode 100644
index d836629..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_ABSOLUTE_DESTINATION_FILES.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CPACK_ABSOLUTE_DESTINATION_FILES
---------------------------------
-
-List of files which have been installed using  an ABSOLUTE DESTINATION path.
-
-This variable is a Read-Only variable which is set internally by CPack
-during installation and before packaging using
-CMAKE_ABSOLUTE_DESTINATION_FILES defined in cmake_install.cmake
-scripts.  The value can be used within CPack project configuration
-file and/or CPack<GEN>.cmake file of <GEN> generator.
diff --git a/share/cmake-3.2/Help/variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY.rst b/share/cmake-3.2/Help/variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY.rst
deleted file mode 100644
index e938978..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY
-------------------------------------------
-
-Boolean toggle to include/exclude top level directory (component case).
-
-Similar usage as CPACK_INCLUDE_TOPLEVEL_DIRECTORY but for the
-component case.  See CPACK_INCLUDE_TOPLEVEL_DIRECTORY documentation
-for the detail.
diff --git a/share/cmake-3.2/Help/variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.2/Help/variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
deleted file mode 100644
index 4d96385..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
--------------------------------------------
-
-Ask CPack to error out as soon as a file with absolute INSTALL DESTINATION is encountered.
-
-The fatal error is emitted before the installation of the offending
-file takes place.  Some CPack generators, like NSIS,enforce this
-internally.  This variable triggers the definition
-ofCMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION when CPack runsVariables
-common to all CPack generators
diff --git a/share/cmake-3.2/Help/variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY.rst b/share/cmake-3.2/Help/variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY.rst
deleted file mode 100644
index 4f96bff..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY.rst
+++ /dev/null
@@ -1,19 +0,0 @@
-CPACK_INCLUDE_TOPLEVEL_DIRECTORY
---------------------------------
-
-Boolean toggle to include/exclude top level directory.
-
-When preparing a package CPack installs the item under the so-called
-top level directory.  The purpose of is to include (set to 1 or ON or
-TRUE) the top level directory in the package or not (set to 0 or OFF
-or FALSE).
-
-Each CPack generator has a built-in default value for this variable.
-E.g.  Archive generators (ZIP, TGZ, ...) includes the top level
-whereas RPM or DEB don't.  The user may override the default value by
-setting this variable.
-
-There is a similar variable CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY
-which may be used to override the behavior for the component packaging
-case which may have different default value for historical (now
-backward compatibility) reason.
diff --git a/share/cmake-3.2/Help/variable/CPACK_INSTALL_SCRIPT.rst b/share/cmake-3.2/Help/variable/CPACK_INSTALL_SCRIPT.rst
deleted file mode 100644
index 59b8cd7..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_INSTALL_SCRIPT.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CPACK_INSTALL_SCRIPT
---------------------
-
-Extra CMake script provided by the user.
-
-If set this CMake script will be executed by CPack during its local
-[CPack-private] installation which is done right before packaging the
-files.  The script is not called by e.g.: make install.
diff --git a/share/cmake-3.2/Help/variable/CPACK_PACKAGING_INSTALL_PREFIX.rst b/share/cmake-3.2/Help/variable/CPACK_PACKAGING_INSTALL_PREFIX.rst
deleted file mode 100644
index f9cfa1b..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_PACKAGING_INSTALL_PREFIX.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-CPACK_PACKAGING_INSTALL_PREFIX
-------------------------------
-
-The prefix used in the built package.
-
-Each CPack generator has a default value (like /usr).  This default
-value may be overwritten from the CMakeLists.txt or the cpack command
-line by setting an alternative value.
-
-e.g.  set(CPACK_PACKAGING_INSTALL_PREFIX "/opt")
-
-This is not the same purpose as CMAKE_INSTALL_PREFIX which is used
-when installing from the build tree without building a package.
diff --git a/share/cmake-3.2/Help/variable/CPACK_SET_DESTDIR.rst b/share/cmake-3.2/Help/variable/CPACK_SET_DESTDIR.rst
deleted file mode 100644
index 69d82e6..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_SET_DESTDIR.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-CPACK_SET_DESTDIR
------------------
-
-Boolean toggle to make CPack use DESTDIR mechanism when packaging.
-
-DESTDIR means DESTination DIRectory.  It is commonly used by makefile
-users in order to install software at non-default location.  It is a
-basic relocation mechanism that should not be used on Windows (see
-CMAKE_INSTALL_PREFIX documentation).  It is usually invoked like this:
-
-::
-
- make DESTDIR=/home/john install
-
-which will install the concerned software using the installation
-prefix, e.g.  "/usr/local" prepended with the DESTDIR value which
-finally gives "/home/john/usr/local".  When preparing a package, CPack
-first installs the items to be packaged in a local (to the build tree)
-directory by using the same DESTDIR mechanism.  Nevertheless, if
-CPACK_SET_DESTDIR is set then CPack will set DESTDIR before doing the
-local install.  The most noticeable difference is that without
-CPACK_SET_DESTDIR, CPack uses CPACK_PACKAGING_INSTALL_PREFIX as a
-prefix whereas with CPACK_SET_DESTDIR set, CPack will use
-CMAKE_INSTALL_PREFIX as a prefix.
-
-Manually setting CPACK_SET_DESTDIR may help (or simply be necessary)
-if some install rules uses absolute DESTINATION (see CMake INSTALL
-command).  However, starting with CPack/CMake 2.8.3 RPM and DEB
-installers tries to handle DESTDIR automatically so that it is seldom
-necessary for the user to set it.
diff --git a/share/cmake-3.2/Help/variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.2/Help/variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
deleted file mode 100644
index 8d6f54f..0000000
--- a/share/cmake-3.2/Help/variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
-------------------------------------------
-
-Ask CPack to warn each time a file with absolute INSTALL DESTINATION is encountered.
-
-This variable triggers the definition of
-CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION when CPack runs
-cmake_install.cmake scripts.
diff --git a/share/cmake-3.2/Help/variable/CTEST_COVERAGE_COMMAND.rst b/share/cmake-3.2/Help/variable/CTEST_COVERAGE_COMMAND.rst
deleted file mode 100644
index a669dd7..0000000
--- a/share/cmake-3.2/Help/variable/CTEST_COVERAGE_COMMAND.rst
+++ /dev/null
@@ -1,60 +0,0 @@
-CTEST_COVERAGE_COMMAND
-----------------------
-
-Specify the CTest ``CoverageCommand`` setting
-in a :manual:`ctest(1)` dashboard client script.
-
-Cobertura
-'''''''''
-
-Using `Cobertura`_ as the coverage generation within your multi-module
-Java project can generate a series of XML files.
-
-The Cobertura Coverage parser expects to read the coverage data from a
-single XML file which contains the coverage data for all modules.
-Cobertura has a program with the ability to merge given cobertura.ser files
-and then another program to generate a combined XML file from the previous
-merged file.  For command line testing, this can be done by hand prior to
-CTest looking for the coverage files. For script builds,
-set the ``CTEST_COVERAGE_COMMAND`` variable to point to a file which will
-perform these same steps, such as a .sh or .bat file.
-
-.. code-block:: cmake
-
-  set(CTEST_COVERAGE_COMMAND .../run-coverage-and-consolidate.sh)
-
-where the ``run-coverage-and-consolidate.sh`` script is perhaps created by
-the :command:`configure_file` command and might contain the following code:
-
-.. code-block:: bash
-
-  #!/usr/bin/env bash
-  CoberturaFiles="$(find "/path/to/source" -name "cobertura.ser")"
-  SourceDirs="$(find "/path/to/source" -name "java" -type d)"
-  cobertura-merge --datafile coberturamerge.ser $CoberturaFiles
-  cobertura-report --datafile coberturamerge.ser --destination . \
-                   --format xml $SourceDirs
-
-The script uses ``find`` to capture the paths to all of the cobertura.ser files
-found below the project's source directory.  It keeps the list of files and
-supplies it as an argument to the ``cobertura-merge`` program. The ``--datafile``
-argument signifies where the result of the merge will be kept.
-
-The combined ``coberturamerge.ser`` file is then used to generate the XML report
-using the ``cobertura-report`` program.  The call to the cobertura-report program
-requires some named arguments.
-
-``--datafila``
-  path to the merged .ser file
-
-``--destination``
-  path to put the output files(s)
-
-``--format``
-  file format to write output in: xml or html
-
-The rest of the supplied arguments consist of the full paths to the
-/src/main/java directories of each module within the souce tree. These
-directories are needed and should not be forgotten.
-
-.. _`Cobertura`: http://cobertura.github.io/cobertura/
diff --git a/share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_TYPE.rst b/share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_TYPE.rst
deleted file mode 100644
index f1087c0..0000000
--- a/share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_TYPE.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-CTEST_MEMORYCHECK_TYPE
-----------------------
-
-Specify the CTest ``MemoryCheckType`` setting
-in a :manual:`ctest(1)` dashboard client script.
-Valid values are Valgrind, Purify, BoundsChecker, and ThreadSanitizer,
-AddressSanitizer, MemorySanitizer, and UndefinedBehaviorSanitizer.
diff --git a/share/cmake-3.2/Help/variable/CYGWIN.rst b/share/cmake-3.2/Help/variable/CYGWIN.rst
deleted file mode 100644
index c168878..0000000
--- a/share/cmake-3.2/Help/variable/CYGWIN.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-CYGWIN
-------
-
-True for Cygwin.
-
-Set to true when using Cygwin.
diff --git a/share/cmake-3.2/Help/variable/ENV.rst b/share/cmake-3.2/Help/variable/ENV.rst
deleted file mode 100644
index 977afc3..0000000
--- a/share/cmake-3.2/Help/variable/ENV.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-ENV
----
-
-Access environment variables.
-
-Use the syntax $ENV{VAR} to read environment variable VAR.  See also
-the set() command to set ENV{VAR}.
diff --git a/share/cmake-3.2/Help/variable/EXECUTABLE_OUTPUT_PATH.rst b/share/cmake-3.2/Help/variable/EXECUTABLE_OUTPUT_PATH.rst
deleted file mode 100644
index 7079230..0000000
--- a/share/cmake-3.2/Help/variable/EXECUTABLE_OUTPUT_PATH.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-EXECUTABLE_OUTPUT_PATH
-----------------------
-
-Old executable location variable.
-
-The target property RUNTIME_OUTPUT_DIRECTORY supercedes this variable
-for a target if it is set.  Executable targets are otherwise placed in
-this directory.
diff --git a/share/cmake-3.2/Help/variable/LIBRARY_OUTPUT_PATH.rst b/share/cmake-3.2/Help/variable/LIBRARY_OUTPUT_PATH.rst
deleted file mode 100644
index 1c1f8ae..0000000
--- a/share/cmake-3.2/Help/variable/LIBRARY_OUTPUT_PATH.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-LIBRARY_OUTPUT_PATH
--------------------
-
-Old library location variable.
-
-The target properties ARCHIVE_OUTPUT_DIRECTORY,
-LIBRARY_OUTPUT_DIRECTORY, and RUNTIME_OUTPUT_DIRECTORY supercede this
-variable for a target if they are set.  Library targets are otherwise
-placed in this directory.
diff --git a/share/cmake-3.2/Help/variable/MINGW.rst b/share/cmake-3.2/Help/variable/MINGW.rst
deleted file mode 100644
index 521d417..0000000
--- a/share/cmake-3.2/Help/variable/MINGW.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MINGW
------
-
-True when using MinGW
-
-Set to true when the compiler is some version of MinGW.
diff --git a/share/cmake-3.2/Help/variable/MSVC.rst b/share/cmake-3.2/Help/variable/MSVC.rst
deleted file mode 100644
index e9f931b..0000000
--- a/share/cmake-3.2/Help/variable/MSVC.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC
-----
-
-True when using Microsoft Visual C
-
-Set to true when the compiler is some version of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC10.rst b/share/cmake-3.2/Help/variable/MSVC10.rst
deleted file mode 100644
index 894c5aa..0000000
--- a/share/cmake-3.2/Help/variable/MSVC10.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC10
-------
-
-True when using Microsoft Visual C 10.0
-
-Set to true when the compiler is version 10.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC11.rst b/share/cmake-3.2/Help/variable/MSVC11.rst
deleted file mode 100644
index fe25297..0000000
--- a/share/cmake-3.2/Help/variable/MSVC11.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC11
-------
-
-True when using Microsoft Visual C 11.0
-
-Set to true when the compiler is version 11.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC12.rst b/share/cmake-3.2/Help/variable/MSVC12.rst
deleted file mode 100644
index 216d3d3..0000000
--- a/share/cmake-3.2/Help/variable/MSVC12.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC12
-------
-
-True when using Microsoft Visual C 12.0
-
-Set to true when the compiler is version 12.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC14.rst b/share/cmake-3.2/Help/variable/MSVC14.rst
deleted file mode 100644
index 33c782b..0000000
--- a/share/cmake-3.2/Help/variable/MSVC14.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC14
-------
-
-True when using Microsoft Visual C 14.0
-
-Set to true when the compiler is version 14.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC60.rst b/share/cmake-3.2/Help/variable/MSVC60.rst
deleted file mode 100644
index 572e9f4..0000000
--- a/share/cmake-3.2/Help/variable/MSVC60.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC60
-------
-
-True when using Microsoft Visual C 6.0
-
-Set to true when the compiler is version 6.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC70.rst b/share/cmake-3.2/Help/variable/MSVC70.rst
deleted file mode 100644
index b1b7a88..0000000
--- a/share/cmake-3.2/Help/variable/MSVC70.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC70
-------
-
-True when using Microsoft Visual C 7.0
-
-Set to true when the compiler is version 7.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC71.rst b/share/cmake-3.2/Help/variable/MSVC71.rst
deleted file mode 100644
index af309a6..0000000
--- a/share/cmake-3.2/Help/variable/MSVC71.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC71
-------
-
-True when using Microsoft Visual C 7.1
-
-Set to true when the compiler is version 7.1 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC80.rst b/share/cmake-3.2/Help/variable/MSVC80.rst
deleted file mode 100644
index 306c67f..0000000
--- a/share/cmake-3.2/Help/variable/MSVC80.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC80
-------
-
-True when using Microsoft Visual C 8.0
-
-Set to true when the compiler is version 8.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC90.rst b/share/cmake-3.2/Help/variable/MSVC90.rst
deleted file mode 100644
index 3cfcc67..0000000
--- a/share/cmake-3.2/Help/variable/MSVC90.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-MSVC90
-------
-
-True when using Microsoft Visual C 9.0
-
-Set to true when the compiler is version 9.0 of Microsoft Visual C.
diff --git a/share/cmake-3.2/Help/variable/MSVC_IDE.rst b/share/cmake-3.2/Help/variable/MSVC_IDE.rst
deleted file mode 100644
index 055f876..0000000
--- a/share/cmake-3.2/Help/variable/MSVC_IDE.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-MSVC_IDE
---------
-
-True when using the Microsoft Visual C IDE
-
-Set to true when the target platform is the Microsoft Visual C IDE, as
-opposed to the command line compiler.
diff --git a/share/cmake-3.2/Help/variable/UNIX.rst b/share/cmake-3.2/Help/variable/UNIX.rst
deleted file mode 100644
index 82e3454..0000000
--- a/share/cmake-3.2/Help/variable/UNIX.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-UNIX
-----
-
-True for UNIX and UNIX like operating systems.
-
-Set to true when the target system is UNIX or UNIX like (i.e.  APPLE
-and CYGWIN).
diff --git a/share/cmake-3.2/Help/variable/WIN32.rst b/share/cmake-3.2/Help/variable/WIN32.rst
deleted file mode 100644
index 8cf7bf3..0000000
--- a/share/cmake-3.2/Help/variable/WIN32.rst
+++ /dev/null
@@ -1,6 +0,0 @@
-WIN32
------
-
-True on windows systems, including win64.
-
-Set to true when the target system is Windows.
diff --git a/share/cmake-3.2/Help/variable/XCODE_VERSION.rst b/share/cmake-3.2/Help/variable/XCODE_VERSION.rst
deleted file mode 100644
index b6f0403..0000000
--- a/share/cmake-3.2/Help/variable/XCODE_VERSION.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-XCODE_VERSION
--------------
-
-Version of Xcode (Xcode generator only).
-
-Under the Xcode generator, this is the version of Xcode as specified
-in "Xcode.app/Contents/version.plist" (such as "3.1.2").
diff --git a/share/cmake-3.2/Modules/BasicConfigVersion-AnyNewerVersion.cmake.in b/share/cmake-3.2/Modules/BasicConfigVersion-AnyNewerVersion.cmake.in
deleted file mode 100644
index b1c4fdf..0000000
--- a/share/cmake-3.2/Modules/BasicConfigVersion-AnyNewerVersion.cmake.in
+++ /dev/null
@@ -1,31 +0,0 @@
-# This is a basic version file for the Config-mode of find_package().
-# It is used by write_basic_package_version_file() as input file for configure_file()
-# to create a version-file which can be installed along a config.cmake file.
-#
-# The created file sets PACKAGE_VERSION_EXACT if the current version string and
-# the requested version string are exactly the same and it sets
-# PACKAGE_VERSION_COMPATIBLE if the current version is >= requested version.
-# The variable CVF_VERSION must be set before calling configure_file().
-
-set(PACKAGE_VERSION "@CVF_VERSION@")
-
-if("${PACKAGE_VERSION}" VERSION_LESS "${PACKAGE_FIND_VERSION}" )
-  set(PACKAGE_VERSION_COMPATIBLE FALSE)
-else()
-  set(PACKAGE_VERSION_COMPATIBLE TRUE)
-  if( "${PACKAGE_FIND_VERSION}" STREQUAL "${PACKAGE_VERSION}")
-    set(PACKAGE_VERSION_EXACT TRUE)
-  endif()
-endif()
-
-# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
-if("${CMAKE_SIZEOF_VOID_P}"  STREQUAL ""  OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "")
-   return()
-endif()
-
-# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
-if(NOT "${CMAKE_SIZEOF_VOID_P}"  STREQUAL  "@CMAKE_SIZEOF_VOID_P@")
-   math(EXPR installedBits "@CMAKE_SIZEOF_VOID_P@ * 8")
-   set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
-   set(PACKAGE_VERSION_UNSUITABLE TRUE)
-endif()
diff --git a/share/cmake-3.2/Modules/BasicConfigVersion-ExactVersion.cmake.in b/share/cmake-3.2/Modules/BasicConfigVersion-ExactVersion.cmake.in
deleted file mode 100644
index 9fd0136..0000000
--- a/share/cmake-3.2/Modules/BasicConfigVersion-ExactVersion.cmake.in
+++ /dev/null
@@ -1,47 +0,0 @@
-# This is a basic version file for the Config-mode of find_package().
-# It is used by write_basic_package_version_file() as input file for configure_file()
-# to create a version-file which can be installed along a config.cmake file.
-#
-# The created file sets PACKAGE_VERSION_EXACT if the current version string and
-# the requested version string are exactly the same and it sets
-# PACKAGE_VERSION_COMPATIBLE if the current version is equal to the requested version.
-# The tweak version component is ignored.
-# The variable CVF_VERSION must be set before calling configure_file().
-
-
-set(PACKAGE_VERSION "@CVF_VERSION@")
-
-if("@CVF_VERSION@" MATCHES "^([0-9]+\\.[0-9]+\\.[0-9]+)\\.") # strip the tweak version
-  set(CVF_VERSION_NO_TWEAK "${CMAKE_MATCH_1}")
-else()
-  set(CVF_VERSION_NO_TWEAK "@CVF_VERSION@")
-endif()
-
-if("${PACKAGE_FIND_VERSION}" MATCHES "^([0-9]+\\.[0-9]+\\.[0-9]+)\\.") # strip the tweak version
-  set(REQUESTED_VERSION_NO_TWEAK "${CMAKE_MATCH_1}")
-else()
-  set(REQUESTED_VERSION_NO_TWEAK "${PACKAGE_FIND_VERSION}")
-endif()
-
-if("${REQUESTED_VERSION_NO_TWEAK}" STREQUAL "${CVF_VERSION_NO_TWEAK}")
-  set(PACKAGE_VERSION_COMPATIBLE TRUE)
-else()
-  set(PACKAGE_VERSION_COMPATIBLE FALSE)
-endif()
-
-if( "${PACKAGE_FIND_VERSION}" STREQUAL "${PACKAGE_VERSION}")
-  set(PACKAGE_VERSION_EXACT TRUE)
-endif()
-
-
-# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
-if("${CMAKE_SIZEOF_VOID_P}"  STREQUAL ""  OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "")
-   return()
-endif()
-
-# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
-if(NOT "${CMAKE_SIZEOF_VOID_P}" STREQUAL "@CMAKE_SIZEOF_VOID_P@")
-  math(EXPR installedBits "@CMAKE_SIZEOF_VOID_P@ * 8")
-  set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
-  set(PACKAGE_VERSION_UNSUITABLE TRUE)
-endif()
diff --git a/share/cmake-3.2/Modules/BasicConfigVersion-SameMajorVersion.cmake.in b/share/cmake-3.2/Modules/BasicConfigVersion-SameMajorVersion.cmake.in
deleted file mode 100644
index 4acd9bb..0000000
--- a/share/cmake-3.2/Modules/BasicConfigVersion-SameMajorVersion.cmake.in
+++ /dev/null
@@ -1,46 +0,0 @@
-# This is a basic version file for the Config-mode of find_package().
-# It is used by write_basic_package_version_file() as input file for configure_file()
-# to create a version-file which can be installed along a config.cmake file.
-#
-# The created file sets PACKAGE_VERSION_EXACT if the current version string and
-# the requested version string are exactly the same and it sets
-# PACKAGE_VERSION_COMPATIBLE if the current version is >= requested version,
-# but only if the requested major version is the same as the current one.
-# The variable CVF_VERSION must be set before calling configure_file().
-
-
-set(PACKAGE_VERSION "@CVF_VERSION@")
-
-if("${PACKAGE_VERSION}" VERSION_LESS "${PACKAGE_FIND_VERSION}" )
-  set(PACKAGE_VERSION_COMPATIBLE FALSE)
-else()
-
-  if("@CVF_VERSION@" MATCHES "^([0-9]+)\\.")
-    set(CVF_VERSION_MAJOR "${CMAKE_MATCH_1}")
-  else()
-    set(CVF_VERSION_MAJOR "@CVF_VERSION@")
-  endif()
-
-  if("${PACKAGE_FIND_VERSION_MAJOR}" STREQUAL "${CVF_VERSION_MAJOR}")
-    set(PACKAGE_VERSION_COMPATIBLE TRUE)
-  else()
-    set(PACKAGE_VERSION_COMPATIBLE FALSE)
-  endif()
-
-  if( "${PACKAGE_FIND_VERSION}" STREQUAL "${PACKAGE_VERSION}")
-      set(PACKAGE_VERSION_EXACT TRUE)
-  endif()
-endif()
-
-
-# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
-if("${CMAKE_SIZEOF_VOID_P}"  STREQUAL ""  OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "")
-   return()
-endif()
-
-# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
-if(NOT "${CMAKE_SIZEOF_VOID_P}" STREQUAL "@CMAKE_SIZEOF_VOID_P@")
-  math(EXPR installedBits "@CMAKE_SIZEOF_VOID_P@ * 8")
-  set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
-  set(PACKAGE_VERSION_UNSUITABLE TRUE)
-endif()
diff --git a/share/cmake-3.2/Modules/BundleUtilities.cmake b/share/cmake-3.2/Modules/BundleUtilities.cmake
deleted file mode 100644
index fee0a7c..0000000
--- a/share/cmake-3.2/Modules/BundleUtilities.cmake
+++ /dev/null
@@ -1,966 +0,0 @@
-#.rst:
-# BundleUtilities
-# ---------------
-#
-# Functions to help assemble a standalone bundle application.
-#
-# A collection of CMake utility functions useful for dealing with .app
-# bundles on the Mac and bundle-like directories on any OS.
-#
-# The following functions are provided by this module:
-#
-# ::
-#
-#    fixup_bundle
-#    copy_and_fixup_bundle
-#    verify_app
-#    get_bundle_main_executable
-#    get_dotapp_dir
-#    get_bundle_and_executable
-#    get_bundle_all_executables
-#    get_item_key
-#    get_item_rpaths
-#    clear_bundle_keys
-#    set_bundle_key_values
-#    get_bundle_keys
-#    copy_resolved_item_into_bundle
-#    copy_resolved_framework_into_bundle
-#    fixup_bundle_item
-#    verify_bundle_prerequisites
-#    verify_bundle_symlinks
-#
-# Requires CMake 2.6 or greater because it uses function, break and
-# PARENT_SCOPE.  Also depends on GetPrerequisites.cmake.
-#
-# ::
-#
-#   FIXUP_BUNDLE(<app> <libs> <dirs>)
-#
-# Fix up a bundle in-place and make it standalone, such that it can be
-# drag-n-drop copied to another machine and run on that machine as long
-# as all of the system libraries are compatible.
-#
-# If you pass plugins to fixup_bundle as the libs parameter, you should
-# install them or copy them into the bundle before calling fixup_bundle.
-# The "libs" parameter is a list of libraries that must be fixed up, but
-# that cannot be determined by otool output analysis.  (i.e., plugins)
-#
-# Gather all the keys for all the executables and libraries in a bundle,
-# and then, for each key, copy each prerequisite into the bundle.  Then
-# fix each one up according to its own list of prerequisites.
-#
-# Then clear all the keys and call verify_app on the final bundle to
-# ensure that it is truly standalone.
-#
-# ::
-#
-#   COPY_AND_FIXUP_BUNDLE(<src> <dst> <libs> <dirs>)
-#
-# Makes a copy of the bundle <src> at location <dst> and then fixes up
-# the new copied bundle in-place at <dst>...
-#
-# ::
-#
-#   VERIFY_APP(<app>)
-#
-# Verifies that an application <app> appears valid based on running
-# analysis tools on it.  Calls "message(FATAL_ERROR" if the application
-# is not verified.
-#
-# ::
-#
-#   GET_BUNDLE_MAIN_EXECUTABLE(<bundle> <result_var>)
-#
-# The result will be the full path name of the bundle's main executable
-# file or an "error:" prefixed string if it could not be determined.
-#
-# ::
-#
-#   GET_DOTAPP_DIR(<exe> <dotapp_dir_var>)
-#
-# Returns the nearest parent dir whose name ends with ".app" given the
-# full path to an executable.  If there is no such parent dir, then
-# simply return the dir containing the executable.
-#
-# The returned directory may or may not exist.
-#
-# ::
-#
-#   GET_BUNDLE_AND_EXECUTABLE(<app> <bundle_var> <executable_var> <valid_var>)
-#
-# Takes either a ".app" directory name or the name of an executable
-# nested inside a ".app" directory and returns the path to the ".app"
-# directory in <bundle_var> and the path to its main executable in
-# <executable_var>
-#
-# ::
-#
-#   GET_BUNDLE_ALL_EXECUTABLES(<bundle> <exes_var>)
-#
-# Scans the given bundle recursively for all executable files and
-# accumulates them into a variable.
-#
-# ::
-#
-#   GET_ITEM_KEY(<item> <key_var>)
-#
-# Given a file (item) name, generate a key that should be unique
-# considering the set of libraries that need copying or fixing up to
-# make a bundle standalone.  This is essentially the file name including
-# extension with "." replaced by "_"
-#
-# This key is used as a prefix for CMake variables so that we can
-# associate a set of variables with a given item based on its key.
-#
-# ::
-#
-#   CLEAR_BUNDLE_KEYS(<keys_var>)
-#
-# Loop over the list of keys, clearing all the variables associated with
-# each key.  After the loop, clear the list of keys itself.
-#
-# Caller of get_bundle_keys should call clear_bundle_keys when done with
-# list of keys.
-#
-# ::
-#
-#   SET_BUNDLE_KEY_VALUES(<keys_var> <context> <item> <exepath> <dirs>
-#                         <copyflag> [<rpaths>])
-#
-# Add a key to the list (if necessary) for the given item.  If added,
-# also set all the variables associated with that key.
-#
-# ::
-#
-#   GET_BUNDLE_KEYS(<app> <libs> <dirs> <keys_var>)
-#
-# Loop over all the executable and library files within the bundle (and
-# given as extra <libs>) and accumulate a list of keys representing
-# them.  Set values associated with each key such that we can loop over
-# all of them and copy prerequisite libs into the bundle and then do
-# appropriate install_name_tool fixups.
-#
-# ::
-#
-#   COPY_RESOLVED_ITEM_INTO_BUNDLE(<resolved_item> <resolved_embedded_item>)
-#
-# Copy a resolved item into the bundle if necessary.  Copy is not
-# necessary if the resolved_item is "the same as" the
-# resolved_embedded_item.
-#
-# ::
-#
-#   COPY_RESOLVED_FRAMEWORK_INTO_BUNDLE(<resolved_item> <resolved_embedded_item>)
-#
-# Copy a resolved framework into the bundle if necessary.  Copy is not
-# necessary if the resolved_item is "the same as" the
-# resolved_embedded_item.
-#
-# By default, BU_COPY_FULL_FRAMEWORK_CONTENTS is not set.  If you want
-# full frameworks embedded in your bundles, set
-# BU_COPY_FULL_FRAMEWORK_CONTENTS to ON before calling fixup_bundle.  By
-# default, COPY_RESOLVED_FRAMEWORK_INTO_BUNDLE copies the framework
-# dylib itself plus the framework Resources directory.
-#
-# ::
-#
-#   FIXUP_BUNDLE_ITEM(<resolved_embedded_item> <exepath> <dirs>)
-#
-# Get the direct/non-system prerequisites of the resolved embedded item.
-# For each prerequisite, change the way it is referenced to the value of
-# the _EMBEDDED_ITEM keyed variable for that prerequisite.  (Most likely
-# changing to an "@executable_path" style reference.)
-#
-# This function requires that the resolved_embedded_item be "inside" the
-# bundle already.  In other words, if you pass plugins to fixup_bundle
-# as the libs parameter, you should install them or copy them into the
-# bundle before calling fixup_bundle.  The "libs" parameter is a list of
-# libraries that must be fixed up, but that cannot be determined by
-# otool output analysis.  (i.e., plugins)
-#
-# Also, change the id of the item being fixed up to its own
-# _EMBEDDED_ITEM value.
-#
-# Accumulate changes in a local variable and make *one* call to
-# install_name_tool at the end of the function with all the changes at
-# once.
-#
-# If the BU_CHMOD_BUNDLE_ITEMS variable is set then bundle items will be
-# marked writable before install_name_tool tries to change them.
-#
-# ::
-#
-#   VERIFY_BUNDLE_PREREQUISITES(<bundle> <result_var> <info_var>)
-#
-# Verifies that the sum of all prerequisites of all files inside the
-# bundle are contained within the bundle or are "system" libraries,
-# presumed to exist everywhere.
-#
-# ::
-#
-#   VERIFY_BUNDLE_SYMLINKS(<bundle> <result_var> <info_var>)
-#
-# Verifies that any symlinks found in the bundle point to other files
-# that are already also in the bundle...  Anything that points to an
-# external file causes this function to fail the verification.
-
-#=============================================================================
-# Copyright 2008-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# The functions defined in this file depend on the get_prerequisites function
-# (and possibly others) found in:
-#
-get_filename_component(BundleUtilities_cmake_dir "${CMAKE_CURRENT_LIST_FILE}" PATH)
-include("${BundleUtilities_cmake_dir}/GetPrerequisites.cmake")
-
-
-function(get_bundle_main_executable bundle result_var)
-  set(result "error: '${bundle}/Contents/Info.plist' file does not exist")
-
-  if(EXISTS "${bundle}/Contents/Info.plist")
-    set(result "error: no CFBundleExecutable in '${bundle}/Contents/Info.plist' file")
-    set(line_is_main_executable 0)
-    set(bundle_executable "")
-
-    # Read Info.plist as a list of lines:
-    #
-    set(eol_char "E")
-    file(READ "${bundle}/Contents/Info.plist" info_plist)
-    string(REPLACE ";" "\\;" info_plist "${info_plist}")
-    string(REPLACE "\n" "${eol_char};" info_plist "${info_plist}")
-    string(REPLACE "\r" "${eol_char};" info_plist "${info_plist}")
-
-    # Scan the lines for "<key>CFBundleExecutable</key>" - the line after that
-    # is the name of the main executable.
-    #
-    foreach(line ${info_plist})
-      if(line_is_main_executable)
-        string(REGEX REPLACE "^.*<string>(.*)</string>.*$" "\\1" bundle_executable "${line}")
-        break()
-      endif()
-
-      if(line MATCHES "<key>CFBundleExecutable</key>")
-        set(line_is_main_executable 1)
-      endif()
-    endforeach()
-
-    if(NOT "${bundle_executable}" STREQUAL "")
-      if(EXISTS "${bundle}/Contents/MacOS/${bundle_executable}")
-        set(result "${bundle}/Contents/MacOS/${bundle_executable}")
-      else()
-
-        # Ultimate goal:
-        # If not in "Contents/MacOS" then scan the bundle for matching files. If
-        # there is only one executable file that matches, then use it, otherwise
-        # it's an error...
-        #
-        #file(GLOB_RECURSE file_list "${bundle}/${bundle_executable}")
-
-        # But for now, pragmatically, it's an error. Expect the main executable
-        # for the bundle to be in Contents/MacOS, it's an error if it's not:
-        #
-        set(result "error: '${bundle}/Contents/MacOS/${bundle_executable}' does not exist")
-      endif()
-    endif()
-  else()
-    #
-    # More inclusive technique... (This one would work on Windows and Linux
-    # too, if a developer followed the typical Mac bundle naming convention...)
-    #
-    # If there is no Info.plist file, try to find an executable with the same
-    # base name as the .app directory:
-    #
-  endif()
-
-  set(${result_var} "${result}" PARENT_SCOPE)
-endfunction()
-
-
-function(get_dotapp_dir exe dotapp_dir_var)
-  set(s "${exe}")
-
-  if(s MATCHES "/.*\\.app/")
-    # If there is a ".app" parent directory,
-    # ascend until we hit it:
-    #   (typical of a Mac bundle executable)
-    #
-    set(done 0)
-    while(NOT ${done})
-      get_filename_component(snamewe "${s}" NAME_WE)
-      get_filename_component(sname "${s}" NAME)
-      get_filename_component(sdir "${s}" PATH)
-      set(s "${sdir}")
-      if(sname MATCHES "\\.app$")
-        set(done 1)
-        set(dotapp_dir "${sdir}/${sname}")
-      endif()
-    endwhile()
-  else()
-    # Otherwise use a directory containing the exe
-    #   (typical of a non-bundle executable on Mac, Windows or Linux)
-    #
-    is_file_executable("${s}" is_executable)
-    if(is_executable)
-      get_filename_component(sdir "${s}" PATH)
-      set(dotapp_dir "${sdir}")
-    else()
-      set(dotapp_dir "${s}")
-    endif()
-  endif()
-
-
-  set(${dotapp_dir_var} "${dotapp_dir}" PARENT_SCOPE)
-endfunction()
-
-
-function(get_bundle_and_executable app bundle_var executable_var valid_var)
-  set(valid 0)
-
-  if(EXISTS "${app}")
-    # Is it a directory ending in .app?
-    if(IS_DIRECTORY "${app}")
-      if(app MATCHES "\\.app$")
-        get_bundle_main_executable("${app}" executable)
-        if(EXISTS "${app}" AND EXISTS "${executable}")
-          set(${bundle_var} "${app}" PARENT_SCOPE)
-          set(${executable_var} "${executable}" PARENT_SCOPE)
-          set(valid 1)
-          #message(STATUS "info: handled .app directory case...")
-        else()
-          message(STATUS "warning: *NOT* handled - .app directory case...")
-        endif()
-      else()
-        message(STATUS "warning: *NOT* handled - directory but not .app case...")
-      endif()
-    else()
-      # Is it an executable file?
-      is_file_executable("${app}" is_executable)
-      if(is_executable)
-        get_dotapp_dir("${app}" dotapp_dir)
-        if(EXISTS "${dotapp_dir}")
-          set(${bundle_var} "${dotapp_dir}" PARENT_SCOPE)
-          set(${executable_var} "${app}" PARENT_SCOPE)
-          set(valid 1)
-          #message(STATUS "info: handled executable file in .app dir case...")
-        else()
-          get_filename_component(app_dir "${app}" PATH)
-          set(${bundle_var} "${app_dir}" PARENT_SCOPE)
-          set(${executable_var} "${app}" PARENT_SCOPE)
-          set(valid 1)
-          #message(STATUS "info: handled executable file in any dir case...")
-        endif()
-      else()
-        message(STATUS "warning: *NOT* handled - not .app dir, not executable file...")
-      endif()
-    endif()
-  else()
-    message(STATUS "warning: *NOT* handled - directory/file does not exist...")
-  endif()
-
-  if(NOT valid)
-    set(${bundle_var} "error: not a bundle" PARENT_SCOPE)
-    set(${executable_var} "error: not a bundle" PARENT_SCOPE)
-  endif()
-
-  set(${valid_var} ${valid} PARENT_SCOPE)
-endfunction()
-
-
-function(get_bundle_all_executables bundle exes_var)
-  set(exes "")
-
-  if(UNIX)
-    find_program(find_cmd "find")
-    mark_as_advanced(find_cmd)
-  endif()
-
-  # find command is much quicker than checking every file one by one on Unix
-  # which can take long time for large bundles, and since anyway we expect
-  # executable to have execute flag set we can narrow the list much quicker.
-  if(find_cmd)
-    execute_process(COMMAND "${find_cmd}" "${bundle}"
-      -type f \( -perm -0100 -o -perm -0010 -o -perm -0001 \)
-      OUTPUT_VARIABLE file_list
-      OUTPUT_STRIP_TRAILING_WHITESPACE
-      )
-    string(REPLACE "\n" ";" file_list "${file_list}")
-  else()
-    file(GLOB_RECURSE file_list "${bundle}/*")
-  endif()
-
-  foreach(f ${file_list})
-    is_file_executable("${f}" is_executable)
-    if(is_executable)
-      set(exes ${exes} "${f}")
-    endif()
-  endforeach()
-
-  set(${exes_var} "${exes}" PARENT_SCOPE)
-endfunction()
-
-
-function(get_item_rpaths item rpaths_var)
-  if(APPLE)
-    find_program(otool_cmd "otool")
-    mark_as_advanced(otool_cmd)
-  endif()
-
-  if(otool_cmd)
-    execute_process(
-      COMMAND "${otool_cmd}" -l "${item}"
-      OUTPUT_VARIABLE load_cmds_ov
-      )
-    string(REGEX REPLACE "[^\n]+cmd LC_RPATH\n[^\n]+\n[^\n]+path ([^\n]+) \\(offset[^\n]+\n" "rpath \\1\n" load_cmds_ov "${load_cmds_ov}")
-    string(REGEX MATCHALL "rpath [^\n]+" load_cmds_ov "${load_cmds_ov}")
-    string(REGEX REPLACE "rpath " "" load_cmds_ov "${load_cmds_ov}")
-    if(load_cmds_ov)
-      gp_append_unique(${rpaths_var} "${load_cmds_ov}")
-    endif()
-  endif()
-
-  set(${rpaths_var} ${${rpaths_var}} PARENT_SCOPE)
-endfunction()
-
-
-function(get_item_key item key_var)
-  get_filename_component(item_name "${item}" NAME)
-  if(WIN32)
-    string(TOLOWER "${item_name}" item_name)
-  endif()
-  string(REPLACE "." "_" ${key_var} "${item_name}")
-  set(${key_var} ${${key_var}} PARENT_SCOPE)
-endfunction()
-
-
-function(clear_bundle_keys keys_var)
-  foreach(key ${${keys_var}})
-    set(${key}_ITEM PARENT_SCOPE)
-    set(${key}_RESOLVED_ITEM PARENT_SCOPE)
-    set(${key}_DEFAULT_EMBEDDED_PATH PARENT_SCOPE)
-    set(${key}_EMBEDDED_ITEM PARENT_SCOPE)
-    set(${key}_RESOLVED_EMBEDDED_ITEM PARENT_SCOPE)
-    set(${key}_COPYFLAG PARENT_SCOPE)
-    set(${key}_RPATHS PARENT_SCOPE)
-  endforeach()
-  set(${keys_var} PARENT_SCOPE)
-endfunction()
-
-
-function(set_bundle_key_values keys_var context item exepath dirs copyflag)
-  set(rpaths "${ARGV6}")
-  get_filename_component(item_name "${item}" NAME)
-
-  get_item_key("${item}" key)
-
-  list(LENGTH ${keys_var} length_before)
-  gp_append_unique(${keys_var} "${key}")
-  list(LENGTH ${keys_var} length_after)
-
-  if(NOT length_before EQUAL length_after)
-    gp_resolve_item("${context}" "${item}" "${exepath}" "${dirs}" resolved_item "${rpaths}")
-
-    gp_item_default_embedded_path("${item}" default_embedded_path)
-
-    get_item_rpaths("${resolved_item}" item_rpaths)
-
-    if(item MATCHES "[^/]+\\.framework/")
-      # For frameworks, construct the name under the embedded path from the
-      # opening "${item_name}.framework/" to the closing "/${item_name}":
-      #
-      string(REGEX REPLACE "^.*(${item_name}.framework/.*/?${item_name}).*$" "${default_embedded_path}/\\1" embedded_item "${item}")
-    else()
-      # For other items, just use the same name as the original, but in the
-      # embedded path:
-      #
-      set(embedded_item "${default_embedded_path}/${item_name}")
-    endif()
-
-    # Replace @executable_path and resolve ".." references:
-    #
-    string(REPLACE "@executable_path" "${exepath}" resolved_embedded_item "${embedded_item}")
-    get_filename_component(resolved_embedded_item "${resolved_embedded_item}" ABSOLUTE)
-
-    # *But* -- if we are not copying, then force resolved_embedded_item to be
-    # the same as resolved_item. In the case of multiple executables in the
-    # original bundle, using the default_embedded_path results in looking for
-    # the resolved executable next to the main bundle executable. This is here
-    # so that exes in the other sibling directories (like "bin") get fixed up
-    # properly...
-    #
-    if(NOT copyflag)
-      set(resolved_embedded_item "${resolved_item}")
-    endif()
-
-    set(${keys_var} ${${keys_var}} PARENT_SCOPE)
-    set(${key}_ITEM "${item}" PARENT_SCOPE)
-    set(${key}_RESOLVED_ITEM "${resolved_item}" PARENT_SCOPE)
-    set(${key}_DEFAULT_EMBEDDED_PATH "${default_embedded_path}" PARENT_SCOPE)
-    set(${key}_EMBEDDED_ITEM "${embedded_item}" PARENT_SCOPE)
-    set(${key}_RESOLVED_EMBEDDED_ITEM "${resolved_embedded_item}" PARENT_SCOPE)
-    set(${key}_COPYFLAG "${copyflag}" PARENT_SCOPE)
-    set(${key}_RPATHS "${item_rpaths}" PARENT_SCOPE)
-    set(${key}_RDEP_RPATHS "${rpaths}" PARENT_SCOPE)
-  else()
-    #message("warning: item key '${key}' already in the list, subsequent references assumed identical to first")
-  endif()
-endfunction()
-
-
-function(get_bundle_keys app libs dirs keys_var)
-  set(${keys_var} PARENT_SCOPE)
-
-  get_bundle_and_executable("${app}" bundle executable valid)
-  if(valid)
-    # Always use the exepath of the main bundle executable for @executable_path
-    # replacements:
-    #
-    get_filename_component(exepath "${executable}" PATH)
-
-    # But do fixups on all executables in the bundle:
-    #
-    get_bundle_all_executables("${bundle}" exes)
-
-    # Set keys for main executable first:
-    #
-    set_bundle_key_values(${keys_var} "${executable}" "${executable}" "${exepath}" "${dirs}" 0)
-
-    # Get rpaths specified by main executable:
-    #
-    get_item_key("${executable}" executable_key)
-    set(main_rpaths "${${executable_key}_RPATHS}")
-
-    # For each extra lib, accumulate a key as well and then also accumulate
-    # any of its prerequisites. (Extra libs are typically dynamically loaded
-    # plugins: libraries that are prerequisites for full runtime functionality
-    # but that do not show up in otool -L output...)
-    #
-    foreach(lib ${libs})
-      set_bundle_key_values(${keys_var} "${lib}" "${lib}" "${exepath}" "${dirs}" 0 "${main_rpaths}")
-
-      set(prereqs "")
-      get_prerequisites("${lib}" prereqs 1 1 "${exepath}" "${dirs}" "${main_rpaths}")
-      foreach(pr ${prereqs})
-        set_bundle_key_values(${keys_var} "${lib}" "${pr}" "${exepath}" "${dirs}" 1 "${main_rpaths}")
-      endforeach()
-    endforeach()
-
-    # For each executable found in the bundle, accumulate keys as we go.
-    # The list of keys should be complete when all prerequisites of all
-    # binaries in the bundle have been analyzed.
-    #
-    foreach(exe ${exes})
-      # Main executable is scanned first above:
-      #
-      if(NOT "${exe}" STREQUAL "${executable}")
-        # Add the exe itself to the keys:
-        #
-        set_bundle_key_values(${keys_var} "${exe}" "${exe}" "${exepath}" "${dirs}" 0 "${main_rpaths}")
-
-        # Get rpaths specified by executable:
-        #
-        get_item_key("${exe}" exe_key)
-        set(exe_rpaths "${main_rpaths}" "${${exe_key}_RPATHS}")
-      else()
-        set(exe_rpaths "${main_rpaths}")
-      endif()
-
-      # Add each prerequisite to the keys:
-      #
-      set(prereqs "")
-      get_prerequisites("${exe}" prereqs 1 1 "${exepath}" "${dirs}" "${exe_rpaths}")
-      foreach(pr ${prereqs})
-        set_bundle_key_values(${keys_var} "${exe}" "${pr}" "${exepath}" "${dirs}" 1 "${exe_rpaths}")
-      endforeach()
-    endforeach()
-
-    # Propagate values to caller's scope:
-    #
-    set(${keys_var} ${${keys_var}} PARENT_SCOPE)
-    foreach(key ${${keys_var}})
-      set(${key}_ITEM "${${key}_ITEM}" PARENT_SCOPE)
-      set(${key}_RESOLVED_ITEM "${${key}_RESOLVED_ITEM}" PARENT_SCOPE)
-      set(${key}_DEFAULT_EMBEDDED_PATH "${${key}_DEFAULT_EMBEDDED_PATH}" PARENT_SCOPE)
-      set(${key}_EMBEDDED_ITEM "${${key}_EMBEDDED_ITEM}" PARENT_SCOPE)
-      set(${key}_RESOLVED_EMBEDDED_ITEM "${${key}_RESOLVED_EMBEDDED_ITEM}" PARENT_SCOPE)
-      set(${key}_COPYFLAG "${${key}_COPYFLAG}" PARENT_SCOPE)
-      set(${key}_RPATHS "${${key}_RPATHS}" PARENT_SCOPE)
-      set(${key}_RDEP_RPATHS "${${key}_RDEP_RPATHS}" PARENT_SCOPE)
-    endforeach()
-  endif()
-endfunction()
-
-
-function(copy_resolved_item_into_bundle resolved_item resolved_embedded_item)
-  if(WIN32)
-    # ignore case on Windows
-    string(TOLOWER "${resolved_item}" resolved_item_compare)
-    string(TOLOWER "${resolved_embedded_item}" resolved_embedded_item_compare)
-  else()
-    set(resolved_item_compare "${resolved_item}")
-    set(resolved_embedded_item_compare "${resolved_embedded_item}")
-  endif()
-
-  if("${resolved_item_compare}" STREQUAL "${resolved_embedded_item_compare}")
-    message(STATUS "warning: resolved_item == resolved_embedded_item - not copying...")
-  else()
-    #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy ${resolved_item} ${resolved_embedded_item}")
-    execute_process(COMMAND ${CMAKE_COMMAND} -E copy "${resolved_item}" "${resolved_embedded_item}")
-    if(UNIX AND NOT APPLE)
-      file(RPATH_REMOVE FILE "${resolved_embedded_item}")
-    endif()
-  endif()
-
-endfunction()
-
-
-function(copy_resolved_framework_into_bundle resolved_item resolved_embedded_item)
-  if(WIN32)
-    # ignore case on Windows
-    string(TOLOWER "${resolved_item}" resolved_item_compare)
-    string(TOLOWER "${resolved_embedded_item}" resolved_embedded_item_compare)
-  else()
-    set(resolved_item_compare "${resolved_item}")
-    set(resolved_embedded_item_compare "${resolved_embedded_item}")
-  endif()
-
-  if("${resolved_item_compare}" STREQUAL "${resolved_embedded_item_compare}")
-    message(STATUS "warning: resolved_item == resolved_embedded_item - not copying...")
-  else()
-    if(BU_COPY_FULL_FRAMEWORK_CONTENTS)
-      # Full Framework (everything):
-      get_filename_component(resolved_dir "${resolved_item}" PATH)
-      get_filename_component(resolved_dir "${resolved_dir}/../.." ABSOLUTE)
-      get_filename_component(resolved_embedded_dir "${resolved_embedded_item}" PATH)
-      get_filename_component(resolved_embedded_dir "${resolved_embedded_dir}/../.." ABSOLUTE)
-      #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy_directory '${resolved_dir}' '${resolved_embedded_dir}'")
-      execute_process(COMMAND ${CMAKE_COMMAND} -E copy_directory "${resolved_dir}" "${resolved_embedded_dir}")
-    else()
-      # Framework lib itself:
-      #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy ${resolved_item} ${resolved_embedded_item}")
-      execute_process(COMMAND ${CMAKE_COMMAND} -E copy "${resolved_item}" "${resolved_embedded_item}")
-
-      # Plus Resources, if they exist:
-      string(REGEX REPLACE "^(.*)/[^/]+$" "\\1/Resources" resolved_resources "${resolved_item}")
-      string(REGEX REPLACE "^(.*)/[^/]+$" "\\1/Resources" resolved_embedded_resources "${resolved_embedded_item}")
-      if(EXISTS "${resolved_resources}")
-        #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy_directory '${resolved_resources}' '${resolved_embedded_resources}'")
-        execute_process(COMMAND ${CMAKE_COMMAND} -E copy_directory "${resolved_resources}" "${resolved_embedded_resources}")
-      endif()
-
-      # Some frameworks e.g. Qt put Info.plist in wrong place, so when it is
-      # missing in resources, copy it from other well known incorrect locations:
-      if(NOT EXISTS "${resolved_resources}/Info.plist")
-        # Check for Contents/Info.plist in framework root (older Qt SDK):
-        string(REGEX REPLACE "^(.*)/[^/]+/[^/]+/[^/]+$" "\\1/Contents/Info.plist" resolved_info_plist "${resolved_item}")
-        string(REGEX REPLACE "^(.*)/[^/]+$" "\\1/Resources/Info.plist" resolved_embedded_info_plist "${resolved_embedded_item}")
-        if(EXISTS "${resolved_info_plist}")
-          #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy_directory '${resolved_info_plist}' '${resolved_embedded_info_plist}'")
-          execute_process(COMMAND ${CMAKE_COMMAND} -E copy "${resolved_info_plist}" "${resolved_embedded_info_plist}")
-        endif()
-      endif()
-
-      # Check if framework is versioned and fix it layout
-      string(REGEX REPLACE "^.*/([^/]+)/[^/]+$" "\\1" resolved_embedded_version "${resolved_embedded_item}")
-      string(REGEX REPLACE "^(.*)/[^/]+/[^/]+$" "\\1" resolved_embedded_versions "${resolved_embedded_item}")
-      string(REGEX REPLACE "^.*/([^/]+)/[^/]+/[^/]+$" "\\1" resolved_embedded_versions_basename "${resolved_embedded_item}")
-      if(resolved_embedded_versions_basename STREQUAL "Versions")
-        # Ensure Current symlink points to the framework version
-        if(NOT EXISTS "${resolved_embedded_versions}/Current")
-          execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "${resolved_embedded_version}" "${resolved_embedded_versions}/Current")
-        endif()
-        # Restore symlinks in framework root pointing to current framework
-        # binary and resources:
-        string(REGEX REPLACE "^(.*)/[^/]+/[^/]+/[^/]+$" "\\1" resolved_embedded_root "${resolved_embedded_item}")
-        string(REGEX REPLACE "^.*/([^/]+)$" "\\1" resolved_embedded_item_basename "${resolved_embedded_item}")
-        if(NOT EXISTS "${resolved_embedded_root}/${resolved_embedded_item_basename}")
-          execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "Versions/Current/${resolved_embedded_item_basename}" "${resolved_embedded_root}/${resolved_embedded_item_basename}")
-        endif()
-        if(NOT EXISTS "${resolved_embedded_root}/Resources")
-          execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "Versions/Current/Resources" "${resolved_embedded_root}/Resources")
-        endif()
-      endif()
-    endif()
-    if(UNIX AND NOT APPLE)
-      file(RPATH_REMOVE FILE "${resolved_embedded_item}")
-    endif()
-  endif()
-
-endfunction()
-
-
-function(fixup_bundle_item resolved_embedded_item exepath dirs)
-  # This item's key is "ikey":
-  #
-  get_item_key("${resolved_embedded_item}" ikey)
-
-  # Ensure the item is "inside the .app bundle" -- it should not be fixed up if
-  # it is not in the .app bundle... Otherwise, we'll modify files in the build
-  # tree, or in other varied locations around the file system, with our call to
-  # install_name_tool. Make sure that doesn't happen here:
-  #
-  get_dotapp_dir("${exepath}" exe_dotapp_dir)
-  string(LENGTH "${exe_dotapp_dir}/" exe_dotapp_dir_length)
-  string(LENGTH "${resolved_embedded_item}" resolved_embedded_item_length)
-  set(path_too_short 0)
-  set(is_embedded 0)
-  if(${resolved_embedded_item_length} LESS ${exe_dotapp_dir_length})
-    set(path_too_short 1)
-  endif()
-  if(NOT path_too_short)
-    string(SUBSTRING "${resolved_embedded_item}" 0 ${exe_dotapp_dir_length} item_substring)
-    if("${exe_dotapp_dir}/" STREQUAL "${item_substring}")
-      set(is_embedded 1)
-    endif()
-  endif()
-  if(NOT is_embedded)
-    message("  exe_dotapp_dir/='${exe_dotapp_dir}/'")
-    message("  item_substring='${item_substring}'")
-    message("  resolved_embedded_item='${resolved_embedded_item}'")
-    message("")
-    message("Install or copy the item into the bundle before calling fixup_bundle.")
-    message("Or maybe there's a typo or incorrect path in one of the args to fixup_bundle?")
-    message("")
-    message(FATAL_ERROR "cannot fixup an item that is not in the bundle...")
-  endif()
-
-  set(rpaths "${${ikey}_RPATHS}" "${${ikey}_RDEP_RPATHS}")
-
-  set(prereqs "")
-  get_prerequisites("${resolved_embedded_item}" prereqs 1 0 "${exepath}" "${dirs}" "${rpaths}")
-
-  set(changes "")
-
-  foreach(pr ${prereqs})
-    # Each referenced item's key is "rkey" in the loop:
-    #
-    get_item_key("${pr}" rkey)
-
-    if(NOT "${${rkey}_EMBEDDED_ITEM}" STREQUAL "")
-      set(changes ${changes} "-change" "${pr}" "${${rkey}_EMBEDDED_ITEM}")
-    else()
-      message("warning: unexpected reference to '${pr}'")
-    endif()
-  endforeach()
-
-  if(BU_CHMOD_BUNDLE_ITEMS)
-    execute_process(COMMAND chmod u+w "${resolved_embedded_item}")
-  endif()
-
-  # Only if install_name_tool supports -delete_rpath:
-  #
-  execute_process(COMMAND install_name_tool
-    OUTPUT_VARIABLE install_name_tool_usage
-    ERROR_VARIABLE  install_name_tool_usage
-    )
-  if(install_name_tool_usage MATCHES ".*-delete_rpath.*")
-    foreach(rpath ${${ikey}_RPATHS})
-      set(changes ${changes} -delete_rpath "${rpath}")
-    endforeach()
-  endif()
-
-  if(${ikey}_EMBEDDED_ITEM)
-    set(changes ${changes} -id "${${ikey}_EMBEDDED_ITEM}")
-  endif()
-
-  # Change this item's id and all of its references in one call
-  # to install_name_tool:
-  #
-  if(changes)
-    execute_process(COMMAND install_name_tool ${changes} "${resolved_embedded_item}")
-  endif()
-endfunction()
-
-
-function(fixup_bundle app libs dirs)
-  message(STATUS "fixup_bundle")
-  message(STATUS "  app='${app}'")
-  message(STATUS "  libs='${libs}'")
-  message(STATUS "  dirs='${dirs}'")
-
-  get_bundle_and_executable("${app}" bundle executable valid)
-  if(valid)
-    get_filename_component(exepath "${executable}" PATH)
-
-    message(STATUS "fixup_bundle: preparing...")
-    get_bundle_keys("${app}" "${libs}" "${dirs}" keys)
-
-    message(STATUS "fixup_bundle: copying...")
-    list(LENGTH keys n)
-    math(EXPR n ${n}*2)
-
-    set(i 0)
-    foreach(key ${keys})
-      math(EXPR i ${i}+1)
-      if(${${key}_COPYFLAG})
-        message(STATUS "${i}/${n}: copying '${${key}_RESOLVED_ITEM}'")
-      else()
-        message(STATUS "${i}/${n}: *NOT* copying '${${key}_RESOLVED_ITEM}'")
-      endif()
-
-      set(show_status 0)
-      if(show_status)
-        message(STATUS "key='${key}'")
-        message(STATUS "item='${${key}_ITEM}'")
-        message(STATUS "resolved_item='${${key}_RESOLVED_ITEM}'")
-        message(STATUS "default_embedded_path='${${key}_DEFAULT_EMBEDDED_PATH}'")
-        message(STATUS "embedded_item='${${key}_EMBEDDED_ITEM}'")
-        message(STATUS "resolved_embedded_item='${${key}_RESOLVED_EMBEDDED_ITEM}'")
-        message(STATUS "copyflag='${${key}_COPYFLAG}'")
-        message(STATUS "")
-      endif()
-
-      if(${${key}_COPYFLAG})
-        set(item "${${key}_ITEM}")
-        if(item MATCHES "[^/]+\\.framework/")
-          copy_resolved_framework_into_bundle("${${key}_RESOLVED_ITEM}"
-            "${${key}_RESOLVED_EMBEDDED_ITEM}")
-        else()
-          copy_resolved_item_into_bundle("${${key}_RESOLVED_ITEM}"
-            "${${key}_RESOLVED_EMBEDDED_ITEM}")
-        endif()
-      endif()
-    endforeach()
-
-    message(STATUS "fixup_bundle: fixing...")
-    foreach(key ${keys})
-      math(EXPR i ${i}+1)
-      if(APPLE)
-        message(STATUS "${i}/${n}: fixing up '${${key}_RESOLVED_EMBEDDED_ITEM}'")
-        fixup_bundle_item("${${key}_RESOLVED_EMBEDDED_ITEM}" "${exepath}" "${dirs}")
-      else()
-        message(STATUS "${i}/${n}: fix-up not required on this platform '${${key}_RESOLVED_EMBEDDED_ITEM}'")
-      endif()
-    endforeach()
-
-    message(STATUS "fixup_bundle: cleaning up...")
-    clear_bundle_keys(keys)
-
-    message(STATUS "fixup_bundle: verifying...")
-    verify_app("${app}")
-  else()
-    message(SEND_ERROR "error: fixup_bundle: not a valid bundle")
-  endif()
-
-  message(STATUS "fixup_bundle: done")
-endfunction()
-
-
-function(copy_and_fixup_bundle src dst libs dirs)
-  execute_process(COMMAND ${CMAKE_COMMAND} -E copy_directory "${src}" "${dst}")
-  fixup_bundle("${dst}" "${libs}" "${dirs}")
-endfunction()
-
-
-function(verify_bundle_prerequisites bundle result_var info_var)
-  set(result 1)
-  set(info "")
-  set(count 0)
-
-  get_bundle_main_executable("${bundle}" main_bundle_exe)
-
-  get_bundle_all_executables("${bundle}" file_list)
-  foreach(f ${file_list})
-      get_filename_component(exepath "${f}" PATH)
-      math(EXPR count "${count} + 1")
-
-      message(STATUS "executable file ${count}: ${f}")
-
-      set(prereqs "")
-      get_prerequisites("${f}" prereqs 1 1 "${exepath}" "")
-
-      # On the Mac,
-      # "embedded" and "system" prerequisites are fine... anything else means
-      # the bundle's prerequisites are not verified (i.e., the bundle is not
-      # really "standalone")
-      #
-      # On Windows (and others? Linux/Unix/...?)
-      # "local" and "system" prereqs are fine...
-      #
-      set(external_prereqs "")
-
-      foreach(p ${prereqs})
-        set(p_type "")
-        gp_file_type("${f}" "${p}" p_type)
-
-        if(APPLE)
-          if(NOT "${p_type}" STREQUAL "embedded" AND NOT "${p_type}" STREQUAL "system")
-            set(external_prereqs ${external_prereqs} "${p}")
-          endif()
-        else()
-          if(NOT "${p_type}" STREQUAL "local" AND NOT "${p_type}" STREQUAL "system")
-            set(external_prereqs ${external_prereqs} "${p}")
-          endif()
-        endif()
-      endforeach()
-
-      if(external_prereqs)
-        # Found non-system/somehow-unacceptable prerequisites:
-        set(result 0)
-        set(info ${info} "external prerequisites found:\nf='${f}'\nexternal_prereqs='${external_prereqs}'\n")
-      endif()
-  endforeach()
-
-  if(result)
-    set(info "Verified ${count} executable files in '${bundle}'")
-  endif()
-
-  set(${result_var} "${result}" PARENT_SCOPE)
-  set(${info_var} "${info}" PARENT_SCOPE)
-endfunction()
-
-
-function(verify_bundle_symlinks bundle result_var info_var)
-  set(result 1)
-  set(info "")
-  set(count 0)
-
-  # TODO: implement this function for real...
-  # Right now, it is just a stub that verifies unconditionally...
-
-  set(${result_var} "${result}" PARENT_SCOPE)
-  set(${info_var} "${info}" PARENT_SCOPE)
-endfunction()
-
-
-function(verify_app app)
-  set(verified 0)
-  set(info "")
-
-  get_bundle_and_executable("${app}" bundle executable valid)
-
-  message(STATUS "===========================================================================")
-  message(STATUS "Analyzing app='${app}'")
-  message(STATUS "bundle='${bundle}'")
-  message(STATUS "executable='${executable}'")
-  message(STATUS "valid='${valid}'")
-
-  # Verify that the bundle does not have any "external" prerequisites:
-  #
-  verify_bundle_prerequisites("${bundle}" verified info)
-  message(STATUS "verified='${verified}'")
-  message(STATUS "info='${info}'")
-  message(STATUS "")
-
-  if(verified)
-    # Verify that the bundle does not have any symlinks to external files:
-    #
-    verify_bundle_symlinks("${bundle}" verified info)
-    message(STATUS "verified='${verified}'")
-    message(STATUS "info='${info}'")
-    message(STATUS "")
-  endif()
-
-  if(NOT verified)
-    message(FATAL_ERROR "error: verify_app failed")
-  endif()
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeASM-ATTInformation.cmake b/share/cmake-3.2/Modules/CMakeASM-ATTInformation.cmake
deleted file mode 100644
index 675c13b..0000000
--- a/share/cmake-3.2/Modules/CMakeASM-ATTInformation.cmake
+++ /dev/null
@@ -1,25 +0,0 @@
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# support for AT&T syntax assemblers, e.g. GNU as
-
-set(ASM_DIALECT "-ATT")
-# *.S files are supposed to be preprocessed, so they should not be passed to
-# assembler but should be processed by gcc
-set(CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS s;asm)
-
-set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <FLAGS> -o <OBJECT> <SOURCE>")
-
-include(CMakeASMInformation)
-set(ASM_DIALECT)
diff --git a/share/cmake-3.2/Modules/CMakeASMInformation.cmake b/share/cmake-3.2/Modules/CMakeASMInformation.cmake
deleted file mode 100644
index 62ef972..0000000
--- a/share/cmake-3.2/Modules/CMakeASMInformation.cmake
+++ /dev/null
@@ -1,148 +0,0 @@
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(UNIX)
-  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .o)
-else()
-  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .obj)
-endif()
-
-set(CMAKE_INCLUDE_FLAG_ASM${ASM_DIALECT} "-I")       # -I
-set(CMAKE_BASE_NAME)
-get_filename_component(CMAKE_BASE_NAME "${CMAKE_ASM${ASM_DIALECT}_COMPILER}" NAME_WE)
-
-if("${CMAKE_BASE_NAME}" STREQUAL "as")
-  set(CMAKE_BASE_NAME gas)
-endif()
-
-# Load compiler-specific information.
-set(_INCLUDED_FILE "")
-if(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
-  include(Compiler/${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT} OPTIONAL  RESULT_VARIABLE _INCLUDED_FILE)
-endif()
-if(NOT _INCLUDED_FILE)
-  if("ASM${ASM_DIALECT}" STREQUAL "ASM")
-    message(STATUS "Warning: Did not find file Compiler/${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT}")
-  endif()
-  include(Platform/${CMAKE_BASE_NAME} OPTIONAL)
-endif()
-
-if(CMAKE_SYSTEM_PROCESSOR)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL  RESULT_VARIABLE _INCLUDED_FILE)
-  if(NOT _INCLUDED_FILE)
-    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL)
-  endif()
-endif()
-
-include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT} OPTIONAL  RESULT_VARIABLE _INCLUDED_FILE)
-if(NOT _INCLUDED_FILE)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL)
-endif()
-
-# This should be included before the _INIT variables are
-# used to initialize the cache.  Since the rule variables
-# have if blocks on them, users can still define them here.
-# But, it should still be after the platform file so changes can
-# be made to those values.
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
-endif()
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE_ASM)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_ASM} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE_ASM "${_override}")
-endif()
-
-# Set default assembler file extensions:
-if(NOT CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS)
-  set(CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS s;S;asm)
-endif()
-
-
-# Support for CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT and friends:
-set(CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT "$ENV{ASM${ASM_DIALECT}FLAGS} ${CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT}")
-# avoid just having a space as the initial value for the cache
-if(CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT STREQUAL " ")
-  set(CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT)
-endif()
-set (CMAKE_ASM${ASM_DIALECT}_FLAGS "${CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT}" CACHE STRING
-     "Flags used by the assembler during all build types.")
-
-if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
-# default build type is none
-  if(NOT CMAKE_NO_BUILD_TYPE)
-    set (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING
-      "Choose the type of build, options are: None, Debug Release RelWithDebInfo MinSizeRel.")
-  endif()
-  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_DEBUG "${CMAKE_ASM${ASM_DIALECT}_FLAGS_DEBUG_INIT}" CACHE STRING
-    "Flags used by the assembler during debug builds.")
-  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_MINSIZEREL "${CMAKE_ASM${ASM_DIALECT}_FLAGS_MINSIZEREL_INIT}" CACHE STRING
-    "Flags used by the assembler during release minsize builds.")
-  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_RELEASE "${CMAKE_ASM${ASM_DIALECT}_FLAGS_RELEASE_INIT}" CACHE STRING
-    "Flags used by the assembler during release builds.")
-  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_RELWITHDEBINFO "${CMAKE_ASM${ASM_DIALECT}_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
-    "Flags used by the assembler during Release with Debug Info builds.")
-endif()
-
-mark_as_advanced(CMAKE_ASM${ASM_DIALECT}_FLAGS
-                 CMAKE_ASM${ASM_DIALECT}_FLAGS_DEBUG
-                 CMAKE_ASM${ASM_DIALECT}_FLAGS_MINSIZEREL
-                 CMAKE_ASM${ASM_DIALECT}_FLAGS_RELEASE
-                 CMAKE_ASM${ASM_DIALECT}_FLAGS_RELWITHDEBINFO
-                )
-
-
-if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT)
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <DEFINES> <FLAGS> -o <OBJECT> -c <SOURCE>")
-endif()
-
-if(NOT CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY)
-  set(CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY
-      "<CMAKE_AR> cr <TARGET> <LINK_FLAGS> <OBJECTS> "
-      "<CMAKE_RANLIB> <TARGET> ")
-endif()
-
-if(NOT CMAKE_ASM${ASM_DIALECT}_LINK_EXECUTABLE)
-  set(CMAKE_ASM${ASM_DIALECT}_LINK_EXECUTABLE
-    "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <FLAGS> <CMAKE_ASM${ASM_DIALECT}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG)
-  set(CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_ASM${ASM_DIALECT}_FLAG})
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG_SEP)
-  set(CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_ASM${ASM_DIALECT}_FLAG_SEP})
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RPATH_LINK_ASM${ASM_DIALECT}_FLAG)
-  set(CMAKE_EXECUTABLE_RPATH_LINK_ASM${ASM_DIALECT}_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_ASM${ASM_DIALECT}_FLAG})
-endif()
-
-# to be done
-if(NOT CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_LIBRARY)
-  set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_LIBRARY)
-endif()
-
-if(NOT CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_MODULE)
-  set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_MODULE)
-endif()
-
-
-set(CMAKE_ASM${ASM_DIALECT}_INFOMATION_LOADED 1)
-
diff --git a/share/cmake-3.2/Modules/CMakeASM_MASMInformation.cmake b/share/cmake-3.2/Modules/CMakeASM_MASMInformation.cmake
deleted file mode 100644
index 972883c..0000000
--- a/share/cmake-3.2/Modules/CMakeASM_MASMInformation.cmake
+++ /dev/null
@@ -1,24 +0,0 @@
-
-#=============================================================================
-# Copyright 2008-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# support for the MS assembler, masm and masm64
-
-set(ASM_DIALECT "_MASM")
-
-set(CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS asm)
-
-set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <DEFINES> <FLAGS> /c  /Fo <OBJECT> <SOURCE>")
-
-include(CMakeASMInformation)
-set(ASM_DIALECT)
diff --git a/share/cmake-3.2/Modules/CMakeASM_NASMInformation.cmake b/share/cmake-3.2/Modules/CMakeASM_NASMInformation.cmake
deleted file mode 100644
index 7058fc7..0000000
--- a/share/cmake-3.2/Modules/CMakeASM_NASMInformation.cmake
+++ /dev/null
@@ -1,46 +0,0 @@
-
-#=============================================================================
-# Copyright 2010 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# support for the nasm assembler
-
-set(CMAKE_ASM_NASM_SOURCE_FILE_EXTENSIONS nasm asm)
-
-if(NOT CMAKE_ASM_NASM_OBJECT_FORMAT)
-  if(WIN32)
-    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
-      set(CMAKE_ASM_NASM_OBJECT_FORMAT win64)
-    else()
-      set(CMAKE_ASM_NASM_OBJECT_FORMAT win32)
-    endif()
-  elseif(APPLE)
-    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
-      set(CMAKE_ASM_NASM_OBJECT_FORMAT macho64)
-    else()
-      set(CMAKE_ASM_NASM_OBJECT_FORMAT macho)
-    endif()
-  else()
-    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
-      set(CMAKE_ASM_NASM_OBJECT_FORMAT elf64)
-    else()
-      set(CMAKE_ASM_NASM_OBJECT_FORMAT elf)
-    endif()
-  endif()
-endif()
-
-set(CMAKE_ASM_NASM_COMPILE_OBJECT "<CMAKE_ASM_NASM_COMPILER> <FLAGS> -f ${CMAKE_ASM_NASM_OBJECT_FORMAT} -o <OBJECT> <SOURCE>")
-
-# Load the generic ASMInformation file:
-set(ASM_DIALECT "_NASM")
-include(CMakeASMInformation)
-set(ASM_DIALECT)
diff --git a/share/cmake-3.2/Modules/CMakeBackwardCompatibilityC.cmake b/share/cmake-3.2/Modules/CMakeBackwardCompatibilityC.cmake
deleted file mode 100644
index 4783d68..0000000
--- a/share/cmake-3.2/Modules/CMakeBackwardCompatibilityC.cmake
+++ /dev/null
@@ -1,100 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Nothing here yet
-if(CMAKE_GENERATOR MATCHES "Visual Studio 7")
-  include(CMakeVS7BackwardCompatibility)
-  set(CMAKE_SKIP_COMPATIBILITY_TESTS 1)
-endif()
-if(CMAKE_GENERATOR MATCHES "Visual Studio 6")
-  include(CMakeVS6BackwardCompatibility)
-  set(CMAKE_SKIP_COMPATIBILITY_TESTS 1)
-endif()
-
-if(NOT CMAKE_SKIP_COMPATIBILITY_TESTS)
-  # Old CMake versions did not support OS X universal binaries anyway,
-  # so just get through this with at least some size for the types.
-  list(LENGTH CMAKE_OSX_ARCHITECTURES NUM_ARCHS)
-  if(${NUM_ARCHS} GREATER 1)
-    if(NOT DEFINED CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
-      message(WARNING "This module does not work with OS X universal binaries.")
-      set(__ERASE_CMAKE_TRY_COMPILE_OSX_ARCHITECTURES 1)
-      list(GET CMAKE_OSX_ARCHITECTURES 0 CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
-    endif()
-  endif()
-
-  include (CheckTypeSize)
-  CHECK_TYPE_SIZE(int      CMAKE_SIZEOF_INT)
-  CHECK_TYPE_SIZE(long     CMAKE_SIZEOF_LONG)
-  CHECK_TYPE_SIZE("void*"  CMAKE_SIZEOF_VOID_P)
-  CHECK_TYPE_SIZE(char     CMAKE_SIZEOF_CHAR)
-  CHECK_TYPE_SIZE(short    CMAKE_SIZEOF_SHORT)
-  CHECK_TYPE_SIZE(float    CMAKE_SIZEOF_FLOAT)
-  CHECK_TYPE_SIZE(double   CMAKE_SIZEOF_DOUBLE)
-
-  include (CheckIncludeFile)
-  CHECK_INCLUDE_FILE("limits.h"       CMAKE_HAVE_LIMITS_H)
-  CHECK_INCLUDE_FILE("unistd.h"       CMAKE_HAVE_UNISTD_H)
-  CHECK_INCLUDE_FILE("pthread.h"      CMAKE_HAVE_PTHREAD_H)
-
-  include (CheckIncludeFiles)
-  CHECK_INCLUDE_FILES("sys/types.h;sys/prctl.h"    CMAKE_HAVE_SYS_PRCTL_H)
-
-  include (TestBigEndian)
-  TEST_BIG_ENDIAN(CMAKE_WORDS_BIGENDIAN)
-  include (FindX11)
-
-  if("${X11_X11_INCLUDE_PATH}" STREQUAL "/usr/include")
-    set (CMAKE_X_CFLAGS "" CACHE STRING "X11 extra flags.")
-  else()
-    set (CMAKE_X_CFLAGS "-I${X11_X11_INCLUDE_PATH}" CACHE STRING
-         "X11 extra flags.")
-  endif()
-  set (CMAKE_X_LIBS "${X11_LIBRARIES}" CACHE STRING
-       "Libraries and options used in X11 programs.")
-  set (CMAKE_HAS_X "${X11_FOUND}" CACHE INTERNAL "Is X11 around.")
-
-  include (FindThreads)
-
-  set (CMAKE_THREAD_LIBS        "${CMAKE_THREAD_LIBS_INIT}" CACHE STRING
-    "Thread library used.")
-
-  set (CMAKE_USE_PTHREADS       "${CMAKE_USE_PTHREADS_INIT}" CACHE BOOL
-     "Use the pthreads library.")
-
-  set (CMAKE_USE_WIN32_THREADS  "${CMAKE_USE_WIN32_THREADS_INIT}" CACHE BOOL
-       "Use the win32 thread library.")
-
-  set (CMAKE_HP_PTHREADS        ${CMAKE_HP_PTHREADS_INIT} CACHE BOOL
-     "Use HP pthreads.")
-
-  set (CMAKE_USE_SPROC          ${CMAKE_USE_SPROC_INIT} CACHE BOOL
-     "Use sproc libs.")
-
-  if(__ERASE_CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
-    set(CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
-    set(__ERASE_CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
-  endif()
-endif()
-
-mark_as_advanced(
-CMAKE_HP_PTHREADS
-CMAKE_THREAD_LIBS
-CMAKE_USE_PTHREADS
-CMAKE_USE_SPROC
-CMAKE_USE_WIN32_THREADS
-CMAKE_X_CFLAGS
-CMAKE_X_LIBS
-)
-
diff --git a/share/cmake-3.2/Modules/CMakeCCompiler.cmake.in b/share/cmake-3.2/Modules/CMakeCCompiler.cmake.in
deleted file mode 100644
index 86cd894..0000000
--- a/share/cmake-3.2/Modules/CMakeCCompiler.cmake.in
+++ /dev/null
@@ -1,63 +0,0 @@
-set(CMAKE_C_COMPILER "@CMAKE_C_COMPILER@")
-set(CMAKE_C_COMPILER_ARG1 "@CMAKE_C_COMPILER_ARG1@")
-set(CMAKE_C_COMPILER_ID "@CMAKE_C_COMPILER_ID@")
-set(CMAKE_C_COMPILER_VERSION "@CMAKE_C_COMPILER_VERSION@")
-set(CMAKE_C_COMPILE_FEATURES "@CMAKE_C_COMPILE_FEATURES@")
-set(CMAKE_C90_COMPILE_FEATURES "@CMAKE_C90_COMPILE_FEATURES@")
-set(CMAKE_C99_COMPILE_FEATURES "@CMAKE_C99_COMPILE_FEATURES@")
-set(CMAKE_C11_COMPILE_FEATURES "@CMAKE_C11_COMPILE_FEATURES@")
-
-set(CMAKE_C_PLATFORM_ID "@CMAKE_C_PLATFORM_ID@")
-set(CMAKE_C_SIMULATE_ID "@CMAKE_C_SIMULATE_ID@")
-set(CMAKE_C_SIMULATE_VERSION "@CMAKE_C_SIMULATE_VERSION@")
-@SET_MSVC_C_ARCHITECTURE_ID@
-set(CMAKE_AR "@CMAKE_AR@")
-set(CMAKE_RANLIB "@CMAKE_RANLIB@")
-set(CMAKE_LINKER "@CMAKE_LINKER@")
-set(CMAKE_COMPILER_IS_GNUCC @CMAKE_COMPILER_IS_GNUCC@)
-set(CMAKE_C_COMPILER_LOADED 1)
-set(CMAKE_C_COMPILER_WORKS @CMAKE_C_COMPILER_WORKS@)
-set(CMAKE_C_ABI_COMPILED @CMAKE_C_ABI_COMPILED@)
-set(CMAKE_COMPILER_IS_MINGW @CMAKE_COMPILER_IS_MINGW@)
-set(CMAKE_COMPILER_IS_CYGWIN @CMAKE_COMPILER_IS_CYGWIN@)
-if(CMAKE_COMPILER_IS_CYGWIN)
-  set(CYGWIN 1)
-  set(UNIX 1)
-endif()
-
-set(CMAKE_C_COMPILER_ENV_VAR "CC")
-
-if(CMAKE_COMPILER_IS_MINGW)
-  set(MINGW 1)
-endif()
-set(CMAKE_C_COMPILER_ID_RUN 1)
-set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
-set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
-set(CMAKE_C_LINKER_PREFERENCE 10)
-
-# Save compiler ABI information.
-set(CMAKE_C_SIZEOF_DATA_PTR "@CMAKE_C_SIZEOF_DATA_PTR@")
-set(CMAKE_C_COMPILER_ABI "@CMAKE_C_COMPILER_ABI@")
-set(CMAKE_C_LIBRARY_ARCHITECTURE "@CMAKE_C_LIBRARY_ARCHITECTURE@")
-
-if(CMAKE_C_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_C_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
-endif()
-
-if(CMAKE_C_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "@CMAKE_C_LIBRARY_ARCHITECTURE@")
-endif()
-
-@CMAKE_C_SYSROOT_FLAG_CODE@
-@CMAKE_C_OSX_DEPLOYMENT_TARGET_FLAG_CODE@
-
-set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "@CMAKE_C_IMPLICIT_LINK_LIBRARIES@")
-set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "@CMAKE_C_IMPLICIT_LINK_DIRECTORIES@")
-set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "@CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES@")
-
-@SET_CMAKE_CMCLDEPS_EXECUTABLE@
-@SET_CMAKE_CL_SHOWINCLUDES_PREFIX@
diff --git a/share/cmake-3.2/Modules/CMakeCCompilerABI.c b/share/cmake-3.2/Modules/CMakeCCompilerABI.c
deleted file mode 100644
index e6a07f4..0000000
--- a/share/cmake-3.2/Modules/CMakeCCompilerABI.c
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifdef __cplusplus
-# error "A C++ compiler has been selected for C."
-#endif
-
-#ifdef __CLASSIC_C__
-# define const
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-#include "CMakeCompilerABI.h"
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef __CLASSIC_C__
-int main(argc, argv) int argc; char *argv[];
-#else
-int main(int argc, char *argv[])
-#endif
-{
-  int require = 0;
-  require += info_sizeof_dptr[argc];
-#if defined(ABI_ID)
-  require += info_abi[argc];
-#endif
-  (void)argv;
-  return require;
-}
diff --git a/share/cmake-3.2/Modules/CMakeCCompilerId.c.in b/share/cmake-3.2/Modules/CMakeCCompilerId.c.in
deleted file mode 100644
index 09ae509..0000000
--- a/share/cmake-3.2/Modules/CMakeCCompilerId.c.in
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifdef __cplusplus
-# error "A C++ compiler has been selected for C."
-#endif
-
-#if defined(__18CXX)
-# define ID_VOID_MAIN
-#endif
-
-@CMAKE_C_COMPILER_ID_CONTENT@
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-@CMAKE_C_COMPILER_ID_PLATFORM_CONTENT@
-@CMAKE_C_COMPILER_ID_ERROR_FOR_TEST@
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef ID_VOID_MAIN
-void main() {}
-#else
-int main(int argc, char* argv[])
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-  (void)argv;
-  return require;
-}
-#endif
diff --git a/share/cmake-3.2/Modules/CMakeCInformation.cmake b/share/cmake-3.2/Modules/CMakeCInformation.cmake
deleted file mode 100644
index 332b26e..0000000
--- a/share/cmake-3.2/Modules/CMakeCInformation.cmake
+++ /dev/null
@@ -1,219 +0,0 @@
-
-#=============================================================================
-# Copyright 2004-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This file sets the basic flags for the C language in CMake.
-# It also loads the available platform file for the system-compiler
-# if it exists.
-# It also loads a system - compiler - processor (or target hardware)
-# specific file, which is mainly useful for crosscompiling and embedded systems.
-
-# some compilers use different extensions (e.g. sdcc uses .rel)
-# so set the extension here first so it can be overridden by the compiler specific file
-if(UNIX)
-  set(CMAKE_C_OUTPUT_EXTENSION .o)
-else()
-  set(CMAKE_C_OUTPUT_EXTENSION .obj)
-endif()
-
-set(_INCLUDED_FILE 0)
-
-# Load compiler-specific information.
-if(CMAKE_C_COMPILER_ID)
-  include(Compiler/${CMAKE_C_COMPILER_ID}-C OPTIONAL)
-endif()
-
-set(CMAKE_BASE_NAME)
-get_filename_component(CMAKE_BASE_NAME "${CMAKE_C_COMPILER}" NAME_WE)
-if(CMAKE_COMPILER_IS_GNUCC)
-  set(CMAKE_BASE_NAME gcc)
-endif()
-
-
-# load a hardware specific file, mostly useful for embedded compilers
-if(CMAKE_SYSTEM_PROCESSOR)
-  if(CMAKE_C_COMPILER_ID)
-    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_C_COMPILER_ID}-C-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
-  endif()
-  if (NOT _INCLUDED_FILE)
-    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL)
-  endif ()
-endif()
-
-
-# load the system- and compiler specific files
-if(CMAKE_C_COMPILER_ID)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_C_COMPILER_ID}-C
-    OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
-endif()
-if (NOT _INCLUDED_FILE)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}
-    OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
-endif ()
-# We specify the compiler information in the system file for some
-# platforms, but this language may not have been enabled when the file
-# was first included.  Include it again to get the language info.
-# Remove this when all compiler info is removed from system files.
-if (NOT _INCLUDED_FILE)
-  include(Platform/${CMAKE_SYSTEM_NAME} OPTIONAL)
-endif ()
-
-if(CMAKE_C_SIZEOF_DATA_PTR)
-  foreach(f ${CMAKE_C_ABI_FILES})
-    include(${f})
-  endforeach()
-  unset(CMAKE_C_ABI_FILES)
-endif()
-
-# This should be included before the _INIT variables are
-# used to initialize the cache.  Since the rule variables
-# have if blocks on them, users can still define them here.
-# But, it should still be after the platform file so changes can
-# be made to those values.
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
-endif()
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE_C)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_C} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE_C "${_override}")
-endif()
-
-
-# for most systems a module is the same as a shared library
-# so unless the variable CMAKE_MODULE_EXISTS is set just
-# copy the values from the LIBRARY variables
-if(NOT CMAKE_MODULE_EXISTS)
-  set(CMAKE_SHARED_MODULE_C_FLAGS ${CMAKE_SHARED_LIBRARY_C_FLAGS})
-  set(CMAKE_SHARED_MODULE_CREATE_C_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS})
-endif()
-
-set(CMAKE_C_FLAGS_INIT "$ENV{CFLAGS} ${CMAKE_C_FLAGS_INIT}")
-# avoid just having a space as the initial value for the cache
-if(CMAKE_C_FLAGS_INIT STREQUAL " ")
-  set(CMAKE_C_FLAGS_INIT)
-endif()
-set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS_INIT}" CACHE STRING
-     "Flags used by the compiler during all build types.")
-
-if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
-# default build type is none
-  if(NOT CMAKE_NO_BUILD_TYPE)
-    set (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING
-      "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel.")
-  endif()
-  set (CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG_INIT}" CACHE STRING
-    "Flags used by the compiler during debug builds.")
-  set (CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL_INIT}" CACHE STRING
-    "Flags used by the compiler during release builds for minimum size.")
-  set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE_INIT}" CACHE STRING
-    "Flags used by the compiler during release builds.")
-  set (CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
-    "Flags used by the compiler during release builds with debug info.")
-endif()
-
-if(CMAKE_C_STANDARD_LIBRARIES_INIT)
-  set(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES_INIT}"
-    CACHE STRING "Libraries linked by default with all C applications.")
-  mark_as_advanced(CMAKE_C_STANDARD_LIBRARIES)
-endif()
-
-include(CMakeCommonLanguageInclude)
-
-# now define the following rule variables
-
-# CMAKE_C_CREATE_SHARED_LIBRARY
-# CMAKE_C_CREATE_SHARED_MODULE
-# CMAKE_C_COMPILE_OBJECT
-# CMAKE_C_LINK_EXECUTABLE
-
-# variables supplied by the generator at use time
-# <TARGET>
-# <TARGET_BASE> the target without the suffix
-# <OBJECTS>
-# <OBJECT>
-# <LINK_LIBRARIES>
-# <FLAGS>
-# <LINK_FLAGS>
-
-# C compiler information
-# <CMAKE_C_COMPILER>
-# <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS>
-# <CMAKE_SHARED_MODULE_CREATE_C_FLAGS>
-# <CMAKE_C_LINK_FLAGS>
-
-# Static library tools
-# <CMAKE_AR>
-# <CMAKE_RANLIB>
-
-
-# create a C shared library
-if(NOT CMAKE_C_CREATE_SHARED_LIBRARY)
-  set(CMAKE_C_CREATE_SHARED_LIBRARY
-      "<CMAKE_C_COMPILER> <CMAKE_SHARED_LIBRARY_C_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS> <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
-endif()
-
-# create a C shared module just copy the shared library rule
-if(NOT CMAKE_C_CREATE_SHARED_MODULE)
-  set(CMAKE_C_CREATE_SHARED_MODULE ${CMAKE_C_CREATE_SHARED_LIBRARY})
-endif()
-
-# Create a static archive incrementally for large object file counts.
-# If CMAKE_C_CREATE_STATIC_LIBRARY is set it will override these.
-if(NOT DEFINED CMAKE_C_ARCHIVE_CREATE)
-  set(CMAKE_C_ARCHIVE_CREATE "<CMAKE_AR> cq <TARGET> <LINK_FLAGS> <OBJECTS>")
-endif()
-if(NOT DEFINED CMAKE_C_ARCHIVE_APPEND)
-  set(CMAKE_C_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
-endif()
-if(NOT DEFINED CMAKE_C_ARCHIVE_FINISH)
-  set(CMAKE_C_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
-endif()
-
-# compile a C file into an object file
-if(NOT CMAKE_C_COMPILE_OBJECT)
-  set(CMAKE_C_COMPILE_OBJECT
-    "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -o <OBJECT>   -c <SOURCE>")
-endif()
-
-if(NOT CMAKE_C_LINK_EXECUTABLE)
-  set(CMAKE_C_LINK_EXECUTABLE
-    "<CMAKE_C_COMPILER> <FLAGS> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RUNTIME_C_FLAG)
-  set(CMAKE_EXECUTABLE_RUNTIME_C_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG})
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RUNTIME_C_FLAG_SEP)
-  set(CMAKE_EXECUTABLE_RUNTIME_C_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP})
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RPATH_LINK_C_FLAG)
-  set(CMAKE_EXECUTABLE_RPATH_LINK_C_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG})
-endif()
-
-mark_as_advanced(
-CMAKE_C_FLAGS
-CMAKE_C_FLAGS_DEBUG
-CMAKE_C_FLAGS_MINSIZEREL
-CMAKE_C_FLAGS_RELEASE
-CMAKE_C_FLAGS_RELWITHDEBINFO
-)
-set(CMAKE_C_INFORMATION_LOADED 1)
-
-
diff --git a/share/cmake-3.2/Modules/CMakeCXXCompiler.cmake.in b/share/cmake-3.2/Modules/CMakeCXXCompiler.cmake.in
deleted file mode 100644
index af79a31..0000000
--- a/share/cmake-3.2/Modules/CMakeCXXCompiler.cmake.in
+++ /dev/null
@@ -1,64 +0,0 @@
-set(CMAKE_CXX_COMPILER "@CMAKE_CXX_COMPILER@")
-set(CMAKE_CXX_COMPILER_ARG1 "@CMAKE_CXX_COMPILER_ARG1@")
-set(CMAKE_CXX_COMPILER_ID "@CMAKE_CXX_COMPILER_ID@")
-set(CMAKE_CXX_COMPILER_VERSION "@CMAKE_CXX_COMPILER_VERSION@")
-set(CMAKE_CXX_COMPILE_FEATURES "@CMAKE_CXX_COMPILE_FEATURES@")
-set(CMAKE_CXX98_COMPILE_FEATURES "@CMAKE_CXX98_COMPILE_FEATURES@")
-set(CMAKE_CXX11_COMPILE_FEATURES "@CMAKE_CXX11_COMPILE_FEATURES@")
-set(CMAKE_CXX14_COMPILE_FEATURES "@CMAKE_CXX14_COMPILE_FEATURES@")
-
-set(CMAKE_CXX_PLATFORM_ID "@CMAKE_CXX_PLATFORM_ID@")
-set(CMAKE_CXX_SIMULATE_ID "@CMAKE_CXX_SIMULATE_ID@")
-set(CMAKE_CXX_SIMULATE_VERSION "@CMAKE_CXX_SIMULATE_VERSION@")
-@SET_MSVC_CXX_ARCHITECTURE_ID@
-set(CMAKE_AR "@CMAKE_AR@")
-set(CMAKE_RANLIB "@CMAKE_RANLIB@")
-set(CMAKE_LINKER "@CMAKE_LINKER@")
-set(CMAKE_COMPILER_IS_GNUCXX @CMAKE_COMPILER_IS_GNUCXX@)
-set(CMAKE_CXX_COMPILER_LOADED 1)
-set(CMAKE_CXX_COMPILER_WORKS @CMAKE_CXX_COMPILER_WORKS@)
-set(CMAKE_CXX_ABI_COMPILED @CMAKE_CXX_ABI_COMPILED@)
-set(CMAKE_COMPILER_IS_MINGW @CMAKE_COMPILER_IS_MINGW@)
-set(CMAKE_COMPILER_IS_CYGWIN @CMAKE_COMPILER_IS_CYGWIN@)
-if(CMAKE_COMPILER_IS_CYGWIN)
-  set(CYGWIN 1)
-  set(UNIX 1)
-endif()
-
-set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
-
-if(CMAKE_COMPILER_IS_MINGW)
-  set(MINGW 1)
-endif()
-set(CMAKE_CXX_COMPILER_ID_RUN 1)
-set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
-set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;mm;CPP)
-set(CMAKE_CXX_LINKER_PREFERENCE 30)
-set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
-
-# Save compiler ABI information.
-set(CMAKE_CXX_SIZEOF_DATA_PTR "@CMAKE_CXX_SIZEOF_DATA_PTR@")
-set(CMAKE_CXX_COMPILER_ABI "@CMAKE_CXX_COMPILER_ABI@")
-set(CMAKE_CXX_LIBRARY_ARCHITECTURE "@CMAKE_CXX_LIBRARY_ARCHITECTURE@")
-
-if(CMAKE_CXX_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_CXX_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
-endif()
-
-if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "@CMAKE_CXX_LIBRARY_ARCHITECTURE@")
-endif()
-
-@CMAKE_CXX_SYSROOT_FLAG_CODE@
-@CMAKE_CXX_OSX_DEPLOYMENT_TARGET_FLAG_CODE@
-
-set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "@CMAKE_CXX_IMPLICIT_LINK_LIBRARIES@")
-set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "@CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES@")
-set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "@CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES@")
-
-@SET_CMAKE_CMCLDEPS_EXECUTABLE@
-@SET_CMAKE_CL_SHOWINCLUDES_PREFIX@
diff --git a/share/cmake-3.2/Modules/CMakeCXXCompilerABI.cpp b/share/cmake-3.2/Modules/CMakeCXXCompilerABI.cpp
deleted file mode 100644
index c9b0440..0000000
--- a/share/cmake-3.2/Modules/CMakeCXXCompilerABI.cpp
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __cplusplus
-# error "A C compiler has been selected for C++."
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-#include "CMakeCompilerABI.h"
-
-/*--------------------------------------------------------------------------*/
-
-int main(int argc, char* argv[])
-{
-  int require = 0;
-  require += info_sizeof_dptr[argc];
-#if defined(ABI_ID)
-  require += info_abi[argc];
-#endif
-  (void)argv;
-  return require;
-}
diff --git a/share/cmake-3.2/Modules/CMakeCXXCompilerId.cpp.in b/share/cmake-3.2/Modules/CMakeCXXCompilerId.cpp.in
deleted file mode 100644
index cc3ab49..0000000
--- a/share/cmake-3.2/Modules/CMakeCXXCompilerId.cpp.in
+++ /dev/null
@@ -1,44 +0,0 @@
-/* This source file must have a .cpp extension so that all C++ compilers
-   recognize the extension without flags.  Borland does not know .cxx for
-   example.  */
-#ifndef __cplusplus
-# error "A C compiler has been selected for C++."
-#endif
-
-@CMAKE_CXX_COMPILER_ID_CONTENT@
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-@CMAKE_CXX_COMPILER_ID_PLATFORM_CONTENT@
-@CMAKE_CXX_COMPILER_ID_ERROR_FOR_TEST@
-
-/*--------------------------------------------------------------------------*/
-
-int main(int argc, char* argv[])
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-  (void)argv;
-  return require;
-}
diff --git a/share/cmake-3.2/Modules/CMakeCXXInformation.cmake b/share/cmake-3.2/Modules/CMakeCXXInformation.cmake
deleted file mode 100644
index 72b2857..0000000
--- a/share/cmake-3.2/Modules/CMakeCXXInformation.cmake
+++ /dev/null
@@ -1,298 +0,0 @@
-
-#=============================================================================
-# Copyright 2004-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This file sets the basic flags for the C++ language in CMake.
-# It also loads the available platform file for the system-compiler
-# if it exists.
-# It also loads a system - compiler - processor (or target hardware)
-# specific file, which is mainly useful for crosscompiling and embedded systems.
-
-# some compilers use different extensions (e.g. sdcc uses .rel)
-# so set the extension here first so it can be overridden by the compiler specific file
-if(UNIX)
-  set(CMAKE_CXX_OUTPUT_EXTENSION .o)
-else()
-  set(CMAKE_CXX_OUTPUT_EXTENSION .obj)
-endif()
-
-set(_INCLUDED_FILE 0)
-
-# Load compiler-specific information.
-if(CMAKE_CXX_COMPILER_ID)
-  include(Compiler/${CMAKE_CXX_COMPILER_ID}-CXX OPTIONAL)
-endif()
-
-set(CMAKE_BASE_NAME)
-get_filename_component(CMAKE_BASE_NAME "${CMAKE_CXX_COMPILER}" NAME_WE)
-# since the gnu compiler has several names force g++
-if(CMAKE_COMPILER_IS_GNUCXX)
-  set(CMAKE_BASE_NAME g++)
-endif()
-
-
-# load a hardware specific file, mostly useful for embedded compilers
-if(CMAKE_SYSTEM_PROCESSOR)
-  if(CMAKE_CXX_COMPILER_ID)
-    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_CXX_COMPILER_ID}-CXX-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
-  endif()
-  if (NOT _INCLUDED_FILE)
-    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL)
-  endif ()
-endif()
-
-# load the system- and compiler specific files
-if(CMAKE_CXX_COMPILER_ID)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_CXX_COMPILER_ID}-CXX OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
-endif()
-if (NOT _INCLUDED_FILE)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL
-          RESULT_VARIABLE _INCLUDED_FILE)
-endif ()
-# We specify the compiler information in the system file for some
-# platforms, but this language may not have been enabled when the file
-# was first included.  Include it again to get the language info.
-# Remove this when all compiler info is removed from system files.
-if (NOT _INCLUDED_FILE)
-  include(Platform/${CMAKE_SYSTEM_NAME} OPTIONAL)
-endif ()
-
-if(CMAKE_CXX_SIZEOF_DATA_PTR)
-  foreach(f ${CMAKE_CXX_ABI_FILES})
-    include(${f})
-  endforeach()
-  unset(CMAKE_CXX_ABI_FILES)
-endif()
-
-# This should be included before the _INIT variables are
-# used to initialize the cache.  Since the rule variables
-# have if blocks on them, users can still define them here.
-# But, it should still be after the platform file so changes can
-# be made to those values.
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
-endif()
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE_CXX)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_CXX} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE_CXX "${_override}")
-endif()
-
-
-# Create a set of shared library variable specific to C++
-# For 90% of the systems, these are the same flags as the C versions
-# so if these are not set just copy the flags from the c version
-if(NOT CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS)
-  set(CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS})
-endif()
-
-if(NOT CMAKE_CXX_COMPILE_OPTIONS_PIC)
-  set(CMAKE_CXX_COMPILE_OPTIONS_PIC ${CMAKE_C_COMPILE_OPTIONS_PIC})
-endif()
-
-if(NOT CMAKE_CXX_COMPILE_OPTIONS_PIE)
-  set(CMAKE_CXX_COMPILE_OPTIONS_PIE ${CMAKE_C_COMPILE_OPTIONS_PIE})
-endif()
-
-if(NOT CMAKE_CXX_COMPILE_OPTIONS_DLL)
-  set(CMAKE_CXX_COMPILE_OPTIONS_DLL ${CMAKE_C_COMPILE_OPTIONS_DLL})
-endif()
-
-if(NOT CMAKE_SHARED_LIBRARY_CXX_FLAGS)
-  set(CMAKE_SHARED_LIBRARY_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_C_FLAGS})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS)
-  set(CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_LINK_C_FLAGS})
-endif()
-
-if(NOT CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG)
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG})
-endif()
-
-if(NOT CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP)
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP})
-endif()
-
-if(NOT CMAKE_SHARED_LIBRARY_RPATH_LINK_CXX_FLAG)
-  set(CMAKE_SHARED_LIBRARY_RPATH_LINK_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_EXE_EXPORTS_CXX_FLAG)
-  set(CMAKE_EXE_EXPORTS_CXX_FLAG ${CMAKE_EXE_EXPORTS_C_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_SONAME_CXX_FLAG)
-  set(CMAKE_SHARED_LIBRARY_SONAME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_SONAME_C_FLAG})
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG)
-  set(CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG})
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG_SEP)
-  set(CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP})
-endif()
-
-if(NOT CMAKE_EXECUTABLE_RPATH_LINK_CXX_FLAG)
-  set(CMAKE_EXECUTABLE_RPATH_LINK_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_CXX_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_CXX_WITH_RUNTIME_PATH)
-  set(CMAKE_SHARED_LIBRARY_LINK_CXX_WITH_RUNTIME_PATH ${CMAKE_SHARED_LIBRARY_LINK_C_WITH_RUNTIME_PATH})
-endif()
-
-if(NOT CMAKE_INCLUDE_FLAG_CXX)
-  set(CMAKE_INCLUDE_FLAG_CXX ${CMAKE_INCLUDE_FLAG_C})
-endif()
-
-if(NOT CMAKE_INCLUDE_FLAG_SEP_CXX)
-  set(CMAKE_INCLUDE_FLAG_SEP_CXX ${CMAKE_INCLUDE_FLAG_SEP_C})
-endif()
-
-# for most systems a module is the same as a shared library
-# so unless the variable CMAKE_MODULE_EXISTS is set just
-# copy the values from the LIBRARY variables
-if(NOT CMAKE_MODULE_EXISTS)
-  set(CMAKE_SHARED_MODULE_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_CXX_FLAGS})
-  set(CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS})
-endif()
-
-# repeat for modules
-if(NOT CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS)
-  set(CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS ${CMAKE_SHARED_MODULE_CREATE_C_FLAGS})
-endif()
-
-if(NOT CMAKE_SHARED_MODULE_CXX_FLAGS)
-  set(CMAKE_SHARED_MODULE_CXX_FLAGS ${CMAKE_SHARED_MODULE_C_FLAGS})
-endif()
-
-# Initialize CXX link type selection flags from C versions.
-foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-  if(NOT CMAKE_${type}_LINK_STATIC_CXX_FLAGS)
-    set(CMAKE_${type}_LINK_STATIC_CXX_FLAGS
-      ${CMAKE_${type}_LINK_STATIC_C_FLAGS})
-  endif()
-  if(NOT CMAKE_${type}_LINK_DYNAMIC_CXX_FLAGS)
-    set(CMAKE_${type}_LINK_DYNAMIC_CXX_FLAGS
-      ${CMAKE_${type}_LINK_DYNAMIC_C_FLAGS})
-  endif()
-endforeach()
-
-# add the flags to the cache based
-# on the initial values computed in the platform/*.cmake files
-# use _INIT variables so that this only happens the first time
-# and you can set these flags in the cmake cache
-set(CMAKE_CXX_FLAGS_INIT "$ENV{CXXFLAGS} ${CMAKE_CXX_FLAGS_INIT}")
-# avoid just having a space as the initial value for the cache
-if(CMAKE_CXX_FLAGS_INIT STREQUAL " ")
-  set(CMAKE_CXX_FLAGS_INIT)
-endif()
-set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS_INIT}" CACHE STRING
-     "Flags used by the compiler during all build types.")
-
-if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
-  set (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG_INIT}" CACHE STRING
-     "Flags used by the compiler during debug builds.")
-  set (CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL_INIT}" CACHE STRING
-     "Flags used by the compiler during release builds for minimum size.")
-  set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE_INIT}" CACHE STRING
-     "Flags used by the compiler during release builds.")
-  set (CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
-     "Flags used by the compiler during release builds with debug info.")
-
-endif()
-
-if(CMAKE_CXX_STANDARD_LIBRARIES_INIT)
-  set(CMAKE_CXX_STANDARD_LIBRARIES "${CMAKE_CXX_STANDARD_LIBRARIES_INIT}"
-    CACHE STRING "Libraries linked by default with all C++ applications.")
-  mark_as_advanced(CMAKE_CXX_STANDARD_LIBRARIES)
-endif()
-
-include(CMakeCommonLanguageInclude)
-
-# now define the following rules:
-# CMAKE_CXX_CREATE_SHARED_LIBRARY
-# CMAKE_CXX_CREATE_SHARED_MODULE
-# CMAKE_CXX_COMPILE_OBJECT
-# CMAKE_CXX_LINK_EXECUTABLE
-
-# variables supplied by the generator at use time
-# <TARGET>
-# <TARGET_BASE> the target without the suffix
-# <OBJECTS>
-# <OBJECT>
-# <LINK_LIBRARIES>
-# <FLAGS>
-# <LINK_FLAGS>
-
-# CXX compiler information
-# <CMAKE_CXX_COMPILER>
-# <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS>
-# <CMAKE_CXX_SHARED_MODULE_CREATE_FLAGS>
-# <CMAKE_CXX_LINK_FLAGS>
-
-# Static library tools
-# <CMAKE_AR>
-# <CMAKE_RANLIB>
-
-
-# create a shared C++ library
-if(NOT CMAKE_CXX_CREATE_SHARED_LIBRARY)
-  set(CMAKE_CXX_CREATE_SHARED_LIBRARY
-      "<CMAKE_CXX_COMPILER> <CMAKE_SHARED_LIBRARY_CXX_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS> <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
-endif()
-
-# create a c++ shared module copy the shared library rule by default
-if(NOT CMAKE_CXX_CREATE_SHARED_MODULE)
-  set(CMAKE_CXX_CREATE_SHARED_MODULE ${CMAKE_CXX_CREATE_SHARED_LIBRARY})
-endif()
-
-
-# Create a static archive incrementally for large object file counts.
-# If CMAKE_CXX_CREATE_STATIC_LIBRARY is set it will override these.
-if(NOT DEFINED CMAKE_CXX_ARCHIVE_CREATE)
-  set(CMAKE_CXX_ARCHIVE_CREATE "<CMAKE_AR> cq <TARGET> <LINK_FLAGS> <OBJECTS>")
-endif()
-if(NOT DEFINED CMAKE_CXX_ARCHIVE_APPEND)
-  set(CMAKE_CXX_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
-endif()
-if(NOT DEFINED CMAKE_CXX_ARCHIVE_FINISH)
-  set(CMAKE_CXX_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
-endif()
-
-# compile a C++ file into an object file
-if(NOT CMAKE_CXX_COMPILE_OBJECT)
-  set(CMAKE_CXX_COMPILE_OBJECT
-    "<CMAKE_CXX_COMPILER>  <DEFINES> <FLAGS> -o <OBJECT> -c <SOURCE>")
-endif()
-
-if(NOT CMAKE_CXX_LINK_EXECUTABLE)
-  set(CMAKE_CXX_LINK_EXECUTABLE
-    "<CMAKE_CXX_COMPILER>  <FLAGS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
-endif()
-
-mark_as_advanced(
-CMAKE_VERBOSE_MAKEFILE
-CMAKE_CXX_FLAGS
-CMAKE_CXX_FLAGS_RELEASE
-CMAKE_CXX_FLAGS_RELWITHDEBINFO
-CMAKE_CXX_FLAGS_MINSIZEREL
-CMAKE_CXX_FLAGS_DEBUG)
-
-set(CMAKE_CXX_INFORMATION_LOADED 1)
-
diff --git a/share/cmake-3.2/Modules/CMakeCheckCompilerFlagCommonPatterns.cmake b/share/cmake-3.2/Modules/CMakeCheckCompilerFlagCommonPatterns.cmake
deleted file mode 100644
index 19b2bbc..0000000
--- a/share/cmake-3.2/Modules/CMakeCheckCompilerFlagCommonPatterns.cmake
+++ /dev/null
@@ -1,43 +0,0 @@
-
-#=============================================================================
-# Copyright 2006-2011 Kitware, Inc.
-# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
-# Copyright 2011 Matthias Kretz <kretz@kde.org>
-# Copyright 2013 Rolf Eike Beer <eike@sf-mail.de>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Do NOT include this module directly into any of your code. It is meant as
-# a library for Check*CompilerFlag.cmake modules. It's content may change in
-# any way between releases.
-
-macro (CHECK_COMPILER_FLAG_COMMON_PATTERNS _VAR)
-   set(${_VAR}
-     FAIL_REGEX "unrecognized .*option"                     # GNU
-     FAIL_REGEX "unknown .*option"                          # Clang
-     FAIL_REGEX "ignoring unknown option"                   # MSVC
-     FAIL_REGEX "warning D9002"                             # MSVC, any lang
-     FAIL_REGEX "option.*not supported"                     # Intel
-     FAIL_REGEX "invalid argument .*option"                 # Intel
-     FAIL_REGEX "ignoring option .*argument required"       # Intel
-     FAIL_REGEX "ignoring option .*argument is of wrong type" # Intel
-     FAIL_REGEX "[Uu]nknown option"                         # HP
-     FAIL_REGEX "[Ww]arning: [Oo]ption"                     # SunPro
-     FAIL_REGEX "command option .* is not recognized"       # XL
-     FAIL_REGEX "command option .* contains an incorrect subargument" # XL
-     FAIL_REGEX "not supported in this configuration. ignored"       # AIX
-     FAIL_REGEX "File with unknown suffix passed to linker" # PGI
-     FAIL_REGEX "WARNING: unknown flag:"                    # Open64
-     FAIL_REGEX "Incorrect command line option:"            # Borland
-     FAIL_REGEX "Warning: illegal option"                   # SunStudio 12
-     FAIL_REGEX "[Ww]arning: Invalid suboption"             # Fujitsu
-   )
-endmacro ()
diff --git a/share/cmake-3.2/Modules/CMakeClDeps.cmake b/share/cmake-3.2/Modules/CMakeClDeps.cmake
deleted file mode 100644
index b46e7c2..0000000
--- a/share/cmake-3.2/Modules/CMakeClDeps.cmake
+++ /dev/null
@@ -1,34 +0,0 @@
-
-#=============================================================================
-# Copyright 2012 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#
-# When using Ninja cl.exe is wrapped by cmcldeps to extract the included
-# headers for dependency tracking.
-#
-# cmcldeps path is set, and cmcldeps needs to know the localized string
-# in front of each include path, so it can remove it.
-#
-
-if(CMAKE_GENERATOR MATCHES "Ninja" AND CMAKE_C_COMPILER AND CMAKE_COMMAND)
-  string(REPLACE "cmake.exe" "cmcldeps.exe"  CMAKE_CMCLDEPS_EXECUTABLE ${CMAKE_COMMAND})
-  set(showdir ${CMAKE_BINARY_DIR}/CMakeFiles/ShowIncludes)
-  file(WRITE ${showdir}/foo.h "\n")
-  file(WRITE ${showdir}/main.c "#include \"foo.h\" \nint main(){}\n")
-  execute_process(COMMAND ${CMAKE_C_COMPILER} /nologo /showIncludes ${showdir}/main.c
-                  WORKING_DIRECTORY ${showdir} OUTPUT_VARIABLE outLine)
-  string(REGEX MATCH "\n([^:]*:[^:]*:[ \t]*)" tmp "${outLine}")
-  set(localizedPrefix "${CMAKE_MATCH_1}")
-  set(SET_CMAKE_CMCLDEPS_EXECUTABLE   "set(CMAKE_CMCLDEPS_EXECUTABLE \"${CMAKE_CMCLDEPS_EXECUTABLE}\")")
-  set(SET_CMAKE_CL_SHOWINCLUDES_PREFIX "set(CMAKE_CL_SHOWINCLUDES_PREFIX \"${localizedPrefix}\")")
-endif()
diff --git a/share/cmake-3.2/Modules/CMakeCompilerABI.h b/share/cmake-3.2/Modules/CMakeCompilerABI.h
deleted file mode 100644
index 26ae4db..0000000
--- a/share/cmake-3.2/Modules/CMakeCompilerABI.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*--------------------------------------------------------------------------*/
-
-/* Size of a pointer-to-data in bytes.  */
-#define SIZEOF_DPTR (sizeof(void*))
-const char info_sizeof_dptr[] =  {
-  'I', 'N', 'F', 'O', ':', 's', 'i', 'z', 'e', 'o', 'f', '_', 'd', 'p', 't', 'r', '[',
-  ('0' + ((SIZEOF_DPTR / 10)%10)),
-  ('0' +  (SIZEOF_DPTR    % 10)),
-  ']','\0'};
-
-/*--------------------------------------------------------------------------*/
-
-/* Application Binary Interface.  */
-#if defined(__sgi) && defined(_ABIO32)
-# define ABI_ID "ELF O32"
-#elif defined(__sgi) && defined(_ABIN32)
-# define ABI_ID "ELF N32"
-#elif defined(__sgi) && defined(_ABI64)
-# define ABI_ID "ELF 64"
-
-/* Check for (some) ARM ABIs.
- * See e.g. http://wiki.debian.org/ArmEabiPort for some information on this. */
-#elif defined(__GNU__) && defined(__ELF__) && defined(__ARM_EABI__)
-# define ABI_ID "ELF ARMEABI"
-#elif defined(__GNU__) && defined(__ELF__) && defined(__ARMEB__)
-# define ABI_ID "ELF ARM"
-#elif defined(__GNU__) && defined(__ELF__) && defined(__ARMEL__)
-# define ABI_ID "ELF ARM"
-
-#elif defined(__ELF__)
-# define ABI_ID "ELF"
-#endif
-
-#if defined(ABI_ID)
-static char const info_abi[] = "INFO:abi[" ABI_ID "]";
-#endif
diff --git a/share/cmake-3.2/Modules/CMakeCompilerIdDetection.cmake b/share/cmake-3.2/Modules/CMakeCompilerIdDetection.cmake
deleted file mode 100644
index 19bcbcc..0000000
--- a/share/cmake-3.2/Modules/CMakeCompilerIdDetection.cmake
+++ /dev/null
@@ -1,157 +0,0 @@
-
-#=============================================================================
-# Copyright 2014 Stephen Kelly <steveire@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-function(_readFile file)
-  include(${file})
-  get_filename_component(name ${file} NAME_WE)
-  string(REGEX REPLACE "-.*" "" CompilerId ${name})
-  set(_compiler_id_version_compute_${CompilerId} ${_compiler_id_version_compute} PARENT_SCOPE)
-  set(_compiler_id_simulate_${CompilerId} ${_compiler_id_simulate} PARENT_SCOPE)
-  set(_compiler_id_pp_test_${CompilerId} ${_compiler_id_pp_test} PARENT_SCOPE)
-endfunction()
-
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
-
-function(compiler_id_detection outvar lang)
-
-  if (NOT lang STREQUAL Fortran)
-    file(GLOB lang_files
-      "${CMAKE_ROOT}/Modules/Compiler/*-DetermineCompiler.cmake")
-    set(nonlang CXX)
-    if (lang STREQUAL CXX)
-      set(nonlang C)
-    endif()
-
-    file(GLOB nonlang_files
-      "${CMAKE_ROOT}/Modules/Compiler/*-${nonlang}-DetermineCompiler.cmake")
-    list(REMOVE_ITEM lang_files ${nonlang_files})
-  endif()
-
-  set(files ${lang_files})
-  if (files)
-    foreach(file ${files})
-      _readFile(${file})
-    endforeach()
-
-    set(options ID_STRING VERSION_STRINGS ID_DEFINE PLATFORM_DEFAULT_COMPILER)
-    set(oneValueArgs PREFIX)
-    cmake_parse_arguments(CID "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
-    if (CID_UNPARSED_ARGUMENTS)
-      message(FATAL_ERROR "Unrecognized arguments: \"${CID_UNPARSED_ARGUMENTS}\"")
-    endif()
-
-    # Order is relevant here. For example, compilers which pretend to be
-    # GCC must appear before the actual GCC.
-    if (lang STREQUAL CXX)
-      list(APPEND ordered_compilers
-        Comeau
-      )
-    endif()
-    list(APPEND ordered_compilers
-      Intel
-      PathScale
-      Embarcadero
-      Borland
-      Watcom
-      OpenWatcom
-      SunPro
-      HP
-      Compaq
-      zOS
-      XL
-      VisualAge
-      PGI
-      Cray
-      TI
-      Fujitsu
-    )
-    if (lang STREQUAL C)
-      list(APPEND ordered_compilers
-        TinyCC
-      )
-    endif()
-    list(APPEND ordered_compilers
-      SCO
-      AppleClang
-      Clang
-      GNU
-      MSVC
-      ADSP
-      IAR
-    )
-    if (lang STREQUAL C)
-      list(APPEND ordered_compilers
-        SDCC
-      )
-    endif()
-    list(APPEND ordered_compilers
-      MIPSpro)
-
-    if(CID_ID_DEFINE)
-      foreach(Id ${ordered_compilers})
-        set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}# define ${CID_PREFIX}COMPILER_IS_${Id} 0\n")
-      endforeach()
-    endif()
-
-    set(pp_if "#if")
-    if (CID_VERSION_STRINGS)
-      set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}\n/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */\n")
-    endif()
-
-    foreach(Id ${ordered_compilers})
-      if (NOT _compiler_id_pp_test_${Id})
-        message(FATAL_ERROR "No preprocessor test for \"${Id}\"")
-      endif()
-      set(id_content "${pp_if} ${_compiler_id_pp_test_${Id}}\n")
-      if (CID_ID_STRING)
-        set(PREFIX ${CID_PREFIX})
-        string(CONFIGURE "${_compiler_id_simulate_${Id}}" SIMULATE_BLOCK @ONLY)
-        set(id_content "${id_content}# define ${CID_PREFIX}COMPILER_ID \"${Id}\"${SIMULATE_BLOCK}")
-      endif()
-      if (CID_ID_DEFINE)
-        set(id_content "${id_content}# undef ${CID_PREFIX}COMPILER_IS_${Id}\n")
-        set(id_content "${id_content}# define ${CID_PREFIX}COMPILER_IS_${Id} 1\n")
-      endif()
-      if (CID_VERSION_STRINGS)
-        set(PREFIX ${CID_PREFIX})
-        set(MACRO_DEC DEC)
-        set(MACRO_HEX HEX)
-        string(CONFIGURE "${_compiler_id_version_compute_${Id}}" VERSION_BLOCK @ONLY)
-        set(id_content "${id_content}${VERSION_BLOCK}\n")
-      endif()
-      set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}\n${id_content}")
-      set(pp_if "#elif")
-    endforeach()
-
-    if (CID_PLATFORM_DEFAULT_COMPILER)
-      set(platform_compiler_detection "
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__sgi)
-# define ${CID_PREFIX}COMPILER_ID \"MIPSpro\"
-
-#elif defined(__hpux) || defined(__hpua)
-# define ${CID_PREFIX}COMPILER_ID \"HP\"
-
-#else /* unknown compiler */
-# define ${CID_PREFIX}COMPILER_ID \"\"")
-    endif()
-
-    set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}\n${platform_compiler_detection}\n#endif")
-  endif()
-
-  set(${outvar} ${CMAKE_${lang}_COMPILER_ID_CONTENT} PARENT_SCOPE)
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeDetermineASMCompiler.cmake b/share/cmake-3.2/Modules/CMakeDetermineASMCompiler.cmake
deleted file mode 100644
index 25af3e3..0000000
--- a/share/cmake-3.2/Modules/CMakeDetermineASMCompiler.cmake
+++ /dev/null
@@ -1,159 +0,0 @@
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# determine the compiler to use for ASM programs
-
-include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
-
-if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER)
-  # prefer the environment variable ASM
-  if(NOT $ENV{ASM${ASM_DIALECT}} STREQUAL "")
-    set(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT "$ENV{ASM${ASM_DIALECT}}")
-  endif()
-
-  # finally list compilers to try
-  if("ASM${ASM_DIALECT}" STREQUAL "ASM") # the generic assembler support
-    if(NOT CMAKE_ASM_COMPILER_INIT)
-      if(CMAKE_C_COMPILER)
-        set(CMAKE_ASM_COMPILER "${CMAKE_C_COMPILER}" CACHE FILEPATH "The ASM compiler")
-        set(CMAKE_ASM_COMPILER_ID "${CMAKE_C_COMPILER_ID}")
-      elseif(CMAKE_CXX_COMPILER)
-        set(CMAKE_ASM_COMPILER "${CMAKE_CXX_COMPILER}" CACHE FILEPATH "The ASM compiler")
-        set(CMAKE_ASM_COMPILER_ID "${CMAKE_CXX_COMPILER_ID}")
-      else()
-        # List all default C and CXX compilers
-        set(CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST
-             ${_CMAKE_TOOLCHAIN_PREFIX}cc  ${_CMAKE_TOOLCHAIN_PREFIX}gcc cl bcc xlc
-          CC ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ aCC cl bcc xlC)
-      endif()
-    endif()
-  else() # some specific assembler "dialect"
-    if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT  AND NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST)
-      message(FATAL_ERROR "CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT or CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST must be preset !")
-    endif()
-  endif()
-
-  # Find the compiler.
-  _cmake_find_compiler(ASM${ASM_DIALECT})
-
-else()
-  _cmake_find_compiler_path(ASM${ASM_DIALECT})
-endif()
-mark_as_advanced(CMAKE_ASM${ASM_DIALECT}_COMPILER)
-
-if (NOT _CMAKE_TOOLCHAIN_LOCATION)
-  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_ASM${ASM_DIALECT}_COMPILER}" PATH)
-endif ()
-
-
-if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
-
-  # Table of per-vendor compiler id flags with expected output.
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS GNU )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_GNU "--version")
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_GNU "(GNU assembler)|(GCC)|(Free Software Foundation)")
-
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS HP )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_HP "-V")
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_HP "HP C")
-
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS Intel )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_Intel "--version")
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_Intel "(ICC)")
-
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS SunPro )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_SunPro "-V")
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_SunPro "Sun C")
-
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS XL )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_XL "-qversion")
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_XL "XL C")
-
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS MSVC )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_MSVC "/?")
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_MSVC "Microsoft")
-
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS TI )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_TI "-h")
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_TI "Texas Instruments")
-
-  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS GNU IAR)
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_IAR )
-  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_IAR "IAR Assembler")
-
-  include(CMakeDetermineCompilerId)
-  CMAKE_DETERMINE_COMPILER_ID_VENDOR(ASM${ASM_DIALECT})
-
-endif()
-
-if(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
-  message(STATUS "The ASM${ASM_DIALECT} compiler identification is ${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}")
-else()
-  message(STATUS "The ASM${ASM_DIALECT} compiler identification is unknown")
-endif()
-
-
-
-# If we have a gas/as cross compiler, they have usually some prefix, like
-# e.g. powerpc-linux-gas, arm-elf-gas or i586-mingw32msvc-gas , optionally
-# with a 3-component version number at the end
-# The other tools of the toolchain usually have the same prefix
-# NAME_WE cannot be used since then this test will fail for names like
-# "arm-unknown-nto-qnx6.3.0-gas.exe", where BASENAME would be
-# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
-if (NOT _CMAKE_TOOLCHAIN_PREFIX)
-  get_filename_component(COMPILER_BASENAME "${CMAKE_ASM${ASM_DIALECT}_COMPILER}" NAME)
-  if (COMPILER_BASENAME MATCHES "^(.+-)g?as(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
-    set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-  endif ()
-endif ()
-
-# Now try the C compiler regexp:
-if (NOT _CMAKE_TOOLCHAIN_PREFIX)
-  if (COMPILER_BASENAME MATCHES "^(.+-)g?cc(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
-    set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-  endif ()
-endif ()
-
-# Finally try the CXX compiler regexp:
-if (NOT _CMAKE_TOOLCHAIN_PREFIX)
-  if (COMPILER_BASENAME MATCHES "^(.+-)[gc]\\+\\+(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
-    set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-  endif ()
-endif ()
-
-
-include(CMakeFindBinUtils)
-
-set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ENV_VAR "ASM${ASM_DIALECT}")
-
-if(CMAKE_ASM${ASM_DIALECT}_COMPILER)
-  message(STATUS "Found assembler: ${CMAKE_ASM${ASM_DIALECT}_COMPILER}")
-else()
-  message(STATUS "Didn't find assembler")
-endif()
-
-
-set(_CMAKE_ASM_COMPILER "${CMAKE_ASM${ASM_DIALECT}_COMPILER}")
-set(_CMAKE_ASM_COMPILER_ID "${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}")
-set(_CMAKE_ASM_COMPILER_ARG1 "${CMAKE_ASM${ASM_DIALECT}_COMPILER_ARG1}")
-set(_CMAKE_ASM_COMPILER_ENV_VAR "${CMAKE_ASM${ASM_DIALECT}_COMPILER_ENV_VAR}")
-
-# configure variables set in this file for fast reload later on
-configure_file(${CMAKE_ROOT}/Modules/CMakeASMCompiler.cmake.in
-  ${CMAKE_PLATFORM_INFO_DIR}/CMakeASM${ASM_DIALECT}Compiler.cmake @ONLY)
-
-set(_CMAKE_ASM_COMPILER)
-set(_CMAKE_ASM_COMPILER_ARG1)
-set(_CMAKE_ASM_COMPILER_ENV_VAR)
diff --git a/share/cmake-3.2/Modules/CMakeDetermineCCompiler.cmake b/share/cmake-3.2/Modules/CMakeDetermineCCompiler.cmake
deleted file mode 100644
index 937aa8c..0000000
--- a/share/cmake-3.2/Modules/CMakeDetermineCCompiler.cmake
+++ /dev/null
@@ -1,176 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# determine the compiler to use for C programs
-# NOTE, a generator may set CMAKE_C_COMPILER before
-# loading this file to force a compiler.
-# use environment variable CC first if defined by user, next use
-# the cmake variable CMAKE_GENERATOR_CC which can be defined by a generator
-# as a default compiler
-# If the internal cmake variable _CMAKE_TOOLCHAIN_PREFIX is set, this is used
-# as prefix for the tools (e.g. arm-elf-gcc, arm-elf-ar etc.). This works
-# currently with the GNU crosscompilers.
-#
-# Sets the following variables:
-#   CMAKE_C_COMPILER
-#   CMAKE_AR
-#   CMAKE_RANLIB
-#   CMAKE_COMPILER_IS_GNUCC
-#
-# If not already set before, it also sets
-#   _CMAKE_TOOLCHAIN_PREFIX
-
-include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
-
-# Load system-specific compiler preferences for this language.
-include(Platform/${CMAKE_SYSTEM_NAME}-C OPTIONAL)
-if(NOT CMAKE_C_COMPILER_NAMES)
-  set(CMAKE_C_COMPILER_NAMES cc)
-endif()
-
-if(${CMAKE_GENERATOR} MATCHES "Visual Studio")
-elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
-  set(CMAKE_C_COMPILER_XCODE_TYPE sourcecode.c.c)
-  _cmake_find_compiler_path(C)
-else()
-  if(NOT CMAKE_C_COMPILER)
-    set(CMAKE_C_COMPILER_INIT NOTFOUND)
-
-    # prefer the environment variable CC
-    if(NOT $ENV{CC} STREQUAL "")
-      get_filename_component(CMAKE_C_COMPILER_INIT $ENV{CC} PROGRAM PROGRAM_ARGS CMAKE_C_FLAGS_ENV_INIT)
-      if(CMAKE_C_FLAGS_ENV_INIT)
-        set(CMAKE_C_COMPILER_ARG1 "${CMAKE_C_FLAGS_ENV_INIT}" CACHE STRING "First argument to C compiler")
-      endif()
-      if(NOT EXISTS ${CMAKE_C_COMPILER_INIT})
-        message(FATAL_ERROR "Could not find compiler set in environment variable CC:\n$ENV{CC}.")
-      endif()
-    endif()
-
-    # next try prefer the compiler specified by the generator
-    if(CMAKE_GENERATOR_CC)
-      if(NOT CMAKE_C_COMPILER_INIT)
-        set(CMAKE_C_COMPILER_INIT ${CMAKE_GENERATOR_CC})
-      endif()
-    endif()
-
-    # finally list compilers to try
-    if(NOT CMAKE_C_COMPILER_INIT)
-      set(CMAKE_C_COMPILER_LIST ${_CMAKE_TOOLCHAIN_PREFIX}cc ${_CMAKE_TOOLCHAIN_PREFIX}gcc cl bcc xlc clang)
-    endif()
-
-    _cmake_find_compiler(C)
-
-  else()
-    _cmake_find_compiler_path(C)
-  endif()
-  mark_as_advanced(CMAKE_C_COMPILER)
-
-  # Each entry in this list is a set of extra flags to try
-  # adding to the compile line to see if it helps produce
-  # a valid identification file.
-  set(CMAKE_C_COMPILER_ID_TEST_FLAGS
-    # Try compiling to an object file only.
-    "-c"
-
-    # Try enabling ANSI mode on HP.
-    "-Aa"
-    )
-endif()
-
-# Build a small source file to identify the compiler.
-if(NOT CMAKE_C_COMPILER_ID_RUN)
-  set(CMAKE_C_COMPILER_ID_RUN 1)
-
-  # Try to identify the compiler.
-  set(CMAKE_C_COMPILER_ID)
-  file(READ ${CMAKE_ROOT}/Modules/CMakePlatformId.h.in
-    CMAKE_C_COMPILER_ID_PLATFORM_CONTENT)
-
-  # The IAR compiler produces weird output.
-  # See http://www.cmake.org/Bug/view.php?id=10176#c19598
-  list(APPEND CMAKE_C_COMPILER_ID_VENDORS IAR)
-  set(CMAKE_C_COMPILER_ID_VENDOR_FLAGS_IAR )
-  set(CMAKE_C_COMPILER_ID_VENDOR_REGEX_IAR "IAR .+ Compiler")
-
-  include(${CMAKE_ROOT}/Modules/CMakeDetermineCompilerId.cmake)
-  CMAKE_DETERMINE_COMPILER_ID(C CFLAGS CMakeCCompilerId.c)
-
-  # Set old compiler and platform id variables.
-  if(CMAKE_C_COMPILER_ID MATCHES "GNU")
-    set(CMAKE_COMPILER_IS_GNUCC 1)
-  endif()
-  if("${CMAKE_C_PLATFORM_ID}" MATCHES "MinGW")
-    set(CMAKE_COMPILER_IS_MINGW 1)
-  elseif("${CMAKE_C_PLATFORM_ID}" MATCHES "Cygwin")
-    set(CMAKE_COMPILER_IS_CYGWIN 1)
-  endif()
-endif()
-
-if (NOT _CMAKE_TOOLCHAIN_LOCATION)
-  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_C_COMPILER}" PATH)
-endif ()
-
-# If we have a gcc cross compiler, they have usually some prefix, like
-# e.g. powerpc-linux-gcc, arm-elf-gcc or i586-mingw32msvc-gcc, optionally
-# with a 3-component version number at the end (e.g. arm-eabi-gcc-4.5.2).
-# The other tools of the toolchain usually have the same prefix
-# NAME_WE cannot be used since then this test will fail for names like
-# "arm-unknown-nto-qnx6.3.0-gcc.exe", where BASENAME would be
-# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
-if (CMAKE_CROSSCOMPILING  AND NOT _CMAKE_TOOLCHAIN_PREFIX)
-
-  if(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_C_COMPILER_ID MATCHES "Clang")
-    get_filename_component(COMPILER_BASENAME "${CMAKE_C_COMPILER}" NAME)
-    if (COMPILER_BASENAME MATCHES "^(.+-)(clang|g?cc)(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
-      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-    elseif(CMAKE_C_COMPILER_ID MATCHES "Clang")
-      if(CMAKE_C_COMPILER_TARGET)
-        set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_C_COMPILER_TARGET}-)
-      endif()
-    elseif(COMPILER_BASENAME MATCHES "qcc(\\.exe)?$")
-      if(CMAKE_C_COMPILER_TARGET MATCHES "gcc_nto([^_le]+)(le)?")
-        set(_CMAKE_TOOLCHAIN_PREFIX nto${CMAKE_MATCH_1}-)
-      endif()
-    endif ()
-
-    # if "llvm-" is part of the prefix, remove it, since llvm doesn't have its own binutils
-    # but uses the regular ar, objcopy, etc. (instead of llvm-objcopy etc.)
-    if ("${_CMAKE_TOOLCHAIN_PREFIX}" MATCHES "(.+-)?llvm-$")
-      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-    endif ()
-  elseif(CMAKE_C_COMPILER_ID MATCHES "TI")
-    # TI compilers are named e.g. cl6x, cl470 or armcl.exe
-    get_filename_component(COMPILER_BASENAME "${CMAKE_C_COMPILER}" NAME)
-    if (COMPILER_BASENAME MATCHES "^(.+)?cl([^.]+)?(\\.exe)?$")
-      set(_CMAKE_TOOLCHAIN_PREFIX "${CMAKE_MATCH_1}")
-      set(_CMAKE_TOOLCHAIN_SUFFIX "${CMAKE_MATCH_2}")
-    endif ()
-  endif()
-
-endif ()
-
-include(CMakeFindBinUtils)
-if(MSVC_C_ARCHITECTURE_ID)
-  include(${CMAKE_ROOT}/Modules/CMakeClDeps.cmake)
-  set(SET_MSVC_C_ARCHITECTURE_ID
-    "set(MSVC_C_ARCHITECTURE_ID ${MSVC_C_ARCHITECTURE_ID})")
-endif()
-
-# configure variables set in this file for fast reload later on
-configure_file(${CMAKE_ROOT}/Modules/CMakeCCompiler.cmake.in
-  ${CMAKE_PLATFORM_INFO_DIR}/CMakeCCompiler.cmake
-  @ONLY
-  )
-set(CMAKE_C_COMPILER_ENV_VAR "CC")
diff --git a/share/cmake-3.2/Modules/CMakeDetermineCXXCompiler.cmake b/share/cmake-3.2/Modules/CMakeDetermineCXXCompiler.cmake
deleted file mode 100644
index 893c454..0000000
--- a/share/cmake-3.2/Modules/CMakeDetermineCXXCompiler.cmake
+++ /dev/null
@@ -1,175 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# determine the compiler to use for C++ programs
-# NOTE, a generator may set CMAKE_CXX_COMPILER before
-# loading this file to force a compiler.
-# use environment variable CXX first if defined by user, next use
-# the cmake variable CMAKE_GENERATOR_CXX which can be defined by a generator
-# as a default compiler
-# If the internal cmake variable _CMAKE_TOOLCHAIN_PREFIX is set, this is used
-# as prefix for the tools (e.g. arm-elf-g++, arm-elf-ar etc.)
-#
-# Sets the following variables:
-#   CMAKE_CXX_COMPILER
-#   CMAKE_COMPILER_IS_GNUCXX
-#   CMAKE_AR
-#   CMAKE_RANLIB
-#
-# If not already set before, it also sets
-#   _CMAKE_TOOLCHAIN_PREFIX
-
-include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
-
-# Load system-specific compiler preferences for this language.
-include(Platform/${CMAKE_SYSTEM_NAME}-CXX OPTIONAL)
-if(NOT CMAKE_CXX_COMPILER_NAMES)
-  set(CMAKE_CXX_COMPILER_NAMES CC)
-endif()
-
-if(${CMAKE_GENERATOR} MATCHES "Visual Studio")
-elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
-  set(CMAKE_CXX_COMPILER_XCODE_TYPE sourcecode.cpp.cpp)
-  _cmake_find_compiler_path(CXX)
-else()
-  if(NOT CMAKE_CXX_COMPILER)
-    set(CMAKE_CXX_COMPILER_INIT NOTFOUND)
-
-    # prefer the environment variable CXX
-    if(NOT $ENV{CXX} STREQUAL "")
-      get_filename_component(CMAKE_CXX_COMPILER_INIT $ENV{CXX} PROGRAM PROGRAM_ARGS CMAKE_CXX_FLAGS_ENV_INIT)
-      if(CMAKE_CXX_FLAGS_ENV_INIT)
-        set(CMAKE_CXX_COMPILER_ARG1 "${CMAKE_CXX_FLAGS_ENV_INIT}" CACHE STRING "First argument to CXX compiler")
-      endif()
-      if(NOT EXISTS ${CMAKE_CXX_COMPILER_INIT})
-        message(FATAL_ERROR "Could not find compiler set in environment variable CXX:\n$ENV{CXX}.\n${CMAKE_CXX_COMPILER_INIT}")
-      endif()
-    endif()
-
-    # next prefer the generator specified compiler
-    if(CMAKE_GENERATOR_CXX)
-      if(NOT CMAKE_CXX_COMPILER_INIT)
-        set(CMAKE_CXX_COMPILER_INIT ${CMAKE_GENERATOR_CXX})
-      endif()
-    endif()
-
-    # finally list compilers to try
-    if(NOT CMAKE_CXX_COMPILER_INIT)
-      set(CMAKE_CXX_COMPILER_LIST CC ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ aCC cl bcc xlC clang++)
-    endif()
-
-    _cmake_find_compiler(CXX)
-  else()
-    _cmake_find_compiler_path(CXX)
-  endif()
-  mark_as_advanced(CMAKE_CXX_COMPILER)
-
-  # Each entry in this list is a set of extra flags to try
-  # adding to the compile line to see if it helps produce
-  # a valid identification file.
-  set(CMAKE_CXX_COMPILER_ID_TEST_FLAGS
-    # Try compiling to an object file only.
-    "-c"
-    )
-endif()
-
-# Build a small source file to identify the compiler.
-if(NOT CMAKE_CXX_COMPILER_ID_RUN)
-  set(CMAKE_CXX_COMPILER_ID_RUN 1)
-
-  # Try to identify the compiler.
-  set(CMAKE_CXX_COMPILER_ID)
-  file(READ ${CMAKE_ROOT}/Modules/CMakePlatformId.h.in
-    CMAKE_CXX_COMPILER_ID_PLATFORM_CONTENT)
-
-  # The IAR compiler produces weird output.
-  # See http://www.cmake.org/Bug/view.php?id=10176#c19598
-  list(APPEND CMAKE_CXX_COMPILER_ID_VENDORS IAR)
-  set(CMAKE_CXX_COMPILER_ID_VENDOR_FLAGS_IAR )
-  set(CMAKE_CXX_COMPILER_ID_VENDOR_REGEX_IAR "IAR .+ Compiler")
-
-  include(${CMAKE_ROOT}/Modules/CMakeDetermineCompilerId.cmake)
-  CMAKE_DETERMINE_COMPILER_ID(CXX CXXFLAGS CMakeCXXCompilerId.cpp)
-
-  # Set old compiler and platform id variables.
-  if("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU")
-    set(CMAKE_COMPILER_IS_GNUCXX 1)
-  endif()
-  if("${CMAKE_CXX_PLATFORM_ID}" MATCHES "MinGW")
-    set(CMAKE_COMPILER_IS_MINGW 1)
-  elseif("${CMAKE_CXX_PLATFORM_ID}" MATCHES "Cygwin")
-    set(CMAKE_COMPILER_IS_CYGWIN 1)
-  endif()
-endif()
-
-if (NOT _CMAKE_TOOLCHAIN_LOCATION)
-  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_CXX_COMPILER}" PATH)
-endif ()
-
-# if we have a g++ cross compiler, they have usually some prefix, like
-# e.g. powerpc-linux-g++, arm-elf-g++ or i586-mingw32msvc-g++ , optionally
-# with a 3-component version number at the end (e.g. arm-eabi-gcc-4.5.2).
-# The other tools of the toolchain usually have the same prefix
-# NAME_WE cannot be used since then this test will fail for names like
-# "arm-unknown-nto-qnx6.3.0-gcc.exe", where BASENAME would be
-# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
-
-
-if (CMAKE_CROSSCOMPILING  AND NOT  _CMAKE_TOOLCHAIN_PREFIX)
-
-  if("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU" OR "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
-    get_filename_component(COMPILER_BASENAME "${CMAKE_CXX_COMPILER}" NAME)
-    if (COMPILER_BASENAME MATCHES "^(.+-)(clan)?[gc]\\+\\+(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
-      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-    elseif("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
-      if(CMAKE_CXX_COMPILER_TARGET)
-        set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_CXX_COMPILER_TARGET}-)
-      endif()
-    elseif(COMPILER_BASENAME MATCHES "QCC(\\.exe)?$")
-      if(CMAKE_CXX_COMPILER_TARGET MATCHES "gcc_nto([^_le]+)(le)?")
-        set(_CMAKE_TOOLCHAIN_PREFIX nto${CMAKE_MATCH_1}-)
-      endif()
-    endif ()
-
-    # if "llvm-" is part of the prefix, remove it, since llvm doesn't have its own binutils
-    # but uses the regular ar, objcopy, etc. (instead of llvm-objcopy etc.)
-    if ("${_CMAKE_TOOLCHAIN_PREFIX}" MATCHES "(.+-)?llvm-$")
-      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-    endif ()
-  elseif("${CMAKE_CXX_COMPILER_ID}" MATCHES "TI")
-    # TI compilers are named e.g. cl6x, cl470 or armcl.exe
-    get_filename_component(COMPILER_BASENAME "${CMAKE_CXX_COMPILER}" NAME)
-    if (COMPILER_BASENAME MATCHES "^(.+)?cl([^.]+)?(\\.exe)?$")
-      set(_CMAKE_TOOLCHAIN_PREFIX "${CMAKE_MATCH_1}")
-      set(_CMAKE_TOOLCHAIN_SUFFIX "${CMAKE_MATCH_2}")
-    endif ()
-
-  endif()
-
-endif ()
-
-include(CMakeFindBinUtils)
-if(MSVC_CXX_ARCHITECTURE_ID)
-  include(${CMAKE_ROOT}/Modules/CMakeClDeps.cmake)
-  set(SET_MSVC_CXX_ARCHITECTURE_ID
-    "set(MSVC_CXX_ARCHITECTURE_ID ${MSVC_CXX_ARCHITECTURE_ID})")
-endif()
-
-# configure all variables set in this file
-configure_file(${CMAKE_ROOT}/Modules/CMakeCXXCompiler.cmake.in
-  ${CMAKE_PLATFORM_INFO_DIR}/CMakeCXXCompiler.cmake
-  @ONLY
-  )
-
-set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
diff --git a/share/cmake-3.2/Modules/CMakeDetermineCompilerId.cmake b/share/cmake-3.2/Modules/CMakeDetermineCompilerId.cmake
deleted file mode 100644
index dfed00e..0000000
--- a/share/cmake-3.2/Modules/CMakeDetermineCompilerId.cmake
+++ /dev/null
@@ -1,591 +0,0 @@
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Function to compile a source file to identify the compiler.  This is
-# used internally by CMake and should not be included by user code.
-# If successful, sets CMAKE_<lang>_COMPILER_ID and CMAKE_<lang>_PLATFORM_ID
-
-function(CMAKE_DETERMINE_COMPILER_ID lang flagvar src)
-  # Make sure the compiler arguments are clean.
-  string(STRIP "${CMAKE_${lang}_COMPILER_ARG1}" CMAKE_${lang}_COMPILER_ID_ARG1)
-  string(REGEX REPLACE " +" ";" CMAKE_${lang}_COMPILER_ID_ARG1 "${CMAKE_${lang}_COMPILER_ID_ARG1}")
-
-  # Make sure user-specified compiler flags are used.
-  if(CMAKE_${lang}_FLAGS)
-    set(CMAKE_${lang}_COMPILER_ID_FLAGS ${CMAKE_${lang}_FLAGS})
-  else()
-    set(CMAKE_${lang}_COMPILER_ID_FLAGS $ENV{${flagvar}})
-  endif()
-  string(REPLACE " " ";" CMAKE_${lang}_COMPILER_ID_FLAGS_LIST "${CMAKE_${lang}_COMPILER_ID_FLAGS}")
-
-  # Compute the directory in which to run the test.
-  set(CMAKE_${lang}_COMPILER_ID_DIR ${CMAKE_PLATFORM_INFO_DIR}/CompilerId${lang})
-
-  # Try building with no extra flags and then try each set
-  # of helper flags.  Stop when the compiler is identified.
-  foreach(flags "" ${CMAKE_${lang}_COMPILER_ID_TEST_FLAGS})
-    if(NOT CMAKE_${lang}_COMPILER_ID)
-      CMAKE_DETERMINE_COMPILER_ID_BUILD("${lang}" "${flags}" "${src}")
-      foreach(file ${COMPILER_${lang}_PRODUCED_FILES})
-        CMAKE_DETERMINE_COMPILER_ID_CHECK("${lang}" "${CMAKE_${lang}_COMPILER_ID_DIR}/${file}" "${src}")
-      endforeach()
-    endif()
-  endforeach()
-
-  # If the compiler is still unknown, try to query its vendor.
-  if(CMAKE_${lang}_COMPILER AND NOT CMAKE_${lang}_COMPILER_ID)
-    CMAKE_DETERMINE_COMPILER_ID_VENDOR(${lang})
-  endif()
-
-  if (COMPILER_QNXNTO AND CMAKE_${lang}_COMPILER_ID STREQUAL "GNU")
-    execute_process(
-      COMMAND "${CMAKE_${lang}_COMPILER}"
-      -V
-      OUTPUT_VARIABLE output ERROR_VARIABLE output
-      RESULT_VARIABLE result
-      TIMEOUT 10
-      )
-    if (output MATCHES "targets available")
-      set(CMAKE_${lang}_COMPILER_ID QCC)
-      # http://community.qnx.com/sf/discussion/do/listPosts/projects.community/discussion.qnx_momentics_community_support.topc3555?_pagenum=2
-      # The qcc driver does not itself have a version.
-    endif()
-  endif()
-
-  # if the format is unknown after all files have been checked, put "Unknown" in the cache
-  if(NOT CMAKE_EXECUTABLE_FORMAT)
-    set(CMAKE_EXECUTABLE_FORMAT "Unknown" CACHE INTERNAL "Executable file format")
-  endif()
-
-  # Display the final identification result.
-  if(CMAKE_${lang}_COMPILER_ID)
-    if(CMAKE_${lang}_COMPILER_VERSION)
-      set(_version " ${CMAKE_${lang}_COMPILER_VERSION}")
-    else()
-      set(_version "")
-    endif()
-    message(STATUS "The ${lang} compiler identification is "
-      "${CMAKE_${lang}_COMPILER_ID}${_version}")
-  else()
-    message(STATUS "The ${lang} compiler identification is unknown")
-  endif()
-
-  # Check if compiler id detection gave us the compiler tool.
-  if(CMAKE_${lang}_COMPILER_ID_TOOL)
-    set(CMAKE_${lang}_COMPILER "${CMAKE_${lang}_COMPILER_ID_TOOL}" PARENT_SCOPE)
-  elseif(NOT CMAKE_${lang}_COMPILER)
-    set(CMAKE_${lang}_COMPILER "CMAKE_${lang}_COMPILER-NOTFOUND" PARENT_SCOPE)
-  endif()
-
-  set(CMAKE_${lang}_COMPILER_ID "${CMAKE_${lang}_COMPILER_ID}" PARENT_SCOPE)
-  set(CMAKE_${lang}_PLATFORM_ID "${CMAKE_${lang}_PLATFORM_ID}" PARENT_SCOPE)
-  set(MSVC_${lang}_ARCHITECTURE_ID "${MSVC_${lang}_ARCHITECTURE_ID}"
-    PARENT_SCOPE)
-  set(CMAKE_${lang}_COMPILER_VERSION "${CMAKE_${lang}_COMPILER_VERSION}" PARENT_SCOPE)
-  set(CMAKE_${lang}_SIMULATE_ID "${CMAKE_${lang}_SIMULATE_ID}" PARENT_SCOPE)
-  set(CMAKE_${lang}_SIMULATE_VERSION "${CMAKE_${lang}_SIMULATE_VERSION}" PARENT_SCOPE)
-endfunction()
-
-include(CMakeCompilerIdDetection)
-
-#-----------------------------------------------------------------------------
-# Function to write the compiler id source file.
-function(CMAKE_DETERMINE_COMPILER_ID_WRITE lang src)
-  find_file(src_in ${src}.in PATHS ${CMAKE_ROOT}/Modules ${CMAKE_MODULE_PATH} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
-  file(READ ${src_in} ID_CONTENT_IN)
-
-  compiler_id_detection(CMAKE_${lang}_COMPILER_ID_CONTENT ${lang}
-    ID_STRING
-    VERSION_STRINGS
-    PLATFORM_DEFAULT_COMPILER
-  )
-
-  unset(src_in CACHE)
-  string(CONFIGURE "${ID_CONTENT_IN}" ID_CONTENT_OUT @ONLY)
-  file(WRITE ${CMAKE_${lang}_COMPILER_ID_DIR}/${src} "${ID_CONTENT_OUT}")
-endfunction()
-
-#-----------------------------------------------------------------------------
-# Function to build the compiler id source file and look for output
-# files.
-function(CMAKE_DETERMINE_COMPILER_ID_BUILD lang testflags src)
-  # Create a clean working directory.
-  file(REMOVE_RECURSE ${CMAKE_${lang}_COMPILER_ID_DIR})
-  file(MAKE_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR})
-  CMAKE_DETERMINE_COMPILER_ID_WRITE("${lang}" "${src}")
-
-  # Construct a description of this test case.
-  set(COMPILER_DESCRIPTION
-    "Compiler: ${CMAKE_${lang}_COMPILER} ${CMAKE_${lang}_COMPILER_ID_ARG1}
-Build flags: ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
-Id flags: ${testflags}
-")
-
-  # Compile the compiler identification source.
-  if(CMAKE_GENERATOR STREQUAL "Visual Studio 6" AND
-      lang STREQUAL "Fortran")
-    set(CMAKE_${lang}_COMPILER_ID_RESULT 1)
-    set(CMAKE_${lang}_COMPILER_ID_OUTPUT "No Intel Fortran in VS 6")
-  elseif("${CMAKE_GENERATOR}" MATCHES "Visual Studio ([0-9]+)")
-    set(vs_version ${CMAKE_MATCH_1})
-    set(id_platform ${CMAKE_VS_PLATFORM_NAME})
-    set(id_lang "${lang}")
-    set(id_cl cl.exe)
-    if(CMAKE_VS_PLATFORM_NAME STREQUAL "Tegra-Android")
-      set(v NsightTegra)
-      set(ext vcxproj)
-      if(lang STREQUAL CXX)
-        set(id_gcc g++)
-        set(id_clang clang++)
-      else()
-        set(id_gcc gcc)
-        set(id_clang clang)
-      endif()
-    elseif(lang STREQUAL Fortran)
-      set(v Intel)
-      set(ext vfproj)
-      set(id_cl ifort.exe)
-    elseif(NOT "${vs_version}" VERSION_LESS 10)
-      set(v 10)
-      set(ext vcxproj)
-    elseif(NOT "${vs_version}" VERSION_LESS 7)
-      set(id_version ${vs_version}.00)
-      set(v 7)
-      set(ext vcproj)
-    else()
-      set(v 6)
-      set(ext dsp)
-    endif()
-    if("${id_platform}" STREQUAL "Itanium")
-      set(id_platform ia64)
-    endif()
-    if(CMAKE_VS_PLATFORM_TOOLSET)
-      if(CMAKE_VS_PLATFORM_NAME STREQUAL "Tegra-Android")
-        set(id_toolset "<NdkToolchainVersion>${CMAKE_VS_PLATFORM_TOOLSET}</NdkToolchainVersion>")
-      else()
-        set(id_toolset "<PlatformToolset>${CMAKE_VS_PLATFORM_TOOLSET}</PlatformToolset>")
-        if(CMAKE_VS_PLATFORM_TOOLSET MATCHES "Intel")
-          set(id_cl icl.exe)
-        endif()
-      endif()
-    else()
-      set(id_toolset "")
-    endif()
-    if(CMAKE_SYSTEM_NAME STREQUAL "WindowsPhone")
-      set(id_system "<ApplicationType>Windows Phone</ApplicationType>")
-    elseif(CMAKE_SYSTEM_NAME STREQUAL "WindowsStore")
-      set(id_system "<ApplicationType>Windows Store</ApplicationType>")
-    else()
-      set(id_system "")
-    endif()
-    if(id_system AND CMAKE_SYSTEM_VERSION)
-      set(id_system_version "<ApplicationTypeRevision>${CMAKE_SYSTEM_VERSION}</ApplicationTypeRevision>")
-    else()
-      set(id_system_version "")
-    endif()
-    if(id_platform STREQUAL ARM)
-      set(id_WindowsSDKDesktopARMSupport "<WindowsSDKDesktopARMSupport>true</WindowsSDKDesktopARMSupport>")
-    else()
-      set(id_WindowsSDKDesktopARMSupport "")
-    endif()
-    if(CMAKE_VS_WINCE_VERSION)
-      set(id_entrypoint "mainACRTStartup")
-      if("${vs_version}" VERSION_LESS 9)
-        set(id_subsystem 9)
-      else()
-        set(id_subsystem 8)
-      endif()
-    else()
-      set(id_subsystem 1)
-    endif()
-    set(id_dir ${CMAKE_${lang}_COMPILER_ID_DIR})
-    get_filename_component(id_src "${src}" NAME)
-    configure_file(${CMAKE_ROOT}/Modules/CompilerId/VS-${v}.${ext}.in
-      ${id_dir}/CompilerId${lang}.${ext} @ONLY)
-    if(CMAKE_VS_MSBUILD_COMMAND AND NOT lang STREQUAL "Fortran")
-      set(command "${CMAKE_VS_MSBUILD_COMMAND}" "CompilerId${lang}.${ext}"
-        "/p:Configuration=Debug" "/p:Platform=${id_platform}" "/p:VisualStudioVersion=${vs_version}.0"
-        )
-    elseif(CMAKE_VS_DEVENV_COMMAND)
-      set(command "${CMAKE_VS_DEVENV_COMMAND}" "CompilerId${lang}.${ext}" "/build" "Debug")
-    elseif(CMAKE_VS_MSDEV_COMMAND)
-      set(command "${CMAKE_VS_MSDEV_COMMAND}" "CompilerId${lang}.${ext}" "/make")
-    else()
-      set(command "")
-    endif()
-    if(command)
-      execute_process(
-        COMMAND ${command}
-        WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
-        OUTPUT_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
-        ERROR_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
-        RESULT_VARIABLE CMAKE_${lang}_COMPILER_ID_RESULT
-        )
-    else()
-      set(CMAKE_${lang}_COMPILER_ID_RESULT 1)
-      set(CMAKE_${lang}_COMPILER_ID_OUTPUT "VS environment not known to support ${lang}")
-    endif()
-    # Match the compiler location line printed out.
-    if("${CMAKE_${lang}_COMPILER_ID_OUTPUT}" MATCHES "CMAKE_${lang}_COMPILER=([^%\r\n]+)[\r\n]")
-      # Strip VS diagnostic output from the end of the line.
-      string(REGEX REPLACE " \\(TaskId:[0-9]*\\)$" "" _comp "${CMAKE_MATCH_1}")
-      if(EXISTS "${_comp}")
-        file(TO_CMAKE_PATH "${_comp}" _comp)
-        set(CMAKE_${lang}_COMPILER_ID_TOOL "${_comp}" PARENT_SCOPE)
-      endif()
-    endif()
-  elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
-    set(id_lang "${lang}")
-    set(id_type ${CMAKE_${lang}_COMPILER_XCODE_TYPE})
-    set(id_dir ${CMAKE_${lang}_COMPILER_ID_DIR})
-    get_filename_component(id_src "${src}" NAME)
-    if(CMAKE_XCODE_PLATFORM_TOOLSET)
-      set(id_toolset "GCC_VERSION = ${CMAKE_XCODE_PLATFORM_TOOLSET};")
-    else()
-      set(id_toolset "")
-    endif()
-    if(CMAKE_OSX_DEPLOYMENT_TARGET)
-      set(id_deployment_target
-        "MACOSX_DEPLOYMENT_TARGET = \"${CMAKE_OSX_DEPLOYMENT_TARGET}\";")
-    else()
-      set(id_deployment_target "")
-    endif()
-    set(id_product_type "com.apple.product-type.tool")
-    if(CMAKE_OSX_SYSROOT)
-      set(id_sdkroot "SDKROOT = \"${CMAKE_OSX_SYSROOT}\";")
-      if(CMAKE_OSX_SYSROOT MATCHES "(^|/)[Ii][Pp][Hh][Oo][Nn][Ee]")
-        set(id_product_type "com.apple.product-type.bundle.unit-test")
-      endif()
-    else()
-      set(id_sdkroot "")
-    endif()
-    if(NOT ${XCODE_VERSION} VERSION_LESS 3)
-      set(v 3)
-      set(ext xcodeproj)
-    elseif(NOT ${XCODE_VERSION} VERSION_LESS 2)
-      set(v 2)
-      set(ext xcodeproj)
-    else()
-      set(v 1)
-      set(ext xcode)
-    endif()
-    configure_file(${CMAKE_ROOT}/Modules/CompilerId/Xcode-${v}.pbxproj.in
-      ${id_dir}/CompilerId${lang}.${ext}/project.pbxproj @ONLY)
-    unset(_ENV_MACOSX_DEPLOYMENT_TARGET)
-    if(DEFINED ENV{MACOSX_DEPLOYMENT_TARGET})
-      set(_ENV_MACOSX_DEPLOYMENT_TARGET "$ENV{MACOSX_DEPLOYMENT_TARGET}")
-      set(ENV{MACOSX_DEPLOYMENT_TARGET} "")
-    endif()
-    execute_process(COMMAND xcodebuild
-      WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
-      OUTPUT_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
-      ERROR_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
-      RESULT_VARIABLE CMAKE_${lang}_COMPILER_ID_RESULT
-      )
-    if(DEFINED _ENV_MACOSX_DEPLOYMENT_TARGET)
-      set(ENV{MACOSX_DEPLOYMENT_TARGET} "${_ENV_MACOSX_DEPLOYMENT_TARGET}")
-    endif()
-
-    # Match the link line from xcodebuild output of the form
-    #  Ld ...
-    #      ...
-    #      /path/to/cc ...CompilerId${lang}/...
-    # to extract the compiler front-end for the language.
-    if("${CMAKE_${lang}_COMPILER_ID_OUTPUT}" MATCHES "\nLd[^\n]*(\n[ \t]+[^\n]*)*\n[ \t]+([^ \t\r\n]+)[^\r\n]*-o[^\r\n]*CompilerId${lang}/(\\./)?(CompilerId${lang}.xctest/)?CompilerId${lang}[ \t\n\\\"]")
-      set(_comp "${CMAKE_MATCH_2}")
-      if(EXISTS "${_comp}")
-        set(CMAKE_${lang}_COMPILER_ID_TOOL "${_comp}" PARENT_SCOPE)
-      endif()
-    endif()
-  else()
-    if(COMMAND EXECUTE_PROCESS)
-      execute_process(
-        COMMAND "${CMAKE_${lang}_COMPILER}"
-                ${CMAKE_${lang}_COMPILER_ID_ARG1}
-                ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
-                ${testflags}
-                "${src}"
-        WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
-        OUTPUT_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
-        ERROR_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
-        RESULT_VARIABLE CMAKE_${lang}_COMPILER_ID_RESULT
-        )
-    else()
-      exec_program(
-        "${CMAKE_${lang}_COMPILER}" ${CMAKE_${lang}_COMPILER_ID_DIR}
-        ARGS ${CMAKE_${lang}_COMPILER_ID_ARG1}
-             ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
-             ${testflags}
-             \"${src}\"
-        OUTPUT_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
-        RETURN_VALUE CMAKE_${lang}_COMPILER_ID_RESULT
-        )
-    endif()
-  endif()
-
-  # Check the result of compilation.
-  if(CMAKE_${lang}_COMPILER_ID_RESULT
-     # Intel Fortran warns and ignores preprocessor lines without /fpp
-     OR CMAKE_${lang}_COMPILER_ID_OUTPUT MATCHES "Bad # preprocessor line"
-     )
-    # Compilation failed.
-    set(MSG
-      "Compiling the ${lang} compiler identification source file \"${src}\" failed.
-${COMPILER_DESCRIPTION}
-The output was:
-${CMAKE_${lang}_COMPILER_ID_RESULT}
-${CMAKE_${lang}_COMPILER_ID_OUTPUT}
-
-")
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "${MSG}")
-    #if(NOT CMAKE_${lang}_COMPILER_ID_ALLOW_FAIL)
-    #  message(FATAL_ERROR "${MSG}")
-    #endif()
-
-    # No output files should be inspected.
-    set(COMPILER_${lang}_PRODUCED_FILES)
-  else()
-    # Compilation succeeded.
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-      "Compiling the ${lang} compiler identification source file \"${src}\" succeeded.
-${COMPILER_DESCRIPTION}
-The output was:
-${CMAKE_${lang}_COMPILER_ID_RESULT}
-${CMAKE_${lang}_COMPILER_ID_OUTPUT}
-
-")
-
-    # Find the executable produced by the compiler, try all files in the
-    # binary dir.
-    file(GLOB files
-      RELATIVE ${CMAKE_${lang}_COMPILER_ID_DIR}
-
-      # normal case
-      ${CMAKE_${lang}_COMPILER_ID_DIR}/*
-
-      # com.apple.package-type.bundle.unit-test
-      ${CMAKE_${lang}_COMPILER_ID_DIR}/*.xctest/*
-      )
-    list(REMOVE_ITEM files "${src}")
-    set(COMPILER_${lang}_PRODUCED_FILES "")
-    foreach(file ${files})
-      if(NOT IS_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}/${file})
-        list(APPEND COMPILER_${lang}_PRODUCED_FILES ${file})
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-          "Compilation of the ${lang} compiler identification source \""
-          "${src}\" produced \"${file}\"\n\n")
-      endif()
-    endforeach()
-
-    if(NOT COMPILER_${lang}_PRODUCED_FILES)
-      # No executable was found.
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Compilation of the ${lang} compiler identification source \""
-        "${src}\" did not produce an executable in \""
-        "${CMAKE_${lang}_COMPILER_ID_DIR}\".\n\n")
-    endif()
-  endif()
-
-  # Return the files produced by the compilation.
-  set(COMPILER_${lang}_PRODUCED_FILES "${COMPILER_${lang}_PRODUCED_FILES}" PARENT_SCOPE)
-endfunction()
-
-#-----------------------------------------------------------------------------
-# Function to extract the compiler id from an executable.
-function(CMAKE_DETERMINE_COMPILER_ID_CHECK lang file)
-  # Look for a compiler id if not yet known.
-  if(NOT CMAKE_${lang}_COMPILER_ID)
-    # Read the compiler identification string from the executable file.
-    set(COMPILER_ID)
-    set(COMPILER_VERSION)
-    set(PLATFORM_ID)
-    set(ARCHITECTURE_ID)
-    set(SIMULATE_ID)
-    set(SIMULATE_VERSION)
-    file(STRINGS ${file}
-      CMAKE_${lang}_COMPILER_ID_STRINGS LIMIT_COUNT 6 REGEX "INFO:[A-Za-z0-9_]+\\[[^]]*\\]")
-    set(COMPILER_ID_TWICE)
-    foreach(info ${CMAKE_${lang}_COMPILER_ID_STRINGS})
-      if("${info}" MATCHES "INFO:compiler\\[([^]\"]*)\\]")
-        if(COMPILER_ID)
-          set(COMPILER_ID_TWICE 1)
-        endif()
-        set(COMPILER_ID "${CMAKE_MATCH_1}")
-      endif()
-      if("${info}" MATCHES "INFO:platform\\[([^]\"]*)\\]")
-        set(PLATFORM_ID "${CMAKE_MATCH_1}")
-      endif()
-      if("${info}" MATCHES "INFO:arch\\[([^]\"]*)\\]")
-        set(ARCHITECTURE_ID "${CMAKE_MATCH_1}")
-      endif()
-      if("${info}" MATCHES "INFO:compiler_version\\[([^]\"]*)\\]")
-        string(REGEX REPLACE "^0+([0-9])" "\\1" COMPILER_VERSION "${CMAKE_MATCH_1}")
-        string(REGEX REPLACE "\\.0+([0-9])" ".\\1" COMPILER_VERSION "${COMPILER_VERSION}")
-      endif()
-      if("${info}" MATCHES "INFO:simulate\\[([^]\"]*)\\]")
-        set(SIMULATE_ID "${CMAKE_MATCH_1}")
-      endif()
-      if("${info}" MATCHES "INFO:simulate_version\\[([^]\"]*)\\]")
-        string(REGEX REPLACE "^0+([0-9])" "\\1" SIMULATE_VERSION "${CMAKE_MATCH_1}")
-        string(REGEX REPLACE "\\.0+([0-9])" ".\\1" SIMULATE_VERSION "${SIMULATE_VERSION}")
-      endif()
-      if("${info}" MATCHES "INFO:qnxnto\\[\\]")
-        set(COMPILER_QNXNTO 1)
-      endif()
-    endforeach()
-
-    # Detect the exact architecture from the PE header.
-    if(WIN32)
-      # The offset to the PE signature is stored at 0x3c.
-      file(READ ${file} peoffsethex LIMIT 1 OFFSET 60 HEX)
-      string(SUBSTRING "${peoffsethex}" 0 1 peoffsethex1)
-      string(SUBSTRING "${peoffsethex}" 1 1 peoffsethex2)
-      set(peoffsetexpression "${peoffsethex1} * 16 + ${peoffsethex2}")
-      string(REPLACE "a" "10" peoffsetexpression "${peoffsetexpression}")
-      string(REPLACE "b" "11" peoffsetexpression "${peoffsetexpression}")
-      string(REPLACE "c" "12" peoffsetexpression "${peoffsetexpression}")
-      string(REPLACE "d" "13" peoffsetexpression "${peoffsetexpression}")
-      string(REPLACE "e" "14" peoffsetexpression "${peoffsetexpression}")
-      string(REPLACE "f" "15" peoffsetexpression "${peoffsetexpression}")
-      math(EXPR peoffset "${peoffsetexpression}")
-
-      file(READ ${file} peheader LIMIT 6 OFFSET ${peoffset} HEX)
-      if(peheader STREQUAL "50450000a201")
-        set(ARCHITECTURE_ID "SH3")
-      elseif(peheader STREQUAL "50450000a301")
-        set(ARCHITECTURE_ID "SH3DSP")
-      elseif(peheader STREQUAL "50450000a601")
-        set(ARCHITECTURE_ID "SH4")
-      elseif(peheader STREQUAL "50450000a801")
-        set(ARCHITECTURE_ID "SH5")
-      elseif(peheader STREQUAL "50450000c201")
-        set(ARCHITECTURE_ID "THUMB")
-      endif()
-    endif()
-
-    # Check if a valid compiler and platform were found.
-    if(COMPILER_ID AND NOT COMPILER_ID_TWICE)
-      set(CMAKE_${lang}_COMPILER_ID "${COMPILER_ID}")
-      set(CMAKE_${lang}_PLATFORM_ID "${PLATFORM_ID}")
-      set(MSVC_${lang}_ARCHITECTURE_ID "${ARCHITECTURE_ID}")
-      set(CMAKE_${lang}_COMPILER_VERSION "${COMPILER_VERSION}")
-      set(CMAKE_${lang}_SIMULATE_ID "${SIMULATE_ID}")
-      set(CMAKE_${lang}_SIMULATE_VERSION "${SIMULATE_VERSION}")
-    endif()
-
-    # Check the compiler identification string.
-    if(CMAKE_${lang}_COMPILER_ID)
-      # The compiler identification was found.
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "The ${lang} compiler identification is ${CMAKE_${lang}_COMPILER_ID}, found in \""
-        "${file}\"\n\n")
-    else()
-      # The compiler identification could not be found.
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "The ${lang} compiler identification could not be found in \""
-        "${file}\"\n\n")
-    endif()
-  endif()
-
-  # try to figure out the executable format: ELF, COFF, Mach-O
-  if(NOT CMAKE_EXECUTABLE_FORMAT)
-    file(READ ${file} CMAKE_EXECUTABLE_MAGIC LIMIT 4 HEX)
-
-    # ELF files start with 0x7f"ELF"
-    if("${CMAKE_EXECUTABLE_MAGIC}" STREQUAL "7f454c46")
-      set(CMAKE_EXECUTABLE_FORMAT "ELF" CACHE INTERNAL "Executable file format")
-    endif()
-
-#    # COFF (.exe) files start with "MZ"
-#    if("${CMAKE_EXECUTABLE_MAGIC}" MATCHES "4d5a....")
-#      set(CMAKE_EXECUTABLE_FORMAT "COFF" CACHE STRING "Executable file format")
-#    endif()
-#
-#    # Mach-O files start with CAFEBABE or FEEDFACE, according to http://radio.weblogs.com/0100490/2003/01/28.html
-#    if("${CMAKE_EXECUTABLE_MAGIC}" MATCHES "cafebabe")
-#      set(CMAKE_EXECUTABLE_FORMAT "MACHO" CACHE STRING "Executable file format")
-#    endif()
-#    if("${CMAKE_EXECUTABLE_MAGIC}" MATCHES "feedface")
-#      set(CMAKE_EXECUTABLE_FORMAT "MACHO" CACHE STRING "Executable file format")
-#    endif()
-
-  endif()
-  if(NOT DEFINED CMAKE_EXECUTABLE_FORMAT)
-    set(CMAKE_EXECUTABLE_FORMAT)
-  endif()
-  # Return the information extracted.
-  set(CMAKE_${lang}_COMPILER_ID "${CMAKE_${lang}_COMPILER_ID}" PARENT_SCOPE)
-  set(CMAKE_${lang}_PLATFORM_ID "${CMAKE_${lang}_PLATFORM_ID}" PARENT_SCOPE)
-  set(MSVC_${lang}_ARCHITECTURE_ID "${MSVC_${lang}_ARCHITECTURE_ID}"
-    PARENT_SCOPE)
-  set(CMAKE_${lang}_COMPILER_VERSION "${CMAKE_${lang}_COMPILER_VERSION}" PARENT_SCOPE)
-  set(CMAKE_${lang}_SIMULATE_ID "${CMAKE_${lang}_SIMULATE_ID}" PARENT_SCOPE)
-  set(CMAKE_${lang}_SIMULATE_VERSION "${CMAKE_${lang}_SIMULATE_VERSION}" PARENT_SCOPE)
-  set(CMAKE_EXECUTABLE_FORMAT "${CMAKE_EXECUTABLE_FORMAT}" PARENT_SCOPE)
-  set(COMPILER_QNXNTO "${COMPILER_QNXNTO}" PARENT_SCOPE)
-endfunction()
-
-#-----------------------------------------------------------------------------
-# Function to query the compiler vendor.
-# This uses a table with entries of the form
-#   list(APPEND CMAKE_${lang}_COMPILER_ID_VENDORS ${vendor})
-#   set(CMAKE_${lang}_COMPILER_ID_VENDOR_FLAGS_${vendor} -some-vendor-flag)
-#   set(CMAKE_${lang}_COMPILER_ID_VENDOR_REGEX_${vendor} "Some Vendor Output")
-# We try running the compiler with the flag for each vendor and
-# matching its regular expression in the output.
-function(CMAKE_DETERMINE_COMPILER_ID_VENDOR lang)
-
-  if(NOT CMAKE_${lang}_COMPILER_ID_DIR)
-    # We get here when this function is called not from within CMAKE_DETERMINE_COMPILER_ID()
-    # This is done e.g. for detecting the compiler ID for assemblers.
-    # Compute the directory in which to run the test and Create a clean working directory.
-    set(CMAKE_${lang}_COMPILER_ID_DIR ${CMAKE_PLATFORM_INFO_DIR}/CompilerId${lang})
-    file(REMOVE_RECURSE ${CMAKE_${lang}_COMPILER_ID_DIR})
-    file(MAKE_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR})
-  endif()
-
-
-  foreach(vendor ${CMAKE_${lang}_COMPILER_ID_VENDORS})
-    set(flags ${CMAKE_${lang}_COMPILER_ID_VENDOR_FLAGS_${vendor}})
-    set(regex ${CMAKE_${lang}_COMPILER_ID_VENDOR_REGEX_${vendor}})
-    execute_process(
-      COMMAND "${CMAKE_${lang}_COMPILER}"
-      ${CMAKE_${lang}_COMPILER_ID_ARG1}
-      ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
-      ${flags}
-      WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
-      OUTPUT_VARIABLE output ERROR_VARIABLE output
-      RESULT_VARIABLE result
-      TIMEOUT 10
-      )
-
-    if("${output}" MATCHES "${regex}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Checking whether the ${lang} compiler is ${vendor} using \"${flags}\" "
-        "matched \"${regex}\":\n${output}")
-      set(CMAKE_${lang}_COMPILER_ID "${vendor}" PARENT_SCOPE)
-      break()
-    else()
-      if("${result}" MATCHES  "timeout")
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-          "Checking whether the ${lang} compiler is ${vendor} using \"${flags}\" "
-          "terminated after 10 s due to timeout.")
-      else()
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-          "Checking whether the ${lang} compiler is ${vendor} using \"${flags}\" "
-          "did not match \"${regex}\":\n${output}")
-       endif()
-    endif()
-  endforeach()
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeDetermineFortranCompiler.cmake b/share/cmake-3.2/Modules/CMakeDetermineFortranCompiler.cmake
deleted file mode 100644
index a4bb86c..0000000
--- a/share/cmake-3.2/Modules/CMakeDetermineFortranCompiler.cmake
+++ /dev/null
@@ -1,204 +0,0 @@
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# determine the compiler to use for Fortran programs
-# NOTE, a generator may set CMAKE_Fortran_COMPILER before
-# loading this file to force a compiler.
-# use environment variable FC first if defined by user, next use
-# the cmake variable CMAKE_GENERATOR_FC which can be defined by a generator
-# as a default compiler
-
-include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
-include(Platform/${CMAKE_SYSTEM_NAME}-Fortran OPTIONAL)
-if(NOT CMAKE_Fortran_COMPILER_NAMES)
-  set(CMAKE_Fortran_COMPILER_NAMES f95)
-endif()
-
-if(${CMAKE_GENERATOR} MATCHES "Visual Studio")
-elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
-  set(CMAKE_Fortran_COMPILER_XCODE_TYPE sourcecode.fortran.f90)
-  _cmake_find_compiler_path(Fortran)
-else()
-  if(NOT CMAKE_Fortran_COMPILER)
-    # prefer the environment variable CC
-    if(NOT $ENV{FC} STREQUAL "")
-      get_filename_component(CMAKE_Fortran_COMPILER_INIT $ENV{FC} PROGRAM PROGRAM_ARGS CMAKE_Fortran_FLAGS_ENV_INIT)
-      if(CMAKE_Fortran_FLAGS_ENV_INIT)
-        set(CMAKE_Fortran_COMPILER_ARG1 "${CMAKE_Fortran_FLAGS_ENV_INIT}" CACHE STRING "First argument to Fortran compiler")
-      endif()
-      if(EXISTS ${CMAKE_Fortran_COMPILER_INIT})
-      else()
-        message(FATAL_ERROR "Could not find compiler set in environment variable FC:\n$ENV{FC}.")
-      endif()
-    endif()
-
-    # next try prefer the compiler specified by the generator
-    if(CMAKE_GENERATOR_FC)
-      if(NOT CMAKE_Fortran_COMPILER_INIT)
-        set(CMAKE_Fortran_COMPILER_INIT ${CMAKE_GENERATOR_FC})
-      endif()
-    endif()
-
-    # finally list compilers to try
-    if(NOT CMAKE_Fortran_COMPILER_INIT)
-      # Known compilers:
-      #  f77/f90/f95: generic compiler names
-      #  g77: GNU Fortran 77 compiler
-      #  gfortran: putative GNU Fortran 95+ compiler (in progress)
-      #  fort77: native F77 compiler under HP-UX (and some older Crays)
-      #  frt: Fujitsu F77 compiler
-      #  pathf90/pathf95/pathf2003: PathScale Fortran compiler
-      #  pgf77/pgf90/pgf95/pgfortran: Portland Group F77/F90/F95 compilers
-      #  xlf/xlf90/xlf95: IBM (AIX) F77/F90/F95 compilers
-      #  lf95: Lahey-Fujitsu F95 compiler
-      #  fl32: Microsoft Fortran 77 "PowerStation" compiler
-      #  af77: Apogee F77 compiler for Intergraph hardware running CLIX
-      #  epcf90: "Edinburgh Portable Compiler" F90
-      #  fort: Compaq (now HP) Fortran 90/95 compiler for Tru64 and Linux/Alpha
-      #  ifc: Intel Fortran 95 compiler for Linux/x86
-      #  efc: Intel Fortran 95 compiler for IA64
-      #
-      #  The order is 95 or newer compilers first, then 90,
-      #  then 77 or older compilers, gnu is always last in the group,
-      #  so if you paid for a compiler it is picked by default.
-      set(CMAKE_Fortran_COMPILER_LIST
-        ifort ifc af95 af90 efc f95 pathf2003 pathf95 pgf95 pgfortran lf95 xlf95
-        fort gfortran gfortran-4 g95 f90 pathf90 pgf90 xlf90 epcf90 fort77
-        frt pgf77 xlf fl32 af77 g77 f77
-        )
-
-      # Vendor-specific compiler names.
-      set(_Fortran_COMPILER_NAMES_GNU       gfortran gfortran-4 g95 g77)
-      set(_Fortran_COMPILER_NAMES_Intel     ifort ifc efc)
-      set(_Fortran_COMPILER_NAMES_Absoft    af95 af90 af77)
-      set(_Fortran_COMPILER_NAMES_PGI       pgf95 pgfortran pgf90 pgf77)
-      set(_Fortran_COMPILER_NAMES_PathScale pathf2003 pathf95 pathf90)
-      set(_Fortran_COMPILER_NAMES_XL        xlf)
-      set(_Fortran_COMPILER_NAMES_VisualAge xlf95 xlf90 xlf)
-    endif()
-
-    _cmake_find_compiler(Fortran)
-
-  else()
-    _cmake_find_compiler_path(Fortran)
-  endif()
-  mark_as_advanced(CMAKE_Fortran_COMPILER)
-
-  # Each entry in this list is a set of extra flags to try
-  # adding to the compile line to see if it helps produce
-  # a valid identification executable.
-  set(CMAKE_Fortran_COMPILER_ID_TEST_FLAGS
-    # Try compiling to an object file only.
-    "-c"
-
-    # Intel on windows does not preprocess by default.
-    "-fpp"
-    )
-endif()
-
-# Build a small source file to identify the compiler.
-if(NOT CMAKE_Fortran_COMPILER_ID_RUN)
-  set(CMAKE_Fortran_COMPILER_ID_RUN 1)
-
-  # Table of per-vendor compiler id flags with expected output.
-  list(APPEND CMAKE_Fortran_COMPILER_ID_VENDORS Compaq)
-  set(CMAKE_Fortran_COMPILER_ID_VENDOR_FLAGS_Compaq "-what")
-  set(CMAKE_Fortran_COMPILER_ID_VENDOR_REGEX_Compaq "Compaq Visual Fortran")
-  list(APPEND CMAKE_Fortran_COMPILER_ID_VENDORS NAG) # Numerical Algorithms Group
-  set(CMAKE_Fortran_COMPILER_ID_VENDOR_FLAGS_NAG "-V")
-  set(CMAKE_Fortran_COMPILER_ID_VENDOR_REGEX_NAG "NAG Fortran Compiler")
-
-  # Try to identify the compiler.
-  set(CMAKE_Fortran_COMPILER_ID)
-  include(${CMAKE_ROOT}/Modules/CMakeDetermineCompilerId.cmake)
-  CMAKE_DETERMINE_COMPILER_ID(Fortran FFLAGS CMakeFortranCompilerId.F)
-
-  # Fall back to old is-GNU test.
-  if(NOT CMAKE_Fortran_COMPILER_ID)
-    exec_program(${CMAKE_Fortran_COMPILER}
-      ARGS ${CMAKE_Fortran_COMPILER_ID_FLAGS_LIST} -E "\"${CMAKE_ROOT}/Modules/CMakeTestGNU.c\""
-      OUTPUT_VARIABLE CMAKE_COMPILER_OUTPUT RETURN_VALUE CMAKE_COMPILER_RETURN)
-    if(NOT CMAKE_COMPILER_RETURN)
-      if("${CMAKE_COMPILER_OUTPUT}" MATCHES "THIS_IS_GNU")
-        set(CMAKE_Fortran_COMPILER_ID "GNU")
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-          "Determining if the Fortran compiler is GNU succeeded with "
-          "the following output:\n${CMAKE_COMPILER_OUTPUT}\n\n")
-      else()
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-          "Determining if the Fortran compiler is GNU failed with "
-          "the following output:\n${CMAKE_COMPILER_OUTPUT}\n\n")
-      endif()
-      if(NOT CMAKE_Fortran_PLATFORM_ID)
-        if("${CMAKE_COMPILER_OUTPUT}" MATCHES "THIS_IS_MINGW")
-          set(CMAKE_Fortran_PLATFORM_ID "MinGW")
-        endif()
-        if("${CMAKE_COMPILER_OUTPUT}" MATCHES "THIS_IS_CYGWIN")
-          set(CMAKE_Fortran_PLATFORM_ID "Cygwin")
-        endif()
-      endif()
-    endif()
-  endif()
-
-  # Set old compiler and platform id variables.
-  if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
-    set(CMAKE_COMPILER_IS_GNUG77 1)
-  endif()
-  if(CMAKE_Fortran_PLATFORM_ID MATCHES "MinGW")
-    set(CMAKE_COMPILER_IS_MINGW 1)
-  elseif(CMAKE_Fortran_PLATFORM_ID MATCHES "Cygwin")
-    set(CMAKE_COMPILER_IS_CYGWIN 1)
-  endif()
-endif()
-
-if (NOT _CMAKE_TOOLCHAIN_LOCATION)
-  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_Fortran_COMPILER}" PATH)
-endif ()
-
-# if we have a fortran cross compiler, they have usually some prefix, like
-# e.g. powerpc-linux-gfortran, arm-elf-gfortran or i586-mingw32msvc-gfortran , optionally
-# with a 3-component version number at the end (e.g. arm-eabi-gcc-4.5.2).
-# The other tools of the toolchain usually have the same prefix
-# NAME_WE cannot be used since then this test will fail for names like
-# "arm-unknown-nto-qnx6.3.0-gcc.exe", where BASENAME would be
-# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
-if (CMAKE_CROSSCOMPILING  AND NOT _CMAKE_TOOLCHAIN_PREFIX)
-
-  if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
-    get_filename_component(COMPILER_BASENAME "${CMAKE_Fortran_COMPILER}" NAME)
-    if (COMPILER_BASENAME MATCHES "^(.+-)g?fortran(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
-      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-    endif ()
-
-    # if "llvm-" is part of the prefix, remove it, since llvm doesn't have its own binutils
-    # but uses the regular ar, objcopy, etc. (instead of llvm-objcopy etc.)
-    if ("${_CMAKE_TOOLCHAIN_PREFIX}" MATCHES "(.+-)?llvm-$")
-      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
-    endif ()
-  endif()
-
-endif ()
-
-include(CMakeFindBinUtils)
-
-if(MSVC_Fortran_ARCHITECTURE_ID)
-  set(SET_MSVC_Fortran_ARCHITECTURE_ID
-    "set(MSVC_Fortran_ARCHITECTURE_ID ${MSVC_Fortran_ARCHITECTURE_ID})")
-endif()
-# configure variables set in this file for fast reload later on
-configure_file(${CMAKE_ROOT}/Modules/CMakeFortranCompiler.cmake.in
-  ${CMAKE_PLATFORM_INFO_DIR}/CMakeFortranCompiler.cmake
-  @ONLY
-  )
-set(CMAKE_Fortran_COMPILER_ENV_VAR "FC")
diff --git a/share/cmake-3.2/Modules/CMakeDetermineSystem.cmake b/share/cmake-3.2/Modules/CMakeDetermineSystem.cmake
deleted file mode 100644
index fe292ea..0000000
--- a/share/cmake-3.2/Modules/CMakeDetermineSystem.cmake
+++ /dev/null
@@ -1,191 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is used by the Makefile generator to determin the following variables:
-# CMAKE_SYSTEM_NAME - on unix this is uname -s, for windows it is Windows
-# CMAKE_SYSTEM_VERSION - on unix this is uname -r, for windows it is empty
-# CMAKE_SYSTEM - ${CMAKE_SYSTEM}-${CMAKE_SYSTEM_VERSION}, for windows: ${CMAKE_SYSTEM}
-#
-#  Expected uname -s output:
-#
-# AIX                           AIX
-# BSD/OS                        BSD/OS
-# FreeBSD                       FreeBSD
-# HP-UX                         HP-UX
-# IRIX                          IRIX
-# Linux                         Linux
-# GNU/kFreeBSD                  GNU/kFreeBSD
-# NetBSD                        NetBSD
-# OpenBSD                       OpenBSD
-# OFS/1 (Digital Unix)          OSF1
-# SCO OpenServer 5              SCO_SV
-# SCO UnixWare 7                UnixWare
-# SCO UnixWare (pre release 7)  UNIX_SV
-# SCO XENIX                     Xenix
-# Solaris                       SunOS
-# SunOS                         SunOS
-# Tru64                         Tru64
-# Ultrix                        ULTRIX
-# cygwin                        CYGWIN_NT-5.1
-# MacOSX                        Darwin
-
-
-# find out on which system cmake runs
-if(CMAKE_HOST_UNIX)
-  find_program(CMAKE_UNAME uname /bin /usr/bin /usr/local/bin )
-  if(CMAKE_UNAME)
-    exec_program(uname ARGS -s OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_NAME)
-    exec_program(uname ARGS -r OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_VERSION)
-    if(CMAKE_HOST_SYSTEM_NAME MATCHES "Linux|CYGWIN.*|Darwin|^GNU$")
-      exec_program(uname ARGS -m OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
-        RETURN_VALUE val)
-      if(CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin" AND
-         CMAKE_HOST_SYSTEM_PROCESSOR STREQUAL "Power Macintosh")
-        # OS X ppc 'uname -m' may report 'Power Macintosh' instead of 'powerpc'
-        set(CMAKE_HOST_SYSTEM_PROCESSOR "powerpc")
-      endif()
-    elseif(CMAKE_HOST_SYSTEM_NAME MATCHES "OpenBSD")
-      exec_program(arch ARGS -s OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
-        RETURN_VALUE val)
-    else()
-      exec_program(uname ARGS -p OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
-        RETURN_VALUE val)
-      if("${val}" GREATER 0)
-        exec_program(uname ARGS -m OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
-          RETURN_VALUE val)
-      endif()
-    endif()
-    # check the return of the last uname -m or -p
-    if("${val}" GREATER 0)
-        set(CMAKE_HOST_SYSTEM_PROCESSOR "unknown")
-    endif()
-    set(CMAKE_UNAME ${CMAKE_UNAME} CACHE INTERNAL "uname command")
-    # processor may have double quote in the name, and that needs to be removed
-    string(REPLACE "\"" "" CMAKE_HOST_SYSTEM_PROCESSOR "${CMAKE_HOST_SYSTEM_PROCESSOR}")
-    string(REPLACE "/" "_" CMAKE_HOST_SYSTEM_PROCESSOR "${CMAKE_HOST_SYSTEM_PROCESSOR}")
-  endif()
-else()
-  if(CMAKE_HOST_WIN32)
-    set (CMAKE_HOST_SYSTEM_NAME "Windows")
-    if (DEFINED ENV{PROCESSOR_ARCHITEW6432})
-      set (CMAKE_HOST_SYSTEM_PROCESSOR "$ENV{PROCESSOR_ARCHITEW6432}")
-    else()
-      set (CMAKE_HOST_SYSTEM_PROCESSOR "$ENV{PROCESSOR_ARCHITECTURE}")
-    endif()
-  endif()
-endif()
-
-# if a toolchain file is used, the user wants to cross compile.
-# in this case read the toolchain file and keep the CMAKE_HOST_SYSTEM_*
-# variables around so they can be used in CMakeLists.txt.
-# In all other cases, the host and target platform are the same.
-if(CMAKE_TOOLCHAIN_FILE)
-  # at first try to load it as path relative to the directory from which cmake has been run
-  include("${CMAKE_BINARY_DIR}/${CMAKE_TOOLCHAIN_FILE}" OPTIONAL RESULT_VARIABLE _INCLUDED_TOOLCHAIN_FILE)
-  if(NOT _INCLUDED_TOOLCHAIN_FILE)
-     # if the file isn't found there, check the default locations
-     include("${CMAKE_TOOLCHAIN_FILE}" OPTIONAL RESULT_VARIABLE _INCLUDED_TOOLCHAIN_FILE)
-  endif()
-
-  if(_INCLUDED_TOOLCHAIN_FILE)
-    set(CMAKE_TOOLCHAIN_FILE "${_INCLUDED_TOOLCHAIN_FILE}" CACHE FILEPATH "The CMake toolchain file" FORCE)
-  else()
-    message(FATAL_ERROR "Could not find toolchain file: ${CMAKE_TOOLCHAIN_FILE}")
-    set(CMAKE_TOOLCHAIN_FILE "NOTFOUND" CACHE FILEPATH "The CMake toolchain file" FORCE)
-  endif()
-endif()
-
-
-# if CMAKE_SYSTEM_NAME is here already set, either it comes from a toolchain file
-# or it was set via -DCMAKE_SYSTEM_NAME=...
-# if that's the case, assume we are crosscompiling
-if(CMAKE_SYSTEM_NAME)
-  if(NOT DEFINED CMAKE_CROSSCOMPILING)
-    set(CMAKE_CROSSCOMPILING TRUE)
-  endif()
-  set(PRESET_CMAKE_SYSTEM_NAME TRUE)
-elseif(CMAKE_VS_WINCE_VERSION)
-  set(CMAKE_SYSTEM_NAME      "WindowsCE")
-  set(CMAKE_SYSTEM_VERSION   "${CMAKE_VS_WINCE_VERSION}")
-  set(CMAKE_SYSTEM_PROCESSOR "${MSVC_C_ARCHITECTURE_ID}")
-  set(CMAKE_CROSSCOMPILING TRUE)
-  set(PRESET_CMAKE_SYSTEM_NAME TRUE)
-else()
-  set(CMAKE_SYSTEM_NAME      "${CMAKE_HOST_SYSTEM_NAME}")
-  set(CMAKE_SYSTEM_VERSION   "${CMAKE_HOST_SYSTEM_VERSION}")
-  set(CMAKE_SYSTEM_PROCESSOR "${CMAKE_HOST_SYSTEM_PROCESSOR}")
-  set(CMAKE_CROSSCOMPILING FALSE)
-  set(PRESET_CMAKE_SYSTEM_NAME FALSE)
-endif()
-
-
-macro(ADJUST_CMAKE_SYSTEM_VARIABLES _PREFIX)
-  if(NOT ${_PREFIX}_NAME)
-    set(${_PREFIX}_NAME "UnknownOS")
-  endif()
-
-  # fix for BSD/OS , remove the /
-  if(${_PREFIX}_NAME MATCHES BSD.OS)
-    set(${_PREFIX}_NAME BSDOS)
-  endif()
-
-  # fix for GNU/kFreeBSD, remove the GNU/
-  if(${_PREFIX}_NAME MATCHES kFreeBSD)
-    set(${_PREFIX}_NAME kFreeBSD)
-  endif()
-
-  # fix for CYGWIN which has windows version in it
-  if(${_PREFIX}_NAME MATCHES CYGWIN)
-    set(${_PREFIX}_NAME CYGWIN)
-  endif()
-
-  # set CMAKE_SYSTEM to the CMAKE_SYSTEM_NAME
-  set(${_PREFIX}  ${${_PREFIX}_NAME})
-  # if there is a CMAKE_SYSTEM_VERSION then add a -${CMAKE_SYSTEM_VERSION}
-  if(${_PREFIX}_VERSION)
-    set(${_PREFIX} ${${_PREFIX}}-${${_PREFIX}_VERSION})
-  endif()
-
-endmacro()
-
-ADJUST_CMAKE_SYSTEM_VARIABLES(CMAKE_SYSTEM)
-ADJUST_CMAKE_SYSTEM_VARIABLES(CMAKE_HOST_SYSTEM)
-
-# this file is also executed from cpack, then we don't need to generate these files
-# in this case there is no CMAKE_BINARY_DIR
-if(CMAKE_BINARY_DIR)
-  # write entry to the log file
-  if(PRESET_CMAKE_SYSTEM_NAME)
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-                "The target system is: ${CMAKE_SYSTEM_NAME} - ${CMAKE_SYSTEM_VERSION} - ${CMAKE_SYSTEM_PROCESSOR}\n")
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-                "The host system is: ${CMAKE_HOST_SYSTEM_NAME} - ${CMAKE_HOST_SYSTEM_VERSION} - ${CMAKE_HOST_SYSTEM_PROCESSOR}\n")
-  else()
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-                "The system is: ${CMAKE_SYSTEM_NAME} - ${CMAKE_SYSTEM_VERSION} - ${CMAKE_SYSTEM_PROCESSOR}\n")
-  endif()
-
-  # if a toolchain file is used, it needs to be included in the configured file,
-  # so settings done there are also available if they don't go in the cache and in try_compile()
-  set(INCLUDE_CMAKE_TOOLCHAIN_FILE_IF_REQUIRED)
-  if(DEFINED CMAKE_TOOLCHAIN_FILE)
-    set(INCLUDE_CMAKE_TOOLCHAIN_FILE_IF_REQUIRED "include(\"${CMAKE_TOOLCHAIN_FILE}\")")
-  endif()
-
-  # configure variables set in this file for fast reload, the template file is defined at the top of this file
-  configure_file(${CMAKE_ROOT}/Modules/CMakeSystem.cmake.in
-                ${CMAKE_PLATFORM_INFO_DIR}/CMakeSystem.cmake
-                @ONLY)
-
-endif()
diff --git a/share/cmake-3.2/Modules/CMakeExpandImportedTargets.cmake b/share/cmake-3.2/Modules/CMakeExpandImportedTargets.cmake
deleted file mode 100644
index 8ac3364..0000000
--- a/share/cmake-3.2/Modules/CMakeExpandImportedTargets.cmake
+++ /dev/null
@@ -1,146 +0,0 @@
-#.rst:
-# CMakeExpandImportedTargets
-# --------------------------
-#
-# ::
-#
-#  CMAKE_EXPAND_IMPORTED_TARGETS(<var> LIBRARIES lib1 lib2...libN
-#                                [CONFIGURATION <config>])
-#
-# CMAKE_EXPAND_IMPORTED_TARGETS() takes a list of libraries and replaces
-# all imported targets contained in this list with their actual file
-# paths of the referenced libraries on disk, including the libraries
-# from their link interfaces.  If a CONFIGURATION is given, it uses the
-# respective configuration of the imported targets if it exists.  If no
-# CONFIGURATION is given, it uses the first configuration from
-# ${CMAKE_CONFIGURATION_TYPES} if set, otherwise ${CMAKE_BUILD_TYPE}.
-# This macro is used by all Check*.cmake files which use try_compile()
-# or try_run() and support CMAKE_REQUIRED_LIBRARIES , so that these
-# checks support imported targets in CMAKE_REQUIRED_LIBRARIES:
-#
-# ::
-#
-#     cmake_expand_imported_targets(expandedLibs
-#       LIBRARIES ${CMAKE_REQUIRED_LIBRARIES}
-#       CONFIGURATION "${CMAKE_TRY_COMPILE_CONFIGURATION}" )
-
-
-#=============================================================================
-# Copyright 2012 Kitware, Inc.
-# Copyright 2009-2012 Alexander Neundorf <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
-
-function(CMAKE_EXPAND_IMPORTED_TARGETS _RESULT )
-
-   set(options )
-   set(oneValueArgs CONFIGURATION )
-   set(multiValueArgs LIBRARIES )
-
-   cmake_parse_arguments(CEIT "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
-
-   if(CEIT_UNPARSED_ARGUMENTS)
-      message(FATAL_ERROR "Unknown keywords given to CMAKE_EXPAND_IMPORTED_TARGETS(): \"${CEIT_UNPARSED_ARGUMENTS}\"")
-   endif()
-
-   if(NOT CEIT_CONFIGURATION)
-      if(CMAKE_CONFIGURATION_TYPES)
-         list(GET CMAKE_CONFIGURATION_TYPES 0 CEIT_CONFIGURATION)
-      else()
-         set(CEIT_CONFIGURATION ${CMAKE_BUILD_TYPE})
-      endif()
-   endif()
-
-   # handle imported library targets
-
-   set(_CCSR_REQ_LIBS ${CEIT_LIBRARIES})
-
-   set(_CHECK_FOR_IMPORTED_TARGETS TRUE)
-   set(_CCSR_LOOP_COUNTER 0)
-   while(_CHECK_FOR_IMPORTED_TARGETS)
-      math(EXPR _CCSR_LOOP_COUNTER "${_CCSR_LOOP_COUNTER} + 1 ")
-      set(_CCSR_NEW_REQ_LIBS )
-      set(_CHECK_FOR_IMPORTED_TARGETS FALSE)
-      foreach(_CURRENT_LIB ${_CCSR_REQ_LIBS})
-         if(TARGET "${_CURRENT_LIB}")
-           get_target_property(_importedConfigs "${_CURRENT_LIB}" IMPORTED_CONFIGURATIONS)
-         else()
-           set(_importedConfigs "")
-         endif()
-         if (_importedConfigs)
-#            message(STATUS "Detected imported target ${_CURRENT_LIB}")
-            # Ok, so this is an imported target.
-            # First we get the imported configurations.
-            # Then we get the location of the actual library on disk of the first configuration.
-            # then we'll get its link interface libraries property,
-            # iterate through it and replace all imported targets we find there
-            # with there actual location.
-
-            # guard against infinite loop: abort after 100 iterations ( 100 is arbitrary chosen)
-            if ("${_CCSR_LOOP_COUNTER}" LESS 100)
-               set(_CHECK_FOR_IMPORTED_TARGETS TRUE)
-#                else ()
-#                   message(STATUS "********* aborting loop, counter : ${_CCSR_LOOP_COUNTER}")
-            endif ()
-
-            # if one of the imported configurations equals ${CMAKE_TRY_COMPILE_CONFIGURATION},
-            # use it, otherwise simply use the first one:
-            list(FIND _importedConfigs "${CEIT_CONFIGURATION}" _configIndexToUse)
-            if("${_configIndexToUse}" EQUAL -1)
-              set(_configIndexToUse 0)
-            endif()
-            list(GET _importedConfigs ${_configIndexToUse} _importedConfigToUse)
-
-            get_target_property(_importedLocation "${_CURRENT_LIB}" IMPORTED_LOCATION_${_importedConfigToUse})
-            get_target_property(_linkInterfaceLibs "${_CURRENT_LIB}" IMPORTED_LINK_INTERFACE_LIBRARIES_${_importedConfigToUse} )
-
-            list(APPEND _CCSR_NEW_REQ_LIBS  "${_importedLocation}")
-#            message(STATUS "Appending lib ${_CURRENT_LIB} as ${_importedLocation}")
-            if(_linkInterfaceLibs)
-               foreach(_currentLinkInterfaceLib ${_linkInterfaceLibs})
-#                  message(STATUS "Appending link interface lib ${_currentLinkInterfaceLib}")
-                  if(_currentLinkInterfaceLib)
-                     list(APPEND _CCSR_NEW_REQ_LIBS "${_currentLinkInterfaceLib}" )
-                  endif()
-               endforeach()
-            endif()
-         else()
-            # "Normal" libraries are just used as they are.
-            list(APPEND _CCSR_NEW_REQ_LIBS "${_CURRENT_LIB}" )
-#            message(STATUS "Appending lib directly: ${_CURRENT_LIB}")
-         endif()
-      endforeach()
-
-      set(_CCSR_REQ_LIBS ${_CCSR_NEW_REQ_LIBS} )
-   endwhile()
-
-   # Finally we iterate once more over all libraries. This loop only removes
-   # all remaining imported target names (there shouldn't be any left anyway).
-   set(_CCSR_NEW_REQ_LIBS )
-   foreach(_CURRENT_LIB ${_CCSR_REQ_LIBS})
-      if(TARGET "${_CURRENT_LIB}")
-        get_target_property(_importedConfigs "${_CURRENT_LIB}" IMPORTED_CONFIGURATIONS)
-      else()
-        set(_importedConfigs "")
-      endif()
-      if (NOT _importedConfigs)
-         list(APPEND _CCSR_NEW_REQ_LIBS "${_CURRENT_LIB}" )
-#         message(STATUS "final: appending ${_CURRENT_LIB}")
-      else ()
-#             message(STATUS "final: skipping ${_CURRENT_LIB}")
-      endif ()
-   endforeach()
-#   message(STATUS "setting -${_RESULT}- to -${_CCSR_NEW_REQ_LIBS}-")
-   set(${_RESULT} "${_CCSR_NEW_REQ_LIBS}" PARENT_SCOPE)
-
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake b/share/cmake-3.2/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake
deleted file mode 100644
index 064e650..0000000
--- a/share/cmake-3.2/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake
+++ /dev/null
@@ -1,119 +0,0 @@
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This file is included by CMakeFindEclipseCDT4.cmake and CMakeFindCodeBlocks.cmake
-
-# The Eclipse and the CodeBlocks generators need to know the standard include path
-# so that they can find the headers at runtime and parsing etc. works better
-# This is done here by actually running gcc with the options so it prints its
-# system include directories, which are parsed then and stored in the cache.
-macro(_DETERMINE_GCC_SYSTEM_INCLUDE_DIRS _lang _resultIncludeDirs _resultDefines)
-  set(${_resultIncludeDirs})
-  set(_gccOutput)
-  file(WRITE "${CMAKE_BINARY_DIR}/CMakeFiles/dummy" "\n" )
-
-  if (${_lang} STREQUAL "c++")
-    set(_compilerExecutable "${CMAKE_CXX_COMPILER}")
-    set(_arg1 "${CMAKE_CXX_COMPILER_ARG1}")
-
-    if (CMAKE_CXX_FLAGS MATCHES "(-stdlib=[^ ]+)")
-      set(_stdlib "${CMAKE_MATCH_1}")
-    endif ()
-    if (CMAKE_CXX_FLAGS MATCHES "(-std=[^ ]+)")
-      set(_stdver "${CMAKE_MATCH_1}")
-    endif ()
-  else ()
-    set(_compilerExecutable "${CMAKE_C_COMPILER}")
-    set(_arg1 "${CMAKE_C_COMPILER_ARG1}")
-  endif ()
-  execute_process(COMMAND ${_compilerExecutable} ${_arg1} ${_stdver} ${_stdlib} -v -E -x ${_lang} -dD dummy
-                  WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/CMakeFiles
-                  ERROR_VARIABLE _gccOutput
-                  OUTPUT_VARIABLE _gccStdout )
-  file(REMOVE "${CMAKE_BINARY_DIR}/CMakeFiles/dummy")
-
-  # First find the system include dirs:
-  if( "${_gccOutput}" MATCHES "> search starts here[^\n]+\n *(.+ *\n) *End of (search) list" )
-
-    # split the output into lines and then remove leading and trailing spaces from each of them:
-    string(REGEX MATCHALL "[^\n]+\n" _includeLines "${CMAKE_MATCH_1}")
-    foreach(nextLine ${_includeLines})
-      # on OSX, gcc says things like this:  "/System/Library/Frameworks (framework directory)", strip the last part
-      string(REGEX REPLACE "\\(framework directory\\)" "" nextLineNoFramework "${nextLine}")
-      # strip spaces at the beginning and the end
-      string(STRIP "${nextLineNoFramework}" _includePath)
-      list(APPEND ${_resultIncludeDirs} "${_includePath}")
-    endforeach()
-
-  endif()
-
-
-  # now find the builtin macros:
-  string(REGEX MATCHALL "#define[^\n]+\n" _defineLines "${_gccStdout}")
-# A few example lines which the regexp below has to match properly:
-#  #define   MAX(a,b) ((a) > (b) ? (a) : (b))
-#  #define __fastcall __attribute__((__fastcall__))
-#  #define   FOO (23)
-#  #define __UINTMAX_TYPE__ long long unsigned int
-#  #define __UINTMAX_TYPE__ long long unsigned int
-#  #define __i386__  1
-
-  foreach(nextLine ${_defineLines})
-    string(REGEX MATCH "^#define +([A-Za-z_][A-Za-z0-9_]*)(\\([^\\)]+\\))? +(.+) *$" _dummy "${nextLine}")
-    set(_name "${CMAKE_MATCH_1}${CMAKE_MATCH_2}")
-    string(STRIP "${CMAKE_MATCH_3}" _value)
-    #message(STATUS "m1: -${CMAKE_MATCH_1}- m2: -${CMAKE_MATCH_2}- m3: -${CMAKE_MATCH_3}-")
-
-    list(APPEND ${_resultDefines} "${_name}")
-    if(_value)
-      list(APPEND ${_resultDefines} "${_value}")
-    else()
-      list(APPEND ${_resultDefines} " ")
-    endif()
-  endforeach()
-
-endmacro()
-
-# Save the current LC_ALL, LC_MESSAGES, and LANG environment variables and set them
-# to "C" that way GCC's "search starts here" text is in English and we can grok it.
-set(_orig_lc_all      $ENV{LC_ALL})
-set(_orig_lc_messages $ENV{LC_MESSAGES})
-set(_orig_lang        $ENV{LANG})
-
-set(ENV{LC_ALL}      C)
-set(ENV{LC_MESSAGES} C)
-set(ENV{LANG}        C)
-
-# Now check for C, works for gcc and Intel compiler at least
-if (NOT CMAKE_EXTRA_GENERATOR_C_SYSTEM_INCLUDE_DIRS)
-  if (CMAKE_C_COMPILER_ID MATCHES GNU  OR  CMAKE_C_COMPILER_ID MATCHES Intel  OR  CMAKE_C_COMPILER_ID MATCHES Clang)
-    _DETERMINE_GCC_SYSTEM_INCLUDE_DIRS(c _dirs _defines)
-    set(CMAKE_EXTRA_GENERATOR_C_SYSTEM_INCLUDE_DIRS "${_dirs}" CACHE INTERNAL "C compiler system include directories")
-    set(CMAKE_EXTRA_GENERATOR_C_SYSTEM_DEFINED_MACROS "${_defines}" CACHE INTERNAL "C compiler system defined macros")
-  endif ()
-endif ()
-
-# And now the same for C++
-if (NOT CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_INCLUDE_DIRS)
-  if ("${CMAKE_CXX_COMPILER_ID}" MATCHES GNU  OR  "${CMAKE_CXX_COMPILER_ID}" MATCHES Intel  OR  "${CMAKE_CXX_COMPILER_ID}" MATCHES Clang)
-    _DETERMINE_GCC_SYSTEM_INCLUDE_DIRS(c++ _dirs _defines)
-    set(CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_INCLUDE_DIRS "${_dirs}" CACHE INTERNAL "CXX compiler system include directories")
-    set(CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_DEFINED_MACROS "${_defines}" CACHE INTERNAL "CXX compiler system defined macros")
-  endif ()
-endif ()
-
-# Restore original LC_ALL, LC_MESSAGES, and LANG
-set(ENV{LC_ALL}      ${_orig_lc_all})
-set(ENV{LC_MESSAGES} ${_orig_lc_messages})
-set(ENV{LANG}        ${_orig_lang})
diff --git a/share/cmake-3.2/Modules/CMakeFindCodeBlocks.cmake b/share/cmake-3.2/Modules/CMakeFindCodeBlocks.cmake
deleted file mode 100644
index f8d8d59..0000000
--- a/share/cmake-3.2/Modules/CMakeFindCodeBlocks.cmake
+++ /dev/null
@@ -1,25 +0,0 @@
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This file is included in CMakeSystemSpecificInformation.cmake if
-# the CodeBlocks extra generator has been selected.
-
-find_program(CMAKE_CODEBLOCKS_EXECUTABLE NAMES codeblocks DOC "The CodeBlocks executable")
-
-if(CMAKE_CODEBLOCKS_EXECUTABLE)
-   set(CMAKE_OPEN_PROJECT_COMMAND "${CMAKE_CODEBLOCKS_EXECUTABLE} <PROJECT_FILE>" )
-endif()
-
-# Determine builtin macros and include dirs:
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake)
diff --git a/share/cmake-3.2/Modules/CMakeFindEclipseCDT4.cmake b/share/cmake-3.2/Modules/CMakeFindEclipseCDT4.cmake
deleted file mode 100644
index 85c1fdf..0000000
--- a/share/cmake-3.2/Modules/CMakeFindEclipseCDT4.cmake
+++ /dev/null
@@ -1,95 +0,0 @@
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This file is included in CMakeSystemSpecificInformation.cmake if
-# the Eclipse CDT4 extra generator has been selected.
-
-find_program(CMAKE_ECLIPSE_EXECUTABLE NAMES eclipse DOC "The Eclipse executable")
-
-function(_FIND_ECLIPSE_VERSION)
-  # This code is in a function so the variables used here have only local scope
-
-  # Set up a map with the names of the Eclipse releases:
-  set(_ECLIPSE_VERSION_NAME_    "Unknown" )
-  set(_ECLIPSE_VERSION_NAME_3.2 "Callisto" )
-  set(_ECLIPSE_VERSION_NAME_3.3 "Europa" )
-  set(_ECLIPSE_VERSION_NAME_3.4 "Ganymede" )
-  set(_ECLIPSE_VERSION_NAME_3.5 "Galileo" )
-  set(_ECLIPSE_VERSION_NAME_3.6 "Helios" )
-  set(_ECLIPSE_VERSION_NAME_3.7 "Indigo" )
-  set(_ECLIPSE_VERSION_NAME_4.2 "Juno" )
-  set(_ECLIPSE_VERSION_NAME_4.3 "Kepler" )
-
-  if(NOT DEFINED CMAKE_ECLIPSE_VERSION)
-    if(CMAKE_ECLIPSE_EXECUTABLE)
-      # use REALPATH to resolve symlinks (http://public.kitware.com/Bug/view.php?id=13036)
-      get_filename_component(_REALPATH_CMAKE_ECLIPSE_EXECUTABLE "${CMAKE_ECLIPSE_EXECUTABLE}" REALPATH)
-      get_filename_component(_ECLIPSE_DIR "${_REALPATH_CMAKE_ECLIPSE_EXECUTABLE}" PATH)
-      file(GLOB _ECLIPSE_FEATURE_DIR "${_ECLIPSE_DIR}/features/org.eclipse.platform*")
-      if(APPLE AND NOT _ECLIPSE_FEATURE_DIR)
-        file(GLOB _ECLIPSE_FEATURE_DIR "${_ECLIPSE_DIR}/../../../features/org.eclipse.platform*")
-      endif()
-      if("${_ECLIPSE_FEATURE_DIR}" MATCHES ".+org.eclipse.platform_([0-9]+\\.[0-9]+).+")
-        set(_ECLIPSE_VERSION ${CMAKE_MATCH_1})
-      endif()
-    endif()
-
-    if(_ECLIPSE_VERSION)
-      message(STATUS "Found Eclipse version ${_ECLIPSE_VERSION} (${_ECLIPSE_VERSION_NAME_${_ECLIPSE_VERSION}})")
-    else()
-      set(_ECLIPSE_VERSION "3.6" )
-      message(STATUS "Could not determine Eclipse version, assuming at least ${_ECLIPSE_VERSION} (${_ECLIPSE_VERSION_NAME_${_ECLIPSE_VERSION}}). Adjust CMAKE_ECLIPSE_VERSION if this is wrong.")
-    endif()
-
-    set(CMAKE_ECLIPSE_VERSION "${_ECLIPSE_VERSION} (${_ECLIPSE_VERSION_NAME_${_ECLIPSE_VERSION}})" CACHE STRING "The version of Eclipse. If Eclipse has not been found, 3.6 (Helios) is assumed.")
-  else()
-    message(STATUS "Eclipse version is set to ${CMAKE_ECLIPSE_VERSION}. Adjust CMAKE_ECLIPSE_VERSION if this is wrong.")
-  endif()
-
-  set_property(CACHE CMAKE_ECLIPSE_VERSION PROPERTY STRINGS "3.2 (${_ECLIPSE_VERSION_NAME_3.2})"
-                                                            "3.3 (${_ECLIPSE_VERSION_NAME_3.3})"
-                                                            "3.4 (${_ECLIPSE_VERSION_NAME_3.4})"
-                                                            "3.5 (${_ECLIPSE_VERSION_NAME_3.5})"
-                                                            "3.6 (${_ECLIPSE_VERSION_NAME_3.6})"
-                                                            "3.7 (${_ECLIPSE_VERSION_NAME_3.7})"
-                                                            "4.2 (${_ECLIPSE_VERSION_NAME_4.2})"
-                                                            "4.3 (${_ECLIPSE_VERSION_NAME_4.3})"
-              )
-endfunction()
-
-_find_eclipse_version()
-
-# Try to find out how many CPUs we have and set the -j argument for make accordingly
-set(_CMAKE_ECLIPSE_INITIAL_MAKE_ARGS "")
-
-include(ProcessorCount)
-processorcount(_CMAKE_ECLIPSE_PROCESSOR_COUNT)
-
-# Only set -j if we are under UNIX and if the make-tool used actually has "make" in the name
-# (we may also get here in the future e.g. for ninja)
-if("${_CMAKE_ECLIPSE_PROCESSOR_COUNT}" GREATER 1  AND  CMAKE_HOST_UNIX  AND  "${CMAKE_MAKE_PROGRAM}" MATCHES make)
-  set(_CMAKE_ECLIPSE_INITIAL_MAKE_ARGS "-j${_CMAKE_ECLIPSE_PROCESSOR_COUNT}")
-endif()
-
-# This variable is used by the Eclipse generator and appended to the make invocation commands.
-set(CMAKE_ECLIPSE_MAKE_ARGUMENTS "${_CMAKE_ECLIPSE_INITIAL_MAKE_ARGS}" CACHE STRING "Additional command line arguments when Eclipse invokes make. Enter e.g. -j<some_number> to get parallel builds")
-
-set(CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES TRUE CACHE BOOL "If disabled, CMake will not generate linked resource to the subprojects and to the source files within targets")
-
-# This variable is used by the Eclipse generator in out-of-source builds only.
-set(CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT FALSE CACHE BOOL "If enabled, CMake will generate a source project for Eclipse in CMAKE_SOURCE_DIR")
-mark_as_advanced(CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT)
-
-# Determine builtin macros and include dirs:
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake)
diff --git a/share/cmake-3.2/Modules/CMakeForceCompiler.cmake b/share/cmake-3.2/Modules/CMakeForceCompiler.cmake
deleted file mode 100644
index 1d8b110..0000000
--- a/share/cmake-3.2/Modules/CMakeForceCompiler.cmake
+++ /dev/null
@@ -1,100 +0,0 @@
-#.rst:
-# CMakeForceCompiler
-# ------------------
-#
-#
-#
-# This module defines macros intended for use by cross-compiling
-# toolchain files when CMake is not able to automatically detect the
-# compiler identification.
-#
-# Macro CMAKE_FORCE_C_COMPILER has the following signature:
-#
-# ::
-#
-#    CMAKE_FORCE_C_COMPILER(<compiler> <compiler-id>)
-#
-# It sets CMAKE_C_COMPILER to the given compiler and the cmake internal
-# variable CMAKE_C_COMPILER_ID to the given compiler-id.  It also
-# bypasses the check for working compiler and basic compiler information
-# tests.
-#
-# Macro CMAKE_FORCE_CXX_COMPILER has the following signature:
-#
-# ::
-#
-#    CMAKE_FORCE_CXX_COMPILER(<compiler> <compiler-id>)
-#
-# It sets CMAKE_CXX_COMPILER to the given compiler and the cmake
-# internal variable CMAKE_CXX_COMPILER_ID to the given compiler-id.  It
-# also bypasses the check for working compiler and basic compiler
-# information tests.
-#
-# Macro CMAKE_FORCE_Fortran_COMPILER has the following signature:
-#
-# ::
-#
-#    CMAKE_FORCE_Fortran_COMPILER(<compiler> <compiler-id>)
-#
-# It sets CMAKE_Fortran_COMPILER to the given compiler and the cmake
-# internal variable CMAKE_Fortran_COMPILER_ID to the given compiler-id.
-# It also bypasses the check for working compiler and basic compiler
-# information tests.
-#
-# So a simple toolchain file could look like this:
-#
-# ::
-#
-#    include (CMakeForceCompiler)
-#    set(CMAKE_SYSTEM_NAME Generic)
-#    CMAKE_FORCE_C_COMPILER   (chc12 MetrowerksHicross)
-#    CMAKE_FORCE_CXX_COMPILER (chc12 MetrowerksHicross)
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-macro(CMAKE_FORCE_C_COMPILER compiler id)
-  set(CMAKE_C_COMPILER "${compiler}")
-  set(CMAKE_C_COMPILER_ID_RUN TRUE)
-  set(CMAKE_C_COMPILER_ID ${id})
-  set(CMAKE_C_COMPILER_FORCED TRUE)
-
-  # Set old compiler id variables.
-  if(CMAKE_C_COMPILER_ID MATCHES "GNU")
-    set(CMAKE_COMPILER_IS_GNUCC 1)
-  endif()
-endmacro()
-
-macro(CMAKE_FORCE_CXX_COMPILER compiler id)
-  set(CMAKE_CXX_COMPILER "${compiler}")
-  set(CMAKE_CXX_COMPILER_ID_RUN TRUE)
-  set(CMAKE_CXX_COMPILER_ID ${id})
-  set(CMAKE_CXX_COMPILER_FORCED TRUE)
-
-  # Set old compiler id variables.
-  if("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU")
-    set(CMAKE_COMPILER_IS_GNUCXX 1)
-  endif()
-endmacro()
-
-macro(CMAKE_FORCE_Fortran_COMPILER compiler id)
-  set(CMAKE_Fortran_COMPILER "${compiler}")
-  set(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
-  set(CMAKE_Fortran_COMPILER_ID ${id})
-  set(CMAKE_Fortran_COMPILER_FORCED TRUE)
-
-  # Set old compiler id variables.
-  if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
-    set(CMAKE_COMPILER_IS_GNUG77 1)
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CMakeFortranCompiler.cmake.in b/share/cmake-3.2/Modules/CMakeFortranCompiler.cmake.in
deleted file mode 100644
index e4c7618..0000000
--- a/share/cmake-3.2/Modules/CMakeFortranCompiler.cmake.in
+++ /dev/null
@@ -1,57 +0,0 @@
-set(CMAKE_Fortran_COMPILER "@CMAKE_Fortran_COMPILER@")
-set(CMAKE_Fortran_COMPILER_ARG1 "@CMAKE_Fortran_COMPILER_ARG1@")
-set(CMAKE_Fortran_COMPILER_ID "@CMAKE_Fortran_COMPILER_ID@")
-set(CMAKE_Fortran_PLATFORM_ID "@CMAKE_Fortran_PLATFORM_ID@")
-set(CMAKE_Fortran_SIMULATE_ID "@CMAKE_Fortran_SIMULATE_ID@")
-set(CMAKE_Fortran_SIMULATE_VERSION "@CMAKE_Fortran_SIMULATE_VERSION@")
-@SET_MSVC_Fortran_ARCHITECTURE_ID@
-set(CMAKE_AR "@CMAKE_AR@")
-set(CMAKE_RANLIB "@CMAKE_RANLIB@")
-set(CMAKE_COMPILER_IS_GNUG77 @CMAKE_COMPILER_IS_GNUG77@)
-set(CMAKE_Fortran_COMPILER_LOADED 1)
-set(CMAKE_Fortran_COMPILER_WORKS @CMAKE_Fortran_COMPILER_WORKS@)
-set(CMAKE_Fortran_ABI_COMPILED @CMAKE_Fortran_ABI_COMPILED@)
-set(CMAKE_COMPILER_IS_MINGW @CMAKE_COMPILER_IS_MINGW@)
-set(CMAKE_COMPILER_IS_CYGWIN @CMAKE_COMPILER_IS_CYGWIN@)
-if(CMAKE_COMPILER_IS_CYGWIN)
-  set(CYGWIN 1)
-  set(UNIX 1)
-endif()
-
-set(CMAKE_Fortran_COMPILER_ENV_VAR "FC")
-
-set(CMAKE_Fortran_COMPILER_SUPPORTS_F90 @CMAKE_Fortran_COMPILER_SUPPORTS_F90@)
-
-if(CMAKE_COMPILER_IS_MINGW)
-  set(MINGW 1)
-endif()
-set(CMAKE_Fortran_COMPILER_ID_RUN 1)
-set(CMAKE_Fortran_SOURCE_FILE_EXTENSIONS f;F;f77;F77;f90;F90;for;For;FOR;f95;F95)
-set(CMAKE_Fortran_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
-set(CMAKE_Fortran_LINKER_PREFERENCE 20)
-if(UNIX)
-  set(CMAKE_Fortran_OUTPUT_EXTENSION .o)
-else()
-  set(CMAKE_Fortran_OUTPUT_EXTENSION .obj)
-endif()
-
-# Save compiler ABI information.
-set(CMAKE_Fortran_SIZEOF_DATA_PTR "@CMAKE_Fortran_SIZEOF_DATA_PTR@")
-set(CMAKE_Fortran_COMPILER_ABI "@CMAKE_Fortran_COMPILER_ABI@")
-set(CMAKE_Fortran_LIBRARY_ARCHITECTURE "@CMAKE_Fortran_LIBRARY_ARCHITECTURE@")
-
-if(CMAKE_Fortran_SIZEOF_DATA_PTR AND NOT CMAKE_SIZEOF_VOID_P)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_Fortran_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_Fortran_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_Fortran_COMPILER_ABI}")
-endif()
-
-if(CMAKE_Fortran_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "@CMAKE_Fortran_LIBRARY_ARCHITECTURE@")
-endif()
-
-set(CMAKE_Fortran_IMPLICIT_LINK_LIBRARIES "@CMAKE_Fortran_IMPLICIT_LINK_LIBRARIES@")
-set(CMAKE_Fortran_IMPLICIT_LINK_DIRECTORIES "@CMAKE_Fortran_IMPLICIT_LINK_DIRECTORIES@")
-set(CMAKE_Fortran_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "@CMAKE_Fortran_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES@")
diff --git a/share/cmake-3.2/Modules/CMakeFortranCompilerId.F.in b/share/cmake-3.2/Modules/CMakeFortranCompilerId.F.in
deleted file mode 100644
index 5349505..0000000
--- a/share/cmake-3.2/Modules/CMakeFortranCompilerId.F.in
+++ /dev/null
@@ -1,137 +0,0 @@
-      PROGRAM CMakeFortranCompilerId
-#if 0
-! Identify the compiler
-#endif
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-        PRINT *, 'INFO:compiler[Intel]'
-# if defined(_MSC_VER)
-        PRINT *, 'INFO:simulate[MSVC]'
-#  if _MSC_VER >= 1800
-        PRINT *, 'INFO:simulate_version[018.00]'
-#  elif _MSC_VER >= 1700
-        PRINT *, 'INFO:simulate_version[017.00]'
-#  elif _MSC_VER >= 1600
-        PRINT *, 'INFO:simulate_version[016.00]'
-#  elif _MSC_VER >= 1500
-        PRINT *, 'INFO:simulate_version[015.00]'
-#  elif _MSC_VER >= 1400
-        PRINT *, 'INFO:simulate_version[014.00]'
-#  elif _MSC_VER >= 1310
-        PRINT *, 'INFO:simulate_version[013.01]'
-#  else
-        PRINT *, 'INFO:simulate_version[013.00]'
-#  endif
-# endif
-#elif defined(__SUNPRO_F90) || defined(__SUNPRO_F95)
-        PRINT *, 'INFO:compiler[SunPro]'
-#elif defined(_CRAYFTN)
-        PRINT *, 'INFO:compiler[Cray]'
-#elif defined(__G95__)
-        PRINT *, 'INFO:compiler[G95]'
-#elif defined(__PATHSCALE__)
-        PRINT *, 'INFO:compiler[PathScale]'
-#elif defined(__ABSOFT__)
-        PRINT *, 'INFO:compiler[Absoft]'
-#elif defined(__GNUC__)
-        PRINT *, 'INFO:compiler[GNU]'
-#elif defined(__IBMC__)
-# if defined(__COMPILER_VER__)
-        PRINT *, 'INFO:compiler[zOS]'
-# elif __IBMC__ >= 800
-        PRINT *, 'INFO:compiler[XL]'
-# else
-        PRINT *, 'INFO:compiler[VisualAge]'
-# endif
-#elif defined(__PGI)
-        PRINT *, 'INFO:compiler[PGI]'
-#elif defined(_SGI_COMPILER_VERSION) || defined(_COMPILER_VERSION)
-        PRINT *, 'INFO:compiler[MIPSpro]'
-#       if 0
-!       This compiler is either not known or is too old to define an
-!       identification macro.  Try to identify the platform and guess that
-!       it is the native compiler.
-#       endif
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-        PRINT *, 'INFO:compiler[VisualAge]'
-#elif defined(__sgi) || defined(__sgi__) || defined(_SGI)
-        PRINT *, 'INFO:compiler[MIPSpro]'
-#elif defined(__hpux) || defined(__hpux__)
-        PRINT *, 'INFO:compiler[HP]'
-#elif 1
-#       if 0
-!       The above 'elif 1' instead of 'else' is to work around a bug in the
-!       SGI preprocessor which produces both the __sgi and else blocks.
-#       endif
-        PRINT *, 'INFO:compiler[]'
-#endif
-
-#if 0
-! Identify the platform
-#endif
-#if defined(__linux) || defined(__linux__) || defined(linux)
-        PRINT *, 'INFO:platform[Linux]'
-#elif defined(__CYGWIN__)
-        PRINT *, 'INFO:platform[Cygwin]'
-#elif defined(__MINGW32__)
-        PRINT *, 'INFO:platform[MinGW]'
-#elif defined(__APPLE__)
-        PRINT *, 'INFO:platform[Darwin]'
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-        PRINT *, 'INFO:platform[Windows]'
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-        PRINT *, 'INFO:platform[FreeBSD]'
-#elif defined(__NetBSD__) || defined(__NetBSD)
-        PRINT *, 'INFO:platform[NetBSD]'
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-        PRINT *, 'INFO:platform[OpenBSD]'
-#elif defined(__sun) || defined(sun)
-        PRINT *, 'INFO:platform[SunOS]'
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-        PRINT *, 'INFO:platform[AIX]'
-#elif defined(__sgi) || defined(__sgi__) || defined(_SGI)
-        PRINT *, 'INFO:platform[IRIX]'
-#elif defined(__hpux) || defined(__hpux__)
-        PRINT *, 'INFO:platform[HP-UX]'
-#elif defined(__HAIKU__)
-        PRINT *, 'INFO:platform[Haiku]'
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-        PRINT *, 'INFO:platform[BeOS]'
-#elif defined(__QNX__) || defined(__QNXNTO__)
-        PRINT *, 'INFO:platform[QNX]'
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-        PRINT *, 'INFO:platform[Tru64]'
-#elif defined(__riscos) || defined(__riscos__)
-        PRINT *, 'INFO:platform[RISCos]'
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-        PRINT *, 'INFO:platform[SINIX]'
-#elif defined(__UNIX_SV__)
-        PRINT *, 'INFO:platform[UNIX_SV]'
-#elif defined(__bsdos__)
-        PRINT *, 'INFO:platform[BSDOS]'
-#elif defined(_MPRAS) || defined(MPRAS)
-        PRINT *, 'INFO:platform[MP-RAS]'
-#elif defined(__osf) || defined(__osf__)
-        PRINT *, 'INFO:platform[OSF1]'
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-        PRINT *, 'INFO:platform[SCO_SV]'
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-        PRINT *, 'INFO:platform[ULTRIX]'
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-        PRINT *, 'INFO:platform[Xenix]'
-#elif 1
-#       if 0
-!       The above 'elif 1' instead of 'else' is to work around a bug in the
-!       SGI preprocessor which produces both the __sgi and else blocks.
-#       endif
-        PRINT *, 'INFO:platform[]'
-#endif
-#if defined(_WIN32) && (defined(__INTEL_COMPILER) || defined(__ICC))
-# if defined(_M_IA64)
-        PRINT *, 'INFO:arch[IA64]'
-# elif defined(_M_X64) || defined(_M_AMD64)
-        PRINT *, 'INFO:arch[x64]'
-# elif defined(_M_IX86)
-        PRINT *, 'INFO:arch[X86]'
-# endif
-#endif
-      END
diff --git a/share/cmake-3.2/Modules/CMakeFortranInformation.cmake b/share/cmake-3.2/Modules/CMakeFortranInformation.cmake
deleted file mode 100644
index d638207..0000000
--- a/share/cmake-3.2/Modules/CMakeFortranInformation.cmake
+++ /dev/null
@@ -1,245 +0,0 @@
-
-#=============================================================================
-# Copyright 2004-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This file sets the basic flags for the Fortran language in CMake.
-# It also loads the available platform file for the system-compiler
-# if it exists.
-
-set(_INCLUDED_FILE 0)
-
-# Load compiler-specific information.
-if(CMAKE_Fortran_COMPILER_ID)
-  include(Compiler/${CMAKE_Fortran_COMPILER_ID}-Fortran OPTIONAL)
-endif()
-
-set(CMAKE_BASE_NAME)
-get_filename_component(CMAKE_BASE_NAME "${CMAKE_Fortran_COMPILER}" NAME_WE)
-# since the gnu compiler has several names force g++
-if(CMAKE_COMPILER_IS_GNUG77)
-  set(CMAKE_BASE_NAME g77)
-endif()
-if(CMAKE_Fortran_COMPILER_ID)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_Fortran_COMPILER_ID}-Fortran OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
-endif()
-if (NOT _INCLUDED_FILE)
-  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL
-          RESULT_VARIABLE _INCLUDED_FILE)
-endif ()
-# We specify the compiler information in the system file for some
-# platforms, but this language may not have been enabled when the file
-# was first included.  Include it again to get the language info.
-# Remove this when all compiler info is removed from system files.
-if (NOT _INCLUDED_FILE)
-  include(Platform/${CMAKE_SYSTEM_NAME} OPTIONAL)
-endif ()
-
-if(CMAKE_Fortran_SIZEOF_DATA_PTR)
-  foreach(f ${CMAKE_Fortran_ABI_FILES})
-    include(${f})
-  endforeach()
-  unset(CMAKE_Fortran_ABI_FILES)
-endif()
-
-# This should be included before the _INIT variables are
-# used to initialize the cache.  Since the rule variables
-# have if blocks on them, users can still define them here.
-# But, it should still be after the platform file so changes can
-# be made to those values.
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
-endif()
-
-if(CMAKE_USER_MAKE_RULES_OVERRIDE_Fortran)
-  # Save the full path of the file so try_compile can use it.
-  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_Fortran} RESULT_VARIABLE _override)
-  set(CMAKE_USER_MAKE_RULES_OVERRIDE_Fortran "${_override}")
-endif()
-
-
-# Fortran needs cmake to do a requires step during its build process to
-# catch any modules
-set(CMAKE_NEEDS_REQUIRES_STEP_Fortran_FLAG 1)
-
-if(NOT CMAKE_Fortran_COMPILE_OPTIONS_PIC)
-  set(CMAKE_Fortran_COMPILE_OPTIONS_PIC ${CMAKE_C_COMPILE_OPTIONS_PIC})
-endif()
-
-if(NOT CMAKE_Fortran_COMPILE_OPTIONS_PIE)
-  set(CMAKE_Fortran_COMPILE_OPTIONS_PIE ${CMAKE_C_COMPILE_OPTIONS_PIE})
-endif()
-
-if(NOT CMAKE_Fortran_COMPILE_OPTIONS_DLL)
-  set(CMAKE_Fortran_COMPILE_OPTIONS_DLL ${CMAKE_C_COMPILE_OPTIONS_DLL})
-endif()
-
-# Create a set of shared library variable specific to Fortran
-# For 90% of the systems, these are the same flags as the C versions
-# so if these are not set just copy the flags from the c version
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS)
-  set(CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_Fortran_FLAGS)
-  set(CMAKE_SHARED_LIBRARY_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_C_FLAGS})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_Fortran_FLAGS)
-  set(CMAKE_SHARED_LIBRARY_LINK_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_LINK_C_FLAGS})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG)
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP)
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_RPATH_LINK_Fortran_FLAG)
-  set(CMAKE_SHARED_LIBRARY_RPATH_LINK_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_EXE_EXPORTS_Fortran_FLAG)
-  set(CMAKE_EXE_EXPORTS_Fortran_FLAG ${CMAKE_EXE_EXPORTS_C_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG)
-  set(CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_SONAME_C_FLAG})
-endif()
-
-# for most systems a module is the same as a shared library
-# so unless the variable CMAKE_MODULE_EXISTS is set just
-# copy the values from the LIBRARY variables
-if(NOT CMAKE_MODULE_EXISTS)
-  set(CMAKE_SHARED_MODULE_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_Fortran_FLAGS})
-  set(CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS})
-endif()
-
-# repeat for modules
-if(NOT DEFINED CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS)
-  set(CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS ${CMAKE_SHARED_MODULE_CREATE_C_FLAGS})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_MODULE_Fortran_FLAGS)
-  set(CMAKE_SHARED_MODULE_Fortran_FLAGS ${CMAKE_SHARED_MODULE_C_FLAGS})
-endif()
-
-if(NOT DEFINED CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG)
-  set(CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG_SEP)
-  set(CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP})
-endif()
-
-if(NOT DEFINED CMAKE_EXECUTABLE_RPATH_LINK_Fortran_FLAG)
-  set(CMAKE_EXECUTABLE_RPATH_LINK_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_Fortran_FLAG})
-endif()
-
-if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_Fortran_WITH_RUNTIME_PATH)
-  set(CMAKE_SHARED_LIBRARY_LINK_Fortran_WITH_RUNTIME_PATH ${CMAKE_SHARED_LIBRARY_LINK_C_WITH_RUNTIME_PATH})
-endif()
-
-if(NOT CMAKE_INCLUDE_FLAG_Fortran)
-  set(CMAKE_INCLUDE_FLAG_Fortran ${CMAKE_INCLUDE_FLAG_C})
-endif()
-
-if(NOT CMAKE_INCLUDE_FLAG_SEP_Fortran)
-  set(CMAKE_INCLUDE_FLAG_SEP_Fortran ${CMAKE_INCLUDE_FLAG_SEP_C})
-endif()
-
-set(CMAKE_VERBOSE_MAKEFILE FALSE CACHE BOOL "If this value is on, makefiles will be generated without the .SILENT directive, and all commands will be echoed to the console during the make.  This is useful for debugging only. With Visual Studio IDE projects all commands are done without /nologo.")
-
-set(CMAKE_Fortran_FLAGS_INIT "$ENV{FFLAGS} ${CMAKE_Fortran_FLAGS_INIT}")
-# avoid just having a space as the initial value for the cache
-if(CMAKE_Fortran_FLAGS_INIT STREQUAL " ")
-  set(CMAKE_Fortran_FLAGS_INIT)
-endif()
-set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS_INIT}" CACHE STRING
-     "Flags for Fortran compiler.")
-
-include(CMakeCommonLanguageInclude)
-
-# now define the following rule variables
-# CMAKE_Fortran_CREATE_SHARED_LIBRARY
-# CMAKE_Fortran_CREATE_SHARED_MODULE
-# CMAKE_Fortran_COMPILE_OBJECT
-# CMAKE_Fortran_LINK_EXECUTABLE
-
-# create a Fortran shared library
-if(NOT CMAKE_Fortran_CREATE_SHARED_LIBRARY)
-  set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
-      "<CMAKE_Fortran_COMPILER> <CMAKE_SHARED_LIBRARY_Fortran_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS> <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
-endif()
-
-# create a Fortran shared module just copy the shared library rule
-if(NOT CMAKE_Fortran_CREATE_SHARED_MODULE)
-  set(CMAKE_Fortran_CREATE_SHARED_MODULE ${CMAKE_Fortran_CREATE_SHARED_LIBRARY})
-endif()
-
-# Create a static archive incrementally for large object file counts.
-# If CMAKE_Fortran_CREATE_STATIC_LIBRARY is set it will override these.
-if(NOT DEFINED CMAKE_Fortran_ARCHIVE_CREATE)
-  set(CMAKE_Fortran_ARCHIVE_CREATE "<CMAKE_AR> cq <TARGET> <LINK_FLAGS> <OBJECTS>")
-endif()
-if(NOT DEFINED CMAKE_Fortran_ARCHIVE_APPEND)
-  set(CMAKE_Fortran_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
-endif()
-if(NOT DEFINED CMAKE_Fortran_ARCHIVE_FINISH)
-  set(CMAKE_Fortran_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
-endif()
-
-# compile a Fortran file into an object file
-# (put -o after -c to workaround bug in at least one mpif77 wrapper)
-if(NOT CMAKE_Fortran_COMPILE_OBJECT)
-  set(CMAKE_Fortran_COMPILE_OBJECT
-    "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -c <SOURCE> -o <OBJECT>")
-endif()
-
-# link a fortran program
-if(NOT CMAKE_Fortran_LINK_EXECUTABLE)
-  set(CMAKE_Fortran_LINK_EXECUTABLE
-    "<CMAKE_Fortran_COMPILER> <CMAKE_Fortran_LINK_FLAGS> <LINK_FLAGS> <FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
-endif()
-
-if(CMAKE_Fortran_STANDARD_LIBRARIES_INIT)
-  set(CMAKE_Fortran_STANDARD_LIBRARIES "${CMAKE_Fortran_STANDARD_LIBRARIES_INIT}"
-    CACHE STRING "Libraries linked by default with all Fortran applications.")
-  mark_as_advanced(CMAKE_Fortran_STANDARD_LIBRARIES)
-endif()
-
-if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
-  set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG_INIT}" CACHE STRING
-     "Flags used by the compiler during debug builds.")
-  set (CMAKE_Fortran_FLAGS_MINSIZEREL "${CMAKE_Fortran_FLAGS_MINSIZEREL_INIT}" CACHE STRING
-     "Flags used by the compiler during release builds for minimum size.")
-  set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE_INIT}" CACHE STRING
-     "Flags used by the compiler during release builds.")
-  set (CMAKE_Fortran_FLAGS_RELWITHDEBINFO "${CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
-     "Flags used by the compiler during release builds with debug info.")
-
-endif()
-
-mark_as_advanced(
-CMAKE_Fortran_FLAGS
-CMAKE_Fortran_FLAGS_DEBUG
-CMAKE_Fortran_FLAGS_MINSIZEREL
-CMAKE_Fortran_FLAGS_RELEASE
-CMAKE_Fortran_FLAGS_RELWITHDEBINFO)
-
-# set this variable so we can avoid loading this more than once.
-set(CMAKE_Fortran_INFORMATION_LOADED 1)
diff --git a/share/cmake-3.2/Modules/CMakeGenericSystem.cmake b/share/cmake-3.2/Modules/CMakeGenericSystem.cmake
deleted file mode 100644
index 8a14aea..0000000
--- a/share/cmake-3.2/Modules/CMakeGenericSystem.cmake
+++ /dev/null
@@ -1,187 +0,0 @@
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(CMAKE_SHARED_LIBRARY_C_FLAGS "")            # -pic
-set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared")       # -shared
-set(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")         # +s, flag for exe link to use shared lib
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "")       # -rpath
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP "")   # : or empty
-set(CMAKE_INCLUDE_FLAG_C "-I")       # -I
-set(CMAKE_INCLUDE_FLAG_C_SEP "")     # , or empty
-set(CMAKE_LIBRARY_PATH_FLAG "-L")
-set(CMAKE_LIBRARY_PATH_TERMINATOR "")  # for the Digital Mars D compiler the link paths have to be terminated with a "/"
-set(CMAKE_LINK_LIBRARY_FLAG "-l")
-
-set(CMAKE_LINK_LIBRARY_SUFFIX "")
-set(CMAKE_STATIC_LIBRARY_PREFIX "lib")
-set(CMAKE_STATIC_LIBRARY_SUFFIX ".a")
-set(CMAKE_SHARED_LIBRARY_PREFIX "lib")          # lib
-set(CMAKE_SHARED_LIBRARY_SUFFIX ".so")          # .so
-set(CMAKE_EXECUTABLE_SUFFIX "")          # .exe
-set(CMAKE_DL_LIBS "dl")
-
-set(CMAKE_FIND_LIBRARY_PREFIXES "lib")
-set(CMAKE_FIND_LIBRARY_SUFFIXES ".so" ".a")
-
-# basically all general purpose OSs support shared libs
-set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS TRUE)
-
-set (CMAKE_SKIP_RPATH "NO" CACHE BOOL
-     "If set, runtime paths are not added when using shared libraries.")
-set (CMAKE_SKIP_INSTALL_RPATH "NO" CACHE BOOL
-     "If set, runtime paths are not added when installing shared libraries, but are added when building.")
-
-set(CMAKE_VERBOSE_MAKEFILE FALSE CACHE BOOL "If this value is on, makefiles will be generated without the .SILENT directive, and all commands will be echoed to the console during the make.  This is useful for debugging only. With Visual Studio IDE projects all commands are done without /nologo.")
-
-if(CMAKE_GENERATOR MATCHES "Makefiles")
-  set(CMAKE_COLOR_MAKEFILE ON CACHE BOOL
-    "Enable/Disable color output during build."
-    )
-  mark_as_advanced(CMAKE_COLOR_MAKEFILE)
-  if(DEFINED CMAKE_RULE_MESSAGES)
-    set_property(GLOBAL PROPERTY RULE_MESSAGES ${CMAKE_RULE_MESSAGES})
-  endif()
-  if(CMAKE_GENERATOR MATCHES "Unix Makefiles")
-    set(CMAKE_EXPORT_COMPILE_COMMANDS OFF CACHE BOOL
-      "Enable/Disable output of compile commands during generation."
-      )
-    mark_as_advanced(CMAKE_EXPORT_COMPILE_COMMANDS)
-  endif()
-endif()
-
-if(CMAKE_GENERATOR MATCHES "Ninja")
-  set(CMAKE_EXPORT_COMPILE_COMMANDS OFF CACHE BOOL
-    "Enable/Disable output of compile commands during generation."
-    )
-  mark_as_advanced(CMAKE_EXPORT_COMPILE_COMMANDS)
-endif()
-
-# GetDefaultWindowsPrefixBase
-#
-# Compute the base directory for CMAKE_INSTALL_PREFIX based on:
-#  - is this 32-bit or 64-bit Windows
-#  - is this 32-bit or 64-bit CMake running
-#  - what architecture targets will be built
-#
-function(GetDefaultWindowsPrefixBase var)
-
-  # Try to guess what architecture targets will end up being built as,
-  # even if CMAKE_SIZEOF_VOID_P is not computed yet... We need to know
-  # the architecture of the targets being built to choose the right
-  # default value for CMAKE_INSTALL_PREFIX.
-  #
-  if("${CMAKE_GENERATOR}" MATCHES "(Win64|IA64)")
-    set(arch_hint "x64")
-  elseif("${CMAKE_GENERATOR}" MATCHES "ARM")
-    set(arch_hint "ARM")
-  elseif("${CMAKE_SIZEOF_VOID_P}" STREQUAL "8")
-    set(arch_hint "x64")
-  elseif("$ENV{LIB}" MATCHES "(amd64|ia64)")
-    set(arch_hint "x64")
-  endif()
-
-  if(NOT arch_hint)
-    set(arch_hint "x86")
-  endif()
-
-  # default env in a 64-bit app on Win64:
-  # ProgramFiles=C:\Program Files
-  # ProgramFiles(x86)=C:\Program Files (x86)
-  # ProgramW6432=C:\Program Files
-  #
-  # default env in a 32-bit app on Win64:
-  # ProgramFiles=C:\Program Files (x86)
-  # ProgramFiles(x86)=C:\Program Files (x86)
-  # ProgramW6432=C:\Program Files
-  #
-  # default env in a 32-bit app on Win32:
-  # ProgramFiles=C:\Program Files
-  # ProgramFiles(x86) NOT DEFINED
-  # ProgramW6432 NOT DEFINED
-
-  # By default, use the ProgramFiles env var as the base value of
-  # CMAKE_INSTALL_PREFIX:
-  #
-  set(_PREFIX_ENV_VAR "ProgramFiles")
-
-  if ("$ENV{ProgramW6432}" STREQUAL "")
-    # running on 32-bit Windows
-    # must be a 32-bit CMake, too...
-    #message("guess: this is a 32-bit CMake running on 32-bit Windows")
-  else()
-    # running on 64-bit Windows
-    if ("$ENV{ProgramW6432}" STREQUAL "$ENV{ProgramFiles}")
-      # 64-bit CMake
-      #message("guess: this is a 64-bit CMake running on 64-bit Windows")
-      if(NOT "${arch_hint}" STREQUAL "x64")
-      # building 32-bit targets
-        set(_PREFIX_ENV_VAR "ProgramFiles(x86)")
-      endif()
-    else()
-      # 32-bit CMake
-      #message("guess: this is a 32-bit CMake running on 64-bit Windows")
-      if("${arch_hint}" STREQUAL "x64")
-      # building 64-bit targets
-        set(_PREFIX_ENV_VAR "ProgramW6432")
-      endif()
-    endif()
-  endif()
-
-  #if("${arch_hint}" STREQUAL "x64")
-  #  message("guess: you are building a 64-bit app")
-  #else()
-  #  message("guess: you are building a 32-bit app")
-  #endif()
-
-  if(NOT "$ENV{${_PREFIX_ENV_VAR}}" STREQUAL "")
-    file(TO_CMAKE_PATH "$ENV{${_PREFIX_ENV_VAR}}" _base)
-  elseif(NOT "$ENV{SystemDrive}" STREQUAL "")
-    set(_base "$ENV{SystemDrive}/Program Files")
-  else()
-    set(_base "C:/Program Files")
-  endif()
-
-  set(${var} "${_base}" PARENT_SCOPE)
-endfunction()
-
-
-# Set a variable to indicate whether the value of CMAKE_INSTALL_PREFIX
-# was initialized by the block below.  This is useful for user
-# projects to change the default prefix while still allowing the
-# command line to override it.
-if(NOT DEFINED CMAKE_INSTALL_PREFIX)
-  set(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT 1)
-endif()
-
-# Choose a default install prefix for this platform.
-if(CMAKE_HOST_UNIX)
-  set(CMAKE_INSTALL_PREFIX "/usr/local"
-    CACHE PATH "Install path prefix, prepended onto install directories.")
-else()
-  GetDefaultWindowsPrefixBase(CMAKE_GENERIC_PROGRAM_FILES)
-  set(CMAKE_INSTALL_PREFIX
-    "${CMAKE_GENERIC_PROGRAM_FILES}/${PROJECT_NAME}"
-    CACHE PATH "Install path prefix, prepended onto install directories.")
-  set(CMAKE_GENERIC_PROGRAM_FILES)
-endif()
-
-# Set a variable which will be used as component name in install() commands
-# where no COMPONENT has been given:
-set(CMAKE_INSTALL_DEFAULT_COMPONENT_NAME "Unspecified")
-
-mark_as_advanced(
-  CMAKE_SKIP_RPATH
-  CMAKE_SKIP_INSTALL_RPATH
-  CMAKE_VERBOSE_MAKEFILE
-)
diff --git a/share/cmake-3.2/Modules/CMakeGraphVizOptions.cmake b/share/cmake-3.2/Modules/CMakeGraphVizOptions.cmake
deleted file mode 100644
index 64c89b9..0000000
--- a/share/cmake-3.2/Modules/CMakeGraphVizOptions.cmake
+++ /dev/null
@@ -1,123 +0,0 @@
-#.rst:
-# CMakeGraphVizOptions
-# --------------------
-#
-# The builtin graphviz support of CMake.
-#
-# Variables specific to the graphviz support
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# CMake
-# can generate graphviz files, showing the dependencies between the
-# targets in a project and also external libraries which are linked
-# against.  When CMake is run with the --graphiz=foo option, it will
-# produce
-#
-# * a foo.dot file showing all dependencies in the project
-# * a foo.dot.<target> file for each target, file showing on which other targets the respective target depends
-# * a foo.dot.<target>.dependers file, showing which other targets depend on the respective target
-#
-# This can result in huge graphs.  Using the file
-# CMakeGraphVizOptions.cmake the look and content of the generated
-# graphs can be influenced.  This file is searched first in
-# ${CMAKE_BINARY_DIR} and then in ${CMAKE_SOURCE_DIR}.  If found, it is
-# read and the variables set in it are used to adjust options for the
-# generated graphviz files.
-#
-# .. variable:: GRAPHVIZ_GRAPH_TYPE
-#
-#  The graph type
-#
-#  * Mandatory : NO
-#  * Default   : "digraph"
-#
-# .. variable:: GRAPHVIZ_GRAPH_NAME
-#
-#  The graph name.
-#
-#  * Mandatory : NO
-#  * Default   : "GG"
-#
-# .. variable:: GRAPHVIZ_GRAPH_HEADER
-#
-#  The header written at the top of the graphviz file.
-#
-#  * Mandatory : NO
-#  * Default   : "node [n  fontsize = "12"];"
-#
-# .. variable:: GRAPHVIZ_NODE_PREFIX
-#
-#  The prefix for each node in the graphviz file.
-#
-#  * Mandatory : NO
-#  * Default   : "node"
-#
-# .. variable:: GRAPHVIZ_EXECUTABLES
-#
-#  Set this to FALSE to exclude executables from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_STATIC_LIBS
-#
-#  Set this to FALSE to exclude static libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_SHARED_LIBS
-#
-#  Set this to FALSE to exclude shared libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_MODULE_LIBS
-#
-#  Set this to FALSE to exclude module libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_EXTERNAL_LIBS
-#
-#  Set this to FALSE to exclude external libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_IGNORE_TARGETS
-#
-#  A list of regular expressions for ignoring targets.
-#
-#  * Mandatory : NO
-#  * Default   : empty
-#
-# .. variable:: GRAPHVIZ_GENERATE_PER_TARGET
-#
-#  Set this to FALSE to exclude per target graphs ``foo.dot.<target>``.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_GENERATE_DEPENDERS
-#
-#  Set this to FALSE to exclude depender graphs ``foo.dot.<target>.dependers``.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-# Copyright 2013 Alexander Neundorf <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
diff --git a/share/cmake-3.2/Modules/CMakePackageConfigHelpers.cmake b/share/cmake-3.2/Modules/CMakePackageConfigHelpers.cmake
deleted file mode 100644
index 206ea7a..0000000
--- a/share/cmake-3.2/Modules/CMakePackageConfigHelpers.cmake
+++ /dev/null
@@ -1,325 +0,0 @@
-#.rst:
-# CMakePackageConfigHelpers
-# -------------------------
-#
-# Helpers functions for creating config files that can be included by other
-# projects to find and use a package.
-#
-# Adds the :command:`configure_package_config_file()` and
-# :command:`write_basic_package_version_file()` commands.
-#
-# Generating a Package Configuration File
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# .. command:: configure_package_config_file
-#
-#  Create a config file for a project::
-#
-#    configure_package_config_file(<input> <output>
-#      INSTALL_DESTINATION <path>
-#      [PATH_VARS <var1> <var2> ... <varN>]
-#      [NO_SET_AND_CHECK_MACRO]
-#      [NO_CHECK_REQUIRED_COMPONENTS_MACRO]
-#      [INSTALL_PREFIX <path>]
-#      )
-#
-# ``configure_package_config_file()`` should be used instead of the plain
-# :command:`configure_file()` command when creating the ``<Name>Config.cmake``
-# or ``<Name>-config.cmake`` file for installing a project or library.  It helps
-# making the resulting package relocatable by avoiding hardcoded paths in the
-# installed ``Config.cmake`` file.
-#
-# In a ``FooConfig.cmake`` file there may be code like this to make the install
-# destinations know to the using project:
-#
-# .. code-block:: cmake
-#
-#    set(FOO_INCLUDE_DIR   "@CMAKE_INSTALL_FULL_INCLUDEDIR@" )
-#    set(FOO_DATA_DIR   "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" )
-#    set(FOO_ICONS_DIR   "@CMAKE_INSTALL_PREFIX@/share/icons" )
-#    ...logic to determine installedPrefix from the own location...
-#    set(FOO_CONFIG_DIR  "${installedPrefix}/@CONFIG_INSTALL_DIR@" )
-#
-# All 4 options shown above are not sufficient, since the first 3 hardcode the
-# absolute directory locations, and the 4th case works only if the logic to
-# determine the ``installedPrefix`` is correct, and if ``CONFIG_INSTALL_DIR``
-# contains a relative path, which in general cannot be guaranteed.  This has the
-# effect that the resulting ``FooConfig.cmake`` file would work poorly under
-# Windows and OSX, where users are used to choose the install location of a
-# binary package at install time, independent from how
-# :variable:`CMAKE_INSTALL_PREFIX` was set at build/cmake time.
-#
-# Using ``configure_package_config_file`` helps.  If used correctly, it makes
-# the resulting ``FooConfig.cmake`` file relocatable.  Usage:
-#
-# 1. write a ``FooConfig.cmake.in`` file as you are used to
-# 2. insert a line containing only the string ``@PACKAGE_INIT@``
-# 3. instead of ``set(FOO_DIR "@SOME_INSTALL_DIR@")``, use
-#    ``set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")`` (this must be after the
-#    ``@PACKAGE_INIT@`` line)
-# 4. instead of using the normal :command:`configure_file()`, use
-#    ``configure_package_config_file()``
-#
-#
-#
-# The ``<input>`` and ``<output>`` arguments are the input and output file, the
-# same way as in :command:`configure_file()`.
-#
-# The ``<path>`` given to ``INSTALL_DESTINATION`` must be the destination where
-# the ``FooConfig.cmake`` file will be installed to.  This path can either be
-# absolute, or relative to the ``INSTALL_PREFIX`` path.
-#
-# The variables ``<var1>`` to ``<varN>`` given as ``PATH_VARS`` are the
-# variables which contain install destinations.  For each of them the macro will
-# create a helper variable ``PACKAGE_<var...>``.  These helper variables must be
-# used in the ``FooConfig.cmake.in`` file for setting the installed location.
-# They are calculated by ``configure_package_config_file`` so that they are
-# always relative to the installed location of the package.  This works both for
-# relative and also for absolute locations.  For absolute locations it works
-# only if the absolute location is a subdirectory of ``INSTALL_PREFIX``.
-#
-# If the ``INSTALL_PREFIX`` argument is passed, this is used as base path to
-# calculate all the relative paths.  The ``<path>`` argument must be an absolute
-# path.  If this argument is not passed, the :variable:`CMAKE_INSTALL_PREFIX`
-# variable will be used instead.  The default value is good when generating a
-# FooConfig.cmake file to use your package from the install tree.  When
-# generating a FooConfig.cmake file to use your package from the build tree this
-# option should be used.
-#
-# By default ``configure_package_config_file`` also generates two helper macros,
-# ``set_and_check()`` and ``check_required_components()`` into the
-# ``FooConfig.cmake`` file.
-#
-# ``set_and_check()`` should be used instead of the normal ``set()`` command for
-# setting directories and file locations.  Additionally to setting the variable
-# it also checks that the referenced file or directory actually exists and fails
-# with a ``FATAL_ERROR`` otherwise.  This makes sure that the created
-# ``FooConfig.cmake`` file does not contain wrong references.
-# When using the ``NO_SET_AND_CHECK_MACRO``, this macro is not generated
-# into the ``FooConfig.cmake`` file.
-#
-# ``check_required_components(<package_name>)`` should be called at the end of
-# the ``FooConfig.cmake`` file if the package supports components.  This macro
-# checks whether all requested, non-optional components have been found, and if
-# this is not the case, sets the ``Foo_FOUND`` variable to ``FALSE``, so that
-# the package is considered to be not found.  It does that by testing the
-# ``Foo_<Component>_FOUND`` variables for all requested required components.
-# When using the ``NO_CHECK_REQUIRED_COMPONENTS_MACRO`` option, this macro is
-# not generated into the ``FooConfig.cmake`` file.
-#
-# For an example see below the documentation for
-# :command:`write_basic_package_version_file()`.
-#
-# Generating a Package Version File
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# .. command:: write_basic_package_version_file
-#
-#  Create a version file for a project::
-#
-#    write_basic_package_version_file(<filename>
-#      [VERSION <major.minor.patch>]
-#      COMPATIBILITY <AnyNewerVersion|SameMajorVersion|ExactVersion> )
-#
-#
-# Writes a file for use as ``<package>ConfigVersion.cmake`` file to
-# ``<filename>``.  See the documentation of :command:`find_package()` for
-# details on this.
-#
-# ``<filename>`` is the output filename, it should be in the build tree.
-# ``<major.minor.patch>`` is the version number of the project to be installed.
-#
-# If no ``VERSION`` is given, the :variable:`PROJECT_VERSION` variable is used.
-# If this hasn't been set, it errors out.
-#
-# The ``COMPATIBILITY`` mode ``AnyNewerVersion`` means that the installed
-# package version will be considered compatible if it is newer or exactly the
-# same as the requested version.  This mode should be used for packages which
-# are fully backward compatible, also across major versions.
-# If ``SameMajorVersion`` is used instead, then the behaviour differs from
-# ``AnyNewerVersion`` in that the major version number must be the same as
-# requested, e.g.  version 2.0 will not be considered compatible if 1.0 is
-# requested.  This mode should be used for packages which guarantee backward
-# compatibility within the same major version.
-# If ``ExactVersion`` is used, then the package is only considered compatible if
-# the requested version matches exactly its own version number (not considering
-# the tweak version).  For example, version 1.2.3 of a package is only
-# considered compatible to requested version 1.2.3.  This mode is for packages
-# without compatibility guarantees.
-# If your project has more elaborated version matching rules, you will need to
-# write your own custom ``ConfigVersion.cmake`` file instead of using this
-# macro.
-#
-# Internally, this macro executes :command:`configure_file()` to create the
-# resulting version file.  Depending on the ``COMPATIBLITY``, either the file
-# ``BasicConfigVersion-SameMajorVersion.cmake.in`` or
-# ``BasicConfigVersion-AnyNewerVersion.cmake.in`` is used.  Please note that
-# these two files are internal to CMake and you should not call
-# :command:`configure_file()` on them yourself, but they can be used as starting
-# point to create more sophisticted custom ``ConfigVersion.cmake`` files.
-#
-# Example Generating Package Files
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# Example using both :command:`configure_package_config_file` and
-# ``write_basic_package_version_file()``:
-#
-# ``CMakeLists.txt``:
-#
-# .. code-block:: cmake
-#
-#    set(INCLUDE_INSTALL_DIR include/ ... CACHE )
-#    set(LIB_INSTALL_DIR lib/ ... CACHE )
-#    set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE )
-#    ...
-#    include(CMakePackageConfigHelpers)
-#    configure_package_config_file(FooConfig.cmake.in
-#      ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
-#      INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake
-#      PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR)
-#    write_basic_package_version_file(
-#      ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
-#      VERSION 1.2.3
-#      COMPATIBILITY SameMajorVersion )
-#    install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
-#                  ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
-#            DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake )
-#
-# ``FooConfig.cmake.in``:
-#
-# .. code-block:: cmake
-#
-#    set(FOO_VERSION x.y.z)
-#    ...
-#    @PACKAGE_INIT@
-#    ...
-#    set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
-#    set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@")
-#
-#    check_required_components(Foo)
-
-
-#=============================================================================
-# Copyright 2012 Alexander Neundorf <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(CMakeParseArguments)
-
-include(WriteBasicConfigVersionFile)
-
-macro(WRITE_BASIC_PACKAGE_VERSION_FILE)
-  write_basic_config_version_file(${ARGN})
-endmacro()
-
-function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile)
-  set(options NO_SET_AND_CHECK_MACRO NO_CHECK_REQUIRED_COMPONENTS_MACRO)
-  set(oneValueArgs INSTALL_DESTINATION INSTALL_PREFIX)
-  set(multiValueArgs PATH_VARS )
-
-  cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
-
-  if(CCF_UNPARSED_ARGUMENTS)
-    message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"")
-  endif()
-
-  if(NOT CCF_INSTALL_DESTINATION)
-    message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()")
-  endif()
-
-  if(DEFINED CCF_INSTALL_PREFIX)
-    if(IS_ABSOLUTE "${CCF_INSTALL_PREFIX}")
-      set(installPrefix "${CCF_INSTALL_PREFIX}")
-    else()
-      message(FATAL_ERROR "INSTALL_PREFIX must be an absolute path")
-    endif()
-  else()
-    set(installPrefix "${CMAKE_INSTALL_PREFIX}")
-  endif()
-
-  if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}")
-    set(absInstallDir "${CCF_INSTALL_DESTINATION}")
-  else()
-    set(absInstallDir "${installPrefix}/${CCF_INSTALL_DESTINATION}")
-  endif()
-
-  file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${installPrefix}" )
-
-  foreach(var ${CCF_PATH_VARS})
-    if(NOT DEFINED ${var})
-      message(FATAL_ERROR "Variable ${var} does not exist")
-    else()
-      if(IS_ABSOLUTE "${${var}}")
-        string(REPLACE "${installPrefix}" "\${PACKAGE_PREFIX_DIR}"
-                        PACKAGE_${var} "${${var}}")
-      else()
-        set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}")
-      endif()
-    endif()
-  endforeach()
-
-  get_filename_component(inputFileName "${_inputFile}" NAME)
-
-  set(PACKAGE_INIT "
-####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
-####### Any changes to this file will be overwritten by the next CMake run ####
-####### The input file was ${inputFileName}                            ########
-
-get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE)
-")
-
-  if("${absInstallDir}" MATCHES "^(/usr)?/lib(64)?/.+")
-    # Handle "/usr move" symlinks created by some Linux distros.
-    set(PACKAGE_INIT "${PACKAGE_INIT}
-# Use original install prefix when loaded through a \"/usr move\"
-# cross-prefix symbolic link such as /lib -> /usr/lib.
-get_filename_component(_realCurr \"\${CMAKE_CURRENT_LIST_DIR}\" REALPATH)
-get_filename_component(_realOrig \"${absInstallDir}\" REALPATH)
-if(_realCurr STREQUAL _realOrig)
-  set(PACKAGE_PREFIX_DIR \"${installPrefix}\")
-endif()
-unset(_realOrig)
-unset(_realCurr)
-")
-  endif()
-
-  if(NOT CCF_NO_SET_AND_CHECK_MACRO)
-    set(PACKAGE_INIT "${PACKAGE_INIT}
-macro(set_and_check _var _file)
-  set(\${_var} \"\${_file}\")
-  if(NOT EXISTS \"\${_file}\")
-    message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\")
-  endif()
-endmacro()
-")
-  endif()
-
-
-  if(NOT CCF_NO_CHECK_REQUIRED_COMPONENTS_MACRO)
-    set(PACKAGE_INIT "${PACKAGE_INIT}
-macro(check_required_components _NAME)
-  foreach(comp \${\${_NAME}_FIND_COMPONENTS})
-    if(NOT \${_NAME}_\${comp}_FOUND)
-      if(\${_NAME}_FIND_REQUIRED_\${comp})
-        set(\${_NAME}_FOUND FALSE)
-      endif()
-    endif()
-  endforeach()
-endmacro()
-")
-  endif()
-
-  set(PACKAGE_INIT "${PACKAGE_INIT}
-####################################################################################")
-
-  configure_file("${_inputFile}" "${_outputFile}" @ONLY)
-
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeParseArguments.cmake b/share/cmake-3.2/Modules/CMakeParseArguments.cmake
deleted file mode 100644
index 8553f38..0000000
--- a/share/cmake-3.2/Modules/CMakeParseArguments.cmake
+++ /dev/null
@@ -1,161 +0,0 @@
-#.rst:
-# CMakeParseArguments
-# -------------------
-#
-#
-#
-# CMAKE_PARSE_ARGUMENTS(<prefix> <options> <one_value_keywords>
-# <multi_value_keywords> args...)
-#
-# CMAKE_PARSE_ARGUMENTS() is intended to be used in macros or functions
-# for parsing the arguments given to that macro or function.  It
-# processes the arguments and defines a set of variables which hold the
-# values of the respective options.
-#
-# The <options> argument contains all options for the respective macro,
-# i.e.  keywords which can be used when calling the macro without any
-# value following, like e.g.  the OPTIONAL keyword of the install()
-# command.
-#
-# The <one_value_keywords> argument contains all keywords for this macro
-# which are followed by one value, like e.g.  DESTINATION keyword of the
-# install() command.
-#
-# The <multi_value_keywords> argument contains all keywords for this
-# macro which can be followed by more than one value, like e.g.  the
-# TARGETS or FILES keywords of the install() command.
-#
-# When done, CMAKE_PARSE_ARGUMENTS() will have defined for each of the
-# keywords listed in <options>, <one_value_keywords> and
-# <multi_value_keywords> a variable composed of the given <prefix>
-# followed by "_" and the name of the respective keyword.  These
-# variables will then hold the respective value from the argument list.
-# For the <options> keywords this will be TRUE or FALSE.
-#
-# All remaining arguments are collected in a variable
-# <prefix>_UNPARSED_ARGUMENTS, this can be checked afterwards to see
-# whether your macro was called with unrecognized parameters.
-#
-# As an example here a my_install() macro, which takes similar arguments
-# as the real install() command:
-#
-# ::
-#
-#    function(MY_INSTALL)
-#      set(options OPTIONAL FAST)
-#      set(oneValueArgs DESTINATION RENAME)
-#      set(multiValueArgs TARGETS CONFIGURATIONS)
-#      cmake_parse_arguments(MY_INSTALL "${options}" "${oneValueArgs}"
-#                            "${multiValueArgs}" ${ARGN} )
-#      ...
-#
-#
-#
-# Assume my_install() has been called like this:
-#
-# ::
-#
-#    my_install(TARGETS foo bar DESTINATION bin OPTIONAL blub)
-#
-#
-#
-# After the cmake_parse_arguments() call the macro will have set the
-# following variables:
-#
-# ::
-#
-#    MY_INSTALL_OPTIONAL = TRUE
-#    MY_INSTALL_FAST = FALSE (this option was not used when calling my_install()
-#    MY_INSTALL_DESTINATION = "bin"
-#    MY_INSTALL_RENAME = "" (was not used)
-#    MY_INSTALL_TARGETS = "foo;bar"
-#    MY_INSTALL_CONFIGURATIONS = "" (was not used)
-#    MY_INSTALL_UNPARSED_ARGUMENTS = "blub" (no value expected after "OPTIONAL"
-#
-#
-#
-# You can then continue and process these variables.
-#
-# Keywords terminate lists of values, e.g.  if directly after a
-# one_value_keyword another recognized keyword follows, this is
-# interpreted as the beginning of the new option.  E.g.
-# my_install(TARGETS foo DESTINATION OPTIONAL) would result in
-# MY_INSTALL_DESTINATION set to "OPTIONAL", but MY_INSTALL_DESTINATION
-# would be empty and MY_INSTALL_OPTIONAL would be set to TRUE therefor.
-
-#=============================================================================
-# Copyright 2010 Alexander Neundorf <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-if(__CMAKE_PARSE_ARGUMENTS_INCLUDED)
-  return()
-endif()
-set(__CMAKE_PARSE_ARGUMENTS_INCLUDED TRUE)
-
-
-function(CMAKE_PARSE_ARGUMENTS prefix _optionNames _singleArgNames _multiArgNames)
-  # first set all result variables to empty/FALSE
-  foreach(arg_name ${_singleArgNames} ${_multiArgNames})
-    set(${prefix}_${arg_name})
-  endforeach()
-
-  foreach(option ${_optionNames})
-    set(${prefix}_${option} FALSE)
-  endforeach()
-
-  set(${prefix}_UNPARSED_ARGUMENTS)
-
-  set(insideValues FALSE)
-  set(currentArgName)
-
-  # now iterate over all arguments and fill the result variables
-  foreach(currentArg ${ARGN})
-    list(FIND _optionNames "${currentArg}" optionIndex)  # ... then this marks the end of the arguments belonging to this keyword
-    list(FIND _singleArgNames "${currentArg}" singleArgIndex)  # ... then this marks the end of the arguments belonging to this keyword
-    list(FIND _multiArgNames "${currentArg}" multiArgIndex)  # ... then this marks the end of the arguments belonging to this keyword
-
-    if(${optionIndex} EQUAL -1  AND  ${singleArgIndex} EQUAL -1  AND  ${multiArgIndex} EQUAL -1)
-      if(insideValues)
-        if("${insideValues}" STREQUAL "SINGLE")
-          set(${prefix}_${currentArgName} ${currentArg})
-          set(insideValues FALSE)
-        elseif("${insideValues}" STREQUAL "MULTI")
-          list(APPEND ${prefix}_${currentArgName} ${currentArg})
-        endif()
-      else()
-        list(APPEND ${prefix}_UNPARSED_ARGUMENTS ${currentArg})
-      endif()
-    else()
-      if(NOT ${optionIndex} EQUAL -1)
-        set(${prefix}_${currentArg} TRUE)
-        set(insideValues FALSE)
-      elseif(NOT ${singleArgIndex} EQUAL -1)
-        set(currentArgName ${currentArg})
-        set(${prefix}_${currentArgName})
-        set(insideValues "SINGLE")
-      elseif(NOT ${multiArgIndex} EQUAL -1)
-        set(currentArgName ${currentArg})
-        set(${prefix}_${currentArgName})
-        set(insideValues "MULTI")
-      endif()
-    endif()
-
-  endforeach()
-
-  # propagate the result variables to the caller:
-  foreach(arg_name ${_singleArgNames} ${_multiArgNames} ${_optionNames})
-    set(${prefix}_${arg_name}  ${${prefix}_${arg_name}} PARENT_SCOPE)
-  endforeach()
-  set(${prefix}_UNPARSED_ARGUMENTS ${${prefix}_UNPARSED_ARGUMENTS} PARENT_SCOPE)
-
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeParseImplicitLinkInfo.cmake b/share/cmake-3.2/Modules/CMakeParseImplicitLinkInfo.cmake
deleted file mode 100644
index fcc13da..0000000
--- a/share/cmake-3.2/Modules/CMakeParseImplicitLinkInfo.cmake
+++ /dev/null
@@ -1,169 +0,0 @@
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Function parse implicit linker options.
-# This is used internally by CMake and should not be included by user
-# code.
-
-function(CMAKE_PARSE_IMPLICIT_LINK_INFO text lib_var dir_var fwk_var log_var obj_regex)
-  set(implicit_libs_tmp "")
-  set(implicit_dirs_tmp)
-  set(implicit_fwks_tmp)
-  set(log "")
-
-  # Parse implicit linker arguments.
-  set(linker "CMAKE_LINKER-NOTFOUND")
-  if(CMAKE_LINKER)
-    get_filename_component(linker ${CMAKE_LINKER} NAME)
-    string(REGEX REPLACE "([][+.*?()^$])" "\\\\\\1" linker "${linker}")
-  endif()
-  # Construct a regex to match linker lines.  It must match both the
-  # whole line and just the command (argv[0]).
-  set(linker_regex "^( *|.*[/\\])(${linker}|([^/\\]+-)?ld|collect2)[^/\\]*( |$)")
-  set(linker_exclude_regex "collect2 version ")
-  set(log "${log}  link line regex: [${linker_regex}]\n")
-  string(REGEX REPLACE "\r?\n" ";" output_lines "${text}")
-  foreach(line IN LISTS output_lines)
-    set(cmd)
-    if("${line}" MATCHES "${linker_regex}" AND
-        NOT "${line}" MATCHES "${linker_exclude_regex}")
-      if(XCODE)
-        # Xcode unconditionally adds a path under the project build tree and
-        # on older versions it is not reported with proper quotes.  Remove it.
-        string(REGEX REPLACE "([][+.*()^])" "\\\\\\1" _dir_regex "${CMAKE_BINARY_DIR}")
-        string(REGEX REPLACE " -[FL]${_dir_regex}/([^ ]| [^-])+( |$)" " " xline "${line}")
-        if(NOT "x${xline}" STREQUAL "x${line}")
-          set(log "${log}  reduced line: [${line}]\n            to: [${xline}]\n")
-          set(line "${xline}")
-        endif()
-      endif()
-      if(UNIX)
-        separate_arguments(args UNIX_COMMAND "${line}")
-      else()
-        separate_arguments(args WINDOWS_COMMAND "${line}")
-      endif()
-      list(GET args 0 cmd)
-    endif()
-    if("${cmd}" MATCHES "${linker_regex}")
-      set(log "${log}  link line: [${line}]\n")
-      string(REGEX REPLACE ";-([LYz]);" ";-\\1" args "${args}")
-      foreach(arg IN LISTS args)
-        if("${arg}" MATCHES "^-L(.:)?[/\\]")
-          # Unix search path.
-          string(REGEX REPLACE "^-L" "" dir "${arg}")
-          list(APPEND implicit_dirs_tmp ${dir})
-          set(log "${log}    arg [${arg}] ==> dir [${dir}]\n")
-        elseif("${arg}" MATCHES "^-l([^:].*)$")
-          # Unix library.
-          set(lib "${CMAKE_MATCH_1}")
-          list(APPEND implicit_libs_tmp ${lib})
-          set(log "${log}    arg [${arg}] ==> lib [${lib}]\n")
-        elseif("${arg}" MATCHES "^(.:)?[/\\].*\\.a$")
-          # Unix library full path.
-          list(APPEND implicit_libs_tmp ${arg})
-          set(log "${log}    arg [${arg}] ==> lib [${arg}]\n")
-        elseif("${arg}" MATCHES "^(.:)?[/\\].*\\.o$"
-            AND obj_regex AND "${arg}" MATCHES "${obj_regex}")
-          # Object file full path.
-          list(APPEND implicit_libs_tmp ${arg})
-          set(log "${log}    arg [${arg}] ==> obj [${arg}]\n")
-        elseif("${arg}" MATCHES "^-Y(P,)?[^0-9]")
-          # Sun search path ([^0-9] avoids conflict with Mac -Y<num>).
-          string(REGEX REPLACE "^-Y(P,)?" "" dirs "${arg}")
-          string(REPLACE ":" ";" dirs "${dirs}")
-          list(APPEND implicit_dirs_tmp ${dirs})
-          set(log "${log}    arg [${arg}] ==> dirs [${dirs}]\n")
-        elseif("${arg}" MATCHES "^-l:")
-          # HP named library.
-          list(APPEND implicit_libs_tmp ${arg})
-          set(log "${log}    arg [${arg}] ==> lib [${arg}]\n")
-        elseif("${arg}" MATCHES "^-z(all|default|weak)extract")
-          # Link editor option.
-          list(APPEND implicit_libs_tmp ${arg})
-          set(log "${log}    arg [${arg}] ==> opt [${arg}]\n")
-        else()
-          set(log "${log}    arg [${arg}] ==> ignore\n")
-        endif()
-      endforeach()
-      break()
-    elseif("${line}" MATCHES "LPATH(=| is:? *)(.*)$")
-      set(log "${log}  LPATH line: [${line}]\n")
-      # HP search path.
-      string(REPLACE ":" ";" paths "${CMAKE_MATCH_2}")
-      list(APPEND implicit_dirs_tmp ${paths})
-      set(log "${log}    dirs [${paths}]\n")
-    else()
-      set(log "${log}  ignore line: [${line}]\n")
-    endif()
-  endforeach()
-
-  # Look for library search paths reported by linker.
-  if("${output_lines}" MATCHES ";Library search paths:((;\t[^;]+)+)")
-    string(REPLACE ";\t" ";" implicit_dirs_match "${CMAKE_MATCH_1}")
-    set(log "${log}  Library search paths: [${implicit_dirs_match}]\n")
-    list(APPEND implicit_dirs_tmp ${implicit_dirs_match})
-  endif()
-  if("${output_lines}" MATCHES ";Framework search paths:((;\t[^;]+)+)")
-    string(REPLACE ";\t" ";" implicit_fwks_match "${CMAKE_MATCH_1}")
-    set(log "${log}  Framework search paths: [${implicit_fwks_match}]\n")
-    list(APPEND implicit_fwks_tmp ${implicit_fwks_match})
-  endif()
-
-  # Cleanup list of libraries and flags.
-  # We remove items that are not language-specific.
-  set(implicit_libs "")
-  foreach(lib IN LISTS implicit_libs_tmp)
-    if("${lib}" MATCHES "^(crt.*\\.o|gcc.*|System.*)$")
-      set(log "${log}  remove lib [${lib}]\n")
-    elseif(IS_ABSOLUTE "${lib}")
-      get_filename_component(abs "${lib}" ABSOLUTE)
-      if(NOT "x${lib}" STREQUAL "x${abs}")
-        set(log "${log}  collapse lib [${lib}] ==> [${abs}]\n")
-      endif()
-      list(APPEND implicit_libs "${abs}")
-    else()
-      list(APPEND implicit_libs "${lib}")
-    endif()
-  endforeach()
-
-  # Cleanup list of library and framework directories.
-  set(desc_dirs "library")
-  set(desc_fwks "framework")
-  foreach(t dirs fwks)
-    set(implicit_${t} "")
-    foreach(d IN LISTS implicit_${t}_tmp)
-      get_filename_component(dir "${d}" ABSOLUTE)
-      string(FIND "${dir}" "${CMAKE_FILES_DIRECTORY}/" pos)
-      if(NOT pos LESS 0)
-        set(msg ", skipping non-system directory")
-      else()
-        set(msg "")
-        list(APPEND implicit_${t} "${dir}")
-      endif()
-      set(log "${log}  collapse ${desc_${t}} dir [${d}] ==> [${dir}]${msg}\n")
-    endforeach()
-    list(REMOVE_DUPLICATES implicit_${t})
-  endforeach()
-
-  # Log results.
-  set(log "${log}  implicit libs: [${implicit_libs}]\n")
-  set(log "${log}  implicit dirs: [${implicit_dirs}]\n")
-  set(log "${log}  implicit fwks: [${implicit_fwks}]\n")
-
-  # Return results.
-  set(${lib_var} "${implicit_libs}" PARENT_SCOPE)
-  set(${dir_var} "${implicit_dirs}" PARENT_SCOPE)
-  set(${fwk_var} "${implicit_fwks}" PARENT_SCOPE)
-  set(${log_var} "${log}" PARENT_SCOPE)
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakePlatformId.h.in b/share/cmake-3.2/Modules/CMakePlatformId.h.in
deleted file mode 100644
index bc26c07..0000000
--- a/share/cmake-3.2/Modules/CMakePlatformId.h.in
+++ /dev/null
@@ -1,206 +0,0 @@
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__sgi) || defined(__sgi__) || defined(_SGI)
-# define PLATFORM_ID "IRIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# else /* unknown platform */
-#  define PLATFORM_ID ""
-# endif
-
-#else /* unknown platform */
-# define PLATFORM_ID ""
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID ""
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number components. */
-#ifdef COMPILER_VERSION_MAJOR
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
diff --git a/share/cmake-3.2/Modules/CMakePushCheckState.cmake b/share/cmake-3.2/Modules/CMakePushCheckState.cmake
deleted file mode 100644
index bf4ec0e..0000000
--- a/share/cmake-3.2/Modules/CMakePushCheckState.cmake
+++ /dev/null
@@ -1,94 +0,0 @@
-#.rst:
-# CMakePushCheckState
-# -------------------
-#
-#
-#
-# This module defines three macros: CMAKE_PUSH_CHECK_STATE()
-# CMAKE_POP_CHECK_STATE() and CMAKE_RESET_CHECK_STATE() These macros can
-# be used to save, restore and reset (i.e., clear contents) the state of
-# the variables CMAKE_REQUIRED_FLAGS, CMAKE_REQUIRED_DEFINITIONS,
-# CMAKE_REQUIRED_LIBRARIES and CMAKE_REQUIRED_INCLUDES used by the
-# various Check-files coming with CMake, like e.g.
-# check_function_exists() etc.  The variable contents are pushed on a
-# stack, pushing multiple times is supported.  This is useful e.g.  when
-# executing such tests in a Find-module, where they have to be set, but
-# after the Find-module has been executed they should have the same
-# value as they had before.
-#
-# CMAKE_PUSH_CHECK_STATE() macro receives optional argument RESET.
-# Whether it's specified, CMAKE_PUSH_CHECK_STATE() will set all
-# CMAKE_REQUIRED_* variables to empty values, same as
-# CMAKE_RESET_CHECK_STATE() call will do.
-#
-# Usage:
-#
-# ::
-#
-#    cmake_push_check_state(RESET)
-#    set(CMAKE_REQUIRED_DEFINITIONS -DSOME_MORE_DEF)
-#    check_function_exists(...)
-#    cmake_reset_check_state()
-#    set(CMAKE_REQUIRED_DEFINITIONS -DANOTHER_DEF)
-#    check_function_exists(...)
-#    cmake_pop_check_state()
-
-#=============================================================================
-# Copyright 2006-2011 Alexander Neundorf, <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-macro(CMAKE_RESET_CHECK_STATE)
-
-   set(CMAKE_REQUIRED_INCLUDES)
-   set(CMAKE_REQUIRED_DEFINITIONS)
-   set(CMAKE_REQUIRED_LIBRARIES)
-   set(CMAKE_REQUIRED_FLAGS)
-   set(CMAKE_REQUIRED_QUIET)
-
-endmacro()
-
-macro(CMAKE_PUSH_CHECK_STATE)
-
-   if(NOT DEFINED _CMAKE_PUSH_CHECK_STATE_COUNTER)
-      set(_CMAKE_PUSH_CHECK_STATE_COUNTER 0)
-   endif()
-
-   math(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}+1")
-
-   set(_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}    ${CMAKE_REQUIRED_INCLUDES})
-   set(_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER} ${CMAKE_REQUIRED_DEFINITIONS})
-   set(_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}   ${CMAKE_REQUIRED_LIBRARIES})
-   set(_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}       ${CMAKE_REQUIRED_FLAGS})
-   set(_CMAKE_REQUIRED_QUIET_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}       ${CMAKE_REQUIRED_QUIET})
-
-   if (ARGC GREATER 0 AND ARGV0 STREQUAL "RESET")
-      cmake_reset_check_state()
-   endif()
-
-endmacro()
-
-macro(CMAKE_POP_CHECK_STATE)
-
-# don't pop more than we pushed
-   if("${_CMAKE_PUSH_CHECK_STATE_COUNTER}" GREATER "0")
-
-      set(CMAKE_REQUIRED_INCLUDES    ${_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
-      set(CMAKE_REQUIRED_DEFINITIONS ${_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
-      set(CMAKE_REQUIRED_LIBRARIES   ${_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
-      set(CMAKE_REQUIRED_FLAGS       ${_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
-      set(CMAKE_REQUIRED_QUIET       ${_CMAKE_REQUIRED_QUIET_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
-
-      math(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}-1")
-   endif()
-
-endmacro()
diff --git a/share/cmake-3.2/Modules/CMakeRCInformation.cmake b/share/cmake-3.2/Modules/CMakeRCInformation.cmake
deleted file mode 100644
index 6bb2636..0000000
--- a/share/cmake-3.2/Modules/CMakeRCInformation.cmake
+++ /dev/null
@@ -1,54 +0,0 @@
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-# This file sets the basic flags for the Windows Resource Compiler.
-# It also loads the available platform file for the system-compiler
-# if it exists.
-
-# make sure we don't use CMAKE_BASE_NAME from somewhere else
-set(CMAKE_BASE_NAME)
-if(CMAKE_RC_COMPILER MATCHES "windres[^/]*$")
- set(CMAKE_BASE_NAME "windres")
-else()
- get_filename_component(CMAKE_BASE_NAME ${CMAKE_RC_COMPILER} NAME_WE)
-endif()
-set(CMAKE_SYSTEM_AND_RC_COMPILER_INFO_FILE
-  ${CMAKE_ROOT}/Modules/Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}.cmake)
-include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL)
-
-
-
-set (CMAKE_RC_FLAGS "$ENV{RCFLAGS} ${CMAKE_RC_FLAGS_INIT}" CACHE STRING
-     "Flags for Windows Resource Compiler.")
-
-# These are the only types of flags that should be passed to the rc
-# command, if COMPILE_FLAGS is used on a target this will be used
-# to filter out any other flags
-set(CMAKE_RC_FLAG_REGEX "^[-/](D|I)")
-
-# now define the following rule variables
-# CMAKE_RC_COMPILE_OBJECT
-set(CMAKE_INCLUDE_FLAG_RC "-I")
-# compile a Resource file into an object file
-if(NOT CMAKE_RC_COMPILE_OBJECT)
-  set(CMAKE_RC_COMPILE_OBJECT
-    "<CMAKE_RC_COMPILER> <FLAGS> <DEFINES> /fo<OBJECT> <SOURCE>")
-endif()
-
-mark_as_advanced(
-CMAKE_RC_FLAGS
-)
-# set this variable so we can avoid loading this more than once.
-set(CMAKE_RC_INFORMATION_LOADED 1)
diff --git a/share/cmake-3.2/Modules/CMakeTestCompilerCommon.cmake b/share/cmake-3.2/Modules/CMakeTestCompilerCommon.cmake
deleted file mode 100644
index d51b503..0000000
--- a/share/cmake-3.2/Modules/CMakeTestCompilerCommon.cmake
+++ /dev/null
@@ -1,21 +0,0 @@
-
-#=============================================================================
-# Copyright 2010 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-function(PrintTestCompilerStatus LANG MSG)
-  if(CMAKE_GENERATOR MATCHES Make)
-    message(STATUS "Check for working ${LANG} compiler: ${CMAKE_${LANG}_COMPILER}${MSG}")
-  else()
-    message(STATUS "Check for working ${LANG} compiler using: ${CMAKE_GENERATOR}${MSG}")
-  endif()
-endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeTestWatcomVersion.c b/share/cmake-3.2/Modules/CMakeTestWatcomVersion.c
deleted file mode 100644
index 0343fb1..0000000
--- a/share/cmake-3.2/Modules/CMakeTestWatcomVersion.c
+++ /dev/null
@@ -1 +0,0 @@
-VERSION=__WATCOMC__
diff --git a/share/cmake-3.2/Modules/CMakeVS6BackwardCompatibility.cmake b/share/cmake-3.2/Modules/CMakeVS6BackwardCompatibility.cmake
deleted file mode 100644
index ca48b85..0000000
--- a/share/cmake-3.2/Modules/CMakeVS6BackwardCompatibility.cmake
+++ /dev/null
@@ -1,26 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# hard code these for fast backwards compatibility tests
-set (CMAKE_SIZEOF_INT       4   CACHE INTERNAL "Size of int data type")
-set (CMAKE_SIZEOF_LONG      4   CACHE INTERNAL "Size of long data type")
-set (CMAKE_SIZEOF_VOID_P    4   CACHE INTERNAL "Size of void* data type")
-set (CMAKE_SIZEOF_CHAR      1   CACHE INTERNAL "Size of char data type")
-set (CMAKE_SIZEOF_SHORT     2   CACHE INTERNAL "Size of short data type")
-set (CMAKE_SIZEOF_FLOAT     4   CACHE INTERNAL "Size of float data type")
-set (CMAKE_SIZEOF_DOUBLE    8   CACHE INTERNAL "Size of double data type")
-set (CMAKE_NO_ANSI_FOR_SCOPE 1 CACHE INTERNAL
-         "Does the compiler support ansi for scope.")
-set (CMAKE_USE_WIN32_THREADS  TRUE CACHE BOOL    "Use the win32 thread library.")
-set (CMAKE_WORDS_BIGENDIAN 0 CACHE INTERNAL "endianness of bytes")
diff --git a/share/cmake-3.2/Modules/CMakeVerifyManifest.cmake b/share/cmake-3.2/Modules/CMakeVerifyManifest.cmake
deleted file mode 100644
index bff4e1e..0000000
--- a/share/cmake-3.2/Modules/CMakeVerifyManifest.cmake
+++ /dev/null
@@ -1,120 +0,0 @@
-#.rst:
-# CMakeVerifyManifest
-# -------------------
-#
-#
-#
-# CMakeVerifyManifest.cmake
-#
-# This script is used to verify that embeded manifests and side by side
-# manifests for a project match.  To run this script, cd to a directory
-# and run the script with cmake -P.  On the command line you can pass in
-# versions that are OK even if not found in the .manifest files.  For
-# example, cmake -Dallow_versions=8.0.50608.0
-# -PCmakeVerifyManifest.cmake could be used to allow an embeded manifest
-# of 8.0.50608.0 to be used in a project even if that version was not
-# found in the .manifest file.
-
-# This script first recursively globs *.manifest files from
-# the current directory.  Then globs *.exe and *.dll.  Each
-# .exe and .dll is scanned for embeded manifests and the versions
-# of CRT are compared to those found in the .manifest files
-# from the first glob.
-
-#=============================================================================
-# Copyright 2008-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-# crt_version:
-# function to extract the CRT version from a file
-# this can be passed a .exe, .dll, or a .manifest file
-# it will put the list of versions found into the variable
-# specified by list_var
-function(crt_version file list_var)
-  file(STRINGS "${file}" strings REGEX "Microsoft.VC...CRT" NEWLINE_CONSUME)
-  foreach(s ${strings})
-    set(has_match 1)
-    string(REGEX
-      REPLACE ".*<assembly.*\"Microsoft.VC...CRT\".*version=\"([^\"]*)\".*</assembly>.*$" "\\1"
-      version "${s}")
-    if(NOT "${version}" STREQUAL "")
-      list(APPEND version_list ${version})
-    else()
-      message(FATAL_ERROR "Parse error could not find version in [${s}]")
-    endif()
-  endforeach()
-  if(NOT DEFINED has_match)
-    message("Information: no embeded manifest in: ${file}")
-    return()
-  endif()
-  list(APPEND version_list ${${list_var}})
-  list(REMOVE_DUPLICATES version_list)
-  if(version_list)
-    set(${list_var} ${version_list} PARENT_SCOPE)
-  endif()
-endfunction()
-set(fatal_error FALSE)
-
-# check_version:
-#
-# test a file against the shipped manifest versions
-# for a directory
-function(check_version file manifest_versions)
-  set(manifest_versions ${manifest_versions} ${allow_versions})
-  # collect versions for a given file
-  crt_version(${file} file_versions)
-  # see if the versions
-  foreach(ver ${file_versions})
-    list(FIND manifest_versions "${ver}" found_version)
-    if("${found_version}" EQUAL -1)
-      message("ERROR: ${file} uses ${ver} not found in shipped manifests:[${manifest_versions}].")
-      set(fatal_error TRUE PARENT_SCOPE)
-    endif()
-  endforeach()
-  list(LENGTH file_versions len)
-  if(${len} GREATER 1)
-    message("WARNING: found more than one version of MICROSOFT.VC80.CRT referenced in ${file}: [${file_versions}]")
-  endif()
-endfunction()
-
-# collect up the versions of CRT that are shipped
-# in .manifest files
-set(manifest_version_list )
-file(GLOB_RECURSE manifest_files "*.manifest")
-foreach(f ${manifest_files})
-  crt_version("${f}" manifest_version_list)
-endforeach()
-list(LENGTH manifest_version_list LEN)
-if(LEN EQUAL 0)
-  message(FATAL_ERROR "No .manifest files found, no version check can be done.")
-endif()
-message("Versions found in ${manifest_files}: ${manifest_version_list}")
-if(DEFINED allow_versions)
-  message("Extra versions allowed: ${allow_versions}")
-endif()
-
-# now find all .exe and .dll files
-# and call check_version on each of them
-file(GLOB_RECURSE exe_files "*.exe")
-file(GLOB_RECURSE dll_files "*.dll")
-set(exe_files ${exe_files} ${dll_files})
-foreach(f ${exe_files})
-  check_version(${f} "${manifest_version_list}")
-endforeach()
-
-# report a fatal error if there were any so that cmake will return
-# a non zero value
-if(fatal_error)
-  message(FATAL_ERROR "This distribution embeds dll "
-    " versions that it does not ship, and may not work on other machines.")
-endif()
diff --git a/share/cmake-3.2/Modules/CPack.OSXX11.Info.plist.in b/share/cmake-3.2/Modules/CPack.OSXX11.Info.plist.in
deleted file mode 100644
index 851b67b..0000000
--- a/share/cmake-3.2/Modules/CPack.OSXX11.Info.plist.in
+++ /dev/null
@@ -1,49 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-<dict>
-	<key>CFBundleDevelopmentRegion</key>
-	<string>English</string>
-  <key>CFBundleDocumentTypes</key>
-  <array>
-    <dict>
-      <key>CFBundleTypeExtensions</key>
-      <array>
-        <string>@CPACK_FILE_ASSOCIATION_EXTENSION@</string>
-      </array>
-      <key>CFBundleTypeName</key>
-      <string>@CPACK_FILE_ASSOCIATION_TYPE@</string>
-      <key>CFBundleTypeRole</key>
-      <string>Editor</string>
-    </dict>
-  </array>
-	<key>CFBundleExecutable</key>
-	<string>@CPACK_PACKAGE_FILE_NAME@</string>
-	<key>CFBundleGetInfoString</key>
-	<string>@CPACK_APPLE_GUI_INFO_STRING@</string>
-	<key>CFBundleIconFile</key>
-	<string>@CPACK_APPLE_GUI_ICON@</string>
-	<key>CFBundleIdentifier</key>
-	<string>@CPACK_APPLE_GUI_IDENTIFIER@</string>
-	<key>CFBundleInfoDictionaryVersion</key>
-	<string>6.0</string>
-	<key>CFBundleLongVersionString</key>
-	<string>@CPACK_APPLE_GUI_LONG_VERSION_STRING@</string>
-	<key>CFBundleName</key>
-	<string>@CPACK_APPLE_GUI_BUNDLE_NAME@</string>
-	<key>CFBundlePackageType</key>
-	<string>APPL</string>
-	<key>CFBundleShortVersionString</key>
-	<string>@CPACK_APPLE_GUI_SHORT_VERSION_STRING@</string>
-	<key>CFBundleSignature</key>
-	<string>????</string>
-	<key>CFBundleVersion</key>
-	<string>@CPACK_APPLE_GUI_BUNDLE_VERSION@</string>
-	<key>CSResourcesFileMapped</key>
-	<true/>
-	<key>LSRequiresCarbon</key>
-	<true/>
-	<key>NSHumanReadableCopyright</key>
-	<string>@CPACK_APPLE_GUI_COPYRIGHT@</string>
-</dict>
-</plist>
diff --git a/share/cmake-3.2/Modules/CPack.cmake b/share/cmake-3.2/Modules/CPack.cmake
deleted file mode 100644
index ce1536e..0000000
--- a/share/cmake-3.2/Modules/CPack.cmake
+++ /dev/null
@@ -1,618 +0,0 @@
-#.rst:
-# CPack
-# -----
-#
-# Build binary and source package installers.
-#
-# Variables common to all CPack generators
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The
-# CPack module generates binary and source installers in a variety of
-# formats using the cpack program.  Inclusion of the CPack module adds
-# two new targets to the resulting makefiles, package and
-# package_source, which build the binary and source installers,
-# respectively.  The generated binary installers contain everything
-# installed via CMake's INSTALL command (and the deprecated
-# INSTALL_FILES, INSTALL_PROGRAMS, and INSTALL_TARGETS commands).
-#
-# For certain kinds of binary installers (including the graphical
-# installers on Mac OS X and Windows), CPack generates installers that
-# allow users to select individual application components to install.
-# See CPackComponent module for that.
-#
-# The CPACK_GENERATOR variable has different meanings in different
-# contexts.  In your CMakeLists.txt file, CPACK_GENERATOR is a *list of
-# generators*: when run with no other arguments, CPack will iterate over
-# that list and produce one package for each generator.  In a
-# CPACK_PROJECT_CONFIG_FILE, though, CPACK_GENERATOR is a *string naming
-# a single generator*.  If you need per-cpack- generator logic to
-# control *other* cpack settings, then you need a
-# CPACK_PROJECT_CONFIG_FILE.
-#
-# The CMake source tree itself contains a CPACK_PROJECT_CONFIG_FILE.
-# See the top level file CMakeCPackOptions.cmake.in for an example.
-#
-# If set, the CPACK_PROJECT_CONFIG_FILE is included automatically on a
-# per-generator basis.  It only need contain overrides.
-#
-# Here's how it works:
-#
-# * cpack runs
-# * it includes CPackConfig.cmake
-# * it iterates over the generators listed in that file's
-#   CPACK_GENERATOR list variable (unless told to use just a
-#   specific one via -G on the command line...)
-# * foreach generator, it then
-#
-#   - sets CPACK_GENERATOR to the one currently being iterated
-#   - includes the CPACK_PROJECT_CONFIG_FILE
-#   - produces the package for that generator
-#
-# This is the key: For each generator listed in CPACK_GENERATOR in
-# CPackConfig.cmake, cpack will *reset* CPACK_GENERATOR internally to
-# *the one currently being used* and then include the
-# CPACK_PROJECT_CONFIG_FILE.
-#
-# Before including this CPack module in your CMakeLists.txt file, there
-# are a variety of variables that can be set to customize the resulting
-# installers.  The most commonly-used variables are:
-#
-# .. variable:: CPACK_PACKAGE_NAME
-#
-#  The name of the package (or application). If not specified, defaults to
-#  the project name.
-#
-# .. variable:: CPACK_PACKAGE_VENDOR
-#
-#  The name of the package vendor. (e.g., "Kitware").
-#
-# .. variable:: CPACK_PACKAGE_DIRECTORY
-#
-#  The directory in which CPack is doing its packaging. If it is not set
-#  then this will default (internally) to the build dir. This variable may
-#  be defined in CPack config file or from the cpack command line option
-#  "-B". If set the command line option override the value found in the
-#  config file.
-#
-# .. variable:: CPACK_PACKAGE_VERSION_MAJOR
-#
-#  Package major Version
-#
-# .. variable:: CPACK_PACKAGE_VERSION_MINOR
-#
-#  Package minor Version
-#
-# .. variable:: CPACK_PACKAGE_VERSION_PATCH
-#
-#  Package patch Version
-#
-# .. variable:: CPACK_PACKAGE_DESCRIPTION_FILE
-#
-#  A text file used to describe the project. Used, for example, the
-#  introduction screen of a CPack-generated Windows installer to describe
-#  the project.
-#
-# .. variable:: CPACK_PACKAGE_DESCRIPTION_SUMMARY
-#
-#  Short description of the project (only a few words).
-#
-# .. variable:: CPACK_PACKAGE_FILE_NAME
-#
-#  The name of the package file to generate, not including the
-#  extension. For example, cmake-2.6.1-Linux-i686.  The default value is::
-#
-#   ${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}.
-#
-# .. variable:: CPACK_PACKAGE_INSTALL_DIRECTORY
-#
-#  Installation directory on the target system. This may be used by some
-#  CPack generators like NSIS to create an installation directory e.g.,
-#  "CMake 2.5" below the installation prefix. All installed element will be
-#  put inside this directory.
-#
-# .. variable:: CPACK_PACKAGE_ICON
-#
-#  A branding image that will be displayed inside the installer (used by GUI
-#  installers).
-#
-# .. variable:: CPACK_PROJECT_CONFIG_FILE
-#
-#  CPack-time project CPack configuration file. This file included at cpack
-#  time, once per generator after CPack has set CPACK_GENERATOR to the
-#  actual generator being used. It allows per-generator setting of CPACK_*
-#  variables at cpack time.
-#
-# .. variable:: CPACK_RESOURCE_FILE_LICENSE
-#
-#  License to be embedded in the installer. It will typically be displayed
-#  to the user by the produced installer (often with an explicit "Accept"
-#  button, for graphical installers) prior to installation. This license
-#  file is NOT added to installed file but is used by some CPack generators
-#  like NSIS. If you want to install a license file (may be the same as this
-#  one) along with your project you must add an appropriate CMake INSTALL
-#  command in your CMakeLists.txt.
-#
-# .. variable:: CPACK_RESOURCE_FILE_README
-#
-#  ReadMe file to be embedded in the installer. It typically describes in
-#  some detail the purpose of the project during the installation. Not all
-#  CPack generators uses this file.
-#
-# .. variable:: CPACK_RESOURCE_FILE_WELCOME
-#
-#  Welcome file to be embedded in the installer. It welcomes users to this
-#  installer.  Typically used in the graphical installers on Windows and Mac
-#  OS X.
-#
-# .. variable:: CPACK_MONOLITHIC_INSTALL
-#
-#  Disables the component-based installation mechanism. When set the
-#  component specification is ignored and all installed items are put in a
-#  single "MONOLITHIC" package.  Some CPack generators do monolithic
-#  packaging by default and may be asked to do component packaging by
-#  setting CPACK_<GENNAME>_COMPONENT_INSTALL to 1/TRUE.
-#
-# .. variable:: CPACK_GENERATOR
-#
-#  List of CPack generators to use. If not specified, CPack will create a
-#  set of options CPACK_BINARY_<GENNAME> (e.g., CPACK_BINARY_NSIS) allowing
-#  the user to enable/disable individual generators. This variable may be
-#  used on the command line as well as in::
-#
-#   cpack -D CPACK_GENERATOR="ZIP;TGZ" /path/to/build/tree
-#
-# .. variable:: CPACK_OUTPUT_CONFIG_FILE
-#
-#  The name of the CPack binary configuration file. This file is the CPack
-#  configuration generated by the CPack module for binary
-#  installers. Defaults to CPackConfig.cmake.
-#
-# .. variable:: CPACK_PACKAGE_EXECUTABLES
-#
-#  Lists each of the executables and associated text label to be used to
-#  create Start Menu shortcuts. For example, setting this to the list
-#  ccmake;CMake will create a shortcut named "CMake" that will execute the
-#  installed executable ccmake. Not all CPack generators use it (at least
-#  NSIS, WIX and OSXX11 do).
-#
-# .. variable:: CPACK_STRIP_FILES
-#
-#  List of files to be stripped. Starting with CMake 2.6.0 CPACK_STRIP_FILES
-#  will be a boolean variable which enables stripping of all files (a list
-#  of files evaluates to TRUE in CMake, so this change is compatible).
-#
-# The following CPack variables are specific to source packages, and
-# will not affect binary packages:
-#
-# .. variable:: CPACK_SOURCE_PACKAGE_FILE_NAME
-#
-#  The name of the source package. For example cmake-2.6.1.
-#
-# .. variable:: CPACK_SOURCE_STRIP_FILES
-#
-#  List of files in the source tree that will be stripped. Starting with
-#  CMake 2.6.0 CPACK_SOURCE_STRIP_FILES will be a boolean variable which
-#  enables stripping of all files (a list of files evaluates to TRUE in
-#  CMake, so this change is compatible).
-#
-# .. variable:: CPACK_SOURCE_GENERATOR
-#
-#  List of generators used for the source packages. As with CPACK_GENERATOR,
-#  if this is not specified then CPack will create a set of options (e.g.,
-#  CPACK_SOURCE_ZIP) allowing users to select which packages will be
-#  generated.
-#
-# .. variable:: CPACK_SOURCE_OUTPUT_CONFIG_FILE
-#
-#  The name of the CPack source configuration file. This file is the CPack
-#  configuration generated by the CPack module for source
-#  installers. Defaults to CPackSourceConfig.cmake.
-#
-# .. variable:: CPACK_SOURCE_IGNORE_FILES
-#
-#  Pattern of files in the source tree that won't be packaged when building
-#  a source package. This is a list of regular expression patterns (that
-#  must be properly escaped), e.g.,
-#  /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.*
-#
-# The following variables are for advanced uses of CPack:
-#
-# .. variable:: CPACK_CMAKE_GENERATOR
-#
-#  What CMake generator should be used if the project is CMake
-#  project. Defaults to the value of CMAKE_GENERATOR few users will want to
-#  change this setting.
-#
-# .. variable:: CPACK_INSTALL_CMAKE_PROJECTS
-#
-#  List of four values that specify what project to install. The four values
-#  are: Build directory, Project Name, Project Component, Directory. If
-#  omitted, CPack will build an installer that installers everything.
-#
-# .. variable:: CPACK_SYSTEM_NAME
-#
-#  System name, defaults to the value of ${CMAKE_SYSTEM_NAME}.
-#
-# .. variable:: CPACK_PACKAGE_VERSION
-#
-#  Package full version, used internally. By default, this is built from
-#  CPACK_PACKAGE_VERSION_MAJOR, CPACK_PACKAGE_VERSION_MINOR, and
-#  CPACK_PACKAGE_VERSION_PATCH.
-#
-# .. variable:: CPACK_TOPLEVEL_TAG
-#
-#  Directory for the installed files.
-#
-# .. variable:: CPACK_INSTALL_COMMANDS
-#
-#  Extra commands to install components.
-#
-# .. variable:: CPACK_INSTALLED_DIRECTORIES
-#
-#  Extra directories to install.
-#
-# .. variable:: CPACK_PACKAGE_INSTALL_REGISTRY_KEY
-#
-#  Registry key used when installing this project. This is only used by
-#  installer for Windows.  The default value is based on the installation
-#  directory.
-#
-# .. variable:: CPACK_CREATE_DESKTOP_LINKS
-#
-#  List of desktop links to create.
-#  Each desktop link requires a corresponding start menu shortcut
-#  as created by :variable:`CPACK_PACKAGE_EXECUTABLES`.
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Define this var in order to avoid (or warn) concerning multiple inclusion
-if(CPack_CMake_INCLUDED)
-  message(WARNING "CPack.cmake has already been included!!")
-else()
-  set(CPack_CMake_INCLUDED 1)
-endif()
-
-# Pick a configuration file
-set(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
-if(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
-  set(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
-endif()
-set(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
-if(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
-  set(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
-endif()
-
-# Backward compatibility
-# Include CPackComponent macros if it has not already been included before.
-include(CPackComponent)
-
-# Macro for setting values if a user did not overwrite them
-macro(cpack_set_if_not_set name value)
-  if(NOT DEFINED "${name}")
-    set(${name} "${value}")
-  endif()
-endmacro()
-
-# cpack_encode_variables - Macro to encode variables for the configuration file
-# find any variable that starts with CPACK and create a variable
-# _CPACK_OTHER_VARIABLES_ that contains SET commands for
-# each cpack variable.  _CPACK_OTHER_VARIABLES_ is then
-# used as an @ replacment in configure_file for the CPackConfig.
-macro(cpack_encode_variables)
-  set(_CPACK_OTHER_VARIABLES_)
-  get_cmake_property(res VARIABLES)
-  foreach(var ${res})
-    if("xxx${var}" MATCHES "xxxCPACK")
-      set(_CPACK_OTHER_VARIABLES_
-        "${_CPACK_OTHER_VARIABLES_}\nSET(${var} \"${${var}}\")")
-      endif()
-  endforeach()
-endmacro()
-
-# Set the package name
-cpack_set_if_not_set(CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
-cpack_set_if_not_set(CPACK_PACKAGE_VERSION_MAJOR "0")
-cpack_set_if_not_set(CPACK_PACKAGE_VERSION_MINOR "1")
-cpack_set_if_not_set(CPACK_PACKAGE_VERSION_PATCH "1")
-cpack_set_if_not_set(CPACK_PACKAGE_VERSION
-  "${CPACK_PACKAGE_VERSION_MAJOR}.${CPACK_PACKAGE_VERSION_MINOR}.${CPACK_PACKAGE_VERSION_PATCH}")
-cpack_set_if_not_set(CPACK_PACKAGE_VENDOR "Humanity")
-cpack_set_if_not_set(CPACK_PACKAGE_DESCRIPTION_SUMMARY
-  "${CMAKE_PROJECT_NAME} built using CMake")
-
-cpack_set_if_not_set(CPACK_PACKAGE_DESCRIPTION_FILE
-  "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt")
-cpack_set_if_not_set(CPACK_RESOURCE_FILE_LICENSE
-  "${CMAKE_ROOT}/Templates/CPack.GenericLicense.txt")
-cpack_set_if_not_set(CPACK_RESOURCE_FILE_README
-  "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt")
-cpack_set_if_not_set(CPACK_RESOURCE_FILE_WELCOME
-  "${CMAKE_ROOT}/Templates/CPack.GenericWelcome.txt")
-
-cpack_set_if_not_set(CPACK_MODULE_PATH "${CMAKE_MODULE_PATH}")
-
-if(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL)
-  set(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)
-endif()
-
-if(CPACK_NSIS_MODIFY_PATH)
-  set(CPACK_NSIS_MODIFY_PATH ON)
-endif()
-
-set(__cpack_system_name ${CMAKE_SYSTEM_NAME})
-if(__cpack_system_name MATCHES "Windows")
-  if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-    set(__cpack_system_name win64)
-  else()
-    set(__cpack_system_name win32)
-  endif()
-endif()
-cpack_set_if_not_set(CPACK_SYSTEM_NAME "${__cpack_system_name}")
-
-# Root dir: default value should be the string literal "$PROGRAMFILES"
-# for backwards compatibility. Projects may set this value to anything.
-# When creating 64 bit binaries we set the default value to "$PROGRAMFILES64"
-if("x${__cpack_system_name}" STREQUAL "xwin64")
-  set(__cpack_root_default "$PROGRAMFILES64")
-else()
-  set(__cpack_root_default "$PROGRAMFILES")
-endif()
-cpack_set_if_not_set(CPACK_NSIS_INSTALL_ROOT "${__cpack_root_default}")
-
-# <project>-<major>.<minor>.<patch>-<release>-<platform>.<pkgtype>
-cpack_set_if_not_set(CPACK_PACKAGE_FILE_NAME
-  "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}")
-cpack_set_if_not_set(CPACK_PACKAGE_INSTALL_DIRECTORY
-  "${CPACK_PACKAGE_NAME} ${CPACK_PACKAGE_VERSION}")
-cpack_set_if_not_set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY
-  "${CPACK_PACKAGE_INSTALL_DIRECTORY}")
-cpack_set_if_not_set(CPACK_PACKAGE_DEFAULT_LOCATION "/")
-cpack_set_if_not_set(CPACK_PACKAGE_RELOCATABLE "true")
-
-# always force to exactly "true" or "false" for CPack.Info.plist.in:
-if(CPACK_PACKAGE_RELOCATABLE)
-  set(CPACK_PACKAGE_RELOCATABLE "true")
-else()
-  set(CPACK_PACKAGE_RELOCATABLE "false")
-endif()
-
-macro(cpack_check_file_exists file description)
-  if(NOT EXISTS "${file}")
-    message(SEND_ERROR "CPack ${description} file: \"${file}\" could not be found.")
-  endif()
-endmacro()
-
-cpack_check_file_exists("${CPACK_PACKAGE_DESCRIPTION_FILE}" "package description")
-cpack_check_file_exists("${CPACK_RESOURCE_FILE_LICENSE}"    "license resource")
-cpack_check_file_exists("${CPACK_RESOURCE_FILE_README}"     "readme resource")
-cpack_check_file_exists("${CPACK_RESOURCE_FILE_WELCOME}"    "welcome resource")
-
-macro(cpack_optional_append _list _cond _item)
-  if(${_cond})
-    set(${_list} ${${_list}} ${_item})
-  endif()
-endmacro()
-
-#.rst:
-# .. variable:: CPACK_BINARY_<GENNAME>
-#
-#  CPack generated options for binary generators. The CPack.cmake module
-#  generates (when CPACK_GENERATOR is not set) a set of CMake options (see
-#  CMake option command) which may then be used to select the CPack
-#  generator(s) to be used when launching the package target.
-#
-#  Provide options to choose generators we might check here if the required
-#  tools for the generates exist and set the defaults according to the results
-if(NOT CPACK_GENERATOR)
-  if(UNIX)
-    if(CYGWIN)
-      option(CPACK_BINARY_CYGWIN "Enable to build Cygwin binary packages" ON)
-    else()
-      if(APPLE)
-        option(CPACK_BINARY_BUNDLE       "Enable to build OSX bundles"      OFF)
-        option(CPACK_BINARY_DRAGNDROP    "Enable to build OSX Drag And Drop package" OFF)
-        option(CPACK_BINARY_OSXX11       "Enable to build OSX X11 packages"      OFF)
-        option(CPACK_BINARY_PACKAGEMAKER "Enable to build PackageMaker packages" OFF)
-      else()
-        option(CPACK_BINARY_TZ  "Enable to build TZ packages"     ON)
-      endif()
-      option(CPACK_BINARY_DEB  "Enable to build Debian packages"  OFF)
-      option(CPACK_BINARY_NSIS "Enable to build NSIS packages"    OFF)
-      option(CPACK_BINARY_RPM  "Enable to build RPM packages"     OFF)
-      option(CPACK_BINARY_STGZ "Enable to build STGZ packages"    ON)
-      option(CPACK_BINARY_TBZ2 "Enable to build TBZ2 packages"    OFF)
-      option(CPACK_BINARY_TGZ  "Enable to build TGZ packages"     ON)
-      option(CPACK_BINARY_TXZ  "Enable to build TXZ packages"     OFF)
-    endif()
-  else()
-    option(CPACK_BINARY_7Z   "Enable to build 7-Zip packages" OFF)
-    option(CPACK_BINARY_NSIS "Enable to build NSIS packages" ON)
-    option(CPACK_BINARY_WIX  "Enable to build WiX packages" OFF)
-    option(CPACK_BINARY_ZIP  "Enable to build ZIP packages" OFF)
-  endif()
-  option(CPACK_BINARY_IFW "Enable to build IFW packages" OFF)
-
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_7Z           7Z)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_BUNDLE       Bundle)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_CYGWIN       CygwinBinary)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_DEB          DEB)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_DRAGNDROP    DragNDrop)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_IFW          IFW)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_NSIS         NSIS)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_OSXX11       OSXX11)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_PACKAGEMAKER PackageMaker)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_RPM          RPM)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_STGZ         STGZ)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TBZ2         TBZ2)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TGZ          TGZ)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TXZ          TXZ)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TZ           TZ)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_WIX          WIX)
-  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_ZIP          ZIP)
-
-endif()
-
-# Provide options to choose source generators
-if(NOT CPACK_SOURCE_GENERATOR)
-  if(UNIX)
-    if(CYGWIN)
-      option(CPACK_SOURCE_CYGWIN "Enable to build Cygwin source packages" ON)
-    else()
-      option(CPACK_SOURCE_TBZ2 "Enable to build TBZ2 source packages" ON)
-      option(CPACK_SOURCE_TGZ  "Enable to build TGZ source packages"  ON)
-      option(CPACK_SOURCE_TXZ  "Enable to build TXZ source packages"  ON)
-      option(CPACK_SOURCE_TZ   "Enable to build TZ source packages"   ON)
-      option(CPACK_SOURCE_ZIP  "Enable to build ZIP source packages"  OFF)
-    endif()
-  else()
-    option(CPACK_SOURCE_7Z  "Enable to build 7-Zip source packages" ON)
-    option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" ON)
-  endif()
-
-  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_7Z      7Z)
-  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_CYGWIN  CygwinSource)
-  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TBZ2    TBZ2)
-  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TGZ     TGZ)
-  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TXZ     TXZ)
-  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TZ      TZ)
-  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_ZIP     ZIP)
-endif()
-
-# mark the above options as advanced
-mark_as_advanced(
-  CPACK_BINARY_7Z
-  CPACK_BINARY_BUNDLE
-  CPACK_BINARY_CYGWIN
-  CPACK_BINARY_DEB
-  CPACK_BINARY_DRAGNDROP
-  CPACK_BINARY_IFW
-  CPACK_BINARY_NSIS
-  CPACK_BINARY_OSXX11
-  CPACK_BINARY_PACKAGEMAKER
-  CPACK_BINARY_RPM
-  CPACK_BINARY_STGZ
-  CPACK_BINARY_TBZ2
-  CPACK_BINARY_TGZ
-  CPACK_BINARY_TXZ
-  CPACK_BINARY_TZ
-  CPACK_BINARY_WIX
-  CPACK_BINARY_ZIP
-  CPACK_SOURCE_7Z
-  CPACK_SOURCE_CYGWIN
-  CPACK_SOURCE_TBZ2
-  CPACK_SOURCE_TGZ
-  CPACK_SOURCE_TXZ
-  CPACK_SOURCE_TZ
-  CPACK_SOURCE_ZIP
-  )
-
-# Set some other variables
-cpack_set_if_not_set(CPACK_INSTALL_CMAKE_PROJECTS
-  "${CMAKE_BINARY_DIR};${CMAKE_PROJECT_NAME};ALL;/")
-cpack_set_if_not_set(CPACK_CMAKE_GENERATOR "${CMAKE_GENERATOR}")
-cpack_set_if_not_set(CPACK_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}")
-# if the user has set CPACK_NSIS_DISPLAY_NAME remember it
-if(DEFINED CPACK_NSIS_DISPLAY_NAME)
-  set(CPACK_NSIS_DISPLAY_NAME_SET TRUE)
-endif()
-# if the user has set CPACK_NSIS_DISPLAY
-# explicitly, then use that as the default
-# value of CPACK_NSIS_PACKAGE_NAME  instead
-# of CPACK_PACKAGE_INSTALL_DIRECTORY
-cpack_set_if_not_set(CPACK_NSIS_DISPLAY_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}")
-
-if(CPACK_NSIS_DISPLAY_NAME_SET)
-  string(REPLACE "\\" "\\\\"
-    _NSIS_DISPLAY_NAME_TMP  "${CPACK_NSIS_DISPLAY_NAME}")
-  cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${_NSIS_DISPLAY_NAME_TMP}")
-else()
-  cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}")
-endif()
-
-cpack_set_if_not_set(CPACK_OUTPUT_CONFIG_FILE
-  "${CMAKE_BINARY_DIR}/CPackConfig.cmake")
-
-cpack_set_if_not_set(CPACK_SOURCE_OUTPUT_CONFIG_FILE
-  "${CMAKE_BINARY_DIR}/CPackSourceConfig.cmake")
-
-cpack_set_if_not_set(CPACK_SET_DESTDIR OFF)
-cpack_set_if_not_set(CPACK_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}")
-
-cpack_set_if_not_set(CPACK_NSIS_INSTALLER_ICON_CODE "")
-cpack_set_if_not_set(CPACK_NSIS_INSTALLER_MUI_ICON_CODE "")
-
-# WiX specific variables
-cpack_set_if_not_set(CPACK_WIX_SIZEOF_VOID_P "${CMAKE_SIZEOF_VOID_P}")
-
-# set sysroot so SDK tools can be used
-if(CMAKE_OSX_SYSROOT)
-  cpack_set_if_not_set(CPACK_OSX_SYSROOT "${CMAKE_OSX_SYSROOT}")
-endif()
-
-if(DEFINED CPACK_COMPONENTS_ALL)
-  if(CPACK_MONOLITHIC_INSTALL)
-    message("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.")
-    set(CPACK_COMPONENTS_ALL)
-  else()
-    # The user has provided the set of components to be installed as
-    # part of a component-based installation; trust her.
-    set(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE)
-  endif()
-else()
-  # If the user has not specifically requested a monolithic installer
-  # but has specified components in various "install" commands, tell
-  # CPack about those components.
-  if(NOT CPACK_MONOLITHIC_INSTALL)
-    get_cmake_property(CPACK_COMPONENTS_ALL COMPONENTS)
-    list(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN)
-    if(CPACK_COMPONENTS_LEN EQUAL 1)
-      # Only one component: this is not a component-based installation
-      # (at least, it isn't a component-based installation, but may
-      # become one later if the user uses the cpack_add_* commands).
-      set(CPACK_COMPONENTS_ALL)
-    endif()
-    set(CPACK_COMPONENTS_LEN)
-  endif()
-endif()
-
-# CMake always generates a component named "Unspecified", which is
-# used to install everything that doesn't have an explicitly-provided
-# component. Since these files should always be installed, we'll make
-# them hidden and required.
-set(CPACK_COMPONENT_UNSPECIFIED_HIDDEN TRUE)
-set(CPACK_COMPONENT_UNSPECIFIED_REQUIRED TRUE)
-
-cpack_encode_variables()
-configure_file("${cpack_input_file}" "${CPACK_OUTPUT_CONFIG_FILE}" @ONLY)
-
-# Generate source file
-cpack_set_if_not_set(CPACK_SOURCE_INSTALLED_DIRECTORIES
-  "${CMAKE_SOURCE_DIR};/")
-cpack_set_if_not_set(CPACK_SOURCE_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}-Source")
-cpack_set_if_not_set(CPACK_SOURCE_PACKAGE_FILE_NAME
-  "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-Source")
-cpack_set_if_not_set(CPACK_SOURCE_IGNORE_FILES
-  "/CVS/;/\\\\\\\\.svn/;/\\\\\\\\.bzr/;/\\\\\\\\.hg/;/\\\\\\\\.git/;\\\\\\\\.swp$;\\\\\\\\.#;/#")
-set(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}")
-set(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}")
-set(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}")
-set(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}")
-set(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}")
-set(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}")
-set(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}")
-
-cpack_encode_variables()
-configure_file("${cpack_source_input_file}"
-  "${CPACK_SOURCE_OUTPUT_CONFIG_FILE}" @ONLY)
diff --git a/share/cmake-3.2/Modules/CPackBundle.cmake b/share/cmake-3.2/Modules/CPackBundle.cmake
deleted file mode 100644
index d26a0b3..0000000
--- a/share/cmake-3.2/Modules/CPackBundle.cmake
+++ /dev/null
@@ -1,75 +0,0 @@
-#.rst:
-# CPackBundle
-# -----------
-#
-# CPack Bundle generator (Mac OS X) specific options
-#
-# Variables specific to CPack Bundle generator
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# Installers built on Mac OS X using the Bundle generator use the
-# aforementioned DragNDrop (CPACK_DMG_xxx) variables, plus the following
-# Bundle-specific parameters (CPACK_BUNDLE_xxx).
-#
-# .. variable:: CPACK_BUNDLE_NAME
-#
-#  The name of the generated bundle. This appears in the OSX finder as the
-#  bundle name. Required.
-#
-# .. variable:: CPACK_BUNDLE_PLIST
-#
-#  Path to an OSX plist file that will be used for the generated bundle. This
-#  assumes that the caller has generated or specified their own Info.plist
-#  file. Required.
-#
-# .. variable:: CPACK_BUNDLE_ICON
-#
-#  Path to an OSX icon file that will be used as the icon for the generated
-#  bundle. This is the icon that appears in the OSX finder for the bundle, and
-#  in the OSX dock when the bundle is opened.  Required.
-#
-# .. variable:: CPACK_BUNDLE_STARTUP_COMMAND
-#
-#  Path to a startup script. This is a path to an executable or script that
-#  will be run whenever an end-user double-clicks the generated bundle in the
-#  OSX Finder. Optional.
-#
-# .. variable:: CPACK_BUNDLE_APPLE_CERT_APP
-#
-#  The name of your Apple supplied code signing certificate for the application.
-#  The name usually takes the form "Developer ID Application: [Name]" or
-#  "3rd Party Mac Developer Application: [Name]". If this variable is not set
-#  the application will not be signed.
-#
-# .. variable:: CPACK_BUNDLE_APPLE_ENTITLEMENTS
-#
-#  The name of the plist file that contains your apple entitlements for sandboxing
-#  your application. This file is required for submission to the Mac App Store.
-#
-# .. variable:: CPACK_BUNDLE_APPLE_CODESIGN_FILES
-#
-#  A list of additional files that you wish to be signed. You do not need to
-#  list the main application folder, or the main executable. You should
-#  list any frameworks and plugins that are included in your app bundle.
-#
-# .. variable:: CPACK_COMMAND_CODESIGN
-#
-#  Path to the codesign(1) command used to sign applications with an
-#  Apple cert. This variable can be used to override the automatically
-#  detected command (or specify its location if the auto-detection fails
-#  to find it.)
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#Bundle Generator specific code should be put here
diff --git a/share/cmake-3.2/Modules/CPackComponent.cmake b/share/cmake-3.2/Modules/CPackComponent.cmake
deleted file mode 100644
index 573e5aa..0000000
--- a/share/cmake-3.2/Modules/CPackComponent.cmake
+++ /dev/null
@@ -1,539 +0,0 @@
-#.rst:
-# CPackComponent
-# --------------
-#
-# Build binary and source package installers
-#
-# Variables concerning CPack Components
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The CPackComponent module is the module which handles the component
-# part of CPack.  See CPack module for general information about CPack.
-#
-# For certain kinds of binary installers (including the graphical
-# installers on Mac OS X and Windows), CPack generates installers that
-# allow users to select individual application components to install.
-# The contents of each of the components are identified by the COMPONENT
-# argument of CMake's INSTALL command.  These components can be
-# annotated with user-friendly names and descriptions, inter-component
-# dependencies, etc., and grouped in various ways to customize the
-# resulting installer.  See the cpack_add_* commands, described below,
-# for more information about component-specific installations.
-#
-# Component-specific installation allows users to select specific sets
-# of components to install during the install process.  Installation
-# components are identified by the COMPONENT argument of CMake's INSTALL
-# commands, and should be further described by the following CPack
-# commands:
-#
-# .. variable:: CPACK_COMPONENTS_ALL
-#
-#  The list of component to install.
-#
-#  The default value of this variable is computed by CPack and contains all
-#  components defined by the project.  The user may set it to only include the
-#  specified components.
-#
-# .. variable:: CPACK_<GENNAME>_COMPONENT_INSTALL
-#
-#  Enable/Disable component install for CPack generator <GENNAME>.
-#
-#  Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy
-#  default behavior.  e.g.  RPM builds monolithic whereas NSIS builds
-#  component.  One can change the default behavior by setting this variable to
-#  0/1 or OFF/ON.
-#
-# .. variable:: CPACK_COMPONENTS_GROUPING
-#
-#  Specify how components are grouped for multi-package component-aware CPack
-#  generators.
-#
-#  Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates
-#  several packages files when asked for component packaging.  They group
-#  the component differently depending on the value of this variable:
-#
-#  * ONE_PER_GROUP (default): creates one package file per component group
-#  * ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) component
-#  * IGNORE : creates one package per component, i.e. IGNORE component group
-#
-#  One can specify different grouping for different CPack generator by
-#  using a CPACK_PROJECT_CONFIG_FILE.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_DISPLAY_NAME
-#
-#  The name to be displayed for a component.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_DESCRIPTION
-#
-#  The description of a component.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_GROUP
-#
-#  The group of a component.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_DEPENDS
-#
-#  The dependencies (list of components) on which this component depends.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_REQUIRED
-#
-#  True is this component is required.
-#
-# .. command:: cpack_add_component
-#
-# Describes a CPack installation
-# component named by the COMPONENT argument to a CMake INSTALL command.
-#
-# ::
-#
-#   cpack_add_component(compname
-#                       [DISPLAY_NAME name]
-#                       [DESCRIPTION description]
-#                       [HIDDEN | REQUIRED | DISABLED ]
-#                       [GROUP group]
-#                       [DEPENDS comp1 comp2 ... ]
-#                       [INSTALL_TYPES type1 type2 ... ]
-#                       [DOWNLOADED]
-#                       [ARCHIVE_FILE filename])
-#
-#
-#
-# The cmake_add_component command describes an installation component,
-# which the user can opt to install or remove as part of the graphical
-# installation process.  compname is the name of the component, as
-# provided to the COMPONENT argument of one or more CMake INSTALL
-# commands.
-#
-# DISPLAY_NAME is the displayed name of the component, used in graphical
-# installers to display the component name.  This value can be any
-# string.
-#
-# DESCRIPTION is an extended description of the component, used in
-# graphical installers to give the user additional information about the
-# component.  Descriptions can span multiple lines using ``\n`` as the
-# line separator.  Typically, these descriptions should be no more than
-# a few lines long.
-#
-# HIDDEN indicates that this component will be hidden in the graphical
-# installer, so that the user cannot directly change whether it is
-# installed or not.
-#
-# REQUIRED indicates that this component is required, and therefore will
-# always be installed.  It will be visible in the graphical installer,
-# but it cannot be unselected.  (Typically, required components are
-# shown greyed out).
-#
-# DISABLED indicates that this component should be disabled (unselected)
-# by default.  The user is free to select this component for
-# installation, unless it is also HIDDEN.
-#
-# DEPENDS lists the components on which this component depends.  If this
-# component is selected, then each of the components listed must also be
-# selected.  The dependency information is encoded within the installer
-# itself, so that users cannot install inconsistent sets of components.
-#
-# GROUP names the component group of which this component is a part.  If
-# not provided, the component will be a standalone component, not part
-# of any component group.  Component groups are described with the
-# cpack_add_component_group command, detailed below.
-#
-# INSTALL_TYPES lists the installation types of which this component is
-# a part.  When one of these installations types is selected, this
-# component will automatically be selected.  Installation types are
-# described with the cpack_add_install_type command, detailed below.
-#
-# DOWNLOADED indicates that this component should be downloaded
-# on-the-fly by the installer, rather than packaged in with the
-# installer itself.  For more information, see the
-# cpack_configure_downloads command.
-#
-# ARCHIVE_FILE provides a name for the archive file created by CPack to
-# be used for downloaded components.  If not supplied, CPack will create
-# a file with some name based on CPACK_PACKAGE_FILE_NAME and the name of
-# the component.  See cpack_configure_downloads for more information.
-#
-# .. command:: cpack_add_component_group
-#
-# Describes a group of related CPack installation components.
-#
-# ::
-#
-#   cpack_add_component_group(groupname
-#                            [DISPLAY_NAME name]
-#                            [DESCRIPTION description]
-#                            [PARENT_GROUP parent]
-#                            [EXPANDED]
-#                            [BOLD_TITLE])
-#
-#
-#
-# The cpack_add_component_group describes a group of installation
-# components, which will be placed together within the listing of
-# options.  Typically, component groups allow the user to
-# select/deselect all of the components within a single group via a
-# single group-level option.  Use component groups to reduce the
-# complexity of installers with many options.  groupname is an arbitrary
-# name used to identify the group in the GROUP argument of the
-# cpack_add_component command, which is used to place a component in a
-# group.  The name of the group must not conflict with the name of any
-# component.
-#
-# DISPLAY_NAME is the displayed name of the component group, used in
-# graphical installers to display the component group name.  This value
-# can be any string.
-#
-# DESCRIPTION is an extended description of the component group, used in
-# graphical installers to give the user additional information about the
-# components within that group.  Descriptions can span multiple lines
-# using ``\n`` as the line separator.  Typically, these descriptions
-# should be no more than a few lines long.
-#
-# PARENT_GROUP, if supplied, names the parent group of this group.
-# Parent groups are used to establish a hierarchy of groups, providing
-# an arbitrary hierarchy of groups.
-#
-# EXPANDED indicates that, by default, the group should show up as
-# "expanded", so that the user immediately sees all of the components
-# within the group.  Otherwise, the group will initially show up as a
-# single entry.
-#
-# BOLD_TITLE indicates that the group title should appear in bold, to
-# call the user's attention to the group.
-#
-# .. command:: cpack_add_install_type
-#
-# Add a new installation type containing
-# a set of predefined component selections to the graphical installer.
-#
-# ::
-#
-#   cpack_add_install_type(typename
-#                          [DISPLAY_NAME name])
-#
-#
-#
-# The cpack_add_install_type command identifies a set of preselected
-# components that represents a common use case for an application.  For
-# example, a "Developer" install type might include an application along
-# with its header and library files, while an "End user" install type
-# might just include the application's executable.  Each component
-# identifies itself with one or more install types via the INSTALL_TYPES
-# argument to cpack_add_component.
-#
-# DISPLAY_NAME is the displayed name of the install type, which will
-# typically show up in a drop-down box within a graphical installer.
-# This value can be any string.
-#
-# .. command:: cpack_configure_downloads
-#
-# Configure CPack to download
-# selected components on-the-fly as part of the installation process.
-#
-# ::
-#
-#   cpack_configure_downloads(site
-#                             [UPLOAD_DIRECTORY dirname]
-#                             [ALL]
-#                             [ADD_REMOVE|NO_ADD_REMOVE])
-#
-#
-#
-# The cpack_configure_downloads command configures installation-time
-# downloads of selected components.  For each downloadable component,
-# CPack will create an archive containing the contents of that
-# component, which should be uploaded to the given site.  When the user
-# selects that component for installation, the installer will download
-# and extract the component in place.  This feature is useful for
-# creating small installers that only download the requested components,
-# saving bandwidth.  Additionally, the installers are small enough that
-# they will be installed as part of the normal installation process, and
-# the "Change" button in Windows Add/Remove Programs control panel will
-# allow one to add or remove parts of the application after the original
-# installation.  On Windows, the downloaded-components functionality
-# requires the ZipDLL plug-in for NSIS, available at:
-#
-# ::
-#
-#   http://nsis.sourceforge.net/ZipDLL_plug-in
-#
-#
-#
-# On Mac OS X, installers that download components on-the-fly can only
-# be built and installed on system using Mac OS X 10.5 or later.
-#
-# The site argument is a URL where the archives for downloadable
-# components will reside, e.g.,
-# http://www.cmake.org/files/2.6.1/installer/ All of the archives
-# produced by CPack should be uploaded to that location.
-#
-# UPLOAD_DIRECTORY is the local directory where CPack will create the
-# various archives for each of the components.  The contents of this
-# directory should be uploaded to a location accessible by the URL given
-# in the site argument.  If omitted, CPack will use the directory
-# CPackUploads inside the CMake binary directory to store the generated
-# archives.
-#
-# The ALL flag indicates that all components be downloaded.  Otherwise,
-# only those components explicitly marked as DOWNLOADED or that have a
-# specified ARCHIVE_FILE will be downloaded.  Additionally, the ALL
-# option implies ADD_REMOVE (unless NO_ADD_REMOVE is specified).
-#
-# ADD_REMOVE indicates that CPack should install a copy of the installer
-# that can be called from Windows' Add/Remove Programs dialog (via the
-# "Modify" button) to change the set of installed components.
-# NO_ADD_REMOVE turns off this behavior.  This option is ignored on Mac
-# OS X.
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Define var in order to avoid multiple inclusion
-if(NOT CPackComponent_CMake_INCLUDED)
-set(CPackComponent_CMake_INCLUDED 1)
-
-# Argument-parsing macro from http://www.cmake.org/Wiki/CMakeMacroParseArguments
-macro(cpack_parse_arguments prefix arg_names option_names)
-  set(${prefix}_DEFAULT_ARGS)
-  foreach(arg_name ${arg_names})
-    set(${prefix}_${arg_name})
-  endforeach()
-  foreach(option ${option_names})
-    set(${prefix}_${option} FALSE)
-  endforeach()
-
-  set(current_arg_name DEFAULT_ARGS)
-  set(current_arg_list)
-  foreach(arg ${ARGN})
-    set(larg_names ${arg_names})
-    list(FIND larg_names "${arg}" is_arg_name)
-    if (is_arg_name GREATER -1)
-      set(${prefix}_${current_arg_name} ${current_arg_list})
-      set(current_arg_name ${arg})
-      set(current_arg_list)
-    else ()
-      set(loption_names ${option_names})
-      list(FIND loption_names "${arg}" is_option)
-      if (is_option GREATER -1)
-        set(${prefix}_${arg} TRUE)
-      else ()
-        set(current_arg_list ${current_arg_list} ${arg})
-      endif ()
-    endif ()
-  endforeach()
-  set(${prefix}_${current_arg_name} ${current_arg_list})
-endmacro()
-
-# Macro that appends a SET command for the given variable name (var)
-# to the macro named strvar, but only if the variable named "var"
-# has been defined. The string will eventually be appended to a CPack
-# configuration file.
-macro(cpack_append_variable_set_command var strvar)
-  if (DEFINED ${var})
-    set(${strvar} "${${strvar}}set(${var}")
-    foreach(APPENDVAL ${${var}})
-      set(${strvar} "${${strvar}} ${APPENDVAL}")
-    endforeach()
-    set(${strvar} "${${strvar}})\n")
-  endif ()
-endmacro()
-
-# Macro that appends a SET command for the given variable name (var)
-# to the macro named strvar, but only if the variable named "var"
-# has been defined and is a string. The string will eventually be
-# appended to a CPack configuration file.
-macro(cpack_append_string_variable_set_command var strvar)
-  if (DEFINED ${var})
-    list(LENGTH ${var} CPACK_APP_VALUE_LEN)
-    if(${CPACK_APP_VALUE_LEN} EQUAL 1)
-      set(${strvar} "${${strvar}}set(${var} \"${${var}}\")\n")
-    endif()
-  endif ()
-endmacro()
-
-# Macro that appends a SET command for the given variable name (var)
-# to the macro named strvar, but only if the variable named "var"
-# has been set to true. The string will eventually be
-# appended to a CPack configuration file.
-macro(cpack_append_option_set_command var strvar)
-  if (${var})
-    list(LENGTH ${var} CPACK_APP_VALUE_LEN)
-    if(${CPACK_APP_VALUE_LEN} EQUAL 1)
-      set(${strvar} "${${strvar}}set(${var} TRUE)\n")
-    endif()
-  endif ()
-endmacro()
-
-# Macro that adds a component to the CPack installer
-macro(cpack_add_component compname)
-  string(TOUPPER ${compname} _CPACK_ADDCOMP_UNAME)
-  cpack_parse_arguments(CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}
-    "DISPLAY_NAME;DESCRIPTION;GROUP;DEPENDS;INSTALL_TYPES;ARCHIVE_FILE"
-    "HIDDEN;REQUIRED;DISABLED;DOWNLOADED"
-    ${ARGN}
-    )
-
-  if (CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DOWNLOADED)
-    set(_CPACK_ADDCOMP_STR "\n# Configuration for downloaded component \"${compname}\"\n")
-  else ()
-    set(_CPACK_ADDCOMP_STR "\n# Configuration for component \"${compname}\"\n")
-  endif ()
-
-  if(NOT CPACK_MONOLITHIC_INSTALL)
-    # If the user didn't set CPACK_COMPONENTS_ALL explicitly, update the
-    # value of CPACK_COMPONENTS_ALL in the configuration file. This will
-    # take care of any components that have been added after the CPack
-    # moduled was included.
-    if(NOT CPACK_COMPONENTS_ALL_SET_BY_USER)
-      get_cmake_property(_CPACK_ADDCOMP_COMPONENTS COMPONENTS)
-      set(_CPACK_ADDCOMP_STR "${_CPACK_ADDCOMP_STR}\nSET(CPACK_COMPONENTS_ALL")
-      foreach(COMP ${_CPACK_ADDCOMP_COMPONENTS})
-       set(_CPACK_ADDCOMP_STR "${_CPACK_ADDCOMP_STR} ${COMP}")
-      endforeach()
-      set(_CPACK_ADDCOMP_STR "${_CPACK_ADDCOMP_STR})\n")
-    endif()
-  endif()
-
-  cpack_append_string_variable_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DISPLAY_NAME
-    _CPACK_ADDCOMP_STR)
-  cpack_append_string_variable_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DESCRIPTION
-    _CPACK_ADDCOMP_STR)
-  cpack_append_variable_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_GROUP
-    _CPACK_ADDCOMP_STR)
-  cpack_append_variable_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DEPENDS
-    _CPACK_ADDCOMP_STR)
-  cpack_append_variable_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_INSTALL_TYPES
-    _CPACK_ADDCOMP_STR)
-  cpack_append_string_variable_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_ARCHIVE_FILE
-    _CPACK_ADDCOMP_STR)
-  cpack_append_option_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_HIDDEN
-    _CPACK_ADDCOMP_STR)
-  cpack_append_option_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_REQUIRED
-    _CPACK_ADDCOMP_STR)
-  cpack_append_option_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DISABLED
-    _CPACK_ADDCOMP_STR)
-  cpack_append_option_set_command(
-    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DOWNLOADED
-    _CPACK_ADDCOMP_STR)
-  # Backward compatibility issue.
-  # Write to config iff the macros is used after CPack.cmake has been
-  # included, other it's not necessary because the variables
-  # will be encoded by cpack_encode_variables.
-  if(CPack_CMake_INCLUDED)
-    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_ADDCOMP_STR}")
-  endif()
-endmacro()
-
-# Macro that adds a component group to the CPack installer
-macro(cpack_add_component_group grpname)
-  string(TOUPPER ${grpname} CPACK_ADDGRP_UNAME)
-  cpack_parse_arguments(CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}
-    "DISPLAY_NAME;DESCRIPTION;PARENT_GROUP"
-    "EXPANDED;BOLD_TITLE"
-    ${ARGN}
-    )
-
-  set(CPACK_ADDGRP_STR "\n# Configuration for component group \"${grpname}\"\n")
-  cpack_append_string_variable_set_command(
-    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DISPLAY_NAME
-    CPACK_ADDGRP_STR)
-  cpack_append_string_variable_set_command(
-    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DESCRIPTION
-    CPACK_ADDGRP_STR)
-  cpack_append_string_variable_set_command(
-    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_PARENT_GROUP
-    CPACK_ADDGRP_STR)
-  cpack_append_option_set_command(
-    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_EXPANDED
-    CPACK_ADDGRP_STR)
-  cpack_append_option_set_command(
-    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_BOLD_TITLE
-    CPACK_ADDGRP_STR)
-  # Backward compatibility issue.
-  # Write to config iff the macros is used after CPack.cmake has been
-  # included, other it's not necessary because the variables
-  # will be encoded by cpack_encode_variables.
-  if(CPack_CMake_INCLUDED)
-    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDGRP_STR}")
-  endif()
-endmacro()
-
-# Macro that adds an installation type to the CPack installer
-macro(cpack_add_install_type insttype)
-  string(TOUPPER ${insttype} CPACK_INSTTYPE_UNAME)
-  cpack_parse_arguments(CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}
-    "DISPLAY_NAME"
-    ""
-    ${ARGN}
-    )
-
-  set(CPACK_INSTTYPE_STR
-    "\n# Configuration for installation type \"${insttype}\"\n")
-  set(CPACK_INSTTYPE_STR
-    "${CPACK_INSTTYPE_STR}list(APPEND CPACK_ALL_INSTALL_TYPES ${insttype})\n")
-  cpack_append_string_variable_set_command(
-    CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}_DISPLAY_NAME
-    CPACK_INSTTYPE_STR)
-  # Backward compatibility issue.
-  # Write to config iff the macros is used after CPack.cmake has been
-  # included, other it's not necessary because the variables
-  # will be encoded by cpack_encode_variables.
-  if(CPack_CMake_INCLUDED)
-    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_INSTTYPE_STR}")
-  endif()
-endmacro()
-
-macro(cpack_configure_downloads site)
-  cpack_parse_arguments(CPACK_DOWNLOAD
-    "UPLOAD_DIRECTORY"
-    "ALL;ADD_REMOVE;NO_ADD_REMOVE"
-    ${ARGN}
-    )
-
-  set(CPACK_CONFIG_DL_STR
-    "\n# Downloaded components configuration\n")
-  set(CPACK_UPLOAD_DIRECTORY ${CPACK_DOWNLOAD_UPLOAD_DIRECTORY})
-  set(CPACK_DOWNLOAD_SITE ${site})
-  cpack_append_string_variable_set_command(
-    CPACK_DOWNLOAD_SITE
-    CPACK_CONFIG_DL_STR)
-  cpack_append_string_variable_set_command(
-    CPACK_UPLOAD_DIRECTORY
-    CPACK_CONFIG_DL_STR)
-  cpack_append_option_set_command(
-    CPACK_DOWNLOAD_ALL
-    CPACK_CONFIG_DL_STR)
-  if (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE})
-    set(CPACK_DOWNLOAD_ADD_REMOVE ON)
-  endif ()
-  set(CPACK_ADD_REMOVE ${CPACK_DOWNLOAD_ADD_REMOVE})
-  cpack_append_option_set_command(
-    CPACK_ADD_REMOVE
-    CPACK_CONFIG_DL_STR)
-  # Backward compatibility issue.
-  # Write to config iff the macros is used after CPack.cmake has been
-  # included, other it's not necessary because the variables
-  # will be encoded by cpack_encode_variables.
-  if(CPack_CMake_INCLUDED)
-    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_CONFIG_DL_STR}")
-  endif()
-endmacro()
-endif()
diff --git a/share/cmake-3.2/Modules/CPackDMG.cmake b/share/cmake-3.2/Modules/CPackDMG.cmake
deleted file mode 100644
index b7a6ba5..0000000
--- a/share/cmake-3.2/Modules/CPackDMG.cmake
+++ /dev/null
@@ -1,69 +0,0 @@
-#.rst:
-# CPackDMG
-# --------
-#
-# DragNDrop CPack generator (Mac OS X).
-#
-# Variables specific to CPack DragNDrop generator
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The following variables are specific to the DragNDrop installers built
-# on Mac OS X:
-#
-# .. variable:: CPACK_DMG_VOLUME_NAME
-#
-#  The volume name of the generated disk image. Defaults to
-#  CPACK_PACKAGE_FILE_NAME.
-#
-# .. variable:: CPACK_DMG_FORMAT
-#
-#  The disk image format. Common values are UDRO (UDIF read-only), UDZO (UDIF
-#  zlib-compressed) or UDBZ (UDIF bzip2-compressed). Refer to hdiutil(1) for
-#  more information on other available formats.
-#
-# .. variable:: CPACK_DMG_DS_STORE
-#
-#  Path to a custom DS_Store file. This .DS_Store file e.g. can be used to
-#  specify the Finder window position/geometry and layout (such as hidden
-#  toolbars, placement of the icons etc.). This file has to be generated by
-#  the Finder (either manually or through OSA-script) using a normal folder
-#  from which the .DS_Store file can then be extracted.
-#
-# .. variable:: CPACK_DMG_BACKGROUND_IMAGE
-#
-#  Path to a background image file. This file will be used as the background
-#  for the Finder Window when the disk image is opened.  By default no
-#  background image is set. The background image is applied after applying the
-#  custom .DS_Store file.
-#
-# .. variable:: CPACK_COMMAND_HDIUTIL
-#
-#  Path to the hdiutil(1) command used to operate on disk image files on Mac
-#  OS X. This variable can be used to override the automatically detected
-#  command (or specify its location if the auto-detection fails to find it.)
-#
-# .. variable:: CPACK_COMMAND_SETFILE
-#
-#  Path to the SetFile(1) command used to set extended attributes on files and
-#  directories on Mac OS X. This variable can be used to override the
-#  automatically detected command (or specify its location if the
-#  auto-detection fails to find it.)
-#
-# .. variable:: CPACK_COMMAND_REZ
-#
-#  Path to the Rez(1) command used to compile resources on Mac OS X. This
-#  variable can be used to override the automatically detected command (or
-#  specify its location if the auto-detection fails to find it.)
-
-#=============================================================================
-# Copyright 2006-2012 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
diff --git a/share/cmake-3.2/Modules/CPackDeb.cmake b/share/cmake-3.2/Modules/CPackDeb.cmake
deleted file mode 100644
index 8a4fa49..0000000
--- a/share/cmake-3.2/Modules/CPackDeb.cmake
+++ /dev/null
@@ -1,455 +0,0 @@
-#.rst:
-# CPackDeb
-# --------
-#
-# The builtin (binary) CPack Deb generator (Unix only)
-#
-# Variables specific to CPack Debian (DEB) generator
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# CPackDeb may be used to create Deb package using CPack.
-# CPackDeb is a CPack generator thus it uses the CPACK_XXX variables
-# used by CPack : http://www.cmake.org/Wiki/CMake:CPackConfiguration.
-# CPackDeb generator should work on any linux host but it will produce
-# better deb package when Debian specific tools 'dpkg-xxx' are usable on
-# the build system.
-#
-# CPackDeb has specific features which are controlled by the specifics
-# CPACK_DEBIAN_XXX variables.You'll find a detailed usage on the wiki:
-# http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#DEB_.28UNIX_only.29
-#
-# However as a handy reminder here comes the list of specific variables:
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_NAME
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_NAME (lower case)
-#
-#  The debian package summary
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_VERSION
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_VERSION
-#
-#  The debian package version
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_ARCHITECTURE
-#
-#  * Mandatory : YES
-#  * Default   : Output of dpkg --print-architecture (or i386 if dpkg is not found)
-#
-#  The debian package architecture
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_DEPENDS
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set deb dependencies.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_MAINTAINER
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_CONTACT
-#
-#  The debian package maintainer
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_DESCRIPTION
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_DESCRIPTION_SUMMARY
-#
-#  The debian package description
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_SECTION
-#
-#  * Mandatory : YES
-#  * Default   : 'devel'
-#
-# .. variable:: CPACK_DEBIAN_COMPRESSION_TYPE
-#
-#  * Mandatory : YES
-#  * Default   : 'gzip'
-#
-#     Possible values are: lzma, xz, bzip2 and gzip.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_PRIORITY
-#
-#  * Mandatory : YES
-#  * Default   : 'optional'
-#
-#  The debian package priority
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_HOMEPAGE
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  The URL of the web site for this package, preferably (when applicable) the
-#  site from which the original source can be obtained and any additional
-#  upstream documentation or information may be found.
-#  The content of this field is a simple URL without any surrounding
-#  characters such as <>.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_SHLIBDEPS
-#
-#  * Mandatory : NO
-#  * Default   : OFF
-#
-#  May be set to ON in order to use dpkg-shlibdeps to generate
-#  better package dependency list.
-#  You may need set CMAKE_INSTALL_RPATH toi appropriate value
-#  if you use this feature, because if you don't dpkg-shlibdeps
-#  may fail to find your own shared libs.
-#  See http://www.cmake.org/Wiki/CMake_RPATH_handling.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_DEBUG
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be set when invoking cpack in order to trace debug information
-#  during CPackDeb run.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_PREDEPENDS
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  This field is like Depends, except that it also forces dpkg to complete installation of
-#  the packages named before even starting the installation of the package which declares
-#  the pre-dependency.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_ENHANCES
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  This field is similar to Suggests but works in the opposite direction.
-#  It is used to declare that a package can enhance the functionality of another package.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_BREAKS
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  When one binary package declares that it breaks another, dpkg will refuse to allow the
-#  package which declares Breaks be installed unless the broken package is deconfigured first,
-#  and it will refuse to allow the broken package to be reconfigured.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_CONFLICTS
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  When one binary package declares a conflict with another using a Conflicts field,
-#  dpkg will refuse to allow them to be installed on the system at the same time.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_PROVIDES
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  A virtual package is one which appears in the Provides control field of another package.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_REPLACES
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  Packages can declare in their control file that they should overwrite
-#  files in certain other packages, or completely replace other packages.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_RECOMMENDS
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  Allows packages to declare a strong, but not absolute, dependency on other packages.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_SUGGESTS
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  see http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
-#  Allows packages to declare a suggested package install grouping.
-#
-# .. variable:: CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  This variable allow advanced user to add custom script to the
-#  control.tar.gz Typical usage is for conffiles, postinst, postrm, prerm.
-#  Usage::
-#
-#   set(CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
-#       "${CMAKE_CURRENT_SOURCE_DIR/prerm;${CMAKE_CURRENT_SOURCE_DIR}/postrm")
-
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-# Copyright 2007-2009 Mathieu Malaterre <mathieu.malaterre@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# CPack script for creating Debian package
-# Author: Mathieu Malaterre
-#
-# http://wiki.debian.org/HowToPackageForDebian
-
-if(CMAKE_BINARY_DIR)
-  message(FATAL_ERROR "CPackDeb.cmake may only be used by CPack internally.")
-endif()
-
-if(NOT UNIX)
-  message(FATAL_ERROR "CPackDeb.cmake may only be used under UNIX.")
-endif()
-
-# CPACK_DEBIAN_PACKAGE_SHLIBDEPS
-# If specify OFF, only user depends are used
-if(NOT DEFINED CPACK_DEBIAN_PACKAGE_SHLIBDEPS)
-  set(CPACK_DEBIAN_PACKAGE_SHLIBDEPS OFF)
-endif()
-
-find_program(FAKEROOT_EXECUTABLE fakeroot)
-if(FAKEROOT_EXECUTABLE)
-  set(CPACK_DEBIAN_FAKEROOT_EXECUTABLE ${FAKEROOT_EXECUTABLE})
-endif()
-
-if(CPACK_DEBIAN_PACKAGE_SHLIBDEPS)
-  # dpkg-shlibdeps is a Debian utility for generating dependency list
-  find_program(SHLIBDEPS_EXECUTABLE dpkg-shlibdeps)
-
-  # Check version of the dpkg-shlibdeps tool using CPackRPM method
-  if(SHLIBDEPS_EXECUTABLE)
-    execute_process(COMMAND env LC_ALL=C ${SHLIBDEPS_EXECUTABLE} --version
-      OUTPUT_VARIABLE _TMP_VERSION
-      ERROR_QUIET
-      OUTPUT_STRIP_TRAILING_WHITESPACE)
-    string(REGEX MATCH "dpkg-shlibdeps version ([0-9]+\\.[0-9]+\\.[0-9]+)"
-      SHLIBDEPS_EXECUTABLE_VERSION
-      ${_TMP_VERSION})
-    set(SHLIBDEPS_EXECUTABLE_VERSION "${CMAKE_MATCH_1}")
-    if(CPACK_DEBIAN_PACKAGE_DEBUG)
-      message( "CPackDeb Debug: dpkg-shlibdeps version is <${SHLIBDEPS_EXECUTABLE_VERSION}>")
-    endif()
-
-    # Generating binary list - Get type of all install files
-    execute_process(COMMAND find -type f
-      COMMAND xargs file
-      WORKING_DIRECTORY "${CPACK_TEMPORARY_DIRECTORY}"
-      OUTPUT_VARIABLE CPACK_DEB_INSTALL_FILES)
-
-    # Convert to CMake list
-    string(REPLACE "\n" ";" CPACK_DEB_INSTALL_FILES ${CPACK_DEB_INSTALL_FILES})
-
-    # Only dynamically linked ELF files are included
-    # Extract only file name infront of ":"
-    foreach ( _FILE ${CPACK_DEB_INSTALL_FILES})
-      if ( ${_FILE} MATCHES "ELF.*dynamically linked")
-         string(REGEX MATCH "(^.*):" _FILE_NAME ${_FILE})
-         list(APPEND CPACK_DEB_BINARY_FILES ${CMAKE_MATCH_1})
-      endif()
-    endforeach()
-
-    message( "CPackDeb: - Generating dependency list")
-
-    # Create blank control file for running dpkg-shlibdeps
-    # There might be some other way to invoke dpkg-shlibdeps without creating this file
-    # but standard debian package should not have anything that can collide with this file or directory
-    file(MAKE_DIRECTORY ${CPACK_TEMPORARY_DIRECTORY}/debian)
-    file(WRITE ${CPACK_TEMPORARY_DIRECTORY}/debian/control "")
-
-    # Execute dpkg-shlibdeps
-    # --ignore-missing-info : allow dpkg-shlibdeps to run even if some libs do not belong to a package
-    # -O : print to STDOUT
-    execute_process(COMMAND ${SHLIBDEPS_EXECUTABLE} --ignore-missing-info -O ${CPACK_DEB_BINARY_FILES}
-      WORKING_DIRECTORY "${CPACK_TEMPORARY_DIRECTORY}"
-      OUTPUT_VARIABLE SHLIBDEPS_OUTPUT
-      RESULT_VARIABLE SHLIBDEPS_RESULT
-      ERROR_VARIABLE SHLIBDEPS_ERROR
-      OUTPUT_STRIP_TRAILING_WHITESPACE )
-    if(CPACK_DEBIAN_PACKAGE_DEBUG)
-      # dpkg-shlibdeps will throw some warnings if some input files are not binary
-      message( "CPackDeb Debug: dpkg-shlibdeps warnings \n${SHLIBDEPS_ERROR}")
-    endif()
-    if (NOT SHLIBDEPS_RESULT EQUAL 0)
-      message (FATAL_ERROR "CPackDeb: dpkg-shlibdeps: ${SHLIBDEPS_ERROR}")
-    endif ()
-
-    #Get rid of prefix generated by dpkg-shlibdeps
-    string (REGEX REPLACE "^.*Depends=" "" CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS ${SHLIBDEPS_OUTPUT})
-
-    if(CPACK_DEBIAN_PACKAGE_DEBUG)
-      message( "CPackDeb Debug: Found dependency: ${CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS}")
-    endif()
-
-    # Remove blank control file
-    # Might not be safe if package actual contain file or directory named debian
-    file(REMOVE_RECURSE "${CPACK_TEMPORARY_DIRECTORY}/debian")
-
-    # Append user depend if set
-    if (CPACK_DEBIAN_PACKAGE_DEPENDS)
-      set (CPACK_DEBIAN_PACKAGE_DEPENDS "${CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS}, ${CPACK_DEBIAN_PACKAGE_DEPENDS}")
-    else ()
-      set (CPACK_DEBIAN_PACKAGE_DEPENDS "${CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS}")
-    endif ()
-
-  else ()
-    if(CPACK_DEBIAN_PACKAGE_DEBUG)
-      message( "CPackDeb Debug: Using only user-provided depends because dpkg-shlibdeps is not found.")
-    endif()
-  endif()
-
-else ()
-  if(CPACK_DEBIAN_PACKAGE_DEBUG)
-    message( "CPackDeb Debug: Using only user-provided depends")
-  endif()
-endif()
-
-# Let's define the control file found in debian package:
-
-# Binary package:
-# http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-binarycontrolfiles
-
-# DEBIAN/control
-# debian policy enforce lower case for package name
-# Package: (mandatory)
-if(NOT CPACK_DEBIAN_PACKAGE_NAME)
-  string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_DEBIAN_PACKAGE_NAME)
-endif()
-
-# Version: (mandatory)
-if(NOT CPACK_DEBIAN_PACKAGE_VERSION)
-  if(NOT CPACK_PACKAGE_VERSION)
-    message(FATAL_ERROR "CPackDeb: Debian package requires a package version")
-  endif()
-  set(CPACK_DEBIAN_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION})
-endif()
-
-# Architecture: (mandatory)
-if(NOT CPACK_DEBIAN_PACKAGE_ARCHITECTURE)
-  # There is no such thing as i686 architecture on debian, you should use i386 instead
-  # $ dpkg --print-architecture
-  find_program(DPKG_CMD dpkg)
-  if(NOT DPKG_CMD)
-    message(STATUS "CPackDeb: Can not find dpkg in your path, default to i386.")
-    set(CPACK_DEBIAN_PACKAGE_ARCHITECTURE i386)
-  endif()
-  execute_process(COMMAND "${DPKG_CMD}" --print-architecture
-    OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
-    OUTPUT_STRIP_TRAILING_WHITESPACE
-    )
-endif()
-
-# have a look at get_property(result GLOBAL PROPERTY ENABLED_FEATURES),
-# this returns the successful find_package() calls, maybe this can help
-# Depends:
-# You should set: DEBIAN_PACKAGE_DEPENDS
-# TODO: automate 'objdump -p | grep NEEDED'
-if(NOT CPACK_DEBIAN_PACKAGE_DEPENDS)
-  message(STATUS "CPACK_DEBIAN_PACKAGE_DEPENDS not set, the package will have no dependencies.")
-endif()
-
-# Maintainer: (mandatory)
-if(NOT CPACK_DEBIAN_PACKAGE_MAINTAINER)
-  if(NOT CPACK_PACKAGE_CONTACT)
-    message(FATAL_ERROR "CPackDeb: Debian package requires a maintainer for a package, set CPACK_PACKAGE_CONTACT or CPACK_DEBIAN_PACKAGE_MAINTAINER")
-  endif()
-  set(CPACK_DEBIAN_PACKAGE_MAINTAINER ${CPACK_PACKAGE_CONTACT})
-endif()
-
-# Description: (mandatory)
-if(NOT CPACK_DEBIAN_PACKAGE_DESCRIPTION)
-  if(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
-    message(FATAL_ERROR "CPackDeb: Debian package requires a summary for a package, set CPACK_PACKAGE_DESCRIPTION_SUMMARY or CPACK_DEBIAN_PACKAGE_DESCRIPTION")
-  endif()
-  set(CPACK_DEBIAN_PACKAGE_DESCRIPTION ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
-endif()
-
-# Section: (recommended)
-if(NOT CPACK_DEBIAN_PACKAGE_SECTION)
-  set(CPACK_DEBIAN_PACKAGE_SECTION "devel")
-endif()
-
-# Priority: (recommended)
-if(NOT CPACK_DEBIAN_PACKAGE_PRIORITY)
-  set(CPACK_DEBIAN_PACKAGE_PRIORITY "optional")
-endif()
-
-# Compression: (recommended)
-if(NOT CPACK_DEBIAN_COMPRESSION_TYPE)
-  set(CPACK_DEBIAN_COMPRESSION_TYPE "gzip")
-endif()
-
-
-# Recommends:
-# You should set: CPACK_DEBIAN_PACKAGE_RECOMMENDS
-
-# Suggests:
-# You should set: CPACK_DEBIAN_PACKAGE_SUGGESTS
-
-# CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
-# This variable allow advanced user to add custom script to the control.tar.gz (inside the .deb archive)
-# Typical examples are:
-# - conffiles
-# - postinst
-# - postrm
-# - prerm"
-# Usage:
-# set(CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
-#    "${CMAKE_CURRENT_SOURCE_DIR/prerm;${CMAKE_CURRENT_SOURCE_DIR}/postrm")
-
-# Are we packaging components ?
-if(CPACK_DEB_PACKAGE_COMPONENT)
-  set(CPACK_DEB_PACKAGE_COMPONENT_PART_NAME "-${CPACK_DEB_PACKAGE_COMPONENT}")
-  string(TOLOWER "${CPACK_PACKAGE_NAME}${CPACK_DEB_PACKAGE_COMPONENT_PART_NAME}" CPACK_DEBIAN_PACKAGE_NAME)
-else()
-  set(CPACK_DEB_PACKAGE_COMPONENT_PART_NAME "")
-endif()
-
-set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_DEB_PACKAGE_COMPONENT_PART_PATH}")
-
-# Print out some debug information if we were asked for that
-if(CPACK_DEBIAN_PACKAGE_DEBUG)
-   message("CPackDeb:Debug: CPACK_TOPLEVEL_DIRECTORY          = ${CPACK_TOPLEVEL_DIRECTORY}")
-   message("CPackDeb:Debug: CPACK_TOPLEVEL_TAG                = ${CPACK_TOPLEVEL_TAG}")
-   message("CPackDeb:Debug: CPACK_TEMPORARY_DIRECTORY         = ${CPACK_TEMPORARY_DIRECTORY}")
-   message("CPackDeb:Debug: CPACK_OUTPUT_FILE_NAME            = ${CPACK_OUTPUT_FILE_NAME}")
-   message("CPackDeb:Debug: CPACK_OUTPUT_FILE_PATH            = ${CPACK_OUTPUT_FILE_PATH}")
-   message("CPackDeb:Debug: CPACK_PACKAGE_FILE_NAME           = ${CPACK_PACKAGE_FILE_NAME}")
-   message("CPackDeb:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY   = ${CPACK_PACKAGE_INSTALL_DIRECTORY}")
-   message("CPackDeb:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}")
-endif()
-
-# For debian source packages:
-# debian/control
-# http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-sourcecontrolfiles
-
-# .dsc
-# http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-debiansourcecontrolfiles
-
-# Builds-Depends:
-#if(NOT CPACK_DEBIAN_PACKAGE_BUILDS_DEPENDS)
-#  set(CPACK_DEBIAN_PACKAGE_BUILDS_DEPENDS
-#    "debhelper (>> 5.0.0), libncurses5-dev, tcl8.4"
-#  )
-#endif()
diff --git a/share/cmake-3.2/Modules/CPackIFW.cmake b/share/cmake-3.2/Modules/CPackIFW.cmake
deleted file mode 100644
index e5b7601..0000000
--- a/share/cmake-3.2/Modules/CPackIFW.cmake
+++ /dev/null
@@ -1,517 +0,0 @@
-#.rst:
-# CPackIFW
-# --------
-#
-# .. _QtIFW: http://qt-project.org/doc/qtinstallerframework/index.html
-#
-# This module looks for the location of the command line utilities supplied with
-# the Qt Installer Framework (QtIFW_).
-#
-# The module also defines several commands to control the behavior of the
-# CPack ``IFW`` generator.
-#
-#
-# Overview
-# ^^^^^^^^
-#
-# CPack ``IFW`` generator helps you to create online and offline
-# binary cross-platform installers with a graphical user interface.
-#
-# CPack IFW generator prepares project installation and generates configuration
-# and meta information for QtIFW_ tools.
-#
-# The QtIFW_ provides a set of tools and utilities to create
-# installers for the supported desktop Qt platforms: Linux, Microsoft Windows,
-# and Mac OS X.
-#
-# You should also install QtIFW_ to use CPack ``IFW`` generator.
-# If you don't use a default path for the installation, please set
-# the used path in the variable ``QTIFWDIR``.
-#
-# Variables
-# ^^^^^^^^^
-#
-# You can use the following variables to change behavior of CPack ``IFW`` generator.
-#
-# Package
-# """""""
-#
-# .. variable:: CPACK_IFW_PACKAGE_TITLE
-#
-#  Name of the installer as displayed on the title bar.
-#  By default used :variable:`CPACK_PACKAGE_DESCRIPTION_SUMMARY`
-#
-# .. variable:: CPACK_IFW_PACKAGE_PUBLISHER
-#
-#  Publisher of the software (as shown in the Windows Control Panel).
-#  By default used :variable:`CPACK_PACKAGE_VENDOR`
-#
-# .. variable:: CPACK_IFW_PRODUCT_URL
-#
-#  URL to a page that contains product information on your web site.
-#
-# .. variable:: CPACK_IFW_PACKAGE_ICON
-#
-#  Filename for a custom installer icon. The actual file is '.icns' (Mac OS X),
-#  '.ico' (Windows). No functionality on Unix.
-#
-# .. variable:: CPACK_IFW_PACKAGE_WINDOW_ICON
-#
-#  Filename for a custom window icon in PNG format for the Installer application.
-#
-# .. variable:: CPACK_IFW_PACKAGE_LOGO
-#
-#  Filename for a logo is used as QWizard::LogoPixmap.
-#
-# .. variable:: CPACK_IFW_TARGET_DIRECTORY
-#
-#  Default target directory for installation.
-#  By default used "@ApplicationsDir@/:variable:`CPACK_PACKAGE_INSTALL_DIRECTORY`"
-#
-#  You can use predefined variables.
-#
-# .. variable:: CPACK_IFW_ADMIN_TARGET_DIRECTORY
-#
-#  Default target directory for installation with administrator rights.
-#
-#  You can use predefined variables.
-#
-# .. variable:: CPACK_IFW_PACKAGE_GROUP
-#
-#  The group, which will be used to configure the root package
-#
-# .. variable:: CPACK_IFW_PACKAGE_NAME
-#
-#  The root package name, which will be used if configuration group is not
-#  specified
-#
-# .. variable:: CPACK_IFW_REPOSITORIES_ALL
-#
-#  The list of remote repositories.
-#
-#  The default value of this variable is computed by CPack and contains
-#  all repositories added with command :command:`cpack_ifw_add_repository`
-#
-# .. variable:: CPACK_IFW_DOWNLOAD_ALL
-#
-#  If this is ``ON`` all components will be downloaded.
-#  By default is ``OFF`` or used value
-#  from ``CPACK_DOWNLOAD_ALL`` if set
-#
-# Components
-# """"""""""
-#
-# .. variable:: CPACK_IFW_RESOLVE_DUPLICATE_NAMES
-#
-#  Resolve duplicate names when installing components with groups.
-#
-# .. variable:: CPACK_IFW_PACKAGES_DIRECTORIES
-#
-#  Additional prepared packages dirs that will be used to resolve
-#  dependent components.
-#
-# Tools
-# """"""""
-#
-# .. variable:: CPACK_IFW_BINARYCREATOR_EXECUTABLE
-#
-#  The path to "binarycreator" command line client.
-#
-#  This variable is cached and can be configured user if need.
-#
-# .. variable:: CPACK_IFW_REPOGEN_EXECUTABLE
-#
-#  The path to "repogen" command line client.
-#
-#  This variable is cached and can be configured user if need.
-#
-# Commands
-# ^^^^^^^^^
-#
-# The module defines the following commands:
-#
-# --------------------------------------------------------------------------
-#
-# .. command:: cpack_ifw_configure_component
-#
-# Sets the arguments specific to the CPack IFW generator.
-#
-# ::
-#
-#   cpack_ifw_configure_component(<compname> [COMMON]
-#                       [NAME <name>]
-#                       [VERSION <version>]
-#                       [SCRIPT <script>]
-#                       [PRIORITY <priority>]
-#                       [DEPENDS <com_id> ...]
-#                       [LICENSES <display_name> <file_path> ...])
-#
-# This command should be called after cpack_add_component command.
-#
-# ``COMMON`` if set, then the component will be packaged and installed as part
-# of a group to which it belongs.
-#
-# ``VERSION`` is version of component.
-# By default used :variable:`CPACK_PACKAGE_VERSION`.
-#
-# ``SCRIPT`` is a relative or absolute path to operations script
-# for this component.
-#
-# ``NAME`` is used to create domain-like identification for this component.
-# By default used origin component name.
-#
-# ``PRIORITY`` is priority of the component in the tree.
-#
-# ``DEPENDS`` list of dependency component identifiers in QtIFW_ style.
-#
-# ``LICENSES`` pair of <display_name> and <file_path> of license text for this
-# component. You can specify more then one license.
-#
-# --------------------------------------------------------------------------
-#
-# .. command:: cpack_ifw_configure_component_group
-#
-# Sets the arguments specific to the CPack IFW generator.
-#
-# ::
-#
-#   cpack_ifw_configure_component_group(<grpname>
-#                       [VERSION <version>]
-#                       [NAME <name>]
-#                       [SCRIPT <script>]
-#                       [PRIORITY <priority>]
-#                       [LICENSES <display_name> <file_path> ...])
-#
-# This command should be called after cpack_add_component_group command.
-#
-# ``VERSION`` is version of component group.
-# By default used :variable:`CPACK_PACKAGE_VERSION`.
-#
-# ``NAME`` is used to create domain-like identification for this component group.
-# By default used origin component group name.
-#
-# ``SCRIPT`` is a relative or absolute path to operations script
-# for this component group.
-#
-# ``PRIORITY`` is priority of the component group in the tree.
-#
-# ``LICENSES`` pair of <display_name> and <file_path> of license text for this
-# component group. You can specify more then one license.
-#
-# --------------------------------------------------------------------------
-#
-# .. command:: cpack_ifw_add_repository
-#
-# Add QtIFW_ specific remote repository.
-#
-# ::
-#
-#   cpack_ifw_add_repository(<reponame> [DISABLED]
-#                       URL <url>
-#                       [USERNAME <username>]
-#                       [PASSWORD <password>]
-#                       [DISPLAY_NAME <display_name>])
-#
-# This macro will also add the <reponame> repository
-# to a variable :variable:`CPACK_IFW_REPOSITORIES_ALL`
-#
-# ``DISABLED`` if set, then the repository will be disabled by default.
-#
-# ``URL`` is points to a list of available components.
-#
-# ``USERNAME`` is used as user on a protected repository.
-#
-# ``PASSWORD`` is password to use on a protected repository.
-#
-# ``DISPLAY_NAME`` is string to display instead of the URL.
-#
-# Example usage
-# ^^^^^^^^^^^^^
-#
-# .. code-block:: cmake
-#
-#    set(CPACK_PACKAGE_NAME "MyPackage")
-#    set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "MyPackage Installation Example")
-#    set(CPACK_PACKAGE_VERSION "1.0.0") # Version of installer
-#
-#    include(CPack)
-#    include(CPackIFW)
-#
-#    cpack_add_component(myapp
-#        DISPLAY_NAME "MyApp"
-#        DESCRIPTION "My Application")
-#    cpack_ifw_configure_component(myapp
-#        VERSION "1.2.3" # Version of component
-#        SCRIPT "operations.qs")
-#    cpack_add_component(mybigplugin
-#        DISPLAY_NAME "MyBigPlugin"
-#        DESCRIPTION "My Big Downloadable Plugin"
-#        DOWNLOADED)
-#    cpack_ifw_add_repository(myrepo
-#        URL "http://example.com/ifw/repo/myapp"
-#        DISPLAY_NAME "My Application Repository")
-#
-#
-# Online installer
-# ^^^^^^^^^^^^^^^^
-#
-# By default CPack IFW generator makes offline installer. This means that all
-# components will be packaged into a binary file.
-#
-# To make a component downloaded, you must set the ``DOWNLOADED`` option in
-# :command:`cpack_add_component`.
-#
-# Then you would use the command :command:`cpack_configure_downloads`.
-# If you set ``ALL`` option all components will be downloaded.
-#
-# You also can use command :command:`cpack_ifw_add_repository` and
-# variable :variable:`CPACK_IFW_DOWNLOAD_ALL` for more specific configuration.
-#
-# CPack IFW generator creates "repository" dir in current binary dir. You
-# would copy content of this dir to specified ``site`` (``url``).
-#
-# See Also
-# ^^^^^^^^
-#
-# Qt Installer Framework Manual:
-#
-#  Index page
-#   http://qt-project.org/doc/qtinstallerframework/index.html
-#
-#  Component Scripting
-#   http://qt-project.org/doc/qtinstallerframework/scripting.html
-#
-#  Predefined Variables
-#   http://qt-project.org/doc/qtinstallerframework/scripting.html#predefined-variables
-#
-# Download Qt Installer Framework for you platform from Qt Project site:
-#  http://download.qt-project.org/official_releases/qt-installer-framework/
-#
-
-#=============================================================================
-# Copyright 2014 Kitware, Inc.
-# Copyright 2014 Konstantin Podsvirov <konstantin@podsvirov.pro>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#=============================================================================
-# Search Qt Installer Framework tools
-#=============================================================================
-
-# Default path
-
-set(_CPACK_IFW_PATHS
-  "${QTIFWDIR}"
-  "$ENV{QTIFWDIR}"
-  "${QTDIR}"
-  "$ENV{QTIFWDIR}")
-if(WIN32)
-  list(APPEND _CPACK_IFW_PATHS
-    "$ENV{HOMEDRIVE}/Qt"
-    "C:/Qt")
-else()
-  list(APPEND _CPACK_IFW_PATHS
-    "$ENV{HOME}/Qt"
-    "/opt/Qt")
-endif()
-
-set(_CPACK_IFW_SUFFIXES
-  "bin"
-  "QtIFW-1.7.0/bin"
-  "QtIFW-1.6.0/bin"
-  "QtIFW-1.5.0/bin"
-  "QtIFW-1.4.0/bin"
-  "QtIFW-1.3.0/bin")
-
-# Look for 'binarycreator'
-
-find_program(CPACK_IFW_BINARYCREATOR_EXECUTABLE
-  NAMES binarycreator
-  PATHS ${_CPACK_IFW_PATHS}
-  PATH_SUFFIXES ${_CPACK_IFW_SUFFIXES}
-  DOC "QtIFW binarycreator command line client")
-
-mark_as_advanced(CPACK_IFW_BINARYCREATOR_EXECUTABLE)
-
-# Look for 'repogen'
-
-find_program(CPACK_IFW_REPOGEN_EXECUTABLE
-  NAMES repogen
-  PATHS ${_CPACK_IFW_PATHS}
-  PATH_SUFFIXES ${_CPACK_IFW_SUFFIXES}
-  DOC "QtIFW repogen command line client"
-  )
-mark_as_advanced(CPACK_IFW_REPOGEN_EXECUTABLE)
-
-#
-## Next code is included only once
-#
-
-if(NOT CPackIFW_CMake_INCLUDED)
-set(CPackIFW_CMake_INCLUDED 1)
-
-#=============================================================================
-# Macro definition
-#=============================================================================
-
-# Macro definition based on CPackComponent
-
-if(NOT CPackComponent_CMake_INCLUDED)
-    include(CPackComponent)
-endif()
-
-if(NOT __CMAKE_PARSE_ARGUMENTS_INCLUDED)
-    include(CMakeParseArguments)
-endif()
-
-# Resolve full filename for script file
-macro(_cpack_ifw_resolve_script _variable)
-  set(_ifw_script_macro ${_variable})
-  set(_ifw_script_file ${${_ifw_script_macro}})
-  if(DEFINED ${_ifw_script_macro})
-    get_filename_component(${_ifw_script_macro} ${_ifw_script_file} ABSOLUTE)
-    set(_ifw_script_file ${${_ifw_script_macro}})
-    if(NOT EXISTS ${_ifw_script_file})
-      message(WARNING "CPack IFW: script file \"${_ifw_script_file}\" is not exists")
-      set(${_ifw_script_macro})
-    endif()
-  endif()
-endmacro()
-
-# Resolve full path to lisense file
-macro(_cpack_ifw_resolve_lisenses _variable)
-  if(${_variable})
-    set(_ifw_license_file FALSE)
-    set(_ifw_licenses_fix)
-    foreach(_ifw_licenses_arg ${${_variable}})
-      if(_ifw_license_file)
-        get_filename_component(_ifw_licenses_arg "${_ifw_licenses_arg}" ABSOLUTE)
-        set(_ifw_license_file FALSE)
-      else()
-        set(_ifw_license_file TRUE)
-      endif()
-      list(APPEND _ifw_licenses_fix "${_ifw_licenses_arg}")
-    endforeach(_ifw_licenses_arg)
-    set(${_variable} "${_ifw_licenses_fix}")
-  endif()
-endmacro()
-
-# Macro for configure component
-macro(cpack_ifw_configure_component compname)
-
-  string(TOUPPER ${compname} _CPACK_IFWCOMP_UNAME)
-
-  set(_IFW_OPT COMMON)
-  set(_IFW_ARGS VERSION SCRIPT NAME PRIORITY)
-  set(_IFW_MULTI_ARGS DEPENDS LICENSES)
-  cmake_parse_arguments(CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME} "${_IFW_OPT}" "${_IFW_ARGS}" "${_IFW_MULTI_ARGS}" ${ARGN})
-
-  _cpack_ifw_resolve_script(CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_SCRIPT)
-  _cpack_ifw_resolve_lisenses(CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_LICENSES)
-
-  set(_CPACK_IFWCOMP_STR "\n# Configuration for IFW component \"${compname}\"\n")
-
-  foreach(_IFW_ARG_NAME ${_IFW_OPT})
-  cpack_append_option_set_command(
-    CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWCOMP_STR)
-  endforeach()
-
-  foreach(_IFW_ARG_NAME ${_IFW_ARGS})
-  cpack_append_string_variable_set_command(
-    CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWCOMP_STR)
-  endforeach()
-
-  foreach(_IFW_ARG_NAME ${_IFW_MULTI_ARGS})
-  cpack_append_variable_set_command(
-    CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWCOMP_STR)
-  endforeach()
-
-  if(CPack_CMake_INCLUDED)
-    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_IFWCOMP_STR}")
-  endif()
-
-endmacro()
-
-# Macro for configure group
-macro(cpack_ifw_configure_component_group grpname)
-
-  string(TOUPPER ${grpname} _CPACK_IFWGRP_UNAME)
-
-  set(_IFW_OPT)
-  set(_IFW_ARGS NAME VERSION SCRIPT PRIORITY)
-  set(_IFW_MULTI_ARGS LICENSES)
-  cmake_parse_arguments(CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME} "${_IFW_OPT}" "${_IFW_ARGS}" "${_IFW_MULTI_ARGS}" ${ARGN})
-
-  _cpack_ifw_resolve_script(CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_SCRIPT)
-  _cpack_ifw_resolve_lisenses(CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_LICENSES)
-
-  set(_CPACK_IFWGRP_STR "\n# Configuration for IFW component group \"${grpname}\"\n")
-
-  foreach(_IFW_ARG_NAME ${_IFW_ARGS})
-  cpack_append_string_variable_set_command(
-    CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWGRP_STR)
-  endforeach()
-
-  foreach(_IFW_ARG_NAME ${_IFW_MULTI_ARGS})
-  cpack_append_variable_set_command(
-    CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWGRP_STR)
-  endforeach()
-
-  if(CPack_CMake_INCLUDED)
-    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_IFWGRP_STR}")
-  endif()
-endmacro()
-
-# Macro for adding repository
-macro(cpack_ifw_add_repository reponame)
-
-  string(TOUPPER ${reponame} _CPACK_IFWREPO_UNAME)
-
-  set(_IFW_OPT DISABLED)
-  set(_IFW_ARGS URL USERNAME PASSWORD DISPLAY_NAME)
-  set(_IFW_MULTI_ARGS)
-  cmake_parse_arguments(CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME} "${_IFW_OPT}" "${_IFW_ARGS}" "${_IFW_MULTI_ARGS}" ${ARGN})
-
-  set(_CPACK_IFWREPO_STR "\n# Configuration for IFW repository \"${reponame}\"\n")
-
-  foreach(_IFW_ARG_NAME ${_IFW_OPT})
-  cpack_append_option_set_command(
-    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWREPO_STR)
-  endforeach()
-
-  foreach(_IFW_ARG_NAME ${_IFW_ARGS})
-  cpack_append_string_variable_set_command(
-    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWREPO_STR)
-  endforeach()
-
-  foreach(_IFW_ARG_NAME ${_IFW_MULTI_ARGS})
-  cpack_append_variable_set_command(
-    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
-    _CPACK_IFWREPO_STR)
-  endforeach()
-
-  list(APPEND CPACK_IFW_REPOSITORIES_ALL ${reponame})
-  set(_CPACK_IFWREPO_STR "${_CPACK_IFWREPO_STR}list(APPEND CPACK_IFW_REPOSITORIES_ALL ${reponame})\n")
-
-  if(CPack_CMake_INCLUDED)
-    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_IFWREPO_STR}")
-  endif()
-
-endmacro()
-
-endif() # NOT CPackIFW_CMake_INCLUDED
diff --git a/share/cmake-3.2/Modules/CPackNSIS.cmake b/share/cmake-3.2/Modules/CPackNSIS.cmake
deleted file mode 100644
index 4b2e0eb..0000000
--- a/share/cmake-3.2/Modules/CPackNSIS.cmake
+++ /dev/null
@@ -1,135 +0,0 @@
-#.rst:
-# CPackNSIS
-# ---------
-#
-# CPack NSIS generator specific options
-#
-# Variables specific to CPack NSIS generator
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The following variables are specific to the graphical installers built
-# on Windows using the Nullsoft Installation System.
-#
-# .. variable:: CPACK_NSIS_INSTALL_ROOT
-#
-#  The default installation directory presented to the end user by the NSIS
-#  installer is under this root dir. The full directory presented to the end
-#  user is: ${CPACK_NSIS_INSTALL_ROOT}/${CPACK_PACKAGE_INSTALL_DIRECTORY}
-#
-# .. variable:: CPACK_NSIS_MUI_ICON
-#
-#  An icon filename.  The name of a ``*.ico`` file used as the main icon for the
-#  generated install program.
-#
-# .. variable:: CPACK_NSIS_MUI_UNIICON
-#
-#  An icon filename.  The name of a ``*.ico`` file used as the main icon for the
-#  generated uninstall program.
-#
-# .. variable:: CPACK_NSIS_INSTALLER_MUI_ICON_CODE
-#
-#  undocumented.
-#
-# .. variable:: CPACK_NSIS_EXTRA_PREINSTALL_COMMANDS
-#
-#  Extra NSIS commands that will be added to the beginning of the install
-#  Section, before your install tree is available on the target system.
-#
-# .. variable:: CPACK_NSIS_EXTRA_INSTALL_COMMANDS
-#
-#  Extra NSIS commands that will be added to the end of the install Section,
-#  after your install tree is available on the target system.
-#
-# .. variable:: CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS
-#
-#  Extra NSIS commands that will be added to the uninstall Section, before
-#  your install tree is removed from the target system.
-#
-# .. variable:: CPACK_NSIS_COMPRESSOR
-#
-#  The arguments that will be passed to the NSIS SetCompressor command.
-#
-# .. variable:: CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL
-#
-#  Ask about uninstalling previous versions first.  If this is set to "ON",
-#  then an installer will look for previous installed versions and if one is
-#  found, ask the user whether to uninstall it before proceeding with the
-#  install.
-#
-# .. variable:: CPACK_NSIS_MODIFY_PATH
-#
-#  Modify PATH toggle.  If this is set to "ON", then an extra page will appear
-#  in the installer that will allow the user to choose whether the program
-#  directory should be added to the system PATH variable.
-#
-# .. variable:: CPACK_NSIS_DISPLAY_NAME
-#
-#  The display name string that appears in the Windows Add/Remove Program
-#  control panel
-#
-# .. variable:: CPACK_NSIS_PACKAGE_NAME
-#
-#  The title displayed at the top of the installer.
-#
-# .. variable:: CPACK_NSIS_INSTALLED_ICON_NAME
-#
-#  A path to the executable that contains the installer icon.
-#
-# .. variable:: CPACK_NSIS_HELP_LINK
-#
-#  URL to a web site providing assistance in installing your application.
-#
-# .. variable:: CPACK_NSIS_URL_INFO_ABOUT
-#
-#  URL to a web site providing more information about your application.
-#
-# .. variable:: CPACK_NSIS_CONTACT
-#
-#  Contact information for questions and comments about the installation
-#  process.
-#
-# .. variable:: CPACK_NSIS_CREATE_ICONS_EXTRA
-#
-#  Additional NSIS commands for creating start menu shortcuts.
-#
-# .. variable:: CPACK_NSIS_DELETE_ICONS_EXTRA
-#
-#  Additional NSIS commands to uninstall start menu shortcuts.
-#
-# .. variable:: CPACK_NSIS_EXECUTABLES_DIRECTORY
-#
-#  Creating NSIS start menu links assumes that they are in 'bin' unless this
-#  variable is set.  For example, you would set this to 'exec' if your
-#  executables are in an exec directory.
-#
-# .. variable:: CPACK_NSIS_MUI_FINISHPAGE_RUN
-#
-#  Specify an executable to add an option to run on the finish page of the
-#  NSIS installer.
-#
-# .. variable:: CPACK_NSIS_MENU_LINKS
-#
-#  Specify links in [application] menu.  This should contain a list of pair
-#  "link" "link name". The link may be an URL or a path relative to
-#  installation prefix.  Like::
-#
-#   set(CPACK_NSIS_MENU_LINKS
-#       "doc/cmake-@CMake_VERSION_MAJOR@.@CMake_VERSION_MINOR@/cmake.html"
-#       "CMake Help" "http://www.cmake.org" "CMake Web Site")
-#
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#FIXME we should put NSIS specific code here
-#FIXME but I'm not doing it because I'm not able to test it...
diff --git a/share/cmake-3.2/Modules/CPackRPM.cmake b/share/cmake-3.2/Modules/CPackRPM.cmake
deleted file mode 100644
index e3f74d8..0000000
--- a/share/cmake-3.2/Modules/CPackRPM.cmake
+++ /dev/null
@@ -1,1323 +0,0 @@
-#.rst:
-# CPackRPM
-# --------
-#
-# The builtin (binary) CPack RPM generator (Unix only)
-#
-# Variables specific to CPack RPM generator
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# CPackRPM may be used to create RPM package using CPack.  CPackRPM is a
-# CPack generator thus it uses the CPACK_XXX variables used by CPack :
-# http://www.cmake.org/Wiki/CMake:CPackConfiguration
-#
-# However CPackRPM has specific features which are controlled by the
-# specifics CPACK_RPM_XXX variables.  CPackRPM is a component aware
-# generator so when CPACK_RPM_COMPONENT_INSTALL is ON some more
-# CPACK_RPM_<ComponentName>_XXXX variables may be used in order to have
-# component specific values.  Note however that <componentName> refers
-# to the **grouping name**.  This may be either a component name or a
-# component GROUP name.  Usually those vars correspond to RPM spec file
-# entities, one may find information about spec files here
-# http://www.rpm.org/wiki/Docs.  You'll find a detailed usage of
-# CPackRPM on the wiki:
-#
-# ::
-#
-#   http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29
-#
-# However as a handy reminder here comes the list of specific variables:
-#
-# .. variable:: CPACK_RPM_PACKAGE_SUMMARY
-#               CPACK_RPM_<component>_PACKAGE_SUMMARY
-#
-#  The RPM package summary.
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_DESCRIPTION_SUMMARY
-#
-# .. variable:: CPACK_RPM_PACKAGE_NAME
-#
-#  The RPM package name.
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_NAME
-#
-# .. variable:: CPACK_RPM_PACKAGE_VERSION
-#
-#  The RPM package version.
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_VERSION
-#
-# .. variable:: CPACK_RPM_PACKAGE_ARCHITECTURE
-#
-#  The RPM package architecture.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  This may be set to "noarch" if you know you are building a noarch package.
-#
-# .. variable:: CPACK_RPM_PACKAGE_RELEASE
-#
-#  The RPM package release.
-#
-#  * Mandatory : YES
-#  * Default   : 1
-#
-#  This is the numbering of the RPM package itself, i.e. the version of the
-#  packaging and not the version of the content (see
-#  CPACK_RPM_PACKAGE_VERSION). One may change the default value if the
-#  previous packaging was buggy and/or you want to put here a fancy Linux
-#  distro specific numbering.
-#
-# .. variable:: CPACK_RPM_PACKAGE_LICENSE
-#
-#  The RPM package license policy.
-#
-#  * Mandatory : YES
-#  * Default   : "unknown"
-#
-# .. variable:: CPACK_RPM_PACKAGE_GROUP
-#
-#  The RPM package group.
-#
-#  * Mandatory : YES
-#  * Default   : "unknown"
-#
-# .. variable:: CPACK_RPM_PACKAGE_VENDOR
-#
-#  The RPM package vendor.
-#
-#  * Mandatory : YES
-#  * Default   : CPACK_PACKAGE_VENDOR if set or "unknown"
-#
-# .. variable:: CPACK_RPM_PACKAGE_URL
-#
-#  The projects URL.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-# .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION
-#               CPACK_RPM_<component>_PACKAGE_DESCRIPTION
-#
-#  RPM package description.
-#
-#  * Mandatory : YES
-#  * Default : CPACK_COMPONENT_<compName>_DESCRIPTION (component based installers
-#    only) if set, CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package
-#    description available"
-#
-# .. variable:: CPACK_RPM_COMPRESSION_TYPE
-#
-#  RPM compression type.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to override RPM compression type to be used to build the
-#  RPM. For example some Linux distribution now default to lzma or xz
-#  compression whereas older cannot use such RPM.  Using this one can enforce
-#  compression type to be used.  Possible value are: lzma, xz, bzip2 and gzip.
-#
-# .. variable:: CPACK_RPM_PACKAGE_REQUIRES
-#
-#  RPM spec requires field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set RPM dependencies (requires).  Note that you must enclose
-#  the complete requires string between quotes, for example::
-#
-#   set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8")
-#
-#  The required package list of an RPM file could be printed with::
-#
-#   rpm -qp --requires file.rpm
-#
-# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE
-#
-#  RPM spec requires(pre) field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set RPM preinstall dependencies (requires(pre)).  Note that you must enclose
-#  the complete requires string between quotes, for example::
-#
-#   set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts")
-#
-# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST
-#
-#  RPM spec requires(post) field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set RPM postinstall dependencies (requires(post)).  Note that you must enclose
-#  the complete requires string between quotes, for example::
-#
-#   set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts")
-#
-#
-# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN
-#
-#  RPM spec requires(postun) field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set RPM postuninstall dependencies (requires(postun)).  Note that you must enclose
-#  the complete requires string between quotes, for example::
-#
-#   set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts")
-#
-#
-# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN
-#
-#  RPM spec requires(preun) field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set RPM preuninstall dependencies (requires(preun)).  Note that you must enclose
-#  the complete requires string between quotes, for example::
-#
-#   set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts")
-#
-# .. variable:: CPACK_RPM_PACKAGE_SUGGESTS
-#
-#  RPM spec suggest field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set weak RPM dependencies (suggests).  Note that you must
-#  enclose the complete requires string between quotes.
-#
-# .. variable:: CPACK_RPM_PACKAGE_PROVIDES
-#
-#  RPM spec provides field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set RPM dependencies (provides).  The provided package list
-#  of an RPM file could be printed with::
-#
-#   rpm -qp --provides file.rpm
-#
-# .. variable:: CPACK_RPM_PACKAGE_OBSOLETES
-#
-#  RPM spec obsoletes field.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to set RPM packages that are obsoleted by this one.
-#
-# .. variable:: CPACK_RPM_PACKAGE_RELOCATABLE
-#
-#  build a relocatable RPM.
-#
-#  * Mandatory : NO
-#  * Default   : CPACK_PACKAGE_RELOCATABLE
-#
-#  If this variable is set to TRUE or ON CPackRPM will try
-#  to build a relocatable RPM package. A relocatable RPM may
-#  be installed using::
-#
-#   rpm --prefix or --relocate
-#
-#  in order to install it at an alternate place see rpm(8).  Note that
-#  currently this may fail if CPACK_SET_DESTDIR is set to ON.  If
-#  CPACK_SET_DESTDIR is set then you will get a warning message but if there
-#  is file installed with absolute path you'll get unexpected behavior.
-#
-# .. variable:: CPACK_RPM_SPEC_INSTALL_POST
-#
-#  * Mandatory : NO
-#  * Default   : -
-#  * Deprecated: YES
-#
-#  This way of specifying post-install script is deprecated, use
-#  CPACK_RPM_POST_INSTALL_SCRIPT_FILE.
-#  May be used to set an RPM post-install command inside the spec file.
-#  For example setting it to "/bin/true" may be used to prevent
-#  rpmbuild to strip binaries.
-#
-# .. variable:: CPACK_RPM_SPEC_MORE_DEFINE
-#
-#  RPM extended spec definitions lines.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to add any %define lines to the generated spec file.
-#
-# .. variable:: CPACK_RPM_PACKAGE_DEBUG
-#
-#  Toggle CPackRPM debug output.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be set when invoking cpack in order to trace debug information
-#  during CPack RPM run. For example you may launch CPack like this::
-#
-#   cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM
-#
-# .. variable:: CPACK_RPM_USER_BINARY_SPECFILE
-#
-#  A user provided spec file.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be set by the user in order to specify a USER binary spec file
-#  to be used by CPackRPM instead of generating the file.
-#  The specified file will be processed by configure_file( @ONLY).
-#  One can provide a component specific file by setting
-#  CPACK_RPM_<componentName>_USER_BINARY_SPECFILE.
-#
-# .. variable:: CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
-#
-#  Spec file template.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  If set CPack will generate a template for USER specified binary
-#  spec file and stop with an error. For example launch CPack like this::
-#
-#   cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM
-#
-#  The user may then use this file in order to hand-craft is own
-#  binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE.
-#
-# .. variable:: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
-#               CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to embed a pre (un)installation script in the spec file.
-#  The refered script file(s) will be read and directly
-#  put after the %pre or %preun section
-#  If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for
-#  each component can be overridden with
-#  CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE and
-#  CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE.
-#  One may verify which scriptlet has been included with::
-#
-#   rpm -qp --scripts  package.rpm
-#
-# .. variable:: CPACK_RPM_POST_INSTALL_SCRIPT_FILE
-#               CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to embed a post (un)installation script in the spec file.
-#  The refered script file(s) will be read and directly
-#  put after the %post or %postun section.
-#  If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for
-#  each component can be overridden with
-#  CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE and
-#  CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE.
-#  One may verify which scriptlet has been included with::
-#
-#   rpm -qp --scripts  package.rpm
-#
-# .. variable:: CPACK_RPM_USER_FILELIST
-#               CPACK_RPM_<COMPONENT>_USER_FILELIST
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to explicitly specify %(<directive>) file line
-#  in the spec file. Like %config(noreplace) or any other directive
-#  that be found in the %files section. Since CPackRPM is generating
-#  the list of files (and directories) the user specified files of
-#  the CPACK_RPM_<COMPONENT>_USER_FILELIST list will be removed from
-#  the generated list.
-#
-# .. variable:: CPACK_RPM_CHANGELOG_FILE
-#
-#  RPM changelog file.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to embed a changelog in the spec file.
-#  The refered file will be read and directly put after the %changelog
-#  section.
-#
-# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST
-#
-#  list of path to be excluded.
-#
-#  * Mandatory : NO
-#  * Default   : /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include
-#
-#  May be used to exclude path (directories or files) from the auto-generated
-#  list of paths discovered by CPack RPM. The defaut value contains a
-#  reasonable set of values if the variable is not defined by the user. If the
-#  variable is defined by the user then CPackRPM will NOT any of the default
-#  path.  If you want to add some path to the default list then you can use
-#  CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION variable.
-#
-# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION
-#
-#  additional list of path to be excluded.
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to add more exclude path (directories or files) from the initial
-#  default list of excluded paths. See CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST.
-#
-# .. variable:: CPACK_RPM_RELOCATION_PATHS
-#
-#  * Mandatory : NO
-#  * Default   : -
-#
-#  May be used to specify more than one relocation path per relocatable RPM.
-#  Variable contains a list of relocation paths that if relative are prefixed
-#  by the value of CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX or by the value of
-#  CPACK_PACKAGING_INSTALL_PREFIX if the component version is not provided.
-#  Variable is not component based as its content can be used to set a different
-#  path prefix for e.g. binary dir and documentation dir at the same time.
-#  Only prefixes that are required by a certain component are added to that
-#  component - component must contain at least one file/directory/symbolic link
-#  with CPACK_RPM_RELOCATION_PATHS prefix for a certain relocation path
-#  to be added. Package will not contain any relocation paths if there are no
-#  files/directories/symbolic links on any of the provided prefix locations.
-#  Packages that either do not contain any relocation paths or contain
-#  files/directories/symbolic links that are outside relocation paths print
-#  out an AUTHOR_WARNING that RPM will be partially relocatable.
-#
-# .. variable:: CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX
-#
-#  * Mandatory : NO
-#  * Default   : CPACK_PACKAGING_INSTALL_PREFIX
-#
-#  May be used to set per component CPACK_PACKAGING_INSTALL_PREFIX for
-#  relocatable RPM packages.
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Author: Eric Noulard with the help of Alexander Neundorf.
-
-function(cpack_rpm_prepare_relocation_paths)
-  # set appropriate prefix, remove possible trailing slash and convert backslashes to slashes
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX)
-    file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX}" PATH_PREFIX)
-  else()
-    file(TO_CMAKE_PATH "${CPACK_PACKAGING_INSTALL_PREFIX}" PATH_PREFIX)
-  endif()
-
-  set(RPM_RELOCATION_PATHS "${CPACK_RPM_RELOCATION_PATHS}")
-  list(REMOVE_DUPLICATES RPM_RELOCATION_PATHS)
-
-  # set base path prefix
-  if(EXISTS "${WDIR}/${PATH_PREFIX}")
-    set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PATH_PREFIX}\n")
-    list(APPEND RPM_USED_PACKAGE_PREFIXES "${PATH_PREFIX}")
-  endif()
-
-  # set other path prefixes
-  foreach(RELOCATION_PATH ${RPM_RELOCATION_PATHS})
-    if(IS_ABSOLUTE "${RELOCATION_PATH}")
-      set(PREPARED_RELOCATION_PATH "${RELOCATION_PATH}")
-    else()
-      set(PREPARED_RELOCATION_PATH "${PATH_PREFIX}/${RELOCATION_PATH}")
-    endif()
-
-    if(EXISTS "${WDIR}/${PREPARED_RELOCATION_PATH}")
-      set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PREPARED_RELOCATION_PATH}\n")
-      list(APPEND RPM_USED_PACKAGE_PREFIXES "${PREPARED_RELOCATION_PATH}")
-    endif()
-  endforeach()
-
-  # warn about all the paths that are not relocatable
-  cmake_policy(PUSH)
-    # Tell file(GLOB_RECURSE) not to follow directory symlinks
-    # even if the project does not set this policy to NEW.
-    cmake_policy(SET CMP0009 NEW)
-    file(GLOB_RECURSE FILE_PATHS_ "${WDIR}/*")
-  cmake_policy(POP)
-  foreach(TMP_PATH ${FILE_PATHS_})
-    string(LENGTH "${WDIR}" WDIR_LEN)
-    string(SUBSTRING "${TMP_PATH}" ${WDIR_LEN} -1 TMP_PATH)
-    unset(TMP_PATH_FOUND_)
-
-    foreach(RELOCATION_PATH ${RPM_USED_PACKAGE_PREFIXES})
-      file(RELATIVE_PATH REL_PATH_ "${RELOCATION_PATH}" "${TMP_PATH}")
-      string(SUBSTRING "${REL_PATH_}" 0 2 PREFIX_)
-
-      if(NOT "${PREFIX_}" STREQUAL "..")
-        set(TPM_PATH_FOUND_ TRUE)
-        break()
-      endif()
-    endforeach()
-
-    if(NOT TPM_PATH_FOUND_)
-      message(AUTHOR_WARNING "CPackRPM:Warning: Path ${TMP_PATH} is not on one of the relocatable paths! Package will be partially relocatable.")
-    endif()
-  endforeach()
-
-  set(RPM_USED_PACKAGE_PREFIXES "${RPM_USED_PACKAGE_PREFIXES}" PARENT_SCOPE)
-  set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}" PARENT_SCOPE)
-endfunction()
-
-if(CMAKE_BINARY_DIR)
-  message(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.")
-endif()
-
-if(NOT UNIX)
-  message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.")
-endif()
-
-# rpmbuild is the basic command for building RPM package
-# it may be a simple (symbolic) link to rpm command.
-find_program(RPMBUILD_EXECUTABLE rpmbuild)
-
-# Check version of the rpmbuild tool this would be easier to
-# track bugs with users and CPackRPM debug mode.
-# We may use RPM version in order to check for available version dependent features
-if(RPMBUILD_EXECUTABLE)
-  execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version
-                  OUTPUT_VARIABLE _TMP_VERSION
-                  ERROR_QUIET
-                  OUTPUT_STRIP_TRAILING_WHITESPACE)
-  string(REGEX REPLACE "^.* " ""
-         RPMBUILD_EXECUTABLE_VERSION
-         ${_TMP_VERSION})
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>")
-  endif()
-endif()
-
-if(NOT RPMBUILD_EXECUTABLE)
-  message(FATAL_ERROR "RPM package requires rpmbuild executable")
-endif()
-
-# Display lsb_release output if DEBUG mode enable
-# This will help to diagnose problem with CPackRPM
-# because we will know on which kind of Linux we are
-if(CPACK_RPM_PACKAGE_DEBUG)
-  find_program(LSB_RELEASE_EXECUTABLE lsb_release)
-  if(LSB_RELEASE_EXECUTABLE)
-    execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a
-                    OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT
-                    ERROR_QUIET
-                    OUTPUT_STRIP_TRAILING_WHITESPACE)
-    string(REGEX REPLACE "\n" ", "
-           LSB_RELEASE_OUTPUT
-           ${_TMP_LSB_RELEASE_OUTPUT})
-  else ()
-    set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!")
-  endif()
-  message("CPackRPM:Debug: LSB_RELEASE  = ${LSB_RELEASE_OUTPUT}")
-endif()
-
-# We may use RPM version in the future in order
-# to shut down warning about space in buildtree
-# some recent RPM version should support space in different places.
-# not checked [yet].
-if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*")
-  message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.")
-endif()
-
-# If rpmbuild is found
-# we try to discover alien since we may be on non RPM distro like Debian.
-# In this case we may try to to use more advanced features
-# like generating RPM directly from DEB using alien.
-# FIXME feature not finished (yet)
-find_program(ALIEN_EXECUTABLE alien)
-if(ALIEN_EXECUTABLE)
-  message(STATUS "alien found, we may be on a Debian based distro.")
-endif()
-
-# Are we packaging components ?
-if(CPACK_RPM_PACKAGE_COMPONENT)
-  set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}")
-  string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER)
-else()
-  set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "")
-endif()
-
-set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}")
-
-#
-# Use user-defined RPM specific variables value
-# or generate reasonable default value from
-# CPACK_xxx generic values.
-# The variables comes from the needed (mandatory or not)
-# values found in the RPM specification file aka ".spec" file.
-# The variables which may/should be defined are:
-#
-
-# CPACK_RPM_PACKAGE_SUMMARY (mandatory)
-
-# CPACK_RPM_PACKAGE_SUMMARY_ is used only locally so that it can be unset each time before use otherwise
-# component packaging could leak variable content between components
-unset(CPACK_RPM_PACKAGE_SUMMARY_)
-if(CPACK_RPM_PACKAGE_SUMMARY)
-  set(CPACK_RPM_PACKAGE_SUMMARY_ ${CPACK_RPM_PACKAGE_SUMMARY})
-  unset(CPACK_RPM_PACKAGE_SUMMARY)
-endif()
-
-#Check for component summary first.
-#If not set, it will use regular package summary logic.
-if(CPACK_RPM_PACKAGE_COMPONENT)
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY)
-    set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY})
-  endif()
-endif()
-
-if(NOT CPACK_RPM_PACKAGE_SUMMARY)
-  if(CPACK_RPM_PACKAGE_SUMMARY_)
-    set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_})
-  elseif(CPACK_PACKAGE_DESCRIPTION_SUMMARY)
-    set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
-  else()
-    # if neither var is defined lets use the name as summary
-    string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY)
-  endif()
-endif()
-
-# CPACK_RPM_PACKAGE_NAME (mandatory)
-if(NOT CPACK_RPM_PACKAGE_NAME)
-  string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME)
-endif()
-
-# CPACK_RPM_PACKAGE_VERSION (mandatory)
-if(NOT CPACK_RPM_PACKAGE_VERSION)
-  if(NOT CPACK_PACKAGE_VERSION)
-    message(FATAL_ERROR "RPM package requires a package version")
-  endif()
-  set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION})
-endif()
-# Replace '-' in version with '_'
-# '-' character is  an Illegal RPM version character
-# it is illegal because it is used to separate
-# RPM "Version" from RPM "Release"
-string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION})
-
-# CPACK_RPM_PACKAGE_ARCHITECTURE (optional)
-if(CPACK_RPM_PACKAGE_ARCHITECTURE)
-  set(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
-  endif()
-else()
-  set(TMP_RPM_BUILDARCH "")
-endif()
-
-# CPACK_RPM_PACKAGE_RELEASE
-# The RPM release is the numbering of the RPM package ITSELF
-# this is the version of the PACKAGING and NOT the version
-# of the CONTENT of the package.
-# You may well need to generate a new RPM package release
-# without changing the version of the packaged software.
-# This is the case when the packaging is buggy (not) the software :=)
-# If not set, 1 is a good candidate
-if(NOT CPACK_RPM_PACKAGE_RELEASE)
-  set(CPACK_RPM_PACKAGE_RELEASE 1)
-endif()
-
-# CPACK_RPM_PACKAGE_LICENSE
-if(NOT CPACK_RPM_PACKAGE_LICENSE)
-  set(CPACK_RPM_PACKAGE_LICENSE "unknown")
-endif()
-
-# CPACK_RPM_PACKAGE_GROUP
-if(NOT CPACK_RPM_PACKAGE_GROUP)
-  set(CPACK_RPM_PACKAGE_GROUP "unknown")
-endif()
-
-# CPACK_RPM_PACKAGE_VENDOR
-if(NOT CPACK_RPM_PACKAGE_VENDOR)
-  if(CPACK_PACKAGE_VENDOR)
-    set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}")
-  else()
-    set(CPACK_RPM_PACKAGE_VENDOR "unknown")
-  endif()
-endif()
-
-# CPACK_RPM_PACKAGE_SOURCE
-# The name of the source tarball in case we generate a source RPM
-
-# CPACK_RPM_PACKAGE_DESCRIPTION
-# The variable content may be either
-#   - explicitly given by the user or
-#   - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE
-#     if it is defined
-#   - set to a default value
-#
-
-# CPACK_RPM_PACKAGE_DESCRIPTION_ is used only locally so that it can be unset each time before use otherwise
-# component packaging could leak variable content between components
-unset(CPACK_RPM_PACKAGE_DESCRIPTION_)
-if(CPACK_RPM_PACKAGE_DESCRIPTION)
-  set(CPACK_RPM_PACKAGE_DESCRIPTION_ ${CPACK_RPM_PACKAGE_DESCRIPTION})
-  unset(CPACK_RPM_PACKAGE_DESCRIPTION)
-endif()
-
-#Check for a component description first.
-#If not set, it will use regular package description logic.
-if(CPACK_RPM_PACKAGE_COMPONENT)
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION)
-    set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION})
-  elseif(CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION)
-    set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION})
-  endif()
-endif()
-
-if(NOT CPACK_RPM_PACKAGE_DESCRIPTION)
-  if(CPACK_RPM_PACKAGE_DESCRIPTION_)
-    set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_})
-  elseif(CPACK_PACKAGE_DESCRIPTION_FILE)
-    file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION)
-  else ()
-    set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available")
-  endif ()
-endif ()
-
-# CPACK_RPM_COMPRESSION_TYPE
-#
-if (CPACK_RPM_COMPRESSION_TYPE)
-   if(CPACK_RPM_PACKAGE_DEBUG)
-     message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}")
-   endif()
-   if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma")
-     set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio")
-   endif()
-   if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz")
-     set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio")
-   endif()
-   if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2")
-     set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio")
-   endif()
-   if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip")
-     set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio")
-   endif()
-else()
-   set(CPACK_RPM_COMPRESSION_TYPE_TMP "")
-endif()
-
-if(CPACK_PACKAGE_RELOCATABLE)
-  set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE)
-endif()
-if(CPACK_RPM_PACKAGE_RELOCATABLE)
-  unset(TMP_RPM_PREFIXES)
-
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: Trying to build a relocatable package")
-  endif()
-  if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON"))
-    message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.")
-  else()
-    set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files)
-    cpack_rpm_prepare_relocation_paths()
-  endif()
-endif()
-
-# Check if additional fields for RPM spec header are given
-# There may be some COMPONENT specific variables as well
-# If component specific var is not provided we use the global one
-# for each component
-foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN)
-    if(CPACK_RPM_PACKAGE_DEBUG)
-      message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}")
-    endif()
-    if(CPACK_RPM_PACKAGE_COMPONENT)
-        if(DEFINED CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER})
-            if(CPACK_RPM_PACKAGE_DEBUG)
-              message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}")
-            endif()
-            set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}})
-        else()
-            if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER})
-              if(CPACK_RPM_PACKAGE_DEBUG)
-                message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined")
-                message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}")
-              endif()
-              set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}})
-            endif()
-        endif()
-    else()
-        if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER})
-          if(CPACK_RPM_PACKAGE_DEBUG)
-            message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}")
-          endif()
-          set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}})
-        endif()
-    endif()
-
-  # Do not forget to unset previously set header (from previous component)
-  unset(TMP_RPM_${_RPM_SPEC_HEADER})
-  # Treat the RPM Spec keyword iff it has been properly defined
-  if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP)
-    # Transform NAME --> Name e.g. PROVIDES --> Provides
-    # The Upper-case first letter and lowercase tail is the
-    # appropriate value required in the final RPM spec file.
-    string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL)
-    string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL)
-    string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME)
-    set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}")
-    # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file.
-    set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN)
-    list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND)
-    if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1)
-      string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}")
-      set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})")
-    endif()
-    if(CPACK_RPM_PACKAGE_DEBUG)
-      message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}")
-    endif()
-    set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}")
-    unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP)
-  endif()
-endforeach()
-
-# CPACK_RPM_SPEC_INSTALL_POST
-# May be used to define a RPM post intallation script
-# for example setting it to "/bin/true" may prevent
-# rpmbuild from stripping binaries.
-if(CPACK_RPM_SPEC_INSTALL_POST)
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}")
-  endif()
-  set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}")
-endif()
-
-# CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE)
-# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE)
-# May be used to embed a post (un)installation script in the spec file.
-# The refered script file(s) will be read and directly
-# put after the %post or %postun section
-if(CPACK_RPM_PACKAGE_COMPONENT)
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE)
-    set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_INSTALL_SCRIPT_FILE})
-  else()
-    set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
-  endif()
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE)
-    set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_POST_UNINSTALL_SCRIPT_FILE})
-  else()
-    set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
-  endif()
-else()
-  set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE})
-  set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE})
-endif()
-
-# Handle post-install file if it has been specified
-if(CPACK_RPM_POST_INSTALL_READ_FILE)
-  if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE})
-    file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL)
-  else()
-    message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring")
-  endif()
-else()
-  # reset SPEC var value if no post install file has been specified
-  # (either globally or component-wise)
-  set(CPACK_RPM_SPEC_POSTINSTALL "")
-endif()
-
-# Handle post-uninstall file if it has been specified
-if(CPACK_RPM_POST_UNINSTALL_READ_FILE)
-  if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE})
-    file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL)
-  else()
-    message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring")
-  endif()
-else()
-  # reset SPEC var value if no post uninstall file has been specified
-  # (either globally or component-wise)
-  set(CPACK_RPM_SPEC_POSTUNINSTALL "")
-endif()
-
-# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE)
-# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE)
-# May be used to embed a pre (un)installation script in the spec file.
-# The refered script file(s) will be read and directly
-# put after the %pre or %preun section
-if(CPACK_RPM_PACKAGE_COMPONENT)
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE)
-    set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_INSTALL_SCRIPT_FILE})
-  else()
-    set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
-  endif()
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE)
-    set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PRE_UNINSTALL_SCRIPT_FILE})
-  else()
-    set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
-  endif()
-else()
-  set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE})
-  set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE})
-endif()
-
-# Handle pre-install file if it has been specified
-if(CPACK_RPM_PRE_INSTALL_READ_FILE)
-  if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE})
-    file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL)
-  else()
-    message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring")
-  endif()
-else()
-  # reset SPEC var value if no pre-install file has been specified
-  # (either globally or component-wise)
-  set(CPACK_RPM_SPEC_PREINSTALL "")
-endif()
-
-# Handle pre-uninstall file if it has been specified
-if(CPACK_RPM_PRE_UNINSTALL_READ_FILE)
-  if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE})
-    file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL)
-  else()
-    message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring")
-  endif()
-else()
-  # reset SPEC var value if no pre-uninstall file has been specified
-  # (either globally or component-wise)
-  set(CPACK_RPM_SPEC_PREUNINSTALL "")
-endif()
-
-# CPACK_RPM_CHANGELOG_FILE
-# May be used to embed a changelog in the spec file.
-# The refered file will be read and directly put after the %changelog section
-if(CPACK_RPM_CHANGELOG_FILE)
-  if(EXISTS ${CPACK_RPM_CHANGELOG_FILE})
-    file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG)
-  else()
-    message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring")
-  endif()
-else()
-  set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard <eric.noulard@gmail.com> - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n  Generated by CPack RPM (no Changelog file were provided)")
-endif()
-
-# CPACK_RPM_SPEC_MORE_DEFINE
-# This is a generated spec rpm file spaceholder
-if(CPACK_RPM_SPEC_MORE_DEFINE)
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}")
-  endif()
-endif()
-
-# Now we may create the RPM build tree structure
-set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}")
-message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}")
-# Prepare RPM build tree
-file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR})
-file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp)
-file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD)
-file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS)
-file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES)
-file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS)
-file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS)
-
-#set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm")
-set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}")
-# it seems rpmbuild can't handle spaces in the path
-# neither escaping (as below) nor putting quotes around the path seem to help
-#string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
-set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
-
-# if we are creating a relocatable package, omit parent directories of
-# CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list"
-# which is passed to the find command that generates the content-list
-if(CPACK_RPM_PACKAGE_RELOCATABLE)
-  # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are
-  # destinct parent paths of other relocation paths and remove the
-  # final element (so the install-prefix dir itself is not omitted
-  # from the RPM's content-list)
-  list(SORT RPM_USED_PACKAGE_PREFIXES)
-  set(_DISTINCT_PATH "NOT_SET")
-  foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES})
-    if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*")
-      set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}")
-
-      string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS ".${_RPM_RELOCATION_PREFIX}")
-      list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1)
-      unset(_TMP_LIST)
-      # Now generate all of the parent dirs of the relocation path
-      foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS})
-        list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}")
-        string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}")
-        list(FIND _RPM_DIRS_TO_OMIT "${_OMIT_DIR}" _DUPLICATE_FOUND)
-        if(_DUPLICATE_FOUND EQUAL -1)
-          set(_OMIT_DIR "-o -path ${_OMIT_DIR}")
-          separate_arguments(_OMIT_DIR)
-          list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR})
-        endif()
-      endforeach()
-    endif()
-  endforeach()
-endif()
-
-if (CPACK_RPM_PACKAGE_DEBUG)
-   message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}")
-endif()
-
-if (NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST)
-  set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include)
-  if (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION)
-    message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.")
-    list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}")
-  endif()
-endif()
-
-if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST)
-  if (CPACK_RPM_PACKAGE_DEBUG)
-   message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}")
- endif()
-  foreach(_DIR ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST})
-    list(APPEND _RPM_DIRS_TO_OMIT "-o;-path;.${_DIR}")
-  endforeach()
-endif()
-if (CPACK_RPM_PACKAGE_DEBUG)
-   message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}")
-endif()
-
-# Use files tree to construct files command (spec file)
-# We should not forget to include symlinks (thus -o -type l)
-# We should include directory as well (thus -type d)
-#   but not the main local dir "." (thus -a -not -name ".")
-# We must remove the './' due to the local search and escape the
-# file name by enclosing it between double quotes (thus the sed)
-# Then we must authorize any man pages extension (adding * at the end)
-# because rpmbuild may automatically compress those files
-execute_process(COMMAND find . -type f -o -type l -o (-type d -a -not ( -name "." ${_RPM_DIRS_TO_OMIT} ) )
-                COMMAND sed s:.*/man.*/.*:&*:
-                COMMAND sed s/\\.\\\(.*\\\)/\"\\1\"/
-                WORKING_DIRECTORY "${WDIR}"
-                OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES)
-
-# In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_<COMPONENT>
-#                   into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
-#         otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES
-# This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling
-if(CPACK_RPM_PACKAGE_COMPONENT)
-  if(CPACK_ABSOLUTE_DESTINATION_FILES)
-   set(COMPONENT_FILES_TAG "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}")
-   set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}")
-   if(CPACK_RPM_PACKAGE_DEBUG)
-     message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>")
-     message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}")
-   endif()
-  endif()
-else()
-  if(CPACK_ABSOLUTE_DESTINATION_FILES)
-    set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}")
-  endif()
-endif()
-
-# In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM_<COMPONENT>_USER_FILELIST.
-if(CPACK_RPM_PACKAGE_COMPONENT)
-  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST)
-    set(CPACK_RPM_USER_FILELIST_INTERNAL ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST})
-    if(CPACK_RPM_PACKAGE_DEBUG)
-      message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>")
-      message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}")
-    endif()
-  else()
-    set(CPACK_RPM_USER_FILELIST_INTERNAL "")
-  endif()
-else()
-  if(CPACK_RPM_USER_FILELIST)
-    set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}")
-  else()
-    set(CPACK_RPM_USER_FILELIST_INTERNAL "")
-  endif()
-endif()
-
-# Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL
-# Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
-#                      or CPACK_RPM_INSTALL_FILES,
-# hence it must be done before these auto-generated lists are processed.
-if(CPACK_RPM_USER_FILELIST_INTERNAL)
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>")
-  endif()
-
-  # Create CMake list from CPACK_RPM_INSTALL_FILES
-  string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
-  string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST
-                          "${CPACK_RPM_INSTALL_FILES_LIST}")
-  string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST
-                          "${CPACK_RPM_INSTALL_FILES_LIST}")
-
-  set(CPACK_RPM_USER_INSTALL_FILES "")
-  foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL)
-    string(REGEX REPLACE "%[A-Za-z0-9\(\),-]* " "" F_PATH ${F})
-    string(REGEX MATCH "%[A-Za-z0-9\(\),-]*" F_PREFIX ${F})
-
-    if(CPACK_RPM_PACKAGE_DEBUG)
-      message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>")
-    endif()
-    if(F_PREFIX)
-      set(F_PREFIX "${F_PREFIX} ")
-    endif()
-    # Rebuild the user list file
-    set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n")
-
-    # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
-    list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH})
-    # ABSOLUTE destination files list may not exists at all
-    if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
-      list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH})
-    endif()
-
-  endforeach()
-
-  # Rebuild CPACK_RPM_INSTALL_FILES
-  set(CPACK_RPM_INSTALL_FILES "")
-  foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
-    set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n")
-  endforeach()
-else()
-  set(CPACK_RPM_USER_INSTALL_FILES "")
-endif()
-
-if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}")
-  endif()
-  # Remove trailing space
-  string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
-  # Transform endline separated - string into CMake List
-  string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
-  # Remove unecessary quotes
-  string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
-  # Remove ABSOLUTE install file from INSTALL FILE LIST
-  list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL})
-  # Rebuild INSTALL_FILES
-  set(CPACK_RPM_INSTALL_FILES "")
-  foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
-    set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n")
-  endforeach()
-  # Build ABSOLUTE_INSTALL_FILES
-  set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "")
-  foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
-    set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n")
-  endforeach()
-  if(CPACK_RPM_PACKAGE_DEBUG)
-    message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}")
-    message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}")
-  endif()
-else()
-  # reset vars in order to avoid leakage of value(s) from one component to another
-  set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "")
-endif()
-
-# Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir
-# This is necessary to avoid duplicate files since rpmbuild do
-# recursion on its own when encountering a pathname which is a directory
-# which is not flagged as %dir
-string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
-string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST
-                        "${CPACK_RPM_INSTALL_FILES_LIST}")
-string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST
-                        "${CPACK_RPM_INSTALL_FILES_LIST}")
-set(CPACK_RPM_INSTALL_FILES "")
-foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
-  if(IS_DIRECTORY "${WDIR}/${F}")
-    set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}%dir \"${F}\"\n")
-  else()
-    set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n")
-  endif()
-endforeach()
-set(CPACK_RPM_INSTALL_FILES_LIST "")
-
-# The name of the final spec file to be used by rpmbuild
-set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec")
-
-# Print out some debug information if we were asked for that
-if(CPACK_RPM_PACKAGE_DEBUG)
-   message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY          = ${CPACK_TOPLEVEL_DIRECTORY}")
-   message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG                = ${CPACK_TOPLEVEL_TAG}")
-   message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY         = ${CPACK_TEMPORARY_DIRECTORY}")
-   message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME            = ${CPACK_OUTPUT_FILE_NAME}")
-   message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH            = ${CPACK_OUTPUT_FILE_PATH}")
-   message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME           = ${CPACK_PACKAGE_FILE_NAME}")
-   message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE         = ${CPACK_RPM_BINARY_SPECFILE}")
-   message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY   = ${CPACK_PACKAGE_INSTALL_DIRECTORY}")
-   message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}")
-endif()
-
-# protect @ in pathname in order to avoid their
-# interpretation during the configure_file step
-set(CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES}")
-set(PROTECTED_AT "@")
-string(REPLACE "@" "\@PROTECTED_AT\@" CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES_LIST}")
-set(CPACK_RPM_INSTALL_FILES_LIST "")
-
-#
-# USER generated/provided spec file handling.
-#
-
-# We can have a component specific spec file.
-if(CPACK_RPM_PACKAGE_COMPONENT AND CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE)
-  set(CPACK_RPM_USER_BINARY_SPECFILE ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE})
-endif()
-
-# We should generate a USER spec file template:
-#  - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
-#  - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE
-if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)
-   file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
-      "# -*- rpm-spec -*-
-BuildRoot:      \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@
-Summary:        \@CPACK_RPM_PACKAGE_SUMMARY\@
-Name:           \@CPACK_RPM_PACKAGE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_NAME\@
-Version:        \@CPACK_RPM_PACKAGE_VERSION\@
-Release:        \@CPACK_RPM_PACKAGE_RELEASE\@
-License:        \@CPACK_RPM_PACKAGE_LICENSE\@
-Group:          \@CPACK_RPM_PACKAGE_GROUP\@
-Vendor:         \@CPACK_RPM_PACKAGE_VENDOR\@
-\@TMP_RPM_URL\@
-\@TMP_RPM_REQUIRES\@
-\@TMP_RPM_REQUIRES_PRE\@
-\@TMP_RPM_REQUIRES_POST\@
-\@TMP_RPM_REQUIRES_PREUN\@
-\@TMP_RPM_REQUIRES_POSTUN\@
-\@TMP_RPM_PROVIDES\@
-\@TMP_RPM_OBSOLETES\@
-\@TMP_RPM_CONFLICTS\@
-\@TMP_RPM_AUTOPROV\@
-\@TMP_RPM_AUTOREQ\@
-\@TMP_RPM_AUTOREQPROV\@
-\@TMP_RPM_BUILDARCH\@
-\@TMP_RPM_PREFIXES\@
-
-%define _rpmdir \@CPACK_RPM_DIRECTORY\@
-%define _rpmfilename \@CPACK_RPM_FILE_NAME\@
-%define _unpackaged_files_terminate_build 0
-%define _topdir \@CPACK_RPM_DIRECTORY\@
-\@TMP_RPM_SPEC_INSTALL_POST\@
-\@CPACK_RPM_SPEC_MORE_DEFINE\@
-\@CPACK_RPM_COMPRESSION_TYPE_TMP\@
-
-%description
-\@CPACK_RPM_PACKAGE_DESCRIPTION\@
-
-# This is a shortcutted spec file generated by CMake RPM generator
-# we skip _install step because CPack does that for us.
-# We do only save CPack installed tree in _prepr
-# and then restore it in build.
-%prep
-mv $RPM_BUILD_ROOT \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\"
-
-#p build
-
-%install
-if [ -e $RPM_BUILD_ROOT ];
-then
-  rm -rf $RPM_BUILD_ROOT
-fi
-mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT
-
-%clean
-
-%post
-\@CPACK_RPM_SPEC_POSTINSTALL\@
-
-%postun
-\@CPACK_RPM_SPEC_POSTUNINSTALL\@
-
-%pre
-\@CPACK_RPM_SPEC_PREINSTALL\@
-
-%preun
-\@CPACK_RPM_SPEC_PREUNINSTALL\@
-
-%files
-%defattr(-,root,root,-)
-\@CPACK_RPM_INSTALL_FILES\@
-\@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@
-\@CPACK_RPM_USER_INSTALL_FILES\@
-
-%changelog
-\@CPACK_RPM_SPEC_CHANGELOG\@
-")
-  # Stop here if we were asked to only generate a template USER spec file
-  # The generated file may then be used as a template by user who wants
-  # to customize their own spec file.
-  if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE)
-     message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in")
-  endif()
-endif()
-
-# After that we may either use a user provided spec file
-# or generate one using appropriate variables value.
-if(CPACK_RPM_USER_BINARY_SPECFILE)
-  # User may have specified SPECFILE just use it
-  message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}")
-  # The user provided file is processed for @var replacement
-  configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
-else()
-  # No User specified spec file, will use the generated spec file
-  message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}")
-  # Note the just created file is processed for @var replacement
-  configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
-endif()
-
-# remove AT protection
-unset(PROTECTED_AT)
-
-if(RPMBUILD_EXECUTABLE)
-  # Now call rpmbuild using the SPECFILE
-  execute_process(
-    COMMAND "${RPMBUILD_EXECUTABLE}" -bb
-            --define "_topdir ${CPACK_RPM_DIRECTORY}"
-            --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
-            "${CPACK_RPM_BINARY_SPECFILE}"
-    WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
-    RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT
-    ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err"
-    OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out")
-  if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT)
-    file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err RPMBUILDERR)
-    file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out RPMBUILDOUT)
-    message("CPackRPM:Debug: You may consult rpmbuild logs in: ")
-    message("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err")
-    message("CPackRPM:Debug: *** ${RPMBUILDERR} ***")
-    message("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out")
-    message("CPackRPM:Debug: *** ${RPMBUILDERR} ***")
-  endif()
-else()
-  if(ALIEN_EXECUTABLE)
-    message(FATAL_ERROR "RPM packaging through alien not done (yet)")
-  endif()
-endif()
-
-# reset variables from temporary variables
-if(CPACK_RPM_PACKAGE_SUMMARY_)
-  set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_})
-else()
-  unset(CPACK_RPM_PACKAGE_SUMMARY)
-endif()
-if(CPACK_RPM_PACKAGE_DESCRIPTION_)
-  set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_})
-else()
-  unset(CPACK_RPM_PACKAGE_DESCRIPTION)
-endif()
diff --git a/share/cmake-3.2/Modules/CPackWIX.cmake b/share/cmake-3.2/Modules/CPackWIX.cmake
deleted file mode 100644
index 0a47e19..0000000
--- a/share/cmake-3.2/Modules/CPackWIX.cmake
+++ /dev/null
@@ -1,264 +0,0 @@
-#.rst:
-# CPackWIX
-# --------
-#
-# CPack WiX generator specific options
-#
-# Variables specific to CPack WiX generator
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The following variables are specific to the installers built on
-# Windows using WiX.
-#
-# .. variable:: CPACK_WIX_UPGRADE_GUID
-#
-#  Upgrade GUID (``Product/@UpgradeCode``)
-#
-#  Will be automatically generated unless explicitly provided.
-#
-#  It should be explicitly set to a constant generated gloabally unique
-#  identifier (GUID) to allow your installers to replace existing
-#  installations that use the same GUID.
-#
-#  You may for example explicitly set this variable in your
-#  CMakeLists.txt to the value that has been generated per default.  You
-#  should not use GUIDs that you did not generate yourself or which may
-#  belong to other projects.
-#
-#  A GUID shall have the following fixed length syntax::
-#
-#   XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
-#
-#  (each X represents an uppercase hexadecimal digit)
-#
-# .. variable:: CPACK_WIX_PRODUCT_GUID
-#
-#  Product GUID (``Product/@Id``)
-#
-#  Will be automatically generated unless explicitly provided.
-#
-#  If explicitly provided this will set the Product Id of your installer.
-#
-#  The installer will abort if it detects a pre-existing installation that
-#  uses the same GUID.
-#
-#  The GUID shall use the syntax described for CPACK_WIX_UPGRADE_GUID.
-#
-# .. variable:: CPACK_WIX_LICENSE_RTF
-#
-#  RTF License File
-#
-#  If CPACK_RESOURCE_FILE_LICENSE has an .rtf extension it is used as-is.
-#
-#  If CPACK_RESOURCE_FILE_LICENSE has an .txt extension it is implicitly
-#  converted to RTF by the WiX Generator.
-#  The expected encoding of the .txt file is UTF-8.
-#
-#  With CPACK_WIX_LICENSE_RTF you can override the license file used by the
-#  WiX Generator in case CPACK_RESOURCE_FILE_LICENSE is in an unsupported
-#  format or the .txt -> .rtf conversion does not work as expected.
-#
-# .. variable:: CPACK_WIX_PRODUCT_ICON
-#
-#  The Icon shown next to the program name in Add/Remove programs.
-#
-#  If set, this icon is used in place of the default icon.
-#
-# .. variable:: CPACK_WIX_UI_REF
-#
-#  This variable allows you to override the Id of the ``<UIRef>`` element
-#  in the WiX template.
-#
-#  The default is ``WixUI_InstallDir`` in case no CPack components have
-#  been defined and ``WixUI_FeatureTree`` otherwise.
-#
-# .. variable:: CPACK_WIX_UI_BANNER
-#
-#  The bitmap will appear at the top of all installer pages other than the
-#  welcome and completion dialogs.
-#
-#  If set, this image will replace the default banner image.
-#
-#  This image must be 493 by 58 pixels.
-#
-# .. variable:: CPACK_WIX_UI_DIALOG
-#
-#  Background bitmap used on the welcome and completion dialogs.
-#
-#  If this variable is set, the installer will replace the default dialog
-#  image.
-#
-#  This image must be 493 by 312 pixels.
-#
-# .. variable:: CPACK_WIX_PROGRAM_MENU_FOLDER
-#
-#  Start menu folder name for launcher.
-#
-#  If this variable is not set, it will be initialized with CPACK_PACKAGE_NAME
-#
-# .. variable:: CPACK_WIX_CULTURES
-#
-#  Language(s) of the installer
-#
-#  Languages are compiled into the WixUI extension library.  To use them,
-#  simply provide the name of the culture.  If you specify more than one
-#  culture identifier in a comma or semicolon delimited list, the first one
-#  that is found will be used.  You can find a list of supported languages at:
-#  http://wix.sourceforge.net/manual-wix3/WixUI_localization.htm
-#
-# .. variable:: CPACK_WIX_TEMPLATE
-#
-#  Template file for WiX generation
-#
-#  If this variable is set, the specified template will be used to generate
-#  the WiX wxs file.  This should be used if further customization of the
-#  output is required.
-#
-#  If this variable is not set, the default MSI template included with CMake
-#  will be used.
-#
-# .. variable:: CPACK_WIX_PATCH_FILE
-#
-#  Optional XML file with fragments to be inserted into generated WiX sources
-#
-#  This optional variable can be used to specify an XML file that the
-#  WiX generator will use to inject fragments into its generated
-#  source files.
-#
-#  Patch files understood by the CPack WiX generator
-#  roughly follow this RELAX NG compact schema:
-#
-#  .. code-block:: none
-#
-#     start = CPackWiXPatch
-#
-#     CPackWiXPatch = element CPackWiXPatch { CPackWiXFragment* }
-#
-#     CPackWiXFragment = element CPackWiXFragment
-#     {
-#         attribute Id { string },
-#         fragmentContent*
-#     }
-#
-#     fragmentContent = element * - CPackWiXFragment
-#     {
-#         (attribute * { text } | text | fragmentContent)*
-#     }
-#
-#  Currently fragments can be injected into most
-#  Component, File and Directory elements.
-#
-#  The following example illustrates how this works.
-#
-#  Given that the WiX generator creates the following XML element:
-#
-#  .. code-block:: xml
-#
-#     <Component Id="CM_CP_applications.bin.my_libapp.exe" Guid="*"/>
-#
-#  The following XML patch file may be used to inject an Environment element
-#  into it:
-#
-#  .. code-block:: xml
-#
-#     <CPackWiXPatch>
-#       <CPackWiXFragment Id="CM_CP_applications.bin.my_libapp.exe">
-#         <Environment Id="MyEnvironment" Action="set"
-#           Name="MyVariableName" Value="MyVariableValue"/>
-#       </CPackWiXFragment>
-#     </CPackWiXPatch>
-#
-# .. variable:: CPACK_WIX_EXTRA_SOURCES
-#
-#  Extra WiX source files
-#
-#  This variable provides an optional list of extra WiX source files (.wxs)
-#  that should be compiled and linked.  The full path to source files is
-#  required.
-#
-# .. variable:: CPACK_WIX_EXTRA_OBJECTS
-#
-#  Extra WiX object files or libraries
-#
-#  This variable provides an optional list of extra WiX object (.wixobj)
-#  and/or WiX library (.wixlib) files.  The full path to objects and libraries
-#  is required.
-#
-# .. variable:: CPACK_WIX_EXTENSIONS
-#
-#  This variable provides a list of additional extensions for the WiX
-#  tools light and candle.
-#
-# .. variable:: CPACK_WIX_<TOOL>_EXTENSIONS
-#
-#  This is the tool specific version of CPACK_WIX_EXTENSIONS.
-#  ``<TOOL>`` can be either LIGHT or CANDLE.
-#
-# .. variable:: CPACK_WIX_<TOOL>_EXTRA_FLAGS
-#
-#  This list variable allows you to pass additional
-#  flags to the WiX tool ``<TOOL>``.
-#
-#  Use it at your own risk.
-#  Future versions of CPack may generate flags which may be in conflict
-#  with your own flags.
-#
-#  ``<TOOL>`` can be either LIGHT or CANDLE.
-#
-# .. variable:: CPACK_WIX_CMAKE_PACKAGE_REGISTRY
-#
-#  If this variable is set the generated installer will create
-#  an entry in the windows registry key
-#  ``HKEY_LOCAL_MACHINE\Software\Kitware\CMake\Packages\<package>``
-#  The value for ``<package>`` is provided by this variable.
-#
-#  Assuming you also install a CMake configuration file this will
-#  allow other CMake projects to find your package with
-#  the :command:`find_package` command.
-#
-# .. variable:: CPACK_WIX_PROPERTY_<PROPERTY>
-#
-#  This variable can be used to provide a value for
-#  the Windows Installer property ``<PROPERTY>``
-#
-#  The follwing list contains some example properties that can be used to
-#  customize information under
-#  "Programs and Features" (also known as "Add or Remove Programs")
-#
-#  * ARPCOMMENTS - Comments
-#  * ARPHELPLINK - Help and support information URL
-#  * ARPURLINFOABOUT - General information URL
-#  * URLUPDATEINFO - Update information URL
-#  * ARPHELPTELEPHONE - Help and support telephone number
-#  * ARPSIZE - Size (in kilobytes) of the application
-
-#=============================================================================
-# Copyright 2014 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(NOT CPACK_WIX_ROOT)
-  file(TO_CMAKE_PATH "$ENV{WIX}" CPACK_WIX_ROOT)
-endif()
-
-find_program(CPACK_WIX_CANDLE_EXECUTABLE candle
-  PATHS "${CPACK_WIX_ROOT}/bin")
-
-if(NOT CPACK_WIX_CANDLE_EXECUTABLE)
-  message(FATAL_ERROR "Could not find the WiX candle executable.")
-endif()
-
-find_program(CPACK_WIX_LIGHT_EXECUTABLE light
-  PATHS "${CPACK_WIX_ROOT}/bin")
-
-if(NOT CPACK_WIX_LIGHT_EXECUTABLE)
-  message(FATAL_ERROR "Could not find the WiX light executable.")
-endif()
diff --git a/share/cmake-3.2/Modules/CTest.cmake b/share/cmake-3.2/Modules/CTest.cmake
deleted file mode 100644
index 7759ead..0000000
--- a/share/cmake-3.2/Modules/CTest.cmake
+++ /dev/null
@@ -1,300 +0,0 @@
-#.rst:
-# CTest
-# -----
-#
-# Configure a project for testing with CTest/CDash
-#
-# Include this module in the top CMakeLists.txt file of a project to
-# enable testing with CTest and dashboard submissions to CDash:
-#
-# ::
-#
-#    project(MyProject)
-#    ...
-#    include(CTest)
-#
-# The module automatically creates a BUILD_TESTING option that selects
-# whether to enable testing support (ON by default).  After including
-# the module, use code like
-#
-# ::
-#
-#    if(BUILD_TESTING)
-#      # ... CMake code to create tests ...
-#    endif()
-#
-# to creating tests when testing is enabled.
-#
-# To enable submissions to a CDash server, create a CTestConfig.cmake
-# file at the top of the project with content such as
-#
-# ::
-#
-#    set(CTEST_PROJECT_NAME "MyProject")
-#    set(CTEST_NIGHTLY_START_TIME "01:00:00 UTC")
-#    set(CTEST_DROP_METHOD "http")
-#    set(CTEST_DROP_SITE "my.cdash.org")
-#    set(CTEST_DROP_LOCATION "/submit.php?project=MyProject")
-#    set(CTEST_DROP_SITE_CDASH TRUE)
-#
-# (the CDash server can provide the file to a project administrator who
-# configures 'MyProject').  Settings in the config file are shared by
-# both this CTest module and the CTest command-line tool's dashboard
-# script mode (ctest -S).
-#
-# While building a project for submission to CDash, CTest scans the
-# build output for errors and warnings and reports them with surrounding
-# context from the build log.  This generic approach works for all build
-# tools, but does not give details about the command invocation that
-# produced a given problem.  One may get more detailed reports by adding
-#
-# ::
-#
-#    set(CTEST_USE_LAUNCHERS 1)
-#
-# to the CTestConfig.cmake file.  When this option is enabled, the CTest
-# module tells CMake's Makefile generators to invoke every command in
-# the generated build system through a CTest launcher program.
-# (Currently the CTEST_USE_LAUNCHERS option is ignored on non-Makefile
-# generators.) During a manual build each launcher transparently runs
-# the command it wraps.  During a CTest-driven build for submission to
-# CDash each launcher reports detailed information when its command
-# fails or warns.  (Setting CTEST_USE_LAUNCHERS in CTestConfig.cmake is
-# convenient, but also adds the launcher overhead even for manual
-# builds.  One may instead set it in a CTest dashboard script and add it
-# to the CMake cache for the build tree.)
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-option(BUILD_TESTING "Build the testing tree." ON)
-
-# function to turn generator name into a version string
-# like vs7 vs71 vs8 vs9
-function(GET_VS_VERSION_STRING generator var)
-  string(REGEX REPLACE "Visual Studio ([0-9][0-9]?)($|.*)" "\\1"
-    NUMBER "${generator}")
-  if("${generator}" MATCHES "Visual Studio 7 .NET 2003")
-    set(ver_string "vs71")
-  else()
-    set(ver_string "vs${NUMBER}")
-  endif()
-  set(${var} ${ver_string} PARENT_SCOPE)
-endfunction()
-
-include(CTestUseLaunchers)
-
-if(BUILD_TESTING)
-  # Setup some auxilary macros
-  macro(SET_IF_NOT_SET var val)
-    if(NOT DEFINED "${var}")
-      set("${var}" "${val}")
-    endif()
-  endmacro()
-
-  macro(SET_IF_SET var val)
-    if(NOT "${val}" STREQUAL "")
-      set("${var}" "${val}")
-    endif()
-  endmacro()
-
-  macro(SET_IF_SET_AND_NOT_SET var val)
-    if(NOT "${val}" STREQUAL "")
-      SET_IF_NOT_SET("${var}" "${val}")
-    endif()
-  endmacro()
-
-  # Make sure testing is enabled
-  enable_testing()
-
-  if(EXISTS "${PROJECT_SOURCE_DIR}/CTestConfig.cmake")
-    include("${PROJECT_SOURCE_DIR}/CTestConfig.cmake")
-    SET_IF_SET_AND_NOT_SET(NIGHTLY_START_TIME "${CTEST_NIGHTLY_START_TIME}")
-    SET_IF_SET_AND_NOT_SET(DROP_METHOD "${CTEST_DROP_METHOD}")
-    SET_IF_SET_AND_NOT_SET(DROP_SITE "${CTEST_DROP_SITE}")
-    SET_IF_SET_AND_NOT_SET(DROP_SITE_USER "${CTEST_DROP_SITE_USER}")
-    SET_IF_SET_AND_NOT_SET(DROP_SITE_PASSWORD "${CTEST_DROP_SITE_PASWORD}")
-    SET_IF_SET_AND_NOT_SET(DROP_SITE_MODE "${CTEST_DROP_SITE_MODE}")
-    SET_IF_SET_AND_NOT_SET(DROP_LOCATION "${CTEST_DROP_LOCATION}")
-    SET_IF_SET_AND_NOT_SET(TRIGGER_SITE "${CTEST_TRIGGER_SITE}")
-    SET_IF_SET_AND_NOT_SET(UPDATE_TYPE "${CTEST_UPDATE_TYPE}")
-  endif()
-
-  # the project can have a DartConfig.cmake file
-  if(EXISTS "${PROJECT_SOURCE_DIR}/DartConfig.cmake")
-    include("${PROJECT_SOURCE_DIR}/DartConfig.cmake")
-  else()
-    # Dashboard is opened for submissions for a 24 hour period starting at
-    # the specified NIGHTLY_START_TIME. Time is specified in 24 hour format.
-    SET_IF_NOT_SET (NIGHTLY_START_TIME "00:00:00 EDT")
-    SET_IF_NOT_SET(DROP_METHOD "http")
-    SET_IF_NOT_SET (COMPRESS_SUBMISSION ON)
-  endif()
-  SET_IF_NOT_SET (NIGHTLY_START_TIME "00:00:00 EDT")
-
-  find_program(CVSCOMMAND cvs )
-  set(CVS_UPDATE_OPTIONS "-d -A -P" CACHE STRING
-    "Options passed to the cvs update command.")
-  find_program(SVNCOMMAND svn)
-  find_program(BZRCOMMAND bzr)
-  find_program(HGCOMMAND hg)
-  find_program(GITCOMMAND git)
-  find_program(P4COMMAND p4)
-
-  if(NOT UPDATE_TYPE)
-    if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/CVS")
-      set(UPDATE_TYPE cvs)
-    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.svn")
-      set(UPDATE_TYPE svn)
-    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.bzr")
-      set(UPDATE_TYPE bzr)
-    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.hg")
-      set(UPDATE_TYPE hg)
-    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.git")
-      set(UPDATE_TYPE git)
-    endif()
-  endif()
-
-  string(TOLOWER "${UPDATE_TYPE}" _update_type)
-  if("${_update_type}" STREQUAL "cvs")
-    set(UPDATE_COMMAND "${CVSCOMMAND}")
-    set(UPDATE_OPTIONS "${CVS_UPDATE_OPTIONS}")
-  elseif("${_update_type}" STREQUAL "svn")
-    set(UPDATE_COMMAND "${SVNCOMMAND}")
-    set(UPDATE_OPTIONS "${SVN_UPDATE_OPTIONS}")
-  elseif("${_update_type}" STREQUAL "bzr")
-    set(UPDATE_COMMAND "${BZRCOMMAND}")
-    set(UPDATE_OPTIONS "${BZR_UPDATE_OPTIONS}")
-  elseif("${_update_type}" STREQUAL "hg")
-    set(UPDATE_COMMAND "${HGCOMMAND}")
-    set(UPDATE_OPTIONS "${HG_UPDATE_OPTIONS}")
-  elseif("${_update_type}" STREQUAL "git")
-    set(UPDATE_COMMAND "${GITCOMMAND}")
-    set(UPDATE_OPTIONS "${GIT_UPDATE_OPTIONS}")
-  elseif("${_update_type}" STREQUAL "p4")
-    set(UPDATE_COMMAND "${P4COMMAND}")
-    set(UPDATE_OPTIONS "${P4_UPDATE_OPTIONS}")
-  endif()
-
-  set(DART_TESTING_TIMEOUT 1500 CACHE STRING
-    "Maximum time allowed before CTest will kill the test.")
-
-  set(CTEST_SUBMIT_RETRY_DELAY 5 CACHE STRING
-    "How long to wait between timed-out CTest submissions.")
-  set(CTEST_SUBMIT_RETRY_COUNT 3 CACHE STRING
-    "How many times to retry timed-out CTest submissions.")
-
-  find_program(MEMORYCHECK_COMMAND
-    NAMES purify valgrind boundscheck
-    PATHS
-    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Rational Software\\Purify\\Setup;InstallFolder]"
-    DOC "Path to the memory checking command, used for memory error detection."
-    )
-  find_program(SLURM_SBATCH_COMMAND sbatch DOC
-    "Path to the SLURM sbatch executable"
-    )
-  find_program(SLURM_SRUN_COMMAND srun DOC
-    "Path to the SLURM srun executable"
-    )
-  set(MEMORYCHECK_SUPPRESSIONS_FILE "" CACHE FILEPATH
-    "File that contains suppressions for the memory checker")
-  find_program(SCPCOMMAND scp DOC
-    "Path to scp command, used by CTest for submitting results to a Dart server"
-    )
-  find_program(COVERAGE_COMMAND gcov DOC
-    "Path to the coverage program that CTest uses for performing coverage inspection"
-    )
-  set(COVERAGE_EXTRA_FLAGS "-l" CACHE STRING
-    "Extra command line flags to pass to the coverage tool")
-
-  # set the site name
-  site_name(SITE)
-  # set the build name
-  if(NOT BUILDNAME)
-    set(DART_COMPILER "${CMAKE_CXX_COMPILER}")
-    if(NOT DART_COMPILER)
-      set(DART_COMPILER "${CMAKE_C_COMPILER}")
-    endif()
-    if(NOT DART_COMPILER)
-      set(DART_COMPILER "unknown")
-    endif()
-    if(WIN32)
-      set(DART_NAME_COMPONENT "NAME_WE")
-    else()
-      set(DART_NAME_COMPONENT "NAME")
-    endif()
-    if(NOT BUILD_NAME_SYSTEM_NAME)
-      set(BUILD_NAME_SYSTEM_NAME "${CMAKE_SYSTEM_NAME}")
-    endif()
-    if(WIN32)
-      set(BUILD_NAME_SYSTEM_NAME "Win32")
-    endif()
-    if(UNIX OR BORLAND)
-      get_filename_component(DART_CXX_NAME
-        "${CMAKE_CXX_COMPILER}" ${DART_NAME_COMPONENT})
-    else()
-      get_filename_component(DART_CXX_NAME
-        "${CMAKE_MAKE_PROGRAM}" ${DART_NAME_COMPONENT})
-    endif()
-    if(DART_CXX_NAME MATCHES "msdev")
-      set(DART_CXX_NAME "vs60")
-    endif()
-    if(DART_CXX_NAME MATCHES "devenv")
-      GET_VS_VERSION_STRING("${CMAKE_GENERATOR}" DART_CXX_NAME)
-    endif()
-    set(BUILDNAME "${BUILD_NAME_SYSTEM_NAME}-${DART_CXX_NAME}")
-  endif()
-
-  # the build command
-  build_command(MAKECOMMAND_DEFAULT_VALUE
-    CONFIGURATION "\${CTEST_CONFIGURATION_TYPE}")
-  set(MAKECOMMAND ${MAKECOMMAND_DEFAULT_VALUE}
-    CACHE STRING "Command to build the project")
-
-  # the default build configuration the ctest build handler will use
-  # if there is no -C arg given to ctest:
-  set(DEFAULT_CTEST_CONFIGURATION_TYPE "$ENV{CMAKE_CONFIG_TYPE}")
-  if(DEFAULT_CTEST_CONFIGURATION_TYPE STREQUAL "")
-    set(DEFAULT_CTEST_CONFIGURATION_TYPE "Release")
-  endif()
-
-  mark_as_advanced(
-    BZRCOMMAND
-    BZR_UPDATE_OPTIONS
-    COVERAGE_COMMAND
-    COVERAGE_EXTRA_FLAGS
-    CTEST_SUBMIT_RETRY_DELAY
-    CTEST_SUBMIT_RETRY_COUNT
-    CVSCOMMAND
-    CVS_UPDATE_OPTIONS
-    DART_TESTING_TIMEOUT
-    GITCOMMAND
-    P4COMMAND
-    HGCOMMAND
-    MAKECOMMAND
-    MEMORYCHECK_COMMAND
-    MEMORYCHECK_SUPPRESSIONS_FILE
-    PURIFYCOMMAND
-    SCPCOMMAND
-    SLURM_SBATCH_COMMAND
-    SLURM_SRUN_COMMAND
-    SITE
-    SVNCOMMAND
-    SVN_UPDATE_OPTIONS
-    )
-  if(NOT RUN_FROM_DART)
-    set(RUN_FROM_CTEST_OR_DART 1)
-    include(CTestTargets)
-    set(RUN_FROM_CTEST_OR_DART)
-  endif()
-endif()
diff --git a/share/cmake-3.2/Modules/CTestCoverageCollectGCOV.cmake b/share/cmake-3.2/Modules/CTestCoverageCollectGCOV.cmake
deleted file mode 100644
index a607c52..0000000
--- a/share/cmake-3.2/Modules/CTestCoverageCollectGCOV.cmake
+++ /dev/null
@@ -1,159 +0,0 @@
-#.rst:
-# CTestCoverageCollectGCOV
-# ------------------------
-#
-# This module provides the function ``ctest_coverage_collect_gcov``.
-# The function will run gcov on the .gcda files in a binary tree and then
-# package all of the .gcov files into a tar file with a data.json that
-# contains the source and build directories for CDash to use in parsing
-# the coverage data. In addtion the Labels.json files for targets that
-# have coverage information are also put in the tar file for CDash to
-# asign the correct labels. This file can be sent to a CDash server for
-# display with the
-# :command:`ctest_submit(CDASH_UPLOAD)` command.
-#
-# .. command:: cdash_coverage_collect_gcov
-#
-#   ::
-#
-#     ctest_coverage_collect_gcov(TARBALL <tarfile>
-#       [SOURCE <source_dir>][BUILD <build_dir>]
-#       [GCOV_COMMAND <gcov_command>]
-#       [GCOV_OPTIONS <options>...]
-#       )
-#
-#   Run gcov and package a tar file for CDash.  The options are:
-#
-#   ``TARBALL <tarfile>``
-#     Specify the location of the ``.tar`` file to be created for later
-#     upload to CDash.  Relative paths will be interpreted with respect
-#     to the top-level build directory.
-#
-#   ``SOURCE <source_dir>``
-#     Specify the top-level source directory for the build.
-#     Default is the value of :variable:`CTEST_SOURCE_DIRECTORY`.
-#
-#   ``BUILD <build_dir>``
-#     Specify the top-level build directory for the build.
-#     Default is the value of :variable:`CTEST_BINARY_DIRECTORY`.
-#
-#   ``GCOV_COMMAND <gcov_command>``
-#     Specify the full path to the ``gcov`` command on the machine.
-#     Default is the value of :variable:`CTEST_COVERAGE_COMMAND`.
-#
-#   ``GCOV_OPTIONS <options>...``
-#     Specify options to be passed to gcov.  The ``gcov`` command
-#     is run as ``gcov <options>... -o <gcov-dir> <file>.gcda``.
-#     If not specified, the default option is just ``-b``.
-
-#=============================================================================
-# Copyright 2014-2015 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-include(CMakeParseArguments)
-function(ctest_coverage_collect_gcov)
-  set(options "")
-  set(oneValueArgs TARBALL SOURCE BUILD GCOV_COMMAND)
-  set(multiValueArgs GCOV_OPTIONS)
-  cmake_parse_arguments(GCOV  "${options}" "${oneValueArgs}"
-    "${multiValueArgs}" "" ${ARGN} )
-  if(NOT DEFINED GCOV_TARBALL)
-    message(FATAL_ERROR
-      "TARBALL must be specified. for ctest_coverage_collect_gcov")
-  endif()
-  if(NOT DEFINED GCOV_SOURCE)
-    set(source_dir "${CTEST_SOURCE_DIRECTORY}")
-  else()
-    set(source_dir "${GCOV_SOURCE}")
-  endif()
-  if(NOT DEFINED GCOV_BUILD)
-    set(binary_dir "${CTEST_BINARY_DIRECTORY}")
-  else()
-    set(binary_dir "${GCOV_BUILD}")
-  endif()
-  if(NOT DEFINED GCOV_GCOV_COMMAND)
-    set(gcov_command "${CTEST_COVERAGE_COMMAND}")
-  else()
-    set(gcov_command "${GCOV_GCOV_COMMAND}")
-  endif()
-  # run gcov on each gcda file in the binary tree
-  set(gcda_files)
-  set(label_files)
-  # look for gcda files in the target directories
-  # could do a glob from the top of the binary tree but
-  # this will be faster and only look where the files will be
-  file(STRINGS "${binary_dir}/CMakeFiles/TargetDirectories.txt" target_dirs
-       ENCODING UTF-8)
-  foreach(target_dir ${target_dirs})
-    file(GLOB_RECURSE gfiles RELATIVE ${binary_dir} "${target_dir}/*.gcda")
-    list(LENGTH gfiles len)
-    # if we have gcda files then also grab the labels file for that target
-    if(${len} GREATER 0)
-      file(GLOB_RECURSE lfiles RELATIVE ${binary_dir}
-        "${target_dir}/Labels.json")
-      list(APPEND gcda_files ${gfiles})
-      list(APPEND label_files ${lfiles})
-    endif()
-  endforeach()
-  # return early if no coverage files were found
-  list(LENGTH gcda_files len)
-  if(len EQUAL 0)
-    message("ctest_coverage_collect_gcov: No .gcda files found, "
-      "ignoring coverage request.")
-    return()
-  endif()
-  # setup the dir for the coverage files
-  set(coverage_dir "${binary_dir}/Testing/CoverageInfo")
-  file(MAKE_DIRECTORY  "${coverage_dir}")
-  # call gcov on each .gcda file
-  foreach (gcda_file ${gcda_files})
-    # get the directory of the gcda file
-    get_filename_component(gcda_file ${binary_dir}/${gcda_file} ABSOLUTE)
-    get_filename_component(gcov_dir ${gcda_file} DIRECTORY)
-    # run gcov, this will produce the .gcov file in the current
-    # working directory
-    if(NOT DEFINED GCOV_GCOV_OPTIONS)
-      set(GCOV_GCOV_OPTIONS -b)
-    endif()
-    execute_process(COMMAND
-      ${gcov_command} ${GCOV_GCOV_OPTIONS} -o ${gcov_dir} ${gcda_file}
-      OUTPUT_VARIABLE out
-      RESULT_VARIABLE res
-      WORKING_DIRECTORY ${coverage_dir})
-  endforeach()
-  if(NOT "${res}" EQUAL 0)
-    message(STATUS "Error running gcov: ${res} ${out}")
-  endif()
-  # create json file with project information
-  file(WRITE ${coverage_dir}/data.json
-    "{
-    \"Source\": \"${source_dir}\",
-    \"Binary\": \"${binary_dir}\"
-}")
-  # collect the gcov files
-  set(gcov_files)
-  file(GLOB_RECURSE gcov_files RELATIVE ${binary_dir} "${coverage_dir}/*.gcov")
-  # tar up the coverage info with the same date so that the md5
-  # sum will be the same for the tar file independent of file time
-  # stamps
-  string(REPLACE ";" "\n" gcov_files "${gcov_files}")
-  string(REPLACE ";" "\n" label_files "${label_files}")
-  file(WRITE "${coverage_dir}/coverage_file_list.txt"
-    "${gcov_files}
-${coverage_dir}/data.json
-${label_files}
-")
-  execute_process(COMMAND
-    ${CMAKE_COMMAND} -E tar cvfj ${GCOV_TARBALL}
-    "--mtime=1970-01-01 0:0:0 UTC"
-    --files-from=${coverage_dir}/coverage_file_list.txt
-    WORKING_DIRECTORY ${binary_dir})
-endfunction()
diff --git a/share/cmake-3.2/Modules/CheckCSourceCompiles.cmake b/share/cmake-3.2/Modules/CheckCSourceCompiles.cmake
deleted file mode 100644
index 6e80fb5..0000000
--- a/share/cmake-3.2/Modules/CheckCSourceCompiles.cmake
+++ /dev/null
@@ -1,111 +0,0 @@
-#.rst:
-# CheckCSourceCompiles
-# --------------------
-#
-# Check if given C source compiles and links into an executable
-#
-# CHECK_C_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
-#
-# ::
-#
-#   <code>       - source code to try to compile, must define 'main'
-#   <var>        - variable to store whether the source code compiled
-#                  Will be created as an internal cache variable.
-#   <fail-regex> - fail if test output matches this regex
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_C_SOURCE_COMPILES SOURCE VAR)
-  if(NOT DEFINED "${VAR}")
-    set(_FAIL_REGEX)
-    set(_key)
-    foreach(arg ${ARGN})
-      if("${arg}" MATCHES "^(FAIL_REGEX)$")
-        set(_key "${arg}")
-      elseif(_key)
-        list(APPEND _${_key} "${arg}")
-      else()
-        message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
-      endif()
-    endforeach()
-    set(MACRO_CHECK_FUNCTION_DEFINITIONS
-      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES
-        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
-    else()
-      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES)
-    endif()
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES
-        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES)
-    endif()
-    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c"
-      "${SOURCE}\n")
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Performing Test ${VAR}")
-    endif()
-    try_compile(${VAR}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      ${CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES}
-      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
-      "${CHECK_C_SOURCE_COMPILES_ADD_INCLUDES}"
-      OUTPUT_VARIABLE OUTPUT)
-
-    foreach(_regex ${_FAIL_REGEX})
-      if("${OUTPUT}" MATCHES "${_regex}")
-        set(${VAR} 0)
-      endif()
-    endforeach()
-
-    if(${VAR})
-      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Success")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Performing C SOURCE FILE Test ${VAR} succeded with the following output:\n"
-        "${OUTPUT}\n"
-        "Source file was:\n${SOURCE}\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Failed")
-      endif()
-      set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Performing C SOURCE FILE Test ${VAR} failed with the following output:\n"
-        "${OUTPUT}\n"
-        "Source file was:\n${SOURCE}\n")
-    endif()
-  endif()
-endmacro()
-
diff --git a/share/cmake-3.2/Modules/CheckCSourceRuns.cmake b/share/cmake-3.2/Modules/CheckCSourceRuns.cmake
deleted file mode 100644
index 0ce423c..0000000
--- a/share/cmake-3.2/Modules/CheckCSourceRuns.cmake
+++ /dev/null
@@ -1,107 +0,0 @@
-#.rst:
-# CheckCSourceRuns
-# ----------------
-#
-# Check if the given C source code compiles and runs.
-#
-# CHECK_C_SOURCE_RUNS(<code> <var>)
-#
-# ::
-#
-#   <code>   - source code to try to compile
-#   <var>    - variable to store the result
-#              (1 for success, empty for failure)
-#              Will be created as an internal cache variable.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_C_SOURCE_RUNS SOURCE VAR)
-  if(NOT DEFINED "${VAR}")
-    set(MACRO_CHECK_FUNCTION_DEFINITIONS
-      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES
-        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
-    else()
-      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES)
-    endif()
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES
-        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES)
-    endif()
-    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c"
-      "${SOURCE}\n")
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Performing Test ${VAR}")
-    endif()
-    try_run(${VAR}_EXITCODE ${VAR}_COMPILED
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      ${CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES}
-      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
-      -DCMAKE_SKIP_RPATH:BOOL=${CMAKE_SKIP_RPATH}
-      "${CHECK_C_SOURCE_COMPILES_ADD_INCLUDES}"
-      COMPILE_OUTPUT_VARIABLE OUTPUT)
-    # if it did not compile make the return value fail code of 1
-    if(NOT ${VAR}_COMPILED)
-      set(${VAR}_EXITCODE 1)
-    endif()
-    # if the return value was 0 then it worked
-    if("${${VAR}_EXITCODE}" EQUAL 0)
-      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Success")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Performing C SOURCE FILE Test ${VAR} succeded with the following output:\n"
-        "${OUTPUT}\n"
-        "Return value: ${${VAR}}\n"
-        "Source file was:\n${SOURCE}\n")
-    else()
-      if(CMAKE_CROSSCOMPILING AND "${${VAR}_EXITCODE}" MATCHES  "FAILED_TO_RUN")
-        set(${VAR} "${${VAR}_EXITCODE}")
-      else()
-        set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
-      endif()
-
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Failed")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Performing C SOURCE FILE Test ${VAR} failed with the following output:\n"
-        "${OUTPUT}\n"
-        "Return value: ${${VAR}_EXITCODE}\n"
-        "Source file was:\n${SOURCE}\n")
-
-    endif()
-  endif()
-endmacro()
-
diff --git a/share/cmake-3.2/Modules/CheckCXXSourceCompiles.cmake b/share/cmake-3.2/Modules/CheckCXXSourceCompiles.cmake
deleted file mode 100644
index 6d52ec6..0000000
--- a/share/cmake-3.2/Modules/CheckCXXSourceCompiles.cmake
+++ /dev/null
@@ -1,112 +0,0 @@
-#.rst:
-# CheckCXXSourceCompiles
-# ----------------------
-#
-# Check if given C++ source compiles and links into an executable
-#
-# CHECK_CXX_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
-#
-# ::
-#
-#   <code>       - source code to try to compile, must define 'main'
-#   <var>        - variable to store whether the source code compiled
-#                  Will be created as an internal cache variable.
-#   <fail-regex> - fail if test output matches this regex
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_CXX_SOURCE_COMPILES SOURCE VAR)
-  if(NOT DEFINED "${VAR}")
-    set(_FAIL_REGEX)
-    set(_key)
-    foreach(arg ${ARGN})
-      if("${arg}" MATCHES "^(FAIL_REGEX)$")
-        set(_key "${arg}")
-      elseif(_key)
-        list(APPEND _${_key} "${arg}")
-      else()
-        message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
-      endif()
-    endforeach()
-
-    set(MACRO_CHECK_FUNCTION_DEFINITIONS
-      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES
-        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
-    else()
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES)
-    endif()
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES
-        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES)
-    endif()
-    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx"
-      "${SOURCE}\n")
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Performing Test ${VAR}")
-    endif()
-    try_compile(${VAR}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      ${CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES}
-      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
-      "${CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES}"
-      OUTPUT_VARIABLE OUTPUT)
-
-    foreach(_regex ${_FAIL_REGEX})
-      if("${OUTPUT}" MATCHES "${_regex}")
-        set(${VAR} 0)
-      endif()
-    endforeach()
-
-    if(${VAR})
-      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Success")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Performing C++ SOURCE FILE Test ${VAR} succeded with the following output:\n"
-        "${OUTPUT}\n"
-        "Source file was:\n${SOURCE}\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Failed")
-      endif()
-      set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Performing C++ SOURCE FILE Test ${VAR} failed with the following output:\n"
-        "${OUTPUT}\n"
-        "Source file was:\n${SOURCE}\n")
-    endif()
-  endif()
-endmacro()
-
diff --git a/share/cmake-3.2/Modules/CheckCXXSourceRuns.cmake b/share/cmake-3.2/Modules/CheckCXXSourceRuns.cmake
deleted file mode 100644
index 3c06d75..0000000
--- a/share/cmake-3.2/Modules/CheckCXXSourceRuns.cmake
+++ /dev/null
@@ -1,107 +0,0 @@
-#.rst:
-# CheckCXXSourceRuns
-# ------------------
-#
-# Check if the given C++ source code compiles and runs.
-#
-# CHECK_CXX_SOURCE_RUNS(<code> <var>)
-#
-# ::
-#
-#   <code>   - source code to try to compile
-#   <var>    - variable to store the result
-#              (1 for success, empty for failure)
-#              Will be created as an internal cache variable.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_CXX_SOURCE_RUNS SOURCE VAR)
-  if(NOT DEFINED "${VAR}")
-    set(MACRO_CHECK_FUNCTION_DEFINITIONS
-      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES
-        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
-    else()
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES)
-    endif()
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES
-        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES)
-    endif()
-    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx"
-      "${SOURCE}\n")
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Performing Test ${VAR}")
-    endif()
-    try_run(${VAR}_EXITCODE ${VAR}_COMPILED
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      ${CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES}
-      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
-      -DCMAKE_SKIP_RPATH:BOOL=${CMAKE_SKIP_RPATH}
-      "${CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES}"
-      COMPILE_OUTPUT_VARIABLE OUTPUT)
-
-    # if it did not compile make the return value fail code of 1
-    if(NOT ${VAR}_COMPILED)
-      set(${VAR}_EXITCODE 1)
-    endif()
-    # if the return value was 0 then it worked
-    if("${${VAR}_EXITCODE}" EQUAL 0)
-      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Success")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Performing C++ SOURCE FILE Test ${VAR} succeded with the following output:\n"
-        "${OUTPUT}\n"
-        "Return value: ${${VAR}}\n"
-        "Source file was:\n${SOURCE}\n")
-    else()
-      if(CMAKE_CROSSCOMPILING AND "${${VAR}_EXITCODE}" MATCHES  "FAILED_TO_RUN")
-        set(${VAR} "${${VAR}_EXITCODE}")
-      else()
-        set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
-      endif()
-
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Failed")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Performing C++ SOURCE FILE Test ${VAR} failed with the following output:\n"
-        "${OUTPUT}\n"
-        "Return value: ${${VAR}_EXITCODE}\n"
-        "Source file was:\n${SOURCE}\n")
-    endif()
-  endif()
-endmacro()
-
diff --git a/share/cmake-3.2/Modules/CheckForPthreads.c b/share/cmake-3.2/Modules/CheckForPthreads.c
deleted file mode 100644
index 7250fbf..0000000
--- a/share/cmake-3.2/Modules/CheckForPthreads.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <stdio.h>
-#include <pthread.h>
-#include <unistd.h>
-
-void* runner(void*);
-
-int res = 0;
-#ifdef __CLASSIC_C__
-int main(){
-  int ac;
-  char*av[];
-#else
-int main(int ac, char*av[]){
-#endif
-  pthread_t tid[2];
-  pthread_create(&tid[0], 0, runner, (void*)1);
-  pthread_create(&tid[1], 0, runner, (void*)2);
-
-#if defined(__BEOS__) && !defined(__ZETA__) // (no usleep on BeOS 5.)
-  usleep(1); // for strange behavior on single-processor sun
-#endif
-
-  pthread_join(tid[0], 0);
-  pthread_join(tid[1], 0);
-  if(ac > 1000){return *av[0];}
-  return res;
-}
-
-void* runner(void* args)
-{
-  int cc;
-  for ( cc = 0; cc < 10; cc ++ )
-    {
-    printf("%d CC: %d\n", (int)args, cc);
-    }
-  res ++;
-  return 0;
-}
diff --git a/share/cmake-3.2/Modules/CheckFortranSourceCompiles.cmake b/share/cmake-3.2/Modules/CheckFortranSourceCompiles.cmake
deleted file mode 100644
index f90d05b..0000000
--- a/share/cmake-3.2/Modules/CheckFortranSourceCompiles.cmake
+++ /dev/null
@@ -1,111 +0,0 @@
-#.rst:
-# CheckFortranSourceCompiles
-# --------------------------
-#
-# Check if given Fortran source compiles and links into an executable::
-#
-#   CHECK_Fortran_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
-#
-# The arguments are:
-#
-# ``<code>``
-#   Source code to try to compile.  It must define a PROGRAM entry point.
-# ``<var>``
-#   Variable to store whether the source code compiled.
-#   Will be created as an internal cache variable.
-# ``<fail-regex>``
-#   Fail if test output matches this regex.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_Fortran_SOURCE_COMPILES SOURCE VAR)
-  if(NOT DEFINED "${VAR}")
-    set(_FAIL_REGEX)
-    set(_key)
-    foreach(arg ${ARGN})
-      if("${arg}" MATCHES "^(FAIL_REGEX)$")
-        set(_key "${arg}")
-      elseif(_key)
-        list(APPEND _${_key} "${arg}")
-      else()
-        message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
-      endif()
-    endforeach()
-    set(MACRO_CHECK_FUNCTION_DEFINITIONS
-      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_Fortran_SOURCE_COMPILES_ADD_LIBRARIES
-        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
-    else()
-      set(CHECK_Fortran_SOURCE_COMPILES_ADD_LIBRARIES)
-    endif()
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_Fortran_SOURCE_COMPILES_ADD_INCLUDES
-        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_Fortran_SOURCE_COMPILES_ADD_INCLUDES)
-    endif()
-    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.F"
-      "${SOURCE}\n")
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Performing Test ${VAR}")
-    endif()
-    try_compile(${VAR}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.F
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      ${CHECK_Fortran_SOURCE_COMPILES_ADD_LIBRARIES}
-      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
-      "${CHECK_Fortran_SOURCE_COMPILES_ADD_INCLUDES}"
-      OUTPUT_VARIABLE OUTPUT)
-
-    foreach(_regex ${_FAIL_REGEX})
-      if("${OUTPUT}" MATCHES "${_regex}")
-        set(${VAR} 0)
-      endif()
-    endforeach()
-
-    if(${VAR})
-      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Success")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Performing Fortran SOURCE FILE Test ${VAR} succeded with the following output:\n"
-        "${OUTPUT}\n"
-        "Source file was:\n${SOURCE}\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Performing Test ${VAR} - Failed")
-      endif()
-      set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Performing Fortran SOURCE FILE Test ${VAR} failed with the following output:\n"
-        "${OUTPUT}\n"
-        "Source file was:\n${SOURCE}\n")
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CheckFunctionExists.c b/share/cmake-3.2/Modules/CheckFunctionExists.c
deleted file mode 100644
index 607b3e8..0000000
--- a/share/cmake-3.2/Modules/CheckFunctionExists.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifdef CHECK_FUNCTION_EXISTS
-
-char CHECK_FUNCTION_EXISTS();
-#ifdef __CLASSIC_C__
-int main(){
-  int ac;
-  char*av[];
-#else
-int main(int ac, char*av[]){
-#endif
-  CHECK_FUNCTION_EXISTS();
-  if(ac > 1000)
-    {
-    return *av[0];
-    }
-  return 0;
-}
-
-#else  /* CHECK_FUNCTION_EXISTS */
-
-#  error "CHECK_FUNCTION_EXISTS has to specify the function"
-
-#endif /* CHECK_FUNCTION_EXISTS */
diff --git a/share/cmake-3.2/Modules/CheckFunctionExists.cmake b/share/cmake-3.2/Modules/CheckFunctionExists.cmake
deleted file mode 100644
index d277c32..0000000
--- a/share/cmake-3.2/Modules/CheckFunctionExists.cmake
+++ /dev/null
@@ -1,86 +0,0 @@
-#.rst:
-# CheckFunctionExists
-# -------------------
-#
-# Check if a C function can be linked
-#
-# CHECK_FUNCTION_EXISTS(<function> <variable>)
-#
-# Check that the <function> is provided by libraries on the system and
-# store the result in a <variable>.  This does not verify that any
-# system header file declares the function, only that it can be found at
-# link time (consider using CheckSymbolExists).
-# <variable> will be created as an internal cache variable.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2002-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_FUNCTION_EXISTS FUNCTION VARIABLE)
-  if(NOT DEFINED "${VARIABLE}" OR "x${${VARIABLE}}" STREQUAL "x${VARIABLE}")
-    set(MACRO_CHECK_FUNCTION_DEFINITIONS
-      "-DCHECK_FUNCTION_EXISTS=${FUNCTION} ${CMAKE_REQUIRED_FLAGS}")
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Looking for ${FUNCTION}")
-    endif()
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_FUNCTION_EXISTS_ADD_LIBRARIES
-        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
-    else()
-      set(CHECK_FUNCTION_EXISTS_ADD_LIBRARIES)
-    endif()
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_FUNCTION_EXISTS_ADD_INCLUDES
-        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_FUNCTION_EXISTS_ADD_INCLUDES)
-    endif()
-    try_compile(${VARIABLE}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_ROOT}/Modules/CheckFunctionExists.c
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      ${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}
-      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
-      "${CHECK_FUNCTION_EXISTS_ADD_INCLUDES}"
-      OUTPUT_VARIABLE OUTPUT)
-    if(${VARIABLE})
-      set(${VARIABLE} 1 CACHE INTERNAL "Have function ${FUNCTION}")
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${FUNCTION} - found")
-      endif()
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Determining if the function ${FUNCTION} exists passed with the following output:\n"
-        "${OUTPUT}\n\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${FUNCTION} - not found")
-      endif()
-      set(${VARIABLE} "" CACHE INTERNAL "Have function ${FUNCTION}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the function ${FUNCTION} exists failed with the following output:\n"
-        "${OUTPUT}\n\n")
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CheckIncludeFile.cmake b/share/cmake-3.2/Modules/CheckIncludeFile.cmake
deleted file mode 100644
index 402b37c..0000000
--- a/share/cmake-3.2/Modules/CheckIncludeFile.cmake
+++ /dev/null
@@ -1,95 +0,0 @@
-#.rst:
-# CheckIncludeFile
-# ----------------
-#
-# macro which checks the include file exists.
-#
-# CHECK_INCLUDE_FILE(INCLUDE VARIABLE)
-#
-# ::
-#
-#   INCLUDE  - name of include file
-#   VARIABLE - variable to return result
-#              Will be created as an internal cache variable.
-#
-#
-#
-# an optional third argument is the CFlags to add to the compile line or
-# you can use CMAKE_REQUIRED_FLAGS
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-macro(CHECK_INCLUDE_FILE INCLUDE VARIABLE)
-  if(NOT DEFINED "${VARIABLE}")
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_INCLUDE_FILE_C_INCLUDE_DIRS "-DINCLUDE_DIRECTORIES=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_INCLUDE_FILE_C_INCLUDE_DIRS)
-    endif()
-    set(MACRO_CHECK_INCLUDE_FILE_FLAGS ${CMAKE_REQUIRED_FLAGS})
-    set(CHECK_INCLUDE_FILE_VAR ${INCLUDE})
-    configure_file(${CMAKE_ROOT}/Modules/CheckIncludeFile.c.in
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.c)
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Looking for ${INCLUDE}")
-    endif()
-    if(${ARGC} EQUAL 3)
-      set(CMAKE_C_FLAGS_SAVE ${CMAKE_C_FLAGS})
-      set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${ARGV2}")
-    endif()
-
-    try_compile(${VARIABLE}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.c
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      CMAKE_FLAGS
-      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILE_FLAGS}
-      "${CHECK_INCLUDE_FILE_C_INCLUDE_DIRS}"
-      OUTPUT_VARIABLE OUTPUT)
-
-    if(${ARGC} EQUAL 3)
-      set(CMAKE_C_FLAGS ${CMAKE_C_FLAGS_SAVE})
-    endif()
-
-    if(${VARIABLE})
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${INCLUDE} - found")
-      endif()
-      set(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Determining if the include file ${INCLUDE} "
-        "exists passed with the following output:\n"
-        "${OUTPUT}\n\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${INCLUDE} - not found")
-      endif()
-      set(${VARIABLE} "" CACHE INTERNAL "Have include ${INCLUDE}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the include file ${INCLUDE} "
-        "exists failed with the following output:\n"
-        "${OUTPUT}\n\n")
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CheckIncludeFileCXX.cmake b/share/cmake-3.2/Modules/CheckIncludeFileCXX.cmake
deleted file mode 100644
index eae1730..0000000
--- a/share/cmake-3.2/Modules/CheckIncludeFileCXX.cmake
+++ /dev/null
@@ -1,99 +0,0 @@
-#.rst:
-# CheckIncludeFileCXX
-# -------------------
-#
-# Check if the include file exists.
-#
-# ::
-#
-#   CHECK_INCLUDE_FILE_CXX(INCLUDE VARIABLE)
-#
-#
-#
-# ::
-#
-#   INCLUDE  - name of include file
-#   VARIABLE - variable to return result
-#              Will be created as an internal cache variable.
-#
-#
-#
-# An optional third argument is the CFlags to add to the compile line or
-# you can use CMAKE_REQUIRED_FLAGS.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-macro(CHECK_INCLUDE_FILE_CXX INCLUDE VARIABLE)
-  if(NOT DEFINED "${VARIABLE}" OR "x${${VARIABLE}}" STREQUAL "x${VARIABLE}")
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_INCLUDE_FILE_CXX_INCLUDE_DIRS "-DINCLUDE_DIRECTORIES=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_INCLUDE_FILE_CXX_INCLUDE_DIRS)
-    endif()
-    set(MACRO_CHECK_INCLUDE_FILE_FLAGS ${CMAKE_REQUIRED_FLAGS})
-    set(CHECK_INCLUDE_FILE_VAR ${INCLUDE})
-    configure_file(${CMAKE_ROOT}/Modules/CheckIncludeFile.cxx.in
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.cxx)
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Looking for C++ include ${INCLUDE}")
-    endif()
-    if(${ARGC} EQUAL 3)
-      set(CMAKE_CXX_FLAGS_SAVE ${CMAKE_CXX_FLAGS})
-      set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${ARGV2}")
-    endif()
-
-    try_compile(${VARIABLE}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.cxx
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      CMAKE_FLAGS
-      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILE_FLAGS}
-      "${CHECK_INCLUDE_FILE_CXX_INCLUDE_DIRS}"
-      OUTPUT_VARIABLE OUTPUT)
-
-    if(${ARGC} EQUAL 3)
-      set(CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS_SAVE})
-    endif()
-
-    if(${VARIABLE})
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for C++ include ${INCLUDE} - found")
-      endif()
-      set(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Determining if the include file ${INCLUDE} "
-        "exists passed with the following output:\n"
-        "${OUTPUT}\n\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for C++ include ${INCLUDE} - not found")
-      endif()
-      set(${VARIABLE} "" CACHE INTERNAL "Have include ${INCLUDE}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the include file ${INCLUDE} "
-        "exists failed with the following output:\n"
-        "${OUTPUT}\n\n")
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CheckIncludeFiles.cmake b/share/cmake-3.2/Modules/CheckIncludeFiles.cmake
deleted file mode 100644
index 2494862..0000000
--- a/share/cmake-3.2/Modules/CheckIncludeFiles.cmake
+++ /dev/null
@@ -1,102 +0,0 @@
-#.rst:
-# CheckIncludeFiles
-# -----------------
-#
-# Check if the files can be included
-#
-#
-#
-# CHECK_INCLUDE_FILES(INCLUDE VARIABLE)
-#
-# ::
-#
-#   INCLUDE  - list of files to include
-#   VARIABLE - variable to return result
-#              Will be created as an internal cache variable.
-#
-#
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2003-2012 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-macro(CHECK_INCLUDE_FILES INCLUDE VARIABLE)
-  if(NOT DEFINED "${VARIABLE}")
-    set(CMAKE_CONFIGURABLE_FILE_CONTENT "/* */\n")
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CHECK_INCLUDE_FILES_INCLUDE_DIRS "-DINCLUDE_DIRECTORIES=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CHECK_INCLUDE_FILES_INCLUDE_DIRS)
-    endif()
-    set(CHECK_INCLUDE_FILES_CONTENT "/* */\n")
-    set(MACRO_CHECK_INCLUDE_FILES_FLAGS ${CMAKE_REQUIRED_FLAGS})
-    foreach(FILE ${INCLUDE})
-      set(CMAKE_CONFIGURABLE_FILE_CONTENT
-        "${CMAKE_CONFIGURABLE_FILE_CONTENT}#include <${FILE}>\n")
-    endforeach()
-    set(CMAKE_CONFIGURABLE_FILE_CONTENT
-      "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n\nint main(void){return 0;}\n")
-    configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
-      "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFiles.c" @ONLY)
-
-    set(_INCLUDE ${INCLUDE}) # remove empty elements
-    if("${_INCLUDE}" MATCHES "^([^;]+);.+;([^;]+)$")
-      list(LENGTH _INCLUDE _INCLUDE_LEN)
-      set(_description "${_INCLUDE_LEN} include files ${CMAKE_MATCH_1}, ..., ${CMAKE_MATCH_2}")
-    elseif("${_INCLUDE}" MATCHES "^([^;]+);([^;]+)$")
-      set(_description "include files ${CMAKE_MATCH_1}, ${CMAKE_MATCH_2}")
-    else()
-      set(_description "include file ${_INCLUDE}")
-    endif()
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Looking for ${_description}")
-    endif()
-    try_compile(${VARIABLE}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFiles.c
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      CMAKE_FLAGS
-      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILES_FLAGS}
-      "${CHECK_INCLUDE_FILES_INCLUDE_DIRS}"
-      OUTPUT_VARIABLE OUTPUT)
-    if(${VARIABLE})
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${_description} - found")
-      endif()
-      set(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Determining if files ${INCLUDE} "
-        "exist passed with the following output:\n"
-        "${OUTPUT}\n\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${_description} - not found")
-      endif()
-      set(${VARIABLE} "" CACHE INTERNAL "Have includes ${INCLUDE}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if files ${INCLUDE} "
-        "exist failed with the following output:\n"
-        "${OUTPUT}\nSource:\n${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CheckLibraryExists.cmake b/share/cmake-3.2/Modules/CheckLibraryExists.cmake
deleted file mode 100644
index 95c595a..0000000
--- a/share/cmake-3.2/Modules/CheckLibraryExists.cmake
+++ /dev/null
@@ -1,86 +0,0 @@
-#.rst:
-# CheckLibraryExists
-# ------------------
-#
-# Check if the function exists.
-#
-# CHECK_LIBRARY_EXISTS (LIBRARY FUNCTION LOCATION VARIABLE)
-#
-# ::
-#
-#   LIBRARY  - the name of the library you are looking for
-#   FUNCTION - the name of the function
-#   LOCATION - location where the library should be found
-#   VARIABLE - variable to store the result
-#              Will be created as an internal cache variable.
-#
-#
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_LIBRARY_EXISTS LIBRARY FUNCTION LOCATION VARIABLE)
-  if(NOT DEFINED "${VARIABLE}")
-    set(MACRO_CHECK_LIBRARY_EXISTS_DEFINITION
-      "-DCHECK_FUNCTION_EXISTS=${FUNCTION} ${CMAKE_REQUIRED_FLAGS}")
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Looking for ${FUNCTION} in ${LIBRARY}")
-    endif()
-    set(CHECK_LIBRARY_EXISTS_LIBRARIES ${LIBRARY})
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_LIBRARY_EXISTS_LIBRARIES
-        ${CHECK_LIBRARY_EXISTS_LIBRARIES} ${CMAKE_REQUIRED_LIBRARIES})
-    endif()
-    try_compile(${VARIABLE}
-      ${CMAKE_BINARY_DIR}
-      ${CMAKE_ROOT}/Modules/CheckFunctionExists.c
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      LINK_LIBRARIES ${CHECK_LIBRARY_EXISTS_LIBRARIES}
-      CMAKE_FLAGS
-      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_LIBRARY_EXISTS_DEFINITION}
-      -DLINK_DIRECTORIES:STRING=${LOCATION}
-      OUTPUT_VARIABLE OUTPUT)
-
-    if(${VARIABLE})
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${FUNCTION} in ${LIBRARY} - found")
-      endif()
-      set(${VARIABLE} 1 CACHE INTERNAL "Have library ${LIBRARY}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Determining if the function ${FUNCTION} exists in the ${LIBRARY} "
-        "passed with the following output:\n"
-        "${OUTPUT}\n\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${FUNCTION} in ${LIBRARY} - not found")
-      endif()
-      set(${VARIABLE} "" CACHE INTERNAL "Have library ${LIBRARY}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the function ${FUNCTION} exists in the ${LIBRARY} "
-        "failed with the following output:\n"
-        "${OUTPUT}\n\n")
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CheckStructHasMember.cmake b/share/cmake-3.2/Modules/CheckStructHasMember.cmake
deleted file mode 100644
index de31d2c..0000000
--- a/share/cmake-3.2/Modules/CheckStructHasMember.cmake
+++ /dev/null
@@ -1,84 +0,0 @@
-#.rst:
-# CheckStructHasMember
-# --------------------
-#
-# Check if the given struct or class has the specified member variable
-#
-# ::
-#
-#  CHECK_STRUCT_HAS_MEMBER(<struct> <member> <header> <variable>
-#                          [LANGUAGE <language>])
-#
-# ::
-#
-#   <struct> - the name of the struct or class you are interested in
-#   <member> - the member which existence you want to check
-#   <header> - the header(s) where the prototype should be declared
-#   <variable> - variable to store the result
-#   <language> - the compiler to use (C or CXX)
-#
-#
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-#
-#
-#
-# Example: CHECK_STRUCT_HAS_MEMBER("struct timeval" tv_sec sys/select.h
-# HAVE_TIMEVAL_TV_SEC LANGUAGE C)
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(CheckCSourceCompiles)
-include(CheckCXXSourceCompiles)
-
-macro (CHECK_STRUCT_HAS_MEMBER _STRUCT _MEMBER _HEADER _RESULT)
-   set(_INCLUDE_FILES)
-   foreach (it ${_HEADER})
-      set(_INCLUDE_FILES "${_INCLUDE_FILES}#include <${it}>\n")
-   endforeach ()
-
-   if("x${ARGN}" STREQUAL "x")
-      set(_lang C)
-   elseif("x${ARGN}" MATCHES "^xLANGUAGE;([a-zA-Z]+)$")
-      set(_lang "${CMAKE_MATCH_1}")
-   else()
-      message(FATAL_ERROR "Unknown arguments:\n  ${ARGN}\n")
-   endif()
-
-   set(_CHECK_STRUCT_MEMBER_SOURCE_CODE "
-${_INCLUDE_FILES}
-int main()
-{
-   (void)((${_STRUCT} *)0)->${_MEMBER};
-   return 0;
-}
-")
-
-   if("${_lang}" STREQUAL "C")
-      CHECK_C_SOURCE_COMPILES("${_CHECK_STRUCT_MEMBER_SOURCE_CODE}" ${_RESULT})
-   elseif("${_lang}" STREQUAL "CXX")
-      CHECK_CXX_SOURCE_COMPILES("${_CHECK_STRUCT_MEMBER_SOURCE_CODE}" ${_RESULT})
-   else()
-      message(FATAL_ERROR "Unknown language:\n  ${_lang}\nSupported languages: C, CXX.\n")
-   endif()
-endmacro ()
diff --git a/share/cmake-3.2/Modules/CheckSymbolExists.cmake b/share/cmake-3.2/Modules/CheckSymbolExists.cmake
deleted file mode 100644
index 79c5ba7..0000000
--- a/share/cmake-3.2/Modules/CheckSymbolExists.cmake
+++ /dev/null
@@ -1,113 +0,0 @@
-#.rst:
-# CheckSymbolExists
-# -----------------
-#
-# Check if a symbol exists as a function, variable, or macro
-#
-# CHECK_SYMBOL_EXISTS(<symbol> <files> <variable>)
-#
-# Check that the <symbol> is available after including given header
-# <files> and store the result in a <variable>.  Specify the list of
-# files in one argument as a semicolon-separated list.
-# <variable> will be created as an internal cache variable.
-#
-# If the header files define the symbol as a macro it is considered
-# available and assumed to work.  If the header files declare the symbol
-# as a function or variable then the symbol must also be available for
-# linking.  If the symbol is a type or enum value it will not be
-# recognized (consider using CheckTypeSize or CheckCSourceCompiles).  If
-# the check needs to be done in C++, consider using
-# CHECK_CXX_SYMBOL_EXISTS(), which does the same as
-# CHECK_SYMBOL_EXISTS(), but in C++.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-
-#=============================================================================
-# Copyright 2003-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-
-macro(CHECK_SYMBOL_EXISTS SYMBOL FILES VARIABLE)
-  _CHECK_SYMBOL_EXISTS("${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckSymbolExists.c" "${SYMBOL}" "${FILES}" "${VARIABLE}" )
-endmacro()
-
-macro(_CHECK_SYMBOL_EXISTS SOURCEFILE SYMBOL FILES VARIABLE)
-  if(NOT DEFINED "${VARIABLE}" OR "x${${VARIABLE}}" STREQUAL "x${VARIABLE}")
-    set(CMAKE_CONFIGURABLE_FILE_CONTENT "/* */\n")
-    set(MACRO_CHECK_SYMBOL_EXISTS_FLAGS ${CMAKE_REQUIRED_FLAGS})
-    if(CMAKE_REQUIRED_LIBRARIES)
-      set(CHECK_SYMBOL_EXISTS_LIBS
-        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
-    else()
-      set(CHECK_SYMBOL_EXISTS_LIBS)
-    endif()
-    if(CMAKE_REQUIRED_INCLUDES)
-      set(CMAKE_SYMBOL_EXISTS_INCLUDES
-        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
-    else()
-      set(CMAKE_SYMBOL_EXISTS_INCLUDES)
-    endif()
-    foreach(FILE ${FILES})
-      set(CMAKE_CONFIGURABLE_FILE_CONTENT
-        "${CMAKE_CONFIGURABLE_FILE_CONTENT}#include <${FILE}>\n")
-    endforeach()
-    set(CMAKE_CONFIGURABLE_FILE_CONTENT
-      "${CMAKE_CONFIGURABLE_FILE_CONTENT}\nint main(int argc, char** argv)\n{\n  (void)argv;\n#ifndef ${SYMBOL}\n  return ((int*)(&${SYMBOL}))[argc];\n#else\n  (void)argc;\n  return 0;\n#endif\n}\n")
-
-    configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
-      "${SOURCEFILE}" @ONLY)
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Looking for ${SYMBOL}")
-    endif()
-    try_compile(${VARIABLE}
-      ${CMAKE_BINARY_DIR}
-      "${SOURCEFILE}"
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-      ${CHECK_SYMBOL_EXISTS_LIBS}
-      CMAKE_FLAGS
-      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_SYMBOL_EXISTS_FLAGS}
-      "${CMAKE_SYMBOL_EXISTS_INCLUDES}"
-      OUTPUT_VARIABLE OUTPUT)
-    if(${VARIABLE})
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${SYMBOL} - found")
-      endif()
-      set(${VARIABLE} 1 CACHE INTERNAL "Have symbol ${SYMBOL}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Determining if the ${SYMBOL} "
-        "exist passed with the following output:\n"
-        "${OUTPUT}\nFile ${SOURCEFILE}:\n"
-        "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${SYMBOL} - not found")
-      endif()
-      set(${VARIABLE} "" CACHE INTERNAL "Have symbol ${SYMBOL}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the ${SYMBOL} "
-        "exist failed with the following output:\n"
-        "${OUTPUT}\nFile ${SOURCEFILE}:\n"
-        "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CheckTypeSize.cmake b/share/cmake-3.2/Modules/CheckTypeSize.cmake
deleted file mode 100644
index 73ad86e..0000000
--- a/share/cmake-3.2/Modules/CheckTypeSize.cmake
+++ /dev/null
@@ -1,273 +0,0 @@
-#.rst:
-# CheckTypeSize
-# -------------
-#
-# Check sizeof a type
-#
-# ::
-#
-#   CHECK_TYPE_SIZE(TYPE VARIABLE [BUILTIN_TYPES_ONLY]
-#                                 [LANGUAGE <language>])
-#
-# Check if the type exists and determine its size.  On return,
-# "HAVE_${VARIABLE}" holds the existence of the type, and "${VARIABLE}"
-# holds one of the following:
-#
-# ::
-#
-#    <size> = type has non-zero size <size>
-#    "0"    = type has arch-dependent size (see below)
-#    ""     = type does not exist
-#
-# Both ``HAVE_${VARIABLE}`` and ``${VARIABLE}`` will be created as internal
-# cache variables.
-#
-# Furthermore, the variable "${VARIABLE}_CODE" holds C preprocessor code
-# to define the macro "${VARIABLE}" to the size of the type, or leave
-# the macro undefined if the type does not exist.
-#
-# The variable "${VARIABLE}" may be "0" when CMAKE_OSX_ARCHITECTURES has
-# multiple architectures for building OS X universal binaries.  This
-# indicates that the type size varies across architectures.  In this
-# case "${VARIABLE}_CODE" contains C preprocessor tests mapping from
-# each architecture macro to the corresponding type size.  The list of
-# architecture macros is stored in "${VARIABLE}_KEYS", and the value for
-# each key is stored in "${VARIABLE}-${KEY}".
-#
-# If the BUILTIN_TYPES_ONLY option is not given, the macro checks for
-# headers <sys/types.h>, <stdint.h>, and <stddef.h>, and saves results
-# in HAVE_SYS_TYPES_H, HAVE_STDINT_H, and HAVE_STDDEF_H.  The type size
-# check automatically includes the available headers, thus supporting
-# checks of types defined in the headers.
-#
-# If LANGUAGE is set, the specified compiler will be used to perform the
-# check. Acceptable values are C and CXX
-#
-# Despite the name of the macro you may use it to check the size of more
-# complex expressions, too.  To check e.g.  for the size of a struct
-# member you can do something like this:
-#
-# ::
-#
-#   check_type_size("((struct something*)0)->member" SIZEOF_MEMBER)
-#
-#
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-#   CMAKE_EXTRA_INCLUDE_FILES = list of extra headers to include
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(CheckIncludeFile)
-include(CheckIncludeFileCXX)
-
-cmake_policy(PUSH)
-cmake_policy(VERSION 3.0)
-
-get_filename_component(__check_type_size_dir "${CMAKE_CURRENT_LIST_FILE}" PATH)
-
-#-----------------------------------------------------------------------------
-# Helper function.  DO NOT CALL DIRECTLY.
-function(__check_type_size_impl type var map builtin language)
-  if(NOT CMAKE_REQUIRED_QUIET)
-    message(STATUS "Check size of ${type}")
-  endif()
-
-  # Include header files.
-  set(headers)
-  if(builtin)
-    if(HAVE_SYS_TYPES_H)
-      set(headers "${headers}#include <sys/types.h>\n")
-    endif()
-    if(HAVE_STDINT_H)
-      set(headers "${headers}#include <stdint.h>\n")
-    endif()
-    if(HAVE_STDDEF_H)
-      set(headers "${headers}#include <stddef.h>\n")
-    endif()
-  endif()
-  foreach(h ${CMAKE_EXTRA_INCLUDE_FILES})
-    set(headers "${headers}#include \"${h}\"\n")
-  endforeach()
-
-  # Perform the check.
-
-  if("${language}" STREQUAL "C")
-    set(src ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${var}.c)
-  elseif("${language}" STREQUAL "CXX")
-    set(src ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${var}.cpp)
-  else()
-    message(FATAL_ERROR "Unknown language:\n  ${language}\nSupported languages: C, CXX.\n")
-  endif()
-  set(bin ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${var}.bin)
-  configure_file(${__check_type_size_dir}/CheckTypeSize.c.in ${src} @ONLY)
-  try_compile(HAVE_${var} ${CMAKE_BINARY_DIR} ${src}
-    COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
-    LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES}
-    CMAKE_FLAGS
-      "-DCOMPILE_DEFINITIONS:STRING=${CMAKE_REQUIRED_FLAGS}"
-      "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}"
-    OUTPUT_VARIABLE output
-    COPY_FILE ${bin}
-    )
-
-  if(HAVE_${var})
-    # The check compiled.  Load information from the binary.
-    file(STRINGS ${bin} strings LIMIT_COUNT 10 REGEX "INFO:size")
-
-    # Parse the information strings.
-    set(regex_size ".*INFO:size\\[0*([^]]*)\\].*")
-    set(regex_key " key\\[([^]]*)\\]")
-    set(keys)
-    set(code)
-    set(mismatch)
-    set(first 1)
-    foreach(info ${strings})
-      if("${info}" MATCHES "${regex_size}")
-        # Get the type size.
-        set(size "${CMAKE_MATCH_1}")
-        if(first)
-          set(${var} ${size})
-        elseif(NOT "${size}" STREQUAL "${${var}}")
-          set(mismatch 1)
-        endif()
-        set(first 0)
-
-        # Get the architecture map key.
-        string(REGEX MATCH   "${regex_key}"       key "${info}")
-        string(REGEX REPLACE "${regex_key}" "\\1" key "${key}")
-        if(key)
-          set(code "${code}\nset(${var}-${key} \"${size}\")")
-          list(APPEND keys ${key})
-        endif()
-      endif()
-    endforeach()
-
-    # Update the architecture-to-size map.
-    if(mismatch AND keys)
-      configure_file(${__check_type_size_dir}/CheckTypeSizeMap.cmake.in ${map} @ONLY)
-      set(${var} 0)
-    else()
-      file(REMOVE ${map})
-    endif()
-
-    if(mismatch AND NOT keys)
-      message(SEND_ERROR "CHECK_TYPE_SIZE found different results, consider setting CMAKE_OSX_ARCHITECTURES or CMAKE_TRY_COMPILE_OSX_ARCHITECTURES to one or no architecture !")
-    endif()
-
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Check size of ${type} - done")
-    endif()
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-      "Determining size of ${type} passed with the following output:\n${output}\n\n")
-    set(${var} "${${var}}" CACHE INTERNAL "CHECK_TYPE_SIZE: sizeof(${type})")
-  else()
-    # The check failed to compile.
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Check size of ${type} - failed")
-    endif()
-    file(READ ${src} content)
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-      "Determining size of ${type} failed with the following output:\n${output}\n${src}:\n${content}\n\n")
-    set(${var} "" CACHE INTERNAL "CHECK_TYPE_SIZE: ${type} unknown")
-    file(REMOVE ${map})
-  endif()
-endfunction()
-
-#-----------------------------------------------------------------------------
-macro(CHECK_TYPE_SIZE TYPE VARIABLE)
-  # parse arguments
-  unset(doing)
-  foreach(arg ${ARGN})
-    if("x${arg}" STREQUAL "xBUILTIN_TYPES_ONLY")
-      set(_CHECK_TYPE_SIZE_${arg} 1)
-      unset(doing)
-    elseif("x${arg}" STREQUAL "xLANGUAGE") # change to MATCHES for more keys
-      set(doing "${arg}")
-      set(_CHECK_TYPE_SIZE_${doing} "")
-    elseif("x${doing}" STREQUAL "xLANGUAGE")
-      set(_CHECK_TYPE_SIZE_${doing} "${arg}")
-      unset(doing)
-    else()
-      message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
-    endif()
-  endforeach()
-  if("x${doing}" MATCHES "^x(LANGUAGE)$")
-    message(FATAL_ERROR "Missing argument:\n  ${doing} arguments requires a value\n")
-  endif()
-  if(DEFINED _CHECK_TYPE_SIZE_LANGUAGE)
-    if(NOT "x${_CHECK_TYPE_SIZE_LANGUAGE}" MATCHES "^x(C|CXX)$")
-      message(FATAL_ERROR "Unknown language:\n  ${_CHECK_TYPE_SIZE_LANGUAGE}.\nSupported languages: C, CXX.\n")
-    endif()
-    set(_language ${_CHECK_TYPE_SIZE_LANGUAGE})
-  else()
-    set(_language C)
-  endif()
-
-  # Optionally check for standard headers.
-  if(_CHECK_TYPE_SIZE_BUILTIN_TYPES_ONLY)
-    set(_builtin 0)
-  else()
-    set(_builtin 1)
-    if("${_language}" STREQUAL "C")
-      check_include_file(sys/types.h HAVE_SYS_TYPES_H)
-      check_include_file(stdint.h HAVE_STDINT_H)
-      check_include_file(stddef.h HAVE_STDDEF_H)
-    elseif("${_language}" STREQUAL "CXX")
-      check_include_file_cxx(sys/types.h HAVE_SYS_TYPES_H)
-      check_include_file_cxx(stdint.h HAVE_STDINT_H)
-      check_include_file_cxx(stddef.h HAVE_STDDEF_H)
-    endif()
-  endif()
-  unset(_CHECK_TYPE_SIZE_BUILTIN_TYPES_ONLY)
-  unset(_CHECK_TYPE_SIZE_LANGUAGE)
-
-  # Compute or load the size or size map.
-  set(${VARIABLE}_KEYS)
-  set(_map_file ${CMAKE_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${VARIABLE}.cmake)
-  if(NOT DEFINED HAVE_${VARIABLE})
-    __check_type_size_impl(${TYPE} ${VARIABLE} ${_map_file} ${_builtin} ${_language})
-  endif()
-  include(${_map_file} OPTIONAL)
-  set(_map_file)
-  set(_builtin)
-
-  # Create preprocessor code.
-  if(${VARIABLE}_KEYS)
-    set(${VARIABLE}_CODE)
-    set(_if if)
-    foreach(key ${${VARIABLE}_KEYS})
-      set(${VARIABLE}_CODE "${${VARIABLE}_CODE}#${_if} defined(${key})\n# define ${VARIABLE} ${${VARIABLE}-${key}}\n")
-      set(_if elif)
-    endforeach()
-    set(${VARIABLE}_CODE "${${VARIABLE}_CODE}#else\n# error ${VARIABLE} unknown\n#endif")
-    set(_if)
-  elseif(${VARIABLE})
-    set(${VARIABLE}_CODE "#define ${VARIABLE} ${${VARIABLE}}")
-  else()
-    set(${VARIABLE}_CODE "/* #undef ${VARIABLE} */")
-  endif()
-endmacro()
-
-#-----------------------------------------------------------------------------
-cmake_policy(POP)
diff --git a/share/cmake-3.2/Modules/CheckVariableExists.c b/share/cmake-3.2/Modules/CheckVariableExists.c
deleted file mode 100644
index 752f6e4..0000000
--- a/share/cmake-3.2/Modules/CheckVariableExists.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifdef CHECK_VARIABLE_EXISTS
-
-extern int CHECK_VARIABLE_EXISTS;
-
-#ifdef __CLASSIC_C__
-int main(){
-  int ac;
-  char*av[];
-#else
-int main(int ac, char*av[]){
-#endif
-  if(ac > 1000){return *av[0];}
-  return CHECK_VARIABLE_EXISTS;
-}
-
-#else  /* CHECK_VARIABLE_EXISTS */
-
-#  error "CHECK_VARIABLE_EXISTS has to specify the variable"
-
-#endif /* CHECK_VARIABLE_EXISTS */
diff --git a/share/cmake-3.2/Modules/Compiler/AppleClang-C.cmake b/share/cmake-3.2/Modules/Compiler/AppleClang-C.cmake
deleted file mode 100644
index 10454f6..0000000
--- a/share/cmake-3.2/Modules/Compiler/AppleClang-C.cmake
+++ /dev/null
@@ -1,34 +0,0 @@
-include(Compiler/Clang)
-__compiler_clang(C)
-
-if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.0)
-  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c90")
-  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu90")
-
-  set(CMAKE_C99_STANDARD_COMPILE_OPTION "-std=c99")
-  set(CMAKE_C99_EXTENSION_COMPILE_OPTION "-std=gnu99")
-
-  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c11")
-  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
-endif()
-
-if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.0)
-  set(CMAKE_C_STANDARD_DEFAULT 99)
-endif()
-
-macro(cmake_record_c_compile_features)
-  macro(_get_appleclang_features std_version list)
-    record_compiler_features(C "${std_version}" ${list})
-  endmacro()
-
-  set(_result 0)
-  if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.0)
-    _get_appleclang_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES)
-    if (_result EQUAL 0)
-      _get_appleclang_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES)
-    endif()
-    if (_result EQUAL 0)
-      _get_appleclang_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES)
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/AppleClang-CXX.cmake b/share/cmake-3.2/Modules/Compiler/AppleClang-CXX.cmake
deleted file mode 100644
index 5194da4..0000000
--- a/share/cmake-3.2/Modules/Compiler/AppleClang-CXX.cmake
+++ /dev/null
@@ -1,44 +0,0 @@
-include(Compiler/Clang)
-__compiler_clang(CXX)
-
-if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC")
-  set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.0)
-  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "-std=c++98")
-  set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "-std=gnu++98")
-
-  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
-  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++11")
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.1)
-  # AppleClang 5.0 knows this flag, but does not set a __cplusplus macro greater than 201103L
-  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++1y")
-  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++1y")
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.0)
-  set(CMAKE_CXX_STANDARD_DEFAULT 98)
-endif()
-
-macro(cmake_record_cxx_compile_features)
-  macro(_get_appleclang_features std_version list)
-    record_compiler_features(CXX "${std_version}" ${list})
-  endmacro()
-
-  set(_result 0)
-  if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.0)
-    set(_result 0)
-    if(CMAKE_CXX14_STANDARD_COMPILE_OPTION)
-      _get_appleclang_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES)
-    endif()
-    if (_result EQUAL 0)
-      _get_appleclang_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
-    endif()
-    if (_result EQUAL 0)
-      _get_appleclang_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES)
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-C.cmake b/share/cmake-3.2/Modules/Compiler/Clang-C.cmake
deleted file mode 100644
index 548d0a5..0000000
--- a/share/cmake-3.2/Modules/Compiler/Clang-C.cmake
+++ /dev/null
@@ -1,41 +0,0 @@
-include(Compiler/Clang)
-__compiler_clang(C)
-
-cmake_policy(GET CMP0025 appleClangPolicy)
-if(WIN32 OR (APPLE AND NOT appleClangPolicy STREQUAL NEW))
-  return()
-endif()
-
-if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4)
-  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c90")
-  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu90")
-
-  set(CMAKE_C99_STANDARD_COMPILE_OPTION "-std=c99")
-  set(CMAKE_C99_EXTENSION_COMPILE_OPTION "-std=gnu99")
-
-  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c11")
-  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
-endif()
-
-if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.6)
-  set(CMAKE_C_STANDARD_DEFAULT 11)
-elseif(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4)
-  set(CMAKE_C_STANDARD_DEFAULT 99)
-endif()
-
-macro(cmake_record_c_compile_features)
-  macro(_get_clang_features std_version list)
-    record_compiler_features(C "${std_version}" ${list})
-  endmacro()
-
-  set(_result 0)
-  if (UNIX AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4)
-    _get_clang_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES)
-    if (_result EQUAL 0)
-      _get_clang_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES)
-    endif()
-    if (_result EQUAL 0)
-      _get_clang_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES)
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-CXX-TestableFeatures.cmake b/share/cmake-3.2/Modules/Compiler/Clang-CXX-TestableFeatures.cmake
deleted file mode 100644
index b39475c..0000000
--- a/share/cmake-3.2/Modules/Compiler/Clang-CXX-TestableFeatures.cmake
+++ /dev/null
@@ -1,54 +0,0 @@
-
-set(testable_features
-  cxx_alias_templates
-  cxx_alignas
-  cxx_attributes
-  cxx_auto_type
-  cxx_binary_literals
-  cxx_constexpr
-  cxx_contextual_conversions
-  cxx_decltype
-  cxx_decltype_incomplete_return_types
-  cxx_default_function_template_args
-  cxx_defaulted_functions
-  cxx_delegating_constructors
-  cxx_deleted_functions
-  cxx_explicit_conversions
-  cxx_generalized_initializers
-  cxx_inheriting_constructors
-  cxx_lambdas
-  cxx_local_type_template_args
-  cxx_noexcept
-  cxx_nonstatic_member_init
-  cxx_nullptr
-  cxx_range_for
-  cxx_raw_string_literals
-  cxx_reference_qualified_functions
-  cxx_relaxed_constexpr
-  cxx_return_type_deduction
-  cxx_rvalue_references
-  cxx_static_assert
-  cxx_strong_enums
-  cxx_thread_local
-  cxx_unicode_literals
-  cxx_unrestricted_unions
-  cxx_user_literals
-  cxx_variable_templates
-  cxx_variadic_templates
-)
-
-foreach(feature ${testable_features})
-  set(_cmake_feature_test_${feature} "${_cmake_oldestSupported} && __has_feature(${feature})")
-endforeach()
-
-unset(testable_features)
-
-set(_cmake_feature_test_cxx_aggregate_default_initializers "${_cmake_oldestSupported} && __has_feature(cxx_aggregate_nsdmi)")
-
-set(_cmake_feature_test_cxx_trailing_return_types "${_cmake_oldestSupported} && __has_feature(cxx_trailing_return)")
-set(_cmake_feature_test_cxx_alignof "${_cmake_oldestSupported} && __has_feature(cxx_alignas)")
-set(_cmake_feature_test_cxx_final "${_cmake_oldestSupported} && __has_feature(cxx_override_control)")
-set(_cmake_feature_test_cxx_override "${_cmake_oldestSupported} && __has_feature(cxx_override_control)")
-set(_cmake_feature_test_cxx_uniform_initialization "${_cmake_oldestSupported} && __has_feature(cxx_generalized_initializers)")
-set(_cmake_feature_test_cxx_defaulted_move_initializers "${_cmake_oldestSupported} && __has_feature(cxx_defaulted_functions)")
-set(_cmake_feature_test_cxx_lambda_init_captures "${_cmake_oldestSupported} && __has_feature(cxx_init_captures)")
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-CXX.cmake b/share/cmake-3.2/Modules/Compiler/Clang-CXX.cmake
deleted file mode 100644
index 84b2c74..0000000
--- a/share/cmake-3.2/Modules/Compiler/Clang-CXX.cmake
+++ /dev/null
@@ -1,53 +0,0 @@
-include(Compiler/Clang)
-__compiler_clang(CXX)
-
-if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC")
-  set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
-endif()
-
-cmake_policy(GET CMP0025 appleClangPolicy)
-if(WIN32 OR (APPLE AND NOT appleClangPolicy STREQUAL NEW))
-  return()
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 2.1)
-  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "-std=c++98")
-  set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "-std=gnu++98")
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.1)
-  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
-  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++11")
-elseif(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 2.1)
-  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++0x")
-  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++0x")
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.5)
-  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++14")
-  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++14")
-elseif(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4)
-  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++1y")
-  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++1y")
-endif()
-
-if(UNIX AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4)
-  set(CMAKE_CXX_STANDARD_DEFAULT 98)
-endif()
-
-macro(cmake_record_cxx_compile_features)
-  macro(_get_clang_features std_version list)
-    record_compiler_features(CXX "${std_version}" ${list})
-  endmacro()
-
-  set(_result 0)
-  if (UNIX AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4)
-    _get_clang_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES)
-    if (_result EQUAL 0)
-      _get_clang_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
-    endif()
-    if (_result EQUAL 0)
-      _get_clang_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES)
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/Cray-DetermineCompiler.cmake b/share/cmake-3.2/Modules/Compiler/Cray-DetermineCompiler.cmake
deleted file mode 100644
index 881b82c..0000000
--- a/share/cmake-3.2/Modules/Compiler/Cray-DetermineCompiler.cmake
+++ /dev/null
@@ -1,6 +0,0 @@
-
-set(_compiler_id_pp_test "defined(_CRAYC)")
-
-set(_compiler_id_version_compute "
-# define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_DEC@(_RELEASE)
-# define @PREFIX@COMPILER_VERSION_MINOR @MACRO_DEC@(_RELEASE_MINOR)")
diff --git a/share/cmake-3.2/Modules/Compiler/Embarcadero-DetermineCompiler.cmake b/share/cmake-3.2/Modules/Compiler/Embarcadero-DetermineCompiler.cmake
deleted file mode 100644
index 2feedac..0000000
--- a/share/cmake-3.2/Modules/Compiler/Embarcadero-DetermineCompiler.cmake
+++ /dev/null
@@ -1,7 +0,0 @@
-
-set(_compiler_id_pp_test "defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)")
-
-set(_compiler_id_version_compute "
-# define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_HEX@(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define @PREFIX@COMPILER_VERSION_MINOR @MACRO_HEX@(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define @PREFIX@COMPILER_VERSION_PATCH @MACRO_HEX@(__CODEGEARC_VERSION__     & 0xFFFF)")
diff --git a/share/cmake-3.2/Modules/Compiler/GNU-C.cmake b/share/cmake-3.2/Modules/Compiler/GNU-C.cmake
deleted file mode 100644
index 89704e6..0000000
--- a/share/cmake-3.2/Modules/Compiler/GNU-C.cmake
+++ /dev/null
@@ -1,48 +0,0 @@
-include(Compiler/GNU)
-__compiler_gnu(C)
-
-if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.5)
-  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c90")
-  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu90")
-elseif (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
-  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c89")
-  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu89")
-endif()
-
-if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
-  set(CMAKE_C99_STANDARD_COMPILE_OPTION "-std=c99")
-  set(CMAKE_C99_EXTENSION_COMPILE_OPTION "-std=gnu99")
-endif()
-
-if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7)
-  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c11")
-  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
-elseif (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.6)
-  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c1x")
-  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu1x")
-endif()
-
-if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0)
-  set(CMAKE_C_STANDARD_DEFAULT 11)
-elseif(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
-  set(CMAKE_C_STANDARD_DEFAULT 90)
-endif()
-
-macro(cmake_record_c_compile_features)
-  macro(_get_gcc_features std_version list)
-    record_compiler_features(C "${std_version}" ${list})
-  endmacro()
-
-  set(_result 0)
-  if (UNIX AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.6)
-    _get_gcc_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES)
-  endif()
-  if (UNIX AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
-    if (_result EQUAL 0)
-      _get_gcc_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES)
-    endif()
-    if (_result EQUAL 0)
-      _get_gcc_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES)
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/GNU-CXX.cmake b/share/cmake-3.2/Modules/Compiler/GNU-CXX.cmake
deleted file mode 100644
index 86a31e4..0000000
--- a/share/cmake-3.2/Modules/Compiler/GNU-CXX.cmake
+++ /dev/null
@@ -1,58 +0,0 @@
-include(Compiler/GNU)
-__compiler_gnu(CXX)
-
-if (WIN32)
-  if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.6)
-    set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fno-keep-inline-dllexport")
-  endif()
-else()
-  if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.2)
-    set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
-  endif()
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
-  # Supported since 4.3
-  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "-std=c++98")
-  set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "-std=gnu++98")
-endif()
-
-if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.7)
-  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
-  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++11")
-elseif (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
-  # 4.3 supports 0x variants
-  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++0x")
-  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++0x")
-endif()
-
-if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9)
-  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++14")
-  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++14")
-elseif (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8)
-  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++1y")
-  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++1y")
-endif()
-
-if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
-  set(CMAKE_CXX_STANDARD_DEFAULT 98)
-endif()
-
-macro(cmake_record_cxx_compile_features)
-  macro(_get_gcc_features std_version list)
-    record_compiler_features(CXX "${std_version}" ${list})
-  endmacro()
-
-  set(_result 0)
-  if (UNIX AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8)
-    _get_gcc_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES)
-  endif()
-  if (UNIX AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
-    if (_result EQUAL 0)
-      _get_gcc_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
-    endif()
-    if (_result EQUAL 0)
-      _get_gcc_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES)
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/GNU-DetermineCompiler.cmake b/share/cmake-3.2/Modules/Compiler/GNU-DetermineCompiler.cmake
deleted file mode 100644
index 261f148..0000000
--- a/share/cmake-3.2/Modules/Compiler/GNU-DetermineCompiler.cmake
+++ /dev/null
@@ -1,9 +0,0 @@
-
-set(_compiler_id_pp_test "defined(__GNUC__)")
-
-set(_compiler_id_version_compute "
-# define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_DEC@(__GNUC__)
-# define @PREFIX@COMPILER_VERSION_MINOR @MACRO_DEC@(__GNUC_MINOR__)
-# if defined(__GNUC_PATCHLEVEL__)
-#  define @PREFIX@COMPILER_VERSION_PATCH @MACRO_DEC@(__GNUC_PATCHLEVEL__)
-# endif")
diff --git a/share/cmake-3.2/Modules/Compiler/GNU-Fortran.cmake b/share/cmake-3.2/Modules/Compiler/GNU-Fortran.cmake
deleted file mode 100644
index dfd7927..0000000
--- a/share/cmake-3.2/Modules/Compiler/GNU-Fortran.cmake
+++ /dev/null
@@ -1,12 +0,0 @@
-include(Compiler/GNU)
-__compiler_gnu(Fortran)
-
-set(CMAKE_Fortran_FORMAT_FIXED_FLAG "-ffixed-form")
-set(CMAKE_Fortran_FORMAT_FREE_FLAG "-ffree-form")
-
-# No -DNDEBUG for Fortran.
-set(CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "-Os")
-set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-O3")
-
-# Fortran-specific feature flags.
-set(CMAKE_Fortran_MODDIR_FLAG -J)
diff --git a/share/cmake-3.2/Modules/Compiler/GNU.cmake b/share/cmake-3.2/Modules/Compiler/GNU.cmake
deleted file mode 100644
index f01255c..0000000
--- a/share/cmake-3.2/Modules/Compiler/GNU.cmake
+++ /dev/null
@@ -1,58 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__COMPILER_GNU)
-  return()
-endif()
-set(__COMPILER_GNU 1)
-
-macro(__compiler_gnu lang)
-  # Feature flags.
-  set(CMAKE_${lang}_VERBOSE_FLAG "-v")
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "-fPIC")
-  if(NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 3.4)
-    set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "-fPIE")
-  endif()
-  if(NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4.2)
-    set(CMAKE_${lang}_COMPILE_OPTIONS_VISIBILITY "-fvisibility=")
-  endif()
-  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "-fPIC")
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-shared")
-  set(CMAKE_${lang}_COMPILE_OPTIONS_SYSROOT "--sysroot=")
-
-  # Older versions of gcc (< 4.5) contain a bug causing them to report a missing
-  # header file as a warning if depfiles are enabled, causing check_header_file
-  # tests to always succeed.  Work around this by disabling dependency tracking
-  # in try_compile mode.
-  get_property(_IN_TC GLOBAL PROPERTY IN_TRY_COMPILE)
-  if(NOT _IN_TC OR CMAKE_FORCE_DEPFILES)
-    # distcc does not transform -o to -MT when invoking the preprocessor
-    # internally, as it ought to.  Work around this bug by setting -MT here
-    # even though it isn't strictly necessary.
-    set(CMAKE_DEPFILE_FLAGS_${lang} "-MMD -MT <OBJECT> -MF <DEPFILE>")
-  endif()
-
-  # Initial configuration flags.
-  set(CMAKE_${lang}_FLAGS_INIT "")
-  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-g")
-  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-Os -DNDEBUG")
-  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-O3 -DNDEBUG")
-  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-O2 -g -DNDEBUG")
-  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-  if(NOT APPLE)
-    set(CMAKE_INCLUDE_SYSTEM_FLAG_${lang} "-isystem ")
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/HP-C.cmake b/share/cmake-3.2/Modules/Compiler/HP-C.cmake
deleted file mode 100644
index 6dddcba..0000000
--- a/share/cmake-3.2/Modules/Compiler/HP-C.cmake
+++ /dev/null
@@ -1,4 +0,0 @@
-set(CMAKE_C_VERBOSE_FLAG "-v")
-
-set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/HP-CXX.cmake b/share/cmake-3.2/Modules/Compiler/HP-CXX.cmake
deleted file mode 100644
index 6411dac..0000000
--- a/share/cmake-3.2/Modules/Compiler/HP-CXX.cmake
+++ /dev/null
@@ -1,13 +0,0 @@
-set(CMAKE_CXX_VERBOSE_FLAG "-v")
-
-set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-
-# HP aCC since version 3.80 supports the flag +hpxstd98 to get ANSI C++98
-# template support. It is known that version 6.25 doesn't need that flag.
-# Current assumption: the flag is needed for every version from 3.80 to 4
-# to get it working.
-if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4 AND
-   NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.80)
-  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "+hpxstd98")
-endif()
diff --git a/share/cmake-3.2/Modules/Compiler/HP-Fortran.cmake b/share/cmake-3.2/Modules/Compiler/HP-Fortran.cmake
deleted file mode 100644
index ad821ab..0000000
--- a/share/cmake-3.2/Modules/Compiler/HP-Fortran.cmake
+++ /dev/null
@@ -1,6 +0,0 @@
-set(CMAKE_Fortran_VERBOSE_FLAG "-v")
-set(CMAKE_Fortran_FORMAT_FIXED_FLAG "+source=fixed")
-set(CMAKE_Fortran_FORMAT_FREE_FLAG "+source=free")
-
-set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/IAR-ASM.cmake b/share/cmake-3.2/Modules/Compiler/IAR-ASM.cmake
deleted file mode 100644
index 66fb052..0000000
--- a/share/cmake-3.2/Modules/Compiler/IAR-ASM.cmake
+++ /dev/null
@@ -1,14 +0,0 @@
-# This file is processed when the IAR compiler is used for an assembler file
-
-include(Compiler/IAR)
-
-set(CMAKE_ASM_COMPILE_OBJECT  "<CMAKE_ASM_COMPILER> <SOURCE> <DEFINES> <FLAGS> -o <OBJECT>")
-
-if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "ARM")
-  set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS s;asm;msa)
-endif()
-
-
-if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "AVR")
-  set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS s90;asm;msa)
-endif()
diff --git a/share/cmake-3.2/Modules/Compiler/IAR-C.cmake b/share/cmake-3.2/Modules/Compiler/IAR-C.cmake
deleted file mode 100644
index da29447..0000000
--- a/share/cmake-3.2/Modules/Compiler/IAR-C.cmake
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is processed when the IAR compiler is used for a C file
-
-
-include(Compiler/IAR)
-
-set(CMAKE_C_COMPILE_OBJECT             "<CMAKE_C_COMPILER> <SOURCE> <DEFINES> <FLAGS> -o <OBJECT>")
-set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <SOURCE> <DEFINES> <FLAGS> --preprocess=cnl <PREPROCESSED_SOURCE>")
-set(CMAKE_C_CREATE_ASSEMBLY_SOURCE     "<CMAKE_C_COMPILER> <SOURCE> <DEFINES> <FLAGS> -lAH <ASSEMBLY_SOURCE> -o <OBJECT>.dummy")
-
-# The toolchains for ARM and AVR are quite different:
-if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "ARM")
-
-  set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
-  set(CMAKE_C_CREATE_STATIC_LIBRARY "<CMAKE_AR> <TARGET> --create <LINK_FLAGS> <OBJECTS> ")
-
-endif()
-
-
-if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "AVR")
-  set(CMAKE_C_OUTPUT_EXTENSION ".r90")
-
-  if(NOT CMAKE_C_LINK_FLAGS)
-    set(CMAKE_C_LINK_FLAGS "-Fmotorola")
-  endif()
-
-  set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
-  set(CMAKE_C_CREATE_STATIC_LIBRARY "<CMAKE_AR> -o <TARGET> <OBJECTS> ")
-
-endif()
-
-# add the target specific include directory:
-get_filename_component(_compilerDir "${CMAKE_C_COMPILER}" PATH)
-get_filename_component(_compilerDir "${_compilerDir}" PATH)
-include_directories("${_compilerDir}/inc" )
diff --git a/share/cmake-3.2/Modules/Compiler/IAR-CXX.cmake b/share/cmake-3.2/Modules/Compiler/IAR-CXX.cmake
deleted file mode 100644
index eae9d1b..0000000
--- a/share/cmake-3.2/Modules/Compiler/IAR-CXX.cmake
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is processed when the IAR compiler is used for a C++ file
-
-include(Compiler/IAR)
-
-set(CMAKE_CXX_COMPILE_OBJECT  "<CMAKE_CXX_COMPILER> <SOURCE> <DEFINES> <FLAGS> -o <OBJECT>")
-
-set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <SOURCE> <DEFINES> <FLAGS> --preprocess=cnl <PREPROCESSED_SOURCE>")
-set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE     "<CMAKE_CXX_COMPILER> <SOURCE> <DEFINES> <FLAGS> -lAH <ASSEMBLY_SOURCE> -o <OBJECT>.dummy")
-
-
-
-if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "ARM")
-
-  set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
-  set(CMAKE_CXX_CREATE_STATIC_LIBRARY "<CMAKE_AR> <TARGET> --create <LINK_FLAGS> <OBJECTS> ")
-
-endif()
-
-
-if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "AVR")
-  set(CMAKE_CXX_OUTPUT_EXTENSION ".r90")
-  if(NOT CMAKE_CXX_LINK_FLAGS)
-    set(CMAKE_CXX_LINK_FLAGS "-Fmotorola")
-  endif()
-
-  set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
-  set(CMAKE_CXX_CREATE_STATIC_LIBRARY "<CMAKE_AR> -o <TARGET> <OBJECTS> ")
-
-endif()
-
-# add the target specific include directory:
-get_filename_component(_compilerDir "${CMAKE_C_COMPILER}" PATH)
-get_filename_component(_compilerDir "${_compilerDir}" PATH)
-include_directories("${_compilerDir}/inc")
diff --git a/share/cmake-3.2/Modules/Compiler/IAR.cmake b/share/cmake-3.2/Modules/Compiler/IAR.cmake
deleted file mode 100644
index 00e4713..0000000
--- a/share/cmake-3.2/Modules/Compiler/IAR.cmake
+++ /dev/null
@@ -1,46 +0,0 @@
-# This file is processed when the IAR compiler is used for a C or C++ file
-# Documentation can be downloaded here: http://www.iar.com/website1/1.0.1.0/675/1/
-# The initial feature request is here: http://www.cmake.org/Bug/view.php?id=10176
-# It also contains additional links and information.
-
-if(_IAR_CMAKE_LOADED)
-  return()
-endif()
-set(_IAR_CMAKE_LOADED TRUE)
-
-
-get_filename_component(_CMAKE_C_TOOLCHAIN_LOCATION "${CMAKE_C_COMPILER}" PATH)
-get_filename_component(_CMAKE_CXX_TOOLCHAIN_LOCATION "${CMAKE_CXX_COMPILER}" PATH)
-get_filename_component(_CMAKE_ASM_TOOLCHAIN_LOCATION "${CMAKE_ASM_COMPILER}" PATH)
-
-
-if("${CMAKE_C_COMPILER}" MATCHES "arm"  OR  "${CMAKE_CXX_COMPILER}" MATCHES "arm"  OR  "${CMAKE_ASM_COMPILER}" MATCHES "arm")
-  set(CMAKE_EXECUTABLE_SUFFIX ".elf")
-
-  # For arm, IAR uses the "ilinkarm" linker and "iarchive" archiver:
-  find_program(CMAKE_IAR_LINKER ilinkarm HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}")
-  find_program(CMAKE_IAR_AR iarchive HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}" )
-
-  set(IAR_TARGET_ARCHITECTURE "ARM" CACHE STRING "IAR compiler target architecture")
-endif()
-
-if("${CMAKE_C_COMPILER}" MATCHES "avr"  OR  "${CMAKE_CXX_COMPILER}" MATCHES "avr"  OR  "${CMAKE_ASM_COMPILER}" MATCHES "avr")
-  set(CMAKE_EXECUTABLE_SUFFIX ".bin")
-
-  # For AVR and AVR32, IAR uses the "xlink" linker and the "xar" archiver:
-  find_program(CMAKE_IAR_LINKER xlink HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}" )
-  find_program(CMAKE_IAR_AR xar HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}" )
-
-  set(IAR_TARGET_ARCHITECTURE "AVR" CACHE STRING "IAR compiler target architecture")
-
-  set(CMAKE_LIBRARY_PATH_FLAG "-I")
-
-endif()
-
-if(NOT IAR_TARGET_ARCHITECTURE)
-  message(FATAL_ERROR "The IAR compiler for this architecture is not yet supported "
-          " by CMake. Please go to http://www.cmake.org/Bug and enter a feature request there.")
-endif()
-
-set(CMAKE_LINKER "${CMAKE_IAR_LINKER}" CACHE FILEPATH "The IAR linker" FORCE)
-set(CMAKE_AR "${CMAKE_IAR_AR}" CACHE FILEPATH "The IAR archiver" FORCE)
diff --git a/share/cmake-3.2/Modules/Compiler/Intel-C.cmake b/share/cmake-3.2/Modules/Compiler/Intel-C.cmake
deleted file mode 100644
index 1d651e3..0000000
--- a/share/cmake-3.2/Modules/Compiler/Intel-C.cmake
+++ /dev/null
@@ -1,12 +0,0 @@
-set(CMAKE_C_VERBOSE_FLAG "-v")
-
-set(CMAKE_C_FLAGS_INIT "")
-set(CMAKE_C_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_C_FLAGS_MINSIZEREL_INIT "-Os -DNDEBUG")
-set(CMAKE_C_FLAGS_RELEASE_INIT "-O3 -DNDEBUG")
-set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "-O2 -g -DNDEBUG")
-
-set(CMAKE_DEPFILE_FLAGS_C "-MMD -MT <OBJECT> -MF <DEPFILE>")
-
-set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/Intel-CXX.cmake b/share/cmake-3.2/Modules/Compiler/Intel-CXX.cmake
deleted file mode 100644
index 020e862..0000000
--- a/share/cmake-3.2/Modules/Compiler/Intel-CXX.cmake
+++ /dev/null
@@ -1,12 +0,0 @@
-set(CMAKE_CXX_VERBOSE_FLAG "-v")
-
-set(CMAKE_CXX_FLAGS_INIT "")
-set(CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "-Os -DNDEBUG")
-set(CMAKE_CXX_FLAGS_RELEASE_INIT "-O3 -DNDEBUG")
-set(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-O2 -g -DNDEBUG")
-
-set(CMAKE_DEPFILE_FLAGS_CXX "-MMD -MT <OBJECT> -MF <DEPFILE>")
-
-set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/Intel-Fortran.cmake b/share/cmake-3.2/Modules/Compiler/Intel-Fortran.cmake
deleted file mode 100644
index 9ebac5a..0000000
--- a/share/cmake-3.2/Modules/Compiler/Intel-Fortran.cmake
+++ /dev/null
@@ -1,12 +0,0 @@
-set(CMAKE_Fortran_FLAGS_INIT "")
-set(CMAKE_Fortran_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "-Os")
-set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-O3")
-set(CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "-O2 -g")
-set(CMAKE_Fortran_MODDIR_FLAG "-module ")
-set(CMAKE_Fortran_VERBOSE_FLAG "-v")
-set(CMAKE_Fortran_FORMAT_FIXED_FLAG "-fixed")
-set(CMAKE_Fortran_FORMAT_FREE_FLAG "-free")
-
-set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/MSVC-CXX-FeatureTests.cmake b/share/cmake-3.2/Modules/Compiler/MSVC-CXX-FeatureTests.cmake
deleted file mode 100644
index c770211..0000000
--- a/share/cmake-3.2/Modules/Compiler/MSVC-CXX-FeatureTests.cmake
+++ /dev/null
@@ -1,106 +0,0 @@
-
-# Reference: http://msdn.microsoft.com/en-us/library/vstudio/hh567368.aspx
-# http://blogs.msdn.com/b/vcblog/archive/2013/06/28/c-11-14-stl-features-fixes-and-breaking-changes-in-vs-2013.aspx
-# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
-# http://www.visualstudio.com/en-us/news/vs2015-preview-vs.aspx
-
-
-set(_cmake_oldestSupported "_MSC_VER >= 1600")
-
-set(MSVC_2015 "_MSC_VER >= 1900")
-set(_cmake_feature_test_cxx_alignas "${MSVC_2015}")
-set(_cmake_feature_test_cxx_alignof "${MSVC_2015}")
-set(_cmake_feature_test_cxx_binary_literals "${MSVC_2015}")
-set(_cmake_feature_test_cxx_decltype_auto "${MSVC_2015}")
-# Digit separators are not available as of VS 2015 Preview, but a footnote
-# says they will be available in the RTM.
-set(_cmake_feature_test_cxx_digit_separators "${MSVC_2015}")
-set(_cmake_feature_test_cxx_func_identifier "${MSVC_2015}")
-# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
-# Note 1. While previous version of VisualStudio said they supported these
-# they silently produced bad code, and are now marked as having partial
-# support in previous versions. The footnote says the support will be complete
-# in MSVC 2015, so support the feature for that version, assuming that is true.
-set(_cmake_feature_test_cxx_generalized_initializers "${MSVC_2015}")
-set(_cmake_feature_test_cxx_nonstatic_member_init "${MSVC_2015}")
-# Microsoft calls this 'rvalue references v3'
-set(_cmake_feature_test_cxx_defaulted_move_initializers "${MSVC_2015}")
-set(_cmake_feature_test_cxx_generic_lambdas "${MSVC_2015}")
-set(_cmake_feature_test_cxx_inheriting_constructors "${MSVC_2015}")
-set(_cmake_feature_test_cxx_inline_namespaces "${MSVC_2015}")
-set(_cmake_feature_test_cxx_lambda_init_captures "${MSVC_2015}")
-set(_cmake_feature_test_cxx_noexcept "${MSVC_2015}")
-set(_cmake_feature_test_cxx_return_type_deduction "${MSVC_2015}")
-set(_cmake_feature_test_cxx_sizeof_member "${MSVC_2015}")
-set(_cmake_feature_test_cxx_thread_local "${MSVC_2015}")
-set(_cmake_feature_test_cxx_unicode_literals "${MSVC_2015}")
-set(_cmake_feature_test_cxx_unrestricted_unions "${MSVC_2015}")
-set(_cmake_feature_test_cxx_user_literals "${MSVC_2015}")
-set(_cmake_feature_test_cxx_reference_qualified_functions "${MSVC_2015}")
-# "The copies and moves don't interact precisely like the Standard says they
-# should. For example, deletion of moves is specified to also suppress
-# copies, but Visual C++ in Visual Studio 2013 does not."
-# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
-# lists this as 'partial' in 2013
-set(_cmake_feature_test_cxx_deleted_functions "${MSVC_2015}")
-
-set(MSVC_2013 "_MSC_VER >= 1800")
-set(_cmake_feature_test_cxx_alias_templates "${MSVC_2013}")
-# Microsoft now states they support contextual conversions in 2013 and above.
-# See footnote 6 at:
-# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
-set(_cmake_feature_test_cxx_contextual_conversions "${MSVC_2013}")
-set(_cmake_feature_test_cxx_default_function_template_args "${MSVC_2013}")
-set(_cmake_feature_test_cxx_defaulted_functions "${MSVC_2013}")
-set(_cmake_feature_test_cxx_delegating_constructors "${MSVC_2013}")
-set(_cmake_feature_test_cxx_explicit_conversions "${MSVC_2013}")
-set(_cmake_feature_test_cxx_raw_string_literals "${MSVC_2013}")
-set(_cmake_feature_test_cxx_uniform_initialization "${MSVC_2013}")
-# Support is documented, but possibly partly broken:
-# https://msdn.microsoft.com/en-us/library/hh567368.aspx
-# http://thread.gmane.org/gmane.comp.lib.boost.devel/244986/focus=245333
-set(_cmake_feature_test_cxx_variadic_templates "${MSVC_2013}")
-
-set(MSVC_2012 "_MSC_VER >= 1700")
-set(_cmake_feature_test_cxx_enum_forward_declarations "${MSVC_2012}")
-set(_cmake_feature_test_cxx_final "${MSVC_2012}")
-set(_cmake_feature_test_cxx_range_for "${MSVC_2012}")
-set(_cmake_feature_test_cxx_strong_enums "${MSVC_2012}")
-
-set(MSVC_2010 "_MSC_VER >= 1600")
-set(_cmake_feature_test_cxx_auto_type "${MSVC_2010}")
-set(_cmake_feature_test_cxx_decltype "${MSVC_2010}")
-set(_cmake_feature_test_cxx_extended_friend_declarations "${MSVC_2010}")
-set(_cmake_feature_test_cxx_extern_templates "${MSVC_2010}")
-set(_cmake_feature_test_cxx_lambdas "${MSVC_2010}")
-set(_cmake_feature_test_cxx_local_type_template_args "${MSVC_2010}")
-set(_cmake_feature_test_cxx_long_long_type "${MSVC_2010}")
-set(_cmake_feature_test_cxx_nullptr "${MSVC_2010}")
-set(_cmake_feature_test_cxx_override "${MSVC_2010}")
-set(_cmake_feature_test_cxx_right_angle_brackets "${MSVC_2010}")
-set(_cmake_feature_test_cxx_rvalue_references "${MSVC_2010}")
-set(_cmake_feature_test_cxx_static_assert "${MSVC_2010}")
-set(_cmake_feature_test_cxx_template_template_parameters "${MSVC_2010}")
-set(_cmake_feature_test_cxx_trailing_return_types "${MSVC_2010}")
-set(_cmake_feature_test_cxx_variadic_macros "${MSVC_2010}")
-
-# Currently unsupported:
-# set(_cmake_feature_test_cxx_constexpr )
-# set(_cmake_feature_test_cxx_relaxed_constexpr )
-# set(_cmake_feature_test_cxx_attributes )
-# set(_cmake_feature_test_cxx_attribute_deprecated )
-# 'NSDMIs for aggregates'
-# set(_cmake_feature_test_cxx_aggregate_default_initializers )
-# set(_cmake_feature_test_cxx_variable_templates )
-
-# In theory decltype incomplete return types was added in 2012
-# but without support for decltype_auto and return type deduction this
-# feature is unusable.  This remains so as of VS 2015 Preview.
-# set(_cmake_feature_test_cxx_decltype_incomplete_return_types )
-
-# Unset all the variables that we don't need exposed.
-# _cmake_oldestSupported is required by WriteCompilerDetectionHeader
-set(MSVC_2015)
-set(MSVC_2013)
-set(MSVC_2012)
-set(MSVC_2010)
diff --git a/share/cmake-3.2/Modules/Compiler/PGI.cmake b/share/cmake-3.2/Modules/Compiler/PGI.cmake
deleted file mode 100644
index 162e3c9..0000000
--- a/share/cmake-3.2/Modules/Compiler/PGI.cmake
+++ /dev/null
@@ -1,35 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__COMPILER_PGI)
-  return()
-endif()
-set(__COMPILER_PGI 1)
-
-macro(__compiler_pgi lang)
-  # Feature flags.
-  set(CMAKE_${lang}_VERBOSE_FLAG "-v")
-
-  # Initial configuration flags.
-  set(CMAKE_${lang}_FLAGS_INIT "")
-  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-g -O0")
-  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-O2 -s")
-  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-fast -O3 -Mipa=fast")
-  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-O2 -gopt")
-
-  # Preprocessing and assembly rules.
-  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/QCC-CXX.cmake b/share/cmake-3.2/Modules/Compiler/QCC-CXX.cmake
deleted file mode 100644
index a676bbe..0000000
--- a/share/cmake-3.2/Modules/Compiler/QCC-CXX.cmake
+++ /dev/null
@@ -1,12 +0,0 @@
-include(Compiler/QCC)
-__compiler_qcc(CXX)
-
-# If the toolchain uses qcc for CMAKE_CXX_COMPILER instead of QCC, the
-# default for the driver is not c++.
-set(CMAKE_CXX_COMPILE_OBJECT
-  "<CMAKE_CXX_COMPILER> -lang-c++ <DEFINES> <FLAGS> -o <OBJECT> -c <SOURCE>")
-
-set(CMAKE_CXX_LINK_EXECUTABLE
-  "<CMAKE_CXX_COMPILER> -lang-c++ <FLAGS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
-
-set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
diff --git a/share/cmake-3.2/Modules/Compiler/QCC.cmake b/share/cmake-3.2/Modules/Compiler/QCC.cmake
deleted file mode 100644
index 76477e4..0000000
--- a/share/cmake-3.2/Modules/Compiler/QCC.cmake
+++ /dev/null
@@ -1,24 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2014 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-include(Compiler/GNU)
-
-macro(__compiler_qcc lang)
-  __compiler_gnu(${lang})
-
-  # http://www.qnx.com/developers/docs/6.4.0/neutrino/utilities/q/qcc.html#examples
-  set(CMAKE_${lang}_COMPILE_OPTIONS_TARGET "-V")
-
-  set(CMAKE_INCLUDE_SYSTEM_FLAG_${lang} "-Wp,-isystem,")
-  set(CMAKE_DEPFILE_FLAGS_${lang} "-Wc,-MMD,<DEPFILE>,-MT,<OBJECT>,-MF,<DEPFILE>")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/SunPro-C.cmake b/share/cmake-3.2/Modules/Compiler/SunPro-C.cmake
deleted file mode 100644
index c5b5203..0000000
--- a/share/cmake-3.2/Modules/Compiler/SunPro-C.cmake
+++ /dev/null
@@ -1,27 +0,0 @@
-set(CMAKE_C_VERBOSE_FLAG "-#")
-
-set(CMAKE_C_COMPILE_OPTIONS_PIC -KPIC)
-set(CMAKE_C_COMPILE_OPTIONS_PIE -KPIE)
-set(CMAKE_SHARED_LIBRARY_C_FLAGS "-KPIC")
-set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-G")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-R")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":")
-set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-h")
-
-set(CMAKE_C_FLAGS_INIT "")
-set(CMAKE_C_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_C_FLAGS_MINSIZEREL_INIT "-xO2 -xspace -DNDEBUG")
-set(CMAKE_C_FLAGS_RELEASE_INIT "-xO3 -DNDEBUG")
-set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "-g -xO2 -DNDEBUG")
-
-# Initialize C link type selection flags.  These flags are used when
-# building a shared library, shared module, or executable that links
-# to other libraries to select whether to use the static or shared
-# versions of the libraries.
-foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-Bstatic")
-  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-Bdynamic")
-endforeach()
-
-set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/SunPro-CXX.cmake b/share/cmake-3.2/Modules/Compiler/SunPro-CXX.cmake
deleted file mode 100644
index c7bc734..0000000
--- a/share/cmake-3.2/Modules/Compiler/SunPro-CXX.cmake
+++ /dev/null
@@ -1,56 +0,0 @@
-set(CMAKE_CXX_VERBOSE_FLAG "-v")
-
-set(CMAKE_CXX_COMPILE_OPTIONS_PIC -KPIC)
-set(CMAKE_CXX_COMPILE_OPTIONS_PIE -KPIE)
-set(CMAKE_SHARED_LIBRARY_CXX_FLAGS "-KPIC")
-set(CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS "-G")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG "-R")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP ":")
-set(CMAKE_SHARED_LIBRARY_SONAME_CXX_FLAG "-h")
-
-set(CMAKE_CXX_FLAGS_INIT "")
-set(CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "-xO2 -xspace -DNDEBUG")
-set(CMAKE_CXX_FLAGS_RELEASE_INIT "-xO3 -DNDEBUG")
-set(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-g -xO2 -DNDEBUG")
-
-# Initialize C link type selection flags.  These flags are used when
-# building a shared library, shared module, or executable that links
-# to other libraries to select whether to use the static or shared
-# versions of the libraries.
-foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-  set(CMAKE_${type}_LINK_STATIC_CXX_FLAGS "-Bstatic")
-  set(CMAKE_${type}_LINK_DYNAMIC_CXX_FLAGS "-Bdynamic")
-endforeach()
-
-set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-
-# Create archives with "CC -xar" in case user adds "-instances=extern"
-# so that template instantiations are available to archive members.
-set(CMAKE_CXX_CREATE_STATIC_LIBRARY
-  "<CMAKE_CXX_COMPILER> -xar -o <TARGET> <OBJECTS> "
-  "<CMAKE_RANLIB> <TARGET> ")
-
-if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.13)
-  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
-  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=c++11")
-endif()
-
-if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.13)
-  set(CMAKE_CXX_STANDARD_DEFAULT 98)
-endif()
-
-macro(cmake_record_cxx_compile_features)
-  macro(_get_solaris_studio_features std_version list)
-    record_compiler_features(CXX "${std_version}" ${list})
-  endmacro()
-
-  set(_result 0)
-  if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.13)
-    _get_solaris_studio_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
-    if (_result EQUAL 0)
-      _get_solaris_studio_features("" CMAKE_CXX98_COMPILE_FEATURES)
-    endif()
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/SunPro-Fortran.cmake b/share/cmake-3.2/Modules/Compiler/SunPro-Fortran.cmake
deleted file mode 100644
index e4db1e8..0000000
--- a/share/cmake-3.2/Modules/Compiler/SunPro-Fortran.cmake
+++ /dev/null
@@ -1,21 +0,0 @@
-set(CMAKE_Fortran_VERBOSE_FLAG "-v")
-set(CMAKE_Fortran_FORMAT_FIXED_FLAG "-fixed")
-set(CMAKE_Fortran_FORMAT_FREE_FLAG "-free")
-
-set(CMAKE_SHARED_LIBRARY_Fortran_FLAGS "-KPIC")
-set(CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS "-G")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG "-R")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP ":")
-set(CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG "-h")
-set(CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG "-R")
-
-set(CMAKE_Fortran_FLAGS_INIT "")
-set(CMAKE_Fortran_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "-xO2 -xspace -DNDEBUG")
-set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-xO3 -DNDEBUG")
-set(CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "-g -xO2 -DNDEBUG")
-set(CMAKE_Fortran_MODDIR_FLAG "-moddir=")
-set(CMAKE_Fortran_MODPATH_FLAG "-M")
-
-set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -F <SOURCE> -o <PREPROCESSED_SOURCE>")
-set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/TI-ASM.cmake b/share/cmake-3.2/Modules/Compiler/TI-ASM.cmake
deleted file mode 100644
index e097626..0000000
--- a/share/cmake-3.2/Modules/Compiler/TI-ASM.cmake
+++ /dev/null
@@ -1,8 +0,0 @@
-set(CMAKE_LIBRARY_PATH_FLAG "--search_path=")
-set(CMAKE_LINK_LIBRARY_FLAG "--library=")
-set(CMAKE_INCLUDE_FLAG_ASM "--include_path=")
-
-set(CMAKE_ASM_COMPILE_OBJECT  "<CMAKE_ASM_COMPILER> --compile_only --asm_file=<SOURCE> <DEFINES> <FLAGS> --output_file=<OBJECT>")
-set(CMAKE_ASM_LINK_EXECUTABLE "<CMAKE_ASM_COMPILER> <OBJECTS> --run_linker --output_file=<TARGET> <CMAKE_ASM_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>")
-
-set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS asm;s;abs)
diff --git a/share/cmake-3.2/Modules/Compiler/TI-C.cmake b/share/cmake-3.2/Modules/Compiler/TI-C.cmake
deleted file mode 100644
index b580994..0000000
--- a/share/cmake-3.2/Modules/Compiler/TI-C.cmake
+++ /dev/null
@@ -1,10 +0,0 @@
-set(CMAKE_LIBRARY_PATH_FLAG "--search_path=")
-set(CMAKE_LINK_LIBRARY_FLAG "--library=")
-set(CMAKE_INCLUDE_FLAG_C "--include_path=")
-
-set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> --compile_only --skip_assembler --c_file=<SOURCE> <DEFINES> <FLAGS> --output_file=<ASSEMBLY_SOURCE>")
-set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> --preproc_only --c_file=<SOURCE> <DEFINES> <FLAGS> --output_file=<PREPROCESSED_SOURCE>")
-
-set(CMAKE_C_COMPILE_OBJECT  "<CMAKE_C_COMPILER> --compile_only --c_file=<SOURCE> <DEFINES> <FLAGS> --output_file=<OBJECT>")
-set(CMAKE_C_ARCHIVE_CREATE "<CMAKE_AR> -r <TARGET> <OBJECTS>")
-set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_C_COMPILER> --run_linker --output_file=<TARGET> --map_file=<TARGET>.map <CMAKE_C_LINK_FLAGS> <LINK_LIBRARIES> <LINK_FLAGS> <OBJECTS>")
diff --git a/share/cmake-3.2/Modules/Compiler/TI-CXX.cmake b/share/cmake-3.2/Modules/Compiler/TI-CXX.cmake
deleted file mode 100644
index 8cf5ac3..0000000
--- a/share/cmake-3.2/Modules/Compiler/TI-CXX.cmake
+++ /dev/null
@@ -1,10 +0,0 @@
-set(CMAKE_LIBRARY_PATH_FLAG "--search_path=")
-set(CMAKE_LINK_LIBRARY_FLAG "--library=")
-set(CMAKE_INCLUDE_FLAG_CXX "--include_path=")
-
-set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> --compile_only --skip_assembler --cpp_file=<SOURCE> <DEFINES> <FLAGS> --output_file=<ASSEMBLY_SOURCE>")
-set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> --preproc_only --cpp_file=<SOURCE> <DEFINES> <FLAGS> --output_file=<PREPROCESSED_SOURCE>")
-
-set(CMAKE_CXX_COMPILE_OBJECT  "<CMAKE_CXX_COMPILER> --compile_only --cpp_file=<SOURCE> <DEFINES> <FLAGS> --output_file=<OBJECT>")
-set(CMAKE_CXX_ARCHIVE_CREATE "<CMAKE_AR> -r <TARGET> <OBJECTS>")
-set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_CXX_COMPILER> --run_linker --output_file=<TARGET> --map_file=<TARGET>.map <CMAKE_CXX_LINK_FLAGS> <LINK_LIBRARIES> <LINK_FLAGS> <OBJECTS>")
diff --git a/share/cmake-3.2/Modules/Compiler/XL-ASM.cmake b/share/cmake-3.2/Modules/Compiler/XL-ASM.cmake
deleted file mode 100644
index 07507f9..0000000
--- a/share/cmake-3.2/Modules/Compiler/XL-ASM.cmake
+++ /dev/null
@@ -1,13 +0,0 @@
-set(CMAKE_ASM_VERBOSE_FLAG "-V")
-
-# -qthreaded     = Ensures that all optimizations will be thread-safe
-# -qalias=noansi = Turns off type-based aliasing completely (safer optimizer)
-# -qhalt=e       = Halt on error messages (rather than just severe errors)
-set(CMAKE_ASM_FLAGS_INIT "-qthreaded -qalias=noansi -qhalt=e -qsourcetype=assembler")
-
-set(CMAKE_ASM_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_ASM_FLAGS_RELEASE_INIT "-O -DNDEBUG")
-set(CMAKE_ASM_FLAGS_MINSIZEREL_INIT "-O -DNDEBUG")
-set(CMAKE_ASM_FLAGS_RELWITHDEBINFO_INIT "-g -DNDEBUG")
-
-set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS s )
diff --git a/share/cmake-3.2/Modules/Compiler/XL-C.cmake b/share/cmake-3.2/Modules/Compiler/XL-C.cmake
deleted file mode 100644
index 09a5529..0000000
--- a/share/cmake-3.2/Modules/Compiler/XL-C.cmake
+++ /dev/null
@@ -1,9 +0,0 @@
-include(Compiler/XL)
-__compiler_xl(C)
-set(CMAKE_C_FLAGS_RELEASE_INIT "${CMAKE_C_FLAGS_RELEASE_INIT} -DNDEBUG")
-set(CMAKE_C_FLAGS_MINSIZEREL_INIT "${CMAKE_C_FLAGS_MINSIZEREL_INIT} -DNDEBUG")
-
-# -qthreaded     = Ensures that all optimizations will be thread-safe
-# -qalias=noansi = Turns off type-based aliasing completely (safer optimizer)
-# -qhalt=e       = Halt on error messages (rather than just severe errors)
-set(CMAKE_C_FLAGS_INIT "-qthreaded -qalias=noansi -qhalt=e")
diff --git a/share/cmake-3.2/Modules/Compiler/XL-CXX.cmake b/share/cmake-3.2/Modules/Compiler/XL-CXX.cmake
deleted file mode 100644
index 6c842cd..0000000
--- a/share/cmake-3.2/Modules/Compiler/XL-CXX.cmake
+++ /dev/null
@@ -1,11 +0,0 @@
-include(Compiler/XL)
-__compiler_xl(CXX)
-set(CMAKE_CXX_FLAGS_RELEASE_INIT "${CMAKE_CXX_FLAGS_RELEASE_INIT} -DNDEBUG")
-set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "${CMAKE_CXX_FLAGS_MINSIZEREL_INIT} -DNDEBUG")
-
-# -qthreaded     = Ensures that all optimizations will be thread-safe
-# -qhalt=e       = Halt on error messages (rather than just severe errors)
-set(CMAKE_CXX_FLAGS_INIT "-qthreaded -qhalt=e")
-
-set(CMAKE_CXX_COMPILE_OBJECT
-  "<CMAKE_CXX_COMPILER> -+ <DEFINES> <FLAGS> -o <OBJECT> -c <SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/XL.cmake b/share/cmake-3.2/Modules/Compiler/XL.cmake
deleted file mode 100644
index 7bf5020..0000000
--- a/share/cmake-3.2/Modules/Compiler/XL.cmake
+++ /dev/null
@@ -1,54 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__COMPILER_XL)
-  return()
-endif()
-set(__COMPILER_XL 1)
-
-# Find the CreateExportList program that comes with this toolchain.
-find_program(CMAKE_XL_CreateExportList
-  NAMES CreateExportList
-  DOC "IBM XL CreateExportList tool"
-  )
-
-macro(__compiler_xl lang)
-  # Feature flags.
-  set(CMAKE_${lang}_VERBOSE_FLAG "-V")
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "-qpic")
-
-  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-g")
-  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-O")
-  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-O")
-  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-g")
-  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE     "<CMAKE_${lang}_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-
-  # CMAKE_XL_CreateExportList is part of the AIX XL compilers but not the linux ones.
-  # If we found the tool, we'll use it to create exports, otherwise stick with the regular
-  # create shared library compile line.
-  if (CMAKE_XL_CreateExportList)
-    # The compiler front-end passes all object files, archive files, and shared
-    # library files named on the command line to CreateExportList to create a
-    # list of all symbols to be exported from the shared library.  This causes
-    # all archive members to be copied into the shared library whether they are
-    # needed or not.  Instead we run the tool ourselves to pass only the object
-    # files so that we export only the symbols actually provided by the sources.
-    set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
-      "${CMAKE_XL_CreateExportList} <OBJECT_DIR>/objects.exp <OBJECTS>"
-      "<CMAKE_${lang}_COMPILER> <CMAKE_SHARED_LIBRARY_${lang}_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS> -Wl,-bE:<OBJECT_DIR>/objects.exp <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>"
-      )
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/CompilerId/VS-10.vcxproj.in b/share/cmake-3.2/Modules/CompilerId/VS-10.vcxproj.in
deleted file mode 100644
index a17d03d..0000000
--- a/share/cmake-3.2/Modules/CompilerId/VS-10.vcxproj.in
+++ /dev/null
@@ -1,55 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <ItemGroup Label="ProjectConfigurations">
-    <ProjectConfiguration Include="Debug|@id_platform@">
-      <Configuration>Debug</Configuration>
-      <Platform>@id_platform@</Platform>
-    </ProjectConfiguration>
-  </ItemGroup>
-  <PropertyGroup Label="Globals">
-    <ProjectGuid>{CAE07175-D007-4FC3-BFE8-47B392814159}</ProjectGuid>
-    <RootNamespace>CompilerId@id_lang@</RootNamespace>
-    <Keyword>Win32Proj</Keyword>
-    @id_system@
-    @id_system_version@
-    @id_WindowsSDKDesktopARMSupport@
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'" Label="Configuration">
-    <ConfigurationType>Application</ConfigurationType>
-    @id_toolset@
-    <CharacterSet>MultiByte</CharacterSet>
-  </PropertyGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
-  <PropertyGroup>
-    <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
-    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">.\</OutDir>
-    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">$(Configuration)\</IntDir>
-    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">false</LinkIncremental>
-  </PropertyGroup>
-  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">
-    <ClCompile>
-      <Optimization>Disabled</Optimization>
-      <PreprocessorDefinitions>%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <MinimalRebuild>false</MinimalRebuild>
-      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
-      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
-      <PrecompiledHeader>
-      </PrecompiledHeader>
-      <WarningLevel>TurnOffAllWarnings</WarningLevel>
-      <DebugInformationFormat>
-      </DebugInformationFormat>
-    </ClCompile>
-    <Link>
-      <GenerateDebugInformation>false</GenerateDebugInformation>
-      <SubSystem>Console</SubSystem>
-    </Link>
-    <PostBuildEvent>
-      <Command>for %%i in (@id_cl@) do %40echo CMAKE_@id_lang@_COMPILER=%%~$PATH:i</Command>
-    </PostBuildEvent>
-  </ItemDefinitionGroup>
-  <ItemGroup>
-    <ClCompile Include="@id_src@" />
-  </ItemGroup>
-  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
-</Project>
diff --git a/share/cmake-3.2/Modules/CompilerId/VS-6.dsp.in b/share/cmake-3.2/Modules/CompilerId/VS-6.dsp.in
deleted file mode 100644
index 48c9a23..0000000
--- a/share/cmake-3.2/Modules/CompilerId/VS-6.dsp.in
+++ /dev/null
@@ -1,48 +0,0 @@
-# Microsoft Developer Studio Project File - Name="CompilerId@id_lang@" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-
-# TARGTYPE "Win32 (x86) Application" 0x0101
-
-CFG=CompilerId@id_lang@ - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "CompilerId@id_lang@.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "CompilerId@id_lang@.mak" CFG="CompilerId@id_lang@ - Win32 Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "CompilerId@id_lang@ - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-CPP=cl.exe
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "."
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD CPP /nologo /MDd /c
-LINK32=link.exe
-# ADD LINK32 /nologo /version:0.0 /subsystem:console /machine:x86 /out:"CompilerId@id_lang@.exe" /IGNORE:4089
-# Begin Special Build Tool
-SOURCE="$(InputPath)"
-PostBuild_Cmds=for %%i in (@id_cl@) do @echo CMAKE_@id_lang@_COMPILER=%%~$PATH:i
-# End Special Build Tool
-# Begin Target
-
-# Name "CompilerId@id_lang@ - Win32 Debug"
-# Begin Group "Source Files"
-
-# Begin Source File
-
-SOURCE="@id_src@"
-# End Source File
-# End Group
-# End Target
-# End Project
diff --git a/share/cmake-3.2/Modules/CompilerId/Xcode-3.pbxproj.in b/share/cmake-3.2/Modules/CompilerId/Xcode-3.pbxproj.in
deleted file mode 100644
index 7f686a2..0000000
--- a/share/cmake-3.2/Modules/CompilerId/Xcode-3.pbxproj.in
+++ /dev/null
@@ -1,111 +0,0 @@
-// !$*UTF8*$!
-{
-	archiveVersion = 1;
-	classes = {
-	};
-	objectVersion = 45;
-	objects = {
-
-		2C18F0B615DC1E0300593670 = {isa = PBXBuildFile; fileRef = 2C18F0B415DC1DC700593670; };
-		2C18F0B415DC1DC700593670 = {isa = PBXFileReference; fileEncoding = 4; explicitFileType = @id_type@; path = @id_src@; sourceTree = "<group>"; };
-		08FB7794FE84155DC02AAC07 = {
-			isa = PBXGroup;
-			children = (
-				2C18F0B415DC1DC700593670,
-			);
-			name = CompilerId@id_lang@;
-			sourceTree = "<group>";
-		};
-		8DD76FA90486AB0100D96B5E = {
-			isa = PBXNativeTarget;
-			buildConfigurationList = 1DEB928508733DD80010E9CD;
-			buildPhases = (
-				2C18F0B515DC1DCE00593670,
-				2C8FEB8E15DC1A1A00E56A5D,
-			);
-			buildRules = (
-			);
-			dependencies = (
-			);
-			name = CompilerId@id_lang@;
-			productName = CompilerId@id_lang@;
-			productType = "@id_product_type@";
-		};
-		08FB7793FE84155DC02AAC07 = {
-			isa = PBXProject;
-			buildConfigurationList = 1DEB928908733DD80010E9CD;
-			compatibilityVersion = "Xcode 3.1";
-			developmentRegion = English;
-			hasScannedForEncodings = 1;
-			knownRegions = (
-				en,
-			);
-			mainGroup = 08FB7794FE84155DC02AAC07;
-			projectDirPath = "";
-			projectRoot = "";
-			targets = (
-				8DD76FA90486AB0100D96B5E,
-			);
-		};
-		2C8FEB8E15DC1A1A00E56A5D = {
-			isa = PBXShellScriptBuildPhase;
-			buildActionMask = 2147483647;
-			files = (
-			);
-			inputPaths = (
-			);
-			outputPaths = (
-			);
-			runOnlyForDeploymentPostprocessing = 0;
-			shellPath = /bin/sh;
-			shellScript = "echo \"GCC_VERSION=$GCC_VERSION\"";
-			showEnvVarsInLog = 0;
-		};
-		2C18F0B515DC1DCE00593670 = {
-			isa = PBXSourcesBuildPhase;
-			buildActionMask = 2147483647;
-			files = (
-				2C18F0B615DC1E0300593670,
-			);
-			runOnlyForDeploymentPostprocessing = 0;
-		};
-		1DEB928608733DD80010E9CD = {
-			isa = XCBuildConfiguration;
-			buildSettings = {
-				PRODUCT_NAME = CompilerId@id_lang@;
-			};
-			name = Debug;
-		};
-		1DEB928A08733DD80010E9CD = {
-			isa = XCBuildConfiguration;
-			buildSettings = {
-				ARCHS = "$(ARCHS_STANDARD_32_BIT)";
-				ONLY_ACTIVE_ARCH = YES;
-				CODE_SIGNING_REQUIRED = NO;
-				CONFIGURATION_BUILD_DIR = "$(BUILD_DIR)";
-				SYMROOT = .;
-				@id_toolset@
-				@id_deployment_target@
-				@id_sdkroot@
-			};
-			name = Debug;
-		};
-		1DEB928508733DD80010E9CD = {
-			isa = XCConfigurationList;
-			buildConfigurations = (
-				1DEB928608733DD80010E9CD,
-			);
-			defaultConfigurationIsVisible = 0;
-			defaultConfigurationName = Debug;
-		};
-		1DEB928908733DD80010E9CD = {
-			isa = XCConfigurationList;
-			buildConfigurations = (
-				1DEB928A08733DD80010E9CD,
-			);
-			defaultConfigurationIsVisible = 0;
-			defaultConfigurationName = Debug;
-		};
-	};
-	rootObject = 08FB7793FE84155DC02AAC07;
-}
diff --git a/share/cmake-3.2/Modules/DartConfiguration.tcl.in b/share/cmake-3.2/Modules/DartConfiguration.tcl.in
deleted file mode 100644
index 37a0a40..0000000
--- a/share/cmake-3.2/Modules/DartConfiguration.tcl.in
+++ /dev/null
@@ -1,106 +0,0 @@
-# This file is configured by CMake automatically as DartConfiguration.tcl
-# If you choose not to use CMake, this file may be hand configured, by
-# filling in the required variables.
-
-
-# Configuration directories and files
-SourceDirectory: @PROJECT_SOURCE_DIR@
-BuildDirectory: @PROJECT_BINARY_DIR@
-
-# Where to place the cost data store
-CostDataFile: @CTEST_COST_DATA_FILE@
-
-# Site is something like machine.domain, i.e. pragmatic.crd
-Site: @SITE@
-
-# Build name is osname-revision-compiler, i.e. Linux-2.4.2-2smp-c++
-BuildName: @BUILDNAME@
-
-# Submission information
-IsCDash: @CTEST_DROP_SITE_CDASH@
-CDashVersion: @CTEST_CDASH_VERSION@
-QueryCDashVersion: @CTEST_CDASH_QUERY_VERSION@
-DropSite: @DROP_SITE@
-DropLocation: @DROP_LOCATION@
-DropSiteUser: @DROP_SITE_USER@
-DropSitePassword: @DROP_SITE_PASSWORD@
-DropSiteMode: @DROP_SITE_MODE@
-DropMethod: @DROP_METHOD@
-TriggerSite: @TRIGGER_SITE@
-ScpCommand: @SCPCOMMAND@
-
-# Dashboard start time
-NightlyStartTime: @NIGHTLY_START_TIME@
-
-# Commands for the build/test/submit cycle
-ConfigureCommand: "@CMAKE_COMMAND@" "@PROJECT_SOURCE_DIR@"
-MakeCommand: @MAKECOMMAND@
-DefaultCTestConfigurationType: @DEFAULT_CTEST_CONFIGURATION_TYPE@
-
-# version control
-UpdateVersionOnly: @CTEST_UPDATE_VERSION_ONLY@
-
-# CVS options
-# Default is "-d -P -A"
-CVSCommand: @CVSCOMMAND@
-CVSUpdateOptions: @CVS_UPDATE_OPTIONS@
-
-# Subversion options
-SVNCommand: @SVNCOMMAND@
-SVNOptions: @CTEST_SVN_OPTIONS@
-SVNUpdateOptions: @SVN_UPDATE_OPTIONS@
-
-# Git options
-GITCommand: @GITCOMMAND@
-GITUpdateOptions: @GIT_UPDATE_OPTIONS@
-GITUpdateCustom: @CTEST_GIT_UPDATE_CUSTOM@
-
-# Perforce options
-P4Command: @P4COMMAND@
-P4Client: @CTEST_P4_CLIENT@
-P4Options: @CTEST_P4_OPTIONS@
-P4UpdateOptions: @CTEST_P4_UPDATE_OPTIONS@
-P4UpdateCustom: @CTEST_P4_UPDATE_CUSTOM@
-
-# Generic update command
-UpdateCommand: @UPDATE_COMMAND@
-UpdateOptions: @UPDATE_OPTIONS@
-UpdateType: @UPDATE_TYPE@
-
-# Compiler info
-Compiler: @CMAKE_CXX_COMPILER@
-
-# Dynamic analysis (MemCheck)
-PurifyCommand: @PURIFYCOMMAND@
-ValgrindCommand: @VALGRIND_COMMAND@
-ValgrindCommandOptions: @VALGRIND_COMMAND_OPTIONS@
-MemoryCheckType: @MEMORYCHECK_TYPE@
-MemoryCheckSanitizerOptions: @MEMORYCHECK_SANITIZER_OPTIONS@
-MemoryCheckCommand: @MEMORYCHECK_COMMAND@
-MemoryCheckCommandOptions: @MEMORYCHECK_COMMAND_OPTIONS@
-MemoryCheckSuppressionFile: @MEMORYCHECK_SUPPRESSIONS_FILE@
-
-# Coverage
-CoverageCommand: @COVERAGE_COMMAND@
-CoverageExtraFlags: @COVERAGE_EXTRA_FLAGS@
-
-# Cluster commands
-SlurmBatchCommand: @SLURM_SBATCH_COMMAND@
-SlurmRunCommand: @SLURM_SRUN_COMMAND@
-
-# Testing options
-# TimeOut is the amount of time in seconds to wait for processes
-# to complete during testing.  After TimeOut seconds, the
-# process will be summarily terminated.
-# Currently set to 25 minutes
-TimeOut: @DART_TESTING_TIMEOUT@
-
-UseLaunchers: @CTEST_USE_LAUNCHERS@
-CurlOptions: @CTEST_CURL_OPTIONS@
-# warning, if you add new options here that have to do with submit,
-# you have to update cmCTestSubmitCommand.cxx
-
-# For CTest submissions that timeout, these options
-# specify behavior for retrying the submission
-CTestSubmitRetryDelay: @CTEST_SUBMIT_RETRY_DELAY@
-CTestSubmitRetryCount: @CTEST_SUBMIT_RETRY_COUNT@
diff --git a/share/cmake-3.2/Modules/DeployQt4.cmake b/share/cmake-3.2/Modules/DeployQt4.cmake
deleted file mode 100644
index b1a2370..0000000
--- a/share/cmake-3.2/Modules/DeployQt4.cmake
+++ /dev/null
@@ -1,336 +0,0 @@
-#.rst:
-# DeployQt4
-# ---------
-#
-# Functions to help assemble a standalone Qt4 executable.
-#
-# A collection of CMake utility functions useful for deploying Qt4
-# executables.
-#
-# The following functions are provided by this module:
-#
-# ::
-#
-#    write_qt4_conf
-#    resolve_qt4_paths
-#    fixup_qt4_executable
-#    install_qt4_plugin_path
-#    install_qt4_plugin
-#    install_qt4_executable
-#
-# Requires CMake 2.6 or greater because it uses function and
-# PARENT_SCOPE.  Also depends on BundleUtilities.cmake.
-#
-# ::
-#
-#   WRITE_QT4_CONF(<qt_conf_dir> <qt_conf_contents>)
-#
-# Writes a qt.conf file with the <qt_conf_contents> into <qt_conf_dir>.
-#
-# ::
-#
-#   RESOLVE_QT4_PATHS(<paths_var> [<executable_path>])
-#
-# Loop through <paths_var> list and if any don't exist resolve them
-# relative to the <executable_path> (if supplied) or the
-# CMAKE_INSTALL_PREFIX.
-#
-# ::
-#
-#   FIXUP_QT4_EXECUTABLE(<executable>
-#     [<qtplugins> <libs> <dirs> <plugins_dir> <request_qt_conf>])
-#
-# Copies Qt plugins, writes a Qt configuration file (if needed) and
-# fixes up a Qt4 executable using BundleUtilities so it is standalone
-# and can be drag-and-drop copied to another machine as long as all of
-# the system libraries are compatible.
-#
-# <executable> should point to the executable to be fixed-up.
-#
-# <qtplugins> should contain a list of the names or paths of any Qt
-# plugins to be installed.
-#
-# <libs> will be passed to BundleUtilities and should be a list of any
-# already installed plugins, libraries or executables to also be
-# fixed-up.
-#
-# <dirs> will be passed to BundleUtilities and should contain and
-# directories to be searched to find library dependencies.
-#
-# <plugins_dir> allows an custom plugins directory to be used.
-#
-# <request_qt_conf> will force a qt.conf file to be written even if not
-# needed.
-#
-# ::
-#
-#   INSTALL_QT4_PLUGIN_PATH(plugin executable copy installed_plugin_path_var
-#                           <plugins_dir> <component> <configurations>)
-#
-# Install (or copy) a resolved <plugin> to the default plugins directory
-# (or <plugins_dir>) relative to <executable> and store the result in
-# <installed_plugin_path_var>.
-#
-# If <copy> is set to TRUE then the plugins will be copied rather than
-# installed.  This is to allow this module to be used at CMake time
-# rather than install time.
-#
-# If <component> is set then anything installed will use this COMPONENT.
-#
-# ::
-#
-#   INSTALL_QT4_PLUGIN(plugin executable copy installed_plugin_path_var
-#                      <plugins_dir> <component>)
-#
-# Install (or copy) an unresolved <plugin> to the default plugins
-# directory (or <plugins_dir>) relative to <executable> and store the
-# result in <installed_plugin_path_var>.  See documentation of
-# INSTALL_QT4_PLUGIN_PATH.
-#
-# ::
-#
-#   INSTALL_QT4_EXECUTABLE(<executable>
-#     [<qtplugins> <libs> <dirs> <plugins_dir> <request_qt_conf> <component>])
-#
-# Installs Qt plugins, writes a Qt configuration file (if needed) and
-# fixes up a Qt4 executable using BundleUtilities so it is standalone
-# and can be drag-and-drop copied to another machine as long as all of
-# the system libraries are compatible.  The executable will be fixed-up
-# at install time.  <component> is the COMPONENT used for bundle fixup
-# and plugin installation.  See documentation of FIXUP_QT4_BUNDLE.
-
-#=============================================================================
-# Copyright 2011 Mike McQuaid <mike@mikemcquaid.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# The functions defined in this file depend on the fixup_bundle function
-# (and others) found in BundleUtilities.cmake
-
-include("${CMAKE_CURRENT_LIST_DIR}/BundleUtilities.cmake")
-set(DeployQt4_cmake_dir "${CMAKE_CURRENT_LIST_DIR}")
-set(DeployQt4_apple_plugins_dir "PlugIns")
-
-function(write_qt4_conf qt_conf_dir qt_conf_contents)
-        set(qt_conf_path "${qt_conf_dir}/qt.conf")
-        message(STATUS "Writing ${qt_conf_path}")
-        file(WRITE "${qt_conf_path}" "${qt_conf_contents}")
-endfunction()
-
-function(resolve_qt4_paths paths_var)
-        set(executable_path ${ARGV1})
-
-        set(paths_resolved)
-        foreach(path ${${paths_var}})
-                if(EXISTS "${path}")
-                        list(APPEND paths_resolved "${path}")
-                else()
-                        if(${executable_path})
-                                list(APPEND paths_resolved "${executable_path}/${path}")
-                        else()
-                                list(APPEND paths_resolved "\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${path}")
-                        endif()
-                endif()
-        endforeach()
-        set(${paths_var} ${paths_resolved} PARENT_SCOPE)
-endfunction()
-
-function(fixup_qt4_executable executable)
-        set(qtplugins ${ARGV1})
-        set(libs ${ARGV2})
-        set(dirs ${ARGV3})
-        set(plugins_dir ${ARGV4})
-        set(request_qt_conf ${ARGV5})
-
-        message(STATUS "fixup_qt4_executable")
-        message(STATUS "  executable='${executable}'")
-        message(STATUS "  qtplugins='${qtplugins}'")
-        message(STATUS "  libs='${libs}'")
-        message(STATUS "  dirs='${dirs}'")
-        message(STATUS "  plugins_dir='${plugins_dir}'")
-        message(STATUS "  request_qt_conf='${request_qt_conf}'")
-
-        if(QT_LIBRARY_DIR)
-                list(APPEND dirs "${QT_LIBRARY_DIR}")
-        endif()
-        if(QT_BINARY_DIR)
-                list(APPEND dirs "${QT_BINARY_DIR}")
-        endif()
-
-        if(APPLE)
-                set(qt_conf_dir "${executable}/Contents/Resources")
-                set(executable_path "${executable}")
-                set(write_qt_conf TRUE)
-                if(NOT plugins_dir)
-                        set(plugins_dir "${DeployQt4_apple_plugins_dir}")
-                endif()
-        else()
-                get_filename_component(executable_path "${executable}" PATH)
-                if(NOT executable_path)
-                        set(executable_path ".")
-                endif()
-                set(qt_conf_dir "${executable_path}")
-                set(write_qt_conf ${request_qt_conf})
-        endif()
-
-        foreach(plugin ${qtplugins})
-                set(installed_plugin_path "")
-                install_qt4_plugin("${plugin}" "${executable}" 1 installed_plugin_path)
-                list(APPEND libs ${installed_plugin_path})
-        endforeach()
-
-        foreach(lib ${libs})
-                if(NOT EXISTS "${lib}")
-                        message(FATAL_ERROR "Library does not exist: ${lib}")
-                endif()
-        endforeach()
-
-        resolve_qt4_paths(libs "${executable_path}")
-
-        if(write_qt_conf)
-                set(qt_conf_contents "[Paths]\nPlugins = ${plugins_dir}")
-                write_qt4_conf("${qt_conf_dir}" "${qt_conf_contents}")
-        endif()
-
-        fixup_bundle("${executable}" "${libs}" "${dirs}")
-endfunction()
-
-function(install_qt4_plugin_path plugin executable copy installed_plugin_path_var)
-        set(plugins_dir ${ARGV4})
-        set(component ${ARGV5})
-        set(configurations ${ARGV6})
-        if(EXISTS "${plugin}")
-                if(APPLE)
-                        if(NOT plugins_dir)
-                                set(plugins_dir "${DeployQt4_apple_plugins_dir}")
-                        endif()
-                        set(plugins_path "${executable}/Contents/${plugins_dir}")
-                else()
-                        get_filename_component(plugins_path "${executable}" PATH)
-                        if(NOT plugins_path)
-                                set(plugins_path ".")
-                        endif()
-                        if(plugins_dir)
-                                set(plugins_path "${plugins_path}/${plugins_dir}")
-                        endif()
-                endif()
-
-                set(plugin_group "")
-
-                get_filename_component(plugin_path "${plugin}" PATH)
-                get_filename_component(plugin_parent_path "${plugin_path}" PATH)
-                get_filename_component(plugin_parent_dir_name "${plugin_parent_path}" NAME)
-                get_filename_component(plugin_name "${plugin}" NAME)
-                string(TOLOWER "${plugin_parent_dir_name}" plugin_parent_dir_name)
-
-                if("${plugin_parent_dir_name}" STREQUAL "plugins")
-                        get_filename_component(plugin_group "${plugin_path}" NAME)
-                        set(${plugin_group_var} "${plugin_group}")
-                endif()
-                set(plugins_path "${plugins_path}/${plugin_group}")
-
-                if(${copy})
-                        file(MAKE_DIRECTORY "${plugins_path}")
-                        file(COPY "${plugin}" DESTINATION "${plugins_path}")
-                else()
-                        if(configurations AND (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE))
-                                set(configurations CONFIGURATIONS ${configurations})
-                        else()
-                                unset(configurations)
-                        endif()
-                        install(FILES "${plugin}" DESTINATION "${plugins_path}" ${configurations} ${component})
-                endif()
-                set(${installed_plugin_path_var} "${plugins_path}/${plugin_name}" PARENT_SCOPE)
-        endif()
-endfunction()
-
-function(install_qt4_plugin plugin executable copy installed_plugin_path_var)
-        set(plugins_dir ${ARGV4})
-        set(component ${ARGV5})
-        if(EXISTS "${plugin}")
-                install_qt4_plugin_path("${plugin}" "${executable}" "${copy}" "${installed_plugin_path_var}" "${plugins_dir}" "${component}")
-        else()
-                string(TOUPPER "QT_${plugin}_PLUGIN" plugin_var)
-                set(plugin_release_var "${plugin_var}_RELEASE")
-                set(plugin_debug_var "${plugin_var}_DEBUG")
-                set(plugin_release "${${plugin_release_var}}")
-                set(plugin_debug "${${plugin_debug_var}}")
-                if(DEFINED "${plugin_release_var}" AND DEFINED "${plugin_debug_var}" AND NOT EXISTS "${plugin_release}" AND NOT EXISTS "${plugin_debug}")
-                        message(WARNING "Qt plugin \"${plugin}\" not recognized or found.")
-                endif()
-                if(NOT EXISTS "${${plugin_debug_var}}")
-                        set(plugin_debug "${plugin_release}")
-                endif()
-
-                if(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
-                        install_qt4_plugin_path("${plugin_release}" "${executable}" "${copy}" "${installed_plugin_path_var}_release" "${plugins_dir}" "${component}" "Release|RelWithDebInfo|MinSizeRel")
-                        install_qt4_plugin_path("${plugin_debug}" "${executable}" "${copy}" "${installed_plugin_path_var}_debug" "${plugins_dir}" "${component}" "Debug")
-
-                        if(CMAKE_BUILD_TYPE MATCHES "^Debug$")
-                                set(${installed_plugin_path_var} ${${installed_plugin_path_var}_debug})
-                        else()
-                                set(${installed_plugin_path_var} ${${installed_plugin_path_var}_release})
-                        endif()
-                else()
-                        install_qt4_plugin_path("${plugin_release}" "${executable}" "${copy}" "${installed_plugin_path_var}" "${plugins_dir}" "${component}")
-                endif()
-        endif()
-        set(${installed_plugin_path_var} ${${installed_plugin_path_var}} PARENT_SCOPE)
-endfunction()
-
-function(install_qt4_executable executable)
-        set(qtplugins ${ARGV1})
-        set(libs ${ARGV2})
-        set(dirs ${ARGV3})
-        set(plugins_dir ${ARGV4})
-        set(request_qt_conf ${ARGV5})
-        set(component ${ARGV6})
-        if(QT_LIBRARY_DIR)
-                list(APPEND dirs "${QT_LIBRARY_DIR}")
-        endif()
-        if(QT_BINARY_DIR)
-                list(APPEND dirs "${QT_BINARY_DIR}")
-        endif()
-        if(component)
-                set(component COMPONENT ${component})
-        else()
-                unset(component)
-        endif()
-
-        get_filename_component(executable_absolute "${executable}" ABSOLUTE)
-        if(EXISTS "${QT_QTCORE_LIBRARY_RELEASE}")
-            gp_file_type("${executable_absolute}" "${QT_QTCORE_LIBRARY_RELEASE}" qtcore_type)
-        elseif(EXISTS "${QT_QTCORE_LIBRARY_DEBUG}")
-            gp_file_type("${executable_absolute}" "${QT_QTCORE_LIBRARY_DEBUG}" qtcore_type)
-        endif()
-        if(qtcore_type STREQUAL "system")
-                set(qt_plugins_dir "")
-        endif()
-
-        if(QT_IS_STATIC)
-                message(WARNING "Qt built statically: not installing plugins.")
-        else()
-                foreach(plugin ${qtplugins})
-                        set(installed_plugin_paths "")
-                        install_qt4_plugin("${plugin}" "${executable}" 0 installed_plugin_paths "${plugins_dir}" "${component}")
-                        list(APPEND libs ${installed_plugin_paths})
-                endforeach()
-        endif()
-
-        resolve_qt4_paths(libs "")
-
-        install(CODE
-  "include(\"${DeployQt4_cmake_dir}/DeployQt4.cmake\")
-  set(BU_CHMOD_BUNDLE_ITEMS TRUE)
-  FIXUP_QT4_EXECUTABLE(\"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${executable}\" \"\" \"${libs}\" \"${dirs}\" \"${plugins_dir}\" \"${request_qt_conf}\")"
-                ${component}
-        )
-endfunction()
diff --git a/share/cmake-3.2/Modules/ExternalData.cmake b/share/cmake-3.2/Modules/ExternalData.cmake
deleted file mode 100644
index 741db81..0000000
--- a/share/cmake-3.2/Modules/ExternalData.cmake
+++ /dev/null
@@ -1,999 +0,0 @@
-#[=======================================================================[.rst:
-ExternalData
-------------
-
-.. only:: html
-
-   .. contents::
-
-Manage data files stored outside source tree
-
-Introduction
-^^^^^^^^^^^^
-
-Use this module to unambiguously reference data files stored outside
-the source tree and fetch them at build time from arbitrary local and
-remote content-addressed locations.  Functions provided by this module
-recognize arguments with the syntax ``DATA{<name>}`` as references to
-external data, replace them with full paths to local copies of those
-data, and create build rules to fetch and update the local copies.
-
-For example:
-
-.. code-block:: cmake
-
- include(ExternalData)
- set(ExternalData_URL_TEMPLATES "file:///local/%(algo)/%(hash)"
-                                "file:////host/share/%(algo)/%(hash)"
-                                "http://data.org/%(algo)/%(hash)")
- ExternalData_Add_Test(MyData
-   NAME MyTest
-   COMMAND MyExe DATA{MyInput.png}
-   )
- ExternalData_Add_Target(MyData)
-
-When test ``MyTest`` runs the ``DATA{MyInput.png}`` argument will be
-replaced by the full path to a real instance of the data file
-``MyInput.png`` on disk.  If the source tree contains a content link
-such as ``MyInput.png.md5`` then the ``MyData`` target creates a real
-``MyInput.png`` in the build tree.
-
-Module Functions
-^^^^^^^^^^^^^^^^
-
-.. command:: ExternalData_Expand_Arguments
-
-  The ``ExternalData_Expand_Arguments`` function evaluates ``DATA{}``
-  references in its arguments and constructs a new list of arguments::
-
-    ExternalData_Expand_Arguments(
-      <target>   # Name of data management target
-      <outVar>   # Output variable
-      [args...]  # Input arguments, DATA{} allowed
-      )
-
-  It replaces each ``DATA{}`` reference in an argument with the full path of
-  a real data file on disk that will exist after the ``<target>`` builds.
-
-.. command:: ExternalData_Add_Test
-
-  The ``ExternalData_Add_Test`` function wraps around the CMake
-  :command:`add_test` command but supports ``DATA{}`` references in
-  its arguments::
-
-    ExternalData_Add_Test(
-      <target>   # Name of data management target
-      ...        # Arguments of add_test(), DATA{} allowed
-      )
-
-  It passes its arguments through ``ExternalData_Expand_Arguments`` and then
-  invokes the :command:`add_test` command using the results.
-
-.. command:: ExternalData_Add_Target
-
-  The ``ExternalData_Add_Target`` function creates a custom target to
-  manage local instances of data files stored externally::
-
-    ExternalData_Add_Target(
-      <target>   # Name of data management target
-      )
-
-  It creates custom commands in the target as necessary to make data
-  files available for each ``DATA{}`` reference previously evaluated by
-  other functions provided by this module.
-  Data files may be fetched from one of the URL templates specified in
-  the ``ExternalData_URL_TEMPLATES`` variable, or may be found locally
-  in one of the paths specified in the ``ExternalData_OBJECT_STORES``
-  variable.
-
-Module Variables
-^^^^^^^^^^^^^^^^
-
-The following variables configure behavior.  They should be set before
-calling any of the functions provided by this module.
-
-.. variable:: ExternalData_BINARY_ROOT
-
-  The ``ExternalData_BINARY_ROOT`` variable may be set to the directory to
-  hold the real data files named by expanded ``DATA{}`` references.  The
-  default is ``CMAKE_BINARY_DIR``.  The directory layout will mirror that of
-  content links under ``ExternalData_SOURCE_ROOT``.
-
-.. variable:: ExternalData_CUSTOM_SCRIPT_<key>
-
-  Specify a full path to a ``.cmake`` custom fetch script identified by
-  ``<key>`` in entries of the ``ExternalData_URL_TEMPLATES`` list.
-  See `Custom Fetch Scripts`_.
-
-.. variable:: ExternalData_LINK_CONTENT
-
-  The ``ExternalData_LINK_CONTENT`` variable may be set to the name of a
-  supported hash algorithm to enable automatic conversion of real data
-  files referenced by the ``DATA{}`` syntax into content links.  For each
-  such ``<file>`` a content link named ``<file><ext>`` is created.  The
-  original file is renamed to the form ``.ExternalData_<algo>_<hash>`` to
-  stage it for future transmission to one of the locations in the list
-  of URL templates (by means outside the scope of this module).  The
-  data fetch rule created for the content link will use the staged
-  object if it cannot be found using any URL template.
-
-.. variable:: ExternalData_OBJECT_STORES
-
-  The ``ExternalData_OBJECT_STORES`` variable may be set to a list of local
-  directories that store objects using the layout ``<dir>/%(algo)/%(hash)``.
-  These directories will be searched first for a needed object.  If the
-  object is not available in any store then it will be fetched remotely
-  using the URL templates and added to the first local store listed.  If
-  no stores are specified the default is a location inside the build
-  tree.
-
-.. variable:: ExternalData_SERIES_PARSE
-              ExternalData_SERIES_PARSE_PREFIX
-              ExternalData_SERIES_PARSE_NUMBER
-              ExternalData_SERIES_PARSE_SUFFIX
-              ExternalData_SERIES_MATCH
-
-  See `Referencing File Series`_.
-
-.. variable:: ExternalData_SOURCE_ROOT
-
-  The ``ExternalData_SOURCE_ROOT`` variable may be set to the highest source
-  directory containing any path named by a ``DATA{}`` reference.  The
-  default is ``CMAKE_SOURCE_DIR``.  ``ExternalData_SOURCE_ROOT`` and
-  ``CMAKE_SOURCE_DIR`` must refer to directories within a single source
-  distribution (e.g.  they come together in one tarball).
-
-.. variable:: ExternalData_TIMEOUT_ABSOLUTE
-
-  The ``ExternalData_TIMEOUT_ABSOLUTE`` variable sets the download
-  absolute timeout, in seconds, with a default of ``300`` seconds.
-  Set to ``0`` to disable enforcement.
-
-.. variable:: ExternalData_TIMEOUT_INACTIVITY
-
-  The ``ExternalData_TIMEOUT_INACTIVITY`` variable sets the download
-  inactivity timeout, in seconds, with a default of ``60`` seconds.
-  Set to ``0`` to disable enforcement.
-
-.. variable:: ExternalData_URL_TEMPLATES
-
-  The ``ExternalData_URL_TEMPLATES`` may be set to provide a list of
-  of URL templates using the placeholders ``%(algo)`` and ``%(hash)``
-  in each template.  Data fetch rules try each URL template in order
-  by substituting the hash algorithm name for ``%(algo)`` and the hash
-  value for ``%(hash)``.
-
-Referencing Files
-^^^^^^^^^^^^^^^^^
-
-Referencing Single Files
-""""""""""""""""""""""""
-
-The ``DATA{}`` syntax is literal and the ``<name>`` is a full or relative path
-within the source tree.  The source tree must contain either a real
-data file at ``<name>`` or a "content link" at ``<name><ext>`` containing a
-hash of the real file using a hash algorithm corresponding to ``<ext>``.
-For example, the argument ``DATA{img.png}`` may be satisfied by either a
-real ``img.png`` file in the current source directory or a ``img.png.md5``
-file containing its MD5 sum.
-
-Referencing File Series
-"""""""""""""""""""""""
-
-The ``DATA{}`` syntax can be told to fetch a file series using the form
-``DATA{<name>,:}``, where the ``:`` is literal.  If the source tree
-contains a group of files or content links named like a series then a
-reference to one member adds rules to fetch all of them.  Although all
-members of a series are fetched, only the file originally named by the
-``DATA{}`` argument is substituted for it.  The default configuration
-recognizes file series names ending with ``#.ext``, ``_#.ext``, ``.#.ext``,
-or ``-#.ext`` where ``#`` is a sequence of decimal digits and ``.ext`` is
-any single extension.  Configure it with a regex that parses ``<number>``
-and ``<suffix>`` parts from the end of ``<name>``::
-
- ExternalData_SERIES_PARSE = regex of the form (<number>)(<suffix>)$
-
-For more complicated cases set::
-
- ExternalData_SERIES_PARSE = regex with at least two () groups
- ExternalData_SERIES_PARSE_PREFIX = <prefix> regex group number, if any
- ExternalData_SERIES_PARSE_NUMBER = <number> regex group number
- ExternalData_SERIES_PARSE_SUFFIX = <suffix> regex group number
-
-Configure series number matching with a regex that matches the
-``<number>`` part of series members named ``<prefix><number><suffix>``::
-
- ExternalData_SERIES_MATCH = regex matching <number> in all series members
-
-Note that the ``<suffix>`` of a series does not include a hash-algorithm
-extension.
-
-Referencing Associated Files
-""""""""""""""""""""""""""""
-
-The ``DATA{}`` syntax can alternatively match files associated with the
-named file and contained in the same directory.  Associated files may
-be specified by options using the syntax
-``DATA{<name>,<opt1>,<opt2>,...}``.  Each option may specify one file by
-name or specify a regular expression to match file names using the
-syntax ``REGEX:<regex>``.  For example, the arguments::
-
- DATA{MyData/MyInput.mhd,MyInput.img}                   # File pair
- DATA{MyData/MyFrames00.png,REGEX:MyFrames[0-9]+\\.png} # Series
-
-will pass ``MyInput.mha`` and ``MyFrames00.png`` on the command line but
-ensure that the associated files are present next to them.
-
-Referencing Directories
-"""""""""""""""""""""""
-
-The ``DATA{}`` syntax may reference a directory using a trailing slash and
-a list of associated files.  The form ``DATA{<name>/,<opt1>,<opt2>,...}``
-adds rules to fetch any files in the directory that match one of the
-associated file options.  For example, the argument
-``DATA{MyDataDir/,REGEX:.*}`` will pass the full path to a ``MyDataDir``
-directory on the command line and ensure that the directory contains
-files corresponding to every file or content link in the ``MyDataDir``
-source directory.
-
-Hash Algorithms
-^^^^^^^^^^^^^^^
-
-The following hash algorithms are supported::
-
- %(algo)     <ext>     Description
- -------     -----     -----------
- MD5         .md5      Message-Digest Algorithm 5, RFC 1321
- SHA1        .sha1     US Secure Hash Algorithm 1, RFC 3174
- SHA224      .sha224   US Secure Hash Algorithms, RFC 4634
- SHA256      .sha256   US Secure Hash Algorithms, RFC 4634
- SHA384      .sha384   US Secure Hash Algorithms, RFC 4634
- SHA512      .sha512   US Secure Hash Algorithms, RFC 4634
-
-Note that the hashes are used only for unique data identification and
-download verification.
-
-.. _`ExternalData Custom Fetch Scripts`:
-
-Custom Fetch Scripts
-^^^^^^^^^^^^^^^^^^^^
-
-When a data file must be fetched from one of the URL templates
-specified in the ``ExternalData_URL_TEMPLATES`` variable, it is
-normally downloaded using the :command:`file(DOWNLOAD)` command.
-One may specify usage of a custom fetch script by using a URL
-template of the form ``ExternalDataCustomScript://<key>/<loc>``.
-The ``<key>`` must be a C identifier, and the ``<loc>`` must
-contain the ``%(algo)`` and ``%(hash)`` placeholders.
-A variable corresponding to the key, ``ExternalData_CUSTOM_SCRIPT_<key>``,
-must be set to the full path to a ``.cmake`` script file.  The script
-will be included to perform the actual fetch, and provided with
-the following variables:
-
-.. variable:: ExternalData_CUSTOM_LOCATION
-
-  When a custom fetch script is loaded, this variable is set to the
-  location part of the URL, which will contain the substituted hash
-  algorithm name and content hash value.
-
-.. variable:: ExternalData_CUSTOM_FILE
-
-  When a custom fetch script is loaded, this variable is set to the
-  full path to a file in which the script must store the fetched
-  content.  The name of the file is unspecified and should not be
-  interpreted in any way.
-
-The custom fetch script is expected to store fetched content in the
-file or set a variable:
-
-.. variable:: ExternalData_CUSTOM_ERROR
-
-  When a custom fetch script fails to fetch the requested content,
-  it must set this variable to a short one-line message describing
-  the reason for failure.
-
-#]=======================================================================]
-
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-function(ExternalData_add_test target)
-  # Expand all arguments as a single string to preserve escaped semicolons.
-  ExternalData_expand_arguments("${target}" testArgs "${ARGN}")
-  add_test(${testArgs})
-endfunction()
-
-function(ExternalData_add_target target)
-  if(NOT ExternalData_URL_TEMPLATES AND NOT ExternalData_OBJECT_STORES)
-    message(FATAL_ERROR
-      "Neither ExternalData_URL_TEMPLATES nor ExternalData_OBJECT_STORES is set!")
-  endif()
-  if(NOT ExternalData_OBJECT_STORES)
-    set(ExternalData_OBJECT_STORES ${CMAKE_BINARY_DIR}/ExternalData/Objects)
-  endif()
-  set(_ExternalData_CONFIG_CODE "")
-
-  # Store custom script configuration.
-  foreach(url_template IN LISTS ExternalData_URL_TEMPLATES)
-    if("${url_template}" MATCHES "^ExternalDataCustomScript://([^/]*)/(.*)$")
-      set(key "${CMAKE_MATCH_1}")
-      if(key MATCHES "^[A-Za-z_][A-Za-z0-9_]*$")
-        if(ExternalData_CUSTOM_SCRIPT_${key})
-          if(IS_ABSOLUTE "${ExternalData_CUSTOM_SCRIPT_${key}}")
-            string(CONCAT _ExternalData_CONFIG_CODE "${_ExternalData_CONFIG_CODE}\n"
-              "set(ExternalData_CUSTOM_SCRIPT_${key} \"${ExternalData_CUSTOM_SCRIPT_${key}}\")")
-          else()
-            message(FATAL_ERROR
-              "No ExternalData_CUSTOM_SCRIPT_${key} is not set to a full path:\n"
-              " ${ExternalData_CUSTOM_SCRIPT_${key}}")
-          endif()
-        else()
-          message(FATAL_ERROR
-            "No ExternalData_CUSTOM_SCRIPT_${key} is set for URL template:\n"
-            " ${url_template}")
-        endif()
-      else()
-        message(FATAL_ERROR
-          "Bad ExternalDataCustomScript key '${key}' in URL template:\n"
-          " ${url_template}\n"
-          "The key must be a valid C identifier.")
-      endif()
-    endif()
-  endforeach()
-
-  # Store configuration for use by build-time script.
-  set(config ${CMAKE_CURRENT_BINARY_DIR}/${target}_config.cmake)
-  configure_file(${_ExternalData_SELF_DIR}/ExternalData_config.cmake.in ${config} @ONLY)
-
-  set(files "")
-
-  # Set "_ExternalData_FILE_${file}" for each output file to avoid duplicate
-  # rules.  Use local data first to prefer real files over content links.
-
-  # Custom commands to copy or link local data.
-  get_property(data_local GLOBAL PROPERTY _ExternalData_${target}_LOCAL)
-  foreach(entry IN LISTS data_local)
-    string(REPLACE "|" ";" tuple "${entry}")
-    list(GET tuple 0 file)
-    list(GET tuple 1 name)
-    if(NOT DEFINED "_ExternalData_FILE_${file}")
-      set("_ExternalData_FILE_${file}" 1)
-      add_custom_command(
-        COMMENT "Generating ${file}"
-        OUTPUT "${file}"
-        COMMAND ${CMAKE_COMMAND} -Drelative_top=${CMAKE_BINARY_DIR}
-                                 -Dfile=${file} -Dname=${name}
-                                 -DExternalData_ACTION=local
-                                 -DExternalData_CONFIG=${config}
-                                 -P ${_ExternalData_SELF}
-        MAIN_DEPENDENCY "${name}"
-        )
-      list(APPEND files "${file}")
-    endif()
-  endforeach()
-
-  # Custom commands to fetch remote data.
-  get_property(data_fetch GLOBAL PROPERTY _ExternalData_${target}_FETCH)
-  foreach(entry IN LISTS data_fetch)
-    string(REPLACE "|" ";" tuple "${entry}")
-    list(GET tuple 0 file)
-    list(GET tuple 1 name)
-    list(GET tuple 2 ext)
-    set(stamp "${ext}-stamp")
-    if(NOT DEFINED "_ExternalData_FILE_${file}")
-      set("_ExternalData_FILE_${file}" 1)
-      add_custom_command(
-        # Users care about the data file, so hide the hash/timestamp file.
-        COMMENT "Generating ${file}"
-        # The hash/timestamp file is the output from the build perspective.
-        # List the real file as a second output in case it is a broken link.
-        # The files must be listed in this order so CMake can hide from the
-        # make tool that a symlink target may not be newer than the input.
-        OUTPUT "${file}${stamp}" "${file}"
-        # Run the data fetch/update script.
-        COMMAND ${CMAKE_COMMAND} -Drelative_top=${CMAKE_BINARY_DIR}
-                                 -Dfile=${file} -Dname=${name} -Dext=${ext}
-                                 -DExternalData_ACTION=fetch
-                                 -DExternalData_CONFIG=${config}
-                                 -P ${_ExternalData_SELF}
-        # Update whenever the object hash changes.
-        MAIN_DEPENDENCY "${name}${ext}"
-        )
-      list(APPEND files "${file}${stamp}")
-    endif()
-  endforeach()
-
-  # Custom target to drive all update commands.
-  add_custom_target(${target} ALL DEPENDS ${files})
-endfunction()
-
-function(ExternalData_expand_arguments target outArgsVar)
-  # Replace DATA{} references with real arguments.
-  set(data_regex "DATA{([^;{}\r\n]*)}")
-  set(other_regex "([^D]|D[^A]|DA[^T]|DAT[^A]|DATA[^{])+|.")
-  set(outArgs "")
-  # This list expansion un-escapes semicolons in list element values so we
-  # must re-escape them below anywhere a new list expansion will occur.
-  foreach(arg IN LISTS ARGN)
-    if("x${arg}" MATCHES "${data_regex}")
-      # Re-escape in-value semicolons before expansion in foreach below.
-      string(REPLACE ";" "\\;" tmp "${arg}")
-      # Split argument into DATA{}-pieces and other pieces.
-      string(REGEX MATCHALL "${data_regex}|${other_regex}" pieces "${tmp}")
-      # Compose output argument with DATA{}-pieces replaced.
-      set(outArg "")
-      foreach(piece IN LISTS pieces)
-        if("x${piece}" MATCHES "^x${data_regex}$")
-          # Replace this DATA{}-piece with a file path.
-          _ExternalData_arg("${target}" "${piece}" "${CMAKE_MATCH_1}" file)
-          set(outArg "${outArg}${file}")
-        else()
-          # No replacement needed for this piece.
-          set(outArg "${outArg}${piece}")
-        endif()
-      endforeach()
-    else()
-      # No replacements needed in this argument.
-      set(outArg "${arg}")
-    endif()
-    # Re-escape in-value semicolons in resulting list.
-    string(REPLACE ";" "\\;" outArg "${outArg}")
-    list(APPEND outArgs "${outArg}")
-  endforeach()
-  set("${outArgsVar}" "${outArgs}" PARENT_SCOPE)
-endfunction()
-
-#-----------------------------------------------------------------------------
-# Private helper interface
-
-set(_ExternalData_REGEX_ALGO "MD5|SHA1|SHA224|SHA256|SHA384|SHA512")
-set(_ExternalData_REGEX_EXT "md5|sha1|sha224|sha256|sha384|sha512")
-set(_ExternalData_SELF "${CMAKE_CURRENT_LIST_FILE}")
-get_filename_component(_ExternalData_SELF_DIR "${_ExternalData_SELF}" PATH)
-
-function(_ExternalData_compute_hash var_hash algo file)
-  if("${algo}" MATCHES "^${_ExternalData_REGEX_ALGO}$")
-    file("${algo}" "${file}" hash)
-    set("${var_hash}" "${hash}" PARENT_SCOPE)
-  else()
-    message(FATAL_ERROR "Hash algorithm ${algo} unimplemented.")
-  endif()
-endfunction()
-
-function(_ExternalData_random var)
-  string(RANDOM LENGTH 6 random)
-  set("${var}" "${random}" PARENT_SCOPE)
-endfunction()
-
-function(_ExternalData_exact_regex regex_var string)
-  string(REGEX REPLACE "([][+.*()^])" "\\\\\\1" regex "${string}")
-  set("${regex_var}" "${regex}" PARENT_SCOPE)
-endfunction()
-
-function(_ExternalData_atomic_write file content)
-  _ExternalData_random(random)
-  set(tmp "${file}.tmp${random}")
-  file(WRITE "${tmp}" "${content}")
-  file(RENAME "${tmp}" "${file}")
-endfunction()
-
-function(_ExternalData_link_content name var_ext)
-  if("${ExternalData_LINK_CONTENT}" MATCHES "^(${_ExternalData_REGEX_ALGO})$")
-    set(algo "${ExternalData_LINK_CONTENT}")
-  else()
-    message(FATAL_ERROR
-      "Unknown hash algorithm specified by ExternalData_LINK_CONTENT:\n"
-      "  ${ExternalData_LINK_CONTENT}")
-  endif()
-  _ExternalData_compute_hash(hash "${algo}" "${name}")
-  get_filename_component(dir "${name}" PATH)
-  set(staged "${dir}/.ExternalData_${algo}_${hash}")
-  string(TOLOWER ".${algo}" ext)
-  _ExternalData_atomic_write("${name}${ext}" "${hash}\n")
-  file(RENAME "${name}" "${staged}")
-  set("${var_ext}" "${ext}" PARENT_SCOPE)
-
-  file(RELATIVE_PATH relname "${ExternalData_SOURCE_ROOT}" "${name}${ext}")
-  message(STATUS "Linked ${relname} to ExternalData ${algo}/${hash}")
-endfunction()
-
-function(_ExternalData_arg target arg options var_file)
-  # Separate data path from the options.
-  string(REPLACE "," ";" options "${options}")
-  list(GET options 0 data)
-  list(REMOVE_AT options 0)
-
-  # Interpret trailing slashes as directories.
-  set(data_is_directory 0)
-  if("x${data}" MATCHES "^x(.*)([/\\])$")
-    set(data_is_directory 1)
-    set(data "${CMAKE_MATCH_1}")
-  endif()
-
-  # Convert to full path.
-  if(IS_ABSOLUTE "${data}")
-    set(absdata "${data}")
-  else()
-    set(absdata "${CMAKE_CURRENT_SOURCE_DIR}/${data}")
-  endif()
-  get_filename_component(absdata "${absdata}" ABSOLUTE)
-
-  # Convert to relative path under the source tree.
-  if(NOT ExternalData_SOURCE_ROOT)
-    set(ExternalData_SOURCE_ROOT "${CMAKE_SOURCE_DIR}")
-  endif()
-  set(top_src "${ExternalData_SOURCE_ROOT}")
-  file(RELATIVE_PATH reldata "${top_src}" "${absdata}")
-  if(IS_ABSOLUTE "${reldata}" OR "${reldata}" MATCHES "^\\.\\./")
-    message(FATAL_ERROR "Data file referenced by argument\n"
-      "  ${arg}\n"
-      "does not lie under the top-level source directory\n"
-      "  ${top_src}\n")
-  endif()
-  if(data_is_directory AND NOT IS_DIRECTORY "${top_src}/${reldata}")
-    message(FATAL_ERROR "Data directory referenced by argument\n"
-      "  ${arg}\n"
-      "corresponds to source tree path\n"
-      "  ${reldata}\n"
-      "that does not exist as a directory!")
-  endif()
-  if(NOT ExternalData_BINARY_ROOT)
-    set(ExternalData_BINARY_ROOT "${CMAKE_BINARY_DIR}")
-  endif()
-  set(top_bin "${ExternalData_BINARY_ROOT}")
-
-  # Handle in-source builds gracefully.
-  if("${top_src}" STREQUAL "${top_bin}")
-    if(ExternalData_LINK_CONTENT)
-      message(WARNING "ExternalData_LINK_CONTENT cannot be used in-source")
-      set(ExternalData_LINK_CONTENT 0)
-    endif()
-    set(top_same 1)
-  endif()
-
-  set(external "") # Entries external to the source tree.
-  set(internal "") # Entries internal to the source tree.
-  set(have_original ${data_is_directory})
-  set(have_original_as_dir 0)
-
-  # Process options.
-  set(series_option "")
-  set(associated_files "")
-  set(associated_regex "")
-  foreach(opt ${options})
-    # Regular expression to match associated files.
-    if("x${opt}" MATCHES "^xREGEX:([^:/]+)$")
-      list(APPEND associated_regex "${CMAKE_MATCH_1}")
-    elseif(opt STREQUAL ":")
-      # Activate series matching.
-      set(series_option "${opt}")
-    elseif("x${opt}" MATCHES "^[^][:/*?]+$")
-      # Specific associated file.
-      list(APPEND associated_files "${opt}")
-    else()
-      message(FATAL_ERROR "Unknown option \"${opt}\" in argument\n"
-        "  ${arg}\n")
-    endif()
-  endforeach()
-
-  if(series_option)
-    if(data_is_directory)
-      message(FATAL_ERROR "Series option \"${series_option}\" not allowed with directories.")
-    endif()
-    if(associated_files OR associated_regex)
-      message(FATAL_ERROR "Series option \"${series_option}\" not allowed with associated files.")
-    endif()
-    # Load a whole file series.
-    _ExternalData_arg_series()
-  elseif(data_is_directory)
-    if(associated_files OR associated_regex)
-      # Load listed/matching associated files in the directory.
-      _ExternalData_arg_associated()
-    else()
-      message(FATAL_ERROR "Data directory referenced by argument\n"
-        "  ${arg}\n"
-        "must list associated files.")
-    endif()
-  else()
-    # Load the named data file.
-    _ExternalData_arg_single()
-    if(associated_files OR associated_regex)
-      # Load listed/matching associated files.
-      _ExternalData_arg_associated()
-    endif()
-  endif()
-
-  if(NOT have_original)
-    if(have_original_as_dir)
-      set(msg_kind FATAL_ERROR)
-      set(msg "that is directory instead of a file!")
-    else()
-      set(msg_kind AUTHOR_WARNING)
-      set(msg "that does not exist as a file (with or without an extension)!")
-    endif()
-    message(${msg_kind} "Data file referenced by argument\n"
-      "  ${arg}\n"
-      "corresponds to source tree path\n"
-      "  ${reldata}\n"
-      "${msg}")
-  endif()
-
-  if(external)
-    # Make the series available in the build tree.
-    set_property(GLOBAL APPEND PROPERTY
-      _ExternalData_${target}_FETCH "${external}")
-    set_property(GLOBAL APPEND PROPERTY
-      _ExternalData_${target}_LOCAL "${internal}")
-    set("${var_file}" "${top_bin}/${reldata}" PARENT_SCOPE)
-  else()
-    # The whole series is in the source tree.
-    set("${var_file}" "${top_src}/${reldata}" PARENT_SCOPE)
-  endif()
-endfunction()
-
-macro(_ExternalData_arg_associated)
-  # Associated files lie in the same directory.
-  if(data_is_directory)
-    set(reldir "${reldata}")
-  else()
-    get_filename_component(reldir "${reldata}" PATH)
-  endif()
-  if(reldir)
-    set(reldir "${reldir}/")
-  endif()
-  _ExternalData_exact_regex(reldir_regex "${reldir}")
-
-  # Find files named explicitly.
-  foreach(file ${associated_files})
-    _ExternalData_exact_regex(file_regex "${file}")
-    _ExternalData_arg_find_files("${reldir}${file}" "${reldir_regex}${file_regex}")
-  endforeach()
-
-  # Find files matching the given regular expressions.
-  set(all "")
-  set(sep "")
-  foreach(regex ${associated_regex})
-    set(all "${all}${sep}${reldir_regex}${regex}")
-    set(sep "|")
-  endforeach()
-  _ExternalData_arg_find_files("${reldir}" "${all}")
-endmacro()
-
-macro(_ExternalData_arg_single)
-  # Match only the named data by itself.
-  _ExternalData_exact_regex(data_regex "${reldata}")
-  _ExternalData_arg_find_files("${reldata}" "${data_regex}")
-endmacro()
-
-macro(_ExternalData_arg_series)
-  # Configure series parsing and matching.
-  set(series_parse_prefix "")
-  set(series_parse_number "\\1")
-  set(series_parse_suffix "\\2")
-  if(ExternalData_SERIES_PARSE)
-    if(ExternalData_SERIES_PARSE_NUMBER AND ExternalData_SERIES_PARSE_SUFFIX)
-      if(ExternalData_SERIES_PARSE_PREFIX)
-        set(series_parse_prefix "\\${ExternalData_SERIES_PARSE_PREFIX}")
-      endif()
-      set(series_parse_number "\\${ExternalData_SERIES_PARSE_NUMBER}")
-      set(series_parse_suffix "\\${ExternalData_SERIES_PARSE_SUFFIX}")
-    elseif(NOT "x${ExternalData_SERIES_PARSE}" MATCHES "^x\\([^()]*\\)\\([^()]*\\)\\$$")
-      message(FATAL_ERROR
-        "ExternalData_SERIES_PARSE is set to\n"
-        "  ${ExternalData_SERIES_PARSE}\n"
-        "which is not of the form\n"
-        "  (<number>)(<suffix>)$\n"
-        "Fix the regular expression or set variables\n"
-        "  ExternalData_SERIES_PARSE_PREFIX = <prefix> regex group number, if any\n"
-        "  ExternalData_SERIES_PARSE_NUMBER = <number> regex group number\n"
-        "  ExternalData_SERIES_PARSE_SUFFIX = <suffix> regex group number\n"
-        )
-    endif()
-    set(series_parse "${ExternalData_SERIES_PARSE}")
-  else()
-    set(series_parse "([0-9]*)(\\.[^./]*)$")
-  endif()
-  if(ExternalData_SERIES_MATCH)
-    set(series_match "${ExternalData_SERIES_MATCH}")
-  else()
-    set(series_match "[_.-]?[0-9]*")
-  endif()
-
-  # Parse the base, number, and extension components of the series.
-  string(REGEX REPLACE "${series_parse}" "${series_parse_prefix};${series_parse_number};${series_parse_suffix}" tuple "${reldata}")
-  list(LENGTH tuple len)
-  if(NOT "${len}" EQUAL 3)
-    message(FATAL_ERROR "Data file referenced by argument\n"
-      "  ${arg}\n"
-      "corresponds to path\n"
-      "  ${reldata}\n"
-      "that does not match regular expression\n"
-      "  ${series_parse}")
-  endif()
-  list(GET tuple 0 relbase)
-  list(GET tuple 2 ext)
-
-  # Glob files that might match the series.
-  # Then match base, number, and extension.
-  _ExternalData_exact_regex(series_base "${relbase}")
-  _ExternalData_exact_regex(series_ext "${ext}")
-  _ExternalData_arg_find_files("${relbase}*${ext}"
-    "${series_base}${series_match}${series_ext}")
-endmacro()
-
-function(_ExternalData_arg_find_files pattern regex)
-  file(GLOB globbed RELATIVE "${top_src}" "${top_src}/${pattern}*")
-  foreach(entry IN LISTS globbed)
-    if("x${entry}" MATCHES "^x(.*)(\\.(${_ExternalData_REGEX_EXT}))$")
-      set(relname "${CMAKE_MATCH_1}")
-      set(alg "${CMAKE_MATCH_2}")
-    else()
-      set(relname "${entry}")
-      set(alg "")
-    endif()
-    if("x${relname}" MATCHES "^x${regex}$" # matches
-        AND NOT "x${relname}" MATCHES "(^x|/)\\.ExternalData_" # not staged obj
-        )
-      if(IS_DIRECTORY "${top_src}/${entry}")
-        if("${relname}" STREQUAL "${reldata}")
-          set(have_original_as_dir 1)
-        endif()
-      else()
-        set(name "${top_src}/${relname}")
-        set(file "${top_bin}/${relname}")
-        if(alg)
-          list(APPEND external "${file}|${name}|${alg}")
-        elseif(ExternalData_LINK_CONTENT)
-          _ExternalData_link_content("${name}" alg)
-          list(APPEND external "${file}|${name}|${alg}")
-        elseif(NOT top_same)
-          list(APPEND internal "${file}|${name}")
-        endif()
-        if("${relname}" STREQUAL "${reldata}")
-          set(have_original 1)
-        endif()
-      endif()
-    endif()
-  endforeach()
-  set(external "${external}" PARENT_SCOPE)
-  set(internal "${internal}" PARENT_SCOPE)
-  set(have_original "${have_original}" PARENT_SCOPE)
-  set(have_original_as_dir "${have_original_as_dir}" PARENT_SCOPE)
-endfunction()
-
-#-----------------------------------------------------------------------------
-# Private script mode interface
-
-if(CMAKE_GENERATOR OR NOT ExternalData_ACTION)
-  return()
-endif()
-
-if(ExternalData_CONFIG)
-  include(${ExternalData_CONFIG})
-endif()
-if(NOT ExternalData_URL_TEMPLATES AND NOT ExternalData_OBJECT_STORES)
-  message(FATAL_ERROR
-    "Neither ExternalData_URL_TEMPLATES nor ExternalData_OBJECT_STORES is set!")
-endif()
-
-function(_ExternalData_link_or_copy src dst)
-  # Create a temporary file first.
-  get_filename_component(dst_dir "${dst}" PATH)
-  file(MAKE_DIRECTORY "${dst_dir}")
-  _ExternalData_random(random)
-  set(tmp "${dst}.tmp${random}")
-  if(UNIX)
-    # Create a symbolic link.
-    set(tgt "${src}")
-    if(relative_top)
-      # Use relative path if files are close enough.
-      file(RELATIVE_PATH relsrc "${relative_top}" "${src}")
-      file(RELATIVE_PATH relfile "${relative_top}" "${dst}")
-      if(NOT IS_ABSOLUTE "${relsrc}" AND NOT "${relsrc}" MATCHES "^\\.\\./" AND
-          NOT IS_ABSOLUTE "${reldst}" AND NOT "${reldst}" MATCHES "^\\.\\./")
-        file(RELATIVE_PATH tgt "${dst_dir}" "${src}")
-      endif()
-    endif()
-    execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${tgt}" "${tmp}" RESULT_VARIABLE result)
-  else()
-    # Create a copy.
-    execute_process(COMMAND "${CMAKE_COMMAND}" -E copy "${src}" "${tmp}" RESULT_VARIABLE result)
-  endif()
-  if(result)
-    file(REMOVE "${tmp}")
-    message(FATAL_ERROR "Failed to create\n  ${tmp}\nfrom\n  ${obj}")
-  endif()
-
-  # Atomically create/replace the real destination.
-  file(RENAME "${tmp}" "${dst}")
-endfunction()
-
-function(_ExternalData_download_file url file err_var msg_var)
-  set(retry 3)
-  while(retry)
-    math(EXPR retry "${retry} - 1")
-    if(ExternalData_TIMEOUT_INACTIVITY)
-      set(inactivity_timeout INACTIVITY_TIMEOUT ${ExternalData_TIMEOUT_INACTIVITY})
-    elseif(NOT "${ExternalData_TIMEOUT_INACTIVITY}" EQUAL 0)
-      set(inactivity_timeout INACTIVITY_TIMEOUT 60)
-    else()
-      set(inactivity_timeout "")
-    endif()
-    if(ExternalData_TIMEOUT_ABSOLUTE)
-      set(absolute_timeout TIMEOUT ${ExternalData_TIMEOUT_ABSOLUTE})
-    elseif(NOT "${ExternalData_TIMEOUT_ABSOLUTE}" EQUAL 0)
-      set(absolute_timeout TIMEOUT 300)
-    else()
-      set(absolute_timeout "")
-    endif()
-    file(DOWNLOAD "${url}" "${file}" STATUS status LOG log ${inactivity_timeout} ${absolute_timeout} SHOW_PROGRESS)
-    list(GET status 0 err)
-    list(GET status 1 msg)
-    if(err)
-      if("${msg}" MATCHES "HTTP response code said error" AND
-          "${log}" MATCHES "error: 503")
-        set(msg "temporarily unavailable")
-      endif()
-    elseif("${log}" MATCHES "\nHTTP[^\n]* 503")
-      set(err TRUE)
-      set(msg "temporarily unavailable")
-    endif()
-    if(NOT err OR NOT "${msg}" MATCHES "partial|timeout|temporarily")
-      break()
-    elseif(retry)
-      message(STATUS "[download terminated: ${msg}, retries left: ${retry}]")
-    endif()
-  endwhile()
-  set("${err_var}" "${err}" PARENT_SCOPE)
-  set("${msg_var}" "${msg}" PARENT_SCOPE)
-endfunction()
-
-function(_ExternalData_custom_fetch key loc file err_var msg_var)
-  if(NOT ExternalData_CUSTOM_SCRIPT_${key})
-    set(err 1)
-    set(msg "No ExternalData_CUSTOM_SCRIPT_${key} set!")
-  elseif(NOT EXISTS "${ExternalData_CUSTOM_SCRIPT_${key}}")
-    set(err 1)
-    set(msg "No '${ExternalData_CUSTOM_SCRIPT_${key}}' exists!")
-  else()
-    set(ExternalData_CUSTOM_LOCATION "${loc}")
-    set(ExternalData_CUSTOM_FILE "${file}")
-    unset(ExternalData_CUSTOM_ERROR)
-    include("${ExternalData_CUSTOM_SCRIPT_${key}}")
-    if(DEFINED ExternalData_CUSTOM_ERROR)
-      set(err 1)
-      set(msg "${ExternalData_CUSTOM_ERROR}")
-    else()
-      set(err 0)
-      set(msg "no error")
-    endif()
-  endif()
-  set("${err_var}" "${err}" PARENT_SCOPE)
-  set("${msg_var}" "${msg}" PARENT_SCOPE)
-endfunction()
-
-function(_ExternalData_download_object name hash algo var_obj)
-  # Search all object stores for an existing object.
-  foreach(dir ${ExternalData_OBJECT_STORES})
-    set(obj "${dir}/${algo}/${hash}")
-    if(EXISTS "${obj}")
-      message(STATUS "Found object: \"${obj}\"")
-      set("${var_obj}" "${obj}" PARENT_SCOPE)
-      return()
-    endif()
-  endforeach()
-
-  # Download object to the first store.
-  list(GET ExternalData_OBJECT_STORES 0 store)
-  set(obj "${store}/${algo}/${hash}")
-
-  _ExternalData_random(random)
-  set(tmp "${obj}.tmp${random}")
-  set(found 0)
-  set(tried "")
-  foreach(url_template IN LISTS ExternalData_URL_TEMPLATES)
-    string(REPLACE "%(hash)" "${hash}" url_tmp "${url_template}")
-    string(REPLACE "%(algo)" "${algo}" url "${url_tmp}")
-    message(STATUS "Fetching \"${url}\"")
-    if(url MATCHES "^ExternalDataCustomScript://([A-Za-z_][A-Za-z0-9_]*)/(.*)$")
-      _ExternalData_custom_fetch("${CMAKE_MATCH_1}" "${CMAKE_MATCH_2}" "${tmp}" err errMsg)
-    else()
-      _ExternalData_download_file("${url}" "${tmp}" err errMsg)
-    endif()
-    set(tried "${tried}\n  ${url}")
-    if(err)
-      set(tried "${tried} (${errMsg})")
-    else()
-      # Verify downloaded object.
-      _ExternalData_compute_hash(dl_hash "${algo}" "${tmp}")
-      if("${dl_hash}" STREQUAL "${hash}")
-        set(found 1)
-        break()
-      else()
-        set(tried "${tried} (wrong hash ${algo}=${dl_hash})")
-        if("$ENV{ExternalData_DEBUG_DOWNLOAD}" MATCHES ".")
-          file(RENAME "${tmp}" "${store}/${algo}/${dl_hash}")
-        endif()
-      endif()
-    endif()
-    file(REMOVE "${tmp}")
-  endforeach()
-
-  get_filename_component(dir "${name}" PATH)
-  set(staged "${dir}/.ExternalData_${algo}_${hash}")
-
-  if(found)
-    file(RENAME "${tmp}" "${obj}")
-    message(STATUS "Downloaded object: \"${obj}\"")
-  elseif(EXISTS "${staged}")
-    set(obj "${staged}")
-    message(STATUS "Staged object: \"${obj}\"")
-  else()
-    if(NOT tried)
-      set(tried "\n  (No ExternalData_URL_TEMPLATES given)")
-    endif()
-    message(FATAL_ERROR "Object ${algo}=${hash} not found at:${tried}")
-  endif()
-
-  set("${var_obj}" "${obj}" PARENT_SCOPE)
-endfunction()
-
-if("${ExternalData_ACTION}" STREQUAL "fetch")
-  foreach(v ExternalData_OBJECT_STORES file name ext)
-    if(NOT DEFINED "${v}")
-      message(FATAL_ERROR "No \"-D${v}=\" value provided!")
-    endif()
-  endforeach()
-
-  file(READ "${name}${ext}" hash)
-  string(STRIP "${hash}" hash)
-
-  if("${ext}" MATCHES "^\\.(${_ExternalData_REGEX_EXT})$")
-    string(TOUPPER "${CMAKE_MATCH_1}" algo)
-  else()
-    message(FATAL_ERROR "Unknown hash algorithm extension \"${ext}\"")
-  endif()
-
-  _ExternalData_download_object("${name}" "${hash}" "${algo}" obj)
-
-  # Check if file already corresponds to the object.
-  set(stamp "${ext}-stamp")
-  set(file_up_to_date 0)
-  if(EXISTS "${file}" AND EXISTS "${file}${stamp}")
-    file(READ "${file}${stamp}" f_hash)
-    string(STRIP "${f_hash}" f_hash)
-    if("${f_hash}" STREQUAL "${hash}")
-      #message(STATUS "File already corresponds to object")
-      set(file_up_to_date 1)
-    endif()
-  endif()
-
-  if(file_up_to_date)
-    # Touch the file to convince the build system it is up to date.
-    execute_process(COMMAND "${CMAKE_COMMAND}" -E touch "${file}")
-  else()
-    _ExternalData_link_or_copy("${obj}" "${file}")
-  endif()
-
-  # Atomically update the hash/timestamp file to record the object referenced.
-  _ExternalData_atomic_write("${file}${stamp}" "${hash}\n")
-elseif("${ExternalData_ACTION}" STREQUAL "local")
-  foreach(v file name)
-    if(NOT DEFINED "${v}")
-      message(FATAL_ERROR "No \"-D${v}=\" value provided!")
-    endif()
-  endforeach()
-  _ExternalData_link_or_copy("${name}" "${file}")
-else()
-  message(FATAL_ERROR "Unknown ExternalData_ACTION=[${ExternalData_ACTION}]")
-endif()
diff --git a/share/cmake-3.2/Modules/ExternalData_config.cmake.in b/share/cmake-3.2/Modules/ExternalData_config.cmake.in
deleted file mode 100644
index 4434e4b..0000000
--- a/share/cmake-3.2/Modules/ExternalData_config.cmake.in
+++ /dev/null
@@ -1,5 +0,0 @@
-set(ExternalData_OBJECT_STORES "@ExternalData_OBJECT_STORES@")
-set(ExternalData_URL_TEMPLATES "@ExternalData_URL_TEMPLATES@")
-set(ExternalData_TIMEOUT_INACTIVITY "@ExternalData_TIMEOUT_INACTIVITY@")
-set(ExternalData_TIMEOUT_ABSOLUTE "@ExternalData_TIMEOUT_ABSOLUTE@")
-@_ExternalData_CONFIG_CODE@
diff --git a/share/cmake-3.2/Modules/ExternalProject.cmake b/share/cmake-3.2/Modules/ExternalProject.cmake
deleted file mode 100644
index 74e8ae2..0000000
--- a/share/cmake-3.2/Modules/ExternalProject.cmake
+++ /dev/null
@@ -1,2332 +0,0 @@
-#[=======================================================================[.rst:
-ExternalProject
----------------
-
-Create custom targets to build projects in external trees
-
-.. command:: ExternalProject_Add
-
-  The ``ExternalProject_Add`` function creates a custom target to drive
-  download, update/patch, configure, build, install and test steps of an
-  external project::
-
-   ExternalProject_Add(<name> [<option>...])
-
-  General options are:
-
-  ``DEPENDS <projects>...``
-    Targets on which the project depends
-  ``PREFIX <dir>``
-    Root dir for entire project
-  ``LIST_SEPARATOR <sep>``
-    Sep to be replaced by ; in cmd lines
-  ``TMP_DIR <dir>``
-    Directory to store temporary files
-  ``STAMP_DIR <dir>``
-    Directory to store step timestamps
-  ``EXCLUDE_FROM_ALL 1``
-    The "all" target does not depend on this
-
-  Download step options are:
-
-  ``DOWNLOAD_NAME <fname>``
-    File name to store (if not end of URL)
-  ``DOWNLOAD_DIR <dir>``
-    Directory to store downloaded files
-  ``DOWNLOAD_COMMAND <cmd>...``
-    Command to download source tree
-  ``DOWNLOAD_NO_PROGRESS 1``
-    Disable download progress reports
-  ``CVS_REPOSITORY <cvsroot>``
-    CVSROOT of CVS repository
-  ``CVS_MODULE <mod>``
-    Module to checkout from CVS repo
-  ``CVS_TAG <tag>``
-    Tag to checkout from CVS repo
-  ``SVN_REPOSITORY <url>``
-    URL of Subversion repo
-  ``SVN_REVISION -r<rev>``
-    Revision to checkout from Subversion repo
-  ``SVN_USERNAME <username>``
-    Username for Subversion checkout and update
-  ``SVN_PASSWORD <password>``
-    Password for Subversion checkout and update
-  ``SVN_TRUST_CERT 1``
-    Trust the Subversion server site certificate
-  ``GIT_REPOSITORY <url>``
-    URL of git repo
-  ``GIT_TAG <tag>``
-    Git branch name, commit id or tag
-  ``GIT_SUBMODULES <module>...``
-    Git submodules that shall be updated, all if empty
-  ``HG_REPOSITORY <url>``
-    URL of mercurial repo
-  ``HG_TAG <tag>``
-    Mercurial branch name, commit id or tag
-  ``URL /.../src.tgz``
-    Full path or URL of source
-  ``URL_HASH ALGO=value``
-    Hash of file at URL
-  ``URL_MD5 md5``
-    Equivalent to URL_HASH MD5=md5
-  ``TLS_VERIFY <bool>``
-    Should certificate for https be checked
-  ``TLS_CAINFO <file>``
-    Path to a certificate authority file
-  ``TIMEOUT <seconds>``
-    Time allowed for file download operations
-
-  Update/Patch step options are:
-
-  ``UPDATE_COMMAND <cmd>...``
-    Source work-tree update command
-  ``UPDATE_DISCONNECTED 1``
-    Never update automatically from the remote repository
-  ``PATCH_COMMAND <cmd>...``
-    Command to patch downloaded source
-
-  Configure step options are:
-
-  ``SOURCE_DIR <dir>``
-    Source dir to be used for build
-  ``CONFIGURE_COMMAND <cmd>...``
-    Build tree configuration command
-  ``CMAKE_COMMAND /.../cmake``
-    Specify alternative cmake executable
-  ``CMAKE_GENERATOR <gen>``
-    Specify generator for native build
-  ``CMAKE_GENERATOR_PLATFORM <platform>``
-    Generator-specific platform name
-  ``CMAKE_GENERATOR_TOOLSET <toolset>``
-    Generator-specific toolset name
-  ``CMAKE_ARGS <arg>...``
-    Arguments to CMake command line.
-    These arguments are passed to CMake command line, and can contain
-    arguments other than cache values, see also
-    :manual:`CMake Options <cmake(1)>`. Arguments in the form
-    ``-Dvar:string=on`` are always passed to the command line, and
-    therefore cannot be changed by the user.
-  ``CMAKE_CACHE_ARGS <arg>...``
-    Initial cache arguments, of the form ``-Dvar:string=on``.
-    These arguments are written in a pre-load a script that populates
-    CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows to
-    overcome command line length limits.
-    These arguments are :command:`set` using the ``FORCE`` argument,
-    and therefore cannot be changed by the user.
-  ``CMAKE_CACHE_DEFAULT_ARGS <arg>...``
-    Initial default cache arguments, of the form ``-Dvar:string=on``.
-    These arguments are written in a pre-load a script that populates
-    CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows to
-    overcome command line length limits.
-    These arguments can be used as default value that will be set if no
-    previous value is found in the cache, and that the user can change
-    later.
-
-  Build step options are:
-
-  ``BINARY_DIR <dir>``
-    Specify build dir location
-  ``BUILD_COMMAND <cmd>...``
-    Command to drive the native build
-  ``BUILD_IN_SOURCE 1``
-    Use source dir for build dir
-  ``BUILD_ALWAYS 1``
-    No stamp file, build step always runs
-  ``BUILD_BYPRODUCTS <file>...``
-    Files that will be generated by the build command but may or may
-    not have their modification time updated by subsequent builds.
-
-  Install step options are:
-
-  ``INSTALL_DIR <dir>``
-    Installation prefix
-  ``INSTALL_COMMAND <cmd>...``
-    Command to drive install after build
-
-  Test step options are:
-
-  ``TEST_BEFORE_INSTALL 1``
-    Add test step executed before install step
-  ``TEST_AFTER_INSTALL 1``
-    Add test step executed after install step
-  ``TEST_EXCLUDE_FROM_MAIN 1``
-    Main target does not depend on the test step
-  ``TEST_COMMAND <cmd>...``
-    Command to drive test
-
-  Output logging options are:
-
-  ``LOG_DOWNLOAD 1``
-    Wrap download in script to log output
-  ``LOG_UPDATE 1``
-    Wrap update in script to log output
-  ``LOG_CONFIGURE 1``
-    Wrap configure in script to log output
-  ``LOG_BUILD 1``
-    Wrap build in script to log output
-  ``LOG_TEST 1``
-    Wrap test in script to log output
-  ``LOG_INSTALL 1``
-    Wrap install in script to log output
-
-  Other options are:
-
-  ``STEP_TARGETS <step-target>...``
-    Generate custom targets for these steps
-  ``INDEPENDENT_STEP_TARGETS <step-target>...``
-    Generate custom targets for these steps that do not depend on other
-    external projects even if a dependency is set
-
-  The ``*_DIR`` options specify directories for the project, with default
-  directories computed as follows.  If the ``PREFIX`` option is given to
-  ``ExternalProject_Add()`` or the ``EP_PREFIX`` directory property is set,
-  then an external project is built and installed under the specified prefix::
-
-   TMP_DIR      = <prefix>/tmp
-   STAMP_DIR    = <prefix>/src/<name>-stamp
-   DOWNLOAD_DIR = <prefix>/src
-   SOURCE_DIR   = <prefix>/src/<name>
-   BINARY_DIR   = <prefix>/src/<name>-build
-   INSTALL_DIR  = <prefix>
-
-  Otherwise, if the ``EP_BASE`` directory property is set then components
-  of an external project are stored under the specified base::
-
-   TMP_DIR      = <base>/tmp/<name>
-   STAMP_DIR    = <base>/Stamp/<name>
-   DOWNLOAD_DIR = <base>/Download/<name>
-   SOURCE_DIR   = <base>/Source/<name>
-   BINARY_DIR   = <base>/Build/<name>
-   INSTALL_DIR  = <base>/Install/<name>
-
-  If no ``PREFIX``, ``EP_PREFIX``, or ``EP_BASE`` is specified then the
-  default is to set ``PREFIX`` to ``<name>-prefix``.  Relative paths are
-  interpreted with respect to the build directory corresponding to the
-  source directory in which ``ExternalProject_Add`` is invoked.
-
-  If ``SOURCE_DIR`` is explicitly set to an existing directory the project
-  will be built from it.  Otherwise a download step must be specified
-  using one of the ``DOWNLOAD_COMMAND``, ``CVS_*``, ``SVN_*``, or ``URL``
-  options.  The ``URL`` option may refer locally to a directory or source
-  tarball, or refer to a remote tarball (e.g. ``http://.../src.tgz``).
-
-  If ``UPDATE_DISCONNECTED`` is set, the update step is not executed
-  automatically when building the main target. The update step can still
-  be added as a step target and called manually. This is useful if you
-  want to allow to build the project when you are disconnected from the
-  network (you might still need the network for the download step).
-  This is disabled by default.
-  The directory property ``EP_UPDATE_DISCONNECTED`` can be used to change
-  the default value for all the external projects in the current
-  directory and its subdirectories.
-
-.. command:: ExternalProject_Add_Step
-
-  The ``ExternalProject_Add_Step`` function adds a custom step to an
-  external project::
-
-   ExternalProject_Add_Step(<name> <step> [<option>...])
-
-  Options are:
-
-  ``COMMAND <cmd>...``
-    Command line invoked by this step
-  ``COMMENT "<text>..."``
-    Text printed when step executes
-  ``DEPENDEES <step>...``
-    Steps on which this step depends
-  ``DEPENDERS <step>...``
-    Steps that depend on this step
-  ``DEPENDS <file>...``
-    Files on which this step depends
-  ``BYPRODUCTS <file>...``
-    Files that will be generated by this step but may or may not
-    have their modification time updated by subsequent builds.
-  ``ALWAYS 1``
-    No stamp file, step always runs
-  ``EXCLUDE_FROM_MAIN 1``
-    Main target does not depend on this step
-  ``WORKING_DIRECTORY <dir>``
-    Working directory for command
-  ``LOG 1``
-    Wrap step in script to log output
-
-  The command line, comment, and working directory of every standard and
-  custom step is processed to replace tokens ``<SOURCE_DIR>``,
-  ``<BINARY_DIR>``, ``<INSTALL_DIR>``, and ``<TMP_DIR>`` with
-  corresponding property values.
-
-Any builtin step that specifies a ``<step>_COMMAND cmd...`` or custom
-step that specifies a ``COMMAND cmd...`` may specify additional command
-lines using the form ``COMMAND cmd...``.  At build time the commands
-will be executed in order and aborted if any one fails.  For example::
-
- ... BUILD_COMMAND make COMMAND echo done ...
-
-specifies to run ``make`` and then ``echo done`` during the build step.
-Whether the current working directory is preserved between commands is
-not defined.  Behavior of shell operators like ``&&`` is not defined.
-
-.. command:: ExternalProject_Get_Property
-
-  The ``ExternalProject_Get_Property`` function retrieves external project
-  target properties::
-
-    ExternalProject_Get_Property(<name> [prop1 [prop2 [...]]])
-
-  It stores property values in variables of the same name.  Property
-  names correspond to the keyword argument names of
-  ``ExternalProject_Add``.
-
-.. command:: ExternalProject_Add_StepTargets
-
-  The ``ExternalProject_Add_StepTargets`` function generates custom
-  targets for the steps listed::
-
-    ExternalProject_Add_StepTargets(<name> [NO_DEPENDS] [step1 [step2 [...]]])
-
-If ``NO_DEPENDS`` is set, the target will not depend on the
-dependencies of the complete project. This is usually safe to use for
-the download, update, and patch steps that do not require that all the
-dependencies are updated and built.  Using ``NO_DEPENDS`` for other
-of the default steps might break parallel builds, so you should avoid,
-it.  For custom steps, you should consider whether or not the custom
-commands requires that the dependencies are configured, built and
-installed.
-
-If ``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` is set then
-``ExternalProject_Add_StepTargets`` is automatically called at the end
-of matching calls to ``ExternalProject_Add_Step``.  Pass
-``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` explicitly to
-individual ``ExternalProject_Add`` calls, or implicitly to all
-``ExternalProject_Add`` calls by setting the directory properties
-``EP_STEP_TARGETS`` and ``EP_INDEPENDENT_STEP_TARGETS``.  The
-``INDEPENDENT`` version of the argument and of the property will call
-``ExternalProject_Add_StepTargets`` with the ``NO_DEPENDS`` argument.
-
-If ``STEP_TARGETS`` and ``INDEPENDENT_STEP_TARGETS`` are not set,
-clients may still manually call ``ExternalProject_Add_StepTargets``
-after calling ``ExternalProject_Add`` or ``ExternalProject_Add_Step``.
-
-This functionality is provided to make it easy to drive the steps
-independently of each other by specifying targets on build command
-lines.  For example, you may be submitting to a sub-project based
-dashboard, where you want to drive the configure portion of the build,
-then submit to the dashboard, followed by the build portion, followed
-by tests.  If you invoke a custom target that depends on a step
-halfway through the step dependency chain, then all the previous steps
-will also run to ensure everything is up to date.
-
-For example, to drive configure, build and test steps independently
-for each ``ExternalProject_Add`` call in your project, write the following
-line prior to any ``ExternalProject_Add`` calls in your ``CMakeLists.txt``
-file::
-
- set_property(DIRECTORY PROPERTY EP_STEP_TARGETS configure build test)
-
-.. command:: ExternalProject_Add_StepDependencies
-
-  The ``ExternalProject_Add_StepDependencies`` function add some
-  dependencies for some external project step::
-
-    ExternalProject_Add_StepDependencies(<name> <step> [target1 [target2 [...]]])
-
-  This function takes care to set both target and file level
-  dependencies, and will ensure that parallel builds will not break.
-  It should be used instead of :command:`add_dependencies()` when adding
-  a dependency for some of the step targets generated by
-  ``ExternalProject``.
-#]=======================================================================]
-
-#=============================================================================
-# Copyright 2008-2013 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Pre-compute a regex to match documented keywords for each command.
-math(EXPR _ep_documentation_line_count "${CMAKE_CURRENT_LIST_LINE} - 16")
-file(STRINGS "${CMAKE_CURRENT_LIST_FILE}" lines
-     LIMIT_COUNT ${_ep_documentation_line_count}
-     REGEX "^\\.\\. command:: [A-Za-z0-9_]+|^  ``[A-Z0-9_]+ .*``$")
-foreach(line IN LISTS lines)
-  if("${line}" MATCHES "^\\.\\. command:: ([A-Za-z0-9_]+)")
-    if(_ep_func)
-      set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}})$")
-    endif()
-    set(_ep_func "${CMAKE_MATCH_1}")
-    #message("function [${_ep_func}]")
-    set(_ep_keywords_${_ep_func} "^(")
-    set(_ep_keyword_sep)
-  elseif("${line}" MATCHES "^  ``([A-Z0-9_]+) .*``$")
-    set(_ep_key "${CMAKE_MATCH_1}")
-    #message("  keyword [${_ep_key}]")
-    set(_ep_keywords_${_ep_func}
-      "${_ep_keywords_${_ep_func}}${_ep_keyword_sep}${_ep_key}")
-    set(_ep_keyword_sep "|")
-  endif()
-endforeach()
-if(_ep_func)
-  set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}})$")
-endif()
-
-# Save regex matching supported hash algorithm names.
-set(_ep_hash_algos "MD5|SHA1|SHA224|SHA256|SHA384|SHA512")
-set(_ep_hash_regex "^(${_ep_hash_algos})=([0-9A-Fa-f]+)$")
-
-function(_ep_parse_arguments f name ns args)
-  # Transfer the arguments to this function into target properties for the
-  # new custom target we just added so that we can set up all the build steps
-  # correctly based on target properties.
-  #
-  # We loop through ARGN and consider the namespace starting with an
-  # upper-case letter followed by at least two more upper-case letters,
-  # numbers or underscores to be keywords.
-  set(key)
-
-  foreach(arg IN LISTS args)
-    set(is_value 1)
-
-    if(arg MATCHES "^[A-Z][A-Z0-9_][A-Z0-9_]+$" AND
-        NOT (("x${arg}x" STREQUAL "x${key}x") AND ("x${key}x" STREQUAL "xCOMMANDx")) AND
-        NOT arg MATCHES "^(TRUE|FALSE)$")
-      if(_ep_keywords_${f} AND arg MATCHES "${_ep_keywords_${f}}")
-        set(is_value 0)
-      endif()
-    endif()
-
-    if(is_value)
-      if(key)
-        # Value
-        if(NOT arg STREQUAL "")
-          set_property(TARGET ${name} APPEND PROPERTY ${ns}${key} "${arg}")
-        else()
-          get_property(have_key TARGET ${name} PROPERTY ${ns}${key} SET)
-          if(have_key)
-            get_property(value TARGET ${name} PROPERTY ${ns}${key})
-            set_property(TARGET ${name} PROPERTY ${ns}${key} "${value};${arg}")
-          else()
-            set_property(TARGET ${name} PROPERTY ${ns}${key} "${arg}")
-          endif()
-        endif()
-      else()
-        # Missing Keyword
-        message(AUTHOR_WARNING "value '${arg}' with no previous keyword in ${f}")
-      endif()
-    else()
-      set(key "${arg}")
-    endif()
-  endforeach()
-endfunction()
-
-
-define_property(DIRECTORY PROPERTY "EP_BASE" INHERITED
-  BRIEF_DOCS "Base directory for External Project storage."
-  FULL_DOCS
-  "See documentation of the ExternalProject_Add() function in the "
-  "ExternalProject module."
-  )
-
-define_property(DIRECTORY PROPERTY "EP_PREFIX" INHERITED
-  BRIEF_DOCS "Top prefix for External Project storage."
-  FULL_DOCS
-  "See documentation of the ExternalProject_Add() function in the "
-  "ExternalProject module."
-  )
-
-define_property(DIRECTORY PROPERTY "EP_STEP_TARGETS" INHERITED
-  BRIEF_DOCS
-  "List of ExternalProject steps that automatically get corresponding targets"
-  FULL_DOCS
-  "These targets will be dependent on the main target dependencies"
-  "See documentation of the ExternalProject_Add_StepTargets() function in the "
-  "ExternalProject module."
-  )
-
-define_property(DIRECTORY PROPERTY "EP_INDEPENDENT_STEP_TARGETS" INHERITED
-  BRIEF_DOCS
-  "List of ExternalProject steps that automatically get corresponding targets"
-  FULL_DOCS
-  "These targets will not be dependent on the main target dependencies"
-  "See documentation of the ExternalProject_Add_StepTargets() function in the "
-  "ExternalProject module."
-  )
-
-define_property(DIRECTORY PROPERTY "EP_UPDATE_DISCONNECTED" INHERITED
-  BRIEF_DOCS "Never update automatically from the remote repo."
-  FULL_DOCS
-  "See documentation of the ExternalProject_Add() function in the "
-  "ExternalProject module."
-  )
-
-function(_ep_write_gitclone_script script_filename source_dir git_EXECUTABLE git_repository git_tag git_submodules src_name work_dir gitclone_infofile gitclone_stampfile)
-  file(WRITE ${script_filename}
-"if(\"${git_tag}\" STREQUAL \"\")
-  message(FATAL_ERROR \"Tag for git checkout should not be empty.\")
-endif()
-
-set(run 0)
-
-if(\"${gitclone_infofile}\" IS_NEWER_THAN \"${gitclone_stampfile}\")
-  set(run 1)
-endif()
-
-if(NOT run)
-  message(STATUS \"Avoiding repeated git clone, stamp file is up to date: '${gitclone_stampfile}'\")
-  return()
-endif()
-
-execute_process(
-  COMMAND \${CMAKE_COMMAND} -E remove_directory \"${source_dir}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to remove directory: '${source_dir}'\")
-endif()
-
-# try the clone 3 times incase there is an odd git clone issue
-set(error_code 1)
-set(number_of_tries 0)
-while(error_code AND number_of_tries LESS 3)
-  execute_process(
-    COMMAND \"${git_EXECUTABLE}\" clone \"${git_repository}\" \"${src_name}\"
-    WORKING_DIRECTORY \"${work_dir}\"
-    RESULT_VARIABLE error_code
-    )
-  math(EXPR number_of_tries \"\${number_of_tries} + 1\")
-endwhile()
-if(number_of_tries GREATER 1)
-  message(STATUS \"Had to git clone more than once:
-          \${number_of_tries} times.\")
-endif()
-if(error_code)
-  message(FATAL_ERROR \"Failed to clone repository: '${git_repository}'\")
-endif()
-
-execute_process(
-  COMMAND \"${git_EXECUTABLE}\" checkout ${git_tag}
-  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to checkout tag: '${git_tag}'\")
-endif()
-
-execute_process(
-  COMMAND \"${git_EXECUTABLE}\" submodule init
-  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to init submodules in: '${work_dir}/${src_name}'\")
-endif()
-
-execute_process(
-  COMMAND \"${git_EXECUTABLE}\" submodule update --recursive ${git_submodules}
-  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to update submodules in: '${work_dir}/${src_name}'\")
-endif()
-
-# Complete success, update the script-last-run stamp file:
-#
-execute_process(
-  COMMAND \${CMAKE_COMMAND} -E copy
-    \"${gitclone_infofile}\"
-    \"${gitclone_stampfile}\"
-  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to copy script-last-run stamp file: '${gitclone_stampfile}'\")
-endif()
-
-"
-)
-
-endfunction()
-
-function(_ep_write_hgclone_script script_filename source_dir hg_EXECUTABLE hg_repository hg_tag src_name work_dir hgclone_infofile hgclone_stampfile)
-  file(WRITE ${script_filename}
-"if(\"${hg_tag}\" STREQUAL \"\")
-  message(FATAL_ERROR \"Tag for hg checkout should not be empty.\")
-endif()
-
-set(run 0)
-
-if(\"${hgclone_infofile}\" IS_NEWER_THAN \"${hgclone_stampfile}\")
-  set(run 1)
-endif()
-
-if(NOT run)
-  message(STATUS \"Avoiding repeated hg clone, stamp file is up to date: '${hgclone_stampfile}'\")
-  return()
-endif()
-
-execute_process(
-  COMMAND \${CMAKE_COMMAND} -E remove_directory \"${source_dir}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to remove directory: '${source_dir}'\")
-endif()
-
-execute_process(
-  COMMAND \"${hg_EXECUTABLE}\" clone \"${hg_repository}\" \"${src_name}\"
-  WORKING_DIRECTORY \"${work_dir}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to clone repository: '${hg_repository}'\")
-endif()
-
-execute_process(
-  COMMAND \"${hg_EXECUTABLE}\" update ${hg_tag}
-  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to checkout tag: '${hg_tag}'\")
-endif()
-
-# Complete success, update the script-last-run stamp file:
-#
-execute_process(
-  COMMAND \${CMAKE_COMMAND} -E copy
-    \"${hgclone_infofile}\"
-    \"${hgclone_stampfile}\"
-  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
-  RESULT_VARIABLE error_code
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to copy script-last-run stamp file: '${hgclone_stampfile}'\")
-endif()
-
-"
-)
-
-endfunction()
-
-
-function(_ep_write_gitupdate_script script_filename git_EXECUTABLE git_tag git_submodules git_repository work_dir)
-  file(WRITE ${script_filename}
-"if(\"${git_tag}\" STREQUAL \"\")
-  message(FATAL_ERROR \"Tag for git checkout should not be empty.\")
-endif()
-
-execute_process(
-  COMMAND \"${git_EXECUTABLE}\" rev-list --max-count=1 HEAD
-  WORKING_DIRECTORY \"${work_dir}\"
-  RESULT_VARIABLE error_code
-  OUTPUT_VARIABLE head_sha
-  OUTPUT_STRIP_TRAILING_WHITESPACE
-  )
-if(error_code)
-  message(FATAL_ERROR \"Failed to get the hash for HEAD\")
-endif()
-
-execute_process(
-  COMMAND \"${git_EXECUTABLE}\" show-ref ${git_tag}
-  WORKING_DIRECTORY \"${work_dir}\"
-  OUTPUT_VARIABLE show_ref_output
-  )
-# If a remote ref is asked for, which can possibly move around,
-# we must always do a fetch and checkout.
-if(\"\${show_ref_output}\" MATCHES \"remotes\")
-  set(is_remote_ref 1)
-else()
-  set(is_remote_ref 0)
-endif()
-
-# Tag is in the form <remote>/<tag> (i.e. origin/master) we must strip
-# the remote from the tag.
-if(\"\${show_ref_output}\" MATCHES \"refs/remotes/${git_tag}\")
-  string(REGEX MATCH \"^([^/]+)/(.+)$\" _unused \"${git_tag}\")
-  set(git_remote \"\${CMAKE_MATCH_1}\")
-  set(git_tag \"\${CMAKE_MATCH_2}\")
-else()
-  set(git_remote \"origin\")
-  set(git_tag \"${git_tag}\")
-endif()
-
-# This will fail if the tag does not exist (it probably has not been fetched
-# yet).
-execute_process(
-  COMMAND \"${git_EXECUTABLE}\" rev-list --max-count=1 ${git_tag}
-  WORKING_DIRECTORY \"${work_dir}\"
-  RESULT_VARIABLE error_code
-  OUTPUT_VARIABLE tag_sha
-  OUTPUT_STRIP_TRAILING_WHITESPACE
-  )
-
-# Is the hash checkout out that we want?
-if(error_code OR is_remote_ref OR NOT (\"\${tag_sha}\" STREQUAL \"\${head_sha}\"))
-  execute_process(
-    COMMAND \"${git_EXECUTABLE}\" fetch
-    WORKING_DIRECTORY \"${work_dir}\"
-    RESULT_VARIABLE error_code
-    )
-  if(error_code)
-    message(FATAL_ERROR \"Failed to fetch repository '${git_repository}'\")
-  endif()
-
-  if(is_remote_ref)
-    # Check if stash is needed
-    execute_process(
-      COMMAND \"${git_EXECUTABLE}\" status --porcelain
-      WORKING_DIRECTORY \"${work_dir}\"
-      RESULT_VARIABLE error_code
-      OUTPUT_VARIABLE repo_status
-      )
-    if(error_code)
-      message(FATAL_ERROR \"Failed to get the status\")
-    endif()
-    string(LENGTH \"\${repo_status}\" need_stash)
-
-    # If not in clean state, stash changes in order to be able to be able to
-    # perform git pull --rebase
-    if(need_stash)
-      execute_process(
-        COMMAND \"${git_EXECUTABLE}\" stash save --all --quiet
-        WORKING_DIRECTORY \"${work_dir}\"
-        RESULT_VARIABLE error_code
-        )
-      if(error_code)
-        message(FATAL_ERROR \"Failed to stash changes\")
-      endif()
-    endif()
-
-    # Pull changes from the remote branch
-    execute_process(
-      COMMAND \"${git_EXECUTABLE}\" rebase \${git_remote}/\${git_tag}
-      WORKING_DIRECTORY \"${work_dir}\"
-      RESULT_VARIABLE error_code
-      )
-    if(error_code)
-      # Rebase failed: Restore previous state.
-      execute_process(
-        COMMAND \"${git_EXECUTABLE}\" rebase --abort
-        WORKING_DIRECTORY \"${work_dir}\"
-      )
-      if(need_stash)
-        execute_process(
-          COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
-          WORKING_DIRECTORY \"${work_dir}\"
-          )
-      endif()
-      message(FATAL_ERROR \"\\nFailed to rebase in: '${work_dir}/${src_name}'.\\nYou will have to resolve the conflicts manually\")
-    endif()
-
-    if(need_stash)
-      execute_process(
-        COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
-        WORKING_DIRECTORY \"${work_dir}\"
-        RESULT_VARIABLE error_code
-        )
-      if(error_code)
-        # Stash pop --index failed: Try again dropping the index
-        execute_process(
-          COMMAND \"${git_EXECUTABLE}\" reset --hard --quiet
-          WORKING_DIRECTORY \"${work_dir}\"
-          RESULT_VARIABLE error_code
-          )
-        execute_process(
-          COMMAND \"${git_EXECUTABLE}\" stash pop --quiet
-          WORKING_DIRECTORY \"${work_dir}\"
-          RESULT_VARIABLE error_code
-          )
-        if(error_code)
-          # Stash pop failed: Restore previous state.
-          execute_process(
-            COMMAND \"${git_EXECUTABLE}\" reset --hard --quiet \${head_sha}
-            WORKING_DIRECTORY \"${work_dir}\"
-          )
-          execute_process(
-            COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
-            WORKING_DIRECTORY \"${work_dir}\"
-          )
-          message(FATAL_ERROR \"\\nFailed to unstash changes in: '${work_dir}/${src_name}'.\\nYou will have to resolve the conflicts manually\")
-        endif()
-      endif()
-    endif()
-  else()
-    execute_process(
-      COMMAND \"${git_EXECUTABLE}\" checkout ${git_tag}
-      WORKING_DIRECTORY \"${work_dir}\"
-      RESULT_VARIABLE error_code
-      )
-    if(error_code)
-      message(FATAL_ERROR \"Failed to checkout tag: '${git_tag}'\")
-    endif()
-  endif()
-
-  execute_process(
-    COMMAND \"${git_EXECUTABLE}\" submodule update --recursive ${git_submodules}
-    WORKING_DIRECTORY \"${work_dir}/${src_name}\"
-    RESULT_VARIABLE error_code
-    )
-  if(error_code)
-    message(FATAL_ERROR \"Failed to update submodules in: '${work_dir}/${src_name}'\")
-  endif()
-endif()
-
-"
-)
-
-endfunction(_ep_write_gitupdate_script)
-
-function(_ep_write_downloadfile_script script_filename remote local timeout no_progress hash tls_verify tls_cainfo)
-  if(timeout)
-    set(timeout_args TIMEOUT ${timeout})
-    set(timeout_msg "${timeout} seconds")
-  else()
-    set(timeout_args "# no TIMEOUT")
-    set(timeout_msg "none")
-  endif()
-
-  if(no_progress)
-    set(show_progress "")
-  else()
-    set(show_progress "SHOW_PROGRESS")
-  endif()
-
-  if("${hash}" MATCHES "${_ep_hash_regex}")
-    string(CONCAT hash_check
-      "if(EXISTS \"${local}\")\n"
-      "  file(\"${CMAKE_MATCH_1}\" \"${local}\" hash_value)\n"
-      "  if(\"x\${hash_value}\" STREQUAL \"x${CMAKE_MATCH_2}\")\n"
-      "    return()\n"
-      "  endif()\n"
-      "endif()\n"
-      )
-  else()
-    set(hash_check "")
-  endif()
-
-  # check for curl globals in the project
-  if(DEFINED CMAKE_TLS_VERIFY)
-    set(tls_verify "set(CMAKE_TLS_VERIFY ${CMAKE_TLS_VERIFY})")
-  endif()
-  if(DEFINED CMAKE_TLS_CAINFO)
-    set(tls_cainfo "set(CMAKE_TLS_CAINFO \"${CMAKE_TLS_CAINFO}\")")
-  endif()
-
-  # now check for curl locals so that the local values
-  # will override the globals
-
-  # check for tls_verify argument
-  string(LENGTH "${tls_verify}" tls_verify_len)
-  if(tls_verify_len GREATER 0)
-    set(tls_verify "set(CMAKE_TLS_VERIFY ${tls_verify})")
-  endif()
-  # check for tls_cainfo argument
-  string(LENGTH "${tls_cainfo}" tls_cainfo_len)
-  if(tls_cainfo_len GREATER 0)
-    set(tls_cainfo "set(CMAKE_TLS_CAINFO \"${tls_cainfo}\")")
-  endif()
-
-  file(WRITE ${script_filename}
-"${hash_check}message(STATUS \"downloading...
-     src='${remote}'
-     dst='${local}'
-     timeout='${timeout_msg}'\")
-
-${tls_verify}
-${tls_cainfo}
-
-file(DOWNLOAD
-  \"${remote}\"
-  \"${local}\"
-  ${show_progress}
-  ${timeout_args}
-  STATUS status
-  LOG log)
-
-list(GET status 0 status_code)
-list(GET status 1 status_string)
-
-if(NOT status_code EQUAL 0)
-  message(FATAL_ERROR \"error: downloading '${remote}' failed
-  status_code: \${status_code}
-  status_string: \${status_string}
-  log: \${log}
-\")
-endif()
-
-message(STATUS \"downloading... done\")
-"
-)
-
-endfunction()
-
-
-function(_ep_write_verifyfile_script script_filename local hash retries download_script)
-  if("${hash}" MATCHES "${_ep_hash_regex}")
-    set(algo "${CMAKE_MATCH_1}")
-    string(TOLOWER "${CMAKE_MATCH_2}" expect_value)
-    set(script_content "set(expect_value \"${expect_value}\")
-set(attempt 0)
-set(succeeded 0)
-while(\${attempt} LESS ${retries} OR \${attempt} EQUAL ${retries} AND NOT \${succeeded})
-  file(${algo} \"\${file}\" actual_value)
-  if(\"\${actual_value}\" STREQUAL \"\${expect_value}\")
-    set(succeeded 1)
-  elseif(\${attempt} LESS ${retries})
-    message(STATUS \"${algo} hash of \${file}
-does not match expected value
-  expected: \${expect_value}
-    actual: \${actual_value}
-Retrying download.
-\")
-    file(REMOVE \"\${file}\")
-    execute_process(COMMAND \${CMAKE_COMMAND} -P \"${download_script}\")
-  endif()
-  math(EXPR attempt \"\${attempt} + 1\")
-endwhile()
-
-if(\${succeeded})
-  message(STATUS \"verifying file... done\")
-else()
-  message(FATAL_ERROR \"error: ${algo} hash of
-  \${file}
-does not match expected value
-  expected: \${expect_value}
-    actual: \${actual_value}
-\")
-endif()")
-  else()
-    set(script_content "message(STATUS \"verifying file... warning: did not verify file - no URL_HASH specified?\")")
-  endif()
-  file(WRITE ${script_filename} "set(file \"${local}\")
-message(STATUS \"verifying file...
-     file='\${file}'\")
-${script_content}
-")
-endfunction()
-
-
-function(_ep_write_extractfile_script script_filename name filename directory)
-  set(args "")
-
-  if(filename MATCHES "(\\.|=)(7z|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
-    set(args xfz)
-  endif()
-
-  if(filename MATCHES "(\\.|=)tar$")
-    set(args xf)
-  endif()
-
-  if(args STREQUAL "")
-    message(SEND_ERROR "error: do not know how to extract '${filename}' -- known types are .7z, .tar, .tar.bz2, .tar.gz, .tar.xz, .tbz2, .tgz, .txz and .zip")
-    return()
-  endif()
-
-  file(WRITE ${script_filename}
-"# Make file names absolute:
-#
-get_filename_component(filename \"${filename}\" ABSOLUTE)
-get_filename_component(directory \"${directory}\" ABSOLUTE)
-
-message(STATUS \"extracting...
-     src='\${filename}'
-     dst='\${directory}'\")
-
-if(NOT EXISTS \"\${filename}\")
-  message(FATAL_ERROR \"error: file to extract does not exist: '\${filename}'\")
-endif()
-
-# Prepare a space for extracting:
-#
-set(i 1234)
-while(EXISTS \"\${directory}/../ex-${name}\${i}\")
-  math(EXPR i \"\${i} + 1\")
-endwhile()
-set(ut_dir \"\${directory}/../ex-${name}\${i}\")
-file(MAKE_DIRECTORY \"\${ut_dir}\")
-
-# Extract it:
-#
-message(STATUS \"extracting... [tar ${args}]\")
-execute_process(COMMAND \${CMAKE_COMMAND} -E tar ${args} \${filename}
-  WORKING_DIRECTORY \${ut_dir}
-  RESULT_VARIABLE rv)
-
-if(NOT rv EQUAL 0)
-  message(STATUS \"extracting... [error clean up]\")
-  file(REMOVE_RECURSE \"\${ut_dir}\")
-  message(FATAL_ERROR \"error: extract of '\${filename}' failed\")
-endif()
-
-# Analyze what came out of the tar file:
-#
-message(STATUS \"extracting... [analysis]\")
-file(GLOB contents \"\${ut_dir}/*\")
-list(LENGTH contents n)
-if(NOT n EQUAL 1 OR NOT IS_DIRECTORY \"\${contents}\")
-  set(contents \"\${ut_dir}\")
-endif()
-
-# Move \"the one\" directory to the final directory:
-#
-message(STATUS \"extracting... [rename]\")
-file(REMOVE_RECURSE \${directory})
-get_filename_component(contents \${contents} ABSOLUTE)
-file(RENAME \${contents} \${directory})
-
-# Clean up:
-#
-message(STATUS \"extracting... [clean up]\")
-file(REMOVE_RECURSE \"\${ut_dir}\")
-
-message(STATUS \"extracting... done\")
-"
-)
-
-endfunction()
-
-
-function(_ep_set_directories name)
-  get_property(prefix TARGET ${name} PROPERTY _EP_PREFIX)
-  if(NOT prefix)
-    get_property(prefix DIRECTORY PROPERTY EP_PREFIX)
-    if(NOT prefix)
-      get_property(base DIRECTORY PROPERTY EP_BASE)
-      if(NOT base)
-        set(prefix "${name}-prefix")
-      endif()
-    endif()
-  endif()
-  if(prefix)
-    set(tmp_default "${prefix}/tmp")
-    set(download_default "${prefix}/src")
-    set(source_default "${prefix}/src/${name}")
-    set(binary_default "${prefix}/src/${name}-build")
-    set(stamp_default "${prefix}/src/${name}-stamp")
-    set(install_default "${prefix}")
-  else()
-    set(tmp_default "${base}/tmp/${name}")
-    set(download_default "${base}/Download/${name}")
-    set(source_default "${base}/Source/${name}")
-    set(binary_default "${base}/Build/${name}")
-    set(stamp_default "${base}/Stamp/${name}")
-    set(install_default "${base}/Install/${name}")
-  endif()
-  get_property(build_in_source TARGET ${name} PROPERTY _EP_BUILD_IN_SOURCE)
-  if(build_in_source)
-    get_property(have_binary_dir TARGET ${name} PROPERTY _EP_BINARY_DIR SET)
-    if(have_binary_dir)
-      message(FATAL_ERROR
-        "External project ${name} has both BINARY_DIR and BUILD_IN_SOURCE!")
-    endif()
-  endif()
-  set(top "${CMAKE_CURRENT_BINARY_DIR}")
-  set(places stamp download source binary install tmp)
-  foreach(var ${places})
-    string(TOUPPER "${var}" VAR)
-    get_property(${var}_dir TARGET ${name} PROPERTY _EP_${VAR}_DIR)
-    if(NOT ${var}_dir)
-      set(${var}_dir "${${var}_default}")
-    endif()
-    if(NOT IS_ABSOLUTE "${${var}_dir}")
-      get_filename_component(${var}_dir "${top}/${${var}_dir}" ABSOLUTE)
-    endif()
-    set_property(TARGET ${name} PROPERTY _EP_${VAR}_DIR "${${var}_dir}")
-  endforeach()
-  if(build_in_source)
-    get_property(source_dir TARGET ${name} PROPERTY _EP_SOURCE_DIR)
-    set_property(TARGET ${name} PROPERTY _EP_BINARY_DIR "${source_dir}")
-  endif()
-
-  # Make the directories at CMake configure time *and* add a custom command
-  # to make them at build time. They need to exist at makefile generation
-  # time for Borland make and wmake so that CMake may generate makefiles
-  # with "cd C:\short\paths\with\no\spaces" commands in them.
-  #
-  # Additionally, the add_custom_command is still used in case somebody
-  # removes one of the necessary directories and tries to rebuild without
-  # re-running cmake.
-  foreach(var ${places})
-    string(TOUPPER "${var}" VAR)
-    get_property(dir TARGET ${name} PROPERTY _EP_${VAR}_DIR)
-    file(MAKE_DIRECTORY "${dir}")
-    if(NOT EXISTS "${dir}")
-      message(FATAL_ERROR "dir '${dir}' does not exist after file(MAKE_DIRECTORY)")
-    endif()
-  endforeach()
-endfunction()
-
-
-# IMPORTANT: this MUST be a macro and not a function because of the
-# in-place replacements that occur in each ${var}
-#
-macro(_ep_replace_location_tags target_name)
-  set(vars ${ARGN})
-  foreach(var ${vars})
-    if(${var})
-      foreach(dir SOURCE_DIR BINARY_DIR INSTALL_DIR TMP_DIR)
-        get_property(val TARGET ${target_name} PROPERTY _EP_${dir})
-        string(REPLACE "<${dir}>" "${val}" ${var} "${${var}}")
-      endforeach()
-    endif()
-  endforeach()
-endmacro()
-
-
-function(_ep_command_line_to_initial_cache var args force)
-  set(script_initial_cache "")
-  set(regex "^([^:]+):([^=]+)=(.*)$")
-  set(setArg "")
-  set(forceArg "")
-  if(force)
-    set(forceArg "FORCE")
-  endif()
-  foreach(line ${args})
-    if("${line}" MATCHES "^-D(.*)")
-      set(line "${CMAKE_MATCH_1}")
-      if(setArg)
-        # This is required to build up lists in variables, or complete an entry
-        set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})")
-        set(script_initial_cache "${script_initial_cache}\n${setArg}")
-        set(accumulator "")
-        set(setArg "")
-      endif()
-      if("${line}" MATCHES "${regex}")
-        set(name "${CMAKE_MATCH_1}")
-        set(type "${CMAKE_MATCH_2}")
-        set(value "${CMAKE_MATCH_3}")
-        set(setArg "set(${name} \"${value}")
-      else()
-        message(WARNING "Line '${line}' does not match regex. Ignoring.")
-      endif()
-    else()
-      # Assume this is a list to append to the last var
-      set(accumulator "${accumulator};${line}")
-    endif()
-  endforeach()
-  # Catch the final line of the args
-  if(setArg)
-    set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})")
-    set(script_initial_cache "${script_initial_cache}\n${setArg}")
-  endif()
-  set(${var} ${script_initial_cache} PARENT_SCOPE)
-endfunction()
-
-
-function(_ep_write_initial_cache target_name script_filename script_initial_cache)
-  # Write out values into an initial cache, that will be passed to CMake with -C
-  # Replace location tags.
-  _ep_replace_location_tags(${target_name} script_initial_cache)
-  # Write out the initial cache file to the location specified.
-  if(NOT EXISTS "${script_filename}.in")
-    file(WRITE "${script_filename}.in" "\@script_initial_cache\@\n")
-  endif()
-  configure_file("${script_filename}.in" "${script_filename}")
-endfunction()
-
-
-function(ExternalProject_Get_Property name)
-  foreach(var ${ARGN})
-    string(TOUPPER "${var}" VAR)
-    get_property(${var} TARGET ${name} PROPERTY _EP_${VAR})
-    if(NOT ${var})
-      message(FATAL_ERROR "External project \"${name}\" has no ${var}")
-    endif()
-    set(${var} "${${var}}" PARENT_SCOPE)
-  endforeach()
-endfunction()
-
-
-function(_ep_get_configure_command_id name cfg_cmd_id_var)
-  get_target_property(cmd ${name} _EP_CONFIGURE_COMMAND)
-
-  if(cmd STREQUAL "")
-    # Explicit empty string means no configure step for this project
-    set(${cfg_cmd_id_var} "none" PARENT_SCOPE)
-  else()
-    if(NOT cmd)
-      # Default is "use cmake":
-      set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
-    else()
-      # Otherwise we have to analyze the value:
-      if(cmd MATCHES "^[^;]*/configure")
-        set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
-      elseif(cmd MATCHES "^[^;]*/cmake" AND NOT cmd MATCHES ";-[PE];")
-        set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
-      elseif(cmd MATCHES "config")
-        set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
-      else()
-        set(${cfg_cmd_id_var} "unknown:${cmd}" PARENT_SCOPE)
-      endif()
-    endif()
-  endif()
-endfunction()
-
-
-function(_ep_get_build_command name step cmd_var)
-  set(cmd "${${cmd_var}}")
-  if(NOT cmd)
-    set(args)
-    _ep_get_configure_command_id(${name} cfg_cmd_id)
-    if(cfg_cmd_id STREQUAL "cmake")
-      # CMake project.  Select build command based on generator.
-      get_target_property(cmake_generator ${name} _EP_CMAKE_GENERATOR)
-      if("${CMAKE_GENERATOR}" MATCHES "Make" AND
-         ("${cmake_generator}" MATCHES "Make" OR NOT cmake_generator))
-        # The project uses the same Makefile generator.  Use recursive make.
-        set(cmd "$(MAKE)")
-        if(step STREQUAL "INSTALL")
-          set(args install)
-        endif()
-        if(step STREQUAL "TEST")
-          set(args test)
-        endif()
-      else()
-        # Drive the project with "cmake --build".
-        get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
-        if(cmake_command)
-          set(cmd "${cmake_command}")
-        else()
-          set(cmd "${CMAKE_COMMAND}")
-        endif()
-        set(args --build ${binary_dir} --config ${CMAKE_CFG_INTDIR})
-        if(step STREQUAL "INSTALL")
-          list(APPEND args --target install)
-        endif()
-        # But for "TEST" drive the project with corresponding "ctest".
-        if(step STREQUAL "TEST")
-          string(REGEX REPLACE "^(.*/)cmake([^/]*)$" "\\1ctest\\2" cmd "${cmd}")
-          set(args "")
-        endif()
-      endif()
-    else()
-      # Non-CMake project.  Guess "make" and "make install" and "make test".
-      if("${CMAKE_GENERATOR}" MATCHES "Makefiles")
-        # Try to get the parallel arguments
-        set(cmd "$(MAKE)")
-      else()
-        set(cmd "make")
-      endif()
-      if(step STREQUAL "INSTALL")
-        set(args install)
-      endif()
-      if(step STREQUAL "TEST")
-        set(args test)
-      endif()
-    endif()
-
-    # Use user-specified arguments instead of default arguments, if any.
-    get_property(have_args TARGET ${name} PROPERTY _EP_${step}_ARGS SET)
-    if(have_args)
-      get_target_property(args ${name} _EP_${step}_ARGS)
-    endif()
-
-    list(APPEND cmd ${args})
-  endif()
-
-  set(${cmd_var} "${cmd}" PARENT_SCOPE)
-endfunction()
-
-function(_ep_write_log_script name step cmd_var)
-  ExternalProject_Get_Property(${name} stamp_dir)
-  set(command "${${cmd_var}}")
-
-  set(make "")
-  set(code_cygpath_make "")
-  if(command MATCHES "^\\$\\(MAKE\\)")
-    # GNU make recognizes the string "$(MAKE)" as recursive make, so
-    # ensure that it appears directly in the makefile.
-    string(REGEX REPLACE "^\\$\\(MAKE\\)" "\${make}" command "${command}")
-    set(make "-Dmake=$(MAKE)")
-
-    if(WIN32 AND NOT CYGWIN)
-      set(code_cygpath_make "
-if(\${make} MATCHES \"^/\")
-  execute_process(
-    COMMAND cygpath -w \${make}
-    OUTPUT_VARIABLE cygpath_make
-    ERROR_VARIABLE cygpath_make
-    RESULT_VARIABLE cygpath_error
-    OUTPUT_STRIP_TRAILING_WHITESPACE
-  )
-  if(NOT cygpath_error)
-    set(make \${cygpath_make})
-  endif()
-endif()
-")
-    endif()
-  endif()
-
-  set(config "")
-  if("${CMAKE_CFG_INTDIR}" MATCHES "^\\$")
-    string(REPLACE "${CMAKE_CFG_INTDIR}" "\${config}" command "${command}")
-    set(config "-Dconfig=${CMAKE_CFG_INTDIR}")
-  endif()
-
-  # Wrap multiple 'COMMAND' lines up into a second-level wrapper
-  # script so all output can be sent to one log file.
-  if(command MATCHES ";COMMAND;")
-    set(code_execute_process "
-${code_cygpath_make}
-execute_process(COMMAND \${command} RESULT_VARIABLE result)
-if(result)
-  set(msg \"Command failed (\${result}):\\n\")
-  foreach(arg IN LISTS command)
-    set(msg \"\${msg} '\${arg}'\")
-  endforeach()
-  message(FATAL_ERROR \"\${msg}\")
-endif()
-")
-    set(code "")
-    set(cmd "")
-    set(sep "")
-    foreach(arg IN LISTS command)
-      if("x${arg}" STREQUAL "xCOMMAND")
-        set(code "${code}set(command \"${cmd}\")${code_execute_process}")
-        set(cmd "")
-        set(sep "")
-      else()
-        set(cmd "${cmd}${sep}${arg}")
-        set(sep ";")
-      endif()
-    endforeach()
-    set(code "${code}set(command \"${cmd}\")${code_execute_process}")
-    file(WRITE ${stamp_dir}/${name}-${step}-impl.cmake "${code}")
-    set(command ${CMAKE_COMMAND} "-Dmake=\${make}" "-Dconfig=\${config}" -P ${stamp_dir}/${name}-${step}-impl.cmake)
-  endif()
-
-  # Wrap the command in a script to log output to files.
-  set(script ${stamp_dir}/${name}-${step}.cmake)
-  set(logbase ${stamp_dir}/${name}-${step})
-  file(WRITE ${script} "
-${code_cygpath_make}
-set(command \"${command}\")
-execute_process(
-  COMMAND \${command}
-  RESULT_VARIABLE result
-  OUTPUT_FILE \"${logbase}-out.log\"
-  ERROR_FILE \"${logbase}-err.log\"
-  )
-if(result)
-  set(msg \"Command failed: \${result}\\n\")
-  foreach(arg IN LISTS command)
-    set(msg \"\${msg} '\${arg}'\")
-  endforeach()
-  set(msg \"\${msg}\\nSee also\\n  ${logbase}-*.log\")
-  message(FATAL_ERROR \"\${msg}\")
-else()
-  set(msg \"${name} ${step} command succeeded.  See also ${logbase}-*.log\")
-  message(STATUS \"\${msg}\")
-endif()
-")
-  set(command ${CMAKE_COMMAND} ${make} ${config} -P ${script})
-  set(${cmd_var} "${command}" PARENT_SCOPE)
-endfunction()
-
-# This module used to use "/${CMAKE_CFG_INTDIR}" directly and produced
-# makefiles with "/./" in paths for custom command dependencies. Which
-# resulted in problems with parallel make -j invocations.
-#
-# This function was added so that the suffix (search below for ${cfgdir}) is
-# only set to "/${CMAKE_CFG_INTDIR}" when ${CMAKE_CFG_INTDIR} is not going to
-# be "." (multi-configuration build systems like Visual Studio and Xcode...)
-#
-function(_ep_get_configuration_subdir_suffix suffix_var)
-  set(suffix "")
-  if(CMAKE_CONFIGURATION_TYPES)
-    set(suffix "/${CMAKE_CFG_INTDIR}")
-  endif()
-  set(${suffix_var} "${suffix}" PARENT_SCOPE)
-endfunction()
-
-
-function(_ep_get_step_stampfile name step stampfile_var)
-  ExternalProject_Get_Property(${name} stamp_dir)
-
-  _ep_get_configuration_subdir_suffix(cfgdir)
-  set(stampfile "${stamp_dir}${cfgdir}/${name}-${step}")
-
-  set(${stampfile_var} "${stampfile}" PARENT_SCOPE)
-endfunction()
-
-
-function(ExternalProject_Add_StepTargets name)
-  set(steps ${ARGN})
-  if("${ARGV1}" STREQUAL "NO_DEPENDS")
-    set(no_deps 1)
-    list(REMOVE_AT steps 0)
-  endif()
-  foreach(step ${steps})
-    if(no_deps  AND  "${step}" MATCHES "^(configure|build|install|test)$")
-      message(AUTHOR_WARNING "Using NO_DEPENDS for \"${step}\" step  might break parallel builds")
-    endif()
-    _ep_get_step_stampfile(${name} ${step} stamp_file)
-    add_custom_target(${name}-${step}
-      DEPENDS ${stamp_file})
-    set_property(TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP 1)
-    set_property(TARGET ${name}-${step} PROPERTY LABELS ${name})
-    set_property(TARGET ${name}-${step} PROPERTY FOLDER "ExternalProjectTargets/${name}")
-
-    # Depend on other external projects (target-level).
-    if(NOT no_deps)
-      get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
-      foreach(arg IN LISTS deps)
-        add_dependencies(${name}-${step} ${arg})
-      endforeach()
-    endif()
-  endforeach()
-endfunction()
-
-
-function(ExternalProject_Add_Step name step)
-  set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
-  _ep_get_configuration_subdir_suffix(cfgdir)
-
-  set(complete_stamp_file "${cmf_dir}${cfgdir}/${name}-complete")
-  _ep_get_step_stampfile(${name} ${step} stamp_file)
-
-  _ep_parse_arguments(ExternalProject_Add_Step
-                      ${name} _EP_${step}_ "${ARGN}")
-
-  get_property(exclude_from_main TARGET ${name} PROPERTY _EP_${step}_EXCLUDE_FROM_MAIN)
-  if(NOT exclude_from_main)
-    add_custom_command(APPEND
-      OUTPUT ${complete_stamp_file}
-      DEPENDS ${stamp_file}
-      )
-  endif()
-
-  # Steps depending on this step.
-  get_property(dependers TARGET ${name} PROPERTY _EP_${step}_DEPENDERS)
-  foreach(depender IN LISTS dependers)
-    _ep_get_step_stampfile(${name} ${depender} depender_stamp_file)
-    add_custom_command(APPEND
-      OUTPUT ${depender_stamp_file}
-      DEPENDS ${stamp_file}
-      )
-  endforeach()
-
-  # Dependencies on files.
-  get_property(depends TARGET ${name} PROPERTY _EP_${step}_DEPENDS)
-
-  # Byproducts of the step.
-  get_property(byproducts TARGET ${name} PROPERTY _EP_${step}_BYPRODUCTS)
-
-  # Dependencies on steps.
-  get_property(dependees TARGET ${name} PROPERTY _EP_${step}_DEPENDEES)
-  foreach(dependee IN LISTS dependees)
-    _ep_get_step_stampfile(${name} ${dependee} dependee_stamp_file)
-    list(APPEND depends ${dependee_stamp_file})
-  endforeach()
-
-  # The command to run.
-  get_property(command TARGET ${name} PROPERTY _EP_${step}_COMMAND)
-  if(command)
-    set(comment "Performing ${step} step for '${name}'")
-  else()
-    set(comment "No ${step} step for '${name}'")
-  endif()
-  get_property(work_dir TARGET ${name} PROPERTY _EP_${step}_WORKING_DIRECTORY)
-
-  # Replace list separators.
-  get_property(sep TARGET ${name} PROPERTY _EP_LIST_SEPARATOR)
-  if(sep AND command)
-    string(REPLACE "${sep}" "\\;" command "${command}")
-  endif()
-
-  # Replace location tags.
-  _ep_replace_location_tags(${name} comment command work_dir)
-
-  # Custom comment?
-  get_property(comment_set TARGET ${name} PROPERTY _EP_${step}_COMMENT SET)
-  if(comment_set)
-    get_property(comment TARGET ${name} PROPERTY _EP_${step}_COMMENT)
-  endif()
-
-  # Run every time?
-  get_property(always TARGET ${name} PROPERTY _EP_${step}_ALWAYS)
-  if(always)
-    set_property(SOURCE ${stamp_file} PROPERTY SYMBOLIC 1)
-    set(touch)
-    # Remove any existing stamp in case the option changed in an existing tree.
-    if(CMAKE_CONFIGURATION_TYPES)
-      foreach(cfg ${CMAKE_CONFIGURATION_TYPES})
-        string(REPLACE "/${CMAKE_CFG_INTDIR}" "/${cfg}" stamp_file_config "${stamp_file}")
-        file(REMOVE ${stamp_file_config})
-      endforeach()
-    else()
-      file(REMOVE ${stamp_file})
-    endif()
-  else()
-    set(touch ${CMAKE_COMMAND} -E touch ${stamp_file})
-  endif()
-
-  # Wrap with log script?
-  get_property(log TARGET ${name} PROPERTY _EP_${step}_LOG)
-  if(command AND log)
-    _ep_write_log_script(${name} ${step} command)
-  endif()
-
-  if("${command}" STREQUAL "")
-    # Some generators (i.e. Xcode) will not generate a file level target
-    # if no command is set, and therefore the dependencies on this
-    # target will be broken.
-    # The empty command is replaced by an echo command here in order to
-    # avoid this issue.
-    set(command ${CMAKE_COMMAND} -E echo_append)
-  endif()
-
-  add_custom_command(
-    OUTPUT ${stamp_file}
-    BYPRODUCTS ${byproducts}
-    COMMENT ${comment}
-    COMMAND ${command}
-    COMMAND ${touch}
-    DEPENDS ${depends}
-    WORKING_DIRECTORY ${work_dir}
-    VERBATIM
-    )
-  set_property(TARGET ${name} APPEND PROPERTY _EP_STEPS ${step})
-
-  # Add custom "step target"?
-  get_property(step_targets TARGET ${name} PROPERTY _EP_STEP_TARGETS)
-  if(NOT step_targets)
-    get_property(step_targets DIRECTORY PROPERTY EP_STEP_TARGETS)
-  endif()
-  foreach(st ${step_targets})
-    if("${st}" STREQUAL "${step}")
-      ExternalProject_Add_StepTargets(${name} ${step})
-      break()
-    endif()
-  endforeach()
-
-  get_property(independent_step_targets TARGET ${name} PROPERTY _EP_INDEPENDENT_STEP_TARGETS)
-  if(NOT independent_step_targets)
-    get_property(independent_step_targets DIRECTORY PROPERTY EP_INDEPENDENT_STEP_TARGETS)
-  endif()
-  foreach(st ${independent_step_targets})
-    if("${st}" STREQUAL "${step}")
-      ExternalProject_Add_StepTargets(${name} NO_DEPENDS ${step})
-      break()
-    endif()
-  endforeach()
-endfunction()
-
-
-function(ExternalProject_Add_StepDependencies name step)
-  set(dependencies ${ARGN})
-
-  # Sanity checks on "name" and "step".
-  if(NOT TARGET ${name})
-    message(FATAL_ERROR "Cannot find target \"${name}\". Perhaps it has not yet been created using ExternalProject_Add.")
-  endif()
-
-  get_property(is_ep TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT)
-  if(NOT is_ep)
-    message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add.")
-  endif()
-
-  get_property(steps TARGET ${name} PROPERTY _EP_STEPS)
-  list(FIND steps ${step} is_step)
-  if(NOT is_step)
-    message(FATAL_ERROR "External project \"${name}\" does not have a step \"${step}\".")
-  endif()
-
-  if(TARGET ${name}-${step})
-    get_property(is_ep_step TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP)
-    if(NOT is_ep_step)
-      message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add_StepTargets.")
-    endif()
-  endif()
-
-  # Always add file-level dependency, but add target-level dependency
-  # only if the target exists for that step.
-  _ep_get_step_stampfile(${name} ${step} stamp_file)
-  foreach(dep ${dependencies})
-    add_custom_command(APPEND
-      OUTPUT ${stamp_file}
-      DEPENDS ${dep})
-    if(TARGET ${name}-${step})
-      foreach(dep ${dependencies})
-        add_dependencies(${name}-${step} ${dep})
-      endforeach()
-    endif()
-  endforeach()
-
-endfunction()
-
-
-function(_ep_add_mkdir_command name)
-  ExternalProject_Get_Property(${name}
-    source_dir binary_dir install_dir stamp_dir download_dir tmp_dir)
-
-  _ep_get_configuration_subdir_suffix(cfgdir)
-
-  ExternalProject_Add_Step(${name} mkdir
-    COMMENT "Creating directories for '${name}'"
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${source_dir}
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${binary_dir}
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${install_dir}
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${tmp_dir}
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${stamp_dir}${cfgdir}
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${download_dir}
-    )
-endfunction()
-
-
-function(_ep_get_git_version git_EXECUTABLE git_version_var)
-  if(git_EXECUTABLE)
-    execute_process(
-      COMMAND "${git_EXECUTABLE}" --version
-      OUTPUT_VARIABLE ov
-      ERROR_VARIABLE ev
-      OUTPUT_STRIP_TRAILING_WHITESPACE
-      )
-    string(REGEX REPLACE "^git version (.+)$" "\\1" version "${ov}")
-    set(${git_version_var} "${version}" PARENT_SCOPE)
-  endif()
-endfunction()
-
-
-function(_ep_is_dir_empty dir empty_var)
-  file(GLOB gr "${dir}/*")
-  if("${gr}" STREQUAL "")
-    set(${empty_var} 1 PARENT_SCOPE)
-  else()
-    set(${empty_var} 0 PARENT_SCOPE)
-  endif()
-endfunction()
-
-
-function(_ep_add_download_command name)
-  ExternalProject_Get_Property(${name} source_dir stamp_dir download_dir tmp_dir)
-
-  get_property(cmd_set TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND SET)
-  get_property(cmd TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND)
-  get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
-  get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
-  get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
-  get_property(hg_repository  TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
-  get_property(url TARGET ${name} PROPERTY _EP_URL)
-  get_property(fname TARGET ${name} PROPERTY _EP_DOWNLOAD_NAME)
-
-  # TODO: Perhaps file:// should be copied to download dir before extraction.
-  string(REGEX REPLACE "^file://" "" url "${url}")
-
-  set(depends)
-  set(comment)
-  set(work_dir)
-
-  if(cmd_set)
-    set(work_dir ${download_dir})
-  elseif(cvs_repository)
-    find_package(CVS QUIET)
-    if(NOT CVS_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find cvs for checkout of ${name}")
-    endif()
-
-    get_target_property(cvs_module ${name} _EP_CVS_MODULE)
-    if(NOT cvs_module)
-      message(FATAL_ERROR "error: no CVS_MODULE")
-    endif()
-
-    get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
-
-    set(repository ${cvs_repository})
-    set(module ${cvs_module})
-    set(tag ${cvs_tag})
-    configure_file(
-      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
-      "${stamp_dir}/${name}-cvsinfo.txt"
-      @ONLY
-      )
-
-    get_filename_component(src_name "${source_dir}" NAME)
-    get_filename_component(work_dir "${source_dir}" PATH)
-    set(comment "Performing download step (CVS checkout) for '${name}'")
-    set(cmd ${CVS_EXECUTABLE} -d ${cvs_repository} -q co ${cvs_tag} -d ${src_name} ${cvs_module})
-    list(APPEND depends ${stamp_dir}/${name}-cvsinfo.txt)
-  elseif(svn_repository)
-    find_package(Subversion QUIET)
-    if(NOT Subversion_SVN_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find svn for checkout of ${name}")
-    endif()
-
-    get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
-    get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
-    get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
-    get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
-
-    set(repository "${svn_repository} user=${svn_username} password=${svn_password}")
-    set(module)
-    set(tag ${svn_revision})
-    configure_file(
-      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
-      "${stamp_dir}/${name}-svninfo.txt"
-      @ONLY
-      )
-
-    get_filename_component(src_name "${source_dir}" NAME)
-    get_filename_component(work_dir "${source_dir}" PATH)
-    set(comment "Performing download step (SVN checkout) for '${name}'")
-    set(svn_user_pw_args "")
-    if(DEFINED svn_username)
-      set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
-    endif()
-    if(DEFINED svn_password)
-      set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
-    endif()
-    if(svn_trust_cert)
-      set(svn_trust_cert_args --trust-server-cert)
-    endif()
-    set(cmd ${Subversion_SVN_EXECUTABLE} co ${svn_repository} ${svn_revision}
-      --non-interactive ${svn_trust_cert_args} ${svn_user_pw_args} ${src_name})
-    list(APPEND depends ${stamp_dir}/${name}-svninfo.txt)
-  elseif(git_repository)
-    find_package(Git QUIET)
-    if(NOT GIT_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find git for clone of ${name}")
-    endif()
-
-    # The git submodule update '--recursive' flag requires git >= v1.6.5
-    #
-    _ep_get_git_version("${GIT_EXECUTABLE}" git_version)
-    if(git_version VERSION_LESS 1.6.5)
-      message(FATAL_ERROR "error: git version 1.6.5 or later required for 'git submodule update --recursive': git_version='${git_version}'")
-    endif()
-
-    get_property(git_tag TARGET ${name} PROPERTY _EP_GIT_TAG)
-    if(NOT git_tag)
-      set(git_tag "master")
-    endif()
-    get_property(git_submodules TARGET ${name} PROPERTY _EP_GIT_SUBMODULES)
-
-    # For the download step, and the git clone operation, only the repository
-    # should be recorded in a configured RepositoryInfo file. If the repo
-    # changes, the clone script should be run again. But if only the tag
-    # changes, avoid running the clone script again. Let the 'always' running
-    # update step checkout the new tag.
-    #
-    set(repository ${git_repository})
-    set(module)
-    set(tag)
-    configure_file(
-      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
-      "${stamp_dir}/${name}-gitinfo.txt"
-      @ONLY
-      )
-
-    get_filename_component(src_name "${source_dir}" NAME)
-    get_filename_component(work_dir "${source_dir}" PATH)
-
-    # Since git clone doesn't succeed if the non-empty source_dir exists,
-    # create a cmake script to invoke as download command.
-    # The script will delete the source directory and then call git clone.
-    #
-    _ep_write_gitclone_script(${tmp_dir}/${name}-gitclone.cmake ${source_dir}
-      ${GIT_EXECUTABLE} ${git_repository} ${git_tag} "${git_submodules}" ${src_name} ${work_dir}
-      ${stamp_dir}/${name}-gitinfo.txt ${stamp_dir}/${name}-gitclone-lastrun.txt
-      )
-    set(comment "Performing download step (git clone) for '${name}'")
-    set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-gitclone.cmake)
-    list(APPEND depends ${stamp_dir}/${name}-gitinfo.txt)
-  elseif(hg_repository)
-    find_package(Hg QUIET)
-    if(NOT HG_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find hg for clone of ${name}")
-    endif()
-
-    get_property(hg_tag TARGET ${name} PROPERTY _EP_HG_TAG)
-    if(NOT hg_tag)
-      set(hg_tag "tip")
-    endif()
-
-    # For the download step, and the hg clone operation, only the repository
-    # should be recorded in a configured RepositoryInfo file. If the repo
-    # changes, the clone script should be run again. But if only the tag
-    # changes, avoid running the clone script again. Let the 'always' running
-    # update step checkout the new tag.
-    #
-    set(repository ${hg_repository})
-    set(module)
-    set(tag)
-    configure_file(
-      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
-      "${stamp_dir}/${name}-hginfo.txt"
-      @ONLY
-      )
-
-    get_filename_component(src_name "${source_dir}" NAME)
-    get_filename_component(work_dir "${source_dir}" PATH)
-
-    # Since hg clone doesn't succeed if the non-empty source_dir exists,
-    # create a cmake script to invoke as download command.
-    # The script will delete the source directory and then call hg clone.
-    #
-    _ep_write_hgclone_script(${tmp_dir}/${name}-hgclone.cmake ${source_dir}
-      ${HG_EXECUTABLE} ${hg_repository} ${hg_tag} ${src_name} ${work_dir}
-      ${stamp_dir}/${name}-hginfo.txt ${stamp_dir}/${name}-hgclone-lastrun.txt
-      )
-    set(comment "Performing download step (hg clone) for '${name}'")
-    set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-hgclone.cmake)
-    list(APPEND depends ${stamp_dir}/${name}-hginfo.txt)
-  elseif(url)
-    get_filename_component(work_dir "${source_dir}" PATH)
-    get_property(hash TARGET ${name} PROPERTY _EP_URL_HASH)
-    if(hash AND NOT "${hash}" MATCHES "${_ep_hash_regex}")
-      message(FATAL_ERROR "URL_HASH is set to\n  ${hash}\n"
-        "but must be ALGO=value where ALGO is\n  ${_ep_hash_algos}\n"
-        "and value is a hex string.")
-    endif()
-    get_property(md5 TARGET ${name} PROPERTY _EP_URL_MD5)
-    if(md5 AND NOT "MD5=${md5}" MATCHES "${_ep_hash_regex}")
-      message(FATAL_ERROR "URL_MD5 is set to\n  ${md5}\nbut must be a hex string.")
-    endif()
-    if(md5 AND NOT hash)
-      set(hash "MD5=${md5}")
-    endif()
-    set(repository "external project URL")
-    set(module "${url}")
-    set(tag "${hash}")
-    set(retries 0)
-    set(download_script "")
-    configure_file(
-      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
-      "${stamp_dir}/${name}-urlinfo.txt"
-      @ONLY
-      )
-    list(APPEND depends ${stamp_dir}/${name}-urlinfo.txt)
-    if(IS_DIRECTORY "${url}")
-      get_filename_component(abs_dir "${url}" ABSOLUTE)
-      set(comment "Performing download step (DIR copy) for '${name}'")
-      set(cmd   ${CMAKE_COMMAND} -E remove_directory ${source_dir}
-        COMMAND ${CMAKE_COMMAND} -E copy_directory ${abs_dir} ${source_dir})
-    else()
-      if("${url}" MATCHES "^[a-z]+://")
-        # TODO: Should download and extraction be different steps?
-        if("x${fname}" STREQUAL "x")
-          string(REGEX MATCH "[^/\\?]*$" fname "${url}")
-        endif()
-        if(NOT "${fname}" MATCHES "(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
-          string(REGEX MATCH "([^/\\?]+(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip))/.*$" match_result "${url}")
-          set(fname "${CMAKE_MATCH_1}")
-        endif()
-        if(NOT "${fname}" MATCHES "(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
-          message(FATAL_ERROR "Could not extract tarball filename from url:\n  ${url}")
-        endif()
-        string(REPLACE ";" "-" fname "${fname}")
-        set(file ${download_dir}/${fname})
-        get_property(timeout TARGET ${name} PROPERTY _EP_TIMEOUT)
-        get_property(no_progress TARGET ${name} PROPERTY _EP_DOWNLOAD_NO_PROGRESS)
-        get_property(tls_verify TARGET ${name} PROPERTY _EP_TLS_VERIFY)
-        get_property(tls_cainfo TARGET ${name} PROPERTY _EP_TLS_CAINFO)
-        set(download_script "${stamp_dir}/download-${name}.cmake")
-        _ep_write_downloadfile_script("${download_script}" "${url}" "${file}" "${timeout}" "${no_progress}" "${hash}" "${tls_verify}" "${tls_cainfo}")
-        set(cmd ${CMAKE_COMMAND} -P "${download_script}"
-          COMMAND)
-        set(retries 3)
-        set(comment "Performing download step (download, verify and extract) for '${name}'")
-      else()
-        set(file "${url}")
-        set(comment "Performing download step (verify and extract) for '${name}'")
-      endif()
-      _ep_write_verifyfile_script("${stamp_dir}/verify-${name}.cmake" "${file}" "${hash}" "${retries}" "${download_script}")
-      list(APPEND cmd ${CMAKE_COMMAND} -P ${stamp_dir}/verify-${name}.cmake
-        COMMAND)
-      _ep_write_extractfile_script("${stamp_dir}/extract-${name}.cmake" "${name}" "${file}" "${source_dir}")
-      list(APPEND cmd ${CMAKE_COMMAND} -P ${stamp_dir}/extract-${name}.cmake)
-    endif()
-  else()
-    _ep_is_dir_empty("${source_dir}" empty)
-    if(${empty})
-      message(SEND_ERROR "error: no download info for '${name}' -- please specify existing/non-empty SOURCE_DIR or one of URL, CVS_REPOSITORY and CVS_MODULE, SVN_REPOSITORY, GIT_REPOSITORY, HG_REPOSITORY or DOWNLOAD_COMMAND")
-    endif()
-  endif()
-
-  get_property(log TARGET ${name} PROPERTY _EP_LOG_DOWNLOAD)
-  if(log)
-    set(log LOG 1)
-  else()
-    set(log "")
-  endif()
-
-  ExternalProject_Add_Step(${name} download
-    COMMENT ${comment}
-    COMMAND ${cmd}
-    WORKING_DIRECTORY ${work_dir}
-    DEPENDS ${depends}
-    DEPENDEES mkdir
-    ${log}
-    )
-endfunction()
-
-
-function(_ep_add_update_command name)
-  ExternalProject_Get_Property(${name} source_dir tmp_dir)
-
-  get_property(cmd_set TARGET ${name} PROPERTY _EP_UPDATE_COMMAND SET)
-  get_property(cmd TARGET ${name} PROPERTY _EP_UPDATE_COMMAND)
-  get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
-  get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
-  get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
-  get_property(hg_repository  TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
-  get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET)
-  if(update_disconnected_set)
-    get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED)
-  else()
-    get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED)
-  endif()
-
-  set(work_dir)
-  set(comment)
-  set(always)
-
-  if(cmd_set)
-    set(work_dir ${source_dir})
-  elseif(cvs_repository)
-    if(NOT CVS_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find cvs for update of ${name}")
-    endif()
-    set(work_dir ${source_dir})
-    set(comment "Performing update step (CVS update) for '${name}'")
-    get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
-    set(cmd ${CVS_EXECUTABLE} -d ${cvs_repository} -q up -dP ${cvs_tag})
-    set(always 1)
-  elseif(svn_repository)
-    if(NOT Subversion_SVN_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find svn for update of ${name}")
-    endif()
-    set(work_dir ${source_dir})
-    set(comment "Performing update step (SVN update) for '${name}'")
-    get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
-    get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
-    get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
-    get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
-    set(svn_user_pw_args "")
-    if(DEFINED svn_username)
-      set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
-    endif()
-    if(DEFINED svn_password)
-      set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
-    endif()
-    if(svn_trust_cert)
-      set(svn_trust_cert_args --trust-server-cert)
-    endif()
-    set(cmd ${Subversion_SVN_EXECUTABLE} up ${svn_revision}
-      --non-interactive ${svn_trust_cert_args} ${svn_user_pw_args})
-    set(always 1)
-  elseif(git_repository)
-    if(NOT GIT_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find git for fetch of ${name}")
-    endif()
-    set(work_dir ${source_dir})
-    set(comment "Performing update step for '${name}'")
-    get_property(git_tag TARGET ${name} PROPERTY _EP_GIT_TAG)
-    if(NOT git_tag)
-      set(git_tag "master")
-    endif()
-    get_property(git_submodules TARGET ${name} PROPERTY _EP_GIT_SUBMODULES)
-    _ep_write_gitupdate_script(${tmp_dir}/${name}-gitupdate.cmake
-      ${GIT_EXECUTABLE} ${git_tag} "${git_submodules}" ${git_repository} ${work_dir}
-      )
-    set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-gitupdate.cmake)
-    set(always 1)
-  elseif(hg_repository)
-    if(NOT HG_EXECUTABLE)
-      message(FATAL_ERROR "error: could not find hg for pull of ${name}")
-    endif()
-    set(work_dir ${source_dir})
-    set(comment "Performing update step (hg pull) for '${name}'")
-    get_property(hg_tag TARGET ${name} PROPERTY _EP_HG_TAG)
-    if(NOT hg_tag)
-      set(hg_tag "tip")
-    endif()
-    if("${HG_VERSION_STRING}" STREQUAL "2.1")
-      message(WARNING "Mercurial 2.1 does not distinguish an empty pull from a failed pull:
- http://mercurial.selenic.com/wiki/UpgradeNotes#A2.1.1:_revert_pull_return_code_change.2C_compile_issue_on_OS_X
- http://thread.gmane.org/gmane.comp.version-control.mercurial.devel/47656
-Update to Mercurial >= 2.1.1.
-")
-    endif()
-    set(cmd ${HG_EXECUTABLE} pull
-      COMMAND ${HG_EXECUTABLE} update ${hg_tag}
-      )
-    set(always 1)
-  endif()
-
-  get_property(log TARGET ${name} PROPERTY _EP_LOG_UPDATE)
-  if(log)
-    set(log LOG 1)
-  else()
-    set(log "")
-  endif()
-
-  ExternalProject_Add_Step(${name} update
-    COMMENT ${comment}
-    COMMAND ${cmd}
-    ALWAYS ${always}
-    EXCLUDE_FROM_MAIN ${update_disconnected}
-    WORKING_DIRECTORY ${work_dir}
-    DEPENDEES download
-    ${log}
-    )
-
-  if(always AND update_disconnected)
-    _ep_get_step_stampfile(${name} skip-update skip-update_stamp_file)
-    string(REPLACE "Performing" "Skipping" comment "${comment}")
-    ExternalProject_Add_Step(${name} skip-update
-      COMMENT ${comment}
-      ALWAYS 1
-      EXCLUDE_FROM_MAIN 1
-      WORKING_DIRECTORY ${work_dir}
-      DEPENDEES download
-      ${log}
-    )
-    set_property(SOURCE ${skip-update_stamp_file} PROPERTY SYMBOLIC 1)
-  endif()
-
-endfunction()
-
-
-function(_ep_add_patch_command name)
-  ExternalProject_Get_Property(${name} source_dir)
-
-  get_property(cmd_set TARGET ${name} PROPERTY _EP_PATCH_COMMAND SET)
-  get_property(cmd TARGET ${name} PROPERTY _EP_PATCH_COMMAND)
-
-  set(work_dir)
-
-  if(cmd_set)
-    set(work_dir ${source_dir})
-  endif()
-
-  ExternalProject_Add_Step(${name} patch
-    COMMAND ${cmd}
-    WORKING_DIRECTORY ${work_dir}
-    DEPENDEES download
-    )
-endfunction()
-
-
-# TODO: Make sure external projects use the proper compiler
-function(_ep_add_configure_command name)
-  ExternalProject_Get_Property(${name} source_dir binary_dir tmp_dir)
-
-  # Depend on other external projects (file-level).
-  set(file_deps)
-  get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
-  foreach(dep IN LISTS deps)
-    get_property(is_ep TARGET ${dep} PROPERTY _EP_IS_EXTERNAL_PROJECT)
-    if(is_ep)
-      _ep_get_step_stampfile(${dep} "done" done_stamp_file)
-      list(APPEND file_deps ${done_stamp_file})
-    endif()
-  endforeach()
-
-  get_property(cmd_set TARGET ${name} PROPERTY _EP_CONFIGURE_COMMAND SET)
-  if(cmd_set)
-    get_property(cmd TARGET ${name} PROPERTY _EP_CONFIGURE_COMMAND)
-  else()
-    get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
-    if(cmake_command)
-      set(cmd "${cmake_command}")
-    else()
-      set(cmd "${CMAKE_COMMAND}")
-    endif()
-
-    get_property(cmake_args TARGET ${name} PROPERTY _EP_CMAKE_ARGS)
-    list(APPEND cmd ${cmake_args})
-
-    # If there are any CMAKE_CACHE_ARGS or CMAKE_CACHE_DEFAULT_ARGS,
-    # write an initial cache and use it
-    get_property(cmake_cache_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_ARGS)
-    get_property(cmake_cache_default_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_DEFAULT_ARGS)
-
-    if(cmake_cache_args OR cmake_cache_default_args)
-      set(_ep_cache_args_script "${tmp_dir}/${name}-cache.cmake")
-      if(cmake_cache_args)
-        _ep_command_line_to_initial_cache(script_initial_cache_force "${cmake_cache_args}" 1)
-      endif()
-      if(cmake_cache_default_args)
-        _ep_command_line_to_initial_cache(script_initial_cache_default "${cmake_cache_default_args}" 0)
-      endif()
-      _ep_write_initial_cache(${name} "${_ep_cache_args_script}" "${script_initial_cache_force}${script_initial_cache_default}")
-      list(APPEND cmd "-C${_ep_cache_args_script}")
-    endif()
-
-    get_target_property(cmake_generator ${name} _EP_CMAKE_GENERATOR)
-    get_target_property(cmake_generator_platform ${name} _EP_CMAKE_GENERATOR_PLATFORM)
-    get_target_property(cmake_generator_toolset ${name} _EP_CMAKE_GENERATOR_TOOLSET)
-    if(cmake_generator)
-      list(APPEND cmd "-G${cmake_generator}")
-      if(cmake_generator_platform)
-        list(APPEND cmd "-A${cmake_generator_platform}")
-      endif()
-      if(cmake_generator_toolset)
-        list(APPEND cmd "-T${cmake_generator_toolset}")
-      endif()
-    else()
-      if(CMAKE_EXTRA_GENERATOR)
-        list(APPEND cmd "-G${CMAKE_EXTRA_GENERATOR} - ${CMAKE_GENERATOR}")
-      else()
-        list(APPEND cmd "-G${CMAKE_GENERATOR}")
-      endif()
-      if(cmake_generator_platform)
-        message(FATAL_ERROR "Option CMAKE_GENERATOR_PLATFORM not allowed without CMAKE_GENERATOR.")
-      endif()
-      if(CMAKE_GENERATOR_PLATFORM)
-        list(APPEND cmd "-A${CMAKE_GENERATOR_PLATFORM}")
-      endif()
-      if(cmake_generator_toolset)
-        message(FATAL_ERROR "Option CMAKE_GENERATOR_TOOLSET not allowed without CMAKE_GENERATOR.")
-      endif()
-      if(CMAKE_GENERATOR_TOOLSET)
-        list(APPEND cmd "-T${CMAKE_GENERATOR_TOOLSET}")
-      endif()
-    endif()
-
-    list(APPEND cmd "${source_dir}")
-  endif()
-
-  # If anything about the configure command changes, (command itself, cmake
-  # used, cmake args or cmake generator) then re-run the configure step.
-  # Fixes issue http://public.kitware.com/Bug/view.php?id=10258
-  #
-  if(NOT EXISTS ${tmp_dir}/${name}-cfgcmd.txt.in)
-    file(WRITE ${tmp_dir}/${name}-cfgcmd.txt.in "cmd='\@cmd\@'\n")
-  endif()
-  configure_file(${tmp_dir}/${name}-cfgcmd.txt.in ${tmp_dir}/${name}-cfgcmd.txt)
-  list(APPEND file_deps ${tmp_dir}/${name}-cfgcmd.txt)
-  list(APPEND file_deps ${_ep_cache_args_script})
-
-  get_property(log TARGET ${name} PROPERTY _EP_LOG_CONFIGURE)
-  if(log)
-    set(log LOG 1)
-  else()
-    set(log "")
-  endif()
-
-  get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET)
-  if(update_disconnected_set)
-    get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED)
-  else()
-    get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED)
-  endif()
-  if(update_disconnected)
-    set(update_dep skip-update)
-  else()
-    set(update_dep update)
-  endif()
-
-  ExternalProject_Add_Step(${name} configure
-    COMMAND ${cmd}
-    WORKING_DIRECTORY ${binary_dir}
-    DEPENDEES ${update_dep} patch
-    DEPENDS ${file_deps}
-    ${log}
-    )
-endfunction()
-
-
-function(_ep_add_build_command name)
-  ExternalProject_Get_Property(${name} binary_dir)
-
-  get_property(cmd_set TARGET ${name} PROPERTY _EP_BUILD_COMMAND SET)
-  if(cmd_set)
-    get_property(cmd TARGET ${name} PROPERTY _EP_BUILD_COMMAND)
-  else()
-    _ep_get_build_command(${name} BUILD cmd)
-  endif()
-
-  get_property(log TARGET ${name} PROPERTY _EP_LOG_BUILD)
-  if(log)
-    set(log LOG 1)
-  else()
-    set(log "")
-  endif()
-
-  get_property(build_always TARGET ${name} PROPERTY _EP_BUILD_ALWAYS)
-  if(build_always)
-    set(always 1)
-  else()
-    set(always 0)
-  endif()
-
-  get_property(build_byproducts TARGET ${name} PROPERTY _EP_BUILD_BYPRODUCTS)
-
-  ExternalProject_Add_Step(${name} build
-    COMMAND ${cmd}
-    BYPRODUCTS ${build_byproducts}
-    WORKING_DIRECTORY ${binary_dir}
-    DEPENDEES configure
-    ALWAYS ${always}
-    ${log}
-    )
-endfunction()
-
-
-function(_ep_add_install_command name)
-  ExternalProject_Get_Property(${name} binary_dir)
-
-  get_property(cmd_set TARGET ${name} PROPERTY _EP_INSTALL_COMMAND SET)
-  if(cmd_set)
-    get_property(cmd TARGET ${name} PROPERTY _EP_INSTALL_COMMAND)
-  else()
-    _ep_get_build_command(${name} INSTALL cmd)
-  endif()
-
-  get_property(log TARGET ${name} PROPERTY _EP_LOG_INSTALL)
-  if(log)
-    set(log LOG 1)
-  else()
-    set(log "")
-  endif()
-
-  ExternalProject_Add_Step(${name} install
-    COMMAND ${cmd}
-    WORKING_DIRECTORY ${binary_dir}
-    DEPENDEES build
-    ${log}
-    )
-endfunction()
-
-
-function(_ep_add_test_command name)
-  ExternalProject_Get_Property(${name} binary_dir)
-
-  get_property(before TARGET ${name} PROPERTY _EP_TEST_BEFORE_INSTALL)
-  get_property(after TARGET ${name} PROPERTY _EP_TEST_AFTER_INSTALL)
-  get_property(exclude TARGET ${name} PROPERTY _EP_TEST_EXCLUDE_FROM_MAIN)
-  get_property(cmd_set TARGET ${name} PROPERTY _EP_TEST_COMMAND SET)
-
-  # Only actually add the test step if one of the test related properties is
-  # explicitly set. (i.e. the test step is omitted unless requested...)
-  #
-  if(cmd_set OR before OR after OR exclude)
-    if(cmd_set)
-      get_property(cmd TARGET ${name} PROPERTY _EP_TEST_COMMAND)
-    else()
-      _ep_get_build_command(${name} TEST cmd)
-    endif()
-
-    if(before)
-      set(dependees_args DEPENDEES build)
-    else()
-      set(dependees_args DEPENDEES install)
-    endif()
-
-    if(exclude)
-      set(dependers_args "")
-      set(exclude_args EXCLUDE_FROM_MAIN 1)
-    else()
-      if(before)
-        set(dependers_args DEPENDERS install)
-      else()
-        set(dependers_args "")
-      endif()
-      set(exclude_args "")
-    endif()
-
-    get_property(log TARGET ${name} PROPERTY _EP_LOG_TEST)
-    if(log)
-      set(log LOG 1)
-    else()
-      set(log "")
-    endif()
-
-    ExternalProject_Add_Step(${name} test
-      COMMAND ${cmd}
-      WORKING_DIRECTORY ${binary_dir}
-      ${dependees_args}
-      ${dependers_args}
-      ${exclude_args}
-      ${log}
-      )
-  endif()
-endfunction()
-
-
-function(ExternalProject_Add name)
-  _ep_get_configuration_subdir_suffix(cfgdir)
-
-  # Add a custom target for the external project.
-  set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
-  set(complete_stamp_file "${cmf_dir}${cfgdir}/${name}-complete")
-
-  # The "ALL" option to add_custom_target just tells it to not set the
-  # EXCLUDE_FROM_ALL target property. Later, if the EXCLUDE_FROM_ALL
-  # argument was passed, we explicitly set it for the target.
-  add_custom_target(${name} ALL DEPENDS ${complete_stamp_file})
-  set_property(TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT 1)
-  set_property(TARGET ${name} PROPERTY LABELS ${name})
-  set_property(TARGET ${name} PROPERTY FOLDER "ExternalProjectTargets/${name}")
-
-  _ep_parse_arguments(ExternalProject_Add ${name} _EP_ "${ARGN}")
-  _ep_set_directories(${name})
-  _ep_get_step_stampfile(${name} "done" done_stamp_file)
-  _ep_get_step_stampfile(${name} "install" install_stamp_file)
-
-  # Set the EXCLUDE_FROM_ALL target property if required.
-  get_property(exclude_from_all TARGET ${name} PROPERTY _EP_EXCLUDE_FROM_ALL)
-  if(exclude_from_all)
-    set_property(TARGET ${name} PROPERTY EXCLUDE_FROM_ALL TRUE)
-  endif()
-
-  # The 'complete' step depends on all other steps and creates a
-  # 'done' mark.  A dependent external project's 'configure' step
-  # depends on the 'done' mark so that it rebuilds when this project
-  # rebuilds.  It is important that 'done' is not the output of any
-  # custom command so that CMake does not propagate build rules to
-  # other external project targets, which may cause problems during
-  # parallel builds.  However, the Ninja generator needs to see the entire
-  # dependency graph, and can cope with custom commands belonging to
-  # multiple targets, so we add the 'done' mark as an output for Ninja only.
-  set(complete_outputs ${complete_stamp_file})
-  if(${CMAKE_GENERATOR} MATCHES "Ninja")
-    set(complete_outputs ${complete_outputs} ${done_stamp_file})
-  endif()
-
-  add_custom_command(
-    OUTPUT ${complete_outputs}
-    COMMENT "Completed '${name}'"
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${cmf_dir}${cfgdir}
-    COMMAND ${CMAKE_COMMAND} -E touch ${complete_stamp_file}
-    COMMAND ${CMAKE_COMMAND} -E touch ${done_stamp_file}
-    DEPENDS ${install_stamp_file}
-    VERBATIM
-    )
-
-
-  # Depend on other external projects (target-level).
-  get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
-  foreach(arg IN LISTS deps)
-    add_dependencies(${name} ${arg})
-  endforeach()
-
-  # Set up custom build steps based on the target properties.
-  # Each step depends on the previous one.
-  #
-  # The target depends on the output of the final step.
-  # (Already set up above in the DEPENDS of the add_custom_target command.)
-  #
-  _ep_add_mkdir_command(${name})
-  _ep_add_download_command(${name})
-  _ep_add_update_command(${name})
-  _ep_add_patch_command(${name})
-  _ep_add_configure_command(${name})
-  _ep_add_build_command(${name})
-  _ep_add_install_command(${name})
-
-  # Test is special in that it might depend on build, or it might depend
-  # on install.
-  #
-  _ep_add_test_command(${name})
-endfunction()
diff --git a/share/cmake-3.2/Modules/FeatureSummary.cmake b/share/cmake-3.2/Modules/FeatureSummary.cmake
deleted file mode 100644
index 3eea9db..0000000
--- a/share/cmake-3.2/Modules/FeatureSummary.cmake
+++ /dev/null
@@ -1,589 +0,0 @@
-#.rst:
-# FeatureSummary
-# --------------
-#
-# Macros for generating a summary of enabled/disabled features
-#
-#
-#
-# This module provides the macros feature_summary(),
-# set_package_properties() and add_feature_info().  For compatibility it
-# also still provides set_package_info(), set_feature_info(),
-# print_enabled_features() and print_disabled_features().
-#
-# These macros can be used to generate a summary of enabled and disabled
-# packages and/or feature for a build tree:
-#
-# ::
-#
-#     -- The following OPTIONAL packages have been found:
-#     LibXml2 (required version >= 2.4), XML processing lib, <http://xmlsoft.org>
-#        * Enables HTML-import in MyWordProcessor
-#        * Enables odt-export in MyWordProcessor
-#     PNG , A PNG image library. , <http://www.libpng.org/pub/png/>
-#        * Enables saving screenshots
-#     -- The following OPTIONAL packages have not been found:
-#     Lua51 , The Lua scripting language. , <http://www.lua.org>
-#        * Enables macros in MyWordProcessor
-#     Foo , Foo provides cool stuff.
-#
-#
-#
-#
-#
-# ::
-#
-#     FEATURE_SUMMARY( [FILENAME <file>]
-#                      [APPEND]
-#                      [VAR <variable_name>]
-#                      [INCLUDE_QUIET_PACKAGES]
-#                      [FATAL_ON_MISSING_REQUIRED_PACKAGES]
-#                      [DESCRIPTION "Found packages:"]
-#                      WHAT (ALL | PACKAGES_FOUND | PACKAGES_NOT_FOUND
-#                           | ENABLED_FEATURES | DISABLED_FEATURES)
-#                    )
-#
-#
-#
-# The FEATURE_SUMMARY() macro can be used to print information about
-# enabled or disabled packages or features of a project.  By default,
-# only the names of the features/packages will be printed and their
-# required version when one was specified.  Use SET_PACKAGE_PROPERTIES()
-# to add more useful information, like e.g.  a download URL for the
-# respective package or their purpose in the project.
-#
-# The WHAT option is the only mandatory option.  Here you specify what
-# information will be printed:
-#
-# ``ALL``
-#  print everything
-# ``ENABLED_FEATURES``
-#  the list of all features which are enabled
-# ``DISABLED_FEATURES``
-#  the list of all features which are disabled
-# ``PACKAGES_FOUND``
-#  the list of all packages which have been found
-# ``PACKAGES_NOT_FOUND``
-#  the list of all packages which have not been found
-# ``OPTIONAL_PACKAGES_FOUND``
-#  only those packages which have been found which have the type OPTIONAL
-# ``OPTIONAL_PACKAGES_NOT_FOUND``
-#  only those packages which have not been found which have the type OPTIONAL
-# ``RECOMMENDED_PACKAGES_FOUND``
-#  only those packages which have been found which have the type RECOMMENDED
-# ``RECOMMENDED_PACKAGES_NOT_FOUND``
-#  only those packages which have not been found which have the type RECOMMENDED
-# ``REQUIRED_PACKAGES_FOUND``
-#  only those packages which have been found which have the type REQUIRED
-# ``REQUIRED_PACKAGES_NOT_FOUND``
-#  only those packages which have not been found which have the type REQUIRED
-# ``RUNTIME_PACKAGES_FOUND``
-#  only those packages which have been found which have the type RUNTIME
-# ``RUNTIME_PACKAGES_NOT_FOUND``
-#  only those packages which have not been found which have the type RUNTIME
-#
-# With the exception of the ``ALL`` value, these values can be combined
-# in order to customize the output. For example:
-#
-# ::
-#
-#    feature_summary(WHAT ENABLED_FEATURES DISABLED_FEATURES)
-#
-#
-#
-# If a FILENAME is given, the information is printed into this file.  If
-# APPEND is used, it is appended to this file, otherwise the file is
-# overwritten if it already existed.  If the VAR option is used, the
-# information is "printed" into the specified variable.  If FILENAME is
-# not used, the information is printed to the terminal.  Using the
-# DESCRIPTION option a description or headline can be set which will be
-# printed above the actual content.  If INCLUDE_QUIET_PACKAGES is given,
-# packages which have been searched with find_package(...  QUIET) will
-# also be listed.  By default they are skipped.  If
-# FATAL_ON_MISSING_REQUIRED_PACKAGES is given, CMake will abort if a
-# package which is marked as REQUIRED has not been found.
-#
-# Example 1, append everything to a file:
-#
-# ::
-#
-#    feature_summary(WHAT ALL
-#                    FILENAME ${CMAKE_BINARY_DIR}/all.log APPEND)
-#
-#
-#
-# Example 2, print the enabled features into the variable
-# enabledFeaturesText, including QUIET packages:
-#
-# ::
-#
-#    feature_summary(WHAT ENABLED_FEATURES
-#                    INCLUDE_QUIET_PACKAGES
-#                    DESCRIPTION "Enabled Features:"
-#                    VAR enabledFeaturesText)
-#    message(STATUS "${enabledFeaturesText}")
-#
-#
-#
-#
-#
-# ::
-#
-#     SET_PACKAGE_PROPERTIES(<name> PROPERTIES
-#                            [ URL <url> ]
-#                            [ DESCRIPTION <description> ]
-#                            [ TYPE (RUNTIME|OPTIONAL|RECOMMENDED|REQUIRED) ]
-#                            [ PURPOSE <purpose> ]
-#                           )
-#
-#
-#
-# Use this macro to set up information about the named package, which
-# can then be displayed via FEATURE_SUMMARY().  This can be done either
-# directly in the Find-module or in the project which uses the module
-# after the find_package() call.  The features for which information can
-# be set are added automatically by the find_package() command.
-#
-# URL: this should be the homepage of the package, or something similar.
-# Ideally this is set already directly in the Find-module.
-#
-# DESCRIPTION: A short description what that package is, at most one
-# sentence.  Ideally this is set already directly in the Find-module.
-#
-# TYPE: What type of dependency has the using project on that package.
-# Default is OPTIONAL.  In this case it is a package which can be used
-# by the project when available at buildtime, but it also work without.
-# RECOMMENDED is similar to OPTIONAL, i.e.  the project will build if
-# the package is not present, but the functionality of the resulting
-# binaries will be severly limited.  If a REQUIRED package is not
-# available at buildtime, the project may not even build.  This can be
-# combined with the FATAL_ON_MISSING_REQUIRED_PACKAGES argument for
-# feature_summary().  Last, a RUNTIME package is a package which is
-# actually not used at all during the build, but which is required for
-# actually running the resulting binaries.  So if such a package is
-# missing, the project can still be built, but it may not work later on.
-# If set_package_properties() is called multiple times for the same
-# package with different TYPEs, the TYPE is only changed to higher TYPEs
-# ( RUNTIME < OPTIONAL < RECOMMENDED < REQUIRED ), lower TYPEs are
-# ignored.  The TYPE property is project-specific, so it cannot be set
-# by the Find-module, but must be set in the project.
-#
-# PURPOSE: This describes which features this package enables in the
-# project, i.e.  it tells the user what functionality he gets in the
-# resulting binaries.  If set_package_properties() is called multiple
-# times for a package, all PURPOSE properties are appended to a list of
-# purposes of the package in the project.  As the TYPE property, also
-# the PURPOSE property is project-specific, so it cannot be set by the
-# Find-module, but must be set in the project.
-#
-#
-#
-# Example for setting the info for a package:
-#
-# ::
-#
-#    find_package(LibXml2)
-#    set_package_properties(LibXml2 PROPERTIES
-#                           DESCRIPTION "A XML processing library."
-#                           URL "http://xmlsoft.org/")
-#
-#
-#
-# ::
-#
-#    set_package_properties(LibXml2 PROPERTIES
-#                           TYPE RECOMMENDED
-#                           PURPOSE "Enables HTML-import in MyWordProcessor")
-#    ...
-#    set_package_properties(LibXml2 PROPERTIES
-#                           TYPE OPTIONAL
-#                           PURPOSE "Enables odt-export in MyWordProcessor")
-#
-#
-#
-# ::
-#
-#    find_package(DBUS)
-#    set_package_properties(DBUS PROPERTIES
-#      TYPE RUNTIME
-#      PURPOSE "Necessary to disable the screensaver during a presentation" )
-#
-#
-#
-# ::
-#
-#     ADD_FEATURE_INFO(<name> <enabled> <description>)
-#
-# Use this macro to add information about a feature with the given
-# <name>.  <enabled> contains whether this feature is enabled or not,
-# <description> is a text describing the feature.  The information can
-# be displayed using feature_summary() for ENABLED_FEATURES and
-# DISABLED_FEATURES respectively.
-#
-# Example for setting the info for a feature:
-#
-# ::
-#
-#    option(WITH_FOO "Help for foo" ON)
-#    add_feature_info(Foo WITH_FOO "The Foo feature provides very cool stuff.")
-#
-#
-#
-#
-#
-# The following macros are provided for compatibility with previous
-# CMake versions:
-#
-# ::
-#
-#     SET_PACKAGE_INFO(<name> <description> [<url> [<purpose>] ] )
-#
-# Use this macro to set up information about the named package, which
-# can then be displayed via FEATURE_SUMMARY().  This can be done either
-# directly in the Find-module or in the project which uses the module
-# after the find_package() call.  The features for which information can
-# be set are added automatically by the find_package() command.
-#
-# ::
-#
-#     PRINT_ENABLED_FEATURES()
-#
-# Does the same as FEATURE_SUMMARY(WHAT ENABLED_FEATURES DESCRIPTION
-# "Enabled features:")
-#
-# ::
-#
-#     PRINT_DISABLED_FEATURES()
-#
-# Does the same as FEATURE_SUMMARY(WHAT DISABLED_FEATURES DESCRIPTION
-# "Disabled features:")
-#
-# ::
-#
-#     SET_FEATURE_INFO(<name> <description> [<url>] )
-#
-# Does the same as SET_PACKAGE_INFO(<name> <description> <url> )
-
-#=============================================================================
-# Copyright 2007-2015 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include("${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake")
-
-
-function(ADD_FEATURE_INFO _name _enabled _desc)
-  if (${_enabled})
-    set_property(GLOBAL APPEND PROPERTY ENABLED_FEATURES "${_name}")
-  else ()
-    set_property(GLOBAL APPEND PROPERTY DISABLED_FEATURES "${_name}")
-  endif ()
-
-  set_property(GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION "${_desc}" )
-endfunction()
-
-
-
-function(SET_PACKAGE_PROPERTIES _name _props)
-  if(NOT "${_props}" STREQUAL "PROPERTIES")
-    message(FATAL_ERROR "PROPERTIES keyword is missing in SET_PACKAGE_PROPERTIES() call.")
-  endif()
-
-  set(options ) # none
-  set(oneValueArgs DESCRIPTION URL TYPE PURPOSE )
-  set(multiValueArgs ) # none
-
-  CMAKE_PARSE_ARGUMENTS(_SPP "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
-
-  if(_SPP_UNPARSED_ARGUMENTS)
-    message(FATAL_ERROR "Unknown keywords given to SET_PACKAGE_PROPERTIES(): \"${_SPP_UNPARSED_ARGUMENTS}\"")
-  endif()
-
-  if(_SPP_DESCRIPTION)
-    get_property(_info  GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION)
-    if(_info AND NOT "${_info}" STREQUAL "${_SPP_DESCRIPTION}")
-      message(STATUS "Warning: Property DESCRIPTION for package ${_name} already set to \"${_info}\", overriding it with \"${_SPP_DESCRIPTION}\"")
-    endif()
-
-    set_property(GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION "${_SPP_DESCRIPTION}" )
-  endif()
-
-
-  if(_SPP_URL)
-    get_property(_info  GLOBAL PROPERTY _CMAKE_${_name}_URL)
-    if(_info AND NOT "${_info}" STREQUAL "${_SPP_URL}")
-      message(STATUS "Warning: Property URL already set to \"${_info}\", overriding it with \"${_SPP_URL}\"")
-    endif()
-
-    set_property(GLOBAL PROPERTY _CMAKE_${_name}_URL "${_SPP_URL}" )
-  endif()
-
-
-  # handle the PURPOSE: use APPEND, since there can be multiple purposes for one package inside a project
-  if(_SPP_PURPOSE)
-    set_property(GLOBAL APPEND PROPERTY _CMAKE_${_name}_PURPOSE "${_SPP_PURPOSE}" )
-  endif()
-
-  # handle the TYPE
-  if(NOT _SPP_TYPE)
-    set(_SPP_TYPE OPTIONAL)
-  endif()
-
-  # List the supported types, according to their priority
-  set(validTypes "RUNTIME" "OPTIONAL" "RECOMMENDED" "REQUIRED" )
-  list(FIND validTypes ${_SPP_TYPE} _typeIndexInList)
-  if("${_typeIndexInList}" STREQUAL "-1" )
-    message(FATAL_ERROR "Bad package property type ${_SPP_TYPE} used in SET_PACKAGE_PROPERTIES(). "
-                        "Valid types are OPTIONAL, RECOMMENDED, REQUIRED and RUNTIME." )
-  endif()
-
-  get_property(_previousType  GLOBAL PROPERTY _CMAKE_${_name}_TYPE)
-  list(FIND validTypes "${_previousType}" _prevTypeIndexInList)
-
-  # make sure a previously set TYPE is not overridden with a lower new TYPE:
-  if("${_typeIndexInList}" GREATER "${_prevTypeIndexInList}")
-    set_property(GLOBAL PROPERTY _CMAKE_${_name}_TYPE "${_SPP_TYPE}" )
-  endif()
-
-endfunction()
-
-
-
-function(_FS_GET_FEATURE_SUMMARY _property _var _includeQuiet)
-
-  set(_type "ANY")
-  if("${_property}" MATCHES "REQUIRED_")
-    set(_type "REQUIRED")
-  elseif("${_property}" MATCHES "RECOMMENDED_")
-    set(_type "RECOMMENDED")
-  elseif("${_property}" MATCHES "RUNTIME_")
-    set(_type "RUNTIME")
-  elseif("${_property}" MATCHES "OPTIONAL_")
-    set(_type "OPTIONAL")
-  endif()
-
-  if("${_property}" MATCHES "PACKAGES_FOUND")
-    set(_property "PACKAGES_FOUND")
-  elseif("${_property}" MATCHES "PACKAGES_NOT_FOUND")
-    set(_property "PACKAGES_NOT_FOUND")
-  endif()
-
-
-  set(_currentFeatureText "")
-  get_property(_EnabledFeatures  GLOBAL PROPERTY ${_property})
-
-  foreach(_currentFeature ${_EnabledFeatures})
-
-    # does this package belong to the type we currently want to list ?
-    get_property(_currentType  GLOBAL PROPERTY _CMAKE_${_currentFeature}_TYPE)
-    if(NOT _currentType)
-      set(_currentType OPTIONAL)
-    endif()
-
-    if("${_type}" STREQUAL ANY  OR  "${_type}" STREQUAL "${_currentType}")
-
-      # check whether the current feature/package should be in the output depending on whether it was QUIET or not
-      set(includeThisOne TRUE)
-      # skip QUIET packages, except if they are REQUIRED or INCLUDE_QUIET_PACKAGES has been set
-      if((NOT "${_currentType}" STREQUAL "REQUIRED") AND NOT _includeQuiet)
-        get_property(_isQuiet  GLOBAL PROPERTY _CMAKE_${_currentFeature}_QUIET)
-        if(_isQuiet)
-          set(includeThisOne FALSE)
-        endif()
-      endif()
-      get_property(_isTransitiveDepend
-        GLOBAL PROPERTY _CMAKE_${_currentFeature}_TRANSITIVE_DEPENDENCY
-      )
-      if(_isTransitiveDepend)
-        set(includeThisOne FALSE)
-      endif()
-
-      if(includeThisOne)
-
-        set(_currentFeatureText "${_currentFeatureText}\n * ${_currentFeature}")
-        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_REQUIRED_VERSION)
-        if(_info)
-          set(_currentFeatureText "${_currentFeatureText} (required version ${_info})")
-        endif()
-        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_DESCRIPTION)
-        if(_info)
-          set(_currentFeatureText "${_currentFeatureText} , ${_info}")
-        endif()
-        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_URL)
-        if(_info)
-          set(_currentFeatureText "${_currentFeatureText} , <${_info}>")
-        endif()
-
-        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_PURPOSE)
-        foreach(_purpose ${_info})
-          set(_currentFeatureText "${_currentFeatureText}\n   ${_purpose}")
-        endforeach()
-
-      endif()
-
-    endif()
-
-  endforeach()
-  set(${_var} "${_currentFeatureText}" PARENT_SCOPE)
-endfunction()
-
-
-
-function(FEATURE_SUMMARY)
-# CMAKE_PARSE_ARGUMENTS(<prefix> <options> <one_value_keywords> <multi_value_keywords> args...)
-  set(options APPEND INCLUDE_QUIET_PACKAGES FATAL_ON_MISSING_REQUIRED_PACKAGES)
-  set(oneValueArgs FILENAME VAR DESCRIPTION)
-  set(multiValueArgs WHAT)
-
-  CMAKE_PARSE_ARGUMENTS(_FS "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${_FIRST_ARG} ${ARGN})
-
-  if(_FS_UNPARSED_ARGUMENTS)
-    message(FATAL_ERROR "Unknown keywords given to FEATURE_SUMMARY(): \"${_FS_UNPARSED_ARGUMENTS}\"")
-  endif()
-
-  if(NOT _FS_WHAT)
-    message(FATAL_ERROR "The call to FEATURE_SUMMARY() doesn't set the required WHAT argument.")
-  endif()
-
-  set(validWhatParts "ENABLED_FEATURES"
-                     "DISABLED_FEATURES"
-                     "PACKAGES_FOUND"
-                     "PACKAGES_NOT_FOUND"
-                     "OPTIONAL_PACKAGES_FOUND"
-                     "OPTIONAL_PACKAGES_NOT_FOUND"
-                     "RECOMMENDED_PACKAGES_FOUND"
-                     "RECOMMENDED_PACKAGES_NOT_FOUND"
-                     "REQUIRED_PACKAGES_FOUND"
-                     "REQUIRED_PACKAGES_NOT_FOUND"
-                     "RUNTIME_PACKAGES_FOUND"
-                     "RUNTIME_PACKAGES_NOT_FOUND")
-
-  list(FIND validWhatParts "${_FS_WHAT}" indexInList)
-  if(NOT "${indexInList}" STREQUAL "-1")
-    _FS_GET_FEATURE_SUMMARY( ${_FS_WHAT} _featureSummary ${_FS_INCLUDE_QUIET_PACKAGES} )
-    set(_fullText "${_FS_DESCRIPTION}${_featureSummary}\n")
-    if (("${_FS_WHAT}" STREQUAL "REQUIRED_PACKAGES_NOT_FOUND") AND _featureSummary)
-      set(requiredPackagesNotFound TRUE)
-    endif()
-
-  else()
-    if("${_FS_WHAT}" STREQUAL "ALL")
-
-      set(allWhatParts "ENABLED_FEATURES"
-                       "RUNTIME_PACKAGES_FOUND"
-                       "OPTIONAL_PACKAGES_FOUND"
-                       "RECOMMENDED_PACKAGES_FOUND"
-                       "REQUIRED_PACKAGES_FOUND"
-
-                       "DISABLED_FEATURES"
-                       "RUNTIME_PACKAGES_NOT_FOUND"
-                       "OPTIONAL_PACKAGES_NOT_FOUND"
-                       "RECOMMENDED_PACKAGES_NOT_FOUND"
-                       "REQUIRED_PACKAGES_NOT_FOUND"
-      )
-
-    else()
-      set(allWhatParts)
-      foreach(part ${_FS_WHAT})
-        list(FIND validWhatParts "${part}" indexInList)
-        if(NOT "${indexInList}" STREQUAL "-1")
-          list(APPEND allWhatParts "${part}")
-        else()
-          if("${part}" STREQUAL "ALL")
-            message(FATAL_ERROR "The WHAT argument of FEATURE_SUMMARY() contains ALL, which cannot be combined with other values.")
-          else()
-            message(FATAL_ERROR "The WHAT argument of FEATURE_SUMMARY() contains ${part}, which is not a valid value.")
-          endif()
-        endif()
-      endforeach()
-    endif()
-
-    set(title_ENABLED_FEATURES               "The following features have been enabled:")
-    set(title_DISABLED_FEATURES              "The following features have been disabled:")
-    set(title_PACKAGES_FOUND                 "The following packages have been found:")
-    set(title_PACKAGES_NOT_FOUND             "The following packages have not been found:")
-    set(title_OPTIONAL_PACKAGES_FOUND        "The following OPTIONAL packages have been found:")
-    set(title_OPTIONAL_PACKAGES_NOT_FOUND    "The following OPTIONAL packages have not been found:")
-    set(title_RECOMMENDED_PACKAGES_FOUND     "The following RECOMMENDED packages have been found:")
-    set(title_RECOMMENDED_PACKAGES_NOT_FOUND "The following RECOMMENDED packages have not been found:")
-    set(title_REQUIRED_PACKAGES_FOUND        "The following REQUIRED packages have been found:")
-    set(title_REQUIRED_PACKAGES_NOT_FOUND    "The following REQUIRED packages have not been found:")
-    set(title_RUNTIME_PACKAGES_FOUND         "The following RUNTIME packages have been found:")
-    set(title_RUNTIME_PACKAGES_NOT_FOUND     "The following RUNTIME packages have not been found:")
-
-    set(_fullText "${_FS_DESCRIPTION}")
-    foreach(part ${allWhatParts})
-      set(_tmp)
-      _FS_GET_FEATURE_SUMMARY( ${part} _tmp ${_FS_INCLUDE_QUIET_PACKAGES})
-      if(_tmp)
-        set(_fullText "${_fullText}\n-- ${title_${part}}\n${_tmp}\n")
-        if("${part}" STREQUAL "REQUIRED_PACKAGES_NOT_FOUND")
-          set(requiredPackagesNotFound TRUE)
-        endif()
-      endif()
-    endforeach()
-  endif()
-
-  if(_FS_FILENAME)
-    if(_FS_APPEND)
-      file(APPEND "${_FS_FILENAME}" "${_fullText}")
-    else()
-      file(WRITE  "${_FS_FILENAME}" "${_fullText}")
-    endif()
-
-  else()
-    if(NOT _FS_VAR)
-      message(STATUS "${_fullText}")
-    endif()
-  endif()
-
-  if(_FS_VAR)
-    set(${_FS_VAR} "${_fullText}" PARENT_SCOPE)
-  endif()
-
-  if(requiredPackagesNotFound  AND  _FS_FATAL_ON_MISSING_REQUIRED_PACKAGES)
-    message(FATAL_ERROR "feature_summary() Error: REQUIRED package(s) are missing, aborting CMake run.")
-  endif()
-
-endfunction()
-
-
-# The stuff below is only kept for compatibility
-
-function(SET_PACKAGE_INFO _name _desc)
-  set(_url "${ARGV2}")
-  set(_purpose "${ARGV3}")
-  set_property(GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION "${_desc}" )
-  if(NOT _url STREQUAL "")
-    set_property(GLOBAL PROPERTY _CMAKE_${_name}_URL "${_url}" )
-  endif()
-  if(NOT _purpose STREQUAL "")
-    set_property(GLOBAL APPEND PROPERTY _CMAKE_${_name}_PURPOSE "${_purpose}" )
-  endif()
-endfunction()
-
-
-
-function(SET_FEATURE_INFO)
-  SET_PACKAGE_INFO(${ARGN})
-endfunction()
-
-
-
-function(PRINT_ENABLED_FEATURES)
-  FEATURE_SUMMARY(WHAT ENABLED_FEATURES  DESCRIPTION "Enabled features:")
-endfunction()
-
-
-
-function(PRINT_DISABLED_FEATURES)
-  FEATURE_SUMMARY(WHAT DISABLED_FEATURES  DESCRIPTION "Disabled features:")
-endfunction()
diff --git a/share/cmake-3.2/Modules/FindBISON.cmake b/share/cmake-3.2/Modules/FindBISON.cmake
deleted file mode 100644
index ec3ee78..0000000
--- a/share/cmake-3.2/Modules/FindBISON.cmake
+++ /dev/null
@@ -1,196 +0,0 @@
-#.rst:
-# FindBISON
-# ---------
-#
-# Find bison executable and provides macros to generate custom build rules
-#
-# The module defines the following variables:
-#
-# ::
-#
-#   BISON_EXECUTABLE - path to the bison program
-#   BISON_VERSION - version of bison
-#   BISON_FOUND - true if the program was found
-#
-#
-#
-# The minimum required version of bison can be specified using the
-# standard CMake syntax, e.g.  find_package(BISON 2.1.3)
-#
-# If bison is found, the module defines the macros:
-#
-# ::
-#
-#   BISON_TARGET(<Name> <YaccInput> <CodeOutput> [VERBOSE <file>]
-#               [COMPILE_FLAGS <string>])
-#
-# which will create a custom rule to generate a parser.  <YaccInput> is
-# the path to a yacc file.  <CodeOutput> is the name of the source file
-# generated by bison.  A header file is also be generated, and contains
-# the token list.  If COMPILE_FLAGS option is specified, the next
-# parameter is added in the bison command line.  if VERBOSE option is
-# specified, <file> is created and contains verbose descriptions of the
-# grammar and parser.  The macro defines a set of variables:
-#
-# ::
-#
-#   BISON_${Name}_DEFINED - true is the macro ran successfully
-#   BISON_${Name}_INPUT - The input source file, an alias for <YaccInput>
-#   BISON_${Name}_OUTPUT_SOURCE - The source file generated by bison
-#   BISON_${Name}_OUTPUT_HEADER - The header file generated by bison
-#   BISON_${Name}_OUTPUTS - The sources files generated by bison
-#   BISON_${Name}_COMPILE_FLAGS - Options used in the bison command line
-#
-#
-#
-# ::
-#
-#   ====================================================================
-#   Example:
-#
-#
-#
-# ::
-#
-#    find_package(BISON)
-#    BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp)
-#    add_executable(Foo main.cpp ${BISON_MyParser_OUTPUTS})
-#   ====================================================================
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-# Copyright 2006 Tristan Carel
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-find_program(BISON_EXECUTABLE NAMES bison win_bison DOC "path to the bison executable")
-mark_as_advanced(BISON_EXECUTABLE)
-
-if(BISON_EXECUTABLE)
-  # the bison commands should be executed with the C locale, otherwise
-  # the message (which are parsed) may be translated
-  set(_Bison_SAVED_LC_ALL "$ENV{LC_ALL}")
-  set(ENV{LC_ALL} C)
-
-  execute_process(COMMAND ${BISON_EXECUTABLE} --version
-    OUTPUT_VARIABLE BISON_version_output
-    ERROR_VARIABLE BISON_version_error
-    RESULT_VARIABLE BISON_version_result
-    OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-  set(ENV{LC_ALL} ${_Bison_SAVED_LC_ALL})
-
-  if(NOT ${BISON_version_result} EQUAL 0)
-    message(SEND_ERROR "Command \"${BISON_EXECUTABLE} --version\" failed with output:\n${BISON_version_error}")
-  else()
-    # Bison++
-    if("${BISON_version_output}" MATCHES "^bison\\+\\+ Version ([^,]+)")
-      set(BISON_VERSION "${CMAKE_MATCH_1}")
-    # GNU Bison
-    elseif("${BISON_version_output}" MATCHES "^bison \\(GNU Bison\\) ([^\n]+)\n")
-      set(BISON_VERSION "${CMAKE_MATCH_1}")
-    elseif("${BISON_version_output}" MATCHES "^GNU Bison (version )?([^\n]+)")
-      set(BISON_VERSION "${CMAKE_MATCH_2}")
-    endif()
-  endif()
-
-  # internal macro
-  macro(BISON_TARGET_option_verbose Name BisonOutput filename)
-    list(APPEND BISON_TARGET_cmdopt "--verbose")
-    get_filename_component(BISON_TARGET_output_path "${BisonOutput}" PATH)
-    get_filename_component(BISON_TARGET_output_name "${BisonOutput}" NAME_WE)
-    add_custom_command(OUTPUT ${filename}
-      COMMAND ${CMAKE_COMMAND}
-      ARGS -E copy
-      "${BISON_TARGET_output_path}/${BISON_TARGET_output_name}.output"
-      "${filename}"
-      DEPENDS
-      "${BISON_TARGET_output_path}/${BISON_TARGET_output_name}.output"
-      COMMENT "[BISON][${Name}] Copying bison verbose table to ${filename}"
-      WORKING_DIRECTORY ${CMAKE_SOURCE_DIR})
-    set(BISON_${Name}_VERBOSE_FILE ${filename})
-    list(APPEND BISON_TARGET_extraoutputs
-      "${BISON_TARGET_output_path}/${BISON_TARGET_output_name}.output")
-  endmacro()
-
-  # internal macro
-  macro(BISON_TARGET_option_extraopts Options)
-    set(BISON_TARGET_extraopts "${Options}")
-    separate_arguments(BISON_TARGET_extraopts)
-    list(APPEND BISON_TARGET_cmdopt ${BISON_TARGET_extraopts})
-  endmacro()
-
-  #============================================================
-  # BISON_TARGET (public macro)
-  #============================================================
-  #
-  macro(BISON_TARGET Name BisonInput BisonOutput)
-    set(BISON_TARGET_output_header "")
-    set(BISON_TARGET_cmdopt "")
-    set(BISON_TARGET_outputs "${BisonOutput}")
-    if(NOT ${ARGC} EQUAL 3 AND NOT ${ARGC} EQUAL 5 AND NOT ${ARGC} EQUAL 7)
-      message(SEND_ERROR "Usage")
-    else()
-      # Parsing parameters
-      if(${ARGC} GREATER 5 OR ${ARGC} EQUAL 5)
-        if("${ARGV3}" STREQUAL "VERBOSE")
-          BISON_TARGET_option_verbose(${Name} ${BisonOutput} "${ARGV4}")
-        endif()
-        if("${ARGV3}" STREQUAL "COMPILE_FLAGS")
-          BISON_TARGET_option_extraopts("${ARGV4}")
-        endif()
-      endif()
-
-      if(${ARGC} EQUAL 7)
-        if("${ARGV5}" STREQUAL "VERBOSE")
-          BISON_TARGET_option_verbose(${Name} ${BisonOutput} "${ARGV6}")
-        endif()
-
-        if("${ARGV5}" STREQUAL "COMPILE_FLAGS")
-          BISON_TARGET_option_extraopts("${ARGV6}")
-        endif()
-      endif()
-
-      # Header's name generated by bison (see option -d)
-      list(APPEND BISON_TARGET_cmdopt "-d")
-      string(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\2" _fileext "${ARGV2}")
-      string(REPLACE "c" "h" _fileext ${_fileext})
-      string(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\1${_fileext}"
-          BISON_${Name}_OUTPUT_HEADER "${ARGV2}")
-      list(APPEND BISON_TARGET_outputs "${BISON_${Name}_OUTPUT_HEADER}")
-
-      add_custom_command(OUTPUT ${BISON_TARGET_outputs}
-        ${BISON_TARGET_extraoutputs}
-        COMMAND ${BISON_EXECUTABLE}
-        ARGS ${BISON_TARGET_cmdopt} -o ${ARGV2} ${ARGV1}
-        DEPENDS ${ARGV1}
-        COMMENT "[BISON][${Name}] Building parser with bison ${BISON_VERSION}"
-        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
-
-      # define target variables
-      set(BISON_${Name}_DEFINED TRUE)
-      set(BISON_${Name}_INPUT ${ARGV1})
-      set(BISON_${Name}_OUTPUTS ${BISON_TARGET_outputs})
-      set(BISON_${Name}_COMPILE_FLAGS ${BISON_TARGET_cmdopt})
-      set(BISON_${Name}_OUTPUT_SOURCE "${BisonOutput}")
-
-    endif()
-  endmacro()
-  #
-  #============================================================
-
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(BISON REQUIRED_VARS  BISON_EXECUTABLE
-                                        VERSION_VAR BISON_VERSION)
-
-# FindBISON.cmake ends here
diff --git a/share/cmake-3.2/Modules/FindBLAS.cmake b/share/cmake-3.2/Modules/FindBLAS.cmake
deleted file mode 100644
index 6a583d9..0000000
--- a/share/cmake-3.2/Modules/FindBLAS.cmake
+++ /dev/null
@@ -1,694 +0,0 @@
-#.rst:
-# FindBLAS
-# --------
-#
-# Find BLAS library
-#
-# This module finds an installed fortran library that implements the
-# BLAS linear-algebra interface (see http://www.netlib.org/blas/).  The
-# list of libraries searched for is taken from the autoconf macro file,
-# acx_blas.m4 (distributed at
-# http://ac-archive.sourceforge.net/ac-archive/acx_blas.html).
-#
-# This module sets the following variables:
-#
-# ::
-#
-#   BLAS_FOUND - set to true if a library implementing the BLAS interface
-#     is found
-#   BLAS_LINKER_FLAGS - uncached list of required linker flags (excluding -l
-#     and -L).
-#   BLAS_LIBRARIES - uncached list of libraries (using full path name) to
-#     link against to use BLAS
-#   BLAS95_LIBRARIES - uncached list of libraries (using full path name)
-#     to link against to use BLAS95 interface
-#   BLAS95_FOUND - set to true if a library implementing the BLAS f95 interface
-#     is found
-#   BLA_STATIC  if set on this determines what kind of linkage we do (static)
-#   BLA_VENDOR  if set checks only the specified vendor, if not set checks
-#      all the possibilities
-#   BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
-#
-# ######### ## List of vendors (BLA_VENDOR) valid in this module #
-# Goto,ATLAS PhiPACK,CXML,DXML,SunPerf,SCSL,SGIMATH,IBMESSL,Intel10_32
-# (intel mkl v10 32 bit),Intel10_64lp (intel mkl v10 64 bit,lp thread
-# model, lp64 model), # Intel10_64lp_seq (intel mkl v10 64
-# bit,sequential code, lp64 model), # Intel( older versions of mkl 32
-# and 64 bit), ACML,ACML_MP,ACML_GPU,Apple, NAS, Generic C/CXX should be
-# enabled to use Intel mkl
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(${CMAKE_CURRENT_LIST_DIR}/CheckFunctionExists.cmake)
-include(${CMAKE_CURRENT_LIST_DIR}/CheckFortranFunctionExists.cmake)
-include(${CMAKE_CURRENT_LIST_DIR}/CMakePushCheckState.cmake)
-cmake_push_check_state()
-set(CMAKE_REQUIRED_QUIET ${BLAS_FIND_QUIETLY})
-
-set(_blas_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-
-# Check the language being used
-get_property( _LANGUAGES_ GLOBAL PROPERTY ENABLED_LANGUAGES )
-if( _LANGUAGES_ MATCHES Fortran )
-  set( _CHECK_FORTRAN TRUE )
-elseif( (_LANGUAGES_ MATCHES C) OR (_LANGUAGES_ MATCHES CXX) )
-  set( _CHECK_FORTRAN FALSE )
-else()
-  if(BLAS_FIND_REQUIRED)
-    message(FATAL_ERROR "FindBLAS requires Fortran, C, or C++ to be enabled.")
-  else()
-    message(STATUS "Looking for BLAS... - NOT found (Unsupported languages)")
-    return()
-  endif()
-endif()
-
-macro(Check_Fortran_Libraries LIBRARIES _prefix _name _flags _list _thread)
-# This macro checks for the existence of the combination of fortran libraries
-# given by _list.  If the combination is found, this macro checks (using the
-# Check_Fortran_Function_Exists macro) whether can link against that library
-# combination using the name of a routine given by _name using the linker
-# flags given by _flags.  If the combination of libraries is found and passes
-# the link test, LIBRARIES is set to the list of complete library paths that
-# have been found.  Otherwise, LIBRARIES is set to FALSE.
-
-# N.B. _prefix is the prefix applied to the names of all cached variables that
-# are generated internally and marked advanced by this macro.
-
-set(_libdir ${ARGN})
-
-set(_libraries_work TRUE)
-set(${LIBRARIES})
-set(_combined_name)
-if (NOT _libdir)
-  if (WIN32)
-    set(_libdir ENV LIB)
-  elseif (APPLE)
-    set(_libdir ENV DYLD_LIBRARY_PATH)
-  else ()
-    set(_libdir ENV LD_LIBRARY_PATH)
-  endif ()
-endif ()
-
-foreach(_library ${_list})
-  set(_combined_name ${_combined_name}_${_library})
-
-  if(_libraries_work)
-    if (BLA_STATIC)
-      if (WIN32)
-        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
-      endif ()
-      if (APPLE)
-        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
-      else ()
-        set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
-      endif ()
-    else ()
-      if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
-        # for ubuntu's libblas3gf and liblapack3gf packages
-        set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES} .so.3gf)
-      endif ()
-    endif ()
-    find_library(${_prefix}_${_library}_LIBRARY
-      NAMES ${_library}
-      PATHS ${_libdir}
-      )
-    mark_as_advanced(${_prefix}_${_library}_LIBRARY)
-    set(${LIBRARIES} ${${LIBRARIES}} ${${_prefix}_${_library}_LIBRARY})
-    set(_libraries_work ${${_prefix}_${_library}_LIBRARY})
-  endif()
-endforeach()
-if(_libraries_work)
-  # Test this combination of libraries.
-  set(CMAKE_REQUIRED_LIBRARIES ${_flags} ${${LIBRARIES}} ${_thread})
-#  message("DEBUG: CMAKE_REQUIRED_LIBRARIES = ${CMAKE_REQUIRED_LIBRARIES}")
-  if (_CHECK_FORTRAN)
-    check_fortran_function_exists("${_name}" ${_prefix}${_combined_name}_WORKS)
-  else()
-    check_function_exists("${_name}_" ${_prefix}${_combined_name}_WORKS)
-  endif()
-  set(CMAKE_REQUIRED_LIBRARIES)
-  mark_as_advanced(${_prefix}${_combined_name}_WORKS)
-  set(_libraries_work ${${_prefix}${_combined_name}_WORKS})
-endif()
-if(NOT _libraries_work)
-  set(${LIBRARIES} FALSE)
-endif()
-#message("DEBUG: ${LIBRARIES} = ${${LIBRARIES}}")
-endmacro()
-
-set(BLAS_LINKER_FLAGS)
-set(BLAS_LIBRARIES)
-set(BLAS95_LIBRARIES)
-if (NOT $ENV{BLA_VENDOR} STREQUAL "")
-  set(BLA_VENDOR $ENV{BLA_VENDOR})
-else ()
-  if(NOT BLA_VENDOR)
-    set(BLA_VENDOR "All")
-  endif()
-endif ()
-
-if (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  # gotoblas (http://www.tacc.utexas.edu/tacc-projects/gotoblas2)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "goto2"
-  ""
-  )
- endif()
-endif ()
-
-if (BLA_VENDOR STREQUAL "ATLAS" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  # BLAS in ATLAS library? (http://math-atlas.sourceforge.net/)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  dgemm
-  ""
-  "f77blas;atlas"
-  ""
-  )
- endif()
-endif ()
-
-# BLAS in PhiPACK libraries? (requires generic BLAS lib, too)
-if (BLA_VENDOR STREQUAL "PhiPACK" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "sgemm;dgemm;blas"
-  ""
-  )
- endif()
-endif ()
-
-# BLAS in Alpha CXML library?
-if (BLA_VENDOR STREQUAL "CXML" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "cxml"
-  ""
-  )
- endif()
-endif ()
-
-# BLAS in Alpha DXML library? (now called CXML, see above)
-if (BLA_VENDOR STREQUAL "DXML" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "dxml"
-  ""
-  )
- endif()
-endif ()
-
-# BLAS in Sun Performance library?
-if (BLA_VENDOR STREQUAL "SunPerf" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  "-xlic_lib=sunperf"
-  "sunperf;sunmath"
-  ""
-  )
-  if(BLAS_LIBRARIES)
-    set(BLAS_LINKER_FLAGS "-xlic_lib=sunperf")
-  endif()
- endif()
-endif ()
-
-# BLAS in SCSL library?  (SGI/Cray Scientific Library)
-if (BLA_VENDOR STREQUAL "SCSL" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "scsl"
-  ""
-  )
- endif()
-endif ()
-
-# BLAS in SGIMATH library?
-if (BLA_VENDOR STREQUAL "SGIMATH" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "complib.sgimath"
-  ""
-  )
- endif()
-endif ()
-
-# BLAS in IBM ESSL library? (requires generic BLAS lib, too)
-if (BLA_VENDOR STREQUAL "IBMESSL" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "essl;blas"
-  ""
-  )
- endif()
-endif ()
-
-#BLAS in acml library?
-if (BLA_VENDOR MATCHES "ACML" OR BLA_VENDOR STREQUAL "All")
- if( ((BLA_VENDOR STREQUAL "ACML") AND (NOT BLAS_ACML_LIB_DIRS)) OR
-     ((BLA_VENDOR STREQUAL "ACML_MP") AND (NOT BLAS_ACML_MP_LIB_DIRS)) OR
-     ((BLA_VENDOR STREQUAL "ACML_GPU") AND (NOT BLAS_ACML_GPU_LIB_DIRS))
-   )
-   # try to find acml in "standard" paths
-   if( WIN32 )
-    file( GLOB _ACML_ROOT "C:/AMD/acml*/ACML-EULA.txt" )
-   else()
-    file( GLOB _ACML_ROOT "/opt/acml*/ACML-EULA.txt" )
-   endif()
-   if( WIN32 )
-    file( GLOB _ACML_GPU_ROOT "C:/AMD/acml*/GPGPUexamples" )
-   else()
-    file( GLOB _ACML_GPU_ROOT "/opt/acml*/GPGPUexamples" )
-   endif()
-   list(GET _ACML_ROOT 0 _ACML_ROOT)
-   list(GET _ACML_GPU_ROOT 0 _ACML_GPU_ROOT)
-   if( _ACML_ROOT )
-    get_filename_component( _ACML_ROOT ${_ACML_ROOT} PATH )
-    if( SIZEOF_INTEGER EQUAL 8 )
-     set( _ACML_PATH_SUFFIX "_int64" )
-    else()
-    set( _ACML_PATH_SUFFIX "" )
-   endif()
-   if( CMAKE_Fortran_COMPILER_ID STREQUAL "Intel" )
-    set( _ACML_COMPILER32 "ifort32" )
-    set( _ACML_COMPILER64 "ifort64" )
-   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "SunPro" )
-    set( _ACML_COMPILER32 "sun32" )
-    set( _ACML_COMPILER64 "sun64" )
-   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "PGI" )
-    set( _ACML_COMPILER32 "pgi32" )
-    if( WIN32 )
-     set( _ACML_COMPILER64 "win64" )
-    else()
-     set( _ACML_COMPILER64 "pgi64" )
-    endif()
-   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "Open64" )
-    # 32 bit builds not supported on Open64 but for code simplicity
-    # We'll just use the same directory twice
-    set( _ACML_COMPILER32 "open64_64" )
-    set( _ACML_COMPILER64 "open64_64" )
-   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "NAG" )
-    set( _ACML_COMPILER32 "nag32" )
-    set( _ACML_COMPILER64 "nag64" )
-   else()
-    set( _ACML_COMPILER32 "gfortran32" )
-    set( _ACML_COMPILER64 "gfortran64" )
-   endif()
-
-   if( BLA_VENDOR STREQUAL "ACML_MP" )
-    set(_ACML_MP_LIB_DIRS
-     "${_ACML_ROOT}/${_ACML_COMPILER32}_mp${_ACML_PATH_SUFFIX}/lib"
-     "${_ACML_ROOT}/${_ACML_COMPILER64}_mp${_ACML_PATH_SUFFIX}/lib" )
-   else()
-    set(_ACML_LIB_DIRS
-     "${_ACML_ROOT}/${_ACML_COMPILER32}${_ACML_PATH_SUFFIX}/lib"
-     "${_ACML_ROOT}/${_ACML_COMPILER64}${_ACML_PATH_SUFFIX}/lib" )
-   endif()
-  endif()
- elseif(BLAS_${BLA_VENDOR}_LIB_DIRS)
-   set(_${BLA_VENDOR}_LIB_DIRS ${BLAS_${BLA_VENDOR}_LIB_DIRS})
- endif()
-
- if( BLA_VENDOR STREQUAL "ACML_MP" )
-  foreach( BLAS_ACML_MP_LIB_DIRS ${_ACML_MP_LIB_DIRS})
-   check_fortran_libraries (
-     BLAS_LIBRARIES
-     BLAS
-     sgemm
-     "" "acml_mp;acml_mv" "" ${BLAS_ACML_MP_LIB_DIRS}
-   )
-   if( BLAS_LIBRARIES )
-    break()
-   endif()
-  endforeach()
- elseif( BLA_VENDOR STREQUAL "ACML_GPU" )
-  foreach( BLAS_ACML_GPU_LIB_DIRS ${_ACML_GPU_LIB_DIRS})
-   check_fortran_libraries (
-     BLAS_LIBRARIES
-     BLAS
-     sgemm
-     "" "acml;acml_mv;CALBLAS" "" ${BLAS_ACML_GPU_LIB_DIRS}
-   )
-   if( BLAS_LIBRARIES )
-    break()
-   endif()
-  endforeach()
- else()
-  foreach( BLAS_ACML_LIB_DIRS ${_ACML_LIB_DIRS} )
-   check_fortran_libraries (
-     BLAS_LIBRARIES
-     BLAS
-     sgemm
-     "" "acml;acml_mv" "" ${BLAS_ACML_LIB_DIRS}
-   )
-   if( BLAS_LIBRARIES )
-    break()
-   endif()
-  endforeach()
- endif()
-
- # Either acml or acml_mp should be in LD_LIBRARY_PATH but not both
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "acml;acml_mv"
-  ""
-  )
- endif()
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "acml_mp;acml_mv"
-  ""
-  )
- endif()
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "acml;acml_mv;CALBLAS"
-  ""
-  )
- endif()
-endif () # ACML
-
-# Apple BLAS library?
-if (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
-if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  dgemm
-  ""
-  "Accelerate"
-  ""
-  )
- endif()
-endif ()
-
-if (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
- if ( NOT BLAS_LIBRARIES )
-    check_fortran_libraries(
-    BLAS_LIBRARIES
-    BLAS
-    dgemm
-    ""
-    "vecLib"
-    ""
-    )
- endif ()
-endif ()
-# Generic BLAS library?
-if (BLA_VENDOR STREQUAL "Generic" OR BLA_VENDOR STREQUAL "All")
- if(NOT BLAS_LIBRARIES)
-  check_fortran_libraries(
-  BLAS_LIBRARIES
-  BLAS
-  sgemm
-  ""
-  "blas"
-  ""
-  )
- endif()
-endif ()
-
-#BLAS in intel mkl 10 library? (em64t 64bit)
-if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All")
- if (NOT WIN32)
-  set(LM "-lm")
- endif ()
- if (_LANGUAGES_ MATCHES C OR _LANGUAGES_ MATCHES CXX)
-  if(BLAS_FIND_QUIETLY OR NOT BLAS_FIND_REQUIRED)
-    find_package(Threads)
-  else()
-    find_package(Threads REQUIRED)
-  endif()
-
-  set(BLAS_SEARCH_LIBS "")
-
-  if(BLA_F95)
-    set(BLAS_mkl_SEARCH_SYMBOL SGEMM)
-    set(_LIBRARIES BLAS95_LIBRARIES)
-    if (WIN32)
-      if (BLA_STATIC)
-        set(BLAS_mkl_DLL_SUFFIX "")
-      else()
-        set(BLAS_mkl_DLL_SUFFIX "_dll")
-      endif()
-
-      # Find the main file (32-bit or 64-bit)
-      set(BLAS_SEARCH_LIBS_WIN_MAIN "")
-      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
-          "mkl_blas95${BLAS_mkl_DLL_SUFFIX} mkl_intel_c${BLAS_mkl_DLL_SUFFIX}")
-      endif()
-      if (BLA_VENDOR STREQUAL "Intel10_64lp*" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
-          "mkl_blas95_lp64${BLAS_mkl_DLL_SUFFIX} mkl_intel_lp64${BLAS_mkl_DLL_SUFFIX}")
-      endif ()
-
-      # Add threading/sequential libs
-      set(BLAS_SEARCH_LIBS_WIN_THREAD "")
-      if (BLA_VENDOR STREQUAL "*_seq" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
-          "mkl_sequential${BLAS_mkl_DLL_SUFFIX}")
-      endif()
-      if (NOT BLA_VENDOR STREQUAL "*_seq" OR BLA_VENDOR STREQUAL "All")
-        # old version
-        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
-          "libguide40 mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
-        # mkl >= 10.3
-        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
-          "libiomp5md mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
-      endif()
-
-      # Cartesian product of the above
-      foreach (MAIN ${BLAS_SEARCH_LIBS_WIN_MAIN})
-        foreach (THREAD ${BLAS_SEARCH_LIBS_WIN_THREAD})
-          list(APPEND BLAS_SEARCH_LIBS
-            "${MAIN} ${THREAD} mkl_core${BLAS_mkl_DLL_SUFFIX}")
-        endforeach()
-      endforeach()
-    else ()
-      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_blas95 mkl_intel mkl_intel_thread mkl_core guide")
-      endif ()
-      if (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
-        # old version
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_blas95 mkl_intel_lp64 mkl_intel_thread mkl_core guide")
-
-        # mkl >= 10.3
-        if (CMAKE_C_COMPILER MATCHES ".+gcc")
-          list(APPEND BLAS_SEARCH_LIBS
-            "mkl_blas95_lp64 mkl_intel_lp64 mkl_gnu_thread mkl_core gomp")
-        else ()
-          list(APPEND BLAS_SEARCH_LIBS
-            "mkl_blas95_lp64 mkl_intel_lp64 mkl_intel_thread mkl_core iomp5")
-        endif ()
-      endif ()
-      if (BLA_VENDOR STREQUAL "Intel10_64lp_seq" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_intel_lp64 mkl_sequential mkl_core")
-      endif ()
-    endif ()
-  else ()
-    set(BLAS_mkl_SEARCH_SYMBOL sgemm)
-    set(_LIBRARIES BLAS_LIBRARIES)
-    if (WIN32)
-      if (BLA_STATIC)
-        set(BLAS_mkl_DLL_SUFFIX "")
-      else()
-        set(BLAS_mkl_DLL_SUFFIX "_dll")
-      endif()
-
-      # Find the main file (32-bit or 64-bit)
-      set(BLAS_SEARCH_LIBS_WIN_MAIN "")
-      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
-          "mkl_intel_c${BLAS_mkl_DLL_SUFFIX}")
-      endif()
-      if (BLA_VENDOR STREQUAL "Intel10_64lp*" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
-          "mkl_intel_lp64${BLAS_mkl_DLL_SUFFIX}")
-      endif ()
-
-      # Add threading/sequential libs
-      set(BLAS_SEARCH_LIBS_WIN_THREAD "")
-      if (NOT BLA_VENDOR STREQUAL "*_seq" OR BLA_VENDOR STREQUAL "All")
-        # old version
-        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
-          "libguide40 mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
-        # mkl >= 10.3
-        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
-          "libiomp5md mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
-      endif()
-      if (BLA_VENDOR STREQUAL "*_seq" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
-          "mkl_sequential${BLAS_mkl_DLL_SUFFIX}")
-      endif()
-
-      # Cartesian product of the above
-      foreach (MAIN ${BLAS_SEARCH_LIBS_WIN_MAIN})
-        foreach (THREAD ${BLAS_SEARCH_LIBS_WIN_THREAD})
-          list(APPEND BLAS_SEARCH_LIBS
-            "${MAIN} ${THREAD} mkl_core${BLAS_mkl_DLL_SUFFIX}")
-        endforeach()
-      endforeach()
-    else ()
-      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_intel mkl_intel_thread mkl_core guide")
-      endif ()
-      if (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
-
-        # old version
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_intel_lp64 mkl_intel_thread mkl_core guide")
-
-        # mkl >= 10.3
-        if (CMAKE_C_COMPILER MATCHES ".+gcc")
-          list(APPEND BLAS_SEARCH_LIBS
-            "mkl_intel_lp64 mkl_gnu_thread mkl_core gomp")
-        else ()
-          list(APPEND BLAS_SEARCH_LIBS
-            "mkl_intel_lp64 mkl_intel_thread mkl_core iomp5")
-        endif ()
-      endif ()
-      if (BLA_VENDOR STREQUAL "Intel10_64lp_seq" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_intel_lp64 mkl_sequential mkl_core")
-      endif ()
-
-      #older vesions of intel mkl libs
-      if (BLA_VENDOR STREQUAL "Intel" OR BLA_VENDOR STREQUAL "All")
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl")
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_ia32")
-        list(APPEND BLAS_SEARCH_LIBS
-          "mkl_em64t")
-      endif ()
-    endif ()
-  endif ()
-
-  foreach (IT ${BLAS_SEARCH_LIBS})
-    string(REPLACE " " ";" SEARCH_LIBS ${IT})
-    if (${_LIBRARIES})
-    else ()
-      check_fortran_libraries(
-        ${_LIBRARIES}
-        BLAS
-        ${BLAS_mkl_SEARCH_SYMBOL}
-        ""
-        "${SEARCH_LIBS}"
-        "${CMAKE_THREAD_LIBS_INIT};${LM}"
-        )
-    endif ()
-  endforeach ()
-
- endif ()
-endif ()
-
-
-if(BLA_F95)
- if(BLAS95_LIBRARIES)
-    set(BLAS95_FOUND TRUE)
-  else()
-    set(BLAS95_FOUND FALSE)
-  endif()
-
-  if(NOT BLAS_FIND_QUIETLY)
-    if(BLAS95_FOUND)
-      message(STATUS "A library with BLAS95 API found.")
-    else()
-      if(BLAS_FIND_REQUIRED)
-        message(FATAL_ERROR
-        "A required library with BLAS95 API not found. Please specify library location.")
-      else()
-        message(STATUS
-        "A library with BLAS95 API not found. Please specify library location.")
-      endif()
-    endif()
-  endif()
-  set(BLAS_FOUND TRUE)
-  set(BLAS_LIBRARIES "${BLAS95_LIBRARIES}")
-else()
-  if(BLAS_LIBRARIES)
-    set(BLAS_FOUND TRUE)
-  else()
-    set(BLAS_FOUND FALSE)
-  endif()
-
-  if(NOT BLAS_FIND_QUIETLY)
-    if(BLAS_FOUND)
-      message(STATUS "A library with BLAS API found.")
-    else()
-      if(BLAS_FIND_REQUIRED)
-        message(FATAL_ERROR
-        "A required library with BLAS API not found. Please specify library location."
-        )
-      else()
-        message(STATUS
-        "A library with BLAS API not found. Please specify library location."
-        )
-      endif()
-    endif()
-  endif()
-endif()
-
-cmake_pop_check_state()
-set(CMAKE_FIND_LIBRARY_SUFFIXES ${_blas_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
diff --git a/share/cmake-3.2/Modules/FindBZip2.cmake b/share/cmake-3.2/Modules/FindBZip2.cmake
deleted file mode 100644
index b479332..0000000
--- a/share/cmake-3.2/Modules/FindBZip2.cmake
+++ /dev/null
@@ -1,67 +0,0 @@
-#.rst:
-# FindBZip2
-# ---------
-#
-# Try to find BZip2
-#
-# Once done this will define
-#
-# ::
-#
-#   BZIP2_FOUND - system has BZip2
-#   BZIP2_INCLUDE_DIR - the BZip2 include directory
-#   BZIP2_LIBRARIES - Link these to use BZip2
-#   BZIP2_NEED_PREFIX - this is set if the functions are prefixed with BZ2_
-#   BZIP2_VERSION_STRING - the version of BZip2 found (since CMake 2.8.8)
-
-#=============================================================================
-# Copyright 2006-2012 Kitware, Inc.
-# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
-# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(_BZIP2_PATHS PATHS
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\Bzip2;InstallPath]"
-  )
-
-find_path(BZIP2_INCLUDE_DIR bzlib.h ${_BZIP2_PATHS} PATH_SUFFIXES include)
-
-if (NOT BZIP2_LIBRARIES)
-    find_library(BZIP2_LIBRARY_RELEASE NAMES bz2 bzip2 ${_BZIP2_PATHS} PATH_SUFFIXES lib)
-    find_library(BZIP2_LIBRARY_DEBUG NAMES bzip2d ${_BZIP2_PATHS} PATH_SUFFIXES lib)
-
-    include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
-    SELECT_LIBRARY_CONFIGURATIONS(BZIP2)
-endif ()
-
-if (BZIP2_INCLUDE_DIR AND EXISTS "${BZIP2_INCLUDE_DIR}/bzlib.h")
-    file(STRINGS "${BZIP2_INCLUDE_DIR}/bzlib.h" BZLIB_H REGEX "bzip2/libbzip2 version [0-9]+\\.[^ ]+ of [0-9]+ ")
-    string(REGEX REPLACE ".* bzip2/libbzip2 version ([0-9]+\\.[^ ]+) of [0-9]+ .*" "\\1" BZIP2_VERSION_STRING "${BZLIB_H}")
-endif ()
-
-# handle the QUIETLY and REQUIRED arguments and set BZip2_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(BZip2
-                                  REQUIRED_VARS BZIP2_LIBRARIES BZIP2_INCLUDE_DIR
-                                  VERSION_VAR BZIP2_VERSION_STRING)
-
-if (BZIP2_FOUND)
-   include(${CMAKE_CURRENT_LIST_DIR}/CheckLibraryExists.cmake)
-   include(${CMAKE_CURRENT_LIST_DIR}/CMakePushCheckState.cmake)
-   cmake_push_check_state()
-   set(CMAKE_REQUIRED_QUIET ${BZip2_FIND_QUIETLY})
-   CHECK_LIBRARY_EXISTS("${BZIP2_LIBRARIES}" BZ2_bzCompressInit "" BZIP2_NEED_PREFIX)
-   cmake_pop_check_state()
-endif ()
-
-mark_as_advanced(BZIP2_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindBoost.cmake b/share/cmake-3.2/Modules/FindBoost.cmake
deleted file mode 100644
index 99293c1..0000000
--- a/share/cmake-3.2/Modules/FindBoost.cmake
+++ /dev/null
@@ -1,1233 +0,0 @@
-#.rst:
-# FindBoost
-# ---------
-#
-# Find Boost include dirs and libraries
-#
-# Use this module by invoking find_package with the form::
-#
-#   find_package(Boost
-#     [version] [EXACT]      # Minimum or EXACT version e.g. 1.36.0
-#     [REQUIRED]             # Fail with error if Boost is not found
-#     [COMPONENTS <libs>...] # Boost libraries by their canonical name
-#     )                      # e.g. "date_time" for "libboost_date_time"
-#
-# This module finds headers and requested component libraries OR a CMake
-# package configuration file provided by a "Boost CMake" build.  For the
-# latter case skip to the "Boost CMake" section below.  For the former
-# case results are reported in variables::
-#
-#   Boost_FOUND            - True if headers and requested libraries were found
-#   Boost_INCLUDE_DIRS     - Boost include directories
-#   Boost_LIBRARY_DIRS     - Link directories for Boost libraries
-#   Boost_LIBRARIES        - Boost component libraries to be linked
-#   Boost_<C>_FOUND        - True if component <C> was found (<C> is upper-case)
-#   Boost_<C>_LIBRARY      - Libraries to link for component <C> (may include
-#                            target_link_libraries debug/optimized keywords)
-#   Boost_VERSION          - BOOST_VERSION value from boost/version.hpp
-#   Boost_LIB_VERSION      - Version string appended to library filenames
-#   Boost_MAJOR_VERSION    - Boost major version number (X in X.y.z)
-#   Boost_MINOR_VERSION    - Boost minor version number (Y in x.Y.z)
-#   Boost_SUBMINOR_VERSION - Boost subminor version number (Z in x.y.Z)
-#   Boost_LIB_DIAGNOSTIC_DEFINITIONS (Windows)
-#                          - Pass to add_definitions() to have diagnostic
-#                            information about Boost's automatic linking
-#                            displayed during compilation
-#
-# This module reads hints about search locations from variables::
-#
-#   BOOST_ROOT             - Preferred installation prefix
-#    (or BOOSTROOT)
-#   BOOST_INCLUDEDIR       - Preferred include directory e.g. <prefix>/include
-#   BOOST_LIBRARYDIR       - Preferred library directory e.g. <prefix>/lib
-#   Boost_NO_SYSTEM_PATHS  - Set to ON to disable searching in locations not
-#                            specified by these hint variables. Default is OFF.
-#   Boost_ADDITIONAL_VERSIONS
-#                          - List of Boost versions not known to this module
-#                            (Boost install locations may contain the version)
-#
-# and saves search results persistently in CMake cache entries::
-#
-#   Boost_INCLUDE_DIR         - Directory containing Boost headers
-#   Boost_LIBRARY_DIR         - Directory containing Boost libraries
-#   Boost_<C>_LIBRARY_DEBUG   - Component <C> library debug variant
-#   Boost_<C>_LIBRARY_RELEASE - Component <C> library release variant
-#
-# Users may set these hints or results as cache entries.  Projects
-# should not read these entries directly but instead use the above
-# result variables.  Note that some hint names start in upper-case
-# "BOOST".  One may specify these as environment variables if they are
-# not specified as CMake variables or cache entries.
-#
-# This module first searches for the Boost header files using the above
-# hint variables (excluding BOOST_LIBRARYDIR) and saves the result in
-# Boost_INCLUDE_DIR.  Then it searches for requested component libraries
-# using the above hints (excluding BOOST_INCLUDEDIR and
-# Boost_ADDITIONAL_VERSIONS), "lib" directories near Boost_INCLUDE_DIR,
-# and the library name configuration settings below.  It saves the
-# library directory in Boost_LIBRARY_DIR and individual library
-# locations in Boost_<C>_LIBRARY_DEBUG and Boost_<C>_LIBRARY_RELEASE.
-# When one changes settings used by previous searches in the same build
-# tree (excluding environment variables) this module discards previous
-# search results affected by the changes and searches again.
-#
-# Boost libraries come in many variants encoded in their file name.
-# Users or projects may tell this module which variant to find by
-# setting variables::
-#
-#   Boost_USE_MULTITHREADED  - Set to OFF to use the non-multithreaded
-#                              libraries ('mt' tag).  Default is ON.
-#   Boost_USE_STATIC_LIBS    - Set to ON to force the use of the static
-#                              libraries.  Default is OFF.
-#   Boost_USE_STATIC_RUNTIME - Set to ON or OFF to specify whether to use
-#                              libraries linked statically to the C++ runtime
-#                              ('s' tag).  Default is platform dependent.
-#   Boost_USE_DEBUG_RUNTIME  - Set to ON or OFF to specify whether to use
-#                              libraries linked to the MS debug C++ runtime
-#                              ('g' tag).  Default is ON.
-#   Boost_USE_DEBUG_PYTHON   - Set to ON to use libraries compiled with a
-#                              debug Python build ('y' tag). Default is OFF.
-#   Boost_USE_STLPORT        - Set to ON to use libraries compiled with
-#                              STLPort ('p' tag).  Default is OFF.
-#   Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
-#                            - Set to ON to use libraries compiled with
-#                              STLPort deprecated "native iostreams"
-#                              ('n' tag).  Default is OFF.
-#   Boost_COMPILER           - Set to the compiler-specific library suffix
-#                              (e.g. "-gcc43").  Default is auto-computed
-#                              for the C++ compiler in use.
-#   Boost_THREADAPI          - Suffix for "thread" component library name,
-#                              such as "pthread" or "win32".  Names with
-#                              and without this suffix will both be tried.
-#   Boost_NAMESPACE          - Alternate namespace used to build boost with
-#                              e.g. if set to "myboost", will search for
-#                              myboost_thread instead of boost_thread.
-#
-# Other variables one may set to control this module are::
-#
-#   Boost_DEBUG              - Set to ON to enable debug output from FindBoost.
-#                              Please enable this before filing any bug report.
-#   Boost_DETAILED_FAILURE_MSG
-#                            - Set to ON to add detailed information to the
-#                              failure message even when the REQUIRED option
-#                              is not given to the find_package call.
-#   Boost_REALPATH           - Set to ON to resolve symlinks for discovered
-#                              libraries to assist with packaging.  For example,
-#                              the "system" component library may be resolved to
-#                              "/usr/lib/libboost_system.so.1.42.0" instead of
-#                              "/usr/lib/libboost_system.so".  This does not
-#                              affect linking and should not be enabled unless
-#                              the user needs this information.
-#
-# On Visual Studio and Borland compilers Boost headers request automatic
-# linking to corresponding libraries.  This requires matching libraries
-# to be linked explicitly or available in the link library search path.
-# In this case setting Boost_USE_STATIC_LIBS to OFF may not achieve
-# dynamic linking.  Boost automatic linking typically requests static
-# libraries with a few exceptions (such as Boost.Python).  Use::
-#
-#   add_definitions(${Boost_LIB_DIAGNOSTIC_DEFINITIONS})
-#
-# to ask Boost to report information about automatic linking requests.
-#
-# Example to find Boost headers only::
-#
-#   find_package(Boost 1.36.0)
-#   if(Boost_FOUND)
-#     include_directories(${Boost_INCLUDE_DIRS})
-#     add_executable(foo foo.cc)
-#   endif()
-#
-# Example to find Boost headers and some *static* libraries::
-#
-#   set(Boost_USE_STATIC_LIBS        ON) # only find static libs
-#   set(Boost_USE_MULTITHREADED      ON)
-#   set(Boost_USE_STATIC_RUNTIME    OFF)
-#   find_package(Boost 1.36.0 COMPONENTS date_time filesystem system ...)
-#   if(Boost_FOUND)
-#     include_directories(${Boost_INCLUDE_DIRS})
-#     add_executable(foo foo.cc)
-#     target_link_libraries(foo ${Boost_LIBRARIES})
-#   endif()
-#
-# Boost CMake
-# ^^^^^^^^^^^
-#
-# If Boost was built using the boost-cmake project it provides a package
-# configuration file for use with find_package's Config mode.  This
-# module looks for the package configuration file called
-# BoostConfig.cmake or boost-config.cmake and stores the result in cache
-# entry "Boost_DIR".  If found, the package configuration file is loaded
-# and this module returns with no further action.  See documentation of
-# the Boost CMake package configuration for details on what it provides.
-#
-# Set Boost_NO_BOOST_CMAKE to ON to disable the search for boost-cmake.
-
-#=============================================================================
-# Copyright 2006-2012 Kitware, Inc.
-# Copyright 2006-2008 Andreas Schneider <mail@cynapses.org>
-# Copyright 2007      Wengo
-# Copyright 2007      Mike Jackson
-# Copyright 2008      Andreas Pakulat <apaku@gmx.de>
-# Copyright 2008-2012 Philip Lowman <philip@yhbt.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-#-------------------------------------------------------------------------------
-# Before we go searching, check whether boost-cmake is available, unless the
-# user specifically asked NOT to search for boost-cmake.
-#
-# If Boost_DIR is set, this behaves as any find_package call would. If not,
-# it looks at BOOST_ROOT and BOOSTROOT to find Boost.
-#
-if (NOT Boost_NO_BOOST_CMAKE)
-  # If Boost_DIR is not set, look for BOOSTROOT and BOOST_ROOT as alternatives,
-  # since these are more conventional for Boost.
-  if ("$ENV{Boost_DIR}" STREQUAL "")
-    if (NOT "$ENV{BOOST_ROOT}" STREQUAL "")
-      set(ENV{Boost_DIR} $ENV{BOOST_ROOT})
-    elseif (NOT "$ENV{BOOSTROOT}" STREQUAL "")
-      set(ENV{Boost_DIR} $ENV{BOOSTROOT})
-    endif()
-  endif()
-
-  # Do the same find_package call but look specifically for the CMake version.
-  # Note that args are passed in the Boost_FIND_xxxxx variables, so there is no
-  # need to delegate them to this find_package call.
-  find_package(Boost QUIET NO_MODULE)
-  mark_as_advanced(Boost_DIR)
-
-  # If we found boost-cmake, then we're done.  Print out what we found.
-  # Otherwise let the rest of the module try to find it.
-  if (Boost_FOUND)
-    message("Boost ${Boost_FIND_VERSION} found.")
-    if (Boost_FIND_COMPONENTS)
-      message("Found Boost components:")
-      message("   ${Boost_FIND_COMPONENTS}")
-    endif()
-    return()
-  endif()
-endif()
-
-
-#-------------------------------------------------------------------------------
-#  FindBoost functions & macros
-#
-
-############################################
-#
-# Check the existence of the libraries.
-#
-############################################
-# This macro was taken directly from the FindQt4.cmake file that is included
-# with the CMake distribution. This is NOT my work. All work was done by the
-# original authors of the FindQt4.cmake file. Only minor modifications were
-# made to remove references to Qt and make this file more generally applicable
-# And ELSE/ENDIF pairs were removed for readability.
-#########################################################################
-
-macro(_Boost_ADJUST_LIB_VARS basename)
-  if(Boost_INCLUDE_DIR )
-    if(Boost_${basename}_LIBRARY_DEBUG AND Boost_${basename}_LIBRARY_RELEASE)
-      # if the generator supports configuration types then set
-      # optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value
-      if(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
-        set(Boost_${basename}_LIBRARY optimized ${Boost_${basename}_LIBRARY_RELEASE} debug ${Boost_${basename}_LIBRARY_DEBUG})
-      else()
-        # if there are no configuration types and CMAKE_BUILD_TYPE has no value
-        # then just use the release libraries
-        set(Boost_${basename}_LIBRARY ${Boost_${basename}_LIBRARY_RELEASE} )
-      endif()
-      # FIXME: This probably should be set for both cases
-      set(Boost_${basename}_LIBRARIES optimized ${Boost_${basename}_LIBRARY_RELEASE} debug ${Boost_${basename}_LIBRARY_DEBUG})
-    endif()
-
-    # if only the release version was found, set the debug variable also to the release version
-    if(Boost_${basename}_LIBRARY_RELEASE AND NOT Boost_${basename}_LIBRARY_DEBUG)
-      set(Boost_${basename}_LIBRARY_DEBUG ${Boost_${basename}_LIBRARY_RELEASE})
-      set(Boost_${basename}_LIBRARY       ${Boost_${basename}_LIBRARY_RELEASE})
-      set(Boost_${basename}_LIBRARIES     ${Boost_${basename}_LIBRARY_RELEASE})
-    endif()
-
-    # if only the debug version was found, set the release variable also to the debug version
-    if(Boost_${basename}_LIBRARY_DEBUG AND NOT Boost_${basename}_LIBRARY_RELEASE)
-      set(Boost_${basename}_LIBRARY_RELEASE ${Boost_${basename}_LIBRARY_DEBUG})
-      set(Boost_${basename}_LIBRARY         ${Boost_${basename}_LIBRARY_DEBUG})
-      set(Boost_${basename}_LIBRARIES       ${Boost_${basename}_LIBRARY_DEBUG})
-    endif()
-
-    # If the debug & release library ends up being the same, omit the keywords
-    if(${Boost_${basename}_LIBRARY_RELEASE} STREQUAL ${Boost_${basename}_LIBRARY_DEBUG})
-      set(Boost_${basename}_LIBRARY   ${Boost_${basename}_LIBRARY_RELEASE} )
-      set(Boost_${basename}_LIBRARIES ${Boost_${basename}_LIBRARY_RELEASE} )
-    endif()
-
-    if(Boost_${basename}_LIBRARY)
-      set(Boost_${basename}_FOUND ON)
-    endif()
-
-  endif()
-  # Make variables changeable to the advanced user
-  mark_as_advanced(
-      Boost_${basename}_LIBRARY_RELEASE
-      Boost_${basename}_LIBRARY_DEBUG
-  )
-endmacro()
-
-macro(_Boost_CHANGE_DETECT changed_var)
-  set(${changed_var} 0)
-  foreach(v ${ARGN})
-    if(DEFINED _Boost_COMPONENTS_SEARCHED)
-      if(${v})
-        if(_${v}_LAST)
-          string(COMPARE NOTEQUAL "${${v}}" "${_${v}_LAST}" _${v}_CHANGED)
-        else()
-          set(_${v}_CHANGED 1)
-        endif()
-      elseif(_${v}_LAST)
-        set(_${v}_CHANGED 1)
-      endif()
-      if(_${v}_CHANGED)
-        set(${changed_var} 1)
-      endif()
-    else()
-      set(_${v}_CHANGED 0)
-    endif()
-  endforeach()
-endmacro()
-
-macro(_Boost_FIND_LIBRARY var)
-  find_library(${var} ${ARGN})
-
-  if(${var})
-    # If this is the first library found then save Boost_LIBRARY_DIR.
-    if(NOT Boost_LIBRARY_DIR)
-      get_filename_component(_dir "${${var}}" PATH)
-      set(Boost_LIBRARY_DIR "${_dir}" CACHE PATH "Boost library directory" FORCE)
-    endif()
-  elseif(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
-    # Try component-specific hints but do not save Boost_LIBRARY_DIR.
-    find_library(${var} HINTS ${_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT} ${ARGN})
-  endif()
-
-  # If Boost_LIBRARY_DIR is known then search only there.
-  if(Boost_LIBRARY_DIR)
-    set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
-  endif()
-endmacro()
-
-#-------------------------------------------------------------------------------
-
-#
-# Runs compiler with "-dumpversion" and parses major/minor
-# version with a regex.
-#
-function(_Boost_COMPILER_DUMPVERSION _OUTPUT_VERSION)
-
-  exec_program(${CMAKE_CXX_COMPILER}
-    ARGS ${CMAKE_CXX_COMPILER_ARG1} -dumpversion
-    OUTPUT_VARIABLE _boost_COMPILER_VERSION
-  )
-  string(REGEX REPLACE "([0-9])\\.([0-9])(\\.[0-9])?" "\\1\\2"
-    _boost_COMPILER_VERSION ${_boost_COMPILER_VERSION})
-
-  set(${_OUTPUT_VERSION} ${_boost_COMPILER_VERSION} PARENT_SCOPE)
-endfunction()
-
-#
-# Take a list of libraries with "thread" in it
-# and prepend duplicates with "thread_${Boost_THREADAPI}"
-# at the front of the list
-#
-function(_Boost_PREPEND_LIST_WITH_THREADAPI _output)
-  set(_orig_libnames ${ARGN})
-  string(REPLACE "thread" "thread_${Boost_THREADAPI}" _threadapi_libnames "${_orig_libnames}")
-  set(${_output} ${_threadapi_libnames} ${_orig_libnames} PARENT_SCOPE)
-endfunction()
-
-#
-# If a library is found, replace its cache entry with its REALPATH
-#
-function(_Boost_SWAP_WITH_REALPATH _library _docstring)
-  if(${_library})
-    get_filename_component(_boost_filepathreal ${${_library}} REALPATH)
-    unset(${_library} CACHE)
-    set(${_library} ${_boost_filepathreal} CACHE FILEPATH "${_docstring}")
-  endif()
-endfunction()
-
-function(_Boost_CHECK_SPELLING _var)
-  if(${_var})
-    string(TOUPPER ${_var} _var_UC)
-    message(FATAL_ERROR "ERROR: ${_var} is not the correct spelling.  The proper spelling is ${_var_UC}.")
-  endif()
-endfunction()
-
-# Guesses Boost's compiler prefix used in built library names
-# Returns the guess by setting the variable pointed to by _ret
-function(_Boost_GUESS_COMPILER_PREFIX _ret)
-  if(CMAKE_CXX_COMPILER_ID STREQUAL "Intel"
-      OR CMAKE_CXX_COMPILER MATCHES "icl"
-      OR CMAKE_CXX_COMPILER MATCHES "icpc")
-    if(WIN32)
-      set (_boost_COMPILER "-iw")
-    else()
-      set (_boost_COMPILER "-il")
-    endif()
-  elseif (MSVC14)
-    set(_boost_COMPILER "-vc140")
-  elseif (MSVC12)
-    set(_boost_COMPILER "-vc120")
-  elseif (MSVC11)
-    set(_boost_COMPILER "-vc110")
-  elseif (MSVC10)
-    set(_boost_COMPILER "-vc100")
-  elseif (MSVC90)
-    set(_boost_COMPILER "-vc90")
-  elseif (MSVC80)
-    set(_boost_COMPILER "-vc80")
-  elseif (MSVC71)
-    set(_boost_COMPILER "-vc71")
-  elseif (MSVC70) # Good luck!
-    set(_boost_COMPILER "-vc7") # yes, this is correct
-  elseif (MSVC60) # Good luck!
-    set(_boost_COMPILER "-vc6") # yes, this is correct
-  elseif (BORLAND)
-    set(_boost_COMPILER "-bcb")
-  elseif(CMAKE_CXX_COMPILER_ID STREQUAL "SunPro")
-    set(_boost_COMPILER "-sw")
-  elseif (MINGW)
-    if(${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION} VERSION_LESS 1.34)
-        set(_boost_COMPILER "-mgw") # no GCC version encoding prior to 1.34
-    else()
-      _Boost_COMPILER_DUMPVERSION(_boost_COMPILER_VERSION)
-      set(_boost_COMPILER "-mgw${_boost_COMPILER_VERSION}")
-    endif()
-  elseif (UNIX)
-    if (CMAKE_COMPILER_IS_GNUCXX)
-      if(${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION} VERSION_LESS 1.34)
-        set(_boost_COMPILER "-gcc") # no GCC version encoding prior to 1.34
-      else()
-        _Boost_COMPILER_DUMPVERSION(_boost_COMPILER_VERSION)
-        # Determine which version of GCC we have.
-        if(APPLE)
-          if(Boost_MINOR_VERSION)
-            if(${Boost_MINOR_VERSION} GREATER 35)
-              # In Boost 1.36.0 and newer, the mangled compiler name used
-              # on Mac OS X/Darwin is "xgcc".
-              set(_boost_COMPILER "-xgcc${_boost_COMPILER_VERSION}")
-            else()
-              # In Boost <= 1.35.0, there is no mangled compiler name for
-              # the Mac OS X/Darwin version of GCC.
-              set(_boost_COMPILER "")
-            endif()
-          else()
-            # We don't know the Boost version, so assume it's
-            # pre-1.36.0.
-            set(_boost_COMPILER "")
-          endif()
-        else()
-          set(_boost_COMPILER "-gcc${_boost_COMPILER_VERSION}")
-        endif()
-      endif()
-    endif ()
-  else()
-    # TODO at least Boost_DEBUG here?
-    set(_boost_COMPILER "")
-  endif()
-  set(${_ret} ${_boost_COMPILER} PARENT_SCOPE)
-endfunction()
-
-#
-# End functions/macros
-#
-#-------------------------------------------------------------------------------
-
-#-------------------------------------------------------------------------------
-# main.
-#-------------------------------------------------------------------------------
-
-if(NOT DEFINED Boost_USE_MULTITHREADED)
-    set(Boost_USE_MULTITHREADED TRUE)
-endif()
-if(NOT DEFINED Boost_USE_DEBUG_RUNTIME)
-  set(Boost_USE_DEBUG_RUNTIME TRUE)
-endif()
-
-# Check the version of Boost against the requested version.
-if(Boost_FIND_VERSION AND NOT Boost_FIND_VERSION_MINOR)
-  message(SEND_ERROR "When requesting a specific version of Boost, you must provide at least the major and minor version numbers, e.g., 1.34")
-endif()
-
-if(Boost_FIND_VERSION_EXACT)
-  # The version may appear in a directory with or without the patch
-  # level, even when the patch level is non-zero.
-  set(_boost_TEST_VERSIONS
-    "${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}.${Boost_FIND_VERSION_PATCH}"
-    "${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
-else()
-  # The user has not requested an exact version.  Among known
-  # versions, find those that are acceptable to the user request.
-  set(_Boost_KNOWN_VERSIONS ${Boost_ADDITIONAL_VERSIONS}
-    "1.58.0" "1.58" "1.57.0" "1.57" "1.56.0" "1.56" "1.55.0" "1.55" "1.54.0" "1.54"
-    "1.53.0" "1.53" "1.52.0" "1.52" "1.51.0" "1.51"
-    "1.50.0" "1.50" "1.49.0" "1.49" "1.48.0" "1.48" "1.47.0" "1.47" "1.46.1"
-    "1.46.0" "1.46" "1.45.0" "1.45" "1.44.0" "1.44" "1.43.0" "1.43" "1.42.0" "1.42"
-    "1.41.0" "1.41" "1.40.0" "1.40" "1.39.0" "1.39" "1.38.0" "1.38" "1.37.0" "1.37"
-    "1.36.1" "1.36.0" "1.36" "1.35.1" "1.35.0" "1.35" "1.34.1" "1.34.0"
-    "1.34" "1.33.1" "1.33.0" "1.33")
-  set(_boost_TEST_VERSIONS)
-  if(Boost_FIND_VERSION)
-    set(_Boost_FIND_VERSION_SHORT "${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
-    # Select acceptable versions.
-    foreach(version ${_Boost_KNOWN_VERSIONS})
-      if(NOT "${version}" VERSION_LESS "${Boost_FIND_VERSION}")
-        # This version is high enough.
-        list(APPEND _boost_TEST_VERSIONS "${version}")
-      elseif("${version}.99" VERSION_EQUAL "${_Boost_FIND_VERSION_SHORT}.99")
-        # This version is a short-form for the requested version with
-        # the patch level dropped.
-        list(APPEND _boost_TEST_VERSIONS "${version}")
-      endif()
-    endforeach()
-  else()
-    # Any version is acceptable.
-    set(_boost_TEST_VERSIONS "${_Boost_KNOWN_VERSIONS}")
-  endif()
-endif()
-
-# The reason that we failed to find Boost. This will be set to a
-# user-friendly message when we fail to find some necessary piece of
-# Boost.
-set(Boost_ERROR_REASON)
-
-if(Boost_DEBUG)
-  # Output some of their choices
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "_boost_TEST_VERSIONS = ${_boost_TEST_VERSIONS}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "Boost_USE_MULTITHREADED = ${Boost_USE_MULTITHREADED}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "Boost_USE_STATIC_LIBS = ${Boost_USE_STATIC_LIBS}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "Boost_USE_STATIC_RUNTIME = ${Boost_USE_STATIC_RUNTIME}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "Boost_ADDITIONAL_VERSIONS = ${Boost_ADDITIONAL_VERSIONS}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "Boost_NO_SYSTEM_PATHS = ${Boost_NO_SYSTEM_PATHS}")
-endif()
-
-if(WIN32)
-  # In windows, automatic linking is performed, so you do not have
-  # to specify the libraries.  If you are linking to a dynamic
-  # runtime, then you can choose to link to either a static or a
-  # dynamic Boost library, the default is to do a static link.  You
-  # can alter this for a specific library "whatever" by defining
-  # BOOST_WHATEVER_DYN_LINK to force Boost library "whatever" to be
-  # linked dynamically.  Alternatively you can force all Boost
-  # libraries to dynamic link by defining BOOST_ALL_DYN_LINK.
-
-  # This feature can be disabled for Boost library "whatever" by
-  # defining BOOST_WHATEVER_NO_LIB, or for all of Boost by defining
-  # BOOST_ALL_NO_LIB.
-
-  # If you want to observe which libraries are being linked against
-  # then defining BOOST_LIB_DIAGNOSTIC will cause the auto-linking
-  # code to emit a #pragma message each time a library is selected
-  # for linking.
-  set(Boost_LIB_DIAGNOSTIC_DEFINITIONS "-DBOOST_LIB_DIAGNOSTIC")
-endif()
-
-_Boost_CHECK_SPELLING(Boost_ROOT)
-_Boost_CHECK_SPELLING(Boost_LIBRARYDIR)
-_Boost_CHECK_SPELLING(Boost_INCLUDEDIR)
-
-# Collect environment variable inputs as hints.  Do not consider changes.
-foreach(v BOOSTROOT BOOST_ROOT BOOST_INCLUDEDIR BOOST_LIBRARYDIR)
-  set(_env $ENV{${v}})
-  if(_env)
-    file(TO_CMAKE_PATH "${_env}" _ENV_${v})
-  else()
-    set(_ENV_${v} "")
-  endif()
-endforeach()
-if(NOT _ENV_BOOST_ROOT AND _ENV_BOOSTROOT)
-  set(_ENV_BOOST_ROOT "${_ENV_BOOSTROOT}")
-endif()
-
-# Collect inputs and cached results.  Detect changes since the last run.
-if(NOT BOOST_ROOT AND BOOSTROOT)
-  set(BOOST_ROOT "${BOOSTROOT}")
-endif()
-set(_Boost_VARS_DIR
-  BOOST_ROOT
-  Boost_NO_SYSTEM_PATHS
-  )
-
-if(Boost_DEBUG)
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "Declared as CMake or Environmental Variables:")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "  BOOST_ROOT = ${BOOST_ROOT}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "  BOOST_INCLUDEDIR = ${BOOST_INCLUDEDIR}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "  BOOST_LIBRARYDIR = ${BOOST_LIBRARYDIR}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                 "_boost_TEST_VERSIONS = ${_boost_TEST_VERSIONS}")
-endif()
-
-# ------------------------------------------------------------------------
-#  Search for Boost include DIR
-# ------------------------------------------------------------------------
-
-set(_Boost_VARS_INC BOOST_INCLUDEDIR Boost_INCLUDE_DIR Boost_ADDITIONAL_VERSIONS)
-_Boost_CHANGE_DETECT(_Boost_CHANGE_INCDIR ${_Boost_VARS_DIR} ${_Boost_VARS_INC})
-# Clear Boost_INCLUDE_DIR if it did not change but other input affecting the
-# location did.  We will find a new one based on the new inputs.
-if(_Boost_CHANGE_INCDIR AND NOT _Boost_INCLUDE_DIR_CHANGED)
-  unset(Boost_INCLUDE_DIR CACHE)
-endif()
-
-if(NOT Boost_INCLUDE_DIR)
-  set(_boost_INCLUDE_SEARCH_DIRS "")
-  if(BOOST_INCLUDEDIR)
-    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${BOOST_INCLUDEDIR})
-  elseif(_ENV_BOOST_INCLUDEDIR)
-    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${_ENV_BOOST_INCLUDEDIR})
-  endif()
-
-  if( BOOST_ROOT )
-    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${BOOST_ROOT}/include ${BOOST_ROOT})
-  elseif( _ENV_BOOST_ROOT )
-    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${_ENV_BOOST_ROOT}/include ${_ENV_BOOST_ROOT})
-  endif()
-
-  if( Boost_NO_SYSTEM_PATHS)
-    list(APPEND _boost_INCLUDE_SEARCH_DIRS NO_CMAKE_SYSTEM_PATH)
-  else()
-    list(APPEND _boost_INCLUDE_SEARCH_DIRS PATHS
-      C:/boost/include
-      C:/boost
-      /sw/local/include
-      )
-  endif()
-
-  # Try to find Boost by stepping backwards through the Boost versions
-  # we know about.
-  # Build a list of path suffixes for each version.
-  set(_boost_PATH_SUFFIXES)
-  foreach(_boost_VER ${_boost_TEST_VERSIONS})
-    # Add in a path suffix, based on the required version, ideally
-    # we could read this from version.hpp, but for that to work we'd
-    # need to know the include dir already
-    set(_boost_BOOSTIFIED_VERSION)
-
-    # Transform 1.35 => 1_35 and 1.36.0 => 1_36_0
-    if(_boost_VER MATCHES "([0-9]+)\\.([0-9]+)\\.([0-9]+)")
-        set(_boost_BOOSTIFIED_VERSION
-          "${CMAKE_MATCH_1}_${CMAKE_MATCH_2}_${CMAKE_MATCH_3}")
-    elseif(_boost_VER MATCHES "([0-9]+)\\.([0-9]+)")
-        set(_boost_BOOSTIFIED_VERSION
-          "${CMAKE_MATCH_1}_${CMAKE_MATCH_2}")
-    endif()
-
-    list(APPEND _boost_PATH_SUFFIXES
-      "boost-${_boost_BOOSTIFIED_VERSION}"
-      "boost_${_boost_BOOSTIFIED_VERSION}"
-      "boost/boost-${_boost_BOOSTIFIED_VERSION}"
-      "boost/boost_${_boost_BOOSTIFIED_VERSION}"
-      )
-
-  endforeach()
-
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "Include debugging info:")
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "  _boost_INCLUDE_SEARCH_DIRS = ${_boost_INCLUDE_SEARCH_DIRS}")
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "  _boost_PATH_SUFFIXES = ${_boost_PATH_SUFFIXES}")
-  endif()
-
-  # Look for a standard boost header file.
-  find_path(Boost_INCLUDE_DIR
-    NAMES         boost/config.hpp
-    HINTS         ${_boost_INCLUDE_SEARCH_DIRS}
-    PATH_SUFFIXES ${_boost_PATH_SUFFIXES}
-    )
-endif()
-
-# ------------------------------------------------------------------------
-#  Extract version information from version.hpp
-# ------------------------------------------------------------------------
-
-# Set Boost_FOUND based only on header location and version.
-# It will be updated below for component libraries.
-if(Boost_INCLUDE_DIR)
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "location of version.hpp: ${Boost_INCLUDE_DIR}/boost/version.hpp")
-  endif()
-
-  # Extract Boost_VERSION and Boost_LIB_VERSION from version.hpp
-  set(Boost_VERSION 0)
-  set(Boost_LIB_VERSION "")
-  file(STRINGS "${Boost_INCLUDE_DIR}/boost/version.hpp" _boost_VERSION_HPP_CONTENTS REGEX "#define BOOST_(LIB_)?VERSION ")
-  set(_Boost_VERSION_REGEX "([0-9]+)")
-  set(_Boost_LIB_VERSION_REGEX "\"([0-9_]+)\"")
-  foreach(v VERSION LIB_VERSION)
-    if("${_boost_VERSION_HPP_CONTENTS}" MATCHES "#define BOOST_${v} ${_Boost_${v}_REGEX}")
-      set(Boost_${v} "${CMAKE_MATCH_1}")
-    endif()
-  endforeach()
-  unset(_boost_VERSION_HPP_CONTENTS)
-
-  math(EXPR Boost_MAJOR_VERSION "${Boost_VERSION} / 100000")
-  math(EXPR Boost_MINOR_VERSION "${Boost_VERSION} / 100 % 1000")
-  math(EXPR Boost_SUBMINOR_VERSION "${Boost_VERSION} % 100")
-
-  set(Boost_ERROR_REASON
-    "${Boost_ERROR_REASON}Boost version: ${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}\nBoost include path: ${Boost_INCLUDE_DIR}")
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "version.hpp reveals boost "
-                   "${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
-  endif()
-
-  if(Boost_FIND_VERSION)
-    # Set Boost_FOUND based on requested version.
-    set(_Boost_VERSION "${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
-    if("${_Boost_VERSION}" VERSION_LESS "${Boost_FIND_VERSION}")
-      set(Boost_FOUND 0)
-      set(_Boost_VERSION_AGE "old")
-    elseif(Boost_FIND_VERSION_EXACT AND
-        NOT "${_Boost_VERSION}" VERSION_EQUAL "${Boost_FIND_VERSION}")
-      set(Boost_FOUND 0)
-      set(_Boost_VERSION_AGE "new")
-    else()
-      set(Boost_FOUND 1)
-    endif()
-    if(NOT Boost_FOUND)
-      # State that we found a version of Boost that is too new or too old.
-      set(Boost_ERROR_REASON
-        "${Boost_ERROR_REASON}\nDetected version of Boost is too ${_Boost_VERSION_AGE}. Requested version was ${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
-      if (Boost_FIND_VERSION_PATCH)
-        set(Boost_ERROR_REASON
-          "${Boost_ERROR_REASON}.${Boost_FIND_VERSION_PATCH}")
-      endif ()
-      if (NOT Boost_FIND_VERSION_EXACT)
-        set(Boost_ERROR_REASON "${Boost_ERROR_REASON} (or newer)")
-      endif ()
-      set(Boost_ERROR_REASON "${Boost_ERROR_REASON}.")
-    endif ()
-  else()
-    # Caller will accept any Boost version.
-    set(Boost_FOUND 1)
-  endif()
-else()
-  set(Boost_FOUND 0)
-  set(Boost_ERROR_REASON
-    "${Boost_ERROR_REASON}Unable to find the Boost header files. Please set BOOST_ROOT to the root directory containing Boost or BOOST_INCLUDEDIR to the directory containing Boost's headers.")
-endif()
-
-# ------------------------------------------------------------------------
-#  Prefix initialization
-# ------------------------------------------------------------------------
-
-set(Boost_LIB_PREFIX "")
-if ( WIN32 AND Boost_USE_STATIC_LIBS AND NOT CYGWIN)
-  set(Boost_LIB_PREFIX "lib")
-endif()
-
-if ( NOT Boost_NAMESPACE )
-  set(Boost_NAMESPACE "boost")
-endif()
-
-# ------------------------------------------------------------------------
-#  Suffix initialization and compiler suffix detection.
-# ------------------------------------------------------------------------
-
-set(_Boost_VARS_NAME
-  Boost_NAMESPACE
-  Boost_COMPILER
-  Boost_THREADAPI
-  Boost_USE_DEBUG_PYTHON
-  Boost_USE_MULTITHREADED
-  Boost_USE_STATIC_LIBS
-  Boost_USE_STATIC_RUNTIME
-  Boost_USE_STLPORT
-  Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
-  )
-_Boost_CHANGE_DETECT(_Boost_CHANGE_LIBNAME ${_Boost_VARS_NAME})
-
-# Setting some more suffixes for the library
-if (Boost_COMPILER)
-  set(_boost_COMPILER ${Boost_COMPILER})
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "using user-specified Boost_COMPILER = ${_boost_COMPILER}")
-  endif()
-else()
-  # Attempt to guess the compiler suffix
-  # NOTE: this is not perfect yet, if you experience any issues
-  # please report them and use the Boost_COMPILER variable
-  # to work around the problems.
-  _Boost_GUESS_COMPILER_PREFIX(_boost_COMPILER)
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-      "guessed _boost_COMPILER = ${_boost_COMPILER}")
-  endif()
-endif()
-
-set (_boost_MULTITHREADED "-mt")
-if( NOT Boost_USE_MULTITHREADED )
-  set (_boost_MULTITHREADED "")
-endif()
-if(Boost_DEBUG)
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-    "_boost_MULTITHREADED = ${_boost_MULTITHREADED}")
-endif()
-
-#======================
-# Systematically build up the Boost ABI tag
-# http://boost.org/doc/libs/1_41_0/more/getting_started/windows.html#library-naming
-set( _boost_RELEASE_ABI_TAG "-")
-set( _boost_DEBUG_ABI_TAG   "-")
-# Key       Use this library when:
-#  s        linking statically to the C++ standard library and
-#           compiler runtime support libraries.
-if(Boost_USE_STATIC_RUNTIME)
-  set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}s")
-  set( _boost_DEBUG_ABI_TAG   "${_boost_DEBUG_ABI_TAG}s")
-endif()
-#  g        using debug versions of the standard and runtime
-#           support libraries
-if(WIN32 AND Boost_USE_DEBUG_RUNTIME)
-  if(MSVC OR "${CMAKE_CXX_COMPILER}" MATCHES "icl"
-          OR "${CMAKE_CXX_COMPILER}" MATCHES "icpc")
-    set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}g")
-  endif()
-endif()
-#  y        using special debug build of python
-if(Boost_USE_DEBUG_PYTHON)
-  set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}y")
-endif()
-#  d        using a debug version of your code
-set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}d")
-#  p        using the STLport standard library rather than the
-#           default one supplied with your compiler
-if(Boost_USE_STLPORT)
-  set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}p")
-  set( _boost_DEBUG_ABI_TAG   "${_boost_DEBUG_ABI_TAG}p")
-endif()
-#  n        using the STLport deprecated "native iostreams" feature
-if(Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS)
-  set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}n")
-  set( _boost_DEBUG_ABI_TAG   "${_boost_DEBUG_ABI_TAG}n")
-endif()
-
-if(Boost_DEBUG)
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-    "_boost_RELEASE_ABI_TAG = ${_boost_RELEASE_ABI_TAG}")
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-    "_boost_DEBUG_ABI_TAG = ${_boost_DEBUG_ABI_TAG}")
-endif()
-
-# ------------------------------------------------------------------------
-#  Begin finding boost libraries
-# ------------------------------------------------------------------------
-set(_Boost_VARS_LIB BOOST_LIBRARYDIR Boost_LIBRARY_DIR)
-_Boost_CHANGE_DETECT(_Boost_CHANGE_LIBDIR ${_Boost_VARS_DIR} ${_Boost_VARS_LIB} Boost_INCLUDE_DIR)
-# Clear Boost_LIBRARY_DIR if it did not change but other input affecting the
-# location did.  We will find a new one based on the new inputs.
-if(_Boost_CHANGE_LIBDIR AND NOT _Boost_LIBRARY_DIR_CHANGED)
-  unset(Boost_LIBRARY_DIR CACHE)
-endif()
-
-if(Boost_LIBRARY_DIR)
-  set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
-else()
-  set(_boost_LIBRARY_SEARCH_DIRS "")
-  if(BOOST_LIBRARYDIR)
-    list(APPEND _boost_LIBRARY_SEARCH_DIRS ${BOOST_LIBRARYDIR})
-  elseif(_ENV_BOOST_LIBRARYDIR)
-    list(APPEND _boost_LIBRARY_SEARCH_DIRS ${_ENV_BOOST_LIBRARYDIR})
-  endif()
-
-  if(BOOST_ROOT)
-    list(APPEND _boost_LIBRARY_SEARCH_DIRS ${BOOST_ROOT}/lib ${BOOST_ROOT}/stage/lib)
-  elseif(_ENV_BOOST_ROOT)
-    list(APPEND _boost_LIBRARY_SEARCH_DIRS ${_ENV_BOOST_ROOT}/lib ${_ENV_BOOST_ROOT}/stage/lib)
-  endif()
-
-  list(APPEND _boost_LIBRARY_SEARCH_DIRS
-    ${Boost_INCLUDE_DIR}/lib
-    ${Boost_INCLUDE_DIR}/../lib
-    ${Boost_INCLUDE_DIR}/stage/lib
-    )
-  if( Boost_NO_SYSTEM_PATHS )
-    list(APPEND _boost_LIBRARY_SEARCH_DIRS NO_CMAKE_SYSTEM_PATH)
-  else()
-    list(APPEND _boost_LIBRARY_SEARCH_DIRS PATHS
-      C:/boost/lib
-      C:/boost
-      /sw/local/lib
-      )
-  endif()
-endif()
-
-if(Boost_DEBUG)
-  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-    "_boost_LIBRARY_SEARCH_DIRS = ${_boost_LIBRARY_SEARCH_DIRS}")
-endif()
-
-# Support preference of static libs by adjusting CMAKE_FIND_LIBRARY_SUFFIXES
-if( Boost_USE_STATIC_LIBS )
-  set( _boost_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-  if(WIN32)
-    set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
-  else()
-    set(CMAKE_FIND_LIBRARY_SUFFIXES .a )
-  endif()
-endif()
-
-# We want to use the tag inline below without risking double dashes
-if(_boost_RELEASE_ABI_TAG)
-  if(${_boost_RELEASE_ABI_TAG} STREQUAL "-")
-    set(_boost_RELEASE_ABI_TAG "")
-  endif()
-endif()
-if(_boost_DEBUG_ABI_TAG)
-  if(${_boost_DEBUG_ABI_TAG} STREQUAL "-")
-    set(_boost_DEBUG_ABI_TAG "")
-  endif()
-endif()
-
-# The previous behavior of FindBoost when Boost_USE_STATIC_LIBS was enabled
-# on WIN32 was to:
-#  1. Search for static libs compiled against a SHARED C++ standard runtime library (use if found)
-#  2. Search for static libs compiled against a STATIC C++ standard runtime library (use if found)
-# We maintain this behavior since changing it could break people's builds.
-# To disable the ambiguous behavior, the user need only
-# set Boost_USE_STATIC_RUNTIME either ON or OFF.
-set(_boost_STATIC_RUNTIME_WORKAROUND false)
-if(WIN32 AND Boost_USE_STATIC_LIBS)
-  if(NOT DEFINED Boost_USE_STATIC_RUNTIME)
-    set(_boost_STATIC_RUNTIME_WORKAROUND true)
-  endif()
-endif()
-
-# On versions < 1.35, remove the System library from the considered list
-# since it wasn't added until 1.35.
-if(Boost_VERSION AND Boost_FIND_COMPONENTS)
-   if(Boost_VERSION LESS 103500)
-     list(REMOVE_ITEM Boost_FIND_COMPONENTS system)
-   endif()
-endif()
-
-# If the user changed any of our control inputs flush previous results.
-if(_Boost_CHANGE_LIBDIR OR _Boost_CHANGE_LIBNAME)
-  foreach(COMPONENT ${_Boost_COMPONENTS_SEARCHED})
-    string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
-    foreach(c DEBUG RELEASE)
-      set(_var Boost_${UPPERCOMPONENT}_LIBRARY_${c})
-      unset(${_var} CACHE)
-      set(${_var} "${_var}-NOTFOUND")
-    endforeach()
-  endforeach()
-  set(_Boost_COMPONENTS_SEARCHED "")
-endif()
-
-foreach(COMPONENT ${Boost_FIND_COMPONENTS})
-  string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
-
-  set( _boost_docstring_release "Boost ${COMPONENT} library (release)")
-  set( _boost_docstring_debug   "Boost ${COMPONENT} library (debug)")
-
-  # Compute component-specific hints.
-  set(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT "")
-  if(${COMPONENT} STREQUAL "mpi" OR ${COMPONENT} STREQUAL "mpi_python" OR
-     ${COMPONENT} STREQUAL "graph_parallel")
-    foreach(lib ${MPI_CXX_LIBRARIES} ${MPI_C_LIBRARIES})
-      if(IS_ABSOLUTE "${lib}")
-        get_filename_component(libdir "${lib}" PATH)
-        string(REPLACE "\\" "/" libdir "${libdir}")
-        list(APPEND _Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT ${libdir})
-      endif()
-    endforeach()
-  endif()
-
-  # Consolidate and report component-specific hints.
-  if(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
-    list(REMOVE_DUPLICATES _Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
-    if(Boost_DEBUG)
-      message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-        "Component-specific library search paths for ${COMPONENT}: "
-        "${_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT}")
-    endif()
-  endif()
-
-  #
-  # Find RELEASE libraries
-  #
-  set(_boost_RELEASE_NAMES
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}-${Boost_LIB_VERSION}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}-${Boost_LIB_VERSION}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT} )
-  if(_boost_STATIC_RUNTIME_WORKAROUND)
-    set(_boost_RELEASE_STATIC_ABI_TAG "-s${_boost_RELEASE_ABI_TAG}")
-    list(APPEND _boost_RELEASE_NAMES
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG} )
-  endif()
-  if(Boost_THREADAPI AND ${COMPONENT} STREQUAL "thread")
-     _Boost_PREPEND_LIST_WITH_THREADAPI(_boost_RELEASE_NAMES ${_boost_RELEASE_NAMES})
-  endif()
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "Searching for ${UPPERCOMPONENT}_LIBRARY_RELEASE: ${_boost_RELEASE_NAMES}")
-  endif()
-
-  # Avoid passing backslashes to _Boost_FIND_LIBRARY due to macro re-parsing.
-  string(REPLACE "\\" "/" _boost_LIBRARY_SEARCH_DIRS_tmp "${_boost_LIBRARY_SEARCH_DIRS}")
-
-  _Boost_FIND_LIBRARY(Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE
-    NAMES ${_boost_RELEASE_NAMES}
-    HINTS ${_boost_LIBRARY_SEARCH_DIRS_tmp}
-    NAMES_PER_DIR
-    DOC "${_boost_docstring_release}"
-    )
-
-  #
-  # Find DEBUG libraries
-  #
-  set(_boost_DEBUG_NAMES
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}-${Boost_LIB_VERSION}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}-${Boost_LIB_VERSION}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}
-    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT} )
-  if(_boost_STATIC_RUNTIME_WORKAROUND)
-    set(_boost_DEBUG_STATIC_ABI_TAG "-s${_boost_DEBUG_ABI_TAG}")
-    list(APPEND _boost_DEBUG_NAMES
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
-      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG} )
-  endif()
-  if(Boost_THREADAPI AND ${COMPONENT} STREQUAL "thread")
-     _Boost_PREPEND_LIST_WITH_THREADAPI(_boost_DEBUG_NAMES ${_boost_DEBUG_NAMES})
-  endif()
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
-                   "Searching for ${UPPERCOMPONENT}_LIBRARY_DEBUG: ${_boost_DEBUG_NAMES}")
-  endif()
-
-  # Avoid passing backslashes to _Boost_FIND_LIBRARY due to macro re-parsing.
-  string(REPLACE "\\" "/" _boost_LIBRARY_SEARCH_DIRS_tmp "${_boost_LIBRARY_SEARCH_DIRS}")
-
-  _Boost_FIND_LIBRARY(Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG
-    NAMES ${_boost_DEBUG_NAMES}
-    HINTS ${_boost_LIBRARY_SEARCH_DIRS_tmp}
-    NAMES_PER_DIR
-    DOC "${_boost_docstring_debug}"
-    )
-
-  if(Boost_REALPATH)
-    _Boost_SWAP_WITH_REALPATH(Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE "${_boost_docstring_release}")
-    _Boost_SWAP_WITH_REALPATH(Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG   "${_boost_docstring_debug}"  )
-  endif()
-
-  _Boost_ADJUST_LIB_VARS(${UPPERCOMPONENT})
-
-endforeach()
-
-# Restore the original find library ordering
-if( Boost_USE_STATIC_LIBS )
-  set(CMAKE_FIND_LIBRARY_SUFFIXES ${_boost_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
-endif()
-
-# ------------------------------------------------------------------------
-#  End finding boost libraries
-# ------------------------------------------------------------------------
-
-set(Boost_INCLUDE_DIRS ${Boost_INCLUDE_DIR})
-set(Boost_LIBRARY_DIRS ${Boost_LIBRARY_DIR})
-
-# The above setting of Boost_FOUND was based only on the header files.
-# Update it for the requested component libraries.
-if(Boost_FOUND)
-  # The headers were found.  Check for requested component libs.
-  set(_boost_CHECKED_COMPONENT FALSE)
-  set(_Boost_MISSING_COMPONENTS "")
-  foreach(COMPONENT ${Boost_FIND_COMPONENTS})
-    string(TOUPPER ${COMPONENT} COMPONENT)
-    set(_boost_CHECKED_COMPONENT TRUE)
-    if(NOT Boost_${COMPONENT}_FOUND)
-      string(TOLOWER ${COMPONENT} COMPONENT)
-      list(APPEND _Boost_MISSING_COMPONENTS ${COMPONENT})
-    endif()
-  endforeach()
-
-  if(Boost_DEBUG)
-    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] Boost_FOUND = ${Boost_FOUND}")
-  endif()
-
-  if (_Boost_MISSING_COMPONENTS)
-    set(Boost_FOUND 0)
-    # We were unable to find some libraries, so generate a sensible
-    # error message that lists the libraries we were unable to find.
-    set(Boost_ERROR_REASON
-      "${Boost_ERROR_REASON}\nCould not find the following")
-    if(Boost_USE_STATIC_LIBS)
-      set(Boost_ERROR_REASON "${Boost_ERROR_REASON} static")
-    endif()
-    set(Boost_ERROR_REASON
-      "${Boost_ERROR_REASON} Boost libraries:\n")
-    foreach(COMPONENT ${_Boost_MISSING_COMPONENTS})
-      set(Boost_ERROR_REASON
-        "${Boost_ERROR_REASON}        ${Boost_NAMESPACE}_${COMPONENT}\n")
-    endforeach()
-
-    list(LENGTH Boost_FIND_COMPONENTS Boost_NUM_COMPONENTS_WANTED)
-    list(LENGTH _Boost_MISSING_COMPONENTS Boost_NUM_MISSING_COMPONENTS)
-    if (${Boost_NUM_COMPONENTS_WANTED} EQUAL ${Boost_NUM_MISSING_COMPONENTS})
-      set(Boost_ERROR_REASON
-        "${Boost_ERROR_REASON}No Boost libraries were found. You may need to set BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT to the location of Boost.")
-    else ()
-      set(Boost_ERROR_REASON
-        "${Boost_ERROR_REASON}Some (but not all) of the required Boost libraries were found. You may need to install these additional Boost libraries. Alternatively, set BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT to the location of Boost.")
-    endif ()
-  endif ()
-
-  if( NOT Boost_LIBRARY_DIRS AND NOT _boost_CHECKED_COMPONENT )
-    # Compatibility Code for backwards compatibility with CMake
-    # 2.4's FindBoost module.
-
-    # Look for the boost library path.
-    # Note that the user may not have installed any libraries
-    # so it is quite possible the Boost_LIBRARY_DIRS may not exist.
-    set(_boost_LIB_DIR ${Boost_INCLUDE_DIR})
-
-    if("${_boost_LIB_DIR}" MATCHES "boost-[0-9]+")
-      get_filename_component(_boost_LIB_DIR ${_boost_LIB_DIR} PATH)
-    endif()
-
-    if("${_boost_LIB_DIR}" MATCHES "/include$")
-      # Strip off the trailing "/include" in the path.
-      get_filename_component(_boost_LIB_DIR ${_boost_LIB_DIR} PATH)
-    endif()
-
-    if(EXISTS "${_boost_LIB_DIR}/lib")
-      set(_boost_LIB_DIR ${_boost_LIB_DIR}/lib)
-    else()
-      if(EXISTS "${_boost_LIB_DIR}/stage/lib")
-        set(_boost_LIB_DIR ${_boost_LIB_DIR}/stage/lib)
-      else()
-        set(_boost_LIB_DIR "")
-      endif()
-    endif()
-
-    if(_boost_LIB_DIR AND EXISTS "${_boost_LIB_DIR}")
-      set(Boost_LIBRARY_DIRS ${_boost_LIB_DIR})
-    endif()
-
-  endif()
-else()
-  # Boost headers were not found so no components were found.
-  foreach(COMPONENT ${Boost_FIND_COMPONENTS})
-    string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
-    set(Boost_${UPPERCOMPONENT}_FOUND 0)
-  endforeach()
-endif()
-
-# ------------------------------------------------------------------------
-#  Notification to end user about what was found
-# ------------------------------------------------------------------------
-
-set(Boost_LIBRARIES "")
-if(Boost_FOUND)
-  if(NOT Boost_FIND_QUIETLY)
-    message(STATUS "Boost version: ${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
-    if(Boost_FIND_COMPONENTS)
-      message(STATUS "Found the following Boost libraries:")
-    endif()
-  endif()
-  foreach( COMPONENT  ${Boost_FIND_COMPONENTS} )
-    string( TOUPPER ${COMPONENT} UPPERCOMPONENT )
-    if( Boost_${UPPERCOMPONENT}_FOUND )
-      if(NOT Boost_FIND_QUIETLY)
-        message (STATUS "  ${COMPONENT}")
-      endif()
-      list(APPEND Boost_LIBRARIES ${Boost_${UPPERCOMPONENT}_LIBRARY})
-    endif()
-  endforeach()
-else()
-  if(Boost_FIND_REQUIRED)
-    message(SEND_ERROR "Unable to find the requested Boost libraries.\n${Boost_ERROR_REASON}")
-  else()
-    if(NOT Boost_FIND_QUIETLY)
-      # we opt not to automatically output Boost_ERROR_REASON here as
-      # it could be quite lengthy and somewhat imposing in its requests
-      # Since Boost is not always a required dependency we'll leave this
-      # up to the end-user.
-      if(Boost_DEBUG OR Boost_DETAILED_FAILURE_MSG)
-        message(STATUS "Could NOT find Boost\n${Boost_ERROR_REASON}")
-      else()
-        message(STATUS "Could NOT find Boost")
-      endif()
-    endif()
-  endif()
-endif()
-
-# Configure display of cache entries in GUI.
-foreach(v BOOSTROOT BOOST_ROOT ${_Boost_VARS_INC} ${_Boost_VARS_LIB})
-  get_property(_type CACHE ${v} PROPERTY TYPE)
-  if(_type)
-    set_property(CACHE ${v} PROPERTY ADVANCED 1)
-    if("x${_type}" STREQUAL "xUNINITIALIZED")
-      if("x${v}" STREQUAL "xBoost_ADDITIONAL_VERSIONS")
-        set_property(CACHE ${v} PROPERTY TYPE STRING)
-      else()
-        set_property(CACHE ${v} PROPERTY TYPE PATH)
-      endif()
-    endif()
-  endif()
-endforeach()
-
-# Record last used values of input variables so we can
-# detect on the next run if the user changed them.
-foreach(v
-    ${_Boost_VARS_INC} ${_Boost_VARS_LIB}
-    ${_Boost_VARS_DIR} ${_Boost_VARS_NAME}
-    )
-  if(DEFINED ${v})
-    set(_${v}_LAST "${${v}}" CACHE INTERNAL "Last used ${v} value.")
-  else()
-    unset(_${v}_LAST CACHE)
-  endif()
-endforeach()
-
-# Maintain a persistent list of components requested anywhere since
-# the last flush.
-set(_Boost_COMPONENTS_SEARCHED "${_Boost_COMPONENTS_SEARCHED}")
-list(APPEND _Boost_COMPONENTS_SEARCHED ${Boost_FIND_COMPONENTS})
-list(REMOVE_DUPLICATES _Boost_COMPONENTS_SEARCHED)
-list(SORT _Boost_COMPONENTS_SEARCHED)
-set(_Boost_COMPONENTS_SEARCHED "${_Boost_COMPONENTS_SEARCHED}"
-  CACHE INTERNAL "Components requested for this build tree.")
diff --git a/share/cmake-3.2/Modules/FindCUDA.cmake b/share/cmake-3.2/Modules/FindCUDA.cmake
deleted file mode 100644
index 81e1cad..0000000
--- a/share/cmake-3.2/Modules/FindCUDA.cmake
+++ /dev/null
@@ -1,1687 +0,0 @@
-#.rst:
-# FindCUDA
-# --------
-#
-# Tools for building CUDA C files: libraries and build dependencies.
-#
-# This script locates the NVIDIA CUDA C tools.  It should work on linux,
-# windows, and mac and should be reasonably up to date with CUDA C
-# releases.
-#
-# This script makes use of the standard find_package arguments of
-# <VERSION>, REQUIRED and QUIET.  CUDA_FOUND will report if an
-# acceptable version of CUDA was found.
-#
-# The script will prompt the user to specify CUDA_TOOLKIT_ROOT_DIR if
-# the prefix cannot be determined by the location of nvcc in the system
-# path and REQUIRED is specified to find_package().  To use a different
-# installed version of the toolkit set the environment variable
-# CUDA_BIN_PATH before running cmake (e.g.
-# CUDA_BIN_PATH=/usr/local/cuda1.0 instead of the default
-# /usr/local/cuda) or set CUDA_TOOLKIT_ROOT_DIR after configuring.  If
-# you change the value of CUDA_TOOLKIT_ROOT_DIR, various components that
-# depend on the path will be relocated.
-#
-# It might be necessary to set CUDA_TOOLKIT_ROOT_DIR manually on certain
-# platforms, or to use a cuda runtime not installed in the default
-# location.  In newer versions of the toolkit the cuda library is
-# included with the graphics driver- be sure that the driver version
-# matches what is needed by the cuda runtime version.
-#
-# The following variables affect the behavior of the macros in the
-# script (in alphebetical order).  Note that any of these flags can be
-# changed multiple times in the same directory before calling
-# CUDA_ADD_EXECUTABLE, CUDA_ADD_LIBRARY, CUDA_COMPILE, CUDA_COMPILE_PTX,
-# CUDA_COMPILE_FATBIN, CUDA_COMPILE_CUBIN or CUDA_WRAP_SRCS::
-#
-#   CUDA_64_BIT_DEVICE_CODE (Default matches host bit size)
-#   -- Set to ON to compile for 64 bit device code, OFF for 32 bit device code.
-#      Note that making this different from the host code when generating object
-#      or C files from CUDA code just won't work, because size_t gets defined by
-#      nvcc in the generated source.  If you compile to PTX and then load the
-#      file yourself, you can mix bit sizes between device and host.
-#
-#   CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE (Default ON)
-#   -- Set to ON if you want the custom build rule to be attached to the source
-#      file in Visual Studio.  Turn OFF if you add the same cuda file to multiple
-#      targets.
-#
-#      This allows the user to build the target from the CUDA file; however, bad
-#      things can happen if the CUDA source file is added to multiple targets.
-#      When performing parallel builds it is possible for the custom build
-#      command to be run more than once and in parallel causing cryptic build
-#      errors.  VS runs the rules for every source file in the target, and a
-#      source can have only one rule no matter how many projects it is added to.
-#      When the rule is run from multiple targets race conditions can occur on
-#      the generated file.  Eventually everything will get built, but if the user
-#      is unaware of this behavior, there may be confusion.  It would be nice if
-#      this script could detect the reuse of source files across multiple targets
-#      and turn the option off for the user, but no good solution could be found.
-#
-#   CUDA_BUILD_CUBIN (Default OFF)
-#   -- Set to ON to enable and extra compilation pass with the -cubin option in
-#      Device mode. The output is parsed and register, shared memory usage is
-#      printed during build.
-#
-#   CUDA_BUILD_EMULATION (Default OFF for device mode)
-#   -- Set to ON for Emulation mode. -D_DEVICEEMU is defined for CUDA C files
-#      when CUDA_BUILD_EMULATION is TRUE.
-#
-#   CUDA_GENERATED_OUTPUT_DIR (Default CMAKE_CURRENT_BINARY_DIR)
-#   -- Set to the path you wish to have the generated files placed.  If it is
-#      blank output files will be placed in CMAKE_CURRENT_BINARY_DIR.
-#      Intermediate files will always be placed in
-#      CMAKE_CURRENT_BINARY_DIR/CMakeFiles.
-#
-#   CUDA_HOST_COMPILATION_CPP (Default ON)
-#   -- Set to OFF for C compilation of host code.
-#
-#   CUDA_HOST_COMPILER (Default CMAKE_C_COMPILER, $(VCInstallDir)/bin for VS)
-#   -- Set the host compiler to be used by nvcc.  Ignored if -ccbin or
-#      --compiler-bindir is already present in the CUDA_NVCC_FLAGS or
-#      CUDA_NVCC_FLAGS_<CONFIG> variables.  For Visual Studio targets
-#      $(VCInstallDir)/bin is a special value that expands out to the path when
-#      the command is run from withing VS.
-#
-#   CUDA_NVCC_FLAGS
-#   CUDA_NVCC_FLAGS_<CONFIG>
-#   -- Additional NVCC command line arguments.  NOTE: multiple arguments must be
-#      semi-colon delimited (e.g. --compiler-options;-Wall)
-#
-#   CUDA_PROPAGATE_HOST_FLAGS (Default ON)
-#   -- Set to ON to propagate CMAKE_{C,CXX}_FLAGS and their configuration
-#      dependent counterparts (e.g. CMAKE_C_FLAGS_DEBUG) automatically to the
-#      host compiler through nvcc's -Xcompiler flag.  This helps make the
-#      generated host code match the rest of the system better.  Sometimes
-#      certain flags give nvcc problems, and this will help you turn the flag
-#      propagation off.  This does not affect the flags supplied directly to nvcc
-#      via CUDA_NVCC_FLAGS or through the OPTION flags specified through
-#      CUDA_ADD_LIBRARY, CUDA_ADD_EXECUTABLE, or CUDA_WRAP_SRCS.  Flags used for
-#      shared library compilation are not affected by this flag.
-#
-#   CUDA_SEPARABLE_COMPILATION (Default OFF)
-#   -- If set this will enable separable compilation for all CUDA runtime object
-#      files.  If used outside of CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY
-#      (e.g. calling CUDA_WRAP_SRCS directly),
-#      CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME and
-#      CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS should be called.
-#
-#   CUDA_VERBOSE_BUILD (Default OFF)
-#   -- Set to ON to see all the commands used when building the CUDA file.  When
-#      using a Makefile generator the value defaults to VERBOSE (run make
-#      VERBOSE=1 to see output), although setting CUDA_VERBOSE_BUILD to ON will
-#      always print the output.
-#
-# The script creates the following macros (in alphebetical order)::
-#
-#   CUDA_ADD_CUFFT_TO_TARGET( cuda_target )
-#   -- Adds the cufft library to the target (can be any target).  Handles whether
-#      you are in emulation mode or not.
-#
-#   CUDA_ADD_CUBLAS_TO_TARGET( cuda_target )
-#   -- Adds the cublas library to the target (can be any target).  Handles
-#      whether you are in emulation mode or not.
-#
-#   CUDA_ADD_EXECUTABLE( cuda_target file0 file1 ...
-#                        [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
-#   -- Creates an executable "cuda_target" which is made up of the files
-#      specified.  All of the non CUDA C files are compiled using the standard
-#      build rules specified by CMAKE and the cuda files are compiled to object
-#      files using nvcc and the host compiler.  In addition CUDA_INCLUDE_DIRS is
-#      added automatically to include_directories().  Some standard CMake target
-#      calls can be used on the target after calling this macro
-#      (e.g. set_target_properties and target_link_libraries), but setting
-#      properties that adjust compilation flags will not affect code compiled by
-#      nvcc.  Such flags should be modified before calling CUDA_ADD_EXECUTABLE,
-#      CUDA_ADD_LIBRARY or CUDA_WRAP_SRCS.
-#
-#   CUDA_ADD_LIBRARY( cuda_target file0 file1 ...
-#                     [STATIC | SHARED | MODULE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
-#   -- Same as CUDA_ADD_EXECUTABLE except that a library is created.
-#
-#   CUDA_BUILD_CLEAN_TARGET()
-#   -- Creates a convience target that deletes all the dependency files
-#      generated.  You should make clean after running this target to ensure the
-#      dependency files get regenerated.
-#
-#   CUDA_COMPILE( generated_files file0 file1 ... [STATIC | SHARED | MODULE]
-#                 [OPTIONS ...] )
-#   -- Returns a list of generated files from the input source files to be used
-#      with ADD_LIBRARY or ADD_EXECUTABLE.
-#
-#   CUDA_COMPILE_PTX( generated_files file0 file1 ... [OPTIONS ...] )
-#   -- Returns a list of PTX files generated from the input source files.
-#
-#   CUDA_COMPILE_FATBIN( generated_files file0 file1 ... [OPTIONS ...] )
-#   -- Returns a list of FATBIN files generated from the input source files.
-#
-#   CUDA_COMPILE_CUBIN( generated_files file0 file1 ... [OPTIONS ...] )
-#   -- Returns a list of CUBIN files generated from the input source files.
-#
-#   CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME( output_file_var
-#                                                        cuda_target
-#                                                        object_files )
-#   -- Compute the name of the intermediate link file used for separable
-#      compilation.  This file name is typically passed into
-#      CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS.  output_file_var is produced
-#      based on cuda_target the list of objects files that need separable
-#      compilation as specified by object_files.  If the object_files list is
-#      empty, then output_file_var will be empty.  This function is called
-#      automatically for CUDA_ADD_LIBRARY and CUDA_ADD_EXECUTABLE.  Note that
-#      this is a function and not a macro.
-#
-#   CUDA_INCLUDE_DIRECTORIES( path0 path1 ... )
-#   -- Sets the directories that should be passed to nvcc
-#      (e.g. nvcc -Ipath0 -Ipath1 ... ). These paths usually contain other .cu
-#      files.
-#
-#
-#
-#   CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS( output_file_var cuda_target
-#                                            nvcc_flags object_files)
-#
-#   -- Generates the link object required by separable compilation from the given
-#      object files.  This is called automatically for CUDA_ADD_EXECUTABLE and
-#      CUDA_ADD_LIBRARY, but can be called manually when using CUDA_WRAP_SRCS
-#      directly.  When called from CUDA_ADD_LIBRARY or CUDA_ADD_EXECUTABLE the
-#      nvcc_flags passed in are the same as the flags passed in via the OPTIONS
-#      argument.  The only nvcc flag added automatically is the bitness flag as
-#      specified by CUDA_64_BIT_DEVICE_CODE.  Note that this is a function
-#      instead of a macro.
-#
-#   CUDA_WRAP_SRCS ( cuda_target format generated_files file0 file1 ...
-#                    [STATIC | SHARED | MODULE] [OPTIONS ...] )
-#   -- This is where all the magic happens.  CUDA_ADD_EXECUTABLE,
-#      CUDA_ADD_LIBRARY, CUDA_COMPILE, and CUDA_COMPILE_PTX all call this
-#      function under the hood.
-#
-#      Given the list of files (file0 file1 ... fileN) this macro generates
-#      custom commands that generate either PTX or linkable objects (use "PTX" or
-#      "OBJ" for the format argument to switch).  Files that don't end with .cu
-#      or have the HEADER_FILE_ONLY property are ignored.
-#
-#      The arguments passed in after OPTIONS are extra command line options to
-#      give to nvcc.  You can also specify per configuration options by
-#      specifying the name of the configuration followed by the options.  General
-#      options must preceed configuration specific options.  Not all
-#      configurations need to be specified, only the ones provided will be used.
-#
-#         OPTIONS -DFLAG=2 "-DFLAG_OTHER=space in flag"
-#         DEBUG -g
-#         RELEASE --use_fast_math
-#         RELWITHDEBINFO --use_fast_math;-g
-#         MINSIZEREL --use_fast_math
-#
-#      For certain configurations (namely VS generating object files with
-#      CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE set to ON), no generated file will
-#      be produced for the given cuda file.  This is because when you add the
-#      cuda file to Visual Studio it knows that this file produces an object file
-#      and will link in the resulting object file automatically.
-#
-#      This script will also generate a separate cmake script that is used at
-#      build time to invoke nvcc.  This is for several reasons.
-#
-#        1. nvcc can return negative numbers as return values which confuses
-#        Visual Studio into thinking that the command succeeded.  The script now
-#        checks the error codes and produces errors when there was a problem.
-#
-#        2. nvcc has been known to not delete incomplete results when it
-#        encounters problems.  This confuses build systems into thinking the
-#        target was generated when in fact an unusable file exists.  The script
-#        now deletes the output files if there was an error.
-#
-#        3. By putting all the options that affect the build into a file and then
-#        make the build rule dependent on the file, the output files will be
-#        regenerated when the options change.
-#
-#      This script also looks at optional arguments STATIC, SHARED, or MODULE to
-#      determine when to target the object compilation for a shared library.
-#      BUILD_SHARED_LIBS is ignored in CUDA_WRAP_SRCS, but it is respected in
-#      CUDA_ADD_LIBRARY.  On some systems special flags are added for building
-#      objects intended for shared libraries.  A preprocessor macro,
-#      <target_name>_EXPORTS is defined when a shared library compilation is
-#      detected.
-#
-#      Flags passed into add_definitions with -D or /D are passed along to nvcc.
-#
-#
-#
-# The script defines the following variables::
-#
-#   CUDA_VERSION_MAJOR    -- The major version of cuda as reported by nvcc.
-#   CUDA_VERSION_MINOR    -- The minor version.
-#   CUDA_VERSION
-#   CUDA_VERSION_STRING   -- CUDA_VERSION_MAJOR.CUDA_VERSION_MINOR
-#
-#   CUDA_TOOLKIT_ROOT_DIR -- Path to the CUDA Toolkit (defined if not set).
-#   CUDA_SDK_ROOT_DIR     -- Path to the CUDA SDK.  Use this to find files in the
-#                            SDK.  This script will not directly support finding
-#                            specific libraries or headers, as that isn't
-#                            supported by NVIDIA.  If you want to change
-#                            libraries when the path changes see the
-#                            FindCUDA.cmake script for an example of how to clear
-#                            these variables.  There are also examples of how to
-#                            use the CUDA_SDK_ROOT_DIR to locate headers or
-#                            libraries, if you so choose (at your own risk).
-#   CUDA_INCLUDE_DIRS     -- Include directory for cuda headers.  Added automatically
-#                            for CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY.
-#   CUDA_LIBRARIES        -- Cuda RT library.
-#   CUDA_CUFFT_LIBRARIES  -- Device or emulation library for the Cuda FFT
-#                            implementation (alternative to:
-#                            CUDA_ADD_CUFFT_TO_TARGET macro)
-#   CUDA_CUBLAS_LIBRARIES -- Device or emulation library for the Cuda BLAS
-#                            implementation (alterative to:
-#                            CUDA_ADD_CUBLAS_TO_TARGET macro).
-#   CUDA_cupti_LIBRARY    -- CUDA Profiling Tools Interface library.
-#                            Only available for CUDA version 4.0+.
-#   CUDA_curand_LIBRARY   -- CUDA Random Number Generation library.
-#                            Only available for CUDA version 3.2+.
-#   CUDA_cusolver_LIBRARY -- CUDA Direct Solver library.
-#                            Only available for CUDA version 7.0+.
-#   CUDA_cusparse_LIBRARY -- CUDA Sparse Matrix library.
-#                            Only available for CUDA version 3.2+.
-#   CUDA_npp_LIBRARY      -- NVIDIA Performance Primitives lib.
-#                            Only available for CUDA version 4.0+.
-#   CUDA_nppc_LIBRARY     -- NVIDIA Performance Primitives lib (core).
-#                            Only available for CUDA version 5.5+.
-#   CUDA_nppi_LIBRARY     -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 5.5+.
-#   CUDA_npps_LIBRARY     -- NVIDIA Performance Primitives lib (signal processing).
-#                            Only available for CUDA version 5.5+.
-#   CUDA_nvcuvenc_LIBRARY -- CUDA Video Encoder library.
-#                            Only available for CUDA version 3.2+.
-#                            Windows only.
-#   CUDA_nvcuvid_LIBRARY  -- CUDA Video Decoder library.
-#                            Only available for CUDA version 3.2+.
-#                            Windows only.
-#
-
-#   James Bigler, NVIDIA Corp (nvidia.com - jbigler)
-#   Abe Stephens, SCI Institute -- http://www.sci.utah.edu/~abe/FindCuda.html
-#
-#   Copyright (c) 2008 - 2009 NVIDIA Corporation.  All rights reserved.
-#
-#   Copyright (c) 2007-2009
-#   Scientific Computing and Imaging Institute, University of Utah
-#
-#   This code is licensed under the MIT License.  See the FindCUDA.cmake script
-#   for the text of the license.
-
-# The MIT License
-#
-# License for the specific language governing rights and limitations under
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-# DEALINGS IN THE SOFTWARE.
-#
-###############################################################################
-
-# FindCUDA.cmake
-
-# This macro helps us find the location of helper files we will need the full path to
-macro(CUDA_FIND_HELPER_FILE _name _extension)
-  set(_full_name "${_name}.${_extension}")
-  # CMAKE_CURRENT_LIST_FILE contains the full path to the file currently being
-  # processed.  Using this variable, we can pull out the current path, and
-  # provide a way to get access to the other files we need local to here.
-  get_filename_component(CMAKE_CURRENT_LIST_DIR "${CMAKE_CURRENT_LIST_FILE}" PATH)
-  set(CUDA_${_name} "${CMAKE_CURRENT_LIST_DIR}/FindCUDA/${_full_name}")
-  if(NOT EXISTS "${CUDA_${_name}}")
-    set(error_message "${_full_name} not found in ${CMAKE_CURRENT_LIST_DIR}/FindCUDA")
-    if(CUDA_FIND_REQUIRED)
-      message(FATAL_ERROR "${error_message}")
-    else()
-      if(NOT CUDA_FIND_QUIETLY)
-        message(STATUS "${error_message}")
-      endif()
-    endif()
-  endif()
-  # Set this variable as internal, so the user isn't bugged with it.
-  set(CUDA_${_name} ${CUDA_${_name}} CACHE INTERNAL "Location of ${_full_name}" FORCE)
-endmacro()
-
-#####################################################################
-## CUDA_INCLUDE_NVCC_DEPENDENCIES
-##
-
-# So we want to try and include the dependency file if it exists.  If
-# it doesn't exist then we need to create an empty one, so we can
-# include it.
-
-# If it does exist, then we need to check to see if all the files it
-# depends on exist.  If they don't then we should clear the dependency
-# file and regenerate it later.  This covers the case where a header
-# file has disappeared or moved.
-
-macro(CUDA_INCLUDE_NVCC_DEPENDENCIES dependency_file)
-  set(CUDA_NVCC_DEPEND)
-  set(CUDA_NVCC_DEPEND_REGENERATE FALSE)
-
-
-  # Include the dependency file.  Create it first if it doesn't exist .  The
-  # INCLUDE puts a dependency that will force CMake to rerun and bring in the
-  # new info when it changes.  DO NOT REMOVE THIS (as I did and spent a few
-  # hours figuring out why it didn't work.
-  if(NOT EXISTS ${dependency_file})
-    file(WRITE ${dependency_file} "#FindCUDA.cmake generated file.  Do not edit.\n")
-  endif()
-  # Always include this file to force CMake to run again next
-  # invocation and rebuild the dependencies.
-  #message("including dependency_file = ${dependency_file}")
-  include(${dependency_file})
-
-  # Now we need to verify the existence of all the included files
-  # here.  If they aren't there we need to just blank this variable and
-  # make the file regenerate again.
-#   if(DEFINED CUDA_NVCC_DEPEND)
-#     message("CUDA_NVCC_DEPEND set")
-#   else()
-#     message("CUDA_NVCC_DEPEND NOT set")
-#   endif()
-  if(CUDA_NVCC_DEPEND)
-    #message("CUDA_NVCC_DEPEND found")
-    foreach(f ${CUDA_NVCC_DEPEND})
-      # message("searching for ${f}")
-      if(NOT EXISTS ${f})
-        #message("file ${f} not found")
-        set(CUDA_NVCC_DEPEND_REGENERATE TRUE)
-      endif()
-    endforeach()
-  else()
-    #message("CUDA_NVCC_DEPEND false")
-    # No dependencies, so regenerate the file.
-    set(CUDA_NVCC_DEPEND_REGENERATE TRUE)
-  endif()
-
-  #message("CUDA_NVCC_DEPEND_REGENERATE = ${CUDA_NVCC_DEPEND_REGENERATE}")
-  # No incoming dependencies, so we need to generate them.  Make the
-  # output depend on the dependency file itself, which should cause the
-  # rule to re-run.
-  if(CUDA_NVCC_DEPEND_REGENERATE)
-    set(CUDA_NVCC_DEPEND ${dependency_file})
-    #message("Generating an empty dependency_file: ${dependency_file}")
-    file(WRITE ${dependency_file} "#FindCUDA.cmake generated file.  Do not edit.\n")
-  endif()
-
-endmacro()
-
-###############################################################################
-###############################################################################
-# Setup variables' defaults
-###############################################################################
-###############################################################################
-
-# Allow the user to specify if the device code is supposed to be 32 or 64 bit.
-if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-  set(CUDA_64_BIT_DEVICE_CODE_DEFAULT ON)
-else()
-  set(CUDA_64_BIT_DEVICE_CODE_DEFAULT OFF)
-endif()
-option(CUDA_64_BIT_DEVICE_CODE "Compile device code in 64 bit mode" ${CUDA_64_BIT_DEVICE_CODE_DEFAULT})
-
-# Attach the build rule to the source file in VS.  This option
-option(CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE "Attach the build rule to the CUDA source file.  Enable only when the CUDA source file is added to at most one target." ON)
-
-# Prints out extra information about the cuda file during compilation
-option(CUDA_BUILD_CUBIN "Generate and parse .cubin files in Device mode." OFF)
-
-# Set whether we are using emulation or device mode.
-option(CUDA_BUILD_EMULATION "Build in Emulation mode" OFF)
-
-# Where to put the generated output.
-set(CUDA_GENERATED_OUTPUT_DIR "" CACHE PATH "Directory to put all the output files.  If blank it will default to the CMAKE_CURRENT_BINARY_DIR")
-
-# Parse HOST_COMPILATION mode.
-option(CUDA_HOST_COMPILATION_CPP "Generated file extension" ON)
-
-# Extra user settable flags
-set(CUDA_NVCC_FLAGS "" CACHE STRING "Semi-colon delimit multiple arguments.")
-
-if(CMAKE_GENERATOR MATCHES "Visual Studio")
-  set(CUDA_HOST_COMPILER "$(VCInstallDir)bin" CACHE FILEPATH "Host side compiler used by NVCC")
-else()
-  # Using cc which is symlink to clang may let NVCC think it is GCC and issue
-  # unhandled -dumpspecs option to clang. Also in case neither
-  # CMAKE_C_COMPILER is defined (project does not use C language) nor
-  # CUDA_HOST_COMPILER is specified manually we should skip -ccbin and let
-  # nvcc use its own default C compiler.
-  if(DEFINED CMAKE_C_COMPILER AND NOT DEFINED CUDA_HOST_COMPILER)
-    get_filename_component(c_compiler_realpath "${CMAKE_C_COMPILER}" REALPATH)
-  else()
-    set(c_compiler_realpath "")
-  endif()
-  set(CUDA_HOST_COMPILER "${c_compiler_realpath}" CACHE FILEPATH "Host side compiler used by NVCC")
-endif()
-
-# Propagate the host flags to the host compiler via -Xcompiler
-option(CUDA_PROPAGATE_HOST_FLAGS "Propage C/CXX_FLAGS and friends to the host compiler via -Xcompile" ON)
-
-# Enable CUDA_SEPARABLE_COMPILATION
-option(CUDA_SEPARABLE_COMPILATION "Compile CUDA objects with separable compilation enabled.  Requires CUDA 5.0+" OFF)
-
-# Specifies whether the commands used when compiling the .cu file will be printed out.
-option(CUDA_VERBOSE_BUILD "Print out the commands run while compiling the CUDA source file.  With the Makefile generator this defaults to VERBOSE variable specified on the command line, but can be forced on with this option." OFF)
-
-mark_as_advanced(
-  CUDA_64_BIT_DEVICE_CODE
-  CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE
-  CUDA_GENERATED_OUTPUT_DIR
-  CUDA_HOST_COMPILATION_CPP
-  CUDA_NVCC_FLAGS
-  CUDA_PROPAGATE_HOST_FLAGS
-  CUDA_BUILD_CUBIN
-  CUDA_BUILD_EMULATION
-  CUDA_VERBOSE_BUILD
-  CUDA_SEPARABLE_COMPILATION
-  )
-
-# Makefile and similar generators don't define CMAKE_CONFIGURATION_TYPES, so we
-# need to add another entry for the CMAKE_BUILD_TYPE.  We also need to add the
-# standerd set of 4 build types (Debug, MinSizeRel, Release, and RelWithDebInfo)
-# for completeness.  We need run this loop in order to accomodate the addition
-# of extra configuration types.  Duplicate entries will be removed by
-# REMOVE_DUPLICATES.
-set(CUDA_configuration_types ${CMAKE_CONFIGURATION_TYPES} ${CMAKE_BUILD_TYPE} Debug MinSizeRel Release RelWithDebInfo)
-list(REMOVE_DUPLICATES CUDA_configuration_types)
-foreach(config ${CUDA_configuration_types})
-    string(TOUPPER ${config} config_upper)
-    set(CUDA_NVCC_FLAGS_${config_upper} "" CACHE STRING "Semi-colon delimit multiple arguments.")
-    mark_as_advanced(CUDA_NVCC_FLAGS_${config_upper})
-endforeach()
-
-###############################################################################
-###############################################################################
-# Locate CUDA, Set Build Type, etc.
-###############################################################################
-###############################################################################
-
-macro(cuda_unset_include_and_libraries)
-  unset(CUDA_TOOLKIT_INCLUDE CACHE)
-  unset(CUDA_CUDART_LIBRARY CACHE)
-  unset(CUDA_CUDA_LIBRARY CACHE)
-  # Make sure you run this before you unset CUDA_VERSION.
-  if(CUDA_VERSION VERSION_EQUAL "3.0")
-    # This only existed in the 3.0 version of the CUDA toolkit
-    unset(CUDA_CUDARTEMU_LIBRARY CACHE)
-  endif()
-  unset(CUDA_cupti_LIBRARY CACHE)
-  unset(CUDA_cublas_LIBRARY CACHE)
-  unset(CUDA_cublasemu_LIBRARY CACHE)
-  unset(CUDA_cufft_LIBRARY CACHE)
-  unset(CUDA_cufftemu_LIBRARY CACHE)
-  unset(CUDA_curand_LIBRARY CACHE)
-  unset(CUDA_cusolver_LIBRARY CACHE)
-  unset(CUDA_cusparse_LIBRARY CACHE)
-  unset(CUDA_npp_LIBRARY CACHE)
-  unset(CUDA_nppc_LIBRARY CACHE)
-  unset(CUDA_nppi_LIBRARY CACHE)
-  unset(CUDA_npps_LIBRARY CACHE)
-  unset(CUDA_nvcuvenc_LIBRARY CACHE)
-  unset(CUDA_nvcuvid_LIBRARY CACHE)
-endmacro()
-
-# Check to see if the CUDA_TOOLKIT_ROOT_DIR and CUDA_SDK_ROOT_DIR have changed,
-# if they have then clear the cache variables, so that will be detected again.
-if(NOT "${CUDA_TOOLKIT_ROOT_DIR}" STREQUAL "${CUDA_TOOLKIT_ROOT_DIR_INTERNAL}")
-  unset(CUDA_TOOLKIT_TARGET_DIR CACHE)
-  unset(CUDA_NVCC_EXECUTABLE CACHE)
-  unset(CUDA_VERSION CACHE)
-  cuda_unset_include_and_libraries()
-endif()
-
-if(NOT "${CUDA_TOOLKIT_TARGET_DIR}" STREQUAL "${CUDA_TOOLKIT_TARGET_DIR_INTERNAL}")
-  cuda_unset_include_and_libraries()
-endif()
-
-if(NOT "${CUDA_SDK_ROOT_DIR}" STREQUAL "${CUDA_SDK_ROOT_DIR_INTERNAL}")
-  # No specific variables to catch.  Use this kind of code before calling
-  # find_package(CUDA) to clean up any variables that may depend on this path.
-
-  #   unset(MY_SPECIAL_CUDA_SDK_INCLUDE_DIR CACHE)
-  #   unset(MY_SPECIAL_CUDA_SDK_LIBRARY CACHE)
-endif()
-
-# Search for the cuda distribution.
-if(NOT CUDA_TOOLKIT_ROOT_DIR)
-
-  # Search in the CUDA_BIN_PATH first.
-  find_path(CUDA_TOOLKIT_ROOT_DIR
-    NAMES nvcc nvcc.exe
-    PATHS
-      ENV CUDA_PATH
-      ENV CUDA_BIN_PATH
-    PATH_SUFFIXES bin bin64
-    DOC "Toolkit location."
-    NO_DEFAULT_PATH
-    )
-  # Now search default paths
-  find_path(CUDA_TOOLKIT_ROOT_DIR
-    NAMES nvcc nvcc.exe
-    PATHS /usr/local/bin
-          /usr/local/cuda/bin
-    DOC "Toolkit location."
-    )
-
-  if (CUDA_TOOLKIT_ROOT_DIR)
-    string(REGEX REPLACE "[/\\\\]?bin[64]*[/\\\\]?$" "" CUDA_TOOLKIT_ROOT_DIR ${CUDA_TOOLKIT_ROOT_DIR})
-    # We need to force this back into the cache.
-    set(CUDA_TOOLKIT_ROOT_DIR ${CUDA_TOOLKIT_ROOT_DIR} CACHE PATH "Toolkit location." FORCE)
-  endif()
-  if (NOT EXISTS ${CUDA_TOOLKIT_ROOT_DIR})
-    if(CUDA_FIND_REQUIRED)
-      message(FATAL_ERROR "Specify CUDA_TOOLKIT_ROOT_DIR")
-    elseif(NOT CUDA_FIND_QUIETLY)
-      message("CUDA_TOOLKIT_ROOT_DIR not found or specified")
-    endif()
-  endif ()
-endif ()
-
-# CUDA_NVCC_EXECUTABLE
-find_program(CUDA_NVCC_EXECUTABLE
-  NAMES nvcc
-  PATHS "${CUDA_TOOLKIT_ROOT_DIR}"
-  ENV CUDA_PATH
-  ENV CUDA_BIN_PATH
-  PATH_SUFFIXES bin bin64
-  NO_DEFAULT_PATH
-  )
-# Search default search paths, after we search our own set of paths.
-find_program(CUDA_NVCC_EXECUTABLE nvcc)
-mark_as_advanced(CUDA_NVCC_EXECUTABLE)
-
-if(CUDA_NVCC_EXECUTABLE AND NOT CUDA_VERSION)
-  # Compute the version.
-  execute_process (COMMAND ${CUDA_NVCC_EXECUTABLE} "--version" OUTPUT_VARIABLE NVCC_OUT)
-  string(REGEX REPLACE ".*release ([0-9]+)\\.([0-9]+).*" "\\1" CUDA_VERSION_MAJOR ${NVCC_OUT})
-  string(REGEX REPLACE ".*release ([0-9]+)\\.([0-9]+).*" "\\2" CUDA_VERSION_MINOR ${NVCC_OUT})
-  set(CUDA_VERSION "${CUDA_VERSION_MAJOR}.${CUDA_VERSION_MINOR}" CACHE STRING "Version of CUDA as computed from nvcc.")
-  mark_as_advanced(CUDA_VERSION)
-else()
-  # Need to set these based off of the cached value
-  string(REGEX REPLACE "([0-9]+)\\.([0-9]+).*" "\\1" CUDA_VERSION_MAJOR "${CUDA_VERSION}")
-  string(REGEX REPLACE "([0-9]+)\\.([0-9]+).*" "\\2" CUDA_VERSION_MINOR "${CUDA_VERSION}")
-endif()
-
-# Always set this convenience variable
-set(CUDA_VERSION_STRING "${CUDA_VERSION}")
-
-# Support for arm cross compilation with CUDA 5.5
-if(CUDA_VERSION VERSION_GREATER "5.0" AND CMAKE_CROSSCOMPILING AND CMAKE_SYSTEM_PROCESSOR MATCHES "arm" AND EXISTS "${CUDA_TOOLKIT_ROOT_DIR}/targets/armv7-linux-gnueabihf")
-  set(CUDA_TOOLKIT_TARGET_DIR "${CUDA_TOOLKIT_ROOT_DIR}/targets/armv7-linux-gnueabihf" CACHE PATH "Toolkit target location.")
-else()
-  set(CUDA_TOOLKIT_TARGET_DIR "${CUDA_TOOLKIT_ROOT_DIR}" CACHE PATH "Toolkit target location.")
-endif()
-mark_as_advanced(CUDA_TOOLKIT_TARGET_DIR)
-
-# Target CPU architecture
-if(CUDA_VERSION VERSION_GREATER "5.0" AND CMAKE_CROSSCOMPILING AND CMAKE_SYSTEM_PROCESSOR MATCHES "arm")
-  set(_cuda_target_cpu_arch_initial "ARM")
-else()
-  set(_cuda_target_cpu_arch_initial "")
-endif()
-set(CUDA_TARGET_CPU_ARCH ${_cuda_target_cpu_arch_initial} CACHE STRING "Specify the name of the class of CPU architecture for which the input files must be compiled.")
-mark_as_advanced(CUDA_TARGET_CPU_ARCH)
-
-# CUDA_TOOLKIT_INCLUDE
-find_path(CUDA_TOOLKIT_INCLUDE
-  device_functions.h # Header included in toolkit
-  PATHS "${CUDA_TOOLKIT_TARGET_DIR}" "${CUDA_TOOLKIT_ROOT_DIR}"
-  ENV CUDA_PATH
-  ENV CUDA_INC_PATH
-  PATH_SUFFIXES include
-  NO_DEFAULT_PATH
-  )
-# Search default search paths, after we search our own set of paths.
-find_path(CUDA_TOOLKIT_INCLUDE device_functions.h)
-mark_as_advanced(CUDA_TOOLKIT_INCLUDE)
-
-# Set the user list of include dir to nothing to initialize it.
-set (CUDA_NVCC_INCLUDE_ARGS_USER "")
-set (CUDA_INCLUDE_DIRS ${CUDA_TOOLKIT_INCLUDE})
-
-macro(cuda_find_library_local_first_with_path_ext _var _names _doc _path_ext )
-  if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-    # CUDA 3.2+ on Windows moved the library directories, so we need the new
-    # and old paths.
-    set(_cuda_64bit_lib_dir "${_path_ext}lib/x64" "${_path_ext}lib64" "${_path_ext}libx64" )
-  endif()
-  # CUDA 3.2+ on Windows moved the library directories, so we need to new
-  # (lib/Win32) and the old path (lib).
-  find_library(${_var}
-    NAMES ${_names}
-    PATHS "${CUDA_TOOLKIT_TARGET_DIR}" "${CUDA_TOOLKIT_ROOT_DIR}"
-    ENV CUDA_PATH
-    ENV CUDA_LIB_PATH
-    PATH_SUFFIXES ${_cuda_64bit_lib_dir} "${_path_ext}lib/Win32" "${_path_ext}lib" "${_path_ext}libWin32"
-    DOC ${_doc}
-    NO_DEFAULT_PATH
-    )
-  # Search default search paths, after we search our own set of paths.
-  find_library(${_var}
-    NAMES ${_names}
-    PATHS "/usr/lib/nvidia-current"
-    DOC ${_doc}
-    )
-endmacro()
-
-macro(cuda_find_library_local_first _var _names _doc)
-  cuda_find_library_local_first_with_path_ext( "${_var}" "${_names}" "${_doc}" "" )
-endmacro()
-
-macro(find_library_local_first _var _names _doc )
-  cuda_find_library_local_first( "${_var}" "${_names}" "${_doc}" "" )
-endmacro()
-
-
-# CUDA_LIBRARIES
-cuda_find_library_local_first(CUDA_CUDART_LIBRARY cudart "\"cudart\" library")
-if(CUDA_VERSION VERSION_EQUAL "3.0")
-  # The cudartemu library only existed for the 3.0 version of CUDA.
-  cuda_find_library_local_first(CUDA_CUDARTEMU_LIBRARY cudartemu "\"cudartemu\" library")
-  mark_as_advanced(
-    CUDA_CUDARTEMU_LIBRARY
-    )
-endif()
-
-# CUPTI library showed up in cuda toolkit 4.0
-if(NOT CUDA_VERSION VERSION_LESS "4.0")
-  cuda_find_library_local_first_with_path_ext(CUDA_cupti_LIBRARY cupti "\"cupti\" library" "extras/CUPTI/")
-  mark_as_advanced(CUDA_cupti_LIBRARY)
-endif()
-
-# If we are using emulation mode and we found the cudartemu library then use
-# that one instead of cudart.
-if(CUDA_BUILD_EMULATION AND CUDA_CUDARTEMU_LIBRARY)
-  set(CUDA_LIBRARIES ${CUDA_CUDARTEMU_LIBRARY})
-else()
-  set(CUDA_LIBRARIES ${CUDA_CUDART_LIBRARY})
-endif()
-
-# 1.1 toolkit on linux doesn't appear to have a separate library on
-# some platforms.
-cuda_find_library_local_first(CUDA_CUDA_LIBRARY cuda "\"cuda\" library (older versions only).")
-
-mark_as_advanced(
-  CUDA_CUDA_LIBRARY
-  CUDA_CUDART_LIBRARY
-  )
-
-#######################
-# Look for some of the toolkit helper libraries
-macro(FIND_CUDA_HELPER_LIBS _name)
-  cuda_find_library_local_first(CUDA_${_name}_LIBRARY ${_name} "\"${_name}\" library")
-  mark_as_advanced(CUDA_${_name}_LIBRARY)
-endmacro()
-
-#######################
-# Disable emulation for v3.1 onward
-if(CUDA_VERSION VERSION_GREATER "3.0")
-  if(CUDA_BUILD_EMULATION)
-    message(FATAL_ERROR "CUDA_BUILD_EMULATION is not supported in version 3.1 and onwards.  You must disable it to proceed.  You have version ${CUDA_VERSION}.")
-  endif()
-endif()
-
-# Search for additional CUDA toolkit libraries.
-if(CUDA_VERSION VERSION_LESS "3.1")
-  # Emulation libraries aren't available in version 3.1 onward.
-  find_cuda_helper_libs(cufftemu)
-  find_cuda_helper_libs(cublasemu)
-endif()
-find_cuda_helper_libs(cufft)
-find_cuda_helper_libs(cublas)
-if(NOT CUDA_VERSION VERSION_LESS "3.2")
-  # cusparse showed up in version 3.2
-  find_cuda_helper_libs(cusparse)
-  find_cuda_helper_libs(curand)
-  if (WIN32)
-    find_cuda_helper_libs(nvcuvenc)
-    find_cuda_helper_libs(nvcuvid)
-  endif()
-endif()
-if(CUDA_VERSION VERSION_GREATER "5.0")
-  # In CUDA 5.5 NPP was splitted onto 3 separate libraries.
-  find_cuda_helper_libs(nppc)
-  find_cuda_helper_libs(nppi)
-  find_cuda_helper_libs(npps)
-  set(CUDA_npp_LIBRARY "${CUDA_nppc_LIBRARY};${CUDA_nppi_LIBRARY};${CUDA_npps_LIBRARY}")
-elseif(NOT CUDA_VERSION VERSION_LESS "4.0")
-  find_cuda_helper_libs(npp)
-endif()
-if(NOT CUDA_VERSION VERSION_LESS "7.0")
-  # cusolver showed up in version 7.0
-  find_cuda_helper_libs(cusolver)
-endif()
-
-if (CUDA_BUILD_EMULATION)
-  set(CUDA_CUFFT_LIBRARIES ${CUDA_cufftemu_LIBRARY})
-  set(CUDA_CUBLAS_LIBRARIES ${CUDA_cublasemu_LIBRARY})
-else()
-  set(CUDA_CUFFT_LIBRARIES ${CUDA_cufft_LIBRARY})
-  set(CUDA_CUBLAS_LIBRARIES ${CUDA_cublas_LIBRARY})
-endif()
-
-########################
-# Look for the SDK stuff.  As of CUDA 3.0 NVSDKCUDA_ROOT has been replaced with
-# NVSDKCOMPUTE_ROOT with the old CUDA C contents moved into the C subdirectory
-find_path(CUDA_SDK_ROOT_DIR common/inc/cutil.h
- HINTS
-  "$ENV{NVSDKCOMPUTE_ROOT}/C"
-  ENV NVSDKCUDA_ROOT
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\NVIDIA Corporation\\Installed Products\\NVIDIA SDK 10\\Compute;InstallDir]"
- PATHS
-  "/Developer/GPU\ Computing/C"
-  )
-
-# Keep the CUDA_SDK_ROOT_DIR first in order to be able to override the
-# environment variables.
-set(CUDA_SDK_SEARCH_PATH
-  "${CUDA_SDK_ROOT_DIR}"
-  "${CUDA_TOOLKIT_ROOT_DIR}/local/NVSDK0.2"
-  "${CUDA_TOOLKIT_ROOT_DIR}/NVSDK0.2"
-  "${CUDA_TOOLKIT_ROOT_DIR}/NV_CUDA_SDK"
-  "$ENV{HOME}/NVIDIA_CUDA_SDK"
-  "$ENV{HOME}/NVIDIA_CUDA_SDK_MACOSX"
-  "/Developer/CUDA"
-  )
-
-# Example of how to find an include file from the CUDA_SDK_ROOT_DIR
-
-# find_path(CUDA_CUT_INCLUDE_DIR
-#   cutil.h
-#   PATHS ${CUDA_SDK_SEARCH_PATH}
-#   PATH_SUFFIXES "common/inc"
-#   DOC "Location of cutil.h"
-#   NO_DEFAULT_PATH
-#   )
-# # Now search system paths
-# find_path(CUDA_CUT_INCLUDE_DIR cutil.h DOC "Location of cutil.h")
-
-# mark_as_advanced(CUDA_CUT_INCLUDE_DIR)
-
-
-# Example of how to find a library in the CUDA_SDK_ROOT_DIR
-
-# # cutil library is called cutil64 for 64 bit builds on windows.  We don't want
-# # to get these confused, so we are setting the name based on the word size of
-# # the build.
-
-# if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-#   set(cuda_cutil_name cutil64)
-# else()
-#   set(cuda_cutil_name cutil32)
-# endif()
-
-# find_library(CUDA_CUT_LIBRARY
-#   NAMES cutil ${cuda_cutil_name}
-#   PATHS ${CUDA_SDK_SEARCH_PATH}
-#   # The new version of the sdk shows up in common/lib, but the old one is in lib
-#   PATH_SUFFIXES "common/lib" "lib"
-#   DOC "Location of cutil library"
-#   NO_DEFAULT_PATH
-#   )
-# # Now search system paths
-# find_library(CUDA_CUT_LIBRARY NAMES cutil ${cuda_cutil_name} DOC "Location of cutil library")
-# mark_as_advanced(CUDA_CUT_LIBRARY)
-# set(CUDA_CUT_LIBRARIES ${CUDA_CUT_LIBRARY})
-
-
-
-#############################
-# Check for required components
-set(CUDA_FOUND TRUE)
-
-set(CUDA_TOOLKIT_ROOT_DIR_INTERNAL "${CUDA_TOOLKIT_ROOT_DIR}" CACHE INTERNAL
-  "This is the value of the last time CUDA_TOOLKIT_ROOT_DIR was set successfully." FORCE)
-set(CUDA_TOOLKIT_TARGET_DIR_INTERNAL "${CUDA_TOOLKIT_TARGET_DIR}" CACHE INTERNAL
-  "This is the value of the last time CUDA_TOOLKIT_TARGET_DIR was set successfully." FORCE)
-set(CUDA_SDK_ROOT_DIR_INTERNAL "${CUDA_SDK_ROOT_DIR}" CACHE INTERNAL
-  "This is the value of the last time CUDA_SDK_ROOT_DIR was set successfully." FORCE)
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(CUDA
-  REQUIRED_VARS
-    CUDA_TOOLKIT_ROOT_DIR
-    CUDA_NVCC_EXECUTABLE
-    CUDA_INCLUDE_DIRS
-    CUDA_CUDART_LIBRARY
-  VERSION_VAR
-    CUDA_VERSION
-  )
-
-
-
-###############################################################################
-###############################################################################
-# Macros
-###############################################################################
-###############################################################################
-
-###############################################################################
-# Add include directories to pass to the nvcc command.
-macro(CUDA_INCLUDE_DIRECTORIES)
-  foreach(dir ${ARGN})
-    list(APPEND CUDA_NVCC_INCLUDE_ARGS_USER -I${dir})
-  endforeach()
-endmacro()
-
-
-##############################################################################
-cuda_find_helper_file(parse_cubin cmake)
-cuda_find_helper_file(make2cmake cmake)
-cuda_find_helper_file(run_nvcc cmake)
-
-##############################################################################
-# Separate the OPTIONS out from the sources
-#
-macro(CUDA_GET_SOURCES_AND_OPTIONS _sources _cmake_options _options)
-  set( ${_sources} )
-  set( ${_cmake_options} )
-  set( ${_options} )
-  set( _found_options FALSE )
-  foreach(arg ${ARGN})
-    if("x${arg}" STREQUAL "xOPTIONS")
-      set( _found_options TRUE )
-    elseif(
-        "x${arg}" STREQUAL "xWIN32" OR
-        "x${arg}" STREQUAL "xMACOSX_BUNDLE" OR
-        "x${arg}" STREQUAL "xEXCLUDE_FROM_ALL" OR
-        "x${arg}" STREQUAL "xSTATIC" OR
-        "x${arg}" STREQUAL "xSHARED" OR
-        "x${arg}" STREQUAL "xMODULE"
-        )
-      list(APPEND ${_cmake_options} ${arg})
-    else()
-      if ( _found_options )
-        list(APPEND ${_options} ${arg})
-      else()
-        # Assume this is a file
-        list(APPEND ${_sources} ${arg})
-      endif()
-    endif()
-  endforeach()
-endmacro()
-
-##############################################################################
-# Parse the OPTIONS from ARGN and set the variables prefixed by _option_prefix
-#
-macro(CUDA_PARSE_NVCC_OPTIONS _option_prefix)
-  set( _found_config )
-  foreach(arg ${ARGN})
-    # Determine if we are dealing with a perconfiguration flag
-    foreach(config ${CUDA_configuration_types})
-      string(TOUPPER ${config} config_upper)
-      if (arg STREQUAL "${config_upper}")
-        set( _found_config _${arg})
-        # Set arg to nothing to keep it from being processed further
-        set( arg )
-      endif()
-    endforeach()
-
-    if ( arg )
-      list(APPEND ${_option_prefix}${_found_config} "${arg}")
-    endif()
-  endforeach()
-endmacro()
-
-##############################################################################
-# Helper to add the include directory for CUDA only once
-function(CUDA_ADD_CUDA_INCLUDE_ONCE)
-  get_directory_property(_include_directories INCLUDE_DIRECTORIES)
-  set(_add TRUE)
-  if(_include_directories)
-    foreach(dir ${_include_directories})
-      if("${dir}" STREQUAL "${CUDA_INCLUDE_DIRS}")
-        set(_add FALSE)
-      endif()
-    endforeach()
-  endif()
-  if(_add)
-    include_directories(${CUDA_INCLUDE_DIRS})
-  endif()
-endfunction()
-
-function(CUDA_BUILD_SHARED_LIBRARY shared_flag)
-  set(cmake_args ${ARGN})
-  # If SHARED, MODULE, or STATIC aren't already in the list of arguments, then
-  # add SHARED or STATIC based on the value of BUILD_SHARED_LIBS.
-  list(FIND cmake_args SHARED _cuda_found_SHARED)
-  list(FIND cmake_args MODULE _cuda_found_MODULE)
-  list(FIND cmake_args STATIC _cuda_found_STATIC)
-  if( _cuda_found_SHARED GREATER -1 OR
-      _cuda_found_MODULE GREATER -1 OR
-      _cuda_found_STATIC GREATER -1)
-    set(_cuda_build_shared_libs)
-  else()
-    if (BUILD_SHARED_LIBS)
-      set(_cuda_build_shared_libs SHARED)
-    else()
-      set(_cuda_build_shared_libs STATIC)
-    endif()
-  endif()
-  set(${shared_flag} ${_cuda_build_shared_libs} PARENT_SCOPE)
-endfunction()
-
-##############################################################################
-# Helper to avoid clashes of files with the same basename but different paths.
-# This doesn't attempt to do exactly what CMake internals do, which is to only
-# add this path when there is a conflict, since by the time a second collision
-# in names is detected it's already too late to fix the first one.  For
-# consistency sake the relative path will be added to all files.
-function(CUDA_COMPUTE_BUILD_PATH path build_path)
-  #message("CUDA_COMPUTE_BUILD_PATH([${path}] ${build_path})")
-  # Only deal with CMake style paths from here on out
-  file(TO_CMAKE_PATH "${path}" bpath)
-  if (IS_ABSOLUTE "${bpath}")
-    # Absolute paths are generally unnessary, especially if something like
-    # file(GLOB_RECURSE) is used to pick up the files.
-
-    string(FIND "${bpath}" "${CMAKE_CURRENT_BINARY_DIR}" _binary_dir_pos)
-    if (_binary_dir_pos EQUAL 0)
-      file(RELATIVE_PATH bpath "${CMAKE_CURRENT_BINARY_DIR}" "${bpath}")
-    else()
-      file(RELATIVE_PATH bpath "${CMAKE_CURRENT_SOURCE_DIR}" "${bpath}")
-    endif()
-  endif()
-
-  # This recipe is from cmLocalGenerator::CreateSafeUniqueObjectFileName in the
-  # CMake source.
-
-  # Remove leading /
-  string(REGEX REPLACE "^[/]+" "" bpath "${bpath}")
-  # Avoid absolute paths by removing ':'
-  string(REPLACE ":" "_" bpath "${bpath}")
-  # Avoid relative paths that go up the tree
-  string(REPLACE "../" "__/" bpath "${bpath}")
-  # Avoid spaces
-  string(REPLACE " " "_" bpath "${bpath}")
-
-  # Strip off the filename.  I wait until here to do it, since removin the
-  # basename can make a path that looked like path/../basename turn into
-  # path/.. (notice the trailing slash).
-  get_filename_component(bpath "${bpath}" PATH)
-
-  set(${build_path} "${bpath}" PARENT_SCOPE)
-  #message("${build_path} = ${bpath}")
-endfunction()
-
-##############################################################################
-# This helper macro populates the following variables and setups up custom
-# commands and targets to invoke the nvcc compiler to generate C or PTX source
-# dependent upon the format parameter.  The compiler is invoked once with -M
-# to generate a dependency file and a second time with -cuda or -ptx to generate
-# a .cpp or .ptx file.
-# INPUT:
-#   cuda_target         - Target name
-#   format              - PTX, CUBIN, FATBIN or OBJ
-#   FILE1 .. FILEN      - The remaining arguments are the sources to be wrapped.
-#   OPTIONS             - Extra options to NVCC
-# OUTPUT:
-#   generated_files     - List of generated files
-##############################################################################
-##############################################################################
-
-macro(CUDA_WRAP_SRCS cuda_target format generated_files)
-
-  # If CMake doesn't support separable compilation, complain
-  if(CUDA_SEPARABLE_COMPILATION AND CMAKE_VERSION VERSION_LESS "2.8.10.1")
-    message(SEND_ERROR "CUDA_SEPARABLE_COMPILATION isn't supported for CMake versions less than 2.8.10.1")
-  endif()
-
-  # Set up all the command line flags here, so that they can be overridden on a per target basis.
-
-  set(nvcc_flags "")
-
-  # Emulation if the card isn't present.
-  if (CUDA_BUILD_EMULATION)
-    # Emulation.
-    set(nvcc_flags ${nvcc_flags} --device-emulation -D_DEVICEEMU -g)
-  else()
-    # Device mode.  No flags necessary.
-  endif()
-
-  if(CUDA_HOST_COMPILATION_CPP)
-    set(CUDA_C_OR_CXX CXX)
-  else()
-    if(CUDA_VERSION VERSION_LESS "3.0")
-      set(nvcc_flags ${nvcc_flags} --host-compilation C)
-    else()
-      message(WARNING "--host-compilation flag is deprecated in CUDA version >= 3.0.  Removing --host-compilation C flag" )
-    endif()
-    set(CUDA_C_OR_CXX C)
-  endif()
-
-  set(generated_extension ${CMAKE_${CUDA_C_OR_CXX}_OUTPUT_EXTENSION})
-
-  if(CUDA_64_BIT_DEVICE_CODE)
-    set(nvcc_flags ${nvcc_flags} -m64)
-  else()
-    set(nvcc_flags ${nvcc_flags} -m32)
-  endif()
-
-  if(CUDA_TARGET_CPU_ARCH)
-    set(nvcc_flags ${nvcc_flags} "--target-cpu-architecture=${CUDA_TARGET_CPU_ARCH}")
-  endif()
-
-  # This needs to be passed in at this stage, because VS needs to fill out the
-  # value of VCInstallDir from within VS.  Note that CCBIN is only used if
-  # -ccbin or --compiler-bindir isn't used and CUDA_HOST_COMPILER matches
-  # $(VCInstallDir)/bin.
-  if(CMAKE_GENERATOR MATCHES "Visual Studio")
-    set(ccbin_flags -D "\"CCBIN:PATH=$(VCInstallDir)bin\"" )
-  else()
-    set(ccbin_flags)
-  endif()
-
-  # Figure out which configure we will use and pass that in as an argument to
-  # the script.  We need to defer the decision until compilation time, because
-  # for VS projects we won't know if we are making a debug or release build
-  # until build time.
-  if(CMAKE_GENERATOR MATCHES "Visual Studio")
-    set( CUDA_build_configuration "$(ConfigurationName)" )
-  else()
-    set( CUDA_build_configuration "${CMAKE_BUILD_TYPE}")
-  endif()
-
-  # Initialize our list of includes with the user ones followed by the CUDA system ones.
-  set(CUDA_NVCC_INCLUDE_ARGS ${CUDA_NVCC_INCLUDE_ARGS_USER} "-I${CUDA_INCLUDE_DIRS}")
-  # Get the include directories for this directory and use them for our nvcc command.
-  # Remove duplicate entries which may be present since include_directories
-  # in CMake >= 2.8.8 does not remove them.
-  get_directory_property(CUDA_NVCC_INCLUDE_DIRECTORIES INCLUDE_DIRECTORIES)
-  list(REMOVE_DUPLICATES CUDA_NVCC_INCLUDE_DIRECTORIES)
-  if(CUDA_NVCC_INCLUDE_DIRECTORIES)
-    foreach(dir ${CUDA_NVCC_INCLUDE_DIRECTORIES})
-      list(APPEND CUDA_NVCC_INCLUDE_ARGS -I${dir})
-    endforeach()
-  endif()
-
-  # Reset these variables
-  set(CUDA_WRAP_OPTION_NVCC_FLAGS)
-  foreach(config ${CUDA_configuration_types})
-    string(TOUPPER ${config} config_upper)
-    set(CUDA_WRAP_OPTION_NVCC_FLAGS_${config_upper})
-  endforeach()
-
-  CUDA_GET_SOURCES_AND_OPTIONS(_cuda_wrap_sources _cuda_wrap_cmake_options _cuda_wrap_options ${ARGN})
-  CUDA_PARSE_NVCC_OPTIONS(CUDA_WRAP_OPTION_NVCC_FLAGS ${_cuda_wrap_options})
-
-  # Figure out if we are building a shared library.  BUILD_SHARED_LIBS is
-  # respected in CUDA_ADD_LIBRARY.
-  set(_cuda_build_shared_libs FALSE)
-  # SHARED, MODULE
-  list(FIND _cuda_wrap_cmake_options SHARED _cuda_found_SHARED)
-  list(FIND _cuda_wrap_cmake_options MODULE _cuda_found_MODULE)
-  if(_cuda_found_SHARED GREATER -1 OR _cuda_found_MODULE GREATER -1)
-    set(_cuda_build_shared_libs TRUE)
-  endif()
-  # STATIC
-  list(FIND _cuda_wrap_cmake_options STATIC _cuda_found_STATIC)
-  if(_cuda_found_STATIC GREATER -1)
-    set(_cuda_build_shared_libs FALSE)
-  endif()
-
-  # CUDA_HOST_FLAGS
-  if(_cuda_build_shared_libs)
-    # If we are setting up code for a shared library, then we need to add extra flags for
-    # compiling objects for shared libraries.
-    set(CUDA_HOST_SHARED_FLAGS ${CMAKE_SHARED_LIBRARY_${CUDA_C_OR_CXX}_FLAGS})
-  else()
-    set(CUDA_HOST_SHARED_FLAGS)
-  endif()
-  # Only add the CMAKE_{C,CXX}_FLAGS if we are propagating host flags.  We
-  # always need to set the SHARED_FLAGS, though.
-  if(CUDA_PROPAGATE_HOST_FLAGS)
-    set(_cuda_host_flags "set(CMAKE_HOST_FLAGS ${CMAKE_${CUDA_C_OR_CXX}_FLAGS} ${CUDA_HOST_SHARED_FLAGS})")
-  else()
-    set(_cuda_host_flags "set(CMAKE_HOST_FLAGS ${CUDA_HOST_SHARED_FLAGS})")
-  endif()
-
-  set(_cuda_nvcc_flags_config "# Build specific configuration flags")
-  # Loop over all the configuration types to generate appropriate flags for run_nvcc.cmake
-  foreach(config ${CUDA_configuration_types})
-    string(TOUPPER ${config} config_upper)
-    # CMAKE_FLAGS are strings and not lists.  By not putting quotes around CMAKE_FLAGS
-    # we convert the strings to lists (like we want).
-
-    if(CUDA_PROPAGATE_HOST_FLAGS)
-      # nvcc chokes on -g3 in versions previous to 3.0, so replace it with -g
-      set(_cuda_fix_g3 FALSE)
-
-      if(CMAKE_COMPILER_IS_GNUCC)
-        if (CUDA_VERSION VERSION_LESS  "3.0" OR
-            CUDA_VERSION VERSION_EQUAL "4.1" OR
-            CUDA_VERSION VERSION_EQUAL "4.2"
-            )
-          set(_cuda_fix_g3 TRUE)
-        endif()
-      endif()
-      if(_cuda_fix_g3)
-        string(REPLACE "-g3" "-g" _cuda_C_FLAGS "${CMAKE_${CUDA_C_OR_CXX}_FLAGS_${config_upper}}")
-      else()
-        set(_cuda_C_FLAGS "${CMAKE_${CUDA_C_OR_CXX}_FLAGS_${config_upper}}")
-      endif()
-
-      set(_cuda_host_flags "${_cuda_host_flags}\nset(CMAKE_HOST_FLAGS_${config_upper} ${_cuda_C_FLAGS})")
-    endif()
-
-    # Note that if we ever want CUDA_NVCC_FLAGS_<CONFIG> to be string (instead of a list
-    # like it is currently), we can remove the quotes around the
-    # ${CUDA_NVCC_FLAGS_${config_upper}} variable like the CMAKE_HOST_FLAGS_<CONFIG> variable.
-    set(_cuda_nvcc_flags_config "${_cuda_nvcc_flags_config}\nset(CUDA_NVCC_FLAGS_${config_upper} ${CUDA_NVCC_FLAGS_${config_upper}} ;; ${CUDA_WRAP_OPTION_NVCC_FLAGS_${config_upper}})")
-  endforeach()
-
-  # Get the list of definitions from the directory property
-  get_directory_property(CUDA_NVCC_DEFINITIONS COMPILE_DEFINITIONS)
-  if(CUDA_NVCC_DEFINITIONS)
-    foreach(_definition ${CUDA_NVCC_DEFINITIONS})
-      list(APPEND nvcc_flags "-D${_definition}")
-    endforeach()
-  endif()
-
-  if(_cuda_build_shared_libs)
-    list(APPEND nvcc_flags "-D${cuda_target}_EXPORTS")
-  endif()
-
-  # Reset the output variable
-  set(_cuda_wrap_generated_files "")
-
-  # Iterate over the macro arguments and create custom
-  # commands for all the .cu files.
-  foreach(file ${ARGN})
-    # Ignore any file marked as a HEADER_FILE_ONLY
-    get_source_file_property(_is_header ${file} HEADER_FILE_ONLY)
-    if(${file} MATCHES "\\.cu$" AND NOT _is_header)
-
-      # Allow per source file overrides of the format.
-      get_source_file_property(_cuda_source_format ${file} CUDA_SOURCE_PROPERTY_FORMAT)
-      if(NOT _cuda_source_format)
-        set(_cuda_source_format ${format})
-      endif()
-
-      if( ${_cuda_source_format} MATCHES "OBJ")
-        set( cuda_compile_to_external_module OFF )
-      else()
-        set( cuda_compile_to_external_module ON )
-        if( ${_cuda_source_format} MATCHES "PTX" )
-          set( cuda_compile_to_external_module_type "ptx" )
-        elseif( ${_cuda_source_format} MATCHES "CUBIN")
-          set( cuda_compile_to_external_module_type "cubin" )
-        elseif( ${_cuda_source_format} MATCHES "FATBIN")
-          set( cuda_compile_to_external_module_type "fatbin" )
-        else()
-          message( FATAL_ERROR "Invalid format flag passed to CUDA_WRAP_SRCS for file '${file}': '${_cuda_source_format}'.  Use OBJ, PTX, CUBIN or FATBIN.")
-        endif()
-      endif()
-
-      if(cuda_compile_to_external_module)
-        # Don't use any of the host compilation flags for PTX targets.
-        set(CUDA_HOST_FLAGS)
-        set(CUDA_NVCC_FLAGS_CONFIG)
-      else()
-        set(CUDA_HOST_FLAGS ${_cuda_host_flags})
-        set(CUDA_NVCC_FLAGS_CONFIG ${_cuda_nvcc_flags_config})
-      endif()
-
-      # Determine output directory
-      cuda_compute_build_path("${file}" cuda_build_path)
-      set(cuda_compile_intermediate_directory "${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/${cuda_target}.dir/${cuda_build_path}")
-      if(CUDA_GENERATED_OUTPUT_DIR)
-        set(cuda_compile_output_dir "${CUDA_GENERATED_OUTPUT_DIR}")
-      else()
-        if ( cuda_compile_to_external_module )
-          set(cuda_compile_output_dir "${CMAKE_CURRENT_BINARY_DIR}")
-        else()
-          set(cuda_compile_output_dir "${cuda_compile_intermediate_directory}")
-        endif()
-      endif()
-
-      # Add a custom target to generate a c or ptx file. ######################
-
-      get_filename_component( basename ${file} NAME )
-      if( cuda_compile_to_external_module )
-        set(generated_file_path "${cuda_compile_output_dir}")
-        set(generated_file_basename "${cuda_target}_generated_${basename}.${cuda_compile_to_external_module_type}")
-        set(format_flag "-${cuda_compile_to_external_module_type}")
-        file(MAKE_DIRECTORY "${cuda_compile_output_dir}")
-      else()
-        set(generated_file_path "${cuda_compile_output_dir}/${CMAKE_CFG_INTDIR}")
-        set(generated_file_basename "${cuda_target}_generated_${basename}${generated_extension}")
-        if(CUDA_SEPARABLE_COMPILATION)
-          set(format_flag "-dc")
-        else()
-          set(format_flag "-c")
-        endif()
-      endif()
-
-      # Set all of our file names.  Make sure that whatever filenames that have
-      # generated_file_path in them get passed in through as a command line
-      # argument, so that the ${CMAKE_CFG_INTDIR} gets expanded at run time
-      # instead of configure time.
-      set(generated_file "${generated_file_path}/${generated_file_basename}")
-      set(cmake_dependency_file "${cuda_compile_intermediate_directory}/${generated_file_basename}.depend")
-      set(NVCC_generated_dependency_file "${cuda_compile_intermediate_directory}/${generated_file_basename}.NVCC-depend")
-      set(generated_cubin_file "${generated_file_path}/${generated_file_basename}.cubin.txt")
-      set(custom_target_script "${cuda_compile_intermediate_directory}/${generated_file_basename}.cmake")
-
-      # Setup properties for obj files:
-      if( NOT cuda_compile_to_external_module )
-        set_source_files_properties("${generated_file}"
-          PROPERTIES
-          EXTERNAL_OBJECT true # This is an object file not to be compiled, but only be linked.
-          )
-      endif()
-
-      # Don't add CMAKE_CURRENT_SOURCE_DIR if the path is already an absolute path.
-      get_filename_component(file_path "${file}" PATH)
-      if(IS_ABSOLUTE "${file_path}")
-        set(source_file "${file}")
-      else()
-        set(source_file "${CMAKE_CURRENT_SOURCE_DIR}/${file}")
-      endif()
-
-      if( NOT cuda_compile_to_external_module AND CUDA_SEPARABLE_COMPILATION)
-        list(APPEND ${cuda_target}_SEPARABLE_COMPILATION_OBJECTS "${generated_file}")
-      endif()
-
-      # Bring in the dependencies.  Creates a variable CUDA_NVCC_DEPEND #######
-      cuda_include_nvcc_dependencies(${cmake_dependency_file})
-
-      # Convience string for output ###########################################
-      if(CUDA_BUILD_EMULATION)
-        set(cuda_build_type "Emulation")
-      else()
-        set(cuda_build_type "Device")
-      endif()
-
-      # Build the NVCC made dependency file ###################################
-      set(build_cubin OFF)
-      if ( NOT CUDA_BUILD_EMULATION AND CUDA_BUILD_CUBIN )
-         if ( NOT cuda_compile_to_external_module )
-           set ( build_cubin ON )
-         endif()
-      endif()
-
-      # Configure the build script
-      configure_file("${CUDA_run_nvcc}" "${custom_target_script}" @ONLY)
-
-      # So if a user specifies the same cuda file as input more than once, you
-      # can have bad things happen with dependencies.  Here we check an option
-      # to see if this is the behavior they want.
-      if(CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE)
-        set(main_dep MAIN_DEPENDENCY ${source_file})
-      else()
-        set(main_dep DEPENDS ${source_file})
-      endif()
-
-      if(CUDA_VERBOSE_BUILD)
-        set(verbose_output ON)
-      elseif(CMAKE_GENERATOR MATCHES "Makefiles")
-        set(verbose_output "$(VERBOSE)")
-      else()
-        set(verbose_output OFF)
-      endif()
-
-      # Create up the comment string
-      file(RELATIVE_PATH generated_file_relative_path "${CMAKE_BINARY_DIR}" "${generated_file}")
-      if(cuda_compile_to_external_module)
-        set(cuda_build_comment_string "Building NVCC ${cuda_compile_to_external_module_type} file ${generated_file_relative_path}")
-      else()
-        set(cuda_build_comment_string "Building NVCC (${cuda_build_type}) object ${generated_file_relative_path}")
-      endif()
-
-      # Build the generated file and dependency file ##########################
-      add_custom_command(
-        OUTPUT ${generated_file}
-        # These output files depend on the source_file and the contents of cmake_dependency_file
-        ${main_dep}
-        DEPENDS ${CUDA_NVCC_DEPEND}
-        DEPENDS ${custom_target_script}
-        # Make sure the output directory exists before trying to write to it.
-        COMMAND ${CMAKE_COMMAND} -E make_directory "${generated_file_path}"
-        COMMAND ${CMAKE_COMMAND} ARGS
-          -D verbose:BOOL=${verbose_output}
-          ${ccbin_flags}
-          -D build_configuration:STRING=${CUDA_build_configuration}
-          -D "generated_file:STRING=${generated_file}"
-          -D "generated_cubin_file:STRING=${generated_cubin_file}"
-          -P "${custom_target_script}"
-        WORKING_DIRECTORY "${cuda_compile_intermediate_directory}"
-        COMMENT "${cuda_build_comment_string}"
-        )
-
-      # Make sure the build system knows the file is generated.
-      set_source_files_properties(${generated_file} PROPERTIES GENERATED TRUE)
-
-      list(APPEND _cuda_wrap_generated_files ${generated_file})
-
-      # Add the other files that we want cmake to clean on a cleanup ##########
-      list(APPEND CUDA_ADDITIONAL_CLEAN_FILES "${cmake_dependency_file}")
-      list(REMOVE_DUPLICATES CUDA_ADDITIONAL_CLEAN_FILES)
-      set(CUDA_ADDITIONAL_CLEAN_FILES ${CUDA_ADDITIONAL_CLEAN_FILES} CACHE INTERNAL "List of intermediate files that are part of the cuda dependency scanning.")
-
-    endif()
-  endforeach()
-
-  # Set the return parameter
-  set(${generated_files} ${_cuda_wrap_generated_files})
-endmacro()
-
-function(_cuda_get_important_host_flags important_flags flag_string)
-  if(CMAKE_GENERATOR MATCHES "Visual Studio")
-    string(REGEX MATCHALL "/M[DT][d]?" flags ${flag_string})
-    list(APPEND ${important_flags} ${flags})
-  else()
-    string(REGEX MATCHALL "-fPIC" flags ${flag_string})
-    list(APPEND ${important_flags} ${flags})
-  endif()
-  set(${important_flags} ${${important_flags}} PARENT_SCOPE)
-endfunction()
-
-###############################################################################
-###############################################################################
-# Separable Compilation Link
-###############################################################################
-###############################################################################
-
-# Compute the filename to be used by CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS
-function(CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME output_file_var cuda_target object_files)
-  if (object_files)
-    set(generated_extension ${CMAKE_${CUDA_C_OR_CXX}_OUTPUT_EXTENSION})
-    set(output_file "${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/${cuda_target}.dir/${CMAKE_CFG_INTDIR}/${cuda_target}_intermediate_link${generated_extension}")
-  else()
-    set(output_file)
-  endif()
-
-  set(${output_file_var} "${output_file}" PARENT_SCOPE)
-endfunction()
-
-# Setup the build rule for the separable compilation intermediate link file.
-function(CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS output_file cuda_target options object_files)
-  if (object_files)
-
-    set_source_files_properties("${output_file}"
-      PROPERTIES
-      EXTERNAL_OBJECT TRUE # This is an object file not to be compiled, but only
-                           # be linked.
-      GENERATED TRUE       # This file is generated during the build
-      )
-
-    # For now we are ignoring all the configuration specific flags.
-    set(nvcc_flags)
-    CUDA_PARSE_NVCC_OPTIONS(nvcc_flags ${options})
-    if(CUDA_64_BIT_DEVICE_CODE)
-      list(APPEND nvcc_flags -m64)
-    else()
-      list(APPEND nvcc_flags -m32)
-    endif()
-    # If -ccbin, --compiler-bindir has been specified, don't do anything.  Otherwise add it here.
-    list( FIND nvcc_flags "-ccbin" ccbin_found0 )
-    list( FIND nvcc_flags "--compiler-bindir" ccbin_found1 )
-    if( ccbin_found0 LESS 0 AND ccbin_found1 LESS 0 AND CUDA_HOST_COMPILER )
-      list(APPEND nvcc_flags -ccbin "\"${CUDA_HOST_COMPILER}\"")
-    endif()
-
-    # Create a list of flags specified by CUDA_NVCC_FLAGS_${CONFIG} and CMAKE_${CUDA_C_OR_CXX}_FLAGS*
-    set(config_specific_flags)
-    set(flags)
-    foreach(config ${CUDA_configuration_types})
-      string(TOUPPER ${config} config_upper)
-      # Add config specific flags
-      foreach(f ${CUDA_NVCC_FLAGS_${config_upper}})
-        list(APPEND config_specific_flags $<$<CONFIG:${config}>:${f}>)
-      endforeach()
-      set(important_host_flags)
-      _cuda_get_important_host_flags(important_host_flags ${CMAKE_${CUDA_C_OR_CXX}_FLAGS_${config_upper}})
-      foreach(f ${important_host_flags})
-        list(APPEND flags $<$<CONFIG:${config}>:-Xcompiler> $<$<CONFIG:${config}>:${f}>)
-      endforeach()
-    endforeach()
-    # Add CMAKE_${CUDA_C_OR_CXX}_FLAGS
-    set(important_host_flags)
-    _cuda_get_important_host_flags(important_host_flags ${CMAKE_${CUDA_C_OR_CXX}_FLAGS})
-    foreach(f ${important_host_flags})
-      list(APPEND flags -Xcompiler ${f})
-    endforeach()
-
-    # Add our general CUDA_NVCC_FLAGS with the configuration specifig flags
-    set(nvcc_flags ${CUDA_NVCC_FLAGS} ${config_specific_flags} ${nvcc_flags})
-
-    file(RELATIVE_PATH output_file_relative_path "${CMAKE_BINARY_DIR}" "${output_file}")
-
-    # Some generators don't handle the multiple levels of custom command
-    # dependencies correctly (obj1 depends on file1, obj2 depends on obj1), so
-    # we work around that issue by compiling the intermediate link object as a
-    # pre-link custom command in that situation.
-    set(do_obj_build_rule TRUE)
-    if (MSVC_VERSION GREATER 1599)
-      # VS 2010 and 2012 have this problem.  If future versions fix this issue,
-      # it should still work, it just won't be as nice as the other method.
-      set(do_obj_build_rule FALSE)
-    endif()
-
-    if (do_obj_build_rule)
-      add_custom_command(
-        OUTPUT ${output_file}
-        DEPENDS ${object_files}
-        COMMAND ${CUDA_NVCC_EXECUTABLE} ${nvcc_flags} -dlink ${object_files} -o ${output_file}
-        ${flags}
-        COMMENT "Building NVCC intermediate link file ${output_file_relative_path}"
-        )
-    else()
-      add_custom_command(
-        TARGET ${cuda_target}
-        PRE_LINK
-        COMMAND ${CMAKE_COMMAND} -E echo "Building NVCC intermediate link file ${output_file_relative_path}"
-        COMMAND ${CUDA_NVCC_EXECUTABLE} ${nvcc_flags} ${flags} -dlink ${object_files} -o "${output_file}"
-        )
-    endif()
- endif()
-endfunction()
-
-###############################################################################
-###############################################################################
-# ADD LIBRARY
-###############################################################################
-###############################################################################
-macro(CUDA_ADD_LIBRARY cuda_target)
-
-  CUDA_ADD_CUDA_INCLUDE_ONCE()
-
-  # Separate the sources from the options
-  CUDA_GET_SOURCES_AND_OPTIONS(_sources _cmake_options _options ${ARGN})
-  CUDA_BUILD_SHARED_LIBRARY(_cuda_shared_flag ${ARGN})
-  # Create custom commands and targets for each file.
-  CUDA_WRAP_SRCS( ${cuda_target} OBJ _generated_files ${_sources}
-    ${_cmake_options} ${_cuda_shared_flag}
-    OPTIONS ${_options} )
-
-  # Compute the file name of the intermedate link file used for separable
-  # compilation.
-  CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME(link_file ${cuda_target} "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
-
-  # Add the library.
-  add_library(${cuda_target} ${_cmake_options}
-    ${_generated_files}
-    ${_sources}
-    ${link_file}
-    )
-
-  # Add a link phase for the separable compilation if it has been enabled.  If
-  # it has been enabled then the ${cuda_target}_SEPARABLE_COMPILATION_OBJECTS
-  # variable will have been defined.
-  CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS("${link_file}" ${cuda_target} "${_options}" "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
-
-  target_link_libraries(${cuda_target}
-    ${CUDA_LIBRARIES}
-    )
-
-  # We need to set the linker language based on what the expected generated file
-  # would be. CUDA_C_OR_CXX is computed based on CUDA_HOST_COMPILATION_CPP.
-  set_target_properties(${cuda_target}
-    PROPERTIES
-    LINKER_LANGUAGE ${CUDA_C_OR_CXX}
-    )
-
-endmacro()
-
-
-###############################################################################
-###############################################################################
-# ADD EXECUTABLE
-###############################################################################
-###############################################################################
-macro(CUDA_ADD_EXECUTABLE cuda_target)
-
-  CUDA_ADD_CUDA_INCLUDE_ONCE()
-
-  # Separate the sources from the options
-  CUDA_GET_SOURCES_AND_OPTIONS(_sources _cmake_options _options ${ARGN})
-  # Create custom commands and targets for each file.
-  CUDA_WRAP_SRCS( ${cuda_target} OBJ _generated_files ${_sources} OPTIONS ${_options} )
-
-  # Compute the file name of the intermedate link file used for separable
-  # compilation.
-  CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME(link_file ${cuda_target} "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
-
-  # Add the library.
-  add_executable(${cuda_target} ${_cmake_options}
-    ${_generated_files}
-    ${_sources}
-    ${link_file}
-    )
-
-  # Add a link phase for the separable compilation if it has been enabled.  If
-  # it has been enabled then the ${cuda_target}_SEPARABLE_COMPILATION_OBJECTS
-  # variable will have been defined.
-  CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS("${link_file}" ${cuda_target} "${_options}" "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
-
-  target_link_libraries(${cuda_target}
-    ${CUDA_LIBRARIES}
-    )
-
-  # We need to set the linker language based on what the expected generated file
-  # would be. CUDA_C_OR_CXX is computed based on CUDA_HOST_COMPILATION_CPP.
-  set_target_properties(${cuda_target}
-    PROPERTIES
-    LINKER_LANGUAGE ${CUDA_C_OR_CXX}
-    )
-
-endmacro()
-
-
-###############################################################################
-###############################################################################
-# (Internal) helper for manually added cuda source files with specific targets
-###############################################################################
-###############################################################################
-macro(cuda_compile_base cuda_target format generated_files)
-
-  # Separate the sources from the options
-  CUDA_GET_SOURCES_AND_OPTIONS(_sources _cmake_options _options ${ARGN})
-  # Create custom commands and targets for each file.
-  CUDA_WRAP_SRCS( ${cuda_target} ${format} _generated_files ${_sources} ${_cmake_options}
-    OPTIONS ${_options} )
-
-  set( ${generated_files} ${_generated_files})
-
-endmacro()
-
-###############################################################################
-###############################################################################
-# CUDA COMPILE
-###############################################################################
-###############################################################################
-macro(CUDA_COMPILE generated_files)
-  cuda_compile_base(cuda_compile OBJ ${generated_files} ${ARGN})
-endmacro()
-
-###############################################################################
-###############################################################################
-# CUDA COMPILE PTX
-###############################################################################
-###############################################################################
-macro(CUDA_COMPILE_PTX generated_files)
-  cuda_compile_base(cuda_compile_ptx PTX ${generated_files} ${ARGN})
-endmacro()
-
-###############################################################################
-###############################################################################
-# CUDA COMPILE FATBIN
-###############################################################################
-###############################################################################
-macro(CUDA_COMPILE_FATBIN generated_files)
-  cuda_compile_base(cuda_compile_fatbin FATBIN ${generated_files} ${ARGN})
-endmacro()
-
-###############################################################################
-###############################################################################
-# CUDA COMPILE CUBIN
-###############################################################################
-###############################################################################
-macro(CUDA_COMPILE_CUBIN generated_files)
-  cuda_compile_base(cuda_compile_cubin CUBIN ${generated_files} ${ARGN})
-endmacro()
-
-
-###############################################################################
-###############################################################################
-# CUDA ADD CUFFT TO TARGET
-###############################################################################
-###############################################################################
-macro(CUDA_ADD_CUFFT_TO_TARGET target)
-  if (CUDA_BUILD_EMULATION)
-    target_link_libraries(${target} ${CUDA_cufftemu_LIBRARY})
-  else()
-    target_link_libraries(${target} ${CUDA_cufft_LIBRARY})
-  endif()
-endmacro()
-
-###############################################################################
-###############################################################################
-# CUDA ADD CUBLAS TO TARGET
-###############################################################################
-###############################################################################
-macro(CUDA_ADD_CUBLAS_TO_TARGET target)
-  if (CUDA_BUILD_EMULATION)
-    target_link_libraries(${target} ${CUDA_cublasemu_LIBRARY})
-  else()
-    target_link_libraries(${target} ${CUDA_cublas_LIBRARY})
-  endif()
-endmacro()
-
-###############################################################################
-###############################################################################
-# CUDA BUILD CLEAN TARGET
-###############################################################################
-###############################################################################
-macro(CUDA_BUILD_CLEAN_TARGET)
-  # Call this after you add all your CUDA targets, and you will get a convience
-  # target.  You should also make clean after running this target to get the
-  # build system to generate all the code again.
-
-  set(cuda_clean_target_name clean_cuda_depends)
-  if (CMAKE_GENERATOR MATCHES "Visual Studio")
-    string(TOUPPER ${cuda_clean_target_name} cuda_clean_target_name)
-  endif()
-  add_custom_target(${cuda_clean_target_name}
-    COMMAND ${CMAKE_COMMAND} -E remove ${CUDA_ADDITIONAL_CLEAN_FILES})
-
-  # Clear out the variable, so the next time we configure it will be empty.
-  # This is useful so that the files won't persist in the list after targets
-  # have been removed.
-  set(CUDA_ADDITIONAL_CLEAN_FILES "" CACHE INTERNAL "List of intermediate files that are part of the cuda dependency scanning.")
-endmacro()
diff --git a/share/cmake-3.2/Modules/FindCUDA/make2cmake.cmake b/share/cmake-3.2/Modules/FindCUDA/make2cmake.cmake
deleted file mode 100644
index c433fa8..0000000
--- a/share/cmake-3.2/Modules/FindCUDA/make2cmake.cmake
+++ /dev/null
@@ -1,92 +0,0 @@
-#  James Bigler, NVIDIA Corp (nvidia.com - jbigler)
-#  Abe Stephens, SCI Institute -- http://www.sci.utah.edu/~abe/FindCuda.html
-#
-#  Copyright (c) 2008 - 2009 NVIDIA Corporation.  All rights reserved.
-#
-#  Copyright (c) 2007-2009
-#  Scientific Computing and Imaging Institute, University of Utah
-#
-#  This code is licensed under the MIT License.  See the FindCUDA.cmake script
-#  for the text of the license.
-
-# The MIT License
-#
-# License for the specific language governing rights and limitations under
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-# DEALINGS IN THE SOFTWARE.
-#
-
-#######################################################################
-# This converts a file written in makefile syntax into one that can be included
-# by CMake.
-
-file(READ ${input_file} depend_text)
-
-if (NOT "${depend_text}" STREQUAL "")
-
-  # message("FOUND DEPENDS")
-
-  string(REPLACE "\\ " " " depend_text ${depend_text})
-
-  # This works for the nvcc -M generated dependency files.
-  string(REGEX REPLACE "^.* : " "" depend_text ${depend_text})
-  string(REGEX REPLACE "[ \\\\]*\n" ";" depend_text ${depend_text})
-
-  set(dependency_list "")
-
-  foreach(file ${depend_text})
-
-    string(REGEX REPLACE "^ +" "" file ${file})
-
-    # OK, now if we had a UNC path, nvcc has a tendency to only output the first '/'
-    # instead of '//'.  Here we will test to see if the file exists, if it doesn't then
-    # try to prepend another '/' to the path and test again.  If it still fails remove the
-    # path.
-
-    if(NOT EXISTS "${file}")
-      if (EXISTS "/${file}")
-        set(file "/${file}")
-      else()
-        message(WARNING " Removing non-existent dependency file: ${file}")
-        set(file "")
-      endif()
-    endif()
-
-    if(NOT IS_DIRECTORY "${file}")
-      # If softlinks start to matter, we should change this to REALPATH.  For now we need
-      # to flatten paths, because nvcc can generate stuff like /bin/../include instead of
-      # just /include.
-      get_filename_component(file_absolute "${file}" ABSOLUTE)
-      list(APPEND dependency_list "${file_absolute}")
-    endif()
-
-  endforeach()
-
-else()
-  # message("FOUND NO DEPENDS")
-endif()
-
-# Remove the duplicate entries and sort them.
-list(REMOVE_DUPLICATES dependency_list)
-list(SORT dependency_list)
-
-foreach(file ${dependency_list})
-  set(cuda_nvcc_depend "${cuda_nvcc_depend} \"${file}\"\n")
-endforeach()
-
-file(WRITE ${output_file} "# Generated by: make2cmake.cmake\nSET(CUDA_NVCC_DEPEND\n ${cuda_nvcc_depend})\n\n")
diff --git a/share/cmake-3.2/Modules/FindCUDA/run_nvcc.cmake b/share/cmake-3.2/Modules/FindCUDA/run_nvcc.cmake
deleted file mode 100644
index abdd307..0000000
--- a/share/cmake-3.2/Modules/FindCUDA/run_nvcc.cmake
+++ /dev/null
@@ -1,288 +0,0 @@
-#  James Bigler, NVIDIA Corp (nvidia.com - jbigler)
-#
-#  Copyright (c) 2008 - 2009 NVIDIA Corporation.  All rights reserved.
-#
-#  This code is licensed under the MIT License.  See the FindCUDA.cmake script
-#  for the text of the license.
-
-# The MIT License
-#
-# License for the specific language governing rights and limitations under
-# Permission is hereby granted, free of charge, to any person obtaining a
-# copy of this software and associated documentation files (the "Software"),
-# to deal in the Software without restriction, including without limitation
-# the rights to use, copy, modify, merge, publish, distribute, sublicense,
-# and/or sell copies of the Software, and to permit persons to whom the
-# Software is furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-# DEALINGS IN THE SOFTWARE.
-
-
-##########################################################################
-# This file runs the nvcc commands to produce the desired output file along with
-# the dependency file needed by CMake to compute dependencies.  In addition the
-# file checks the output of each command and if the command fails it deletes the
-# output files.
-
-# Input variables
-#
-# verbose:BOOL=<>          OFF: Be as quiet as possible (default)
-#                          ON : Describe each step
-#
-# build_configuration:STRING=<> Typically one of Debug, MinSizeRel, Release, or
-#                               RelWithDebInfo, but it should match one of the
-#                               entries in CUDA_HOST_FLAGS. This is the build
-#                               configuration used when compiling the code.  If
-#                               blank or unspecified Debug is assumed as this is
-#                               what CMake does.
-#
-# generated_file:STRING=<> File to generate.  This argument must be passed in.
-#
-# generated_cubin_file:STRING=<> File to generate.  This argument must be passed
-#                                                   in if build_cubin is true.
-
-if(NOT generated_file)
-  message(FATAL_ERROR "You must specify generated_file on the command line")
-endif()
-
-# Set these up as variables to make reading the generated file easier
-set(CMAKE_COMMAND "@CMAKE_COMMAND@") # path
-set(source_file "@source_file@") # path
-set(NVCC_generated_dependency_file "@NVCC_generated_dependency_file@") # path
-set(cmake_dependency_file "@cmake_dependency_file@") # path
-set(CUDA_make2cmake "@CUDA_make2cmake@") # path
-set(CUDA_parse_cubin "@CUDA_parse_cubin@") # path
-set(build_cubin @build_cubin@) # bool
-set(CUDA_HOST_COMPILER "@CUDA_HOST_COMPILER@") # path
-# We won't actually use these variables for now, but we need to set this, in
-# order to force this file to be run again if it changes.
-set(generated_file_path "@generated_file_path@") # path
-set(generated_file_internal "@generated_file@") # path
-set(generated_cubin_file_internal "@generated_cubin_file@") # path
-
-set(CUDA_NVCC_EXECUTABLE "@CUDA_NVCC_EXECUTABLE@") # path
-set(CUDA_NVCC_FLAGS @CUDA_NVCC_FLAGS@ ;; @CUDA_WRAP_OPTION_NVCC_FLAGS@) # list
-@CUDA_NVCC_FLAGS_CONFIG@
-set(nvcc_flags @nvcc_flags@) # list
-set(CUDA_NVCC_INCLUDE_ARGS "@CUDA_NVCC_INCLUDE_ARGS@") # list (needs to be in quotes to handle spaces properly).
-set(format_flag "@format_flag@") # string
-
-if(build_cubin AND NOT generated_cubin_file)
-  message(FATAL_ERROR "You must specify generated_cubin_file on the command line")
-endif()
-
-# This is the list of host compilation flags.  It C or CXX should already have
-# been chosen by FindCUDA.cmake.
-@CUDA_HOST_FLAGS@
-
-# Take the compiler flags and package them up to be sent to the compiler via -Xcompiler
-set(nvcc_host_compiler_flags "")
-# If we weren't given a build_configuration, use Debug.
-if(NOT build_configuration)
-  set(build_configuration Debug)
-endif()
-string(TOUPPER "${build_configuration}" build_configuration)
-#message("CUDA_NVCC_HOST_COMPILER_FLAGS = ${CUDA_NVCC_HOST_COMPILER_FLAGS}")
-foreach(flag ${CMAKE_HOST_FLAGS} ${CMAKE_HOST_FLAGS_${build_configuration}})
-  # Extra quotes are added around each flag to help nvcc parse out flags with spaces.
-  set(nvcc_host_compiler_flags "${nvcc_host_compiler_flags},\"${flag}\"")
-endforeach()
-if (nvcc_host_compiler_flags)
-  set(nvcc_host_compiler_flags "-Xcompiler" ${nvcc_host_compiler_flags})
-endif()
-#message("nvcc_host_compiler_flags = \"${nvcc_host_compiler_flags}\"")
-# Add the build specific configuration flags
-list(APPEND CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS_${build_configuration}})
-
-# Any -ccbin existing in CUDA_NVCC_FLAGS gets highest priority
-list( FIND CUDA_NVCC_FLAGS "-ccbin" ccbin_found0 )
-list( FIND CUDA_NVCC_FLAGS "--compiler-bindir" ccbin_found1 )
-if( ccbin_found0 LESS 0 AND ccbin_found1 LESS 0 AND CUDA_HOST_COMPILER )
-  if (CUDA_HOST_COMPILER STREQUAL "$(VCInstallDir)bin" AND DEFINED CCBIN)
-    set(CCBIN -ccbin "${CCBIN}")
-  else()
-    set(CCBIN -ccbin "${CUDA_HOST_COMPILER}")
-  endif()
-endif()
-
-# cuda_execute_process - Executes a command with optional command echo and status message.
-#
-#   status  - Status message to print if verbose is true
-#   command - COMMAND argument from the usual execute_process argument structure
-#   ARGN    - Remaining arguments are the command with arguments
-#
-#   CUDA_result - return value from running the command
-#
-# Make this a macro instead of a function, so that things like RESULT_VARIABLE
-# and other return variables are present after executing the process.
-macro(cuda_execute_process status command)
-  set(_command ${command})
-  if(NOT "x${_command}" STREQUAL "xCOMMAND")
-    message(FATAL_ERROR "Malformed call to cuda_execute_process.  Missing COMMAND as second argument. (command = ${command})")
-  endif()
-  if(verbose)
-    execute_process(COMMAND "${CMAKE_COMMAND}" -E echo -- ${status})
-    # Now we need to build up our command string.  We are accounting for quotes
-    # and spaces, anything else is left up to the user to fix if they want to
-    # copy and paste a runnable command line.
-    set(cuda_execute_process_string)
-    foreach(arg ${ARGN})
-      # If there are quotes, excape them, so they come through.
-      string(REPLACE "\"" "\\\"" arg ${arg})
-      # Args with spaces need quotes around them to get them to be parsed as a single argument.
-      if(arg MATCHES " ")
-        list(APPEND cuda_execute_process_string "\"${arg}\"")
-      else()
-        list(APPEND cuda_execute_process_string ${arg})
-      endif()
-    endforeach()
-    # Echo the command
-    execute_process(COMMAND ${CMAKE_COMMAND} -E echo ${cuda_execute_process_string})
-  endif()
-  # Run the command
-  execute_process(COMMAND ${ARGN} RESULT_VARIABLE CUDA_result )
-endmacro()
-
-# Delete the target file
-cuda_execute_process(
-  "Removing ${generated_file}"
-  COMMAND "${CMAKE_COMMAND}" -E remove "${generated_file}"
-  )
-
-# For CUDA 2.3 and below, -G -M doesn't work, so remove the -G flag
-# for dependency generation and hope for the best.
-set(depends_CUDA_NVCC_FLAGS "${CUDA_NVCC_FLAGS}")
-set(CUDA_VERSION @CUDA_VERSION@)
-if(CUDA_VERSION VERSION_LESS "3.0")
-  cmake_policy(PUSH)
-  # CMake policy 0007 NEW states that empty list elements are not
-  # ignored.  I'm just setting it to avoid the warning that's printed.
-  cmake_policy(SET CMP0007 NEW)
-  # Note that this will remove all occurances of -G.
-  list(REMOVE_ITEM depends_CUDA_NVCC_FLAGS "-G")
-  cmake_policy(POP)
-endif()
-
-# nvcc doesn't define __CUDACC__ for some reason when generating dependency files.  This
-# can cause incorrect dependencies when #including files based on this macro which is
-# defined in the generating passes of nvcc invokation.  We will go ahead and manually
-# define this for now until a future version fixes this bug.
-set(CUDACC_DEFINE -D__CUDACC__)
-
-# Generate the dependency file
-cuda_execute_process(
-  "Generating dependency file: ${NVCC_generated_dependency_file}"
-  COMMAND "${CUDA_NVCC_EXECUTABLE}"
-  -M
-  ${CUDACC_DEFINE}
-  "${source_file}"
-  -o "${NVCC_generated_dependency_file}"
-  ${CCBIN}
-  ${nvcc_flags}
-  ${nvcc_host_compiler_flags}
-  ${depends_CUDA_NVCC_FLAGS}
-  -DNVCC
-  ${CUDA_NVCC_INCLUDE_ARGS}
-  )
-
-if(CUDA_result)
-  message(FATAL_ERROR "Error generating ${generated_file}")
-endif()
-
-# Generate the cmake readable dependency file to a temp file.  Don't put the
-# quotes just around the filenames for the input_file and output_file variables.
-# CMake will pass the quotes through and not be able to find the file.
-cuda_execute_process(
-  "Generating temporary cmake readable file: ${cmake_dependency_file}.tmp"
-  COMMAND "${CMAKE_COMMAND}"
-  -D "input_file:FILEPATH=${NVCC_generated_dependency_file}"
-  -D "output_file:FILEPATH=${cmake_dependency_file}.tmp"
-  -P "${CUDA_make2cmake}"
-  )
-
-if(CUDA_result)
-  message(FATAL_ERROR "Error generating ${generated_file}")
-endif()
-
-# Copy the file if it is different
-cuda_execute_process(
-  "Copy if different ${cmake_dependency_file}.tmp to ${cmake_dependency_file}"
-  COMMAND "${CMAKE_COMMAND}" -E copy_if_different "${cmake_dependency_file}.tmp" "${cmake_dependency_file}"
-  )
-
-if(CUDA_result)
-  message(FATAL_ERROR "Error generating ${generated_file}")
-endif()
-
-# Delete the temporary file
-cuda_execute_process(
-  "Removing ${cmake_dependency_file}.tmp and ${NVCC_generated_dependency_file}"
-  COMMAND "${CMAKE_COMMAND}" -E remove "${cmake_dependency_file}.tmp" "${NVCC_generated_dependency_file}"
-  )
-
-if(CUDA_result)
-  message(FATAL_ERROR "Error generating ${generated_file}")
-endif()
-
-# Generate the code
-cuda_execute_process(
-  "Generating ${generated_file}"
-  COMMAND "${CUDA_NVCC_EXECUTABLE}"
-  "${source_file}"
-  ${format_flag} -o "${generated_file}"
-  ${CCBIN}
-  ${nvcc_flags}
-  ${nvcc_host_compiler_flags}
-  ${CUDA_NVCC_FLAGS}
-  -DNVCC
-  ${CUDA_NVCC_INCLUDE_ARGS}
-  )
-
-if(CUDA_result)
-  # Since nvcc can sometimes leave half done files make sure that we delete the output file.
-  cuda_execute_process(
-    "Removing ${generated_file}"
-    COMMAND "${CMAKE_COMMAND}" -E remove "${generated_file}"
-    )
-  message(FATAL_ERROR "Error generating file ${generated_file}")
-else()
-  if(verbose)
-    message("Generated ${generated_file} successfully.")
-  endif()
-endif()
-
-# Cubin resource report commands.
-if( build_cubin )
-  # Run with -cubin to produce resource usage report.
-  cuda_execute_process(
-    "Generating ${generated_cubin_file}"
-    COMMAND "${CUDA_NVCC_EXECUTABLE}"
-    "${source_file}"
-    ${CUDA_NVCC_FLAGS}
-    ${nvcc_flags}
-    ${CCBIN}
-    ${nvcc_host_compiler_flags}
-    -DNVCC
-    -cubin
-    -o "${generated_cubin_file}"
-    ${CUDA_NVCC_INCLUDE_ARGS}
-    )
-
-  # Execute the parser script.
-  cuda_execute_process(
-    "Executing the parser script"
-    COMMAND  "${CMAKE_COMMAND}"
-    -D "input_file:STRING=${generated_cubin_file}"
-    -P "${CUDA_parse_cubin}"
-    )
-
-endif()
diff --git a/share/cmake-3.2/Modules/FindDCMTK.cmake b/share/cmake-3.2/Modules/FindDCMTK.cmake
deleted file mode 100644
index 91aafbb..0000000
--- a/share/cmake-3.2/Modules/FindDCMTK.cmake
+++ /dev/null
@@ -1,157 +0,0 @@
-#.rst:
-# FindDCMTK
-# ---------
-#
-# find DCMTK libraries and applications
-
-#  DCMTK_INCLUDE_DIRS   - Directories to include to use DCMTK
-#  DCMTK_LIBRARIES     - Files to link against to use DCMTK
-#  DCMTK_FOUND         - If false, don't try to use DCMTK
-#  DCMTK_DIR           - (optional) Source directory for DCMTK
-#
-# DCMTK_DIR can be used to make it simpler to find the various include
-# directories and compiled libraries if you've just compiled it in the
-# source tree. Just set it to the root of the tree where you extracted
-# the source (default to /usr/include/dcmtk/)
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-# Copyright 2009-2010 Mathieu Malaterre <mathieu.malaterre@gmail.com>
-# Copyright 2010 Thomas Sondergaard <ts@medical-insight.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#
-# Written for VXL by Amitha Perera.
-# Upgraded for GDCM by Mathieu Malaterre.
-# Modified for EasyViz by Thomas Sondergaard.
-#
-
-if(NOT DCMTK_FOUND AND NOT DCMTK_DIR)
-  set(DCMTK_DIR
-    "/usr/include/dcmtk/"
-    CACHE
-    PATH
-    "Root of DCMTK source tree (optional).")
-  mark_as_advanced(DCMTK_DIR)
-endif()
-
-
-foreach(lib
-    dcmdata
-    dcmimage
-    dcmimgle
-    dcmjpeg
-    dcmnet
-    dcmpstat
-    dcmqrdb
-    dcmsign
-    dcmsr
-    dcmtls
-    ijg12
-    ijg16
-    ijg8
-    ofstd)
-
-  find_library(DCMTK_${lib}_LIBRARY
-    ${lib}
-    PATHS
-    ${DCMTK_DIR}/${lib}/libsrc
-    ${DCMTK_DIR}/${lib}/libsrc/Release
-    ${DCMTK_DIR}/${lib}/libsrc/Debug
-    ${DCMTK_DIR}/${lib}/Release
-    ${DCMTK_DIR}/${lib}/Debug
-    ${DCMTK_DIR}/lib)
-
-  mark_as_advanced(DCMTK_${lib}_LIBRARY)
-
-  if(DCMTK_${lib}_LIBRARY)
-    list(APPEND DCMTK_LIBRARIES ${DCMTK_${lib}_LIBRARY})
-  endif()
-
-endforeach()
-
-
-set(DCMTK_config_TEST_HEADER osconfig.h)
-set(DCMTK_dcmdata_TEST_HEADER dctypes.h)
-set(DCMTK_dcmimage_TEST_HEADER dicoimg.h)
-set(DCMTK_dcmimgle_TEST_HEADER dcmimage.h)
-set(DCMTK_dcmjpeg_TEST_HEADER djdecode.h)
-set(DCMTK_dcmnet_TEST_HEADER assoc.h)
-set(DCMTK_dcmpstat_TEST_HEADER dcmpstat.h)
-set(DCMTK_dcmqrdb_TEST_HEADER dcmqrdba.h)
-set(DCMTK_dcmsign_TEST_HEADER sicert.h)
-set(DCMTK_dcmsr_TEST_HEADER dsrtree.h)
-set(DCMTK_dcmtls_TEST_HEADER tlslayer.h)
-set(DCMTK_ofstd_TEST_HEADER ofstdinc.h)
-
-foreach(dir
-    config
-    dcmdata
-    dcmimage
-    dcmimgle
-    dcmjpeg
-    dcmnet
-    dcmpstat
-    dcmqrdb
-    dcmsign
-    dcmsr
-    dcmtls
-    ofstd)
-  find_path(DCMTK_${dir}_INCLUDE_DIR
-    ${DCMTK_${dir}_TEST_HEADER}
-    PATHS
-    ${DCMTK_DIR}/${dir}/include
-    ${DCMTK_DIR}/${dir}
-    ${DCMTK_DIR}/include/${dir}
-    ${DCMTK_DIR}/include/dcmtk/${dir}
-    ${DCMTK_DIR}/${dir}/include/dcmtk/${dir}
-    )
-  mark_as_advanced(DCMTK_${dir}_INCLUDE_DIR)
-
-  if(DCMTK_${dir}_INCLUDE_DIR)
-    list(APPEND
-      DCMTK_INCLUDE_DIRS
-      ${DCMTK_${dir}_INCLUDE_DIR})
-  endif()
-endforeach()
-
-if(WIN32)
-  list(APPEND DCMTK_LIBRARIES netapi32 wsock32)
-endif()
-
-if(DCMTK_ofstd_INCLUDE_DIR)
-  get_filename_component(DCMTK_dcmtk_INCLUDE_DIR
-    ${DCMTK_ofstd_INCLUDE_DIR}
-    PATH
-    CACHE)
-  list(APPEND DCMTK_INCLUDE_DIRS ${DCMTK_dcmtk_INCLUDE_DIR})
-  mark_as_advanced(DCMTK_dcmtk_INCLUDE_DIR)
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(DCMTK DEFAULT_MSG
-  DCMTK_config_INCLUDE_DIR
-  DCMTK_ofstd_INCLUDE_DIR
-  DCMTK_ofstd_LIBRARY
-  DCMTK_dcmdata_INCLUDE_DIR
-  DCMTK_dcmdata_LIBRARY
-  DCMTK_dcmimgle_INCLUDE_DIR
-  DCMTK_dcmimgle_LIBRARY)
-
-# Compatibility: This variable is deprecated
-set(DCMTK_INCLUDE_DIR ${DCMTK_INCLUDE_DIRS})
-
-foreach(executable dcmdump dcmdjpeg dcmdrle)
-  string(TOUPPER ${executable} EXECUTABLE)
-  find_program(DCMTK_${EXECUTABLE}_EXECUTABLE ${executable} ${DCMTK_DIR}/bin)
-  mark_as_advanced(DCMTK_${EXECUTABLE}_EXECUTABLE)
-endforeach()
diff --git a/share/cmake-3.2/Modules/FindFLEX.cmake b/share/cmake-3.2/Modules/FindFLEX.cmake
deleted file mode 100644
index c837c52..0000000
--- a/share/cmake-3.2/Modules/FindFLEX.cmake
+++ /dev/null
@@ -1,202 +0,0 @@
-#.rst:
-# FindFLEX
-# --------
-#
-# Find flex executable and provides a macro to generate custom build rules
-#
-#
-#
-# The module defines the following variables:
-#
-# ::
-#
-#   FLEX_FOUND - true is flex executable is found
-#   FLEX_EXECUTABLE - the path to the flex executable
-#   FLEX_VERSION - the version of flex
-#   FLEX_LIBRARIES - The flex libraries
-#   FLEX_INCLUDE_DIRS - The path to the flex headers
-#
-#
-#
-# The minimum required version of flex can be specified using the
-# standard syntax, e.g.  find_package(FLEX 2.5.13)
-#
-#
-#
-# If flex is found on the system, the module provides the macro:
-#
-# ::
-#
-#   FLEX_TARGET(Name FlexInput FlexOutput [COMPILE_FLAGS <string>])
-#
-# which creates a custom command to generate the <FlexOutput> file from
-# the <FlexInput> file.  If COMPILE_FLAGS option is specified, the next
-# parameter is added to the flex command line.  Name is an alias used to
-# get details of this custom command.  Indeed the macro defines the
-# following variables:
-#
-# ::
-#
-#   FLEX_${Name}_DEFINED - true is the macro ran successfully
-#   FLEX_${Name}_OUTPUTS - the source file generated by the custom rule, an
-#   alias for FlexOutput
-#   FLEX_${Name}_INPUT - the flex source file, an alias for ${FlexInput}
-#
-#
-#
-# Flex scanners oftenly use tokens defined by Bison: the code generated
-# by Flex depends of the header generated by Bison.  This module also
-# defines a macro:
-#
-# ::
-#
-#   ADD_FLEX_BISON_DEPENDENCY(FlexTarget BisonTarget)
-#
-# which adds the required dependency between a scanner and a parser
-# where <FlexTarget> and <BisonTarget> are the first parameters of
-# respectively FLEX_TARGET and BISON_TARGET macros.
-#
-# ::
-#
-#   ====================================================================
-#   Example:
-#
-#
-#
-# ::
-#
-#    find_package(BISON)
-#    find_package(FLEX)
-#
-#
-#
-# ::
-#
-#    BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp)
-#    FLEX_TARGET(MyScanner lexer.l  ${CMAKE_CURRENT_BINARY_DIR}/lexer.cpp)
-#    ADD_FLEX_BISON_DEPENDENCY(MyScanner MyParser)
-#
-#
-#
-# ::
-#
-#    include_directories(${CMAKE_CURRENT_BINARY_DIR})
-#    add_executable(Foo
-#       Foo.cc
-#       ${BISON_MyParser_OUTPUTS}
-#       ${FLEX_MyScanner_OUTPUTS}
-#    )
-#   ====================================================================
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-# Copyright 2006 Tristan Carel
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-find_program(FLEX_EXECUTABLE NAMES flex win_flex DOC "path to the flex executable")
-mark_as_advanced(FLEX_EXECUTABLE)
-
-find_library(FL_LIBRARY NAMES fl
-  DOC "Path to the fl library")
-
-find_path(FLEX_INCLUDE_DIR FlexLexer.h
-  DOC "Path to the flex headers")
-
-mark_as_advanced(FL_LIBRARY FLEX_INCLUDE_DIR)
-
-set(FLEX_INCLUDE_DIRS ${FLEX_INCLUDE_DIR})
-set(FLEX_LIBRARIES ${FL_LIBRARY})
-
-if(FLEX_EXECUTABLE)
-
-  execute_process(COMMAND ${FLEX_EXECUTABLE} --version
-    OUTPUT_VARIABLE FLEX_version_output
-    ERROR_VARIABLE FLEX_version_error
-    RESULT_VARIABLE FLEX_version_result
-    OUTPUT_STRIP_TRAILING_WHITESPACE)
-  if(NOT ${FLEX_version_result} EQUAL 0)
-    if(FLEX_FIND_REQUIRED)
-      message(SEND_ERROR "Command \"${FLEX_EXECUTABLE} --version\" failed with output:\n${FLEX_version_output}\n${FLEX_version_error}")
-    else()
-      message("Command \"${FLEX_EXECUTABLE} --version\" failed with output:\n${FLEX_version_output}\n${FLEX_version_error}\nFLEX_VERSION will not be available")
-    endif()
-  else()
-    # older versions of flex printed "/full/path/to/executable version X.Y"
-    # newer versions use "basename(executable) X.Y"
-    get_filename_component(FLEX_EXE_NAME_WE "${FLEX_EXECUTABLE}" NAME_WE)
-    get_filename_component(FLEX_EXE_EXT "${FLEX_EXECUTABLE}" EXT)
-    string(REGEX REPLACE "^.*${FLEX_EXE_NAME_WE}(${FLEX_EXE_EXT})?\"? (version )?([0-9]+[^ ]*)( .*)?$" "\\3"
-      FLEX_VERSION "${FLEX_version_output}")
-    unset(FLEX_EXE_EXT)
-    unset(FLEX_EXE_NAME_WE)
-  endif()
-
-  #============================================================
-  # FLEX_TARGET (public macro)
-  #============================================================
-  #
-  macro(FLEX_TARGET Name Input Output)
-    set(FLEX_TARGET_usage "FLEX_TARGET(<Name> <Input> <Output> [COMPILE_FLAGS <string>]")
-    if(${ARGC} GREATER 3)
-      if(${ARGC} EQUAL 5)
-        if("${ARGV3}" STREQUAL "COMPILE_FLAGS")
-          set(FLEX_EXECUTABLE_opts  "${ARGV4}")
-          separate_arguments(FLEX_EXECUTABLE_opts)
-        else()
-          message(SEND_ERROR ${FLEX_TARGET_usage})
-        endif()
-      else()
-        message(SEND_ERROR ${FLEX_TARGET_usage})
-      endif()
-    endif()
-
-    add_custom_command(OUTPUT ${Output}
-      COMMAND ${FLEX_EXECUTABLE}
-      ARGS ${FLEX_EXECUTABLE_opts} -o${Output} ${Input}
-      DEPENDS ${Input}
-      COMMENT "[FLEX][${Name}] Building scanner with flex ${FLEX_VERSION}"
-      WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
-
-    set(FLEX_${Name}_DEFINED TRUE)
-    set(FLEX_${Name}_OUTPUTS ${Output})
-    set(FLEX_${Name}_INPUT ${Input})
-    set(FLEX_${Name}_COMPILE_FLAGS ${FLEX_EXECUTABLE_opts})
-  endmacro()
-  #============================================================
-
-
-  #============================================================
-  # ADD_FLEX_BISON_DEPENDENCY (public macro)
-  #============================================================
-  #
-  macro(ADD_FLEX_BISON_DEPENDENCY FlexTarget BisonTarget)
-
-    if(NOT FLEX_${FlexTarget}_OUTPUTS)
-      message(SEND_ERROR "Flex target `${FlexTarget}' does not exists.")
-    endif()
-
-    if(NOT BISON_${BisonTarget}_OUTPUT_HEADER)
-      message(SEND_ERROR "Bison target `${BisonTarget}' does not exists.")
-    endif()
-
-    set_source_files_properties(${FLEX_${FlexTarget}_OUTPUTS}
-      PROPERTIES OBJECT_DEPENDS ${BISON_${BisonTarget}_OUTPUT_HEADER})
-  endmacro()
-  #============================================================
-
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(FLEX REQUIRED_VARS FLEX_EXECUTABLE
-                                       VERSION_VAR FLEX_VERSION)
-
-# FindFLEX.cmake ends here
diff --git a/share/cmake-3.2/Modules/FindFLTK.cmake b/share/cmake-3.2/Modules/FindFLTK.cmake
deleted file mode 100644
index 76f702e..0000000
--- a/share/cmake-3.2/Modules/FindFLTK.cmake
+++ /dev/null
@@ -1,334 +0,0 @@
-#.rst:
-# FindFLTK
-# --------
-#
-# Find the native FLTK includes and library
-#
-#
-#
-# By default FindFLTK.cmake will search for all of the FLTK components
-# and add them to the FLTK_LIBRARIES variable.
-#
-# ::
-#
-#    You can limit the components which get placed in FLTK_LIBRARIES by
-#    defining one or more of the following three options:
-#
-#
-#
-# ::
-#
-#      FLTK_SKIP_OPENGL, set to true to disable searching for opengl and
-#                        the FLTK GL library
-#      FLTK_SKIP_FORMS, set to true to disable searching for fltk_forms
-#      FLTK_SKIP_IMAGES, set to true to disable searching for fltk_images
-#
-#
-#
-# ::
-#
-#      FLTK_SKIP_FLUID, set to true if the fluid binary need not be present
-#                       at build time
-#
-#
-#
-# The following variables will be defined:
-#
-# ::
-#
-#      FLTK_FOUND, True if all components not skipped were found
-#      FLTK_INCLUDE_DIR, where to find include files
-#      FLTK_LIBRARIES, list of fltk libraries you should link against
-#      FLTK_FLUID_EXECUTABLE, where to find the Fluid tool
-#      FLTK_WRAP_UI, This enables the FLTK_WRAP_UI command
-#
-#
-#
-# The following cache variables are assigned but should not be used.
-# See the FLTK_LIBRARIES variable instead.
-#
-# ::
-#
-#      FLTK_BASE_LIBRARY   = the full path to fltk.lib
-#      FLTK_GL_LIBRARY     = the full path to fltk_gl.lib
-#      FLTK_FORMS_LIBRARY  = the full path to fltk_forms.lib
-#      FLTK_IMAGES_LIBRARY = the full path to fltk_images.lib
-
-#=============================================================================
-# Copyright 2001-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(NOT FLTK_SKIP_OPENGL)
-  find_package(OpenGL)
-endif()
-
-#  Platform dependent libraries required by FLTK
-if(WIN32)
-  if(NOT CYGWIN)
-    if(BORLAND)
-      set( FLTK_PLATFORM_DEPENDENT_LIBS import32 )
-    else()
-      set( FLTK_PLATFORM_DEPENDENT_LIBS wsock32 comctl32 )
-    endif()
-  endif()
-endif()
-
-if(UNIX)
-  include(${CMAKE_CURRENT_LIST_DIR}/FindX11.cmake)
-  find_library(FLTK_MATH_LIBRARY m)
-  set( FLTK_PLATFORM_DEPENDENT_LIBS ${X11_LIBRARIES} ${FLTK_MATH_LIBRARY})
-endif()
-
-if(APPLE)
-  set( FLTK_PLATFORM_DEPENDENT_LIBS  "-framework Carbon -framework Cocoa -framework ApplicationServices -lz")
-endif()
-
-# If FLTK_INCLUDE_DIR is already defined we assigne its value to FLTK_DIR
-if(FLTK_INCLUDE_DIR)
-  set(FLTK_DIR ${FLTK_INCLUDE_DIR})
-endif()
-
-
-# If FLTK has been built using CMake we try to find everything directly
-set(FLTK_DIR_STRING "directory containing FLTKConfig.cmake.  This is either the root of the build tree, or PREFIX/lib/fltk for an installation.")
-
-# Search only if the location is not already known.
-if(NOT FLTK_DIR)
-  # Get the system search path as a list.
-  file(TO_CMAKE_PATH "$ENV{PATH}" FLTK_DIR_SEARCH2)
-
-  # Construct a set of paths relative to the system search path.
-  set(FLTK_DIR_SEARCH "")
-  foreach(dir ${FLTK_DIR_SEARCH2})
-    set(FLTK_DIR_SEARCH ${FLTK_DIR_SEARCH} "${dir}/../lib/fltk")
-  endforeach()
-  string(REPLACE "//" "/" FLTK_DIR_SEARCH "${FLTK_DIR_SEARCH}")
-
-  #
-  # Look for an installation or build tree.
-  #
-  find_path(FLTK_DIR FLTKConfig.cmake
-    # Look for an environment variable FLTK_DIR.
-    HINTS
-      ENV FLTK_DIR
-
-    # Look in places relative to the system executable search path.
-    ${FLTK_DIR_SEARCH}
-
-    PATHS
-    # Look in standard UNIX install locations.
-    /usr/local/lib/fltk
-    /usr/lib/fltk
-    /usr/local/fltk
-    /usr/X11R6/include
-
-    # Read from the CMakeSetup registry entries.  It is likely that
-    # FLTK will have been recently built.
-    # TODO: Is this really a good idea?  I can already hear the user screaming, "But
-    # it worked when I configured the build LAST week!"
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild1]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild2]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild3]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild4]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild5]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild6]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild7]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild8]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild9]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild10]
-
-    # Help the user find it if we cannot.
-    DOC "The ${FLTK_DIR_STRING}"
-    )
-endif()
-
-  # Check if FLTK was built using CMake
-  if(EXISTS ${FLTK_DIR}/FLTKConfig.cmake)
-    set(FLTK_BUILT_WITH_CMAKE 1)
-  endif()
-
-  if(FLTK_BUILT_WITH_CMAKE)
-    set(FLTK_FOUND 1)
-    include(${FLTK_DIR}/FLTKConfig.cmake)
-
-    # Fluid
-    if(FLUID_COMMAND)
-      set(FLTK_FLUID_EXECUTABLE ${FLUID_COMMAND} CACHE FILEPATH "Fluid executable")
-    else()
-      find_program(FLTK_FLUID_EXECUTABLE fluid PATHS
-        ${FLTK_EXECUTABLE_DIRS}
-        ${FLTK_EXECUTABLE_DIRS}/RelWithDebInfo
-        ${FLTK_EXECUTABLE_DIRS}/Debug
-        ${FLTK_EXECUTABLE_DIRS}/Release
-        NO_SYSTEM_PATH)
-    endif()
-    # mark_as_advanced(FLTK_FLUID_EXECUTABLE)
-
-    set(FLTK_INCLUDE_DIR ${FLTK_DIR})
-    link_directories(${FLTK_LIBRARY_DIRS})
-
-    set(FLTK_BASE_LIBRARY fltk)
-    set(FLTK_GL_LIBRARY fltk_gl)
-    set(FLTK_FORMS_LIBRARY fltk_forms)
-    set(FLTK_IMAGES_LIBRARY fltk_images)
-
-    # Add the extra libraries
-    load_cache(${FLTK_DIR}
-      READ_WITH_PREFIX
-      FL FLTK_USE_SYSTEM_JPEG
-      FL FLTK_USE_SYSTEM_PNG
-      FL FLTK_USE_SYSTEM_ZLIB
-      )
-
-    set(FLTK_IMAGES_LIBS "")
-    if(FLFLTK_USE_SYSTEM_JPEG)
-      set(FLTK_IMAGES_LIBS ${FLTK_IMAGES_LIBS} fltk_jpeg)
-    endif()
-    if(FLFLTK_USE_SYSTEM_PNG)
-      set(FLTK_IMAGES_LIBS ${FLTK_IMAGES_LIBS} fltk_png)
-    endif()
-    if(FLFLTK_USE_SYSTEM_ZLIB)
-      set(FLTK_IMAGES_LIBS ${FLTK_IMAGES_LIBS} fltk_zlib)
-    endif()
-    set(FLTK_IMAGES_LIBS "${FLTK_IMAGES_LIBS}" CACHE INTERNAL
-      "Extra libraries for fltk_images library.")
-
-  else()
-
-    # if FLTK was not built using CMake
-    # Find fluid executable.
-    find_program(FLTK_FLUID_EXECUTABLE fluid ${FLTK_INCLUDE_DIR}/fluid)
-
-    # Use location of fluid to help find everything else.
-    set(FLTK_INCLUDE_SEARCH_PATH "")
-    set(FLTK_LIBRARY_SEARCH_PATH "")
-    if(FLTK_FLUID_EXECUTABLE)
-      get_filename_component(FLTK_BIN_DIR "${FLTK_FLUID_EXECUTABLE}" PATH)
-      set(FLTK_INCLUDE_SEARCH_PATH ${FLTK_INCLUDE_SEARCH_PATH}
-        ${FLTK_BIN_DIR}/../include ${FLTK_BIN_DIR}/..)
-      set(FLTK_LIBRARY_SEARCH_PATH ${FLTK_LIBRARY_SEARCH_PATH}
-        ${FLTK_BIN_DIR}/../lib)
-      set(FLTK_WRAP_UI 1)
-    endif()
-
-    #
-    # Try to find FLTK include dir using fltk-config
-    #
-    if(UNIX)
-      # Use fltk-config to generate a list of possible include directories
-      find_program(FLTK_CONFIG_SCRIPT fltk-config PATHS ${FLTK_BIN_DIR})
-      if(FLTK_CONFIG_SCRIPT)
-        if(NOT FLTK_INCLUDE_DIR)
-          exec_program(${FLTK_CONFIG_SCRIPT} ARGS --cxxflags OUTPUT_VARIABLE FLTK_CXXFLAGS)
-          if(FLTK_CXXFLAGS)
-            string(REGEX MATCHALL "-I[^ ]*" _fltk_temp_dirs ${FLTK_CXXFLAGS})
-            string(REPLACE "-I" "" _fltk_temp_dirs "${_fltk_temp_dirs}")
-            foreach(_dir ${_fltk_temp_dirs})
-              string(STRIP ${_dir} _output)
-              list(APPEND _FLTK_POSSIBLE_INCLUDE_DIRS ${_output})
-            endforeach()
-          endif()
-        endif()
-      endif()
-    endif()
-
-    set(FLTK_INCLUDE_SEARCH_PATH ${FLTK_INCLUDE_SEARCH_PATH}
-      /usr/local/fltk
-      /usr/X11R6/include
-      ${_FLTK_POSSIBLE_INCLUDE_DIRS}
-      )
-
-    find_path(FLTK_INCLUDE_DIR
-        NAMES FL/Fl.h FL/Fl.H    # fltk 1.1.9 has Fl.H (#8376)
-        PATHS ${FLTK_INCLUDE_SEARCH_PATH})
-
-    #
-    # Try to find FLTK library
-    if(UNIX)
-      if(FLTK_CONFIG_SCRIPT)
-        exec_program(${FLTK_CONFIG_SCRIPT} ARGS --libs OUTPUT_VARIABLE _FLTK_POSSIBLE_LIBS)
-        if(_FLTK_POSSIBLE_LIBS)
-          get_filename_component(_FLTK_POSSIBLE_LIBRARY_DIR ${_FLTK_POSSIBLE_LIBS} PATH)
-        endif()
-      endif()
-    endif()
-
-    set(FLTK_LIBRARY_SEARCH_PATH ${FLTK_LIBRARY_SEARCH_PATH}
-      /usr/local/fltk/lib
-      /usr/X11R6/lib
-      ${FLTK_INCLUDE_DIR}/lib
-      ${_FLTK_POSSIBLE_LIBRARY_DIR}
-      )
-
-    find_library(FLTK_BASE_LIBRARY NAMES fltk fltkd
-      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
-    find_library(FLTK_GL_LIBRARY NAMES fltkgl fltkgld fltk_gl
-      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
-    find_library(FLTK_FORMS_LIBRARY NAMES fltkforms fltkformsd fltk_forms
-      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
-    find_library(FLTK_IMAGES_LIBRARY NAMES fltkimages fltkimagesd fltk_images
-      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
-
-    # Find the extra libraries needed for the fltk_images library.
-    if(UNIX)
-      if(FLTK_CONFIG_SCRIPT)
-        exec_program(${FLTK_CONFIG_SCRIPT} ARGS --use-images --ldflags
-          OUTPUT_VARIABLE FLTK_IMAGES_LDFLAGS)
-        set(FLTK_LIBS_EXTRACT_REGEX ".*-lfltk_images (.*) -lfltk.*")
-        if("${FLTK_IMAGES_LDFLAGS}" MATCHES "${FLTK_LIBS_EXTRACT_REGEX}")
-          string(REGEX REPLACE " +" ";" FLTK_IMAGES_LIBS "${CMAKE_MATCH_1}")
-          # The EXEC_PROGRAM will not be inherited into subdirectories from
-          # the file that originally included this module.  Save the answer.
-          set(FLTK_IMAGES_LIBS "${FLTK_IMAGES_LIBS}" CACHE INTERNAL
-            "Extra libraries for fltk_images library.")
-        endif()
-      endif()
-    endif()
-
-  endif()
-
-  # Append all of the required libraries together (by default, everything)
-  set(FLTK_LIBRARIES)
-  if(NOT FLTK_SKIP_IMAGES)
-    list(APPEND FLTK_LIBRARIES ${FLTK_IMAGES_LIBRARY})
-  endif()
-  if(NOT FLTK_SKIP_FORMS)
-    list(APPEND FLTK_LIBRARIES ${FLTK_FORMS_LIBRARY})
-  endif()
-  if(NOT FLTK_SKIP_OPENGL)
-    list(APPEND FLTK_LIBRARIES ${FLTK_GL_LIBRARY} ${OPENGL_gl_LIBRARY})
-    list(APPEND FLTK_INCLUDE_DIR ${OPENGL_INCLUDE_DIR})
-    list(REMOVE_DUPLICATES FLTK_INCLUDE_DIR)
-  endif()
-  list(APPEND FLTK_LIBRARIES ${FLTK_BASE_LIBRARY})
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-if(FLTK_SKIP_FLUID)
-  FIND_PACKAGE_HANDLE_STANDARD_ARGS(FLTK DEFAULT_MSG FLTK_LIBRARIES FLTK_INCLUDE_DIR)
-else()
-  FIND_PACKAGE_HANDLE_STANDARD_ARGS(FLTK DEFAULT_MSG FLTK_LIBRARIES FLTK_INCLUDE_DIR FLTK_FLUID_EXECUTABLE)
-endif()
-
-if(FLTK_FOUND)
-  if(APPLE)
-    set(FLTK_LIBRARIES ${FLTK_PLATFORM_DEPENDENT_LIBS} ${FLTK_LIBRARIES})
-  else()
-    set(FLTK_LIBRARIES ${FLTK_LIBRARIES} ${FLTK_PLATFORM_DEPENDENT_LIBS})
-  endif()
-
-  # The following deprecated settings are for compatibility with CMake 1.4
-  set (HAS_FLTK ${FLTK_FOUND})
-  set (FLTK_INCLUDE_PATH ${FLTK_INCLUDE_DIR})
-  set (FLTK_FLUID_EXE ${FLTK_FLUID_EXECUTABLE})
-  set (FLTK_LIBRARY ${FLTK_LIBRARIES})
-endif()
-
diff --git a/share/cmake-3.2/Modules/FindFLTK2.cmake b/share/cmake-3.2/Modules/FindFLTK2.cmake
deleted file mode 100644
index 930acca..0000000
--- a/share/cmake-3.2/Modules/FindFLTK2.cmake
+++ /dev/null
@@ -1,277 +0,0 @@
-#.rst:
-# FindFLTK2
-# ---------
-#
-# Find the native FLTK2 includes and library
-#
-# The following settings are defined
-#
-# ::
-#
-#   FLTK2_FLUID_EXECUTABLE, where to find the Fluid tool
-#   FLTK2_WRAP_UI, This enables the FLTK2_WRAP_UI command
-#   FLTK2_INCLUDE_DIR, where to find include files
-#   FLTK2_LIBRARIES, list of fltk2 libraries
-#   FLTK2_FOUND, Don't use FLTK2 if false.
-#
-# The following settings should not be used in general.
-#
-# ::
-#
-#   FLTK2_BASE_LIBRARY   = the full path to fltk2.lib
-#   FLTK2_GL_LIBRARY     = the full path to fltk2_gl.lib
-#   FLTK2_IMAGES_LIBRARY = the full path to fltk2_images.lib
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set (FLTK2_DIR $ENV{FLTK2_DIR} )
-
-#  Platform dependent libraries required by FLTK2
-if(WIN32)
-  if(NOT CYGWIN)
-    if(BORLAND)
-      set( FLTK2_PLATFORM_DEPENDENT_LIBS import32 )
-    else()
-      set( FLTK2_PLATFORM_DEPENDENT_LIBS wsock32 comctl32 )
-    endif()
-  endif()
-endif()
-
-if(UNIX)
-  include(${CMAKE_ROOT}/Modules/FindX11.cmake)
-  set( FLTK2_PLATFORM_DEPENDENT_LIBS ${X11_LIBRARIES} -lm)
-endif()
-
-if(APPLE)
-  set( FLTK2_PLATFORM_DEPENDENT_LIBS  "-framework Carbon -framework Cocoa -framework ApplicationServices -lz")
-endif()
-
-# If FLTK2_INCLUDE_DIR is already defined we assign its value to FLTK2_DIR
-if(FLTK2_INCLUDE_DIR)
-  set(FLTK2_DIR ${FLTK2_INCLUDE_DIR})
-else()
-  set(FLTK2_INCLUDE_DIR ${FLTK2_DIR})
-endif()
-
-
-# If FLTK2 has been built using CMake we try to find everything directly
-set(FLTK2_DIR_STRING "directory containing FLTK2Config.cmake.  This is either the root of the build tree, or PREFIX/lib/fltk for an installation.")
-
-# Search only if the location is not already known.
-if(NOT FLTK2_DIR)
-  # Get the system search path as a list.
-  file(TO_CMAKE_PATH "$ENV{PATH}" FLTK2_DIR_SEARCH2)
-
-  # Construct a set of paths relative to the system search path.
-  set(FLTK2_DIR_SEARCH "")
-  foreach(dir ${FLTK2_DIR_SEARCH2})
-    set(FLTK2_DIR_SEARCH ${FLTK2_DIR_SEARCH} "${dir}/../lib/fltk")
-  endforeach()
-  string(REPLACE "//" "/" FLTK2_DIR_SEARCH "${FLTK2_DIR_SEARCH}")
-
-  #
-  # Look for an installation or build tree.
-  #
-  find_path(FLTK2_DIR FLTK2Config.cmake
-    # Look for an environment variable FLTK2_DIR.
-    ENV FLTK2_DIR
-
-    # Look in places relative to the system executable search path.
-    ${FLTK2_DIR_SEARCH}
-
-    # Look in standard UNIX install locations.
-    /usr/local/lib/fltk2
-    /usr/lib/fltk2
-    /usr/local/fltk2
-    /usr/X11R6/include
-
-    # Read from the CMakeSetup registry entries.  It is likely that
-    # FLTK2 will have been recently built.
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild1]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild2]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild3]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild4]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild5]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild6]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild7]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild8]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild9]
-    [HKEY_CURRENT_USER\\Software\\Kitware\\CMakeSetup\\Settings\\StartPath;WhereBuild10]
-
-    # Help the user find it if we cannot.
-    DOC "The ${FLTK2_DIR_STRING}"
-    )
-
-  if(NOT FLTK2_DIR)
-    find_path(FLTK2_DIR fltk/run.h ${FLTK2_INCLUDE_SEARCH_PATH})
-  endif()
-
-endif()
-
-
-# If FLTK2 was found, load the configuration file to get the rest of the
-# settings.
-if(FLTK2_DIR)
-
-  # Check if FLTK2 was built using CMake
-  if(EXISTS ${FLTK2_DIR}/FLTK2Config.cmake)
-    set(FLTK2_BUILT_WITH_CMAKE 1)
-  endif()
-
-  if(FLTK2_BUILT_WITH_CMAKE)
-    set(FLTK2_FOUND 1)
-    include(${FLTK2_DIR}/FLTK2Config.cmake)
-
-    # Fluid
-    if(FLUID_COMMAND)
-      set(FLTK2_FLUID_EXECUTABLE ${FLUID_COMMAND} CACHE FILEPATH "Fluid executable")
-    else()
-      find_program(FLTK2_FLUID_EXECUTABLE fluid2 PATHS
-        ${FLTK2_EXECUTABLE_DIRS}
-        ${FLTK2_EXECUTABLE_DIRS}/RelWithDebInfo
-        ${FLTK2_EXECUTABLE_DIRS}/Debug
-        ${FLTK2_EXECUTABLE_DIRS}/Release
-        NO_SYSTEM_PATH)
-    endif()
-
-    mark_as_advanced(FLTK2_FLUID_EXECUTABLE)
-    set( FLTK_FLUID_EXECUTABLE ${FLTK2_FLUID_EXECUTABLE} )
-
-
-
-
-    set(FLTK2_INCLUDE_DIR ${FLTK2_DIR})
-    link_directories(${FLTK2_LIBRARY_DIRS})
-
-    set(FLTK2_BASE_LIBRARY fltk2)
-    set(FLTK2_GL_LIBRARY fltk2_gl)
-    set(FLTK2_IMAGES_LIBRARY fltk2_images)
-
-    # Add the extra libraries
-    load_cache(${FLTK2_DIR}
-      READ_WITH_PREFIX
-      FL FLTK2_USE_SYSTEM_JPEG
-      FL FLTK2_USE_SYSTEM_PNG
-      FL FLTK2_USE_SYSTEM_ZLIB
-      )
-
-    set(FLTK2_IMAGES_LIBS "")
-    if(FLFLTK2_USE_SYSTEM_JPEG)
-      set(FLTK2_IMAGES_LIBS ${FLTK2_IMAGES_LIBS} fltk2_jpeg)
-    endif()
-    if(FLFLTK2_USE_SYSTEM_PNG)
-      set(FLTK2_IMAGES_LIBS ${FLTK2_IMAGES_LIBS} fltk2_png)
-    endif()
-    if(FLFLTK2_USE_SYSTEM_ZLIB)
-      set(FLTK2_IMAGES_LIBS ${FLTK2_IMAGES_LIBS} fltk2_zlib)
-    endif()
-    set(FLTK2_IMAGES_LIBS "${FLTK2_IMAGES_LIBS}" CACHE INTERNAL
-      "Extra libraries for fltk2_images library.")
-
-  else()
-
-    # if FLTK2 was not built using CMake
-    # Find fluid executable.
-    find_program(FLTK2_FLUID_EXECUTABLE fluid2 ${FLTK2_INCLUDE_DIR}/fluid)
-
-    # Use location of fluid to help find everything else.
-    set(FLTK2_INCLUDE_SEARCH_PATH "")
-    set(FLTK2_LIBRARY_SEARCH_PATH "")
-    if(FLTK2_FLUID_EXECUTABLE)
-      set( FLTK_FLUID_EXECUTABLE ${FLTK2_FLUID_EXECUTABLE} )
-      get_filename_component(FLTK2_BIN_DIR "${FLTK2_FLUID_EXECUTABLE}" PATH)
-      set(FLTK2_INCLUDE_SEARCH_PATH ${FLTK2_INCLUDE_SEARCH_PATH}
-        ${FLTK2_BIN_DIR}/../include ${FLTK2_BIN_DIR}/..)
-      set(FLTK2_LIBRARY_SEARCH_PATH ${FLTK2_LIBRARY_SEARCH_PATH}
-        ${FLTK2_BIN_DIR}/../lib)
-      set(FLTK2_WRAP_UI 1)
-    endif()
-
-    set(FLTK2_INCLUDE_SEARCH_PATH ${FLTK2_INCLUDE_SEARCH_PATH}
-      /usr/local/fltk2
-      /usr/X11R6/include
-      )
-
-    find_path(FLTK2_INCLUDE_DIR fltk/run.h ${FLTK2_INCLUDE_SEARCH_PATH})
-
-    set(FLTK2_LIBRARY_SEARCH_PATH ${FLTK2_LIBRARY_SEARCH_PATH}
-      /usr/local/fltk2/lib
-      /usr/X11R6/lib
-      ${FLTK2_INCLUDE_DIR}/lib
-      )
-
-    find_library(FLTK2_BASE_LIBRARY NAMES fltk2
-      PATHS ${FLTK2_LIBRARY_SEARCH_PATH})
-    find_library(FLTK2_GL_LIBRARY NAMES fltk2_gl
-      PATHS ${FLTK2_LIBRARY_SEARCH_PATH})
-    find_library(FLTK2_IMAGES_LIBRARY NAMES fltk2_images
-      PATHS ${FLTK2_LIBRARY_SEARCH_PATH})
-
-    # Find the extra libraries needed for the fltk_images library.
-    if(UNIX)
-      find_program(FLTK2_CONFIG_SCRIPT fltk2-config PATHS ${FLTK2_BIN_DIR})
-      if(FLTK2_CONFIG_SCRIPT)
-        exec_program(${FLTK2_CONFIG_SCRIPT} ARGS --use-images --ldflags
-          OUTPUT_VARIABLE FLTK2_IMAGES_LDFLAGS)
-        set(FLTK2_LIBS_EXTRACT_REGEX ".*-lfltk2_images (.*) -lfltk2.*")
-        if("${FLTK2_IMAGES_LDFLAGS}" MATCHES "${FLTK2_LIBS_EXTRACT_REGEX}")
-          string(REGEX REPLACE " +" ";" FLTK2_IMAGES_LIBS "${CMAKE_MATCH_1}")
-          # The EXEC_PROGRAM will not be inherited into subdirectories from
-          # the file that originally included this module.  Save the answer.
-          set(FLTK2_IMAGES_LIBS "${FLTK2_IMAGES_LIBS}" CACHE INTERNAL
-            "Extra libraries for fltk_images library.")
-        endif()
-      endif()
-    endif()
-
-  endif()
-endif()
-
-
-set(FLTK2_FOUND 1)
-foreach(var FLTK2_FLUID_EXECUTABLE FLTK2_INCLUDE_DIR
-    FLTK2_BASE_LIBRARY FLTK2_GL_LIBRARY
-    FLTK2_IMAGES_LIBRARY)
-  if(NOT ${var})
-    message( STATUS "${var} not found" )
-    set(FLTK2_FOUND 0)
-  endif()
-endforeach()
-
-
-if(FLTK2_FOUND)
-  set(FLTK2_LIBRARIES ${FLTK2_IMAGES_LIBRARY} ${FLTK2_IMAGES_LIBS} ${FLTK2_BASE_LIBRARY} ${FLTK2_GL_LIBRARY} )
-  if(APPLE)
-    set(FLTK2_LIBRARIES ${FLTK2_PLATFORM_DEPENDENT_LIBS} ${FLTK2_LIBRARIES})
-  else()
-    set(FLTK2_LIBRARIES ${FLTK2_LIBRARIES} ${FLTK2_PLATFORM_DEPENDENT_LIBS})
-  endif()
-
-  # The following deprecated settings are for compatibility with CMake 1.4
-  set (HAS_FLTK2 ${FLTK2_FOUND})
-  set (FLTK2_INCLUDE_PATH ${FLTK2_INCLUDE_DIR})
-  set (FLTK2_FLUID_EXE ${FLTK2_FLUID_EXECUTABLE})
-  set (FLTK2_LIBRARY ${FLTK2_LIBRARIES})
-else()
-  # make FIND_PACKAGE friendly
-  if(NOT FLTK2_FIND_QUIETLY)
-    if(FLTK2_FIND_REQUIRED)
-      message(FATAL_ERROR
-              "FLTK2 required, please specify its location with FLTK2_DIR.")
-    else()
-      message(STATUS "FLTK2 was not found.")
-    endif()
-  endif()
-endif()
-
diff --git a/share/cmake-3.2/Modules/FindGSL.cmake b/share/cmake-3.2/Modules/FindGSL.cmake
deleted file mode 100644
index ef125c0..0000000
--- a/share/cmake-3.2/Modules/FindGSL.cmake
+++ /dev/null
@@ -1,238 +0,0 @@
-#.rst:
-# FindGSL
-# --------
-#
-# Find the native GSL includes and libraries.
-#
-# The GNU Scientific Library (GSL) is a numerical library for C and C++
-# programmers. It is free software under the GNU General Public
-# License.
-#
-# Imported Targets
-# ^^^^^^^^^^^^^^^^
-#
-# If GSL is found, this module defines the following :prop_tgt:`IMPORTED`
-# targets::
-#
-#  GSL::gsl      - The main GSL library.
-#  GSL::gslcblas - The CBLAS support library used by GSL.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project::
-#
-#  GSL_FOUND          - True if GSL found on the local system
-#  GSL_INCLUDE_DIRS   - Location of GSL header files.
-#  GSL_LIBRARIES      - The GSL libraries.
-#  GSL_VERSION        - The version of the discovered GSL install.
-#
-# Hints
-# ^^^^^
-#
-# Set ``GSL_ROOT_DIR`` to a directory that contains a GSL installation.
-#
-# This script expects to find libraries at ``$GSL_ROOT_DIR/lib`` and the GSL
-# headers at ``$GSL_ROOT_DIR/include/gsl``.  The library directory may
-# optionally provide Release and Debug folders.  For Unix-like systems, this
-# script will use ``$GSL_ROOT_DIR/bin/gsl-config`` (if found) to aid in the
-# discovery GSL.
-#
-# Cache Variables
-# ^^^^^^^^^^^^^^^
-#
-# This module may set the following variables depending on platform and type
-# of GSL installation discovered.  These variables may optionally be set to
-# help this module find the correct files::
-#
-#  GSL_CLBAS_LIBRARY       - Location of the GSL CBLAS library.
-#  GSL_CBLAS_LIBRARY_DEBUG - Location of the debug GSL CBLAS library (if any).
-#  GSL_CONFIG_EXECUTABLE   - Location of the ``gsl-config`` script (if any).
-#  GSL_LIBRARY             - Location of the GSL library.
-#  GSL_LIBRARY_DEBUG       - Location of the debug GSL library (if any).
-#
-
-#=============================================================================
-# Copyright 2014 Kelly Thompson <kgt@lanl.gov>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Include these modules to handle the QUIETLY and REQUIRED arguments.
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-#=============================================================================
-# If the user has provided ``GSL_ROOT_DIR``, use it!  Choose items found
-# at this location over system locations.
-if( EXISTS "$ENV{GSL_ROOT_DIR}" )
-  file( TO_CMAKE_PATH "$ENV{GSL_ROOT_DIR}" GSL_ROOT_DIR )
-  set( GSL_ROOT_DIR "${GSL_ROOT_DIR}" CACHE PATH "Prefix for GSL installation." )
-endif()
-if( NOT EXISTS "${GSL_ROOT_DIR}" )
-  set( GSL_USE_PKGCONFIG ON )
-endif()
-
-#=============================================================================
-# As a first try, use the PkgConfig module.  This will work on many
-# *NIX systems.  See :module:`findpkgconfig`
-# This will return ``GSL_INCLUDEDIR`` and ``GSL_LIBDIR`` used below.
-if( GSL_USE_PKGCONFIG )
-  find_package(PkgConfig)
-  pkg_check_modules( GSL QUIET gsl )
-
-  if( EXISTS "${GSL_INCLUDEDIR}" )
-    get_filename_component( GSL_ROOT_DIR "${GSL_INCLUDEDIR}" DIRECTORY CACHE)
-  endif()
-endif()
-
-#=============================================================================
-# Set GSL_INCLUDE_DIRS and GSL_LIBRARIES. If we skipped the PkgConfig step, try
-# to find the libraries at $GSL_ROOT_DIR (if provided) or in standard system
-# locations.  These find_library and find_path calls will prefer custom
-# locations over standard locations (HINTS).  If the requested file is not found
-# at the HINTS location, standard system locations will be still be searched
-# (/usr/lib64 (Redhat), lib/i386-linux-gnu (Debian)).
-
-find_path( GSL_INCLUDE_DIR
-  NAMES gsl/gsl_sf.h
-  HINTS ${GSL_ROOT_DIR}/include ${GSL_INCLUDEDIR}
-)
-find_library( GSL_LIBRARY
-  NAMES gsl
-  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
-  PATH_SUFFIXES Release Debug
-)
-find_library( GSL_CBLAS_LIBRARY
-  NAMES gslcblas cblas
-  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
-  PATH_SUFFIXES Release Debug
-)
-# Do we also have debug versions?
-find_library( GSL_LIBRARY_DEBUG
-  NAMES gsl
-  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
-  PATH_SUFFIXES Debug
-)
-find_library( GSL_CBLAS_LIBRARY_DEBUG
-  NAMES gslcblas cblas
-  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
-  PATH_SUFFIXES Debug
-)
-set( GSL_INCLUDE_DIRS ${GSL_INCLUDE_DIR} )
-set( GSL_LIBRARIES ${GSL_LIBRARY} ${GSL_CBLAS_LIBRARY} )
-
-# If we didn't use PkgConfig, try to find the version via gsl-config or by
-# reading gsl_version.h.
-if( NOT GSL_VERSION )
-  # 1. If gsl-config exists, query for the version.
-  find_program( GSL_CONFIG_EXECUTABLE
-    NAMES gsl-config
-    HINTS "${GSL_ROOT_DIR}/bin"
-    )
-  if( EXISTS "${GSL_CONFIG_EXECUTABLE}" )
-    execute_process(
-      COMMAND "${GSL_CONFIG_EXECUTABLE}" --version
-      OUTPUT_VARIABLE GSL_VERSION
-      OUTPUT_STRIP_TRAILING_WHITESPACE )
-  endif()
-
-  # 2. If gsl-config is not available, try looking in gsl/gsl_version.h
-  if( NOT GSL_VERSION AND EXISTS "${GSL_INCLUDE_DIRS}/gsl/gsl_version.h" )
-    file( STRINGS "${GSL_INCLUDE_DIRS}/gsl/gsl_version.h" gsl_version_h_contents REGEX "define GSL_VERSION" )
-    string( REGEX REPLACE ".*([0-9].[0-9][0-9]).*" "\\1" GSL_VERSION ${gsl_version_h_contents} )
-  endif()
-
-  # might also try scraping the directory name for a regex match "gsl-X.X"
-endif()
-
-#=============================================================================
-# handle the QUIETLY and REQUIRED arguments and set GSL_FOUND to TRUE if all
-# listed variables are TRUE
-find_package_handle_standard_args( GSL
-  FOUND_VAR
-    GSL_FOUND
-  REQUIRED_VARS
-    GSL_INCLUDE_DIR
-    GSL_LIBRARY
-    GSL_CBLAS_LIBRARY
-  VERSION_VAR
-    GSL_VERSION
-    )
-
-mark_as_advanced( GSL_ROOT_DIR GSL_VERSION GSL_LIBRARY GSL_INCLUDE_DIR
-  GSL_CBLAS_LIBRARY GSL_LIBRARY_DEBUG GSL_CBLAS_LIBRARY_DEBUG
-  GSL_USE_PKGCONFIG GSL_CONFIG )
-
-#=============================================================================
-# Register imported libraries:
-# 1. If we can find a Windows .dll file (or if we can find both Debug and
-#    Release libraries), we will set appropriate target properties for these.
-# 2. However, for most systems, we will only register the import location and
-#    include directory.
-
-# Look for dlls, or Release and Debug libraries.
-if(WIN32)
-  string( REPLACE ".lib" ".dll" GSL_LIBRARY_DLL       "${GSL_LIBRARY}" )
-  string( REPLACE ".lib" ".dll" GSL_CBLAS_LIBRARY_DLL "${GSL_CBLAS_LIBRARY}" )
-  string( REPLACE ".lib" ".dll" GSL_LIBRARY_DEBUG_DLL "${GSL_LIBRARY_DEBUG}" )
-  string( REPLACE ".lib" ".dll" GSL_CBLAS_LIBRARY_DEBUG_DLL "${GSL_CBLAS_LIBRARY_DEBUG}" )
-endif()
-
-if( GSL_FOUND AND NOT TARGET GSL::gsl )
-  if( EXISTS "${GSL_LIBRARY_DLL}" AND EXISTS "${GSL_CBLAS_LIBRARY_DLL}")
-
-    # Windows systems with dll libraries.
-    add_library( GSL::gsl      SHARED IMPORTED )
-    add_library( GSL::gslcblas SHARED IMPORTED )
-
-    # Windows with dlls, but only Release libraries.
-    set_target_properties( GSL::gslcblas PROPERTIES
-      IMPORTED_LOCATION_RELEASE         "${GSL_CBLAS_LIBRARY_DLL}"
-      IMPORTED_IMPLIB                   "${GSL_CBLAS_LIBRARY}"
-      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
-      IMPORTED_CONFIGURATIONS           Release
-      IMPORTED_LINK_INTERFACE_LANGUAGES "C" )
-    set_target_properties( GSL::gsl PROPERTIES
-      IMPORTED_LOCATION_RELEASE         "${GSL_LIBRARY_DLL}"
-      IMPORTED_IMPLIB                   "${GSL_LIBRARY}"
-      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
-      IMPORTED_CONFIGURATIONS           Release
-      IMPORTED_LINK_INTERFACE_LANGUAGES "C"
-      INTERFACE_LINK_LIBRARIES          GSL::gslcblas )
-
-    # If we have both Debug and Release libraries
-    if( EXISTS "${GSL_LIBRARY_DEBUG_DLL}" AND EXISTS "${GSL_CBLAS_LIBRARY_DEBUG_DLL}")
-      set_property( TARGET GSL::gslcblas APPEND PROPERTY IMPORTED_CONFIGURATIONS Debug )
-      set_target_properties( GSL::gslcblas PROPERTIES
-        IMPORTED_LOCATION_DEBUG           "${GSL_CBLAS_LIBRARY_DEBUG_DLL}"
-        IMPORTED_IMPLIB_DEBUG             "${GSL_CBLAS_LIBRARY_DEBUG}" )
-      set_property( TARGET GSL::gsl APPEND PROPERTY IMPORTED_CONFIGURATIONS Debug )
-      set_target_properties( GSL::gsl PROPERTIES
-        IMPORTED_LOCATION_DEBUG           "${GSL_LIBRARY_DEBUG_DLL}"
-        IMPORTED_IMPLIB_DEBUG             "${GSL_LIBRARY_DEBUG}" )
-    endif()
-
-  else()
-
-    # For all other environments (ones without dll libraries), create
-    # the imported library targets.
-    add_library( GSL::gsl      UNKNOWN IMPORTED )
-    add_library( GSL::gslcblas UNKNOWN IMPORTED )
-    set_target_properties( GSL::gslcblas PROPERTIES
-      IMPORTED_LOCATION                 "${GSL_CBLAS_LIBRARY}"
-      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
-      IMPORTED_LINK_INTERFACE_LANGUAGES "C" )
-    set_target_properties( GSL::gsl PROPERTIES
-      IMPORTED_LOCATION                 "${GSL_LIBRARY}"
-      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
-      IMPORTED_LINK_INTERFACE_LANGUAGES "C"
-      INTERFACE_LINK_LIBRARIES          GSL::gslcblas )
-  endif()
-endif()
diff --git a/share/cmake-3.2/Modules/FindGTK2.cmake b/share/cmake-3.2/Modules/FindGTK2.cmake
deleted file mode 100644
index 72bb8eb..0000000
--- a/share/cmake-3.2/Modules/FindGTK2.cmake
+++ /dev/null
@@ -1,902 +0,0 @@
-#.rst:
-# FindGTK2
-# --------
-#
-# FindGTK2.cmake
-#
-# This module can find the GTK2 widget libraries and several of its
-# other optional components like gtkmm, glade, and glademm.
-#
-# NOTE: If you intend to use version checking, CMake 2.6.2 or later is
-#
-# ::
-#
-#        required.
-#
-#
-#
-# Specify one or more of the following components as you call this find
-# module.  See example below.
-#
-# ::
-#
-#    gtk
-#    gtkmm
-#    glade
-#    glademm
-#
-#
-#
-# The following variables will be defined for your use
-#
-# ::
-#
-#    GTK2_FOUND - Were all of your specified components found?
-#    GTK2_INCLUDE_DIRS - All include directories
-#    GTK2_LIBRARIES - All libraries
-#    GTK2_DEFINITIONS - Additional compiler flags
-#
-#
-#
-# ::
-#
-#    GTK2_VERSION - The version of GTK2 found (x.y.z)
-#    GTK2_MAJOR_VERSION - The major version of GTK2
-#    GTK2_MINOR_VERSION - The minor version of GTK2
-#    GTK2_PATCH_VERSION - The patch version of GTK2
-#
-#
-#
-# Optional variables you can define prior to calling this module:
-#
-# ::
-#
-#    GTK2_DEBUG - Enables verbose debugging of the module
-#    GTK2_ADDITIONAL_SUFFIXES - Allows defining additional directories to
-#                               search for include files
-#
-#
-#
-# ================= Example Usage:
-#
-# ::
-#
-#    Call find_package() once, here are some examples to pick from:
-#
-#
-#
-# ::
-#
-#    Require GTK 2.6 or later
-#        find_package(GTK2 2.6 REQUIRED gtk)
-#
-#
-#
-# ::
-#
-#    Require GTK 2.10 or later and Glade
-#        find_package(GTK2 2.10 REQUIRED gtk glade)
-#
-#
-#
-# ::
-#
-#    Search for GTK/GTKMM 2.8 or later
-#        find_package(GTK2 2.8 COMPONENTS gtk gtkmm)
-#
-#
-#
-# ::
-#
-#    if(GTK2_FOUND)
-#       include_directories(${GTK2_INCLUDE_DIRS})
-#       add_executable(mygui mygui.cc)
-#       target_link_libraries(mygui ${GTK2_LIBRARIES})
-#    endif()
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-# Copyright 2008-2012 Philip Lowman <philip@yhbt.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Version 1.6 (CMake 3.0)
-#   * Create targets for each library
-#   * Do not link libfreetype
-# Version 1.5 (CMake 2.8.12)
-#   * 14236: Detect gthread library
-#            Detect pangocairo on windows
-#            Detect pangocairo with gtk module instead of with gtkmm
-#   * 14259: Use vc100 libraries with MSVC11
-#   * 14260: Export a GTK2_DEFINITIONS variable to set /vd2 when appropriate
-#            (i.e. MSVC)
-#   * Use the optimized/debug syntax for _LIBRARY and _LIBRARIES variables when
-#     appropriate. A new set of _RELEASE variables was also added.
-#   * Remove GTK2_SKIP_MARK_AS_ADVANCED option, as now the variables are
-#     marked as advanced by SelectLibraryConfigurations
-#   * Detect gmodule, pangoft2 and pangoxft libraries
-# Version 1.4 (10/4/2012) (CMake 2.8.10)
-#   * 12596: Missing paths for FindGTK2 on NetBSD
-#   * 12049: Fixed detection of GTK include files in the lib folder on
-#            multiarch systems.
-# Version 1.3 (11/9/2010) (CMake 2.8.4)
-#   * 11429: Add support for detecting GTK2 built with Visual Studio 10.
-#            Thanks to Vincent Levesque for the patch.
-# Version 1.2 (8/30/2010) (CMake 2.8.3)
-#   * Merge patch for detecting gdk-pixbuf library (split off
-#     from core GTK in 2.21).  Thanks to Vincent Untz for the patch
-#     and Ricardo Cruz for the heads up.
-# Version 1.1 (8/19/2010) (CMake 2.8.3)
-#   * Add support for detecting GTK2 under macports (thanks to Gary Kramlich)
-# Version 1.0 (8/12/2010) (CMake 2.8.3)
-#   * Add support for detecting new pangommconfig.h header file
-#     (Thanks to Sune Vuorela & the Debian Project for the patch)
-#   * Add support for detecting fontconfig.h header
-#   * Call find_package(Freetype) since it's required
-#   * Add support for allowing users to add additional library directories
-#     via the GTK2_ADDITIONAL_SUFFIXES variable (kind of a future-kludge in
-#     case the GTK developers change versions on any of the directories in the
-#     future).
-# Version 0.8 (1/4/2010)
-#   * Get module working under MacOSX fink by adding /sw/include, /sw/lib
-#     to PATHS and the gobject library
-# Version 0.7 (3/22/09)
-#   * Checked into CMake CVS
-#   * Added versioning support
-#   * Module now defaults to searching for GTK if COMPONENTS not specified.
-#   * Added HKCU prior to HKLM registry key and GTKMM specific environment
-#      variable as per mailing list discussion.
-#   * Added lib64 to include search path and a few other search paths where GTK
-#      may be installed on Unix systems.
-#   * Switched to lowercase CMake commands
-#   * Prefaced internal variables with _GTK2 to prevent collision
-#   * Changed internal macros to functions
-#   * Enhanced documentation
-# Version 0.6 (1/8/08)
-#   Added GTK2_SKIP_MARK_AS_ADVANCED option
-# Version 0.5 (12/19/08)
-#   Second release to cmake mailing list
-
-#=============================================================
-# _GTK2_GET_VERSION
-# Internal function to parse the version number in gtkversion.h
-#   _OUT_major = Major version number
-#   _OUT_minor = Minor version number
-#   _OUT_micro = Micro version number
-#   _gtkversion_hdr = Header file to parse
-#=============================================================
-
-include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
-
-function(_GTK2_GET_VERSION _OUT_major _OUT_minor _OUT_micro _gtkversion_hdr)
-    file(STRINGS ${_gtkversion_hdr} _contents REGEX "#define GTK_M[A-Z]+_VERSION[ \t]+")
-    if(_contents)
-        string(REGEX REPLACE ".*#define GTK_MAJOR_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_major} "${_contents}")
-        string(REGEX REPLACE ".*#define GTK_MINOR_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_minor} "${_contents}")
-        string(REGEX REPLACE ".*#define GTK_MICRO_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_micro} "${_contents}")
-
-        if(NOT ${_OUT_major} MATCHES "[0-9]+")
-            message(FATAL_ERROR "Version parsing failed for GTK2_MAJOR_VERSION!")
-        endif()
-        if(NOT ${_OUT_minor} MATCHES "[0-9]+")
-            message(FATAL_ERROR "Version parsing failed for GTK2_MINOR_VERSION!")
-        endif()
-        if(NOT ${_OUT_micro} MATCHES "[0-9]+")
-            message(FATAL_ERROR "Version parsing failed for GTK2_MICRO_VERSION!")
-        endif()
-
-        set(${_OUT_major} ${${_OUT_major}} PARENT_SCOPE)
-        set(${_OUT_minor} ${${_OUT_minor}} PARENT_SCOPE)
-        set(${_OUT_micro} ${${_OUT_micro}} PARENT_SCOPE)
-    else()
-        message(FATAL_ERROR "Include file ${_gtkversion_hdr} does not exist")
-    endif()
-endfunction()
-
-#=============================================================
-# _GTK2_FIND_INCLUDE_DIR
-# Internal function to find the GTK include directories
-#   _var = variable to set (_INCLUDE_DIR is appended)
-#   _hdr = header file to look for
-#=============================================================
-function(_GTK2_FIND_INCLUDE_DIR _var _hdr)
-
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
-                       "_GTK2_FIND_INCLUDE_DIR( ${_var} ${_hdr} )")
-    endif()
-
-    set(_gtk_packages
-        # If these ever change, things will break.
-        ${GTK2_ADDITIONAL_SUFFIXES}
-        glibmm-2.4
-        glib-2.0
-        atk-1.0
-        atkmm-1.6
-        cairo
-        cairomm-1.0
-        gdk-pixbuf-2.0
-        gdkmm-2.4
-        giomm-2.4
-        gtk-2.0
-        gtkmm-2.4
-        libglade-2.0
-        libglademm-2.4
-        pango-1.0
-        pangomm-1.4
-        sigc++-2.0
-    )
-
-    #
-    # NOTE: The following suffixes cause searching for header files in both of
-    # these directories:
-    #         /usr/include/<pkg>
-    #         /usr/lib/<pkg>/include
-    #
-
-    set(_suffixes)
-    foreach(_d ${_gtk_packages})
-        list(APPEND _suffixes ${_d})
-        list(APPEND _suffixes ${_d}/include) # for /usr/lib/gtk-2.0/include
-    endforeach()
-
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "include suffixes = ${_suffixes}")
-    endif()
-
-    if(CMAKE_LIBRARY_ARCHITECTURE)
-      set(_gtk2_arch_dir /usr/lib/${CMAKE_LIBRARY_ARCHITECTURE})
-      if(GTK2_DEBUG)
-        message(STATUS "Adding ${_gtk2_arch_dir} to search path for multiarch support")
-      endif()
-    endif()
-    find_path(GTK2_${_var}_INCLUDE_DIR ${_hdr}
-        PATHS
-            ${_gtk2_arch_dir}
-            /usr/local/lib64
-            /usr/local/lib
-            /usr/lib64
-            /usr/lib
-            /usr/X11R6/include
-            /usr/X11R6/lib
-            /opt/gnome/include
-            /opt/gnome/lib
-            /opt/openwin/include
-            /usr/openwin/lib
-            /sw/include
-            /sw/lib
-            /opt/local/include
-            /opt/local/lib
-            /usr/pkg/lib
-            /usr/pkg/include/glib
-            $ENV{GTKMM_BASEPATH}/include
-            $ENV{GTKMM_BASEPATH}/lib
-            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/include
-            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/lib
-            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/include
-            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/lib
-        PATH_SUFFIXES
-            ${_suffixes}
-    )
-    mark_as_advanced(GTK2_${_var}_INCLUDE_DIR)
-
-    if(GTK2_${_var}_INCLUDE_DIR)
-        set(GTK2_INCLUDE_DIRS ${GTK2_INCLUDE_DIRS} ${GTK2_${_var}_INCLUDE_DIR} PARENT_SCOPE)
-    endif()
-
-endfunction()
-
-#=============================================================
-# _GTK2_FIND_LIBRARY
-# Internal function to find libraries packaged with GTK2
-#   _var = library variable to create (_LIBRARY is appended)
-#=============================================================
-function(_GTK2_FIND_LIBRARY _var _lib _expand_vc _append_version)
-
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
-                       "_GTK2_FIND_LIBRARY( ${_var} ${_lib} ${_expand_vc} ${_append_version} )")
-    endif()
-
-    # Not GTK versions per se but the versions encoded into Windows
-    # import libraries (GtkMM 2.14.1 has a gtkmm-vc80-2_4.lib for example)
-    # Also the MSVC libraries use _ for . (this is handled below)
-    set(_versions 2.20 2.18 2.16 2.14 2.12
-                  2.10  2.8  2.6  2.4  2.2 2.0
-                  1.20 1.18 1.16 1.14 1.12
-                  1.10  1.8  1.6  1.4  1.2 1.0)
-
-    set(_library)
-    set(_library_d)
-
-    set(_library ${_lib})
-
-    if(_expand_vc AND MSVC)
-        # Add vc80/vc90/vc100 midfixes
-        if(MSVC80)
-            set(_library   ${_library}-vc80)
-        elseif(MSVC90)
-            set(_library   ${_library}-vc90)
-        elseif(MSVC10)
-            set(_library ${_library}-vc100)
-        elseif(MSVC11)
-            # Up to gtkmm-win 2.22.0-2 there are no vc110 libraries but vc100 can be used
-            set(_library ${_library}-vc100)
-        endif()
-        set(_library_d ${_library}-d)
-    endif()
-
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "After midfix addition = ${_library} and ${_library_d}")
-    endif()
-
-    set(_lib_list)
-    set(_libd_list)
-    if(_append_version)
-        foreach(_ver ${_versions})
-            list(APPEND _lib_list  "${_library}-${_ver}")
-            list(APPEND _libd_list "${_library_d}-${_ver}")
-        endforeach()
-    else()
-        set(_lib_list ${_library})
-        set(_libd_list ${_library_d})
-    endif()
-
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "library list = ${_lib_list} and library debug list = ${_libd_list}")
-    endif()
-
-    # For some silly reason the MSVC libraries use _ instead of .
-    # in the version fields
-    if(_expand_vc AND MSVC)
-        set(_no_dots_lib_list)
-        set(_no_dots_libd_list)
-        foreach(_l ${_lib_list})
-            string(REPLACE "." "_" _no_dots_library ${_l})
-            list(APPEND _no_dots_lib_list ${_no_dots_library})
-        endforeach()
-        # And for debug
-        set(_no_dots_libsd_list)
-        foreach(_l ${_libd_list})
-            string(REPLACE "." "_" _no_dots_libraryd ${_l})
-            list(APPEND _no_dots_libd_list ${_no_dots_libraryd})
-        endforeach()
-
-        # Copy list back to original names
-        set(_lib_list ${_no_dots_lib_list})
-        set(_libd_list ${_no_dots_libd_list})
-    endif()
-
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "While searching for GTK2_${_var}_LIBRARY, our proposed library list is ${_lib_list}")
-    endif()
-
-    find_library(GTK2_${_var}_LIBRARY_RELEASE
-        NAMES ${_lib_list}
-        PATHS
-            /opt/gnome/lib
-            /usr/openwin/lib
-            /sw/lib
-            $ENV{GTKMM_BASEPATH}/lib
-            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/lib
-            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/lib
-        )
-
-    if(_expand_vc AND MSVC)
-        if(GTK2_DEBUG)
-            message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                           "While searching for GTK2_${_var}_LIBRARY_DEBUG our proposed library list is ${_libd_list}")
-        endif()
-
-        find_library(GTK2_${_var}_LIBRARY_DEBUG
-            NAMES ${_libd_list}
-            PATHS
-            $ENV{GTKMM_BASEPATH}/lib
-            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/lib
-            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/lib
-        )
-    endif()
-
-    select_library_configurations(GTK2_${_var})
-
-    set(GTK2_${_var}_LIBRARY ${GTK2_${_var}_LIBRARY} PARENT_SCOPE)
-    set(GTK2_${_var}_FOUND ${GTK2_${_var}_FOUND} PARENT_SCOPE)
-
-    if(GTK2_${_var}_FOUND)
-        set(GTK2_LIBRARIES ${GTK2_LIBRARIES} ${GTK2_${_var}_LIBRARY})
-        set(GTK2_LIBRARIES ${GTK2_LIBRARIES} PARENT_SCOPE)
-    endif()
-
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "GTK2_${_var}_LIBRARY_RELEASE = \"${GTK2_${_var}_LIBRARY_RELEASE}\"")
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "GTK2_${_var}_LIBRARY_DEBUG   = \"${GTK2_${_var}_LIBRARY_DEBUG}\"")
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "GTK2_${_var}_LIBRARY         = \"${GTK2_${_var}_LIBRARY}\"")
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
-                       "GTK2_${_var}_FOUND           = \"${GTK2_${_var}_FOUND}\"")
-    endif()
-
-endfunction()
-
-
-function(_GTK2_ADD_TARGET_DEPENDS_INTERNAL _var _property)
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
-                       "_GTK2_ADD_TARGET_DEPENDS_INTERNAL( ${_var} ${_property} )")
-    endif()
-
-    string(TOLOWER "${_var}" _basename)
-
-    if (TARGET GTK2::${_basename})
-        foreach(_depend ${ARGN})
-            set(_valid_depends)
-            if (TARGET GTK2::${_depend})
-                list(APPEND _valid_depends GTK2::${_depend})
-            endif()
-            if (_valid_depends)
-                set_property(TARGET GTK2::${_basename} APPEND PROPERTY ${_property} "${_valid_depends}")
-            endif()
-            set(_valid_depends)
-        endforeach()
-    endif()
-endfunction()
-
-function(_GTK2_ADD_TARGET_DEPENDS _var)
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
-                       "_GTK2_ADD_TARGET_DEPENDS( ${_var} )")
-    endif()
-
-    string(TOLOWER "${_var}" _basename)
-
-    if(TARGET GTK2::${_basename})
-        get_target_property(_configs GTK2::${_basename} IMPORTED_CONFIGURATIONS)
-        _GTK2_ADD_TARGET_DEPENDS_INTERNAL(${_var} INTERFACE_LINK_LIBRARIES ${ARGN})
-        foreach(_config ${_configs})
-            _GTK2_ADD_TARGET_DEPENDS_INTERNAL(${_var} IMPORTED_LINK_INTERFACE_LIBRARIES_${_config} ${ARGN})
-        endforeach()
-    endif()
-endfunction()
-
-function(_GTK2_ADD_TARGET_INCLUDE_DIRS _var)
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
-                       "_GTK2_ADD_TARGET_INCLUDE_DIRS( ${_var} )")
-    endif()
-
-    string(TOLOWER "${_var}" _basename)
-
-    if(TARGET GTK2::${_basename})
-        foreach(_include ${ARGN})
-            set_property(TARGET GTK2::${_basename} APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${_include}")
-        endforeach()
-    endif()
-endfunction()
-
-#=============================================================
-# _GTK2_ADD_TARGET
-# Internal function to create targets for GTK2
-#   _var = target to create
-#=============================================================
-function(_GTK2_ADD_TARGET _var)
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
-                       "_GTK2_ADD_TARGET( ${_var} )")
-    endif()
-
-    string(TOLOWER "${_var}" _basename)
-
-    cmake_parse_arguments(_${_var} "" "" "GTK2_DEPENDS;GTK2_OPTIONAL_DEPENDS;OPTIONAL_INCLUDES" ${ARGN})
-
-    if(GTK2_${_var}_FOUND AND NOT TARGET GTK2::${_basename})
-        # Do not create the target if dependencies are missing
-        foreach(_dep ${_${_var}_GTK2_DEPENDS})
-            if(NOT TARGET GTK2::${_dep})
-                return()
-            endif()
-        endforeach()
-
-        add_library(GTK2::${_basename} UNKNOWN IMPORTED)
-
-        if(GTK2_${_var}_LIBRARY_RELEASE)
-            set_property(TARGET GTK2::${_basename} APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
-            set_property(TARGET GTK2::${_basename}        PROPERTY IMPORTED_LOCATION_RELEASE "${GTK2_${_var}_LIBRARY_RELEASE}" )
-        endif()
-
-        if(GTK2_${_var}_LIBRARY_DEBUG)
-            set_property(TARGET GTK2::${_basename} APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
-            set_property(TARGET GTK2::${_basename}        PROPERTY IMPORTED_LOCATION_DEBUG "${GTK2_${_var}_LIBRARY_DEBUG}" )
-        endif()
-
-        if(GTK2_${_var}_INCLUDE_DIR)
-            set_property(TARGET GTK2::${_basename} APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${GTK2_${_var}_INCLUDE_DIR}")
-        endif()
-
-        if(GTK2_${_var}CONFIG_INCLUDE_DIR AND NOT "x${GTK2_${_var}CONFIG_INCLUDE_DIR}" STREQUAL "x${GTK2_${_var}_INCLUDE_DIR}")
-            set_property(TARGET GTK2::${_basename} APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${GTK2_${_var}CONFIG_INCLUDE_DIR}")
-        endif()
-
-        if(GTK2_DEFINITIONS)
-            set_property(TARGET GTK2::${_basename} PROPERTY INTERFACE_COMPILE_DEFINITIONS "${GTK2_DEFINITIONS}")
-        endif()
-
-        if(_${_var}_GTK2_DEPENDS)
-            _GTK2_ADD_TARGET_DEPENDS(${_var} ${_${_var}_GTK2_DEPENDS} ${_${_var}_GTK2_OPTIONAL_DEPENDS})
-        endif()
-
-        if(_${_var}_OPTIONAL_INCLUDES)
-            foreach(_D ${_${_var}_OPTIONAL_INCLUDES})
-                if(_D)
-                    _GTK2_ADD_TARGET_INCLUDE_DIRS(${_var} ${_D})
-                endif()
-            endforeach()
-        endif()
-
-        if(GTK2_USE_IMPORTED_TARGETS)
-            set(GTK2_${_var}_LIBRARY GTK2::${_basename} PARENT_SCOPE)
-        endif()
-
-    endif()
-endfunction()
-
-
-
-#=============================================================
-
-#
-# main()
-#
-
-set(GTK2_FOUND)
-set(GTK2_INCLUDE_DIRS)
-set(GTK2_LIBRARIES)
-set(GTK2_DEFINITIONS)
-
-if(NOT GTK2_FIND_COMPONENTS)
-    # Assume they only want GTK
-    set(GTK2_FIND_COMPONENTS gtk)
-endif()
-
-#
-# If specified, enforce version number
-#
-if(GTK2_FIND_VERSION)
-    set(GTK2_FAILED_VERSION_CHECK true)
-    if(GTK2_DEBUG)
-        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
-                       "Searching for version ${GTK2_FIND_VERSION}")
-    endif()
-    _GTK2_FIND_INCLUDE_DIR(GTK gtk/gtk.h)
-    if(GTK2_GTK_INCLUDE_DIR)
-        _GTK2_GET_VERSION(GTK2_MAJOR_VERSION
-                          GTK2_MINOR_VERSION
-                          GTK2_PATCH_VERSION
-                          ${GTK2_GTK_INCLUDE_DIR}/gtk/gtkversion.h)
-        set(GTK2_VERSION
-            ${GTK2_MAJOR_VERSION}.${GTK2_MINOR_VERSION}.${GTK2_PATCH_VERSION})
-        if(GTK2_FIND_VERSION_EXACT)
-            if(GTK2_VERSION VERSION_EQUAL GTK2_FIND_VERSION)
-                set(GTK2_FAILED_VERSION_CHECK false)
-            endif()
-        else()
-            if(GTK2_VERSION VERSION_EQUAL   GTK2_FIND_VERSION OR
-               GTK2_VERSION VERSION_GREATER GTK2_FIND_VERSION)
-                set(GTK2_FAILED_VERSION_CHECK false)
-            endif()
-        endif()
-    else()
-        # If we can't find the GTK include dir, we can't do version checking
-        if(GTK2_FIND_REQUIRED AND NOT GTK2_FIND_QUIETLY)
-            message(FATAL_ERROR "Could not find GTK2 include directory")
-        endif()
-        return()
-    endif()
-
-    if(GTK2_FAILED_VERSION_CHECK)
-        if(GTK2_FIND_REQUIRED AND NOT GTK2_FIND_QUIETLY)
-            if(GTK2_FIND_VERSION_EXACT)
-                message(FATAL_ERROR "GTK2 version check failed.  Version ${GTK2_VERSION} was found, version ${GTK2_FIND_VERSION} is needed exactly.")
-            else()
-                message(FATAL_ERROR "GTK2 version check failed.  Version ${GTK2_VERSION} was found, at least version ${GTK2_FIND_VERSION} is required")
-            endif()
-        endif()
-
-        # If the version check fails, exit out of the module here
-        return()
-    endif()
-endif()
-
-#
-# On MSVC, according to https://wiki.gnome.org/gtkmm/MSWindows, the /vd2 flag needs to be
-# passed to the compiler in order to use gtkmm
-#
-if(MSVC)
-    foreach(_GTK2_component ${GTK2_FIND_COMPONENTS})
-        if(_GTK2_component STREQUAL "gtkmm")
-            set(GTK2_DEFINITIONS "/vd2")
-        elseif(_GTK2_component STREQUAL "glademm")
-            set(GTK2_DEFINITIONS "/vd2")
-        endif()
-    endforeach()
-endif()
-
-#
-# Find all components
-#
-
-find_package(Freetype QUIET)
-if(FREETYPE_INCLUDE_DIR_ft2build AND FREETYPE_INCLUDE_DIR_freetype2)
-    list(APPEND GTK2_INCLUDE_DIRS ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2})
-endif()
-
-foreach(_GTK2_component ${GTK2_FIND_COMPONENTS})
-    if(_GTK2_component STREQUAL "gtk")
-        # Left for compatibility with previous versions.
-        _GTK2_FIND_INCLUDE_DIR(FONTCONFIG fontconfig/fontconfig.h)
-        _GTK2_FIND_INCLUDE_DIR(X11 X11/Xlib.h)
-
-        _GTK2_FIND_INCLUDE_DIR(GLIB glib.h)
-        _GTK2_FIND_INCLUDE_DIR(GLIBCONFIG glibconfig.h)
-        _GTK2_FIND_LIBRARY    (GLIB glib false true)
-        _GTK2_ADD_TARGET      (GLIB)
-
-        _GTK2_FIND_INCLUDE_DIR(GOBJECT glib-object.h)
-        _GTK2_FIND_LIBRARY    (GOBJECT gobject false true)
-        _GTK2_ADD_TARGET      (GOBJECT GTK2_DEPENDS glib)
-
-        _GTK2_FIND_INCLUDE_DIR(ATK atk/atk.h)
-        _GTK2_FIND_LIBRARY    (ATK atk false true)
-        _GTK2_ADD_TARGET      (ATK GTK2_DEPENDS gobject glib)
-
-        _GTK2_FIND_LIBRARY    (GIO gio false true)
-        _GTK2_ADD_TARGET      (GIO GTK2_DEPENDS gobject glib)
-
-        _GTK2_FIND_LIBRARY    (GTHREAD gthread false true)
-        _GTK2_ADD_TARGET      (GTHREAD GTK2_DEPENDS glib)
-
-        _GTK2_FIND_LIBRARY    (GMODULE gmodule false true)
-        _GTK2_ADD_TARGET      (GMODULE GTK2_DEPENDS glib)
-
-        _GTK2_FIND_INCLUDE_DIR(GDK_PIXBUF gdk-pixbuf/gdk-pixbuf.h)
-        _GTK2_FIND_LIBRARY    (GDK_PIXBUF gdk_pixbuf false true)
-        _GTK2_ADD_TARGET      (GDK_PIXBUF GTK2_DEPENDS gobject glib)
-
-        _GTK2_FIND_INCLUDE_DIR(CAIRO cairo.h)
-        _GTK2_FIND_LIBRARY    (CAIRO cairo false false)
-        _GTK2_ADD_TARGET      (CAIRO)
-
-        _GTK2_FIND_INCLUDE_DIR(PANGO pango/pango.h)
-        _GTK2_FIND_LIBRARY    (PANGO pango false true)
-        _GTK2_ADD_TARGET      (PANGO GTK2_DEPENDS gobject glib)
-
-        _GTK2_FIND_LIBRARY    (PANGOCAIRO pangocairo false true)
-        _GTK2_ADD_TARGET      (PANGOCAIRO GTK2_DEPENDS pango cairo gobject glib)
-
-        _GTK2_FIND_LIBRARY    (PANGOFT2 pangoft2 false true)
-        _GTK2_ADD_TARGET      (PANGOFT2 GTK2_DEPENDS pango gobject glib
-                                        OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                          ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                          ${GTK2_X11_INCLUDE_DIR})
-
-        _GTK2_FIND_LIBRARY    (PANGOXFT pangoxft false true)
-        _GTK2_ADD_TARGET      (PANGOXFT GTK2_DEPENDS pangoft2 pango gobject glib
-                                        OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                          ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                          ${GTK2_X11_INCLUDE_DIR})
-
-        _GTK2_FIND_INCLUDE_DIR(GDK gdk/gdk.h)
-        _GTK2_FIND_INCLUDE_DIR(GDKCONFIG gdkconfig.h)
-        if(UNIX)
-            if(APPLE)
-                _GTK2_FIND_LIBRARY    (GDK gdk-quartz false true)
-            endif()
-            if(NOT GTK2_GDK_FOUND)
-                _GTK2_FIND_LIBRARY    (GDK gdk-x11 false true)
-            endif()
-        else()
-            _GTK2_FIND_LIBRARY    (GDK gdk-win32 false true)
-        endif()
-        _GTK2_ADD_TARGET (GDK GTK2_DEPENDS pango gdk_pixbuf gobject glib
-                              GTK2_OPTIONAL_DEPENDS pangocairo cairo)
-
-        _GTK2_FIND_INCLUDE_DIR(GTK gtk/gtk.h)
-        if(UNIX)
-            if(APPLE)
-                _GTK2_FIND_LIBRARY    (GTK gtk-quartz false true)
-            endif()
-            if(NOT GTK2_GTK_FOUND)
-                _GTK2_FIND_LIBRARY    (GTK gtk-x11 false true)
-            endif()
-        else()
-            _GTK2_FIND_LIBRARY    (GTK gtk-win32 false true)
-        endif()
-        _GTK2_ADD_TARGET (GTK GTK2_DEPENDS gdk atk pangoft2 pango gdk_pixbuf gthread gobject glib
-                              GTK2_OPTIONAL_DEPENDS gio pangocairo cairo)
-
-    elseif(_GTK2_component STREQUAL "gtkmm")
-
-        _GTK2_FIND_INCLUDE_DIR(SIGC++ sigc++/sigc++.h)
-        _GTK2_FIND_INCLUDE_DIR(SIGC++CONFIG sigc++config.h)
-        _GTK2_FIND_LIBRARY    (SIGC++ sigc true true)
-        _GTK2_ADD_TARGET      (SIGC++)
-
-        _GTK2_FIND_INCLUDE_DIR(GLIBMM glibmm.h)
-        _GTK2_FIND_INCLUDE_DIR(GLIBMMCONFIG glibmmconfig.h)
-        _GTK2_FIND_LIBRARY    (GLIBMM glibmm true true)
-        _GTK2_ADD_TARGET      (GLIBMM GTK2_DEPENDS gobject sigc++ glib)
-
-        _GTK2_FIND_INCLUDE_DIR(GIOMM giomm.h)
-        _GTK2_FIND_INCLUDE_DIR(GIOMMCONFIG giommconfig.h)
-        _GTK2_FIND_LIBRARY    (GIOMM giomm true true)
-        _GTK2_ADD_TARGET      (GIOMM GTK2_DEPENDS gio glibmm gobject sigc++ glib)
-
-        _GTK2_FIND_INCLUDE_DIR(ATKMM atkmm.h)
-        _GTK2_FIND_LIBRARY    (ATKMM atkmm true true)
-        _GTK2_ADD_TARGET      (ATKMM GTK2_DEPENDS atk glibmm gobject sigc++ glib)
-
-        _GTK2_FIND_INCLUDE_DIR(CAIROMM cairomm/cairomm.h)
-        _GTK2_FIND_INCLUDE_DIR(CAIROMMCONFIG cairommconfig.h)
-        _GTK2_FIND_LIBRARY    (CAIROMM cairomm true true)
-        _GTK2_ADD_TARGET      (CAIROMM GTK2_DEPENDS cairo sigc++
-                                       OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                         ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                         ${GTK2_X11_INCLUDE_DIR})
-
-        _GTK2_FIND_INCLUDE_DIR(PANGOMM pangomm.h)
-        _GTK2_FIND_INCLUDE_DIR(PANGOMMCONFIG pangommconfig.h)
-        _GTK2_FIND_LIBRARY    (PANGOMM pangomm true true)
-        _GTK2_ADD_TARGET      (PANGOMM GTK2_DEPENDS glibmm sigc++ pango gobject glib
-                                       GTK2_OPTIONAL_DEPENDS cairomm pangocairo cairo
-                                       OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                         ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                         ${GTK2_X11_INCLUDE_DIR})
-
-        _GTK2_FIND_INCLUDE_DIR(GDKMM gdkmm.h)
-        _GTK2_FIND_INCLUDE_DIR(GDKMMCONFIG gdkmmconfig.h)
-        _GTK2_FIND_LIBRARY    (GDKMM gdkmm true true)
-        _GTK2_ADD_TARGET      (GDKMM GTK2_DEPENDS pangomm gtk glibmm sigc++ gdk atk pangoft2 gdk_pixbuf pango gobject glib
-                                     GTK2_OPTIONAL_DEPENDS giomm cairomm gio pangocairo cairo
-                                     OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                       ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                       ${GTK2_X11_INCLUDE_DIR})
-
-        _GTK2_FIND_INCLUDE_DIR(GTKMM gtkmm.h)
-        _GTK2_FIND_INCLUDE_DIR(GTKMMCONFIG gtkmmconfig.h)
-        _GTK2_FIND_LIBRARY    (GTKMM gtkmm true true)
-        _GTK2_ADD_TARGET      (GTKMM GTK2_DEPENDS atkmm gdkmm pangomm gtk glibmm sigc++ gdk atk pangoft2 gdk_pixbuf pango gthread gobject glib
-                                     GTK2_OPTIONAL_DEPENDS giomm cairomm gio pangocairo cairo
-                                     OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                       ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                       ${GTK2_X11_INCLUDE_DIR})
-
-    elseif(_GTK2_component STREQUAL "glade")
-
-        _GTK2_FIND_INCLUDE_DIR(GLADE glade/glade.h)
-        _GTK2_FIND_LIBRARY    (GLADE glade false true)
-        _GTK2_ADD_TARGET      (GLADE GTK2_DEPENDS gtk gdk atk gio pangoft2 gdk_pixbuf pango gobject glib
-                                     GTK2_OPTIONAL_DEPENDS pangocairo cairo
-                                     OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                       ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                       ${GTK2_X11_INCLUDE_DIR})
-
-    elseif(_GTK2_component STREQUAL "glademm")
-
-        _GTK2_FIND_INCLUDE_DIR(GLADEMM libglademm.h)
-        _GTK2_FIND_INCLUDE_DIR(GLADEMMCONFIG libglademmconfig.h)
-        _GTK2_FIND_LIBRARY    (GLADEMM glademm true true)
-        _GTK2_ADD_TARGET      (GLADEMM GTK2_DEPENDS gtkmm glade atkmm gdkmm giomm pangomm glibmm sigc++ gtk gdk atk pangoft2 gdk_pixbuf pango gthread gobject glib
-                                       GTK2_OPTIONAL_DEPENDS giomm cairomm gio pangocairo cairo
-                                       OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
-                                                         ${GTK2_FONTCONFIG_INCLUDE_DIR}
-                                                         ${GTK2_X11_INCLUDE_DIR})
-
-    else()
-        message(FATAL_ERROR "Unknown GTK2 component ${_component}")
-    endif()
-endforeach()
-
-#
-# Solve for the GTK2 version if we haven't already
-#
-if(NOT GTK2_FIND_VERSION AND GTK2_GTK_INCLUDE_DIR)
-    _GTK2_GET_VERSION(GTK2_MAJOR_VERSION
-                      GTK2_MINOR_VERSION
-                      GTK2_PATCH_VERSION
-                      ${GTK2_GTK_INCLUDE_DIR}/gtk/gtkversion.h)
-    set(GTK2_VERSION ${GTK2_MAJOR_VERSION}.${GTK2_MINOR_VERSION}.${GTK2_PATCH_VERSION})
-endif()
-
-#
-# Try to enforce components
-#
-
-set(_GTK2_did_we_find_everything true)  # This gets set to GTK2_FOUND
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-foreach(_GTK2_component ${GTK2_FIND_COMPONENTS})
-    string(TOUPPER ${_GTK2_component} _COMPONENT_UPPER)
-
-    set(GTK2_${_COMPONENT_UPPER}_FIND_QUIETLY ${GTK2_FIND_QUIETLY})
-
-    if(_GTK2_component STREQUAL "gtk")
-        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "Some or all of the gtk libraries were not found."
-            GTK2_GTK_LIBRARY
-            GTK2_GTK_INCLUDE_DIR
-
-            GTK2_GDK_INCLUDE_DIR
-            GTK2_GDKCONFIG_INCLUDE_DIR
-            GTK2_GDK_LIBRARY
-
-            GTK2_GLIB_INCLUDE_DIR
-            GTK2_GLIBCONFIG_INCLUDE_DIR
-            GTK2_GLIB_LIBRARY
-        )
-    elseif(_GTK2_component STREQUAL "gtkmm")
-        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "Some or all of the gtkmm libraries were not found."
-            GTK2_GTKMM_LIBRARY
-            GTK2_GTKMM_INCLUDE_DIR
-            GTK2_GTKMMCONFIG_INCLUDE_DIR
-
-            GTK2_GDKMM_INCLUDE_DIR
-            GTK2_GDKMMCONFIG_INCLUDE_DIR
-            GTK2_GDKMM_LIBRARY
-
-            GTK2_GLIBMM_INCLUDE_DIR
-            GTK2_GLIBMMCONFIG_INCLUDE_DIR
-            GTK2_GLIBMM_LIBRARY
-
-            FREETYPE_INCLUDE_DIR_ft2build
-            FREETYPE_INCLUDE_DIR_freetype2
-        )
-    elseif(_GTK2_component STREQUAL "glade")
-        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "The glade library was not found."
-            GTK2_GLADE_LIBRARY
-            GTK2_GLADE_INCLUDE_DIR
-        )
-    elseif(_GTK2_component STREQUAL "glademm")
-        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "The glademm library was not found."
-            GTK2_GLADEMM_LIBRARY
-            GTK2_GLADEMM_INCLUDE_DIR
-            GTK2_GLADEMMCONFIG_INCLUDE_DIR
-        )
-    endif()
-
-    if(NOT GTK2_${_COMPONENT_UPPER}_FOUND)
-        set(_GTK2_did_we_find_everything false)
-    endif()
-endforeach()
-
-if(_GTK2_did_we_find_everything AND NOT GTK2_VERSION_CHECK_FAILED)
-    set(GTK2_FOUND true)
-else()
-    # Unset our variables.
-    set(GTK2_FOUND false)
-    set(GTK2_VERSION)
-    set(GTK2_VERSION_MAJOR)
-    set(GTK2_VERSION_MINOR)
-    set(GTK2_VERSION_PATCH)
-    set(GTK2_INCLUDE_DIRS)
-    set(GTK2_LIBRARIES)
-    set(GTK2_DEFINITIONS)
-endif()
-
-if(GTK2_INCLUDE_DIRS)
-   list(REMOVE_DUPLICATES GTK2_INCLUDE_DIRS)
-endif()
-
diff --git a/share/cmake-3.2/Modules/FindGTest.cmake b/share/cmake-3.2/Modules/FindGTest.cmake
deleted file mode 100644
index e6b5b0a..0000000
--- a/share/cmake-3.2/Modules/FindGTest.cmake
+++ /dev/null
@@ -1,212 +0,0 @@
-#.rst:
-# FindGTest
-# ---------
-#
-# Locate the Google C++ Testing Framework.
-#
-# Defines the following variables:
-#
-# ::
-#
-#    GTEST_FOUND - Found the Google Testing framework
-#    GTEST_INCLUDE_DIRS - Include directories
-#
-#
-#
-# Also defines the library variables below as normal variables.  These
-# contain debug/optimized keywords when a debugging library is found.
-#
-# ::
-#
-#    GTEST_BOTH_LIBRARIES - Both libgtest & libgtest-main
-#    GTEST_LIBRARIES - libgtest
-#    GTEST_MAIN_LIBRARIES - libgtest-main
-#
-#
-#
-# Accepts the following variables as input:
-#
-# ::
-#
-#    GTEST_ROOT - (as a CMake or environment variable)
-#                 The root directory of the gtest install prefix
-#
-#
-#
-# ::
-#
-#    GTEST_MSVC_SEARCH - If compiling with MSVC, this variable can be set to
-#                        "MD" or "MT" to enable searching a GTest build tree
-#                        (defaults: "MD")
-#
-#
-#
-# Example Usage:
-#
-# ::
-#
-#     enable_testing()
-#     find_package(GTest REQUIRED)
-#     include_directories(${GTEST_INCLUDE_DIRS})
-#
-#
-#
-# ::
-#
-#     add_executable(foo foo.cc)
-#     target_link_libraries(foo ${GTEST_BOTH_LIBRARIES})
-#
-#
-#
-# ::
-#
-#     add_test(AllTestsInFoo foo)
-#
-#
-#
-#
-#
-# If you would like each Google test to show up in CTest as a test you
-# may use the following macro.  NOTE: It will slow down your tests by
-# running an executable for each test and test fixture.  You will also
-# have to rerun CMake after adding or removing tests or test fixtures.
-#
-# GTEST_ADD_TESTS(executable extra_args ARGN)
-#
-# ::
-#
-#     executable = The path to the test executable
-#     extra_args = Pass a list of extra arguments to be passed to
-#                  executable enclosed in quotes (or "" for none)
-#     ARGN =       A list of source files to search for tests & test
-#                  fixtures. Or AUTO to find them from executable target.
-#
-#
-#
-# ::
-#
-#   Example:
-#      set(FooTestArgs --foo 1 --bar 2)
-#      add_executable(FooTest FooUnitTest.cc)
-#      GTEST_ADD_TESTS(FooTest "${FooTestArgs}" AUTO)
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-# Copyright 2009 Philip Lowman <philip@yhbt.com>
-# Copyright 2009 Daniel Blezek <blezek@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-#
-# Thanks to Daniel Blezek <blezek@gmail.com> for the GTEST_ADD_TESTS code
-
-function(GTEST_ADD_TESTS executable extra_args)
-    if(NOT ARGN)
-        message(FATAL_ERROR "Missing ARGN: Read the documentation for GTEST_ADD_TESTS")
-    endif()
-    if(ARGN STREQUAL "AUTO")
-        # obtain sources used for building that executable
-        get_property(ARGN TARGET ${executable} PROPERTY SOURCES)
-    endif()
-    set(gtest_case_name_regex ".*\\( *([A-Za-z_0-9]+), *([A-Za-z_0-9]+) *\\).*")
-    set(gtest_test_type_regex "(TYPED_TEST|TEST_?[FP]?)")
-    foreach(source ${ARGN})
-        file(READ "${source}" contents)
-        string(REGEX MATCHALL "${gtest_test_type_regex}\\(([A-Za-z_0-9 ,]+)\\)" found_tests ${contents})
-        foreach(hit ${found_tests})
-          string(REGEX MATCH "${gtest_test_type_regex}" test_type ${hit})
-
-          # Parameterized tests have a different signature for the filter
-          if(${test_type} STREQUAL "TEST_P")
-            string(REGEX REPLACE ${gtest_case_name_regex}  "*/\\1.\\2/*" test_name ${hit})
-          elseif(${test_type} STREQUAL "TEST_F" OR ${test_type} STREQUAL "TEST")
-            string(REGEX REPLACE ${gtest_case_name_regex} "\\1.\\2" test_name ${hit})
-          elseif(${test_type} STREQUAL "TYPED_TEST")
-            string(REGEX REPLACE ${gtest_case_name_regex} "\\1/*.\\2" test_name ${hit})
-          else()
-            message(WARNING "Could not parse GTest ${hit} for adding to CTest.")
-            continue()
-          endif()
-          add_test(NAME ${test_name} COMMAND ${executable} --gtest_filter=${test_name} ${extra_args})
-        endforeach()
-    endforeach()
-endfunction()
-
-function(_gtest_append_debugs _endvar _library)
-    if(${_library} AND ${_library}_DEBUG)
-        set(_output optimized ${${_library}} debug ${${_library}_DEBUG})
-    else()
-        set(_output ${${_library}})
-    endif()
-    set(${_endvar} ${_output} PARENT_SCOPE)
-endfunction()
-
-function(_gtest_find_library _name)
-    find_library(${_name}
-        NAMES ${ARGN}
-        HINTS
-            ENV GTEST_ROOT
-            ${GTEST_ROOT}
-        PATH_SUFFIXES ${_gtest_libpath_suffixes}
-    )
-    mark_as_advanced(${_name})
-endfunction()
-
-#
-
-if(NOT DEFINED GTEST_MSVC_SEARCH)
-    set(GTEST_MSVC_SEARCH MD)
-endif()
-
-set(_gtest_libpath_suffixes lib)
-if(MSVC)
-    if(GTEST_MSVC_SEARCH STREQUAL "MD")
-        list(APPEND _gtest_libpath_suffixes
-            msvc/gtest-md/Debug
-            msvc/gtest-md/Release)
-    elseif(GTEST_MSVC_SEARCH STREQUAL "MT")
-        list(APPEND _gtest_libpath_suffixes
-            msvc/gtest/Debug
-            msvc/gtest/Release)
-    endif()
-endif()
-
-
-find_path(GTEST_INCLUDE_DIR gtest/gtest.h
-    HINTS
-        $ENV{GTEST_ROOT}/include
-        ${GTEST_ROOT}/include
-)
-mark_as_advanced(GTEST_INCLUDE_DIR)
-
-if(MSVC AND GTEST_MSVC_SEARCH STREQUAL "MD")
-    # The provided /MD project files for Google Test add -md suffixes to the
-    # library names.
-    _gtest_find_library(GTEST_LIBRARY            gtest-md  gtest)
-    _gtest_find_library(GTEST_LIBRARY_DEBUG      gtest-mdd gtestd)
-    _gtest_find_library(GTEST_MAIN_LIBRARY       gtest_main-md  gtest_main)
-    _gtest_find_library(GTEST_MAIN_LIBRARY_DEBUG gtest_main-mdd gtest_maind)
-else()
-    _gtest_find_library(GTEST_LIBRARY            gtest)
-    _gtest_find_library(GTEST_LIBRARY_DEBUG      gtestd)
-    _gtest_find_library(GTEST_MAIN_LIBRARY       gtest_main)
-    _gtest_find_library(GTEST_MAIN_LIBRARY_DEBUG gtest_maind)
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTest DEFAULT_MSG GTEST_LIBRARY GTEST_INCLUDE_DIR GTEST_MAIN_LIBRARY)
-
-if(GTEST_FOUND)
-    set(GTEST_INCLUDE_DIRS ${GTEST_INCLUDE_DIR})
-    _gtest_append_debugs(GTEST_LIBRARIES      GTEST_LIBRARY)
-    _gtest_append_debugs(GTEST_MAIN_LIBRARIES GTEST_MAIN_LIBRARY)
-    set(GTEST_BOTH_LIBRARIES ${GTEST_LIBRARIES} ${GTEST_MAIN_LIBRARIES})
-endif()
-
diff --git a/share/cmake-3.2/Modules/FindGit.cmake b/share/cmake-3.2/Modules/FindGit.cmake
deleted file mode 100644
index b4f7b4b..0000000
--- a/share/cmake-3.2/Modules/FindGit.cmake
+++ /dev/null
@@ -1,79 +0,0 @@
-#.rst:
-# FindGit
-# -------
-#
-#
-#
-# The module defines the following variables:
-#
-# ::
-#
-#    GIT_EXECUTABLE - path to git command line client
-#    GIT_FOUND - true if the command line client was found
-#    GIT_VERSION_STRING - the version of git found (since CMake 2.8.8)
-#
-# Example usage:
-#
-# ::
-#
-#    find_package(Git)
-#    if(GIT_FOUND)
-#      message("git found: ${GIT_EXECUTABLE}")
-#    endif()
-
-#=============================================================================
-# Copyright 2010 Kitware, Inc.
-# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Look for 'git' or 'eg' (easy git)
-#
-set(git_names git eg)
-
-# Prefer .cmd variants on Windows unless running in a Makefile
-# in the MSYS shell.
-#
-if(WIN32)
-  if(NOT CMAKE_GENERATOR MATCHES "MSYS")
-    set(git_names git.cmd git eg.cmd eg)
-    # GitHub search path for Windows
-    set(github_path "$ENV{LOCALAPPDATA}/Github/PortableGit*/bin")
-    file(GLOB github_path "${github_path}")
-  endif()
-endif()
-
-find_program(GIT_EXECUTABLE
-  NAMES ${git_names}
-  PATHS ${github_path}
-  PATH_SUFFIXES Git/cmd Git/bin
-  DOC "git command line client"
-  )
-mark_as_advanced(GIT_EXECUTABLE)
-
-if(GIT_EXECUTABLE)
-  execute_process(COMMAND ${GIT_EXECUTABLE} --version
-                  OUTPUT_VARIABLE git_version
-                  ERROR_QUIET
-                  OUTPUT_STRIP_TRAILING_WHITESPACE)
-  if (git_version MATCHES "^git version [0-9]")
-    string(REPLACE "git version " "" GIT_VERSION_STRING "${git_version}")
-  endif()
-  unset(git_version)
-endif()
-
-# Handle the QUIETLY and REQUIRED arguments and set GIT_FOUND to TRUE if
-# all listed variables are TRUE
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(Git
-                                  REQUIRED_VARS GIT_EXECUTABLE
-                                  VERSION_VAR GIT_VERSION_STRING)
diff --git a/share/cmake-3.2/Modules/FindHDF5.cmake b/share/cmake-3.2/Modules/FindHDF5.cmake
deleted file mode 100644
index 0d58e13..0000000
--- a/share/cmake-3.2/Modules/FindHDF5.cmake
+++ /dev/null
@@ -1,364 +0,0 @@
-#.rst:
-# FindHDF5
-# --------
-#
-# Find HDF5, a library for reading and writing self describing array data.
-#
-#
-#
-# This module invokes the HDF5 wrapper compiler that should be installed
-# alongside HDF5.  Depending upon the HDF5 Configuration, the wrapper
-# compiler is called either h5cc or h5pcc.  If this succeeds, the module
-# will then call the compiler with the -show argument to see what flags
-# are used when compiling an HDF5 client application.
-#
-# The module will optionally accept the COMPONENTS argument.  If no
-# COMPONENTS are specified, then the find module will default to finding
-# only the HDF5 C library.  If one or more COMPONENTS are specified, the
-# module will attempt to find the language bindings for the specified
-# components.  The only valid components are C, CXX, Fortran, HL, and
-# Fortran_HL.  If the COMPONENTS argument is not given, the module will
-# attempt to find only the C bindings.
-#
-# On UNIX systems, this module will read the variable
-# HDF5_USE_STATIC_LIBRARIES to determine whether or not to prefer a
-# static link to a dynamic link for HDF5 and all of it's dependencies.
-# To use this feature, make sure that the HDF5_USE_STATIC_LIBRARIES
-# variable is set before the call to find_package.
-#
-# To provide the module with a hint about where to find your HDF5
-# installation, you can set the environment variable HDF5_ROOT.  The
-# Find module will then look in this path when searching for HDF5
-# executables, paths, and libraries.
-#
-# In addition to finding the includes and libraries required to compile
-# an HDF5 client application, this module also makes an effort to find
-# tools that come with the HDF5 distribution that may be useful for
-# regression testing.
-#
-# This module will define the following variables:
-#
-# ::
-#
-#   HDF5_INCLUDE_DIRS - Location of the hdf5 includes
-#   HDF5_INCLUDE_DIR - Location of the hdf5 includes (deprecated)
-#   HDF5_DEFINITIONS - Required compiler definitions for HDF5
-#   HDF5_C_LIBRARIES - Required libraries for the HDF5 C bindings.
-#   HDF5_CXX_LIBRARIES - Required libraries for the HDF5 C++ bindings
-#   HDF5_Fortran_LIBRARIES - Required libraries for the HDF5 Fortran bindings
-#   HDF5_HL_LIBRARIES - Required libraries for the HDF5 high level API
-#   HDF5_Fortran_HL_LIBRARIES - Required libraries for the high level Fortran
-#                               bindings.
-#   HDF5_LIBRARIES - Required libraries for all requested bindings
-#   HDF5_FOUND - true if HDF5 was found on the system
-#   HDF5_LIBRARY_DIRS - the full set of library directories
-#   HDF5_IS_PARALLEL - Whether or not HDF5 was found with parallel IO support
-#   HDF5_C_COMPILER_EXECUTABLE - the path to the HDF5 C wrapper compiler
-#   HDF5_CXX_COMPILER_EXECUTABLE - the path to the HDF5 C++ wrapper compiler
-#   HDF5_Fortran_COMPILER_EXECUTABLE - the path to the HDF5 Fortran wrapper compiler
-#   HDF5_DIFF_EXECUTABLE - the path to the HDF5 dataset comparison tool
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is maintained by Will Dicharry <wdicharry@stellarscience.com>.
-
-include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-# List of the valid HDF5 components
-set( HDF5_VALID_COMPONENTS
-    C
-    CXX
-    Fortran
-    HL
-    Fortran_HL
-)
-
-# Validate the list of find components.
-if( NOT HDF5_FIND_COMPONENTS )
-    set( HDF5_LANGUAGE_BINDINGS "C" )
-else()
-    # add the extra specified components, ensuring that they are valid.
-    foreach( component ${HDF5_FIND_COMPONENTS} )
-        list( FIND HDF5_VALID_COMPONENTS ${component} component_location )
-        if( ${component_location} EQUAL -1 )
-            message( FATAL_ERROR
-                "\"${component}\" is not a valid HDF5 component." )
-        else()
-            list( APPEND HDF5_LANGUAGE_BINDINGS ${component} )
-        endif()
-    endforeach()
-endif()
-
-# try to find the HDF5 wrapper compilers
-find_program( HDF5_C_COMPILER_EXECUTABLE
-    NAMES h5cc h5pcc
-    HINTS ENV HDF5_ROOT
-    PATH_SUFFIXES bin Bin
-    DOC "HDF5 Wrapper compiler.  Used only to detect HDF5 compile flags." )
-mark_as_advanced( HDF5_C_COMPILER_EXECUTABLE )
-
-find_program( HDF5_CXX_COMPILER_EXECUTABLE
-    NAMES h5c++ h5pc++
-    HINTS ENV HDF5_ROOT
-    PATH_SUFFIXES bin Bin
-    DOC "HDF5 C++ Wrapper compiler.  Used only to detect HDF5 compile flags." )
-mark_as_advanced( HDF5_CXX_COMPILER_EXECUTABLE )
-
-find_program( HDF5_Fortran_COMPILER_EXECUTABLE
-    NAMES h5fc h5pfc
-    HINTS ENV HDF5_ROOT
-    PATH_SUFFIXES bin Bin
-    DOC "HDF5 Fortran Wrapper compiler.  Used only to detect HDF5 compile flags." )
-mark_as_advanced( HDF5_Fortran_COMPILER_EXECUTABLE )
-
-find_program( HDF5_DIFF_EXECUTABLE
-    NAMES h5diff
-    HINTS ENV HDF5_ROOT
-    PATH_SUFFIXES bin Bin
-    DOC "HDF5 file differencing tool." )
-mark_as_advanced( HDF5_DIFF_EXECUTABLE )
-
-# Invoke the HDF5 wrapper compiler.  The compiler return value is stored to the
-# return_value argument, the text output is stored to the output variable.
-macro( _HDF5_invoke_compiler language output return_value )
-    if( HDF5_${language}_COMPILER_EXECUTABLE )
-        exec_program( ${HDF5_${language}_COMPILER_EXECUTABLE}
-            ARGS -show
-            OUTPUT_VARIABLE ${output}
-            RETURN_VALUE ${return_value}
-        )
-        if( ${${return_value}} EQUAL 0 )
-            # do nothing
-        else()
-            message( STATUS
-              "Unable to determine HDF5 ${language} flags from HDF5 wrapper." )
-        endif()
-    endif()
-endmacro()
-
-# Parse a compile line for definitions, includes, library paths, and libraries.
-macro( _HDF5_parse_compile_line
-    compile_line_var
-    include_paths
-    definitions
-    library_paths
-    libraries )
-
-    # Match the include paths
-    string( REGEX MATCHALL "-I([^\" ]+)" include_path_flags
-        "${${compile_line_var}}"
-    )
-    foreach( IPATH ${include_path_flags} )
-        string( REGEX REPLACE "^-I" "" IPATH ${IPATH} )
-        string( REPLACE "//" "/" IPATH ${IPATH} )
-        list( APPEND ${include_paths} ${IPATH} )
-    endforeach()
-
-    # Match the definitions
-    string( REGEX MATCHALL "-D[^ ]*" definition_flags "${${compile_line_var}}" )
-    foreach( DEF ${definition_flags} )
-        list( APPEND ${definitions} ${DEF} )
-    endforeach()
-
-    # Match the library paths
-    string( REGEX MATCHALL "-L([^\" ]+|\"[^\"]+\")" library_path_flags
-        "${${compile_line_var}}"
-    )
-
-    foreach( LPATH ${library_path_flags} )
-        string( REGEX REPLACE "^-L" "" LPATH ${LPATH} )
-        string( REPLACE "//" "/" LPATH ${LPATH} )
-        list( APPEND ${library_paths} ${LPATH} )
-    endforeach()
-
-    # now search for the library names specified in the compile line (match -l...)
-    # match only -l's preceded by a space or comma
-    # this is to exclude directory names like xxx-linux/
-    string( REGEX MATCHALL "[, ]-l([^\", ]+)" library_name_flags
-        "${${compile_line_var}}" )
-    # strip the -l from all of the library flags and add to the search list
-    foreach( LIB ${library_name_flags} )
-        string( REGEX REPLACE "^[, ]-l" "" LIB ${LIB} )
-        list( APPEND ${libraries} ${LIB} )
-    endforeach()
-endmacro()
-
-# Try to find HDF5 using an installed hdf5-config.cmake
-if( NOT HDF5_FOUND )
-    find_package( HDF5 QUIET NO_MODULE )
-    if( HDF5_FOUND )
-        set( HDF5_INCLUDE_DIRS ${HDF5_INCLUDE_DIR} )
-        set( HDF5_LIBRARIES )
-        set( HDF5_C_TARGET hdf5 )
-        set( HDF5_CXX_TARGET hdf5_cpp )
-        set( HDF5_HL_TARGET hdf5_hl )
-        set( HDF5_Fortran_TARGET hdf5_fortran )
-        set( HDF5_Fortran_HL_TARGET hdf5_hl_fortran )
-        foreach( _component ${HDF5_LANGUAGE_BINDINGS} )
-            list( FIND HDF5_VALID_COMPONENTS ${_component} _component_location )
-            get_target_property( _comp_location ${HDF5_${_component}_TARGET} LOCATION )
-            if( _comp_location )
-                set( HDF5_${_component}_LIBRARY ${_comp_location} CACHE PATH
-                    "HDF5 ${_component} library" )
-                mark_as_advanced( HDF5_${_component}_LIBRARY )
-                list( APPEND HDF5_LIBRARIES ${HDF5_${_component}_LIBRARY} )
-            endif()
-        endforeach()
-    endif()
-endif()
-
-if( NOT HDF5_FOUND )
-    _HDF5_invoke_compiler( C HDF5_C_COMPILE_LINE HDF5_C_RETURN_VALUE )
-    _HDF5_invoke_compiler( CXX HDF5_CXX_COMPILE_LINE HDF5_CXX_RETURN_VALUE )
-    _HDF5_invoke_compiler( Fortran HDF5_Fortran_COMPILE_LINE HDF5_Fortran_RETURN_VALUE )
-
-    # seed the initial lists of libraries to find with items we know we need
-    set( HDF5_C_LIBRARY_NAMES_INIT hdf5 )
-    set( HDF5_HL_LIBRARY_NAMES_INIT hdf5_hl ${HDF5_C_LIBRARY_NAMES_INIT} )
-    set( HDF5_CXX_LIBRARY_NAMES_INIT hdf5_cpp ${HDF5_C_LIBRARY_NAMES_INIT} )
-    set( HDF5_Fortran_LIBRARY_NAMES_INIT hdf5_fortran
-        ${HDF5_C_LIBRARY_NAMES_INIT} )
-    set( HDF5_Fortran_HL_LIBRARY_NAMES_INIT hdf5hl_fortran
-        ${HDF5_Fortran_LIBRARY_NAMES_INIT} )
-
-    foreach( LANGUAGE ${HDF5_LANGUAGE_BINDINGS} )
-        if( HDF5_${LANGUAGE}_COMPILE_LINE )
-            _HDF5_parse_compile_line( HDF5_${LANGUAGE}_COMPILE_LINE
-                HDF5_${LANGUAGE}_INCLUDE_FLAGS
-                HDF5_${LANGUAGE}_DEFINITIONS
-                HDF5_${LANGUAGE}_LIBRARY_DIRS
-                HDF5_${LANGUAGE}_LIBRARY_NAMES
-            )
-
-            # take a guess that the includes may be in the 'include' sibling
-            # directory of a library directory.
-            foreach( dir ${HDF5_${LANGUAGE}_LIBRARY_DIRS} )
-                list( APPEND HDF5_${LANGUAGE}_INCLUDE_FLAGS ${dir}/../include )
-            endforeach()
-        endif()
-
-        # set the definitions for the language bindings.
-        list( APPEND HDF5_DEFINITIONS ${HDF5_${LANGUAGE}_DEFINITIONS} )
-
-        # find the HDF5 include directories
-        if(${LANGUAGE} MATCHES "Fortran")
-            set(HDF5_INCLUDE_FILENAME hdf5.mod)
-        else()
-            set(HDF5_INCLUDE_FILENAME hdf5.h)
-        endif()
-
-        find_path( HDF5_${LANGUAGE}_INCLUDE_DIR ${HDF5_INCLUDE_FILENAME}
-            HINTS
-                ${HDF5_${LANGUAGE}_INCLUDE_FLAGS}
-                ENV
-                    HDF5_ROOT
-            PATHS
-                $ENV{HOME}/.local/include
-            PATH_SUFFIXES
-                include
-                Include
-        )
-        mark_as_advanced( HDF5_${LANGUAGE}_INCLUDE_DIR )
-        list( APPEND HDF5_INCLUDE_DIRS ${HDF5_${LANGUAGE}_INCLUDE_DIR} )
-
-        set( HDF5_${LANGUAGE}_LIBRARY_NAMES
-            ${HDF5_${LANGUAGE}_LIBRARY_NAMES_INIT}
-            ${HDF5_${LANGUAGE}_LIBRARY_NAMES} )
-
-        # find the HDF5 libraries
-        foreach( LIB ${HDF5_${LANGUAGE}_LIBRARY_NAMES} )
-            if( UNIX AND HDF5_USE_STATIC_LIBRARIES )
-                # According to bug 1643 on the CMake bug tracker, this is the
-                # preferred method for searching for a static library.
-                # See http://www.cmake.org/Bug/view.php?id=1643.  We search
-                # first for the full static library name, but fall back to a
-                # generic search on the name if the static search fails.
-                set( THIS_LIBRARY_SEARCH_DEBUG lib${LIB}d.a ${LIB}d )
-                set( THIS_LIBRARY_SEARCH_RELEASE lib${LIB}.a ${LIB} )
-            else()
-                set( THIS_LIBRARY_SEARCH_DEBUG ${LIB}d )
-                set( THIS_LIBRARY_SEARCH_RELEASE ${LIB} )
-            endif()
-            find_library( HDF5_${LIB}_LIBRARY_DEBUG
-                NAMES ${THIS_LIBRARY_SEARCH_DEBUG}
-                HINTS ${HDF5_${LANGUAGE}_LIBRARY_DIRS}
-                ENV HDF5_ROOT
-                PATH_SUFFIXES lib Lib )
-            find_library( HDF5_${LIB}_LIBRARY_RELEASE
-                NAMES ${THIS_LIBRARY_SEARCH_RELEASE}
-                HINTS ${HDF5_${LANGUAGE}_LIBRARY_DIRS}
-                ENV HDF5_ROOT
-                PATH_SUFFIXES lib Lib )
-            select_library_configurations( HDF5_${LIB} )
-            list(APPEND HDF5_${LANGUAGE}_LIBRARIES ${HDF5_${LIB}_LIBRARY})
-        endforeach()
-        list( APPEND HDF5_LIBRARY_DIRS ${HDF5_${LANGUAGE}_LIBRARY_DIRS} )
-
-        # Append the libraries for this language binding to the list of all
-        # required libraries.
-        list(APPEND HDF5_LIBRARIES ${HDF5_${LANGUAGE}_LIBRARIES})
-    endforeach()
-
-    # We may have picked up some duplicates in various lists during the above
-    # process for the language bindings (both the C and C++ bindings depend on
-    # libz for example).  Remove the duplicates. It appears that the default
-    # CMake behavior is to remove duplicates from the end of a list. However,
-    # for link lines, this is incorrect since unresolved symbols are searched
-    # for down the link line. Therefore, we reverse the list, remove the
-    # duplicates, and then reverse it again to get the duplicates removed from
-    # the beginning.
-    macro( _remove_duplicates_from_beginning _list_name )
-        list( REVERSE ${_list_name} )
-        list( REMOVE_DUPLICATES ${_list_name} )
-        list( REVERSE ${_list_name} )
-    endmacro()
-
-    if( HDF5_INCLUDE_DIRS )
-        _remove_duplicates_from_beginning( HDF5_INCLUDE_DIRS )
-    endif()
-    if( HDF5_LIBRARY_DIRS )
-        _remove_duplicates_from_beginning( HDF5_LIBRARY_DIRS )
-    endif()
-
-    # If the HDF5 include directory was found, open H5pubconf.h to determine if
-    # HDF5 was compiled with parallel IO support
-    set( HDF5_IS_PARALLEL FALSE )
-    foreach( _dir IN LISTS HDF5_INCLUDE_DIRS )
-        if( EXISTS "${_dir}/H5pubconf.h" )
-            file( STRINGS "${_dir}/H5pubconf.h"
-                HDF5_HAVE_PARALLEL_DEFINE
-                REGEX "HAVE_PARALLEL 1" )
-            if( HDF5_HAVE_PARALLEL_DEFINE )
-                set( HDF5_IS_PARALLEL TRUE )
-            endif()
-        endif()
-    endforeach()
-    set( HDF5_IS_PARALLEL ${HDF5_IS_PARALLEL} CACHE BOOL
-        "HDF5 library compiled with parallel IO support" )
-    mark_as_advanced( HDF5_IS_PARALLEL )
-
-    # For backwards compatibility we set HDF5_INCLUDE_DIR to the value of
-    # HDF5_INCLUDE_DIRS
-    if( HDF5_INCLUDE_DIRS )
-        set( HDF5_INCLUDE_DIR "${HDF5_INCLUDE_DIRS}" )
-    endif()
-
-endif()
-
-find_package_handle_standard_args( HDF5 DEFAULT_MSG
-    HDF5_LIBRARIES
-    HDF5_INCLUDE_DIRS
-)
-
diff --git a/share/cmake-3.2/Modules/FindHg.cmake b/share/cmake-3.2/Modules/FindHg.cmake
deleted file mode 100644
index 34d763e..0000000
--- a/share/cmake-3.2/Modules/FindHg.cmake
+++ /dev/null
@@ -1,100 +0,0 @@
-#.rst:
-# FindHg
-# ------
-#
-# Extract information from a mercurial working copy.
-#
-# The module defines the following variables:
-#
-# ::
-#
-#    HG_EXECUTABLE - path to mercurial command line client (hg)
-#    HG_FOUND - true if the command line client was found
-#    HG_VERSION_STRING - the version of mercurial found
-#
-# If the command line client executable is found the following macro is defined:
-#
-# ::
-#
-#   HG_WC_INFO(<dir> <var-prefix>)
-#
-# Hg_WC_INFO extracts information of a mercurial working copy
-# at a given location.  This macro defines the following variables:
-#
-# ::
-#
-#   <var-prefix>_WC_CHANGESET - current changeset
-#   <var-prefix>_WC_REVISION - current revision
-#
-# Example usage:
-#
-# ::
-#
-#    find_package(Hg)
-#    if(HG_FOUND)
-#      message("hg found: ${HG_EXECUTABLE}")
-#      HG_WC_INFO(${PROJECT_SOURCE_DIR} Project)
-#      message("Current revision is ${Project_WC_REVISION}")
-#      message("Current changeset is ${Project_WC_CHANGESET}")
-#    endif()
-
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-# Copyright 2012      Rolf Eike Beer <eike@sf-mail.de>
-# Copyright 2014      Matthaeus G. Chajdas
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-find_program(HG_EXECUTABLE
-  NAMES hg
-  PATHS
-    [HKEY_LOCAL_MACHINE\\Software\\TortoiseHG]
-  PATH_SUFFIXES Mercurial
-  DOC "hg command line client"
-  )
-mark_as_advanced(HG_EXECUTABLE)
-
-if(HG_EXECUTABLE)
-  execute_process(COMMAND ${HG_EXECUTABLE} --version
-                  OUTPUT_VARIABLE hg_version
-                  ERROR_QUIET
-                  RESULT_VARIABLE hg_result
-                  OUTPUT_STRIP_TRAILING_WHITESPACE)
-  if(hg_result MATCHES "is not a valid Win32 application")
-    set_property(CACHE HG_EXECUTABLE PROPERTY VALUE "HG_EXECUTABLE-NOTFOUND")
-  endif()
-  if(hg_version MATCHES "^Mercurial Distributed SCM \\(version ([0-9][^)]*)\\)")
-    set(HG_VERSION_STRING "${CMAKE_MATCH_1}")
-  endif()
-  unset(hg_version)
-
-  macro(HG_WC_INFO dir prefix)
-    execute_process(COMMAND ${HG_EXECUTABLE} id -i -n
-      WORKING_DIRECTORY ${dir}
-      RESULT_VARIABLE hg_id_result
-      ERROR_VARIABLE hg_id_error
-      OUTPUT_VARIABLE ${prefix}_WC_DATA
-      OUTPUT_STRIP_TRAILING_WHITESPACE)
-    if(NOT ${hg_id_result} EQUAL 0)
-      message(SEND_ERROR "Command \"${HG_EXECUTBALE} id -n\" in directory ${dir} failed with output:\n${hg_id_error}")
-    endif()
-
-    string(REGEX REPLACE "([0-9a-f]+)\\+? [0-9]+\\+?" "\\1" ${prefix}_WC_CHANGESET ${${prefix}_WC_DATA})
-    string(REGEX REPLACE "[0-9a-f]+\\+? ([0-9]+)\\+?" "\\1" ${prefix}_WC_REVISION ${${prefix}_WC_DATA})
-  endmacro(HG_WC_INFO)
-endif()
-
-# Handle the QUIETLY and REQUIRED arguments and set HG_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(Hg
-                                  REQUIRED_VARS HG_EXECUTABLE
-                                  VERSION_VAR HG_VERSION_STRING)
diff --git a/share/cmake-3.2/Modules/FindIce.cmake b/share/cmake-3.2/Modules/FindIce.cmake
deleted file mode 100644
index 8493d80..0000000
--- a/share/cmake-3.2/Modules/FindIce.cmake
+++ /dev/null
@@ -1,393 +0,0 @@
-#.rst:
-# FindIce
-# -------
-#
-# Find the ZeroC Internet Communication Engine (ICE) programs,
-# libraries and datafiles.
-#
-# This module supports multiple components.
-# Components can include any of: ``Freeze``, ``Glacier2``, ``Ice``,
-# ``IceBox``, ``IceDB``, ``IceGrid``, ``IcePatch``, ``IceSSL``,
-# ``IceStorm``, ``IceUtil``, ``IceXML``, or ``Slice``.
-#
-# This module reports information about the Ice installation in
-# several variables.  General variables::
-#
-#   Ice_VERSION - Ice release version
-#   Ice_FOUND - true if the main programs and libraries were found
-#   Ice_LIBRARIES - component libraries to be linked
-#   Ice_INCLUDE_DIRS - the directories containing the Ice headers
-#   Ice_SLICE_DIRS - the directories containing the Ice slice interface
-#                    definitions
-#
-# Ice programs are reported in::
-#
-#   Ice_SLICE2CPP_EXECUTABLE - path to slice2cpp executable
-#   Ice_SLICE2CS_EXECUTABLE - path to slice2cs executable
-#   Ice_SLICE2FREEZEJ_EXECUTABLE - path to slice2freezej executable
-#   Ice_SLICE2FREEZE_EXECUTABLE - path to slice2freeze executable
-#   Ice_SLICE2HTML_EXECUTABLE - path to slice2html executable
-#   Ice_SLICE2JAVA_EXECUTABLE - path to slice2java executable
-#   Ice_SLICE2PHP_EXECUTABLE - path to slice2php executable
-#   Ice_SLICE2PY_EXECUTABLE - path to slice2py executable
-#   Ice_SLICE2RB_EXECUTABLE - path to slice2rb executable
-#
-# Ice component libraries are reported in::
-#
-#   Ice_<C>_FOUND - ON if component was found
-#   Ice_<C>_LIBRARIES - libraries for component
-#
-# Note that ``<C>`` is the uppercased name of the component.
-#
-# This module reads hints about search results from::
-#
-#   Ice_HOME - the root of the Ice installation
-#
-# The environment variable ``ICE_HOME`` may also be used; the
-# Ice_HOME variable takes precedence.
-#
-# The following cache variables may also be set::
-#
-#   Ice_<P>_EXECUTABLE - the path to executable <P>
-#   Ice_INCLUDE_DIR - the directory containing the Ice headers
-#   Ice_SLICE_DIR - the directory containing the Ice slice interface
-#                   definitions
-#   Ice_<C>_LIBRARY - the library for component <C>
-#
-# .. note::
-#
-#   In most cases none of the above variables will require setting,
-#   unless multiple Ice versions are available and a specific version
-#   is required.  On Windows, the most recent version of Ice will be
-#   found through the registry.  On Unix, the programs, headers and
-#   libraries will usually be in standard locations, but Ice_SLICE_DIRS
-#   might not be automatically detected (commonly known locations are
-#   searched).  All the other variables are defaulted using Ice_HOME,
-#   if set.  It's possible to set Ice_HOME and selectively specify
-#   alternative locations for the other components; this might be
-#   required for e.g. newer versions of Visual Studio if the
-#   heuristics are not sufficient to identify the correct programs and
-#   libraries for the specific Visual Studio version.
-#
-# Other variables one may set to control this module are::
-#
-#   Ice_DEBUG - Set to ON to enable debug output from FindIce.
-
-# Written by Roger Leigh <rleigh@codelibre.net>
-
-#=============================================================================
-# Copyright 2014 University of Dundee
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# The Ice checks are contained in a function due to the large number
-# of temporary variables needed.
-function(_Ice_FIND)
-  # Released versions of Ice, including generic short forms
-  set(ice_versions
-      3
-      3.5
-      3.5.1
-      3.5.0
-      3.4
-      3.4.2
-      3.4.1
-      3.4.0
-      3.3
-      3.3.1
-      3.3.0)
-
-  # Set up search paths, taking compiler into account.  Search Ice_HOME,
-  # with ICE_HOME in the environment as a fallback if unset.
-  if(Ice_HOME)
-    list(APPEND ice_roots "${Ice_HOME}")
-  else()
-    if(NOT "$ENV{ICE_HOME}" STREQUAL "")
-      file(TO_CMAKE_PATH "$ENV{ICE_HOME}" NATIVE_PATH)
-      list(APPEND ice_roots "${NATIVE_PATH}")
-      set(Ice_HOME "${NATIVE_PATH}"
-          CACHE PATH "Location of the Ice installation" FORCE)
-    endif()
-  endif()
-
-  if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-    # 64-bit path suffix
-    set(_x64 "/x64")
-    # 64-bit library directory
-    set(_lib64 "lib64")
-  endif()
-
-  if(MSVC_VERSION)
-    # VS 8.0
-    if(NOT MSVC_VERSION VERSION_LESS 1400 AND MSVC_VERSION VERSION_LESS 1500)
-      set(vcver "vc80")
-      set(vcyear "2005")
-    # VS 9.0
-    elseif(NOT MSVC_VERSION VERSION_LESS 1500 AND MSVC_VERSION VERSION_LESS 1600)
-      set(vcver "vc90")
-      set(vcyear "2008")
-    # VS 10.0
-    elseif(NOT MSVC_VERSION VERSION_LESS 1600 AND MSVC_VERSION VERSION_LESS 1700)
-      set(vcver "vc100")
-    # VS 11.0
-    elseif(NOT MSVC_VERSION VERSION_LESS 1700 AND MSVC_VERSION VERSION_LESS 1800)
-      set(vcver "vc110")
-    # VS 12.0
-    elseif(NOT MSVC_VERSION VERSION_LESS 1800 AND MSVC_VERSION VERSION_LESS 1900)
-      set(vcver "vc120")
-    # VS 14.0
-    elseif(NOT MSVC_VERSION VERSION_LESS 1900 AND MSVC_VERSION VERSION_LESS 2000)
-      set(vcver "vc140")
-    endif()
-  endif()
-
-  # For compatibility with ZeroC Windows builds.
-  if(vcver)
-    # Earlier Ice (3.3) builds don't use vcnnn subdirectories, but are harmless to check.
-    list(APPEND ice_binary_suffixes "bin/${vcver}${_x64}" "bin/${vcver}")
-    list(APPEND ice_library_suffixes "lib/${vcver}${_x64}" "lib/${vcver}")
-  endif()
-  # Generic 64-bit and 32-bit directories
-  list(APPEND ice_binary_suffixes "bin${_x64}" "bin")
-  list(APPEND ice_library_suffixes "${_lib64}" "lib${_x64}" "lib")
-  list(APPEND ice_include_suffixes "include")
-  list(APPEND ice_slice_suffixes "slice")
-
-  # On Windows, look in the registry for install locations.  Different
-  # versions of Ice install support different compiler versions.
-  if(vcver)
-    foreach(ice_version ${ice_versions})
-      # Ice 3.3 releases use a Visual Studio year suffix and value is
-      # enclosed in double quotes, though only the leading quote is
-      # returned by get_filename_component.
-      unset(ice_location)
-      if(vcyear)
-        get_filename_component(ice_location
-                               "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ZeroC\\Ice ${ice_version} for Visual Studio ${vcyear};InstallDir]"
-                               PATH)
-        if(ice_location AND NOT ("${ice_location}" STREQUAL "/registry" OR "${ice_location}" STREQUAL "/"))
-          string(REGEX REPLACE "^\"(.*)\"?$" "\\1" ice_location "${ice_location}")
-          get_filename_component(ice_location "${ice_location}" ABSOLUTE)
-        else()
-          unset(ice_location)
-        endif()
-      endif()
-      # Ice 3.4+ releases don't use a suffix
-      if(NOT ice_location OR "${ice_location}" STREQUAL "/registry")
-        get_filename_component(ice_location
-                               "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ZeroC\\Ice ${ice_version};InstallDir]"
-                               ABSOLUTE)
-      endif()
-
-      if(ice_location AND NOT "${ice_location}" STREQUAL "/registry")
-        list(APPEND ice_roots "${ice_location}")
-      endif()
-    endforeach()
-  else()
-    foreach(ice_version ${ice_versions})
-      # Prefer 64-bit variants if present (and using a 64-bit compiler)
-      list(APPEND ice_roots "/opt/Ice-${ice_version}")
-    endforeach()
-  endif()
-
-  set(ice_programs
-      slice2cpp
-      slice2cs
-      slice2freezej
-      slice2freeze
-      slice2html
-      slice2java
-      slice2php
-      slice2py
-      slice2rb)
-
-  # Find all Ice programs
-  foreach(program ${ice_programs})
-    string(TOUPPER "${program}" program_upcase)
-    set(cache_var "Ice_${program_upcase}_EXECUTABLE")
-    set(program_var "Ice_${program_upcase}_EXECUTABLE")
-    find_program("${cache_var}" "${program}"
-      HINTS ${ice_roots}
-      PATH_SUFFIXES ${ice_binary_suffixes}
-      DOC "Ice ${program} executable")
-    mark_as_advanced(cache_var)
-    set("${program_var}" "${${cache_var}}" PARENT_SCOPE)
-  endforeach()
-
-  # Get version.
-  if(Ice_SLICE2CPP_EXECUTABLE)
-    # Execute in C locale for safety
-    set(_Ice_SAVED_LC_ALL "$ENV{LC_ALL}")
-    set(ENV{LC_ALL} C)
-
-    execute_process(COMMAND ${Ice_SLICE2CPP_EXECUTABLE} --version
-      ERROR_VARIABLE Ice_VERSION_SLICE2CPP_FULL
-      ERROR_STRIP_TRAILING_WHITESPACE)
-
-    # restore the previous LC_ALL
-    set(ENV{LC_ALL} ${_Ice_SAVED_LC_ALL})
-
-    # Make short version
-    string(REGEX REPLACE "^(.*)\\.[^.]*$" "\\1" Ice_VERSION_SLICE2CPP_SHORT "${Ice_VERSION_SLICE2CPP_FULL}")
-    set(Ice_VERSION "${Ice_VERSION_SLICE2CPP_FULL}" PARENT_SCOPE)
-  endif()
-
-  if(NOT Ice_FIND_QUIETLY)
-    message(STATUS "Ice version: ${Ice_VERSION_SLICE2CPP_FULL}")
-  endif()
-
-  # Find include directory
-  find_path(Ice_INCLUDE_DIR
-            NAMES "Ice/Ice.h"
-            HINTS ${ice_roots}
-            PATH_SUFFIXES ${ice_include_suffixes}
-            DOC "Ice include directory")
-  set(Ice_INCLUDE_DIR "${Ice_INCLUDE_DIR}" PARENT_SCOPE)
-
-  # In common use on Linux, MacOS X (homebrew) and FreeBSD; prefer
-  # version-specific dir
-  list(APPEND ice_slice_paths
-       /usr/local/share /usr/share)
-  list(APPEND ice_slice_suffixes
-       "Ice-${Ice_VERSION_SLICE2CPP_FULL}/slice"
-       "Ice-${Ice_VERSION_SLICE2CPP_SHORT}/slice"
-       Ice)
-
-  # Find slice directory
-  find_path(Ice_SLICE_DIR
-            NAMES "Ice/Connection.ice"
-            HINTS ${ice_roots}
-                  ${ice_slice_paths}
-            PATH_SUFFIXES ${ice_slice_suffixes}
-            NO_DEFAULT_PATH
-            DOC "Ice slice directory")
-  set(Ice_SLICE_DIR "${Ice_SLICE_DIR}" PARENT_SCOPE)
-
-  # Find all Ice libraries
-  set(Ice_REQUIRED_LIBS_FOUND ON)
-  foreach(component ${Ice_FIND_COMPONENTS})
-    string(TOUPPER "${component}" component_upcase)
-    set(component_cache "Ice_${component_upcase}_LIBRARY")
-    set(component_found "${component_upcase}_FOUND")
-    find_library("${component_cache}" "${component}"
-      HINTS ${ice_roots}
-      PATH_SUFFIXES ${ice_library_suffixes}
-      DOC "Ice ${component} library")
-    mark_as_advanced("${component_cache}")
-    if(${component_cache})
-      set("${component_found}" ON)
-      list(APPEND Ice_LIBRARY "${${component_cache}}")
-    endif()
-    mark_as_advanced("${component_found}")
-    set("${component_cache}" "${${component_cache}}" PARENT_SCOPE)
-    set("${component_found}" "${${component_found}}" PARENT_SCOPE)
-    if(${component_found})
-      if (Ice_FIND_REQUIRED_${component})
-        list(APPEND Ice_LIBS_FOUND "${component} (required)")
-      else()
-        list(APPEND Ice_LIBS_FOUND "${component} (optional)")
-      endif()
-    else()
-      if (Ice_FIND_REQUIRED_${component})
-        set(Ice_REQUIRED_LIBS_FOUND OFF)
-        list(APPEND Ice_LIBS_NOTFOUND "${component} (required)")
-      else()
-        list(APPEND Ice_LIBS_NOTFOUND "${component} (optional)")
-      endif()
-    endif()
-  endforeach()
-  set(_Ice_REQUIRED_LIBS_FOUND "${Ice_REQUIRED_LIBS_FOUND}" PARENT_SCOPE)
-  set(Ice_LIBRARY "${Ice_LIBRARY}" PARENT_SCOPE)
-
-  if(NOT Ice_FIND_QUIETLY)
-    if(Ice_LIBS_FOUND)
-      message(STATUS "Found the following Ice libraries:")
-      foreach(found ${Ice_LIBS_FOUND})
-        message(STATUS "  ${found}")
-      endforeach()
-    endif()
-    if(Ice_LIBS_NOTFOUND)
-      message(STATUS "The following Ice libraries were not found:")
-      foreach(notfound ${Ice_LIBS_NOTFOUND})
-        message(STATUS "  ${notfound}")
-      endforeach()
-    endif()
-  endif()
-
-  if(Ice_DEBUG)
-    message(STATUS "--------FindIce.cmake search debug--------")
-    message(STATUS "ICE binary path search order: ${ice_roots}")
-    message(STATUS "ICE include path search order: ${ice_roots}")
-    message(STATUS "ICE slice path search order: ${ice_roots} ${ice_slice_paths}")
-    message(STATUS "ICE library path search order: ${ice_roots}")
-    message(STATUS "----------------")
-  endif()
-endfunction()
-
-_Ice_FIND()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Ice
-                                  FOUND_VAR Ice_FOUND
-                                  REQUIRED_VARS Ice_SLICE2CPP_EXECUTABLE
-                                                Ice_INCLUDE_DIR
-                                                Ice_SLICE_DIR
-                                                Ice_LIBRARY
-                                                _Ice_REQUIRED_LIBS_FOUND
-                                  VERSION_VAR Ice_VERSION
-                                  FAIL_MESSAGE "Failed to find all Ice components")
-
-unset(_Ice_REQUIRED_LIBS_FOUND)
-
-if(Ice_FOUND)
-  set(Ice_INCLUDE_DIRS "${Ice_INCLUDE_DIR}")
-  set(Ice_SLICE_DIRS "${Ice_SLICE_DIR}")
-  set(Ice_LIBRARIES "${Ice_LIBRARY}")
-  foreach(_Ice_component ${Ice_FIND_COMPONENTS})
-    string(TOUPPER "${_Ice_component}" _Ice_component_upcase)
-    set(_Ice_component_cache "Ice_${_Ice_component_upcase}_LIBRARY")
-    set(_Ice_component_lib "Ice_${_Ice_component_upcase}_LIBRARIES")
-    set(_Ice_component_found "${_Ice_component_upcase}_FOUND")
-    if(${_Ice_component_found})
-      set("${_Ice_component_lib}" "${${_Ice_component_cache}}")
-    endif()
-    unset(_Ice_component_upcase)
-    unset(_Ice_component_cache)
-    unset(_Ice_component_lib)
-    unset(_Ice_component_found)
-  endforeach()
-endif()
-
-if(Ice_DEBUG)
-  message(STATUS "--------FindIce.cmake results debug--------")
-  message(STATUS "Ice_VERSION number: ${Ice_VERSION}")
-  message(STATUS "Ice_HOME directory: ${Ice_HOME}")
-  message(STATUS "Ice_INCLUDE_DIR directory: ${Ice_INCLUDE_DIR}")
-  message(STATUS "Ice_SLICE_DIR directory: ${Ice_SLICE_DIR}")
-  message(STATUS "Ice_LIBRARIES: ${Ice_LIBRARIES}")
-  message(STATUS "slice2cpp executable: ${Ice_SLICE2CPP_EXECUTABLE}")
-  message(STATUS "slice2cs executable: ${Ice_SLICE2CS_EXECUTABLE}")
-  message(STATUS "slice2freezej executable: ${Ice_SLICE2FREEZEJ_EXECUTABLE}")
-  message(STATUS "slice2freeze executable: ${Ice_SLICE2FREEZE_EXECUTABLE}")
-  message(STATUS "slice2html executable: ${Ice_SLICE2HTML_EXECUTABLE}")
-  message(STATUS "slice2java executable: ${Ice_SLICE2JAVA_EXECUTABLE}")
-  message(STATUS "slice2php executable: ${Ice_SLICE2PHP_EXECUTABLE}")
-  message(STATUS "slice2py executable: ${Ice_SLICE2PY_EXECUTABLE}")
-  message(STATUS "slice2rb executable: ${Ice_SLICE2RB_EXECUTABLE}")
-  foreach(component ${Ice_FIND_COMPONENTS})
-    string(TOUPPER "${component}" component_upcase)
-    set(component_lib "Ice_${component_upcase}_LIBRARIES")
-    set(component_found "${component_upcase}_FOUND")
-    message(STATUS "${component} library found: ${${component_found}}")
-    message(STATUS "${component} library: ${${component_lib}}")
-  endforeach()
-  message(STATUS "----------------")
-endif()
diff --git a/share/cmake-3.2/Modules/FindJNI.cmake b/share/cmake-3.2/Modules/FindJNI.cmake
deleted file mode 100644
index d248fe1..0000000
--- a/share/cmake-3.2/Modules/FindJNI.cmake
+++ /dev/null
@@ -1,308 +0,0 @@
-#.rst:
-# FindJNI
-# -------
-#
-# Find JNI java libraries.
-#
-# This module finds if Java is installed and determines where the
-# include files and libraries are.  It also determines what the name of
-# the library is.  The caller may set variable JAVA_HOME to specify a
-# Java installation prefix explicitly.
-#
-# This module sets the following result variables:
-#
-# ::
-#
-#   JNI_INCLUDE_DIRS      = the include dirs to use
-#   JNI_LIBRARIES         = the libraries to use
-#   JNI_FOUND             = TRUE if JNI headers and libraries were found.
-#   JAVA_AWT_LIBRARY      = the path to the jawt library
-#   JAVA_JVM_LIBRARY      = the path to the jvm library
-#   JAVA_INCLUDE_PATH     = the include path to jni.h
-#   JAVA_INCLUDE_PATH2    = the include path to jni_md.h
-#   JAVA_AWT_INCLUDE_PATH = the include path to jawt.h
-
-#=============================================================================
-# Copyright 2001-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Expand {libarch} occurences to java_libarch subdirectory(-ies) and set ${_var}
-macro(java_append_library_directories _var)
-    # Determine java arch-specific library subdir
-    # Mostly based on openjdk/jdk/make/common/shared/Platform.gmk as of openjdk
-    # 1.6.0_18 + icedtea patches. However, it would be much better to base the
-    # guess on the first part of the GNU config.guess platform triplet.
-    if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
-        set(_java_libarch "amd64" "i386")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^i.86$")
-        set(_java_libarch "i386")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^alpha")
-        set(_java_libarch "alpha")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm")
-        # Subdir is "arm" for both big-endian (arm) and little-endian (armel).
-        set(_java_libarch "arm")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips")
-        # mips* machines are bi-endian mostly so processor does not tell
-        # endianess of the underlying system.
-        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64le")
-        set(_java_libarch "ppc64" "ppc64le")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64")
-        set(_java_libarch "ppc64" "ppc")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)")
-        set(_java_libarch "ppc")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^sparc")
-        # Both flavours can run on the same processor
-        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(parisc|hppa)")
-        set(_java_libarch "parisc" "parisc64")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^s390")
-        # s390 binaries can run on s390x machines
-        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x")
-    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh")
-        set(_java_libarch "sh")
-    else()
-        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}")
-    endif()
-
-    # Append default list architectures if CMAKE_SYSTEM_PROCESSOR was empty or
-    # system is non-Linux (where the code above has not been well tested)
-    if(NOT _java_libarch OR NOT (CMAKE_SYSTEM_NAME MATCHES "Linux"))
-        list(APPEND _java_libarch "i386" "amd64" "ppc")
-    endif()
-
-    # Sometimes ${CMAKE_SYSTEM_PROCESSOR} is added to the list to prefer
-    # current value to a hardcoded list. Remove possible duplicates.
-    list(REMOVE_DUPLICATES _java_libarch)
-
-    foreach(_path ${ARGN})
-        if(_path MATCHES "{libarch}")
-            foreach(_libarch ${_java_libarch})
-                string(REPLACE "{libarch}" "${_libarch}" _newpath "${_path}")
-                list(APPEND ${_var} "${_newpath}")
-            endforeach()
-        else()
-            list(APPEND ${_var} "${_path}")
-        endif()
-    endforeach()
-endmacro()
-
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindJavaCommon.cmake)
-
-# Save CMAKE_FIND_FRAMEWORK
-if(DEFINED CMAKE_FIND_FRAMEWORK)
-  set(_JNI_CMAKE_FIND_FRAMEWORK ${CMAKE_FIND_FRAMEWORK})
-else()
-  unset(_JNI_CMAKE_FIND_FRAMEWORK)
-endif()
-
-if(_JAVA_HOME_EXPLICIT)
-  set(CMAKE_FIND_FRAMEWORK NEVER)
-endif()
-
-set(JAVA_AWT_LIBRARY_DIRECTORIES)
-if(_JAVA_HOME)
-  JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_LIBRARY_DIRECTORIES
-    ${_JAVA_HOME}/jre/lib/{libarch}
-    ${_JAVA_HOME}/jre/lib
-    ${_JAVA_HOME}/lib/{libarch}
-    ${_JAVA_HOME}/lib
-    ${_JAVA_HOME}
-    )
-endif()
-get_filename_component(java_install_version
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit;CurrentVersion]" NAME)
-
-list(APPEND JAVA_AWT_LIBRARY_DIRECTORIES
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/lib"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/lib"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\${java_install_version};JavaHome]/lib"
-  )
-JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_LIBRARY_DIRECTORIES
-  /usr/lib
-  /usr/local/lib
-  /usr/lib/jvm/java/lib
-  /usr/lib/java/jre/lib/{libarch}
-  /usr/lib/jvm/jre/lib/{libarch}
-  /usr/local/lib/java/jre/lib/{libarch}
-  /usr/local/share/java/jre/lib/{libarch}
-  /usr/lib/j2sdk1.4-sun/jre/lib/{libarch}
-  /usr/lib/j2sdk1.5-sun/jre/lib/{libarch}
-  /opt/sun-jdk-1.5.0.04/jre/lib/{libarch}
-  /usr/lib/jvm/java-6-sun/jre/lib/{libarch}
-  /usr/lib/jvm/java-1.5.0-sun/jre/lib/{libarch}
-  /usr/lib/jvm/java-6-sun-1.6.0.00/jre/lib/{libarch}       # can this one be removed according to #8821 ? Alex
-  /usr/lib/jvm/java-6-openjdk/jre/lib/{libarch}
-  /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/jre/lib/{libarch}        # fedora
-  # Debian specific paths for default JVM
-  /usr/lib/jvm/default-java/jre/lib/{libarch}
-  /usr/lib/jvm/default-java/jre/lib
-  /usr/lib/jvm/default-java/lib
-  # OpenBSD specific paths for default JVM
-  /usr/local/jdk-1.7.0/jre/lib/{libarch}
-  /usr/local/jre-1.7.0/lib/{libarch}
-  /usr/local/jdk-1.6.0/jre/lib/{libarch}
-  /usr/local/jre-1.6.0/lib/{libarch}
-  )
-
-set(JAVA_JVM_LIBRARY_DIRECTORIES)
-foreach(dir ${JAVA_AWT_LIBRARY_DIRECTORIES})
-  list(APPEND JAVA_JVM_LIBRARY_DIRECTORIES
-    "${dir}"
-    "${dir}/client"
-    "${dir}/server"
-    )
-endforeach()
-
-set(JAVA_AWT_INCLUDE_DIRECTORIES)
-if(_JAVA_HOME)
-  list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES ${_JAVA_HOME}/include)
-endif()
-list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/include"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/include"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\${java_install_version};JavaHome]/include"
-  /usr/include
-  /usr/local/include
-  /usr/lib/java/include
-  /usr/local/lib/java/include
-  /usr/lib/jvm/java/include
-  /usr/lib/jvm/java-6-sun/include
-  /usr/lib/jvm/java-1.5.0-sun/include
-  /usr/lib/jvm/java-6-sun-1.6.0.00/include       # can this one be removed according to #8821 ? Alex
-  /usr/lib/jvm/java-6-openjdk/include
-  /usr/local/share/java/include
-  /usr/lib/j2sdk1.4-sun/include
-  /usr/lib/j2sdk1.5-sun/include
-  /opt/sun-jdk-1.5.0.04/include
-  # Debian specific path for default JVM
-  /usr/lib/jvm/default-java/include
-  # OpenBSD specific path for default JVM
-  /usr/local/jdk-1.7.0/include
-  /usr/local/jdk-1.6.0/include
-  )
-
-foreach(JAVA_PROG "${JAVA_RUNTIME}" "${JAVA_COMPILE}" "${JAVA_ARCHIVE}")
-  get_filename_component(jpath "${JAVA_PROG}" PATH)
-  foreach(JAVA_INC_PATH ../include ../java/include ../share/java/include)
-    if(EXISTS ${jpath}/${JAVA_INC_PATH})
-      list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES "${jpath}/${JAVA_INC_PATH}")
-    endif()
-  endforeach()
-  foreach(JAVA_LIB_PATH
-    ../lib ../jre/lib ../jre/lib/i386
-    ../java/lib ../java/jre/lib ../java/jre/lib/i386
-    ../share/java/lib ../share/java/jre/lib ../share/java/jre/lib/i386)
-    if(EXISTS ${jpath}/${JAVA_LIB_PATH})
-      list(APPEND JAVA_AWT_LIBRARY_DIRECTORIES "${jpath}/${JAVA_LIB_PATH}")
-    endif()
-  endforeach()
-endforeach()
-
-if(APPLE)
-  if(CMAKE_FIND_FRAMEWORK STREQUAL "ONLY")
-    set(_JNI_SEARCHES FRAMEWORK)
-  elseif(CMAKE_FIND_FRAMEWORK STREQUAL "NEVER")
-    set(_JNI_SEARCHES NORMAL)
-  elseif(CMAKE_FIND_FRAMEWORK STREQUAL "LAST")
-    set(_JNI_SEARCHES NORMAL FRAMEWORK)
-  else()
-    set(_JNI_SEARCHES FRAMEWORK NORMAL)
-  endif()
-  set(_JNI_FRAMEWORK_JVM NAMES JavaVM)
-  set(_JNI_FRAMEWORK_JAWT "${_JNI_FRAMEWORK_JVM}")
-else()
-  set(_JNI_SEARCHES NORMAL)
-endif()
-
-set(_JNI_NORMAL_JVM
-  NAMES jvm
-  PATHS ${JAVA_JVM_LIBRARY_DIRECTORIES}
-  )
-
-set(_JNI_NORMAL_JAWT
-  NAMES jawt
-  PATHS ${JAVA_AWT_LIBRARY_DIRECTORIES}
-  )
-
-foreach(search ${_JNI_SEARCHES})
-  find_library(JAVA_JVM_LIBRARY ${_JNI_${search}_JVM})
-  find_library(JAVA_AWT_LIBRARY ${_JNI_${search}_JAWT})
-  if(JAVA_JVM_LIBRARY)
-    break()
-  endif()
-endforeach()
-unset(_JNI_SEARCHES)
-unset(_JNI_FRAMEWORK_JVM)
-unset(_JNI_FRAMEWORK_JAWT)
-unset(_JNI_NORMAL_JVM)
-unset(_JNI_NORMAL_JAWT)
-
-# Find headers matching the library.
-if("${JAVA_JVM_LIBRARY};${JAVA_AWT_LIBRARY};" MATCHES "(/JavaVM.framework|-framework JavaVM);")
-  set(CMAKE_FIND_FRAMEWORK ONLY)
-else()
-  set(CMAKE_FIND_FRAMEWORK NEVER)
-endif()
-
-# add in the include path
-find_path(JAVA_INCLUDE_PATH jni.h
-  ${JAVA_AWT_INCLUDE_DIRECTORIES}
-)
-
-find_path(JAVA_INCLUDE_PATH2 jni_md.h
-  ${JAVA_INCLUDE_PATH}
-  ${JAVA_INCLUDE_PATH}/darwin
-  ${JAVA_INCLUDE_PATH}/win32
-  ${JAVA_INCLUDE_PATH}/linux
-  ${JAVA_INCLUDE_PATH}/freebsd
-  ${JAVA_INCLUDE_PATH}/openbsd
-  ${JAVA_INCLUDE_PATH}/solaris
-  ${JAVA_INCLUDE_PATH}/hp-ux
-  ${JAVA_INCLUDE_PATH}/alpha
-)
-
-find_path(JAVA_AWT_INCLUDE_PATH jawt.h
-  ${JAVA_INCLUDE_PATH}
-)
-
-# Restore CMAKE_FIND_FRAMEWORK
-if(DEFINED _JNI_CMAKE_FIND_FRAMEWORK)
-  set(CMAKE_FIND_FRAMEWORK ${_JNI_CMAKE_FIND_FRAMEWORK})
-  unset(_JNI_CMAKE_FIND_FRAMEWORK)
-else()
-  unset(CMAKE_FIND_FRAMEWORK)
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(JNI  DEFAULT_MSG  JAVA_AWT_LIBRARY JAVA_JVM_LIBRARY
-                                                    JAVA_INCLUDE_PATH  JAVA_INCLUDE_PATH2 JAVA_AWT_INCLUDE_PATH)
-
-mark_as_advanced(
-  JAVA_AWT_LIBRARY
-  JAVA_JVM_LIBRARY
-  JAVA_AWT_INCLUDE_PATH
-  JAVA_INCLUDE_PATH
-  JAVA_INCLUDE_PATH2
-)
-
-set(JNI_LIBRARIES
-  ${JAVA_AWT_LIBRARY}
-  ${JAVA_JVM_LIBRARY}
-)
-
-set(JNI_INCLUDE_DIRS
-  ${JAVA_INCLUDE_PATH}
-  ${JAVA_INCLUDE_PATH2}
-  ${JAVA_AWT_INCLUDE_PATH}
-)
-
diff --git a/share/cmake-3.2/Modules/FindJava.cmake b/share/cmake-3.2/Modules/FindJava.cmake
deleted file mode 100644
index bb73853..0000000
--- a/share/cmake-3.2/Modules/FindJava.cmake
+++ /dev/null
@@ -1,229 +0,0 @@
-#.rst:
-# FindJava
-# --------
-#
-# Find Java
-#
-# This module finds if Java is installed and determines where the
-# include files and libraries are.  The caller may set variable JAVA_HOME
-# to specify a Java installation prefix explicitly.
-#
-# This module sets the following result variables:
-#
-# ::
-#
-#   Java_JAVA_EXECUTABLE    = the full path to the Java runtime
-#   Java_JAVAC_EXECUTABLE   = the full path to the Java compiler
-#   Java_JAVAH_EXECUTABLE   = the full path to the Java header generator
-#   Java_JAVADOC_EXECUTABLE = the full path to the Java documention generator
-#   Java_JAR_EXECUTABLE     = the full path to the Java archiver
-#   Java_VERSION_STRING     = Version of java found, eg. 1.6.0_12
-#   Java_VERSION_MAJOR      = The major version of the package found.
-#   Java_VERSION_MINOR      = The minor version of the package found.
-#   Java_VERSION_PATCH      = The patch version of the package found.
-#   Java_VERSION_TWEAK      = The tweak version of the package found (after '_')
-#   Java_VERSION            = This is set to: $major.$minor.$patch(.$tweak)
-#
-#
-#
-# The minimum required version of Java can be specified using the
-# standard CMake syntax, e.g.  find_package(Java 1.5)
-#
-# NOTE: ${Java_VERSION} and ${Java_VERSION_STRING} are not guaranteed to
-# be identical.  For example some java version may return:
-# Java_VERSION_STRING = 1.5.0_17 and Java_VERSION = 1.5.0.17
-#
-# another example is the Java OEM, with: Java_VERSION_STRING = 1.6.0-oem
-# and Java_VERSION = 1.6.0
-#
-# For these components the following variables are set:
-#
-# ::
-#
-#   Java_FOUND                    - TRUE if all components are found.
-#   Java_INCLUDE_DIRS             - Full paths to all include dirs.
-#   Java_LIBRARIES                - Full paths to all libraries.
-#   Java_<component>_FOUND        - TRUE if <component> is found.
-#
-#
-#
-# Example Usages:
-#
-# ::
-#
-#   find_package(Java)
-#   find_package(Java COMPONENTS Runtime)
-#   find_package(Java COMPONENTS Development)
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-# Copyright 2009-2011 Mathieu Malaterre <mathieu.malaterre@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindJavaCommon.cmake)
-
-# The HINTS option should only be used for values computed from the system.
-set(_JAVA_HINTS)
-if(_JAVA_HOME)
-  list(APPEND _JAVA_HINTS ${_JAVA_HOME}/bin)
-endif()
-list(APPEND _JAVA_HINTS
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\2.0;JavaHome]/bin"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.9;JavaHome]/bin"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.8;JavaHome]/bin"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.7;JavaHome]/bin"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.6;JavaHome]/bin"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.5;JavaHome]/bin"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/bin"
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/bin"
-  )
-# Hard-coded guesses should still go in PATHS. This ensures that the user
-# environment can always override hard guesses.
-set(_JAVA_PATHS
-  /usr/lib/java/bin
-  /usr/share/java/bin
-  /usr/local/java/bin
-  /usr/local/java/share/bin
-  /usr/java/j2sdk1.4.2_04
-  /usr/lib/j2sdk1.4-sun/bin
-  /usr/java/j2sdk1.4.2_09/bin
-  /usr/lib/j2sdk1.5-sun/bin
-  /opt/sun-jdk-1.5.0.04/bin
-  /usr/local/jdk-1.7.0/bin
-  /usr/local/jdk-1.6.0/bin
-  )
-find_program(Java_JAVA_EXECUTABLE
-  NAMES java
-  HINTS ${_JAVA_HINTS}
-  PATHS ${_JAVA_PATHS}
-)
-
-if(Java_JAVA_EXECUTABLE)
-    execute_process(COMMAND ${Java_JAVA_EXECUTABLE} -version
-      RESULT_VARIABLE res
-      OUTPUT_VARIABLE var
-      ERROR_VARIABLE var # sun-java output to stderr
-      OUTPUT_STRIP_TRAILING_WHITESPACE
-      ERROR_STRIP_TRAILING_WHITESPACE)
-    if( res )
-      if(var MATCHES "No Java runtime present, requesting install")
-        set_property(CACHE Java_JAVA_EXECUTABLE
-          PROPERTY VALUE "Java_JAVA_EXECUTABLE-NOTFOUND")
-      elseif(${Java_FIND_REQUIRED})
-        message( FATAL_ERROR "Error executing java -version" )
-      else()
-        message( STATUS "Warning, could not run java -version")
-      endif()
-    else()
-      # extract major/minor version and patch level from "java -version" output
-      # Tested on linux using
-      # 1. Sun / Sun OEM
-      # 2. OpenJDK 1.6
-      # 3. GCJ 1.5
-      # 4. Kaffe 1.4.2
-      # 5. OpenJDK 1.7.x on OpenBSD
-      if(var MATCHES "java version \"([0-9]+\\.[0-9]+\\.[0-9_.]+.*)\"")
-        # This is most likely Sun / OpenJDK, or maybe GCJ-java compat layer
-        set(Java_VERSION_STRING "${CMAKE_MATCH_1}")
-      elseif(var MATCHES "java full version \"kaffe-([0-9]+\\.[0-9]+\\.[0-9_]+)\"")
-        # Kaffe style
-        set(Java_VERSION_STRING "${CMAKE_MATCH_1}")
-      elseif(var MATCHES "openjdk version \"([0-9]+\\.[0-9]+\\.[0-9_]+)\"")
-        # OpenJDK ver 1.7.x on OpenBSD
-        set(Java_VERSION_STRING "${CMAKE_MATCH_1}")
-      else()
-        if(NOT Java_FIND_QUIETLY)
-          message(WARNING "regex not supported: ${var}. Please report")
-        endif()
-      endif()
-      string( REGEX REPLACE "([0-9]+).*" "\\1" Java_VERSION_MAJOR "${Java_VERSION_STRING}" )
-      string( REGEX REPLACE "[0-9]+\\.([0-9]+).*" "\\1" Java_VERSION_MINOR "${Java_VERSION_STRING}" )
-      string( REGEX REPLACE "[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" Java_VERSION_PATCH "${Java_VERSION_STRING}" )
-      # warning tweak version can be empty:
-      string( REGEX REPLACE "[0-9]+\\.[0-9]+\\.[0-9]+[_\\.]?([0-9]*).*$" "\\1" Java_VERSION_TWEAK "${Java_VERSION_STRING}" )
-      if( Java_VERSION_TWEAK STREQUAL "" ) # check case where tweak is not defined
-        set(Java_VERSION ${Java_VERSION_MAJOR}.${Java_VERSION_MINOR}.${Java_VERSION_PATCH})
-      else()
-        set(Java_VERSION ${Java_VERSION_MAJOR}.${Java_VERSION_MINOR}.${Java_VERSION_PATCH}.${Java_VERSION_TWEAK})
-      endif()
-    endif()
-
-endif()
-
-
-find_program(Java_JAR_EXECUTABLE
-  NAMES jar
-  HINTS ${_JAVA_HINTS}
-  PATHS ${_JAVA_PATHS}
-)
-
-find_program(Java_JAVAC_EXECUTABLE
-  NAMES javac
-  HINTS ${_JAVA_HINTS}
-  PATHS ${_JAVA_PATHS}
-)
-
-find_program(Java_JAVAH_EXECUTABLE
-  NAMES javah
-  HINTS ${_JAVA_HINTS}
-  PATHS ${_JAVA_PATHS}
-)
-
-find_program(Java_JAVADOC_EXECUTABLE
-  NAMES javadoc
-  HINTS ${_JAVA_HINTS}
-  PATHS ${_JAVA_PATHS}
-)
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-if(Java_FIND_COMPONENTS)
-  foreach(component ${Java_FIND_COMPONENTS})
-    # User just want to execute some Java byte-compiled
-    if(component STREQUAL "Runtime")
-      find_package_handle_standard_args(Java
-        REQUIRED_VARS Java_JAVA_EXECUTABLE
-        VERSION_VAR Java_VERSION
-        )
-    elseif(component STREQUAL "Development")
-      find_package_handle_standard_args(Java
-        REQUIRED_VARS Java_JAVA_EXECUTABLE Java_JAR_EXECUTABLE Java_JAVAC_EXECUTABLE
-                      Java_JAVAH_EXECUTABLE Java_JAVADOC_EXECUTABLE
-        VERSION_VAR Java_VERSION
-        )
-    else()
-      message(FATAL_ERROR "Comp: ${component} is not handled")
-    endif()
-    set(Java_${component}_FOUND TRUE)
-  endforeach()
-else()
-  # Check for everything
-  find_package_handle_standard_args(Java
-    REQUIRED_VARS Java_JAVA_EXECUTABLE Java_JAR_EXECUTABLE Java_JAVAC_EXECUTABLE
-                  Java_JAVAH_EXECUTABLE Java_JAVADOC_EXECUTABLE
-    VERSION_VAR Java_VERSION
-    )
-endif()
-
-
-mark_as_advanced(
-  Java_JAVA_EXECUTABLE
-  Java_JAR_EXECUTABLE
-  Java_JAVAC_EXECUTABLE
-  Java_JAVAH_EXECUTABLE
-  Java_JAVADOC_EXECUTABLE
-  )
-
-# LEGACY
-set(JAVA_RUNTIME ${Java_JAVA_EXECUTABLE})
-set(JAVA_ARCHIVE ${Java_JAR_EXECUTABLE})
-set(JAVA_COMPILE ${Java_JAVAC_EXECUTABLE})
-
diff --git a/share/cmake-3.2/Modules/FindKDE4.cmake b/share/cmake-3.2/Modules/FindKDE4.cmake
deleted file mode 100644
index 3c2c309..0000000
--- a/share/cmake-3.2/Modules/FindKDE4.cmake
+++ /dev/null
@@ -1,113 +0,0 @@
-#.rst:
-# FindKDE4
-# --------
-#
-#
-#
-# Find KDE4 and provide all necessary variables and macros to compile
-# software for it.  It looks for KDE 4 in the following directories in
-# the given order:
-#
-# ::
-#
-#   CMAKE_INSTALL_PREFIX
-#   KDEDIRS
-#   /opt/kde4
-#
-#
-#
-# Please look in FindKDE4Internal.cmake and KDE4Macros.cmake for more
-# information.  They are installed with the KDE 4 libraries in
-# $KDEDIRS/share/apps/cmake/modules/.
-#
-# Author: Alexander Neundorf <neundorf@kde.org>
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# If Qt3 has already been found, fail.
-if(QT_QT_LIBRARY)
-  if(KDE4_FIND_REQUIRED)
-    message( FATAL_ERROR "KDE4/Qt4 and Qt3 cannot be used together in one project.")
-  else()
-    if(NOT KDE4_FIND_QUIETLY)
-      message( STATUS    "KDE4/Qt4 and Qt3 cannot be used together in one project.")
-    endif()
-    return()
-  endif()
-endif()
-
-file(TO_CMAKE_PATH "$ENV{KDEDIRS}" _KDEDIRS)
-
-# when cross compiling, searching kde4-config in order to run it later on
-# doesn't make a lot of sense. We'll have to do something about this.
-# Searching always in the target environment ? Then we get at least the correct one,
-# still it can't be used to run it. Alex
-
-# For KDE4 kde-config has been renamed to kde4-config
-find_program(KDE4_KDECONFIG_EXECUTABLE NAMES kde4-config
-   # the suffix must be used since KDEDIRS can be a list of directories which don't have bin/ appended
-   PATH_SUFFIXES bin
-   HINTS
-   ${CMAKE_INSTALL_PREFIX}
-   ${_KDEDIRS}
-   /opt/kde4
-   ONLY_CMAKE_FIND_ROOT_PATH
-   )
-
-if (NOT KDE4_KDECONFIG_EXECUTABLE)
-   if (KDE4_FIND_REQUIRED)
-      message(FATAL_ERROR "ERROR: Could not find KDE4 kde4-config")
-   endif ()
-endif ()
-
-
-# when cross compiling, KDE4_DATA_DIR may be already preset
-if(NOT KDE4_DATA_DIR)
-   if(CMAKE_CROSSCOMPILING)
-      # when cross compiling, don't run kde4-config but use its location as install dir
-      get_filename_component(KDE4_DATA_DIR "${KDE4_KDECONFIG_EXECUTABLE}" PATH)
-      get_filename_component(KDE4_DATA_DIR "${KDE4_DATA_DIR}" PATH)
-   else()
-      # then ask kde4-config for the kde data dirs
-
-      if(KDE4_KDECONFIG_EXECUTABLE)
-        execute_process(COMMAND "${KDE4_KDECONFIG_EXECUTABLE}" --path data OUTPUT_VARIABLE _data_DIR ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
-        file(TO_CMAKE_PATH "${_data_DIR}" _data_DIR)
-        # then check the data dirs for FindKDE4Internal.cmake
-        find_path(KDE4_DATA_DIR cmake/modules/FindKDE4Internal.cmake HINTS ${_data_DIR})
-      endif()
-   endif()
-endif()
-
-# if it has been found...
-if (KDE4_DATA_DIR)
-
-   set(CMAKE_MODULE_PATH  ${CMAKE_MODULE_PATH} ${KDE4_DATA_DIR}/cmake/modules)
-
-   if (KDE4_FIND_QUIETLY)
-      set(_quiet QUIET)
-   endif ()
-
-   if (KDE4_FIND_REQUIRED)
-      set(_req REQUIRED)
-   endif ()
-
-   # use FindKDE4Internal.cmake to do the rest
-   find_package(KDE4Internal ${_req} ${_quiet})
-else ()
-   if (KDE4_FIND_REQUIRED)
-      message(FATAL_ERROR "ERROR: cmake/modules/FindKDE4Internal.cmake not found in ${_data_DIR}")
-   endif ()
-endif ()
diff --git a/share/cmake-3.2/Modules/FindLAPACK.cmake b/share/cmake-3.2/Modules/FindLAPACK.cmake
deleted file mode 100644
index b11edc3..0000000
--- a/share/cmake-3.2/Modules/FindLAPACK.cmake
+++ /dev/null
@@ -1,355 +0,0 @@
-#.rst:
-# FindLAPACK
-# ----------
-#
-# Find LAPACK library
-#
-# This module finds an installed fortran library that implements the
-# LAPACK linear-algebra interface (see http://www.netlib.org/lapack/).
-#
-# The approach follows that taken for the autoconf macro file,
-# acx_lapack.m4 (distributed at
-# http://ac-archive.sourceforge.net/ac-archive/acx_lapack.html).
-#
-# This module sets the following variables:
-#
-# ::
-#
-#   LAPACK_FOUND - set to true if a library implementing the LAPACK interface
-#     is found
-#   LAPACK_LINKER_FLAGS - uncached list of required linker flags (excluding -l
-#     and -L).
-#   LAPACK_LIBRARIES - uncached list of libraries (using full path name) to
-#     link against to use LAPACK
-#   LAPACK95_LIBRARIES - uncached list of libraries (using full path name) to
-#     link against to use LAPACK95
-#   LAPACK95_FOUND - set to true if a library implementing the LAPACK f95
-#     interface is found
-#   BLA_STATIC  if set on this determines what kind of linkage we do (static)
-#   BLA_VENDOR  if set checks only the specified vendor, if not set checks
-#      all the possibilities
-#   BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
-#
-# ## List of vendors (BLA_VENDOR) valid in this module # Intel(mkl),
-# ACML,Apple, NAS, Generic
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(_lapack_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-
-get_property(_LANGUAGES_ GLOBAL PROPERTY ENABLED_LANGUAGES)
-if (NOT _LANGUAGES_ MATCHES Fortran)
-include(${CMAKE_CURRENT_LIST_DIR}/CheckFunctionExists.cmake)
-else ()
-include(${CMAKE_CURRENT_LIST_DIR}/CheckFortranFunctionExists.cmake)
-endif ()
-include(${CMAKE_CURRENT_LIST_DIR}/CMakePushCheckState.cmake)
-
-cmake_push_check_state()
-set(CMAKE_REQUIRED_QUIET ${LAPACK_FIND_QUIETLY})
-
-set(LAPACK_FOUND FALSE)
-set(LAPACK95_FOUND FALSE)
-
-# TODO: move this stuff to separate module
-
-macro(Check_Lapack_Libraries LIBRARIES _prefix _name _flags _list _blas _threads)
-# This macro checks for the existence of the combination of fortran libraries
-# given by _list.  If the combination is found, this macro checks (using the
-# Check_Fortran_Function_Exists macro) whether can link against that library
-# combination using the name of a routine given by _name using the linker
-# flags given by _flags.  If the combination of libraries is found and passes
-# the link test, LIBRARIES is set to the list of complete library paths that
-# have been found.  Otherwise, LIBRARIES is set to FALSE.
-
-# N.B. _prefix is the prefix applied to the names of all cached variables that
-# are generated internally and marked advanced by this macro.
-
-set(_libraries_work TRUE)
-set(${LIBRARIES})
-set(_combined_name)
-if (NOT _libdir)
-  if (WIN32)
-    set(_libdir ENV LIB)
-  elseif (APPLE)
-    set(_libdir ENV DYLD_LIBRARY_PATH)
-  else ()
-    set(_libdir ENV LD_LIBRARY_PATH)
-  endif ()
-endif ()
-foreach(_library ${_list})
-  set(_combined_name ${_combined_name}_${_library})
-
-  if(_libraries_work)
-    if (BLA_STATIC)
-      if (WIN32)
-        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
-      endif ()
-      if (APPLE)
-        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
-      else ()
-        set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
-      endif ()
-    else ()
-			if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
-        # for ubuntu's libblas3gf and liblapack3gf packages
-        set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES} .so.3gf)
-      endif ()
-    endif ()
-    find_library(${_prefix}_${_library}_LIBRARY
-      NAMES ${_library}
-      PATHS ${_libdir}
-      )
-    mark_as_advanced(${_prefix}_${_library}_LIBRARY)
-    set(${LIBRARIES} ${${LIBRARIES}} ${${_prefix}_${_library}_LIBRARY})
-    set(_libraries_work ${${_prefix}_${_library}_LIBRARY})
-  endif()
-endforeach()
-
-if(_libraries_work)
-  # Test this combination of libraries.
-  if(UNIX AND BLA_STATIC)
-    set(CMAKE_REQUIRED_LIBRARIES ${_flags} "-Wl,--start-group" ${${LIBRARIES}} ${_blas} "-Wl,--end-group" ${_threads})
-  else()
-    set(CMAKE_REQUIRED_LIBRARIES ${_flags} ${${LIBRARIES}} ${_blas} ${_threads})
-  endif()
-#  message("DEBUG: CMAKE_REQUIRED_LIBRARIES = ${CMAKE_REQUIRED_LIBRARIES}")
-  if (NOT _LANGUAGES_ MATCHES Fortran)
-    check_function_exists("${_name}_" ${_prefix}${_combined_name}_WORKS)
-  else ()
-    check_fortran_function_exists(${_name} ${_prefix}${_combined_name}_WORKS)
-  endif ()
-  set(CMAKE_REQUIRED_LIBRARIES)
-  mark_as_advanced(${_prefix}${_combined_name}_WORKS)
-  set(_libraries_work ${${_prefix}${_combined_name}_WORKS})
-  #message("DEBUG: ${LIBRARIES} = ${${LIBRARIES}}")
-endif()
-
- if(_libraries_work)
-   set(${LIBRARIES} ${${LIBRARIES}} ${_blas} ${_threads})
- else()
-    set(${LIBRARIES} FALSE)
- endif()
-
-endmacro()
-
-
-set(LAPACK_LINKER_FLAGS)
-set(LAPACK_LIBRARIES)
-set(LAPACK95_LIBRARIES)
-
-
-if(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
-  find_package(BLAS)
-else()
-  find_package(BLAS REQUIRED)
-endif()
-
-
-if(BLAS_FOUND)
-  set(LAPACK_LINKER_FLAGS ${BLAS_LINKER_FLAGS})
-  if (NOT $ENV{BLA_VENDOR} STREQUAL "")
-    set(BLA_VENDOR $ENV{BLA_VENDOR})
-  else ()
-    if(NOT BLA_VENDOR)
-      set(BLA_VENDOR "All")
-    endif()
-  endif ()
-
-if (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
- if(NOT LAPACK_LIBRARIES)
-  check_lapack_libraries(
-  LAPACK_LIBRARIES
-  LAPACK
-  cheev
-  ""
-  "goto2"
-  "${BLAS_LIBRARIES}"
-  ""
-  )
- endif()
-endif ()
-
-
-#acml lapack
- if (BLA_VENDOR MATCHES "ACML" OR BLA_VENDOR STREQUAL "All")
-   if (BLAS_LIBRARIES MATCHES ".+acml.+")
-     set (LAPACK_LIBRARIES ${BLAS_LIBRARIES})
-   endif ()
- endif ()
-
-# Apple LAPACK library?
-if (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
- if(NOT LAPACK_LIBRARIES)
-  check_lapack_libraries(
-  LAPACK_LIBRARIES
-  LAPACK
-  cheev
-  ""
-  "Accelerate"
-  "${BLAS_LIBRARIES}"
-  ""
-  )
- endif()
-endif ()
-if (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
-  if ( NOT LAPACK_LIBRARIES )
-    check_lapack_libraries(
-    LAPACK_LIBRARIES
-    LAPACK
-    cheev
-    ""
-    "vecLib"
-    "${BLAS_LIBRARIES}"
-    ""
-    )
-  endif ()
-endif ()
-# Generic LAPACK library?
-if (BLA_VENDOR STREQUAL "Generic" OR
-    BLA_VENDOR STREQUAL "ATLAS" OR
-    BLA_VENDOR STREQUAL "All")
-  if ( NOT LAPACK_LIBRARIES )
-    check_lapack_libraries(
-    LAPACK_LIBRARIES
-    LAPACK
-    cheev
-    ""
-    "lapack"
-    "${BLAS_LIBRARIES}"
-    ""
-    )
-  endif ()
-endif ()
-#intel lapack
-if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All")
-  if (NOT WIN32)
-    set(LM "-lm")
-  endif ()
-  if (_LANGUAGES_ MATCHES C OR _LANGUAGES_ MATCHES CXX)
-    if(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
-      find_PACKAGE(Threads)
-    else()
-      find_package(Threads REQUIRED)
-    endif()
-
-    set(LAPACK_SEARCH_LIBS "")
-
-    if (BLA_F95)
-      set(LAPACK_mkl_SEARCH_SYMBOL "CHEEV")
-      set(_LIBRARIES LAPACK95_LIBRARIES)
-      set(_BLAS_LIBRARIES ${BLAS95_LIBRARIES})
-
-      # old
-      list(APPEND LAPACK_SEARCH_LIBS
-        "mkl_lapack95")
-      # new >= 10.3
-      list(APPEND LAPACK_SEARCH_LIBS
-        "mkl_intel_c")
-      list(APPEND LAPACK_SEARCH_LIBS
-        "mkl_intel_lp64")
-    else()
-      set(LAPACK_mkl_SEARCH_SYMBOL "cheev")
-      set(_LIBRARIES LAPACK_LIBRARIES)
-      set(_BLAS_LIBRARIES ${BLAS_LIBRARIES})
-
-      # old
-      list(APPEND LAPACK_SEARCH_LIBS
-        "mkl_lapack")
-      # new >= 10.3
-      list(APPEND LAPACK_SEARCH_LIBS
-        "mkl_gf_lp64")
-    endif()
-
-    # First try empty lapack libs
-    if (NOT ${_LIBRARIES})
-      check_lapack_libraries(
-        ${_LIBRARIES}
-        BLAS
-        ${LAPACK_mkl_SEARCH_SYMBOL}
-        ""
-        ""
-        "${_BLAS_LIBRARIES}"
-        "${CMAKE_THREAD_LIBS_INIT};${LM}"
-        )
-    endif ()
-    # Then try the search libs
-    foreach (IT ${LAPACK_SEARCH_LIBS})
-      if (NOT ${_LIBRARIES})
-        check_lapack_libraries(
-          ${_LIBRARIES}
-          BLAS
-          ${LAPACK_mkl_SEARCH_SYMBOL}
-          ""
-          "${IT}"
-          "${_BLAS_LIBRARIES}"
-          "${CMAKE_THREAD_LIBS_INIT};${LM}"
-          )
-      endif ()
-    endforeach ()
-  endif ()
-endif()
-else()
-  message(STATUS "LAPACK requires BLAS")
-endif()
-
-if(BLA_F95)
- if(LAPACK95_LIBRARIES)
-  set(LAPACK95_FOUND TRUE)
- else()
-  set(LAPACK95_FOUND FALSE)
- endif()
- if(NOT LAPACK_FIND_QUIETLY)
-  if(LAPACK95_FOUND)
-    message(STATUS "A library with LAPACK95 API found.")
-  else()
-    if(LAPACK_FIND_REQUIRED)
-      message(FATAL_ERROR
-      "A required library with LAPACK95 API not found. Please specify library location."
-      )
-    else()
-      message(STATUS
-      "A library with LAPACK95 API not found. Please specify library location."
-      )
-    endif()
-  endif()
- endif()
- set(LAPACK_FOUND "${LAPACK95_FOUND}")
- set(LAPACK_LIBRARIES "${LAPACK95_LIBRARIES}")
-else()
- if(LAPACK_LIBRARIES)
-  set(LAPACK_FOUND TRUE)
- else()
-  set(LAPACK_FOUND FALSE)
- endif()
-
- if(NOT LAPACK_FIND_QUIETLY)
-  if(LAPACK_FOUND)
-    message(STATUS "A library with LAPACK API found.")
-  else()
-    if(LAPACK_FIND_REQUIRED)
-      message(FATAL_ERROR
-      "A required library with LAPACK API not found. Please specify library location."
-      )
-    else()
-      message(STATUS
-      "A library with LAPACK API not found. Please specify library location."
-      )
-    endif()
-  endif()
- endif()
-endif()
-
-cmake_pop_check_state()
-set(CMAKE_FIND_LIBRARY_SUFFIXES ${_lapack_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
diff --git a/share/cmake-3.2/Modules/FindLibArchive.cmake b/share/cmake-3.2/Modules/FindLibArchive.cmake
deleted file mode 100644
index 471a4f1..0000000
--- a/share/cmake-3.2/Modules/FindLibArchive.cmake
+++ /dev/null
@@ -1,74 +0,0 @@
-#.rst:
-# FindLibArchive
-# --------------
-#
-# Find libarchive library and headers
-#
-# The module defines the following variables:
-#
-# ::
-#
-#   LibArchive_FOUND        - true if libarchive was found
-#   LibArchive_INCLUDE_DIRS - include search path
-#   LibArchive_LIBRARIES    - libraries to link
-#   LibArchive_VERSION      - libarchive 3-component version number
-
-#=============================================================================
-# Copyright 2010 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-find_path(LibArchive_INCLUDE_DIR
-  NAMES archive.h
-  PATHS
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\LibArchive;InstallPath]/include"
-  )
-
-find_library(LibArchive_LIBRARY
-  NAMES archive libarchive
-  PATHS
-  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\LibArchive;InstallPath]/lib"
-  )
-
-mark_as_advanced(LibArchive_INCLUDE_DIR LibArchive_LIBRARY)
-
-# Extract the version number from the header.
-if(LibArchive_INCLUDE_DIR AND EXISTS "${LibArchive_INCLUDE_DIR}/archive.h")
-  # The version string appears in one of two known formats in the header:
-  #  #define ARCHIVE_LIBRARY_VERSION "libarchive 2.4.12"
-  #  #define ARCHIVE_VERSION_STRING "libarchive 2.8.4"
-  # Match either format.
-  set(_LibArchive_VERSION_REGEX "^#define[ \t]+ARCHIVE[_A-Z]+VERSION[_A-Z]*[ \t]+\"libarchive +([0-9]+)\\.([0-9]+)\\.([0-9]+)[^\"]*\".*$")
-  file(STRINGS "${LibArchive_INCLUDE_DIR}/archive.h" _LibArchive_VERSION_STRING LIMIT_COUNT 1 REGEX "${_LibArchive_VERSION_REGEX}")
-  if(_LibArchive_VERSION_STRING)
-    string(REGEX REPLACE "${_LibArchive_VERSION_REGEX}" "\\1.\\2.\\3" LibArchive_VERSION "${_LibArchive_VERSION_STRING}")
-  endif()
-  unset(_LibArchive_VERSION_REGEX)
-  unset(_LibArchive_VERSION_STRING)
-endif()
-
-# Handle the QUIETLY and REQUIRED arguments and set LIBARCHIVE_FOUND
-# to TRUE if all listed variables are TRUE.
-# (Use ${CMAKE_ROOT}/Modules instead of ${CMAKE_CURRENT_LIST_DIR} because CMake
-#  itself includes this FindLibArchive when built with an older CMake that does
-#  not provide it.  The older CMake also does not have CMAKE_CURRENT_LIST_DIR.)
-include(${CMAKE_ROOT}/Modules/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(LibArchive
-                                  REQUIRED_VARS LibArchive_LIBRARY LibArchive_INCLUDE_DIR
-                                  VERSION_VAR LibArchive_VERSION
-  )
-set(LibArchive_FOUND ${LIBARCHIVE_FOUND})
-unset(LIBARCHIVE_FOUND)
-
-if(LibArchive_FOUND)
-  set(LibArchive_INCLUDE_DIRS ${LibArchive_INCLUDE_DIR})
-  set(LibArchive_LIBRARIES    ${LibArchive_LIBRARY})
-endif()
diff --git a/share/cmake-3.2/Modules/FindLua.cmake b/share/cmake-3.2/Modules/FindLua.cmake
deleted file mode 100644
index 731f5f2..0000000
--- a/share/cmake-3.2/Modules/FindLua.cmake
+++ /dev/null
@@ -1,171 +0,0 @@
-#.rst:
-# FindLua
-# -------
-#
-#
-#
-# Locate Lua library This module defines
-#
-# ::
-#
-#   LUA_FOUND          - if false, do not try to link to Lua
-#   LUA_LIBRARIES      - both lua and lualib
-#   LUA_INCLUDE_DIR    - where to find lua.h
-#   LUA_VERSION_STRING - the version of Lua found
-#   LUA_VERSION_MAJOR  - the major version of Lua
-#   LUA_VERSION_MINOR  - the minor version of Lua
-#   LUA_VERSION_PATCH  - the patch version of Lua
-#
-#
-#
-# Note that the expected include convention is
-#
-# ::
-#
-#   #include "lua.h"
-#
-# and not
-#
-# ::
-#
-#   #include <lua/lua.h>
-#
-# This is because, the lua location is not standardized and may exist in
-# locations other than lua/
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-# Copyright 2013 Rolf Eike Beer <eike@sf-mail.de>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-unset(_lua_include_subdirs)
-unset(_lua_library_names)
-
-# this is a function only to have all the variables inside go away automatically
-function(set_lua_version_vars)
-    set(LUA_VERSIONS5 5.3 5.2 5.1 5.0)
-
-    if (Lua_FIND_VERSION_EXACT)
-        if (Lua_FIND_VERSION_COUNT GREATER 1)
-            set(lua_append_versions ${Lua_FIND_VERSION_MAJOR}.${Lua_FIND_VERSION_MINOR})
-        endif ()
-    elseif (Lua_FIND_VERSION)
-        # once there is a different major version supported this should become a loop
-        if (NOT Lua_FIND_VERSION_MAJOR GREATER 5)
-            if (Lua_FIND_VERSION_COUNT EQUAL 1)
-                set(lua_append_versions ${LUA_VERSIONS5})
-            else ()
-                foreach (subver IN LISTS LUA_VERSIONS5)
-                    if (NOT subver VERSION_LESS ${Lua_FIND_VERSION})
-                        list(APPEND lua_append_versions ${subver})
-                    endif ()
-                endforeach ()
-            endif ()
-        endif ()
-    else ()
-        # once there is a different major version supported this should become a loop
-        set(lua_append_versions ${LUA_VERSIONS5})
-    endif ()
-
-    foreach (ver IN LISTS lua_append_versions)
-        string(REGEX MATCH "^([0-9]+)\\.([0-9]+)$" _ver "${ver}")
-        list(APPEND _lua_include_subdirs
-             include/lua${CMAKE_MATCH_1}${CMAKE_MATCH_2}
-             include/lua${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
-             include/lua-${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
-        )
-        list(APPEND _lua_library_names
-             lua${CMAKE_MATCH_1}${CMAKE_MATCH_2}
-             lua${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
-             lua-${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
-        )
-    endforeach ()
-
-    set(_lua_include_subdirs "${_lua_include_subdirs}" PARENT_SCOPE)
-    set(_lua_library_names "${_lua_library_names}" PARENT_SCOPE)
-endfunction(set_lua_version_vars)
-
-set_lua_version_vars()
-
-find_path(LUA_INCLUDE_DIR lua.h
-  HINTS
-    ENV LUA_DIR
-  PATH_SUFFIXES ${_lua_include_subdirs} include/lua include
-  PATHS
-  ~/Library/Frameworks
-  /Library/Frameworks
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-  /opt
-)
-unset(_lua_include_subdirs)
-
-find_library(LUA_LIBRARY
-  NAMES ${_lua_library_names} lua
-  HINTS
-    ENV LUA_DIR
-  PATH_SUFFIXES lib
-  PATHS
-  ~/Library/Frameworks
-  /Library/Frameworks
-  /sw
-  /opt/local
-  /opt/csw
-  /opt
-)
-unset(_lua_library_names)
-
-if (LUA_LIBRARY)
-    # include the math library for Unix
-    if (UNIX AND NOT APPLE AND NOT BEOS)
-        find_library(LUA_MATH_LIBRARY m)
-        set(LUA_LIBRARIES "${LUA_LIBRARY};${LUA_MATH_LIBRARY}")
-    # For Windows and Mac, don't need to explicitly include the math library
-    else ()
-        set(LUA_LIBRARIES "${LUA_LIBRARY}")
-    endif ()
-endif ()
-
-if (LUA_INCLUDE_DIR AND EXISTS "${LUA_INCLUDE_DIR}/lua.h")
-    # At least 5.[012] have different ways to express the version
-    # so all of them need to be tested. Lua 5.2 defines LUA_VERSION
-    # and LUA_RELEASE as joined by the C preprocessor, so avoid those.
-    file(STRINGS "${LUA_INCLUDE_DIR}/lua.h" lua_version_strings
-         REGEX "^#define[ \t]+LUA_(RELEASE[ \t]+\"Lua [0-9]|VERSION([ \t]+\"Lua [0-9]|_[MR])).*")
-
-    string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION_MAJOR[ \t]+\"([0-9])\"[ \t]*;.*" "\\1" LUA_VERSION_MAJOR ";${lua_version_strings};")
-    if (LUA_VERSION_MAJOR MATCHES "^[0-9]+$")
-        string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION_MINOR[ \t]+\"([0-9])\"[ \t]*;.*" "\\1" LUA_VERSION_MINOR ";${lua_version_strings};")
-        string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION_RELEASE[ \t]+\"([0-9])\"[ \t]*;.*" "\\1" LUA_VERSION_PATCH ";${lua_version_strings};")
-        set(LUA_VERSION_STRING "${LUA_VERSION_MAJOR}.${LUA_VERSION_MINOR}.${LUA_VERSION_PATCH}")
-    else ()
-        string(REGEX REPLACE ".*;#define[ \t]+LUA_RELEASE[ \t]+\"Lua ([0-9.]+)\"[ \t]*;.*" "\\1" LUA_VERSION_STRING ";${lua_version_strings};")
-        if (NOT LUA_VERSION_STRING MATCHES "^[0-9.]+$")
-            string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION[ \t]+\"Lua ([0-9.]+)\"[ \t]*;.*" "\\1" LUA_VERSION_STRING ";${lua_version_strings};")
-        endif ()
-        string(REGEX REPLACE "^([0-9]+)\\.[0-9.]*$" "\\1" LUA_VERSION_MAJOR "${LUA_VERSION_STRING}")
-        string(REGEX REPLACE "^[0-9]+\\.([0-9]+)[0-9.]*$" "\\1" LUA_VERSION_MINOR "${LUA_VERSION_STRING}")
-        string(REGEX REPLACE "^[0-9]+\\.[0-9]+\\.([0-9]).*" "\\1" LUA_VERSION_PATCH "${LUA_VERSION_STRING}")
-    endif ()
-
-    unset(lua_version_strings)
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-# handle the QUIETLY and REQUIRED arguments and set LUA_FOUND to TRUE if
-# all listed variables are TRUE
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Lua
-                                  REQUIRED_VARS LUA_LIBRARIES LUA_INCLUDE_DIR
-                                  VERSION_VAR LUA_VERSION_STRING)
-
-mark_as_advanced(LUA_INCLUDE_DIR LUA_LIBRARY LUA_MATH_LIBRARY)
diff --git a/share/cmake-3.2/Modules/FindMPI.cmake b/share/cmake-3.2/Modules/FindMPI.cmake
deleted file mode 100644
index 545b077..0000000
--- a/share/cmake-3.2/Modules/FindMPI.cmake
+++ /dev/null
@@ -1,665 +0,0 @@
-#.rst:
-# FindMPI
-# -------
-#
-# Find a Message Passing Interface (MPI) implementation
-#
-# The Message Passing Interface (MPI) is a library used to write
-# high-performance distributed-memory parallel applications, and is
-# typically deployed on a cluster.  MPI is a standard interface (defined
-# by the MPI forum) for which many implementations are available.  All
-# of them have somewhat different include paths, libraries to link
-# against, etc., and this module tries to smooth out those differences.
-#
-# === Variables ===
-#
-# This module will set the following variables per language in your
-# project, where <lang> is one of C, CXX, or Fortran:
-#
-# ::
-#
-#    MPI_<lang>_FOUND           TRUE if FindMPI found MPI flags for <lang>
-#    MPI_<lang>_COMPILER        MPI Compiler wrapper for <lang>
-#    MPI_<lang>_COMPILE_FLAGS   Compilation flags for MPI programs
-#    MPI_<lang>_INCLUDE_PATH    Include path(s) for MPI header
-#    MPI_<lang>_LINK_FLAGS      Linking flags for MPI programs
-#    MPI_<lang>_LIBRARIES       All libraries to link MPI programs against
-#
-# Additionally, FindMPI sets the following variables for running MPI
-# programs from the command line:
-#
-# ::
-#
-#    MPIEXEC                    Executable for running MPI programs
-#    MPIEXEC_NUMPROC_FLAG       Flag to pass to MPIEXEC before giving
-#                               it the number of processors to run on
-#    MPIEXEC_PREFLAGS           Flags to pass to MPIEXEC directly
-#                               before the executable to run.
-#    MPIEXEC_POSTFLAGS          Flags to pass to MPIEXEC after other flags
-#
-# === Usage ===
-#
-# To use this module, simply call FindMPI from a CMakeLists.txt file, or
-# run find_package(MPI), then run CMake.  If you are happy with the
-# auto- detected configuration for your language, then you're done.  If
-# not, you have two options:
-#
-# ::
-#
-#    1. Set MPI_<lang>_COMPILER to the MPI wrapper (mpicc, etc.) of your
-#       choice and reconfigure.  FindMPI will attempt to determine all the
-#       necessary variables using THAT compiler's compile and link flags.
-#    2. If this fails, or if your MPI implementation does not come with
-#       a compiler wrapper, then set both MPI_<lang>_LIBRARIES and
-#       MPI_<lang>_INCLUDE_PATH.  You may also set any other variables
-#       listed above, but these two are required.  This will circumvent
-#       autodetection entirely.
-#
-# When configuration is successful, MPI_<lang>_COMPILER will be set to
-# the compiler wrapper for <lang>, if it was found.  MPI_<lang>_FOUND
-# and other variables above will be set if any MPI implementation was
-# found for <lang>, regardless of whether a compiler was found.
-#
-# When using MPIEXEC to execute MPI applications, you should typically
-# use all of the MPIEXEC flags as follows:
-#
-# ::
-#
-#    ${MPIEXEC} ${MPIEXEC_NUMPROC_FLAG} PROCS
-#      ${MPIEXEC_PREFLAGS} EXECUTABLE ${MPIEXEC_POSTFLAGS} ARGS
-#
-# where PROCS is the number of processors on which to execute the
-# program, EXECUTABLE is the MPI program, and ARGS are the arguments to
-# pass to the MPI program.
-#
-# === Backward Compatibility ===
-#
-# For backward compatibility with older versions of FindMPI, these
-# variables are set, but deprecated:
-#
-# ::
-#
-#    MPI_FOUND           MPI_COMPILER        MPI_LIBRARY
-#    MPI_COMPILE_FLAGS   MPI_INCLUDE_PATH    MPI_EXTRA_LIBRARY
-#    MPI_LINK_FLAGS      MPI_LIBRARIES
-#
-# In new projects, please use the MPI_<lang>_XXX equivalents.
-
-#=============================================================================
-# Copyright 2001-2011 Kitware, Inc.
-# Copyright 2010-2011 Todd Gamblin tgamblin@llnl.gov
-# Copyright 2001-2009 Dave Partyka
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# include this to handle the QUIETLY and REQUIRED arguments
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-include(${CMAKE_CURRENT_LIST_DIR}/GetPrerequisites.cmake)
-
-#
-# This part detects MPI compilers, attempting to wade through the mess of compiler names in
-# a sensible way.
-#
-# The compilers are detected in this order:
-#
-# 1. Try to find the most generic available MPI compiler, as this is usually set up by
-#    cluster admins.  e.g., if plain old mpicc is available, we'll use it and assume it's
-#    the right compiler.
-#
-# 2. If a generic mpicc is NOT found, then we attempt to find one that matches
-#    CMAKE_<lang>_COMPILER_ID. e.g. if you are using XL compilers, we'll try to find mpixlc
-#    and company, but not mpiicc.  This hopefully prevents toolchain mismatches.
-#
-# If you want to force a particular MPI compiler other than what we autodetect (e.g. if you
-# want to compile regular stuff with GNU and parallel stuff with Intel), you can always set
-# your favorite MPI_<lang>_COMPILER explicitly and this stuff will be ignored.
-#
-
-# Start out with the generic MPI compiler names, as these are most commonly used.
-set(_MPI_C_COMPILER_NAMES                  mpicc    mpcc      mpicc_r mpcc_r)
-set(_MPI_CXX_COMPILER_NAMES                mpicxx   mpiCC     mpcxx   mpCC    mpic++   mpc++
-                                           mpicxx_r mpiCC_r   mpcxx_r mpCC_r  mpic++_r mpc++_r)
-set(_MPI_Fortran_COMPILER_NAMES            mpif95   mpif95_r  mpf95   mpf95_r
-                                           mpif90   mpif90_r  mpf90   mpf90_r
-                                           mpif77   mpif77_r  mpf77   mpf77_r)
-
-# GNU compiler names
-set(_MPI_GNU_C_COMPILER_NAMES              mpigcc mpgcc mpigcc_r mpgcc_r)
-set(_MPI_GNU_CXX_COMPILER_NAMES            mpig++ mpg++ mpig++_r mpg++_r)
-set(_MPI_GNU_Fortran_COMPILER_NAMES        mpigfortran mpgfortran mpigfortran_r mpgfortran_r
-                                           mpig77 mpig77_r mpg77 mpg77_r)
-
-# Intel MPI compiler names
-set(_MPI_Intel_C_COMPILER_NAMES            mpiicc)
-set(_MPI_Intel_CXX_COMPILER_NAMES          mpiicpc  mpiicxx mpiic++ mpiiCC)
-set(_MPI_Intel_Fortran_COMPILER_NAMES      mpiifort mpiif95 mpiif90 mpiif77)
-
-# PGI compiler names
-set(_MPI_PGI_C_COMPILER_NAMES              mpipgcc mppgcc)
-set(_MPI_PGI_CXX_COMPILER_NAMES            mpipgCC mppgCC)
-set(_MPI_PGI_Fortran_COMPILER_NAMES        mpipgf95 mpipgf90 mppgf95 mppgf90 mpipgf77 mppgf77)
-
-# XLC MPI Compiler names
-set(_MPI_XL_C_COMPILER_NAMES               mpxlc      mpxlc_r    mpixlc     mpixlc_r)
-set(_MPI_XL_CXX_COMPILER_NAMES             mpixlcxx   mpixlC     mpixlc++   mpxlcxx   mpxlc++   mpixlc++   mpxlCC
-                                           mpixlcxx_r mpixlC_r   mpixlc++_r mpxlcxx_r mpxlc++_r mpixlc++_r mpxlCC_r)
-set(_MPI_XL_Fortran_COMPILER_NAMES         mpixlf95   mpixlf95_r mpxlf95 mpxlf95_r
-                                           mpixlf90   mpixlf90_r mpxlf90 mpxlf90_r
-                                           mpixlf77   mpixlf77_r mpxlf77 mpxlf77_r
-                                           mpixlf     mpixlf_r   mpxlf   mpxlf_r)
-
-# append vendor-specific compilers to the list if we either don't know the compiler id,
-# or if we know it matches the regular compiler.
-foreach (lang C CXX Fortran)
-  foreach (id GNU Intel PGI XL)
-    if (NOT CMAKE_${lang}_COMPILER_ID OR CMAKE_${lang}_COMPILER_ID STREQUAL id)
-      list(APPEND _MPI_${lang}_COMPILER_NAMES ${_MPI_${id}_${lang}_COMPILER_NAMES})
-    endif()
-    unset(_MPI_${id}_${lang}_COMPILER_NAMES)    # clean up the namespace here
-  endforeach()
-endforeach()
-
-
-# Names to try for MPI exec
-set(_MPI_EXEC_NAMES                        mpiexec mpirun lamexec srun)
-
-# Grab the path to MPI from the registry if we're on windows.
-set(_MPI_PREFIX_PATH)
-if(WIN32)
-  # MSMPI
-  file(TO_CMAKE_PATH "$ENV{MSMPI_BIN}" msmpi_bin_path) # The default path ends with a '\' and doesn't mix with ';' when appending.
-  list(APPEND _MPI_PREFIX_PATH "${msmpi_bin_path}")
-  unset(msmpi_bin_path)
-  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\MPI;InstallRoot]/Bin")
-  list(APPEND _MPI_PREFIX_PATH "$ENV{MSMPI_INC}/..") # The SDK is installed separately from the runtime
-  # MPICH
-  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH\\SMPD;binary]/..")
-  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH2;Path]")
-  list(APPEND _MPI_PREFIX_PATH "$ENV{ProgramW6432}/MPICH2/")
-endif()
-
-# Build a list of prefixes to search for MPI.
-foreach(SystemPrefixDir ${CMAKE_SYSTEM_PREFIX_PATH})
-  foreach(MpiPackageDir ${_MPI_PREFIX_PATH})
-    if(EXISTS ${SystemPrefixDir}/${MpiPackageDir})
-      list(APPEND _MPI_PREFIX_PATH "${SystemPrefixDir}/${MpiPackageDir}")
-    endif()
-  endforeach()
-endforeach()
-
-function (_mpi_check_compiler compiler options cmdvar resvar)
-  execute_process(
-    COMMAND "${compiler}" ${options}
-    OUTPUT_VARIABLE  cmdline OUTPUT_STRIP_TRAILING_WHITESPACE
-    ERROR_VARIABLE   cmdline ERROR_STRIP_TRAILING_WHITESPACE
-    RESULT_VARIABLE  success)
-  # Intel MPI 5.0.1 will return a zero return code even when the
-  # argument to the MPI compiler wrapper is unknown.  Attempt to
-  # catch this case.
-  if("${cmdline}" MATCHES "undefined reference")
-    set(success 255 )
-  endif()
-  set(${cmdvar} "${cmdline}" PARENT_SCOPE)
-  set(${resvar} "${success}" PARENT_SCOPE)
-endfunction()
-
-#
-# interrogate_mpi_compiler(lang try_libs)
-#
-# Attempts to extract compiler and linker args from an MPI compiler. The arguments set
-# by this function are:
-#
-#   MPI_<lang>_INCLUDE_PATH    MPI_<lang>_LINK_FLAGS     MPI_<lang>_FOUND
-#   MPI_<lang>_COMPILE_FLAGS   MPI_<lang>_LIBRARIES
-#
-# MPI_<lang>_COMPILER must be set beforehand to the absolute path to an MPI compiler for
-# <lang>.  Additionally, MPI_<lang>_INCLUDE_PATH and MPI_<lang>_LIBRARIES may be set
-# to skip autodetection.
-#
-# If try_libs is TRUE, this will also attempt to find plain MPI libraries in the usual
-# way.  In general, this is not as effective as interrogating the compilers, as it
-# ignores language-specific flags and libraries.  However, some MPI implementations
-# (Windows implementations) do not have compiler wrappers, so this approach must be used.
-#
-function (interrogate_mpi_compiler lang try_libs)
-  # MPI_${lang}_NO_INTERROGATE will be set to a compiler name when the *regular* compiler was
-  # discovered to be the MPI compiler.  This happens on machines like the Cray XE6 that use
-  # modules to set cc, CC, and ftn to the MPI compilers.  If the user force-sets another MPI
-  # compiler, MPI_${lang}_COMPILER won't be equal to MPI_${lang}_NO_INTERROGATE, and we'll
-  # inspect that compiler anew.  This allows users to set new compilers w/o rm'ing cache.
-  string(COMPARE NOTEQUAL "${MPI_${lang}_NO_INTERROGATE}" "${MPI_${lang}_COMPILER}" interrogate)
-
-  # If MPI is set already in the cache, don't bother with interrogating the compiler.
-  if (interrogate AND ((NOT MPI_${lang}_INCLUDE_PATH) OR (NOT MPI_${lang}_LIBRARIES)))
-    if (MPI_${lang}_COMPILER)
-      # Check whether the -showme:compile option works. This indicates that we have either OpenMPI
-      # or a newer version of LAM-MPI, and implies that -showme:link will also work.
-      _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme:compile" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
-      if (MPI_COMPILER_RETURN EQUAL 0)
-        # If we appear to have -showme:compile, then we should
-        # also have -showme:link. Try it.
-        execute_process(
-          COMMAND ${MPI_${lang}_COMPILER} -showme:link
-          OUTPUT_VARIABLE  MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE
-          ERROR_VARIABLE   MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE
-          RESULT_VARIABLE  MPI_COMPILER_RETURN)
-
-        if (MPI_COMPILER_RETURN EQUAL 0)
-          # We probably have -showme:incdirs and -showme:libdirs as well,
-          # so grab that while we're at it.
-          execute_process(
-            COMMAND ${MPI_${lang}_COMPILER} -showme:incdirs
-            OUTPUT_VARIABLE  MPI_INCDIRS OUTPUT_STRIP_TRAILING_WHITESPACE
-            ERROR_VARIABLE   MPI_INCDIRS ERROR_STRIP_TRAILING_WHITESPACE)
-
-          execute_process(
-            COMMAND ${MPI_${lang}_COMPILER} -showme:libdirs
-            OUTPUT_VARIABLE  MPI_LIBDIRS OUTPUT_STRIP_TRAILING_WHITESPACE
-            ERROR_VARIABLE   MPI_LIBDIRS ERROR_STRIP_TRAILING_WHITESPACE)
-
-        else()
-          # reset things here if something went wrong.
-          set(MPI_COMPILE_CMDLINE)
-          set(MPI_LINK_CMDLINE)
-        endif()
-      endif ()
-
-      # Older versions of LAM-MPI have "-showme". Try to find that.
-      if (NOT MPI_COMPILER_RETURN EQUAL 0)
-        _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
-      endif()
-
-      # MVAPICH uses -compile-info and -link-info.  Try them.
-      if (NOT MPI_COMPILER_RETURN EQUAL 0)
-        _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-compile-info" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
-
-        # If we have compile-info, also have link-info.
-        if (MPI_COMPILER_RETURN EQUAL 0)
-          execute_process(
-            COMMAND ${MPI_${lang}_COMPILER} -link-info
-            OUTPUT_VARIABLE  MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE
-            ERROR_VARIABLE   MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE
-            RESULT_VARIABLE  MPI_COMPILER_RETURN)
-        endif()
-
-        # make sure we got compile and link.  Reset vars if something's wrong.
-        if (NOT MPI_COMPILER_RETURN EQUAL 0)
-          set(MPI_COMPILE_CMDLINE)
-          set(MPI_LINK_CMDLINE)
-        endif()
-      endif()
-
-      # MPICH just uses "-show". Try it.
-      if (NOT MPI_COMPILER_RETURN EQUAL 0)
-        _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-show" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
-      endif()
-
-      if (MPI_COMPILER_RETURN EQUAL 0)
-        # We have our command lines, but we might need to copy MPI_COMPILE_CMDLINE
-        # into MPI_LINK_CMDLINE, if we didn't find the link line.
-        if (NOT MPI_LINK_CMDLINE)
-          set(MPI_LINK_CMDLINE ${MPI_COMPILE_CMDLINE})
-        endif()
-      else()
-        message(STATUS "Unable to determine MPI from MPI driver ${MPI_${lang}_COMPILER}")
-        set(MPI_COMPILE_CMDLINE)
-        set(MPI_LINK_CMDLINE)
-      endif()
-
-      # Here, we're done with the interrogation part, and we'll try to extract args we care
-      # about from what we learned from the compiler wrapper scripts.
-
-      # If interrogation came back with something, extract our variable from the MPI command line
-      if (MPI_COMPILE_CMDLINE OR MPI_LINK_CMDLINE)
-        # Extract compile flags from the compile command line.
-        string(REGEX MATCHALL "(^| )-[Df]([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_FLAGS "${MPI_COMPILE_CMDLINE}")
-        set(MPI_COMPILE_FLAGS_WORK)
-
-        foreach(FLAG ${MPI_ALL_COMPILE_FLAGS})
-          if (MPI_COMPILE_FLAGS_WORK)
-            set(MPI_COMPILE_FLAGS_WORK "${MPI_COMPILE_FLAGS_WORK} ${FLAG}")
-          else()
-            set(MPI_COMPILE_FLAGS_WORK ${FLAG})
-          endif()
-        endforeach()
-
-        # Extract include paths from compile command line
-        string(REGEX MATCHALL "(^| )-I([^\" ]+|\"[^\"]+\")" MPI_ALL_INCLUDE_PATHS "${MPI_COMPILE_CMDLINE}")
-        foreach(IPATH ${MPI_ALL_INCLUDE_PATHS})
-          string(REGEX REPLACE "^ ?-I" "" IPATH ${IPATH})
-          string(REPLACE "//" "/" IPATH ${IPATH})
-          list(APPEND MPI_INCLUDE_PATH_WORK ${IPATH})
-        endforeach()
-
-        # try using showme:incdirs if extracting didn't work.
-        if (NOT MPI_INCLUDE_PATH_WORK)
-          set(MPI_INCLUDE_PATH_WORK ${MPI_INCDIRS})
-          separate_arguments(MPI_INCLUDE_PATH_WORK)
-        endif()
-
-        # If all else fails, just search for mpi.h in the normal include paths.
-        if (NOT MPI_INCLUDE_PATH_WORK)
-          set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
-          find_path(MPI_HEADER_PATH mpi.h
-            HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-            PATH_SUFFIXES include)
-          set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH})
-        endif()
-
-        # Extract linker paths from the link command line
-        string(REGEX MATCHALL "(^| |-Wl,)-L([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_PATHS "${MPI_LINK_CMDLINE}")
-        set(MPI_LINK_PATH)
-        foreach(LPATH ${MPI_ALL_LINK_PATHS})
-          string(REGEX REPLACE "^(| |-Wl,)-L" "" LPATH ${LPATH})
-          string(REPLACE "//" "/" LPATH ${LPATH})
-          list(APPEND MPI_LINK_PATH ${LPATH})
-        endforeach()
-
-        # try using showme:libdirs if extracting didn't work.
-        if (NOT MPI_LINK_PATH)
-          set(MPI_LINK_PATH ${MPI_LIBDIRS})
-          separate_arguments(MPI_LINK_PATH)
-        endif()
-
-        # Extract linker flags from the link command line
-        string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker )([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_FLAGS "${MPI_LINK_CMDLINE}")
-        set(MPI_LINK_FLAGS_WORK)
-        foreach(FLAG ${MPI_ALL_LINK_FLAGS})
-          if (MPI_LINK_FLAGS_WORK)
-            set(MPI_LINK_FLAGS_WORK "${MPI_LINK_FLAGS_WORK} ${FLAG}")
-          else()
-            set(MPI_LINK_FLAGS_WORK ${FLAG})
-          endif()
-        endforeach()
-
-        # Extract the set of libraries to link against from the link command
-        # line
-        string(REGEX MATCHALL "(^| )-l([^\" ]+|\"[^\"]+\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}")
-
-        # add the compiler implicit directories because some compilers
-        # such as the intel compiler have libraries that show up
-        # in the showme list that can only be found in the implicit
-        # link directories of the compiler.
-        if (DEFINED CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES)
-          set(MPI_LINK_PATH
-            "${MPI_LINK_PATH};${CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES}")
-        endif ()
-
-        # Determine full path names for all of the libraries that one needs
-        # to link against in an MPI program
-        foreach(LIB ${MPI_LIBNAMES})
-          string(REGEX REPLACE "^ ?-l" "" LIB ${LIB})
-          # MPI_LIB is cached by find_library, but we don't want that.  Clear it first.
-          set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
-          find_library(MPI_LIB NAMES ${LIB} HINTS ${MPI_LINK_PATH})
-
-          if (MPI_LIB)
-            list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB})
-          elseif (NOT MPI_FIND_QUIETLY)
-            message(WARNING "Unable to find MPI library ${LIB}")
-          endif()
-        endforeach()
-
-        # Sanity check MPI_LIBRARIES to make sure there are enough libraries
-        list(LENGTH MPI_LIBRARIES_WORK MPI_NUMLIBS)
-        list(LENGTH MPI_LIBNAMES MPI_NUMLIBS_EXPECTED)
-        if (NOT MPI_NUMLIBS EQUAL MPI_NUMLIBS_EXPECTED)
-          set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND")
-        endif()
-      endif()
-
-    elseif(try_libs)
-      # If we didn't have an MPI compiler script to interrogate, attempt to find everything
-      # with plain old find functions.  This is nasty because MPI implementations have LOTS of
-      # different library names, so this section isn't going to be very generic.  We need to
-      # make sure it works for MS MPI, though, since there are no compiler wrappers for that.
-      find_path(MPI_HEADER_PATH mpi.h
-        HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-        PATH_SUFFIXES include Inc)
-      set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH})
-
-      # Decide between 32-bit and 64-bit libraries for Microsoft's MPI
-      if("${CMAKE_SIZEOF_VOID_P}" EQUAL 8)
-        set(MS_MPI_ARCH_DIR x64)
-        set(MS_MPI_ARCH_DIR2 amd64)
-      else()
-        set(MS_MPI_ARCH_DIR x86)
-        set(MS_MPI_ARCH_DIR2 i386)
-      endif()
-
-      set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
-      find_library(MPI_LIB
-        NAMES         mpi mpich mpich2 msmpi
-        HINTS         ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-        PATH_SUFFIXES lib lib/${MS_MPI_ARCH_DIR} Lib Lib/${MS_MPI_ARCH_DIR} Lib/${MS_MPI_ARCH_DIR2})
-      set(MPI_LIBRARIES_WORK ${MPI_LIB})
-
-      # Right now, we only know about the extra libs for C++.
-      # We could add Fortran here (as there is usually libfmpich, etc.), but
-      # this really only has to work with MS MPI on Windows.
-      # Assume that other MPI's are covered by the compiler wrappers.
-      if (${lang} STREQUAL CXX)
-        set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
-        find_library(MPI_LIB
-          NAMES         mpi++ mpicxx cxx mpi_cxx
-          HINTS         ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
-          PATH_SUFFIXES lib)
-        if (MPI_LIBRARIES_WORK AND MPI_LIB)
-          list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB})
-        endif()
-      endif()
-
-      if (NOT MPI_LIBRARIES_WORK)
-        set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND")
-      endif()
-    endif()
-
-    # If we found MPI, set up all of the appropriate cache entries
-    set(MPI_${lang}_COMPILE_FLAGS ${MPI_COMPILE_FLAGS_WORK} CACHE STRING "MPI ${lang} compilation flags"         FORCE)
-    set(MPI_${lang}_INCLUDE_PATH  ${MPI_INCLUDE_PATH_WORK}  CACHE STRING "MPI ${lang} include path"              FORCE)
-    set(MPI_${lang}_LINK_FLAGS    ${MPI_LINK_FLAGS_WORK}    CACHE STRING "MPI ${lang} linking flags"             FORCE)
-    set(MPI_${lang}_LIBRARIES     ${MPI_LIBRARIES_WORK}     CACHE STRING "MPI ${lang} libraries to link against" FORCE)
-    mark_as_advanced(MPI_${lang}_COMPILE_FLAGS MPI_${lang}_INCLUDE_PATH MPI_${lang}_LINK_FLAGS MPI_${lang}_LIBRARIES)
-
-    # clear out our temporary lib/header detectionv variable here.
-    set(MPI_LIB         "MPI_LIB-NOTFOUND"         CACHE INTERNAL "Scratch variable for MPI lib detection"    FORCE)
-    set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE INTERNAL "Scratch variable for MPI header detection" FORCE)
-  endif()
-
-  # finally set a found variable for each MPI language
-  if (MPI_${lang}_INCLUDE_PATH AND MPI_${lang}_LIBRARIES)
-    set(MPI_${lang}_FOUND TRUE PARENT_SCOPE)
-  else()
-    set(MPI_${lang}_FOUND FALSE PARENT_SCOPE)
-  endif()
-endfunction()
-
-
-# This function attempts to compile with the regular compiler, to see if MPI programs
-# work with it.  This is a last ditch attempt after we've tried interrogating mpicc and
-# friends, and after we've tried to find generic libraries.  Works on machines like
-# Cray XE6, where the modules environment changes what MPI version cc, CC, and ftn use.
-function(try_regular_compiler lang success)
-  set(scratch_directory ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY})
-  if (${lang} STREQUAL Fortran)
-    set(test_file ${scratch_directory}/cmake_mpi_test.f90)
-    file(WRITE ${test_file}
-      "program hello\n"
-      "include 'mpif.h'\n"
-      "integer ierror\n"
-      "call MPI_INIT(ierror)\n"
-      "call MPI_FINALIZE(ierror)\n"
-      "end\n")
-  else()
-    if (${lang} STREQUAL CXX)
-      set(test_file ${scratch_directory}/cmake_mpi_test.cpp)
-    else()
-      set(test_file ${scratch_directory}/cmake_mpi_test.c)
-    endif()
-    file(WRITE ${test_file}
-      "#include <mpi.h>\n"
-      "int main(int argc, char **argv) {\n"
-      "  MPI_Init(&argc, &argv);\n"
-      "  MPI_Finalize();\n"
-      "}\n")
-  endif()
-  try_compile(compiler_has_mpi ${scratch_directory} ${test_file})
-  if (compiler_has_mpi)
-    set(MPI_${lang}_NO_INTERROGATE ${CMAKE_${lang}_COMPILER} CACHE STRING "Whether to interrogate MPI ${lang} compiler" FORCE)
-    set(MPI_${lang}_COMPILER       ${CMAKE_${lang}_COMPILER} CACHE STRING "MPI ${lang} compiler"                        FORCE)
-    set(MPI_${lang}_COMPILE_FLAGS  ""                        CACHE STRING "MPI ${lang} compilation flags"               FORCE)
-    set(MPI_${lang}_INCLUDE_PATH   ""                        CACHE STRING "MPI ${lang} include path"                    FORCE)
-    set(MPI_${lang}_LINK_FLAGS     ""                        CACHE STRING "MPI ${lang} linking flags"                   FORCE)
-    set(MPI_${lang}_LIBRARIES      ""                        CACHE STRING "MPI ${lang} libraries to link against"       FORCE)
-  endif()
-  set(${success} ${compiler_has_mpi} PARENT_SCOPE)
-  unset(compiler_has_mpi CACHE)
-endfunction()
-
-# End definitions, commence real work here.
-
-# Most mpi distros have some form of mpiexec which gives us something we can reliably look for.
-find_program(MPIEXEC
-  NAMES ${_MPI_EXEC_NAMES}
-  HINTS ${MPI_HOME} $ENV{MPI_HOME}
-  PATHS ${_MPI_PREFIX_PATH}
-  PATH_SUFFIXES bin
-  DOC "Executable for running MPI programs.")
-
-# call get_filename_component twice to remove mpiexec and the directory it exists in (typically bin).
-# This gives us a fairly reliable base directory to search for /bin /lib and /include from.
-get_filename_component(_MPI_BASE_DIR "${MPIEXEC}" PATH)
-get_filename_component(_MPI_BASE_DIR "${_MPI_BASE_DIR}" PATH)
-
-set(MPIEXEC_NUMPROC_FLAG "-np" CACHE STRING "Flag used by MPI to specify the number of processes for MPIEXEC; the next option will be the number of processes.")
-set(MPIEXEC_PREFLAGS     ""    CACHE STRING "These flags will be directly before the executable that is being run by MPIEXEC.")
-set(MPIEXEC_POSTFLAGS    ""    CACHE STRING "These flags will come after all flags given to MPIEXEC.")
-set(MPIEXEC_MAX_NUMPROCS "2"   CACHE STRING "Maximum number of processors available to run MPI applications.")
-mark_as_advanced(MPIEXEC MPIEXEC_NUMPROC_FLAG MPIEXEC_PREFLAGS MPIEXEC_POSTFLAGS MPIEXEC_MAX_NUMPROCS)
-
-
-#=============================================================================
-# Backward compatibility input hacks.  Propagate the FindMPI hints to C and
-# CXX if the respective new versions are not defined.  Translate the old
-# MPI_LIBRARY and MPI_EXTRA_LIBRARY to respective MPI_${lang}_LIBRARIES.
-#
-# Once we find the new variables, we translate them back into their old
-# equivalents below.
-foreach (lang C CXX)
-  # Old input variables.
-  set(_MPI_OLD_INPUT_VARS COMPILER COMPILE_FLAGS INCLUDE_PATH LINK_FLAGS)
-
-  # Set new vars based on their old equivalents, if the new versions are not already set.
-  foreach (var ${_MPI_OLD_INPUT_VARS})
-    if (NOT MPI_${lang}_${var} AND MPI_${var})
-      set(MPI_${lang}_${var} "${MPI_${var}}")
-    endif()
-  endforeach()
-
-  # Special handling for MPI_LIBRARY and MPI_EXTRA_LIBRARY, which we nixed in the
-  # new FindMPI.  These need to be merged into MPI_<lang>_LIBRARIES
-  if (NOT MPI_${lang}_LIBRARIES AND (MPI_LIBRARY OR MPI_EXTRA_LIBRARY))
-    set(MPI_${lang}_LIBRARIES ${MPI_LIBRARY} ${MPI_EXTRA_LIBRARY})
-  endif()
-endforeach()
-#=============================================================================
-
-
-# This loop finds the compilers and sends them off for interrogation.
-foreach (lang C CXX Fortran)
-  if (CMAKE_${lang}_COMPILER_WORKS)
-    # If the user supplies a compiler *name* instead of an absolute path, assume that we need to find THAT compiler.
-    if (MPI_${lang}_COMPILER)
-      is_file_executable(MPI_${lang}_COMPILER MPI_COMPILER_IS_EXECUTABLE)
-      if (NOT MPI_COMPILER_IS_EXECUTABLE)
-        # Get rid of our default list of names and just search for the name the user wants.
-        set(_MPI_${lang}_COMPILER_NAMES ${MPI_${lang}_COMPILER})
-        set(MPI_${lang}_COMPILER "MPI_${lang}_COMPILER-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
-        # If the user specifies a compiler, we don't want to try to search libraries either.
-        set(try_libs FALSE)
-      endif()
-    else()
-      set(try_libs TRUE)
-    endif()
-
-    find_program(MPI_${lang}_COMPILER
-      NAMES  ${_MPI_${lang}_COMPILER_NAMES}
-      HINTS  ${_MPI_BASE_DIR}/bin
-      PATHS  ${_MPI_PREFIX_PATH}
-      )
-    interrogate_mpi_compiler(${lang} ${try_libs})
-    mark_as_advanced(MPI_${lang}_COMPILER)
-
-    # last ditch try -- if nothing works so far, just try running the regular compiler and
-    # see if we can create an MPI executable.
-    set(regular_compiler_worked 0)
-    if (NOT MPI_${lang}_LIBRARIES OR NOT MPI_${lang}_INCLUDE_PATH)
-      try_regular_compiler(${lang} regular_compiler_worked)
-    endif()
-
-    set(MPI_${lang}_FIND_QUIETLY ${MPI_FIND_QUIETLY})
-    set(MPI_${lang}_FIND_REQUIRED ${MPI_FIND_REQUIRED})
-    set(MPI_${lang}_FIND_VERSION ${MPI_FIND_VERSION})
-    set(MPI_${lang}_FIND_VERSION_EXACT ${MPI_FIND_VERSION_EXACT})
-
-    if (regular_compiler_worked)
-      find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_COMPILER)
-    else()
-      find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_LIBRARIES MPI_${lang}_INCLUDE_PATH)
-    endif()
-  endif()
-endforeach()
-
-
-#=============================================================================
-# More backward compatibility stuff
-#
-# Bare MPI sans ${lang} vars are set to CXX then C, depending on what was found.
-# This mimics the behavior of the old language-oblivious FindMPI.
-set(_MPI_OLD_VARS FOUND COMPILER INCLUDE_PATH COMPILE_FLAGS LINK_FLAGS LIBRARIES)
-if (MPI_CXX_FOUND)
-  foreach (var ${_MPI_OLD_VARS})
-    set(MPI_${var} ${MPI_CXX_${var}})
-  endforeach()
-elseif (MPI_C_FOUND)
-  foreach (var ${_MPI_OLD_VARS})
-    set(MPI_${var} ${MPI_C_${var}})
-  endforeach()
-else()
-  # Note that we might still have found Fortran, but you'll need to use MPI_Fortran_FOUND
-  set(MPI_FOUND FALSE)
-endif()
-
-# Chop MPI_LIBRARIES into the old-style MPI_LIBRARY and MPI_EXTRA_LIBRARY, and set them in cache.
-if (MPI_LIBRARIES)
-  list(GET MPI_LIBRARIES 0 MPI_LIBRARY_WORK)
-  set(MPI_LIBRARY ${MPI_LIBRARY_WORK} CACHE FILEPATH "MPI library to link against" FORCE)
-else()
-  set(MPI_LIBRARY "MPI_LIBRARY-NOTFOUND" CACHE FILEPATH "MPI library to link against" FORCE)
-endif()
-
-list(LENGTH MPI_LIBRARIES MPI_NUMLIBS)
-if (MPI_NUMLIBS GREATER 1)
-  set(MPI_EXTRA_LIBRARY_WORK ${MPI_LIBRARIES})
-  list(REMOVE_AT MPI_EXTRA_LIBRARY_WORK 0)
-  set(MPI_EXTRA_LIBRARY ${MPI_EXTRA_LIBRARY_WORK} CACHE STRING "Extra MPI libraries to link against" FORCE)
-else()
-  set(MPI_EXTRA_LIBRARY "MPI_EXTRA_LIBRARY-NOTFOUND" CACHE STRING "Extra MPI libraries to link against" FORCE)
-endif()
-#=============================================================================
-
-# unset these vars to cleanup namespace
-unset(_MPI_OLD_VARS)
-unset(_MPI_PREFIX_PATH)
-unset(_MPI_BASE_DIR)
-foreach (lang C CXX Fortran)
-  unset(_MPI_${lang}_COMPILER_NAMES)
-endforeach()
diff --git a/share/cmake-3.2/Modules/FindMatlab.cmake b/share/cmake-3.2/Modules/FindMatlab.cmake
deleted file mode 100644
index 474556e..0000000
--- a/share/cmake-3.2/Modules/FindMatlab.cmake
+++ /dev/null
@@ -1,128 +0,0 @@
-#.rst:
-# FindMatlab
-# ----------
-#
-# this module looks for Matlab
-#
-# Defines:
-#
-# ::
-#
-#   MATLAB_INCLUDE_DIR: include path for mex.h, engine.h
-#   MATLAB_LIBRARIES:   required libraries: libmex, etc
-#   MATLAB_MEX_LIBRARY: path to libmex.lib
-#   MATLAB_MX_LIBRARY:  path to libmx.lib
-#   MATLAB_ENG_LIBRARY: path to libeng.lib
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(MATLAB_FOUND 0)
-if(WIN32)
-  if(${CMAKE_GENERATOR} MATCHES "Visual Studio 6")
-    set(MATLAB_ROOT "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MathWorks\\MATLAB\\7.0;MATLABROOT]/extern/lib/win32/microsoft/msvc60")
-  else()
-    if(${CMAKE_GENERATOR} MATCHES "Visual Studio 7")
-      # Assume people are generally using 7.1,
-      # if using 7.0 need to link to: ../extern/lib/win32/microsoft/msvc70
-      set(MATLAB_ROOT "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MathWorks\\MATLAB\\7.0;MATLABROOT]/extern/lib/win32/microsoft/msvc71")
-    else()
-      if(${CMAKE_GENERATOR} MATCHES "Borland")
-        # Same here, there are also: bcc50 and bcc51 directories
-        set(MATLAB_ROOT "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MathWorks\\MATLAB\\7.0;MATLABROOT]/extern/lib/win32/microsoft/bcc54")
-      else()
-        if(MATLAB_FIND_REQUIRED)
-          message(FATAL_ERROR "Generator not compatible: ${CMAKE_GENERATOR}")
-        endif()
-      endif()
-    endif()
-  endif()
-  find_library(MATLAB_MEX_LIBRARY
-    libmex
-    ${MATLAB_ROOT}
-    )
-  find_library(MATLAB_MX_LIBRARY
-    libmx
-    ${MATLAB_ROOT}
-    )
-  find_library(MATLAB_ENG_LIBRARY
-    libeng
-    ${MATLAB_ROOT}
-    )
-
-  find_path(MATLAB_INCLUDE_DIR
-    "mex.h"
-    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MathWorks\\MATLAB\\7.0;MATLABROOT]/extern/include"
-    )
-else()
-  if(CMAKE_SIZEOF_VOID_P EQUAL 4)
-    # Regular x86
-    set(MATLAB_ROOT
-      /usr/local/matlab-7sp1/bin/glnx86/
-      /opt/matlab-7sp1/bin/glnx86/
-      $ENV{HOME}/matlab-7sp1/bin/glnx86/
-      $ENV{HOME}/redhat-matlab/bin/glnx86/
-      )
-  else()
-    # AMD64:
-    set(MATLAB_ROOT
-      /usr/local/matlab-7sp1/bin/glnxa64/
-      /opt/matlab-7sp1/bin/glnxa64/
-      $ENV{HOME}/matlab7_64/bin/glnxa64/
-      $ENV{HOME}/matlab-7sp1/bin/glnxa64/
-      $ENV{HOME}/redhat-matlab/bin/glnxa64/
-      )
-  endif()
-  find_library(MATLAB_MEX_LIBRARY
-    mex
-    ${MATLAB_ROOT}
-    )
-  find_library(MATLAB_MX_LIBRARY
-    mx
-    ${MATLAB_ROOT}
-    )
-  find_library(MATLAB_ENG_LIBRARY
-    eng
-    ${MATLAB_ROOT}
-    )
-  find_path(MATLAB_INCLUDE_DIR
-    "mex.h"
-    "/usr/local/matlab-7sp1/extern/include/"
-    "/opt/matlab-7sp1/extern/include/"
-    "$ENV{HOME}/matlab-7sp1/extern/include/"
-    "$ENV{HOME}/redhat-matlab/extern/include/"
-    )
-
-endif()
-
-# This is common to UNIX and Win32:
-set(MATLAB_LIBRARIES
-  ${MATLAB_MEX_LIBRARY}
-  ${MATLAB_MX_LIBRARY}
-  ${MATLAB_ENG_LIBRARY}
-)
-
-if(MATLAB_INCLUDE_DIR AND MATLAB_LIBRARIES)
-  set(MATLAB_FOUND 1)
-endif()
-
-mark_as_advanced(
-  MATLAB_LIBRARIES
-  MATLAB_MEX_LIBRARY
-  MATLAB_MX_LIBRARY
-  MATLAB_ENG_LIBRARY
-  MATLAB_INCLUDE_DIR
-  MATLAB_FOUND
-  MATLAB_ROOT
-)
-
diff --git a/share/cmake-3.2/Modules/FindOpenAL.cmake b/share/cmake-3.2/Modules/FindOpenAL.cmake
deleted file mode 100644
index 8150ff2..0000000
--- a/share/cmake-3.2/Modules/FindOpenAL.cmake
+++ /dev/null
@@ -1,103 +0,0 @@
-#.rst:
-# FindOpenAL
-# ----------
-#
-#
-#
-# Locate OpenAL This module defines OPENAL_LIBRARY OPENAL_FOUND, if
-# false, do not try to link to OpenAL OPENAL_INCLUDE_DIR, where to find
-# the headers
-#
-# $OPENALDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OPENALDIR used in building OpenAL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module.
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This makes the presumption that you are include al.h like
-# #include "al.h"
-# and not
-# #include <AL/al.h>
-# The reason for this is that the latter is not entirely portable.
-# Windows/Creative Labs does not by default put their headers in AL/ and
-# OS X uses the convention <OpenAL/al.h>.
-#
-# For Windows, Creative Labs seems to have added a registry key for their
-# OpenAL 1.1 installer. I have added that key to the list of search paths,
-# however, the key looks like it could be a little fragile depending on
-# if they decide to change the 1.00.0000 number for bug fix releases.
-# Also, they seem to have laid down groundwork for multiple library platforms
-# which puts the library in an extra subdirectory. Currently there is only
-# Win32 and I have hardcoded that here. This may need to be adjusted as
-# platforms are introduced.
-# The OpenAL 1.0 installer doesn't seem to have a useful key I can use.
-# I do not know if the Nvidia OpenAL SDK has a registry key.
-#
-# For OS X, remember that OpenAL was added by Apple in 10.4 (Tiger).
-# To support the framework, I originally wrote special framework detection
-# code in this module which I have now removed with CMake's introduction
-# of native support for frameworks.
-# In addition, OpenAL is open source, and it is possible to compile on Panther.
-# Furthermore, due to bugs in the initial OpenAL release, and the
-# transition to OpenAL 1.1, it is common to need to override the built-in
-# framework.
-# Per my request, CMake should search for frameworks first in
-# the following order:
-# ~/Library/Frameworks/OpenAL.framework/Headers
-# /Library/Frameworks/OpenAL.framework/Headers
-# /System/Library/Frameworks/OpenAL.framework/Headers
-#
-# On OS X, this will prefer the Framework version (if found) over others.
-# People will have to manually change the cache values of
-# OPENAL_LIBRARY to override this selection or set the CMake environment
-# CMAKE_INCLUDE_PATH to modify the search paths.
-
-find_path(OPENAL_INCLUDE_DIR al.h
-  HINTS
-    ENV OPENALDIR
-  PATH_SUFFIXES include/AL include/OpenAL include
-  PATHS
-  ~/Library/Frameworks
-  /Library/Frameworks
-  /sw # Fink
-  /opt/local # DarwinPorts
-  /opt/csw # Blastwave
-  /opt
-  [HKEY_LOCAL_MACHINE\\SOFTWARE\\Creative\ Labs\\OpenAL\ 1.1\ Software\ Development\ Kit\\1.00.0000;InstallDir]
-)
-
-find_library(OPENAL_LIBRARY
-  NAMES OpenAL al openal OpenAL32
-  HINTS
-    ENV OPENALDIR
-  PATH_SUFFIXES lib64 lib libs64 libs libs/Win32 libs/Win64
-  PATHS
-  ~/Library/Frameworks
-  /Library/Frameworks
-  /sw
-  /opt/local
-  /opt/csw
-  /opt
-  [HKEY_LOCAL_MACHINE\\SOFTWARE\\Creative\ Labs\\OpenAL\ 1.1\ Software\ Development\ Kit\\1.00.0000;InstallDir]
-)
-
-
-# handle the QUIETLY and REQUIRED arguments and set OPENAL_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(OpenAL  DEFAULT_MSG  OPENAL_LIBRARY OPENAL_INCLUDE_DIR)
-
-mark_as_advanced(OPENAL_LIBRARY OPENAL_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindOpenGL.cmake b/share/cmake-3.2/Modules/FindOpenGL.cmake
deleted file mode 100644
index a7eefa7..0000000
--- a/share/cmake-3.2/Modules/FindOpenGL.cmake
+++ /dev/null
@@ -1,176 +0,0 @@
-#.rst:
-# FindOpenGL
-# ----------
-#
-# FindModule for OpenGL and GLU.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module sets the following variables:
-#
-# ``OPENGL_FOUND``
-#  True, if the system has OpenGL.
-# ``OPENGL_XMESA_FOUND``
-#  True, if the system has XMESA.
-# ``OPENGL_GLU_FOUND``
-#  True, if the system has GLU.
-# ``OPENGL_INCLUDE_DIR``
-#  Path to the OpenGL include directory.
-# ``OPENGL_LIBRARIES``
-#  Paths to the OpenGL and GLU libraries.
-#
-# If you want to use just GL you can use these values:
-#
-# ``OPENGL_gl_LIBRARY``
-#  Path to the OpenGL library.
-# ``OPENGL_glu_LIBRARY``
-#  Path to the GLU library.
-#
-# OSX Specific
-# ^^^^^^^^^^^^
-#
-# On OSX default to using the framework version of OpenGL. People will
-# have to change the cache values of OPENGL_glu_LIBRARY and
-# OPENGL_gl_LIBRARY to use OpenGL with X11 on OSX.
-
-
-#=============================================================================
-# Copyright 2001-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(_OpenGL_REQUIRED_VARS OPENGL_gl_LIBRARY)
-
-if (CYGWIN)
-
-  find_path(OPENGL_INCLUDE_DIR GL/gl.h )
-  list(APPEND _OpenGL_REQUIRED_VARS OPENGL_INCLUDE_DIR)
-
-  find_library(OPENGL_gl_LIBRARY opengl32 )
-
-  find_library(OPENGL_glu_LIBRARY glu32 )
-
-elseif (WIN32)
-
-  if(BORLAND)
-    set (OPENGL_gl_LIBRARY import32 CACHE STRING "OpenGL library for win32")
-    set (OPENGL_glu_LIBRARY import32 CACHE STRING "GLU library for win32")
-  else()
-    set (OPENGL_gl_LIBRARY opengl32 CACHE STRING "OpenGL library for win32")
-    set (OPENGL_glu_LIBRARY glu32 CACHE STRING "GLU library for win32")
-  endif()
-
-elseif (APPLE)
-
-  find_library(OPENGL_gl_LIBRARY OpenGL DOC "OpenGL lib for OSX")
-  find_library(OPENGL_glu_LIBRARY AGL DOC "AGL lib for OSX")
-  find_path(OPENGL_INCLUDE_DIR OpenGL/gl.h DOC "Include for OpenGL on OSX")
-  list(APPEND _OpenGL_REQUIRED_VARS OPENGL_INCLUDE_DIR)
-
-else()
-  if (CMAKE_SYSTEM_NAME MATCHES "HP-UX")
-    # Handle HP-UX cases where we only want to find OpenGL in either hpux64
-    # or hpux32 depending on if we're doing a 64 bit build.
-    if(CMAKE_SIZEOF_VOID_P EQUAL 4)
-      set(_OPENGL_LIB_PATH
-        /opt/graphics/OpenGL/lib/hpux32/)
-    else()
-      set(_OPENGL_LIB_PATH
-        /opt/graphics/OpenGL/lib/hpux64/
-        /opt/graphics/OpenGL/lib/pa20_64)
-    endif()
-  elseif(CMAKE_SYSTEM_NAME STREQUAL Haiku)
-    set(_OPENGL_LIB_PATH
-      /boot/develop/lib/x86)
-    set(_OPENGL_INCLUDE_PATH
-      /boot/develop/headers/os/opengl)
-  endif()
-
-  # The first line below is to make sure that the proper headers
-  # are used on a Linux machine with the NVidia drivers installed.
-  # They replace Mesa with NVidia's own library but normally do not
-  # install headers and that causes the linking to
-  # fail since the compiler finds the Mesa headers but NVidia's library.
-  # Make sure the NVIDIA directory comes BEFORE the others.
-  #  - Atanas Georgiev <atanas@cs.columbia.edu>
-
-  find_path(OPENGL_INCLUDE_DIR GL/gl.h
-    /usr/share/doc/NVIDIA_GLX-1.0/include
-    /usr/openwin/share/include
-    /opt/graphics/OpenGL/include /usr/X11R6/include
-    ${_OPENGL_INCLUDE_PATH}
-  )
-  list(APPEND _OpenGL_REQUIRED_VARS OPENGL_INCLUDE_DIR)
-
-  find_path(OPENGL_xmesa_INCLUDE_DIR GL/xmesa.h
-    /usr/share/doc/NVIDIA_GLX-1.0/include
-    /usr/openwin/share/include
-    /opt/graphics/OpenGL/include /usr/X11R6/include
-  )
-
-  find_library(OPENGL_gl_LIBRARY
-    NAMES GL MesaGL
-    PATHS /opt/graphics/OpenGL/lib
-          /usr/openwin/lib
-          /usr/shlib /usr/X11R6/lib
-          ${_OPENGL_LIB_PATH}
-  )
-
-  unset(_OPENGL_INCLUDE_PATH)
-  unset(_OPENGL_LIB_PATH)
-
-  find_library(OPENGL_glu_LIBRARY
-    NAMES GLU MesaGLU
-    PATHS ${OPENGL_gl_LIBRARY}
-          /opt/graphics/OpenGL/lib
-          /usr/openwin/lib
-          /usr/shlib /usr/X11R6/lib
-  )
-
-endif ()
-
-if(OPENGL_gl_LIBRARY)
-
-    if(OPENGL_xmesa_INCLUDE_DIR)
-      set( OPENGL_XMESA_FOUND "YES" )
-    else()
-      set( OPENGL_XMESA_FOUND "NO" )
-    endif()
-
-    set( OPENGL_LIBRARIES  ${OPENGL_gl_LIBRARY} ${OPENGL_LIBRARIES})
-    if(OPENGL_glu_LIBRARY)
-      set( OPENGL_GLU_FOUND "YES" )
-      set( OPENGL_LIBRARIES ${OPENGL_glu_LIBRARY} ${OPENGL_LIBRARIES} )
-    else()
-      set( OPENGL_GLU_FOUND "NO" )
-    endif()
-
-    # This deprecated setting is for backward compatibility with CMake1.4
-    set (OPENGL_LIBRARY ${OPENGL_LIBRARIES})
-
-endif()
-
-# This deprecated setting is for backward compatibility with CMake1.4
-set(OPENGL_INCLUDE_PATH ${OPENGL_INCLUDE_DIR})
-
-# handle the QUIETLY and REQUIRED arguments and set OPENGL_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(OpenGL REQUIRED_VARS ${_OpenGL_REQUIRED_VARS})
-unset(_OpenGL_REQUIRED_VARS)
-
-mark_as_advanced(
-  OPENGL_INCLUDE_DIR
-  OPENGL_xmesa_INCLUDE_DIR
-  OPENGL_glu_LIBRARY
-  OPENGL_gl_LIBRARY
-)
diff --git a/share/cmake-3.2/Modules/FindOpenMP.cmake b/share/cmake-3.2/Modules/FindOpenMP.cmake
deleted file mode 100644
index a102c66..0000000
--- a/share/cmake-3.2/Modules/FindOpenMP.cmake
+++ /dev/null
@@ -1,239 +0,0 @@
-#.rst:
-# FindOpenMP
-# ----------
-#
-# Finds OpenMP support
-#
-# This module can be used to detect OpenMP support in a compiler.  If
-# the compiler supports OpenMP, the flags required to compile with
-# OpenMP support are returned in variables for the different languages.
-# The variables may be empty if the compiler does not need a special
-# flag to support OpenMP.
-#
-# The following variables are set:
-#
-# ::
-#
-#    OpenMP_C_FLAGS - flags to add to the C compiler for OpenMP support
-#    OpenMP_CXX_FLAGS - flags to add to the CXX compiler for OpenMP support
-#    OpenMP_Fortran_FLAGS - flags to add to the Fortran compiler for OpenMP support
-#    OPENMP_FOUND - true if openmp is detected
-#
-#
-#
-# Supported compilers can be found at
-# http://openmp.org/wp/openmp-compilers/
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-# Copyright 2008-2009 André Rigland Brodtkorb <Andre.Brodtkorb@ifi.uio.no>
-# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
-# Copyright 2014 Nicolas Bock <nicolasbock@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(_OPENMP_REQUIRED_VARS)
-set(CMAKE_REQUIRED_QUIET_SAVE ${CMAKE_REQUIRED_QUIET})
-set(CMAKE_REQUIRED_QUIET ${OpenMP_FIND_QUIETLY})
-
-function(_OPENMP_FLAG_CANDIDATES LANG)
-  set(OpenMP_FLAG_CANDIDATES
-    #Empty, if compiler automatically accepts openmp
-    " "
-    #GNU
-    "-fopenmp"
-    #Microsoft Visual Studio
-    "/openmp"
-    #Intel windows
-    "-Qopenmp"
-    #PathScale, Intel
-    "-openmp"
-    #Sun
-    "-xopenmp"
-    #HP
-    "+Oopenmp"
-    #IBM XL C/c++
-    "-qsmp"
-    #Portland Group, MIPSpro
-    "-mp"
-  )
-
-  set(OMP_FLAG_GNU "-fopenmp")
-  set(OMP_FLAG_HP "+Oopenmp")
-  if(WIN32)
-    set(OMP_FLAG_Intel "-Qopenmp")
-  elseif(CMAKE_${LANG}_COMPILER_ID STREQUAL "Intel" AND
-         "${CMAKE_${LANG}_COMPILER_VERSION}" VERSION_LESS "15.0.0.20140528")
-    set(OMP_FLAG_Intel "-openmp")
-  else()
-    set(OMP_FLAG_Intel "-qopenmp")
-  endif()
-  set(OMP_FLAG_MIPSpro "-mp")
-  set(OMP_FLAG_MSVC "/openmp")
-  set(OMP_FLAG_PathScale "-openmp")
-  set(OMP_FLAG_PGI "-mp")
-  set(OMP_FLAG_SunPro "-xopenmp")
-  set(OMP_FLAG_XL "-qsmp")
-  set(OMP_FLAG_Cray " ")
-
-  # Move the flag that matches the compiler to the head of the list,
-  # this is faster and doesn't clutter the output that much. If that
-  # flag doesn't work we will still try all.
-  if(OMP_FLAG_${CMAKE_${LANG}_COMPILER_ID})
-    list(REMOVE_ITEM OpenMP_FLAG_CANDIDATES "${OMP_FLAG_${CMAKE_${LANG}_COMPILER_ID}}")
-    list(INSERT OpenMP_FLAG_CANDIDATES 0 "${OMP_FLAG_${CMAKE_${LANG}_COMPILER_ID}}")
-  endif()
-
-  set(OpenMP_${LANG}_FLAG_CANDIDATES "${OpenMP_FLAG_CANDIDATES}" PARENT_SCOPE)
-endfunction()
-
-# sample openmp source code to test
-set(OpenMP_C_TEST_SOURCE
-"
-#include <omp.h>
-int main() {
-#ifdef _OPENMP
-  return 0;
-#else
-  breaks_on_purpose
-#endif
-}
-")
-
-# same in Fortran
-set(OpenMP_Fortran_TEST_SOURCE
-  "
-      program test
-      use omp_lib
-      integer :: n
-      n = omp_get_num_threads()
-      end program test
-  "
-  )
-
-# check c compiler
-if(CMAKE_C_COMPILER_LOADED)
-  # if these are set then do not try to find them again,
-  # by avoiding any try_compiles for the flags
-  if(OpenMP_C_FLAGS)
-    unset(OpenMP_C_FLAG_CANDIDATES)
-  else()
-    _OPENMP_FLAG_CANDIDATES("C")
-    include(${CMAKE_CURRENT_LIST_DIR}/CheckCSourceCompiles.cmake)
-  endif()
-
-  foreach(FLAG IN LISTS OpenMP_C_FLAG_CANDIDATES)
-    set(SAFE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
-    set(CMAKE_REQUIRED_FLAGS "${FLAG}")
-    unset(OpenMP_FLAG_DETECTED CACHE)
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Try OpenMP C flag = [${FLAG}]")
-    endif()
-    check_c_source_compiles("${OpenMP_C_TEST_SOURCE}" OpenMP_FLAG_DETECTED)
-    set(CMAKE_REQUIRED_FLAGS "${SAFE_CMAKE_REQUIRED_FLAGS}")
-    if(OpenMP_FLAG_DETECTED)
-      set(OpenMP_C_FLAGS_INTERNAL "${FLAG}")
-      break()
-    endif()
-  endforeach()
-
-  set(OpenMP_C_FLAGS "${OpenMP_C_FLAGS_INTERNAL}"
-    CACHE STRING "C compiler flags for OpenMP parallization")
-
-  list(APPEND _OPENMP_REQUIRED_VARS OpenMP_C_FLAGS)
-  unset(OpenMP_C_FLAG_CANDIDATES)
-endif()
-
-# check cxx compiler
-if(CMAKE_CXX_COMPILER_LOADED)
-  # if these are set then do not try to find them again,
-  # by avoiding any try_compiles for the flags
-  if(OpenMP_CXX_FLAGS)
-    unset(OpenMP_CXX_FLAG_CANDIDATES)
-  else()
-    _OPENMP_FLAG_CANDIDATES("CXX")
-    include(${CMAKE_CURRENT_LIST_DIR}/CheckCXXSourceCompiles.cmake)
-
-    # use the same source for CXX as C for now
-    set(OpenMP_CXX_TEST_SOURCE ${OpenMP_C_TEST_SOURCE})
-  endif()
-
-  foreach(FLAG IN LISTS OpenMP_CXX_FLAG_CANDIDATES)
-    set(SAFE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
-    set(CMAKE_REQUIRED_FLAGS "${FLAG}")
-    unset(OpenMP_FLAG_DETECTED CACHE)
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Try OpenMP CXX flag = [${FLAG}]")
-    endif()
-    check_cxx_source_compiles("${OpenMP_CXX_TEST_SOURCE}" OpenMP_FLAG_DETECTED)
-    set(CMAKE_REQUIRED_FLAGS "${SAFE_CMAKE_REQUIRED_FLAGS}")
-    if(OpenMP_FLAG_DETECTED)
-      set(OpenMP_CXX_FLAGS_INTERNAL "${FLAG}")
-      break()
-    endif()
-  endforeach()
-
-  set(OpenMP_CXX_FLAGS "${OpenMP_CXX_FLAGS_INTERNAL}"
-    CACHE STRING "C++ compiler flags for OpenMP parallization")
-
-  list(APPEND _OPENMP_REQUIRED_VARS OpenMP_CXX_FLAGS)
-  unset(OpenMP_CXX_FLAG_CANDIDATES)
-  unset(OpenMP_CXX_TEST_SOURCE)
-endif()
-
-# check Fortran compiler
-if(CMAKE_Fortran_COMPILER_LOADED)
-  # if these are set then do not try to find them again,
-  # by avoiding any try_compiles for the flags
-  if(OpenMP_Fortran_FLAGS)
-    unset(OpenMP_Fortran_FLAG_CANDIDATES)
-  else()
-    _OPENMP_FLAG_CANDIDATES("Fortran")
-    include(${CMAKE_CURRENT_LIST_DIR}/CheckFortranSourceCompiles.cmake)
-  endif()
-
-  foreach(FLAG IN LISTS OpenMP_Fortran_FLAG_CANDIDATES)
-    set(SAFE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
-    set(CMAKE_REQUIRED_FLAGS "${FLAG}")
-    unset(OpenMP_FLAG_DETECTED CACHE)
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Try OpenMP Fortran flag = [${FLAG}]")
-    endif()
-    check_fortran_source_compiles("${OpenMP_Fortran_TEST_SOURCE}" OpenMP_FLAG_DETECTED)
-    set(CMAKE_REQUIRED_FLAGS "${SAFE_CMAKE_REQUIRED_FLAGS}")
-    if(OpenMP_FLAG_DETECTED)
-      set(OpenMP_Fortran_FLAGS_INTERNAL "${FLAG}")
-      break()
-    endif()
-  endforeach()
-
-  set(OpenMP_Fortran_FLAGS "${OpenMP_Fortran_FLAGS_INTERNAL}"
-    CACHE STRING "Fortran compiler flags for OpenMP parallization")
-
-  list(APPEND _OPENMP_REQUIRED_VARS OpenMP_Fortran_FLAGS)
-  unset(OpenMP_Fortran_FLAG_CANDIDATES)
-  unset(OpenMP_Fortran_TEST_SOURCE)
-endif()
-
-set(CMAKE_REQUIRED_QUIET ${CMAKE_REQUIRED_QUIET_SAVE})
-
-if(_OPENMP_REQUIRED_VARS)
-  include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-  find_package_handle_standard_args(OpenMP
-                                    REQUIRED_VARS ${_OPENMP_REQUIRED_VARS})
-
-  mark_as_advanced(${_OPENMP_REQUIRED_VARS})
-
-  unset(_OPENMP_REQUIRED_VARS)
-else()
-  message(SEND_ERROR "FindOpenMP requires C or CXX language to be enabled")
-endif()
diff --git a/share/cmake-3.2/Modules/FindOpenSSL.cmake b/share/cmake-3.2/Modules/FindOpenSSL.cmake
deleted file mode 100644
index 3adc269..0000000
--- a/share/cmake-3.2/Modules/FindOpenSSL.cmake
+++ /dev/null
@@ -1,340 +0,0 @@
-#.rst:
-# FindOpenSSL
-# -----------
-#
-# Try to find the OpenSSL encryption library
-#
-# Once done this will define
-#
-# ::
-#
-#   OPENSSL_ROOT_DIR - Set this variable to the root installation of OpenSSL
-#
-#
-#
-# Read-Only variables:
-#
-# ::
-#
-#   OPENSSL_FOUND - System has the OpenSSL library
-#   OPENSSL_INCLUDE_DIR - The OpenSSL include directory
-#   OPENSSL_CRYPTO_LIBRARY - The OpenSSL crypto library
-#   OPENSSL_SSL_LIBRARY - The OpenSSL SSL library
-#   OPENSSL_LIBRARIES - All OpenSSL libraries
-#   OPENSSL_VERSION - This is set to $major.$minor.$revision$patch (eg. 0.9.8s)
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
-# Copyright 2009-2011 Mathieu Malaterre <mathieu.malaterre@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if (UNIX)
-  find_package(PkgConfig QUIET)
-  pkg_check_modules(_OPENSSL QUIET openssl)
-endif ()
-
-if (WIN32)
-  # http://www.slproweb.com/products/Win32OpenSSL.html
-  set(_OPENSSL_ROOT_HINTS
-    ${OPENSSL_ROOT_DIR}
-    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (32-bit)_is1;Inno Setup: App Path]"
-    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (64-bit)_is1;Inno Setup: App Path]"
-    ENV OPENSSL_ROOT_DIR
-    )
-  file(TO_CMAKE_PATH "$ENV{PROGRAMFILES}" _programfiles)
-  set(_OPENSSL_ROOT_PATHS
-    "${_programfiles}/OpenSSL"
-    "${_programfiles}/OpenSSL-Win32"
-    "${_programfiles}/OpenSSL-Win64"
-    "C:/OpenSSL/"
-    "C:/OpenSSL-Win32/"
-    "C:/OpenSSL-Win64/"
-    )
-  unset(_programfiles)
-else ()
-  set(_OPENSSL_ROOT_HINTS
-    ${OPENSSL_ROOT_DIR}
-    ENV OPENSSL_ROOT_DIR
-    )
-endif ()
-
-set(_OPENSSL_ROOT_HINTS_AND_PATHS
-    HINTS ${_OPENSSL_ROOT_HINTS}
-    PATHS ${_OPENSSL_ROOT_PATHS}
-    )
-
-find_path(OPENSSL_INCLUDE_DIR
-  NAMES
-    openssl/ssl.h
-  ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-  HINTS
-    ${_OPENSSL_INCLUDEDIR}
-  PATH_SUFFIXES
-    include
-)
-
-if(WIN32 AND NOT CYGWIN)
-  if(MSVC)
-    # /MD and /MDd are the standard values - if someone wants to use
-    # others, the libnames have to change here too
-    # use also ssl and ssleay32 in debug as fallback for openssl < 0.9.8b
-    # TODO: handle /MT and static lib
-    # In Visual C++ naming convention each of these four kinds of Windows libraries has it's standard suffix:
-    #   * MD for dynamic-release
-    #   * MDd for dynamic-debug
-    #   * MT for static-release
-    #   * MTd for static-debug
-
-    # Implementation details:
-    # We are using the libraries located in the VC subdir instead of the parent directory eventhough :
-    # libeay32MD.lib is identical to ../libeay32.lib, and
-    # ssleay32MD.lib is identical to ../ssleay32.lib
-    find_library(LIB_EAY_DEBUG
-      NAMES
-        libeay32MDd
-        libeay32d
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      PATH_SUFFIXES
-        "lib"
-        "VC"
-        "lib/VC"
-    )
-
-    find_library(LIB_EAY_RELEASE
-      NAMES
-        libeay32MD
-        libeay32
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      PATH_SUFFIXES
-        "lib"
-        "VC"
-        "lib/VC"
-    )
-
-    find_library(SSL_EAY_DEBUG
-      NAMES
-        ssleay32MDd
-        ssleay32d
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      PATH_SUFFIXES
-        "lib"
-        "VC"
-        "lib/VC"
-    )
-
-    find_library(SSL_EAY_RELEASE
-      NAMES
-        ssleay32MD
-        ssleay32
-        ssl
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      PATH_SUFFIXES
-        "lib"
-        "VC"
-        "lib/VC"
-    )
-
-    set(LIB_EAY_LIBRARY_DEBUG "${LIB_EAY_DEBUG}")
-    set(LIB_EAY_LIBRARY_RELEASE "${LIB_EAY_RELEASE}")
-    set(SSL_EAY_LIBRARY_DEBUG "${SSL_EAY_DEBUG}")
-    set(SSL_EAY_LIBRARY_RELEASE "${SSL_EAY_RELEASE}")
-
-    include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
-    select_library_configurations(LIB_EAY)
-    select_library_configurations(SSL_EAY)
-
-    mark_as_advanced(LIB_EAY_LIBRARY_DEBUG LIB_EAY_LIBRARY_RELEASE
-                     SSL_EAY_LIBRARY_DEBUG SSL_EAY_LIBRARY_RELEASE)
-    set( OPENSSL_SSL_LIBRARY ${SSL_EAY_LIBRARY} )
-    set( OPENSSL_CRYPTO_LIBRARY ${LIB_EAY_LIBRARY} )
-    set( OPENSSL_LIBRARIES ${SSL_EAY_LIBRARY} ${LIB_EAY_LIBRARY} )
-  elseif(MINGW)
-    # same player, for MinGW
-    set(LIB_EAY_NAMES libeay32)
-    set(SSL_EAY_NAMES ssleay32)
-    if(CMAKE_CROSSCOMPILING)
-      list(APPEND LIB_EAY_NAMES crypto)
-      list(APPEND SSL_EAY_NAMES ssl)
-    endif()
-    find_library(LIB_EAY
-      NAMES
-        ${LIB_EAY_NAMES}
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      PATH_SUFFIXES
-        "lib"
-        "lib/MinGW"
-    )
-
-    find_library(SSL_EAY
-      NAMES
-        ${SSL_EAY_NAMES}
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      PATH_SUFFIXES
-        "lib"
-        "lib/MinGW"
-    )
-
-    mark_as_advanced(SSL_EAY LIB_EAY)
-    set( OPENSSL_SSL_LIBRARY ${SSL_EAY} )
-    set( OPENSSL_CRYPTO_LIBRARY ${LIB_EAY} )
-    set( OPENSSL_LIBRARIES ${SSL_EAY} ${LIB_EAY} )
-    unset(LIB_EAY_NAMES)
-    unset(SSL_EAY_NAMES)
-  else()
-    # Not sure what to pick for -say- intel, let's use the toplevel ones and hope someone report issues:
-    find_library(LIB_EAY
-      NAMES
-        libeay32
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      HINTS
-        ${_OPENSSL_LIBDIR}
-      PATH_SUFFIXES
-        lib
-    )
-
-    find_library(SSL_EAY
-      NAMES
-        ssleay32
-      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-      HINTS
-        ${_OPENSSL_LIBDIR}
-      PATH_SUFFIXES
-        lib
-    )
-
-    mark_as_advanced(SSL_EAY LIB_EAY)
-    set( OPENSSL_SSL_LIBRARY ${SSL_EAY} )
-    set( OPENSSL_CRYPTO_LIBRARY ${LIB_EAY} )
-    set( OPENSSL_LIBRARIES ${SSL_EAY} ${LIB_EAY} )
-  endif()
-else()
-
-  find_library(OPENSSL_SSL_LIBRARY
-    NAMES
-      ssl
-      ssleay32
-      ssleay32MD
-    ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-    HINTS
-      ${_OPENSSL_LIBDIR}
-    PATH_SUFFIXES
-      lib
-  )
-
-  find_library(OPENSSL_CRYPTO_LIBRARY
-    NAMES
-      crypto
-    ${_OPENSSL_ROOT_HINTS_AND_PATHS}
-    HINTS
-      ${_OPENSSL_LIBDIR}
-    PATH_SUFFIXES
-      lib
-  )
-
-  mark_as_advanced(OPENSSL_CRYPTO_LIBRARY OPENSSL_SSL_LIBRARY)
-
-  # compat defines
-  set(OPENSSL_SSL_LIBRARIES ${OPENSSL_SSL_LIBRARY})
-  set(OPENSSL_CRYPTO_LIBRARIES ${OPENSSL_CRYPTO_LIBRARY})
-
-  set(OPENSSL_LIBRARIES ${OPENSSL_SSL_LIBRARY} ${OPENSSL_CRYPTO_LIBRARY})
-
-endif()
-
-function(from_hex HEX DEC)
-  string(TOUPPER "${HEX}" HEX)
-  set(_res 0)
-  string(LENGTH "${HEX}" _strlen)
-
-  while (_strlen GREATER 0)
-    math(EXPR _res "${_res} * 16")
-    string(SUBSTRING "${HEX}" 0 1 NIBBLE)
-    string(SUBSTRING "${HEX}" 1 -1 HEX)
-    if (NIBBLE STREQUAL "A")
-      math(EXPR _res "${_res} + 10")
-    elseif (NIBBLE STREQUAL "B")
-      math(EXPR _res "${_res} + 11")
-    elseif (NIBBLE STREQUAL "C")
-      math(EXPR _res "${_res} + 12")
-    elseif (NIBBLE STREQUAL "D")
-      math(EXPR _res "${_res} + 13")
-    elseif (NIBBLE STREQUAL "E")
-      math(EXPR _res "${_res} + 14")
-    elseif (NIBBLE STREQUAL "F")
-      math(EXPR _res "${_res} + 15")
-    else()
-      math(EXPR _res "${_res} + ${NIBBLE}")
-    endif()
-
-    string(LENGTH "${HEX}" _strlen)
-  endwhile()
-
-  set(${DEC} ${_res} PARENT_SCOPE)
-endfunction()
-
-if (OPENSSL_INCLUDE_DIR)
-  if(OPENSSL_INCLUDE_DIR AND EXISTS "${OPENSSL_INCLUDE_DIR}/openssl/opensslv.h")
-    file(STRINGS "${OPENSSL_INCLUDE_DIR}/openssl/opensslv.h" openssl_version_str
-         REGEX "^# *define[\t ]+OPENSSL_VERSION_NUMBER[\t ]+0x([0-9a-fA-F])+.*")
-
-    # The version number is encoded as 0xMNNFFPPS: major minor fix patch status
-    # The status gives if this is a developer or prerelease and is ignored here.
-    # Major, minor, and fix directly translate into the version numbers shown in
-    # the string. The patch field translates to the single character suffix that
-    # indicates the bug fix state, which 00 -> nothing, 01 -> a, 02 -> b and so
-    # on.
-
-    string(REGEX REPLACE "^.*OPENSSL_VERSION_NUMBER[\t ]+0x([0-9a-fA-F])([0-9a-fA-F][0-9a-fA-F])([0-9a-fA-F][0-9a-fA-F])([0-9a-fA-F][0-9a-fA-F])([0-9a-fA-F]).*$"
-           "\\1;\\2;\\3;\\4;\\5" OPENSSL_VERSION_LIST "${openssl_version_str}")
-    list(GET OPENSSL_VERSION_LIST 0 OPENSSL_VERSION_MAJOR)
-    list(GET OPENSSL_VERSION_LIST 1 OPENSSL_VERSION_MINOR)
-    from_hex("${OPENSSL_VERSION_MINOR}" OPENSSL_VERSION_MINOR)
-    list(GET OPENSSL_VERSION_LIST 2 OPENSSL_VERSION_FIX)
-    from_hex("${OPENSSL_VERSION_FIX}" OPENSSL_VERSION_FIX)
-    list(GET OPENSSL_VERSION_LIST 3 OPENSSL_VERSION_PATCH)
-
-    if (NOT OPENSSL_VERSION_PATCH STREQUAL "00")
-      from_hex("${OPENSSL_VERSION_PATCH}" _tmp)
-      # 96 is the ASCII code of 'a' minus 1
-      math(EXPR OPENSSL_VERSION_PATCH_ASCII "${_tmp} + 96")
-      unset(_tmp)
-      # Once anyone knows how OpenSSL would call the patch versions beyond 'z'
-      # this should be updated to handle that, too. This has not happened yet
-      # so it is simply ignored here for now.
-      string(ASCII "${OPENSSL_VERSION_PATCH_ASCII}" OPENSSL_VERSION_PATCH_STRING)
-    endif ()
-
-    set(OPENSSL_VERSION "${OPENSSL_VERSION_MAJOR}.${OPENSSL_VERSION_MINOR}.${OPENSSL_VERSION_FIX}${OPENSSL_VERSION_PATCH_STRING}")
-  endif ()
-endif ()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-if (OPENSSL_VERSION)
-  find_package_handle_standard_args(OpenSSL
-    REQUIRED_VARS
-      OPENSSL_LIBRARIES
-      OPENSSL_INCLUDE_DIR
-    VERSION_VAR
-      OPENSSL_VERSION
-    FAIL_MESSAGE
-      "Could NOT find OpenSSL, try to set the path to OpenSSL root folder in the system variable OPENSSL_ROOT_DIR"
-  )
-else ()
-  find_package_handle_standard_args(OpenSSL "Could NOT find OpenSSL, try to set the path to OpenSSL root folder in the system variable OPENSSL_ROOT_DIR"
-    OPENSSL_LIBRARIES
-    OPENSSL_INCLUDE_DIR
-  )
-endif ()
-
-mark_as_advanced(OPENSSL_INCLUDE_DIR OPENSSL_LIBRARIES)
diff --git a/share/cmake-3.2/Modules/FindPNG.cmake b/share/cmake-3.2/Modules/FindPNG.cmake
deleted file mode 100644
index 7cf3f22..0000000
--- a/share/cmake-3.2/Modules/FindPNG.cmake
+++ /dev/null
@@ -1,125 +0,0 @@
-#.rst:
-# FindPNG
-# -------
-#
-# Find the native PNG includes and library
-#
-#
-#
-# This module searches libpng, the library for working with PNG images.
-#
-# It defines the following variables
-#
-# ``PNG_INCLUDE_DIRS``
-#   where to find png.h, etc.
-# ``PNG_LIBRARIES``
-#   the libraries to link against to use PNG.
-# ``PNG_DEFINITIONS``
-#   You should add_definitons(${PNG_DEFINITIONS}) before compiling code
-#   that includes png library files.
-# ``PNG_FOUND``
-#   If false, do not try to use PNG.
-# ``PNG_VERSION_STRING``
-#   the version of the PNG library found (since CMake 2.8.8)
-#
-# Also defined, but not for general use are
-#
-# ``PNG_LIBRARY``
-#   where to find the PNG library.
-#
-# For backward compatiblity the variable PNG_INCLUDE_DIR is also set.
-# It has the same value as PNG_INCLUDE_DIRS.
-#
-# Since PNG depends on the ZLib compression library, none of the above
-# will be defined unless ZLib can be found.
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(PNG_FIND_QUIETLY)
-  set(_FIND_ZLIB_ARG QUIET)
-endif()
-find_package(ZLIB ${_FIND_ZLIB_ARG})
-
-if(ZLIB_FOUND)
-  find_path(PNG_PNG_INCLUDE_DIR png.h
-  /usr/local/include/libpng             # OpenBSD
-  )
-
-  list(APPEND PNG_NAMES png libpng)
-  unset(PNG_NAMES_DEBUG)
-  set(_PNG_VERSION_SUFFIXES 17 16 15 14 12)
-  if (PNG_FIND_VERSION MATCHES "^([0-9]+)\\.([0-9]+)(\\..*)?$")
-    set(_PNG_VERSION_SUFFIX_MIN "${CMAKE_MATCH_1}${CMAKE_MATCH_2}")
-    if (PNG_FIND_VERSION_EXACT)
-      set(_PNG_VERSION_SUFFIXES ${_PNG_VERSION_SUFFIX_MIN})
-    else ()
-      string(REGEX REPLACE
-          "${_PNG_VERSION_SUFFIX_MIN}.*" "${_PNG_VERSION_SUFFIX_MIN}"
-          _PNG_VERSION_SUFFIXES "${_PNG_VERSION_SUFFIXES}")
-    endif ()
-    unset(_PNG_VERSION_SUFFIX_MIN)
-  endif ()
-  foreach(v IN LISTS _PNG_VERSION_SUFFIXES)
-    list(APPEND PNG_NAMES png${v} libpng${v})
-    list(APPEND PNG_NAMES_DEBUG png${v}d libpng${v}d)
-  endforeach()
-  unset(_PNG_VERSION_SUFFIXES)
-  # For compatiblity with versions prior to this multi-config search, honor
-  # any PNG_LIBRARY that is already specified and skip the search.
-  if(NOT PNG_LIBRARY)
-    find_library(PNG_LIBRARY_RELEASE NAMES ${PNG_NAMES})
-    find_library(PNG_LIBRARY_DEBUG NAMES ${PNG_NAMES_DEBUG})
-    include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
-    select_library_configurations(PNG)
-    mark_as_advanced(PNG_LIBRARY_RELEASE PNG_LIBRARY_DEBUG)
-  endif()
-  unset(PNG_NAMES)
-  unset(PNG_NAMES_DEBUG)
-
-  # Set by select_library_configurations(), but we want the one from
-  # find_package_handle_standard_args() below.
-  unset(PNG_FOUND)
-
-  if (PNG_LIBRARY AND PNG_PNG_INCLUDE_DIR)
-      # png.h includes zlib.h. Sigh.
-      set(PNG_INCLUDE_DIRS ${PNG_PNG_INCLUDE_DIR} ${ZLIB_INCLUDE_DIR} )
-      set(PNG_INCLUDE_DIR ${PNG_INCLUDE_DIRS} ) # for backward compatiblity
-      set(PNG_LIBRARIES ${PNG_LIBRARY} ${ZLIB_LIBRARY})
-
-      if (CYGWIN)
-        if(BUILD_SHARED_LIBS)
-           # No need to define PNG_USE_DLL here, because it's default for Cygwin.
-        else()
-          set (PNG_DEFINITIONS -DPNG_STATIC)
-        endif()
-      endif ()
-
-  endif ()
-
-  if (PNG_PNG_INCLUDE_DIR AND EXISTS "${PNG_PNG_INCLUDE_DIR}/png.h")
-      file(STRINGS "${PNG_PNG_INCLUDE_DIR}/png.h" png_version_str REGEX "^#define[ \t]+PNG_LIBPNG_VER_STRING[ \t]+\".+\"")
-
-      string(REGEX REPLACE "^#define[ \t]+PNG_LIBPNG_VER_STRING[ \t]+\"([^\"]+)\".*" "\\1" PNG_VERSION_STRING "${png_version_str}")
-      unset(png_version_str)
-  endif ()
-endif()
-
-# handle the QUIETLY and REQUIRED arguments and set PNG_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(PNG
-                                  REQUIRED_VARS PNG_LIBRARY PNG_PNG_INCLUDE_DIR
-                                  VERSION_VAR PNG_VERSION_STRING)
-
-mark_as_advanced(PNG_PNG_INCLUDE_DIR PNG_LIBRARY )
diff --git a/share/cmake-3.2/Modules/FindPackageHandleStandardArgs.cmake b/share/cmake-3.2/Modules/FindPackageHandleStandardArgs.cmake
deleted file mode 100644
index 2de1fb3..0000000
--- a/share/cmake-3.2/Modules/FindPackageHandleStandardArgs.cmake
+++ /dev/null
@@ -1,382 +0,0 @@
-#.rst:
-# FindPackageHandleStandardArgs
-# -----------------------------
-#
-#
-#
-# FIND_PACKAGE_HANDLE_STANDARD_ARGS(<name> ...  )
-#
-# This function is intended to be used in FindXXX.cmake modules files.
-# It handles the REQUIRED, QUIET and version-related arguments to
-# find_package().  It also sets the <packagename>_FOUND variable.  The
-# package is considered found if all variables <var1>...  listed contain
-# valid results, e.g.  valid filepaths.
-#
-# There are two modes of this function.  The first argument in both
-# modes is the name of the Find-module where it is called (in original
-# casing).
-#
-# The first simple mode looks like this:
-#
-# ::
-#
-#     FIND_PACKAGE_HANDLE_STANDARD_ARGS(<name>
-#       (DEFAULT_MSG|"Custom failure message") <var1>...<varN> )
-#
-# If the variables <var1> to <varN> are all valid, then
-# <UPPERCASED_NAME>_FOUND will be set to TRUE.  If DEFAULT_MSG is given
-# as second argument, then the function will generate itself useful
-# success and error messages.  You can also supply a custom error
-# message for the failure case.  This is not recommended.
-#
-# The second mode is more powerful and also supports version checking:
-#
-# ::
-#
-#     FIND_PACKAGE_HANDLE_STANDARD_ARGS(NAME
-#       [FOUND_VAR <resultVar>]
-#       [REQUIRED_VARS <var1>...<varN>]
-#       [VERSION_VAR   <versionvar>]
-#       [HANDLE_COMPONENTS]
-#       [CONFIG_MODE]
-#       [FAIL_MESSAGE "Custom failure message"] )
-#
-# In this mode, the name of the result-variable can be set either to
-# either <UPPERCASED_NAME>_FOUND or <OriginalCase_Name>_FOUND using the
-# FOUND_VAR option.  Other names for the result-variable are not
-# allowed.  So for a Find-module named FindFooBar.cmake, the two
-# possible names are FooBar_FOUND and FOOBAR_FOUND.  It is recommended
-# to use the original case version.  If the FOUND_VAR option is not
-# used, the default is <UPPERCASED_NAME>_FOUND.
-#
-# As in the simple mode, if <var1> through <varN> are all valid,
-# <packagename>_FOUND will be set to TRUE.  After REQUIRED_VARS the
-# variables which are required for this package are listed.  Following
-# VERSION_VAR the name of the variable can be specified which holds the
-# version of the package which has been found.  If this is done, this
-# version will be checked against the (potentially) specified required
-# version used in the find_package() call.  The EXACT keyword is also
-# handled.  The default messages include information about the required
-# version and the version which has been actually found, both if the
-# version is ok or not.  If the package supports components, use the
-# HANDLE_COMPONENTS option to enable handling them.  In this case,
-# find_package_handle_standard_args() will report which components have
-# been found and which are missing, and the <packagename>_FOUND variable
-# will be set to FALSE if any of the required components (i.e.  not the
-# ones listed after OPTIONAL_COMPONENTS) are missing.  Use the option
-# CONFIG_MODE if your FindXXX.cmake module is a wrapper for a
-# find_package(...  NO_MODULE) call.  In this case VERSION_VAR will be
-# set to <NAME>_VERSION and the macro will automatically check whether
-# the Config module was found.  Via FAIL_MESSAGE a custom failure
-# message can be specified, if this is not used, the default message
-# will be displayed.
-#
-# Example for mode 1:
-#
-# ::
-#
-#     find_package_handle_standard_args(LibXml2  DEFAULT_MSG
-#       LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
-#
-#
-#
-# LibXml2 is considered to be found, if both LIBXML2_LIBRARY and
-# LIBXML2_INCLUDE_DIR are valid.  Then also LIBXML2_FOUND is set to
-# TRUE.  If it is not found and REQUIRED was used, it fails with
-# FATAL_ERROR, independent whether QUIET was used or not.  If it is
-# found, success will be reported, including the content of <var1>.  On
-# repeated Cmake runs, the same message won't be printed again.
-#
-# Example for mode 2:
-#
-# ::
-#
-#     find_package_handle_standard_args(LibXslt
-#       FOUND_VAR LibXslt_FOUND
-#       REQUIRED_VARS LibXslt_LIBRARIES LibXslt_INCLUDE_DIRS
-#       VERSION_VAR LibXslt_VERSION_STRING)
-#
-# In this case, LibXslt is considered to be found if the variable(s)
-# listed after REQUIRED_VAR are all valid, i.e.  LibXslt_LIBRARIES and
-# LibXslt_INCLUDE_DIRS in this case.  The result will then be stored in
-# LibXslt_FOUND .  Also the version of LibXslt will be checked by using
-# the version contained in LibXslt_VERSION_STRING.  Since no
-# FAIL_MESSAGE is given, the default messages will be printed.
-#
-# Another example for mode 2:
-#
-# ::
-#
-#     find_package(Automoc4 QUIET NO_MODULE HINTS /opt/automoc4)
-#     find_package_handle_standard_args(Automoc4  CONFIG_MODE)
-#
-# In this case, FindAutmoc4.cmake wraps a call to find_package(Automoc4
-# NO_MODULE) and adds an additional search directory for automoc4.  Here
-# the result will be stored in AUTOMOC4_FOUND.  The following
-# FIND_PACKAGE_HANDLE_STANDARD_ARGS() call produces a proper
-# success/error message.
-
-#=============================================================================
-# Copyright 2007-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageMessage.cmake)
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
-
-# internal helper macro
-macro(_FPHSA_FAILURE_MESSAGE _msg)
-  if (${_NAME}_FIND_REQUIRED)
-    message(FATAL_ERROR "${_msg}")
-  else ()
-    if (NOT ${_NAME}_FIND_QUIETLY)
-      message(STATUS "${_msg}")
-    endif ()
-  endif ()
-endmacro()
-
-
-# internal helper macro to generate the failure message when used in CONFIG_MODE:
-macro(_FPHSA_HANDLE_FAILURE_CONFIG_MODE)
-  # <name>_CONFIG is set, but FOUND is false, this means that some other of the REQUIRED_VARS was not found:
-  if(${_NAME}_CONFIG)
-    _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: missing: ${MISSING_VARS} (found ${${_NAME}_CONFIG} ${VERSION_MSG})")
-  else()
-    # If _CONSIDERED_CONFIGS is set, the config-file has been found, but no suitable version.
-    # List them all in the error message:
-    if(${_NAME}_CONSIDERED_CONFIGS)
-      set(configsText "")
-      list(LENGTH ${_NAME}_CONSIDERED_CONFIGS configsCount)
-      math(EXPR configsCount "${configsCount} - 1")
-      foreach(currentConfigIndex RANGE ${configsCount})
-        list(GET ${_NAME}_CONSIDERED_CONFIGS ${currentConfigIndex} filename)
-        list(GET ${_NAME}_CONSIDERED_VERSIONS ${currentConfigIndex} version)
-        set(configsText "${configsText}    ${filename} (version ${version})\n")
-      endforeach()
-      if (${_NAME}_NOT_FOUND_MESSAGE)
-        set(configsText "${configsText}    Reason given by package: ${${_NAME}_NOT_FOUND_MESSAGE}\n")
-      endif()
-      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} ${VERSION_MSG}, checked the following files:\n${configsText}")
-
-    else()
-      # Simple case: No Config-file was found at all:
-      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: found neither ${_NAME}Config.cmake nor ${_NAME_LOWER}-config.cmake ${VERSION_MSG}")
-    endif()
-  endif()
-endmacro()
-
-
-function(FIND_PACKAGE_HANDLE_STANDARD_ARGS _NAME _FIRST_ARG)
-
-# set up the arguments for CMAKE_PARSE_ARGUMENTS and check whether we are in
-# new extended or in the "old" mode:
-  set(options  CONFIG_MODE  HANDLE_COMPONENTS)
-  set(oneValueArgs  FAIL_MESSAGE  VERSION_VAR  FOUND_VAR)
-  set(multiValueArgs REQUIRED_VARS)
-  set(_KEYWORDS_FOR_EXTENDED_MODE  ${options} ${oneValueArgs} ${multiValueArgs} )
-  list(FIND _KEYWORDS_FOR_EXTENDED_MODE "${_FIRST_ARG}" INDEX)
-
-  if(${INDEX} EQUAL -1)
-    set(FPHSA_FAIL_MESSAGE ${_FIRST_ARG})
-    set(FPHSA_REQUIRED_VARS ${ARGN})
-    set(FPHSA_VERSION_VAR)
-  else()
-
-    CMAKE_PARSE_ARGUMENTS(FPHSA "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${_FIRST_ARG} ${ARGN})
-
-    if(FPHSA_UNPARSED_ARGUMENTS)
-      message(FATAL_ERROR "Unknown keywords given to FIND_PACKAGE_HANDLE_STANDARD_ARGS(): \"${FPHSA_UNPARSED_ARGUMENTS}\"")
-    endif()
-
-    if(NOT FPHSA_FAIL_MESSAGE)
-      set(FPHSA_FAIL_MESSAGE  "DEFAULT_MSG")
-    endif()
-  endif()
-
-# now that we collected all arguments, process them
-
-  if("x${FPHSA_FAIL_MESSAGE}" STREQUAL "xDEFAULT_MSG")
-    set(FPHSA_FAIL_MESSAGE "Could NOT find ${_NAME}")
-  endif()
-
-  # In config-mode, we rely on the variable <package>_CONFIG, which is set by find_package()
-  # when it successfully found the config-file, including version checking:
-  if(FPHSA_CONFIG_MODE)
-    list(INSERT FPHSA_REQUIRED_VARS 0 ${_NAME}_CONFIG)
-    list(REMOVE_DUPLICATES FPHSA_REQUIRED_VARS)
-    set(FPHSA_VERSION_VAR ${_NAME}_VERSION)
-  endif()
-
-  if(NOT FPHSA_REQUIRED_VARS)
-    message(FATAL_ERROR "No REQUIRED_VARS specified for FIND_PACKAGE_HANDLE_STANDARD_ARGS()")
-  endif()
-
-  list(GET FPHSA_REQUIRED_VARS 0 _FIRST_REQUIRED_VAR)
-
-  string(TOUPPER ${_NAME} _NAME_UPPER)
-  string(TOLOWER ${_NAME} _NAME_LOWER)
-
-  if(FPHSA_FOUND_VAR)
-    if(FPHSA_FOUND_VAR MATCHES "^${_NAME}_FOUND$"  OR  FPHSA_FOUND_VAR MATCHES "^${_NAME_UPPER}_FOUND$")
-      set(_FOUND_VAR ${FPHSA_FOUND_VAR})
-    else()
-      message(FATAL_ERROR "The argument for FOUND_VAR is \"${FPHSA_FOUND_VAR}\", but only \"${_NAME}_FOUND\" and \"${_NAME_UPPER}_FOUND\" are valid names.")
-    endif()
-  else()
-    set(_FOUND_VAR ${_NAME_UPPER}_FOUND)
-  endif()
-
-  # collect all variables which were not found, so they can be printed, so the
-  # user knows better what went wrong (#6375)
-  set(MISSING_VARS "")
-  set(DETAILS "")
-  # check if all passed variables are valid
-  unset(${_FOUND_VAR})
-  foreach(_CURRENT_VAR ${FPHSA_REQUIRED_VARS})
-    if(NOT ${_CURRENT_VAR})
-      set(${_FOUND_VAR} FALSE)
-      set(MISSING_VARS "${MISSING_VARS} ${_CURRENT_VAR}")
-    else()
-      set(DETAILS "${DETAILS}[${${_CURRENT_VAR}}]")
-    endif()
-  endforeach()
-  if(NOT "${${_FOUND_VAR}}" STREQUAL "FALSE")
-    set(${_FOUND_VAR} TRUE)
-  endif()
-
-  # component handling
-  unset(FOUND_COMPONENTS_MSG)
-  unset(MISSING_COMPONENTS_MSG)
-
-  if(FPHSA_HANDLE_COMPONENTS)
-    foreach(comp ${${_NAME}_FIND_COMPONENTS})
-      if(${_NAME}_${comp}_FOUND)
-
-        if(NOT DEFINED FOUND_COMPONENTS_MSG)
-          set(FOUND_COMPONENTS_MSG "found components: ")
-        endif()
-        set(FOUND_COMPONENTS_MSG "${FOUND_COMPONENTS_MSG} ${comp}")
-
-      else()
-
-        if(NOT DEFINED MISSING_COMPONENTS_MSG)
-          set(MISSING_COMPONENTS_MSG "missing components: ")
-        endif()
-        set(MISSING_COMPONENTS_MSG "${MISSING_COMPONENTS_MSG} ${comp}")
-
-        if(${_NAME}_FIND_REQUIRED_${comp})
-          set(${_FOUND_VAR} FALSE)
-          set(MISSING_VARS "${MISSING_VARS} ${comp}")
-        endif()
-
-      endif()
-    endforeach()
-    set(COMPONENT_MSG "${FOUND_COMPONENTS_MSG} ${MISSING_COMPONENTS_MSG}")
-    set(DETAILS "${DETAILS}[c${COMPONENT_MSG}]")
-  endif()
-
-  # version handling:
-  set(VERSION_MSG "")
-  set(VERSION_OK TRUE)
-  set(VERSION ${${FPHSA_VERSION_VAR}})
-
-  # check with DEFINED here as the requested or found version may be "0"
-  if (DEFINED ${_NAME}_FIND_VERSION)
-    if(DEFINED ${FPHSA_VERSION_VAR})
-
-      if(${_NAME}_FIND_VERSION_EXACT)       # exact version required
-        # count the dots in the version string
-        string(REGEX REPLACE "[^.]" "" _VERSION_DOTS "${VERSION}")
-        # add one dot because there is one dot more than there are components
-        string(LENGTH "${_VERSION_DOTS}." _VERSION_DOTS)
-        if (_VERSION_DOTS GREATER ${_NAME}_FIND_VERSION_COUNT)
-          # Because of the C++ implementation of find_package() ${_NAME}_FIND_VERSION_COUNT
-          # is at most 4 here. Therefore a simple lookup table is used.
-          if (${_NAME}_FIND_VERSION_COUNT EQUAL 1)
-            set(_VERSION_REGEX "[^.]*")
-          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 2)
-            set(_VERSION_REGEX "[^.]*\\.[^.]*")
-          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 3)
-            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*")
-          else ()
-            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*\\.[^.]*")
-          endif ()
-          string(REGEX REPLACE "^(${_VERSION_REGEX})\\..*" "\\1" _VERSION_HEAD "${VERSION}")
-          unset(_VERSION_REGEX)
-          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL _VERSION_HEAD)
-            set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
-            set(VERSION_OK FALSE)
-          else ()
-            set(VERSION_MSG "(found suitable exact version \"${VERSION}\")")
-          endif ()
-          unset(_VERSION_HEAD)
-        else ()
-          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL VERSION)
-            set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
-            set(VERSION_OK FALSE)
-          else ()
-            set(VERSION_MSG "(found suitable exact version \"${VERSION}\")")
-          endif ()
-        endif ()
-        unset(_VERSION_DOTS)
-
-      else()     # minimum version specified:
-        if (${_NAME}_FIND_VERSION VERSION_GREATER VERSION)
-          set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is at least \"${${_NAME}_FIND_VERSION}\"")
-          set(VERSION_OK FALSE)
-        else ()
-          set(VERSION_MSG "(found suitable version \"${VERSION}\", minimum required is \"${${_NAME}_FIND_VERSION}\")")
-        endif ()
-      endif()
-
-    else()
-
-      # if the package was not found, but a version was given, add that to the output:
-      if(${_NAME}_FIND_VERSION_EXACT)
-         set(VERSION_MSG "(Required is exact version \"${${_NAME}_FIND_VERSION}\")")
-      else()
-         set(VERSION_MSG "(Required is at least version \"${${_NAME}_FIND_VERSION}\")")
-      endif()
-
-    endif()
-  else ()
-    if(VERSION)
-      set(VERSION_MSG "(found version \"${VERSION}\")")
-    endif()
-  endif ()
-
-  if(VERSION_OK)
-    set(DETAILS "${DETAILS}[v${VERSION}(${${_NAME}_FIND_VERSION})]")
-  else()
-    set(${_FOUND_VAR} FALSE)
-  endif()
-
-
-  # print the result:
-  if (${_FOUND_VAR})
-    FIND_PACKAGE_MESSAGE(${_NAME} "Found ${_NAME}: ${${_FIRST_REQUIRED_VAR}} ${VERSION_MSG} ${COMPONENT_MSG}" "${DETAILS}")
-  else ()
-
-    if(FPHSA_CONFIG_MODE)
-      _FPHSA_HANDLE_FAILURE_CONFIG_MODE()
-    else()
-      if(NOT VERSION_OK)
-        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: ${VERSION_MSG} (found ${${_FIRST_REQUIRED_VAR}})")
-      else()
-        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} (missing: ${MISSING_VARS}) ${VERSION_MSG}")
-      endif()
-    endif()
-
-  endif ()
-
-  set(${_FOUND_VAR} ${${_FOUND_VAR}} PARENT_SCOPE)
-
-endfunction()
diff --git a/share/cmake-3.2/Modules/FindPkgConfig.cmake b/share/cmake-3.2/Modules/FindPkgConfig.cmake
deleted file mode 100644
index bf58ede..0000000
--- a/share/cmake-3.2/Modules/FindPkgConfig.cmake
+++ /dev/null
@@ -1,578 +0,0 @@
-#.rst:
-# FindPkgConfig
-# -------------
-#
-# A `pkg-config` module for CMake.
-#
-# Finds the ``pkg-config`` executable and add the
-# :command:`pkg_check_modules` and :command:`pkg_search_module`
-# commands.
-#
-# In order to find the ``pkg-config`` executable, it uses the
-# :variable:`PKG_CONFIG_EXECUTABLE` variable or the ``PKG_CONFIG``
-# environment variable first.
-
-#=============================================================================
-# Copyright 2006-2014 Kitware, Inc.
-# Copyright 2014      Christoph Grüninger <foss@grueninger.de>
-# Copyright 2006      Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-### Common stuff ####
-set(PKG_CONFIG_VERSION 1)
-
-# find pkg-config, use PKG_CONFIG if set
-if((NOT PKG_CONFIG_EXECUTABLE) AND (NOT "$ENV{PKG_CONFIG}" STREQUAL ""))
-  set(PKG_CONFIG_EXECUTABLE "$ENV{PKG_CONFIG}" CACHE FILEPATH "pkg-config executable")
-endif()
-find_program(PKG_CONFIG_EXECUTABLE NAMES pkg-config DOC "pkg-config executable")
-mark_as_advanced(PKG_CONFIG_EXECUTABLE)
-
-if (PKG_CONFIG_EXECUTABLE)
-  execute_process(COMMAND ${PKG_CONFIG_EXECUTABLE} --version
-    OUTPUT_VARIABLE PKG_CONFIG_VERSION_STRING
-    ERROR_QUIET
-    OUTPUT_STRIP_TRAILING_WHITESPACE)
-endif ()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(PkgConfig
-                                  REQUIRED_VARS PKG_CONFIG_EXECUTABLE
-                                  VERSION_VAR PKG_CONFIG_VERSION_STRING)
-
-# This is needed because the module name is "PkgConfig" but the name of
-# this variable has always been PKG_CONFIG_FOUND so this isn't automatically
-# handled by FPHSA.
-set(PKG_CONFIG_FOUND "${PKGCONFIG_FOUND}")
-
-# Unsets the given variables
-macro(_pkgconfig_unset var)
-  set(${var} "" CACHE INTERNAL "")
-endmacro()
-
-macro(_pkgconfig_set var value)
-  set(${var} ${value} CACHE INTERNAL "")
-endmacro()
-
-# Invokes pkgconfig, cleans up the result and sets variables
-macro(_pkgconfig_invoke _pkglist _prefix _varname _regexp)
-  set(_pkgconfig_invoke_result)
-
-  execute_process(
-    COMMAND ${PKG_CONFIG_EXECUTABLE} ${ARGN} ${_pkglist}
-    OUTPUT_VARIABLE _pkgconfig_invoke_result
-    RESULT_VARIABLE _pkgconfig_failed)
-
-  if (_pkgconfig_failed)
-    set(_pkgconfig_${_varname} "")
-    _pkgconfig_unset(${_prefix}_${_varname})
-  else()
-    string(REGEX REPLACE "[\r\n]"                  " " _pkgconfig_invoke_result "${_pkgconfig_invoke_result}")
-    string(REGEX REPLACE " +$"                     ""  _pkgconfig_invoke_result "${_pkgconfig_invoke_result}")
-
-    if (NOT ${_regexp} STREQUAL "")
-      string(REGEX REPLACE "${_regexp}" " " _pkgconfig_invoke_result "${_pkgconfig_invoke_result}")
-    endif()
-
-    separate_arguments(_pkgconfig_invoke_result)
-
-    #message(STATUS "  ${_varname} ... ${_pkgconfig_invoke_result}")
-    set(_pkgconfig_${_varname} ${_pkgconfig_invoke_result})
-    _pkgconfig_set(${_prefix}_${_varname} "${_pkgconfig_invoke_result}")
-  endif()
-endmacro()
-
-# Invokes pkgconfig two times; once without '--static' and once with
-# '--static'
-macro(_pkgconfig_invoke_dyn _pkglist _prefix _varname cleanup_regexp)
-  _pkgconfig_invoke("${_pkglist}" ${_prefix}        ${_varname} "${cleanup_regexp}" ${ARGN})
-  _pkgconfig_invoke("${_pkglist}" ${_prefix} STATIC_${_varname} "${cleanup_regexp}" --static  ${ARGN})
-endmacro()
-
-# Splits given arguments into options and a package list
-macro(_pkgconfig_parse_options _result _is_req _is_silent _no_cmake_path _no_cmake_environment_path)
-  set(${_is_req} 0)
-  set(${_is_silent} 0)
-  set(${_no_cmake_path} 0)
-  set(${_no_cmake_environment_path} 0)
-  if(DEFINED PKG_CONFIG_USE_CMAKE_PREFIX_PATH)
-    if(NOT PKG_CONFIG_USE_CMAKE_PREFIX_PATH)
-      set(${_no_cmake_path} 1)
-      set(${_no_cmake_environment_path} 1)
-    endif()
-  elseif(${CMAKE_MINIMUM_REQUIRED_VERSION} VERSION_LESS 3.1)
-    set(${_no_cmake_path} 1)
-    set(${_no_cmake_environment_path} 1)
-  endif()
-
-  foreach(_pkg ${ARGN})
-    if (_pkg STREQUAL "REQUIRED")
-      set(${_is_req} 1)
-    endif ()
-    if (_pkg STREQUAL "QUIET")
-      set(${_is_silent} 1)
-    endif ()
-    if (_pkg STREQUAL "NO_CMAKE_PATH")
-      set(${_no_cmake_path} 1)
-    endif()
-    if (_pkg STREQUAL "NO_CMAKE_ENVIRONMENT_PATH")
-      set(${_no_cmake_environment_path} 1)
-    endif()
-  endforeach()
-
-  set(${_result} ${ARGN})
-  list(REMOVE_ITEM ${_result} "REQUIRED")
-  list(REMOVE_ITEM ${_result} "QUIET")
-  list(REMOVE_ITEM ${_result} "NO_CMAKE_PATH")
-  list(REMOVE_ITEM ${_result} "NO_CMAKE_ENVIRONMENT_PATH")
-endmacro()
-
-# Add the content of a variable or an environment variable to a list of
-# paths
-# Usage:
-#  - _pkgconfig_add_extra_path(_extra_paths VAR)
-#  - _pkgconfig_add_extra_path(_extra_paths ENV VAR)
-function(_pkgconfig_add_extra_path _extra_paths_var _var)
-  set(_is_env 0)
-  if(_var STREQUAL "ENV")
-    set(_var ${ARGV2})
-    set(_is_env 1)
-  endif()
-  if(NOT _is_env)
-    if(NOT "${${_var}}" STREQUAL "")
-      list(APPEND ${_extra_paths_var} ${CMAKE_PREFIX_PATH})
-    endif()
-  else()
-    if(NOT "$ENV{${_var}}" STREQUAL "")
-      file(TO_CMAKE_PATH "$ENV{${_var}}" _path)
-      list(APPEND ${_extra_paths_var} ${_path})
-      unset(_path)
-    endif()
-  endif()
-  set(${_extra_paths_var} ${${_extra_paths_var}} PARENT_SCOPE)
-endfunction()
-
-###
-macro(_pkg_check_modules_internal _is_required _is_silent _no_cmake_path _no_cmake_environment_path _prefix)
-  _pkgconfig_unset(${_prefix}_FOUND)
-  _pkgconfig_unset(${_prefix}_VERSION)
-  _pkgconfig_unset(${_prefix}_PREFIX)
-  _pkgconfig_unset(${_prefix}_INCLUDEDIR)
-  _pkgconfig_unset(${_prefix}_LIBDIR)
-  _pkgconfig_unset(${_prefix}_LIBS)
-  _pkgconfig_unset(${_prefix}_LIBS_L)
-  _pkgconfig_unset(${_prefix}_LIBS_PATHS)
-  _pkgconfig_unset(${_prefix}_LIBS_OTHER)
-  _pkgconfig_unset(${_prefix}_CFLAGS)
-  _pkgconfig_unset(${_prefix}_CFLAGS_I)
-  _pkgconfig_unset(${_prefix}_CFLAGS_OTHER)
-  _pkgconfig_unset(${_prefix}_STATIC_LIBDIR)
-  _pkgconfig_unset(${_prefix}_STATIC_LIBS)
-  _pkgconfig_unset(${_prefix}_STATIC_LIBS_L)
-  _pkgconfig_unset(${_prefix}_STATIC_LIBS_PATHS)
-  _pkgconfig_unset(${_prefix}_STATIC_LIBS_OTHER)
-  _pkgconfig_unset(${_prefix}_STATIC_CFLAGS)
-  _pkgconfig_unset(${_prefix}_STATIC_CFLAGS_I)
-  _pkgconfig_unset(${_prefix}_STATIC_CFLAGS_OTHER)
-
-  # create a better addressable variable of the modules and calculate its size
-  set(_pkg_check_modules_list ${ARGN})
-  list(LENGTH _pkg_check_modules_list _pkg_check_modules_cnt)
-
-  if(PKG_CONFIG_EXECUTABLE)
-    # give out status message telling checked module
-    if (NOT ${_is_silent})
-      if (_pkg_check_modules_cnt EQUAL 1)
-        message(STATUS "checking for module '${_pkg_check_modules_list}'")
-      else()
-        message(STATUS "checking for modules '${_pkg_check_modules_list}'")
-      endif()
-    endif()
-
-    set(_pkg_check_modules_packages)
-    set(_pkg_check_modules_failed)
-
-    set(_extra_paths)
-
-    if(NOT _no_cmake_path)
-      _pkgconfig_add_extra_path(_extra_paths CMAKE_PREFIX_PATH)
-      _pkgconfig_add_extra_path(_extra_paths CMAKE_FRAMEWORK_PATH)
-      _pkgconfig_add_extra_path(_extra_paths CMAKE_APPBUNDLE_PATH)
-    endif()
-
-    if(NOT _no_cmake_environment_path)
-      _pkgconfig_add_extra_path(_extra_paths ENV CMAKE_PREFIX_PATH)
-      _pkgconfig_add_extra_path(_extra_paths ENV CMAKE_FRAMEWORK_PATH)
-      _pkgconfig_add_extra_path(_extra_paths ENV CMAKE_APPBUNDLE_PATH)
-    endif()
-
-    if(NOT "${_extra_paths}" STREQUAL "")
-      # Save the PKG_CONFIG_PATH environment variable, and add paths
-      # from the CMAKE_PREFIX_PATH variables
-      set(_pkgconfig_path_old $ENV{PKG_CONFIG_PATH})
-      set(_pkgconfig_path ${_pkgconfig_path_old})
-      if(NOT "${_pkgconfig_path}" STREQUAL "")
-        file(TO_CMAKE_PATH "${_pkgconfig_path}" _pkgconfig_path)
-      endif()
-
-      # Create a list of the possible pkgconfig subfolder (depending on
-      # the system
-      set(_lib_dirs)
-      if(NOT DEFINED CMAKE_SYSTEM_NAME
-          OR (CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$"
-              AND NOT CMAKE_CROSSCOMPILING))
-        if(EXISTS "/etc/debian_version") # is this a debian system ?
-          if(CMAKE_LIBRARY_ARCHITECTURE)
-            list(APPEND _lib_dirs "lib/${CMAKE_LIBRARY_ARCHITECTURE}/pkgconfig")
-          endif()
-        else()
-          # not debian, chech the FIND_LIBRARY_USE_LIB64_PATHS property
-          get_property(uselib64 GLOBAL PROPERTY FIND_LIBRARY_USE_LIB64_PATHS)
-          if(uselib64)
-            list(APPEND _lib_dirs "lib64/pkgconfig")
-          endif()
-        endif()
-      endif()
-      list(APPEND _lib_dirs "lib/pkgconfig")
-
-      # Check if directories exist and eventually append them to the
-      # pkgconfig path list
-      foreach(_prefix_dir ${_extra_paths})
-        foreach(_lib_dir ${_lib_dirs})
-          if(EXISTS "${_prefix_dir}/${_lib_dir}")
-            list(APPEND _pkgconfig_path "${_prefix_dir}/${_lib_dir}")
-            list(REMOVE_DUPLICATES _pkgconfig_path)
-          endif()
-        endforeach()
-      endforeach()
-
-      # Prepare and set the environment variable
-      if(NOT "${_pkgconfig_path}" STREQUAL "")
-        # remove empty values from the list
-        list(REMOVE_ITEM _pkgconfig_path "")
-        file(TO_NATIVE_PATH "${_pkgconfig_path}" _pkgconfig_path)
-        if(UNIX)
-          string(REPLACE ";" ":" _pkgconfig_path "${_pkgconfig_path}")
-          string(REPLACE "\\ " " " _pkgconfig_path "${_pkgconfig_path}")
-        endif()
-        set(ENV{PKG_CONFIG_PATH} ${_pkgconfig_path})
-      endif()
-
-      # Unset variables
-      unset(_lib_dirs)
-      unset(_pkgconfig_path)
-    endif()
-
-    # iterate through module list and check whether they exist and match the required version
-    foreach (_pkg_check_modules_pkg ${_pkg_check_modules_list})
-      set(_pkg_check_modules_exist_query)
-
-      # check whether version is given
-      if (_pkg_check_modules_pkg MATCHES "(.*[^><])(>=|=|<=)(.*)")
-        set(_pkg_check_modules_pkg_name "${CMAKE_MATCH_1}")
-        set(_pkg_check_modules_pkg_op "${CMAKE_MATCH_2}")
-        set(_pkg_check_modules_pkg_ver "${CMAKE_MATCH_3}")
-      else()
-        set(_pkg_check_modules_pkg_name "${_pkg_check_modules_pkg}")
-        set(_pkg_check_modules_pkg_op)
-        set(_pkg_check_modules_pkg_ver)
-      endif()
-
-      # handle the operands
-      if (_pkg_check_modules_pkg_op STREQUAL ">=")
-        list(APPEND _pkg_check_modules_exist_query --atleast-version)
-      endif()
-
-      if (_pkg_check_modules_pkg_op STREQUAL "=")
-        list(APPEND _pkg_check_modules_exist_query --exact-version)
-      endif()
-
-      if (_pkg_check_modules_pkg_op STREQUAL "<=")
-        list(APPEND _pkg_check_modules_exist_query --max-version)
-      endif()
-
-      # create the final query which is of the format:
-      # * --atleast-version <version> <pkg-name>
-      # * --exact-version <version> <pkg-name>
-      # * --max-version <version> <pkg-name>
-      # * --exists <pkg-name>
-      if (_pkg_check_modules_pkg_op)
-        list(APPEND _pkg_check_modules_exist_query "${_pkg_check_modules_pkg_ver}")
-      else()
-        list(APPEND _pkg_check_modules_exist_query --exists)
-      endif()
-
-      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_VERSION)
-      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_PREFIX)
-      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_INCLUDEDIR)
-      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_LIBDIR)
-
-      list(APPEND _pkg_check_modules_exist_query "${_pkg_check_modules_pkg_name}")
-      list(APPEND _pkg_check_modules_packages    "${_pkg_check_modules_pkg_name}")
-
-      # execute the query
-      execute_process(
-        COMMAND ${PKG_CONFIG_EXECUTABLE} ${_pkg_check_modules_exist_query}
-        RESULT_VARIABLE _pkgconfig_retval)
-
-      # evaluate result and tell failures
-      if (_pkgconfig_retval)
-        if(NOT ${_is_silent})
-          message(STATUS "  package '${_pkg_check_modules_pkg}' not found")
-        endif()
-
-        set(_pkg_check_modules_failed 1)
-      endif()
-    endforeach()
-
-    if(_pkg_check_modules_failed)
-      # fail when requested
-      if (${_is_required})
-        message(FATAL_ERROR "A required package was not found")
-      endif ()
-    else()
-      # when we are here, we checked whether requested modules
-      # exist. Now, go through them and set variables
-
-      _pkgconfig_set(${_prefix}_FOUND 1)
-      list(LENGTH _pkg_check_modules_packages pkg_count)
-
-      # iterate through all modules again and set individual variables
-      foreach (_pkg_check_modules_pkg ${_pkg_check_modules_packages})
-        # handle case when there is only one package required
-        if (pkg_count EQUAL 1)
-          set(_pkg_check_prefix "${_prefix}")
-        else()
-          set(_pkg_check_prefix "${_prefix}_${_pkg_check_modules_pkg}")
-        endif()
-
-        _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" VERSION    ""   --modversion )
-        _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" PREFIX     ""   --variable=prefix )
-        _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" INCLUDEDIR ""   --variable=includedir )
-        _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" LIBDIR     ""   --variable=libdir )
-
-        if (NOT ${_is_silent})
-          message(STATUS "  found ${_pkg_check_modules_pkg}, version ${_pkgconfig_VERSION}")
-        endif ()
-      endforeach()
-
-      # set variables which are combined for multiple modules
-      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LIBRARIES           "(^| )-l" --libs-only-l )
-      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LIBRARY_DIRS        "(^| )-L" --libs-only-L )
-      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LDFLAGS             ""        --libs )
-      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LDFLAGS_OTHER       ""        --libs-only-other )
-
-      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" INCLUDE_DIRS        "(^| )-I" --cflags-only-I )
-      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" CFLAGS              ""        --cflags )
-      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" CFLAGS_OTHER        ""        --cflags-only-other )
-    endif()
-
-    if(NOT "${_extra_paths}" STREQUAL "")
-      # Restore the environment variable
-      set(ENV{PKG_CONFIG_PATH} ${_pkgconfig_path})
-    endif()
-
-    unset(_extra_paths)
-    unset(_pkgconfig_path_old)
-  else()
-    if (${_is_required})
-      message(SEND_ERROR "pkg-config tool not found")
-    endif ()
-  endif()
-endmacro()
-
-###
-### User visible macros start here
-###
-
-#[========================================[.rst:
-.. command:: pkg_check_modules
-
- Checks for all the given modules. ::
-
-    pkg_check_modules(<PREFIX> [REQUIRED] [QUIET]
-                      [NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
-                      <MODULE> [<MODULE>]*)
-
-
- When the ``REQUIRED`` argument was set, macros will fail with an error
- when module(s) could not be found.
-
- When the ``QUIET`` argument is set, no status messages will be printed.
-
- By default, if :variable:`CMAKE_MINIMUM_REQUIRED_VERSION` is 3.1 or
- later, or if :variable:`PKG_CONFIG_USE_CMAKE_PREFIX_PATH` is set, the
- :variable:`CMAKE_PREFIX_PATH`, :variable:`CMAKE_FRAMEWORK_PATH`, and
- :variable:`CMAKE_APPBUNDLE_PATH` cache and environment variables will
- be added to ``pkg-config`` search path.
- The ``NO_CMAKE_PATH`` and ``NO_CMAKE_ENVIRONMENT_PATH`` arguments
- disable this behavior for the cache variables and the environment
- variables, respectively.
-
- It sets the following variables: ::
-
-    PKG_CONFIG_FOUND          ... if pkg-config executable was found
-    PKG_CONFIG_EXECUTABLE     ... pathname of the pkg-config program
-    PKG_CONFIG_VERSION_STRING ... the version of the pkg-config program found
-                                  (since CMake 2.8.8)
-
- For the following variables two sets of values exist; first one is the
- common one and has the given PREFIX.  The second set contains flags
- which are given out when ``pkg-config`` was called with the ``--static``
- option. ::
-
-    <XPREFIX>_FOUND          ... set to 1 if module(s) exist
-    <XPREFIX>_LIBRARIES      ... only the libraries (w/o the '-l')
-    <XPREFIX>_LIBRARY_DIRS   ... the paths of the libraries (w/o the '-L')
-    <XPREFIX>_LDFLAGS        ... all required linker flags
-    <XPREFIX>_LDFLAGS_OTHER  ... all other linker flags
-    <XPREFIX>_INCLUDE_DIRS   ... the '-I' preprocessor flags (w/o the '-I')
-    <XPREFIX>_CFLAGS         ... all required cflags
-    <XPREFIX>_CFLAGS_OTHER   ... the other compiler flags
-
- ::
-
-    <XPREFIX> = <PREFIX>        for common case
-    <XPREFIX> = <PREFIX>_STATIC for static linking
-
- There are some special variables whose prefix depends on the count of
- given modules.  When there is only one module, <PREFIX> stays
- unchanged.  When there are multiple modules, the prefix will be
- changed to <PREFIX>_<MODNAME>: ::
-
-    <XPREFIX>_VERSION    ... version of the module
-    <XPREFIX>_PREFIX     ... prefix-directory of the module
-    <XPREFIX>_INCLUDEDIR ... include-dir of the module
-    <XPREFIX>_LIBDIR     ... lib-dir of the module
-
- ::
-
-    <XPREFIX> = <PREFIX>  when |MODULES| == 1, else
-    <XPREFIX> = <PREFIX>_<MODNAME>
-
- A <MODULE> parameter can have the following formats: ::
-
-    {MODNAME}            ... matches any version
-    {MODNAME}>={VERSION} ... at least version <VERSION> is required
-    {MODNAME}={VERSION}  ... exactly version <VERSION> is required
-    {MODNAME}<={VERSION} ... modules must not be newer than <VERSION>
-
- Examples
-
- .. code-block:: cmake
-
-    pkg_check_modules (GLIB2   glib-2.0)
-
- .. code-block:: cmake
-
-    pkg_check_modules (GLIB2   glib-2.0>=2.10)
-
- Requires at least version 2.10 of glib2 and defines e.g.
- ``GLIB2_VERSION=2.10.3``
-
- .. code-block:: cmake
-
-    pkg_check_modules (FOO     glib-2.0>=2.10 gtk+-2.0)
-
- Requires both glib2 and gtk2, and defines e.g.
- ``FOO_glib-2.0_VERSION=2.10.3`` and ``FOO_gtk+-2.0_VERSION=2.8.20``
-
- .. code-block:: cmake
-
-    pkg_check_modules (XRENDER REQUIRED xrender)
-
- Defines for example::
-
-   XRENDER_LIBRARIES=Xrender;X11``
-   XRENDER_STATIC_LIBRARIES=Xrender;X11;pthread;Xau;Xdmcp
-#]========================================]
-macro(pkg_check_modules _prefix _module0)
-  # check cached value
-  if (NOT DEFINED __pkg_config_checked_${_prefix} OR __pkg_config_checked_${_prefix} LESS ${PKG_CONFIG_VERSION} OR NOT ${_prefix}_FOUND)
-    _pkgconfig_parse_options   (_pkg_modules _pkg_is_required _pkg_is_silent _no_cmake_path _no_cmake_environment_path "${_module0}" ${ARGN})
-    _pkg_check_modules_internal("${_pkg_is_required}" "${_pkg_is_silent}" ${_no_cmake_path} ${_no_cmake_environment_path} "${_prefix}" ${_pkg_modules})
-
-    _pkgconfig_set(__pkg_config_checked_${_prefix} ${PKG_CONFIG_VERSION})
-  endif()
-endmacro()
-
-
-#[========================================[.rst:
-.. command:: pkg_search_module
-
- Same as :command:`pkg_check_modules`, but instead it checks for given
- modules and uses the first working one. ::
-
-    pkg_search_module(<PREFIX> [REQUIRED] [QUIET]
-                      [NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
-                      <MODULE> [<MODULE>]*)
-
- Examples
-
- .. code-block:: cmake
-
-    pkg_search_module (BAR     libxml-2.0 libxml2 libxml>=2)
-#]========================================]
-macro(pkg_search_module _prefix _module0)
-  # check cached value
-  if (NOT DEFINED __pkg_config_checked_${_prefix} OR __pkg_config_checked_${_prefix} LESS ${PKG_CONFIG_VERSION} OR NOT ${_prefix}_FOUND)
-    set(_pkg_modules_found 0)
-    _pkgconfig_parse_options(_pkg_modules_alt _pkg_is_required _pkg_is_silent _no_cmake_path _no_cmake_environment_path "${_module0}" ${ARGN})
-
-    if (NOT ${_pkg_is_silent})
-      message(STATUS "checking for one of the modules '${_pkg_modules_alt}'")
-    endif ()
-
-    # iterate through all modules and stop at the first working one.
-    foreach(_pkg_alt ${_pkg_modules_alt})
-      if(NOT _pkg_modules_found)
-        _pkg_check_modules_internal(0 1 ${_no_cmake_path} ${_no_cmake_environment_path} "${_prefix}" "${_pkg_alt}")
-      endif()
-
-      if (${_prefix}_FOUND)
-        set(_pkg_modules_found 1)
-      endif()
-    endforeach()
-
-    if (NOT ${_prefix}_FOUND)
-      if(${_pkg_is_required})
-        message(SEND_ERROR "None of the required '${_pkg_modules_alt}' found")
-      endif()
-    endif()
-
-    _pkgconfig_set(__pkg_config_checked_${_prefix} ${PKG_CONFIG_VERSION})
-  endif()
-endmacro()
-
-
-#[========================================[.rst:
-.. variable:: PKG_CONFIG_EXECUTABLE
-
- Path to the pkg-config executable.
-
-
-.. variable:: PKG_CONFIG_USE_CMAKE_PREFIX_PATH
-
- Whether :command:`pkg_check_modules` and :command:`pkg_search_module`
- should add the paths in :variable:`CMAKE_PREFIX_PATH`,
- :variable:`CMAKE_FRAMEWORK_PATH`, and :variable:`CMAKE_APPBUNDLE_PATH`
- cache and environment variables to ``pkg-config`` search path.
-
- If this variable is not set, this behavior is enabled by default if
- :variable:`CMAKE_MINIMUM_REQUIRED_VERSION` is 3.1 or later, disabled
- otherwise.
-#]========================================]
-
-
-### Local Variables:
-### mode: cmake
-### End:
diff --git a/share/cmake-3.2/Modules/FindPostgreSQL.cmake b/share/cmake-3.2/Modules/FindPostgreSQL.cmake
deleted file mode 100644
index 97666c8..0000000
--- a/share/cmake-3.2/Modules/FindPostgreSQL.cmake
+++ /dev/null
@@ -1,186 +0,0 @@
-#.rst:
-# FindPostgreSQL
-# --------------
-#
-# Find the PostgreSQL installation.
-#
-# In Windows, we make the assumption that, if the PostgreSQL files are
-# installed, the default directory will be C:\Program Files\PostgreSQL.
-#
-# This module defines
-#
-# ::
-#
-#   PostgreSQL_LIBRARIES - the PostgreSQL libraries needed for linking
-#   PostgreSQL_INCLUDE_DIRS - the directories of the PostgreSQL headers
-#   PostgreSQL_VERSION_STRING - the version of PostgreSQL found (since CMake 2.8.8)
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# ----------------------------------------------------------------------------
-# History:
-# This module is derived from the module originally found in the VTK source tree.
-#
-# ----------------------------------------------------------------------------
-# Note:
-# PostgreSQL_ADDITIONAL_VERSIONS is a variable that can be used to set the
-# version mumber of the implementation of PostgreSQL.
-# In Windows the default installation of PostgreSQL uses that as part of the path.
-# E.g C:\Program Files\PostgreSQL\8.4.
-# Currently, the following version numbers are known to this module:
-# "9.1" "9.0" "8.4" "8.3" "8.2" "8.1" "8.0"
-#
-# To use this variable just do something like this:
-# set(PostgreSQL_ADDITIONAL_VERSIONS "9.2" "8.4.4")
-# before calling find_package(PostgreSQL) in your CMakeLists.txt file.
-# This will mean that the versions you set here will be found first in the order
-# specified before the default ones are searched.
-#
-# ----------------------------------------------------------------------------
-# You may need to manually set:
-#  PostgreSQL_INCLUDE_DIR  - the path to where the PostgreSQL include files are.
-#  PostgreSQL_LIBRARY_DIR  - The path to where the PostgreSQL library files are.
-# If FindPostgreSQL.cmake cannot find the include files or the library files.
-#
-# ----------------------------------------------------------------------------
-# The following variables are set if PostgreSQL is found:
-#  PostgreSQL_FOUND         - Set to true when PostgreSQL is found.
-#  PostgreSQL_INCLUDE_DIRS  - Include directories for PostgreSQL
-#  PostgreSQL_LIBRARY_DIRS  - Link directories for PostgreSQL libraries
-#  PostgreSQL_LIBRARIES     - The PostgreSQL libraries.
-#
-# ----------------------------------------------------------------------------
-# If you have installed PostgreSQL in a non-standard location.
-# (Please note that in the following comments, it is assumed that <Your Path>
-# points to the root directory of the include directory of PostgreSQL.)
-# Then you have three options.
-# 1) After CMake runs, set PostgreSQL_INCLUDE_DIR to <Your Path>/include and
-#    PostgreSQL_LIBRARY_DIR to wherever the library pq (or libpq in windows) is
-# 2) Use CMAKE_INCLUDE_PATH to set a path to <Your Path>/PostgreSQL<-version>. This will allow find_path()
-#    to locate PostgreSQL_INCLUDE_DIR by utilizing the PATH_SUFFIXES option. e.g. In your CMakeLists.txt file
-#    set(CMAKE_INCLUDE_PATH ${CMAKE_INCLUDE_PATH} "<Your Path>/include")
-# 3) Set an environment variable called ${PostgreSQL_ROOT} that points to the root of where you have
-#    installed PostgreSQL, e.g. <Your Path>.
-#
-# ----------------------------------------------------------------------------
-
-set(PostgreSQL_INCLUDE_PATH_DESCRIPTION "top-level directory containing the PostgreSQL include directories. E.g /usr/local/include/PostgreSQL/8.4 or C:/Program Files/PostgreSQL/8.4/include")
-set(PostgreSQL_INCLUDE_DIR_MESSAGE "Set the PostgreSQL_INCLUDE_DIR cmake cache entry to the ${PostgreSQL_INCLUDE_PATH_DESCRIPTION}")
-set(PostgreSQL_LIBRARY_PATH_DESCRIPTION "top-level directory containing the PostgreSQL libraries.")
-set(PostgreSQL_LIBRARY_DIR_MESSAGE "Set the PostgreSQL_LIBRARY_DIR cmake cache entry to the ${PostgreSQL_LIBRARY_PATH_DESCRIPTION}")
-set(PostgreSQL_ROOT_DIR_MESSAGE "Set the PostgreSQL_ROOT system variable to where PostgreSQL is found on the machine E.g C:/Program Files/PostgreSQL/8.4")
-
-
-set(PostgreSQL_KNOWN_VERSIONS ${PostgreSQL_ADDITIONAL_VERSIONS}
-    "9.1" "9.0" "8.4" "8.3" "8.2" "8.1" "8.0")
-
-# Define additional search paths for root directories.
-if ( WIN32 )
-  foreach (suffix ${PostgreSQL_KNOWN_VERSIONS} )
-    set(PostgreSQL_ADDITIONAL_SEARCH_PATHS ${PostgreSQL_ADDITIONAL_SEARCH_PATHS} "C:/Program Files/PostgreSQL/${suffix}" )
-  endforeach()
-endif()
-set( PostgreSQL_ROOT_DIRECTORIES
-   ENV PostgreSQL_ROOT
-   ${PostgreSQL_ROOT}
-   ${PostgreSQL_ADDITIONAL_SEARCH_PATHS}
-)
-
-#
-# Look for an installation.
-#
-find_path(PostgreSQL_INCLUDE_DIR
-  NAMES libpq-fe.h
-  PATHS
-   # Look in other places.
-   ${PostgreSQL_ROOT_DIRECTORIES}
-  PATH_SUFFIXES
-    pgsql
-    postgresql
-    include
-  # Help the user find it if we cannot.
-  DOC "The ${PostgreSQL_INCLUDE_DIR_MESSAGE}"
-)
-
-find_path(PostgreSQL_TYPE_INCLUDE_DIR
-  NAMES catalog/pg_type.h
-  PATHS
-   # Look in other places.
-   ${PostgreSQL_ROOT_DIRECTORIES}
-  PATH_SUFFIXES
-    postgresql
-    pgsql/server
-    postgresql/server
-    include/server
-  # Help the user find it if we cannot.
-  DOC "The ${PostgreSQL_INCLUDE_DIR_MESSAGE}"
-)
-
-# The PostgreSQL library.
-set (PostgreSQL_LIBRARY_TO_FIND pq)
-# Setting some more prefixes for the library
-set (PostgreSQL_LIB_PREFIX "")
-if ( WIN32 )
-  set (PostgreSQL_LIB_PREFIX ${PostgreSQL_LIB_PREFIX} "lib")
-  set ( PostgreSQL_LIBRARY_TO_FIND ${PostgreSQL_LIB_PREFIX}${PostgreSQL_LIBRARY_TO_FIND})
-endif()
-
-find_library( PostgreSQL_LIBRARY
- NAMES ${PostgreSQL_LIBRARY_TO_FIND}
- PATHS
-   ${PostgreSQL_ROOT_DIRECTORIES}
- PATH_SUFFIXES
-   lib
-)
-get_filename_component(PostgreSQL_LIBRARY_DIR ${PostgreSQL_LIBRARY} PATH)
-
-if (PostgreSQL_INCLUDE_DIR)
-  # Some platforms include multiple pg_config.hs for multi-lib configurations
-  # This is a temporary workaround.  A better solution would be to compile
-  # a dummy c file and extract the value of the symbol.
-  file(GLOB _PG_CONFIG_HEADERS "${PostgreSQL_INCLUDE_DIR}/pg_config*.h")
-  foreach(_PG_CONFIG_HEADER ${_PG_CONFIG_HEADERS})
-    if(EXISTS "${_PG_CONFIG_HEADER}")
-      file(STRINGS "${_PG_CONFIG_HEADER}" pgsql_version_str
-           REGEX "^#define[\t ]+PG_VERSION[\t ]+\".*\"")
-      if(pgsql_version_str)
-        string(REGEX REPLACE "^#define[\t ]+PG_VERSION[\t ]+\"([^\"]*)\".*"
-               "\\1" PostgreSQL_VERSION_STRING "${pgsql_version_str}")
-        break()
-      endif()
-    endif()
-  endforeach()
-  unset(pgsql_version_str)
-endif()
-
-# Did we find anything?
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-find_package_handle_standard_args(PostgreSQL
-                                  REQUIRED_VARS PostgreSQL_LIBRARY PostgreSQL_INCLUDE_DIR PostgreSQL_TYPE_INCLUDE_DIR
-                                  VERSION_VAR PostgreSQL_VERSION_STRING)
-set( PostgreSQL_FOUND  ${POSTGRESQL_FOUND})
-
-# Now try to get the include and library path.
-if(PostgreSQL_FOUND)
-
-  set(PostgreSQL_INCLUDE_DIRS ${PostgreSQL_INCLUDE_DIR} ${PostgreSQL_TYPE_INCLUDE_DIR} )
-  set(PostgreSQL_LIBRARY_DIRS ${PostgreSQL_LIBRARY_DIR} )
-  set(PostgreSQL_LIBRARIES ${PostgreSQL_LIBRARY_TO_FIND})
-
-  #message("Final PostgreSQL include dir: ${PostgreSQL_INCLUDE_DIRS}")
-  #message("Final PostgreSQL library dir: ${PostgreSQL_LIBRARY_DIRS}")
-  #message("Final PostgreSQL libraries:   ${PostgreSQL_LIBRARIES}")
-endif()
-
-mark_as_advanced(PostgreSQL_INCLUDE_DIR PostgreSQL_TYPE_INCLUDE_DIR PostgreSQL_LIBRARY )
diff --git a/share/cmake-3.2/Modules/FindProtobuf.cmake b/share/cmake-3.2/Modules/FindProtobuf.cmake
deleted file mode 100644
index f01bd41..0000000
--- a/share/cmake-3.2/Modules/FindProtobuf.cmake
+++ /dev/null
@@ -1,249 +0,0 @@
-#.rst:
-# FindProtobuf
-# ------------
-#
-# Locate and configure the Google Protocol Buffers library.
-#
-# The following variables can be set and are optional:
-#
-# ``PROTOBUF_SRC_ROOT_FOLDER``
-#   When compiling with MSVC, if this cache variable is set
-#   the protobuf-default VS project build locations
-#   (vsprojects/Debug & vsprojects/Release) will be searched
-#   for libraries and binaries.
-# ``PROTOBUF_IMPORT_DIRS``
-#   List of additional directories to be searched for
-#   imported .proto files.
-#
-# Defines the following variables:
-#
-# ``PROTOBUF_FOUND``
-#   Found the Google Protocol Buffers library
-#   (libprotobuf & header files)
-# ``PROTOBUF_INCLUDE_DIRS``
-#   Include directories for Google Protocol Buffers
-# ``PROTOBUF_LIBRARIES``
-#   The protobuf libraries
-# ``PROTOBUF_PROTOC_LIBRARIES``
-#   The protoc libraries
-# ``PROTOBUF_LITE_LIBRARIES``
-#   The protobuf-lite libraries
-#
-# The following cache variables are also available to set or use:
-#
-# ``PROTOBUF_LIBRARY``
-#   The protobuf library
-# ``PROTOBUF_PROTOC_LIBRARY``
-#   The protoc library
-# ``PROTOBUF_INCLUDE_DIR``
-#   The include directory for protocol buffers
-# ``PROTOBUF_PROTOC_EXECUTABLE``
-#   The protoc compiler
-# ``PROTOBUF_LIBRARY_DEBUG``
-#   The protobuf library (debug)
-# ``PROTOBUF_PROTOC_LIBRARY_DEBUG``
-#   The protoc library (debug)
-# ``PROTOBUF_LITE_LIBRARY``
-#   The protobuf lite library
-# ``PROTOBUF_LITE_LIBRARY_DEBUG``
-#   The protobuf lite library (debug)
-#
-# Example:
-#
-# .. code-block:: cmake
-#
-#   find_package(Protobuf REQUIRED)
-#   include_directories(${PROTOBUF_INCLUDE_DIRS})
-#   include_directories(${CMAKE_CURRENT_BINARY_DIR})
-#   protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS foo.proto)
-#   add_executable(bar bar.cc ${PROTO_SRCS} ${PROTO_HDRS})
-#   target_link_libraries(bar ${PROTOBUF_LIBRARIES})
-#
-# .. note::
-#   The PROTOBUF_GENERATE_CPP macro and add_executable() or
-#   add_library() calls only work properly within the same
-#   directory.
-#
-# .. command:: protobuf_generate_cpp
-#
-#   Add custom commands to process ``.proto`` files::
-#
-#     protobuf_generate_cpp (<SRCS> <HDRS> [<ARGN>...])
-#
-#   ``SRCS``
-#     Variable to define with autogenerated source files
-#   ``HDRS``
-#     Variable to define with autogenerated header files
-#   ``ARGN``
-#     ``.proto`` files
-
-#=============================================================================
-# Copyright 2009 Kitware, Inc.
-# Copyright 2009-2011 Philip Lowman <philip@yhbt.com>
-# Copyright 2008 Esben Mose Hansen, Ange Optimization ApS
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-function(PROTOBUF_GENERATE_CPP SRCS HDRS)
-  if(NOT ARGN)
-    message(SEND_ERROR "Error: PROTOBUF_GENERATE_CPP() called without any proto files")
-    return()
-  endif()
-
-  if(PROTOBUF_GENERATE_CPP_APPEND_PATH)
-    # Create an include path for each file specified
-    foreach(FIL ${ARGN})
-      get_filename_component(ABS_FIL ${FIL} ABSOLUTE)
-      get_filename_component(ABS_PATH ${ABS_FIL} PATH)
-      list(FIND _protobuf_include_path ${ABS_PATH} _contains_already)
-      if(${_contains_already} EQUAL -1)
-          list(APPEND _protobuf_include_path -I ${ABS_PATH})
-      endif()
-    endforeach()
-  else()
-    set(_protobuf_include_path -I ${CMAKE_CURRENT_SOURCE_DIR})
-  endif()
-
-  if(DEFINED PROTOBUF_IMPORT_DIRS)
-    foreach(DIR ${PROTOBUF_IMPORT_DIRS})
-      get_filename_component(ABS_PATH ${DIR} ABSOLUTE)
-      list(FIND _protobuf_include_path ${ABS_PATH} _contains_already)
-      if(${_contains_already} EQUAL -1)
-          list(APPEND _protobuf_include_path -I ${ABS_PATH})
-      endif()
-    endforeach()
-  endif()
-
-  set(${SRCS})
-  set(${HDRS})
-  foreach(FIL ${ARGN})
-    get_filename_component(ABS_FIL ${FIL} ABSOLUTE)
-    get_filename_component(FIL_WE ${FIL} NAME_WE)
-
-    list(APPEND ${SRCS} "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.cc")
-    list(APPEND ${HDRS} "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.h")
-
-    add_custom_command(
-      OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.cc"
-             "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.h"
-      COMMAND  ${PROTOBUF_PROTOC_EXECUTABLE}
-      ARGS --cpp_out  ${CMAKE_CURRENT_BINARY_DIR} ${_protobuf_include_path} ${ABS_FIL}
-      DEPENDS ${ABS_FIL} ${PROTOBUF_PROTOC_EXECUTABLE}
-      COMMENT "Running C++ protocol buffer compiler on ${FIL}"
-      VERBATIM )
-  endforeach()
-
-  set_source_files_properties(${${SRCS}} ${${HDRS}} PROPERTIES GENERATED TRUE)
-  set(${SRCS} ${${SRCS}} PARENT_SCOPE)
-  set(${HDRS} ${${HDRS}} PARENT_SCOPE)
-endfunction()
-
-# Internal function: search for normal library as well as a debug one
-#    if the debug one is specified also include debug/optimized keywords
-#    in *_LIBRARIES variable
-function(_protobuf_find_libraries name filename)
-   find_library(${name}_LIBRARY
-       NAMES ${filename}
-       PATHS ${PROTOBUF_SRC_ROOT_FOLDER}/vsprojects/Release)
-   mark_as_advanced(${name}_LIBRARY)
-
-   find_library(${name}_LIBRARY_DEBUG
-       NAMES ${filename}
-       PATHS ${PROTOBUF_SRC_ROOT_FOLDER}/vsprojects/Debug)
-   mark_as_advanced(${name}_LIBRARY_DEBUG)
-
-   if(NOT ${name}_LIBRARY_DEBUG)
-      # There is no debug library
-      set(${name}_LIBRARY_DEBUG ${${name}_LIBRARY} PARENT_SCOPE)
-      set(${name}_LIBRARIES     ${${name}_LIBRARY} PARENT_SCOPE)
-   else()
-      # There IS a debug library
-      set(${name}_LIBRARIES
-          optimized ${${name}_LIBRARY}
-          debug     ${${name}_LIBRARY_DEBUG}
-          PARENT_SCOPE
-      )
-   endif()
-endfunction()
-
-# Internal function: find threads library
-function(_protobuf_find_threads)
-    set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
-    find_package(Threads)
-    if(Threads_FOUND)
-        list(APPEND PROTOBUF_LIBRARIES ${CMAKE_THREAD_LIBS_INIT})
-        set(PROTOBUF_LIBRARIES "${PROTOBUF_LIBRARIES}" PARENT_SCOPE)
-    endif()
-endfunction()
-
-#
-# Main.
-#
-
-# By default have PROTOBUF_GENERATE_CPP macro pass -I to protoc
-# for each directory where a proto file is referenced.
-if(NOT DEFINED PROTOBUF_GENERATE_CPP_APPEND_PATH)
-  set(PROTOBUF_GENERATE_CPP_APPEND_PATH TRUE)
-endif()
-
-
-# Google's provided vcproj files generate libraries with a "lib"
-# prefix on Windows
-if(MSVC)
-    set(PROTOBUF_ORIG_FIND_LIBRARY_PREFIXES "${CMAKE_FIND_LIBRARY_PREFIXES}")
-    set(CMAKE_FIND_LIBRARY_PREFIXES "lib" "")
-
-    find_path(PROTOBUF_SRC_ROOT_FOLDER protobuf.pc.in)
-endif()
-
-# The Protobuf library
-_protobuf_find_libraries(PROTOBUF protobuf)
-#DOC "The Google Protocol Buffers RELEASE Library"
-
-_protobuf_find_libraries(PROTOBUF_LITE protobuf-lite)
-
-# The Protobuf Protoc Library
-_protobuf_find_libraries(PROTOBUF_PROTOC protoc)
-
-# Restore original find library prefixes
-if(MSVC)
-    set(CMAKE_FIND_LIBRARY_PREFIXES "${PROTOBUF_ORIG_FIND_LIBRARY_PREFIXES}")
-endif()
-
-if(UNIX)
-    _protobuf_find_threads()
-endif()
-
-# Find the include directory
-find_path(PROTOBUF_INCLUDE_DIR
-    google/protobuf/service.h
-    PATHS ${PROTOBUF_SRC_ROOT_FOLDER}/src
-)
-mark_as_advanced(PROTOBUF_INCLUDE_DIR)
-
-# Find the protoc Executable
-find_program(PROTOBUF_PROTOC_EXECUTABLE
-    NAMES protoc
-    DOC "The Google Protocol Buffers Compiler"
-    PATHS
-    ${PROTOBUF_SRC_ROOT_FOLDER}/vsprojects/Release
-    ${PROTOBUF_SRC_ROOT_FOLDER}/vsprojects/Debug
-)
-mark_as_advanced(PROTOBUF_PROTOC_EXECUTABLE)
-
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(PROTOBUF DEFAULT_MSG
-    PROTOBUF_LIBRARY PROTOBUF_INCLUDE_DIR)
-
-if(PROTOBUF_FOUND)
-    set(PROTOBUF_INCLUDE_DIRS ${PROTOBUF_INCLUDE_DIR})
-endif()
diff --git a/share/cmake-3.2/Modules/FindPythonInterp.cmake b/share/cmake-3.2/Modules/FindPythonInterp.cmake
deleted file mode 100644
index 8784e18..0000000
--- a/share/cmake-3.2/Modules/FindPythonInterp.cmake
+++ /dev/null
@@ -1,164 +0,0 @@
-#.rst:
-# FindPythonInterp
-# ----------------
-#
-# Find python interpreter
-#
-# This module finds if Python interpreter is installed and determines
-# where the executables are.  This code sets the following variables:
-#
-# ::
-#
-#   PYTHONINTERP_FOUND         - Was the Python executable found
-#   PYTHON_EXECUTABLE          - path to the Python interpreter
-#
-#
-#
-# ::
-#
-#   PYTHON_VERSION_STRING      - Python version found e.g. 2.5.2
-#   PYTHON_VERSION_MAJOR       - Python major version found e.g. 2
-#   PYTHON_VERSION_MINOR       - Python minor version found e.g. 5
-#   PYTHON_VERSION_PATCH       - Python patch version found e.g. 2
-#
-#
-#
-# The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
-# of version numbers that should be taken into account when searching
-# for Python.  You need to set this variable before calling
-# find_package(PythonInterp).
-#
-# If also calling find_package(PythonLibs), call find_package(PythonInterp)
-# first to get the currently active Python version by default with a consistent
-# version of PYTHON_LIBRARIES.
-
-#=============================================================================
-# Copyright 2005-2010 Kitware, Inc.
-# Copyright 2011 Bjoern Ricks <bjoern.ricks@gmail.com>
-# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-unset(_Python_NAMES)
-
-set(_PYTHON1_VERSIONS 1.6 1.5)
-set(_PYTHON2_VERSIONS 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0)
-set(_PYTHON3_VERSIONS 3.4 3.3 3.2 3.1 3.0)
-
-if(PythonInterp_FIND_VERSION)
-    if(PythonInterp_FIND_VERSION_COUNT GREATER 1)
-        set(_PYTHON_FIND_MAJ_MIN "${PythonInterp_FIND_VERSION_MAJOR}.${PythonInterp_FIND_VERSION_MINOR}")
-        list(APPEND _Python_NAMES
-             python${_PYTHON_FIND_MAJ_MIN}
-             python${PythonInterp_FIND_VERSION_MAJOR})
-        unset(_PYTHON_FIND_OTHER_VERSIONS)
-        if(NOT PythonInterp_FIND_VERSION_EXACT)
-            foreach(_PYTHON_V ${_PYTHON${PythonInterp_FIND_VERSION_MAJOR}_VERSIONS})
-                if(NOT _PYTHON_V VERSION_LESS _PYTHON_FIND_MAJ_MIN)
-                    list(APPEND _PYTHON_FIND_OTHER_VERSIONS ${_PYTHON_V})
-                endif()
-             endforeach()
-        endif()
-        unset(_PYTHON_FIND_MAJ_MIN)
-    else()
-        list(APPEND _Python_NAMES python${PythonInterp_FIND_VERSION_MAJOR})
-        set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON${PythonInterp_FIND_VERSION_MAJOR}_VERSIONS})
-    endif()
-else()
-    set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON3_VERSIONS} ${_PYTHON2_VERSIONS} ${_PYTHON1_VERSIONS})
-endif()
-find_program(PYTHON_EXECUTABLE NAMES ${_Python_NAMES})
-
-# Set up the versions we know about, in the order we will search. Always add
-# the user supplied additional versions to the front.
-set(_Python_VERSIONS ${Python_ADDITIONAL_VERSIONS})
-# If FindPythonInterp has already found the major and minor version,
-# insert that version next to get consistent versions of the interpreter and
-# library.
-if(DEFINED PYTHONLIBS_VERSION_STRING)
-  string(REPLACE "." ";" _PYTHONLIBS_VERSION "${PYTHONLIBS_VERSION_STRING}")
-  list(GET _PYTHONLIBS_VERSION 0 _PYTHONLIBS_VERSION_MAJOR)
-  list(GET _PYTHONLIBS_VERSION 1 _PYTHONLIBS_VERSION_MINOR)
-  list(APPEND _Python_VERSIONS ${_PYTHONLIBS_VERSION_MAJOR}.${_PYTHONLIBS_VERSION_MINOR})
-endif()
-# Search for the current active python version first
-list(APPEND _Python_VERSIONS ";")
-list(APPEND _Python_VERSIONS ${_PYTHON_FIND_OTHER_VERSIONS})
-
-unset(_PYTHON_FIND_OTHER_VERSIONS)
-unset(_PYTHON1_VERSIONS)
-unset(_PYTHON2_VERSIONS)
-unset(_PYTHON3_VERSIONS)
-
-# Search for newest python version if python executable isn't found
-if(NOT PYTHON_EXECUTABLE)
-    foreach(_CURRENT_VERSION IN LISTS _Python_VERSIONS)
-      set(_Python_NAMES python${_CURRENT_VERSION})
-      if(WIN32)
-        list(APPEND _Python_NAMES python)
-      endif()
-      find_program(PYTHON_EXECUTABLE
-        NAMES ${_Python_NAMES}
-        PATHS [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]
-        )
-    endforeach()
-endif()
-
-# determine python version string
-if(PYTHON_EXECUTABLE)
-    execute_process(COMMAND "${PYTHON_EXECUTABLE}" -c
-                            "import sys; sys.stdout.write(';'.join([str(x) for x in sys.version_info[:3]]))"
-                    OUTPUT_VARIABLE _VERSION
-                    RESULT_VARIABLE _PYTHON_VERSION_RESULT
-                    ERROR_QUIET)
-    if(NOT _PYTHON_VERSION_RESULT)
-        string(REPLACE ";" "." PYTHON_VERSION_STRING "${_VERSION}")
-        list(GET _VERSION 0 PYTHON_VERSION_MAJOR)
-        list(GET _VERSION 1 PYTHON_VERSION_MINOR)
-        list(GET _VERSION 2 PYTHON_VERSION_PATCH)
-        if(PYTHON_VERSION_PATCH EQUAL 0)
-            # it's called "Python 2.7", not "2.7.0"
-            string(REGEX REPLACE "\\.0$" "" PYTHON_VERSION_STRING "${PYTHON_VERSION_STRING}")
-        endif()
-    else()
-        # sys.version predates sys.version_info, so use that
-        execute_process(COMMAND "${PYTHON_EXECUTABLE}" -c "import sys; sys.stdout.write(sys.version)"
-                        OUTPUT_VARIABLE _VERSION
-                        RESULT_VARIABLE _PYTHON_VERSION_RESULT
-                        ERROR_QUIET)
-        if(NOT _PYTHON_VERSION_RESULT)
-            string(REGEX REPLACE " .*" "" PYTHON_VERSION_STRING "${_VERSION}")
-            string(REGEX REPLACE "^([0-9]+)\\.[0-9]+.*" "\\1" PYTHON_VERSION_MAJOR "${PYTHON_VERSION_STRING}")
-            string(REGEX REPLACE "^[0-9]+\\.([0-9])+.*" "\\1" PYTHON_VERSION_MINOR "${PYTHON_VERSION_STRING}")
-            if(PYTHON_VERSION_STRING MATCHES "^[0-9]+\\.[0-9]+\\.([0-9]+)")
-                set(PYTHON_VERSION_PATCH "${CMAKE_MATCH_1}")
-            else()
-                set(PYTHON_VERSION_PATCH "0")
-            endif()
-        else()
-            # sys.version was first documented for Python 1.5, so assume
-            # this is older.
-            set(PYTHON_VERSION_STRING "1.4")
-            set(PYTHON_VERSION_MAJOR "1")
-            set(PYTHON_VERSION_MINOR "4")
-            set(PYTHON_VERSION_PATCH "0")
-        endif()
-    endif()
-    unset(_PYTHON_VERSION_RESULT)
-    unset(_VERSION)
-endif()
-
-# handle the QUIETLY and REQUIRED arguments and set PYTHONINTERP_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(PythonInterp REQUIRED_VARS PYTHON_EXECUTABLE VERSION_VAR PYTHON_VERSION_STRING)
-
-mark_as_advanced(PYTHON_EXECUTABLE)
diff --git a/share/cmake-3.2/Modules/FindPythonLibs.cmake b/share/cmake-3.2/Modules/FindPythonLibs.cmake
deleted file mode 100644
index cc875ad..0000000
--- a/share/cmake-3.2/Modules/FindPythonLibs.cmake
+++ /dev/null
@@ -1,294 +0,0 @@
-#.rst:
-# FindPythonLibs
-# --------------
-#
-# Find python libraries
-#
-# This module finds if Python is installed and determines where the
-# include files and libraries are.  It also determines what the name of
-# the library is.  This code sets the following variables:
-#
-# ::
-#
-#   PYTHONLIBS_FOUND           - have the Python libs been found
-#   PYTHON_LIBRARIES           - path to the python library
-#   PYTHON_INCLUDE_PATH        - path to where Python.h is found (deprecated)
-#   PYTHON_INCLUDE_DIRS        - path to where Python.h is found
-#   PYTHON_DEBUG_LIBRARIES     - path to the debug library (deprecated)
-#   PYTHONLIBS_VERSION_STRING  - version of the Python libs found (since CMake 2.8.8)
-#
-#
-#
-# The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
-# of version numbers that should be taken into account when searching
-# for Python.  You need to set this variable before calling
-# find_package(PythonLibs).
-#
-# If you'd like to specify the installation of Python to use, you should
-# modify the following cache variables:
-#
-# ::
-#
-#   PYTHON_LIBRARY             - path to the python library
-#   PYTHON_INCLUDE_DIR         - path to where Python.h is found
-#
-# If also calling find_package(PythonInterp), call find_package(PythonInterp)
-# first to get the currently active Python version by default with a consistent
-# version of PYTHON_LIBRARIES.
-
-#=============================================================================
-# Copyright 2001-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindFrameworks.cmake)
-# Search for the python framework on Apple.
-CMAKE_FIND_FRAMEWORKS(Python)
-
-set(_PYTHON1_VERSIONS 1.6 1.5)
-set(_PYTHON2_VERSIONS 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0)
-set(_PYTHON3_VERSIONS 3.4 3.3 3.2 3.1 3.0)
-
-if(PythonLibs_FIND_VERSION)
-    if(PythonLibs_FIND_VERSION_COUNT GREATER 1)
-        set(_PYTHON_FIND_MAJ_MIN "${PythonLibs_FIND_VERSION_MAJOR}.${PythonLibs_FIND_VERSION_MINOR}")
-        unset(_PYTHON_FIND_OTHER_VERSIONS)
-        if(PythonLibs_FIND_VERSION_EXACT)
-            if(_PYTHON_FIND_MAJ_MIN STREQUAL PythonLibs_FIND_VERSION)
-                set(_PYTHON_FIND_OTHER_VERSIONS "${PythonLibs_FIND_VERSION}")
-            else()
-                set(_PYTHON_FIND_OTHER_VERSIONS "${PythonLibs_FIND_VERSION}" "${_PYTHON_FIND_MAJ_MIN}")
-            endif()
-        else()
-            foreach(_PYTHON_V ${_PYTHON${PythonLibs_FIND_VERSION_MAJOR}_VERSIONS})
-                if(NOT _PYTHON_V VERSION_LESS _PYTHON_FIND_MAJ_MIN)
-                    list(APPEND _PYTHON_FIND_OTHER_VERSIONS ${_PYTHON_V})
-                endif()
-             endforeach()
-        endif()
-        unset(_PYTHON_FIND_MAJ_MIN)
-    else()
-        set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON${PythonLibs_FIND_VERSION_MAJOR}_VERSIONS})
-    endif()
-else()
-    set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON3_VERSIONS} ${_PYTHON2_VERSIONS} ${_PYTHON1_VERSIONS})
-endif()
-
-# Set up the versions we know about, in the order we will search. Always add
-# the user supplied additional versions to the front.
-# If FindPythonInterp has already found the major and minor version,
-# insert that version between the user supplied versions and the stock
-# version list.
-set(_Python_VERSIONS ${Python_ADDITIONAL_VERSIONS})
-if(DEFINED PYTHON_VERSION_MAJOR AND DEFINED PYTHON_VERSION_MINOR)
-  list(APPEND _Python_VERSIONS ${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR})
-endif()
-list(APPEND _Python_VERSIONS ${_PYTHON_FIND_OTHER_VERSIONS})
-
-unset(_PYTHON_FIND_OTHER_VERSIONS)
-unset(_PYTHON1_VERSIONS)
-unset(_PYTHON2_VERSIONS)
-unset(_PYTHON3_VERSIONS)
-
-foreach(_CURRENT_VERSION ${_Python_VERSIONS})
-  string(REPLACE "." "" _CURRENT_VERSION_NO_DOTS ${_CURRENT_VERSION})
-  if(WIN32)
-    find_library(PYTHON_DEBUG_LIBRARY
-      NAMES python${_CURRENT_VERSION_NO_DOTS}_d python
-      PATHS
-      [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs/Debug
-      [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs/Debug
-      [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
-      [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
-      )
-  endif()
-
-  find_library(PYTHON_LIBRARY
-    NAMES
-    python${_CURRENT_VERSION_NO_DOTS}
-    python${_CURRENT_VERSION}mu
-    python${_CURRENT_VERSION}m
-    python${_CURRENT_VERSION}u
-    python${_CURRENT_VERSION}
-    PATHS
-      [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
-      [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
-    # Avoid finding the .dll in the PATH.  We want the .lib.
-    NO_SYSTEM_ENVIRONMENT_PATH
-  )
-  # Look for the static library in the Python config directory
-  find_library(PYTHON_LIBRARY
-    NAMES python${_CURRENT_VERSION_NO_DOTS} python${_CURRENT_VERSION}
-    # Avoid finding the .dll in the PATH.  We want the .lib.
-    NO_SYSTEM_ENVIRONMENT_PATH
-    # This is where the static library is usually located
-    PATH_SUFFIXES python${_CURRENT_VERSION}/config
-  )
-
-  # For backward compatibility, honour value of PYTHON_INCLUDE_PATH, if
-  # PYTHON_INCLUDE_DIR is not set.
-  if(DEFINED PYTHON_INCLUDE_PATH AND NOT DEFINED PYTHON_INCLUDE_DIR)
-    set(PYTHON_INCLUDE_DIR "${PYTHON_INCLUDE_PATH}" CACHE PATH
-      "Path to where Python.h is found" FORCE)
-  endif()
-
-  set(PYTHON_FRAMEWORK_INCLUDES)
-  if(Python_FRAMEWORKS AND NOT PYTHON_INCLUDE_DIR)
-    foreach(dir ${Python_FRAMEWORKS})
-      set(PYTHON_FRAMEWORK_INCLUDES ${PYTHON_FRAMEWORK_INCLUDES}
-        ${dir}/Versions/${_CURRENT_VERSION}/include/python${_CURRENT_VERSION})
-    endforeach()
-  endif()
-
-  find_path(PYTHON_INCLUDE_DIR
-    NAMES Python.h
-    PATHS
-      ${PYTHON_FRAMEWORK_INCLUDES}
-      [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/include
-      [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/include
-    PATH_SUFFIXES
-      python${_CURRENT_VERSION}mu
-      python${_CURRENT_VERSION}m
-      python${_CURRENT_VERSION}u
-      python${_CURRENT_VERSION}
-  )
-
-  # For backward compatibility, set PYTHON_INCLUDE_PATH.
-  set(PYTHON_INCLUDE_PATH "${PYTHON_INCLUDE_DIR}")
-
-  if(PYTHON_INCLUDE_DIR AND EXISTS "${PYTHON_INCLUDE_DIR}/patchlevel.h")
-    file(STRINGS "${PYTHON_INCLUDE_DIR}/patchlevel.h" python_version_str
-         REGEX "^#define[ \t]+PY_VERSION[ \t]+\"[^\"]+\"")
-    string(REGEX REPLACE "^#define[ \t]+PY_VERSION[ \t]+\"([^\"]+)\".*" "\\1"
-                         PYTHONLIBS_VERSION_STRING "${python_version_str}")
-    unset(python_version_str)
-  endif()
-
-  if(PYTHON_LIBRARY AND PYTHON_INCLUDE_DIR)
-    break()
-  endif()
-endforeach()
-
-mark_as_advanced(
-  PYTHON_DEBUG_LIBRARY
-  PYTHON_LIBRARY
-  PYTHON_INCLUDE_DIR
-)
-
-# We use PYTHON_INCLUDE_DIR, PYTHON_LIBRARY and PYTHON_DEBUG_LIBRARY for the
-# cache entries because they are meant to specify the location of a single
-# library. We now set the variables listed by the documentation for this
-# module.
-set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
-set(PYTHON_DEBUG_LIBRARIES "${PYTHON_DEBUG_LIBRARY}")
-
-# These variables have been historically named in this module different from
-# what SELECT_LIBRARY_CONFIGURATIONS() expects.
-set(PYTHON_LIBRARY_DEBUG "${PYTHON_DEBUG_LIBRARY}")
-set(PYTHON_LIBRARY_RELEASE "${PYTHON_LIBRARY}")
-include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
-SELECT_LIBRARY_CONFIGURATIONS(PYTHON)
-# SELECT_LIBRARY_CONFIGURATIONS() sets ${PREFIX}_FOUND if it has a library.
-# Unset this, this prefix doesn't match the module prefix, they are different
-# for historical reasons.
-unset(PYTHON_FOUND)
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(PythonLibs
-                                  REQUIRED_VARS PYTHON_LIBRARIES PYTHON_INCLUDE_DIRS
-                                  VERSION_VAR PYTHONLIBS_VERSION_STRING)
-
-# PYTHON_ADD_MODULE(<name> src1 src2 ... srcN) is used to build modules for python.
-# PYTHON_WRITE_MODULES_HEADER(<filename>) writes a header file you can include
-# in your sources to initialize the static python modules
-function(PYTHON_ADD_MODULE _NAME )
-  get_property(_TARGET_SUPPORTS_SHARED_LIBS
-    GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS)
-  option(PYTHON_ENABLE_MODULE_${_NAME} "Add module ${_NAME}" TRUE)
-  option(PYTHON_MODULE_${_NAME}_BUILD_SHARED
-    "Add module ${_NAME} shared" ${_TARGET_SUPPORTS_SHARED_LIBS})
-
-  # Mark these options as advanced
-  mark_as_advanced(PYTHON_ENABLE_MODULE_${_NAME}
-    PYTHON_MODULE_${_NAME}_BUILD_SHARED)
-
-  if(PYTHON_ENABLE_MODULE_${_NAME})
-    if(PYTHON_MODULE_${_NAME}_BUILD_SHARED)
-      set(PY_MODULE_TYPE MODULE)
-    else()
-      set(PY_MODULE_TYPE STATIC)
-      set_property(GLOBAL  APPEND  PROPERTY  PY_STATIC_MODULES_LIST ${_NAME})
-    endif()
-
-    set_property(GLOBAL  APPEND  PROPERTY  PY_MODULES_LIST ${_NAME})
-    add_library(${_NAME} ${PY_MODULE_TYPE} ${ARGN})
-#    target_link_libraries(${_NAME} ${PYTHON_LIBRARIES})
-
-    if(PYTHON_MODULE_${_NAME}_BUILD_SHARED)
-      set_target_properties(${_NAME} PROPERTIES PREFIX "${PYTHON_MODULE_PREFIX}")
-      if(WIN32 AND NOT CYGWIN)
-        set_target_properties(${_NAME} PROPERTIES SUFFIX ".pyd")
-      endif()
-    endif()
-
-  endif()
-endfunction()
-
-function(PYTHON_WRITE_MODULES_HEADER _filename)
-
-  get_property(PY_STATIC_MODULES_LIST  GLOBAL  PROPERTY PY_STATIC_MODULES_LIST)
-
-  get_filename_component(_name "${_filename}" NAME)
-  string(REPLACE "." "_" _name "${_name}")
-  string(TOUPPER ${_name} _nameUpper)
-  set(_filename ${CMAKE_CURRENT_BINARY_DIR}/${_filename})
-
-  set(_filenameTmp "${_filename}.in")
-  file(WRITE ${_filenameTmp} "/*Created by cmake, do not edit, changes will be lost*/\n")
-  file(APPEND ${_filenameTmp}
-"#ifndef ${_nameUpper}
-#define ${_nameUpper}
-
-#include <Python.h>
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif /* __cplusplus */
-
-")
-
-  foreach(_currentModule ${PY_STATIC_MODULES_LIST})
-    file(APPEND ${_filenameTmp} "extern void init${PYTHON_MODULE_PREFIX}${_currentModule}(void);\n\n")
-  endforeach()
-
-  file(APPEND ${_filenameTmp}
-"#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-")
-
-
-  foreach(_currentModule ${PY_STATIC_MODULES_LIST})
-    file(APPEND ${_filenameTmp} "int ${_name}_${_currentModule}(void) \n{\n  static char name[]=\"${PYTHON_MODULE_PREFIX}${_currentModule}\"; return PyImport_AppendInittab(name, init${PYTHON_MODULE_PREFIX}${_currentModule});\n}\n\n")
-  endforeach()
-
-  file(APPEND ${_filenameTmp} "void ${_name}_LoadAllPythonModules(void)\n{\n")
-  foreach(_currentModule ${PY_STATIC_MODULES_LIST})
-    file(APPEND ${_filenameTmp} "  ${_name}_${_currentModule}();\n")
-  endforeach()
-  file(APPEND ${_filenameTmp} "}\n\n")
-  file(APPEND ${_filenameTmp} "#ifndef EXCLUDE_LOAD_ALL_FUNCTION\nvoid CMakeLoadAllPythonModules(void)\n{\n  ${_name}_LoadAllPythonModules();\n}\n#endif\n\n#endif\n")
-
-# with configure_file() cmake complains that you may not use a file created using file(WRITE) as input file for configure_file()
-  execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different "${_filenameTmp}" "${_filename}" OUTPUT_QUIET ERROR_QUIET)
-
-endfunction()
diff --git a/share/cmake-3.2/Modules/FindRuby.cmake b/share/cmake-3.2/Modules/FindRuby.cmake
deleted file mode 100644
index 4be16c9..0000000
--- a/share/cmake-3.2/Modules/FindRuby.cmake
+++ /dev/null
@@ -1,281 +0,0 @@
-#.rst:
-# FindRuby
-# --------
-#
-# Find Ruby
-#
-# This module finds if Ruby is installed and determines where the
-# include files and libraries are.  Ruby 1.8, 1.9, 2.0 and 2.1 are
-# supported.
-#
-# The minimum required version of Ruby can be specified using the
-# standard syntax, e.g.  find_package(Ruby 1.8)
-#
-# It also determines what the name of the library is.  This code sets
-# the following variables:
-#
-# ``RUBY_EXECUTABLE``
-#   full path to the ruby binary
-# ``RUBY_INCLUDE_DIRS``
-#   include dirs to be used when using the ruby library
-# ``RUBY_LIBRARY``
-#   full path to the ruby library
-# ``RUBY_VERSION``
-#   the version of ruby which was found, e.g. "1.8.7"
-# ``RUBY_FOUND``
-#   set to true if ruby ws found successfully
-#
-# Also:
-#
-# ``RUBY_INCLUDE_PATH``
-#   same as RUBY_INCLUDE_DIRS, only provided for compatibility reasons, don't use it
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-# Copyright 2008-2009 Alexander Neundorf <neundorf@kde.org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#   RUBY_ARCHDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"archdir"@:>@)'`
-#   RUBY_SITEARCHDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"sitearchdir"@:>@)'`
-#   RUBY_SITEDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"sitelibdir"@:>@)'`
-#   RUBY_LIBDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"libdir"@:>@)'`
-#   RUBY_LIBRUBYARG=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"LIBRUBYARG_SHARED"@:>@)'`
-
-# uncomment the following line to get debug output for this file
-# set(_RUBY_DEBUG_OUTPUT TRUE)
-
-# Determine the list of possible names of the ruby executable depending
-# on which version of ruby is required
-set(_RUBY_POSSIBLE_EXECUTABLE_NAMES ruby)
-
-# if 1.9 is required, don't look for ruby18 and ruby1.8, default to version 1.8
-if(DEFINED Ruby_FIND_VERSION_MAJOR AND DEFINED Ruby_FIND_VERSION_MINOR)
-   set(Ruby_FIND_VERSION_SHORT_NODOT "${Ruby_FIND_VERSION_MAJOR}${RUBY_FIND_VERSION_MINOR}")
-   # we can't construct that if only major version is given
-   set(_RUBY_POSSIBLE_EXECUTABLE_NAMES
-       ruby${Ruby_FIND_VERSION_MAJOR}.${Ruby_FIND_VERSION_MINOR}
-       ruby${Ruby_FIND_VERSION_MAJOR}${Ruby_FIND_VERSION_MINOR}
-       ${_RUBY_POSSIBLE_EXECUTABLE_NAMES})
-else()
-   set(Ruby_FIND_VERSION_SHORT_NODOT "18")
-endif()
-
-if(NOT Ruby_FIND_VERSION_EXACT)
-  list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby2.1 ruby21)
-  list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby2.0 ruby20)
-  list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby1.9 ruby19)
-
-  # if we want a version below 1.9, also look for ruby 1.8
-  if("${Ruby_FIND_VERSION_SHORT_NODOT}" VERSION_LESS "19")
-    list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby1.8 ruby18)
-  endif()
-
-  list(REMOVE_DUPLICATES _RUBY_POSSIBLE_EXECUTABLE_NAMES)
-endif()
-
-find_program(RUBY_EXECUTABLE NAMES ${_RUBY_POSSIBLE_EXECUTABLE_NAMES})
-
-if(RUBY_EXECUTABLE  AND NOT  RUBY_VERSION_MAJOR)
-  function(_RUBY_CONFIG_VAR RBVAR OUTVAR)
-    execute_process(COMMAND ${RUBY_EXECUTABLE} -r rbconfig -e "print RbConfig::CONFIG['${RBVAR}']"
-      RESULT_VARIABLE _RUBY_SUCCESS
-      OUTPUT_VARIABLE _RUBY_OUTPUT
-      ERROR_QUIET)
-    if(_RUBY_SUCCESS OR _RUBY_OUTPUT STREQUAL "")
-      execute_process(COMMAND ${RUBY_EXECUTABLE} -r rbconfig -e "print Config::CONFIG['${RBVAR}']"
-        RESULT_VARIABLE _RUBY_SUCCESS
-        OUTPUT_VARIABLE _RUBY_OUTPUT
-        ERROR_QUIET)
-    endif()
-    set(${OUTVAR} "${_RUBY_OUTPUT}" PARENT_SCOPE)
-  endfunction()
-
-
-  # query the ruby version
-   _RUBY_CONFIG_VAR("MAJOR" RUBY_VERSION_MAJOR)
-   _RUBY_CONFIG_VAR("MINOR" RUBY_VERSION_MINOR)
-   _RUBY_CONFIG_VAR("TEENY" RUBY_VERSION_PATCH)
-
-   # query the different directories
-   _RUBY_CONFIG_VAR("archdir" RUBY_ARCH_DIR)
-   _RUBY_CONFIG_VAR("arch" RUBY_ARCH)
-   _RUBY_CONFIG_VAR("rubyhdrdir" RUBY_HDR_DIR)
-   _RUBY_CONFIG_VAR("rubyarchhdrdir" RUBY_ARCHHDR_DIR)
-   _RUBY_CONFIG_VAR("libdir" RUBY_POSSIBLE_LIB_DIR)
-   _RUBY_CONFIG_VAR("rubylibdir" RUBY_RUBY_LIB_DIR)
-
-   # site_ruby
-   _RUBY_CONFIG_VAR("sitearchdir" RUBY_SITEARCH_DIR)
-   _RUBY_CONFIG_VAR("sitelibdir" RUBY_SITELIB_DIR)
-
-   # vendor_ruby available ?
-   execute_process(COMMAND ${RUBY_EXECUTABLE} -r vendor-specific -e "print 'true'"
-      OUTPUT_VARIABLE RUBY_HAS_VENDOR_RUBY  ERROR_QUIET)
-
-   if(RUBY_HAS_VENDOR_RUBY)
-      _RUBY_CONFIG_VAR("vendorlibdir" RUBY_VENDORLIB_DIR)
-      _RUBY_CONFIG_VAR("vendorarchdir" RUBY_VENDORARCH_DIR)
-   endif()
-
-   # save the results in the cache so we don't have to run ruby the next time again
-   set(RUBY_VERSION_MAJOR    ${RUBY_VERSION_MAJOR}    CACHE PATH "The Ruby major version" FORCE)
-   set(RUBY_VERSION_MINOR    ${RUBY_VERSION_MINOR}    CACHE PATH "The Ruby minor version" FORCE)
-   set(RUBY_VERSION_PATCH    ${RUBY_VERSION_PATCH}    CACHE PATH "The Ruby patch version" FORCE)
-   set(RUBY_ARCH_DIR         ${RUBY_ARCH_DIR}         CACHE PATH "The Ruby arch dir" FORCE)
-   set(RUBY_HDR_DIR          ${RUBY_HDR_DIR}          CACHE PATH "The Ruby header dir (1.9+)" FORCE)
-   set(RUBY_ARCHHDR_DIR      ${RUBY_ARCHHDR_DIR}      CACHE PATH "The Ruby arch header dir (2.0+)" FORCE)
-   set(RUBY_POSSIBLE_LIB_DIR ${RUBY_POSSIBLE_LIB_DIR} CACHE PATH "The Ruby lib dir" FORCE)
-   set(RUBY_RUBY_LIB_DIR     ${RUBY_RUBY_LIB_DIR}     CACHE PATH "The Ruby ruby-lib dir" FORCE)
-   set(RUBY_SITEARCH_DIR     ${RUBY_SITEARCH_DIR}     CACHE PATH "The Ruby site arch dir" FORCE)
-   set(RUBY_SITELIB_DIR      ${RUBY_SITELIB_DIR}      CACHE PATH "The Ruby site lib dir" FORCE)
-   set(RUBY_HAS_VENDOR_RUBY  ${RUBY_HAS_VENDOR_RUBY}  CACHE BOOL "Vendor Ruby is available" FORCE)
-   set(RUBY_VENDORARCH_DIR   ${RUBY_VENDORARCH_DIR}   CACHE PATH "The Ruby vendor arch dir" FORCE)
-   set(RUBY_VENDORLIB_DIR    ${RUBY_VENDORLIB_DIR}    CACHE PATH "The Ruby vendor lib dir" FORCE)
-
-   mark_as_advanced(
-     RUBY_ARCH_DIR
-     RUBY_ARCH
-     RUBY_HDR_DIR
-     RUBY_ARCHHDR_DIR
-     RUBY_POSSIBLE_LIB_DIR
-     RUBY_RUBY_LIB_DIR
-     RUBY_SITEARCH_DIR
-     RUBY_SITELIB_DIR
-     RUBY_HAS_VENDOR_RUBY
-     RUBY_VENDORARCH_DIR
-     RUBY_VENDORLIB_DIR
-     RUBY_VERSION_MAJOR
-     RUBY_VERSION_MINOR
-     RUBY_VERSION_PATCH
-     )
-endif()
-
-# In case RUBY_EXECUTABLE could not be executed (e.g. cross compiling)
-# try to detect which version we found. This is not too good.
-if(RUBY_EXECUTABLE AND NOT RUBY_VERSION_MAJOR)
-   # by default assume 1.8.0
-   set(RUBY_VERSION_MAJOR 1)
-   set(RUBY_VERSION_MINOR 8)
-   set(RUBY_VERSION_PATCH 0)
-   # check whether we found 1.9.x
-   if(${RUBY_EXECUTABLE} MATCHES "ruby1.?9")
-      set(RUBY_VERSION_MAJOR 1)
-      set(RUBY_VERSION_MINOR 9)
-   endif()
-   # check whether we found 2.0.x
-   if(${RUBY_EXECUTABLE} MATCHES "ruby2.?0")
-      set(RUBY_VERSION_MAJOR 2)
-      set(RUBY_VERSION_MINOR 0)
-   endif()
-   # check whether we found 2.1.x
-   if(${RUBY_EXECUTABLE} MATCHES "ruby2.?1")
-      set(RUBY_VERSION_MAJOR 2)
-      set(RUBY_VERSION_MINOR 1)
-   endif()
-endif()
-
-if(RUBY_VERSION_MAJOR)
-   set(RUBY_VERSION "${RUBY_VERSION_MAJOR}.${RUBY_VERSION_MINOR}.${RUBY_VERSION_PATCH}")
-   set(_RUBY_VERSION_SHORT "${RUBY_VERSION_MAJOR}.${RUBY_VERSION_MINOR}")
-   set(_RUBY_VERSION_SHORT_NODOT "${RUBY_VERSION_MAJOR}${RUBY_VERSION_MINOR}")
-   set(_RUBY_NODOT_VERSION "${RUBY_VERSION_MAJOR}${RUBY_VERSION_MINOR}${RUBY_VERSION_PATCH}")
-endif()
-
-find_path(RUBY_INCLUDE_DIR
-   NAMES ruby.h
-   HINTS
-   ${RUBY_HDR_DIR}
-   ${RUBY_ARCH_DIR}
-   /usr/lib/ruby/${_RUBY_VERSION_SHORT}/i586-linux-gnu/ )
-
-set(RUBY_INCLUDE_DIRS ${RUBY_INCLUDE_DIR} )
-
-# if ruby > 1.8 is required or if ruby > 1.8 was found, search for the config.h dir
-if( "${Ruby_FIND_VERSION_SHORT_NODOT}" GREATER 18  OR  "${_RUBY_VERSION_SHORT_NODOT}" GREATER 18  OR  RUBY_HDR_DIR)
-   find_path(RUBY_CONFIG_INCLUDE_DIR
-     NAMES ruby/config.h  config.h
-     HINTS
-     ${RUBY_HDR_DIR}/${RUBY_ARCH}
-     ${RUBY_ARCH_DIR}
-     ${RUBY_ARCHHDR_DIR}
-     )
-
-   set(RUBY_INCLUDE_DIRS ${RUBY_INCLUDE_DIRS} ${RUBY_CONFIG_INCLUDE_DIR} )
-endif()
-
-
-# Determine the list of possible names for the ruby library
-set(_RUBY_POSSIBLE_LIB_NAMES ruby ruby-static ruby${_RUBY_VERSION_SHORT} ruby${_RUBY_VERSION_SHORT_NODOT} ruby-${_RUBY_VERSION_SHORT} ruby-${RUBY_VERSION})
-
-if(WIN32)
-   set( _RUBY_MSVC_RUNTIME "" )
-   if( MSVC60 )
-     set( _RUBY_MSVC_RUNTIME "60" )
-   endif()
-   if( MSVC70 )
-     set( _RUBY_MSVC_RUNTIME "70" )
-   endif()
-   if( MSVC71 )
-     set( _RUBY_MSVC_RUNTIME "71" )
-   endif()
-   if( MSVC80 )
-     set( _RUBY_MSVC_RUNTIME "80" )
-   endif()
-   if( MSVC90 )
-     set( _RUBY_MSVC_RUNTIME "90" )
-   endif()
-
-   list(APPEND _RUBY_POSSIBLE_LIB_NAMES
-               "msvcr${_RUBY_MSVC_RUNTIME}-ruby${_RUBY_NODOT_VERSION}"
-               "msvcr${_RUBY_MSVC_RUNTIME}-ruby${_RUBY_NODOT_VERSION}-static"
-               "msvcrt-ruby${_RUBY_NODOT_VERSION}"
-               "msvcrt-ruby${_RUBY_NODOT_VERSION}-static" )
-endif()
-
-find_library(RUBY_LIBRARY NAMES ${_RUBY_POSSIBLE_LIB_NAMES} HINTS ${RUBY_POSSIBLE_LIB_DIR} )
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-set(_RUBY_REQUIRED_VARS RUBY_EXECUTABLE RUBY_INCLUDE_DIR RUBY_LIBRARY)
-if(_RUBY_VERSION_SHORT_NODOT GREATER 18)
-   list(APPEND _RUBY_REQUIRED_VARS RUBY_CONFIG_INCLUDE_DIR)
-endif()
-
-if(_RUBY_DEBUG_OUTPUT)
-   message(STATUS "--------FindRuby.cmake debug------------")
-   message(STATUS "_RUBY_POSSIBLE_EXECUTABLE_NAMES: ${_RUBY_POSSIBLE_EXECUTABLE_NAMES}")
-   message(STATUS "_RUBY_POSSIBLE_LIB_NAMES: ${_RUBY_POSSIBLE_LIB_NAMES}")
-   message(STATUS "RUBY_ARCH_DIR: ${RUBY_ARCH_DIR}")
-   message(STATUS "RUBY_HDR_DIR: ${RUBY_HDR_DIR}")
-   message(STATUS "RUBY_POSSIBLE_LIB_DIR: ${RUBY_POSSIBLE_LIB_DIR}")
-   message(STATUS "Found RUBY_VERSION: \"${RUBY_VERSION}\" , short: \"${_RUBY_VERSION_SHORT}\", nodot: \"${_RUBY_VERSION_SHORT_NODOT}\"")
-   message(STATUS "_RUBY_REQUIRED_VARS: ${_RUBY_REQUIRED_VARS}")
-   message(STATUS "RUBY_EXECUTABLE: ${RUBY_EXECUTABLE}")
-   message(STATUS "RUBY_LIBRARY: ${RUBY_LIBRARY}")
-   message(STATUS "RUBY_INCLUDE_DIR: ${RUBY_INCLUDE_DIR}")
-   message(STATUS "RUBY_CONFIG_INCLUDE_DIR: ${RUBY_CONFIG_INCLUDE_DIR}")
-   message(STATUS "--------------------")
-endif()
-
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Ruby  REQUIRED_VARS  ${_RUBY_REQUIRED_VARS}
-                                        VERSION_VAR RUBY_VERSION )
-
-mark_as_advanced(
-  RUBY_EXECUTABLE
-  RUBY_LIBRARY
-  RUBY_INCLUDE_DIR
-  RUBY_CONFIG_INCLUDE_DIR
-  )
-
-# Set some variables for compatibility with previous version of this file
-set(RUBY_POSSIBLE_LIB_PATH ${RUBY_POSSIBLE_LIB_DIR})
-set(RUBY_RUBY_LIB_PATH ${RUBY_RUBY_LIB_DIR})
-set(RUBY_INCLUDE_PATH ${RUBY_INCLUDE_DIRS})
diff --git a/share/cmake-3.2/Modules/FindSDL_image.cmake b/share/cmake-3.2/Modules/FindSDL_image.cmake
deleted file mode 100644
index 49b5e40..0000000
--- a/share/cmake-3.2/Modules/FindSDL_image.cmake
+++ /dev/null
@@ -1,111 +0,0 @@
-#.rst:
-# FindSDL_image
-# -------------
-#
-# Locate SDL_image library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_IMAGE_LIBRARIES, the name of the library to link against
-#   SDL_IMAGE_INCLUDE_DIRS, where to find the headers
-#   SDL_IMAGE_FOUND, if false, do not try to link against
-#   SDL_IMAGE_VERSION_STRING - human-readable string containing the
-#                              version of SDL_image
-#
-#
-#
-# For backward compatiblity the following variables are also set:
-#
-# ::
-#
-#   SDLIMAGE_LIBRARY (same value as SDL_IMAGE_LIBRARIES)
-#   SDLIMAGE_INCLUDE_DIR (same value as SDL_IMAGE_INCLUDE_DIRS)
-#   SDLIMAGE_FOUND (same value as SDL_IMAGE_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-# Copyright 2012 Benjamin Eikel
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(NOT SDL_IMAGE_INCLUDE_DIR AND SDLIMAGE_INCLUDE_DIR)
-  set(SDL_IMAGE_INCLUDE_DIR ${SDLIMAGE_INCLUDE_DIR} CACHE PATH "directory cache
-entry initialized from old variable name")
-endif()
-find_path(SDL_IMAGE_INCLUDE_DIR SDL_image.h
-  HINTS
-    ENV SDLIMAGEDIR
-    ENV SDLDIR
-  PATH_SUFFIXES SDL
-                # path suffixes to search inside ENV{SDLDIR}
-                include/SDL include/SDL12 include/SDL11 include
-)
-
-if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-  set(VC_LIB_PATH_SUFFIX lib/x64)
-else()
-  set(VC_LIB_PATH_SUFFIX lib/x86)
-endif()
-
-if(NOT SDL_IMAGE_LIBRARY AND SDLIMAGE_LIBRARY)
-  set(SDL_IMAGE_LIBRARY ${SDLIMAGE_LIBRARY} CACHE FILEPATH "file cache entry
-initialized from old variable name")
-endif()
-find_library(SDL_IMAGE_LIBRARY
-  NAMES SDL_image
-  HINTS
-    ENV SDLIMAGEDIR
-    ENV SDLDIR
-  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
-)
-
-if(SDL_IMAGE_INCLUDE_DIR AND EXISTS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h")
-  file(STRINGS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h" SDL_IMAGE_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_IMAGE_MAJOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h" SDL_IMAGE_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_IMAGE_MINOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h" SDL_IMAGE_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_IMAGE_PATCHLEVEL[ \t]+[0-9]+$")
-  string(REGEX REPLACE "^#define[ \t]+SDL_IMAGE_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_IMAGE_VERSION_MAJOR "${SDL_IMAGE_VERSION_MAJOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_IMAGE_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_IMAGE_VERSION_MINOR "${SDL_IMAGE_VERSION_MINOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_IMAGE_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_IMAGE_VERSION_PATCH "${SDL_IMAGE_VERSION_PATCH_LINE}")
-  set(SDL_IMAGE_VERSION_STRING ${SDL_IMAGE_VERSION_MAJOR}.${SDL_IMAGE_VERSION_MINOR}.${SDL_IMAGE_VERSION_PATCH})
-  unset(SDL_IMAGE_VERSION_MAJOR_LINE)
-  unset(SDL_IMAGE_VERSION_MINOR_LINE)
-  unset(SDL_IMAGE_VERSION_PATCH_LINE)
-  unset(SDL_IMAGE_VERSION_MAJOR)
-  unset(SDL_IMAGE_VERSION_MINOR)
-  unset(SDL_IMAGE_VERSION_PATCH)
-endif()
-
-set(SDL_IMAGE_LIBRARIES ${SDL_IMAGE_LIBRARY})
-set(SDL_IMAGE_INCLUDE_DIRS ${SDL_IMAGE_INCLUDE_DIR})
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_image
-                                  REQUIRED_VARS SDL_IMAGE_LIBRARIES SDL_IMAGE_INCLUDE_DIRS
-                                  VERSION_VAR SDL_IMAGE_VERSION_STRING)
-
-# for backward compatiblity
-set(SDLIMAGE_LIBRARY ${SDL_IMAGE_LIBRARIES})
-set(SDLIMAGE_INCLUDE_DIR ${SDL_IMAGE_INCLUDE_DIRS})
-set(SDLIMAGE_FOUND ${SDL_IMAGE_FOUND})
-
-mark_as_advanced(SDL_IMAGE_LIBRARY SDL_IMAGE_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindSDL_mixer.cmake b/share/cmake-3.2/Modules/FindSDL_mixer.cmake
deleted file mode 100644
index 9e11796..0000000
--- a/share/cmake-3.2/Modules/FindSDL_mixer.cmake
+++ /dev/null
@@ -1,111 +0,0 @@
-#.rst:
-# FindSDL_mixer
-# -------------
-#
-# Locate SDL_mixer library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_MIXER_LIBRARIES, the name of the library to link against
-#   SDL_MIXER_INCLUDE_DIRS, where to find the headers
-#   SDL_MIXER_FOUND, if false, do not try to link against
-#   SDL_MIXER_VERSION_STRING - human-readable string containing the
-#                              version of SDL_mixer
-#
-#
-#
-# For backward compatiblity the following variables are also set:
-#
-# ::
-#
-#   SDLMIXER_LIBRARY (same value as SDL_MIXER_LIBRARIES)
-#   SDLMIXER_INCLUDE_DIR (same value as SDL_MIXER_INCLUDE_DIRS)
-#   SDLMIXER_FOUND (same value as SDL_MIXER_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-# Copyright 2012 Benjamin Eikel
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(NOT SDL_MIXER_INCLUDE_DIR AND SDLMIXER_INCLUDE_DIR)
-  set(SDL_MIXER_INCLUDE_DIR ${SDLMIXER_INCLUDE_DIR} CACHE PATH "directory cache
-entry initialized from old variable name")
-endif()
-find_path(SDL_MIXER_INCLUDE_DIR SDL_mixer.h
-  HINTS
-    ENV SDLMIXERDIR
-    ENV SDLDIR
-  PATH_SUFFIXES SDL
-                # path suffixes to search inside ENV{SDLDIR}
-                include/SDL include/SDL12 include/SDL11 include
-)
-
-if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-  set(VC_LIB_PATH_SUFFIX lib/x64)
-else()
-  set(VC_LIB_PATH_SUFFIX lib/x86)
-endif()
-
-if(NOT SDL_MIXER_LIBRARY AND SDLMIXER_LIBRARY)
-  set(SDL_MIXER_LIBRARY ${SDLMIXER_LIBRARY} CACHE FILEPATH "file cache entry
-initialized from old variable name")
-endif()
-find_library(SDL_MIXER_LIBRARY
-  NAMES SDL_mixer
-  HINTS
-    ENV SDLMIXERDIR
-    ENV SDLDIR
-  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
-)
-
-if(SDL_MIXER_INCLUDE_DIR AND EXISTS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h")
-  file(STRINGS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h" SDL_MIXER_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_MIXER_MAJOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h" SDL_MIXER_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_MIXER_MINOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h" SDL_MIXER_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_MIXER_PATCHLEVEL[ \t]+[0-9]+$")
-  string(REGEX REPLACE "^#define[ \t]+SDL_MIXER_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_MIXER_VERSION_MAJOR "${SDL_MIXER_VERSION_MAJOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_MIXER_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_MIXER_VERSION_MINOR "${SDL_MIXER_VERSION_MINOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_MIXER_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_MIXER_VERSION_PATCH "${SDL_MIXER_VERSION_PATCH_LINE}")
-  set(SDL_MIXER_VERSION_STRING ${SDL_MIXER_VERSION_MAJOR}.${SDL_MIXER_VERSION_MINOR}.${SDL_MIXER_VERSION_PATCH})
-  unset(SDL_MIXER_VERSION_MAJOR_LINE)
-  unset(SDL_MIXER_VERSION_MINOR_LINE)
-  unset(SDL_MIXER_VERSION_PATCH_LINE)
-  unset(SDL_MIXER_VERSION_MAJOR)
-  unset(SDL_MIXER_VERSION_MINOR)
-  unset(SDL_MIXER_VERSION_PATCH)
-endif()
-
-set(SDL_MIXER_LIBRARIES ${SDL_MIXER_LIBRARY})
-set(SDL_MIXER_INCLUDE_DIRS ${SDL_MIXER_INCLUDE_DIR})
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_mixer
-                                  REQUIRED_VARS SDL_MIXER_LIBRARIES SDL_MIXER_INCLUDE_DIRS
-                                  VERSION_VAR SDL_MIXER_VERSION_STRING)
-
-# for backward compatiblity
-set(SDLMIXER_LIBRARY ${SDL_MIXER_LIBRARIES})
-set(SDLMIXER_INCLUDE_DIR ${SDL_MIXER_INCLUDE_DIRS})
-set(SDLMIXER_FOUND ${SDL_MIXER_FOUND})
-
-mark_as_advanced(SDL_MIXER_LIBRARY SDL_MIXER_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindSDL_net.cmake b/share/cmake-3.2/Modules/FindSDL_net.cmake
deleted file mode 100644
index ef23573..0000000
--- a/share/cmake-3.2/Modules/FindSDL_net.cmake
+++ /dev/null
@@ -1,110 +0,0 @@
-#.rst:
-# FindSDL_net
-# -----------
-#
-# Locate SDL_net library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_NET_LIBRARIES, the name of the library to link against
-#   SDL_NET_INCLUDE_DIRS, where to find the headers
-#   SDL_NET_FOUND, if false, do not try to link against
-#   SDL_NET_VERSION_STRING - human-readable string containing the version of SDL_net
-#
-#
-#
-# For backward compatiblity the following variables are also set:
-#
-# ::
-#
-#   SDLNET_LIBRARY (same value as SDL_NET_LIBRARIES)
-#   SDLNET_INCLUDE_DIR (same value as SDL_NET_INCLUDE_DIRS)
-#   SDLNET_FOUND (same value as SDL_NET_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-# Copyright 2012 Benjamin Eikel
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(NOT SDL_NET_INCLUDE_DIR AND SDLNET_INCLUDE_DIR)
-  set(SDL_NET_INCLUDE_DIR ${SDLNET_INCLUDE_DIR} CACHE PATH "directory cache
-entry initialized from old variable name")
-endif()
-find_path(SDL_NET_INCLUDE_DIR SDL_net.h
-  HINTS
-    ENV SDLNETDIR
-    ENV SDLDIR
-  PATH_SUFFIXES SDL
-                # path suffixes to search inside ENV{SDLDIR}
-                include/SDL include/SDL12 include/SDL11 include
-)
-
-if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-  set(VC_LIB_PATH_SUFFIX lib/x64)
-else()
-  set(VC_LIB_PATH_SUFFIX lib/x86)
-endif()
-
-if(NOT SDL_NET_LIBRARY AND SDLNET_LIBRARY)
-  set(SDL_NET_LIBRARY ${SDLNET_LIBRARY} CACHE FILEPATH "file cache entry
-initialized from old variable name")
-endif()
-find_library(SDL_NET_LIBRARY
-  NAMES SDL_net
-  HINTS
-    ENV SDLNETDIR
-    ENV SDLDIR
-  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
-)
-
-if(SDL_NET_INCLUDE_DIR AND EXISTS "${SDL_NET_INCLUDE_DIR}/SDL_net.h")
-  file(STRINGS "${SDL_NET_INCLUDE_DIR}/SDL_net.h" SDL_NET_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_NET_MAJOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_NET_INCLUDE_DIR}/SDL_net.h" SDL_NET_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_NET_MINOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_NET_INCLUDE_DIR}/SDL_net.h" SDL_NET_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_NET_PATCHLEVEL[ \t]+[0-9]+$")
-  string(REGEX REPLACE "^#define[ \t]+SDL_NET_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_NET_VERSION_MAJOR "${SDL_NET_VERSION_MAJOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_NET_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_NET_VERSION_MINOR "${SDL_NET_VERSION_MINOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_NET_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_NET_VERSION_PATCH "${SDL_NET_VERSION_PATCH_LINE}")
-  set(SDL_NET_VERSION_STRING ${SDL_NET_VERSION_MAJOR}.${SDL_NET_VERSION_MINOR}.${SDL_NET_VERSION_PATCH})
-  unset(SDL_NET_VERSION_MAJOR_LINE)
-  unset(SDL_NET_VERSION_MINOR_LINE)
-  unset(SDL_NET_VERSION_PATCH_LINE)
-  unset(SDL_NET_VERSION_MAJOR)
-  unset(SDL_NET_VERSION_MINOR)
-  unset(SDL_NET_VERSION_PATCH)
-endif()
-
-set(SDL_NET_LIBRARIES ${SDL_NET_LIBRARY})
-set(SDL_NET_INCLUDE_DIRS ${SDL_NET_INCLUDE_DIR})
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_net
-                                  REQUIRED_VARS SDL_NET_LIBRARIES SDL_NET_INCLUDE_DIRS
-                                  VERSION_VAR SDL_NET_VERSION_STRING)
-
-# for backward compatiblity
-set(SDLNET_LIBRARY ${SDL_NET_LIBRARIES})
-set(SDLNET_INCLUDE_DIR ${SDL_NET_INCLUDE_DIRS})
-set(SDLNET_FOUND ${SDL_NET_FOUND})
-
-mark_as_advanced(SDL_NET_LIBRARY SDL_NET_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindSDL_ttf.cmake b/share/cmake-3.2/Modules/FindSDL_ttf.cmake
deleted file mode 100644
index 4b527fa..0000000
--- a/share/cmake-3.2/Modules/FindSDL_ttf.cmake
+++ /dev/null
@@ -1,110 +0,0 @@
-#.rst:
-# FindSDL_ttf
-# -----------
-#
-# Locate SDL_ttf library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_TTF_LIBRARIES, the name of the library to link against
-#   SDL_TTF_INCLUDE_DIRS, where to find the headers
-#   SDL_TTF_FOUND, if false, do not try to link against
-#   SDL_TTF_VERSION_STRING - human-readable string containing the version of SDL_ttf
-#
-#
-#
-# For backward compatiblity the following variables are also set:
-#
-# ::
-#
-#   SDLTTF_LIBRARY (same value as SDL_TTF_LIBRARIES)
-#   SDLTTF_INCLUDE_DIR (same value as SDL_TTF_INCLUDE_DIRS)
-#   SDLTTF_FOUND (same value as SDL_TTF_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-# Copyright 2012 Benjamin Eikel
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(NOT SDL_TTF_INCLUDE_DIR AND SDLTTF_INCLUDE_DIR)
-  set(SDL_TTF_INCLUDE_DIR ${SDLTTF_INCLUDE_DIR} CACHE PATH "directory cache
-entry initialized from old variable name")
-endif()
-find_path(SDL_TTF_INCLUDE_DIR SDL_ttf.h
-  HINTS
-    ENV SDLTTFDIR
-    ENV SDLDIR
-  PATH_SUFFIXES SDL
-                # path suffixes to search inside ENV{SDLDIR}
-                include/SDL include/SDL12 include/SDL11 include
-)
-
-if(CMAKE_SIZEOF_VOID_P EQUAL 8)
-  set(VC_LIB_PATH_SUFFIX lib/x64)
-else()
-  set(VC_LIB_PATH_SUFFIX lib/x86)
-endif()
-
-if(NOT SDL_TTF_LIBRARY AND SDLTTF_LIBRARY)
-  set(SDL_TTF_LIBRARY ${SDLTTF_LIBRARY} CACHE FILEPATH "file cache entry
-initialized from old variable name")
-endif()
-find_library(SDL_TTF_LIBRARY
-  NAMES SDL_ttf
-  HINTS
-    ENV SDLTTFDIR
-    ENV SDLDIR
-  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
-)
-
-if(SDL_TTF_INCLUDE_DIR AND EXISTS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h")
-  file(STRINGS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h" SDL_TTF_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_TTF_MAJOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h" SDL_TTF_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_TTF_MINOR_VERSION[ \t]+[0-9]+$")
-  file(STRINGS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h" SDL_TTF_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_TTF_PATCHLEVEL[ \t]+[0-9]+$")
-  string(REGEX REPLACE "^#define[ \t]+SDL_TTF_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_TTF_VERSION_MAJOR "${SDL_TTF_VERSION_MAJOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_TTF_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_TTF_VERSION_MINOR "${SDL_TTF_VERSION_MINOR_LINE}")
-  string(REGEX REPLACE "^#define[ \t]+SDL_TTF_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_TTF_VERSION_PATCH "${SDL_TTF_VERSION_PATCH_LINE}")
-  set(SDL_TTF_VERSION_STRING ${SDL_TTF_VERSION_MAJOR}.${SDL_TTF_VERSION_MINOR}.${SDL_TTF_VERSION_PATCH})
-  unset(SDL_TTF_VERSION_MAJOR_LINE)
-  unset(SDL_TTF_VERSION_MINOR_LINE)
-  unset(SDL_TTF_VERSION_PATCH_LINE)
-  unset(SDL_TTF_VERSION_MAJOR)
-  unset(SDL_TTF_VERSION_MINOR)
-  unset(SDL_TTF_VERSION_PATCH)
-endif()
-
-set(SDL_TTF_LIBRARIES ${SDL_TTF_LIBRARY})
-set(SDL_TTF_INCLUDE_DIRS ${SDL_TTF_INCLUDE_DIR})
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_ttf
-                                  REQUIRED_VARS SDL_TTF_LIBRARIES SDL_TTF_INCLUDE_DIRS
-                                  VERSION_VAR SDL_TTF_VERSION_STRING)
-
-# for backward compatiblity
-set(SDLTTF_LIBRARY ${SDL_TTF_LIBRARIES})
-set(SDLTTF_INCLUDE_DIR ${SDL_TTF_INCLUDE_DIRS})
-set(SDLTTF_FOUND ${SDL_TTF_FOUND})
-
-mark_as_advanced(SDL_TTF_LIBRARY SDL_TTF_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindSubversion.cmake b/share/cmake-3.2/Modules/FindSubversion.cmake
deleted file mode 100644
index 0d13318..0000000
--- a/share/cmake-3.2/Modules/FindSubversion.cmake
+++ /dev/null
@@ -1,158 +0,0 @@
-#.rst:
-# FindSubversion
-# --------------
-#
-# Extract information from a subversion working copy
-#
-# The module defines the following variables:
-#
-# ::
-#
-#   Subversion_SVN_EXECUTABLE - path to svn command line client
-#   Subversion_VERSION_SVN - version of svn command line client
-#   Subversion_FOUND - true if the command line client was found
-#   SUBVERSION_FOUND - same as Subversion_FOUND, set for compatiblity reasons
-#
-#
-#
-# The minimum required version of Subversion can be specified using the
-# standard syntax, e.g.  find_package(Subversion 1.4)
-#
-# If the command line client executable is found two macros are defined:
-#
-# ::
-#
-#   Subversion_WC_INFO(<dir> <var-prefix>)
-#   Subversion_WC_LOG(<dir> <var-prefix>)
-#
-# Subversion_WC_INFO extracts information of a subversion working copy
-# at a given location.  This macro defines the following variables:
-#
-# ::
-#
-#   <var-prefix>_WC_URL - url of the repository (at <dir>)
-#   <var-prefix>_WC_ROOT - root url of the repository
-#   <var-prefix>_WC_REVISION - current revision
-#   <var-prefix>_WC_LAST_CHANGED_AUTHOR - author of last commit
-#   <var-prefix>_WC_LAST_CHANGED_DATE - date of last commit
-#   <var-prefix>_WC_LAST_CHANGED_REV - revision of last commit
-#   <var-prefix>_WC_INFO - output of command `svn info <dir>'
-#
-# Subversion_WC_LOG retrieves the log message of the base revision of a
-# subversion working copy at a given location.  This macro defines the
-# variable:
-#
-# ::
-#
-#   <var-prefix>_LAST_CHANGED_LOG - last log of base revision
-#
-# Example usage:
-#
-# ::
-#
-#   find_package(Subversion)
-#   if(SUBVERSION_FOUND)
-#     Subversion_WC_INFO(${PROJECT_SOURCE_DIR} Project)
-#     message("Current revision is ${Project_WC_REVISION}")
-#     Subversion_WC_LOG(${PROJECT_SOURCE_DIR} Project)
-#     message("Last changed log is ${Project_LAST_CHANGED_LOG}")
-#   endif()
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-# Copyright 2006 Tristan Carel
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-find_program(Subversion_SVN_EXECUTABLE svn
-  PATHS
-    [HKEY_LOCAL_MACHINE\\Software\\TortoiseSVN;Directory]/bin
-  DOC "subversion command line client")
-mark_as_advanced(Subversion_SVN_EXECUTABLE)
-
-if(Subversion_SVN_EXECUTABLE)
-  # the subversion commands should be executed with the C locale, otherwise
-  # the message (which are parsed) may be translated, Alex
-  set(_Subversion_SAVED_LC_ALL "$ENV{LC_ALL}")
-  set(ENV{LC_ALL} C)
-
-  execute_process(COMMAND ${Subversion_SVN_EXECUTABLE} --version
-    OUTPUT_VARIABLE Subversion_VERSION_SVN
-    OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-  # restore the previous LC_ALL
-  set(ENV{LC_ALL} ${_Subversion_SAVED_LC_ALL})
-
-  string(REGEX REPLACE "^(.*\n)?svn, version ([.0-9]+).*"
-    "\\2" Subversion_VERSION_SVN "${Subversion_VERSION_SVN}")
-
-  macro(Subversion_WC_INFO dir prefix)
-    # the subversion commands should be executed with the C locale, otherwise
-    # the message (which are parsed) may be translated, Alex
-    set(_Subversion_SAVED_LC_ALL "$ENV{LC_ALL}")
-    set(ENV{LC_ALL} C)
-
-    execute_process(COMMAND ${Subversion_SVN_EXECUTABLE} info ${dir}
-      OUTPUT_VARIABLE ${prefix}_WC_INFO
-      ERROR_VARIABLE Subversion_svn_info_error
-      RESULT_VARIABLE Subversion_svn_info_result
-      OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    if(NOT ${Subversion_svn_info_result} EQUAL 0)
-      message(SEND_ERROR "Command \"${Subversion_SVN_EXECUTABLE} info ${dir}\" failed with output:\n${Subversion_svn_info_error}")
-    else()
-
-      string(REGEX REPLACE "^(.*\n)?URL: ([^\n]+).*"
-        "\\2" ${prefix}_WC_URL "${${prefix}_WC_INFO}")
-      string(REGEX REPLACE "^(.*\n)?Repository Root: ([^\n]+).*"
-        "\\2" ${prefix}_WC_ROOT "${${prefix}_WC_INFO}")
-      string(REGEX REPLACE "^(.*\n)?Revision: ([^\n]+).*"
-        "\\2" ${prefix}_WC_REVISION "${${prefix}_WC_INFO}")
-      string(REGEX REPLACE "^(.*\n)?Last Changed Author: ([^\n]+).*"
-        "\\2" ${prefix}_WC_LAST_CHANGED_AUTHOR "${${prefix}_WC_INFO}")
-      string(REGEX REPLACE "^(.*\n)?Last Changed Rev: ([^\n]+).*"
-        "\\2" ${prefix}_WC_LAST_CHANGED_REV "${${prefix}_WC_INFO}")
-      string(REGEX REPLACE "^(.*\n)?Last Changed Date: ([^\n]+).*"
-        "\\2" ${prefix}_WC_LAST_CHANGED_DATE "${${prefix}_WC_INFO}")
-
-    endif()
-
-    # restore the previous LC_ALL
-    set(ENV{LC_ALL} ${_Subversion_SAVED_LC_ALL})
-
-  endmacro()
-
-  macro(Subversion_WC_LOG dir prefix)
-    # This macro can block if the certificate is not signed:
-    # svn ask you to accept the certificate and wait for your answer
-    # This macro requires a svn server network access (Internet most of the time)
-    # and can also be slow since it access the svn server
-    execute_process(COMMAND
-      ${Subversion_SVN_EXECUTABLE} --non-interactive log -r BASE ${dir}
-      OUTPUT_VARIABLE ${prefix}_LAST_CHANGED_LOG
-      ERROR_VARIABLE Subversion_svn_log_error
-      RESULT_VARIABLE Subversion_svn_log_result
-      OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    if(NOT ${Subversion_svn_log_result} EQUAL 0)
-      message(SEND_ERROR "Command \"${Subversion_SVN_EXECUTABLE} log -r BASE ${dir}\" failed with output:\n${Subversion_svn_log_error}")
-    endif()
-  endmacro()
-
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Subversion REQUIRED_VARS Subversion_SVN_EXECUTABLE
-                                             VERSION_VAR Subversion_VERSION_SVN )
-
-# for compatibility
-set(Subversion_FOUND ${SUBVERSION_FOUND})
-set(Subversion_SVN_FOUND ${SUBVERSION_FOUND})
diff --git a/share/cmake-3.2/Modules/FindTIFF.cmake b/share/cmake-3.2/Modules/FindTIFF.cmake
deleted file mode 100644
index a67d24d..0000000
--- a/share/cmake-3.2/Modules/FindTIFF.cmake
+++ /dev/null
@@ -1,59 +0,0 @@
-#.rst:
-# FindTIFF
-# --------
-#
-# Find TIFF library
-#
-# Find the native TIFF includes and library This module defines
-#
-# ::
-#
-#   TIFF_INCLUDE_DIR, where to find tiff.h, etc.
-#   TIFF_LIBRARIES, libraries to link against to use TIFF.
-#   TIFF_FOUND, If false, do not try to use TIFF.
-#
-# also defined, but not for general use are
-#
-# ::
-#
-#   TIFF_LIBRARY, where to find the TIFF library.
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-find_path(TIFF_INCLUDE_DIR tiff.h)
-
-set(TIFF_NAMES ${TIFF_NAMES} tiff libtiff tiff3 libtiff3)
-find_library(TIFF_LIBRARY NAMES ${TIFF_NAMES} )
-
-if(TIFF_INCLUDE_DIR AND EXISTS "${TIFF_INCLUDE_DIR}/tiffvers.h")
-    file(STRINGS "${TIFF_INCLUDE_DIR}/tiffvers.h" tiff_version_str
-         REGEX "^#define[\t ]+TIFFLIB_VERSION_STR[\t ]+\"LIBTIFF, Version .*")
-
-    string(REGEX REPLACE "^#define[\t ]+TIFFLIB_VERSION_STR[\t ]+\"LIBTIFF, Version +([^ \\n]*).*"
-           "\\1" TIFF_VERSION_STRING "${tiff_version_str}")
-    unset(tiff_version_str)
-endif()
-
-# handle the QUIETLY and REQUIRED arguments and set TIFF_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(TIFF
-                                  REQUIRED_VARS TIFF_LIBRARY TIFF_INCLUDE_DIR
-                                  VERSION_VAR TIFF_VERSION_STRING)
-
-if(TIFF_FOUND)
-  set( TIFF_LIBRARIES ${TIFF_LIBRARY} )
-endif()
-
-mark_as_advanced(TIFF_INCLUDE_DIR TIFF_LIBRARY)
diff --git a/share/cmake-3.2/Modules/FindThreads.cmake b/share/cmake-3.2/Modules/FindThreads.cmake
deleted file mode 100644
index a0bc4d1..0000000
--- a/share/cmake-3.2/Modules/FindThreads.cmake
+++ /dev/null
@@ -1,216 +0,0 @@
-#.rst:
-# FindThreads
-# -----------
-#
-# This module determines the thread library of the system.
-#
-# The following variables are set
-#
-# ::
-#
-#   CMAKE_THREAD_LIBS_INIT     - the thread library
-#   CMAKE_USE_SPROC_INIT       - are we using sproc?
-#   CMAKE_USE_WIN32_THREADS_INIT - using WIN32 threads?
-#   CMAKE_USE_PTHREADS_INIT    - are we using pthreads
-#   CMAKE_HP_PTHREADS_INIT     - are we using hp pthreads
-#
-# The following import target is created
-#
-# ::
-#
-#   Threads::Threads
-#
-# For systems with multiple thread libraries, caller can set
-#
-# ::
-#
-#   CMAKE_THREAD_PREFER_PTHREAD
-#
-# If the use of the -pthread compiler and linker flag is prefered then the
-# caller can set
-#
-# ::
-#
-#   THREADS_PREFER_PTHREAD_FLAG
-#
-# Please note that the compiler flag can only be used with the imported
-# target. Use of both the imported target as well as this switch is highly
-# recommended for new code.
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-# Copyright 2011-2014 Rolf Eike Beer <eike@sf-mail.de>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include (CheckIncludeFiles)
-include (CheckLibraryExists)
-include (CheckSymbolExists)
-set(Threads_FOUND FALSE)
-set(CMAKE_REQUIRED_QUIET_SAVE ${CMAKE_REQUIRED_QUIET})
-set(CMAKE_REQUIRED_QUIET ${Threads_FIND_QUIETLY})
-
-# Do we have sproc?
-if(CMAKE_SYSTEM_NAME MATCHES IRIX AND NOT CMAKE_THREAD_PREFER_PTHREAD)
-  CHECK_INCLUDE_FILES("sys/types.h;sys/prctl.h"  CMAKE_HAVE_SPROC_H)
-endif()
-
-# Internal helper macro.
-# Do NOT even think about using it outside of this file!
-macro(_check_threads_lib LIBNAME FUNCNAME VARNAME)
-  if(NOT Threads_FOUND)
-     CHECK_LIBRARY_EXISTS(${LIBNAME} ${FUNCNAME} "" ${VARNAME})
-     if(${VARNAME})
-       set(CMAKE_THREAD_LIBS_INIT "-l${LIBNAME}")
-       set(CMAKE_HAVE_THREADS_LIBRARY 1)
-       set(Threads_FOUND TRUE)
-     endif()
-  endif ()
-endmacro()
-
-# Internal helper macro.
-# Do NOT even think about using it outside of this file!
-macro(_check_pthreads_flag)
-  if(NOT Threads_FOUND)
-    # If we did not found -lpthread, -lpthread, or -lthread, look for -pthread
-    if(NOT DEFINED THREADS_HAVE_PTHREAD_ARG)
-      message(STATUS "Check if compiler accepts -pthread")
-      try_run(THREADS_PTHREAD_ARG THREADS_HAVE_PTHREAD_ARG
-        ${CMAKE_BINARY_DIR}
-        ${CMAKE_CURRENT_LIST_DIR}/CheckForPthreads.c
-        CMAKE_FLAGS -DLINK_LIBRARIES:STRING=-pthread
-        COMPILE_OUTPUT_VARIABLE OUTPUT)
-
-      if(THREADS_HAVE_PTHREAD_ARG)
-        if(THREADS_PTHREAD_ARG STREQUAL "2")
-          set(Threads_FOUND TRUE)
-          message(STATUS "Check if compiler accepts -pthread - yes")
-        else()
-          message(STATUS "Check if compiler accepts -pthread - no")
-          file(APPEND
-            ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-            "Determining if compiler accepts -pthread returned ${THREADS_PTHREAD_ARG} instead of 2. The compiler had the following output:\n${OUTPUT}\n\n")
-        endif()
-      else()
-        message(STATUS "Check if compiler accepts -pthread - no")
-        file(APPEND
-          ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-          "Determining if compiler accepts -pthread failed with the following output:\n${OUTPUT}\n\n")
-      endif()
-
-    endif()
-
-    if(THREADS_HAVE_PTHREAD_ARG)
-      set(Threads_FOUND TRUE)
-      set(CMAKE_THREAD_LIBS_INIT "-pthread")
-    endif()
-  endif()
-endmacro()
-
-if(CMAKE_HAVE_SPROC_H AND NOT CMAKE_THREAD_PREFER_PTHREAD)
-  # We have sproc
-  set(CMAKE_USE_SPROC_INIT 1)
-else()
-  # Do we have pthreads?
-  CHECK_INCLUDE_FILES("pthread.h" CMAKE_HAVE_PTHREAD_H)
-  if(CMAKE_HAVE_PTHREAD_H)
-
-    #
-    # We have pthread.h
-    # Let's check for the library now.
-    #
-    set(CMAKE_HAVE_THREADS_LIBRARY)
-    if(NOT THREADS_HAVE_PTHREAD_ARG)
-      # Check if pthread functions are in normal C library
-      CHECK_SYMBOL_EXISTS(pthread_create pthread.h CMAKE_HAVE_LIBC_CREATE)
-      if(CMAKE_HAVE_LIBC_CREATE)
-        set(CMAKE_THREAD_LIBS_INIT "")
-        set(CMAKE_HAVE_THREADS_LIBRARY 1)
-        set(Threads_FOUND TRUE)
-      else()
-
-        # Check for -pthread first if enabled. This is the recommended
-        # way, but not backwards compatible as one must also pass -pthread
-        # as compiler flag then.
-        if (THREADS_PREFER_PTHREAD_FLAG)
-           _check_pthreads_flag()
-        endif ()
-
-        _check_threads_lib(pthreads pthread_create CMAKE_HAVE_PTHREADS_CREATE)
-        _check_threads_lib(pthread  pthread_create CMAKE_HAVE_PTHREAD_CREATE)
-        if(CMAKE_SYSTEM_NAME MATCHES "SunOS")
-            # On sun also check for -lthread
-            _check_threads_lib(thread thr_create CMAKE_HAVE_THR_CREATE)
-        endif()
-      endif()
-    endif()
-
-    _check_pthreads_flag()
-  endif()
-endif()
-
-if(CMAKE_THREAD_LIBS_INIT OR CMAKE_HAVE_LIBC_CREATE)
-  set(CMAKE_USE_PTHREADS_INIT 1)
-  set(Threads_FOUND TRUE)
-endif()
-
-if(CMAKE_SYSTEM_NAME MATCHES "Windows")
-  set(CMAKE_USE_WIN32_THREADS_INIT 1)
-  set(Threads_FOUND TRUE)
-endif()
-
-if(CMAKE_USE_PTHREADS_INIT)
-  if(CMAKE_SYSTEM_NAME MATCHES "HP-UX")
-    # Use libcma if it exists and can be used.  It provides more
-    # symbols than the plain pthread library.  CMA threads
-    # have actually been deprecated:
-    #   http://docs.hp.com/en/B3920-90091/ch12s03.html#d0e11395
-    #   http://docs.hp.com/en/947/d8.html
-    # but we need to maintain compatibility here.
-    # The CMAKE_HP_PTHREADS setting actually indicates whether CMA threads
-    # are available.
-    CHECK_LIBRARY_EXISTS(cma pthread_attr_create "" CMAKE_HAVE_HP_CMA)
-    if(CMAKE_HAVE_HP_CMA)
-      set(CMAKE_THREAD_LIBS_INIT "-lcma")
-      set(CMAKE_HP_PTHREADS_INIT 1)
-      set(Threads_FOUND TRUE)
-    endif()
-    set(CMAKE_USE_PTHREADS_INIT 1)
-  endif()
-
-  if(CMAKE_SYSTEM MATCHES "OSF1-V")
-    set(CMAKE_USE_PTHREADS_INIT 0)
-    set(CMAKE_THREAD_LIBS_INIT )
-  endif()
-
-  if(CMAKE_SYSTEM MATCHES "CYGWIN_NT")
-    set(CMAKE_USE_PTHREADS_INIT 1)
-    set(Threads_FOUND TRUE)
-    set(CMAKE_THREAD_LIBS_INIT )
-    set(CMAKE_USE_WIN32_THREADS_INIT 0)
-  endif()
-endif()
-
-set(CMAKE_REQUIRED_QUIET ${CMAKE_REQUIRED_QUIET_SAVE})
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(Threads DEFAULT_MSG Threads_FOUND)
-
-if(THREADS_FOUND AND NOT TARGET Threads::Threads)
-  add_library(Threads::Threads INTERFACE IMPORTED)
-
-  if(THREADS_HAVE_PTHREAD_ARG)
-    set_property(TARGET Threads::Threads PROPERTY INTERFACE_COMPILE_OPTIONS "-pthread")
-  endif()
-
-  if(CMAKE_THREAD_LIBS_INIT)
-    set_property(TARGET Threads::Threads PROPERTY INTERFACE_LINK_LIBRARIES "${CMAKE_THREAD_LIBS_INIT}")
-  endif()
-endif()
diff --git a/share/cmake-3.2/Modules/FindXercesC.cmake b/share/cmake-3.2/Modules/FindXercesC.cmake
deleted file mode 100644
index 5a8ea9d..0000000
--- a/share/cmake-3.2/Modules/FindXercesC.cmake
+++ /dev/null
@@ -1,85 +0,0 @@
-#.rst:
-# FindXercesC
-# -----------
-#
-# Find the Apache Xerces-C++ validating XML parser headers and libraries.
-#
-# This module reports information about the Xerces installation in
-# several variables.  General variables::
-#
-#   XercesC_FOUND - true if the Xerces headers and libraries were found
-#   XercesC_VERSION - Xerces release version
-#   XercesC_INCLUDE_DIRS - the directory containing the Xerces headers
-#   XercesC_LIBRARIES - Xerces libraries to be linked
-#
-# The following cache variables may also be set::
-#
-#   XercesC_INCLUDE_DIR - the directory containing the Xerces headers
-#   XercesC_LIBRARY - the Xerces library
-
-# Written by Roger Leigh <rleigh@codelibre.net>
-
-#=============================================================================
-# Copyright 2014 University of Dundee
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-function(_XercesC_GET_VERSION  version_hdr)
-    file(STRINGS ${version_hdr} _contents REGEX "^[ \t]*#define XERCES_VERSION_.*")
-    if(_contents)
-        string(REGEX REPLACE ".*#define XERCES_VERSION_MAJOR[ \t]+([0-9]+).*" "\\1" XercesC_MAJOR "${_contents}")
-        string(REGEX REPLACE ".*#define XERCES_VERSION_MINOR[ \t]+([0-9]+).*" "\\1" XercesC_MINOR "${_contents}")
-        string(REGEX REPLACE ".*#define XERCES_VERSION_REVISION[ \t]+([0-9]+).*" "\\1" XercesC_PATCH "${_contents}")
-
-        if(NOT XercesC_MAJOR MATCHES "^[0-9]+$")
-            message(FATAL_ERROR "Version parsing failed for XERCES_VERSION_MAJOR!")
-        endif()
-        if(NOT XercesC_MINOR MATCHES "^[0-9]+$")
-            message(FATAL_ERROR "Version parsing failed for XERCES_VERSION_MINOR!")
-        endif()
-        if(NOT XercesC_PATCH MATCHES "^[0-9]+$")
-            message(FATAL_ERROR "Version parsing failed for XERCES_VERSION_REVISION!")
-        endif()
-
-        set(XercesC_VERSION "${XercesC_MAJOR}.${XercesC_MINOR}.${XercesC_PATCH}" PARENT_SCOPE)
-    else()
-        message(FATAL_ERROR "Include file ${version_hdr} does not exist or does not contain expected version information")
-    endif()
-endfunction()
-
-# Find include directory
-find_path(XercesC_INCLUDE_DIR
-          NAMES "xercesc/util/PlatformUtils.hpp"
-          DOC "Xerces-C++ include directory")
-mark_as_advanced(XercesC_INCLUDE_DIR)
-
-# Find all XercesC libraries
-find_library(XercesC_LIBRARY "xerces-c"
-  DOC "Xerces-C++ libraries")
-mark_as_advanced(XercesC_LIBRARY)
-
-if(XercesC_INCLUDE_DIR)
-  _XercesC_GET_VERSION("${XercesC_INCLUDE_DIR}/xercesc/util/XercesVersion.hpp")
-endif()
-
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(XercesC
-                                  FOUND_VAR XercesC_FOUND
-                                  REQUIRED_VARS XercesC_LIBRARY
-                                                XercesC_INCLUDE_DIR
-                                                XercesC_VERSION
-                                  VERSION_VAR XercesC_VERSION
-                                  FAIL_MESSAGE "Failed to find XercesC")
-
-if(XercesC_FOUND)
-  set(XercesC_INCLUDE_DIRS "${XercesC_INCLUDE_DIR}")
-  set(XercesC_LIBRARIES "${XercesC_LIBRARY}")
-endif()
diff --git a/share/cmake-3.2/Modules/FindZLIB.cmake b/share/cmake-3.2/Modules/FindZLIB.cmake
deleted file mode 100644
index d4a27d5..0000000
--- a/share/cmake-3.2/Modules/FindZLIB.cmake
+++ /dev/null
@@ -1,123 +0,0 @@
-#.rst:
-# FindZLIB
-# --------
-#
-# Find the native ZLIB includes and library.
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``ZLIB::ZLIB``, if
-# ZLIB has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ::
-#
-#   ZLIB_INCLUDE_DIRS   - where to find zlib.h, etc.
-#   ZLIB_LIBRARIES      - List of libraries when using zlib.
-#   ZLIB_FOUND          - True if zlib found.
-#
-# ::
-#
-#   ZLIB_VERSION_STRING - The version of zlib found (x.y.z)
-#   ZLIB_VERSION_MAJOR  - The major version of zlib
-#   ZLIB_VERSION_MINOR  - The minor version of zlib
-#   ZLIB_VERSION_PATCH  - The patch version of zlib
-#   ZLIB_VERSION_TWEAK  - The tweak version of zlib
-#
-# Backward Compatibility
-# ^^^^^^^^^^^^^^^^^^^^^^
-#
-# The following variable are provided for backward compatibility
-#
-# ::
-#
-#   ZLIB_MAJOR_VERSION  - The major version of zlib
-#   ZLIB_MINOR_VERSION  - The minor version of zlib
-#   ZLIB_PATCH_VERSION  - The patch version of zlib
-#
-# Hints
-# ^^^^^
-#
-# A user may set ``ZLIB_ROOT`` to a zlib installation root to tell this
-# module where to look.
-
-#=============================================================================
-# Copyright 2001-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(_ZLIB_SEARCHES)
-
-# Search ZLIB_ROOT first if it is set.
-if(ZLIB_ROOT)
-  set(_ZLIB_SEARCH_ROOT PATHS ${ZLIB_ROOT} NO_DEFAULT_PATH)
-  list(APPEND _ZLIB_SEARCHES _ZLIB_SEARCH_ROOT)
-endif()
-
-# Normal search.
-set(_ZLIB_SEARCH_NORMAL
-  PATHS "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\Zlib;InstallPath]"
-        "$ENV{PROGRAMFILES}/zlib"
-  )
-list(APPEND _ZLIB_SEARCHES _ZLIB_SEARCH_NORMAL)
-
-set(ZLIB_NAMES z zlib zdll zlib1 zlibd zlibd1)
-
-# Try each search configuration.
-foreach(search ${_ZLIB_SEARCHES})
-  find_path(ZLIB_INCLUDE_DIR NAMES zlib.h        ${${search}} PATH_SUFFIXES include)
-  find_library(ZLIB_LIBRARY  NAMES ${ZLIB_NAMES} ${${search}} PATH_SUFFIXES lib)
-endforeach()
-
-mark_as_advanced(ZLIB_LIBRARY ZLIB_INCLUDE_DIR)
-
-if(ZLIB_INCLUDE_DIR AND EXISTS "${ZLIB_INCLUDE_DIR}/zlib.h")
-    file(STRINGS "${ZLIB_INCLUDE_DIR}/zlib.h" ZLIB_H REGEX "^#define ZLIB_VERSION \"[^\"]*\"$")
-
-    string(REGEX REPLACE "^.*ZLIB_VERSION \"([0-9]+).*$" "\\1" ZLIB_VERSION_MAJOR "${ZLIB_H}")
-    string(REGEX REPLACE "^.*ZLIB_VERSION \"[0-9]+\\.([0-9]+).*$" "\\1" ZLIB_VERSION_MINOR  "${ZLIB_H}")
-    string(REGEX REPLACE "^.*ZLIB_VERSION \"[0-9]+\\.[0-9]+\\.([0-9]+).*$" "\\1" ZLIB_VERSION_PATCH "${ZLIB_H}")
-    set(ZLIB_VERSION_STRING "${ZLIB_VERSION_MAJOR}.${ZLIB_VERSION_MINOR}.${ZLIB_VERSION_PATCH}")
-
-    # only append a TWEAK version if it exists:
-    set(ZLIB_VERSION_TWEAK "")
-    if( "${ZLIB_H}" MATCHES "ZLIB_VERSION \"[0-9]+\\.[0-9]+\\.[0-9]+\\.([0-9]+)")
-        set(ZLIB_VERSION_TWEAK "${CMAKE_MATCH_1}")
-        set(ZLIB_VERSION_STRING "${ZLIB_VERSION_STRING}.${ZLIB_VERSION_TWEAK}")
-    endif()
-
-    set(ZLIB_MAJOR_VERSION "${ZLIB_VERSION_MAJOR}")
-    set(ZLIB_MINOR_VERSION "${ZLIB_VERSION_MINOR}")
-    set(ZLIB_PATCH_VERSION "${ZLIB_VERSION_PATCH}")
-endif()
-
-# handle the QUIETLY and REQUIRED arguments and set ZLIB_FOUND to TRUE if
-# all listed variables are TRUE
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(ZLIB REQUIRED_VARS ZLIB_LIBRARY ZLIB_INCLUDE_DIR
-                                       VERSION_VAR ZLIB_VERSION_STRING)
-
-if(ZLIB_FOUND)
-    set(ZLIB_INCLUDE_DIRS ${ZLIB_INCLUDE_DIR})
-    set(ZLIB_LIBRARIES ${ZLIB_LIBRARY})
-
-    if(NOT TARGET ZLIB::ZLIB)
-      add_library(ZLIB::ZLIB UNKNOWN IMPORTED)
-      set_target_properties(ZLIB::ZLIB PROPERTIES
-        IMPORTED_LOCATION "${ZLIB_LIBRARY}"
-        INTERFACE_INCLUDE_DIRECTORIES "${ZLIB_INCLUDE_DIRS}")
-    endif()
-endif()
diff --git a/share/cmake-3.2/Modules/FindwxWidgets.cmake b/share/cmake-3.2/Modules/FindwxWidgets.cmake
deleted file mode 100644
index dec0ddf..0000000
--- a/share/cmake-3.2/Modules/FindwxWidgets.cmake
+++ /dev/null
@@ -1,1084 +0,0 @@
-#.rst:
-# FindwxWidgets
-# -------------
-#
-# Find a wxWidgets (a.k.a., wxWindows) installation.
-#
-# This module finds if wxWidgets is installed and selects a default
-# configuration to use.  wxWidgets is a modular library.  To specify the
-# modules that you will use, you need to name them as components to the
-# package:
-#
-# find_package(wxWidgets COMPONENTS core base ...)
-#
-# There are two search branches: a windows style and a unix style.  For
-# windows, the following variables are searched for and set to defaults
-# in case of multiple choices.  Change them if the defaults are not
-# desired (i.e., these are the only variables you should change to
-# select a configuration):
-#
-# ::
-#
-#   wxWidgets_ROOT_DIR      - Base wxWidgets directory
-#                             (e.g., C:/wxWidgets-2.6.3).
-#   wxWidgets_LIB_DIR       - Path to wxWidgets libraries
-#                             (e.g., C:/wxWidgets-2.6.3/lib/vc_lib).
-#   wxWidgets_CONFIGURATION - Configuration to use
-#                             (e.g., msw, mswd, mswu, mswunivud, etc.)
-#   wxWidgets_EXCLUDE_COMMON_LIBRARIES
-#                           - Set to TRUE to exclude linking of
-#                             commonly required libs (e.g., png tiff
-#                             jpeg zlib regex expat).
-#
-#
-#
-# For unix style it uses the wx-config utility.  You can select between
-# debug/release, unicode/ansi, universal/non-universal, and
-# static/shared in the QtDialog or ccmake interfaces by turning ON/OFF
-# the following variables:
-#
-# ::
-#
-#   wxWidgets_USE_DEBUG
-#   wxWidgets_USE_UNICODE
-#   wxWidgets_USE_UNIVERSAL
-#   wxWidgets_USE_STATIC
-#
-#
-#
-# There is also a wxWidgets_CONFIG_OPTIONS variable for all other
-# options that need to be passed to the wx-config utility.  For example,
-# to use the base toolkit found in the /usr/local path, set the variable
-# (before calling the FIND_PACKAGE command) as such:
-#
-# ::
-#
-#   set(wxWidgets_CONFIG_OPTIONS --toolkit=base --prefix=/usr)
-#
-#
-#
-# The following are set after the configuration is done for both windows
-# and unix style:
-#
-# ::
-#
-#   wxWidgets_FOUND            - Set to TRUE if wxWidgets was found.
-#   wxWidgets_INCLUDE_DIRS     - Include directories for WIN32
-#                                i.e., where to find "wx/wx.h" and
-#                                "wx/setup.h"; possibly empty for unices.
-#   wxWidgets_LIBRARIES        - Path to the wxWidgets libraries.
-#   wxWidgets_LIBRARY_DIRS     - compile time link dirs, useful for
-#                                rpath on UNIX. Typically an empty string
-#                                in WIN32 environment.
-#   wxWidgets_DEFINITIONS      - Contains defines required to compile/link
-#                                against WX, e.g. WXUSINGDLL
-#   wxWidgets_DEFINITIONS_DEBUG- Contains defines required to compile/link
-#                                against WX debug builds, e.g. __WXDEBUG__
-#   wxWidgets_CXX_FLAGS        - Include dirs and compiler flags for
-#                                unices, empty on WIN32. Essentially
-#                                "`wx-config --cxxflags`".
-#   wxWidgets_USE_FILE         - Convenience include file.
-#
-#
-#
-# Sample usage:
-#
-# ::
-#
-#    # Note that for MinGW users the order of libs is important!
-#    find_package(wxWidgets COMPONENTS net gl core base)
-#    if(wxWidgets_FOUND)
-#      include(${wxWidgets_USE_FILE})
-#      # and for each of your dependent executable/library targets:
-#      target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
-#    endif()
-#
-#
-#
-# If wxWidgets is required (i.e., not an optional part):
-#
-# ::
-#
-#    find_package(wxWidgets REQUIRED net gl core base)
-#    include(${wxWidgets_USE_FILE})
-#    # and for each of your dependent executable/library targets:
-#    target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-# Copyright 2007-2009 Miguel A. Figueroa-Villanueva <miguelf at ieee dot org>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#
-# FIXME: check this and provide a correct sample usage...
-#        Remember to connect back to the upper text.
-# Sample usage with monolithic wx build:
-#
-#   find_package(wxWidgets COMPONENTS mono)
-#   ...
-
-# NOTES
-#
-# This module has been tested on the WIN32 platform with wxWidgets
-# 2.6.2, 2.6.3, and 2.5.3. However, it has been designed to
-# easily extend support to all possible builds, e.g., static/shared,
-# debug/release, unicode, universal, multilib/monolithic, etc..
-#
-# If you want to use the module and your build type is not supported
-# out-of-the-box, please contact me to exchange information on how
-# your system is setup and I'll try to add support for it.
-#
-# AUTHOR
-#
-# Miguel A. Figueroa-Villanueva (miguelf at ieee dot org).
-# Jan Woetzel (jw at mip.informatik.uni-kiel.de).
-#
-# Based on previous works of:
-# Jan Woetzel (FindwxWindows.cmake),
-# Jorgen Bodde and Jerry Fath (FindwxWin.cmake).
-
-# TODO/ideas
-#
-# (1) Option/Setting to use all available wx libs
-# In contrast to expert developer who lists the
-# minimal set of required libs in wxWidgets_USE_LIBS
-# there is the newbie user:
-#   - who just wants to link against WX with more 'magic'
-#   - doesn't know the internal structure of WX or how it was built,
-#     in particular if it is monolithic or not
-#   - want to link against all available WX libs
-# Basically, the intent here is to mimic what wx-config would do by
-# default (i.e., `wx-config --libs`).
-#
-# Possible solution:
-#   Add a reserved keyword "std" that initializes to what wx-config
-# would default to. If the user has not set the wxWidgets_USE_LIBS,
-# default to "std" instead of "base core" as it is now. To implement
-# "std" will basically boil down to a FOR_EACH lib-FOUND, but maybe
-# checking whether a minimal set was found.
-
-
-# FIXME: This and all the DBG_MSG calls should be removed after the
-# module stabilizes.
-#
-# Helper macro to control the debugging output globally. There are
-# two versions for controlling how verbose your output should be.
-macro(DBG_MSG _MSG)
-#  message(STATUS
-#    "${CMAKE_CURRENT_LIST_FILE}(${CMAKE_CURRENT_LIST_LINE}): ${_MSG}")
-endmacro()
-macro(DBG_MSG_V _MSG)
-#  message(STATUS
-#    "${CMAKE_CURRENT_LIST_FILE}(${CMAKE_CURRENT_LIST_LINE}): ${_MSG}")
-endmacro()
-
-# Clear return values in case the module is loaded more than once.
-set(wxWidgets_FOUND FALSE)
-set(wxWidgets_INCLUDE_DIRS "")
-set(wxWidgets_LIBRARIES    "")
-set(wxWidgets_LIBRARY_DIRS "")
-set(wxWidgets_CXX_FLAGS    "")
-
-# Using SYSTEM with INCLUDE_DIRECTORIES in conjunction with wxWidgets on
-# the Mac produces compiler errors. Set wxWidgets_INCLUDE_DIRS_NO_SYSTEM
-# to prevent UsewxWidgets.cmake from using SYSTEM.
-#
-# See cmake mailing list discussions for more info:
-#   http://www.cmake.org/pipermail/cmake/2008-April/021115.html
-#   http://www.cmake.org/pipermail/cmake/2008-April/021146.html
-#
-if(APPLE OR CMAKE_CXX_PLATFORM_ID MATCHES "OpenBSD")
-  set(wxWidgets_INCLUDE_DIRS_NO_SYSTEM 1)
-endif()
-
-# DEPRECATED: This is a patch to support the DEPRECATED use of
-# wxWidgets_USE_LIBS.
-#
-# If wxWidgets_USE_LIBS is set:
-# - if using <components>, then override wxWidgets_USE_LIBS
-# - else set wxWidgets_FIND_COMPONENTS to wxWidgets_USE_LIBS
-if(wxWidgets_USE_LIBS AND NOT wxWidgets_FIND_COMPONENTS)
-  set(wxWidgets_FIND_COMPONENTS ${wxWidgets_USE_LIBS})
-endif()
-DBG_MSG("wxWidgets_FIND_COMPONENTS : ${wxWidgets_FIND_COMPONENTS}")
-
-# Add the convenience use file if available.
-#
-# Get dir of this file which may reside in:
-# - CMAKE_MAKE_ROOT/Modules on CMake installation
-# - CMAKE_MODULE_PATH if user prefers his own specialized version
-set(wxWidgets_USE_FILE "")
-get_filename_component(
-  wxWidgets_CURRENT_LIST_DIR ${CMAKE_CURRENT_LIST_FILE} PATH)
-# Prefer an existing customized version, but the user might override
-# the FindwxWidgets module and not the UsewxWidgets one.
-if(EXISTS "${wxWidgets_CURRENT_LIST_DIR}/UsewxWidgets.cmake")
-  set(wxWidgets_USE_FILE
-    "${wxWidgets_CURRENT_LIST_DIR}/UsewxWidgets.cmake")
-else()
-  set(wxWidgets_USE_FILE UsewxWidgets)
-endif()
-
-#=====================================================================
-# Determine whether unix or win32 paths should be used
-#=====================================================================
-if(WIN32 AND NOT CYGWIN AND NOT MSYS AND NOT CMAKE_CROSSCOMPILING)
-  set(wxWidgets_FIND_STYLE "win32")
-else()
-  set(wxWidgets_FIND_STYLE "unix")
-endif()
-
-#=====================================================================
-# WIN32_FIND_STYLE
-#=====================================================================
-if(wxWidgets_FIND_STYLE STREQUAL "win32")
-  # Useful common wx libs needed by almost all components.
-  set(wxWidgets_COMMON_LIBRARIES png tiff jpeg zlib regex expat)
-
-  # DEPRECATED: Use find_package(wxWidgets COMPONENTS mono) instead.
-  if(NOT wxWidgets_FIND_COMPONENTS)
-    if(wxWidgets_USE_MONOLITHIC)
-      set(wxWidgets_FIND_COMPONENTS mono)
-    else()
-      set(wxWidgets_FIND_COMPONENTS core base) # this is default
-    endif()
-  endif()
-
-  # Add the common (usually required libs) unless
-  # wxWidgets_EXCLUDE_COMMON_LIBRARIES has been set.
-  if(NOT wxWidgets_EXCLUDE_COMMON_LIBRARIES)
-    list(APPEND wxWidgets_FIND_COMPONENTS
-      ${wxWidgets_COMMON_LIBRARIES})
-  endif()
-
-  #-------------------------------------------------------------------
-  # WIN32: Helper MACROS
-  #-------------------------------------------------------------------
-  #
-  # Get filename components for a configuration. For example,
-  #   if _CONFIGURATION = mswunivud, then _UNV=univ, _UCD=u _DBG=d
-  #   if _CONFIGURATION = mswu,      then _UNV="",   _UCD=u _DBG=""
-  #
-  macro(WX_GET_NAME_COMPONENTS _CONFIGURATION _UNV _UCD _DBG)
-    string(REGEX MATCH "univ" ${_UNV} "${_CONFIGURATION}")
-    string(REGEX REPLACE "msw.*(u)[d]*$" "u" ${_UCD} "${_CONFIGURATION}")
-    if(${_UCD} STREQUAL ${_CONFIGURATION})
-      set(${_UCD} "")
-    endif()
-    string(REGEX MATCH "d$" ${_DBG} "${_CONFIGURATION}")
-  endmacro()
-
-  #
-  # Find libraries associated to a configuration.
-  #
-  macro(WX_FIND_LIBS _UNV _UCD _DBG)
-    DBG_MSG_V("m_unv = ${_UNV}")
-    DBG_MSG_V("m_ucd = ${_UCD}")
-    DBG_MSG_V("m_dbg = ${_DBG}")
-
-    # FIXME: What if both regex libs are available. regex should be
-    # found outside the loop and only wx${LIB}${_UCD}${_DBG}.
-    # Find wxWidgets common libraries.
-    foreach(LIB ${wxWidgets_COMMON_LIBRARIES} scintilla)
-      find_library(WX_${LIB}${_DBG}
-        NAMES
-        wx${LIB}${_UCD}${_DBG} # for regex
-        wx${LIB}${_DBG}
-        PATHS ${WX_LIB_DIR}
-        NO_DEFAULT_PATH
-        )
-      mark_as_advanced(WX_${LIB}${_DBG})
-    endforeach()
-
-    # Find wxWidgets multilib base libraries.
-    find_library(WX_base${_DBG}
-      NAMES
-      wxbase30${_UCD}${_DBG}
-      wxbase29${_UCD}${_DBG}
-      wxbase28${_UCD}${_DBG}
-      wxbase27${_UCD}${_DBG}
-      wxbase26${_UCD}${_DBG}
-      wxbase25${_UCD}${_DBG}
-      PATHS ${WX_LIB_DIR}
-      NO_DEFAULT_PATH
-      )
-    mark_as_advanced(WX_base${_DBG})
-    foreach(LIB net odbc xml)
-      find_library(WX_${LIB}${_DBG}
-        NAMES
-        wxbase30${_UCD}${_DBG}_${LIB}
-        wxbase29${_UCD}${_DBG}_${LIB}
-        wxbase28${_UCD}${_DBG}_${LIB}
-        wxbase27${_UCD}${_DBG}_${LIB}
-        wxbase26${_UCD}${_DBG}_${LIB}
-        wxbase25${_UCD}${_DBG}_${LIB}
-        PATHS ${WX_LIB_DIR}
-        NO_DEFAULT_PATH
-        )
-      mark_as_advanced(WX_${LIB}${_DBG})
-    endforeach()
-
-    # Find wxWidgets monolithic library.
-    find_library(WX_mono${_DBG}
-      NAMES
-      wxmsw${_UNV}30${_UCD}${_DBG}
-      wxmsw${_UNV}29${_UCD}${_DBG}
-      wxmsw${_UNV}28${_UCD}${_DBG}
-      wxmsw${_UNV}27${_UCD}${_DBG}
-      wxmsw${_UNV}26${_UCD}${_DBG}
-      wxmsw${_UNV}25${_UCD}${_DBG}
-      PATHS ${WX_LIB_DIR}
-      NO_DEFAULT_PATH
-      )
-    mark_as_advanced(WX_mono${_DBG})
-
-    # Find wxWidgets multilib libraries.
-    foreach(LIB core adv aui html media xrc dbgrid gl qa richtext
-                stc ribbon propgrid webview)
-      find_library(WX_${LIB}${_DBG}
-        NAMES
-        wxmsw${_UNV}30${_UCD}${_DBG}_${LIB}
-        wxmsw${_UNV}29${_UCD}${_DBG}_${LIB}
-        wxmsw${_UNV}28${_UCD}${_DBG}_${LIB}
-        wxmsw${_UNV}27${_UCD}${_DBG}_${LIB}
-        wxmsw${_UNV}26${_UCD}${_DBG}_${LIB}
-        wxmsw${_UNV}25${_UCD}${_DBG}_${LIB}
-        PATHS ${WX_LIB_DIR}
-        NO_DEFAULT_PATH
-        )
-      mark_as_advanced(WX_${LIB}${_DBG})
-    endforeach()
-  endmacro()
-
-  #
-  # Clear all library paths, so that FIND_LIBRARY refinds them.
-  #
-  # Clear a lib, reset its found flag, and mark as advanced.
-  macro(WX_CLEAR_LIB _LIB)
-    set(${_LIB} "${_LIB}-NOTFOUND" CACHE FILEPATH "Cleared." FORCE)
-    set(${_LIB}_FOUND FALSE)
-    mark_as_advanced(${_LIB})
-  endmacro()
-  # Clear all debug or release library paths (arguments are "d" or "").
-  macro(WX_CLEAR_ALL_LIBS _DBG)
-    # Clear wxWidgets common libraries.
-    foreach(LIB ${wxWidgets_COMMON_LIBRARIES} scintilla)
-      WX_CLEAR_LIB(WX_${LIB}${_DBG})
-    endforeach()
-
-    # Clear wxWidgets multilib base libraries.
-    WX_CLEAR_LIB(WX_base${_DBG})
-    foreach(LIB net odbc xml)
-      WX_CLEAR_LIB(WX_${LIB}${_DBG})
-    endforeach()
-
-    # Clear wxWidgets monolithic library.
-    WX_CLEAR_LIB(WX_mono${_DBG})
-
-    # Clear wxWidgets multilib libraries.
-    foreach(LIB core adv aui html media xrc dbgrid gl qa richtext
-                stc ribbon propgrid)
-      WX_CLEAR_LIB(WX_${LIB}${_DBG})
-    endforeach()
-  endmacro()
-  # Clear all wxWidgets debug libraries.
-  macro(WX_CLEAR_ALL_DBG_LIBS)
-    WX_CLEAR_ALL_LIBS("d")
-  endmacro()
-  # Clear all wxWidgets release libraries.
-  macro(WX_CLEAR_ALL_REL_LIBS)
-    WX_CLEAR_ALL_LIBS("")
-  endmacro()
-
-  #
-  # Set the wxWidgets_LIBRARIES variable.
-  # Also, Sets output variable wxWidgets_FOUND to FALSE if it fails.
-  #
-  macro(WX_SET_LIBRARIES _LIBS _DBG)
-    DBG_MSG_V("Looking for ${${_LIBS}}")
-    if(WX_USE_REL_AND_DBG)
-      foreach(LIB ${${_LIBS}})
-        DBG_MSG_V("Searching for ${LIB} and ${LIB}d")
-        DBG_MSG_V("WX_${LIB}  : ${WX_${LIB}}")
-        DBG_MSG_V("WX_${LIB}d : ${WX_${LIB}d}")
-        if(WX_${LIB} AND WX_${LIB}d)
-          DBG_MSG_V("Found ${LIB} and ${LIB}d")
-          list(APPEND wxWidgets_LIBRARIES
-            debug ${WX_${LIB}d} optimized ${WX_${LIB}}
-            )
-        else()
-          DBG_MSG_V("- not found due to missing WX_${LIB}=${WX_${LIB}} or WX_${LIB}d=${WX_${LIB}d}")
-          set(wxWidgets_FOUND FALSE)
-        endif()
-      endforeach()
-    else()
-      foreach(LIB ${${_LIBS}})
-        DBG_MSG_V("Searching for ${LIB}${_DBG}")
-        DBG_MSG_V("WX_${LIB}${_DBG} : ${WX_${LIB}${_DBG}}")
-        if(WX_${LIB}${_DBG})
-          DBG_MSG_V("Found ${LIB}${_DBG}")
-          list(APPEND wxWidgets_LIBRARIES ${WX_${LIB}${_DBG}})
-        else()
-          DBG_MSG_V(
-            "- not found due to missing WX_${LIB}${_DBG}=${WX_${LIB}${_DBG}}")
-          set(wxWidgets_FOUND FALSE)
-        endif()
-      endforeach()
-    endif()
-
-    DBG_MSG_V("OpenGL")
-    list(FIND ${_LIBS} gl WX_USE_GL)
-    if(NOT WX_USE_GL EQUAL -1)
-      DBG_MSG_V("- is required.")
-      list(APPEND wxWidgets_LIBRARIES opengl32 glu32)
-    endif()
-
-    list(APPEND wxWidgets_LIBRARIES winmm comctl32 rpcrt4 wsock32)
-  endmacro()
-
-  #-------------------------------------------------------------------
-  # WIN32: Start actual work.
-  #-------------------------------------------------------------------
-
-  # Look for an installation tree.
-  find_path(wxWidgets_ROOT_DIR
-    NAMES include/wx/wx.h
-    PATHS
-      ENV wxWidgets_ROOT_DIR
-      ENV WXWIN
-      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\wxWidgets_is1;Inno Setup: App Path]"  # WX 2.6.x
-      C:/
-      D:/
-      ENV ProgramFiles
-    PATH_SUFFIXES
-      wxWidgets-3.0.2
-      wxWidgets-3.0.1
-      wxWidgets-3.0.0
-      wxWidgets-2.9.5
-      wxWidgets-2.9.4
-      wxWidgets-2.9.3
-      wxWidgets-2.9.2
-      wxWidgets-2.9.1
-      wxWidgets-2.9.0
-      wxWidgets-2.8.9
-      wxWidgets-2.8.8
-      wxWidgets-2.8.7
-      wxWidgets-2.8.6
-      wxWidgets-2.8.5
-      wxWidgets-2.8.4
-      wxWidgets-2.8.3
-      wxWidgets-2.8.2
-      wxWidgets-2.8.1
-      wxWidgets-2.8.0
-      wxWidgets-2.7.4
-      wxWidgets-2.7.3
-      wxWidgets-2.7.2
-      wxWidgets-2.7.1
-      wxWidgets-2.7.0
-      wxWidgets-2.7.0-1
-      wxWidgets-2.6.4
-      wxWidgets-2.6.3
-      wxWidgets-2.6.2
-      wxWidgets-2.6.1
-      wxWidgets-2.5.4
-      wxWidgets-2.5.3
-      wxWidgets-2.5.2
-      wxWidgets-2.5.1
-      wxWidgets
-    DOC "wxWidgets base/installation directory"
-    )
-
-  # If wxWidgets_ROOT_DIR changed, clear lib dir.
-  if(NOT WX_ROOT_DIR STREQUAL wxWidgets_ROOT_DIR)
-    set(WX_ROOT_DIR ${wxWidgets_ROOT_DIR}
-        CACHE INTERNAL "wxWidgets_ROOT_DIR")
-    set(wxWidgets_LIB_DIR "wxWidgets_LIB_DIR-NOTFOUND"
-        CACHE PATH "Cleared." FORCE)
-  endif()
-
-  if(WX_ROOT_DIR)
-    # Select one default tree inside the already determined wx tree.
-    # Prefer static/shared order usually consistent with build
-    # settings.
-    if(MINGW)
-      set(WX_LIB_DIR_PREFIX gcc)
-    elseif(CMAKE_CL_64)
-      set(WX_LIB_DIR_PREFIX vc_x64)
-    else()
-      set(WX_LIB_DIR_PREFIX vc)
-    endif()
-    if(BUILD_SHARED_LIBS)
-      find_path(wxWidgets_LIB_DIR
-        NAMES
-          msw/wx/setup.h
-          mswd/wx/setup.h
-          mswu/wx/setup.h
-          mswud/wx/setup.h
-          mswuniv/wx/setup.h
-          mswunivd/wx/setup.h
-          mswunivu/wx/setup.h
-          mswunivud/wx/setup.h
-        PATHS
-        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_dll   # prefer shared
-        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_lib
-        DOC "Path to wxWidgets libraries"
-        NO_DEFAULT_PATH
-        )
-    else()
-      find_path(wxWidgets_LIB_DIR
-        NAMES
-          msw/wx/setup.h
-          mswd/wx/setup.h
-          mswu/wx/setup.h
-          mswud/wx/setup.h
-          mswuniv/wx/setup.h
-          mswunivd/wx/setup.h
-          mswunivu/wx/setup.h
-          mswunivud/wx/setup.h
-        PATHS
-        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_lib   # prefer static
-        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_dll
-        DOC "Path to wxWidgets libraries"
-        NO_DEFAULT_PATH
-        )
-    endif()
-
-    # If wxWidgets_LIB_DIR changed, clear all libraries.
-    if(NOT WX_LIB_DIR STREQUAL wxWidgets_LIB_DIR)
-      set(WX_LIB_DIR ${wxWidgets_LIB_DIR} CACHE INTERNAL "wxWidgets_LIB_DIR")
-      WX_CLEAR_ALL_DBG_LIBS()
-      WX_CLEAR_ALL_REL_LIBS()
-    endif()
-
-    if(WX_LIB_DIR)
-      # If building shared libs, define WXUSINGDLL to use dllimport.
-      if(WX_LIB_DIR MATCHES "[dD][lL][lL]")
-        set(wxWidgets_DEFINITIONS WXUSINGDLL)
-        DBG_MSG_V("detected SHARED/DLL tree WX_LIB_DIR=${WX_LIB_DIR}")
-      endif()
-
-      # Search for available configuration types.
-      foreach(CFG mswunivud mswunivd mswud mswd mswunivu mswuniv mswu msw)
-        set(WX_${CFG}_FOUND FALSE)
-        if(EXISTS ${WX_LIB_DIR}/${CFG})
-          list(APPEND WX_CONFIGURATION_LIST ${CFG})
-          set(WX_${CFG}_FOUND TRUE)
-          set(WX_CONFIGURATION ${CFG})
-        endif()
-      endforeach()
-      DBG_MSG_V("WX_CONFIGURATION_LIST=${WX_CONFIGURATION_LIST}")
-
-      if(WX_CONFIGURATION)
-        set(wxWidgets_FOUND TRUE)
-
-        # If the selected configuration wasn't found force the default
-        # one. Otherwise, use it but still force a refresh for
-        # updating the doc string with the current list of available
-        # configurations.
-        if(NOT WX_${wxWidgets_CONFIGURATION}_FOUND)
-          set(wxWidgets_CONFIGURATION ${WX_CONFIGURATION} CACHE STRING
-            "Set wxWidgets configuration (${WX_CONFIGURATION_LIST})" FORCE)
-        else()
-          set(wxWidgets_CONFIGURATION ${wxWidgets_CONFIGURATION} CACHE STRING
-            "Set wxWidgets configuration (${WX_CONFIGURATION_LIST})" FORCE)
-        endif()
-
-        # If release config selected, and both release/debug exist.
-        if(WX_${wxWidgets_CONFIGURATION}d_FOUND)
-          option(wxWidgets_USE_REL_AND_DBG
-            "Use release and debug configurations?" TRUE)
-          set(WX_USE_REL_AND_DBG ${wxWidgets_USE_REL_AND_DBG})
-        else()
-          # If the option exists (already in cache), force it false.
-          if(wxWidgets_USE_REL_AND_DBG)
-            set(wxWidgets_USE_REL_AND_DBG FALSE CACHE BOOL
-              "No ${wxWidgets_CONFIGURATION}d found." FORCE)
-          endif()
-          set(WX_USE_REL_AND_DBG FALSE)
-        endif()
-
-        # Get configuration parameters from the name.
-        WX_GET_NAME_COMPONENTS(${wxWidgets_CONFIGURATION} UNV UCD DBG)
-
-        # Set wxWidgets lib setup include directory.
-        if(EXISTS ${WX_LIB_DIR}/${wxWidgets_CONFIGURATION}/wx/setup.h)
-          set(wxWidgets_INCLUDE_DIRS
-            ${WX_LIB_DIR}/${wxWidgets_CONFIGURATION})
-        else()
-          DBG_MSG("wxWidgets_FOUND FALSE because ${WX_LIB_DIR}/${wxWidgets_CONFIGURATION}/wx/setup.h does not exists.")
-          set(wxWidgets_FOUND FALSE)
-        endif()
-
-        # Set wxWidgets main include directory.
-        if(EXISTS ${WX_ROOT_DIR}/include/wx/wx.h)
-          list(APPEND wxWidgets_INCLUDE_DIRS ${WX_ROOT_DIR}/include)
-        else()
-          DBG_MSG("wxWidgets_FOUND FALSE because WX_ROOT_DIR=${WX_ROOT_DIR} has no ${WX_ROOT_DIR}/include/wx/wx.h")
-          set(wxWidgets_FOUND FALSE)
-        endif()
-
-        # Find wxWidgets libraries.
-        WX_FIND_LIBS("${UNV}" "${UCD}" "${DBG}")
-        if(WX_USE_REL_AND_DBG)
-          WX_FIND_LIBS("${UNV}" "${UCD}" "d")
-        endif()
-
-        # Settings for requested libs (i.e., include dir, libraries, etc.).
-        WX_SET_LIBRARIES(wxWidgets_FIND_COMPONENTS "${DBG}")
-
-        # Add necessary definitions for unicode builds
-        if("${UCD}" STREQUAL "u")
-          list(APPEND wxWidgets_DEFINITIONS UNICODE _UNICODE)
-        endif()
-
-        # Add necessary definitions for debug builds
-        set(wxWidgets_DEFINITIONS_DEBUG _DEBUG __WXDEBUG__)
-
-      endif()
-    endif()
-  endif()
-
-#=====================================================================
-# UNIX_FIND_STYLE
-#=====================================================================
-else()
-  if(wxWidgets_FIND_STYLE STREQUAL "unix")
-    #-----------------------------------------------------------------
-    # UNIX: Helper MACROS
-    #-----------------------------------------------------------------
-    #
-    # Set the default values based on "wx-config --selected-config".
-    #
-    macro(WX_CONFIG_SELECT_GET_DEFAULT)
-      execute_process(
-        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
-          ${wxWidgets_CONFIG_OPTIONS} --selected-config
-        OUTPUT_VARIABLE _wx_selected_config
-        RESULT_VARIABLE _wx_result
-        ERROR_QUIET
-        )
-      if(_wx_result EQUAL 0)
-        foreach(_opt_name debug static unicode universal)
-          string(TOUPPER ${_opt_name} _upper_opt_name)
-          if(_wx_selected_config MATCHES "${_opt_name}")
-            set(wxWidgets_DEFAULT_${_upper_opt_name} ON)
-          else()
-            set(wxWidgets_DEFAULT_${_upper_opt_name} OFF)
-          endif()
-        endforeach()
-      else()
-        foreach(_upper_opt_name DEBUG STATIC UNICODE UNIVERSAL)
-          set(wxWidgets_DEFAULT_${_upper_opt_name} OFF)
-        endforeach()
-      endif()
-    endmacro()
-
-    #
-    # Query a boolean configuration option to determine if the system
-    # has both builds available. If so, provide the selection option
-    # to the user.
-    #
-    macro(WX_CONFIG_SELECT_QUERY_BOOL _OPT_NAME _OPT_HELP)
-      execute_process(
-        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
-          ${wxWidgets_CONFIG_OPTIONS} --${_OPT_NAME}=yes
-        RESULT_VARIABLE _wx_result_yes
-        OUTPUT_QUIET
-        ERROR_QUIET
-        )
-      execute_process(
-        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
-          ${wxWidgets_CONFIG_OPTIONS} --${_OPT_NAME}=no
-        RESULT_VARIABLE _wx_result_no
-        OUTPUT_QUIET
-        ERROR_QUIET
-        )
-      string(TOUPPER ${_OPT_NAME} _UPPER_OPT_NAME)
-      if(_wx_result_yes EQUAL 0 AND _wx_result_no EQUAL 0)
-        option(wxWidgets_USE_${_UPPER_OPT_NAME}
-          ${_OPT_HELP} ${wxWidgets_DEFAULT_${_UPPER_OPT_NAME}})
-      else()
-        # If option exists (already in cache), force to available one.
-        if(DEFINED wxWidgets_USE_${_UPPER_OPT_NAME})
-          if(_wx_result_yes EQUAL 0)
-            set(wxWidgets_USE_${_UPPER_OPT_NAME} ON  CACHE BOOL ${_OPT_HELP} FORCE)
-          else()
-            set(wxWidgets_USE_${_UPPER_OPT_NAME} OFF CACHE BOOL ${_OPT_HELP} FORCE)
-          endif()
-        endif()
-      endif()
-    endmacro()
-
-    #
-    # Set wxWidgets_SELECT_OPTIONS to wx-config options for selecting
-    # among multiple builds.
-    #
-    macro(WX_CONFIG_SELECT_SET_OPTIONS)
-      set(wxWidgets_SELECT_OPTIONS ${wxWidgets_CONFIG_OPTIONS})
-      foreach(_opt_name debug static unicode universal)
-        string(TOUPPER ${_opt_name} _upper_opt_name)
-        if(DEFINED wxWidgets_USE_${_upper_opt_name})
-          if(wxWidgets_USE_${_upper_opt_name})
-            list(APPEND wxWidgets_SELECT_OPTIONS --${_opt_name}=yes)
-          else()
-            list(APPEND wxWidgets_SELECT_OPTIONS --${_opt_name}=no)
-          endif()
-        endif()
-      endforeach()
-    endmacro()
-
-    #-----------------------------------------------------------------
-    # UNIX: Start actual work.
-    #-----------------------------------------------------------------
-    # Support cross-compiling, only search in the target platform.
-    find_program(wxWidgets_CONFIG_EXECUTABLE wx-config
-      DOC "Location of wxWidgets library configuration provider binary (wx-config)."
-      ONLY_CMAKE_FIND_ROOT_PATH
-      )
-
-    if(wxWidgets_CONFIG_EXECUTABLE)
-      set(wxWidgets_FOUND TRUE)
-
-      # get defaults based on "wx-config --selected-config"
-      WX_CONFIG_SELECT_GET_DEFAULT()
-
-      # for each option: if both builds are available, provide option
-      WX_CONFIG_SELECT_QUERY_BOOL(debug "Use debug build?")
-      WX_CONFIG_SELECT_QUERY_BOOL(unicode "Use unicode build?")
-      WX_CONFIG_SELECT_QUERY_BOOL(universal "Use universal build?")
-      WX_CONFIG_SELECT_QUERY_BOOL(static "Link libraries statically?")
-
-      # process selection to set wxWidgets_SELECT_OPTIONS
-      WX_CONFIG_SELECT_SET_OPTIONS()
-      DBG_MSG("wxWidgets_SELECT_OPTIONS=${wxWidgets_SELECT_OPTIONS}")
-
-      # run the wx-config program to get cxxflags
-      execute_process(
-        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
-          ${wxWidgets_SELECT_OPTIONS} --cxxflags
-        OUTPUT_VARIABLE wxWidgets_CXX_FLAGS
-        RESULT_VARIABLE RET
-        ERROR_QUIET
-        )
-      if(RET EQUAL 0)
-        string(STRIP "${wxWidgets_CXX_FLAGS}" wxWidgets_CXX_FLAGS)
-        separate_arguments(wxWidgets_CXX_FLAGS)
-
-        DBG_MSG_V("wxWidgets_CXX_FLAGS=${wxWidgets_CXX_FLAGS}")
-
-        # parse definitions from cxxflags;
-        #   drop -D* from CXXFLAGS and the -D prefix
-        string(REGEX MATCHALL "-D[^;]+"
-          wxWidgets_DEFINITIONS  "${wxWidgets_CXX_FLAGS}")
-        string(REGEX REPLACE "-D[^;]+(;|$)" ""
-          wxWidgets_CXX_FLAGS "${wxWidgets_CXX_FLAGS}")
-        string(REGEX REPLACE ";$" ""
-          wxWidgets_CXX_FLAGS "${wxWidgets_CXX_FLAGS}")
-        string(REPLACE "-D" ""
-          wxWidgets_DEFINITIONS "${wxWidgets_DEFINITIONS}")
-
-        # parse include dirs from cxxflags; drop -I prefix
-        string(REGEX MATCHALL "-I[^;]+"
-          wxWidgets_INCLUDE_DIRS "${wxWidgets_CXX_FLAGS}")
-        string(REGEX REPLACE "-I[^;]+;" ""
-          wxWidgets_CXX_FLAGS "${wxWidgets_CXX_FLAGS}")
-        string(REPLACE "-I" ""
-          wxWidgets_INCLUDE_DIRS "${wxWidgets_INCLUDE_DIRS}")
-
-        DBG_MSG_V("wxWidgets_DEFINITIONS=${wxWidgets_DEFINITIONS}")
-        DBG_MSG_V("wxWidgets_INCLUDE_DIRS=${wxWidgets_INCLUDE_DIRS}")
-        DBG_MSG_V("wxWidgets_CXX_FLAGS=${wxWidgets_CXX_FLAGS}")
-
-      else()
-        set(wxWidgets_FOUND FALSE)
-        DBG_MSG_V(
-          "${wxWidgets_CONFIG_EXECUTABLE} --cxxflags FAILED with RET=${RET}")
-      endif()
-
-      # run the wx-config program to get the libs
-      # - NOTE: wx-config doesn't verify that the libs requested exist
-      #         it just produces the names. Maybe a TRY_COMPILE would
-      #         be useful here...
-      string(REPLACE ";" ","
-        wxWidgets_FIND_COMPONENTS "${wxWidgets_FIND_COMPONENTS}")
-      execute_process(
-        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
-          ${wxWidgets_SELECT_OPTIONS} --libs ${wxWidgets_FIND_COMPONENTS}
-        OUTPUT_VARIABLE wxWidgets_LIBRARIES
-        RESULT_VARIABLE RET
-        ERROR_QUIET
-        )
-      if(RET EQUAL 0)
-        string(STRIP "${wxWidgets_LIBRARIES}" wxWidgets_LIBRARIES)
-        separate_arguments(wxWidgets_LIBRARIES)
-        string(REPLACE "-framework;" "-framework "
-          wxWidgets_LIBRARIES "${wxWidgets_LIBRARIES}")
-        string(REPLACE "-arch;" "-arch "
-          wxWidgets_LIBRARIES "${wxWidgets_LIBRARIES}")
-        string(REPLACE "-isysroot;" "-isysroot "
-          wxWidgets_LIBRARIES "${wxWidgets_LIBRARIES}")
-
-        # extract linkdirs (-L) for rpath (i.e., LINK_DIRECTORIES)
-        string(REGEX MATCHALL "-L[^;]+"
-          wxWidgets_LIBRARY_DIRS "${wxWidgets_LIBRARIES}")
-        string(REPLACE "-L" ""
-          wxWidgets_LIBRARY_DIRS "${wxWidgets_LIBRARY_DIRS}")
-
-        DBG_MSG_V("wxWidgets_LIBRARIES=${wxWidgets_LIBRARIES}")
-        DBG_MSG_V("wxWidgets_LIBRARY_DIRS=${wxWidgets_LIBRARY_DIRS}")
-
-      else()
-        set(wxWidgets_FOUND FALSE)
-        DBG_MSG("${wxWidgets_CONFIG_EXECUTABLE} --libs ${wxWidgets_FIND_COMPONENTS} FAILED with RET=${RET}")
-      endif()
-    endif()
-
-#=====================================================================
-# Neither UNIX_FIND_STYLE, nor WIN32_FIND_STYLE
-#=====================================================================
-  else()
-    if(NOT wxWidgets_FIND_QUIETLY)
-      message(STATUS
-        "${CMAKE_CURRENT_LIST_FILE}(${CMAKE_CURRENT_LIST_LINE}): \n"
-        "  Platform unknown/unsupported. It's neither WIN32 nor UNIX "
-        "find style."
-        )
-    endif()
-  endif()
-endif()
-
-# Debug output:
-DBG_MSG("wxWidgets_FOUND           : ${wxWidgets_FOUND}")
-DBG_MSG("wxWidgets_INCLUDE_DIRS    : ${wxWidgets_INCLUDE_DIRS}")
-DBG_MSG("wxWidgets_LIBRARY_DIRS    : ${wxWidgets_LIBRARY_DIRS}")
-DBG_MSG("wxWidgets_LIBRARIES       : ${wxWidgets_LIBRARIES}")
-DBG_MSG("wxWidgets_CXX_FLAGS       : ${wxWidgets_CXX_FLAGS}")
-DBG_MSG("wxWidgets_USE_FILE        : ${wxWidgets_USE_FILE}")
-
-#=====================================================================
-#=====================================================================
-include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
-FIND_PACKAGE_HANDLE_STANDARD_ARGS(wxWidgets DEFAULT_MSG wxWidgets_FOUND)
-# Maintain consistency with all other variables.
-set(wxWidgets_FOUND ${WXWIDGETS_FOUND})
-
-#=====================================================================
-# Macros for use in wxWidgets apps.
-# - This module will not fail to find wxWidgets based on the code
-#   below. Hence, it's required to check for validity of:
-#
-# wxWidgets_wxrc_EXECUTABLE
-#=====================================================================
-
-# Resource file compiler.
-find_program(wxWidgets_wxrc_EXECUTABLE wxrc
-  ${wxWidgets_ROOT_DIR}/utils/wxrc/vc_msw
-  DOC "Location of wxWidgets resource file compiler binary (wxrc)"
-  )
-
-#
-# WX_SPLIT_ARGUMENTS_ON(<keyword> <left> <right> <arg1> <arg2> ...)
-#
-# Sets <left> and <right> to contain arguments to the left and right,
-# respectively, of <keyword>.
-#
-# Example usage:
-#  function(WXWIDGETS_ADD_RESOURCES outfiles)
-#    WX_SPLIT_ARGUMENTS_ON(OPTIONS wxrc_files wxrc_options ${ARGN})
-#    ...
-#  endfunction()
-#
-#  WXWIDGETS_ADD_RESOURCES(sources ${xrc_files} OPTIONS -e -o file.C)
-#
-# NOTE: This is a generic piece of code that should be renamed to
-# SPLIT_ARGUMENTS_ON and put in a file serving the same purpose as
-# FindPackageStandardArgs.cmake. At the time of this writing
-# FindQt4.cmake has a QT4_EXTRACT_OPTIONS, which I basically copied
-# here a bit more generalized. So, there are already two find modules
-# using this approach.
-#
-function(WX_SPLIT_ARGUMENTS_ON _keyword _leftvar _rightvar)
-  # FIXME: Document that the input variables will be cleared.
-  #list(APPEND ${_leftvar}  "")
-  #list(APPEND ${_rightvar} "")
-  set(${_leftvar}  "")
-  set(${_rightvar} "")
-
-  set(_doing_right FALSE)
-  foreach(element ${ARGN})
-    if("${element}" STREQUAL "${_keyword}")
-      set(_doing_right TRUE)
-    else()
-      if(_doing_right)
-        list(APPEND ${_rightvar} "${element}")
-      else()
-        list(APPEND ${_leftvar} "${element}")
-      endif()
-    endif()
-  endforeach()
-
-  set(${_leftvar}  ${${_leftvar}}  PARENT_SCOPE)
-  set(${_rightvar} ${${_rightvar}} PARENT_SCOPE)
-endfunction()
-
-#
-# WX_GET_DEPENDENCIES_FROM_XML(
-#   <depends>
-#   <match_pattern>
-#   <clean_pattern>
-#   <xml_contents>
-#   <depends_path>
-#   )
-#
-# FIXME: Add documentation here...
-#
-function(WX_GET_DEPENDENCIES_FROM_XML
-    _depends
-    _match_patt
-    _clean_patt
-    _xml_contents
-    _depends_path
-    )
-
-  string(REGEX MATCHALL
-    ${_match_patt}
-    dep_file_list
-    "${${_xml_contents}}"
-    )
-  foreach(dep_file ${dep_file_list})
-    string(REGEX REPLACE ${_clean_patt} "" dep_file "${dep_file}")
-
-    # make the file have an absolute path
-    if(NOT IS_ABSOLUTE "${dep_file}")
-      set(dep_file "${${_depends_path}}/${dep_file}")
-    endif()
-
-    # append file to dependency list
-    list(APPEND ${_depends} "${dep_file}")
-  endforeach()
-
-  set(${_depends} ${${_depends}} PARENT_SCOPE)
-endfunction()
-
-#
-# WXWIDGETS_ADD_RESOURCES(<sources> <xrc_files>
-#                         OPTIONS <options> [NO_CPP_CODE])
-#
-# Adds a custom command for resource file compilation of the
-# <xrc_files> and appends the output files to <sources>.
-#
-# Example usages:
-#   WXWIDGETS_ADD_RESOURCES(sources xrc/main_frame.xrc)
-#   WXWIDGETS_ADD_RESOURCES(sources ${xrc_files} OPTIONS -e -o altname.cxx)
-#
-function(WXWIDGETS_ADD_RESOURCES _outfiles)
-  WX_SPLIT_ARGUMENTS_ON(OPTIONS rc_file_list rc_options ${ARGN})
-
-  # Parse files for dependencies.
-  set(rc_file_list_abs "")
-  set(rc_depends       "")
-  foreach(rc_file ${rc_file_list})
-    get_filename_component(depends_path ${rc_file} PATH)
-
-    get_filename_component(rc_file_abs ${rc_file} ABSOLUTE)
-    list(APPEND rc_file_list_abs "${rc_file_abs}")
-
-    # All files have absolute paths or paths relative to the location
-    # of the rc file.
-    file(READ "${rc_file_abs}" rc_file_contents)
-
-    # get bitmap/bitmap2 files
-    WX_GET_DEPENDENCIES_FROM_XML(
-      rc_depends
-      "<bitmap[^<]+"
-      "^<bitmap[^>]*>"
-      rc_file_contents
-      depends_path
-      )
-
-    # get url files
-    WX_GET_DEPENDENCIES_FROM_XML(
-      rc_depends
-      "<url[^<]+"
-      "^<url[^>]*>"
-      rc_file_contents
-      depends_path
-      )
-
-    # get wxIcon files
-    WX_GET_DEPENDENCIES_FROM_XML(
-      rc_depends
-      "<object[^>]*class=\"wxIcon\"[^<]+"
-      "^<object[^>]*>"
-      rc_file_contents
-      depends_path
-      )
-  endforeach()
-
-  #
-  # Parse options.
-  #
-  # If NO_CPP_CODE option specified, then produce .xrs file rather
-  # than a .cpp file (i.e., don't add the default --cpp-code option).
-  list(FIND rc_options NO_CPP_CODE index)
-  if(index EQUAL -1)
-    list(APPEND rc_options --cpp-code)
-    # wxrc's default output filename for cpp code.
-    set(outfile resource.cpp)
-  else()
-    list(REMOVE_AT rc_options ${index})
-    # wxrc's default output filename for xrs file.
-    set(outfile resource.xrs)
-  endif()
-
-  # Get output name for use in ADD_CUSTOM_COMMAND.
-  # - short option scanning
-  list(FIND rc_options -o index)
-  if(NOT index EQUAL -1)
-    math(EXPR filename_index "${index} + 1")
-    list(GET rc_options ${filename_index} outfile)
-    #list(REMOVE_AT rc_options ${index} ${filename_index})
-  endif()
-  # - long option scanning
-  string(REGEX MATCH "--output=[^;]*" outfile_opt "${rc_options}")
-  if(outfile_opt)
-    string(REPLACE "--output=" "" outfile "${outfile_opt}")
-  endif()
-  #string(REGEX REPLACE "--output=[^;]*;?" "" rc_options "${rc_options}")
-  #string(REGEX REPLACE ";$" "" rc_options "${rc_options}")
-
-  if(NOT IS_ABSOLUTE "${outfile}")
-    set(outfile "${CMAKE_CURRENT_BINARY_DIR}/${outfile}")
-  endif()
-  add_custom_command(
-    OUTPUT "${outfile}"
-    COMMAND ${wxWidgets_wxrc_EXECUTABLE} ${rc_options} ${rc_file_list_abs}
-    DEPENDS ${rc_file_list_abs} ${rc_depends}
-    )
-
-  # Add generated header to output file list.
-  list(FIND rc_options -e short_index)
-  list(FIND rc_options --extra-cpp-code long_index)
-  if(NOT short_index EQUAL -1 OR NOT long_index EQUAL -1)
-    get_filename_component(outfile_ext ${outfile} EXT)
-    string(REPLACE "${outfile_ext}" ".h" outfile_header "${outfile}")
-    list(APPEND ${_outfiles} "${outfile_header}")
-    set_source_files_properties(
-      "${outfile_header}" PROPERTIES GENERATED TRUE
-      )
-  endif()
-
-  # Add generated file to output file list.
-  list(APPEND ${_outfiles} "${outfile}")
-
-  set(${_outfiles} ${${_outfiles}} PARENT_SCOPE)
-endfunction()
diff --git a/share/cmake-3.2/Modules/FortranCInterface.cmake b/share/cmake-3.2/Modules/FortranCInterface.cmake
deleted file mode 100644
index 27f8a82..0000000
--- a/share/cmake-3.2/Modules/FortranCInterface.cmake
+++ /dev/null
@@ -1,341 +0,0 @@
-#.rst:
-# FortranCInterface
-# -----------------
-#
-# Fortran/C Interface Detection
-#
-# This module automatically detects the API by which C and Fortran
-# languages interact.  Variables indicate if the mangling is found:
-#
-# ::
-#
-#    FortranCInterface_GLOBAL_FOUND = Global subroutines and functions
-#    FortranCInterface_MODULE_FOUND = Module subroutines and functions
-#                                     (declared by "MODULE PROCEDURE")
-#
-# A function is provided to generate a C header file containing macros
-# to mangle symbol names:
-#
-# ::
-#
-#    FortranCInterface_HEADER(<file>
-#                             [MACRO_NAMESPACE <macro-ns>]
-#                             [SYMBOL_NAMESPACE <ns>]
-#                             [SYMBOLS [<module>:]<function> ...])
-#
-# It generates in <file> definitions of the following macros:
-#
-# ::
-#
-#    #define FortranCInterface_GLOBAL (name,NAME) ...
-#    #define FortranCInterface_GLOBAL_(name,NAME) ...
-#    #define FortranCInterface_MODULE (mod,name, MOD,NAME) ...
-#    #define FortranCInterface_MODULE_(mod,name, MOD,NAME) ...
-#
-# These macros mangle four categories of Fortran symbols, respectively:
-#
-# ::
-#
-#    - Global symbols without '_': call mysub()
-#    - Global symbols with '_'   : call my_sub()
-#    - Module symbols without '_': use mymod; call mysub()
-#    - Module symbols with '_'   : use mymod; call my_sub()
-#
-# If mangling for a category is not known, its macro is left undefined.
-# All macros require raw names in both lower case and upper case.  The
-# MACRO_NAMESPACE option replaces the default "FortranCInterface_"
-# prefix with a given namespace "<macro-ns>".
-#
-# The SYMBOLS option lists symbols to mangle automatically with C
-# preprocessor definitions:
-#
-# ::
-#
-#    <function>          ==> #define <ns><function> ...
-#    <module>:<function> ==> #define <ns><module>_<function> ...
-#
-# If the mangling for some symbol is not known then no preprocessor
-# definition is created, and a warning is displayed.  The
-# SYMBOL_NAMESPACE option prefixes all preprocessor definitions
-# generated by the SYMBOLS option with a given namespace "<ns>".
-#
-# Example usage:
-#
-# ::
-#
-#    include(FortranCInterface)
-#    FortranCInterface_HEADER(FC.h MACRO_NAMESPACE "FC_")
-#
-# This creates a "FC.h" header that defines mangling macros FC_GLOBAL(),
-# FC_GLOBAL_(), FC_MODULE(), and FC_MODULE_().
-#
-# Example usage:
-#
-# ::
-#
-#    include(FortranCInterface)
-#    FortranCInterface_HEADER(FCMangle.h
-#                             MACRO_NAMESPACE "FC_"
-#                             SYMBOL_NAMESPACE "FC_"
-#                             SYMBOLS mysub mymod:my_sub)
-#
-# This creates a "FCMangle.h" header that defines the same FC_*()
-# mangling macros as the previous example plus preprocessor symbols
-# FC_mysub and FC_mymod_my_sub.
-#
-# Another function is provided to verify that the Fortran and C/C++
-# compilers work together:
-#
-# ::
-#
-#    FortranCInterface_VERIFY([CXX] [QUIET])
-#
-# It tests whether a simple test executable using Fortran and C (and C++
-# when the CXX option is given) compiles and links successfully.  The
-# result is stored in the cache entry FortranCInterface_VERIFIED_C (or
-# FortranCInterface_VERIFIED_CXX if CXX is given) as a boolean.  If the
-# check fails and QUIET is not given the function terminates with a
-# FATAL_ERROR message describing the problem.  The purpose of this check
-# is to stop a build early for incompatible compiler combinations.  The
-# test is built in the Release configuration.
-#
-# FortranCInterface is aware of possible GLOBAL and MODULE manglings for
-# many Fortran compilers, but it also provides an interface to specify
-# new possible manglings.  Set the variables
-#
-# ::
-#
-#    FortranCInterface_GLOBAL_SYMBOLS
-#    FortranCInterface_MODULE_SYMBOLS
-#
-# before including FortranCInterface to specify manglings of the symbols
-# "MySub", "My_Sub", "MyModule:MySub", and "My_Module:My_Sub".  For
-# example, the code:
-#
-# ::
-#
-#    set(FortranCInterface_GLOBAL_SYMBOLS mysub_ my_sub__ MYSUB_)
-#      #                                  ^^^^^  ^^^^^^   ^^^^^
-#    set(FortranCInterface_MODULE_SYMBOLS
-#        __mymodule_MOD_mysub __my_module_MOD_my_sub)
-#      #   ^^^^^^^^     ^^^^^   ^^^^^^^^^     ^^^^^^
-#    include(FortranCInterface)
-#
-# tells FortranCInterface to try given GLOBAL and MODULE manglings.
-# (The carets point at raw symbol names for clarity in this example but
-# are not needed.)
-
-#=============================================================================
-# Copyright 2008-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-#-----------------------------------------------------------------------------
-# Execute at most once in a project.
-if(FortranCInterface_SOURCE_DIR)
-  return()
-endif()
-
-# Use CMake 2.8.0 behavior for this module regardless of including context.
-cmake_policy(PUSH)
-cmake_policy(VERSION 2.8.0)
-
-#-----------------------------------------------------------------------------
-# Verify that C and Fortran are available.
-foreach(lang C Fortran)
-  if(NOT CMAKE_${lang}_COMPILER_LOADED)
-    message(FATAL_ERROR
-      "FortranCInterface requires the ${lang} language to be enabled.")
-  endif()
-endforeach()
-
-#-----------------------------------------------------------------------------
-set(FortranCInterface_SOURCE_DIR ${CMAKE_ROOT}/Modules/FortranCInterface)
-
-# MinGW's make tool does not always like () in the path
-if("${CMAKE_GENERATOR}" MATCHES "MinGW" AND
-    "${FortranCInterface_SOURCE_DIR}" MATCHES "[()]")
-  file(COPY ${FortranCInterface_SOURCE_DIR}/
-    DESTINATION ${CMAKE_BINARY_DIR}/CMakeFiles/FortranCInterfaceMinGW)
-  set(FortranCInterface_SOURCE_DIR ${CMAKE_BINARY_DIR}/CMakeFiles/FortranCInterfaceMinGW)
-endif()
-
-# Create the interface detection project if it does not exist.
-if(NOT FortranCInterface_BINARY_DIR)
-  set(FortranCInterface_BINARY_DIR ${CMAKE_BINARY_DIR}/CMakeFiles/FortranCInterface)
-  include(${FortranCInterface_SOURCE_DIR}/Detect.cmake)
-endif()
-
-# Load the detection results.
-include(${FortranCInterface_BINARY_DIR}/Output.cmake)
-
-#-----------------------------------------------------------------------------
-function(FortranCInterface_HEADER file)
-  # Parse arguments.
-  if(IS_ABSOLUTE "${file}")
-    set(FILE "${file}")
-  else()
-    set(FILE "${CMAKE_CURRENT_BINARY_DIR}/${file}")
-  endif()
-  set(MACRO_NAMESPACE "FortranCInterface_")
-  set(SYMBOL_NAMESPACE)
-  set(SYMBOLS)
-  set(doing)
-  foreach(arg ${ARGN})
-    if("x${arg}" MATCHES "^x(SYMBOLS|SYMBOL_NAMESPACE|MACRO_NAMESPACE)$")
-      set(doing "${arg}")
-    elseif("x${doing}" MATCHES "^x(SYMBOLS)$")
-      list(APPEND "${doing}" "${arg}")
-    elseif("x${doing}" MATCHES "^x(SYMBOL_NAMESPACE|MACRO_NAMESPACE)$")
-      set("${doing}" "${arg}")
-      set(doing)
-    else()
-      message(AUTHOR_WARNING "Unknown argument: \"${arg}\"")
-    endif()
-  endforeach()
-
-  # Generate macro definitions.
-  set(HEADER_CONTENT)
-  set(_desc_GLOBAL  "/* Mangling for Fortran global symbols without underscores. */")
-  set(_desc_GLOBAL_ "/* Mangling for Fortran global symbols with underscores. */")
-  set(_desc_MODULE  "/* Mangling for Fortran module symbols without underscores. */")
-  set(_desc_MODULE_ "/* Mangling for Fortran module symbols with underscores. */")
-  foreach(macro GLOBAL GLOBAL_ MODULE MODULE_)
-    if(FortranCInterface_${macro}_MACRO)
-      set(HEADER_CONTENT "${HEADER_CONTENT}
-${_desc_${macro}}
-#define ${MACRO_NAMESPACE}${macro}${FortranCInterface_${macro}_MACRO}
-")
-    endif()
-  endforeach()
-
-  # Generate symbol mangling definitions.
-  if(SYMBOLS)
-    set(HEADER_CONTENT "${HEADER_CONTENT}
-/*--------------------------------------------------------------------------*/
-/* Mangle some symbols automatically.                                       */
-")
-  endif()
-  foreach(f ${SYMBOLS})
-    if("${f}" MATCHES ":")
-      # Module symbol name.  Parse "<module>:<function>" syntax.
-      string(REPLACE ":" ";" pieces "${f}")
-      list(GET pieces 0 module)
-      list(GET pieces 1 function)
-      string(TOUPPER "${module}" m_upper)
-      string(TOLOWER "${module}" m_lower)
-      string(TOUPPER "${function}" f_upper)
-      string(TOLOWER "${function}" f_lower)
-      if("${function}" MATCHES "_")
-        set(form "_")
-      else()
-        set(form "")
-      endif()
-      if(FortranCInterface_MODULE${form}_MACRO)
-        set(HEADER_CONTENT "${HEADER_CONTENT}#define ${SYMBOL_NAMESPACE}${module}_${function} ${MACRO_NAMESPACE}MODULE${form}(${m_lower},${f_lower}, ${m_upper},${f_upper})\n")
-      else()
-        message(AUTHOR_WARNING "No FortranCInterface mangling known for ${f}")
-      endif()
-    else()
-      # Global symbol name.
-      if("${f}" MATCHES "_")
-        set(form "_")
-      else()
-        set(form "")
-      endif()
-      string(TOUPPER "${f}" f_upper)
-      string(TOLOWER "${f}" f_lower)
-      if(FortranCInterface_GLOBAL${form}_MACRO)
-        set(HEADER_CONTENT "${HEADER_CONTENT}#define ${SYMBOL_NAMESPACE}${f} ${MACRO_NAMESPACE}GLOBAL${form}(${f_lower}, ${f_upper})\n")
-      else()
-        message(AUTHOR_WARNING "No FortranCInterface mangling known for ${f}")
-      endif()
-    endif()
-  endforeach()
-
-  # Store the content.
-  configure_file(${FortranCInterface_SOURCE_DIR}/Macro.h.in ${FILE} @ONLY)
-endfunction()
-
-function(FortranCInterface_VERIFY)
-  # Check arguments.
-
-  set(lang C)
-  set(quiet 0)
-  set(verify_cxx 0)
-  foreach(arg ${ARGN})
-    if("${arg}" STREQUAL "QUIET")
-      set(quiet 1)
-    elseif("${arg}" STREQUAL "CXX")
-      set(lang CXX)
-      set(verify_cxx 1)
-    else()
-      message(FATAL_ERROR
-        "FortranCInterface_VERIFY - called with unknown argument:\n  ${arg}")
-    endif()
-  endforeach()
-
-  if(NOT CMAKE_${lang}_COMPILER_LOADED)
-    message(FATAL_ERROR
-      "FortranCInterface_VERIFY(${lang}) requires ${lang} to be enabled.")
-  endif()
-
-  # Build the verification project if not yet built.
-  if(NOT DEFINED FortranCInterface_VERIFIED_${lang})
-    set(_desc "Verifying Fortran/${lang} Compiler Compatibility")
-    message(STATUS "${_desc}")
-
-    # Build a sample project which reports symbols.
-    set(CMAKE_TRY_COMPILE_CONFIGURATION Release)
-    try_compile(FortranCInterface_VERIFY_${lang}_COMPILED
-      ${FortranCInterface_BINARY_DIR}/Verify${lang}
-      ${FortranCInterface_SOURCE_DIR}/Verify
-      VerifyFortranC
-      CMAKE_FLAGS -DVERIFY_CXX=${verify_cxx}
-                  -DCMAKE_VERBOSE_MAKEFILE=ON
-                 "-DCMAKE_C_FLAGS:STRING=${CMAKE_C_FLAGS}"
-                 "-DCMAKE_CXX_FLAGS:STRING=${CMAKE_CXX_FLAGS}"
-                 "-DCMAKE_Fortran_FLAGS:STRING=${CMAKE_Fortran_FLAGS}"
-                 "-DCMAKE_C_FLAGS_RELEASE:STRING=${CMAKE_C_FLAGS_RELEASE}"
-                 "-DCMAKE_CXX_FLAGS_RELEASE:STRING=${CMAKE_CXX_FLAGS_RELEASE}"
-                 "-DCMAKE_Fortran_FLAGS_RELEASE:STRING=${CMAKE_Fortran_FLAGS_RELEASE}"
-      OUTPUT_VARIABLE _output)
-    file(WRITE "${FortranCInterface_BINARY_DIR}/Verify${lang}/output.txt" "${_output}")
-
-    # Report results.
-    if(FortranCInterface_VERIFY_${lang}_COMPILED)
-      message(STATUS "${_desc} - Success")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "${_desc} passed with the following output:\n${_output}\n\n")
-      set(FortranCInterface_VERIFIED_${lang} 1 CACHE INTERNAL "Fortran/${lang} compatibility")
-    else()
-      message(STATUS "${_desc} - Failed")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "${_desc} failed with the following output:\n${_output}\n\n")
-      set(FortranCInterface_VERIFIED_${lang} 0 CACHE INTERNAL "Fortran/${lang} compatibility")
-    endif()
-    unset(FortranCInterface_VERIFY_${lang}_COMPILED CACHE)
-  endif()
-
-  # Error if compilers are incompatible.
-  if(NOT FortranCInterface_VERIFIED_${lang} AND NOT quiet)
-    file(READ "${FortranCInterface_BINARY_DIR}/Verify${lang}/output.txt" _output)
-    string(REPLACE "\n" "\n  " _output "${_output}")
-    message(FATAL_ERROR
-      "The Fortran compiler:\n  ${CMAKE_Fortran_COMPILER}\n"
-      "and the ${lang} compiler:\n  ${CMAKE_${lang}_COMPILER}\n"
-      "failed to compile a simple test project using both languages.  "
-      "The output was:\n  ${_output}")
-  endif()
-endfunction()
-
-# Restore including context policies.
-cmake_policy(POP)
diff --git a/share/cmake-3.2/Modules/FortranCInterface/my_module_.c b/share/cmake-3.2/Modules/FortranCInterface/my_module_.c
deleted file mode 100644
index 6510ae9..0000000
--- a/share/cmake-3.2/Modules/FortranCInterface/my_module_.c
+++ /dev/null
@@ -1 +0,0 @@
-void my_module_(void) {}
diff --git a/share/cmake-3.2/Modules/FortranCInterface/mymodule_.c b/share/cmake-3.2/Modules/FortranCInterface/mymodule_.c
deleted file mode 100644
index 5270605..0000000
--- a/share/cmake-3.2/Modules/FortranCInterface/mymodule_.c
+++ /dev/null
@@ -1 +0,0 @@
-void mymodule_(void) {}
diff --git a/share/cmake-3.2/Modules/GNUInstallDirs.cmake b/share/cmake-3.2/Modules/GNUInstallDirs.cmake
deleted file mode 100644
index c61e7e9..0000000
--- a/share/cmake-3.2/Modules/GNUInstallDirs.cmake
+++ /dev/null
@@ -1,282 +0,0 @@
-#.rst:
-# GNUInstallDirs
-# --------------
-#
-# Define GNU standard installation directories
-#
-# Provides install directory variables as defined for GNU software:
-#
-#   http://www.gnu.org/prep/standards/html_node/Directory-Variables.html
-#
-# Inclusion of this module defines the following variables:
-#
-# ``CMAKE_INSTALL_<dir>``
-#   destination for files of a given type
-# ``CMAKE_INSTALL_FULL_<dir>``
-#   corresponding absolute path
-#
-# where <dir> is one of:
-#
-# ``BINDIR``
-#   user executables (bin)
-# ``SBINDIR``
-#   system admin executables (sbin)
-# ``LIBEXECDIR``
-#   program executables (libexec)
-# ``SYSCONFDIR``
-#   read-only single-machine data (etc)
-# ``SHAREDSTATEDIR``
-#   modifiable architecture-independent data (com)
-# ``LOCALSTATEDIR``
-#   modifiable single-machine data (var)
-# ``LIBDIR``
-#   object code libraries (lib or lib64 or lib/<multiarch-tuple> on Debian)
-# ``INCLUDEDIR``
-#   C header files (include)
-# ``OLDINCLUDEDIR``
-#   C header files for non-gcc (/usr/include)
-# ``DATAROOTDIR``
-#   read-only architecture-independent data root (share)
-# ``DATADIR``
-#   read-only architecture-independent data (DATAROOTDIR)
-# ``INFODIR``
-#   info documentation (DATAROOTDIR/info)
-# ``LOCALEDIR``
-#   locale-dependent data (DATAROOTDIR/locale)
-# ``MANDIR``
-#   man documentation (DATAROOTDIR/man)
-# ``DOCDIR``
-#   documentation root (DATAROOTDIR/doc/PROJECT_NAME)
-#
-# Each CMAKE_INSTALL_<dir> value may be passed to the DESTINATION
-# options of install() commands for the corresponding file type.  If the
-# includer does not define a value the above-shown default will be used
-# and the value will appear in the cache for editing by the user.  Each
-# CMAKE_INSTALL_FULL_<dir> value contains an absolute path constructed
-# from the corresponding destination by prepending (if necessary) the
-# value of CMAKE_INSTALL_PREFIX.
-
-#=============================================================================
-# Copyright 2011 Nikita Krupen'ko <krnekit@gmail.com>
-# Copyright 2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Installation directories
-#
-if(NOT DEFINED CMAKE_INSTALL_BINDIR)
-  set(CMAKE_INSTALL_BINDIR "bin" CACHE PATH "user executables (bin)")
-endif()
-
-if(NOT DEFINED CMAKE_INSTALL_SBINDIR)
-  set(CMAKE_INSTALL_SBINDIR "sbin" CACHE PATH "system admin executables (sbin)")
-endif()
-
-if(NOT DEFINED CMAKE_INSTALL_LIBEXECDIR)
-  set(CMAKE_INSTALL_LIBEXECDIR "libexec" CACHE PATH "program executables (libexec)")
-endif()
-
-if(NOT DEFINED CMAKE_INSTALL_SYSCONFDIR)
-  set(CMAKE_INSTALL_SYSCONFDIR "etc" CACHE PATH "read-only single-machine data (etc)")
-endif()
-
-if(NOT DEFINED CMAKE_INSTALL_SHAREDSTATEDIR)
-  set(CMAKE_INSTALL_SHAREDSTATEDIR "com" CACHE PATH "modifiable architecture-independent data (com)")
-endif()
-
-if(NOT DEFINED CMAKE_INSTALL_LOCALSTATEDIR)
-  set(CMAKE_INSTALL_LOCALSTATEDIR "var" CACHE PATH "modifiable single-machine data (var)")
-endif()
-
-# We check if the variable was manually set and not cached, in order to
-# allow projects to set the values as normal variables before including
-# GNUInstallDirs to avoid having the entries cached or user-editable. It
-# replaces the "if(NOT DEFINED CMAKE_INSTALL_XXX)" checks in all the
-# other cases.
-# If CMAKE_INSTALL_LIBDIR is defined, if _libdir_set is false, then the
-# variable is a normal one, otherwise it is a cache one.
-get_property(_libdir_set CACHE CMAKE_INSTALL_LIBDIR PROPERTY TYPE SET)
-if(NOT DEFINED CMAKE_INSTALL_LIBDIR OR (_libdir_set
-    AND DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX
-    AND NOT "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" STREQUAL "${CMAKE_INSTALL_PREFIX}"))
-  # If CMAKE_INSTALL_LIBDIR is not defined, it is always executed.
-  # Otherwise:
-  #  * if _libdir_set is false it is not executed (meaning that it is
-  #    not a cache variable)
-  #  * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is not defined it is
-  #    not executed
-  #  * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX and
-  #    CMAKE_INSTALL_PREFIX are the same string it is not executed.
-  #    _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is updated after the
-  #    execution, of this part of code, therefore at the next inclusion
-  #    of the file, CMAKE_INSTALL_LIBDIR is defined, and the 2 strings
-  #    are equal, meaning that the if is not executed the code the
-  #    second time.
-
-  set(_LIBDIR_DEFAULT "lib")
-  # Override this default 'lib' with 'lib64' iff:
-  #  - we are on Linux system but NOT cross-compiling
-  #  - we are NOT on debian
-  #  - we are on a 64 bits system
-  # reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf
-  # For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if
-  # CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu"
-  # and CMAKE_INSTALL_PREFIX is "/usr"
-  # See http://wiki.debian.org/Multiarch
-  if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX)
-    set(__LAST_LIBDIR_DEFAULT "lib")
-    # __LAST_LIBDIR_DEFAULT is the default value that we compute from
-    # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX, not a cache entry for
-    # the value that was last used as the default.
-    # This value is used to figure out whether the user changed the
-    # CMAKE_INSTALL_LIBDIR value manually, or if the value was the
-    # default one. When CMAKE_INSTALL_PREFIX changes, the value is
-    # updated to the new default, unless the user explicitly changed it.
-  endif()
-  if(CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$"
-      AND NOT CMAKE_CROSSCOMPILING)
-    if (EXISTS "/etc/debian_version") # is this a debian system ?
-      if(CMAKE_LIBRARY_ARCHITECTURE)
-        if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$")
-          set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}")
-        endif()
-        if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX
-            AND "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$")
-          set(__LAST_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}")
-        endif()
-      endif()
-    else() # not debian, rely on CMAKE_SIZEOF_VOID_P:
-      if(NOT DEFINED CMAKE_SIZEOF_VOID_P)
-        message(AUTHOR_WARNING
-          "Unable to determine default CMAKE_INSTALL_LIBDIR directory because no target architecture is known. "
-          "Please enable at least one language before including GNUInstallDirs.")
-      else()
-        if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
-          set(_LIBDIR_DEFAULT "lib64")
-          if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX)
-            set(__LAST_LIBDIR_DEFAULT "lib64")
-          endif()
-        endif()
-      endif()
-    endif()
-  endif()
-  if(NOT DEFINED CMAKE_INSTALL_LIBDIR)
-    set(CMAKE_INSTALL_LIBDIR "${_LIBDIR_DEFAULT}" CACHE PATH "object code libraries (${_LIBDIR_DEFAULT})")
-  elseif(DEFINED __LAST_LIBDIR_DEFAULT
-      AND "${__LAST_LIBDIR_DEFAULT}" STREQUAL "${CMAKE_INSTALL_LIBDIR}")
-    set_property(CACHE CMAKE_INSTALL_LIBDIR PROPERTY VALUE "${_LIBDIR_DEFAULT}")
-  endif()
-endif()
-# Save for next run
-set(_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}" CACHE INTERNAL "CMAKE_INSTALL_PREFIX during last run")
-unset(_libdir_set)
-unset(__LAST_LIBDIR_DEFAULT)
-
-
-if(NOT DEFINED CMAKE_INSTALL_INCLUDEDIR)
-  set(CMAKE_INSTALL_INCLUDEDIR "include" CACHE PATH "C header files (include)")
-endif()
-
-if(NOT DEFINED CMAKE_INSTALL_OLDINCLUDEDIR)
-  set(CMAKE_INSTALL_OLDINCLUDEDIR "/usr/include" CACHE PATH "C header files for non-gcc (/usr/include)")
-endif()
-
-if(NOT DEFINED CMAKE_INSTALL_DATAROOTDIR)
-  set(CMAKE_INSTALL_DATAROOTDIR "share" CACHE PATH "read-only architecture-independent data root (share)")
-endif()
-
-#-----------------------------------------------------------------------------
-# Values whose defaults are relative to DATAROOTDIR.  Store empty values in
-# the cache and store the defaults in local variables if the cache values are
-# not set explicitly.  This auto-updates the defaults as DATAROOTDIR changes.
-
-if(NOT CMAKE_INSTALL_DATADIR)
-  set(CMAKE_INSTALL_DATADIR "" CACHE PATH "read-only architecture-independent data (DATAROOTDIR)")
-  set(CMAKE_INSTALL_DATADIR "${CMAKE_INSTALL_DATAROOTDIR}")
-endif()
-
-if(CMAKE_SYSTEM_NAME STREQUAL "OpenBSD")
-  if(NOT CMAKE_INSTALL_INFODIR)
-    set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (info)")
-    set(CMAKE_INSTALL_INFODIR "info")
-  endif()
-
-  if(NOT CMAKE_INSTALL_MANDIR)
-    set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (man)")
-    set(CMAKE_INSTALL_MANDIR "man")
-  endif()
-else()
-  if(NOT CMAKE_INSTALL_INFODIR)
-    set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (DATAROOTDIR/info)")
-    set(CMAKE_INSTALL_INFODIR "${CMAKE_INSTALL_DATAROOTDIR}/info")
-  endif()
-
-  if(NOT CMAKE_INSTALL_MANDIR)
-    set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (DATAROOTDIR/man)")
-    set(CMAKE_INSTALL_MANDIR "${CMAKE_INSTALL_DATAROOTDIR}/man")
-  endif()
-endif()
-
-if(NOT CMAKE_INSTALL_LOCALEDIR)
-  set(CMAKE_INSTALL_LOCALEDIR "" CACHE PATH "locale-dependent data (DATAROOTDIR/locale)")
-  set(CMAKE_INSTALL_LOCALEDIR "${CMAKE_INSTALL_DATAROOTDIR}/locale")
-endif()
-
-if(NOT CMAKE_INSTALL_DOCDIR)
-  set(CMAKE_INSTALL_DOCDIR "" CACHE PATH "documentation root (DATAROOTDIR/doc/PROJECT_NAME)")
-  set(CMAKE_INSTALL_DOCDIR "${CMAKE_INSTALL_DATAROOTDIR}/doc/${PROJECT_NAME}")
-endif()
-
-#-----------------------------------------------------------------------------
-
-mark_as_advanced(
-  CMAKE_INSTALL_BINDIR
-  CMAKE_INSTALL_SBINDIR
-  CMAKE_INSTALL_LIBEXECDIR
-  CMAKE_INSTALL_SYSCONFDIR
-  CMAKE_INSTALL_SHAREDSTATEDIR
-  CMAKE_INSTALL_LOCALSTATEDIR
-  CMAKE_INSTALL_LIBDIR
-  CMAKE_INSTALL_INCLUDEDIR
-  CMAKE_INSTALL_OLDINCLUDEDIR
-  CMAKE_INSTALL_DATAROOTDIR
-  CMAKE_INSTALL_DATADIR
-  CMAKE_INSTALL_INFODIR
-  CMAKE_INSTALL_LOCALEDIR
-  CMAKE_INSTALL_MANDIR
-  CMAKE_INSTALL_DOCDIR
-  )
-
-# Result directories
-#
-foreach(dir
-    BINDIR
-    SBINDIR
-    LIBEXECDIR
-    SYSCONFDIR
-    SHAREDSTATEDIR
-    LOCALSTATEDIR
-    LIBDIR
-    INCLUDEDIR
-    OLDINCLUDEDIR
-    DATAROOTDIR
-    DATADIR
-    INFODIR
-    LOCALEDIR
-    MANDIR
-    DOCDIR
-    )
-  if(NOT IS_ABSOLUTE ${CMAKE_INSTALL_${dir}})
-    set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}")
-  else()
-    set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_${dir}}")
-  endif()
-endforeach()
diff --git a/share/cmake-3.2/Modules/GenerateExportHeader.cmake b/share/cmake-3.2/Modules/GenerateExportHeader.cmake
deleted file mode 100644
index 0c6256c..0000000
--- a/share/cmake-3.2/Modules/GenerateExportHeader.cmake
+++ /dev/null
@@ -1,403 +0,0 @@
-#.rst:
-# GenerateExportHeader
-# --------------------
-#
-# Function for generation of export macros for libraries
-#
-# This module provides the function GENERATE_EXPORT_HEADER().
-#
-# The ``GENERATE_EXPORT_HEADER`` function can be used to generate a file
-# suitable for preprocessor inclusion which contains EXPORT macros to be
-# used in library classes::
-#
-#    GENERATE_EXPORT_HEADER( LIBRARY_TARGET
-#              [BASE_NAME <base_name>]
-#              [EXPORT_MACRO_NAME <export_macro_name>]
-#              [EXPORT_FILE_NAME <export_file_name>]
-#              [DEPRECATED_MACRO_NAME <deprecated_macro_name>]
-#              [NO_EXPORT_MACRO_NAME <no_export_macro_name>]
-#              [STATIC_DEFINE <static_define>]
-#              [NO_DEPRECATED_MACRO_NAME <no_deprecated_macro_name>]
-#              [DEFINE_NO_DEPRECATED]
-#              [PREFIX_NAME <prefix_name>]
-#    )
-#
-#
-# The target properties :prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>`
-# and :prop_tgt:`VISIBILITY_INLINES_HIDDEN` can be used to add the appropriate
-# compile flags for targets.  See the documentation of those target properties,
-# and the convenience variables
-# :variable:`CMAKE_CXX_VISIBILITY_PRESET <CMAKE_<LANG>_VISIBILITY_PRESET>` and
-# :variable:`CMAKE_VISIBILITY_INLINES_HIDDEN`.
-#
-# By default ``GENERATE_EXPORT_HEADER()`` generates macro names in a file
-# name determined by the name of the library.  This means that in the
-# simplest case, users of ``GenerateExportHeader`` will be equivalent to:
-#
-# .. code-block:: cmake
-#
-#    set(CMAKE_CXX_VISIBILITY_PRESET hidden)
-#    set(CMAKE_VISIBILITY_INLINES_HIDDEN 1)
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib)
-#    install(TARGETS somelib DESTINATION ${LIBRARY_INSTALL_DIR})
-#    install(FILES
-#     someclass.h
-#     ${PROJECT_BINARY_DIR}/somelib_export.h DESTINATION ${INCLUDE_INSTALL_DIR}
-#    )
-#
-#
-# And in the ABI header files:
-#
-# .. code-block:: c++
-#
-#    #include "somelib_export.h"
-#    class SOMELIB_EXPORT SomeClass {
-#      ...
-#    };
-#
-#
-# The CMake fragment will generate a file in the
-# ``${CMAKE_CURRENT_BINARY_DIR}`` called ``somelib_export.h`` containing the
-# macros ``SOMELIB_EXPORT``, ``SOMELIB_NO_EXPORT``, ``SOMELIB_DEPRECATED``,
-# ``SOMELIB_DEPRECATED_EXPORT`` and ``SOMELIB_DEPRECATED_NO_EXPORT``.  The
-# resulting file should be installed with other headers in the library.
-#
-# The ``BASE_NAME`` argument can be used to override the file name and the
-# names used for the macros:
-#
-# .. code-block:: cmake
-#
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib
-#      BASE_NAME other_name
-#    )
-#
-#
-# Generates a file called ``other_name_export.h`` containing the macros
-# ``OTHER_NAME_EXPORT``, ``OTHER_NAME_NO_EXPORT`` and ``OTHER_NAME_DEPRECATED``
-# etc.
-#
-# The ``BASE_NAME`` may be overridden by specifiying other options in the
-# function.  For example:
-#
-# .. code-block:: cmake
-#
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib
-#      EXPORT_MACRO_NAME OTHER_NAME_EXPORT
-#    )
-#
-#
-# creates the macro ``OTHER_NAME_EXPORT`` instead of ``SOMELIB_EXPORT``, but
-# other macros and the generated file name is as default:
-#
-# .. code-block:: cmake
-#
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib
-#      DEPRECATED_MACRO_NAME KDE_DEPRECATED
-#    )
-#
-#
-# creates the macro ``KDE_DEPRECATED`` instead of ``SOMELIB_DEPRECATED``.
-#
-# If ``LIBRARY_TARGET`` is a static library, macros are defined without
-# values.
-#
-# If the same sources are used to create both a shared and a static
-# library, the uppercased symbol ``${BASE_NAME}_STATIC_DEFINE`` should be
-# used when building the static library:
-#
-# .. code-block:: cmake
-#
-#    add_library(shared_variant SHARED ${lib_SRCS})
-#    add_library(static_variant ${lib_SRCS})
-#    generate_export_header(shared_variant BASE_NAME libshared_and_static)
-#    set_target_properties(static_variant PROPERTIES
-#      COMPILE_FLAGS -DLIBSHARED_AND_STATIC_STATIC_DEFINE)
-#
-# This will cause the export macros to expand to nothing when building
-# the static library.
-#
-# If ``DEFINE_NO_DEPRECATED`` is specified, then a macro
-# ``${BASE_NAME}_NO_DEPRECATED`` will be defined This macro can be used to
-# remove deprecated code from preprocessor output:
-#
-# .. code-block:: cmake
-#
-#    option(EXCLUDE_DEPRECATED "Exclude deprecated parts of the library" FALSE)
-#    if (EXCLUDE_DEPRECATED)
-#      set(NO_BUILD_DEPRECATED DEFINE_NO_DEPRECATED)
-#    endif()
-#    generate_export_header(somelib ${NO_BUILD_DEPRECATED})
-#
-#
-# And then in somelib:
-#
-# .. code-block:: c++
-#
-#    class SOMELIB_EXPORT SomeClass
-#    {
-#    public:
-#    #ifndef SOMELIB_NO_DEPRECATED
-#      SOMELIB_DEPRECATED void oldMethod();
-#    #endif
-#    };
-#
-# .. code-block:: c++
-#
-#    #ifndef SOMELIB_NO_DEPRECATED
-#    void SomeClass::oldMethod() {  }
-#    #endif
-#
-#
-# If ``PREFIX_NAME`` is specified, the argument will be used as a prefix to
-# all generated macros.
-#
-# For example:
-#
-# .. code-block:: cmake
-#
-#    generate_export_header(somelib PREFIX_NAME VTK_)
-#
-# Generates the macros ``VTK_SOMELIB_EXPORT`` etc.
-#
-# ::
-#
-#    ADD_COMPILER_EXPORT_FLAGS( [<output_variable>] )
-#
-# The ``ADD_COMPILER_EXPORT_FLAGS`` function adds ``-fvisibility=hidden`` to
-# :variable:`CMAKE_CXX_FLAGS <CMAKE_<LANG>_FLAGS>` if supported, and is a no-op
-# on Windows which does not need extra compiler flags for exporting support.
-# You may optionally pass a single argument to ``ADD_COMPILER_EXPORT_FLAGS``
-# that will be populated with the ``CXX_FLAGS`` required to enable visibility
-# support for the compiler/architecture in use.
-#
-# This function is deprecated.  Set the target properties
-# :prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>` and
-# :prop_tgt:`VISIBILITY_INLINES_HIDDEN` instead.
-
-#=============================================================================
-# Copyright 2011 Stephen Kelly <steveire@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(CMakeParseArguments)
-include(CheckCXXCompilerFlag)
-
-# TODO: Install this macro separately?
-macro(_check_cxx_compiler_attribute _ATTRIBUTE _RESULT)
-  check_cxx_source_compiles("${_ATTRIBUTE} int somefunc() { return 0; }
-    int main() { return somefunc();}" ${_RESULT}
-  )
-endmacro()
-
-macro(_test_compiler_hidden_visibility)
-
-  if(CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.2")
-    set(GCC_TOO_OLD TRUE)
-  elseif(CMAKE_COMPILER_IS_GNUC AND CMAKE_C_COMPILER_VERSION VERSION_LESS "4.2")
-    set(GCC_TOO_OLD TRUE)
-  elseif(CMAKE_CXX_COMPILER_ID MATCHES Intel AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS "12.0")
-    set(_INTEL_TOO_OLD TRUE)
-  endif()
-
-  # Exclude XL here because it misinterprets -fvisibility=hidden even though
-  # the check_cxx_compiler_flag passes
-  if(NOT GCC_TOO_OLD
-      AND NOT _INTEL_TOO_OLD
-      AND NOT WIN32
-      AND NOT CYGWIN
-      AND NOT CMAKE_CXX_COMPILER_ID MATCHES XL
-      AND NOT CMAKE_CXX_COMPILER_ID MATCHES PGI
-      AND NOT CMAKE_CXX_COMPILER_ID MATCHES Watcom)
-    check_cxx_compiler_flag(-fvisibility=hidden COMPILER_HAS_HIDDEN_VISIBILITY)
-    check_cxx_compiler_flag(-fvisibility-inlines-hidden
-      COMPILER_HAS_HIDDEN_INLINE_VISIBILITY)
-    option(USE_COMPILER_HIDDEN_VISIBILITY
-      "Use HIDDEN visibility support if available." ON)
-    mark_as_advanced(USE_COMPILER_HIDDEN_VISIBILITY)
-  endif()
-endmacro()
-
-macro(_test_compiler_has_deprecated)
-  if(CMAKE_CXX_COMPILER_ID MATCHES Borland
-      OR CMAKE_CXX_COMPILER_ID MATCHES HP
-      OR GCC_TOO_OLD
-      OR CMAKE_CXX_COMPILER_ID MATCHES PGI
-      OR CMAKE_CXX_COMPILER_ID MATCHES Watcom)
-    set(COMPILER_HAS_DEPRECATED "" CACHE INTERNAL
-      "Compiler support for a deprecated attribute")
-  else()
-    _check_cxx_compiler_attribute("__attribute__((__deprecated__))"
-      COMPILER_HAS_DEPRECATED_ATTR)
-    if(COMPILER_HAS_DEPRECATED_ATTR)
-      set(COMPILER_HAS_DEPRECATED "${COMPILER_HAS_DEPRECATED_ATTR}"
-        CACHE INTERNAL "Compiler support for a deprecated attribute")
-    else()
-      _check_cxx_compiler_attribute("__declspec(deprecated)"
-        COMPILER_HAS_DEPRECATED)
-    endif()
-  endif()
-endmacro()
-
-get_filename_component(_GENERATE_EXPORT_HEADER_MODULE_DIR
-  "${CMAKE_CURRENT_LIST_FILE}" PATH)
-
-macro(_DO_SET_MACRO_VALUES TARGET_LIBRARY)
-  set(DEFINE_DEPRECATED)
-  set(DEFINE_EXPORT)
-  set(DEFINE_IMPORT)
-  set(DEFINE_NO_EXPORT)
-
-  if (COMPILER_HAS_DEPRECATED_ATTR)
-    set(DEFINE_DEPRECATED "__attribute__ ((__deprecated__))")
-  elseif(COMPILER_HAS_DEPRECATED)
-    set(DEFINE_DEPRECATED "__declspec(deprecated)")
-  endif()
-
-  get_property(type TARGET ${TARGET_LIBRARY} PROPERTY TYPE)
-
-  if(NOT ${type} STREQUAL "STATIC_LIBRARY")
-    if(WIN32)
-      set(DEFINE_EXPORT "__declspec(dllexport)")
-      set(DEFINE_IMPORT "__declspec(dllimport)")
-    elseif(COMPILER_HAS_HIDDEN_VISIBILITY AND USE_COMPILER_HIDDEN_VISIBILITY)
-      set(DEFINE_EXPORT "__attribute__((visibility(\"default\")))")
-      set(DEFINE_IMPORT "__attribute__((visibility(\"default\")))")
-      set(DEFINE_NO_EXPORT "__attribute__((visibility(\"hidden\")))")
-    endif()
-  endif()
-endmacro()
-
-macro(_DO_GENERATE_EXPORT_HEADER TARGET_LIBRARY)
-  # Option overrides
-  set(options DEFINE_NO_DEPRECATED)
-  set(oneValueArgs PREFIX_NAME BASE_NAME EXPORT_MACRO_NAME EXPORT_FILE_NAME
-    DEPRECATED_MACRO_NAME NO_EXPORT_MACRO_NAME STATIC_DEFINE
-    NO_DEPRECATED_MACRO_NAME)
-  set(multiValueArgs)
-
-  cmake_parse_arguments(_GEH "${options}" "${oneValueArgs}" "${multiValueArgs}"
-    ${ARGN})
-
-  set(BASE_NAME "${TARGET_LIBRARY}")
-
-  if(_GEH_BASE_NAME)
-    set(BASE_NAME ${_GEH_BASE_NAME})
-  endif()
-
-  string(TOUPPER ${BASE_NAME} BASE_NAME_UPPER)
-  string(TOLOWER ${BASE_NAME} BASE_NAME_LOWER)
-
-  # Default options
-  set(EXPORT_MACRO_NAME "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_EXPORT")
-  set(NO_EXPORT_MACRO_NAME "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_NO_EXPORT")
-  set(EXPORT_FILE_NAME "${CMAKE_CURRENT_BINARY_DIR}/${BASE_NAME_LOWER}_export.h")
-  set(DEPRECATED_MACRO_NAME "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_DEPRECATED")
-  set(STATIC_DEFINE "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_STATIC_DEFINE")
-  set(NO_DEPRECATED_MACRO_NAME
-    "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_NO_DEPRECATED")
-
-  if(_GEH_UNPARSED_ARGUMENTS)
-    message(FATAL_ERROR "Unknown keywords given to GENERATE_EXPORT_HEADER(): \"${_GEH_UNPARSED_ARGUMENTS}\"")
-  endif()
-
-  if(_GEH_EXPORT_MACRO_NAME)
-    set(EXPORT_MACRO_NAME ${_GEH_PREFIX_NAME}${_GEH_EXPORT_MACRO_NAME})
-  endif()
-  string(MAKE_C_IDENTIFIER ${EXPORT_MACRO_NAME} EXPORT_MACRO_NAME)
-  if(_GEH_EXPORT_FILE_NAME)
-    if(IS_ABSOLUTE ${_GEH_EXPORT_FILE_NAME})
-      set(EXPORT_FILE_NAME ${_GEH_EXPORT_FILE_NAME})
-    else()
-      set(EXPORT_FILE_NAME "${CMAKE_CURRENT_BINARY_DIR}/${_GEH_EXPORT_FILE_NAME}")
-    endif()
-  endif()
-  if(_GEH_DEPRECATED_MACRO_NAME)
-    set(DEPRECATED_MACRO_NAME ${_GEH_PREFIX_NAME}${_GEH_DEPRECATED_MACRO_NAME})
-  endif()
-  string(MAKE_C_IDENTIFIER ${DEPRECATED_MACRO_NAME} DEPRECATED_MACRO_NAME)
-  if(_GEH_NO_EXPORT_MACRO_NAME)
-    set(NO_EXPORT_MACRO_NAME ${_GEH_PREFIX_NAME}${_GEH_NO_EXPORT_MACRO_NAME})
-  endif()
-  string(MAKE_C_IDENTIFIER ${NO_EXPORT_MACRO_NAME} NO_EXPORT_MACRO_NAME)
-  if(_GEH_STATIC_DEFINE)
-    set(STATIC_DEFINE ${_GEH_PREFIX_NAME}${_GEH_STATIC_DEFINE})
-  endif()
-  string(MAKE_C_IDENTIFIER ${STATIC_DEFINE} STATIC_DEFINE)
-
-  if(_GEH_DEFINE_NO_DEPRECATED)
-    set(DEFINE_NO_DEPRECATED TRUE)
-  endif()
-
-  if(_GEH_NO_DEPRECATED_MACRO_NAME)
-    set(NO_DEPRECATED_MACRO_NAME
-      ${_GEH_PREFIX_NAME}${_GEH_NO_DEPRECATED_MACRO_NAME})
-  endif()
-  string(MAKE_C_IDENTIFIER ${NO_DEPRECATED_MACRO_NAME} NO_DEPRECATED_MACRO_NAME)
-
-  set(INCLUDE_GUARD_NAME "${EXPORT_MACRO_NAME}_H")
-
-  get_target_property(EXPORT_IMPORT_CONDITION ${TARGET_LIBRARY} DEFINE_SYMBOL)
-
-  if(NOT EXPORT_IMPORT_CONDITION)
-    set(EXPORT_IMPORT_CONDITION ${TARGET_LIBRARY}_EXPORTS)
-  endif()
-  string(MAKE_C_IDENTIFIER ${EXPORT_IMPORT_CONDITION} EXPORT_IMPORT_CONDITION)
-
-  configure_file("${_GENERATE_EXPORT_HEADER_MODULE_DIR}/exportheader.cmake.in"
-    "${EXPORT_FILE_NAME}" @ONLY)
-endmacro()
-
-function(GENERATE_EXPORT_HEADER TARGET_LIBRARY)
-  get_property(type TARGET ${TARGET_LIBRARY} PROPERTY TYPE)
-  if(NOT ${type} STREQUAL "STATIC_LIBRARY"
-      AND NOT ${type} STREQUAL "SHARED_LIBRARY"
-      AND NOT ${type} STREQUAL "OBJECT_LIBRARY"
-      AND NOT ${type} STREQUAL "MODULE_LIBRARY")
-    message(WARNING "This macro can only be used with libraries")
-    return()
-  endif()
-  _test_compiler_hidden_visibility()
-  _test_compiler_has_deprecated()
-  _do_set_macro_values(${TARGET_LIBRARY})
-  _do_generate_export_header(${TARGET_LIBRARY} ${ARGN})
-endfunction()
-
-function(add_compiler_export_flags)
-  if(NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.12)
-    message(DEPRECATION "The add_compiler_export_flags function is obsolete. Use the CXX_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN target properties instead.")
-  endif()
-
-  _test_compiler_hidden_visibility()
-  _test_compiler_has_deprecated()
-
-  if(NOT (USE_COMPILER_HIDDEN_VISIBILITY AND COMPILER_HAS_HIDDEN_VISIBILITY))
-    # Just return if there are no flags to add.
-    return()
-  endif()
-
-  set (EXTRA_FLAGS "-fvisibility=hidden")
-
-  if(COMPILER_HAS_HIDDEN_INLINE_VISIBILITY)
-    set (EXTRA_FLAGS "${EXTRA_FLAGS} -fvisibility-inlines-hidden")
-  endif()
-
-  # Either return the extra flags needed in the supplied argument, or to the
-  # CMAKE_CXX_FLAGS if no argument is supplied.
-  if(ARGV0)
-    set(${ARGV0} "${EXTRA_FLAGS}" PARENT_SCOPE)
-  else()
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${EXTRA_FLAGS}" PARENT_SCOPE)
-  endif()
-endfunction()
diff --git a/share/cmake-3.2/Modules/GetPrerequisites.cmake b/share/cmake-3.2/Modules/GetPrerequisites.cmake
deleted file mode 100644
index 712a41c..0000000
--- a/share/cmake-3.2/Modules/GetPrerequisites.cmake
+++ /dev/null
@@ -1,941 +0,0 @@
-#.rst:
-# GetPrerequisites
-# ----------------
-#
-# Functions to analyze and list executable file prerequisites.
-#
-# This module provides functions to list the .dll, .dylib or .so files
-# that an executable or shared library file depends on.  (Its
-# prerequisites.)
-#
-# It uses various tools to obtain the list of required shared library
-# files:
-#
-# ::
-#
-#    dumpbin (Windows)
-#    objdump (MinGW on Windows)
-#    ldd (Linux/Unix)
-#    otool (Mac OSX)
-#
-# The following functions are provided by this module:
-#
-# ::
-#
-#    get_prerequisites
-#    list_prerequisites
-#    list_prerequisites_by_glob
-#    gp_append_unique
-#    is_file_executable
-#    gp_item_default_embedded_path
-#      (projects can override with gp_item_default_embedded_path_override)
-#    gp_resolve_item
-#      (projects can override with gp_resolve_item_override)
-#    gp_resolved_file_type
-#      (projects can override with gp_resolved_file_type_override)
-#    gp_file_type
-#
-# Requires CMake 2.6 or greater because it uses function, break, return
-# and PARENT_SCOPE.
-#
-# ::
-#
-#   GET_PREREQUISITES(<target> <prerequisites_var> <exclude_system> <recurse>
-#                     <exepath> <dirs> [<rpaths>])
-#
-# Get the list of shared library files required by <target>.  The list
-# in the variable named <prerequisites_var> should be empty on first
-# entry to this function.  On exit, <prerequisites_var> will contain the
-# list of required shared library files.
-#
-# <target> is the full path to an executable file.  <prerequisites_var>
-# is the name of a CMake variable to contain the results.
-# <exclude_system> must be 0 or 1 indicating whether to include or
-# exclude "system" prerequisites.  If <recurse> is set to 1 all
-# prerequisites will be found recursively, if set to 0 only direct
-# prerequisites are listed.  <exepath> is the path to the top level
-# executable used for @executable_path replacment on the Mac.  <dirs> is
-# a list of paths where libraries might be found: these paths are
-# searched first when a target without any path info is given.  Then
-# standard system locations are also searched: PATH, Framework
-# locations, /usr/lib...
-#
-# ::
-#
-#   LIST_PREREQUISITES(<target> [<recurse> [<exclude_system> [<verbose>]]])
-#
-# Print a message listing the prerequisites of <target>.
-#
-# <target> is the name of a shared library or executable target or the
-# full path to a shared library or executable file.  If <recurse> is set
-# to 1 all prerequisites will be found recursively, if set to 0 only
-# direct prerequisites are listed.  <exclude_system> must be 0 or 1
-# indicating whether to include or exclude "system" prerequisites.  With
-# <verbose> set to 0 only the full path names of the prerequisites are
-# printed, set to 1 extra informatin will be displayed.
-#
-# ::
-#
-#   LIST_PREREQUISITES_BY_GLOB(<glob_arg> <glob_exp>)
-#
-# Print the prerequisites of shared library and executable files
-# matching a globbing pattern.  <glob_arg> is GLOB or GLOB_RECURSE and
-# <glob_exp> is a globbing expression used with "file(GLOB" or
-# "file(GLOB_RECURSE" to retrieve a list of matching files.  If a
-# matching file is executable, its prerequisites are listed.
-#
-# Any additional (optional) arguments provided are passed along as the
-# optional arguments to the list_prerequisites calls.
-#
-# ::
-#
-#   GP_APPEND_UNIQUE(<list_var> <value>)
-#
-# Append <value> to the list variable <list_var> only if the value is
-# not already in the list.
-#
-# ::
-#
-#   IS_FILE_EXECUTABLE(<file> <result_var>)
-#
-# Return 1 in <result_var> if <file> is a binary executable, 0
-# otherwise.
-#
-# ::
-#
-#   GP_ITEM_DEFAULT_EMBEDDED_PATH(<item> <default_embedded_path_var>)
-#
-# Return the path that others should refer to the item by when the item
-# is embedded inside a bundle.
-#
-# Override on a per-project basis by providing a project-specific
-# gp_item_default_embedded_path_override function.
-#
-# ::
-#
-#   GP_RESOLVE_ITEM(<context> <item> <exepath> <dirs> <resolved_item_var>
-#                   [<rpaths>])
-#
-# Resolve an item into an existing full path file.
-#
-# Override on a per-project basis by providing a project-specific
-# gp_resolve_item_override function.
-#
-# ::
-#
-#   GP_RESOLVED_FILE_TYPE(<original_file> <file> <exepath> <dirs> <type_var>
-#                         [<rpaths>])
-#
-# Return the type of <file> with respect to <original_file>.  String
-# describing type of prerequisite is returned in variable named
-# <type_var>.
-#
-# Use <exepath> and <dirs> if necessary to resolve non-absolute <file>
-# values -- but only for non-embedded items.
-#
-# Possible types are:
-#
-# ::
-#
-#    system
-#    local
-#    embedded
-#    other
-#
-# Override on a per-project basis by providing a project-specific
-# gp_resolved_file_type_override function.
-#
-# ::
-#
-#   GP_FILE_TYPE(<original_file> <file> <type_var>)
-#
-# Return the type of <file> with respect to <original_file>.  String
-# describing type of prerequisite is returned in variable named
-# <type_var>.
-#
-# Possible types are:
-#
-# ::
-#
-#    system
-#    local
-#    embedded
-#    other
-
-#=============================================================================
-# Copyright 2008-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-function(gp_append_unique list_var value)
-  set(contains 0)
-
-  foreach(item ${${list_var}})
-    if(item STREQUAL "${value}")
-      set(contains 1)
-      break()
-    endif()
-  endforeach()
-
-  if(NOT contains)
-    set(${list_var} ${${list_var}} "${value}" PARENT_SCOPE)
-  endif()
-endfunction()
-
-
-function(is_file_executable file result_var)
-  #
-  # A file is not executable until proven otherwise:
-  #
-  set(${result_var} 0 PARENT_SCOPE)
-
-  get_filename_component(file_full "${file}" ABSOLUTE)
-  string(TOLOWER "${file_full}" file_full_lower)
-
-  # If file name ends in .exe on Windows, *assume* executable:
-  #
-  if(WIN32 AND NOT UNIX)
-    if("${file_full_lower}" MATCHES "\\.exe$")
-      set(${result_var} 1 PARENT_SCOPE)
-      return()
-    endif()
-
-    # A clause could be added here that uses output or return value of dumpbin
-    # to determine ${result_var}. In 99%+? practical cases, the exe name
-    # match will be sufficient...
-    #
-  endif()
-
-  # Use the information returned from the Unix shell command "file" to
-  # determine if ${file_full} should be considered an executable file...
-  #
-  # If the file command's output contains "executable" and does *not* contain
-  # "text" then it is likely an executable suitable for prerequisite analysis
-  # via the get_prerequisites macro.
-  #
-  if(UNIX)
-    if(NOT file_cmd)
-      find_program(file_cmd "file")
-      mark_as_advanced(file_cmd)
-    endif()
-
-    if(file_cmd)
-      execute_process(COMMAND "${file_cmd}" "${file_full}"
-        OUTPUT_VARIABLE file_ov
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        )
-
-      # Replace the name of the file in the output with a placeholder token
-      # (the string " _file_full_ ") so that just in case the path name of
-      # the file contains the word "text" or "executable" we are not fooled
-      # into thinking "the wrong thing" because the file name matches the
-      # other 'file' command output we are looking for...
-      #
-      string(REPLACE "${file_full}" " _file_full_ " file_ov "${file_ov}")
-      string(TOLOWER "${file_ov}" file_ov)
-
-      #message(STATUS "file_ov='${file_ov}'")
-      if("${file_ov}" MATCHES "executable")
-        #message(STATUS "executable!")
-        if("${file_ov}" MATCHES "text")
-          #message(STATUS "but text, so *not* a binary executable!")
-        else()
-          set(${result_var} 1 PARENT_SCOPE)
-          return()
-        endif()
-      endif()
-
-      # Also detect position independent executables on Linux,
-      # where "file" gives "shared object ... (uses shared libraries)"
-      if("${file_ov}" MATCHES "shared object.*\(uses shared libs\)")
-        set(${result_var} 1 PARENT_SCOPE)
-        return()
-      endif()
-
-    else()
-      message(STATUS "warning: No 'file' command, skipping execute_process...")
-    endif()
-  endif()
-endfunction()
-
-
-function(gp_item_default_embedded_path item default_embedded_path_var)
-
-  # On Windows and Linux, "embed" prerequisites in the same directory
-  # as the executable by default:
-  #
-  set(path "@executable_path")
-  set(overridden 0)
-
-  # On the Mac, relative to the executable depending on the type
-  # of the thing we are embedding:
-  #
-  if(APPLE)
-    #
-    # The assumption here is that all executables in the bundle will be
-    # in same-level-directories inside the bundle. The parent directory
-    # of an executable inside the bundle should be MacOS or a sibling of
-    # MacOS and all embedded paths returned from here will begin with
-    # "@executable_path/../" and will work from all executables in all
-    # such same-level-directories inside the bundle.
-    #
-
-    # By default, embed things right next to the main bundle executable:
-    #
-    set(path "@executable_path/../../Contents/MacOS")
-
-    # Embed .dylibs right next to the main bundle executable:
-    #
-    if(item MATCHES "\\.dylib$")
-      set(path "@executable_path/../MacOS")
-      set(overridden 1)
-    endif()
-
-    # Embed frameworks in the embedded "Frameworks" directory (sibling of MacOS):
-    #
-    if(NOT overridden)
-      if(item MATCHES "[^/]+\\.framework/")
-        set(path "@executable_path/../Frameworks")
-        set(overridden 1)
-      endif()
-    endif()
-  endif()
-
-  # Provide a hook so that projects can override the default embedded location
-  # of any given library by whatever logic they choose:
-  #
-  if(COMMAND gp_item_default_embedded_path_override)
-    gp_item_default_embedded_path_override("${item}" path)
-  endif()
-
-  set(${default_embedded_path_var} "${path}" PARENT_SCOPE)
-endfunction()
-
-
-function(gp_resolve_item context item exepath dirs resolved_item_var)
-  set(resolved 0)
-  set(resolved_item "${item}")
-  set(rpaths "${ARGV5}")
-
-  # Is it already resolved?
-  #
-  if(IS_ABSOLUTE "${resolved_item}" AND EXISTS "${resolved_item}")
-    set(resolved 1)
-  endif()
-
-  if(NOT resolved)
-    if(item MATCHES "^@executable_path")
-      #
-      # @executable_path references are assumed relative to exepath
-      #
-      string(REPLACE "@executable_path" "${exepath}" ri "${item}")
-      get_filename_component(ri "${ri}" ABSOLUTE)
-
-      if(EXISTS "${ri}")
-        #message(STATUS "info: embedded item exists (${ri})")
-        set(resolved 1)
-        set(resolved_item "${ri}")
-      else()
-        message(STATUS "warning: embedded item does not exist '${ri}'")
-      endif()
-    endif()
-  endif()
-
-  if(NOT resolved)
-    if(item MATCHES "^@loader_path")
-      #
-      # @loader_path references are assumed relative to the
-      # PATH of the given "context" (presumably another library)
-      #
-      get_filename_component(contextpath "${context}" PATH)
-      string(REPLACE "@loader_path" "${contextpath}" ri "${item}")
-      get_filename_component(ri "${ri}" ABSOLUTE)
-
-      if(EXISTS "${ri}")
-        #message(STATUS "info: embedded item exists (${ri})")
-        set(resolved 1)
-        set(resolved_item "${ri}")
-      else()
-        message(STATUS "warning: embedded item does not exist '${ri}'")
-      endif()
-    endif()
-  endif()
-
-  if(NOT resolved)
-    if(item MATCHES "^@rpath")
-      #
-      # @rpath references are relative to the paths built into the binaries with -rpath
-      # We handle this case like we do for other Unixes
-      #
-      string(REPLACE "@rpath/" "" norpath_item "${item}")
-
-      set(ri "ri-NOTFOUND")
-      find_file(ri "${norpath_item}" ${exepath} ${dirs} ${rpaths} NO_DEFAULT_PATH)
-      if(ri)
-        #message(STATUS "info: 'find_file' in exepath/dirs/rpaths (${ri})")
-        set(resolved 1)
-        set(resolved_item "${ri}")
-        set(ri "ri-NOTFOUND")
-      endif()
-
-    endif()
-  endif()
-
-  if(NOT resolved)
-    set(ri "ri-NOTFOUND")
-    find_file(ri "${item}" ${exepath} ${dirs} NO_DEFAULT_PATH)
-    find_file(ri "${item}" ${exepath} ${dirs} /usr/lib)
-    if(ri)
-      #message(STATUS "info: 'find_file' in exepath/dirs (${ri})")
-      set(resolved 1)
-      set(resolved_item "${ri}")
-      set(ri "ri-NOTFOUND")
-    endif()
-  endif()
-
-  if(NOT resolved)
-    if(item MATCHES "[^/]+\\.framework/")
-      set(fw "fw-NOTFOUND")
-      find_file(fw "${item}"
-        "~/Library/Frameworks"
-        "/Library/Frameworks"
-        "/System/Library/Frameworks"
-      )
-      if(fw)
-        #message(STATUS "info: 'find_file' found framework (${fw})")
-        set(resolved 1)
-        set(resolved_item "${fw}")
-        set(fw "fw-NOTFOUND")
-      endif()
-    endif()
-  endif()
-
-  # Using find_program on Windows will find dll files that are in the PATH.
-  # (Converting simple file names into full path names if found.)
-  #
-  if(WIN32 AND NOT UNIX)
-  if(NOT resolved)
-    set(ri "ri-NOTFOUND")
-    find_program(ri "${item}" PATHS "${exepath};${dirs}" NO_DEFAULT_PATH)
-    find_program(ri "${item}" PATHS "${exepath};${dirs}")
-    if(ri)
-      #message(STATUS "info: 'find_program' in exepath/dirs (${ri})")
-      set(resolved 1)
-      set(resolved_item "${ri}")
-      set(ri "ri-NOTFOUND")
-    endif()
-  endif()
-  endif()
-
-  # Provide a hook so that projects can override item resolution
-  # by whatever logic they choose:
-  #
-  if(COMMAND gp_resolve_item_override)
-    gp_resolve_item_override("${context}" "${item}" "${exepath}" "${dirs}" resolved_item resolved)
-  endif()
-
-  if(NOT resolved)
-    message(STATUS "
-warning: cannot resolve item '${item}'
-
-  possible problems:
-    need more directories?
-    need to use InstallRequiredSystemLibraries?
-    run in install tree instead of build tree?
-")
-#    message(STATUS "
-#******************************************************************************
-#warning: cannot resolve item '${item}'
-#
-#  possible problems:
-#    need more directories?
-#    need to use InstallRequiredSystemLibraries?
-#    run in install tree instead of build tree?
-#
-#    context='${context}'
-#    item='${item}'
-#    exepath='${exepath}'
-#    dirs='${dirs}'
-#    resolved_item_var='${resolved_item_var}'
-#******************************************************************************
-#")
-  endif()
-
-  set(${resolved_item_var} "${resolved_item}" PARENT_SCOPE)
-endfunction()
-
-
-function(gp_resolved_file_type original_file file exepath dirs type_var)
-  set(rpaths "${ARGV5}")
-  #message(STATUS "**")
-
-  if(NOT IS_ABSOLUTE "${original_file}")
-    message(STATUS "warning: gp_resolved_file_type expects absolute full path for first arg original_file")
-  endif()
-
-  set(is_embedded 0)
-  set(is_local 0)
-  set(is_system 0)
-
-  set(resolved_file "${file}")
-
-  if("${file}" MATCHES "^@(executable|loader)_path")
-    set(is_embedded 1)
-  endif()
-
-  if(NOT is_embedded)
-    if(NOT IS_ABSOLUTE "${file}")
-      gp_resolve_item("${original_file}" "${file}" "${exepath}" "${dirs}" resolved_file "${rpaths}")
-    endif()
-
-    string(TOLOWER "${original_file}" original_lower)
-    string(TOLOWER "${resolved_file}" lower)
-
-    if(UNIX)
-      if(resolved_file MATCHES "^(/lib/|/lib32/|/lib64/|/usr/lib/|/usr/lib32/|/usr/lib64/|/usr/X11R6/|/usr/bin/)")
-        set(is_system 1)
-      endif()
-    endif()
-
-    if(APPLE)
-      if(resolved_file MATCHES "^(/System/Library/|/usr/lib/)")
-        set(is_system 1)
-      endif()
-    endif()
-
-    if(WIN32)
-      string(TOLOWER "$ENV{SystemRoot}" sysroot)
-      file(TO_CMAKE_PATH "${sysroot}" sysroot)
-
-      string(TOLOWER "$ENV{windir}" windir)
-      file(TO_CMAKE_PATH "${windir}" windir)
-
-      if(lower MATCHES "^(${sysroot}/sys(tem|wow)|${windir}/sys(tem|wow)|(.*/)*msvc[^/]+dll)")
-        set(is_system 1)
-      endif()
-
-      if(UNIX)
-        # if cygwin, we can get the properly formed windows paths from cygpath
-        find_program(CYGPATH_EXECUTABLE cygpath)
-
-        if(CYGPATH_EXECUTABLE)
-          execute_process(COMMAND ${CYGPATH_EXECUTABLE} -W
-                          OUTPUT_VARIABLE env_windir
-                          OUTPUT_STRIP_TRAILING_WHITESPACE)
-          execute_process(COMMAND ${CYGPATH_EXECUTABLE} -S
-                          OUTPUT_VARIABLE env_sysdir
-                          OUTPUT_STRIP_TRAILING_WHITESPACE)
-          string(TOLOWER "${env_windir}" windir)
-          string(TOLOWER "${env_sysdir}" sysroot)
-
-          if(lower MATCHES "^(${sysroot}/sys(tem|wow)|${windir}/sys(tem|wow)|(.*/)*msvc[^/]+dll)")
-            set(is_system 1)
-          endif()
-        endif()
-      endif()
-    endif()
-
-    if(NOT is_system)
-      get_filename_component(original_path "${original_lower}" PATH)
-      get_filename_component(path "${lower}" PATH)
-      if(original_path STREQUAL path)
-        set(is_local 1)
-      else()
-        string(LENGTH "${original_path}/" original_length)
-        string(LENGTH "${lower}" path_length)
-        if(${path_length} GREATER ${original_length})
-          string(SUBSTRING "${lower}" 0 ${original_length} path)
-          if("${original_path}/" STREQUAL path)
-            set(is_embedded 1)
-          endif()
-        endif()
-      endif()
-    endif()
-  endif()
-
-  # Return type string based on computed booleans:
-  #
-  set(type "other")
-
-  if(is_system)
-    set(type "system")
-  elseif(is_embedded)
-    set(type "embedded")
-  elseif(is_local)
-    set(type "local")
-  endif()
-
-  #message(STATUS "gp_resolved_file_type: '${file}' '${resolved_file}'")
-  #message(STATUS "                type: '${type}'")
-
-  if(NOT is_embedded)
-    if(NOT IS_ABSOLUTE "${resolved_file}")
-      if(lower MATCHES "^msvc[^/]+dll" AND is_system)
-        message(STATUS "info: non-absolute msvc file '${file}' returning type '${type}'")
-      else()
-        message(STATUS "warning: gp_resolved_file_type non-absolute file '${file}' returning type '${type}' -- possibly incorrect")
-      endif()
-    endif()
-  endif()
-
-  # Provide a hook so that projects can override the decision on whether a
-  # library belongs to the system or not by whatever logic they choose:
-  #
-  if(COMMAND gp_resolved_file_type_override)
-    gp_resolved_file_type_override("${resolved_file}" type)
-  endif()
-
-  set(${type_var} "${type}" PARENT_SCOPE)
-
-  #message(STATUS "**")
-endfunction()
-
-
-function(gp_file_type original_file file type_var)
-  if(NOT IS_ABSOLUTE "${original_file}")
-    message(STATUS "warning: gp_file_type expects absolute full path for first arg original_file")
-  endif()
-
-  get_filename_component(exepath "${original_file}" PATH)
-
-  set(type "")
-  gp_resolved_file_type("${original_file}" "${file}" "${exepath}" "" type)
-
-  set(${type_var} "${type}" PARENT_SCOPE)
-endfunction()
-
-
-function(get_prerequisites target prerequisites_var exclude_system recurse exepath dirs)
-  set(verbose 0)
-  set(eol_char "E")
-  set(rpaths "${ARGV6}")
-
-  if(NOT IS_ABSOLUTE "${target}")
-    message("warning: target '${target}' is not absolute...")
-  endif()
-
-  if(NOT EXISTS "${target}")
-    message("warning: target '${target}' does not exist...")
-  endif()
-
-  set(gp_cmd_paths ${gp_cmd_paths}
-    "C:/Program Files/Microsoft Visual Studio 9.0/VC/bin"
-    "C:/Program Files (x86)/Microsoft Visual Studio 9.0/VC/bin"
-    "C:/Program Files/Microsoft Visual Studio 8/VC/BIN"
-    "C:/Program Files (x86)/Microsoft Visual Studio 8/VC/BIN"
-    "C:/Program Files/Microsoft Visual Studio .NET 2003/VC7/BIN"
-    "C:/Program Files (x86)/Microsoft Visual Studio .NET 2003/VC7/BIN"
-    "/usr/local/bin"
-    "/usr/bin"
-    )
-
-  # <setup-gp_tool-vars>
-  #
-  # Try to choose the right tool by default. Caller can set gp_tool prior to
-  # calling this function to force using a different tool.
-  #
-  if(NOT gp_tool)
-    set(gp_tool "ldd")
-
-    if(APPLE)
-      set(gp_tool "otool")
-    endif()
-
-    if(WIN32 AND NOT UNIX) # This is how to check for cygwin, har!
-      find_program(gp_dumpbin "dumpbin" PATHS ${gp_cmd_paths})
-      if(gp_dumpbin)
-        set(gp_tool "dumpbin")
-      else() # Try harder. Maybe we're on MinGW
-        set(gp_tool "objdump")
-      endif()
-    endif()
-  endif()
-
-  find_program(gp_cmd ${gp_tool} PATHS ${gp_cmd_paths})
-
-  if(NOT gp_cmd)
-    message(STATUS "warning: could not find '${gp_tool}' - cannot analyze prerequisites...")
-    return()
-  endif()
-
-  if(gp_tool STREQUAL "ldd")
-    set(gp_cmd_args "")
-    set(gp_regex "^[\t ]*[^\t ]+ => ([^\t\(]+) .*${eol_char}$")
-    set(gp_regex_error "not found${eol_char}$")
-    set(gp_regex_fallback "^[\t ]*([^\t ]+) => ([^\t ]+).*${eol_char}$")
-    set(gp_regex_cmp_count 1)
-  elseif(gp_tool STREQUAL "otool")
-    set(gp_cmd_args "-L")
-    set(gp_regex "^\t([^\t]+) \\(compatibility version ([0-9]+.[0-9]+.[0-9]+), current version ([0-9]+.[0-9]+.[0-9]+)\\)${eol_char}$")
-    set(gp_regex_error "")
-    set(gp_regex_fallback "")
-    set(gp_regex_cmp_count 3)
-  elseif(gp_tool STREQUAL "dumpbin")
-    set(gp_cmd_args "/dependents")
-    set(gp_regex "^    ([^ ].*[Dd][Ll][Ll])${eol_char}$")
-    set(gp_regex_error "")
-    set(gp_regex_fallback "")
-    set(gp_regex_cmp_count 1)
-  elseif(gp_tool STREQUAL "objdump")
-    set(gp_cmd_args "-p")
-    set(gp_regex "^\t*DLL Name: (.*\\.[Dd][Ll][Ll])${eol_char}$")
-    set(gp_regex_error "")
-    set(gp_regex_fallback "")
-    set(gp_regex_cmp_count 1)
-  else()
-    message(STATUS "warning: gp_tool='${gp_tool}' is an unknown tool...")
-    message(STATUS "CMake function get_prerequisites needs more code to handle '${gp_tool}'")
-    message(STATUS "Valid gp_tool values are dumpbin, ldd, objdump and otool.")
-    return()
-  endif()
-
-
-  if(gp_tool STREQUAL "dumpbin")
-    # When running dumpbin, it also needs the "Common7/IDE" directory in the
-    # PATH. It will already be in the PATH if being run from a Visual Studio
-    # command prompt. Add it to the PATH here in case we are running from a
-    # different command prompt.
-    #
-    get_filename_component(gp_cmd_dir "${gp_cmd}" PATH)
-    get_filename_component(gp_cmd_dlls_dir "${gp_cmd_dir}/../../Common7/IDE" ABSOLUTE)
-    # Use cmake paths as a user may have a PATH element ending with a backslash.
-    # This will escape the list delimiter and create havoc!
-    if(EXISTS "${gp_cmd_dlls_dir}")
-      # only add to the path if it is not already in the path
-      set(gp_found_cmd_dlls_dir 0)
-      file(TO_CMAKE_PATH "$ENV{PATH}" env_path)
-      foreach(gp_env_path_element ${env_path})
-        if(gp_env_path_element STREQUAL gp_cmd_dlls_dir)
-          set(gp_found_cmd_dlls_dir 1)
-        endif()
-      endforeach()
-
-      if(NOT gp_found_cmd_dlls_dir)
-        file(TO_NATIVE_PATH "${gp_cmd_dlls_dir}" gp_cmd_dlls_dir)
-        set(ENV{PATH} "$ENV{PATH};${gp_cmd_dlls_dir}")
-      endif()
-    endif()
-  endif()
-  #
-  # </setup-gp_tool-vars>
-
-  if(gp_tool STREQUAL "ldd")
-    set(old_ld_env "$ENV{LD_LIBRARY_PATH}")
-    set(new_ld_env "${exepath}")
-    foreach(dir ${dirs})
-      set(new_ld_env "${new_ld_env}:${dir}")
-    endforeach()
-    set(ENV{LD_LIBRARY_PATH} "${new_ld_env}:$ENV{LD_LIBRARY_PATH}")
-  endif()
-
-
-  # Track new prerequisites at each new level of recursion. Start with an
-  # empty list at each level:
-  #
-  set(unseen_prereqs)
-
-  # Run gp_cmd on the target:
-  #
-  execute_process(
-    COMMAND ${gp_cmd} ${gp_cmd_args} ${target}
-    OUTPUT_VARIABLE gp_cmd_ov
-    )
-
-  if(gp_tool STREQUAL "ldd")
-    set(ENV{LD_LIBRARY_PATH} "${old_ld_env}")
-  endif()
-
-  if(verbose)
-    message(STATUS "<RawOutput cmd='${gp_cmd} ${gp_cmd_args} ${target}'>")
-    message(STATUS "gp_cmd_ov='${gp_cmd_ov}'")
-    message(STATUS "</RawOutput>")
-  endif()
-
-  get_filename_component(target_dir "${target}" PATH)
-
-  # Convert to a list of lines:
-  #
-  string(REPLACE ";" "\\;" candidates "${gp_cmd_ov}")
-  string(REPLACE "\n" "${eol_char};" candidates "${candidates}")
-
-  # check for install id and remove it from list, since otool -L can include a
-  # reference to itself
-  set(gp_install_id)
-  if(gp_tool STREQUAL "otool")
-    execute_process(
-      COMMAND otool -D ${target}
-      OUTPUT_VARIABLE gp_install_id_ov
-      )
-    # second line is install name
-    string(REGEX REPLACE ".*:\n" "" gp_install_id "${gp_install_id_ov}")
-    if(gp_install_id)
-      # trim
-      string(REGEX MATCH "[^\n ].*[^\n ]" gp_install_id "${gp_install_id}")
-      #message("INSTALL ID is \"${gp_install_id}\"")
-    endif()
-  endif()
-
-  # Analyze each line for file names that match the regular expression:
-  #
-  foreach(candidate ${candidates})
-  if("${candidate}" MATCHES "${gp_regex}")
-
-    # Extract information from each candidate:
-    if(gp_regex_error AND "${candidate}" MATCHES "${gp_regex_error}")
-      string(REGEX REPLACE "${gp_regex_fallback}" "\\1" raw_item "${candidate}")
-    else()
-      string(REGEX REPLACE "${gp_regex}" "\\1" raw_item "${candidate}")
-    endif()
-
-    if(gp_regex_cmp_count GREATER 1)
-      string(REGEX REPLACE "${gp_regex}" "\\2" raw_compat_version "${candidate}")
-      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\1" compat_major_version "${raw_compat_version}")
-      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\2" compat_minor_version "${raw_compat_version}")
-      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\3" compat_patch_version "${raw_compat_version}")
-    endif()
-
-    if(gp_regex_cmp_count GREATER 2)
-      string(REGEX REPLACE "${gp_regex}" "\\3" raw_current_version "${candidate}")
-      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\1" current_major_version "${raw_current_version}")
-      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\2" current_minor_version "${raw_current_version}")
-      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\3" current_patch_version "${raw_current_version}")
-    endif()
-
-    # Use the raw_item as the list entries returned by this function. Use the
-    # gp_resolve_item function to resolve it to an actual full path file if
-    # necessary.
-    #
-    set(item "${raw_item}")
-
-    # Add each item unless it is excluded:
-    #
-    set(add_item 1)
-
-    if(item STREQUAL gp_install_id)
-      set(add_item 0)
-    endif()
-
-    if(add_item AND ${exclude_system})
-      set(type "")
-      gp_resolved_file_type("${target}" "${item}" "${exepath}" "${dirs}" type "${rpaths}")
-
-      if(type STREQUAL "system")
-        set(add_item 0)
-      endif()
-    endif()
-
-    if(add_item)
-      list(LENGTH ${prerequisites_var} list_length_before_append)
-      gp_append_unique(${prerequisites_var} "${item}")
-      list(LENGTH ${prerequisites_var} list_length_after_append)
-
-      if(${recurse})
-        # If item was really added, this is the first time we have seen it.
-        # Add it to unseen_prereqs so that we can recursively add *its*
-        # prerequisites...
-        #
-        # But first: resolve its name to an absolute full path name such
-        # that the analysis tools can simply accept it as input.
-        #
-        if(NOT list_length_before_append EQUAL list_length_after_append)
-          gp_resolve_item("${target}" "${item}" "${exepath}" "${dirs}" resolved_item "${rpaths}")
-          set(unseen_prereqs ${unseen_prereqs} "${resolved_item}")
-        endif()
-      endif()
-    endif()
-  else()
-    if(verbose)
-      message(STATUS "ignoring non-matching line: '${candidate}'")
-    endif()
-  endif()
-  endforeach()
-
-  list(LENGTH ${prerequisites_var} prerequisites_var_length)
-  if(prerequisites_var_length GREATER 0)
-    list(SORT ${prerequisites_var})
-  endif()
-  if(${recurse})
-    set(more_inputs ${unseen_prereqs})
-    foreach(input ${more_inputs})
-      get_prerequisites("${input}" ${prerequisites_var} ${exclude_system} ${recurse} "${exepath}" "${dirs}" "${rpaths}")
-    endforeach()
-  endif()
-
-  set(${prerequisites_var} ${${prerequisites_var}} PARENT_SCOPE)
-endfunction()
-
-
-function(list_prerequisites target)
-  if("${ARGV1}" STREQUAL "")
-    set(all 1)
-  else()
-    set(all "${ARGV1}")
-  endif()
-
-  if("${ARGV2}" STREQUAL "")
-    set(exclude_system 0)
-  else()
-    set(exclude_system "${ARGV2}")
-  endif()
-
-  if("${ARGV3}" STREQUAL "")
-    set(verbose 0)
-  else()
-    set(verbose "${ARGV3}")
-  endif()
-
-  set(count 0)
-  set(count_str "")
-  set(print_count "${verbose}")
-  set(print_prerequisite_type "${verbose}")
-  set(print_target "${verbose}")
-  set(type_str "")
-
-  get_filename_component(exepath "${target}" PATH)
-
-  set(prereqs "")
-  get_prerequisites("${target}" prereqs ${exclude_system} ${all} "${exepath}" "")
-
-  if(print_target)
-    message(STATUS "File '${target}' depends on:")
-  endif()
-
-  foreach(d ${prereqs})
-    math(EXPR count "${count} + 1")
-
-    if(print_count)
-      set(count_str "${count}. ")
-    endif()
-
-    if(print_prerequisite_type)
-      gp_file_type("${target}" "${d}" type)
-      set(type_str " (${type})")
-    endif()
-
-    message(STATUS "${count_str}${d}${type_str}")
-  endforeach()
-endfunction()
-
-
-function(list_prerequisites_by_glob glob_arg glob_exp)
-  message(STATUS "=============================================================================")
-  message(STATUS "List prerequisites of executables matching ${glob_arg} '${glob_exp}'")
-  message(STATUS "")
-  file(${glob_arg} file_list ${glob_exp})
-  foreach(f ${file_list})
-    is_file_executable("${f}" is_f_executable)
-    if(is_f_executable)
-      message(STATUS "=============================================================================")
-      list_prerequisites("${f}" ${ARGN})
-      message(STATUS "")
-    endif()
-  endforeach()
-endfunction()
diff --git a/share/cmake-3.2/Modules/InstallRequiredSystemLibraries.cmake b/share/cmake-3.2/Modules/InstallRequiredSystemLibraries.cmake
deleted file mode 100644
index d8ede1c..0000000
--- a/share/cmake-3.2/Modules/InstallRequiredSystemLibraries.cmake
+++ /dev/null
@@ -1,491 +0,0 @@
-#.rst:
-# InstallRequiredSystemLibraries
-# ------------------------------
-#
-#
-#
-# By including this file, all library files listed in the variable
-# CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS will be installed with
-# install(PROGRAMS ...) into bin for WIN32 and lib for non-WIN32.  If
-# CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP is set to TRUE before including
-# this file, then the INSTALL command is not called.  The user can use
-# the variable CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS to use a custom install
-# command and install them however they want.  If it is the MSVC
-# compiler, then the microsoft run time libraries will be found and
-# automatically added to the CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS, and
-# installed.  If CMAKE_INSTALL_DEBUG_LIBRARIES is set and it is the MSVC
-# compiler, then the debug libraries are installed when available.  If
-# CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY is set then only the debug
-# libraries are installed when both debug and release are available.  If
-# CMAKE_INSTALL_MFC_LIBRARIES is set then the MFC run time libraries are
-# installed as well as the CRT run time libraries.  If
-# CMAKE_INSTALL_OPENMP_LIBRARIES is set then the OpenMP run time libraries
-# are installed as well.  If
-# CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION is set then the libraries are
-# installed to that directory rather than the default.  If
-# CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS is NOT set, then this
-# file warns about required files that do not exist.  You can set this
-# variable to ON before including this file to avoid the warning.  For
-# example, the Visual Studio Express editions do not include the
-# redistributable files, so if you include this file on a machine with
-# only VS Express installed, you'll get the warning.
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-if(MSVC)
-  file(TO_CMAKE_PATH "$ENV{SYSTEMROOT}" SYSTEMROOT)
-
-  if(CMAKE_CL_64)
-    if(MSVC_VERSION GREATER 1599)
-      # VS 10 and later:
-      set(CMAKE_MSVC_ARCH x64)
-    else()
-      # VS 9 and earlier:
-      set(CMAKE_MSVC_ARCH amd64)
-    endif()
-  else()
-    set(CMAKE_MSVC_ARCH x86)
-  endif()
-
-  get_filename_component(devenv_dir "${CMAKE_MAKE_PROGRAM}" PATH)
-  get_filename_component(base_dir "${devenv_dir}/../.." ABSOLUTE)
-
-  if(MSVC70)
-    set(__install__libs
-      "${SYSTEMROOT}/system32/msvcp70.dll"
-      "${SYSTEMROOT}/system32/msvcr70.dll"
-      )
-  endif()
-
-  if(MSVC71)
-    set(__install__libs
-      "${SYSTEMROOT}/system32/msvcp71.dll"
-      "${SYSTEMROOT}/system32/msvcr71.dll"
-      )
-  endif()
-
-  if(MSVC80)
-    # Find the runtime library redistribution directory.
-    get_filename_component(msvc_install_dir
-      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\8.0;InstallDir]" ABSOLUTE)
-    find_path(MSVC80_REDIST_DIR NAMES ${CMAKE_MSVC_ARCH}/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest
-      PATHS
-        "${msvc_install_dir}/../../VC/redist"
-        "${base_dir}/VC/redist"
-      )
-    mark_as_advanced(MSVC80_REDIST_DIR)
-    set(MSVC80_CRT_DIR "${MSVC80_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC80.CRT")
-
-    # Install the manifest that allows DLLs to be loaded from the
-    # directory containing the executable.
-    if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
-      set(__install__libs
-        "${MSVC80_CRT_DIR}/Microsoft.VC80.CRT.manifest"
-        "${MSVC80_CRT_DIR}/msvcm80.dll"
-        "${MSVC80_CRT_DIR}/msvcp80.dll"
-        "${MSVC80_CRT_DIR}/msvcr80.dll"
-        )
-    else()
-      set(__install__libs)
-    endif()
-
-    if(CMAKE_INSTALL_DEBUG_LIBRARIES)
-      set(MSVC80_CRT_DIR
-        "${MSVC80_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC80.DebugCRT")
-      set(__install__libs ${__install__libs}
-        "${MSVC80_CRT_DIR}/Microsoft.VC80.DebugCRT.manifest"
-        "${MSVC80_CRT_DIR}/msvcm80d.dll"
-        "${MSVC80_CRT_DIR}/msvcp80d.dll"
-        "${MSVC80_CRT_DIR}/msvcr80d.dll"
-        )
-    endif()
-  endif()
-
-  if(MSVC90)
-    # Find the runtime library redistribution directory.
-    get_filename_component(msvc_install_dir
-      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\9.0;InstallDir]" ABSOLUTE)
-    get_filename_component(msvc_express_install_dir
-      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VCExpress\\9.0;InstallDir]" ABSOLUTE)
-    find_path(MSVC90_REDIST_DIR NAMES ${CMAKE_MSVC_ARCH}/Microsoft.VC90.CRT/Microsoft.VC90.CRT.manifest
-      PATHS
-        "${msvc_install_dir}/../../VC/redist"
-        "${msvc_express_install_dir}/../../VC/redist"
-        "${base_dir}/VC/redist"
-      )
-    mark_as_advanced(MSVC90_REDIST_DIR)
-    set(MSVC90_CRT_DIR "${MSVC90_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC90.CRT")
-
-    # Install the manifest that allows DLLs to be loaded from the
-    # directory containing the executable.
-    if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
-      set(__install__libs
-        "${MSVC90_CRT_DIR}/Microsoft.VC90.CRT.manifest"
-        "${MSVC90_CRT_DIR}/msvcm90.dll"
-        "${MSVC90_CRT_DIR}/msvcp90.dll"
-        "${MSVC90_CRT_DIR}/msvcr90.dll"
-        )
-    else()
-      set(__install__libs)
-    endif()
-
-    if(CMAKE_INSTALL_DEBUG_LIBRARIES)
-      set(MSVC90_CRT_DIR
-        "${MSVC90_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC90.DebugCRT")
-      set(__install__libs ${__install__libs}
-        "${MSVC90_CRT_DIR}/Microsoft.VC90.DebugCRT.manifest"
-        "${MSVC90_CRT_DIR}/msvcm90d.dll"
-        "${MSVC90_CRT_DIR}/msvcp90d.dll"
-        "${MSVC90_CRT_DIR}/msvcr90d.dll"
-        )
-    endif()
-  endif()
-
-  macro(MSVCRT_FILES_FOR_VERSION version)
-    set(v "${version}")
-
-    # Find the runtime library redistribution directory.
-    get_filename_component(msvc_install_dir
-      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\${v}.0;InstallDir]" ABSOLUTE)
-    find_path(MSVC${v}_REDIST_DIR NAMES ${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.CRT
-      PATHS
-        "${msvc_install_dir}/../../VC/redist"
-        "${base_dir}/VC/redist"
-        "$ENV{ProgramFiles}/Microsoft Visual Studio ${v}.0/VC/redist"
-        set(programfilesx86 "ProgramFiles(x86)")
-        "$ENV{${programfilesx86}}/Microsoft Visual Studio ${v}.0/VC/redist"
-      )
-    mark_as_advanced(MSVC${v}_REDIST_DIR)
-    set(MSVC${v}_CRT_DIR "${MSVC${v}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.CRT")
-
-    if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
-      set(__install__libs
-        "${MSVC${v}_CRT_DIR}/msvcp${v}0.dll"
-        )
-      if(NOT v VERSION_LESS 14)
-        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/vcruntime${v}0.dll")
-      else()
-        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/msvcr${v}0.dll")
-      endif()
-    else()
-      set(__install__libs)
-    endif()
-
-    if(CMAKE_INSTALL_DEBUG_LIBRARIES)
-      set(MSVC${v}_CRT_DIR
-        "${MSVC${v}_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.DebugCRT")
-      set(__install__libs ${__install__libs}
-        "${MSVC${v}_CRT_DIR}/msvcp${v}0d.dll"
-        )
-      if(NOT v VERSION_LESS 14)
-        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/vcruntime${v}0d.dll")
-      else()
-        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/msvcr${v}0d.dll")
-      endif()
-    endif()
-  endmacro()
-
-  if(MSVC10)
-    MSVCRT_FILES_FOR_VERSION(10)
-  endif()
-
-  if(MSVC11)
-    MSVCRT_FILES_FOR_VERSION(11)
-  endif()
-
-  if(MSVC12)
-    MSVCRT_FILES_FOR_VERSION(12)
-  endif()
-
-  if(MSVC14)
-    MSVCRT_FILES_FOR_VERSION(14)
-  endif()
-
-  if(CMAKE_INSTALL_MFC_LIBRARIES)
-    if(MSVC70)
-      set(__install__libs ${__install__libs}
-        "${SYSTEMROOT}/system32/mfc70.dll"
-        )
-    endif()
-
-    if(MSVC71)
-      set(__install__libs ${__install__libs}
-        "${SYSTEMROOT}/system32/mfc71.dll"
-        )
-    endif()
-
-    if(MSVC80)
-      if(CMAKE_INSTALL_DEBUG_LIBRARIES)
-        set(MSVC80_MFC_DIR
-          "${MSVC80_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC80.DebugMFC")
-        set(__install__libs ${__install__libs}
-          "${MSVC80_MFC_DIR}/Microsoft.VC80.DebugMFC.manifest"
-          "${MSVC80_MFC_DIR}/mfc80d.dll"
-          "${MSVC80_MFC_DIR}/mfc80ud.dll"
-          "${MSVC80_MFC_DIR}/mfcm80d.dll"
-          "${MSVC80_MFC_DIR}/mfcm80ud.dll"
-          )
-      endif()
-
-      set(MSVC80_MFC_DIR "${MSVC80_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC80.MFC")
-      # Install the manifest that allows DLLs to be loaded from the
-      # directory containing the executable.
-      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
-        set(__install__libs ${__install__libs}
-          "${MSVC80_MFC_DIR}/Microsoft.VC80.MFC.manifest"
-          "${MSVC80_MFC_DIR}/mfc80.dll"
-          "${MSVC80_MFC_DIR}/mfc80u.dll"
-          "${MSVC80_MFC_DIR}/mfcm80.dll"
-          "${MSVC80_MFC_DIR}/mfcm80u.dll"
-          )
-      endif()
-
-      # include the language dll's for vs8 as well as the actuall dll's
-      set(MSVC80_MFCLOC_DIR "${MSVC80_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC80.MFCLOC")
-      # Install the manifest that allows DLLs to be loaded from the
-      # directory containing the executable.
-      set(__install__libs ${__install__libs}
-        "${MSVC80_MFCLOC_DIR}/Microsoft.VC80.MFCLOC.manifest"
-        "${MSVC80_MFCLOC_DIR}/mfc80chs.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80cht.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80enu.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80esp.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80deu.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80fra.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80ita.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80jpn.dll"
-        "${MSVC80_MFCLOC_DIR}/mfc80kor.dll"
-        )
-    endif()
-
-    if(MSVC90)
-      if(CMAKE_INSTALL_DEBUG_LIBRARIES)
-        set(MSVC90_MFC_DIR
-          "${MSVC90_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC90.DebugMFC")
-        set(__install__libs ${__install__libs}
-          "${MSVC90_MFC_DIR}/Microsoft.VC90.DebugMFC.manifest"
-          "${MSVC90_MFC_DIR}/mfc90d.dll"
-          "${MSVC90_MFC_DIR}/mfc90ud.dll"
-          "${MSVC90_MFC_DIR}/mfcm90d.dll"
-          "${MSVC90_MFC_DIR}/mfcm90ud.dll"
-          )
-      endif()
-
-      set(MSVC90_MFC_DIR "${MSVC90_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC90.MFC")
-      # Install the manifest that allows DLLs to be loaded from the
-      # directory containing the executable.
-      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
-        set(__install__libs ${__install__libs}
-          "${MSVC90_MFC_DIR}/Microsoft.VC90.MFC.manifest"
-          "${MSVC90_MFC_DIR}/mfc90.dll"
-          "${MSVC90_MFC_DIR}/mfc90u.dll"
-          "${MSVC90_MFC_DIR}/mfcm90.dll"
-          "${MSVC90_MFC_DIR}/mfcm90u.dll"
-          )
-      endif()
-
-      # include the language dll's for vs9 as well as the actuall dll's
-      set(MSVC90_MFCLOC_DIR "${MSVC90_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC90.MFCLOC")
-      # Install the manifest that allows DLLs to be loaded from the
-      # directory containing the executable.
-      set(__install__libs ${__install__libs}
-        "${MSVC90_MFCLOC_DIR}/Microsoft.VC90.MFCLOC.manifest"
-        "${MSVC90_MFCLOC_DIR}/mfc90chs.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90cht.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90enu.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90esp.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90deu.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90fra.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90ita.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90jpn.dll"
-        "${MSVC90_MFCLOC_DIR}/mfc90kor.dll"
-        )
-    endif()
-
-    macro(MFC_FILES_FOR_VERSION version)
-      set(v "${version}")
-
-      # Multi-Byte Character Set versions of MFC are available as optional
-      # addon since Visual Studio 12.  So for version 12 or higher, check
-      # whether they are available and exclude them if they are not.
-      if("${v}" LESS 12 OR EXISTS "${MSVC${v}_MFC_DIR}/mfc${v}0d.dll")
-        set(mbcs ON)
-      else()
-        set(mbcs OFF)
-      endif()
-
-      if(CMAKE_INSTALL_DEBUG_LIBRARIES)
-        set(MSVC${v}_MFC_DIR
-          "${MSVC${v}_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.DebugMFC")
-        set(__install__libs ${__install__libs}
-          "${MSVC${v}_MFC_DIR}/mfc${v}0ud.dll"
-          "${MSVC${v}_MFC_DIR}/mfcm${v}0ud.dll"
-          )
-        if(mbcs)
-          set(__install__libs ${__install__libs}
-            "${MSVC${v}_MFC_DIR}/mfc${v}0d.dll"
-            "${MSVC${v}_MFC_DIR}/mfcm${v}0d.dll"
-          )
-        endif()
-      endif()
-
-      set(MSVC${v}_MFC_DIR "${MSVC${v}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.MFC")
-      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
-        set(__install__libs ${__install__libs}
-          "${MSVC${v}_MFC_DIR}/mfc${v}0u.dll"
-          "${MSVC${v}_MFC_DIR}/mfcm${v}0u.dll"
-          )
-        if(mbcs)
-          set(__install__libs ${__install__libs}
-            "${MSVC${v}_MFC_DIR}/mfc${v}0.dll"
-            "${MSVC${v}_MFC_DIR}/mfcm${v}0.dll"
-          )
-        endif()
-      endif()
-
-      # include the language dll's as well as the actuall dll's
-      set(MSVC${v}_MFCLOC_DIR "${MSVC${v}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.MFCLOC")
-      set(__install__libs ${__install__libs}
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0chs.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0cht.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0deu.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0enu.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0esn.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0fra.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0ita.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0jpn.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0kor.dll"
-        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0rus.dll"
-        )
-    endmacro()
-
-    if(MSVC10)
-      MFC_FILES_FOR_VERSION(10)
-    endif()
-
-    if(MSVC11)
-      MFC_FILES_FOR_VERSION(11)
-    endif()
-
-    if(MSVC12)
-      MFC_FILES_FOR_VERSION(12)
-    endif()
-
-    if(MSVC14)
-      MFC_FILES_FOR_VERSION(14)
-    endif()
-  endif()
-
-  # MSVC 8 was the first version with OpenMP
-  # Furthermore, there is no debug version of this
-  if(CMAKE_INSTALL_OPENMP_LIBRARIES)
-    macro(OPENMP_FILES_FOR_VERSION version_a version_b)
-      set(va "${version_a}")
-      set(vb "${version_b}")
-      set(MSVC${va}_OPENMP_DIR "${MSVC${va}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${vb}.OPENMP")
-
-      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
-        set(__install__libs ${__install__libs}
-          "${MSVC${va}_OPENMP_DIR}/vcomp${vb}.dll")
-      endif()
-    endmacro()
-
-    if(MSVC80)
-      OPENMP_FILES_FOR_VERSION(80 80)
-    endif()
-    if(MSVC90)
-      OPENMP_FILES_FOR_VERSION(90 90)
-    endif()
-    if(MSVC10)
-      OPENMP_FILES_FOR_VERSION(10 100)
-    endif()
-    if(MSVC11)
-      OPENMP_FILES_FOR_VERSION(11 110)
-    endif()
-    if(MSVC12)
-      OPENMP_FILES_FOR_VERSION(12 120)
-    endif()
-    if(MSVC14)
-      OPENMP_FILES_FOR_VERSION(14 140)
-    endif()
-  endif()
-
-  foreach(lib
-      ${__install__libs}
-      )
-    if(EXISTS ${lib})
-      set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS
-        ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS} ${lib})
-    else()
-      if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS)
-        message(WARNING "system runtime library file does not exist: '${lib}'")
-        # This warning indicates an incomplete Visual Studio installation
-        # or a bug somewhere above here in this file.
-        # If you would like to avoid this warning, fix the real problem, or
-        # set CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS before including
-        # this file.
-      endif()
-    endif()
-  endforeach()
-endif()
-
-if(WATCOM)
-  get_filename_component( CompilerPath ${CMAKE_C_COMPILER} PATH )
-  if(CMAKE_C_COMPILER_VERSION)
-    set(_compiler_version ${CMAKE_C_COMPILER_VERSION})
-  else()
-    set(_compiler_version ${CMAKE_CXX_COMPILER_VERSION})
-  endif()
-  string(REGEX MATCHALL "[0-9]+" _watcom_version_list "${_compiler_version}")
-  list(GET _watcom_version_list 0 _watcom_major)
-  list(GET _watcom_version_list 1 _watcom_minor)
-  set( __install__libs
-    ${CompilerPath}/clbr${_watcom_major}${_watcom_minor}.dll
-    ${CompilerPath}/mt7r${_watcom_major}${_watcom_minor}.dll
-    ${CompilerPath}/plbr${_watcom_major}${_watcom_minor}.dll )
-  foreach(lib
-      ${__install__libs}
-      )
-    if(EXISTS ${lib})
-      set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS
-        ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS} ${lib})
-    else()
-      if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS)
-        message(WARNING "system runtime library file does not exist: '${lib}'")
-        # This warning indicates an incomplete Watcom installation
-        # or a bug somewhere above here in this file.
-        # If you would like to avoid this warning, fix the real problem, or
-        # set CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS before including
-        # this file.
-      endif()
-    endif()
-  endforeach()
-endif()
-
-
-# Include system runtime libraries in the installation if any are
-# specified by CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS.
-if(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS)
-  if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP)
-    if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION)
-      if(WIN32)
-        set(CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION bin)
-      else()
-        set(CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION lib)
-      endif()
-    endif()
-    install(PROGRAMS ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS}
-      DESTINATION ${CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION})
-  endif()
-endif()
diff --git a/share/cmake-3.2/Modules/Internal/FeatureTesting.cmake b/share/cmake-3.2/Modules/Internal/FeatureTesting.cmake
deleted file mode 100644
index abd9a26..0000000
--- a/share/cmake-3.2/Modules/Internal/FeatureTesting.cmake
+++ /dev/null
@@ -1,60 +0,0 @@
-
-macro(record_compiler_features lang compile_flags feature_list)
-  include("${CMAKE_ROOT}/Modules/Compiler/${CMAKE_${lang}_COMPILER_ID}-${lang}-FeatureTests.cmake" OPTIONAL)
-
-  string(TOLOWER ${lang} lang_lc)
-  file(REMOVE "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin")
-  file(WRITE "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}" "
-  const char features[] = {\"\"\n")
-
-  get_property(known_features GLOBAL PROPERTY CMAKE_${lang}_KNOWN_FEATURES)
-
-  foreach(feature ${known_features})
-    if (_cmake_feature_test_${feature})
-      if (${_cmake_feature_test_${feature}} STREQUAL 1)
-        set(_feature_condition "\"1\" ")
-      else()
-        set(_feature_condition "#if ${_cmake_feature_test_${feature}}\n\"1\"\n#else\n\"0\"\n#endif\n")
-      endif()
-      file(APPEND "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}" "\"${lang}_FEATURE:\"\n${_feature_condition}\"${feature}\\n\"\n")
-    endif()
-  endforeach()
-  file(APPEND "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}"
-    "\n};\n\nint main(int argc, char** argv) { (void)argv; return features[argc]; }\n")
-
-  try_compile(CMAKE_${lang}_FEATURE_TEST
-    ${CMAKE_BINARY_DIR} "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}"
-    COMPILE_DEFINITIONS "${compile_flags}"
-    OUTPUT_VARIABLE _output
-    COPY_FILE "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin"
-    COPY_FILE_ERROR _copy_error
-    )
-  if(CMAKE_${lang}_FEATURE_TEST AND NOT _copy_error)
-    set(_result 0)
-  else()
-    set(_result 255)
-  endif()
-  unset(CMAKE_${lang}_FEATURE_TEST CACHE)
-
-  if (_result EQUAL 0)
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-      "\n\nDetecting ${lang} [${compile_flags}] compiler features compiled with the following output:\n${_output}\n\n")
-    if(EXISTS "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin")
-      file(STRINGS "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin"
-        features REGEX "${lang}_FEATURE:.*")
-      foreach(info ${features})
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-          "    Feature record: ${info}\n")
-        string(REPLACE "${lang}_FEATURE:" "" info ${info})
-        string(SUBSTRING ${info} 0 1 has_feature)
-        if(has_feature)
-          string(REGEX REPLACE "^1" "" feature ${info})
-          list(APPEND ${feature_list} ${feature})
-        endif()
-      endforeach()
-    endif()
-  else()
-    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-      "Detecting ${lang} [${compile_flags}] compiler features failed to compile with the following output:\n${_output}\n${_copy_error}\n\n")
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/MacOSXBundleInfo.plist.in b/share/cmake-3.2/Modules/MacOSXBundleInfo.plist.in
deleted file mode 100644
index a466dc7..0000000
--- a/share/cmake-3.2/Modules/MacOSXBundleInfo.plist.in
+++ /dev/null
@@ -1,36 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-<dict>
-	<key>CFBundleDevelopmentRegion</key>
-	<string>English</string>
-	<key>CFBundleExecutable</key>
-	<string>${MACOSX_BUNDLE_EXECUTABLE_NAME}</string>
-	<key>CFBundleGetInfoString</key>
-	<string>${MACOSX_BUNDLE_INFO_STRING}</string>
-	<key>CFBundleIconFile</key>
-	<string>${MACOSX_BUNDLE_ICON_FILE}</string>
-	<key>CFBundleIdentifier</key>
-	<string>${MACOSX_BUNDLE_GUI_IDENTIFIER}</string>
-	<key>CFBundleInfoDictionaryVersion</key>
-	<string>6.0</string>
-	<key>CFBundleLongVersionString</key>
-	<string>${MACOSX_BUNDLE_LONG_VERSION_STRING}</string>
-	<key>CFBundleName</key>
-	<string>${MACOSX_BUNDLE_BUNDLE_NAME}</string>
-	<key>CFBundlePackageType</key>
-	<string>APPL</string>
-	<key>CFBundleShortVersionString</key>
-	<string>${MACOSX_BUNDLE_SHORT_VERSION_STRING}</string>
-	<key>CFBundleSignature</key>
-	<string>????</string>
-	<key>CFBundleVersion</key>
-	<string>${MACOSX_BUNDLE_BUNDLE_VERSION}</string>
-	<key>CSResourcesFileMapped</key>
-	<true/>
-	<key>LSRequiresCarbon</key>
-	<true/>
-	<key>NSHumanReadableCopyright</key>
-	<string>${MACOSX_BUNDLE_COPYRIGHT}</string>
-</dict>
-</plist>
diff --git a/share/cmake-3.2/Modules/NSIS.template.in b/share/cmake-3.2/Modules/NSIS.template.in
deleted file mode 100644
index 76310af..0000000
--- a/share/cmake-3.2/Modules/NSIS.template.in
+++ /dev/null
@@ -1,977 +0,0 @@
-; CPack install script designed for a nmake build
-
-;--------------------------------
-; You must define these values
-
-  !define VERSION "@CPACK_PACKAGE_VERSION@"
-  !define PATCH  "@CPACK_PACKAGE_VERSION_PATCH@"
-  !define INST_DIR "@CPACK_TEMPORARY_DIRECTORY@"
-
-;--------------------------------
-;Variables
-
-  Var MUI_TEMP
-  Var STARTMENU_FOLDER
-  Var SV_ALLUSERS
-  Var START_MENU
-  Var DO_NOT_ADD_TO_PATH
-  Var ADD_TO_PATH_ALL_USERS
-  Var ADD_TO_PATH_CURRENT_USER
-  Var INSTALL_DESKTOP
-  Var IS_DEFAULT_INSTALLDIR
-;--------------------------------
-;Include Modern UI
-
-  !include "MUI.nsh"
-
-  ;Default installation folder
-  InstallDir "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
-
-;--------------------------------
-;General
-
-  ;Name and file
-  Name "@CPACK_NSIS_PACKAGE_NAME@"
-  OutFile "@CPACK_TOPLEVEL_DIRECTORY@/@CPACK_OUTPUT_FILE_NAME@"
-
-  ;Set compression
-  SetCompressor @CPACK_NSIS_COMPRESSOR@
-
-  ;Require administrator access
-  RequestExecutionLevel admin
-
-@CPACK_NSIS_DEFINES@
-
-  !include Sections.nsh
-
-;--- Component support macros: ---
-; The code for the add/remove functionality is from:
-;   http://nsis.sourceforge.net/Add/Remove_Functionality
-; It has been modified slightly and extended to provide
-; inter-component dependencies.
-Var AR_SecFlags
-Var AR_RegFlags
-@CPACK_NSIS_SECTION_SELECTED_VARS@
-
-; Loads the "selected" flag for the section named SecName into the
-; variable VarName.
-!macro LoadSectionSelectedIntoVar SecName VarName
- SectionGetFlags ${${SecName}} $${VarName}
- IntOp $${VarName} $${VarName} & ${SF_SELECTED}  ;Turn off all other bits
-!macroend
-
-; Loads the value of a variable... can we get around this?
-!macro LoadVar VarName
-  IntOp $R0 0 + $${VarName}
-!macroend
-
-; Sets the value of a variable
-!macro StoreVar VarName IntValue
-  IntOp $${VarName} 0 + ${IntValue}
-!macroend
-
-!macro InitSection SecName
-  ;  This macro reads component installed flag from the registry and
-  ;changes checked state of the section on the components page.
-  ;Input: section index constant name specified in Section command.
-
-  ClearErrors
-  ;Reading component status from registry
-  ReadRegDWORD $AR_RegFlags HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" "Installed"
-  IfErrors "default_${SecName}"
-    ;Status will stay default if registry value not found
-    ;(component was never installed)
-  IntOp $AR_RegFlags $AR_RegFlags & ${SF_SELECTED} ;Turn off all other bits
-  SectionGetFlags ${${SecName}} $AR_SecFlags  ;Reading default section flags
-  IntOp $AR_SecFlags $AR_SecFlags & 0xFFFE  ;Turn lowest (enabled) bit off
-  IntOp $AR_SecFlags $AR_RegFlags | $AR_SecFlags      ;Change lowest bit
-
-  ; Note whether this component was installed before
-  !insertmacro StoreVar ${SecName}_was_installed $AR_RegFlags
-  IntOp $R0 $AR_RegFlags & $AR_RegFlags
-
-  ;Writing modified flags
-  SectionSetFlags ${${SecName}} $AR_SecFlags
-
- "default_${SecName}:"
- !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
-!macroend
-
-!macro FinishSection SecName
-  ;  This macro reads section flag set by user and removes the section
-  ;if it is not selected.
-  ;Then it writes component installed flag to registry
-  ;Input: section index constant name specified in Section command.
-
-  SectionGetFlags ${${SecName}} $AR_SecFlags  ;Reading section flags
-  ;Checking lowest bit:
-  IntOp $AR_SecFlags $AR_SecFlags & ${SF_SELECTED}
-  IntCmp $AR_SecFlags 1 "leave_${SecName}"
-    ;Section is not selected:
-    ;Calling Section uninstall macro and writing zero installed flag
-    !insertmacro "Remove_${${SecName}}"
-    WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \
-  "Installed" 0
-    Goto "exit_${SecName}"
-
- "leave_${SecName}:"
-    ;Section is selected:
-    WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \
-  "Installed" 1
-
- "exit_${SecName}:"
-!macroend
-
-!macro RemoveSection_CPack SecName
-  ;  This macro is used to call section's Remove_... macro
-  ;from the uninstaller.
-  ;Input: section index constant name specified in Section command.
-
-  !insertmacro "Remove_${${SecName}}"
-!macroend
-
-; Determine whether the selection of SecName changed
-!macro MaybeSelectionChanged SecName
-  !insertmacro LoadVar ${SecName}_selected
-  SectionGetFlags ${${SecName}} $R1
-  IntOp $R1 $R1 & ${SF_SELECTED} ;Turn off all other bits
-
-  ; See if the status has changed:
-  IntCmp $R0 $R1 "${SecName}_unchanged"
-  !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
-
-  IntCmp $R1 ${SF_SELECTED} "${SecName}_was_selected"
-  !insertmacro "Deselect_required_by_${SecName}"
-  goto "${SecName}_unchanged"
-
-  "${SecName}_was_selected:"
-  !insertmacro "Select_${SecName}_depends"
-
-  "${SecName}_unchanged:"
-!macroend
-;--- End of Add/Remove macros ---
-
-;--------------------------------
-;Interface Settings
-
-  !define MUI_HEADERIMAGE
-  !define MUI_ABORTWARNING
-
-;--------------------------------
-; path functions
-
-!verbose 3
-!include "WinMessages.NSH"
-!verbose 4
-
-;----------------------------------------
-; based upon a script of "Written by KiCHiK 2003-01-18 05:57:02"
-;----------------------------------------
-!verbose 3
-!include "WinMessages.NSH"
-!verbose 4
-;====================================================
-; get_NT_environment
-;     Returns: the selected environment
-;     Output : head of the stack
-;====================================================
-!macro select_NT_profile UN
-Function ${UN}select_NT_profile
-   StrCmp $ADD_TO_PATH_ALL_USERS "1" 0 environment_single
-      DetailPrint "Selected environment for all users"
-      Push "all"
-      Return
-   environment_single:
-      DetailPrint "Selected environment for current user only."
-      Push "current"
-      Return
-FunctionEnd
-!macroend
-!insertmacro select_NT_profile ""
-!insertmacro select_NT_profile "un."
-;----------------------------------------------------
-!define NT_current_env 'HKCU "Environment"'
-!define NT_all_env     'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"'
-
-!ifndef WriteEnvStr_RegKey
-  !ifdef ALL_USERS
-    !define WriteEnvStr_RegKey \
-       'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"'
-  !else
-    !define WriteEnvStr_RegKey 'HKCU "Environment"'
-  !endif
-!endif
-
-; AddToPath - Adds the given dir to the search path.
-;        Input - head of the stack
-;        Note - Win9x systems requires reboot
-
-Function AddToPath
-  Exch $0
-  Push $1
-  Push $2
-  Push $3
-
-  # don't add if the path doesn't exist
-  IfFileExists "$0\*.*" "" AddToPath_done
-
-  ReadEnvStr $1 PATH
-  ; if the path is too long for a NSIS variable NSIS will return a 0
-  ; length string.  If we find that, then warn and skip any path
-  ; modification as it will trash the existing path.
-  StrLen $2 $1
-  IntCmp $2 0 CheckPathLength_ShowPathWarning CheckPathLength_Done CheckPathLength_Done
-    CheckPathLength_ShowPathWarning:
-    Messagebox MB_OK|MB_ICONEXCLAMATION "Warning! PATH too long installer unable to modify PATH!"
-    Goto AddToPath_done
-  CheckPathLength_Done:
-  Push "$1;"
-  Push "$0;"
-  Call StrStr
-  Pop $2
-  StrCmp $2 "" "" AddToPath_done
-  Push "$1;"
-  Push "$0\;"
-  Call StrStr
-  Pop $2
-  StrCmp $2 "" "" AddToPath_done
-  GetFullPathName /SHORT $3 $0
-  Push "$1;"
-  Push "$3;"
-  Call StrStr
-  Pop $2
-  StrCmp $2 "" "" AddToPath_done
-  Push "$1;"
-  Push "$3\;"
-  Call StrStr
-  Pop $2
-  StrCmp $2 "" "" AddToPath_done
-
-  Call IsNT
-  Pop $1
-  StrCmp $1 1 AddToPath_NT
-    ; Not on NT
-    StrCpy $1 $WINDIR 2
-    FileOpen $1 "$1\autoexec.bat" a
-    FileSeek $1 -1 END
-    FileReadByte $1 $2
-    IntCmp $2 26 0 +2 +2 # DOS EOF
-      FileSeek $1 -1 END # write over EOF
-    FileWrite $1 "$\r$\nSET PATH=%PATH%;$3$\r$\n"
-    FileClose $1
-    SetRebootFlag true
-    Goto AddToPath_done
-
-  AddToPath_NT:
-    StrCmp $ADD_TO_PATH_ALL_USERS "1" ReadAllKey
-      ReadRegStr $1 ${NT_current_env} "PATH"
-      Goto DoTrim
-    ReadAllKey:
-      ReadRegStr $1 ${NT_all_env} "PATH"
-    DoTrim:
-    StrCmp $1 "" AddToPath_NTdoIt
-      Push $1
-      Call Trim
-      Pop $1
-      StrCpy $0 "$1;$0"
-    AddToPath_NTdoIt:
-      StrCmp $ADD_TO_PATH_ALL_USERS "1" WriteAllKey
-        WriteRegExpandStr ${NT_current_env} "PATH" $0
-        Goto DoSend
-      WriteAllKey:
-        WriteRegExpandStr ${NT_all_env} "PATH" $0
-      DoSend:
-      SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
-
-  AddToPath_done:
-    Pop $3
-    Pop $2
-    Pop $1
-    Pop $0
-FunctionEnd
-
-
-; RemoveFromPath - Remove a given dir from the path
-;     Input: head of the stack
-
-Function un.RemoveFromPath
-  Exch $0
-  Push $1
-  Push $2
-  Push $3
-  Push $4
-  Push $5
-  Push $6
-
-  IntFmt $6 "%c" 26 # DOS EOF
-
-  Call un.IsNT
-  Pop $1
-  StrCmp $1 1 unRemoveFromPath_NT
-    ; Not on NT
-    StrCpy $1 $WINDIR 2
-    FileOpen $1 "$1\autoexec.bat" r
-    GetTempFileName $4
-    FileOpen $2 $4 w
-    GetFullPathName /SHORT $0 $0
-    StrCpy $0 "SET PATH=%PATH%;$0"
-    Goto unRemoveFromPath_dosLoop
-
-    unRemoveFromPath_dosLoop:
-      FileRead $1 $3
-      StrCpy $5 $3 1 -1 # read last char
-      StrCmp $5 $6 0 +2 # if DOS EOF
-        StrCpy $3 $3 -1 # remove DOS EOF so we can compare
-      StrCmp $3 "$0$\r$\n" unRemoveFromPath_dosLoopRemoveLine
-      StrCmp $3 "$0$\n" unRemoveFromPath_dosLoopRemoveLine
-      StrCmp $3 "$0" unRemoveFromPath_dosLoopRemoveLine
-      StrCmp $3 "" unRemoveFromPath_dosLoopEnd
-      FileWrite $2 $3
-      Goto unRemoveFromPath_dosLoop
-      unRemoveFromPath_dosLoopRemoveLine:
-        SetRebootFlag true
-        Goto unRemoveFromPath_dosLoop
-
-    unRemoveFromPath_dosLoopEnd:
-      FileClose $2
-      FileClose $1
-      StrCpy $1 $WINDIR 2
-      Delete "$1\autoexec.bat"
-      CopyFiles /SILENT $4 "$1\autoexec.bat"
-      Delete $4
-      Goto unRemoveFromPath_done
-
-  unRemoveFromPath_NT:
-    StrCmp $ADD_TO_PATH_ALL_USERS "1" unReadAllKey
-      ReadRegStr $1 ${NT_current_env} "PATH"
-      Goto unDoTrim
-    unReadAllKey:
-      ReadRegStr $1 ${NT_all_env} "PATH"
-    unDoTrim:
-    StrCpy $5 $1 1 -1 # copy last char
-    StrCmp $5 ";" +2 # if last char != ;
-      StrCpy $1 "$1;" # append ;
-    Push $1
-    Push "$0;"
-    Call un.StrStr ; Find `$0;` in $1
-    Pop $2 ; pos of our dir
-    StrCmp $2 "" unRemoveFromPath_done
-      ; else, it is in path
-      # $0 - path to add
-      # $1 - path var
-      StrLen $3 "$0;"
-      StrLen $4 $2
-      StrCpy $5 $1 -$4 # $5 is now the part before the path to remove
-      StrCpy $6 $2 "" $3 # $6 is now the part after the path to remove
-      StrCpy $3 $5$6
-
-      StrCpy $5 $3 1 -1 # copy last char
-      StrCmp $5 ";" 0 +2 # if last char == ;
-        StrCpy $3 $3 -1 # remove last char
-
-      StrCmp $ADD_TO_PATH_ALL_USERS "1" unWriteAllKey
-        WriteRegExpandStr ${NT_current_env} "PATH" $3
-        Goto unDoSend
-      unWriteAllKey:
-        WriteRegExpandStr ${NT_all_env} "PATH" $3
-      unDoSend:
-      SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
-
-  unRemoveFromPath_done:
-    Pop $6
-    Pop $5
-    Pop $4
-    Pop $3
-    Pop $2
-    Pop $1
-    Pop $0
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Uninstall sutff
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-###########################################
-#            Utility Functions            #
-###########################################
-
-;====================================================
-; IsNT - Returns 1 if the current system is NT, 0
-;        otherwise.
-;     Output: head of the stack
-;====================================================
-; IsNT
-; no input
-; output, top of the stack = 1 if NT or 0 if not
-;
-; Usage:
-;   Call IsNT
-;   Pop $R0
-;  ($R0 at this point is 1 or 0)
-
-!macro IsNT un
-Function ${un}IsNT
-  Push $0
-  ReadRegStr $0 HKLM "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
-  StrCmp $0 "" 0 IsNT_yes
-  ; we are not NT.
-  Pop $0
-  Push 0
-  Return
-
-  IsNT_yes:
-    ; NT!!!
-    Pop $0
-    Push 1
-FunctionEnd
-!macroend
-!insertmacro IsNT ""
-!insertmacro IsNT "un."
-
-; StrStr
-; input, top of stack = string to search for
-;        top of stack-1 = string to search in
-; output, top of stack (replaces with the portion of the string remaining)
-; modifies no other variables.
-;
-; Usage:
-;   Push "this is a long ass string"
-;   Push "ass"
-;   Call StrStr
-;   Pop $R0
-;  ($R0 at this point is "ass string")
-
-!macro StrStr un
-Function ${un}StrStr
-Exch $R1 ; st=haystack,old$R1, $R1=needle
-  Exch    ; st=old$R1,haystack
-  Exch $R2 ; st=old$R1,old$R2, $R2=haystack
-  Push $R3
-  Push $R4
-  Push $R5
-  StrLen $R3 $R1
-  StrCpy $R4 0
-  ; $R1=needle
-  ; $R2=haystack
-  ; $R3=len(needle)
-  ; $R4=cnt
-  ; $R5=tmp
-  loop:
-    StrCpy $R5 $R2 $R3 $R4
-    StrCmp $R5 $R1 done
-    StrCmp $R5 "" done
-    IntOp $R4 $R4 + 1
-    Goto loop
-done:
-  StrCpy $R1 $R2 "" $R4
-  Pop $R5
-  Pop $R4
-  Pop $R3
-  Pop $R2
-  Exch $R1
-FunctionEnd
-!macroend
-!insertmacro StrStr ""
-!insertmacro StrStr "un."
-
-Function Trim ; Added by Pelaca
-	Exch $R1
-	Push $R2
-Loop:
-	StrCpy $R2 "$R1" 1 -1
-	StrCmp "$R2" " " RTrim
-	StrCmp "$R2" "$\n" RTrim
-	StrCmp "$R2" "$\r" RTrim
-	StrCmp "$R2" ";" RTrim
-	GoTo Done
-RTrim:
-	StrCpy $R1 "$R1" -1
-	Goto Loop
-Done:
-	Pop $R2
-	Exch $R1
-FunctionEnd
-
-Function ConditionalAddToRegisty
-  Pop $0
-  Pop $1
-  StrCmp "$0" "" ConditionalAddToRegisty_EmptyString
-    WriteRegStr SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" \
-    "$1" "$0"
-    ;MessageBox MB_OK "Set Registry: '$1' to '$0'"
-    DetailPrint "Set install registry entry: '$1' to '$0'"
-  ConditionalAddToRegisty_EmptyString:
-FunctionEnd
-
-;--------------------------------
-
-!ifdef CPACK_USES_DOWNLOAD
-Function DownloadFile
-    IfFileExists $INSTDIR\* +2
-    CreateDirectory $INSTDIR
-    Pop $0
-
-    ; Skip if already downloaded
-    IfFileExists $INSTDIR\$0 0 +2
-    Return
-
-    StrCpy $1 "@CPACK_DOWNLOAD_SITE@"
-
-  try_again:
-    NSISdl::download "$1/$0" "$INSTDIR\$0"
-
-    Pop $1
-    StrCmp $1 "success" success
-    StrCmp $1 "Cancelled" cancel
-    MessageBox MB_OK "Download failed: $1"
-  cancel:
-    Return
-  success:
-FunctionEnd
-!endif
-
-;--------------------------------
-; Installation types
-@CPACK_NSIS_INSTALLATION_TYPES@
-
-;--------------------------------
-; Component sections
-@CPACK_NSIS_COMPONENT_SECTIONS@
-
-;--------------------------------
-; Define some macro setting for the gui
-@CPACK_NSIS_INSTALLER_MUI_ICON_CODE@
-@CPACK_NSIS_INSTALLER_ICON_CODE@
-@CPACK_NSIS_INSTALLER_MUI_COMPONENTS_DESC@
-@CPACK_NSIS_INSTALLER_MUI_FINISHPAGE_RUN_CODE@
-
-;--------------------------------
-;Pages
-  !insertmacro MUI_PAGE_WELCOME
-
-  !insertmacro MUI_PAGE_LICENSE "@CPACK_RESOURCE_FILE_LICENSE@"
-  Page custom InstallOptionsPage
-  !insertmacro MUI_PAGE_DIRECTORY
-
-  ;Start Menu Folder Page Configuration
-  !define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX"
-  !define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
-  !define MUI_STARTMENUPAGE_REGISTRY_VALUENAME "Start Menu Folder"
-  !insertmacro MUI_PAGE_STARTMENU Application $STARTMENU_FOLDER
-
-  @CPACK_NSIS_PAGE_COMPONENTS@
-
-  !insertmacro MUI_PAGE_INSTFILES
-  !insertmacro MUI_PAGE_FINISH
-
-  !insertmacro MUI_UNPAGE_CONFIRM
-  !insertmacro MUI_UNPAGE_INSTFILES
-
-;--------------------------------
-;Languages
-
-  !insertmacro MUI_LANGUAGE "English" ;first language is the default language
-  !insertmacro MUI_LANGUAGE "Albanian"
-  !insertmacro MUI_LANGUAGE "Arabic"
-  !insertmacro MUI_LANGUAGE "Basque"
-  !insertmacro MUI_LANGUAGE "Belarusian"
-  !insertmacro MUI_LANGUAGE "Bosnian"
-  !insertmacro MUI_LANGUAGE "Breton"
-  !insertmacro MUI_LANGUAGE "Bulgarian"
-  !insertmacro MUI_LANGUAGE "Croatian"
-  !insertmacro MUI_LANGUAGE "Czech"
-  !insertmacro MUI_LANGUAGE "Danish"
-  !insertmacro MUI_LANGUAGE "Dutch"
-  !insertmacro MUI_LANGUAGE "Estonian"
-  !insertmacro MUI_LANGUAGE "Farsi"
-  !insertmacro MUI_LANGUAGE "Finnish"
-  !insertmacro MUI_LANGUAGE "French"
-  !insertmacro MUI_LANGUAGE "German"
-  !insertmacro MUI_LANGUAGE "Greek"
-  !insertmacro MUI_LANGUAGE "Hebrew"
-  !insertmacro MUI_LANGUAGE "Hungarian"
-  !insertmacro MUI_LANGUAGE "Icelandic"
-  !insertmacro MUI_LANGUAGE "Indonesian"
-  !insertmacro MUI_LANGUAGE "Irish"
-  !insertmacro MUI_LANGUAGE "Italian"
-  !insertmacro MUI_LANGUAGE "Japanese"
-  !insertmacro MUI_LANGUAGE "Korean"
-  !insertmacro MUI_LANGUAGE "Kurdish"
-  !insertmacro MUI_LANGUAGE "Latvian"
-  !insertmacro MUI_LANGUAGE "Lithuanian"
-  !insertmacro MUI_LANGUAGE "Luxembourgish"
-  !insertmacro MUI_LANGUAGE "Macedonian"
-  !insertmacro MUI_LANGUAGE "Malay"
-  !insertmacro MUI_LANGUAGE "Mongolian"
-  !insertmacro MUI_LANGUAGE "Norwegian"
-  !insertmacro MUI_LANGUAGE "Polish"
-  !insertmacro MUI_LANGUAGE "Portuguese"
-  !insertmacro MUI_LANGUAGE "PortugueseBR"
-  !insertmacro MUI_LANGUAGE "Romanian"
-  !insertmacro MUI_LANGUAGE "Russian"
-  !insertmacro MUI_LANGUAGE "Serbian"
-  !insertmacro MUI_LANGUAGE "SerbianLatin"
-  !insertmacro MUI_LANGUAGE "SimpChinese"
-  !insertmacro MUI_LANGUAGE "Slovak"
-  !insertmacro MUI_LANGUAGE "Slovenian"
-  !insertmacro MUI_LANGUAGE "Spanish"
-  !insertmacro MUI_LANGUAGE "Swedish"
-  !insertmacro MUI_LANGUAGE "Thai"
-  !insertmacro MUI_LANGUAGE "TradChinese"
-  !insertmacro MUI_LANGUAGE "Turkish"
-  !insertmacro MUI_LANGUAGE "Ukrainian"
-  !insertmacro MUI_LANGUAGE "Welsh"
-
-
-;--------------------------------
-;Reserve Files
-
-  ;These files should be inserted before other files in the data block
-  ;Keep these lines before any File command
-  ;Only for solid compression (by default, solid compression is enabled for BZIP2 and LZMA)
-
-  ReserveFile "NSIS.InstallOptions.ini"
-  !insertmacro MUI_RESERVEFILE_INSTALLOPTIONS
-
-;--------------------------------
-;Installer Sections
-
-Section "-Core installation"
-  ;Use the entire tree produced by the INSTALL target.  Keep the
-  ;list of directories here in sync with the RMDir commands below.
-  SetOutPath "$INSTDIR"
-  @CPACK_NSIS_EXTRA_PREINSTALL_COMMANDS@
-  @CPACK_NSIS_FULL_INSTALL@
-
-  ;Store installation folder
-  WriteRegStr SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "" $INSTDIR
-
-  ;Create uninstaller
-  WriteUninstaller "$INSTDIR\Uninstall.exe"
-  Push "DisplayName"
-  Push "@CPACK_NSIS_DISPLAY_NAME@"
-  Call ConditionalAddToRegisty
-  Push "DisplayVersion"
-  Push "@CPACK_PACKAGE_VERSION@"
-  Call ConditionalAddToRegisty
-  Push "Publisher"
-  Push "@CPACK_PACKAGE_VENDOR@"
-  Call ConditionalAddToRegisty
-  Push "UninstallString"
-  Push "$INSTDIR\Uninstall.exe"
-  Call ConditionalAddToRegisty
-  Push "NoRepair"
-  Push "1"
-  Call ConditionalAddToRegisty
-
-  !ifdef CPACK_NSIS_ADD_REMOVE
-  ;Create add/remove functionality
-  Push "ModifyPath"
-  Push "$INSTDIR\AddRemove.exe"
-  Call ConditionalAddToRegisty
-  !else
-  Push "NoModify"
-  Push "1"
-  Call ConditionalAddToRegisty
-  !endif
-
-  ; Optional registration
-  Push "DisplayIcon"
-  Push "$INSTDIR\@CPACK_NSIS_INSTALLED_ICON_NAME@"
-  Call ConditionalAddToRegisty
-  Push "HelpLink"
-  Push "@CPACK_NSIS_HELP_LINK@"
-  Call ConditionalAddToRegisty
-  Push "URLInfoAbout"
-  Push "@CPACK_NSIS_URL_INFO_ABOUT@"
-  Call ConditionalAddToRegisty
-  Push "Contact"
-  Push "@CPACK_NSIS_CONTACT@"
-  Call ConditionalAddToRegisty
-  !insertmacro MUI_INSTALLOPTIONS_READ $INSTALL_DESKTOP "NSIS.InstallOptions.ini" "Field 5" "State"
-  !insertmacro MUI_STARTMENU_WRITE_BEGIN Application
-
-  ;Create shortcuts
-  CreateDirectory "$SMPROGRAMS\$STARTMENU_FOLDER"
-@CPACK_NSIS_CREATE_ICONS@
-@CPACK_NSIS_CREATE_ICONS_EXTRA@
-  CreateShortCut "$SMPROGRAMS\$STARTMENU_FOLDER\Uninstall.lnk" "$INSTDIR\Uninstall.exe"
-
-  ;Read a value from an InstallOptions INI file
-  !insertmacro MUI_INSTALLOPTIONS_READ $DO_NOT_ADD_TO_PATH "NSIS.InstallOptions.ini" "Field 2" "State"
-  !insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_ALL_USERS "NSIS.InstallOptions.ini" "Field 3" "State"
-  !insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_CURRENT_USER "NSIS.InstallOptions.ini" "Field 4" "State"
-
-  ; Write special uninstall registry entries
-  Push "StartMenu"
-  Push "$STARTMENU_FOLDER"
-  Call ConditionalAddToRegisty
-  Push "DoNotAddToPath"
-  Push "$DO_NOT_ADD_TO_PATH"
-  Call ConditionalAddToRegisty
-  Push "AddToPathAllUsers"
-  Push "$ADD_TO_PATH_ALL_USERS"
-  Call ConditionalAddToRegisty
-  Push "AddToPathCurrentUser"
-  Push "$ADD_TO_PATH_CURRENT_USER"
-  Call ConditionalAddToRegisty
-  Push "InstallToDesktop"
-  Push "$INSTALL_DESKTOP"
-  Call ConditionalAddToRegisty
-
-  !insertmacro MUI_STARTMENU_WRITE_END
-
-@CPACK_NSIS_EXTRA_INSTALL_COMMANDS@
-
-SectionEnd
-
-Section "-Add to path"
-  Push $INSTDIR\bin
-  StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 doNotAddToPath
-  StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0
-    Call AddToPath
-  doNotAddToPath:
-SectionEnd
-
-;--------------------------------
-; Create custom pages
-Function InstallOptionsPage
-  !insertmacro MUI_HEADER_TEXT "Install Options" "Choose options for installing @CPACK_NSIS_PACKAGE_NAME@"
-  !insertmacro MUI_INSTALLOPTIONS_DISPLAY "NSIS.InstallOptions.ini"
-
-FunctionEnd
-
-;--------------------------------
-; determine admin versus local install
-Function un.onInit
-
-  ClearErrors
-  UserInfo::GetName
-  IfErrors noLM
-  Pop $0
-  UserInfo::GetAccountType
-  Pop $1
-  StrCmp $1 "Admin" 0 +3
-    SetShellVarContext all
-    ;MessageBox MB_OK 'User "$0" is in the Admin group'
-    Goto done
-  StrCmp $1 "Power" 0 +3
-    SetShellVarContext all
-    ;MessageBox MB_OK 'User "$0" is in the Power Users group'
-    Goto done
-
-  noLM:
-    ;Get installation folder from registry if available
-
-  done:
-
-FunctionEnd
-
-;--- Add/Remove callback functions: ---
-!macro SectionList MacroName
-  ;This macro used to perform operation on multiple sections.
-  ;List all of your components in following manner here.
-@CPACK_NSIS_COMPONENT_SECTION_LIST@
-!macroend
-
-Section -FinishComponents
-  ;Removes unselected components and writes component status to registry
-  !insertmacro SectionList "FinishSection"
-
-!ifdef CPACK_NSIS_ADD_REMOVE
-  ; Get the name of the installer executable
-  System::Call 'kernel32::GetModuleFileNameA(i 0, t .R0, i 1024) i r1'
-  StrCpy $R3 $R0
-
-  ; Strip off the last 13 characters, to see if we have AddRemove.exe
-  StrLen $R1 $R0
-  IntOp $R1 $R0 - 13
-  StrCpy $R2 $R0 13 $R1
-  StrCmp $R2 "AddRemove.exe" addremove_installed
-
-  ; We're not running AddRemove.exe, so install it
-  CopyFiles $R3 $INSTDIR\AddRemove.exe
-
-  addremove_installed:
-!endif
-SectionEnd
-;--- End of Add/Remove callback functions ---
-
-;--------------------------------
-; Component dependencies
-Function .onSelChange
-  !insertmacro SectionList MaybeSelectionChanged
-FunctionEnd
-
-;--------------------------------
-;Uninstaller Section
-
-Section "Uninstall"
-  ReadRegStr $START_MENU SHCTX \
-   "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "StartMenu"
-  ;MessageBox MB_OK "Start menu is in: $START_MENU"
-  ReadRegStr $DO_NOT_ADD_TO_PATH SHCTX \
-    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "DoNotAddToPath"
-  ReadRegStr $ADD_TO_PATH_ALL_USERS SHCTX \
-    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "AddToPathAllUsers"
-  ReadRegStr $ADD_TO_PATH_CURRENT_USER SHCTX \
-    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "AddToPathCurrentUser"
-  ;MessageBox MB_OK "Add to path: $DO_NOT_ADD_TO_PATH all users: $ADD_TO_PATH_ALL_USERS"
-  ReadRegStr $INSTALL_DESKTOP SHCTX \
-    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "InstallToDesktop"
-  ;MessageBox MB_OK "Install to desktop: $INSTALL_DESKTOP "
-
-@CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS@
-
-  ;Remove files we installed.
-  ;Keep the list of directories here in sync with the File commands above.
-@CPACK_NSIS_DELETE_FILES@
-@CPACK_NSIS_DELETE_DIRECTORIES@
-
-!ifdef CPACK_NSIS_ADD_REMOVE
-  ;Remove the add/remove program
-  Delete "$INSTDIR\AddRemove.exe"
-!endif
-
-  ;Remove the uninstaller itself.
-  Delete "$INSTDIR\Uninstall.exe"
-  DeleteRegKey SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
-
-  ;Remove the installation directory if it is empty.
-  RMDir "$INSTDIR"
-
-  ; Remove the registry entries.
-  DeleteRegKey SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
-
-  ; Removes all optional components
-  !insertmacro SectionList "RemoveSection_CPack"
-
-  !insertmacro MUI_STARTMENU_GETFOLDER Application $MUI_TEMP
-
-  Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
-@CPACK_NSIS_DELETE_ICONS@
-@CPACK_NSIS_DELETE_ICONS_EXTRA@
-
-  ;Delete empty start menu parent diretories
-  StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
-
-  startMenuDeleteLoop:
-    ClearErrors
-    RMDir $MUI_TEMP
-    GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
-
-    IfErrors startMenuDeleteLoopDone
-
-    StrCmp "$MUI_TEMP" "$SMPROGRAMS" startMenuDeleteLoopDone startMenuDeleteLoop
-  startMenuDeleteLoopDone:
-
-  ; If the user changed the shortcut, then untinstall may not work. This should
-  ; try to fix it.
-  StrCpy $MUI_TEMP "$START_MENU"
-  Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
-@CPACK_NSIS_DELETE_ICONS_EXTRA@
-
-  ;Delete empty start menu parent diretories
-  StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
-
-  secondStartMenuDeleteLoop:
-    ClearErrors
-    RMDir $MUI_TEMP
-    GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
-
-    IfErrors secondStartMenuDeleteLoopDone
-
-    StrCmp "$MUI_TEMP" "$SMPROGRAMS" secondStartMenuDeleteLoopDone secondStartMenuDeleteLoop
-  secondStartMenuDeleteLoopDone:
-
-  DeleteRegKey /ifempty SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
-
-  Push $INSTDIR\bin
-  StrCmp $DO_NOT_ADD_TO_PATH_ "1" doNotRemoveFromPath 0
-    Call un.RemoveFromPath
-  doNotRemoveFromPath:
-SectionEnd
-
-;--------------------------------
-; determine admin versus local install
-; Is install for "AllUsers" or "JustMe"?
-; Default to "JustMe" - set to "AllUsers" if admin or on Win9x
-; This function is used for the very first "custom page" of the installer.
-; This custom page does not show up visibly, but it executes prior to the
-; first visible page and sets up $INSTDIR properly...
-; Choose different default installation folder based on SV_ALLUSERS...
-; "Program Files" for AllUsers, "My Documents" for JustMe...
-
-Function .onInit
-  StrCmp "@CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL@" "ON" 0 inst
-
-  ReadRegStr $0 HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "UninstallString"
-  StrCmp $0 "" inst
-
-  MessageBox MB_YESNOCANCEL|MB_ICONEXCLAMATION \
-  "@CPACK_NSIS_PACKAGE_NAME@ is already installed. $\n$\nDo you want to uninstall the old version before installing the new one?" \
-  IDYES uninst IDNO inst
-  Abort
-
-;Run the uninstaller
-uninst:
-  ClearErrors
-  StrLen $2 "\Uninstall.exe"
-  StrCpy $3 $0 -$2 # remove "\Uninstall.exe" from UninstallString to get path
-  ExecWait '$0 _?=$3' ;Do not copy the uninstaller to a temp file
-
-  IfErrors uninst_failed inst
-uninst_failed:
-  MessageBox MB_OK|MB_ICONSTOP "Uninstall failed."
-  Abort
-
-
-inst:
-  ; Reads components status for registry
-  !insertmacro SectionList "InitSection"
-
-  ; check to see if /D has been used to change
-  ; the install directory by comparing it to the
-  ; install directory that is expected to be the
-  ; default
-  StrCpy $IS_DEFAULT_INSTALLDIR 0
-  StrCmp "$INSTDIR" "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" 0 +2
-    StrCpy $IS_DEFAULT_INSTALLDIR 1
-
-  StrCpy $SV_ALLUSERS "JustMe"
-  ; if default install dir then change the default
-  ; if it is installed for JustMe
-  StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2
-    StrCpy $INSTDIR "$DOCUMENTS\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
-
-  ClearErrors
-  UserInfo::GetName
-  IfErrors noLM
-  Pop $0
-  UserInfo::GetAccountType
-  Pop $1
-  StrCmp $1 "Admin" 0 +4
-    SetShellVarContext all
-    ;MessageBox MB_OK 'User "$0" is in the Admin group'
-    StrCpy $SV_ALLUSERS "AllUsers"
-    Goto done
-  StrCmp $1 "Power" 0 +4
-    SetShellVarContext all
-    ;MessageBox MB_OK 'User "$0" is in the Power Users group'
-    StrCpy $SV_ALLUSERS "AllUsers"
-    Goto done
-
-  noLM:
-    StrCpy $SV_ALLUSERS "AllUsers"
-    ;Get installation folder from registry if available
-
-  done:
-  StrCmp $SV_ALLUSERS "AllUsers" 0 +3
-    StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2
-      StrCpy $INSTDIR "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
-
-  StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 noOptionsPage
-    !insertmacro MUI_INSTALLOPTIONS_EXTRACT "NSIS.InstallOptions.ini"
-
-  noOptionsPage:
-FunctionEnd
diff --git a/share/cmake-3.2/Modules/Platform/AIX-GNU.cmake b/share/cmake-3.2/Modules/Platform/AIX-GNU.cmake
deleted file mode 100644
index e5d9434..0000000
--- a/share/cmake-3.2/Modules/Platform/AIX-GNU.cmake
+++ /dev/null
@@ -1,27 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__AIX_COMPILER_GNU)
-  return()
-endif()
-set(__AIX_COMPILER_GNU 1)
-
-macro(__aix_compiler_gnu lang)
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,-blibpath:")
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS} -Wl,-G,-bnoipath")
-  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,-brtl,-bnoipath,-bexpall")  # +s, flag for exe link to use shared lib
-  set(CMAKE_${lang}_USE_IMPLICIT_LINK_DIRECTORIES_IN_RUNTIME_PATH 1)
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/AIX-XL.cmake b/share/cmake-3.2/Modules/Platform/AIX-XL.cmake
deleted file mode 100644
index abf3855..0000000
--- a/share/cmake-3.2/Modules/Platform/AIX-XL.cmake
+++ /dev/null
@@ -1,28 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__AIX_COMPILER_XL)
-  return()
-endif()
-set(__AIX_COMPILER_XL 1)
-
-macro(__aix_compiler_xl lang)
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,-blibpath:")
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-G -Wl,-bnoipath")  # -shared
-  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,-brtl,-bnoipath,-bexpall")  # +s, flag for exe link to use shared lib
-  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS " ")
-  set(CMAKE_SHARED_MODULE_${lang}_FLAGS  " ")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/AIX.cmake b/share/cmake-3.2/Modules/Platform/AIX.cmake
deleted file mode 100644
index 58c6483..0000000
--- a/share/cmake-3.2/Modules/Platform/AIX.cmake
+++ /dev/null
@@ -1,29 +0,0 @@
-set(CMAKE_SHARED_LIBRARY_PREFIX "lib")          # lib
-set(CMAKE_SHARED_LIBRARY_SUFFIX ".so")          # .so
-set(CMAKE_DL_LIBS "-lld")
-
-# RPATH support on AIX is called libpath.  By default the runtime
-# libpath is paths specified by -L followed by /usr/lib and /lib.  In
-# order to prevent the -L paths from being used we must force use of
-# -Wl,-blibpath:/usr/lib:/lib whether RPATH support is on or not.
-# When our own RPATH is to be added it may be inserted before the
-# "always" paths.
-set(CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH /usr/lib /lib)
-
-# Files named "libfoo.a" may actually be shared libraries.
-set_property(GLOBAL PROPERTY TARGET_ARCHIVES_MAY_BE_SHARED_LIBS 1)
-
-# since .a can be a static or shared library on AIX, we can not do this.
-# at some point if we wanted it, we would have to figure out if a .a is
-# static or shared, then we could add this back:
-
-# Initialize C link type selection flags.  These flags are used when
-# building a shared library, shared module, or executable that links
-# to other libraries to select whether to use the static or shared
-# versions of the libraries.
-#foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-#  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-bstatic")
-#  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-bdynamic")
-#endforeach()
-
-include(Platform/UnixPaths)
diff --git a/share/cmake-3.2/Modules/Platform/CYGWIN-GNU.cmake b/share/cmake-3.2/Modules/Platform/CYGWIN-GNU.cmake
deleted file mode 100644
index fe25ab2..0000000
--- a/share/cmake-3.2/Modules/Platform/CYGWIN-GNU.cmake
+++ /dev/null
@@ -1,56 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__CYGWIN_COMPILER_GNU)
-  return()
-endif()
-set(__CYGWIN_COMPILER_GNU 1)
-
-# TODO: Is -Wl,--enable-auto-import now always default?
-set(CMAKE_EXE_LINKER_FLAGS_INIT "-Wl,--enable-auto-import")
-set(CMAKE_CREATE_WIN32_EXE  "-mwindows")
-
-set(CMAKE_GNULD_IMAGE_VERSION
-  "-Wl,--major-image-version,<TARGET_VERSION_MAJOR>,--minor-image-version,<TARGET_VERSION_MINOR>")
-set(CMAKE_GENERATOR_RC windres)
-enable_language(RC)
-macro(__cygwin_compiler_gnu lang)
-  # Binary link rules.
-  set(CMAKE_${lang}_CREATE_SHARED_MODULE
-    "<CMAKE_${lang}_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_${lang}_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS> -o <TARGET> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
-  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
-    "<CMAKE_${lang}_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_${lang}_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS> -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
-  set(CMAKE_${lang}_LINK_EXECUTABLE
-    "<CMAKE_${lang}_COMPILER> <FLAGS> <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <LINK_LIBRARIES>")
-
-   # No -fPIC on cygwin
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "")
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "")
-  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "")
-
-  # Initialize C link type selection flags.  These flags are used when
-  # building a shared library, shared module, or executable that links
-  # to other libraries to select whether to use the static or shared
-  # versions of the libraries.
-  foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-    set(CMAKE_${type}_LINK_STATIC_${lang}_FLAGS "-Wl,-Bstatic")
-    set(CMAKE_${type}_LINK_DYNAMIC_${lang}_FLAGS "-Wl,-Bdynamic")
-  endforeach()
-
-  set(CMAKE_EXE_EXPORTS_${lang}_FLAG "-Wl,--export-all-symbols")
-  # TODO: Is -Wl,--enable-auto-import now always default?
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS} -Wl,--enable-auto-import")
-  set(CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS}")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/CYGWIN-windres.cmake b/share/cmake-3.2/Modules/Platform/CYGWIN-windres.cmake
deleted file mode 100644
index 01d6be3..0000000
--- a/share/cmake-3.2/Modules/Platform/CYGWIN-windres.cmake
+++ /dev/null
@@ -1 +0,0 @@
-set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <FLAGS> <DEFINES> <SOURCE> <OBJECT>")
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-AppleClang-C.cmake b/share/cmake-3.2/Modules/Platform/Darwin-AppleClang-C.cmake
deleted file mode 100644
index 98971bb..0000000
--- a/share/cmake-3.2/Modules/Platform/Darwin-AppleClang-C.cmake
+++ /dev/null
@@ -1 +0,0 @@
-include(Platform/Darwin-Clang-C)
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-AppleClang-CXX.cmake b/share/cmake-3.2/Modules/Platform/Darwin-AppleClang-CXX.cmake
deleted file mode 100644
index 4e9e7c1..0000000
--- a/share/cmake-3.2/Modules/Platform/Darwin-AppleClang-CXX.cmake
+++ /dev/null
@@ -1 +0,0 @@
-include(Platform/Darwin-Clang-CXX)
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Clang.cmake b/share/cmake-3.2/Modules/Platform/Darwin-Clang.cmake
deleted file mode 100644
index 4cded47..0000000
--- a/share/cmake-3.2/Modules/Platform/Darwin-Clang.cmake
+++ /dev/null
@@ -1,30 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2012 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__DARWIN_COMPILER_CLANG)
-  return()
-endif()
-set(__DARWIN_COMPILER_CLANG 1)
-
-macro(__darwin_compiler_clang lang)
-  set(CMAKE_${lang}_VERBOSE_FLAG "-v -Wl,-v") # also tell linker to print verbose output
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-dynamiclib -Wl,-headerpad_max_install_names")
-  set(CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS "-bundle -Wl,-headerpad_max_install_names")
-  set(CMAKE_${lang}_SYSROOT_FLAG "-isysroot")
-  set(CMAKE_${lang}_OSX_DEPLOYMENT_TARGET_FLAG "-mmacosx-version-min=")
-  if(NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 3.1)
-    set(CMAKE_${lang}_SYSTEM_FRAMEWORK_SEARCH_FLAG "-iframework ")
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Initialize.cmake b/share/cmake-3.2/Modules/Platform/Darwin-Initialize.cmake
deleted file mode 100644
index 62fb985..0000000
--- a/share/cmake-3.2/Modules/Platform/Darwin-Initialize.cmake
+++ /dev/null
@@ -1,151 +0,0 @@
-# Ask xcode-select where to find /Developer or fall back to ancient location.
-execute_process(COMMAND xcode-select -print-path
-  OUTPUT_VARIABLE _stdout
-  OUTPUT_STRIP_TRAILING_WHITESPACE
-  ERROR_VARIABLE _stderr
-  RESULT_VARIABLE _failed)
-if(NOT _failed AND IS_DIRECTORY ${_stdout})
-  set(OSX_DEVELOPER_ROOT ${_stdout})
-elseif(IS_DIRECTORY "/Developer")
-  set(OSX_DEVELOPER_ROOT "/Developer")
-else()
-  set(OSX_DEVELOPER_ROOT "")
-endif()
-
-execute_process(COMMAND sw_vers -productVersion
-  OUTPUT_VARIABLE CURRENT_OSX_VERSION
-  OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-# Save CMAKE_OSX_ARCHITECTURES from the environment.
-set(CMAKE_OSX_ARCHITECTURES "$ENV{CMAKE_OSX_ARCHITECTURES}" CACHE STRING
-  "Build architectures for OSX")
-
-#----------------------------------------------------------------------------
-# _CURRENT_OSX_VERSION - as a two-component string: 10.5, 10.6, ...
-#
-string(REGEX REPLACE "^([0-9]+\\.[0-9]+).*$" "\\1"
-  _CURRENT_OSX_VERSION "${CURRENT_OSX_VERSION}")
-
-#----------------------------------------------------------------------------
-# CMAKE_OSX_DEPLOYMENT_TARGET
-
-# Set cache variable - end user may change this during ccmake or cmake-gui configure.
-if(_CURRENT_OSX_VERSION VERSION_GREATER 10.3)
-  set(CMAKE_OSX_DEPLOYMENT_TARGET "$ENV{MACOSX_DEPLOYMENT_TARGET}" CACHE STRING
-    "Minimum OS X version to target for deployment (at runtime); newer APIs weak linked. Set to empty string for default value.")
-endif()
-
-#----------------------------------------------------------------------------
-# CMAKE_OSX_SYSROOT
-
-if(CMAKE_OSX_SYSROOT)
-  # Use the existing value without further computation to choose a default.
-  set(_CMAKE_OSX_SYSROOT_DEFAULT "${CMAKE_OSX_SYSROOT}")
-elseif(NOT "x$ENV{SDKROOT}" STREQUAL "x" AND
-        (NOT "x$ENV{SDKROOT}" MATCHES "/" OR IS_DIRECTORY "$ENV{SDKROOT}"))
-  # Use the value of SDKROOT from the environment.
-  set(_CMAKE_OSX_SYSROOT_DEFAULT "$ENV{SDKROOT}")
-elseif("${CMAKE_GENERATOR}" MATCHES Xcode
-       OR CMAKE_OSX_DEPLOYMENT_TARGET
-       OR CMAKE_OSX_ARCHITECTURES MATCHES "[^;]"
-       OR NOT EXISTS "/usr/include/sys/types.h")
-  # Find installed SDKs in either Xcode-4.3+ or pre-4.3 SDKs directory.
-  set(_CMAKE_OSX_SDKS_DIR "")
-  if(OSX_DEVELOPER_ROOT)
-    foreach(d Platforms/MacOSX.platform/Developer/SDKs SDKs)
-      file(GLOB _CMAKE_OSX_SDKS ${OSX_DEVELOPER_ROOT}/${d}/*)
-      if(_CMAKE_OSX_SDKS)
-        set(_CMAKE_OSX_SDKS_DIR ${OSX_DEVELOPER_ROOT}/${d})
-        break()
-      endif()
-    endforeach()
-  endif()
-
-  if(_CMAKE_OSX_SDKS_DIR)
-    # Select SDK for current OSX version accounting for the known
-    # specially named SDKs.
-    set(_CMAKE_OSX_SDKS_VER_SUFFIX_10.4 "u")
-    set(_CMAKE_OSX_SDKS_VER_SUFFIX_10.3 ".9")
-
-    # find the latest SDK
-    set(_CMAKE_OSX_LATEST_SDK_VERSION "0.0")
-    file(GLOB _CMAKE_OSX_SDKS RELATIVE "${_CMAKE_OSX_SDKS_DIR}" "${_CMAKE_OSX_SDKS_DIR}/MacOSX*.sdk")
-    foreach(_SDK ${_CMAKE_OSX_SDKS})
-      if(_SDK MATCHES "MacOSX([0-9]+\\.[0-9]+)[^/]*\\.sdk" AND CMAKE_MATCH_1 VERSION_GREATER ${_CMAKE_OSX_LATEST_SDK_VERSION})
-        set(_CMAKE_OSX_LATEST_SDK_VERSION "${CMAKE_MATCH_1}")
-      endif()
-    endforeach()
-
-    # pick an SDK that works
-    set(_CMAKE_OSX_SYSROOT_DEFAULT)
-    foreach(ver ${CMAKE_OSX_DEPLOYMENT_TARGET}
-                ${_CURRENT_OSX_VERSION}
-                ${_CMAKE_OSX_LATEST_SDK_VERSION})
-      set(_CMAKE_OSX_DEPLOYMENT_TARGET ${ver})
-      set(_CMAKE_OSX_SDKS_VER ${_CMAKE_OSX_DEPLOYMENT_TARGET}${_CMAKE_OSX_SDKS_VER_SUFFIX_${_CMAKE_OSX_DEPLOYMENT_TARGET}})
-      set(_CMAKE_OSX_SYSROOT_CHECK "${_CMAKE_OSX_SDKS_DIR}/MacOSX${_CMAKE_OSX_SDKS_VER}.sdk")
-      if(IS_DIRECTORY "${_CMAKE_OSX_SYSROOT_CHECK}")
-        set(_CMAKE_OSX_SYSROOT_DEFAULT "${_CMAKE_OSX_SYSROOT_CHECK}")
-        break()
-      endif()
-    endforeach()
-
-    if(CMAKE_OSX_DEPLOYMENT_TARGET AND
-        NOT CMAKE_OSX_DEPLOYMENT_TARGET VERSION_EQUAL ${_CMAKE_OSX_DEPLOYMENT_TARGET})
-      set(_CMAKE_OSX_SDKS_VER ${CMAKE_OSX_DEPLOYMENT_TARGET}${_CMAKE_OSX_SDKS_VER_SUFFIX_${CMAKE_OSX_DEPLOYMENT_TARGET}})
-      set(_CMAKE_OSX_SYSROOT_CHECK "${_CMAKE_OSX_SDKS_DIR}/MacOSX${_CMAKE_OSX_SDKS_VER}.sdk")
-      message(WARNING
-        "CMAKE_OSX_DEPLOYMENT_TARGET is '${CMAKE_OSX_DEPLOYMENT_TARGET}' "
-        "but the matching SDK does not exist at:\n \"${_CMAKE_OSX_SYSROOT_CHECK}\"\n"
-        "Instead using SDK:\n \"${_CMAKE_OSX_SYSROOT_DEFAULT}\"."
-        )
-    endif()
-  else()
-    # Assume developer files are in root (such as Xcode 4.5 command-line tools).
-    set(_CMAKE_OSX_SYSROOT_DEFAULT "")
-  endif()
-endif()
-
-# Set cache variable - end user may change this during ccmake or cmake-gui configure.
-# Choose the type based on the current value.
-set(_CMAKE_OSX_SYSROOT_TYPE STRING)
-foreach(v CMAKE_OSX_SYSROOT _CMAKE_OSX_SYSROOT_DEFAULT)
-  if("x${${v}}" MATCHES "/")
-    set(_CMAKE_OSX_SYSROOT_TYPE PATH)
-    break()
-  endif()
-endforeach()
-set(CMAKE_OSX_SYSROOT "${_CMAKE_OSX_SYSROOT_DEFAULT}" CACHE ${_CMAKE_OSX_SYSROOT_TYPE}
-  "The product will be built against the headers and libraries located inside the indicated SDK.")
-
-# Transform the cached value to something we can use.
-set(_CMAKE_OSX_SYSROOT_ORIG "${CMAKE_OSX_SYSROOT}")
-set(_CMAKE_OSX_SYSROOT_PATH "")
-if(CMAKE_OSX_SYSROOT)
-  if("x${CMAKE_OSX_SYSROOT}" MATCHES "/")
-    # This is a path to the SDK.  Make sure it exists.
-    if(NOT IS_DIRECTORY "${CMAKE_OSX_SYSROOT}")
-      message(WARNING "Ignoring CMAKE_OSX_SYSROOT value:\n ${CMAKE_OSX_SYSROOT}\n"
-        "because the directory does not exist.")
-      set(CMAKE_OSX_SYSROOT "")
-      set(_CMAKE_OSX_SYSROOT_ORIG "")
-    endif()
-    set(_CMAKE_OSX_SYSROOT_PATH "${CMAKE_OSX_SYSROOT}")
-  else()
-    # Transform the sdk name into a path.
-    execute_process(
-      COMMAND xcodebuild -sdk ${CMAKE_OSX_SYSROOT} -version Path
-      OUTPUT_VARIABLE _stdout
-      OUTPUT_STRIP_TRAILING_WHITESPACE
-      ERROR_VARIABLE _stderr
-      RESULT_VARIABLE _failed
-      )
-    if(NOT _failed AND IS_DIRECTORY "${_stdout}")
-      set(_CMAKE_OSX_SYSROOT_PATH "${_stdout}")
-      # For non-Xcode generators use the path.
-      if(NOT "${CMAKE_GENERATOR}" MATCHES "Xcode")
-        set(CMAKE_OSX_SYSROOT "${_CMAKE_OSX_SYSROOT_PATH}")
-      endif()
-    endif()
-  endif()
-endif()
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-NAG-Fortran.cmake b/share/cmake-3.2/Modules/Platform/Darwin-NAG-Fortran.cmake
deleted file mode 100644
index 4c28e62..0000000
--- a/share/cmake-3.2/Modules/Platform/Darwin-NAG-Fortran.cmake
+++ /dev/null
@@ -1,26 +0,0 @@
-#=============================================================================
-# Copyright 2010 Kitware, Inc.
-# Copyright 2013 OpenGamma Ltd. <graham@opengamma.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(CMAKE_Fortran_VERBOSE_FLAG "-Wl,-v") # Runs gcc under the hood.
-
-# Need -fpp explicitly on case-insensitive filesystem.
-set(CMAKE_Fortran_COMPILE_OBJECT
-  "<CMAKE_Fortran_COMPILER> -fpp -o <OBJECT> <DEFINES> <FLAGS> -c <SOURCE>")
-
-set(CMAKE_Fortran_OSX_COMPATIBILITY_VERSION_FLAG "-Wl,-compatibility_version -Wl,")
-set(CMAKE_Fortran_OSX_CURRENT_VERSION_FLAG "-Wl,-current_version -Wl,")
-set(CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS "-Wl,-shared")
-set(CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG "-Wl,-install_name -Wl,")
-set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
-  "<CMAKE_Fortran_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG><TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
diff --git a/share/cmake-3.2/Modules/Platform/Darwin.cmake b/share/cmake-3.2/Modules/Platform/Darwin.cmake
deleted file mode 100644
index e5c5f36..0000000
--- a/share/cmake-3.2/Modules/Platform/Darwin.cmake
+++ /dev/null
@@ -1,226 +0,0 @@
-set(APPLE 1)
-
-# Darwin versions:
-#   6.x == Mac OSX 10.2 (Jaguar)
-#   7.x == Mac OSX 10.3 (Panther)
-#   8.x == Mac OSX 10.4 (Tiger)
-#   9.x == Mac OSX 10.5 (Leopard)
-#  10.x == Mac OSX 10.6 (Snow Leopard)
-#  11.x == Mac OSX 10.7 (Lion)
-#  12.x == Mac OSX 10.8 (Mountain Lion)
-string(REGEX REPLACE "^([0-9]+)\\.([0-9]+).*$" "\\1" DARWIN_MAJOR_VERSION "${CMAKE_SYSTEM_VERSION}")
-string(REGEX REPLACE "^([0-9]+)\\.([0-9]+).*$" "\\2" DARWIN_MINOR_VERSION "${CMAKE_SYSTEM_VERSION}")
-
-# Do not use the "-Wl,-search_paths_first" flag with the OSX 10.2 compiler.
-# Done this way because it is too early to do a TRY_COMPILE.
-if(NOT DEFINED HAVE_FLAG_SEARCH_PATHS_FIRST)
-  set(HAVE_FLAG_SEARCH_PATHS_FIRST 0)
-  if("${DARWIN_MAJOR_VERSION}" GREATER 6)
-    set(HAVE_FLAG_SEARCH_PATHS_FIRST 1)
-  endif()
-endif()
-# More desirable, but does not work:
-  #include(CheckCXXCompilerFlag)
-  #CHECK_CXX_COMPILER_FLAG("-Wl,-search_paths_first" HAVE_FLAG_SEARCH_PATHS_FIRST)
-
-set(CMAKE_SHARED_LIBRARY_PREFIX "lib")
-set(CMAKE_SHARED_LIBRARY_SUFFIX ".dylib")
-set(CMAKE_SHARED_MODULE_PREFIX "lib")
-set(CMAKE_SHARED_MODULE_SUFFIX ".so")
-set(CMAKE_MODULE_EXISTS 1)
-set(CMAKE_DL_LIBS "")
-
-# Enable rpath support for 10.5 and greater where it is known to work.
-if("${DARWIN_MAJOR_VERSION}" GREATER 8)
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,")
-endif()
-
-set(CMAKE_C_OSX_COMPATIBILITY_VERSION_FLAG "-compatibility_version ")
-set(CMAKE_C_OSX_CURRENT_VERSION_FLAG "-current_version ")
-set(CMAKE_CXX_OSX_COMPATIBILITY_VERSION_FLAG "${CMAKE_C_OSX_COMPATIBILITY_VERSION_FLAG}")
-set(CMAKE_CXX_OSX_CURRENT_VERSION_FLAG "${CMAKE_C_OSX_CURRENT_VERSION_FLAG}")
-
-set(CMAKE_C_LINK_FLAGS "-Wl,-headerpad_max_install_names")
-set(CMAKE_CXX_LINK_FLAGS "-Wl,-headerpad_max_install_names")
-
-if(HAVE_FLAG_SEARCH_PATHS_FIRST)
-  set(CMAKE_C_LINK_FLAGS "-Wl,-search_paths_first ${CMAKE_C_LINK_FLAGS}")
-  set(CMAKE_CXX_LINK_FLAGS "-Wl,-search_paths_first ${CMAKE_CXX_LINK_FLAGS}")
-endif()
-
-set(CMAKE_PLATFORM_HAS_INSTALLNAME 1)
-set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-dynamiclib -Wl,-headerpad_max_install_names")
-set(CMAKE_SHARED_MODULE_CREATE_C_FLAGS "-bundle -Wl,-headerpad_max_install_names")
-set(CMAKE_SHARED_MODULE_LOADER_C_FLAG "-Wl,-bundle_loader,")
-set(CMAKE_SHARED_MODULE_LOADER_CXX_FLAG "-Wl,-bundle_loader,")
-set(CMAKE_FIND_LIBRARY_SUFFIXES ".dylib" ".so" ".a")
-
-# hack: if a new cmake (which uses CMAKE_INSTALL_NAME_TOOL) runs on an old build tree
-# (where install_name_tool was hardcoded) and where CMAKE_INSTALL_NAME_TOOL isn't in the cache
-# and still cmake didn't fail in CMakeFindBinUtils.cmake (because it isn't rerun)
-# hardcode CMAKE_INSTALL_NAME_TOOL here to install_name_tool, so it behaves as it did before, Alex
-if(NOT DEFINED CMAKE_INSTALL_NAME_TOOL)
-  find_program(CMAKE_INSTALL_NAME_TOOL install_name_tool)
-  mark_as_advanced(CMAKE_INSTALL_NAME_TOOL)
-endif()
-
-# Make sure the combination of SDK and Deployment Target are allowed
-if(CMAKE_OSX_DEPLOYMENT_TARGET)
-  if("${_CMAKE_OSX_SYSROOT_PATH}" MATCHES "/MacOSX([0-9]+\\.[0-9]+)[^/]*\\.sdk")
-    set(_sdk_ver "${CMAKE_MATCH_1}")
-  elseif("${_CMAKE_OSX_SYSROOT_ORIG}" MATCHES "^macosx([0-9]+\\.[0-9]+)$")
-    set(_sdk_ver "${CMAKE_MATCH_1}")
-  elseif("${_CMAKE_OSX_SYSROOT_ORIG}" STREQUAL "/")
-    set(_sdk_ver "${_CURRENT_OSX_VERSION}")
-  else()
-    message(FATAL_ERROR
-      "CMAKE_OSX_DEPLOYMENT_TARGET is '${CMAKE_OSX_DEPLOYMENT_TARGET}' "
-      "but CMAKE_OSX_SYSROOT:\n \"${_CMAKE_OSX_SYSROOT_ORIG}\"\n"
-      "is not set to a MacOSX SDK with a recognized version.  "
-      "Either set CMAKE_OSX_SYSROOT to a valid SDK or set "
-      "CMAKE_OSX_DEPLOYMENT_TARGET to empty.")
-  endif()
-  if(CMAKE_OSX_DEPLOYMENT_TARGET VERSION_GREATER "${_sdk_ver}")
-    message(FATAL_ERROR
-      "CMAKE_OSX_DEPLOYMENT_TARGET (${CMAKE_OSX_DEPLOYMENT_TARGET}) "
-      "is greater than CMAKE_OSX_SYSROOT SDK:\n ${_CMAKE_OSX_SYSROOT_ORIG}\n"
-      "Please set CMAKE_OSX_DEPLOYMENT_TARGET to ${_sdk_ver} or lower.")
-  endif()
-endif()
-
-# Enable shared library versioning.
-set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-install_name")
-
-# Xcode does not support -isystem yet.
-if(XCODE)
-  set(CMAKE_INCLUDE_SYSTEM_FLAG_C)
-  set(CMAKE_INCLUDE_SYSTEM_FLAG_CXX)
-endif()
-
-if("${_CURRENT_OSX_VERSION}" VERSION_LESS "10.5")
-  # Need to list dependent shared libraries on link line.  When building
-  # with -isysroot (for universal binaries), the linker always looks for
-  # dependent libraries under the sysroot.  Listing them on the link
-  # line works around the problem.
-  set(CMAKE_LINK_DEPENDENT_LIBRARY_FILES 1)
-endif()
-
-set(CMAKE_C_CREATE_SHARED_LIBRARY_FORBIDDEN_FLAGS -w)
-set(CMAKE_CXX_CREATE_SHARED_LIBRARY_FORBIDDEN_FLAGS -w)
-set(CMAKE_C_CREATE_SHARED_LIBRARY
-  "<CMAKE_C_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
-set(CMAKE_CXX_CREATE_SHARED_LIBRARY
-  "<CMAKE_CXX_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
-set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
-  "<CMAKE_Fortran_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
-
-set(CMAKE_CXX_CREATE_SHARED_MODULE
-      "<CMAKE_CXX_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS> <LINK_FLAGS> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
-
-set(CMAKE_C_CREATE_SHARED_MODULE
-      "<CMAKE_C_COMPILER>  <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_CREATE_C_FLAGS> <LINK_FLAGS> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
-
-set(CMAKE_Fortran_CREATE_SHARED_MODULE
-      "<CMAKE_Fortran_COMPILER>  <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS> <LINK_FLAGS> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
-
-set(CMAKE_C_CREATE_MACOSX_FRAMEWORK
-      "<CMAKE_C_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
-set(CMAKE_CXX_CREATE_MACOSX_FRAMEWORK
-      "<CMAKE_CXX_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
-
-# Set default framework search path flag for languages known to use a
-# preprocessor that may find headers in frameworks.
-set(CMAKE_C_FRAMEWORK_SEARCH_FLAG -F)
-set(CMAKE_CXX_FRAMEWORK_SEARCH_FLAG -F)
-set(CMAKE_Fortran_FRAMEWORK_SEARCH_FLAG -F)
-
-# default to searching for frameworks first
-if(NOT DEFINED CMAKE_FIND_FRAMEWORK)
-  set(CMAKE_FIND_FRAMEWORK FIRST)
-endif()
-
-# Older OS X linkers do not report their framework search path
-# with -v but "man ld" documents the following locations.
-set(CMAKE_PLATFORM_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
-  ${_CMAKE_OSX_SYSROOT_PATH}/Library/Frameworks
-  ${_CMAKE_OSX_SYSROOT_PATH}/System/Library/Frameworks
-  )
-if(_CMAKE_OSX_SYSROOT_PATH)
-  # Treat some paths as implicit so we do not override the SDK versions.
-  list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
-    /System/Library/Frameworks)
-endif()
-if("${_CURRENT_OSX_VERSION}" VERSION_LESS "10.5")
-  # Older OS X tools had more implicit paths.
-  list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
-    ${_CMAKE_OSX_SYSROOT_PATH}/Network/Library/Frameworks)
-endif()
-
-# set up the default search directories for frameworks
-set(CMAKE_SYSTEM_FRAMEWORK_PATH
-  ~/Library/Frameworks
-  )
-if(_CMAKE_OSX_SYSROOT_PATH)
-  list(APPEND CMAKE_SYSTEM_FRAMEWORK_PATH
-    ${_CMAKE_OSX_SYSROOT_PATH}/Library/Frameworks
-    ${_CMAKE_OSX_SYSROOT_PATH}/Network/Library/Frameworks
-    ${_CMAKE_OSX_SYSROOT_PATH}/System/Library/Frameworks
-    )
-endif()
-list(APPEND CMAKE_SYSTEM_FRAMEWORK_PATH
-  /Library/Frameworks
-  /Network/Library/Frameworks
-  /System/Library/Frameworks)
-
-# Warn about known system mis-configuration case.
-if(CMAKE_OSX_SYSROOT)
-  get_property(_IN_TC GLOBAL PROPERTY IN_TRY_COMPILE)
-  if(NOT _IN_TC AND
-     NOT IS_SYMLINK "${CMAKE_OSX_SYSROOT}/Library/Frameworks"
-     AND IS_SYMLINK "${CMAKE_OSX_SYSROOT}/Library/Frameworks/Frameworks")
-    message(WARNING "The SDK Library/Frameworks path\n"
-      " ${CMAKE_OSX_SYSROOT}/Library/Frameworks\n"
-      "is not set up correctly on this system.  "
-      "This is known to occur when installing Xcode 3.2.6:\n"
-      " http://bugs.python.org/issue14018\n"
-      "The problem may cause build errors that report missing system frameworks.  "
-      "Fix your SDK symlinks to resolve this issue and avoid this warning."
-      )
-  endif()
-endif()
-
-# default to searching for application bundles first
-if(NOT DEFINED CMAKE_FIND_APPBUNDLE)
-  set(CMAKE_FIND_APPBUNDLE FIRST)
-endif()
-# set up the default search directories for application bundles
-set(_apps_paths)
-foreach(_path
-  "~/Applications"
-  "/Applications"
-  "${OSX_DEVELOPER_ROOT}/../Applications" # Xcode 4.3+
-  "${OSX_DEVELOPER_ROOT}/Applications"    # pre-4.3
-  )
-  get_filename_component(_apps "${_path}" ABSOLUTE)
-  if(EXISTS "${_apps}")
-    list(APPEND _apps_paths "${_apps}")
-  endif()
-endforeach()
-if(_apps_paths)
-  list(REMOVE_DUPLICATES _apps_paths)
-endif()
-set(CMAKE_SYSTEM_APPBUNDLE_PATH
-  ${_apps_paths})
-unset(_apps_paths)
-
-include(Platform/UnixPaths)
-if(_CMAKE_OSX_SYSROOT_PATH AND EXISTS ${_CMAKE_OSX_SYSROOT_PATH}/usr/include)
-  list(APPEND CMAKE_SYSTEM_PREFIX_PATH ${_CMAKE_OSX_SYSROOT_PATH}/usr)
-  foreach(lang C CXX)
-    list(APPEND CMAKE_${lang}_IMPLICIT_INCLUDE_DIRECTORIES ${_CMAKE_OSX_SYSROOT_PATH}/usr/include)
-  endforeach()
-endif()
-list(APPEND CMAKE_SYSTEM_PREFIX_PATH
-  /sw        # Fink
-  /opt/local # MacPorts
-  )
diff --git a/share/cmake-3.2/Modules/Platform/Generic-ADSP-ASM.cmake b/share/cmake-3.2/Modules/Platform/Generic-ADSP-ASM.cmake
deleted file mode 100644
index 63a1388..0000000
--- a/share/cmake-3.2/Modules/Platform/Generic-ADSP-ASM.cmake
+++ /dev/null
@@ -1,7 +0,0 @@
-include(Platform/Generic-ADSP-Common)
-
-set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS asm)
-set(CMAKE_ASM_OUTPUT_EXTENSION ".doj" )
-set(CMAKE_ASM_COMPILE_OBJECT
-    "<CMAKE_ASM_COMPILER> <FLAGS> -proc ${ADSP_PROCESSOR} -si-revision ${ADSP_PROCESSOR_SILICIUM_REVISION} -o <OBJECT> <SOURCE>")
-
diff --git a/share/cmake-3.2/Modules/Platform/Generic-SDCC-C.cmake b/share/cmake-3.2/Modules/Platform/Generic-SDCC-C.cmake
deleted file mode 100644
index 588bf32..0000000
--- a/share/cmake-3.2/Modules/Platform/Generic-SDCC-C.cmake
+++ /dev/null
@@ -1,54 +0,0 @@
-
-# This file implements basic support for sdcc (http://sdcc.sourceforge.net/)
-# a free C compiler for 8 and 16 bit microcontrollers.
-# To use it either a toolchain file is required or cmake has to be run like this:
-# cmake -DCMAKE_C_COMPILER=sdcc -DCMAKE_SYSTEM_NAME=Generic <dir...>
-# Since sdcc doesn't support C++, C++ support should be disabled in the
-# CMakeLists.txt using the project() command:
-# project(my_project C)
-
-set(CMAKE_STATIC_LIBRARY_PREFIX "")
-set(CMAKE_STATIC_LIBRARY_SUFFIX ".lib")
-set(CMAKE_SHARED_LIBRARY_PREFIX "")          # lib
-set(CMAKE_SHARED_LIBRARY_SUFFIX ".lib")          # .so
-set(CMAKE_IMPORT_LIBRARY_PREFIX )
-set(CMAKE_IMPORT_LIBRARY_SUFFIX )
-set(CMAKE_EXECUTABLE_SUFFIX ".ihx")          # intel hex file
-set(CMAKE_LINK_LIBRARY_SUFFIX ".lib")
-set(CMAKE_DL_LIBS "")
-
-set(CMAKE_C_OUTPUT_EXTENSION ".rel")
-
-# find sdcclib as CMAKE_AR
-# since cmake may already have searched for "ar", sdcclib has to
-# be searched with a different variable name (SDCCLIB_EXECUTABLE)
-# and must then be forced into the cache
-get_filename_component(SDCC_LOCATION "${CMAKE_C_COMPILER}" PATH)
-find_program(SDCCLIB_EXECUTABLE sdcclib PATHS "${SDCC_LOCATION}" NO_DEFAULT_PATH)
-find_program(SDCCLIB_EXECUTABLE sdcclib)
-set(CMAKE_AR "${SDCCLIB_EXECUTABLE}" CACHE FILEPATH "The sdcc librarian" FORCE)
-
-# CMAKE_C_FLAGS_INIT and CMAKE_EXE_LINKER_FLAGS_INIT should be set in a CMAKE_SYSTEM_PROCESSOR file
-if(NOT DEFINED CMAKE_C_FLAGS_INIT)
-  set(CMAKE_C_FLAGS_INIT "-mmcs51 --model-small")
-endif()
-
-if(NOT DEFINED CMAKE_EXE_LINKER_FLAGS_INIT)
-  set (CMAKE_EXE_LINKER_FLAGS_INIT --model-small)
-endif()
-
-# compile a C file into an object file
-set(CMAKE_C_COMPILE_OBJECT  "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -o <OBJECT> -c <SOURCE>")
-
-# link object files to an executable
-set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_C_COMPILER> <FLAGS> <OBJECTS> --out-fmt-ihx -o  <TARGET> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>")
-
-# needs sdcc 2.7.0 + sddclib from cvs
-set(CMAKE_C_CREATE_STATIC_LIBRARY
-      "\"${CMAKE_COMMAND}\" -E remove <TARGET>"
-      "<CMAKE_AR> -a <TARGET> <LINK_FLAGS> <OBJECTS> ")
-
-# not supported by sdcc
-set(CMAKE_C_CREATE_SHARED_LIBRARY "")
-set(CMAKE_C_CREATE_MODULE_LIBRARY "")
-
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-GNU.cmake b/share/cmake-3.2/Modules/Platform/HP-UX-GNU.cmake
deleted file mode 100644
index eb909fe..0000000
--- a/share/cmake-3.2/Modules/Platform/HP-UX-GNU.cmake
+++ /dev/null
@@ -1,27 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__HPUX_COMPILER_GNU)
-  return()
-endif()
-set(__HPUX_COMPILER_GNU 1)
-
-macro(__hpux_compiler_gnu lang)
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS} -Wl,-E,-b,+nodefaultrpath")
-  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,+s,-E,+nodefaultrpath")
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,+b")
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
-  set(CMAKE_SHARED_LIBRARY_SONAME_${lang}_FLAG "-Wl,+h")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-HP-C.cmake b/share/cmake-3.2/Modules/Platform/HP-UX-HP-C.cmake
deleted file mode 100644
index 1000935..0000000
--- a/share/cmake-3.2/Modules/Platform/HP-UX-HP-C.cmake
+++ /dev/null
@@ -1,6 +0,0 @@
-include(Platform/HP-UX-HP)
-__hpux_compiler_hp(C)
-
-set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
-set(CMAKE_C_COMPILE_OBJECT "<CMAKE_C_COMPILER> <DEFINES> -Aa -Ae <FLAGS> -o <OBJECT>   -c <SOURCE>")
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-HP-CXX.cmake b/share/cmake-3.2/Modules/Platform/HP-UX-HP-CXX.cmake
deleted file mode 100644
index dfa1e4e..0000000
--- a/share/cmake-3.2/Modules/Platform/HP-UX-HP-CXX.cmake
+++ /dev/null
@@ -1,14 +0,0 @@
-include(Platform/HP-UX-HP)
-__hpux_compiler_hp(CXX)
-
-set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE
-  "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -S <SOURCE>"
-  "mv `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.s <ASSEMBLY_SOURCE>"
-  "rm -f `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.o"
-  )
-
-set(CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
-set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "+O3 -DNDEBUG")
-set(CMAKE_CXX_FLAGS_RELEASE_INIT "+O2 -DNDEBUG")
-set(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-g")
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-HP-Fortran.cmake b/share/cmake-3.2/Modules/Platform/HP-UX-HP-Fortran.cmake
deleted file mode 100644
index e5c5d10..0000000
--- a/share/cmake-3.2/Modules/Platform/HP-UX-HP-Fortran.cmake
+++ /dev/null
@@ -1,5 +0,0 @@
-include(Platform/HP-UX-HP)
-__hpux_compiler_hp(Fortran)
-
-set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-HP.cmake b/share/cmake-3.2/Modules/Platform/HP-UX-HP.cmake
deleted file mode 100644
index 871ea13..0000000
--- a/share/cmake-3.2/Modules/Platform/HP-UX-HP.cmake
+++ /dev/null
@@ -1,31 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__HPUX_COMPILER_HP)
-  return()
-endif()
-set(__HPUX_COMPILER_HP 1)
-
-macro(__hpux_compiler_hp lang)
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "+Z")
-  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "+Z")
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-Wl,-E,+nodefaultrpath -b -L/usr/lib")
-  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,+s,-E,+nodefaultrpath")
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,+b")
-  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
-  set(CMAKE_SHARED_LIBRARY_SONAME_${lang}_FLAG "-Wl,+h")
-
-  set(CMAKE_${lang}_FLAGS_INIT "")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX.cmake b/share/cmake-3.2/Modules/Platform/HP-UX.cmake
deleted file mode 100644
index 65cc731..0000000
--- a/share/cmake-3.2/Modules/Platform/HP-UX.cmake
+++ /dev/null
@@ -1,50 +0,0 @@
-set(CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH /usr/lib)
-
-set(CMAKE_SHARED_LIBRARY_SUFFIX ".sl")          # .so
-set(CMAKE_DL_LIBS "dld")
-set(CMAKE_FIND_LIBRARY_SUFFIXES ".sl" ".so" ".a")
-set(CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES ".so")
-
-# The HP linker needs to find transitive shared library dependencies
-# in the -L path.  Therefore the runtime path must be added to the
-# link line with -L flags.
-set(CMAKE_SHARED_LIBRARY_LINK_C_WITH_RUNTIME_PATH 1)
-set(CMAKE_LINK_DEPENDENT_LIBRARY_DIRS 1)
-
-# Shared libraries with no builtin soname may not be linked safely by
-# specifying the file path.
-set(CMAKE_PLATFORM_USES_PATH_WHEN_NO_SONAME 1)
-
-# set flags for gcc support
-include(Platform/UnixPaths)
-
-# Look in both 32-bit and 64-bit implict link directories, but tell
-# CMake not to pass the paths to the linker.  The linker will find the
-# library for the proper architecture.  In the future we should detect
-# which path will be used by the linker.  Since the pointer type size
-# CMAKE_SIZEOF_VOID_P is not set until after this file executes, we
-# would need to append to CMAKE_SYSTEM_LIBRARY_PATH at a later point
-# (after CMakeTest(LANG)Compiler.cmake runs for at least one language).
-list(APPEND CMAKE_SYSTEM_LIBRARY_PATH /usr/lib/hpux32)
-list(APPEND CMAKE_SYSTEM_LIBRARY_PATH /usr/lib/hpux64)
-list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES
-  /usr/lib/hpux32 /usr/lib/hpux64)
-
-# Initialize C and CXX link type selection flags.  These flags are
-# used when building a shared library, shared module, or executable
-# that links to other libraries to select whether to use the static or
-# shared versions of the libraries.  Note that C modules and shared
-# libs are built using ld directly so we leave off the "-Wl," portion.
-foreach(type SHARED_LIBRARY SHARED_MODULE)
-  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-a archive")
-  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-a default")
-endforeach()
-foreach(type EXE)
-  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-Wl,-a,archive")
-  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-Wl,-a,default")
-endforeach()
-foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-  set(CMAKE_${type}_LINK_STATIC_CXX_FLAGS "-Wl,-a,archive")
-  set(CMAKE_${type}_LINK_DYNAMIC_CXX_FLAGS "-Wl,-a,default")
-endforeach()
-
diff --git a/share/cmake-3.2/Modules/Platform/IRIX64.cmake b/share/cmake-3.2/Modules/Platform/IRIX64.cmake
deleted file mode 100644
index 5acbd81..0000000
--- a/share/cmake-3.2/Modules/Platform/IRIX64.cmake
+++ /dev/null
@@ -1,73 +0,0 @@
-set(CMAKE_DL_LIBS "")
-set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared -rdata_shared")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,")       # -rpath
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP "")   # : or empty
-set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-Wl,-soname,")
-if(NOT CMAKE_COMPILER_IS_GNUCC)
-  # Set default flags init.
-  set(CMAKE_C_FLAGS_INIT "")
-  set(CMAKE_CXX_FLAGS_INIT "")
-  set(CMAKE_Fortran_FLAGS_INIT "")
-  set(CMAKE_EXE_LINKER_FLAGS_INIT "")
-  set(CMAKE_SHARED_LINKER_FLAGS_INIT "")
-  set(CMAKE_MODULE_LINKER_FLAGS_INIT "")
-
-  # If no -o32, -n32, or -64 flag is given, set a reasonable default.
-  if("$ENV{CFLAGS} $ENV{CXXFLAGS} $ENV{LDFLAGS}" MATCHES "-([no]32|64)")
-  else()
-    # Check if this is a 64-bit CMake.
-    if(CMAKE_FILE_SELF MATCHES "^CMAKE_FILE_SELF$")
-      exec_program(file ARGS ${CMAKE_COMMAND} OUTPUT_VARIABLE CMAKE_FILE_SELF)
-      set(CMAKE_FILE_SELF "${CMAKE_FILE_SELF}" CACHE INTERNAL
-        "Output of file command on ${CMAKE_COMMAND}.")
-    endif()
-
-    # Set initial flags to match cmake executable.
-    if(CMAKE_FILE_SELF MATCHES " 64-bit ")
-      set(CMAKE_C_FLAGS_INIT "-64")
-      set(CMAKE_CXX_FLAGS_INIT "-64")
-      set(CMAKE_Fortran_FLAGS_INIT "-64")
-      set(CMAKE_EXE_LINKER_FLAGS_INIT "-64")
-      set(CMAKE_SHARED_LINKER_FLAGS_INIT "-64")
-      set(CMAKE_MODULE_LINKER_FLAGS_INIT "-64")
-    endif()
-  endif()
-
-  # Set remaining defaults.
-  set(CMAKE_CXX_CREATE_STATIC_LIBRARY
-      "<CMAKE_CXX_COMPILER> -ar -o <TARGET> <OBJECTS>")
-  set (CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
-  set (CMAKE_CXX_FLAGS_MINSIZEREL_INIT "-O3 -DNDEBUG")
-  set (CMAKE_CXX_FLAGS_RELEASE_INIT "-O2 -DNDEBUG")
-  set (CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-O2")
-endif()
-include(Platform/UnixPaths)
-
-if(NOT CMAKE_COMPILER_IS_GNUCC)
-  set (CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-  set (CMAKE_C_CREATE_ASSEMBLY_SOURCE
-    "<CMAKE_C_COMPILER> <DEFINES> <FLAGS> -S <SOURCE>"
-    "mv `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.s <ASSEMBLY_SOURCE>"
-    )
-endif()
-
-if(NOT CMAKE_COMPILER_IS_GNUCXX)
-  set (CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-  set (CMAKE_CXX_CREATE_ASSEMBLY_SOURCE
-    "<CMAKE_CXX_COMPILER> <DEFINES> <FLAGS> -S <SOURCE>"
-    "mv `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.s <ASSEMBLY_SOURCE>"
-    )
-endif()
-
-# Initialize C link type selection flags.  These flags are used when
-# building a shared library, shared module, or executable that links
-# to other libraries to select whether to use the static or shared
-# versions of the libraries.
-foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-Wl,-Bstatic")
-  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-Wl,-Bdynamic")
-endforeach()
-
-# The IRIX linker needs to find transitive shared library dependencies
-# in the -L path.
-set(CMAKE_LINK_DEPENDENT_LIBRARY_DIRS 1)
diff --git a/share/cmake-3.2/Modules/Platform/Linux-GNU-Fortran.cmake b/share/cmake-3.2/Modules/Platform/Linux-GNU-Fortran.cmake
deleted file mode 100644
index 68e9540..0000000
--- a/share/cmake-3.2/Modules/Platform/Linux-GNU-Fortran.cmake
+++ /dev/null
@@ -1,2 +0,0 @@
-include(Platform/Linux-GNU)
-__linux_compiler_gnu(Fortran)
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PGI.cmake b/share/cmake-3.2/Modules/Platform/Linux-PGI.cmake
deleted file mode 100644
index 3cbb35c..0000000
--- a/share/cmake-3.2/Modules/Platform/Linux-PGI.cmake
+++ /dev/null
@@ -1,27 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__LINUX_COMPILER_PGI)
-  return()
-endif()
-set(__LINUX_COMPILER_PGI 1)
-
-macro(__linux_compiler_pgi lang)
-  # Shared library compile and link flags.
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "-fPIC")
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "-fPIE")
-  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "-fPIC")
-  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-shared")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Linux.cmake b/share/cmake-3.2/Modules/Platform/Linux.cmake
deleted file mode 100644
index fe8e003..0000000
--- a/share/cmake-3.2/Modules/Platform/Linux.cmake
+++ /dev/null
@@ -1,57 +0,0 @@
-set(CMAKE_DL_LIBS "dl")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,")
-set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":")
-set(CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG "-Wl,-rpath-link,")
-set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-Wl,-soname,")
-set(CMAKE_EXE_EXPORTS_C_FLAG "-Wl,--export-dynamic")
-
-# Shared libraries with no builtin soname may not be linked safely by
-# specifying the file path.
-set(CMAKE_PLATFORM_USES_PATH_WHEN_NO_SONAME 1)
-
-# Initialize C link type selection flags.  These flags are used when
-# building a shared library, shared module, or executable that links
-# to other libraries to select whether to use the static or shared
-# versions of the libraries.
-foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-Wl,-Bstatic")
-  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-Wl,-Bdynamic")
-endforeach()
-
-# Debian policy requires that shared libraries be installed without
-# executable permission.  Fedora policy requires that shared libraries
-# be installed with the executable permission.  Since the native tools
-# create shared libraries with execute permission in the first place a
-# reasonable policy seems to be to install with execute permission by
-# default.  In order to support debian packages we provide an option
-# here.  The option default is based on the current distribution, but
-# packagers can set it explicitly on the command line.
-if(DEFINED CMAKE_INSTALL_SO_NO_EXE)
-  # Store the decision variable in the cache.  This preserves any
-  # setting the user provides on the command line.
-  set(CMAKE_INSTALL_SO_NO_EXE "${CMAKE_INSTALL_SO_NO_EXE}" CACHE INTERNAL
-    "Install .so files without execute permission.")
-else()
-  # Store the decision variable as an internal cache entry to avoid
-  # checking the platform every time.  This option is advanced enough
-  # that only package maintainers should need to adjust it.  They are
-  # capable of providing a setting on the command line.
-  if(EXISTS "/etc/debian_version")
-    set(CMAKE_INSTALL_SO_NO_EXE 1 CACHE INTERNAL
-      "Install .so files without execute permission.")
-  else()
-    set(CMAKE_INSTALL_SO_NO_EXE 0 CACHE INTERNAL
-      "Install .so files without execute permission.")
-  endif()
-endif()
-
-# Match multiarch library directory names.
-set(CMAKE_LIBRARY_ARCHITECTURE_REGEX "[a-z0-9_]+(-[a-z0-9_]+)?-linux-gnu[a-z0-9_]*")
-
-include(Platform/UnixPaths)
-
-# Debian has lib64 paths only for compatibility so they should not be
-# searched.
-if(EXISTS "/etc/debian_version")
-  set_property(GLOBAL PROPERTY FIND_LIBRARY_USE_LIB64_PATHS FALSE)
-endif()
diff --git a/share/cmake-3.2/Modules/Platform/SunOS.cmake b/share/cmake-3.2/Modules/Platform/SunOS.cmake
deleted file mode 100644
index aaa79c4..0000000
--- a/share/cmake-3.2/Modules/Platform/SunOS.cmake
+++ /dev/null
@@ -1,32 +0,0 @@
-if(CMAKE_SYSTEM MATCHES "SunOS-4")
-   set(CMAKE_C_COMPILE_OPTIONS_PIC "-PIC")
-   set(CMAKE_C_COMPILE_OPTIONS_PIE "-PIE")
-   set(CMAKE_SHARED_LIBRARY_C_FLAGS "-PIC")
-   set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared -Wl,-r")
-   set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-R")
-   set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":")
-endif()
-
-if(CMAKE_COMPILER_IS_GNUCXX)
-  if(CMAKE_COMPILER_IS_GNUCC)
-    set(CMAKE_CXX_CREATE_SHARED_LIBRARY
-        "<CMAKE_C_COMPILER> <CMAKE_SHARED_LIBRARY_CXX_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS>  <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
-  else()
-    # Take default rule from CMakeDefaultMakeRuleVariables.cmake.
-  endif()
-endif()
-include(Platform/UnixPaths)
-
-# Add the compiler's implicit link directories.
-if("${CMAKE_C_COMPILER_ID} ${CMAKE_CXX_COMPILER_ID}" MATCHES SunPro)
-  list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES
-    /opt/SUNWspro/lib /opt/SUNWspro/prod/lib /usr/ccs/lib)
-endif()
-
-# The Sun linker needs to find transitive shared library dependencies
-# in the -L path.
-set(CMAKE_LINK_DEPENDENT_LIBRARY_DIRS 1)
-
-# Shared libraries with no builtin soname may not be linked safely by
-# specifying the file path.
-set(CMAKE_PLATFORM_USES_PATH_WHEN_NO_SONAME 1)
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Embarcadero.cmake b/share/cmake-3.2/Modules/Platform/Windows-Embarcadero.cmake
deleted file mode 100644
index 26b3c0c..0000000
--- a/share/cmake-3.2/Modules/Platform/Windows-Embarcadero.cmake
+++ /dev/null
@@ -1,131 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2012 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__WINDOWS_EMBARCADERO)
-  return()
-endif()
-set(__WINDOWS_EMBARCADERO 1)
-
-set(BORLAND 1)
-
-if("${CMAKE_${_lang}_COMPILER_VERSION}" VERSION_LESS 6.30)
-  # Borland target type flags (bcc32 -h -t):
-  set(_tW "-tW")       # -tW  GUI App         (implies -U__CONSOLE__)
-  set(_tC "-tWC")      # -tWC Console App     (implies -D__CONSOLE__=1)
-  set(_tD "-tWD")      # -tWD Build a DLL     (implies -D__DLL__=1 -D_DLL=1)
-  set(_tM "-tWM")      # -tWM Enable threads  (implies -D__MT__=1 -D_MT=1)
-  set(_tR "-tWR -tW-") # -tWR Use DLL runtime (implies -D_RTLDLL, and '-tW' too!!)
-  # Notes:
-  #  - The flags affect linking so we pass them to the linker.
-  #  - The flags affect preprocessing so we pass them to the compiler.
-  #  - Since '-tWR' implies '-tW' we use '-tWR -tW-' instead.
-  #  - Since '-tW-' disables '-tWD' we use '-tWR -tW- -tWD' for DLLs.
-else()
-  set(EMBARCADERO 1)
-  set(_tC "-tC") # Target is a console application
-  set(_tD "-tD") # Target is a shared library
-  set(_tM "-tM") # Target is multi-threaded
-  set(_tR "-tR") # Target uses the dynamic RTL
-  set(_tW "-tW") # Target is a Windows application
-endif()
-set(_COMPILE_C "-c")
-set(_COMPILE_CXX "-P -c")
-
-set(CMAKE_LIBRARY_PATH_FLAG "-L")
-set(CMAKE_LINK_LIBRARY_FLAG "")
-
-set(CMAKE_FIND_LIBRARY_SUFFIXES "-bcc.lib" ".lib")
-
-# uncomment these out to debug makefiles
-#set(CMAKE_START_TEMP_FILE "")
-#set(CMAKE_END_TEMP_FILE "")
-#set(CMAKE_VERBOSE_MAKEFILE 1)
-
-# Borland cannot handle + in the file name, so mangle object file name
-set (CMAKE_MANGLE_OBJECT_FILE_NAMES "ON")
-
-# extra flags for a win32 exe
-set(CMAKE_CREATE_WIN32_EXE "${_tW}" )
-# extra flags for a console app
-set(CMAKE_CREATE_CONSOLE_EXE "${_tC}" )
-
-set (CMAKE_BUILD_TYPE Debug CACHE STRING
-     "Choose the type of build, options are: Debug Release RelWithDebInfo MinSizeRel.")
-
-set (CMAKE_EXE_LINKER_FLAGS_INIT "${_tM} -lS:1048576 -lSc:4098 -lH:1048576 -lHc:8192 ")
-set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "-v")
-set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "-v")
-set (CMAKE_SHARED_LINKER_FLAGS_INIT ${CMAKE_EXE_LINKER_FLAGS_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT ${CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_INIT ${CMAKE_SHARED_LINKER_FLAGS_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_DEBUG_INIT ${CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT})
-
-
-macro(__embarcadero_language lang)
-  set(CMAKE_${lang}_COMPILE_OPTIONS_DLL "${_tD}") # Note: This variable is a ';' separated list
-  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "${_tD}") # ... while this is a space separated string.
-  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_INCLUDES 1)
-
-  # compile a source file into an object file
-  # place <DEFINES> outside the response file because Borland refuses
-  # to parse quotes from the response file.
-  set(CMAKE_${lang}_COMPILE_OBJECT
-    "<CMAKE_${lang}_COMPILER> ${_tR} <DEFINES> -DWIN32 -o<OBJECT> <FLAGS> ${_COMPILE_${lang}} <SOURCE>"
-    )
-
-  set(CMAKE_${lang}_LINK_EXECUTABLE
-    "<CMAKE_${lang}_COMPILER> ${_tR} -e<TARGET> <LINK_FLAGS> <FLAGS> ${CMAKE_START_TEMP_FILE} <LINK_LIBRARIES> <OBJECTS>${CMAKE_END_TEMP_FILE}"
-    # "implib -c -w <TARGET_IMPLIB> <TARGET>"
-    )
-
-  # place <DEFINES> outside the response file because Borland refuses
-  # to parse quotes from the response file.
-  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE
-    "cpp32 <DEFINES> -DWIN32 <FLAGS> -o<PREPROCESSED_SOURCE> ${_COMPILE_${lang}} <SOURCE>"
-    )
-  # Borland >= 5.6 allows -P option for cpp32, <= 5.5 does not
-
-  # Create a module library.
-  set(CMAKE_${lang}_CREATE_SHARED_MODULE
-    "<CMAKE_${lang}_COMPILER> ${_tR} ${_tD} ${CMAKE_START_TEMP_FILE}-e<TARGET> <LINK_FLAGS> <LINK_LIBRARIES> <OBJECTS>${CMAKE_END_TEMP_FILE}"
-    )
-
-  # Create an import library for another target.
-  set(CMAKE_${lang}_CREATE_IMPORT_LIBRARY
-    "implib -c -w <TARGET_IMPLIB> <TARGET>"
-    )
-
-  # Create a shared library.
-  # First create a module and then its import library.
-  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
-    ${CMAKE_${lang}_CREATE_SHARED_MODULE}
-    ${CMAKE_${lang}_CREATE_IMPORT_LIBRARY}
-    )
-
-  # create a static library
-  set(CMAKE_${lang}_CREATE_STATIC_LIBRARY
-    "tlib ${CMAKE_START_TEMP_FILE}/p512 <LINK_FLAGS> /a <TARGET_QUOTED> <OBJECTS>${CMAKE_END_TEMP_FILE}"
-    )
-
-  # Initial configuration flags.
-  set(CMAKE_${lang}_FLAGS_INIT "${_tM}")
-  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-Od -v")
-  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-O1 -DNDEBUG")
-  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-O2 -DNDEBUG")
-  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-Od")
-  set(CMAKE_${lang}_STANDARD_LIBRARIES_INIT "import32.lib")
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Windows-GNU.cmake b/share/cmake-3.2/Modules/Platform/Windows-GNU.cmake
deleted file mode 100644
index ffc5657..0000000
--- a/share/cmake-3.2/Modules/Platform/Windows-GNU.cmake
+++ /dev/null
@@ -1,196 +0,0 @@
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__WINDOWS_GNU)
-  return()
-endif()
-set(__WINDOWS_GNU 1)
-
-set(CMAKE_IMPORT_LIBRARY_PREFIX "lib")
-set(CMAKE_SHARED_LIBRARY_PREFIX "lib")
-set(CMAKE_SHARED_MODULE_PREFIX  "lib")
-set(CMAKE_STATIC_LIBRARY_PREFIX "lib")
-
-set(CMAKE_EXECUTABLE_SUFFIX     ".exe")
-set(CMAKE_IMPORT_LIBRARY_SUFFIX ".dll.a")
-set(CMAKE_SHARED_LIBRARY_SUFFIX ".dll")
-set(CMAKE_SHARED_MODULE_SUFFIX  ".dll")
-set(CMAKE_STATIC_LIBRARY_SUFFIX ".a")
-
-if(MSYS OR MINGW)
-  set(CMAKE_EXTRA_LINK_EXTENSIONS ".lib") # MinGW can also link to a MS .lib
-endif()
-
-if(MINGW)
-  set(CMAKE_FIND_LIBRARY_PREFIXES "lib" "")
-  set(CMAKE_FIND_LIBRARY_SUFFIXES ".dll" ".dll.a" ".a" ".lib")
-  set(CMAKE_C_STANDARD_LIBRARIES_INIT "-lkernel32 -luser32 -lgdi32 -lwinspool -lshell32 -lole32 -loleaut32 -luuid -lcomdlg32 -ladvapi32")
-  set(CMAKE_CXX_STANDARD_LIBRARIES_INIT "${CMAKE_C_STANDARD_LIBRARIES_INIT}")
-endif()
-
-set(CMAKE_DL_LIBS "")
-set(CMAKE_LIBRARY_PATH_FLAG "-L")
-set(CMAKE_LINK_LIBRARY_FLAG "-l")
-set(CMAKE_LINK_DEF_FILE_FLAG "") # Empty string: passing the file is enough
-set(CMAKE_LINK_LIBRARY_SUFFIX "")
-set(CMAKE_CREATE_WIN32_EXE  "-mwindows")
-
-set(CMAKE_GNULD_IMAGE_VERSION
-  "-Wl,--major-image-version,<TARGET_VERSION_MAJOR>,--minor-image-version,<TARGET_VERSION_MINOR>")
-
-# Check if GNU ld is too old to support @FILE syntax.
-set(__WINDOWS_GNU_LD_RESPONSE 1)
-execute_process(COMMAND ld -v OUTPUT_VARIABLE _help ERROR_VARIABLE _help)
-if("${_help}" MATCHES "GNU ld .* 2\\.1[1-6]")
-  set(__WINDOWS_GNU_LD_RESPONSE 0)
-endif()
-
-if(NOT CMAKE_GENERATOR_RC AND CMAKE_GENERATOR MATCHES "Unix Makefiles")
-  set(CMAKE_GENERATOR_RC windres)
-endif()
-
-enable_language(RC)
-
-macro(__windows_compiler_gnu lang)
-
-  if(MSYS OR MINGW)
-    # Create archiving rules to support large object file lists for static libraries.
-    set(CMAKE_${lang}_ARCHIVE_CREATE "<CMAKE_AR> cq <TARGET> <LINK_FLAGS> <OBJECTS>")
-    set(CMAKE_${lang}_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
-    set(CMAKE_${lang}_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
-
-    # Initialize C link type selection flags.  These flags are used when
-    # building a shared library, shared module, or executable that links
-    # to other libraries to select whether to use the static or shared
-    # versions of the libraries.
-    foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
-      set(CMAKE_${type}_LINK_STATIC_${lang}_FLAGS "-Wl,-Bstatic")
-      set(CMAKE_${type}_LINK_DYNAMIC_${lang}_FLAGS "-Wl,-Bdynamic")
-    endforeach()
-  endif()
-
-  # No -fPIC on Windows
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "")
-  set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "")
-  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "")
-
-  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_OBJECTS ${__WINDOWS_GNU_LD_RESPONSE})
-  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_LIBRARIES ${__WINDOWS_GNU_LD_RESPONSE})
-  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_INCLUDES 1)
-
-  # We prefer "@" for response files but it is not supported by gcc 3.
-  execute_process(COMMAND ${CMAKE_${lang}_COMPILER} --version OUTPUT_VARIABLE _ver ERROR_VARIABLE _ver)
-  if("${_ver}" MATCHES "\\(GCC\\) 3\\.")
-    if("${lang}" STREQUAL "Fortran")
-      # The GNU Fortran compiler reports an error:
-      #   no input files; unwilling to write output files
-      # when the response file is passed with "-Wl,@".
-      set(CMAKE_Fortran_USE_RESPONSE_FILE_FOR_OBJECTS 0)
-    else()
-      # Use "-Wl,@" to pass the response file to the linker.
-      set(CMAKE_${lang}_RESPONSE_FILE_LINK_FLAG "-Wl,@")
-    endif()
-    # The GNU 3.x compilers do not support response files (only linkers).
-    set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_INCLUDES 0)
-    # Link libraries are generated only for the front-end.
-    set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_LIBRARIES 0)
-  else()
-    # Use "@" to pass the response file to the front-end.
-    set(CMAKE_${lang}_RESPONSE_FILE_LINK_FLAG "@")
-  endif()
-
-  # Binary link rules.
-  set(CMAKE_${lang}_CREATE_SHARED_MODULE
-    "<CMAKE_${lang}_COMPILER> <CMAKE_SHARED_MODULE_${lang}_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS> -o <TARGET> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
-  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
-    "<CMAKE_${lang}_COMPILER> <CMAKE_SHARED_LIBRARY_${lang}_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS> -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
-  set(CMAKE_${lang}_LINK_EXECUTABLE
-    "<CMAKE_${lang}_COMPILER> <FLAGS> <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <LINK_LIBRARIES>")
-
-  list(APPEND CMAKE_${lang}_ABI_FILES "Platform/Windows-GNU-${lang}-ABI")
-
-  # Support very long lists of object files.
-  # TODO: check for which gcc versions this is still needed, not needed for gcc >= 4.4.
-  # Ninja generator doesn't support this work around.
-  if("${CMAKE_${lang}_RESPONSE_FILE_LINK_FLAG}" STREQUAL "@" AND NOT CMAKE_GENERATOR MATCHES "Ninja")
-    foreach(rule CREATE_SHARED_MODULE CREATE_SHARED_LIBRARY LINK_EXECUTABLE)
-      # The gcc/collect2/ld toolchain does not use response files
-      # internally so we cannot pass long object lists.  Instead pass
-      # the object file list in a response file to the archiver to put
-      # them in a temporary archive.  Hand the archive to the linker.
-      string(REPLACE "<OBJECTS>" "-Wl,--whole-archive <OBJECT_DIR>/objects.a -Wl,--no-whole-archive"
-        CMAKE_${lang}_${rule} "${CMAKE_${lang}_${rule}}")
-      set(CMAKE_${lang}_${rule}
-        "<CMAKE_COMMAND> -E remove -f <OBJECT_DIR>/objects.a"
-        "<CMAKE_AR> cr <OBJECT_DIR>/objects.a <OBJECTS>"
-        "${CMAKE_${lang}_${rule}}"
-        )
-    endforeach()
-  endif()
-endmacro()
-
-macro(__windows_compiler_gnu_abi lang)
-  if(CMAKE_NO_GNUtoMS)
-    set(CMAKE_GNUtoMS 0)
-  else()
-    option(CMAKE_GNUtoMS "Convert GNU import libraries to MS format (requires Visual Studio)" OFF)
-  endif()
-
-  if(CMAKE_GNUtoMS AND NOT CMAKE_GNUtoMS_LIB)
-    # Find MS development environment setup script for this architecture.
-    if("${CMAKE_SIZEOF_VOID_P}" EQUAL 4)
-      find_program(CMAKE_GNUtoMS_VCVARS NAMES vcvars32.bat
-        DOC "Visual Studio vcvars32.bat"
-        PATHS
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\12.0\\Setup\\VC;ProductDir]/bin"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\11.0\\Setup\\VC;ProductDir]/bin"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\10.0\\Setup\\VC;ProductDir]/bin"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\9.0\\Setup\\VC;ProductDir]/bin"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\8.0\\Setup\\VC;ProductDir]/bin"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\7.1\\Setup\\VC;ProductDir]/bin"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\6.0\\Setup\\Microsoft Visual C++;ProductDir]/bin"
-        )
-      set(CMAKE_GNUtoMS_ARCH x86)
-    elseif("${CMAKE_SIZEOF_VOID_P}" EQUAL 8)
-      find_program(CMAKE_GNUtoMS_VCVARS NAMES vcvars64.bat vcvarsamd64.bat
-        DOC "Visual Studio vcvarsamd64.bat"
-        PATHS
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\12.0\\Setup\\VC;ProductDir]/bin/amd64"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\11.0\\Setup\\VC;ProductDir]/bin/amd64"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\10.0\\Setup\\VC;ProductDir]/bin/amd64"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\9.0\\Setup\\VC;ProductDir]/bin/amd64"
-        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\8.0\\Setup\\VC;ProductDir]/bin/amd64"
-        )
-      set(CMAKE_GNUtoMS_ARCH amd64)
-    endif()
-    set_property(CACHE CMAKE_GNUtoMS_VCVARS PROPERTY ADVANCED 1)
-    if(CMAKE_GNUtoMS_VCVARS)
-      # Create helper script to run lib.exe from MS environment.
-      string(REPLACE "/" "\\" CMAKE_GNUtoMS_BAT "${CMAKE_GNUtoMS_VCVARS}")
-      set(CMAKE_GNUtoMS_LIB ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeGNUtoMS_lib.bat)
-      configure_file(${CMAKE_ROOT}/Modules/Platform/GNUtoMS_lib.bat.in ${CMAKE_GNUtoMS_LIB})
-    else()
-      message(WARNING "Disabling CMAKE_GNUtoMS option because CMAKE_GNUtoMS_VCVARS is not set.")
-      set(CMAKE_GNUtoMS 0)
-    endif()
-  endif()
-
-  if(CMAKE_GNUtoMS)
-    # Teach CMake how to create a MS import library at link time.
-    set(CMAKE_${lang}_GNUtoMS_RULE " -Wl,--output-def,<TARGET_NAME>.def"
-      "<CMAKE_COMMAND> -Dlib=\"${CMAKE_GNUtoMS_LIB}\" -Ddef=<TARGET_NAME>.def -Ddll=<TARGET> -Dimp=<TARGET_IMPLIB> -P \"${CMAKE_ROOT}/Modules/Platform/GNUtoMS_lib.cmake\""
-      )
-  endif()
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Intel-Fortran.cmake b/share/cmake-3.2/Modules/Platform/Windows-Intel-Fortran.cmake
deleted file mode 100644
index 40523ff..0000000
--- a/share/cmake-3.2/Modules/Platform/Windows-Intel-Fortran.cmake
+++ /dev/null
@@ -1,11 +0,0 @@
-include(Platform/Windows-Intel)
-set(CMAKE_BUILD_TYPE_INIT Debug)
-set(_COMPILE_Fortran " /fpp")
-set(CMAKE_Fortran_MODDIR_FLAG "-module:")
-set(CMAKE_Fortran_STANDARD_LIBRARIES_INIT "user32.lib")
-__windows_compiler_intel(Fortran)
-set (CMAKE_Fortran_FLAGS_INIT "/W1 /nologo /fpp /libs:dll /threads")
-set (CMAKE_Fortran_FLAGS_DEBUG_INIT "/debug:full /dbglibs")
-set (CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "/O1 /D NDEBUG")
-set (CMAKE_Fortran_FLAGS_RELEASE_INIT "/O2 /D NDEBUG")
-set (CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "/O2 /debug:full /D NDEBUG")
diff --git a/share/cmake-3.2/Modules/Platform/Windows-MSVC.cmake b/share/cmake-3.2/Modules/Platform/Windows-MSVC.cmake
deleted file mode 100644
index 2440f89..0000000
--- a/share/cmake-3.2/Modules/Platform/Windows-MSVC.cmake
+++ /dev/null
@@ -1,277 +0,0 @@
-
-#=============================================================================
-# Copyright 2001-2012 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This module is shared by multiple languages; use include blocker.
-if(__WINDOWS_MSVC)
-  return()
-endif()
-set(__WINDOWS_MSVC 1)
-
-set(CMAKE_LIBRARY_PATH_FLAG "-LIBPATH:")
-set(CMAKE_LINK_LIBRARY_FLAG "")
-set(MSVC 1)
-
-# hack: if a new cmake (which uses CMAKE_LINKER) runs on an old build tree
-# (where link was hardcoded) and where CMAKE_LINKER isn't in the cache
-# and still cmake didn't fail in CMakeFindBinUtils.cmake (because it isn't rerun)
-# hardcode CMAKE_LINKER here to link, so it behaves as it did before, Alex
-if(NOT DEFINED CMAKE_LINKER)
-   set(CMAKE_LINKER link)
-endif()
-
-if(CMAKE_VERBOSE_MAKEFILE)
-  set(CMAKE_CL_NOLOGO)
-else()
-  set(CMAKE_CL_NOLOGO "/nologo")
-endif()
-
-if(CMAKE_SYSTEM_NAME STREQUAL "WindowsCE")
-  set(CMAKE_CREATE_WIN32_EXE "/entry:WinMainCRTStartup")
-  set(CMAKE_CREATE_CONSOLE_EXE "/entry:mainACRTStartup")
-  set(_PLATFORM_LINK_FLAGS " /subsystem:windowsce")
-else()
-  set(CMAKE_CREATE_WIN32_EXE "/subsystem:windows")
-  set(CMAKE_CREATE_CONSOLE_EXE "/subsystem:console")
-  set(_PLATFORM_LINK_FLAGS "")
-endif()
-
-if(CMAKE_GENERATOR MATCHES "Visual Studio 6")
-   set (CMAKE_NO_BUILD_TYPE 1)
-endif()
-if(NOT CMAKE_NO_BUILD_TYPE AND CMAKE_GENERATOR MATCHES "Visual Studio")
-  set (CMAKE_NO_BUILD_TYPE 1)
-endif()
-
-# make sure to enable languages after setting configuration types
-enable_language(RC)
-set(CMAKE_COMPILE_RESOURCE "rc <FLAGS> /fo<OBJECT> <SOURCE>")
-
-if("${CMAKE_GENERATOR}" MATCHES "Visual Studio")
-  set(MSVC_IDE 1)
-else()
-  set(MSVC_IDE 0)
-endif()
-
-if(NOT MSVC_VERSION)
-  if(CMAKE_C_SIMULATE_VERSION)
-    set(_compiler_version ${CMAKE_C_SIMULATE_VERSION})
-  elseif(CMAKE_CXX_SIMULATE_VERSION)
-    set(_compiler_version ${CMAKE_CXX_SIMULATE_VERSION})
-  elseif(CMAKE_Fortran_SIMULATE_VERSION)
-    set(_compiler_version ${CMAKE_Fortran_SIMULATE_VERSION})
-  elseif(CMAKE_C_COMPILER_VERSION)
-    set(_compiler_version ${CMAKE_C_COMPILER_VERSION})
-  else()
-    set(_compiler_version ${CMAKE_CXX_COMPILER_VERSION})
-  endif()
-  if("${_compiler_version}" MATCHES "^([0-9]+)\\.([0-9]+)")
-    math(EXPR MSVC_VERSION "${CMAKE_MATCH_1}*100 + ${CMAKE_MATCH_2}")
-  else()
-    message(FATAL_ERROR "MSVC compiler version not detected properly: ${_compiler_version}")
-  endif()
-
-  set(MSVC10)
-  set(MSVC11)
-  set(MSVC12)
-  set(MSVC14)
-  set(MSVC60)
-  set(MSVC70)
-  set(MSVC71)
-  set(MSVC80)
-  set(MSVC90)
-  set(CMAKE_COMPILER_2005)
-  set(CMAKE_COMPILER_SUPPORTS_PDBTYPE)
-  if(NOT "${_compiler_version}" VERSION_LESS 19)
-    set(MSVC14 1)
-  elseif(NOT "${_compiler_version}" VERSION_LESS 18)
-    set(MSVC12 1)
-  elseif(NOT "${_compiler_version}" VERSION_LESS 17)
-    set(MSVC11 1)
-  elseif(NOT  "${_compiler_version}" VERSION_LESS 16)
-    set(MSVC10 1)
-  elseif(NOT  "${_compiler_version}" VERSION_LESS 15)
-    set(MSVC90 1)
-  elseif(NOT  "${_compiler_version}" VERSION_LESS 14)
-    set(MSVC80 1)
-    set(CMAKE_COMPILER_2005 1)
-  elseif(NOT  "${_compiler_version}" VERSION_LESS 13.10)
-    set(MSVC71 1)
-  elseif(NOT  "${_compiler_version}" VERSION_LESS 13)
-    set(MSVC70 1)
-  else()
-    set(MSVC60 1)
-    set(CMAKE_COMPILER_SUPPORTS_PDBTYPE 1)
-  endif()
-endif()
-
-if(MSVC_C_ARCHITECTURE_ID MATCHES 64 OR MSVC_CXX_ARCHITECTURE_ID MATCHES 64)
-  set(CMAKE_CL_64 1)
-else()
-  set(CMAKE_CL_64 0)
-endif()
-if(CMAKE_FORCE_WIN64 OR CMAKE_FORCE_IA64)
-  set(CMAKE_CL_64 1)
-endif()
-
-if("${MSVC_VERSION}" GREATER 1599)
-  set(MSVC_INCREMENTAL_DEFAULT ON)
-endif()
-
-# default to Debug builds
-set(CMAKE_BUILD_TYPE_INIT Debug)
-
-if(WINCE)
-  foreach(lang C CXX)
-    set(_MSVC_${lang}_ARCHITECTURE_FAMILY "${MSVC_${lang}_ARCHITECTURE_ID}")
-    if(_MSVC_${lang}_ARCHITECTURE_FAMILY STREQUAL "THUMB")
-      set(_MSVC_${lang}_ARCHITECTURE_FAMILY "ARM")
-    elseif(_MSVC_${lang}_ARCHITECTURE_FAMILY MATCHES "^SH")
-      set(_MSVC_${lang}_ARCHITECTURE_FAMILY "SHx")
-    endif()
-    string(TOUPPER "${_MSVC_${lang}_ARCHITECTURE_FAMILY}" _MSVC_${lang}_ARCHITECTURE_FAMILY_UPPER)
-  endforeach()
-
-  if("${CMAKE_SYSTEM_VERSION}" MATCHES "^([0-9]+)\\.([0-9]+)")
-    math(EXPR _CE_VERSION "${CMAKE_MATCH_1}*100 + ${CMAKE_MATCH_2}")
-  elseif("${CMAKE_SYSTEM_VERSION}" STREQUAL "")
-    set(_CE_VERSION "500")
-  else()
-    message(FATAL_ERROR "Invalid Windows CE version: ${CMAKE_SYSTEM_VERSION}")
-  endif()
-
-  set(_PLATFORM_DEFINES "/D_WIN32_WCE=0x${_CE_VERSION} /DUNDER_CE")
-  set(_PLATFORM_DEFINES_C " /D${_MSVC_C_ARCHITECTURE_FAMILY} /D_${_MSVC_C_ARCHITECTURE_FAMILY_UPPER}_")
-  set(_PLATFORM_DEFINES_CXX " /D${_MSVC_CXX_ARCHITECTURE_FAMILY} /D_${_MSVC_CXX_ARCHITECTURE_FAMILY_UPPER}_")
-
-  set(_RTC1 "")
-  set(_FLAGS_CXX " /GR /EHsc")
-  set(CMAKE_C_STANDARD_LIBRARIES_INIT "coredll.lib ole32.lib oleaut32.lib uuid.lib commctrl.lib")
-  set(CMAKE_EXE_LINKER_FLAGS_INIT "${CMAKE_EXE_LINKER_FLAGS_INIT} /NODEFAULTLIB:libc.lib /NODEFAULTLIB:oldnames.lib")
-
-  if (MSVC_VERSION LESS 1600)
-    set(CMAKE_C_STANDARD_LIBRARIES_INIT "${CMAKE_C_STANDARD_LIBRARIES_INIT} corelibc.lib")
-  endif ()
-elseif(WINDOWS_PHONE OR WINDOWS_STORE)
-  set(_PLATFORM_DEFINES "/DWIN32")
-  set(_FLAGS_C " /DUNICODE /D_UNICODE")
-  set(_FLAGS_CXX " /DUNICODE /D_UNICODE /GR /EHsc")
-  if(WINDOWS_PHONE)
-    set(CMAKE_C_STANDARD_LIBRARIES_INIT "WindowsPhoneCore.lib RuntimeObject.lib PhoneAppModelHost.lib")
-  elseif(MSVC_C_ARCHITECTURE_ID STREQUAL ARM OR MSVC_CXX_ARCHITECTURE_ID STREQUAL ARM)
-    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib")
-  else()
-    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib")
-  endif()
-else()
-  set(_PLATFORM_DEFINES "/DWIN32")
-
-  if(MSVC_C_ARCHITECTURE_ID STREQUAL ARM OR MSVC_CXX_ARCHITECTURE_ID STREQUAL ARM)
-    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib")
-  elseif(MSVC_VERSION GREATER 1310)
-    set(_RTC1 "/RTC1")
-    set(_FLAGS_CXX " /GR /EHsc")
-    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib gdi32.lib winspool.lib shell32.lib ole32.lib oleaut32.lib uuid.lib comdlg32.lib advapi32.lib")
-  else()
-    set(_RTC1 "/GZ")
-    set(_FLAGS_CXX " /GR /GX")
-    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib")
-  endif()
-
-  if(MSVC_VERSION LESS 1310)
-    set(_FLAGS_C   " /Zm1000${_FLAGS_C}")
-    set(_FLAGS_CXX " /Zm1000${_FLAGS_CXX}")
-  endif()
-endif()
-
-set(CMAKE_CXX_STANDARD_LIBRARIES_INIT "${CMAKE_C_STANDARD_LIBRARIES_INIT}")
-
-# executable linker flags
-set (CMAKE_LINK_DEF_FILE_FLAG "/DEF:")
-# set the machine type
-if(MSVC_C_ARCHITECTURE_ID)
-  set(_MACHINE_ARCH_FLAG "/machine:${MSVC_C_ARCHITECTURE_ID}")
-elseif(MSVC_CXX_ARCHITECTURE_ID)
-  set(_MACHINE_ARCH_FLAG "/machine:${MSVC_CXX_ARCHITECTURE_ID}")
-elseif(MSVC_Fortran_ARCHITECTURE_ID)
-  set(_MACHINE_ARCH_FLAG "/machine:${MSVC_Fortran_ARCHITECTURE_ID}")
-endif()
-set(CMAKE_EXE_LINKER_FLAGS_INIT "${CMAKE_EXE_LINKER_FLAGS_INIT} ${_MACHINE_ARCH_FLAG}")
-unset(_MACHINE_ARCH_FLAG)
-
-# add /debug and /INCREMENTAL:YES to DEBUG and RELWITHDEBINFO also add pdbtype
-# on versions that support it
-set( MSVC_INCREMENTAL_YES_FLAG "")
-if(NOT WINDOWS_PHONE AND NOT WINDOWS_STORE)
-  if(NOT MSVC_INCREMENTAL_DEFAULT)
-    set( MSVC_INCREMENTAL_YES_FLAG "/INCREMENTAL:YES")
-  else()
-    set(  MSVC_INCREMENTAL_YES_FLAG "/INCREMENTAL" )
-  endif()
-endif()
-
-if (CMAKE_COMPILER_SUPPORTS_PDBTYPE)
-  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug /pdbtype:sept ${MSVC_INCREMENTAL_YES_FLAG}")
-  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug /pdbtype:sept ${MSVC_INCREMENTAL_YES_FLAG}")
-else ()
-  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug ${MSVC_INCREMENTAL_YES_FLAG}")
-  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug ${MSVC_INCREMENTAL_YES_FLAG}")
-endif ()
-# for release and minsize release default to no incremental linking
-set(CMAKE_EXE_LINKER_FLAGS_MINSIZEREL_INIT "/INCREMENTAL:NO")
-set(CMAKE_EXE_LINKER_FLAGS_RELEASE_INIT "/INCREMENTAL:NO")
-
-# copy the EXE_LINKER flags to SHARED and MODULE linker flags
-# shared linker flags
-set (CMAKE_SHARED_LINKER_FLAGS_INIT ${CMAKE_EXE_LINKER_FLAGS_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT ${CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_RELEASE_INIT ${CMAKE_EXE_LINKER_FLAGS_RELEASE_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL_INIT ${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL_INIT})
-# module linker flags
-set (CMAKE_MODULE_LINKER_FLAGS_INIT ${CMAKE_SHARED_LINKER_FLAGS_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_DEBUG_INIT ${CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_RELEASE_INIT ${CMAKE_EXE_LINKER_FLAGS_RELEASE_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL_INIT ${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL_INIT})
-
-macro(__windows_compiler_msvc lang)
-  if(NOT MSVC_VERSION LESS 1400)
-    # for 2005 make sure the manifest is put in the dll with mt
-    set(_CMAKE_VS_LINK_DLL "<CMAKE_COMMAND> -E vs_link_dll ")
-    set(_CMAKE_VS_LINK_EXE "<CMAKE_COMMAND> -E vs_link_exe ")
-  endif()
-  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
-    "${_CMAKE_VS_LINK_DLL}<CMAKE_LINKER> ${CMAKE_CL_NOLOGO} <OBJECTS> ${CMAKE_START_TEMP_FILE} /out:<TARGET> /implib:<TARGET_IMPLIB> /pdb:<TARGET_PDB> /dll /version:<TARGET_VERSION_MAJOR>.<TARGET_VERSION_MINOR>${_PLATFORM_LINK_FLAGS} <LINK_FLAGS> <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
-
-  set(CMAKE_${lang}_CREATE_SHARED_MODULE ${CMAKE_${lang}_CREATE_SHARED_LIBRARY})
-  set(CMAKE_${lang}_CREATE_STATIC_LIBRARY  "<CMAKE_LINKER> /lib ${CMAKE_CL_NOLOGO} <LINK_FLAGS> /out:<TARGET> <OBJECTS> ")
-
-  set(CMAKE_${lang}_COMPILE_OBJECT
-    "<CMAKE_${lang}_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO}${_COMPILE_${lang}} <FLAGS> <DEFINES> /Fo<OBJECT> /Fd<TARGET_COMPILE_PDB>${_FS_${lang}} -c <SOURCE>${CMAKE_END_TEMP_FILE}")
-  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE
-    "<CMAKE_${lang}_COMPILER> > <PREPROCESSED_SOURCE> ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO}${_COMPILE_${lang}} <FLAGS> <DEFINES> -E <SOURCE>${CMAKE_END_TEMP_FILE}")
-  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE
-    "<CMAKE_${lang}_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO}${_COMPILE_${lang}} <FLAGS> <DEFINES> /FoNUL /FAs /Fa<ASSEMBLY_SOURCE> /c <SOURCE>${CMAKE_END_TEMP_FILE}")
-
-  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_OBJECTS 1)
-  set(CMAKE_${lang}_LINK_EXECUTABLE
-    "${_CMAKE_VS_LINK_EXE}<CMAKE_LINKER> ${CMAKE_CL_NOLOGO} <OBJECTS> ${CMAKE_START_TEMP_FILE} /out:<TARGET> /implib:<TARGET_IMPLIB> /pdb:<TARGET_PDB> /version:<TARGET_VERSION_MAJOR>.<TARGET_VERSION_MINOR>${_PLATFORM_LINK_FLAGS} <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>${CMAKE_END_TEMP_FILE}")
-
-  set(CMAKE_${lang}_FLAGS_INIT "${_PLATFORM_DEFINES}${_PLATFORM_DEFINES_${lang}} /D_WINDOWS /W3${_FLAGS_${lang}}")
-  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "/D_DEBUG /MDd /Zi /Ob0 /Od ${_RTC1}")
-  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "/MD /O2 /Ob2 /D NDEBUG")
-  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "/MD /Zi /O2 /Ob1 /D NDEBUG")
-  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "/MD /O1 /Ob1 /D NDEBUG")
-  set(CMAKE_${lang}_LINKER_SUPPORTS_PDB ON)
-endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Windows-df.cmake b/share/cmake-3.2/Modules/Platform/Windows-df.cmake
deleted file mode 100644
index 59d88a3..0000000
--- a/share/cmake-3.2/Modules/Platform/Windows-df.cmake
+++ /dev/null
@@ -1,68 +0,0 @@
-# compiler support for fortran CVF compiler on windows
-
-set(CMAKE_WINDOWS_OBJECT_PATH 1)
-set(CMAKE_LIBRARY_PATH_FLAG "-LIBPATH:")
-set(CMAKE_LINK_LIBRARY_FLAG "")
-set(WIN32 1)
-if(CMAKE_VERBOSE_MAKEFILE)
-  set(CMAKE_CL_NOLOGO)
-else()
-  set(CMAKE_CL_NOLOGO "/nologo")
-endif()
-
-set(CMAKE_Fortran_MODDIR_FLAG "-module:")
-
-set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
- "link ${CMAKE_CL_NOLOGO} ${CMAKE_START_TEMP_FILE}  /out:<TARGET> /dll  <LINK_FLAGS> <OBJECTS> <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
-
-set(CMAKE_Fortran_CREATE_SHARED_MODULE ${CMAKE_Fortran_CREATE_SHARED_LIBRARY})
-
-# create a C++ static library
-set(CMAKE_Fortran_CREATE_STATIC_LIBRARY  "lib ${CMAKE_CL_NOLOGO} <LINK_FLAGS> /out:<TARGET> <OBJECTS> ")
-
-# compile a C++ file into an object file
-set(CMAKE_Fortran_COMPILE_OBJECT
-    "<CMAKE_Fortran_COMPILER>  ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO} /object:<OBJECT> <FLAGS> /compile_only <SOURCE>${CMAKE_END_TEMP_FILE}")
-
-set(CMAKE_COMPILE_RESOURCE "rc <FLAGS> /fo<OBJECT> <SOURCE>")
-
-set(CMAKE_Fortran_LINK_EXECUTABLE
-    "<CMAKE_Fortran_COMPILER> ${CMAKE_CL_NOLOGO} ${CMAKE_START_TEMP_FILE} <FLAGS> /exe:<TARGET> <OBJECTS> /link <CMAKE_Fortran_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>${CMAKE_END_TEMP_FILE}")
-
-set(CMAKE_CREATE_WIN32_EXE /winapp)
-set(CMAKE_CREATE_CONSOLE_EXE )
-
-if(CMAKE_GENERATOR MATCHES "Visual Studio 6")
-   set (CMAKE_NO_BUILD_TYPE 1)
-endif()
-if(CMAKE_GENERATOR MATCHES "Visual Studio 7" OR CMAKE_GENERATOR MATCHES "Visual Studio 8")
-  set (CMAKE_NO_BUILD_TYPE 1)
-endif()
-# does the compiler support pdbtype and is it the newer compiler
-
-set(CMAKE_BUILD_TYPE_INIT Debug)
-set (CMAKE_Fortran_FLAGS_INIT "")
-set (CMAKE_Fortran_FLAGS_DEBUG_INIT "/debug:full")
-set (CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "/Optimize:2 /Define:NDEBUG")
-set (CMAKE_Fortran_FLAGS_RELEASE_INIT "/Optimize:1 /Define:NDEBUG")
-set (CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "/Optimize:1 /debug:full /Define:NDEBUG")
-
-set (CMAKE_Fortran_STANDARD_LIBRARIES_INIT "user32.lib")
-
-# executable linker flags
-set (CMAKE_LINK_DEF_FILE_FLAG "/DEF:")
-set (CMAKE_EXE_LINKER_FLAGS_INIT " /INCREMENTAL:YES")
-if (CMAKE_COMPILER_SUPPORTS_PDBTYPE)
-  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug /pdbtype:sept")
-  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug /pdbtype:sept")
-else ()
-  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug")
-  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug")
-endif ()
-
-set (CMAKE_SHARED_LINKER_FLAGS_INIT ${CMAKE_EXE_LINKER_FLAGS_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT ${CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT})
-set (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_INIT ${CMAKE_SHARED_LINKER_FLAGS_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_DEBUG_INIT ${CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT})
-set (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
diff --git a/share/cmake-3.2/Modules/Platform/Windows-wcl386.cmake b/share/cmake-3.2/Modules/Platform/Windows-wcl386.cmake
deleted file mode 100644
index 88f9bf7..0000000
--- a/share/cmake-3.2/Modules/Platform/Windows-wcl386.cmake
+++ /dev/null
@@ -1,119 +0,0 @@
-set(CMAKE_LIBRARY_PATH_FLAG "libpath ")
-set(CMAKE_LINK_LIBRARY_FLAG "library ")
-set(CMAKE_LINK_LIBRARY_FILE_FLAG "library")
-
-if(CMAKE_VERBOSE_MAKEFILE)
-  set(CMAKE_WCL_QUIET)
-  set(CMAKE_WLINK_QUIET)
-  set(CMAKE_LIB_QUIET)
-else()
-  set(CMAKE_WCL_QUIET "-zq")
-  set(CMAKE_WLINK_QUIET "option quiet")
-  set(CMAKE_LIB_QUIET "-q")
-endif()
-
-set(CMAKE_EXE_LINKER_FLAGS_INIT)
-set(CMAKE_CREATE_WIN32_EXE "system nt_win" )
-set(CMAKE_CREATE_CONSOLE_EXE "system nt" )
-set(CMAKE_SHARED_LINKER_FLAGS_INIT "system nt_dll")
-set(CMAKE_MODULE_LINKER_FLAGS_INIT "system nt_dll")
-foreach(type SHARED MODULE EXE)
-  set(CMAKE_${type}_LINKER_FLAGS_DEBUG_INIT "debug all opt map")
-  set(CMAKE_${type}_LINKER_FLAGS_RELWITHDEBINFO_INIT "debug all opt map")
-endforeach()
-
-set(CMAKE_C_COMPILE_OPTIONS_DLL "-bd") # Note: This variable is a ';' separated list
-set(CMAKE_SHARED_LIBRARY_C_FLAGS "-bd") # ... while this is a space separated string.
-
-set(CMAKE_RC_COMPILER "rc" )
-
-set(CMAKE_BUILD_TYPE_INIT Debug)
-
-# single/multi-threaded                 /-bm
-# static/DLL run-time libraries         /-br
-# default is setup for multi-threaded + DLL run-time libraries
-set (CMAKE_C_FLAGS_INIT "-bt=nt -w3 -dWIN32 -br -bm")
-set (CMAKE_CXX_FLAGS_INIT "-bt=nt -xs -w3 -dWIN32 -br -bm")
-foreach(lang C CXX)
-  set (CMAKE_${lang}_FLAGS_DEBUG_INIT "-d2")
-  set (CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-s -os -d0 -dNDEBUG")
-  set (CMAKE_${lang}_FLAGS_RELEASE_INIT "-s -ot -d0 -dNDEBUG")
-  set (CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-s -ot -d1 -dNDEBUG")
-endforeach()
-
-foreach(type CREATE_SHARED_LIBRARY CREATE_SHARED_MODULE LINK_EXECUTABLE)
-  set(CMAKE_C_${type}_USE_WATCOM_QUOTE 1)
-  set(CMAKE_CXX_${type}_USE_WATCOM_QUOTE 1)
-endforeach()
-
-set(CMAKE_C_CREATE_IMPORT_LIBRARY
-  "wlib -c -q -n -b <TARGET_IMPLIB> +<TARGET_QUOTED>")
-set(CMAKE_CXX_CREATE_IMPORT_LIBRARY ${CMAKE_C_CREATE_IMPORT_LIBRARY})
-
-set(CMAKE_C_LINK_EXECUTABLE
-    "wlink ${CMAKE_START_TEMP_FILE} ${CMAKE_WLINK_QUIET} name <TARGET> <LINK_FLAGS> file {<OBJECTS>} <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
-
-
-set(CMAKE_CXX_LINK_EXECUTABLE ${CMAKE_C_LINK_EXECUTABLE})
-
-# compile a C++ file into an object file
-set(CMAKE_CXX_COMPILE_OBJECT
-    "<CMAKE_CXX_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} <FLAGS> -d+ <DEFINES> -fo<OBJECT> -c -cc++ <SOURCE>${CMAKE_END_TEMP_FILE}")
-
-# compile a C file into an object file
-set(CMAKE_C_COMPILE_OBJECT
-    "<CMAKE_C_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} <FLAGS> -d+ <DEFINES> -fo<OBJECT> -c -cc <SOURCE>${CMAKE_END_TEMP_FILE}")
-
-# preprocess a C source file
-set(CMAKE_C_CREATE_PREPROCESSED_SOURCE
-    "<CMAKE_C_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} <FLAGS> -d+ <DEFINES> -fo<PREPROCESSED_SOURCE> -pl -cc <SOURCE>${CMAKE_END_TEMP_FILE}")
-
-# preprocess a C++ source file
-set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE
-    "<CMAKE_CXX_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} <FLAGS> -d+ <DEFINES> -fo<PREPROCESSED_SOURCE> -pl -cc++ <SOURCE>${CMAKE_END_TEMP_FILE}")
-
-set(CMAKE_CXX_CREATE_SHARED_LIBRARY
- "wlink ${CMAKE_START_TEMP_FILE} ${CMAKE_WLINK_QUIET} name <TARGET> <LINK_FLAGS> option implib=<TARGET_IMPLIB> file {<OBJECTS>} <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
-string(REPLACE " option implib=<TARGET_IMPLIB>" ""
-  CMAKE_CXX_CREATE_SHARED_MODULE "${CMAKE_CXX_CREATE_SHARED_LIBRARY}")
-
-# create a C shared library
-set(CMAKE_C_CREATE_SHARED_LIBRARY ${CMAKE_CXX_CREATE_SHARED_LIBRARY})
-
-# create a C shared module
-set(CMAKE_C_CREATE_SHARED_MODULE ${CMAKE_CXX_CREATE_SHARED_MODULE})
-
-# create a C++ static library
-set(CMAKE_CXX_CREATE_STATIC_LIBRARY  "wlib ${CMAKE_LIB_QUIET} -c -n -b <TARGET_QUOTED> <LINK_FLAGS> <OBJECTS> ")
-
-# create a C static library
-set(CMAKE_C_CREATE_STATIC_LIBRARY ${CMAKE_CXX_CREATE_STATIC_LIBRARY})
-
-if(NOT _CMAKE_WATCOM_VERSION)
-  set(_CMAKE_WATCOM_VERSION 1)
-  if(CMAKE_C_COMPILER_VERSION)
-    set(_compiler_version ${CMAKE_C_COMPILER_VERSION})
-    set(_compiler_id ${CMAKE_C_COMPILER_ID})
-  else()
-    set(_compiler_version ${CMAKE_CXX_COMPILER_VERSION})
-    set(_compiler_id ${CMAKE_CXX_COMPILER_ID})
-  endif()
-  set(WATCOM16)
-  set(WATCOM17)
-  set(WATCOM18)
-  set(WATCOM19)
-  if("${_compiler_id}" STREQUAL "OpenWatcom")
-    if("${_compiler_version}" VERSION_LESS 1.7)
-      set(WATCOM16 1)
-    endif()
-    if("${_compiler_version}" VERSION_EQUAL 1.7)
-      set(WATCOM17 1)
-    endif()
-    if("${_compiler_version}" VERSION_EQUAL 1.8)
-      set(WATCOM18 1)
-    endif()
-    if("${_compiler_version}" VERSION_EQUAL 1.9)
-      set(WATCOM19 1)
-    endif()
-  endif()
-endif()
diff --git a/share/cmake-3.2/Modules/Platform/Windows-windres.cmake b/share/cmake-3.2/Modules/Platform/Windows-windres.cmake
deleted file mode 100644
index 01d6be3..0000000
--- a/share/cmake-3.2/Modules/Platform/Windows-windres.cmake
+++ /dev/null
@@ -1 +0,0 @@
-set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <FLAGS> <DEFINES> <SOURCE> <OBJECT>")
diff --git a/share/cmake-3.2/Modules/Platform/WindowsPaths.cmake b/share/cmake-3.2/Modules/Platform/WindowsPaths.cmake
deleted file mode 100644
index 658de3b..0000000
--- a/share/cmake-3.2/Modules/Platform/WindowsPaths.cmake
+++ /dev/null
@@ -1,116 +0,0 @@
-
-#=============================================================================
-# Copyright 2006-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Block multiple inclusion because "CMakeCInformation.cmake" includes
-# "Platform/${CMAKE_SYSTEM_NAME}" even though the generic module
-# "CMakeSystemSpecificInformation.cmake" already included it.
-# The extra inclusion is a work-around documented next to the include()
-# call, so this can be removed when the work-around is removed.
-if(__WINDOWS_PATHS_INCLUDED)
-  return()
-endif()
-set(__WINDOWS_PATHS_INCLUDED 1)
-
-# Add the program-files folder(s) to the list of installation
-# prefixes.
-#
-# Windows 64-bit Binary:
-#   ENV{ProgramFiles(x86)} = [C:\Program Files (x86)]
-#   ENV{ProgramFiles} = [C:\Program Files]
-#   ENV{ProgramW6432} = <not set>
-# (executed from cygwin):
-#   ENV{ProgramFiles(x86)} = <not set>
-#   ENV{ProgramFiles} = [C:\Program Files]
-#   ENV{ProgramW6432} = <not set>
-#
-# Windows 32-bit Binary:
-#   ENV{ProgramFiles(x86)} = [C:\Program Files (x86)]
-#   ENV{ProgramFiles} = [C:\Program Files (x86)]
-#   ENV{ProgramW6432} = [C:\Program Files]
-# (executed from cygwin):
-#   ENV{ProgramFiles(x86)} = <not set>
-#   ENV{ProgramFiles} = [C:\Program Files (x86)]
-#   ENV{ProgramW6432} = [C:\Program Files]
-if(DEFINED "ENV{ProgramW6432}")
-  # 32-bit binary on 64-bit windows.
-  # The 64-bit program files are in ProgramW6432.
-  list(APPEND CMAKE_SYSTEM_PREFIX_PATH "$ENV{ProgramW6432}")
-
-  # The 32-bit program files are in ProgramFiles.
-  if(DEFINED "ENV{ProgramFiles}")
-    list(APPEND CMAKE_SYSTEM_PREFIX_PATH "$ENV{ProgramFiles}")
-  endif()
-else()
-  # 64-bit binary, or 32-bit binary on 32-bit windows.
-  if(DEFINED "ENV{ProgramFiles}")
-    list(APPEND CMAKE_SYSTEM_PREFIX_PATH "$ENV{ProgramFiles}")
-  endif()
-  set(programfilesx86 "ProgramFiles(x86)")
-  if(DEFINED "ENV{${programfilesx86}}")
-    # 64-bit binary.  32-bit program files are in ProgramFiles(x86).
-    list(APPEND CMAKE_SYSTEM_PREFIX_PATH "$ENV{${programfilesx86}}")
-  elseif(DEFINED "ENV{SystemDrive}")
-    # Guess the 32-bit program files location.
-    if(EXISTS "$ENV{SystemDrive}/Program Files (x86)")
-      list(APPEND CMAKE_SYSTEM_PREFIX_PATH
-        "$ENV{SystemDrive}/Program Files (x86)")
-    endif()
-  endif()
-endif()
-
-# Add the CMake install location.
-get_filename_component(_CMAKE_INSTALL_DIR "${CMAKE_ROOT}" PATH)
-get_filename_component(_CMAKE_INSTALL_DIR "${_CMAKE_INSTALL_DIR}" PATH)
-list(APPEND CMAKE_SYSTEM_PREFIX_PATH "${_CMAKE_INSTALL_DIR}")
-
-if (NOT CMAKE_FIND_NO_INSTALL_PREFIX)
-  # Add other locations.
-  list(APPEND CMAKE_SYSTEM_PREFIX_PATH
-    # Project install destination.
-    "${CMAKE_INSTALL_PREFIX}"
-    )
-  if (CMAKE_STAGING_PREFIX)
-    list(APPEND CMAKE_SYSTEM_PREFIX_PATH
-      # User-supplied staging prefix.
-      "${CMAKE_STAGING_PREFIX}"
-    )
-  endif()
-endif()
-
-if(CMAKE_CROSSCOMPILING AND NOT CMAKE_HOST_SYSTEM_NAME MATCHES "Windows")
-  # MinGW (useful when cross compiling from linux with CMAKE_FIND_ROOT_PATH set)
-  list(APPEND CMAKE_SYSTEM_PREFIX_PATH /)
-endif()
-
-list(APPEND CMAKE_SYSTEM_INCLUDE_PATH
-  )
-
-# mingw can also link against dlls which can also be in /bin, so list this too
-if (NOT CMAKE_FIND_NO_INSTALL_PREFIX)
-  list(APPEND CMAKE_SYSTEM_LIBRARY_PATH
-    "${CMAKE_INSTALL_PREFIX}/bin"
-  )
-  if (CMAKE_STAGING_PREFIX)
-    list(APPEND CMAKE_SYSTEM_LIBRARY_PATH
-      "${CMAKE_STAGING_PREFIX}/bin"
-    )
-  endif()
-endif()
-list(APPEND CMAKE_SYSTEM_LIBRARY_PATH
-  "${_CMAKE_INSTALL_DIR}/bin"
-  /bin
-  )
-
-list(APPEND CMAKE_SYSTEM_PROGRAM_PATH
-  )
diff --git a/share/cmake-3.2/Modules/Platform/gas.cmake b/share/cmake-3.2/Modules/Platform/gas.cmake
deleted file mode 100644
index 7d2bc84..0000000
--- a/share/cmake-3.2/Modules/Platform/gas.cmake
+++ /dev/null
@@ -1,19 +0,0 @@
-if(UNIX)
-  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .o)
-else()
-  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .obj)
-endif()
-
-set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <FLAGS> -o <OBJECT> <SOURCE>")
-
-set(CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY
-      "<CMAKE_AR> cr <TARGET> <LINK_FLAGS> <OBJECTS> "
-      "<CMAKE_RANLIB> <TARGET> ")
-
-set(CMAKE_ASM${ASM_DIALECT}_LINK_EXECUTABLE
-    "<CMAKE_LINKER> <FLAGS> <CMAKE_ASM${ASM_DIALECT}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
-
-# to be done
-set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_LIBRARY)
-set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_MODULE)
-
diff --git a/share/cmake-3.2/Modules/ProcessorCount.cmake b/share/cmake-3.2/Modules/ProcessorCount.cmake
deleted file mode 100644
index 8f21adf..0000000
--- a/share/cmake-3.2/Modules/ProcessorCount.cmake
+++ /dev/null
@@ -1,231 +0,0 @@
-#.rst:
-# ProcessorCount
-# --------------
-#
-# ProcessorCount(var)
-#
-# Determine the number of processors/cores and save value in ${var}
-#
-# Sets the variable named ${var} to the number of physical cores
-# available on the machine if the information can be determined.
-# Otherwise it is set to 0.  Currently this functionality is implemented
-# for AIX, cygwin, FreeBSD, HPUX, IRIX, Linux, Mac OS X, QNX, Sun and
-# Windows.
-#
-# This function is guaranteed to return a positive integer (>=1) if it
-# succeeds.  It returns 0 if there's a problem determining the processor
-# count.
-#
-# Example use, in a ctest -S dashboard script:
-#
-# ::
-#
-#    include(ProcessorCount)
-#    ProcessorCount(N)
-#    if(NOT N EQUAL 0)
-#      set(CTEST_BUILD_FLAGS -j${N})
-#      set(ctest_test_args ${ctest_test_args} PARALLEL_LEVEL ${N})
-#    endif()
-#
-#
-#
-# This function is intended to offer an approximation of the value of
-# the number of compute cores available on the current machine, such
-# that you may use that value for parallel building and parallel
-# testing.  It is meant to help utilize as much of the machine as seems
-# reasonable.  Of course, knowledge of what else might be running on the
-# machine simultaneously should be used when deciding whether to request
-# a machine's full capacity all for yourself.
-
-# A more reliable way might be to compile a small C program that uses the CPUID
-# instruction, but that again requires compiler support or compiling assembler
-# code.
-
-#=============================================================================
-# Copyright 2010-2011 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-function(ProcessorCount var)
-  # Unknown:
-  set(count 0)
-
-  if(WIN32)
-    # Windows:
-    set(count "$ENV{NUMBER_OF_PROCESSORS}")
-    #message("ProcessorCount: WIN32, trying environment variable")
-  endif()
-
-  if(NOT count)
-    # Mac, FreeBSD, OpenBSD (systems with sysctl):
-    find_program(ProcessorCount_cmd_sysctl sysctl
-      PATHS /usr/sbin /sbin)
-    mark_as_advanced(ProcessorCount_cmd_sysctl)
-    if(ProcessorCount_cmd_sysctl)
-      execute_process(COMMAND ${ProcessorCount_cmd_sysctl} -n hw.ncpu
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE count)
-      #message("ProcessorCount: trying sysctl '${ProcessorCount_cmd_sysctl}'")
-    endif()
-  endif()
-
-  if(NOT count)
-    # Linux (systems with getconf):
-    find_program(ProcessorCount_cmd_getconf getconf)
-    mark_as_advanced(ProcessorCount_cmd_getconf)
-    if(ProcessorCount_cmd_getconf)
-      execute_process(COMMAND ${ProcessorCount_cmd_getconf} _NPROCESSORS_ONLN
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE count)
-      #message("ProcessorCount: trying getconf '${ProcessorCount_cmd_getconf}'")
-    endif()
-  endif()
-
-  if(NOT count)
-    # HPUX (systems with machinfo):
-    find_program(ProcessorCount_cmd_machinfo machinfo
-      PATHS /usr/contrib/bin)
-    mark_as_advanced(ProcessorCount_cmd_machinfo)
-    if(ProcessorCount_cmd_machinfo)
-      execute_process(COMMAND ${ProcessorCount_cmd_machinfo}
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE machinfo_output)
-      string(REGEX MATCHALL "Number of CPUs = ([0-9]+)" procs "${machinfo_output}")
-      set(count "${CMAKE_MATCH_1}")
-      if(NOT count)
-        string(REGEX MATCHALL "([0-9]+) logical processors" procs "${machinfo_output}")
-        set(count "${CMAKE_MATCH_1}")
-      endif()
-      #message("ProcessorCount: trying machinfo '${ProcessorCount_cmd_machinfo}'")
-    else()
-      find_program(ProcessorCount_cmd_mpsched mpsched)
-      mark_as_advanced(ProcessorCount_cmd_mpsched)
-      if(ProcessorCount_cmd_mpsched)
-        execute_process(COMMAND ${ProcessorCount_cmd_mpsched} -s
-          OUTPUT_QUIET
-          ERROR_STRIP_TRAILING_WHITESPACE
-          ERROR_VARIABLE mpsched_output)
-        string(REGEX MATCHALL "Processor Count *: *([0-9]+)" procs "${mpsched_output}")
-        set(count "${CMAKE_MATCH_1}")
-        #message("ProcessorCount: trying mpsched -s '${ProcessorCount_cmd_mpsched}'")
-      endif()
-    endif()
-  endif()
-
-  if(NOT count)
-    # IRIX (systems with hinv):
-    find_program(ProcessorCount_cmd_hinv hinv
-      PATHS /sbin)
-    mark_as_advanced(ProcessorCount_cmd_hinv)
-    if(ProcessorCount_cmd_hinv)
-      execute_process(COMMAND ${ProcessorCount_cmd_hinv}
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE hinv_output)
-      string(REGEX MATCHALL "([0-9]+) .* Processors" procs "${hinv_output}")
-      set(count "${CMAKE_MATCH_1}")
-      #message("ProcessorCount: trying hinv '${ProcessorCount_cmd_hinv}'")
-    endif()
-  endif()
-
-  if(NOT count)
-    # AIX (systems with lsconf):
-    find_program(ProcessorCount_cmd_lsconf lsconf
-      PATHS /usr/sbin)
-    mark_as_advanced(ProcessorCount_cmd_lsconf)
-    if(ProcessorCount_cmd_lsconf)
-      execute_process(COMMAND ${ProcessorCount_cmd_lsconf}
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE lsconf_output)
-      string(REGEX MATCHALL "Number Of Processors: ([0-9]+)" procs "${lsconf_output}")
-      set(count "${CMAKE_MATCH_1}")
-      #message("ProcessorCount: trying lsconf '${ProcessorCount_cmd_lsconf}'")
-    endif()
-  endif()
-
-  if(NOT count)
-    # QNX (systems with pidin):
-    find_program(ProcessorCount_cmd_pidin pidin)
-    mark_as_advanced(ProcessorCount_cmd_pidin)
-    if(ProcessorCount_cmd_pidin)
-      execute_process(COMMAND ${ProcessorCount_cmd_pidin} info
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE pidin_output)
-      string(REGEX MATCHALL "Processor[0-9]+: " procs "${pidin_output}")
-      list(LENGTH procs count)
-      #message("ProcessorCount: trying pidin '${ProcessorCount_cmd_pidin}'")
-    endif()
-  endif()
-
-  if(NOT count)
-    # Sun (systems where uname -X emits "NumCPU" in its output):
-    find_program(ProcessorCount_cmd_uname uname)
-    mark_as_advanced(ProcessorCount_cmd_uname)
-    if(ProcessorCount_cmd_uname)
-      execute_process(COMMAND ${ProcessorCount_cmd_uname} -X
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE uname_X_output)
-      string(REGEX MATCHALL "NumCPU = ([0-9]+)" procs "${uname_X_output}")
-      set(count "${CMAKE_MATCH_1}")
-      #message("ProcessorCount: trying uname -X '${ProcessorCount_cmd_uname}'")
-    endif()
-  endif()
-
-  # Execute this code when all previously attempted methods return empty
-  # output:
-  #
-  if(NOT count)
-    # Systems with /proc/cpuinfo:
-    set(cpuinfo_file /proc/cpuinfo)
-    if(EXISTS "${cpuinfo_file}")
-      file(STRINGS "${cpuinfo_file}" procs REGEX "^processor.: [0-9]+$")
-      list(LENGTH procs count)
-      #message("ProcessorCount: trying cpuinfo '${cpuinfo_file}'")
-    endif()
-  endif()
-
-  if(NOT count)
-    # Haiku
-    find_program(ProcessorCount_cmd_sysinfo sysinfo)
-    if(ProcessorCount_cmd_sysinfo)
-      execute_process(COMMAND ${ProcessorCount_cmd_sysinfo}
-        ERROR_QUIET
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-        OUTPUT_VARIABLE sysinfo_X_output)
-      string(REGEX MATCHALL "\nCPU #[0-9]+:" procs "\n${sysinfo_X_output}")
-      list(LENGTH procs count)
-      #message("ProcessorCount: trying sysinfo '${ProcessorCount_cmd_sysinfo}'")
-    endif()
-  endif()
-
-  # Since cygwin builds of CMake do not define WIN32 anymore, but they still
-  # run on Windows, and will still have this env var defined:
-  #
-  if(NOT count)
-    set(count "$ENV{NUMBER_OF_PROCESSORS}")
-    #message("ProcessorCount: last fallback, trying environment variable")
-  endif()
-
-  # Ensure an integer return (avoid inadvertently returning an empty string
-  # or an error string)... If it's not a decimal integer, return 0:
-  #
-  if(NOT count MATCHES "^[0-9]+$")
-    set(count 0)
-  endif()
-
-  set(${var} ${count} PARENT_SCOPE)
-endfunction()
diff --git a/share/cmake-3.2/Modules/Qt4Macros.cmake b/share/cmake-3.2/Modules/Qt4Macros.cmake
deleted file mode 100644
index 6516b0a..0000000
--- a/share/cmake-3.2/Modules/Qt4Macros.cmake
+++ /dev/null
@@ -1,509 +0,0 @@
-#.rst:
-# Qt4Macros
-# ---------
-#
-#
-#
-# This file is included by FindQt4.cmake, don't include it directly.
-
-#=============================================================================
-# Copyright 2005-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-
-######################################
-#
-#       Macros for building Qt files
-#
-######################################
-
-
-macro (QT4_EXTRACT_OPTIONS _qt4_files _qt4_options _qt4_target)
-  set(${_qt4_files})
-  set(${_qt4_options})
-  set(_QT4_DOING_OPTIONS FALSE)
-  set(_QT4_DOING_TARGET FALSE)
-  foreach(_currentArg ${ARGN})
-    if ("x${_currentArg}" STREQUAL "xOPTIONS")
-      set(_QT4_DOING_OPTIONS TRUE)
-    elseif ("x${_currentArg}" STREQUAL "xTARGET")
-      set(_QT4_DOING_TARGET TRUE)
-    else ()
-      if(_QT4_DOING_TARGET)
-        set(${_qt4_target} "${_currentArg}")
-      elseif(_QT4_DOING_OPTIONS)
-        list(APPEND ${_qt4_options} "${_currentArg}")
-      else()
-        list(APPEND ${_qt4_files} "${_currentArg}")
-      endif()
-    endif ()
-  endforeach()
-endmacro ()
-
-
-# macro used to create the names of output files preserving relative dirs
-macro (QT4_MAKE_OUTPUT_FILE infile prefix ext outfile )
-  string(LENGTH ${CMAKE_CURRENT_BINARY_DIR} _binlength)
-  string(LENGTH ${infile} _infileLength)
-  set(_checkinfile ${CMAKE_CURRENT_SOURCE_DIR})
-  if(_infileLength GREATER _binlength)
-    string(SUBSTRING "${infile}" 0 ${_binlength} _checkinfile)
-    if(_checkinfile STREQUAL "${CMAKE_CURRENT_BINARY_DIR}")
-      file(RELATIVE_PATH rel ${CMAKE_CURRENT_BINARY_DIR} ${infile})
-    else()
-      file(RELATIVE_PATH rel ${CMAKE_CURRENT_SOURCE_DIR} ${infile})
-    endif()
-  else()
-    file(RELATIVE_PATH rel ${CMAKE_CURRENT_SOURCE_DIR} ${infile})
-  endif()
-  if(WIN32 AND rel MATCHES "^([a-zA-Z]):(.*)$") # absolute path
-    set(rel "${CMAKE_MATCH_1}_${CMAKE_MATCH_2}")
-  endif()
-  set(_outfile "${CMAKE_CURRENT_BINARY_DIR}/${rel}")
-  string(REPLACE ".." "__" _outfile ${_outfile})
-  get_filename_component(outpath ${_outfile} PATH)
-  get_filename_component(_outfile ${_outfile} NAME_WE)
-  file(MAKE_DIRECTORY ${outpath})
-  set(${outfile} ${outpath}/${prefix}${_outfile}.${ext})
-endmacro ()
-
-
-macro (QT4_GET_MOC_FLAGS _moc_flags)
-  set(${_moc_flags})
-  get_directory_property(_inc_DIRS INCLUDE_DIRECTORIES)
-
-  foreach(_current ${_inc_DIRS})
-    if("${_current}" MATCHES "\\.framework/?$")
-      string(REGEX REPLACE "/[^/]+\\.framework" "" framework_path "${_current}")
-      set(${_moc_flags} ${${_moc_flags}} "-F${framework_path}")
-    else()
-      set(${_moc_flags} ${${_moc_flags}} "-I${_current}")
-    endif()
-  endforeach()
-
-  get_directory_property(_defines COMPILE_DEFINITIONS)
-  foreach(_current ${_defines})
-    set(${_moc_flags} ${${_moc_flags}} "-D${_current}")
-  endforeach()
-
-  if(Q_WS_WIN)
-    set(${_moc_flags} ${${_moc_flags}} -DWIN32)
-  endif()
-
-endmacro()
-
-
-# helper macro to set up a moc rule
-function (QT4_CREATE_MOC_COMMAND infile outfile moc_flags moc_options moc_target)
-  # For Windows, create a parameters file to work around command line length limit
-  # Pass the parameters in a file.  Set the working directory to
-  # be that containing the parameters file and reference it by
-  # just the file name.  This is necessary because the moc tool on
-  # MinGW builds does not seem to handle spaces in the path to the
-  # file given with the @ syntax.
-  get_filename_component(_moc_outfile_name "${outfile}" NAME)
-  get_filename_component(_moc_outfile_dir "${outfile}" PATH)
-  if(_moc_outfile_dir)
-    set(_moc_working_dir WORKING_DIRECTORY ${_moc_outfile_dir})
-  endif()
-  set (_moc_parameters_file ${outfile}_parameters)
-  set (_moc_parameters ${moc_flags} ${moc_options} -o "${outfile}" "${infile}")
-  string (REPLACE ";" "\n" _moc_parameters "${_moc_parameters}")
-
-  if(moc_target)
-    set (_moc_parameters_file ${_moc_parameters_file}$<$<BOOL:$<CONFIGURATION>>:_$<CONFIGURATION>>)
-    set(targetincludes "$<TARGET_PROPERTY:${moc_target},INCLUDE_DIRECTORIES>")
-    set(targetdefines "$<TARGET_PROPERTY:${moc_target},COMPILE_DEFINITIONS>")
-
-    set(targetincludes "$<$<BOOL:${targetincludes}>:-I$<JOIN:${targetincludes},\n-I>\n>")
-    set(targetdefines "$<$<BOOL:${targetdefines}>:-D$<JOIN:${targetdefines},\n-D>\n>")
-
-    file (GENERATE
-      OUTPUT ${_moc_parameters_file}
-      CONTENT "${targetdefines}${targetincludes}${_moc_parameters}\n"
-    )
-
-    set(targetincludes)
-    set(targetdefines)
-  else()
-    set(CMAKE_CONFIGURABLE_FILE_CONTENT "${_moc_parameters}")
-    configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
-                   "${_moc_parameters_file}" @ONLY)
-  endif()
-
-  set(_moc_extra_parameters_file @${_moc_parameters_file})
-  add_custom_command(OUTPUT ${outfile}
-                      COMMAND Qt4::moc ${_moc_extra_parameters_file}
-                      DEPENDS ${infile} ${_moc_parameters_file}
-                      ${_moc_working_dir}
-                      VERBATIM)
-endfunction ()
-
-
-macro (QT4_GENERATE_MOC infile outfile )
-# get include dirs and flags
-   QT4_GET_MOC_FLAGS(moc_flags)
-   get_filename_component(abs_infile ${infile} ABSOLUTE)
-   set(_outfile "${outfile}")
-   if(NOT IS_ABSOLUTE "${outfile}")
-     set(_outfile "${CMAKE_CURRENT_BINARY_DIR}/${outfile}")
-   endif()
-
-   if ("x${ARGV2}" STREQUAL "xTARGET")
-      set(moc_target ${ARGV3})
-   endif()
-   QT4_CREATE_MOC_COMMAND(${abs_infile} ${_outfile} "${moc_flags}" "" "${moc_target}")
-   set_source_files_properties(${outfile} PROPERTIES SKIP_AUTOMOC TRUE)  # dont run automoc on this file
-endmacro ()
-
-
-# QT4_WRAP_CPP(outfiles inputfile ... )
-
-macro (QT4_WRAP_CPP outfiles )
-  # get include dirs
-  QT4_GET_MOC_FLAGS(moc_flags)
-  QT4_EXTRACT_OPTIONS(moc_files moc_options moc_target ${ARGN})
-
-  foreach (it ${moc_files})
-    get_filename_component(it ${it} ABSOLUTE)
-    QT4_MAKE_OUTPUT_FILE(${it} moc_ cxx outfile)
-    QT4_CREATE_MOC_COMMAND(${it} ${outfile} "${moc_flags}" "${moc_options}" "${moc_target}")
-    set(${outfiles} ${${outfiles}} ${outfile})
-  endforeach()
-
-endmacro ()
-
-
-# QT4_WRAP_UI(outfiles inputfile ... )
-
-macro (QT4_WRAP_UI outfiles )
-  QT4_EXTRACT_OPTIONS(ui_files ui_options ui_target ${ARGN})
-
-  foreach (it ${ui_files})
-    get_filename_component(outfile ${it} NAME_WE)
-    get_filename_component(infile ${it} ABSOLUTE)
-    set(outfile ${CMAKE_CURRENT_BINARY_DIR}/ui_${outfile}.h)
-    add_custom_command(OUTPUT ${outfile}
-      COMMAND Qt4::uic
-      ARGS ${ui_options} -o ${outfile} ${infile}
-      MAIN_DEPENDENCY ${infile} VERBATIM)
-    set(${outfiles} ${${outfiles}} ${outfile})
-  endforeach ()
-
-endmacro ()
-
-
-# QT4_ADD_RESOURCES(outfiles inputfile ... )
-
-macro (QT4_ADD_RESOURCES outfiles )
-  QT4_EXTRACT_OPTIONS(rcc_files rcc_options rcc_target ${ARGN})
-
-  foreach (it ${rcc_files})
-    get_filename_component(outfilename ${it} NAME_WE)
-    get_filename_component(infile ${it} ABSOLUTE)
-    get_filename_component(rc_path ${infile} PATH)
-    set(outfile ${CMAKE_CURRENT_BINARY_DIR}/qrc_${outfilename}.cxx)
-
-    set(_RC_DEPENDS)
-    if(EXISTS "${infile}")
-      #  parse file for dependencies
-      #  all files are absolute paths or relative to the location of the qrc file
-      file(READ "${infile}" _RC_FILE_CONTENTS)
-      string(REGEX MATCHALL "<file[^<]+" _RC_FILES "${_RC_FILE_CONTENTS}")
-      foreach(_RC_FILE ${_RC_FILES})
-        string(REGEX REPLACE "^<file[^>]*>" "" _RC_FILE "${_RC_FILE}")
-        if(NOT IS_ABSOLUTE "${_RC_FILE}")
-          set(_RC_FILE "${rc_path}/${_RC_FILE}")
-        endif()
-        set(_RC_DEPENDS ${_RC_DEPENDS} "${_RC_FILE}")
-      endforeach()
-      unset(_RC_FILES)
-      unset(_RC_FILE_CONTENTS)
-      # Since this cmake macro is doing the dependency scanning for these files,
-      # let's make a configured file and add it as a dependency so cmake is run
-      # again when dependencies need to be recomputed.
-      QT4_MAKE_OUTPUT_FILE("${infile}" "" "qrc.depends" out_depends)
-      configure_file("${infile}" "${out_depends}" COPYONLY)
-    else()
-      # The .qrc file does not exist (yet). Let's add a dependency and hope
-      # that it will be generated later
-      set(out_depends)
-    endif()
-
-    add_custom_command(OUTPUT ${outfile}
-      COMMAND Qt4::rcc
-      ARGS ${rcc_options} -name ${outfilename} -o ${outfile} ${infile}
-      MAIN_DEPENDENCY ${infile}
-      DEPENDS ${_RC_DEPENDS} "${out_depends}" VERBATIM)
-    set(${outfiles} ${${outfiles}} ${outfile})
-  endforeach ()
-
-endmacro ()
-
-
-macro(QT4_ADD_DBUS_INTERFACE _sources _interface _basename)
-  get_filename_component(_infile ${_interface} ABSOLUTE)
-  set(_header "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.h")
-  set(_impl   "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.cpp")
-  set(_moc    "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.moc")
-
-  get_source_file_property(_nonamespace ${_interface} NO_NAMESPACE)
-  if(_nonamespace)
-    set(_params -N -m)
-  else()
-    set(_params -m)
-  endif()
-
-  get_source_file_property(_classname ${_interface} CLASSNAME)
-  if(_classname)
-    set(_params ${_params} -c ${_classname})
-  endif()
-
-  get_source_file_property(_include ${_interface} INCLUDE)
-  if(_include)
-    set(_params ${_params} -i ${_include})
-  endif()
-
-  add_custom_command(OUTPUT "${_impl}" "${_header}"
-      COMMAND Qt4::qdbusxml2cpp ${_params} -p ${_basename} ${_infile}
-      DEPENDS ${_infile} VERBATIM)
-
-  set_source_files_properties("${_impl}" PROPERTIES SKIP_AUTOMOC TRUE)
-
-  QT4_GENERATE_MOC("${_header}" "${_moc}")
-
-  list(APPEND ${_sources} "${_impl}" "${_header}" "${_moc}")
-  MACRO_ADD_FILE_DEPENDENCIES("${_impl}" "${_moc}")
-
-endmacro()
-
-
-macro(QT4_ADD_DBUS_INTERFACES _sources)
-  foreach (_current_FILE ${ARGN})
-    get_filename_component(_infile ${_current_FILE} ABSOLUTE)
-    get_filename_component(_basename ${_current_FILE} NAME)
-    # get the part before the ".xml" suffix
-    string(TOLOWER ${_basename} _basename)
-    string(REGEX REPLACE "(.*\\.)?([^\\.]+)\\.xml" "\\2" _basename ${_basename})
-    QT4_ADD_DBUS_INTERFACE(${_sources} ${_infile} ${_basename}interface)
-  endforeach ()
-endmacro()
-
-
-macro(QT4_GENERATE_DBUS_INTERFACE _header) # _customName OPTIONS -some -options )
-  QT4_EXTRACT_OPTIONS(_customName _qt4_dbus_options _qt4_dbus_target ${ARGN})
-
-  get_filename_component(_in_file ${_header} ABSOLUTE)
-  get_filename_component(_basename ${_header} NAME_WE)
-
-  if (_customName)
-    if (IS_ABSOLUTE ${_customName})
-      get_filename_component(_containingDir ${_customName} PATH)
-      if (NOT EXISTS ${_containingDir})
-        file(MAKE_DIRECTORY "${_containingDir}")
-      endif()
-      set(_target ${_customName})
-    else()
-      set(_target ${CMAKE_CURRENT_BINARY_DIR}/${_customName})
-    endif()
-  else ()
-    set(_target ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.xml)
-  endif ()
-
-  add_custom_command(OUTPUT ${_target}
-      COMMAND Qt4::qdbuscpp2xml ${_qt4_dbus_options} ${_in_file} -o ${_target}
-      DEPENDS ${_in_file} VERBATIM
-  )
-endmacro()
-
-
-macro(QT4_ADD_DBUS_ADAPTOR _sources _xml_file _include _parentClass) # _optionalBasename _optionalClassName)
-  get_filename_component(_infile ${_xml_file} ABSOLUTE)
-
-  set(_optionalBasename "${ARGV4}")
-  if (_optionalBasename)
-    set(_basename ${_optionalBasename} )
-  else ()
-    string(REGEX REPLACE "(.*[/\\.])?([^\\.]+)\\.xml" "\\2adaptor" _basename ${_infile})
-    string(TOLOWER ${_basename} _basename)
-  endif ()
-
-  set(_optionalClassName "${ARGV5}")
-  set(_header "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.h")
-  set(_impl   "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.cpp")
-  set(_moc    "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.moc")
-
-  if(_optionalClassName)
-    add_custom_command(OUTPUT "${_impl}" "${_header}"
-       COMMAND Qt4::qdbusxml2cpp -m -a ${_basename} -c ${_optionalClassName} -i ${_include} -l ${_parentClass} ${_infile}
-       DEPENDS ${_infile} VERBATIM
-    )
-  else()
-    add_custom_command(OUTPUT "${_impl}" "${_header}"
-       COMMAND Qt4::qdbusxml2cpp -m -a ${_basename} -i ${_include} -l ${_parentClass} ${_infile}
-       DEPENDS ${_infile} VERBATIM
-     )
-  endif()
-
-  QT4_GENERATE_MOC("${_header}" "${_moc}")
-  set_source_files_properties("${_impl}" PROPERTIES SKIP_AUTOMOC TRUE)
-  MACRO_ADD_FILE_DEPENDENCIES("${_impl}" "${_moc}")
-
-  list(APPEND ${_sources} "${_impl}" "${_header}" "${_moc}")
-endmacro()
-
-
-macro(QT4_AUTOMOC)
-  if(NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.11)
-    message(DEPRECATION "The qt4_automoc macro is obsolete. Use the CMAKE_AUTOMOC feature instead.")
-  endif()
-  QT4_GET_MOC_FLAGS(_moc_INCS)
-
-  set(_matching_FILES )
-  foreach (_current_FILE ${ARGN})
-
-    get_filename_component(_abs_FILE ${_current_FILE} ABSOLUTE)
-    # if "SKIP_AUTOMOC" is set to true, we will not handle this file here.
-    # This is required to make uic work correctly:
-    # we need to add generated .cpp files to the sources (to compile them),
-    # but we cannot let automoc handle them, as the .cpp files don't exist yet when
-    # cmake is run for the very first time on them -> however the .cpp files might
-    # exist at a later run. at that time we need to skip them, so that we don't add two
-    # different rules for the same moc file
-    get_source_file_property(_skip ${_abs_FILE} SKIP_AUTOMOC)
-
-    if ( NOT _skip AND EXISTS ${_abs_FILE} )
-
-      file(READ ${_abs_FILE} _contents)
-
-      get_filename_component(_abs_PATH ${_abs_FILE} PATH)
-
-      string(REGEX MATCHALL "# *include +[^ ]+\\.moc[\">]" _match "${_contents}")
-      if(_match)
-        foreach (_current_MOC_INC ${_match})
-          string(REGEX MATCH "[^ <\"]+\\.moc" _current_MOC "${_current_MOC_INC}")
-
-          get_filename_component(_basename ${_current_MOC} NAME_WE)
-          if(EXISTS ${_abs_PATH}/${_basename}.hpp)
-            set(_header ${_abs_PATH}/${_basename}.hpp)
-          else()
-            set(_header ${_abs_PATH}/${_basename}.h)
-          endif()
-          set(_moc    ${CMAKE_CURRENT_BINARY_DIR}/${_current_MOC})
-          QT4_CREATE_MOC_COMMAND(${_header} ${_moc} "${_moc_INCS}" "" "")
-          MACRO_ADD_FILE_DEPENDENCIES(${_abs_FILE} ${_moc})
-        endforeach ()
-      endif()
-    endif ()
-  endforeach ()
-endmacro()
-
-
-macro(QT4_CREATE_TRANSLATION _qm_files)
-   QT4_EXTRACT_OPTIONS(_lupdate_files _lupdate_options _lupdate_target ${ARGN})
-   set(_my_sources)
-   set(_my_dirs)
-   set(_my_tsfiles)
-   set(_ts_pro)
-   foreach (_file ${_lupdate_files})
-     get_filename_component(_ext ${_file} EXT)
-     get_filename_component(_abs_FILE ${_file} ABSOLUTE)
-     if(_ext MATCHES "ts")
-       list(APPEND _my_tsfiles ${_abs_FILE})
-     else()
-       if(NOT _ext)
-         list(APPEND _my_dirs ${_abs_FILE})
-       else()
-         list(APPEND _my_sources ${_abs_FILE})
-       endif()
-     endif()
-   endforeach()
-   foreach(_ts_file ${_my_tsfiles})
-     if(_my_sources)
-       # make a .pro file to call lupdate on, so we don't make our commands too
-       # long for some systems
-       get_filename_component(_ts_name ${_ts_file} NAME_WE)
-       set(_ts_pro ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/${_ts_name}_lupdate.pro)
-       set(_pro_srcs)
-       foreach(_pro_src ${_my_sources})
-         set(_pro_srcs "${_pro_srcs} \\\n  \"${_pro_src}\"")
-       endforeach()
-       set(_pro_includes)
-       get_directory_property(_inc_DIRS INCLUDE_DIRECTORIES)
-       list(REMOVE_DUPLICATES _inc_DIRS)
-       foreach(_pro_include ${_inc_DIRS})
-         get_filename_component(_abs_include "${_pro_include}" ABSOLUTE)
-         set(_pro_includes "${_pro_includes} \\\n  \"${_abs_include}\"")
-       endforeach()
-       file(WRITE ${_ts_pro} "SOURCES =${_pro_srcs}\nINCLUDEPATH =${_pro_includes}\n")
-     endif()
-     add_custom_command(OUTPUT ${_ts_file}
-        COMMAND Qt4::lupdate
-        ARGS ${_lupdate_options} ${_ts_pro} ${_my_dirs} -ts ${_ts_file}
-        DEPENDS ${_my_sources} ${_ts_pro} VERBATIM)
-   endforeach()
-   QT4_ADD_TRANSLATION(${_qm_files} ${_my_tsfiles})
-endmacro()
-
-
-macro(QT4_ADD_TRANSLATION _qm_files)
-  foreach (_current_FILE ${ARGN})
-    get_filename_component(_abs_FILE ${_current_FILE} ABSOLUTE)
-    get_filename_component(qm ${_abs_FILE} NAME_WE)
-    get_source_file_property(output_location ${_abs_FILE} OUTPUT_LOCATION)
-    if(output_location)
-      file(MAKE_DIRECTORY "${output_location}")
-      set(qm "${output_location}/${qm}.qm")
-    else()
-      set(qm "${CMAKE_CURRENT_BINARY_DIR}/${qm}.qm")
-    endif()
-
-    add_custom_command(OUTPUT ${qm}
-       COMMAND Qt4::lrelease
-       ARGS ${_abs_FILE} -qm ${qm}
-       DEPENDS ${_abs_FILE} VERBATIM
-    )
-    set(${_qm_files} ${${_qm_files}} ${qm})
-  endforeach ()
-endmacro()
-
-function(qt4_use_modules _target _link_type)
-  if(NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.11)
-    message(DEPRECATION "The qt4_use_modules function is obsolete. Use target_link_libraries with IMPORTED targets instead.")
-  endif()
-  if ("${_link_type}" STREQUAL "LINK_PUBLIC" OR "${_link_type}" STREQUAL "LINK_PRIVATE")
-    set(modules ${ARGN})
-    set(link_type ${_link_type})
-  else()
-    set(modules ${_link_type} ${ARGN})
-  endif()
-  foreach(_module ${modules})
-    string(TOUPPER ${_module} _ucmodule)
-    set(_targetPrefix QT_QT${_ucmodule})
-    if (_ucmodule STREQUAL QAXCONTAINER OR _ucmodule STREQUAL QAXSERVER)
-      if (NOT QT_Q${_ucmodule}_FOUND)
-        message(FATAL_ERROR "Can not use \"${_module}\" module which has not yet been found.")
-      endif()
-      set(_targetPrefix QT_Q${_ucmodule})
-    else()
-      if (NOT QT_QT${_ucmodule}_FOUND)
-        message(FATAL_ERROR "Can not use \"${_module}\" module which has not yet been found.")
-      endif()
-      if ("${_ucmodule}" STREQUAL "MAIN")
-        message(FATAL_ERROR "Can not use \"${_module}\" module with qt4_use_modules.")
-      endif()
-    endif()
-    target_link_libraries(${_target} ${link_type} ${${_targetPrefix}_LIBRARIES})
-    set_property(TARGET ${_target} APPEND PROPERTY INCLUDE_DIRECTORIES ${${_targetPrefix}_INCLUDE_DIR} ${QT_HEADERS_DIR} ${QT_MKSPECS_DIR}/default)
-    set_property(TARGET ${_target} APPEND PROPERTY COMPILE_DEFINITIONS ${${_targetPrefix}_COMPILE_DEFINITIONS})
-  endforeach()
-endfunction()
diff --git a/share/cmake-3.2/Modules/Squish4RunTestCase.sh b/share/cmake-3.2/Modules/Squish4RunTestCase.sh
deleted file mode 100755
index abd5deb..0000000
--- a/share/cmake-3.2/Modules/Squish4RunTestCase.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-
-SQUISHSERVER=$1
-SQUISHRUNNER=$2
-TESTSUITE=$3
-TESTCASE=$4
-AUT=$5
-AUTDIR=$6
-SETTINGSGROUP=$7
-
-$SQUISHSERVER --stop > /dev/null 2>&1
-
-echo "Adding AUT... $SQUISHSERVER --settingsGroup $SETTINGSGROUP --config addAUT $AUT $AUTDIR"
-$SQUISHSERVER --settingsGroup "$SETTINGSGROUP" --config addAUT "$AUT" "$AUTDIR" || exit -1
-# sleep 1
-
-echo "Starting the squish server... $SQUISHSERVER --daemon"
-$SQUISHSERVER --daemon || exit -1
-# sleep 2
-
-echo "Running the test case...$SQUISHRUNNER --settingsGroup $SETTINGSGROUP --testsuite $TESTSUITE --testcase $TESTCASE"
-$SQUISHRUNNER --settingsGroup "$SETTINGSGROUP" --testsuite "$TESTSUITE" --testcase "$TESTCASE"
-returnValue=$?
-
-echo "Stopping the squish server... $SQUISHSERVER --stop"
-$SQUISHSERVER --stop
-
-exit $returnValue
diff --git a/share/cmake-3.2/Modules/TestBigEndian.cmake b/share/cmake-3.2/Modules/TestBigEndian.cmake
deleted file mode 100644
index fcb41ab..0000000
--- a/share/cmake-3.2/Modules/TestBigEndian.cmake
+++ /dev/null
@@ -1,119 +0,0 @@
-#.rst:
-# TestBigEndian
-# -------------
-#
-# Define macro to determine endian type
-#
-# Check if the system is big endian or little endian
-#
-# ::
-#
-#   TEST_BIG_ENDIAN(VARIABLE)
-#   VARIABLE - variable to store the result to
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-macro(TEST_BIG_ENDIAN VARIABLE)
-  if(NOT DEFINED HAVE_${VARIABLE})
-    message(STATUS "Check if the system is big endian")
-    message(STATUS "Searching 16 bit integer")
-
-    include(CheckTypeSize)
-
-    CHECK_TYPE_SIZE("unsigned short" CMAKE_SIZEOF_UNSIGNED_SHORT)
-    if(CMAKE_SIZEOF_UNSIGNED_SHORT EQUAL 2)
-      message(STATUS "Using unsigned short")
-      set(CMAKE_16BIT_TYPE "unsigned short")
-    else()
-      CHECK_TYPE_SIZE("unsigned int"   CMAKE_SIZEOF_UNSIGNED_INT)
-      if(CMAKE_SIZEOF_UNSIGNED_INT)
-        message(STATUS "Using unsigned int")
-        set(CMAKE_16BIT_TYPE "unsigned int")
-
-      else()
-
-        CHECK_TYPE_SIZE("unsigned long"  CMAKE_SIZEOF_UNSIGNED_LONG)
-        if(CMAKE_SIZEOF_UNSIGNED_LONG)
-          message(STATUS "Using unsigned long")
-          set(CMAKE_16BIT_TYPE "unsigned long")
-        else()
-          message(FATAL_ERROR "no suitable type found")
-        endif()
-
-      endif()
-
-    endif()
-
-
-    configure_file("${CMAKE_ROOT}/Modules/TestEndianess.c.in"
-                   "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c"
-                   @ONLY)
-
-     file(READ "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c"
-          TEST_ENDIANESS_FILE_CONTENT)
-
-     try_compile(HAVE_${VARIABLE}
-      "${CMAKE_BINARY_DIR}"
-      "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c"
-      OUTPUT_VARIABLE OUTPUT
-      COPY_FILE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/TestEndianess.bin" )
-
-      if(HAVE_${VARIABLE})
-
-        file(STRINGS "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/TestEndianess.bin"
-            CMAKE_TEST_ENDIANESS_STRINGS_LE LIMIT_COUNT 1 REGEX "THIS IS LITTLE ENDIAN")
-
-        file(STRINGS "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/TestEndianess.bin"
-            CMAKE_TEST_ENDIANESS_STRINGS_BE LIMIT_COUNT 1 REGEX "THIS IS BIG ENDIAN")
-
-        # on mac, if there are universal binaries built both will be true
-        # return the result depending on the machine on which cmake runs
-        if(CMAKE_TEST_ENDIANESS_STRINGS_BE  AND  CMAKE_TEST_ENDIANESS_STRINGS_LE)
-          if(CMAKE_SYSTEM_PROCESSOR MATCHES powerpc)
-            set(CMAKE_TEST_ENDIANESS_STRINGS_BE TRUE)
-            set(CMAKE_TEST_ENDIANESS_STRINGS_LE FALSE)
-          else()
-            set(CMAKE_TEST_ENDIANESS_STRINGS_BE FALSE)
-            set(CMAKE_TEST_ENDIANESS_STRINGS_LE TRUE)
-          endif()
-          message(STATUS "TEST_BIG_ENDIAN found different results, consider setting CMAKE_OSX_ARCHITECTURES or CMAKE_TRY_COMPILE_OSX_ARCHITECTURES to one or no architecture !")
-        endif()
-
-        if(CMAKE_TEST_ENDIANESS_STRINGS_LE)
-          set(${VARIABLE} 0 CACHE INTERNAL "Result of TEST_BIG_ENDIAN" FORCE)
-          message(STATUS "Check if the system is big endian - little endian")
-        endif()
-
-        if(CMAKE_TEST_ENDIANESS_STRINGS_BE)
-          set(${VARIABLE} 1 CACHE INTERNAL "Result of TEST_BIG_ENDIAN" FORCE)
-          message(STATUS "Check if the system is big endian - big endian")
-        endif()
-
-        if(NOT CMAKE_TEST_ENDIANESS_STRINGS_BE  AND  NOT CMAKE_TEST_ENDIANESS_STRINGS_LE)
-          message(SEND_ERROR "TEST_BIG_ENDIAN found no result!")
-        endif()
-
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-          "Determining if the system is big endian passed with the following output:\n${OUTPUT}\nTestEndianess.c:\n${TEST_ENDIANESS_FILE_CONTENT}\n\n")
-
-      else()
-        message(STATUS "Check if the system is big endian - failed")
-        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-          "Determining if the system is big endian failed with the following output:\n${OUTPUT}\nTestEndianess.c:\n${TEST_ENDIANESS_FILE_CONTENT}\n\n")
-        set(${VARIABLE})
-      endif()
-  endif()
-endmacro()
-
-
diff --git a/share/cmake-3.2/Modules/TestForANSIStreamHeaders.cxx b/share/cmake-3.2/Modules/TestForANSIStreamHeaders.cxx
deleted file mode 100644
index cfb7686..0000000
--- a/share/cmake-3.2/Modules/TestForANSIStreamHeaders.cxx
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <iostream>
-
-int main(int,char *[])
-{
-  return 0;
-}
diff --git a/share/cmake-3.2/Modules/TestForAnsiForScope.cxx b/share/cmake-3.2/Modules/TestForAnsiForScope.cxx
deleted file mode 100644
index e8807ab..0000000
--- a/share/cmake-3.2/Modules/TestForAnsiForScope.cxx
+++ /dev/null
@@ -1,7 +0,0 @@
-int main(int, char*[])
-{
-  int i;
-  for(int i=0; i < 1; ++i);
-  (void)i;
-  return 0;
-}
diff --git a/share/cmake-3.2/Modules/TestForSSTREAM.cxx b/share/cmake-3.2/Modules/TestForSSTREAM.cxx
deleted file mode 100644
index 1c939da..0000000
--- a/share/cmake-3.2/Modules/TestForSSTREAM.cxx
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sstream>
-int main(int, char*[])
-{
-  std::ostringstream os;
-  os << "12345";
-  if(os.str().size() == 5)
-    {
-    return 0;
-    }
-  return -1;
-}
diff --git a/share/cmake-3.2/Modules/TestForSTDNamespace.cxx b/share/cmake-3.2/Modules/TestForSTDNamespace.cxx
deleted file mode 100644
index b537d44..0000000
--- a/share/cmake-3.2/Modules/TestForSTDNamespace.cxx
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <list>
-int main(int, char*[])
-{
-  std::list<int>();
-  return 0;
-}
diff --git a/share/cmake-3.2/Modules/UseJava.cmake b/share/cmake-3.2/Modules/UseJava.cmake
deleted file mode 100644
index 3a6acd8..0000000
--- a/share/cmake-3.2/Modules/UseJava.cmake
+++ /dev/null
@@ -1,1075 +0,0 @@
-#.rst:
-# UseJava
-# -------
-#
-# Use Module for Java
-#
-# This file provides functions for Java.  It is assumed that
-# FindJava.cmake has already been loaded.  See FindJava.cmake for
-# information on how to load Java into your CMake project.
-#
-# ::
-#
-#  add_jar(target_name
-#          [SOURCES] source1 [source2 ...] [resource1 ...]
-#          [INCLUDE_JARS jar1 [jar2 ...]]
-#          [ENTRY_POINT entry]
-#          [VERSION version]
-#          [OUTPUT_NAME name]
-#          [OUTPUT_DIR dir]
-#          )
-#
-# This command creates a <target_name>.jar.  It compiles the given
-# source files (source) and adds the given resource files (resource) to
-# the jar file.  If only resource files are given then just a jar file
-# is created.  The list of include jars are added to the classpath when
-# compiling the java sources and also to the dependencies of the target.
-# INCLUDE_JARS also accepts other target names created by add_jar.  For
-# backwards compatibility, jar files listed as sources are ignored (as
-# they have been since the first version of this module).
-#
-# The default OUTPUT_DIR can also be changed by setting the variable
-# CMAKE_JAVA_TARGET_OUTPUT_DIR.
-#
-# Additional instructions:
-#
-# ::
-#
-#    To add compile flags to the target you can set these flags with
-#    the following variable:
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAVA_COMPILE_FLAGS -nowarn)
-#
-#
-#
-# ::
-#
-#    To add a path or a jar file to the class path you can do this
-#    with the CMAKE_JAVA_INCLUDE_PATH variable.
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAVA_INCLUDE_PATH /usr/share/java/shibboleet.jar)
-#
-#
-#
-# ::
-#
-#    To use a different output name for the target you can set it with:
-#
-#
-#
-# ::
-#
-#        add_jar(foobar foobar.java OUTPUT_NAME shibboleet.jar)
-#
-#
-#
-# ::
-#
-#    To use a different output directory than CMAKE_CURRENT_BINARY_DIR
-#    you can set it with:
-#
-#
-#
-# ::
-#
-#        add_jar(foobar foobar.java OUTPUT_DIR ${PROJECT_BINARY_DIR}/bin)
-#
-#
-#
-# ::
-#
-#    To define an entry point in your jar you can set it with the ENTRY_POINT
-#    named argument:
-#
-#
-#
-# ::
-#
-#        add_jar(example ENTRY_POINT com/examples/MyProject/Main)
-#
-#
-#
-# ::
-#
-#    To define a custom manifest for the jar, you can set it with the manifest
-#    named argument:
-#
-#
-#
-# ::
-#
-#        add_jar(example MANIFEST /path/to/manifest)
-#
-#
-#
-# ::
-#
-#    To add a VERSION to the target output name you can set it using
-#    the VERSION named argument to add_jar. This will create a jar file with the
-#    name shibboleet-1.0.0.jar and will create a symlink shibboleet.jar
-#    pointing to the jar with the version information.
-#
-#
-#
-# ::
-#
-#        add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
-#
-#
-#
-# ::
-#
-#     If the target is a JNI library, utilize the following commands to
-#     create a JNI symbolic link:
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JNI_TARGET TRUE)
-#        add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
-#        install_jar(shibboleet ${LIB_INSTALL_DIR}/shibboleet)
-#        install_jni_symlink(shibboleet ${JAVA_LIB_INSTALL_DIR})
-#
-#
-#
-# ::
-#
-#     If a single target needs to produce more than one jar from its
-#     java source code, to prevent the accumulation of duplicate class
-#     files in subsequent jars, set/reset CMAKE_JAR_CLASSES_PREFIX prior
-#     to calling the add_jar() function:
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAR_CLASSES_PREFIX com/redhat/foo)
-#        add_jar(foo foo.java)
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAR_CLASSES_PREFIX com/redhat/bar)
-#        add_jar(bar bar.java)
-#
-#
-#
-# Target Properties:
-#
-# ::
-#
-#    The add_jar() functions sets some target properties. You can get these
-#    properties with the
-#       get_property(TARGET <target_name> PROPERTY <propery_name>)
-#    command.
-#
-#
-#
-# ::
-#
-#    INSTALL_FILES      The files which should be installed. This is used by
-#                       install_jar().
-#    JNI_SYMLINK        The JNI symlink which should be installed.
-#                       This is used by install_jni_symlink().
-#    JAR_FILE           The location of the jar file so that you can include
-#                       it.
-#    CLASS_DIR          The directory where the class files can be found. For
-#                       example to use them with javah.
-#
-# ::
-#
-#  find_jar(<VAR>
-#           name | NAMES name1 [name2 ...]
-#           [PATHS path1 [path2 ... ENV var]]
-#           [VERSIONS version1 [version2]]
-#           [DOC "cache documentation string"]
-#           )
-#
-# This command is used to find a full path to the named jar.  A cache
-# entry named by <VAR> is created to stor the result of this command.
-# If the full path to a jar is found the result is stored in the
-# variable and the search will not repeated unless the variable is
-# cleared.  If nothing is found, the result will be <VAR>-NOTFOUND, and
-# the search will be attempted again next time find_jar is invoked with
-# the same variable.  The name of the full path to a file that is
-# searched for is specified by the names listed after NAMES argument.
-# Additional search locations can be specified after the PATHS argument.
-# If you require special a version of a jar file you can specify it with
-# the VERSIONS argument.  The argument after DOC will be used for the
-# documentation string in the cache.
-#
-# ::
-#
-#  install_jar(TARGET_NAME DESTINATION)
-#
-# This command installs the TARGET_NAME files to the given DESTINATION.
-# It should be called in the same scope as add_jar() or it will fail.
-#
-# ::
-#
-#  install_jni_symlink(TARGET_NAME DESTINATION)
-#
-# This command installs the TARGET_NAME JNI symlinks to the given
-# DESTINATION.  It should be called in the same scope as add_jar() or it
-# will fail.
-#
-# ::
-#
-#  create_javadoc(<VAR>
-#                 PACKAGES pkg1 [pkg2 ...]
-#                 [SOURCEPATH <sourcepath>]
-#                 [CLASSPATH <classpath>]
-#                 [INSTALLPATH <install path>]
-#                 [DOCTITLE "the documentation title"]
-#                 [WINDOWTITLE "the title of the document"]
-#                 [AUTHOR TRUE|FALSE]
-#                 [USE TRUE|FALSE]
-#                 [VERSION TRUE|FALSE]
-#                 )
-#
-# Create java documentation based on files or packages.  For more
-# details please read the javadoc manpage.
-#
-# There are two main signatures for create_javadoc.  The first signature
-# works with package names on a path with source files:
-#
-# ::
-#
-#    Example:
-#    create_javadoc(my_example_doc
-#      PACKAGES com.exmaple.foo com.example.bar
-#      SOURCEPATH "${CMAKE_CURRENT_SOURCE_DIR}"
-#      CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
-#      WINDOWTITLE "My example"
-#      DOCTITLE "<h1>My example</h1>"
-#      AUTHOR TRUE
-#      USE TRUE
-#      VERSION TRUE
-#    )
-#
-#
-#
-# The second signature for create_javadoc works on a given list of
-# files.
-#
-# ::
-#
-#    create_javadoc(<VAR>
-#                   FILES file1 [file2 ...]
-#                   [CLASSPATH <classpath>]
-#                   [INSTALLPATH <install path>]
-#                   [DOCTITLE "the documentation title"]
-#                   [WINDOWTITLE "the title of the document"]
-#                   [AUTHOR TRUE|FALSE]
-#                   [USE TRUE|FALSE]
-#                   [VERSION TRUE|FALSE]
-#                  )
-#
-#
-#
-# Example:
-#
-# ::
-#
-#    create_javadoc(my_example_doc
-#      FILES ${example_SRCS}
-#      CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
-#      WINDOWTITLE "My example"
-#      DOCTITLE "<h1>My example</h1>"
-#      AUTHOR TRUE
-#      USE TRUE
-#      VERSION TRUE
-#    )
-#
-#
-#
-# Both signatures share most of the options.  These options are the same
-# as what you can find in the javadoc manpage.  Please look at the
-# manpage for CLASSPATH, DOCTITLE, WINDOWTITLE, AUTHOR, USE and VERSION.
-#
-# The documentation will be by default installed to
-#
-# ::
-#
-#    ${CMAKE_INSTALL_PREFIX}/share/javadoc/<VAR>
-#
-#
-#
-# if you don't set the INSTALLPATH.
-
-#=============================================================================
-# Copyright 2013 OpenGamma Ltd. <graham@opengamma.com>
-# Copyright 2010-2011 Andreas schneider <asn@redhat.com>
-# Copyright 2010-2013 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
-
-function (__java_copy_file src dest comment)
-    add_custom_command(
-        OUTPUT  ${dest}
-        COMMAND cmake -E copy_if_different
-        ARGS    ${src}
-                ${dest}
-        DEPENDS ${src}
-        COMMENT ${comment})
-endfunction ()
-
-# define helper scripts
-set(_JAVA_CLASS_FILELIST_SCRIPT ${CMAKE_CURRENT_LIST_DIR}/UseJavaClassFilelist.cmake)
-set(_JAVA_SYMLINK_SCRIPT ${CMAKE_CURRENT_LIST_DIR}/UseJavaSymlinks.cmake)
-
-function(add_jar _TARGET_NAME)
-
-    # In CMake < 2.8.12, add_jar used variables which were set prior to calling
-    # add_jar for customizing the behavior of add_jar. In order to be backwards
-    # compatible, check if any of those variables are set, and use them to
-    # initialize values of the named arguments. (Giving the corresponding named
-    # argument will override the value set here.)
-    #
-    # New features should use named arguments only.
-    if(DEFINED CMAKE_JAVA_TARGET_VERSION)
-        set(_add_jar_VERSION "${CMAKE_JAVA_TARGET_VERSION}")
-    endif()
-    if(DEFINED CMAKE_JAVA_TARGET_OUTPUT_DIR)
-        set(_add_jar_OUTPUT_DIR "${CMAKE_JAVA_TARGET_OUTPUT_DIR}")
-    endif()
-    if(DEFINED CMAKE_JAVA_TARGET_OUTPUT_NAME)
-        set(_add_jar_OUTPUT_NAME "${CMAKE_JAVA_TARGET_OUTPUT_NAME}")
-        # reset
-        set(CMAKE_JAVA_TARGET_OUTPUT_NAME)
-    endif()
-    if(DEFINED CMAKE_JAVA_JAR_ENTRY_POINT)
-        set(_add_jar_ENTRY_POINT "${CMAKE_JAVA_JAR_ENTRY_POINT}")
-    endif()
-
-    cmake_parse_arguments(_add_jar
-      ""
-      "VERSION;OUTPUT_DIR;OUTPUT_NAME;ENTRY_POINT;MANIFEST"
-      "SOURCES;INCLUDE_JARS"
-      ${ARGN}
-    )
-
-    set(_JAVA_SOURCE_FILES ${_add_jar_SOURCES} ${_add_jar_UNPARSED_ARGUMENTS})
-
-    if (NOT DEFINED _add_jar_OUTPUT_DIR)
-        set(_add_jar_OUTPUT_DIR ${CMAKE_CURRENT_BINARY_DIR})
-    endif()
-
-    if (_add_jar_ENTRY_POINT)
-        set(_ENTRY_POINT_OPTION e)
-        set(_ENTRY_POINT_VALUE ${_add_jar_ENTRY_POINT})
-    endif ()
-
-    if (_add_jar_MANIFEST)
-        set(_MANIFEST_OPTION m)
-        set(_MANIFEST_VALUE ${_add_jar_MANIFEST})
-    endif ()
-
-    if (LIBRARY_OUTPUT_PATH)
-        set(CMAKE_JAVA_LIBRARY_OUTPUT_PATH ${LIBRARY_OUTPUT_PATH})
-    else ()
-        set(CMAKE_JAVA_LIBRARY_OUTPUT_PATH ${_add_jar_OUTPUT_DIR})
-    endif ()
-
-    set(CMAKE_JAVA_INCLUDE_PATH
-        ${CMAKE_JAVA_INCLUDE_PATH}
-        ${CMAKE_CURRENT_SOURCE_DIR}
-        ${CMAKE_JAVA_OBJECT_OUTPUT_PATH}
-        ${CMAKE_JAVA_LIBRARY_OUTPUT_PATH}
-    )
-
-    if (CMAKE_HOST_WIN32 AND NOT CYGWIN AND CMAKE_HOST_SYSTEM_NAME MATCHES "Windows")
-        set(CMAKE_JAVA_INCLUDE_FLAG_SEP ";")
-    else ()
-        set(CMAKE_JAVA_INCLUDE_FLAG_SEP ":")
-    endif()
-
-    foreach (JAVA_INCLUDE_DIR ${CMAKE_JAVA_INCLUDE_PATH})
-       set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${JAVA_INCLUDE_DIR}")
-    endforeach()
-
-    set(CMAKE_JAVA_CLASS_OUTPUT_PATH "${_add_jar_OUTPUT_DIR}${CMAKE_FILES_DIRECTORY}/${_TARGET_NAME}.dir")
-
-    set(_JAVA_TARGET_OUTPUT_NAME "${_TARGET_NAME}.jar")
-    if (_add_jar_OUTPUT_NAME AND _add_jar_VERSION)
-        set(_JAVA_TARGET_OUTPUT_NAME "${_add_jar_OUTPUT_NAME}-${_add_jar_VERSION}.jar")
-        set(_JAVA_TARGET_OUTPUT_LINK "${_add_jar_OUTPUT_NAME}.jar")
-    elseif (_add_jar_VERSION)
-        set(_JAVA_TARGET_OUTPUT_NAME "${_TARGET_NAME}-${_add_jar_VERSION}.jar")
-        set(_JAVA_TARGET_OUTPUT_LINK "${_TARGET_NAME}.jar")
-    elseif (_add_jar_OUTPUT_NAME)
-        set(_JAVA_TARGET_OUTPUT_NAME "${_add_jar_OUTPUT_NAME}.jar")
-    endif ()
-
-    set(_JAVA_CLASS_FILES)
-    set(_JAVA_COMPILE_FILES)
-    set(_JAVA_DEPENDS)
-    set(_JAVA_COMPILE_DEPENDS)
-    set(_JAVA_RESOURCE_FILES)
-    set(_JAVA_RESOURCE_FILES_RELATIVE)
-    foreach(_JAVA_SOURCE_FILE ${_JAVA_SOURCE_FILES})
-        get_filename_component(_JAVA_EXT ${_JAVA_SOURCE_FILE} EXT)
-        get_filename_component(_JAVA_FILE ${_JAVA_SOURCE_FILE} NAME_WE)
-        get_filename_component(_JAVA_PATH ${_JAVA_SOURCE_FILE} PATH)
-        get_filename_component(_JAVA_FULL ${_JAVA_SOURCE_FILE} ABSOLUTE)
-
-        if (_JAVA_EXT MATCHES ".java")
-            file(RELATIVE_PATH _JAVA_REL_BINARY_PATH ${_add_jar_OUTPUT_DIR} ${_JAVA_FULL})
-            file(RELATIVE_PATH _JAVA_REL_SOURCE_PATH ${CMAKE_CURRENT_SOURCE_DIR} ${_JAVA_FULL})
-            string(LENGTH ${_JAVA_REL_BINARY_PATH} _BIN_LEN)
-            string(LENGTH ${_JAVA_REL_SOURCE_PATH} _SRC_LEN)
-            if (${_BIN_LEN} LESS ${_SRC_LEN})
-                set(_JAVA_REL_PATH ${_JAVA_REL_BINARY_PATH})
-            else ()
-                set(_JAVA_REL_PATH ${_JAVA_REL_SOURCE_PATH})
-            endif ()
-            get_filename_component(_JAVA_REL_PATH ${_JAVA_REL_PATH} PATH)
-
-            list(APPEND _JAVA_COMPILE_FILES ${_JAVA_SOURCE_FILE})
-            set(_JAVA_CLASS_FILE "${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_REL_PATH}/${_JAVA_FILE}.class")
-            set(_JAVA_CLASS_FILES ${_JAVA_CLASS_FILES} ${_JAVA_CLASS_FILE})
-
-        elseif (_JAVA_EXT MATCHES ".jar"
-                OR _JAVA_EXT MATCHES ".war"
-                OR _JAVA_EXT MATCHES ".ear"
-                OR _JAVA_EXT MATCHES ".sar")
-            # Ignored for backward compatibility
-
-        elseif (_JAVA_EXT STREQUAL "")
-            list(APPEND CMAKE_JAVA_INCLUDE_PATH ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}} ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}_CLASSPATH})
-            list(APPEND _JAVA_DEPENDS ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}})
-
-        else ()
-            __java_copy_file(${CMAKE_CURRENT_SOURCE_DIR}/${_JAVA_SOURCE_FILE}
-                             ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE}
-                             "Copying ${_JAVA_SOURCE_FILE} to the build directory")
-            list(APPEND _JAVA_RESOURCE_FILES ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE})
-            list(APPEND _JAVA_RESOURCE_FILES_RELATIVE ${_JAVA_SOURCE_FILE})
-        endif ()
-    endforeach()
-
-    foreach(_JAVA_INCLUDE_JAR ${_add_jar_INCLUDE_JARS})
-        if (TARGET ${_JAVA_INCLUDE_JAR})
-            get_target_property(_JAVA_JAR_PATH ${_JAVA_INCLUDE_JAR} JAR_FILE)
-            if (_JAVA_JAR_PATH)
-                set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_JAR_PATH}")
-                list(APPEND CMAKE_JAVA_INCLUDE_PATH ${_JAVA_JAR_PATH})
-                list(APPEND _JAVA_DEPENDS ${_JAVA_INCLUDE_JAR})
-                list(APPEND _JAVA_COMPILE_DEPENDS ${_JAVA_INCLUDE_JAR})
-            else ()
-                message(SEND_ERROR "add_jar: INCLUDE_JARS target ${_JAVA_INCLUDE_JAR} is not a jar")
-            endif ()
-        else ()
-            set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_INCLUDE_JAR}")
-            list(APPEND CMAKE_JAVA_INCLUDE_PATH "${_JAVA_INCLUDE_JAR}")
-            list(APPEND _JAVA_DEPENDS "${_JAVA_INCLUDE_JAR}")
-            list(APPEND _JAVA_COMPILE_DEPENDS "${_JAVA_INCLUDE_JAR}")
-        endif ()
-    endforeach()
-
-    # create an empty java_class_filelist
-    if (NOT EXISTS ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist)
-        file(WRITE ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist "")
-    endif()
-
-    if (_JAVA_COMPILE_FILES)
-        # Create the list of files to compile.
-        set(_JAVA_SOURCES_FILE ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_sources)
-        string(REPLACE ";" "\"\n\"" _JAVA_COMPILE_STRING "\"${_JAVA_COMPILE_FILES}\"")
-        file(WRITE ${_JAVA_SOURCES_FILE} ${_JAVA_COMPILE_STRING})
-
-        # Compile the java files and create a list of class files
-        add_custom_command(
-            # NOTE: this command generates an artificial dependency file
-            OUTPUT ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_compiled_${_TARGET_NAME}
-            COMMAND ${Java_JAVAC_EXECUTABLE}
-                ${CMAKE_JAVA_COMPILE_FLAGS}
-                -classpath "${CMAKE_JAVA_INCLUDE_PATH_FINAL}"
-                -d ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
-                @${_JAVA_SOURCES_FILE}
-            COMMAND ${CMAKE_COMMAND} -E touch ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_compiled_${_TARGET_NAME}
-            DEPENDS ${_JAVA_COMPILE_FILES} ${_JAVA_COMPILE_DEPENDS}
-            WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-            COMMENT "Building Java objects for ${_TARGET_NAME}.jar"
-        )
-        add_custom_command(
-            OUTPUT ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist
-            COMMAND ${CMAKE_COMMAND}
-                -DCMAKE_JAVA_CLASS_OUTPUT_PATH=${CMAKE_JAVA_CLASS_OUTPUT_PATH}
-                -DCMAKE_JAR_CLASSES_PREFIX="${CMAKE_JAR_CLASSES_PREFIX}"
-                -P ${_JAVA_CLASS_FILELIST_SCRIPT}
-            DEPENDS ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_compiled_${_TARGET_NAME}
-            WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-        )
-    endif ()
-
-    # create the jar file
-    set(_JAVA_JAR_OUTPUT_PATH
-      ${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_NAME})
-    if (CMAKE_JNI_TARGET)
-        add_custom_command(
-            OUTPUT ${_JAVA_JAR_OUTPUT_PATH}
-            COMMAND ${Java_JAR_EXECUTABLE}
-                -cf${_ENTRY_POINT_OPTION}${_MANIFEST_OPTION} ${_JAVA_JAR_OUTPUT_PATH} ${_ENTRY_POINT_VALUE} ${_MANIFEST_VALUE}
-                ${_JAVA_RESOURCE_FILES_RELATIVE} @java_class_filelist
-            COMMAND ${CMAKE_COMMAND}
-                -D_JAVA_TARGET_DIR=${_add_jar_OUTPUT_DIR}
-                -D_JAVA_TARGET_OUTPUT_NAME=${_JAVA_TARGET_OUTPUT_NAME}
-                -D_JAVA_TARGET_OUTPUT_LINK=${_JAVA_TARGET_OUTPUT_LINK}
-                -P ${_JAVA_SYMLINK_SCRIPT}
-            COMMAND ${CMAKE_COMMAND}
-                -D_JAVA_TARGET_DIR=${_add_jar_OUTPUT_DIR}
-                -D_JAVA_TARGET_OUTPUT_NAME=${_JAVA_JAR_OUTPUT_PATH}
-                -D_JAVA_TARGET_OUTPUT_LINK=${_JAVA_TARGET_OUTPUT_LINK}
-                -P ${_JAVA_SYMLINK_SCRIPT}
-            DEPENDS ${_JAVA_RESOURCE_FILES} ${_JAVA_DEPENDS} ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist
-            WORKING_DIRECTORY ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
-            COMMENT "Creating Java archive ${_JAVA_TARGET_OUTPUT_NAME}"
-        )
-    else ()
-        add_custom_command(
-            OUTPUT ${_JAVA_JAR_OUTPUT_PATH}
-            COMMAND ${Java_JAR_EXECUTABLE}
-                -cf${_ENTRY_POINT_OPTION}${_MANIFEST_OPTION} ${_JAVA_JAR_OUTPUT_PATH} ${_ENTRY_POINT_VALUE} ${_MANIFEST_VALUE}
-                ${_JAVA_RESOURCE_FILES_RELATIVE} @java_class_filelist
-            COMMAND ${CMAKE_COMMAND}
-                -D_JAVA_TARGET_DIR=${_add_jar_OUTPUT_DIR}
-                -D_JAVA_TARGET_OUTPUT_NAME=${_JAVA_TARGET_OUTPUT_NAME}
-                -D_JAVA_TARGET_OUTPUT_LINK=${_JAVA_TARGET_OUTPUT_LINK}
-                -P ${_JAVA_SYMLINK_SCRIPT}
-            WORKING_DIRECTORY ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
-            DEPENDS ${_JAVA_RESOURCE_FILES} ${_JAVA_DEPENDS} ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist
-            COMMENT "Creating Java archive ${_JAVA_TARGET_OUTPUT_NAME}"
-        )
-    endif ()
-
-    # Add the target and make sure we have the latest resource files.
-    add_custom_target(${_TARGET_NAME} ALL DEPENDS ${_JAVA_JAR_OUTPUT_PATH})
-
-    set_property(
-        TARGET
-            ${_TARGET_NAME}
-        PROPERTY
-            INSTALL_FILES
-                ${_JAVA_JAR_OUTPUT_PATH}
-    )
-
-    if (_JAVA_TARGET_OUTPUT_LINK)
-        set_property(
-            TARGET
-                ${_TARGET_NAME}
-            PROPERTY
-                INSTALL_FILES
-                    ${_JAVA_JAR_OUTPUT_PATH}
-                    ${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_LINK}
-        )
-
-        if (CMAKE_JNI_TARGET)
-            set_property(
-                TARGET
-                    ${_TARGET_NAME}
-                PROPERTY
-                    JNI_SYMLINK
-                        ${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_LINK}
-            )
-        endif ()
-    endif ()
-
-    set_property(
-        TARGET
-            ${_TARGET_NAME}
-        PROPERTY
-            JAR_FILE
-                ${_JAVA_JAR_OUTPUT_PATH}
-    )
-
-    set_property(
-        TARGET
-            ${_TARGET_NAME}
-        PROPERTY
-            CLASSDIR
-                ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
-    )
-
-endfunction()
-
-function(INSTALL_JAR _TARGET_NAME _DESTINATION)
-    get_property(__FILES
-        TARGET
-            ${_TARGET_NAME}
-        PROPERTY
-            INSTALL_FILES
-    )
-
-    if (__FILES)
-        install(
-            FILES
-                ${__FILES}
-            DESTINATION
-                ${_DESTINATION}
-        )
-    else ()
-        message(SEND_ERROR "The target ${_TARGET_NAME} is not known in this scope.")
-    endif ()
-endfunction()
-
-function(INSTALL_JNI_SYMLINK _TARGET_NAME _DESTINATION)
-    get_property(__SYMLINK
-        TARGET
-            ${_TARGET_NAME}
-        PROPERTY
-            JNI_SYMLINK
-    )
-
-    if (__SYMLINK)
-        install(
-            FILES
-                ${__SYMLINK}
-            DESTINATION
-                ${_DESTINATION}
-        )
-    else ()
-        message(SEND_ERROR "The target ${_TARGET_NAME} is not known in this scope.")
-    endif ()
-endfunction()
-
-function (find_jar VARIABLE)
-    set(_jar_names)
-    set(_jar_files)
-    set(_jar_versions)
-    set(_jar_paths
-        /usr/share/java/
-        /usr/local/share/java/
-        ${Java_JAR_PATHS})
-    set(_jar_doc "NOTSET")
-
-    set(_state "name")
-
-    foreach (arg ${ARGN})
-        if (${_state} STREQUAL "name")
-            if (${arg} STREQUAL "VERSIONS")
-                set(_state "versions")
-            elseif (${arg} STREQUAL "NAMES")
-                set(_state "names")
-            elseif (${arg} STREQUAL "PATHS")
-                set(_state "paths")
-            elseif (${arg} STREQUAL "DOC")
-                set(_state "doc")
-            else ()
-                set(_jar_names ${arg})
-                if (_jar_doc STREQUAL "NOTSET")
-                    set(_jar_doc "Finding ${arg} jar")
-                endif ()
-            endif ()
-        elseif (${_state} STREQUAL "versions")
-            if (${arg} STREQUAL "NAMES")
-                set(_state "names")
-            elseif (${arg} STREQUAL "PATHS")
-                set(_state "paths")
-            elseif (${arg} STREQUAL "DOC")
-                set(_state "doc")
-            else ()
-                set(_jar_versions ${_jar_versions} ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "names")
-            if (${arg} STREQUAL "VERSIONS")
-                set(_state "versions")
-            elseif (${arg} STREQUAL "PATHS")
-                set(_state "paths")
-            elseif (${arg} STREQUAL "DOC")
-                set(_state "doc")
-            else ()
-                set(_jar_names ${_jar_names} ${arg})
-                if (_jar_doc STREQUAL "NOTSET")
-                    set(_jar_doc "Finding ${arg} jar")
-                endif ()
-            endif ()
-        elseif (${_state} STREQUAL "paths")
-            if (${arg} STREQUAL "VERSIONS")
-                set(_state "versions")
-            elseif (${arg} STREQUAL "NAMES")
-                set(_state "names")
-            elseif (${arg} STREQUAL "DOC")
-                set(_state "doc")
-            else ()
-                set(_jar_paths ${_jar_paths} ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "doc")
-            if (${arg} STREQUAL "VERSIONS")
-                set(_state "versions")
-            elseif (${arg} STREQUAL "NAMES")
-                set(_state "names")
-            elseif (${arg} STREQUAL "PATHS")
-                set(_state "paths")
-            else ()
-                set(_jar_doc ${arg})
-            endif ()
-        endif ()
-    endforeach ()
-
-    if (NOT _jar_names)
-        message(FATAL_ERROR "find_jar: No name to search for given")
-    endif ()
-
-    foreach (jar_name ${_jar_names})
-        foreach (version ${_jar_versions})
-            set(_jar_files ${_jar_files} ${jar_name}-${version}.jar)
-        endforeach ()
-        set(_jar_files ${_jar_files} ${jar_name}.jar)
-    endforeach ()
-
-    find_file(${VARIABLE}
-        NAMES   ${_jar_files}
-        PATHS   ${_jar_paths}
-        DOC     ${_jar_doc}
-        NO_DEFAULT_PATH)
-endfunction ()
-
-function(create_javadoc _target)
-    set(_javadoc_packages)
-    set(_javadoc_files)
-    set(_javadoc_sourcepath)
-    set(_javadoc_classpath)
-    set(_javadoc_installpath "${CMAKE_INSTALL_PREFIX}/share/javadoc")
-    set(_javadoc_doctitle)
-    set(_javadoc_windowtitle)
-    set(_javadoc_author FALSE)
-    set(_javadoc_version FALSE)
-    set(_javadoc_use FALSE)
-
-    set(_state "package")
-
-    foreach (arg ${ARGN})
-        if (${_state} STREQUAL "package")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                set(_javadoc_packages ${arg})
-                set(_state "packages")
-            endif ()
-        elseif (${_state} STREQUAL "packages")
-            if (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                list(APPEND _javadoc_packages ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "files")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                list(APPEND _javadoc_files ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "sourcepath")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                list(APPEND _javadoc_sourcepath ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "classpath")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                list(APPEND _javadoc_classpath ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "installpath")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                set(_javadoc_installpath ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "doctitle")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                set(_javadoc_doctitle ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "windowtitle")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                set(_javadoc_windowtitle ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "author")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                set(_javadoc_author ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "use")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                set(_javadoc_use ${arg})
-            endif ()
-        elseif (${_state} STREQUAL "version")
-            if (${arg} STREQUAL "PACKAGES")
-                set(_state "packages")
-            elseif (${arg} STREQUAL "FILES")
-                set(_state "files")
-            elseif (${arg} STREQUAL "SOURCEPATH")
-                set(_state "sourcepath")
-            elseif (${arg} STREQUAL "CLASSPATH")
-                set(_state "classpath")
-            elseif (${arg} STREQUAL "INSTALLPATH")
-                set(_state "installpath")
-            elseif (${arg} STREQUAL "DOCTITLE")
-                set(_state "doctitle")
-            elseif (${arg} STREQUAL "WINDOWTITLE")
-                set(_state "windowtitle")
-            elseif (${arg} STREQUAL "AUTHOR")
-                set(_state "author")
-            elseif (${arg} STREQUAL "USE")
-                set(_state "use")
-            elseif (${arg} STREQUAL "VERSION")
-                set(_state "version")
-            else ()
-                set(_javadoc_version ${arg})
-            endif ()
-        endif ()
-    endforeach ()
-
-    set(_javadoc_builddir ${CMAKE_CURRENT_BINARY_DIR}/javadoc/${_target})
-    set(_javadoc_options -d ${_javadoc_builddir})
-
-    if (_javadoc_sourcepath)
-        set(_start TRUE)
-        foreach(_path ${_javadoc_sourcepath})
-            if (_start)
-                set(_sourcepath ${_path})
-                set(_start FALSE)
-            else ()
-                set(_sourcepath ${_sourcepath}:${_path})
-            endif ()
-        endforeach()
-        set(_javadoc_options ${_javadoc_options} -sourcepath ${_sourcepath})
-    endif ()
-
-    if (_javadoc_classpath)
-        set(_start TRUE)
-        foreach(_path ${_javadoc_classpath})
-            if (_start)
-                set(_classpath ${_path})
-                set(_start FALSE)
-            else ()
-                set(_classpath ${_classpath}:${_path})
-            endif ()
-        endforeach()
-        set(_javadoc_options ${_javadoc_options} -classpath "${_classpath}")
-    endif ()
-
-    if (_javadoc_doctitle)
-        set(_javadoc_options ${_javadoc_options} -doctitle '${_javadoc_doctitle}')
-    endif ()
-
-    if (_javadoc_windowtitle)
-        set(_javadoc_options ${_javadoc_options} -windowtitle '${_javadoc_windowtitle}')
-    endif ()
-
-    if (_javadoc_author)
-        set(_javadoc_options ${_javadoc_options} -author)
-    endif ()
-
-    if (_javadoc_use)
-        set(_javadoc_options ${_javadoc_options} -use)
-    endif ()
-
-    if (_javadoc_version)
-        set(_javadoc_options ${_javadoc_options} -version)
-    endif ()
-
-    add_custom_target(${_target}_javadoc ALL
-        COMMAND ${Java_JAVADOC_EXECUTABLE} ${_javadoc_options}
-                            ${_javadoc_files}
-                            ${_javadoc_packages}
-        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-    )
-
-    install(
-        DIRECTORY ${_javadoc_builddir}
-        DESTINATION ${_javadoc_installpath}
-    )
-endfunction()
diff --git a/share/cmake-3.2/Modules/UseSWIG.cmake b/share/cmake-3.2/Modules/UseSWIG.cmake
deleted file mode 100644
index 7939b1f..0000000
--- a/share/cmake-3.2/Modules/UseSWIG.cmake
+++ /dev/null
@@ -1,301 +0,0 @@
-#.rst:
-# UseSWIG
-# -------
-#
-# Defines the following macros for use with SWIG:
-#
-# ::
-#
-#    SWIG_ADD_MODULE(name language [ files ])
-#      - Define swig module with given name and specified language
-#    SWIG_LINK_LIBRARIES(name [ libraries ])
-#      - Link libraries to swig module
-#
-# Source files properties on module files can be set before the invocation
-# of the SWIG_ADD_MODULE macro to specify special behavior of SWIG.
-#
-# The source file property CPLUSPLUS calls SWIG in c++ mode, e.g.::
-#
-#    set_property(SOURCE mymod.i PROPERTY CPLUSPLUS ON)
-#    swig_add_module(mymod python mymod.i)
-#
-# The source file property SWIG_FLAGS adds custom flags to the SWIG executable.
-#
-# The source-file property SWIG_MODULE_NAME have to be provided to specify the actual
-# import name of the module in the target language if it cannot be scanned automatically
-# from source or different from the module file basename.::
-#
-#    set_property(SOURCE mymod.i PROPERTY SWIG_MODULE_NAME mymod_realname)
-#
-# To get the name of the swig module target library, use: ${SWIG_MODULE_${name}_REAL_NAME}.
-#
-# Also some variables can be set to specify special behavior of SWIG.
-#
-# CMAKE_SWIG_FLAGS can be used to add special flags to all swig calls.
-#
-# Another special variable is CMAKE_SWIG_OUTDIR, it allows one to specify
-# where to write all the swig generated module (swig -outdir option)
-#
-# The name-specific variable SWIG_MODULE_<name>_EXTRA_DEPS may be used to specify extra
-# dependencies for the generated modules.
-#
-# If the source file generated by swig need some special flag you can use::
-#
-#    set_source_files_properties( ${swig_generated_file_fullname}
-#                                 PROPERTIES COMPILE_FLAGS "-bla")
-
-#=============================================================================
-# Copyright 2004-2009 Kitware, Inc.
-# Copyright 2009 Mathieu Malaterre <mathieu.malaterre@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-set(SWIG_CXX_EXTENSION "cxx")
-set(SWIG_EXTRA_LIBRARIES "")
-
-set(SWIG_PYTHON_EXTRA_FILE_EXTENSION "py")
-
-#
-# For given swig module initialize variables associated with it
-#
-macro(SWIG_MODULE_INITIALIZE name language)
-  string(TOUPPER "${language}" swig_uppercase_language)
-  string(TOLOWER "${language}" swig_lowercase_language)
-  set(SWIG_MODULE_${name}_LANGUAGE "${swig_uppercase_language}")
-  set(SWIG_MODULE_${name}_SWIG_LANGUAGE_FLAG "${swig_lowercase_language}")
-
-  set(SWIG_MODULE_${name}_REAL_NAME "${name}")
-  if (";${CMAKE_SWIG_FLAGS};" MATCHES ";-noproxy;")
-    set (SWIG_MODULE_${name}_NOPROXY TRUE)
-  endif ()
-  if("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xUNKNOWN")
-    message(FATAL_ERROR "SWIG Error: Language \"${language}\" not found")
-  elseif("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xPYTHON" AND NOT SWIG_MODULE_${name}_NOPROXY)
-    # swig will produce a module.py containing an 'import _modulename' statement,
-    # which implies having a corresponding _modulename.so (*NIX), _modulename.pyd (Win32),
-    # unless the -noproxy flag is used
-    set(SWIG_MODULE_${name}_REAL_NAME "_${name}")
-  elseif("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xPERL")
-    set(SWIG_MODULE_${name}_EXTRA_FLAGS "-shadow")
-  elseif("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xCSHARP")
-    # This makes sure that the name used in the generated DllImport
-    # matches the library name created by CMake
-    set(SWIG_MODULE_${name}_EXTRA_FLAGS "-dllimport;${name}")
-  endif()
-endmacro()
-
-#
-# For a given language, input file, and output file, determine extra files that
-# will be generated. This is internal swig macro.
-#
-
-macro(SWIG_GET_EXTRA_OUTPUT_FILES language outfiles generatedpath infile)
-  set(${outfiles} "")
-  get_source_file_property(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename
-    ${infile} SWIG_MODULE_NAME)
-  if(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename STREQUAL "NOTFOUND")
-
-    # try to get module name from "%module foo" syntax
-    if ( EXISTS ${infile} )
-      file ( STRINGS ${infile} _MODULE_NAME REGEX "[ ]*%module[ ]*[a-zA-Z0-9_]+.*" )
-    endif ()
-    if ( _MODULE_NAME )
-      string ( REGEX REPLACE "[ ]*%module[ ]*([a-zA-Z0-9_]+).*" "\\1" _MODULE_NAME "${_MODULE_NAME}" )
-      set(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename "${_MODULE_NAME}")
-
-    else ()
-      # try to get module name from "%module (options=...) foo" syntax
-      if ( EXISTS ${infile} )
-        file ( STRINGS ${infile} _MODULE_NAME REGEX "[ ]*%module[ ]*\\(.*\\)[ ]*[a-zA-Z0-9_]+.*" )
-      endif ()
-      if ( _MODULE_NAME )
-        string ( REGEX REPLACE "[ ]*%module[ ]*\\(.*\\)[ ]*([a-zA-Z0-9_]+).*" "\\1" _MODULE_NAME "${_MODULE_NAME}" )
-        set(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename "${_MODULE_NAME}")
-
-      else ()
-        # fallback to file basename
-        get_filename_component(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename ${infile} NAME_WE)
-      endif ()
-    endif ()
-
-  endif()
-  foreach(it ${SWIG_${language}_EXTRA_FILE_EXTENSION})
-    set(${outfiles} ${${outfiles}}
-      "${generatedpath}/${SWIG_GET_EXTRA_OUTPUT_FILES_module_basename}.${it}")
-  endforeach()
-endmacro()
-
-#
-# Take swig (*.i) file and add proper custom commands for it
-#
-macro(SWIG_ADD_SOURCE_TO_MODULE name outfiles infile)
-  set(swig_full_infile ${infile})
-  get_filename_component(swig_source_file_name_we "${infile}" NAME_WE)
-  get_source_file_property(swig_source_file_generated ${infile} GENERATED)
-  get_source_file_property(swig_source_file_cplusplus ${infile} CPLUSPLUS)
-  get_source_file_property(swig_source_file_flags ${infile} SWIG_FLAGS)
-  if("${swig_source_file_flags}" STREQUAL "NOTFOUND")
-    set(swig_source_file_flags "")
-  endif()
-  get_filename_component(swig_source_file_fullname "${infile}" ABSOLUTE)
-
-  # If CMAKE_SWIG_OUTDIR was specified then pass it to -outdir
-  if(CMAKE_SWIG_OUTDIR)
-    set(swig_outdir ${CMAKE_SWIG_OUTDIR})
-  else()
-    set(swig_outdir ${CMAKE_CURRENT_BINARY_DIR})
-  endif()
-  SWIG_GET_EXTRA_OUTPUT_FILES(${SWIG_MODULE_${name}_LANGUAGE}
-    swig_extra_generated_files
-    "${swig_outdir}"
-    "${infile}")
-  set(swig_generated_file_fullname
-    "${swig_outdir}/${swig_source_file_name_we}")
-  # add the language into the name of the file (i.e. TCL_wrap)
-  # this allows for the same .i file to be wrapped into different languages
-  set(swig_generated_file_fullname
-    "${swig_generated_file_fullname}${SWIG_MODULE_${name}_LANGUAGE}_wrap")
-
-  if(swig_source_file_cplusplus)
-    set(swig_generated_file_fullname
-      "${swig_generated_file_fullname}.${SWIG_CXX_EXTENSION}")
-  else()
-    set(swig_generated_file_fullname
-      "${swig_generated_file_fullname}.c")
-  endif()
-
-  #message("Full path to source file: ${swig_source_file_fullname}")
-  #message("Full path to the output file: ${swig_generated_file_fullname}")
-  get_directory_property(cmake_include_directories INCLUDE_DIRECTORIES)
-  list(REMOVE_DUPLICATES cmake_include_directories)
-  set(swig_include_dirs)
-  foreach(it ${cmake_include_directories})
-    set(swig_include_dirs ${swig_include_dirs} "-I${it}")
-  endforeach()
-
-  set(swig_special_flags)
-  # default is c, so add c++ flag if it is c++
-  if(swig_source_file_cplusplus)
-    set(swig_special_flags ${swig_special_flags} "-c++")
-  endif()
-  set(swig_extra_flags)
-  if(SWIG_MODULE_${name}_EXTRA_FLAGS)
-    set(swig_extra_flags ${swig_extra_flags} ${SWIG_MODULE_${name}_EXTRA_FLAGS})
-  endif()
-  add_custom_command(
-    OUTPUT "${swig_generated_file_fullname}" ${swig_extra_generated_files}
-    # Let's create the ${swig_outdir} at execution time, in case dir contains $(OutDir)
-    COMMAND ${CMAKE_COMMAND} -E make_directory ${swig_outdir}
-    COMMAND "${SWIG_EXECUTABLE}"
-    ARGS "-${SWIG_MODULE_${name}_SWIG_LANGUAGE_FLAG}"
-    ${swig_source_file_flags}
-    ${CMAKE_SWIG_FLAGS}
-    -outdir ${swig_outdir}
-    ${swig_special_flags}
-    ${swig_extra_flags}
-    ${swig_include_dirs}
-    -o "${swig_generated_file_fullname}"
-    "${swig_source_file_fullname}"
-    MAIN_DEPENDENCY "${swig_source_file_fullname}"
-    DEPENDS ${SWIG_MODULE_${name}_EXTRA_DEPS}
-    COMMENT "Swig source")
-  set_source_files_properties("${swig_generated_file_fullname}" ${swig_extra_generated_files}
-    PROPERTIES GENERATED 1)
-  set(${outfiles} "${swig_generated_file_fullname}" ${swig_extra_generated_files})
-endmacro()
-
-#
-# Create Swig module
-#
-macro(SWIG_ADD_MODULE name language)
-  SWIG_MODULE_INITIALIZE(${name} ${language})
-  set(swig_dot_i_sources)
-  set(swig_other_sources)
-  foreach(it ${ARGN})
-    if(${it} MATCHES "\\.i$")
-      set(swig_dot_i_sources ${swig_dot_i_sources} "${it}")
-    else()
-      set(swig_other_sources ${swig_other_sources} "${it}")
-    endif()
-  endforeach()
-
-  set(swig_generated_sources)
-  foreach(it ${swig_dot_i_sources})
-    SWIG_ADD_SOURCE_TO_MODULE(${name} swig_generated_source ${it})
-    set(swig_generated_sources ${swig_generated_sources} "${swig_generated_source}")
-  endforeach()
-  get_directory_property(swig_extra_clean_files ADDITIONAL_MAKE_CLEAN_FILES)
-  set_directory_properties(PROPERTIES
-    ADDITIONAL_MAKE_CLEAN_FILES "${swig_extra_clean_files};${swig_generated_sources}")
-  add_library(${SWIG_MODULE_${name}_REAL_NAME}
-    MODULE
-    ${swig_generated_sources}
-    ${swig_other_sources})
-  set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES NO_SONAME ON)
-  string(TOLOWER "${language}" swig_lowercase_language)
-  if ("${swig_lowercase_language}" STREQUAL "octave")
-    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
-    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".oct")
-  elseif ("${swig_lowercase_language}" STREQUAL "go")
-    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
-  elseif ("${swig_lowercase_language}" STREQUAL "java")
-    if (APPLE)
-        # In java you want:
-        #      System.loadLibrary("LIBRARY");
-        # then JNI will look for a library whose name is platform dependent, namely
-        #   MacOS  : libLIBRARY.jnilib
-        #   Windows: LIBRARY.dll
-        #   Linux  : libLIBRARY.so
-        set_target_properties (${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".jnilib")
-      endif ()
-  elseif ("${swig_lowercase_language}" STREQUAL "lua")
-    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
-  elseif ("${swig_lowercase_language}" STREQUAL "python")
-    # this is only needed for the python case where a _modulename.so is generated
-    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
-    # Python extension modules on Windows must have the extension ".pyd"
-    # instead of ".dll" as of Python 2.5.  Older python versions do support
-    # this suffix.
-    # http://docs.python.org/whatsnew/ports.html#SECTION0001510000000000000000
-    # <quote>
-    # Windows: .dll is no longer supported as a filename extension for extension modules.
-    # .pyd is now the only filename extension that will be searched for.
-    # </quote>
-    if(WIN32 AND NOT CYGWIN)
-      set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".pyd")
-    endif()
-  elseif ("${swig_lowercase_language}" STREQUAL "r")
-    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
-  elseif ("${swig_lowercase_language}" STREQUAL "ruby")
-    # In ruby you want:
-    #      require 'LIBRARY'
-    # then ruby will look for a library whose name is platform dependent, namely
-    #   MacOS  : LIBRARY.bundle
-    #   Windows: LIBRARY.dll
-    #   Linux  : LIBRARY.so
-    set_target_properties (${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
-    if (APPLE)
-      set_target_properties (${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".bundle")
-    endif ()
-  endif ()
-endmacro()
-
-#
-# Like TARGET_LINK_LIBRARIES but for swig modules
-#
-macro(SWIG_LINK_LIBRARIES name)
-  if(SWIG_MODULE_${name}_REAL_NAME)
-    target_link_libraries(${SWIG_MODULE_${name}_REAL_NAME} ${ARGN})
-  else()
-    message(SEND_ERROR "Cannot find Swig library \"${name}\".")
-  endif()
-endmacro()
-
diff --git a/share/cmake-3.2/Modules/UseVTK40.cmake b/share/cmake-3.2/Modules/UseVTK40.cmake
deleted file mode 100644
index d6bdaaa..0000000
--- a/share/cmake-3.2/Modules/UseVTK40.cmake
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This is an implementation detail for using VTK 4.0 with the
-# FindVTK.cmake module.  Do not include directly by name.  This should
-# be included only when FindVTK.cmake sets the VTK_USE_FILE variable
-# to point here.
-
-# Add compiler flags needed to use VTK.
-set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${VTK_REQUIRED_C_FLAGS}")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${VTK_REQUIRED_CXX_FLAGS}")
-
-# Add include directories needed to use VTK.
-include_directories(${VTK_INCLUDE_DIRS})
-
-# Add link directories needed to use VTK.
-link_directories(${VTK_LIBRARY_DIRS})
diff --git a/share/cmake-3.2/Modules/UseVTKBuildSettings40.cmake b/share/cmake-3.2/Modules/UseVTKBuildSettings40.cmake
deleted file mode 100644
index 474f67c..0000000
--- a/share/cmake-3.2/Modules/UseVTKBuildSettings40.cmake
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# Implementation detail for FindVTK.cmake to let it provide a
-# VTK_BUILD_SETTINGS_FILE for VTK 4.0.
-
-set(CMAKE_BUILD_SETTING_CMAKE_MAJOR_VERSION "${VTK40_CMAKE_MAJOR_VERSION}")
-set(CMAKE_BUILD_SETTING_CMAKE_MINOR_VERSION "${VTK40_CMAKE_MINOR_VERSION}")
-set(CMAKE_BUILD_SETTING_PROJECT_NAME "VTK")
-
-set(CMAKE_BUILD_SETTING_C_COMPILER "${VTK40_CMAKE_C_COMPILER}")
-set(CMAKE_BUILD_SETTING_C_FLAGS "${VTK40_CMAKE_C_FLAGS}")
-set(CMAKE_BUILD_SETTING_C_FLAGS_DEBUG "${VTK40_CMAKE_C_FLAGS_DEBUG}")
-set(CMAKE_BUILD_SETTING_C_FLAGS_RELEASE "${VTK40_CMAKE_C_FLAGS_RELEASE}")
-set(CMAKE_BUILD_SETTING_C_FLAGS_MINSIZEREL "${VTK40_CMAKE_C_FLAGS_MINSIZEREL}")
-set(CMAKE_BUILD_SETTING_C_FLAGS_RELWITHDEBINFO "${VTK40_CMAKE_C_FLAGS_RELWITHDEBINFO}")
-
-set(CMAKE_BUILD_SETTING_CXX_COMPILER "${VTK40_CMAKE_CXX_COMPILER}")
-set(CMAKE_BUILD_SETTING_CXX_FLAGS "${VTK40_CMAKE_CXX_FLAGS}")
-set(CMAKE_BUILD_SETTING_CXX_FLAGS_DEBUG "${VTK40_CMAKE_CXX_FLAGS_DEBUG}")
-set(CMAKE_BUILD_SETTING_CXX_FLAGS_RELEASE "${VTK40_CMAKE_CXX_FLAGS_RELEASE}")
-set(CMAKE_BUILD_SETTING_CXX_FLAGS_MINSIZEREL "${VTK40_CMAKE_CXX_FLAGS_MINSIZEREL}")
-set(CMAKE_BUILD_SETTING_CXX_FLAGS_RELWITHDEBINFO "${VTK40_CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
-
-set(CMAKE_BUILD_SETTING_BUILD_TYPE "${VTK40_CMAKE_BUILD_TYPE}")
-set(CMAKE_BUILD_SETTING_BUILD_TOOL "${VTK40_CMAKE_BUILD_TOOL}")
diff --git a/share/cmake-3.2/Modules/UseVTKConfig40.cmake b/share/cmake-3.2/Modules/UseVTKConfig40.cmake
deleted file mode 100644
index c5022e4..0000000
--- a/share/cmake-3.2/Modules/UseVTKConfig40.cmake
+++ /dev/null
@@ -1,409 +0,0 @@
-#
-
-#=============================================================================
-# Copyright 2002-2009 Kitware, Inc.
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-# This is an implementation detail for using VTK 4.0 with the
-# FindVTK.cmake module.  Do not include directly.
-
-# Hard-code the version number since it isn't provided by VTK 4.0.
-set(VTK_MAJOR_VERSION 4)
-set(VTK_MINOR_VERSION 0)
-set(VTK_BUILD_VERSION 2)
-
-# Provide a new UseVTK file that doesn't do a full LOAD_CACHE.
-set(VTK_USE_FILE ${CMAKE_ROOT}/Modules/UseVTK40.cmake)
-
-# Provide a build settings file.
-set(VTK_BUILD_SETTINGS_FILE ${CMAKE_ROOT}/Modules/UseVTKBuildSettings40.cmake)
-
-# There are no CMake extensions for VTK 4.0.
-set(VTK_CMAKE_EXTENSIONS_DIR "")
-
-# grep "VTK40_" UseVTKConfig40.cmake |sed 's/.*VTK40_\([A-Za-z0-9_]*\).*/  \1/'
-load_cache(${VTK_DIR} READ_WITH_PREFIX VTK40_
-  BUILD_SHARED_LIBS
-  CMAKE_BUILD_TOOL
-  CMAKE_BUILD_TYPE
-  CMAKE_CACHE_MAJOR_VERSION
-  CMAKE_CACHE_MINOR_VERSION
-  CMAKE_CXX_COMPILER
-  CMAKE_CXX_FLAGS
-  CMAKE_CXX_FLAGS_DEBUG
-  CMAKE_CXX_FLAGS_MINSIZEREL
-  CMAKE_CXX_FLAGS_RELEASE
-  CMAKE_CXX_FLAGS_RELWITHDEBINFO
-  CMAKE_C_COMPILER
-  CMAKE_C_FLAGS
-  CMAKE_C_FLAGS_DEBUG
-  CMAKE_C_FLAGS_MINSIZEREL
-  CMAKE_C_FLAGS_RELEASE
-  CMAKE_C_FLAGS_RELWITHDEBINFO
-  CMAKE_INSTALL_PREFIX
-  CMAKE_Xutil_INCLUDE_PATH
-  EXECUTABLE_OUTPUT_PATH
-  JAVA_INCLUDE_PATH2
-  LIBRARY_OUTPUT_PATH
-  MPIRUN
-  MPI_INCLUDE_PATH
-  MPI_POSTFLAGS
-  MPI_PREFLAGS
-  OPENGL_INCLUDE_DIR
-  OSMESA_INCLUDE_PATH
-  PYTHON_INCLUDE_PATH
-  TCL_INCLUDE_PATH
-  VLI_INCLUDE_PATH_FOR_VG500
-  VLI_INCLUDE_PATH_FOR_VP1000
-  VTK_BINARY_DIR
-  VTK_DEBUG_LEAKS
-  VTK_HAVE_VG500
-  VTK_HAVE_VP1000
-  VTK_MANGLE_MESA
-  VTK_OPENGL_HAS_OSMESA
-  VTK_PARSE_JAVA_EXE
-  VTK_SOURCE_DIR
-  VTK_USE_64BIT_IDS
-  VTK_USE_ANSI_STDLIB
-  VTK_USE_HYBRID
-  VTK_USE_MATROX_IMAGING
-  VTK_USE_MPI
-  VTK_USE_PARALLEL
-  VTK_USE_PATENTED
-  VTK_USE_RENDERING
-  VTK_USE_VIDEO_FOR_WINDOWS
-  VTK_USE_VOLUMEPRO
-  VTK_USE_X
-  VTK_WRAP_JAVA
-  VTK_WRAP_JAVA_EXE
-  VTK_WRAP_PYTHON
-  VTK_WRAP_PYTHON_EXE
-  VTK_WRAP_TCL
-  VTK_WRAP_TCL_EXE
-  vtkCommonJava_LIB_DEPENDS
-  vtkCommonPython_LIB_DEPENDS
-  vtkCommonTCL_LIB_DEPENDS
-  vtkCommon_LIB_DEPENDS
-  vtkFilteringJava_LIB_DEPENDS
-  vtkFilteringPython_LIB_DEPENDS
-  vtkFilteringTCL_LIB_DEPENDS
-  vtkFiltering_LIB_DEPENDS
-  vtkGraphicsJava_LIB_DEPENDS
-  vtkGraphicsPython_LIB_DEPENDS
-  vtkGraphicsTCL_LIB_DEPENDS
-  vtkGraphics_LIB_DEPENDS
-  vtkHybridJava_LIB_DEPENDS
-  vtkHybridPython_LIB_DEPENDS
-  vtkHybridTCL_LIB_DEPENDS
-  vtkHybrid_LIB_DEPENDS
-  vtkIOJava_LIB_DEPENDS
-  vtkIOPython_LIB_DEPENDS
-  vtkIOTCL_LIB_DEPENDS
-  vtkIO_LIB_DEPENDS
-  vtkImagingJava_LIB_DEPENDS
-  vtkImagingPython_LIB_DEPENDS
-  vtkImagingTCL_LIB_DEPENDS
-  vtkImaging_LIB_DEPENDS
-  vtkParallelJava_LIB_DEPENDS
-  vtkParallelPython_LIB_DEPENDS
-  vtkParallelTCL_LIB_DEPENDS
-  vtkParallel_LIB_DEPENDS
-  vtkPatentedJava_LIB_DEPENDS
-  vtkPatentedPython_LIB_DEPENDS
-  vtkPatentedTCL_LIB_DEPENDS
-  vtkPatented_LIB_DEPENDS
-  vtkRenderingJava_LIB_DEPENDS
-  vtkRenderingPythonTkWidgets_LIB_DEPENDS
-  vtkRenderingPython_LIB_DEPENDS
-  vtkRenderingTCL_LIB_DEPENDS
-  vtkRendering_LIB_DEPENDS
-  vtkjpeg_LIB_DEPENDS
-  vtkpng_LIB_DEPENDS
-  vtkzlib_LIB_DEPENDS
-)
-
-# Copy needed settings from the VTK 4.0 cache.
-set(VTK_BUILD_SHARED ${VTK40_BUILD_SHARED_LIBS})
-set(VTK_DEBUG_LEAKS ${VTK40_VTK_DEBUG_LEAKS})
-set(VTK_HAVE_VG500 ${VTK40_VTK_HAVE_VG500})
-set(VTK_HAVE_VP1000 ${VTK40_VTK_HAVE_VP1000})
-set(VTK_USE_MANGLED_MESA ${VTK40_VTK_MANGLE_MESA})
-set(VTK_MPIRUN_EXE ${VTK40_MPIRUN})
-set(VTK_MPI_POSTFLAGS ${VTK40_MPI_POSTFLAGS})
-set(VTK_MPI_PREFLAGS ${VTK40_MPI_PREFLAGS})
-set(VTK_OPENGL_HAS_OSMESA ${VTK40_VTK_OPENGL_HAS_OSMESA})
-set(VTK_USE_64BIT_IDS ${VTK40_VTK_USE_64BIT_IDS})
-set(VTK_USE_ANSI_STDLIB ${VTK40_VTK_USE_ANSI_STDLIB})
-set(VTK_USE_HYBRID ${VTK40_VTK_USE_HYBRID})
-set(VTK_USE_MATROX_IMAGING ${VTK40_VTK_USE_MATROX_IMAGING})
-set(VTK_USE_MPI ${VTK40_VTK_USE_MPI})
-set(VTK_USE_PARALLEL ${VTK40_VTK_USE_PARALLEL})
-set(VTK_USE_PATENTED ${VTK40_VTK_USE_PATENTED})
-set(VTK_USE_RENDERING ${VTK40_VTK_USE_RENDERING})
-set(VTK_USE_VIDEO_FOR_WINDOWS ${VTK40_VTK_USE_VIDEO_FOR_WINDOWS})
-set(VTK_USE_VOLUMEPRO ${VTK40_VTK_USE_VOLUMEPRO})
-set(VTK_USE_X ${VTK40_VTK_USE_X})
-set(VTK_WRAP_JAVA ${VTK40_VTK_WRAP_JAVA})
-set(VTK_WRAP_PYTHON ${VTK40_VTK_WRAP_PYTHON})
-set(VTK_WRAP_TCL ${VTK40_VTK_WRAP_TCL})
-
-# Create the list of available kits.
-set(VTK_KITS COMMON FILTERING GRAPHICS IMAGING IO)
-if(VTK_USE_RENDERING)
-  set(VTK_KITS ${VTK_KITS} RENDERING)
-endif()
-if(VTK_USE_HYBRID)
-  set(VTK_KITS ${VTK_KITS} HYBRID)
-endif()
-if(VTK_USE_PARALLEL)
-  set(VTK_KITS ${VTK_KITS} PARALLEL)
-endif()
-if(VTK_USE_PATENTED)
-  set(VTK_KITS ${VTK_KITS} PATENTED)
-endif()
-
-# Create the list of available languages.
-set(VTK_LANGUAGES "")
-if(VTK_WRAP_TCL)
-  set(VTK_LANGUAGES ${VTK_LANGUAGES} TCL)
-endif()
-if(VTK_WRAP_PYTHON)
-  set(VTK_LANGUAGES ${VTK_LANGUAGES} PYTHON)
-endif()
-if(VTK_WRAP_JAVA)
-  set(VTK_LANGUAGES ${VTK_LANGUAGES} JAVA)
-endif()
-
-# Include directories for other projects installed on the system and
-# used by VTK.
-set(VTK_INCLUDE_DIRS_SYS "")
-if(VTK_USE_RENDERING)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS}
-      ${VTK40_OPENGL_INCLUDE_PATH} ${VTK40_OPENGL_INCLUDE_DIR})
-  if(VTK_USE_X)
-    set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS}
-        ${VTK40_CMAKE_Xlib_INCLUDE_PATH} ${VTK40_CMAKE_Xutil_INCLUDE_PATH})
-  endif()
-endif()
-
-if(VTK_OPENGL_HAS_OSMESA)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS}
-      ${VTK40_OSMESA_INCLUDE_PATH})
-endif()
-
-if(VTK_USE_MPI)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS} ${VTK40_MPI_INCLUDE_PATH})
-endif()
-
-if(VTK_WRAP_TCL)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS} ${VTK40_TCL_INCLUDE_PATH})
-endif()
-
-if(VTK_WRAP_PYTHON)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS} ${VTK40_PYTHON_INCLUDE_PATH})
-endif()
-
-if(VTK_WRAP_JAVA)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS}
-      ${VTK40_JAVA_INCLUDE_PATH} ${VTK40_JAVA_INCLUDE_PATH2})
-endif()
-
-if(VTK_HAVE_VG500)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS}
-      ${VTK40_VLI_INCLUDE_PATH_FOR_VG500})
-endif()
-
-if(VTK_HAVE_VP1000)
-  set(VTK_INCLUDE_DIRS_SYS ${VTK_INCLUDE_DIRS_SYS}
-      ${VTK40_VLI_INCLUDE_PATH_FOR_VP1000})
-endif()
-
-# See if this is a build tree or install tree.
-if(EXISTS ${VTK_DIR}/Common)
-  # This is a VTK 4.0 build tree.
-
-  set(VTK_LIBRARY_DIRS ${VTK40_LIBRARY_OUTPUT_PATH})
-
-  # Determine the include directories needed.
-  set(VTK_INCLUDE_DIRS ${VTK40_VTK_BINARY_DIR})
-  if(VTK_USE_PARALLEL)
-    set(VTK_INCLUDE_DIRS ${VTK_INCLUDE_DIRS} ${VTK40_VTK_SOURCE_DIR}/Parallel)
-  endif()
-  if(VTK_USE_HYBRID)
-    set(VTK_INCLUDE_DIRS ${VTK_INCLUDE_DIRS} ${VTK40_VTK_SOURCE_DIR}/Hybrid)
-  endif()
-  if(VTK_USE_PATENTED)
-    set(VTK_INCLUDE_DIRS ${VTK_INCLUDE_DIRS} ${VTK40_VTK_SOURCE_DIR}/Patented)
-  endif()
-  if(VTK_USE_RENDERING)
-    set(VTK_INCLUDE_DIRS ${VTK_INCLUDE_DIRS} ${VTK40_VTK_SOURCE_DIR}/Rendering)
-  endif()
-
-  # These directories are always needed.
-  set(VTK_INCLUDE_DIRS ${VTK_INCLUDE_DIRS}
-    ${VTK40_VTK_SOURCE_DIR}/IO
-    ${VTK40_VTK_SOURCE_DIR}/Imaging
-    ${VTK40_VTK_SOURCE_DIR}/Graphics
-    ${VTK40_VTK_SOURCE_DIR}/Filtering
-    ${VTK40_VTK_SOURCE_DIR}/Common)
-
-  # Give access to a few utilities.
-  set(VTK_INCLUDE_DIRS ${VTK_INCLUDE_DIRS}
-    ${VTK40_VTK_BINARY_DIR}/Utilities/png
-    ${VTK40_VTK_SOURCE_DIR}/Utilities/png
-    ${VTK40_VTK_BINARY_DIR}/Utilities/zlib
-    ${VTK40_VTK_SOURCE_DIR}/Utilities/zlib)
-
-  # Executable locations.
-  if(VTK_WRAP_TCL)
-    set(VTK_TCL_EXE ${VTK40_EXECUTABLE_OUTPUT_PATH}/vtk)
-    set(VTK_WRAP_TCL_EXE ${VTK40_VTK_WRAP_TCL_EXE})
-    set(VTK_TCL_HOME ${VTK40_VTK_SOURCE_DIR}/Wrapping/Tcl)
-  endif()
-  if(VTK_WRAP_PYTHON)
-    set(VTK_WRAP_PYTHON_EXE ${VTK40_VTK_WRAP_PYTHON_EXE})
-  endif()
-  if(VTK_WRAP_JAVA)
-    set(VTK_PARSE_JAVA_EXE ${VTK40_VTK_PARSE_JAVA_EXE})
-    set(VTK_WRAP_JAVA_EXE ${VTK40_VTK_WRAP_JAVA_EXE})
-  endif()
-
-else()
-  # This is a VTK 4.0 install tree.
-
-  set(VTK_INCLUDE_DIRS ${VTK_DIR})
-  set(VTK_LIBRARY_DIRS ${VTK40_CMAKE_INSTALL_PREFIX}/lib/vtk)
-
-  # Executable locations.
-  if(VTK_WRAP_TCL)
-    set(VTK_TCL_EXE ${VTK40_CMAKE_INSTALL_PREFIX}/bin/vtk)
-    set(VTK_WRAP_TCL_EXE ${VTK40_CMAKE_INSTALL_PREFIX}/bin/vtkWrapTcl)
-    set(VTK_TCL_HOME ${VTK40_CMAKE_INSTALL_PREFIX}/lib/vtk/tcl)
-  endif()
-  if(VTK_WRAP_PYTHON)
-    set(VTK_WRAP_PYTHON_EXE ${VTK40_CMAKE_INSTALL_PREFIX}/bin/vtkWrapPython)
-  endif()
-  if(VTK_WRAP_JAVA)
-    set(VTK_PARSE_JAVA_EXE ${VTK40_CMAKE_INSTALL_PREFIX}/bin/vtkParseJava)
-    set(VTK_WRAP_JAVA_EXE ${VTK40_CMAKE_INSTALL_PREFIX}/bin/vtkWrapJava)
-  endif()
-endif()
-
-# Add the system include directories last.
-set(VTK_INCLUDE_DIRS ${VTK_INCLUDE_DIRS} ${VTK_INCLUDE_DIRS_SYS})
-
-# Find the required C and C++ compiler flags.
-if(CMAKE_COMPILER_IS_GNUCXX)
-  if(WIN32)
-    # The platform is gcc on cygwin.
-    set(VTK_REQUIRED_CXX_FLAGS "${VTK_REQUIRED_CXX_FLAGS} -mwin32")
-    set(VTK_REQUIRED_C_FLAGS "${VTK_REQUIRED_C_FLAGS} -mwin32")
-  endif()
-else()
-  if(CMAKE_ANSI_CFLAGS)
-    set(VTK_REQUIRED_C_FLAGS "${VTK_REQUIRED_C_FLAGS} ${CMAKE_ANSI_CFLAGS}")
-  endif()
-  if(CMAKE_SYSTEM MATCHES "OSF1-V")
-     set(VTK_REQUIRED_CXX_FLAGS
-         "${VTK_REQUIRED_CXX_FLAGS} -timplicit_local -no_implicit_include")
-  endif()
-endif()
-
-if(VTK_USE_X)
-  if(CMAKE_X_CFLAGS)
-    set(VTK_REQUIRED_C_FLAGS "${VTK_REQUIRED_C_FLAGS} ${CMAKE_X_CFLAGS}")
-    set(VTK_REQUIRED_CXX_FLAGS "${VTK_REQUIRED_CXX_FLAGS} ${CMAKE_X_CFLAGS}")
-  endif()
-endif()
-
-# Copy library dependencies.
-set(vtkCommonJava_LIB_DEPENDS "${VTK40_vtkCommonJava_LIB_DEPENDS}")
-set(vtkCommonPython_LIB_DEPENDS "${VTK40_vtkCommonPython_LIB_DEPENDS}")
-set(vtkCommonTCL_LIB_DEPENDS "${VTK40_vtkCommonTCL_LIB_DEPENDS}")
-set(vtkCommon_LIB_DEPENDS "${VTK40_vtkCommon_LIB_DEPENDS}")
-set(vtkFilteringJava_LIB_DEPENDS "${VTK40_vtkFilteringJava_LIB_DEPENDS}")
-set(vtkFilteringPython_LIB_DEPENDS "${VTK40_vtkFilteringPython_LIB_DEPENDS}")
-set(vtkFilteringTCL_LIB_DEPENDS "${VTK40_vtkFilteringTCL_LIB_DEPENDS}")
-set(vtkFiltering_LIB_DEPENDS "${VTK40_vtkFiltering_LIB_DEPENDS}")
-set(vtkGraphicsJava_LIB_DEPENDS "${VTK40_vtkGraphicsJava_LIB_DEPENDS}")
-set(vtkGraphicsPython_LIB_DEPENDS "${VTK40_vtkGraphicsPython_LIB_DEPENDS}")
-set(vtkGraphicsTCL_LIB_DEPENDS "${VTK40_vtkGraphicsTCL_LIB_DEPENDS}")
-set(vtkGraphics_LIB_DEPENDS "${VTK40_vtkGraphics_LIB_DEPENDS}")
-set(vtkHybridJava_LIB_DEPENDS "${VTK40_vtkHybridJava_LIB_DEPENDS}")
-set(vtkHybridPython_LIB_DEPENDS "${VTK40_vtkHybridPython_LIB_DEPENDS}")
-set(vtkHybridTCL_LIB_DEPENDS "${VTK40_vtkHybridTCL_LIB_DEPENDS}")
-set(vtkHybrid_LIB_DEPENDS "${VTK40_vtkHybrid_LIB_DEPENDS}")
-set(vtkIOJava_LIB_DEPENDS "${VTK40_vtkIOJava_LIB_DEPENDS}")
-set(vtkIOPython_LIB_DEPENDS "${VTK40_vtkIOPython_LIB_DEPENDS}")
-set(vtkIOTCL_LIB_DEPENDS "${VTK40_vtkIOTCL_LIB_DEPENDS}")
-set(vtkIO_LIB_DEPENDS "${VTK40_vtkIO_LIB_DEPENDS}")
-set(vtkImagingJava_LIB_DEPENDS "${VTK40_vtkImagingJava_LIB_DEPENDS}")
-set(vtkImagingPython_LIB_DEPENDS "${VTK40_vtkImagingPython_LIB_DEPENDS}")
-set(vtkImagingTCL_LIB_DEPENDS "${VTK40_vtkImagingTCL_LIB_DEPENDS}")
-set(vtkImaging_LIB_DEPENDS "${VTK40_vtkImaging_LIB_DEPENDS}")
-set(vtkParallelJava_LIB_DEPENDS "${VTK40_vtkParallelJava_LIB_DEPENDS}")
-set(vtkParallelPython_LIB_DEPENDS "${VTK40_vtkParallelPython_LIB_DEPENDS}")
-set(vtkParallelTCL_LIB_DEPENDS "${VTK40_vtkParallelTCL_LIB_DEPENDS}")
-set(vtkParallel_LIB_DEPENDS "${VTK40_vtkParallel_LIB_DEPENDS}")
-set(vtkPatentedJava_LIB_DEPENDS "${VTK40_vtkPatentedJava_LIB_DEPENDS}")
-set(vtkPatentedPython_LIB_DEPENDS "${VTK40_vtkPatentedPython_LIB_DEPENDS}")
-set(vtkPatentedTCL_LIB_DEPENDS "${VTK40_vtkPatentedTCL_LIB_DEPENDS}")
-set(vtkPatented_LIB_DEPENDS "${VTK40_vtkPatented_LIB_DEPENDS}")
-set(vtkRenderingJava_LIB_DEPENDS "${VTK40_vtkRenderingJava_LIB_DEPENDS}")
-set(vtkRenderingPythonTkWidgets_LIB_DEPENDS "${VTK40_vtkRenderingPythonTkWidgets_LIB_DEPENDS}")
-set(vtkRenderingPython_LIB_DEPENDS "${VTK40_vtkRenderingPython_LIB_DEPENDS}")
-set(vtkRenderingTCL_LIB_DEPENDS "${VTK40_vtkRenderingTCL_LIB_DEPENDS}")
-set(vtkRendering_LIB_DEPENDS "${VTK40_vtkRendering_LIB_DEPENDS}")
-set(vtkjpeg_LIB_DEPENDS "${VTK40_vtkjpeg_LIB_DEPENDS}")
-set(vtkpng_LIB_DEPENDS "${VTK40_vtkpng_LIB_DEPENDS}")
-set(vtkzlib_LIB_DEPENDS "${VTK40_vtkzlib_LIB_DEPENDS}")
-
-# List of VTK configuration variables set above.
-# grep "^[ ]*set(VTK" UseVTKConfig40.cmake |sed 's/[ ]*set(\([^ ]*\) .*/  \1/'
-set(VTK_SETTINGS
-  VTK_BUILD_SHARED
-  VTK_BUILD_VERSION
-  VTK_DEBUG_LEAKS
-  VTK_HAVE_VG500
-  VTK_HAVE_VP1000
-  VTK_INCLUDE_DIRS
-  VTK_KITS
-  VTK_LANGUAGES
-  VTK_LIBRARY_DIRS
-  VTK_MAJOR_VERSION
-  VTK_MANGLE_MESA
-  VTK_MINOR_VERSION
-  VTK_MPIRUN_EXE
-  VTK_MPI_POSTFLAGS
-  VTK_MPI_PREFLAGS
-  VTK_OPENGL_HAS_OSMESA
-  VTK_PARSE_JAVA_EXE
-  VTK_TCL_EXE
-  VTK_TCL_HOME
-  VTK_USE_64BIT_IDS
-  VTK_USE_ANSI_STDLIB
-  VTK_USE_HYBRID
-  VTK_USE_MATROX_IMAGING
-  VTK_USE_MPI
-  VTK_USE_PARALLEL
-  VTK_USE_PATENTED
-  VTK_USE_RENDERING
-  VTK_USE_VIDEO_FOR_WINDOWS
-  VTK_USE_VOLUMEPRO
-  VTK_USE_X
-  VTK_WRAP_JAVA
-  VTK_WRAP_JAVA_EXE
-  VTK_WRAP_PYTHON
-  VTK_WRAP_PYTHON_EXE
-  VTK_WRAP_TCL
-  VTK_WRAP_TCL_EXE
-)
diff --git a/share/cmake-3.2/Modules/WIX.template.in b/share/cmake-3.2/Modules/WIX.template.in
deleted file mode 100644
index bbb7c88..0000000
--- a/share/cmake-3.2/Modules/WIX.template.in
+++ /dev/null
@@ -1,46 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<?include "cpack_variables.wxi"?>
-
-<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"
-    RequiredVersion="3.6.3303.0">
-
-    <Product Id="$(var.CPACK_WIX_PRODUCT_GUID)"
-        Name="$(var.CPACK_PACKAGE_NAME)"
-        Language="1033"
-        Version="$(var.CPACK_PACKAGE_VERSION)"
-        Manufacturer="$(var.CPACK_PACKAGE_VENDOR)"
-        UpgradeCode="$(var.CPACK_WIX_UPGRADE_GUID)">
-
-        <Package InstallerVersion="301" Compressed="yes"/>
-
-        <Media Id="1" Cabinet="media1.cab" EmbedCab="yes"/>
-
-        <MajorUpgrade
-            Schedule="afterInstallInitialize"
-            AllowSameVersionUpgrades="yes"
-            DowngradeErrorMessage="A later version of [ProductName] is already installed. Setup will now exit."/>
-
-        <WixVariable Id="WixUILicenseRtf" Value="$(var.CPACK_WIX_LICENSE_RTF)"/>
-        <Property Id="WIXUI_INSTALLDIR" Value="INSTALL_ROOT"/>
-
-        <?ifdef CPACK_WIX_PRODUCT_ICON?>
-        <Property Id="ARPPRODUCTICON">ProductIcon.ico</Property>
-        <Icon Id="ProductIcon.ico" SourceFile="$(var.CPACK_WIX_PRODUCT_ICON)"/>
-        <?endif?>
-
-        <?ifdef CPACK_WIX_UI_BANNER?>
-        <WixVariable Id="WixUIBannerBmp" Value="$(var.CPACK_WIX_UI_BANNER)"/>
-        <?endif?>
-
-        <?ifdef CPACK_WIX_UI_DIALOG?>
-        <WixVariable Id="WixUIDialogBmp" Value="$(var.CPACK_WIX_UI_DIALOG)"/>
-        <?endif?>
-
-        <FeatureRef Id="ProductFeature"/>
-
-        <UIRef Id="$(var.CPACK_WIX_UI_REF)" />
-
-        <?include "properties.wxi"?>
-    </Product>
-</Wix>
diff --git a/share/cmake-3.2/Modules/WriteCompilerDetectionHeader.cmake b/share/cmake-3.2/Modules/WriteCompilerDetectionHeader.cmake
deleted file mode 100644
index d18f47c..0000000
--- a/share/cmake-3.2/Modules/WriteCompilerDetectionHeader.cmake
+++ /dev/null
@@ -1,664 +0,0 @@
-#.rst:
-# WriteCompilerDetectionHeader
-# ----------------------------
-#
-# This module provides the function write_compiler_detection_header().
-#
-# The ``WRITE_COMPILER_DETECTION_HEADER`` function can be used to generate
-# a file suitable for preprocessor inclusion which contains macros to be
-# used in source code::
-#
-#    write_compiler_detection_header(
-#              FILE <file>
-#              PREFIX <prefix>
-#              [OUTPUT_FILES_VAR <output_files_var> OUTPUT_DIR <output_dir>]
-#              COMPILERS <compiler> [...]
-#              FEATURES <feature> [...]
-#              [VERSION <version>]
-#              [PROLOG <prolog>]
-#              [EPILOG <epilog>]
-#    )
-#
-# The ``write_compiler_detection_header`` function generates the
-# file ``<file>`` with macros which all have the prefix ``<prefix>``.
-#
-# By default, all content is written directly to the ``<file>``.  The
-# ``OUTPUT_FILES_VAR`` may be specified to cause the compiler-specific
-# content to be written to separate files.  The separate files are then
-# available in the ``<output_files_var>`` and may be consumed by the caller
-# for installation for example.  The ``OUTPUT_DIR`` specifies a relative
-# path from the main ``<file>`` to the compiler-specific files. For example:
-#
-# .. code-block:: cmake
-#
-#    write_compiler_detection_header(
-#      FILE climbingstats_compiler_detection.h
-#      PREFIX ClimbingStats
-#      OUTPUT_FILES_VAR support_files
-#      OUTPUT_DIR compilers
-#      COMPILERS GNU Clang MSVC
-#      FEATURES cxx_variadic_templates
-#    )
-#    install(FILES
-#      ${CMAKE_CURRENT_BINARY_DIR}/climbingstats_compiler_detection.h
-#      DESTINATION include
-#    )
-#    install(FILES
-#      ${support_files}
-#      DESTINATION include/compilers
-#    )
-#
-#
-# ``VERSION`` may be used to specify the API version to be generated.
-# Future versions of CMake may introduce alternative APIs.  A given
-# API is selected by any ``<version>`` value greater than or equal
-# to the version of CMake that introduced the given API and less
-# than the version of CMake that introduced its succeeding API.
-# The value of the :variable:`CMAKE_MINIMUM_REQUIRED_VERSION`
-# variable is used if no explicit version is specified.
-# (As of CMake version |release| there is only one API version.)
-#
-# ``PROLOG`` may be specified as text content to write at the start of the
-# header. ``EPILOG`` may be specified as text content to write at the end
-# of the header
-#
-# At least one ``<compiler>`` and one ``<feature>`` must be listed.  Compilers
-# which are known to CMake, but not specified are detected and a preprocessor
-# ``#error`` is generated for them.  A preprocessor macro matching
-# ``<PREFIX>_COMPILER_IS_<compiler>`` is generated for each compiler
-# known to CMake to contain the value ``0`` or ``1``.
-#
-# Possible compiler identifiers are documented with the
-# :variable:`CMAKE_<LANG>_COMPILER_ID` variable.
-# Available features in this version of CMake are listed in the
-# :prop_gbl:`CMAKE_C_KNOWN_FEATURES` and
-# :prop_gbl:`CMAKE_CXX_KNOWN_FEATURES` global properties.
-#
-# See the :manual:`cmake-compile-features(7)` manual for information on
-# compile features.
-#
-# Feature Test Macros
-# ===================
-#
-# For each compiler, a preprocessor macro is generated matching
-# ``<PREFIX>_COMPILER_IS_<compiler>`` which has the content either ``0``
-# or ``1``, depending on the compiler in use. Preprocessor macros for
-# compiler version components are generated matching
-# ``<PREFIX>_COMPILER_VERSION_MAJOR`` ``<PREFIX>_COMPILER_VERSION_MINOR``
-# and ``<PREFIX>_COMPILER_VERSION_PATCH`` containing decimal values
-# for the corresponding compiler version components, if defined.
-#
-# A preprocessor test is generated based on the compiler version
-# denoting whether each feature is enabled.  A preprocessor macro
-# matching ``<PREFIX>_COMPILER_<FEATURE>``, where ``<FEATURE>`` is the
-# upper-case ``<feature>`` name, is generated to contain the value
-# ``0`` or ``1`` depending on whether the compiler in use supports the
-# feature:
-#
-# .. code-block:: cmake
-#
-#    write_compiler_detection_header(
-#      FILE climbingstats_compiler_detection.h
-#      PREFIX ClimbingStats
-#      COMPILERS GNU Clang AppleClang MSVC
-#      FEATURES cxx_variadic_templates
-#    )
-#
-# .. code-block:: c++
-#
-#    #if ClimbingStats_COMPILER_CXX_VARIADIC_TEMPLATES
-#    template<typename... T>
-#    void someInterface(T t...) { /* ... */ }
-#    #else
-#    // Compatibility versions
-#    template<typename T1>
-#    void someInterface(T1 t1) { /* ... */ }
-#    template<typename T1, typename T2>
-#    void someInterface(T1 t1, T2 t2) { /* ... */ }
-#    template<typename T1, typename T2, typename T3>
-#    void someInterface(T1 t1, T2 t2, T3 t3) { /* ... */ }
-#    #endif
-#
-# Symbol Macros
-# =============
-#
-# Some additional symbol-defines are created for particular features for
-# use as symbols which may be conditionally defined empty:
-#
-# .. code-block:: c++
-#
-#    class MyClass ClimbingStats_FINAL
-#    {
-#        ClimbingStats_CONSTEXPR int someInterface() { return 42; }
-#    };
-#
-# The ``ClimbingStats_FINAL`` macro will expand to ``final`` if the
-# compiler (and its flags) support the ``cxx_final`` feature, and the
-# ``ClimbingStats_CONSTEXPR`` macro will expand to ``constexpr``
-# if ``cxx_constexpr`` is supported.
-#
-# The following features generate corresponding symbol defines:
-#
-# ========================== =================================== =================
-#         Feature                          Define                      Symbol
-# ========================== =================================== =================
-# ``c_restrict``              ``<PREFIX>_RESTRICT``               ``restrict``
-# ``cxx_constexpr``           ``<PREFIX>_CONSTEXPR``              ``constexpr``
-# ``cxx_deleted_functions``   ``<PREFIX>_DELETED_FUNCTION``       ``= delete``
-# ``cxx_extern_templates``    ``<PREFIX>_EXTERN_TEMPLATE``        ``extern``
-# ``cxx_final``               ``<PREFIX>_FINAL``                  ``final``
-# ``cxx_noexcept``            ``<PREFIX>_NOEXCEPT``               ``noexcept``
-# ``cxx_noexcept``            ``<PREFIX>_NOEXCEPT_EXPR(X)``       ``noexcept(X)``
-# ``cxx_override``            ``<PREFIX>_OVERRIDE``               ``override``
-# ========================== =================================== =================
-#
-# Compatibility Implementation Macros
-# ===================================
-#
-# Some features are suitable for wrapping in a macro with a backward
-# compatibility implementation if the compiler does not support the feature.
-#
-# When the ``cxx_static_assert`` feature is not provided by the compiler,
-# a compatibility implementation is available via the
-# ``<PREFIX>_STATIC_ASSERT(COND)`` and
-# ``<PREFIX>_STATIC_ASSERT_MSG(COND, MSG)`` function-like macros. The macros
-# expand to ``static_assert`` where that compiler feature is available, and
-# to a compatibility implementation otherwise. In the first form, the
-# condition is stringified in the message field of ``static_assert``.  In
-# the second form, the message ``MSG`` is passed to the message field of
-# ``static_assert``, or ignored if using the backward compatibility
-# implementation.
-#
-# The ``cxx_attribute_deprecated`` feature provides a macro definition
-# ``<PREFIX>_DEPRECATED``, which expands to either the standard
-# ``[[deprecated]]`` attribute or a compiler-specific decorator such
-# as ``__attribute__((__deprecated__))`` used by GNU compilers.
-#
-# The ``cxx_alignas`` feature provides a macro definition
-# ``<PREFIX>_ALIGNAS`` which expands to either the standard ``alignas``
-# decorator or a compiler-specific decorator such as
-# ``__attribute__ ((__aligned__))`` used by GNU compilers.
-#
-# The ``cxx_alignof`` feature provides a macro definition
-# ``<PREFIX>_ALIGNOF`` which expands to either the standard ``alignof``
-# decorator or a compiler-specific decorator such as ``__alignof__``
-# used by GNU compilers.
-#
-# ============================= ================================ =====================
-#           Feature                          Define                     Symbol
-# ============================= ================================ =====================
-# ``cxx_alignas``                ``<PREFIX>_ALIGNAS``             ``alignas``
-# ``cxx_alignof``                ``<PREFIX>_ALIGNOF``             ``alignof``
-# ``cxx_nullptr``                ``<PREFIX>_NULLPTR``             ``nullptr``
-# ``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT``       ``static_assert``
-# ``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT_MSG``   ``static_assert``
-# ``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED``          ``[[deprecated]]``
-# ``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED_MSG``      ``[[deprecated]]``
-# ``cxx_thread_local``           ``<PREFIX>_THREAD_LOCAL``        ``thread_local``
-# ============================= ================================ =====================
-#
-# A use-case which arises with such deprecation macros is the deprecation
-# of an entire library.  In that case, all public API in the library may
-# be decorated with the ``<PREFIX>_DEPRECATED`` macro.  This results in
-# very noisy build output when building the library itself, so the macro
-# may be may be defined to empty in that case when building the deprecated
-# library:
-#
-# .. code-block:: cmake
-#
-#   add_library(compat_support ${srcs})
-#   target_compile_definitions(compat_support
-#     PRIVATE
-#       CompatSupport_DEPRECATED=
-#   )
-
-#=============================================================================
-# Copyright 2014 Stephen Kelly <steveire@gmail.com>
-#
-# Distributed under the OSI-approved BSD License (the "License");
-# see accompanying file Copyright.txt for details.
-#
-# This software is distributed WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the License for more information.
-#=============================================================================
-# (To distribute this file outside of CMake, substitute the full
-#  License text for the above reference.)
-
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
-include(${CMAKE_CURRENT_LIST_DIR}/CMakeCompilerIdDetection.cmake)
-
-function(_load_compiler_variables CompilerId lang)
-  include("${CMAKE_ROOT}/Modules/Compiler/${CompilerId}-${lang}-FeatureTests.cmake" OPTIONAL)
-  set(_cmake_oldestSupported_${CompilerId} ${_cmake_oldestSupported} PARENT_SCOPE)
-  foreach(feature ${ARGN})
-    set(_cmake_feature_test_${CompilerId}_${feature} ${_cmake_feature_test_${feature}} PARENT_SCOPE)
-  endforeach()
-  include("${CMAKE_ROOT}/Modules/Compiler/${CompilerId}-${lang}-DetermineCompiler.cmake" OPTIONAL
-      RESULT_VARIABLE determinedCompiler)
-  if (NOT determinedCompiler)
-    include("${CMAKE_ROOT}/Modules/Compiler/${CompilerId}-DetermineCompiler.cmake" OPTIONAL)
-  endif()
-  set(_compiler_id_version_compute_${CompilerId} ${_compiler_id_version_compute} PARENT_SCOPE)
-endfunction()
-
-function(write_compiler_detection_header
-    file_keyword file_arg
-    prefix_keyword prefix_arg
-    )
-  if (NOT file_keyword STREQUAL FILE)
-    message(FATAL_ERROR "write_compiler_detection_header: FILE parameter missing.")
-  endif()
-  if (NOT prefix_keyword STREQUAL PREFIX)
-    message(FATAL_ERROR "write_compiler_detection_header: PREFIX parameter missing.")
-  endif()
-  set(options)
-  set(oneValueArgs VERSION EPILOG PROLOG OUTPUT_FILES_VAR OUTPUT_DIR)
-  set(multiValueArgs COMPILERS FEATURES)
-  cmake_parse_arguments(_WCD "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
-
-  if (NOT _WCD_COMPILERS)
-    message(FATAL_ERROR "Invalid arguments.  write_compiler_detection_header requires at least one compiler.")
-  endif()
-  if (NOT _WCD_FEATURES)
-    message(FATAL_ERROR "Invalid arguments.  write_compiler_detection_header requires at least one feature.")
-  endif()
-
-  if(_WCD_UNPARSED_ARGUMENTS)
-    message(FATAL_ERROR "Unparsed arguments: ${_WCD_UNPARSED_ARGUMENTS}")
-  endif()
-
-  if (prefix_arg STREQUAL "")
-    message(FATAL_ERROR "A prefix must be specified")
-  endif()
-  string(MAKE_C_IDENTIFIER ${prefix_arg} cleaned_prefix)
-  if (NOT prefix_arg STREQUAL cleaned_prefix)
-    message(FATAL_ERROR "The prefix must be a valid C identifier.")
-  endif()
-
-  if(NOT _WCD_VERSION)
-    set(_WCD_VERSION ${CMAKE_MINIMUM_REQUIRED_VERSION})
-  endif()
-  set(_min_version 3.1.0) # Version which introduced this function
-  if (_WCD_VERSION VERSION_LESS _min_version)
-    set(err "VERSION compatibility for write_compiler_detection_header is set to ${_WCD_VERSION}, which is too low.")
-    set(err "${err}  It must be set to at least ${_min_version}.  ")
-    set(err "${err}  Either set the VERSION parameter to the write_compiler_detection_header function, or update")
-    set(err "${err} your minimum required CMake version with the cmake_minimum_required command.")
-    message(FATAL_ERROR "${err}")
-  endif()
-
-  if(_WCD_OUTPUT_FILES_VAR)
-    if(NOT _WCD_OUTPUT_DIR)
-      message(FATAL_ERROR "If OUTPUT_FILES_VAR is specified, then OUTPUT_DIR must also be specified.")
-    endif()
-  endif()
-  if(_WCD_OUTPUT_DIR)
-    if(NOT _WCD_OUTPUT_FILES_VAR)
-      message(FATAL_ERROR "If OUTPUT_DIR is specified, then OUTPUT_FILES_VAR must also be specified.")
-    endif()
-    get_filename_component(main_file_dir ${file_arg} DIRECTORY)
-    if (NOT IS_ABSOLUTE ${main_file_dir})
-      set(main_file_dir "${CMAKE_CURRENT_BINARY_DIR}/${main_file_dir}")
-    endif()
-    if (NOT IS_ABSOLUTE ${_WCD_OUTPUT_DIR})
-      set(_WCD_OUTPUT_DIR "${CMAKE_CURRENT_BINARY_DIR}/${_WCD_OUTPUT_DIR}")
-    endif()
-    get_filename_component(out_file_dir ${_WCD_OUTPUT_DIR} ABSOLUTE)
-    string(FIND ${out_file_dir} ${main_file_dir} idx)
-    if (NOT idx EQUAL 0)
-      message(FATAL_ERROR "The compiler-specific output directory must be within the same directory as the main file.")
-    endif()
-
-    if (main_file_dir STREQUAL out_file_dir)
-      unset(_WCD_OUTPUT_DIR)
-    else()
-      string(REPLACE "${main_file_dir}/" "" _WCD_OUTPUT_DIR "${out_file_dir}/")
-    endif()
-  endif()
-
-  set(compilers
-    GNU
-    Clang
-    AppleClang
-    MSVC
-    SunPro
-  )
-
-  set(_hex_compilers ADSP Borland Embarcadero SunPro)
-
-  foreach(_comp ${_WCD_COMPILERS})
-    list(FIND compilers ${_comp} idx)
-    if (idx EQUAL -1)
-      message(FATAL_ERROR "Unsupported compiler ${_comp}.")
-    endif()
-    if (NOT _need_hex_conversion)
-      list(FIND _hex_compilers ${_comp} idx)
-      if (NOT idx EQUAL -1)
-        set(_need_hex_conversion TRUE)
-      endif()
-    endif()
-  endforeach()
-
-  set(file_content "
-// This is a generated file. Do not edit!
-
-#ifndef ${prefix_arg}_COMPILER_DETECTION_H
-#define ${prefix_arg}_COMPILER_DETECTION_H
-")
-
-  if (_WCD_PROLOG)
-    set(file_content "${file_content}\n${_WCD_PROLOG}\n")
-  endif()
-
-  if (_need_hex_conversion)
-    set(file_content "${file_content}
-#define ${prefix_arg}_DEC(X) (X)
-#define ${prefix_arg}_HEX(X) ( \\
-    ((X)>>28 & 0xF) * 10000000 + \\
-    ((X)>>24 & 0xF) *  1000000 + \\
-    ((X)>>20 & 0xF) *   100000 + \\
-    ((X)>>16 & 0xF) *    10000 + \\
-    ((X)>>12 & 0xF) *     1000 + \\
-    ((X)>>8  & 0xF) *      100 + \\
-    ((X)>>4  & 0xF) *       10 + \\
-    ((X)     & 0xF) \\
-    )\n")
-  endif()
-
-  foreach(feature ${_WCD_FEATURES})
-    if (feature MATCHES "^cxx_")
-      list(APPEND _langs CXX)
-      list(APPEND CXX_features ${feature})
-    elseif (feature MATCHES "^c_")
-      list(APPEND _langs C)
-      list(APPEND C_features ${feature})
-    else()
-      message(FATAL_ERROR "Unsupported feature ${feature}.")
-    endif()
-  endforeach()
-  list(REMOVE_DUPLICATES _langs)
-
-  if(_WCD_OUTPUT_FILES_VAR)
-    get_filename_component(main_file_name ${file_arg} NAME)
-    set(compiler_file_content_
-"#ifndef ${prefix_arg}_COMPILER_DETECTION_H
-#  error This file may only be included from ${main_file_name}
-#endif\n")
-  endif()
-
-  foreach(_lang ${_langs})
-    set(target_compilers)
-    foreach(compiler ${_WCD_COMPILERS})
-      _load_compiler_variables(${compiler} ${_lang} ${${_lang}_features})
-      if(_cmake_oldestSupported_${compiler})
-        list(APPEND target_compilers ${compiler})
-      endif()
-    endforeach()
-
-    get_property(known_features GLOBAL PROPERTY CMAKE_${_lang}_KNOWN_FEATURES)
-    foreach(feature ${${_lang}_features})
-      list(FIND known_features ${feature} idx)
-      if (idx EQUAL -1)
-        message(FATAL_ERROR "Unsupported feature ${feature}.")
-      endif()
-    endforeach()
-
-    if(_lang STREQUAL CXX)
-      set(file_content "${file_content}\n#ifdef __cplusplus\n")
-    else()
-      set(file_content "${file_content}\n#ifndef __cplusplus\n")
-    endif()
-
-    compiler_id_detection(ID_CONTENT ${_lang} PREFIX ${prefix_arg}_
-      ID_DEFINE
-    )
-
-    set(file_content "${file_content}${ID_CONTENT}\n")
-
-    set(pp_if "if")
-    foreach(compiler ${target_compilers})
-      set(file_content "${file_content}\n#  ${pp_if} ${prefix_arg}_COMPILER_IS_${compiler}\n")
-
-      if(_WCD_OUTPUT_FILES_VAR)
-        set(compile_file_name "${_WCD_OUTPUT_DIR}${prefix_arg}_COMPILER_INFO_${compiler}_${_lang}.h")
-        set(file_content "${file_content}\n#    include \"${compile_file_name}\"\n")
-      endif()
-
-      if(_WCD_OUTPUT_FILES_VAR)
-        set(compiler_file_content compiler_file_content_${compiler}_${_lang})
-      else()
-        set(compiler_file_content file_content)
-      endif()
-
-      set(${compiler_file_content} "${${compiler_file_content}}
-#    if !(${_cmake_oldestSupported_${compiler}})
-#      error Unsupported compiler version
-#    endif\n")
-
-      set(PREFIX ${prefix_arg}_)
-      if (_need_hex_conversion)
-        set(MACRO_DEC ${prefix_arg}_DEC)
-        set(MACRO_HEX ${prefix_arg}_HEX)
-      else()
-        set(MACRO_DEC)
-        set(MACRO_HEX)
-      endif()
-      string(CONFIGURE "${_compiler_id_version_compute_${compiler}}" VERSION_BLOCK @ONLY)
-      set(${compiler_file_content} "${${compiler_file_content}}${VERSION_BLOCK}\n")
-      set(PREFIX)
-      set(MACRO_DEC)
-      set(MACRO_HEX)
-
-      set(pp_if "elif")
-      foreach(feature ${${_lang}_features})
-        string(TOUPPER ${feature} feature_upper)
-        set(feature_PP "COMPILER_${feature_upper}")
-        set(_define_item "\n#    define ${prefix_arg}_${feature_PP} 0\n")
-        if (_cmake_feature_test_${compiler}_${feature} STREQUAL "1")
-          set(_define_item "\n#    define ${prefix_arg}_${feature_PP} 1\n")
-        elseif (_cmake_feature_test_${compiler}_${feature})
-          set(_define_item "\n#      define ${prefix_arg}_${feature_PP} 0\n")
-          set(_define_item "\n#    if ${_cmake_feature_test_${compiler}_${feature}}\n#      define ${prefix_arg}_${feature_PP} 1\n#    else${_define_item}#    endif\n")
-        endif()
-        set(${compiler_file_content} "${${compiler_file_content}}${_define_item}")
-      endforeach()
-    endforeach()
-    if(pp_if STREQUAL "elif")
-      set(file_content "${file_content}
-#  else
-#    error Unsupported compiler
-#  endif\n")
-    endif()
-    foreach(feature ${${_lang}_features})
-      string(TOUPPER ${feature} feature_upper)
-      set(feature_PP "COMPILER_${feature_upper}")
-      set(def_name ${prefix_arg}_${feature_PP})
-      if (feature STREQUAL c_restrict)
-        set(def_value "${prefix_arg}_RESTRICT")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} restrict
-#  else
-#    define ${def_value}
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_constexpr)
-        set(def_value "${prefix_arg}_CONSTEXPR")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} constexpr
-#  else
-#    define ${def_value}
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_final)
-        set(def_value "${prefix_arg}_FINAL")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} final
-#  else
-#    define ${def_value}
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_override)
-        set(def_value "${prefix_arg}_OVERRIDE")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} override
-#  else
-#    define ${def_value}
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_static_assert)
-        set(def_value "${prefix_arg}_STATIC_ASSERT(X)")
-        set(def_value_msg "${prefix_arg}_STATIC_ASSERT_MSG(X, MSG)")
-        set(static_assert_struct "template<bool> struct ${prefix_arg}StaticAssert;\ntemplate<> struct ${prefix_arg}StaticAssert<true>{};\n")
-        set(def_standard "#    define ${def_value} static_assert(X, #X)\n#    define ${def_value_msg} static_assert(X, MSG)")
-        set(def_alternative "${static_assert_struct}#    define ${def_value} sizeof(${prefix_arg}StaticAssert<X>)\n#    define ${def_value_msg} sizeof(${prefix_arg}StaticAssert<X>)")
-        set(file_content "${file_content}#  if ${def_name}\n${def_standard}\n#  else\n${def_alternative}\n#  endif\n\n")
-      endif()
-      if (feature STREQUAL cxx_alignas)
-        set(def_value "${prefix_arg}_ALIGNAS(X)")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} alignas(X)
-#  elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang || ${prefix_arg}_COMPILER_IS_AppleClang
-#    define ${def_value} __attribute__ ((__aligned__(X)))
-#  elif ${prefix_arg}_COMPILER_IS_MSVC
-#    define ${def_value} __declspec(align(X))
-#  else
-#    define ${def_value}
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_alignof)
-        set(def_value "${prefix_arg}_ALIGNOF(X)")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} alignof(X)
-#  elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang || ${prefix_arg}_COMPILER_IS_AppleClang
-#    define ${def_value} __alignof__(X)
-#  elif ${prefix_arg}_COMPILER_IS_MSVC
-#    define ${def_value} __alignof(X)
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_deleted_functions)
-        set(def_value "${prefix_arg}_DELETED_FUNCTION")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} = delete
-#  else
-#    define ${def_value}
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_extern_templates)
-        set(def_value "${prefix_arg}_EXTERN_TEMPLATE")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} extern
-#  else
-#    define ${def_value}
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_noexcept)
-        set(def_value "${prefix_arg}_NOEXCEPT")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} noexcept
-#    define ${def_value}_EXPR(X) noexcept(X)
-#  else
-#    define ${def_value}
-#    define ${def_value}_EXPR(X)
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_nullptr)
-        set(def_value "${prefix_arg}_NULLPTR")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} nullptr
-#  else
-#    define ${def_value} static_cast<void*>(0)
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_thread_local)
-        set(def_value "${prefix_arg}_THREAD_LOCAL")
-        set(file_content "${file_content}
-#  if ${def_name}
-#    define ${def_value} thread_local
-#  elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang || ${prefix_arg}_COMPILER_IS_AppleClang
-#    define ${def_value} __thread
-#  elif ${prefix_arg}_COMPILER_IS_MSVC
-#    define ${def_value} __declspec(thread)
-#  else
-// ${def_value} not defined for this configuration.
-#  endif
-\n")
-      endif()
-      if (feature STREQUAL cxx_attribute_deprecated)
-        set(def_name ${prefix_arg}_${feature_PP})
-        set(def_value "${prefix_arg}_DEPRECATED")
-        set(file_content "${file_content}
-#  ifndef ${def_value}
-#    if ${def_name}
-#      define ${def_value} [[deprecated]]
-#      define ${def_value}_MSG(MSG) [[deprecated(MSG)]]
-#    elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang
-#      define ${def_value} __attribute__((__deprecated__))
-#      define ${def_value}_MSG(MSG) __attribute__((__deprecated__(MSG)))
-#    elif ${prefix_arg}_COMPILER_IS_MSVC
-#      define ${def_value} __declspec(deprecated)
-#      define ${def_value}_MSG(MSG) __declspec(deprecated(MSG))
-#    else
-#      define ${def_value}
-#      define ${def_value}_MSG(MSG)
-#    endif
-#  endif
-\n")
-      endif()
-    endforeach()
-
-    set(file_content "${file_content}#endif\n")
-
-  endforeach()
-
-  if(_WCD_OUTPUT_FILES_VAR)
-    foreach(compiler ${_WCD_COMPILERS})
-      foreach(_lang ${_langs})
-        if(compiler_file_content_${compiler}_${_lang})
-          set(CMAKE_CONFIGURABLE_FILE_CONTENT "${compiler_file_content_}")
-          set(CMAKE_CONFIGURABLE_FILE_CONTENT "${CMAKE_CONFIGURABLE_FILE_CONTENT}${compiler_file_content_${compiler}_${_lang}}")
-
-          set(compile_file_name "${_WCD_OUTPUT_DIR}${prefix_arg}_COMPILER_INFO_${compiler}_${_lang}.h")
-          set(full_path "${main_file_dir}/${compile_file_name}")
-          list(APPEND ${_WCD_OUTPUT_FILES_VAR} ${full_path})
-          configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
-            "${full_path}"
-            @ONLY
-          )
-        endif()
-      endforeach()
-    endforeach()
-    set(${_WCD_OUTPUT_FILES_VAR} ${${_WCD_OUTPUT_FILES_VAR}} PARENT_SCOPE)
-  endif()
-
-  if (_WCD_EPILOG)
-    set(file_content "${file_content}\n${_WCD_EPILOG}\n")
-  endif()
-  set(file_content "${file_content}\n#endif")
-
-  set(CMAKE_CONFIGURABLE_FILE_CONTENT ${file_content})
-  configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
-    "${file_arg}"
-    @ONLY
-  )
-endfunction()
diff --git a/share/cmake-3.2/Modules/exportheader.cmake.in b/share/cmake-3.2/Modules/exportheader.cmake.in
deleted file mode 100644
index 118de16..0000000
--- a/share/cmake-3.2/Modules/exportheader.cmake.in
+++ /dev/null
@@ -1,41 +0,0 @@
-
-#ifndef @INCLUDE_GUARD_NAME@
-#define @INCLUDE_GUARD_NAME@
-
-#ifdef @STATIC_DEFINE@
-#  define @EXPORT_MACRO_NAME@
-#  define @NO_EXPORT_MACRO_NAME@
-#else
-#  ifndef @EXPORT_MACRO_NAME@
-#    ifdef @EXPORT_IMPORT_CONDITION@
-        /* We are building this library */
-#      define @EXPORT_MACRO_NAME@ @DEFINE_EXPORT@
-#    else
-        /* We are using this library */
-#      define @EXPORT_MACRO_NAME@ @DEFINE_IMPORT@
-#    endif
-#  endif
-
-#  ifndef @NO_EXPORT_MACRO_NAME@
-#    define @NO_EXPORT_MACRO_NAME@ @DEFINE_NO_EXPORT@
-#  endif
-#endif
-
-#ifndef @DEPRECATED_MACRO_NAME@
-#  define @DEPRECATED_MACRO_NAME@ @DEFINE_DEPRECATED@
-#endif
-
-#ifndef @DEPRECATED_MACRO_NAME@_EXPORT
-#  define @DEPRECATED_MACRO_NAME@_EXPORT @EXPORT_MACRO_NAME@ @DEPRECATED_MACRO_NAME@
-#endif
-
-#ifndef @DEPRECATED_MACRO_NAME@_NO_EXPORT
-#  define @DEPRECATED_MACRO_NAME@_NO_EXPORT @NO_EXPORT_MACRO_NAME@ @DEPRECATED_MACRO_NAME@
-#endif
-
-#cmakedefine01 DEFINE_NO_DEPRECATED
-#if DEFINE_NO_DEPRECATED
-# define @NO_DEPRECATED_MACRO_NAME@
-#endif
-
-#endif
diff --git a/share/cmake-3.2/Modules/readme.txt b/share/cmake-3.2/Modules/readme.txt
deleted file mode 100644
index b40f3d0..0000000
--- a/share/cmake-3.2/Modules/readme.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-See the "Find Modules" section of the cmake-developer(7) manual page.
-
-For more information about how to contribute modules to CMake, see this page:
-http://www.cmake.org/Wiki/CMake:Module_Maintainers
diff --git a/share/cmake-3.2/Templates/AppleInfo.plist b/share/cmake-3.2/Templates/AppleInfo.plist
deleted file mode 100644
index 1f68ccf..0000000
--- a/share/cmake-3.2/Templates/AppleInfo.plist
+++ /dev/null
@@ -1,36 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-<dict>
-	<key>CFBundleDevelopmentRegion</key>
-	<string>English</string>
-	<key>CFBundleExecutable</key>
-	<string>${APPLE_GUI_EXECUTABLE}</string>
-	<key>CFBundleGetInfoString</key>
-	<string>${APPLE_GUI_INFO_STRING}</string>
-	<key>CFBundleIconFile</key>
-	<string>${APPLE_GUI_ICON}</string>
-	<key>CFBundleIdentifier</key>
-	<string>${APPLE_GUI_IDENTIFIER}</string>
-	<key>CFBundleInfoDictionaryVersion</key>
-	<string>6.0</string>
-	<key>CFBundleLongVersionString</key>
-	<string>${APPLE_GUI_LONG_VERSION_STRING}</string>
-	<key>CFBundleName</key>
-	<string>${APPLE_GUI_BUNDLE_NAME}</string>
-	<key>CFBundlePackageType</key>
-	<string>APPL</string>
-	<key>CFBundleShortVersionString</key>
-	<string>${APPLE_GUI_SHORT_VERSION_STRING}</string>
-	<key>CFBundleSignature</key>
-	<string>????</string>
-	<key>CFBundleVersion</key>
-	<string>${APPLE_GUI_BUNDLE_VERSION}</string>
-	<key>CSResourcesFileMapped</key>
-	<true/>
-	<key>LSRequiresCarbon</key>
-	<true/>
-	<key>NSHumanReadableCopyright</key>
-	<string>${APPLE_GUI_COPYRIGHT}</string>
-</dict>
-</plist>
diff --git a/share/cmake-3.2/Templates/CMakeVisualStudio6Configurations.cmake b/share/cmake-3.2/Templates/CMakeVisualStudio6Configurations.cmake
deleted file mode 100644
index 6355969..0000000
--- a/share/cmake-3.2/Templates/CMakeVisualStudio6Configurations.cmake
+++ /dev/null
@@ -1,3 +0,0 @@
-# When the dll templates are changed, this list should be
-# updated with the list of possible configurations.
-set(CMAKE_CONFIGURATION_TYPES Debug Release MinSizeRel RelWithDebInfo)
diff --git a/share/cmake-3.2/Templates/CPack.GenericDescription.txt b/share/cmake-3.2/Templates/CPack.GenericDescription.txt
deleted file mode 100644
index 9ca1802..0000000
--- a/share/cmake-3.2/Templates/CPack.GenericDescription.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-DESCRIPTION
-===========
-
-This is an installer created using CPack (http://www.cmake.org). No additional installation instructions provided.
-
diff --git a/share/cmake-3.2/Templates/CPack.GenericLicense.txt b/share/cmake-3.2/Templates/CPack.GenericLicense.txt
deleted file mode 100644
index c211bb3..0000000
--- a/share/cmake-3.2/Templates/CPack.GenericLicense.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-LICENSE
-=======
-
-This is an installer created using CPack (http://www.cmake.org). No license provided.
-
diff --git a/share/cmake-3.2/Templates/DLLFooter.dsptemplate b/share/cmake-3.2/Templates/DLLFooter.dsptemplate
deleted file mode 100644
index 0d0682a..0000000
--- a/share/cmake-3.2/Templates/DLLFooter.dsptemplate
+++ /dev/null
@@ -1,4 +0,0 @@
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project
diff --git a/share/cmake-3.2/Templates/DLLHeader.dsptemplate b/share/cmake-3.2/Templates/DLLHeader.dsptemplate
deleted file mode 100644
index d9bccaf..0000000
--- a/share/cmake-3.2/Templates/DLLHeader.dsptemplate
+++ /dev/null
@@ -1,192 +0,0 @@
-# Microsoft Developer Studio Project File - Name="OUTPUT_LIBNAME" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
-
-CFG=OUTPUT_LIBNAME - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak" CFG="OUTPUT_LIBNAME - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "OUTPUT_LIBNAME - Win32 MinSizeRel" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "OUTPUT_LIBNAME - Win32 RelWithDebInfo" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
-
-# ITK DSP Header file
-# This file is read by the build system of itk, and is used as the top part of
-# a microsoft project dsp header file
-# IF this is in a dsp file, then it is not the header, but has
-# already been used, so do not edit here...
-
-# variables to REPLACE
-# 
-# BUILD_INCLUDES == include path
-# EXTRA_DEFINES == compiler defines
-# OUTPUT_DIRECTORY == override in output directory
-# OUTPUT_LIBNAME  == name of output library
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-        
-!IF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Release"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELEASE"
-# PROP Intermediate_Dir "Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "_WINDOWS" /D "_USRDLL" OUTPUT_LIBNAME_EXPORTS /FD /c
-# ADD CPP /nologo /D "WIN32" /D "_WINDOWS" /D "_USRDLL"  /FD /c
-# ADD CPP BUILD_INCLUDES_RELEASE EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELEASE
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELEASE /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELEASE
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /dll /machine:I386
-# ADD LINK32 /nologo /dll TARGET_VERSION_FLAG /machine:I386 /out:"OUTPUT_DIRECTORY_RELEASE/OUTPUT_NAME_RELEASE" TARGET_IMPLIB_FLAG_RELEASE
-CM_MULTILINE_OPTIONS_RELEASE
-
-CMAKE_CUSTOM_RULE_CODE_RELEASE
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Debug"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "OUTPUT_DIRECTORY_DEBUG"
-# PROP Intermediate_Dir "Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" OUTPUT_LIBNAME_EXPORTS /FD /c
-# ADD CPP /nologo /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_USRDLL"  /FD /c
-# ADD CPP BUILD_INCLUDES_DEBUG EXTRA_DEFINES  OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_DEBUG
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC BUILD_INCLUDES_DEBUG /l 0x409 /d "_DEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_DEBUG
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /dll /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /dll TARGET_VERSION_FLAG /debug /machine:I386 /out:"OUTPUT_DIRECTORY_DEBUG/OUTPUT_NAME_DEBUG" /pdbtype:sept TARGET_IMPLIB_FLAG_DEBUG
-CM_MULTILINE_OPTIONS_DEBUG
-
-CMAKE_CUSTOM_RULE_CODE_DEBUG
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 MinSizeRel"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "MinSizeRel"
-# PROP BASE Intermediate_Dir "MinSizeRel"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_MINSIZEREL"
-# PROP Intermediate_Dir "MinSizeRel"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32"  /D "_WINDOWS" /D "_USRDLL" /FD /c  OUTPUT_LIBNAME_EXPORTS
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /D "WIN32" /D "_WINDOWS" /D "_USRDLL"  /FD /c
-# ADD CPP BUILD_INCLUDES_MINSIZEREL EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_MINSIZEREL
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_MINSIZEREL /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_MINSIZEREL
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32  /nologo /dll /machine:I386 
-# ADD LINK32 /nologo /dll TARGET_VERSION_FLAG /machine:I386 /out:"OUTPUT_DIRECTORY_MINSIZEREL/OUTPUT_NAME_MINSIZEREL" TARGET_IMPLIB_FLAG_MINSIZEREL
-CM_MULTILINE_OPTIONS_MINSIZEREL
-
-CMAKE_CUSTOM_RULE_CODE_MINSIZEREL
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "RelWithDebInfo"
-# PROP BASE Intermediate_Dir "RelWithDebInfo"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG         
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELWITHDEBINFO"
-# PROP Intermediate_Dir "RelWithDebInfo"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "_WINDOWS" /D "_USRDLL" OUTPUT_LIBNAME_EXPORTS /FD /c
-# ADD CPP /nologo /D "WIN32" /D "_WINDOWS" /D "_USRDLL"  /FD /c
-# ADD CPP BUILD_INCLUDES_RELWITHDEBINFO EXTRA_DEFINES  OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELWITHDEBINFO
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELWITHDEBINFO /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELWITHDEBINFO
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /dll /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /dll TARGET_VERSION_FLAG /debug /machine:I386 /pdbtype:sept /out:"OUTPUT_DIRECTORY_RELWITHDEBINFO/OUTPUT_NAME_RELWITHDEBINFO" TARGET_IMPLIB_FLAG_RELWITHDEBINFO
-CM_MULTILINE_OPTIONS_RELWITHDEBINFO
-
-CMAKE_CUSTOM_RULE_CODE_RELWITHDEBINFO
-
-!ENDIF 
-
-# Begin Target
-
-# Name "OUTPUT_LIBNAME - Win32 Release"
-# Name "OUTPUT_LIBNAME - Win32 Debug"
-# Name "OUTPUT_LIBNAME - Win32 MinSizeRel"
-# Name "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
diff --git a/share/cmake-3.2/Templates/EXEFooter.dsptemplate b/share/cmake-3.2/Templates/EXEFooter.dsptemplate
deleted file mode 100644
index 0d0682a..0000000
--- a/share/cmake-3.2/Templates/EXEFooter.dsptemplate
+++ /dev/null
@@ -1,4 +0,0 @@
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project
diff --git a/share/cmake-3.2/Templates/EXEHeader.dsptemplate b/share/cmake-3.2/Templates/EXEHeader.dsptemplate
deleted file mode 100644
index 3a6d2fe..0000000
--- a/share/cmake-3.2/Templates/EXEHeader.dsptemplate
+++ /dev/null
@@ -1,183 +0,0 @@
-# Microsoft Developer Studio Project File - Name="pcbuilder" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# CM DSP Header file
-# This file is read by the build system of cm, and is used as the top part of
-# a microsoft project dsp header file
-# IF this is in a dsp file, then it is not the header, but has
-# already been used, so do not edit here...
-
-# variables to REPLACE
-# 
-# BUILD_INCLUDES == include path
-# OUTPUT_DIRECTORY == override in output directory
-# EXTRA_DEFINES == compiler defines
-# OUTPUT_LIBNAME  == name of output library
-# CM_LIBRARIES == libraries linked in 
-# TARGTYPE "Win32 (x86) Application" 0x0103
-
-CFG=OUTPUT_LIBNAME - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak" CFG="OUTPUT_LIBNAME - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "OUTPUT_LIBNAME - Win32 MinSizeRel" (based on "Win32 (x86) Application")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Release" (based on "Win32 (x86) Application")
-!MESSAGE "OUTPUT_LIBNAME - Win32 RelWithDebInfo" (based on "Win32 (x86) Application")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Release"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELEASE"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo  /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /FD /c
-# ADD CPP /nologo  /D "WIN32"  /D "NDEBUG" /D "_CONSOLE" /FD /c
-# ADD CPP BUILD_INCLUDES_RELEASE EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELEASE
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELEASE /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELEASE
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32  /nologo /subsystem:console /machine:I386 /IGNORE:4089
-# ADD LINK32  /nologo /subsystem:console /machine:I386 /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_RELEASE\OUTPUT_NAME_RELEASE" TARGET_IMPLIB_FLAG_RELEASE
-CM_MULTILINE_OPTIONS_RELEASE
-
-CMAKE_CUSTOM_RULE_CODE_RELEASE
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Debug"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "OUTPUT_DIRECTORY_DEBUG"
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD BASE CPP   /D "WIN32" /D "_DEBUG" /D "_CONSOLE"  /FD /GZ /c
-# ADD CPP /nologo  /D "WIN32"  /D "_DEBUG" /D "_CONSOLE" /FD /GZ /c
-# ADD CPP BUILD_INCLUDES_DEBUG EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_DEBUG
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC BUILD_INCLUDES_DEBUG /l 0x409 /d "_DEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_DEBUG
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32  /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept /IGNORE:4089
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_DEBUG\OUTPUT_NAME_DEBUG" TARGET_IMPLIB_FLAG_DEBUG
-CM_MULTILINE_OPTIONS_DEBUG
-
-CMAKE_CUSTOM_RULE_CODE_DEBUG
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 MinSizeRel"
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "MinSizeRel"
-# PROP BASE Intermediate_Dir "MinSizeRel"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_MINSIZEREL"
-# PROP Intermediate_Dir "MinSizeRel"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo  /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /FD /c
-# ADD CPP /nologo  /D "WIN32" BUILD_INCLUDES_MINSIZEREL EXTRA_DEFINES /D "NDEBUG" /D "_CONSOLE"  /FD /c
-# ADD CPP BUILD_INCLUDES_MINSIZEREL EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_MINSIZEREL
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_MINSIZEREL /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_MINSIZEREL
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /subsystem:console /machine:I386 /IGNORE:4089
-# ADD LINK32 /nologo /subsystem:console /machine:I386 /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_MINSIZEREL\OUTPUT_NAME_MINSIZEREL" TARGET_IMPLIB_FLAG_MINSIZEREL
-CM_MULTILINE_OPTIONS_MINSIZEREL
-
-CMAKE_CUSTOM_RULE_CODE_MINSIZEREL
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "RelWithDebInfo"
-# PROP BASE Intermediate_Dir "RelWithDebInfo"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELWITHDEBINFO"
-# PROP Intermediate_Dir "RelWithDebInfo"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo  /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /FD /c
-# ADD CPP /nologo  /D "WIN32"  /D "NDEBUG" /D "_CONSOLE" /FD /c
-# ADD CPP BUILD_INCLUDES_RELWITHDEBINFO EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELWITHDEBINFO
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELWITHDEBINFO /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELWITHDEBINFO
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /subsystem:console /debug /machine:I386 /IGNORE:4089
-# ADD LINK32  /nologo /subsystem:console /debug /machine:I386 /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_RELWITHDEBINFO\OUTPUT_NAME_RELWITHDEBINFO" TARGET_IMPLIB_FLAG_RELWITHDEBINFO
-CM_MULTILINE_OPTIONS_RELWITHDEBINFO
-
-CMAKE_CUSTOM_RULE_CODE_RELWITHDEBINFO
-
-!ENDIF 
-
-# Begin Target
-
-# Name "OUTPUT_LIBNAME - Win32 Release"
-# Name "OUTPUT_LIBNAME - Win32 Debug"
-# Name "OUTPUT_LIBNAME - Win32 MinSizeRel"
-# Name "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
diff --git a/share/cmake-3.2/Templates/EXEWinHeader.dsptemplate b/share/cmake-3.2/Templates/EXEWinHeader.dsptemplate
deleted file mode 100644
index 350e3ea..0000000
--- a/share/cmake-3.2/Templates/EXEWinHeader.dsptemplate
+++ /dev/null
@@ -1,187 +0,0 @@
-# Microsoft Developer Studio Project File - Name="pcbuilder" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# CM DSP Header file
-# This file is read by the build system of cm, and is used as the top part of
-# a microsoft project dsp header file
-# IF this is in a dsp file, then it is not the header, but has
-# already been used, so do not edit here...
-
-# variables to REPLACE
-# 
-# BUILD_INCLUDES == include path
-# OUTPUT_DIRECTORY == override in output directory
-# EXTRA_DEFINES == compiler defines
-# OUTPUT_LIBNAME  == name of output library
-# CM_LIBRARIES == libraries linked in 
-# TARGTYPE "Win32 (x86) Application" 0x0101
-
-CFG=OUTPUT_LIBNAME - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak" CFG="OUTPUT_LIBNAME - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "OUTPUT_LIBNAME - Win32 MinSizeRel" (based on "Win32 (x86) Application")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Release" (based on "Win32 (x86) Application")
-!MESSAGE "OUTPUT_LIBNAME - Win32 RelWithDebInfo" (based on "Win32 (x86) Application")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Release"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELEASE"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c
-# ADD CPP /nologo /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c
-# ADD CPP BUILD_INCLUDES_RELEASE EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELEASE
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELEASE /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELEASE
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /subsystem:windows /machine:I386  /IGNORE:4089
-# ADD LINK32  /nologo /subsystem:windows /machine:I386  /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_RELEASE\OUTPUT_NAME_RELEASE" TARGET_IMPLIB_FLAG_RELEASE
-CM_MULTILINE_OPTIONS_RELEASE
-
-CMAKE_CUSTOM_RULE_CODE_RELEASE
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Debug"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "OUTPUT_DIRECTORY_DEBUG"
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD BASE CPP  /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /FD /c
-# ADD CPP /nologo  /D "WIN32"  /D "_DEBUG" /D "_WINDOWS" /FD /GZ /c
-# ADD CPP BUILD_INCLUDES_DEBUG EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_DEBUG
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC BUILD_INCLUDES_DEBUG /l 0x409 /d "_DEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_DEBUG
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept /IGNORE:4089
-# ADD LINK32 /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_DEBUG\OUTPUT_NAME_DEBUG" TARGET_IMPLIB_FLAG_DEBUG
-CM_MULTILINE_OPTIONS_DEBUG
-
-CMAKE_CUSTOM_RULE_CODE_DEBUG
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 MinSizeRel"
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "MinSizeRel"
-# PROP BASE Intermediate_Dir "MinSizeRel"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_MINSIZEREL"
-# PROP Intermediate_Dir "MinSizeRel"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c
-# ADD CPP /nologo  /D "WIN32"  /D "NDEBUG" /D "_WINDOWS" /FD /c
-# ADD CPP BUILD_INCLUDES_MINSIZEREL EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_MINSIZEREL
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_MINSIZEREL /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_MINSIZEREL
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /subsystem:windows /machine:I386 /pdbtype:sept /IGNORE:4089
-# ADD LINK32 /nologo /subsystem:windows  /machine:I386 /pdbtype:sept /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_MINSIZEREL\OUTPUT_NAME_MINSIZEREL" TARGET_IMPLIB_FLAG_MINSIZEREL
-CM_MULTILINE_OPTIONS_MINSIZEREL
-
-CMAKE_CUSTOM_RULE_CODE_MINSIZEREL
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "RelWithDebInfo"
-# PROP BASE Intermediate_Dir "RelWithDebInfo"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELWITHDEBINFO"
-# PROP Intermediate_Dir "RelWithDebInfo"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c
-# ADD CPP /nologo /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c
-# ADD CPP BUILD_INCLUDES_RELWITHDEBINFO EXTRA_DEFINES OUTPUT_LIBNAME_EXPORTS
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELWITHDEBINFO
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELWITHDEBINFO /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELWITHDEBINFO
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 /nologo /subsystem:windows /machine:I386  /IGNORE:4089
-# ADD LINK32 /nologo /subsystem:windows /debug /machine:I386  /IGNORE:4089 TARGET_VERSION_FLAG
-# ADD LINK32 /out:"OUTPUT_DIRECTORY_RELWITHDEBINFO\OUTPUT_NAME_RELWITHDEBINFO" TARGET_IMPLIB_FLAG_RELWITHDEBINFO
-CM_MULTILINE_OPTIONS_RELWITHDEBINFO
-
-CMAKE_CUSTOM_RULE_CODE_RELWITHDEBINFO
-
-!ENDIF 
-
-# Begin Target
-
-# Name "OUTPUT_LIBNAME - Win32 Release"
-# Name "OUTPUT_LIBNAME - Win32 Debug"
-# Name "OUTPUT_LIBNAME - Win32 MinSizeRel"
-# Name "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
diff --git a/share/cmake-3.2/Templates/UtilityFooter.dsptemplate b/share/cmake-3.2/Templates/UtilityFooter.dsptemplate
deleted file mode 100644
index 941fb44..0000000
--- a/share/cmake-3.2/Templates/UtilityFooter.dsptemplate
+++ /dev/null
@@ -1,2 +0,0 @@
-# End Target
-# End Project
diff --git a/share/cmake-3.2/Templates/UtilityHeader.dsptemplate b/share/cmake-3.2/Templates/UtilityHeader.dsptemplate
deleted file mode 100644
index 509f597..0000000
--- a/share/cmake-3.2/Templates/UtilityHeader.dsptemplate
+++ /dev/null
@@ -1,95 +0,0 @@
-# Microsoft Developer Studio Project File - Name="OUTPUT_LIBNAME" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Generic Project" 0x010a
-
-CFG=OUTPUT_LIBNAME - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak" CFG="OUTPUT_LIBNAME - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "OUTPUT_LIBNAME - Win32 MinSizeRel" (based on "Win32 (x86) Generic Project")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Release" (based on "Win32 (x86) Generic Project")
-!MESSAGE "OUTPUT_LIBNAME - Win32 RelWithDebInfo" (based on "Win32 (x86) Generic Project")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Debug" (based on "Win32 (x86) Generic Project")
-!MESSAGE 
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-MTL=midl.exe
-
-!IF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-
-CMAKE_CUSTOM_RULE_CODE_RELEASE
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-
-CMAKE_CUSTOM_RULE_CODE_DEBUG
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 MinSizeRel"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "MinSizeRel"
-# PROP BASE Intermediate_Dir "MinSizeRel"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Intermediate_Dir "MinSizeRel"
-# PROP Target_Dir ""
-
-CMAKE_CUSTOM_RULE_CODE_MINSIZEREL
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "RelWithDebInfo"
-# PROP BASE Intermediate_Dir "RelWithDebInfo"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Intermediate_Dir "RelWithDebInfo"
-# PROP Target_Dir ""
-
-CMAKE_CUSTOM_RULE_CODE_RELWITHDEBINFO
-
-!ENDIF 
-
-# Begin Target
-
-# Name "OUTPUT_LIBNAME - Win32 Release"
-# Name "OUTPUT_LIBNAME - Win32 Debug"
-# Name "OUTPUT_LIBNAME - Win32 MinSizeRel"
-# Name "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
diff --git a/share/cmake-3.2/Templates/staticLibFooter.dsptemplate b/share/cmake-3.2/Templates/staticLibFooter.dsptemplate
deleted file mode 100644
index 0d0682a..0000000
--- a/share/cmake-3.2/Templates/staticLibFooter.dsptemplate
+++ /dev/null
@@ -1,4 +0,0 @@
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project
diff --git a/share/cmake-3.2/Templates/staticLibHeader.dsptemplate b/share/cmake-3.2/Templates/staticLibHeader.dsptemplate
deleted file mode 100644
index a8892e1..0000000
--- a/share/cmake-3.2/Templates/staticLibHeader.dsptemplate
+++ /dev/null
@@ -1,173 +0,0 @@
-# Microsoft Developer Studio Project File - Name="OUTPUT_LIBNAME" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# CMAKE DSP Header file
-# This file is read by the CMAKE, and is used as the top part of
-# a microsoft project dsp header file
-# IF this is in a dsp file, then it is not the header, but has
-# already been used, so do not edit in that case.
-
-# variables to REPLACE
-# 
-# BUILD_INCLUDES == include path
-# EXTRA_DEFINES == compiler defines
-# OUTPUT_DIRECTORY == override in output directory
-# OUTPUT_LIBNAME  == name of output library
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-CFG=OUTPUT_LIBNAME - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "OUTPUT_LIBNAME.mak" CFG="OUTPUT_LIBNAME - Win32 Debug"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "OUTPUT_LIBNAME - Win32 MinSizeRel" (based on "Win32 (x86) Static Library")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "OUTPUT_LIBNAME - Win32 RelWithDebInfo" (based on "Win32 (x86) Static Library")
-!MESSAGE "OUTPUT_LIBNAME - Win32 Debug" (based on "Win32 (x86) Static Library")
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Release"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELEASE"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "NDEBUG" /D "_LIB"  /FD /c
-# ADD CPP /nologo /D "NDEBUG" /D "WIN32" /D "_LIB"  /FD /c
-# ADD CPP BUILD_INCLUDES_RELEASE EXTRA_DEFINES
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELEASE
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELEASE /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELEASE
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"OUTPUT_DIRECTORY_RELEASE/OUTPUT_NAME_RELEASE" CM_STATIC_LIB_ARGS_RELEASE
-
-CMAKE_CUSTOM_RULE_CODE_RELEASE
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 Debug"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "OUTPUT_DIRECTORY_DEBUG"
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "_DEBUG" /D "_LIB"  /FD /c
-# ADD CPP /nologo /D "_DEBUG" /D "WIN32" /D "_LIB"  /FD /GZ /c
-# ADD CPP BUILD_INCLUDES_DEBUG EXTRA_DEFINES
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_DEBUG
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC BUILD_INCLUDES_DEBUG /l 0x409 /d "_DEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_DEBUG
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"OUTPUT_DIRECTORY_DEBUG/OUTPUT_NAME_DEBUG" CM_STATIC_LIB_ARGS_DEBUG
-
-CMAKE_CUSTOM_RULE_CODE_DEBUG
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 MinSizeRel"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "MinSizeRel"
-# PROP BASE Intermediate_Dir "MinSizeRel"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_MINSIZEREL"
-# PROP Intermediate_Dir "MinSizeRel"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_USRDLL" /D "_ATL_DLL" /FD /c
-# ADD CPP /nologo /D "NDEBUG" /D "_ATL_DLL"  /D "WIN32" /D "_WINDOWS" /D "_USRDLL" /FD /c
-# ADD CPP BUILD_INCLUDES_MINSIZEREL EXTRA_DEFINES
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_MINSIZEREL
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_MINSIZEREL /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_MINSIZEREL
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"OUTPUT_DIRECTORY_MINSIZEREL/OUTPUT_NAME_MINSIZEREL" CM_STATIC_LIB_ARGS_MINSIZEREL
-
-CMAKE_CUSTOM_RULE_CODE_MINSIZEREL
-
-!ELSEIF  "$(CFG)" == "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
-
-# PROP BASE Use_MFC CMAKE_MFC_FLAG
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "RelWithDebInfo"
-# PROP BASE Intermediate_Dir "RelWithDebInfo"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC CMAKE_MFC_FLAG
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "OUTPUT_DIRECTORY_RELWITHDEBINFO"
-# PROP Intermediate_Dir "RelWithDebInfo"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /D "WIN32" /D "NDEBUG" /D "_LIB"  /FD /c
-# ADD CPP /nologo /D "NDEBUG" /D "WIN32" /D "_LIB"  /FD /c
-# ADD CPP BUILD_INCLUDES_RELWITHDEBINFO EXTRA_DEFINES
-# ADD CPP CMAKE_CXX_FLAGS
-# ADD CPP CMAKE_CXX_FLAGS_RELWITHDEBINFO
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC BUILD_INCLUDES_RELWITHDEBINFO /l 0x409 /d "NDEBUG"
-# ADD RSC COMPILE_DEFINITIONS
-# ADD RSC COMPILE_DEFINITIONS_RELWITHDEBINFO
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"OUTPUT_DIRECTORY_RELWITHDEBINFO/OUTPUT_NAME_RELWITHDEBINFO" CM_STATIC_LIB_ARGS_RELWITHDEBINFO
-
-CMAKE_CUSTOM_RULE_CODE_RELWITHDEBINFO
-
-!ENDIF 
-
-# Begin Target
-
-# Name "OUTPUT_LIBNAME - Win32 Release"
-# Name "OUTPUT_LIBNAME - Win32 Debug"
-# Name "OUTPUT_LIBNAME - Win32 MinSizeRel"
-# Name "OUTPUT_LIBNAME - Win32 RelWithDebInfo"
-
diff --git a/share/cmake-3.2/completions/cmake b/share/cmake-3.2/completions/cmake
deleted file mode 100644
index 59e0298..0000000
--- a/share/cmake-3.2/completions/cmake
+++ /dev/null
@@ -1,151 +0,0 @@
-# bash completion for cmake(1)                             -*- shell-script -*-
-
-_cmake()
-{
-    local cur prev words cword split=false
-    _init_completion -n := || return
-
-    # Workaround for options like -DCMAKE_BUILD_TYPE=Release
-    local prefix=
-    if [[ $cur == -D* ]]; then
-        prev=-D
-        prefix=-D
-        cur="${cur#-D}"
-    elif [[ $cur == -U* ]]; then
-        prev=-U
-        prefix=-U
-        cur="${cur#-U}"
-    fi
-
-    case "$prev" in
-        -D)
-            if [[ $cur == *=* ]]; then
-            # complete values for variables
-                local var type value
-                var="${cur%%[:=]*}"
-                value="${cur#*=}"
-
-                if [[ $cur == CMAKE_BUILD_TYPE* ]]; then # most widely used case
-                    COMPREPLY=( $( compgen -W 'Debug Release RelWithDebInfo
-                        MinSizeRel' -- "$value" ) )
-                    return
-                fi
-
-                if [[ $cur == *:* ]]; then
-                    type="${cur#*:}"
-                    type="${type%%=*}"
-                else # get type from cache if it's not set explicitly
-                    type=$( cmake -LA -N 2>/dev/null | grep "$var:" \
-                        2>/dev/null )
-                    type="${type#*:}"
-                    type="${type%%=*}"
-                fi
-                case "$type" in
-                    FILEPATH)
-                        cur="$value"
-                        _filedir
-                        return
-                        ;;
-                    PATH)
-                        cur="$value"
-                        _filedir -d
-                        return
-                        ;;
-                    BOOL)
-                        COMPREPLY=( $( compgen -W 'ON OFF TRUE FALSE' -- \
-                            "$value" ) )
-                        return
-                        ;;
-                    STRING|INTERNAL)
-                        # no completion available
-                        return
-                        ;;
-                esac
-            elif [[ $cur == *:* ]]; then
-            # complete types
-                local type="${cur#*:}"
-                COMPREPLY=( $( compgen -W 'FILEPATH PATH STRING BOOL INTERNAL'\
-                    -S = -- "$type" ) )
-                compopt -o nospace
-            else
-            # complete variable names
-                COMPREPLY=( $( compgen -W '$( cmake -LA -N | tail -n +2 |
-                    cut -f1 -d: )' -P "$prefix" -- "$cur" ) )
-                compopt -o nospace
-            fi
-            return
-            ;;
-        -U)
-            COMPREPLY=( $( compgen -W '$( cmake -LA -N | tail -n +2 |
-                cut -f1 -d: )' -P "$prefix" -- "$cur" ) )
-            return
-            ;;
-    esac
-
-    _split_longopt && split=true
-
-    case "$prev" in
-        -C|-P|--graphviz|--system-information)
-            _filedir
-            return
-            ;;
-        --build)
-            _filedir -d
-            return
-            ;;
-        -E)
-            COMPREPLY=( $( compgen -W "$( cmake -E help |& sed -n \
-                '/^  /{s|^  \([^ ]\{1,\}\) .*$|\1|;p}' 2>/dev/null )" \
-                -- "$cur" ) )
-            return
-            ;;
-        -G)
-            local IFS=$'\n'
-            local quoted
-            printf -v quoted %q "$cur"
-            COMPREPLY=( $( compgen -W '$( cmake --help 2>/dev/null | sed -n \
-                -e "1,/^Generators/d" \
-                -e "/^  *[^ =]/{s|^ *\([^=]*[^ =]\).*$|\1|;s| |\\\\ |g;p}" \
-                2>/dev/null )' -- "$quoted" ) )
-            return
-            ;;
-        --help-command)
-            COMPREPLY=( $( compgen -W '$( cmake --help-command-list 2>/dev/null|
-                grep -v "^cmake version " )' -- "$cur" ) )
-            return
-            ;;
-        --help-module)
-            COMPREPLY=( $( compgen -W '$( cmake --help-module-list 2>/dev/null|
-                grep -v "^cmake version " )' -- "$cur" ) )
-            return
-            ;;
-         --help-policy)
-            COMPREPLY=( $( compgen -W '$( cmake --help-policies 2>/dev/null |
-                grep "^  CMP" 2>/dev/null )' -- "$cur" ) )
-            return
-            ;;
-         --help-property)
-            COMPREPLY=( $( compgen -W '$( cmake --help-property-list \
-                2>/dev/null | grep -v "^cmake version " )' -- "$cur" ) )
-            return
-            ;;
-         --help-variable)
-            COMPREPLY=( $( compgen -W '$( cmake --help-variable-list \
-                2>/dev/null | grep -v "^cmake version " )' -- "$cur" ) )
-            return
-            ;;
-    esac
-
-    $split && return
-
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $(compgen -W '$( _parse_help "$1" --help )' -- ${cur}) )
-        [[ $COMPREPLY == *= ]] && compopt -o nospace
-        [[ $COMPREPLY ]] && return
-    fi
-
-    _filedir
-} &&
-complete -F _cmake cmake
-
-# ex: ts=4 sw=4 et filetype=sh
diff --git a/share/cmake-3.2/completions/cpack b/share/cmake-3.2/completions/cpack
deleted file mode 100644
index 9ab6048..0000000
--- a/share/cmake-3.2/completions/cpack
+++ /dev/null
@@ -1,61 +0,0 @@
-# bash completion for cpack(1)                             -*- shell-script -*-
-
-_cpack()
-{
-    local cur prev words cword
-    _init_completion -n = || return
-
-    case "$prev" in
-        -G)
-            COMPREPLY=( $( compgen -W '$( cpack --help 2>/dev/null |
-                sed -e "1,/^Generators/d" -e "s|^ *\([^ ]*\) .*$|\1|" \
-                2>/dev/null )' -- "$cur" ) )
-            return
-            ;;
-        -C)
-            COMPREPLY=( $( compgen -W 'Debug Release RelWithDebInfo
-                MinSizeRel' -- "$cur" ) )
-            return
-            ;;
-        -D)
-            [[ $cur == *=* ]] && return # no completion for values
-            COMPREPLY=( $( compgen -W '$( cpack --help-variable-list \
-                2>/dev/null | grep -v "^cpack version " )' -S = -- "$cur" ) )
-            compopt -o nospace
-            return
-            ;;
-        -P|-R|--vendor)
-            # argument required but no completions available
-            return
-            ;;
-        -B)
-            _filedir -d
-            return
-            ;;
-        --config)
-            _filedir
-            return
-            ;;
-        --help-command)
-            COMPREPLY=( $( compgen -W '$( cpack --help-command-list 2>/dev/null|
-                grep -v "^cpack version " )' -- "$cur" ) )
-            return
-            ;;
-        --help-variable)
-            COMPREPLY=( $( compgen -W '$( cpack --help-variable-list \
-                2>/dev/null | grep -v "^cpack version " )' -- "$cur" ) )
-            return
-            ;;
-    esac
-
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $(compgen -W '$( _parse_help "$1" --help )' -- ${cur}) )
-        [[ $COMPREPLY == *= ]] && compopt -o nospace
-        [[ $COMPREPLY ]] && return
-    fi
-
-    _filedir
-} &&
-complete -F _cpack cpack
-
-# ex: ts=4 sw=4 et filetype=sh
diff --git a/share/cmake-3.2/completions/ctest b/share/cmake-3.2/completions/ctest
deleted file mode 100644
index 327e12c..0000000
--- a/share/cmake-3.2/completions/ctest
+++ /dev/null
@@ -1,85 +0,0 @@
-# bash completion for ctest(1)                             -*- shell-script -*-
-
-_ctest()
-{
-    local cur prev words cword
-    _init_completion -n = || return
-
-    case "$prev" in
-        -C|--build-config)
-            COMPREPLY=( $( compgen -W 'Debug Release RelWithDebInfo
-                MinSizeRel' -- "$cur" ) )
-            return
-            ;;
-        -j|--parallel)
-            COMPREPLY=( $( compgen -W "{1..$(( $(_ncpus)*2 ))}" -- "$cur" ) )
-            return
-            ;;
-        -O|--output-log|-A|--add-notes|--extra-submit)
-            _filedir
-            return
-            ;;
-        -L|--label-regex|-LE|--label-exclude)
-            COMPREPLY=( $( compgen -W '$( ctest --print-labels 2>/dev/null |
-                grep "^  " 2>/dev/null | cut -d" " -f 3 )' -- "$cur" ) )
-            return
-            ;;
-        --track|-I|--tests-information|--max-width|--timeout|--stop-time)
-            # argument required but no completions available
-            return
-            ;;
-        -R|--tests-regex|-E|--exclude-regex)
-            COMPREPLY=( $( compgen -W '$( ctest -N 2>/dev/null |
-                grep "^  Test" 2>/dev/null | cut -d: -f 2 )' -- "$cur" ) )
-            return
-            ;;
-        -D|--dashboard)
-            if [[ $cur == @(Experimental|Nightly|Continuous)* ]]; then
-                local model action
-                action=${cur#@(Experimental|Nightly|Continuous)}
-                model=${cur%"$action"}
-                COMPREPLY=( $( compgen -W 'Start Update Configure Build Test
-                    Coverage Submit MemCheck' -P "$model" -- "$action" ) )
-            else
-                COMPREPLY=( $( compgen -W 'Experimental Nightly Continuous' \
-                -- "$cur" ) )
-                compopt -o nospace
-            fi
-            return
-            ;;
-        -M|--test-model)
-            COMPREPLY=( $( compgen -W 'Experimental Nightly Continuous' -- \
-                "$cur" ) )
-            return
-            ;;
-        -T|--test-action)
-            COMPREPLY=( $( compgen -W 'Start Update Configure Build Test
-                Coverage Submit MemCheck' -- "$cur" ) )
-            return
-            ;;
-        -S|--script|-SP|--script-new-process)
-            _filedir '@(cmake|ctest)'
-            return
-            ;;
-        --interactive-debug-mode)
-            COMPREPLY=( $( compgen -W '0 1' -- "$cur" ) )
-            return
-            ;;
-        --help-command)
-            COMPREPLY=( $( compgen -W '$( ctest --help-command-list 2>/dev/null|
-                grep -v "^ctest version " )' -- "$cur" ) )
-            return
-            ;;
-    esac
-
-    if [[ "$cur" == -* ]]; then
-        COMPREPLY=( $(compgen -W '$( _parse_help "$1" --help )' -- ${cur}) )
-        [[ $COMPREPLY == *= ]] && compopt -o nospace
-        [[ $COMPREPLY ]] && return
-    fi
-
-    _filedir
-} &&
-complete -F _ctest ctest
-
-# ex: ts=4 sw=4 et filetype=sh
diff --git a/share/cmake-3.2/editors/emacs/cmake-mode.el b/share/cmake-3.2/editors/emacs/cmake-mode.el
deleted file mode 100644
index 7458a66..0000000
--- a/share/cmake-3.2/editors/emacs/cmake-mode.el
+++ /dev/null
@@ -1,409 +0,0 @@
-;;; cmake-mode.el --- major-mode for editing CMake sources
-
-;=============================================================================
-; CMake - Cross Platform Makefile Generator
-; Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
-;
-; Distributed under the OSI-approved BSD License (the "License");
-; see accompanying file Copyright.txt for details.
-;
-; This software is distributed WITHOUT ANY WARRANTY; without even the
-; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-; See the License for more information.
-;=============================================================================
-
-;------------------------------------------------------------------------------
-
-;;; Commentary:
-
-;; Provides syntax highlighting and indentation for CMakeLists.txt and
-;; *.cmake source files.
-;;
-;; Add this code to your .emacs file to use the mode:
-;;
-;;  (setq load-path (cons (expand-file-name "/dir/with/cmake-mode") load-path))
-;;  (require 'cmake-mode)
-
-;------------------------------------------------------------------------------
-
-;;; Code:
-;;
-;; cmake executable variable used to run cmake --help-command
-;; on commands in cmake-mode
-;;
-;; cmake-command-help Written by James Bigler
-;;
-
-(defcustom cmake-mode-cmake-executable "cmake"
-  "*The name of the cmake executable.
-
-This can be either absolute or looked up in $PATH.  You can also
-set the path with these commands:
- (setenv \"PATH\" (concat (getenv \"PATH\") \";C:\\\\Program Files\\\\CMake 2.8\\\\bin\"))
- (setenv \"PATH\" (concat (getenv \"PATH\") \":/usr/local/cmake/bin\"))"
-  :type 'file
-  :group 'cmake)
-;;
-;; Regular expressions used by line indentation function.
-;;
-(defconst cmake-regex-blank "^[ \t]*$")
-(defconst cmake-regex-comment "#.*")
-(defconst cmake-regex-paren-left "(")
-(defconst cmake-regex-paren-right ")")
-(defconst cmake-regex-argument-quoted
-  "\"\\([^\"\\\\]\\|\\\\\\(.\\|\n\\)\\)*\"")
-(defconst cmake-regex-argument-unquoted
-  "\\([^ \t\r\n()#\"\\\\]\\|\\\\.\\)\\([^ \t\r\n()#\\\\]\\|\\\\.\\)*")
-(defconst cmake-regex-token (concat "\\(" cmake-regex-comment
-                                    "\\|" cmake-regex-paren-left
-                                    "\\|" cmake-regex-paren-right
-                                    "\\|" cmake-regex-argument-unquoted
-                                    "\\|" cmake-regex-argument-quoted
-                                    "\\)"))
-(defconst cmake-regex-indented (concat "^\\("
-                                       cmake-regex-token
-                                       "\\|" "[ \t\r\n]"
-                                       "\\)*"))
-(defconst cmake-regex-block-open
-  "^\\(if\\|macro\\|foreach\\|else\\|elseif\\|while\\|function\\)$")
-(defconst cmake-regex-block-close
-  "^[ \t]*\\(endif\\|endforeach\\|endmacro\\|else\\|elseif\\|endwhile\\|endfunction\\)[ \t]*(")
-
-;------------------------------------------------------------------------------
-
-;;
-;; Helper functions for line indentation function.
-;;
-(defun cmake-line-starts-inside-string ()
-  "Determine whether the beginning of the current line is in a string."
-  (if (save-excursion
-        (beginning-of-line)
-        (let ((parse-end (point)))
-          (goto-char (point-min))
-          (nth 3 (parse-partial-sexp (point) parse-end))
-          )
-        )
-      t
-    nil
-    )
-  )
-
-(defun cmake-find-last-indented-line ()
-  "Move to the beginning of the last line that has meaningful indentation."
-  (let ((point-start (point))
-        region)
-    (forward-line -1)
-    (setq region (buffer-substring-no-properties (point) point-start))
-    (while (and (not (bobp))
-                (or (looking-at cmake-regex-blank)
-                    (cmake-line-starts-inside-string)
-                    (not (and (string-match cmake-regex-indented region)
-                              (= (length region) (match-end 0))))))
-      (forward-line -1)
-      (setq region (buffer-substring-no-properties (point) point-start))
-      )
-    )
-  )
-
-;------------------------------------------------------------------------------
-
-;;
-;; Line indentation function.
-;;
-(defun cmake-indent ()
-  "Indent current line as CMAKE code."
-  (interactive)
-  (if (cmake-line-starts-inside-string)
-      ()
-    (if (bobp)
-        (cmake-indent-line-to 0)
-      (let (cur-indent)
-
-        (save-excursion
-          (beginning-of-line)
-
-          (let ((point-start (point))
-                (case-fold-search t)  ;; case-insensitive
-                token)
-
-            ; Search back for the last indented line.
-            (cmake-find-last-indented-line)
-
-            ; Start with the indentation on this line.
-            (setq cur-indent (current-indentation))
-
-            ; Search forward counting tokens that adjust indentation.
-            (while (re-search-forward cmake-regex-token point-start t)
-              (setq token (match-string 0))
-              (if (string-match (concat "^" cmake-regex-paren-left "$") token)
-                  (setq cur-indent (+ cur-indent cmake-tab-width))
-                )
-              (if (string-match (concat "^" cmake-regex-paren-right "$") token)
-                  (setq cur-indent (- cur-indent cmake-tab-width))
-                )
-              (if (and
-                   (string-match cmake-regex-block-open token)
-                   (looking-at (concat "[ \t]*" cmake-regex-paren-left))
-                   )
-                  (setq cur-indent (+ cur-indent cmake-tab-width))
-                )
-              )
-            (goto-char point-start)
-
-            ; If this is the end of a block, decrease indentation.
-            (if (looking-at cmake-regex-block-close)
-                (setq cur-indent (- cur-indent cmake-tab-width))
-              )
-            )
-          )
-
-        ; Indent this line by the amount selected.
-        (if (< cur-indent 0)
-            (cmake-indent-line-to 0)
-          (cmake-indent-line-to cur-indent)
-          )
-        )
-      )
-    )
-  )
-
-(defun cmake-point-in-indendation ()
-  (string-match "^[ \\t]*$" (buffer-substring (point-at-bol) (point))))
-
-(defun cmake-indent-line-to (column)
-  "Indent the current line to COLUMN.
-If point is within the existing indentation it is moved to the end of
-the indentation.  Otherwise it retains the same position on the line"
-  (if (cmake-point-in-indendation)
-      (indent-line-to column)
-    (save-excursion (indent-line-to column))))
-
-;------------------------------------------------------------------------------
-
-;;
-;; Helper functions for buffer
-;;
-(defun unscreamify-cmake-buffer ()
-  "Convert all CMake commands to lowercase in buffer."
-  (interactive)
-  (goto-char (point-min))
-  (while (re-search-forward "^\\([ \t]*\\)\\(\\w+\\)\\([ \t]*(\\)" nil t)
-    (replace-match
-     (concat
-      (match-string 1)
-      (downcase (match-string 2))
-      (match-string 3))
-     t))
-  )
-
-;------------------------------------------------------------------------------
-
-;;
-;; Keyword highlighting regex-to-face map.
-;;
-(defconst cmake-font-lock-keywords
-  (list '("^[ \t]*\\([[:word:]_]+\\)[ \t]*(" 1 font-lock-function-name-face))
-  "Highlighting expressions for CMAKE mode."
-  )
-
-;------------------------------------------------------------------------------
-
-;;
-;; Syntax table for this mode.  Initialize to nil so that it is
-;; regenerated when the cmake-mode function is called.
-;;
-(defvar cmake-mode-syntax-table nil "Syntax table for cmake-mode.")
-(setq cmake-mode-syntax-table nil)
-
-;;
-;; User hook entry point.
-;;
-(defvar cmake-mode-hook nil)
-
-;;
-;; Indentation increment.
-;;
-(defvar cmake-tab-width 2)
-
-;------------------------------------------------------------------------------
-
-;;
-;; CMake mode startup function.
-;;
-;;;###autoload
-(defun cmake-mode ()
-  "Major mode for editing CMake listfiles."
-  (interactive)
-  (kill-all-local-variables)
-  (setq major-mode 'cmake-mode)
-  (setq mode-name "CMAKE")
-
-  ; Create the syntax table
-  (setq cmake-mode-syntax-table (make-syntax-table))
-  (set-syntax-table cmake-mode-syntax-table)
-  (modify-syntax-entry ?\(  "()" cmake-mode-syntax-table)
-  (modify-syntax-entry ?\)  ")(" cmake-mode-syntax-table)
-  (modify-syntax-entry ?# "<" cmake-mode-syntax-table)
-  (modify-syntax-entry ?\n ">" cmake-mode-syntax-table)
-
-  ; Setup font-lock mode.
-  (make-local-variable 'font-lock-defaults)
-  (setq font-lock-defaults '(cmake-font-lock-keywords))
-
-  ; Setup indentation function.
-  (make-local-variable 'indent-line-function)
-  (setq indent-line-function 'cmake-indent)
-
-  ; Setup comment syntax.
-  (make-local-variable 'comment-start)
-  (setq comment-start "#")
-
-  ; Run user hooks.
-  (run-hooks 'cmake-mode-hook))
-
-; Help mode starts here
-
-
-;;;###autoload
-(defun cmake-command-run (type &optional topic buffer)
-  "Runs the command cmake with the arguments specified.  The
-optional argument topic will be appended to the argument list."
-  (interactive "s")
-  (let* ((bufname (if buffer buffer (concat "*CMake" type (if topic "-") topic "*")))
-         (buffer  (if (get-buffer bufname) (get-buffer bufname) (generate-new-buffer bufname)))
-         (command (concat cmake-mode-cmake-executable " " type " " topic))
-         ;; Turn of resizing of mini-windows for shell-command.
-         (resize-mini-windows nil)
-         )
-    (shell-command command buffer)
-    (save-selected-window
-      (select-window (display-buffer buffer 'not-this-window))
-      (cmake-mode)
-      (toggle-read-only t))
-    )
-  )
-
-;;;###autoload
-(defun cmake-help-list-commands ()
-  "Prints out a list of the cmake commands."
-  (interactive)
-  (cmake-command-run "--help-command-list")
-  )
-
-(defvar cmake-commands '() "List of available topics for --help-command.")
-(defvar cmake-help-command-history nil "Command read history.")
-(defvar cmake-modules '() "List of available topics for --help-module.")
-(defvar cmake-help-module-history nil "Module read history.")
-(defvar cmake-variables '() "List of available topics for --help-variable.")
-(defvar cmake-help-variable-history nil "Variable read history.")
-(defvar cmake-properties '() "List of available topics for --help-property.")
-(defvar cmake-help-property-history nil "Property read history.")
-(defvar cmake-help-complete-history nil "Complete help read history.")
-(defvar cmake-string-to-list-symbol
-  '(("command" cmake-commands cmake-help-command-history)
-    ("module" cmake-modules cmake-help-module-history)
-    ("variable"  cmake-variables cmake-help-variable-history)
-    ("property" cmake-properties cmake-help-property-history)
-    ))
-
-(defun cmake-get-list (listname)
-  "If the value of LISTVAR is nil, run cmake --help-LISTNAME-list
-and store the result as a list in LISTVAR."
-  (let ((listvar (car (cdr (assoc listname cmake-string-to-list-symbol)))))
-    (if (not (symbol-value listvar))
-        (let ((temp-buffer-name "*CMake Temporary*"))
-          (save-window-excursion
-            (cmake-command-run (concat "--help-" listname "-list") nil temp-buffer-name)
-            (with-current-buffer temp-buffer-name
-              (set listvar (cdr (split-string (buffer-substring-no-properties (point-min) (point-max)) "\n" t))))))
-      (symbol-value listvar)
-      ))
-  )
-
-(require 'thingatpt)
-(defun cmake-symbol-at-point ()
-  (let ((symbol (symbol-at-point)))
-    (and (not (null symbol))
-         (symbol-name symbol))))
-
-(defun cmake-help-type (type)
-  (let* ((default-entry (cmake-symbol-at-point))
-         (history (car (cdr (cdr (assoc type cmake-string-to-list-symbol)))))
-         (input (completing-read
-                 (format "CMake %s: " type) ; prompt
-                 (cmake-get-list type) ; completions
-                 nil ; predicate
-                 t   ; require-match
-                 default-entry ; initial-input
-                 history
-                 )))
-    (if (string= input "")
-        (error "No argument given")
-      input))
-  )
-
-;;;###autoload
-(defun cmake-help-command ()
-  "Prints out the help message for the command the cursor is on."
-  (interactive)
-  (cmake-command-run "--help-command" (cmake-help-type "command") "*CMake Help*"))
-
-;;;###autoload
-(defun cmake-help-module ()
-  "Prints out the help message for the module the cursor is on."
-  (interactive)
-  (cmake-command-run "--help-module" (cmake-help-type "module") "*CMake Help*"))
-
-;;;###autoload
-(defun cmake-help-variable ()
-  "Prints out the help message for the variable the cursor is on."
-  (interactive)
-  (cmake-command-run "--help-variable" (cmake-help-type "variable") "*CMake Help*"))
-
-;;;###autoload
-(defun cmake-help-property ()
-  "Prints out the help message for the property the cursor is on."
-  (interactive)
-  (cmake-command-run "--help-property" (cmake-help-type "property") "*CMake Help*"))
-
-;;;###autoload
-(defun cmake-help ()
-  "Queries for any of the four available help topics and prints out the approriate page."
-  (interactive)
-  (let* ((default-entry (cmake-symbol-at-point))
-         (command-list (cmake-get-list "command"))
-         (variable-list (cmake-get-list "variable"))
-         (module-list (cmake-get-list "module"))
-         (property-list (cmake-get-list "property"))
-         (all-words (append command-list variable-list module-list property-list))
-         (input (completing-read
-                 "CMake command/module/variable/property: " ; prompt
-                 all-words ; completions
-                 nil ; predicate
-                 t   ; require-match
-                 default-entry ; initial-input
-                 'cmake-help-complete-history
-                 )))
-    (if (string= input "")
-        (error "No argument given")
-      (if (member input command-list)
-          (cmake-command-run "--help-command" input "*CMake Help*")
-        (if (member input variable-list)
-            (cmake-command-run "--help-variable" input "*CMake Help*")
-          (if (member input module-list)
-              (cmake-command-run "--help-module" input "*CMake Help*")
-            (if (member input property-list)
-                (cmake-command-run "--help-property" input "*CMake Help*")
-              (error "Not a know help topic.") ; this really should not happen
-              ))))))
-  )
-
-;;;###autoload
-(progn
-  (add-to-list 'auto-mode-alist '("CMakeLists\\.txt\\'" . cmake-mode))
-  (add-to-list 'auto-mode-alist '("\\.cmake\\'" . cmake-mode)))
-
-; This file provides cmake-mode.
-(provide 'cmake-mode)
-
-;;; cmake-mode.el ends here
diff --git a/share/cmake-3.2/editors/vim/cmake-indent.vim b/share/cmake-3.2/editors/vim/cmake-indent.vim
deleted file mode 100644
index 6cee9c8..0000000
--- a/share/cmake-3.2/editors/vim/cmake-indent.vim
+++ /dev/null
@@ -1,93 +0,0 @@
-" =============================================================================
-"
-"   Program:   CMake - Cross-Platform Makefile Generator
-"   Module:    $RCSfile$
-"   Language:  VIM
-"   Date:      $Date$
-"   Version:   $Revision$
-"
-" =============================================================================
-
-" Vim indent file
-" Language:     CMake (ft=cmake)
-" Author:       Andy Cedilnik <andy.cedilnik@kitware.com>
-" Maintainer:   Karthik Krishnan <karthik.krishnan@kitware.com>
-" Last Change:  $Date$
-" Version:      $Revision$
-"
-" Licence:      The CMake license applies to this file. See
-"               http://www.cmake.org/licensing
-"               This implies that distribution with Vim is allowed
-
-if exists("b:did_indent")
-  finish
-endif
-let b:did_indent = 1
-
-setlocal indentexpr=CMakeGetIndent(v:lnum)
-setlocal indentkeys+==ENDIF(,ENDFOREACH(,ENDMACRO(,ELSE(,ELSEIF(,ENDWHILE(
-
-" Only define the function once.
-if exists("*CMakeGetIndent")
-  finish
-endif
-
-fun! CMakeGetIndent(lnum)
-  let this_line = getline(a:lnum)
-
-  " Find a non-blank line above the current line.
-  let lnum = a:lnum
-  let lnum = prevnonblank(lnum - 1)
-  let previous_line = getline(lnum)
-
-  " Hit the start of the file, use zero indent.
-  if lnum == 0
-    return 0
-  endif
-
-  let ind = indent(lnum)
-
-  let or = '\|'
-  " Regular expressions used by line indentation function.
-  let cmake_regex_comment = '#.*'
-  let cmake_regex_identifier = '[A-Za-z][A-Za-z0-9_]*'
-  let cmake_regex_quoted = '"\([^"\\]\|\\.\)*"'
-  let cmake_regex_arguments = '\(' . cmake_regex_quoted .
-                    \       or . '\$(' . cmake_regex_identifier . ')' .
-                    \       or . '[^()\\#"]' . or . '\\.' . '\)*'
-
-  let cmake_indent_comment_line = '^\s*' . cmake_regex_comment
-  let cmake_indent_blank_regex = '^\s*$'
-  let cmake_indent_open_regex = '^\s*' . cmake_regex_identifier .
-                    \           '\s*(' . cmake_regex_arguments .
-                    \           '\(' . cmake_regex_comment . '\)\?$'
-
-  let cmake_indent_close_regex = '^' . cmake_regex_arguments .
-                    \            ')\s*' .
-                    \            '\(' . cmake_regex_comment . '\)\?$'
-
-  let cmake_indent_begin_regex = '^\s*\(IF\|MACRO\|FOREACH\|ELSE\|ELSEIF\|WHILE\|FUNCTION\)\s*('
-  let cmake_indent_end_regex = '^\s*\(ENDIF\|ENDFOREACH\|ENDMACRO\|ELSE\|ELSEIF\|ENDWHILE\|ENDFUNCTION\)\s*('
-
-  " Add
-  if previous_line =~? cmake_indent_comment_line " Handle comments
-    let ind = ind
-  else
-    if previous_line =~? cmake_indent_begin_regex
-      let ind = ind + &sw
-    endif
-    if previous_line =~? cmake_indent_open_regex
-      let ind = ind + &sw
-    endif
-  endif
-
-  " Subtract
-  if this_line =~? cmake_indent_end_regex
-    let ind = ind - &sw
-  endif
-  if previous_line =~? cmake_indent_close_regex
-    let ind = ind - &sw
-  endif
-
-  return ind
-endfun
diff --git a/share/cmake-3.2/editors/vim/cmake-syntax.vim b/share/cmake-3.2/editors/vim/cmake-syntax.vim
deleted file mode 100644
index 3e4a122..0000000
--- a/share/cmake-3.2/editors/vim/cmake-syntax.vim
+++ /dev/null
@@ -1,89 +0,0 @@
-" =============================================================================
-"
-"   Program:   CMake - Cross-Platform Makefile Generator
-"   Module:    $RCSfile$
-"   Language:  VIM
-"   Date:      $Date$
-"   Version:   $Revision$
-"
-" =============================================================================
-
-" Vim syntax file
-" Language:     CMake
-" Author:       Andy Cedilnik <andy.cedilnik@kitware.com>
-" Maintainer:   Karthik Krishnan <karthik.krishnan@kitware.com>
-" Last Change:  $Date$
-" Version:      $Revision$
-"
-" Licence:      The CMake license applies to this file. See
-"               http://www.cmake.org/licensing
-"               This implies that distribution with Vim is allowed
-
-" For version 5.x: Clear all syntax items
-" For version 6.x: Quit when a syntax file was already loaded
-if version < 600
-  syntax clear
-elseif exists("b:current_syntax")
-  finish
-endif
-
-syn case ignore
-syn match cmakeEscaped /\(\\\\\|\\"\|\\n\|\\t\)/ contained
-syn region cmakeComment start="#" end="$" contains=cmakeTodo
-syn region cmakeRegistry start=/\[/ end=/]/
-            \ contained oneline contains=CONTAINED,cmakeTodo,cmakeEscaped
-syn region cmakeVariableValue start=/\${/ end=/}/
-            \ contained oneline contains=CONTAINED,cmakeTodo
-syn region cmakeEnvironment start=/\$ENV{/ end=/}/
-            \ contained oneline contains=CONTAINED,cmakeTodo
-syn region cmakeString start=/"/ end=/"/
-            \ contains=CONTAINED,cmakeTodo,cmakeOperators
-syn region cmakeArguments start=/(/ end=/)/
-            \ contains=ALLBUT,cmakeArguments,cmakeTodo
-syn keyword cmakeSystemVariables
-            \ WIN32 UNIX APPLE CYGWIN BORLAND MINGW MSVC MSVC_IDE MSVC60 MSVC70 MSVC71 MSVC80 MSVC90
-syn keyword cmakeOperators
-            \ ABSOLUTE AND BOOL CACHE COMMAND DEFINED DOC EQUAL EXISTS EXT FALSE GREATER INTERNAL LESS MATCHES NAME NAMES NAME_WE NOT OFF ON OR PATH PATHS PROGRAM STREQUAL STRGREATER STRING STRLESS TRUE
-            \ contained
-syn keyword cmakeDeprecated ABSTRACT_FILES BUILD_NAME SOURCE_FILES SOURCE_FILES_REMOVE VTK_MAKE_INSTANTIATOR VTK_WRAP_JAVA VTK_WRAP_PYTHON VTK_WRAP_TCL WRAP_EXCLUDE_FILES
-           \ nextgroup=cmakeArguments
-
-" The keywords are generated as:  cmake --help-command-list | tr "\n" " " | tr "[:lower:]" "[:upper:]"
-syn keyword cmakeStatement
-            \ ADD_COMPILE_OPTIONS ADD_CUSTOM_COMMAND ADD_CUSTOM_TARGET ADD_DEFINITIONS ADD_DEPENDENCIES ADD_EXECUTABLE ADD_LIBRARY ADD_SUBDIRECTORY ADD_TEST AUX_SOURCE_DIRECTORY BREAK BUILD_COMMAND BUILD_NAME CMAKE_HOST_SYSTEM_INFORMATION CMAKE_MINIMUM_REQUIRED CMAKE_POLICY CONFIGURE_FILE CREATE_TEST_SOURCELIST CTEST_BUILD CTEST_CONFIGURE CTEST_COVERAGE CTEST_EMPTY_BINARY_DIRECTORY CTEST_MEMCHECK CTEST_READ_CUSTOM_FILES CTEST_RUN_SCRIPT CTEST_SLEEP CTEST_START CTEST_SUBMIT CTEST_TEST CTEST_UPDATE CTEST_UPLOAD DEFINE_PROPERTY ELSE ELSEIF ENABLE_LANGUAGE ENABLE_TESTING ENDFOREACH ENDFUNCTION ENDIF ENDMACRO ENDWHILE EXEC_PROGRAM EXECUTE_PROCESS EXPORT EXPORT_LIBRARY_DEPENDENCIES FILE FIND_FILE FIND_LIBRARY FIND_PACKAGE FIND_PATH FIND_PROGRAM FLTK_WRAP_UI FOREACH FUNCTION GET_CMAKE_PROPERTY GET_DIRECTORY_PROPERTY GET_FILENAME_COMPONENT GET_PROPERTY GET_SOURCE_FILE_PROPERTY GET_TARGET_PROPERTY GET_TEST_PROPERTY IF INCLUDE INCLUDE_DIRECTORIES INCLUDE_EXTERNAL_MSPROJECT INCLUDE_REGULAR_EXPRESSION INSTALL INSTALL_FILES INSTALL_PROGRAMS INSTALL_TARGETS LINK_DIRECTORIES LINK_LIBRARIES LIST LOAD_CACHE LOAD_COMMAND MACRO MAKE_DIRECTORY MARK_AS_ADVANCED MATH MESSAGE OPTION OUTPUT_REQUIRED_FILES PROJECT QT_WRAP_CPP QT_WRAP_UI REMOVE REMOVE_DEFINITIONS RETURN SEPARATE_ARGUMENTS SET SET_DIRECTORY_PROPERTIES SET_PROPERTY SET_SOURCE_FILES_PROPERTIES SET_TARGET_PROPERTIES SET_TESTS_PROPERTIES SITE_NAME SOURCE_GROUP STRING SUBDIR_DEPENDS SUBDIRS TARGET_COMPILE_DEFINITIONS TARGET_COMPILE_FEATURES TARGET_COMPILE_OPTIONS TARGET_INCLUDE_DIRECTORIES TARGET_LINK_LIBRARIES TARGET_SOURCES TRY_COMPILE TRY_RUN UNSET USE_MANGLED_MESA UTILITY_SOURCE VARIABLE_REQUIRES VARIABLE_WATCH WHILE WRITE_FILE
-            \ nextgroup=cmakeArguments
-syn keyword cmakeTodo
-            \ TODO FIXME XXX
-            \ contained
-
-" Define the default highlighting.
-" For version 5.7 and earlier: only when not done already
-" For version 5.8 and later: only when an item doesn't have highlighting yet
-if version >= 508 || !exists("did_cmake_syntax_inits")
-  if version < 508
-    let did_cmake_syntax_inits = 1
-    command -nargs=+ HiLink hi link <args>
-  else
-    command -nargs=+ HiLink hi def link <args>
-  endif
-
-  HiLink cmakeStatement Statement
-  HiLink cmakeComment Comment
-  HiLink cmakeString String
-  HiLink cmakeVariableValue Type
-  HiLink cmakeRegistry Underlined
-  HiLink cmakeArguments Identifier
-  HiLink cmakeArgument Constant
-  HiLink cmakeEnvironment Special
-  HiLink cmakeOperators Operator
-  HiLink cmakeMacro PreProc
-  HiLink cmakeError Error
-  HiLink cmakeTodo TODO
-  HiLink cmakeEscaped Special
-
-  delcommand HiLink
-endif
-
-let b:current_syntax = "cmake"
-
-"EOF"
diff --git a/share/cmake-3.2/include/cmCPluginAPI.h b/share/cmake-3.2/include/cmCPluginAPI.h
deleted file mode 100644
index 5c832c3..0000000
--- a/share/cmake-3.2/include/cmCPluginAPI.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/*============================================================================
-  CMake - Cross Platform Makefile Generator
-  Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
-
-  Distributed under the OSI-approved BSD License (the "License");
-  see accompanying file Copyright.txt for details.
-
-  This software is distributed WITHOUT ANY WARRANTY; without even the
-  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  See the License for more information.
-============================================================================*/
-/* This header file defines the API that loadable commands can use. In many
-   of these commands C++ instances of cmMakefile of cmSourceFile are passed
-   in as arguments or returned. In these cases they are passed as a void *
-   argument. In the function prototypes mf is used to represent a makefile
-   and sf is used to represent a source file. The functions are grouped
-   loosely into four groups 1) Utility 2) cmMakefile 3) cmSourceFile 4)
-   cmSystemTools. Within each grouping functions are listed alphabetically */
-/*=========================================================================*/
-#ifndef cmCPluginAPI_h
-#define cmCPluginAPI_h
-
-#define CMAKE_VERSION_MAJOR 2
-#define CMAKE_VERSION_MINOR 5
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef __WATCOMC__
-#define CCONV __cdecl
-#else
-#define CCONV
-#endif
-/*=========================================================================
-this is the structure of function entry points that a plugin may call. This
-structure must be kept in sync with the static decaled at the bottom of
-cmCPLuginAPI.cxx
-=========================================================================*/
-typedef struct
-{
-  /*=========================================================================
-  Here we define the set of functions that a plugin may call. The first goup
-  of functions are utility functions that are specific to the plugin API
-  =========================================================================*/
-  /* set/Get the ClientData in the cmLoadedCommandInfo structure, this is how
-     information is passed from the InitialPass to FInalPass for commands
-     that need a FinalPass and need information from the InitialPass */
-  void *(CCONV *GetClientData) (void *info);
-  /* return the summed size in characters of all the arguments */
-  int   (CCONV *GetTotalArgumentSize) (int argc, char **argv);
-  /* free all the memory associated with an argc, argv pair */
-  void  (CCONV *FreeArguments) (int argc, char **argv);
-  /* set/Get the ClientData in the cmLoadedCommandInfo structure, this is how
-     information is passed from the InitialPass to FInalPass for commands
-     that need a FinalPass and need information from the InitialPass */
-  void  (CCONV *SetClientData) (void *info, void *cd);
-  /* when an error occurs, call this function to set the error string */
-  void  (CCONV *SetError) (void *info, const char *err);
-
-  /*=========================================================================
-  The following functions all directly map to methods in the cmMakefile
-  class. See cmMakefile.h for descriptions of what each method does. All of
-  these methods take the void * makefile pointer as their first argument.
-  =========================================================================*/
-  void  (CCONV *AddCacheDefinition) (void *mf, const char* name,
-                               const char* value,
-                               const char* doc, int cachetype);
-  void  (CCONV *AddCustomCommand) (void *mf, const char* source,
-                             const char* command,
-                             int numArgs, const char **args,
-                             int numDepends, const char **depends,
-                             int numOutputs, const char **outputs,
-                             const char *target);
-  void  (CCONV *AddDefineFlag) (void *mf, const char* definition);
-  void  (CCONV *AddDefinition) (void *mf, const char* name,
-                                const char* value);
-  void  (CCONV *AddExecutable) (void *mf, const char *exename,
-                         int numSrcs, const char **srcs, int win32);
-  void  (CCONV *AddLibrary) (void *mf, const char *libname,
-                       int shared, int numSrcs, const char **srcs);
-  void  (CCONV *AddLinkDirectoryForTarget) (void *mf, const char *tgt,
-                                      const char* d);
-  void  (CCONV *AddLinkLibraryForTarget) (void *mf, const char *tgt,
-                                    const char *libname, int libtype);
-  void  (CCONV *AddUtilityCommand) (void *mf, const char* utilityName,
-                              const char *command, const char *arguments,
-                              int all, int numDepends, const char **depends,
-                              int numOutputs, const char **outputs);
-  int   (CCONV *CommandExists) (void *mf, const char* name);
-  int  (CCONV *ExecuteCommand) (void *mf, const char *name,
-                          int numArgs, const char **args);
-  void  (CCONV *ExpandSourceListArguments) (void *mf,int argc,
-                                      const char **argv,
-                                      int *resArgc, char ***resArgv,
-                                      unsigned int startArgumentIndex);
-  char *(CCONV *ExpandVariablesInString) (void *mf, const char *source,
-                                    int escapeQuotes, int atOnly);
-  unsigned int (CCONV *GetCacheMajorVersion) (void *mf);
-  unsigned int (CCONV *GetCacheMinorVersion) (void *mf);
-  const char*  (CCONV *GetCurrentDirectory) (void *mf);
-  const char*  (CCONV *GetCurrentOutputDirectory) (void *mf);
-  const char*  (CCONV *GetDefinition) (void *mf, const char *def);
-  const char*  (CCONV *GetHomeDirectory) (void *mf);
-  const char*  (CCONV *GetHomeOutputDirectory) (void *mf);
-  unsigned int (CCONV *GetMajorVersion) (void *mf);
-  unsigned int (CCONV *GetMinorVersion) (void *mf);
-  const char*  (CCONV *GetProjectName) (void *mf);
-  const char*  (CCONV *GetStartDirectory) (void *mf);
-  const char*  (CCONV *GetStartOutputDirectory) (void *mf);
-  int          (CCONV *IsOn) (void *mf, const char* name);
-
-
-  /*=========================================================================
-  The following functions are designed to operate or manipulate
-  cmSourceFiles. Please see cmSourceFile.h for additional information on many
-  of these methods. Some of these methods are in cmMakefile.h.
-  =========================================================================*/
-  void *(CCONV *AddSource) (void *mf, void *sf);
-  void *(CCONV *CreateSourceFile) ();
-  void  (CCONV *DestroySourceFile) (void *sf);
-  void *(CCONV *GetSource) (void *mf, const char* sourceName);
-  void  (CCONV *SourceFileAddDepend) (void *sf, const char *depend);
-  const char *(CCONV *SourceFileGetProperty) (void *sf, const char *prop);
-  int   (CCONV *SourceFileGetPropertyAsBool) (void *sf, const char *prop);
-  const char *(CCONV *SourceFileGetSourceName) (void *sf);
-  const char *(CCONV *SourceFileGetFullPath) (void *sf);
-  void  (CCONV *SourceFileSetName) (void *sf, const char* name,
-                             const char* dir,
-                             int numSourceExtensions,
-                             const char **sourceExtensions,
-                             int numHeaderExtensions,
-                             const char **headerExtensions);
-  void  (CCONV *SourceFileSetName2) (void *sf, const char* name,
-                               const char* dir,
-                               const char *ext, int headerFileOnly);
-  void  (CCONV *SourceFileSetProperty) (void *sf, const char *prop,
-                                  const char *value);
-
-
-  /*=========================================================================
-  The following methods are from cmSystemTools.h see that file for specific
-  documentation on each method.
-  =========================================================================*/
-  char  *(CCONV *Capitalized)(const char *);
-  void   (CCONV *CopyFileIfDifferent)(const char *f1, const char *f2);
-  char  *(CCONV *GetFilenameWithoutExtension)(const char *);
-  char  *(CCONV *GetFilenamePath)(const char *);
-  void   (CCONV *RemoveFile)(const char *f1);
-  void   (CCONV *Free)(void *);
-
-  /*=========================================================================
-    The following are new functions added after 1.6
-  =========================================================================*/
-  void  (CCONV *AddCustomCommandToOutput) (void *mf, const char* output,
-                                     const char* command,
-                                     int numArgs, const char **args,
-                                     const char* main_dependency,
-                                     int numDepends, const char **depends);
-  void  (CCONV *AddCustomCommandToTarget) (void *mf, const char* target,
-                                     const char* command,
-                                     int numArgs, const char **args,
-                                     int commandType);
-
-  /* display status information */
-  void  (CCONV *DisplaySatus) (void *info, const char *message);
-
-  /* new functions added after 2.4 */
-  void *(CCONV *CreateNewSourceFile) (void *mf);
-  void (CCONV *DefineSourceFileProperty) (void *mf, const char *name,
-                                          const char *briefDocs,
-                                          const char *longDocs,
-                                          int chained);
-
-  /* this is the end of the C function stub API structure */
-} cmCAPI;
-
-
-/*=========================================================================
-CM_PLUGIN_EXPORT should be used by plugins
-=========================================================================*/
-#ifdef _WIN32
-#define CM_PLUGIN_EXPORT  __declspec( dllexport )
-#else
-#define CM_PLUGIN_EXPORT
-#endif
-
-/*=========================================================================
-define the different types of cache entries, see cmCacheManager.h for more
-information
-=========================================================================*/
-#define CM_CACHE_BOOL 0
-#define CM_CACHE_PATH 1
-#define CM_CACHE_FILEPATH 2
-#define CM_CACHE_STRING 3
-#define CM_CACHE_INTERNAL 4
-#define CM_CACHE_STATIC 5
-
-/*=========================================================================
-define the different types of compiles a library may be
-=========================================================================*/
-#define CM_LIBRARY_GENERAL 0
-#define CM_LIBRARY_DEBUG 1
-#define CM_LIBRARY_OPTIMIZED 2
-
-/*=========================================================================
-define the different types of custom commands for a target
-=========================================================================*/
-#define CM_PRE_BUILD  0
-#define CM_PRE_LINK   1
-#define CM_POST_BUILD 2
-
-/*=========================================================================
-Finally we define the key data structures and function prototypes
-=========================================================================*/
-  typedef const char* (CCONV *CM_DOC_FUNCTION)();
-  typedef int (CCONV *CM_INITIAL_PASS_FUNCTION)(void *info, void *mf,
-                                          int argc, char *[]);
-  typedef void (CCONV *CM_FINAL_PASS_FUNCTION)(void *info, void *mf);
-  typedef void (CCONV *CM_DESTRUCTOR_FUNCTION)(void *info);
-
-  typedef struct {
-    unsigned long reserved1; /* Reserved for future use.  DO NOT USE.  */
-    unsigned long reserved2; /* Reserved for future use.  DO NOT USE.  */
-    cmCAPI *CAPI;
-    int m_Inherited; /* this ivar is no longer used in CMake 2.2 or later */
-    CM_INITIAL_PASS_FUNCTION InitialPass;
-    CM_FINAL_PASS_FUNCTION FinalPass;
-    CM_DESTRUCTOR_FUNCTION Destructor;
-    CM_DOC_FUNCTION GetTerseDocumentation;
-    CM_DOC_FUNCTION GetFullDocumentation;
-    const char *Name;
-    char *Error;
-    void *ClientData;
-  } cmLoadedCommandInfo;
-
-  typedef void (CCONV *CM_INIT_FUNCTION)(cmLoadedCommandInfo *);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/share/cmake-3.6/Help/command/FIND_XXX.txt b/share/cmake-3.6/Help/command/FIND_XXX.txt
new file mode 100644
index 0000000..bd4d295
--- /dev/null
+++ b/share/cmake-3.6/Help/command/FIND_XXX.txt
@@ -0,0 +1,119 @@
+A short-hand signature is:
+
+.. parsed-literal::
+
+   |FIND_XXX| (<VAR> name1 [path1 path2 ...])
+
+The general signature is:
+
+.. parsed-literal::
+
+   |FIND_XXX| (
+             <VAR>
+             name | |NAMES|
+             [HINTS path1 [path2 ... ENV var]]
+             [PATHS path1 [path2 ... ENV var]]
+             [PATH_SUFFIXES suffix1 [suffix2 ...]]
+             [DOC "cache documentation string"]
+             [NO_DEFAULT_PATH]
+             [NO_CMAKE_ENVIRONMENT_PATH]
+             [NO_CMAKE_PATH]
+             [NO_SYSTEM_ENVIRONMENT_PATH]
+             [NO_CMAKE_SYSTEM_PATH]
+             [CMAKE_FIND_ROOT_PATH_BOTH |
+              ONLY_CMAKE_FIND_ROOT_PATH |
+              NO_CMAKE_FIND_ROOT_PATH]
+            )
+
+This command is used to find a |SEARCH_XXX_DESC|.
+A cache entry named by ``<VAR>`` is created to store the result
+of this command.
+If the |SEARCH_XXX| is found the result is stored in the variable
+and the search will not be repeated unless the variable is cleared.
+If nothing is found, the result will be
+``<VAR>-NOTFOUND``, and the search will be attempted again the
+next time |FIND_XXX| is invoked with the same variable.
+
+Options include:
+
+``NAMES``
+  Specify one or more possible names for the |SEARCH_XXX|.
+
+  When using this to specify names with and without a version
+  suffix, we recommend specifying the unversioned name first
+  so that locally-built packages can be found before those
+  provided by distributions.
+
+``HINTS``, ``PATHS``
+  Specify directories to search in addition to the default locations.
+  The ``ENV var`` sub-option reads paths from a system environment
+  variable.
+
+``PATH_SUFFIXES``
+  Specify additional subdirectories to check below each directory
+  location otherwise considered.
+
+``DOC``
+  Specify the documentation string for the ``<VAR>`` cache entry.
+
+If ``NO_DEFAULT_PATH`` is specified, then no additional paths are
+added to the search.
+If ``NO_DEFAULT_PATH`` is not specified, the search process is as follows:
+
+.. |CMAKE_PREFIX_PATH_XXX_SUBDIR| replace::
+   |prefix_XXX_SUBDIR| for each ``<prefix>`` in :variable:`CMAKE_PREFIX_PATH`
+
+.. |SYSTEM_ENVIRONMENT_PREFIX_PATH_XXX_SUBDIR| replace::
+   |prefix_XXX_SUBDIR| for each ``<prefix>/[s]bin`` in ``PATH``, and
+   |entry_XXX_SUBDIR| for other entries in ``PATH``
+
+.. |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR| replace::
+   |prefix_XXX_SUBDIR| for each ``<prefix>`` in
+   :variable:`CMAKE_SYSTEM_PREFIX_PATH`
+
+1. Search paths specified in cmake-specific cache variables.
+   These are intended to be used on the command line with a ``-DVAR=value``.
+   This can be skipped if ``NO_CMAKE_PATH`` is passed.
+
+   * |CMAKE_PREFIX_PATH_XXX|
+   * |CMAKE_XXX_PATH|
+   * |CMAKE_XXX_MAC_PATH|
+
+2. Search paths specified in cmake-specific environment variables.
+   These are intended to be set in the user's shell configuration.
+   This can be skipped if ``NO_CMAKE_ENVIRONMENT_PATH`` is passed.
+
+   * |CMAKE_PREFIX_PATH_XXX|
+   * |CMAKE_XXX_PATH|
+   * |CMAKE_XXX_MAC_PATH|
+
+3. Search the paths specified by the ``HINTS`` option.
+   These should be paths computed by system introspection, such as a
+   hint provided by the location of another item already found.
+   Hard-coded guesses should be specified with the ``PATHS`` option.
+
+4. Search the standard system environment variables.
+   This can be skipped if ``NO_SYSTEM_ENVIRONMENT_PATH`` is an argument.
+
+   * |SYSTEM_ENVIRONMENT_PATH_XXX|
+
+5. Search cmake variables defined in the Platform files
+   for the current system.  This can be skipped if ``NO_CMAKE_SYSTEM_PATH``
+   is passed.
+
+   * |CMAKE_SYSTEM_PREFIX_PATH_XXX|
+   * |CMAKE_SYSTEM_XXX_PATH|
+   * |CMAKE_SYSTEM_XXX_MAC_PATH|
+
+6. Search the paths specified by the PATHS option
+   or in the short-hand version of the command.
+   These are typically hard-coded guesses.
+
+.. |FIND_ARGS_XXX| replace:: <VAR> NAMES name
+
+On OS X the :variable:`CMAKE_FIND_FRAMEWORK` and
+:variable:`CMAKE_FIND_APPBUNDLE` variables determine the order of
+preference between Apple-style and unix-style package components.
+
+.. include:: FIND_XXX_ROOT.txt
+.. include:: FIND_XXX_ORDER.txt
diff --git a/share/cmake-3.2/Help/command/FIND_XXX_ORDER.txt b/share/cmake-3.6/Help/command/FIND_XXX_ORDER.txt
similarity index 100%
rename from share/cmake-3.2/Help/command/FIND_XXX_ORDER.txt
rename to share/cmake-3.6/Help/command/FIND_XXX_ORDER.txt
diff --git a/share/cmake-3.6/Help/command/FIND_XXX_ROOT.txt b/share/cmake-3.6/Help/command/FIND_XXX_ROOT.txt
new file mode 100644
index 0000000..fab2303
--- /dev/null
+++ b/share/cmake-3.6/Help/command/FIND_XXX_ROOT.txt
@@ -0,0 +1,29 @@
+The CMake variable :variable:`CMAKE_FIND_ROOT_PATH` specifies one or more
+directories to be prepended to all other search directories.  This
+effectively "re-roots" the entire search under given locations.
+Paths which are descendants of the :variable:`CMAKE_STAGING_PREFIX` are excluded
+from this re-rooting, because that variable is always a path on the host system.
+By default the :variable:`CMAKE_FIND_ROOT_PATH` is empty.
+
+The :variable:`CMAKE_SYSROOT` variable can also be used to specify exactly one
+directory to use as a prefix.  Setting :variable:`CMAKE_SYSROOT` also has other
+effects.  See the documentation for that variable for more.
+
+These variables are especially useful when cross-compiling to
+point to the root directory of the target environment and CMake will
+search there too.  By default at first the directories listed in
+:variable:`CMAKE_FIND_ROOT_PATH` are searched, then the :variable:`CMAKE_SYSROOT`
+directory is searched, and then the non-rooted directories will be
+searched.  The default behavior can be adjusted by setting
+|CMAKE_FIND_ROOT_PATH_MODE_XXX|.  This behavior can be manually
+overridden on a per-call basis using options:
+
+``CMAKE_FIND_ROOT_PATH_BOTH``
+  Search in the order described above.
+
+``NO_CMAKE_FIND_ROOT_PATH``
+  Do not use the :variable:`CMAKE_FIND_ROOT_PATH` variable.
+
+``ONLY_CMAKE_FIND_ROOT_PATH``
+  Search only the re-rooted directories and directories below
+  :variable:`CMAKE_STAGING_PREFIX`.
diff --git a/share/cmake-3.2/Help/command/add_compile_options.rst b/share/cmake-3.6/Help/command/add_compile_options.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/add_compile_options.rst
rename to share/cmake-3.6/Help/command/add_compile_options.rst
diff --git a/share/cmake-3.6/Help/command/add_custom_command.rst b/share/cmake-3.6/Help/command/add_custom_command.rst
new file mode 100644
index 0000000..d421364
--- /dev/null
+++ b/share/cmake-3.6/Help/command/add_custom_command.rst
@@ -0,0 +1,211 @@
+add_custom_command
+------------------
+
+Add a custom build rule to the generated build system.
+
+There are two main signatures for ``add_custom_command``.
+
+Generating Files
+^^^^^^^^^^^^^^^^
+
+The first signature is for adding a custom command to produce an output::
+
+  add_custom_command(OUTPUT output1 [output2 ...]
+                     COMMAND command1 [ARGS] [args1...]
+                     [COMMAND command2 [ARGS] [args2...] ...]
+                     [MAIN_DEPENDENCY depend]
+                     [DEPENDS [depends...]]
+                     [BYPRODUCTS [files...]]
+                     [IMPLICIT_DEPENDS <lang1> depend1
+                                      [<lang2> depend2] ...]
+                     [WORKING_DIRECTORY dir]
+                     [COMMENT comment]
+                     [VERBATIM] [APPEND] [USES_TERMINAL])
+
+This defines a command to generate specified ``OUTPUT`` file(s).
+A target created in the same directory (``CMakeLists.txt`` file)
+that specifies any output of the custom command as a source file
+is given a rule to generate the file using the command at build time.
+Do not list the output in more than one independent target that
+may build in parallel or the two instances of the rule may conflict
+(instead use the :command:`add_custom_target` command to drive the
+command and make the other targets depend on that one).
+In makefile terms this creates a new target in the following form::
+
+  OUTPUT: MAIN_DEPENDENCY DEPENDS
+          COMMAND
+
+The options are:
+
+``APPEND``
+  Append the ``COMMAND`` and ``DEPENDS`` option values to the custom
+  command for the first output specified.  There must have already
+  been a previous call to this command with the same output.
+  The ``COMMENT``, ``MAIN_DEPENDENCY``, and ``WORKING_DIRECTORY``
+  options are currently ignored when APPEND is given, but may be
+  used in the future.
+
+``BYPRODUCTS``
+  Specify the files the command is expected to produce but whose
+  modification time may or may not be newer than the dependencies.
+  If a byproduct name is a relative path it will be interpreted
+  relative to the build tree directory corresponding to the
+  current source directory.
+  Each byproduct file will be marked with the :prop_sf:`GENERATED`
+  source file property automatically.
+
+  Explicit specification of byproducts is supported by the
+  :generator:`Ninja` generator to tell the ``ninja`` build tool
+  how to regenerate byproducts when they are missing.  It is
+  also useful when other build rules (e.g. custom commands)
+  depend on the byproducts.  Ninja requires a build rule for any
+  generated file on which another rule depends even if there are
+  order-only dependencies to ensure the byproducts will be
+  available before their dependents build.
+
+  The ``BYPRODUCTS`` option is ignored on non-Ninja generators
+  except to mark byproducts ``GENERATED``.
+
+``COMMAND``
+  Specify the command-line(s) to execute at build time.
+  If more than one ``COMMAND`` is specified they will be executed in order,
+  but *not* necessarily composed into a stateful shell or batch script.
+  (To run a full script, use the :command:`configure_file` command or the
+  :command:`file(GENERATE)` command to create it, and then specify
+  a ``COMMAND`` to launch it.)
+  The optional ``ARGS`` argument is for backward compatibility and
+  will be ignored.
+
+  If ``COMMAND`` specifies an executable target name (created by the
+  :command:`add_executable` command) it will automatically be replaced
+  by the location of the executable created at build time. If set, the
+  :prop_tgt:`CROSSCOMPILING_EMULATOR` executable target property will
+  also be prepended to the command to allow the executable to run on
+  the host.
+  (Use the ``TARGET_FILE``
+  :manual:`generator expression <cmake-generator-expressions(7)>` to
+  reference an executable later in the command line.)
+  Additionally a target-level dependency will be added so that the
+  executable target will be built before any target using this custom
+  command.  However this does NOT add a file-level dependency that
+  would cause the custom command to re-run whenever the executable is
+  recompiled.
+
+  Arguments to ``COMMAND`` may use
+  :manual:`generator expressions <cmake-generator-expressions(7)>`.
+  References to target names in generator expressions imply target-level
+  dependencies, but NOT file-level dependencies.  List target names with
+  the ``DEPENDS`` option to add file-level dependencies.
+
+``COMMENT``
+  Display the given message before the commands are executed at
+  build time.
+
+``DEPENDS``
+  Specify files on which the command depends.  If any dependency is
+  an ``OUTPUT`` of another custom command in the same directory
+  (``CMakeLists.txt`` file) CMake automatically brings the other
+  custom command into the target in which this command is built.
+  If ``DEPENDS`` is not specified the command will run whenever
+  the ``OUTPUT`` is missing; if the command does not actually
+  create the ``OUTPUT`` then the rule will always run.
+  If ``DEPENDS`` specifies any target (created by the
+  :command:`add_custom_target`, :command:`add_executable`, or
+  :command:`add_library` command) a target-level dependency is
+  created to make sure the target is built before any target
+  using this custom command.  Additionally, if the target is an
+  executable or library a file-level dependency is created to
+  cause the custom command to re-run whenever the target is
+  recompiled.
+
+  Arguments to ``DEPENDS`` may use
+  :manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+``IMPLICIT_DEPENDS``
+  Request scanning of implicit dependencies of an input file.
+  The language given specifies the programming language whose
+  corresponding dependency scanner should be used.
+  Currently only ``C`` and ``CXX`` language scanners are supported.
+  The language has to be specified for every file in the
+  ``IMPLICIT_DEPENDS`` list.  Dependencies discovered from the
+  scanning are added to those of the custom command at build time.
+  Note that the ``IMPLICIT_DEPENDS`` option is currently supported
+  only for Makefile generators and will be ignored by other generators.
+
+``MAIN_DEPENDENCY``
+  Specify the primary input source file to the command.  This is
+  treated just like any value given to the ``DEPENDS`` option
+  but also suggests to Visual Studio generators where to hang
+  the custom command.  At most one custom command may specify a
+  given source file as its main dependency.
+
+``OUTPUT``
+  Specify the output files the command is expected to produce.
+  If an output name is a relative path it will be interpreted
+  relative to the build tree directory corresponding to the
+  current source directory.
+  Each output file will be marked with the :prop_sf:`GENERATED`
+  source file property automatically.
+  If the output of the custom command is not actually created
+  as a file on disk it should be marked with the :prop_sf:`SYMBOLIC`
+  source file property.
+
+``USES_TERMINAL``
+  The command will be given direct access to the terminal if possible.
+  With the :generator:`Ninja` generator, this places the command in
+  the ``console`` :prop_gbl:`pool <JOB_POOLS>`.
+
+``VERBATIM``
+  All arguments to the commands will be escaped properly for the
+  build tool so that the invoked command receives each argument
+  unchanged.  Note that one level of escapes is still used by the
+  CMake language processor before add_custom_command even sees the
+  arguments.  Use of ``VERBATIM`` is recommended as it enables
+  correct behavior.  When ``VERBATIM`` is not given the behavior
+  is platform specific because there is no protection of
+  tool-specific special characters.
+
+``WORKING_DIRECTORY``
+  Execute the command with the given current working directory.
+  If it is a relative path it will be interpreted relative to the
+  build tree directory corresponding to the current source directory.
+
+Build Events
+^^^^^^^^^^^^
+
+The second signature adds a custom command to a target such as a
+library or executable.  This is useful for performing an operation
+before or after building the target.  The command becomes part of the
+target and will only execute when the target itself is built.  If the
+target is already built, the command will not execute.
+
+::
+
+  add_custom_command(TARGET <target>
+                     PRE_BUILD | PRE_LINK | POST_BUILD
+                     COMMAND command1 [ARGS] [args1...]
+                     [COMMAND command2 [ARGS] [args2...] ...]
+                     [BYPRODUCTS [files...]]
+                     [WORKING_DIRECTORY dir]
+                     [COMMENT comment]
+                     [VERBATIM] [USES_TERMINAL])
+
+This defines a new command that will be associated with building the
+specified ``<target>``.  The ``<target>`` must be defined in the current
+directory; targets defined in other directories may not be specified.
+
+When the command will happen is determined by which
+of the following is specified:
+
+``PRE_BUILD``
+  Run before any other rules are executed within the target.
+  This is supported only on Visual Studio 7 or later.
+  For all other generators ``PRE_BUILD`` will be treated as
+  ``PRE_LINK``.
+``PRE_LINK``
+  Run after sources have been compiled but before linking the binary
+  or running the librarian or archiver tool of a static library.
+  This is not defined for targets created by the
+  :command:`add_custom_target` command.
+``POST_BUILD``
+  Run after all other rules within the target have been executed.
diff --git a/share/cmake-3.6/Help/command/add_custom_target.rst b/share/cmake-3.6/Help/command/add_custom_target.rst
new file mode 100644
index 0000000..6980d61
--- /dev/null
+++ b/share/cmake-3.6/Help/command/add_custom_target.rst
@@ -0,0 +1,114 @@
+add_custom_target
+-----------------
+
+Add a target with no output so it will always be built.
+
+::
+
+  add_custom_target(Name [ALL] [command1 [args1...]]
+                    [COMMAND command2 [args2...] ...]
+                    [DEPENDS depend depend depend ... ]
+                    [BYPRODUCTS [files...]]
+                    [WORKING_DIRECTORY dir]
+                    [COMMENT comment]
+                    [VERBATIM] [USES_TERMINAL]
+                    [SOURCES src1 [src2...]])
+
+Adds a target with the given name that executes the given commands.
+The target has no output file and is *always considered out of date*
+even if the commands try to create a file with the name of the target.
+Use the :command:`add_custom_command` command to generate a file with
+dependencies.  By default nothing depends on the custom target.  Use
+the :command:`add_dependencies` command to add dependencies to or
+from other targets.
+
+The options are:
+
+``ALL``
+  Indicate that this target should be added to the default build
+  target so that it will be run every time (the command cannot be
+  called ``ALL``).
+
+``BYPRODUCTS``
+  Specify the files the command is expected to produce but whose
+  modification time may or may not be updated on subsequent builds.
+  If a byproduct name is a relative path it will be interpreted
+  relative to the build tree directory corresponding to the
+  current source directory.
+  Each byproduct file will be marked with the :prop_sf:`GENERATED`
+  source file property automatically.
+
+  Explicit specification of byproducts is supported by the
+  :generator:`Ninja` generator to tell the ``ninja`` build tool
+  how to regenerate byproducts when they are missing.  It is
+  also useful when other build rules (e.g. custom commands)
+  depend on the byproducts.  Ninja requires a build rule for any
+  generated file on which another rule depends even if there are
+  order-only dependencies to ensure the byproducts will be
+  available before their dependents build.
+
+  The ``BYPRODUCTS`` option is ignored on non-Ninja generators
+  except to mark byproducts ``GENERATED``.
+
+``COMMAND``
+  Specify the command-line(s) to execute at build time.
+  If more than one ``COMMAND`` is specified they will be executed in order,
+  but *not* necessarily composed into a stateful shell or batch script.
+  (To run a full script, use the :command:`configure_file` command or the
+  :command:`file(GENERATE)` command to create it, and then specify
+  a ``COMMAND`` to launch it.)
+
+  If ``COMMAND`` specifies an executable target name (created by the
+  :command:`add_executable` command) it will automatically be replaced
+  by the location of the executable created at build time. If set, the
+  :prop_tgt:`CROSSCOMPILING_EMULATOR` executable target property will
+  also be prepended to the command to allow the executable to run on
+  the host.
+  Additionally a target-level dependency will be added so that the
+  executable target will be built before this custom target.
+
+  Arguments to ``COMMAND`` may use
+  :manual:`generator expressions <cmake-generator-expressions(7)>`.
+  References to target names in generator expressions imply target-level
+  dependencies.
+
+  The command and arguments are optional and if not specified an empty
+  target will be created.
+
+``COMMENT``
+  Display the given message before the commands are executed at
+  build time.
+
+``DEPENDS``
+  Reference files and outputs of custom commands created with
+  :command:`add_custom_command` command calls in the same directory
+  (``CMakeLists.txt`` file).  They will be brought up to date when
+  the target is built.
+
+  Use the :command:`add_dependencies` command to add dependencies
+  on other targets.
+
+``SOURCES``
+  Specify additional source files to be included in the custom target.
+  Specified source files will be added to IDE project files for
+  convenience in editing even if they have no build rules.
+
+``VERBATIM``
+  All arguments to the commands will be escaped properly for the
+  build tool so that the invoked command receives each argument
+  unchanged.  Note that one level of escapes is still used by the
+  CMake language processor before ``add_custom_target`` even sees
+  the arguments.  Use of ``VERBATIM`` is recommended as it enables
+  correct behavior.  When ``VERBATIM`` is not given the behavior
+  is platform specific because there is no protection of
+  tool-specific special characters.
+
+``USES_TERMINAL``
+  The command will be given direct access to the terminal if possible.
+  With the :generator:`Ninja` generator, this places the command in
+  the ``console`` :prop_gbl:`pool <JOB_POOLS>`.
+
+``WORKING_DIRECTORY``
+  Execute the command with the given current working directory.
+  If it is a relative path it will be interpreted relative to the
+  build tree directory corresponding to the current source directory.
diff --git a/share/cmake-3.2/Help/command/add_definitions.rst b/share/cmake-3.6/Help/command/add_definitions.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/add_definitions.rst
rename to share/cmake-3.6/Help/command/add_definitions.rst
diff --git a/share/cmake-3.6/Help/command/add_dependencies.rst b/share/cmake-3.6/Help/command/add_dependencies.rst
new file mode 100644
index 0000000..7a66143
--- /dev/null
+++ b/share/cmake-3.6/Help/command/add_dependencies.rst
@@ -0,0 +1,23 @@
+add_dependencies
+----------------
+
+Add a dependency between top-level targets.
+
+::
+
+  add_dependencies(<target> [<target-dependency>]...)
+
+Make a top-level ``<target>`` depend on other top-level targets to
+ensure that they build before ``<target>`` does.  A top-level target
+is one created by one of the :command:`add_executable`,
+:command:`add_library`, or :command:`add_custom_target` commands
+(but not targets generated by CMake like ``install``).
+
+Dependencies added to an :ref:`imported target <Imported Targets>`
+or an :ref:`interface library <Interface Libraries>` are followed
+transitively in its place since the target itself does not build.
+
+See the ``DEPENDS`` option of :command:`add_custom_target` and
+:command:`add_custom_command` commands for adding file-level
+dependencies in custom rules.  See the :prop_sf:`OBJECT_DEPENDS`
+source file property to add file-level dependencies to object files.
diff --git a/share/cmake-3.6/Help/command/add_executable.rst b/share/cmake-3.6/Help/command/add_executable.rst
new file mode 100644
index 0000000..19ca658
--- /dev/null
+++ b/share/cmake-3.6/Help/command/add_executable.rst
@@ -0,0 +1,80 @@
+add_executable
+--------------
+
+Add an executable to the project using the specified source files.
+
+::
+
+  add_executable(<name> [WIN32] [MACOSX_BUNDLE]
+                 [EXCLUDE_FROM_ALL]
+                 source1 [source2 ...])
+
+Adds an executable target called ``<name>`` to be built from the source
+files listed in the command invocation.  The ``<name>`` corresponds to the
+logical target name and must be globally unique within a project.  The
+actual file name of the executable built is constructed based on
+conventions of the native platform (such as ``<name>.exe`` or just
+``<name>``).
+
+By default the executable file will be created in the build tree
+directory corresponding to the source tree directory in which the
+command was invoked.  See documentation of the
+:prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` target property to change this
+location.  See documentation of the :prop_tgt:`OUTPUT_NAME` target property
+to change the ``<name>`` part of the final file name.
+
+If ``WIN32`` is given the property :prop_tgt:`WIN32_EXECUTABLE` will be
+set on the target created.  See documentation of that target property for
+details.
+
+If ``MACOSX_BUNDLE`` is given the corresponding property will be set on
+the created target.  See documentation of the :prop_tgt:`MACOSX_BUNDLE`
+target property for details.
+
+If ``EXCLUDE_FROM_ALL`` is given the corresponding property will be set on
+the created target.  See documentation of the :prop_tgt:`EXCLUDE_FROM_ALL`
+target property for details.
+
+Source arguments to ``add_executable`` may use "generator expressions" with
+the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
+
+
+--------------------------------------------------------------------------
+
+::
+
+  add_executable(<name> IMPORTED [GLOBAL])
+
+An :ref:`IMPORTED executable target <Imported Targets>` references an
+executable file located outside the project.  No rules are generated to
+build it, and the :prop_tgt:`IMPORTED` target property is ``True``.  The
+target name has scope in the directory in which it is created and below, but
+the ``GLOBAL`` option extends visibility.  It may be referenced like any
+target built within the project.  ``IMPORTED`` executables are useful
+for convenient reference from commands like :command:`add_custom_command`.
+Details about the imported executable are specified by setting properties
+whose names begin in ``IMPORTED_``.  The most important such property is
+:prop_tgt:`IMPORTED_LOCATION` (and its per-configuration version
+:prop_tgt:`IMPORTED_LOCATION_<CONFIG>`) which specifies the location of
+the main executable file on disk.  See documentation of the ``IMPORTED_*``
+properties for more information.
+
+--------------------------------------------------------------------------
+
+::
+
+  add_executable(<name> ALIAS <target>)
+
+Creates an :ref:`Alias Target <Alias Targets>`, such that ``<name>`` can
+be used to refer to ``<target>`` in subsequent commands.  The ``<name>``
+does not appear in the generated buildsystem as a make target.  The
+``<target>`` may not be an :ref:`Imported Target <Imported Targets>` or an
+``ALIAS``.  ``ALIAS`` targets can be used as targets to read properties
+from, executables for custom commands and custom targets.  They can also be
+tested for existence with the regular :command:`if(TARGET)` subcommand.
+The ``<name>`` may not be used to modify properties of ``<target>``, that
+is, it may not be used as the operand of :command:`set_property`,
+:command:`set_target_properties`, :command:`target_link_libraries` etc.
+An ``ALIAS`` target may not be installed or exported.
diff --git a/share/cmake-3.6/Help/command/add_library.rst b/share/cmake-3.6/Help/command/add_library.rst
new file mode 100644
index 0000000..36adcbe
--- /dev/null
+++ b/share/cmake-3.6/Help/command/add_library.rst
@@ -0,0 +1,162 @@
+add_library
+-----------
+
+.. only:: html
+
+   .. contents::
+
+Add a library to the project using the specified source files.
+
+Normal Libraries
+^^^^^^^^^^^^^^^^
+
+::
+
+  add_library(<name> [STATIC | SHARED | MODULE]
+              [EXCLUDE_FROM_ALL]
+              source1 [source2 ...])
+
+Adds a library target called ``<name>`` to be built from the source files
+listed in the command invocation.  The ``<name>`` corresponds to the
+logical target name and must be globally unique within a project.  The
+actual file name of the library built is constructed based on
+conventions of the native platform (such as ``lib<name>.a`` or
+``<name>.lib``).
+
+``STATIC``, ``SHARED``, or ``MODULE`` may be given to specify the type of
+library to be created.  ``STATIC`` libraries are archives of object files
+for use when linking other targets.  ``SHARED`` libraries are linked
+dynamically and loaded at runtime.  ``MODULE`` libraries are plugins that
+are not linked into other targets but may be loaded dynamically at runtime
+using dlopen-like functionality.  If no type is given explicitly the
+type is ``STATIC`` or ``SHARED`` based on whether the current value of the
+variable :variable:`BUILD_SHARED_LIBS` is ``ON``.  For ``SHARED`` and
+``MODULE`` libraries the :prop_tgt:`POSITION_INDEPENDENT_CODE` target
+property is set to ``ON`` automatically.
+A ``SHARED`` library may be marked with the :prop_tgt:`FRAMEWORK`
+target property to create an OS X Framework.
+
+If a library does not export any symbols, it must not be declared as a
+``SHARED`` library.  For example, a Windows resource DLL or a managed C++/CLI
+DLL that exports no unmanaged symbols would need to be a ``MODULE`` library.
+This is because CMake expects a ``SHARED`` library to always have an
+associated import library on Windows.
+
+By default the library file will be created in the build tree directory
+corresponding to the source tree directory in which the command was
+invoked.  See documentation of the :prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY`,
+:prop_tgt:`LIBRARY_OUTPUT_DIRECTORY`, and
+:prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` target properties to change this
+location.  See documentation of the :prop_tgt:`OUTPUT_NAME` target
+property to change the ``<name>`` part of the final file name.
+
+If ``EXCLUDE_FROM_ALL`` is given the corresponding property will be set on
+the created target.  See documentation of the :prop_tgt:`EXCLUDE_FROM_ALL`
+target property for details.
+
+Source arguments to ``add_library`` may use "generator expressions" with
+the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
+
+Imported Libraries
+^^^^^^^^^^^^^^^^^^
+
+::
+
+  add_library(<name> <SHARED|STATIC|MODULE|UNKNOWN> IMPORTED
+              [GLOBAL])
+
+An :ref:`IMPORTED library target <Imported Targets>` references a library
+file located outside the project.  No rules are generated to build it, and
+the :prop_tgt:`IMPORTED` target property is ``True``.  The target name has
+scope in the directory in which it is created and below, but the ``GLOBAL``
+option extends visibility.  It may be referenced like any target built
+within the project.  ``IMPORTED`` libraries are useful for convenient
+reference from commands like :command:`target_link_libraries`.  Details
+about the imported library are specified by setting properties whose names
+begin in ``IMPORTED_`` and ``INTERFACE_``.  The most important such
+property is :prop_tgt:`IMPORTED_LOCATION` (and its per-configuration
+variant :prop_tgt:`IMPORTED_LOCATION_<CONFIG>`) which specifies the
+location of the main library file on disk.  See documentation of the
+``IMPORTED_*`` and ``INTERFACE_*`` properties for more information.
+
+Object Libraries
+^^^^^^^^^^^^^^^^
+
+::
+
+  add_library(<name> OBJECT <src>...)
+
+Creates an :ref:`Object Library <Object Libraries>`.  An object library
+compiles source files but does not archive or link their object files into a
+library.  Instead other targets created by :command:`add_library` or
+:command:`add_executable` may reference the objects using an expression of the
+form ``$<TARGET_OBJECTS:objlib>`` as a source, where ``objlib`` is the
+object library name.  For example:
+
+.. code-block:: cmake
+
+  add_library(... $<TARGET_OBJECTS:objlib> ...)
+  add_executable(... $<TARGET_OBJECTS:objlib> ...)
+
+will include objlib's object files in a library and an executable
+along with those compiled from their own sources.  Object libraries
+may contain only sources that compile, header files, and other files
+that would not affect linking of a normal library (e.g. ``.txt``).
+They may contain custom commands generating such sources, but not
+``PRE_BUILD``, ``PRE_LINK``, or ``POST_BUILD`` commands.  Object libraries
+cannot be imported, exported, installed, or linked.  Some native build
+systems may not like targets that have only object files, so consider
+adding at least one real source file to any target that references
+``$<TARGET_OBJECTS:objlib>``.
+
+Alias Libraries
+^^^^^^^^^^^^^^^
+
+::
+
+  add_library(<name> ALIAS <target>)
+
+Creates an :ref:`Alias Target <Alias Targets>`, such that ``<name>`` can be
+used to refer to ``<target>`` in subsequent commands.  The ``<name>`` does
+not appear in the generatedbuildsystem as a make target.  The ``<target>``
+may not be an :ref:`Imported Target <Imported Targets>` or an ``ALIAS``.
+``ALIAS`` targets can be used as linkable targets and as targets to
+read properties from.  They can also be tested for existence with the
+regular :command:`if(TARGET)` subcommand.  The ``<name>`` may not be used
+to modify properties of ``<target>``, that is, it may not be used as the
+operand of :command:`set_property`, :command:`set_target_properties`,
+:command:`target_link_libraries` etc.  An ``ALIAS`` target may not be
+installed or exported.
+
+Interface Libraries
+^^^^^^^^^^^^^^^^^^^
+
+::
+
+  add_library(<name> INTERFACE [IMPORTED [GLOBAL]])
+
+Creates an :ref:`Interface Library <Interface Libraries>`.  An ``INTERFACE``
+library target does not directly create build output, though it may
+have properties set on it and it may be installed, exported and
+imported. Typically the ``INTERFACE_*`` properties are populated on
+the interface target using the commands:
+
+* :command:`set_property`,
+* :command:`target_link_libraries(INTERFACE)`,
+* :command:`target_include_directories(INTERFACE)`,
+* :command:`target_compile_options(INTERFACE)`,
+* :command:`target_compile_definitions(INTERFACE)`, and
+* :command:`target_sources(INTERFACE)`,
+
+and then it is used as an argument to :command:`target_link_libraries`
+like any other target.
+
+An ``INTERFACE`` :ref:`Imported Target <Imported Targets>` may also be
+created with this signature.  An ``IMPORTED`` library target references a
+library defined outside the project.  The target name has scope in the
+directory in which it is created and below, but the ``GLOBAL`` option
+extends visibility.  It may be referenced like any target built within
+the project.  ``IMPORTED`` libraries are useful for convenient reference
+from commands like :command:`target_link_libraries`.
diff --git a/share/cmake-3.6/Help/command/add_subdirectory.rst b/share/cmake-3.6/Help/command/add_subdirectory.rst
new file mode 100644
index 0000000..e979253
--- /dev/null
+++ b/share/cmake-3.6/Help/command/add_subdirectory.rst
@@ -0,0 +1,36 @@
+add_subdirectory
+----------------
+
+Add a subdirectory to the build.
+
+::
+
+  add_subdirectory(source_dir [binary_dir]
+                   [EXCLUDE_FROM_ALL])
+
+Add a subdirectory to the build.  The source_dir specifies the
+directory in which the source CMakeLists.txt and code files are
+located.  If it is a relative path it will be evaluated with respect
+to the current directory (the typical usage), but it may also be an
+absolute path.  The ``binary_dir`` specifies the directory in which to
+place the output files.  If it is a relative path it will be evaluated
+with respect to the current output directory, but it may also be an
+absolute path.  If ``binary_dir`` is not specified, the value of
+``source_dir``, before expanding any relative path, will be used (the
+typical usage).  The CMakeLists.txt file in the specified source
+directory will be processed immediately by CMake before processing in
+the current input file continues beyond this command.
+
+If the ``EXCLUDE_FROM_ALL`` argument is provided then targets in the
+subdirectory will not be included in the ``ALL`` target of the parent
+directory by default, and will be excluded from IDE project files.
+Users must explicitly build targets in the subdirectory.  This is
+meant for use when the subdirectory contains a separate part of the
+project that is useful but not necessary, such as a set of examples.
+Typically the subdirectory should contain its own :command:`project`
+command invocation so that a full build system will be generated in the
+subdirectory (such as a VS IDE solution file).  Note that inter-target
+dependencies supercede this exclusion.  If a target built by the
+parent project depends on a target in the subdirectory, the dependee
+target will be included in the parent project build system to satisfy
+the dependency.
diff --git a/share/cmake-3.6/Help/command/add_test.rst b/share/cmake-3.6/Help/command/add_test.rst
new file mode 100644
index 0000000..d8a96e9
--- /dev/null
+++ b/share/cmake-3.6/Help/command/add_test.rst
@@ -0,0 +1,66 @@
+add_test
+--------
+
+Add a test to the project to be run by :manual:`ctest(1)`.
+
+::
+
+  add_test(NAME <name> COMMAND <command> [<arg>...]
+           [CONFIGURATIONS <config>...]
+           [WORKING_DIRECTORY <dir>])
+
+Add a test called ``<name>``.  The test name may not contain spaces,
+quotes, or other characters special in CMake syntax.  The options are:
+
+``COMMAND``
+  Specify the test command-line.  If ``<command>`` specifies an
+  executable target (created by :command:`add_executable`) it will
+  automatically be replaced by the location of the executable created
+  at build time.
+
+``CONFIGURATIONS``
+  Restrict execution of the test only to the named configurations.
+
+``WORKING_DIRECTORY``
+  Set the :prop_test:`WORKING_DIRECTORY` test property to
+  specify the working directory in which to execute the test.
+  If not specified the test will be run with the current working
+  directory set to the build directory corresponding to the
+  current source directory.
+
+The given test command is expected to exit with code ``0`` to pass and
+non-zero to fail, or vice-versa if the :prop_test:`WILL_FAIL` test
+property is set.  Any output written to stdout or stderr will be
+captured by :manual:`ctest(1)` but does not affect the pass/fail status
+unless the :prop_test:`PASS_REGULAR_EXPRESSION` or
+:prop_test:`FAIL_REGULAR_EXPRESSION` test property is used.
+
+The ``COMMAND`` and ``WORKING_DIRECTORY`` options may use "generator
+expressions" with the syntax ``$<...>``.  See the
+:manual:`cmake-generator-expressions(7)` manual for available expressions.
+
+Example usage::
+
+  add_test(NAME mytest
+           COMMAND testDriver --config $<CONFIGURATION>
+                              --exe $<TARGET_FILE:myexe>)
+
+This creates a test ``mytest`` whose command runs a ``testDriver`` tool
+passing the configuration name and the full path to the executable
+file produced by target ``myexe``.
+
+.. note::
+
+  CMake will generate tests only if the :command:`enable_testing`
+  command has been invoked.  The :module:`CTest` module invokes the
+  command automatically when the ``BUILD_TESTING`` option is ``ON``.
+
+---------------------------------------------------------------------
+
+::
+
+  add_test(<name> <command> [<arg>...])
+
+Add a test called ``<name>`` with the given command-line.  Unlike
+the above ``NAME`` signature no transformation is performed on the
+command-line to support target names or generator expressions.
diff --git a/share/cmake-3.6/Help/command/aux_source_directory.rst b/share/cmake-3.6/Help/command/aux_source_directory.rst
new file mode 100644
index 0000000..dcd1cdf
--- /dev/null
+++ b/share/cmake-3.6/Help/command/aux_source_directory.rst
@@ -0,0 +1,24 @@
+aux_source_directory
+--------------------
+
+Find all source files in a directory.
+
+::
+
+  aux_source_directory(<dir> <variable>)
+
+Collects the names of all the source files in the specified directory
+and stores the list in the ``<variable>`` provided.  This command is
+intended to be used by projects that use explicit template
+instantiation.  Template instantiation files can be stored in a
+"Templates" subdirectory and collected automatically using this
+command to avoid manually listing all instantiations.
+
+It is tempting to use this command to avoid writing the list of source
+files for a library or executable target.  While this seems to work,
+there is no way for CMake to generate a build system that knows when a
+new source file has been added.  Normally the generated build system
+knows when it needs to rerun CMake because the CMakeLists.txt file is
+modified to add a new source.  When the source is just added to the
+directory without modifying this file, one would have to manually
+rerun CMake to generate a build system incorporating the new file.
diff --git a/share/cmake-3.2/Help/command/break.rst b/share/cmake-3.6/Help/command/break.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/break.rst
rename to share/cmake-3.6/Help/command/break.rst
diff --git a/share/cmake-3.6/Help/command/build_command.rst b/share/cmake-3.6/Help/command/build_command.rst
new file mode 100644
index 0000000..b83edaf
--- /dev/null
+++ b/share/cmake-3.6/Help/command/build_command.rst
@@ -0,0 +1,45 @@
+build_command
+-------------
+
+Get a command line to build the current project.
+This is mainly intended for internal use by the :module:`CTest` module.
+
+.. code-block:: cmake
+
+  build_command(<variable>
+                [CONFIGURATION <config>]
+                [TARGET <target>]
+                [PROJECT_NAME <projname>] # legacy, causes warning
+               )
+
+Sets the given ``<variable>`` to a command-line string of the form::
+
+ <cmake> --build . [--config <config>] [--target <target>] [-- -i]
+
+where ``<cmake>`` is the location of the :manual:`cmake(1)` command-line
+tool, and ``<config>`` and ``<target>`` are the values provided to the
+``CONFIGURATION`` and ``TARGET`` options, if any.  The trailing ``-- -i``
+option is added for :ref:`Makefile Generators` if policy :policy:`CMP0061`
+is not set to ``NEW``.
+
+When invoked, this ``cmake --build`` command line will launch the
+underlying build system tool.
+
+.. code-block:: cmake
+
+  build_command(<cachevariable> <makecommand>)
+
+This second signature is deprecated, but still available for backwards
+compatibility.  Use the first signature instead.
+
+It sets the given ``<cachevariable>`` to a command-line string as
+above but without the ``--target`` option.
+The ``<makecommand>`` is ignored but should be the full path to
+devenv, nmake, make or one of the end user build tools
+for legacy invocations.
+
+.. note::
+ In CMake versions prior to 3.0 this command returned a command
+ line that directly invokes the native build tool for the current
+ generator.  Their implementation of the ``PROJECT_NAME`` option
+ had no useful effects, so CMake now warns on use of the option.
diff --git a/share/cmake-3.6/Help/command/build_name.rst b/share/cmake-3.6/Help/command/build_name.rst
new file mode 100644
index 0000000..f717db1
--- /dev/null
+++ b/share/cmake-3.6/Help/command/build_name.rst
@@ -0,0 +1,15 @@
+build_name
+----------
+
+Disallowed.  See CMake Policy :policy:`CMP0036`.
+
+Use ``${CMAKE_SYSTEM}`` and ``${CMAKE_CXX_COMPILER}`` instead.
+
+::
+
+  build_name(variable)
+
+Sets the specified variable to a string representing the platform and
+compiler settings.  These values are now available through the
+:variable:`CMAKE_SYSTEM` and
+:variable:`CMAKE_CXX_COMPILER <CMAKE_<LANG>_COMPILER>` variables.
diff --git a/share/cmake-3.6/Help/command/cmake_host_system_information.rst b/share/cmake-3.6/Help/command/cmake_host_system_information.rst
new file mode 100644
index 0000000..9402d57
--- /dev/null
+++ b/share/cmake-3.6/Help/command/cmake_host_system_information.rst
@@ -0,0 +1,25 @@
+cmake_host_system_information
+-----------------------------
+
+Query host system specific information.
+
+::
+
+  cmake_host_system_information(RESULT <variable> QUERY <key> ...)
+
+Queries system information of the host system on which cmake runs.
+One or more ``<key>`` can be provided to select the information to be
+queried.  The list of queried values is stored in ``<variable>``.
+
+``<key>`` can be one of the following values:
+
+::
+
+  NUMBER_OF_LOGICAL_CORES   = Number of logical cores.
+  NUMBER_OF_PHYSICAL_CORES  = Number of physical cores.
+  HOSTNAME                  = Hostname.
+  FQDN                      = Fully qualified domain name.
+  TOTAL_VIRTUAL_MEMORY      = Total virtual memory in megabytes.
+  AVAILABLE_VIRTUAL_MEMORY  = Available virtual memory in megabytes.
+  TOTAL_PHYSICAL_MEMORY     = Total physical memory in megabytes.
+  AVAILABLE_PHYSICAL_MEMORY = Available physical memory in megabytes.
diff --git a/share/cmake-3.6/Help/command/cmake_minimum_required.rst b/share/cmake-3.6/Help/command/cmake_minimum_required.rst
new file mode 100644
index 0000000..9535bf3
--- /dev/null
+++ b/share/cmake-3.6/Help/command/cmake_minimum_required.rst
@@ -0,0 +1,50 @@
+cmake_minimum_required
+----------------------
+
+Set the minimum required version of cmake for a project and
+update `Policy Settings`_ to match the version given::
+
+  cmake_minimum_required(VERSION major.minor[.patch[.tweak]]
+                         [FATAL_ERROR])
+
+If the current version of CMake is lower than that required it will
+stop processing the project and report an error.
+
+The ``FATAL_ERROR`` option is accepted but ignored by CMake 2.6 and
+higher.  It should be specified so CMake versions 2.4 and lower fail
+with an error instead of just a warning.
+
+.. note::
+  Call the ``cmake_minimum_required()`` command at the beginning of
+  the top-level ``CMakeLists.txt`` file even before calling the
+  :command:`project` command.  It is important to establish version
+  and policy settings before invoking other commands whose behavior
+  they may affect.  See also policy :policy:`CMP0000`.
+
+  Calling ``cmake_minimum_required()`` inside a :command:`function`
+  limits some effects to the function scope when invoked.  Such calls
+  should not be made with the intention of having global effects.
+
+Policy Settings
+^^^^^^^^^^^^^^^
+
+The ``cmake_minimum_required(VERSION)`` command implicitly invokes the
+:command:`cmake_policy(VERSION)` command to specify that the current
+project code is written for the given version of CMake.
+All policies introduced in the specified version or earlier will be
+set to use NEW behavior.  All policies introduced after the specified
+version will be unset.  This effectively requests behavior preferred
+as of a given CMake version and tells newer CMake versions to warn
+about their new policies.
+
+When a version higher than 2.4 is specified the command implicitly
+invokes::
+
+  cmake_policy(VERSION major[.minor[.patch[.tweak]]])
+
+which sets the cmake policy version level to the version specified.
+When version 2.4 or lower is given the command implicitly invokes::
+
+  cmake_policy(VERSION 2.4)
+
+which enables compatibility features for CMake 2.4 and lower.
diff --git a/share/cmake-3.6/Help/command/cmake_parse_arguments.rst b/share/cmake-3.6/Help/command/cmake_parse_arguments.rst
new file mode 100644
index 0000000..6206611
--- /dev/null
+++ b/share/cmake-3.6/Help/command/cmake_parse_arguments.rst
@@ -0,0 +1,85 @@
+cmake_parse_arguments
+---------------------
+
+``cmake_parse_arguments`` is intended to be used in macros or functions for
+parsing the arguments given to that macro or function.  It processes the
+arguments and defines a set of variables which hold the values of the
+respective options.
+
+::
+
+  cmake_parse_arguments(<prefix> <options> <one_value_keywords>
+                        <multi_value_keywords> args...)
+
+
+The ``<options>`` argument contains all options for the respective macro,
+i.e.  keywords which can be used when calling the macro without any value
+following, like e.g.  the ``OPTIONAL`` keyword of the :command:`install`
+command.
+
+The ``<one_value_keywords>`` argument contains all keywords for this macro
+which are followed by one value, like e.g. ``DESTINATION`` keyword of the
+:command:`install` command.
+
+The ``<multi_value_keywords>`` argument contains all keywords for this
+macro which can be followed by more than one value, like e.g. the
+``TARGETS`` or ``FILES`` keywords of the :command:`install` command.
+
+.. note::
+
+   All keywords shall be unique. I.e. every keyword shall only be specified
+   once in either ``<options>``, ``<one_value_keywords>`` or
+   ``<multi_value_keywords>``. A warning will be emitted if uniqueness is
+   violated.
+
+When done, ``cmake_parse_arguments`` will have defined for each of the
+keywords listed in ``<options>``, ``<one_value_keywords>`` and
+``<multi_value_keywords>`` a variable composed of the given ``<prefix>``
+followed by ``"_"`` and the name of the respective keyword.  These
+variables will then hold the respective value from the argument list.
+For the ``<options>`` keywords this will be ``TRUE`` or ``FALSE``.
+
+All remaining arguments are collected in a variable
+``<prefix>_UNPARSED_ARGUMENTS``, this can be checked afterwards to see
+whether your macro was called with unrecognized parameters.
+
+As an example here a ``my_install()`` macro, which takes similar arguments
+as the real :command:`install` command:
+
+.. code-block:: cmake
+
+   function(MY_INSTALL)
+       set(options OPTIONAL FAST)
+       set(oneValueArgs DESTINATION RENAME)
+       set(multiValueArgs TARGETS CONFIGURATIONS)
+       cmake_parse_arguments(MY_INSTALL "${options}" "${oneValueArgs}"
+                             "${multiValueArgs}" ${ARGN} )
+
+       # ...
+
+Assume ``my_install()`` has been called like this:
+
+.. code-block:: cmake
+
+   my_install(TARGETS foo bar DESTINATION bin OPTIONAL blub)
+
+After the ``cmake_parse_arguments`` call the macro will have set the
+following variables::
+
+   MY_INSTALL_OPTIONAL = TRUE
+   MY_INSTALL_FAST = FALSE (was not used in call to my_install)
+   MY_INSTALL_DESTINATION = "bin"
+   MY_INSTALL_RENAME = "" (was not used)
+   MY_INSTALL_TARGETS = "foo;bar"
+   MY_INSTALL_CONFIGURATIONS = "" (was not used)
+   MY_INSTALL_UNPARSED_ARGUMENTS = "blub" (nothing expected after "OPTIONAL")
+
+You can then continue and process these variables.
+
+Keywords terminate lists of values, e.g.  if directly after a
+one_value_keyword another recognized keyword follows, this is
+interpreted as the beginning of the new option.  E.g.
+``my_install(TARGETS foo DESTINATION OPTIONAL)`` would result in
+``MY_INSTALL_DESTINATION`` set to ``"OPTIONAL"``, but as ``OPTIONAL``
+is a keyword itself ``MY_INSTALL_DESTINATION`` will be empty and
+``MY_INSTALL_OPTIONAL`` will therefore be set to ``TRUE``.
diff --git a/share/cmake-3.6/Help/command/cmake_policy.rst b/share/cmake-3.6/Help/command/cmake_policy.rst
new file mode 100644
index 0000000..b51b951
--- /dev/null
+++ b/share/cmake-3.6/Help/command/cmake_policy.rst
@@ -0,0 +1,96 @@
+cmake_policy
+------------
+
+Manage CMake Policy settings.  See the :manual:`cmake-policies(7)`
+manual for defined policies.
+
+As CMake evolves it is sometimes necessary to change existing behavior
+in order to fix bugs or improve implementations of existing features.
+The CMake Policy mechanism is designed to help keep existing projects
+building as new versions of CMake introduce changes in behavior.  Each
+new policy (behavioral change) is given an identifier of the form
+``CMP<NNNN>`` where ``<NNNN>`` is an integer index.  Documentation
+associated with each policy describes the ``OLD`` and ``NEW`` behavior
+and the reason the policy was introduced.  Projects may set each policy
+to select the desired behavior.  When CMake needs to know which behavior
+to use it checks for a setting specified by the project.  If no
+setting is available the ``OLD`` behavior is assumed and a warning is
+produced requesting that the policy be set.
+
+Setting Policies by CMake Version
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The ``cmake_policy`` command is used to set policies to ``OLD`` or ``NEW``
+behavior.  While setting policies individually is supported, we
+encourage projects to set policies based on CMake versions::
+
+  cmake_policy(VERSION major.minor[.patch[.tweak]])
+
+Specify that the current CMake code is written for the given
+version of CMake.  All policies introduced in the specified version or
+earlier will be set to use ``NEW`` behavior.  All policies introduced
+after the specified version will be unset (unless the
+:variable:`CMAKE_POLICY_DEFAULT_CMP<NNNN>` variable sets a default).
+This effectively requests behavior preferred as of a given CMake
+version and tells newer CMake versions to warn about their new policies.
+The policy version specified must be at least 2.4 or the command will
+report an error.
+
+Note that the :command:`cmake_minimum_required(VERSION)`
+command implicitly calls ``cmake_policy(VERSION)`` too.
+
+Setting Policies Explicitly
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  cmake_policy(SET CMP<NNNN> NEW)
+  cmake_policy(SET CMP<NNNN> OLD)
+
+Tell CMake to use the ``OLD`` or ``NEW`` behavior for a given policy.
+Projects depending on the old behavior of a given policy may silence a
+policy warning by setting the policy state to ``OLD``.  Alternatively
+one may fix the project to work with the new behavior and set the
+policy state to ``NEW``.
+
+.. include:: ../policy/DEPRECATED.txt
+
+Checking Policy Settings
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  cmake_policy(GET CMP<NNNN> <variable>)
+
+Check whether a given policy is set to ``OLD`` or ``NEW`` behavior.
+The output ``<variable>`` value will be ``OLD`` or ``NEW`` if the
+policy is set, and empty otherwise.
+
+CMake Policy Stack
+^^^^^^^^^^^^^^^^^^
+
+CMake keeps policy settings on a stack, so changes made by the
+cmake_policy command affect only the top of the stack.  A new entry on
+the policy stack is managed automatically for each subdirectory to
+protect its parents and siblings.  CMake also manages a new entry for
+scripts loaded by :command:`include` and :command:`find_package` commands
+except when invoked with the ``NO_POLICY_SCOPE`` option
+(see also policy :policy:`CMP0011`).
+The ``cmake_policy`` command provides an interface to manage custom
+entries on the policy stack::
+
+  cmake_policy(PUSH)
+  cmake_policy(POP)
+
+Each ``PUSH`` must have a matching ``POP`` to erase any changes.
+This is useful to make temporary changes to policy settings.
+Calls to the :command:`cmake_minimum_required(VERSION)`,
+``cmake_policy(VERSION)``, or ``cmake_policy(SET)`` commands
+influence only the current top of the policy stack.
+
+Commands created by the :command:`function` and :command:`macro`
+commands record policy settings when they are created and
+use the pre-record policies when they are invoked.  If the function or
+macro implementation sets policies, the changes automatically
+propagate up through callers until they reach the closest nested
+policy stack entry.
diff --git a/share/cmake-3.2/Help/command/configure_file.rst b/share/cmake-3.6/Help/command/configure_file.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/configure_file.rst
rename to share/cmake-3.6/Help/command/configure_file.rst
diff --git a/share/cmake-3.2/Help/command/continue.rst b/share/cmake-3.6/Help/command/continue.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/continue.rst
rename to share/cmake-3.6/Help/command/continue.rst
diff --git a/share/cmake-3.6/Help/command/create_test_sourcelist.rst b/share/cmake-3.6/Help/command/create_test_sourcelist.rst
new file mode 100644
index 0000000..dde6812
--- /dev/null
+++ b/share/cmake-3.6/Help/command/create_test_sourcelist.rst
@@ -0,0 +1,30 @@
+create_test_sourcelist
+----------------------
+
+Create a test driver and source list for building test programs.
+
+::
+
+  create_test_sourcelist(sourceListName driverName
+                         test1 test2 test3
+                         EXTRA_INCLUDE include.h
+                         FUNCTION function)
+
+A test driver is a program that links together many small tests into a
+single executable.  This is useful when building static executables
+with large libraries to shrink the total required size.  The list of
+source files needed to build the test driver will be in
+``sourceListName``.  ``driverName`` is the name of the test driver program.
+The rest of the arguments consist of a list of test source files, can
+be semicolon separated.  Each test source file should have a function
+in it that is the same name as the file with no extension (foo.cxx
+should have int foo(int, char*[]);) ``driverName`` will be able to call
+each of the tests by name on the command line.  If ``EXTRA_INCLUDE`` is
+specified, then the next argument is included into the generated file.
+If ``FUNCTION`` is specified, then the next argument is taken as a
+function name that is passed a pointer to ac and av.  This can be used
+to add extra command line processing to each test.  The
+``CMAKE_TESTDRIVER_BEFORE_TESTMAIN`` cmake variable can be set to
+have code that will be placed directly before calling the test main function.
+``CMAKE_TESTDRIVER_AFTER_TESTMAIN`` can be set to have code that
+will be placed directly after the call to the test main function.
diff --git a/share/cmake-3.6/Help/command/ctest_build.rst b/share/cmake-3.6/Help/command/ctest_build.rst
new file mode 100644
index 0000000..e1b7793
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_build.rst
@@ -0,0 +1,73 @@
+ctest_build
+-----------
+
+Perform the :ref:`CTest Build Step` as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_build([BUILD <build-dir>] [APPEND]
+              [CONFIGURATION <config>]
+              [FLAGS <flags>]
+              [PROJECT_NAME <project-name>]
+              [TARGET <target-name>]
+              [NUMBER_ERRORS <num-err-var>]
+              [NUMBER_WARNINGS <num-warn-var>]
+              [RETURN_VALUE <result-var>]
+              )
+
+Build the project and store results in ``Build.xml``
+for submission with the :command:`ctest_submit` command.
+
+The :variable:`CTEST_BUILD_COMMAND` variable may be set to explicitly
+specify the build command line.  Otherwise the build command line is
+computed automatically based on the options given.
+
+The options are:
+
+``BUILD <build-dir>``
+  Specify the top-level build directory.  If not given, the
+  :variable:`CTEST_BINARY_DIRECTORY` variable is used.
+
+``APPEND``
+  Mark results for append to those previously submitted to a
+  dashboard server since the last :command:`ctest_start` call.
+  Append semantics are defined by the dashboard server in use.
+
+``CONFIGURATION <config>``
+  Specify the build configuration (e.g. ``Debug``).  If not
+  specified the ``CTEST_BUILD_CONFIGURATION`` variable will be checked.
+  Otherwise the ``-C <cfg>`` option given to the :manual:`ctest(1)`
+  command will be used, if any.
+
+``FLAGS <flags>``
+  Pass additional arguments to the underlying build command.
+  If not specified the ``CTEST_BUILD_FLAGS`` variable will be checked.
+  This can, e.g., be used to trigger a parallel build using the
+  ``-j`` option of make. See the :module:`ProcessorCount` module
+  for an example.
+
+``PROJECT_NAME <project-name>``
+  Set the name of the project to build.  This should correspond
+  to the top-level call to the :command:`project` command.
+  If not specified the ``CTEST_PROJECT_NAME`` variable will be checked.
+
+``TARGET <target-name>``
+  Specify the name of a target to build.  If not specified the
+  ``CTEST_BUILD_TARGET`` variable will be checked.  Otherwise the
+  default target will be built.  This is the "all" target
+  (called ``ALL_BUILD`` in :ref:`Visual Studio Generators`).
+
+``NUMBER_ERRORS <num-err-var>``
+  Store the number of build errors detected in the given variable.
+
+``NUMBER_WARNINGS <num-warn-var>``
+  Store the number of build warnings detected in the given variable.
+
+``RETURN_VALUE <result-var>``
+  Store the return value of the native build tool in the given variable.
+
+``QUIET``
+  Suppress any CTest-specific non-error output that would have been
+  printed to the console otherwise.  The summary of warnings / errors,
+  as well as the output from the native build tool is unaffected by
+  this option.
diff --git a/share/cmake-3.6/Help/command/ctest_configure.rst b/share/cmake-3.6/Help/command/ctest_configure.rst
new file mode 100644
index 0000000..851c292
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_configure.rst
@@ -0,0 +1,39 @@
+ctest_configure
+---------------
+
+Perform the :ref:`CTest Configure Step` as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_configure([BUILD <build-dir>] [SOURCE <source-dir>] [APPEND]
+                  [OPTIONS <options>] [RETURN_VALUE <result-var>] [QUIET])
+
+Configure the project build tree and record results in ``Configure.xml``
+for submission with the :command:`ctest_submit` command.
+
+The options are:
+
+``BUILD <build-dir>``
+  Specify the top-level build directory.  If not given, the
+  :variable:`CTEST_BINARY_DIRECTORY` variable is used.
+
+``SOURCE <source-dir>``
+  Specify the source directory.  If not given, the
+  :variable:`CTEST_SOURCE_DIRECTORY` variable is used.
+
+``APPEND``
+  Mark results for append to those previously submitted to a
+  dashboard server since the last :command:`ctest_start` call.
+  Append semantics are defined by the dashboard server in use.
+
+``OPTIONS <options>``
+  Specify command-line arguments to pass to the configuration tool.
+
+``RETURN_VALUE <result-var>``
+  Store in the ``<result-var>`` variable the return value of the native
+  configuration tool.
+
+``QUIET``
+  Suppress any CTest-specific non-error messages that would have
+  otherwise been printed to the console.  Output from the underlying
+  configure command is not affected.
diff --git a/share/cmake-3.6/Help/command/ctest_coverage.rst b/share/cmake-3.6/Help/command/ctest_coverage.rst
new file mode 100644
index 0000000..12429b9
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_coverage.rst
@@ -0,0 +1,39 @@
+ctest_coverage
+--------------
+
+Perform the :ref:`CTest Coverage Step` as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_coverage([BUILD <build-dir>] [APPEND]
+                 [LABELS <label>...]
+                 [RETURN_VALUE <result-var>]
+                 [QUIET]
+                 )
+
+Collect coverage tool results and stores them in ``Coverage.xml``
+for submission with the :command:`ctest_submit` command.
+
+The options are:
+
+``BUILD <build-dir>``
+  Specify the top-level build directory.  If not given, the
+  :variable:`CTEST_BINARY_DIRECTORY` variable is used.
+
+``APPEND``
+  Mark results for append to those previously submitted to a
+  dashboard server since the last :command:`ctest_start` call.
+  Append semantics are defined by the dashboard server in use.
+
+``LABELS``
+  Filter the coverage report to include only source files labeled
+  with at least one of the labels specified.
+
+``RETURN_VALUE <result-var>``
+  Store in the ``<result-var>`` variable ``0`` if coverage tools
+  ran without error and non-zero otherwise.
+
+``QUIET``
+  Suppress any CTest-specific non-error output that would have been
+  printed to the console otherwise.  The summary indicating how many
+  lines of code were covered is unaffected by this option.
diff --git a/share/cmake-3.2/Help/command/ctest_empty_binary_directory.rst b/share/cmake-3.6/Help/command/ctest_empty_binary_directory.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/ctest_empty_binary_directory.rst
rename to share/cmake-3.6/Help/command/ctest_empty_binary_directory.rst
diff --git a/share/cmake-3.6/Help/command/ctest_memcheck.rst b/share/cmake-3.6/Help/command/ctest_memcheck.rst
new file mode 100644
index 0000000..29bdf7d
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_memcheck.rst
@@ -0,0 +1,29 @@
+ctest_memcheck
+--------------
+
+Perform the :ref:`CTest MemCheck Step` as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_memcheck([BUILD <build-dir>] [APPEND]
+                 [START <start-number>]
+                 [END <end-number>]
+                 [STRIDE <stride-number>]
+                 [EXCLUDE <exclude-regex>]
+                 [INCLUDE <include-regex>]
+                 [EXCLUDE_LABEL <label-exclude-regex>]
+                 [INCLUDE_LABEL <label-include-regex>]
+                 [PARALLEL_LEVEL <level>]
+                 [TEST_LOAD <threshold>]
+                 [SCHEDULE_RANDOM <ON|OFF>]
+                 [STOP_TIME <time-of-day>]
+                 [RETURN_VALUE <result-var>]
+                 [QUIET]
+                 )
+
+
+Run tests with a dynamic analysis tool and store results in
+``MemCheck.xml`` for submission with the :command:`ctest_submit`
+command.
+
+The options are the same as those for the :command:`ctest_test` command.
diff --git a/share/cmake-3.6/Help/command/ctest_read_custom_files.rst b/share/cmake-3.6/Help/command/ctest_read_custom_files.rst
new file mode 100644
index 0000000..cf8e17a
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_read_custom_files.rst
@@ -0,0 +1,14 @@
+ctest_read_custom_files
+-----------------------
+
+read CTestCustom files.
+
+::
+
+  ctest_read_custom_files( directory ... )
+
+Read all the CTestCustom.ctest or CTestCustom.cmake files from the
+given directory.
+
+By default, invoking :manual:`ctest(1)` without a script will read custom
+files from the binary directory.
diff --git a/share/cmake-3.6/Help/command/ctest_run_script.rst b/share/cmake-3.6/Help/command/ctest_run_script.rst
new file mode 100644
index 0000000..5ec543e
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_run_script.rst
@@ -0,0 +1,15 @@
+ctest_run_script
+----------------
+
+runs a ctest -S script
+
+::
+
+  ctest_run_script([NEW_PROCESS] script_file_name script_file_name1
+              script_file_name2 ... [RETURN_VALUE var])
+
+Runs a script or scripts much like if it was run from ctest -S.  If no
+argument is provided then the current script is run using the current
+settings of the variables.  If ``NEW_PROCESS`` is specified then each
+script will be run in a separate process.If ``RETURN_VALUE`` is specified
+the return value of the last script run will be put into ``var``.
diff --git a/share/cmake-3.2/Help/command/ctest_sleep.rst b/share/cmake-3.6/Help/command/ctest_sleep.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/ctest_sleep.rst
rename to share/cmake-3.6/Help/command/ctest_sleep.rst
diff --git a/share/cmake-3.6/Help/command/ctest_start.rst b/share/cmake-3.6/Help/command/ctest_start.rst
new file mode 100644
index 0000000..63db32f
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_start.rst
@@ -0,0 +1,25 @@
+ctest_start
+-----------
+
+Starts the testing for a given model
+
+::
+
+  ctest_start(Model [TRACK <track>] [APPEND] [source [binary]] [QUIET])
+
+Starts the testing for a given model.  The command should be called
+after the binary directory is initialized.  If the 'source' and
+'binary' directory are not specified, it reads the
+:variable:`CTEST_SOURCE_DIRECTORY` and :variable:`CTEST_BINARY_DIRECTORY`.
+If the track is
+specified, the submissions will go to the specified track.  If APPEND
+is used, the existing TAG is used rather than creating a new one based
+on the current time stamp.  If ``QUIET`` is used, CTest will suppress any
+non-error messages that it otherwise would have printed to the console.
+
+If the :variable:`CTEST_CHECKOUT_COMMAND` variable
+(or the :variable:`CTEST_CVS_CHECKOUT` variable)
+is set, its content is treated as command-line.  The command is
+invoked with the current working directory set to the parent of the source
+directory, even if the source directory already exists.  This can be used
+to create the source tree from a version control repository.
diff --git a/share/cmake-3.6/Help/command/ctest_submit.rst b/share/cmake-3.6/Help/command/ctest_submit.rst
new file mode 100644
index 0000000..6830b59
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_submit.rst
@@ -0,0 +1,65 @@
+ctest_submit
+------------
+
+Perform the :ref:`CTest Submit Step` as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_submit([PARTS <part>...] [FILES <file>...]
+               [RETRY_COUNT <count>]
+               [RETRY_DELAY <delay>]
+               [RETURN_VALUE <result-var>]
+               [QUIET]
+               )
+
+Submit results to a dashboard server.
+By default all available parts are submitted.
+
+The options are:
+
+``PARTS <part>...``
+  Specify a subset of parts to submit.  Valid part names are::
+
+    Start      = nothing
+    Update     = ctest_update results, in Update.xml
+    Configure  = ctest_configure results, in Configure.xml
+    Build      = ctest_build results, in Build.xml
+    Test       = ctest_test results, in Test.xml
+    Coverage   = ctest_coverage results, in Coverage.xml
+    MemCheck   = ctest_memcheck results, in DynamicAnalysis.xml
+    Notes      = Files listed by CTEST_NOTES_FILES, in Notes.xml
+    ExtraFiles = Files listed by CTEST_EXTRA_SUBMIT_FILES
+    Upload     = Files prepared for upload by ctest_upload(), in Upload.xml
+    Submit     = nothing
+
+``FILES <file>...``
+  Specify an explicit list of specific files to be submitted.
+  Each individual file must exist at the time of the call.
+
+``RETRY_COUNT <count>``
+  Specify how many times to retry a timed-out submission.
+
+``RETRY_DELAY <delay>``
+  Specify how long (in seconds) to wait after a timed-out submission
+  before attempting to re-submit.
+
+``RETURN_VALUE <result-var>``
+  Store in the ``<result-var>`` variable ``0`` for success and
+  non-zero on failure.
+
+``QUIET``
+  Suppress all non-error messages that would have otherwise been
+  printed to the console.
+
+Submit to CDash Upload API
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  ctest_submit(CDASH_UPLOAD <file> [CDASH_UPLOAD_TYPE <type>])
+
+This second signature is used to upload files to CDash via the CDash
+file upload API. The api first sends a request to upload to CDash along
+with a content hash of the file. If CDash does not already have the file,
+then it is uploaded. Along with the file, a CDash type string is specified
+to tell CDash which handler to use to process the data.
diff --git a/share/cmake-3.6/Help/command/ctest_test.rst b/share/cmake-3.6/Help/command/ctest_test.rst
new file mode 100644
index 0000000..412e323
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_test.rst
@@ -0,0 +1,90 @@
+ctest_test
+----------
+
+Perform the :ref:`CTest Test Step` as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_test([BUILD <build-dir>] [APPEND]
+             [START <start-number>]
+             [END <end-number>]
+             [STRIDE <stride-number>]
+             [EXCLUDE <exclude-regex>]
+             [INCLUDE <include-regex>]
+             [EXCLUDE_LABEL <label-exclude-regex>]
+             [INCLUDE_LABEL <label-include-regex>]
+             [PARALLEL_LEVEL <level>]
+             [TEST_LOAD <threshold>]
+             [SCHEDULE_RANDOM <ON|OFF>]
+             [STOP_TIME <time-of-day>]
+             [RETURN_VALUE <result-var>]
+             [QUIET]
+             )
+
+Run tests in the project build tree and store results in
+``Test.xml`` for submission with the :command:`ctest_submit` command.
+
+The options are:
+
+``BUILD <build-dir>``
+  Specify the top-level build directory.  If not given, the
+  :variable:`CTEST_BINARY_DIRECTORY` variable is used.
+
+``APPEND``
+  Mark results for append to those previously submitted to a
+  dashboard server since the last :command:`ctest_start` call.
+  Append semantics are defined by the dashboard server in use.
+
+``START <start-number>``
+  Specify the beginning of a range of test numbers.
+
+``END <end-number>``
+  Specify the end of a range of test numbers.
+
+``STRIDE <stride-number>``
+  Specify the stride by which to step across a range of test numbers.
+
+``EXCLUDE <exclude-regex>``
+  Specify a regular expression matching test names to exclude.
+
+``INCLUDE <include-regex>``
+  Specify a regular expression matching test names to include.
+  Tests not matching this expression are excluded.
+
+``EXCLUDE_LABEL <label-exclude-regex>``
+  Specify a regular expression matching test labels to exclude.
+
+``INCLUDE_LABEL <label-include-regex>``
+  Specify a regular expression matching test labels to include.
+  Tests not matching this expression are excluded.
+
+``PARALLEL_LEVEL <level>``
+  Specify a positive number representing the number of tests to
+  be run in parallel.
+
+``TEST_LOAD <threshold>``
+  While running tests in parallel, try not to start tests when they
+  may cause the CPU load to pass above a given threshold.  If not
+  specified the :variable:`CTEST_TEST_LOAD` variable will be checked,
+  and then the ``--test-load`` command-line argument to :manual:`ctest(1)`.
+  See also the ``TestLoad`` setting in the :ref:`CTest Test Step`.
+
+``SCHEDULE_RANDOM <ON|OFF>``
+  Launch tests in a random order.  This may be useful for detecting
+  implicit test dependencies.
+
+``STOP_TIME <time-of-day>``
+  Specify a time of day at which the tests should all stop running.
+
+``RETURN_VALUE <result-var>``
+  Store in the ``<result-var>`` variable ``0`` if all tests passed.
+  Store non-zero if anything went wrong.
+
+``QUIET``
+  Suppress any CTest-specific non-error messages that would have otherwise
+  been printed to the console.  Output from the underlying test command is not
+  affected.  Summary info detailing the percentage of passing tests is also
+  unaffected by the ``QUIET`` option.
+
+See also the :variable:`CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE`
+and :variable:`CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE` variables.
diff --git a/share/cmake-3.6/Help/command/ctest_update.rst b/share/cmake-3.6/Help/command/ctest_update.rst
new file mode 100644
index 0000000..b205bca
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_update.rst
@@ -0,0 +1,31 @@
+ctest_update
+------------
+
+Perform the :ref:`CTest Update Step` as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_update([SOURCE <source-dir>] [RETURN_VALUE <result-var>] [QUIET])
+
+Update the source tree from version control and record results in
+``Update.xml`` for submission with the :command:`ctest_submit` command.
+
+The options are:
+
+``SOURCE <source-dir>``
+  Specify the source directory.  If not given, the
+  :variable:`CTEST_SOURCE_DIRECTORY` variable is used.
+
+``RETURN_VALUE <result-var>``
+  Store in the ``<result-var>`` variable the number of files
+  updated or ``-1`` on error.
+
+``QUIET``
+  Tell CTest to suppress most non-error messages that it would
+  have otherwise printed to the console.  CTest will still report
+  the new revision of the repository and any conflicting files
+  that were found.
+
+The update always follows the version control branch currently checked
+out in the source directory.  See the :ref:`CTest Update Step`
+documentation for more information.
diff --git a/share/cmake-3.6/Help/command/ctest_upload.rst b/share/cmake-3.6/Help/command/ctest_upload.rst
new file mode 100644
index 0000000..d9630d2
--- /dev/null
+++ b/share/cmake-3.6/Help/command/ctest_upload.rst
@@ -0,0 +1,18 @@
+ctest_upload
+------------
+
+Upload files to a dashboard server as a :ref:`Dashboard Client`.
+
+::
+
+  ctest_upload(FILES <file>... [QUIET])
+
+The options are:
+
+``FILES <file>...``
+  Specify a list of files to be sent along with the build results to the
+  dashboard server.
+
+``QUIET``
+  Suppress any CTest-specific non-error output that would have been
+  printed to the console otherwise.
diff --git a/share/cmake-3.6/Help/command/define_property.rst b/share/cmake-3.6/Help/command/define_property.rst
new file mode 100644
index 0000000..873c6ca
--- /dev/null
+++ b/share/cmake-3.6/Help/command/define_property.rst
@@ -0,0 +1,45 @@
+define_property
+---------------
+
+Define and document custom properties.
+
+::
+
+  define_property(<GLOBAL | DIRECTORY | TARGET | SOURCE |
+                   TEST | VARIABLE | CACHED_VARIABLE>
+                   PROPERTY <name> [INHERITED]
+                   BRIEF_DOCS <brief-doc> [docs...]
+                   FULL_DOCS <full-doc> [docs...])
+
+Define one property in a scope for use with the :command:`set_property` and
+:command:`get_property` commands.  This is primarily useful to associate
+documentation with property names that may be retrieved with the
+:command:`get_property` command. The first argument determines the kind of
+scope in which the property should be used.  It must be one of the
+following:
+
+::
+
+  GLOBAL    = associated with the global namespace
+  DIRECTORY = associated with one directory
+  TARGET    = associated with one target
+  SOURCE    = associated with one source file
+  TEST      = associated with a test named with add_test
+  VARIABLE  = documents a CMake language variable
+  CACHED_VARIABLE = documents a CMake cache variable
+
+Note that unlike :command:`set_property` and :command:`get_property` no
+actual scope needs to be given; only the kind of scope is important.
+
+The required ``PROPERTY`` option is immediately followed by the name of
+the property being defined.
+
+If the ``INHERITED`` option then the :command:`get_property` command will
+chain up to the next higher scope when the requested property is not set
+in the scope given to the command. ``DIRECTORY`` scope chains to
+``GLOBAL``. ``TARGET``, ``SOURCE``, and ``TEST`` chain to ``DIRECTORY``.
+
+The ``BRIEF_DOCS`` and ``FULL_DOCS`` options are followed by strings to be
+associated with the property as its brief and full documentation.
+Corresponding options to the :command:`get_property` command will retrieve
+the documentation.
diff --git a/share/cmake-3.6/Help/command/else.rst b/share/cmake-3.6/Help/command/else.rst
new file mode 100644
index 0000000..0e5a198
--- /dev/null
+++ b/share/cmake-3.6/Help/command/else.rst
@@ -0,0 +1,10 @@
+else
+----
+
+Starts the else portion of an if block.
+
+::
+
+  else(expression)
+
+See the :command:`if` command.
diff --git a/share/cmake-3.6/Help/command/elseif.rst b/share/cmake-3.6/Help/command/elseif.rst
new file mode 100644
index 0000000..9a8dfed
--- /dev/null
+++ b/share/cmake-3.6/Help/command/elseif.rst
@@ -0,0 +1,10 @@
+elseif
+------
+
+Starts the elseif portion of an if block.
+
+::
+
+  elseif(expression)
+
+See the :command:`if` command.
diff --git a/share/cmake-3.6/Help/command/enable_language.rst b/share/cmake-3.6/Help/command/enable_language.rst
new file mode 100644
index 0000000..4445561
--- /dev/null
+++ b/share/cmake-3.6/Help/command/enable_language.rst
@@ -0,0 +1,22 @@
+enable_language
+---------------
+
+Enable a language (CXX/C/Fortran/etc)
+
+::
+
+  enable_language(<lang> [OPTIONAL] )
+
+This command enables support for the named language in CMake.  This is
+the same as the project command but does not create any of the extra
+variables that are created by the project command.  Example languages
+are CXX, C, Fortran.
+
+This command must be called in file scope, not in a function call.
+Furthermore, it must be called in the highest directory common to all
+targets using the named language directly for compiling sources or
+indirectly through link dependencies.  It is simplest to enable all
+needed languages in the top-level directory of a project.
+
+The ``OPTIONAL`` keyword is a placeholder for future implementation and
+does not currently work.
diff --git a/share/cmake-3.6/Help/command/enable_testing.rst b/share/cmake-3.6/Help/command/enable_testing.rst
new file mode 100644
index 0000000..1e3e279
--- /dev/null
+++ b/share/cmake-3.6/Help/command/enable_testing.rst
@@ -0,0 +1,13 @@
+enable_testing
+--------------
+
+Enable testing for current directory and below.
+
+::
+
+  enable_testing()
+
+Enables testing for this directory and below.  See also the
+:command:`add_test` command.  Note that ctest expects to find a test file
+in the build directory root.  Therefore, this command should be in the
+source directory root.
diff --git a/share/cmake-3.6/Help/command/endforeach.rst b/share/cmake-3.6/Help/command/endforeach.rst
new file mode 100644
index 0000000..9af972b
--- /dev/null
+++ b/share/cmake-3.6/Help/command/endforeach.rst
@@ -0,0 +1,10 @@
+endforeach
+----------
+
+Ends a list of commands in a foreach block.
+
+::
+
+  endforeach(expression)
+
+See the :command:`foreach` command.
diff --git a/share/cmake-3.6/Help/command/endfunction.rst b/share/cmake-3.6/Help/command/endfunction.rst
new file mode 100644
index 0000000..6cc196c
--- /dev/null
+++ b/share/cmake-3.6/Help/command/endfunction.rst
@@ -0,0 +1,10 @@
+endfunction
+-----------
+
+Ends a list of commands in a function block.
+
+::
+
+  endfunction(expression)
+
+See the :command:`function` command.
diff --git a/share/cmake-3.6/Help/command/endif.rst b/share/cmake-3.6/Help/command/endif.rst
new file mode 100644
index 0000000..a0163bf
--- /dev/null
+++ b/share/cmake-3.6/Help/command/endif.rst
@@ -0,0 +1,10 @@
+endif
+-----
+
+Ends a list of commands in an if block.
+
+::
+
+  endif(expression)
+
+See the :command:`if` command.
diff --git a/share/cmake-3.6/Help/command/endmacro.rst b/share/cmake-3.6/Help/command/endmacro.rst
new file mode 100644
index 0000000..47327a7
--- /dev/null
+++ b/share/cmake-3.6/Help/command/endmacro.rst
@@ -0,0 +1,10 @@
+endmacro
+--------
+
+Ends a list of commands in a macro block.
+
+::
+
+  endmacro(expression)
+
+See the :command:`macro` command.
diff --git a/share/cmake-3.6/Help/command/endwhile.rst b/share/cmake-3.6/Help/command/endwhile.rst
new file mode 100644
index 0000000..798c20e
--- /dev/null
+++ b/share/cmake-3.6/Help/command/endwhile.rst
@@ -0,0 +1,10 @@
+endwhile
+--------
+
+Ends a list of commands in a while block.
+
+::
+
+  endwhile(expression)
+
+See the :command:`while` command.
diff --git a/share/cmake-3.6/Help/command/exec_program.rst b/share/cmake-3.6/Help/command/exec_program.rst
new file mode 100644
index 0000000..6dfdad3
--- /dev/null
+++ b/share/cmake-3.6/Help/command/exec_program.rst
@@ -0,0 +1,24 @@
+exec_program
+------------
+
+Deprecated.  Use the :command:`execute_process` command instead.
+
+Run an executable program during the processing of the CMakeList.txt
+file.
+
+::
+
+  exec_program(Executable [directory in which to run]
+               [ARGS <arguments to executable>]
+               [OUTPUT_VARIABLE <var>]
+               [RETURN_VALUE <var>])
+
+The executable is run in the optionally specified directory.  The
+executable can include arguments if it is double quoted, but it is
+better to use the optional ``ARGS`` argument to specify arguments to the
+program.  This is because cmake will then be able to escape spaces in
+the executable path.  An optional argument ``OUTPUT_VARIABLE`` specifies a
+variable in which to store the output.  To capture the return value of
+the execution, provide a ``RETURN_VALUE``.  If ``OUTPUT_VARIABLE`` is
+specified, then no output will go to the stdout/stderr of the console
+running cmake.
diff --git a/share/cmake-3.6/Help/command/execute_process.rst b/share/cmake-3.6/Help/command/execute_process.rst
new file mode 100644
index 0000000..ca44b53
--- /dev/null
+++ b/share/cmake-3.6/Help/command/execute_process.rst
@@ -0,0 +1,76 @@
+execute_process
+---------------
+
+Execute one or more child processes.
+
+.. code-block:: cmake
+
+  execute_process(COMMAND <cmd1> [args1...]]
+                  [COMMAND <cmd2> [args2...] [...]]
+                  [WORKING_DIRECTORY <directory>]
+                  [TIMEOUT <seconds>]
+                  [RESULT_VARIABLE <variable>]
+                  [OUTPUT_VARIABLE <variable>]
+                  [ERROR_VARIABLE <variable>]
+                  [INPUT_FILE <file>]
+                  [OUTPUT_FILE <file>]
+                  [ERROR_FILE <file>]
+                  [OUTPUT_QUIET]
+                  [ERROR_QUIET]
+                  [OUTPUT_STRIP_TRAILING_WHITESPACE]
+                  [ERROR_STRIP_TRAILING_WHITESPACE])
+
+Runs the given sequence of one or more commands with the standard
+output of each process piped to the standard input of the next.
+A single standard error pipe is used for all processes.
+
+Options:
+
+``COMMAND``
+ A child process command line.
+
+ CMake executes the child process using operating system APIs directly.
+ All arguments are passed VERBATIM to the child process.
+ No intermediate shell is used, so shell operators such as ``>``
+ are treated as normal arguments.
+ (Use the ``INPUT_*``, ``OUTPUT_*``, and ``ERROR_*`` options to
+ redirect stdin, stdout, and stderr.)
+
+``WORKING_DIRECTORY``
+ The named directory will be set as the current working directory of
+ the child processes.
+
+``TIMEOUT``
+ The child processes will be terminated if they do not finish in the
+ specified number of seconds (fractions are allowed).
+
+``RESULT_VARIABLE``
+ The variable will be set to contain the result of running the processes.
+ This will be an integer return code from the last child or a string
+ describing an error condition.
+
+``OUTPUT_VARIABLE``, ``ERROR_VARIABLE``
+ The variable named will be set with the contents of the standard output
+ and standard error pipes, respectively.  If the same variable is named
+ for both pipes their output will be merged in the order produced.
+
+``INPUT_FILE, OUTPUT_FILE``, ``ERROR_FILE``
+ The file named will be attached to the standard input of the first
+ process, standard output of the last process, or standard error of
+ all processes, respectively.  If the same file is named for both
+ output and error then it will be used for both.
+
+``OUTPUT_QUIET``, ``ERROR_QUIET``
+ The standard output or standard error results will be quietly ignored.
+
+If more than one ``OUTPUT_*`` or ``ERROR_*`` option is given for the
+same pipe the precedence is not specified.
+If no ``OUTPUT_*`` or ``ERROR_*`` options are given the output will
+be shared with the corresponding pipes of the CMake process itself.
+
+The :command:`execute_process` command is a newer more powerful version of
+:command:`exec_program`, but the old command has been kept for compatibility.
+Both commands run while CMake is processing the project prior to build
+system generation.  Use :command:`add_custom_target` and
+:command:`add_custom_command` to create custom commands that run at
+build time.
diff --git a/share/cmake-3.6/Help/command/export.rst b/share/cmake-3.6/Help/command/export.rst
new file mode 100644
index 0000000..4419dc1
--- /dev/null
+++ b/share/cmake-3.6/Help/command/export.rst
@@ -0,0 +1,57 @@
+export
+------
+
+Export targets from the build tree for use by outside projects.
+
+::
+
+  export(EXPORT <export-name> [NAMESPACE <namespace>] [FILE <filename>])
+
+Create a file ``<filename>`` that may be included by outside projects to
+import targets from the current project's build tree.  This is useful
+during cross-compiling to build utility executables that can run on
+the host platform in one project and then import them into another
+project being compiled for the target platform.  If the ``NAMESPACE``
+option is given the ``<namespace>`` string will be prepended to all target
+names written to the file.
+
+Target installations are associated with the export ``<export-name>``
+using the ``EXPORT`` option of the :command:`install(TARGETS)` command.
+
+The file created by this command is specific to the build tree and
+should never be installed.  See the :command:`install(EXPORT)` command to
+export targets from an installation tree.
+
+The properties set on the generated IMPORTED targets will have the
+same values as the final values of the input TARGETS.
+
+::
+
+  export(TARGETS [target1 [target2 [...]]] [NAMESPACE <namespace>]
+         [APPEND] FILE <filename> [EXPORT_LINK_INTERFACE_LIBRARIES])
+
+This signature is similar to the ``EXPORT`` signature, but targets are listed
+explicitly rather than specified as an export-name.  If the APPEND option is
+given the generated code will be appended to the file instead of overwriting it.
+The EXPORT_LINK_INTERFACE_LIBRARIES keyword, if present, causes the
+contents of the properties matching
+``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?`` to be exported, when
+policy CMP0022 is NEW.  If a library target is included in the export
+but a target to which it links is not included the behavior is
+unspecified.
+
+::
+
+  export(PACKAGE <name>)
+
+Store the current build directory in the CMake user package registry
+for package ``<name>``.  The find_package command may consider the
+directory while searching for package ``<name>``.  This helps dependent
+projects find and use a package from the current project's build tree
+without help from the user.  Note that the entry in the package
+registry that this command creates works only in conjunction with a
+package configuration file (``<name>Config.cmake``) that works with the
+build tree. In some cases, for example for packaging and for system
+wide installations, it is not desirable to write the user package
+registry. If the :variable:`CMAKE_EXPORT_NO_PACKAGE_REGISTRY` variable
+is enabled, the ``export(PACKAGE)`` command will do nothing.
diff --git a/share/cmake-3.6/Help/command/export_library_dependencies.rst b/share/cmake-3.6/Help/command/export_library_dependencies.rst
new file mode 100644
index 0000000..2cb437e
--- /dev/null
+++ b/share/cmake-3.6/Help/command/export_library_dependencies.rst
@@ -0,0 +1,28 @@
+export_library_dependencies
+---------------------------
+
+Disallowed.  See CMake Policy :policy:`CMP0033`.
+
+Use :command:`install(EXPORT)` or :command:`export` command.
+
+This command generates an old-style library dependencies file.
+Projects requiring CMake 2.6 or later should not use the command.  Use
+instead the :command:`install(EXPORT)` command to help export targets from an
+installation tree and the :command:`export` command to export targets from a
+build tree.
+
+The old-style library dependencies file does not take into account
+per-configuration names of libraries or the
+:prop_tgt:`LINK_INTERFACE_LIBRARIES` target property.
+
+::
+
+  export_library_dependencies(<file> [APPEND])
+
+Create a file named ``<file>`` that can be included into a CMake listfile
+with the INCLUDE command.  The file will contain a number of SET
+commands that will set all the variables needed for library dependency
+information.  This should be the last command in the top level
+CMakeLists.txt file of the project.  If the ``APPEND`` option is
+specified, the SET commands will be appended to the given file instead
+of replacing it.
diff --git a/share/cmake-3.6/Help/command/file.rst b/share/cmake-3.6/Help/command/file.rst
new file mode 100644
index 0000000..256d16d
--- /dev/null
+++ b/share/cmake-3.6/Help/command/file.rst
@@ -0,0 +1,359 @@
+file
+----
+
+File manipulation command.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(WRITE <filename> <content>...)
+  file(APPEND <filename> <content>...)
+
+Write ``<content>`` into a file called ``<filename>``.  If the file does
+not exist, it will be created.  If the file already exists, ``WRITE``
+mode will overwrite it and ``APPEND`` mode will append to the end.
+(If the file is a build input, use the :command:`configure_file` command
+to update the file only when its content changes.)
+
+------------------------------------------------------------------------------
+
+::
+
+  file(READ <filename> <variable>
+       [OFFSET <offset>] [LIMIT <max-in>] [HEX])
+
+Read content from a file called ``<filename>`` and store it in a
+``<variable>``.  Optionally start from the given ``<offset>`` and
+read at most ``<max-in>`` bytes.  The ``HEX`` option causes data to
+be converted to a hexadecimal representation (useful for binary data).
+
+------------------------------------------------------------------------------
+
+::
+
+  file(STRINGS <filename> <variable> [<options>...])
+
+Parse a list of ASCII strings from ``<filename>`` and store it in
+``<variable>``.  Binary data in the file are ignored.  Carriage return
+(``\r``, CR) characters are ignored.  The options are:
+
+``LENGTH_MAXIMUM <max-len>``
+ Consider only strings of at most a given length.
+
+``LENGTH_MINIMUM <min-len>``
+ Consider only strings of at least a given length.
+
+``LIMIT_COUNT <max-num>``
+ Limit the number of distinct strings to be extracted.
+
+``LIMIT_INPUT <max-in>``
+ Limit the number of input bytes to read from the file.
+
+``LIMIT_OUTPUT <max-out>``
+ Limit the number of total bytes to store in the ``<variable>``.
+
+``NEWLINE_CONSUME``
+ Treat newline characters (``\n``, LF) as part of string content
+ instead of terminating at them.
+
+``NO_HEX_CONVERSION``
+ Intel Hex and Motorola S-record files are automatically converted to
+ binary while reading unless this option is given.
+
+``REGEX <regex>``
+ Consider only strings that match the given regular expression.
+
+``ENCODING <encoding-type>``
+ Consider strings of a given encoding.  Currently supported encodings are:
+ UTF-8, UTF-16LE, UTF-16BE, UTF-32LE, UTF-32BE.  If the ENCODING option
+ is not provided and the file has a Byte Order Mark, the ENCODING option
+ will be defaulted to respect the Byte Order Mark.
+
+For example, the code
+
+.. code-block:: cmake
+
+  file(STRINGS myfile.txt myfile)
+
+stores a list in the variable ``myfile`` in which each item is a line
+from the input file.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512> <filename> <variable>)
+
+Compute a cryptographic hash of the content of ``<filename>`` and
+store it in a ``<variable>``.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(GLOB <variable>
+       [LIST_DIRECTORIES true|false] [RELATIVE <path>]
+       [<globbing-expressions>...])
+  file(GLOB_RECURSE <variable> [FOLLOW_SYMLINKS]
+       [LIST_DIRECTORIES true|false] [RELATIVE <path>]
+       [<globbing-expressions>...])
+
+Generate a list of files that match the ``<globbing-expressions>`` and
+store it into the ``<variable>``.  Globbing expressions are similar to
+regular expressions, but much simpler.  If ``RELATIVE`` flag is
+specified, the results will be returned as relative paths to the given
+path.  No specific order of results is defined other than that it is
+deterministic.  If order is important then sort the list explicitly
+(e.g. using the :command:`list(SORT)` command).
+
+By default ``GLOB`` lists directories - directories are omited in result if
+``LIST_DIRECTORIES`` is set to false.
+
+.. note::
+  We do not recommend using GLOB to collect a list of source files from
+  your source tree.  If no CMakeLists.txt file changes when a source is
+  added or removed then the generated build system cannot know when to
+  ask CMake to regenerate.
+
+Examples of globbing expressions include::
+
+  *.cxx      - match all files with extension cxx
+  *.vt?      - match all files with extension vta,...,vtz
+  f[3-5].txt - match files f3.txt, f4.txt, f5.txt
+
+The ``GLOB_RECURSE`` mode will traverse all the subdirectories of the
+matched directory and match the files.  Subdirectories that are symlinks
+are only traversed if ``FOLLOW_SYMLINKS`` is given or policy
+:policy:`CMP0009` is not set to ``NEW``.
+
+By default ``GLOB_RECURSE`` omits directories from result list - setting
+``LIST_DIRECTORIES`` to true adds directories to result list.
+If ``FOLLOW_SYMLINKS`` is given or policy :policy:`CMP0009` is not set to
+``OLD`` then ``LIST_DIRECTORIES`` treats symlinks as directories.
+
+Examples of recursive globbing include::
+
+  /dir/*.py  - match all python files in /dir and subdirectories
+
+------------------------------------------------------------------------------
+
+::
+
+  file(RENAME <oldname> <newname>)
+
+Move a file or directory within a filesystem from ``<oldname>`` to
+``<newname>``, replacing the destination atomically.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(REMOVE [<files>...])
+  file(REMOVE_RECURSE [<files>...])
+
+Remove the given files.  The ``REMOVE_RECURSE`` mode will remove the given
+files and directories, also non-empty directories
+
+------------------------------------------------------------------------------
+
+::
+
+  file(MAKE_DIRECTORY [<directories>...])
+
+Create the given directories and their parents as needed.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(RELATIVE_PATH <variable> <directory> <file>)
+
+Compute the relative path from a ``<directory>`` to a ``<file>`` and
+store it in the ``<variable>``.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(TO_CMAKE_PATH "<path>" <variable>)
+  file(TO_NATIVE_PATH "<path>" <variable>)
+
+The ``TO_CMAKE_PATH`` mode converts a native ``<path>`` into a cmake-style
+path with forward-slashes (``/``).  The input can be a single path or a
+system search path like ``$ENV{PATH}``.  A search path will be converted
+to a cmake-style list separated by ``;`` characters.
+
+The ``TO_NATIVE_PATH`` mode converts a cmake-style ``<path>`` into a native
+path with platform-specific slashes (``\`` on Windows and ``/`` elsewhere).
+
+Always use double quotes around the ``<path>`` to be sure it is treated
+as a single argument to this command.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(DOWNLOAD <url> <file> [<options>...])
+  file(UPLOAD   <file> <url> [<options>...])
+
+The ``DOWNLOAD`` mode downloads the given ``<url>`` to a local ``<file>``.
+The ``UPLOAD`` mode uploads a local ``<file>`` to a given ``<url>``.
+
+Options to both ``DOWNLOAD`` and ``UPLOAD`` are:
+
+``INACTIVITY_TIMEOUT <seconds>``
+  Terminate the operation after a period of inactivity.
+
+``LOG <variable>``
+  Store a human-readable log of the operation in a variable.
+
+``SHOW_PROGRESS``
+  Print progress information as status messages until the operation is
+  complete.
+
+``STATUS <variable>``
+  Store the resulting status of the operation in a variable.
+  The status is a ``;`` separated list of length 2.
+  The first element is the numeric return value for the operation,
+  and the second element is a string value for the error.
+  A ``0`` numeric error means no error in the operation.
+
+``TIMEOUT <seconds>``
+  Terminate the operation after a given total time has elapsed.
+
+Additional options to ``DOWNLOAD`` are:
+
+``EXPECTED_HASH ALGO=<value>``
+
+  Verify that the downloaded content hash matches the expected value, where
+  ``ALGO`` is one of ``MD5``, ``SHA1``, ``SHA224``, ``SHA256``, ``SHA384``, or
+  ``SHA512``.  If it does not match, the operation fails with an error.
+
+``EXPECTED_MD5 <value>``
+  Historical short-hand for ``EXPECTED_HASH MD5=<value>``.
+
+``TLS_VERIFY <ON|OFF>``
+  Specify whether to verify the server certificate for ``https://`` URLs.
+  The default is to *not* verify.
+
+``TLS_CAINFO <file>``
+  Specify a custom Certificate Authority file for ``https://`` URLs.
+
+For ``https://`` URLs CMake must be built with OpenSSL support.  ``TLS/SSL``
+certificates are not checked by default.  Set ``TLS_VERIFY`` to ``ON`` to
+check certificates and/or use ``EXPECTED_HASH`` to verify downloaded content.
+If neither ``TLS`` option is given CMake will check variables
+``CMAKE_TLS_VERIFY`` and ``CMAKE_TLS_CAINFO``, respectively.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(TIMESTAMP <filename> <variable> [<format>] [UTC])
+
+Compute a string representation of the modification time of ``<filename>``
+and store it in ``<variable>``.  Should the command be unable to obtain a
+timestamp variable will be set to the empty string ("").
+
+See the :command:`string(TIMESTAMP)` command for documentation of
+the ``<format>`` and ``UTC`` options.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(GENERATE OUTPUT output-file
+       <INPUT input-file|CONTENT content>
+       [CONDITION expression])
+
+Generate an output file for each build configuration supported by the current
+:manual:`CMake Generator <cmake-generators(7)>`.  Evaluate
+:manual:`generator expressions <cmake-generator-expressions(7)>`
+from the input content to produce the output content.  The options are:
+
+``CONDITION <condition>``
+  Generate the output file for a particular configuration only if
+  the condition is true.  The condition must be either ``0`` or ``1``
+  after evaluating generator expressions.
+
+``CONTENT <content>``
+  Use the content given explicitly as input.
+
+``INPUT <input-file>``
+  Use the content from a given file as input.
+
+``OUTPUT <output-file>``
+  Specify the output file name to generate.  Use generator expressions
+  such as ``$<CONFIG>`` to specify a configuration-specific output file
+  name.  Multiple configurations may generate the same output file only
+  if the generated content is identical.  Otherwise, the ``<output-file>``
+  must evaluate to an unique name for each configuration.
+
+Exactly one ``CONTENT`` or ``INPUT`` option must be given.  A specific
+``OUTPUT`` file may be named by at most one invocation of ``file(GENERATE)``.
+Generated files are modified on subsequent cmake runs only if their content
+is changed.
+
+------------------------------------------------------------------------------
+
+::
+
+  file(<COPY|INSTALL> <files>... DESTINATION <dir>
+       [FILE_PERMISSIONS <permissions>...]
+       [DIRECTORY_PERMISSIONS <permissions>...]
+       [NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS]
+       [FILES_MATCHING]
+       [[PATTERN <pattern> | REGEX <regex>]
+        [EXCLUDE] [PERMISSIONS <permissions>...]] [...])
+
+The ``COPY`` signature copies files, directories, and symlinks to a
+destination folder.  Relative input paths are evaluated with respect
+to the current source directory, and a relative destination is
+evaluated with respect to the current build directory.  Copying
+preserves input file timestamps, and optimizes out a file if it exists
+at the destination with the same timestamp.  Copying preserves input
+permissions unless explicit permissions or ``NO_SOURCE_PERMISSIONS``
+are given (default is ``USE_SOURCE_PERMISSIONS``).
+
+See the :command:`install(DIRECTORY)` command for documentation of
+permissions, ``FILES_MATCHING``, ``PATTERN``, ``REGEX``, and
+``EXCLUDE`` options.  Copying directories preserves the structure
+of their content even if options are used to select a subset of
+files.
+
+The ``INSTALL`` signature differs slightly from ``COPY``: it prints
+status messages (subject to the :variable:`CMAKE_INSTALL_MESSAGE` variable),
+and ``NO_SOURCE_PERMISSIONS`` is default.
+Installation scripts generated by the :command:`install` command
+use this signature (with some undocumented options for internal use).
+
+------------------------------------------------------------------------------
+
+::
+
+  file(LOCK <path> [DIRECTORY] [RELEASE]
+       [GUARD <FUNCTION|FILE|PROCESS>]
+       [RESULT_VARIABLE <variable>]
+       [TIMEOUT <seconds>])
+
+Lock a file specified by ``<path>`` if no ``DIRECTORY`` option present and file
+``<path>/cmake.lock`` otherwise. File will be locked for scope defined by
+``GUARD`` option (default value is ``PROCESS``). ``RELEASE`` option can be used
+to unlock file explicitly. If option ``TIMEOUT`` is not specified CMake will
+wait until lock succeed or until fatal error occurs. If ``TIMEOUT`` is set to
+``0`` lock will be tried once and result will be reported immediately. If
+``TIMEOUT`` is not ``0`` CMake will try to lock file for the period specified
+by ``<seconds>`` value. Any errors will be interpreted as fatal if there is no
+``RESULT_VARIABLE`` option. Otherwise result will be stored in ``<variable>``
+and will be ``0`` on success or error message on failure.
+
+Note that lock is advisory - there is no guarantee that other processes will
+respect this lock, i.e. lock synchronize two or more CMake instances sharing
+some modifiable resources. Similar logic applied to ``DIRECTORY`` option -
+locking parent directory doesn't prevent other ``LOCK`` commands to lock any
+child directory or file.
+
+Trying to lock file twice is not allowed.  Any intermediate directories and
+file itself will be created if they not exist.  ``GUARD`` and ``TIMEOUT``
+options ignored on ``RELEASE`` operation.
diff --git a/share/cmake-3.6/Help/command/find_file.rst b/share/cmake-3.6/Help/command/find_file.rst
new file mode 100644
index 0000000..e56097b
--- /dev/null
+++ b/share/cmake-3.6/Help/command/find_file.rst
@@ -0,0 +1,34 @@
+find_file
+---------
+
+.. |FIND_XXX| replace:: find_file
+.. |NAMES| replace:: NAMES name1 [name2 ...]
+.. |SEARCH_XXX| replace:: full path to a file
+.. |SEARCH_XXX_DESC| replace:: full path to named file
+.. |prefix_XXX_SUBDIR| replace:: ``<prefix>/include``
+.. |entry_XXX_SUBDIR| replace:: ``<entry>/include``
+
+.. |CMAKE_PREFIX_PATH_XXX| replace::
+   ``<prefix>/include/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE`
+   is set, and |CMAKE_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_XXX_PATH| replace:: :variable:`CMAKE_INCLUDE_PATH`
+.. |CMAKE_XXX_MAC_PATH| replace:: :variable:`CMAKE_FRAMEWORK_PATH`
+
+.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: Directories in ``INCLUDE``.
+   On Windows hosts:
+   ``<prefix>/include/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE`
+   is set, and |SYSTEM_ENVIRONMENT_PREFIX_PATH_XXX_SUBDIR|, and the
+   directories in ``PATH`` itself.
+
+.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
+   ``<prefix>/include/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE`
+   is set, and |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_SYSTEM_XXX_PATH| replace::
+   :variable:`CMAKE_SYSTEM_INCLUDE_PATH`
+.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace::
+   :variable:`CMAKE_SYSTEM_FRAMEWORK_PATH`
+
+.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
+   :variable:`CMAKE_FIND_ROOT_PATH_MODE_INCLUDE`
+
+.. include:: FIND_XXX.txt
diff --git a/share/cmake-3.6/Help/command/find_library.rst b/share/cmake-3.6/Help/command/find_library.rst
new file mode 100644
index 0000000..31e6ec0
--- /dev/null
+++ b/share/cmake-3.6/Help/command/find_library.rst
@@ -0,0 +1,57 @@
+find_library
+------------
+
+.. |FIND_XXX| replace:: find_library
+.. |NAMES| replace:: NAMES name1 [name2 ...] [NAMES_PER_DIR]
+.. |SEARCH_XXX| replace:: library
+.. |SEARCH_XXX_DESC| replace:: library
+.. |prefix_XXX_SUBDIR| replace:: ``<prefix>/lib``
+.. |entry_XXX_SUBDIR| replace:: ``<entry>/lib``
+
+.. |CMAKE_PREFIX_PATH_XXX| replace::
+   ``<prefix>/lib/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE` is set,
+   and |CMAKE_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_XXX_PATH| replace:: :variable:`CMAKE_LIBRARY_PATH`
+.. |CMAKE_XXX_MAC_PATH| replace:: :variable:`CMAKE_FRAMEWORK_PATH`
+
+.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: Directories in ``LIB``.
+   On Windows hosts:
+   ``<prefix>/lib/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE` is set,
+   and |SYSTEM_ENVIRONMENT_PREFIX_PATH_XXX_SUBDIR|,
+   and the directories in ``PATH`` itself.
+
+.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
+   ``<prefix>/lib/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE` is set,
+   and |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_SYSTEM_XXX_PATH| replace::
+   :variable:`CMAKE_SYSTEM_LIBRARY_PATH`
+.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace::
+   :variable:`CMAKE_SYSTEM_FRAMEWORK_PATH`
+
+.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
+   :variable:`CMAKE_FIND_ROOT_PATH_MODE_LIBRARY`
+
+.. include:: FIND_XXX.txt
+
+When more than one value is given to the ``NAMES`` option this command by
+default will consider one name at a time and search every directory
+for it.  The ``NAMES_PER_DIR`` option tells this command to consider one
+directory at a time and search for all names in it.
+
+Each library name given to the ``NAMES`` option is first considered
+as a library file name and then considered with platform-specific
+prefixes (e.g. ``lib``) and suffixes (e.g. ``.so``).  Therefore one
+may specify library file names such as ``libfoo.a`` directly.
+This can be used to locate static libraries on UNIX-like systems.
+
+If the library found is a framework, then ``<VAR>`` will be set to the full
+path to the framework ``<fullPath>/A.framework``.  When a full path to a
+framework is used as a library, CMake will use a ``-framework A``, and a
+``-F<fullPath>`` to link the framework to the target.
+
+If the :prop_gbl:`FIND_LIBRARY_USE_LIB64_PATHS` global property is set
+all search paths will be tested as normal, with ``64/`` appended, and
+with all matches of ``lib/`` replaced with ``lib64/``.  This property is
+automatically set for the platforms that are known to need it if at
+least one of the languages supported by the :command:`project` command
+is enabled.
diff --git a/share/cmake-3.6/Help/command/find_package.rst b/share/cmake-3.6/Help/command/find_package.rst
new file mode 100644
index 0000000..58dff9d
--- /dev/null
+++ b/share/cmake-3.6/Help/command/find_package.rst
@@ -0,0 +1,344 @@
+find_package
+------------
+
+Load settings for an external project.
+
+::
+
+  find_package(<package> [version] [EXACT] [QUIET] [MODULE]
+               [REQUIRED] [[COMPONENTS] [components...]]
+               [OPTIONAL_COMPONENTS components...]
+               [NO_POLICY_SCOPE])
+
+Finds and loads settings from an external project.  ``<package>_FOUND``
+will be set to indicate whether the package was found.  When the
+package is found package-specific information is provided through
+variables and :ref:`Imported Targets` documented by the package itself.  The
+``QUIET`` option disables messages if the package cannot be found.  The
+``MODULE`` option disables the second signature documented below.  The
+``REQUIRED`` option stops processing with an error message if the package
+cannot be found.
+
+A package-specific list of required components may be listed after the
+``COMPONENTS`` option (or after the ``REQUIRED`` option if present).
+Additional optional components may be listed after
+``OPTIONAL_COMPONENTS``.  Available components and their influence on
+whether a package is considered to be found are defined by the target
+package.
+
+The ``[version]`` argument requests a version with which the package found
+should be compatible (format is ``major[.minor[.patch[.tweak]]]``).  The
+``EXACT`` option requests that the version be matched exactly.  If no
+``[version]`` and/or component list is given to a recursive invocation
+inside a find-module, the corresponding arguments are forwarded
+automatically from the outer call (including the ``EXACT`` flag for
+``[version]``).  Version support is currently provided only on a
+package-by-package basis (details below).
+
+User code should generally look for packages using the above simple
+signature.  The remainder of this command documentation specifies the
+full command signature and details of the search process.  Project
+maintainers wishing to provide a package to be found by this command
+are encouraged to read on.
+
+The command has two modes by which it searches for packages: "Module"
+mode and "Config" mode.  Module mode is available when the command is
+invoked with the above reduced signature.  CMake searches for a file
+called ``Find<package>.cmake`` in the :variable:`CMAKE_MODULE_PATH`
+followed by the CMake installation.  If the file is found, it is read
+and processed by CMake.  It is responsible for finding the package,
+checking the version, and producing any needed messages.  Many
+find-modules provide limited or no support for versioning; check
+the module documentation.  If no module is found and the ``MODULE``
+option is not given the command proceeds to Config mode.
+
+The complete Config mode command signature is::
+
+  find_package(<package> [version] [EXACT] [QUIET]
+               [REQUIRED] [[COMPONENTS] [components...]]
+               [CONFIG|NO_MODULE]
+               [NO_POLICY_SCOPE]
+               [NAMES name1 [name2 ...]]
+               [CONFIGS config1 [config2 ...]]
+               [HINTS path1 [path2 ... ]]
+               [PATHS path1 [path2 ... ]]
+               [PATH_SUFFIXES suffix1 [suffix2 ...]]
+               [NO_DEFAULT_PATH]
+               [NO_CMAKE_ENVIRONMENT_PATH]
+               [NO_CMAKE_PATH]
+               [NO_SYSTEM_ENVIRONMENT_PATH]
+               [NO_CMAKE_PACKAGE_REGISTRY]
+               [NO_CMAKE_BUILDS_PATH] # Deprecated; does nothing.
+               [NO_CMAKE_SYSTEM_PATH]
+               [NO_CMAKE_SYSTEM_PACKAGE_REGISTRY]
+               [CMAKE_FIND_ROOT_PATH_BOTH |
+                ONLY_CMAKE_FIND_ROOT_PATH |
+                NO_CMAKE_FIND_ROOT_PATH])
+
+The ``CONFIG`` option may be used to skip Module mode explicitly and
+switch to Config mode.  It is synonymous to using ``NO_MODULE``.  Config
+mode is also implied by use of options not specified in the reduced
+signature.
+
+Config mode attempts to locate a configuration file provided by the
+package to be found.  A cache entry called ``<package>_DIR`` is created to
+hold the directory containing the file.  By default the command
+searches for a package with the name ``<package>``.  If the ``NAMES`` option
+is given the names following it are used instead of ``<package>``.  The
+command searches for a file called ``<name>Config.cmake`` or
+``<lower-case-name>-config.cmake`` for each name specified.  A
+replacement set of possible configuration file names may be given
+using the ``CONFIGS`` option.  The search procedure is specified below.
+Once found, the configuration file is read and processed by CMake.
+Since the file is provided by the package it already knows the
+location of package contents.  The full path to the configuration file
+is stored in the cmake variable ``<package>_CONFIG``.
+
+All configuration files which have been considered by CMake while
+searching for an installation of the package with an appropriate
+version are stored in the cmake variable ``<package>_CONSIDERED_CONFIGS``,
+the associated versions in ``<package>_CONSIDERED_VERSIONS``.
+
+If the package configuration file cannot be found CMake will generate
+an error describing the problem unless the ``QUIET`` argument is
+specified.  If ``REQUIRED`` is specified and the package is not found a
+fatal error is generated and the configure step stops executing.  If
+``<package>_DIR`` has been set to a directory not containing a
+configuration file CMake will ignore it and search from scratch.
+
+When the ``[version]`` argument is given Config mode will only find a
+version of the package that claims compatibility with the requested
+version (format is ``major[.minor[.patch[.tweak]]]``).  If the ``EXACT``
+option is given only a version of the package claiming an exact match
+of the requested version may be found.  CMake does not establish any
+convention for the meaning of version numbers.  Package version
+numbers are checked by "version" files provided by the packages
+themselves.  For a candidate package configuration file
+``<config-file>.cmake`` the corresponding version file is located next
+to it and named either ``<config-file>-version.cmake`` or
+``<config-file>Version.cmake``.  If no such version file is available
+then the configuration file is assumed to not be compatible with any
+requested version.  A basic version file containing generic version
+matching code can be created using the
+:module:`CMakePackageConfigHelpers` module.  When a version file
+is found it is loaded to check the requested version number.  The
+version file is loaded in a nested scope in which the following
+variables have been defined:
+
+``PACKAGE_FIND_NAME``
+  the ``<package>`` name
+``PACKAGE_FIND_VERSION``
+  full requested version string
+``PACKAGE_FIND_VERSION_MAJOR``
+  major version if requested, else 0
+``PACKAGE_FIND_VERSION_MINOR``
+  minor version if requested, else 0
+``PACKAGE_FIND_VERSION_PATCH``
+  patch version if requested, else 0
+``PACKAGE_FIND_VERSION_TWEAK``
+  tweak version if requested, else 0
+``PACKAGE_FIND_VERSION_COUNT``
+  number of version components, 0 to 4
+
+The version file checks whether it satisfies the requested version and
+sets these variables:
+
+``PACKAGE_VERSION``
+  full provided version string
+``PACKAGE_VERSION_EXACT``
+  true if version is exact match
+``PACKAGE_VERSION_COMPATIBLE``
+  true if version is compatible
+``PACKAGE_VERSION_UNSUITABLE``
+  true if unsuitable as any version
+
+These variables are checked by the ``find_package`` command to determine
+whether the configuration file provides an acceptable version.  They
+are not available after the find_package call returns.  If the version
+is acceptable the following variables are set:
+
+``<package>_VERSION``
+  full provided version string
+``<package>_VERSION_MAJOR``
+  major version if provided, else 0
+``<package>_VERSION_MINOR``
+  minor version if provided, else 0
+``<package>_VERSION_PATCH``
+  patch version if provided, else 0
+``<package>_VERSION_TWEAK``
+  tweak version if provided, else 0
+``<package>_VERSION_COUNT``
+  number of version components, 0 to 4
+
+and the corresponding package configuration file is loaded.  When
+multiple package configuration files are available whose version files
+claim compatibility with the version requested it is unspecified which
+one is chosen.  No attempt is made to choose a highest or closest
+version number.
+
+Config mode provides an elaborate interface and search procedure.
+Much of the interface is provided for completeness and for use
+internally by find-modules loaded by Module mode.  Most user code
+should simply call::
+
+  find_package(<package> [major[.minor]] [EXACT] [REQUIRED|QUIET])
+
+in order to find a package.  Package maintainers providing CMake
+package configuration files are encouraged to name and install them
+such that the procedure outlined below will find them without
+requiring use of additional options.
+
+CMake constructs a set of possible installation prefixes for the
+package.  Under each prefix several directories are searched for a
+configuration file.  The tables below show the directories searched.
+Each entry is meant for installation trees following Windows (W), UNIX
+(U), or Apple (A) conventions::
+
+  <prefix>/                                               (W)
+  <prefix>/(cmake|CMake)/                                 (W)
+  <prefix>/<name>*/                                       (W)
+  <prefix>/<name>*/(cmake|CMake)/                         (W)
+  <prefix>/(lib/<arch>|lib|share)/cmake/<name>*/          (U)
+  <prefix>/(lib/<arch>|lib|share)/<name>*/                (U)
+  <prefix>/(lib/<arch>|lib|share)/<name>*/(cmake|CMake)/  (U)
+
+On systems supporting OS X Frameworks and Application Bundles the
+following directories are searched for frameworks or bundles
+containing a configuration file::
+
+  <prefix>/<name>.framework/Resources/                    (A)
+  <prefix>/<name>.framework/Resources/CMake/              (A)
+  <prefix>/<name>.framework/Versions/*/Resources/         (A)
+  <prefix>/<name>.framework/Versions/*/Resources/CMake/   (A)
+  <prefix>/<name>.app/Contents/Resources/                 (A)
+  <prefix>/<name>.app/Contents/Resources/CMake/           (A)
+
+In all cases the ``<name>`` is treated as case-insensitive and corresponds
+to any of the names specified (``<package>`` or names given by ``NAMES``).
+Paths with ``lib/<arch>`` are enabled if the
+:variable:`CMAKE_LIBRARY_ARCHITECTURE` variable is set.  If ``PATH_SUFFIXES``
+is specified the suffixes are appended to each (W) or (U) directory entry
+one-by-one.
+
+This set of directories is intended to work in cooperation with
+projects that provide configuration files in their installation trees.
+Directories above marked with (W) are intended for installations on
+Windows where the prefix may point at the top of an application's
+installation directory.  Those marked with (U) are intended for
+installations on UNIX platforms where the prefix is shared by multiple
+packages.  This is merely a convention, so all (W) and (U) directories
+are still searched on all platforms.  Directories marked with (A) are
+intended for installations on Apple platforms.  The
+:variable:`CMAKE_FIND_FRAMEWORK` and :variable:`CMAKE_FIND_APPBUNDLE`
+variables determine the order of preference.
+
+The set of installation prefixes is constructed using the following
+steps.  If ``NO_DEFAULT_PATH`` is specified all ``NO_*`` options are
+enabled.
+
+1. Search paths specified in cmake-specific cache variables.  These
+   are intended to be used on the command line with a ``-DVAR=value``.
+   This can be skipped if ``NO_CMAKE_PATH`` is passed::
+
+     CMAKE_PREFIX_PATH
+     CMAKE_FRAMEWORK_PATH
+     CMAKE_APPBUNDLE_PATH
+
+2. Search paths specified in cmake-specific environment variables.
+   These are intended to be set in the user's shell configuration.
+   This can be skipped if ``NO_CMAKE_ENVIRONMENT_PATH`` is passed::
+
+     <package>_DIR
+     CMAKE_PREFIX_PATH
+     CMAKE_FRAMEWORK_PATH
+     CMAKE_APPBUNDLE_PATH
+
+3. Search paths specified by the ``HINTS`` option.  These should be paths
+   computed by system introspection, such as a hint provided by the
+   location of another item already found.  Hard-coded guesses should
+   be specified with the ``PATHS`` option.
+
+4. Search the standard system environment variables.  This can be
+   skipped if ``NO_SYSTEM_ENVIRONMENT_PATH`` is passed.  Path entries
+   ending in ``/bin`` or ``/sbin`` are automatically converted to their
+   parent directories::
+
+     PATH
+
+5. Search paths stored in the CMake :ref:`User Package Registry`.
+   This can be skipped if ``NO_CMAKE_PACKAGE_REGISTRY`` is passed or by
+   setting the :variable:`CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY`
+   to ``TRUE``.
+   See the :manual:`cmake-packages(7)` manual for details on the user
+   package registry.
+
+6. Search cmake variables defined in the Platform files for the
+   current system.  This can be skipped if ``NO_CMAKE_SYSTEM_PATH`` is
+   passed::
+
+     CMAKE_SYSTEM_PREFIX_PATH
+     CMAKE_SYSTEM_FRAMEWORK_PATH
+     CMAKE_SYSTEM_APPBUNDLE_PATH
+
+7. Search paths stored in the CMake :ref:`System Package Registry`.
+   This can be skipped if ``NO_CMAKE_SYSTEM_PACKAGE_REGISTRY`` is passed
+   or by setting the
+   :variable:`CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY` to ``TRUE``.
+   See the :manual:`cmake-packages(7)` manual for details on the system
+   package registry.
+
+8. Search paths specified by the ``PATHS`` option.  These are typically
+   hard-coded guesses.
+
+.. |FIND_XXX| replace:: find_package
+.. |FIND_ARGS_XXX| replace:: <package>
+.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
+   :variable:`CMAKE_FIND_ROOT_PATH_MODE_PACKAGE`
+
+.. include:: FIND_XXX_ROOT.txt
+.. include:: FIND_XXX_ORDER.txt
+
+Every non-REQUIRED ``find_package`` call can be disabled by setting the
+:variable:`CMAKE_DISABLE_FIND_PACKAGE_<PackageName>` variable to ``TRUE``.
+
+When loading a find module or package configuration file ``find_package``
+defines variables to provide information about the call arguments (and
+restores their original state before returning):
+
+``CMAKE_FIND_PACKAGE_NAME``
+  the ``<package>`` name which is searched for
+``<package>_FIND_REQUIRED``
+  true if ``REQUIRED`` option was given
+``<package>_FIND_QUIETLY``
+  true if ``QUIET`` option was given
+``<package>_FIND_VERSION``
+  full requested version string
+``<package>_FIND_VERSION_MAJOR``
+  major version if requested, else 0
+``<package>_FIND_VERSION_MINOR``
+  minor version if requested, else 0
+``<package>_FIND_VERSION_PATCH``
+  patch version if requested, else 0
+``<package>_FIND_VERSION_TWEAK``
+  tweak version if requested, else 0
+``<package>_FIND_VERSION_COUNT``
+  number of version components, 0 to 4
+``<package>_FIND_VERSION_EXACT``
+  true if ``EXACT`` option was given
+``<package>_FIND_COMPONENTS``
+  list of requested components
+``<package>_FIND_REQUIRED_<c>``
+  true if component ``<c>`` is required,
+  false if component ``<c>`` is optional
+
+In Module mode the loaded find module is responsible to honor the
+request detailed by these variables; see the find module for details.
+In Config mode ``find_package`` handles ``REQUIRED``, ``QUIET``, and
+``[version]`` options automatically but leaves it to the package
+configuration file to handle components in a way that makes sense
+for the package.  The package configuration file may set
+``<package>_FOUND`` to false to tell ``find_package`` that component
+requirements are not satisfied.
+
+See the :command:`cmake_policy` command documentation for discussion
+of the ``NO_POLICY_SCOPE`` option.
diff --git a/share/cmake-3.6/Help/command/find_path.rst b/share/cmake-3.6/Help/command/find_path.rst
new file mode 100644
index 0000000..76342d0
--- /dev/null
+++ b/share/cmake-3.6/Help/command/find_path.rst
@@ -0,0 +1,39 @@
+find_path
+---------
+
+.. |FIND_XXX| replace:: find_path
+.. |NAMES| replace:: NAMES name1 [name2 ...]
+.. |SEARCH_XXX| replace:: file in a directory
+.. |SEARCH_XXX_DESC| replace:: directory containing the named file
+.. |prefix_XXX_SUBDIR| replace:: ``<prefix>/include``
+.. |entry_XXX_SUBDIR| replace:: ``<entry>/include``
+
+.. |CMAKE_PREFIX_PATH_XXX| replace::
+   ``<prefix>/include/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE`
+   is set, and |CMAKE_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_XXX_PATH| replace:: :variable:`CMAKE_INCLUDE_PATH`
+.. |CMAKE_XXX_MAC_PATH| replace:: :variable:`CMAKE_FRAMEWORK_PATH`
+
+.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: Directories in ``INCLUDE``.
+   On Windows hosts:
+   ``<prefix>/include/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE`
+   is set, and |SYSTEM_ENVIRONMENT_PREFIX_PATH_XXX_SUBDIR|, and the
+   directories in ``PATH`` itself.
+
+.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
+   ``<prefix>/include/<arch>`` if :variable:`CMAKE_LIBRARY_ARCHITECTURE`
+   is set, and |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_SYSTEM_XXX_PATH| replace::
+   :variable:`CMAKE_SYSTEM_INCLUDE_PATH`
+.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace::
+   :variable:`CMAKE_SYSTEM_FRAMEWORK_PATH`
+
+.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
+   :variable:`CMAKE_FIND_ROOT_PATH_MODE_INCLUDE`
+
+.. include:: FIND_XXX.txt
+
+When searching for frameworks, if the file is specified as ``A/b.h``, then
+the framework search will look for ``A.framework/Headers/b.h``.  If that
+is found the path will be set to the path to the framework.  CMake
+will convert this to the correct ``-F`` option to include the file.
diff --git a/share/cmake-3.6/Help/command/find_program.rst b/share/cmake-3.6/Help/command/find_program.rst
new file mode 100644
index 0000000..d3430c0
--- /dev/null
+++ b/share/cmake-3.6/Help/command/find_program.rst
@@ -0,0 +1,33 @@
+find_program
+------------
+
+.. |FIND_XXX| replace:: find_program
+.. |NAMES| replace:: NAMES name1 [name2 ...] [NAMES_PER_DIR]
+.. |SEARCH_XXX| replace:: program
+.. |SEARCH_XXX_DESC| replace:: program
+.. |prefix_XXX_SUBDIR| replace:: ``<prefix>/[s]bin``
+.. |entry_XXX_SUBDIR| replace:: ``<entry>/[s]bin``
+
+.. |CMAKE_PREFIX_PATH_XXX| replace::
+   |CMAKE_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_XXX_PATH| replace:: :variable:`CMAKE_PROGRAM_PATH`
+.. |CMAKE_XXX_MAC_PATH| replace:: :variable:`CMAKE_APPBUNDLE_PATH`
+
+.. |SYSTEM_ENVIRONMENT_PATH_XXX| replace:: ``PATH``
+
+.. |CMAKE_SYSTEM_PREFIX_PATH_XXX| replace::
+   |CMAKE_SYSTEM_PREFIX_PATH_XXX_SUBDIR|
+.. |CMAKE_SYSTEM_XXX_PATH| replace::
+   :variable:`CMAKE_SYSTEM_PROGRAM_PATH`
+.. |CMAKE_SYSTEM_XXX_MAC_PATH| replace::
+   :variable:`CMAKE_SYSTEM_APPBUNDLE_PATH`
+
+.. |CMAKE_FIND_ROOT_PATH_MODE_XXX| replace::
+   :variable:`CMAKE_FIND_ROOT_PATH_MODE_PROGRAM`
+
+.. include:: FIND_XXX.txt
+
+When more than one value is given to the ``NAMES`` option this command by
+default will consider one name at a time and search every directory
+for it.  The ``NAMES_PER_DIR`` option tells this command to consider one
+directory at a time and search for all names in it.
diff --git a/share/cmake-3.6/Help/command/fltk_wrap_ui.rst b/share/cmake-3.6/Help/command/fltk_wrap_ui.rst
new file mode 100644
index 0000000..041e5a7
--- /dev/null
+++ b/share/cmake-3.6/Help/command/fltk_wrap_ui.rst
@@ -0,0 +1,14 @@
+fltk_wrap_ui
+------------
+
+Create FLTK user interfaces Wrappers.
+
+::
+
+  fltk_wrap_ui(resultingLibraryName source1
+               source2 ... sourceN )
+
+Produce .h and .cxx files for all the .fl and .fld files listed.  The
+resulting .h and .cxx files will be added to a variable named
+``resultingLibraryName_FLTK_UI_SRCS`` which should be added to your
+library.
diff --git a/share/cmake-3.6/Help/command/foreach.rst b/share/cmake-3.6/Help/command/foreach.rst
new file mode 100644
index 0000000..c0f3679
--- /dev/null
+++ b/share/cmake-3.6/Help/command/foreach.rst
@@ -0,0 +1,47 @@
+foreach
+-------
+
+Evaluate a group of commands for each value in a list.
+
+::
+
+  foreach(loop_var arg1 arg2 ...)
+    COMMAND1(ARGS ...)
+    COMMAND2(ARGS ...)
+    ...
+  endforeach(loop_var)
+
+All commands between foreach and the matching endforeach are recorded
+without being invoked.  Once the endforeach is evaluated, the recorded
+list of commands is invoked once for each argument listed in the
+original foreach command.  Before each iteration of the loop
+``${loop_var}`` will be set as a variable with the current value in the
+list.
+
+::
+
+  foreach(loop_var RANGE total)
+  foreach(loop_var RANGE start stop [step])
+
+Foreach can also iterate over a generated range of numbers.  There are
+three types of this iteration:
+
+* When specifying single number, the range will have elements 0 to
+  "total".
+
+* When specifying two numbers, the range will have elements from the
+  first number to the second number.
+
+* The third optional number is the increment used to iterate from the
+  first number to the second number.
+
+::
+
+  foreach(loop_var IN [LISTS [list1 [...]]]
+                      [ITEMS [item1 [...]]])
+
+Iterates over a precise list of items.  The ``LISTS`` option names
+list-valued variables to be traversed, including empty elements (an
+empty string is a zero-length list).  (Note macro
+arguments are not variables.)  The ``ITEMS`` option ends argument
+parsing and includes all arguments following it in the iteration.
diff --git a/share/cmake-3.6/Help/command/function.rst b/share/cmake-3.6/Help/command/function.rst
new file mode 100644
index 0000000..7ffdfee
--- /dev/null
+++ b/share/cmake-3.6/Help/command/function.rst
@@ -0,0 +1,36 @@
+function
+--------
+
+Start recording a function for later invocation as a command::
+
+  function(<name> [arg1 [arg2 [arg3 ...]]])
+    COMMAND1(ARGS ...)
+    COMMAND2(ARGS ...)
+    ...
+  endfunction(<name>)
+
+Define a function named ``<name>`` that takes arguments named ``arg1``,
+``arg2``, ``arg3``, (...).
+Commands listed after function, but before the matching
+:command:`endfunction()`, are not invoked until the function is invoked.
+When it is invoked, the commands recorded in the function are first
+modified by replacing formal parameters (``${arg1}``) with the arguments
+passed, and then invoked as normal commands.
+In addition to referencing the formal parameters you can reference the
+``ARGC`` variable which will be set to the number of arguments passed
+into the function as well as ``ARGV0``, ``ARGV1``, ``ARGV2``, ...  which
+will have the actual values of the arguments passed in.
+This facilitates creating functions with optional arguments.
+Additionally ``ARGV`` holds the list of all arguments given to the
+function and ``ARGN`` holds the list of arguments past the last expected
+argument.
+Referencing to ``ARGV#`` arguments beyond ``ARGC`` have undefined
+behavior. Checking that ``ARGC`` is greater than ``#`` is the only way
+to ensure that ``ARGV#`` was passed to the function as an extra
+argument.
+
+A function opens a new scope: see :command:`set(var PARENT_SCOPE)` for
+details.
+
+See the :command:`cmake_policy()` command documentation for the behavior
+of policies inside functions.
diff --git a/share/cmake-3.6/Help/command/get_cmake_property.rst b/share/cmake-3.6/Help/command/get_cmake_property.rst
new file mode 100644
index 0000000..3a6fb41
--- /dev/null
+++ b/share/cmake-3.6/Help/command/get_cmake_property.rst
@@ -0,0 +1,15 @@
+get_cmake_property
+------------------
+
+Get a property of the CMake instance.
+
+::
+
+  get_cmake_property(VAR property)
+
+Get a property from the CMake instance.  The value of the property is
+stored in the variable ``VAR``.  If the property is not found, ``VAR``
+will be  set to "NOTFOUND".  See the :manual:`cmake-properties(7)` manual
+for available properties.
+
+See also the more general :command:`get_property` command.
diff --git a/share/cmake-3.6/Help/command/get_directory_property.rst b/share/cmake-3.6/Help/command/get_directory_property.rst
new file mode 100644
index 0000000..e50abe0
--- /dev/null
+++ b/share/cmake-3.6/Help/command/get_directory_property.rst
@@ -0,0 +1,24 @@
+get_directory_property
+----------------------
+
+Get a property of ``DIRECTORY`` scope.
+
+::
+
+  get_directory_property(<variable> [DIRECTORY <dir>] <prop-name>)
+
+Store a property of directory scope in the named variable.  If the
+property is not defined the empty-string is returned.  The ``DIRECTORY``
+argument specifies another directory from which to retrieve the
+property value.  The specified directory must have already been
+traversed by CMake.
+
+::
+
+  get_directory_property(<variable> [DIRECTORY <dir>]
+                         DEFINITION <var-name>)
+
+Get a variable definition from a directory.  This form is useful to
+get a variable definition from another directory.
+
+See also the more general :command:`get_property` command.
diff --git a/share/cmake-3.6/Help/command/get_filename_component.rst b/share/cmake-3.6/Help/command/get_filename_component.rst
new file mode 100644
index 0000000..14c8cf2
--- /dev/null
+++ b/share/cmake-3.6/Help/command/get_filename_component.rst
@@ -0,0 +1,64 @@
+get_filename_component
+----------------------
+
+Get a specific component of a full filename.
+
+------------------------------------------------------------------------------
+
+::
+
+  get_filename_component(<VAR> <FileName> <COMP> [CACHE])
+
+Set ``<VAR>`` to a component of ``<FileName>``, where ``<COMP>`` is one of:
+
+::
+
+ DIRECTORY = Directory without file name
+ NAME      = File name without directory
+ EXT       = File name longest extension (.b.c from d/a.b.c)
+ NAME_WE   = File name without directory or longest extension
+ PATH      = Legacy alias for DIRECTORY (use for CMake <= 2.8.11)
+
+Paths are returned with forward slashes and have no trailing slashes.
+The longest file extension is always considered.  If the optional
+``CACHE`` argument is specified, the result variable is added to the
+cache.
+
+------------------------------------------------------------------------------
+
+::
+
+  get_filename_component(<VAR> <FileName>
+                         <COMP> [BASE_DIR <BASE_DIR>]
+                         [CACHE])
+
+Set ``<VAR>`` to the absolute path of ``<FileName>``, where ``<COMP>`` is one
+of:
+
+::
+
+ ABSOLUTE  = Full path to file
+ REALPATH  = Full path to existing file with symlinks resolved
+
+If the provided ``<FileName>`` is a relative path, it is evaluated relative
+to the given base directory ``<BASE_DIR>``.  If no base directory is
+provided, the default base directory will be
+:variable:`CMAKE_CURRENT_SOURCE_DIR`.
+
+Paths are returned with forward slashes and have no trailing slahes.  If the
+optional ``CACHE`` argument is specified, the result variable is added to the
+cache.
+
+------------------------------------------------------------------------------
+
+::
+
+  get_filename_component(<VAR> <FileName>
+                         PROGRAM [PROGRAM_ARGS <ARG_VAR>]
+                         [CACHE])
+
+The program in ``<FileName>`` will be found in the system search path or
+left as a full path.  If ``PROGRAM_ARGS`` is present with ``PROGRAM``, then
+any command-line arguments present in the ``<FileName>`` string are split
+from the program name and stored in ``<ARG_VAR>``.  This is used to
+separate a program name from its arguments in a command line string.
diff --git a/share/cmake-3.2/Help/command/get_property.rst b/share/cmake-3.6/Help/command/get_property.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/get_property.rst
rename to share/cmake-3.6/Help/command/get_property.rst
diff --git a/share/cmake-3.6/Help/command/get_source_file_property.rst b/share/cmake-3.6/Help/command/get_source_file_property.rst
new file mode 100644
index 0000000..3e975c2
--- /dev/null
+++ b/share/cmake-3.6/Help/command/get_source_file_property.rst
@@ -0,0 +1,16 @@
+get_source_file_property
+------------------------
+
+Get a property for a source file.
+
+::
+
+  get_source_file_property(VAR file property)
+
+Get a property from a source file.  The value of the property is
+stored in the variable ``VAR``.  If the property is not found, ``VAR``
+will be set to "NOTFOUND".  Use :command:`set_source_files_properties`
+to set property values.  Source file properties usually control how the
+file is built. One property that is always there is :prop_sf:`LOCATION`
+
+See also the more general :command:`get_property` command.
diff --git a/share/cmake-3.6/Help/command/get_target_property.rst b/share/cmake-3.6/Help/command/get_target_property.rst
new file mode 100644
index 0000000..2a72c3a
--- /dev/null
+++ b/share/cmake-3.6/Help/command/get_target_property.rst
@@ -0,0 +1,18 @@
+get_target_property
+-------------------
+
+Get a property from a target.
+
+::
+
+  get_target_property(VAR target property)
+
+Get a property from a target.  The value of the property is stored in
+the variable ``VAR``.  If the property is not found, ``VAR`` will be set to
+"NOTFOUND".  Use :command:`set_target_properties` to set property values.
+Properties are usually used to control how a target is built, but some
+query the target instead.  This command can get properties for any
+target so far created.  The targets do not need to be in the current
+``CMakeLists.txt`` file.
+
+See also the more general :command:`get_property` command.
diff --git a/share/cmake-3.6/Help/command/get_test_property.rst b/share/cmake-3.6/Help/command/get_test_property.rst
new file mode 100644
index 0000000..e359f4b
--- /dev/null
+++ b/share/cmake-3.6/Help/command/get_test_property.rst
@@ -0,0 +1,15 @@
+get_test_property
+-----------------
+
+Get a property of the test.
+
+::
+
+  get_test_property(test property VAR)
+
+Get a property from the test.  The value of the property is stored in
+the variable ``VAR``.  If the test or property is not found, ``VAR`` will
+be set to "NOTFOUND".  For a list of standard properties you can type
+``cmake --help-property-list``.
+
+See also the more general :command:`get_property` command.
diff --git a/share/cmake-3.6/Help/command/if.rst b/share/cmake-3.6/Help/command/if.rst
new file mode 100644
index 0000000..56e618c
--- /dev/null
+++ b/share/cmake-3.6/Help/command/if.rst
@@ -0,0 +1,216 @@
+if
+--
+
+Conditionally execute a group of commands.
+
+.. code-block:: cmake
+
+ if(expression)
+   # then section.
+   COMMAND1(ARGS ...)
+   COMMAND2(ARGS ...)
+   ...
+ elseif(expression2)
+   # elseif section.
+   COMMAND1(ARGS ...)
+   COMMAND2(ARGS ...)
+   ...
+ else(expression)
+   # else section.
+   COMMAND1(ARGS ...)
+   COMMAND2(ARGS ...)
+   ...
+ endif(expression)
+
+Evaluates the given expression.  If the result is true, the commands
+in the THEN section are invoked.  Otherwise, the commands in the else
+section are invoked.  The elseif and else sections are optional.  You
+may have multiple elseif clauses.  Note that the expression in the
+else and endif clause is optional.  Long expressions can be used and
+there is a traditional order of precedence.  Parenthetical expressions
+are evaluated first followed by unary tests such as ``EXISTS``,
+``COMMAND``, and ``DEFINED``.  Then any binary tests such as
+``EQUAL``, ``LESS``, ``GREATER``, ``STRLESS``, ``STRGREATER``,
+``STREQUAL``, and ``MATCHES`` will be evaluated.  Then boolean ``NOT``
+operators and finally boolean ``AND`` and then ``OR`` operators will
+be evaluated.
+
+Possible expressions are:
+
+``if(<constant>)``
+ True if the constant is ``1``, ``ON``, ``YES``, ``TRUE``, ``Y``,
+ or a non-zero number.  False if the constant is ``0``, ``OFF``,
+ ``NO``, ``FALSE``, ``N``, ``IGNORE``, ``NOTFOUND``, the empty string,
+ or ends in the suffix ``-NOTFOUND``.  Named boolean constants are
+ case-insensitive.  If the argument is not one of these specific
+ constants, it is treated as a variable or string and the following
+ signature is used.
+
+``if(<variable|string>)``
+ True if given a variable that is defined to a value that is not a false
+ constant.  False otherwise.  (Note macro arguments are not variables.)
+
+``if(NOT <expression>)``
+ True if the expression is not true.
+
+``if(<expr1> AND <expr2>)``
+ True if both expressions would be considered true individually.
+
+``if(<expr1> OR <expr2>)``
+ True if either expression would be considered true individually.
+
+``if(COMMAND command-name)``
+ True if the given name is a command, macro or function that can be
+ invoked.
+
+``if(POLICY policy-id)``
+ True if the given name is an existing policy (of the form ``CMP<NNNN>``).
+
+``if(TARGET target-name)``
+ True if the given name is an existing logical target name created
+ by a call to the :command:`add_executable`, :command:`add_library`,
+ or :command:`add_custom_target` command that has already been invoked
+ (in any directory).
+
+``if(TEST test-name)``
+ True if the given name is an existing test name created by the
+ :command:`add_test` command.
+
+``if(EXISTS path-to-file-or-directory)``
+ True if the named file or directory exists.  Behavior is well-defined
+ only for full paths.
+
+``if(file1 IS_NEWER_THAN file2)``
+ True if ``file1`` is newer than ``file2`` or if one of the two files doesn't
+ exist.  Behavior is well-defined only for full paths.  If the file
+ time stamps are exactly the same, an ``IS_NEWER_THAN`` comparison returns
+ true, so that any dependent build operations will occur in the event
+ of a tie.  This includes the case of passing the same file name for
+ both file1 and file2.
+
+``if(IS_DIRECTORY path-to-directory)``
+ True if the given name is a directory.  Behavior is well-defined only
+ for full paths.
+
+``if(IS_SYMLINK file-name)``
+ True if the given name is a symbolic link.  Behavior is well-defined
+ only for full paths.
+
+``if(IS_ABSOLUTE path)``
+ True if the given path is an absolute path.
+
+``if(<variable|string> MATCHES regex)``
+ True if the given string or variable's value matches the given regular
+ expression.
+
+``if(<variable|string> LESS <variable|string>)``
+ True if the given string or variable's value is a valid number and less
+ than that on the right.
+
+``if(<variable|string> GREATER <variable|string>)``
+ True if the given string or variable's value is a valid number and greater
+ than that on the right.
+
+``if(<variable|string> EQUAL <variable|string>)``
+ True if the given string or variable's value is a valid number and equal
+ to that on the right.
+
+``if(<variable|string> STRLESS <variable|string>)``
+ True if the given string or variable's value is lexicographically less
+ than the string or variable on the right.
+
+``if(<variable|string> STRGREATER <variable|string>)``
+ True if the given string or variable's value is lexicographically greater
+ than the string or variable on the right.
+
+``if(<variable|string> STREQUAL <variable|string>)``
+ True if the given string or variable's value is lexicographically equal
+ to the string or variable on the right.
+
+``if(<variable|string> VERSION_LESS <variable|string>)``
+ Component-wise integer version number comparison (version format is
+ ``major[.minor[.patch[.tweak]]]``).
+
+``if(<variable|string> VERSION_EQUAL <variable|string>)``
+ Component-wise integer version number comparison (version format is
+ ``major[.minor[.patch[.tweak]]]``).
+
+``if(<variable|string> VERSION_GREATER <variable|string>)``
+ Component-wise integer version number comparison (version format is
+ ``major[.minor[.patch[.tweak]]]``).
+
+``if(<variable|string> IN_LIST <variable>)``
+ True if the given element is contained in the named list variable.
+
+``if(DEFINED <variable>)``
+ True if the given variable is defined.  It does not matter if the
+ variable is true or false just if it has been set.  (Note macro
+ arguments are not variables.)
+
+``if((expression) AND (expression OR (expression)))``
+ The expressions inside the parenthesis are evaluated first and then
+ the remaining expression is evaluated as in the previous examples.
+ Where there are nested parenthesis the innermost are evaluated as part
+ of evaluating the expression that contains them.
+
+The if command was written very early in CMake's history, predating
+the ``${}`` variable evaluation syntax, and for convenience evaluates
+variables named by its arguments as shown in the above signatures.
+Note that normal variable evaluation with ``${}`` applies before the if
+command even receives the arguments.  Therefore code like::
+
+ set(var1 OFF)
+ set(var2 "var1")
+ if(${var2})
+
+appears to the if command as::
+
+ if(var1)
+
+and is evaluated according to the ``if(<variable>)`` case documented
+above.  The result is ``OFF`` which is false.  However, if we remove the
+``${}`` from the example then the command sees::
+
+ if(var2)
+
+which is true because ``var2`` is defined to "var1" which is not a false
+constant.
+
+Automatic evaluation applies in the other cases whenever the
+above-documented signature accepts ``<variable|string>``:
+
+* The left hand argument to ``MATCHES`` is first checked to see if it is
+  a defined variable, if so the variable's value is used, otherwise the
+  original value is used.
+
+* If the left hand argument to ``MATCHES`` is missing it returns false
+  without error
+
+* Both left and right hand arguments to ``LESS``, ``GREATER``, and
+  ``EQUAL`` are independently tested to see if they are defined
+  variables, if so their defined values are used otherwise the original
+  value is used.
+
+* Both left and right hand arguments to ``STRLESS``, ``STREQUAL``, and
+  ``STRGREATER`` are independently tested to see if they are defined
+  variables, if so their defined values are used otherwise the original
+  value is used.
+
+* Both left and right hand arguments to ``VERSION_LESS``,
+  ``VERSION_EQUAL``, and ``VERSION_GREATER`` are independently tested
+  to see if they are defined variables, if so their defined values are
+  used otherwise the original value is used.
+
+* The right hand argument to ``NOT`` is tested to see if it is a boolean
+  constant, if so the value is used, otherwise it is assumed to be a
+  variable and it is dereferenced.
+
+* The left and right hand arguments to ``AND`` and ``OR`` are independently
+  tested to see if they are boolean constants, if so they are used as
+  such, otherwise they are assumed to be variables and are dereferenced.
+
+To prevent ambiguity, potential variable or keyword names can be
+specified in a :ref:`Quoted Argument` or a :ref:`Bracket Argument`.
+A quoted or bracketed variable or keyword will be interpreted as a
+string and not dereferenced or interpreted.
+See policy :policy:`CMP0054`.
diff --git a/share/cmake-3.6/Help/command/include.rst b/share/cmake-3.6/Help/command/include.rst
new file mode 100644
index 0000000..c391561
--- /dev/null
+++ b/share/cmake-3.6/Help/command/include.rst
@@ -0,0 +1,25 @@
+include
+-------
+
+Load and run CMake code from a file or module.
+
+::
+
+  include(<file|module> [OPTIONAL] [RESULT_VARIABLE <VAR>]
+                        [NO_POLICY_SCOPE])
+
+Load and run CMake code from the file given.  Variable reads and
+writes access the scope of the caller (dynamic scoping).  If ``OPTIONAL``
+is present, then no error is raised if the file does not exist.  If
+``RESULT_VARIABLE`` is given the variable will be set to the full filename
+which has been included or NOTFOUND if it failed.
+
+If a module is specified instead of a file, the file with name
+<modulename>.cmake is searched first in :variable:`CMAKE_MODULE_PATH`,
+then in the CMake module directory.  There is one exception to this: if
+the file which calls ``include()`` is located itself in the CMake module
+directory, then first the CMake module directory is searched and
+:variable:`CMAKE_MODULE_PATH` afterwards.  See also policy :policy:`CMP0017`.
+
+See the :command:`cmake_policy` command documentation for discussion of the
+``NO_POLICY_SCOPE`` option.
diff --git a/share/cmake-3.2/Help/command/include_directories.rst b/share/cmake-3.6/Help/command/include_directories.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/include_directories.rst
rename to share/cmake-3.6/Help/command/include_directories.rst
diff --git a/share/cmake-3.6/Help/command/include_external_msproject.rst b/share/cmake-3.6/Help/command/include_external_msproject.rst
new file mode 100644
index 0000000..18a2b50
--- /dev/null
+++ b/share/cmake-3.6/Help/command/include_external_msproject.rst
@@ -0,0 +1,22 @@
+include_external_msproject
+--------------------------
+
+Include an external Microsoft project file in a workspace.
+
+::
+
+  include_external_msproject(projectname location
+                             [TYPE projectTypeGUID]
+                             [GUID projectGUID]
+                             [PLATFORM platformName]
+                             dep1 dep2 ...)
+
+Includes an external Microsoft project in the generated workspace
+file.  Currently does nothing on UNIX.  This will create a target
+named [projectname].  This can be used in the :command:`add_dependencies`
+command to make things depend on the external project.
+
+``TYPE``, ``GUID`` and ``PLATFORM`` are optional parameters that allow one to
+specify the type of project, id (GUID) of the project and the name of
+the target platform.  This is useful for projects requiring values
+other than the default (e.g.  WIX projects).
diff --git a/share/cmake-3.6/Help/command/include_regular_expression.rst b/share/cmake-3.6/Help/command/include_regular_expression.rst
new file mode 100644
index 0000000..ab5a563
--- /dev/null
+++ b/share/cmake-3.6/Help/command/include_regular_expression.rst
@@ -0,0 +1,18 @@
+include_regular_expression
+--------------------------
+
+Set the regular expression used for dependency checking.
+
+::
+
+  include_regular_expression(regex_match [regex_complain])
+
+Set the regular expressions used in dependency checking.  Only files
+matching ``regex_match`` will be traced as dependencies.  Only files
+matching ``regex_complain`` will generate warnings if they cannot be found
+(standard header paths are not searched).  The defaults are:
+
+::
+
+  regex_match    = "^.*$" (match everything)
+  regex_complain = "^$" (match empty string only)
diff --git a/share/cmake-3.6/Help/command/install.rst b/share/cmake-3.6/Help/command/install.rst
new file mode 100644
index 0000000..aaf12cc
--- /dev/null
+++ b/share/cmake-3.6/Help/command/install.rst
@@ -0,0 +1,367 @@
+install
+-------
+
+.. only:: html
+
+   .. contents::
+
+Specify rules to run at install time.
+
+Introduction
+^^^^^^^^^^^^
+
+This command generates installation rules for a project.  Rules
+specified by calls to this command within a source directory are
+executed in order during installation.  The order across directories
+is not defined.
+
+There are multiple signatures for this command.  Some of them define
+installation options for files and targets.  Options common to
+multiple signatures are covered here but they are valid only for
+signatures that specify them.  The common options are:
+
+``DESTINATION``
+  Specify the directory on disk to which a file will be installed.
+  If a full path (with a leading slash or drive letter) is given
+  it is used directly.  If a relative path is given it is interpreted
+  relative to the value of the :variable:`CMAKE_INSTALL_PREFIX` variable.
+  The prefix can be relocated at install time using the ``DESTDIR``
+  mechanism explained in the :variable:`CMAKE_INSTALL_PREFIX` variable
+  documentation.
+
+``PERMISSIONS``
+  Specify permissions for installed files.  Valid permissions are
+  ``OWNER_READ``, ``OWNER_WRITE``, ``OWNER_EXECUTE``, ``GROUP_READ``,
+  ``GROUP_WRITE``, ``GROUP_EXECUTE``, ``WORLD_READ``, ``WORLD_WRITE``,
+  ``WORLD_EXECUTE``, ``SETUID``, and ``SETGID``.  Permissions that do
+  not make sense on certain platforms are ignored on those platforms.
+
+``CONFIGURATIONS``
+  Specify a list of build configurations for which the install rule
+  applies (Debug, Release, etc.).
+
+``COMPONENT``
+  Specify an installation component name with which the install rule
+  is associated, such as "runtime" or "development".  During
+  component-specific installation only install rules associated with
+  the given component name will be executed.  During a full installation
+  all components are installed unless marked with ``EXCLUDE_FROM_ALL``.
+  If ``COMPONENT`` is not provided a default component "Unspecified" is
+  created.  The default component name may be controlled with the
+  :variable:`CMAKE_INSTALL_DEFAULT_COMPONENT_NAME` variable.
+
+``EXCLUDE_FROM_ALL``
+  Specify that the file is excluded from a full installation and only
+  installed as part of a component-specific installation
+
+``RENAME``
+  Specify a name for an installed file that may be different from the
+  original file.  Renaming is allowed only when a single file is
+  installed by the command.
+
+``OPTIONAL``
+  Specify that it is not an error if the file to be installed does
+  not exist.
+
+Command signatures that install files may print messages during
+installation.  Use the :variable:`CMAKE_INSTALL_MESSAGE` variable
+to control which messages are printed.
+
+Installing Targets
+^^^^^^^^^^^^^^^^^^
+
+::
+
+  install(TARGETS targets... [EXPORT <export-name>]
+          [[ARCHIVE|LIBRARY|RUNTIME|FRAMEWORK|BUNDLE|
+            PRIVATE_HEADER|PUBLIC_HEADER|RESOURCE]
+           [DESTINATION <dir>]
+           [PERMISSIONS permissions...]
+           [CONFIGURATIONS [Debug|Release|...]]
+           [COMPONENT <component>]
+           [OPTIONAL] [EXCLUDE_FROM_ALL]
+           [NAMELINK_ONLY|NAMELINK_SKIP]
+          ] [...]
+          [INCLUDES DESTINATION [<dir> ...]]
+          )
+
+The ``TARGETS`` form specifies rules for installing targets from a
+project.  There are five kinds of target files that may be installed:
+``ARCHIVE``, ``LIBRARY``, ``RUNTIME``, ``FRAMEWORK``, and ``BUNDLE``.
+Executables are treated as ``RUNTIME`` targets, except that those
+marked with the ``MACOSX_BUNDLE`` property are treated as ``BUNDLE``
+targets on OS X.  Static libraries are always treated as ``ARCHIVE``
+targets.  Module libraries are always treated as ``LIBRARY`` targets.
+For non-DLL platforms shared libraries are treated as ``LIBRARY``
+targets, except that those marked with the ``FRAMEWORK`` property are
+treated as ``FRAMEWORK`` targets on OS X.  For DLL platforms the DLL
+part of a shared library is treated as a ``RUNTIME`` target and the
+corresponding import library is treated as an ``ARCHIVE`` target.
+All Windows-based systems including Cygwin are DLL platforms.
+The ``ARCHIVE``, ``LIBRARY``, ``RUNTIME``, and ``FRAMEWORK`` arguments
+change the type of target to which the subsequent properties apply.
+If none is given the installation properties apply to all target
+types.  If only one is given then only targets of that type will be
+installed (which can be used to install just a DLL or just an import
+library).
+
+The ``PRIVATE_HEADER``, ``PUBLIC_HEADER``, and ``RESOURCE`` arguments
+cause subsequent properties to be applied to installing a ``FRAMEWORK``
+shared library target's associated files on non-Apple platforms.  Rules
+defined by these arguments are ignored on Apple platforms because the
+associated files are installed into the appropriate locations inside
+the framework folder.  See documentation of the
+:prop_tgt:`PRIVATE_HEADER`, :prop_tgt:`PUBLIC_HEADER`, and
+:prop_tgt:`RESOURCE` target properties for details.
+
+Either ``NAMELINK_ONLY`` or ``NAMELINK_SKIP`` may be specified as a
+``LIBRARY`` option.  On some platforms a versioned shared library
+has a symbolic link such as::
+
+  lib<name>.so -> lib<name>.so.1
+
+where ``lib<name>.so.1`` is the soname of the library and ``lib<name>.so``
+is a "namelink" allowing linkers to find the library when given
+``-l<name>``.  The ``NAMELINK_ONLY`` option causes installation of only the
+namelink when a library target is installed.  The ``NAMELINK_SKIP`` option
+causes installation of library files other than the namelink when a
+library target is installed.  When neither option is given both
+portions are installed.  On platforms where versioned shared libraries
+do not have namelinks or when a library is not versioned the
+``NAMELINK_SKIP`` option installs the library and the ``NAMELINK_ONLY``
+option installs nothing.  See the :prop_tgt:`VERSION` and
+:prop_tgt:`SOVERSION` target properties for details on creating versioned
+shared libraries.
+
+The ``INCLUDES DESTINATION`` specifies a list of directories
+which will be added to the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`
+target property of the ``<targets>`` when exported by the
+:command:`install(EXPORT)` command.  If a relative path is
+specified, it is treated as relative to the ``$<INSTALL_PREFIX>``.
+This is independent of the rest of the argument groups and does
+not actually install anything.
+
+One or more groups of properties may be specified in a single call to
+the ``TARGETS`` form of this command.  A target may be installed more than
+once to different locations.  Consider hypothetical targets ``myExe``,
+``mySharedLib``, and ``myStaticLib``.  The code:
+
+.. code-block:: cmake
+
+  install(TARGETS myExe mySharedLib myStaticLib
+          RUNTIME DESTINATION bin
+          LIBRARY DESTINATION lib
+          ARCHIVE DESTINATION lib/static)
+  install(TARGETS mySharedLib DESTINATION /some/full/path)
+
+will install ``myExe`` to ``<prefix>/bin`` and ``myStaticLib`` to
+``<prefix>/lib/static``.  On non-DLL platforms ``mySharedLib`` will be
+installed to ``<prefix>/lib`` and ``/some/full/path``.  On DLL platforms
+the ``mySharedLib`` DLL will be installed to ``<prefix>/bin`` and
+``/some/full/path`` and its import library will be installed to
+``<prefix>/lib/static`` and ``/some/full/path``.
+
+The ``EXPORT`` option associates the installed target files with an
+export called ``<export-name>``.  It must appear before any ``RUNTIME``,
+``LIBRARY``, or ``ARCHIVE`` options.  To actually install the export
+file itself, call ``install(EXPORT)``, documented below.
+
+Installing a target with the :prop_tgt:`EXCLUDE_FROM_ALL` target property
+set to ``TRUE`` has undefined behavior.
+
+The install destination given to the target install ``DESTINATION`` may
+use "generator expressions" with the syntax ``$<...>``.  See the
+:manual:`cmake-generator-expressions(7)` manual for available expressions.
+
+Installing Files
+^^^^^^^^^^^^^^^^
+
+::
+
+  install(<FILES|PROGRAMS> files... DESTINATION <dir>
+          [PERMISSIONS permissions...]
+          [CONFIGURATIONS [Debug|Release|...]]
+          [COMPONENT <component>]
+          [RENAME <name>] [OPTIONAL] [EXCLUDE_FROM_ALL])
+
+The ``FILES`` form specifies rules for installing files for a project.
+File names given as relative paths are interpreted with respect to the
+current source directory.  Files installed by this form are by default
+given permissions ``OWNER_WRITE``, ``OWNER_READ``, ``GROUP_READ``, and
+``WORLD_READ`` if no ``PERMISSIONS`` argument is given.
+
+The ``PROGRAMS`` form is identical to the ``FILES`` form except that the
+default permissions for the installed file also include ``OWNER_EXECUTE``,
+``GROUP_EXECUTE``, and ``WORLD_EXECUTE``.  This form is intended to install
+programs that are not targets, such as shell scripts.  Use the ``TARGETS``
+form to install targets built within the project.
+
+The list of ``files...`` given to ``FILES`` or ``PROGRAMS`` may use
+"generator expressions" with the syntax ``$<...>``.  See the
+:manual:`cmake-generator-expressions(7)` manual for available expressions.
+However, if any item begins in a generator expression it must evaluate
+to a full path.
+
+The install destination given to the files install ``DESTINATION`` may
+use "generator expressions" with the syntax ``$<...>``.  See the
+:manual:`cmake-generator-expressions(7)` manual for available expressions.
+
+Installing Directories
+^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  install(DIRECTORY dirs... DESTINATION <dir>
+          [FILE_PERMISSIONS permissions...]
+          [DIRECTORY_PERMISSIONS permissions...]
+          [USE_SOURCE_PERMISSIONS] [OPTIONAL] [MESSAGE_NEVER]
+          [CONFIGURATIONS [Debug|Release|...]]
+          [COMPONENT <component>] [EXCLUDE_FROM_ALL]
+          [FILES_MATCHING]
+          [[PATTERN <pattern> | REGEX <regex>]
+           [EXCLUDE] [PERMISSIONS permissions...]] [...])
+
+The ``DIRECTORY`` form installs contents of one or more directories to a
+given destination.  The directory structure is copied verbatim to the
+destination.  The last component of each directory name is appended to
+the destination directory but a trailing slash may be used to avoid
+this because it leaves the last component empty.  Directory names
+given as relative paths are interpreted with respect to the current
+source directory.  If no input directory names are given the
+destination directory will be created but nothing will be installed
+into it.  The ``FILE_PERMISSIONS`` and ``DIRECTORY_PERMISSIONS`` options
+specify permissions given to files and directories in the destination.
+If ``USE_SOURCE_PERMISSIONS`` is specified and ``FILE_PERMISSIONS`` is not,
+file permissions will be copied from the source directory structure.
+If no permissions are specified files will be given the default
+permissions specified in the ``FILES`` form of the command, and the
+directories will be given the default permissions specified in the
+``PROGRAMS`` form of the command.
+
+The ``MESSAGE_NEVER`` option disables file installation status output.
+
+Installation of directories may be controlled with fine granularity
+using the ``PATTERN`` or ``REGEX`` options.  These "match" options specify a
+globbing pattern or regular expression to match directories or files
+encountered within input directories.  They may be used to apply
+certain options (see below) to a subset of the files and directories
+encountered.  The full path to each input file or directory (with
+forward slashes) is matched against the expression.  A ``PATTERN`` will
+match only complete file names: the portion of the full path matching
+the pattern must occur at the end of the file name and be preceded by
+a slash.  A ``REGEX`` will match any portion of the full path but it may
+use ``/`` and ``$`` to simulate the ``PATTERN`` behavior.  By default all
+files and directories are installed whether or not they are matched.
+The ``FILES_MATCHING`` option may be given before the first match option
+to disable installation of files (but not directories) not matched by
+any expression.  For example, the code
+
+.. code-block:: cmake
+
+  install(DIRECTORY src/ DESTINATION include/myproj
+          FILES_MATCHING PATTERN "*.h")
+
+will extract and install header files from a source tree.
+
+Some options may follow a ``PATTERN`` or ``REGEX`` expression and are applied
+only to files or directories matching them.  The ``EXCLUDE`` option will
+skip the matched file or directory.  The ``PERMISSIONS`` option overrides
+the permissions setting for the matched file or directory.  For
+example the code
+
+.. code-block:: cmake
+
+  install(DIRECTORY icons scripts/ DESTINATION share/myproj
+          PATTERN "CVS" EXCLUDE
+          PATTERN "scripts/*"
+          PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ
+                      GROUP_EXECUTE GROUP_READ)
+
+will install the ``icons`` directory to ``share/myproj/icons`` and the
+``scripts`` directory to ``share/myproj``.  The icons will get default
+file permissions, the scripts will be given specific permissions, and any
+``CVS`` directories will be excluded.
+
+The list of ``dirs...`` given to ``DIRECTORY`` and the install destination
+given to the directory install ``DESTINATION`` may use "generator expressions"
+with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.
+
+Custom Installation Logic
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  install([[SCRIPT <file>] [CODE <code>]]
+          [COMPONENT <component>] [EXCLUDE_FROM_ALL] [...])
+
+The ``SCRIPT`` form will invoke the given CMake script files during
+installation.  If the script file name is a relative path it will be
+interpreted with respect to the current source directory.  The ``CODE``
+form will invoke the given CMake code during installation.  Code is
+specified as a single argument inside a double-quoted string.  For
+example, the code
+
+.. code-block:: cmake
+
+  install(CODE "MESSAGE(\"Sample install message.\")")
+
+will print a message during installation.
+
+Installing Exports
+^^^^^^^^^^^^^^^^^^
+
+::
+
+  install(EXPORT <export-name> DESTINATION <dir>
+          [NAMESPACE <namespace>] [FILE <name>.cmake]
+          [PERMISSIONS permissions...]
+          [CONFIGURATIONS [Debug|Release|...]]
+          [EXPORT_LINK_INTERFACE_LIBRARIES]
+          [COMPONENT <component>]
+          [EXCLUDE_FROM_ALL])
+
+The ``EXPORT`` form generates and installs a CMake file containing code to
+import targets from the installation tree into another project.
+Target installations are associated with the export ``<export-name>``
+using the ``EXPORT`` option of the ``install(TARGETS)`` signature
+documented above.  The ``NAMESPACE`` option will prepend ``<namespace>`` to
+the target names as they are written to the import file.  By default
+the generated file will be called ``<export-name>.cmake`` but the ``FILE``
+option may be used to specify a different name.  The value given to
+the ``FILE`` option must be a file name with the ``.cmake`` extension.
+If a ``CONFIGURATIONS`` option is given then the file will only be installed
+when one of the named configurations is installed.  Additionally, the
+generated import file will reference only the matching target
+configurations.  The ``EXPORT_LINK_INTERFACE_LIBRARIES`` keyword, if
+present, causes the contents of the properties matching
+``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?`` to be exported, when
+policy :policy:`CMP0022` is ``NEW``.  If a ``COMPONENT`` option is
+specified that does not match that given to the targets associated with
+``<export-name>`` the behavior is undefined.  If a library target is
+included in the export but a target to which it links is not included
+the behavior is unspecified.
+
+The ``EXPORT`` form is useful to help outside projects use targets built
+and installed by the current project.  For example, the code
+
+.. code-block:: cmake
+
+  install(TARGETS myexe EXPORT myproj DESTINATION bin)
+  install(EXPORT myproj NAMESPACE mp_ DESTINATION lib/myproj)
+
+will install the executable myexe to ``<prefix>/bin`` and code to import
+it in the file ``<prefix>/lib/myproj/myproj.cmake``.  An outside project
+may load this file with the include command and reference the ``myexe``
+executable from the installation tree using the imported target name
+``mp_myexe`` as if the target were built in its own tree.
+
+.. note::
+  This command supercedes the :command:`install_targets` command and
+  the :prop_tgt:`PRE_INSTALL_SCRIPT` and :prop_tgt:`POST_INSTALL_SCRIPT`
+  target properties.  It also replaces the ``FILES`` forms of the
+  :command:`install_files` and :command:`install_programs` commands.
+  The processing order of these install rules relative to
+  those generated by :command:`install_targets`,
+  :command:`install_files`, and :command:`install_programs` commands
+  is not defined.
diff --git a/share/cmake-3.6/Help/command/install_files.rst b/share/cmake-3.6/Help/command/install_files.rst
new file mode 100644
index 0000000..1850be6
--- /dev/null
+++ b/share/cmake-3.6/Help/command/install_files.rst
@@ -0,0 +1,39 @@
+install_files
+-------------
+
+Deprecated.  Use the :command:`install(FILES)` command instead.
+
+This command has been superceded by the :command:`install` command.  It is
+provided for compatibility with older CMake code.  The ``FILES`` form is
+directly replaced by the ``FILES`` form of the :command:`install`
+command.  The regexp form can be expressed more clearly using the ``GLOB``
+form of the :command:`file` command.
+
+::
+
+  install_files(<dir> extension file file ...)
+
+Create rules to install the listed files with the given extension into
+the given directory.  Only files existing in the current source tree
+or its corresponding location in the binary tree may be listed.  If a
+file specified already has an extension, that extension will be
+removed first.  This is useful for providing lists of source files
+such as foo.cxx when you want the corresponding foo.h to be installed.
+A typical extension is '.h'.
+
+::
+
+  install_files(<dir> regexp)
+
+Any files in the current source directory that match the regular
+expression will be installed.
+
+::
+
+  install_files(<dir> FILES file file ...)
+
+Any files listed after the ``FILES`` keyword will be installed explicitly
+from the names given.  Full paths are allowed in this form.
+
+The directory ``<dir>`` is relative to the installation prefix, which is
+stored in the variable :variable:`CMAKE_INSTALL_PREFIX`.
diff --git a/share/cmake-3.6/Help/command/install_programs.rst b/share/cmake-3.6/Help/command/install_programs.rst
new file mode 100644
index 0000000..79aa486
--- /dev/null
+++ b/share/cmake-3.6/Help/command/install_programs.rst
@@ -0,0 +1,34 @@
+install_programs
+----------------
+
+Deprecated. Use the :command:`install(PROGRAMS)` command instead.
+
+This command has been superceded by the :command:`install` command.  It is
+provided for compatibility with older CMake code.  The ``FILES`` form is
+directly replaced by the ``PROGRAMS`` form of the :command:`install`
+command.  The regexp form can be expressed more clearly using the ``GLOB``
+form of the :command:`file` command.
+
+::
+
+  install_programs(<dir> file1 file2 [file3 ...])
+  install_programs(<dir> FILES file1 [file2 ...])
+
+Create rules to install the listed programs into the given directory.
+Use the ``FILES`` argument to guarantee that the file list version of the
+command will be used even when there is only one argument.
+
+::
+
+  install_programs(<dir> regexp)
+
+In the second form any program in the current source directory that
+matches the regular expression will be installed.
+
+This command is intended to install programs that are not built by
+cmake, such as shell scripts.  See the ``TARGETS`` form of the
+:command:`install` command to create installation rules for targets built
+by cmake.
+
+The directory ``<dir>`` is relative to the installation prefix, which is
+stored in the variable :variable:`CMAKE_INSTALL_PREFIX`.
diff --git a/share/cmake-3.6/Help/command/install_targets.rst b/share/cmake-3.6/Help/command/install_targets.rst
new file mode 100644
index 0000000..49ca696
--- /dev/null
+++ b/share/cmake-3.6/Help/command/install_targets.rst
@@ -0,0 +1,17 @@
+install_targets
+---------------
+
+Deprecated. Use the :command:`install(TARGETS)` command instead.
+
+This command has been superceded by the :command:`install` command.  It is
+provided for compatibility with older CMake code.
+
+::
+
+  install_targets(<dir> [RUNTIME_DIRECTORY dir] target target)
+
+Create rules to install the listed targets into the given directory.
+The directory ``<dir>`` is relative to the installation prefix, which is
+stored in the variable :variable:`CMAKE_INSTALL_PREFIX`.  If
+``RUNTIME_DIRECTORY`` is specified, then on systems with special runtime
+files (Windows DLL), the files will be copied to that directory.
diff --git a/share/cmake-3.6/Help/command/link_directories.rst b/share/cmake-3.6/Help/command/link_directories.rst
new file mode 100644
index 0000000..5c64bc6
--- /dev/null
+++ b/share/cmake-3.6/Help/command/link_directories.rst
@@ -0,0 +1,19 @@
+link_directories
+----------------
+
+Specify directories in which the linker will look for libraries.
+
+::
+
+  link_directories(directory1 directory2 ...)
+
+Specify the paths in which the linker should search for libraries.
+The command will apply only to targets created after it is called.
+Relative paths given to this command are interpreted as relative to
+the current source directory, see :policy:`CMP0015`.
+
+Note that this command is rarely necessary.  Library locations
+returned by :command:`find_package` and :command:`find_library` are
+absolute paths. Pass these absolute library file paths directly to the
+:command:`target_link_libraries` command.  CMake will ensure the linker finds
+them.
diff --git a/share/cmake-3.2/Help/command/link_libraries.rst b/share/cmake-3.6/Help/command/link_libraries.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/link_libraries.rst
rename to share/cmake-3.6/Help/command/link_libraries.rst
diff --git a/share/cmake-3.6/Help/command/list.rst b/share/cmake-3.6/Help/command/list.rst
new file mode 100644
index 0000000..f6b75bc
--- /dev/null
+++ b/share/cmake-3.6/Help/command/list.rst
@@ -0,0 +1,68 @@
+list
+----
+
+List operations.
+
+::
+
+  list(LENGTH <list> <output variable>)
+  list(GET <list> <element index> [<element index> ...]
+       <output variable>)
+  list(APPEND <list> [<element> ...])
+  list(FILTER <list> <INCLUDE|EXCLUDE> REGEX <regular_expression>)
+  list(FIND <list> <value> <output variable>)
+  list(INSERT <list> <element_index> <element> [<element> ...])
+  list(REMOVE_ITEM <list> <value> [<value> ...])
+  list(REMOVE_AT <list> <index> [<index> ...])
+  list(REMOVE_DUPLICATES <list>)
+  list(REVERSE <list>)
+  list(SORT <list>)
+
+``LENGTH`` will return a given list's length.
+
+``GET`` will return list of elements specified by indices from the list.
+
+``APPEND`` will append elements to the list.
+
+``FILTER`` will include or remove items from the list that match the
+mode's pattern.
+In ``REGEX`` mode, items will be matched against the given regular expression.
+For more information on regular expressions see also the :command:`string`
+command.
+
+``FIND`` will return the index of the element specified in the list or -1
+if it wasn't found.
+
+``INSERT`` will insert elements to the list to the specified location.
+
+``REMOVE_AT`` and ``REMOVE_ITEM`` will remove items from the list.  The
+difference is that ``REMOVE_ITEM`` will remove the given items, while
+``REMOVE_AT`` will remove the items at the given indices.
+
+``REMOVE_DUPLICATES`` will remove duplicated items in the list.
+
+``REVERSE`` reverses the contents of the list in-place.
+
+``SORT`` sorts the list in-place alphabetically.
+
+The list subcommands ``APPEND``, ``INSERT``, ``FILTER``, ``REMOVE_AT``,
+``REMOVE_ITEM``, ``REMOVE_DUPLICATES``, ``REVERSE`` and ``SORT`` may create new
+values for the list within the current CMake variable scope.  Similar to the
+:command:`set` command, the LIST command creates new variable values in the
+current scope, even if the list itself is actually defined in a parent
+scope.  To propagate the results of these operations upwards, use
+:command:`set` with ``PARENT_SCOPE``, :command:`set` with
+``CACHE INTERNAL``, or some other means of value propagation.
+
+NOTES: A list in cmake is a ``;`` separated group of strings.  To create a
+list the set command can be used.  For example, ``set(var a b c d e)``
+creates a list with ``a;b;c;d;e``, and ``set(var "a b c d e")`` creates a
+string or a list with one item in it.   (Note macro arguments are not
+variables, and therefore cannot be used in LIST commands.)
+
+When specifying index values, if ``<element index>`` is 0 or greater, it
+is indexed from the beginning of the list, with 0 representing the
+first list element.  If ``<element index>`` is -1 or lesser, it is indexed
+from the end of the list, with -1 representing the last list element.
+Be careful when counting with negative indices: they do not start from
+0.  -0 is equivalent to 0, the first list element.
diff --git a/share/cmake-3.6/Help/command/load_cache.rst b/share/cmake-3.6/Help/command/load_cache.rst
new file mode 100644
index 0000000..f113447
--- /dev/null
+++ b/share/cmake-3.6/Help/command/load_cache.rst
@@ -0,0 +1,27 @@
+load_cache
+----------
+
+Load in the values from another project's CMake cache.
+
+::
+
+  load_cache(pathToCacheFile READ_WITH_PREFIX
+             prefix entry1...)
+
+Read the cache and store the requested entries in variables with their
+name prefixed with the given prefix.  This only reads the values, and
+does not create entries in the local project's cache.
+
+::
+
+  load_cache(pathToCacheFile [EXCLUDE entry1...]
+             [INCLUDE_INTERNALS entry1...])
+
+Load in the values from another cache and store them in the local
+project's cache as internal entries.  This is useful for a project
+that depends on another project built in a different tree.  ``EXCLUDE``
+option can be used to provide a list of entries to be excluded.
+``INCLUDE_INTERNALS`` can be used to provide a list of internal entries to
+be included.  Normally, no internal entries are brought in.  Use of
+this form of the command is strongly discouraged, but it is provided
+for backward compatibility.
diff --git a/share/cmake-3.6/Help/command/load_command.rst b/share/cmake-3.6/Help/command/load_command.rst
new file mode 100644
index 0000000..a1576e8
--- /dev/null
+++ b/share/cmake-3.6/Help/command/load_command.rst
@@ -0,0 +1,23 @@
+load_command
+------------
+
+Disallowed.  See CMake Policy :policy:`CMP0031`.
+
+Load a command into a running CMake.
+
+::
+
+  load_command(COMMAND_NAME <loc1> [loc2 ...])
+
+The given locations are searched for a library whose name is
+cmCOMMAND_NAME.  If found, it is loaded as a module and the command is
+added to the set of available CMake commands.  Usually,
+:command:`try_compile` is used before this command to compile the
+module.  If the command is successfully loaded a variable named
+
+::
+
+  CMAKE_LOADED_COMMAND_<COMMAND_NAME>
+
+will be set to the full path of the module that was loaded.  Otherwise
+the variable will not be set.
diff --git a/share/cmake-3.6/Help/command/macro.rst b/share/cmake-3.6/Help/command/macro.rst
new file mode 100644
index 0000000..6bee69c
--- /dev/null
+++ b/share/cmake-3.6/Help/command/macro.rst
@@ -0,0 +1,76 @@
+macro
+-----
+
+Start recording a macro for later invocation as a command::
+
+  macro(<name> [arg1 [arg2 [arg3 ...]]])
+    COMMAND1(ARGS ...)
+    COMMAND2(ARGS ...)
+    ...
+  endmacro(<name>)
+
+Define a macro named ``<name>`` that takes arguments named ``arg1``,
+``arg2``, ``arg3``, (...).
+Commands listed after macro, but before the matching
+:command:`endmacro()`, are not invoked until the macro is invoked.
+When it is invoked, the commands recorded in the macro are first
+modified by replacing formal parameters (``${arg1}``) with the arguments
+passed, and then invoked as normal commands.
+In addition to referencing the formal parameters you can reference the
+values ``${ARGC}`` which will be set to the number of arguments passed
+into the function as well as ``${ARGV0}``, ``${ARGV1}``, ``${ARGV2}``,
+...  which will have the actual values of the arguments passed in.
+This facilitates creating macros with optional arguments.
+Additionally ``${ARGV}`` holds the list of all arguments given to the
+macro and ``${ARGN}`` holds the list of arguments past the last expected
+argument.
+Referencing to ``${ARGV#}`` arguments beyond ``${ARGC}`` have undefined
+behavior. Checking that ``${ARGC}`` is greater than ``#`` is the only
+way to ensure that ``${ARGV#}`` was passed to the function as an extra
+argument.
+
+See the :command:`cmake_policy()` command documentation for the behavior
+of policies inside macros.
+
+Macro Argument Caveats
+^^^^^^^^^^^^^^^^^^^^^^
+
+Note that the parameters to a macro and values such as ``ARGN`` are
+not variables in the usual CMake sense.  They are string
+replacements much like the C preprocessor would do with a macro.
+Therefore you will NOT be able to use commands like::
+
+ if(ARGV1) # ARGV1 is not a variable
+ if(DEFINED ARGV2) # ARGV2 is not a variable
+ if(ARGC GREATER 2) # ARGC is not a variable
+ foreach(loop_var IN LISTS ARGN) # ARGN is not a variable
+
+In the first case, you can use ``if(${ARGV1})``.
+In the second and third case, the proper way to check if an optional
+variable was passed to the macro is to use ``if(${ARGC} GREATER 2)``.
+In the last case, you can use ``foreach(loop_var ${ARGN})`` but this
+will skip empty arguments.
+If you need to include them, you can use::
+
+ set(list_var "${ARGN}")
+ foreach(loop_var IN LISTS list_var)
+
+Note that if you have a variable with the same name in the scope from
+which the macro is called, using unreferenced names will use the
+existing variable instead of the arguments. For example::
+
+ macro(_BAR)
+   foreach(arg IN LISTS ARGN)
+     [...]
+   endforeach()
+ endmacro()
+
+ function(_FOO)
+   _bar(x y z)
+ endfunction()
+
+ _foo(a b c)
+
+Will loop over ``a;b;c`` and not over ``x;y;z`` as one might be expecting.
+If you want true CMake variables and/or better CMake scope control you
+should look at the function command.
diff --git a/share/cmake-3.6/Help/command/make_directory.rst b/share/cmake-3.6/Help/command/make_directory.rst
new file mode 100644
index 0000000..27ecf51
--- /dev/null
+++ b/share/cmake-3.6/Help/command/make_directory.rst
@@ -0,0 +1,12 @@
+make_directory
+--------------
+
+Deprecated. Use the :command:`file(MAKE_DIRECTORY)` command instead.
+
+::
+
+  make_directory(directory)
+
+Creates the specified directory.  Full paths should be given.  Any
+parent directories that do not exist will also be created.  Use with
+care.
diff --git a/share/cmake-3.6/Help/command/mark_as_advanced.rst b/share/cmake-3.6/Help/command/mark_as_advanced.rst
new file mode 100644
index 0000000..c3f94fc
--- /dev/null
+++ b/share/cmake-3.6/Help/command/mark_as_advanced.rst
@@ -0,0 +1,19 @@
+mark_as_advanced
+----------------
+
+Mark cmake cached variables as advanced.
+
+::
+
+  mark_as_advanced([CLEAR|FORCE] VAR [VAR2 ...])
+
+Mark the named cached variables as advanced.  An advanced variable
+will not be displayed in any of the cmake GUIs unless the show
+advanced option is on.  If ``CLEAR`` is the first argument advanced
+variables are changed back to unadvanced.  If ``FORCE`` is the first
+argument, then the variable is made advanced.  If neither ``FORCE`` nor
+``CLEAR`` is specified, new values will be marked as advanced, but if the
+variable already has an advanced/non-advanced state, it will not be
+changed.
+
+It does nothing in script mode.
diff --git a/share/cmake-3.6/Help/command/math.rst b/share/cmake-3.6/Help/command/math.rst
new file mode 100644
index 0000000..d4deb16
--- /dev/null
+++ b/share/cmake-3.6/Help/command/math.rst
@@ -0,0 +1,13 @@
+math
+----
+
+Mathematical expressions.
+
+::
+
+  math(EXPR <output variable> <math expression>)
+
+``EXPR`` evaluates mathematical expression and returns result in the
+output variable.  Example mathematical expression is '5 * ( 10 + 13
+)'.  Supported operators are + - * / % | & ^ ~ << >> * / %.  They have
+the same meaning as they do in C code.
diff --git a/share/cmake-3.6/Help/command/message.rst b/share/cmake-3.6/Help/command/message.rst
new file mode 100644
index 0000000..04c62fd
--- /dev/null
+++ b/share/cmake-3.6/Help/command/message.rst
@@ -0,0 +1,33 @@
+message
+-------
+
+Display a message to the user.
+
+::
+
+  message([<mode>] "message to display" ...)
+
+The optional ``<mode>`` keyword determines the type of message:
+
+::
+
+  (none)         = Important information
+  STATUS         = Incidental information
+  WARNING        = CMake Warning, continue processing
+  AUTHOR_WARNING = CMake Warning (dev), continue processing
+  SEND_ERROR     = CMake Error, continue processing,
+                                but skip generation
+  FATAL_ERROR    = CMake Error, stop processing and generation
+  DEPRECATION    = CMake Deprecation Error or Warning if variable
+                   CMAKE_ERROR_DEPRECATED or CMAKE_WARN_DEPRECATED
+                   is enabled, respectively, else no message.
+
+The CMake command-line tool displays STATUS messages on stdout and all
+other message types on stderr.  The CMake GUI displays all messages in
+its log area.  The interactive dialogs (ccmake and CMakeSetup) show
+STATUS messages one at a time on a status line and other messages in
+interactive pop-up boxes.
+
+CMake Warning and Error message text displays using a simple markup
+language.  Non-indented text is formatted in line-wrapped paragraphs
+delimited by newlines.  Indented text is considered pre-formatted.
diff --git a/share/cmake-3.6/Help/command/option.rst b/share/cmake-3.6/Help/command/option.rst
new file mode 100644
index 0000000..91cd0a7
--- /dev/null
+++ b/share/cmake-3.6/Help/command/option.rst
@@ -0,0 +1,15 @@
+option
+------
+
+Provides an option that the user can optionally select.
+
+::
+
+  option(<option_variable> "help string describing option"
+         [initial value])
+
+Provide an option for the user to select as ``ON`` or ``OFF``.  If no
+initial value is provided, ``OFF`` is used.
+
+If you have options that depend on the values of other options, see
+the module help for :module:`CMakeDependentOption`.
diff --git a/share/cmake-3.2/Help/command/output_required_files.rst b/share/cmake-3.6/Help/command/output_required_files.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/output_required_files.rst
rename to share/cmake-3.6/Help/command/output_required_files.rst
diff --git a/share/cmake-3.6/Help/command/project.rst b/share/cmake-3.6/Help/command/project.rst
new file mode 100644
index 0000000..6c5ace7
--- /dev/null
+++ b/share/cmake-3.6/Help/command/project.rst
@@ -0,0 +1,64 @@
+project
+-------
+
+Set a name, version, and enable languages for the entire project.
+
+.. code-block:: cmake
+
+ project(<PROJECT-NAME> [LANGUAGES] [<language-name>...])
+ project(<PROJECT-NAME>
+         [VERSION <major>[.<minor>[.<patch>[.<tweak>]]]]
+         [LANGUAGES <language-name>...])
+
+Sets the name of the project and stores the name in the
+:variable:`PROJECT_NAME` variable.  Additionally this sets variables
+
+* :variable:`PROJECT_SOURCE_DIR`,
+  :variable:`<PROJECT-NAME>_SOURCE_DIR`
+* :variable:`PROJECT_BINARY_DIR`,
+  :variable:`<PROJECT-NAME>_BINARY_DIR`
+
+If ``VERSION`` is specified, given components must be non-negative integers.
+If ``VERSION`` is not specified, the default version is the empty string.
+The ``VERSION`` option may not be used unless policy :policy:`CMP0048` is
+set to ``NEW``.
+
+The :command:`project()` command stores the version number and its components
+in variables
+
+* :variable:`PROJECT_VERSION`,
+  :variable:`<PROJECT-NAME>_VERSION`
+* :variable:`PROJECT_VERSION_MAJOR`,
+  :variable:`<PROJECT-NAME>_VERSION_MAJOR`
+* :variable:`PROJECT_VERSION_MINOR`,
+  :variable:`<PROJECT-NAME>_VERSION_MINOR`
+* :variable:`PROJECT_VERSION_PATCH`,
+  :variable:`<PROJECT-NAME>_VERSION_PATCH`
+* :variable:`PROJECT_VERSION_TWEAK`,
+  :variable:`<PROJECT-NAME>_VERSION_TWEAK`
+
+Variables corresponding to unspecified versions are set to the empty string
+(if policy :policy:`CMP0048` is set to ``NEW``).
+
+Optionally you can specify which languages your project supports.
+Example languages are ``C``, ``CXX`` (i.e.  C++), ``Fortran``, etc.
+By default ``C`` and ``CXX`` are enabled if no language options are
+given.  Specify language ``NONE``, or use the ``LANGUAGES`` keyword
+and list no languages, to skip enabling any languages.
+
+If a variable exists called :variable:`CMAKE_PROJECT_<PROJECT-NAME>_INCLUDE`,
+the file pointed to by that variable will be included as the last step of the
+project command.
+
+The top-level ``CMakeLists.txt`` file for a project must contain a
+literal, direct call to the :command:`project` command; loading one
+through the :command:`include` command is not sufficient.  If no such
+call exists CMake will implicitly add one to the top that enables the
+default languages (``C`` and ``CXX``).
+
+.. note::
+  Call the :command:`cmake_minimum_required` command at the beginning
+  of the top-level ``CMakeLists.txt`` file even before calling the
+  ``project()`` command.  It is important to establish version and
+  policy settings before invoking other commands whose behavior they
+  may affect.  See also policy :policy:`CMP0000`.
diff --git a/share/cmake-3.6/Help/command/qt_wrap_cpp.rst b/share/cmake-3.6/Help/command/qt_wrap_cpp.rst
new file mode 100644
index 0000000..3843bf5
--- /dev/null
+++ b/share/cmake-3.6/Help/command/qt_wrap_cpp.rst
@@ -0,0 +1,12 @@
+qt_wrap_cpp
+-----------
+
+Create Qt Wrappers.
+
+::
+
+  qt_wrap_cpp(resultingLibraryName DestName
+              SourceLists ...)
+
+Produce moc files for all the .h files listed in the SourceLists.  The
+moc files will be added to the library using the ``DestName`` source list.
diff --git a/share/cmake-3.6/Help/command/qt_wrap_ui.rst b/share/cmake-3.6/Help/command/qt_wrap_ui.rst
new file mode 100644
index 0000000..f731ed9
--- /dev/null
+++ b/share/cmake-3.6/Help/command/qt_wrap_ui.rst
@@ -0,0 +1,14 @@
+qt_wrap_ui
+----------
+
+Create Qt user interfaces Wrappers.
+
+::
+
+  qt_wrap_ui(resultingLibraryName HeadersDestName
+             SourcesDestName SourceLists ...)
+
+Produce .h and .cxx files for all the .ui files listed in the
+``SourceLists``.  The .h files will be added to the library using the
+``HeadersDestNamesource`` list.  The .cxx files will be added to the
+library using the ``SourcesDestNamesource`` list.
diff --git a/share/cmake-3.6/Help/command/remove.rst b/share/cmake-3.6/Help/command/remove.rst
new file mode 100644
index 0000000..4628277
--- /dev/null
+++ b/share/cmake-3.6/Help/command/remove.rst
@@ -0,0 +1,12 @@
+remove
+------
+
+Deprecated. Use the :command:`list(REMOVE_ITEM)` command instead.
+
+::
+
+  remove(VAR VALUE VALUE ...)
+
+Removes ``VALUE`` from the variable ``VAR``.  This is typically used to
+remove entries from a vector (e.g.  semicolon separated list).  ``VALUE``
+is expanded.
diff --git a/share/cmake-3.6/Help/command/remove_definitions.rst b/share/cmake-3.6/Help/command/remove_definitions.rst
new file mode 100644
index 0000000..ea18918
--- /dev/null
+++ b/share/cmake-3.6/Help/command/remove_definitions.rst
@@ -0,0 +1,11 @@
+remove_definitions
+------------------
+
+Removes -D define flags added by :command:`add_definitions`.
+
+::
+
+  remove_definitions(-DFOO -DBAR ...)
+
+Removes flags (added by :command:`add_definitions`) from the compiler
+command line for sources in the current directory and below.
diff --git a/share/cmake-3.6/Help/command/return.rst b/share/cmake-3.6/Help/command/return.rst
new file mode 100644
index 0000000..e49fb3c
--- /dev/null
+++ b/share/cmake-3.6/Help/command/return.rst
@@ -0,0 +1,18 @@
+return
+------
+
+Return from a file, directory or function.
+
+::
+
+  return()
+
+Returns from a file, directory or function.  When this command is
+encountered in an included file (via :command:`include` or
+:command:`find_package`), it causes processing of the current file to stop
+and control is returned to the including file.  If it is encountered in a
+file which is not included by another file, e.g.  a ``CMakeLists.txt``,
+control is returned to the parent directory if there is one.  If return is
+called in a function, control is returned to the caller of the function.
+Note that a macro is not a function and does not handle return like a
+function does.
diff --git a/share/cmake-3.6/Help/command/separate_arguments.rst b/share/cmake-3.6/Help/command/separate_arguments.rst
new file mode 100644
index 0000000..0e3e5a5
--- /dev/null
+++ b/share/cmake-3.6/Help/command/separate_arguments.rst
@@ -0,0 +1,31 @@
+separate_arguments
+------------------
+
+Parse space-separated arguments into a semicolon-separated list.
+
+::
+
+  separate_arguments(<var> <UNIX|WINDOWS>_COMMAND "<args>")
+
+Parses a unix- or windows-style command-line string "<args>" and
+stores a semicolon-separated list of the arguments in ``<var>``.  The
+entire command line must be given in one "<args>" argument.
+
+The ``UNIX_COMMAND`` mode separates arguments by unquoted whitespace.  It
+recognizes both single-quote and double-quote pairs.  A backslash
+escapes the next literal character (\" is "); there are no special
+escapes (\n is just n).
+
+The ``WINDOWS_COMMAND`` mode parses a windows command-line using the same
+syntax the runtime library uses to construct argv at startup.  It
+separates arguments by whitespace that is not double-quoted.
+Backslashes are literal unless they precede double-quotes.  See the
+MSDN article "Parsing C Command-Line Arguments" for details.
+
+::
+
+  separate_arguments(VARIABLE)
+
+Convert the value of ``VARIABLE`` to a semi-colon separated list.  All
+spaces are replaced with ';'.  This helps with generating command
+lines.
diff --git a/share/cmake-3.6/Help/command/set.rst b/share/cmake-3.6/Help/command/set.rst
new file mode 100644
index 0000000..d04b880
--- /dev/null
+++ b/share/cmake-3.6/Help/command/set.rst
@@ -0,0 +1,89 @@
+set
+---
+
+Set a normal, cache, or environment variable to a given value.
+See the :ref:`cmake-language(7) variables <CMake Language Variables>`
+documentation for the scopes and interaction of normal variables
+and cache entries.
+
+Signatures of this command that specify a ``<value>...`` placeholder
+expect zero or more arguments.  Multiple arguments will be joined as
+a :ref:`;-list <CMake Language Lists>` to form the actual variable
+value to be set.  Zero arguments will cause normal variables to be
+unset.  See the :command:`unset` command to unset variables explicitly.
+
+Set Normal Variable
+^^^^^^^^^^^^^^^^^^^
+
+::
+
+  set(<variable> <value>... [PARENT_SCOPE])
+
+Set the given ``<variable>`` in the current function or directory scope.
+
+If the ``PARENT_SCOPE`` option is given the variable will be set in
+the scope above the current scope.  Each new directory or function
+creates a new scope.  This command will set the value of a variable
+into the parent directory or calling function (whichever is applicable
+to the case at hand).
+
+Set Cache Entry
+^^^^^^^^^^^^^^^
+
+::
+
+  set(<variable> <value>... CACHE <type> <docstring> [FORCE])
+
+Set the given cache ``<variable>`` (cache entry).  Since cache entries
+are meant to provide user-settable values this does not overwrite
+existing cache entries by default.  Use the ``FORCE`` option to
+overwrite existing entries.
+
+The ``<type>`` must be specified as one of:
+
+``BOOL``
+  Boolean ``ON/OFF`` value.  :manual:`cmake-gui(1)` offers a checkbox.
+
+``FILEPATH``
+  Path to a file on disk.  :manual:`cmake-gui(1)` offers a file dialog.
+
+``PATH``
+  Path to a directory on disk.  :manual:`cmake-gui(1)` offers a file dialog.
+
+``STRING``
+  A line of text.  :manual:`cmake-gui(1)` offers a text field or a
+  drop-down selection if the :prop_cache:`STRINGS` cache entry
+  property is set.
+
+``INTERNAL``
+  A line of text.  :manual:`cmake-gui(1)` does not show internal entries.
+  They may be used to store variables persistently across runs.
+  Use of this type implies ``FORCE``.
+
+The ``<docstring>`` must be specified as a line of text providing
+a quick summary of the option for presentation to :manual:`cmake-gui(1)`
+users.
+
+If the cache entry does not exist prior to the call or the ``FORCE``
+option is given then the cache entry will be set to the given value.
+Furthermore, any normal variable binding in the current scope will
+be removed to expose the newly cached value to any immediately
+following evaluation.
+
+It is possible for the cache entry to exist prior to the call but
+have no type set if it was created on the :manual:`cmake(1)` command
+line by a user through the ``-D<var>=<value>`` option without
+specifying a type.  In this case the ``set`` command will add the
+type.  Furthermore, if the ``<type>`` is ``PATH`` or ``FILEPATH``
+and the ``<value>`` provided on the command line is a relative path,
+then the ``set`` command will treat the path as relative to the
+current working directory and convert it to an absolute path.
+
+Set Environment Variable
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  set(ENV{<variable>} <value>...)
+
+Set the current process environment ``<variable>`` to the given value.
diff --git a/share/cmake-3.6/Help/command/set_directory_properties.rst b/share/cmake-3.6/Help/command/set_directory_properties.rst
new file mode 100644
index 0000000..e485fce
--- /dev/null
+++ b/share/cmake-3.6/Help/command/set_directory_properties.rst
@@ -0,0 +1,12 @@
+set_directory_properties
+------------------------
+
+Set a property of the directory.
+
+::
+
+  set_directory_properties(PROPERTIES prop1 value1 prop2 value2)
+
+Set a property for the current directory and subdirectories. See
+:ref:`Directory Properties` for the list of properties known
+to CMake.
diff --git a/share/cmake-3.6/Help/command/set_property.rst b/share/cmake-3.6/Help/command/set_property.rst
new file mode 100644
index 0000000..5ed788e
--- /dev/null
+++ b/share/cmake-3.6/Help/command/set_property.rst
@@ -0,0 +1,69 @@
+set_property
+------------
+
+Set a named property in a given scope.
+
+::
+
+  set_property(<GLOBAL                            |
+                DIRECTORY [dir]                   |
+                TARGET    [target1 [target2 ...]] |
+                SOURCE    [src1 [src2 ...]]       |
+                INSTALL   [file1 [file2 ...]]     |
+                TEST      [test1 [test2 ...]]     |
+                CACHE     [entry1 [entry2 ...]]>
+               [APPEND] [APPEND_STRING]
+               PROPERTY <name> [value1 [value2 ...]])
+
+Set one property on zero or more objects of a scope.  The first
+argument determines the scope in which the property is set.  It must
+be one of the following:
+
+``GLOBAL``
+  Scope is unique and does not accept a name.
+
+``DIRECTORY``
+  Scope defaults to the current directory but another
+  directory (already processed by CMake) may be named by full or
+  relative path.
+
+``TARGET``
+  Scope may name zero or more existing targets.
+
+``SOURCE``
+  Scope may name zero or more source files.  Note that source
+  file properties are visible only to targets added in the same
+  directory (CMakeLists.txt).
+
+``INSTALL``
+  Scope may name zero or more installed file paths.
+  These are made available to CPack to influence deployment.
+
+  Both the property key and value may use generator expressions.
+  Specific properties may apply to installed files and/or directories.
+
+  Path components have to be separated by forward slashes,
+  must be normalized and are case sensitive.
+
+  To reference the installation prefix itself with a relative path use ".".
+
+  Currently installed file properties are only defined for
+  the WIX generator where the given paths are relative
+  to the installation prefix.
+
+``TEST``
+  Scope may name zero or more existing tests.
+
+``CACHE``
+  Scope must name zero or more cache existing entries.
+
+The required ``PROPERTY`` option is immediately followed by the name of
+the property to set.  Remaining arguments are used to compose the
+property value in the form of a semicolon-separated list.  If the
+``APPEND`` option is given the list is appended to any existing property
+value.  If the ``APPEND_STRING`` option is given the string is append to any
+existing property value as string, i.e.  it results in a longer string
+and not a list of strings.
+
+See the :manual:`cmake-properties(7)` manual for a list of properties
+in each scope.
diff --git a/share/cmake-3.6/Help/command/set_source_files_properties.rst b/share/cmake-3.6/Help/command/set_source_files_properties.rst
new file mode 100644
index 0000000..b4904e8
--- /dev/null
+++ b/share/cmake-3.6/Help/command/set_source_files_properties.rst
@@ -0,0 +1,15 @@
+set_source_files_properties
+---------------------------
+
+Source files can have properties that affect how they are built.
+
+::
+
+  set_source_files_properties([file1 [file2 [...]]]
+                              PROPERTIES prop1 value1
+                              [prop2 value2 [...]])
+
+Set properties associated with source files using a key/value paired
+list.  See :ref:`Source File Properties` for the list of properties known
+to CMake.  Source file properties are visible only to targets added
+in the same directory (CMakeLists.txt).
diff --git a/share/cmake-3.6/Help/command/set_target_properties.rst b/share/cmake-3.6/Help/command/set_target_properties.rst
new file mode 100644
index 0000000..b894eac
--- /dev/null
+++ b/share/cmake-3.6/Help/command/set_target_properties.rst
@@ -0,0 +1,18 @@
+set_target_properties
+---------------------
+
+Targets can have properties that affect how they are built.
+
+::
+
+  set_target_properties(target1 target2 ...
+                        PROPERTIES prop1 value1
+                        prop2 value2 ...)
+
+Set properties on a target.  The syntax for the command is to list all
+the files you want to change, and then provide the values you want to
+set next.  You can use any prop value pair you want and extract it
+later with the :command:`get_property` or :command:`get_target_property`
+command.
+
+See :ref:`Target Properties` for the list of properties known to CMake.
diff --git a/share/cmake-3.6/Help/command/set_tests_properties.rst b/share/cmake-3.6/Help/command/set_tests_properties.rst
new file mode 100644
index 0000000..3efb165
--- /dev/null
+++ b/share/cmake-3.6/Help/command/set_tests_properties.rst
@@ -0,0 +1,14 @@
+set_tests_properties
+--------------------
+
+Set a property of the tests.
+
+::
+
+  set_tests_properties(test1 [test2...] PROPERTIES prop1 value1 prop2 value2)
+
+Set a property for the tests.  If the test is not found, CMake
+will report an error.
+:manual:`Generator expressions <cmake-generator-expressions(7)>` will be
+expanded the same as supported by the test's :command:`add_test` call.  See
+:ref:`Test Properties` for the list of properties known to CMake.
diff --git a/share/cmake-3.2/Help/command/site_name.rst b/share/cmake-3.6/Help/command/site_name.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/site_name.rst
rename to share/cmake-3.6/Help/command/site_name.rst
diff --git a/share/cmake-3.2/Help/command/source_group.rst b/share/cmake-3.6/Help/command/source_group.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/source_group.rst
rename to share/cmake-3.6/Help/command/source_group.rst
diff --git a/share/cmake-3.6/Help/command/string.rst b/share/cmake-3.6/Help/command/string.rst
new file mode 100644
index 0000000..3f4050e
--- /dev/null
+++ b/share/cmake-3.6/Help/command/string.rst
@@ -0,0 +1,321 @@
+string
+------
+
+.. only:: html
+
+   .. contents::
+
+String operations.
+
+Search and Replace
+^^^^^^^^^^^^^^^^^^
+
+FIND
+""""
+
+::
+
+  string(FIND <string> <substring> <output variable> [REVERSE])
+
+Return the position where the given substring was found in
+the supplied string.  If the ``REVERSE`` flag was used, the command will
+search for the position of the last occurrence of the specified
+substring.  If the substring is not found, a position of -1 is returned.
+
+REPLACE
+"""""""
+
+::
+
+  string(REPLACE <match_string>
+         <replace_string> <output variable>
+         <input> [<input>...])
+
+Replace all occurrences of ``match_string`` in the input
+with ``replace_string`` and store the result in the output.
+
+Regular Expressions
+^^^^^^^^^^^^^^^^^^^
+
+REGEX MATCH
+"""""""""""
+
+::
+
+  string(REGEX MATCH <regular_expression>
+         <output variable> <input> [<input>...])
+
+Match the regular expression once and store the match in the output variable.
+All ``<input>`` arguments are concatenated before matching.
+
+REGEX MATCHALL
+""""""""""""""
+
+::
+
+  string(REGEX MATCHALL <regular_expression>
+         <output variable> <input> [<input>...])
+
+Match the regular expression as many times as possible and store the matches
+in the output variable as a list.
+All ``<input>`` arguments are concatenated before matching.
+
+REGEX REPLACE
+"""""""""""""
+
+::
+
+  string(REGEX REPLACE <regular_expression>
+         <replace_expression> <output variable>
+         <input> [<input>...])
+
+Match the regular expression as many times as possible and substitute the
+replacement expression for the match in the output.
+All ``<input>`` arguments are concatenated before matching.
+
+The replace expression may refer to paren-delimited subexpressions of the
+match using ``\1``, ``\2``, ..., ``\9``.  Note that two backslashes (``\\1``)
+are required in CMake code to get a backslash through argument parsing.
+
+Regex Specification
+"""""""""""""""""""
+
+The following characters have special meaning in regular expressions:
+
+::
+
+   ^         Matches at beginning of input
+   $         Matches at end of input
+   .         Matches any single character
+   [ ]       Matches any character(s) inside the brackets
+   [^ ]      Matches any character(s) not inside the brackets
+    -        Inside brackets, specifies an inclusive range between
+             characters on either side e.g. [a-f] is [abcdef]
+             To match a literal - using brackets, make it the first
+             or the last character e.g. [+*/-] matches basic
+             mathematical operators.
+   *         Matches preceding pattern zero or more times
+   +         Matches preceding pattern one or more times
+   ?         Matches preceding pattern zero or once only
+   |         Matches a pattern on either side of the |
+   ()        Saves a matched subexpression, which can be referenced
+             in the REGEX REPLACE operation. Additionally it is saved
+             by all regular expression-related commands, including
+             e.g. if( MATCHES ), in the variables CMAKE_MATCH_(0..9).
+
+``*``, ``+`` and ``?`` have higher precedence than concatenation.  ``|``
+has lower precedence than concatenation.  This means that the regular
+expression ``^ab+d$`` matches ``abbd`` but not ``ababd``, and the regular
+expression ``^(ab|cd)$`` matches ``ab`` but not ``abd``.
+
+Manipulation
+^^^^^^^^^^^^
+
+APPEND
+""""""
+
+::
+
+  string(APPEND <string variable> [<input>...])
+
+Append all the input arguments to the string.
+
+CONCAT
+""""""
+
+::
+
+  string(CONCAT <output variable> [<input>...])
+
+Concatenate all the input arguments together and store
+the result in the named output variable.
+
+TOLOWER
+"""""""
+
+::
+
+  string(TOLOWER <string1> <output variable>)
+
+Convert string to lower characters.
+
+TOUPPER
+"""""""
+
+::
+
+  string(TOUPPER <string1> <output variable>)
+
+Convert string to upper characters.
+
+LENGTH
+""""""
+
+::
+
+  string(LENGTH <string> <output variable>)
+
+Store in an output variable a given string's length.
+
+SUBSTRING
+"""""""""
+
+::
+
+  string(SUBSTRING <string> <begin> <length> <output variable>)
+
+Store in an output variable a substring of a given string.  If length is
+``-1`` the remainder of the string starting at begin will be returned.
+If string is shorter than length then end of string is used instead.
+
+.. note::
+  CMake 3.1 and below reported an error if length pointed past
+  the end of string.
+
+STRIP
+"""""
+
+::
+
+  string(STRIP <string> <output variable>)
+
+Store in an output variable a substring of a given string with leading and
+trailing spaces removed.
+
+GENEX_STRIP
+"""""""""""
+
+::
+
+  string(GENEX_STRIP <input string> <output variable>)
+
+Strip any :manual:`generator expressions <cmake-generator-expressions(7)>`
+from the ``input string`` and store the result in the ``output variable``.
+
+Comparison
+^^^^^^^^^^
+
+::
+
+  string(COMPARE EQUAL <string1> <string2> <output variable>)
+  string(COMPARE NOTEQUAL <string1> <string2> <output variable>)
+  string(COMPARE LESS <string1> <string2> <output variable>)
+  string(COMPARE GREATER <string1> <string2> <output variable>)
+
+Compare the strings and store true or false in the output variable.
+
+Hashing
+^^^^^^^
+
+::
+
+  string(<MD5|SHA1|SHA224|SHA256|SHA384|SHA512>
+         <output variable> <input>)
+
+Compute a cryptographic hash of the input string.
+
+Generation
+^^^^^^^^^^
+
+ASCII
+"""""
+
+::
+
+  string(ASCII <number> [<number> ...] <output variable>)
+
+Convert all numbers into corresponding ASCII characters.
+
+CONFIGURE
+"""""""""
+
+::
+
+  string(CONFIGURE <string1> <output variable>
+         [@ONLY] [ESCAPE_QUOTES])
+
+Transform a string like :command:`configure_file` transforms a file.
+
+RANDOM
+""""""
+
+::
+
+  string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>]
+         [RANDOM_SEED <seed>] <output variable>)
+
+Return a random string of given length consisting of
+characters from the given alphabet.  Default length is 5 characters
+and default alphabet is all numbers and upper and lower case letters.
+If an integer ``RANDOM_SEED`` is given, its value will be used to seed the
+random number generator.
+
+TIMESTAMP
+"""""""""
+
+::
+
+  string(TIMESTAMP <output variable> [<format string>] [UTC])
+
+Write a string representation of the current date
+and/or time to the output variable.
+
+Should the command be unable to obtain a timestamp the output variable
+will be set to the empty string "".
+
+The optional ``UTC`` flag requests the current date/time representation to
+be in Coordinated Universal Time (UTC) rather than local time.
+
+The optional ``<format string>`` may contain the following format
+specifiers:
+
+::
+
+   %d        The day of the current month (01-31).
+   %H        The hour on a 24-hour clock (00-23).
+   %I        The hour on a 12-hour clock (01-12).
+   %j        The day of the current year (001-366).
+   %m        The month of the current year (01-12).
+   %M        The minute of the current hour (00-59).
+   %s        Seconds since midnight (UTC) 1-Jan-1970 (UNIX time).
+   %S        The second of the current minute.
+             60 represents a leap second. (00-60)
+   %U        The week number of the current year (00-53).
+   %w        The day of the current week. 0 is Sunday. (0-6)
+   %y        The last two digits of the current year (00-99)
+   %Y        The current year.
+
+Unknown format specifiers will be ignored and copied to the output
+as-is.
+
+If no explicit ``<format string>`` is given it will default to:
+
+::
+
+   %Y-%m-%dT%H:%M:%S    for local time.
+   %Y-%m-%dT%H:%M:%SZ   for UTC.
+
+
+::
+
+  string(MAKE_C_IDENTIFIER <input string> <output variable>)
+
+Write a string which can be used as an identifier in C.
+
+UUID
+""""
+
+::
+
+  string(UUID <output variable> NAMESPACE <namespace> NAME <name>
+         TYPE <MD5|SHA1> [UPPER])
+
+Create a univerally unique identifier (aka GUID) as per RFC4122
+based on the hash of the combined values of ``<namespace>``
+(which itself has to be a valid UUID) and ``<name>``.
+The hash algorithm can be either ``MD5`` (Version 3 UUID) or
+``SHA1`` (Version 5 UUID).
+A UUID has the format ``xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx``
+where each `x` represents a lower case hexadecimal character.
+Where required an uppercase representation can be requested
+with the optional ``UPPER`` flag.
diff --git a/share/cmake-3.2/Help/command/subdir_depends.rst b/share/cmake-3.6/Help/command/subdir_depends.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/subdir_depends.rst
rename to share/cmake-3.6/Help/command/subdir_depends.rst
diff --git a/share/cmake-3.6/Help/command/subdirs.rst b/share/cmake-3.6/Help/command/subdirs.rst
new file mode 100644
index 0000000..43b87d4
--- /dev/null
+++ b/share/cmake-3.6/Help/command/subdirs.rst
@@ -0,0 +1,24 @@
+subdirs
+-------
+
+Deprecated. Use the :command:`add_subdirectory` command instead.
+
+Add a list of subdirectories to the build.
+
+::
+
+  subdirs(dir1 dir2 ...[EXCLUDE_FROM_ALL exclude_dir1 exclude_dir2 ...]
+          [PREORDER] )
+
+Add a list of subdirectories to the build.  The :command:`add_subdirectory`
+command should be used instead of ``subdirs`` although ``subdirs`` will still
+work.  This will cause any CMakeLists.txt files in the sub directories
+to be processed by CMake.  Any directories after the ``PREORDER`` flag are
+traversed first by makefile builds, the ``PREORDER`` flag has no effect on
+IDE projects.  Any directories after the ``EXCLUDE_FROM_ALL`` marker will
+not be included in the top level makefile or project file.  This is
+useful for having CMake create makefiles or projects for a set of
+examples in a project.  You would want CMake to generate makefiles or
+project files for all the examples at the same time, but you would not
+want them to show up in the top level project or be built each time
+make is run from the top.
diff --git a/share/cmake-3.6/Help/command/target_compile_definitions.rst b/share/cmake-3.6/Help/command/target_compile_definitions.rst
new file mode 100644
index 0000000..8bd3233
--- /dev/null
+++ b/share/cmake-3.6/Help/command/target_compile_definitions.rst
@@ -0,0 +1,28 @@
+target_compile_definitions
+--------------------------
+
+Add compile definitions to a target.
+
+::
+
+  target_compile_definitions(<target>
+    <INTERFACE|PUBLIC|PRIVATE> [items1...]
+    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
+
+Specify compile definitions to use when compiling a given ``<target>``.  The
+named ``<target>`` must have been created by a command such as
+:command:`add_executable` or :command:`add_library` and must not be an
+:ref:`Imported Target <Imported Targets>`.
+
+The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
+specify the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC``
+items will populate the :prop_tgt:`COMPILE_DEFINITIONS` property of
+``<target>``. ``PUBLIC`` and ``INTERFACE`` items will populate the
+:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS` property of ``<target>``.  The
+following arguments specify compile definitions.  Repeated calls for the
+same ``<target>`` append items in the order called.
+
+Arguments to ``target_compile_definitions`` may use "generator expressions"
+with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.6/Help/command/target_compile_features.rst b/share/cmake-3.6/Help/command/target_compile_features.rst
new file mode 100644
index 0000000..b66a4ec
--- /dev/null
+++ b/share/cmake-3.6/Help/command/target_compile_features.rst
@@ -0,0 +1,32 @@
+target_compile_features
+-----------------------
+
+Add expected compiler features to a target.
+
+::
+
+  target_compile_features(<target> <PRIVATE|PUBLIC|INTERFACE> <feature> [...])
+
+Specify compiler features required when compiling a given target.  If the
+feature is not listed in the :variable:`CMAKE_C_COMPILE_FEATURES` variable
+or :variable:`CMAKE_CXX_COMPILE_FEATURES` variable,
+then an error will be reported by CMake.  If the use of the feature requires
+an additional compiler flag, such as ``-std=gnu++11``, the flag will be added
+automatically.
+
+The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
+specify the scope of the features.  ``PRIVATE`` and ``PUBLIC`` items will
+populate the :prop_tgt:`COMPILE_FEATURES` property of ``<target>``.
+``PUBLIC`` and ``INTERFACE`` items will populate the
+:prop_tgt:`INTERFACE_COMPILE_FEATURES` property of ``<target>``.  Repeated
+calls for the same ``<target>`` append items.
+
+The named ``<target>`` must have been created by a command such as
+:command:`add_executable` or :command:`add_library` and must not be
+an ``IMPORTED`` target.
+
+Arguments to ``target_compile_features`` may use "generator expressions"
+with the syntax ``$<...>``.
+See the :manual:`cmake-generator-expressions(7)` manual for available
+expressions.  See the :manual:`cmake-compile-features(7)` manual for
+information on compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/command/target_compile_options.rst b/share/cmake-3.6/Help/command/target_compile_options.rst
new file mode 100644
index 0000000..73e01e7
--- /dev/null
+++ b/share/cmake-3.6/Help/command/target_compile_options.rst
@@ -0,0 +1,37 @@
+target_compile_options
+----------------------
+
+Add compile options to a target.
+
+::
+
+  target_compile_options(<target> [BEFORE]
+    <INTERFACE|PUBLIC|PRIVATE> [items1...]
+    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
+
+Specify compile options to use when compiling a given target.  The
+named ``<target>`` must have been created by a command such as
+:command:`add_executable` or :command:`add_library` and must not be an
+:ref:`IMPORTED Target <Imported Targets>`.  If ``BEFORE`` is specified,
+the content will be prepended to the property instead of being appended.
+
+This command can be used to add any options, but
+alternative commands exist to add preprocessor definitions
+(:command:`target_compile_definitions` and :command:`add_definitions`) or
+include directories (:command:`target_include_directories` and
+:command:`include_directories`).  See documentation of the
+:prop_dir:`directory <COMPILE_OPTIONS>` and
+:prop_tgt:`target <COMPILE_OPTIONS>` ``COMPILE_OPTIONS`` properties.
+
+The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
+specify the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC``
+items will populate the :prop_tgt:`COMPILE_OPTIONS` property of
+``<target>``.  ``PUBLIC`` and ``INTERFACE`` items will populate the
+:prop_tgt:`INTERFACE_COMPILE_OPTIONS` property of ``<target>``.  The
+following arguments specify compile options.  Repeated calls for the same
+``<target>`` append items in the order called.
+
+Arguments to ``target_compile_options`` may use "generator expressions"
+with the syntax ``$<...>``. See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.6/Help/command/target_include_directories.rst b/share/cmake-3.6/Help/command/target_include_directories.rst
new file mode 100644
index 0000000..30ec2cb
--- /dev/null
+++ b/share/cmake-3.6/Help/command/target_include_directories.rst
@@ -0,0 +1,62 @@
+target_include_directories
+--------------------------
+
+Add include directories to a target.
+
+::
+
+  target_include_directories(<target> [SYSTEM] [BEFORE]
+    <INTERFACE|PUBLIC|PRIVATE> [items1...]
+    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
+
+Specify include directories to use when compiling a given target.
+The named ``<target>`` must have been created by a command such
+as :command:`add_executable` or :command:`add_library` and must not be an
+:prop_tgt:`IMPORTED` target.
+
+If ``BEFORE`` is specified, the content will be prepended to the property
+instead of being appended.
+
+The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to specify
+the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC`` items will
+populate the :prop_tgt:`INCLUDE_DIRECTORIES` property of ``<target>``.
+``PUBLIC`` and ``INTERFACE`` items will populate the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`
+property of ``<target>``.  The following arguments specify include
+directories.
+
+Specified include directories may be absolute paths or relative paths.
+Repeated calls for the same <target> append items in the order called.  If
+``SYSTEM`` is specified, the compiler will be told the
+directories are meant as system include directories on some platforms
+(signalling this setting might achieve effects such as the compiler
+skipping warnings, or these fixed-install system files not being
+considered in dependency calculations - see compiler docs).  If ``SYSTEM``
+is used together with ``PUBLIC`` or ``INTERFACE``, the
+:prop_tgt:`INTERFACE_SYSTEM_INCLUDE_DIRECTORIES` target property will be
+populated with the specified directories.
+
+Arguments to ``target_include_directories`` may use "generator expressions"
+with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
+
+Include directories usage requirements commonly differ between the build-tree
+and the install-tree.  The ``BUILD_INTERFACE`` and ``INSTALL_INTERFACE``
+generator expressions can be used to describe separate usage requirements
+based on the usage location.  Relative paths are allowed within the
+``INSTALL_INTERFACE`` expression and are interpreted relative to the
+installation prefix.  For example:
+
+.. code-block:: cmake
+
+  target_include_directories(mylib PUBLIC
+    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include/mylib>
+    $<INSTALL_INTERFACE:include/mylib>  # <prefix>/include/mylib
+  )
+
+Creating Relocatable Packages
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. |INTERFACE_PROPERTY_LINK| replace:: :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`
+.. include:: /include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
diff --git a/share/cmake-3.6/Help/command/target_link_libraries.rst b/share/cmake-3.6/Help/command/target_link_libraries.rst
new file mode 100644
index 0000000..d903d05
--- /dev/null
+++ b/share/cmake-3.6/Help/command/target_link_libraries.rst
@@ -0,0 +1,204 @@
+target_link_libraries
+---------------------
+
+.. only:: html
+
+   .. contents::
+
+Specify libraries or flags to use when linking a given target and/or
+its dependents.  :ref:`Usage requirements <Target Usage Requirements>`
+from linked library targets will be propagated.  Usage requirements
+of a target's dependencies affect compilation of its own sources.
+
+Overview
+^^^^^^^^
+
+This command has several signatures as detailed in subsections below.
+All of them have the general form::
+
+  target_link_libraries(<target> ... <item>... ...)
+
+The named ``<target>`` must have been created in the current directory by
+a command such as :command:`add_executable` or :command:`add_library`.
+Repeated calls for the same ``<target>`` append items in the order called.
+Each ``<item>`` may be:
+
+* **A library target name**: The generated link line will have the
+  full path to the linkable library file associated with the target.
+  The buildsystem will have a dependency to re-link ``<target>`` if
+  the library file changes.
+
+  The named target must be created by :command:`add_library` within
+  the project or as an :ref:`IMPORTED library <Imported Targets>`.
+  If it is created within the project an ordering dependency will
+  automatically be added in the build system to make sure the named
+  library target is up-to-date before the ``<target>`` links.
+
+  If an imported library has the :prop_tgt:`IMPORTED_NO_SONAME`
+  target property set, CMake may ask the linker to search for
+  the library instead of using the full path
+  (e.g. ``/usr/lib/libfoo.so`` becomes ``-lfoo``).
+
+* **A full path to a library file**: The generated link line will
+  normally preserve the full path to the file. The buildsystem will
+  have a dependency to re-link ``<target>`` if the library file changes.
+
+  There are some cases where CMake may ask the linker to search for
+  the library (e.g. ``/usr/lib/libfoo.so`` becomes ``-lfoo``), such
+  as when a shared library is detected to have no ``SONAME`` field.
+  See policy :policy:`CMP0060` for discussion of another case.
+
+  If the library file is in a Mac OSX framework, the ``Headers`` directory
+  of the framework will also be processed as a
+  :ref:`usage requirement <Target Usage Requirements>`.  This has the same
+  effect as passing the framework directory as an include directory.
+
+* **A plain library name**: The generated link line will ask the linker
+  to search for the library (e.g. ``foo`` becomes ``-lfoo`` or ``foo.lib``).
+
+* **A link flag**: Item names starting with ``-``, but not ``-l`` or
+  ``-framework``, are treated as linker flags.  Note that such flags will
+  be treated like any other library link item for purposes of transitive
+  dependencies, so they are generally safe to specify only as private link
+  items that will not propagate to dependents.
+
+* A ``debug``, ``optimized``, or ``general`` keyword immediately followed
+  by another ``<item>``.  The item following such a keyword will be used
+  only for the corresponding build configuration.  The ``debug`` keyword
+  corresponds to the ``Debug`` configuration (or to configurations named
+  in the :prop_gbl:`DEBUG_CONFIGURATIONS` global property if it is set).
+  The ``optimized`` keyword corresponds to all other configurations.  The
+  ``general`` keyword corresponds to all configurations, and is purely
+  optional.  Higher granularity may be achieved for per-configuration
+  rules by creating and linking to
+  :ref:`IMPORTED library targets <Imported Targets>`.
+
+Items containing ``::``, such as ``Foo::Bar``, are assumed to be
+:ref:`IMPORTED <Imported Targets>` or :ref:`ALIAS <Alias Targets>` library
+target names and will cause an error if no such target exists.
+See policy :policy:`CMP0028`.
+
+Arguments to ``target_link_libraries`` may use "generator expressions"
+with the syntax ``$<...>``.  Note however, that generator expressions
+will not be used in OLD handling of :policy:`CMP0003` or :policy:`CMP0004`.
+See the :manual:`cmake-generator-expressions(7)` manual for available
+expressions.  See the :manual:`cmake-buildsystem(7)` manual for more on
+defining buildsystem properties.
+
+Libraries for a Target and/or its Dependents
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  target_link_libraries(<target>
+                        <PRIVATE|PUBLIC|INTERFACE> <item>...
+                       [<PRIVATE|PUBLIC|INTERFACE> <item>...]...)
+
+The ``PUBLIC``, ``PRIVATE`` and ``INTERFACE`` keywords can be used to
+specify both the link dependencies and the link interface in one command.
+Libraries and targets following ``PUBLIC`` are linked to, and are made
+part of the link interface.  Libraries and targets following ``PRIVATE``
+are linked to, but are not made part of the link interface.  Libraries
+following ``INTERFACE`` are appended to the link interface and are not
+used for linking ``<target>``.
+
+Libraries for both a Target and its Dependents
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  target_link_libraries(<target> <item>...)
+
+Library dependencies are transitive by default with this signature.
+When this target is linked into another target then the libraries
+linked to this target will appear on the link line for the other
+target too.  This transitive "link interface" is stored in the
+:prop_tgt:`INTERFACE_LINK_LIBRARIES` target property and may be overridden
+by setting the property directly.  When :policy:`CMP0022` is not set to
+``NEW``, transitive linking is built in but may be overridden by the
+:prop_tgt:`LINK_INTERFACE_LIBRARIES` property.  Calls to other signatures
+of this command may set the property making any libraries linked
+exclusively by this signature private.
+
+Libraries for a Target and/or its Dependents (Legacy)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  target_link_libraries(<target>
+                        <LINK_PRIVATE|LINK_PUBLIC> <lib>...
+                       [<LINK_PRIVATE|LINK_PUBLIC> <lib>...]...)
+
+The ``LINK_PUBLIC`` and ``LINK_PRIVATE`` modes can be used to specify both
+the link dependencies and the link interface in one command.
+
+This signature is for compatibility only.  Prefer the ``PUBLIC`` or
+``PRIVATE`` keywords instead.
+
+Libraries and targets following ``LINK_PUBLIC`` are linked to, and are
+made part of the :prop_tgt:`INTERFACE_LINK_LIBRARIES`.  If policy
+:policy:`CMP0022` is not ``NEW``, they are also made part of the
+:prop_tgt:`LINK_INTERFACE_LIBRARIES`.  Libraries and targets following
+``LINK_PRIVATE`` are linked to, but are not made part of the
+:prop_tgt:`INTERFACE_LINK_LIBRARIES` (or :prop_tgt:`LINK_INTERFACE_LIBRARIES`).
+
+Libraries for Dependents Only (Legacy)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  target_link_libraries(<target> LINK_INTERFACE_LIBRARIES <item>...)
+
+The ``LINK_INTERFACE_LIBRARIES`` mode appends the libraries to the
+:prop_tgt:`INTERFACE_LINK_LIBRARIES` target property instead of using them
+for linking.  If policy :policy:`CMP0022` is not ``NEW``, then this mode
+also appends libraries to the :prop_tgt:`LINK_INTERFACE_LIBRARIES` and its
+per-configuration equivalent.
+
+This signature is for compatibility only.  Prefer the ``INTERFACE`` mode
+instead.
+
+Libraries specified as ``debug`` are wrapped in a generator expression to
+correspond to debug builds.  If policy :policy:`CMP0022` is
+not ``NEW``, the libraries are also appended to the
+:prop_tgt:`LINK_INTERFACE_LIBRARIES_DEBUG <LINK_INTERFACE_LIBRARIES_<CONFIG>>`
+property (or to the properties corresponding to configurations listed in
+the :prop_gbl:`DEBUG_CONFIGURATIONS` global property if it is set).
+Libraries specified as ``optimized`` are appended to the
+:prop_tgt:`INTERFACE_LINK_LIBRARIES` property.  If policy :policy:`CMP0022`
+is not ``NEW``, they are also appended to the
+:prop_tgt:`LINK_INTERFACE_LIBRARIES` property.  Libraries specified as
+``general`` (or without any keyword) are treated as if specified for both
+``debug`` and ``optimized``.
+
+Cyclic Dependencies of Static Libraries
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The library dependency graph is normally acyclic (a DAG), but in the case
+of mutually-dependent ``STATIC`` libraries CMake allows the graph to
+contain cycles (strongly connected components).  When another target links
+to one of the libraries, CMake repeats the entire connected component.
+For example, the code
+
+.. code-block:: cmake
+
+  add_library(A STATIC a.c)
+  add_library(B STATIC b.c)
+  target_link_libraries(A B)
+  target_link_libraries(B A)
+  add_executable(main main.c)
+  target_link_libraries(main A)
+
+links ``main`` to ``A B A B``.  While one repetition is usually
+sufficient, pathological object file and symbol arrangements can require
+more.  One may handle such cases by using the
+:prop_tgt:`LINK_INTERFACE_MULTIPLICITY` target property or by manually
+repeating the component in the last ``target_link_libraries`` call.
+However, if two archives are really so interdependent they should probably
+be combined into a single archive, perhaps by using :ref:`Object Libraries`.
+
+Creating Relocatable Packages
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. |INTERFACE_PROPERTY_LINK| replace:: :prop_tgt:`INTERFACE_LINK_LIBRARIES`
+.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
diff --git a/share/cmake-3.6/Help/command/target_sources.rst b/share/cmake-3.6/Help/command/target_sources.rst
new file mode 100644
index 0000000..d6f148d
--- /dev/null
+++ b/share/cmake-3.6/Help/command/target_sources.rst
@@ -0,0 +1,28 @@
+target_sources
+--------------
+
+Add sources to a target.
+
+::
+
+  target_sources(<target>
+    <INTERFACE|PUBLIC|PRIVATE> [items1...]
+    [<INTERFACE|PUBLIC|PRIVATE> [items2...] ...])
+
+Specify sources to use when compiling a given target.  The
+named ``<target>`` must have been created by a command such as
+:command:`add_executable` or :command:`add_library` and must not be an
+:ref:`IMPORTED Target <Imported Targets>`.
+
+The ``INTERFACE``, ``PUBLIC`` and ``PRIVATE`` keywords are required to
+specify the scope of the following arguments.  ``PRIVATE`` and ``PUBLIC``
+items will populate the :prop_tgt:`SOURCES` property of
+``<target>``.  ``PUBLIC`` and ``INTERFACE`` items will populate the
+:prop_tgt:`INTERFACE_SOURCES` property of ``<target>``.  The
+following arguments specify sources.  Repeated calls for the same
+``<target>`` append items in the order called.
+
+Arguments to ``target_sources`` may use "generator expressions"
+with the syntax ``$<...>``. See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.6/Help/command/try_compile.rst b/share/cmake-3.6/Help/command/try_compile.rst
new file mode 100644
index 0000000..7830deb
--- /dev/null
+++ b/share/cmake-3.6/Help/command/try_compile.rst
@@ -0,0 +1,121 @@
+try_compile
+-----------
+
+.. only:: html
+
+   .. contents::
+
+Try building some code.
+
+Try Compiling Whole Projects
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  try_compile(RESULT_VAR <bindir> <srcdir>
+              <projectName> [<targetName>] [CMAKE_FLAGS <flags>...]
+              [OUTPUT_VARIABLE <var>])
+
+Try building a project.  The success or failure of the ``try_compile``,
+i.e. ``TRUE`` or ``FALSE`` respectively, is returned in ``RESULT_VAR``.
+
+In this form, ``<srcdir>`` should contain a complete CMake project with a
+``CMakeLists.txt`` file and all sources.  The ``<bindir>`` and ``<srcdir>``
+will not be deleted after this command is run.  Specify ``<targetName>`` to
+build a specific target instead of the ``all`` or ``ALL_BUILD`` target.  See
+below for the meaning of other options.
+
+Try Compiling Source Files
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  try_compile(RESULT_VAR <bindir> <srcfile|SOURCES srcfile...>
+              [CMAKE_FLAGS <flags>...]
+              [COMPILE_DEFINITIONS <defs>...]
+              [LINK_LIBRARIES <libs>...]
+              [OUTPUT_VARIABLE <var>]
+              [COPY_FILE <fileName> [COPY_FILE_ERROR <var>]])
+
+Try building an executable from one or more source files.  The success or
+failure of the ``try_compile``, i.e. ``TRUE`` or ``FALSE`` respectively, is
+returned in ``RESULT_VAR``.
+
+In this form the user need only supply one or more source files that include a
+definition for ``main``.  CMake will create a ``CMakeLists.txt`` file to build
+the source(s) as an executable that looks something like this::
+
+  add_definitions(<expanded COMPILE_DEFINITIONS from caller>)
+  include_directories(${INCLUDE_DIRECTORIES})
+  link_directories(${LINK_DIRECTORIES})
+  add_executable(cmTryCompileExec <srcfile>...)
+  target_link_libraries(cmTryCompileExec ${LINK_LIBRARIES})
+
+The options are:
+
+``CMAKE_FLAGS <flags>...``
+  Specify flags of the form ``-DVAR:TYPE=VALUE`` to be passed to
+  the ``cmake`` command-line used to drive the test build.
+  The above example shows how values for variables
+  ``INCLUDE_DIRECTORIES``, ``LINK_DIRECTORIES``, and ``LINK_LIBRARIES``
+  are used.
+
+``COMPILE_DEFINITIONS <defs>...``
+  Specify ``-Ddefinition`` arguments to pass to ``add_definitions``
+  in the generated test project.
+
+``COPY_FILE <fileName>``
+  Copy the linked executable to the given ``<fileName>``.
+
+``COPY_FILE_ERROR <var>``
+  Use after ``COPY_FILE`` to capture into variable ``<var>`` any error
+  message encountered while trying to copy the file.
+
+``LINK_LIBRARIES <libs>...``
+  Specify libraries to be linked in the generated project.
+  The list of libraries may refer to system libraries and to
+  :ref:`Imported Targets <Imported Targets>` from the calling project.
+
+  If this option is specified, any ``-DLINK_LIBRARIES=...`` value
+  given to the ``CMAKE_FLAGS`` option will be ignored.
+
+``OUTPUT_VARIABLE <var>``
+  Store the output from the build process the given variable.
+
+In this version all files in ``<bindir>/CMakeFiles/CMakeTmp`` will be
+cleaned automatically.  For debugging, ``--debug-trycompile`` can be
+passed to ``cmake`` to avoid this clean.  However, multiple sequential
+``try_compile`` operations reuse this single output directory.  If you use
+``--debug-trycompile``, you can only debug one ``try_compile`` call at a time.
+The recommended procedure is to protect all ``try_compile`` calls in your
+project by ``if(NOT DEFINED RESULT_VAR)`` logic, configure with cmake
+all the way through once, then delete the cache entry associated with
+the try_compile call of interest, and then re-run cmake again with
+``--debug-trycompile``.
+
+Other Behavior Settings
+^^^^^^^^^^^^^^^^^^^^^^^
+
+If set, the following variables are passed in to the generated
+try_compile CMakeLists.txt to initialize compile target properties with
+default values:
+
+* :variable:`CMAKE_ENABLE_EXPORTS`
+* :variable:`CMAKE_LINK_SEARCH_START_STATIC`
+* :variable:`CMAKE_LINK_SEARCH_END_STATIC`
+* :variable:`CMAKE_POSITION_INDEPENDENT_CODE`
+
+If :policy:`CMP0056` is set to ``NEW``, then
+:variable:`CMAKE_EXE_LINKER_FLAGS` is passed in as well.
+
+The current setting of :policy:`CMP0065` is set in the generated project.
+
+Set the :variable:`CMAKE_TRY_COMPILE_CONFIGURATION` variable to choose
+a build configuration.
+
+Set the :variable:`CMAKE_TRY_COMPILE_TARGET_TYPE` variable to specify
+the type of target used for the source file signature.
+
+Set the :variable:`CMAKE_TRY_COMPILE_PLATFORM_VARIABLES` variable to specify
+variables that must be propagated into the test project.  This variable is
+meant for use only in toolchain files.
diff --git a/share/cmake-3.6/Help/command/try_run.rst b/share/cmake-3.6/Help/command/try_run.rst
new file mode 100644
index 0000000..e3bd57d
--- /dev/null
+++ b/share/cmake-3.6/Help/command/try_run.rst
@@ -0,0 +1,98 @@
+try_run
+-------
+
+.. only:: html
+
+   .. contents::
+
+Try compiling and then running some code.
+
+Try Compiling and Running Source Files
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+  try_run(RUN_RESULT_VAR COMPILE_RESULT_VAR
+          bindir srcfile [CMAKE_FLAGS <flags>...]
+          [COMPILE_DEFINITIONS <defs>...]
+          [LINK_LIBRARIES <libs>...]
+          [COMPILE_OUTPUT_VARIABLE <var>]
+          [RUN_OUTPUT_VARIABLE <var>]
+          [OUTPUT_VARIABLE <var>]
+          [ARGS <args>...])
+
+Try compiling a ``<srcfile>``.  Returns ``TRUE`` or ``FALSE`` for success
+or failure in ``COMPILE_RESULT_VAR``.  If the compile succeeded, runs the
+executable and returns its exit code in ``RUN_RESULT_VAR``.  If the
+executable was built, but failed to run, then ``RUN_RESULT_VAR`` will be
+set to ``FAILED_TO_RUN``.  See the :command:`try_compile` command for
+information on how the test project is constructed to build the source file.
+
+The options are:
+
+``CMAKE_FLAGS <flags>...``
+  Specify flags of the form ``-DVAR:TYPE=VALUE`` to be passed to
+  the ``cmake`` command-line used to drive the test build.
+  The example in :command:`try_compile` shows how values for variables
+  ``INCLUDE_DIRECTORIES``, ``LINK_DIRECTORIES``, and ``LINK_LIBRARIES``
+  are used.
+
+``COMPILE_DEFINITIONS <defs>...``
+  Specify ``-Ddefinition`` arguments to pass to ``add_definitions``
+  in the generated test project.
+
+``COMPILE_OUTPUT_VARIABLE <var>``
+  Report the compile step build output in a given variable.
+
+``LINK_LIBRARIES <libs>...``
+  Specify libraries to be linked in the generated project.
+  The list of libraries may refer to system libraries and to
+  :ref:`Imported Targets <Imported Targets>` from the calling project.
+
+  If this option is specified, any ``-DLINK_LIBRARIES=...`` value
+  given to the ``CMAKE_FLAGS`` option will be ignored.
+
+``OUTPUT_VARIABLE <var>``
+  Report the compile build output and the output from running the executable
+  in the given variable.  This option exists for legacy reasons.  Prefer
+  ``COMPILE_OUTPUT_VARIABLE`` and ``RUN_OUTPUT_VARIABLE`` instead.
+
+``RUN_OUTPUT_VARIABLE <var>``
+  Report the output from running the executable in a given variable.
+
+Other Behavior Settings
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set the :variable:`CMAKE_TRY_COMPILE_CONFIGURATION` variable to choose
+a build configuration.
+
+Behavior when Cross Compiling
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When cross compiling, the executable compiled in the first step
+usually cannot be run on the build host.  The ``try_run`` command checks
+the :variable:`CMAKE_CROSSCOMPILING` variable to detect whether CMake is in
+cross-compiling mode.  If that is the case, it will still try to compile
+the executable, but it will not try to run the executable unless the
+:variable:`CMAKE_CROSSCOMPILING_EMULATOR` variable is set.  Instead it
+will create cache variables which must be filled by the user or by
+presetting them in some CMake script file to the values the executable
+would have produced if it had been run on its actual target platform.
+These cache entries are:
+
+``<RUN_RESULT_VAR>``
+  Exit code if the executable were to be run on the target platform.
+
+``<RUN_RESULT_VAR>__TRYRUN_OUTPUT``
+  Output from stdout and stderr if the executable were to be run on
+  the target platform.  This is created only if the
+  ``RUN_OUTPUT_VARIABLE`` or ``OUTPUT_VARIABLE`` option was used.
+
+In order to make cross compiling your project easier, use ``try_run``
+only if really required.  If you use ``try_run``, use the
+``RUN_OUTPUT_VARIABLE`` or ``OUTPUT_VARIABLE`` options only if really
+required.  Using them will require that when cross-compiling, the cache
+variables will have to be set manually to the output of the executable.
+You can also "guard" the calls to ``try_run`` with an :command:`if`
+block checking the :variable:`CMAKE_CROSSCOMPILING` variable and
+provide an easy-to-preset alternative for this case.
diff --git a/share/cmake-3.6/Help/command/unset.rst b/share/cmake-3.6/Help/command/unset.rst
new file mode 100644
index 0000000..a1fc95c
--- /dev/null
+++ b/share/cmake-3.6/Help/command/unset.rst
@@ -0,0 +1,25 @@
+unset
+-----
+
+Unset a variable, cache variable, or environment variable.
+
+::
+
+  unset(<variable> [CACHE | PARENT_SCOPE])
+
+Removes the specified variable causing it to become undefined.  If
+``CACHE`` is present then the variable is removed from the cache instead
+of the current scope.
+
+If ``PARENT_SCOPE`` is present then the variable is removed from the scope
+above the current scope.  See the same option in the :command:`set` command
+for further details.
+
+``<variable>`` can be an environment variable such as:
+
+::
+
+  unset(ENV{LD_LIBRARY_PATH})
+
+in which case the variable will be removed from the current
+environment.
diff --git a/share/cmake-3.2/Help/command/use_mangled_mesa.rst b/share/cmake-3.6/Help/command/use_mangled_mesa.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/use_mangled_mesa.rst
rename to share/cmake-3.6/Help/command/use_mangled_mesa.rst
diff --git a/share/cmake-3.6/Help/command/utility_source.rst b/share/cmake-3.6/Help/command/utility_source.rst
new file mode 100644
index 0000000..ee34492
--- /dev/null
+++ b/share/cmake-3.6/Help/command/utility_source.rst
@@ -0,0 +1,24 @@
+utility_source
+--------------
+
+Disallowed.  See CMake Policy :policy:`CMP0034`.
+
+Specify the source tree of a third-party utility.
+
+::
+
+  utility_source(cache_entry executable_name
+                 path_to_source [file1 file2 ...])
+
+When a third-party utility's source is included in the distribution,
+this command specifies its location and name.  The cache entry will
+not be set unless the ``path_to_source`` and all listed files exist.  It
+is assumed that the source tree of the utility will have been built
+before it is needed.
+
+When cross compiling CMake will print a warning if a ``utility_source()``
+command is executed, because in many cases it is used to build an
+executable which is executed later on.  This doesn't work when cross
+compiling, since the executable can run only on their target platform.
+So in this case the cache entry has to be adjusted manually so it
+points to an executable which is runnable on the build host.
diff --git a/share/cmake-3.6/Help/command/variable_requires.rst b/share/cmake-3.6/Help/command/variable_requires.rst
new file mode 100644
index 0000000..9cf9f3f
--- /dev/null
+++ b/share/cmake-3.6/Help/command/variable_requires.rst
@@ -0,0 +1,22 @@
+variable_requires
+-----------------
+
+Disallowed.  See CMake Policy :policy:`CMP0035`.
+
+Use the :command:`if` command instead.
+
+Assert satisfaction of an option's required variables.
+
+::
+
+  variable_requires(TEST_VARIABLE RESULT_VARIABLE
+                    REQUIRED_VARIABLE1
+                    REQUIRED_VARIABLE2 ...)
+
+The first argument (``TEST_VARIABLE``) is the name of the variable to be
+tested, if that variable is false nothing else is done.  If
+``TEST_VARIABLE`` is true, then the next argument (``RESULT_VARIABLE``)
+is a variable that is set to true if all the required variables are set.
+The rest of the arguments are variables that must be true or not set
+to NOTFOUND to avoid an error.  If any are not true, an error is
+reported.
diff --git a/share/cmake-3.2/Help/command/variable_watch.rst b/share/cmake-3.6/Help/command/variable_watch.rst
similarity index 100%
rename from share/cmake-3.2/Help/command/variable_watch.rst
rename to share/cmake-3.6/Help/command/variable_watch.rst
diff --git a/share/cmake-3.6/Help/command/while.rst b/share/cmake-3.6/Help/command/while.rst
new file mode 100644
index 0000000..7509da3
--- /dev/null
+++ b/share/cmake-3.6/Help/command/while.rst
@@ -0,0 +1,17 @@
+while
+-----
+
+Evaluate a group of commands while a condition is true
+
+::
+
+  while(condition)
+    COMMAND1(ARGS ...)
+    COMMAND2(ARGS ...)
+    ...
+  endwhile(condition)
+
+All commands between while and the matching :command:`endwhile` are recorded
+without being invoked.  Once the :command:`endwhile` is evaluated, the
+recorded list of commands is invoked as long as the condition is true.  The
+condition is evaluated using the same logic as the :command:`if` command.
diff --git a/share/cmake-3.6/Help/command/write_file.rst b/share/cmake-3.6/Help/command/write_file.rst
new file mode 100644
index 0000000..40e7557
--- /dev/null
+++ b/share/cmake-3.6/Help/command/write_file.rst
@@ -0,0 +1,20 @@
+write_file
+----------
+
+Deprecated. Use the :command:`file(WRITE)` command instead.
+
+::
+
+  write_file(filename "message to write"... [APPEND])
+
+The first argument is the file name, the rest of the arguments are
+messages to write.  If the argument ``APPEND`` is specified, then the
+message will be appended.
+
+NOTE 1: :command:`file(WRITE)`  and :command:`file(APPEND)`  do exactly
+the same as this one but add some more functionality.
+
+NOTE 2: When using ``write_file`` the produced file cannot be used as an
+input to CMake (CONFIGURE_FILE, source file ...) because it will lead
+to an infinite loop.  Use :command:`configure_file` if you want to
+generate input files to CMake.
diff --git a/share/cmake-3.2/Help/generator/Borland Makefiles.rst b/share/cmake-3.6/Help/generator/Borland Makefiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Borland Makefiles.rst
rename to share/cmake-3.6/Help/generator/Borland Makefiles.rst
diff --git a/share/cmake-3.2/Help/generator/CodeBlocks.rst b/share/cmake-3.6/Help/generator/CodeBlocks.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/CodeBlocks.rst
rename to share/cmake-3.6/Help/generator/CodeBlocks.rst
diff --git a/share/cmake-3.2/Help/generator/CodeLite.rst b/share/cmake-3.6/Help/generator/CodeLite.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/CodeLite.rst
rename to share/cmake-3.6/Help/generator/CodeLite.rst
diff --git a/share/cmake-3.2/Help/generator/Eclipse CDT4.rst b/share/cmake-3.6/Help/generator/Eclipse CDT4.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Eclipse CDT4.rst
rename to share/cmake-3.6/Help/generator/Eclipse CDT4.rst
diff --git a/share/cmake-3.6/Help/generator/Green Hills MULTI.rst b/share/cmake-3.6/Help/generator/Green Hills MULTI.rst
new file mode 100644
index 0000000..4d31690
--- /dev/null
+++ b/share/cmake-3.6/Help/generator/Green Hills MULTI.rst
@@ -0,0 +1,16 @@
+Green Hills MULTI
+-----------------
+
+Generates Green Hills MULTI project files (experimental, work-in-progress).
+
+Customizations are available through the following cache variables:
+
+* ``GHS_BSP_NAME``
+* ``GHS_CUSTOMIZATION``
+* ``GHS_GPJ_MACROS``
+* ``GHS_OS_DIR``
+
+.. note::
+  This generator is deemed experimental as of CMake |release|
+  and is still a work in progress.  Future versions of CMake
+  may make breaking changes as the generator matures.
diff --git a/share/cmake-3.2/Help/generator/KDevelop3.rst b/share/cmake-3.6/Help/generator/KDevelop3.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/KDevelop3.rst
rename to share/cmake-3.6/Help/generator/KDevelop3.rst
diff --git a/share/cmake-3.2/Help/generator/Kate.rst b/share/cmake-3.6/Help/generator/Kate.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Kate.rst
rename to share/cmake-3.6/Help/generator/Kate.rst
diff --git a/share/cmake-3.2/Help/generator/MSYS Makefiles.rst b/share/cmake-3.6/Help/generator/MSYS Makefiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/MSYS Makefiles.rst
rename to share/cmake-3.6/Help/generator/MSYS Makefiles.rst
diff --git a/share/cmake-3.2/Help/generator/MinGW Makefiles.rst b/share/cmake-3.6/Help/generator/MinGW Makefiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/MinGW Makefiles.rst
rename to share/cmake-3.6/Help/generator/MinGW Makefiles.rst
diff --git a/share/cmake-3.2/Help/generator/NMake Makefiles JOM.rst b/share/cmake-3.6/Help/generator/NMake Makefiles JOM.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/NMake Makefiles JOM.rst
rename to share/cmake-3.6/Help/generator/NMake Makefiles JOM.rst
diff --git a/share/cmake-3.2/Help/generator/NMake Makefiles.rst b/share/cmake-3.6/Help/generator/NMake Makefiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/NMake Makefiles.rst
rename to share/cmake-3.6/Help/generator/NMake Makefiles.rst
diff --git a/share/cmake-3.6/Help/generator/Ninja.rst b/share/cmake-3.6/Help/generator/Ninja.rst
new file mode 100644
index 0000000..d94e5f6
--- /dev/null
+++ b/share/cmake-3.6/Help/generator/Ninja.rst
@@ -0,0 +1,12 @@
+Ninja
+-----
+
+Generates build.ninja files.
+
+A build.ninja file is generated into the build tree.  Recent versions
+of the ninja program can build the project through the "all" target.
+An "install" target is also provided.
+
+For each subdirectory ``sub/dir`` of the project an additional target
+named ``sub/dir/all`` is generated that depends on all targets required
+by that subdirectory.
diff --git a/share/cmake-3.2/Help/generator/Sublime Text 2.rst b/share/cmake-3.6/Help/generator/Sublime Text 2.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Sublime Text 2.rst
rename to share/cmake-3.6/Help/generator/Sublime Text 2.rst
diff --git a/share/cmake-3.2/Help/generator/Unix Makefiles.rst b/share/cmake-3.6/Help/generator/Unix Makefiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Unix Makefiles.rst
rename to share/cmake-3.6/Help/generator/Unix Makefiles.rst
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 10 2010.rst b/share/cmake-3.6/Help/generator/Visual Studio 10 2010.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Visual Studio 10 2010.rst
rename to share/cmake-3.6/Help/generator/Visual Studio 10 2010.rst
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 11 2012.rst b/share/cmake-3.6/Help/generator/Visual Studio 11 2012.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Visual Studio 11 2012.rst
rename to share/cmake-3.6/Help/generator/Visual Studio 11 2012.rst
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 12 2013.rst b/share/cmake-3.6/Help/generator/Visual Studio 12 2013.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Visual Studio 12 2013.rst
rename to share/cmake-3.6/Help/generator/Visual Studio 12 2013.rst
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 14 2015.rst b/share/cmake-3.6/Help/generator/Visual Studio 14 2015.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Visual Studio 14 2015.rst
rename to share/cmake-3.6/Help/generator/Visual Studio 14 2015.rst
diff --git a/share/cmake-3.6/Help/generator/Visual Studio 6.rst b/share/cmake-3.6/Help/generator/Visual Studio 6.rst
new file mode 100644
index 0000000..2dd07e0
--- /dev/null
+++ b/share/cmake-3.6/Help/generator/Visual Studio 6.rst
@@ -0,0 +1,6 @@
+Visual Studio 6
+---------------
+
+Removed.  This once generated Visual Studio 6 project files, but the
+generator has been removed since CMake 3.6.  It is still possible to
+build with VS 6 tools using the :generator:`NMake Makefiles` generator.
diff --git a/share/cmake-3.6/Help/generator/Visual Studio 7 .NET 2003.rst b/share/cmake-3.6/Help/generator/Visual Studio 7 .NET 2003.rst
new file mode 100644
index 0000000..1c086a0
--- /dev/null
+++ b/share/cmake-3.6/Help/generator/Visual Studio 7 .NET 2003.rst
@@ -0,0 +1,10 @@
+Visual Studio 7 .NET 2003
+-------------------------
+
+Deprecated.  Generates Visual Studio .NET 2003 project files.
+
+.. note::
+  This generator is deprecated and will be removed
+  in a future version of CMake.  It will still be
+  possible to build with VS 7.1 tools using the
+  :generator:`NMake Makefiles` generator.
diff --git a/share/cmake-3.6/Help/generator/Visual Studio 7.rst b/share/cmake-3.6/Help/generator/Visual Studio 7.rst
new file mode 100644
index 0000000..54d29df
--- /dev/null
+++ b/share/cmake-3.6/Help/generator/Visual Studio 7.rst
@@ -0,0 +1,6 @@
+Visual Studio 7
+---------------
+
+Removed.  This once generated Visual Studio .NET 2002 project files, but
+the generator has been removed since CMake 3.6.  It is still possible to
+build with VS 7.0 tools using the :generator:`NMake Makefiles` generator.
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 8 2005.rst b/share/cmake-3.6/Help/generator/Visual Studio 8 2005.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Visual Studio 8 2005.rst
rename to share/cmake-3.6/Help/generator/Visual Studio 8 2005.rst
diff --git a/share/cmake-3.2/Help/generator/Visual Studio 9 2008.rst b/share/cmake-3.6/Help/generator/Visual Studio 9 2008.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Visual Studio 9 2008.rst
rename to share/cmake-3.6/Help/generator/Visual Studio 9 2008.rst
diff --git a/share/cmake-3.2/Help/generator/Watcom WMake.rst b/share/cmake-3.6/Help/generator/Watcom WMake.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Watcom WMake.rst
rename to share/cmake-3.6/Help/generator/Watcom WMake.rst
diff --git a/share/cmake-3.2/Help/generator/Xcode.rst b/share/cmake-3.6/Help/generator/Xcode.rst
similarity index 100%
rename from share/cmake-3.2/Help/generator/Xcode.rst
rename to share/cmake-3.6/Help/generator/Xcode.rst
diff --git a/share/cmake-3.2/Help/include/COMPILE_DEFINITIONS_DISCLAIMER.txt b/share/cmake-3.6/Help/include/COMPILE_DEFINITIONS_DISCLAIMER.txt
similarity index 100%
rename from share/cmake-3.2/Help/include/COMPILE_DEFINITIONS_DISCLAIMER.txt
rename to share/cmake-3.6/Help/include/COMPILE_DEFINITIONS_DISCLAIMER.txt
diff --git a/share/cmake-3.6/Help/include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt b/share/cmake-3.6/Help/include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
new file mode 100644
index 0000000..a54d728
--- /dev/null
+++ b/share/cmake-3.6/Help/include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
@@ -0,0 +1,18 @@
+
+Note that it is not advisable to populate the ``INSTALL_INTERFACE`` of the
+|INTERFACE_PROPERTY_LINK| of a target with absolute paths to the include
+directories of dependencies.  That would hard-code into installed packages
+the include directory paths for dependencies
+**as found on the machine the package was made on**.
+
+The ``INSTALL_INTERFACE`` of the |INTERFACE_PROPERTY_LINK| is only
+suitable for specifying the required include directories for headers
+provided with the target itself, not those provided by the transitive
+dependencies listed in its :prop_tgt:`INTERFACE_LINK_LIBRARIES` target
+property.  Those dependencies should themselves be targets that specify
+their own header locations in |INTERFACE_PROPERTY_LINK|.
+
+See the :ref:`Creating Relocatable Packages` section of the
+:manual:`cmake-packages(7)` manual for discussion of additional care
+that must be taken when specifying usage requirements while creating
+packages for redistribution.
diff --git a/share/cmake-3.6/Help/include/INTERFACE_LINK_LIBRARIES_WARNING.txt b/share/cmake-3.6/Help/include/INTERFACE_LINK_LIBRARIES_WARNING.txt
new file mode 100644
index 0000000..46e84ac
--- /dev/null
+++ b/share/cmake-3.6/Help/include/INTERFACE_LINK_LIBRARIES_WARNING.txt
@@ -0,0 +1,10 @@
+
+Note that it is not advisable to populate the
+|INTERFACE_PROPERTY_LINK| of a target with absolute paths to dependencies.
+That would hard-code into installed packages the library file paths
+for dependencies **as found on the machine the package was made on**.
+
+See the :ref:`Creating Relocatable Packages` section of the
+:manual:`cmake-packages(7)` manual for discussion of additional care
+that must be taken when specifying usage requirements while creating
+packages for redistribution.
diff --git a/share/cmake-3.2/Help/index.rst b/share/cmake-3.6/Help/index.rst
similarity index 100%
rename from share/cmake-3.2/Help/index.rst
rename to share/cmake-3.6/Help/index.rst
diff --git a/share/cmake-3.6/Help/manual/LINKS.txt b/share/cmake-3.6/Help/manual/LINKS.txt
new file mode 100644
index 0000000..3993ff8
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/LINKS.txt
@@ -0,0 +1,25 @@
+The following resources are available to get help using CMake:
+
+Home Page
+ https://cmake.org
+
+ The primary starting point for learning about CMake.
+
+Frequently Asked Questions
+ https://cmake.org/Wiki/CMake_FAQ
+
+ A Wiki is provided containing answers to frequently asked questions.
+
+Online Documentation
+ https://cmake.org/documentation
+
+ Links to available documentation may be found on this web page.
+
+Mailing List
+ https://cmake.org/mailing-lists
+
+ For help and discussion about using cmake, a mailing list is
+ provided at cmake@cmake.org.  The list is member-post-only but one
+ may sign up on the CMake web page.  Please first read the full
+ documentation at https://cmake.org before posting questions to
+ the list.
diff --git a/share/cmake-3.6/Help/manual/OPTIONS_BUILD.txt b/share/cmake-3.6/Help/manual/OPTIONS_BUILD.txt
new file mode 100644
index 0000000..b428a74
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/OPTIONS_BUILD.txt
@@ -0,0 +1,123 @@
+``-C <initial-cache>``
+ Pre-load a script to populate the cache.
+
+ When cmake is first run in an empty build tree, it creates a
+ CMakeCache.txt file and populates it with customizable settings for
+ the project.  This option may be used to specify a file from which
+ to load cache entries before the first pass through the project's
+ cmake listfiles.  The loaded entries take priority over the
+ project's default values.  The given file should be a CMake script
+ containing SET commands that use the CACHE option, not a
+ cache-format file.
+
+``-D <var>:<type>=<value>, -D <var>=<value>``
+ Create a cmake cache entry.
+
+ When cmake is first run in an empty build tree, it creates a
+ CMakeCache.txt file and populates it with customizable settings for
+ the project.  This option may be used to specify a setting that
+ takes priority over the project's default value.  The option may be
+ repeated for as many cache entries as desired.
+
+ If the ``:<type>`` portion is given it must be one of the types
+ specified by the :command:`set` command documentation for its
+ ``CACHE`` signature.
+ If the ``:<type>`` portion is omitted the entry will be created
+ with no type if it does not exist with a type already.  If a
+ command in the project sets the type to ``PATH`` or ``FILEPATH``
+ then the ``<value>`` will be converted to an absolute path.
+
+ This option may also be given as a single argument:
+ ``-D<var>:<type>=<value>`` or ``-D<var>=<value>``.
+
+``-U <globbing_expr>``
+ Remove matching entries from CMake cache.
+
+ This option may be used to remove one or more variables from the
+ CMakeCache.txt file, globbing expressions using * and ? are
+ supported.  The option may be repeated for as many cache entries as
+ desired.
+
+ Use with care, you can make your CMakeCache.txt non-working.
+
+``-G <generator-name>``
+ Specify a build system generator.
+
+ CMake may support multiple native build systems on certain
+ platforms.  A generator is responsible for generating a particular
+ build system.  Possible generator names are specified in the
+ :manual:`cmake-generators(7)` manual.
+
+``-T <toolset-name>``
+ Specify toolset name if supported by generator.
+
+ Some CMake generators support a toolset name to be given to the
+ native build system to choose a compiler.  This is supported only on
+ specific generators:
+
+ ::
+
+   Visual Studio >= 10
+   Xcode >= 3.0
+
+ See native build system documentation for allowed toolset names.
+
+``-A <platform-name>``
+ Specify platform name if supported by generator.
+
+ Some CMake generators support a platform name to be given to the
+ native build system to choose a compiler or SDK.  This is supported only on
+ specific generators::
+
+   Visual Studio >= 8
+
+ See native build system documentation for allowed platform names.
+
+``-Wno-dev``
+ Suppress developer warnings.
+
+ Suppress warnings that are meant for the author of the
+ CMakeLists.txt files. By default this will also turn off
+ deprecation warnings.
+
+``-Wdev``
+ Enable developer warnings.
+
+ Enable warnings that are meant for the author of the CMakeLists.txt
+ files. By default this will also turn on deprecation warnings.
+
+``-Werror=dev``
+ Make developer warnings errors.
+
+ Make warnings that are meant for the author of the CMakeLists.txt files
+ errors. By default this will also turn on deprecated warnings as errors.
+
+``-Wno-error=dev``
+ Make developer warnings not errors.
+
+ Make warnings that are meant for the author of the CMakeLists.txt files not
+ errors. By default this will also turn off deprecated warnings as errors.
+
+``-Wdeprecated``
+ Enable deprecated functionality warnings.
+
+ Enable warnings for usage of deprecated functionality, that are meant
+ for the author of the CMakeLists.txt files.
+
+``-Wno-deprecated``
+ Suppress deprecated functionality warnings.
+
+ Suppress warnings for usage of deprecated functionality, that are meant
+ for the author of the CMakeLists.txt files.
+
+``-Werror=deprecated``
+ Make deprecated macro and function warnings errors.
+
+ Make warnings for usage of deprecated macros and functions, that are meant
+ for the author of the CMakeLists.txt files, errors.
+
+``-Wno-error=deprecated``
+ Make deprecated macro and function warnings not errors.
+
+ Make warnings for usage of deprecated macros and functions, that are meant
+ for the author of the CMakeLists.txt files, not errors.
diff --git a/share/cmake-3.2/Help/manual/OPTIONS_HELP.txt b/share/cmake-3.6/Help/manual/OPTIONS_HELP.txt
similarity index 100%
rename from share/cmake-3.2/Help/manual/OPTIONS_HELP.txt
rename to share/cmake-3.6/Help/manual/OPTIONS_HELP.txt
diff --git a/share/cmake-3.2/Help/manual/ccmake.1.rst b/share/cmake-3.6/Help/manual/ccmake.1.rst
similarity index 100%
rename from share/cmake-3.2/Help/manual/ccmake.1.rst
rename to share/cmake-3.6/Help/manual/ccmake.1.rst
diff --git a/share/cmake-3.6/Help/manual/cmake-buildsystem.7.rst b/share/cmake-3.6/Help/manual/cmake-buildsystem.7.rst
new file mode 100644
index 0000000..07bf33f
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-buildsystem.7.rst
@@ -0,0 +1,989 @@
+.. cmake-manual-description: CMake Buildsystem Reference
+
+cmake-buildsystem(7)
+********************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+A CMake-based buildsystem is organized as a set of high-level logical
+targets.  Each target corresponds to an executable or library, or
+is a custom target containing custom commands.  Dependencies between the
+targets are expressed in the buildsystem to determine the build order
+and the rules for regeneration in response to change.
+
+Binary Targets
+==============
+
+Executables and libraries are defined using the :command:`add_executable`
+and :command:`add_library` commands.  The resulting binary files have
+appropriate prefixes, suffixes and extensions for the platform targeted.
+Dependencies between binary targets are expressed using the
+:command:`target_link_libraries` command:
+
+.. code-block:: cmake
+
+  add_library(archive archive.cpp zip.cpp lzma.cpp)
+  add_executable(zipapp zipapp.cpp)
+  target_link_libraries(zipapp archive)
+
+``archive`` is defined as a static library -- an archive containing objects
+compiled from ``archive.cpp``, ``zip.cpp``, and ``lzma.cpp``.  ``zipapp``
+is defined as an executable formed by compiling and linking ``zipapp.cpp``.
+When linking the ``zipapp`` executable, the ``archive`` static library is
+linked in.
+
+Binary Executables
+------------------
+
+The :command:`add_executable` command defines an executable target:
+
+.. code-block:: cmake
+
+  add_executable(mytool mytool.cpp)
+
+Commands such as :command:`add_custom_command`, which generates rules to be
+run at build time can transparently use an :prop_tgt:`EXECUTABLE <TYPE>`
+target as a ``COMMAND`` executable.  The buildsystem rules will ensure that
+the executable is built before attempting to run the command.
+
+Binary Library Types
+--------------------
+
+.. _`Normal Libraries`:
+
+Normal Libraries
+^^^^^^^^^^^^^^^^
+
+By default, the :command:`add_library` command defines a static library,
+unless a type is specified.  A type may be specified when using the command:
+
+.. code-block:: cmake
+
+  add_library(archive SHARED archive.cpp zip.cpp lzma.cpp)
+
+.. code-block:: cmake
+
+  add_library(archive STATIC archive.cpp zip.cpp lzma.cpp)
+
+The :variable:`BUILD_SHARED_LIBS` variable may be enabled to change the
+behavior of :command:`add_library` to build shared libraries by default.
+
+In the context of the buildsystem definition as a whole, it is largely
+irrelevant whether particular libraries are ``SHARED`` or ``STATIC`` --
+the commands, dependency specifications and other APIs work similarly
+regardless of the library type.  The ``MODULE`` library type is
+dissimilar in that it is generally not linked to -- it is not used in
+the right-hand-side of the :command:`target_link_libraries` command.
+It is a type which is loaded as a plugin using runtime techniques.
+If the library does not export any unmanaged symbols (e.g. Windows
+resource DLL, C++/CLI DLL), it is required that the library not be a
+``SHARED`` library because CMake expects ``SHARED`` libraries to export
+at least one symbol.
+
+.. code-block:: cmake
+
+  add_library(archive MODULE 7z.cpp)
+
+.. _`Apple Frameworks`:
+
+Apple Frameworks
+""""""""""""""""
+
+A ``SHARED`` library may be marked with the :prop_tgt:`FRAMEWORK`
+target property to create an OS X or iOS Framework Bundle.
+The ``MACOSX_FRAMEWORK_IDENTIFIER`` sets ``CFBundleIdentifier`` key
+and it uniquely identifies the bundle.
+
+.. code-block:: cmake
+
+  add_library(MyFramework SHARED MyFramework.cpp)
+  set_target_properties(MyFramework PROPERTIES
+    FRAMEWORK TRUE
+    FRAMEWORK_VERSION A
+    MACOSX_FRAMEWORK_IDENTIFIER org.cmake.MyFramework
+  )
+
+.. _`Object Libraries`:
+
+Object Libraries
+^^^^^^^^^^^^^^^^
+
+The ``OBJECT`` library type is also not linked to. It defines a non-archival
+collection of object files resulting from compiling the given source files.
+The object files collection can be used as source inputs to other targets:
+
+.. code-block:: cmake
+
+  add_library(archive OBJECT archive.cpp zip.cpp lzma.cpp)
+
+  add_library(archiveExtras STATIC $<TARGET_OBJECTS:archive> extras.cpp)
+
+  add_executable(test_exe $<TARGET_OBJECTS:archive> test.cpp)
+
+``OBJECT`` libraries may only be used locally as sources in a buildsystem --
+they may not be installed, exported, or used in the right hand side of
+:command:`target_link_libraries`.  They also may not be used as the ``TARGET``
+in a use of the :command:`add_custom_command(TARGET)` command signature.
+
+Although object libraries may not be named directly in calls to
+the :command:`target_link_libraries` command, they can be "linked"
+indirectly by using an :ref:`Interface Library <Interface Libraries>`
+whose :prop_tgt:`INTERFACE_SOURCES` target property is set to name
+``$<TARGET_OBJECTS:objlib>``.
+
+Build Specification and Usage Requirements
+==========================================
+
+The :command:`target_include_directories`, :command:`target_compile_definitions`
+and :command:`target_compile_options` commands specify the build specifications
+and the usage requirements of binary targets.  The commands populate the
+:prop_tgt:`INCLUDE_DIRECTORIES`, :prop_tgt:`COMPILE_DEFINITIONS` and
+:prop_tgt:`COMPILE_OPTIONS` target properties respectively, and/or the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`, :prop_tgt:`INTERFACE_COMPILE_DEFINITIONS`
+and :prop_tgt:`INTERFACE_COMPILE_OPTIONS` target properties.
+
+Each of the commands has a ``PRIVATE``, ``PUBLIC`` and ``INTERFACE`` mode.  The
+``PRIVATE`` mode populates only the non-``INTERFACE_`` variant of the target
+property and the ``INTERFACE`` mode populates only the ``INTERFACE_`` variants.
+The ``PUBLIC`` mode populates both variants of the respective target property.
+Each command may be invoked with multiple uses of each keyword:
+
+.. code-block:: cmake
+
+  target_compile_definitions(archive
+    PRIVATE BUILDING_WITH_LZMA
+    INTERFACE USING_ARCHIVE_LIB
+  )
+
+Note that usage requirements are not designed as a way to make downstreams
+use particular :prop_tgt:`COMPILE_OPTIONS` or
+:prop_tgt:`COMPILE_DEFINITIONS` etc for convenience only.  The contents of
+the properties must be **requirements**, not merely recommendations or
+convenience.
+
+See the :ref:`Creating Relocatable Packages` section of the
+:manual:`cmake-packages(7)` manual for discussion of additional care
+that must be taken when specifying usage requirements while creating
+packages for redistribution.
+
+Target Properties
+-----------------
+
+The contents of the :prop_tgt:`INCLUDE_DIRECTORIES`,
+:prop_tgt:`COMPILE_DEFINITIONS` and :prop_tgt:`COMPILE_OPTIONS` target
+properties are used appropriately when compiling the source files of a
+binary target.
+
+Entries in the :prop_tgt:`INCLUDE_DIRECTORIES` are added to the compile line
+with ``-I`` or ``-isystem`` prefixes and in the order of appearance in the
+property value.
+
+Entries in the :prop_tgt:`COMPILE_DEFINITIONS` are prefixed with ``-D`` or
+``/D`` and added to the compile line in an unspecified order.  The
+:prop_tgt:`DEFINE_SYMBOL` target property is also added as a compile
+definition as a special convenience case for ``SHARED`` and ``MODULE``
+library targets.
+
+Entries in the :prop_tgt:`COMPILE_OPTIONS` are escaped for the shell and added
+in the order of appearance in the property value.  Several compile options have
+special separate handling, such as :prop_tgt:`POSITION_INDEPENDENT_CODE`.
+
+The contents of the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
+:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS` and
+:prop_tgt:`INTERFACE_COMPILE_OPTIONS` target properties are
+*Usage Requirements* -- they specify content which consumers
+must use to correctly compile and link with the target they appear on.
+For any binary target, the contents of each ``INTERFACE_`` property on
+each target specified in a :command:`target_link_libraries` command is
+consumed:
+
+.. code-block:: cmake
+
+  set(srcs archive.cpp zip.cpp)
+  if (LZMA_FOUND)
+    list(APPEND srcs lzma.cpp)
+  endif()
+  add_library(archive SHARED ${srcs})
+  if (LZMA_FOUND)
+    # The archive library sources are compiled with -DBUILDING_WITH_LZMA
+    target_compile_definitions(archive PRIVATE BUILDING_WITH_LZMA)
+  endif()
+  target_compile_definitions(archive INTERFACE USING_ARCHIVE_LIB)
+
+  add_executable(consumer)
+  # Link consumer to archive and consume its usage requirements. The consumer
+  # executable sources are compiled with -DUSING_ARCHIVE_LIB.
+  target_link_libraries(consumer archive)
+
+Because it is common to require that the source directory and corresponding
+build directory are added to the :prop_tgt:`INCLUDE_DIRECTORIES`, the
+:variable:`CMAKE_INCLUDE_CURRENT_DIR` variable can be enabled to conveniently
+add the corresponding directories to the :prop_tgt:`INCLUDE_DIRECTORIES` of
+all targets.  The variable :variable:`CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE`
+can be enabled to add the corresponding directories to the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of all targets.  This makes use of
+targets in multiple different directories convenient through use of the
+:command:`target_link_libraries` command.
+
+
+.. _`Target Usage Requirements`:
+
+Transitive Usage Requirements
+-----------------------------
+
+The usage requirements of a target can transitively propagate to dependents.
+The :command:`target_link_libraries` command has ``PRIVATE``,
+``INTERFACE`` and ``PUBLIC`` keywords to control the propagation.
+
+.. code-block:: cmake
+
+  add_library(archive archive.cpp)
+  target_compile_definitions(archive INTERFACE USING_ARCHIVE_LIB)
+
+  add_library(serialization serialization.cpp)
+  target_compile_definitions(serialization INTERFACE USING_SERIALIZATION_LIB)
+
+  add_library(archiveExtras extras.cpp)
+  target_link_libraries(archiveExtras PUBLIC archive)
+  target_link_libraries(archiveExtras PRIVATE serialization)
+  # archiveExtras is compiled with -DUSING_ARCHIVE_LIB
+  # and -DUSING_SERIALIZATION_LIB
+
+  add_executable(consumer consumer.cpp)
+  # consumer is compiled with -DUSING_ARCHIVE_LIB
+  target_link_libraries(consumer archiveExtras)
+
+Because ``archive`` is a ``PUBLIC`` dependency of ``archiveExtras``, the
+usage requirements of it are propagated to ``consumer`` too.  Because
+``serialization`` is a ``PRIVATE`` dependency of ``archive``, the usage
+requirements of it are not propagated to ``consumer``.
+
+Generally, a dependency should be specified in a use of
+:command:`target_link_libraries` with the ``PRIVATE`` keyword if it is used by
+only the implementation of a library, and not in the header files.  If a
+dependency is additionally used in the header files of a library (e.g. for
+class inheritance), then it should be specified as a ``PUBLIC`` dependency.
+A dependency which is not used by the implementation of a library, but only by
+its headers should be specified as an ``INTERFACE`` dependency.  The
+:command:`target_link_libraries` command may be invoked with multiple uses of
+each keyword:
+
+.. code-block:: cmake
+
+  target_link_libraries(archiveExtras
+    PUBLIC archive
+    PRIVATE serialization
+  )
+
+Usage requirements are propagated by reading the ``INTERFACE_`` variants
+of target properties from dependencies and appending the values to the
+non-``INTERFACE_`` variants of the operand.  For example, the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of dependencies is read and
+appended to the :prop_tgt:`INCLUDE_DIRECTORIES` of the operand.  In cases
+where order is relevant and maintained, and the order resulting from the
+:command:`target_link_libraries` calls does not allow correct compilation,
+use of an appropriate command to set the property directly may update the
+order.
+
+For example, if the linked libraries for a target must be specified
+in the order ``lib1`` ``lib2`` ``lib3`` , but the include directories must
+be specified in the order ``lib3`` ``lib1`` ``lib2``:
+
+.. code-block:: cmake
+
+  target_link_libraries(myExe lib1 lib2 lib3)
+  target_include_directories(myExe
+    PRIVATE $<TARGET_PROPERTY:lib3,INTERFACE_INCLUDE_DIRECTORIES>)
+
+Note that care must be taken when specifying usage requirements for targets
+which will be exported for installation using the :command:`install(EXPORT)`
+command.  See :ref:`Creating Packages` for more.
+
+.. _`Compatible Interface Properties`:
+
+Compatible Interface Properties
+-------------------------------
+
+Some target properties are required to be compatible between a target and
+the interface of each dependency.  For example, the
+:prop_tgt:`POSITION_INDEPENDENT_CODE` target property may specify a
+boolean value of whether a target should be compiled as
+position-independent-code, which has platform-specific consequences.
+A target may also specify the usage requirement
+:prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE` to communicate that
+consumers must be compiled as position-independent-code.
+
+.. code-block:: cmake
+
+  add_executable(exe1 exe1.cpp)
+  set_property(TARGET exe1 PROPERTY POSITION_INDEPENDENT_CODE ON)
+
+  add_library(lib1 SHARED lib1.cpp)
+  set_property(TARGET lib1 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
+
+  add_executable(exe2 exe2.cpp)
+  target_link_libraries(exe2 lib1)
+
+Here, both ``exe1`` and ``exe2`` will be compiled as position-independent-code.
+``lib1`` will also be compiled as position-independent-code because that is the
+default setting for ``SHARED`` libraries.  If dependencies have conflicting,
+non-compatible requirements :manual:`cmake(1)` issues a diagnostic:
+
+.. code-block:: cmake
+
+  add_library(lib1 SHARED lib1.cpp)
+  set_property(TARGET lib1 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
+
+  add_library(lib2 SHARED lib2.cpp)
+  set_property(TARGET lib2 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE OFF)
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 lib1)
+  set_property(TARGET exe1 PROPERTY POSITION_INDEPENDENT_CODE OFF)
+
+  add_executable(exe2 exe2.cpp)
+  target_link_libraries(exe2 lib1 lib2)
+
+The ``lib1`` requirement ``INTERFACE_POSITION_INDEPENDENT_CODE`` is not
+"compatible" with the ``POSITION_INDEPENDENT_CODE`` property of the ``exe1``
+target.  The library requires that consumers are built as
+position-independent-code, while the executable specifies to not built as
+position-independent-code, so a diagnostic is issued.
+
+The ``lib1`` and ``lib2`` requirements are not "compatible".  One of them
+requires that consumers are built as position-independent-code, while
+the other requires that consumers are not built as position-independent-code.
+Because ``exe2`` links to both and they are in conflict, a diagnostic is
+issued.
+
+To be "compatible", the :prop_tgt:`POSITION_INDEPENDENT_CODE` property,
+if set must be either the same, in a boolean sense, as the
+:prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE` property of all transitively
+specified dependencies on which that property is set.
+
+This property of "compatible interface requirement" may be extended to other
+properties by specifying the property in the content of the
+:prop_tgt:`COMPATIBLE_INTERFACE_BOOL` target property.  Each specified property
+must be compatible between the consuming target and the corresponding property
+with an ``INTERFACE_`` prefix from each dependency:
+
+.. code-block:: cmake
+
+  add_library(lib1Version2 SHARED lib1_v2.cpp)
+  set_property(TARGET lib1Version2 PROPERTY INTERFACE_CUSTOM_PROP ON)
+  set_property(TARGET lib1Version2 APPEND PROPERTY
+    COMPATIBLE_INTERFACE_BOOL CUSTOM_PROP
+  )
+
+  add_library(lib1Version3 SHARED lib1_v3.cpp)
+  set_property(TARGET lib1Version3 PROPERTY INTERFACE_CUSTOM_PROP OFF)
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 lib1Version2) # CUSTOM_PROP will be ON
+
+  add_executable(exe2 exe2.cpp)
+  target_link_libraries(exe2 lib1Version2 lib1Version3) # Diagnostic
+
+Non-boolean properties may also participate in "compatible interface"
+computations.  Properties specified in the
+:prop_tgt:`COMPATIBLE_INTERFACE_STRING`
+property must be either unspecified or compare to the same string among
+all transitively specified dependencies. This can be useful to ensure
+that multiple incompatible versions of a library are not linked together
+through transitive requirements of a target:
+
+.. code-block:: cmake
+
+  add_library(lib1Version2 SHARED lib1_v2.cpp)
+  set_property(TARGET lib1Version2 PROPERTY INTERFACE_LIB_VERSION 2)
+  set_property(TARGET lib1Version2 APPEND PROPERTY
+    COMPATIBLE_INTERFACE_STRING LIB_VERSION
+  )
+
+  add_library(lib1Version3 SHARED lib1_v3.cpp)
+  set_property(TARGET lib1Version3 PROPERTY INTERFACE_LIB_VERSION 3)
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 lib1Version2) # LIB_VERSION will be "2"
+
+  add_executable(exe2 exe2.cpp)
+  target_link_libraries(exe2 lib1Version2 lib1Version3) # Diagnostic
+
+The :prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MAX` target property specifies
+that content will be evaluated numerically and the maximum number among all
+specified will be calculated:
+
+.. code-block:: cmake
+
+  add_library(lib1Version2 SHARED lib1_v2.cpp)
+  set_property(TARGET lib1Version2 PROPERTY INTERFACE_CONTAINER_SIZE_REQUIRED 200)
+  set_property(TARGET lib1Version2 APPEND PROPERTY
+    COMPATIBLE_INTERFACE_NUMBER_MAX CONTAINER_SIZE_REQUIRED
+  )
+
+  add_library(lib1Version3 SHARED lib1_v3.cpp)
+  set_property(TARGET lib1Version3 PROPERTY INTERFACE_CONTAINER_SIZE_REQUIRED 1000)
+
+  add_executable(exe1 exe1.cpp)
+  # CONTAINER_SIZE_REQUIRED will be "200"
+  target_link_libraries(exe1 lib1Version2)
+
+  add_executable(exe2 exe2.cpp)
+  # CONTAINER_SIZE_REQUIRED will be "1000"
+  target_link_libraries(exe2 lib1Version2 lib1Version3)
+
+Similarly, the :prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MIN` may be used to
+calculate the numeric minimum value for a property from dependencies.
+
+Each calculated "compatible" property value may be read in the consumer at
+generate-time using generator expressions.
+
+Note that for each dependee, the set of properties specified in each
+compatible interface property must not intersect with the set specified in
+any of the other properties.
+
+Property Origin Debugging
+-------------------------
+
+Because build specifications can be determined by dependencies, the lack of
+locality of code which creates a target and code which is responsible for
+setting build specifications may make the code more difficult to reason about.
+:manual:`cmake(1)` provides a debugging facility to print the origin of the
+contents of properties which may be determined by dependencies.  The properties
+which can be debugged are listed in the
+:variable:`CMAKE_DEBUG_TARGET_PROPERTIES` variable documentation:
+
+.. code-block:: cmake
+
+  set(CMAKE_DEBUG_TARGET_PROPERTIES
+    INCLUDE_DIRECTORIES
+    COMPILE_DEFINITIONS
+    POSITION_INDEPENDENT_CODE
+    CONTAINER_SIZE_REQUIRED
+    LIB_VERSION
+  )
+  add_executable(exe1 exe1.cpp)
+
+In the case of properties listed in :prop_tgt:`COMPATIBLE_INTERFACE_BOOL` or
+:prop_tgt:`COMPATIBLE_INTERFACE_STRING`, the debug output shows which target
+was responsible for setting the property, and which other dependencies also
+defined the property.  In the case of
+:prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MAX` and
+:prop_tgt:`COMPATIBLE_INTERFACE_NUMBER_MIN`, the debug output shows the
+value of the property from each dependency, and whether the value determines
+the new extreme.
+
+Build Specification with Generator Expressions
+----------------------------------------------
+
+Build specifications may use
+:manual:`generator expressions <cmake-generator-expressions(7)>` containing
+content which may be conditional or known only at generate-time.  For example,
+the calculated "compatible" value of a property may be read with the
+``TARGET_PROPERTY`` expression:
+
+.. code-block:: cmake
+
+  add_library(lib1Version2 SHARED lib1_v2.cpp)
+  set_property(TARGET lib1Version2 PROPERTY
+    INTERFACE_CONTAINER_SIZE_REQUIRED 200)
+  set_property(TARGET lib1Version2 APPEND PROPERTY
+    COMPATIBLE_INTERFACE_NUMBER_MAX CONTAINER_SIZE_REQUIRED
+  )
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 lib1Version2)
+  target_compile_definitions(exe1 PRIVATE
+      CONTAINER_SIZE=$<TARGET_PROPERTY:CONTAINER_SIZE_REQUIRED>
+  )
+
+In this case, the ``exe1`` source files will be compiled with
+``-DCONTAINER_SIZE=200``.
+
+Configuration determined build specifications may be conveniently set using
+the ``CONFIG`` generator expression.
+
+.. code-block:: cmake
+
+  target_compile_definitions(exe1 PRIVATE
+      $<$<CONFIG:Debug>:DEBUG_BUILD>
+  )
+
+The ``CONFIG`` parameter is compared case-insensitively with the configuration
+being built.  In the presence of :prop_tgt:`IMPORTED` targets, the content of
+:prop_tgt:`MAP_IMPORTED_CONFIG_DEBUG <MAP_IMPORTED_CONFIG_<CONFIG>>` is also
+accounted for by this expression.
+
+Some buildsystems generated by :manual:`cmake(1)` have a predetermined
+build-configuration set in the :variable:`CMAKE_BUILD_TYPE` variable.  The
+buildsystem for the IDEs such as Visual Studio and Xcode are generated
+independent of the build-configuration, and the actual build configuration
+is not known until build-time.  Therefore, code such as
+
+.. code-block:: cmake
+
+  string(TOLOWER ${CMAKE_BUILD_TYPE} _type)
+  if (_type STREQUAL debug)
+    target_compile_definitions(exe1 PRIVATE DEBUG_BUILD)
+  endif()
+
+may appear to work for ``Makefile`` based and ``Ninja`` generators, but is not
+portable to IDE generators.  Additionally, the :prop_tgt:`IMPORTED`
+configuration-mappings are not accounted for with code like this, so it should
+be avoided.
+
+The unary ``TARGET_PROPERTY`` generator expression and the ``TARGET_POLICY``
+generator expression are evaluated with the consuming target context.  This
+means that a usage requirement specification may be evaluated differently based
+on the consumer:
+
+.. code-block:: cmake
+
+  add_library(lib1 lib1.cpp)
+  target_compile_definitions(lib1 INTERFACE
+    $<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,EXECUTABLE>:LIB1_WITH_EXE>
+    $<$<STREQUAL:$<TARGET_PROPERTY:TYPE>,SHARED_LIBRARY>:LIB1_WITH_SHARED_LIB>
+    $<$<TARGET_POLICY:CMP0041>:CONSUMER_CMP0041_NEW>
+  )
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 lib1)
+
+  cmake_policy(SET CMP0041 NEW)
+
+  add_library(shared_lib shared_lib.cpp)
+  target_link_libraries(shared_lib lib1)
+
+The ``exe1`` executable will be compiled with ``-DLIB1_WITH_EXE``, while the
+``shared_lib`` shared library will be compiled with ``-DLIB1_WITH_SHARED_LIB``
+and ``-DCONSUMER_CMP0041_NEW``, because policy :policy:`CMP0041` is
+``NEW`` at the point where the ``shared_lib`` target is created.
+
+The ``BUILD_INTERFACE`` expression wraps requirements which are only used when
+consumed from a target in the same buildsystem, or when consumed from a target
+exported to the build directory using the :command:`export` command.  The
+``INSTALL_INTERFACE`` expression wraps requirements which are only used when
+consumed from a target which has been installed and exported with the
+:command:`install(EXPORT)` command:
+
+.. code-block:: cmake
+
+  add_library(ClimbingStats climbingstats.cpp)
+  target_compile_definitions(ClimbingStats INTERFACE
+    $<BUILD_INTERFACE:ClimbingStats_FROM_BUILD_LOCATION>
+    $<INSTALL_INTERFACE:ClimbingStats_FROM_INSTALLED_LOCATION>
+  )
+  install(TARGETS ClimbingStats EXPORT libExport ${InstallArgs})
+  install(EXPORT libExport NAMESPACE Upstream::
+          DESTINATION lib/cmake/ClimbingStats)
+  export(EXPORT libExport NAMESPACE Upstream::)
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 ClimbingStats)
+
+In this case, the ``exe1`` executable will be compiled with
+``-DClimbingStats_FROM_BUILD_LOCATION``.  The exporting commands generate
+:prop_tgt:`IMPORTED` targets with either the ``INSTALL_INTERFACE`` or the
+``BUILD_INTERFACE`` omitted, and the ``*_INTERFACE`` marker stripped away.
+A separate project consuming the ``ClimbingStats`` package would contain:
+
+.. code-block:: cmake
+
+  find_package(ClimbingStats REQUIRED)
+
+  add_executable(Downstream main.cpp)
+  target_link_libraries(Downstream Upstream::ClimbingStats)
+
+Depending on whether the ``ClimbingStats`` package was used from the build
+location or the install location, the ``Downstream`` target would be compiled
+with either ``-DClimbingStats_FROM_BUILD_LOCATION`` or
+``-DClimbingStats_FROM_INSTALL_LOCATION``.  For more about packages and
+exporting see the :manual:`cmake-packages(7)` manual.
+
+.. _`Include Directories and Usage Requirements`:
+
+Include Directories and Usage Requirements
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Include directories require some special consideration when specified as usage
+requirements and when used with generator expressions.  The
+:command:`target_include_directories` command accepts both relative and
+absolute include directories:
+
+.. code-block:: cmake
+
+  add_library(lib1 lib1.cpp)
+  target_include_directories(lib1 PRIVATE
+    /absolute/path
+    relative/path
+  )
+
+Relative paths are interpreted relative to the source directory where the
+command appears.  Relative paths are not allowed in the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of :prop_tgt:`IMPORTED` targets.
+
+In cases where a non-trivial generator expression is used, the
+``INSTALL_PREFIX`` expression may be used within the argument of an
+``INSTALL_INTERFACE`` expression.  It is a replacement marker which
+expands to the installation prefix when imported by a consuming project.
+
+Include directories usage requirements commonly differ between the build-tree
+and the install-tree.  The ``BUILD_INTERFACE`` and ``INSTALL_INTERFACE``
+generator expressions can be used to describe separate usage requirements
+based on the usage location.  Relative paths are allowed within the
+``INSTALL_INTERFACE`` expression and are interpreted relative to the
+installation prefix.  For example:
+
+.. code-block:: cmake
+
+  add_library(ClimbingStats climbingstats.cpp)
+  target_include_directories(ClimbingStats INTERFACE
+    $<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR}/generated>
+    $<INSTALL_INTERFACE:/absolute/path>
+    $<INSTALL_INTERFACE:relative/path>
+    $<INSTALL_INTERFACE:$<INSTALL_PREFIX>/$<CONFIG>/generated>
+  )
+
+Two convenience APIs are provided relating to include directories usage
+requirements.  The :variable:`CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE` variable
+may be enabled, with an equivalent effect to:
+
+.. code-block:: cmake
+
+  set_property(TARGET tgt APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES
+    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR};${CMAKE_CURRENT_BINARY_DIR}>
+  )
+
+for each target affected.  The convenience for installed targets is
+an ``INCLUDES DESTINATION`` component with the :command:`install(TARGETS)`
+command:
+
+.. code-block:: cmake
+
+  install(TARGETS foo bar bat EXPORT tgts ${dest_args}
+    INCLUDES DESTINATION include
+  )
+  install(EXPORT tgts ${other_args})
+  install(FILES ${headers} DESTINATION include)
+
+This is equivalent to appending ``${CMAKE_INSTALL_PREFIX}/include`` to the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of each of the installed
+:prop_tgt:`IMPORTED` targets when generated by :command:`install(EXPORT)`.
+
+When the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of an
+:ref:`imported target <Imported targets>` is consumed, the entries in the
+property are treated as ``SYSTEM`` include directories, as if they were
+listed in the :prop_tgt:`INTERFACE_SYSTEM_INCLUDE_DIRECTORIES` of the
+dependency. This can result in omission of compiler warnings for headers
+found in those directories.  This behavior for :ref:`imported targets` may
+be controlled with the :prop_tgt:`NO_SYSTEM_FROM_IMPORTED` target property.
+
+If a binary target is linked transitively to a Mac OX framework, the
+``Headers`` directory of the framework is also treated as a usage requirement.
+This has the same effect as passing the framework directory as an include
+directory.
+
+Link Libraries and Generator Expressions
+----------------------------------------
+
+Like build specifications, :prop_tgt:`link libraries <LINK_LIBRARIES>` may be
+specified with generator expression conditions.  However, as consumption of
+usage requirements is based on collection from linked dependencies, there is
+an additional limitation that the link dependencies must form a "directed
+acyclic graph".  That is, if linking to a target is dependent on the value of
+a target property, that target property may not be dependent on the linked
+dependencies:
+
+.. code-block:: cmake
+
+  add_library(lib1 lib1.cpp)
+  add_library(lib2 lib2.cpp)
+  target_link_libraries(lib1 PUBLIC
+    $<$<TARGET_PROPERTY:POSITION_INDEPENDENT_CODE>:lib2>
+  )
+  add_library(lib3 lib3.cpp)
+  set_property(TARGET lib3 PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 lib1 lib3)
+
+As the value of the :prop_tgt:`POSITION_INDEPENDENT_CODE` property of
+the ``exe1`` target is dependent on the linked libraries (``lib3``), and the
+edge of linking ``exe1`` is determined by the same
+:prop_tgt:`POSITION_INDEPENDENT_CODE` property, the dependency graph above
+contains a cycle.  :manual:`cmake(1)` issues a diagnostic in this case.
+
+.. _`Output Artifacts`:
+
+Output Artifacts
+----------------
+
+The buildsystem targets created by the :command:`add_library` and
+:command:`add_executable` commands create rules to create binary outputs.
+The exact output location of the binaries can only be determined at
+generate-time because it can depend on the build-configuration and the
+link-language of linked dependencies etc.  ``TARGET_FILE``,
+``TARGET_LINKER_FILE`` and related expressions can be used to access the
+name and location of generated binaries.  These expressions do not work
+for ``OBJECT`` libraries however, as there is no single file generated
+by such libraries which is relevant to the expressions.
+
+There are three kinds of output artifacts that may be build by targets
+as detailed in the following sections.  Their classification differs
+between DLL platforms and non-DLL platforms.  All Windows-based
+systems including Cygwin are DLL platforms.
+
+.. _`Runtime Output Artifacts`:
+
+Runtime Output Artifacts
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+A *runtime* output artifact of a buildsystem target may be:
+
+* The executable file (e.g. ``.exe``) of an executable target
+  created by the :command:`add_executable` command.
+
+* On DLL platforms: the executable file (e.g. ``.dll``) of a shared
+  library target created by the :command:`add_library` command
+  with the ``SHARED`` option.
+
+The :prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` and :prop_tgt:`RUNTIME_OUTPUT_NAME`
+target properties may be used to control runtime output artifact locations
+and names in the build tree.
+
+.. _`Library Output Artifacts`:
+
+Library Output Artifacts
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+A *library* output artifact of a buildsystem target may be:
+
+* The loadable module file (e.g. ``.dll`` or ``.so``) of a module
+  library target created by the :command:`add_library` command
+  with the ``MODULE`` option.
+
+* On non-DLL platforms: the shared library file (e.g. ``.so`` or ``.dylib``)
+  of a shared shared library target created by the :command:`add_library`
+  command with the ``SHARED`` option.
+
+The :prop_tgt:`LIBRARY_OUTPUT_DIRECTORY` and :prop_tgt:`LIBRARY_OUTPUT_NAME`
+target properties may be used to control library output artifact locations
+and names in the build tree.
+
+.. _`Archive Output Artifacts`:
+
+Archive Output Artifacts
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+An *archive* output artifact of a buildsystem target may be:
+
+* The static library file (e.g. ``.lib`` or ``.a``) of a static
+  library target created by the :command:`add_library` command
+  with the ``STATIC`` option.
+
+* On DLL platforms: the import library file (e.g. ``.lib``) of a shared
+  library target created by the :command:`add_library` command
+  with the ``SHARED`` option.  This file is only guaranteed to exist if
+  the library exports at least one unmanaged symbol.
+
+* On DLL platforms: the import library file (e.g. ``.lib``) of an
+  executable target created by the :command:`add_executable` command
+  when its :prop_tgt:`ENABLE_EXPORTS` target property is set.
+
+The :prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY` and :prop_tgt:`ARCHIVE_OUTPUT_NAME`
+target properties may be used to control archive output artifact locations
+and names in the build tree.
+
+Directory-Scoped Commands
+-------------------------
+
+The :command:`target_include_directories`,
+:command:`target_compile_definitions` and
+:command:`target_compile_options` commands have an effect on only one
+target at a time.  The commands :command:`add_definitions`,
+:command:`add_compile_options` and :command:`include_directories` have
+a similar function, but operate at directory scope instead of target
+scope for convenience.
+
+Pseudo Targets
+==============
+
+Some target types do not represent outputs of the buildsystem, but only inputs
+such as external dependencies, aliases or other non-build artifacts.  Pseudo
+targets are not represented in the generated buildsystem.
+
+.. _`Imported Targets`:
+
+Imported Targets
+----------------
+
+An :prop_tgt:`IMPORTED` target represents a pre-existing dependency.  Usually
+such targets are defined by an upstream package and should be treated as
+immutable.  It is not possible to use an :prop_tgt:`IMPORTED` target in the
+left-hand-side of the :command:`target_compile_definitions`,
+:command:`target_include_directories`, :command:`target_compile_options` or
+:command:`target_link_libraries` commands, as that would be an attempt to
+modify it.  :prop_tgt:`IMPORTED` targets are designed to be used only in the
+right-hand-side of those commands.
+
+:prop_tgt:`IMPORTED` targets may have the same usage requirement properties
+populated as binary targets, such as
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
+:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS`,
+:prop_tgt:`INTERFACE_COMPILE_OPTIONS`,
+:prop_tgt:`INTERFACE_LINK_LIBRARIES`, and
+:prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE`.
+
+The :prop_tgt:`LOCATION` may also be read from an IMPORTED target, though there
+is rarely reason to do so.  Commands such as :command:`add_custom_command` can
+transparently use an :prop_tgt:`IMPORTED` :prop_tgt:`EXECUTABLE <TYPE>` target
+as a ``COMMAND`` executable.
+
+The scope of the definition of an :prop_tgt:`IMPORTED` target is the directory
+where it was defined.  It may be accessed and used from subdirectories, but
+not from parent directories or sibling directories.  The scope is similar to
+the scope of a cmake variable.
+
+It is also possible to define a ``GLOBAL`` :prop_tgt:`IMPORTED` target which is
+accessible globally in the buildsystem.
+
+See the :manual:`cmake-packages(7)` manual for more on creating packages
+with :prop_tgt:`IMPORTED` targets.
+
+.. _`Alias Targets`:
+
+Alias Targets
+-------------
+
+An ``ALIAS`` target is a name which may be used interchangably with
+a binary target name in read-only contexts.  A primary use-case for ``ALIAS``
+targets is for example or unit test executables accompanying a library, which
+may be part of the same buildsystem or built separately based on user
+configuration.
+
+.. code-block:: cmake
+
+  add_library(lib1 lib1.cpp)
+  install(TARGETS lib1 EXPORT lib1Export ${dest_args})
+  install(EXPORT lib1Export NAMESPACE Upstream:: ${other_args})
+
+  add_library(Upstream::lib1 ALIAS lib1)
+
+In another directory, we can link unconditionally to the ``Upstream::lib1``
+target, which may be an :prop_tgt:`IMPORTED` target from a package, or an
+``ALIAS`` target if built as part of the same buildsystem.
+
+.. code-block:: cmake
+
+  if (NOT TARGET Upstream::lib1)
+    find_package(lib1 REQUIRED)
+  endif()
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 Upstream::lib1)
+
+``ALIAS`` targets are not mutable, installable or exportable.  They are
+entirely local to the buildsystem description.  A name can be tested for
+whether it is an ``ALIAS`` name by reading the :prop_tgt:`ALIASED_TARGET`
+property from it:
+
+.. code-block:: cmake
+
+  get_target_property(_aliased Upstream::lib1 ALIASED_TARGET)
+  if(_aliased)
+    message(STATUS "The name Upstream::lib1 is an ALIAS for ${_aliased}.")
+  endif()
+
+.. _`Interface Libraries`:
+
+Interface Libraries
+-------------------
+
+An ``INTERFACE`` target has no :prop_tgt:`LOCATION` and is mutable, but is
+otherwise similar to an :prop_tgt:`IMPORTED` target.
+
+It may specify usage requirements such as
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
+:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS`,
+:prop_tgt:`INTERFACE_COMPILE_OPTIONS`,
+:prop_tgt:`INTERFACE_LINK_LIBRARIES`,
+:prop_tgt:`INTERFACE_SOURCES`,
+and :prop_tgt:`INTERFACE_POSITION_INDEPENDENT_CODE`.
+Only the ``INTERFACE`` modes of the :command:`target_include_directories`,
+:command:`target_compile_definitions`, :command:`target_compile_options`,
+:command:`target_sources`, and :command:`target_link_libraries` commands
+may be used with ``INTERFACE`` libraries.
+
+A primary use-case for ``INTERFACE`` libraries is header-only libraries.
+
+.. code-block:: cmake
+
+  add_library(Eigen INTERFACE)
+  target_include_directories(Eigen INTERFACE
+    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+    $<INSTALL_INTERFACE:include/Eigen>
+  )
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 Eigen)
+
+Here, the usage requirements from the ``Eigen`` target are consumed and used
+when compiling, but it has no effect on linking.
+
+Another use-case is to employ an entirely target-focussed design for usage
+requirements:
+
+.. code-block:: cmake
+
+  add_library(pic_on INTERFACE)
+  set_property(TARGET pic_on PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE ON)
+  add_library(pic_off INTERFACE)
+  set_property(TARGET pic_off PROPERTY INTERFACE_POSITION_INDEPENDENT_CODE OFF)
+
+  add_library(enable_rtti INTERFACE)
+  target_compile_options(enable_rtti INTERFACE
+    $<$<OR:$<COMPILER_ID:GNU>,$<COMPILER_ID:Clang>>:-rtti>
+  )
+
+  add_executable(exe1 exe1.cpp)
+  target_link_libraries(exe1 pic_on enable_rtti)
+
+This way, the build specification of ``exe1`` is expressed entirely as linked
+targets, and the complexity of compiler-specific flags is encapsulated in an
+``INTERFACE`` library target.
+
+The properties permitted to be set on or read from an ``INTERFACE`` library
+are:
+
+* Properties matching ``INTERFACE_*``
+* Built-in properties matching ``COMPATIBLE_INTERFACE_*``
+* ``EXPORT_NAME``
+* ``IMPORTED``
+* ``NAME``
+* Properties matching ``MAP_IMPORTED_CONFIG_*``
+
+``INTERFACE`` libraries may be installed and exported.  Any content they refer
+to must be installed separately:
+
+.. code-block:: cmake
+
+  add_library(Eigen INTERFACE)
+  target_include_directories(Eigen INTERFACE
+    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>
+    $<INSTALL_INTERFACE:include/Eigen>
+  )
+
+  install(TARGETS Eigen EXPORT eigenExport)
+  install(EXPORT eigenExport NAMESPACE Upstream::
+    DESTINATION lib/cmake/Eigen
+  )
+  install(FILES
+      ${CMAKE_CURRENT_SOURCE_DIR}/src/eigen.h
+      ${CMAKE_CURRENT_SOURCE_DIR}/src/vector.h
+      ${CMAKE_CURRENT_SOURCE_DIR}/src/matrix.h
+    DESTINATION include/Eigen
+  )
diff --git a/share/cmake-3.6/Help/manual/cmake-commands.7.rst b/share/cmake-3.6/Help/manual/cmake-commands.7.rst
new file mode 100644
index 0000000..d0c2986
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-commands.7.rst
@@ -0,0 +1,155 @@
+.. cmake-manual-description: CMake Language Command Reference
+
+cmake-commands(7)
+*****************
+
+.. only:: html
+
+   .. contents::
+
+Normal Commands
+===============
+
+These commands may be used freely in CMake projects.
+
+.. toctree::
+   :maxdepth: 1
+
+   /command/add_compile_options
+   /command/add_custom_command
+   /command/add_custom_target
+   /command/add_definitions
+   /command/add_dependencies
+   /command/add_executable
+   /command/add_library
+   /command/add_subdirectory
+   /command/add_test
+   /command/aux_source_directory
+   /command/break
+   /command/build_command
+   /command/cmake_host_system_information
+   /command/cmake_minimum_required
+   /command/cmake_parse_arguments
+   /command/cmake_policy
+   /command/configure_file
+   /command/continue
+   /command/create_test_sourcelist
+   /command/define_property
+   /command/elseif
+   /command/else
+   /command/enable_language
+   /command/enable_testing
+   /command/endforeach
+   /command/endfunction
+   /command/endif
+   /command/endmacro
+   /command/endwhile
+   /command/execute_process
+   /command/export
+   /command/file
+   /command/find_file
+   /command/find_library
+   /command/find_package
+   /command/find_path
+   /command/find_program
+   /command/fltk_wrap_ui
+   /command/foreach
+   /command/function
+   /command/get_cmake_property
+   /command/get_directory_property
+   /command/get_filename_component
+   /command/get_property
+   /command/get_source_file_property
+   /command/get_target_property
+   /command/get_test_property
+   /command/if
+   /command/include_directories
+   /command/include_external_msproject
+   /command/include_regular_expression
+   /command/include
+   /command/install
+   /command/link_directories
+   /command/link_libraries
+   /command/list
+   /command/load_cache
+   /command/macro
+   /command/mark_as_advanced
+   /command/math
+   /command/message
+   /command/option
+   /command/project
+   /command/qt_wrap_cpp
+   /command/qt_wrap_ui
+   /command/remove_definitions
+   /command/return
+   /command/separate_arguments
+   /command/set_directory_properties
+   /command/set_property
+   /command/set
+   /command/set_source_files_properties
+   /command/set_target_properties
+   /command/set_tests_properties
+   /command/site_name
+   /command/source_group
+   /command/string
+   /command/target_compile_definitions
+   /command/target_compile_features
+   /command/target_compile_options
+   /command/target_include_directories
+   /command/target_link_libraries
+   /command/target_sources
+   /command/try_compile
+   /command/try_run
+   /command/unset
+   /command/variable_watch
+   /command/while
+
+Deprecated Commands
+===================
+
+These commands are available only for compatibility with older
+versions of CMake.  Do not use them in new code.
+
+.. toctree::
+   :maxdepth: 1
+
+   /command/build_name
+   /command/exec_program
+   /command/export_library_dependencies
+   /command/install_files
+   /command/install_programs
+   /command/install_targets
+   /command/load_command
+   /command/make_directory
+   /command/output_required_files
+   /command/remove
+   /command/subdir_depends
+   /command/subdirs
+   /command/use_mangled_mesa
+   /command/utility_source
+   /command/variable_requires
+   /command/write_file
+
+.. _`CTest Commands`:
+
+CTest Commands
+==============
+
+These commands are available only in ctest scripts.
+
+.. toctree::
+   :maxdepth: 1
+
+   /command/ctest_build
+   /command/ctest_configure
+   /command/ctest_coverage
+   /command/ctest_empty_binary_directory
+   /command/ctest_memcheck
+   /command/ctest_read_custom_files
+   /command/ctest_run_script
+   /command/ctest_sleep
+   /command/ctest_start
+   /command/ctest_submit
+   /command/ctest_test
+   /command/ctest_update
+   /command/ctest_upload
diff --git a/share/cmake-3.6/Help/manual/cmake-compile-features.7.rst b/share/cmake-3.6/Help/manual/cmake-compile-features.7.rst
new file mode 100644
index 0000000..7289e61
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-compile-features.7.rst
@@ -0,0 +1,312 @@
+.. cmake-manual-description: CMake Compile Features Reference
+
+cmake-compile-features(7)
+*************************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+Project source code may depend on, or be conditional on, the availability
+of certain features of the compiler.  There are three use-cases which arise:
+`Compile Feature Requirements`_, `Optional Compile Features`_
+and `Conditional Compilation Options`_.
+
+While features are typically specified in programming language standards,
+CMake provides a primary user interface based on granular handling of
+the features, not the language standard that introduced the feature.
+
+The :prop_gbl:`CMAKE_C_KNOWN_FEATURES` and
+:prop_gbl:`CMAKE_CXX_KNOWN_FEATURES` global properties contain all the
+features known to CMake, regardless of compiler support for the feature.
+The :variable:`CMAKE_C_COMPILE_FEATURES` and
+:variable:`CMAKE_CXX_COMPILE_FEATURES` variables contain all features
+CMake knows are known to the compiler, regardless of language standard
+or compile flags needed to use them.
+
+Features known to CMake are named mostly following the same convention
+as the Clang feature test macros.  The are some exceptions, such as
+CMake using ``cxx_final`` and ``cxx_override`` instead of the single
+``cxx_override_control`` used by Clang.
+
+Compile Feature Requirements
+============================
+
+Compile feature requirements may be specified with the
+:command:`target_compile_features` command.  For example, if a target must
+be compiled with compiler support for the
+:prop_gbl:`cxx_constexpr <CMAKE_CXX_KNOWN_FEATURES>` feature:
+
+.. code-block:: cmake
+
+  add_library(mylib requires_constexpr.cpp)
+  target_compile_features(mylib PRIVATE cxx_constexpr)
+
+In processing the requirement for the ``cxx_constexpr`` feature,
+:manual:`cmake(1)` will ensure that the in-use C++ compiler is capable
+of the feature, and will add any necessary flags such as ``-std=gnu++11``
+to the compile lines of C++ files in the ``mylib`` target.  A
+``FATAL_ERROR`` is issued if the compiler is not capable of the
+feature.
+
+The exact compile flags and language standard are deliberately not part
+of the user interface for this use-case.  CMake will compute the
+appropriate compile flags to use by considering the features specified
+for each target.
+
+Such compile flags are added even if the compiler supports the
+particular feature without the flag. For example, the GNU compiler
+supports variadic templates (with a warning) even if ``-std=gnu++98`` is
+used.  CMake adds the ``-std=gnu++11`` flag if ``cxx_variadic_templates``
+is specified as a requirement.
+
+In the above example, ``mylib`` requires ``cxx_constexpr`` when it
+is built itself, but consumers of ``mylib`` are not required to use a
+compiler which supports ``cxx_constexpr``.  If the interface of
+``mylib`` does require the ``cxx_constexpr`` feature (or any other
+known feature), that may be specified with the ``PUBLIC`` or
+``INTERFACE`` signatures of :command:`target_compile_features`:
+
+.. code-block:: cmake
+
+  add_library(mylib requires_constexpr.cpp)
+  # cxx_constexpr is a usage-requirement
+  target_compile_features(mylib PUBLIC cxx_constexpr)
+
+  # main.cpp will be compiled with -std=gnu++11 on GNU for cxx_constexpr.
+  add_executable(myexe main.cpp)
+  target_link_libraries(myexe mylib)
+
+Feature requirements are evaluated transitively by consuming the link
+implementation.  See :manual:`cmake-buildsystem(7)` for more on
+transitive behavior of build properties and usage requirements.
+
+Because the :prop_tgt:`CXX_EXTENSIONS` target property is ``ON`` by default,
+CMake uses extended variants of language dialects by default, such as
+``-std=gnu++11`` instead of ``-std=c++11``.  That target property may be
+set to ``OFF`` to use the non-extended variant of the dialect flag.  Note
+that because most compilers enable extensions by default, this could
+expose cross-platform bugs in user code or in the headers of third-party
+dependencies.
+
+Optional Compile Features
+=========================
+
+Compile features may be preferred if available, without creating a hard
+requirement.  For example, a library may provides alternative
+implementations depending on whether the ``cxx_variadic_templates``
+feature is available:
+
+.. code-block:: c++
+
+  #if Foo_COMPILER_CXX_VARIADIC_TEMPLATES
+  template<int I, int... Is>
+  struct Interface;
+
+  template<int I>
+  struct Interface<I>
+  {
+    static int accumulate()
+    {
+      return I;
+    }
+  };
+
+  template<int I, int... Is>
+  struct Interface
+  {
+    static int accumulate()
+    {
+      return I + Interface<Is...>::accumulate();
+    }
+  };
+  #else
+  template<int I1, int I2 = 0, int I3 = 0, int I4 = 0>
+  struct Interface
+  {
+    static int accumulate() { return I1 + I2 + I3 + I4; }
+  };
+  #endif
+
+Such an interface depends on using the correct preprocessor defines for the
+compiler features.  CMake can generate a header file containing such
+defines using the :module:`WriteCompilerDetectionHeader` module.  The
+module contains the ``write_compiler_detection_header`` function which
+accepts parameters to control the content of the generated header file:
+
+.. code-block:: cmake
+
+  write_compiler_detection_header(
+    FILE "${CMAKE_CURRENT_BINARY_DIR}/foo_compiler_detection.h"
+    PREFIX Foo
+    COMPILERS GNU
+    FEATURES
+      cxx_variadic_templates
+  )
+
+Such a header file may be used internally in the source code of a project,
+and it may be installed and used in the interface of library code.
+
+For each feature listed in ``FEATURES``, a preprocessor definition
+is created in the header file, and defined to either ``1`` or ``0``.
+
+Additionally, some features call for additional defines, such as the
+``cxx_final`` and ``cxx_override`` features. Rather than being used in
+``#ifdef`` code, the ``final`` keyword is abstracted by a symbol
+which is defined to either ``final``, a compiler-specific equivalent, or
+to empty.  That way, C++ code can be written to unconditionally use the
+symbol, and compiler support determines what it is expanded to:
+
+.. code-block:: c++
+
+  struct Interface {
+    virtual void Execute() = 0;
+  };
+
+  struct Concrete Foo_FINAL {
+    void Execute() Foo_OVERRIDE;
+  };
+
+In this case, ``Foo_FINAL`` will expand to ``final`` if the
+compiler supports the keyword, or to empty otherwise.
+
+In this use-case, the CMake code will wish to enable a particular language
+standard if available from the compiler. The :prop_tgt:`CXX_STANDARD`
+target property variable may be set to the desired language standard
+for a particular target, and the :variable:`CMAKE_CXX_STANDARD` may be
+set to influence all following targets:
+
+.. code-block:: cmake
+
+  write_compiler_detection_header(
+    FILE "${CMAKE_CURRENT_BINARY_DIR}/foo_compiler_detection.h"
+    PREFIX Foo
+    COMPILERS GNU
+    FEATURES
+      cxx_final cxx_override
+  )
+
+  # Includes foo_compiler_detection.h and uses the Foo_FINAL symbol
+  # which will expand to 'final' if the compiler supports the requested
+  # CXX_STANDARD.
+  add_library(foo foo.cpp)
+  set_property(TARGET foo PROPERTY CXX_STANDARD 11)
+
+  # Includes foo_compiler_detection.h and uses the Foo_FINAL symbol
+  # which will expand to 'final' if the compiler supports the feature,
+  # even though CXX_STANDARD is not set explicitly.  The requirement of
+  # cxx_constexpr causes CMake to set CXX_STANDARD internally, which
+  # affects the compile flags.
+  add_library(foo_impl foo_impl.cpp)
+  target_compile_features(foo_impl PRIVATE cxx_constexpr)
+
+The ``write_compiler_detection_header`` function also creates compatibility
+code for other features which have standard equivalents.  For example, the
+``cxx_static_assert`` feature is emulated with a template and abstracted
+via the ``<PREFIX>_STATIC_ASSERT`` and ``<PREFIX>_STATIC_ASSERT_MSG``
+function-macros.
+
+Conditional Compilation Options
+===============================
+
+Libraries may provide entirely different header files depending on
+requested compiler features.
+
+For example, a header at ``with_variadics/interface.h`` may contain:
+
+.. code-block:: c++
+
+  template<int I, int... Is>
+  struct Interface;
+
+  template<int I>
+  struct Interface<I>
+  {
+    static int accumulate()
+    {
+      return I;
+    }
+  };
+
+  template<int I, int... Is>
+  struct Interface
+  {
+    static int accumulate()
+    {
+      return I + Interface<Is...>::accumulate();
+    }
+  };
+
+while a header at ``no_variadics/interface.h`` may contain:
+
+.. code-block:: c++
+
+  template<int I1, int I2 = 0, int I3 = 0, int I4 = 0>
+  struct Interface
+  {
+    static int accumulate() { return I1 + I2 + I3 + I4; }
+  };
+
+It would be possible to write a abstraction ``interface.h`` header
+containing something like:
+
+.. code-block:: c++
+
+  #include "foo_compiler_detection.h"
+  #if Foo_COMPILER_CXX_VARIADIC_TEMPLATES
+  #include "with_variadics/interface.h"
+  #else
+  #include "no_variadics/interface.h"
+  #endif
+
+However this could be unmaintainable if there are many files to
+abstract. What is needed is to use alternative include directories
+depending on the compiler capabilities.
+
+CMake provides a ``COMPILE_FEATURES``
+:manual:`generator expression <cmake-generator-expressions(7)>` to implement
+such conditions.  This may be used with the build-property commands such as
+:command:`target_include_directories` and :command:`target_link_libraries`
+to set the appropriate :manual:`buildsystem <cmake-buildsystem(7)>`
+properties:
+
+.. code-block:: cmake
+
+  add_library(foo INTERFACE)
+  set(with_variadics ${CMAKE_CURRENT_SOURCE_DIR}/with_variadics)
+  set(no_variadics ${CMAKE_CURRENT_SOURCE_DIR}/no_variadics)
+  target_include_directories(foo
+    INTERFACE
+      "$<$<COMPILE_FEATURES:cxx_variadic_templates>:${with_variadics}>"
+      "$<$<NOT:$<COMPILE_FEATURES:cxx_variadic_templates>>:${no_variadics}>"
+    )
+
+Consuming code then simply links to the ``foo`` target as usual and uses
+the feature-appropriate include directory
+
+.. code-block:: cmake
+
+  add_executable(consumer_with consumer_with.cpp)
+  target_link_libraries(consumer_with foo)
+  set_property(TARGET consumer_with CXX_STANDARD 11)
+
+  add_executable(consumer_no consumer_no.cpp)
+  target_link_libraries(consumer_no foo)
+
+Supported Compilers
+===================
+
+CMake is currently aware of the :prop_tgt:`language standards <CXX_STANDARD>`
+and :prop_gbl:`compile features <CMAKE_CXX_KNOWN_FEATURES>` available from
+the following :variable:`compiler ids <CMAKE_<LANG>_COMPILER_ID>` as of the
+versions specified for each:
+
+* ``AppleClang``: Apple Clang for Xcode versions 4.4 though 6.2.
+* ``Clang``: Clang compiler versions 2.9 through 3.4.
+* ``GNU``: GNU compiler versions 4.4 through 5.0.
+* ``MSVC``: Microsoft Visual Studio versions 2010 through 2015.
+* ``SunPro``: Oracle SolarisStudio version 12.4.
+* ``Intel``: Intel compiler versions 12.1 through 16.0 on UNIX platforms.
diff --git a/share/cmake-3.6/Help/manual/cmake-developer.7.rst b/share/cmake-3.6/Help/manual/cmake-developer.7.rst
new file mode 100644
index 0000000..7bfdcad
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-developer.7.rst
@@ -0,0 +1,1007 @@
+.. cmake-manual-description: CMake Developer Reference
+
+cmake-developer(7)
+******************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+This manual is intended for reference by developers modifying the CMake
+source tree itself.
+
+
+Permitted C++ Subset
+====================
+
+CMake is required to build with ancient C++ compilers and standard library
+implementations.  Some common C++ constructs may not be used in CMake in order
+to build with such toolchains.
+
+std::auto_ptr
+-------------
+
+Some implementations have a ``std::auto_ptr`` which can not be used as a
+return value from a function. ``std::auto_ptr`` may not be used. Use
+``cmsys::auto_ptr`` instead.
+
+size_t
+------
+
+Various implementations have differing implementation of ``size_t``.  When
+assigning the result of ``.size()`` on a container for example, the result
+should be assigned to ``size_t`` not to ``std::size_t``, ``unsigned int`` or
+similar types.
+
+Adding Compile Features
+=======================
+
+CMake reports an error if a compiler whose features are known does not report
+support for a particular requested feature.  A compiler is considered to have
+known features if it reports support for at least one feature.
+
+When adding a new compile feature to CMake, it is therefore necessary to list
+support for the feature for all CompilerIds which already have one or more
+feature supported, if the new feature is available for any version of the
+compiler.
+
+When adding the first supported feature to a particular CompilerId, it is
+necessary to list support for all features known to cmake (See
+:variable:`CMAKE_C_COMPILE_FEATURES` and
+:variable:`CMAKE_CXX_COMPILE_FEATURES` as appropriate), where available for
+the compiler.  Ensure that the ``CMAKE_<LANG>_STANDARD_DEFAULT`` is set to
+the computed internal variable ``CMAKE_<LANG>_STANDARD_COMPUTED_DEFAULT``
+for compiler versions which should be supported.
+
+It is sensible to record the features for the most recent version of a
+particular CompilerId first, and then work backwards.  It is sensible to
+try to create a continuous range of versions of feature releases of the
+compiler.  Gaps in the range indicate incorrect features recorded for
+intermediate releases.
+
+Generally, features are made available for a particular version if the
+compiler vendor documents availability of the feature with that
+version.  Note that sometimes partially implemented features appear to
+be functional in previous releases (such as ``cxx_constexpr`` in GNU 4.6,
+though availability is documented in GNU 4.7), and sometimes compiler vendors
+document availability of features, though supporting infrastructure is
+not available (such as ``__has_feature(cxx_generic_lambdas)`` indicating
+non-availability in Clang 3.4, though it is documented as available, and
+fixed in Clang 3.5).  Similar cases for other compilers and versions
+need to be investigated when extending CMake to support them.
+
+When a vendor releases a new version of a known compiler which supports
+a previously unsupported feature, and there are already known features for
+that compiler, the feature should be listed as supported in CMake for
+that version of the compiler as soon as reasonably possible.
+
+Standard-specific/compiler-specific variables such
+``CMAKE_CXX98_COMPILE_FEATURES`` are deliberately not documented.  They
+only exist for the compiler-specific implementation of adding the ``-std``
+compile flag for compilers which need that.
+
+Help
+====
+
+The ``Help`` directory contains CMake help manual source files.
+They are written using the `reStructuredText`_ markup syntax and
+processed by `Sphinx`_ to generate the CMake help manuals.
+
+.. _`reStructuredText`: http://docutils.sourceforge.net/docs/ref/rst/introduction.html
+.. _`Sphinx`: http://sphinx-doc.org
+
+Markup Constructs
+-----------------
+
+In addition to using Sphinx to generate the CMake help manuals, we
+also use a C++-implemented document processor to print documents for
+the ``--help-*`` command-line help options.  It supports a subset of
+reStructuredText markup.  When authoring or modifying documents,
+please verify that the command-line help looks good in addition to the
+Sphinx-generated html and man pages.
+
+The command-line help processor supports the following constructs
+defined by reStructuredText, Sphinx, and a CMake extension to Sphinx.
+
+..
+ Note: This list must be kept consistent with the cmRST implementation.
+
+CMake Domain directives
+ Directives defined in the `CMake Domain`_ for defining CMake
+ documentation objects are printed in command-line help output as
+ if the lines were normal paragraph text with interpretation.
+
+CMake Domain interpreted text roles
+ Interpreted text roles defined in the `CMake Domain`_ for
+ cross-referencing CMake documentation objects are replaced by their
+ link text in command-line help output.  Other roles are printed
+ literally and not processed.
+
+``code-block`` directive
+ Add a literal code block without interpretation.  The command-line
+ help processor prints the block content without the leading directive
+ line and with common indentation replaced by one space.
+
+``include`` directive
+ Include another document source file.  The command-line help
+ processor prints the included document inline with the referencing
+ document.
+
+literal block after ``::``
+ A paragraph ending in ``::`` followed by a blank line treats
+ the following indented block as literal text without interpretation.
+ The command-line help processor prints the ``::`` literally and
+ prints the block content with common indentation replaced by one
+ space.
+
+``note`` directive
+ Call out a side note.  The command-line help processor prints the
+ block content as if the lines were normal paragraph text with
+ interpretation.
+
+``parsed-literal`` directive
+ Add a literal block with markup interpretation.  The command-line
+ help processor prints the block content without the leading
+ directive line and with common indentation replaced by one space.
+
+``productionlist`` directive
+ Render context-free grammar productions.  The command-line help
+ processor prints the block content as if the lines were normal
+ paragraph text with interpretation.
+
+``replace`` directive
+ Define a ``|substitution|`` replacement.
+ The command-line help processor requires a substitution replacement
+ to be defined before it is referenced.
+
+``|substitution|`` reference
+ Reference a substitution replacement previously defined by
+ the ``replace`` directive.  The command-line help processor
+ performs the substitution and replaces all newlines in the
+ replacement text with spaces.
+
+``toctree`` directive
+ Include other document sources in the Table-of-Contents
+ document tree.  The command-line help processor prints
+ the referenced documents inline as part of the referencing
+ document.
+
+Inline markup constructs not listed above are printed literally in the
+command-line help output.  We prefer to use inline markup constructs that
+look correct in source form, so avoid use of \\-escapes in favor of inline
+literals when possible.
+
+Explicit markup blocks not matching directives listed above are removed from
+command-line help output.  Do not use them, except for plain ``..`` comments
+that are removed by Sphinx too.
+
+Note that nested indentation of blocks is not recognized by the
+command-line help processor.  Therefore:
+
+* Explicit markup blocks are recognized only when not indented
+  inside other blocks.
+
+* Literal blocks after paragraphs ending in ``::`` but not
+  at the top indentation level may consume all indented lines
+  following them.
+
+Try to avoid these cases in practice.
+
+CMake Domain
+------------
+
+CMake adds a `Sphinx Domain`_ called ``cmake``, also called the
+"CMake Domain".  It defines several "object" types for CMake
+documentation:
+
+``command``
+ A CMake language command.
+
+``generator``
+ A CMake native build system generator.
+ See the :manual:`cmake(1)` command-line tool's ``-G`` option.
+
+``manual``
+ A CMake manual page, like this :manual:`cmake-developer(7)` manual.
+
+``module``
+ A CMake module.
+ See the :manual:`cmake-modules(7)` manual
+ and the :command:`include` command.
+
+``policy``
+ A CMake policy.
+ See the :manual:`cmake-policies(7)` manual
+ and the :command:`cmake_policy` command.
+
+``prop_cache, prop_dir, prop_gbl, prop_sf, prop_inst, prop_test, prop_tgt``
+ A CMake cache, directory, global, source file, installed file, test,
+ or target property, respectively.  See the :manual:`cmake-properties(7)`
+ manual and the :command:`set_property` command.
+
+``variable``
+ A CMake language variable.
+ See the :manual:`cmake-variables(7)` manual
+ and the :command:`set` command.
+
+Documentation objects in the CMake Domain come from two sources.
+First, the CMake extension to Sphinx transforms every document named
+with the form ``Help/<type>/<file-name>.rst`` to a domain object with
+type ``<type>``.  The object name is extracted from the document title,
+which is expected to be of the form::
+
+ <object-name>
+ -------------
+
+and to appear at or near the top of the ``.rst`` file before any other
+lines starting in a letter, digit, or ``<``.  If no such title appears
+literally in the ``.rst`` file, the object name is the ``<file-name>``.
+If a title does appear, it is expected that ``<file-name>`` is equal
+to ``<object-name>`` with any ``<`` and ``>`` characters removed.
+
+Second, the CMake Domain provides directives to define objects inside
+other documents:
+
+.. code-block:: rst
+
+ .. command:: <command-name>
+
+  This indented block documents <command-name>.
+
+ .. variable:: <variable-name>
+
+  This indented block documents <variable-name>.
+
+Object types for which no directive is available must be defined using
+the first approach above.
+
+.. _`Sphinx Domain`: http://sphinx-doc.org/domains.html
+
+Cross-References
+----------------
+
+Sphinx uses reStructuredText interpreted text roles to provide
+cross-reference syntax.  The `CMake Domain`_ provides for each
+domain object type a role of the same name to cross-reference it.
+CMake Domain roles are inline markup of the forms::
+
+ :type:`name`
+ :type:`text <name>`
+
+where ``type`` is the domain object type and ``name`` is the
+domain object name.  In the first form the link text will be
+``name`` (or ``name()`` if the type is ``command``) and in
+the second form the link text will be the explicit ``text``.
+For example, the code:
+
+.. code-block:: rst
+
+ * The :command:`list` command.
+ * The :command:`list(APPEND)` sub-command.
+ * The :command:`list() command <list>`.
+ * The :command:`list(APPEND) sub-command <list>`.
+ * The :variable:`CMAKE_VERSION` variable.
+ * The :prop_tgt:`OUTPUT_NAME_<CONFIG>` target property.
+
+produces:
+
+* The :command:`list` command.
+* The :command:`list(APPEND)` sub-command.
+* The :command:`list() command <list>`.
+* The :command:`list(APPEND) sub-command <list>`.
+* The :variable:`CMAKE_VERSION` variable.
+* The :prop_tgt:`OUTPUT_NAME_<CONFIG>` target property.
+
+Note that CMake Domain roles differ from Sphinx and reStructuredText
+convention in that the form ``a<b>``, without a space preceding ``<``,
+is interpreted as a name instead of link text with an explicit target.
+This is necessary because we use ``<placeholders>`` frequently in
+object names like ``OUTPUT_NAME_<CONFIG>``.  The form ``a <b>``,
+with a space preceding ``<``, is still interpreted as a link text
+with an explicit target.
+
+Style
+-----
+
+Style: Section Headers
+^^^^^^^^^^^^^^^^^^^^^^
+
+When marking section titles, make the section decoration line as long as
+the title text.  Use only a line below the title, not above. For
+example:
+
+.. code-block:: rst
+
+  Title Text
+  ----------
+
+Capitalize the first letter of each non-minor word in the title.
+
+The section header underline character hierarchy is
+
+* ``#``: Manual group (part) in the master document
+* ``*``: Manual (chapter) title
+* ``=``: Section within a manual
+* ``-``: Subsection or `CMake Domain`_ object document title
+* ``^``: Subsubsection or `CMake Domain`_ object document section
+* ``"``: Paragraph or `CMake Domain`_ object document subsection
+
+Style: Whitespace
+^^^^^^^^^^^^^^^^^
+
+Use two spaces for indentation.  Use two spaces between sentences in
+prose.
+
+Style: Line Length
+^^^^^^^^^^^^^^^^^^
+
+Prefer to restrict the width of lines to 75-80 columns.  This is not a
+hard restriction, but writing new paragraphs wrapped at 75 columns
+allows space for adding minor content without significant re-wrapping of
+content.
+
+Style: Prose
+^^^^^^^^^^^^
+
+Use American English spellings in prose.
+
+Style: Starting Literal Blocks
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Prefer to mark the start of literal blocks with ``::`` at the end of
+the preceding paragraph. In cases where the following block gets
+a ``code-block`` marker, put a single ``:`` at the end of the preceding
+paragraph.
+
+Style: CMake Command Signatures
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Command signatures should be marked up as plain literal blocks, not as
+cmake ``code-blocks``.
+
+Signatures are separated from preceding content by a section header.
+That is, use:
+
+.. code-block:: rst
+
+  ... preceding paragraph.
+
+  Normal Libraries
+  ^^^^^^^^^^^^^^^^
+
+  ::
+
+    add_library(<lib> ...)
+
+  This signature is used for ...
+
+Signatures of commands should wrap optional parts with square brackets,
+and should mark list of optional arguments with an ellipsis (``...``).
+Elements of the signature which are specified by the user should be
+specified with angle brackets, and may be referred to in prose using
+``inline-literal`` syntax.
+
+Style: Boolean Constants
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Use "``OFF``" and "``ON``" for boolean values which can be modified by
+the user, such as :prop_tgt:`POSITION_INDEPENDENT_CODE`. Such properties
+may be "enabled" and "disabled". Use "``True``" and "``False``" for
+inherent values which can't be modified after being set, such as the
+:prop_tgt:`IMPORTED` property of a build target.
+
+Style: Inline Literals
+^^^^^^^^^^^^^^^^^^^^^^
+
+Mark up references to keywords in signatures, file names, and other
+technical terms with ``inline-literal`` syntax, for example:
+
+.. code-block:: rst
+
+  If ``WIN32`` is used with :command:`add_executable`, the
+  :prop_tgt:`WIN32_EXECUTABLE` target property is enabled. That command
+  creates the file ``<name>.exe`` on Windows.
+
+Style: Cross-References
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Mark up linkable references as links, including repeats.
+An alternative, which is used by wikipedia
+(`<http://en.wikipedia.org/wiki/WP:REPEATLINK>`_),
+is to link to a reference only once per article. That style is not used
+in CMake documentation.
+
+Style: Referencing CMake Concepts
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If referring to a concept which corresponds to a property, and that
+concept is described in a high-level manual, prefer to link to the
+manual section instead of the property. For example:
+
+.. code-block:: rst
+
+  This command creates an :ref:`Imported Target <Imported Targets>`.
+
+instead of:
+
+.. code-block:: rst
+
+  This command creates an :prop_tgt:`IMPORTED` target.
+
+The latter should be used only when referring specifically to the
+property.
+
+References to manual sections are not automatically created by creating
+a section, but code such as:
+
+.. code-block:: rst
+
+  .. _`Imported Targets`:
+
+creates a suitable anchor.  Use an anchor name which matches the name
+of the corresponding section.  Refer to the anchor using a
+cross-reference with specified text.
+
+Imported Targets need the ``IMPORTED`` term marked up with care in
+particular because the term may refer to a command keyword
+(``IMPORTED``), a target property (:prop_tgt:`IMPORTED`), or a
+concept (:ref:`Imported Targets`).
+
+Where a property, command or variable is related conceptually to others,
+by for example, being related to the buildsystem description, generator
+expressions or Qt, each relevant property, command or variable should
+link to the primary manual, which provides high-level information.  Only
+particular information relating to the command should be in the
+documentation of the command.
+
+Style: Referencing CMake Domain Objects
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When referring to `CMake Domain`_ objects such as properties, variables,
+commands etc, prefer to link to the target object and follow that with
+the type of object it is.  For example:
+
+.. code-block:: rst
+
+  Set the :prop_tgt:`AUTOMOC` target property to ``ON``.
+
+Instead of
+
+.. code-block:: rst
+
+  Set the target property :prop_tgt:`AUTOMOC` to ``ON``.
+
+The ``policy`` directive is an exception, and the type us usually
+referred to before the link:
+
+.. code-block:: rst
+
+  If policy :prop_tgt:`CMP0022` is set to ``NEW`` the behavior is ...
+
+However, markup self-references with ``inline-literal`` syntax.
+For example, within the :command:`add_executable` command
+documentation, use
+
+.. code-block:: rst
+
+  ``add_executable``
+
+not
+
+.. code-block:: rst
+
+  :command:`add_executable`
+
+which is used elsewhere.
+
+Modules
+=======
+
+The ``Modules`` directory contains CMake-language ``.cmake`` module files.
+
+Module Documentation
+--------------------
+
+To document CMake module ``Modules/<module-name>.cmake``, modify
+``Help/manual/cmake-modules.7.rst`` to reference the module in the
+``toctree`` directive, in sorted order, as::
+
+ /module/<module-name>
+
+Then add the module document file ``Help/module/<module-name>.rst``
+containing just the line::
+
+ .. cmake-module:: ../../Modules/<module-name>.cmake
+
+The ``cmake-module`` directive will scan the module file to extract
+reStructuredText markup from comment blocks that start in ``.rst:``.
+Add to the top of ``Modules/<module-name>.cmake`` a
+:ref:`Line Comment` block of the form:
+
+.. code-block:: cmake
+
+ #.rst:
+ # <module-name>
+ # -------------
+ #
+ # <reStructuredText documentation of module>
+
+or a :ref:`Bracket Comment` of the form:
+
+.. code-block:: cmake
+
+ #[[.rst:
+ <module-name>
+ -------------
+
+ <reStructuredText documentation of module>
+ #]]
+
+Any number of ``=`` may be used in the opening and closing brackets
+as long as they match.  Content on the line containing the closing
+bracket is excluded if and only if the line starts in ``#``.
+
+Additional such ``.rst:`` comments may appear anywhere in the module file.
+All such comments must start with ``#`` in the first column.
+
+For example, a ``Modules/Findxxx.cmake`` module may contain:
+
+.. code-block:: cmake
+
+ #.rst:
+ # FindXxx
+ # -------
+ #
+ # This is a cool module.
+ # This module does really cool stuff.
+ # It can do even more than you think.
+ #
+ # It even needs two paragraphs to tell you about it.
+ # And it defines the following variables:
+ #
+ # * VAR_COOL: this is great isn't it?
+ # * VAR_REALLY_COOL: cool right?
+
+ <code>
+
+ #[========================================[.rst:
+ .. command:: xxx_do_something
+
+  This command does something for Xxx::
+
+   xxx_do_something(some arguments)
+ #]========================================]
+ macro(xxx_do_something)
+   <code>
+ endmacro()
+
+After the top documentation block, leave a *BLANK* line, and then add a
+copyright and licence notice block like this one (change only the year
+range and name)
+
+.. code-block:: cmake
+
+  #=============================================================================
+  # Copyright 2009-2011 Your Name
+  #
+  # Distributed under the OSI-approved BSD License (the "License");
+  # see accompanying file Copyright.txt for details.
+  #
+  # This software is distributed WITHOUT ANY WARRANTY; without even the
+  # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  # See the License for more information.
+  #=============================================================================
+  # (To distribute this file outside of CMake, substitute the full
+  #  License text for the above reference.)
+
+Test the documentation formatting by running
+``cmake --help-module <module-name>``, and also by enabling the
+``SPHINX_HTML`` and ``SPHINX_MAN`` options to build the documentation.
+Edit the comments until generated documentation looks satisfactory.  To
+have a .cmake file in this directory NOT show up in the modules
+documentation, simply leave out the ``Help/module/<module-name>.rst``
+file and the ``Help/manual/cmake-modules.7.rst`` toctree entry.
+
+.. _`Find Modules`:
+
+Find Modules
+------------
+
+A "find module" is a ``Modules/Find<package>.cmake`` file to be loaded
+by the :command:`find_package` command when invoked for ``<package>``.
+
+The primary task of a find module is to determine whether a package
+exists on the system, set the ``<package>_FOUND`` variable to reflect
+this and provide any variables, macros and imported targets required to
+use the package.  A find module is useful in cases where an upstream
+library does not provide a
+:ref:`config file package <Config File Packages>`.
+
+The traditional approach is to use variables for everything, including
+libraries and executables: see the `Standard Variable Names`_ section
+below.  This is what most of the existing find modules provided by CMake
+do.
+
+The more modern approach is to behave as much like
+:ref:`config file packages <Config File Packages>` files as possible, by
+providing :ref:`imported target <Imported targets>`.  This has the advantage
+of propagating :ref:`Target Usage Requirements` to consumers.
+
+In either case (or even when providing both variables and imported
+targets), find modules should provide backwards compatibility with old
+versions that had the same name.
+
+A FindFoo.cmake module will typically be loaded by the command::
+
+  find_package(Foo [major[.minor[.patch[.tweak]]]]
+               [EXACT] [QUIET] [REQUIRED]
+               [[COMPONENTS] [components...]]
+               [OPTIONAL_COMPONENTS components...]
+               [NO_POLICY_SCOPE])
+
+See the :command:`find_package` documentation for details on what
+variables are set for the find module.  Most of these are dealt with by
+using :module:`FindPackageHandleStandardArgs`.
+
+Briefly, the module should only locate versions of the package
+compatible with the requested version, as described by the
+``Foo_FIND_VERSION`` family of variables.  If ``Foo_FIND_QUIETLY`` is
+set to true, it should avoid printing messages, including anything
+complaining about the package not being found.  If ``Foo_FIND_REQUIRED``
+is set to true, the module should issue a ``FATAL_ERROR`` if the package
+cannot be found.  If neither are set to true, it should print a
+non-fatal message if it cannot find the package.
+
+Packages that find multiple semi-independent parts (like bundles of
+libraries) should search for the components listed in
+``Foo_FIND_COMPONENTS`` if it is set , and only set ``Foo_FOUND`` to
+true if for each searched-for component ``<c>`` that was not found,
+``Foo_FIND_REQUIRED_<c>`` is not set to true.  The ``HANDLE_COMPONENTS``
+argument of ``find_package_handle_standard_args()`` can be used to
+implement this.
+
+If ``Foo_FIND_COMPONENTS`` is not set, which modules are searched for
+and required is up to the find module, but should be documented.
+
+For internal implementation, it is a generally accepted convention that
+variables starting with underscore are for temporary use only.
+
+Like all modules, find modules should be properly documented.  To add a
+module to the CMake documentation, follow the steps in the `Module
+Documentation`_ section above.
+
+
+
+Standard Variable Names
+^^^^^^^^^^^^^^^^^^^^^^^
+
+For a ``FindXxx.cmake`` module that takes the approach of setting
+variables (either instead of or in addition to creating imported
+targets), the following variable names should be used to keep things
+consistent between find modules.  Note that all variables start with
+``Xxx_`` to make sure they do not interfere with other find modules; the
+same consideration applies to macros, functions and imported targets.
+
+``Xxx_INCLUDE_DIRS``
+  The final set of include directories listed in one variable for use by
+  client code.  This should not be a cache entry.
+
+``Xxx_LIBRARIES``
+  The libraries to link against to use Xxx. These should include full
+  paths.  This should not be a cache entry.
+
+``Xxx_DEFINITIONS``
+  Definitions to use when compiling code that uses Xxx. This really
+  shouldn't include options such as ``-DHAS_JPEG`` that a client
+  source-code file uses to decide whether to ``#include <jpeg.h>``
+
+``Xxx_EXECUTABLE``
+  Where to find the Xxx tool.
+
+``Xxx_Yyy_EXECUTABLE``
+  Where to find the Yyy tool that comes with Xxx.
+
+``Xxx_LIBRARY_DIRS``
+  Optionally, the final set of library directories listed in one
+  variable for use by client code.  This should not be a cache entry.
+
+``Xxx_ROOT_DIR``
+  Where to find the base directory of Xxx.
+
+``Xxx_VERSION_Yy``
+  Expect Version Yy if true. Make sure at most one of these is ever true.
+
+``Xxx_WRAP_Yy``
+  If False, do not try to use the relevant CMake wrapping command.
+
+``Xxx_Yy_FOUND``
+  If False, optional Yy part of Xxx system is not available.
+
+``Xxx_FOUND``
+  Set to false, or undefined, if we haven't found, or don't want to use
+  Xxx.
+
+``Xxx_NOT_FOUND_MESSAGE``
+  Should be set by config-files in the case that it has set
+  ``Xxx_FOUND`` to FALSE.  The contained message will be printed by the
+  :command:`find_package` command and by
+  ``find_package_handle_standard_args()`` to inform the user about the
+  problem.
+
+``Xxx_RUNTIME_LIBRARY_DIRS``
+  Optionally, the runtime library search path for use when running an
+  executable linked to shared libraries.  The list should be used by
+  user code to create the ``PATH`` on windows or ``LD_LIBRARY_PATH`` on
+  UNIX.  This should not be a cache entry.
+
+``Xxx_VERSION``
+  The full version string of the package found, if any.  Note that many
+  existing modules provide ``Xxx_VERSION_STRING`` instead.
+
+``Xxx_VERSION_MAJOR``
+  The major version of the package found, if any.
+
+``Xxx_VERSION_MINOR``
+  The minor version of the package found, if any.
+
+``Xxx_VERSION_PATCH``
+  The patch version of the package found, if any.
+
+The following names should not usually be used in CMakeLists.txt files, but
+are typically cache variables for users to edit and control the
+behaviour of find modules (like entering the path to a library manually)
+
+``Xxx_LIBRARY``
+  The path of the Xxx library (as used with :command:`find_library`, for
+  example).
+
+``Xxx_Yy_LIBRARY``
+  The path of the Yy library that is part of the Xxx system. It may or
+  may not be required to use Xxx.
+
+``Xxx_INCLUDE_DIR``
+  Where to find headers for using the Xxx library.
+
+``Xxx_Yy_INCLUDE_DIR``
+  Where to find headers for using the Yy library of the Xxx system.
+
+To prevent users being overwhelmed with settings to configure, try to
+keep as many options as possible out of the cache, leaving at least one
+option which can be used to disable use of the module, or locate a
+not-found library (e.g. ``Xxx_ROOT_DIR``).  For the same reason, mark
+most cache options as advanced.  For packages which provide both debug
+and release binaries, it is common to create cache variables with a
+``_LIBRARY_<CONFIG>`` suffix, such as ``Foo_LIBRARY_RELEASE`` and
+``Foo_LIBRARY_DEBUG``.
+
+While these are the standard variable names, you should provide
+backwards compatibility for any old names that were actually in use.
+Make sure you comment them as deprecated, so that no-one starts using
+them.
+
+
+
+A Sample Find Module
+^^^^^^^^^^^^^^^^^^^^
+
+We will describe how to create a simple find module for a library
+``Foo``.
+
+The first thing that is needed is documentation.  CMake's documentation
+system requires you to start the file with a documentation marker and
+the name of the module.  You should follow this with a simple statement
+of what the module does.
+
+.. code-block:: cmake
+
+  #.rst:
+  # FindFoo
+  # -------
+  #
+  # Finds the Foo library
+  #
+
+More description may be required for some packages.  If there are
+caveats or other details users of the module should be aware of, you can
+add further paragraphs below this.  Then you need to document what
+variables and imported targets are set by the module, such as
+
+.. code-block:: cmake
+
+  # This will define the following variables::
+  #
+  #   Foo_FOUND    - True if the system has the Foo library
+  #   Foo_VERSION  - The version of the Foo library which was found
+  #
+  # and the following imported targets::
+  #
+  #   Foo::Foo   - The Foo library
+
+If the package provides any macros, they should be listed here, but can
+be documented where they are defined.  See the `Module
+Documentation`_ section above for more details.
+
+After the documentation, leave a blank line, and then add a copyright and
+licence notice block
+
+.. code-block:: cmake
+
+  #=============================================================================
+  # Copyright 2009-2011 Your Name
+  #
+  # Distributed under the OSI-approved BSD License (the "License");
+  # see accompanying file Copyright.txt for details.
+  #
+  # This software is distributed WITHOUT ANY WARRANTY; without even the
+  # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  # See the License for more information.
+  #=============================================================================
+  # (To distribute this file outside of CMake, substitute the full
+  #  License text for the above reference.)
+
+Now the actual libraries and so on have to be found.  The code here will
+obviously vary from module to module (dealing with that, after all, is the
+point of find modules), but there tends to be a common pattern for libraries.
+
+First, we try to use ``pkg-config`` to find the library.  Note that we
+cannot rely on this, as it may not be available, but it provides a good
+starting point.
+
+.. code-block:: cmake
+
+  find_package(PkgConfig)
+  pkg_check_modules(PC_Foo QUIET Foo)
+
+This should define some variables starting ``PC_Foo_`` that contain the
+information from the ``Foo.pc`` file.
+
+Now we need to find the libraries and include files; we use the
+information from ``pkg-config`` to provide hints to CMake about where to
+look.
+
+.. code-block:: cmake
+
+  find_path(Foo_INCLUDE_DIR
+    NAMES foo.h
+    PATHS ${PC_Foo_INCLUDE_DIRS}
+    PATH_SUFFIXES Foo
+  )
+  find_library(Foo_LIBRARY
+    NAMES foo
+    PATHS ${PC_Foo_LIBRARY_DIRS}
+  )
+
+If you have a good way of getting the version (from a header file, for
+example), you can use that information to set ``Foo_VERSION`` (although
+note that find modules have traditionally used ``Foo_VERSION_STRING``,
+so you may want to set both).  Otherwise, attempt to use the information
+from ``pkg-config``
+
+.. code-block:: cmake
+
+  set(Foo_VERSION ${PC_Foo_VERSION})
+
+Now we can use :module:`FindPackageHandleStandardArgs` to do most of the
+rest of the work for us
+
+.. code-block:: cmake
+
+  include(FindPackageHandleStandardArgs)
+  find_package_handle_standard_args(Foo
+    FOUND_VAR Foo_FOUND
+    REQUIRED_VARS
+      Foo_LIBRARY
+      Foo_INCLUDE_DIR
+    VERSION_VAR Foo_VERSION
+  )
+
+This will check that the ``REQUIRED_VARS`` contain values (that do not
+end in ``-NOTFOUND``) and set ``Foo_FOUND`` appropriately.  It will also
+cache those values.  If ``Foo_VERSION`` is set, and a required version
+was passed to :command:`find_package`, it will check the requested version
+against the one in ``Foo_VERSION``.  It will also print messages as
+appropriate; note that if the package was found, it will print the
+contents of the first required variable to indicate where it was found.
+
+At this point, we have to provide a way for users of the find module to
+link to the library or libraries that were found.  There are two
+approaches, as discussed in the `Find Modules`_ section above.  The
+traditional variable approach looks like
+
+.. code-block:: cmake
+
+  if(Foo_FOUND)
+    set(Foo_LIBRARIES ${Foo_LIBRARY})
+    set(Foo_INCLUDE_DIRS ${Foo_INCLUDE_DIR})
+    set(Foo_DEFINITIONS ${PC_Foo_CFLAGS_OTHER})
+  endif()
+
+If more than one library was found, all of them should be included in
+these variables (see the `Standard Variable Names`_ section for more
+information).
+
+When providing imported targets, these should be namespaced (hence the
+``Foo::`` prefix); CMake will recognize that values passed to
+:command:`target_link_libraries` that contain ``::`` in their name are
+supposed to be imported targets (rather than just library names), and
+will produce appropriate diagnostic messages if that target does not
+exist (see policy :policy:`CMP0028`).
+
+.. code-block:: cmake
+
+  if(Foo_FOUND AND NOT TARGET Foo::Foo)
+    add_library(Foo::Foo UNKNOWN IMPORTED)
+    set_target_properties(Foo::Foo PROPERTIES
+      IMPORTED_LOCATION "${Foo_LIBRARY}"
+      INTERFACE_COMPILE_OPTIONS "${PC_Foo_CFLAGS_OTHER}"
+      INTERFACE_INCLUDE_DIRECTORIES "${Foo_INCLUDE_DIR}"
+    )
+  endif()
+
+One thing to note about this is that the ``INTERFACE_INCLUDE_DIRECTORIES`` and
+similar properties should only contain information about the target itself, and
+not any of its dependencies.  Instead, those dependencies should also be
+targets, and CMake should be told that they are dependencies of this target.
+CMake will then combine all the necessary information automatically.
+
+The type of the :prop_tgt:`IMPORTED` target created in the
+:command:`add_library` command can always be specified as ``UNKNOWN``
+type.  This simplifies the code in cases where static or shared variants may
+be found, and CMake will determine the type by inspecting the files.
+
+If the library is available with multiple configurations, the
+:prop_tgt:`IMPORTED_CONFIGURATIONS` target property should also be
+populated:
+
+.. code-block:: cmake
+
+  if(Foo_FOUND)
+    if (NOT TARGET Foo::Foo)
+      add_library(Foo::Foo UNKNOWN IMPORTED)
+    endif()
+    if (Foo_LIBRARY_RELEASE)
+      set_property(TARGET Foo::Foo APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS RELEASE
+      )
+      set_target_properties(Foo::Foo PROPERTIES
+        IMPORTED_LOCATION_RELEASE "${Foo_LIBRARY_RELEASE}"
+      )
+    endif()
+    if (Foo_LIBRARY_DEBUG)
+      set_property(TARGET Foo::Foo APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS DEBUG
+      )
+      set_target_properties(Foo::Foo PROPERTIES
+        IMPORTED_LOCATION_DEBUG "${Foo_LIBRARY_DEBUG}"
+      )
+    endif()
+    set_target_properties(Foo::Foo PROPERTIES
+      INTERFACE_COMPILE_OPTIONS "${PC_Foo_CFLAGS_OTHER}"
+      INTERFACE_INCLUDE_DIRECTORIES "${Foo_INCLUDE_DIR}"
+    )
+  endif()
+
+The ``RELEASE`` variant should be listed first in the property
+so that that variant is chosen if the user uses a configuration which is
+not an exact match for any listed ``IMPORTED_CONFIGURATIONS``.
+
+Most of the cache variables should be hidden in the ``ccmake`` interface unless
+the user explicitly asks to edit them.
+
+.. code-block:: cmake
+
+  mark_as_advanced(
+    Foo_INCLUDE_DIR
+    Foo_LIBRARY
+  )
+
+If this module replaces an older version, you should set compatibility variables
+to cause the least disruption possible.
+
+.. code-block:: cmake
+
+  # compatibility variables
+  set(Foo_VERSION_STRING ${Foo_VERSION})
diff --git a/share/cmake-3.6/Help/manual/cmake-generator-expressions.7.rst b/share/cmake-3.6/Help/manual/cmake-generator-expressions.7.rst
new file mode 100644
index 0000000..d4f47dd
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-generator-expressions.7.rst
@@ -0,0 +1,284 @@
+.. cmake-manual-description: CMake Generator Expressions
+
+cmake-generator-expressions(7)
+******************************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+Generator expressions are evaluated during build system generation to produce
+information specific to each build configuration.
+
+Generator expressions are allowed in the context of many target properties,
+such as :prop_tgt:`LINK_LIBRARIES`, :prop_tgt:`INCLUDE_DIRECTORIES`,
+:prop_tgt:`COMPILE_DEFINITIONS` and others.  They may also be used when using
+commands to populate those properties, such as :command:`target_link_libraries`,
+:command:`target_include_directories`, :command:`target_compile_definitions`
+and others.
+
+This means that they enable conditional linking, conditional
+definitions used when compiling, and conditional include directories and
+more.  The conditions may be based on the build configuration, target
+properties, platform information or any other queryable information.
+
+Logical Expressions
+===================
+
+Logical expressions are used to create conditional output.  The basic
+expressions are the ``0`` and ``1`` expressions.  Because other logical
+expressions evaluate to either ``0`` or ``1``, they can be composed to
+create conditional output::
+
+  $<$<CONFIG:Debug>:DEBUG_MODE>
+
+expands to ``DEBUG_MODE`` when the ``Debug`` configuration is used, and
+otherwise expands to nothing.
+
+Available logical expressions are:
+
+``$<BOOL:...>``
+  ``1`` if the ``...`` is true, else ``0``
+``$<AND:?[,?]...>``
+  ``1`` if all ``?`` are ``1``, else ``0``
+
+  The ``?`` must always be either ``0`` or ``1`` in boolean expressions.
+
+``$<OR:?[,?]...>``
+  ``0`` if all ``?`` are ``0``, else ``1``
+``$<NOT:?>``
+  ``0`` if ``?`` is ``1``, else ``1``
+``$<STREQUAL:a,b>``
+  ``1`` if ``a`` is STREQUAL ``b``, else ``0``
+``$<EQUAL:a,b>``
+  ``1`` if ``a`` is EQUAL ``b`` in a numeric comparison, else ``0``
+``$<CONFIG:cfg>``
+  ``1`` if config is ``cfg``, else ``0``. This is a case-insensitive comparison.
+  The mapping in :prop_tgt:`MAP_IMPORTED_CONFIG_<CONFIG>` is also considered by
+  this expression when it is evaluated on a property on an :prop_tgt:`IMPORTED`
+  target.
+``$<PLATFORM_ID:comp>``
+  ``1`` if the CMake-id of the platform matches ``comp``, otherwise ``0``.
+``$<C_COMPILER_ID:comp>``
+  ``1`` if the CMake-id of the C compiler matches ``comp``, otherwise ``0``.
+``$<CXX_COMPILER_ID:comp>``
+  ``1`` if the CMake-id of the CXX compiler matches ``comp``, otherwise ``0``.
+``$<VERSION_GREATER:v1,v2>``
+  ``1`` if ``v1`` is a version greater than ``v2``, else ``0``.
+``$<VERSION_LESS:v1,v2>``
+  ``1`` if ``v1`` is a version less than ``v2``, else ``0``.
+``$<VERSION_EQUAL:v1,v2>``
+  ``1`` if ``v1`` is the same version as ``v2``, else ``0``.
+``$<C_COMPILER_VERSION:ver>``
+  ``1`` if the version of the C compiler matches ``ver``, otherwise ``0``.
+``$<CXX_COMPILER_VERSION:ver>``
+  ``1`` if the version of the CXX compiler matches ``ver``, otherwise ``0``.
+``$<TARGET_POLICY:pol>``
+  ``1`` if the policy ``pol`` was NEW when the 'head' target was created,
+  else ``0``.  If the policy was not set, the warning message for the policy
+  will be emitted. This generator expression only works for a subset of
+  policies.
+``$<COMPILE_FEATURES:feature[,feature]...>``
+  ``1`` if all of the ``feature`` features are available for the 'head'
+  target, and ``0`` otherwise. If this expression is used while evaluating
+  the link implementation of a target and if any dependency transitively
+  increases the required :prop_tgt:`C_STANDARD` or :prop_tgt:`CXX_STANDARD`
+  for the 'head' target, an error is reported.  See the
+  :manual:`cmake-compile-features(7)` manual for information on
+  compile features and a list of supported compilers.
+``$<COMPILE_LANGUAGE:lang>``
+  ``1`` when the language used for compilation unit matches ``lang``,
+  otherwise ``0``.  This expression used to specify compile options for
+  source files of a particular language in a target. For example, to specify
+  the use of the ``-fno-exceptions`` compile option (compiler id checks
+  elided):
+
+  .. code-block:: cmake
+
+    add_executable(myapp main.cpp foo.c bar.cpp)
+    target_compile_options(myapp
+      PRIVATE $<$<COMPILE_LANGUAGE:CXX>:-fno-exceptions>
+    )
+
+  This generator expression has limited use because it is not possible to
+  use it with the Visual Studio generators.  Portable buildsystems would
+  not use this expression, and would create separate libraries for each
+  source file language instead:
+
+  .. code-block:: cmake
+
+    add_library(myapp_c foo.c)
+    add_library(myapp_cxx foo.c)
+    target_compile_options(myapp_cxx PUBLIC -fno-exceptions)
+    add_executable(myapp main.cpp)
+    target_link_libraries(myapp myapp_c myapp_cxx)
+
+  The ``Makefile`` and ``Ninja`` based generators can also use this
+  expression to specify compile-language specific compile definitions
+  and include directories:
+
+  .. code-block:: cmake
+
+    add_executable(myapp main.cpp foo.c bar.cpp)
+    target_compile_definitions(myapp
+      PRIVATE $<$<COMPILE_LANGUAGE:CXX>:COMPILING_CXX>
+    )
+    target_include_directories(myapp
+      PRIVATE $<$<COMPILE_LANGUAGE:CXX>:/opt/foo/cxx_headers>
+    )
+
+Informational Expressions
+=========================
+
+These expressions expand to some information. The information may be used
+directly, eg::
+
+  include_directories(/usr/include/$<CXX_COMPILER_ID>/)
+
+expands to ``/usr/include/GNU/`` or ``/usr/include/Clang/`` etc, depending on
+the Id of the compiler.
+
+These expressions may also may be combined with logical expressions::
+
+  $<$<VERSION_LESS:$<CXX_COMPILER_VERSION>,4.2.0>:OLD_COMPILER>
+
+expands to ``OLD_COMPILER`` if the
+:variable:`CMAKE_CXX_COMPILER_VERSION <CMAKE_<LANG>_COMPILER_VERSION>` is less
+than 4.2.0.
+
+Available informational expressions are:
+
+``$<CONFIGURATION>``
+  Configuration name. Deprecated. Use ``CONFIG`` instead.
+``$<CONFIG>``
+  Configuration name
+``$<PLATFORM_ID>``
+  The CMake-id of the platform.
+  See also the :variable:`CMAKE_SYSTEM_NAME` variable.
+``$<C_COMPILER_ID>``
+  The CMake-id of the C compiler used.
+  See also the :variable:`CMAKE_<LANG>_COMPILER_ID` variable.
+``$<CXX_COMPILER_ID>``
+  The CMake-id of the CXX compiler used.
+  See also the :variable:`CMAKE_<LANG>_COMPILER_ID` variable.
+``$<C_COMPILER_VERSION>``
+  The version of the C compiler used.
+  See also the :variable:`CMAKE_<LANG>_COMPILER_VERSION` variable.
+``$<CXX_COMPILER_VERSION>``
+  The version of the CXX compiler used.
+  See also the :variable:`CMAKE_<LANG>_COMPILER_VERSION` variable.
+``$<TARGET_FILE:tgt>``
+  Full path to main file (.exe, .so.1.2, .a) where ``tgt`` is the name of a target.
+``$<TARGET_FILE_NAME:tgt>``
+  Name of main file (.exe, .so.1.2, .a).
+``$<TARGET_FILE_DIR:tgt>``
+  Directory of main file (.exe, .so.1.2, .a).
+``$<TARGET_LINKER_FILE:tgt>``
+  File used to link (.a, .lib, .so) where ``tgt`` is the name of a target.
+``$<TARGET_LINKER_FILE_NAME:tgt>``
+  Name of file used to link (.a, .lib, .so).
+``$<TARGET_LINKER_FILE_DIR:tgt>``
+  Directory of file used to link (.a, .lib, .so).
+``$<TARGET_SONAME_FILE:tgt>``
+  File with soname (.so.3) where ``tgt`` is the name of a target.
+``$<TARGET_SONAME_FILE_NAME:tgt>``
+  Name of file with soname (.so.3).
+``$<TARGET_SONAME_FILE_DIR:tgt>``
+  Directory of with soname (.so.3).
+``$<TARGET_PDB_FILE:tgt>``
+  Full path to the linker generated program database file (.pdb)
+  where ``tgt`` is the name of a target.
+
+  See also the :prop_tgt:`PDB_NAME` and :prop_tgt:`PDB_OUTPUT_DIRECTORY`
+  target properties and their configuration specific variants
+  :prop_tgt:`PDB_NAME_<CONFIG>` and :prop_tgt:`PDB_OUTPUT_DIRECTORY_<CONFIG>`.
+``$<TARGET_PDB_FILE_NAME:tgt>``
+  Name of the linker generated program database file (.pdb).
+``$<TARGET_PDB_FILE_DIR:tgt>``
+  Directory of the linker generated program database file (.pdb).
+``$<TARGET_PROPERTY:tgt,prop>``
+  Value of the property ``prop`` on the target ``tgt``.
+
+  Note that ``tgt`` is not added as a dependency of the target this
+  expression is evaluated on.
+``$<TARGET_PROPERTY:prop>``
+  Value of the property ``prop`` on the target on which the generator
+  expression is evaluated.
+``$<INSTALL_PREFIX>``
+  Content of the install prefix when the target is exported via
+  :command:`install(EXPORT)` and empty otherwise.
+``$<COMPILE_LANGUAGE>``
+  The compile language of source files when evaluating compile options. See
+  the unary version for notes about portability of this generator
+  expression.
+
+Output Expressions
+==================
+
+These expressions generate output, in some cases depending on an input. These
+expressions may be combined with other expressions for information or logical
+comparison::
+
+  -I$<JOIN:$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>, -I>
+
+generates a string of the entries in the :prop_tgt:`INCLUDE_DIRECTORIES` target
+property with each entry preceded by ``-I``. Note that a more-complete use
+in this situation would require first checking if the INCLUDE_DIRECTORIES
+property is non-empty::
+
+  $<$<BOOL:${prop}>:-I$<JOIN:${prop}, -I>>
+
+where ``${prop}`` refers to a helper variable::
+
+  set(prop "$<TARGET_PROPERTY:INCLUDE_DIRECTORIES>")
+
+Available output expressions are:
+
+``$<0:...>``
+  Empty string (ignores ``...``)
+``$<1:...>``
+  Content of ``...``
+``$<JOIN:list,...>``
+  Joins the list with the content of ``...``
+``$<ANGLE-R>``
+  A literal ``>``. Used to compare strings which contain a ``>`` for example.
+``$<COMMA>``
+  A literal ``,``. Used to compare strings which contain a ``,`` for example.
+``$<SEMICOLON>``
+  A literal ``;``. Used to prevent list expansion on an argument with ``;``.
+``$<TARGET_NAME:...>``
+  Marks ``...`` as being the name of a target.  This is required if exporting
+  targets to multiple dependent export sets.  The ``...`` must be a literal
+  name of a target- it may not contain generator expressions.
+``$<LINK_ONLY:...>``
+  Content of ``...`` except when evaluated in a link interface while
+  propagating :ref:`Target Usage Requirements`, in which case it is the
+  empty string.
+  Intended for use only in an :prop_tgt:`INTERFACE_LINK_LIBRARIES` target
+  property, perhaps via the :command:`target_link_libraries` command,
+  to specify private link dependencies without other usage requirements.
+``$<INSTALL_INTERFACE:...>``
+  Content of ``...`` when the property is exported using :command:`install(EXPORT)`,
+  and empty otherwise.
+``$<BUILD_INTERFACE:...>``
+  Content of ``...`` when the property is exported using :command:`export`, or
+  when the target is used by another target in the same buildsystem. Expands to
+  the empty string otherwise.
+``$<LOWER_CASE:...>``
+  Content of ``...`` converted to lower case.
+``$<UPPER_CASE:...>``
+  Content of ``...`` converted to upper case.
+``$<MAKE_C_IDENTIFIER:...>``
+  Content of ``...`` converted to a C identifier.
+``$<TARGET_OBJECTS:objLib>``
+  List of objects resulting from build of ``objLib``. ``objLib`` must be an
+  object of type ``OBJECT_LIBRARY``.  This expression may only be used in
+  the sources of :command:`add_library` and :command:`add_executable`
+  commands.
+``$<SHELL_PATH:...>``
+  Content of ``...`` converted to shell path style. For example, slashes are
+  converted to backslashes in Windows shells and drive letters are converted
+  to posix paths in MSYS shells. The ``...`` must be an absolute path.
diff --git a/share/cmake-3.6/Help/manual/cmake-generators.7.rst b/share/cmake-3.6/Help/manual/cmake-generators.7.rst
new file mode 100644
index 0000000..cde8de8
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-generators.7.rst
@@ -0,0 +1,112 @@
+.. cmake-manual-description: CMake Generators Reference
+
+cmake-generators(7)
+*******************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+A *CMake Generator* is responsible for writing the input files for
+a native build system.  Exactly one of the `CMake Generators`_ must be
+selected for a build tree to determine what native build system is to
+be used.  Optionally one of the `Extra Generators`_ may be selected
+as a variant of some of the `Command-Line Build Tool Generators`_ to
+produce project files for an auxiliary IDE.
+
+CMake Generators are platform-specific so each may be available only
+on certain platforms.  The :manual:`cmake(1)` command-line tool ``--help``
+output lists available generators on the current platform.  Use its ``-G``
+option to specify the generator for a new build tree.
+The :manual:`cmake-gui(1)` offers interactive selection of a generator
+when creating a new build tree.
+
+CMake Generators
+================
+
+Command-Line Build Tool Generators
+----------------------------------
+
+These generators support command-line build tools.  In order to use them,
+one must launch CMake from a command-line prompt whose environment is
+already configured for the chosen compiler and build tool.
+
+.. _`Makefile Generators`:
+
+Makefile Generators
+^^^^^^^^^^^^^^^^^^^
+
+.. toctree::
+   :maxdepth: 1
+
+   /generator/Borland Makefiles
+   /generator/MSYS Makefiles
+   /generator/MinGW Makefiles
+   /generator/NMake Makefiles
+   /generator/NMake Makefiles JOM
+   /generator/Unix Makefiles
+   /generator/Watcom WMake
+
+Ninja Generator
+^^^^^^^^^^^^^^^
+
+.. toctree::
+   :maxdepth: 1
+
+   /generator/Ninja
+
+IDE Build Tool Generators
+-------------------------
+
+These generators support Integrated Development Environment (IDE)
+project files.  Since the IDEs configure their own environment
+one may launch CMake from any environment.
+
+.. _`Visual Studio Generators`:
+
+Visual Studio Generators
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. toctree::
+   :maxdepth: 1
+
+   /generator/Visual Studio 6
+   /generator/Visual Studio 7
+   /generator/Visual Studio 7 .NET 2003
+   /generator/Visual Studio 8 2005
+   /generator/Visual Studio 9 2008
+   /generator/Visual Studio 10 2010
+   /generator/Visual Studio 11 2012
+   /generator/Visual Studio 12 2013
+   /generator/Visual Studio 14 2015
+
+Other Generators
+^^^^^^^^^^^^^^^^
+
+.. toctree::
+   :maxdepth: 1
+
+   /generator/Green Hills MULTI
+   /generator/Xcode
+
+Extra Generators
+================
+
+Some of the `CMake Generators`_ listed in the :manual:`cmake(1)`
+command-line tool ``--help`` output may have variants that specify
+an extra generator for an auxiliary IDE tool.  Such generator
+names have the form ``<extra-generator> - <main-generator>``.
+The following extra generators are known to CMake.
+
+.. toctree::
+   :maxdepth: 1
+
+   /generator/CodeBlocks
+   /generator/CodeLite
+   /generator/Eclipse CDT4
+   /generator/KDevelop3
+   /generator/Kate
+   /generator/Sublime Text 2
diff --git a/share/cmake-3.2/Help/manual/cmake-gui.1.rst b/share/cmake-3.6/Help/manual/cmake-gui.1.rst
similarity index 100%
rename from share/cmake-3.2/Help/manual/cmake-gui.1.rst
rename to share/cmake-3.6/Help/manual/cmake-gui.1.rst
diff --git a/share/cmake-3.6/Help/manual/cmake-language.7.rst b/share/cmake-3.6/Help/manual/cmake-language.7.rst
new file mode 100644
index 0000000..41542c9
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-language.7.rst
@@ -0,0 +1,572 @@
+.. cmake-manual-description: CMake Language Reference
+
+cmake-language(7)
+*****************
+
+.. only:: html
+
+   .. contents::
+
+Organization
+============
+
+CMake input files are written in the "CMake Language" in source files
+named ``CMakeLists.txt`` or ending in a ``.cmake`` file name extension.
+
+CMake Language source files in a project are organized into:
+
+* `Directories`_ (``CMakeLists.txt``),
+* `Scripts`_ (``<script>.cmake``), and
+* `Modules`_ (``<module>.cmake``).
+
+Directories
+-----------
+
+When CMake processes a project source tree, the entry point is
+a source file called ``CMakeLists.txt`` in the top-level source
+directory.  This file may contain the entire build specification
+or use the :command:`add_subdirectory` command to add subdirectories
+to the build.  Each subdirectory added by the command must also
+contain a ``CMakeLists.txt`` file as the entry point to that
+directory.  For each source directory whose ``CMakeLists.txt`` file
+is processed CMake generates a corresponding directory in the build
+tree to act as the default working and output directory.
+
+Scripts
+-------
+
+An individual ``<script>.cmake`` source file may be processed
+in *script mode* by using the :manual:`cmake(1)` command-line tool
+with the ``-P`` option.  Script mode simply runs the commands in
+the given CMake Language source file and does not generate a
+build system.  It does not allow CMake commands that define build
+targets or actions.
+
+Modules
+-------
+
+CMake Language code in either `Directories`_ or `Scripts`_ may
+use the :command:`include` command to load a ``<module>.cmake``
+source file in the scope of the including context.
+See the :manual:`cmake-modules(7)` manual page for documentation
+of modules included with the CMake distribution.
+Project source trees may also provide their own modules and
+specify their location(s) in the :variable:`CMAKE_MODULE_PATH`
+variable.
+
+Syntax
+======
+
+.. _`CMake Language Encoding`:
+
+Encoding
+--------
+
+A CMake Language source file may be written in 7-bit ASCII text for
+maximum portability across all supported platforms.  Newlines may be
+encoded as either ``\n`` or ``\r\n`` but will be converted to ``\n``
+as input files are read.
+
+Note that the implementation is 8-bit clean so source files may
+be encoded as UTF-8 on platforms with system APIs supporting this
+encoding.  In addition, CMake 3.2 and above support source files
+encoded in UTF-8 on Windows (using UTF-16 to call system APIs).
+Furthermore, CMake 3.0 and above allow a leading UTF-8
+`Byte-Order Mark`_ in source files.
+
+.. _`Byte-Order Mark`: http://en.wikipedia.org/wiki/Byte_order_mark
+
+Source Files
+------------
+
+A CMake Language source file consists of zero or more
+`Command Invocations`_ separated by newlines and optionally
+spaces and `Comments`_:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ file: `file_element`*
+ file_element: `command_invocation` `line_ending` |
+             : (`bracket_comment`|`space`)* `line_ending`
+ line_ending: `line_comment`? `newline`
+ space: <match '[ \t]+'>
+ newline: <match '\n'>
+
+.. raw:: latex
+
+   \end{small}
+
+Note that any source file line not inside `Command Arguments`_ or
+a `Bracket Comment`_ can end in a `Line Comment`_.
+
+.. _`Command Invocations`:
+
+Command Invocations
+-------------------
+
+A *command invocation* is a name followed by paren-enclosed arguments
+separated by whitespace:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ command_invocation: `space`* `identifier` `space`* '(' `arguments` ')'
+ identifier: <match '[A-Za-z_][A-Za-z0-9_]*'>
+ arguments: `argument`? `separated_arguments`*
+ separated_arguments: `separation`+ `argument`? |
+                    : `separation`* '(' `arguments` ')'
+ separation: `space` | `line_ending`
+
+.. raw:: latex
+
+   \end{small}
+
+For example:
+
+.. code-block:: cmake
+
+ add_executable(hello world.c)
+
+Command names are case-insensitive.
+Nested unquoted parentheses in the arguments must balance.
+Each ``(`` or ``)`` is given to the command invocation as
+a literal `Unquoted Argument`_.  This may be used in calls
+to the :command:`if` command to enclose conditions.
+For example:
+
+.. code-block:: cmake
+
+ if(FALSE AND (FALSE OR TRUE)) # evaluates to FALSE
+
+.. note::
+ CMake versions prior to 3.0 require command name identifiers
+ to be at least 2 characters.
+
+ CMake versions prior to 2.8.12 silently accept an `Unquoted Argument`_
+ or a `Quoted Argument`_ immediately following a `Quoted Argument`_ and
+ not separated by any whitespace.  For compatibility, CMake 2.8.12 and
+ higher accept such code but produce a warning.
+
+Command Arguments
+-----------------
+
+There are three types of arguments within `Command Invocations`_:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ argument: `bracket_argument` | `quoted_argument` | `unquoted_argument`
+
+.. raw:: latex
+
+   \end{small}
+
+.. _`Bracket Argument`:
+
+Bracket Argument
+^^^^^^^^^^^^^^^^
+
+A *bracket argument*, inspired by `Lua`_ long bracket syntax,
+encloses content between opening and closing "brackets" of the
+same length:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ bracket_argument: `bracket_open` `bracket_content` `bracket_close`
+ bracket_open: '[' '='{len} '['
+ bracket_content: <any text not containing a `bracket_close`
+                :  of the same {len} as the `bracket_open`>
+ bracket_close: ']' '='{len} ']'
+
+.. raw:: latex
+
+   \end{small}
+
+An opening bracket of length *len >= 0* is written ``[`` followed
+by *len* ``=`` followed by ``[`` and the corresponding closing
+bracket is written ``]`` followed by *len* ``=`` followed by ``]``.
+Brackets do not nest.  A unique length may always be chosen
+for the opening and closing brackets to contain closing brackets
+of other lengths.
+
+Bracket argument content consists of all text between the opening
+and closing brackets, except that one newline immediately following
+the opening bracket, if any, is ignored.  No evaluation of the
+enclosed content, such as `Escape Sequences`_ or `Variable References`_,
+is performed.  A bracket argument is always given to the command
+invocation as exactly one argument.
+
+For example:
+
+.. code-block:: cmake
+
+ message([=[
+ This is the first line in a bracket argument with bracket length 1.
+ No \-escape sequences or ${variable} references are evaluated.
+ This is always one argument even though it contains a ; character.
+ The text does not end on a closing bracket of length 0 like ]].
+ It does end in a closing bracket of length 1.
+ ]=])
+
+.. note::
+ CMake versions prior to 3.0 do not support bracket arguments.
+ They interpret the opening bracket as the start of an
+ `Unquoted Argument`_.
+
+.. _`Lua`: http://www.lua.org/
+
+.. _`Quoted Argument`:
+
+Quoted Argument
+^^^^^^^^^^^^^^^
+
+A *quoted argument* encloses content between opening and closing
+double-quote characters:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ quoted_argument: '"' `quoted_element`* '"'
+ quoted_element: <any character except '\' or '"'> |
+                 : `escape_sequence` |
+                 : `quoted_continuation`
+ quoted_continuation: '\' `newline`
+
+.. raw:: latex
+
+   \end{small}
+
+Quoted argument content consists of all text between opening and
+closing quotes.  Both `Escape Sequences`_ and `Variable References`_
+are evaluated.  A quoted argument is always given to the command
+invocation as exactly one argument.
+
+For example:
+
+.. code-block:: cmake
+
+ message("This is a quoted argument containing multiple lines.
+ This is always one argument even though it contains a ; character.
+ Both \\-escape sequences and ${variable} references are evaluated.
+ The text does not end on an escaped double-quote like \".
+ It does end in an unescaped double quote.
+ ")
+
+The final ``\`` on any line ending in an odd number of backslashes
+is treated as a line continuation and ignored along with the
+immediately following newline character.  For example:
+
+.. code-block:: cmake
+
+ message("\
+ This is the first line of a quoted argument. \
+ In fact it is the only line but since it is long \
+ the source code uses line continuation.\
+ ")
+
+.. note::
+ CMake versions prior to 3.0 do not support continuation with ``\``.
+ They report errors in quoted arguments containing lines ending in
+ an odd number of ``\`` characters.
+
+.. _`Unquoted Argument`:
+
+Unquoted Argument
+^^^^^^^^^^^^^^^^^
+
+An *unquoted argument* is not enclosed by any quoting syntax.
+It may not contain any whitespace, ``(``, ``)``, ``#``, ``"``, or ``\``
+except when escaped by a backslash:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ unquoted_argument: `unquoted_element`+ | `unquoted_legacy`
+ unquoted_element: <any character except whitespace or one of '()#"\'> |
+                 : `escape_sequence`
+ unquoted_legacy: <see note in text>
+
+.. raw:: latex
+
+   \end{small}
+
+Unquoted argument content consists of all text in a contiguous block
+of allowed or escaped characters.  Both `Escape Sequences`_ and
+`Variable References`_ are evaluated.  The resulting value is divided
+in the same way `Lists`_ divide into elements.  Each non-empty element
+is given to the command invocation as an argument.  Therefore an
+unquoted argument may be given to a command invocation as zero or
+more arguments.
+
+For example:
+
+.. code-block:: cmake
+
+ foreach(arg
+     NoSpace
+     Escaped\ Space
+     This;Divides;Into;Five;Arguments
+     Escaped\;Semicolon
+     )
+   message("${arg}")
+ endforeach()
+
+.. note::
+ To support legacy CMake code, unquoted arguments may also contain
+ double-quoted strings (``"..."``, possibly enclosing horizontal
+ whitespace), and make-style variable references (``$(MAKEVAR)``).
+ Unescaped double-quotes must balance, may not appear at the
+ beginning of an unquoted argument, and are treated as part of the
+ content.  For example, the unquoted arguments ``-Da="b c"``,
+ ``-Da=$(v)``, and ``a" "b"c"d`` are each interpreted literally.
+
+ The above "unquoted_legacy" production represents such arguments.
+ We do not recommend using legacy unquoted arguments in new code.
+ Instead use a `Quoted Argument`_ or a `Bracket Argument`_ to
+ represent the content.
+
+.. _`Escape Sequences`:
+
+Escape Sequences
+----------------
+
+An *escape sequence* is a ``\`` followed by one character:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ escape_sequence: `escape_identity` | `escape_encoded` | `escape_semicolon`
+ escape_identity: '\' <match '[^A-Za-z0-9;]'>
+ escape_encoded: '\t' | '\r' | '\n'
+ escape_semicolon: '\;'
+
+.. raw:: latex
+
+   \end{small}
+
+A ``\`` followed by a non-alphanumeric character simply encodes the literal
+character without interpreting it as syntax.  A ``\t``, ``\r``, or ``\n``
+encodes a tab, carriage return, or newline character, respectively. A ``\;``
+outside of any `Variable References`_  encodes itself but may be used in an
+`Unquoted Argument`_ to encode the ``;`` without dividing the argument
+value on it.  A ``\;`` inside `Variable References`_ encodes the literal
+``;`` character.  (See also policy :policy:`CMP0053` documentation for
+historical considerations.)
+
+.. _`Variable References`:
+
+Variable References
+-------------------
+
+A *variable reference* has the form ``${variable_name}`` and is
+evaluated inside a `Quoted Argument`_ or an `Unquoted Argument`_.
+A variable reference is replaced by the value of the variable,
+or by the empty string if the variable is not set.
+Variable references can nest and are evaluated from the
+inside out, e.g. ``${outer_${inner_variable}_variable}``.
+
+Literal variable references may consist of alphanumeric characters,
+the characters ``/_.+-``, and `Escape Sequences`_.  Nested references
+may be used to evaluate variables of any name.  (See also policy
+:policy:`CMP0053` documentation for historical considerations.)
+
+The `Variables`_ section documents the scope of variable names
+and how their values are set.
+
+An *environment variable reference* has the form ``$ENV{VAR}`` and
+is evaluated in the same contexts as a normal variable reference.
+
+Comments
+--------
+
+A comment starts with a ``#`` character that is not inside a
+`Bracket Argument`_, `Quoted Argument`_, or escaped with ``\``
+as part of an `Unquoted Argument`_.  There are two types of
+comments: a `Bracket Comment`_ and a `Line Comment`_.
+
+.. _`Bracket Comment`:
+
+Bracket Comment
+^^^^^^^^^^^^^^^
+
+A ``#`` immediately followed by a `Bracket Argument`_ forms a
+*bracket comment* consisting of the entire bracket enclosure:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ bracket_comment: '#' `bracket_argument`
+
+.. raw:: latex
+
+   \end{small}
+
+For example:
+
+.. code-block:: cmake
+
+ #[[This is a bracket comment.
+ It runs until the close bracket.]]
+ message("First Argument\n" #[[Bracket Comment]] "Second Argument")
+
+.. note::
+ CMake versions prior to 3.0 do not support bracket comments.
+ They interpret the opening ``#`` as the start of a `Line Comment`_.
+
+.. _`Line Comment`:
+
+Line Comment
+^^^^^^^^^^^^
+
+A ``#`` not immediately followed by a `Bracket Argument`_ forms a
+*line comment* that runs until the end of the line:
+
+.. raw:: latex
+
+   \begin{small}
+
+.. productionlist::
+ line_comment: '#' <any text not starting in a `bracket_argument`
+             :      and not containing a `newline`>
+
+.. raw:: latex
+
+   \end{small}
+
+For example:
+
+.. code-block:: cmake
+
+ # This is a line comment.
+ message("First Argument\n" # This is a line comment :)
+         "Second Argument") # This is a line comment.
+
+Control Structures
+==================
+
+Conditional Blocks
+------------------
+
+The :command:`if`/:command:`elseif`/:command:`else`/:command:`endif`
+commands delimit code blocks to be executed conditionally.
+
+Loops
+-----
+
+The :command:`foreach`/:command:`endforeach` and
+:command:`while`/:command:`endwhile` commands delimit code
+blocks to be executed in a loop.  Inside such blocks the
+:command:`break` command may be used to terminate the loop
+early whereas the :command:`continue` command may be used
+to start with the next iteration immediately.
+
+Command Definitions
+-------------------
+
+The :command:`macro`/:command:`endmacro`, and
+:command:`function`/:command:`endfunction` commands delimit
+code blocks to be recorded for later invocation as commands.
+
+.. _`CMake Language Variables`:
+
+Variables
+=========
+
+Variables are the basic unit of storage in the CMake Language.
+Their values are always of string type, though some commands may
+interpret the strings as values of other types.
+The :command:`set` and :command:`unset` commands explicitly
+set or unset a variable, but other commands have semantics
+that modify variables as well.
+Variable names are case-sensitive and may consist of almost
+any text, but we recommend sticking to names consisting only
+of alphanumeric characters plus ``_`` and ``-``.
+
+Variables have dynamic scope.  Each variable "set" or "unset"
+creates a binding in the current scope:
+
+Function Scope
+ `Command Definitions`_ created by the :command:`function` command
+ create commands that, when invoked, process the recorded commands
+ in a new variable binding scope.  A variable "set" or "unset"
+ binds in this scope and is visible for the current function and
+ any nested calls, but not after the function returns.
+
+Directory Scope
+ Each of the `Directories`_ in a source tree has its own variable
+ bindings.  Before processing the ``CMakeLists.txt`` file for a
+ directory, CMake copies all variable bindings currently defined
+ in the parent directory, if any, to initialize the new directory
+ scope.  CMake `Scripts`_, when processed with ``cmake -P``, bind
+ variables in one "directory" scope.
+
+ A variable "set" or "unset" not inside a function call binds
+ to the current directory scope.
+
+Persistent Cache
+ CMake stores a separate set of "cache" variables, or "cache entries",
+ whose values persist across multiple runs within a project build
+ tree.  Cache entries have an isolated binding scope modified only
+ by explicit request, such as by the ``CACHE`` option of the
+ :command:`set` and :command:`unset` commands.
+
+When evaluating `Variable References`_, CMake first searches the
+function call stack, if any, for a binding and then falls back
+to the binding in the current directory scope, if any.  If a
+"set" binding is found, its value is used.  If an "unset" binding
+is found, or no binding is found, CMake then searches for a
+cache entry.  If a cache entry is found, its value is used.
+Otherwise, the variable reference evaluates to an empty string.
+
+The :manual:`cmake-variables(7)` manual documents many variables
+that are provided by CMake or have meaning to CMake when set
+by project code.
+
+.. _`CMake Language Lists`:
+
+Lists
+=====
+
+Although all values in CMake are stored as strings, a string
+may be treated as a list in certain contexts, such as during
+evaluation of an `Unquoted Argument`_.  In such contexts, a string
+is divided into list elements by splitting on ``;`` characters not
+following an unequal number of ``[`` and ``]`` characters and not
+immediately preceded by a ``\``.  The sequence ``\;`` does not
+divide a value but is replaced by ``;`` in the resulting element.
+
+A list of elements is represented as a string by concatenating
+the elements separated by ``;``.  For example, the :command:`set`
+command stores multiple values into the destination variable
+as a list:
+
+.. code-block:: cmake
+
+ set(srcs a.c b.c c.c) # sets "srcs" to "a.c;b.c;c.c"
+
+Lists are meant for simple use cases such as a list of source
+files and should not be used for complex data processing tasks.
+Most commands that construct lists do not escape ``;`` characters
+in list elements, thus flattening nested lists:
+
+.. code-block:: cmake
+
+ set(x a "b;c") # sets "x" to "a;b;c", not "a;b\;c"
diff --git a/share/cmake-3.6/Help/manual/cmake-modules.7.rst b/share/cmake-3.6/Help/manual/cmake-modules.7.rst
new file mode 100644
index 0000000..62910cf
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-modules.7.rst
@@ -0,0 +1,246 @@
+.. cmake-manual-description: CMake Modules Reference
+
+cmake-modules(7)
+****************
+
+.. only:: html
+
+   .. contents::
+
+All Modules
+===========
+
+.. toctree::
+   :maxdepth: 1
+
+   /module/AddFileDependencies
+   /module/BundleUtilities
+   /module/CheckCCompilerFlag
+   /module/CheckCSourceCompiles
+   /module/CheckCSourceRuns
+   /module/CheckCXXCompilerFlag
+   /module/CheckCXXSourceCompiles
+   /module/CheckCXXSourceRuns
+   /module/CheckCXXSymbolExists
+   /module/CheckFortranCompilerFlag
+   /module/CheckFortranFunctionExists
+   /module/CheckFortranSourceCompiles
+   /module/CheckFunctionExists
+   /module/CheckIncludeFileCXX
+   /module/CheckIncludeFile
+   /module/CheckIncludeFiles
+   /module/CheckLanguage
+   /module/CheckLibraryExists
+   /module/CheckPrototypeDefinition
+   /module/CheckStructHasMember
+   /module/CheckSymbolExists
+   /module/CheckTypeSize
+   /module/CheckVariableExists
+   /module/CMakeAddFortranSubdirectory
+   /module/CMakeBackwardCompatibilityCXX
+   /module/CMakeDependentOption
+   /module/CMakeDetermineVSServicePack
+   /module/CMakeExpandImportedTargets
+   /module/CMakeFindDependencyMacro
+   /module/CMakeFindFrameworks
+   /module/CMakeFindPackageMode
+   /module/CMakeForceCompiler
+   /module/CMakeGraphVizOptions
+   /module/CMakePackageConfigHelpers
+   /module/CMakeParseArguments
+   /module/CMakePrintHelpers
+   /module/CMakePrintSystemInformation
+   /module/CMakePushCheckState
+   /module/CMakeVerifyManifest
+   /module/CPackBundle
+   /module/CPackComponent
+   /module/CPackCygwin
+   /module/CPackDeb
+   /module/CPackDMG
+   /module/CPackIFW
+   /module/CPackNSIS
+   /module/CPackPackageMaker
+   /module/CPackRPM
+   /module/CPack
+   /module/CPackWIX
+   /module/CTest
+   /module/CTestCoverageCollectGCOV
+   /module/CTestScriptMode
+   /module/CTestUseLaunchers
+   /module/Dart
+   /module/DeployQt4
+   /module/Documentation
+   /module/ExternalData
+   /module/ExternalProject
+   /module/FeatureSummary
+   /module/FindALSA
+   /module/FindArmadillo
+   /module/FindASPELL
+   /module/FindAVIFile
+   /module/FindBISON
+   /module/FindBLAS
+   /module/FindBacktrace
+   /module/FindBoost
+   /module/FindBullet
+   /module/FindBZip2
+   /module/FindCABLE
+   /module/FindCoin3D
+   /module/FindCUDA
+   /module/FindCups
+   /module/FindCURL
+   /module/FindCurses
+   /module/FindCVS
+   /module/FindCxxTest
+   /module/FindCygwin
+   /module/FindDart
+   /module/FindDCMTK
+   /module/FindDevIL
+   /module/FindDoxygen
+   /module/FindEXPAT
+   /module/FindFLEX
+   /module/FindFLTK2
+   /module/FindFLTK
+   /module/FindFreetype
+   /module/FindGCCXML
+   /module/FindGDAL
+   /module/FindGettext
+   /module/FindGIF
+   /module/FindGit
+   /module/FindGLEW
+   /module/FindGLUT
+   /module/FindGnuplot
+   /module/FindGnuTLS
+   /module/FindGSL
+   /module/FindGTest
+   /module/FindGTK2
+   /module/FindGTK
+   /module/FindHDF5
+   /module/FindHg
+   /module/FindHSPELL
+   /module/FindHTMLHelp
+   /module/FindIce
+   /module/FindIcotool
+   /module/FindImageMagick
+   /module/FindIntl
+   /module/FindITK
+   /module/FindJasper
+   /module/FindJava
+   /module/FindJNI
+   /module/FindJPEG
+   /module/FindKDE3
+   /module/FindKDE4
+   /module/FindLAPACK
+   /module/FindLATEX
+   /module/FindLibArchive
+   /module/FindLibLZMA
+   /module/FindLibXml2
+   /module/FindLibXslt
+   /module/FindLTTngUST
+   /module/FindLua50
+   /module/FindLua51
+   /module/FindLua
+   /module/FindMatlab
+   /module/FindMFC
+   /module/FindMotif
+   /module/FindMPEG2
+   /module/FindMPEG
+   /module/FindMPI
+   /module/FindOpenAL
+   /module/FindOpenCL
+   /module/FindOpenGL
+   /module/FindOpenMP
+   /module/FindOpenSceneGraph
+   /module/FindOpenSSL
+   /module/FindOpenThreads
+   /module/FindosgAnimation
+   /module/FindosgDB
+   /module/Findosg_functions
+   /module/FindosgFX
+   /module/FindosgGA
+   /module/FindosgIntrospection
+   /module/FindosgManipulator
+   /module/FindosgParticle
+   /module/FindosgPresentation
+   /module/FindosgProducer
+   /module/FindosgQt
+   /module/Findosg
+   /module/FindosgShadow
+   /module/FindosgSim
+   /module/FindosgTerrain
+   /module/FindosgText
+   /module/FindosgUtil
+   /module/FindosgViewer
+   /module/FindosgVolume
+   /module/FindosgWidget
+   /module/FindPackageHandleStandardArgs
+   /module/FindPackageMessage
+   /module/FindPerlLibs
+   /module/FindPerl
+   /module/FindPHP4
+   /module/FindPhysFS
+   /module/FindPike
+   /module/FindPkgConfig
+   /module/FindPNG
+   /module/FindPostgreSQL
+   /module/FindProducer
+   /module/FindProtobuf
+   /module/FindPythonInterp
+   /module/FindPythonLibs
+   /module/FindQt3
+   /module/FindQt4
+   /module/FindQt
+   /module/FindQuickTime
+   /module/FindRTI
+   /module/FindRuby
+   /module/FindSDL_image
+   /module/FindSDL_mixer
+   /module/FindSDL_net
+   /module/FindSDL
+   /module/FindSDL_sound
+   /module/FindSDL_ttf
+   /module/FindSelfPackers
+   /module/FindSquish
+   /module/FindSubversion
+   /module/FindSWIG
+   /module/FindTCL
+   /module/FindTclsh
+   /module/FindTclStub
+   /module/FindThreads
+   /module/FindTIFF
+   /module/FindUnixCommands
+   /module/FindVTK
+   /module/FindWget
+   /module/FindWish
+   /module/FindwxWidgets
+   /module/FindwxWindows
+   /module/FindXCTest
+   /module/FindXalanC
+   /module/FindXercesC
+   /module/FindX11
+   /module/FindXMLRPC
+   /module/FindZLIB
+   /module/FortranCInterface
+   /module/GenerateExportHeader
+   /module/GetPrerequisites
+   /module/GNUInstallDirs
+   /module/InstallRequiredSystemLibraries
+   /module/MacroAddFileDependencies
+   /module/ProcessorCount
+   /module/SelectLibraryConfigurations
+   /module/SquishTestScript
+   /module/TestBigEndian
+   /module/TestCXXAcceptsFlag
+   /module/TestForANSIForScope
+   /module/TestForANSIStreamHeaders
+   /module/TestForSSTREAM
+   /module/TestForSTDNamespace
+   /module/UseEcos
+   /module/UseJavaClassFilelist
+   /module/UseJava
+   /module/UseJavaSymlinks
+   /module/UsePkgConfig
+   /module/UseSWIG
+   /module/UsewxWidgets
+   /module/Use_wxWindows
+   /module/WriteBasicConfigVersionFile
+   /module/WriteCompilerDetectionHeader
diff --git a/share/cmake-3.6/Help/manual/cmake-packages.7.rst b/share/cmake-3.6/Help/manual/cmake-packages.7.rst
new file mode 100644
index 0000000..c27c612
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-packages.7.rst
@@ -0,0 +1,709 @@
+.. cmake-manual-description: CMake Packages Reference
+
+cmake-packages(7)
+*****************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+Packages provide dependency information to CMake based buildsystems.  Packages
+are found with the :command:`find_package` command.  The result of
+using ``find_package`` is either a set of :prop_tgt:`IMPORTED` targets, or
+a set of variables corresponding to build-relevant information.
+
+Using Packages
+==============
+
+CMake provides direct support for two forms of packages,
+`Config-file Packages`_ and `Find-module Packages`_.
+Indirect support for ``pkg-config`` packages is also provided via
+the :module:`FindPkgConfig` module.  In all cases, the basic form
+of :command:`find_package` calls is the same:
+
+.. code-block:: cmake
+
+  find_package(Qt4 4.7.0 REQUIRED) # CMake provides a Qt4 find-module
+  find_package(Qt5Core 5.1.0 REQUIRED) # Qt provides a Qt5 package config file.
+  find_package(LibXml2 REQUIRED) # Use pkg-config via the LibXml2 find-module
+
+In cases where it is known that a package configuration file is provided by
+upstream, and only that should be used, the ``CONFIG`` keyword may be passed
+to :command:`find_package`:
+
+.. code-block:: cmake
+
+  find_package(Qt5Core 5.1.0 CONFIG REQUIRED)
+  find_package(Qt5Gui 5.1.0 CONFIG)
+
+Similarly, the ``MODULE`` keyword says to use only a find-module:
+
+.. code-block:: cmake
+
+  find_package(Qt4 4.7.0 MODULE REQUIRED)
+
+Specifying the type of package explicitly improves the error message shown to
+the user if it is not found.
+
+Both types of packages also support specifying components of a package,
+either after the ``REQUIRED`` keyword:
+
+.. code-block:: cmake
+
+  find_package(Qt5 5.1.0 CONFIG REQUIRED Widgets Xml Sql)
+
+or as a separate ``COMPONENTS`` list:
+
+.. code-block:: cmake
+
+  find_package(Qt5 5.1.0 COMPONENTS Widgets Xml Sql)
+
+or as a separate ``OPTIONAL_COMPONENTS`` list:
+
+.. code-block:: cmake
+
+  find_package(Qt5 5.1.0 COMPONENTS Widgets
+                         OPTIONAL_COMPONENTS Xml Sql
+  )
+
+Handling of ``COMPONENTS`` and ``OPTIONAL_COMPONENTS`` is defined by the
+package.
+
+By setting the :variable:`CMAKE_DISABLE_FIND_PACKAGE_<PackageName>` variable to
+``TRUE``, the ``PackageName`` package will not be searched, and will always
+be ``NOTFOUND``.
+
+.. _`Config File Packages`:
+
+Config-file Packages
+--------------------
+
+A config-file package is a set of files provided by upstreams for downstreams
+to use. CMake searches in a number of locations for package configuration files, as
+described in the :command:`find_package` documentation.  The most simple way for
+a CMake user to tell :manual:`cmake(1)` to search in a non-standard prefix for
+a package is to set the ``CMAKE_PREFIX_PATH`` cache variable.
+
+Config-file packages are provided by upstream vendors as part of development
+packages, that is, they belong with the header files and any other files
+provided to assist downstreams in using the package.
+
+A set of variables which provide package status information are also set
+automatically when using a config-file package.  The ``<Package>_FOUND``
+variable is set to true or false, depending on whether the package was
+found.  The ``<Package>_DIR`` cache variable is set to the location of the
+package configuration file.
+
+Find-module Packages
+--------------------
+
+A find module is a file with a set of rules for finding the required pieces of
+a dependency, primarily header files and libraries.  Typically, a find module
+is needed when the upstream is not built with CMake, or is not CMake-aware
+enough to otherwise provide a package configuration file.  Unlike a package configuration
+file, it is not shipped with upstream, but is used by downstream to find the
+files by guessing locations of files with platform-specific hints.
+
+Unlike the case of an upstream-provided package configuration file, no single point
+of reference identifies the package as being found, so the ``<Package>_FOUND``
+variable is not automatically set by the :command:`find_package` command.  It
+can still be expected to be set by convention however and should be set by
+the author of the Find-module.  Similarly there is no ``<Package>_DIR`` variable,
+but each of the artifacts such as library locations and header file locations
+provide a separate cache variable.
+
+See the :manual:`cmake-developer(7)` manual for more information about creating
+Find-module files.
+
+Package Layout
+==============
+
+A config-file package consists of a `Package Configuration File`_ and
+optionally a `Package Version File`_ provided with the project distribution.
+
+Package Configuration File
+--------------------------
+
+Consider a project ``Foo`` that installs the following files::
+
+  <prefix>/include/foo-1.2/foo.h
+  <prefix>/lib/foo-1.2/libfoo.a
+
+It may also provide a CMake package configuration file::
+
+  <prefix>/lib/cmake/foo-1.2/FooConfig.cmake
+
+with content defining :prop_tgt:`IMPORTED` targets, or defining variables, such
+as:
+
+.. code-block:: cmake
+
+  # ...
+  # (compute PREFIX relative to file location)
+  # ...
+  set(Foo_INCLUDE_DIRS ${PREFIX}/include/foo-1.2)
+  set(Foo_LIBRARIES ${PREFIX}/lib/foo-1.2/libfoo.a)
+
+If another project wishes to use ``Foo`` it need only to locate the ``FooConfig.cmake``
+file and load it to get all the information it needs about package content
+locations.  Since the package configuration file is provided by the package
+installation it already knows all the file locations.
+
+The :command:`find_package` command may be used to search for the package
+configuration file.  This command constructs a set of installation prefixes
+and searches under each prefix in several locations.  Given the name ``Foo``,
+it looks for a file called ``FooConfig.cmake`` or ``foo-config.cmake``.
+The full set of locations is specified in the :command:`find_package` command
+documentation. One place it looks is::
+
+ <prefix>/lib/cmake/Foo*/
+
+where ``Foo*`` is a case-insensitive globbing expression.  In our example the
+globbing expression will match ``<prefix>/lib/cmake/foo-1.2`` and the package
+configuration file will be found.
+
+Once found, a package configuration file is immediately loaded.  It, together
+with a package version file, contains all the information the project needs to
+use the package.
+
+Package Version File
+--------------------
+
+When the :command:`find_package` command finds a candidate package configuration
+file it looks next to it for a version file. The version file is loaded to test
+whether the package version is an acceptable match for the version requested.
+If the version file claims compatibility the configuration file is accepted.
+Otherwise it is ignored.
+
+The name of the package version file must match that of the package configuration
+file but has either ``-version`` or ``Version`` appended to the name before
+the ``.cmake`` extension.  For example, the files::
+
+ <prefix>/lib/cmake/foo-1.3/foo-config.cmake
+ <prefix>/lib/cmake/foo-1.3/foo-config-version.cmake
+
+and::
+
+ <prefix>/lib/cmake/bar-4.2/BarConfig.cmake
+ <prefix>/lib/cmake/bar-4.2/BarConfigVersion.cmake
+
+are each pairs of package configuration files and corresponding package version
+files.
+
+When the :command:`find_package` command loads a version file it first sets the
+following variables:
+
+``PACKAGE_FIND_NAME``
+ The <package> name
+
+``PACKAGE_FIND_VERSION``
+ Full requested version string
+
+``PACKAGE_FIND_VERSION_MAJOR``
+ Major version if requested, else 0
+
+``PACKAGE_FIND_VERSION_MINOR``
+ Minor version if requested, else 0
+
+``PACKAGE_FIND_VERSION_PATCH``
+ Patch version if requested, else 0
+
+``PACKAGE_FIND_VERSION_TWEAK``
+ Tweak version if requested, else 0
+
+``PACKAGE_FIND_VERSION_COUNT``
+ Number of version components, 0 to 4
+
+The version file must use these variables to check whether it is compatible or
+an exact match for the requested version and set the following variables with
+results:
+
+``PACKAGE_VERSION``
+ Full provided version string
+
+``PACKAGE_VERSION_EXACT``
+ True if version is exact match
+
+``PACKAGE_VERSION_COMPATIBLE``
+ True if version is compatible
+
+``PACKAGE_VERSION_UNSUITABLE``
+ True if unsuitable as any version
+
+Version files are loaded in a nested scope so they are free to set any variables
+they wish as part of their computation. The find_package command wipes out the
+scope when the version file has completed and it has checked the output
+variables. When the version file claims to be an acceptable match for the
+requested version the find_package command sets the following variables for
+use by the project:
+
+``<package>_VERSION``
+ Full provided version string
+
+``<package>_VERSION_MAJOR``
+ Major version if provided, else 0
+
+``<package>_VERSION_MINOR``
+ Minor version if provided, else 0
+
+``<package>_VERSION_PATCH``
+ Patch version if provided, else 0
+
+``<package>_VERSION_TWEAK``
+ Tweak version if provided, else 0
+
+``<package>_VERSION_COUNT``
+ Number of version components, 0 to 4
+
+The variables report the version of the package that was actually found.
+The ``<package>`` part of their name matches the argument given to the
+:command:`find_package` command.
+
+.. _`Creating Packages`:
+
+Creating Packages
+=================
+
+Usually, the upstream depends on CMake itself and can use some CMake facilities
+for creating the package files. Consider an upstream which provides a single
+shared library:
+
+.. code-block:: cmake
+
+  project(UpstreamLib)
+
+  set(CMAKE_INCLUDE_CURRENT_DIR ON)
+  set(CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE ON)
+
+  set(Upstream_VERSION 3.4.1)
+
+  include(GenerateExportHeader)
+
+  add_library(ClimbingStats SHARED climbingstats.cpp)
+  generate_export_header(ClimbingStats)
+  set_property(TARGET ClimbingStats PROPERTY VERSION ${Upstream_VERSION})
+  set_property(TARGET ClimbingStats PROPERTY SOVERSION 3)
+  set_property(TARGET ClimbingStats PROPERTY
+    INTERFACE_ClimbingStats_MAJOR_VERSION 3)
+  set_property(TARGET ClimbingStats APPEND PROPERTY
+    COMPATIBLE_INTERFACE_STRING ClimbingStats_MAJOR_VERSION
+  )
+
+  install(TARGETS ClimbingStats EXPORT ClimbingStatsTargets
+    LIBRARY DESTINATION lib
+    ARCHIVE DESTINATION lib
+    RUNTIME DESTINATION bin
+    INCLUDES DESTINATION include
+  )
+  install(
+    FILES
+      climbingstats.h
+      "${CMAKE_CURRENT_BINARY_DIR}/climbingstats_export.h"
+    DESTINATION
+      include
+    COMPONENT
+      Devel
+  )
+
+  include(CMakePackageConfigHelpers)
+  write_basic_package_version_file(
+    "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfigVersion.cmake"
+    VERSION ${Upstream_VERSION}
+    COMPATIBILITY AnyNewerVersion
+  )
+
+  export(EXPORT ClimbingStatsTargets
+    FILE "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsTargets.cmake"
+    NAMESPACE Upstream::
+  )
+  configure_file(cmake/ClimbingStatsConfig.cmake
+    "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfig.cmake"
+    COPYONLY
+  )
+
+  set(ConfigPackageLocation lib/cmake/ClimbingStats)
+  install(EXPORT ClimbingStatsTargets
+    FILE
+      ClimbingStatsTargets.cmake
+    NAMESPACE
+      Upstream::
+    DESTINATION
+      ${ConfigPackageLocation}
+  )
+  install(
+    FILES
+      cmake/ClimbingStatsConfig.cmake
+      "${CMAKE_CURRENT_BINARY_DIR}/ClimbingStats/ClimbingStatsConfigVersion.cmake"
+    DESTINATION
+      ${ConfigPackageLocation}
+    COMPONENT
+      Devel
+  )
+
+The :module:`CMakePackageConfigHelpers` module provides a macro for creating
+a simple ``ConfigVersion.cmake`` file.  This file sets the version of the
+package.  It is read by CMake when :command:`find_package` is called to
+determine the compatibility with the requested version, and to set some
+version-specific variables ``<Package>_VERSION``, ``<Package>_VERSION_MAJOR``,
+``<Package>_VERSION_MINOR`` etc.  The :command:`install(EXPORT)` command is
+used to export the targets in the ``ClimbingStatsTargets`` export-set, defined
+previously by the :command:`install(TARGETS)` command. This command generates
+the ``ClimbingStatsTargets.cmake`` file to contain :prop_tgt:`IMPORTED`
+targets, suitable for use by downstreams and arranges to install it to
+``lib/cmake/ClimbingStats``.  The generated ``ClimbingStatsConfigVersion.cmake``
+and a ``cmake/ClimbingStatsConfig.cmake`` are installed to the same location,
+completing the package.
+
+The generated :prop_tgt:`IMPORTED` targets have appropriate properties set
+to define their :ref:`usage requirements <Target Usage Requirements>`, such as
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES`,
+:prop_tgt:`INTERFACE_COMPILE_DEFINITIONS` and other relevant built-in
+``INTERFACE_`` properties.  The ``INTERFACE`` variant of user-defined
+properties listed in :prop_tgt:`COMPATIBLE_INTERFACE_STRING` and
+other :ref:`Compatible Interface Properties` are also propagated to the
+generated :prop_tgt:`IMPORTED` targets.  In the above case,
+``ClimbingStats_MAJOR_VERSION`` is defined as a string which must be
+compatible among the dependencies of any depender.  By setting this custom
+defined user property in this version and in the next version of
+``ClimbingStats``, :manual:`cmake(1)` will issue a diagnostic if there is an
+attempt to use version 3 together with version 4.  Packages can choose to
+employ such a pattern if different major versions of the package are designed
+to be incompatible.
+
+A ``NAMESPACE`` with double-colons is specified when exporting the targets
+for installation.  This convention of double-colons gives CMake a hint that
+the name is an :prop_tgt:`IMPORTED` target when it is used by downstreams
+with the :command:`target_link_libraries` command.  This way, CMake can
+issue a diagnostic if the package providing it has not yet been found.
+
+In this case, when using :command:`install(TARGETS)` the ``INCLUDES DESTINATION``
+was specified.  This causes the ``IMPORTED`` targets to have their
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` populated with the ``include``
+directory in the :variable:`CMAKE_INSTALL_PREFIX`.  When the ``IMPORTED``
+target is used by downstream, it automatically consumes the entries from
+that property.
+
+Creating a Package Configuration File
+-------------------------------------
+
+In this case, the ``ClimbingStatsConfig.cmake`` file could be as simple as:
+
+.. code-block:: cmake
+
+  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
+
+As this allows downstreams to use the ``IMPORTED`` targets.  If any macros
+should be provided by the ``ClimbingStats`` package, they should
+be in a separate file which is installed to the same location as the
+``ClimbingStatsConfig.cmake`` file, and included from there.
+
+This can also be extended to cover dependencies:
+
+.. code-block:: cmake
+
+  # ...
+  add_library(ClimbingStats SHARED climbingstats.cpp)
+  generate_export_header(ClimbingStats)
+
+  find_package(Stats 2.6.4 REQUIRED)
+  target_link_libraries(ClimbingStats PUBLIC Stats::Types)
+
+As the ``Stats::Types`` target is a ``PUBLIC`` dependency of ``ClimbingStats``,
+downstreams must also find the ``Stats`` package and link to the ``Stats::Types``
+library.  The ``Stats`` package should be found in the ``ClimbingStatsConfig.cmake``
+file to ensure this.  The ``find_dependency`` macro from the
+:module:`CMakeFindDependencyMacro` helps with this by propagating
+whether the package is ``REQUIRED``, or ``QUIET`` etc.  All ``REQUIRED``
+dependencies of a package should be found in the ``Config.cmake`` file:
+
+.. code-block:: cmake
+
+  include(CMakeFindDependencyMacro)
+  find_dependency(Stats 2.6.4)
+
+  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
+  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsMacros.cmake")
+
+The ``find_dependency`` macro also sets ``ClimbingStats_FOUND`` to ``False`` if
+the dependency is not found, along with a diagnostic that the ``ClimbingStats``
+package can not be used without the ``Stats`` package.
+
+If ``COMPONENTS`` are specified when the downstream uses :command:`find_package`,
+they are listed in the ``<Package>_FIND_COMPONENTS`` variable. If a particular
+component is non-optional, then the ``<Package>_FIND_REQUIRED_<comp>`` will
+be true. This can be tested with logic in the package configuration file:
+
+.. code-block:: cmake
+
+  include(CMakeFindDependencyMacro)
+  find_dependency(Stats 2.6.4)
+
+  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsTargets.cmake")
+  include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStatsMacros.cmake")
+
+  set(_supported_components Plot Table)
+
+  foreach(_comp ${ClimbingStats_FIND_COMPONENTS})
+    if (NOT ";${_supported_components};" MATCHES _comp)
+      set(ClimbingStats_FOUND False)
+      set(ClimbingStats_NOTFOUND_MESSAGE "Unsupported component: ${_comp}")
+    endif()
+    include("${CMAKE_CURRENT_LIST_DIR}/ClimbingStats${_comp}Targets.cmake")
+  endforeach()
+
+Here, the ``ClimbingStats_NOTFOUND_MESSAGE`` is set to a diagnosis that the package
+could not be found because an invalid component was specified.  This message
+variable can be set for any case where the ``_FOUND`` variable is set to ``False``,
+and will be displayed to the user.
+
+Creating a Package Configuration File for the Build Tree
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The :command:`export(EXPORT)` command creates an :prop_tgt:`IMPORTED` targets
+definition file which is specific to the build-tree, and is not relocatable.
+This can similarly be used with a suitable package configuration file and
+package version file to define a package for the build tree which may be used
+without installation.  Consumers of the build tree can simply ensure that the
+:variable:`CMAKE_PREFIX_PATH` contains the build directory, or set the
+``ClimbingStats_DIR`` to ``<build_dir>/ClimbingStats`` in the cache.
+
+.. _`Creating Relocatable Packages`:
+
+Creating Relocatable Packages
+-----------------------------
+
+A relocatable package must not reference absolute paths of files on
+the machine where the package is built that will not exist on the
+machines where the package may be installed.
+
+Packages created by :command:`install(EXPORT)` are designed to be relocatable,
+using paths relative to the location of the package itself.  When defining
+the interface of a target for ``EXPORT``, keep in mind that the include
+directories should be specified as relative paths which are relative to the
+:variable:`CMAKE_INSTALL_PREFIX`:
+
+.. code-block:: cmake
+
+  target_include_directories(tgt INTERFACE
+    # Wrong, not relocatable:
+    $<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include/TgtName>
+  )
+
+  target_include_directories(tgt INTERFACE
+    # Ok, relocatable:
+    $<INSTALL_INTERFACE:include/TgtName>
+  )
+
+The ``$<INSTALL_PREFIX>``
+:manual:`generator expression <cmake-generator-expressions(7)>` may be used as
+a placeholder for the install prefix without resulting in a non-relocatable
+package.  This is necessary if complex generator expressions are used:
+
+.. code-block:: cmake
+
+  target_include_directories(tgt INTERFACE
+    # Ok, relocatable:
+    $<INSTALL_INTERFACE:$<$<CONFIG:Debug>:$<INSTALL_PREFIX>/include/TgtName>>
+  )
+
+This also applies to paths referencing external dependencies.
+It is not advisable to populate any properties which may contain
+paths, such as :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` and
+:prop_tgt:`INTERFACE_LINK_LIBRARIES`, with paths relevant to dependencies.
+For example, this code may not work well for a relocatable package:
+
+.. code-block:: cmake
+
+  target_link_libraries(ClimbingStats INTERFACE
+    ${Foo_LIBRARIES} ${Bar_LIBRARIES}
+    )
+  target_include_directories(ClimbingStats INTERFACE
+    "$<INSTALL_INTERFACE:${Foo_INCLUDE_DIRS};${Bar_INCLUDE_DIRS}>"
+    )
+
+The referenced variables may contain the absolute paths to libraries
+and include directories **as found on the machine the package was made on**.
+This would create a package with hard-coded paths to dependencies and not
+suitable for relocation.
+
+Ideally such dependencies should be used through their own
+:ref:`IMPORTED targets <Imported Targets>` that have their own
+:prop_tgt:`IMPORTED_LOCATION` and usage requirement properties
+such as :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` populated
+appropriately.  Those imported targets may then be used with
+the :command:`target_link_libraries` command for ``ClimbingStats``:
+
+.. code-block:: cmake
+
+  target_link_libraries(ClimbingStats INTERFACE Foo::Foo Bar::Bar)
+
+With this approach the package references its external dependencies
+only through the names of :ref:`IMPORTED targets <Imported Targets>`.
+When a consumer uses the installed package, the consumer will run the
+appropriate :command:`find_package` commands (via the ``find_dependency``
+macro described above) to find the dependencies and populate the
+imported targets with appropriate paths on their own machine.
+
+Unfortunately many :manual:`modules <cmake-modules(7)>` shipped with
+CMake do not yet provide :ref:`IMPORTED targets <Imported Targets>`
+because their development pre-dated this approach.  This may improve
+incrementally over time.  Workarounds to create relocatable packages
+using such modules include:
+
+* When building the package, specify each ``Foo_LIBRARY`` cache
+  entry as just a library name, e.g. ``-DFoo_LIBRARY=foo``.  This
+  tells the corresponding find module to populate the ``Foo_LIBRARIES``
+  with just ``foo`` to ask the linker to search for the library
+  instead of hard-coding a path.
+
+* Or, after installing the package content but before creating the
+  package installation binary for redistribution, manually replace
+  the absolute paths with placeholders for substitution by the
+  installation tool when the package is installed.
+
+.. _`Package Registry`:
+
+Package Registry
+================
+
+CMake provides two central locations to register packages that have
+been built or installed anywhere on a system:
+
+* `User Package Registry`_
+* `System Package Registry`_
+
+The registries are especially useful to help projects find packages in
+non-standard install locations or directly in their own build trees.
+A project may populate either the user or system registry (using its own
+means, see below) to refer to its location.
+In either case the package should store at the registered location a
+`Package Configuration File`_ (``<package>Config.cmake``) and optionally a
+`Package Version File`_ (``<package>ConfigVersion.cmake``).
+
+The :command:`find_package` command searches the two package registries
+as two of the search steps specified in its documentation.  If it has
+sufficient permissions it also removes stale package registry entries
+that refer to directories that do not exist or do not contain a matching
+package configuration file.
+
+.. _`User Package Registry`:
+
+User Package Registry
+---------------------
+
+The User Package Registry is stored in a per-user location.
+The :command:`export(PACKAGE)` command may be used to register a project
+build tree in the user package registry.  CMake currently provides no
+interface to add install trees to the user package registry.  Installers
+must be manually taught to register their packages if desired.
+
+On Windows the user package registry is stored in the Windows registry
+under a key in ``HKEY_CURRENT_USER``.
+
+A ``<package>`` may appear under registry key::
+
+  HKEY_CURRENT_USER\Software\Kitware\CMake\Packages\<package>
+
+as a ``REG_SZ`` value, with arbitrary name, that specifies the directory
+containing the package configuration file.
+
+On UNIX platforms the user package registry is stored in the user home
+directory under ``~/.cmake/packages``.  A ``<package>`` may appear under
+the directory::
+
+  ~/.cmake/packages/<package>
+
+as a file, with arbitrary name, whose content specifies the directory
+containing the package configuration file.
+
+.. _`System Package Registry`:
+
+System Package Registry
+-----------------------
+
+The System Package Registry is stored in a system-wide location.
+CMake currently provides no interface to add to the system package registry.
+Installers must be manually taught to register their packages if desired.
+
+On Windows the system package registry is stored in the Windows registry
+under a key in ``HKEY_LOCAL_MACHINE``.  A ``<package>`` may appear under
+registry key::
+
+  HKEY_LOCAL_MACHINE\Software\Kitware\CMake\Packages\<package>
+
+as a ``REG_SZ`` value, with arbitrary name, that specifies the directory
+containing the package configuration file.
+
+There is no system package registry on non-Windows platforms.
+
+.. _`Disabling the Package Registry`:
+
+Disabling the Package Registry
+------------------------------
+
+In some cases using the Package Registries is not desirable. CMake
+allows one to disable them using the following variables:
+
+ * :variable:`CMAKE_EXPORT_NO_PACKAGE_REGISTRY` disables the
+   :command:`export(PACKAGE)` command.
+ * :variable:`CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY` disables the
+   User Package Registry in all the :command:`find_package` calls.
+ * :variable:`CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY` disables
+   the System Package Registry in all the :command:`find_package` calls.
+
+Package Registry Example
+------------------------
+
+A simple convention for naming package registry entries is to use content
+hashes.  They are deterministic and unlikely to collide
+(:command:`export(PACKAGE)` uses this approach).
+The name of an entry referencing a specific directory is simply the content
+hash of the directory path itself.
+
+If a project arranges for package registry entries to exist, such as::
+
+ > reg query HKCU\Software\Kitware\CMake\Packages\MyPackage
+ HKEY_CURRENT_USER\Software\Kitware\CMake\Packages\MyPackage
+  45e7d55f13b87179bb12f907c8de6fc4 REG_SZ c:/Users/Me/Work/lib/cmake/MyPackage
+  7b4a9844f681c80ce93190d4e3185db9 REG_SZ c:/Users/Me/Work/MyPackage-build
+
+or::
+
+ $ cat ~/.cmake/packages/MyPackage/7d1fb77e07ce59a81bed093bbee945bd
+ /home/me/work/lib/cmake/MyPackage
+ $ cat ~/.cmake/packages/MyPackage/f92c1db873a1937f3100706657c63e07
+ /home/me/work/MyPackage-build
+
+then the ``CMakeLists.txt`` code:
+
+.. code-block:: cmake
+
+  find_package(MyPackage)
+
+will search the registered locations for package configuration files
+(``MyPackageConfig.cmake``).  The search order among package registry
+entries for a single package is unspecified and the entry names
+(hashes in this example) have no meaning.  Registered locations may
+contain package version files (``MyPackageConfigVersion.cmake``) to
+tell :command:`find_package` whether a specific location is suitable
+for the version requested.
+
+Package Registry Ownership
+--------------------------
+
+Package registry entries are individually owned by the project installations
+that they reference.  A package installer is responsible for adding its own
+entry and the corresponding uninstaller is responsible for removing it.
+
+The :command:`export(PACKAGE)` command populates the user package registry
+with the location of a project build tree.  Build trees tend to be deleted by
+developers and have no "uninstall" event that could trigger removal of their
+entries.  In order to keep the registries clean the :command:`find_package`
+command automatically removes stale entries it encounters if it has sufficient
+permissions.  CMake provides no interface to remove an entry referencing an
+existing build tree once :command:`export(PACKAGE)` has been invoked.
+However, if the project removes its package configuration file from the build
+tree then the entry referencing the location will be considered stale.
diff --git a/share/cmake-3.6/Help/manual/cmake-policies.7.rst b/share/cmake-3.6/Help/manual/cmake-policies.7.rst
new file mode 100644
index 0000000..43f4637
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-policies.7.rst
@@ -0,0 +1,167 @@
+.. cmake-manual-description: CMake Policies Reference
+
+cmake-policies(7)
+*****************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+Policies in CMake are used to preserve backward compatible behavior
+across multiple releases.  When a new policy is introduced, newer CMake
+versions will begin to warn about the backward compatible behavior.  It
+is possible to disable the warning by explicitly requesting the OLD, or
+backward compatible behavior using the :command:`cmake_policy` command.
+It is also possible to request ``NEW``, or non-backward compatible behavior
+for a policy, also avoiding the warning.  Each policy can also be set to
+either ``NEW`` or ``OLD`` behavior explicitly on the command line with the
+:variable:`CMAKE_POLICY_DEFAULT_CMP<NNNN>` variable.
+
+A policy is a deprecation mechanism and not a reliable feature toggle.
+A policy should almost never be set to ``OLD``, except to silence warnings
+in an otherwise frozen or stable codebase, or temporarily as part of a
+larger migration path. The ``OLD`` behavior of each policy is undesirable
+and will be replaced with an error condition in a future release.
+
+The :command:`cmake_minimum_required` command does more than report an
+error if a too-old version of CMake is used to build a project.  It
+also sets all policies introduced in that CMake version or earlier to
+``NEW`` behavior.  To manage policies without increasing the minimum required
+CMake version, the :command:`if(POLICY)` command may be used:
+
+.. code-block:: cmake
+
+  if(POLICY CMP0990)
+    cmake_policy(SET CMP0990 NEW)
+  endif()
+
+This has the effect of using the ``NEW`` behavior with newer CMake releases which
+users may be using and not issuing a compatibility warning.
+
+The setting of a policy is confined in some cases to not propagate to the
+parent scope.  For example, if the files read by the :command:`include` command
+or the :command:`find_package` command contain a use of :command:`cmake_policy`,
+that policy setting will not affect the caller by default.  Both commands accept
+an optional ``NO_POLICY_SCOPE`` keyword to control this behavior.
+
+The :variable:`CMAKE_MINIMUM_REQUIRED_VERSION` variable may also be used
+to determine whether to report an error on use of deprecated macros or
+functions.
+
+Policies Introduced by CMake 3.4
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   CMP0065: Do not add flags to export symbols from executables without the ENABLE_EXPORTS target property. </policy/CMP0065>
+   CMP0064: Support new TEST if() operator. </policy/CMP0064>
+
+Policies Introduced by CMake 3.3
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   CMP0063: Honor visibility properties for all target types. </policy/CMP0063>
+   CMP0062: Disallow install() of export() result. </policy/CMP0062>
+   CMP0061: CTest does not by default tell make to ignore errors (-i). </policy/CMP0061>
+   CMP0060: Link libraries by full path even in implicit directories. </policy/CMP0060>
+   CMP0059: Do not treat DEFINITIONS as a built-in directory property. </policy/CMP0059>
+   CMP0058: Ninja requires custom command byproducts to be explicit. </policy/CMP0058>
+   CMP0057: Support new IN_LIST if() operator. </policy/CMP0057>
+
+Policies Introduced by CMake 3.2
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   CMP0056: Honor link flags in try_compile() source-file signature. </policy/CMP0056>
+   CMP0055: Strict checking for break() command. </policy/CMP0055>
+
+Policies Introduced by CMake 3.1
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   CMP0054: Only interpret if() arguments as variables or keywords when unquoted. </policy/CMP0054>
+   CMP0053: Simplify variable reference and escape sequence evaluation. </policy/CMP0053>
+   CMP0052: Reject source and build dirs in installed INTERFACE_INCLUDE_DIRECTORIES. </policy/CMP0052>
+   CMP0051: List TARGET_OBJECTS in SOURCES target property. </policy/CMP0051>
+
+Policies Introduced by CMake 3.0
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   CMP0050: Disallow add_custom_command SOURCE signatures. </policy/CMP0050>
+   CMP0049: Do not expand variables in target source entries. </policy/CMP0049>
+   CMP0048: project() command manages VERSION variables. </policy/CMP0048>
+   CMP0047: Use QCC compiler id for the qcc drivers on QNX. </policy/CMP0047>
+   CMP0046: Error on non-existent dependency in add_dependencies. </policy/CMP0046>
+   CMP0045: Error on non-existent target in get_target_property. </policy/CMP0045>
+   CMP0044: Case sensitive Lang_COMPILER_ID generator expressions. </policy/CMP0044>
+   CMP0043: Ignore COMPILE_DEFINITIONS_Config properties. </policy/CMP0043>
+   CMP0042: MACOSX_RPATH is enabled by default. </policy/CMP0042>
+   CMP0041: Error on relative include with generator expression. </policy/CMP0041>
+   CMP0040: The target in the TARGET signature of add_custom_command() must exist. </policy/CMP0040>
+   CMP0039: Utility targets may not have link dependencies. </policy/CMP0039>
+   CMP0038: Targets may not link directly to themselves. </policy/CMP0038>
+   CMP0037: Target names should not be reserved and should match a validity pattern. </policy/CMP0037>
+   CMP0036: The build_name command should not be called. </policy/CMP0036>
+   CMP0035: The variable_requires command should not be called. </policy/CMP0035>
+   CMP0034: The utility_source command should not be called. </policy/CMP0034>
+   CMP0033: The export_library_dependencies command should not be called. </policy/CMP0033>
+   CMP0032: The output_required_files command should not be called. </policy/CMP0032>
+   CMP0031: The load_command command should not be called. </policy/CMP0031>
+   CMP0030: The use_mangled_mesa command should not be called. </policy/CMP0030>
+   CMP0029: The subdir_depends command should not be called. </policy/CMP0029>
+   CMP0028: Double colon in target name means ALIAS or IMPORTED target. </policy/CMP0028>
+   CMP0027: Conditionally linked imported targets with missing include directories. </policy/CMP0027>
+   CMP0026: Disallow use of the LOCATION target property. </policy/CMP0026>
+   CMP0025: Compiler id for Apple Clang is now AppleClang. </policy/CMP0025>
+   CMP0024: Disallow include export result. </policy/CMP0024>
+
+Policies Introduced by CMake 2.8
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   CMP0023: Plain and keyword target_link_libraries signatures cannot be mixed. </policy/CMP0023>
+   CMP0022: INTERFACE_LINK_LIBRARIES defines the link interface. </policy/CMP0022>
+   CMP0021: Fatal error on relative paths in INCLUDE_DIRECTORIES target property. </policy/CMP0021>
+   CMP0020: Automatically link Qt executables to qtmain target on Windows. </policy/CMP0020>
+   CMP0019: Do not re-expand variables in include and link information. </policy/CMP0019>
+   CMP0018: Ignore CMAKE_SHARED_LIBRARY_Lang_FLAGS variable. </policy/CMP0018>
+   CMP0017: Prefer files from the CMake module directory when including from there. </policy/CMP0017>
+   CMP0016: target_link_libraries() reports error if its only argument is not a target. </policy/CMP0016>
+   CMP0015: link_directories() treats paths relative to the source dir. </policy/CMP0015>
+   CMP0014: Input directories must have CMakeLists.txt. </policy/CMP0014>
+   CMP0013: Duplicate binary directories are not allowed. </policy/CMP0013>
+   CMP0012: if() recognizes numbers and boolean constants. </policy/CMP0012>
+
+Policies Introduced by CMake 2.6
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   CMP0011: Included scripts do automatic cmake_policy PUSH and POP. </policy/CMP0011>
+   CMP0010: Bad variable reference syntax is an error. </policy/CMP0010>
+   CMP0009: FILE GLOB_RECURSE calls should not follow symlinks by default. </policy/CMP0009>
+   CMP0008: Libraries linked by full-path must have a valid library file name. </policy/CMP0008>
+   CMP0007: list command no longer ignores empty elements. </policy/CMP0007>
+   CMP0006: Installing MACOSX_BUNDLE targets requires a BUNDLE DESTINATION. </policy/CMP0006>
+   CMP0005: Preprocessor definition values are now escaped automatically. </policy/CMP0005>
+   CMP0004: Libraries linked may not have leading or trailing whitespace. </policy/CMP0004>
+   CMP0003: Libraries linked via full path no longer produce linker search paths. </policy/CMP0003>
+   CMP0002: Logical target names must be globally unique. </policy/CMP0002>
+   CMP0001: CMAKE_BACKWARDS_COMPATIBILITY should no longer be used. </policy/CMP0001>
+   CMP0000: A minimum required CMake version must be specified. </policy/CMP0000>
diff --git a/share/cmake-3.6/Help/manual/cmake-properties.7.rst b/share/cmake-3.6/Help/manual/cmake-properties.7.rst
new file mode 100644
index 0000000..3403dcd
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-properties.7.rst
@@ -0,0 +1,406 @@
+.. cmake-manual-description: CMake Properties Reference
+
+cmake-properties(7)
+*******************
+
+.. only:: html
+
+   .. contents::
+
+.. _`Global Properties`:
+
+Properties of Global Scope
+==========================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_gbl/ALLOW_DUPLICATE_CUSTOM_TARGETS
+   /prop_gbl/AUTOGEN_TARGETS_FOLDER
+   /prop_gbl/AUTOMOC_TARGETS_FOLDER
+   /prop_gbl/CMAKE_C_KNOWN_FEATURES
+   /prop_gbl/CMAKE_CXX_KNOWN_FEATURES
+   /prop_gbl/DEBUG_CONFIGURATIONS
+   /prop_gbl/DISABLED_FEATURES
+   /prop_gbl/ENABLED_FEATURES
+   /prop_gbl/ENABLED_LANGUAGES
+   /prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS
+   /prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING
+   /prop_gbl/GLOBAL_DEPENDS_DEBUG_MODE
+   /prop_gbl/GLOBAL_DEPENDS_NO_CYCLES
+   /prop_gbl/IN_TRY_COMPILE
+   /prop_gbl/PACKAGES_FOUND
+   /prop_gbl/PACKAGES_NOT_FOUND
+   /prop_gbl/JOB_POOLS
+   /prop_gbl/PREDEFINED_TARGETS_FOLDER
+   /prop_gbl/ECLIPSE_EXTRA_NATURES
+   /prop_gbl/REPORT_UNDEFINED_PROPERTIES
+   /prop_gbl/RULE_LAUNCH_COMPILE
+   /prop_gbl/RULE_LAUNCH_CUSTOM
+   /prop_gbl/RULE_LAUNCH_LINK
+   /prop_gbl/RULE_MESSAGES
+   /prop_gbl/TARGET_ARCHIVES_MAY_BE_SHARED_LIBS
+   /prop_gbl/TARGET_MESSAGES
+   /prop_gbl/TARGET_SUPPORTS_SHARED_LIBS
+   /prop_gbl/USE_FOLDERS
+
+.. _`Directory Properties`:
+
+Properties on Directories
+=========================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_dir/ADDITIONAL_MAKE_CLEAN_FILES
+   /prop_dir/CACHE_VARIABLES
+   /prop_dir/CLEAN_NO_CUSTOM
+   /prop_dir/CMAKE_CONFIGURE_DEPENDS
+   /prop_dir/COMPILE_DEFINITIONS
+   /prop_dir/COMPILE_OPTIONS
+   /prop_dir/DEFINITIONS
+   /prop_dir/EXCLUDE_FROM_ALL
+   /prop_dir/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
+   /prop_dir/INCLUDE_DIRECTORIES
+   /prop_dir/INCLUDE_REGULAR_EXPRESSION
+   /prop_dir/INTERPROCEDURAL_OPTIMIZATION_CONFIG
+   /prop_dir/INTERPROCEDURAL_OPTIMIZATION
+   /prop_dir/LINK_DIRECTORIES
+   /prop_dir/LISTFILE_STACK
+   /prop_dir/MACROS
+   /prop_dir/PARENT_DIRECTORY
+   /prop_dir/RULE_LAUNCH_COMPILE
+   /prop_dir/RULE_LAUNCH_CUSTOM
+   /prop_dir/RULE_LAUNCH_LINK
+   /prop_dir/TEST_INCLUDE_FILE
+   /prop_dir/VARIABLES
+   /prop_dir/VS_GLOBAL_SECTION_POST_section
+   /prop_dir/VS_GLOBAL_SECTION_PRE_section
+   /prop_dir/VS_STARTUP_PROJECT
+
+.. _`Target Properties`:
+
+Properties on Targets
+=====================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_tgt/ALIASED_TARGET
+   /prop_tgt/ANDROID_ANT_ADDITIONAL_OPTIONS
+   /prop_tgt/ANDROID_API
+   /prop_tgt/ANDROID_API_MIN
+   /prop_tgt/ANDROID_ARCH
+   /prop_tgt/ANDROID_ASSETS_DIRECTORIES
+   /prop_tgt/ANDROID_GUI
+   /prop_tgt/ANDROID_JAR_DEPENDENCIES
+   /prop_tgt/ANDROID_JAR_DIRECTORIES
+   /prop_tgt/ANDROID_JAVA_SOURCE_DIR
+   /prop_tgt/ANDROID_NATIVE_LIB_DEPENDENCIES
+   /prop_tgt/ANDROID_NATIVE_LIB_DIRECTORIES
+   /prop_tgt/ANDROID_PROCESS_MAX
+   /prop_tgt/ANDROID_PROGUARD
+   /prop_tgt/ANDROID_PROGUARD_CONFIG_PATH
+   /prop_tgt/ANDROID_SECURE_PROPS_PATH
+   /prop_tgt/ANDROID_SKIP_ANT_STEP
+   /prop_tgt/ANDROID_STL_TYPE
+   /prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG
+   /prop_tgt/ARCHIVE_OUTPUT_DIRECTORY
+   /prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG
+   /prop_tgt/ARCHIVE_OUTPUT_NAME
+   /prop_tgt/AUTOGEN_TARGET_DEPENDS
+   /prop_tgt/AUTOMOC_MOC_OPTIONS
+   /prop_tgt/AUTOMOC
+   /prop_tgt/AUTOUIC
+   /prop_tgt/AUTOUIC_OPTIONS
+   /prop_tgt/AUTORCC
+   /prop_tgt/AUTORCC_OPTIONS
+   /prop_tgt/BINARY_DIR
+   /prop_tgt/BUILD_WITH_INSTALL_RPATH
+   /prop_tgt/BUNDLE_EXTENSION
+   /prop_tgt/BUNDLE
+   /prop_tgt/C_EXTENSIONS
+   /prop_tgt/C_STANDARD
+   /prop_tgt/C_STANDARD_REQUIRED
+   /prop_tgt/COMPATIBLE_INTERFACE_BOOL
+   /prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MAX
+   /prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MIN
+   /prop_tgt/COMPATIBLE_INTERFACE_STRING
+   /prop_tgt/COMPILE_DEFINITIONS
+   /prop_tgt/COMPILE_FEATURES
+   /prop_tgt/COMPILE_FLAGS
+   /prop_tgt/COMPILE_OPTIONS
+   /prop_tgt/COMPILE_PDB_NAME
+   /prop_tgt/COMPILE_PDB_NAME_CONFIG
+   /prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY
+   /prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG
+   /prop_tgt/CONFIG_OUTPUT_NAME
+   /prop_tgt/CONFIG_POSTFIX
+   /prop_tgt/CROSSCOMPILING_EMULATOR
+   /prop_tgt/CXX_EXTENSIONS
+   /prop_tgt/CXX_STANDARD
+   /prop_tgt/CXX_STANDARD_REQUIRED
+   /prop_tgt/DEBUG_POSTFIX
+   /prop_tgt/DEFINE_SYMBOL
+   /prop_tgt/DEPLOYMENT_REMOTE_DIRECTORY
+   /prop_tgt/EchoString
+   /prop_tgt/ENABLE_EXPORTS
+   /prop_tgt/EXCLUDE_FROM_ALL
+   /prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD_CONFIG
+   /prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD
+   /prop_tgt/EXPORT_NAME
+   /prop_tgt/FOLDER
+   /prop_tgt/Fortran_FORMAT
+   /prop_tgt/Fortran_MODULE_DIRECTORY
+   /prop_tgt/FRAMEWORK
+   /prop_tgt/FRAMEWORK_VERSION
+   /prop_tgt/GENERATOR_FILE_NAME
+   /prop_tgt/GNUtoMS
+   /prop_tgt/HAS_CXX
+   /prop_tgt/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
+   /prop_tgt/IMPORTED_CONFIGURATIONS
+   /prop_tgt/IMPORTED_IMPLIB_CONFIG
+   /prop_tgt/IMPORTED_IMPLIB
+   /prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES_CONFIG
+   /prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES
+   /prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES_CONFIG
+   /prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES
+   /prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES_CONFIG
+   /prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES
+   /prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY_CONFIG
+   /prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY
+   /prop_tgt/IMPORTED_LOCATION_CONFIG
+   /prop_tgt/IMPORTED_LOCATION
+   /prop_tgt/IMPORTED_NO_SONAME_CONFIG
+   /prop_tgt/IMPORTED_NO_SONAME
+   /prop_tgt/IMPORTED
+   /prop_tgt/IMPORTED_SONAME_CONFIG
+   /prop_tgt/IMPORTED_SONAME
+   /prop_tgt/IMPORT_PREFIX
+   /prop_tgt/IMPORT_SUFFIX
+   /prop_tgt/INCLUDE_DIRECTORIES
+   /prop_tgt/INSTALL_NAME_DIR
+   /prop_tgt/INSTALL_RPATH
+   /prop_tgt/INSTALL_RPATH_USE_LINK_PATH
+   /prop_tgt/INTERFACE_AUTOUIC_OPTIONS
+   /prop_tgt/INTERFACE_COMPILE_DEFINITIONS
+   /prop_tgt/INTERFACE_COMPILE_FEATURES
+   /prop_tgt/INTERFACE_COMPILE_OPTIONS
+   /prop_tgt/INTERFACE_INCLUDE_DIRECTORIES
+   /prop_tgt/INTERFACE_LINK_LIBRARIES
+   /prop_tgt/INTERFACE_POSITION_INDEPENDENT_CODE
+   /prop_tgt/INTERFACE_SOURCES
+   /prop_tgt/INTERFACE_SYSTEM_INCLUDE_DIRECTORIES
+   /prop_tgt/INTERPROCEDURAL_OPTIMIZATION_CONFIG
+   /prop_tgt/INTERPROCEDURAL_OPTIMIZATION
+   /prop_tgt/IOS_INSTALL_COMBINED
+   /prop_tgt/JOB_POOL_COMPILE
+   /prop_tgt/JOB_POOL_LINK
+   /prop_tgt/LABELS
+   /prop_tgt/LANG_CLANG_TIDY
+   /prop_tgt/LANG_COMPILER_LAUNCHER
+   /prop_tgt/LANG_INCLUDE_WHAT_YOU_USE
+   /prop_tgt/LANG_VISIBILITY_PRESET
+   /prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG
+   /prop_tgt/LIBRARY_OUTPUT_DIRECTORY
+   /prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG
+   /prop_tgt/LIBRARY_OUTPUT_NAME
+   /prop_tgt/LINK_DEPENDS_NO_SHARED
+   /prop_tgt/LINK_DEPENDS
+   /prop_tgt/LINKER_LANGUAGE
+   /prop_tgt/LINK_FLAGS_CONFIG
+   /prop_tgt/LINK_FLAGS
+   /prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG
+   /prop_tgt/LINK_INTERFACE_LIBRARIES
+   /prop_tgt/LINK_INTERFACE_MULTIPLICITY_CONFIG
+   /prop_tgt/LINK_INTERFACE_MULTIPLICITY
+   /prop_tgt/LINK_LIBRARIES
+   /prop_tgt/LINK_SEARCH_END_STATIC
+   /prop_tgt/LINK_SEARCH_START_STATIC
+   /prop_tgt/LOCATION_CONFIG
+   /prop_tgt/LOCATION
+   /prop_tgt/MACOSX_BUNDLE_INFO_PLIST
+   /prop_tgt/MACOSX_BUNDLE
+   /prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST
+   /prop_tgt/MACOSX_RPATH
+   /prop_tgt/MAP_IMPORTED_CONFIG_CONFIG
+   /prop_tgt/NAME
+   /prop_tgt/NO_SONAME
+   /prop_tgt/NO_SYSTEM_FROM_IMPORTED
+   /prop_tgt/OSX_ARCHITECTURES_CONFIG
+   /prop_tgt/OSX_ARCHITECTURES
+   /prop_tgt/OUTPUT_NAME_CONFIG
+   /prop_tgt/OUTPUT_NAME
+   /prop_tgt/PDB_NAME_CONFIG
+   /prop_tgt/PDB_NAME
+   /prop_tgt/PDB_OUTPUT_DIRECTORY_CONFIG
+   /prop_tgt/PDB_OUTPUT_DIRECTORY
+   /prop_tgt/POSITION_INDEPENDENT_CODE
+   /prop_tgt/PREFIX
+   /prop_tgt/PRIVATE_HEADER
+   /prop_tgt/PROJECT_LABEL
+   /prop_tgt/PUBLIC_HEADER
+   /prop_tgt/RESOURCE
+   /prop_tgt/RULE_LAUNCH_COMPILE
+   /prop_tgt/RULE_LAUNCH_CUSTOM
+   /prop_tgt/RULE_LAUNCH_LINK
+   /prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG
+   /prop_tgt/RUNTIME_OUTPUT_DIRECTORY
+   /prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG
+   /prop_tgt/RUNTIME_OUTPUT_NAME
+   /prop_tgt/SKIP_BUILD_RPATH
+   /prop_tgt/SOURCE_DIR
+   /prop_tgt/SOURCES
+   /prop_tgt/SOVERSION
+   /prop_tgt/STATIC_LIBRARY_FLAGS_CONFIG
+   /prop_tgt/STATIC_LIBRARY_FLAGS
+   /prop_tgt/SUFFIX
+   /prop_tgt/TYPE
+   /prop_tgt/VERSION
+   /prop_tgt/VISIBILITY_INLINES_HIDDEN
+   /prop_tgt/VS_CONFIGURATION_TYPE
+   /prop_tgt/VS_DESKTOP_EXTENSIONS_VERSION
+   /prop_tgt/VS_DOTNET_REFERENCES
+   /prop_tgt/VS_DOTNET_TARGET_FRAMEWORK_VERSION
+   /prop_tgt/VS_GLOBAL_KEYWORD
+   /prop_tgt/VS_GLOBAL_PROJECT_TYPES
+   /prop_tgt/VS_GLOBAL_ROOTNAMESPACE
+   /prop_tgt/VS_GLOBAL_variable
+   /prop_tgt/VS_IOT_EXTENSIONS_VERSION
+   /prop_tgt/VS_IOT_STARTUP_TASK
+   /prop_tgt/VS_KEYWORD
+   /prop_tgt/VS_MOBILE_EXTENSIONS_VERSION
+   /prop_tgt/VS_SCC_AUXPATH
+   /prop_tgt/VS_SCC_LOCALPATH
+   /prop_tgt/VS_SCC_PROJECTNAME
+   /prop_tgt/VS_SCC_PROVIDER
+   /prop_tgt/VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION
+   /prop_tgt/VS_WINRT_COMPONENT
+   /prop_tgt/VS_WINRT_EXTENSIONS
+   /prop_tgt/VS_WINRT_REFERENCES
+   /prop_tgt/WIN32_EXECUTABLE
+   /prop_tgt/WINDOWS_EXPORT_ALL_SYMBOLS
+   /prop_tgt/XCODE_ATTRIBUTE_an-attribute
+   /prop_tgt/XCTEST
+
+.. _`Test Properties`:
+
+Properties on Tests
+===================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_test/ATTACHED_FILES_ON_FAIL
+   /prop_test/ATTACHED_FILES
+   /prop_test/COST
+   /prop_test/DEPENDS
+   /prop_test/ENVIRONMENT
+   /prop_test/FAIL_REGULAR_EXPRESSION
+   /prop_test/LABELS
+   /prop_test/MEASUREMENT
+   /prop_test/PASS_REGULAR_EXPRESSION
+   /prop_test/PROCESSORS
+   /prop_test/REQUIRED_FILES
+   /prop_test/RESOURCE_LOCK
+   /prop_test/RUN_SERIAL
+   /prop_test/SKIP_RETURN_CODE
+   /prop_test/TIMEOUT
+   /prop_test/TIMEOUT_AFTER_MATCH
+   /prop_test/WILL_FAIL
+   /prop_test/WORKING_DIRECTORY
+
+.. _`Source File Properties`:
+
+Properties on Source Files
+==========================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_sf/ABSTRACT
+   /prop_sf/AUTOUIC_OPTIONS
+   /prop_sf/AUTORCC_OPTIONS
+   /prop_sf/COMPILE_DEFINITIONS
+   /prop_sf/COMPILE_FLAGS
+   /prop_sf/EXTERNAL_OBJECT
+   /prop_sf/Fortran_FORMAT
+   /prop_sf/GENERATED
+   /prop_sf/HEADER_FILE_ONLY
+   /prop_sf/KEEP_EXTENSION
+   /prop_sf/LABELS
+   /prop_sf/LANGUAGE
+   /prop_sf/LOCATION
+   /prop_sf/MACOSX_PACKAGE_LOCATION
+   /prop_sf/OBJECT_DEPENDS
+   /prop_sf/OBJECT_OUTPUTS
+   /prop_sf/SYMBOLIC
+   /prop_sf/VS_DEPLOYMENT_CONTENT
+   /prop_sf/VS_DEPLOYMENT_LOCATION
+   /prop_sf/VS_SHADER_ENTRYPOINT
+   /prop_sf/VS_SHADER_FLAGS
+   /prop_sf/VS_SHADER_MODEL
+   /prop_sf/VS_SHADER_TYPE
+   /prop_sf/VS_XAML_TYPE
+   /prop_sf/WRAP_EXCLUDE
+   /prop_sf/XCODE_EXPLICIT_FILE_TYPE
+   /prop_sf/XCODE_LAST_KNOWN_FILE_TYPE
+
+.. _`Cache Entry Properties`:
+
+Properties on Cache Entries
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_cache/ADVANCED
+   /prop_cache/HELPSTRING
+   /prop_cache/MODIFIED
+   /prop_cache/STRINGS
+   /prop_cache/TYPE
+   /prop_cache/VALUE
+
+.. _`Installed File Properties`:
+
+Properties on Installed Files
+=============================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_inst/CPACK_DESKTOP_SHORTCUTS.rst
+   /prop_inst/CPACK_NEVER_OVERWRITE.rst
+   /prop_inst/CPACK_PERMANENT.rst
+   /prop_inst/CPACK_START_MENU_SHORTCUTS.rst
+   /prop_inst/CPACK_STARTUP_SHORTCUTS.rst
+   /prop_inst/CPACK_WIX_ACL.rst
+
+
+Deprecated Properties on Directories
+====================================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_dir/COMPILE_DEFINITIONS_CONFIG
+
+
+Deprecated Properties on Targets
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_tgt/COMPILE_DEFINITIONS_CONFIG
+   /prop_tgt/POST_INSTALL_SCRIPT
+   /prop_tgt/PRE_INSTALL_SCRIPT
+
+
+Deprecated Properties on Source Files
+=====================================
+
+.. toctree::
+   :maxdepth: 1
+
+   /prop_sf/COMPILE_DEFINITIONS_CONFIG
diff --git a/share/cmake-3.2/Help/manual/cmake-qt.7.rst b/share/cmake-3.6/Help/manual/cmake-qt.7.rst
similarity index 100%
rename from share/cmake-3.2/Help/manual/cmake-qt.7.rst
rename to share/cmake-3.6/Help/manual/cmake-qt.7.rst
diff --git a/share/cmake-3.6/Help/manual/cmake-toolchains.7.rst b/share/cmake-3.6/Help/manual/cmake-toolchains.7.rst
new file mode 100644
index 0000000..390220c
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-toolchains.7.rst
@@ -0,0 +1,325 @@
+.. cmake-manual-description: CMake Toolchains Reference
+
+cmake-toolchains(7)
+*******************
+
+.. only:: html
+
+   .. contents::
+
+Introduction
+============
+
+CMake uses a toolchain of utilities to compile, link libraries and create
+archives, and other tasks to drive the build. The toolchain utilities available
+are determined by the languages enabled. In normal builds, CMake automatically
+determines the toolchain for host builds based on system introspection and
+defaults. In cross-compiling scenarios, a toolchain file may be specified
+with information about compiler and utility paths.
+
+Languages
+=========
+
+Languages are enabled by the :command:`project` command.  Language-specific
+built-in variables, such as
+:variable:`CMAKE_CXX_COMPILER <CMAKE_<LANG>_COMPILER>`,
+:variable:`CMAKE_CXX_COMPILER_ID <CMAKE_<LANG>_COMPILER_ID>` etc are set by
+invoking the :command:`project` command.  If no project command
+is in the top-level CMakeLists file, one will be implicitly generated. By default
+the enabled languages are C and CXX:
+
+.. code-block:: cmake
+
+  project(C_Only C)
+
+A special value of NONE can also be used with the :command:`project` command
+to enable no languages:
+
+.. code-block:: cmake
+
+  project(MyProject NONE)
+
+The :command:`enable_language` command can be used to enable languages after the
+:command:`project` command:
+
+.. code-block:: cmake
+
+  enable_language(CXX)
+
+When a language is enabled, CMake finds a compiler for that language, and
+determines some information, such as the vendor and version of the compiler,
+the target architecture and bitwidth, the location of corresponding utilities
+etc.
+
+The :prop_gbl:`ENABLED_LANGUAGES` global property contains the languages which
+are currently enabled.
+
+Variables and Properties
+========================
+
+Several variables relate to the language components of a toolchain which are
+enabled. :variable:`CMAKE_<LANG>_COMPILER` is the full path to the compiler used
+for ``<LANG>``. :variable:`CMAKE_<LANG>_COMPILER_ID` is the identifier used
+by CMake for the compiler and :variable:`CMAKE_<LANG>_COMPILER_VERSION` is the
+version of the compiler.
+
+The :variable:`CMAKE_<LANG>_FLAGS` variables and the configuration-specific
+equivalents contain flags that will be added to the compile command when
+compiling a file of a particular language.
+
+As the linker is invoked by the compiler driver, CMake needs a way to determine
+which compiler to use to invoke the linker. This is calculated by the
+:prop_sf:`LANGUAGE` of source files in the target, and in the case of static
+libraries, the language of the dependent libraries. The choice CMake makes may
+be overridden with the :prop_tgt:`LINKER_LANGUAGE` target property.
+
+Toolchain Features
+==================
+
+CMake provides the :command:`try_compile` command and wrapper macros such as
+:module:`CheckCXXSourceCompiles`, :module:`CheckCXXSymbolExists` and
+:module:`CheckIncludeFile` to test capability and availability of various
+toolchain features. These APIs test the toolchain in some way and cache the
+result so that the test does not have to be performed again the next time
+CMake runs.
+
+Some toolchain features have built-in handling in CMake, and do not require
+compile-tests. For example, :prop_tgt:`POSITION_INDEPENDENT_CODE` allows
+specifying that a target should be built as position-independent code, if
+the compiler supports that feature. The :prop_tgt:`<LANG>_VISIBILITY_PRESET`
+and :prop_tgt:`VISIBILITY_INLINES_HIDDEN` target properties add flags for
+hidden visibility, if supported by the compiler.
+
+.. _`Cross Compiling Toolchain`:
+
+Cross Compiling
+===============
+
+If :manual:`cmake(1)` is invoked with the command line parameter
+``-DCMAKE_TOOLCHAIN_FILE=path/to/file``, the file will be loaded early to set
+values for the compilers.
+The :variable:`CMAKE_CROSSCOMPILING` variable is set to true when CMake is
+cross-compiling.
+
+Cross Compiling for Linux
+-------------------------
+
+A typical cross-compiling toolchain for Linux has content such
+as:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME Linux)
+  set(CMAKE_SYSTEM_PROCESSOR arm)
+
+  set(CMAKE_SYSROOT /home/devel/rasp-pi-rootfs)
+  set(CMAKE_STAGING_PREFIX /home/devel/stage)
+
+  set(tools /home/devel/gcc-4.7-linaro-rpi-gnueabihf)
+  set(CMAKE_C_COMPILER ${tools}/bin/arm-linux-gnueabihf-gcc)
+  set(CMAKE_CXX_COMPILER ${tools}/bin/arm-linux-gnueabihf-g++)
+
+  set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
+  set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
+  set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
+  set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY)
+
+The :variable:`CMAKE_SYSTEM_NAME` is the CMake-identifier of the target platform
+to build for.
+
+The :variable:`CMAKE_SYSTEM_PROCESSOR` is the CMake-identifier of the target architecture
+to build for.
+
+The :variable:`CMAKE_SYSROOT` is optional, and may be specified if a sysroot
+is available.
+
+The :variable:`CMAKE_STAGING_PREFIX` is also optional. It may be used to specify
+a path on the host to install to. The :variable:`CMAKE_INSTALL_PREFIX` is always
+the runtime installation location, even when cross-compiling.
+
+The :variable:`CMAKE_<LANG>_COMPILER` variables may be set to full paths, or to
+names of compilers to search for in standard locations.   For toolchains that
+do not support linking binaries without custom flags or scripts one may set
+the :variable:`CMAKE_TRY_COMPILE_TARGET_TYPE` variable to ``STATIC_LIBRARY``
+to tell CMake not to try to link executables during its checks.
+
+CMake ``find_*`` commands will look in the sysroot, and the :variable:`CMAKE_FIND_ROOT_PATH`
+entries by default in all cases, as well as looking in the host system root prefix.
+Although this can be controlled on a case-by-case basis, when cross-compiling, it
+can be useful to exclude looking in either the host or the target for particular
+artifacts. Generally, includes, libraries and packages should be found in the
+target system prefixes, whereas executables which must be run as part of the build
+should be found only on the host and not on the target. This is the purpose of
+the ``CMAKE_FIND_ROOT_PATH_MODE_*`` variables.
+
+.. _`Cray Cross-Compile`:
+
+Cross Compiling for the Cray Linux Environment
+----------------------------------------------
+
+Cross compiling for compute nodes in the Cray Linux Environment can be done
+without needing a separate toolchain file.  Specifying
+``-DCMAKE_SYSTEM_NAME=CrayLinuxEnvironment`` on the CMake command line will
+ensure that the appropriate build settings and search paths are configured.
+The platform will pull its configuration from the current environment
+variables and will configure a project to use the compiler wrappers from the
+Cray Programming Environment's ``PrgEnv-*`` modules if present and loaded.
+
+The default configuration of the Cray Programming Environment is to only
+support static libraries.  This can be overridden and shared libraries
+enabled by setting the ``CRAYPE_LINK_TYPE`` environment variable to
+``dynamic``.
+
+Running CMake without specifying :variable:`CMAKE_SYSTEM_NAME` will
+run the configure step in host mode assuming a standard Linux environment.
+If not overridden, the ``PrgEnv-*`` compiler wrappers will end up getting used,
+which if targeting the either the login node or compute node, is likely not the
+desired behavior.  The exception to this would be if you are building directly
+on a NID instead of cross-compiling from a login node. If trying to build
+software for a login node, you will need to either first unload the
+currently loaded ``PrgEnv-*`` module or explicitly tell CMake to use the
+system compilers in ``/usr/bin`` instead of the Cray wrappers.  If instead
+targeting a compute node is desired, just specify the
+:variable:`CMAKE_SYSTEM_NAME` as mentioned above.
+
+Cross Compiling using Clang
+---------------------------
+
+Some compilers such as Clang are inherently cross compilers.
+The :variable:`CMAKE_<LANG>_COMPILER_TARGET` can be set to pass a
+value to those supported compilers when compiling:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME Linux)
+  set(CMAKE_SYSTEM_PROCESSOR arm)
+
+  set(triple arm-linux-gnueabihf)
+
+  set(CMAKE_C_COMPILER clang)
+  set(CMAKE_C_COMPILER_TARGET ${triple})
+  set(CMAKE_CXX_COMPILER clang++)
+  set(CMAKE_CXX_COMPILER_TARGET ${triple})
+
+Similarly, some compilers do not ship their own supplementary utilities
+such as linkers, but provide a way to specify the location of the external
+toolchain which will be used by the compiler driver. The
+:variable:`CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN` variable can be set in a
+toolchain file to pass the path to the compiler driver.
+
+Cross Compiling for QNX
+-----------------------
+
+As the Clang compiler the QNX QCC compile is inherently a cross compiler.
+And the :variable:`CMAKE_<LANG>_COMPILER_TARGET` can be set to pass a
+value to those supported compilers when compiling:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME QNX)
+
+  set(arch gcc_ntoarmv7le)
+
+  set(CMAKE_C_COMPILER qcc)
+  set(CMAKE_C_COMPILER_TARGET ${arch})
+  set(CMAKE_CXX_COMPILER QCC)
+  set(CMAKE_CXX_COMPILER_TARGET ${arch})
+
+Cross Compiling for Windows CE
+------------------------------
+
+Cross compiling for Windows CE requires the corresponding SDK being
+installed on your system.  These SDKs are usually installed under
+``C:/Program Files (x86)/Windows CE Tools/SDKs``.
+
+A toolchain file to configure a Visual Studio generator for
+Windows CE may look like this:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME WindowsCE)
+
+  set(CMAKE_SYSTEM_VERSION 8.0)
+  set(CMAKE_SYSTEM_PROCESSOR arm)
+
+  set(CMAKE_GENERATOR_TOOLSET CE800) # Can be omitted for 8.0
+  set(CMAKE_GENERATOR_PLATFORM SDK_AM335X_SK_WEC2013_V310)
+
+The :variable:`CMAKE_GENERATOR_PLATFORM` tells the generator which SDK to use.
+Further :variable:`CMAKE_SYSTEM_VERSION` tells the generator what version of
+Windows CE to use.  Currently version 8.0 (Windows Embedded Compact 2013) is
+supported out of the box.  Other versions may require one to set
+:variable:`CMAKE_GENERATOR_TOOLSET` to the correct value.
+
+Cross Compiling for Windows 10 Universal Applications
+-----------------------------------------------------
+
+A toolchain file to configure a Visual Studio generator for a
+Windows 10 Universal Application may look like this:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME WindowsStore)
+  set(CMAKE_SYSTEM_VERSION 10.0)
+
+A Windows 10 Universal Application targets both Windows Store and
+Windows Phone.  Specify the :variable:`CMAKE_SYSTEM_VERSION` variable
+to be ``10.0`` to build with the latest available Windows 10 SDK.
+Specify a more specific version (e.g. ``10.0.10240.0`` for RTM)
+to build with the corresponding SDK.
+
+Cross Compiling for Windows Phone
+---------------------------------
+
+A toolchain file to configure a Visual Studio generator for
+Windows Phone may look like this:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME WindowsPhone)
+  set(CMAKE_SYSTEM_VERSION 8.1)
+
+Cross Compiling for Windows Store
+---------------------------------
+
+A toolchain file to configure a Visual Studio generator for
+Windows Store may look like this:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME WindowsStore)
+  set(CMAKE_SYSTEM_VERSION 8.1)
+
+Cross Compiling using NVIDIA Nsight Tegra
+-----------------------------------------
+
+A toolchain file to configure a Visual Studio generator to
+build using NVIDIA Nsight Tegra targeting Android may look
+like this:
+
+.. code-block:: cmake
+
+  set(CMAKE_SYSTEM_NAME Android)
+
+The :variable:`CMAKE_GENERATOR_TOOLSET` may be set to select
+the Nsight Tegra "Toolchain Version" value.
+
+See also target properties:
+
+* :prop_tgt:`ANDROID_ANT_ADDITIONAL_OPTIONS`
+* :prop_tgt:`ANDROID_API_MIN`
+* :prop_tgt:`ANDROID_API`
+* :prop_tgt:`ANDROID_ARCH`
+* :prop_tgt:`ANDROID_ASSETS_DIRECTORIES`
+* :prop_tgt:`ANDROID_GUI`
+* :prop_tgt:`ANDROID_JAR_DEPENDENCIES`
+* :prop_tgt:`ANDROID_JAR_DIRECTORIES`
+* :prop_tgt:`ANDROID_JAVA_SOURCE_DIR`
+* :prop_tgt:`ANDROID_NATIVE_LIB_DEPENDENCIES`
+* :prop_tgt:`ANDROID_NATIVE_LIB_DIRECTORIES`
+* :prop_tgt:`ANDROID_PROCESS_MAX`
+* :prop_tgt:`ANDROID_PROGUARD_CONFIG_PATH`
+* :prop_tgt:`ANDROID_PROGUARD`
+* :prop_tgt:`ANDROID_SECURE_PROPS_PATH`
+* :prop_tgt:`ANDROID_SKIP_ANT_STEP`
+* :prop_tgt:`ANDROID_STL_TYPE`
diff --git a/share/cmake-3.6/Help/manual/cmake-variables.7.rst b/share/cmake-3.6/Help/manual/cmake-variables.7.rst
new file mode 100644
index 0000000..85b8eae
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake-variables.7.rst
@@ -0,0 +1,461 @@
+.. cmake-manual-description: CMake Variables Reference
+
+cmake-variables(7)
+******************
+
+.. only:: html
+
+   .. contents::
+
+Variables that Provide Information
+==================================
+
+.. toctree::
+   :maxdepth: 1
+
+   /variable/CMAKE_ARGC
+   /variable/CMAKE_ARGV0
+   /variable/CMAKE_AR
+   /variable/CMAKE_BINARY_DIR
+   /variable/CMAKE_BUILD_TOOL
+   /variable/CMAKE_CACHEFILE_DIR
+   /variable/CMAKE_CACHE_MAJOR_VERSION
+   /variable/CMAKE_CACHE_MINOR_VERSION
+   /variable/CMAKE_CACHE_PATCH_VERSION
+   /variable/CMAKE_CFG_INTDIR
+   /variable/CMAKE_COMMAND
+   /variable/CMAKE_CROSSCOMPILING
+   /variable/CMAKE_CROSSCOMPILING_EMULATOR
+   /variable/CMAKE_CTEST_COMMAND
+   /variable/CMAKE_CURRENT_BINARY_DIR
+   /variable/CMAKE_CURRENT_LIST_DIR
+   /variable/CMAKE_CURRENT_LIST_FILE
+   /variable/CMAKE_CURRENT_LIST_LINE
+   /variable/CMAKE_CURRENT_SOURCE_DIR
+   /variable/CMAKE_DL_LIBS
+   /variable/CMAKE_EDIT_COMMAND
+   /variable/CMAKE_EXECUTABLE_SUFFIX
+   /variable/CMAKE_EXTRA_GENERATOR
+   /variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES
+   /variable/CMAKE_FIND_PACKAGE_NAME
+   /variable/CMAKE_GENERATOR
+   /variable/CMAKE_GENERATOR_PLATFORM
+   /variable/CMAKE_GENERATOR_TOOLSET
+   /variable/CMAKE_HOME_DIRECTORY
+   /variable/CMAKE_IMPORT_LIBRARY_PREFIX
+   /variable/CMAKE_IMPORT_LIBRARY_SUFFIX
+   /variable/CMAKE_JOB_POOL_COMPILE
+   /variable/CMAKE_JOB_POOL_LINK
+   /variable/CMAKE_LINK_LIBRARY_SUFFIX
+   /variable/CMAKE_LINK_SEARCH_END_STATIC
+   /variable/CMAKE_LINK_SEARCH_START_STATIC
+   /variable/CMAKE_MAJOR_VERSION
+   /variable/CMAKE_MAKE_PROGRAM
+   /variable/CMAKE_MATCH_COUNT
+   /variable/CMAKE_MINIMUM_REQUIRED_VERSION
+   /variable/CMAKE_MINOR_VERSION
+   /variable/CMAKE_PARENT_LIST_FILE
+   /variable/CMAKE_PATCH_VERSION
+   /variable/CMAKE_PROJECT_NAME
+   /variable/CMAKE_RANLIB
+   /variable/CMAKE_ROOT
+   /variable/CMAKE_SCRIPT_MODE_FILE
+   /variable/CMAKE_SHARED_LIBRARY_PREFIX
+   /variable/CMAKE_SHARED_LIBRARY_SUFFIX
+   /variable/CMAKE_SHARED_MODULE_PREFIX
+   /variable/CMAKE_SHARED_MODULE_SUFFIX
+   /variable/CMAKE_SIZEOF_VOID_P
+   /variable/CMAKE_SKIP_INSTALL_RULES
+   /variable/CMAKE_SKIP_RPATH
+   /variable/CMAKE_SOURCE_DIR
+   /variable/CMAKE_STATIC_LIBRARY_PREFIX
+   /variable/CMAKE_STATIC_LIBRARY_SUFFIX
+   /variable/CMAKE_TOOLCHAIN_FILE
+   /variable/CMAKE_TWEAK_VERSION
+   /variable/CMAKE_VERBOSE_MAKEFILE
+   /variable/CMAKE_VERSION
+   /variable/CMAKE_VS_DEVENV_COMMAND
+   /variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION
+   /variable/CMAKE_VS_MSBUILD_COMMAND
+   /variable/CMAKE_VS_NsightTegra_VERSION
+   /variable/CMAKE_VS_PLATFORM_NAME
+   /variable/CMAKE_VS_PLATFORM_TOOLSET
+   /variable/CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION
+   /variable/CMAKE_XCODE_PLATFORM_TOOLSET
+   /variable/PROJECT_BINARY_DIR
+   /variable/PROJECT-NAME_BINARY_DIR
+   /variable/PROJECT_NAME
+   /variable/PROJECT-NAME_SOURCE_DIR
+   /variable/PROJECT-NAME_VERSION
+   /variable/PROJECT-NAME_VERSION_MAJOR
+   /variable/PROJECT-NAME_VERSION_MINOR
+   /variable/PROJECT-NAME_VERSION_PATCH
+   /variable/PROJECT-NAME_VERSION_TWEAK
+   /variable/PROJECT_SOURCE_DIR
+   /variable/PROJECT_VERSION
+   /variable/PROJECT_VERSION_MAJOR
+   /variable/PROJECT_VERSION_MINOR
+   /variable/PROJECT_VERSION_PATCH
+   /variable/PROJECT_VERSION_TWEAK
+
+Variables that Change Behavior
+==============================
+
+.. toctree::
+   :maxdepth: 1
+
+   /variable/BUILD_SHARED_LIBS
+   /variable/CMAKE_ABSOLUTE_DESTINATION_FILES
+   /variable/CMAKE_APPBUNDLE_PATH
+   /variable/CMAKE_AUTOMOC_RELAXED_MODE
+   /variable/CMAKE_BACKWARDS_COMPATIBILITY
+   /variable/CMAKE_BUILD_TYPE
+   /variable/CMAKE_COLOR_MAKEFILE
+   /variable/CMAKE_CONFIGURATION_TYPES
+   /variable/CMAKE_DEBUG_TARGET_PROPERTIES
+   /variable/CMAKE_DEPENDS_IN_PROJECT_ONLY
+   /variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName
+   /variable/CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES
+   /variable/CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT
+   /variable/CMAKE_ECLIPSE_MAKE_ARGUMENTS
+   /variable/CMAKE_ECLIPSE_VERSION
+   /variable/CMAKE_ERROR_DEPRECATED
+   /variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
+   /variable/CMAKE_EXPORT_COMPILE_COMMANDS
+   /variable/CMAKE_EXPORT_NO_PACKAGE_REGISTRY
+   /variable/CMAKE_SYSROOT
+   /variable/CMAKE_FIND_APPBUNDLE
+   /variable/CMAKE_FIND_FRAMEWORK
+   /variable/CMAKE_FIND_LIBRARY_PREFIXES
+   /variable/CMAKE_FIND_LIBRARY_SUFFIXES
+   /variable/CMAKE_FIND_NO_INSTALL_PREFIX
+   /variable/CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY
+   /variable/CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY
+   /variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE
+   /variable/CMAKE_FIND_ROOT_PATH
+   /variable/CMAKE_FIND_ROOT_PATH_MODE_INCLUDE
+   /variable/CMAKE_FIND_ROOT_PATH_MODE_LIBRARY
+   /variable/CMAKE_FIND_ROOT_PATH_MODE_PACKAGE
+   /variable/CMAKE_FIND_ROOT_PATH_MODE_PROGRAM
+   /variable/CMAKE_FRAMEWORK_PATH
+   /variable/CMAKE_IGNORE_PATH
+   /variable/CMAKE_INCLUDE_PATH
+   /variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE
+   /variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE
+   /variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME
+   /variable/CMAKE_INSTALL_MESSAGE
+   /variable/CMAKE_INSTALL_PREFIX
+   /variable/CMAKE_LIBRARY_PATH
+   /variable/CMAKE_MFC_FLAG
+   /variable/CMAKE_MODULE_PATH
+   /variable/CMAKE_NOT_USING_CONFIG_FLAGS
+   /variable/CMAKE_POLICY_DEFAULT_CMPNNNN
+   /variable/CMAKE_POLICY_WARNING_CMPNNNN
+   /variable/CMAKE_PREFIX_PATH
+   /variable/CMAKE_PROGRAM_PATH
+   /variable/CMAKE_PROJECT_PROJECT-NAME_INCLUDE
+   /variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY
+   /variable/CMAKE_STAGING_PREFIX
+   /variable/CMAKE_SYSTEM_APPBUNDLE_PATH
+   /variable/CMAKE_SYSTEM_FRAMEWORK_PATH
+   /variable/CMAKE_SYSTEM_IGNORE_PATH
+   /variable/CMAKE_SYSTEM_INCLUDE_PATH
+   /variable/CMAKE_SYSTEM_LIBRARY_PATH
+   /variable/CMAKE_SYSTEM_PREFIX_PATH
+   /variable/CMAKE_SYSTEM_PROGRAM_PATH
+   /variable/CMAKE_USER_MAKE_RULES_OVERRIDE
+   /variable/CMAKE_WARN_DEPRECATED
+   /variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
+
+Variables that Describe the System
+==================================
+
+.. toctree::
+   :maxdepth: 1
+
+   /variable/APPLE
+   /variable/BORLAND
+   /variable/CMAKE_CL_64
+   /variable/CMAKE_COMPILER_2005
+   /variable/CMAKE_HOST_APPLE
+   /variable/CMAKE_HOST_SOLARIS
+   /variable/CMAKE_HOST_SYSTEM_NAME
+   /variable/CMAKE_HOST_SYSTEM_PROCESSOR
+   /variable/CMAKE_HOST_SYSTEM
+   /variable/CMAKE_HOST_SYSTEM_VERSION
+   /variable/CMAKE_HOST_UNIX
+   /variable/CMAKE_HOST_WIN32
+   /variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX
+   /variable/CMAKE_LIBRARY_ARCHITECTURE
+   /variable/CMAKE_OBJECT_PATH_MAX
+   /variable/CMAKE_SYSTEM_NAME
+   /variable/CMAKE_SYSTEM_PROCESSOR
+   /variable/CMAKE_SYSTEM
+   /variable/CMAKE_SYSTEM_VERSION
+   /variable/CYGWIN
+   /variable/ENV
+   /variable/GHS-MULTI
+   /variable/MINGW
+   /variable/MSVC10
+   /variable/MSVC11
+   /variable/MSVC12
+   /variable/MSVC14
+   /variable/MSVC60
+   /variable/MSVC70
+   /variable/MSVC71
+   /variable/MSVC80
+   /variable/MSVC90
+   /variable/MSVC_IDE
+   /variable/MSVC
+   /variable/MSVC_VERSION
+   /variable/UNIX
+   /variable/WIN32
+   /variable/WINCE
+   /variable/WINDOWS_PHONE
+   /variable/WINDOWS_STORE
+   /variable/XCODE_VERSION
+
+Variables that Control the Build
+================================
+
+.. toctree::
+   :maxdepth: 1
+
+   /variable/CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS
+   /variable/CMAKE_ANDROID_API
+   /variable/CMAKE_ANDROID_API_MIN
+   /variable/CMAKE_ANDROID_ARCH
+   /variable/CMAKE_ANDROID_ASSETS_DIRECTORIES
+   /variable/CMAKE_ANDROID_GUI
+   /variable/CMAKE_ANDROID_JAR_DEPENDENCIES
+   /variable/CMAKE_ANDROID_JAR_DIRECTORIES
+   /variable/CMAKE_ANDROID_JAVA_SOURCE_DIR
+   /variable/CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES
+   /variable/CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES
+   /variable/CMAKE_ANDROID_PROCESS_MAX
+   /variable/CMAKE_ANDROID_PROGUARD
+   /variable/CMAKE_ANDROID_PROGUARD_CONFIG_PATH
+   /variable/CMAKE_ANDROID_SECURE_PROPS_PATH
+   /variable/CMAKE_ANDROID_SKIP_ANT_STEP
+   /variable/CMAKE_ANDROID_STL_TYPE
+   /variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY
+   /variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY_CONFIG
+   /variable/CMAKE_AUTOMOC_MOC_OPTIONS
+   /variable/CMAKE_AUTOMOC
+   /variable/CMAKE_AUTORCC
+   /variable/CMAKE_AUTORCC_OPTIONS
+   /variable/CMAKE_AUTOUIC
+   /variable/CMAKE_AUTOUIC_OPTIONS
+   /variable/CMAKE_BUILD_WITH_INSTALL_RPATH
+   /variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY
+   /variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG
+   /variable/CMAKE_CONFIG_POSTFIX
+   /variable/CMAKE_DEBUG_POSTFIX
+   /variable/CMAKE_ENABLE_EXPORTS
+   /variable/CMAKE_EXE_LINKER_FLAGS_CONFIG
+   /variable/CMAKE_EXE_LINKER_FLAGS
+   /variable/CMAKE_Fortran_FORMAT
+   /variable/CMAKE_Fortran_MODULE_DIRECTORY
+   /variable/CMAKE_GNUtoMS
+   /variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE
+   /variable/CMAKE_INCLUDE_CURRENT_DIR
+   /variable/CMAKE_INSTALL_NAME_DIR
+   /variable/CMAKE_INSTALL_RPATH
+   /variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH
+   /variable/CMAKE_IOS_INSTALL_COMBINED
+   /variable/CMAKE_LANG_CLANG_TIDY
+   /variable/CMAKE_LANG_COMPILER_LAUNCHER
+   /variable/CMAKE_LANG_INCLUDE_WHAT_YOU_USE
+   /variable/CMAKE_LANG_VISIBILITY_PRESET
+   /variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY
+   /variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY_CONFIG
+   /variable/CMAKE_LIBRARY_PATH_FLAG
+   /variable/CMAKE_LINK_DEF_FILE_FLAG
+   /variable/CMAKE_LINK_DEPENDS_NO_SHARED
+   /variable/CMAKE_LINK_INTERFACE_LIBRARIES
+   /variable/CMAKE_LINK_LIBRARY_FILE_FLAG
+   /variable/CMAKE_LINK_LIBRARY_FLAG
+   /variable/CMAKE_MACOSX_BUNDLE
+   /variable/CMAKE_MACOSX_RPATH
+   /variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG
+   /variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG
+   /variable/CMAKE_MODULE_LINKER_FLAGS
+   /variable/CMAKE_NINJA_OUTPUT_PATH_PREFIX
+   /variable/CMAKE_NO_BUILTIN_CHRPATH
+   /variable/CMAKE_NO_SYSTEM_FROM_IMPORTED
+   /variable/CMAKE_OSX_ARCHITECTURES
+   /variable/CMAKE_OSX_DEPLOYMENT_TARGET
+   /variable/CMAKE_OSX_SYSROOT
+   /variable/CMAKE_PDB_OUTPUT_DIRECTORY
+   /variable/CMAKE_PDB_OUTPUT_DIRECTORY_CONFIG
+   /variable/CMAKE_POSITION_INDEPENDENT_CODE
+   /variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY
+   /variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY_CONFIG
+   /variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG
+   /variable/CMAKE_SHARED_LINKER_FLAGS
+   /variable/CMAKE_SKIP_BUILD_RPATH
+   /variable/CMAKE_SKIP_INSTALL_RPATH
+   /variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG
+   /variable/CMAKE_STATIC_LINKER_FLAGS
+   /variable/CMAKE_TRY_COMPILE_CONFIGURATION
+   /variable/CMAKE_TRY_COMPILE_PLATFORM_VARIABLES
+   /variable/CMAKE_TRY_COMPILE_TARGET_TYPE
+   /variable/CMAKE_USE_RELATIVE_PATHS
+   /variable/CMAKE_VISIBILITY_INLINES_HIDDEN
+   /variable/CMAKE_VS_INCLUDE_INSTALL_TO_DEFAULT_BUILD
+   /variable/CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS
+   /variable/CMAKE_WIN32_EXECUTABLE
+   /variable/CMAKE_XCODE_ATTRIBUTE_an-attribute
+   /variable/EXECUTABLE_OUTPUT_PATH
+   /variable/LIBRARY_OUTPUT_PATH
+
+Variables for Languages
+=======================
+
+.. toctree::
+   :maxdepth: 1
+
+   /variable/CMAKE_COMPILER_IS_GNULANG
+   /variable/CMAKE_C_COMPILE_FEATURES
+   /variable/CMAKE_C_EXTENSIONS
+   /variable/CMAKE_C_STANDARD
+   /variable/CMAKE_C_STANDARD_REQUIRED
+   /variable/CMAKE_CXX_COMPILE_FEATURES
+   /variable/CMAKE_CXX_EXTENSIONS
+   /variable/CMAKE_CXX_STANDARD
+   /variable/CMAKE_CXX_STANDARD_REQUIRED
+   /variable/CMAKE_Fortran_MODDIR_DEFAULT
+   /variable/CMAKE_Fortran_MODDIR_FLAG
+   /variable/CMAKE_Fortran_MODOUT_FLAG
+   /variable/CMAKE_INTERNAL_PLATFORM_ABI
+   /variable/CMAKE_LANG_ARCHIVE_APPEND
+   /variable/CMAKE_LANG_ARCHIVE_CREATE
+   /variable/CMAKE_LANG_ARCHIVE_FINISH
+   /variable/CMAKE_LANG_COMPILE_OBJECT
+   /variable/CMAKE_LANG_COMPILER_ABI
+   /variable/CMAKE_LANG_COMPILER_ID
+   /variable/CMAKE_LANG_COMPILER_LOADED
+   /variable/CMAKE_LANG_COMPILER
+   /variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN
+   /variable/CMAKE_LANG_COMPILER_TARGET
+   /variable/CMAKE_LANG_COMPILER_VERSION
+   /variable/CMAKE_LANG_CREATE_SHARED_LIBRARY
+   /variable/CMAKE_LANG_CREATE_SHARED_MODULE
+   /variable/CMAKE_LANG_CREATE_STATIC_LIBRARY
+   /variable/CMAKE_LANG_FLAGS_DEBUG
+   /variable/CMAKE_LANG_FLAGS_MINSIZEREL
+   /variable/CMAKE_LANG_FLAGS_RELEASE
+   /variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO
+   /variable/CMAKE_LANG_FLAGS
+   /variable/CMAKE_LANG_GHS_KERNEL_FLAGS_DEBUG
+   /variable/CMAKE_LANG_GHS_KERNEL_FLAGS_MINSIZEREL
+   /variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELEASE
+   /variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELWITHDEBINFO
+   /variable/CMAKE_LANG_IGNORE_EXTENSIONS
+   /variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES
+   /variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES
+   /variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
+   /variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES
+   /variable/CMAKE_LANG_LIBRARY_ARCHITECTURE
+   /variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES
+   /variable/CMAKE_LANG_LINKER_PREFERENCE
+   /variable/CMAKE_LANG_LINK_EXECUTABLE
+   /variable/CMAKE_LANG_OUTPUT_EXTENSION
+   /variable/CMAKE_LANG_PLATFORM_ID
+   /variable/CMAKE_LANG_SIMULATE_ID
+   /variable/CMAKE_LANG_SIMULATE_VERSION
+   /variable/CMAKE_LANG_SIZEOF_DATA_PTR
+   /variable/CMAKE_LANG_SOURCE_FILE_EXTENSIONS
+   /variable/CMAKE_LANG_STANDARD_INCLUDE_DIRECTORIES
+   /variable/CMAKE_LANG_STANDARD_LIBRARIES
+   /variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG
+
+Variables for CTest
+===================
+
+.. toctree::
+   :maxdepth: 1
+
+   /variable/CTEST_BINARY_DIRECTORY
+   /variable/CTEST_BUILD_COMMAND
+   /variable/CTEST_BUILD_NAME
+   /variable/CTEST_BZR_COMMAND
+   /variable/CTEST_BZR_UPDATE_OPTIONS
+   /variable/CTEST_CHANGE_ID
+   /variable/CTEST_CHECKOUT_COMMAND
+   /variable/CTEST_CONFIGURATION_TYPE
+   /variable/CTEST_CONFIGURE_COMMAND
+   /variable/CTEST_COVERAGE_COMMAND
+   /variable/CTEST_COVERAGE_EXTRA_FLAGS
+   /variable/CTEST_CURL_OPTIONS
+   /variable/CTEST_CUSTOM_COVERAGE_EXCLUDE
+   /variable/CTEST_CUSTOM_ERROR_EXCEPTION
+   /variable/CTEST_CUSTOM_ERROR_MATCH
+   /variable/CTEST_CUSTOM_ERROR_POST_CONTEXT
+   /variable/CTEST_CUSTOM_ERROR_PRE_CONTEXT
+   /variable/CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE
+   /variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_ERRORS
+   /variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS
+   /variable/CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE
+   /variable/CTEST_CUSTOM_MEMCHECK_IGNORE
+   /variable/CTEST_CUSTOM_POST_MEMCHECK
+   /variable/CTEST_CUSTOM_POST_TEST
+   /variable/CTEST_CUSTOM_PRE_MEMCHECK
+   /variable/CTEST_CUSTOM_PRE_TEST
+   /variable/CTEST_CUSTOM_TEST_IGNORE
+   /variable/CTEST_CUSTOM_WARNING_EXCEPTION
+   /variable/CTEST_CUSTOM_WARNING_MATCH
+   /variable/CTEST_CVS_CHECKOUT
+   /variable/CTEST_CVS_COMMAND
+   /variable/CTEST_CVS_UPDATE_OPTIONS
+   /variable/CTEST_DROP_LOCATION
+   /variable/CTEST_DROP_METHOD
+   /variable/CTEST_DROP_SITE
+   /variable/CTEST_DROP_SITE_CDASH
+   /variable/CTEST_DROP_SITE_PASSWORD
+   /variable/CTEST_DROP_SITE_USER
+   /variable/CTEST_EXTRA_COVERAGE_GLOB
+   /variable/CTEST_GIT_COMMAND
+   /variable/CTEST_GIT_INIT_SUBMODULES
+   /variable/CTEST_GIT_UPDATE_CUSTOM
+   /variable/CTEST_GIT_UPDATE_OPTIONS
+   /variable/CTEST_HG_COMMAND
+   /variable/CTEST_HG_UPDATE_OPTIONS
+   /variable/CTEST_MEMORYCHECK_COMMAND
+   /variable/CTEST_MEMORYCHECK_COMMAND_OPTIONS
+   /variable/CTEST_MEMORYCHECK_SANITIZER_OPTIONS
+   /variable/CTEST_MEMORYCHECK_SUPPRESSIONS_FILE
+   /variable/CTEST_MEMORYCHECK_TYPE
+   /variable/CTEST_NIGHTLY_START_TIME
+   /variable/CTEST_P4_CLIENT
+   /variable/CTEST_P4_COMMAND
+   /variable/CTEST_P4_OPTIONS
+   /variable/CTEST_P4_UPDATE_OPTIONS
+   /variable/CTEST_SCP_COMMAND
+   /variable/CTEST_SITE
+   /variable/CTEST_SOURCE_DIRECTORY
+   /variable/CTEST_SVN_COMMAND
+   /variable/CTEST_SVN_OPTIONS
+   /variable/CTEST_SVN_UPDATE_OPTIONS
+   /variable/CTEST_TEST_LOAD
+   /variable/CTEST_TEST_TIMEOUT
+   /variable/CTEST_TRIGGER_SITE
+   /variable/CTEST_UPDATE_COMMAND
+   /variable/CTEST_UPDATE_OPTIONS
+   /variable/CTEST_UPDATE_VERSION_ONLY
+   /variable/CTEST_USE_LAUNCHERS
+
+Variables for CPack
+===================
+
+.. toctree::
+   :maxdepth: 1
+
+   /variable/CPACK_ABSOLUTE_DESTINATION_FILES
+   /variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY
+   /variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
+   /variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY
+   /variable/CPACK_INSTALL_SCRIPT
+   /variable/CPACK_PACKAGING_INSTALL_PREFIX
+   /variable/CPACK_SET_DESTDIR
+   /variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
diff --git a/share/cmake-3.6/Help/manual/cmake.1.rst b/share/cmake-3.6/Help/manual/cmake.1.rst
new file mode 100644
index 0000000..65153af
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cmake.1.rst
@@ -0,0 +1,313 @@
+.. cmake-manual-description: CMake Command-Line Reference
+
+cmake(1)
+********
+
+Synopsis
+========
+
+.. parsed-literal::
+
+ cmake [<options>] (<path-to-source> | <path-to-existing-build>)
+ cmake [(-D <var>=<value>)...] -P <cmake-script-file>
+ cmake --build <dir> [<options>...] [-- <build-tool-options>...]
+ cmake -E <command> [<options>...]
+ cmake --find-package <options>...
+
+Description
+===========
+
+The "cmake" executable is the CMake command-line interface.  It may be
+used to configure projects in scripts.  Project configuration settings
+may be specified on the command line with the -D option.
+
+CMake is a cross-platform build system generator.  Projects specify
+their build process with platform-independent CMake listfiles included
+in each directory of a source tree with the name CMakeLists.txt.
+Users build a project by using CMake to generate a build system for a
+native tool on their platform.
+
+.. _`CMake Options`:
+
+Options
+=======
+
+.. include:: OPTIONS_BUILD.txt
+
+``-E <command> [<options>...]``
+ See `Command-Line Tool Mode`_.
+
+``-L[A][H]``
+ List non-advanced cached variables.
+
+ List cache variables will run CMake and list all the variables from
+ the CMake cache that are not marked as INTERNAL or ADVANCED.  This
+ will effectively display current CMake settings, which can then be
+ changed with -D option.  Changing some of the variables may result
+ in more variables being created.  If A is specified, then it will
+ display also advanced variables.  If H is specified, it will also
+ display help for each variable.
+
+``--build <dir>``
+ See `Build Tool Mode`_.
+
+``-N``
+ View mode only.
+
+ Only load the cache.  Do not actually run configure and generate
+ steps.
+
+``-P <file>``
+ Process script mode.
+
+ Process the given cmake file as a script written in the CMake
+ language.  No configure or generate step is performed and the cache
+ is not modified.  If variables are defined using -D, this must be
+ done before the -P argument.
+
+``--find-package``
+ See `Find-Package Tool Mode`_.
+
+``--graphviz=[file]``
+ Generate graphviz of dependencies, see CMakeGraphVizOptions.cmake for more.
+
+ Generate a graphviz input file that will contain all the library and
+ executable dependencies in the project.  See the documentation for
+ CMakeGraphVizOptions.cmake for more details.
+
+``--system-information [file]``
+ Dump information about this system.
+
+ Dump a wide range of information about the current system.  If run
+ from the top of a binary tree for a CMake project it will dump
+ additional information such as the cache, log files etc.
+
+``--debug-trycompile``
+ Do not delete the try_compile build tree. Only useful on one try_compile at a time.
+
+ Do not delete the files and directories created for try_compile
+ calls.  This is useful in debugging failed try_compiles.  It may
+ however change the results of the try-compiles as old junk from a
+ previous try-compile may cause a different test to either pass or
+ fail incorrectly.  This option is best used for one try-compile at a
+ time, and only when debugging.
+
+``--debug-output``
+ Put cmake in a debug mode.
+
+ Print extra information during the cmake run like stack traces with
+ message(send_error ) calls.
+
+``--trace``
+ Put cmake in trace mode.
+
+ Print a trace of all calls made and from where.
+
+``--trace-expand``
+ Put cmake in trace mode.
+
+ Like ``--trace``, but with variables expanded.
+
+``--warn-uninitialized``
+ Warn about uninitialized values.
+
+ Print a warning when an uninitialized variable is used.
+
+``--warn-unused-vars``
+ Warn about unused variables.
+
+ Find variables that are declared or set, but not used.
+
+``--no-warn-unused-cli``
+ Don't warn about command line options.
+
+ Don't find variables that are declared on the command line, but not
+ used.
+
+``--check-system-vars``
+ Find problems with variable usage in system files.
+
+ Normally, unused and uninitialized variables are searched for only
+ in CMAKE_SOURCE_DIR and CMAKE_BINARY_DIR.  This flag tells CMake to
+ warn about other files as well.
+
+.. include:: OPTIONS_HELP.txt
+
+Build Tool Mode
+===============
+
+CMake provides a command-line signature to build an already-generated
+project binary tree::
+
+ cmake --build <dir> [<options>...] [-- <build-tool-options>...]
+
+This abstracts a native build tool's command-line interface with the
+following options:
+
+``--build <dir>``
+  Project binary directory to be built.  This is required and must be first.
+
+``--target <tgt>``
+  Build ``<tgt>`` instead of default targets.  May only be specified once.
+
+``--config <cfg>``
+  For multi-configuration tools, choose configuration ``<cfg>``.
+
+``--clean-first``
+  Build target ``clean`` first, then build.
+  (To clean only, use ``--target clean``.)
+
+``--use-stderr``
+  Ignored.  Behavior is default in CMake >= 3.0.
+
+``--``
+  Pass remaining options to the native tool.
+
+Run ``cmake --build`` with no options for quick help.
+
+Command-Line Tool Mode
+======================
+
+CMake provides builtin command-line tools through the signature::
+
+ cmake -E <command> [<options>...]
+
+Run ``cmake -E`` or ``cmake -E help`` for a summary of commands.
+Available commands are:
+
+``chdir <dir> <cmd> [<arg>...]``
+  Change the current working directory and run a command.
+
+``compare_files <file1> <file2>``
+  Check if ``<file1>`` is same as ``<file2>``. If files are the same,
+  then returns 0, if not it returns 1.
+
+``copy <file>... <destination>``
+  Copy files to ``<destination>`` (either file or directory).
+  If multiple files are specified, the ``<destination>`` must be
+  directory and it must exist.
+
+``copy_directory <dir>... <destination>``
+  Copy directories to ``<destination>`` directory.
+  If ``<destination>`` directory does not exist it will be created.
+
+``copy_if_different <file>... <destination>``
+  Copy files to ``<destination>`` (either file or directory) if
+  they have changed.
+  If multiple files are specified, the ``<destination>`` must be
+  directory and it must exist.
+
+``echo [<string>...]``
+  Displays arguments as text.
+
+``echo_append [<string>...]``
+  Displays arguments as text but no new line.
+
+``env [--unset=NAME]... [NAME=VALUE]... COMMAND [ARG]...``
+  Run command in a modified environment.
+
+``environment``
+  Display the current environment variables.
+
+``make_directory <dir>...``
+  Create ``<dir>`` directories.  If necessary, create parent
+  directories too.  If a directory already exists it will be
+  silently ignored.
+
+``md5sum <file>...``
+  Create MD5 checksum of files in ``md5sum`` compatible format::
+
+     351abe79cd3800b38cdfb25d45015a15  file1.txt
+     052f86c15bbde68af55c7f7b340ab639  file2.txt
+
+``remove [-f] <file>...``
+  Remove the file(s), use ``-f`` to force it.  If a file does
+  not exist it will be silently ignored.
+
+``remove_directory <dir>``
+  Remove a directory and its contents.  If a directory does
+  not exist it will be silently ignored.
+
+``rename <oldname> <newname>``
+  Rename a file or directory (on one volume).
+
+``sleep <number>...``
+  Sleep for given number of seconds.
+
+``tar [cxt][vf][zjJ] file.tar [<options>...] [--] [<file>...]``
+  Create or extract a tar or zip archive.  Options are:
+
+  ``--``
+    Stop interpreting options and treat all remaining arguments
+    as file names even if they start in ``-``.
+  ``--files-from=<file>``
+    Read file names from the given file, one per line.
+    Blank lines are ignored.  Lines may not start in ``-``
+    except for ``--add-file=<name>`` to add files whose
+    names start in ``-``.
+  ``--mtime=<date>``
+    Specify modification time recorded in tarball entries.
+  ``--format=<format>``
+    Specify the format of the archive to be created.
+    Supported formats are: ``7zip``, ``gnutar``, ``pax``,
+    ``paxr`` (restricted pax, default), and ``zip``.
+
+``time <command> [<args>...]``
+  Run command and return elapsed time.
+
+``touch <file>``
+  Touch a file.
+
+``touch_nocreate <file>``
+  Touch a file if it exists but do not create it.  If a file does
+  not exist it will be silently ignored.
+
+UNIX-specific Command-Line Tools
+--------------------------------
+
+The following ``cmake -E`` commands are available only on UNIX:
+
+``create_symlink <old> <new>``
+  Create a symbolic link ``<new>`` naming ``<old>``.
+
+Windows-specific Command-Line Tools
+-----------------------------------
+
+The following ``cmake -E`` commands are available only on Windows:
+
+``delete_regv <key>``
+  Delete Windows registry value.
+
+``env_vs8_wince <sdkname>``
+  Displays a batch file which sets the environment for the provided
+  Windows CE SDK installed in VS2005.
+
+``env_vs9_wince <sdkname>``
+  Displays a batch file which sets the environment for the provided
+  Windows CE SDK installed in VS2008.
+
+``write_regv <key> <value>``
+  Write Windows registry value.
+
+Find-Package Tool Mode
+======================
+
+CMake provides a helper for Makefile-based projects with the signature::
+
+  cmake --find-package <options>...
+
+This runs in a pkg-config like mode.
+
+Search a package using :command:`find_package()` and print the resulting flags
+to stdout.  This can be used to use cmake instead of pkg-config to find
+installed libraries in plain Makefile-based projects or in autoconf-based
+projects (via ``share/aclocal/cmake.m4``).
+
+.. note::
+  This mode is not well-supported due to some technical limitations.
+  It is kept for compatibility but should not be used in new projects.
+
+See Also
+========
+
+.. include:: LINKS.txt
diff --git a/share/cmake-3.6/Help/manual/cpack.1.rst b/share/cmake-3.6/Help/manual/cpack.1.rst
new file mode 100644
index 0000000..4f9f28d
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/cpack.1.rst
@@ -0,0 +1,97 @@
+.. cmake-manual-description: CPack Command-Line Reference
+
+cpack(1)
+********
+
+Synopsis
+========
+
+.. parsed-literal::
+
+ cpack -G <generator> [<options>]
+
+Description
+===========
+
+The "cpack" executable is the CMake packaging program.
+CMake-generated build trees created for projects that use the
+INSTALL_* commands have packaging support.  This program will generate
+the package.
+
+CMake is a cross-platform build system generator.  Projects specify
+their build process with platform-independent CMake listfiles included
+in each directory of a source tree with the name CMakeLists.txt.
+Users build a project by using CMake to generate a build system for a
+native tool on their platform.
+
+Options
+=======
+
+``-G <generator>``
+ Use the specified generator to generate package.
+
+ CPack may support multiple native packaging systems on certain
+ platforms.  A generator is responsible for generating input files
+ for particular system and invoking that systems.  Possible generator
+ names are specified in the Generators section.
+
+``-C <Configuration>``
+ Specify the project configuration
+
+ This option specifies the configuration that the project was build
+ with, for example 'Debug', 'Release'.
+
+``-D <var>=<value>``
+ Set a CPack variable.
+
+ Set a variable that can be used by the generator.
+
+``--config <config file>``
+ Specify the config file.
+
+ Specify the config file to use to create the package.  By default
+ CPackConfig.cmake in the current directory will be used.
+
+``--verbose,-V``
+ enable verbose output
+
+ Run cpack with verbose output.
+
+``--debug``
+ enable debug output (for CPack developers)
+
+ Run cpack with debug output (for CPack developers).
+
+``-P <package name>``
+ override/define CPACK_PACKAGE_NAME
+
+ If the package name is not specified on cpack command line
+ thenCPack.cmake defines it as CMAKE_PROJECT_NAME
+
+``-R <package version>``
+ override/define CPACK_PACKAGE_VERSION
+
+ If version is not specified on cpack command line thenCPack.cmake
+ defines it from CPACK_PACKAGE_VERSION_[MAJOR|MINOR|PATCH]look into
+ CPack.cmake for detail
+
+``-B <package directory>``
+ override/define CPACK_PACKAGE_DIRECTORY
+
+ The directory where CPack will be doing its packaging work.The
+ resulting package will be found there.  Inside this directoryCPack
+ creates '_CPack_Packages' sub-directory which is theCPack temporary
+ directory.
+
+``--vendor <vendor name>``
+ override/define CPACK_PACKAGE_VENDOR
+
+ If vendor is not specified on cpack command line (or inside
+ CMakeLists.txt) thenCPack.cmake defines it with a default value
+
+.. include:: OPTIONS_HELP.txt
+
+See Also
+========
+
+.. include:: LINKS.txt
diff --git a/share/cmake-3.6/Help/manual/ctest.1.rst b/share/cmake-3.6/Help/manual/ctest.1.rst
new file mode 100644
index 0000000..e797333
--- /dev/null
+++ b/share/cmake-3.6/Help/manual/ctest.1.rst
@@ -0,0 +1,1034 @@
+.. cmake-manual-description: CTest Command-Line Reference
+
+ctest(1)
+********
+
+Synopsis
+========
+
+.. parsed-literal::
+
+ ctest [<options>]
+
+Description
+===========
+
+The "ctest" executable is the CMake test driver program.
+CMake-generated build trees created for projects that use the
+ENABLE_TESTING and ADD_TEST commands have testing support.  This
+program will run the tests and report results.
+
+Options
+=======
+
+``-C <cfg>, --build-config <cfg>``
+ Choose configuration to test.
+
+ Some CMake-generated build trees can have multiple build
+ configurations in the same tree.  This option can be used to specify
+ which one should be tested.  Example configurations are "Debug" and
+ "Release".
+
+``-V,--verbose``
+ Enable verbose output from tests.
+
+ Test output is normally suppressed and only summary information is
+ displayed.  This option will show all test output.
+
+``-VV,--extra-verbose``
+ Enable more verbose output from tests.
+
+ Test output is normally suppressed and only summary information is
+ displayed.  This option will show even more test output.
+
+``--debug``
+ Displaying more verbose internals of CTest.
+
+ This feature will result in a large number of output that is mostly
+ useful for debugging dashboard problems.
+
+``--output-on-failure``
+ Output anything outputted by the test program if the test should fail.
+ This option can also be enabled by setting the environment variable
+ ``CTEST_OUTPUT_ON_FAILURE``.
+
+``-F``
+ Enable failover.
+
+ This option allows ctest to resume a test set execution that was
+ previously interrupted.  If no interruption occurred, the -F option
+ will have no effect.
+
+``-j <jobs>, --parallel <jobs>``
+ Run the tests in parallel using the given number of jobs.
+
+ This option tells ctest to run the tests in parallel using given
+ number of jobs.  This option can also be set by setting the
+ environment variable ``CTEST_PARALLEL_LEVEL``.
+
+``--test-load <level>``
+ While running tests in parallel (e.g. with ``-j``), try not to start
+ tests when they may cause the CPU load to pass above a given threshold.
+
+ When ``ctest`` is run as a `Dashboard Client`_ this sets the
+ ``TestLoad`` option of the `CTest Test Step`_.
+
+``-Q,--quiet``
+ Make ctest quiet.
+
+ This option will suppress all the output.  The output log file will
+ still be generated if the --output-log is specified.  Options such
+ as --verbose, --extra-verbose, and --debug are ignored if --quiet is
+ specified.
+
+``-O <file>, --output-log <file>``
+ Output to log file
+
+ This option tells ctest to write all its output to a log file.
+
+``-N,--show-only``
+ Disable actual execution of tests.
+
+ This option tells ctest to list the tests that would be run but not
+ actually run them.  Useful in conjunction with the -R and -E
+ options.
+
+``-L <regex>, --label-regex <regex>``
+ Run tests with labels matching regular expression.
+
+ This option tells ctest to run only the tests whose labels match the
+ given regular expression.
+
+``-R <regex>, --tests-regex <regex>``
+ Run tests matching regular expression.
+
+ This option tells ctest to run only the tests whose names match the
+ given regular expression.
+
+``-E <regex>, --exclude-regex <regex>``
+ Exclude tests matching regular expression.
+
+ This option tells ctest to NOT run the tests whose names match the
+ given regular expression.
+
+``-LE <regex>, --label-exclude <regex>``
+ Exclude tests with labels matching regular expression.
+
+ This option tells ctest to NOT run the tests whose labels match the
+ given regular expression.
+
+``-D <dashboard>, --dashboard <dashboard>``
+ Execute dashboard test
+
+ This option tells ctest to act as a CDash client and perform a
+ dashboard test.  All tests are <Mode><Test>, where Mode can be
+ Experimental, Nightly, and Continuous, and Test can be Start,
+ Update, Configure, Build, Test, Coverage, and Submit.
+
+``-D <var>:<type>=<value>``
+ Define a variable for script mode
+
+ Pass in variable values on the command line.  Use in conjunction
+ with -S to pass variable values to a dashboard script.  Parsing -D
+ arguments as variable values is only attempted if the value
+ following -D does not match any of the known dashboard types.
+
+``-M <model>, --test-model <model>``
+ Sets the model for a dashboard
+
+ This option tells ctest to act as a CDash client where the TestModel
+ can be Experimental, Nightly, and Continuous.  Combining -M and -T
+ is similar to -D
+
+``-T <action>, --test-action <action>``
+ Sets the dashboard action to perform
+
+ This option tells ctest to act as a CDash client and perform some
+ action such as start, build, test etc.  Combining -M and -T is
+ similar to -D
+
+``--track <track>``
+ Specify the track to submit dashboard to
+
+ Submit dashboard to specified track instead of default one.  By
+ default, the dashboard is submitted to Nightly, Experimental, or
+ Continuous track, but by specifying this option, the track can be
+ arbitrary.
+
+``-S <script>, --script <script>``
+ Execute a dashboard for a configuration
+
+ This option tells ctest to load in a configuration script which sets
+ a number of parameters such as the binary and source directories.
+ Then ctest will do what is required to create and run a dashboard.
+ This option basically sets up a dashboard and then runs ctest -D
+ with the appropriate options.
+
+``-SP <script>, --script-new-process <script>``
+ Execute a dashboard for a configuration
+
+ This option does the same operations as -S but it will do them in a
+ separate process.  This is primarily useful in cases where the
+ script may modify the environment and you do not want the modified
+ environment to impact other -S scripts.
+
+``-A <file>, --add-notes <file>``
+ Add a notes file with submission
+
+ This option tells ctest to include a notes file when submitting
+ dashboard.
+
+``-I [Start,End,Stride,test#,test#|Test file], --tests-information``
+ Run a specific number of tests by number.
+
+ This option causes ctest to run tests starting at number Start,
+ ending at number End, and incrementing by Stride.  Any additional
+ numbers after Stride are considered individual test numbers.  Start,
+ End,or stride can be empty.  Optionally a file can be given that
+ contains the same syntax as the command line.
+
+``-U, --union``
+ Take the Union of -I and -R
+
+ When both -R and -I are specified by default the intersection of
+ tests are run.  By specifying -U the union of tests is run instead.
+
+``--rerun-failed``
+ Run only the tests that failed previously
+
+ This option tells ctest to perform only the tests that failed during
+ its previous run.  When this option is specified, ctest ignores all
+ other options intended to modify the list of tests to run (-L, -R,
+ -E, -LE, -I, etc).  In the event that CTest runs and no tests fail,
+ subsequent calls to ctest with the --rerun-failed option will run
+ the set of tests that most recently failed (if any).
+
+``--repeat-until-fail <n>``
+ Require each test to run ``<n>`` times without failing in order to pass.
+
+ This is useful in finding sporadic failures in test cases.
+
+``--max-width <width>``
+ Set the max width for a test name to output
+
+ Set the maximum width for each test name to show in the output.
+ This allows the user to widen the output to avoid clipping the test
+ name which can be very annoying.
+
+``--interactive-debug-mode [0|1]``
+ Set the interactive mode to 0 or 1.
+
+ This option causes ctest to run tests in either an interactive mode
+ or a non-interactive mode.  On Windows this means that in
+ non-interactive mode, all system debug pop up windows are blocked.
+ In dashboard mode (Experimental, Nightly, Continuous), the default
+ is non-interactive.  When just running tests not for a dashboard the
+ default is to allow popups and interactive debugging.
+
+``--no-label-summary``
+ Disable timing summary information for labels.
+
+ This option tells ctest not to print summary information for each
+ label associated with the tests run.  If there are no labels on the
+ tests, nothing extra is printed.
+
+``--build-and-test``
+ Configure, build and run a test.
+
+ This option tells ctest to configure (i.e.  run cmake on), build,
+ and or execute a test.  The configure and test steps are optional.
+ The arguments to this command line are the source and binary
+ directories.  By default this will run CMake on the Source/Bin
+ directories specified unless --build-nocmake is specified.
+ The --build-generator option *must* be provided to use
+ --build-and-test.  If --test-command is specified then that will be
+ run after the build is complete.  Other options that affect this
+ mode are --build-target --build-nocmake, --build-run-dir,
+ --build-two-config, --build-exe-dir,
+ --build-project,--build-noclean, --build-options
+
+``--build-target``
+ Specify a specific target to build.
+
+ This option goes with the --build-and-test option, if left out the
+ all target is built.
+
+``--build-nocmake``
+ Run the build without running cmake first.
+
+ Skip the cmake step.
+
+``--build-run-dir``
+ Specify directory to run programs from.
+
+ Directory where programs will be after it has been compiled.
+
+``--build-two-config``
+ Run CMake twice
+
+``--build-exe-dir``
+ Specify the directory for the executable.
+
+``--build-generator``
+ Specify the generator to use.
+
+``--build-generator-platform``
+ Specify the generator-specific platform.
+
+``--build-generator-toolset``
+ Specify the generator-specific toolset.
+
+``--build-project``
+ Specify the name of the project to build.
+
+``--build-makeprogram``
+ Override the make program chosen by CTest with a given one.
+
+``--build-noclean``
+ Skip the make clean step.
+
+``--build-config-sample``
+ A sample executable to use to determine the configuration
+
+ A sample executable to use to determine the configuration that
+ should be used.  e.g.  Debug/Release/etc
+
+``--build-options``
+ Add extra options to the build step.
+
+ This option must be the last option with the exception of
+ --test-command
+
+``--test-command``
+ The test to run with the --build-and-test option.
+
+``--test-output-size-passed <size>``
+ Limit the output for passed tests to <size> bytes.
+
+``--test-output-size-failed <size>``
+ Limit the output for failed tests to <size> bytes.
+
+``--test-timeout``
+ The time limit in seconds, internal use only.
+
+``--tomorrow-tag``
+ Nightly or experimental starts with next day tag.
+
+ This is useful if the build will not finish in one day.
+
+``--ctest-config``
+ The configuration file used to initialize CTest state when submitting dashboards.
+
+ This option tells CTest to use different initialization file instead
+ of CTestConfiguration.tcl.  This way multiple initialization files
+ can be used for example to submit to multiple dashboards.
+
+``--overwrite``
+ Overwrite CTest configuration option.
+
+ By default ctest uses configuration options from configuration file.
+ This option will overwrite the configuration option.
+
+``--extra-submit <file>[;<file>]``
+ Submit extra files to the dashboard.
+
+ This option will submit extra files to the dashboard.
+
+``--force-new-ctest-process``
+ Run child CTest instances as new processes
+
+ By default CTest will run child CTest instances within the same
+ process.  If this behavior is not desired, this argument will
+ enforce new processes for child CTest processes.
+
+``--schedule-random``
+ Use a random order for scheduling tests
+
+ This option will run the tests in a random order.  It is commonly
+ used to detect implicit dependencies in a test suite.
+
+``--submit-index``
+ Legacy option for old Dart2 dashboard server feature.
+ Do not use.
+
+``--timeout <seconds>``
+ Set a global timeout on all tests.
+
+ This option will set a global timeout on all tests that do not
+ already have a timeout set on them.
+
+``--stop-time <time>``
+ Set a time at which all tests should stop running.
+
+ Set a real time of day at which all tests should timeout.  Example:
+ 7:00:00 -0400.  Any time format understood by the curl date parser
+ is accepted.  Local time is assumed if no timezone is specified.
+
+``--http1.0``
+ Submit using HTTP 1.0.
+
+ This option will force CTest to use HTTP 1.0 to submit files to the
+ dashboard, instead of HTTP 1.1.
+
+``--no-compress-output``
+ Do not compress test output when submitting.
+
+ This flag will turn off automatic compression of test output.  Use
+ this to maintain compatibility with an older version of CDash which
+ doesn't support compressed test output.
+
+``--print-labels``
+ Print all available test labels.
+
+ This option will not run any tests, it will simply print the list of
+ all labels associated with the test set.
+
+.. include:: OPTIONS_HELP.txt
+
+.. _`Dashboard Client`:
+
+Dashboard Client
+================
+
+CTest can operate as a client for the `CDash`_ software quality dashboard
+application.  As a dashboard client, CTest performs a sequence of steps
+to configure, build, and test software, and then submits the results to
+a `CDash`_ server.
+
+.. _`CDash`: http://cdash.org/
+
+Dashboard Client Steps
+----------------------
+
+CTest defines an ordered list of testing steps of which some or all may
+be run as a dashboard client:
+
+``Start``
+  Start a new dashboard submission to be composed of results recorded
+  by the following steps.
+  See the `CTest Start Step`_ section below.
+
+``Update``
+  Update the source tree from its version control repository.
+  Record the old and new versions and the list of updated source files.
+  See the `CTest Update Step`_ section below.
+
+``Configure``
+  Configure the software by running a command in the build tree.
+  Record the configuration output log.
+  See the `CTest Configure Step`_ section below.
+
+``Build``
+  Build the software by running a command in the build tree.
+  Record the build output log and detect warnings and errors.
+  See the `CTest Build Step`_ section below.
+
+``Test``
+  Test the software by loading a ``CTestTestfile.cmake``
+  from the build tree and executing the defined tests.
+  Record the output and result of each test.
+  See the `CTest Test Step`_ section below.
+
+``Coverage``
+  Compute coverage of the source code by running a coverage
+  analysis tool and recording its output.
+  See the `CTest Coverage Step`_ section below.
+
+``MemCheck``
+  Run the software test suite through a memory check tool.
+  Record the test output, results, and issues reported by the tool.
+  See the `CTest MemCheck Step`_ section below.
+
+``Submit``
+  Submit results recorded from other testing steps to the
+  software quality dashboard server.
+  See the `CTest Submit Step`_ section below.
+
+Dashboard Client Modes
+----------------------
+
+CTest defines three modes of operation as a dashboard client:
+
+``Nightly``
+  This mode is intended to be invoked once per day, typically at night.
+  It enables the ``Start``, ``Update``, ``Configure``, ``Build``, ``Test``,
+  ``Coverage``, and ``Submit`` steps by default.  Selected steps run even
+  if the ``Update`` step reports no changes to the source tree.
+
+``Continuous``
+  This mode is intended to be invoked repeatedly throughout the day.
+  It enables the ``Start``, ``Update``, ``Configure``, ``Build``, ``Test``,
+  ``Coverage``, and ``Submit`` steps by default, but exits after the
+  ``Update`` step if it reports no changes to the source tree.
+
+``Experimental``
+  This mode is intended to be invoked by a developer to test local changes.
+  It enables the ``Start``, ``Configure``, ``Build``, ``Test``, ``Coverage``,
+  and ``Submit`` steps by default.
+
+Dashboard Client via CTest Command-Line
+---------------------------------------
+
+CTest can perform testing on an already-generated build tree.
+Run the ``ctest`` command with the current working directory set
+to the build tree and use one of these signatures::
+
+  ctest -D <mode>[<step>]
+  ctest -M <mode> [ -T <step> ]...
+
+The ``<mode>`` must be one of the above `Dashboard Client Modes`_,
+and each ``<step>`` must be one of the above `Dashboard Client Steps`_.
+
+CTest reads the `Dashboard Client Configuration`_ settings from
+a file in the build tree called either ``CTestConfiguration.ini``
+or ``DartConfiguration.tcl`` (the names are historical).  The format
+of the file is::
+
+  # Lines starting in '#' are comments.
+  # Other non-blank lines are key-value pairs.
+  <setting>: <value>
+
+where ``<setting>`` is the setting name and ``<value>`` is the
+setting value.
+
+In build trees generated by CMake, this configuration file is
+generated by the :module:`CTest` module if included by the project.
+The module uses variables to obtain a value for each setting
+as documented with the settings below.
+
+.. _`CTest Script`:
+
+Dashboard Client via CTest Script
+---------------------------------
+
+CTest can perform testing driven by a :manual:`cmake-language(7)`
+script that creates and maintains the source and build tree as
+well as performing the testing steps.  Run the ``ctest`` command
+with the current working directory set outside of any build tree
+and use one of these signatures::
+
+  ctest -S <script>
+  ctest -SP <script>
+
+The ``<script>`` file must call :ref:`CTest Commands` commands
+to run testing steps explicitly as documented below.  The commands
+obtain `Dashboard Client Configuration`_ settings from their
+arguments or from variables set in the script.
+
+Dashboard Client Configuration
+==============================
+
+The `Dashboard Client Steps`_ may be configured by named
+settings as documented in the following sections.
+
+.. _`CTest Start Step`:
+
+CTest Start Step
+----------------
+
+Start a new dashboard submission to be composed of results recorded
+by the following steps.
+
+In a `CTest Script`_, the :command:`ctest_start` command runs this step.
+Arguments to the command may specify some of the step settings.
+The command first runs the command-line specified by the
+``CTEST_CHECKOUT_COMMAND`` variable, if set, to initialize the source
+directory.
+
+Configuration settings include:
+
+``BuildDirectory``
+  The full path to the project build tree.
+
+  * `CTest Script`_ variable: :variable:`CTEST_BINARY_DIRECTORY`
+  * :module:`CTest` module variable: :variable:`PROJECT_BINARY_DIR`
+
+``SourceDirectory``
+  The full path to the project source tree.
+
+  * `CTest Script`_ variable: :variable:`CTEST_SOURCE_DIRECTORY`
+  * :module:`CTest` module variable: :variable:`PROJECT_SOURCE_DIR`
+
+.. _`CTest Update Step`:
+
+CTest Update Step
+-----------------
+
+In a `CTest Script`_, the :command:`ctest_update` command runs this step.
+Arguments to the command may specify some of the step settings.
+
+Configuration settings to specify the version control tool include:
+
+``BZRCommand``
+  ``bzr`` command-line tool to use if source tree is managed by Bazaar.
+
+  * `CTest Script`_ variable: :variable:`CTEST_BZR_COMMAND`
+  * :module:`CTest` module variable: none
+
+``BZRUpdateOptions``
+  Command-line options to the ``BZRCommand`` when updating the source.
+
+  * `CTest Script`_ variable: :variable:`CTEST_BZR_UPDATE_OPTIONS`
+  * :module:`CTest` module variable: none
+
+``CVSCommand``
+  ``cvs`` command-line tool to use if source tree is managed by CVS.
+
+  * `CTest Script`_ variable: :variable:`CTEST_CVS_COMMAND`
+  * :module:`CTest` module variable: ``CVSCOMMAND``
+
+``CVSUpdateOptions``
+  Command-line options to the ``CVSCommand`` when updating the source.
+
+  * `CTest Script`_ variable: :variable:`CTEST_CVS_UPDATE_OPTIONS`
+  * :module:`CTest` module variable: ``CVS_UPDATE_OPTIONS``
+
+``GITCommand``
+  ``git`` command-line tool to use if source tree is managed by Git.
+
+  * `CTest Script`_ variable: :variable:`CTEST_GIT_COMMAND`
+  * :module:`CTest` module variable: ``GITCOMMAND``
+
+  The source tree is updated by ``git fetch`` followed by
+  ``git reset --hard`` to the ``FETCH_HEAD``.  The result is the same
+  as ``git pull`` except that any local moficiations are overwritten.
+  Use ``GITUpdateCustom`` to specify a different approach.
+
+``GITInitSubmodules``
+  If set, CTest will update the repository's submodules before updating.
+
+  * `CTest Script`_ variable: :variable:`CTEST_GIT_INIT_SUBMODULES`
+  * :module:`CTest` module variable: ``CTEST_GIT_INIT_SUBMODULES``
+
+``GITUpdateCustom``
+  Specify a custom command line (as a semicolon-separated list) to run
+  in the source tree (Git work tree) to update it instead of running
+  the ``GITCommand``.
+
+  * `CTest Script`_ variable: :variable:`CTEST_GIT_UPDATE_CUSTOM`
+  * :module:`CTest` module variable: ``CTEST_GIT_UPDATE_CUSTOM``
+
+``GITUpdateOptions``
+  Command-line options to the ``GITCommand`` when updating the source.
+
+  * `CTest Script`_ variable: :variable:`CTEST_GIT_UPDATE_OPTIONS`
+  * :module:`CTest` module variable: ``GIT_UPDATE_OPTIONS``
+
+``HGCommand``
+  ``hg`` command-line tool to use if source tree is managed by Mercurial.
+
+  * `CTest Script`_ variable: :variable:`CTEST_HG_COMMAND`
+  * :module:`CTest` module variable: none
+
+``HGUpdateOptions``
+  Command-line options to the ``HGCommand`` when updating the source.
+
+  * `CTest Script`_ variable: :variable:`CTEST_HG_UPDATE_OPTIONS`
+  * :module:`CTest` module variable: none
+
+``P4Client``
+  Value of the ``-c`` option to the ``P4Command``.
+
+  * `CTest Script`_ variable: :variable:`CTEST_P4_CLIENT`
+  * :module:`CTest` module variable: ``CTEST_P4_CLIENT``
+
+``P4Command``
+  ``p4`` command-line tool to use if source tree is managed by Perforce.
+
+  * `CTest Script`_ variable: :variable:`CTEST_P4_COMMAND`
+  * :module:`CTest` module variable: ``P4COMMAND``
+
+``P4Options``
+  Command-line options to the ``P4Command`` for all invocations.
+
+  * `CTest Script`_ variable: :variable:`CTEST_P4_OPTIONS`
+  * :module:`CTest` module variable: ``CTEST_P4_OPTIONS``
+
+``P4UpdateCustom``
+  Specify a custom command line (as a semicolon-separated list) to run
+  in the source tree (Perforce tree) to update it instead of running
+  the ``P4Command``.
+
+  * `CTest Script`_ variable: none
+  * :module:`CTest` module variable: ``CTEST_P4_UPDATE_CUSTOM``
+
+``P4UpdateOptions``
+  Command-line options to the ``P4Command`` when updating the source.
+
+  * `CTest Script`_ variable: :variable:`CTEST_P4_UPDATE_OPTIONS`
+  * :module:`CTest` module variable: ``CTEST_P4_UPDATE_OPTIONS``
+
+``SVNCommand``
+  ``svn`` command-line tool to use if source tree is managed by Subversion.
+
+  * `CTest Script`_ variable: :variable:`CTEST_SVN_COMMAND`
+  * :module:`CTest` module variable: ``SVNCOMMAND``
+
+``SVNOptions``
+  Command-line options to the ``SVNCommand`` for all invocations.
+
+  * `CTest Script`_ variable: :variable:`CTEST_SVN_OPTIONS`
+  * :module:`CTest` module variable: ``CTEST_SVN_OPTIONS``
+
+``SVNUpdateOptions``
+  Command-line options to the ``SVNCommand`` when updating the source.
+
+  * `CTest Script`_ variable: :variable:`CTEST_SVN_UPDATE_OPTIONS`
+  * :module:`CTest` module variable: ``SVN_UPDATE_OPTIONS``
+
+``UpdateCommand``
+  Specify the version-control command-line tool to use without
+  detecting the VCS that manages the source tree.
+
+  * `CTest Script`_ variable: :variable:`CTEST_UPDATE_COMMAND`
+  * :module:`CTest` module variable: ``<VCS>COMMAND``
+    when ``UPDATE_TYPE`` is ``<vcs>``, else ``UPDATE_COMMAND``
+
+``UpdateOptions``
+  Command-line options to the ``UpdateCommand``.
+
+  * `CTest Script`_ variable: :variable:`CTEST_UPDATE_OPTIONS`
+  * :module:`CTest` module variable: ``<VCS>_UPDATE_OPTIONS``
+    when ``UPDATE_TYPE`` is ``<vcs>``, else ``UPDATE_OPTIONS``
+
+``UpdateType``
+  Specify the version-control system that manages the source
+  tree if it cannot be detected automatically.
+  The value may be ``bzr``, ``cvs``, ``git``, ``hg``,
+  ``p4``, or ``svn``.
+
+  * `CTest Script`_ variable: none, detected from source tree
+  * :module:`CTest` module variable: ``UPDATE_TYPE`` if set,
+    else ``CTEST_UPDATE_TYPE``
+
+``UpdateVersionOnly``
+  Specify that you want the version control update command to only
+  discover the current version that is checked out, and not to update
+  to a different version.
+
+  * `CTest Script`_ variable: :variable:`CTEST_UPDATE_VERSION_ONLY`
+
+
+
+Additional configuration settings include:
+
+``NightlyStartTime``
+  In the ``Nightly`` dashboard mode, specify the "nightly start time".
+  With centralized version control systems (``cvs`` and ``svn``),
+  the ``Update`` step checks out the version of the software as of
+  this time so that multiple clients choose a common version to test.
+  This is not well-defined in distributed version-control systems so
+  the setting is ignored.
+
+  * `CTest Script`_ variable: :variable:`CTEST_NIGHTLY_START_TIME`
+  * :module:`CTest` module variable: ``NIGHTLY_START_TIME`` if set,
+    else ``CTEST_NIGHTLY_START_TIME``
+
+.. _`CTest Configure Step`:
+
+CTest Configure Step
+--------------------
+
+In a `CTest Script`_, the :command:`ctest_configure` command runs this step.
+Arguments to the command may specify some of the step settings.
+
+Configuration settings include:
+
+``ConfigureCommand``
+  Command-line to launch the software configuration process.
+  It will be executed in the location specified by the
+  ``BuildDirectory`` setting.
+
+  * `CTest Script`_ variable: :variable:`CTEST_CONFIGURE_COMMAND`
+  * :module:`CTest` module variable: :variable:`CMAKE_COMMAND`
+    followed by :variable:`PROJECT_SOURCE_DIR`
+
+.. _`CTest Build Step`:
+
+CTest Build Step
+----------------
+
+In a `CTest Script`_, the :command:`ctest_build` command runs this step.
+Arguments to the command may specify some of the step settings.
+
+Configuration settings include:
+
+``DefaultCTestConfigurationType``
+  When the build system to be launched allows build-time selection
+  of the configuration (e.g. ``Debug``, ``Release``), this specifies
+  the default configuration to be built when no ``-C`` option is
+  given to the ``ctest`` command.  The value will be substituted into
+  the value of ``MakeCommand`` to replace the literal string
+  ``${CTEST_CONFIGURATION_TYPE}`` if it appears.
+
+  * `CTest Script`_ variable: :variable:`CTEST_CONFIGURATION_TYPE`
+  * :module:`CTest` module variable: ``DEFAULT_CTEST_CONFIGURATION_TYPE``,
+    initialized by the ``CMAKE_CONFIG_TYPE`` environment variable
+
+``MakeCommand``
+  Command-line to launch the software build process.
+  It will be executed in the location specified by the
+  ``BuildDirectory`` setting.
+
+  * `CTest Script`_ variable: :variable:`CTEST_BUILD_COMMAND`
+  * :module:`CTest` module variable: ``MAKECOMMAND``,
+    initialized by the :command:`build_command` command
+
+``UseLaunchers``
+  For build trees generated by CMake using one of the
+  :ref:`Makefile Generators` or the :generator:`Ninja`
+  generator, specify whether the
+  ``CTEST_USE_LAUNCHERS`` feature is enabled by the
+  :module:`CTestUseLaunchers` module (also included by the
+  :module:`CTest` module).  When enabled, the generated build
+  system wraps each invocation of the compiler, linker, or
+  custom command line with a "launcher" that communicates
+  with CTest via environment variables and files to report
+  granular build warning and error information.  Otherwise,
+  CTest must "scrape" the build output log for diagnostics.
+
+  * `CTest Script`_ variable: :variable:`CTEST_USE_LAUNCHERS`
+  * :module:`CTest` module variable: ``CTEST_USE_LAUNCHERS``
+
+.. _`CTest Test Step`:
+
+CTest Test Step
+---------------
+
+In a `CTest Script`_, the :command:`ctest_test` command runs this step.
+Arguments to the command may specify some of the step settings.
+
+Configuration settings include:
+
+``TestLoad``
+  While running tests in parallel (e.g. with ``-j``), try not to start
+  tests when they may cause the CPU load to pass above a given threshold.
+
+  * `CTest Script`_ variable: :variable:`CTEST_TEST_LOAD`
+  * :module:`CTest` module variable: ``CTEST_TEST_LOAD``
+
+``TimeOut``
+  The default timeout for each test if not specified by the
+  :prop_test:`TIMEOUT` test property.
+
+  * `CTest Script`_ variable: :variable:`CTEST_TEST_TIMEOUT`
+  * :module:`CTest` module variable: ``DART_TESTING_TIMEOUT``
+
+.. _`CTest Coverage Step`:
+
+CTest Coverage Step
+-------------------
+
+In a `CTest Script`_, the :command:`ctest_coverage` command runs this step.
+Arguments to the command may specify some of the step settings.
+
+Configuration settings include:
+
+``CoverageCommand``
+  Command-line tool to perform software coverage analysis.
+  It will be executed in the location specified by the
+  ``BuildDirectory`` setting.
+
+  * `CTest Script`_ variable: :variable:`CTEST_COVERAGE_COMMAND`
+  * :module:`CTest` module variable: ``COVERAGE_COMMAND``
+
+``CoverageExtraFlags``
+  Specify command-line options to the ``CoverageCommand`` tool.
+
+  * `CTest Script`_ variable: :variable:`CTEST_COVERAGE_EXTRA_FLAGS`
+  * :module:`CTest` module variable: ``COVERAGE_EXTRA_FLAGS``
+
+.. _`CTest MemCheck Step`:
+
+CTest MemCheck Step
+-------------------
+
+In a `CTest Script`_, the :command:`ctest_memcheck` command runs this step.
+Arguments to the command may specify some of the step settings.
+
+Configuration settings include:
+
+``MemoryCheckCommand``
+  Command-line tool to perform dynamic analysis.  Test command lines
+  will be launched through this tool.
+
+  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_COMMAND`
+  * :module:`CTest` module variable: ``MEMORYCHECK_COMMAND``
+
+``MemoryCheckCommandOptions``
+  Specify command-line options to the ``MemoryCheckCommand`` tool.
+  They will be placed prior to the test command line.
+
+  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_COMMAND_OPTIONS`
+  * :module:`CTest` module variable: ``MEMORYCHECK_COMMAND_OPTIONS``
+
+``MemoryCheckType``
+  Specify the type of memory checking to perform.
+
+  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_TYPE`
+  * :module:`CTest` module variable: ``MEMORYCHECK_TYPE``
+
+``MemoryCheckSanitizerOptions``
+  Specify options to sanitizers when running with a sanitize-enabled build.
+
+  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_SANITIZER_OPTIONS`
+  * :module:`CTest` module variable: ``MEMORYCHECK_SANITIZER_OPTIONS``
+
+``MemoryCheckSuppressionFile``
+  Specify a file containing suppression rules for the
+  ``MemoryCheckCommand`` tool.  It will be passed with options
+  appropriate to the tool.
+
+  * `CTest Script`_ variable: :variable:`CTEST_MEMORYCHECK_SUPPRESSIONS_FILE`
+  * :module:`CTest` module variable: ``MEMORYCHECK_SUPPRESSIONS_FILE``
+
+Additional configuration settings include:
+
+``BoundsCheckerCommand``
+  Specify a ``MemoryCheckCommand`` that is known to be command-line
+  compatible with Bounds Checker.
+
+  * `CTest Script`_ variable: none
+  * :module:`CTest` module variable: none
+
+``PurifyCommand``
+  Specify a ``MemoryCheckCommand`` that is known to be command-line
+  compatible with Purify.
+
+  * `CTest Script`_ variable: none
+  * :module:`CTest` module variable: ``PURIFYCOMMAND``
+
+``ValgrindCommand``
+  Specify a ``MemoryCheckCommand`` that is known to be command-line
+  compatible with Valgrind.
+
+  * `CTest Script`_ variable: none
+  * :module:`CTest` module variable: ``VALGRIND_COMMAND``
+
+``ValgrindCommandOptions``
+  Specify command-line options to the ``ValgrindCommand`` tool.
+  They will be placed prior to the test command line.
+
+  * `CTest Script`_ variable: none
+  * :module:`CTest` module variable: ``VALGRIND_COMMAND_OPTIONS``
+
+.. _`CTest Submit Step`:
+
+CTest Submit Step
+-----------------
+
+In a `CTest Script`_, the :command:`ctest_submit` command runs this step.
+Arguments to the command may specify some of the step settings.
+
+Configuration settings include:
+
+``BuildName``
+  Describe the dashboard client platform with a short string.
+  (Operating system, compiler, etc.)
+
+  * `CTest Script`_ variable: :variable:`CTEST_BUILD_NAME`
+  * :module:`CTest` module variable: ``BUILDNAME``
+
+``CDashVersion``
+  Specify the version of `CDash`_ on the server.
+
+  * `CTest Script`_ variable: none, detected from server
+  * :module:`CTest` module variable: ``CTEST_CDASH_VERSION``
+
+``CTestSubmitRetryCount``
+  Specify a number of attempts to retry submission on network failure.
+
+  * `CTest Script`_ variable: none,
+    use the :command:`ctest_submit` ``RETRY_COUNT`` option.
+  * :module:`CTest` module variable: ``CTEST_SUBMIT_RETRY_COUNT``
+
+``CTestSubmitRetryDelay``
+  Specify a delay before retrying submission on network failure.
+
+  * `CTest Script`_ variable: none,
+    use the :command:`ctest_submit` ``RETRY_DELAY`` option.
+  * :module:`CTest` module variable: ``CTEST_SUBMIT_RETRY_DELAY``
+
+``CurlOptions``
+  Specify a semicolon-separated list of options to control the
+  Curl library that CTest uses internally to connect to the
+  server.  Possible options are ``CURLOPT_SSL_VERIFYPEER_OFF``
+  and ``CURLOPT_SSL_VERIFYHOST_OFF``.
+
+  * `CTest Script`_ variable: :variable:`CTEST_CURL_OPTIONS`
+  * :module:`CTest` module variable: ``CTEST_CURL_OPTIONS``
+
+``DropLocation``
+  The path on the dashboard server to send the submission.
+
+  * `CTest Script`_ variable: :variable:`CTEST_DROP_LOCATION`
+  * :module:`CTest` module variable: ``DROP_LOCATION`` if set,
+    else ``CTEST_DROP_LOCATION``
+
+``DropMethod``
+  Specify the method by which results should be submitted to the
+  dashboard server.  The value may be ``cp``, ``ftp``, ``http``,
+  ``https``, ``scp``, or ``xmlrpc`` (if CMake was built with
+  support for it).
+
+  * `CTest Script`_ variable: :variable:`CTEST_DROP_METHOD`
+  * :module:`CTest` module variable: ``DROP_METHOD`` if set,
+    else ``CTEST_DROP_METHOD``
+
+``DropSite``
+  The dashboard server name
+  (for ``ftp``, ``http``, and ``https``, ``scp``, and ``xmlrpc``).
+
+  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE`
+  * :module:`CTest` module variable: ``DROP_SITE`` if set,
+    else ``CTEST_DROP_SITE``
+
+``DropSitePassword``
+  The dashboard server login password, if any
+  (for ``ftp``, ``http``, and ``https``).
+
+  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE_PASSWORD`
+  * :module:`CTest` module variable: ``DROP_SITE_PASSWORD`` if set,
+    else ``CTEST_DROP_SITE_PASWORD``
+
+``DropSiteUser``
+  The dashboard server login user name, if any
+  (for ``ftp``, ``http``, and ``https``).
+
+  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE_USER`
+  * :module:`CTest` module variable: ``DROP_SITE_USER`` if set,
+    else ``CTEST_DROP_SITE_USER``
+
+``IsCDash``
+  Specify whether the dashboard server is `CDash`_ or an older
+  dashboard server implementation requiring ``TriggerSite``.
+
+  * `CTest Script`_ variable: :variable:`CTEST_DROP_SITE_CDASH`
+  * :module:`CTest` module variable: ``CTEST_DROP_SITE_CDASH``
+
+``ScpCommand``
+  ``scp`` command-line tool to use when ``DropMethod`` is ``scp``.
+
+  * `CTest Script`_ variable: :variable:`CTEST_SCP_COMMAND`
+  * :module:`CTest` module variable: ``SCPCOMMAND``
+
+``Site``
+  Describe the dashboard client host site with a short string.
+  (Hostname, domain, etc.)
+
+  * `CTest Script`_ variable: :variable:`CTEST_SITE`
+  * :module:`CTest` module variable: ``SITE``,
+    initialized by the :command:`site_name` command
+
+``TriggerSite``
+  Legacy option to support older dashboard server implementations.
+  Not used when ``IsCDash`` is true.
+
+  * `CTest Script`_ variable: :variable:`CTEST_TRIGGER_SITE`
+  * :module:`CTest` module variable: ``TRIGGER_SITE`` if set,
+    else ``CTEST_TRIGGER_SITE``
+
+See Also
+========
+
+.. include:: LINKS.txt
diff --git a/share/cmake-3.2/Help/module/AddFileDependencies.rst b/share/cmake-3.6/Help/module/AddFileDependencies.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/AddFileDependencies.rst
rename to share/cmake-3.6/Help/module/AddFileDependencies.rst
diff --git a/share/cmake-3.2/Help/module/BundleUtilities.rst b/share/cmake-3.6/Help/module/BundleUtilities.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/BundleUtilities.rst
rename to share/cmake-3.6/Help/module/BundleUtilities.rst
diff --git a/share/cmake-3.2/Help/module/CMakeAddFortranSubdirectory.rst b/share/cmake-3.6/Help/module/CMakeAddFortranSubdirectory.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeAddFortranSubdirectory.rst
rename to share/cmake-3.6/Help/module/CMakeAddFortranSubdirectory.rst
diff --git a/share/cmake-3.2/Help/module/CMakeBackwardCompatibilityCXX.rst b/share/cmake-3.6/Help/module/CMakeBackwardCompatibilityCXX.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeBackwardCompatibilityCXX.rst
rename to share/cmake-3.6/Help/module/CMakeBackwardCompatibilityCXX.rst
diff --git a/share/cmake-3.2/Help/module/CMakeDependentOption.rst b/share/cmake-3.6/Help/module/CMakeDependentOption.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeDependentOption.rst
rename to share/cmake-3.6/Help/module/CMakeDependentOption.rst
diff --git a/share/cmake-3.2/Help/module/CMakeDetermineVSServicePack.rst b/share/cmake-3.6/Help/module/CMakeDetermineVSServicePack.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeDetermineVSServicePack.rst
rename to share/cmake-3.6/Help/module/CMakeDetermineVSServicePack.rst
diff --git a/share/cmake-3.2/Help/module/CMakeExpandImportedTargets.rst b/share/cmake-3.6/Help/module/CMakeExpandImportedTargets.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeExpandImportedTargets.rst
rename to share/cmake-3.6/Help/module/CMakeExpandImportedTargets.rst
diff --git a/share/cmake-3.2/Help/module/CMakeFindDependencyMacro.rst b/share/cmake-3.6/Help/module/CMakeFindDependencyMacro.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeFindDependencyMacro.rst
rename to share/cmake-3.6/Help/module/CMakeFindDependencyMacro.rst
diff --git a/share/cmake-3.2/Help/module/CMakeFindFrameworks.rst b/share/cmake-3.6/Help/module/CMakeFindFrameworks.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeFindFrameworks.rst
rename to share/cmake-3.6/Help/module/CMakeFindFrameworks.rst
diff --git a/share/cmake-3.2/Help/module/CMakeFindPackageMode.rst b/share/cmake-3.6/Help/module/CMakeFindPackageMode.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeFindPackageMode.rst
rename to share/cmake-3.6/Help/module/CMakeFindPackageMode.rst
diff --git a/share/cmake-3.2/Help/module/CMakeForceCompiler.rst b/share/cmake-3.6/Help/module/CMakeForceCompiler.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeForceCompiler.rst
rename to share/cmake-3.6/Help/module/CMakeForceCompiler.rst
diff --git a/share/cmake-3.2/Help/module/CMakeGraphVizOptions.rst b/share/cmake-3.6/Help/module/CMakeGraphVizOptions.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeGraphVizOptions.rst
rename to share/cmake-3.6/Help/module/CMakeGraphVizOptions.rst
diff --git a/share/cmake-3.2/Help/module/CMakePackageConfigHelpers.rst b/share/cmake-3.6/Help/module/CMakePackageConfigHelpers.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakePackageConfigHelpers.rst
rename to share/cmake-3.6/Help/module/CMakePackageConfigHelpers.rst
diff --git a/share/cmake-3.2/Help/module/CMakeParseArguments.rst b/share/cmake-3.6/Help/module/CMakeParseArguments.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeParseArguments.rst
rename to share/cmake-3.6/Help/module/CMakeParseArguments.rst
diff --git a/share/cmake-3.2/Help/module/CMakePrintHelpers.rst b/share/cmake-3.6/Help/module/CMakePrintHelpers.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakePrintHelpers.rst
rename to share/cmake-3.6/Help/module/CMakePrintHelpers.rst
diff --git a/share/cmake-3.2/Help/module/CMakePrintSystemInformation.rst b/share/cmake-3.6/Help/module/CMakePrintSystemInformation.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakePrintSystemInformation.rst
rename to share/cmake-3.6/Help/module/CMakePrintSystemInformation.rst
diff --git a/share/cmake-3.2/Help/module/CMakePushCheckState.rst b/share/cmake-3.6/Help/module/CMakePushCheckState.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakePushCheckState.rst
rename to share/cmake-3.6/Help/module/CMakePushCheckState.rst
diff --git a/share/cmake-3.2/Help/module/CMakeVerifyManifest.rst b/share/cmake-3.6/Help/module/CMakeVerifyManifest.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CMakeVerifyManifest.rst
rename to share/cmake-3.6/Help/module/CMakeVerifyManifest.rst
diff --git a/share/cmake-3.2/Help/module/CPack.rst b/share/cmake-3.6/Help/module/CPack.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPack.rst
rename to share/cmake-3.6/Help/module/CPack.rst
diff --git a/share/cmake-3.2/Help/module/CPackBundle.rst b/share/cmake-3.6/Help/module/CPackBundle.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackBundle.rst
rename to share/cmake-3.6/Help/module/CPackBundle.rst
diff --git a/share/cmake-3.2/Help/module/CPackComponent.rst b/share/cmake-3.6/Help/module/CPackComponent.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackComponent.rst
rename to share/cmake-3.6/Help/module/CPackComponent.rst
diff --git a/share/cmake-3.2/Help/module/CPackCygwin.rst b/share/cmake-3.6/Help/module/CPackCygwin.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackCygwin.rst
rename to share/cmake-3.6/Help/module/CPackCygwin.rst
diff --git a/share/cmake-3.2/Help/module/CPackDMG.rst b/share/cmake-3.6/Help/module/CPackDMG.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackDMG.rst
rename to share/cmake-3.6/Help/module/CPackDMG.rst
diff --git a/share/cmake-3.2/Help/module/CPackDeb.rst b/share/cmake-3.6/Help/module/CPackDeb.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackDeb.rst
rename to share/cmake-3.6/Help/module/CPackDeb.rst
diff --git a/share/cmake-3.2/Help/module/CPackIFW.rst b/share/cmake-3.6/Help/module/CPackIFW.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackIFW.rst
rename to share/cmake-3.6/Help/module/CPackIFW.rst
diff --git a/share/cmake-3.2/Help/module/CPackNSIS.rst b/share/cmake-3.6/Help/module/CPackNSIS.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackNSIS.rst
rename to share/cmake-3.6/Help/module/CPackNSIS.rst
diff --git a/share/cmake-3.2/Help/module/CPackPackageMaker.rst b/share/cmake-3.6/Help/module/CPackPackageMaker.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackPackageMaker.rst
rename to share/cmake-3.6/Help/module/CPackPackageMaker.rst
diff --git a/share/cmake-3.2/Help/module/CPackRPM.rst b/share/cmake-3.6/Help/module/CPackRPM.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackRPM.rst
rename to share/cmake-3.6/Help/module/CPackRPM.rst
diff --git a/share/cmake-3.2/Help/module/CPackWIX.rst b/share/cmake-3.6/Help/module/CPackWIX.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CPackWIX.rst
rename to share/cmake-3.6/Help/module/CPackWIX.rst
diff --git a/share/cmake-3.2/Help/module/CTest.rst b/share/cmake-3.6/Help/module/CTest.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CTest.rst
rename to share/cmake-3.6/Help/module/CTest.rst
diff --git a/share/cmake-3.2/Help/module/CTestCoverageCollectGCOV.rst b/share/cmake-3.6/Help/module/CTestCoverageCollectGCOV.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CTestCoverageCollectGCOV.rst
rename to share/cmake-3.6/Help/module/CTestCoverageCollectGCOV.rst
diff --git a/share/cmake-3.2/Help/module/CTestScriptMode.rst b/share/cmake-3.6/Help/module/CTestScriptMode.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CTestScriptMode.rst
rename to share/cmake-3.6/Help/module/CTestScriptMode.rst
diff --git a/share/cmake-3.2/Help/module/CTestUseLaunchers.rst b/share/cmake-3.6/Help/module/CTestUseLaunchers.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CTestUseLaunchers.rst
rename to share/cmake-3.6/Help/module/CTestUseLaunchers.rst
diff --git a/share/cmake-3.2/Help/module/CheckCCompilerFlag.rst b/share/cmake-3.6/Help/module/CheckCCompilerFlag.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckCCompilerFlag.rst
rename to share/cmake-3.6/Help/module/CheckCCompilerFlag.rst
diff --git a/share/cmake-3.2/Help/module/CheckCSourceCompiles.rst b/share/cmake-3.6/Help/module/CheckCSourceCompiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckCSourceCompiles.rst
rename to share/cmake-3.6/Help/module/CheckCSourceCompiles.rst
diff --git a/share/cmake-3.2/Help/module/CheckCSourceRuns.rst b/share/cmake-3.6/Help/module/CheckCSourceRuns.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckCSourceRuns.rst
rename to share/cmake-3.6/Help/module/CheckCSourceRuns.rst
diff --git a/share/cmake-3.2/Help/module/CheckCXXCompilerFlag.rst b/share/cmake-3.6/Help/module/CheckCXXCompilerFlag.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckCXXCompilerFlag.rst
rename to share/cmake-3.6/Help/module/CheckCXXCompilerFlag.rst
diff --git a/share/cmake-3.2/Help/module/CheckCXXSourceCompiles.rst b/share/cmake-3.6/Help/module/CheckCXXSourceCompiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckCXXSourceCompiles.rst
rename to share/cmake-3.6/Help/module/CheckCXXSourceCompiles.rst
diff --git a/share/cmake-3.2/Help/module/CheckCXXSourceRuns.rst b/share/cmake-3.6/Help/module/CheckCXXSourceRuns.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckCXXSourceRuns.rst
rename to share/cmake-3.6/Help/module/CheckCXXSourceRuns.rst
diff --git a/share/cmake-3.2/Help/module/CheckCXXSymbolExists.rst b/share/cmake-3.6/Help/module/CheckCXXSymbolExists.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckCXXSymbolExists.rst
rename to share/cmake-3.6/Help/module/CheckCXXSymbolExists.rst
diff --git a/share/cmake-3.6/Help/module/CheckFortranCompilerFlag.rst b/share/cmake-3.6/Help/module/CheckFortranCompilerFlag.rst
new file mode 100644
index 0000000..58bf6ec
--- /dev/null
+++ b/share/cmake-3.6/Help/module/CheckFortranCompilerFlag.rst
@@ -0,0 +1 @@
+.. cmake-module:: ../../Modules/CheckFortranCompilerFlag.cmake
diff --git a/share/cmake-3.2/Help/module/CheckFortranFunctionExists.rst b/share/cmake-3.6/Help/module/CheckFortranFunctionExists.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckFortranFunctionExists.rst
rename to share/cmake-3.6/Help/module/CheckFortranFunctionExists.rst
diff --git a/share/cmake-3.2/Help/module/CheckFortranSourceCompiles.rst b/share/cmake-3.6/Help/module/CheckFortranSourceCompiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckFortranSourceCompiles.rst
rename to share/cmake-3.6/Help/module/CheckFortranSourceCompiles.rst
diff --git a/share/cmake-3.2/Help/module/CheckFunctionExists.rst b/share/cmake-3.6/Help/module/CheckFunctionExists.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckFunctionExists.rst
rename to share/cmake-3.6/Help/module/CheckFunctionExists.rst
diff --git a/share/cmake-3.2/Help/module/CheckIncludeFile.rst b/share/cmake-3.6/Help/module/CheckIncludeFile.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckIncludeFile.rst
rename to share/cmake-3.6/Help/module/CheckIncludeFile.rst
diff --git a/share/cmake-3.2/Help/module/CheckIncludeFileCXX.rst b/share/cmake-3.6/Help/module/CheckIncludeFileCXX.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckIncludeFileCXX.rst
rename to share/cmake-3.6/Help/module/CheckIncludeFileCXX.rst
diff --git a/share/cmake-3.2/Help/module/CheckIncludeFiles.rst b/share/cmake-3.6/Help/module/CheckIncludeFiles.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckIncludeFiles.rst
rename to share/cmake-3.6/Help/module/CheckIncludeFiles.rst
diff --git a/share/cmake-3.2/Help/module/CheckLanguage.rst b/share/cmake-3.6/Help/module/CheckLanguage.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckLanguage.rst
rename to share/cmake-3.6/Help/module/CheckLanguage.rst
diff --git a/share/cmake-3.2/Help/module/CheckLibraryExists.rst b/share/cmake-3.6/Help/module/CheckLibraryExists.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckLibraryExists.rst
rename to share/cmake-3.6/Help/module/CheckLibraryExists.rst
diff --git a/share/cmake-3.2/Help/module/CheckPrototypeDefinition.rst b/share/cmake-3.6/Help/module/CheckPrototypeDefinition.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckPrototypeDefinition.rst
rename to share/cmake-3.6/Help/module/CheckPrototypeDefinition.rst
diff --git a/share/cmake-3.2/Help/module/CheckStructHasMember.rst b/share/cmake-3.6/Help/module/CheckStructHasMember.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckStructHasMember.rst
rename to share/cmake-3.6/Help/module/CheckStructHasMember.rst
diff --git a/share/cmake-3.2/Help/module/CheckSymbolExists.rst b/share/cmake-3.6/Help/module/CheckSymbolExists.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckSymbolExists.rst
rename to share/cmake-3.6/Help/module/CheckSymbolExists.rst
diff --git a/share/cmake-3.2/Help/module/CheckTypeSize.rst b/share/cmake-3.6/Help/module/CheckTypeSize.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckTypeSize.rst
rename to share/cmake-3.6/Help/module/CheckTypeSize.rst
diff --git a/share/cmake-3.2/Help/module/CheckVariableExists.rst b/share/cmake-3.6/Help/module/CheckVariableExists.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/CheckVariableExists.rst
rename to share/cmake-3.6/Help/module/CheckVariableExists.rst
diff --git a/share/cmake-3.2/Help/module/Dart.rst b/share/cmake-3.6/Help/module/Dart.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/Dart.rst
rename to share/cmake-3.6/Help/module/Dart.rst
diff --git a/share/cmake-3.2/Help/module/DeployQt4.rst b/share/cmake-3.6/Help/module/DeployQt4.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/DeployQt4.rst
rename to share/cmake-3.6/Help/module/DeployQt4.rst
diff --git a/share/cmake-3.2/Help/module/Documentation.rst b/share/cmake-3.6/Help/module/Documentation.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/Documentation.rst
rename to share/cmake-3.6/Help/module/Documentation.rst
diff --git a/share/cmake-3.2/Help/module/ExternalData.rst b/share/cmake-3.6/Help/module/ExternalData.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/ExternalData.rst
rename to share/cmake-3.6/Help/module/ExternalData.rst
diff --git a/share/cmake-3.2/Help/module/ExternalProject.rst b/share/cmake-3.6/Help/module/ExternalProject.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/ExternalProject.rst
rename to share/cmake-3.6/Help/module/ExternalProject.rst
diff --git a/share/cmake-3.2/Help/module/FeatureSummary.rst b/share/cmake-3.6/Help/module/FeatureSummary.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FeatureSummary.rst
rename to share/cmake-3.6/Help/module/FeatureSummary.rst
diff --git a/share/cmake-3.2/Help/module/FindALSA.rst b/share/cmake-3.6/Help/module/FindALSA.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindALSA.rst
rename to share/cmake-3.6/Help/module/FindALSA.rst
diff --git a/share/cmake-3.2/Help/module/FindASPELL.rst b/share/cmake-3.6/Help/module/FindASPELL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindASPELL.rst
rename to share/cmake-3.6/Help/module/FindASPELL.rst
diff --git a/share/cmake-3.2/Help/module/FindAVIFile.rst b/share/cmake-3.6/Help/module/FindAVIFile.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindAVIFile.rst
rename to share/cmake-3.6/Help/module/FindAVIFile.rst
diff --git a/share/cmake-3.2/Help/module/FindArmadillo.rst b/share/cmake-3.6/Help/module/FindArmadillo.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindArmadillo.rst
rename to share/cmake-3.6/Help/module/FindArmadillo.rst
diff --git a/share/cmake-3.2/Help/module/FindBISON.rst b/share/cmake-3.6/Help/module/FindBISON.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindBISON.rst
rename to share/cmake-3.6/Help/module/FindBISON.rst
diff --git a/share/cmake-3.2/Help/module/FindBLAS.rst b/share/cmake-3.6/Help/module/FindBLAS.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindBLAS.rst
rename to share/cmake-3.6/Help/module/FindBLAS.rst
diff --git a/share/cmake-3.2/Help/module/FindBZip2.rst b/share/cmake-3.6/Help/module/FindBZip2.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindBZip2.rst
rename to share/cmake-3.6/Help/module/FindBZip2.rst
diff --git a/share/cmake-3.2/Help/module/FindBacktrace.rst b/share/cmake-3.6/Help/module/FindBacktrace.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindBacktrace.rst
rename to share/cmake-3.6/Help/module/FindBacktrace.rst
diff --git a/share/cmake-3.2/Help/module/FindBoost.rst b/share/cmake-3.6/Help/module/FindBoost.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindBoost.rst
rename to share/cmake-3.6/Help/module/FindBoost.rst
diff --git a/share/cmake-3.2/Help/module/FindBullet.rst b/share/cmake-3.6/Help/module/FindBullet.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindBullet.rst
rename to share/cmake-3.6/Help/module/FindBullet.rst
diff --git a/share/cmake-3.2/Help/module/FindCABLE.rst b/share/cmake-3.6/Help/module/FindCABLE.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCABLE.rst
rename to share/cmake-3.6/Help/module/FindCABLE.rst
diff --git a/share/cmake-3.2/Help/module/FindCUDA.rst b/share/cmake-3.6/Help/module/FindCUDA.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCUDA.rst
rename to share/cmake-3.6/Help/module/FindCUDA.rst
diff --git a/share/cmake-3.2/Help/module/FindCURL.rst b/share/cmake-3.6/Help/module/FindCURL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCURL.rst
rename to share/cmake-3.6/Help/module/FindCURL.rst
diff --git a/share/cmake-3.2/Help/module/FindCVS.rst b/share/cmake-3.6/Help/module/FindCVS.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCVS.rst
rename to share/cmake-3.6/Help/module/FindCVS.rst
diff --git a/share/cmake-3.2/Help/module/FindCoin3D.rst b/share/cmake-3.6/Help/module/FindCoin3D.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCoin3D.rst
rename to share/cmake-3.6/Help/module/FindCoin3D.rst
diff --git a/share/cmake-3.2/Help/module/FindCups.rst b/share/cmake-3.6/Help/module/FindCups.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCups.rst
rename to share/cmake-3.6/Help/module/FindCups.rst
diff --git a/share/cmake-3.2/Help/module/FindCurses.rst b/share/cmake-3.6/Help/module/FindCurses.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCurses.rst
rename to share/cmake-3.6/Help/module/FindCurses.rst
diff --git a/share/cmake-3.2/Help/module/FindCxxTest.rst b/share/cmake-3.6/Help/module/FindCxxTest.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCxxTest.rst
rename to share/cmake-3.6/Help/module/FindCxxTest.rst
diff --git a/share/cmake-3.2/Help/module/FindCygwin.rst b/share/cmake-3.6/Help/module/FindCygwin.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindCygwin.rst
rename to share/cmake-3.6/Help/module/FindCygwin.rst
diff --git a/share/cmake-3.2/Help/module/FindDCMTK.rst b/share/cmake-3.6/Help/module/FindDCMTK.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindDCMTK.rst
rename to share/cmake-3.6/Help/module/FindDCMTK.rst
diff --git a/share/cmake-3.2/Help/module/FindDart.rst b/share/cmake-3.6/Help/module/FindDart.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindDart.rst
rename to share/cmake-3.6/Help/module/FindDart.rst
diff --git a/share/cmake-3.2/Help/module/FindDevIL.rst b/share/cmake-3.6/Help/module/FindDevIL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindDevIL.rst
rename to share/cmake-3.6/Help/module/FindDevIL.rst
diff --git a/share/cmake-3.2/Help/module/FindDoxygen.rst b/share/cmake-3.6/Help/module/FindDoxygen.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindDoxygen.rst
rename to share/cmake-3.6/Help/module/FindDoxygen.rst
diff --git a/share/cmake-3.2/Help/module/FindEXPAT.rst b/share/cmake-3.6/Help/module/FindEXPAT.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindEXPAT.rst
rename to share/cmake-3.6/Help/module/FindEXPAT.rst
diff --git a/share/cmake-3.2/Help/module/FindFLEX.rst b/share/cmake-3.6/Help/module/FindFLEX.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindFLEX.rst
rename to share/cmake-3.6/Help/module/FindFLEX.rst
diff --git a/share/cmake-3.2/Help/module/FindFLTK.rst b/share/cmake-3.6/Help/module/FindFLTK.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindFLTK.rst
rename to share/cmake-3.6/Help/module/FindFLTK.rst
diff --git a/share/cmake-3.2/Help/module/FindFLTK2.rst b/share/cmake-3.6/Help/module/FindFLTK2.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindFLTK2.rst
rename to share/cmake-3.6/Help/module/FindFLTK2.rst
diff --git a/share/cmake-3.2/Help/module/FindFreetype.rst b/share/cmake-3.6/Help/module/FindFreetype.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindFreetype.rst
rename to share/cmake-3.6/Help/module/FindFreetype.rst
diff --git a/share/cmake-3.2/Help/module/FindGCCXML.rst b/share/cmake-3.6/Help/module/FindGCCXML.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGCCXML.rst
rename to share/cmake-3.6/Help/module/FindGCCXML.rst
diff --git a/share/cmake-3.2/Help/module/FindGDAL.rst b/share/cmake-3.6/Help/module/FindGDAL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGDAL.rst
rename to share/cmake-3.6/Help/module/FindGDAL.rst
diff --git a/share/cmake-3.2/Help/module/FindGIF.rst b/share/cmake-3.6/Help/module/FindGIF.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGIF.rst
rename to share/cmake-3.6/Help/module/FindGIF.rst
diff --git a/share/cmake-3.2/Help/module/FindGLEW.rst b/share/cmake-3.6/Help/module/FindGLEW.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGLEW.rst
rename to share/cmake-3.6/Help/module/FindGLEW.rst
diff --git a/share/cmake-3.2/Help/module/FindGLUT.rst b/share/cmake-3.6/Help/module/FindGLUT.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGLUT.rst
rename to share/cmake-3.6/Help/module/FindGLUT.rst
diff --git a/share/cmake-3.2/Help/module/FindGSL.rst b/share/cmake-3.6/Help/module/FindGSL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGSL.rst
rename to share/cmake-3.6/Help/module/FindGSL.rst
diff --git a/share/cmake-3.2/Help/module/FindGTK.rst b/share/cmake-3.6/Help/module/FindGTK.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGTK.rst
rename to share/cmake-3.6/Help/module/FindGTK.rst
diff --git a/share/cmake-3.2/Help/module/FindGTK2.rst b/share/cmake-3.6/Help/module/FindGTK2.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGTK2.rst
rename to share/cmake-3.6/Help/module/FindGTK2.rst
diff --git a/share/cmake-3.2/Help/module/FindGTest.rst b/share/cmake-3.6/Help/module/FindGTest.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGTest.rst
rename to share/cmake-3.6/Help/module/FindGTest.rst
diff --git a/share/cmake-3.2/Help/module/FindGettext.rst b/share/cmake-3.6/Help/module/FindGettext.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGettext.rst
rename to share/cmake-3.6/Help/module/FindGettext.rst
diff --git a/share/cmake-3.2/Help/module/FindGit.rst b/share/cmake-3.6/Help/module/FindGit.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGit.rst
rename to share/cmake-3.6/Help/module/FindGit.rst
diff --git a/share/cmake-3.2/Help/module/FindGnuTLS.rst b/share/cmake-3.6/Help/module/FindGnuTLS.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGnuTLS.rst
rename to share/cmake-3.6/Help/module/FindGnuTLS.rst
diff --git a/share/cmake-3.2/Help/module/FindGnuplot.rst b/share/cmake-3.6/Help/module/FindGnuplot.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindGnuplot.rst
rename to share/cmake-3.6/Help/module/FindGnuplot.rst
diff --git a/share/cmake-3.2/Help/module/FindHDF5.rst b/share/cmake-3.6/Help/module/FindHDF5.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindHDF5.rst
rename to share/cmake-3.6/Help/module/FindHDF5.rst
diff --git a/share/cmake-3.2/Help/module/FindHSPELL.rst b/share/cmake-3.6/Help/module/FindHSPELL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindHSPELL.rst
rename to share/cmake-3.6/Help/module/FindHSPELL.rst
diff --git a/share/cmake-3.2/Help/module/FindHTMLHelp.rst b/share/cmake-3.6/Help/module/FindHTMLHelp.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindHTMLHelp.rst
rename to share/cmake-3.6/Help/module/FindHTMLHelp.rst
diff --git a/share/cmake-3.2/Help/module/FindHg.rst b/share/cmake-3.6/Help/module/FindHg.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindHg.rst
rename to share/cmake-3.6/Help/module/FindHg.rst
diff --git a/share/cmake-3.2/Help/module/FindITK.rst b/share/cmake-3.6/Help/module/FindITK.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindITK.rst
rename to share/cmake-3.6/Help/module/FindITK.rst
diff --git a/share/cmake-3.2/Help/module/FindIce.rst b/share/cmake-3.6/Help/module/FindIce.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindIce.rst
rename to share/cmake-3.6/Help/module/FindIce.rst
diff --git a/share/cmake-3.2/Help/module/FindIcotool.rst b/share/cmake-3.6/Help/module/FindIcotool.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindIcotool.rst
rename to share/cmake-3.6/Help/module/FindIcotool.rst
diff --git a/share/cmake-3.2/Help/module/FindImageMagick.rst b/share/cmake-3.6/Help/module/FindImageMagick.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindImageMagick.rst
rename to share/cmake-3.6/Help/module/FindImageMagick.rst
diff --git a/share/cmake-3.2/Help/module/FindIntl.rst b/share/cmake-3.6/Help/module/FindIntl.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindIntl.rst
rename to share/cmake-3.6/Help/module/FindIntl.rst
diff --git a/share/cmake-3.2/Help/module/FindJNI.rst b/share/cmake-3.6/Help/module/FindJNI.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindJNI.rst
rename to share/cmake-3.6/Help/module/FindJNI.rst
diff --git a/share/cmake-3.2/Help/module/FindJPEG.rst b/share/cmake-3.6/Help/module/FindJPEG.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindJPEG.rst
rename to share/cmake-3.6/Help/module/FindJPEG.rst
diff --git a/share/cmake-3.2/Help/module/FindJasper.rst b/share/cmake-3.6/Help/module/FindJasper.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindJasper.rst
rename to share/cmake-3.6/Help/module/FindJasper.rst
diff --git a/share/cmake-3.2/Help/module/FindJava.rst b/share/cmake-3.6/Help/module/FindJava.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindJava.rst
rename to share/cmake-3.6/Help/module/FindJava.rst
diff --git a/share/cmake-3.2/Help/module/FindKDE3.rst b/share/cmake-3.6/Help/module/FindKDE3.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindKDE3.rst
rename to share/cmake-3.6/Help/module/FindKDE3.rst
diff --git a/share/cmake-3.2/Help/module/FindKDE4.rst b/share/cmake-3.6/Help/module/FindKDE4.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindKDE4.rst
rename to share/cmake-3.6/Help/module/FindKDE4.rst
diff --git a/share/cmake-3.2/Help/module/FindLAPACK.rst b/share/cmake-3.6/Help/module/FindLAPACK.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLAPACK.rst
rename to share/cmake-3.6/Help/module/FindLAPACK.rst
diff --git a/share/cmake-3.2/Help/module/FindLATEX.rst b/share/cmake-3.6/Help/module/FindLATEX.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLATEX.rst
rename to share/cmake-3.6/Help/module/FindLATEX.rst
diff --git a/share/cmake-3.6/Help/module/FindLTTngUST.rst b/share/cmake-3.6/Help/module/FindLTTngUST.rst
new file mode 100644
index 0000000..a775462
--- /dev/null
+++ b/share/cmake-3.6/Help/module/FindLTTngUST.rst
@@ -0,0 +1 @@
+.. cmake-module:: ../../Modules/FindLTTngUST.cmake
diff --git a/share/cmake-3.2/Help/module/FindLibArchive.rst b/share/cmake-3.6/Help/module/FindLibArchive.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLibArchive.rst
rename to share/cmake-3.6/Help/module/FindLibArchive.rst
diff --git a/share/cmake-3.2/Help/module/FindLibLZMA.rst b/share/cmake-3.6/Help/module/FindLibLZMA.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLibLZMA.rst
rename to share/cmake-3.6/Help/module/FindLibLZMA.rst
diff --git a/share/cmake-3.2/Help/module/FindLibXml2.rst b/share/cmake-3.6/Help/module/FindLibXml2.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLibXml2.rst
rename to share/cmake-3.6/Help/module/FindLibXml2.rst
diff --git a/share/cmake-3.2/Help/module/FindLibXslt.rst b/share/cmake-3.6/Help/module/FindLibXslt.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLibXslt.rst
rename to share/cmake-3.6/Help/module/FindLibXslt.rst
diff --git a/share/cmake-3.2/Help/module/FindLua.rst b/share/cmake-3.6/Help/module/FindLua.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLua.rst
rename to share/cmake-3.6/Help/module/FindLua.rst
diff --git a/share/cmake-3.2/Help/module/FindLua50.rst b/share/cmake-3.6/Help/module/FindLua50.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLua50.rst
rename to share/cmake-3.6/Help/module/FindLua50.rst
diff --git a/share/cmake-3.2/Help/module/FindLua51.rst b/share/cmake-3.6/Help/module/FindLua51.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindLua51.rst
rename to share/cmake-3.6/Help/module/FindLua51.rst
diff --git a/share/cmake-3.2/Help/module/FindMFC.rst b/share/cmake-3.6/Help/module/FindMFC.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindMFC.rst
rename to share/cmake-3.6/Help/module/FindMFC.rst
diff --git a/share/cmake-3.2/Help/module/FindMPEG.rst b/share/cmake-3.6/Help/module/FindMPEG.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindMPEG.rst
rename to share/cmake-3.6/Help/module/FindMPEG.rst
diff --git a/share/cmake-3.2/Help/module/FindMPEG2.rst b/share/cmake-3.6/Help/module/FindMPEG2.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindMPEG2.rst
rename to share/cmake-3.6/Help/module/FindMPEG2.rst
diff --git a/share/cmake-3.2/Help/module/FindMPI.rst b/share/cmake-3.6/Help/module/FindMPI.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindMPI.rst
rename to share/cmake-3.6/Help/module/FindMPI.rst
diff --git a/share/cmake-3.2/Help/module/FindMatlab.rst b/share/cmake-3.6/Help/module/FindMatlab.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindMatlab.rst
rename to share/cmake-3.6/Help/module/FindMatlab.rst
diff --git a/share/cmake-3.2/Help/module/FindMotif.rst b/share/cmake-3.6/Help/module/FindMotif.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindMotif.rst
rename to share/cmake-3.6/Help/module/FindMotif.rst
diff --git a/share/cmake-3.2/Help/module/FindOpenAL.rst b/share/cmake-3.6/Help/module/FindOpenAL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindOpenAL.rst
rename to share/cmake-3.6/Help/module/FindOpenAL.rst
diff --git a/share/cmake-3.2/Help/module/FindOpenCL.rst b/share/cmake-3.6/Help/module/FindOpenCL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindOpenCL.rst
rename to share/cmake-3.6/Help/module/FindOpenCL.rst
diff --git a/share/cmake-3.2/Help/module/FindOpenGL.rst b/share/cmake-3.6/Help/module/FindOpenGL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindOpenGL.rst
rename to share/cmake-3.6/Help/module/FindOpenGL.rst
diff --git a/share/cmake-3.2/Help/module/FindOpenMP.rst b/share/cmake-3.6/Help/module/FindOpenMP.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindOpenMP.rst
rename to share/cmake-3.6/Help/module/FindOpenMP.rst
diff --git a/share/cmake-3.2/Help/module/FindOpenSSL.rst b/share/cmake-3.6/Help/module/FindOpenSSL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindOpenSSL.rst
rename to share/cmake-3.6/Help/module/FindOpenSSL.rst
diff --git a/share/cmake-3.2/Help/module/FindOpenSceneGraph.rst b/share/cmake-3.6/Help/module/FindOpenSceneGraph.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindOpenSceneGraph.rst
rename to share/cmake-3.6/Help/module/FindOpenSceneGraph.rst
diff --git a/share/cmake-3.2/Help/module/FindOpenThreads.rst b/share/cmake-3.6/Help/module/FindOpenThreads.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindOpenThreads.rst
rename to share/cmake-3.6/Help/module/FindOpenThreads.rst
diff --git a/share/cmake-3.2/Help/module/FindPHP4.rst b/share/cmake-3.6/Help/module/FindPHP4.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPHP4.rst
rename to share/cmake-3.6/Help/module/FindPHP4.rst
diff --git a/share/cmake-3.2/Help/module/FindPNG.rst b/share/cmake-3.6/Help/module/FindPNG.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPNG.rst
rename to share/cmake-3.6/Help/module/FindPNG.rst
diff --git a/share/cmake-3.2/Help/module/FindPackageHandleStandardArgs.rst b/share/cmake-3.6/Help/module/FindPackageHandleStandardArgs.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPackageHandleStandardArgs.rst
rename to share/cmake-3.6/Help/module/FindPackageHandleStandardArgs.rst
diff --git a/share/cmake-3.2/Help/module/FindPackageMessage.rst b/share/cmake-3.6/Help/module/FindPackageMessage.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPackageMessage.rst
rename to share/cmake-3.6/Help/module/FindPackageMessage.rst
diff --git a/share/cmake-3.2/Help/module/FindPerl.rst b/share/cmake-3.6/Help/module/FindPerl.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPerl.rst
rename to share/cmake-3.6/Help/module/FindPerl.rst
diff --git a/share/cmake-3.2/Help/module/FindPerlLibs.rst b/share/cmake-3.6/Help/module/FindPerlLibs.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPerlLibs.rst
rename to share/cmake-3.6/Help/module/FindPerlLibs.rst
diff --git a/share/cmake-3.2/Help/module/FindPhysFS.rst b/share/cmake-3.6/Help/module/FindPhysFS.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPhysFS.rst
rename to share/cmake-3.6/Help/module/FindPhysFS.rst
diff --git a/share/cmake-3.2/Help/module/FindPike.rst b/share/cmake-3.6/Help/module/FindPike.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPike.rst
rename to share/cmake-3.6/Help/module/FindPike.rst
diff --git a/share/cmake-3.2/Help/module/FindPkgConfig.rst b/share/cmake-3.6/Help/module/FindPkgConfig.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPkgConfig.rst
rename to share/cmake-3.6/Help/module/FindPkgConfig.rst
diff --git a/share/cmake-3.2/Help/module/FindPostgreSQL.rst b/share/cmake-3.6/Help/module/FindPostgreSQL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPostgreSQL.rst
rename to share/cmake-3.6/Help/module/FindPostgreSQL.rst
diff --git a/share/cmake-3.2/Help/module/FindProducer.rst b/share/cmake-3.6/Help/module/FindProducer.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindProducer.rst
rename to share/cmake-3.6/Help/module/FindProducer.rst
diff --git a/share/cmake-3.2/Help/module/FindProtobuf.rst b/share/cmake-3.6/Help/module/FindProtobuf.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindProtobuf.rst
rename to share/cmake-3.6/Help/module/FindProtobuf.rst
diff --git a/share/cmake-3.2/Help/module/FindPythonInterp.rst b/share/cmake-3.6/Help/module/FindPythonInterp.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPythonInterp.rst
rename to share/cmake-3.6/Help/module/FindPythonInterp.rst
diff --git a/share/cmake-3.2/Help/module/FindPythonLibs.rst b/share/cmake-3.6/Help/module/FindPythonLibs.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindPythonLibs.rst
rename to share/cmake-3.6/Help/module/FindPythonLibs.rst
diff --git a/share/cmake-3.2/Help/module/FindQt.rst b/share/cmake-3.6/Help/module/FindQt.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindQt.rst
rename to share/cmake-3.6/Help/module/FindQt.rst
diff --git a/share/cmake-3.2/Help/module/FindQt3.rst b/share/cmake-3.6/Help/module/FindQt3.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindQt3.rst
rename to share/cmake-3.6/Help/module/FindQt3.rst
diff --git a/share/cmake-3.2/Help/module/FindQt4.rst b/share/cmake-3.6/Help/module/FindQt4.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindQt4.rst
rename to share/cmake-3.6/Help/module/FindQt4.rst
diff --git a/share/cmake-3.2/Help/module/FindQuickTime.rst b/share/cmake-3.6/Help/module/FindQuickTime.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindQuickTime.rst
rename to share/cmake-3.6/Help/module/FindQuickTime.rst
diff --git a/share/cmake-3.2/Help/module/FindRTI.rst b/share/cmake-3.6/Help/module/FindRTI.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindRTI.rst
rename to share/cmake-3.6/Help/module/FindRTI.rst
diff --git a/share/cmake-3.2/Help/module/FindRuby.rst b/share/cmake-3.6/Help/module/FindRuby.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindRuby.rst
rename to share/cmake-3.6/Help/module/FindRuby.rst
diff --git a/share/cmake-3.2/Help/module/FindSDL.rst b/share/cmake-3.6/Help/module/FindSDL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSDL.rst
rename to share/cmake-3.6/Help/module/FindSDL.rst
diff --git a/share/cmake-3.2/Help/module/FindSDL_image.rst b/share/cmake-3.6/Help/module/FindSDL_image.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSDL_image.rst
rename to share/cmake-3.6/Help/module/FindSDL_image.rst
diff --git a/share/cmake-3.2/Help/module/FindSDL_mixer.rst b/share/cmake-3.6/Help/module/FindSDL_mixer.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSDL_mixer.rst
rename to share/cmake-3.6/Help/module/FindSDL_mixer.rst
diff --git a/share/cmake-3.2/Help/module/FindSDL_net.rst b/share/cmake-3.6/Help/module/FindSDL_net.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSDL_net.rst
rename to share/cmake-3.6/Help/module/FindSDL_net.rst
diff --git a/share/cmake-3.2/Help/module/FindSDL_sound.rst b/share/cmake-3.6/Help/module/FindSDL_sound.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSDL_sound.rst
rename to share/cmake-3.6/Help/module/FindSDL_sound.rst
diff --git a/share/cmake-3.2/Help/module/FindSDL_ttf.rst b/share/cmake-3.6/Help/module/FindSDL_ttf.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSDL_ttf.rst
rename to share/cmake-3.6/Help/module/FindSDL_ttf.rst
diff --git a/share/cmake-3.2/Help/module/FindSWIG.rst b/share/cmake-3.6/Help/module/FindSWIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSWIG.rst
rename to share/cmake-3.6/Help/module/FindSWIG.rst
diff --git a/share/cmake-3.2/Help/module/FindSelfPackers.rst b/share/cmake-3.6/Help/module/FindSelfPackers.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSelfPackers.rst
rename to share/cmake-3.6/Help/module/FindSelfPackers.rst
diff --git a/share/cmake-3.2/Help/module/FindSquish.rst b/share/cmake-3.6/Help/module/FindSquish.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSquish.rst
rename to share/cmake-3.6/Help/module/FindSquish.rst
diff --git a/share/cmake-3.2/Help/module/FindSubversion.rst b/share/cmake-3.6/Help/module/FindSubversion.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindSubversion.rst
rename to share/cmake-3.6/Help/module/FindSubversion.rst
diff --git a/share/cmake-3.2/Help/module/FindTCL.rst b/share/cmake-3.6/Help/module/FindTCL.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindTCL.rst
rename to share/cmake-3.6/Help/module/FindTCL.rst
diff --git a/share/cmake-3.2/Help/module/FindTIFF.rst b/share/cmake-3.6/Help/module/FindTIFF.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindTIFF.rst
rename to share/cmake-3.6/Help/module/FindTIFF.rst
diff --git a/share/cmake-3.2/Help/module/FindTclStub.rst b/share/cmake-3.6/Help/module/FindTclStub.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindTclStub.rst
rename to share/cmake-3.6/Help/module/FindTclStub.rst
diff --git a/share/cmake-3.2/Help/module/FindTclsh.rst b/share/cmake-3.6/Help/module/FindTclsh.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindTclsh.rst
rename to share/cmake-3.6/Help/module/FindTclsh.rst
diff --git a/share/cmake-3.2/Help/module/FindThreads.rst b/share/cmake-3.6/Help/module/FindThreads.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindThreads.rst
rename to share/cmake-3.6/Help/module/FindThreads.rst
diff --git a/share/cmake-3.2/Help/module/FindUnixCommands.rst b/share/cmake-3.6/Help/module/FindUnixCommands.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindUnixCommands.rst
rename to share/cmake-3.6/Help/module/FindUnixCommands.rst
diff --git a/share/cmake-3.2/Help/module/FindVTK.rst b/share/cmake-3.6/Help/module/FindVTK.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindVTK.rst
rename to share/cmake-3.6/Help/module/FindVTK.rst
diff --git a/share/cmake-3.2/Help/module/FindWget.rst b/share/cmake-3.6/Help/module/FindWget.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindWget.rst
rename to share/cmake-3.6/Help/module/FindWget.rst
diff --git a/share/cmake-3.2/Help/module/FindWish.rst b/share/cmake-3.6/Help/module/FindWish.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindWish.rst
rename to share/cmake-3.6/Help/module/FindWish.rst
diff --git a/share/cmake-3.2/Help/module/FindX11.rst b/share/cmake-3.6/Help/module/FindX11.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindX11.rst
rename to share/cmake-3.6/Help/module/FindX11.rst
diff --git a/share/cmake-3.6/Help/module/FindXCTest.rst b/share/cmake-3.6/Help/module/FindXCTest.rst
new file mode 100644
index 0000000..ff6273c
--- /dev/null
+++ b/share/cmake-3.6/Help/module/FindXCTest.rst
@@ -0,0 +1 @@
+.. cmake-module:: ../../Modules/FindXCTest.cmake
diff --git a/share/cmake-3.2/Help/module/FindXMLRPC.rst b/share/cmake-3.6/Help/module/FindXMLRPC.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindXMLRPC.rst
rename to share/cmake-3.6/Help/module/FindXMLRPC.rst
diff --git a/share/cmake-3.6/Help/module/FindXalanC.rst b/share/cmake-3.6/Help/module/FindXalanC.rst
new file mode 100644
index 0000000..b99d212
--- /dev/null
+++ b/share/cmake-3.6/Help/module/FindXalanC.rst
@@ -0,0 +1 @@
+.. cmake-module:: ../../Modules/FindXalanC.cmake
diff --git a/share/cmake-3.2/Help/module/FindXercesC.rst b/share/cmake-3.6/Help/module/FindXercesC.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindXercesC.rst
rename to share/cmake-3.6/Help/module/FindXercesC.rst
diff --git a/share/cmake-3.2/Help/module/FindZLIB.rst b/share/cmake-3.6/Help/module/FindZLIB.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindZLIB.rst
rename to share/cmake-3.6/Help/module/FindZLIB.rst
diff --git a/share/cmake-3.2/Help/module/Findosg.rst b/share/cmake-3.6/Help/module/Findosg.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/Findosg.rst
rename to share/cmake-3.6/Help/module/Findosg.rst
diff --git a/share/cmake-3.2/Help/module/FindosgAnimation.rst b/share/cmake-3.6/Help/module/FindosgAnimation.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgAnimation.rst
rename to share/cmake-3.6/Help/module/FindosgAnimation.rst
diff --git a/share/cmake-3.2/Help/module/FindosgDB.rst b/share/cmake-3.6/Help/module/FindosgDB.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgDB.rst
rename to share/cmake-3.6/Help/module/FindosgDB.rst
diff --git a/share/cmake-3.2/Help/module/FindosgFX.rst b/share/cmake-3.6/Help/module/FindosgFX.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgFX.rst
rename to share/cmake-3.6/Help/module/FindosgFX.rst
diff --git a/share/cmake-3.2/Help/module/FindosgGA.rst b/share/cmake-3.6/Help/module/FindosgGA.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgGA.rst
rename to share/cmake-3.6/Help/module/FindosgGA.rst
diff --git a/share/cmake-3.2/Help/module/FindosgIntrospection.rst b/share/cmake-3.6/Help/module/FindosgIntrospection.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgIntrospection.rst
rename to share/cmake-3.6/Help/module/FindosgIntrospection.rst
diff --git a/share/cmake-3.2/Help/module/FindosgManipulator.rst b/share/cmake-3.6/Help/module/FindosgManipulator.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgManipulator.rst
rename to share/cmake-3.6/Help/module/FindosgManipulator.rst
diff --git a/share/cmake-3.2/Help/module/FindosgParticle.rst b/share/cmake-3.6/Help/module/FindosgParticle.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgParticle.rst
rename to share/cmake-3.6/Help/module/FindosgParticle.rst
diff --git a/share/cmake-3.2/Help/module/FindosgPresentation.rst b/share/cmake-3.6/Help/module/FindosgPresentation.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgPresentation.rst
rename to share/cmake-3.6/Help/module/FindosgPresentation.rst
diff --git a/share/cmake-3.2/Help/module/FindosgProducer.rst b/share/cmake-3.6/Help/module/FindosgProducer.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgProducer.rst
rename to share/cmake-3.6/Help/module/FindosgProducer.rst
diff --git a/share/cmake-3.2/Help/module/FindosgQt.rst b/share/cmake-3.6/Help/module/FindosgQt.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgQt.rst
rename to share/cmake-3.6/Help/module/FindosgQt.rst
diff --git a/share/cmake-3.2/Help/module/FindosgShadow.rst b/share/cmake-3.6/Help/module/FindosgShadow.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgShadow.rst
rename to share/cmake-3.6/Help/module/FindosgShadow.rst
diff --git a/share/cmake-3.2/Help/module/FindosgSim.rst b/share/cmake-3.6/Help/module/FindosgSim.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgSim.rst
rename to share/cmake-3.6/Help/module/FindosgSim.rst
diff --git a/share/cmake-3.2/Help/module/FindosgTerrain.rst b/share/cmake-3.6/Help/module/FindosgTerrain.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgTerrain.rst
rename to share/cmake-3.6/Help/module/FindosgTerrain.rst
diff --git a/share/cmake-3.2/Help/module/FindosgText.rst b/share/cmake-3.6/Help/module/FindosgText.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgText.rst
rename to share/cmake-3.6/Help/module/FindosgText.rst
diff --git a/share/cmake-3.2/Help/module/FindosgUtil.rst b/share/cmake-3.6/Help/module/FindosgUtil.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgUtil.rst
rename to share/cmake-3.6/Help/module/FindosgUtil.rst
diff --git a/share/cmake-3.2/Help/module/FindosgViewer.rst b/share/cmake-3.6/Help/module/FindosgViewer.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgViewer.rst
rename to share/cmake-3.6/Help/module/FindosgViewer.rst
diff --git a/share/cmake-3.2/Help/module/FindosgVolume.rst b/share/cmake-3.6/Help/module/FindosgVolume.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgVolume.rst
rename to share/cmake-3.6/Help/module/FindosgVolume.rst
diff --git a/share/cmake-3.2/Help/module/FindosgWidget.rst b/share/cmake-3.6/Help/module/FindosgWidget.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindosgWidget.rst
rename to share/cmake-3.6/Help/module/FindosgWidget.rst
diff --git a/share/cmake-3.2/Help/module/Findosg_functions.rst b/share/cmake-3.6/Help/module/Findosg_functions.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/Findosg_functions.rst
rename to share/cmake-3.6/Help/module/Findosg_functions.rst
diff --git a/share/cmake-3.2/Help/module/FindwxWidgets.rst b/share/cmake-3.6/Help/module/FindwxWidgets.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindwxWidgets.rst
rename to share/cmake-3.6/Help/module/FindwxWidgets.rst
diff --git a/share/cmake-3.2/Help/module/FindwxWindows.rst b/share/cmake-3.6/Help/module/FindwxWindows.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FindwxWindows.rst
rename to share/cmake-3.6/Help/module/FindwxWindows.rst
diff --git a/share/cmake-3.2/Help/module/FortranCInterface.rst b/share/cmake-3.6/Help/module/FortranCInterface.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/FortranCInterface.rst
rename to share/cmake-3.6/Help/module/FortranCInterface.rst
diff --git a/share/cmake-3.2/Help/module/GNUInstallDirs.rst b/share/cmake-3.6/Help/module/GNUInstallDirs.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/GNUInstallDirs.rst
rename to share/cmake-3.6/Help/module/GNUInstallDirs.rst
diff --git a/share/cmake-3.2/Help/module/GenerateExportHeader.rst b/share/cmake-3.6/Help/module/GenerateExportHeader.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/GenerateExportHeader.rst
rename to share/cmake-3.6/Help/module/GenerateExportHeader.rst
diff --git a/share/cmake-3.2/Help/module/GetPrerequisites.rst b/share/cmake-3.6/Help/module/GetPrerequisites.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/GetPrerequisites.rst
rename to share/cmake-3.6/Help/module/GetPrerequisites.rst
diff --git a/share/cmake-3.2/Help/module/InstallRequiredSystemLibraries.rst b/share/cmake-3.6/Help/module/InstallRequiredSystemLibraries.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/InstallRequiredSystemLibraries.rst
rename to share/cmake-3.6/Help/module/InstallRequiredSystemLibraries.rst
diff --git a/share/cmake-3.2/Help/module/MacroAddFileDependencies.rst b/share/cmake-3.6/Help/module/MacroAddFileDependencies.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/MacroAddFileDependencies.rst
rename to share/cmake-3.6/Help/module/MacroAddFileDependencies.rst
diff --git a/share/cmake-3.2/Help/module/ProcessorCount.rst b/share/cmake-3.6/Help/module/ProcessorCount.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/ProcessorCount.rst
rename to share/cmake-3.6/Help/module/ProcessorCount.rst
diff --git a/share/cmake-3.2/Help/module/SelectLibraryConfigurations.rst b/share/cmake-3.6/Help/module/SelectLibraryConfigurations.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/SelectLibraryConfigurations.rst
rename to share/cmake-3.6/Help/module/SelectLibraryConfigurations.rst
diff --git a/share/cmake-3.2/Help/module/SquishTestScript.rst b/share/cmake-3.6/Help/module/SquishTestScript.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/SquishTestScript.rst
rename to share/cmake-3.6/Help/module/SquishTestScript.rst
diff --git a/share/cmake-3.2/Help/module/TestBigEndian.rst b/share/cmake-3.6/Help/module/TestBigEndian.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/TestBigEndian.rst
rename to share/cmake-3.6/Help/module/TestBigEndian.rst
diff --git a/share/cmake-3.2/Help/module/TestCXXAcceptsFlag.rst b/share/cmake-3.6/Help/module/TestCXXAcceptsFlag.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/TestCXXAcceptsFlag.rst
rename to share/cmake-3.6/Help/module/TestCXXAcceptsFlag.rst
diff --git a/share/cmake-3.2/Help/module/TestForANSIForScope.rst b/share/cmake-3.6/Help/module/TestForANSIForScope.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/TestForANSIForScope.rst
rename to share/cmake-3.6/Help/module/TestForANSIForScope.rst
diff --git a/share/cmake-3.2/Help/module/TestForANSIStreamHeaders.rst b/share/cmake-3.6/Help/module/TestForANSIStreamHeaders.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/TestForANSIStreamHeaders.rst
rename to share/cmake-3.6/Help/module/TestForANSIStreamHeaders.rst
diff --git a/share/cmake-3.2/Help/module/TestForSSTREAM.rst b/share/cmake-3.6/Help/module/TestForSSTREAM.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/TestForSSTREAM.rst
rename to share/cmake-3.6/Help/module/TestForSSTREAM.rst
diff --git a/share/cmake-3.2/Help/module/TestForSTDNamespace.rst b/share/cmake-3.6/Help/module/TestForSTDNamespace.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/TestForSTDNamespace.rst
rename to share/cmake-3.6/Help/module/TestForSTDNamespace.rst
diff --git a/share/cmake-3.2/Help/module/UseEcos.rst b/share/cmake-3.6/Help/module/UseEcos.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/UseEcos.rst
rename to share/cmake-3.6/Help/module/UseEcos.rst
diff --git a/share/cmake-3.2/Help/module/UseJava.rst b/share/cmake-3.6/Help/module/UseJava.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/UseJava.rst
rename to share/cmake-3.6/Help/module/UseJava.rst
diff --git a/share/cmake-3.2/Help/module/UseJavaClassFilelist.rst b/share/cmake-3.6/Help/module/UseJavaClassFilelist.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/UseJavaClassFilelist.rst
rename to share/cmake-3.6/Help/module/UseJavaClassFilelist.rst
diff --git a/share/cmake-3.2/Help/module/UseJavaSymlinks.rst b/share/cmake-3.6/Help/module/UseJavaSymlinks.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/UseJavaSymlinks.rst
rename to share/cmake-3.6/Help/module/UseJavaSymlinks.rst
diff --git a/share/cmake-3.2/Help/module/UsePkgConfig.rst b/share/cmake-3.6/Help/module/UsePkgConfig.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/UsePkgConfig.rst
rename to share/cmake-3.6/Help/module/UsePkgConfig.rst
diff --git a/share/cmake-3.2/Help/module/UseSWIG.rst b/share/cmake-3.6/Help/module/UseSWIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/UseSWIG.rst
rename to share/cmake-3.6/Help/module/UseSWIG.rst
diff --git a/share/cmake-3.2/Help/module/Use_wxWindows.rst b/share/cmake-3.6/Help/module/Use_wxWindows.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/Use_wxWindows.rst
rename to share/cmake-3.6/Help/module/Use_wxWindows.rst
diff --git a/share/cmake-3.2/Help/module/UsewxWidgets.rst b/share/cmake-3.6/Help/module/UsewxWidgets.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/UsewxWidgets.rst
rename to share/cmake-3.6/Help/module/UsewxWidgets.rst
diff --git a/share/cmake-3.2/Help/module/WriteBasicConfigVersionFile.rst b/share/cmake-3.6/Help/module/WriteBasicConfigVersionFile.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/WriteBasicConfigVersionFile.rst
rename to share/cmake-3.6/Help/module/WriteBasicConfigVersionFile.rst
diff --git a/share/cmake-3.2/Help/module/WriteCompilerDetectionHeader.rst b/share/cmake-3.6/Help/module/WriteCompilerDetectionHeader.rst
similarity index 100%
rename from share/cmake-3.2/Help/module/WriteCompilerDetectionHeader.rst
rename to share/cmake-3.6/Help/module/WriteCompilerDetectionHeader.rst
diff --git a/share/cmake-3.6/Help/policy/CMP0000.rst b/share/cmake-3.6/Help/policy/CMP0000.rst
new file mode 100644
index 0000000..97ea633
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0000.rst
@@ -0,0 +1,32 @@
+CMP0000
+-------
+
+A minimum required CMake version must be specified.
+
+CMake requires that projects specify the version of CMake to which
+they have been written.  This policy has been put in place so users
+trying to build the project may be told when they need to update their
+CMake.  Specifying a version also helps the project build with CMake
+versions newer than that specified.  Use the cmake_minimum_required
+command at the top of your main CMakeLists.txt file:
+
+::
+
+  cmake_minimum_required(VERSION <major>.<minor>)
+
+where "<major>.<minor>" is the version of CMake you want to support
+(such as "2.6").  The command will ensure that at least the given
+version of CMake is running and help newer versions be compatible with
+the project.  See documentation of cmake_minimum_required for details.
+
+Note that the command invocation must appear in the CMakeLists.txt
+file itself; a call in an included file is not sufficient.  However,
+the cmake_policy command may be called to set policy CMP0000 to OLD or
+NEW behavior explicitly.  The OLD behavior is to silently ignore the
+missing invocation.  The NEW behavior is to issue an error instead of
+a warning.  An included file may set CMP0000 explicitly to affect how
+this policy is enforced for the main CMakeLists.txt file.
+
+This policy was introduced in CMake version 2.6.0.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0001.rst b/share/cmake-3.6/Help/policy/CMP0001.rst
new file mode 100644
index 0000000..09ad387
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0001.rst
@@ -0,0 +1,21 @@
+CMP0001
+-------
+
+CMAKE_BACKWARDS_COMPATIBILITY should no longer be used.
+
+The OLD behavior is to check CMAKE_BACKWARDS_COMPATIBILITY and present
+it to the user.  The NEW behavior is to ignore
+CMAKE_BACKWARDS_COMPATIBILITY completely.
+
+In CMake 2.4 and below the variable CMAKE_BACKWARDS_COMPATIBILITY was
+used to request compatibility with earlier versions of CMake.  In
+CMake 2.6 and above all compatibility issues are handled by policies
+and the cmake_policy command.  However, CMake must still check
+CMAKE_BACKWARDS_COMPATIBILITY for projects written for CMake 2.4 and
+below.
+
+This policy was introduced in CMake version 2.6.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0002.rst b/share/cmake-3.6/Help/policy/CMP0002.rst
new file mode 100644
index 0000000..7cc53ef
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0002.rst
@@ -0,0 +1,28 @@
+CMP0002
+-------
+
+Logical target names must be globally unique.
+
+Targets names created with add_executable, add_library, or
+add_custom_target are logical build target names.  Logical target
+names must be globally unique because:
+
+::
+
+  - Unique names may be referenced unambiguously both in CMake
+    code and on make tool command lines.
+  - Logical names are used by Xcode and VS IDE generators
+    to produce meaningful project names for the targets.
+
+The logical name of executable and library targets does not have to
+correspond to the physical file names built.  Consider using the
+OUTPUT_NAME target property to create two targets with the same
+physical name while keeping logical names distinct.  Custom targets
+must simply have globally unique names (unless one uses the global
+property ALLOW_DUPLICATE_CUSTOM_TARGETS with a Makefiles generator).
+
+This policy was introduced in CMake version 2.6.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0003.rst b/share/cmake-3.6/Help/policy/CMP0003.rst
new file mode 100644
index 0000000..16b0451
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0003.rst
@@ -0,0 +1,104 @@
+CMP0003
+-------
+
+Libraries linked via full path no longer produce linker search paths.
+
+This policy affects how libraries whose full paths are NOT known are
+found at link time, but was created due to a change in how CMake deals
+with libraries whose full paths are known.  Consider the code
+
+::
+
+  target_link_libraries(myexe /path/to/libA.so)
+
+CMake 2.4 and below implemented linking to libraries whose full paths
+are known by splitting them on the link line into separate components
+consisting of the linker search path and the library name.  The
+example code might have produced something like
+
+::
+
+  ... -L/path/to -lA ...
+
+in order to link to library A.  An analysis was performed to order
+multiple link directories such that the linker would find library A in
+the desired location, but there are cases in which this does not work.
+CMake versions 2.6 and above use the more reliable approach of passing
+the full path to libraries directly to the linker in most cases.  The
+example code now produces something like
+
+::
+
+  ... /path/to/libA.so ....
+
+Unfortunately this change can break code like
+
+::
+
+  target_link_libraries(myexe /path/to/libA.so B)
+
+where "B" is meant to find "/path/to/libB.so".  This code is wrong
+because the user is asking the linker to find library B but has not
+provided a linker search path (which may be added with the
+link_directories command).  However, with the old linking
+implementation the code would work accidentally because the linker
+search path added for library A allowed library B to be found.
+
+In order to support projects depending on linker search paths added by
+linking to libraries with known full paths, the OLD behavior for this
+policy will add the linker search paths even though they are not
+needed for their own libraries.  When this policy is set to OLD, CMake
+will produce a link line such as
+
+::
+
+  ... -L/path/to /path/to/libA.so -lB ...
+
+which will allow library B to be found as it was previously.  When
+this policy is set to NEW, CMake will produce a link line such as
+
+::
+
+  ... /path/to/libA.so -lB ...
+
+which more accurately matches what the project specified.
+
+The setting for this policy used when generating the link line is that
+in effect when the target is created by an add_executable or
+add_library command.  For the example described above, the code
+
+::
+
+  cmake_policy(SET CMP0003 OLD) # or cmake_policy(VERSION 2.4)
+  add_executable(myexe myexe.c)
+  target_link_libraries(myexe /path/to/libA.so B)
+
+will work and suppress the warning for this policy.  It may also be
+updated to work with the corrected linking approach:
+
+::
+
+  cmake_policy(SET CMP0003 NEW) # or cmake_policy(VERSION 2.6)
+  link_directories(/path/to) # needed to find library B
+  add_executable(myexe myexe.c)
+  target_link_libraries(myexe /path/to/libA.so B)
+
+Even better, library B may be specified with a full path:
+
+::
+
+  add_executable(myexe myexe.c)
+  target_link_libraries(myexe /path/to/libA.so /path/to/libB.so)
+
+When all items on the link line have known paths CMake does not check
+this policy so it has no effect.
+
+Note that the warning for this policy will be issued for at most one
+target.  This avoids flooding users with messages for every target
+when setting the policy once will probably fix all targets.
+
+This policy was introduced in CMake version 2.6.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0004.rst b/share/cmake-3.6/Help/policy/CMP0004.rst
new file mode 100644
index 0000000..55da4d2
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0004.rst
@@ -0,0 +1,25 @@
+CMP0004
+-------
+
+Libraries linked may not have leading or trailing whitespace.
+
+CMake versions 2.4 and below silently removed leading and trailing
+whitespace from libraries linked with code like
+
+::
+
+  target_link_libraries(myexe " A ")
+
+This could lead to subtle errors in user projects.
+
+The OLD behavior for this policy is to silently remove leading and
+trailing whitespace.  The NEW behavior for this policy is to diagnose
+the existence of such whitespace as an error.  The setting for this
+policy used when checking the library names is that in effect when the
+target is created by an add_executable or add_library command.
+
+This policy was introduced in CMake version 2.6.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0005.rst b/share/cmake-3.6/Help/policy/CMP0005.rst
new file mode 100644
index 0000000..66d125f
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0005.rst
@@ -0,0 +1,26 @@
+CMP0005
+-------
+
+Preprocessor definition values are now escaped automatically.
+
+This policy determines whether or not CMake should generate escaped
+preprocessor definition values added via add_definitions.  CMake
+versions 2.4 and below assumed that only trivial values would be given
+for macros in add_definitions calls.  It did not attempt to escape
+non-trivial values such as string literals in generated build rules.
+CMake versions 2.6 and above support escaping of most values, but
+cannot assume the user has not added escapes already in an attempt to
+work around limitations in earlier versions.
+
+The OLD behavior for this policy is to place definition values given
+to add_definitions directly in the generated build rules without
+attempting to escape anything.  The NEW behavior for this policy is to
+generate correct escapes for all native build tools automatically.
+See documentation of the COMPILE_DEFINITIONS target property for
+limitations of the escaping implementation.
+
+This policy was introduced in CMake version 2.6.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0006.rst b/share/cmake-3.6/Help/policy/CMP0006.rst
new file mode 100644
index 0000000..d1b9ece
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0006.rst
@@ -0,0 +1,24 @@
+CMP0006
+-------
+
+Installing MACOSX_BUNDLE targets requires a BUNDLE DESTINATION.
+
+This policy determines whether the install(TARGETS) command must be
+given a BUNDLE DESTINATION when asked to install a target with the
+MACOSX_BUNDLE property set.  CMake 2.4 and below did not distinguish
+application bundles from normal executables when installing targets.
+CMake 2.6 provides a BUNDLE option to the install(TARGETS) command
+that specifies rules specific to application bundles on the Mac.
+Projects should use this option when installing a target with the
+MACOSX_BUNDLE property set.
+
+The OLD behavior for this policy is to fall back to the RUNTIME
+DESTINATION if a BUNDLE DESTINATION is not given.  The NEW behavior
+for this policy is to produce an error if a bundle target is installed
+without a BUNDLE DESTINATION.
+
+This policy was introduced in CMake version 2.6.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0007.rst b/share/cmake-3.6/Help/policy/CMP0007.rst
new file mode 100644
index 0000000..3927645
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0007.rst
@@ -0,0 +1,17 @@
+CMP0007
+-------
+
+list command no longer ignores empty elements.
+
+This policy determines whether the list command will ignore empty
+elements in the list.  CMake 2.4 and below list commands ignored all
+empty elements in the list.  For example, a;b;;c would have length 3
+and not 4.  The OLD behavior for this policy is to ignore empty list
+elements.  The NEW behavior for this policy is to correctly count
+empty elements in a list.
+
+This policy was introduced in CMake version 2.6.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0008.rst b/share/cmake-3.6/Help/policy/CMP0008.rst
new file mode 100644
index 0000000..f1e2ddd
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0008.rst
@@ -0,0 +1,34 @@
+CMP0008
+-------
+
+Libraries linked by full-path must have a valid library file name.
+
+In CMake 2.4 and below it is possible to write code like
+
+::
+
+  target_link_libraries(myexe /full/path/to/somelib)
+
+where "somelib" is supposed to be a valid library file name such as
+"libsomelib.a" or "somelib.lib".  For Makefile generators this
+produces an error at build time because the dependency on the full
+path cannot be found.  For VS IDE and Xcode generators this used to
+work by accident because CMake would always split off the library
+directory and ask the linker to search for the library by name
+(-lsomelib or somelib.lib).  Despite the failure with Makefiles, some
+projects have code like this and build only with VS and/or Xcode.
+This version of CMake prefers to pass the full path directly to the
+native build tool, which will fail in this case because it does not
+name a valid library file.
+
+This policy determines what to do with full paths that do not appear
+to name a valid library file.  The OLD behavior for this policy is to
+split the library name from the path and ask the linker to search for
+it.  The NEW behavior for this policy is to trust the given path and
+pass it directly to the native build tool unchanged.
+
+This policy was introduced in CMake version 2.6.1.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0009.rst b/share/cmake-3.6/Help/policy/CMP0009.rst
new file mode 100644
index 0000000..44baeb4
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0009.rst
@@ -0,0 +1,21 @@
+CMP0009
+-------
+
+FILE GLOB_RECURSE calls should not follow symlinks by default.
+
+In CMake 2.6.1 and below, FILE GLOB_RECURSE calls would follow through
+symlinks, sometimes coming up with unexpectedly large result sets
+because of symlinks to top level directories that contain hundreds of
+thousands of files.
+
+This policy determines whether or not to follow symlinks encountered
+during a FILE GLOB_RECURSE call.  The OLD behavior for this policy is
+to follow the symlinks.  The NEW behavior for this policy is not to
+follow the symlinks by default, but only if FOLLOW_SYMLINKS is given
+as an additional argument to the FILE command.
+
+This policy was introduced in CMake version 2.6.2.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0010.rst b/share/cmake-3.6/Help/policy/CMP0010.rst
new file mode 100644
index 0000000..344d704
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0010.rst
@@ -0,0 +1,20 @@
+CMP0010
+-------
+
+Bad variable reference syntax is an error.
+
+In CMake 2.6.2 and below, incorrect variable reference syntax such as
+a missing close-brace ("${FOO") was reported but did not stop
+processing of CMake code.  This policy determines whether a bad
+variable reference is an error.  The OLD behavior for this policy is
+to warn about the error, leave the string untouched, and continue.
+The NEW behavior for this policy is to report an error.
+
+If :policy:`CMP0053` is set to ``NEW``, this policy has no effect
+and is treated as always being ``NEW``.
+
+This policy was introduced in CMake version 2.6.3.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0011.rst b/share/cmake-3.6/Help/policy/CMP0011.rst
new file mode 100644
index 0000000..d281e0e
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0011.rst
@@ -0,0 +1,24 @@
+CMP0011
+-------
+
+Included scripts do automatic cmake_policy PUSH and POP.
+
+In CMake 2.6.2 and below, CMake Policy settings in scripts loaded by
+the include() and find_package() commands would affect the includer.
+Explicit invocations of cmake_policy(PUSH) and cmake_policy(POP) were
+required to isolate policy changes and protect the includer.  While
+some scripts intend to affect the policies of their includer, most do
+not.  In CMake 2.6.3 and above, include() and find_package() by
+default PUSH and POP an entry on the policy stack around an included
+script, but provide a NO_POLICY_SCOPE option to disable it.  This
+policy determines whether or not to imply NO_POLICY_SCOPE for
+compatibility.  The OLD behavior for this policy is to imply
+NO_POLICY_SCOPE for include() and find_package() commands.  The NEW
+behavior for this policy is to allow the commands to do their default
+cmake_policy PUSH and POP.
+
+This policy was introduced in CMake version 2.6.3.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0012.rst b/share/cmake-3.6/Help/policy/CMP0012.rst
new file mode 100644
index 0000000..85d64f4
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0012.rst
@@ -0,0 +1,27 @@
+CMP0012
+-------
+
+if() recognizes numbers and boolean constants.
+
+In CMake versions 2.6.4 and lower the if() command implicitly
+dereferenced arguments corresponding to variables, even those named
+like numbers or boolean constants, except for 0 and 1.  Numbers and
+boolean constants such as true, false, yes, no, on, off, y, n,
+notfound, ignore (all case insensitive) were recognized in some cases
+but not all.  For example, the code "if(TRUE)" might have evaluated as
+false.  Numbers such as 2 were recognized only in boolean expressions
+like "if(NOT 2)" (leading to false) but not as a single-argument like
+"if(2)" (also leading to false).  Later versions of CMake prefer to
+treat numbers and boolean constants literally, so they should not be
+used as variable names.
+
+The OLD behavior for this policy is to implicitly dereference
+variables named like numbers and boolean constants.  The NEW behavior
+for this policy is to recognize numbers and boolean constants without
+dereferencing variables with such names.
+
+This policy was introduced in CMake version 2.8.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0013.rst b/share/cmake-3.6/Help/policy/CMP0013.rst
new file mode 100644
index 0000000..2fabb89
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0013.rst
@@ -0,0 +1,21 @@
+CMP0013
+-------
+
+Duplicate binary directories are not allowed.
+
+CMake 2.6.3 and below silently permitted add_subdirectory() calls to
+create the same binary directory multiple times.  During build system
+generation files would be written and then overwritten in the build
+tree and could lead to strange behavior.  CMake 2.6.4 and above
+explicitly detect duplicate binary directories.  CMake 2.6.4 always
+considers this case an error.  In CMake 2.8.0 and above this policy
+determines whether or not the case is an error.  The OLD behavior for
+this policy is to allow duplicate binary directories.  The NEW
+behavior for this policy is to disallow duplicate binary directories
+with an error.
+
+This policy was introduced in CMake version 2.8.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0014.rst b/share/cmake-3.6/Help/policy/CMP0014.rst
new file mode 100644
index 0000000..f1f7b77
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0014.rst
@@ -0,0 +1,17 @@
+CMP0014
+-------
+
+Input directories must have CMakeLists.txt.
+
+CMake versions before 2.8 silently ignored missing CMakeLists.txt
+files in directories referenced by add_subdirectory() or subdirs(),
+treating them as if present but empty.  In CMake 2.8.0 and above this
+policy determines whether or not the case is an error.  The OLD
+behavior for this policy is to silently ignore the problem.  The NEW
+behavior for this policy is to report an error.
+
+This policy was introduced in CMake version 2.8.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0015.rst b/share/cmake-3.6/Help/policy/CMP0015.rst
new file mode 100644
index 0000000..9a48e3d
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0015.rst
@@ -0,0 +1,19 @@
+CMP0015
+-------
+
+link_directories() treats paths relative to the source dir.
+
+In CMake 2.8.0 and lower the link_directories() command passed
+relative paths unchanged to the linker.  In CMake 2.8.1 and above the
+link_directories() command prefers to interpret relative paths with
+respect to CMAKE_CURRENT_SOURCE_DIR, which is consistent with
+include_directories() and other commands.  The OLD behavior for this
+policy is to use relative paths verbatim in the linker command.  The
+NEW behavior for this policy is to convert relative paths to absolute
+paths by appending the relative path to CMAKE_CURRENT_SOURCE_DIR.
+
+This policy was introduced in CMake version 2.8.1.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0016.rst b/share/cmake-3.6/Help/policy/CMP0016.rst
new file mode 100644
index 0000000..cc898c8
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0016.rst
@@ -0,0 +1,15 @@
+CMP0016
+-------
+
+target_link_libraries() reports error if its only argument is not a target.
+
+In CMake 2.8.2 and lower the target_link_libraries() command silently
+ignored if it was called with only one argument, and this argument
+wasn't a valid target.  In CMake 2.8.3 and above it reports an error
+in this case.
+
+This policy was introduced in CMake version 2.8.3.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0017.rst b/share/cmake-3.6/Help/policy/CMP0017.rst
new file mode 100644
index 0000000..9f0f038
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0017.rst
@@ -0,0 +1,21 @@
+CMP0017
+-------
+
+Prefer files from the CMake module directory when including from there.
+
+Starting with CMake 2.8.4, if a cmake-module shipped with CMake (i.e.
+located in the CMake module directory) calls include() or
+find_package(), the files located in the CMake module directory are
+preferred over the files in CMAKE_MODULE_PATH.  This makes sure that
+the modules belonging to CMake always get those files included which
+they expect, and against which they were developed and tested.  In all
+other cases, the files found in CMAKE_MODULE_PATH still take
+precedence over the ones in the CMake module directory.  The OLD
+behavior is to always prefer files from CMAKE_MODULE_PATH over files
+from the CMake modules directory.
+
+This policy was introduced in CMake version 2.8.4.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0018.rst b/share/cmake-3.6/Help/policy/CMP0018.rst
new file mode 100644
index 0000000..a3a7a12
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0018.rst
@@ -0,0 +1,34 @@
+CMP0018
+-------
+
+Ignore CMAKE_SHARED_LIBRARY_<Lang>_FLAGS variable.
+
+CMake 2.8.8 and lower compiled sources in SHARED and MODULE libraries
+using the value of the undocumented CMAKE_SHARED_LIBRARY_<Lang>_FLAGS
+platform variable.  The variable contained platform-specific flags
+needed to compile objects for shared libraries.  Typically it included
+a flag such as -fPIC for position independent code but also included
+other flags needed on certain platforms.  CMake 2.8.9 and higher
+prefer instead to use the POSITION_INDEPENDENT_CODE target property to
+determine what targets should be position independent, and new
+undocumented platform variables to select flags while ignoring
+CMAKE_SHARED_LIBRARY_<Lang>_FLAGS completely.
+
+The default for either approach produces identical compilation flags,
+but if a project modifies CMAKE_SHARED_LIBRARY_<Lang>_FLAGS from its
+original value this policy determines which approach to use.
+
+The OLD behavior for this policy is to ignore the
+POSITION_INDEPENDENT_CODE property for all targets and use the
+modified value of CMAKE_SHARED_LIBRARY_<Lang>_FLAGS for SHARED and
+MODULE libraries.
+
+The NEW behavior for this policy is to ignore
+CMAKE_SHARED_LIBRARY_<Lang>_FLAGS whether it is modified or not and
+honor the POSITION_INDEPENDENT_CODE target property.
+
+This policy was introduced in CMake version 2.8.9.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0019.rst b/share/cmake-3.6/Help/policy/CMP0019.rst
new file mode 100644
index 0000000..2e3557d
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0019.rst
@@ -0,0 +1,22 @@
+CMP0019
+-------
+
+Do not re-expand variables in include and link information.
+
+CMake 2.8.10 and lower re-evaluated values given to the
+include_directories, link_directories, and link_libraries commands to
+expand any leftover variable references at the end of the
+configuration step.  This was for strict compatibility with VERY early
+CMake versions because all variable references are now normally
+evaluated during CMake language processing.  CMake 2.8.11 and higher
+prefer to skip the extra evaluation.
+
+The OLD behavior for this policy is to re-evaluate the values for
+strict compatibility.  The NEW behavior for this policy is to leave
+the values untouched.
+
+This policy was introduced in CMake version 2.8.11.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0020.rst b/share/cmake-3.6/Help/policy/CMP0020.rst
new file mode 100644
index 0000000..75ca9de
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0020.rst
@@ -0,0 +1,27 @@
+CMP0020
+-------
+
+Automatically link Qt executables to qtmain target on Windows.
+
+CMake 2.8.10 and lower required users of Qt to always specify a link
+dependency to the qtmain.lib static library manually on Windows.
+CMake 2.8.11 gained the ability to evaluate generator expressions
+while determining the link dependencies from IMPORTED targets.  This
+allows CMake itself to automatically link executables which link to Qt
+to the qtmain.lib library when using IMPORTED Qt targets.  For
+applications already linking to qtmain.lib, this should have little
+impact.  For applications which supply their own alternative WinMain
+implementation and for applications which use the QAxServer library,
+this automatic linking will need to be disabled as per the
+documentation.
+
+The OLD behavior for this policy is not to link executables to
+qtmain.lib automatically when they link to the QtCore IMPORTED target.
+The NEW behavior for this policy is to link executables to qtmain.lib
+automatically when they link to QtCore IMPORTED target.
+
+This policy was introduced in CMake version 2.8.11.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0021.rst b/share/cmake-3.6/Help/policy/CMP0021.rst
new file mode 100644
index 0000000..3a792ca
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0021.rst
@@ -0,0 +1,20 @@
+CMP0021
+-------
+
+Fatal error on relative paths in INCLUDE_DIRECTORIES target property.
+
+CMake 2.8.10.2 and lower allowed the INCLUDE_DIRECTORIES target
+property to contain relative paths.  The base path for such relative
+entries is not well defined.  CMake 2.8.12 issues a FATAL_ERROR if the
+INCLUDE_DIRECTORIES property contains a relative path.
+
+The OLD behavior for this policy is not to warn about relative paths
+in the INCLUDE_DIRECTORIES target property.  The NEW behavior for this
+policy is to issue a FATAL_ERROR if INCLUDE_DIRECTORIES contains a
+relative path.
+
+This policy was introduced in CMake version 2.8.12.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0022.rst b/share/cmake-3.6/Help/policy/CMP0022.rst
new file mode 100644
index 0000000..579d09a
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0022.rst
@@ -0,0 +1,39 @@
+CMP0022
+-------
+
+INTERFACE_LINK_LIBRARIES defines the link interface.
+
+CMake 2.8.11 constructed the 'link interface' of a target from
+properties matching ``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?``.
+The modern way to specify config-sensitive content is to use generator
+expressions and the ``IMPORTED_`` prefix makes uniform processing of the
+link interface with generator expressions impossible.  The
+INTERFACE_LINK_LIBRARIES target property was introduced as a
+replacement in CMake 2.8.12.  This new property is named consistently
+with the INTERFACE_COMPILE_DEFINITIONS, INTERFACE_INCLUDE_DIRECTORIES
+and INTERFACE_COMPILE_OPTIONS properties.  For in-build targets, CMake
+will use the INTERFACE_LINK_LIBRARIES property as the source of the
+link interface only if policy CMP0022 is NEW.  When exporting a target
+which has this policy set to NEW, only the INTERFACE_LINK_LIBRARIES
+property will be processed and generated for the IMPORTED target by
+default.  A new option to the install(EXPORT) and export commands
+allows export of the old-style properties for compatibility with
+downstream users of CMake versions older than 2.8.12.  The
+target_link_libraries command will no longer populate the properties
+matching LINK_INTERFACE_LIBRARIES(_<CONFIG>)? if this policy is NEW.
+
+Warning-free future-compatible code which works with CMake 2.8.7 onwards
+can be written by using the ``LINK_PRIVATE`` and ``LINK_PUBLIC`` keywords
+of :command:`target_link_libraries`.
+
+The OLD behavior for this policy is to ignore the
+INTERFACE_LINK_LIBRARIES property for in-build targets.  The NEW
+behavior for this policy is to use the INTERFACE_LINK_LIBRARIES
+property for in-build targets, and ignore the old properties matching
+``(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_<CONFIG>)?``.
+
+This policy was introduced in CMake version 2.8.12.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0023.rst b/share/cmake-3.6/Help/policy/CMP0023.rst
new file mode 100644
index 0000000..76a4900
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0023.rst
@@ -0,0 +1,35 @@
+CMP0023
+-------
+
+Plain and keyword target_link_libraries signatures cannot be mixed.
+
+CMake 2.8.12 introduced the target_link_libraries signature using the
+PUBLIC, PRIVATE, and INTERFACE keywords to generalize the LINK_PUBLIC
+and LINK_PRIVATE keywords introduced in CMake 2.8.7.  Use of
+signatures with any of these keywords sets the link interface of a
+target explicitly, even if empty.  This produces confusing behavior
+when used in combination with the historical behavior of the plain
+target_link_libraries signature.  For example, consider the code:
+
+::
+
+ target_link_libraries(mylib A)
+ target_link_libraries(mylib PRIVATE B)
+
+After the first line the link interface has not been set explicitly so
+CMake would use the link implementation, A, as the link interface.
+However, the second line sets the link interface to empty.  In order
+to avoid this subtle behavior CMake now prefers to disallow mixing the
+plain and keyword signatures of target_link_libraries for a single
+target.
+
+The OLD behavior for this policy is to allow keyword and plain
+target_link_libraries signatures to be mixed.  The NEW behavior for
+this policy is to not to allow mixing of the keyword and plain
+signatures.
+
+This policy was introduced in CMake version 2.8.12.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0024.rst b/share/cmake-3.6/Help/policy/CMP0024.rst
new file mode 100644
index 0000000..272a56c
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0024.rst
@@ -0,0 +1,24 @@
+CMP0024
+-------
+
+Disallow include export result.
+
+CMake 2.8.12 and lower allowed use of the include() command with the
+result of the export() command.  This relies on the assumption that
+the export() command has an immediate effect at configure-time during
+a cmake run.  Certain properties of targets are not fully determined
+until later at generate-time, such as the link language and complete
+list of link libraries.  Future refactoring will change the effect of
+the export() command to be executed at generate-time.  Use ALIAS
+targets instead in cases where the goal is to refer to targets by
+another name.
+
+The OLD behavior for this policy is to allow including the result of
+an export() command.  The NEW behavior for this policy is not to
+allow including the result of an export() command.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0025.rst b/share/cmake-3.6/Help/policy/CMP0025.rst
new file mode 100644
index 0000000..62dd509
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0025.rst
@@ -0,0 +1,29 @@
+CMP0025
+-------
+
+Compiler id for Apple Clang is now ``AppleClang``.
+
+CMake 3.0 and above recognize that Apple Clang is a different compiler
+than upstream Clang and that they have different version numbers.
+CMake now prefers to present this to projects by setting the
+:variable:`CMAKE_<LANG>_COMPILER_ID` variable to ``AppleClang`` instead
+of ``Clang``.  However, existing projects may assume the compiler id for
+Apple Clang is just ``Clang`` as it was in CMake versions prior to 3.0.
+Therefore this policy determines for Apple Clang which compiler id to
+report in the :variable:`CMAKE_<LANG>_COMPILER_ID` variable after
+language ``<LANG>`` is enabled by the :command:`project` or
+:command:`enable_language` command.  The policy must be set prior
+to the invocation of either command.
+
+The OLD behavior for this policy is to use compiler id ``Clang``.  The
+NEW behavior for this policy is to use compiler id ``AppleClang``.
+
+This policy was introduced in CMake version 3.0.  Use the
+:command:`cmake_policy` command to set this policy to OLD or NEW explicitly.
+Unlike most policies, CMake version |release| does *not* warn
+by default when this policy is not set and simply uses OLD behavior.
+See documentation of the
+:variable:`CMAKE_POLICY_WARNING_CMP0025 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
+variable to control the warning.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0026.rst b/share/cmake-3.6/Help/policy/CMP0026.rst
new file mode 100644
index 0000000..3fe1374
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0026.rst
@@ -0,0 +1,28 @@
+CMP0026
+-------
+
+Disallow use of the LOCATION property for build targets.
+
+CMake 2.8.12 and lower allowed reading the LOCATION target
+property (and configuration-specific variants) to
+determine the eventual location of build targets.  This relies on the
+assumption that all necessary information is available at
+configure-time to determine the final location and filename of the
+target.  However, this property is not fully determined until later at
+generate-time.  At generate time, the $<TARGET_FILE> generator
+expression can be used to determine the eventual LOCATION of a target
+output.
+
+Code which reads the LOCATION target property can be ported to use the
+$<TARGET_FILE> generator expression together with the file(GENERATE)
+subcommand to generate a file containing the target location.
+
+The OLD behavior for this policy is to allow reading the LOCATION
+properties from build-targets.  The NEW behavior for this policy is to
+not to allow reading the LOCATION properties from build-targets.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0027.rst b/share/cmake-3.6/Help/policy/CMP0027.rst
new file mode 100644
index 0000000..28913ce
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0027.rst
@@ -0,0 +1,27 @@
+CMP0027
+-------
+
+Conditionally linked imported targets with missing include directories.
+
+CMake 2.8.11 introduced introduced the concept of
+INTERFACE_INCLUDE_DIRECTORIES, and a check at cmake time that the
+entries in the INTERFACE_INCLUDE_DIRECTORIES of an IMPORTED target
+actually exist.  CMake 2.8.11 also introduced generator expression
+support in the target_link_libraries command.  However, if an imported
+target is linked as a result of a generator expression evaluation, the
+entries in the INTERFACE_INCLUDE_DIRECTORIES of that target were not
+checked for existence as they should be.
+
+The OLD behavior of this policy is to report a warning if an entry in
+the INTERFACE_INCLUDE_DIRECTORIES of a generator-expression
+conditionally linked IMPORTED target does not exist.
+
+The NEW behavior of this policy is to report an error if an entry in
+the INTERFACE_INCLUDE_DIRECTORIES of a generator-expression
+conditionally linked IMPORTED target does not exist.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0028.rst b/share/cmake-3.6/Help/policy/CMP0028.rst
new file mode 100644
index 0000000..be57125
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0028.rst
@@ -0,0 +1,25 @@
+CMP0028
+-------
+
+Double colon in target name means ALIAS or IMPORTED target.
+
+CMake 2.8.12 and lower allowed the use of targets and files with double
+colons in target_link_libraries, with some buildsystem generators.
+
+The use of double-colons is a common pattern used to namespace IMPORTED
+targets and ALIAS targets.  When computing the link dependencies of a target,
+the name of each dependency could either be a target, or a file on disk.
+Previously, if a target was not found with a matching name, the name was
+considered to refer to a file on disk.  This can lead to confusing error
+messages if there is a typo in what should be a target name.
+
+The OLD behavior for this policy is to search for targets, then files on disk,
+even if the search term contains double-colons.  The NEW behavior for this
+policy is to issue a FATAL_ERROR if a link dependency contains
+double-colons but is not an IMPORTED target or an ALIAS target.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0029.rst b/share/cmake-3.6/Help/policy/CMP0029.rst
new file mode 100644
index 0000000..aa10b97
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0029.rst
@@ -0,0 +1,12 @@
+CMP0029
+-------
+
+The :command:`subdir_depends` command should not be called.
+
+The implementation of this command has been empty since December 2001
+but was kept in CMake for compatibility for a long time.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0030.rst b/share/cmake-3.6/Help/policy/CMP0030.rst
new file mode 100644
index 0000000..81bbb84
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0030.rst
@@ -0,0 +1,13 @@
+CMP0030
+-------
+
+The :command:`use_mangled_mesa` command should not be called.
+
+This command was created in September 2001 to support VTK before
+modern CMake language and custom command capabilities.  VTK has
+not used it in years.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0031.rst b/share/cmake-3.6/Help/policy/CMP0031.rst
new file mode 100644
index 0000000..8c3eef6
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0031.rst
@@ -0,0 +1,15 @@
+CMP0031
+-------
+
+The :command:`load_command` command should not be called.
+
+This command was added in August 2002 to allow projects to add
+arbitrary commands implemented in C or C++.  However, it does
+not work when the toolchain in use does not match the ABI of
+the CMake process.  It has been mostly superseded by the
+:command:`macro` and :command:`function` commands.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0032.rst b/share/cmake-3.6/Help/policy/CMP0032.rst
new file mode 100644
index 0000000..5c1fa4b
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0032.rst
@@ -0,0 +1,15 @@
+CMP0032
+-------
+
+The :command:`output_required_files` command should not be called.
+
+This command was added in June 2001 to expose the then-current CMake
+implicit dependency scanner.  CMake's real implicit dependency scanner
+has evolved since then but is not exposed through this command.  The
+scanning capabilities of this command are very limited and this
+functionality is better achieved through dedicated outside tools.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0033.rst b/share/cmake-3.6/Help/policy/CMP0033.rst
new file mode 100644
index 0000000..4a6cc59
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0033.rst
@@ -0,0 +1,16 @@
+CMP0033
+-------
+
+The :command:`export_library_dependencies` command should not be called.
+
+This command was added in January 2003 to export ``<tgt>_LIB_DEPENDS``
+internal CMake cache entries to a file for installation with a project.
+This was used at the time to allow transitive link dependencies to
+work for applications outside of the original build tree of a project.
+The functionality has been superseded by the :command:`export` and
+:command:`install(EXPORT)` commands.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0034.rst b/share/cmake-3.6/Help/policy/CMP0034.rst
new file mode 100644
index 0000000..0f3934a
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0034.rst
@@ -0,0 +1,13 @@
+CMP0034
+-------
+
+The :command:`utility_source` command should not be called.
+
+This command was introduced in March 2001 to help build executables used to
+generate other files.  This approach has long been replaced by
+:command:`add_executable` combined with :command:`add_custom_command`.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0035.rst b/share/cmake-3.6/Help/policy/CMP0035.rst
new file mode 100644
index 0000000..58199a4
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0035.rst
@@ -0,0 +1,12 @@
+CMP0035
+-------
+
+The :command:`variable_requires` command should not be called.
+
+This command was introduced in November 2001 to perform some conditional
+logic.  It has long been replaced by the :command:`if` command.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0036.rst b/share/cmake-3.6/Help/policy/CMP0036.rst
new file mode 100644
index 0000000..4bcfc54
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0036.rst
@@ -0,0 +1,14 @@
+CMP0036
+-------
+
+The :command:`build_name` command should not be called.
+
+This command was added in May 2001 to compute a name for the current
+operating system and compiler combination.  The command has long been
+documented as discouraged and replaced by the :variable:`CMAKE_SYSTEM`
+and :variable:`CMAKE_<LANG>_COMPILER` variables.
+
+.. |disallowed_version| replace:: 3.0
+.. include:: DISALLOWED_COMMAND.txt
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0037.rst b/share/cmake-3.6/Help/policy/CMP0037.rst
new file mode 100644
index 0000000..9f8457c
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0037.rst
@@ -0,0 +1,28 @@
+CMP0037
+-------
+
+Target names should not be reserved and should match a validity pattern.
+
+CMake 2.8.12 and lower allowed creating targets using :command:`add_library`,
+:command:`add_executable` and :command:`add_custom_target` with unrestricted
+choice for the target name.  Newer cmake features such
+as :manual:`cmake-generator-expressions(7)` and some
+diagnostics expect target names to match a restricted pattern.
+
+Target names may contain upper and lower case letters, numbers, the underscore
+character (_), dot(.), plus(+) and minus(-).  As a special case, ALIAS
+targets and IMPORTED targets may contain two consequtive colons.
+
+Target names reserved by one or more CMake generators are not allowed.
+Among others these include "all", "help" and "test".
+
+The OLD behavior for this policy is to allow creating targets with
+reserved names or which do not match the validity pattern.
+The NEW behavior for this policy is to report an error
+if an add_* command is used with an invalid target name.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0038.rst b/share/cmake-3.6/Help/policy/CMP0038.rst
new file mode 100644
index 0000000..a306d90
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0038.rst
@@ -0,0 +1,18 @@
+CMP0038
+-------
+
+Targets may not link directly to themselves.
+
+CMake 2.8.12 and lower allowed a build target to link to itself directly with
+a :command:`target_link_libraries` call. This is an indicator of a bug in
+user code.
+
+The OLD behavior for this policy is to ignore targets which list themselves
+in their own link implementation.  The NEW behavior for this policy is to
+report an error if a target attempts to link to itself.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0039.rst b/share/cmake-3.6/Help/policy/CMP0039.rst
new file mode 100644
index 0000000..97d78ae
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0039.rst
@@ -0,0 +1,19 @@
+CMP0039
+-------
+
+Utility targets may not have link dependencies.
+
+CMake 2.8.12 and lower allowed using utility targets in the left hand side
+position of the :command:`target_link_libraries` command. This is an indicator
+of a bug in user code.
+
+The OLD behavior for this policy is to ignore attempts to set the link
+libraries of utility targets.  The NEW behavior for this policy is to
+report an error if an attempt is made to set the link libraries of a
+utility target.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0040.rst b/share/cmake-3.6/Help/policy/CMP0040.rst
new file mode 100644
index 0000000..d46baf6
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0040.rst
@@ -0,0 +1,21 @@
+CMP0040
+-------
+
+The target in the ``TARGET`` signature of :command:`add_custom_command`
+must exist and must be defined in current directory.
+
+CMake 2.8.12 and lower silently ignored a custom command created with
+the ``TARGET`` signature of :command:`add_custom_command`
+if the target is unknown or was defined outside the current directory.
+
+The ``OLD`` behavior for this policy is to ignore custom commands
+for unknown targets.  The ``NEW`` behavior for this policy is to report
+an error if the target referenced in :command:`add_custom_command` is
+unknown or was defined outside the current directory.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses ``OLD`` behavior.
+Use the :command:`cmake_policy` command to set it to ``OLD`` or
+``NEW`` explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0041.rst b/share/cmake-3.6/Help/policy/CMP0041.rst
new file mode 100644
index 0000000..f027d5d
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0041.rst
@@ -0,0 +1,27 @@
+CMP0041
+-------
+
+Error on relative include with generator expression.
+
+Diagnostics in CMake 2.8.12 and lower silently ignored an entry in the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of a target if it contained a generator
+expression at any position.
+
+The path entries in that target property should not be relative. High-level
+API should ensure that by adding either a source directory or a install
+directory prefix, as appropriate.
+
+As an additional diagnostic, the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` generated
+on an :prop_tgt:`IMPORTED` target for the install location should not contain
+paths in the source directory or the build directory.
+
+The OLD behavior for this policy is to ignore relative path entries if they
+contain a generator expression. The NEW behavior for this policy is to report
+an error if a generator expression appears in another location and the path is
+relative.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0042.rst b/share/cmake-3.6/Help/policy/CMP0042.rst
new file mode 100644
index 0000000..31314b2
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0042.rst
@@ -0,0 +1,21 @@
+CMP0042
+-------
+
+:prop_tgt:`MACOSX_RPATH` is enabled by default.
+
+CMake 2.8.12 and newer has support for using ``@rpath`` in a target's install
+name.  This was enabled by setting the target property
+:prop_tgt:`MACOSX_RPATH`.  The ``@rpath`` in an install name is a more
+flexible and powerful mechanism than ``@executable_path`` or ``@loader_path``
+for locating shared libraries.
+
+CMake 3.0 and later prefer this property to be ON by default.  Projects
+wanting ``@rpath`` in a target's install name may remove any setting of
+the :prop_tgt:`INSTALL_NAME_DIR` and :variable:`CMAKE_INSTALL_NAME_DIR`
+variables.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0043.rst b/share/cmake-3.6/Help/policy/CMP0043.rst
new file mode 100644
index 0000000..9e427c3
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0043.rst
@@ -0,0 +1,47 @@
+CMP0043
+-------
+
+Ignore COMPILE_DEFINITIONS_<Config> properties
+
+CMake 2.8.12 and lower allowed setting the
+:prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` target property and
+:prop_dir:`COMPILE_DEFINITIONS_<CONFIG>` directory property to apply
+configuration-specific compile definitions.
+
+Since CMake 2.8.10, the :prop_tgt:`COMPILE_DEFINITIONS` property has supported
+:manual:`generator expressions <cmake-generator-expressions(7)>` for setting
+configuration-dependent content.  The continued existence of the suffixed
+variables is redundant, and causes a maintenance burden.  Population of the
+:prop_tgt:`COMPILE_DEFINITIONS_DEBUG <COMPILE_DEFINITIONS_<CONFIG>>` property
+may be replaced with a population of :prop_tgt:`COMPILE_DEFINITIONS` directly
+or via :command:`target_compile_definitions`:
+
+.. code-block:: cmake
+
+  # Old Interfaces:
+  set_property(TARGET tgt APPEND PROPERTY
+    COMPILE_DEFINITIONS_DEBUG DEBUG_MODE
+  )
+  set_property(DIRECTORY APPEND PROPERTY
+    COMPILE_DEFINITIONS_DEBUG DIR_DEBUG_MODE
+  )
+
+  # New Interfaces:
+  set_property(TARGET tgt APPEND PROPERTY
+    COMPILE_DEFINITIONS $<$<CONFIG:Debug>:DEBUG_MODE>
+  )
+  target_compile_definitions(tgt PRIVATE $<$<CONFIG:Debug>:DEBUG_MODE>)
+  set_property(DIRECTORY APPEND PROPERTY
+    COMPILE_DEFINITIONS $<$<CONFIG:Debug>:DIR_DEBUG_MODE>
+  )
+
+The OLD behavior for this policy is to consume the content of the suffixed
+:prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` target property when generating the
+compilation command. The NEW behavior for this policy is to ignore the content
+of the :prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` target property .
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0044.rst b/share/cmake-3.6/Help/policy/CMP0044.rst
new file mode 100644
index 0000000..02afa9f
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0044.rst
@@ -0,0 +1,21 @@
+CMP0044
+-------
+
+Case sensitive ``<LANG>_COMPILER_ID`` generator expressions
+
+CMake 2.8.12 introduced the ``<LANG>_COMPILER_ID``
+:manual:`generator expressions <cmake-generator-expressions(7)>` to allow
+comparison of the :variable:`CMAKE_<LANG>_COMPILER_ID` with a test value.  The
+possible valid values are lowercase, but the comparison with the test value
+was performed case-insensitively.
+
+The OLD behavior for this policy is to perform a case-insensitive comparison
+with the value in the ``<LANG>_COMPILER_ID`` expression. The NEW behavior
+for this policy is to perform a case-sensitive comparison with the value in
+the ``<LANG>_COMPILER_ID`` expression.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0045.rst b/share/cmake-3.6/Help/policy/CMP0045.rst
new file mode 100644
index 0000000..c7e1a90
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0045.rst
@@ -0,0 +1,19 @@
+CMP0045
+-------
+
+Error on non-existent target in get_target_property.
+
+In CMake 2.8.12 and lower, the :command:`get_target_property` command accepted
+a non-existent target argument without issuing any error or warning.  The
+result variable is set to a ``-NOTFOUND`` value.
+
+The OLD behavior for this policy is to issue no warning and set the result
+variable to a ``-NOTFOUND`` value.  The NEW behavior
+for this policy is to issue a ``FATAL_ERROR`` if the command is called with a
+non-existent target.
+
+This policy was introduced in CMake version 3.0.  CMake version
+|release| warns when the policy is not set and uses OLD behavior.  Use
+the cmake_policy command to set it to OLD or NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0046.rst b/share/cmake-3.6/Help/policy/CMP0046.rst
new file mode 100644
index 0000000..576d1b1
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0046.rst
@@ -0,0 +1,19 @@
+CMP0046
+-------
+
+Error on non-existent dependency in add_dependencies.
+
+CMake 2.8.12 and lower silently ignored non-existent dependencies
+listed in the :command:`add_dependencies` command.
+
+The OLD behavior for this policy is to silently ignore non-existent
+dependencies. The NEW behavior for this policy is to report an error
+if non-existent dependencies are listed in the :command:`add_dependencies`
+command.
+
+This policy was introduced in CMake version 3.0.
+CMake version |release| warns when the policy is not set and uses
+OLD behavior.  Use the cmake_policy command to set it to OLD or
+NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0047.rst b/share/cmake-3.6/Help/policy/CMP0047.rst
new file mode 100644
index 0000000..882dd78
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0047.rst
@@ -0,0 +1,30 @@
+CMP0047
+-------
+
+Use ``QCC`` compiler id for the qcc drivers on QNX.
+
+CMake 3.0 and above recognize that the QNX qcc compiler driver is
+different from the GNU compiler.
+CMake now prefers to present this to projects by setting the
+:variable:`CMAKE_<LANG>_COMPILER_ID` variable to ``QCC`` instead
+of ``GNU``.  However, existing projects may assume the compiler id for
+QNX qcc is just ``GNU`` as it was in CMake versions prior to 3.0.
+Therefore this policy determines for QNX qcc which compiler id to
+report in the :variable:`CMAKE_<LANG>_COMPILER_ID` variable after
+language ``<LANG>`` is enabled by the :command:`project` or
+:command:`enable_language` command.  The policy must be set prior
+to the invocation of either command.
+
+The OLD behavior for this policy is to use the ``GNU`` compiler id
+for the qcc and QCC compiler drivers. The NEW behavior for this policy
+is to use the ``QCC`` compiler id for those drivers.
+
+This policy was introduced in CMake version 3.0.  Use the
+:command:`cmake_policy` command to set this policy to OLD or NEW explicitly.
+Unlike most policies, CMake version |release| does *not* warn
+by default when this policy is not set and simply uses OLD behavior.
+See documentation of the
+:variable:`CMAKE_POLICY_WARNING_CMP0047 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
+variable to control the warning.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0048.rst b/share/cmake-3.6/Help/policy/CMP0048.rst
new file mode 100644
index 0000000..0e7e606
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0048.rst
@@ -0,0 +1,24 @@
+CMP0048
+-------
+
+The :command:`project` command manages VERSION variables.
+
+CMake version 3.0 introduced the ``VERSION`` option of the :command:`project`
+command to specify a project version as well as the name.  In order to keep
+:variable:`PROJECT_VERSION` and related variables consistent with variable
+:variable:`PROJECT_NAME` it is necessary to set the VERSION variables
+to the empty string when no ``VERSION`` is given to :command:`project`.
+However, this can change behavior for existing projects that set VERSION
+variables themselves since :command:`project` may now clear them.
+This policy controls the behavior for compatibility with such projects.
+
+The OLD behavior for this policy is to leave VERSION variables untouched.
+The NEW behavior for this policy is to set VERSION as documented by the
+:command:`project` command.
+
+This policy was introduced in CMake version 3.0.
+CMake version |release| warns when the policy is not set and uses
+OLD behavior.  Use the cmake_policy command to set it to OLD or
+NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0049.rst b/share/cmake-3.6/Help/policy/CMP0049.rst
new file mode 100644
index 0000000..a3ce4b1
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0049.rst
@@ -0,0 +1,25 @@
+CMP0049
+-------
+
+Do not expand variables in target source entries.
+
+CMake 2.8.12 and lower performed and extra layer of variable expansion
+when evaluating source file names:
+
+.. code-block:: cmake
+
+  set(a_source foo.c)
+  add_executable(foo \${a_source})
+
+This was undocumented behavior.
+
+The OLD behavior for this policy is to expand such variables when processing
+the target sources.  The NEW behavior for this policy is to issue an error
+if such variables need to be expanded.
+
+This policy was introduced in CMake version 3.0.
+CMake version |release| warns when the policy is not set and uses
+OLD behavior.  Use the cmake_policy command to set it to OLD or
+NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0050.rst b/share/cmake-3.6/Help/policy/CMP0050.rst
new file mode 100644
index 0000000..39e40b6
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0050.rst
@@ -0,0 +1,20 @@
+CMP0050
+-------
+
+Disallow add_custom_command SOURCE signatures.
+
+CMake 2.8.12 and lower allowed a signature for :command:`add_custom_command`
+which specified an input to a command.  This was undocumented behavior.
+Modern use of CMake associates custom commands with their output, rather
+than their input.
+
+The OLD behavior for this policy is to allow the use of
+:command:`add_custom_command` SOURCE signatures.  The NEW behavior for this
+policy is to issue an error if such a signature is used.
+
+This policy was introduced in CMake version 3.0.
+CMake version |release| warns when the policy is not set and uses
+OLD behavior.  Use the cmake_policy command to set it to OLD or
+NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0051.rst b/share/cmake-3.6/Help/policy/CMP0051.rst
new file mode 100644
index 0000000..6b679e5
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0051.rst
@@ -0,0 +1,26 @@
+CMP0051
+-------
+
+List TARGET_OBJECTS in SOURCES target property.
+
+CMake 3.0 and lower did not include the ``TARGET_OBJECTS``
+:manual:`generator expression <cmake-generator-expressions(7)>` when
+returning the :prop_tgt:`SOURCES` target property.
+
+Configure-time CMake code is not able to handle generator expressions.  If
+using the :prop_tgt:`SOURCES` target property at configure time, it may be
+necessary to first remove generator expressions using the
+:command:`string(GENEX_STRIP)` command.  Generate-time CMake code such as
+:command:`file(GENERATE)` can handle the content without stripping.
+
+The ``OLD`` behavior for this policy is to omit ``TARGET_OBJECTS``
+expressions from the :prop_tgt:`SOURCES` target property.  The ``NEW``
+behavior for this policy is to include ``TARGET_OBJECTS`` expressions
+in the output.
+
+This policy was introduced in CMake version 3.1.
+CMake version |release| warns when the policy is not set and uses
+``OLD`` behavior.  Use the :command:`cmake_policy` command to set it
+to ``OLD`` or ``NEW`` explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0052.rst b/share/cmake-3.6/Help/policy/CMP0052.rst
new file mode 100644
index 0000000..0ea5ace
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0052.rst
@@ -0,0 +1,26 @@
+CMP0052
+-------
+
+Reject source and build dirs in installed INTERFACE_INCLUDE_DIRECTORIES.
+
+CMake 3.0 and lower allowed subdirectories of the source directory or build
+directory to be in the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` of
+installed and exported targets, if the directory was also a subdirectory of
+the installation prefix.  This makes the installation depend on the
+existence of the source dir or binary dir, and the installation will be
+broken if either are removed after installation.
+
+See :ref:`Include Directories and Usage Requirements` for more on
+specifying include directories for targets.
+
+The OLD behavior for this policy is to export the content of the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` with the source or binary
+directory.  The NEW behavior for this
+policy is to issue an error if such a directory is used.
+
+This policy was introduced in CMake version 3.1.
+CMake version |release| warns when the policy is not set and uses
+``OLD`` behavior.  Use the :command:`cmake_policy` command to set it
+to ``OLD`` or ``NEW`` explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0053.rst b/share/cmake-3.6/Help/policy/CMP0053.rst
new file mode 100644
index 0000000..2620a60
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0053.rst
@@ -0,0 +1,46 @@
+CMP0053
+-------
+
+Simplify variable reference and escape sequence evaluation.
+
+CMake 3.1 introduced a much faster implementation of evaluation of the
+:ref:`Variable References` and :ref:`Escape Sequences` documented in the
+:manual:`cmake-language(7)` manual.  While the behavior is identical
+to the legacy implementation in most cases, some corner cases were
+cleaned up to simplify the behavior.  Specifically:
+
+* Expansion of ``@VAR@`` reference syntax defined by the
+  :command:`configure_file` and :command:`string(CONFIGURE)`
+  commands is no longer performed in other contexts.
+
+* Literal ``${VAR}`` reference syntax may contain only
+  alphanumeric characters (``A-Z``, ``a-z``, ``0-9``) and
+  the characters ``_``, ``.``, ``/``, ``-``, and ``+``.
+  Variables with other characters in their name may still
+  be referenced indirectly, e.g.
+
+  .. code-block:: cmake
+
+    set(varname "otherwise & disallowed $ characters")
+    message("${${varname}}")
+
+* The setting of policy :policy:`CMP0010` is not considered,
+  so improper variable reference syntax is always an error.
+
+* More characters are allowed to be escaped in variable names.
+  Previously, only ``()#" \@^`` were valid characters to
+  escape. Now any non-alphanumeric, non-semicolon, non-NUL
+  character may be escaped following the ``escape_identity``
+  production in the :ref:`Escape Sequences` section of the
+  :manual:`cmake-language(7)` manual.
+
+The ``OLD`` behavior for this policy is to honor the legacy behavior for
+variable references and escape sequences.  The ``NEW`` behavior is to
+use the simpler variable expansion and escape sequence evaluation rules.
+
+This policy was introduced in CMake version 3.1.
+CMake version |release| warns when the policy is not set and uses
+``OLD`` behavior.  Use the :command:`cmake_policy` command to set
+it to ``OLD`` or ``NEW`` explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0054.rst b/share/cmake-3.6/Help/policy/CMP0054.rst
new file mode 100644
index 0000000..1e000a6
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0054.rst
@@ -0,0 +1,52 @@
+CMP0054
+-------
+
+Only interpret :command:`if` arguments as variables or keywords when unquoted.
+
+CMake 3.1 and above no longer implicitly dereference variables or
+interpret keywords in an :command:`if` command argument when
+it is a :ref:`Quoted Argument` or a :ref:`Bracket Argument`.
+
+The ``OLD`` behavior for this policy is to dereference variables and
+interpret keywords even if they are quoted or bracketed.
+The ``NEW`` behavior is to not dereference variables or interpret keywords
+that have been quoted or bracketed.
+
+Given the following partial example:
+
+::
+
+  set(A E)
+  set(E "")
+
+  if("${A}" STREQUAL "")
+    message("Result is TRUE before CMake 3.1 or when CMP0054 is OLD")
+  else()
+    message("Result is FALSE in CMake 3.1 and above if CMP0054 is NEW")
+  endif()
+
+After explicit expansion of variables this gives:
+
+::
+
+  if("E" STREQUAL "")
+
+With the policy set to ``OLD`` implicit expansion reduces this semantically to:
+
+::
+
+  if("" STREQUAL "")
+
+With the policy set to ``NEW`` the quoted arguments will not be
+further dereferenced:
+
+::
+
+  if("E" STREQUAL "")
+
+This policy was introduced in CMake version 3.1.
+CMake version |release| warns when the policy is not set and uses
+``OLD`` behavior.  Use the :command:`cmake_policy` command to set
+it to ``OLD`` or ``NEW`` explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0055.rst b/share/cmake-3.6/Help/policy/CMP0055.rst
new file mode 100644
index 0000000..b3df758
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0055.rst
@@ -0,0 +1,19 @@
+CMP0055
+-------
+
+Strict checking for the :command:`break` command.
+
+CMake 3.1 and lower allowed calls to the :command:`break` command
+outside of a loop context and also ignored any given arguments.
+This was undefined behavior.
+
+The OLD behavior for this policy is to allow :command:`break` to be placed
+outside of loop contexts and ignores any arguments.  The NEW behavior for this
+policy is to issue an error if a misplaced break or any arguments are found.
+
+This policy was introduced in CMake version 3.2.
+CMake version |release| warns when the policy is not set and uses
+OLD behavior.  Use the cmake_policy command to set it to OLD or
+NEW explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0056.rst b/share/cmake-3.6/Help/policy/CMP0056.rst
new file mode 100644
index 0000000..3ba89d5
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0056.rst
@@ -0,0 +1,34 @@
+CMP0056
+-------
+
+Honor link flags in :command:`try_compile` source-file signature.
+
+The :command:`try_compile` command source-file signature generates a
+``CMakeLists.txt`` file to build the source file into an executable.
+In order to compile the source the same way as it might be compiled
+by the calling project, the generated project sets the value of the
+:variable:`CMAKE_<LANG>_FLAGS` variable to that in the calling project.
+The value of the :variable:`CMAKE_EXE_LINKER_FLAGS` variable may be
+needed in some cases too, but CMake 3.1 and lower did not set it in
+the generated project.  CMake 3.2 and above prefer to set it so that
+linker flags are honored as well as compiler flags.  This policy
+provides compatibility with the pre-3.2 behavior.
+
+The OLD behavior for this policy is to not set the value of the
+:variable:`CMAKE_EXE_LINKER_FLAGS` variable in the generated test
+project.  The NEW behavior for this policy is to set the value of
+the :variable:`CMAKE_EXE_LINKER_FLAGS` variable in the test project
+to the same as it is in the calling project.
+
+If the project code does not set the policy explicitly, users may
+set it on the command line by defining the
+:variable:`CMAKE_POLICY_DEFAULT_CMP0056 <CMAKE_POLICY_DEFAULT_CMP<NNNN>>`
+variable in the cache.
+
+This policy was introduced in CMake version 3.2.  Unlike most policies,
+CMake version |release| does *not* warn by default when this policy
+is not set and simply uses OLD behavior.  See documentation of the
+:variable:`CMAKE_POLICY_WARNING_CMP0056 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
+variable to control the warning.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0057.rst b/share/cmake-3.6/Help/policy/CMP0057.rst
new file mode 100644
index 0000000..83db186
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0057.rst
@@ -0,0 +1,16 @@
+CMP0057
+-------
+
+Support new :command:`if` IN_LIST operator.
+
+CMake 3.3 adds support for the new IN_LIST operator.
+
+The ``OLD`` behavior for this policy is to ignore the IN_LIST operator.
+The ``NEW`` behavior is to interpret the IN_LIST operator.
+
+This policy was introduced in CMake version 3.3.
+CMake version |release| warns when the policy is not set and uses
+``OLD`` behavior.  Use the :command:`cmake_policy` command to set
+it to ``OLD`` or ``NEW`` explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0058.rst b/share/cmake-3.6/Help/policy/CMP0058.rst
new file mode 100644
index 0000000..05efd48
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0058.rst
@@ -0,0 +1,110 @@
+CMP0058
+-------
+
+Ninja requires custom command byproducts to be explicit.
+
+When an intermediate file generated during the build is consumed
+by an expensive operation or a large tree of dependents, one may
+reduce the work needed for an incremental rebuild by updating the
+file timestamp only when its content changes.  With this approach
+the generation rule must have a separate output file that is always
+updated with a new timestamp that is newer than any dependencies of
+the rule so that the build tool re-runs the rule only when the input
+changes.  We refer to the separate output file as a rule's *witness*
+and the generated file as a rule's *byproduct*.
+
+Byproducts may not be listed as outputs because their timestamps are
+allowed to be older than the inputs.  No build tools (like ``make``)
+that existed when CMake was designed have a way to express byproducts.
+Therefore CMake versions prior to 3.2 had no way to specify them.
+Projects typically left byproducts undeclared in the rules that
+generate them.  For example:
+
+.. code-block:: cmake
+
+  add_custom_command(
+    OUTPUT witness.txt
+    COMMAND ${CMAKE_COMMAND} -E copy_if_different
+            ${CMAKE_CURRENT_SOURCE_DIR}/input.txt
+            byproduct.txt # timestamp may not change
+    COMMAND ${CMAKE_COMMAND} -E touch witness.txt
+    DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/input.txt
+    )
+  add_custom_target(Provider DEPENDS witness.txt)
+  add_custom_command(
+    OUTPUT generated.c
+    COMMAND expensive-task -i byproduct.txt -o generated.c
+    DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/byproduct.txt
+    )
+  add_library(Consumer generated.c)
+  add_dependencies(Consumer Provider)
+
+This works well for all generators except :generator:`Ninja`.
+The Ninja build tool sees a rule listing ``byproduct.txt``
+as a dependency and no rule listing it as an output.  Ninja then
+complains that there is no way to satisfy the dependency and
+stops building even though there are order-only dependencies
+that ensure ``byproduct.txt`` will exist before its consumers
+need it.  See discussion of this problem in `Ninja Issue 760`_
+for further details on why Ninja works this way.
+
+.. _`Ninja Issue 760`: https://github.com/martine/ninja/issues/760
+
+Instead of leaving byproducts undeclared in the rules that generate
+them, Ninja expects byproducts to be listed along with other outputs.
+Such rules may be marked with a ``restat`` option that tells Ninja
+to check the timestamps of outputs after the rules run.  This
+prevents byproducts whose timestamps do not change from causing
+their dependents to re-build unnecessarily.
+
+Since the above approach does not tell CMake what custom command
+generates ``byproduct.txt``, the Ninja generator does not have
+enough information to add the byproduct as an output of any rule.
+CMake 2.8.12 and above work around this problem and allow projects
+using the above approach to build by generating ``phony`` build
+rules to tell Ninja to tolerate such missing files.  However, this
+workaround prevents Ninja from diagnosing a dependency that is
+really missing.  It also works poorly in in-source builds where
+every custom command dependency, even on source files, needs to
+be treated this way because CMake does not have enough information
+to know which files are generated as byproducts of custom commands.
+
+CMake 3.2 introduced the ``BYPRODUCTS`` option to the
+:command:`add_custom_command` and :command:`add_custom_target`
+commands.  This option allows byproducts to be specified explicitly:
+
+.. code-block:: cmake
+
+  add_custom_command(
+    OUTPUT witness.txt
+    BYPRODUCTS byproduct.txt # explicit byproduct specification
+    COMMAND ${CMAKE_COMMAND} -E copy_if_different
+            ${CMAKE_CURRENT_SOURCE_DIR}/input.txt
+            byproduct.txt # timestamp may not change
+  ...
+
+The ``BYPRODUCTS`` option is used by the :generator:`Ninja` generator
+to list byproducts among the outputs of the custom commands that
+generate them, and is ignored by other generators.
+
+CMake 3.3 and above prefer to require projects to specify custom
+command byproducts explicitly so that it can avoid using the
+``phony`` rule workaround altogether.  Policy ``CMP0058`` was
+introduced to provide compatibility with existing projects that
+still need the workaround.
+
+This policy has no effect on generators other than :generator:`Ninja`.
+The ``OLD`` behavior for this policy is to generate Ninja ``phony``
+rules for unknown dependencies in the build tree.  The ``NEW``
+behavior for this policy is to not generate these and instead
+require projects to specify custom command ``BYPRODUCTS`` explicitly.
+
+This policy was introduced in CMake version 3.3.
+CMake version |release| warns when it sees unknown dependencies in
+out-of-source build trees if the policy is not set and then uses
+``OLD`` behavior.  Use the :command:`cmake_policy` command to set
+the policy to ``OLD`` or ``NEW`` explicitly.  The policy setting
+must be in scope at the end of the top-level ``CMakeLists.txt``
+file of the project and has global effect.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0059.rst b/share/cmake-3.6/Help/policy/CMP0059.rst
new file mode 100644
index 0000000..bce982e
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0059.rst
@@ -0,0 +1,19 @@
+CMP0059
+-------
+
+Do not treat ``DEFINITIONS`` as a built-in directory property.
+
+CMake 3.3 and above no longer make a list of definitions available through
+the :prop_dir:`DEFINITIONS` directory property.  The
+:prop_dir:`COMPILE_DEFINITIONS` directory property may be used instead.
+
+The ``OLD`` behavior for this policy is to provide the list of flags given
+so far to the :command:`add_definitions` command.  The ``NEW`` behavior is
+to behave as a normal user-defined directory property.
+
+This policy was introduced in CMake version 3.3.
+CMake version |release| warns when the policy is not set and uses
+``OLD`` behavior.  Use the :command:`cmake_policy` command to set
+it to ``OLD`` or ``NEW`` explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0060.rst b/share/cmake-3.6/Help/policy/CMP0060.rst
new file mode 100644
index 0000000..8611aff
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0060.rst
@@ -0,0 +1,65 @@
+CMP0060
+-------
+
+Link libraries by full path even in implicit directories.
+
+Policy :policy:`CMP0003` was introduced with the intention of always
+linking library files by full path when a full path is given to the
+:command:`target_link_libraries` command.  However, on some platforms
+(e.g. HP-UX) the compiler front-end adds alternative library search paths
+for the current architecture (e.g. ``/usr/lib/<arch>`` has alternatives
+to libraries in ``/usr/lib`` for the current architecture).
+On such platforms the :command:`find_library` may find a library such as
+``/usr/lib/libfoo.so`` that does not belong to the current architecture.
+
+Prior to policy :policy:`CMP0003` projects would still build in such
+cases because the incorrect library path would be converted to ``-lfoo``
+on the link line and the linker would find the proper library in the
+arch-specific search path provided by the compiler front-end implicitly.
+At the time we chose to remain compatible with such projects by always
+converting library files found in implicit link directories to ``-lfoo``
+flags to ask the linker to search for them.  This approach allowed existing
+projects to continue to build while still linking to libraries outside
+implicit link directories via full path (such as those in the build tree).
+
+CMake does allow projects to override this behavior by using an
+:ref:`IMPORTED library target <Imported Targets>` with its
+:prop_tgt:`IMPORTED_LOCATION` property set to the desired full path to
+a library file.  In fact, many :ref:`Find Modules` are learning to provide
+:ref:`Imported Targets` instead of just the traditional ``Foo_LIBRARIES``
+variable listing library files.  However, this makes the link line
+generated for a library found by a Find Module depend on whether it
+is linked through an imported target or not, which is inconsistent.
+Furthermore, this behavior has been a source of confusion because the
+generated link line for a library file depends on its location.  It is
+also problematic for projects trying to link statically because flags
+like ``-Wl,-Bstatic -lfoo -Wl,-Bdynamic`` may be used to help the linker
+select ``libfoo.a`` instead of ``libfoo.so`` but then leak dynamic linking
+to following libraries.  (See the :prop_tgt:`LINK_SEARCH_END_STATIC`
+target property for a solution typically used for that problem.)
+
+When the special case for libraries in implicit link directories was first
+introduced the list of implicit link directories was simply hard-coded
+(e.g. ``/lib``, ``/usr/lib``, and a few others).  Since that time, CMake
+has learned to detect the implicit link directories used by the compiler
+front-end.  If necessary, the :command:`find_library` command could be
+taught to use this information to help find libraries of the proper
+architecture.
+
+For these reasons, CMake 3.3 and above prefer to drop the special case
+and link libraries by full path even when they are in implicit link
+directories.  Policy ``CMP0060`` provides compatibility for existing
+projects.
+
+The OLD behavior for this policy is to ask the linker to search for
+libraries whose full paths are known to be in implicit link directories.
+The NEW behavior for this policy is to link libraries by full path even
+if they are in implicit link directories.
+
+This policy was introduced in CMake version 3.3.  Unlike most policies,
+CMake version |release| does *not* warn by default when this policy
+is not set and simply uses OLD behavior.  See documentation of the
+:variable:`CMAKE_POLICY_WARNING_CMP0060 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
+variable to control the warning.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0061.rst b/share/cmake-3.6/Help/policy/CMP0061.rst
new file mode 100644
index 0000000..cb2ac28
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0061.rst
@@ -0,0 +1,26 @@
+CMP0061
+-------
+
+CTest does not by default tell ``make`` to ignore errors (``-i``).
+
+The :command:`ctest_build` and :command:`build_command` commands no
+longer generate build commands for :ref:`Makefile Generators` with
+the ``-i`` option.  Previously this was done to help build as much
+of tested projects as possible.  However, this behavior is not
+consistent with other generators and also causes the return code
+of the ``make`` tool to be meaningless.
+
+Of course users may still add this option manually by setting
+:variable:`CTEST_BUILD_COMMAND` or the ``MAKECOMMAND`` cache entry.
+See the :ref:`CTest Build Step` ``MakeCommand`` setting documentation
+for their effects.
+
+The ``OLD`` behavior for this policy is to add ``-i`` to ``make``
+calls in CTest.  The ``NEW`` behavior for this policy is to not
+add ``-i``.
+
+This policy was introduced in CMake version 3.3.  Unlike most policies,
+CMake version |release| does *not* warn when this policy is not set and
+simply uses OLD behavior.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0062.rst b/share/cmake-3.6/Help/policy/CMP0062.rst
new file mode 100644
index 0000000..9047fff
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0062.rst
@@ -0,0 +1,29 @@
+CMP0062
+-------
+
+Disallow install() of export() result.
+
+The :command:`export()` command generates a file containing
+:ref:`Imported Targets`, which is suitable for use from the build
+directory.  It is not suitable for installation because it contains absolute
+paths to buildsystem locations, and is particular to a single build
+configuration.
+
+The :command:`install(EXPORT)` generates and installs files which contain
+:ref:`Imported Targets`.  These files are generated with relative paths
+(unless the user specifies absolute paths), and are designed for
+multi-configuration use.  See :ref:`Creating Packages` for more.
+
+CMake 3.3 no longer allows the use of the :command:`install(FILES)` command
+with the result of the :command:`export()` command.
+
+The ``OLD`` behavior for this policy is to allow installing the result of
+an :command:`export()` command.  The ``NEW`` behavior for this policy is
+not to allow installing the result of an :command:`export()` command.
+
+This policy was introduced in CMake version 3.3.  CMake version
+|release| warns when the policy is not set and uses ``OLD`` behavior.  Use
+the :command:`cmake_policy()` command to set it to ``OLD`` or ``NEW``
+explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0063.rst b/share/cmake-3.6/Help/policy/CMP0063.rst
new file mode 100644
index 0000000..d736d06
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0063.rst
@@ -0,0 +1,28 @@
+CMP0063
+-------
+
+Honor visibility properties for all target types.
+
+The :prop_tgt:`<LANG>_VISIBILITY_PRESET` and
+:prop_tgt:`VISIBILITY_INLINES_HIDDEN` target properties affect visibility
+of symbols during dynamic linking.  When first introduced these properties
+affected compilation of sources only in shared libraries, module libraries,
+and executables with the :prop_tgt:`ENABLE_EXPORTS` property set.  This
+was sufficient for the basic use cases of shared libraries and executables
+with plugins.  However, some sources may be compiled as part of static
+libraries or object libraries and then linked into a shared library later.
+CMake 3.3 and above prefer to honor these properties for sources compiled
+in all target types.  This policy preserves compatibility for projects
+expecting the properties to work only for some target types.
+
+The ``OLD`` behavior for this policy is to ignore the visibility properties
+for static libraries, object libraries, and executables without exports.
+The ``NEW`` behavior for this policy is to honor the visibility properties
+for all target types.
+
+This policy was introduced in CMake version 3.3.  CMake version
+|release| warns when the policy is not set and uses ``OLD`` behavior.  Use
+the :command:`cmake_policy()` command to set it to ``OLD`` or ``NEW``
+explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0064.rst b/share/cmake-3.6/Help/policy/CMP0064.rst
new file mode 100644
index 0000000..e9a061b
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0064.rst
@@ -0,0 +1,17 @@
+CMP0064
+-------
+
+Recognize ``TEST`` as a operator for the :command:`if` command.
+
+The ``TEST`` operator was added to the :command:`if` command to determine if a
+given test name was created by the :command:`add_test` command.
+
+The ``OLD`` behavior for this policy is to ignore the ``TEST`` operator.
+The ``NEW`` behavior is to interpret the ``TEST`` operator.
+
+This policy was introduced in CMake version 3.4.  CMake version
+|release| warns when the policy is not set and uses ``OLD`` behavior.  Use
+the :command:`cmake_policy()` command to set it to ``OLD`` or ``NEW``
+explicitly.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/CMP0065.rst b/share/cmake-3.6/Help/policy/CMP0065.rst
new file mode 100644
index 0000000..2ed775d
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/CMP0065.rst
@@ -0,0 +1,27 @@
+CMP0065
+-------
+
+Do not add flags to export symbols from executables without
+the :prop_tgt:`ENABLE_EXPORTS` target property.
+
+CMake 3.3 and below, for historical reasons, always linked executables
+on some platforms with flags like ``-rdynamic`` to export symbols from
+the executables for use by any plugins they may load via ``dlopen``.
+CMake 3.4 and above prefer to do this only for executables that are
+explicitly marked with the :prop_tgt:`ENABLE_EXPORTS` target property.
+
+The ``OLD`` behavior of this policy is to always use the additional link
+flags when linking executables regardless of the value of the
+:prop_tgt:`ENABLE_EXPORTS` target property.
+
+The ``NEW`` behavior of this policy is to only use the additional link
+flags when linking executables if the :prop_tgt:`ENABLE_EXPORTS` target
+property is set to ``True``.
+
+This policy was introduced in CMake version 3.4.  Unlike most policies,
+CMake version |release| does *not* warn by default when this policy
+is not set and simply uses OLD behavior.  See documentation of the
+:variable:`CMAKE_POLICY_WARNING_CMP0065 <CMAKE_POLICY_WARNING_CMP<NNNN>>`
+variable to control the warning.
+
+.. include:: DEPRECATED.txt
diff --git a/share/cmake-3.6/Help/policy/DEPRECATED.txt b/share/cmake-3.6/Help/policy/DEPRECATED.txt
new file mode 100644
index 0000000..f66de55
--- /dev/null
+++ b/share/cmake-3.6/Help/policy/DEPRECATED.txt
@@ -0,0 +1,4 @@
+.. note::
+  The ``OLD`` behavior of a policy is
+  :manual:`deprecated by definition <cmake-policies(7)>`
+  and may be removed in a future version of CMake.
diff --git a/share/cmake-3.2/Help/policy/DISALLOWED_COMMAND.txt b/share/cmake-3.6/Help/policy/DISALLOWED_COMMAND.txt
similarity index 100%
rename from share/cmake-3.2/Help/policy/DISALLOWED_COMMAND.txt
rename to share/cmake-3.6/Help/policy/DISALLOWED_COMMAND.txt
diff --git a/share/cmake-3.2/Help/prop_cache/ADVANCED.rst b/share/cmake-3.6/Help/prop_cache/ADVANCED.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_cache/ADVANCED.rst
rename to share/cmake-3.6/Help/prop_cache/ADVANCED.rst
diff --git a/share/cmake-3.2/Help/prop_cache/HELPSTRING.rst b/share/cmake-3.6/Help/prop_cache/HELPSTRING.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_cache/HELPSTRING.rst
rename to share/cmake-3.6/Help/prop_cache/HELPSTRING.rst
diff --git a/share/cmake-3.2/Help/prop_cache/MODIFIED.rst b/share/cmake-3.6/Help/prop_cache/MODIFIED.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_cache/MODIFIED.rst
rename to share/cmake-3.6/Help/prop_cache/MODIFIED.rst
diff --git a/share/cmake-3.2/Help/prop_cache/STRINGS.rst b/share/cmake-3.6/Help/prop_cache/STRINGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_cache/STRINGS.rst
rename to share/cmake-3.6/Help/prop_cache/STRINGS.rst
diff --git a/share/cmake-3.2/Help/prop_cache/TYPE.rst b/share/cmake-3.6/Help/prop_cache/TYPE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_cache/TYPE.rst
rename to share/cmake-3.6/Help/prop_cache/TYPE.rst
diff --git a/share/cmake-3.2/Help/prop_cache/VALUE.rst b/share/cmake-3.6/Help/prop_cache/VALUE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_cache/VALUE.rst
rename to share/cmake-3.6/Help/prop_cache/VALUE.rst
diff --git a/share/cmake-3.2/Help/prop_dir/ADDITIONAL_MAKE_CLEAN_FILES.rst b/share/cmake-3.6/Help/prop_dir/ADDITIONAL_MAKE_CLEAN_FILES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/ADDITIONAL_MAKE_CLEAN_FILES.rst
rename to share/cmake-3.6/Help/prop_dir/ADDITIONAL_MAKE_CLEAN_FILES.rst
diff --git a/share/cmake-3.2/Help/prop_dir/CACHE_VARIABLES.rst b/share/cmake-3.6/Help/prop_dir/CACHE_VARIABLES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/CACHE_VARIABLES.rst
rename to share/cmake-3.6/Help/prop_dir/CACHE_VARIABLES.rst
diff --git a/share/cmake-3.6/Help/prop_dir/CLEAN_NO_CUSTOM.rst b/share/cmake-3.6/Help/prop_dir/CLEAN_NO_CUSTOM.rst
new file mode 100644
index 0000000..5ae78bf
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/CLEAN_NO_CUSTOM.rst
@@ -0,0 +1,6 @@
+CLEAN_NO_CUSTOM
+---------------
+
+Set to true to tell :ref:`Makefile Generators` not to remove the outputs of
+custom commands for this directory during the ``make clean`` operation.
+This is ignored on other generators because it is not possible to implement.
diff --git a/share/cmake-3.2/Help/prop_dir/CMAKE_CONFIGURE_DEPENDS.rst b/share/cmake-3.6/Help/prop_dir/CMAKE_CONFIGURE_DEPENDS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/CMAKE_CONFIGURE_DEPENDS.rst
rename to share/cmake-3.6/Help/prop_dir/CMAKE_CONFIGURE_DEPENDS.rst
diff --git a/share/cmake-3.6/Help/prop_dir/COMPILE_DEFINITIONS.rst b/share/cmake-3.6/Help/prop_dir/COMPILE_DEFINITIONS.rst
new file mode 100644
index 0000000..85adcb5
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/COMPILE_DEFINITIONS.rst
@@ -0,0 +1,31 @@
+COMPILE_DEFINITIONS
+-------------------
+
+Preprocessor definitions for compiling a directory's sources.
+
+This property specifies the list of options given so far to the
+:command:`add_definitions` command.
+
+The ``COMPILE_DEFINITIONS`` property may be set to a semicolon-separated
+list of preprocessor definitions using the syntax ``VAR`` or ``VAR=value``.
+Function-style definitions are not supported.  CMake will
+automatically escape the value correctly for the native build system
+(note that CMake language syntax may require escapes to specify some
+values).
+
+This property will be initialized in each directory by its value in the
+directory's parent.
+
+CMake will automatically drop some definitions that are not supported
+by the native build tool.
+
+.. include:: /include/COMPILE_DEFINITIONS_DISCLAIMER.txt
+
+Contents of ``COMPILE_DEFINITIONS`` may use "generator expressions" with
+the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
+
+The corresponding :prop_dir:`COMPILE_DEFINITIONS_<CONFIG>` property may
+be set to specify per-configuration definitions.  Generator expressions
+should be preferred instead of setting the alternative property.
diff --git a/share/cmake-3.2/Help/prop_dir/COMPILE_DEFINITIONS_CONFIG.rst b/share/cmake-3.6/Help/prop_dir/COMPILE_DEFINITIONS_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/COMPILE_DEFINITIONS_CONFIG.rst
rename to share/cmake-3.6/Help/prop_dir/COMPILE_DEFINITIONS_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_dir/COMPILE_OPTIONS.rst b/share/cmake-3.6/Help/prop_dir/COMPILE_OPTIONS.rst
new file mode 100644
index 0000000..877deb0
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/COMPILE_OPTIONS.rst
@@ -0,0 +1,16 @@
+COMPILE_OPTIONS
+---------------
+
+List of options to pass to the compiler.
+
+This property holds a :ref:`;-list <CMake Language Lists>` of options
+given so far to the :command:`add_compile_options` command.
+
+This property is used to initialize the :prop_tgt:`COMPILE_OPTIONS` target
+property when a target is created, which is used by the generators to set
+the options for the compiler.
+
+Contents of ``COMPILE_OPTIONS`` may use "generator expressions" with the
+syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual
+for available expressions.  See the :manual:`cmake-buildsystem(7)` manual
+for more on defining buildsystem properties.
diff --git a/share/cmake-3.6/Help/prop_dir/DEFINITIONS.rst b/share/cmake-3.6/Help/prop_dir/DEFINITIONS.rst
new file mode 100644
index 0000000..79ac3f3
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/DEFINITIONS.rst
@@ -0,0 +1,13 @@
+DEFINITIONS
+-----------
+
+For CMake 2.4 compatibility only.  Use :prop_dir:`COMPILE_DEFINITIONS`
+instead.
+
+This read-only property specifies the list of flags given so far to
+the :command:`add_definitions` command.  It is intended for debugging
+purposes.  Use the :prop_dir:`COMPILE_DEFINITIONS` directory property
+instead.
+
+This built-in read-only property does not exist if policy
+:policy:`CMP0059` is set to ``NEW``.
diff --git a/share/cmake-3.2/Help/prop_dir/EXCLUDE_FROM_ALL.rst b/share/cmake-3.6/Help/prop_dir/EXCLUDE_FROM_ALL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/EXCLUDE_FROM_ALL.rst
rename to share/cmake-3.6/Help/prop_dir/EXCLUDE_FROM_ALL.rst
diff --git a/share/cmake-3.2/Help/prop_dir/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst b/share/cmake-3.6/Help/prop_dir/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst
rename to share/cmake-3.6/Help/prop_dir/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst
diff --git a/share/cmake-3.6/Help/prop_dir/INCLUDE_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_dir/INCLUDE_DIRECTORIES.rst
new file mode 100644
index 0000000..6789a56
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/INCLUDE_DIRECTORIES.rst
@@ -0,0 +1,26 @@
+INCLUDE_DIRECTORIES
+-------------------
+
+List of preprocessor include file search directories.
+
+This property specifies the list of directories given so far to the
+:command:`include_directories` command.
+
+This property is used to populate the :prop_tgt:`INCLUDE_DIRECTORIES`
+target property, which is used by the generators to set the include
+directories for the compiler.
+
+In addition to accepting values from that command, values may be set
+directly on any directory using the :command:`set_property` command.  A
+directory gets its initial value from its parent directory if it has one.
+The initial value of the :prop_tgt:`INCLUDE_DIRECTORIES` target property
+comes from the value of this property.  Both directory and target property
+values are adjusted by calls to the :command:`include_directories` command.
+
+The target property values are used by the generators to set the
+include paths for the compiler.
+
+Contents of ``INCLUDE_DIRECTORIES`` may use "generator expressions" with
+the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.6/Help/prop_dir/INCLUDE_REGULAR_EXPRESSION.rst b/share/cmake-3.6/Help/prop_dir/INCLUDE_REGULAR_EXPRESSION.rst
new file mode 100644
index 0000000..bb90c61
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/INCLUDE_REGULAR_EXPRESSION.rst
@@ -0,0 +1,9 @@
+INCLUDE_REGULAR_EXPRESSION
+--------------------------
+
+Include file scanning regular expression.
+
+This property specifies the regular expression used during
+dependency scanning to match include files that should be followed.
+See the :command:`include_regular_expression` command for a high-level
+interface to set this property.
diff --git a/share/cmake-3.2/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION.rst b/share/cmake-3.6/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION.rst
rename to share/cmake-3.6/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION.rst
diff --git a/share/cmake-3.2/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst b/share/cmake-3.6/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst
rename to share/cmake-3.6/Help/prop_dir/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_dir/LINK_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_dir/LINK_DIRECTORIES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/LINK_DIRECTORIES.rst
rename to share/cmake-3.6/Help/prop_dir/LINK_DIRECTORIES.rst
diff --git a/share/cmake-3.6/Help/prop_dir/LISTFILE_STACK.rst b/share/cmake-3.6/Help/prop_dir/LISTFILE_STACK.rst
new file mode 100644
index 0000000..22ec4b6
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/LISTFILE_STACK.rst
@@ -0,0 +1,10 @@
+LISTFILE_STACK
+--------------
+
+The current stack of listfiles being processed.
+
+This property is mainly useful when trying to debug errors in your
+CMake scripts.  It returns a list of what list files are currently
+being processed, in order.  So if one listfile does an
+:command:`include` command then that is effectively pushing the
+included listfile onto the stack.
diff --git a/share/cmake-3.2/Help/prop_dir/MACROS.rst b/share/cmake-3.6/Help/prop_dir/MACROS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/MACROS.rst
rename to share/cmake-3.6/Help/prop_dir/MACROS.rst
diff --git a/share/cmake-3.2/Help/prop_dir/PARENT_DIRECTORY.rst b/share/cmake-3.6/Help/prop_dir/PARENT_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/PARENT_DIRECTORY.rst
rename to share/cmake-3.6/Help/prop_dir/PARENT_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/prop_dir/RULE_LAUNCH_COMPILE.rst b/share/cmake-3.6/Help/prop_dir/RULE_LAUNCH_COMPILE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/RULE_LAUNCH_COMPILE.rst
rename to share/cmake-3.6/Help/prop_dir/RULE_LAUNCH_COMPILE.rst
diff --git a/share/cmake-3.2/Help/prop_dir/RULE_LAUNCH_CUSTOM.rst b/share/cmake-3.6/Help/prop_dir/RULE_LAUNCH_CUSTOM.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/RULE_LAUNCH_CUSTOM.rst
rename to share/cmake-3.6/Help/prop_dir/RULE_LAUNCH_CUSTOM.rst
diff --git a/share/cmake-3.2/Help/prop_dir/RULE_LAUNCH_LINK.rst b/share/cmake-3.6/Help/prop_dir/RULE_LAUNCH_LINK.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/RULE_LAUNCH_LINK.rst
rename to share/cmake-3.6/Help/prop_dir/RULE_LAUNCH_LINK.rst
diff --git a/share/cmake-3.2/Help/prop_dir/TEST_INCLUDE_FILE.rst b/share/cmake-3.6/Help/prop_dir/TEST_INCLUDE_FILE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/TEST_INCLUDE_FILE.rst
rename to share/cmake-3.6/Help/prop_dir/TEST_INCLUDE_FILE.rst
diff --git a/share/cmake-3.2/Help/prop_dir/VARIABLES.rst b/share/cmake-3.6/Help/prop_dir/VARIABLES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/VARIABLES.rst
rename to share/cmake-3.6/Help/prop_dir/VARIABLES.rst
diff --git a/share/cmake-3.2/Help/prop_dir/VS_GLOBAL_SECTION_POST_section.rst b/share/cmake-3.6/Help/prop_dir/VS_GLOBAL_SECTION_POST_section.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/VS_GLOBAL_SECTION_POST_section.rst
rename to share/cmake-3.6/Help/prop_dir/VS_GLOBAL_SECTION_POST_section.rst
diff --git a/share/cmake-3.2/Help/prop_dir/VS_GLOBAL_SECTION_PRE_section.rst b/share/cmake-3.6/Help/prop_dir/VS_GLOBAL_SECTION_PRE_section.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_dir/VS_GLOBAL_SECTION_PRE_section.rst
rename to share/cmake-3.6/Help/prop_dir/VS_GLOBAL_SECTION_PRE_section.rst
diff --git a/share/cmake-3.6/Help/prop_dir/VS_STARTUP_PROJECT.rst b/share/cmake-3.6/Help/prop_dir/VS_STARTUP_PROJECT.rst
new file mode 100644
index 0000000..edd4832
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_dir/VS_STARTUP_PROJECT.rst
@@ -0,0 +1,12 @@
+VS_STARTUP_PROJECT
+------------------
+
+Specify the default startup project in a Visual Studio solution.
+
+The property must be set to the name of an existing target.  This
+will cause that project to be listed first in the generated solution
+file causing Visual Studio to make it the startup project if the
+solution has never been opened before.
+
+If this property is not specified, then the "ALL_BUILD" project
+will be the default.
diff --git a/share/cmake-3.2/Help/prop_gbl/ALLOW_DUPLICATE_CUSTOM_TARGETS.rst b/share/cmake-3.6/Help/prop_gbl/ALLOW_DUPLICATE_CUSTOM_TARGETS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/ALLOW_DUPLICATE_CUSTOM_TARGETS.rst
rename to share/cmake-3.6/Help/prop_gbl/ALLOW_DUPLICATE_CUSTOM_TARGETS.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/AUTOGEN_TARGETS_FOLDER.rst b/share/cmake-3.6/Help/prop_gbl/AUTOGEN_TARGETS_FOLDER.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/AUTOGEN_TARGETS_FOLDER.rst
rename to share/cmake-3.6/Help/prop_gbl/AUTOGEN_TARGETS_FOLDER.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/AUTOMOC_TARGETS_FOLDER.rst b/share/cmake-3.6/Help/prop_gbl/AUTOMOC_TARGETS_FOLDER.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/AUTOMOC_TARGETS_FOLDER.rst
rename to share/cmake-3.6/Help/prop_gbl/AUTOMOC_TARGETS_FOLDER.rst
diff --git a/share/cmake-3.6/Help/prop_gbl/CMAKE_CXX_KNOWN_FEATURES.rst b/share/cmake-3.6/Help/prop_gbl/CMAKE_CXX_KNOWN_FEATURES.rst
new file mode 100644
index 0000000..e8f4d2a
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/CMAKE_CXX_KNOWN_FEATURES.rst
@@ -0,0 +1,303 @@
+CMAKE_CXX_KNOWN_FEATURES
+------------------------
+
+List of C++ features known to this version of CMake.
+
+The features listed in this global property may be known to be available to the
+C++ compiler.  If the feature is available with the C++ compiler, it will
+be listed in the :variable:`CMAKE_CXX_COMPILE_FEATURES` variable.
+
+The features listed here may be used with the :command:`target_compile_features`
+command.  See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+
+The features known to this version of CMake are:
+
+``cxx_aggregate_default_initializers``
+  Aggregate default initializers, as defined in N3605_.
+
+  .. _N3605: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3605.html
+
+``cxx_alias_templates``
+  Template aliases, as defined in N2258_.
+
+  .. _N2258: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2258.pdf
+
+``cxx_alignas``
+  Alignment control ``alignas``, as defined in N2341_.
+
+  .. _N2341: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2341.pdf
+
+``cxx_alignof``
+  Alignment control ``alignof``, as defined in N2341_.
+
+  .. _N2341: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2341.pdf
+
+``cxx_attributes``
+  Generic attributes, as defined in N2761_.
+
+  .. _N2761: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2761.pdf
+
+``cxx_attribute_deprecated``
+  ``[[deprecated]]`` attribute, as defined in N3760_.
+
+  .. _N3760: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3760.html
+
+``cxx_auto_type``
+  Automatic type deduction, as defined in N1984_.
+
+  .. _N1984: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n1984.pdf
+
+``cxx_binary_literals``
+  Binary literals, as defined in N3472_.
+
+  .. _N3472: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3472.pdf
+
+``cxx_constexpr``
+  Constant expressions, as defined in N2235_.
+
+  .. _N2235: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2235.pdf
+
+``cxx_contextual_conversions``
+  Contextual conversions, as defined in N3323_.
+
+  .. _N3323: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3323.pdf
+
+``cxx_decltype_incomplete_return_types``
+  Decltype on incomplete return types, as defined in N3276_.
+
+  .. _N3276 : http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3276.pdf
+
+``cxx_decltype``
+  Decltype, as defined in N2343_.
+
+  .. _N2343: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2343.pdf
+
+``cxx_decltype_auto``
+  ``decltype(auto)`` semantics, as defined in N3638_.
+
+  .. _N3638: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3638.html
+
+``cxx_default_function_template_args``
+  Default template arguments for function templates, as defined in DR226_
+
+  .. _DR226: http://www.open-std.org/jtc1/sc22/wg21/docs/cwg_defects.html#226
+
+``cxx_defaulted_functions``
+  Defaulted functions, as defined in N2346_.
+
+  .. _N2346: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2346.htm
+
+``cxx_defaulted_move_initializers``
+  Defaulted move initializers, as defined in N3053_.
+
+  .. _N3053: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3053.html
+
+``cxx_delegating_constructors``
+  Delegating constructors, as defined in N1986_.
+
+  .. _N1986: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n1986.pdf
+
+``cxx_deleted_functions``
+  Deleted functions, as defined in N2346_.
+
+  .. _N2346: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2346.htm
+
+``cxx_digit_separators``
+  Digit separators, as defined in N3781_.
+
+  .. _N3781: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3781.pdf
+
+``cxx_enum_forward_declarations``
+  Enum forward declarations, as defined in N2764_.
+
+  .. _N2764: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2764.pdf
+
+``cxx_explicit_conversions``
+  Explicit conversion operators, as defined in N2437_.
+
+  .. _N2437: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2437.pdf
+
+``cxx_extended_friend_declarations``
+  Extended friend declarations, as defined in N1791_.
+
+  .. _N1791: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2005/n1791.pdf
+
+``cxx_extern_templates``
+  Extern templates, as defined in N1987_.
+
+  .. _N1987: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n1987.htm
+
+``cxx_final``
+  Override control ``final`` keyword, as defined in N2928_, N3206_ and N3272_.
+
+  .. _N2928: http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2928.htm
+  .. _N3206: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3206.htm
+  .. _N3272: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3272.htm
+
+``cxx_func_identifier``
+  Predefined ``__func__`` identifier, as defined in N2340_.
+
+  .. _N2340: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2340.htm
+
+``cxx_generalized_initializers``
+  Initializer lists, as defined in N2672_.
+
+  .. _N2672: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2672.htm
+
+``cxx_generic_lambdas``
+  Generic lambdas, as defined in N3649_.
+
+  .. _N3649: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3649.html
+
+``cxx_inheriting_constructors``
+  Inheriting constructors, as defined in N2540_.
+
+  .. _N2540: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2540.htm
+
+``cxx_inline_namespaces``
+  Inline namespaces, as defined in N2535_.
+
+  .. _N2535: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2535.htm
+
+``cxx_lambdas``
+  Lambda functions, as defined in N2927_.
+
+  .. _N2927: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2927.pdf
+
+``cxx_lambda_init_captures``
+  Initialized lambda captures, as defined in N3648_.
+
+  .. _N3648: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3648.html
+
+``cxx_local_type_template_args``
+  Local and unnamed types as template arguments, as defined in N2657_.
+
+  .. _N2657: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2657.htm
+
+``cxx_long_long_type``
+  ``long long`` type, as defined in N1811_.
+
+  .. _N1811: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2005/n1811.pdf
+
+``cxx_noexcept``
+  Exception specifications, as defined in N3050_.
+
+  .. _N3050: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3050.html
+
+``cxx_nonstatic_member_init``
+  Non-static data member initialization, as defined in N2756_.
+
+  .. _N2756: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2756.htm
+
+``cxx_nullptr``
+  Null pointer, as defined in N2431_.
+
+  .. _N2431: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
+
+``cxx_override``
+  Override control ``override`` keyword, as defined in N2928_, N3206_
+  and N3272_.
+
+  .. _N2928: http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2009/n2928.htm
+  .. _N3206: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2010/n3206.htm
+  .. _N3272: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3272.htm
+
+``cxx_range_for``
+  Range-based for, as defined in N2930_.
+
+  .. _N2930: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2009/n2930.html
+
+``cxx_raw_string_literals``
+  Raw string literals, as defined in N2442_.
+
+  .. _N2442: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2442.htm
+
+``cxx_reference_qualified_functions``
+  Reference qualified functions, as defined in N2439_.
+
+  .. _N2439: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2439.htm
+
+``cxx_relaxed_constexpr``
+  Relaxed constexpr, as defined in N3652_.
+
+  .. _N3652: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3652.html
+
+``cxx_return_type_deduction``
+  Return type deduction on normal functions, as defined in N3386_.
+
+  .. _N3386: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3386.html
+
+``cxx_right_angle_brackets``
+  Right angle bracket parsing, as defined in N1757_.
+
+  .. _N1757: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2005/n1757.html
+
+``cxx_rvalue_references``
+  R-value references, as defined in N2118_.
+
+  .. _N2118: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2006/n2118.html
+
+``cxx_sizeof_member``
+  Size of non-static data members, as defined in N2253_.
+
+  .. _N2253: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2253.html
+
+``cxx_static_assert``
+  Static assert, as defined in N1720_.
+
+  .. _N1720: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2004/n1720.html
+
+``cxx_strong_enums``
+  Strongly typed enums, as defined in N2347_.
+
+  .. _N2347: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2347.pdf
+
+``cxx_thread_local``
+  Thread-local variables, as defined in N2659_.
+
+  .. _N2659: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2659.htm
+
+``cxx_trailing_return_types``
+  Automatic function return type, as defined in N2541_.
+
+  .. _N2541: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2541.htm
+
+``cxx_unicode_literals``
+  Unicode string literals, as defined in N2442_.
+
+  .. _N2442: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2442.htm
+
+``cxx_uniform_initialization``
+  Uniform initialization, as defined in N2640_.
+
+  .. _N2640: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2640.pdf
+
+``cxx_unrestricted_unions``
+  Unrestricted unions, as defined in N2544_.
+
+  .. _N2544: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2544.pdf
+
+``cxx_user_literals``
+  User-defined literals, as defined in N2765_.
+
+  .. _N2765: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2765.pdf
+
+``cxx_variable_templates``
+  Variable templates, as defined in N3651_.
+
+  .. _N3651: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3651.pdf
+
+``cxx_variadic_macros``
+  Variadic macros, as defined in N1653_.
+
+  .. _N1653: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2004/n1653.htm
+
+``cxx_variadic_templates``
+  Variadic templates, as defined in N2242_.
+
+  .. _N2242: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2242.pdf
+
+``cxx_template_template_parameters``
+  Template template parameters, as defined in ``ISO/IEC 14882:1998``.
diff --git a/share/cmake-3.6/Help/prop_gbl/CMAKE_C_KNOWN_FEATURES.rst b/share/cmake-3.6/Help/prop_gbl/CMAKE_C_KNOWN_FEATURES.rst
new file mode 100644
index 0000000..a08af00
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/CMAKE_C_KNOWN_FEATURES.rst
@@ -0,0 +1,26 @@
+CMAKE_C_KNOWN_FEATURES
+----------------------
+
+List of C features known to this version of CMake.
+
+The features listed in this global property may be known to be available to the
+C compiler.  If the feature is available with the C compiler, it will
+be listed in the :variable:`CMAKE_C_COMPILE_FEATURES` variable.
+
+The features listed here may be used with the :command:`target_compile_features`
+command.  See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+The features known to this version of CMake are:
+
+``c_function_prototypes``
+  Function prototypes, as defined in ``ISO/IEC 9899:1990``.
+
+``c_restrict``
+  ``restrict`` keyword, as defined in ``ISO/IEC 9899:1999``.
+
+``c_static_assert``
+  Static assert, as defined in ``ISO/IEC 9899:2011``.
+
+``c_variadic_macros``
+  Variadic macros, as defined in ``ISO/IEC 9899:1999``.
diff --git a/share/cmake-3.2/Help/prop_gbl/DEBUG_CONFIGURATIONS.rst b/share/cmake-3.6/Help/prop_gbl/DEBUG_CONFIGURATIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/DEBUG_CONFIGURATIONS.rst
rename to share/cmake-3.6/Help/prop_gbl/DEBUG_CONFIGURATIONS.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/DISABLED_FEATURES.rst b/share/cmake-3.6/Help/prop_gbl/DISABLED_FEATURES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/DISABLED_FEATURES.rst
rename to share/cmake-3.6/Help/prop_gbl/DISABLED_FEATURES.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/ECLIPSE_EXTRA_NATURES.rst b/share/cmake-3.6/Help/prop_gbl/ECLIPSE_EXTRA_NATURES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/ECLIPSE_EXTRA_NATURES.rst
rename to share/cmake-3.6/Help/prop_gbl/ECLIPSE_EXTRA_NATURES.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/ENABLED_FEATURES.rst b/share/cmake-3.6/Help/prop_gbl/ENABLED_FEATURES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/ENABLED_FEATURES.rst
rename to share/cmake-3.6/Help/prop_gbl/ENABLED_FEATURES.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/ENABLED_LANGUAGES.rst b/share/cmake-3.6/Help/prop_gbl/ENABLED_LANGUAGES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/ENABLED_LANGUAGES.rst
rename to share/cmake-3.6/Help/prop_gbl/ENABLED_LANGUAGES.rst
diff --git a/share/cmake-3.6/Help/prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS.rst b/share/cmake-3.6/Help/prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS.rst
new file mode 100644
index 0000000..e52f8eb
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/FIND_LIBRARY_USE_LIB64_PATHS.rst
@@ -0,0 +1,10 @@
+FIND_LIBRARY_USE_LIB64_PATHS
+----------------------------
+
+Whether :command:`find_library` should automatically search lib64
+directories.
+
+FIND_LIBRARY_USE_LIB64_PATHS is a boolean specifying whether the
+:command:`find_library` command should automatically search the lib64
+variant of directories called lib in the search path when building
+64-bit binaries.
diff --git a/share/cmake-3.6/Help/prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING.rst b/share/cmake-3.6/Help/prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING.rst
new file mode 100644
index 0000000..beb94ac
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/FIND_LIBRARY_USE_OPENBSD_VERSIONING.rst
@@ -0,0 +1,10 @@
+FIND_LIBRARY_USE_OPENBSD_VERSIONING
+-----------------------------------
+
+Whether :command:`find_library` should find OpenBSD-style shared
+libraries.
+
+This property is a boolean specifying whether the
+:command:`find_library` command should find shared libraries with
+OpenBSD-style versioned extension: ".so.<major>.<minor>".  The
+property is set to true on OpenBSD and false on other platforms.
diff --git a/share/cmake-3.2/Help/prop_gbl/GLOBAL_DEPENDS_DEBUG_MODE.rst b/share/cmake-3.6/Help/prop_gbl/GLOBAL_DEPENDS_DEBUG_MODE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/GLOBAL_DEPENDS_DEBUG_MODE.rst
rename to share/cmake-3.6/Help/prop_gbl/GLOBAL_DEPENDS_DEBUG_MODE.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/GLOBAL_DEPENDS_NO_CYCLES.rst b/share/cmake-3.6/Help/prop_gbl/GLOBAL_DEPENDS_NO_CYCLES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/GLOBAL_DEPENDS_NO_CYCLES.rst
rename to share/cmake-3.6/Help/prop_gbl/GLOBAL_DEPENDS_NO_CYCLES.rst
diff --git a/share/cmake-3.6/Help/prop_gbl/IN_TRY_COMPILE.rst b/share/cmake-3.6/Help/prop_gbl/IN_TRY_COMPILE.rst
new file mode 100644
index 0000000..fd2d2e1
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/IN_TRY_COMPILE.rst
@@ -0,0 +1,7 @@
+IN_TRY_COMPILE
+--------------
+
+Read-only property that is true during a try-compile configuration.
+
+True when building a project inside a :command:`try_compile` or
+:command:`try_run` command.
diff --git a/share/cmake-3.2/Help/prop_gbl/JOB_POOLS.rst b/share/cmake-3.6/Help/prop_gbl/JOB_POOLS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/JOB_POOLS.rst
rename to share/cmake-3.6/Help/prop_gbl/JOB_POOLS.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/PACKAGES_FOUND.rst b/share/cmake-3.6/Help/prop_gbl/PACKAGES_FOUND.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/PACKAGES_FOUND.rst
rename to share/cmake-3.6/Help/prop_gbl/PACKAGES_FOUND.rst
diff --git a/share/cmake-3.2/Help/prop_gbl/PACKAGES_NOT_FOUND.rst b/share/cmake-3.6/Help/prop_gbl/PACKAGES_NOT_FOUND.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/PACKAGES_NOT_FOUND.rst
rename to share/cmake-3.6/Help/prop_gbl/PACKAGES_NOT_FOUND.rst
diff --git a/share/cmake-3.6/Help/prop_gbl/PREDEFINED_TARGETS_FOLDER.rst b/share/cmake-3.6/Help/prop_gbl/PREDEFINED_TARGETS_FOLDER.rst
new file mode 100644
index 0000000..bf8c9a3
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/PREDEFINED_TARGETS_FOLDER.rst
@@ -0,0 +1,9 @@
+PREDEFINED_TARGETS_FOLDER
+-------------------------
+
+Name of FOLDER for targets that are added automatically by CMake.
+
+If not set, CMake uses "CMakePredefinedTargets" as a default value for
+this property.  Targets such as INSTALL, PACKAGE and RUN_TESTS will be
+organized into this FOLDER.  See also the documentation for the
+:prop_tgt:`FOLDER` target property.
diff --git a/share/cmake-3.2/Help/prop_gbl/REPORT_UNDEFINED_PROPERTIES.rst b/share/cmake-3.6/Help/prop_gbl/REPORT_UNDEFINED_PROPERTIES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/REPORT_UNDEFINED_PROPERTIES.rst
rename to share/cmake-3.6/Help/prop_gbl/REPORT_UNDEFINED_PROPERTIES.rst
diff --git a/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_COMPILE.rst b/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_COMPILE.rst
new file mode 100644
index 0000000..e0df878
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_COMPILE.rst
@@ -0,0 +1,11 @@
+RULE_LAUNCH_COMPILE
+-------------------
+
+Specify a launcher for compile rules.
+
+:ref:`Makefile Generators` and the :generator:`Ninja` generator prefix
+compiler commands with the given launcher command line.
+This is intended to allow launchers to intercept build problems
+with high granularity.  Other generators ignore this property
+because their underlying build systems provide no hook to wrap
+individual commands with a launcher.
diff --git a/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_CUSTOM.rst b/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_CUSTOM.rst
new file mode 100644
index 0000000..b20c59b
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_CUSTOM.rst
@@ -0,0 +1,11 @@
+RULE_LAUNCH_CUSTOM
+------------------
+
+Specify a launcher for custom rules.
+
+:ref:`Makefile Generators` and the :generator:`Ninja` generator prefix
+custom commands with the given launcher command line.
+This is intended to allow launchers to intercept build problems
+with high granularity.  Other generators ignore this property
+because their underlying build systems provide no hook to wrap
+individual commands with a launcher.
diff --git a/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_LINK.rst b/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_LINK.rst
new file mode 100644
index 0000000..567bb68
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/RULE_LAUNCH_LINK.rst
@@ -0,0 +1,11 @@
+RULE_LAUNCH_LINK
+----------------
+
+Specify a launcher for link rules.
+
+:ref:`Makefile Generators` and the :generator:`Ninja` generator prefix
+link and archive commands with the given launcher command line.
+This is intended to allow launchers to intercept build problems
+with high granularity.  Other generators ignore this property
+because their underlying build systems provide no hook to wrap
+individual commands with a launcher.
diff --git a/share/cmake-3.6/Help/prop_gbl/RULE_MESSAGES.rst b/share/cmake-3.6/Help/prop_gbl/RULE_MESSAGES.rst
new file mode 100644
index 0000000..87a5ca6
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/RULE_MESSAGES.rst
@@ -0,0 +1,13 @@
+RULE_MESSAGES
+-------------
+
+Specify whether to report a message for each make rule.
+
+This property specifies whether Makefile generators should add a
+progress message describing what each build rule does.  If the
+property is not set the default is ON.  Set the property to OFF to
+disable granular messages and report only as each target completes.
+This is intended to allow scripted builds to avoid the build time cost
+of detailed reports.  If a ``CMAKE_RULE_MESSAGES`` cache entry exists
+its value initializes the value of this property.  Non-Makefile
+generators currently ignore this property.
diff --git a/share/cmake-3.2/Help/prop_gbl/TARGET_ARCHIVES_MAY_BE_SHARED_LIBS.rst b/share/cmake-3.6/Help/prop_gbl/TARGET_ARCHIVES_MAY_BE_SHARED_LIBS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/TARGET_ARCHIVES_MAY_BE_SHARED_LIBS.rst
rename to share/cmake-3.6/Help/prop_gbl/TARGET_ARCHIVES_MAY_BE_SHARED_LIBS.rst
diff --git a/share/cmake-3.6/Help/prop_gbl/TARGET_MESSAGES.rst b/share/cmake-3.6/Help/prop_gbl/TARGET_MESSAGES.rst
new file mode 100644
index 0000000..275b074
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/TARGET_MESSAGES.rst
@@ -0,0 +1,20 @@
+TARGET_MESSAGES
+---------------
+
+Specify whether to report the completion of each target.
+
+This property specifies whether :ref:`Makefile Generators` should
+add a progress message describing that each target has been completed.
+If the property is not set the default is ``ON``.  Set the property
+to ``OFF`` to disable target completion messages.
+
+This option is intended to reduce build output when little or no
+work needs to be done to bring the build tree up to date.
+
+If a ``CMAKE_TARGET_MESSAGES`` cache entry exists its value
+initializes the value of this property.
+
+Non-Makefile generators currently ignore this property.
+
+See the counterpart property :prop_gbl:`RULE_MESSAGES` to disable
+everything except for target completion messages.
diff --git a/share/cmake-3.2/Help/prop_gbl/TARGET_SUPPORTS_SHARED_LIBS.rst b/share/cmake-3.6/Help/prop_gbl/TARGET_SUPPORTS_SHARED_LIBS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_gbl/TARGET_SUPPORTS_SHARED_LIBS.rst
rename to share/cmake-3.6/Help/prop_gbl/TARGET_SUPPORTS_SHARED_LIBS.rst
diff --git a/share/cmake-3.6/Help/prop_gbl/USE_FOLDERS.rst b/share/cmake-3.6/Help/prop_gbl/USE_FOLDERS.rst
new file mode 100644
index 0000000..a1b4ccb
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_gbl/USE_FOLDERS.rst
@@ -0,0 +1,10 @@
+USE_FOLDERS
+-----------
+
+Use the :prop_tgt:`FOLDER` target property to organize targets into
+folders.
+
+If not set, CMake treats this property as OFF by default.  CMake
+generators that are capable of organizing into a hierarchy of folders
+use the values of the :prop_tgt:`FOLDER` target property to name those
+folders. See also the documentation for the FOLDER target property.
diff --git a/share/cmake-3.6/Help/prop_inst/CPACK_DESKTOP_SHORTCUTS.rst b/share/cmake-3.6/Help/prop_inst/CPACK_DESKTOP_SHORTCUTS.rst
new file mode 100644
index 0000000..11f2c03
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_inst/CPACK_DESKTOP_SHORTCUTS.rst
@@ -0,0 +1,7 @@
+CPACK_DESKTOP_SHORTCUTS
+-----------------------
+
+Species a list of shortcut names that should be created on the Desktop
+for this file.
+
+The property is currently only supported by the WIX generator.
diff --git a/share/cmake-3.2/Help/prop_inst/CPACK_NEVER_OVERWRITE.rst b/share/cmake-3.6/Help/prop_inst/CPACK_NEVER_OVERWRITE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_inst/CPACK_NEVER_OVERWRITE.rst
rename to share/cmake-3.6/Help/prop_inst/CPACK_NEVER_OVERWRITE.rst
diff --git a/share/cmake-3.2/Help/prop_inst/CPACK_PERMANENT.rst b/share/cmake-3.6/Help/prop_inst/CPACK_PERMANENT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_inst/CPACK_PERMANENT.rst
rename to share/cmake-3.6/Help/prop_inst/CPACK_PERMANENT.rst
diff --git a/share/cmake-3.6/Help/prop_inst/CPACK_STARTUP_SHORTCUTS.rst b/share/cmake-3.6/Help/prop_inst/CPACK_STARTUP_SHORTCUTS.rst
new file mode 100644
index 0000000..8a16022
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_inst/CPACK_STARTUP_SHORTCUTS.rst
@@ -0,0 +1,7 @@
+CPACK_STARTUP_SHORTCUTS
+-----------------------
+
+Species a list of shortcut names that should be created in the Startup folder
+for this file.
+
+The property is currently only supported by the WIX generator.
diff --git a/share/cmake-3.6/Help/prop_inst/CPACK_START_MENU_SHORTCUTS.rst b/share/cmake-3.6/Help/prop_inst/CPACK_START_MENU_SHORTCUTS.rst
new file mode 100644
index 0000000..d30ea39
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_inst/CPACK_START_MENU_SHORTCUTS.rst
@@ -0,0 +1,7 @@
+CPACK_START_MENU_SHORTCUTS
+--------------------------
+
+Species a list of shortcut names that should be created in the Start Menu
+for this file.
+
+The property is currently only supported by the WIX generator.
diff --git a/share/cmake-3.2/Help/prop_inst/CPACK_WIX_ACL.rst b/share/cmake-3.6/Help/prop_inst/CPACK_WIX_ACL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_inst/CPACK_WIX_ACL.rst
rename to share/cmake-3.6/Help/prop_inst/CPACK_WIX_ACL.rst
diff --git a/share/cmake-3.2/Help/prop_sf/ABSTRACT.rst b/share/cmake-3.6/Help/prop_sf/ABSTRACT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/ABSTRACT.rst
rename to share/cmake-3.6/Help/prop_sf/ABSTRACT.rst
diff --git a/share/cmake-3.2/Help/prop_sf/AUTORCC_OPTIONS.rst b/share/cmake-3.6/Help/prop_sf/AUTORCC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/AUTORCC_OPTIONS.rst
rename to share/cmake-3.6/Help/prop_sf/AUTORCC_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/prop_sf/AUTOUIC_OPTIONS.rst b/share/cmake-3.6/Help/prop_sf/AUTOUIC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/AUTOUIC_OPTIONS.rst
rename to share/cmake-3.6/Help/prop_sf/AUTOUIC_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/prop_sf/COMPILE_DEFINITIONS.rst b/share/cmake-3.6/Help/prop_sf/COMPILE_DEFINITIONS.rst
new file mode 100644
index 0000000..1626825
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_sf/COMPILE_DEFINITIONS.rst
@@ -0,0 +1,19 @@
+COMPILE_DEFINITIONS
+-------------------
+
+Preprocessor definitions for compiling a source file.
+
+The COMPILE_DEFINITIONS property may be set to a semicolon-separated
+list of preprocessor definitions using the syntax VAR or VAR=value.
+Function-style definitions are not supported.  CMake will
+automatically escape the value correctly for the native build system
+(note that CMake language syntax may require escapes to specify some
+values).  This property may be set on a per-configuration basis using
+the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
+name (ex.  "COMPILE_DEFINITIONS_DEBUG").
+
+CMake will automatically drop some definitions that are not supported
+by the native build tool.  Xcode does not support per-configuration
+definitions on source files.
+
+.. include:: /include/COMPILE_DEFINITIONS_DISCLAIMER.txt
diff --git a/share/cmake-3.2/Help/prop_sf/COMPILE_DEFINITIONS_CONFIG.rst b/share/cmake-3.6/Help/prop_sf/COMPILE_DEFINITIONS_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/COMPILE_DEFINITIONS_CONFIG.rst
rename to share/cmake-3.6/Help/prop_sf/COMPILE_DEFINITIONS_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_sf/COMPILE_FLAGS.rst b/share/cmake-3.6/Help/prop_sf/COMPILE_FLAGS.rst
new file mode 100644
index 0000000..086a063
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_sf/COMPILE_FLAGS.rst
@@ -0,0 +1,8 @@
+COMPILE_FLAGS
+-------------
+
+Additional flags to be added when compiling this source file.
+
+These flags will be added to the list of compile flags when this
+source file builds.  Use :prop_sf:`COMPILE_DEFINITIONS` to pass
+additional preprocessor definitions.
diff --git a/share/cmake-3.2/Help/prop_sf/EXTERNAL_OBJECT.rst b/share/cmake-3.6/Help/prop_sf/EXTERNAL_OBJECT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/EXTERNAL_OBJECT.rst
rename to share/cmake-3.6/Help/prop_sf/EXTERNAL_OBJECT.rst
diff --git a/share/cmake-3.2/Help/prop_sf/Fortran_FORMAT.rst b/share/cmake-3.6/Help/prop_sf/Fortran_FORMAT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/Fortran_FORMAT.rst
rename to share/cmake-3.6/Help/prop_sf/Fortran_FORMAT.rst
diff --git a/share/cmake-3.2/Help/prop_sf/GENERATED.rst b/share/cmake-3.6/Help/prop_sf/GENERATED.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/GENERATED.rst
rename to share/cmake-3.6/Help/prop_sf/GENERATED.rst
diff --git a/share/cmake-3.2/Help/prop_sf/HEADER_FILE_ONLY.rst b/share/cmake-3.6/Help/prop_sf/HEADER_FILE_ONLY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/HEADER_FILE_ONLY.rst
rename to share/cmake-3.6/Help/prop_sf/HEADER_FILE_ONLY.rst
diff --git a/share/cmake-3.2/Help/prop_sf/KEEP_EXTENSION.rst b/share/cmake-3.6/Help/prop_sf/KEEP_EXTENSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/KEEP_EXTENSION.rst
rename to share/cmake-3.6/Help/prop_sf/KEEP_EXTENSION.rst
diff --git a/share/cmake-3.2/Help/prop_sf/LABELS.rst b/share/cmake-3.6/Help/prop_sf/LABELS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/LABELS.rst
rename to share/cmake-3.6/Help/prop_sf/LABELS.rst
diff --git a/share/cmake-3.2/Help/prop_sf/LANGUAGE.rst b/share/cmake-3.6/Help/prop_sf/LANGUAGE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/LANGUAGE.rst
rename to share/cmake-3.6/Help/prop_sf/LANGUAGE.rst
diff --git a/share/cmake-3.2/Help/prop_sf/LOCATION.rst b/share/cmake-3.6/Help/prop_sf/LOCATION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/LOCATION.rst
rename to share/cmake-3.6/Help/prop_sf/LOCATION.rst
diff --git a/share/cmake-3.6/Help/prop_sf/MACOSX_PACKAGE_LOCATION.rst b/share/cmake-3.6/Help/prop_sf/MACOSX_PACKAGE_LOCATION.rst
new file mode 100644
index 0000000..69cdcb7
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_sf/MACOSX_PACKAGE_LOCATION.rst
@@ -0,0 +1,23 @@
+MACOSX_PACKAGE_LOCATION
+-----------------------
+
+Place a source file inside a Application Bundle
+(:prop_tgt:`MACOSX_BUNDLE`), Core Foundation Bundle (:prop_tgt:`BUNDLE`),
+or Framework Bundle (:prop_tgt:`FRAMEWORK`).  It is applicable for OS X
+and iOS.
+
+Executable targets with the :prop_tgt:`MACOSX_BUNDLE` property set are
+built as OS X or iOS application bundles on Apple platforms.  Shared
+library targets with the :prop_tgt:`FRAMEWORK` property set are built as
+OS X or iOS frameworks on Apple platforms.  Module library targets with
+the :prop_tgt:`BUNDLE` property set are built as OS X ``CFBundle`` bundles
+on Apple platforms.  Source files listed in the target with this property
+set will be copied to a directory inside the bundle or framework content
+folder specified by the property value.  For OS X Application Bundles the
+content folder is ``<name>.app/Contents``.  For OS X Frameworks the
+content folder is ``<name>.framework/Versions/<version>``.  For OS X
+CFBundles the content folder is ``<name>.bundle/Contents`` (unless the
+extension is changed).  See the :prop_tgt:`PUBLIC_HEADER`,
+:prop_tgt:`PRIVATE_HEADER`, and :prop_tgt:`RESOURCE` target properties for
+specifying files meant for ``Headers``, ``PrivateHeaders``, or
+``Resources`` directories.
diff --git a/share/cmake-3.6/Help/prop_sf/OBJECT_DEPENDS.rst b/share/cmake-3.6/Help/prop_sf/OBJECT_DEPENDS.rst
new file mode 100644
index 0000000..1d24960
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_sf/OBJECT_DEPENDS.rst
@@ -0,0 +1,21 @@
+OBJECT_DEPENDS
+--------------
+
+Additional files on which a compiled object file depends.
+
+Specifies a :ref:`;-list <CMake Language Lists>` of full-paths to
+files on which any object files compiled from this source file depend.
+On :ref:`Makefile Generators` and the :generator:`Ninja` generator an
+object file will be recompiled if any of the named files is newer than it.
+:ref:`Visual Studio Generators` and the :generator:`Xcode` generator
+cannot implement such compilation dependencies.
+
+This property need not be used to specify the dependency of a source
+file on a generated header file that it includes.  Although the
+property was originally introduced for this purpose, it is no longer
+necessary.  If the generated header file is created by a custom
+command in the same target as the source file, the automatic
+dependency scanning process will recognize the dependency.  If the
+generated header file is created by another target, an inter-target
+dependency should be created with the :command:`add_dependencies`
+command (if one does not already exist due to linking relationships).
diff --git a/share/cmake-3.2/Help/prop_sf/OBJECT_OUTPUTS.rst b/share/cmake-3.6/Help/prop_sf/OBJECT_OUTPUTS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/OBJECT_OUTPUTS.rst
rename to share/cmake-3.6/Help/prop_sf/OBJECT_OUTPUTS.rst
diff --git a/share/cmake-3.2/Help/prop_sf/SYMBOLIC.rst b/share/cmake-3.6/Help/prop_sf/SYMBOLIC.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/SYMBOLIC.rst
rename to share/cmake-3.6/Help/prop_sf/SYMBOLIC.rst
diff --git a/share/cmake-3.2/Help/prop_sf/VS_DEPLOYMENT_CONTENT.rst b/share/cmake-3.6/Help/prop_sf/VS_DEPLOYMENT_CONTENT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/VS_DEPLOYMENT_CONTENT.rst
rename to share/cmake-3.6/Help/prop_sf/VS_DEPLOYMENT_CONTENT.rst
diff --git a/share/cmake-3.2/Help/prop_sf/VS_DEPLOYMENT_LOCATION.rst b/share/cmake-3.6/Help/prop_sf/VS_DEPLOYMENT_LOCATION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/VS_DEPLOYMENT_LOCATION.rst
rename to share/cmake-3.6/Help/prop_sf/VS_DEPLOYMENT_LOCATION.rst
diff --git a/share/cmake-3.2/Help/prop_sf/VS_SHADER_ENTRYPOINT.rst b/share/cmake-3.6/Help/prop_sf/VS_SHADER_ENTRYPOINT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/VS_SHADER_ENTRYPOINT.rst
rename to share/cmake-3.6/Help/prop_sf/VS_SHADER_ENTRYPOINT.rst
diff --git a/share/cmake-3.2/Help/prop_sf/VS_SHADER_FLAGS.rst b/share/cmake-3.6/Help/prop_sf/VS_SHADER_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/VS_SHADER_FLAGS.rst
rename to share/cmake-3.6/Help/prop_sf/VS_SHADER_FLAGS.rst
diff --git a/share/cmake-3.2/Help/prop_sf/VS_SHADER_MODEL.rst b/share/cmake-3.6/Help/prop_sf/VS_SHADER_MODEL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/VS_SHADER_MODEL.rst
rename to share/cmake-3.6/Help/prop_sf/VS_SHADER_MODEL.rst
diff --git a/share/cmake-3.2/Help/prop_sf/VS_SHADER_TYPE.rst b/share/cmake-3.6/Help/prop_sf/VS_SHADER_TYPE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/VS_SHADER_TYPE.rst
rename to share/cmake-3.6/Help/prop_sf/VS_SHADER_TYPE.rst
diff --git a/share/cmake-3.6/Help/prop_sf/VS_XAML_TYPE.rst b/share/cmake-3.6/Help/prop_sf/VS_XAML_TYPE.rst
new file mode 100644
index 0000000..e92191d
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_sf/VS_XAML_TYPE.rst
@@ -0,0 +1,6 @@
+VS_XAML_TYPE
+------------
+
+Mark a XAML source file as a different type than the default ``Page``.
+The most common usage would be to set the default App.xaml file as
+ApplicationDefinition.
diff --git a/share/cmake-3.2/Help/prop_sf/WRAP_EXCLUDE.rst b/share/cmake-3.6/Help/prop_sf/WRAP_EXCLUDE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/WRAP_EXCLUDE.rst
rename to share/cmake-3.6/Help/prop_sf/WRAP_EXCLUDE.rst
diff --git a/share/cmake-3.2/Help/prop_sf/XCODE_EXPLICIT_FILE_TYPE.rst b/share/cmake-3.6/Help/prop_sf/XCODE_EXPLICIT_FILE_TYPE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/XCODE_EXPLICIT_FILE_TYPE.rst
rename to share/cmake-3.6/Help/prop_sf/XCODE_EXPLICIT_FILE_TYPE.rst
diff --git a/share/cmake-3.2/Help/prop_sf/XCODE_LAST_KNOWN_FILE_TYPE.rst b/share/cmake-3.6/Help/prop_sf/XCODE_LAST_KNOWN_FILE_TYPE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_sf/XCODE_LAST_KNOWN_FILE_TYPE.rst
rename to share/cmake-3.6/Help/prop_sf/XCODE_LAST_KNOWN_FILE_TYPE.rst
diff --git a/share/cmake-3.2/Help/prop_test/ATTACHED_FILES.rst b/share/cmake-3.6/Help/prop_test/ATTACHED_FILES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/ATTACHED_FILES.rst
rename to share/cmake-3.6/Help/prop_test/ATTACHED_FILES.rst
diff --git a/share/cmake-3.6/Help/prop_test/ATTACHED_FILES_ON_FAIL.rst b/share/cmake-3.6/Help/prop_test/ATTACHED_FILES_ON_FAIL.rst
new file mode 100644
index 0000000..add54b2
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_test/ATTACHED_FILES_ON_FAIL.rst
@@ -0,0 +1,7 @@
+ATTACHED_FILES_ON_FAIL
+----------------------
+
+Attach a list of files to a dashboard submission if the test fails.
+
+Same as :prop_test:`ATTACHED_FILES`, but these files will only be
+included if the test does not pass.
diff --git a/share/cmake-3.2/Help/prop_test/COST.rst b/share/cmake-3.6/Help/prop_test/COST.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/COST.rst
rename to share/cmake-3.6/Help/prop_test/COST.rst
diff --git a/share/cmake-3.2/Help/prop_test/DEPENDS.rst b/share/cmake-3.6/Help/prop_test/DEPENDS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/DEPENDS.rst
rename to share/cmake-3.6/Help/prop_test/DEPENDS.rst
diff --git a/share/cmake-3.2/Help/prop_test/ENVIRONMENT.rst b/share/cmake-3.6/Help/prop_test/ENVIRONMENT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/ENVIRONMENT.rst
rename to share/cmake-3.6/Help/prop_test/ENVIRONMENT.rst
diff --git a/share/cmake-3.6/Help/prop_test/FAIL_REGULAR_EXPRESSION.rst b/share/cmake-3.6/Help/prop_test/FAIL_REGULAR_EXPRESSION.rst
new file mode 100644
index 0000000..facf902
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_test/FAIL_REGULAR_EXPRESSION.rst
@@ -0,0 +1,15 @@
+FAIL_REGULAR_EXPRESSION
+-----------------------
+
+If the output matches this regular expression the test will fail.
+
+If set, if the output matches one of specified regular expressions,
+the test will fail.  Example:
+
+.. code-block:: cmake
+
+  set_tests_properties(mytest PROPERTIES
+    FAIL_REGULAR_EXPRESSION "[^a-z]Error;ERROR;Failed"
+  )
+
+``FAIL_REGULAR_EXPRESSION`` expects a list of regular expressions.
diff --git a/share/cmake-3.2/Help/prop_test/LABELS.rst b/share/cmake-3.6/Help/prop_test/LABELS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/LABELS.rst
rename to share/cmake-3.6/Help/prop_test/LABELS.rst
diff --git a/share/cmake-3.2/Help/prop_test/MEASUREMENT.rst b/share/cmake-3.6/Help/prop_test/MEASUREMENT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/MEASUREMENT.rst
rename to share/cmake-3.6/Help/prop_test/MEASUREMENT.rst
diff --git a/share/cmake-3.6/Help/prop_test/PASS_REGULAR_EXPRESSION.rst b/share/cmake-3.6/Help/prop_test/PASS_REGULAR_EXPRESSION.rst
new file mode 100644
index 0000000..0cd6215
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_test/PASS_REGULAR_EXPRESSION.rst
@@ -0,0 +1,16 @@
+PASS_REGULAR_EXPRESSION
+-----------------------
+
+The output must match this regular expression for the test to pass.
+
+If set, the test output will be checked against the specified regular
+expressions and at least one of the regular expressions has to match,
+otherwise the test will fail.  Example:
+
+.. code-block:: cmake
+
+  set_tests_properties(mytest PROPERTIES
+    PASS_REGULAR_EXPRESSION "TestPassed;All ok"
+  )
+
+``PASS_REGULAR_EXPRESSION`` expects a list of regular expressions.
diff --git a/share/cmake-3.2/Help/prop_test/PROCESSORS.rst b/share/cmake-3.6/Help/prop_test/PROCESSORS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/PROCESSORS.rst
rename to share/cmake-3.6/Help/prop_test/PROCESSORS.rst
diff --git a/share/cmake-3.2/Help/prop_test/REQUIRED_FILES.rst b/share/cmake-3.6/Help/prop_test/REQUIRED_FILES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/REQUIRED_FILES.rst
rename to share/cmake-3.6/Help/prop_test/REQUIRED_FILES.rst
diff --git a/share/cmake-3.2/Help/prop_test/RESOURCE_LOCK.rst b/share/cmake-3.6/Help/prop_test/RESOURCE_LOCK.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/RESOURCE_LOCK.rst
rename to share/cmake-3.6/Help/prop_test/RESOURCE_LOCK.rst
diff --git a/share/cmake-3.2/Help/prop_test/RUN_SERIAL.rst b/share/cmake-3.6/Help/prop_test/RUN_SERIAL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/RUN_SERIAL.rst
rename to share/cmake-3.6/Help/prop_test/RUN_SERIAL.rst
diff --git a/share/cmake-3.2/Help/prop_test/SKIP_RETURN_CODE.rst b/share/cmake-3.6/Help/prop_test/SKIP_RETURN_CODE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/SKIP_RETURN_CODE.rst
rename to share/cmake-3.6/Help/prop_test/SKIP_RETURN_CODE.rst
diff --git a/share/cmake-3.2/Help/prop_test/TIMEOUT.rst b/share/cmake-3.6/Help/prop_test/TIMEOUT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/TIMEOUT.rst
rename to share/cmake-3.6/Help/prop_test/TIMEOUT.rst
diff --git a/share/cmake-3.6/Help/prop_test/TIMEOUT_AFTER_MATCH.rst b/share/cmake-3.6/Help/prop_test/TIMEOUT_AFTER_MATCH.rst
new file mode 100644
index 0000000..a191a9c
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_test/TIMEOUT_AFTER_MATCH.rst
@@ -0,0 +1,37 @@
+TIMEOUT_AFTER_MATCH
+-------------------
+
+Change a test's timeout duration after a matching line is encountered
+in its output.
+
+Usage
+^^^^^
+
+.. code-block:: cmake
+
+ add_test(mytest ...)
+ set_property(TEST mytest PROPERTY TIMEOUT_AFTER_MATCH "${seconds}" "${regex}")
+
+Description
+^^^^^^^^^^^
+
+Allow a test ``seconds`` to complete after ``regex`` is encountered in
+its output.
+
+When the test outputs a line that matches ``regex`` its start time is
+reset to the current time and its timeout duration is changed to
+``seconds``.  Prior to this, the timeout duration is determined by the
+:prop_test:`TIMEOUT` property or the :variable:`CTEST_TEST_TIMEOUT`
+variable if either of these are set.
+
+:prop_test:`TIMEOUT_AFTER_MATCH` is useful for avoiding spurious
+timeouts when your test must wait for some system resource to become
+available before it can execute.  Set :prop_test:`TIMEOUT` to a longer
+duration that accounts for resource acquisition and use
+:prop_test:`TIMEOUT_AFTER_MATCH` to control how long the actual test
+is allowed to run.
+
+If the required resource can be controlled by CTest you should use
+:prop_test:`RESOURCE_LOCK` instead of :prop_test:`TIMEOUT_AFTER_MATCH`.
+This property should be used when only the test itself can determine
+when its required resources are available.
diff --git a/share/cmake-3.2/Help/prop_test/WILL_FAIL.rst b/share/cmake-3.6/Help/prop_test/WILL_FAIL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/WILL_FAIL.rst
rename to share/cmake-3.6/Help/prop_test/WILL_FAIL.rst
diff --git a/share/cmake-3.2/Help/prop_test/WORKING_DIRECTORY.rst b/share/cmake-3.6/Help/prop_test/WORKING_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_test/WORKING_DIRECTORY.rst
rename to share/cmake-3.6/Help/prop_test/WORKING_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/ALIASED_TARGET.rst b/share/cmake-3.6/Help/prop_tgt/ALIASED_TARGET.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/ALIASED_TARGET.rst
rename to share/cmake-3.6/Help/prop_tgt/ALIASED_TARGET.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_ANT_ADDITIONAL_OPTIONS.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_ANT_ADDITIONAL_OPTIONS.rst
new file mode 100644
index 0000000..af6b405
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_ANT_ADDITIONAL_OPTIONS.rst
@@ -0,0 +1,8 @@
+ANDROID_ANT_ADDITIONAL_OPTIONS
+------------------------------
+
+Set the additional options for Android Ant build system. This is
+a string value containing all command line options for the Ant build.
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS` variable if it is
+set when a target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/ANDROID_API.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_API.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/ANDROID_API.rst
rename to share/cmake-3.6/Help/prop_tgt/ANDROID_API.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/ANDROID_API_MIN.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_API_MIN.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/ANDROID_API_MIN.rst
rename to share/cmake-3.6/Help/prop_tgt/ANDROID_API_MIN.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_ARCH.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_ARCH.rst
new file mode 100644
index 0000000..5477fb5
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_ARCH.rst
@@ -0,0 +1,17 @@
+ANDROID_ARCH
+------------
+
+Set the Android target architecture.
+
+This is a string property that could be set to the one of
+the following values:
+
+* ``armv7-a``: "ARMv7-A (armv7-a)"
+* ``armv7-a-hard``: "ARMv7-A, hard-float ABI (armv7-a)"
+* ``arm64-v8a``: "ARMv8-A, 64bit (arm64-v8a)"
+* ``x86``: "x86 (x86)"
+* ``x86_64``: "x86_64 (x86_64)"
+
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_ARCH` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_ASSETS_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_ASSETS_DIRECTORIES.rst
new file mode 100644
index 0000000..764a582
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_ASSETS_DIRECTORIES.rst
@@ -0,0 +1,9 @@
+ANDROID_ASSETS_DIRECTORIES
+--------------------------
+
+Set the Android assets directories to copy into the main assets
+folder before build. This a string property that contains the
+directory paths separated by semicolon.
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_ASSETS_DIRECTORIES` variable if it is set when
+a target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/ANDROID_GUI.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_GUI.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/ANDROID_GUI.rst
rename to share/cmake-3.6/Help/prop_tgt/ANDROID_GUI.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_JAR_DEPENDENCIES.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_JAR_DEPENDENCIES.rst
new file mode 100644
index 0000000..42937c1
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_JAR_DEPENDENCIES.rst
@@ -0,0 +1,7 @@
+ANDROID_JAR_DEPENDENCIES
+------------------------
+
+Set the Android property that specifies JAR dependencies.
+This is a string value property. This property is initialized
+by the value of the :variable:`CMAKE_ANDROID_JAR_DEPENDENCIES`
+variable if it is set when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_JAR_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_JAR_DIRECTORIES.rst
new file mode 100644
index 0000000..54f0a8f
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_JAR_DIRECTORIES.rst
@@ -0,0 +1,14 @@
+ANDROID_JAR_DIRECTORIES
+-----------------------
+
+Set the Android property that specifies directories to search for
+the JAR libraries.
+
+This a string property that contains the directory paths separated by
+semicolons. This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_JAR_DIRECTORIES` variable if it is set when
+a target is created.
+
+Contents of ``ANDROID_JAR_DIRECTORIES`` may use "generator expressions"
+with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_JAVA_SOURCE_DIR.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_JAVA_SOURCE_DIR.rst
new file mode 100644
index 0000000..90ef1ce
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_JAVA_SOURCE_DIR.rst
@@ -0,0 +1,8 @@
+ANDROID_JAVA_SOURCE_DIR
+-----------------------
+
+Set the Android property that defines the Java source code root directories.
+This a string property that contains the directory paths separated by semicolon.
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_JAVA_SOURCE_DIR` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_NATIVE_LIB_DEPENDENCIES.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_NATIVE_LIB_DEPENDENCIES.rst
new file mode 100644
index 0000000..759a37b
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_NATIVE_LIB_DEPENDENCIES.rst
@@ -0,0 +1,14 @@
+ANDROID_NATIVE_LIB_DEPENDENCIES
+-------------------------------
+
+Set the Android property that specifies the .so dependencies.
+This is a string property.
+
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES` variable if it is set
+when a target is created.
+
+Contents of ``ANDROID_NATIVE_LIB_DEPENDENCIES`` may use
+"generator expressions" with the syntax ``$<...>``. See the
+:manual:`cmake-generator-expressions(7)` manual for
+available expressions.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_NATIVE_LIB_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_NATIVE_LIB_DIRECTORIES.rst
new file mode 100644
index 0000000..bc67380
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_NATIVE_LIB_DIRECTORIES.rst
@@ -0,0 +1,16 @@
+ANDROID_NATIVE_LIB_DIRECTORIES
+------------------------------
+
+Set the Android property that specifies directories to search for the
+.so libraries.
+
+This a string property that contains the directory paths separated
+by semicolons.
+
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES` variable if it is set when a
+target is created.
+
+Contents of ``ANDROID_NATIVE_LIB_DIRECTORIES`` may use "generator expressions"
+with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_PROCESS_MAX.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_PROCESS_MAX.rst
new file mode 100644
index 0000000..847acae
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_PROCESS_MAX.rst
@@ -0,0 +1,8 @@
+ANDROID_PROCESS_MAX
+-------------------
+
+Set the Android property that defines the maximum number of a
+parallel Android NDK compiler processes (e.g. ``4``).
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_PROCESS_MAX` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_PROGUARD.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_PROGUARD.rst
new file mode 100644
index 0000000..dafc51e
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_PROGUARD.rst
@@ -0,0 +1,9 @@
+ANDROID_PROGUARD
+----------------
+
+When this property is set to true that enables the ProGuard tool to shrink,
+optimize, and obfuscate the code by removing unused code and renaming
+classes, fields, and methods with semantically obscure names.
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_PROGUARD` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_PROGUARD_CONFIG_PATH.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_PROGUARD_CONFIG_PATH.rst
new file mode 100644
index 0000000..0e929d1
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_PROGUARD_CONFIG_PATH.rst
@@ -0,0 +1,9 @@
+ANDROID_PROGUARD_CONFIG_PATH
+----------------------------
+
+Set the Android property that specifies the location of the ProGuard
+config file. Leave empty to use the default one.
+This a string property that contains the path to ProGuard config file.
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_PROGUARD_CONFIG_PATH` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_SECURE_PROPS_PATH.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_SECURE_PROPS_PATH.rst
new file mode 100644
index 0000000..9533f1a
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_SECURE_PROPS_PATH.rst
@@ -0,0 +1,8 @@
+ANDROID_SECURE_PROPS_PATH
+-------------------------
+
+Set the Android property that states the location of the secure properties file.
+This is a string property that contains the file path.
+This property is initialized by the value of the
+:variable:`CMAKE_ANDROID_SECURE_PROPS_PATH` variable
+if it is set when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_SKIP_ANT_STEP.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_SKIP_ANT_STEP.rst
new file mode 100644
index 0000000..6361896
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_SKIP_ANT_STEP.rst
@@ -0,0 +1,6 @@
+ANDROID_SKIP_ANT_STEP
+---------------------
+
+Set the Android property that defines whether or not to skip the Ant build step.
+This is a boolean property initialized by the value of the
+:variable:`CMAKE_ANDROID_SKIP_ANT_STEP` variable if it is set when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ANDROID_STL_TYPE.rst b/share/cmake-3.6/Help/prop_tgt/ANDROID_STL_TYPE.rst
new file mode 100644
index 0000000..7256e26
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ANDROID_STL_TYPE.rst
@@ -0,0 +1,15 @@
+ANDROID_STL_TYPE
+----------------
+
+Set the Android property that defines the type of STL support for the project.
+This is a string property that could set to the one of the following values:
+``none``           e.g. "No C++ Support"
+``system``         e.g. "Minimal C++ without STL"
+``gabi++_static``  e.g. "GAbi++ Static"
+``gabi++_shared``  e.g. "GAbi++ Shared"
+``gnustl_static``  e.g. "GNU libstdc++ Static"
+``gnustl_shared``  e.g. "GNU libstdc++ Shared"
+``stlport_static`` e.g. "STLport Static"
+``stlport_shared`` e.g. "STLport Shared"
+This property is initialized by the value of the
+variable:`CMAKE_ANDROID_STL_TYPE` variable if it is set when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY.rst
new file mode 100644
index 0000000..4221069
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY.rst
@@ -0,0 +1,9 @@
+ARCHIVE_OUTPUT_DIRECTORY
+------------------------
+
+.. |XXX| replace:: :ref:`ARCHIVE <Archive Output Artifacts>`
+.. |xxx| replace:: archive
+.. |CMAKE_XXX_OUTPUT_DIRECTORY| replace:: CMAKE_ARCHIVE_OUTPUT_DIRECTORY
+.. include:: XXX_OUTPUT_DIRECTORY.txt
+
+See also the :prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>` target property.
diff --git a/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst
new file mode 100644
index 0000000..12f8bb7
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst
@@ -0,0 +1,16 @@
+ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
+---------------------------------
+
+Per-configuration output directory for
+:ref:`ARCHIVE <Archive Output Artifacts>` target files.
+
+This is a per-configuration version of the
+:prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY` target property, but
+multi-configuration generators (VS, Xcode) do NOT append a
+per-configuration subdirectory to the specified directory.  This
+property is initialized by the value of the
+:variable:`CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>` variable if
+it is set when a target is created.
+
+Contents of ``ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>`` may use
+:manual:`generator expressions <cmake-generator-expressions(7)>`.
diff --git a/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_NAME.rst b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_NAME.rst
new file mode 100644
index 0000000..6150193
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_NAME.rst
@@ -0,0 +1,8 @@
+ARCHIVE_OUTPUT_NAME
+-------------------
+
+.. |XXX| replace:: :ref:`ARCHIVE <Archive Output Artifacts>`
+.. |xxx| replace:: archive
+.. include:: XXX_OUTPUT_NAME.txt
+
+See also the :prop_tgt:`ARCHIVE_OUTPUT_NAME_<CONFIG>` target property.
diff --git a/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG.rst
new file mode 100644
index 0000000..4f62eb9
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ARCHIVE_OUTPUT_NAME_CONFIG.rst
@@ -0,0 +1,8 @@
+ARCHIVE_OUTPUT_NAME_<CONFIG>
+----------------------------
+
+Per-configuration output name for
+:ref:`ARCHIVE <Archive Output Artifacts>` target files.
+
+This is the configuration-specific version of the
+:prop_tgt:`ARCHIVE_OUTPUT_NAME` target property.
diff --git a/share/cmake-3.2/Help/prop_tgt/AUTOGEN_TARGET_DEPENDS.rst b/share/cmake-3.6/Help/prop_tgt/AUTOGEN_TARGET_DEPENDS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/AUTOGEN_TARGET_DEPENDS.rst
rename to share/cmake-3.6/Help/prop_tgt/AUTOGEN_TARGET_DEPENDS.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/AUTOMOC.rst b/share/cmake-3.6/Help/prop_tgt/AUTOMOC.rst
new file mode 100644
index 0000000..8143ba9
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/AUTOMOC.rst
@@ -0,0 +1,50 @@
+AUTOMOC
+-------
+
+Should the target be processed with automoc (for Qt projects).
+
+AUTOMOC is a boolean specifying whether CMake will handle the Qt ``moc``
+preprocessor automatically, i.e.  without having to use the
+:module:`QT4_WRAP_CPP() <FindQt4>` or QT5_WRAP_CPP() macro.  Currently Qt4 and Qt5 are
+supported.
+
+When this property is set ``ON``, CMake will scan the
+source files at build time and invoke moc accordingly.
+
+* If an ``#include`` statement like ``#include "moc_foo.cpp"`` is found,
+  the ``Q_OBJECT`` class declaration is expected in the header, and
+  ``moc`` is run on the header file.  A ``moc_foo.cpp`` file will be
+  generated from the source's header into the
+  :variable:`CMAKE_CURRENT_BINARY_DIR` directory.  This allows the
+  compiler to find the included ``moc_foo.cpp`` file regardless of the
+  location the original source.  However, if multiple source files
+  in different directories do this then their generated moc files would
+  collide.  In this case a diagnostic will be issued.
+
+* If an ``#include`` statement like ``#include "foo.moc"`` is found,
+  then a ``Q_OBJECT`` is expected in the current source file and ``moc``
+  is run on the file itself.  Additionally, header files with the same
+  base name (like ``foo.h``) or ``_p`` appended to the base name (like
+  ``foo_p.h``) are parsed for ``Q_OBJECT`` macros, and if found, ``moc``
+  is also executed on those files.  ``AUTOMOC`` checks multiple header
+  alternative extensions, such as ``hpp``, ``hxx`` etc when searching
+  for headers.  The resulting moc files, which are not included as shown
+  above in any of the source files are included in a generated
+  ``<targetname>_automoc.cpp`` file, which is compiled as part of the
+  target.
+
+This property is initialized by the value of the :variable:`CMAKE_AUTOMOC`
+variable if it is set when a target is created.
+
+Additional command line options for moc can be set via the
+:prop_tgt:`AUTOMOC_MOC_OPTIONS` property.
+
+By enabling the :variable:`CMAKE_AUTOMOC_RELAXED_MODE` variable the
+rules for searching the files which will be processed by moc can be relaxed.
+See the documentation for this variable for more details.
+
+The global property :prop_gbl:`AUTOGEN_TARGETS_FOLDER` can be used to group the
+automoc targets together in an IDE, e.g.  in MSVS.
+
+See the :manual:`cmake-qt(7)` manual for more information on using CMake
+with Qt.
diff --git a/share/cmake-3.2/Help/prop_tgt/AUTOMOC_MOC_OPTIONS.rst b/share/cmake-3.6/Help/prop_tgt/AUTOMOC_MOC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/AUTOMOC_MOC_OPTIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/AUTOMOC_MOC_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/AUTORCC.rst b/share/cmake-3.6/Help/prop_tgt/AUTORCC.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/AUTORCC.rst
rename to share/cmake-3.6/Help/prop_tgt/AUTORCC.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/AUTORCC_OPTIONS.rst b/share/cmake-3.6/Help/prop_tgt/AUTORCC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/AUTORCC_OPTIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/AUTORCC_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/AUTOUIC.rst b/share/cmake-3.6/Help/prop_tgt/AUTOUIC.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/AUTOUIC.rst
rename to share/cmake-3.6/Help/prop_tgt/AUTOUIC.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/AUTOUIC_OPTIONS.rst b/share/cmake-3.6/Help/prop_tgt/AUTOUIC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/AUTOUIC_OPTIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/AUTOUIC_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/BINARY_DIR.rst b/share/cmake-3.6/Help/prop_tgt/BINARY_DIR.rst
new file mode 100644
index 0000000..246f7e6
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/BINARY_DIR.rst
@@ -0,0 +1,6 @@
+BINARY_DIR
+----------
+
+This read-only property reports the value of the
+:variable:`CMAKE_CURRENT_BINARY_DIR` variable in the directory in which
+the target was defined.
diff --git a/share/cmake-3.2/Help/prop_tgt/BUILD_WITH_INSTALL_RPATH.rst b/share/cmake-3.6/Help/prop_tgt/BUILD_WITH_INSTALL_RPATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/BUILD_WITH_INSTALL_RPATH.rst
rename to share/cmake-3.6/Help/prop_tgt/BUILD_WITH_INSTALL_RPATH.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/BUNDLE.rst b/share/cmake-3.6/Help/prop_tgt/BUNDLE.rst
new file mode 100644
index 0000000..075f017
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/BUNDLE.rst
@@ -0,0 +1,9 @@
+BUNDLE
+------
+
+This target is a ``CFBundle`` on the OS X.
+
+If a module library target has this property set to true it will be
+built as a ``CFBundle`` when built on the mac.  It will have the directory
+structure required for a ``CFBundle`` and will be suitable to be used for
+creating Browser Plugins or other application resources.
diff --git a/share/cmake-3.6/Help/prop_tgt/BUNDLE_EXTENSION.rst b/share/cmake-3.6/Help/prop_tgt/BUNDLE_EXTENSION.rst
new file mode 100644
index 0000000..ea265b3
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/BUNDLE_EXTENSION.rst
@@ -0,0 +1,7 @@
+BUNDLE_EXTENSION
+----------------
+
+The file extension used to name a :prop_tgt:`BUNDLE` target on the OS X and iOS.
+
+The default value is ``bundle`` - you can also use ``plugin`` or whatever
+file extension is required by the host app for your bundle.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_BOOL.rst b/share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_BOOL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_BOOL.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_BOOL.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MAX.rst b/share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MAX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MAX.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MAX.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MIN.rst b/share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MIN.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MIN.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_NUMBER_MIN.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_STRING.rst b/share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_STRING.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPATIBLE_INTERFACE_STRING.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPATIBLE_INTERFACE_STRING.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/COMPILE_DEFINITIONS.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_DEFINITIONS.rst
new file mode 100644
index 0000000..059f913
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/COMPILE_DEFINITIONS.rst
@@ -0,0 +1,25 @@
+COMPILE_DEFINITIONS
+-------------------
+
+Preprocessor definitions for compiling a target's sources.
+
+The ``COMPILE_DEFINITIONS`` property may be set to a semicolon-separated
+list of preprocessor definitions using the syntax ``VAR`` or ``VAR=value``.
+Function-style definitions are not supported.  CMake will
+automatically escape the value correctly for the native build system
+(note that CMake language syntax may require escapes to specify some
+values).
+
+CMake will automatically drop some definitions that are not supported
+by the native build tool.
+
+.. include:: /include/COMPILE_DEFINITIONS_DISCLAIMER.txt
+
+Contents of ``COMPILE_DEFINITIONS`` may use "generator expressions" with the
+syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual
+for available expressions.  See the :manual:`cmake-buildsystem(7)` manual
+for more on defining buildsystem properties.
+
+The corresponding :prop_tgt:`COMPILE_DEFINITIONS_<CONFIG>` property may
+be set to specify per-configuration definitions.  Generator expressions
+should be preferred instead of setting the alternative property.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_DEFINITIONS_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_DEFINITIONS_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPILE_DEFINITIONS_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPILE_DEFINITIONS_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/COMPILE_FEATURES.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_FEATURES.rst
new file mode 100644
index 0000000..195215e
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/COMPILE_FEATURES.rst
@@ -0,0 +1,12 @@
+COMPILE_FEATURES
+----------------
+
+Compiler features enabled for this target.
+
+The list of features in this property are a subset of the features listed
+in the :variable:`CMAKE_CXX_COMPILE_FEATURES` variable.
+
+Contents of ``COMPILE_FEATURES`` may use "generator expressions" with the
+syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual for
+available expressions.  See the :manual:`cmake-compile-features(7)` manual
+for information on compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/prop_tgt/COMPILE_FLAGS.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_FLAGS.rst
new file mode 100644
index 0000000..1a5389e
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/COMPILE_FLAGS.rst
@@ -0,0 +1,11 @@
+COMPILE_FLAGS
+-------------
+
+Additional flags to use when compiling this target's sources.
+
+The ``COMPILE_FLAGS`` property sets additional compiler flags used to
+build sources within the target.  Use :prop_tgt:`COMPILE_DEFINITIONS`
+to pass additional preprocessor definitions.
+
+This property is deprecated.  Use the :prop_tgt:`COMPILE_OPTIONS`
+property or the command:`target_compile_options` command instead.
diff --git a/share/cmake-3.6/Help/prop_tgt/COMPILE_OPTIONS.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_OPTIONS.rst
new file mode 100644
index 0000000..892ac23
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/COMPILE_OPTIONS.rst
@@ -0,0 +1,17 @@
+COMPILE_OPTIONS
+---------------
+
+List of options to pass to the compiler.
+
+This property holds a :ref:`;-list <CMake Language Lists>` of options
+specified so far for its target.  Use the :command:`target_compile_options`
+command to append more options.
+
+This property is initialized by the :prop_dir:`COMPILE_OPTIONS` directory
+property when a target is created, and is used by the generators to set
+the options for the compiler.
+
+Contents of ``COMPILE_OPTIONS`` may use "generator expressions" with the
+syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)` manual
+for available expressions.  See the :manual:`cmake-buildsystem(7)` manual
+for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_NAME.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_NAME.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_NAME.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_NAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_NAME_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_NAME_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_NAME_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_NOTE.txt b/share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_NOTE.txt
new file mode 100644
index 0000000..43003d9
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_NOTE.txt
@@ -0,0 +1,5 @@
+.. note::
+ The compiler-generated program database files are specified by the
+ ``/Fd`` compiler flag and are not the same as linker-generated
+ program database files specified by the ``/pdb`` linker flag.
+ Use the |PDB_XXX| property to specify the latter.
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/CONFIG_OUTPUT_NAME.rst b/share/cmake-3.6/Help/prop_tgt/CONFIG_OUTPUT_NAME.rst
new file mode 100644
index 0000000..a61c702
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/CONFIG_OUTPUT_NAME.rst
@@ -0,0 +1,8 @@
+<CONFIG>_OUTPUT_NAME
+--------------------
+
+Old per-configuration target file base name.
+Use :prop_tgt:`OUTPUT_NAME_<CONFIG>` instead.
+
+This is a configuration-specific version of the :prop_tgt:`OUTPUT_NAME`
+target property.
diff --git a/share/cmake-3.2/Help/prop_tgt/CONFIG_POSTFIX.rst b/share/cmake-3.6/Help/prop_tgt/CONFIG_POSTFIX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/CONFIG_POSTFIX.rst
rename to share/cmake-3.6/Help/prop_tgt/CONFIG_POSTFIX.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/CROSSCOMPILING_EMULATOR.rst b/share/cmake-3.6/Help/prop_tgt/CROSSCOMPILING_EMULATOR.rst
new file mode 100644
index 0000000..d30a2f2
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/CROSSCOMPILING_EMULATOR.rst
@@ -0,0 +1,7 @@
+CROSSCOMPILING_EMULATOR
+-----------------------
+
+Use the given emulator to run executables created when crosscompiling.
+This command will be added as a prefix to :command:`add_test`,
+:command:`add_custom_command`, and :command:`add_custom_target` commands
+for built target system executables.
diff --git a/share/cmake-3.6/Help/prop_tgt/CXX_EXTENSIONS.rst b/share/cmake-3.6/Help/prop_tgt/CXX_EXTENSIONS.rst
new file mode 100644
index 0000000..0f547e2
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/CXX_EXTENSIONS.rst
@@ -0,0 +1,16 @@
+CXX_EXTENSIONS
+--------------
+
+Boolean specifying whether compiler specific extensions are requested.
+
+This property specifies whether compiler specific extensions should be
+used.  For some compilers, this results in adding a flag such
+as ``-std=gnu++11`` instead of ``-std=c++11`` to the compile line.  This
+property is ``ON`` by default.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+This property is initialized by the value of
+the :variable:`CMAKE_CXX_EXTENSIONS` variable if it is set when a target
+is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/CXX_STANDARD.rst b/share/cmake-3.6/Help/prop_tgt/CXX_STANDARD.rst
new file mode 100644
index 0000000..edc9ba5
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/CXX_STANDARD.rst
@@ -0,0 +1,31 @@
+CXX_STANDARD
+------------
+
+The C++ standard whose features are requested to build this target.
+
+This property specifies the C++ standard whose features are requested
+to build this target.  For some compilers, this results in adding a
+flag such as ``-std=gnu++11`` to the compile line.  For compilers that
+have no notion of a standard level, such as MSVC, this has no effect.
+
+Supported values are ``98``, ``11`` and ``14``.
+
+If the value requested does not result in a compile flag being added for
+the compiler in use, a previous standard flag will be added instead.  This
+means that using:
+
+.. code-block:: cmake
+
+  set_property(TARGET tgt PROPERTY CXX_STANDARD 11)
+
+with a compiler which does not support ``-std=gnu++11`` or an equivalent
+flag will not result in an error or warning, but will instead add the
+``-std=gnu++98`` flag if supported.  This "decay" behavior may be controlled
+with the :prop_tgt:`CXX_STANDARD_REQUIRED` target property.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+This property is initialized by the value of
+the :variable:`CMAKE_CXX_STANDARD` variable if it is set when a target
+is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/CXX_STANDARD_REQUIRED.rst b/share/cmake-3.6/Help/prop_tgt/CXX_STANDARD_REQUIRED.rst
new file mode 100644
index 0000000..697d7f6
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/CXX_STANDARD_REQUIRED.rst
@@ -0,0 +1,18 @@
+CXX_STANDARD_REQUIRED
+---------------------
+
+Boolean describing whether the value of :prop_tgt:`CXX_STANDARD` is a requirement.
+
+If this property is set to ``ON``, then the value of the
+:prop_tgt:`CXX_STANDARD` target property is treated as a requirement.  If this
+property is ``OFF`` or unset, the :prop_tgt:`CXX_STANDARD` target property is
+treated as optional and may "decay" to a previous standard if the requested is
+not available.  For compilers that have no notion of a standard level, such as
+MSVC, this has no effect.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+This property is initialized by the value of
+the :variable:`CMAKE_CXX_STANDARD_REQUIRED` variable if it is set when a
+target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/C_EXTENSIONS.rst b/share/cmake-3.6/Help/prop_tgt/C_EXTENSIONS.rst
new file mode 100644
index 0000000..fce67f4
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/C_EXTENSIONS.rst
@@ -0,0 +1,16 @@
+C_EXTENSIONS
+------------
+
+Boolean specifying whether compiler specific extensions are requested.
+
+This property specifies whether compiler specific extensions should be
+used.  For some compilers, this results in adding a flag such
+as ``-std=gnu11`` instead of ``-std=c11`` to the compile line.  This
+property is ``ON`` by default.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+This property is initialized by the value of
+the :variable:`CMAKE_C_EXTENSIONS` variable if it is set when a target
+is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/C_STANDARD.rst b/share/cmake-3.6/Help/prop_tgt/C_STANDARD.rst
new file mode 100644
index 0000000..5e36821
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/C_STANDARD.rst
@@ -0,0 +1,31 @@
+C_STANDARD
+----------
+
+The C standard whose features are requested to build this target.
+
+This property specifies the C standard whose features are requested
+to build this target.  For some compilers, this results in adding a
+flag such as ``-std=gnu11`` to the compile line.  For compilers that
+have no notion of a standard level, such as MSVC, this has no effect.
+
+Supported values are ``90``, ``99`` and ``11``.
+
+If the value requested does not result in a compile flag being added for
+the compiler in use, a previous standard flag will be added instead.  This
+means that using:
+
+.. code-block:: cmake
+
+  set_property(TARGET tgt PROPERTY C_STANDARD 11)
+
+with a compiler which does not support ``-std=gnu11`` or an equivalent
+flag will not result in an error or warning, but will instead add the
+``-std=gnu99`` or ``-std=gnu90`` flag if supported.  This "decay" behavior may
+be controlled with the :prop_tgt:`C_STANDARD_REQUIRED` target property.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+This property is initialized by the value of
+the :variable:`CMAKE_C_STANDARD` variable if it is set when a target
+is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/C_STANDARD_REQUIRED.rst b/share/cmake-3.6/Help/prop_tgt/C_STANDARD_REQUIRED.rst
new file mode 100644
index 0000000..acfad98
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/C_STANDARD_REQUIRED.rst
@@ -0,0 +1,18 @@
+C_STANDARD_REQUIRED
+-------------------
+
+Boolean describing whether the value of :prop_tgt:`C_STANDARD` is a requirement.
+
+If this property is set to ``ON``, then the value of the
+:prop_tgt:`C_STANDARD` target property is treated as a requirement.  If this
+property is ``OFF`` or unset, the :prop_tgt:`C_STANDARD` target property is
+treated as optional and may "decay" to a previous standard if the requested is
+not available.  For compilers that have no notion of a standard level, such as
+MSVC, this has no effect.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
+
+This property is initialized by the value of
+the :variable:`CMAKE_C_STANDARD_REQUIRED` variable if it is set when a
+target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/DEBUG_POSTFIX.rst b/share/cmake-3.6/Help/prop_tgt/DEBUG_POSTFIX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/DEBUG_POSTFIX.rst
rename to share/cmake-3.6/Help/prop_tgt/DEBUG_POSTFIX.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/DEFINE_SYMBOL.rst b/share/cmake-3.6/Help/prop_tgt/DEFINE_SYMBOL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/DEFINE_SYMBOL.rst
rename to share/cmake-3.6/Help/prop_tgt/DEFINE_SYMBOL.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/DEPLOYMENT_REMOTE_DIRECTORY.rst b/share/cmake-3.6/Help/prop_tgt/DEPLOYMENT_REMOTE_DIRECTORY.rst
new file mode 100644
index 0000000..1ff5bf0
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/DEPLOYMENT_REMOTE_DIRECTORY.rst
@@ -0,0 +1,18 @@
+DEPLOYMENT_REMOTE_DIRECTORY
+---------------------------
+
+Set the WinCE project ``RemoteDirectory`` in ``DeploymentTool`` and
+``RemoteExecutable`` in ``DebuggerTool`` in ``.vcproj`` files generated
+by the :generator:`Visual Studio 9 2008` and :generator:`Visual Studio 8 2005`
+generators.  This is useful when you want to debug on remote WinCE device.
+For example:
+
+.. code-block:: cmake
+
+  set_property(TARGET ${TARGET} PROPERTY
+    DEPLOYMENT_REMOTE_DIRECTORY "\\FlashStorage")
+
+produces::
+
+  <DeploymentTool RemoteDirectory="\FlashStorage" ... />
+  <DebuggerTool RemoteExecutable="\FlashStorage\target_file" ... />
diff --git a/share/cmake-3.6/Help/prop_tgt/ENABLE_EXPORTS.rst b/share/cmake-3.6/Help/prop_tgt/ENABLE_EXPORTS.rst
new file mode 100644
index 0000000..9e22309
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/ENABLE_EXPORTS.rst
@@ -0,0 +1,22 @@
+ENABLE_EXPORTS
+--------------
+
+Specify whether an executable exports symbols for loadable modules.
+
+Normally an executable does not export any symbols because it is the
+final program.  It is possible for an executable to export symbols to
+be used by loadable modules.  When this property is set to true CMake
+will allow other targets to "link" to the executable with the
+:command:`TARGET_LINK_LIBRARIES` command.  On all platforms a target-level
+dependency on the executable is created for targets that link to it.
+For DLL platforms an import library will be created for the exported
+symbols and then used for linking.  All Windows-based systems
+including Cygwin are DLL platforms.  For non-DLL platforms that
+require all symbols to be resolved at link time, such as OS X, the
+module will "link" to the executable using a flag like
+``-bundle_loader``.  For other non-DLL platforms the link rule is simply
+ignored since the dynamic loader will automatically bind symbols when
+the module is loaded.
+
+This property is initialized by the value of the variable
+:variable:`CMAKE_ENABLE_EXPORTS` if it is set when a target is created.
diff --git a/share/cmake-3.2/Help/prop_tgt/EXCLUDE_FROM_ALL.rst b/share/cmake-3.6/Help/prop_tgt/EXCLUDE_FROM_ALL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/EXCLUDE_FROM_ALL.rst
rename to share/cmake-3.6/Help/prop_tgt/EXCLUDE_FROM_ALL.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD.rst b/share/cmake-3.6/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD.rst
rename to share/cmake-3.6/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/EXCLUDE_FROM_DEFAULT_BUILD_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/EXPORT_NAME.rst b/share/cmake-3.6/Help/prop_tgt/EXPORT_NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/EXPORT_NAME.rst
rename to share/cmake-3.6/Help/prop_tgt/EXPORT_NAME.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/EchoString.rst b/share/cmake-3.6/Help/prop_tgt/EchoString.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/EchoString.rst
rename to share/cmake-3.6/Help/prop_tgt/EchoString.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/FOLDER.rst b/share/cmake-3.6/Help/prop_tgt/FOLDER.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/FOLDER.rst
rename to share/cmake-3.6/Help/prop_tgt/FOLDER.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/FRAMEWORK.rst b/share/cmake-3.6/Help/prop_tgt/FRAMEWORK.rst
new file mode 100644
index 0000000..6c212c3
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/FRAMEWORK.rst
@@ -0,0 +1,31 @@
+FRAMEWORK
+---------
+
+Build ``SHARED`` library as Framework Bundle on the OS X and iOS.
+
+If a ``SHARED`` library target has this property set to ``TRUE`` it will be
+built as a framework when built on the OS X and iOS.  It will have the
+directory structure required for a framework and will be suitable to
+be used with the ``-framework`` option
+
+To customize ``Info.plist`` file in the framework, use
+:prop_tgt:`MACOSX_FRAMEWORK_INFO_PLIST` target property.
+
+For OS X see also the :prop_tgt:`FRAMEWORK_VERSION` target property.
+
+Example of creation ``dynamicFramework``:
+
+.. code-block:: cmake
+
+  add_library(dynamicFramework SHARED
+              dynamicFramework.c
+              dynamicFramework.h
+  )
+  set_target_properties(dynamicFramework PROPERTIES
+    FRAMEWORK TRUE
+    FRAMEWORK_VERSION C
+    MACOSX_FRAMEWORK_IDENTIFIER com.cmake.dynamicFramework
+    MACOSX_FRAMEWORK_INFO_PLIST Info.plist
+    PUBLIC_HEADER dynamicFramework.h
+    XCODE_ATTRIBUTE_CODE_SIGN_IDENTITY "iPhone Developer"
+  )
diff --git a/share/cmake-3.6/Help/prop_tgt/FRAMEWORK_VERSION.rst b/share/cmake-3.6/Help/prop_tgt/FRAMEWORK_VERSION.rst
new file mode 100644
index 0000000..6aa3026
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/FRAMEWORK_VERSION.rst
@@ -0,0 +1,8 @@
+FRAMEWORK_VERSION
+-----------------
+
+Version of a framework created using the :prop_tgt:`FRAMEWORK` target
+property (e.g. ``A``).
+
+This property only affects OS X, as iOS doesn't have versioned
+directory structure.
diff --git a/share/cmake-3.2/Help/prop_tgt/Fortran_FORMAT.rst b/share/cmake-3.6/Help/prop_tgt/Fortran_FORMAT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/Fortran_FORMAT.rst
rename to share/cmake-3.6/Help/prop_tgt/Fortran_FORMAT.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/Fortran_MODULE_DIRECTORY.rst b/share/cmake-3.6/Help/prop_tgt/Fortran_MODULE_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/Fortran_MODULE_DIRECTORY.rst
rename to share/cmake-3.6/Help/prop_tgt/Fortran_MODULE_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/GENERATOR_FILE_NAME.rst b/share/cmake-3.6/Help/prop_tgt/GENERATOR_FILE_NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/GENERATOR_FILE_NAME.rst
rename to share/cmake-3.6/Help/prop_tgt/GENERATOR_FILE_NAME.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/GNUtoMS.rst b/share/cmake-3.6/Help/prop_tgt/GNUtoMS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/GNUtoMS.rst
rename to share/cmake-3.6/Help/prop_tgt/GNUtoMS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/HAS_CXX.rst b/share/cmake-3.6/Help/prop_tgt/HAS_CXX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/HAS_CXX.rst
rename to share/cmake-3.6/Help/prop_tgt/HAS_CXX.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst b/share/cmake-3.6/Help/prop_tgt/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPLICIT_DEPENDS_INCLUDE_TRANSFORM.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_CONFIGURATIONS.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_CONFIGURATIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_CONFIGURATIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_CONFIGURATIONS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_IMPLIB.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_IMPLIB.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_IMPLIB.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_IMPLIB.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_IMPLIB_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_IMPLIB_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_IMPLIB_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_IMPLIB_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_DEPENDENT_LIBRARIES_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LANGUAGES_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_LIBRARIES_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LINK_INTERFACE_MULTIPLICITY_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LOCATION.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LOCATION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LOCATION.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LOCATION.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_LOCATION_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_LOCATION_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_LOCATION_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_LOCATION_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_NO_SONAME.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_NO_SONAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_NO_SONAME.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_NO_SONAME.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_NO_SONAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_NO_SONAME_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_NO_SONAME_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_NO_SONAME_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_SONAME.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_SONAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_SONAME.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_SONAME.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORTED_SONAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/IMPORTED_SONAME_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORTED_SONAME_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORTED_SONAME_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORT_PREFIX.rst b/share/cmake-3.6/Help/prop_tgt/IMPORT_PREFIX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORT_PREFIX.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORT_PREFIX.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/IMPORT_SUFFIX.rst b/share/cmake-3.6/Help/prop_tgt/IMPORT_SUFFIX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/IMPORT_SUFFIX.rst
rename to share/cmake-3.6/Help/prop_tgt/IMPORT_SUFFIX.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INCLUDE_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_tgt/INCLUDE_DIRECTORIES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INCLUDE_DIRECTORIES.rst
rename to share/cmake-3.6/Help/prop_tgt/INCLUDE_DIRECTORIES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INSTALL_NAME_DIR.rst b/share/cmake-3.6/Help/prop_tgt/INSTALL_NAME_DIR.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INSTALL_NAME_DIR.rst
rename to share/cmake-3.6/Help/prop_tgt/INSTALL_NAME_DIR.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INSTALL_RPATH.rst b/share/cmake-3.6/Help/prop_tgt/INSTALL_RPATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INSTALL_RPATH.rst
rename to share/cmake-3.6/Help/prop_tgt/INSTALL_RPATH.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INSTALL_RPATH_USE_LINK_PATH.rst b/share/cmake-3.6/Help/prop_tgt/INSTALL_RPATH_USE_LINK_PATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INSTALL_RPATH_USE_LINK_PATH.rst
rename to share/cmake-3.6/Help/prop_tgt/INSTALL_RPATH_USE_LINK_PATH.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_AUTOUIC_OPTIONS.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_AUTOUIC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERFACE_AUTOUIC_OPTIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/INTERFACE_AUTOUIC_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_BUILD_PROPERTY.txt b/share/cmake-3.6/Help/prop_tgt/INTERFACE_BUILD_PROPERTY.txt
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERFACE_BUILD_PROPERTY.txt
rename to share/cmake-3.6/Help/prop_tgt/INTERFACE_BUILD_PROPERTY.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_COMPILE_DEFINITIONS.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_COMPILE_DEFINITIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERFACE_COMPILE_DEFINITIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/INTERFACE_COMPILE_DEFINITIONS.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/INTERFACE_COMPILE_FEATURES.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_COMPILE_FEATURES.rst
new file mode 100644
index 0000000..31b594f
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/INTERFACE_COMPILE_FEATURES.rst
@@ -0,0 +1,12 @@
+INTERFACE_COMPILE_FEATURES
+--------------------------
+
+.. |property_name| replace:: compile features
+.. |command_name| replace:: :command:`target_compile_features`
+.. |PROPERTY_INTERFACE_NAME| replace:: ``INTERFACE_COMPILE_FEATURES``
+.. |PROPERTY_LINK| replace:: :prop_tgt:`COMPILE_FEATURES`
+.. |PROPERTY_GENEX| replace:: ``$<TARGET_PROPERTY:foo,INTERFACE_COMPILE_FEATURES>``
+.. include:: INTERFACE_BUILD_PROPERTY.txt
+
+See the :manual:`cmake-compile-features(7)` manual for information on compile
+features and a list of supported compilers.
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_COMPILE_OPTIONS.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_COMPILE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERFACE_COMPILE_OPTIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/INTERFACE_COMPILE_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/INTERFACE_INCLUDE_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_INCLUDE_DIRECTORIES.rst
new file mode 100644
index 0000000..b1c40b2
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/INTERFACE_INCLUDE_DIRECTORIES.rst
@@ -0,0 +1,29 @@
+INTERFACE_INCLUDE_DIRECTORIES
+-----------------------------
+
+.. |property_name| replace:: include directories
+.. |command_name| replace:: :command:`target_include_directories`
+.. |PROPERTY_INTERFACE_NAME| replace:: ``INTERFACE_INCLUDE_DIRECTORIES``
+.. |PROPERTY_LINK| replace:: :prop_tgt:`INCLUDE_DIRECTORIES`
+.. |PROPERTY_GENEX| replace:: ``$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>``
+.. include:: INTERFACE_BUILD_PROPERTY.txt
+
+Include directories usage requirements commonly differ between the build-tree
+and the install-tree.  The ``BUILD_INTERFACE`` and ``INSTALL_INTERFACE``
+generator expressions can be used to describe separate usage requirements
+based on the usage location.  Relative paths are allowed within the
+``INSTALL_INTERFACE`` expression and are interpreted relative to the
+installation prefix.  For example:
+
+.. code-block:: cmake
+
+  target_include_directories(mylib INTERFACE
+    $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include/mylib>
+    $<INSTALL_INTERFACE:include/mylib>  # <prefix>/include/mylib
+  )
+
+Creating Relocatable Packages
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. |INTERFACE_PROPERTY_LINK| replace:: ``INTERFACE_INCLUDE_DIRECTORIES``
+.. include:: /include/INTERFACE_INCLUDE_DIRECTORIES_WARNING.txt
diff --git a/share/cmake-3.6/Help/prop_tgt/INTERFACE_LINK_LIBRARIES.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_LINK_LIBRARIES.rst
new file mode 100644
index 0000000..832d12b
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/INTERFACE_LINK_LIBRARIES.rst
@@ -0,0 +1,24 @@
+INTERFACE_LINK_LIBRARIES
+------------------------
+
+List public interface libraries for a library.
+
+This property contains the list of transitive link dependencies.  When
+the target is linked into another target using the
+:command:`target_link_libraries` command, the libraries listed (and
+recursively their link interface libraries) will be provided to the
+other target also.  This property is overridden by the
+:prop_tgt:`LINK_INTERFACE_LIBRARIES` or
+:prop_tgt:`LINK_INTERFACE_LIBRARIES_<CONFIG>` property if policy
+:policy:`CMP0022` is ``OLD`` or unset.
+
+Contents of ``INTERFACE_LINK_LIBRARIES`` may use "generator expressions"
+with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
+
+Creating Relocatable Packages
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. |INTERFACE_PROPERTY_LINK| replace:: ``INTERFACE_LINK_LIBRARIES``
+.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_POSITION_INDEPENDENT_CODE.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_POSITION_INDEPENDENT_CODE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERFACE_POSITION_INDEPENDENT_CODE.rst
rename to share/cmake-3.6/Help/prop_tgt/INTERFACE_POSITION_INDEPENDENT_CODE.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/INTERFACE_SOURCES.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_SOURCES.rst
new file mode 100644
index 0000000..a224b68
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/INTERFACE_SOURCES.rst
@@ -0,0 +1,18 @@
+INTERFACE_SOURCES
+-----------------
+
+List of interface sources to compile into consuming targets.
+
+Targets may populate this property to publish the sources
+for consuming targets to compile.  The :command:`target_sources` command
+populates this property with values given to the ``PUBLIC`` and
+``INTERFACE`` keywords.  Projects may also get and set the property directly.
+
+When target dependencies are specified using :command:`target_link_libraries`,
+CMake will read this property from all target dependencies to determine the
+sources of the consumer.
+
+Contents of ``INTERFACE_SOURCES`` may use "generator expressions"
+with the syntax ``$<...>``.  See the :manual:`cmake-generator-expressions(7)`
+manual for available expressions.  See the :manual:`cmake-buildsystem(7)`
+manual for more on defining buildsystem properties.
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERFACE_SYSTEM_INCLUDE_DIRECTORIES.rst b/share/cmake-3.6/Help/prop_tgt/INTERFACE_SYSTEM_INCLUDE_DIRECTORIES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERFACE_SYSTEM_INCLUDE_DIRECTORIES.rst
rename to share/cmake-3.6/Help/prop_tgt/INTERFACE_SYSTEM_INCLUDE_DIRECTORIES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION.rst b/share/cmake-3.6/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION.rst
rename to share/cmake-3.6/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/INTERPROCEDURAL_OPTIMIZATION_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/IOS_INSTALL_COMBINED.rst b/share/cmake-3.6/Help/prop_tgt/IOS_INSTALL_COMBINED.rst
new file mode 100644
index 0000000..59f67a7
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/IOS_INSTALL_COMBINED.rst
@@ -0,0 +1,11 @@
+IOS_INSTALL_COMBINED
+--------------------
+
+Build a combined (device and simulator) target when installing.
+
+When this property is set to set to false (which is the default) then it will
+either be built with the device SDK or the simulator SDK depending on the SDK
+set. But if this property is set to true then the target will at install time
+also be built for the corresponding SDK and combined into one library.
+
+This feature requires at least Xcode version 6.
diff --git a/share/cmake-3.2/Help/prop_tgt/JOB_POOL_COMPILE.rst b/share/cmake-3.6/Help/prop_tgt/JOB_POOL_COMPILE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/JOB_POOL_COMPILE.rst
rename to share/cmake-3.6/Help/prop_tgt/JOB_POOL_COMPILE.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/JOB_POOL_LINK.rst b/share/cmake-3.6/Help/prop_tgt/JOB_POOL_LINK.rst
new file mode 100644
index 0000000..6535333
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/JOB_POOL_LINK.rst
@@ -0,0 +1,16 @@
+JOB_POOL_LINK
+-------------
+
+Ninja only: Pool used for linking.
+
+The number of parallel link processes could be limited by defining
+pools with the global :prop_gbl:`JOB_POOLS`
+property and then specifying here the pool name.
+
+For instance:
+
+.. code-block:: cmake
+
+  set_property(TARGET myexe PROPERTY JOB_POOL_LINK two_jobs)
+
+This property is initialized by the value of :variable:`CMAKE_JOB_POOL_LINK`.
diff --git a/share/cmake-3.2/Help/prop_tgt/LABELS.rst b/share/cmake-3.6/Help/prop_tgt/LABELS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LABELS.rst
rename to share/cmake-3.6/Help/prop_tgt/LABELS.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/LANG_CLANG_TIDY.rst b/share/cmake-3.6/Help/prop_tgt/LANG_CLANG_TIDY.rst
new file mode 100644
index 0000000..2887e23
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LANG_CLANG_TIDY.rst
@@ -0,0 +1,13 @@
+<LANG>_CLANG_TIDY
+-----------------
+
+This property is implemented only when ``<LANG>`` is ``C`` or ``CXX``.
+
+Specify a :ref:`;-list <CMake Language Lists>` containing a command
+line for the ``clang-tidy`` tool.  The :ref:`Makefile Generators`
+and the :generator:`Ninja` generator will run this tool along with the
+compiler and report a warning if the tool reports any problems.
+
+This property is initialized by the value of
+the :variable:`CMAKE_<LANG>_CLANG_TIDY` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/LANG_COMPILER_LAUNCHER.rst b/share/cmake-3.6/Help/prop_tgt/LANG_COMPILER_LAUNCHER.rst
new file mode 100644
index 0000000..0fe0b31
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LANG_COMPILER_LAUNCHER.rst
@@ -0,0 +1,13 @@
+<LANG>_COMPILER_LAUNCHER
+------------------------
+
+This property is implemented only when ``<LANG>`` is ``C`` or ``CXX``.
+
+Specify a :ref:`;-list <CMake Language Lists>` containing a command line
+for a compiler launching tool. The :ref:`Makefile Generators` and the
+:generator:`Ninja` generator will run this tool and pass the compiler and
+its arguments to the tool. Some example tools are distcc and ccache.
+
+This property is initialized by the value of
+the :variable:`CMAKE_<LANG>_COMPILER_LAUNCHER` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/LANG_INCLUDE_WHAT_YOU_USE.rst b/share/cmake-3.6/Help/prop_tgt/LANG_INCLUDE_WHAT_YOU_USE.rst
new file mode 100644
index 0000000..26f6d16
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LANG_INCLUDE_WHAT_YOU_USE.rst
@@ -0,0 +1,13 @@
+<LANG>_INCLUDE_WHAT_YOU_USE
+---------------------------
+
+This property is implemented only when ``<LANG>`` is ``C`` or ``CXX``.
+
+Specify a :ref:`;-list <CMake Language Lists>` containing a command
+line for the ``include-what-you-use`` tool.  The :ref:`Makefile Generators`
+and the :generator:`Ninja` generator will run this tool along with the
+compiler and report a warning if the tool reports any problems.
+
+This property is initialized by the value of
+the :variable:`CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/LANG_VISIBILITY_PRESET.rst b/share/cmake-3.6/Help/prop_tgt/LANG_VISIBILITY_PRESET.rst
new file mode 100644
index 0000000..5d34e20
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LANG_VISIBILITY_PRESET.rst
@@ -0,0 +1,13 @@
+<LANG>_VISIBILITY_PRESET
+------------------------
+
+Value for symbol visibility compile flags
+
+The ``<LANG>_VISIBILITY_PRESET`` property determines the value passed in a
+visibility related compile option, such as ``-fvisibility=`` for ``<LANG>``.
+This property affects compilation in sources of all types of targets
+(subject to policy :policy:`CMP0063`).
+
+This property is initialized by the value of the
+:variable:`CMAKE_<LANG>_VISIBILITY_PRESET` variable if it is set when a
+target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY.rst
new file mode 100644
index 0000000..785a57b
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY.rst
@@ -0,0 +1,9 @@
+LIBRARY_OUTPUT_DIRECTORY
+------------------------
+
+.. |XXX| replace:: :ref:`LIBRARY <Library Output Artifacts>`
+.. |xxx| replace:: library
+.. |CMAKE_XXX_OUTPUT_DIRECTORY| replace:: CMAKE_LIBRARY_OUTPUT_DIRECTORY
+.. include:: XXX_OUTPUT_DIRECTORY.txt
+
+See also the :prop_tgt:`LIBRARY_OUTPUT_DIRECTORY_<CONFIG>` target property.
diff --git a/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst
new file mode 100644
index 0000000..28dd404
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst
@@ -0,0 +1,16 @@
+LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
+---------------------------------
+
+Per-configuration output directory for
+:ref:`LIBRARY <Library Output Artifacts>` target files.
+
+This is a per-configuration version of the
+:prop_tgt:`LIBRARY_OUTPUT_DIRECTORY` target property, but
+multi-configuration generators (VS, Xcode) do NOT append a
+per-configuration subdirectory to the specified directory.  This
+property is initialized by the value of the
+:variable:`CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG>` variable if
+it is set when a target is created.
+
+Contents of ``LIBRARY_OUTPUT_DIRECTORY_<CONFIG>`` may use
+:manual:`generator expressions <cmake-generator-expressions(7)>`.
diff --git a/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_NAME.rst b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_NAME.rst
new file mode 100644
index 0000000..6027f7f
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_NAME.rst
@@ -0,0 +1,8 @@
+LIBRARY_OUTPUT_NAME
+-------------------
+
+.. |XXX| replace:: :ref:`LIBRARY <Library Output Artifacts>`
+.. |xxx| replace:: library
+.. include:: XXX_OUTPUT_NAME.txt
+
+See also the :prop_tgt:`LIBRARY_OUTPUT_NAME_<CONFIG>` target property.
diff --git a/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG.rst
new file mode 100644
index 0000000..1994c7b
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LIBRARY_OUTPUT_NAME_CONFIG.rst
@@ -0,0 +1,8 @@
+LIBRARY_OUTPUT_NAME_<CONFIG>
+----------------------------
+
+Per-configuration output name for
+:ref:`LIBRARY <Library Output Artifacts>` target files.
+
+This is the configuration-specific version of the
+:prop_tgt:`LIBRARY_OUTPUT_NAME` target property.
diff --git a/share/cmake-3.2/Help/prop_tgt/LINKER_LANGUAGE.rst b/share/cmake-3.6/Help/prop_tgt/LINKER_LANGUAGE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINKER_LANGUAGE.rst
rename to share/cmake-3.6/Help/prop_tgt/LINKER_LANGUAGE.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_DEPENDS.rst b/share/cmake-3.6/Help/prop_tgt/LINK_DEPENDS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINK_DEPENDS.rst
rename to share/cmake-3.6/Help/prop_tgt/LINK_DEPENDS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_DEPENDS_NO_SHARED.rst b/share/cmake-3.6/Help/prop_tgt/LINK_DEPENDS_NO_SHARED.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINK_DEPENDS_NO_SHARED.rst
rename to share/cmake-3.6/Help/prop_tgt/LINK_DEPENDS_NO_SHARED.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_FLAGS.rst b/share/cmake-3.6/Help/prop_tgt/LINK_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINK_FLAGS.rst
rename to share/cmake-3.6/Help/prop_tgt/LINK_FLAGS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_FLAGS_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/LINK_FLAGS_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINK_FLAGS_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/LINK_FLAGS_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_LIBRARIES.rst b/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_LIBRARIES.rst
new file mode 100644
index 0000000..2dcf45c
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_LIBRARIES.rst
@@ -0,0 +1,31 @@
+LINK_INTERFACE_LIBRARIES
+------------------------
+
+List public interface libraries for a shared library or executable.
+
+By default linking to a shared library target transitively links to
+targets with which the library itself was linked.  For an executable
+with exports (see the :prop_tgt:`ENABLE_EXPORTS` target property) no
+default transitive link dependencies are used.  This property replaces the default
+transitive link dependencies with an explicit list.  When the target
+is linked into another target using the :command:`target_link_libraries`
+command, the libraries listed (and recursively
+their link interface libraries) will be provided to the other target
+also.  If the list is empty then no transitive link dependencies will
+be incorporated when this target is linked into another target even if
+the default set is non-empty.  This property is initialized by the
+value of the :variable:`CMAKE_LINK_INTERFACE_LIBRARIES` variable if it is
+set when a target is created.  This property is ignored for ``STATIC``
+libraries.
+
+This property is overridden by the :prop_tgt:`INTERFACE_LINK_LIBRARIES`
+property if policy :policy:`CMP0022` is ``NEW``.
+
+This property is deprecated.  Use :prop_tgt:`INTERFACE_LINK_LIBRARIES`
+instead.
+
+Creating Relocatable Packages
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. |INTERFACE_PROPERTY_LINK| replace:: ``LINK_INTERFACE_LIBRARIES``
+.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
diff --git a/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG.rst
new file mode 100644
index 0000000..22ee5a6
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_LIBRARIES_CONFIG.rst
@@ -0,0 +1,20 @@
+LINK_INTERFACE_LIBRARIES_<CONFIG>
+---------------------------------
+
+Per-configuration list of public interface libraries for a target.
+
+This is the configuration-specific version of
+:prop_tgt:`LINK_INTERFACE_LIBRARIES`.  If set, this property completely
+overrides the generic property for the named configuration.
+
+This property is overridden by the :prop_tgt:`INTERFACE_LINK_LIBRARIES`
+property if policy :policy:`CMP0022` is ``NEW``.
+
+This property is deprecated.  Use :prop_tgt:`INTERFACE_LINK_LIBRARIES`
+instead.
+
+Creating Relocatable Packages
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. |INTERFACE_PROPERTY_LINK| replace:: ``LINK_INTERFACE_LIBRARIES_<CONFIG>``
+.. include:: /include/INTERFACE_LINK_LIBRARIES_WARNING.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY.rst b/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY.rst
rename to share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/LINK_INTERFACE_MULTIPLICITY_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/LINK_LIBRARIES.rst b/share/cmake-3.6/Help/prop_tgt/LINK_LIBRARIES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LINK_LIBRARIES.rst
rename to share/cmake-3.6/Help/prop_tgt/LINK_LIBRARIES.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/LINK_SEARCH_END_STATIC.rst b/share/cmake-3.6/Help/prop_tgt/LINK_SEARCH_END_STATIC.rst
new file mode 100644
index 0000000..cf9c871
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LINK_SEARCH_END_STATIC.rst
@@ -0,0 +1,18 @@
+LINK_SEARCH_END_STATIC
+----------------------
+
+End a link line such that static system libraries are used.
+
+Some linkers support switches such as -Bstatic and -Bdynamic to
+determine whether to use static or shared libraries for -lXXX options.
+CMake uses these options to set the link type for libraries whose full
+paths are not known or (in some cases) are in implicit link
+directories for the platform.  By default CMake adds an option at the
+end of the library list (if necessary) to set the linker search type
+back to its starting type.  This property switches the final linker
+search type to -Bstatic regardless of how it started.
+
+This property is initialized by the value of the variable
+CMAKE_LINK_SEARCH_END_STATIC if it is set when a target is created.
+
+See also LINK_SEARCH_START_STATIC.
diff --git a/share/cmake-3.6/Help/prop_tgt/LINK_SEARCH_START_STATIC.rst b/share/cmake-3.6/Help/prop_tgt/LINK_SEARCH_START_STATIC.rst
new file mode 100644
index 0000000..2e0f9bd
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/LINK_SEARCH_START_STATIC.rst
@@ -0,0 +1,19 @@
+LINK_SEARCH_START_STATIC
+------------------------
+
+Assume the linker looks for static libraries by default.
+
+Some linkers support switches such as -Bstatic and -Bdynamic to
+determine whether to use static or shared libraries for -lXXX options.
+CMake uses these options to set the link type for libraries whose full
+paths are not known or (in some cases) are in implicit link
+directories for the platform.  By default the linker search type is
+assumed to be -Bdynamic at the beginning of the library list.  This
+property switches the assumption to -Bstatic.  It is intended for use
+when linking an executable statically (e.g.  with the GNU -static
+option).
+
+This property is initialized by the value of the variable
+CMAKE_LINK_SEARCH_START_STATIC if it is set when a target is created.
+
+See also LINK_SEARCH_END_STATIC.
diff --git a/share/cmake-3.2/Help/prop_tgt/LOCATION.rst b/share/cmake-3.6/Help/prop_tgt/LOCATION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LOCATION.rst
rename to share/cmake-3.6/Help/prop_tgt/LOCATION.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/LOCATION_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/LOCATION_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/LOCATION_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/LOCATION_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/MACOSX_BUNDLE.rst b/share/cmake-3.6/Help/prop_tgt/MACOSX_BUNDLE.rst
new file mode 100644
index 0000000..7cd8046
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/MACOSX_BUNDLE.rst
@@ -0,0 +1,12 @@
+MACOSX_BUNDLE
+-------------
+
+Build an executable as an Application Bundle on OS X or iOS.
+
+When this property is set to ``TRUE`` the executable when built on OS X
+or iOS will be created as an application bundle.  This makes it
+a GUI executable that can be launched from the Finder.  See the
+:prop_tgt:`MACOSX_FRAMEWORK_INFO_PLIST` target property for information about
+creation of the ``Info.plist`` file for the application bundle.
+This property is initialized by the value of the variable
+:variable:`CMAKE_MACOSX_BUNDLE` if it is set when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/MACOSX_BUNDLE_INFO_PLIST.rst b/share/cmake-3.6/Help/prop_tgt/MACOSX_BUNDLE_INFO_PLIST.rst
new file mode 100644
index 0000000..8515acc
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/MACOSX_BUNDLE_INFO_PLIST.rst
@@ -0,0 +1,35 @@
+MACOSX_BUNDLE_INFO_PLIST
+------------------------
+
+Specify a custom ``Info.plist`` template for a OS X and iOS Application Bundle.
+
+An executable target with :prop_tgt:`MACOSX_BUNDLE` enabled will be built as an
+application bundle on OS X.  By default its ``Info.plist`` file is created
+by configuring a template called ``MacOSXBundleInfo.plist.in`` located in the
+:variable:`CMAKE_MODULE_PATH`.  This property specifies an alternative template
+file name which may be a full path.
+
+The following target properties may be set to specify content to be
+configured into the file:
+
+``MACOSX_BUNDLE_BUNDLE_NAME``
+  Sets ``CFBundleName``.
+``MACOSX_BUNDLE_BUNDLE_VERSION``
+  Sets ``CFBundleVersion``.
+``MACOSX_BUNDLE_COPYRIGHT``
+  Sets ``NSHumanReadableCopyright``.
+``MACOSX_BUNDLE_GUI_IDENTIFIER``
+  Sets ``CFBundleIdentifier``.
+``MACOSX_BUNDLE_ICON_FILE``
+  Sets ``CFBundleIconFile``.
+``MACOSX_BUNDLE_INFO_STRING``
+  Sets ``CFBundleGetInfoString``.
+``MACOSX_BUNDLE_LONG_VERSION_STRING``
+  Sets ``CFBundleLongVersionString``.
+``MACOSX_BUNDLE_SHORT_VERSION_STRING``
+  Sets ``CFBundleShortVersionString``.
+
+CMake variables of the same name may be set to affect all targets in a
+directory that do not have each specific property set.  If a custom
+``Info.plist`` is specified by this property it may of course hard-code
+all the settings instead of using the target properties.
diff --git a/share/cmake-3.6/Help/prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST.rst b/share/cmake-3.6/Help/prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST.rst
new file mode 100644
index 0000000..58f31d4
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/MACOSX_FRAMEWORK_INFO_PLIST.rst
@@ -0,0 +1,27 @@
+MACOSX_FRAMEWORK_INFO_PLIST
+---------------------------
+
+Specify a custom ``Info.plist`` template for a OS X and iOS Framework.
+
+A library target with :prop_tgt:`FRAMEWORK` enabled will be built as a
+framework on OS X.  By default its ``Info.plist`` file is created by
+configuring a template called ``MacOSXFrameworkInfo.plist.in`` located in the
+:variable:`CMAKE_MODULE_PATH`.  This property specifies an alternative template
+file name which may be a full path.
+
+The following target properties may be set to specify content to be
+configured into the file:
+
+``MACOSX_FRAMEWORK_BUNDLE_VERSION``
+  Sets ``CFBundleVersion``.
+``MACOSX_FRAMEWORK_ICON_FILE``
+  Sets ``CFBundleIconFile``.
+``MACOSX_FRAMEWORK_IDENTIFIER``
+  Sets ``CFBundleIdentifier``.
+``MACOSX_FRAMEWORK_SHORT_VERSION_STRING``
+  Sets ``CFBundleShortVersionString``.
+
+CMake variables of the same name may be set to affect all targets in a
+directory that do not have each specific property set.  If a custom
+``Info.plist`` is specified by this property it may of course hard-code
+all the settings instead of using the target properties.
diff --git a/share/cmake-3.6/Help/prop_tgt/MACOSX_RPATH.rst b/share/cmake-3.6/Help/prop_tgt/MACOSX_RPATH.rst
new file mode 100644
index 0000000..1f9a036
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/MACOSX_RPATH.rst
@@ -0,0 +1,23 @@
+MACOSX_RPATH
+------------
+
+Whether this target on OS X or iOS is located at runtime using rpaths.
+
+When this property is set to ``TRUE``, the directory portion of
+the ``install_name`` field of this shared library will be ``@rpath``
+unless overridden by :prop_tgt:`INSTALL_NAME_DIR`.  This indicates
+the shared library is to be found at runtime using runtime
+paths (rpaths).
+
+This property is initialized by the value of the variable
+:variable:`CMAKE_MACOSX_RPATH` if it is set when a target is
+created.
+
+Runtime paths will also be embedded in binaries using this target and
+can be controlled by the :prop_tgt:`INSTALL_RPATH` target property on
+the target linking to this target.
+
+Policy :policy:`CMP0042` was introduced to change the default value of
+``MACOSX_RPATH`` to ``TRUE``.  This is because use of ``@rpath`` is a
+more flexible and powerful alternative to ``@executable_path`` and
+``@loader_path``.
diff --git a/share/cmake-3.2/Help/prop_tgt/MAP_IMPORTED_CONFIG_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/MAP_IMPORTED_CONFIG_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/MAP_IMPORTED_CONFIG_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/MAP_IMPORTED_CONFIG_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/NAME.rst b/share/cmake-3.6/Help/prop_tgt/NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/NAME.rst
rename to share/cmake-3.6/Help/prop_tgt/NAME.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/NO_SONAME.rst b/share/cmake-3.6/Help/prop_tgt/NO_SONAME.rst
new file mode 100644
index 0000000..ee45ed8
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/NO_SONAME.rst
@@ -0,0 +1,14 @@
+NO_SONAME
+---------
+
+Whether to set "soname" when linking a shared library.
+
+Enable this boolean property if a generated shared library
+should not have "soname" set.  Default is to set "soname" on all
+shared libraries as long as the platform supports it.
+Generally, use this property only for leaf private libraries or
+plugins.  If you use it on normal shared libraries which other targets
+link against, on some platforms a linker will insert a full path to
+the library (as specified at link time) into the dynamic section of
+the dependent binary.  Therefore, once installed, dynamic loader may
+eventually fail to locate the library for the binary.
diff --git a/share/cmake-3.2/Help/prop_tgt/NO_SYSTEM_FROM_IMPORTED.rst b/share/cmake-3.6/Help/prop_tgt/NO_SYSTEM_FROM_IMPORTED.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/NO_SYSTEM_FROM_IMPORTED.rst
rename to share/cmake-3.6/Help/prop_tgt/NO_SYSTEM_FROM_IMPORTED.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/OSX_ARCHITECTURES.rst b/share/cmake-3.6/Help/prop_tgt/OSX_ARCHITECTURES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/OSX_ARCHITECTURES.rst
rename to share/cmake-3.6/Help/prop_tgt/OSX_ARCHITECTURES.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/OSX_ARCHITECTURES_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/OSX_ARCHITECTURES_CONFIG.rst
new file mode 100644
index 0000000..fb78177
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/OSX_ARCHITECTURES_CONFIG.rst
@@ -0,0 +1,7 @@
+OSX_ARCHITECTURES_<CONFIG>
+--------------------------
+
+Per-configuration OS X and iOS binary architectures for a target.
+
+This property is the configuration-specific version of
+:prop_tgt:`OSX_ARCHITECTURES`.
diff --git a/share/cmake-3.6/Help/prop_tgt/OUTPUT_NAME.rst b/share/cmake-3.6/Help/prop_tgt/OUTPUT_NAME.rst
new file mode 100644
index 0000000..f1bdb7c
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/OUTPUT_NAME.rst
@@ -0,0 +1,21 @@
+OUTPUT_NAME
+-----------
+
+Output name for target files.
+
+This sets the base name for output files created for an executable or
+library target.  If not set, the logical target name is used by
+default.
+
+Contents of ``OUTPUT_NAME`` and the variants listed below may use
+:manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+See also the variants:
+
+* :prop_tgt:`OUTPUT_NAME_<CONFIG>`
+* :prop_tgt:`ARCHIVE_OUTPUT_NAME_<CONFIG>`
+* :prop_tgt:`ARCHIVE_OUTPUT_NAME`
+* :prop_tgt:`LIBRARY_OUTPUT_NAME_<CONFIG>`
+* :prop_tgt:`LIBRARY_OUTPUT_NAME`
+* :prop_tgt:`RUNTIME_OUTPUT_NAME_<CONFIG>`
+* :prop_tgt:`RUNTIME_OUTPUT_NAME`
diff --git a/share/cmake-3.6/Help/prop_tgt/OUTPUT_NAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/OUTPUT_NAME_CONFIG.rst
new file mode 100644
index 0000000..41b782f
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/OUTPUT_NAME_CONFIG.rst
@@ -0,0 +1,7 @@
+OUTPUT_NAME_<CONFIG>
+--------------------
+
+Per-configuration target file base name.
+
+This is the configuration-specific version of the :prop_tgt:`OUTPUT_NAME`
+target property.
diff --git a/share/cmake-3.6/Help/prop_tgt/PDB_NAME.rst b/share/cmake-3.6/Help/prop_tgt/PDB_NAME.rst
new file mode 100644
index 0000000..3a65796
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/PDB_NAME.rst
@@ -0,0 +1,12 @@
+PDB_NAME
+--------
+
+Output name for the MS debug symbol ``.pdb`` file generated by the
+linker for an executable or shared library target.
+
+This property specifies the base name for the debug symbols file.
+If not set, the :prop_tgt:`OUTPUT_NAME` target property value or
+logical target name is used by default.
+
+.. |COMPILE_PDB_XXX| replace:: :prop_tgt:`COMPILE_PDB_NAME`
+.. include:: PDB_NOTE.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/PDB_NAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/PDB_NAME_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/PDB_NAME_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/PDB_NAME_CONFIG.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/PDB_NOTE.txt b/share/cmake-3.6/Help/prop_tgt/PDB_NOTE.txt
new file mode 100644
index 0000000..b5ada07
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/PDB_NOTE.txt
@@ -0,0 +1,9 @@
+.. note::
+ This property does not apply to STATIC library targets because no linker
+ is invoked to produce them so they have no linker-generated ``.pdb`` file
+ containing debug symbols.
+
+ The linker-generated program database files are specified by the
+ ``/pdb`` linker flag and are not the same as compiler-generated
+ program database files specified by the ``/Fd`` compiler flag.
+ Use the |COMPILE_PDB_XXX| property to specify the latter.
diff --git a/share/cmake-3.2/Help/prop_tgt/PDB_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/prop_tgt/PDB_OUTPUT_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/PDB_OUTPUT_DIRECTORY.rst
rename to share/cmake-3.6/Help/prop_tgt/PDB_OUTPUT_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/PDB_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/PDB_OUTPUT_DIRECTORY_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/PDB_OUTPUT_DIRECTORY_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/PDB_OUTPUT_DIRECTORY_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/POSITION_INDEPENDENT_CODE.rst b/share/cmake-3.6/Help/prop_tgt/POSITION_INDEPENDENT_CODE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/POSITION_INDEPENDENT_CODE.rst
rename to share/cmake-3.6/Help/prop_tgt/POSITION_INDEPENDENT_CODE.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/POST_INSTALL_SCRIPT.rst b/share/cmake-3.6/Help/prop_tgt/POST_INSTALL_SCRIPT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/POST_INSTALL_SCRIPT.rst
rename to share/cmake-3.6/Help/prop_tgt/POST_INSTALL_SCRIPT.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/PREFIX.rst b/share/cmake-3.6/Help/prop_tgt/PREFIX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/PREFIX.rst
rename to share/cmake-3.6/Help/prop_tgt/PREFIX.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/PRE_INSTALL_SCRIPT.rst b/share/cmake-3.6/Help/prop_tgt/PRE_INSTALL_SCRIPT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/PRE_INSTALL_SCRIPT.rst
rename to share/cmake-3.6/Help/prop_tgt/PRE_INSTALL_SCRIPT.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/PRIVATE_HEADER.rst b/share/cmake-3.6/Help/prop_tgt/PRIVATE_HEADER.rst
new file mode 100644
index 0000000..c4412ed
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/PRIVATE_HEADER.rst
@@ -0,0 +1,11 @@
+PRIVATE_HEADER
+--------------
+
+Specify private header files in a :prop_tgt:`FRAMEWORK` shared library target.
+
+Shared library targets marked with the :prop_tgt:`FRAMEWORK` property generate
+frameworks on OS X, iOS and normal shared libraries on other platforms.
+This property may be set to a list of header files to be placed in the
+PrivateHeaders directory inside the framework folder.  On non-Apple
+platforms these headers may be installed using the ``PRIVATE_HEADER``
+option to the ``install(TARGETS)`` command.
diff --git a/share/cmake-3.2/Help/prop_tgt/PROJECT_LABEL.rst b/share/cmake-3.6/Help/prop_tgt/PROJECT_LABEL.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/PROJECT_LABEL.rst
rename to share/cmake-3.6/Help/prop_tgt/PROJECT_LABEL.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/PUBLIC_HEADER.rst b/share/cmake-3.6/Help/prop_tgt/PUBLIC_HEADER.rst
new file mode 100644
index 0000000..d4a636c
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/PUBLIC_HEADER.rst
@@ -0,0 +1,11 @@
+PUBLIC_HEADER
+-------------
+
+Specify public header files in a :prop_tgt:`FRAMEWORK` shared library target.
+
+Shared library targets marked with the :prop_tgt:`FRAMEWORK` property generate
+frameworks on OS X, iOS and normal shared libraries on other platforms.
+This property may be set to a list of header files to be placed in the
+``Headers`` directory inside the framework folder.  On non-Apple platforms
+these headers may be installed using the ``PUBLIC_HEADER`` option to the
+``install(TARGETS)`` command.
diff --git a/share/cmake-3.6/Help/prop_tgt/RESOURCE.rst b/share/cmake-3.6/Help/prop_tgt/RESOURCE.rst
new file mode 100644
index 0000000..d837f7b
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/RESOURCE.rst
@@ -0,0 +1,61 @@
+RESOURCE
+--------
+
+Specify resource files in a :prop_tgt:`FRAMEWORK` or :prop_tgt:`BUNDLE`.
+
+Target marked with the :prop_tgt:`FRAMEWORK` or :prop_tgt:`BUNDLE` property
+generate framework or application bundle (both OS X and iOS is supported)
+or normal shared libraries on other platforms.
+This property may be set to a list of files to be placed in the corresponding
+directory (eg. ``Resources`` directory for OS X) inside the bundle.
+On non-Apple platforms these files may be installed using the ``RESOURCE``
+option to the ``install(TARGETS)`` command.
+
+Following example of Application Bundle:
+
+.. code-block:: cmake
+
+  add_executable(ExecutableTarget
+    addDemo.c
+    resourcefile.txt
+    appresourcedir/appres.txt
+  )
+
+  target_link_libraries(ExecutableTarget heymath mul)
+
+  set(RESOURCE_FILES
+    resourcefile.txt
+    appresourcedir/appres.txt
+  )
+
+  set_target_properties(ExecutableTarget PROPERTIES
+    MACOSX_BUNDLE TRUE
+    MACOSX_FRAMEWORK_IDENTIFIER org.cmake.ExecutableTarget
+    RESOURCE "${RESOURCE_FILES}"
+  )
+
+will produce flat structure for iOS systems::
+
+  ExecutableTarget.app
+    appres.txt
+    ExecutableTarget
+    Info.plist
+    resourcefile.txt
+
+For OS X systems it will produce following directory structure::
+
+  ExecutableTarget.app/
+    Contents
+      Info.plist
+      MacOS
+        ExecutableTarget
+      Resources
+        appres.txt
+        resourcefile.txt
+
+For Linux, such cmake script produce following files::
+
+  ExecutableTarget
+  Resources
+    appres.txt
+    resourcefile.txt
diff --git a/share/cmake-3.2/Help/prop_tgt/RULE_LAUNCH_COMPILE.rst b/share/cmake-3.6/Help/prop_tgt/RULE_LAUNCH_COMPILE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/RULE_LAUNCH_COMPILE.rst
rename to share/cmake-3.6/Help/prop_tgt/RULE_LAUNCH_COMPILE.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/RULE_LAUNCH_CUSTOM.rst b/share/cmake-3.6/Help/prop_tgt/RULE_LAUNCH_CUSTOM.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/RULE_LAUNCH_CUSTOM.rst
rename to share/cmake-3.6/Help/prop_tgt/RULE_LAUNCH_CUSTOM.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/RULE_LAUNCH_LINK.rst b/share/cmake-3.6/Help/prop_tgt/RULE_LAUNCH_LINK.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/RULE_LAUNCH_LINK.rst
rename to share/cmake-3.6/Help/prop_tgt/RULE_LAUNCH_LINK.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY.rst
new file mode 100644
index 0000000..12390f5
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY.rst
@@ -0,0 +1,9 @@
+RUNTIME_OUTPUT_DIRECTORY
+------------------------
+
+.. |XXX| replace:: :ref:`RUNTIME <Runtime Output Artifacts>`
+.. |xxx| replace:: runtime
+.. |CMAKE_XXX_OUTPUT_DIRECTORY| replace:: CMAKE_RUNTIME_OUTPUT_DIRECTORY
+.. include:: XXX_OUTPUT_DIRECTORY.txt
+
+See also the :prop_tgt:`RUNTIME_OUTPUT_DIRECTORY_<CONFIG>` target property.
diff --git a/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst
new file mode 100644
index 0000000..94fb277
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst
@@ -0,0 +1,16 @@
+RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
+---------------------------------
+
+Per-configuration output directory for
+:ref:`RUNTIME <Runtime Output Artifacts>` target files.
+
+This is a per-configuration version of the
+:prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` target property, but
+multi-configuration generators (VS, Xcode) do NOT append a
+per-configuration subdirectory to the specified directory.  This
+property is initialized by the value of the
+:variable:`CMAKE_RUNTIME_OUTPUT_DIRECTORY_<CONFIG>` variable if
+it is set when a target is created.
+
+Contents of ``RUNTIME_OUTPUT_DIRECTORY_<CONFIG>`` may use
+:manual:`generator expressions <cmake-generator-expressions(7)>`.
diff --git a/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_NAME.rst b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_NAME.rst
new file mode 100644
index 0000000..11729c3
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_NAME.rst
@@ -0,0 +1,8 @@
+RUNTIME_OUTPUT_NAME
+-------------------
+
+.. |XXX| replace:: :ref:`RUNTIME <Runtime Output Artifacts>`
+.. |xxx| replace:: runtime
+.. include:: XXX_OUTPUT_NAME.txt
+
+See also the :prop_tgt:`RUNTIME_OUTPUT_NAME_<CONFIG>` target property.
diff --git a/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG.rst
new file mode 100644
index 0000000..b6a31bf
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/RUNTIME_OUTPUT_NAME_CONFIG.rst
@@ -0,0 +1,8 @@
+RUNTIME_OUTPUT_NAME_<CONFIG>
+----------------------------
+
+Per-configuration output name for
+:ref:`RUNTIME <Runtime Output Artifacts>` target files.
+
+This is the configuration-specific version of the
+:prop_tgt:`RUNTIME_OUTPUT_NAME` target property.
diff --git a/share/cmake-3.2/Help/prop_tgt/SKIP_BUILD_RPATH.rst b/share/cmake-3.6/Help/prop_tgt/SKIP_BUILD_RPATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/SKIP_BUILD_RPATH.rst
rename to share/cmake-3.6/Help/prop_tgt/SKIP_BUILD_RPATH.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/SOURCES.rst b/share/cmake-3.6/Help/prop_tgt/SOURCES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/SOURCES.rst
rename to share/cmake-3.6/Help/prop_tgt/SOURCES.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/SOURCE_DIR.rst b/share/cmake-3.6/Help/prop_tgt/SOURCE_DIR.rst
new file mode 100644
index 0000000..b25813b
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/SOURCE_DIR.rst
@@ -0,0 +1,6 @@
+SOURCE_DIR
+----------
+
+This read-only property reports the value of the
+:variable:`CMAKE_CURRENT_SOURCE_DIR` variable in the directory in which
+the target was defined.
diff --git a/share/cmake-3.2/Help/prop_tgt/SOVERSION.rst b/share/cmake-3.6/Help/prop_tgt/SOVERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/SOVERSION.rst
rename to share/cmake-3.6/Help/prop_tgt/SOVERSION.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/STATIC_LIBRARY_FLAGS.rst b/share/cmake-3.6/Help/prop_tgt/STATIC_LIBRARY_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/STATIC_LIBRARY_FLAGS.rst
rename to share/cmake-3.6/Help/prop_tgt/STATIC_LIBRARY_FLAGS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/STATIC_LIBRARY_FLAGS_CONFIG.rst b/share/cmake-3.6/Help/prop_tgt/STATIC_LIBRARY_FLAGS_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/STATIC_LIBRARY_FLAGS_CONFIG.rst
rename to share/cmake-3.6/Help/prop_tgt/STATIC_LIBRARY_FLAGS_CONFIG.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/SUFFIX.rst b/share/cmake-3.6/Help/prop_tgt/SUFFIX.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/SUFFIX.rst
rename to share/cmake-3.6/Help/prop_tgt/SUFFIX.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/TYPE.rst b/share/cmake-3.6/Help/prop_tgt/TYPE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/TYPE.rst
rename to share/cmake-3.6/Help/prop_tgt/TYPE.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VERSION.rst b/share/cmake-3.6/Help/prop_tgt/VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VERSION.rst
rename to share/cmake-3.6/Help/prop_tgt/VERSION.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/VISIBILITY_INLINES_HIDDEN.rst b/share/cmake-3.6/Help/prop_tgt/VISIBILITY_INLINES_HIDDEN.rst
new file mode 100644
index 0000000..adbbc71
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/VISIBILITY_INLINES_HIDDEN.rst
@@ -0,0 +1,13 @@
+VISIBILITY_INLINES_HIDDEN
+-------------------------
+
+Whether to add a compile flag to hide symbols of inline functions
+
+The ``VISIBILITY_INLINES_HIDDEN`` property determines whether a flag for
+hiding symbols for inline functions, such as ``-fvisibility-inlines-hidden``,
+should be used when invoking the compiler.  This property affects compilation
+in sources of all types of targets (subject to policy :policy:`CMP0063`).
+
+This property is initialized by
+the value of the :variable:`CMAKE_VISIBILITY_INLINES_HIDDEN` variable if it
+is set when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/VS_CONFIGURATION_TYPE.rst b/share/cmake-3.6/Help/prop_tgt/VS_CONFIGURATION_TYPE.rst
new file mode 100644
index 0000000..ff987ff
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/VS_CONFIGURATION_TYPE.rst
@@ -0,0 +1,10 @@
+VS_CONFIGURATION_TYPE
+---------------------
+
+Visual Studio project configuration type.
+
+Sets the ``ConfigurationType`` attribute for a generated Visual Studio project.
+If this property is set, it overrides the default setting that is based on the
+target type (e.g. ``StaticLibrary``, ``Application``, ...).
+
+Supported on :ref:`Visual Studio Generators` for VS 2010 and higher.
diff --git a/share/cmake-3.6/Help/prop_tgt/VS_DESKTOP_EXTENSIONS_VERSION.rst b/share/cmake-3.6/Help/prop_tgt/VS_DESKTOP_EXTENSIONS_VERSION.rst
new file mode 100644
index 0000000..19d1620
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/VS_DESKTOP_EXTENSIONS_VERSION.rst
@@ -0,0 +1,10 @@
+VS_DESKTOP_EXTENSIONS_VERSION
+-----------------------------
+
+Visual Studio Windows 10 Desktop Extensions Version
+
+Specifies the version of the Desktop Extensions that should be included in the
+target. For example ``10.0.10240.0``. If the value is not specified, the Desktop
+Extensions will not be included. To use the same version of the extensions as
+the Windows 10 SDK that is being used, you can use the
+:variable:`CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION` variable.
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_DOTNET_REFERENCES.rst b/share/cmake-3.6/Help/prop_tgt/VS_DOTNET_REFERENCES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_DOTNET_REFERENCES.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_DOTNET_REFERENCES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_DOTNET_TARGET_FRAMEWORK_VERSION.rst b/share/cmake-3.6/Help/prop_tgt/VS_DOTNET_TARGET_FRAMEWORK_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_DOTNET_TARGET_FRAMEWORK_VERSION.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_DOTNET_TARGET_FRAMEWORK_VERSION.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_KEYWORD.rst b/share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_KEYWORD.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_KEYWORD.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_KEYWORD.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_PROJECT_TYPES.rst b/share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_PROJECT_TYPES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_PROJECT_TYPES.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_PROJECT_TYPES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_ROOTNAMESPACE.rst b/share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_ROOTNAMESPACE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_ROOTNAMESPACE.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_ROOTNAMESPACE.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_variable.rst b/share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_variable.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_GLOBAL_variable.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_GLOBAL_variable.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/VS_IOT_EXTENSIONS_VERSION.rst b/share/cmake-3.6/Help/prop_tgt/VS_IOT_EXTENSIONS_VERSION.rst
new file mode 100644
index 0000000..27c8a3d
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/VS_IOT_EXTENSIONS_VERSION.rst
@@ -0,0 +1,10 @@
+VS_IOT_EXTENSIONS_VERSION
+-------------------------
+
+Visual Studio Windows 10 IoT Extensions Version
+
+Specifies the version of the IoT Extensions that should be included in the
+target. For example ``10.0.10240.0``. If the value is not specified, the IoT
+Extensions will not be included. To use the same version of the extensions as
+the Windows 10 SDK that is being used, you can use the
+:variable:`CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION` variable.
diff --git a/share/cmake-3.6/Help/prop_tgt/VS_IOT_STARTUP_TASK.rst b/share/cmake-3.6/Help/prop_tgt/VS_IOT_STARTUP_TASK.rst
new file mode 100644
index 0000000..add50cb
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/VS_IOT_STARTUP_TASK.rst
@@ -0,0 +1,6 @@
+VS_IOT_STARTUP_TASK
+-------------------
+
+Visual Studio Windows 10 IoT Continuous Background Task
+
+Specifies that the target should be compiled as a Continuous Background Task library.
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_KEYWORD.rst b/share/cmake-3.6/Help/prop_tgt/VS_KEYWORD.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_KEYWORD.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_KEYWORD.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/VS_MOBILE_EXTENSIONS_VERSION.rst b/share/cmake-3.6/Help/prop_tgt/VS_MOBILE_EXTENSIONS_VERSION.rst
new file mode 100644
index 0000000..be3c9a0
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/VS_MOBILE_EXTENSIONS_VERSION.rst
@@ -0,0 +1,10 @@
+VS_MOBILE_EXTENSIONS_VERSION
+----------------------------
+
+Visual Studio Windows 10 Mobile Extensions Version
+
+Specifies the version of the Mobile Extensions that should be included in the
+target. For example ``10.0.10240.0``. If the value is not specified, the Mobile
+Extensions will not be included. To use the same version of the extensions as
+the Windows 10 SDK that is being used, you can use the
+:variable:`CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION` variable.
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_SCC_AUXPATH.rst b/share/cmake-3.6/Help/prop_tgt/VS_SCC_AUXPATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_SCC_AUXPATH.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_SCC_AUXPATH.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_SCC_LOCALPATH.rst b/share/cmake-3.6/Help/prop_tgt/VS_SCC_LOCALPATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_SCC_LOCALPATH.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_SCC_LOCALPATH.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_SCC_PROJECTNAME.rst b/share/cmake-3.6/Help/prop_tgt/VS_SCC_PROJECTNAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_SCC_PROJECTNAME.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_SCC_PROJECTNAME.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_SCC_PROVIDER.rst b/share/cmake-3.6/Help/prop_tgt/VS_SCC_PROVIDER.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_SCC_PROVIDER.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_SCC_PROVIDER.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION.rst b/share/cmake-3.6/Help/prop_tgt/VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION.rst
new file mode 100644
index 0000000..1ad7a71
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION.rst
@@ -0,0 +1,10 @@
+VS_WINDOWS_TARGET_PLATFORM_MIN_VERSION
+--------------------------------------
+
+Visual Studio Windows Target Platform Minimum Version
+
+For Windows 10. Specifies the minimum version of the OS that is being
+targeted. For example ``10.0.10240.0``. If the value is not specified, the
+value of :variable:`CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION` will be used on
+WindowsStore projects otherwise the target platform minimum version will not
+be specified for the project.
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_WINRT_COMPONENT.rst b/share/cmake-3.6/Help/prop_tgt/VS_WINRT_COMPONENT.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_WINRT_COMPONENT.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_WINRT_COMPONENT.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_WINRT_EXTENSIONS.rst b/share/cmake-3.6/Help/prop_tgt/VS_WINRT_EXTENSIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_WINRT_EXTENSIONS.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_WINRT_EXTENSIONS.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/VS_WINRT_REFERENCES.rst b/share/cmake-3.6/Help/prop_tgt/VS_WINRT_REFERENCES.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/VS_WINRT_REFERENCES.rst
rename to share/cmake-3.6/Help/prop_tgt/VS_WINRT_REFERENCES.rst
diff --git a/share/cmake-3.2/Help/prop_tgt/WIN32_EXECUTABLE.rst b/share/cmake-3.6/Help/prop_tgt/WIN32_EXECUTABLE.rst
similarity index 100%
rename from share/cmake-3.2/Help/prop_tgt/WIN32_EXECUTABLE.rst
rename to share/cmake-3.6/Help/prop_tgt/WIN32_EXECUTABLE.rst
diff --git a/share/cmake-3.6/Help/prop_tgt/WINDOWS_EXPORT_ALL_SYMBOLS.rst b/share/cmake-3.6/Help/prop_tgt/WINDOWS_EXPORT_ALL_SYMBOLS.rst
new file mode 100644
index 0000000..3f48af8
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/WINDOWS_EXPORT_ALL_SYMBOLS.rst
@@ -0,0 +1,18 @@
+WINDOWS_EXPORT_ALL_SYMBOLS
+--------------------------
+
+This property is implemented only for MS-compatible tools on Windows.
+
+Enable this boolean property to automatically create a module definition
+(``.def``) file with all global symbols found in the input ``.obj`` files
+for a ``SHARED`` library on Windows.  The module definition file will be
+passed to the linker causing all symbols to be exported from the ``.dll``.
+For global *data* symbols, ``__declspec(dllimport)`` must still be used when
+compiling against the code in the ``.dll``.  All other function symbols will
+be automatically exported and imported by callers.  This simplifies porting
+projects to Windows by reducing the need for explicit ``dllexport`` markup,
+even in ``C++`` classes.
+
+This property is initialized by the value of
+the :variable:`CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS` variable if it is set
+when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/XCODE_ATTRIBUTE_an-attribute.rst b/share/cmake-3.6/Help/prop_tgt/XCODE_ATTRIBUTE_an-attribute.rst
new file mode 100644
index 0000000..7e00ac4
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/XCODE_ATTRIBUTE_an-attribute.rst
@@ -0,0 +1,16 @@
+XCODE_ATTRIBUTE_<an-attribute>
+------------------------------
+
+Set Xcode target attributes directly.
+
+Tell the Xcode generator to set '<an-attribute>' to a given value in
+the generated Xcode project.  Ignored on other generators.
+
+See the :variable:`CMAKE_XCODE_ATTRIBUTE_<an-attribute>` variable
+to set attributes on all targets in a directory tree.
+
+Contents of ``XCODE_ATTRIBUTE_<an-attribute>`` may use
+"generator expressions" with the syntax ``$<...>``.  See the
+:manual:`cmake-generator-expressions(7)` manual for available
+expressions.  See the :manual:`cmake-buildsystem(7)` manual
+for more on defining buildsystem properties.
diff --git a/share/cmake-3.6/Help/prop_tgt/XCTEST.rst b/share/cmake-3.6/Help/prop_tgt/XCTEST.rst
new file mode 100644
index 0000000..eb47e60
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/XCTEST.rst
@@ -0,0 +1,13 @@
+XCTEST
+------
+
+This target is a XCTest CFBundle on the Mac.
+
+This property will usually get set via the :command:`xctest_add_bundle`
+macro in :module:`FindXCTest` module.
+
+If a module library target has this property set to true it will be
+built as a CFBundle when built on the Mac.  It will have the directory
+structure required for a CFBundle.
+
+This property depends on :prop_tgt:`BUNDLE` to be effective.
diff --git a/share/cmake-3.6/Help/prop_tgt/XXX_OUTPUT_DIRECTORY.txt b/share/cmake-3.6/Help/prop_tgt/XXX_OUTPUT_DIRECTORY.txt
new file mode 100644
index 0000000..3ae5448
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/XXX_OUTPUT_DIRECTORY.txt
@@ -0,0 +1,11 @@
+Output directory in which to build |XXX| target files.
+
+This property specifies the directory into which |xxx| target files
+should be built.  The property value may use
+:manual:`generator expressions <cmake-generator-expressions(7)>`.
+Multi-configuration generators (VS, Xcode) append a per-configuration
+subdirectory to the specified directory unless a generator expression
+is used.
+
+This property is initialized by the value of the variable
+|CMAKE_XXX_OUTPUT_DIRECTORY| if it is set when a target is created.
diff --git a/share/cmake-3.6/Help/prop_tgt/XXX_OUTPUT_NAME.txt b/share/cmake-3.6/Help/prop_tgt/XXX_OUTPUT_NAME.txt
new file mode 100644
index 0000000..126f391
--- /dev/null
+++ b/share/cmake-3.6/Help/prop_tgt/XXX_OUTPUT_NAME.txt
@@ -0,0 +1,5 @@
+Output name for |XXX| target files.
+
+This property specifies the base name for |xxx| target files.  It
+overrides :prop_tgt:`OUTPUT_NAME` and :prop_tgt:`OUTPUT_NAME_<CONFIG>`
+properties.
diff --git a/share/cmake-3.2/Help/release/3.0.rst b/share/cmake-3.6/Help/release/3.0.rst
similarity index 100%
rename from share/cmake-3.2/Help/release/3.0.rst
rename to share/cmake-3.6/Help/release/3.0.rst
diff --git a/share/cmake-3.2/Help/release/3.1.rst b/share/cmake-3.6/Help/release/3.1.rst
similarity index 100%
rename from share/cmake-3.2/Help/release/3.1.rst
rename to share/cmake-3.6/Help/release/3.1.rst
diff --git a/share/cmake-3.2/Help/release/3.2.rst b/share/cmake-3.6/Help/release/3.2.rst
similarity index 100%
rename from share/cmake-3.2/Help/release/3.2.rst
rename to share/cmake-3.6/Help/release/3.2.rst
diff --git a/share/cmake-3.6/Help/release/3.3.rst b/share/cmake-3.6/Help/release/3.3.rst
new file mode 100644
index 0000000..0beb354
--- /dev/null
+++ b/share/cmake-3.6/Help/release/3.3.rst
@@ -0,0 +1,287 @@
+CMake 3.3 Release Notes
+***********************
+
+.. only:: html
+
+  .. contents::
+
+Changes made since CMake 3.2 include the following.
+
+New Features
+============
+
+Generators
+----------
+
+* The :ref:`Makefile Generators` now add ``.DELETE_ON_ERROR`` to the
+  makefiles that contain the actual build rules for files on disk.
+  This tells GNU make to remove rule outputs when their recipe
+  modifies an output but fails.
+
+* The :ref:`Visual Studio Generators` learned to support ``.xaml``
+  source files and automatically associate them with corresponding
+  ``.h`` and ``.cpp`` sources.
+
+* A new experimental :generator:`Green Hills MULTI` generator was
+  added on Windows.  `Green Hills MULTI`_ is an IDE for embedded
+  real-time systems.
+
+.. _`Green Hills MULTI`: http://www.ghs.com/products/MULTI_IDE.html
+
+Commands
+--------
+
+* The :command:`add_dependencies` command learned to allow dependencies
+  to be added to :ref:`interface libraries <Interface Libraries>`.
+  Dependencies added to an interface library are followed transitively
+  in its place since the target itself does not build.
+
+* The :command:`execute_process` command learned to support specifying
+  the same file for ``OUTPUT_FILE`` and ``ERROR_FILE``.
+
+* The :command:`file(GLOB)` and :command:`file(GLOB_RECURSE)` commands
+  learned a new ``LIST_DIRECTORIES <bool>`` option to specify whether
+  the glob result should include directories.
+
+* The :command:`find_library`, :command:`find_path`, and :command:`find_file`
+  commands now search in installation prefixes derived from the ``PATH``
+  environment variable.
+
+* The :command:`if` command learned a new ``IN_LIST`` operator that
+  evaluates to true if a given element is contained in a named list.
+
+* The :command:`install(EXPORT)` and :command:`export()` commands
+  learned to export targets that populate the :prop_tgt:`INTERFACE_SOURCES`
+  target property.
+
+* The :command:`install(TARGETS)` command learned to support
+  generator expressions in the ``DESTINATION`` value.
+
+Variables
+---------
+
+* The version of some Fortran compilers is now detected and stored in the
+  :variable:`CMAKE_Fortran_COMPILER_VERSION <CMAKE_<LANG>_COMPILER_VERSION>`
+  variable.
+
+* The :ref:`Visual Studio Generators` learned a new
+  :variable:`CMAKE_VS_INCLUDE_INSTALL_TO_DEFAULT_BUILD` option
+  to put the ``INSTALL`` target in the default build of a
+  solution (``.sln``) file.
+
+Properties
+----------
+
+* A :prop_tgt:`CROSSCOMPILING_EMULATOR` target property and supporting
+  :variable:`CMAKE_CROSSCOMPILING_EMULATOR` variable were introduced
+  to allow target platform binaries to run on the host during cross
+  compiling.
+
+* A :prop_tgt:`<LANG>_INCLUDE_WHAT_YOU_USE` target property and supporting
+  :variable:`CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE` variable were introduced
+  to tell the :ref:`Makefile Generators` and the :generator:`Ninja` generator
+  to run ``include-what-you-use`` along with the compiler for ``C`` and
+  ``CXX`` languages.
+
+* The :prop_tgt:`<LANG>_VISIBILITY_PRESET` and
+  :prop_tgt:`VISIBILITY_INLINES_HIDDEN` target properties now
+  affect compilation in sources of all target types.  See
+  policy :policy:`CMP0063`.
+
+* The :prop_tgt:`XCODE_ATTRIBUTE_<an-attribute>` target property learned
+  to support generator expressions.
+
+Modules
+-------
+
+* The :module:`CheckFortranCompilerFlag` module was introduced
+  to check ``Fortran`` compiler flags, much like the
+  :module:`CheckCCompilerFlag` module already does for ``C``.
+
+* The :module:`ExternalData` module learned a new
+  :variable:`ExternalData_NO_SYMLINKS` option to disable use of
+  symbolic links to populate the real data files and use copies
+  instead.
+
+* The :module:`ExternalData` module learned a new ``RECURSE:``
+  option in ``DATA{}`` references specifying directories.
+  This allows an entire directory tree of associated files
+  to be matched.
+
+* The :module:`ExternalData` module learned a new URL template
+  placeholder ``%(algo:<key>)`` to allow custom mapping from
+  algorithm name to URL component through configuration of new
+  :variable:`ExternalData_URL_ALGO_<algo>_<key>` variables.
+  This allows more flexibility in remote URLs.
+
+* The :module:`ExternalProject` module learned to replace tokens
+  like ``<BINARY_DIR>`` in the ``BYPRODUCTS`` of each step.
+
+* The :module:`ExternalProject` module APIs learned to support
+  :manual:`generator expressions <cmake-generator-expressions(7)>`
+  when using ``LOG_*`` options and in CMake initial cache options.
+
+* The :module:`FindBoost` module now tracks the directories containing
+  libraries separately for RELEASE and DEBUG configurations.
+
+* The :module:`FindCUDA` module now defaults to using the static
+  CUDA runtime library if it is available.  A new
+  ``CUDA_USE_STATIC_CUDA_RUNTIME`` option is offered to control
+  this behavior.
+
+* The :module:`FindMatlab` module was completely rewritten.  It learned
+  about versions and components and to find Matlab in a more precise and
+  multiplatform way.  The module now offers APIs to create mex extensions,
+  documentation, and unit tests.
+
+* The :module:`FindPackageHandleStandardArgs` module
+  ``FIND_PACKAGE_HANDLE_STANDARD_ARGS`` function now
+  always populates both the ``<PackageName>_FOUND``
+  and ``<UPPERCASE_NAME>_FOUND`` variables (the latter
+  for backwards compatibility).  The ``FOUND_VAR``
+  option is now ignored except to enforce its allowed
+  values.
+
+* The :module:`InstallRequiredSystemLibraries` module learned a new
+  ``CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT`` option to specify the
+  installation component.
+
+Generator Expressions
+---------------------
+
+* A new ``COMPILE_LANGUAGE`` generator expression was introduced to
+  allow specification of compile options for target files based on the
+  :prop_sf:`LANGUAGE` of each source file.  Due to limitations of the
+  underlying native build tools, this feature has varying support across
+  generators.  See the :manual:`cmake-generator-expressions(7)` manual
+  for details.
+
+CTest
+-----
+
+* The :manual:`ctest(1)` tool learned a new ``--repeat-until-fail <n>``
+  option to help find sporadic test failures.
+
+* The :module:`CTestCoverageCollectGCOV` module learned to support
+  the same ``CTEST_CUSTOM_COVERAGE_EXCLUDE`` option as the
+  :command:`ctest_coverage` command.
+
+CPack
+-----
+
+* The :manual:`cpack(1)` ``IFW`` generator and the :module:`CPackIFW`
+  module learned to support Qt Framework Installer 2.0 tools.
+
+* The :module:`CPackDeb` module learned a new
+  :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_SHLIBDEPS`
+  variable to specify per-component use of ``dpkg-shlibdeps``.
+
+* The :module:`CPackDeb` module learned a new
+  :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_DEPENDS`
+  option to specify per-component dependencies.
+
+* The :module:`CPackRPM` module learned to package symbolic links
+  more cleanly and now supports directory symlinks with recent
+  ``rpmbuild`` versions.
+
+* The :module:`CPackRPM` module learned a new
+  :variable:`CPACK_RPM_ADDITIONAL_MAN_DIRS` variable to specify
+  directories containing man pages for the brp-compress RPM macro.
+
+* The :module:`CPackRPM` module learned a new
+  :variable:`CPACK_RPM_<component>_PACKAGE_ARCHITECTURE` variable
+  to specify a component-specific package architecture.
+
+* The CPack WIX generator learned the new
+  :prop_inst:`CPACK_START_MENU_SHORTCUTS`,
+  :prop_inst:`CPACK_DESKTOP_SHORTCUTS` and
+  :prop_inst:`CPACK_STARTUP_SHORTCUTS` installed file properties which can
+  be used to install shorcuts in the Start Menu, on the Desktop and
+  in the Startup Folder respectively.
+
+Other
+-----
+
+* The :manual:`Compile Features <cmake-compile-features(7)>` functionality
+  is now aware of features supported by GNU compilers on Windows, versions
+  4.4 through 5.0.
+
+* The :manual:`cmake(1)` ``-E tar`` command learned a new
+  ``--format<format>`` option to specify the archive format to
+  be written.
+
+* On OS X, CMake learned to create XCTest bundles to test Frameworks
+  and App Bundles within Xcode.  The :module:`FindXCTest` module
+  provides convenience functions to handle :prop_tgt:`XCTEST` bundles.
+
+Deprecated and Removed Features
+===============================
+
+* On OS X the :manual:`cmake-gui(1)` no longer has the
+  ``Install For Command Line Use`` menu item.  Instead there
+  is a ``How to Install For Command Line Use`` menu item
+  that shows an informational dialog box explaining how to
+  make the command line tools available.  For example::
+
+    /Applications/CMake.app/Contents/bin/cmake-gui --install
+
+* The :command:`ctest_build` and :command:`build_command` commands
+  no longer tell ``make`` tools to ignore errors with the ``-i`` option.
+  Previously this was done for :ref:`Makefile Generators` but not others.
+  See policy :policy:`CMP0061`.
+
+* The :generator:`Visual Studio 10 2010` generator no longer checks
+  for running VS IDEs with the project open or asks them to reload.
+  This was originally done for VS 10 because it had been done for
+  VS 7 through 9 to avoid prompting for every project in a solution.
+  Since VS >= 10 allow the whole solution to reload at once they
+  do not need CMake to help them.
+
+* The :generator:`Visual Studio 7` generator (.NET 2002) is now
+  deprecated and will be removed in a future version of CMake.
+
+* The :generator:`Visual Studio 6` generator is now deprecated
+  and will be removed in a future version of CMake.
+
+* The :command:`find_package` command no longer considers project
+  build trees recently configured in a :manual:`cmake-gui(1)`.
+  This was previously done only on Windows and is now never done.
+  The ``NO_CMAKE_BUILDS_PATH`` option is now ignored if given
+  and effectively always on.
+  Projects may populate the :ref:`User Package Registry` to aid
+  users building multiple dependent projects one after another.
+
+* The :command:`add_definitions()` command no longer causes a
+  :prop_dir:`DEFINITIONS` directory property to be populated. See policy
+  :policy:`CMP0059`.
+
+* With Visual Studio 7, 8, and 9 generators the value of the ``$(OutDir)``
+  placeholder no longer evaluates to the configuration name.  Projects
+  should use ``$(ConfigurationName)`` for that instead.
+
+* Using the output of :command:`export()` with the :command:`install(FILES)`
+  command is no longer allowed.  See policy :policy:`CMP0062` for details.
+
+Other Changes
+=============
+
+* The :generator:`Ninja` generator now requires that calls to the
+  :command:`add_custom_command` and :command:`add_custom_target`
+  commands use the ``BYPRODUCTS`` option to explicitly specify any
+  files generated by the custom commands that are not listed as
+  outputs (perhaps because their timestamps are allowed to be older
+  than the inputs).  See policy :policy:`CMP0058`.
+
+* Build-time progress output of :ref:`Makefile Generators` has been improved.
+  It no longer mixes progress and build rule messages during parallel builds.
+  The link rule messages now have progress and are displayed as bold green
+  instead of bold red (since red is often associated with an error message).
+
+* The :variable:`CMAKE_CFG_INTDIR` variable value for Visual Studio
+  7, 8, and 9 is now ``$(ConfigurationName)`` instead of ``$(OutDir)``.
+  This should have no effect on the intended use cases of the variable.
+
+* Linking to library files by a full path in an implicit linker search
+  directory (e.g. ``/usr/lib/libfoo.a``) no longer asks the linker to
+  search for the library (e.g. ``-lfoo``) and now links by full path.
+  See policy :policy:`CMP0060`.
diff --git a/share/cmake-3.6/Help/release/3.4.rst b/share/cmake-3.6/Help/release/3.4.rst
new file mode 100644
index 0000000..89c5561
--- /dev/null
+++ b/share/cmake-3.6/Help/release/3.4.rst
@@ -0,0 +1,273 @@
+CMake 3.4 Release Notes
+***********************
+
+.. only:: html
+
+  .. contents::
+
+Changes made since CMake 3.3 include the following.
+
+New Features
+============
+
+Generators
+----------
+
+* The :generator:`Visual Studio 14 2015` generator learned to select
+  a Windows 10 SDK based on the value of the :variable:`CMAKE_SYSTEM_VERSION`
+  variable and the SDKs available on the host.
+
+* CMake learned rudimentary support for the Apple Swift language.  When using
+  the :generator:`Xcode` generator with Xcode 6.1 or higher, one may enable
+  the ``Swift`` language with the :command:`enable_language` command or the
+  :command:`project` command (this is an error with other generators or when
+  Xcode is too old).  Then one may list ``.swift`` source files in targets
+  for compilation.
+
+Commands
+--------
+
+* The :command:`find_program` command learned a ``NAMES_PER_DIR``
+  option to consider all given ``NAMES`` in each directory before
+  moving on to the next directory.
+
+* The :command:`get_filename_component` command learned a new ``BASE_DIR``
+  subcommand.  This is used to specify a base directory when calculating an
+  absolute path from a relative path.
+
+* The :command:`if` command learned a new ``TEST`` operator that evaluates
+  to true if a given test name has been defined by the :command:`add_test`
+  command.  See policy :policy:`CMP0064`.
+
+* The :command:`install(DIRECTORY)` command ``DESTINATION`` option learned to
+  support :manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+* The :command:`install(FILES)` command ``DESTINATION`` option learned to
+  support :manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+* The :command:`string` command learned a new ``APPEND`` subcommand.
+
+Variables
+---------
+
+* The :ref:`Makefile Generators` and the :generator:`Ninja` generator
+  learned to add compiler launcher tools like distcc and ccache along
+  with the compiler for ``C`` and ``CXX`` languages.  See the
+  :variable:`CMAKE_<LANG>_COMPILER_LAUNCHER` variable and
+  :prop_tgt:`<LANG>_COMPILER_LAUNCHER` target property for details.
+
+* New :variable:`CMAKE_LINK_SEARCH_START_STATIC` and
+  :variable:`CMAKE_LINK_SEARCH_END_STATIC` variables were
+  introduced to initialize the
+  :prop_tgt:`LINK_SEARCH_START_STATIC` and
+  :prop_tgt:`LINK_SEARCH_END_STATIC` target properties,
+  respectively.
+
+Properties
+----------
+
+* :ref:`Visual Studio Generators` learned to support additonal
+  target properties to customize projects for NVIDIA Nsight
+  Tegra Visual Studio Edition:
+
+  * :prop_tgt:`ANDROID_ANT_ADDITIONAL_OPTIONS`
+  * :prop_tgt:`ANDROID_ARCH`
+  * :prop_tgt:`ANDROID_ASSETS_DIRECTORIES`
+  * :prop_tgt:`ANDROID_JAR_DEPENDENCIES`
+  * :prop_tgt:`ANDROID_JAR_DIRECTORIES`
+  * :prop_tgt:`ANDROID_JAVA_SOURCE_DIR`
+  * :prop_tgt:`ANDROID_NATIVE_LIB_DEPENDENCIES`
+  * :prop_tgt:`ANDROID_NATIVE_LIB_DIRECTORIES`
+  * :prop_tgt:`ANDROID_PROCESS_MAX`
+  * :prop_tgt:`ANDROID_PROGUARD`
+  * :prop_tgt:`ANDROID_PROGUARD_CONFIG_PATH`
+  * :prop_tgt:`ANDROID_SECURE_PROPS_PATH`
+  * :prop_tgt:`ANDROID_SKIP_ANT_STEP`
+  * :prop_tgt:`ANDROID_STL_TYPE`
+
+* The :prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY`,
+  :prop_tgt:`LIBRARY_OUTPUT_DIRECTORY`, and
+  :prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` target properties learned to
+  support :manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+* The :prop_tgt:`SOURCE_DIR` and :prop_tgt:`BINARY_DIR` target properties
+  were introduced to allow project code to query where a target is defined.
+
+* The :prop_tgt:`OUTPUT_NAME` target property and its variants learned to
+  support :manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+* A :prop_gbl:`TARGET_MESSAGES` global property was added to tell the
+  :ref:`Makefile Generators` whether to generate commands to print output
+  after each target is completed.
+
+* On Windows with MS-compatible tools, CMake learned to optionally
+  generate a module definition (``.def``) file for ``SHARED`` libraries.
+  See the :prop_tgt:`WINDOWS_EXPORT_ALL_SYMBOLS` target property.
+
+Modules
+-------
+
+* The :module:`ExternalProject` module :command:`ExternalProject_Add`
+  function ``GIT_SUBMODULES`` option now also limits the set of
+  submodules that are initialized in addition to the prior behavior
+  of limiting the set of submodules that are updated.
+
+* The :module:`ExternalProject` module learned new ``USES_TERMINAL``
+  arguments for giving steps exclusive terminal access.  This is
+  useful with the :generator:`Ninja` generator to monitor CMake
+  superbuild progress and prevent CPU oversubscription.
+
+* The :module:`FindBISON` module ``BISON_TARGET`` macro learned a
+  new ``DEFINES_FILE`` option to specify a custom output header
+  to be generated.
+
+* The :module:`FindHDF5` module learend a new ``HDF5_PREFER_PARALLEL``
+  option allowing users to specify that a parallel HDF5 tool is
+  preferred if both are available.
+
+* The :module:`FindIce` module now provides imported targets.
+
+* The :module:`FindJava` module learned to optionally find
+  the ``idlj`` and ``jarsigner`` tools.
+
+* The :module:`FindOpenSSL` module now provides imported targets.
+
+* The :module:`FindOpenSSL` module learned a new ``OPENSSL_USE_STATIC_LIBS``
+  option to search only for static libraries.
+
+* The :module:`FindPkgConfig` learned a new :command:`pkg_get_variable`
+  command which may be used to query for arbitrary variables from a package
+  (such as for related tools or data and plugin install paths).
+
+* The :module:`FindProtobuf` module gained a new
+  :command:`protobuf_generate_python` function to generate python
+  sources from ``.proto`` files.
+
+* The :module:`FindTIFF` module learned to search separately for
+  debug and release variants.
+
+* The :module:`FindwxWidgets` module learned to support version requests.
+
+* The :module:`FindXercesC` module learned to search separately for
+  debug and release variants.
+
+* The :module:`FindZLIB` module learned to search separately for
+  debug and release variants.
+
+* The :module:`GNUInstallDirs` module learned special default values
+  for certain installation prefixes according to the `GNU Coding
+  Standards`_ and the `Filesystem Hierarchy Standard`_.
+
+* The :module:`UseJava` module ``add_jar`` function learned
+  to support response files (e.g. ``@srcs.txt``) for source
+  specification.
+
+* The :module:`UseJava` module ``install_jar`` function learned
+  new ``DESTINATION`` and ``COMPONENT`` options to specify
+  the corresponding :command:`install` command options.
+
+* The :module:`UseJava` module gained a new ``create_javah``
+  function to create C headers from Java classes.
+
+.. _`GNU Coding Standards`: https://www.gnu.org/prep/standards/html_node/Directory-Variables.html
+.. _`Filesystem Hierarchy Standard`: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html
+
+Generator Expressions
+---------------------
+
+* A new ``$<SHELL_PATH:...>``
+  :manual:`generator expression <cmake-generator-expressions(7)>`
+  has been added.
+
+CTest
+-----
+
+* CTest learned to optionally measure the CPU load during parallel
+  testing and avoid starting tests that may cause the load to exceed
+  a given threshold.  See the :manual:`ctest(1)` command ``--test-load``
+  option, the ``TestLoad`` setting of the :ref:`CTest Test Step`,
+  the :variable:`CTEST_TEST_LOAD` variable, and the ``TEST_LOAD``
+  option of the :command:`ctest_test` command.
+
+* :manual:`ctest(1)` learned options
+  ``--test-output-size-passed`` and ``--test-output-size-failed``
+  to customize the limit on test output size submitted when
+  running as a :ref:`Dashboard Client`.
+
+CPack
+-----
+
+* The :module:`CPackDeb` module learned to set package dependencies
+  per component.  See variables:
+
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_BREAKS`
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_CONFLICTS`
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_ENHANCES`
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_PREDEPENDS`
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_PROVIDES`
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_RECOMMENDS`
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_REPLACES`
+  * :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_SUGGESTS`
+
+* The :module:`CPack` module learned to package empty directories.
+
+* The :module:`CPack` module gained a new setting, ``CPACK_VERBATIM_VARIABLES``,
+  which can be used to ensure the cpack program receives the settings' values
+  exactly as they were set, even if they contain CMake-special characters.
+  For compatibility, it's off by default.
+
+Other
+-----
+
+* The :manual:`Compile Features <cmake-compile-features(7)>` functionality
+  is now aware of features supported by GNU C compilers on Windows.
+
+* CMake learned to honor ``*.manifest`` source files with MSVC tools.
+  Manifest files named as sources of ``.exe`` and ``.dll`` targets
+  will be merged with linker-generated manifests and embedded in the
+  binary.
+
+* The `Concurrent Fortran 77 <https://ccur.com>`__ compiler is now supported.
+  Its :variable:`compiler id <CMAKE_<LANG>_COMPILER_ID>` is ``CCur``.
+
+* :manual:`cmake(1)` gained a new ``--trace-expand`` command line option
+  that is like ``--trace`` but expands variable references in the output.
+
+Deprecated and Removed Features
+===============================
+
+* The :module:`CMakeExpandImportedTargets` module is now documented
+  as deprecated.  See module documentation for an explanation.
+
+* The :variable:`CMAKE_USE_RELATIVE_PATHS` variable no longer has any
+  effect.  Previously it was partially implemented and unreliable.
+
+Other Changes
+=============
+
+* The :module:`CheckFunctionExists`, :module:`CheckLibraryExists`,
+  :module:`CheckSymbolExists`, and :module:`FindThreads` modules learned to
+  work in environments where only CXX is enabled.
+
+* The :module:`CPackDeb` module now correctly excludes symlinks during package
+  checksum calculation.
+
+* The :module:`CPackDeb` no longer uses fakeroot and system tar program for
+  packaging.
+
+* The :module:`CPack` module no longer mangles settings with CMake-special
+  characters when they're used as defaults for other settings. The macro
+  ``cpack_set_if_not_set``, which was responsible for this, is now deprecated.
+
+* CMake no longer links executables with flags to export symbols
+  unless the :prop_tgt:`ENABLE_EXPORTS` target property is set.
+  See policy :policy:`CMP0065`.
+
+* The ``SONAME`` field is no longer set for ``MODULE`` libraries
+  created with the :command:`add_library` command.  ``MODULE``
+  libraries are meant for explicit dynamic loading at runtime.
+  They cannot be linked so ``SONAME`` is not useful.
+
+* The internal :variable:`CMAKE_<LANG>_COMPILE_OBJECT` rule variable now
+  substitutes compiler include flags in a separate ``<INCLUDES>`` placeholder
+  instead of the main ``<FLAGS>`` placeholder.
diff --git a/share/cmake-3.6/Help/release/3.5.rst b/share/cmake-3.6/Help/release/3.5.rst
new file mode 100644
index 0000000..009eb3c
--- /dev/null
+++ b/share/cmake-3.6/Help/release/3.5.rst
@@ -0,0 +1,185 @@
+CMake 3.5 Release Notes
+***********************
+
+.. only:: html
+
+  .. contents::
+
+Changes made since CMake 3.4 include the following.
+
+New Features
+============
+
+GUI
+---
+
+* The :manual:`cmake-gui(1)` gained options to control warnings about
+  deprecated functionality.
+
+* The :manual:`cmake-gui(1)` learned an option to set the toolset
+  to be used with VS IDE and Xcode generators, much like the
+  existing ``-T`` option to :manual:`cmake(1)`.
+
+* The :manual:`cmake-gui(1)` gained a Regular Expression Explorer which
+  may be used to create and evaluate regular expressions in real-time.
+  The explorer window is available via the ``Tools`` menu.
+
+Command-Line
+------------
+
+* The ``-Wdev`` and ``-Wno-dev`` :manual:`cmake(1)` options now also enable
+  and suppress the deprecated warnings output by default.
+
+* The suppression of developer warnings as errors can now be controlled with
+  the new ``-Werror=dev`` and ``-Wno-error=dev`` :manual:`cmake(1)` options.
+
+* The :manual:`cmake(1)` ``-E`` command-line tools ``copy``,
+  ``copy_if_different``, ``copy_directory``, and ``make_directory``
+  learned to support multiple input files or directories.
+
+Commands
+--------
+
+* The :command:`cmake_parse_arguments` command is now implemented natively.
+  The :module:`CMakeParseArguments` module remains as an empty placeholder
+  for compatibility.
+
+* The :command:`install(DIRECTORY)` command learned to support
+  :manual:`generator expressions <cmake-generator-expressions(7)>`
+  in the list of directories.
+
+Variables
+---------
+
+* The :variable:`CMAKE_ERROR_DEPRECATED` variable can now be set using the
+  ``-Werror=deprecated`` and ``-Wno-error=deprecated`` :manual:`cmake(1)`
+  options.
+
+* The :variable:`CMAKE_WARN_DEPRECATED` variable can now be set using the
+  ``-Wdeprecated`` and ``-Wno-deprecated`` :manual:`cmake(1)` options.
+
+Properties
+----------
+
+* The :prop_tgt:`VS_GLOBAL_<variable>` target property is now implemented
+  for VS 2010 and above.  Previously it worked only in VS 2008 and below.
+
+Modules
+-------
+
+* The :module:`ExternalProject` module learned a new ``GIT_REMOTE_NAME``
+  option to control the ``git clone --origin`` value.
+
+* The :module:`FindBoost` module now provides imported targets
+  such as ``Boost::boost`` and ``Boost::filesystem``.
+
+* The :module:`FindFLEX` module ``FLEX_TARGET`` macro learned a
+  new ``DEFINES_FILE`` option to specify a custom output header
+  to be generated.
+
+* The :module:`FindGTest` module now provides imported targets.
+
+* The :module:`FindGTK2` module, when ``GTK2_USE_IMPORTED_TARGETS`` is
+  enabled, now sets ``GTK2_LIBRARIES`` to contain the list of imported
+  targets instead of the paths to the libraries.  Moreover it now sets
+  a new ``GTK2_TARGETS`` variable containing all the targets imported.
+
+* The :module:`FindOpenMP` module learned to support Clang.
+
+* The :module:`FindOpenSSL` module gained a new
+  ``OPENSSL_MSVC_STATIC_RT`` option to search for libraries using
+  the MSVC static runtime.
+
+* The :module:`FindPNG` module now provides imported targets.
+
+* The :module:`FindTIFF` module now provides imported targets.
+
+* A :module:`FindXalanC` module was introduced to find the
+  Apache Xalan-C++ XSL transform processing library.
+
+* The :module:`FindXercesC` module now provides imported targets.
+
+Platforms
+---------
+
+* Support was added for the ARM Compiler (arm.com) with compiler id ``ARMCC``.
+
+* A new platform file for cross-compiling in the Cray Linux Environment to
+  target compute nodes was added.  See
+  :ref:`Cross Compiling for the Cray Linux Environment <Cray Cross-Compile>`
+  for usage details.
+
+* The :manual:`Compile Features <cmake-compile-features(7)>` functionality
+  is now aware of features supported by Clang compilers on Windows (MinGW).
+
+* When building for embedded Apple platforms like iOS CMake learned to build and
+  install combined targets which contain both a device and a simulator build.
+  This behavior can be enabled by setting the :prop_tgt:`IOS_INSTALL_COMBINED`
+  target property.
+
+CPack
+-----
+
+* The :module:`CPackDMG` module learned new variable to specify AppleScript
+  file run to customize appearance of ``DragNDrop`` installer folder,
+  including background image setting using supplied PNG or multi-resolution
+  TIFF file.  See the :variable:`CPACK_DMG_DS_STORE_SETUP_SCRIPT` and
+  :variable:`CPACK_DMG_BACKGROUND_IMAGE` variables.
+
+* The :module:`CPackDeb` module learned to set the optional config
+  file ``Source`` field using a monolithic or per-component variable.
+  See :variable:`CPACK_DEBIAN_PACKAGE_SOURCE`.
+
+* The :module:`CPackDeb` module learned to set Package, Section
+  and Priority control fields per-component.
+  See variables :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_SECTION` and
+  :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_PRIORITY`.
+
+* The :module:`CPack DragNDrop generator <CPackDMG>` learned to add
+  multi-lingual SLAs to a DMG which is presented to the user when they try to
+  mount the DMG.  See the :variable:`CPACK_DMG_SLA_LANGUAGES` and
+  :variable:`CPACK_DMG_SLA_DIR` variables for details.
+
+* The :module:`CPackNSIS` module learned new variables to add bitmaps to the
+  installer.  See the :variable:`CPACK_NSIS_MUI_WELCOMEFINISHPAGE_BITMAP`
+  and :variable:`CPACK_NSIS_MUI_UNWELCOMEFINISHPAGE_BITMAP` variables.
+
+* The :module:`CPackRPM` module learned to set Name and Group
+  control fields per-component.
+  See :variable:`CPACK_RPM_<component>_PACKAGE_NAME`
+  and :variable:`CPACK_RPM_<component>_PACKAGE_GROUP`.
+
+Other
+-----
+
+* Warnings about deprecated functionality are now enabled by default.
+  They may be suppressed with ``-Wno-deprecated`` or by setting the
+  :variable:`CMAKE_WARN_DEPRECATED` variable to false.
+
+Deprecated and Removed Features
+===============================
+
+* The :manual:`cmake(1)` ``-E time`` command now properly passes arguments
+  with spaces or special characters through to the child process.  This
+  may break scripts that worked around the bug with their own extra
+  quoting or escaping.
+
+* The :generator:`Xcode` generator was fixed to escape backslashes in
+  strings consistently with other generators.  Projects that previously
+  worked around the inconsistecy with an extra level of backslashes
+  conditioned on the Xcode generator must be updated to remove the
+  workaround for CMake 3.5 and greater.
+
+Other Changes
+=============
+
+* The :generator:`Visual Studio 14 2015` generator learned to map the
+  ``/debug:fastlink`` linker flag to the ``.vcxproj`` file property.
+
+* The :module:`FindGTK2` module now configures the ``GTK2::sigc++`` imported
+  target to enable c++11 on its dependents when using sigc++ 2.5.1 or higher.
+
+* The precompiled Windows binary provided on ``cmake.org`` is now a
+  ``.msi`` package instead of an installer executable.  One may need
+  to manually uninstall CMake versions lower than 3.5 before installing
+  the new package.
diff --git a/share/cmake-3.6/Help/release/3.6.rst b/share/cmake-3.6/Help/release/3.6.rst
new file mode 100644
index 0000000..5c08b39
--- /dev/null
+++ b/share/cmake-3.6/Help/release/3.6.rst
@@ -0,0 +1,315 @@
+CMake 3.6 Release Notes
+***********************
+
+.. only:: html
+
+  .. contents::
+
+Changes made since CMake 3.5 include the following.
+
+New Features
+============
+
+Generators
+----------
+
+* The :generator:`Ninja` generator learned to produce phony targets
+  of the form ``sub/dir/all`` to drive the build of a subdirectory.
+  This is equivalent to ``cd sub/dir; make all`` with
+  :ref:`Makefile Generators`.
+
+* The :generator:`Ninja` generator now includes system header files in build
+  dependencies to ensure correct re-builds when system packages are updated.
+
+* The :generator:`Visual Studio 14 2015` generator learned to support the
+  Clang/C2 toolsets, e.g. with the ``-T v140_clang_3_7`` option.
+  This feature is experimental.
+
+Commands
+--------
+
+* The :command:`add_custom_command` and :command:`add_custom_target` commands
+  learned how to use the :prop_tgt:`CROSSCOMPILING_EMULATOR` executable
+  target property.
+
+* The :command:`install` command learned a new ``EXCLUDE_FROM_ALL`` option
+  to leave installation rules out of the default installation.
+
+* The :command:`list` command gained a ``FILTER`` sub-command to filter
+  list elements by regular expression.
+
+* The :command:`string(TIMESTAMP)` and :command:`file(TIMESTAMP)`
+  commands gained support for the ``%s`` placeholder.  This is
+  the number of seconds since the UNIX Epoch.
+
+* The :command:`try_compile` command source file signature now honors
+  configuration-specific flags (e.g. :variable:`CMAKE_<LANG>_FLAGS_DEBUG`)
+  in the generated test project.  Previously only the default such flags
+  for the current toolchain were used.
+
+Variables
+---------
+
+* A :variable:`CMAKE_DEPENDS_IN_PROJECT_ONLY` variable was introduced
+  to tell :ref:`Makefile Generators` to limit dependency scanning only
+  to files in the project source and build trees.
+
+* A new :variable:`CMAKE_HOST_SOLARIS` variable was introduced to
+  indicate when CMake is running on an Oracle Solaris host.
+
+* A :variable:`CMAKE_<LANG>_STANDARD_INCLUDE_DIRECTORIES` variable was
+  added for use by toolchain files to specify system include directories
+  to be appended to all compiler command lines.
+
+* The :variable:`CMAKE_<LANG>_STANDARD_LIBRARIES` variable is now documented.
+  It is intended for use by toolchain files to specify system libraries to be
+  added to all linker command lines.
+
+* A :variable:`CMAKE_NINJA_OUTPUT_PATH_PREFIX` variable was introduced
+  to tell the :generator:`Ninja` generator to configure the generated
+  ``build.ninja`` file for use as a ``subninja``.
+
+* A :variable:`CMAKE_TRY_COMPILE_PLATFORM_VARIABLES` variable was
+  added for use by toolchain files to specify platform-specific
+  variables that must be propagated by the :command:`try_compile`
+  command into test projects.
+
+* A :variable:`CMAKE_TRY_COMPILE_TARGET_TYPE` variable was added
+  to optionally tell the :command:`try_compile` command to build
+  a static library instead of an executable.  This is useful for
+  cross-compiling toolchains that cannot link binaries without
+  custom flags or scripts.
+
+Properties
+----------
+
+* A :prop_tgt:`DEPLOYMENT_REMOTE_DIRECTORY` target property was introduced
+  to tell the :generator:`Visual Studio 9 2008` and
+  :generator:`Visual Studio 8 2005` generators to generate the "remote
+  directory" for WinCE project deployment and debugger settings.
+
+* A :prop_tgt:`<LANG>_CLANG_TIDY` target property and supporting
+  :variable:`CMAKE_<LANG>_CLANG_TIDY` variable were introduced to tell the
+  :ref:`Makefile Generators` and the :generator:`Ninja` generator to run
+  ``clang-tidy`` along with the compiler for ``C`` and ``CXX`` languages.
+
+* A :prop_test:`TIMEOUT_AFTER_MATCH` test property was introduced to
+  optionally tell CTest to enforce a secondary timeout after matching
+  certain output from a test.
+
+* A :prop_tgt:`VS_CONFIGURATION_TYPE` target property was introduced
+  to specify a custom project file type for :ref:`Visual Studio Generators`
+  supporting VS 2010 and above.
+
+* A :prop_dir:`VS_STARTUP_PROJECT` directory property was introduced
+  to specify for :ref:`Visual Studio Generators` the default startup
+  project for generated solutions (``.sln`` files).
+
+Modules
+-------
+
+* The :module:`CMakePushCheckState` module now pushes/pops/resets the variable
+  ``CMAKE_EXTRA_INCLUDE_FILE`` used in :module:`CheckTypeSize`.
+
+* The :module:`ExternalProject` module leared the ``GIT_SHALLOW 1``
+  option to perform a shallow clone of a Git repository.
+
+* The :module:`ExternalProject` module learned to initialize Git submodules
+  recursively and also to initialize new submodules on updates.  Use the
+  ``GIT_SUBMODULES`` option to restrict which submodules are initalized and
+  updated.
+
+* The :module:`ExternalProject` module leared the ``DOWNLOAD_NO_EXTRACT 1``
+  argument to skip extracting the file that is downloaded (e.g., for
+  self-extracting shell installers or ``.msi`` files).
+
+* The :module:`ExternalProject` module now uses ``TLS_VERIFY`` when fetching
+  from git repositories.
+
+* The :module:`FindBLAS` and :module:`FindLAPACK` modules learned to
+  support `OpenBLAS <http://www.openblas.net>`__.
+
+* The :module:`FindCUDA` module learned to find the ``cublas_device`` library.
+
+* The :module:`FindGTest` module ``gtest_add_tests`` function now causes
+  CMake to automatically re-run when test sources change so that they
+  can be re-scanned.
+
+* The :module:`FindLTTngUST` module was introduced to find the LTTng-UST
+  library.
+
+* The :module:`FindPkgConfig` module learned to optionally create imported
+  targets for the libraries it has found.
+
+* The :module:`FindProtobuf` module learned to provide a ``Protobuf_VERSION``
+  variable and check the version number requested in a :command:`find_package`
+  call.
+
+* The :module:`InstallRequiredSystemLibraries` module learned a new
+  ``CMAKE_INSTALL_UCRT_LIBRARIES`` option to enable app-local deployment
+  of the Windows Universal CRT libraries with Visual Studio 2015.
+
+Platforms
+---------
+
+* The Clang compiler is now supported on CYGWIN.
+
+* Support was added for the Bruce C Compiler with compiler id ``Bruce``.
+
+CTest
+-----
+
+* The :command:`ctest_update` command now looks at the
+  :variable:`CTEST_GIT_INIT_SUBMODULES` variable to determine whether
+  submodules should be updated or not before updating.
+
+* The :command:`ctest_update` command will now synchronize submodules on an
+  update. Updates which add submodules or change a submodule's URL will now be
+  pulled properly.
+
+CPack
+-----
+
+* The :module:`CPackDeb` module learned how to handle ``$ORIGIN``
+  in ``CMAKE_INSTALL_RPATH`` when :variable:`CPACK_DEBIAN_PACKAGE_SHLIBDEPS`
+  is used for dependency auto detection.
+
+* The :module:`CPackDeb` module learned how to generate ``DEBIAN/shlibs``
+  contorl file when package contains shared libraries.
+
+* The :module:`CPackDeb` module learned how to generate ``DEBIAN/postinst`` and
+  ``DEBIAN/postrm`` files if the package installs libraries in
+  ldconfig-controlled locations (e.g. ``/lib/``, ``/usr/lib/``).
+
+* The :module:`CPackDeb` module learned how to generate dependencies between
+  Debian packages if multi-component setup is used and
+  :variable:`CPACK_COMPONENT_<compName>_DEPENDS` variables are set.
+  For backward compatibility this feature is disabled by default.
+  See :variable:`CPACK_DEBIAN_ENABLE_COMPONENT_DEPENDS`.
+
+* The :module:`CPackDeb` module learned how to set custom package file names
+  including how to generate properly-named Debian packages::
+
+    <PackageName>_<VersionNumber>-<DebianRevisionNumber>_<DebianArchitecture>.deb
+
+  For backward compatibility this feature is disabled by default. See
+  :variable:`CPACK_DEBIAN_FILE_NAME` and
+  :variable:`CPACK_DEBIAN_<COMPONENT>_FILE_NAME`.
+
+* The :module:`CPackDeb` module learned how to set the package release number
+  (``DebianRevisionNumber`` in package file name when used in combination with
+  ``DEB-DEFAULT`` value set by :variable:`CPACK_DEBIAN_FILE_NAME`).  See
+  :variable:`CPACK_DEBIAN_PACKAGE_RELEASE`.
+
+* The :module:`CPackDeb` module learned how to set the package architecture
+  per-component.  See :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_ARCHITECTURE`.
+
+* The :module:`CPackDMG` module learned a new option to tell the CPack
+  ``DragNDrop`` generaor to skip the ``/Applications`` symlink.
+  See the :variable:`CPACK_DMG_DISABLE_APPLICATIONS_SYMLINK` variable.
+
+* The :module:`CPackIFW` module gained a new
+  :command:`cpack_ifw_update_repository` command to update a QtIFW-specific
+  repository from a remote repository.
+
+* The :module:`CPackRPM` module learned how to set RPM ``dist`` tag as part of
+  RPM ``Release:`` tag when enabled (mandatory on some Linux distributions for
+  e.g. on Fedora).
+  See :variable:`CPACK_RPM_PACKAGE_RELEASE_DIST`.
+
+* The :module:`CPackRPM` module learned how to set default values for owning
+  user/group and file/directory permissions of package content.
+  See :variable:`CPACK_RPM_DEFAULT_USER`, :variable:`CPACK_RPM_DEFAULT_GROUP`,
+  :variable:`CPACK_RPM_DEFAULT_FILE_PERMISSIONS`,
+  :variable:`CPACK_RPM_DEFAULT_DIR_PERMISSIONS` and their per component
+  counterparts.
+
+* The :module:`CPackRPM` module learned how to set user defined package file
+  names, how to specify that rpmbuild should decide on file name format as
+  well as handling of multiple rpm packages generated by a single user defined
+  spec file.
+  See :variable:`CPACK_RPM_PACKAGE_NAME` and
+  :variable:`CPACK_RPM_<component>_PACKAGE_NAME`.
+
+* The :module:`CPackRPM` module learned how to correctly handle symlinks
+  that are pointing outside generated packages.
+
+Other
+-----
+
+* The :manual:`Compile Features <cmake-compile-features(7)>` functionality
+  is now aware of features supported by Intel C++ compilers versions 12.1
+  through 16.0 on UNIX platforms.
+
+Deprecated and Removed Features
+===============================
+
+* The :module:`CMakeForceCompiler` module and its macros are now deprecated.
+  See module documentation for an explanation.
+
+* The :command:`find_library`, :command:`find_path`, and :command:`find_file`
+  commands no longer search in installation prefixes derived from the ``PATH``
+  environment variable on non-Windows platforms.  This behavior was added in
+  CMake 3.3 to support Windows hosts but has proven problematic on UNIX hosts.
+  Users that keep some ``<prefix>/bin`` directories in the ``PATH`` just for
+  their tools do not necessarily want any supporting ``<prefix>/lib``
+  directories searched.  One may set the ``CMAKE_PREFIX_PATH`` environment
+  variable with a :ref:`;-list <CMake Language Lists>` of prefixes that are
+  to be searched.
+
+* The :generator:`Visual Studio 7 .NET 2003` generator is now
+  deprecated and will be removed in a future version of CMake.
+
+* The :generator:`Visual Studio 7` generator (for VS .NET 2002) has been
+  removed.  It had been deprecated since CMake 3.3.
+
+* The :generator:`Visual Studio 6` generator has been removed.
+  It had been deprecated since CMake 3.3.
+
+Other Changes
+=============
+
+* The precompiled OS X binary provided on ``cmake.org`` now requires
+  OS X 10.7 or newer.
+
+* On Linux and FreeBSD platforms, when building CMake itself from source and
+  not using a system-provided libcurl, OpenSSL is now used by default if it is
+  found on the system.  This enables SSL/TLS support for commands supporting
+  network communication via ``https``, such as :command:`file(DOWNLOAD)`,
+  :command:`file(UPLOAD)`, and :command:`ctest_submit`.
+
+* The :manual:`cmake(1)` ``--build`` command-line tool now rejects multiple
+  ``--target`` options with an error instead of silently ignoring all but the
+  last one.
+
+* :prop_tgt:`AUTOMOC` now diagnoses name collisions when multiple source
+  files in different directories use ``#include <moc_foo.cpp>`` with the
+  same name (because the generated ``moc_foo.cpp`` files would collide).
+
+* The :module:`FindBISON` module ``BISON_TARGET`` macro now supports
+  special characters by passing the ``VERBATIM`` option to internal
+  :command:`add_custom_command` calls.  This may break clients that
+  added escaping manually to work around the bug.
+
+* The :module:`FindFLEX` module ``FLEX_TARGET`` macro now supports
+  special characters by passing the ``VERBATIM`` option to internal
+  :command:`add_custom_command` calls.  This may break clients that
+  added escaping manually to work around the bug.
+
+* The :module:`FindProtobuf` module input and output variables were all renamed
+  from ``PROTOBUF_`` to ``Protobuf_`` for consistency with other find modules.
+  Input variables of the old case will be honored if provided, and output
+  variables of the old case are always provided.
+
+* The :module:`CPackRPM` module now supports upper cased component
+  names in per component CPackRPM specific variables.
+  E.g. component named ``foo`` now expects component specific
+  variable to be ``CPACK_RPM_FOO_PACKAGE_NAME`` while before
+  it expected ``CPACK_RPM_foo_PACKAGE_NAME``.
+  Upper cased component name part in variables is compatible
+  with convention used for other CPack variables.
+  For back compatibility old format of variables is still valid
+  and preferred if both versions of variable are set, but the
+  preferred future use is upper cased component names in variables.
+  New variables that will be added to CPackRPM in later versions
+  will only support upper cased component variable format.
diff --git a/share/cmake-3.2/Help/release/dev.txt b/share/cmake-3.6/Help/release/dev.txt
similarity index 100%
rename from share/cmake-3.2/Help/release/dev.txt
rename to share/cmake-3.6/Help/release/dev.txt
diff --git a/share/cmake-3.6/Help/release/index.rst b/share/cmake-3.6/Help/release/index.rst
new file mode 100644
index 0000000..92c3b63
--- /dev/null
+++ b/share/cmake-3.6/Help/release/index.rst
@@ -0,0 +1,20 @@
+CMake Release Notes
+*******************
+
+..
+  This file should include the adjacent "dev.txt" file
+  in development versions but not in release versions.
+
+Releases
+========
+
+.. toctree::
+   :maxdepth: 1
+
+   3.6 <3.6>
+   3.5 <3.5>
+   3.4 <3.4>
+   3.3 <3.3>
+   3.2 <3.2>
+   3.1 <3.1>
+   3.0 <3.0>
diff --git a/share/cmake-3.6/Help/variable/APPLE.rst b/share/cmake-3.6/Help/variable/APPLE.rst
new file mode 100644
index 0000000..75eecf1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/APPLE.rst
@@ -0,0 +1,6 @@
+APPLE
+-----
+
+``True`` if running on OS X.
+
+Set to ``true`` on OS X.
diff --git a/share/cmake-3.6/Help/variable/BORLAND.rst b/share/cmake-3.6/Help/variable/BORLAND.rst
new file mode 100644
index 0000000..badb733
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/BORLAND.rst
@@ -0,0 +1,6 @@
+BORLAND
+-------
+
+``True`` if the Borland compiler is being used.
+
+This is set to ``true`` if the Borland compiler is being used.
diff --git a/share/cmake-3.6/Help/variable/BUILD_SHARED_LIBS.rst b/share/cmake-3.6/Help/variable/BUILD_SHARED_LIBS.rst
new file mode 100644
index 0000000..53087b2
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/BUILD_SHARED_LIBS.rst
@@ -0,0 +1,10 @@
+BUILD_SHARED_LIBS
+-----------------
+
+Global flag to cause :command:`add_library` to create shared libraries if on.
+
+If present and true, this will cause all libraries to be built shared
+unless the library was explicitly added as a static library.  This
+variable is often added to projects as an :command:`option` so that each user
+of a project can decide if they want to build the project using shared or
+static libraries.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ABSOLUTE_DESTINATION_FILES.rst b/share/cmake-3.6/Help/variable/CMAKE_ABSOLUTE_DESTINATION_FILES.rst
new file mode 100644
index 0000000..b6d0054
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ABSOLUTE_DESTINATION_FILES.rst
@@ -0,0 +1,9 @@
+CMAKE_ABSOLUTE_DESTINATION_FILES
+--------------------------------
+
+List of files which have been installed using an ``ABSOLUTE DESTINATION`` path.
+
+This variable is defined by CMake-generated ``cmake_install.cmake``
+scripts.  It can be used (read-only) by programs or scripts that
+source those install scripts.  This is used by some CPack generators
+(e.g.  RPM).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS.rst
new file mode 100644
index 0000000..8862ba9
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS
+------------------------------------
+
+Default value for the :prop_tgt:`ANDROID_ANT_ADDITIONAL_OPTIONS` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ANDROID_API.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_API.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_ANDROID_API.rst
rename to share/cmake-3.6/Help/variable/CMAKE_ANDROID_API.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ANDROID_API_MIN.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_API_MIN.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_ANDROID_API_MIN.rst
rename to share/cmake-3.6/Help/variable/CMAKE_ANDROID_API_MIN.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ARCH.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ARCH.rst
new file mode 100644
index 0000000..8fbb46d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ARCH.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_ARCH
+------------------
+
+Default value for the :prop_tgt:`ANDROID_ARCH` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ASSETS_DIRECTORIES.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ASSETS_DIRECTORIES.rst
new file mode 100644
index 0000000..c372fe4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_ASSETS_DIRECTORIES.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_ASSETS_DIRECTORIES
+--------------------------------
+
+Default value for the :prop_tgt:`ANDROID_ASSETS_DIRECTORIES` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_ANDROID_GUI.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_GUI.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_ANDROID_GUI.rst
rename to share/cmake-3.6/Help/variable/CMAKE_ANDROID_GUI.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAR_DEPENDENCIES.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAR_DEPENDENCIES.rst
new file mode 100644
index 0000000..451a929
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAR_DEPENDENCIES.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_JAR_DEPENDENCIES
+------------------------------
+
+Default value for the :prop_tgt:`ANDROID_JAR_DEPENDENCIES` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAR_DIRECTORIES.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAR_DIRECTORIES.rst
new file mode 100644
index 0000000..af83e34
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAR_DIRECTORIES.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_JAR_DIRECTORIES
+-----------------------------
+
+Default value for the :prop_tgt:`ANDROID_JAR_DIRECTORIES` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAVA_SOURCE_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAVA_SOURCE_DIR.rst
new file mode 100644
index 0000000..3dc05e0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_JAVA_SOURCE_DIR.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_JAVA_SOURCE_DIR
+-----------------------------
+
+Default value for the :prop_tgt:`ANDROID_JAVA_SOURCE_DIR` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES.rst
new file mode 100644
index 0000000..4191907
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES
+-------------------------------------
+
+Default value for the :prop_tgt:`ANDROID_NATIVE_LIB_DEPENDENCIES` target
+property.  See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES.rst
new file mode 100644
index 0000000..7cb9527
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES
+------------------------------------
+
+Default value for the :prop_tgt:`ANDROID_NATIVE_LIB_DIRECTORIES` target
+property.  See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROCESS_MAX.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROCESS_MAX.rst
new file mode 100644
index 0000000..19fb527
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROCESS_MAX.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_PROCESS_MAX
+-------------------------
+
+Default value for the :prop_tgt:`ANDROID_PROCESS_MAX` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROGUARD.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROGUARD.rst
new file mode 100644
index 0000000..b8fdd46
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROGUARD.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_PROGUARD
+----------------------
+
+Default value for the :prop_tgt:`ANDROID_PROGUARD` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROGUARD_CONFIG_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROGUARD_CONFIG_PATH.rst
new file mode 100644
index 0000000..8dea009
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_PROGUARD_CONFIG_PATH.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_PROGUARD_CONFIG_PATH
+----------------------------------
+
+Default value for the :prop_tgt:`ANDROID_PROGUARD_CONFIG_PATH` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_SECURE_PROPS_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_SECURE_PROPS_PATH.rst
new file mode 100644
index 0000000..69a4d0b
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_SECURE_PROPS_PATH.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_SECURE_PROPS_PATH
+-------------------------------
+
+Default value for the :prop_tgt:`ANDROID_SECURE_PROPS_PATH` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_SKIP_ANT_STEP.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_SKIP_ANT_STEP.rst
new file mode 100644
index 0000000..0a96df9
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_SKIP_ANT_STEP.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_SKIP_ANT_STEP
+---------------------------
+
+Default value for the :prop_tgt:`ANDROID_SKIP_ANT_STEP` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ANDROID_STL_TYPE.rst b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_STL_TYPE.rst
new file mode 100644
index 0000000..766b2c8
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ANDROID_STL_TYPE.rst
@@ -0,0 +1,5 @@
+CMAKE_ANDROID_STL_TYPE
+----------------------
+
+Default value for the :prop_tgt:`ANDROID_STL_TYPE` target property.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_APPBUNDLE_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_APPBUNDLE_PATH.rst
new file mode 100644
index 0000000..2bc79ac
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_APPBUNDLE_PATH.rst
@@ -0,0 +1,6 @@
+CMAKE_APPBUNDLE_PATH
+--------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for OS X application bundles used by the :command:`find_program`, and
+:command:`find_package` commands.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AR.rst b/share/cmake-3.6/Help/variable/CMAKE_AR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_AR.rst
rename to share/cmake-3.6/Help/variable/CMAKE_AR.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY.rst
new file mode 100644
index 0000000..c889321
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY.rst
@@ -0,0 +1,9 @@
+CMAKE_ARCHIVE_OUTPUT_DIRECTORY
+------------------------------
+
+Where to put all the :ref:`ARCHIVE <Archive Output Artifacts>`
+target files when built.
+
+This variable is used to initialize the :prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY`
+property on all the targets.  See that target property for additional
+information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst
new file mode 100644
index 0000000..94c2b6e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ARCHIVE_OUTPUT_DIRECTORY_CONFIG.rst
@@ -0,0 +1,9 @@
+CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
+---------------------------------------
+
+Where to put all the :ref:`ARCHIVE <Archive Output Artifacts>`
+target files when built for a specific configuration.
+
+This variable is used to initialize the
+:prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>` property on all the targets.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ARGC.rst b/share/cmake-3.6/Help/variable/CMAKE_ARGC.rst
new file mode 100644
index 0000000..aec9711
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ARGC.rst
@@ -0,0 +1,8 @@
+CMAKE_ARGC
+----------
+
+Number of command line arguments passed to CMake in script mode.
+
+When run in :ref:`-P <CMake Options>` script mode, CMake sets this variable to
+the number of command line arguments.  See also :variable:`CMAKE_ARGV0`,
+``1``, ``2`` ...
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ARGV0.rst b/share/cmake-3.6/Help/variable/CMAKE_ARGV0.rst
new file mode 100644
index 0000000..8b1ecb7
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ARGV0.rst
@@ -0,0 +1,9 @@
+CMAKE_ARGV0
+-----------
+
+Command line argument passed to CMake in script mode.
+
+When run in :ref:`-P <CMake Options>` script mode, CMake sets this variable to
+the first command line argument.  It then also sets ``CMAKE_ARGV1``,
+``CMAKE_ARGV2``, ... and so on, up to the number of command line arguments
+given.  See also :variable:`CMAKE_ARGC`.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AUTOMOC.rst b/share/cmake-3.6/Help/variable/CMAKE_AUTOMOC.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_AUTOMOC.rst
rename to share/cmake-3.6/Help/variable/CMAKE_AUTOMOC.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AUTOMOC_MOC_OPTIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_AUTOMOC_MOC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_AUTOMOC_MOC_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_AUTOMOC_MOC_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_AUTOMOC_RELAXED_MODE.rst b/share/cmake-3.6/Help/variable/CMAKE_AUTOMOC_RELAXED_MODE.rst
new file mode 100644
index 0000000..addc62d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_AUTOMOC_RELAXED_MODE.rst
@@ -0,0 +1,13 @@
+CMAKE_AUTOMOC_RELAXED_MODE
+--------------------------
+
+Switch between strict and relaxed automoc mode.
+
+By default, :prop_tgt:`AUTOMOC` behaves exactly as described in the
+documentation of the :prop_tgt:`AUTOMOC` target property.  When set to
+``TRUE``, it accepts more input and tries to find the correct input file for
+``moc`` even if it differs from the documented behaviour.  In this mode it
+e.g.  also checks whether a header file is intended to be processed by moc
+when a ``"foo.moc"`` file has been included.
+
+Relaxed mode has to be enabled for KDE4 compatibility.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_AUTORCC.rst b/share/cmake-3.6/Help/variable/CMAKE_AUTORCC.rst
new file mode 100644
index 0000000..7426105
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_AUTORCC.rst
@@ -0,0 +1,7 @@
+CMAKE_AUTORCC
+-------------
+
+Whether to handle ``rcc`` automatically for Qt targets.
+
+This variable is used to initialize the :prop_tgt:`AUTORCC` property on all
+the targets.  See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AUTORCC_OPTIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_AUTORCC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_AUTORCC_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_AUTORCC_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_AUTOUIC.rst b/share/cmake-3.6/Help/variable/CMAKE_AUTOUIC.rst
new file mode 100644
index 0000000..5abefaa
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_AUTOUIC.rst
@@ -0,0 +1,7 @@
+CMAKE_AUTOUIC
+-------------
+
+Whether to handle ``uic`` automatically for Qt targets.
+
+This variable is used to initialize the :prop_tgt:`AUTOUIC` property on all
+the targets.  See that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_AUTOUIC_OPTIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_AUTOUIC_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_AUTOUIC_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_AUTOUIC_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_BACKWARDS_COMPATIBILITY.rst b/share/cmake-3.6/Help/variable/CMAKE_BACKWARDS_COMPATIBILITY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_BACKWARDS_COMPATIBILITY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_BACKWARDS_COMPATIBILITY.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_BINARY_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_BINARY_DIR.rst
new file mode 100644
index 0000000..3b323b7
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_BINARY_DIR.rst
@@ -0,0 +1,13 @@
+CMAKE_BINARY_DIR
+----------------
+
+The path to the top level of the build tree.
+
+This is the full path to the top level of the current CMake build
+tree.  For an in-source build, this would be the same as
+:variable:`CMAKE_SOURCE_DIR`.
+
+When run in -P script mode, CMake sets the variables
+:variable:`CMAKE_BINARY_DIR`, :variable:`CMAKE_SOURCE_DIR`,
+:variable:`CMAKE_CURRENT_BINARY_DIR` and
+:variable:`CMAKE_CURRENT_SOURCE_DIR` to the current working directory.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_BUILD_TOOL.rst b/share/cmake-3.6/Help/variable/CMAKE_BUILD_TOOL.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_BUILD_TOOL.rst
rename to share/cmake-3.6/Help/variable/CMAKE_BUILD_TOOL.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_BUILD_TYPE.rst b/share/cmake-3.6/Help/variable/CMAKE_BUILD_TYPE.rst
new file mode 100644
index 0000000..2d54d60
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_BUILD_TYPE.rst
@@ -0,0 +1,20 @@
+CMAKE_BUILD_TYPE
+----------------
+
+Specifies the build type on single-configuration generators.
+
+This statically specifies what build type (configuration) will be
+built in this build tree.  Possible values are empty, ``Debug``, ``Release``,
+``RelWithDebInfo`` and ``MinSizeRel``.  This variable is only meaningful to
+single-configuration generators (such as :ref:`Makefile Generators` and
+:generator:`Ninja`) i.e.  those which choose a single configuration when CMake
+runs to generate a build tree as opposed to multi-configuration generators
+which offer selection of the build configuration within the generated build
+environment.  There are many per-config properties and variables
+(usually following clean ``SOME_VAR_<CONFIG>`` order conventions), such as
+``CMAKE_C_FLAGS_<CONFIG>``, specified as uppercase:
+``CMAKE_C_FLAGS_[DEBUG|RELEASE|RELWITHDEBINFO|MINSIZEREL]``.  For example,
+in a build tree configured to build type ``Debug``, CMake will see to
+having :variable:`CMAKE_C_FLAGS_DEBUG <CMAKE_<LANG>_FLAGS_DEBUG>` settings get
+added to the :variable:`CMAKE_C_FLAGS <CMAKE_<LANG>_FLAGS>` settings.  See
+also :variable:`CMAKE_CONFIGURATION_TYPES`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_BUILD_WITH_INSTALL_RPATH.rst b/share/cmake-3.6/Help/variable/CMAKE_BUILD_WITH_INSTALL_RPATH.rst
new file mode 100644
index 0000000..5b59a6e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_BUILD_WITH_INSTALL_RPATH.rst
@@ -0,0 +1,11 @@
+CMAKE_BUILD_WITH_INSTALL_RPATH
+------------------------------
+
+Use the install path for the ``RPATH``.
+
+Normally CMake uses the build tree for the ``RPATH`` when building
+executables etc on systems that use ``RPATH``.  When the software is
+installed the executables etc are relinked by CMake to have the
+install ``RPATH``.  If this variable is set to true then the software is
+always built with the install path for the ``RPATH`` and does not need to
+be relinked when installed.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CACHEFILE_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_CACHEFILE_DIR.rst
new file mode 100644
index 0000000..8604d0e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CACHEFILE_DIR.rst
@@ -0,0 +1,7 @@
+CMAKE_CACHEFILE_DIR
+-------------------
+
+The directory with the ``CMakeCache.txt`` file.
+
+This is the full path to the directory that has the ``CMakeCache.txt``
+file in it.  This is the same as :variable:`CMAKE_BINARY_DIR`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CACHE_MAJOR_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_CACHE_MAJOR_VERSION.rst
new file mode 100644
index 0000000..1e53ed6
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CACHE_MAJOR_VERSION.rst
@@ -0,0 +1,8 @@
+CMAKE_CACHE_MAJOR_VERSION
+-------------------------
+
+Major version of CMake used to create the ``CMakeCache.txt`` file
+
+This stores the major version of CMake used to write a CMake cache
+file.  It is only different when a different version of CMake is run
+on a previously created cache file.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CACHE_MINOR_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_CACHE_MINOR_VERSION.rst
new file mode 100644
index 0000000..5d174a3
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CACHE_MINOR_VERSION.rst
@@ -0,0 +1,8 @@
+CMAKE_CACHE_MINOR_VERSION
+-------------------------
+
+Minor version of CMake used to create the ``CMakeCache.txt`` file
+
+This stores the minor version of CMake used to write a CMake cache
+file.  It is only different when a different version of CMake is run
+on a previously created cache file.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CACHE_PATCH_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_CACHE_PATCH_VERSION.rst
new file mode 100644
index 0000000..22d267c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CACHE_PATCH_VERSION.rst
@@ -0,0 +1,8 @@
+CMAKE_CACHE_PATCH_VERSION
+-------------------------
+
+Patch version of CMake used to create the ``CMakeCache.txt`` file
+
+This stores the patch version of CMake used to write a CMake cache
+file.  It is only different when a different version of CMake is run
+on a previously created cache file.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CFG_INTDIR.rst b/share/cmake-3.6/Help/variable/CMAKE_CFG_INTDIR.rst
new file mode 100644
index 0000000..ba25a35
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CFG_INTDIR.rst
@@ -0,0 +1,45 @@
+CMAKE_CFG_INTDIR
+----------------
+
+Build-time reference to per-configuration output subdirectory.
+
+For native build systems supporting multiple configurations in the
+build tree (such as :ref:`Visual Studio Generators` and :generator:`Xcode`),
+the value is a reference to a build-time variable specifying the name
+of the per-configuration output subdirectory.  On :ref:`Makefile Generators`
+this evaluates to `.` because there is only one configuration in a build tree.
+Example values:
+
+::
+
+  $(ConfigurationName) = Visual Studio 7, 8, 9
+  $(Configuration)     = Visual Studio 10
+  $(CONFIGURATION)     = Xcode
+  .                    = Make-based tools
+
+Since these values are evaluated by the native build system, this
+variable is suitable only for use in command lines that will be
+evaluated at build time.  Example of intended usage:
+
+::
+
+  add_executable(mytool mytool.c)
+  add_custom_command(
+    OUTPUT out.txt
+    COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool
+            ${CMAKE_CURRENT_SOURCE_DIR}/in.txt out.txt
+    DEPENDS mytool in.txt
+    )
+  add_custom_target(drive ALL DEPENDS out.txt)
+
+Note that ``CMAKE_CFG_INTDIR`` is no longer necessary for this purpose but
+has been left for compatibility with existing projects.  Instead
+:command:`add_custom_command` recognizes executable target names in its
+``COMMAND`` option, so
+``${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool`` can be replaced
+by just ``mytool``.
+
+This variable is read-only.  Setting it is undefined behavior.  In
+multi-configuration build systems the value of this variable is passed
+as the value of preprocessor symbol ``CMAKE_INTDIR`` to the compilation
+of all source files.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CL_64.rst b/share/cmake-3.6/Help/variable/CMAKE_CL_64.rst
new file mode 100644
index 0000000..a1e86a5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CL_64.rst
@@ -0,0 +1,6 @@
+CMAKE_CL_64
+-----------
+
+Using the 64-bit compiler from Microsoft
+
+Set to ``true`` when using the 64-bit ``cl`` compiler from Microsoft.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_COLOR_MAKEFILE.rst b/share/cmake-3.6/Help/variable/CMAKE_COLOR_MAKEFILE.rst
new file mode 100644
index 0000000..bb86ecc
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_COLOR_MAKEFILE.rst
@@ -0,0 +1,7 @@
+CMAKE_COLOR_MAKEFILE
+--------------------
+
+Enables color output when using the :ref:`Makefile Generators`.
+
+When enabled, the generated Makefiles will produce colored output.
+Default is ``ON``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_COMMAND.rst b/share/cmake-3.6/Help/variable/CMAKE_COMMAND.rst
new file mode 100644
index 0000000..f80b46c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_COMMAND.rst
@@ -0,0 +1,8 @@
+CMAKE_COMMAND
+-------------
+
+The full path to the :manual:`cmake(1)` executable.
+
+This is the full path to the CMake executable :manual:`cmake(1)` which is
+useful from custom commands that want to use the ``cmake -E`` option for
+portable system commands.  (e.g.  ``/usr/local/bin/cmake``)
diff --git a/share/cmake-3.2/Help/variable/CMAKE_COMPILER_2005.rst b/share/cmake-3.6/Help/variable/CMAKE_COMPILER_2005.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_COMPILER_2005.rst
rename to share/cmake-3.6/Help/variable/CMAKE_COMPILER_2005.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_COMPILER_IS_GNULANG.rst b/share/cmake-3.6/Help/variable/CMAKE_COMPILER_IS_GNULANG.rst
new file mode 100644
index 0000000..4b652c0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_COMPILER_IS_GNULANG.rst
@@ -0,0 +1,15 @@
+CMAKE_COMPILER_IS_GNU<LANG>
+---------------------------
+
+True if the compiler is GNU.
+
+If the selected ``<LANG>`` compiler is the GNU compiler then this is ``TRUE``,
+if not it is ``FALSE``.  Unlike the other per-language variables, this
+uses the GNU syntax for identifying languages instead of the CMake
+syntax.  Recognized values of the ``<LANG>`` suffix are:
+
+::
+
+  CC = C compiler
+  CXX = C++ compiler
+  G77 = Fortran compiler
diff --git a/share/cmake-3.2/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
rename to share/cmake-3.6/Help/variable/CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CONFIGURATION_TYPES.rst b/share/cmake-3.6/Help/variable/CMAKE_CONFIGURATION_TYPES.rst
new file mode 100644
index 0000000..34e99eb
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CONFIGURATION_TYPES.rst
@@ -0,0 +1,10 @@
+CMAKE_CONFIGURATION_TYPES
+-------------------------
+
+Specifies the available build types on multi-config generators.
+
+This specifies what build types (configurations) will be available
+such as ``Debug``, ``Release``, ``RelWithDebInfo`` etc.  This has reasonable
+defaults on most platforms, but can be extended to provide other build
+types.  See also :variable:`CMAKE_BUILD_TYPE` for details of managing
+configuration data, and :variable:`CMAKE_CFG_INTDIR`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CONFIG_POSTFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_CONFIG_POSTFIX.rst
new file mode 100644
index 0000000..e686a43
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CONFIG_POSTFIX.rst
@@ -0,0 +1,7 @@
+CMAKE_<CONFIG>_POSTFIX
+----------------------
+
+Default filename postfix for libraries under configuration ``<CONFIG>``.
+
+When a non-executable target is created its :prop_tgt:`<CONFIG>_POSTFIX`
+target property is initialized with the value of this variable if it is set.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CROSSCOMPILING.rst b/share/cmake-3.6/Help/variable/CMAKE_CROSSCOMPILING.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_CROSSCOMPILING.rst
rename to share/cmake-3.6/Help/variable/CMAKE_CROSSCOMPILING.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CROSSCOMPILING_EMULATOR.rst b/share/cmake-3.6/Help/variable/CMAKE_CROSSCOMPILING_EMULATOR.rst
new file mode 100644
index 0000000..95d2c7f
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CROSSCOMPILING_EMULATOR.rst
@@ -0,0 +1,12 @@
+CMAKE_CROSSCOMPILING_EMULATOR
+-----------------------------
+
+This variable is only used when :variable:`CMAKE_CROSSCOMPILING` is on. It
+should point to a command on the host system that can run executable built
+for the target system.
+
+The command will be used to run :command:`try_run` generated executables,
+which avoids manual population of the TryRunResults.cmake file.
+
+It is also used as the default value for the
+:prop_tgt:`CROSSCOMPILING_EMULATOR` target property of executables.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CTEST_COMMAND.rst b/share/cmake-3.6/Help/variable/CMAKE_CTEST_COMMAND.rst
new file mode 100644
index 0000000..b2942e2
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CTEST_COMMAND.rst
@@ -0,0 +1,8 @@
+CMAKE_CTEST_COMMAND
+-------------------
+
+Full path to :manual:`ctest(1)` command installed with CMake.
+
+This is the full path to the CTest executable :manual:`ctest(1)` which is
+useful from custom commands that want to use the :manual:`cmake(1)` ``-E``
+option for portable system commands.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CURRENT_BINARY_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_BINARY_DIR.rst
new file mode 100644
index 0000000..40496b5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_BINARY_DIR.rst
@@ -0,0 +1,15 @@
+CMAKE_CURRENT_BINARY_DIR
+------------------------
+
+The path to the binary directory currently being processed.
+
+This the full path to the build directory that is currently being
+processed by cmake.  Each directory added by :command:`add_subdirectory` will
+create a binary directory in the build tree, and as it is being
+processed this variable will be set.  For in-source builds this is the
+current source directory being processed.
+
+When run in -P script mode, CMake sets the variables
+:variable:`CMAKE_BINARY_DIR`, :variable:`CMAKE_SOURCE_DIR`,
+:variable:`CMAKE_CURRENT_BINARY_DIR` and
+:variable:`CMAKE_CURRENT_SOURCE_DIR` to the current working directory.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_DIR.rst
new file mode 100644
index 0000000..ebc3ab9
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_DIR.rst
@@ -0,0 +1,17 @@
+CMAKE_CURRENT_LIST_DIR
+----------------------
+
+Full directory of the listfile currently being processed.
+
+As CMake processes the listfiles in your project this variable will
+always be set to the directory where the listfile which is currently
+being processed (:variable:`CMAKE_CURRENT_LIST_FILE`) is located.  The value
+has dynamic scope.  When CMake starts processing commands in a source file
+it sets this variable to the directory where this file is located.
+When CMake finishes processing commands from the file it restores the
+previous value.  Therefore the value of the variable inside a macro or
+function is the directory of the file invoking the bottom-most entry
+on the call stack, not the directory of the file containing the macro
+or function definition.
+
+See also :variable:`CMAKE_CURRENT_LIST_FILE`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_FILE.rst b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_FILE.rst
new file mode 100644
index 0000000..84b0eee
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_FILE.rst
@@ -0,0 +1,15 @@
+CMAKE_CURRENT_LIST_FILE
+-----------------------
+
+Full path to the listfile currently being processed.
+
+As CMake processes the listfiles in your project this variable will
+always be set to the one currently being processed.  The value has
+dynamic scope.  When CMake starts processing commands in a source file
+it sets this variable to the location of the file.  When CMake
+finishes processing commands from the file it restores the previous
+value.  Therefore the value of the variable inside a macro or function
+is the file invoking the bottom-most entry on the call stack, not the
+file containing the macro or function definition.
+
+See also :variable:`CMAKE_PARENT_LIST_FILE`.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_LINE.rst b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_LINE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_CURRENT_LIST_LINE.rst
rename to share/cmake-3.6/Help/variable/CMAKE_CURRENT_LIST_LINE.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CURRENT_SOURCE_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_SOURCE_DIR.rst
new file mode 100644
index 0000000..c1b755a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CURRENT_SOURCE_DIR.rst
@@ -0,0 +1,12 @@
+CMAKE_CURRENT_SOURCE_DIR
+------------------------
+
+The path to the source directory currently being processed.
+
+This the full path to the source directory that is currently being
+processed by cmake.
+
+When run in -P script mode, CMake sets the variables
+:variable:`CMAKE_BINARY_DIR`, :variable:`CMAKE_SOURCE_DIR`,
+:variable:`CMAKE_CURRENT_BINARY_DIR` and
+:variable:`CMAKE_CURRENT_SOURCE_DIR` to the current working directory.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CXX_COMPILE_FEATURES.rst b/share/cmake-3.6/Help/variable/CMAKE_CXX_COMPILE_FEATURES.rst
new file mode 100644
index 0000000..5c59f95
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CXX_COMPILE_FEATURES.rst
@@ -0,0 +1,11 @@
+CMAKE_CXX_COMPILE_FEATURES
+--------------------------
+
+List of features known to the C++ compiler
+
+These features are known to be available for use with the C++ compiler. This
+list is a subset of the features listed in the
+:prop_gbl:`CMAKE_CXX_KNOWN_FEATURES` global property.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CXX_EXTENSIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_CXX_EXTENSIONS.rst
new file mode 100644
index 0000000..4a92425
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CXX_EXTENSIONS.rst
@@ -0,0 +1,11 @@
+CMAKE_CXX_EXTENSIONS
+--------------------
+
+Default value for :prop_tgt:`CXX_EXTENSIONS` property of targets.
+
+This variable is used to initialize the :prop_tgt:`CXX_EXTENSIONS`
+property on all targets.  See that target property for additional
+information.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CXX_STANDARD.rst b/share/cmake-3.6/Help/variable/CMAKE_CXX_STANDARD.rst
new file mode 100644
index 0000000..8a8bdff
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CXX_STANDARD.rst
@@ -0,0 +1,11 @@
+CMAKE_CXX_STANDARD
+------------------
+
+Default value for :prop_tgt:`CXX_STANDARD` property of targets.
+
+This variable is used to initialize the :prop_tgt:`CXX_STANDARD`
+property on all targets.  See that target property for additional
+information.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_CXX_STANDARD_REQUIRED.rst b/share/cmake-3.6/Help/variable/CMAKE_CXX_STANDARD_REQUIRED.rst
new file mode 100644
index 0000000..4c71058
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_CXX_STANDARD_REQUIRED.rst
@@ -0,0 +1,11 @@
+CMAKE_CXX_STANDARD_REQUIRED
+---------------------------
+
+Default value for :prop_tgt:`CXX_STANDARD_REQUIRED` property of targets.
+
+This variable is used to initialize the :prop_tgt:`CXX_STANDARD_REQUIRED`
+property on all targets.  See that target property for additional
+information.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_C_COMPILE_FEATURES.rst b/share/cmake-3.6/Help/variable/CMAKE_C_COMPILE_FEATURES.rst
new file mode 100644
index 0000000..8d1eca0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_C_COMPILE_FEATURES.rst
@@ -0,0 +1,11 @@
+CMAKE_C_COMPILE_FEATURES
+------------------------
+
+List of features known to the C compiler
+
+These features are known to be available for use with the C compiler. This
+list is a subset of the features listed in the
+:prop_gbl:`CMAKE_C_KNOWN_FEATURES` global property.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_C_EXTENSIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_C_EXTENSIONS.rst
new file mode 100644
index 0000000..fa510d4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_C_EXTENSIONS.rst
@@ -0,0 +1,11 @@
+CMAKE_C_EXTENSIONS
+------------------
+
+Default value for :prop_tgt:`C_EXTENSIONS` property of targets.
+
+This variable is used to initialize the :prop_tgt:`C_EXTENSIONS`
+property on all targets.  See that target property for additional
+information.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_C_STANDARD.rst b/share/cmake-3.6/Help/variable/CMAKE_C_STANDARD.rst
new file mode 100644
index 0000000..b55e00c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_C_STANDARD.rst
@@ -0,0 +1,11 @@
+CMAKE_C_STANDARD
+----------------
+
+Default value for :prop_tgt:`C_STANDARD` property of targets.
+
+This variable is used to initialize the :prop_tgt:`C_STANDARD`
+property on all targets.  See that target property for additional
+information.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_C_STANDARD_REQUIRED.rst b/share/cmake-3.6/Help/variable/CMAKE_C_STANDARD_REQUIRED.rst
new file mode 100644
index 0000000..7f70f6e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_C_STANDARD_REQUIRED.rst
@@ -0,0 +1,11 @@
+CMAKE_C_STANDARD_REQUIRED
+-------------------------
+
+Default value for :prop_tgt:`C_STANDARD_REQUIRED` property of targets.
+
+This variable is used to initialize the :prop_tgt:`C_STANDARD_REQUIRED`
+property on all targets.  See that target property for additional
+information.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features and a list of supported compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_DEBUG_POSTFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_DEBUG_POSTFIX.rst
new file mode 100644
index 0000000..08577a5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_DEBUG_POSTFIX.rst
@@ -0,0 +1,7 @@
+CMAKE_DEBUG_POSTFIX
+-------------------
+
+See variable :variable:`CMAKE_<CONFIG>_POSTFIX`.
+
+This variable is a special case of the more-general
+:variable:`CMAKE_<CONFIG>_POSTFIX` variable for the `DEBUG` configuration.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_DEBUG_TARGET_PROPERTIES.rst b/share/cmake-3.6/Help/variable/CMAKE_DEBUG_TARGET_PROPERTIES.rst
new file mode 100644
index 0000000..513276e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_DEBUG_TARGET_PROPERTIES.rst
@@ -0,0 +1,14 @@
+CMAKE_DEBUG_TARGET_PROPERTIES
+-----------------------------
+
+Enables tracing output for target properties.
+
+This variable can be populated with a list of properties to generate
+debug output for when evaluating target properties.  Currently it can
+only be used when evaluating the :prop_tgt:`INCLUDE_DIRECTORIES`,
+:prop_tgt:`COMPILE_DEFINITIONS`, :prop_tgt:`COMPILE_OPTIONS`,
+:prop_tgt:`AUTOUIC_OPTIONS`, :prop_tgt:`SOURCES`, :prop_tgt:`COMPILE_FEATURES`,
+:prop_tgt:`POSITION_INDEPENDENT_CODE` target properties and any other property
+listed in :prop_tgt:`COMPATIBLE_INTERFACE_STRING` and other
+``COMPATIBLE_INTERFACE_`` properties.  It outputs an origin for each entry in
+the target property.  Default is unset.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_DEPENDS_IN_PROJECT_ONLY.rst b/share/cmake-3.6/Help/variable/CMAKE_DEPENDS_IN_PROJECT_ONLY.rst
new file mode 100644
index 0000000..7179071
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_DEPENDS_IN_PROJECT_ONLY.rst
@@ -0,0 +1,10 @@
+CMAKE_DEPENDS_IN_PROJECT_ONLY
+-----------------------------
+
+When set to ``TRUE`` in a directory, the build system produced by the
+:ref:`Makefile Generators` is set up to only consider dependencies on source
+files that appear either in the source or in the binary directories.  Changes
+to source files outside of these directories will not cause rebuilds.
+
+This should be used carefully in cases where some source files are picked up
+through external headers during the build.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName.rst b/share/cmake-3.6/Help/variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName.rst
new file mode 100644
index 0000000..ed60020
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_DISABLE_FIND_PACKAGE_PackageName.rst
@@ -0,0 +1,16 @@
+CMAKE_DISABLE_FIND_PACKAGE_<PackageName>
+----------------------------------------
+
+Variable for disabling :command:`find_package` calls.
+
+Every non-``REQUIRED`` :command:`find_package` call in a project can be
+disabled by setting the variable
+``CMAKE_DISABLE_FIND_PACKAGE_<PackageName>`` to ``TRUE``.
+This can be used to build a project without an optional package,
+although that package is installed.
+
+This switch should be used during the initial CMake run.  Otherwise if
+the package has already been found in a previous CMake run, the
+variables which have been stored in the cache will still be there.  In
+that case it is recommended to remove the cache variables for this
+package from the cache using the cache editor or :manual:`cmake(1)` ``-U``
diff --git a/share/cmake-3.6/Help/variable/CMAKE_DL_LIBS.rst b/share/cmake-3.6/Help/variable/CMAKE_DL_LIBS.rst
new file mode 100644
index 0000000..1fe7641
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_DL_LIBS.rst
@@ -0,0 +1,7 @@
+CMAKE_DL_LIBS
+-------------
+
+Name of library containing ``dlopen`` and ``dlcose``.
+
+The name of the library that has ``dlopen`` and ``dlclose`` in it, usually
+``-ldl`` on most UNIX machines.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES.rst b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES.rst
new file mode 100644
index 0000000..331aae8
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES.rst
@@ -0,0 +1,10 @@
+CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES
+---------------------------------------
+
+This cache variable is used by the Eclipse project generator.  See
+:manual:`cmake-generators(7)`.
+
+The Eclipse project generator generates so-called linked resources
+e.g. to the subproject root dirs in the source tree or to the source files
+of targets.
+This can be disabled by setting this variable to FALSE.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT.rst b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT.rst
new file mode 100644
index 0000000..7b4367d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT.rst
@@ -0,0 +1,11 @@
+CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT
+-------------------------------------
+
+This cache variable is used by the Eclipse project generator.  See
+:manual:`cmake-generators(7)`.
+
+If this variable is set to TRUE, the Eclipse project generator will generate
+an Eclipse project in :variable:`CMAKE_SOURCE_DIR` . This project can then
+be used in Eclipse e.g. for the version control functionality.
+:variable:`CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT` defaults to FALSE; so
+nothing is written into the source directory.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_MAKE_ARGUMENTS.rst b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_MAKE_ARGUMENTS.rst
new file mode 100644
index 0000000..6e8a408
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_MAKE_ARGUMENTS.rst
@@ -0,0 +1,9 @@
+CMAKE_ECLIPSE_MAKE_ARGUMENTS
+----------------------------
+
+This cache variable is used by the Eclipse project generator.  See
+:manual:`cmake-generators(7)`.
+
+This variable holds arguments which are used when Eclipse invokes the make
+tool. By default it is initialized to hold flags to enable parallel builds
+(using -j typically).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_VERSION.rst
new file mode 100644
index 0000000..8cc7882
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ECLIPSE_VERSION.rst
@@ -0,0 +1,10 @@
+CMAKE_ECLIPSE_VERSION
+---------------------
+
+This cache variable is used by the Eclipse project generator.  See
+:manual:`cmake-generators(7)`.
+
+When using the Eclipse project generator, CMake tries to find the Eclipse
+executable and detect the version of it. Depending on the version it finds,
+some features are enabled or disabled. If CMake doesn't find
+Eclipse, it assumes the oldest supported version, Eclipse Callisto (3.2).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_EDIT_COMMAND.rst b/share/cmake-3.6/Help/variable/CMAKE_EDIT_COMMAND.rst
new file mode 100644
index 0000000..2f4ab1f
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_EDIT_COMMAND.rst
@@ -0,0 +1,8 @@
+CMAKE_EDIT_COMMAND
+------------------
+
+Full path to :manual:`cmake-gui(1)` or :manual:`ccmake(1)`.  Defined only for
+:ref:`Makefile Generators` when not using an "extra" generator for an IDE.
+
+This is the full path to the CMake executable that can graphically
+edit the cache.  For example, :manual:`cmake-gui(1)` or :manual:`ccmake(1)`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ENABLE_EXPORTS.rst b/share/cmake-3.6/Help/variable/CMAKE_ENABLE_EXPORTS.rst
new file mode 100644
index 0000000..9a877e7
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ENABLE_EXPORTS.rst
@@ -0,0 +1,22 @@
+CMAKE_ENABLE_EXPORTS
+--------------------
+
+Specify whether an executable exports symbols for loadable modules.
+
+Normally an executable does not export any symbols because it is the
+final program.  It is possible for an executable to export symbols to
+be used by loadable modules.  When this property is set to true CMake
+will allow other targets to ``link`` to the executable with the
+:command:`TARGET_LINK_LIBRARIES` command.  On all platforms a target-level
+dependency on the executable is created for targets that link to it.
+For DLL platforms an import library will be created for the exported
+symbols and then used for linking.  All Windows-based systems
+including Cygwin are DLL platforms.  For non-DLL platforms that
+require all symbols to be resolved at link time, such as OS X, the
+module will ``link`` to the executable using a flag like
+``-bundle_loader``.  For other non-DLL platforms the link rule is simply
+ignored since the dynamic loader will automatically bind symbols when
+the module is loaded.
+
+This variable is used to initialize the target property
+:prop_tgt:`ENABLE_EXPORTS` for executable targets.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ERROR_DEPRECATED.rst b/share/cmake-3.6/Help/variable/CMAKE_ERROR_DEPRECATED.rst
new file mode 100644
index 0000000..f3a6738
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ERROR_DEPRECATED.rst
@@ -0,0 +1,7 @@
+CMAKE_ERROR_DEPRECATED
+----------------------
+
+Whether to issue errors for deprecated functionality.
+
+If ``TRUE``, use of deprecated functionality will issue fatal errors.
+If this variable is not set, CMake behaves as if it were set to ``FALSE``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.6/Help/variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
new file mode 100644
index 0000000..38e9b7b
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
@@ -0,0 +1,10 @@
+CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
+-------------------------------------------
+
+Ask ``cmake_install.cmake`` script to error out as soon as a file with
+absolute ``INSTALL DESTINATION`` is encountered.
+
+The fatal error is emitted before the installation of the offending
+file takes place.  This variable is used by CMake-generated
+``cmake_install.cmake`` scripts.  If one sets this variable to ``ON`` while
+running the script, it may get fatal error messages from the script.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_EXECUTABLE_SUFFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_EXECUTABLE_SUFFIX.rst
new file mode 100644
index 0000000..356590f
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_EXECUTABLE_SUFFIX.rst
@@ -0,0 +1,9 @@
+CMAKE_EXECUTABLE_SUFFIX
+-----------------------
+
+The suffix for executables on this platform.
+
+The suffix to use for the end of an executable filename if any, ``.exe``
+on Windows.
+
+``CMAKE_EXECUTABLE_SUFFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_EXE_LINKER_FLAGS.rst b/share/cmake-3.6/Help/variable/CMAKE_EXE_LINKER_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_EXE_LINKER_FLAGS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_EXE_LINKER_FLAGS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_EXE_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_EXE_LINKER_FLAGS_CONFIG.rst
new file mode 100644
index 0000000..0cd8113
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_EXE_LINKER_FLAGS_CONFIG.rst
@@ -0,0 +1,7 @@
+CMAKE_EXE_LINKER_FLAGS_<CONFIG>
+-------------------------------
+
+Flags to be used when linking an executable.
+
+Same as ``CMAKE_C_FLAGS_*`` but used by the linker when creating
+executables.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_EXPORT_COMPILE_COMMANDS.rst b/share/cmake-3.6/Help/variable/CMAKE_EXPORT_COMPILE_COMMANDS.rst
new file mode 100644
index 0000000..8776279
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_EXPORT_COMPILE_COMMANDS.rst
@@ -0,0 +1,30 @@
+CMAKE_EXPORT_COMPILE_COMMANDS
+-----------------------------
+
+Enable/Disable output of compile commands during generation.
+
+If enabled, generates a ``compile_commands.json`` file containing the exact
+compiler calls for all translation units of the project in machine-readable
+form.  The format of the JSON file looks like:
+
+.. code-block:: javascript
+
+  [
+    {
+      "directory": "/home/user/development/project",
+      "command": "/usr/bin/c++ ... -c ../foo/foo.cc",
+      "file": "../foo/foo.cc"
+    },
+
+    ...
+
+    {
+      "directory": "/home/user/development/project",
+      "command": "/usr/bin/c++ ... -c ../foo/bar.cc",
+      "file": "../foo/bar.cc"
+    }
+  ]
+
+.. note::
+  This option is implemented only by :ref:`Makefile Generators`
+  and the :generator:`Ninja`.  It is ignored on other generators.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_EXPORT_NO_PACKAGE_REGISTRY.rst b/share/cmake-3.6/Help/variable/CMAKE_EXPORT_NO_PACKAGE_REGISTRY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_EXPORT_NO_PACKAGE_REGISTRY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_EXPORT_NO_PACKAGE_REGISTRY.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_EXTRA_GENERATOR.rst b/share/cmake-3.6/Help/variable/CMAKE_EXTRA_GENERATOR.rst
new file mode 100644
index 0000000..4d513e4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_EXTRA_GENERATOR.rst
@@ -0,0 +1,10 @@
+CMAKE_EXTRA_GENERATOR
+---------------------
+
+The extra generator used to build the project.  See
+:manual:`cmake-generators(7)`.
+
+When using the Eclipse, CodeBlocks or KDevelop generators, CMake
+generates Makefiles (:variable:`CMAKE_GENERATOR`) and additionally project
+files for the respective IDE.  This IDE project file generator is stored in
+``CMAKE_EXTRA_GENERATOR`` (e.g.  ``Eclipse CDT4``).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES.rst b/share/cmake-3.6/Help/variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES.rst
new file mode 100644
index 0000000..a130adb
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES.rst
@@ -0,0 +1,9 @@
+CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES
+-----------------------------------
+
+Additional suffixes for shared libraries.
+
+Extensions for shared libraries other than that specified by
+:variable:`CMAKE_SHARED_LIBRARY_SUFFIX`, if any.  CMake uses this to recognize
+external shared library files during analysis of libraries linked by a
+target.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FIND_APPBUNDLE.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_APPBUNDLE.rst
new file mode 100644
index 0000000..e0727b5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FIND_APPBUNDLE.rst
@@ -0,0 +1,22 @@
+CMAKE_FIND_APPBUNDLE
+--------------------
+
+This variable affects how ``find_*`` commands choose between
+OS X Application Bundles and unix-style package components.
+
+On Darwin or systems supporting OS X Application Bundles, the
+``CMAKE_FIND_APPBUNDLE`` variable can be set to empty or
+one of the following:
+
+``FIRST``
+  Try to find application bundles before standard programs.
+  This is the default on Darwin.
+
+``LAST``
+  Try to find application bundles after standard programs.
+
+``ONLY``
+  Only try to find application bundles.
+
+``NEVER``
+  Never try to find application bundles.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FIND_FRAMEWORK.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_FRAMEWORK.rst
new file mode 100644
index 0000000..790694a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FIND_FRAMEWORK.rst
@@ -0,0 +1,22 @@
+CMAKE_FIND_FRAMEWORK
+--------------------
+
+This variable affects how ``find_*`` commands choose between
+OS X Frameworks and unix-style package components.
+
+On Darwin or systems supporting OS X Frameworks, the
+``CMAKE_FIND_FRAMEWORK`` variable can be set to empty or
+one of the following:
+
+``FIRST``
+  Try to find frameworks before standard libraries or headers.
+  This is the default on Darwin.
+
+``LAST``
+  Try to find frameworks after standard libraries or headers.
+
+``ONLY``
+  Only try to find frameworks.
+
+``NEVER``
+  Never try to find frameworks.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FIND_LIBRARY_PREFIXES.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_LIBRARY_PREFIXES.rst
new file mode 100644
index 0000000..58354b2
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FIND_LIBRARY_PREFIXES.rst
@@ -0,0 +1,9 @@
+CMAKE_FIND_LIBRARY_PREFIXES
+---------------------------
+
+Prefixes to prepend when looking for libraries.
+
+This specifies what prefixes to add to library names when the
+:command:`find_library` command looks for libraries.  On UNIX systems this is
+typically ``lib``, meaning that when trying to find the ``foo`` library it
+will look for ``libfoo``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FIND_LIBRARY_SUFFIXES.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_LIBRARY_SUFFIXES.rst
new file mode 100644
index 0000000..4a64e33
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FIND_LIBRARY_SUFFIXES.rst
@@ -0,0 +1,9 @@
+CMAKE_FIND_LIBRARY_SUFFIXES
+---------------------------
+
+Suffixes to append when looking for libraries.
+
+This specifies what suffixes to add to library names when the
+:command:`find_library` command looks for libraries.  On Windows systems this
+is typically ``.lib`` and ``.dll``, meaning that when trying to find the
+``foo`` library it will look for ``foo.dll`` etc.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FIND_NO_INSTALL_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_NO_INSTALL_PREFIX.rst
new file mode 100644
index 0000000..c49d264
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FIND_NO_INSTALL_PREFIX.rst
@@ -0,0 +1,15 @@
+CMAKE_FIND_NO_INSTALL_PREFIX
+----------------------------
+
+Ignore the :variable:`CMAKE_INSTALL_PREFIX` when searching for assets.
+
+CMake adds the :variable:`CMAKE_INSTALL_PREFIX` and the
+:variable:`CMAKE_STAGING_PREFIX` variable to the
+:variable:`CMAKE_SYSTEM_PREFIX_PATH` by default. This variable may be set
+on the command line to control that behavior.
+
+Set ``CMAKE_FIND_NO_INSTALL_PREFIX`` to ``TRUE`` to tell
+:command:`find_package` not to search in the :variable:`CMAKE_INSTALL_PREFIX`
+or :variable:`CMAKE_STAGING_PREFIX` by default.  Note that the
+prefix may still be searched for other reasons, such as being the same prefix
+as the CMake installation, or for being a built-in system prefix.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_NAME.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_NAME.rst
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_NAME.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE.rst
new file mode 100644
index 0000000..f1116bb
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FIND_PACKAGE_WARN_NO_MODULE.rst
@@ -0,0 +1,19 @@
+CMAKE_FIND_PACKAGE_WARN_NO_MODULE
+---------------------------------
+
+Tell :command:`find_package` to warn if called without an explicit mode.
+
+If :command:`find_package` is called without an explicit mode option
+(``MODULE``, ``CONFIG``, or ``NO_MODULE``) and no ``Find<pkg>.cmake`` module
+is in :variable:`CMAKE_MODULE_PATH` then CMake implicitly assumes that the
+caller intends to search for a package configuration file.  If no package
+configuration file is found then the wording of the failure message
+must account for both the case that the package is really missing and
+the case that the project has a bug and failed to provide the intended
+Find module.  If instead the caller specifies an explicit mode option
+then the failure message can be more specific.
+
+Set ``CMAKE_FIND_PACKAGE_WARN_NO_MODULE`` to ``TRUE`` to tell
+:command:`find_package` to warn when it implicitly assumes Config mode.  This
+helps developers enforce use of an explicit mode in all calls to
+:command:`find_package` within a project.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH.rst
new file mode 100644
index 0000000..ba2cf31
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH.rst
@@ -0,0 +1,8 @@
+CMAKE_FIND_ROOT_PATH
+--------------------
+
+:ref:`;-list <CMake Language Lists>` of root paths to search on the filesystem.
+
+This variable is most useful when cross-compiling. CMake uses the paths in
+this list as alternative roots to find filesystem items with
+:command:`find_package`, :command:`find_library` etc.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_INCLUDE.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_INCLUDE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_INCLUDE.rst
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_INCLUDE.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_LIBRARY.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_LIBRARY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_LIBRARY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_LIBRARY.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PACKAGE.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PACKAGE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PACKAGE.rst
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PACKAGE.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PROGRAM.rst b/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PROGRAM.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PROGRAM.rst
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_PROGRAM.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_XXX.txt b/share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_XXX.txt
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_XXX.txt
rename to share/cmake-3.6/Help/variable/CMAKE_FIND_ROOT_PATH_MODE_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CMAKE_FRAMEWORK_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_FRAMEWORK_PATH.rst
new file mode 100644
index 0000000..5ff08e6
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_FRAMEWORK_PATH.rst
@@ -0,0 +1,7 @@
+CMAKE_FRAMEWORK_PATH
+--------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for OS X frameworks used by the :command:`find_library`,
+:command:`find_package`, :command:`find_path`, and :command:`find_file`
+commands.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_Fortran_FORMAT.rst b/share/cmake-3.6/Help/variable/CMAKE_Fortran_FORMAT.rst
new file mode 100644
index 0000000..1406e59
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_Fortran_FORMAT.rst
@@ -0,0 +1,7 @@
+CMAKE_Fortran_FORMAT
+--------------------
+
+Set to ``FIXED`` or ``FREE`` to indicate the Fortran source layout.
+
+This variable is used to initialize the :prop_tgt:`Fortran_FORMAT` property on
+all the targets.  See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODDIR_DEFAULT.rst b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODDIR_DEFAULT.rst
new file mode 100644
index 0000000..5aeab07
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODDIR_DEFAULT.rst
@@ -0,0 +1,8 @@
+CMAKE_Fortran_MODDIR_DEFAULT
+----------------------------
+
+Fortran default module output directory.
+
+Most Fortran compilers write ``.mod`` files to the current working
+directory.  For those that do not, this is set to ``.`` and used when
+the :prop_tgt:`Fortran_MODULE_DIRECTORY` target property is not set.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODDIR_FLAG.rst b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODDIR_FLAG.rst
new file mode 100644
index 0000000..1da55ca
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODDIR_FLAG.rst
@@ -0,0 +1,7 @@
+CMAKE_Fortran_MODDIR_FLAG
+-------------------------
+
+Fortran flag for module output directory.
+
+This stores the flag needed to pass the value of the
+:prop_tgt:`Fortran_MODULE_DIRECTORY` target property to the compiler.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODOUT_FLAG.rst b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODOUT_FLAG.rst
new file mode 100644
index 0000000..2f83880
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODOUT_FLAG.rst
@@ -0,0 +1,7 @@
+CMAKE_Fortran_MODOUT_FLAG
+-------------------------
+
+Fortran flag to enable module output.
+
+Most Fortran compilers write ``.mod`` files out by default.  For others,
+this stores the flag needed to enable module output.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODULE_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODULE_DIRECTORY.rst
new file mode 100644
index 0000000..3c7edc1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_Fortran_MODULE_DIRECTORY.rst
@@ -0,0 +1,8 @@
+CMAKE_Fortran_MODULE_DIRECTORY
+------------------------------
+
+Fortran module output directory.
+
+This variable is used to initialize the :prop_tgt:`Fortran_MODULE_DIRECTORY`
+property on all the targets.  See that target property for additional
+information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_GENERATOR.rst b/share/cmake-3.6/Help/variable/CMAKE_GENERATOR.rst
new file mode 100644
index 0000000..cce04c1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_GENERATOR.rst
@@ -0,0 +1,7 @@
+CMAKE_GENERATOR
+---------------
+
+The generator used to build the project.  See :manual:`cmake-generators(7)`.
+
+The name of the generator that is being used to generate the build
+files.  (e.g.  ``Unix Makefiles``, ``Ninja``, etc.)
diff --git a/share/cmake-3.6/Help/variable/CMAKE_GENERATOR_PLATFORM.rst b/share/cmake-3.6/Help/variable/CMAKE_GENERATOR_PLATFORM.rst
new file mode 100644
index 0000000..a5c284a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_GENERATOR_PLATFORM.rst
@@ -0,0 +1,15 @@
+CMAKE_GENERATOR_PLATFORM
+------------------------
+
+Generator-specific target platform name specified by user.
+
+Some CMake generators support a target platform name to be given
+to the native build system to choose a compiler toolchain.
+If the user specifies a platform name (e.g. via the :manual:`cmake(1)` ``-A``
+option) the value will be available in this variable.
+
+The value of this variable should never be modified by project code.
+A toolchain file specified by the :variable:`CMAKE_TOOLCHAIN_FILE`
+variable may initialize ``CMAKE_GENERATOR_PLATFORM``.  Once a given
+build tree has been initialized with a particular value for this
+variable, changing the value has undefined behavior.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_GENERATOR_TOOLSET.rst b/share/cmake-3.6/Help/variable/CMAKE_GENERATOR_TOOLSET.rst
new file mode 100644
index 0000000..89abe54
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_GENERATOR_TOOLSET.rst
@@ -0,0 +1,15 @@
+CMAKE_GENERATOR_TOOLSET
+-----------------------
+
+Native build system toolset name specified by user.
+
+Some CMake generators support a toolset name to be given to the native
+build system to choose a compiler.  If the user specifies a toolset
+name (e.g.  via the :manual:`cmake(1)` ``-T`` option) the value will be
+available in this variable.
+
+The value of this variable should never be modified by project code.
+A toolchain file specified by the :variable:`CMAKE_TOOLCHAIN_FILE`
+variable may initialize ``CMAKE_GENERATOR_TOOLSET``.  Once a given
+build tree has been initialized with a particular value for this
+variable, changing the value has undefined behavior.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_GNUtoMS.rst b/share/cmake-3.6/Help/variable/CMAKE_GNUtoMS.rst
new file mode 100644
index 0000000..9c0f59e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_GNUtoMS.rst
@@ -0,0 +1,8 @@
+CMAKE_GNUtoMS
+-------------
+
+Convert GNU import libraries (``.dll.a``) to MS format (``.lib``).
+
+This variable is used to initialize the :prop_tgt:`GNUtoMS` property on
+targets when they are created.  See that target property for additional
+information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOME_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CMAKE_HOME_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_HOME_DIRECTORY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_HOME_DIRECTORY.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_HOST_APPLE.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_APPLE.rst
new file mode 100644
index 0000000..ac7b030
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_HOST_APPLE.rst
@@ -0,0 +1,6 @@
+CMAKE_HOST_APPLE
+----------------
+
+``True`` for Apple OS X operating systems.
+
+Set to ``true`` when the host system is Apple OS X.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_HOST_SOLARIS.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_SOLARIS.rst
new file mode 100644
index 0000000..82b5d69
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_HOST_SOLARIS.rst
@@ -0,0 +1,6 @@
+CMAKE_HOST_SOLARIS
+------------------
+
+``True`` for Oracle Solaris operating systems.
+
+Set to ``true`` when the host system is Oracle Solaris.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_HOST_SYSTEM.rst
rename to share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_NAME.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_NAME.rst
new file mode 100644
index 0000000..c673592
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_NAME.rst
@@ -0,0 +1,8 @@
+CMAKE_HOST_SYSTEM_NAME
+----------------------
+
+Name of the OS CMake is running on.
+
+On systems that have the uname command, this variable is set to the
+output of ``uname -s``.  ``Linux``, ``Windows``, and ``Darwin`` for OS X
+are the values found on the big three operating systems.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_PROCESSOR.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_PROCESSOR.rst
new file mode 100644
index 0000000..ba8a850
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_PROCESSOR.rst
@@ -0,0 +1,8 @@
+CMAKE_HOST_SYSTEM_PROCESSOR
+---------------------------
+
+The name of the CPU CMake is running on.
+
+On systems that support ``uname``, this variable is set to the output of
+``uname -p``.  On Windows it is set to the value of the environment variable
+``PROCESSOR_ARCHITECTURE``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_VERSION.rst
new file mode 100644
index 0000000..ed23070
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_HOST_SYSTEM_VERSION.rst
@@ -0,0 +1,8 @@
+CMAKE_HOST_SYSTEM_VERSION
+-------------------------
+
+The OS version CMake is running on.
+
+A numeric version string for the system.  On systems that support
+``uname``, this variable is set to the output of ``uname -r``. On other
+systems this is set to major-minor version numbers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_HOST_UNIX.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_UNIX.rst
new file mode 100644
index 0000000..817a957
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_HOST_UNIX.rst
@@ -0,0 +1,7 @@
+CMAKE_HOST_UNIX
+---------------
+
+``True`` for UNIX and UNIX like operating systems.
+
+Set to ``true`` when the host system is UNIX or UNIX like (i.e.  APPLE and
+CYGWIN).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_HOST_WIN32.rst b/share/cmake-3.6/Help/variable/CMAKE_HOST_WIN32.rst
new file mode 100644
index 0000000..0e4c891
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_HOST_WIN32.rst
@@ -0,0 +1,6 @@
+CMAKE_HOST_WIN32
+----------------
+
+``True`` on Windows systems, including Win64.
+
+Set to ``true`` when the host system is Windows and on Cygwin.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_IGNORE_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_IGNORE_PATH.rst
new file mode 100644
index 0000000..92f3770
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_IGNORE_PATH.rst
@@ -0,0 +1,18 @@
+CMAKE_IGNORE_PATH
+-----------------
+
+:ref:`;-list <CMake Language Lists>` of directories to be *ignored* by
+the :command:`find_program`, :command:`find_library`, :command:`find_file`,
+and :command:`find_path` commands.  This is useful in cross-compiling
+environments where some system directories contain incompatible but
+possibly linkable libraries.  For example, on cross-compiled cluster
+environments, this allows a user to ignore directories containing
+libraries meant for the front-end machine.
+
+By default this is empty; it is intended to be set by the project.
+Note that ``CMAKE_IGNORE_PATH`` takes a list of directory names, *not*
+a list of prefixes.  To ignore paths under prefixes (``bin``, ``include``,
+``lib``, etc.), specify them explicitly.
+
+See also the :variable:`CMAKE_PREFIX_PATH`, :variable:`CMAKE_LIBRARY_PATH`,
+:variable:`CMAKE_INCLUDE_PATH`, and :variable:`CMAKE_PROGRAM_PATH` variables.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_IMPORT_LIBRARY_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_IMPORT_LIBRARY_PREFIX.rst
new file mode 100644
index 0000000..1561a1d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_IMPORT_LIBRARY_PREFIX.rst
@@ -0,0 +1,9 @@
+CMAKE_IMPORT_LIBRARY_PREFIX
+---------------------------
+
+The prefix for import libraries that you link to.
+
+The prefix to use for the name of an import library if used on this
+platform.
+
+``CMAKE_IMPORT_LIBRARY_PREFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_IMPORT_LIBRARY_SUFFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_IMPORT_LIBRARY_SUFFIX.rst
new file mode 100644
index 0000000..11aeab7
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_IMPORT_LIBRARY_SUFFIX.rst
@@ -0,0 +1,9 @@
+CMAKE_IMPORT_LIBRARY_SUFFIX
+---------------------------
+
+The suffix for import libraries that you link to.
+
+The suffix to use for the end of an import library filename if used on
+this platform.
+
+``CMAKE_IMPORT_LIBRARY_SUFFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_CURRENT_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_CURRENT_DIR.rst
new file mode 100644
index 0000000..6eea322
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_CURRENT_DIR.rst
@@ -0,0 +1,13 @@
+CMAKE_INCLUDE_CURRENT_DIR
+-------------------------
+
+Automatically add the current source- and build directories to the include path.
+
+If this variable is enabled, CMake automatically adds
+:variable:`CMAKE_CURRENT_SOURCE_DIR` and :variable:`CMAKE_CURRENT_BINARY_DIR`
+to the include path for each directory.  These additional include
+directories do not propagate down to subdirectories.  This is useful
+mainly for out-of-source builds, where files generated into the build
+tree are included by files located in the source tree.
+
+By default ``CMAKE_INCLUDE_CURRENT_DIR`` is ``OFF``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE.rst b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE.rst
new file mode 100644
index 0000000..5fc95f0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE.rst
@@ -0,0 +1,12 @@
+CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE
+--------------------------------------
+
+Automatically add the current source- and build directories to the
+:prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` target property.
+
+If this variable is enabled, CMake automatically adds for each shared
+library target, static library target, module target and executable
+target, :variable:`CMAKE_CURRENT_SOURCE_DIR` and
+:variable:`CMAKE_CURRENT_BINARY_DIR` to
+the :prop_tgt:`INTERFACE_INCLUDE_DIRECTORIES` target property.  By default
+``CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE`` is ``OFF``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE.rst b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE.rst
new file mode 100644
index 0000000..e0f2a2e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_DIRECTORIES_BEFORE.rst
@@ -0,0 +1,9 @@
+CMAKE_INCLUDE_DIRECTORIES_BEFORE
+--------------------------------
+
+Whether to append or prepend directories by default in
+:command:`include_directories`.
+
+This variable affects the default behavior of the :command:`include_directories`
+command.  Setting this variable to ``ON`` is equivalent to using the ``BEFORE``
+option in all uses of that command.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE.rst b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE.rst
new file mode 100644
index 0000000..37d0a3d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE.rst
@@ -0,0 +1,8 @@
+CMAKE_INCLUDE_DIRECTORIES_PROJECT_BEFORE
+----------------------------------------
+
+Whether to force prepending of project include directories.
+
+This variable affects the order of include directories generated in compiler
+command lines.  If set to ``ON``, it causes the :variable:`CMAKE_SOURCE_DIR`
+and the :variable:`CMAKE_BINARY_DIR` to appear first.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_PATH.rst
new file mode 100644
index 0000000..e4e7f2c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INCLUDE_PATH.rst
@@ -0,0 +1,7 @@
+CMAKE_INCLUDE_PATH
+------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for the :command:`find_file` and :command:`find_path` commands.  By default it
+is empty, it is intended to be set by the project.  See also
+:variable:`CMAKE_SYSTEM_INCLUDE_PATH` and :variable:`CMAKE_PREFIX_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME.rst b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME.rst
new file mode 100644
index 0000000..57160f1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_DEFAULT_COMPONENT_NAME.rst
@@ -0,0 +1,9 @@
+CMAKE_INSTALL_DEFAULT_COMPONENT_NAME
+------------------------------------
+
+Default component used in :command:`install` commands.
+
+If an :command:`install` command is used without the ``COMPONENT`` argument,
+these files will be grouped into a default component.  The name of this
+default install component will be taken from this variable.  It
+defaults to ``Unspecified``.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INSTALL_MESSAGE.rst b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_MESSAGE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_INSTALL_MESSAGE.rst
rename to share/cmake-3.6/Help/variable/CMAKE_INSTALL_MESSAGE.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INSTALL_NAME_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_NAME_DIR.rst
new file mode 100644
index 0000000..1f2d62b
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_NAME_DIR.rst
@@ -0,0 +1,8 @@
+CMAKE_INSTALL_NAME_DIR
+----------------------
+
+OS X directory name for installed targets.
+
+``CMAKE_INSTALL_NAME_DIR`` is used to initialize the
+:prop_tgt:`INSTALL_NAME_DIR` property on all targets.  See that target
+property for more information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INSTALL_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_PREFIX.rst
new file mode 100644
index 0000000..3f3347f
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_PREFIX.rst
@@ -0,0 +1,35 @@
+CMAKE_INSTALL_PREFIX
+--------------------
+
+Install directory used by :command:`install`.
+
+If ``make install`` is invoked or ``INSTALL`` is built, this directory is
+prepended onto all install directories.  This variable defaults to
+``/usr/local`` on UNIX and ``c:/Program Files`` on Windows.
+
+On UNIX one can use the ``DESTDIR`` mechanism in order to relocate the
+whole installation.  ``DESTDIR`` means DESTination DIRectory.  It is
+commonly used by makefile users in order to install software at
+non-default location.  It is usually invoked like this:
+
+::
+
+ make DESTDIR=/home/john install
+
+which will install the concerned software using the installation
+prefix, e.g.  ``/usr/local`` prepended with the ``DESTDIR`` value which
+finally gives ``/home/john/usr/local``.
+
+WARNING: ``DESTDIR`` may not be used on Windows because installation
+prefix usually contains a drive letter like in ``C:/Program Files``
+which cannot be prepended with some other prefix.
+
+The installation prefix is also added to :variable:`CMAKE_SYSTEM_PREFIX_PATH`
+so that :command:`find_package`, :command:`find_program`,
+:command:`find_library`, :command:`find_path`, and :command:`find_file`
+will search the prefix for other software.
+
+.. note::
+
+  Use the :module:`GNUInstallDirs` module to provide GNU-style
+  options for the layout of directories within the installation.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INSTALL_RPATH.rst b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_RPATH.rst
new file mode 100644
index 0000000..813d1e0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_RPATH.rst
@@ -0,0 +1,8 @@
+CMAKE_INSTALL_RPATH
+-------------------
+
+The rpath to use for installed targets.
+
+A semicolon-separated list specifying the rpath to use in installed
+targets (for platforms that support it).  This is used to initialize
+the target property :prop_tgt:`INSTALL_RPATH` for all targets.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH.rst
new file mode 100644
index 0000000..78148d5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_INSTALL_RPATH_USE_LINK_PATH.rst
@@ -0,0 +1,9 @@
+CMAKE_INSTALL_RPATH_USE_LINK_PATH
+---------------------------------
+
+Add paths to linker search and installed rpath.
+
+``CMAKE_INSTALL_RPATH_USE_LINK_PATH`` is a boolean that if set to ``true``
+will append directories in the linker search path and outside the
+project to the :prop_tgt:`INSTALL_RPATH`.  This is used to initialize the
+target property :prop_tgt:`INSTALL_RPATH_USE_LINK_PATH` for all targets.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_INTERNAL_PLATFORM_ABI.rst b/share/cmake-3.6/Help/variable/CMAKE_INTERNAL_PLATFORM_ABI.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_INTERNAL_PLATFORM_ABI.rst
rename to share/cmake-3.6/Help/variable/CMAKE_INTERNAL_PLATFORM_ABI.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_IOS_INSTALL_COMBINED.rst b/share/cmake-3.6/Help/variable/CMAKE_IOS_INSTALL_COMBINED.rst
new file mode 100644
index 0000000..c5cb9b6
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_IOS_INSTALL_COMBINED.rst
@@ -0,0 +1,8 @@
+CMAKE_IOS_INSTALL_COMBINED
+--------------------------
+
+Default value for :prop_tgt:`IOS_INSTALL_COMBINED` of targets.
+
+This variable is used to initialize the :prop_tgt:`IOS_INSTALL_COMBINED`
+property on all the targets.  See that target property for additional
+information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_JOB_POOL_COMPILE.rst b/share/cmake-3.6/Help/variable/CMAKE_JOB_POOL_COMPILE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_JOB_POOL_COMPILE.rst
rename to share/cmake-3.6/Help/variable/CMAKE_JOB_POOL_COMPILE.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_JOB_POOL_LINK.rst b/share/cmake-3.6/Help/variable/CMAKE_JOB_POOL_LINK.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_JOB_POOL_LINK.rst
rename to share/cmake-3.6/Help/variable/CMAKE_JOB_POOL_LINK.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_APPEND.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_APPEND.rst
new file mode 100644
index 0000000..ab4ad71
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_APPEND.rst
@@ -0,0 +1,10 @@
+CMAKE_<LANG>_ARCHIVE_APPEND
+---------------------------
+
+Rule variable to append to a static archive.
+
+This is a rule variable that tells CMake how to append to a static
+archive.  It is used in place of :variable:`CMAKE_<LANG>_CREATE_STATIC_LIBRARY`
+on some platforms in order to support large object counts.  See also
+:variable:`CMAKE_<LANG>_ARCHIVE_CREATE` and
+:variable:`CMAKE_<LANG>_ARCHIVE_FINISH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_CREATE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_CREATE.rst
new file mode 100644
index 0000000..fc295af
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_CREATE.rst
@@ -0,0 +1,10 @@
+CMAKE_<LANG>_ARCHIVE_CREATE
+---------------------------
+
+Rule variable to create a new static archive.
+
+This is a rule variable that tells CMake how to create a static
+archive.  It is used in place of :variable:`CMAKE_<LANG>_CREATE_STATIC_LIBRARY`
+on some platforms in order to support large object counts.  See also
+:variable:`CMAKE_<LANG>_ARCHIVE_APPEND` and
+:variable:`CMAKE_<LANG>_ARCHIVE_FINISH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_FINISH.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_FINISH.rst
new file mode 100644
index 0000000..1bb5d65
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_ARCHIVE_FINISH.rst
@@ -0,0 +1,10 @@
+CMAKE_<LANG>_ARCHIVE_FINISH
+---------------------------
+
+Rule variable to finish an existing static archive.
+
+This is a rule variable that tells CMake how to finish a static
+archive.  It is used in place of :variable:`CMAKE_<LANG>_CREATE_STATIC_LIBRARY`
+on some platforms in order to support large object counts.  See also
+:variable:`CMAKE_<LANG>_ARCHIVE_CREATE` and
+:variable:`CMAKE_<LANG>_ARCHIVE_APPEND`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_CLANG_TIDY.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_CLANG_TIDY.rst
new file mode 100644
index 0000000..492c12c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_CLANG_TIDY.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_CLANG_TIDY
+-----------------------
+
+Default value for :prop_tgt:`<LANG>_CLANG_TIDY` target property.
+This variable is used to initialize the property on each target as it is
+created.  This is done only when ``<LANG>`` is ``C`` or ``CXX``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER.rst
new file mode 100644
index 0000000..89df495
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_COMPILER
+---------------------
+
+The full path to the compiler for ``LANG``.
+
+This is the command that will be used as the ``<LANG>`` compiler.  Once
+set, you can not change this variable.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_ABI.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_ABI.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_ABI.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_ABI.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN.rst
new file mode 100644
index 0000000..5be935b
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_EXTERNAL_TOOLCHAIN.rst
@@ -0,0 +1,13 @@
+CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN
+----------------------------------------
+
+The external toolchain for cross-compiling, if supported.
+
+Some compiler toolchains do not ship their own auxiliary utilities such as
+archivers and linkers.  The compiler driver may support a command-line argument
+to specify the location of such tools.
+``CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN`` may be set to a path to a path to
+the external toolchain and will be passed to the compiler driver if supported.
+
+This variable may only be set in a toolchain file specified by
+the :variable:`CMAKE_TOOLCHAIN_FILE` variable.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_ID.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_ID.rst
new file mode 100644
index 0000000..ebd616e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_ID.rst
@@ -0,0 +1,36 @@
+CMAKE_<LANG>_COMPILER_ID
+------------------------
+
+Compiler identification string.
+
+A short string unique to the compiler vendor.  Possible values
+include:
+
+::
+
+  Absoft = Absoft Fortran (absoft.com)
+  ADSP = Analog VisualDSP++ (analog.com)
+  AppleClang = Apple Clang (apple.com)
+  ARMCC = ARM Compiler (arm.com)
+  Bruce = Bruce C Compiler
+  CCur = Concurrent Fortran (ccur.com)
+  Clang = LLVM Clang (clang.llvm.org)
+  Cray = Cray Compiler (cray.com)
+  Embarcadero, Borland = Embarcadero (embarcadero.com)
+  G95 = G95 Fortran (g95.org)
+  GNU = GNU Compiler Collection (gcc.gnu.org)
+  HP = Hewlett-Packard Compiler (hp.com)
+  Intel = Intel Compiler (intel.com)
+  MIPSpro = SGI MIPSpro (sgi.com)
+  MSVC = Microsoft Visual Studio (microsoft.com)
+  OpenWatcom = Open Watcom (openwatcom.org)
+  PGI = The Portland Group (pgroup.com)
+  PathScale = PathScale (pathscale.com)
+  SDCC = Small Device C Compiler (sdcc.sourceforge.net)
+  SunPro = Oracle Solaris Studio (oracle.com)
+  TI = Texas Instruments (ti.com)
+  TinyCC = Tiny C Compiler (tinycc.org)
+  XL, VisualAge, zOS = IBM XL (ibm.com)
+
+This variable is not guaranteed to be defined for all compilers or
+languages.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_LAUNCHER.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_LAUNCHER.rst
new file mode 100644
index 0000000..7961f60
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_LAUNCHER.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_COMPILER_LAUNCHER
+------------------------------
+
+Default value for :prop_tgt:`<LANG>_COMPILER_LAUNCHER` target property.
+This variable is used to initialize the property on each target as it is
+created.  This is done only when ``<LANG>`` is ``C`` or ``CXX``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_LOADED.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_LOADED.rst
new file mode 100644
index 0000000..9308878
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_LOADED.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_COMPILER_LOADED
+----------------------------
+
+Defined to true if the language is enabled.
+
+When language ``<LANG>`` is enabled by :command:`project` or
+:command:`enable_language` this variable is defined to ``1``.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_TARGET.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_TARGET.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_TARGET.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_TARGET.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LANG_COMPILER_VERSION.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILER_VERSION.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILE_OBJECT.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILE_OBJECT.rst
new file mode 100644
index 0000000..ba59cad
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_COMPILE_OBJECT.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_COMPILE_OBJECT
+---------------------------
+
+Rule variable to compile a single object file.
+
+This is a rule variable that tells CMake how to compile a single
+object file for the language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_SHARED_LIBRARY.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_SHARED_LIBRARY.rst
new file mode 100644
index 0000000..be89f85
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_SHARED_LIBRARY.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_CREATE_SHARED_LIBRARY
+----------------------------------
+
+Rule variable to create a shared library.
+
+This is a rule variable that tells CMake how to create a shared
+library for the language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_SHARED_MODULE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_SHARED_MODULE.rst
new file mode 100644
index 0000000..ae5f69d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_SHARED_MODULE.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_CREATE_SHARED_MODULE
+---------------------------------
+
+Rule variable to create a shared module.
+
+This is a rule variable that tells CMake how to create a shared
+library for the language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_STATIC_LIBRARY.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_STATIC_LIBRARY.rst
new file mode 100644
index 0000000..0cff200
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_CREATE_STATIC_LIBRARY.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_CREATE_STATIC_LIBRARY
+----------------------------------
+
+Rule variable to create a static library.
+
+This is a rule variable that tells CMake how to create a static
+library for the language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS.rst
new file mode 100644
index 0000000..c57d92c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_FLAGS
+------------------
+
+Flags for all build types.
+
+``<LANG>`` flags used regardless of the value of :variable:`CMAKE_BUILD_TYPE`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_DEBUG.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_DEBUG.rst
new file mode 100644
index 0000000..a233d4a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_DEBUG.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_FLAGS_DEBUG
+------------------------
+
+Flags for ``Debug`` build type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``Debug``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_MINSIZEREL.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_MINSIZEREL.rst
new file mode 100644
index 0000000..a9436c1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_MINSIZEREL.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_FLAGS_MINSIZEREL
+-----------------------------
+
+Flags for ``MinSizeRel`` build type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``MinSizeRel``
+(short for minimum size release).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_RELEASE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_RELEASE.rst
new file mode 100644
index 0000000..ffc5d79
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_RELEASE.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_FLAGS_RELEASE
+--------------------------
+
+Flags for ``Release`` build type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``Release``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO.rst
new file mode 100644
index 0000000..962768e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_FLAGS_RELWITHDEBINFO.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_FLAGS_RELWITHDEBINFO
+---------------------------------
+
+Flags for ``RelWithDebInfo`` type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``RelWithDebInfo``
+(short for Release With Debug Information).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_DEBUG.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_DEBUG.rst
new file mode 100644
index 0000000..1f639a3
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_DEBUG.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_GHS_KERNEL_FLAGS_DEBUG
+-----------------------------------
+
+GHS kernel flags for ``Debug`` build type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``Debug``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_MINSIZEREL.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_MINSIZEREL.rst
new file mode 100644
index 0000000..94e2115
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_MINSIZEREL.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_GHS_KERNEL_FLAGS_MINSIZEREL
+----------------------------------------
+
+GHS kernel flags for ``MinSizeRel`` build type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``MinSizeRel``
+(short for minimum size release).
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELEASE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELEASE.rst
new file mode 100644
index 0000000..74566ef
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELEASE.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_GHS_KERNEL_FLAGS_RELEASE
+-------------------------------------
+
+GHS kernel flags for ``Release`` build type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``Release``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELWITHDEBINFO.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELWITHDEBINFO.rst
new file mode 100644
index 0000000..d148193
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_GHS_KERNEL_FLAGS_RELWITHDEBINFO.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_GHS_KERNEL_FLAGS_RELWITHDEBINFO
+--------------------------------------------
+
+GHS kernel flags for ``RelWithDebInfo`` type or configuration.
+
+``<LANG>`` flags used when :variable:`CMAKE_BUILD_TYPE` is ``RelWithDebInfo``
+(short for Release With Debug Information).
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_IGNORE_EXTENSIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_IGNORE_EXTENSIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LANG_IGNORE_EXTENSIONS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LANG_IGNORE_EXTENSIONS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES.rst
new file mode 100644
index 0000000..cc80851
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_INCLUDE_DIRECTORIES.rst
@@ -0,0 +1,9 @@
+CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES
+-----------------------------------------
+
+Directories implicitly searched by the compiler for header files.
+
+CMake does not explicitly specify these directories on compiler
+command lines for language ``<LANG>``.  This prevents system include
+directories from being treated as user include directories on some
+compilers.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES.rst
new file mode 100644
index 0000000..a0bd830
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_DIRECTORIES.rst
@@ -0,0 +1,17 @@
+CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES
+--------------------------------------
+
+Implicit linker search path detected for language ``<LANG>``.
+
+Compilers typically pass directories containing language runtime
+libraries and default library search paths when they invoke a linker.
+These paths are implicit linker search directories for the compiler's
+language.  CMake automatically detects these directories for each
+language and reports the results in this variable.
+
+When a library in one of these directories is given by full path to
+:command:`target_link_libraries` CMake will generate the ``-l<name>`` form on
+link lines to ensure the linker searches its implicit directories for the
+library.  Note that some toolchains read implicit directories from an
+environment variable such as ``LIBRARY_PATH`` so keep its value consistent
+when operating in a given build tree.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES.rst
new file mode 100644
index 0000000..61ccc5a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES.rst
@@ -0,0 +1,8 @@
+CMAKE_<LANG>_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
+------------------------------------------------
+
+Implicit linker framework search path detected for language ``<LANG>``.
+
+These paths are implicit linker framework search directories for the
+compiler's language.  CMake automatically detects these directories
+for each language and reports the results in this variable.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES.rst
new file mode 100644
index 0000000..ec16477
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_IMPLICIT_LINK_LIBRARIES.rst
@@ -0,0 +1,10 @@
+CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES
+------------------------------------
+
+Implicit link libraries and flags detected for language ``<LANG>``.
+
+Compilers typically pass language runtime library names and other
+flags when they invoke a linker.  These flags are implicit link
+options for the compiler's language.  CMake automatically detects
+these libraries and flags for each language and reports the results in
+this variable.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_INCLUDE_WHAT_YOU_USE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_INCLUDE_WHAT_YOU_USE.rst
new file mode 100644
index 0000000..2c8028a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_INCLUDE_WHAT_YOU_USE.rst
@@ -0,0 +1,6 @@
+CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE
+---------------------------------
+
+Default value for :prop_tgt:`<LANG>_INCLUDE_WHAT_YOU_USE` target property.
+This variable is used to initialize the property on each target as it is
+created.  This is done only when ``<LANG>`` is ``C`` or ``CXX``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_LIBRARY_ARCHITECTURE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_LIBRARY_ARCHITECTURE.rst
new file mode 100644
index 0000000..7f888ee
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_LIBRARY_ARCHITECTURE.rst
@@ -0,0 +1,8 @@
+CMAKE_<LANG>_LIBRARY_ARCHITECTURE
+---------------------------------
+
+Target architecture library directory name detected for ``<LANG>``.
+
+If the ``<LANG>`` compiler passes to the linker an architecture-specific
+system library search directory such as ``<prefix>/lib/<arch>`` this
+variable contains the ``<arch>`` name if/as detected by CMake.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_LINKER_PREFERENCE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_LINKER_PREFERENCE.rst
new file mode 100644
index 0000000..ff82f8b
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_LINKER_PREFERENCE.rst
@@ -0,0 +1,11 @@
+CMAKE_<LANG>_LINKER_PREFERENCE
+------------------------------
+
+Preference value for linker language selection.
+
+The "linker language" for executable, shared library, and module
+targets is the language whose compiler will invoke the linker.  The
+:prop_tgt:`LINKER_LANGUAGE` target property sets the language explicitly.
+Otherwise, the linker language is that whose linker preference value
+is highest among languages compiled and linked into the target.  See
+also the :variable:`CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES` variable.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES.rst
new file mode 100644
index 0000000..dbbeb0a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_LINKER_PREFERENCE_PROPAGATES.rst
@@ -0,0 +1,9 @@
+CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES
+-----------------------------------------
+
+True if :variable:`CMAKE_<LANG>_LINKER_PREFERENCE` propagates across targets.
+
+This is used when CMake selects a linker language for a target.
+Languages compiled directly into the target are always considered.  A
+language compiled into static libraries linked by the target is
+considered if this variable is true.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_LINK_EXECUTABLE.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_LINK_EXECUTABLE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LANG_LINK_EXECUTABLE.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LANG_LINK_EXECUTABLE.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_OUTPUT_EXTENSION.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_OUTPUT_EXTENSION.rst
new file mode 100644
index 0000000..0fbc566
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_OUTPUT_EXTENSION.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_OUTPUT_EXTENSION
+-----------------------------
+
+Extension for the output of a compile for a single file.
+
+This is the extension for an object file for the given ``<LANG>``.  For
+example ``.obj`` for C on Windows.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_PLATFORM_ID.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_PLATFORM_ID.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LANG_PLATFORM_ID.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LANG_PLATFORM_ID.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_SIMULATE_ID.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_SIMULATE_ID.rst
new file mode 100644
index 0000000..15c87a1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_SIMULATE_ID.rst
@@ -0,0 +1,9 @@
+CMAKE_<LANG>_SIMULATE_ID
+------------------------
+
+Identification string of "simulated" compiler.
+
+Some compilers simulate other compilers to serve as drop-in
+replacements.  When CMake detects such a compiler it sets this
+variable to what would have been the :variable:`CMAKE_<LANG>_COMPILER_ID` for
+the simulated compiler.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_SIMULATE_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_SIMULATE_VERSION.rst
new file mode 100644
index 0000000..d6325e0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_SIMULATE_VERSION.rst
@@ -0,0 +1,9 @@
+CMAKE_<LANG>_SIMULATE_VERSION
+-----------------------------
+
+Version string of "simulated" compiler.
+
+Some compilers simulate other compilers to serve as drop-in
+replacements.  When CMake detects such a compiler it sets this
+variable to what would have been the :variable:`CMAKE_<LANG>_COMPILER_VERSION`
+for the simulated compiler.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_SIZEOF_DATA_PTR.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_SIZEOF_DATA_PTR.rst
new file mode 100644
index 0000000..7465923
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_SIZEOF_DATA_PTR.rst
@@ -0,0 +1,7 @@
+CMAKE_<LANG>_SIZEOF_DATA_PTR
+----------------------------
+
+Size of pointer-to-data types for language ``<LANG>``.
+
+This holds the size (in bytes) of pointer-to-data types in the target
+platform ABI.  It is defined for languages ``C`` and ``CXX`` (C++).
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LANG_SOURCE_FILE_EXTENSIONS.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_SOURCE_FILE_EXTENSIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LANG_SOURCE_FILE_EXTENSIONS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LANG_SOURCE_FILE_EXTENSIONS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_STANDARD_INCLUDE_DIRECTORIES.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_STANDARD_INCLUDE_DIRECTORIES.rst
new file mode 100644
index 0000000..c8e3d57
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_STANDARD_INCLUDE_DIRECTORIES.rst
@@ -0,0 +1,14 @@
+CMAKE_<LANG>_STANDARD_INCLUDE_DIRECTORIES
+-----------------------------------------
+
+Include directories to be used for every source file compiled with
+the ``<LANG>`` compiler.  This is meant for specification of system
+include directories needed by the language for the current platform.
+The directories always appear at the end of the include path passed
+to the compiler.
+
+This variable should not be set by project code.  It is meant to be set by
+CMake's platform information modules for the current toolchain, or by a
+toolchain file when used with :variable:`CMAKE_TOOLCHAIN_FILE`.
+
+See also :variable:`CMAKE_<LANG>_STANDARD_LIBRARIES`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_STANDARD_LIBRARIES.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_STANDARD_LIBRARIES.rst
new file mode 100644
index 0000000..ba6df93
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_STANDARD_LIBRARIES.rst
@@ -0,0 +1,12 @@
+CMAKE_<LANG>_STANDARD_LIBRARIES
+-------------------------------
+
+Libraries linked into every executable and shared library linked
+for language ``<LANG>``.  This is meant for specification of system
+libraries needed by the language for the current platform.
+
+This variable should not be set by project code.  It is meant to be set by
+CMake's platform information modules for the current toolchain, or by a
+toolchain file when used with :variable:`CMAKE_TOOLCHAIN_FILE`.
+
+See also :variable:`CMAKE_<LANG>_STANDARD_INCLUDE_DIRECTORIES`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LANG_VISIBILITY_PRESET.rst b/share/cmake-3.6/Help/variable/CMAKE_LANG_VISIBILITY_PRESET.rst
new file mode 100644
index 0000000..1961ea0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LANG_VISIBILITY_PRESET.rst
@@ -0,0 +1,5 @@
+CMAKE_<LANG>_VISIBILITY_PRESET
+------------------------------
+
+Default value for the :prop_tgt:`<LANG>_VISIBILITY_PRESET` target
+property when a target is created.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_ARCHITECTURE.rst b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_ARCHITECTURE.rst
new file mode 100644
index 0000000..8a7dcbd
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_ARCHITECTURE.rst
@@ -0,0 +1,7 @@
+CMAKE_LIBRARY_ARCHITECTURE
+--------------------------
+
+Target architecture library directory name, if detected.
+
+This is the value of :variable:`CMAKE_<LANG>_LIBRARY_ARCHITECTURE` as detected
+for one of the enabled languages.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX.rst b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX.rst
new file mode 100644
index 0000000..1eb2ac2
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_ARCHITECTURE_REGEX.rst
@@ -0,0 +1,7 @@
+CMAKE_LIBRARY_ARCHITECTURE_REGEX
+--------------------------------
+
+Regex matching possible target architecture library directory names.
+
+This is used to detect :variable:`CMAKE_<LANG>_LIBRARY_ARCHITECTURE` from the
+implicit linker search path by matching the ``<arch>`` name.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY.rst
new file mode 100644
index 0000000..e97296d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY.rst
@@ -0,0 +1,9 @@
+CMAKE_LIBRARY_OUTPUT_DIRECTORY
+------------------------------
+
+Where to put all the :ref:`LIBRARY <Library Output Artifacts>`
+target files when built.
+
+This variable is used to initialize the :prop_tgt:`LIBRARY_OUTPUT_DIRECTORY`
+property on all the targets.  See that target property for additional
+information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst
new file mode 100644
index 0000000..e069cdd
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_OUTPUT_DIRECTORY_CONFIG.rst
@@ -0,0 +1,9 @@
+CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
+---------------------------------------
+
+Where to put all the :ref:`LIBRARY <Library Output Artifacts>`
+target files when built for a specific configuration.
+
+This variable is used to initialize the
+:prop_tgt:`LIBRARY_OUTPUT_DIRECTORY_<CONFIG>` property on all the targets.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_PATH.rst
new file mode 100644
index 0000000..b1770dc
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_PATH.rst
@@ -0,0 +1,7 @@
+CMAKE_LIBRARY_PATH
+------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for the :command:`find_library` command.  By default it is empty, it is
+intended to be set by the project.  See also
+:variable:`CMAKE_SYSTEM_LIBRARY_PATH` and :variable:`CMAKE_PREFIX_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_PATH_FLAG.rst b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_PATH_FLAG.rst
new file mode 100644
index 0000000..ebe5fda
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LIBRARY_PATH_FLAG.rst
@@ -0,0 +1,7 @@
+CMAKE_LIBRARY_PATH_FLAG
+-----------------------
+
+The flag to be used to add a library search path to a compiler.
+
+The flag will be used to specify a library directory to the compiler.
+On most compilers this is ``-L``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LINK_DEF_FILE_FLAG.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_DEF_FILE_FLAG.rst
new file mode 100644
index 0000000..fa09f9f
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LINK_DEF_FILE_FLAG.rst
@@ -0,0 +1,7 @@
+CMAKE_LINK_DEF_FILE_FLAG
+------------------------
+
+Linker flag to be used to specify a ``.def`` file for dll creation.
+
+The flag will be used to add a ``.def`` file when creating a dll on
+Windows; this is only defined on Windows.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LINK_DEPENDS_NO_SHARED.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_DEPENDS_NO_SHARED.rst
new file mode 100644
index 0000000..cec7906
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LINK_DEPENDS_NO_SHARED.rst
@@ -0,0 +1,8 @@
+CMAKE_LINK_DEPENDS_NO_SHARED
+----------------------------
+
+Whether to skip link dependencies on shared library files.
+
+This variable initializes the :prop_tgt:`LINK_DEPENDS_NO_SHARED` property on
+targets when they are created.  See that target property for
+additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LINK_INTERFACE_LIBRARIES.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_INTERFACE_LIBRARIES.rst
new file mode 100644
index 0000000..33865da
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LINK_INTERFACE_LIBRARIES.rst
@@ -0,0 +1,8 @@
+CMAKE_LINK_INTERFACE_LIBRARIES
+------------------------------
+
+Default value for :prop_tgt:`LINK_INTERFACE_LIBRARIES` of targets.
+
+This variable is used to initialize the :prop_tgt:`LINK_INTERFACE_LIBRARIES`
+property on all the targets.  See that target property for additional
+information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_FILE_FLAG.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_FILE_FLAG.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_LINK_LIBRARY_FILE_FLAG.rst
rename to share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_FILE_FLAG.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_FLAG.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_FLAG.rst
new file mode 100644
index 0000000..b5197e4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_FLAG.rst
@@ -0,0 +1,7 @@
+CMAKE_LINK_LIBRARY_FLAG
+-----------------------
+
+Flag to be used to link a library into an executable.
+
+The flag will be used to specify a library to link to an executable.
+On most compilers this is ``-l``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_SUFFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_SUFFIX.rst
new file mode 100644
index 0000000..0ddafe8
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LINK_LIBRARY_SUFFIX.rst
@@ -0,0 +1,6 @@
+CMAKE_LINK_LIBRARY_SUFFIX
+-------------------------
+
+The suffix for libraries that you link to.
+
+The suffix to use for the end of a library filename, ``.lib`` on Windows.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LINK_SEARCH_END_STATIC.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_SEARCH_END_STATIC.rst
new file mode 100644
index 0000000..54cdaaa
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LINK_SEARCH_END_STATIC.rst
@@ -0,0 +1,19 @@
+CMAKE_LINK_SEARCH_END_STATIC
+----------------------------
+
+End a link line such that static system libraries are used.
+
+Some linkers support switches such as ``-Bstatic`` and ``-Bdynamic`` to
+determine whether to use static or shared libraries for ``-lXXX`` options.
+CMake uses these options to set the link type for libraries whose full
+paths are not known or (in some cases) are in implicit link
+directories for the platform.  By default CMake adds an option at the
+end of the library list (if necessary) to set the linker search type
+back to its starting type.  This property switches the final linker
+search type to ``-Bstatic`` regardless of how it started.
+
+This variable is used to initialize the target property
+:prop_tgt:`LINK_SEARCH_END_STATIC` for all targets. If set, it's
+value is also used by the :command:`try_compile` command.
+
+See also :variable:`CMAKE_LINK_SEARCH_START_STATIC`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_LINK_SEARCH_START_STATIC.rst b/share/cmake-3.6/Help/variable/CMAKE_LINK_SEARCH_START_STATIC.rst
new file mode 100644
index 0000000..0d52a31
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_LINK_SEARCH_START_STATIC.rst
@@ -0,0 +1,20 @@
+CMAKE_LINK_SEARCH_START_STATIC
+------------------------------
+
+Assume the linker looks for static libraries by default.
+
+Some linkers support switches such as ``-Bstatic`` and ``-Bdynamic`` to
+determine whether to use static or shared libraries for ``-lXXX`` options.
+CMake uses these options to set the link type for libraries whose full
+paths are not known or (in some cases) are in implicit link
+directories for the platform.  By default the linker search type is
+assumed to be ``-Bdynamic`` at the beginning of the library list.  This
+property switches the assumption to ``-Bstatic``.  It is intended for use
+when linking an executable statically (e.g.  with the GNU ``-static``
+option).
+
+This variable is used to initialize the target property
+:prop_tgt:`LINK_SEARCH_START_STATIC` for all targets.  If set, it's
+value is also used by the :command:`try_compile` command.
+
+See also :variable:`CMAKE_LINK_SEARCH_END_STATIC`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MACOSX_BUNDLE.rst b/share/cmake-3.6/Help/variable/CMAKE_MACOSX_BUNDLE.rst
new file mode 100644
index 0000000..0badaf0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MACOSX_BUNDLE.rst
@@ -0,0 +1,7 @@
+CMAKE_MACOSX_BUNDLE
+-------------------
+
+Default value for :prop_tgt:`MACOSX_BUNDLE` of targets.
+
+This variable is used to initialize the :prop_tgt:`MACOSX_BUNDLE` property on
+all the targets.  See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MACOSX_RPATH.rst b/share/cmake-3.6/Help/variable/CMAKE_MACOSX_RPATH.rst
new file mode 100644
index 0000000..042e807
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MACOSX_RPATH.rst
@@ -0,0 +1,7 @@
+CMAKE_MACOSX_RPATH
+-------------------
+
+Whether to use rpaths on OS X and iOS.
+
+This variable is used to initialize the :prop_tgt:`MACOSX_RPATH` property on
+all targets.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MAJOR_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_MAJOR_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_MAJOR_VERSION.rst
rename to share/cmake-3.6/Help/variable/CMAKE_MAJOR_VERSION.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MAKE_PROGRAM.rst b/share/cmake-3.6/Help/variable/CMAKE_MAKE_PROGRAM.rst
new file mode 100644
index 0000000..a3b997a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MAKE_PROGRAM.rst
@@ -0,0 +1,65 @@
+CMAKE_MAKE_PROGRAM
+------------------
+
+Tool that can launch the native build system.
+The value may be the full path to an executable or just the tool
+name if it is expected to be in the ``PATH``.
+
+The tool selected depends on the :variable:`CMAKE_GENERATOR` used
+to configure the project:
+
+* The :ref:`Makefile Generators` set this to ``make``, ``gmake``, or
+  a generator-specific tool (e.g. ``nmake`` for :generator:`NMake Makefiles`).
+
+  These generators store ``CMAKE_MAKE_PROGRAM`` in the CMake cache
+  so that it may be edited by the user.
+
+* The :generator:`Ninja` generator sets this to ``ninja``.
+
+  This generator stores ``CMAKE_MAKE_PROGRAM`` in the CMake cache
+  so that it may be edited by the user.
+
+* The :generator:`Xcode` generator sets this to ``xcodebuild`` (or possibly an
+  otherwise undocumented ``cmakexbuild`` wrapper implementing some
+  workarounds).
+
+  This generator prefers to lookup the build tool at build time
+  rather than to store ``CMAKE_MAKE_PROGRAM`` in the CMake cache
+  ahead of time.  This is because ``xcodebuild`` is easy to find,
+  the ``cmakexbuild`` wrapper is needed only for older Xcode versions,
+  and the path to ``cmakexbuild`` may be outdated if CMake itself moves.
+
+  For compatibility with versions of CMake prior to 3.2, if
+  a user or project explicitly adds ``CMAKE_MAKE_PROGRAM`` to
+  the CMake cache then CMake will use the specified value.
+
+* The :ref:`Visual Studio Generators` set this to the full path to
+  ``MSBuild.exe`` (VS >= 10), ``devenv.com`` (VS 7,8,9), or
+  ``VCExpress.exe`` (VS Express 8,9).
+  (See also variables
+  :variable:`CMAKE_VS_MSBUILD_COMMAND` and
+  :variable:`CMAKE_VS_DEVENV_COMMAND`.
+
+  These generators prefer to lookup the build tool at build time
+  rather than to store ``CMAKE_MAKE_PROGRAM`` in the CMake cache
+  ahead of time.  This is because the tools are version-specific
+  and can be located using the Windows Registry.  It is also
+  necessary because the proper build tool may depend on the
+  project content (e.g. the Intel Fortran plugin to VS 10 and 11
+  requires ``devenv.com`` to build its ``.vfproj`` project files
+  even though ``MSBuild.exe`` is normally preferred to support
+  the :variable:`CMAKE_GENERATOR_TOOLSET`).
+
+  For compatibility with versions of CMake prior to 3.0, if
+  a user or project explicitly adds ``CMAKE_MAKE_PROGRAM`` to
+  the CMake cache then CMake will use the specified value if
+  possible.
+
+* The :generator:`Green Hills MULTI` generator sets this to ``gbuild``.
+  If a user or project explicitly adds ``CMAKE_MAKE_PROGRAM`` to
+  the CMake cache then CMake will use the specified value.
+
+The ``CMAKE_MAKE_PROGRAM`` variable is set for use by project code.
+The value is also used by the :manual:`cmake(1)` ``--build`` and
+:manual:`ctest(1)` ``--build-and-test`` tools to launch the native
+build process.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG.rst
new file mode 100644
index 0000000..ed29afe
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MAP_IMPORTED_CONFIG_CONFIG.rst
@@ -0,0 +1,8 @@
+CMAKE_MAP_IMPORTED_CONFIG_<CONFIG>
+----------------------------------
+
+Default value for :prop_tgt:`MAP_IMPORTED_CONFIG_<CONFIG>` of targets.
+
+This variable is used to initialize the
+:prop_tgt:`MAP_IMPORTED_CONFIG_<CONFIG>` property on all the targets.  See
+that target property for additional information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MATCH_COUNT.rst b/share/cmake-3.6/Help/variable/CMAKE_MATCH_COUNT.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_MATCH_COUNT.rst
rename to share/cmake-3.6/Help/variable/CMAKE_MATCH_COUNT.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MFC_FLAG.rst b/share/cmake-3.6/Help/variable/CMAKE_MFC_FLAG.rst
new file mode 100644
index 0000000..1543677
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MFC_FLAG.rst
@@ -0,0 +1,16 @@
+CMAKE_MFC_FLAG
+--------------
+
+Tell cmake to use MFC for an executable or dll.
+
+This can be set in a ``CMakeLists.txt`` file and will enable MFC in the
+application.  It should be set to ``1`` for the static MFC library, and ``2``
+for the shared MFC library.  This is used in Visual Studio 7
+project files.  The CMakeSetup dialog used MFC and the ``CMakeLists.txt``
+looks like this:
+
+::
+
+  add_definitions(-D_AFXDLL)
+  set(CMAKE_MFC_FLAG 2)
+  add_executable(CMakeSetup WIN32 ${SRCS})
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MINIMUM_REQUIRED_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_MINIMUM_REQUIRED_VERSION.rst
new file mode 100644
index 0000000..5a51634
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MINIMUM_REQUIRED_VERSION.rst
@@ -0,0 +1,7 @@
+CMAKE_MINIMUM_REQUIRED_VERSION
+------------------------------
+
+Version specified to :command:`cmake_minimum_required` command
+
+Variable containing the ``VERSION`` component specified in the
+:command:`cmake_minimum_required` command.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MINOR_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_MINOR_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_MINOR_VERSION.rst
rename to share/cmake-3.6/Help/variable/CMAKE_MINOR_VERSION.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_MODULE_LINKER_FLAGS.rst b/share/cmake-3.6/Help/variable/CMAKE_MODULE_LINKER_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_MODULE_LINKER_FLAGS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_MODULE_LINKER_FLAGS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG.rst
new file mode 100644
index 0000000..393263e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MODULE_LINKER_FLAGS_CONFIG.rst
@@ -0,0 +1,6 @@
+CMAKE_MODULE_LINKER_FLAGS_<CONFIG>
+----------------------------------
+
+Flags to be used when linking a module.
+
+Same as ``CMAKE_C_FLAGS_*`` but used by the linker when creating modules.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_MODULE_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_MODULE_PATH.rst
new file mode 100644
index 0000000..5ea7cbb
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_MODULE_PATH.rst
@@ -0,0 +1,7 @@
+CMAKE_MODULE_PATH
+-----------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for CMake modules to be loaded by the the :command:`include` or
+:command:`find_package` commands before checking the default modules that come
+with CMake.  By default it is empty, it is intended to be set by the project.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_NINJA_OUTPUT_PATH_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_NINJA_OUTPUT_PATH_PREFIX.rst
new file mode 100644
index 0000000..64091aa
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_NINJA_OUTPUT_PATH_PREFIX.rst
@@ -0,0 +1,27 @@
+CMAKE_NINJA_OUTPUT_PATH_PREFIX
+------------------------------
+
+Set output files path prefix for the :generator:`Ninja` generator.
+
+Every output files listed in the generated ``build.ninja`` will be
+prefixed by the contents of this variable (a trailing slash is
+appended if missing).  This is useful when the generated ninja file is
+meant to be embedded as a ``subninja`` file into a *super* ninja
+project.  For example, a ninja build file generated with a command
+like::
+
+  cd top-build-dir/sub &&
+  cmake -G Ninja -DCMAKE_NINJA_OUTPUT_PATH_PREFIX=sub/ path/to/source
+
+can be embedded in ``top-build-dir/build.ninja`` with a directive like
+this::
+
+  subninja sub/build.ninja
+
+The ``auto-regeneration`` rule in ``top-build-dir/build.ninja`` must have an
+order-only dependency on ``sub/build.ninja``.
+
+.. note::
+  When ``CMAKE_NINJA_OUTPUT_PATH_PREFIX`` is set, the project generated
+  by CMake cannot be used as a standalone project.  No default targets
+  are specified.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_NOT_USING_CONFIG_FLAGS.rst b/share/cmake-3.6/Help/variable/CMAKE_NOT_USING_CONFIG_FLAGS.rst
new file mode 100644
index 0000000..98960c5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_NOT_USING_CONFIG_FLAGS.rst
@@ -0,0 +1,7 @@
+CMAKE_NOT_USING_CONFIG_FLAGS
+----------------------------
+
+Skip ``_BUILD_TYPE`` flags if true.
+
+This is an internal flag used by the generators in CMake to tell CMake
+to skip the ``_BUILD_TYPE`` flags.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_NO_BUILTIN_CHRPATH.rst b/share/cmake-3.6/Help/variable/CMAKE_NO_BUILTIN_CHRPATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_NO_BUILTIN_CHRPATH.rst
rename to share/cmake-3.6/Help/variable/CMAKE_NO_BUILTIN_CHRPATH.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_NO_SYSTEM_FROM_IMPORTED.rst b/share/cmake-3.6/Help/variable/CMAKE_NO_SYSTEM_FROM_IMPORTED.rst
new file mode 100644
index 0000000..61e04b4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_NO_SYSTEM_FROM_IMPORTED.rst
@@ -0,0 +1,8 @@
+CMAKE_NO_SYSTEM_FROM_IMPORTED
+-----------------------------
+
+Default value for :prop_tgt:`NO_SYSTEM_FROM_IMPORTED` of targets.
+
+This variable is used to initialize the :prop_tgt:`NO_SYSTEM_FROM_IMPORTED`
+property on all the targets.  See that target property for additional
+information.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_OBJECT_PATH_MAX.rst b/share/cmake-3.6/Help/variable/CMAKE_OBJECT_PATH_MAX.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_OBJECT_PATH_MAX.rst
rename to share/cmake-3.6/Help/variable/CMAKE_OBJECT_PATH_MAX.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_OSX_ARCHITECTURES.rst b/share/cmake-3.6/Help/variable/CMAKE_OSX_ARCHITECTURES.rst
new file mode 100644
index 0000000..93916dd
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_OSX_ARCHITECTURES.rst
@@ -0,0 +1,10 @@
+CMAKE_OSX_ARCHITECTURES
+-----------------------
+
+Target specific architectures for OS X and iOS.
+
+This variable is used to initialize the :prop_tgt:`OSX_ARCHITECTURES`
+property on each target as it is creaed.  See that target property
+for additional information.
+
+.. include:: CMAKE_OSX_VARIABLE.txt
diff --git a/share/cmake-3.2/Help/variable/CMAKE_OSX_DEPLOYMENT_TARGET.rst b/share/cmake-3.6/Help/variable/CMAKE_OSX_DEPLOYMENT_TARGET.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_OSX_DEPLOYMENT_TARGET.rst
rename to share/cmake-3.6/Help/variable/CMAKE_OSX_DEPLOYMENT_TARGET.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_OSX_SYSROOT.rst b/share/cmake-3.6/Help/variable/CMAKE_OSX_SYSROOT.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_OSX_SYSROOT.rst
rename to share/cmake-3.6/Help/variable/CMAKE_OSX_SYSROOT.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_OSX_VARIABLE.txt b/share/cmake-3.6/Help/variable/CMAKE_OSX_VARIABLE.txt
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_OSX_VARIABLE.txt
rename to share/cmake-3.6/Help/variable/CMAKE_OSX_VARIABLE.txt
diff --git a/share/cmake-3.6/Help/variable/CMAKE_PARENT_LIST_FILE.rst b/share/cmake-3.6/Help/variable/CMAKE_PARENT_LIST_FILE.rst
new file mode 100644
index 0000000..cfd8608
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_PARENT_LIST_FILE.rst
@@ -0,0 +1,9 @@
+CMAKE_PARENT_LIST_FILE
+----------------------
+
+Full path to the CMake file that included the current one.
+
+While processing a CMake file loaded by :command:`include` or
+:command:`find_package` this variable contains the full path to the file
+including it.  The top of the include stack is always the ``CMakeLists.txt``
+for the current directory.  See also :variable:`CMAKE_CURRENT_LIST_FILE`.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PATCH_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_PATCH_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_PATCH_VERSION.rst
rename to share/cmake-3.6/Help/variable/CMAKE_PATCH_VERSION.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY.rst
rename to share/cmake-3.6/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
rename to share/cmake-3.6/Help/variable/CMAKE_PDB_OUTPUT_DIRECTORY_CONFIG.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_POLICY_DEFAULT_CMPNNNN.rst b/share/cmake-3.6/Help/variable/CMAKE_POLICY_DEFAULT_CMPNNNN.rst
new file mode 100644
index 0000000..43582be
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_POLICY_DEFAULT_CMPNNNN.rst
@@ -0,0 +1,17 @@
+CMAKE_POLICY_DEFAULT_CMP<NNNN>
+------------------------------
+
+Default for CMake Policy ``CMP<NNNN>`` when it is otherwise left unset.
+
+Commands :command:`cmake_minimum_required(VERSION)` and
+:command:`cmake_policy(VERSION)` by default leave policies introduced after
+the given version unset.  Set ``CMAKE_POLICY_DEFAULT_CMP<NNNN>`` to ``OLD``
+or ``NEW`` to specify the default for policy ``CMP<NNNN>``, where ``<NNNN>``
+is the policy number.
+
+This variable should not be set by a project in CMake code; use
+:command:`cmake_policy(SET)` instead.  Users running CMake may set this
+variable in the cache (e.g. ``-DCMAKE_POLICY_DEFAULT_CMP<NNNN>=<OLD|NEW>``)
+to set a policy not otherwise set by the project.  Set to ``OLD`` to quiet a
+policy warning while using old behavior or to ``NEW`` to try building the
+project with new behavior.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_POLICY_WARNING_CMPNNNN.rst b/share/cmake-3.6/Help/variable/CMAKE_POLICY_WARNING_CMPNNNN.rst
new file mode 100644
index 0000000..582f9e4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_POLICY_WARNING_CMPNNNN.rst
@@ -0,0 +1,23 @@
+CMAKE_POLICY_WARNING_CMP<NNNN>
+------------------------------
+
+Explicitly enable or disable the warning when CMake Policy ``CMP<NNNN>``
+is not set.  This is meaningful only for the few policies that do not
+warn by default:
+
+* ``CMAKE_POLICY_WARNING_CMP0025`` controls the warning for
+  policy :policy:`CMP0025`.
+* ``CMAKE_POLICY_WARNING_CMP0047`` controls the warning for
+  policy :policy:`CMP0047`.
+* ``CMAKE_POLICY_WARNING_CMP0056`` controls the warning for
+  policy :policy:`CMP0056`.
+* ``CMAKE_POLICY_WARNING_CMP0060`` controls the warning for
+  policy :policy:`CMP0060`.
+* ``CMAKE_POLICY_WARNING_CMP0065`` controls the warning for
+  policy :policy:`CMP0065`.
+
+This variable should not be set by a project in CMake code.  Project
+developers running CMake may set this variable in their cache to
+enable the warning (e.g. ``-DCMAKE_POLICY_WARNING_CMP<NNNN>=ON``).
+Alternatively, running :manual:`cmake(1)` with the ``--debug-output``,
+``--trace``, or ``--trace-expand`` option will also enable the warning.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_POSITION_INDEPENDENT_CODE.rst b/share/cmake-3.6/Help/variable/CMAKE_POSITION_INDEPENDENT_CODE.rst
new file mode 100644
index 0000000..43b1397
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_POSITION_INDEPENDENT_CODE.rst
@@ -0,0 +1,9 @@
+CMAKE_POSITION_INDEPENDENT_CODE
+-------------------------------
+
+Default value for :prop_tgt:`POSITION_INDEPENDENT_CODE` of targets.
+
+This variable is used to initialize the
+:prop_tgt:`POSITION_INDEPENDENT_CODE` property on all the targets.
+See that target property for additional information.  If set, it's
+value is also used by the :command:`try_compile` command.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_PREFIX_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_PREFIX_PATH.rst
new file mode 100644
index 0000000..c2a4a60
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_PREFIX_PATH.rst
@@ -0,0 +1,15 @@
+CMAKE_PREFIX_PATH
+-----------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying installation
+*prefixes* to be searched by the :command:`find_package`,
+:command:`find_program`, :command:`find_library`, :command:`find_file`, and
+:command:`find_path` commands.  Each command will add appropriate
+subdirectories (like ``bin``, ``lib``, or ``include``) as specified in its own
+documentation.
+
+By default this is empty.  It is intended to be set by the project.
+
+See also :variable:`CMAKE_SYSTEM_PREFIX_PATH`, :variable:`CMAKE_INCLUDE_PATH`,
+:variable:`CMAKE_LIBRARY_PATH`, :variable:`CMAKE_PROGRAM_PATH`, and
+:variable:`CMAKE_IGNORE_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_PROGRAM_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_PROGRAM_PATH.rst
new file mode 100644
index 0000000..799e119
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_PROGRAM_PATH.rst
@@ -0,0 +1,7 @@
+CMAKE_PROGRAM_PATH
+------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for the :command:`find_program` command.  By default it is empty, it is
+intended to be set by the project.  See also
+:variable:`CMAKE_SYSTEM_PROGRAM_PATH` and :variable:`CMAKE_PREFIX_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_PROJECT_NAME.rst b/share/cmake-3.6/Help/variable/CMAKE_PROJECT_NAME.rst
new file mode 100644
index 0000000..431e9f3
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_PROJECT_NAME.rst
@@ -0,0 +1,7 @@
+CMAKE_PROJECT_NAME
+------------------
+
+The name of the current project.
+
+This specifies name of the current project from the closest inherited
+:command:`project` command.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_PROJECT_PROJECT-NAME_INCLUDE.rst b/share/cmake-3.6/Help/variable/CMAKE_PROJECT_PROJECT-NAME_INCLUDE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_PROJECT_PROJECT-NAME_INCLUDE.rst
rename to share/cmake-3.6/Help/variable/CMAKE_PROJECT_PROJECT-NAME_INCLUDE.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_RANLIB.rst b/share/cmake-3.6/Help/variable/CMAKE_RANLIB.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_RANLIB.rst
rename to share/cmake-3.6/Help/variable/CMAKE_RANLIB.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_ROOT.rst b/share/cmake-3.6/Help/variable/CMAKE_ROOT.rst
new file mode 100644
index 0000000..1d0a8af
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_ROOT.rst
@@ -0,0 +1,8 @@
+CMAKE_ROOT
+----------
+
+Install directory for running cmake.
+
+This is the install root for the running CMake and the ``Modules``
+directory can be found here.  This is commonly used in this format:
+``${CMAKE_ROOT}/Modules``
diff --git a/share/cmake-3.6/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY.rst
new file mode 100644
index 0000000..6253d4a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY.rst
@@ -0,0 +1,9 @@
+CMAKE_RUNTIME_OUTPUT_DIRECTORY
+------------------------------
+
+Where to put all the :ref:`RUNTIME <Runtime Output Artifacts>`
+target files when built.
+
+This variable is used to initialize the :prop_tgt:`RUNTIME_OUTPUT_DIRECTORY`
+property on all the targets.  See that target property for additional
+information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst
new file mode 100644
index 0000000..080dea6
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_RUNTIME_OUTPUT_DIRECTORY_CONFIG.rst
@@ -0,0 +1,9 @@
+CMAKE_RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
+---------------------------------------
+
+Where to put all the :ref:`RUNTIME <Runtime Output Artifacts>`
+target files when built for a specific configuration.
+
+This variable is used to initialize the
+:prop_tgt:`RUNTIME_OUTPUT_DIRECTORY_<CONFIG>` property on all the targets.
+See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SCRIPT_MODE_FILE.rst b/share/cmake-3.6/Help/variable/CMAKE_SCRIPT_MODE_FILE.rst
new file mode 100644
index 0000000..981af60
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SCRIPT_MODE_FILE.rst
@@ -0,0 +1,9 @@
+CMAKE_SCRIPT_MODE_FILE
+----------------------
+
+Full path to the :manual:`cmake(1)` ``-P`` script file currently being
+processed.
+
+When run in :manual:`cmake(1)` ``-P`` script mode, CMake sets this variable to
+the full path of the script file.  When run to configure a ``CMakeLists.txt``
+file, this variable is not set.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SHARED_LIBRARY_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_SHARED_LIBRARY_PREFIX.rst
new file mode 100644
index 0000000..8afabaf
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SHARED_LIBRARY_PREFIX.rst
@@ -0,0 +1,8 @@
+CMAKE_SHARED_LIBRARY_PREFIX
+---------------------------
+
+The prefix for shared libraries that you link to.
+
+The prefix to use for the name of a shared library, ``lib`` on UNIX.
+
+``CMAKE_SHARED_LIBRARY_PREFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SHARED_LIBRARY_SUFFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_SHARED_LIBRARY_SUFFIX.rst
new file mode 100644
index 0000000..1f96a32
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SHARED_LIBRARY_SUFFIX.rst
@@ -0,0 +1,9 @@
+CMAKE_SHARED_LIBRARY_SUFFIX
+---------------------------
+
+The suffix for shared libraries that you link to.
+
+The suffix to use for the end of a shared library filename, ``.dll`` on
+Windows.
+
+``CMAKE_SHARED_LIBRARY_SUFFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SHARED_LINKER_FLAGS.rst b/share/cmake-3.6/Help/variable/CMAKE_SHARED_LINKER_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_SHARED_LINKER_FLAGS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_SHARED_LINKER_FLAGS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG.rst
new file mode 100644
index 0000000..4bf87a0
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SHARED_LINKER_FLAGS_CONFIG.rst
@@ -0,0 +1,7 @@
+CMAKE_SHARED_LINKER_FLAGS_<CONFIG>
+----------------------------------
+
+Flags to be used when linking a shared library.
+
+Same as ``CMAKE_C_FLAGS_*`` but used by the linker when creating shared
+libraries.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SHARED_MODULE_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_SHARED_MODULE_PREFIX.rst
new file mode 100644
index 0000000..d6eef98
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SHARED_MODULE_PREFIX.rst
@@ -0,0 +1,8 @@
+CMAKE_SHARED_MODULE_PREFIX
+--------------------------
+
+The prefix for loadable modules that you link to.
+
+The prefix to use for the name of a loadable module on this platform.
+
+``CMAKE_SHARED_MODULE_PREFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SHARED_MODULE_SUFFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_SHARED_MODULE_SUFFIX.rst
new file mode 100644
index 0000000..81515c3
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SHARED_MODULE_SUFFIX.rst
@@ -0,0 +1,9 @@
+CMAKE_SHARED_MODULE_SUFFIX
+--------------------------
+
+The suffix for shared libraries that you link to.
+
+The suffix to use for the end of a loadable module filename on this
+platform
+
+``CMAKE_SHARED_MODULE_SUFFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SIZEOF_VOID_P.rst b/share/cmake-3.6/Help/variable/CMAKE_SIZEOF_VOID_P.rst
new file mode 100644
index 0000000..f5464d1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SIZEOF_VOID_P.rst
@@ -0,0 +1,8 @@
+CMAKE_SIZEOF_VOID_P
+-------------------
+
+Size of a ``void`` pointer.
+
+This is set to the size of a pointer on the target machine, and is determined
+by a try compile.  If a 64-bit size is found, then the library search
+path is modified to look for 64-bit libraries first.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SKIP_BUILD_RPATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SKIP_BUILD_RPATH.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_SKIP_BUILD_RPATH.rst
rename to share/cmake-3.6/Help/variable/CMAKE_SKIP_BUILD_RPATH.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY.rst b/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY.rst
new file mode 100644
index 0000000..80a68c9
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_ALL_DEPENDENCY.rst
@@ -0,0 +1,11 @@
+CMAKE_SKIP_INSTALL_ALL_DEPENDENCY
+---------------------------------
+
+Don't make the ``install`` target depend on the ``all`` target.
+
+By default, the ``install`` target depends on the ``all`` target.  This
+has the effect, that when ``make install`` is invoked or ``INSTALL`` is
+built, first the ``all`` target is built, then the installation starts.
+If :variable:`CMAKE_SKIP_INSTALL_ALL_DEPENDENCY` is set to ``TRUE``, this
+dependency is not created, so the installation process will start immediately,
+independent from whether the project has been completely built or not.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_RPATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_RPATH.rst
new file mode 100644
index 0000000..cc0ac21
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_RPATH.rst
@@ -0,0 +1,14 @@
+CMAKE_SKIP_INSTALL_RPATH
+------------------------
+
+Do not include RPATHs in the install tree.
+
+Normally CMake uses the build tree for the RPATH when building
+executables etc on systems that use RPATH.  When the software is
+installed the executables etc are relinked by CMake to have the
+install RPATH.  If this variable is set to true then the software is
+always installed without RPATH, even if RPATH is enabled when
+building.  This can be useful for example to allow running tests from
+the build directory with RPATH enabled before the installation step.
+To omit RPATH in both the build and install steps, use
+:variable:`CMAKE_SKIP_RPATH` instead.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_RULES.rst b/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_RULES.rst
new file mode 100644
index 0000000..44966f3
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SKIP_INSTALL_RULES.rst
@@ -0,0 +1,8 @@
+CMAKE_SKIP_INSTALL_RULES
+------------------------
+
+Whether to disable generation of installation rules.
+
+If ``TRUE``, cmake will neither generate installaton rules nor
+will it generate ``cmake_install.cmake`` files. This variable is ``FALSE`` by
+default.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SKIP_RPATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SKIP_RPATH.rst
new file mode 100644
index 0000000..d7ce8e4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SKIP_RPATH.rst
@@ -0,0 +1,10 @@
+CMAKE_SKIP_RPATH
+----------------
+
+If true, do not add run time path information.
+
+If this is set to ``TRUE``, then the rpath information is not added to
+compiled executables.  The default is to add rpath information if the
+platform supports it.  This allows for easy running from the build
+tree.  To omit RPATH in the install step, but not the build step, use
+:variable:`CMAKE_SKIP_INSTALL_RPATH` instead.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SOURCE_DIR.rst b/share/cmake-3.6/Help/variable/CMAKE_SOURCE_DIR.rst
new file mode 100644
index 0000000..416fbe1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SOURCE_DIR.rst
@@ -0,0 +1,13 @@
+CMAKE_SOURCE_DIR
+----------------
+
+The path to the top level of the source tree.
+
+This is the full path to the top level of the current CMake source
+tree.  For an in-source build, this would be the same as
+:variable:`CMAKE_BINARY_DIR`.
+
+When run in -P script mode, CMake sets the variables
+:variable:`CMAKE_BINARY_DIR`, :variable:`CMAKE_SOURCE_DIR`,
+:variable:`CMAKE_CURRENT_BINARY_DIR` and
+:variable:`CMAKE_CURRENT_SOURCE_DIR` to the current working directory.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_STAGING_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_STAGING_PREFIX.rst
new file mode 100644
index 0000000..1310e94
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_STAGING_PREFIX.rst
@@ -0,0 +1,14 @@
+CMAKE_STAGING_PREFIX
+--------------------
+
+This variable may be set to a path to install to when cross-compiling. This can
+be useful if the path in :variable:`CMAKE_SYSROOT` is read-only, or otherwise
+should remain pristine.
+
+The ``CMAKE_STAGING_PREFIX`` location is also used as a search prefix by the
+``find_*`` commands. This can be controlled by setting the
+:variable:`CMAKE_FIND_NO_INSTALL_PREFIX` variable.
+
+If any RPATH/RUNPATH entries passed to the linker contain the
+``CMAKE_STAGING_PREFIX``, the matching path fragments are replaced with the
+:variable:`CMAKE_INSTALL_PREFIX`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_STATIC_LIBRARY_PREFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_STATIC_LIBRARY_PREFIX.rst
new file mode 100644
index 0000000..714b5cc
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_STATIC_LIBRARY_PREFIX.rst
@@ -0,0 +1,8 @@
+CMAKE_STATIC_LIBRARY_PREFIX
+---------------------------
+
+The prefix for static libraries that you link to.
+
+The prefix to use for the name of a static library, ``lib`` on UNIX.
+
+``CMAKE_STATIC_LIBRARY_PREFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_STATIC_LIBRARY_SUFFIX.rst b/share/cmake-3.6/Help/variable/CMAKE_STATIC_LIBRARY_SUFFIX.rst
new file mode 100644
index 0000000..28dc09d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_STATIC_LIBRARY_SUFFIX.rst
@@ -0,0 +1,9 @@
+CMAKE_STATIC_LIBRARY_SUFFIX
+---------------------------
+
+The suffix for static libraries that you link to.
+
+The suffix to use for the end of a static library filename, ``.lib`` on
+Windows.
+
+``CMAKE_STATIC_LIBRARY_SUFFIX_<LANG>`` overrides this for language ``<LANG>``.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_STATIC_LINKER_FLAGS.rst b/share/cmake-3.6/Help/variable/CMAKE_STATIC_LINKER_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_STATIC_LINKER_FLAGS.rst
rename to share/cmake-3.6/Help/variable/CMAKE_STATIC_LINKER_FLAGS.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG.rst b/share/cmake-3.6/Help/variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG.rst
new file mode 100644
index 0000000..b9f8003
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_STATIC_LINKER_FLAGS_CONFIG.rst
@@ -0,0 +1,7 @@
+CMAKE_STATIC_LINKER_FLAGS_<CONFIG>
+----------------------------------
+
+Flags to be used when linking a static library.
+
+Same as ``CMAKE_C_FLAGS_*`` but used by the linker when creating static
+libraries.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_SYSROOT.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSROOT.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_SYSROOT.rst
rename to share/cmake-3.6/Help/variable/CMAKE_SYSROOT.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM.rst
new file mode 100644
index 0000000..c7d0d8a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM.rst
@@ -0,0 +1,10 @@
+CMAKE_SYSTEM
+------------
+
+Composite name of operating system CMake is compiling for.
+
+This variable is the composite of :variable:`CMAKE_SYSTEM_NAME` and
+:variable:`CMAKE_SYSTEM_VERSION`, e.g.
+``${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}``.  If
+:variable:`CMAKE_SYSTEM_VERSION` is not set, then this variable is
+the same as :variable:`CMAKE_SYSTEM_NAME`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_APPBUNDLE_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_APPBUNDLE_PATH.rst
new file mode 100644
index 0000000..3c6687c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_APPBUNDLE_PATH.rst
@@ -0,0 +1,7 @@
+CMAKE_SYSTEM_APPBUNDLE_PATH
+---------------------------
+
+Search path for OS X application bundles used by the :command:`find_program`,
+and :command:`find_package` commands.  By default it contains the standard
+directories for the current system.  It is *not* intended to be modified by
+the project, use :variable:`CMAKE_APPBUNDLE_PATH` for this.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_FRAMEWORK_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_FRAMEWORK_PATH.rst
new file mode 100644
index 0000000..1e8b0d9
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_FRAMEWORK_PATH.rst
@@ -0,0 +1,8 @@
+CMAKE_SYSTEM_FRAMEWORK_PATH
+---------------------------
+
+Search path for OS X frameworks used by the :command:`find_library`,
+:command:`find_package`, :command:`find_path`, and :command:`find_file`
+commands.  By default it contains the standard directories for the
+current system.  It is *not* intended to be modified by the project,
+use :variable:`CMAKE_FRAMEWORK_PATH` for this.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_IGNORE_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_IGNORE_PATH.rst
new file mode 100644
index 0000000..4ad7e33
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_IGNORE_PATH.rst
@@ -0,0 +1,18 @@
+CMAKE_SYSTEM_IGNORE_PATH
+------------------------
+
+:ref:`;-list <CMake Language Lists>` of directories to be *ignored* by
+the :command:`find_program`, :command:`find_library`, :command:`find_file`,
+and :command:`find_path` commands.  This is useful in cross-compiling
+environments where some system directories contain incompatible but
+possibly linkable libraries.  For example, on cross-compiled cluster
+environments, this allows a user to ignore directories containing
+libraries meant for the front-end machine.
+
+By default this contains a list of directories containing incompatible
+binaries for the host system.  See the :variable:`CMAKE_IGNORE_PATH` variable
+that is intended to be set by the project.
+
+See also the :variable:`CMAKE_SYSTEM_PREFIX_PATH`,
+:variable:`CMAKE_SYSTEM_LIBRARY_PATH`, :variable:`CMAKE_SYSTEM_INCLUDE_PATH`,
+and :variable:`CMAKE_SYSTEM_PROGRAM_PATH` variables.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_INCLUDE_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_INCLUDE_PATH.rst
new file mode 100644
index 0000000..2c14345
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_INCLUDE_PATH.rst
@@ -0,0 +1,8 @@
+CMAKE_SYSTEM_INCLUDE_PATH
+-------------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for the :command:`find_file` and :command:`find_path` commands.  By default
+this contains the standard directories for the current system.  It is *not*
+intended to be modified by the project; use :variable:`CMAKE_INCLUDE_PATH` for
+this.  See also :variable:`CMAKE_SYSTEM_PREFIX_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_LIBRARY_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_LIBRARY_PATH.rst
new file mode 100644
index 0000000..3969cb9
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_LIBRARY_PATH.rst
@@ -0,0 +1,8 @@
+CMAKE_SYSTEM_LIBRARY_PATH
+-------------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for the :command:`find_library` command.  By default this contains the
+standard directories for the current system.  It is *not* intended to be
+modified by the project; use :variable:`CMAKE_LIBRARY_PATH` for this.
+See also :variable:`CMAKE_SYSTEM_PREFIX_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_NAME.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_NAME.rst
new file mode 100644
index 0000000..c3a42e5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_NAME.rst
@@ -0,0 +1,20 @@
+CMAKE_SYSTEM_NAME
+-----------------
+
+The name of the operating system for which CMake is to build.
+See the :variable:`CMAKE_SYSTEM_VERSION` variable for the OS version.
+
+System Name for Host Builds
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+``CMAKE_SYSTEM_NAME`` is by default set to the same value as the
+:variable:`CMAKE_HOST_SYSTEM_NAME` variable so that the build
+targets the host system.
+
+System Name for Cross Compiling
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+``CMAKE_SYSTEM_NAME`` may be set explicitly when first configuring a new build
+tree in order to enable :ref:`cross compiling <Cross Compiling Toolchain>`.
+In this case the :variable:`CMAKE_SYSTEM_VERSION` variable must also be
+set explicitly.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PREFIX_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PREFIX_PATH.rst
new file mode 100644
index 0000000..e74dfad
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PREFIX_PATH.rst
@@ -0,0 +1,18 @@
+CMAKE_SYSTEM_PREFIX_PATH
+------------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying installation
+*prefixes* to be searched by the :command:`find_package`,
+:command:`find_program`, :command:`find_library`, :command:`find_file`, and
+:command:`find_path` commands.  Each command will add appropriate
+subdirectories (like ``bin``, ``lib``, or ``include``) as specified in its own
+documentation.
+
+By default this contains the standard directories for the current system, the
+:variable:`CMAKE_INSTALL_PREFIX`, and the :variable:`CMAKE_STAGING_PREFIX`.
+It is *not* intended to be modified by the project; use
+:variable:`CMAKE_PREFIX_PATH` for this.
+
+See also :variable:`CMAKE_SYSTEM_INCLUDE_PATH`,
+:variable:`CMAKE_SYSTEM_LIBRARY_PATH`, :variable:`CMAKE_SYSTEM_PROGRAM_PATH`,
+and :variable:`CMAKE_SYSTEM_IGNORE_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PROCESSOR.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PROCESSOR.rst
new file mode 100644
index 0000000..09280de
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PROCESSOR.rst
@@ -0,0 +1,10 @@
+CMAKE_SYSTEM_PROCESSOR
+----------------------
+
+The name of the CPU CMake is building for.
+
+This variable is the same as :variable:`CMAKE_HOST_SYSTEM_PROCESSOR` if
+you build for the host system instead of the target system when
+cross compiling.
+
+* The :generator:`Green Hills MULTI` generator sets this to ``ARM`` by default.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PROGRAM_PATH.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PROGRAM_PATH.rst
new file mode 100644
index 0000000..cf1b83e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_PROGRAM_PATH.rst
@@ -0,0 +1,8 @@
+CMAKE_SYSTEM_PROGRAM_PATH
+-------------------------
+
+:ref:`;-list <CMake Language Lists>` of directories specifying a search path
+for the :command:`find_program` command.  By default this contains the
+standard directories for the current system.  It is *not* intended to be
+modified by the project; use :variable:`CMAKE_PROGRAM_PATH` for this.
+See also :variable:`CMAKE_SYSTEM_PREFIX_PATH`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_VERSION.rst
new file mode 100644
index 0000000..aba8ca3
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_SYSTEM_VERSION.rst
@@ -0,0 +1,28 @@
+CMAKE_SYSTEM_VERSION
+--------------------
+
+The version of the operating system for which CMake is to build.
+See the :variable:`CMAKE_SYSTEM_NAME` variable for the OS name.
+
+System Version for Host Builds
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When the :variable:`CMAKE_SYSTEM_NAME` variable takes its default value
+then ``CMAKE_SYSTEM_VERSION`` is by default set to the same value as the
+:variable:`CMAKE_HOST_SYSTEM_VERSION` variable so that the build targets
+the host system version.
+
+In the case of a host build then ``CMAKE_SYSTEM_VERSION`` may be set
+explicitly when first configuring a new build tree in order to enable
+targeting the build for a different version of the host operating system
+than is actually running on the host.  This is allowed and not considered
+cross compiling so long as the binaries built for the specified OS version
+can still run on the host.
+
+System Version for Cross Compiling
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When the :variable:`CMAKE_SYSTEM_NAME` variable is set explicitly to
+enable :ref:`cross compiling <Cross Compiling Toolchain>` then the
+value of ``CMAKE_SYSTEM_VERSION`` must also be set explicitly to specify
+the target system version.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_TOOLCHAIN_FILE.rst b/share/cmake-3.6/Help/variable/CMAKE_TOOLCHAIN_FILE.rst
new file mode 100644
index 0000000..168ee74
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_TOOLCHAIN_FILE.rst
@@ -0,0 +1,9 @@
+CMAKE_TOOLCHAIN_FILE
+--------------------
+
+Path to toolchain file supplied to :manual:`cmake(1)`.
+
+This variable is specified on the command line when cross-compiling with CMake.
+It is the path to a file which is read early in the CMake run and which
+specifies locations for compilers and toolchain utilities, and other target
+platform and compiler related information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_CONFIGURATION.rst b/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_CONFIGURATION.rst
new file mode 100644
index 0000000..d731f02
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_CONFIGURATION.rst
@@ -0,0 +1,10 @@
+CMAKE_TRY_COMPILE_CONFIGURATION
+-------------------------------
+
+Build configuration used for :command:`try_compile` and :command:`try_run`
+projects.
+
+Projects built by :command:`try_compile` and :command:`try_run` are built
+synchronously during the CMake configuration step.  Therefore a specific build
+configuration must be chosen even if the generated build system
+supports multiple configurations.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_PLATFORM_VARIABLES.rst b/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_PLATFORM_VARIABLES.rst
new file mode 100644
index 0000000..8e43465
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_PLATFORM_VARIABLES.rst
@@ -0,0 +1,10 @@
+CMAKE_TRY_COMPILE_PLATFORM_VARIABLES
+------------------------------------
+
+List of variables that the :command:`try_compile` command source file signature
+must propagate into the test project in order to target the same platform as
+the host project.
+
+This variable should not be set by project code.  It is meant to be set by
+CMake's platform information modules for the current toolchain, or by a
+toolchain file when used with :variable:`CMAKE_TOOLCHAIN_FILE`.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_TARGET_TYPE.rst b/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_TARGET_TYPE.rst
new file mode 100644
index 0000000..5fa8dfc
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_TRY_COMPILE_TARGET_TYPE.rst
@@ -0,0 +1,15 @@
+CMAKE_TRY_COMPILE_TARGET_TYPE
+-----------------------------
+
+Type of target generated for :command:`try_compile` calls using the
+source file signature.  Valid values are:
+
+``EXECUTABLE``
+  Use :command:`add_executable` to name the source file in the
+  generated project.  This is the default if no value is given.
+
+``STATIC_LIBRARY``
+  Use :command:`add_library` with the ``STATIC`` option to name the
+  source file in the generated project.  This avoids running the
+  linker and is intended for use with cross-compiling toolchains
+  that cannot link without custom flags or linker scripts.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_TWEAK_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_TWEAK_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_TWEAK_VERSION.rst
rename to share/cmake-3.6/Help/variable/CMAKE_TWEAK_VERSION.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE.rst b/share/cmake-3.6/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE.rst
new file mode 100644
index 0000000..9af0d97
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE.rst
@@ -0,0 +1,23 @@
+CMAKE_USER_MAKE_RULES_OVERRIDE
+------------------------------
+
+Specify a CMake file that overrides platform information.
+
+CMake loads the specified file while enabling support for each
+language from either the :command:`project` or :command:`enable_language`
+commands.  It is loaded after CMake's builtin compiler and platform information
+modules have been loaded but before the information is used.  The file
+may set platform information variables to override CMake's defaults.
+
+This feature is intended for use only in overriding information
+variables that must be set before CMake builds its first test project
+to check that the compiler for a language works.  It should not be
+used to load a file in cases that a normal :command:`include` will work.  Use
+it only as a last resort for behavior that cannot be achieved any
+other way.  For example, one may set ``CMAKE_C_FLAGS_INIT`` to change the
+default value used to initialize :variable:`CMAKE_C_FLAGS <CMAKE_<LANG>_FLAGS>`
+before it is cached.  The override file should NOT be used to set anything
+that could be set after languages are enabled, such as variables like
+:variable:`CMAKE_RUNTIME_OUTPUT_DIRECTORY` that affect the placement of
+binaries.  Information set in the file will be used for :command:`try_compile`
+and :command:`try_run` builds too.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG.rst b/share/cmake-3.6/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG.rst
new file mode 100644
index 0000000..e7139ac
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_USER_MAKE_RULES_OVERRIDE_LANG.rst
@@ -0,0 +1,8 @@
+CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG>
+-------------------------------------
+
+Specify a CMake file that overrides platform information for ``<LANG>``.
+
+This is a language-specific version of
+:variable:`CMAKE_USER_MAKE_RULES_OVERRIDE` loaded only when enabling language
+``<LANG>``.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_USE_RELATIVE_PATHS.rst b/share/cmake-3.6/Help/variable/CMAKE_USE_RELATIVE_PATHS.rst
new file mode 100644
index 0000000..06fe0fb
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_USE_RELATIVE_PATHS.rst
@@ -0,0 +1,5 @@
+CMAKE_USE_RELATIVE_PATHS
+------------------------
+
+This variable has no effect.  The partially implemented effect it
+had in previous releases was removed in CMake 3.4.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_VERBOSE_MAKEFILE.rst b/share/cmake-3.6/Help/variable/CMAKE_VERBOSE_MAKEFILE.rst
new file mode 100644
index 0000000..232a2fd
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_VERBOSE_MAKEFILE.rst
@@ -0,0 +1,9 @@
+CMAKE_VERBOSE_MAKEFILE
+----------------------
+
+Enable verbose output from Makefile builds.
+
+This variable is a cache entry initialized (to ``FALSE``) by
+the :command:`project` command.  Users may enable the option
+in their local build tree to get more verbose output from
+Makefile builds and show each command line as it is launched.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_VERSION.rst
rename to share/cmake-3.6/Help/variable/CMAKE_VERSION.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_VISIBILITY_INLINES_HIDDEN.rst b/share/cmake-3.6/Help/variable/CMAKE_VISIBILITY_INLINES_HIDDEN.rst
new file mode 100644
index 0000000..150bacc
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_VISIBILITY_INLINES_HIDDEN.rst
@@ -0,0 +1,5 @@
+CMAKE_VISIBILITY_INLINES_HIDDEN
+-------------------------------
+
+Default value for the :prop_tgt:`VISIBILITY_INLINES_HIDDEN` target
+property when a target is created.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VS_DEVENV_COMMAND.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_DEVENV_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_VS_DEVENV_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CMAKE_VS_DEVENV_COMMAND.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_VS_INCLUDE_INSTALL_TO_DEFAULT_BUILD.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_INCLUDE_INSTALL_TO_DEFAULT_BUILD.rst
new file mode 100644
index 0000000..f54472a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_VS_INCLUDE_INSTALL_TO_DEFAULT_BUILD.rst
@@ -0,0 +1,8 @@
+CMAKE_VS_INCLUDE_INSTALL_TO_DEFAULT_BUILD
+-----------------------------------------
+
+Include ``INSTALL`` target to default build.
+
+In Visual Studio solution, by default the ``INSTALL`` target will not be part
+of the default build. Setting this variable will enable the ``INSTALL`` target
+to be part of the default build.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION.rst
new file mode 100644
index 0000000..0be10e5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_VS_INTEL_Fortran_PROJECT_VERSION.rst
@@ -0,0 +1,7 @@
+CMAKE_VS_INTEL_Fortran_PROJECT_VERSION
+--------------------------------------
+
+When generating for :generator:`Visual Studio 7` or greater with the Intel
+Fortran plugin installed, this specifies the ``.vfproj`` project file format
+version.  This is intended for internal use by CMake and should not be
+used by project code.
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VS_MSBUILD_COMMAND.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_MSBUILD_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_VS_MSBUILD_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CMAKE_VS_MSBUILD_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VS_NsightTegra_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_NsightTegra_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_VS_NsightTegra_VERSION.rst
rename to share/cmake-3.6/Help/variable/CMAKE_VS_NsightTegra_VERSION.rst
diff --git a/share/cmake-3.2/Help/variable/CMAKE_VS_PLATFORM_NAME.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_PLATFORM_NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CMAKE_VS_PLATFORM_NAME.rst
rename to share/cmake-3.6/Help/variable/CMAKE_VS_PLATFORM_NAME.rst
diff --git a/share/cmake-3.6/Help/variable/CMAKE_VS_PLATFORM_TOOLSET.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_PLATFORM_TOOLSET.rst
new file mode 100644
index 0000000..144a41d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_VS_PLATFORM_TOOLSET.rst
@@ -0,0 +1,10 @@
+CMAKE_VS_PLATFORM_TOOLSET
+-------------------------
+
+Visual Studio Platform Toolset name.
+
+VS 10 and above use MSBuild under the hood and support multiple
+compiler toolchains.  CMake may specify a toolset explicitly, such as
+``v110`` for VS 11 or ``Windows7.1SDK`` for 64-bit support in VS 10
+Express.  CMake provides the name of the chosen toolset in this
+variable.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION.rst b/share/cmake-3.6/Help/variable/CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION.rst
new file mode 100644
index 0000000..e0be3a4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION.rst
@@ -0,0 +1,12 @@
+CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION
+----------------------------------------
+
+Visual Studio Windows Target Platform Version.
+
+When targeting Windows 10 and above Visual Studio 2015 and above support
+specification of a target Windows version to select a corresponding SDK.
+The :variable:`CMAKE_SYSTEM_VERSION` variable may be set to specify a
+version.  Otherwise CMake computes a default version based on the Windows
+SDK versions available.  The chosen Windows target version number is provided
+in ``CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION``.  If no Windows 10 SDK
+is available this value will be empty.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_WARN_DEPRECATED.rst b/share/cmake-3.6/Help/variable/CMAKE_WARN_DEPRECATED.rst
new file mode 100644
index 0000000..4a224fa
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_WARN_DEPRECATED.rst
@@ -0,0 +1,10 @@
+CMAKE_WARN_DEPRECATED
+---------------------
+
+Whether to issue warnings for deprecated functionality.
+
+If not ``FALSE``, use of deprecated functionality will issue warnings.
+If this variable is not set, CMake behaves as if it were set to ``TRUE``.
+
+When running :manual:`cmake(1)`, this option can be enabled with the
+``-Wdeprecated`` option, or disabled with the ``-Wno-deprecated`` option.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.6/Help/variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
new file mode 100644
index 0000000..81c1158
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
@@ -0,0 +1,9 @@
+CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
+------------------------------------------
+
+Ask ``cmake_install.cmake`` script to warn each time a file with absolute
+``INSTALL DESTINATION`` is encountered.
+
+This variable is used by CMake-generated ``cmake_install.cmake`` scripts.
+If one sets this variable to ``ON`` while running the script, it may get
+warning messages from the script.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_WIN32_EXECUTABLE.rst b/share/cmake-3.6/Help/variable/CMAKE_WIN32_EXECUTABLE.rst
new file mode 100644
index 0000000..b96abba
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_WIN32_EXECUTABLE.rst
@@ -0,0 +1,7 @@
+CMAKE_WIN32_EXECUTABLE
+----------------------
+
+Default value for :prop_tgt:`WIN32_EXECUTABLE` of targets.
+
+This variable is used to initialize the :prop_tgt:`WIN32_EXECUTABLE` property
+on all the targets.  See that target property for additional information.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS.rst b/share/cmake-3.6/Help/variable/CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS.rst
new file mode 100644
index 0000000..1636842
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS.rst
@@ -0,0 +1,6 @@
+CMAKE_WINDOWS_EXPORT_ALL_SYMBOLS
+--------------------------------
+
+Default value for :prop_tgt:`WINDOWS_EXPORT_ALL_SYMBOLS` target property.
+This variable is used to initialize the property on each target as it is
+created.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_XCODE_ATTRIBUTE_an-attribute.rst b/share/cmake-3.6/Help/variable/CMAKE_XCODE_ATTRIBUTE_an-attribute.rst
new file mode 100644
index 0000000..be683d6
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_XCODE_ATTRIBUTE_an-attribute.rst
@@ -0,0 +1,16 @@
+CMAKE_XCODE_ATTRIBUTE_<an-attribute>
+------------------------------------
+
+Set Xcode target attributes directly.
+
+Tell the :generator:`Xcode` generator to set '<an-attribute>' to a given value
+in the generated Xcode project.  Ignored on other generators.
+
+See the :prop_tgt:`XCODE_ATTRIBUTE_<an-attribute>` target property
+to set attributes on a specific target.
+
+Contents of ``CMAKE_XCODE_ATTRIBUTE_<an-attribute>`` may use
+"generator expressions" with the syntax ``$<...>``.  See the
+:manual:`cmake-generator-expressions(7)` manual for available
+expressions.  See the :manual:`cmake-buildsystem(7)` manual
+for more on defining buildsystem properties.
diff --git a/share/cmake-3.6/Help/variable/CMAKE_XCODE_PLATFORM_TOOLSET.rst b/share/cmake-3.6/Help/variable/CMAKE_XCODE_PLATFORM_TOOLSET.rst
new file mode 100644
index 0000000..210da52
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CMAKE_XCODE_PLATFORM_TOOLSET.rst
@@ -0,0 +1,9 @@
+CMAKE_XCODE_PLATFORM_TOOLSET
+----------------------------
+
+Xcode compiler selection.
+
+:generator:`Xcode` supports selection of a compiler from one of the installed
+toolsets.  CMake provides the name of the chosen toolset in this
+variable, if any is explicitly selected (e.g.  via the :manual:`cmake(1)`
+``-T`` option).
diff --git a/share/cmake-3.6/Help/variable/CPACK_ABSOLUTE_DESTINATION_FILES.rst b/share/cmake-3.6/Help/variable/CPACK_ABSOLUTE_DESTINATION_FILES.rst
new file mode 100644
index 0000000..928fe45
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_ABSOLUTE_DESTINATION_FILES.rst
@@ -0,0 +1,10 @@
+CPACK_ABSOLUTE_DESTINATION_FILES
+--------------------------------
+
+List of files which have been installed using an ``ABSOLUTE DESTINATION`` path.
+
+This variable is a Read-Only variable which is set internally by CPack
+during installation and before packaging using
+:variable:`CMAKE_ABSOLUTE_DESTINATION_FILES` defined in ``cmake_install.cmake``
+scripts.  The value can be used within CPack project configuration
+file and/or ``CPack<GEN>.cmake`` file of ``<GEN>`` generator.
diff --git a/share/cmake-3.6/Help/variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY.rst
new file mode 100644
index 0000000..6cf75e4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY.rst
@@ -0,0 +1,8 @@
+CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY
+------------------------------------------
+
+Boolean toggle to include/exclude top level directory (component case).
+
+Similar usage as :variable:`CPACK_INCLUDE_TOPLEVEL_DIRECTORY` but for the
+component case.  See :variable:`CPACK_INCLUDE_TOPLEVEL_DIRECTORY`
+documentation for the detail.
diff --git a/share/cmake-3.6/Help/variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.6/Help/variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
new file mode 100644
index 0000000..5dad6bd
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION.rst
@@ -0,0 +1,11 @@
+CPACK_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION
+-------------------------------------------
+
+Ask CPack to error out as soon as a file with absolute ``INSTALL DESTINATION``
+is encountered.
+
+The fatal error is emitted before the installation of the offending
+file takes place.  Some CPack generators, like NSIS, enforce this
+internally.  This variable triggers the definition
+of :variable:`CMAKE_ERROR_ON_ABSOLUTE_INSTALL_DESTINATION` when CPack
+runs.
diff --git a/share/cmake-3.6/Help/variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY.rst
new file mode 100644
index 0000000..b8e9105
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_INCLUDE_TOPLEVEL_DIRECTORY.rst
@@ -0,0 +1,20 @@
+CPACK_INCLUDE_TOPLEVEL_DIRECTORY
+--------------------------------
+
+Boolean toggle to include/exclude top level directory.
+
+When preparing a package CPack installs the item under the so-called
+top level directory.  The purpose of is to include (set to ``1`` or ``ON`` or
+``TRUE``) the top level directory in the package or not (set to ``0`` or
+``OFF`` or ``FALSE``).
+
+Each CPack generator has a built-in default value for this variable.
+E.g.  Archive generators (ZIP, TGZ, ...) includes the top level
+whereas RPM or DEB don't.  The user may override the default value by
+setting this variable.
+
+There is a similar variable
+:variable:`CPACK_COMPONENT_INCLUDE_TOPLEVEL_DIRECTORY` which may be used
+to override the behavior for the component packaging
+case which may have different default value for historical (now
+backward compatibility) reason.
diff --git a/share/cmake-3.6/Help/variable/CPACK_INSTALL_SCRIPT.rst b/share/cmake-3.6/Help/variable/CPACK_INSTALL_SCRIPT.rst
new file mode 100644
index 0000000..12a48a4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_INSTALL_SCRIPT.rst
@@ -0,0 +1,8 @@
+CPACK_INSTALL_SCRIPT
+--------------------
+
+Extra CMake script provided by the user.
+
+If set this CMake script will be executed by CPack during its local
+[CPack-private] installation which is done right before packaging the
+files.  The script is not called by e.g.: ``make install``.
diff --git a/share/cmake-3.6/Help/variable/CPACK_PACKAGING_INSTALL_PREFIX.rst b/share/cmake-3.6/Help/variable/CPACK_PACKAGING_INSTALL_PREFIX.rst
new file mode 100644
index 0000000..f423e2e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_PACKAGING_INSTALL_PREFIX.rst
@@ -0,0 +1,15 @@
+CPACK_PACKAGING_INSTALL_PREFIX
+------------------------------
+
+The prefix used in the built package.
+
+Each CPack generator has a default value (like ``/usr``).  This default
+value may be overwritten from the ``CMakeLists.txt`` or the :manual:`cpack(1)`
+command line by setting an alternative value.  Example:
+
+::
+
+  set(CPACK_PACKAGING_INSTALL_PREFIX "/opt")
+
+This is not the same purpose as :variable:`CMAKE_INSTALL_PREFIX` which is used
+when installing from the build tree without building a package.
diff --git a/share/cmake-3.6/Help/variable/CPACK_SET_DESTDIR.rst b/share/cmake-3.6/Help/variable/CPACK_SET_DESTDIR.rst
new file mode 100644
index 0000000..27fd355
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_SET_DESTDIR.rst
@@ -0,0 +1,31 @@
+CPACK_SET_DESTDIR
+-----------------
+
+Boolean toggle to make CPack use ``DESTDIR`` mechanism when packaging.
+
+``DESTDIR`` means DESTination DIRectory.  It is commonly used by makefile
+users in order to install software at non-default location.  It is a
+basic relocation mechanism that should not be used on Windows (see
+:variable:`CMAKE_INSTALL_PREFIX` documentation).  It is usually invoked like
+this:
+
+::
+
+ make DESTDIR=/home/john install
+
+which will install the concerned software using the installation
+prefix, e.g. ``/usr/local`` prepended with the ``DESTDIR`` value which
+finally gives ``/home/john/usr/local``.  When preparing a package, CPack
+first installs the items to be packaged in a local (to the build tree)
+directory by using the same ``DESTDIR`` mechanism.  Nevertheless, if
+``CPACK_SET_DESTDIR`` is set then CPack will set ``DESTDIR`` before doing the
+local install.  The most noticeable difference is that without
+``CPACK_SET_DESTDIR``, CPack uses :variable:`CPACK_PACKAGING_INSTALL_PREFIX`
+as a prefix whereas with ``CPACK_SET_DESTDIR`` set, CPack will use
+:variable:`CMAKE_INSTALL_PREFIX` as a prefix.
+
+Manually setting ``CPACK_SET_DESTDIR`` may help (or simply be necessary)
+if some install rules uses absolute ``DESTINATION`` (see CMake
+:command:`install` command).  However, starting with CPack/CMake 2.8.3 RPM
+and DEB installers tries to handle ``DESTDIR`` automatically so that it is
+seldom necessary for the user to set it.
diff --git a/share/cmake-3.6/Help/variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst b/share/cmake-3.6/Help/variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
new file mode 100644
index 0000000..3fc5cca
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION.rst
@@ -0,0 +1,9 @@
+CPACK_WARN_ON_ABSOLUTE_INSTALL_DESTINATION
+------------------------------------------
+
+Ask CPack to warn each time a file with absolute ``INSTALL DESTINATION`` is
+encountered.
+
+This variable triggers the definition of
+:variable:`CMAKE_WARN_ON_ABSOLUTE_INSTALL_DESTINATION` when CPack runs
+``cmake_install.cmake`` scripts.
diff --git a/share/cmake-3.2/Help/variable/CTEST_BINARY_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CTEST_BINARY_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_BINARY_DIRECTORY.rst
rename to share/cmake-3.6/Help/variable/CTEST_BINARY_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_BUILD_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_BUILD_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_BUILD_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_BUILD_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_BUILD_NAME.rst b/share/cmake-3.6/Help/variable/CTEST_BUILD_NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_BUILD_NAME.rst
rename to share/cmake-3.6/Help/variable/CTEST_BUILD_NAME.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_BZR_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_BZR_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_BZR_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_BZR_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_BZR_UPDATE_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_BZR_UPDATE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_BZR_UPDATE_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_BZR_UPDATE_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/variable/CTEST_CHANGE_ID.rst b/share/cmake-3.6/Help/variable/CTEST_CHANGE_ID.rst
new file mode 100644
index 0000000..a423f49
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CHANGE_ID.rst
@@ -0,0 +1,9 @@
+CTEST_CHANGE_ID
+---------------
+
+Specify the CTest ``ChangeId`` setting
+in a :manual:`ctest(1)` dashboard client script.
+
+This setting allows CTest to pass arbitrary information about this
+build up to CDash.  One use of this feature is to allow CDash to
+post comments on your pull request if anything goes wrong with your build.
diff --git a/share/cmake-3.2/Help/variable/CTEST_CHECKOUT_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_CHECKOUT_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_CHECKOUT_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_CHECKOUT_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_CONFIGURATION_TYPE.rst b/share/cmake-3.6/Help/variable/CTEST_CONFIGURATION_TYPE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_CONFIGURATION_TYPE.rst
rename to share/cmake-3.6/Help/variable/CTEST_CONFIGURATION_TYPE.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_CONFIGURE_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_CONFIGURE_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_CONFIGURE_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_CONFIGURE_COMMAND.rst
diff --git a/share/cmake-3.6/Help/variable/CTEST_COVERAGE_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_COVERAGE_COMMAND.rst
new file mode 100644
index 0000000..a78792e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_COVERAGE_COMMAND.rst
@@ -0,0 +1,60 @@
+CTEST_COVERAGE_COMMAND
+----------------------
+
+Specify the CTest ``CoverageCommand`` setting
+in a :manual:`ctest(1)` dashboard client script.
+
+Cobertura
+'''''''''
+
+Using `Cobertura`_ as the coverage generation within your multi-module
+Java project can generate a series of XML files.
+
+The Cobertura Coverage parser expects to read the coverage data from a
+single XML file which contains the coverage data for all modules.
+Cobertura has a program with the ability to merge given ``cobertura.ser`` files
+and then another program to generate a combined XML file from the previous
+merged file.  For command line testing, this can be done by hand prior to
+CTest looking for the coverage files. For script builds,
+set the ``CTEST_COVERAGE_COMMAND`` variable to point to a file which will
+perform these same steps, such as a ``.sh`` or ``.bat`` file.
+
+.. code-block:: cmake
+
+  set(CTEST_COVERAGE_COMMAND .../run-coverage-and-consolidate.sh)
+
+where the ``run-coverage-and-consolidate.sh`` script is perhaps created by
+the :command:`configure_file` command and might contain the following code:
+
+.. code-block:: bash
+
+  #!/usr/bin/env bash
+  CoberturaFiles="$(find "/path/to/source" -name "cobertura.ser")"
+  SourceDirs="$(find "/path/to/source" -name "java" -type d)"
+  cobertura-merge --datafile coberturamerge.ser $CoberturaFiles
+  cobertura-report --datafile coberturamerge.ser --destination . \
+                   --format xml $SourceDirs
+
+The script uses ``find`` to capture the paths to all of the ``cobertura.ser``
+files found below the project's source directory.  It keeps the list of files
+and supplies it as an argument to the ``cobertura-merge`` program. The
+``--datafile`` argument signifies where the result of the merge will be kept.
+
+The combined ``coberturamerge.ser`` file is then used to generate the XML report
+using the ``cobertura-report`` program.  The call to the cobertura-report
+program requires some named arguments.
+
+``--datafila``
+  path to the merged ``.ser`` file
+
+``--destination``
+  path to put the output files(s)
+
+``--format``
+  file format to write output in: xml or html
+
+The rest of the supplied arguments consist of the full paths to the
+``/src/main/java`` directories of each module within the source tree. These
+directories are needed and should not be forgotten.
+
+.. _`Cobertura`: http://cobertura.github.io/cobertura/
diff --git a/share/cmake-3.2/Help/variable/CTEST_COVERAGE_EXTRA_FLAGS.rst b/share/cmake-3.6/Help/variable/CTEST_COVERAGE_EXTRA_FLAGS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_COVERAGE_EXTRA_FLAGS.rst
rename to share/cmake-3.6/Help/variable/CTEST_COVERAGE_EXTRA_FLAGS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_CURL_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_CURL_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_CURL_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_CURL_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_COVERAGE_EXCLUDE.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_COVERAGE_EXCLUDE.rst
new file mode 100644
index 0000000..d5893c9
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_COVERAGE_EXCLUDE.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_COVERAGE_EXCLUDE
+-----------------------------
+
+A list of regular expressions which will be used to exclude files by their
+path from coverage output by the :command:`ctest_coverage` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_EXCEPTION.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_EXCEPTION.rst
new file mode 100644
index 0000000..cd65ae3
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_EXCEPTION.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_ERROR_EXCEPTION
+----------------------------
+
+A list of regular expressions which will be used to exclude when detecting
+error messages in build outputs by the :command:`ctest_test` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_MATCH.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_MATCH.rst
new file mode 100644
index 0000000..558f5e5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_MATCH.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_ERROR_MATCH
+------------------------
+
+A list of regular expressions which will be used to detect error messages in
+build outputs by the :command:`ctest_test` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_POST_CONTEXT.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_POST_CONTEXT.rst
new file mode 100644
index 0000000..614859b
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_POST_CONTEXT.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_ERROR_POST_CONTEXT
+-------------------------------
+
+The number of lines to include as context which follow an error message by the
+:command:`ctest_test` command. The default is 10.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_PRE_CONTEXT.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_PRE_CONTEXT.rst
new file mode 100644
index 0000000..74dc47a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_ERROR_PRE_CONTEXT.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_ERROR_PRE_CONTEXT
+------------------------------
+
+The number of lines to include as context which precede an error message by
+the :command:`ctest_test` command. The default is 10.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE.rst
new file mode 100644
index 0000000..5aeae88
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE.rst
@@ -0,0 +1,8 @@
+CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE
+--------------------------------------------
+
+When saving a failing test's output, this is the maximum size, in bytes, that
+will be collected by the :command:`ctest_test` command. Defaults to 307200
+(300 KiB).
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_ERRORS.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_ERRORS.rst
new file mode 100644
index 0000000..920cb04
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_ERRORS.rst
@@ -0,0 +1,8 @@
+CTEST_CUSTOM_MAXIMUM_NUMBER_OF_ERRORS
+-------------------------------------
+
+The maximum number of errors in a single build step which will be detected.
+After this, the :command:`ctest_test` command will truncate the output.
+Defaults to 50.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS.rst
new file mode 100644
index 0000000..a1f1cc1
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS.rst
@@ -0,0 +1,8 @@
+CTEST_CUSTOM_MAXIMUM_NUMBER_OF_WARNINGS
+---------------------------------------
+
+The maximum number of warnings in a single build step which will be detected.
+After this, the :command:`ctest_test` command will truncate the output.
+Defaults to 50.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE.rst
new file mode 100644
index 0000000..1fbb8c5
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE.rst
@@ -0,0 +1,8 @@
+CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE
+--------------------------------------------
+
+When saving a passing test's output, this is the maximum size, in bytes, that
+will be collected by the :command:`ctest_test` command. Defaults to 1024
+(1 KiB).
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MEMCHECK_IGNORE.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MEMCHECK_IGNORE.rst
new file mode 100644
index 0000000..578576c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_MEMCHECK_IGNORE.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_MEMCHECK_IGNORE
+----------------------------
+
+A list of regular expressions to use to exclude tests during the
+:command:`ctest_memcheck` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_POST_MEMCHECK.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_POST_MEMCHECK.rst
new file mode 100644
index 0000000..40291fe
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_POST_MEMCHECK.rst
@@ -0,0 +1,6 @@
+CTEST_CUSTOM_POST_MEMCHECK
+--------------------------
+
+A list of commands to run at the end of the :command:`ctest_memcheck` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_POST_TEST.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_POST_TEST.rst
new file mode 100644
index 0000000..791292c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_POST_TEST.rst
@@ -0,0 +1,6 @@
+CTEST_CUSTOM_POST_TEST
+----------------------
+
+A list of commands to run at the end of the :command:`ctest_test` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_PRE_MEMCHECK.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_PRE_MEMCHECK.rst
new file mode 100644
index 0000000..00de8aa
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_PRE_MEMCHECK.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_PRE_MEMCHECK
+-------------------------
+
+A list of commands to run at the start of the :command:`ctest_memcheck`
+command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_PRE_TEST.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_PRE_TEST.rst
new file mode 100644
index 0000000..6af7152
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_PRE_TEST.rst
@@ -0,0 +1,6 @@
+CTEST_CUSTOM_PRE_TEST
+----------------------
+
+A list of commands to run at the start of the :command:`ctest_test` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_TEST_IGNORE.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_TEST_IGNORE.rst
new file mode 100644
index 0000000..6114e60
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_TEST_IGNORE.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_TEST_IGNORE
+------------------------
+
+A list of regular expressions to use to exclude tests during the
+:command:`ctest_test` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_WARNING_EXCEPTION.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_WARNING_EXCEPTION.rst
new file mode 100644
index 0000000..36fa37d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_WARNING_EXCEPTION.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_WARNING_EXCEPTION
+------------------------------
+
+A list of regular expressions which will be used to exclude when detecting
+warning messages in build outputs by the :command:`ctest_test` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_WARNING_MATCH.rst b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_WARNING_MATCH.rst
new file mode 100644
index 0000000..a35be96
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_WARNING_MATCH.rst
@@ -0,0 +1,7 @@
+CTEST_CUSTOM_WARNING_MATCH
+--------------------------
+
+A list of regular expressions which will be used to detect warning messages in
+build outputs by the :command:`ctest_test` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.6/Help/variable/CTEST_CUSTOM_XXX.txt b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_XXX.txt
new file mode 100644
index 0000000..02d1547
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_CUSTOM_XXX.txt
@@ -0,0 +1,2 @@
+It is initialized by :manual:`ctest(1)`, but may be edited in a ``CTestCustom``
+file. See :command:`ctest_read_custom_files` documentation.
diff --git a/share/cmake-3.2/Help/variable/CTEST_CVS_CHECKOUT.rst b/share/cmake-3.6/Help/variable/CTEST_CVS_CHECKOUT.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_CVS_CHECKOUT.rst
rename to share/cmake-3.6/Help/variable/CTEST_CVS_CHECKOUT.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_CVS_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_CVS_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_CVS_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_CVS_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_CVS_UPDATE_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_CVS_UPDATE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_CVS_UPDATE_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_CVS_UPDATE_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_DROP_LOCATION.rst b/share/cmake-3.6/Help/variable/CTEST_DROP_LOCATION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_DROP_LOCATION.rst
rename to share/cmake-3.6/Help/variable/CTEST_DROP_LOCATION.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_DROP_METHOD.rst b/share/cmake-3.6/Help/variable/CTEST_DROP_METHOD.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_DROP_METHOD.rst
rename to share/cmake-3.6/Help/variable/CTEST_DROP_METHOD.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_DROP_SITE.rst b/share/cmake-3.6/Help/variable/CTEST_DROP_SITE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_DROP_SITE.rst
rename to share/cmake-3.6/Help/variable/CTEST_DROP_SITE.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_DROP_SITE_CDASH.rst b/share/cmake-3.6/Help/variable/CTEST_DROP_SITE_CDASH.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_DROP_SITE_CDASH.rst
rename to share/cmake-3.6/Help/variable/CTEST_DROP_SITE_CDASH.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_DROP_SITE_PASSWORD.rst b/share/cmake-3.6/Help/variable/CTEST_DROP_SITE_PASSWORD.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_DROP_SITE_PASSWORD.rst
rename to share/cmake-3.6/Help/variable/CTEST_DROP_SITE_PASSWORD.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_DROP_SITE_USER.rst b/share/cmake-3.6/Help/variable/CTEST_DROP_SITE_USER.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_DROP_SITE_USER.rst
rename to share/cmake-3.6/Help/variable/CTEST_DROP_SITE_USER.rst
diff --git a/share/cmake-3.6/Help/variable/CTEST_EXTRA_COVERAGE_GLOB.rst b/share/cmake-3.6/Help/variable/CTEST_EXTRA_COVERAGE_GLOB.rst
new file mode 100644
index 0000000..286f7df
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_EXTRA_COVERAGE_GLOB.rst
@@ -0,0 +1,7 @@
+CTEST_EXTRA_COVERAGE_GLOB
+-------------------------
+
+A list of regular expressions which will be used to find files which should be
+covered by the :command:`ctest_coverage` command.
+
+.. include:: CTEST_CUSTOM_XXX.txt
diff --git a/share/cmake-3.2/Help/variable/CTEST_GIT_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_GIT_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_GIT_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_GIT_COMMAND.rst
diff --git a/share/cmake-3.6/Help/variable/CTEST_GIT_INIT_SUBMODULES.rst b/share/cmake-3.6/Help/variable/CTEST_GIT_INIT_SUBMODULES.rst
new file mode 100644
index 0000000..fd27003
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_GIT_INIT_SUBMODULES.rst
@@ -0,0 +1,5 @@
+CTEST_GIT_INIT_SUBMODULES
+-------------------------
+
+Specify the CTest ``GITInitSubmodules`` setting
+in a :manual:`ctest(1)` dashboard client script.
diff --git a/share/cmake-3.2/Help/variable/CTEST_GIT_UPDATE_CUSTOM.rst b/share/cmake-3.6/Help/variable/CTEST_GIT_UPDATE_CUSTOM.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_GIT_UPDATE_CUSTOM.rst
rename to share/cmake-3.6/Help/variable/CTEST_GIT_UPDATE_CUSTOM.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_GIT_UPDATE_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_GIT_UPDATE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_GIT_UPDATE_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_GIT_UPDATE_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_HG_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_HG_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_HG_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_HG_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_HG_UPDATE_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_HG_UPDATE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_HG_UPDATE_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_HG_UPDATE_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_COMMAND_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_COMMAND_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_COMMAND_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_COMMAND_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_SANITIZER_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_SANITIZER_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_SANITIZER_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_SANITIZER_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_SUPPRESSIONS_FILE.rst b/share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_SUPPRESSIONS_FILE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_MEMORYCHECK_SUPPRESSIONS_FILE.rst
rename to share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_SUPPRESSIONS_FILE.rst
diff --git a/share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_TYPE.rst b/share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_TYPE.rst
new file mode 100644
index 0000000..b963293
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_MEMORYCHECK_TYPE.rst
@@ -0,0 +1,8 @@
+CTEST_MEMORYCHECK_TYPE
+----------------------
+
+Specify the CTest ``MemoryCheckType`` setting
+in a :manual:`ctest(1)` dashboard client script.
+Valid values are ``Valgrind``, ``Purify``, ``BoundsChecker``, and
+``ThreadSanitizer``, ``AddressSanitizer``, ``MemorySanitizer``, and
+``UndefinedBehaviorSanitizer``.
diff --git a/share/cmake-3.2/Help/variable/CTEST_NIGHTLY_START_TIME.rst b/share/cmake-3.6/Help/variable/CTEST_NIGHTLY_START_TIME.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_NIGHTLY_START_TIME.rst
rename to share/cmake-3.6/Help/variable/CTEST_NIGHTLY_START_TIME.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_P4_CLIENT.rst b/share/cmake-3.6/Help/variable/CTEST_P4_CLIENT.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_P4_CLIENT.rst
rename to share/cmake-3.6/Help/variable/CTEST_P4_CLIENT.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_P4_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_P4_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_P4_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_P4_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_P4_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_P4_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_P4_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_P4_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_P4_UPDATE_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_P4_UPDATE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_P4_UPDATE_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_P4_UPDATE_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_SCP_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_SCP_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_SCP_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_SCP_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_SITE.rst b/share/cmake-3.6/Help/variable/CTEST_SITE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_SITE.rst
rename to share/cmake-3.6/Help/variable/CTEST_SITE.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_SOURCE_DIRECTORY.rst b/share/cmake-3.6/Help/variable/CTEST_SOURCE_DIRECTORY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_SOURCE_DIRECTORY.rst
rename to share/cmake-3.6/Help/variable/CTEST_SOURCE_DIRECTORY.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_SVN_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_SVN_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_SVN_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_SVN_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_SVN_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_SVN_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_SVN_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_SVN_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_SVN_UPDATE_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_SVN_UPDATE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_SVN_UPDATE_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_SVN_UPDATE_OPTIONS.rst
diff --git a/share/cmake-3.6/Help/variable/CTEST_TEST_LOAD.rst b/share/cmake-3.6/Help/variable/CTEST_TEST_LOAD.rst
new file mode 100644
index 0000000..80823fe
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CTEST_TEST_LOAD.rst
@@ -0,0 +1,7 @@
+CTEST_TEST_LOAD
+---------------
+
+Specify the ``TestLoad`` setting in the :ref:`CTest Test Step`
+of a :manual:`ctest(1)` dashboard client script.  This sets the
+default value for the ``TEST_LOAD`` option of the :command:`ctest_test`
+command.
diff --git a/share/cmake-3.2/Help/variable/CTEST_TEST_TIMEOUT.rst b/share/cmake-3.6/Help/variable/CTEST_TEST_TIMEOUT.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_TEST_TIMEOUT.rst
rename to share/cmake-3.6/Help/variable/CTEST_TEST_TIMEOUT.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_TRIGGER_SITE.rst b/share/cmake-3.6/Help/variable/CTEST_TRIGGER_SITE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_TRIGGER_SITE.rst
rename to share/cmake-3.6/Help/variable/CTEST_TRIGGER_SITE.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_UPDATE_COMMAND.rst b/share/cmake-3.6/Help/variable/CTEST_UPDATE_COMMAND.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_UPDATE_COMMAND.rst
rename to share/cmake-3.6/Help/variable/CTEST_UPDATE_COMMAND.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_UPDATE_OPTIONS.rst b/share/cmake-3.6/Help/variable/CTEST_UPDATE_OPTIONS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_UPDATE_OPTIONS.rst
rename to share/cmake-3.6/Help/variable/CTEST_UPDATE_OPTIONS.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_UPDATE_VERSION_ONLY.rst b/share/cmake-3.6/Help/variable/CTEST_UPDATE_VERSION_ONLY.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_UPDATE_VERSION_ONLY.rst
rename to share/cmake-3.6/Help/variable/CTEST_UPDATE_VERSION_ONLY.rst
diff --git a/share/cmake-3.2/Help/variable/CTEST_USE_LAUNCHERS.rst b/share/cmake-3.6/Help/variable/CTEST_USE_LAUNCHERS.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/CTEST_USE_LAUNCHERS.rst
rename to share/cmake-3.6/Help/variable/CTEST_USE_LAUNCHERS.rst
diff --git a/share/cmake-3.6/Help/variable/CYGWIN.rst b/share/cmake-3.6/Help/variable/CYGWIN.rst
new file mode 100644
index 0000000..0039e07
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/CYGWIN.rst
@@ -0,0 +1,6 @@
+CYGWIN
+------
+
+``True`` for Cygwin.
+
+Set to ``true`` when using Cygwin.
diff --git a/share/cmake-3.6/Help/variable/ENV.rst b/share/cmake-3.6/Help/variable/ENV.rst
new file mode 100644
index 0000000..368152a
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/ENV.rst
@@ -0,0 +1,7 @@
+ENV
+---
+
+Access environment variables.
+
+Use the syntax ``$ENV{VAR}`` to read environment variable ``VAR``.  See also
+the :command:`set` command to set ``ENV{VAR}``.
diff --git a/share/cmake-3.6/Help/variable/EXECUTABLE_OUTPUT_PATH.rst b/share/cmake-3.6/Help/variable/EXECUTABLE_OUTPUT_PATH.rst
new file mode 100644
index 0000000..26d3e92
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/EXECUTABLE_OUTPUT_PATH.rst
@@ -0,0 +1,8 @@
+EXECUTABLE_OUTPUT_PATH
+----------------------
+
+Old executable location variable.
+
+The target property :prop_tgt:`RUNTIME_OUTPUT_DIRECTORY` supercedes this
+variable for a target if it is set.  Executable targets are otherwise placed in
+this directory.
diff --git a/share/cmake-3.6/Help/variable/GHS-MULTI.rst b/share/cmake-3.6/Help/variable/GHS-MULTI.rst
new file mode 100644
index 0000000..0f91be8
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/GHS-MULTI.rst
@@ -0,0 +1,4 @@
+GHS-MULTI
+---------
+
+True when using Green Hills MULTI
diff --git a/share/cmake-3.6/Help/variable/LIBRARY_OUTPUT_PATH.rst b/share/cmake-3.6/Help/variable/LIBRARY_OUTPUT_PATH.rst
new file mode 100644
index 0000000..ba02911
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/LIBRARY_OUTPUT_PATH.rst
@@ -0,0 +1,9 @@
+LIBRARY_OUTPUT_PATH
+-------------------
+
+Old library location variable.
+
+The target properties :prop_tgt:`ARCHIVE_OUTPUT_DIRECTORY`,
+:prop_tgt:`LIBRARY_OUTPUT_DIRECTORY`, and :prop_tgt:`RUNTIME_OUTPUT_DIRECTORY`
+supercede this variable for a target if they are set.  Library targets are
+otherwise placed in this directory.
diff --git a/share/cmake-3.6/Help/variable/MINGW.rst b/share/cmake-3.6/Help/variable/MINGW.rst
new file mode 100644
index 0000000..6d29be4
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MINGW.rst
@@ -0,0 +1,6 @@
+MINGW
+-----
+
+``True`` when using MinGW
+
+Set to ``true`` when the compiler is some version of MinGW.
diff --git a/share/cmake-3.6/Help/variable/MSVC.rst b/share/cmake-3.6/Help/variable/MSVC.rst
new file mode 100644
index 0000000..913ed08
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC.rst
@@ -0,0 +1,6 @@
+MSVC
+----
+
+``True`` when using Microsoft Visual C++.
+
+Set to ``true`` when the compiler is some version of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC10.rst b/share/cmake-3.6/Help/variable/MSVC10.rst
new file mode 100644
index 0000000..33692ad
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC10.rst
@@ -0,0 +1,6 @@
+MSVC10
+------
+
+``True`` when using Microsoft Visual C++ 10.0
+
+Set to ``true`` when the compiler is version 10.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC11.rst b/share/cmake-3.6/Help/variable/MSVC11.rst
new file mode 100644
index 0000000..3ab606d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC11.rst
@@ -0,0 +1,6 @@
+MSVC11
+------
+
+``True`` when using Microsoft Visual C++ 11.0
+
+Set to ``true`` when the compiler is version 11.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC12.rst b/share/cmake-3.6/Help/variable/MSVC12.rst
new file mode 100644
index 0000000..15fa64b
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC12.rst
@@ -0,0 +1,6 @@
+MSVC12
+------
+
+``True`` when using Microsoft Visual C++ 12.0.
+
+Set to ``true`` when the compiler is version 12.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC14.rst b/share/cmake-3.6/Help/variable/MSVC14.rst
new file mode 100644
index 0000000..0b9125d
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC14.rst
@@ -0,0 +1,6 @@
+MSVC14
+------
+
+``True`` when using Microsoft Visual C++ 14.0.
+
+Set to ``true`` when the compiler is version 14.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC60.rst b/share/cmake-3.6/Help/variable/MSVC60.rst
new file mode 100644
index 0000000..14f09cf
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC60.rst
@@ -0,0 +1,6 @@
+MSVC60
+------
+
+``True`` when using Microsoft Visual C++ 6.0.
+
+Set to ``true`` when the compiler is version 6.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC70.rst b/share/cmake-3.6/Help/variable/MSVC70.rst
new file mode 100644
index 0000000..76fa96f
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC70.rst
@@ -0,0 +1,6 @@
+MSVC70
+------
+
+``True`` when using Microsoft Visual C++ 7.0.
+
+Set to ``true`` when the compiler is version 7.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC71.rst b/share/cmake-3.6/Help/variable/MSVC71.rst
new file mode 100644
index 0000000..d69d4fc
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC71.rst
@@ -0,0 +1,6 @@
+MSVC71
+------
+
+``True`` when using Microsoft Visual C++ 7.1.
+
+Set to ``true`` when the compiler is version 7.1 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC80.rst b/share/cmake-3.6/Help/variable/MSVC80.rst
new file mode 100644
index 0000000..b17777c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC80.rst
@@ -0,0 +1,6 @@
+MSVC80
+------
+
+``True`` when using Microsoft Visual C++ 8.0.
+
+Set to ``true`` when the compiler is version 8.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC90.rst b/share/cmake-3.6/Help/variable/MSVC90.rst
new file mode 100644
index 0000000..7162d6c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC90.rst
@@ -0,0 +1,6 @@
+MSVC90
+------
+
+``True`` when using Microsoft Visual C++ 9.0.
+
+Set to ``true`` when the compiler is version 9.0 of Microsoft Visual C++.
diff --git a/share/cmake-3.6/Help/variable/MSVC_IDE.rst b/share/cmake-3.6/Help/variable/MSVC_IDE.rst
new file mode 100644
index 0000000..027d1bc
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/MSVC_IDE.rst
@@ -0,0 +1,7 @@
+MSVC_IDE
+--------
+
+``True`` when using the Microsoft Visual C++ IDE.
+
+Set to ``true`` when the target platform is the Microsoft Visual C++ IDE, as
+opposed to the command line compiler.
diff --git a/share/cmake-3.2/Help/variable/MSVC_VERSION.rst b/share/cmake-3.6/Help/variable/MSVC_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/MSVC_VERSION.rst
rename to share/cmake-3.6/Help/variable/MSVC_VERSION.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT-NAME_BINARY_DIR.rst b/share/cmake-3.6/Help/variable/PROJECT-NAME_BINARY_DIR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT-NAME_BINARY_DIR.rst
rename to share/cmake-3.6/Help/variable/PROJECT-NAME_BINARY_DIR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT-NAME_SOURCE_DIR.rst b/share/cmake-3.6/Help/variable/PROJECT-NAME_SOURCE_DIR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT-NAME_SOURCE_DIR.rst
rename to share/cmake-3.6/Help/variable/PROJECT-NAME_SOURCE_DIR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION.rst b/share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION.rst
rename to share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_MAJOR.rst b/share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_MAJOR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_MAJOR.rst
rename to share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_MAJOR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_MINOR.rst b/share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_MINOR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_MINOR.rst
rename to share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_MINOR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_PATCH.rst b/share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_PATCH.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_PATCH.rst
rename to share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_PATCH.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_TWEAK.rst b/share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_TWEAK.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT-NAME_VERSION_TWEAK.rst
rename to share/cmake-3.6/Help/variable/PROJECT-NAME_VERSION_TWEAK.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_BINARY_DIR.rst b/share/cmake-3.6/Help/variable/PROJECT_BINARY_DIR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_BINARY_DIR.rst
rename to share/cmake-3.6/Help/variable/PROJECT_BINARY_DIR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_NAME.rst b/share/cmake-3.6/Help/variable/PROJECT_NAME.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_NAME.rst
rename to share/cmake-3.6/Help/variable/PROJECT_NAME.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_SOURCE_DIR.rst b/share/cmake-3.6/Help/variable/PROJECT_SOURCE_DIR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_SOURCE_DIR.rst
rename to share/cmake-3.6/Help/variable/PROJECT_SOURCE_DIR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_VERSION.rst b/share/cmake-3.6/Help/variable/PROJECT_VERSION.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_VERSION.rst
rename to share/cmake-3.6/Help/variable/PROJECT_VERSION.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_VERSION_MAJOR.rst b/share/cmake-3.6/Help/variable/PROJECT_VERSION_MAJOR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_VERSION_MAJOR.rst
rename to share/cmake-3.6/Help/variable/PROJECT_VERSION_MAJOR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_VERSION_MINOR.rst b/share/cmake-3.6/Help/variable/PROJECT_VERSION_MINOR.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_VERSION_MINOR.rst
rename to share/cmake-3.6/Help/variable/PROJECT_VERSION_MINOR.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_VERSION_PATCH.rst b/share/cmake-3.6/Help/variable/PROJECT_VERSION_PATCH.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_VERSION_PATCH.rst
rename to share/cmake-3.6/Help/variable/PROJECT_VERSION_PATCH.rst
diff --git a/share/cmake-3.2/Help/variable/PROJECT_VERSION_TWEAK.rst b/share/cmake-3.6/Help/variable/PROJECT_VERSION_TWEAK.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/PROJECT_VERSION_TWEAK.rst
rename to share/cmake-3.6/Help/variable/PROJECT_VERSION_TWEAK.rst
diff --git a/share/cmake-3.6/Help/variable/UNIX.rst b/share/cmake-3.6/Help/variable/UNIX.rst
new file mode 100644
index 0000000..0877b7c
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/UNIX.rst
@@ -0,0 +1,7 @@
+UNIX
+----
+
+``True`` for UNIX and UNIX like operating systems.
+
+Set to ``true`` when the target system is UNIX or UNIX like (i.e.
+:variable:`APPLE` and :variable:`CYGWIN`).
diff --git a/share/cmake-3.6/Help/variable/WIN32.rst b/share/cmake-3.6/Help/variable/WIN32.rst
new file mode 100644
index 0000000..2189069
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/WIN32.rst
@@ -0,0 +1,6 @@
+WIN32
+-----
+
+``True`` on Windows systems, including Win64.
+
+Set to ``true`` when the target system is Windows.
diff --git a/share/cmake-3.2/Help/variable/WINCE.rst b/share/cmake-3.6/Help/variable/WINCE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/WINCE.rst
rename to share/cmake-3.6/Help/variable/WINCE.rst
diff --git a/share/cmake-3.2/Help/variable/WINDOWS_PHONE.rst b/share/cmake-3.6/Help/variable/WINDOWS_PHONE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/WINDOWS_PHONE.rst
rename to share/cmake-3.6/Help/variable/WINDOWS_PHONE.rst
diff --git a/share/cmake-3.2/Help/variable/WINDOWS_STORE.rst b/share/cmake-3.6/Help/variable/WINDOWS_STORE.rst
similarity index 100%
rename from share/cmake-3.2/Help/variable/WINDOWS_STORE.rst
rename to share/cmake-3.6/Help/variable/WINDOWS_STORE.rst
diff --git a/share/cmake-3.6/Help/variable/XCODE_VERSION.rst b/share/cmake-3.6/Help/variable/XCODE_VERSION.rst
new file mode 100644
index 0000000..b85d41e
--- /dev/null
+++ b/share/cmake-3.6/Help/variable/XCODE_VERSION.rst
@@ -0,0 +1,7 @@
+XCODE_VERSION
+-------------
+
+Version of Xcode (:generator:`Xcode` generator only).
+
+Under the Xcode generator, this is the version of Xcode as specified
+in ``Xcode.app/Contents/version.plist`` (such as ``3.1.2``).
diff --git a/share/cmake-3.2/Modules/AddFileDependencies.cmake b/share/cmake-3.6/Modules/AddFileDependencies.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/AddFileDependencies.cmake
rename to share/cmake-3.6/Modules/AddFileDependencies.cmake
diff --git a/share/cmake-3.6/Modules/AndroidNdkGdb.cmake b/share/cmake-3.6/Modules/AndroidNdkGdb.cmake
new file mode 100644
index 0000000..0677dcd
--- /dev/null
+++ b/share/cmake-3.6/Modules/AndroidNdkGdb.cmake
@@ -0,0 +1,96 @@
+# Copyright (c) 2014, Pavel Rojtberg
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its
+# contributors may be used to endorse or promote products derived from this
+# software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+# ------------------------------------------------------------------------------
+# Usage:
+# 1. place AndroidNdkGdb.cmake somewhere inside ${CMAKE_MODULE_PATH}
+# 2. inside your project add
+#
+#    include(AndroidNdkGdb)
+#    android_ndk_gdb_enable()
+#    # for each target
+#    add_library(MyLibrary ...)
+#    android_ndk_gdb_debuggable(MyLibrary)    
+
+
+# add gdbserver and general gdb configuration to project
+# also create a mininal NDK skeleton so ndk-gdb finds the paths
+#
+# the optional parameter defines the path to the android project.
+# uses PROJECT_SOURCE_DIR by default.
+macro(android_ndk_gdb_enable)
+    if(ANDROID)
+        # create custom target that depends on the real target so it gets executed afterwards
+        add_custom_target(NDK_GDB ALL)
+        
+        if(${ARGC})
+            set(ANDROID_PROJECT_DIR ${ARGV0})
+        else()
+            set(ANDROID_PROJECT_DIR ${PROJECT_SOURCE_DIR})
+        endif()
+
+        set(NDK_GDB_SOLIB_PATH ${ANDROID_PROJECT_DIR}/obj/local/${ANDROID_NDK_ABI_NAME}/)
+        file(MAKE_DIRECTORY ${NDK_GDB_SOLIB_PATH})
+        
+        # 1. generate essential Android Makefiles
+        file(MAKE_DIRECTORY ${ANDROID_PROJECT_DIR}/jni)
+        if(NOT EXISTS ${ANDROID_PROJECT_DIR}/jni/Android.mk)
+            file(WRITE ${ANDROID_PROJECT_DIR}/jni/Android.mk "APP_ABI := ${ANDROID_NDK_ABI_NAME}\n")
+        endif()
+        if(NOT EXISTS ${ANDROID_PROJECT_DIR}/jni/Application.mk)
+            file(WRITE ${ANDROID_PROJECT_DIR}/jni/Application.mk "APP_ABI := ${ANDROID_NDK_ABI_NAME}\n")
+        endif()
+    
+        # 2. generate gdb.setup
+        get_directory_property(PROJECT_INCLUDES DIRECTORY ${PROJECT_SOURCE_DIR} INCLUDE_DIRECTORIES)
+        string(REGEX REPLACE ";" " " PROJECT_INCLUDES "${PROJECT_INCLUDES}")
+        file(WRITE ${LIBRARY_OUTPUT_PATH}/gdb.setup "set solib-search-path ${NDK_GDB_SOLIB_PATH}\n")
+        file(APPEND ${LIBRARY_OUTPUT_PATH}/gdb.setup "directory ${PROJECT_INCLUDES}\n")
+    
+        # 3. copy gdbserver executable
+        file(COPY ${ANDROID_NDK}/prebuilt/android-${ANDROID_ARCH_NAME}/gdbserver/gdbserver DESTINATION ${LIBRARY_OUTPUT_PATH})
+    endif()
+endmacro()
+
+# register a target for remote debugging
+# copies the debug version to NDK_GDB_SOLIB_PATH then strips symbols of original
+macro(android_ndk_gdb_debuggable TARGET_NAME)
+    if(ANDROID)
+        get_property(TARGET_LOCATION TARGET ${TARGET_NAME} PROPERTY LOCATION)
+        
+        # create custom target that depends on the real target so it gets executed afterwards
+        add_dependencies(NDK_GDB ${TARGET_NAME})
+    
+        # 4. copy lib to obj
+        add_custom_command(TARGET NDK_GDB POST_BUILD COMMAND ${CMAKE_COMMAND} -E copy_if_different ${TARGET_LOCATION} ${NDK_GDB_SOLIB_PATH})
+    
+        # 5. strip symbols
+        add_custom_command(TARGET NDK_GDB POST_BUILD COMMAND ${CMAKE_STRIP} ${TARGET_LOCATION})
+    endif()
+endmacro()
diff --git a/share/cmake-3.6/Modules/AndroidNdkModules.cmake b/share/cmake-3.6/Modules/AndroidNdkModules.cmake
new file mode 100644
index 0000000..64f37fd
--- /dev/null
+++ b/share/cmake-3.6/Modules/AndroidNdkModules.cmake
@@ -0,0 +1,58 @@
+# Copyright (c) 2014, Pavel Rojtberg
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its
+# contributors may be used to endorse or promote products derived from this
+# software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+macro(android_ndk_import_module_cpufeatures)
+    if(ANDROID)
+        include_directories(${ANDROID_NDK}/sources/android/cpufeatures)
+        add_library(cpufeatures ${ANDROID_NDK}/sources/android/cpufeatures/cpu-features.c)
+        target_link_libraries(cpufeatures dl)
+    endif()
+endmacro()
+
+macro(android_ndk_import_module_native_app_glue)
+    if(ANDROID)
+        include_directories(${ANDROID_NDK}/sources/android/native_app_glue)
+        add_library(native_app_glue ${ANDROID_NDK}/sources/android/native_app_glue/android_native_app_glue.c)
+        target_link_libraries(native_app_glue log)
+    endif()
+endmacro()
+
+macro(android_ndk_import_module_ndk_helper)
+    if(ANDROID)
+        android_ndk_import_module_cpufeatures()
+        android_ndk_import_module_native_app_glue()
+        
+        include_directories(${ANDROID_NDK}/sources/android/ndk_helper)
+        file(GLOB _NDK_HELPER_SRCS ${ANDROID_NDK}/sources/android/ndk_helper/*.cpp ${ANDROID_NDK}/sources/android/ndk_helper/gl3stub.c)
+        add_library(ndk_helper ${_NDK_HELPER_SRCS})
+        target_link_libraries(ndk_helper log android EGL GLESv2 cpufeatures native_app_glue)
+        
+        unset(_NDK_HELPER_SRCS)
+    endif()
+endmacro()
\ No newline at end of file
diff --git a/share/cmake-3.2/Modules/AutogenInfo.cmake.in b/share/cmake-3.6/Modules/AutogenInfo.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/AutogenInfo.cmake.in
rename to share/cmake-3.6/Modules/AutogenInfo.cmake.in
diff --git a/share/cmake-3.6/Modules/BasicConfigVersion-AnyNewerVersion.cmake.in b/share/cmake-3.6/Modules/BasicConfigVersion-AnyNewerVersion.cmake.in
new file mode 100644
index 0000000..bc78016
--- /dev/null
+++ b/share/cmake-3.6/Modules/BasicConfigVersion-AnyNewerVersion.cmake.in
@@ -0,0 +1,31 @@
+# This is a basic version file for the Config-mode of find_package().
+# It is used by write_basic_package_version_file() as input file for configure_file()
+# to create a version-file which can be installed along a config.cmake file.
+#
+# The created file sets PACKAGE_VERSION_EXACT if the current version string and
+# the requested version string are exactly the same and it sets
+# PACKAGE_VERSION_COMPATIBLE if the current version is >= requested version.
+# The variable CVF_VERSION must be set before calling configure_file().
+
+set(PACKAGE_VERSION "@CVF_VERSION@")
+
+if(PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION)
+  set(PACKAGE_VERSION_COMPATIBLE FALSE)
+else()
+  set(PACKAGE_VERSION_COMPATIBLE TRUE)
+  if(PACKAGE_FIND_VERSION STREQUAL PACKAGE_VERSION)
+    set(PACKAGE_VERSION_EXACT TRUE)
+  endif()
+endif()
+
+# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
+if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "")
+   return()
+endif()
+
+# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
+if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "@CMAKE_SIZEOF_VOID_P@")
+   math(EXPR installedBits "@CMAKE_SIZEOF_VOID_P@ * 8")
+   set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
+   set(PACKAGE_VERSION_UNSUITABLE TRUE)
+endif()
diff --git a/share/cmake-3.6/Modules/BasicConfigVersion-ExactVersion.cmake.in b/share/cmake-3.6/Modules/BasicConfigVersion-ExactVersion.cmake.in
new file mode 100644
index 0000000..de4a23a
--- /dev/null
+++ b/share/cmake-3.6/Modules/BasicConfigVersion-ExactVersion.cmake.in
@@ -0,0 +1,47 @@
+# This is a basic version file for the Config-mode of find_package().
+# It is used by write_basic_package_version_file() as input file for configure_file()
+# to create a version-file which can be installed along a config.cmake file.
+#
+# The created file sets PACKAGE_VERSION_EXACT if the current version string and
+# the requested version string are exactly the same and it sets
+# PACKAGE_VERSION_COMPATIBLE if the current version is equal to the requested version.
+# The tweak version component is ignored.
+# The variable CVF_VERSION must be set before calling configure_file().
+
+
+set(PACKAGE_VERSION "@CVF_VERSION@")
+
+if("@CVF_VERSION@" MATCHES "^([0-9]+\\.[0-9]+\\.[0-9]+)\\.") # strip the tweak version
+  set(CVF_VERSION_NO_TWEAK "${CMAKE_MATCH_1}")
+else()
+  set(CVF_VERSION_NO_TWEAK "@CVF_VERSION@")
+endif()
+
+if(PACKAGE_FIND_VERSION MATCHES "^([0-9]+\\.[0-9]+\\.[0-9]+)\\.") # strip the tweak version
+  set(REQUESTED_VERSION_NO_TWEAK "${CMAKE_MATCH_1}")
+else()
+  set(REQUESTED_VERSION_NO_TWEAK "${PACKAGE_FIND_VERSION}")
+endif()
+
+if(REQUESTED_VERSION_NO_TWEAK STREQUAL CVF_VERSION_NO_TWEAK)
+  set(PACKAGE_VERSION_COMPATIBLE TRUE)
+else()
+  set(PACKAGE_VERSION_COMPATIBLE FALSE)
+endif()
+
+if(PACKAGE_FIND_VERSION STREQUAL PACKAGE_VERSION)
+  set(PACKAGE_VERSION_EXACT TRUE)
+endif()
+
+
+# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
+if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "")
+   return()
+endif()
+
+# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
+if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "@CMAKE_SIZEOF_VOID_P@")
+  math(EXPR installedBits "@CMAKE_SIZEOF_VOID_P@ * 8")
+  set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
+  set(PACKAGE_VERSION_UNSUITABLE TRUE)
+endif()
diff --git a/share/cmake-3.6/Modules/BasicConfigVersion-SameMajorVersion.cmake.in b/share/cmake-3.6/Modules/BasicConfigVersion-SameMajorVersion.cmake.in
new file mode 100644
index 0000000..a32245d
--- /dev/null
+++ b/share/cmake-3.6/Modules/BasicConfigVersion-SameMajorVersion.cmake.in
@@ -0,0 +1,46 @@
+# This is a basic version file for the Config-mode of find_package().
+# It is used by write_basic_package_version_file() as input file for configure_file()
+# to create a version-file which can be installed along a config.cmake file.
+#
+# The created file sets PACKAGE_VERSION_EXACT if the current version string and
+# the requested version string are exactly the same and it sets
+# PACKAGE_VERSION_COMPATIBLE if the current version is >= requested version,
+# but only if the requested major version is the same as the current one.
+# The variable CVF_VERSION must be set before calling configure_file().
+
+
+set(PACKAGE_VERSION "@CVF_VERSION@")
+
+if(PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION)
+  set(PACKAGE_VERSION_COMPATIBLE FALSE)
+else()
+
+  if("@CVF_VERSION@" MATCHES "^([0-9]+)\\.")
+    set(CVF_VERSION_MAJOR "${CMAKE_MATCH_1}")
+  else()
+    set(CVF_VERSION_MAJOR "@CVF_VERSION@")
+  endif()
+
+  if(PACKAGE_FIND_VERSION_MAJOR STREQUAL CVF_VERSION_MAJOR)
+    set(PACKAGE_VERSION_COMPATIBLE TRUE)
+  else()
+    set(PACKAGE_VERSION_COMPATIBLE FALSE)
+  endif()
+
+  if(PACKAGE_FIND_VERSION STREQUAL PACKAGE_VERSION)
+      set(PACKAGE_VERSION_EXACT TRUE)
+  endif()
+endif()
+
+
+# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
+if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "@CMAKE_SIZEOF_VOID_P@" STREQUAL "")
+   return()
+endif()
+
+# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
+if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "@CMAKE_SIZEOF_VOID_P@")
+  math(EXPR installedBits "@CMAKE_SIZEOF_VOID_P@ * 8")
+  set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
+  set(PACKAGE_VERSION_UNSUITABLE TRUE)
+endif()
diff --git a/share/cmake-3.6/Modules/BundleUtilities.cmake b/share/cmake-3.6/Modules/BundleUtilities.cmake
new file mode 100644
index 0000000..cfb6450
--- /dev/null
+++ b/share/cmake-3.6/Modules/BundleUtilities.cmake
@@ -0,0 +1,1055 @@
+#.rst:
+# BundleUtilities
+# ---------------
+#
+# Functions to help assemble a standalone bundle application.
+#
+# A collection of CMake utility functions useful for dealing with .app
+# bundles on the Mac and bundle-like directories on any OS.
+#
+# The following functions are provided by this module:
+#
+# ::
+#
+#    fixup_bundle
+#    copy_and_fixup_bundle
+#    verify_app
+#    get_bundle_main_executable
+#    get_dotapp_dir
+#    get_bundle_and_executable
+#    get_bundle_all_executables
+#    get_item_key
+#    get_item_rpaths
+#    clear_bundle_keys
+#    set_bundle_key_values
+#    get_bundle_keys
+#    copy_resolved_item_into_bundle
+#    copy_resolved_framework_into_bundle
+#    fixup_bundle_item
+#    verify_bundle_prerequisites
+#    verify_bundle_symlinks
+#
+# Requires CMake 2.6 or greater because it uses function, break and
+# PARENT_SCOPE.  Also depends on GetPrerequisites.cmake.
+#
+# ::
+#
+#   FIXUP_BUNDLE(<app> <libs> <dirs>)
+#
+# Fix up a bundle in-place and make it standalone, such that it can be
+# drag-n-drop copied to another machine and run on that machine as long
+# as all of the system libraries are compatible.
+#
+# If you pass plugins to fixup_bundle as the libs parameter, you should
+# install them or copy them into the bundle before calling fixup_bundle.
+# The "libs" parameter is a list of libraries that must be fixed up, but
+# that cannot be determined by otool output analysis.  (i.e., plugins)
+#
+# Gather all the keys for all the executables and libraries in a bundle,
+# and then, for each key, copy each prerequisite into the bundle.  Then
+# fix each one up according to its own list of prerequisites.
+#
+# Then clear all the keys and call verify_app on the final bundle to
+# ensure that it is truly standalone.
+#
+# As an optional parameter (IGNORE_ITEM) a list of file names can be passed,
+# which are then ignored (e.g. IGNORE_ITEM "vcredist_x86.exe;vcredist_x64.exe")
+#
+# ::
+#
+#   COPY_AND_FIXUP_BUNDLE(<src> <dst> <libs> <dirs>)
+#
+# Makes a copy of the bundle <src> at location <dst> and then fixes up
+# the new copied bundle in-place at <dst>...
+#
+# ::
+#
+#   VERIFY_APP(<app>)
+#
+# Verifies that an application <app> appears valid based on running
+# analysis tools on it.  Calls "message(FATAL_ERROR" if the application
+# is not verified.
+#
+# As an optional parameter (IGNORE_ITEM) a list of file names can be passed,
+# which are then ignored (e.g. IGNORE_ITEM "vcredist_x86.exe;vcredist_x64.exe")
+#
+# ::
+#
+#   GET_BUNDLE_MAIN_EXECUTABLE(<bundle> <result_var>)
+#
+# The result will be the full path name of the bundle's main executable
+# file or an "error:" prefixed string if it could not be determined.
+#
+# ::
+#
+#   GET_DOTAPP_DIR(<exe> <dotapp_dir_var>)
+#
+# Returns the nearest parent dir whose name ends with ".app" given the
+# full path to an executable.  If there is no such parent dir, then
+# simply return the dir containing the executable.
+#
+# The returned directory may or may not exist.
+#
+# ::
+#
+#   GET_BUNDLE_AND_EXECUTABLE(<app> <bundle_var> <executable_var> <valid_var>)
+#
+# Takes either a ".app" directory name or the name of an executable
+# nested inside a ".app" directory and returns the path to the ".app"
+# directory in <bundle_var> and the path to its main executable in
+# <executable_var>
+#
+# ::
+#
+#   GET_BUNDLE_ALL_EXECUTABLES(<bundle> <exes_var>)
+#
+# Scans the given bundle recursively for all executable files and
+# accumulates them into a variable.
+#
+# ::
+#
+#   GET_ITEM_KEY(<item> <key_var>)
+#
+# Given a file (item) name, generate a key that should be unique
+# considering the set of libraries that need copying or fixing up to
+# make a bundle standalone.  This is essentially the file name including
+# extension with "." replaced by "_"
+#
+# This key is used as a prefix for CMake variables so that we can
+# associate a set of variables with a given item based on its key.
+#
+# ::
+#
+#   CLEAR_BUNDLE_KEYS(<keys_var>)
+#
+# Loop over the list of keys, clearing all the variables associated with
+# each key.  After the loop, clear the list of keys itself.
+#
+# Caller of get_bundle_keys should call clear_bundle_keys when done with
+# list of keys.
+#
+# ::
+#
+#   SET_BUNDLE_KEY_VALUES(<keys_var> <context> <item> <exepath> <dirs>
+#                         <copyflag> [<rpaths>])
+#
+# Add a key to the list (if necessary) for the given item.  If added,
+# also set all the variables associated with that key.
+#
+# ::
+#
+#   GET_BUNDLE_KEYS(<app> <libs> <dirs> <keys_var>)
+#
+# Loop over all the executable and library files within the bundle (and
+# given as extra <libs>) and accumulate a list of keys representing
+# them.  Set values associated with each key such that we can loop over
+# all of them and copy prerequisite libs into the bundle and then do
+# appropriate install_name_tool fixups.
+#
+# As an optional parameter (IGNORE_ITEM) a list of file names can be passed,
+# which are then ignored (e.g. IGNORE_ITEM "vcredist_x86.exe;vcredist_x64.exe")
+#
+# ::
+#
+#   COPY_RESOLVED_ITEM_INTO_BUNDLE(<resolved_item> <resolved_embedded_item>)
+#
+# Copy a resolved item into the bundle if necessary.  Copy is not
+# necessary if the resolved_item is "the same as" the
+# resolved_embedded_item.
+#
+# ::
+#
+#   COPY_RESOLVED_FRAMEWORK_INTO_BUNDLE(<resolved_item> <resolved_embedded_item>)
+#
+# Copy a resolved framework into the bundle if necessary.  Copy is not
+# necessary if the resolved_item is "the same as" the
+# resolved_embedded_item.
+#
+# By default, BU_COPY_FULL_FRAMEWORK_CONTENTS is not set.  If you want
+# full frameworks embedded in your bundles, set
+# BU_COPY_FULL_FRAMEWORK_CONTENTS to ON before calling fixup_bundle.  By
+# default, COPY_RESOLVED_FRAMEWORK_INTO_BUNDLE copies the framework
+# dylib itself plus the framework Resources directory.
+#
+# ::
+#
+#   FIXUP_BUNDLE_ITEM(<resolved_embedded_item> <exepath> <dirs>)
+#
+# Get the direct/non-system prerequisites of the resolved embedded item.
+# For each prerequisite, change the way it is referenced to the value of
+# the _EMBEDDED_ITEM keyed variable for that prerequisite.  (Most likely
+# changing to an "@executable_path" style reference.)
+#
+# This function requires that the resolved_embedded_item be "inside" the
+# bundle already.  In other words, if you pass plugins to fixup_bundle
+# as the libs parameter, you should install them or copy them into the
+# bundle before calling fixup_bundle.  The "libs" parameter is a list of
+# libraries that must be fixed up, but that cannot be determined by
+# otool output analysis.  (i.e., plugins)
+#
+# Also, change the id of the item being fixed up to its own
+# _EMBEDDED_ITEM value.
+#
+# Accumulate changes in a local variable and make *one* call to
+# install_name_tool at the end of the function with all the changes at
+# once.
+#
+# If the BU_CHMOD_BUNDLE_ITEMS variable is set then bundle items will be
+# marked writable before install_name_tool tries to change them.
+#
+# ::
+#
+#   VERIFY_BUNDLE_PREREQUISITES(<bundle> <result_var> <info_var>)
+#
+# Verifies that the sum of all prerequisites of all files inside the
+# bundle are contained within the bundle or are "system" libraries,
+# presumed to exist everywhere.
+#
+# As an optional parameter (IGNORE_ITEM) a list of file names can be passed,
+# which are then ignored (e.g. IGNORE_ITEM "vcredist_x86.exe;vcredist_x64.exe")
+#
+# ::
+#
+#   VERIFY_BUNDLE_SYMLINKS(<bundle> <result_var> <info_var>)
+#
+# Verifies that any symlinks found in the bundle point to other files
+# that are already also in the bundle...  Anything that points to an
+# external file causes this function to fail the verification.
+
+#=============================================================================
+# Copyright 2008-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# The functions defined in this file depend on the get_prerequisites function
+# (and possibly others) found in:
+#
+get_filename_component(BundleUtilities_cmake_dir "${CMAKE_CURRENT_LIST_FILE}" PATH)
+include("${BundleUtilities_cmake_dir}/GetPrerequisites.cmake")
+
+
+function(get_bundle_main_executable bundle result_var)
+  set(result "error: '${bundle}/Contents/Info.plist' file does not exist")
+
+  if(EXISTS "${bundle}/Contents/Info.plist")
+    set(result "error: no CFBundleExecutable in '${bundle}/Contents/Info.plist' file")
+    set(line_is_main_executable 0)
+    set(bundle_executable "")
+
+    # Read Info.plist as a list of lines:
+    #
+    set(eol_char "E")
+    file(READ "${bundle}/Contents/Info.plist" info_plist)
+    string(REPLACE ";" "\\;" info_plist "${info_plist}")
+    string(REPLACE "\n" "${eol_char};" info_plist "${info_plist}")
+    string(REPLACE "\r" "${eol_char};" info_plist "${info_plist}")
+
+    # Scan the lines for "<key>CFBundleExecutable</key>" - the line after that
+    # is the name of the main executable.
+    #
+    foreach(line ${info_plist})
+      if(line_is_main_executable)
+        string(REGEX REPLACE "^.*<string>(.*)</string>.*$" "\\1" bundle_executable "${line}")
+        break()
+      endif()
+
+      if(line MATCHES "<key>CFBundleExecutable</key>")
+        set(line_is_main_executable 1)
+      endif()
+    endforeach()
+
+    if(NOT "${bundle_executable}" STREQUAL "")
+      if(EXISTS "${bundle}/Contents/MacOS/${bundle_executable}")
+        set(result "${bundle}/Contents/MacOS/${bundle_executable}")
+      else()
+
+        # Ultimate goal:
+        # If not in "Contents/MacOS" then scan the bundle for matching files. If
+        # there is only one executable file that matches, then use it, otherwise
+        # it's an error...
+        #
+        #file(GLOB_RECURSE file_list "${bundle}/${bundle_executable}")
+
+        # But for now, pragmatically, it's an error. Expect the main executable
+        # for the bundle to be in Contents/MacOS, it's an error if it's not:
+        #
+        set(result "error: '${bundle}/Contents/MacOS/${bundle_executable}' does not exist")
+      endif()
+    endif()
+  else()
+    #
+    # More inclusive technique... (This one would work on Windows and Linux
+    # too, if a developer followed the typical Mac bundle naming convention...)
+    #
+    # If there is no Info.plist file, try to find an executable with the same
+    # base name as the .app directory:
+    #
+  endif()
+
+  set(${result_var} "${result}" PARENT_SCOPE)
+endfunction()
+
+
+function(get_dotapp_dir exe dotapp_dir_var)
+  set(s "${exe}")
+
+  if(s MATCHES "/.*\\.app/")
+    # If there is a ".app" parent directory,
+    # ascend until we hit it:
+    #   (typical of a Mac bundle executable)
+    #
+    set(done 0)
+    while(NOT ${done})
+      get_filename_component(snamewe "${s}" NAME_WE)
+      get_filename_component(sname "${s}" NAME)
+      get_filename_component(sdir "${s}" PATH)
+      set(s "${sdir}")
+      if(sname MATCHES "\\.app$")
+        set(done 1)
+        set(dotapp_dir "${sdir}/${sname}")
+      endif()
+    endwhile()
+  else()
+    # Otherwise use a directory containing the exe
+    #   (typical of a non-bundle executable on Mac, Windows or Linux)
+    #
+    is_file_executable("${s}" is_executable)
+    if(is_executable)
+      get_filename_component(sdir "${s}" PATH)
+      set(dotapp_dir "${sdir}")
+    else()
+      set(dotapp_dir "${s}")
+    endif()
+  endif()
+
+
+  set(${dotapp_dir_var} "${dotapp_dir}" PARENT_SCOPE)
+endfunction()
+
+
+function(get_bundle_and_executable app bundle_var executable_var valid_var)
+  set(valid 0)
+
+  if(EXISTS "${app}")
+    # Is it a directory ending in .app?
+    if(IS_DIRECTORY "${app}")
+      if(app MATCHES "\\.app$")
+        get_bundle_main_executable("${app}" executable)
+        if(EXISTS "${app}" AND EXISTS "${executable}")
+          set(${bundle_var} "${app}" PARENT_SCOPE)
+          set(${executable_var} "${executable}" PARENT_SCOPE)
+          set(valid 1)
+          #message(STATUS "info: handled .app directory case...")
+        else()
+          message(STATUS "warning: *NOT* handled - .app directory case...")
+        endif()
+      else()
+        message(STATUS "warning: *NOT* handled - directory but not .app case...")
+      endif()
+    else()
+      # Is it an executable file?
+      is_file_executable("${app}" is_executable)
+      if(is_executable)
+        get_dotapp_dir("${app}" dotapp_dir)
+        if(EXISTS "${dotapp_dir}")
+          set(${bundle_var} "${dotapp_dir}" PARENT_SCOPE)
+          set(${executable_var} "${app}" PARENT_SCOPE)
+          set(valid 1)
+          #message(STATUS "info: handled executable file in .app dir case...")
+        else()
+          get_filename_component(app_dir "${app}" PATH)
+          set(${bundle_var} "${app_dir}" PARENT_SCOPE)
+          set(${executable_var} "${app}" PARENT_SCOPE)
+          set(valid 1)
+          #message(STATUS "info: handled executable file in any dir case...")
+        endif()
+      else()
+        message(STATUS "warning: *NOT* handled - not .app dir, not executable file...")
+      endif()
+    endif()
+  else()
+    message(STATUS "warning: *NOT* handled - directory/file does not exist...")
+  endif()
+
+  if(NOT valid)
+    set(${bundle_var} "error: not a bundle" PARENT_SCOPE)
+    set(${executable_var} "error: not a bundle" PARENT_SCOPE)
+  endif()
+
+  set(${valid_var} ${valid} PARENT_SCOPE)
+endfunction()
+
+
+function(get_bundle_all_executables bundle exes_var)
+  set(exes "")
+
+  if(UNIX)
+    find_program(find_cmd "find")
+    mark_as_advanced(find_cmd)
+  endif()
+
+  # find command is much quicker than checking every file one by one on Unix
+  # which can take long time for large bundles, and since anyway we expect
+  # executable to have execute flag set we can narrow the list much quicker.
+  if(find_cmd)
+    execute_process(COMMAND "${find_cmd}" "${bundle}"
+      -type f \( -perm -0100 -o -perm -0010 -o -perm -0001 \)
+      OUTPUT_VARIABLE file_list
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      )
+    string(REPLACE "\n" ";" file_list "${file_list}")
+  else()
+    file(GLOB_RECURSE file_list "${bundle}/*")
+  endif()
+
+  foreach(f ${file_list})
+    is_file_executable("${f}" is_executable)
+    if(is_executable)
+      set(exes ${exes} "${f}")
+    endif()
+  endforeach()
+
+  set(${exes_var} "${exes}" PARENT_SCOPE)
+endfunction()
+
+
+function(get_item_rpaths item rpaths_var)
+  if(APPLE)
+    find_program(otool_cmd "otool")
+    mark_as_advanced(otool_cmd)
+  endif()
+
+  if(otool_cmd)
+    execute_process(
+      COMMAND "${otool_cmd}" -l "${item}"
+      OUTPUT_VARIABLE load_cmds_ov
+      )
+    string(REGEX REPLACE "[^\n]+cmd LC_RPATH\n[^\n]+\n[^\n]+path ([^\n]+) \\(offset[^\n]+\n" "rpath \\1\n" load_cmds_ov "${load_cmds_ov}")
+    string(REGEX MATCHALL "rpath [^\n]+" load_cmds_ov "${load_cmds_ov}")
+    string(REGEX REPLACE "rpath " "" load_cmds_ov "${load_cmds_ov}")
+    if(load_cmds_ov)
+      foreach(rpath ${load_cmds_ov})
+        gp_append_unique(${rpaths_var} "${rpath}")
+      endforeach()
+    endif()
+  endif()
+
+  set(${rpaths_var} ${${rpaths_var}} PARENT_SCOPE)
+endfunction()
+
+
+function(get_item_key item key_var)
+  get_filename_component(item_name "${item}" NAME)
+  if(WIN32)
+    string(TOLOWER "${item_name}" item_name)
+  endif()
+  string(REPLACE "." "_" ${key_var} "${item_name}")
+  set(${key_var} ${${key_var}} PARENT_SCOPE)
+endfunction()
+
+
+function(clear_bundle_keys keys_var)
+  foreach(key ${${keys_var}})
+    set(${key}_ITEM PARENT_SCOPE)
+    set(${key}_RESOLVED_ITEM PARENT_SCOPE)
+    set(${key}_DEFAULT_EMBEDDED_PATH PARENT_SCOPE)
+    set(${key}_EMBEDDED_ITEM PARENT_SCOPE)
+    set(${key}_RESOLVED_EMBEDDED_ITEM PARENT_SCOPE)
+    set(${key}_COPYFLAG PARENT_SCOPE)
+    set(${key}_RPATHS PARENT_SCOPE)
+  endforeach()
+  set(${keys_var} PARENT_SCOPE)
+endfunction()
+
+
+function(set_bundle_key_values keys_var context item exepath dirs copyflag)
+  if(ARGC GREATER 6)
+    set(rpaths "${ARGV6}")
+  else()
+    set(rpaths "")
+  endif()
+  get_filename_component(item_name "${item}" NAME)
+
+  get_item_key("${item}" key)
+
+  list(LENGTH ${keys_var} length_before)
+  gp_append_unique(${keys_var} "${key}")
+  list(LENGTH ${keys_var} length_after)
+
+  if(NOT length_before EQUAL length_after)
+    gp_resolve_item("${context}" "${item}" "${exepath}" "${dirs}" resolved_item "${rpaths}")
+
+    gp_item_default_embedded_path("${item}" default_embedded_path)
+
+    get_item_rpaths("${resolved_item}" item_rpaths)
+
+    if((NOT item MATCHES "\\.dylib$") AND (item MATCHES "[^/]+\\.framework/"))
+      # For frameworks, construct the name under the embedded path from the
+      # opening "${item_name}.framework/" to the closing "/${item_name}":
+      #
+      string(REGEX REPLACE "^.*(${item_name}.framework/.*/?${item_name}).*$" "${default_embedded_path}/\\1" embedded_item "${item}")
+    else()
+      # For other items, just use the same name as the original, but in the
+      # embedded path:
+      #
+      set(embedded_item "${default_embedded_path}/${item_name}")
+    endif()
+
+    # Replace @executable_path and resolve ".." references:
+    #
+    string(REPLACE "@executable_path" "${exepath}" resolved_embedded_item "${embedded_item}")
+    get_filename_component(resolved_embedded_item "${resolved_embedded_item}" ABSOLUTE)
+
+    # *But* -- if we are not copying, then force resolved_embedded_item to be
+    # the same as resolved_item. In the case of multiple executables in the
+    # original bundle, using the default_embedded_path results in looking for
+    # the resolved executable next to the main bundle executable. This is here
+    # so that exes in the other sibling directories (like "bin") get fixed up
+    # properly...
+    #
+    if(NOT copyflag)
+      set(resolved_embedded_item "${resolved_item}")
+    endif()
+
+    set(${keys_var} ${${keys_var}} PARENT_SCOPE)
+    set(${key}_ITEM "${item}" PARENT_SCOPE)
+    set(${key}_RESOLVED_ITEM "${resolved_item}" PARENT_SCOPE)
+    set(${key}_DEFAULT_EMBEDDED_PATH "${default_embedded_path}" PARENT_SCOPE)
+    set(${key}_EMBEDDED_ITEM "${embedded_item}" PARENT_SCOPE)
+    set(${key}_RESOLVED_EMBEDDED_ITEM "${resolved_embedded_item}" PARENT_SCOPE)
+    set(${key}_COPYFLAG "${copyflag}" PARENT_SCOPE)
+    set(${key}_RPATHS "${item_rpaths}" PARENT_SCOPE)
+    set(${key}_RDEP_RPATHS "${rpaths}" PARENT_SCOPE)
+  else()
+    #message("warning: item key '${key}' already in the list, subsequent references assumed identical to first")
+  endif()
+endfunction()
+
+
+function(get_bundle_keys app libs dirs keys_var)
+  set(${keys_var} PARENT_SCOPE)
+
+  set(options)
+  set(oneValueArgs)
+  set(multiValueArgs IGNORE_ITEM)
+  cmake_parse_arguments(CFG "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN} )
+
+  get_bundle_and_executable("${app}" bundle executable valid)
+  if(valid)
+    # Always use the exepath of the main bundle executable for @executable_path
+    # replacements:
+    #
+    get_filename_component(exepath "${executable}" PATH)
+
+    # But do fixups on all executables in the bundle:
+    #
+    get_bundle_all_executables("${bundle}" exes)
+
+    # Set keys for main executable first:
+    #
+    set_bundle_key_values(${keys_var} "${executable}" "${executable}" "${exepath}" "${dirs}" 0)
+
+    # Get rpaths specified by main executable:
+    #
+    get_item_key("${executable}" executable_key)
+    set(main_rpaths "${${executable_key}_RPATHS}")
+
+    # For each extra lib, accumulate a key as well and then also accumulate
+    # any of its prerequisites. (Extra libs are typically dynamically loaded
+    # plugins: libraries that are prerequisites for full runtime functionality
+    # but that do not show up in otool -L output...)
+    #
+    foreach(lib ${libs})
+      set_bundle_key_values(${keys_var} "${lib}" "${lib}" "${exepath}" "${dirs}" 0 "${main_rpaths}")
+
+      set(prereqs "")
+      set(ignoreFile FALSE)
+      get_filename_component(prereq_filename ${lib} NAME)
+      if(NOT "${CFG_IGNORE_ITEM}" STREQUAL "" )
+        foreach(item ${CFG_IGNORE_ITEM})
+            if("${item}" STREQUAL "${prereq_filename}")
+              set(ignoreFile TRUE)
+            endif()
+        endforeach()
+      endif()
+
+      if(NOT ignoreFile)
+        get_prerequisites("${lib}" prereqs 1 1 "${exepath}" "${dirs}" "${main_rpaths}")
+        foreach(pr ${prereqs})
+          set_bundle_key_values(${keys_var} "${lib}" "${pr}" "${exepath}" "${dirs}" 1 "${main_rpaths}")
+        endforeach()
+      else()
+        message(STATUS "Ignoring file: ${prereq_filename}")
+      endif()
+    endforeach()
+
+    # For each executable found in the bundle, accumulate keys as we go.
+    # The list of keys should be complete when all prerequisites of all
+    # binaries in the bundle have been analyzed.
+    #
+    foreach(exe ${exes})
+      # Main executable is scanned first above:
+      #
+      if(NOT "${exe}" STREQUAL "${executable}")
+        # Add the exe itself to the keys:
+        #
+        set_bundle_key_values(${keys_var} "${exe}" "${exe}" "${exepath}" "${dirs}" 0 "${main_rpaths}")
+
+        # Get rpaths specified by executable:
+        #
+        get_item_key("${exe}" exe_key)
+        set(exe_rpaths "${main_rpaths}" "${${exe_key}_RPATHS}")
+      else()
+        set(exe_rpaths "${main_rpaths}")
+      endif()
+
+      # Add each prerequisite to the keys:
+      #
+      set(prereqs "")
+      set(ignoreFile FALSE)
+      get_filename_component(prereq_filename ${exe} NAME)
+      if(NOT "${CFG_IGNORE_ITEM}" STREQUAL "" )
+        foreach(item ${CFG_IGNORE_ITEM})
+            if("${item}" STREQUAL "${prereq_filename}")
+              set(ignoreFile TRUE)
+            endif()
+        endforeach()
+      endif()
+
+      if(NOT ignoreFile)
+        get_prerequisites("${exe}" prereqs 1 1 "${exepath}" "${dirs}" "${exe_rpaths}")
+        foreach(pr ${prereqs})
+          set_bundle_key_values(${keys_var} "${exe}" "${pr}" "${exepath}" "${dirs}" 1 "${exe_rpaths}")
+        endforeach()
+      else()
+        message(STATUS "Ignoring file: ${prereq_filename}")
+      endif()
+    endforeach()
+
+    # Propagate values to caller's scope:
+    #
+    set(${keys_var} ${${keys_var}} PARENT_SCOPE)
+    foreach(key ${${keys_var}})
+      set(${key}_ITEM "${${key}_ITEM}" PARENT_SCOPE)
+      set(${key}_RESOLVED_ITEM "${${key}_RESOLVED_ITEM}" PARENT_SCOPE)
+      set(${key}_DEFAULT_EMBEDDED_PATH "${${key}_DEFAULT_EMBEDDED_PATH}" PARENT_SCOPE)
+      set(${key}_EMBEDDED_ITEM "${${key}_EMBEDDED_ITEM}" PARENT_SCOPE)
+      set(${key}_RESOLVED_EMBEDDED_ITEM "${${key}_RESOLVED_EMBEDDED_ITEM}" PARENT_SCOPE)
+      set(${key}_COPYFLAG "${${key}_COPYFLAG}" PARENT_SCOPE)
+      set(${key}_RPATHS "${${key}_RPATHS}" PARENT_SCOPE)
+      set(${key}_RDEP_RPATHS "${${key}_RDEP_RPATHS}" PARENT_SCOPE)
+    endforeach()
+  endif()
+endfunction()
+
+
+function(copy_resolved_item_into_bundle resolved_item resolved_embedded_item)
+  if(WIN32)
+    # ignore case on Windows
+    string(TOLOWER "${resolved_item}" resolved_item_compare)
+    string(TOLOWER "${resolved_embedded_item}" resolved_embedded_item_compare)
+  else()
+    set(resolved_item_compare "${resolved_item}")
+    set(resolved_embedded_item_compare "${resolved_embedded_item}")
+  endif()
+
+  if("${resolved_item_compare}" STREQUAL "${resolved_embedded_item_compare}")
+    message(STATUS "warning: resolved_item == resolved_embedded_item - not copying...")
+  else()
+    #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy ${resolved_item} ${resolved_embedded_item}")
+    execute_process(COMMAND ${CMAKE_COMMAND} -E copy "${resolved_item}" "${resolved_embedded_item}")
+    if(UNIX AND NOT APPLE)
+      file(RPATH_REMOVE FILE "${resolved_embedded_item}")
+    endif()
+  endif()
+
+endfunction()
+
+
+function(copy_resolved_framework_into_bundle resolved_item resolved_embedded_item)
+  if(WIN32)
+    # ignore case on Windows
+    string(TOLOWER "${resolved_item}" resolved_item_compare)
+    string(TOLOWER "${resolved_embedded_item}" resolved_embedded_item_compare)
+  else()
+    set(resolved_item_compare "${resolved_item}")
+    set(resolved_embedded_item_compare "${resolved_embedded_item}")
+  endif()
+
+  if("${resolved_item_compare}" STREQUAL "${resolved_embedded_item_compare}")
+    message(STATUS "warning: resolved_item == resolved_embedded_item - not copying...")
+  else()
+    if(BU_COPY_FULL_FRAMEWORK_CONTENTS)
+      # Full Framework (everything):
+      get_filename_component(resolved_dir "${resolved_item}" PATH)
+      get_filename_component(resolved_dir "${resolved_dir}/../.." ABSOLUTE)
+      get_filename_component(resolved_embedded_dir "${resolved_embedded_item}" PATH)
+      get_filename_component(resolved_embedded_dir "${resolved_embedded_dir}/../.." ABSOLUTE)
+      #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy_directory '${resolved_dir}' '${resolved_embedded_dir}'")
+      execute_process(COMMAND ${CMAKE_COMMAND} -E copy_directory "${resolved_dir}" "${resolved_embedded_dir}")
+    else()
+      # Framework lib itself:
+      #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy ${resolved_item} ${resolved_embedded_item}")
+      execute_process(COMMAND ${CMAKE_COMMAND} -E copy "${resolved_item}" "${resolved_embedded_item}")
+
+      # Plus Resources, if they exist:
+      string(REGEX REPLACE "^(.*)/[^/]+$" "\\1/Resources" resolved_resources "${resolved_item}")
+      string(REGEX REPLACE "^(.*)/[^/]+$" "\\1/Resources" resolved_embedded_resources "${resolved_embedded_item}")
+      if(EXISTS "${resolved_resources}")
+        #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy_directory '${resolved_resources}' '${resolved_embedded_resources}'")
+        execute_process(COMMAND ${CMAKE_COMMAND} -E copy_directory "${resolved_resources}" "${resolved_embedded_resources}")
+      endif()
+
+      # Some frameworks e.g. Qt put Info.plist in wrong place, so when it is
+      # missing in resources, copy it from other well known incorrect locations:
+      if(NOT EXISTS "${resolved_resources}/Info.plist")
+        # Check for Contents/Info.plist in framework root (older Qt SDK):
+        string(REGEX REPLACE "^(.*)/[^/]+/[^/]+/[^/]+$" "\\1/Contents/Info.plist" resolved_info_plist "${resolved_item}")
+        string(REGEX REPLACE "^(.*)/[^/]+$" "\\1/Resources/Info.plist" resolved_embedded_info_plist "${resolved_embedded_item}")
+        if(EXISTS "${resolved_info_plist}")
+          #message(STATUS "copying COMMAND ${CMAKE_COMMAND} -E copy_directory '${resolved_info_plist}' '${resolved_embedded_info_plist}'")
+          execute_process(COMMAND ${CMAKE_COMMAND} -E copy "${resolved_info_plist}" "${resolved_embedded_info_plist}")
+        endif()
+      endif()
+
+      # Check if framework is versioned and fix it layout
+      string(REGEX REPLACE "^.*/([^/]+)/[^/]+$" "\\1" resolved_embedded_version "${resolved_embedded_item}")
+      string(REGEX REPLACE "^(.*)/[^/]+/[^/]+$" "\\1" resolved_embedded_versions "${resolved_embedded_item}")
+      string(REGEX REPLACE "^.*/([^/]+)/[^/]+/[^/]+$" "\\1" resolved_embedded_versions_basename "${resolved_embedded_item}")
+      if(resolved_embedded_versions_basename STREQUAL "Versions")
+        # Ensure Current symlink points to the framework version
+        if(NOT EXISTS "${resolved_embedded_versions}/Current")
+          execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "${resolved_embedded_version}" "${resolved_embedded_versions}/Current")
+        endif()
+        # Restore symlinks in framework root pointing to current framework
+        # binary and resources:
+        string(REGEX REPLACE "^(.*)/[^/]+/[^/]+/[^/]+$" "\\1" resolved_embedded_root "${resolved_embedded_item}")
+        string(REGEX REPLACE "^.*/([^/]+)$" "\\1" resolved_embedded_item_basename "${resolved_embedded_item}")
+        if(NOT EXISTS "${resolved_embedded_root}/${resolved_embedded_item_basename}")
+          execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "Versions/Current/${resolved_embedded_item_basename}" "${resolved_embedded_root}/${resolved_embedded_item_basename}")
+        endif()
+        if(NOT EXISTS "${resolved_embedded_root}/Resources")
+          execute_process(COMMAND ${CMAKE_COMMAND} -E create_symlink "Versions/Current/Resources" "${resolved_embedded_root}/Resources")
+        endif()
+      endif()
+    endif()
+    if(UNIX AND NOT APPLE)
+      file(RPATH_REMOVE FILE "${resolved_embedded_item}")
+    endif()
+  endif()
+
+endfunction()
+
+
+function(fixup_bundle_item resolved_embedded_item exepath dirs)
+  # This item's key is "ikey":
+  #
+  get_item_key("${resolved_embedded_item}" ikey)
+
+  # Ensure the item is "inside the .app bundle" -- it should not be fixed up if
+  # it is not in the .app bundle... Otherwise, we'll modify files in the build
+  # tree, or in other varied locations around the file system, with our call to
+  # install_name_tool. Make sure that doesn't happen here:
+  #
+  get_dotapp_dir("${exepath}" exe_dotapp_dir)
+  string(LENGTH "${exe_dotapp_dir}/" exe_dotapp_dir_length)
+  string(LENGTH "${resolved_embedded_item}" resolved_embedded_item_length)
+  set(path_too_short 0)
+  set(is_embedded 0)
+  if(${resolved_embedded_item_length} LESS ${exe_dotapp_dir_length})
+    set(path_too_short 1)
+  endif()
+  if(NOT path_too_short)
+    string(SUBSTRING "${resolved_embedded_item}" 0 ${exe_dotapp_dir_length} item_substring)
+    if("${exe_dotapp_dir}/" STREQUAL "${item_substring}")
+      set(is_embedded 1)
+    endif()
+  endif()
+  if(NOT is_embedded)
+    message("  exe_dotapp_dir/='${exe_dotapp_dir}/'")
+    message("  item_substring='${item_substring}'")
+    message("  resolved_embedded_item='${resolved_embedded_item}'")
+    message("")
+    message("Install or copy the item into the bundle before calling fixup_bundle.")
+    message("Or maybe there's a typo or incorrect path in one of the args to fixup_bundle?")
+    message("")
+    message(FATAL_ERROR "cannot fixup an item that is not in the bundle...")
+  endif()
+
+  set(rpaths "${${ikey}_RPATHS}" "${${ikey}_RDEP_RPATHS}")
+
+  set(prereqs "")
+  get_prerequisites("${resolved_embedded_item}" prereqs 1 0 "${exepath}" "${dirs}" "${rpaths}")
+
+  set(changes "")
+
+  foreach(pr ${prereqs})
+    # Each referenced item's key is "rkey" in the loop:
+    #
+    get_item_key("${pr}" rkey)
+
+    if(NOT "${${rkey}_EMBEDDED_ITEM}" STREQUAL "")
+      set(changes ${changes} "-change" "${pr}" "${${rkey}_EMBEDDED_ITEM}")
+    else()
+      message("warning: unexpected reference to '${pr}'")
+    endif()
+  endforeach()
+
+  if(BU_CHMOD_BUNDLE_ITEMS)
+    execute_process(COMMAND chmod u+w "${resolved_embedded_item}")
+  endif()
+
+  # Only if install_name_tool supports -delete_rpath:
+  #
+  execute_process(COMMAND install_name_tool
+    OUTPUT_VARIABLE install_name_tool_usage
+    ERROR_VARIABLE  install_name_tool_usage
+    )
+  if(install_name_tool_usage MATCHES ".*-delete_rpath.*")
+    foreach(rpath ${${ikey}_RPATHS})
+      set(changes ${changes} -delete_rpath "${rpath}")
+    endforeach()
+  endif()
+
+  if(${ikey}_EMBEDDED_ITEM)
+    set(changes ${changes} -id "${${ikey}_EMBEDDED_ITEM}")
+  endif()
+
+  # Change this item's id and all of its references in one call
+  # to install_name_tool:
+  #
+  if(changes)
+    set(cmd install_name_tool ${changes} "${resolved_embedded_item}")
+    execute_process(COMMAND ${cmd} RESULT_VARIABLE install_name_tool_result)
+    if(NOT install_name_tool_result EQUAL 0)
+      string(REPLACE ";" "' '" msg "'${cmd}'")
+      message(FATAL_ERROR "Command failed:\n ${msg}")
+    endif()
+  endif()
+endfunction()
+
+
+function(fixup_bundle app libs dirs)
+  message(STATUS "fixup_bundle")
+  message(STATUS "  app='${app}'")
+  message(STATUS "  libs='${libs}'")
+  message(STATUS "  dirs='${dirs}'")
+
+  set(options)
+  set(oneValueArgs)
+  set(multiValueArgs IGNORE_ITEM)
+  cmake_parse_arguments(CFG "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN} )
+
+  message(STATUS "  ignoreItems='${CFG_IGNORE_ITEM}'")
+
+  get_bundle_and_executable("${app}" bundle executable valid)
+  if(valid)
+    get_filename_component(exepath "${executable}" PATH)
+
+    message(STATUS "fixup_bundle: preparing...")
+    get_bundle_keys("${app}" "${libs}" "${dirs}" keys IGNORE_ITEM "${CFG_IGNORE_ITEM}")
+
+    message(STATUS "fixup_bundle: copying...")
+    list(LENGTH keys n)
+    math(EXPR n ${n}*2)
+
+    set(i 0)
+    foreach(key ${keys})
+      math(EXPR i ${i}+1)
+      if(${${key}_COPYFLAG})
+        message(STATUS "${i}/${n}: copying '${${key}_RESOLVED_ITEM}'")
+      else()
+        message(STATUS "${i}/${n}: *NOT* copying '${${key}_RESOLVED_ITEM}'")
+      endif()
+
+      set(show_status 0)
+      if(show_status)
+        message(STATUS "key='${key}'")
+        message(STATUS "item='${${key}_ITEM}'")
+        message(STATUS "resolved_item='${${key}_RESOLVED_ITEM}'")
+        message(STATUS "default_embedded_path='${${key}_DEFAULT_EMBEDDED_PATH}'")
+        message(STATUS "embedded_item='${${key}_EMBEDDED_ITEM}'")
+        message(STATUS "resolved_embedded_item='${${key}_RESOLVED_EMBEDDED_ITEM}'")
+        message(STATUS "copyflag='${${key}_COPYFLAG}'")
+        message(STATUS "")
+      endif()
+
+      if(${${key}_COPYFLAG})
+        set(item "${${key}_ITEM}")
+        if(item MATCHES "[^/]+\\.framework/")
+          copy_resolved_framework_into_bundle("${${key}_RESOLVED_ITEM}"
+            "${${key}_RESOLVED_EMBEDDED_ITEM}")
+        else()
+          copy_resolved_item_into_bundle("${${key}_RESOLVED_ITEM}"
+            "${${key}_RESOLVED_EMBEDDED_ITEM}")
+        endif()
+      endif()
+    endforeach()
+
+    message(STATUS "fixup_bundle: fixing...")
+    foreach(key ${keys})
+      math(EXPR i ${i}+1)
+      if(APPLE)
+        message(STATUS "${i}/${n}: fixing up '${${key}_RESOLVED_EMBEDDED_ITEM}'")
+        fixup_bundle_item("${${key}_RESOLVED_EMBEDDED_ITEM}" "${exepath}" "${dirs}")
+      else()
+        message(STATUS "${i}/${n}: fix-up not required on this platform '${${key}_RESOLVED_EMBEDDED_ITEM}'")
+      endif()
+    endforeach()
+
+    message(STATUS "fixup_bundle: cleaning up...")
+    clear_bundle_keys(keys)
+
+    message(STATUS "fixup_bundle: verifying...")
+    verify_app("${app}" IGNORE_ITEM "${CFG_IGNORE_ITEM}")
+  else()
+    message(SEND_ERROR "error: fixup_bundle: not a valid bundle")
+  endif()
+
+  message(STATUS "fixup_bundle: done")
+endfunction()
+
+
+function(copy_and_fixup_bundle src dst libs dirs)
+  execute_process(COMMAND ${CMAKE_COMMAND} -E copy_directory "${src}" "${dst}")
+  fixup_bundle("${dst}" "${libs}" "${dirs}")
+endfunction()
+
+
+function(verify_bundle_prerequisites bundle result_var info_var)
+  set(result 1)
+  set(info "")
+  set(count 0)
+
+  set(options)
+  set(oneValueArgs)
+  set(multiValueArgs IGNORE_ITEM)
+  cmake_parse_arguments(CFG "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN} )
+
+  get_bundle_main_executable("${bundle}" main_bundle_exe)
+
+  get_bundle_all_executables("${bundle}" file_list)
+  foreach(f ${file_list})
+      get_filename_component(exepath "${f}" PATH)
+      math(EXPR count "${count} + 1")
+
+      message(STATUS "executable file ${count}: ${f}")
+
+      set(prereqs "")
+      set(ignoreFile FALSE)
+      get_filename_component(prereq_filename ${f} NAME)
+
+      if(NOT "${CFG_IGNORE_ITEM}" STREQUAL "" )
+        foreach(item ${CFG_IGNORE_ITEM})
+            if("${item}" STREQUAL "${prereq_filename}")
+              set(ignoreFile TRUE)
+            endif()
+        endforeach()
+      endif()
+
+      if(NOT ignoreFile)
+        get_prerequisites("${f}" prereqs 1 1 "${exepath}" "")
+
+        # On the Mac,
+        # "embedded" and "system" prerequisites are fine... anything else means
+        # the bundle's prerequisites are not verified (i.e., the bundle is not
+        # really "standalone")
+        #
+        # On Windows (and others? Linux/Unix/...?)
+        # "local" and "system" prereqs are fine...
+        #
+
+        set(external_prereqs "")
+
+        foreach(p ${prereqs})
+          set(p_type "")
+          gp_file_type("${f}" "${p}" p_type)
+
+          if(APPLE)
+            if(NOT "${p_type}" STREQUAL "embedded" AND NOT "${p_type}" STREQUAL "system")
+              set(external_prereqs ${external_prereqs} "${p}")
+            endif()
+          else()
+            if(NOT "${p_type}" STREQUAL "local" AND NOT "${p_type}" STREQUAL "system")
+              set(external_prereqs ${external_prereqs} "${p}")
+            endif()
+          endif()
+        endforeach()
+
+        if(external_prereqs)
+          # Found non-system/somehow-unacceptable prerequisites:
+          set(result 0)
+          set(info ${info} "external prerequisites found:\nf='${f}'\nexternal_prereqs='${external_prereqs}'\n")
+        endif()
+      else()
+        message(STATUS "Ignoring file: ${prereq_filename}")
+      endif()
+  endforeach()
+
+  if(result)
+    set(info "Verified ${count} executable files in '${bundle}'")
+  endif()
+
+  set(${result_var} "${result}" PARENT_SCOPE)
+  set(${info_var} "${info}" PARENT_SCOPE)
+endfunction()
+
+
+function(verify_bundle_symlinks bundle result_var info_var)
+  set(result 1)
+  set(info "")
+  set(count 0)
+
+  # TODO: implement this function for real...
+  # Right now, it is just a stub that verifies unconditionally...
+
+  set(${result_var} "${result}" PARENT_SCOPE)
+  set(${info_var} "${info}" PARENT_SCOPE)
+endfunction()
+
+
+function(verify_app app)
+  set(verified 0)
+  set(info "")
+
+  set(options)
+  set(oneValueArgs)
+  set(multiValueArgs IGNORE_ITEM)
+  cmake_parse_arguments(CFG "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN} )
+
+  get_bundle_and_executable("${app}" bundle executable valid)
+
+  message(STATUS "===========================================================================")
+  message(STATUS "Analyzing app='${app}'")
+  message(STATUS "bundle='${bundle}'")
+  message(STATUS "executable='${executable}'")
+  message(STATUS "valid='${valid}'")
+
+  # Verify that the bundle does not have any "external" prerequisites:
+  #
+  verify_bundle_prerequisites("${bundle}" verified info IGNORE_ITEM "${CFG_IGNORE_ITEM}")
+  message(STATUS "verified='${verified}'")
+  message(STATUS "info='${info}'")
+  message(STATUS "")
+
+  if(verified)
+    # Verify that the bundle does not have any symlinks to external files:
+    #
+    verify_bundle_symlinks("${bundle}" verified info)
+    message(STATUS "verified='${verified}'")
+    message(STATUS "info='${info}'")
+    message(STATUS "")
+  endif()
+
+  if(NOT verified)
+    message(FATAL_ERROR "error: verify_app failed")
+  endif()
+endfunction()
diff --git a/share/cmake-3.2/Modules/CMake.cmake b/share/cmake-3.6/Modules/CMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMake.cmake
rename to share/cmake-3.6/Modules/CMake.cmake
diff --git a/share/cmake-3.6/Modules/CMakeASM-ATTInformation.cmake b/share/cmake-3.6/Modules/CMakeASM-ATTInformation.cmake
new file mode 100644
index 0000000..07a2d38
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeASM-ATTInformation.cmake
@@ -0,0 +1,25 @@
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# support for AT&T syntax assemblers, e.g. GNU as
+
+set(ASM_DIALECT "-ATT")
+# *.S files are supposed to be preprocessed, so they should not be passed to
+# assembler but should be processed by gcc
+set(CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS s;asm)
+
+set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <INCLUDES> <FLAGS> -o <OBJECT> <SOURCE>")
+
+include(CMakeASMInformation)
+set(ASM_DIALECT)
diff --git a/share/cmake-3.2/Modules/CMakeASMCompiler.cmake.in b/share/cmake-3.6/Modules/CMakeASMCompiler.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeASMCompiler.cmake.in
rename to share/cmake-3.6/Modules/CMakeASMCompiler.cmake.in
diff --git a/share/cmake-3.6/Modules/CMakeASMInformation.cmake b/share/cmake-3.6/Modules/CMakeASMInformation.cmake
new file mode 100644
index 0000000..0e547c4
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeASMInformation.cmake
@@ -0,0 +1,148 @@
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(UNIX)
+  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .o)
+else()
+  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .obj)
+endif()
+
+set(CMAKE_INCLUDE_FLAG_ASM${ASM_DIALECT} "-I")       # -I
+set(CMAKE_BASE_NAME)
+get_filename_component(CMAKE_BASE_NAME "${CMAKE_ASM${ASM_DIALECT}_COMPILER}" NAME_WE)
+
+if("${CMAKE_BASE_NAME}" STREQUAL "as")
+  set(CMAKE_BASE_NAME gas)
+endif()
+
+# Load compiler-specific information.
+set(_INCLUDED_FILE "")
+if(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
+  include(Compiler/${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT} OPTIONAL  RESULT_VARIABLE _INCLUDED_FILE)
+endif()
+if(NOT _INCLUDED_FILE)
+  if("ASM${ASM_DIALECT}" STREQUAL "ASM")
+    message(STATUS "Warning: Did not find file Compiler/${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT}")
+  endif()
+  include(Platform/${CMAKE_BASE_NAME} OPTIONAL)
+endif()
+
+if(CMAKE_SYSTEM_PROCESSOR)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL  RESULT_VARIABLE _INCLUDED_FILE)
+  if(NOT _INCLUDED_FILE)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL)
+  endif()
+endif()
+
+include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}-ASM${ASM_DIALECT} OPTIONAL  RESULT_VARIABLE _INCLUDED_FILE)
+if(NOT _INCLUDED_FILE)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL)
+endif()
+
+# This should be included before the _INIT variables are
+# used to initialize the cache.  Since the rule variables
+# have if blocks on them, users can still define them here.
+# But, it should still be after the platform file so changes can
+# be made to those values.
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
+endif()
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE_ASM)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_ASM} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE_ASM "${_override}")
+endif()
+
+# Set default assembler file extensions:
+if(NOT CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS)
+  set(CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS s;S;asm)
+endif()
+
+
+# Support for CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT and friends:
+set(CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT "$ENV{ASM${ASM_DIALECT}FLAGS} ${CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT}")
+# avoid just having a space as the initial value for the cache
+if(CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT STREQUAL " ")
+  set(CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT)
+endif()
+set (CMAKE_ASM${ASM_DIALECT}_FLAGS "${CMAKE_ASM${ASM_DIALECT}_FLAGS_INIT}" CACHE STRING
+     "Flags used by the assembler during all build types.")
+
+if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
+# default build type is none
+  if(NOT CMAKE_NO_BUILD_TYPE)
+    set (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING
+      "Choose the type of build, options are: None, Debug Release RelWithDebInfo MinSizeRel.")
+  endif()
+  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_DEBUG "${CMAKE_ASM${ASM_DIALECT}_FLAGS_DEBUG_INIT}" CACHE STRING
+    "Flags used by the assembler during debug builds.")
+  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_MINSIZEREL "${CMAKE_ASM${ASM_DIALECT}_FLAGS_MINSIZEREL_INIT}" CACHE STRING
+    "Flags used by the assembler during release minsize builds.")
+  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_RELEASE "${CMAKE_ASM${ASM_DIALECT}_FLAGS_RELEASE_INIT}" CACHE STRING
+    "Flags used by the assembler during release builds.")
+  set (CMAKE_ASM${ASM_DIALECT}_FLAGS_RELWITHDEBINFO "${CMAKE_ASM${ASM_DIALECT}_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
+    "Flags used by the assembler during Release with Debug Info builds.")
+endif()
+
+mark_as_advanced(CMAKE_ASM${ASM_DIALECT}_FLAGS
+                 CMAKE_ASM${ASM_DIALECT}_FLAGS_DEBUG
+                 CMAKE_ASM${ASM_DIALECT}_FLAGS_MINSIZEREL
+                 CMAKE_ASM${ASM_DIALECT}_FLAGS_RELEASE
+                 CMAKE_ASM${ASM_DIALECT}_FLAGS_RELWITHDEBINFO
+                )
+
+
+if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT)
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
+endif()
+
+if(NOT CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY)
+  set(CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY
+      "<CMAKE_AR> cr <TARGET> <LINK_FLAGS> <OBJECTS> "
+      "<CMAKE_RANLIB> <TARGET> ")
+endif()
+
+if(NOT CMAKE_ASM${ASM_DIALECT}_LINK_EXECUTABLE)
+  set(CMAKE_ASM${ASM_DIALECT}_LINK_EXECUTABLE
+    "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <FLAGS> <CMAKE_ASM${ASM_DIALECT}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG)
+  set(CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_ASM${ASM_DIALECT}_FLAG})
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG_SEP)
+  set(CMAKE_EXECUTABLE_RUNTIME_ASM${ASM_DIALECT}_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_ASM${ASM_DIALECT}_FLAG_SEP})
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RPATH_LINK_ASM${ASM_DIALECT}_FLAG)
+  set(CMAKE_EXECUTABLE_RPATH_LINK_ASM${ASM_DIALECT}_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_ASM${ASM_DIALECT}_FLAG})
+endif()
+
+# to be done
+if(NOT CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_LIBRARY)
+  set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_LIBRARY)
+endif()
+
+if(NOT CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_MODULE)
+  set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_MODULE)
+endif()
+
+
+set(CMAKE_ASM${ASM_DIALECT}_INFOMATION_LOADED 1)
+
diff --git a/share/cmake-3.6/Modules/CMakeASM_MASMInformation.cmake b/share/cmake-3.6/Modules/CMakeASM_MASMInformation.cmake
new file mode 100644
index 0000000..bd76b98
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeASM_MASMInformation.cmake
@@ -0,0 +1,24 @@
+
+#=============================================================================
+# Copyright 2008-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# support for the MS assembler, masm and masm64
+
+set(ASM_DIALECT "_MASM")
+
+set(CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS asm)
+
+set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> /c  /Fo <OBJECT> <SOURCE>")
+
+include(CMakeASMInformation)
+set(ASM_DIALECT)
diff --git a/share/cmake-3.6/Modules/CMakeASM_NASMInformation.cmake b/share/cmake-3.6/Modules/CMakeASM_NASMInformation.cmake
new file mode 100644
index 0000000..146f412
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeASM_NASMInformation.cmake
@@ -0,0 +1,46 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# support for the nasm assembler
+
+set(CMAKE_ASM_NASM_SOURCE_FILE_EXTENSIONS nasm asm)
+
+if(NOT CMAKE_ASM_NASM_OBJECT_FORMAT)
+  if(WIN32)
+    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
+      set(CMAKE_ASM_NASM_OBJECT_FORMAT win64)
+    else()
+      set(CMAKE_ASM_NASM_OBJECT_FORMAT win32)
+    endif()
+  elseif(APPLE)
+    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
+      set(CMAKE_ASM_NASM_OBJECT_FORMAT macho64)
+    else()
+      set(CMAKE_ASM_NASM_OBJECT_FORMAT macho)
+    endif()
+  else()
+    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
+      set(CMAKE_ASM_NASM_OBJECT_FORMAT elf64)
+    else()
+      set(CMAKE_ASM_NASM_OBJECT_FORMAT elf)
+    endif()
+  endif()
+endif()
+
+set(CMAKE_ASM_NASM_COMPILE_OBJECT "<CMAKE_ASM_NASM_COMPILER> <INCLUDES> <FLAGS> -f ${CMAKE_ASM_NASM_OBJECT_FORMAT} -o <OBJECT> <SOURCE>")
+
+# Load the generic ASMInformation file:
+set(ASM_DIALECT "_NASM")
+include(CMakeASMInformation)
+set(ASM_DIALECT)
diff --git a/share/cmake-3.2/Modules/CMakeAddFortranSubdirectory.cmake b/share/cmake-3.6/Modules/CMakeAddFortranSubdirectory.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeAddFortranSubdirectory.cmake
rename to share/cmake-3.6/Modules/CMakeAddFortranSubdirectory.cmake
diff --git a/share/cmake-3.2/Modules/CMakeAddFortranSubdirectory/build_mingw.cmake.in b/share/cmake-3.6/Modules/CMakeAddFortranSubdirectory/build_mingw.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeAddFortranSubdirectory/build_mingw.cmake.in
rename to share/cmake-3.6/Modules/CMakeAddFortranSubdirectory/build_mingw.cmake.in
diff --git a/share/cmake-3.2/Modules/CMakeAddFortranSubdirectory/config_mingw.cmake.in b/share/cmake-3.6/Modules/CMakeAddFortranSubdirectory/config_mingw.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeAddFortranSubdirectory/config_mingw.cmake.in
rename to share/cmake-3.6/Modules/CMakeAddFortranSubdirectory/config_mingw.cmake.in
diff --git a/share/cmake-3.2/Modules/CMakeAddNewLanguage.txt b/share/cmake-3.6/Modules/CMakeAddNewLanguage.txt
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeAddNewLanguage.txt
rename to share/cmake-3.6/Modules/CMakeAddNewLanguage.txt
diff --git a/share/cmake-3.6/Modules/CMakeBackwardCompatibilityC.cmake b/share/cmake-3.6/Modules/CMakeBackwardCompatibilityC.cmake
new file mode 100644
index 0000000..685cd52
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeBackwardCompatibilityC.cmake
@@ -0,0 +1,96 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Nothing here yet
+if(CMAKE_GENERATOR MATCHES "Visual Studio 7")
+  include(CMakeVS7BackwardCompatibility)
+  set(CMAKE_SKIP_COMPATIBILITY_TESTS 1)
+endif()
+
+if(NOT CMAKE_SKIP_COMPATIBILITY_TESTS)
+  # Old CMake versions did not support OS X universal binaries anyway,
+  # so just get through this with at least some size for the types.
+  list(LENGTH CMAKE_OSX_ARCHITECTURES NUM_ARCHS)
+  if(${NUM_ARCHS} GREATER 1)
+    if(NOT DEFINED CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
+      message(WARNING "This module does not work with OS X universal binaries.")
+      set(__ERASE_CMAKE_TRY_COMPILE_OSX_ARCHITECTURES 1)
+      list(GET CMAKE_OSX_ARCHITECTURES 0 CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
+    endif()
+  endif()
+
+  include (CheckTypeSize)
+  CHECK_TYPE_SIZE(int      CMAKE_SIZEOF_INT)
+  CHECK_TYPE_SIZE(long     CMAKE_SIZEOF_LONG)
+  CHECK_TYPE_SIZE("void*"  CMAKE_SIZEOF_VOID_P)
+  CHECK_TYPE_SIZE(char     CMAKE_SIZEOF_CHAR)
+  CHECK_TYPE_SIZE(short    CMAKE_SIZEOF_SHORT)
+  CHECK_TYPE_SIZE(float    CMAKE_SIZEOF_FLOAT)
+  CHECK_TYPE_SIZE(double   CMAKE_SIZEOF_DOUBLE)
+
+  include (CheckIncludeFile)
+  CHECK_INCLUDE_FILE("limits.h"       CMAKE_HAVE_LIMITS_H)
+  CHECK_INCLUDE_FILE("unistd.h"       CMAKE_HAVE_UNISTD_H)
+  CHECK_INCLUDE_FILE("pthread.h"      CMAKE_HAVE_PTHREAD_H)
+
+  include (CheckIncludeFiles)
+  CHECK_INCLUDE_FILES("sys/types.h;sys/prctl.h"    CMAKE_HAVE_SYS_PRCTL_H)
+
+  include (TestBigEndian)
+  TEST_BIG_ENDIAN(CMAKE_WORDS_BIGENDIAN)
+  include (FindX11)
+
+  if("${X11_X11_INCLUDE_PATH}" STREQUAL "/usr/include")
+    set (CMAKE_X_CFLAGS "" CACHE STRING "X11 extra flags.")
+  else()
+    set (CMAKE_X_CFLAGS "-I${X11_X11_INCLUDE_PATH}" CACHE STRING
+         "X11 extra flags.")
+  endif()
+  set (CMAKE_X_LIBS "${X11_LIBRARIES}" CACHE STRING
+       "Libraries and options used in X11 programs.")
+  set (CMAKE_HAS_X "${X11_FOUND}" CACHE INTERNAL "Is X11 around.")
+
+  include (FindThreads)
+
+  set (CMAKE_THREAD_LIBS        "${CMAKE_THREAD_LIBS_INIT}" CACHE STRING
+    "Thread library used.")
+
+  set (CMAKE_USE_PTHREADS       "${CMAKE_USE_PTHREADS_INIT}" CACHE BOOL
+     "Use the pthreads library.")
+
+  set (CMAKE_USE_WIN32_THREADS  "${CMAKE_USE_WIN32_THREADS_INIT}" CACHE BOOL
+       "Use the win32 thread library.")
+
+  set (CMAKE_HP_PTHREADS        ${CMAKE_HP_PTHREADS_INIT} CACHE BOOL
+     "Use HP pthreads.")
+
+  set (CMAKE_USE_SPROC          ${CMAKE_USE_SPROC_INIT} CACHE BOOL
+     "Use sproc libs.")
+
+  if(__ERASE_CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
+    set(CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
+    set(__ERASE_CMAKE_TRY_COMPILE_OSX_ARCHITECTURES)
+  endif()
+endif()
+
+mark_as_advanced(
+CMAKE_HP_PTHREADS
+CMAKE_THREAD_LIBS
+CMAKE_USE_PTHREADS
+CMAKE_USE_SPROC
+CMAKE_USE_WIN32_THREADS
+CMAKE_X_CFLAGS
+CMAKE_X_LIBS
+)
+
diff --git a/share/cmake-3.2/Modules/CMakeBackwardCompatibilityCXX.cmake b/share/cmake-3.6/Modules/CMakeBackwardCompatibilityCXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeBackwardCompatibilityCXX.cmake
rename to share/cmake-3.6/Modules/CMakeBackwardCompatibilityCXX.cmake
diff --git a/share/cmake-3.2/Modules/CMakeBorlandFindMake.cmake b/share/cmake-3.6/Modules/CMakeBorlandFindMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeBorlandFindMake.cmake
rename to share/cmake-3.6/Modules/CMakeBorlandFindMake.cmake
diff --git a/share/cmake-3.2/Modules/CMakeBuildSettings.cmake.in b/share/cmake-3.6/Modules/CMakeBuildSettings.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeBuildSettings.cmake.in
rename to share/cmake-3.6/Modules/CMakeBuildSettings.cmake.in
diff --git a/share/cmake-3.6/Modules/CMakeCCompiler.cmake.in b/share/cmake-3.6/Modules/CMakeCCompiler.cmake.in
new file mode 100644
index 0000000..f109a14
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCCompiler.cmake.in
@@ -0,0 +1,67 @@
+set(CMAKE_C_COMPILER "@CMAKE_C_COMPILER@")
+set(CMAKE_C_COMPILER_ARG1 "@CMAKE_C_COMPILER_ARG1@")
+set(CMAKE_C_COMPILER_ID "@CMAKE_C_COMPILER_ID@")
+set(CMAKE_C_COMPILER_VERSION "@CMAKE_C_COMPILER_VERSION@")
+set(CMAKE_C_COMPILER_WRAPPER "@CMAKE_C_COMPILER_WRAPPER@")
+set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "@CMAKE_C_STANDARD_COMPUTED_DEFAULT@")
+set(CMAKE_C_COMPILE_FEATURES "@CMAKE_C_COMPILE_FEATURES@")
+set(CMAKE_C90_COMPILE_FEATURES "@CMAKE_C90_COMPILE_FEATURES@")
+set(CMAKE_C99_COMPILE_FEATURES "@CMAKE_C99_COMPILE_FEATURES@")
+set(CMAKE_C11_COMPILE_FEATURES "@CMAKE_C11_COMPILE_FEATURES@")
+
+set(CMAKE_C_PLATFORM_ID "@CMAKE_C_PLATFORM_ID@")
+set(CMAKE_C_SIMULATE_ID "@CMAKE_C_SIMULATE_ID@")
+set(CMAKE_C_SIMULATE_VERSION "@CMAKE_C_SIMULATE_VERSION@")
+@SET_MSVC_C_ARCHITECTURE_ID@
+set(CMAKE_AR "@CMAKE_AR@")
+set(CMAKE_RANLIB "@CMAKE_RANLIB@")
+set(CMAKE_LINKER "@CMAKE_LINKER@")
+set(CMAKE_COMPILER_IS_GNUCC @CMAKE_COMPILER_IS_GNUCC@)
+set(CMAKE_C_COMPILER_LOADED 1)
+set(CMAKE_C_COMPILER_WORKS @CMAKE_C_COMPILER_WORKS@)
+set(CMAKE_C_ABI_COMPILED @CMAKE_C_ABI_COMPILED@)
+set(CMAKE_COMPILER_IS_MINGW @CMAKE_COMPILER_IS_MINGW@)
+set(CMAKE_COMPILER_IS_CYGWIN @CMAKE_COMPILER_IS_CYGWIN@)
+if(CMAKE_COMPILER_IS_CYGWIN)
+  set(CYGWIN 1)
+  set(UNIX 1)
+endif()
+
+set(CMAKE_C_COMPILER_ENV_VAR "CC")
+
+if(CMAKE_COMPILER_IS_MINGW)
+  set(MINGW 1)
+endif()
+set(CMAKE_C_COMPILER_ID_RUN 1)
+set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
+set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
+set(CMAKE_C_LINKER_PREFERENCE 10)
+
+# Save compiler ABI information.
+set(CMAKE_C_SIZEOF_DATA_PTR "@CMAKE_C_SIZEOF_DATA_PTR@")
+set(CMAKE_C_COMPILER_ABI "@CMAKE_C_COMPILER_ABI@")
+set(CMAKE_C_LIBRARY_ARCHITECTURE "@CMAKE_C_LIBRARY_ARCHITECTURE@")
+
+if(CMAKE_C_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_C_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
+endif()
+
+if(CMAKE_C_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "@CMAKE_C_LIBRARY_ARCHITECTURE@")
+endif()
+
+set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "@CMAKE_C_CL_SHOWINCLUDES_PREFIX@")
+if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+@CMAKE_C_SYSROOT_FLAG_CODE@
+@CMAKE_C_OSX_DEPLOYMENT_TARGET_FLAG_CODE@
+
+set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "@CMAKE_C_IMPLICIT_LINK_LIBRARIES@")
+set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "@CMAKE_C_IMPLICIT_LINK_DIRECTORIES@")
+set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "@CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES@")
diff --git a/share/cmake-3.6/Modules/CMakeCCompilerABI.c b/share/cmake-3.6/Modules/CMakeCCompilerABI.c
new file mode 100644
index 0000000..55f9a9b
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCCompilerABI.c
@@ -0,0 +1,25 @@
+#ifdef __cplusplus
+#error "A C++ compiler has been selected for C."
+#endif
+
+#ifdef __CLASSIC_C__
+#define const
+#endif
+
+#include "CMakeCompilerABI.h"
+
+#ifdef __CLASSIC_C__
+int main(argc, argv) int argc;
+char* argv[];
+#else
+int main(int argc, char* argv[])
+#endif
+{
+  int require = 0;
+  require += info_sizeof_dptr[argc];
+#if defined(ABI_ID)
+  require += info_abi[argc];
+#endif
+  (void)argv;
+  return require;
+}
diff --git a/share/cmake-3.6/Modules/CMakeCCompilerId.c.in b/share/cmake-3.6/Modules/CMakeCCompilerId.c.in
new file mode 100644
index 0000000..95184c9
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCCompilerId.c.in
@@ -0,0 +1,83 @@
+#ifdef __cplusplus
+# error "A C++ compiler has been selected for C."
+#endif
+
+#if defined(__18CXX)
+# define ID_VOID_MAIN
+#endif
+#if defined(__CLASSIC_C__)
+/* cv-qualifiers did not exist in K&R C */
+# define const
+# define volatile
+#endif
+
+@CMAKE_C_COMPILER_ID_CONTENT@
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXE) || defined(__CRAYXC)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+@CMAKE_C_COMPILER_ID_PLATFORM_CONTENT@
+@CMAKE_C_COMPILER_ID_ERROR_FOR_TEST@
+
+#if !defined(__STDC__)
+# if defined(_MSC_VER) && !defined(__clang__)
+#  define C_DIALECT "90"
+# else
+#  define C_DIALECT
+# endif
+#elif __STDC_VERSION__ >= 201000L
+# define C_DIALECT "11"
+#elif __STDC_VERSION__ >= 199901L
+# define C_DIALECT "99"
+#else
+# define C_DIALECT "90"
+#endif
+const char* info_language_dialect_default =
+  "INFO" ":" "dialect_default[" C_DIALECT "]";
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef ID_VOID_MAIN
+void main() {}
+#else
+# if defined(__CLASSIC_C__)
+int main(argc, argv) int argc; char *argv[];
+# else
+int main(int argc, char* argv[])
+# endif
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXE) || defined(__CRAYXC)
+  require += info_cray[argc];
+#endif
+  require += info_language_dialect_default[argc];
+  (void)argv;
+  return require;
+}
+#endif
diff --git a/share/cmake-3.6/Modules/CMakeCInformation.cmake b/share/cmake-3.6/Modules/CMakeCInformation.cmake
new file mode 100644
index 0000000..fa87ca8
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCInformation.cmake
@@ -0,0 +1,227 @@
+
+#=============================================================================
+# Copyright 2004-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file sets the basic flags for the C language in CMake.
+# It also loads the available platform file for the system-compiler
+# if it exists.
+# It also loads a system - compiler - processor (or target hardware)
+# specific file, which is mainly useful for crosscompiling and embedded systems.
+
+include(CMakeLanguageInformation)
+
+# some compilers use different extensions (e.g. sdcc uses .rel)
+# so set the extension here first so it can be overridden by the compiler specific file
+if(UNIX)
+  set(CMAKE_C_OUTPUT_EXTENSION .o)
+else()
+  set(CMAKE_C_OUTPUT_EXTENSION .obj)
+endif()
+
+set(_INCLUDED_FILE 0)
+
+# Load compiler-specific information.
+if(CMAKE_C_COMPILER_ID)
+  include(Compiler/${CMAKE_C_COMPILER_ID}-C OPTIONAL)
+endif()
+
+set(CMAKE_BASE_NAME)
+get_filename_component(CMAKE_BASE_NAME "${CMAKE_C_COMPILER}" NAME_WE)
+if(CMAKE_COMPILER_IS_GNUCC)
+  set(CMAKE_BASE_NAME gcc)
+endif()
+
+
+# load a hardware specific file, mostly useful for embedded compilers
+if(CMAKE_SYSTEM_PROCESSOR)
+  if(CMAKE_C_COMPILER_ID)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_C_COMPILER_ID}-C-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
+  endif()
+  if (NOT _INCLUDED_FILE)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL)
+  endif ()
+endif()
+
+
+# load the system- and compiler specific files
+if(CMAKE_C_COMPILER_ID)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_C_COMPILER_ID}-C
+    OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
+endif()
+if (NOT _INCLUDED_FILE)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}
+    OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
+endif ()
+
+# load any compiler-wrapper specific information
+if (CMAKE_C_COMPILER_WRAPPER)
+  __cmake_include_compiler_wrapper(C)
+endif ()
+
+# We specify the compiler information in the system file for some
+# platforms, but this language may not have been enabled when the file
+# was first included.  Include it again to get the language info.
+# Remove this when all compiler info is removed from system files.
+if (NOT _INCLUDED_FILE)
+  include(Platform/${CMAKE_SYSTEM_NAME} OPTIONAL)
+endif ()
+
+if(CMAKE_C_SIZEOF_DATA_PTR)
+  foreach(f ${CMAKE_C_ABI_FILES})
+    include(${f})
+  endforeach()
+  unset(CMAKE_C_ABI_FILES)
+endif()
+
+# This should be included before the _INIT variables are
+# used to initialize the cache.  Since the rule variables
+# have if blocks on them, users can still define them here.
+# But, it should still be after the platform file so changes can
+# be made to those values.
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
+endif()
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE_C)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_C} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE_C "${_override}")
+endif()
+
+
+# for most systems a module is the same as a shared library
+# so unless the variable CMAKE_MODULE_EXISTS is set just
+# copy the values from the LIBRARY variables
+if(NOT CMAKE_MODULE_EXISTS)
+  set(CMAKE_SHARED_MODULE_C_FLAGS ${CMAKE_SHARED_LIBRARY_C_FLAGS})
+  set(CMAKE_SHARED_MODULE_CREATE_C_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS})
+endif()
+
+set(CMAKE_C_FLAGS_INIT "$ENV{CFLAGS} ${CMAKE_C_FLAGS_INIT}")
+# avoid just having a space as the initial value for the cache
+if(CMAKE_C_FLAGS_INIT STREQUAL " ")
+  set(CMAKE_C_FLAGS_INIT)
+endif()
+set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS_INIT}" CACHE STRING
+     "Flags used by the compiler during all build types.")
+
+if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
+# default build type is none
+  if(NOT CMAKE_NO_BUILD_TYPE)
+    set (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING
+      "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel.")
+  endif()
+  set (CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG_INIT}" CACHE STRING
+    "Flags used by the compiler during debug builds.")
+  set (CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL_INIT}" CACHE STRING
+    "Flags used by the compiler during release builds for minimum size.")
+  set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE_INIT}" CACHE STRING
+    "Flags used by the compiler during release builds.")
+  set (CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
+    "Flags used by the compiler during release builds with debug info.")
+endif()
+
+if(CMAKE_C_STANDARD_LIBRARIES_INIT)
+  set(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES_INIT}"
+    CACHE STRING "Libraries linked by default with all C applications.")
+  mark_as_advanced(CMAKE_C_STANDARD_LIBRARIES)
+endif()
+
+include(CMakeCommonLanguageInclude)
+
+# now define the following rule variables
+
+# CMAKE_C_CREATE_SHARED_LIBRARY
+# CMAKE_C_CREATE_SHARED_MODULE
+# CMAKE_C_COMPILE_OBJECT
+# CMAKE_C_LINK_EXECUTABLE
+
+# variables supplied by the generator at use time
+# <TARGET>
+# <TARGET_BASE> the target without the suffix
+# <OBJECTS>
+# <OBJECT>
+# <LINK_LIBRARIES>
+# <FLAGS>
+# <LINK_FLAGS>
+
+# C compiler information
+# <CMAKE_C_COMPILER>
+# <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS>
+# <CMAKE_SHARED_MODULE_CREATE_C_FLAGS>
+# <CMAKE_C_LINK_FLAGS>
+
+# Static library tools
+# <CMAKE_AR>
+# <CMAKE_RANLIB>
+
+
+# create a C shared library
+if(NOT CMAKE_C_CREATE_SHARED_LIBRARY)
+  set(CMAKE_C_CREATE_SHARED_LIBRARY
+      "<CMAKE_C_COMPILER> <CMAKE_SHARED_LIBRARY_C_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS> <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
+endif()
+
+# create a C shared module just copy the shared library rule
+if(NOT CMAKE_C_CREATE_SHARED_MODULE)
+  set(CMAKE_C_CREATE_SHARED_MODULE ${CMAKE_C_CREATE_SHARED_LIBRARY})
+endif()
+
+# Create a static archive incrementally for large object file counts.
+# If CMAKE_C_CREATE_STATIC_LIBRARY is set it will override these.
+if(NOT DEFINED CMAKE_C_ARCHIVE_CREATE)
+  set(CMAKE_C_ARCHIVE_CREATE "<CMAKE_AR> qc <TARGET> <LINK_FLAGS> <OBJECTS>")
+endif()
+if(NOT DEFINED CMAKE_C_ARCHIVE_APPEND)
+  set(CMAKE_C_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
+endif()
+if(NOT DEFINED CMAKE_C_ARCHIVE_FINISH)
+  set(CMAKE_C_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
+endif()
+
+# compile a C file into an object file
+if(NOT CMAKE_C_COMPILE_OBJECT)
+  set(CMAKE_C_COMPILE_OBJECT
+    "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT>   -c <SOURCE>")
+endif()
+
+if(NOT CMAKE_C_LINK_EXECUTABLE)
+  set(CMAKE_C_LINK_EXECUTABLE
+    "<CMAKE_C_COMPILER> <FLAGS> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RUNTIME_C_FLAG)
+  set(CMAKE_EXECUTABLE_RUNTIME_C_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG})
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RUNTIME_C_FLAG_SEP)
+  set(CMAKE_EXECUTABLE_RUNTIME_C_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP})
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RPATH_LINK_C_FLAG)
+  set(CMAKE_EXECUTABLE_RPATH_LINK_C_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG})
+endif()
+
+mark_as_advanced(
+CMAKE_C_FLAGS
+CMAKE_C_FLAGS_DEBUG
+CMAKE_C_FLAGS_MINSIZEREL
+CMAKE_C_FLAGS_RELEASE
+CMAKE_C_FLAGS_RELWITHDEBINFO
+)
+set(CMAKE_C_INFORMATION_LOADED 1)
+
+
diff --git a/share/cmake-3.6/Modules/CMakeCXXCompiler.cmake.in b/share/cmake-3.6/Modules/CMakeCXXCompiler.cmake.in
new file mode 100644
index 0000000..9e90aea
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCXXCompiler.cmake.in
@@ -0,0 +1,68 @@
+set(CMAKE_CXX_COMPILER "@CMAKE_CXX_COMPILER@")
+set(CMAKE_CXX_COMPILER_ARG1 "@CMAKE_CXX_COMPILER_ARG1@")
+set(CMAKE_CXX_COMPILER_ID "@CMAKE_CXX_COMPILER_ID@")
+set(CMAKE_CXX_COMPILER_VERSION "@CMAKE_CXX_COMPILER_VERSION@")
+set(CMAKE_CXX_COMPILER_WRAPPER "@CMAKE_CXX_COMPILER_WRAPPER@")
+set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "@CMAKE_CXX_STANDARD_COMPUTED_DEFAULT@")
+set(CMAKE_CXX_COMPILE_FEATURES "@CMAKE_CXX_COMPILE_FEATURES@")
+set(CMAKE_CXX98_COMPILE_FEATURES "@CMAKE_CXX98_COMPILE_FEATURES@")
+set(CMAKE_CXX11_COMPILE_FEATURES "@CMAKE_CXX11_COMPILE_FEATURES@")
+set(CMAKE_CXX14_COMPILE_FEATURES "@CMAKE_CXX14_COMPILE_FEATURES@")
+
+set(CMAKE_CXX_PLATFORM_ID "@CMAKE_CXX_PLATFORM_ID@")
+set(CMAKE_CXX_SIMULATE_ID "@CMAKE_CXX_SIMULATE_ID@")
+set(CMAKE_CXX_SIMULATE_VERSION "@CMAKE_CXX_SIMULATE_VERSION@")
+@SET_MSVC_CXX_ARCHITECTURE_ID@
+set(CMAKE_AR "@CMAKE_AR@")
+set(CMAKE_RANLIB "@CMAKE_RANLIB@")
+set(CMAKE_LINKER "@CMAKE_LINKER@")
+set(CMAKE_COMPILER_IS_GNUCXX @CMAKE_COMPILER_IS_GNUCXX@)
+set(CMAKE_CXX_COMPILER_LOADED 1)
+set(CMAKE_CXX_COMPILER_WORKS @CMAKE_CXX_COMPILER_WORKS@)
+set(CMAKE_CXX_ABI_COMPILED @CMAKE_CXX_ABI_COMPILED@)
+set(CMAKE_COMPILER_IS_MINGW @CMAKE_COMPILER_IS_MINGW@)
+set(CMAKE_COMPILER_IS_CYGWIN @CMAKE_COMPILER_IS_CYGWIN@)
+if(CMAKE_COMPILER_IS_CYGWIN)
+  set(CYGWIN 1)
+  set(UNIX 1)
+endif()
+
+set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
+
+if(CMAKE_COMPILER_IS_MINGW)
+  set(MINGW 1)
+endif()
+set(CMAKE_CXX_COMPILER_ID_RUN 1)
+set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
+set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;mm;CPP)
+set(CMAKE_CXX_LINKER_PREFERENCE 30)
+set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
+
+# Save compiler ABI information.
+set(CMAKE_CXX_SIZEOF_DATA_PTR "@CMAKE_CXX_SIZEOF_DATA_PTR@")
+set(CMAKE_CXX_COMPILER_ABI "@CMAKE_CXX_COMPILER_ABI@")
+set(CMAKE_CXX_LIBRARY_ARCHITECTURE "@CMAKE_CXX_LIBRARY_ARCHITECTURE@")
+
+if(CMAKE_CXX_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_CXX_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
+endif()
+
+if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "@CMAKE_CXX_LIBRARY_ARCHITECTURE@")
+endif()
+
+set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "@CMAKE_CXX_CL_SHOWINCLUDES_PREFIX@")
+if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+@CMAKE_CXX_SYSROOT_FLAG_CODE@
+@CMAKE_CXX_OSX_DEPLOYMENT_TARGET_FLAG_CODE@
+
+set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "@CMAKE_CXX_IMPLICIT_LINK_LIBRARIES@")
+set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "@CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES@")
+set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "@CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES@")
diff --git a/share/cmake-3.6/Modules/CMakeCXXCompilerABI.cpp b/share/cmake-3.6/Modules/CMakeCXXCompilerABI.cpp
new file mode 100644
index 0000000..2dee883
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCXXCompilerABI.cpp
@@ -0,0 +1,16 @@
+#ifndef __cplusplus
+#error "A C compiler has been selected for C++."
+#endif
+
+#include "CMakeCompilerABI.h"
+
+int main(int argc, char* argv[])
+{
+  int require = 0;
+  require += info_sizeof_dptr[argc];
+#if defined(ABI_ID)
+  require += info_abi[argc];
+#endif
+  (void)argv;
+  return require;
+}
diff --git a/share/cmake-3.6/Modules/CMakeCXXCompilerId.cpp.in b/share/cmake-3.6/Modules/CMakeCXXCompilerId.cpp.in
new file mode 100644
index 0000000..3e5c0fc
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCXXCompilerId.cpp.in
@@ -0,0 +1,62 @@
+/* This source file must have a .cpp extension so that all C++ compilers
+   recognize the extension without flags.  Borland does not know .cxx for
+   example.  */
+#ifndef __cplusplus
+# error "A C compiler has been selected for C++."
+#endif
+
+@CMAKE_CXX_COMPILER_ID_CONTENT@
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXE) || defined(__CRAYXC)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+@CMAKE_CXX_COMPILER_ID_PLATFORM_CONTENT@
+@CMAKE_CXX_COMPILER_ID_ERROR_FOR_TEST@
+
+const char* info_language_dialect_default = "INFO" ":" "dialect_default["
+#if __cplusplus >= 201402L
+  "14"
+#elif __cplusplus >= 201103L
+  "11"
+#else
+  "98"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+int main(int argc, char* argv[])
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXE) || defined(__CRAYXC)
+  require += info_cray[argc];
+#endif
+  require += info_language_dialect_default[argc];
+  (void)argv;
+  return require;
+}
diff --git a/share/cmake-3.6/Modules/CMakeCXXInformation.cmake b/share/cmake-3.6/Modules/CMakeCXXInformation.cmake
new file mode 100644
index 0000000..b35280f
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCXXInformation.cmake
@@ -0,0 +1,306 @@
+
+#=============================================================================
+# Copyright 2004-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file sets the basic flags for the C++ language in CMake.
+# It also loads the available platform file for the system-compiler
+# if it exists.
+# It also loads a system - compiler - processor (or target hardware)
+# specific file, which is mainly useful for crosscompiling and embedded systems.
+
+include(CMakeLanguageInformation)
+
+# some compilers use different extensions (e.g. sdcc uses .rel)
+# so set the extension here first so it can be overridden by the compiler specific file
+if(UNIX)
+  set(CMAKE_CXX_OUTPUT_EXTENSION .o)
+else()
+  set(CMAKE_CXX_OUTPUT_EXTENSION .obj)
+endif()
+
+set(_INCLUDED_FILE 0)
+
+# Load compiler-specific information.
+if(CMAKE_CXX_COMPILER_ID)
+  include(Compiler/${CMAKE_CXX_COMPILER_ID}-CXX OPTIONAL)
+endif()
+
+set(CMAKE_BASE_NAME)
+get_filename_component(CMAKE_BASE_NAME "${CMAKE_CXX_COMPILER}" NAME_WE)
+# since the gnu compiler has several names force g++
+if(CMAKE_COMPILER_IS_GNUCXX)
+  set(CMAKE_BASE_NAME g++)
+endif()
+
+
+# load a hardware specific file, mostly useful for embedded compilers
+if(CMAKE_SYSTEM_PROCESSOR)
+  if(CMAKE_CXX_COMPILER_ID)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_CXX_COMPILER_ID}-CXX-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
+  endif()
+  if (NOT _INCLUDED_FILE)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL)
+  endif ()
+endif()
+
+# load the system- and compiler specific files
+if(CMAKE_CXX_COMPILER_ID)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_CXX_COMPILER_ID}-CXX OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
+endif()
+if (NOT _INCLUDED_FILE)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL
+          RESULT_VARIABLE _INCLUDED_FILE)
+endif ()
+
+# load any compiler-wrapper specific information
+if (CMAKE_CXX_COMPILER_WRAPPER)
+  __cmake_include_compiler_wrapper(CXX)
+endif ()
+
+# We specify the compiler information in the system file for some
+# platforms, but this language may not have been enabled when the file
+# was first included.  Include it again to get the language info.
+# Remove this when all compiler info is removed from system files.
+if (NOT _INCLUDED_FILE)
+  include(Platform/${CMAKE_SYSTEM_NAME} OPTIONAL)
+endif ()
+
+if(CMAKE_CXX_SIZEOF_DATA_PTR)
+  foreach(f ${CMAKE_CXX_ABI_FILES})
+    include(${f})
+  endforeach()
+  unset(CMAKE_CXX_ABI_FILES)
+endif()
+
+# This should be included before the _INIT variables are
+# used to initialize the cache.  Since the rule variables
+# have if blocks on them, users can still define them here.
+# But, it should still be after the platform file so changes can
+# be made to those values.
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
+endif()
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE_CXX)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_CXX} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE_CXX "${_override}")
+endif()
+
+
+# Create a set of shared library variable specific to C++
+# For 90% of the systems, these are the same flags as the C versions
+# so if these are not set just copy the flags from the c version
+if(NOT CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS)
+  set(CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS})
+endif()
+
+if(NOT CMAKE_CXX_COMPILE_OPTIONS_PIC)
+  set(CMAKE_CXX_COMPILE_OPTIONS_PIC ${CMAKE_C_COMPILE_OPTIONS_PIC})
+endif()
+
+if(NOT CMAKE_CXX_COMPILE_OPTIONS_PIE)
+  set(CMAKE_CXX_COMPILE_OPTIONS_PIE ${CMAKE_C_COMPILE_OPTIONS_PIE})
+endif()
+
+if(NOT CMAKE_CXX_COMPILE_OPTIONS_DLL)
+  set(CMAKE_CXX_COMPILE_OPTIONS_DLL ${CMAKE_C_COMPILE_OPTIONS_DLL})
+endif()
+
+if(NOT CMAKE_SHARED_LIBRARY_CXX_FLAGS)
+  set(CMAKE_SHARED_LIBRARY_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_C_FLAGS})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS)
+  set(CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_LINK_C_FLAGS})
+endif()
+
+if(NOT CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG)
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG})
+endif()
+
+if(NOT CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP)
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP})
+endif()
+
+if(NOT CMAKE_SHARED_LIBRARY_RPATH_LINK_CXX_FLAG)
+  set(CMAKE_SHARED_LIBRARY_RPATH_LINK_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_EXE_EXPORTS_CXX_FLAG)
+  set(CMAKE_EXE_EXPORTS_CXX_FLAG ${CMAKE_EXE_EXPORTS_C_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_SONAME_CXX_FLAG)
+  set(CMAKE_SHARED_LIBRARY_SONAME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_SONAME_C_FLAG})
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG)
+  set(CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG})
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG_SEP)
+  set(CMAKE_EXECUTABLE_RUNTIME_CXX_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP})
+endif()
+
+if(NOT CMAKE_EXECUTABLE_RPATH_LINK_CXX_FLAG)
+  set(CMAKE_EXECUTABLE_RPATH_LINK_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_CXX_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_CXX_WITH_RUNTIME_PATH)
+  set(CMAKE_SHARED_LIBRARY_LINK_CXX_WITH_RUNTIME_PATH ${CMAKE_SHARED_LIBRARY_LINK_C_WITH_RUNTIME_PATH})
+endif()
+
+if(NOT CMAKE_INCLUDE_FLAG_CXX)
+  set(CMAKE_INCLUDE_FLAG_CXX ${CMAKE_INCLUDE_FLAG_C})
+endif()
+
+if(NOT CMAKE_INCLUDE_FLAG_SEP_CXX)
+  set(CMAKE_INCLUDE_FLAG_SEP_CXX ${CMAKE_INCLUDE_FLAG_SEP_C})
+endif()
+
+# for most systems a module is the same as a shared library
+# so unless the variable CMAKE_MODULE_EXISTS is set just
+# copy the values from the LIBRARY variables
+if(NOT CMAKE_MODULE_EXISTS)
+  set(CMAKE_SHARED_MODULE_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_CXX_FLAGS})
+  set(CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS})
+endif()
+
+# repeat for modules
+if(NOT CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS)
+  set(CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS ${CMAKE_SHARED_MODULE_CREATE_C_FLAGS})
+endif()
+
+if(NOT CMAKE_SHARED_MODULE_CXX_FLAGS)
+  set(CMAKE_SHARED_MODULE_CXX_FLAGS ${CMAKE_SHARED_MODULE_C_FLAGS})
+endif()
+
+# Initialize CXX link type selection flags from C versions.
+foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+  if(NOT CMAKE_${type}_LINK_STATIC_CXX_FLAGS)
+    set(CMAKE_${type}_LINK_STATIC_CXX_FLAGS
+      ${CMAKE_${type}_LINK_STATIC_C_FLAGS})
+  endif()
+  if(NOT CMAKE_${type}_LINK_DYNAMIC_CXX_FLAGS)
+    set(CMAKE_${type}_LINK_DYNAMIC_CXX_FLAGS
+      ${CMAKE_${type}_LINK_DYNAMIC_C_FLAGS})
+  endif()
+endforeach()
+
+# add the flags to the cache based
+# on the initial values computed in the platform/*.cmake files
+# use _INIT variables so that this only happens the first time
+# and you can set these flags in the cmake cache
+set(CMAKE_CXX_FLAGS_INIT "$ENV{CXXFLAGS} ${CMAKE_CXX_FLAGS_INIT}")
+# avoid just having a space as the initial value for the cache
+if(CMAKE_CXX_FLAGS_INIT STREQUAL " ")
+  set(CMAKE_CXX_FLAGS_INIT)
+endif()
+set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS_INIT}" CACHE STRING
+     "Flags used by the compiler during all build types.")
+
+if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
+  set (CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG_INIT}" CACHE STRING
+     "Flags used by the compiler during debug builds.")
+  set (CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL_INIT}" CACHE STRING
+     "Flags used by the compiler during release builds for minimum size.")
+  set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE_INIT}" CACHE STRING
+     "Flags used by the compiler during release builds.")
+  set (CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
+     "Flags used by the compiler during release builds with debug info.")
+
+endif()
+
+if(CMAKE_CXX_STANDARD_LIBRARIES_INIT)
+  set(CMAKE_CXX_STANDARD_LIBRARIES "${CMAKE_CXX_STANDARD_LIBRARIES_INIT}"
+    CACHE STRING "Libraries linked by default with all C++ applications.")
+  mark_as_advanced(CMAKE_CXX_STANDARD_LIBRARIES)
+endif()
+
+include(CMakeCommonLanguageInclude)
+
+# now define the following rules:
+# CMAKE_CXX_CREATE_SHARED_LIBRARY
+# CMAKE_CXX_CREATE_SHARED_MODULE
+# CMAKE_CXX_COMPILE_OBJECT
+# CMAKE_CXX_LINK_EXECUTABLE
+
+# variables supplied by the generator at use time
+# <TARGET>
+# <TARGET_BASE> the target without the suffix
+# <OBJECTS>
+# <OBJECT>
+# <LINK_LIBRARIES>
+# <FLAGS>
+# <LINK_FLAGS>
+
+# CXX compiler information
+# <CMAKE_CXX_COMPILER>
+# <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS>
+# <CMAKE_CXX_SHARED_MODULE_CREATE_FLAGS>
+# <CMAKE_CXX_LINK_FLAGS>
+
+# Static library tools
+# <CMAKE_AR>
+# <CMAKE_RANLIB>
+
+
+# create a shared C++ library
+if(NOT CMAKE_CXX_CREATE_SHARED_LIBRARY)
+  set(CMAKE_CXX_CREATE_SHARED_LIBRARY
+      "<CMAKE_CXX_COMPILER> <CMAKE_SHARED_LIBRARY_CXX_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS> <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
+endif()
+
+# create a c++ shared module copy the shared library rule by default
+if(NOT CMAKE_CXX_CREATE_SHARED_MODULE)
+  set(CMAKE_CXX_CREATE_SHARED_MODULE ${CMAKE_CXX_CREATE_SHARED_LIBRARY})
+endif()
+
+
+# Create a static archive incrementally for large object file counts.
+# If CMAKE_CXX_CREATE_STATIC_LIBRARY is set it will override these.
+if(NOT DEFINED CMAKE_CXX_ARCHIVE_CREATE)
+  set(CMAKE_CXX_ARCHIVE_CREATE "<CMAKE_AR> qc <TARGET> <LINK_FLAGS> <OBJECTS>")
+endif()
+if(NOT DEFINED CMAKE_CXX_ARCHIVE_APPEND)
+  set(CMAKE_CXX_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
+endif()
+if(NOT DEFINED CMAKE_CXX_ARCHIVE_FINISH)
+  set(CMAKE_CXX_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
+endif()
+
+# compile a C++ file into an object file
+if(NOT CMAKE_CXX_COMPILE_OBJECT)
+  set(CMAKE_CXX_COMPILE_OBJECT
+    "<CMAKE_CXX_COMPILER>  <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
+endif()
+
+if(NOT CMAKE_CXX_LINK_EXECUTABLE)
+  set(CMAKE_CXX_LINK_EXECUTABLE
+    "<CMAKE_CXX_COMPILER>  <FLAGS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+endif()
+
+mark_as_advanced(
+CMAKE_VERBOSE_MAKEFILE
+CMAKE_CXX_FLAGS
+CMAKE_CXX_FLAGS_RELEASE
+CMAKE_CXX_FLAGS_RELWITHDEBINFO
+CMAKE_CXX_FLAGS_MINSIZEREL
+CMAKE_CXX_FLAGS_DEBUG)
+
+set(CMAKE_CXX_INFORMATION_LOADED 1)
+
diff --git a/share/cmake-3.6/Modules/CMakeCheckCompilerFlagCommonPatterns.cmake b/share/cmake-3.6/Modules/CMakeCheckCompilerFlagCommonPatterns.cmake
new file mode 100644
index 0000000..a350a84
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCheckCompilerFlagCommonPatterns.cmake
@@ -0,0 +1,46 @@
+
+#=============================================================================
+# Copyright 2006-2011 Kitware, Inc.
+# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
+# Copyright 2011 Matthias Kretz <kretz@kde.org>
+# Copyright 2013 Rolf Eike Beer <eike@sf-mail.de>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Do NOT include this module directly into any of your code. It is meant as
+# a library for Check*CompilerFlag.cmake modules. It's content may change in
+# any way between releases.
+
+macro (CHECK_COMPILER_FLAG_COMMON_PATTERNS _VAR)
+   set(${_VAR}
+     FAIL_REGEX "[Uu]nrecogni[sz]ed .*option"               # GNU, NAG
+     FAIL_REGEX "unknown .*option"                          # Clang
+     FAIL_REGEX "optimization flag .* not supported"        # Clang
+     FAIL_REGEX "unknown argument ignored"                  # Clang (cl)
+     FAIL_REGEX "ignoring unknown option"                   # MSVC, Intel
+     FAIL_REGEX "warning D9002"                             # MSVC, any lang
+     FAIL_REGEX "option.*not supported"                     # Intel
+     FAIL_REGEX "invalid argument .*option"                 # Intel
+     FAIL_REGEX "ignoring option .*argument required"       # Intel
+     FAIL_REGEX "ignoring option .*argument is of wrong type" # Intel
+     FAIL_REGEX "[Uu]nknown option"                         # HP
+     FAIL_REGEX "[Ww]arning: [Oo]ption"                     # SunPro
+     FAIL_REGEX "command option .* is not recognized"       # XL
+     FAIL_REGEX "command option .* contains an incorrect subargument" # XL
+     FAIL_REGEX "not supported in this configuration. ignored"       # AIX
+     FAIL_REGEX "File with unknown suffix passed to linker" # PGI
+     FAIL_REGEX "[Uu]nknown switch"                         # PGI
+     FAIL_REGEX "WARNING: unknown flag:"                    # Open64
+     FAIL_REGEX "Incorrect command line option:"            # Borland
+     FAIL_REGEX "Warning: illegal option"                   # SunStudio 12
+     FAIL_REGEX "[Ww]arning: Invalid suboption"             # Fujitsu
+   )
+endmacro ()
diff --git a/share/cmake-3.2/Modules/CMakeCommonLanguageInclude.cmake b/share/cmake-3.6/Modules/CMakeCommonLanguageInclude.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeCommonLanguageInclude.cmake
rename to share/cmake-3.6/Modules/CMakeCommonLanguageInclude.cmake
diff --git a/share/cmake-3.6/Modules/CMakeCompilerABI.h b/share/cmake-3.6/Modules/CMakeCompilerABI.h
new file mode 100644
index 0000000..f2714b4
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCompilerABI.h
@@ -0,0 +1,34 @@
+
+/* Size of a pointer-to-data in bytes.  */
+#define SIZEOF_DPTR (sizeof(void*))
+const char info_sizeof_dptr[] = {
+  'I', 'N', 'F', 'O', ':', 's', 'i', 'z', 'e', 'o', 'f', '_', 'd', 'p', 't',
+  'r', '[', ('0' + ((SIZEOF_DPTR / 10) % 10)), ('0' + (SIZEOF_DPTR % 10)), ']',
+  '\0'
+  /* clang-format needs this comment to break after the opening brace */
+};
+
+/* Application Binary Interface.  */
+#if defined(__sgi) && defined(_ABIO32)
+#define ABI_ID "ELF O32"
+#elif defined(__sgi) && defined(_ABIN32)
+#define ABI_ID "ELF N32"
+#elif defined(__sgi) && defined(_ABI64)
+#define ABI_ID "ELF 64"
+
+/* Check for (some) ARM ABIs.
+ * See e.g. http://wiki.debian.org/ArmEabiPort for some information on this. */
+#elif defined(__GNU__) && defined(__ELF__) && defined(__ARM_EABI__)
+#define ABI_ID "ELF ARMEABI"
+#elif defined(__GNU__) && defined(__ELF__) && defined(__ARMEB__)
+#define ABI_ID "ELF ARM"
+#elif defined(__GNU__) && defined(__ELF__) && defined(__ARMEL__)
+#define ABI_ID "ELF ARM"
+
+#elif defined(__ELF__)
+#define ABI_ID "ELF"
+#endif
+
+#if defined(ABI_ID)
+static char const info_abi[] = "INFO:abi[" ABI_ID "]";
+#endif
diff --git a/share/cmake-3.6/Modules/CMakeCompilerIdDetection.cmake b/share/cmake-3.6/Modules/CMakeCompilerIdDetection.cmake
new file mode 100644
index 0000000..1d341e5
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeCompilerIdDetection.cmake
@@ -0,0 +1,159 @@
+
+#=============================================================================
+# Copyright 2014 Stephen Kelly <steveire@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(_readFile file)
+  include(${file})
+  get_filename_component(name ${file} NAME_WE)
+  string(REGEX REPLACE "-.*" "" CompilerId ${name})
+  set(_compiler_id_version_compute_${CompilerId} ${_compiler_id_version_compute} PARENT_SCOPE)
+  set(_compiler_id_simulate_${CompilerId} ${_compiler_id_simulate} PARENT_SCOPE)
+  set(_compiler_id_pp_test_${CompilerId} ${_compiler_id_pp_test} PARENT_SCOPE)
+endfunction()
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
+
+function(compiler_id_detection outvar lang)
+
+  if (NOT lang STREQUAL Fortran)
+    file(GLOB lang_files
+      "${CMAKE_ROOT}/Modules/Compiler/*-DetermineCompiler.cmake")
+    set(nonlang CXX)
+    if (lang STREQUAL CXX)
+      set(nonlang C)
+    endif()
+
+    file(GLOB nonlang_files
+      "${CMAKE_ROOT}/Modules/Compiler/*-${nonlang}-DetermineCompiler.cmake")
+    list(REMOVE_ITEM lang_files ${nonlang_files})
+  endif()
+
+  set(files ${lang_files})
+  if (files)
+    foreach(file ${files})
+      _readFile(${file})
+    endforeach()
+
+    set(options ID_STRING VERSION_STRINGS ID_DEFINE PLATFORM_DEFAULT_COMPILER)
+    set(oneValueArgs PREFIX)
+    cmake_parse_arguments(CID "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
+    if (CID_UNPARSED_ARGUMENTS)
+      message(FATAL_ERROR "Unrecognized arguments: \"${CID_UNPARSED_ARGUMENTS}\"")
+    endif()
+
+    # Order is relevant here. For example, compilers which pretend to be
+    # GCC must appear before the actual GCC.
+    if (lang STREQUAL CXX)
+      list(APPEND ordered_compilers
+        Comeau
+      )
+    endif()
+    list(APPEND ordered_compilers
+      Intel
+      PathScale
+      Embarcadero
+      Borland
+      Watcom
+      OpenWatcom
+      SunPro
+      HP
+      Compaq
+      zOS
+      XL
+      VisualAge
+      PGI
+      Cray
+      TI
+      Fujitsu
+    )
+    if (lang STREQUAL C)
+      list(APPEND ordered_compilers
+        TinyCC
+        Bruce
+      )
+    endif()
+    list(APPEND ordered_compilers
+      SCO
+      AppleClang
+      Clang
+      GNU
+      MSVC
+      ADSP
+      IAR
+      ARMCC
+    )
+    if (lang STREQUAL C)
+      list(APPEND ordered_compilers
+        SDCC
+      )
+    endif()
+    list(APPEND ordered_compilers
+      MIPSpro)
+
+    if(CID_ID_DEFINE)
+      foreach(Id ${ordered_compilers})
+        set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}# define ${CID_PREFIX}COMPILER_IS_${Id} 0\n")
+      endforeach()
+    endif()
+
+    set(pp_if "#if")
+    if (CID_VERSION_STRINGS)
+      set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}\n/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */\n")
+    endif()
+
+    foreach(Id ${ordered_compilers})
+      if (NOT _compiler_id_pp_test_${Id})
+        message(FATAL_ERROR "No preprocessor test for \"${Id}\"")
+      endif()
+      set(id_content "${pp_if} ${_compiler_id_pp_test_${Id}}\n")
+      if (CID_ID_STRING)
+        set(PREFIX ${CID_PREFIX})
+        string(CONFIGURE "${_compiler_id_simulate_${Id}}" SIMULATE_BLOCK @ONLY)
+        set(id_content "${id_content}# define ${CID_PREFIX}COMPILER_ID \"${Id}\"${SIMULATE_BLOCK}")
+      endif()
+      if (CID_ID_DEFINE)
+        set(id_content "${id_content}# undef ${CID_PREFIX}COMPILER_IS_${Id}\n")
+        set(id_content "${id_content}# define ${CID_PREFIX}COMPILER_IS_${Id} 1\n")
+      endif()
+      if (CID_VERSION_STRINGS)
+        set(PREFIX ${CID_PREFIX})
+        set(MACRO_DEC DEC)
+        set(MACRO_HEX HEX)
+        string(CONFIGURE "${_compiler_id_version_compute_${Id}}" VERSION_BLOCK @ONLY)
+        set(id_content "${id_content}${VERSION_BLOCK}\n")
+      endif()
+      set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}\n${id_content}")
+      set(pp_if "#elif")
+    endforeach()
+
+    if (CID_PLATFORM_DEFAULT_COMPILER)
+      set(platform_compiler_detection "
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__sgi)
+# define ${CID_PREFIX}COMPILER_ID \"MIPSpro\"
+
+#elif defined(__hpux) || defined(__hpua)
+# define ${CID_PREFIX}COMPILER_ID \"HP\"
+
+#else /* unknown compiler */
+# define ${CID_PREFIX}COMPILER_ID \"\"")
+    endif()
+
+    set(CMAKE_${lang}_COMPILER_ID_CONTENT "${CMAKE_${lang}_COMPILER_ID_CONTENT}\n${platform_compiler_detection}\n#endif")
+  endif()
+
+  set(${outvar} ${CMAKE_${lang}_COMPILER_ID_CONTENT} PARENT_SCOPE)
+endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeConfigurableFile.in b/share/cmake-3.6/Modules/CMakeConfigurableFile.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeConfigurableFile.in
rename to share/cmake-3.6/Modules/CMakeConfigurableFile.in
diff --git a/share/cmake-3.2/Modules/CMakeDependentOption.cmake b/share/cmake-3.6/Modules/CMakeDependentOption.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDependentOption.cmake
rename to share/cmake-3.6/Modules/CMakeDependentOption.cmake
diff --git a/share/cmake-3.2/Modules/CMakeDetermineASM-ATTCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineASM-ATTCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineASM-ATTCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineASM-ATTCompiler.cmake
diff --git a/share/cmake-3.6/Modules/CMakeDetermineASMCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineASMCompiler.cmake
new file mode 100644
index 0000000..91111d2
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeDetermineASMCompiler.cmake
@@ -0,0 +1,163 @@
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# determine the compiler to use for ASM programs
+
+include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
+
+if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER)
+  # prefer the environment variable ASM
+  if(NOT $ENV{ASM${ASM_DIALECT}} STREQUAL "")
+    set(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT "$ENV{ASM${ASM_DIALECT}}")
+  endif()
+
+  # finally list compilers to try
+  if("ASM${ASM_DIALECT}" STREQUAL "ASM") # the generic assembler support
+    if(NOT CMAKE_ASM_COMPILER_INIT)
+      if(CMAKE_C_COMPILER)
+        set(CMAKE_ASM_COMPILER "${CMAKE_C_COMPILER}" CACHE FILEPATH "The ASM compiler")
+        set(CMAKE_ASM_COMPILER_ID "${CMAKE_C_COMPILER_ID}")
+      elseif(CMAKE_CXX_COMPILER)
+        set(CMAKE_ASM_COMPILER "${CMAKE_CXX_COMPILER}" CACHE FILEPATH "The ASM compiler")
+        set(CMAKE_ASM_COMPILER_ID "${CMAKE_CXX_COMPILER_ID}")
+      else()
+        # List all default C and CXX compilers
+        set(CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST
+             ${_CMAKE_TOOLCHAIN_PREFIX}cc  ${_CMAKE_TOOLCHAIN_PREFIX}gcc cl bcc xlc
+          CC ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ aCC cl bcc xlC)
+      endif()
+    endif()
+  else() # some specific assembler "dialect"
+    if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT  AND NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST)
+      message(FATAL_ERROR "CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT or CMAKE_ASM${ASM_DIALECT}_COMPILER_LIST must be preset !")
+    endif()
+  endif()
+
+  # Find the compiler.
+  _cmake_find_compiler(ASM${ASM_DIALECT})
+
+else()
+  _cmake_find_compiler_path(ASM${ASM_DIALECT})
+endif()
+mark_as_advanced(CMAKE_ASM${ASM_DIALECT}_COMPILER)
+
+if (NOT _CMAKE_TOOLCHAIN_LOCATION)
+  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_ASM${ASM_DIALECT}_COMPILER}" PATH)
+endif ()
+
+
+if(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
+
+  # Table of per-vendor compiler id flags with expected output.
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS GNU )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_GNU "--version")
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_GNU "(GNU assembler)|(GCC)|(Free Software Foundation)")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS HP )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_HP "-V")
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_HP "HP C")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS Intel )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_Intel "--version")
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_Intel "(ICC)")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS SunPro )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_SunPro "-V")
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_SunPro "Sun C")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS XL )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_XL "-qversion")
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_XL "XL C")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS MSVC )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_MSVC "/?")
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_MSVC "Microsoft")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS TI )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_TI "-h")
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_TI "Texas Instruments")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS GNU IAR)
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_IAR )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_IAR "IAR Assembler")
+
+  list(APPEND CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDORS ARMCC)
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_ARMCC )
+  set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_ARMCC "(ARM Compiler)|(ARM Assembler)")
+
+  include(CMakeDetermineCompilerId)
+  CMAKE_DETERMINE_COMPILER_ID_VENDOR(ASM${ASM_DIALECT})
+
+endif()
+
+if(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
+  message(STATUS "The ASM${ASM_DIALECT} compiler identification is ${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}")
+else()
+  message(STATUS "The ASM${ASM_DIALECT} compiler identification is unknown")
+endif()
+
+
+
+# If we have a gas/as cross compiler, they have usually some prefix, like
+# e.g. powerpc-linux-gas, arm-elf-gas or i586-mingw32msvc-gas , optionally
+# with a 3-component version number at the end
+# The other tools of the toolchain usually have the same prefix
+# NAME_WE cannot be used since then this test will fail for names like
+# "arm-unknown-nto-qnx6.3.0-gas.exe", where BASENAME would be
+# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
+if (NOT _CMAKE_TOOLCHAIN_PREFIX)
+  get_filename_component(COMPILER_BASENAME "${CMAKE_ASM${ASM_DIALECT}_COMPILER}" NAME)
+  if (COMPILER_BASENAME MATCHES "^(.+-)g?as(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
+    set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+  endif ()
+endif ()
+
+# Now try the C compiler regexp:
+if (NOT _CMAKE_TOOLCHAIN_PREFIX)
+  if (COMPILER_BASENAME MATCHES "^(.+-)g?cc(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
+    set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+  endif ()
+endif ()
+
+# Finally try the CXX compiler regexp:
+if (NOT _CMAKE_TOOLCHAIN_PREFIX)
+  if (COMPILER_BASENAME MATCHES "^(.+-)[gc]\\+\\+(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
+    set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+  endif ()
+endif ()
+
+
+include(CMakeFindBinUtils)
+
+set(CMAKE_ASM${ASM_DIALECT}_COMPILER_ENV_VAR "ASM${ASM_DIALECT}")
+
+if(CMAKE_ASM${ASM_DIALECT}_COMPILER)
+  message(STATUS "Found assembler: ${CMAKE_ASM${ASM_DIALECT}_COMPILER}")
+else()
+  message(STATUS "Didn't find assembler")
+endif()
+
+
+set(_CMAKE_ASM_COMPILER "${CMAKE_ASM${ASM_DIALECT}_COMPILER}")
+set(_CMAKE_ASM_COMPILER_ID "${CMAKE_ASM${ASM_DIALECT}_COMPILER_ID}")
+set(_CMAKE_ASM_COMPILER_ARG1 "${CMAKE_ASM${ASM_DIALECT}_COMPILER_ARG1}")
+set(_CMAKE_ASM_COMPILER_ENV_VAR "${CMAKE_ASM${ASM_DIALECT}_COMPILER_ENV_VAR}")
+
+# configure variables set in this file for fast reload later on
+configure_file(${CMAKE_ROOT}/Modules/CMakeASMCompiler.cmake.in
+  ${CMAKE_PLATFORM_INFO_DIR}/CMakeASM${ASM_DIALECT}Compiler.cmake @ONLY)
+
+set(_CMAKE_ASM_COMPILER)
+set(_CMAKE_ASM_COMPILER_ARG1)
+set(_CMAKE_ASM_COMPILER_ENV_VAR)
diff --git a/share/cmake-3.2/Modules/CMakeDetermineASM_MASMCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineASM_MASMCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineASM_MASMCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineASM_MASMCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeDetermineASM_NASMCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineASM_NASMCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineASM_NASMCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineASM_NASMCompiler.cmake
diff --git a/share/cmake-3.6/Modules/CMakeDetermineCCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineCCompiler.cmake
new file mode 100644
index 0000000..f8c6303
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeDetermineCCompiler.cmake
@@ -0,0 +1,188 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# determine the compiler to use for C programs
+# NOTE, a generator may set CMAKE_C_COMPILER before
+# loading this file to force a compiler.
+# use environment variable CC first if defined by user, next use
+# the cmake variable CMAKE_GENERATOR_CC which can be defined by a generator
+# as a default compiler
+# If the internal cmake variable _CMAKE_TOOLCHAIN_PREFIX is set, this is used
+# as prefix for the tools (e.g. arm-elf-gcc, arm-elf-ar etc.). This works
+# currently with the GNU crosscompilers.
+#
+# Sets the following variables:
+#   CMAKE_C_COMPILER
+#   CMAKE_AR
+#   CMAKE_RANLIB
+#   CMAKE_COMPILER_IS_GNUCC
+#
+# If not already set before, it also sets
+#   _CMAKE_TOOLCHAIN_PREFIX
+
+include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
+
+# Load system-specific compiler preferences for this language.
+include(Platform/${CMAKE_SYSTEM_NAME}-C OPTIONAL)
+if(NOT CMAKE_C_COMPILER_NAMES)
+  set(CMAKE_C_COMPILER_NAMES cc)
+endif()
+
+if(${CMAKE_GENERATOR} MATCHES "Visual Studio")
+elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
+  set(CMAKE_C_COMPILER_XCODE_TYPE sourcecode.c.c)
+  _cmake_find_compiler_path(C)
+else()
+  if(NOT CMAKE_C_COMPILER)
+    set(CMAKE_C_COMPILER_INIT NOTFOUND)
+
+    # prefer the environment variable CC
+    if(NOT $ENV{CC} STREQUAL "")
+      get_filename_component(CMAKE_C_COMPILER_INIT $ENV{CC} PROGRAM PROGRAM_ARGS CMAKE_C_FLAGS_ENV_INIT)
+      if(CMAKE_C_FLAGS_ENV_INIT)
+        set(CMAKE_C_COMPILER_ARG1 "${CMAKE_C_FLAGS_ENV_INIT}" CACHE STRING "First argument to C compiler")
+      endif()
+      if(NOT EXISTS ${CMAKE_C_COMPILER_INIT})
+        message(FATAL_ERROR "Could not find compiler set in environment variable CC:\n$ENV{CC}.")
+      endif()
+    endif()
+
+    # next try prefer the compiler specified by the generator
+    if(CMAKE_GENERATOR_CC)
+      if(NOT CMAKE_C_COMPILER_INIT)
+        set(CMAKE_C_COMPILER_INIT ${CMAKE_GENERATOR_CC})
+      endif()
+    endif()
+
+    # finally list compilers to try
+    if(NOT CMAKE_C_COMPILER_INIT)
+      set(CMAKE_C_COMPILER_LIST ${_CMAKE_TOOLCHAIN_PREFIX}cc ${_CMAKE_TOOLCHAIN_PREFIX}gcc cl bcc xlc clang)
+    endif()
+
+    _cmake_find_compiler(C)
+
+  else()
+    _cmake_find_compiler_path(C)
+  endif()
+  mark_as_advanced(CMAKE_C_COMPILER)
+
+  # Each entry in this list is a set of extra flags to try
+  # adding to the compile line to see if it helps produce
+  # a valid identification file.
+  set(CMAKE_C_COMPILER_ID_TEST_FLAGS_FIRST)
+  set(CMAKE_C_COMPILER_ID_TEST_FLAGS
+    # Try compiling to an object file only.
+    "-c"
+
+    # Try enabling ANSI mode on HP.
+    "-Aa"
+
+    # Try compiling K&R-compatible code (needed by Bruce C Compiler).
+    "-D__CLASSIC_C__"
+    )
+endif()
+
+# Build a small source file to identify the compiler.
+if(NOT CMAKE_C_COMPILER_ID_RUN)
+  set(CMAKE_C_COMPILER_ID_RUN 1)
+
+  # Try to identify the compiler.
+  set(CMAKE_C_COMPILER_ID)
+  set(CMAKE_C_PLATFORM_ID)
+  file(READ ${CMAKE_ROOT}/Modules/CMakePlatformId.h.in
+    CMAKE_C_COMPILER_ID_PLATFORM_CONTENT)
+
+  # The IAR compiler produces weird output.
+  # See https://cmake.org/Bug/view.php?id=10176#c19598
+  list(APPEND CMAKE_C_COMPILER_ID_VENDORS IAR)
+  set(CMAKE_C_COMPILER_ID_VENDOR_FLAGS_IAR )
+  set(CMAKE_C_COMPILER_ID_VENDOR_REGEX_IAR "IAR .+ Compiler")
+
+  # Match the link line from xcodebuild output of the form
+  #  Ld ...
+  #      ...
+  #      /path/to/cc ...CompilerIdC/...
+  # to extract the compiler front-end for the language.
+  set(CMAKE_C_COMPILER_ID_TOOL_MATCH_REGEX "\nLd[^\n]*(\n[ \t]+[^\n]*)*\n[ \t]+([^ \t\r\n]+)[^\r\n]*-o[^\r\n]*CompilerIdC/(\\./)?(CompilerIdC.xctest/)?CompilerIdC[ \t\n\\\"]")
+  set(CMAKE_C_COMPILER_ID_TOOL_MATCH_INDEX 2)
+
+  include(${CMAKE_ROOT}/Modules/CMakeDetermineCompilerId.cmake)
+  CMAKE_DETERMINE_COMPILER_ID(C CFLAGS CMakeCCompilerId.c)
+
+  # Set old compiler and platform id variables.
+  if(CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    set(CMAKE_COMPILER_IS_GNUCC 1)
+  endif()
+  if(CMAKE_C_PLATFORM_ID MATCHES "MinGW")
+    set(CMAKE_COMPILER_IS_MINGW 1)
+  elseif(CMAKE_C_PLATFORM_ID MATCHES "Cygwin")
+    set(CMAKE_COMPILER_IS_CYGWIN 1)
+  endif()
+endif()
+
+if (NOT _CMAKE_TOOLCHAIN_LOCATION)
+  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_C_COMPILER}" PATH)
+endif ()
+
+# If we have a gcc cross compiler, they have usually some prefix, like
+# e.g. powerpc-linux-gcc, arm-elf-gcc or i586-mingw32msvc-gcc, optionally
+# with a 3-component version number at the end (e.g. arm-eabi-gcc-4.5.2).
+# The other tools of the toolchain usually have the same prefix
+# NAME_WE cannot be used since then this test will fail for names like
+# "arm-unknown-nto-qnx6.3.0-gcc.exe", where BASENAME would be
+# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
+if (CMAKE_CROSSCOMPILING  AND NOT _CMAKE_TOOLCHAIN_PREFIX)
+
+  if(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_C_COMPILER_ID MATCHES "Clang")
+    get_filename_component(COMPILER_BASENAME "${CMAKE_C_COMPILER}" NAME)
+    if (COMPILER_BASENAME MATCHES "^(.+-)(clang|g?cc)(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
+      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+    elseif(CMAKE_C_COMPILER_ID MATCHES "Clang")
+      if(CMAKE_C_COMPILER_TARGET)
+        set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_C_COMPILER_TARGET}-)
+      endif()
+    elseif(COMPILER_BASENAME MATCHES "qcc(\\.exe)?$")
+      if(CMAKE_C_COMPILER_TARGET MATCHES "gcc_nto([^_le]+)(le)?")
+        set(_CMAKE_TOOLCHAIN_PREFIX nto${CMAKE_MATCH_1}-)
+      endif()
+    endif ()
+
+    # if "llvm-" is part of the prefix, remove it, since llvm doesn't have its own binutils
+    # but uses the regular ar, objcopy, etc. (instead of llvm-objcopy etc.)
+    if ("${_CMAKE_TOOLCHAIN_PREFIX}" MATCHES "(.+-)?llvm-$")
+      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+    endif ()
+  elseif(CMAKE_C_COMPILER_ID MATCHES "TI")
+    # TI compilers are named e.g. cl6x, cl470 or armcl.exe
+    get_filename_component(COMPILER_BASENAME "${CMAKE_C_COMPILER}" NAME)
+    if (COMPILER_BASENAME MATCHES "^(.+)?cl([^.]+)?(\\.exe)?$")
+      set(_CMAKE_TOOLCHAIN_PREFIX "${CMAKE_MATCH_1}")
+      set(_CMAKE_TOOLCHAIN_SUFFIX "${CMAKE_MATCH_2}")
+    endif ()
+  endif()
+
+endif ()
+
+include(CMakeFindBinUtils)
+if(MSVC_C_ARCHITECTURE_ID)
+  set(SET_MSVC_C_ARCHITECTURE_ID
+    "set(MSVC_C_ARCHITECTURE_ID ${MSVC_C_ARCHITECTURE_ID})")
+endif()
+
+# configure variables set in this file for fast reload later on
+configure_file(${CMAKE_ROOT}/Modules/CMakeCCompiler.cmake.in
+  ${CMAKE_PLATFORM_INFO_DIR}/CMakeCCompiler.cmake
+  @ONLY
+  )
+set(CMAKE_C_COMPILER_ENV_VAR "CC")
diff --git a/share/cmake-3.6/Modules/CMakeDetermineCXXCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineCXXCompiler.cmake
new file mode 100644
index 0000000..3c9bbc2
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeDetermineCXXCompiler.cmake
@@ -0,0 +1,184 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# determine the compiler to use for C++ programs
+# NOTE, a generator may set CMAKE_CXX_COMPILER before
+# loading this file to force a compiler.
+# use environment variable CXX first if defined by user, next use
+# the cmake variable CMAKE_GENERATOR_CXX which can be defined by a generator
+# as a default compiler
+# If the internal cmake variable _CMAKE_TOOLCHAIN_PREFIX is set, this is used
+# as prefix for the tools (e.g. arm-elf-g++, arm-elf-ar etc.)
+#
+# Sets the following variables:
+#   CMAKE_CXX_COMPILER
+#   CMAKE_COMPILER_IS_GNUCXX
+#   CMAKE_AR
+#   CMAKE_RANLIB
+#
+# If not already set before, it also sets
+#   _CMAKE_TOOLCHAIN_PREFIX
+
+include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
+
+# Load system-specific compiler preferences for this language.
+include(Platform/${CMAKE_SYSTEM_NAME}-CXX OPTIONAL)
+if(NOT CMAKE_CXX_COMPILER_NAMES)
+  set(CMAKE_CXX_COMPILER_NAMES CC)
+endif()
+
+if(${CMAKE_GENERATOR} MATCHES "Visual Studio")
+elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
+  set(CMAKE_CXX_COMPILER_XCODE_TYPE sourcecode.cpp.cpp)
+  _cmake_find_compiler_path(CXX)
+else()
+  if(NOT CMAKE_CXX_COMPILER)
+    set(CMAKE_CXX_COMPILER_INIT NOTFOUND)
+
+    # prefer the environment variable CXX
+    if(NOT $ENV{CXX} STREQUAL "")
+      get_filename_component(CMAKE_CXX_COMPILER_INIT $ENV{CXX} PROGRAM PROGRAM_ARGS CMAKE_CXX_FLAGS_ENV_INIT)
+      if(CMAKE_CXX_FLAGS_ENV_INIT)
+        set(CMAKE_CXX_COMPILER_ARG1 "${CMAKE_CXX_FLAGS_ENV_INIT}" CACHE STRING "First argument to CXX compiler")
+      endif()
+      if(NOT EXISTS ${CMAKE_CXX_COMPILER_INIT})
+        message(FATAL_ERROR "Could not find compiler set in environment variable CXX:\n$ENV{CXX}.\n${CMAKE_CXX_COMPILER_INIT}")
+      endif()
+    endif()
+
+    # next prefer the generator specified compiler
+    if(CMAKE_GENERATOR_CXX)
+      if(NOT CMAKE_CXX_COMPILER_INIT)
+        set(CMAKE_CXX_COMPILER_INIT ${CMAKE_GENERATOR_CXX})
+      endif()
+    endif()
+
+    # finally list compilers to try
+    if(NOT CMAKE_CXX_COMPILER_INIT)
+      set(CMAKE_CXX_COMPILER_LIST CC ${_CMAKE_TOOLCHAIN_PREFIX}c++ ${_CMAKE_TOOLCHAIN_PREFIX}g++ aCC cl bcc xlC clang++)
+    endif()
+
+    _cmake_find_compiler(CXX)
+  else()
+    _cmake_find_compiler_path(CXX)
+  endif()
+  mark_as_advanced(CMAKE_CXX_COMPILER)
+
+  # Each entry in this list is a set of extra flags to try
+  # adding to the compile line to see if it helps produce
+  # a valid identification file.
+  set(CMAKE_CXX_COMPILER_ID_TEST_FLAGS_FIRST)
+  set(CMAKE_CXX_COMPILER_ID_TEST_FLAGS
+    # Try compiling to an object file only.
+    "-c"
+    )
+endif()
+
+# Build a small source file to identify the compiler.
+if(NOT CMAKE_CXX_COMPILER_ID_RUN)
+  set(CMAKE_CXX_COMPILER_ID_RUN 1)
+
+  # Try to identify the compiler.
+  set(CMAKE_CXX_COMPILER_ID)
+  set(CMAKE_CXX_PLATFORM_ID)
+  file(READ ${CMAKE_ROOT}/Modules/CMakePlatformId.h.in
+    CMAKE_CXX_COMPILER_ID_PLATFORM_CONTENT)
+
+  # The IAR compiler produces weird output.
+  # See https://cmake.org/Bug/view.php?id=10176#c19598
+  list(APPEND CMAKE_CXX_COMPILER_ID_VENDORS IAR)
+  set(CMAKE_CXX_COMPILER_ID_VENDOR_FLAGS_IAR )
+  set(CMAKE_CXX_COMPILER_ID_VENDOR_REGEX_IAR "IAR .+ Compiler")
+
+  # Match the link line from xcodebuild output of the form
+  #  Ld ...
+  #      ...
+  #      /path/to/cc ...CompilerIdCXX/...
+  # to extract the compiler front-end for the language.
+  set(CMAKE_CXX_COMPILER_ID_TOOL_MATCH_REGEX "\nLd[^\n]*(\n[ \t]+[^\n]*)*\n[ \t]+([^ \t\r\n]+)[^\r\n]*-o[^\r\n]*CompilerIdCXX/(\\./)?(CompilerIdCXX.xctest/)?CompilerIdCXX[ \t\n\\\"]")
+  set(CMAKE_CXX_COMPILER_ID_TOOL_MATCH_INDEX 2)
+
+  include(${CMAKE_ROOT}/Modules/CMakeDetermineCompilerId.cmake)
+  CMAKE_DETERMINE_COMPILER_ID(CXX CXXFLAGS CMakeCXXCompilerId.cpp)
+
+  # Set old compiler and platform id variables.
+  if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
+    set(CMAKE_COMPILER_IS_GNUCXX 1)
+  endif()
+  if(CMAKE_CXX_PLATFORM_ID MATCHES "MinGW")
+    set(CMAKE_COMPILER_IS_MINGW 1)
+  elseif(CMAKE_CXX_PLATFORM_ID MATCHES "Cygwin")
+    set(CMAKE_COMPILER_IS_CYGWIN 1)
+  endif()
+endif()
+
+if (NOT _CMAKE_TOOLCHAIN_LOCATION)
+  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_CXX_COMPILER}" PATH)
+endif ()
+
+# if we have a g++ cross compiler, they have usually some prefix, like
+# e.g. powerpc-linux-g++, arm-elf-g++ or i586-mingw32msvc-g++ , optionally
+# with a 3-component version number at the end (e.g. arm-eabi-gcc-4.5.2).
+# The other tools of the toolchain usually have the same prefix
+# NAME_WE cannot be used since then this test will fail for names like
+# "arm-unknown-nto-qnx6.3.0-gcc.exe", where BASENAME would be
+# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
+
+
+if (CMAKE_CROSSCOMPILING  AND NOT  _CMAKE_TOOLCHAIN_PREFIX)
+
+  if("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU" OR "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
+    get_filename_component(COMPILER_BASENAME "${CMAKE_CXX_COMPILER}" NAME)
+    if (COMPILER_BASENAME MATCHES "^(.+-)(clan)?[gc]\\+\\+(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
+      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+    elseif("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
+      if(CMAKE_CXX_COMPILER_TARGET)
+        set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_CXX_COMPILER_TARGET}-)
+      endif()
+    elseif(COMPILER_BASENAME MATCHES "QCC(\\.exe)?$")
+      if(CMAKE_CXX_COMPILER_TARGET MATCHES "gcc_nto([^_le]+)(le)?")
+        set(_CMAKE_TOOLCHAIN_PREFIX nto${CMAKE_MATCH_1}-)
+      endif()
+    endif ()
+
+    # if "llvm-" is part of the prefix, remove it, since llvm doesn't have its own binutils
+    # but uses the regular ar, objcopy, etc. (instead of llvm-objcopy etc.)
+    if ("${_CMAKE_TOOLCHAIN_PREFIX}" MATCHES "(.+-)?llvm-$")
+      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+    endif ()
+  elseif("${CMAKE_CXX_COMPILER_ID}" MATCHES "TI")
+    # TI compilers are named e.g. cl6x, cl470 or armcl.exe
+    get_filename_component(COMPILER_BASENAME "${CMAKE_CXX_COMPILER}" NAME)
+    if (COMPILER_BASENAME MATCHES "^(.+)?cl([^.]+)?(\\.exe)?$")
+      set(_CMAKE_TOOLCHAIN_PREFIX "${CMAKE_MATCH_1}")
+      set(_CMAKE_TOOLCHAIN_SUFFIX "${CMAKE_MATCH_2}")
+    endif ()
+
+  endif()
+
+endif ()
+
+include(CMakeFindBinUtils)
+if(MSVC_CXX_ARCHITECTURE_ID)
+  set(SET_MSVC_CXX_ARCHITECTURE_ID
+    "set(MSVC_CXX_ARCHITECTURE_ID ${MSVC_CXX_ARCHITECTURE_ID})")
+endif()
+
+# configure all variables set in this file
+configure_file(${CMAKE_ROOT}/Modules/CMakeCXXCompiler.cmake.in
+  ${CMAKE_PLATFORM_INFO_DIR}/CMakeCXXCompiler.cmake
+  @ONLY
+  )
+
+set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
diff --git a/share/cmake-3.2/Modules/CMakeDetermineCompileFeatures.cmake b/share/cmake-3.6/Modules/CMakeDetermineCompileFeatures.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineCompileFeatures.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineCompileFeatures.cmake
diff --git a/share/cmake-3.2/Modules/CMakeDetermineCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeDetermineCompilerABI.cmake b/share/cmake-3.6/Modules/CMakeDetermineCompilerABI.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineCompilerABI.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineCompilerABI.cmake
diff --git a/share/cmake-3.6/Modules/CMakeDetermineCompilerId.cmake b/share/cmake-3.6/Modules/CMakeDetermineCompilerId.cmake
new file mode 100644
index 0000000..465989d
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeDetermineCompilerId.cmake
@@ -0,0 +1,672 @@
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Function to compile a source file to identify the compiler.  This is
+# used internally by CMake and should not be included by user code.
+# If successful, sets CMAKE_<lang>_COMPILER_ID and CMAKE_<lang>_PLATFORM_ID
+
+function(CMAKE_DETERMINE_COMPILER_ID lang flagvar src)
+  # Make sure the compiler arguments are clean.
+  string(STRIP "${CMAKE_${lang}_COMPILER_ARG1}" CMAKE_${lang}_COMPILER_ID_ARG1)
+  string(REGEX REPLACE " +" ";" CMAKE_${lang}_COMPILER_ID_ARG1 "${CMAKE_${lang}_COMPILER_ID_ARG1}")
+
+  # Make sure user-specified compiler flags are used.
+  if(CMAKE_${lang}_FLAGS)
+    set(CMAKE_${lang}_COMPILER_ID_FLAGS ${CMAKE_${lang}_FLAGS})
+  else()
+    set(CMAKE_${lang}_COMPILER_ID_FLAGS $ENV{${flagvar}})
+  endif()
+  string(REPLACE " " ";" CMAKE_${lang}_COMPILER_ID_FLAGS_LIST "${CMAKE_${lang}_COMPILER_ID_FLAGS}")
+
+  # Compute the directory in which to run the test.
+  set(CMAKE_${lang}_COMPILER_ID_DIR ${CMAKE_PLATFORM_INFO_DIR}/CompilerId${lang})
+
+  # Try building with no extra flags and then try each set
+  # of helper flags.  Stop when the compiler is identified.
+  foreach(flags ${CMAKE_${lang}_COMPILER_ID_TEST_FLAGS_FIRST}
+                ""
+                ${CMAKE_${lang}_COMPILER_ID_TEST_FLAGS})
+    CMAKE_DETERMINE_COMPILER_ID_BUILD("${lang}" "${flags}" "${src}")
+    CMAKE_DETERMINE_COMPILER_ID_MATCH_VENDOR("${lang}" "${COMPILER_${lang}_PRODUCED_OUTPUT}")
+    if(CMAKE_${lang}_COMPILER_ID)
+      break()
+    endif()
+    foreach(file ${COMPILER_${lang}_PRODUCED_FILES})
+      CMAKE_DETERMINE_COMPILER_ID_CHECK("${lang}" "${CMAKE_${lang}_COMPILER_ID_DIR}/${file}" "${src}")
+    endforeach()
+    if(CMAKE_${lang}_COMPILER_ID)
+      break()
+    endif()
+  endforeach()
+
+  # If the compiler is still unknown, try to query its vendor.
+  if(CMAKE_${lang}_COMPILER AND NOT CMAKE_${lang}_COMPILER_ID)
+    CMAKE_DETERMINE_COMPILER_ID_VENDOR(${lang})
+  endif()
+
+  if (COMPILER_QNXNTO AND CMAKE_${lang}_COMPILER_ID STREQUAL "GNU")
+    execute_process(
+      COMMAND "${CMAKE_${lang}_COMPILER}"
+      -V
+      OUTPUT_VARIABLE output ERROR_VARIABLE output
+      RESULT_VARIABLE result
+      TIMEOUT 10
+      )
+    if (output MATCHES "targets available")
+      set(CMAKE_${lang}_COMPILER_ID QCC)
+      # http://community.qnx.com/sf/discussion/do/listPosts/projects.community/discussion.qnx_momentics_community_support.topc3555?_pagenum=2
+      # The qcc driver does not itself have a version.
+    endif()
+  endif()
+
+  # if the format is unknown after all files have been checked, put "Unknown" in the cache
+  if(NOT CMAKE_EXECUTABLE_FORMAT)
+    set(CMAKE_EXECUTABLE_FORMAT "Unknown" CACHE INTERNAL "Executable file format")
+  endif()
+
+  if(CMAKE_GENERATOR STREQUAL "Ninja" AND MSVC_${lang}_ARCHITECTURE_ID)
+    CMAKE_DETERMINE_MSVC_SHOWINCLUDES_PREFIX(${lang})
+  else()
+    set(CMAKE_${lang}_CL_SHOWINCLUDES_PREFIX "")
+  endif()
+
+  # Display the final identification result.
+  if(CMAKE_${lang}_COMPILER_ID)
+    if(CMAKE_${lang}_COMPILER_VERSION)
+      set(_version " ${CMAKE_${lang}_COMPILER_VERSION}")
+    else()
+      set(_version "")
+    endif()
+    message(STATUS "The ${lang} compiler identification is "
+      "${CMAKE_${lang}_COMPILER_ID}${_version}")
+  else()
+    message(STATUS "The ${lang} compiler identification is unknown")
+  endif()
+
+  # Check if compiler id detection gave us the compiler tool.
+  if(CMAKE_${lang}_COMPILER_ID_TOOL)
+    set(CMAKE_${lang}_COMPILER "${CMAKE_${lang}_COMPILER_ID_TOOL}" PARENT_SCOPE)
+  elseif(NOT CMAKE_${lang}_COMPILER)
+    set(CMAKE_${lang}_COMPILER "CMAKE_${lang}_COMPILER-NOTFOUND" PARENT_SCOPE)
+  endif()
+
+  set(CMAKE_${lang}_COMPILER_ID "${CMAKE_${lang}_COMPILER_ID}" PARENT_SCOPE)
+  set(CMAKE_${lang}_PLATFORM_ID "${CMAKE_${lang}_PLATFORM_ID}" PARENT_SCOPE)
+  set(MSVC_${lang}_ARCHITECTURE_ID "${MSVC_${lang}_ARCHITECTURE_ID}"
+    PARENT_SCOPE)
+  set(CMAKE_${lang}_CL_SHOWINCLUDES_PREFIX "${CMAKE_${lang}_CL_SHOWINCLUDES_PREFIX}" PARENT_SCOPE)
+  set(CMAKE_${lang}_COMPILER_VERSION "${CMAKE_${lang}_COMPILER_VERSION}" PARENT_SCOPE)
+  set(CMAKE_${lang}_COMPILER_WRAPPER "${CMAKE_${lang}_COMPILER_WRAPPER}" PARENT_SCOPE)
+  set(CMAKE_${lang}_SIMULATE_ID "${CMAKE_${lang}_SIMULATE_ID}" PARENT_SCOPE)
+  set(CMAKE_${lang}_SIMULATE_VERSION "${CMAKE_${lang}_SIMULATE_VERSION}" PARENT_SCOPE)
+  set(CMAKE_${lang}_STANDARD_COMPUTED_DEFAULT "${CMAKE_${lang}_STANDARD_COMPUTED_DEFAULT}" PARENT_SCOPE)
+endfunction()
+
+include(CMakeCompilerIdDetection)
+
+#-----------------------------------------------------------------------------
+# Function to write the compiler id source file.
+function(CMAKE_DETERMINE_COMPILER_ID_WRITE lang src)
+  find_file(src_in ${src}.in PATHS ${CMAKE_ROOT}/Modules ${CMAKE_MODULE_PATH} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+  file(READ ${src_in} ID_CONTENT_IN)
+
+  compiler_id_detection(CMAKE_${lang}_COMPILER_ID_CONTENT ${lang}
+    ID_STRING
+    VERSION_STRINGS
+    PLATFORM_DEFAULT_COMPILER
+  )
+
+  unset(src_in CACHE)
+  string(CONFIGURE "${ID_CONTENT_IN}" ID_CONTENT_OUT @ONLY)
+  file(WRITE ${CMAKE_${lang}_COMPILER_ID_DIR}/${src} "${ID_CONTENT_OUT}")
+endfunction()
+
+#-----------------------------------------------------------------------------
+# Function to build the compiler id source file and look for output
+# files.
+function(CMAKE_DETERMINE_COMPILER_ID_BUILD lang testflags src)
+  # Create a clean working directory.
+  file(REMOVE_RECURSE ${CMAKE_${lang}_COMPILER_ID_DIR})
+  file(MAKE_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR})
+  CMAKE_DETERMINE_COMPILER_ID_WRITE("${lang}" "${src}")
+
+  # Construct a description of this test case.
+  set(COMPILER_DESCRIPTION
+    "Compiler: ${CMAKE_${lang}_COMPILER} ${CMAKE_${lang}_COMPILER_ID_ARG1}
+Build flags: ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
+Id flags: ${testflags}
+")
+
+  # Compile the compiler identification source.
+  if("${CMAKE_GENERATOR}" MATCHES "Visual Studio ([0-9]+)")
+    set(vs_version ${CMAKE_MATCH_1})
+    set(id_platform ${CMAKE_VS_PLATFORM_NAME})
+    set(id_lang "${lang}")
+    if(CMAKE_VS_PLATFORM_TOOLSET MATCHES "v[0-9]+_clang_.*")
+      set(id_cl clang.exe)
+    else()
+      set(id_cl cl.exe)
+    endif()
+    if(CMAKE_VS_PLATFORM_NAME STREQUAL "Tegra-Android")
+      set(v NsightTegra)
+      set(ext vcxproj)
+      if(lang STREQUAL CXX)
+        set(id_gcc g++)
+        set(id_clang clang++)
+      else()
+        set(id_gcc gcc)
+        set(id_clang clang)
+      endif()
+    elseif(lang STREQUAL Fortran)
+      set(v Intel)
+      set(ext vfproj)
+      set(id_cl ifort.exe)
+    elseif(NOT "${vs_version}" VERSION_LESS 10)
+      set(v 10)
+      set(ext vcxproj)
+    else()
+      set(id_version ${vs_version}.00)
+      set(v 7)
+      set(ext vcproj)
+    endif()
+    if(CMAKE_VS_PLATFORM_TOOLSET)
+      if(CMAKE_VS_PLATFORM_NAME STREQUAL "Tegra-Android")
+        set(id_toolset "<NdkToolchainVersion>${CMAKE_VS_PLATFORM_TOOLSET}</NdkToolchainVersion>")
+      else()
+        set(id_toolset "<PlatformToolset>${CMAKE_VS_PLATFORM_TOOLSET}</PlatformToolset>")
+        if(CMAKE_VS_PLATFORM_TOOLSET MATCHES "Intel")
+          set(id_cl icl.exe)
+        endif()
+      endif()
+    else()
+      set(id_toolset "")
+    endif()
+    if(CMAKE_SYSTEM_NAME STREQUAL "WindowsPhone")
+      set(id_system "<ApplicationType>Windows Phone</ApplicationType>")
+    elseif(CMAKE_SYSTEM_NAME STREQUAL "WindowsStore")
+      set(id_system "<ApplicationType>Windows Store</ApplicationType>")
+    else()
+      set(id_system "")
+    endif()
+    if(id_system AND CMAKE_SYSTEM_VERSION)
+      set(id_system_version "<ApplicationTypeRevision>${CMAKE_SYSTEM_VERSION}</ApplicationTypeRevision>")
+    else()
+      set(id_system_version "")
+    endif()
+    if(CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION)
+      set(id_WindowsTargetPlatformVersion "<WindowsTargetPlatformVersion>${CMAKE_VS_WINDOWS_TARGET_PLATFORM_VERSION}</WindowsTargetPlatformVersion>")
+    endif()
+    if(id_platform STREQUAL ARM)
+      set(id_WindowsSDKDesktopARMSupport "<WindowsSDKDesktopARMSupport>true</WindowsSDKDesktopARMSupport>")
+    else()
+      set(id_WindowsSDKDesktopARMSupport "")
+    endif()
+    if(CMAKE_VS_WINCE_VERSION)
+      set(id_entrypoint "mainACRTStartup")
+      if("${vs_version}" VERSION_LESS 9)
+        set(id_subsystem 9)
+      else()
+        set(id_subsystem 8)
+      endif()
+    else()
+      set(id_subsystem 1)
+    endif()
+    set(id_dir ${CMAKE_${lang}_COMPILER_ID_DIR})
+    set(id_src "${src}")
+    configure_file(${CMAKE_ROOT}/Modules/CompilerId/VS-${v}.${ext}.in
+      ${id_dir}/CompilerId${lang}.${ext} @ONLY)
+    if(CMAKE_VS_MSBUILD_COMMAND AND NOT lang STREQUAL "Fortran")
+      set(command "${CMAKE_VS_MSBUILD_COMMAND}" "CompilerId${lang}.${ext}"
+        "/p:Configuration=Debug" "/p:Platform=${id_platform}" "/p:VisualStudioVersion=${vs_version}.0"
+        )
+    elseif(CMAKE_VS_DEVENV_COMMAND)
+      set(command "${CMAKE_VS_DEVENV_COMMAND}" "CompilerId${lang}.${ext}" "/build" "Debug")
+    else()
+      set(command "")
+    endif()
+    if(command)
+      execute_process(
+        COMMAND ${command}
+        WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
+        OUTPUT_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
+        ERROR_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
+        RESULT_VARIABLE CMAKE_${lang}_COMPILER_ID_RESULT
+        )
+    else()
+      set(CMAKE_${lang}_COMPILER_ID_RESULT 1)
+      set(CMAKE_${lang}_COMPILER_ID_OUTPUT "VS environment not known to support ${lang}")
+    endif()
+    # Match the compiler location line printed out.
+    if("${CMAKE_${lang}_COMPILER_ID_OUTPUT}" MATCHES "CMAKE_${lang}_COMPILER=([^%\r\n]+)[\r\n]")
+      # Strip VS diagnostic output from the end of the line.
+      string(REGEX REPLACE " \\(TaskId:[0-9]*\\)$" "" _comp "${CMAKE_MATCH_1}")
+      if(EXISTS "${_comp}")
+        file(TO_CMAKE_PATH "${_comp}" _comp)
+        set(CMAKE_${lang}_COMPILER_ID_TOOL "${_comp}" PARENT_SCOPE)
+      endif()
+    endif()
+  elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
+    set(id_lang "${lang}")
+    set(id_type ${CMAKE_${lang}_COMPILER_XCODE_TYPE})
+    set(id_dir ${CMAKE_${lang}_COMPILER_ID_DIR})
+    set(id_src "${src}")
+    if(CMAKE_XCODE_PLATFORM_TOOLSET)
+      set(id_toolset "GCC_VERSION = ${CMAKE_XCODE_PLATFORM_TOOLSET};")
+    else()
+      set(id_toolset "")
+    endif()
+    if(CMAKE_OSX_DEPLOYMENT_TARGET)
+      set(id_deployment_target
+        "MACOSX_DEPLOYMENT_TARGET = \"${CMAKE_OSX_DEPLOYMENT_TARGET}\";")
+    else()
+      set(id_deployment_target "")
+    endif()
+    set(id_product_type "com.apple.product-type.tool")
+    if(CMAKE_OSX_SYSROOT)
+      set(id_sdkroot "SDKROOT = \"${CMAKE_OSX_SYSROOT}\";")
+      if(CMAKE_OSX_SYSROOT MATCHES "(^|/)[Ii][Pp][Hh][Oo][Nn][Ee]")
+        set(id_product_type "com.apple.product-type.bundle.unit-test")
+      endif()
+    else()
+      set(id_sdkroot "")
+    endif()
+    if(NOT ${XCODE_VERSION} VERSION_LESS 3)
+      set(v 3)
+      set(ext xcodeproj)
+    elseif(NOT ${XCODE_VERSION} VERSION_LESS 2)
+      set(v 2)
+      set(ext xcodeproj)
+    else()
+      set(v 1)
+      set(ext xcode)
+    endif()
+    configure_file(${CMAKE_ROOT}/Modules/CompilerId/Xcode-${v}.pbxproj.in
+      ${id_dir}/CompilerId${lang}.${ext}/project.pbxproj @ONLY)
+    unset(_ENV_MACOSX_DEPLOYMENT_TARGET)
+    if(DEFINED ENV{MACOSX_DEPLOYMENT_TARGET})
+      set(_ENV_MACOSX_DEPLOYMENT_TARGET "$ENV{MACOSX_DEPLOYMENT_TARGET}")
+      set(ENV{MACOSX_DEPLOYMENT_TARGET} "")
+    endif()
+    execute_process(COMMAND xcodebuild
+      WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
+      OUTPUT_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
+      ERROR_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
+      RESULT_VARIABLE CMAKE_${lang}_COMPILER_ID_RESULT
+      )
+    if(DEFINED _ENV_MACOSX_DEPLOYMENT_TARGET)
+      set(ENV{MACOSX_DEPLOYMENT_TARGET} "${_ENV_MACOSX_DEPLOYMENT_TARGET}")
+    endif()
+
+    if(DEFINED CMAKE_${lang}_COMPILER_ID_TOOL_MATCH_REGEX)
+      if("${CMAKE_${lang}_COMPILER_ID_OUTPUT}" MATCHES "${CMAKE_${lang}_COMPILER_ID_TOOL_MATCH_REGEX}")
+        set(_comp "${CMAKE_MATCH_${CMAKE_${lang}_COMPILER_ID_TOOL_MATCH_INDEX}}")
+        if(EXISTS "${_comp}")
+          set(CMAKE_${lang}_COMPILER_ID_TOOL "${_comp}" PARENT_SCOPE)
+        endif()
+      endif()
+    endif()
+  else()
+    execute_process(
+      COMMAND "${CMAKE_${lang}_COMPILER}"
+              ${CMAKE_${lang}_COMPILER_ID_ARG1}
+              ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
+              ${testflags}
+              "${src}"
+      WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
+      OUTPUT_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
+      ERROR_VARIABLE CMAKE_${lang}_COMPILER_ID_OUTPUT
+      RESULT_VARIABLE CMAKE_${lang}_COMPILER_ID_RESULT
+      )
+  endif()
+
+  # Check the result of compilation.
+  if(CMAKE_${lang}_COMPILER_ID_RESULT
+     # Intel Fortran warns and ignores preprocessor lines without /fpp
+     OR CMAKE_${lang}_COMPILER_ID_OUTPUT MATCHES "Bad # preprocessor line"
+     )
+    # Compilation failed.
+    set(MSG
+      "Compiling the ${lang} compiler identification source file \"${src}\" failed.
+${COMPILER_DESCRIPTION}
+The output was:
+${CMAKE_${lang}_COMPILER_ID_RESULT}
+${CMAKE_${lang}_COMPILER_ID_OUTPUT}
+
+")
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "${MSG}")
+    #if(NOT CMAKE_${lang}_COMPILER_ID_ALLOW_FAIL)
+    #  message(FATAL_ERROR "${MSG}")
+    #endif()
+
+    # No output files should be inspected.
+    set(COMPILER_${lang}_PRODUCED_FILES)
+    set(COMPILER_${lang}_PRODUCED_OUTPUT)
+  else()
+    # Compilation succeeded.
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+      "Compiling the ${lang} compiler identification source file \"${src}\" succeeded.
+${COMPILER_DESCRIPTION}
+The output was:
+${CMAKE_${lang}_COMPILER_ID_RESULT}
+${CMAKE_${lang}_COMPILER_ID_OUTPUT}
+
+")
+
+    # Find the executable produced by the compiler, try all files in the
+    # binary dir.
+    file(GLOB files
+      RELATIVE ${CMAKE_${lang}_COMPILER_ID_DIR}
+
+      # normal case
+      ${CMAKE_${lang}_COMPILER_ID_DIR}/*
+
+      # com.apple.package-type.bundle.unit-test
+      ${CMAKE_${lang}_COMPILER_ID_DIR}/*.xctest/*
+      )
+    list(REMOVE_ITEM files "${src}")
+    set(COMPILER_${lang}_PRODUCED_FILES "")
+    foreach(file ${files})
+      if(NOT IS_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}/${file})
+        list(APPEND COMPILER_${lang}_PRODUCED_FILES ${file})
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+          "Compilation of the ${lang} compiler identification source \""
+          "${src}\" produced \"${file}\"\n\n")
+      endif()
+    endforeach()
+
+    if(NOT COMPILER_${lang}_PRODUCED_FILES)
+      # No executable was found.
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Compilation of the ${lang} compiler identification source \""
+        "${src}\" did not produce an executable in \""
+        "${CMAKE_${lang}_COMPILER_ID_DIR}\".\n\n")
+    endif()
+
+    set(COMPILER_${lang}_PRODUCED_OUTPUT "${CMAKE_${lang}_COMPILER_ID_OUTPUT}")
+  endif()
+
+  # Return the files produced by the compilation.
+  set(COMPILER_${lang}_PRODUCED_FILES "${COMPILER_${lang}_PRODUCED_FILES}" PARENT_SCOPE)
+  set(COMPILER_${lang}_PRODUCED_OUTPUT "${COMPILER_${lang}_PRODUCED_OUTPUT}" PARENT_SCOPE)
+endfunction()
+
+#-----------------------------------------------------------------------------
+# Function to extract the compiler id from compiler output.
+function(CMAKE_DETERMINE_COMPILER_ID_MATCH_VENDOR lang output)
+  foreach(vendor ${CMAKE_${lang}_COMPILER_ID_MATCH_VENDORS})
+    if(output MATCHES "${CMAKE_${lang}_COMPILER_ID_MATCH_VENDOR_REGEX_${vendor}}")
+      set(CMAKE_${lang}_COMPILER_ID "${vendor}")
+    endif()
+  endforeach()
+  set(CMAKE_${lang}_COMPILER_ID "${CMAKE_${lang}_COMPILER_ID}" PARENT_SCOPE)
+endfunction()
+
+#-----------------------------------------------------------------------------
+# Function to extract the compiler id from an executable.
+function(CMAKE_DETERMINE_COMPILER_ID_CHECK lang file)
+  # Look for a compiler id if not yet known.
+  if(NOT CMAKE_${lang}_COMPILER_ID)
+    # Read the compiler identification string from the executable file.
+    set(COMPILER_ID)
+    set(COMPILER_VERSION)
+    set(COMPILER_VERSION_MAJOR 0)
+    set(COMPILER_VERSION_MINOR 0)
+    set(COMPILER_VERSION_PATCH 0)
+    set(COMPILER_VERSION_TWEAK 0)
+    set(HAVE_COMPILER_VERSION_MAJOR 0)
+    set(HAVE_COMPILER_VERSION_MINOR 0)
+    set(HAVE_COMPILER_VERSION_PATCH 0)
+    set(HAVE_COMPILER_VERSION_TWEAK 0)
+    set(COMPILER_WRAPPER)
+    set(DIGIT_VALUE_1 1)
+    set(DIGIT_VALUE_2 10)
+    set(DIGIT_VALUE_3 100)
+    set(DIGIT_VALUE_4 1000)
+    set(DIGIT_VALUE_5 10000)
+    set(DIGIT_VALUE_6 100000)
+    set(DIGIT_VALUE_7 1000000)
+    set(DIGIT_VALUE_8 10000000)
+    set(PLATFORM_ID)
+    set(ARCHITECTURE_ID)
+    set(SIMULATE_ID)
+    set(SIMULATE_VERSION)
+    file(STRINGS ${file}
+      CMAKE_${lang}_COMPILER_ID_STRINGS LIMIT_COUNT 38 REGEX "INFO:[A-Za-z0-9_]+\\[[^]]*\\]")
+    set(COMPILER_ID_TWICE)
+    foreach(info ${CMAKE_${lang}_COMPILER_ID_STRINGS})
+      if("${info}" MATCHES "INFO:compiler\\[([^]\"]*)\\]")
+        if(COMPILER_ID)
+          set(COMPILER_ID_TWICE 1)
+        endif()
+        set(COMPILER_ID "${CMAKE_MATCH_1}")
+      endif()
+      if("${info}" MATCHES "INFO:platform\\[([^]\"]*)\\]")
+        set(PLATFORM_ID "${CMAKE_MATCH_1}")
+      endif()
+      if("${info}" MATCHES "INFO:arch\\[([^]\"]*)\\]")
+        set(ARCHITECTURE_ID "${CMAKE_MATCH_1}")
+      endif()
+      if("${info}" MATCHES "INFO:compiler_version\\[([^]\"]*)\\]")
+        string(REGEX REPLACE "^0+([0-9])" "\\1" COMPILER_VERSION "${CMAKE_MATCH_1}")
+        string(REGEX REPLACE "\\.0+([0-9])" ".\\1" COMPILER_VERSION "${COMPILER_VERSION}")
+      endif()
+      foreach(comp MAJOR MINOR PATCH TWEAK)
+        foreach(digit 1 2 3 4 5 6 7 8 9)
+          if("${info}" MATCHES "INFO:compiler_version_${comp}_digit_${digit}\\[([0-9])\\]")
+            set(value ${CMAKE_MATCH_1})
+            math(EXPR COMPILER_VERSION_${comp} "${COMPILER_VERSION_${comp}} + ${value} * ${DIGIT_VALUE_${digit}}")
+            set(HAVE_COMPILER_VERSION_${comp} 1)
+          endif()
+        endforeach()
+      endforeach()
+      if("${info}" MATCHES "INFO:compiler_wrapper\\[([^]\"]*)\\]")
+        set(COMPILER_WRAPPER "${CMAKE_MATCH_1}")
+      endif()
+      if("${info}" MATCHES "INFO:simulate\\[([^]\"]*)\\]")
+        set(SIMULATE_ID "${CMAKE_MATCH_1}")
+      endif()
+      if("${info}" MATCHES "INFO:simulate_version\\[([^]\"]*)\\]")
+        string(REGEX REPLACE "^0+([0-9])" "\\1" SIMULATE_VERSION "${CMAKE_MATCH_1}")
+        string(REGEX REPLACE "\\.0+([0-9])" ".\\1" SIMULATE_VERSION "${SIMULATE_VERSION}")
+      endif()
+      if("${info}" MATCHES "INFO:qnxnto\\[\\]")
+        set(COMPILER_QNXNTO 1)
+      endif()
+      if("${info}" MATCHES "INFO:dialect_default\\[([^]\"]*)\\]")
+        set(CMAKE_${lang}_STANDARD_COMPUTED_DEFAULT "${CMAKE_MATCH_1}")
+      endif()
+    endforeach()
+
+    # Construct compiler version from components if needed.
+    if(NOT DEFINED COMPILER_VERSION AND HAVE_COMPILER_VERSION_MAJOR)
+      set(COMPILER_VERSION "${COMPILER_VERSION_MAJOR}")
+      if(HAVE_COMPILER_VERSION_MINOR)
+        set(COMPILER_VERSION "${COMPILER_VERSION}.${COMPILER_VERSION_MINOR}")
+        if(HAVE_COMPILER_VERSION_PATCH)
+          set(COMPILER_VERSION "${COMPILER_VERSION}.${COMPILER_VERSION_PATCH}")
+          if(HAVE_COMPILER_VERSION_TWEAK)
+            set(COMPILER_VERSION "${COMPILER_VERSION}.${COMPILER_VERSION_TWEAK}")
+          endif()
+        endif()
+      endif()
+    endif()
+
+    # Detect the exact architecture from the PE header.
+    if(WIN32)
+      # The offset to the PE signature is stored at 0x3c.
+      file(READ ${file} peoffsethex LIMIT 1 OFFSET 60 HEX)
+      string(SUBSTRING "${peoffsethex}" 0 1 peoffsethex1)
+      string(SUBSTRING "${peoffsethex}" 1 1 peoffsethex2)
+      set(peoffsetexpression "${peoffsethex1} * 16 + ${peoffsethex2}")
+      string(REPLACE "a" "10" peoffsetexpression "${peoffsetexpression}")
+      string(REPLACE "b" "11" peoffsetexpression "${peoffsetexpression}")
+      string(REPLACE "c" "12" peoffsetexpression "${peoffsetexpression}")
+      string(REPLACE "d" "13" peoffsetexpression "${peoffsetexpression}")
+      string(REPLACE "e" "14" peoffsetexpression "${peoffsetexpression}")
+      string(REPLACE "f" "15" peoffsetexpression "${peoffsetexpression}")
+      math(EXPR peoffset "${peoffsetexpression}")
+
+      file(READ ${file} peheader LIMIT 6 OFFSET ${peoffset} HEX)
+      if(peheader STREQUAL "50450000a201")
+        set(ARCHITECTURE_ID "SH3")
+      elseif(peheader STREQUAL "50450000a301")
+        set(ARCHITECTURE_ID "SH3DSP")
+      elseif(peheader STREQUAL "50450000a601")
+        set(ARCHITECTURE_ID "SH4")
+      elseif(peheader STREQUAL "50450000a801")
+        set(ARCHITECTURE_ID "SH5")
+      endif()
+    endif()
+
+    # Check if a valid compiler and platform were found.
+    if(COMPILER_ID AND NOT COMPILER_ID_TWICE)
+      set(CMAKE_${lang}_COMPILER_ID "${COMPILER_ID}")
+      set(CMAKE_${lang}_PLATFORM_ID "${PLATFORM_ID}")
+      set(MSVC_${lang}_ARCHITECTURE_ID "${ARCHITECTURE_ID}")
+      set(CMAKE_${lang}_COMPILER_VERSION "${COMPILER_VERSION}")
+      set(CMAKE_${lang}_SIMULATE_ID "${SIMULATE_ID}")
+      set(CMAKE_${lang}_SIMULATE_VERSION "${SIMULATE_VERSION}")
+    endif()
+
+    # Check the compiler identification string.
+    if(CMAKE_${lang}_COMPILER_ID)
+      # The compiler identification was found.
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "The ${lang} compiler identification is ${CMAKE_${lang}_COMPILER_ID}, found in \""
+        "${file}\"\n\n")
+    else()
+      # The compiler identification could not be found.
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "The ${lang} compiler identification could not be found in \""
+        "${file}\"\n\n")
+    endif()
+  endif()
+
+  # try to figure out the executable format: ELF, COFF, Mach-O
+  if(NOT CMAKE_EXECUTABLE_FORMAT)
+    file(READ ${file} CMAKE_EXECUTABLE_MAGIC LIMIT 4 HEX)
+
+    # ELF files start with 0x7f"ELF"
+    if("${CMAKE_EXECUTABLE_MAGIC}" STREQUAL "7f454c46")
+      set(CMAKE_EXECUTABLE_FORMAT "ELF" CACHE INTERNAL "Executable file format")
+    endif()
+
+#    # COFF (.exe) files start with "MZ"
+#    if("${CMAKE_EXECUTABLE_MAGIC}" MATCHES "4d5a....")
+#      set(CMAKE_EXECUTABLE_FORMAT "COFF" CACHE STRING "Executable file format")
+#    endif()
+#
+#    # Mach-O files start with CAFEBABE or FEEDFACE, according to http://radio.weblogs.com/0100490/2003/01/28.html
+#    if("${CMAKE_EXECUTABLE_MAGIC}" MATCHES "cafebabe")
+#      set(CMAKE_EXECUTABLE_FORMAT "MACHO" CACHE STRING "Executable file format")
+#    endif()
+#    if("${CMAKE_EXECUTABLE_MAGIC}" MATCHES "feedface")
+#      set(CMAKE_EXECUTABLE_FORMAT "MACHO" CACHE STRING "Executable file format")
+#    endif()
+
+  endif()
+  if(NOT DEFINED CMAKE_EXECUTABLE_FORMAT)
+    set(CMAKE_EXECUTABLE_FORMAT)
+  endif()
+  # Return the information extracted.
+  set(CMAKE_${lang}_COMPILER_ID "${CMAKE_${lang}_COMPILER_ID}" PARENT_SCOPE)
+  set(CMAKE_${lang}_PLATFORM_ID "${CMAKE_${lang}_PLATFORM_ID}" PARENT_SCOPE)
+  set(MSVC_${lang}_ARCHITECTURE_ID "${MSVC_${lang}_ARCHITECTURE_ID}"
+    PARENT_SCOPE)
+  set(CMAKE_${lang}_COMPILER_VERSION "${CMAKE_${lang}_COMPILER_VERSION}" PARENT_SCOPE)
+  set(CMAKE_${lang}_COMPILER_WRAPPER "${COMPILER_WRAPPER}" PARENT_SCOPE)
+  set(CMAKE_${lang}_SIMULATE_ID "${CMAKE_${lang}_SIMULATE_ID}" PARENT_SCOPE)
+  set(CMAKE_${lang}_SIMULATE_VERSION "${CMAKE_${lang}_SIMULATE_VERSION}" PARENT_SCOPE)
+  set(CMAKE_EXECUTABLE_FORMAT "${CMAKE_EXECUTABLE_FORMAT}" PARENT_SCOPE)
+  set(COMPILER_QNXNTO "${COMPILER_QNXNTO}" PARENT_SCOPE)
+  set(CMAKE_${lang}_STANDARD_COMPUTED_DEFAULT "${CMAKE_${lang}_STANDARD_COMPUTED_DEFAULT}" PARENT_SCOPE)
+endfunction()
+
+#-----------------------------------------------------------------------------
+# Function to query the compiler vendor.
+# This uses a table with entries of the form
+#   list(APPEND CMAKE_${lang}_COMPILER_ID_VENDORS ${vendor})
+#   set(CMAKE_${lang}_COMPILER_ID_VENDOR_FLAGS_${vendor} -some-vendor-flag)
+#   set(CMAKE_${lang}_COMPILER_ID_VENDOR_REGEX_${vendor} "Some Vendor Output")
+# We try running the compiler with the flag for each vendor and
+# matching its regular expression in the output.
+function(CMAKE_DETERMINE_COMPILER_ID_VENDOR lang)
+
+  if(NOT CMAKE_${lang}_COMPILER_ID_DIR)
+    # We get here when this function is called not from within CMAKE_DETERMINE_COMPILER_ID()
+    # This is done e.g. for detecting the compiler ID for assemblers.
+    # Compute the directory in which to run the test and Create a clean working directory.
+    set(CMAKE_${lang}_COMPILER_ID_DIR ${CMAKE_PLATFORM_INFO_DIR}/CompilerId${lang})
+    file(REMOVE_RECURSE ${CMAKE_${lang}_COMPILER_ID_DIR})
+    file(MAKE_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR})
+  endif()
+
+
+  foreach(vendor ${CMAKE_${lang}_COMPILER_ID_VENDORS})
+    set(flags ${CMAKE_${lang}_COMPILER_ID_VENDOR_FLAGS_${vendor}})
+    set(regex ${CMAKE_${lang}_COMPILER_ID_VENDOR_REGEX_${vendor}})
+    execute_process(
+      COMMAND "${CMAKE_${lang}_COMPILER}"
+      ${CMAKE_${lang}_COMPILER_ID_ARG1}
+      ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
+      ${flags}
+      WORKING_DIRECTORY ${CMAKE_${lang}_COMPILER_ID_DIR}
+      OUTPUT_VARIABLE output ERROR_VARIABLE output
+      RESULT_VARIABLE result
+      TIMEOUT 10
+      )
+
+    if("${output}" MATCHES "${regex}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Checking whether the ${lang} compiler is ${vendor} using \"${flags}\" "
+        "matched \"${regex}\":\n${output}")
+      set(CMAKE_${lang}_COMPILER_ID "${vendor}" PARENT_SCOPE)
+      break()
+    else()
+      if("${result}" MATCHES  "timeout")
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+          "Checking whether the ${lang} compiler is ${vendor} using \"${flags}\" "
+          "terminated after 10 s due to timeout.")
+      else()
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+          "Checking whether the ${lang} compiler is ${vendor} using \"${flags}\" "
+          "did not match \"${regex}\":\n${output}")
+       endif()
+    endif()
+  endforeach()
+endfunction()
+
+function(CMAKE_DETERMINE_MSVC_SHOWINCLUDES_PREFIX lang)
+  # Run this MSVC-compatible compiler to detect what the /showIncludes
+  # option displays.  We can use a C source even with the C++ compiler
+  # because MSVC-compatible compilers handle both and show the same output.
+  set(showdir ${CMAKE_BINARY_DIR}/CMakeFiles/ShowIncludes)
+  file(WRITE ${showdir}/foo.h "\n")
+  file(WRITE ${showdir}/main.c "#include \"foo.h\" \nint main(){}\n")
+  execute_process(
+    COMMAND "${CMAKE_${lang}_COMPILER}"
+            ${CMAKE_${lang}_COMPILER_ID_ARG1}
+            ${CMAKE_${lang}_COMPILER_ID_FLAGS_LIST}
+            /nologo /showIncludes /c main.c
+    WORKING_DIRECTORY ${showdir}
+    OUTPUT_VARIABLE out
+    ERROR_VARIABLE err
+    RESULT_VARIABLE res
+    )
+  if(res EQUAL 0 AND "${out}" MATCHES "(^|\n)([^:\n]*:[^:\n]*:[ \t]*)")
+    set(CMAKE_${lang}_CL_SHOWINCLUDES_PREFIX "${CMAKE_MATCH_2}" PARENT_SCOPE)
+  else()
+    set(CMAKE_${lang}_CL_SHOWINCLUDES_PREFIX "" PARENT_SCOPE)
+  endif()
+endfunction()
diff --git a/share/cmake-3.6/Modules/CMakeDetermineFortranCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineFortranCompiler.cmake
new file mode 100644
index 0000000..4f2a70c
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeDetermineFortranCompiler.cmake
@@ -0,0 +1,277 @@
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# determine the compiler to use for Fortran programs
+# NOTE, a generator may set CMAKE_Fortran_COMPILER before
+# loading this file to force a compiler.
+# use environment variable FC first if defined by user, next use
+# the cmake variable CMAKE_GENERATOR_FC which can be defined by a generator
+# as a default compiler
+
+include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
+include(Platform/${CMAKE_SYSTEM_NAME}-Fortran OPTIONAL)
+if(NOT CMAKE_Fortran_COMPILER_NAMES)
+  set(CMAKE_Fortran_COMPILER_NAMES f95)
+endif()
+
+if(${CMAKE_GENERATOR} MATCHES "Visual Studio")
+elseif("${CMAKE_GENERATOR}" MATCHES "Xcode")
+  set(CMAKE_Fortran_COMPILER_XCODE_TYPE sourcecode.fortran.f90)
+  _cmake_find_compiler_path(Fortran)
+else()
+  if(NOT CMAKE_Fortran_COMPILER)
+    # prefer the environment variable CC
+    if(NOT $ENV{FC} STREQUAL "")
+      get_filename_component(CMAKE_Fortran_COMPILER_INIT $ENV{FC} PROGRAM PROGRAM_ARGS CMAKE_Fortran_FLAGS_ENV_INIT)
+      if(CMAKE_Fortran_FLAGS_ENV_INIT)
+        set(CMAKE_Fortran_COMPILER_ARG1 "${CMAKE_Fortran_FLAGS_ENV_INIT}" CACHE STRING "First argument to Fortran compiler")
+      endif()
+      if(EXISTS ${CMAKE_Fortran_COMPILER_INIT})
+      else()
+        message(FATAL_ERROR "Could not find compiler set in environment variable FC:\n$ENV{FC}.")
+      endif()
+    endif()
+
+    # next try prefer the compiler specified by the generator
+    if(CMAKE_GENERATOR_FC)
+      if(NOT CMAKE_Fortran_COMPILER_INIT)
+        set(CMAKE_Fortran_COMPILER_INIT ${CMAKE_GENERATOR_FC})
+      endif()
+    endif()
+
+    # finally list compilers to try
+    if(NOT CMAKE_Fortran_COMPILER_INIT)
+      # Known compilers:
+      #  f77/f90/f95: generic compiler names
+      #  ftn: Cray fortran compiler wrapper
+      #  g77: GNU Fortran 77 compiler
+      #  gfortran: putative GNU Fortran 95+ compiler (in progress)
+      #  fort77: native F77 compiler under HP-UX (and some older Crays)
+      #  frt: Fujitsu F77 compiler
+      #  pathf90/pathf95/pathf2003: PathScale Fortran compiler
+      #  pgf77/pgf90/pgf95/pgfortran: Portland Group F77/F90/F95 compilers
+      #  xlf/xlf90/xlf95: IBM (AIX) F77/F90/F95 compilers
+      #  lf95: Lahey-Fujitsu F95 compiler
+      #  fl32: Microsoft Fortran 77 "PowerStation" compiler
+      #  af77: Apogee F77 compiler for Intergraph hardware running CLIX
+      #  epcf90: "Edinburgh Portable Compiler" F90
+      #  fort: Compaq (now HP) Fortran 90/95 compiler for Tru64 and Linux/Alpha
+      #  ifc: Intel Fortran 95 compiler for Linux/x86
+      #  efc: Intel Fortran 95 compiler for IA64
+      #
+      #  The order is 95 or newer compilers first, then 90,
+      #  then 77 or older compilers, gnu is always last in the group,
+      #  so if you paid for a compiler it is picked by default.
+      set(CMAKE_Fortran_COMPILER_LIST
+        ftn
+        ifort ifc af95 af90 efc f95 pathf2003 pathf95 pgf95 pgfortran lf95 xlf95
+        fort gfortran gfortran-4 g95 f90 pathf90 pgf90 xlf90 epcf90 fort77
+        frt pgf77 xlf fl32 af77 g77 f77
+        )
+
+      # Vendor-specific compiler names.
+      set(_Fortran_COMPILER_NAMES_GNU       gfortran gfortran-4 g95 g77)
+      set(_Fortran_COMPILER_NAMES_Intel     ifort ifc efc)
+      set(_Fortran_COMPILER_NAMES_Absoft    af95 af90 af77)
+      set(_Fortran_COMPILER_NAMES_PGI       pgf95 pgfortran pgf90 pgf77)
+      set(_Fortran_COMPILER_NAMES_PathScale pathf2003 pathf95 pathf90)
+      set(_Fortran_COMPILER_NAMES_XL        xlf)
+      set(_Fortran_COMPILER_NAMES_VisualAge xlf95 xlf90 xlf)
+    endif()
+
+    _cmake_find_compiler(Fortran)
+
+  else()
+    _cmake_find_compiler_path(Fortran)
+  endif()
+  mark_as_advanced(CMAKE_Fortran_COMPILER)
+
+  # Each entry in this list is a set of extra flags to try
+  # adding to the compile line to see if it helps produce
+  # a valid identification executable.
+  set(CMAKE_Fortran_COMPILER_ID_TEST_FLAGS_FIRST
+    # Get verbose output to help distinguish compilers.
+    "-v"
+    )
+  set(CMAKE_Fortran_COMPILER_ID_TEST_FLAGS
+    # Try compiling to an object file only.
+    "-c"
+
+    # Intel on windows does not preprocess by default.
+    "-fpp"
+    )
+endif()
+
+# Build a small source file to identify the compiler.
+if(NOT CMAKE_Fortran_COMPILER_ID_RUN)
+  set(CMAKE_Fortran_COMPILER_ID_RUN 1)
+
+  # Table of per-vendor compiler output regular expressions.
+  list(APPEND CMAKE_Fortran_COMPILER_ID_MATCH_VENDORS CCur)
+  set(CMAKE_Fortran_COMPILER_ID_MATCH_VENDOR_REGEX_CCur "Concurrent Fortran [0-9]+ Compiler")
+
+  # Table of per-vendor compiler id flags with expected output.
+  list(APPEND CMAKE_Fortran_COMPILER_ID_VENDORS Compaq)
+  set(CMAKE_Fortran_COMPILER_ID_VENDOR_FLAGS_Compaq "-what")
+  set(CMAKE_Fortran_COMPILER_ID_VENDOR_REGEX_Compaq "Compaq Visual Fortran")
+  list(APPEND CMAKE_Fortran_COMPILER_ID_VENDORS NAG) # Numerical Algorithms Group
+  set(CMAKE_Fortran_COMPILER_ID_VENDOR_FLAGS_NAG "-V")
+  set(CMAKE_Fortran_COMPILER_ID_VENDOR_REGEX_NAG "NAG Fortran Compiler")
+
+  # Match the link line from xcodebuild output of the form
+  #  Ld ...
+  #      ...
+  #      /path/to/cc ...CompilerIdFortran/...
+  # to extract the compiler front-end for the language.
+  set(CMAKE_Fortran_COMPILER_ID_TOOL_MATCH_REGEX "\nLd[^\n]*(\n[ \t]+[^\n]*)*\n[ \t]+([^ \t\r\n]+)[^\r\n]*-o[^\r\n]*CompilerIdFortran/(\\./)?(CompilerIdFortran.xctest/)?CompilerIdFortran[ \t\n\\\"]")
+  set(CMAKE_Fortran_COMPILER_ID_TOOL_MATCH_INDEX 2)
+
+  set(_version_info "")
+  foreach(m MAJOR MINOR PATCH TWEAK)
+    set(_COMP "_${m}")
+    set(_version_info "${_version_info}
+#if defined(COMPILER_VERSION${_COMP})")
+    foreach(d 1 2 3 4 5 6 7 8)
+      set(_version_info "${_version_info}
+# undef DEC
+# undef HEX
+# define DEC(n) DEC_${d}(n)
+# define HEX(n) HEX_${d}(n)
+# if COMPILER_VERSION${_COMP} == 0
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[0]'
+# elif COMPILER_VERSION${_COMP} == 1
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[1]'
+# elif COMPILER_VERSION${_COMP} == 2
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[2]'
+# elif COMPILER_VERSION${_COMP} == 3
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[3]'
+# elif COMPILER_VERSION${_COMP} == 4
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[4]'
+# elif COMPILER_VERSION${_COMP} == 5
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[5]'
+# elif COMPILER_VERSION${_COMP} == 6
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[6]'
+# elif COMPILER_VERSION${_COMP} == 7
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[7]'
+# elif COMPILER_VERSION${_COMP} == 8
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[8]'
+# elif COMPILER_VERSION${_COMP} == 9
+        PRINT *, 'INFO:compiler_version${_COMP}_digit_${d}[9]'
+# endif
+")
+    endforeach()
+    set(_version_info "${_version_info}
+#endif")
+  endforeach()
+  set(CMAKE_Fortran_COMPILER_ID_VERSION_INFO "${_version_info}")
+  unset(_version_info)
+  unset(_COMP)
+
+  # Try to identify the compiler.
+  set(CMAKE_Fortran_COMPILER_ID)
+  include(${CMAKE_ROOT}/Modules/CMakeDetermineCompilerId.cmake)
+  CMAKE_DETERMINE_COMPILER_ID(Fortran FFLAGS CMakeFortranCompilerId.F)
+
+  # Fall back to old is-GNU test.
+  if(NOT CMAKE_Fortran_COMPILER_ID)
+    execute_process(COMMAND ${CMAKE_Fortran_COMPILER} ${CMAKE_Fortran_COMPILER_ID_FLAGS_LIST} -E "${CMAKE_ROOT}/Modules/CMakeTestGNU.c"
+      OUTPUT_VARIABLE CMAKE_COMPILER_OUTPUT RESULT_VARIABLE CMAKE_COMPILER_RETURN)
+    if(NOT CMAKE_COMPILER_RETURN)
+      if(CMAKE_COMPILER_OUTPUT MATCHES "THIS_IS_GNU")
+        set(CMAKE_Fortran_COMPILER_ID "GNU")
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+          "Determining if the Fortran compiler is GNU succeeded with "
+          "the following output:\n${CMAKE_COMPILER_OUTPUT}\n\n")
+      else()
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+          "Determining if the Fortran compiler is GNU failed with "
+          "the following output:\n${CMAKE_COMPILER_OUTPUT}\n\n")
+      endif()
+      if(NOT CMAKE_Fortran_PLATFORM_ID)
+        if(CMAKE_COMPILER_OUTPUT MATCHES "THIS_IS_MINGW")
+          set(CMAKE_Fortran_PLATFORM_ID "MinGW")
+        endif()
+        if(CMAKE_COMPILER_OUTPUT MATCHES "THIS_IS_CYGWIN")
+          set(CMAKE_Fortran_PLATFORM_ID "Cygwin")
+        endif()
+      endif()
+    endif()
+  endif()
+
+  # Fall back for GNU MINGW, which is not always detected correctly
+  # (__MINGW32__ is defined for the C language, but perhaps not for Fortran!)
+  if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU" AND NOT CMAKE_Fortran_PLATFORM_ID)
+    execute_process(COMMAND ${CMAKE_Fortran_COMPILER} ${CMAKE_Fortran_COMPILER_ID_FLAGS_LIST} -E "${CMAKE_ROOT}/Modules/CMakeTestGNU.c"
+      OUTPUT_VARIABLE CMAKE_COMPILER_OUTPUT RESULT_VARIABLE CMAKE_COMPILER_RETURN)
+    if(NOT CMAKE_COMPILER_RETURN)
+      if(CMAKE_COMPILER_OUTPUT MATCHES "THIS_IS_MINGW")
+        set(CMAKE_Fortran_PLATFORM_ID "MinGW")
+      endif()
+      if(CMAKE_COMPILER_OUTPUT MATCHES "THIS_IS_CYGWIN")
+        set(CMAKE_Fortran_PLATFORM_ID "Cygwin")
+      endif()
+    endif()
+  endif()
+
+  # Set old compiler and platform id variables.
+  if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
+    set(CMAKE_COMPILER_IS_GNUG77 1)
+  endif()
+  if(CMAKE_Fortran_PLATFORM_ID MATCHES "MinGW")
+    set(CMAKE_COMPILER_IS_MINGW 1)
+  elseif(CMAKE_Fortran_PLATFORM_ID MATCHES "Cygwin")
+    set(CMAKE_COMPILER_IS_CYGWIN 1)
+  endif()
+endif()
+
+if (NOT _CMAKE_TOOLCHAIN_LOCATION)
+  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_Fortran_COMPILER}" PATH)
+endif ()
+
+# if we have a fortran cross compiler, they have usually some prefix, like
+# e.g. powerpc-linux-gfortran, arm-elf-gfortran or i586-mingw32msvc-gfortran , optionally
+# with a 3-component version number at the end (e.g. arm-eabi-gcc-4.5.2).
+# The other tools of the toolchain usually have the same prefix
+# NAME_WE cannot be used since then this test will fail for names like
+# "arm-unknown-nto-qnx6.3.0-gcc.exe", where BASENAME would be
+# "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-"
+if (CMAKE_CROSSCOMPILING  AND NOT _CMAKE_TOOLCHAIN_PREFIX)
+
+  if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
+    get_filename_component(COMPILER_BASENAME "${CMAKE_Fortran_COMPILER}" NAME)
+    if (COMPILER_BASENAME MATCHES "^(.+-)g?fortran(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$")
+      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+    endif ()
+
+    # if "llvm-" is part of the prefix, remove it, since llvm doesn't have its own binutils
+    # but uses the regular ar, objcopy, etc. (instead of llvm-objcopy etc.)
+    if ("${_CMAKE_TOOLCHAIN_PREFIX}" MATCHES "(.+-)?llvm-$")
+      set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1})
+    endif ()
+  endif()
+
+endif ()
+
+include(CMakeFindBinUtils)
+
+if(MSVC_Fortran_ARCHITECTURE_ID)
+  set(SET_MSVC_Fortran_ARCHITECTURE_ID
+    "set(MSVC_Fortran_ARCHITECTURE_ID ${MSVC_Fortran_ARCHITECTURE_ID})")
+endif()
+# configure variables set in this file for fast reload later on
+configure_file(${CMAKE_ROOT}/Modules/CMakeFortranCompiler.cmake.in
+  ${CMAKE_PLATFORM_INFO_DIR}/CMakeFortranCompiler.cmake
+  @ONLY
+  )
+set(CMAKE_Fortran_COMPILER_ENV_VAR "FC")
diff --git a/share/cmake-3.2/Modules/CMakeDetermineJavaCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineJavaCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineJavaCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineJavaCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeDetermineRCCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineRCCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineRCCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineRCCompiler.cmake
diff --git a/share/cmake-3.6/Modules/CMakeDetermineSwiftCompiler.cmake b/share/cmake-3.6/Modules/CMakeDetermineSwiftCompiler.cmake
new file mode 100644
index 0000000..bff1ae9
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeDetermineSwiftCompiler.cmake
@@ -0,0 +1,53 @@
+
+#=============================================================================
+# Copyright 2002-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(${CMAKE_ROOT}/Modules/CMakeDetermineCompiler.cmake)
+
+if("${CMAKE_GENERATOR}" STREQUAL "Xcode")
+  if(XCODE_VERSION VERSION_LESS 6.1)
+    message(FATAL_ERROR "Swift language not supported by Xcode ${XCODE_VERSION}")
+  endif()
+  set(CMAKE_Swift_COMPILER_XCODE_TYPE sourcecode.swift)
+  _cmake_find_compiler_path(Swift)
+else()
+  message(FATAL_ERROR "Swift language not supported by \"${CMAKE_GENERATOR}\" generator")
+endif()
+
+# Build a small source file to identify the compiler.
+if(NOT CMAKE_Swift_COMPILER_ID_RUN)
+  set(CMAKE_Swift_COMPILER_ID_RUN 1)
+
+  list(APPEND CMAKE_Swift_COMPILER_ID_MATCH_VENDORS Apple)
+  set(CMAKE_Swift_COMPILER_ID_MATCH_VENDOR_REGEX_Apple "com.apple.xcode.tools.swift.compiler")
+
+  set(CMAKE_Swift_COMPILER_ID_TOOL_MATCH_REGEX "\nCompileSwiftSources[^\n]*(\n[ \t]+[^\n]*)*\n[ \t]+([^ \t\r\n]+)[^\r\n]* -c[^\r\n]*CompilerIdSwift/CompilerId/main.swift")
+  set(CMAKE_Swift_COMPILER_ID_TOOL_MATCH_INDEX 2)
+
+  # Try to identify the compiler.
+  set(CMAKE_Swift_COMPILER_ID)
+  include(${CMAKE_ROOT}/Modules/CMakeDetermineCompilerId.cmake)
+  CMAKE_DETERMINE_COMPILER_ID(Swift "" CompilerId/main.swift)
+endif()
+
+if (NOT _CMAKE_TOOLCHAIN_LOCATION)
+  get_filename_component(_CMAKE_TOOLCHAIN_LOCATION "${CMAKE_Swift_COMPILER}" PATH)
+endif ()
+
+include(CMakeFindBinUtils)
+
+# configure variables set in this file for fast reload later on
+configure_file(${CMAKE_ROOT}/Modules/CMakeSwiftCompiler.cmake.in
+  ${CMAKE_PLATFORM_INFO_DIR}/CMakeSwiftCompiler.cmake
+  @ONLY
+  )
diff --git a/share/cmake-3.6/Modules/CMakeDetermineSystem.cmake b/share/cmake-3.6/Modules/CMakeDetermineSystem.cmake
new file mode 100644
index 0000000..d9f7579
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeDetermineSystem.cmake
@@ -0,0 +1,193 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is used by the Makefile generator to determin the following variables:
+# CMAKE_SYSTEM_NAME - on unix this is uname -s, for windows it is Windows
+# CMAKE_SYSTEM_VERSION - on unix this is uname -r, for windows it is empty
+# CMAKE_SYSTEM - ${CMAKE_SYSTEM}-${CMAKE_SYSTEM_VERSION}, for windows: ${CMAKE_SYSTEM}
+#
+#  Expected uname -s output:
+#
+# AIX                           AIX
+# BSD/OS                        BSD/OS
+# FreeBSD                       FreeBSD
+# HP-UX                         HP-UX
+# IRIX                          IRIX
+# Linux                         Linux
+# GNU/kFreeBSD                  GNU/kFreeBSD
+# NetBSD                        NetBSD
+# OpenBSD                       OpenBSD
+# OFS/1 (Digital Unix)          OSF1
+# SCO OpenServer 5              SCO_SV
+# SCO UnixWare 7                UnixWare
+# SCO UnixWare (pre release 7)  UNIX_SV
+# SCO XENIX                     Xenix
+# Solaris                       SunOS
+# SunOS                         SunOS
+# Tru64                         Tru64
+# Ultrix                        ULTRIX
+# cygwin                        CYGWIN_NT-5.1
+# MacOSX                        Darwin
+
+
+# find out on which system cmake runs
+if(CMAKE_HOST_UNIX)
+  find_program(CMAKE_UNAME uname /bin /usr/bin /usr/local/bin )
+  if(CMAKE_UNAME)
+    exec_program(uname ARGS -s OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_NAME)
+    exec_program(uname ARGS -r OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_VERSION)
+    if(CMAKE_HOST_SYSTEM_NAME MATCHES "Linux|CYGWIN.*|Darwin|^GNU$")
+      exec_program(uname ARGS -m OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
+        RETURN_VALUE val)
+      if(CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin" AND
+         CMAKE_HOST_SYSTEM_PROCESSOR STREQUAL "Power Macintosh")
+        # OS X ppc 'uname -m' may report 'Power Macintosh' instead of 'powerpc'
+        set(CMAKE_HOST_SYSTEM_PROCESSOR "powerpc")
+      endif()
+    elseif(CMAKE_HOST_SYSTEM_NAME MATCHES "OpenBSD")
+      exec_program(arch ARGS -s OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
+        RETURN_VALUE val)
+    else()
+      exec_program(uname ARGS -p OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
+        RETURN_VALUE val)
+      if("${val}" GREATER 0)
+        exec_program(uname ARGS -m OUTPUT_VARIABLE CMAKE_HOST_SYSTEM_PROCESSOR
+          RETURN_VALUE val)
+      endif()
+    endif()
+    # check the return of the last uname -m or -p
+    if("${val}" GREATER 0)
+        set(CMAKE_HOST_SYSTEM_PROCESSOR "unknown")
+    endif()
+    set(CMAKE_UNAME ${CMAKE_UNAME} CACHE INTERNAL "uname command")
+    # processor may have double quote in the name, and that needs to be removed
+    string(REPLACE "\"" "" CMAKE_HOST_SYSTEM_PROCESSOR "${CMAKE_HOST_SYSTEM_PROCESSOR}")
+    string(REPLACE "/" "_" CMAKE_HOST_SYSTEM_PROCESSOR "${CMAKE_HOST_SYSTEM_PROCESSOR}")
+  endif()
+else()
+  if(CMAKE_HOST_WIN32)
+    set (CMAKE_HOST_SYSTEM_NAME "Windows")
+    if (DEFINED ENV{PROCESSOR_ARCHITEW6432})
+      set (CMAKE_HOST_SYSTEM_PROCESSOR "$ENV{PROCESSOR_ARCHITEW6432}")
+    else()
+      set (CMAKE_HOST_SYSTEM_PROCESSOR "$ENV{PROCESSOR_ARCHITECTURE}")
+    endif()
+  endif()
+endif()
+
+# if a toolchain file is used, the user wants to cross compile.
+# in this case read the toolchain file and keep the CMAKE_HOST_SYSTEM_*
+# variables around so they can be used in CMakeLists.txt.
+# In all other cases, the host and target platform are the same.
+if(CMAKE_TOOLCHAIN_FILE)
+  # at first try to load it as path relative to the directory from which cmake has been run
+  include("${CMAKE_BINARY_DIR}/${CMAKE_TOOLCHAIN_FILE}" OPTIONAL RESULT_VARIABLE _INCLUDED_TOOLCHAIN_FILE)
+  if(NOT _INCLUDED_TOOLCHAIN_FILE)
+     # if the file isn't found there, check the default locations
+     include("${CMAKE_TOOLCHAIN_FILE}" OPTIONAL RESULT_VARIABLE _INCLUDED_TOOLCHAIN_FILE)
+  endif()
+
+  if(_INCLUDED_TOOLCHAIN_FILE)
+    set(CMAKE_TOOLCHAIN_FILE "${_INCLUDED_TOOLCHAIN_FILE}" CACHE FILEPATH "The CMake toolchain file" FORCE)
+  else()
+    message(FATAL_ERROR "Could not find toolchain file: ${CMAKE_TOOLCHAIN_FILE}")
+    set(CMAKE_TOOLCHAIN_FILE "NOTFOUND" CACHE FILEPATH "The CMake toolchain file" FORCE)
+  endif()
+endif()
+
+
+# if CMAKE_SYSTEM_NAME is here already set, either it comes from a toolchain file
+# or it was set via -DCMAKE_SYSTEM_NAME=...
+# if that's the case, assume we are crosscompiling
+if(CMAKE_SYSTEM_NAME)
+  if(NOT DEFINED CMAKE_CROSSCOMPILING)
+    set(CMAKE_CROSSCOMPILING TRUE)
+  endif()
+  set(PRESET_CMAKE_SYSTEM_NAME TRUE)
+elseif(CMAKE_VS_WINCE_VERSION)
+  set(CMAKE_SYSTEM_NAME      "WindowsCE")
+  set(CMAKE_SYSTEM_VERSION   "${CMAKE_VS_WINCE_VERSION}")
+  set(CMAKE_SYSTEM_PROCESSOR "${MSVC_C_ARCHITECTURE_ID}")
+  set(CMAKE_CROSSCOMPILING TRUE)
+  set(PRESET_CMAKE_SYSTEM_NAME TRUE)
+else()
+  set(CMAKE_SYSTEM_NAME      "${CMAKE_HOST_SYSTEM_NAME}")
+  if(NOT DEFINED CMAKE_SYSTEM_VERSION)
+    set(CMAKE_SYSTEM_VERSION "${CMAKE_HOST_SYSTEM_VERSION}")
+  endif()
+  set(CMAKE_SYSTEM_PROCESSOR "${CMAKE_HOST_SYSTEM_PROCESSOR}")
+  set(CMAKE_CROSSCOMPILING FALSE)
+  set(PRESET_CMAKE_SYSTEM_NAME FALSE)
+endif()
+
+
+macro(ADJUST_CMAKE_SYSTEM_VARIABLES _PREFIX)
+  if(NOT ${_PREFIX}_NAME)
+    set(${_PREFIX}_NAME "UnknownOS")
+  endif()
+
+  # fix for BSD/OS , remove the /
+  if(${_PREFIX}_NAME MATCHES BSD.OS)
+    set(${_PREFIX}_NAME BSDOS)
+  endif()
+
+  # fix for GNU/kFreeBSD, remove the GNU/
+  if(${_PREFIX}_NAME MATCHES kFreeBSD)
+    set(${_PREFIX}_NAME kFreeBSD)
+  endif()
+
+  # fix for CYGWIN which has windows version in it
+  if(${_PREFIX}_NAME MATCHES CYGWIN)
+    set(${_PREFIX}_NAME CYGWIN)
+  endif()
+
+  # set CMAKE_SYSTEM to the CMAKE_SYSTEM_NAME
+  set(${_PREFIX}  ${${_PREFIX}_NAME})
+  # if there is a CMAKE_SYSTEM_VERSION then add a -${CMAKE_SYSTEM_VERSION}
+  if(${_PREFIX}_VERSION)
+    set(${_PREFIX} ${${_PREFIX}}-${${_PREFIX}_VERSION})
+  endif()
+
+endmacro()
+
+ADJUST_CMAKE_SYSTEM_VARIABLES(CMAKE_SYSTEM)
+ADJUST_CMAKE_SYSTEM_VARIABLES(CMAKE_HOST_SYSTEM)
+
+# this file is also executed from cpack, then we don't need to generate these files
+# in this case there is no CMAKE_BINARY_DIR
+if(CMAKE_BINARY_DIR)
+  # write entry to the log file
+  if(PRESET_CMAKE_SYSTEM_NAME)
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+                "The target system is: ${CMAKE_SYSTEM_NAME} - ${CMAKE_SYSTEM_VERSION} - ${CMAKE_SYSTEM_PROCESSOR}\n")
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+                "The host system is: ${CMAKE_HOST_SYSTEM_NAME} - ${CMAKE_HOST_SYSTEM_VERSION} - ${CMAKE_HOST_SYSTEM_PROCESSOR}\n")
+  else()
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+                "The system is: ${CMAKE_SYSTEM_NAME} - ${CMAKE_SYSTEM_VERSION} - ${CMAKE_SYSTEM_PROCESSOR}\n")
+  endif()
+
+  # if a toolchain file is used, it needs to be included in the configured file,
+  # so settings done there are also available if they don't go in the cache and in try_compile()
+  set(INCLUDE_CMAKE_TOOLCHAIN_FILE_IF_REQUIRED)
+  if(CMAKE_TOOLCHAIN_FILE)
+    set(INCLUDE_CMAKE_TOOLCHAIN_FILE_IF_REQUIRED "include(\"${CMAKE_TOOLCHAIN_FILE}\")")
+  endif()
+
+  # configure variables set in this file for fast reload, the template file is defined at the top of this file
+  configure_file(${CMAKE_ROOT}/Modules/CMakeSystem.cmake.in
+                ${CMAKE_PLATFORM_INFO_DIR}/CMakeSystem.cmake
+                @ONLY)
+
+endif()
diff --git a/share/cmake-3.2/Modules/CMakeDetermineVSServicePack.cmake b/share/cmake-3.6/Modules/CMakeDetermineVSServicePack.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeDetermineVSServicePack.cmake
rename to share/cmake-3.6/Modules/CMakeDetermineVSServicePack.cmake
diff --git a/share/cmake-3.6/Modules/CMakeExpandImportedTargets.cmake b/share/cmake-3.6/Modules/CMakeExpandImportedTargets.cmake
new file mode 100644
index 0000000..28f2e46
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeExpandImportedTargets.cmake
@@ -0,0 +1,156 @@
+#.rst:
+# CMakeExpandImportedTargets
+# --------------------------
+#
+# Deprecated.  Do not use.
+#
+# This module was once needed to expand imported targets to the underlying
+# libraries they reference on disk for use with the :command:`try_compile`
+# and :command:`try_run` commands.  These commands now support imported
+# libraries in their ``LINK_LIBRARIES`` options (since CMake 2.8.11
+# for :command:`try_compile` and since CMake 3.2 for :command:`try_run`).
+#
+# This module does not support the policy :policy:`CMP0022` ``NEW``
+# behavior or use of the :prop_tgt:`INTERFACE_LINK_LIBRARIES` property
+# because :manual:`generator expressions <cmake-generator-expressions(7)>`
+# cannot be evaluated during configuration.
+#
+# ::
+#
+#  CMAKE_EXPAND_IMPORTED_TARGETS(<var> LIBRARIES lib1 lib2...libN
+#                                [CONFIGURATION <config>])
+#
+# CMAKE_EXPAND_IMPORTED_TARGETS() takes a list of libraries and replaces
+# all imported targets contained in this list with their actual file
+# paths of the referenced libraries on disk, including the libraries
+# from their link interfaces.  If a CONFIGURATION is given, it uses the
+# respective configuration of the imported targets if it exists.  If no
+# CONFIGURATION is given, it uses the first configuration from
+# ${CMAKE_CONFIGURATION_TYPES} if set, otherwise ${CMAKE_BUILD_TYPE}.
+#
+# ::
+#
+#     cmake_expand_imported_targets(expandedLibs
+#       LIBRARIES ${CMAKE_REQUIRED_LIBRARIES}
+#       CONFIGURATION "${CMAKE_TRY_COMPILE_CONFIGURATION}" )
+
+
+#=============================================================================
+# Copyright 2012 Kitware, Inc.
+# Copyright 2009-2012 Alexander Neundorf <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
+
+function(CMAKE_EXPAND_IMPORTED_TARGETS _RESULT )
+
+   set(options )
+   set(oneValueArgs CONFIGURATION )
+   set(multiValueArgs LIBRARIES )
+
+   cmake_parse_arguments(CEIT "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
+
+   if(CEIT_UNPARSED_ARGUMENTS)
+      message(FATAL_ERROR "Unknown keywords given to CMAKE_EXPAND_IMPORTED_TARGETS(): \"${CEIT_UNPARSED_ARGUMENTS}\"")
+   endif()
+
+   if(NOT CEIT_CONFIGURATION)
+      if(CMAKE_CONFIGURATION_TYPES)
+         list(GET CMAKE_CONFIGURATION_TYPES 0 CEIT_CONFIGURATION)
+      else()
+         set(CEIT_CONFIGURATION ${CMAKE_BUILD_TYPE})
+      endif()
+   endif()
+
+   # handle imported library targets
+
+   set(_CCSR_REQ_LIBS ${CEIT_LIBRARIES})
+
+   set(_CHECK_FOR_IMPORTED_TARGETS TRUE)
+   set(_CCSR_LOOP_COUNTER 0)
+   while(_CHECK_FOR_IMPORTED_TARGETS)
+      math(EXPR _CCSR_LOOP_COUNTER "${_CCSR_LOOP_COUNTER} + 1 ")
+      set(_CCSR_NEW_REQ_LIBS )
+      set(_CHECK_FOR_IMPORTED_TARGETS FALSE)
+      foreach(_CURRENT_LIB ${_CCSR_REQ_LIBS})
+         if(TARGET "${_CURRENT_LIB}")
+           get_target_property(_importedConfigs "${_CURRENT_LIB}" IMPORTED_CONFIGURATIONS)
+         else()
+           set(_importedConfigs "")
+         endif()
+         if (_importedConfigs)
+#            message(STATUS "Detected imported target ${_CURRENT_LIB}")
+            # Ok, so this is an imported target.
+            # First we get the imported configurations.
+            # Then we get the location of the actual library on disk of the first configuration.
+            # then we'll get its link interface libraries property,
+            # iterate through it and replace all imported targets we find there
+            # with there actual location.
+
+            # guard against infinite loop: abort after 100 iterations ( 100 is arbitrary chosen)
+            if ("${_CCSR_LOOP_COUNTER}" LESS 100)
+               set(_CHECK_FOR_IMPORTED_TARGETS TRUE)
+#                else ()
+#                   message(STATUS "********* aborting loop, counter : ${_CCSR_LOOP_COUNTER}")
+            endif ()
+
+            # if one of the imported configurations equals ${CMAKE_TRY_COMPILE_CONFIGURATION},
+            # use it, otherwise simply use the first one:
+            list(FIND _importedConfigs "${CEIT_CONFIGURATION}" _configIndexToUse)
+            if("${_configIndexToUse}" EQUAL -1)
+              set(_configIndexToUse 0)
+            endif()
+            list(GET _importedConfigs ${_configIndexToUse} _importedConfigToUse)
+
+            get_target_property(_importedLocation "${_CURRENT_LIB}" IMPORTED_LOCATION_${_importedConfigToUse})
+            get_target_property(_linkInterfaceLibs "${_CURRENT_LIB}" IMPORTED_LINK_INTERFACE_LIBRARIES_${_importedConfigToUse} )
+
+            list(APPEND _CCSR_NEW_REQ_LIBS  "${_importedLocation}")
+#            message(STATUS "Appending lib ${_CURRENT_LIB} as ${_importedLocation}")
+            if(_linkInterfaceLibs)
+               foreach(_currentLinkInterfaceLib ${_linkInterfaceLibs})
+#                  message(STATUS "Appending link interface lib ${_currentLinkInterfaceLib}")
+                  if(_currentLinkInterfaceLib)
+                     list(APPEND _CCSR_NEW_REQ_LIBS "${_currentLinkInterfaceLib}" )
+                  endif()
+               endforeach()
+            endif()
+         else()
+            # "Normal" libraries are just used as they are.
+            list(APPEND _CCSR_NEW_REQ_LIBS "${_CURRENT_LIB}" )
+#            message(STATUS "Appending lib directly: ${_CURRENT_LIB}")
+         endif()
+      endforeach()
+
+      set(_CCSR_REQ_LIBS ${_CCSR_NEW_REQ_LIBS} )
+   endwhile()
+
+   # Finally we iterate once more over all libraries. This loop only removes
+   # all remaining imported target names (there shouldn't be any left anyway).
+   set(_CCSR_NEW_REQ_LIBS )
+   foreach(_CURRENT_LIB ${_CCSR_REQ_LIBS})
+      if(TARGET "${_CURRENT_LIB}")
+        get_target_property(_importedConfigs "${_CURRENT_LIB}" IMPORTED_CONFIGURATIONS)
+      else()
+        set(_importedConfigs "")
+      endif()
+      if (NOT _importedConfigs)
+         list(APPEND _CCSR_NEW_REQ_LIBS "${_CURRENT_LIB}" )
+#         message(STATUS "final: appending ${_CURRENT_LIB}")
+      else ()
+#             message(STATUS "final: skipping ${_CURRENT_LIB}")
+      endif ()
+   endforeach()
+#   message(STATUS "setting -${_RESULT}- to -${_CCSR_NEW_REQ_LIBS}-")
+   set(${_RESULT} "${_CCSR_NEW_REQ_LIBS}" PARENT_SCOPE)
+
+endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeExportBuildSettings.cmake b/share/cmake-3.6/Modules/CMakeExportBuildSettings.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeExportBuildSettings.cmake
rename to share/cmake-3.6/Modules/CMakeExportBuildSettings.cmake
diff --git a/share/cmake-3.6/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake b/share/cmake-3.6/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake
new file mode 100644
index 0000000..3bfb876
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake
@@ -0,0 +1,123 @@
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file is included by CMakeFindEclipseCDT4.cmake and CMakeFindCodeBlocks.cmake
+
+# The Eclipse and the CodeBlocks generators need to know the standard include path
+# so that they can find the headers at runtime and parsing etc. works better
+# This is done here by actually running gcc with the options so it prints its
+# system include directories, which are parsed then and stored in the cache.
+macro(_DETERMINE_GCC_SYSTEM_INCLUDE_DIRS _lang _resultIncludeDirs _resultDefines)
+  set(${_resultIncludeDirs})
+  set(_gccOutput)
+  file(WRITE "${CMAKE_BINARY_DIR}/CMakeFiles/dummy" "\n" )
+
+  if (${_lang} STREQUAL "c++")
+    set(_compilerExecutable "${CMAKE_CXX_COMPILER}")
+    set(_arg1 "${CMAKE_CXX_COMPILER_ARG1}")
+
+    if (CMAKE_CXX_FLAGS MATCHES "(-stdlib=[^ ]+)")
+      set(_stdlib "${CMAKE_MATCH_1}")
+    endif ()
+    if (CMAKE_CXX_FLAGS MATCHES "(-std=[^ ]+)")
+      set(_stdver "${CMAKE_MATCH_1}")
+    endif ()
+  else ()
+    set(_compilerExecutable "${CMAKE_C_COMPILER}")
+    set(_arg1 "${CMAKE_C_COMPILER_ARG1}")
+  endif ()
+  execute_process(COMMAND ${_compilerExecutable} ${_arg1} ${_stdver} ${_stdlib} -v -E -x ${_lang} -dD dummy
+                  WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/CMakeFiles
+                  ERROR_VARIABLE _gccOutput
+                  OUTPUT_VARIABLE _gccStdout )
+  file(REMOVE "${CMAKE_BINARY_DIR}/CMakeFiles/dummy")
+
+  # First find the system include dirs:
+  if( "${_gccOutput}" MATCHES "> search starts here[^\n]+\n *(.+ *\n) *End of (search) list" )
+
+    # split the output into lines and then remove leading and trailing spaces from each of them:
+    string(REGEX MATCHALL "[^\n]+\n" _includeLines "${CMAKE_MATCH_1}")
+    foreach(nextLine ${_includeLines})
+      # on OSX, gcc says things like this:  "/System/Library/Frameworks (framework directory)", strip the last part
+      string(REGEX REPLACE "\\(framework directory\\)" "" nextLineNoFramework "${nextLine}")
+      # strip spaces at the beginning and the end
+      string(STRIP "${nextLineNoFramework}" _includePath)
+      list(APPEND ${_resultIncludeDirs} "${_includePath}")
+    endforeach()
+
+  endif()
+
+
+  # now find the builtin macros:
+  string(REGEX MATCHALL "#define[^\n]+\n" _defineLines "${_gccStdout}")
+# A few example lines which the regexp below has to match properly:
+#  #define   MAX(a,b) ((a) > (b) ? (a) : (b))
+#  #define __fastcall __attribute__((__fastcall__))
+#  #define   FOO (23)
+#  #define __UINTMAX_TYPE__ long long unsigned int
+#  #define __UINTMAX_TYPE__ long long unsigned int
+#  #define __i386__  1
+
+  foreach(nextLine ${_defineLines})
+    string(REGEX MATCH "^#define +([A-Za-z_][A-Za-z0-9_]*)(\\([^\\)]+\\))? +(.+) *$" _dummy "${nextLine}")
+    set(_name "${CMAKE_MATCH_1}${CMAKE_MATCH_2}")
+    string(STRIP "${CMAKE_MATCH_3}" _value)
+    #message(STATUS "m1: -${CMAKE_MATCH_1}- m2: -${CMAKE_MATCH_2}- m3: -${CMAKE_MATCH_3}-")
+
+    list(APPEND ${_resultDefines} "${_name}")
+    if(_value)
+      list(APPEND ${_resultDefines} "${_value}")
+    else()
+      list(APPEND ${_resultDefines} " ")
+    endif()
+  endforeach()
+
+endmacro()
+
+# Save the current LC_ALL, LC_MESSAGES, and LANG environment variables and set them
+# to "C" that way GCC's "search starts here" text is in English and we can grok it.
+set(_orig_lc_all      $ENV{LC_ALL})
+set(_orig_lc_messages $ENV{LC_MESSAGES})
+set(_orig_lang        $ENV{LANG})
+
+set(ENV{LC_ALL}      C)
+set(ENV{LC_MESSAGES} C)
+set(ENV{LANG}        C)
+
+# Now check for C, works for gcc and Intel compiler at least
+if (NOT CMAKE_EXTRA_GENERATOR_C_SYSTEM_INCLUDE_DIRS)
+  if (CMAKE_C_COMPILER_ID MATCHES GNU  OR  CMAKE_C_COMPILER_ID MATCHES Intel  OR  CMAKE_C_COMPILER_ID MATCHES Clang)
+    _DETERMINE_GCC_SYSTEM_INCLUDE_DIRS(c _dirs _defines)
+    set(CMAKE_EXTRA_GENERATOR_C_SYSTEM_INCLUDE_DIRS "${_dirs}" CACHE INTERNAL "C compiler system include directories")
+    set(CMAKE_EXTRA_GENERATOR_C_SYSTEM_DEFINED_MACROS "${_defines}" CACHE INTERNAL "C compiler system defined macros")
+  elseif ("${CMAKE_C_COMPILER_ID}" MATCHES MSVC)
+    set(CMAKE_EXTRA_GENERATOR_C_SYSTEM_INCLUDE_DIRS "$ENV{INCLUDE}" CACHE INTERNAL "C compiler system include directories")
+  endif ()
+endif ()
+
+# And now the same for C++
+if (NOT CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_INCLUDE_DIRS)
+  if ("${CMAKE_CXX_COMPILER_ID}" MATCHES GNU  OR  "${CMAKE_CXX_COMPILER_ID}" MATCHES Intel  OR  "${CMAKE_CXX_COMPILER_ID}" MATCHES Clang)
+    _DETERMINE_GCC_SYSTEM_INCLUDE_DIRS(c++ _dirs _defines)
+    set(CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_INCLUDE_DIRS "${_dirs}" CACHE INTERNAL "CXX compiler system include directories")
+    set(CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_DEFINED_MACROS "${_defines}" CACHE INTERNAL "CXX compiler system defined macros")
+  elseif ("${CMAKE_CXX_COMPILER_ID}" MATCHES MSVC)
+    set(CMAKE_EXTRA_GENERATOR_CXX_SYSTEM_INCLUDE_DIRS "$ENV{INCLUDE}" CACHE INTERNAL "CXX compiler system include directories")
+  endif ()
+endif ()
+
+# Restore original LC_ALL, LC_MESSAGES, and LANG
+set(ENV{LC_ALL}      ${_orig_lc_all})
+set(ENV{LC_MESSAGES} ${_orig_lc_messages})
+set(ENV{LANG}        ${_orig_lang})
diff --git a/share/cmake-3.2/Modules/CMakeFindBinUtils.cmake b/share/cmake-3.6/Modules/CMakeFindBinUtils.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindBinUtils.cmake
rename to share/cmake-3.6/Modules/CMakeFindBinUtils.cmake
diff --git a/share/cmake-3.6/Modules/CMakeFindCodeBlocks.cmake b/share/cmake-3.6/Modules/CMakeFindCodeBlocks.cmake
new file mode 100644
index 0000000..bf85ea0
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeFindCodeBlocks.cmake
@@ -0,0 +1,40 @@
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file is included in CMakeSystemSpecificInformation.cmake if
+# the CodeBlocks extra generator has been selected.
+
+find_program(CMAKE_CODEBLOCKS_EXECUTABLE NAMES codeblocks DOC "The CodeBlocks executable")
+
+if(CMAKE_CODEBLOCKS_EXECUTABLE)
+   set(CMAKE_OPEN_PROJECT_COMMAND "${CMAKE_CODEBLOCKS_EXECUTABLE} <PROJECT_FILE>" )
+endif()
+
+# Determine builtin macros and include dirs:
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake)
+
+# Try to find out how many CPUs we have and set the -j argument for make accordingly
+set(_CMAKE_CODEBLOCKS_INITIAL_MAKE_ARGS "")
+
+include(ProcessorCount)
+processorcount(_CMAKE_CODEBLOCKS_PROCESSOR_COUNT)
+
+# Only set -j if we are under UNIX and if the make-tool used actually has "make" in the name
+# (we may also get here in the future e.g. for ninja)
+if("${_CMAKE_CODEBLOCKS_PROCESSOR_COUNT}" GREATER 1  AND  CMAKE_HOST_UNIX  AND  "${CMAKE_MAKE_PROGRAM}" MATCHES make)
+  set(_CMAKE_CODEBLOCKS_INITIAL_MAKE_ARGS "-j${_CMAKE_CODEBLOCKS_PROCESSOR_COUNT}")
+endif()
+
+# This variable is used by the CodeBlocks generator and appended to the make invocation commands.
+set(CMAKE_CODEBLOCKS_MAKE_ARGUMENTS "${_CMAKE_CODEBLOCKS_INITIAL_MAKE_ARGS}" CACHE STRING "Additional command line arguments when CodeBlocks invokes make. Enter e.g. -j<some_number> to get parallel builds")
diff --git a/share/cmake-3.2/Modules/CMakeFindDependencyMacro.cmake b/share/cmake-3.6/Modules/CMakeFindDependencyMacro.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindDependencyMacro.cmake
rename to share/cmake-3.6/Modules/CMakeFindDependencyMacro.cmake
diff --git a/share/cmake-3.6/Modules/CMakeFindEclipseCDT4.cmake b/share/cmake-3.6/Modules/CMakeFindEclipseCDT4.cmake
new file mode 100644
index 0000000..5bf738a
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeFindEclipseCDT4.cmake
@@ -0,0 +1,99 @@
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file is included in CMakeSystemSpecificInformation.cmake if
+# the Eclipse CDT4 extra generator has been selected.
+
+find_program(CMAKE_ECLIPSE_EXECUTABLE NAMES eclipse DOC "The Eclipse executable")
+
+function(_FIND_ECLIPSE_VERSION)
+  # This code is in a function so the variables used here have only local scope
+
+  # Set up a map with the names of the Eclipse releases:
+  set(_ECLIPSE_VERSION_NAME_    "Unknown" )
+  set(_ECLIPSE_VERSION_NAME_3.2 "Callisto" )
+  set(_ECLIPSE_VERSION_NAME_3.3 "Europa" )
+  set(_ECLIPSE_VERSION_NAME_3.4 "Ganymede" )
+  set(_ECLIPSE_VERSION_NAME_3.5 "Galileo" )
+  set(_ECLIPSE_VERSION_NAME_3.6 "Helios" )
+  set(_ECLIPSE_VERSION_NAME_3.7 "Indigo" )
+  set(_ECLIPSE_VERSION_NAME_4.2 "Juno" )
+  set(_ECLIPSE_VERSION_NAME_4.3 "Kepler" )
+  set(_ECLIPSE_VERSION_NAME_4.4 "Luna" )
+  set(_ECLIPSE_VERSION_NAME_4.5 "Mars" )
+
+  if(NOT DEFINED CMAKE_ECLIPSE_VERSION)
+    if(CMAKE_ECLIPSE_EXECUTABLE)
+      # use REALPATH to resolve symlinks (http://public.kitware.com/Bug/view.php?id=13036)
+      get_filename_component(_REALPATH_CMAKE_ECLIPSE_EXECUTABLE "${CMAKE_ECLIPSE_EXECUTABLE}" REALPATH)
+      get_filename_component(_ECLIPSE_DIR "${_REALPATH_CMAKE_ECLIPSE_EXECUTABLE}" PATH)
+      file(GLOB _ECLIPSE_FEATURE_DIR "${_ECLIPSE_DIR}/features/org.eclipse.platform*")
+      if(APPLE AND NOT _ECLIPSE_FEATURE_DIR)
+        file(GLOB _ECLIPSE_FEATURE_DIR "${_ECLIPSE_DIR}/../../../features/org.eclipse.platform*")
+      endif()
+      if("${_ECLIPSE_FEATURE_DIR}" MATCHES ".+org.eclipse.platform_([0-9]+\\.[0-9]+).+")
+        set(_ECLIPSE_VERSION ${CMAKE_MATCH_1})
+      endif()
+    endif()
+
+    if(_ECLIPSE_VERSION)
+      message(STATUS "Found Eclipse version ${_ECLIPSE_VERSION} (${_ECLIPSE_VERSION_NAME_${_ECLIPSE_VERSION}})")
+    else()
+      set(_ECLIPSE_VERSION "3.6" )
+      message(STATUS "Could not determine Eclipse version, assuming at least ${_ECLIPSE_VERSION} (${_ECLIPSE_VERSION_NAME_${_ECLIPSE_VERSION}}). Adjust CMAKE_ECLIPSE_VERSION if this is wrong.")
+    endif()
+
+    set(CMAKE_ECLIPSE_VERSION "${_ECLIPSE_VERSION} (${_ECLIPSE_VERSION_NAME_${_ECLIPSE_VERSION}})" CACHE STRING "The version of Eclipse. If Eclipse has not been found, 3.6 (Helios) is assumed.")
+  else()
+    message(STATUS "Eclipse version is set to ${CMAKE_ECLIPSE_VERSION}. Adjust CMAKE_ECLIPSE_VERSION if this is wrong.")
+  endif()
+
+  set_property(CACHE CMAKE_ECLIPSE_VERSION PROPERTY STRINGS "3.2 (${_ECLIPSE_VERSION_NAME_3.2})"
+                                                            "3.3 (${_ECLIPSE_VERSION_NAME_3.3})"
+                                                            "3.4 (${_ECLIPSE_VERSION_NAME_3.4})"
+                                                            "3.5 (${_ECLIPSE_VERSION_NAME_3.5})"
+                                                            "3.6 (${_ECLIPSE_VERSION_NAME_3.6})"
+                                                            "3.7 (${_ECLIPSE_VERSION_NAME_3.7})"
+                                                            "4.2 (${_ECLIPSE_VERSION_NAME_4.2})"
+                                                            "4.3 (${_ECLIPSE_VERSION_NAME_4.3})"
+                                                            "4.4 (${_ECLIPSE_VERSION_NAME_4.4})"
+                                                            "4.5 (${_ECLIPSE_VERSION_NAME_4.5})"
+              )
+endfunction()
+
+_find_eclipse_version()
+
+# Try to find out how many CPUs we have and set the -j argument for make accordingly
+set(_CMAKE_ECLIPSE_INITIAL_MAKE_ARGS "")
+
+include(ProcessorCount)
+processorcount(_CMAKE_ECLIPSE_PROCESSOR_COUNT)
+
+# Only set -j if we are under UNIX and if the make-tool used actually has "make" in the name
+# (we may also get here in the future e.g. for ninja)
+if("${_CMAKE_ECLIPSE_PROCESSOR_COUNT}" GREATER 1  AND  CMAKE_HOST_UNIX  AND  "${CMAKE_MAKE_PROGRAM}" MATCHES make)
+  set(_CMAKE_ECLIPSE_INITIAL_MAKE_ARGS "-j${_CMAKE_ECLIPSE_PROCESSOR_COUNT}")
+endif()
+
+# This variable is used by the Eclipse generator and appended to the make invocation commands.
+set(CMAKE_ECLIPSE_MAKE_ARGUMENTS "${_CMAKE_ECLIPSE_INITIAL_MAKE_ARGS}" CACHE STRING "Additional command line arguments when Eclipse invokes make. Enter e.g. -j<some_number> to get parallel builds")
+
+set(CMAKE_ECLIPSE_GENERATE_LINKED_RESOURCES TRUE CACHE BOOL "If disabled, CMake will not generate linked resource to the subprojects and to the source files within targets")
+
+# This variable is used by the Eclipse generator in out-of-source builds only.
+set(CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT FALSE CACHE BOOL "If enabled, CMake will generate a source project for Eclipse in CMAKE_SOURCE_DIR")
+mark_as_advanced(CMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT)
+
+# Determine builtin macros and include dirs:
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake)
diff --git a/share/cmake-3.2/Modules/CMakeFindFrameworks.cmake b/share/cmake-3.6/Modules/CMakeFindFrameworks.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindFrameworks.cmake
rename to share/cmake-3.6/Modules/CMakeFindFrameworks.cmake
diff --git a/share/cmake-3.2/Modules/CMakeFindJavaCommon.cmake b/share/cmake-3.6/Modules/CMakeFindJavaCommon.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindJavaCommon.cmake
rename to share/cmake-3.6/Modules/CMakeFindJavaCommon.cmake
diff --git a/share/cmake-3.2/Modules/CMakeFindKDevelop3.cmake b/share/cmake-3.6/Modules/CMakeFindKDevelop3.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindKDevelop3.cmake
rename to share/cmake-3.6/Modules/CMakeFindKDevelop3.cmake
diff --git a/share/cmake-3.2/Modules/CMakeFindKate.cmake b/share/cmake-3.6/Modules/CMakeFindKate.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindKate.cmake
rename to share/cmake-3.6/Modules/CMakeFindKate.cmake
diff --git a/share/cmake-3.2/Modules/CMakeFindPackageMode.cmake b/share/cmake-3.6/Modules/CMakeFindPackageMode.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindPackageMode.cmake
rename to share/cmake-3.6/Modules/CMakeFindPackageMode.cmake
diff --git a/share/cmake-3.2/Modules/CMakeFindWMake.cmake b/share/cmake-3.6/Modules/CMakeFindWMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindWMake.cmake
rename to share/cmake-3.6/Modules/CMakeFindWMake.cmake
diff --git a/share/cmake-3.2/Modules/CMakeFindXCode.cmake b/share/cmake-3.6/Modules/CMakeFindXCode.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFindXCode.cmake
rename to share/cmake-3.6/Modules/CMakeFindXCode.cmake
diff --git a/share/cmake-3.6/Modules/CMakeForceCompiler.cmake b/share/cmake-3.6/Modules/CMakeForceCompiler.cmake
new file mode 100644
index 0000000..d16d184
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeForceCompiler.cmake
@@ -0,0 +1,118 @@
+#.rst:
+# CMakeForceCompiler
+# ------------------
+#
+# Deprecated.  Do not use.
+#
+# The macros provided by this module were once intended for use by
+# cross-compiling toolchain files when CMake was not able to automatically
+# detect the compiler identification.  Since the introduction of this module,
+# CMake's compiler identification capabilities have improved and can now be
+# taught to recognize any compiler.  Furthermore, the suite of information
+# CMake detects from a compiler is now too extensive to be provided by
+# toolchain files using these macros.
+#
+# One common use case for this module was to skip CMake's checks for a
+# working compiler when using a cross-compiler that cannot link binaries
+# without special flags or custom linker scripts.  This case is now supported
+# by setting the :variable:`CMAKE_TRY_COMPILE_TARGET_TYPE` variable in the
+# toolchain file instead.
+#
+# -------------------------------------------------------------------------
+#
+# Macro CMAKE_FORCE_C_COMPILER has the following signature:
+#
+# ::
+#
+#    CMAKE_FORCE_C_COMPILER(<compiler> <compiler-id>)
+#
+# It sets CMAKE_C_COMPILER to the given compiler and the cmake internal
+# variable CMAKE_C_COMPILER_ID to the given compiler-id.  It also
+# bypasses the check for working compiler and basic compiler information
+# tests.
+#
+# Macro CMAKE_FORCE_CXX_COMPILER has the following signature:
+#
+# ::
+#
+#    CMAKE_FORCE_CXX_COMPILER(<compiler> <compiler-id>)
+#
+# It sets CMAKE_CXX_COMPILER to the given compiler and the cmake
+# internal variable CMAKE_CXX_COMPILER_ID to the given compiler-id.  It
+# also bypasses the check for working compiler and basic compiler
+# information tests.
+#
+# Macro CMAKE_FORCE_Fortran_COMPILER has the following signature:
+#
+# ::
+#
+#    CMAKE_FORCE_Fortran_COMPILER(<compiler> <compiler-id>)
+#
+# It sets CMAKE_Fortran_COMPILER to the given compiler and the cmake
+# internal variable CMAKE_Fortran_COMPILER_ID to the given compiler-id.
+# It also bypasses the check for working compiler and basic compiler
+# information tests.
+#
+# So a simple toolchain file could look like this:
+#
+# ::
+#
+#    include (CMakeForceCompiler)
+#    set(CMAKE_SYSTEM_NAME Generic)
+#    CMAKE_FORCE_C_COMPILER   (chc12 MetrowerksHicross)
+#    CMAKE_FORCE_CXX_COMPILER (chc12 MetrowerksHicross)
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+macro(CMAKE_FORCE_C_COMPILER compiler id)
+  message(DEPRECATION "The CMAKE_FORCE_C_COMPILER macro is deprecated.  "
+    "Instead just set CMAKE_C_COMPILER and allow CMake to identify the compiler.")
+  set(CMAKE_C_COMPILER "${compiler}")
+  set(CMAKE_C_COMPILER_ID_RUN TRUE)
+  set(CMAKE_C_COMPILER_ID ${id})
+  set(CMAKE_C_COMPILER_FORCED TRUE)
+
+  # Set old compiler id variables.
+  if(CMAKE_C_COMPILER_ID MATCHES "GNU")
+    set(CMAKE_COMPILER_IS_GNUCC 1)
+  endif()
+endmacro()
+
+macro(CMAKE_FORCE_CXX_COMPILER compiler id)
+  message(DEPRECATION "The CMAKE_FORCE_CXX_COMPILER macro is deprecated.  "
+    "Instead just set CMAKE_CXX_COMPILER and allow CMake to identify the compiler.")
+  set(CMAKE_CXX_COMPILER "${compiler}")
+  set(CMAKE_CXX_COMPILER_ID_RUN TRUE)
+  set(CMAKE_CXX_COMPILER_ID ${id})
+  set(CMAKE_CXX_COMPILER_FORCED TRUE)
+
+  # Set old compiler id variables.
+  if("${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU")
+    set(CMAKE_COMPILER_IS_GNUCXX 1)
+  endif()
+endmacro()
+
+macro(CMAKE_FORCE_Fortran_COMPILER compiler id)
+  message(DEPRECATION "The CMAKE_FORCE_Fortran_COMPILER macro is deprecated.  "
+    "Instead just set CMAKE_Fortran_COMPILER and allow CMake to identify the compiler.")
+  set(CMAKE_Fortran_COMPILER "${compiler}")
+  set(CMAKE_Fortran_COMPILER_ID_RUN TRUE)
+  set(CMAKE_Fortran_COMPILER_ID ${id})
+  set(CMAKE_Fortran_COMPILER_FORCED TRUE)
+
+  # Set old compiler id variables.
+  if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU")
+    set(CMAKE_COMPILER_IS_GNUG77 1)
+  endif()
+endmacro()
diff --git a/share/cmake-3.6/Modules/CMakeFortranCompiler.cmake.in b/share/cmake-3.6/Modules/CMakeFortranCompiler.cmake.in
new file mode 100644
index 0000000..2a4bea4
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeFortranCompiler.cmake.in
@@ -0,0 +1,59 @@
+set(CMAKE_Fortran_COMPILER "@CMAKE_Fortran_COMPILER@")
+set(CMAKE_Fortran_COMPILER_ARG1 "@CMAKE_Fortran_COMPILER_ARG1@")
+set(CMAKE_Fortran_COMPILER_ID "@CMAKE_Fortran_COMPILER_ID@")
+set(CMAKE_Fortran_COMPILER_VERSION "@CMAKE_Fortran_COMPILER_VERSION@")
+set(CMAKE_Fortran_COMPILER_WRAPPER "@CMAKE_Fortran_COMPILER_WRAPPER@")
+set(CMAKE_Fortran_PLATFORM_ID "@CMAKE_Fortran_PLATFORM_ID@")
+set(CMAKE_Fortran_SIMULATE_ID "@CMAKE_Fortran_SIMULATE_ID@")
+set(CMAKE_Fortran_SIMULATE_VERSION "@CMAKE_Fortran_SIMULATE_VERSION@")
+@SET_MSVC_Fortran_ARCHITECTURE_ID@
+set(CMAKE_AR "@CMAKE_AR@")
+set(CMAKE_RANLIB "@CMAKE_RANLIB@")
+set(CMAKE_COMPILER_IS_GNUG77 @CMAKE_COMPILER_IS_GNUG77@)
+set(CMAKE_Fortran_COMPILER_LOADED 1)
+set(CMAKE_Fortran_COMPILER_WORKS @CMAKE_Fortran_COMPILER_WORKS@)
+set(CMAKE_Fortran_ABI_COMPILED @CMAKE_Fortran_ABI_COMPILED@)
+set(CMAKE_COMPILER_IS_MINGW @CMAKE_COMPILER_IS_MINGW@)
+set(CMAKE_COMPILER_IS_CYGWIN @CMAKE_COMPILER_IS_CYGWIN@)
+if(CMAKE_COMPILER_IS_CYGWIN)
+  set(CYGWIN 1)
+  set(UNIX 1)
+endif()
+
+set(CMAKE_Fortran_COMPILER_ENV_VAR "FC")
+
+set(CMAKE_Fortran_COMPILER_SUPPORTS_F90 @CMAKE_Fortran_COMPILER_SUPPORTS_F90@)
+
+if(CMAKE_COMPILER_IS_MINGW)
+  set(MINGW 1)
+endif()
+set(CMAKE_Fortran_COMPILER_ID_RUN 1)
+set(CMAKE_Fortran_SOURCE_FILE_EXTENSIONS f;F;f77;F77;f90;F90;for;For;FOR;f95;F95)
+set(CMAKE_Fortran_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
+set(CMAKE_Fortran_LINKER_PREFERENCE 20)
+if(UNIX)
+  set(CMAKE_Fortran_OUTPUT_EXTENSION .o)
+else()
+  set(CMAKE_Fortran_OUTPUT_EXTENSION .obj)
+endif()
+
+# Save compiler ABI information.
+set(CMAKE_Fortran_SIZEOF_DATA_PTR "@CMAKE_Fortran_SIZEOF_DATA_PTR@")
+set(CMAKE_Fortran_COMPILER_ABI "@CMAKE_Fortran_COMPILER_ABI@")
+set(CMAKE_Fortran_LIBRARY_ARCHITECTURE "@CMAKE_Fortran_LIBRARY_ARCHITECTURE@")
+
+if(CMAKE_Fortran_SIZEOF_DATA_PTR AND NOT CMAKE_SIZEOF_VOID_P)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_Fortran_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_Fortran_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_Fortran_COMPILER_ABI}")
+endif()
+
+if(CMAKE_Fortran_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "@CMAKE_Fortran_LIBRARY_ARCHITECTURE@")
+endif()
+
+set(CMAKE_Fortran_IMPLICIT_LINK_LIBRARIES "@CMAKE_Fortran_IMPLICIT_LINK_LIBRARIES@")
+set(CMAKE_Fortran_IMPLICIT_LINK_DIRECTORIES "@CMAKE_Fortran_IMPLICIT_LINK_DIRECTORIES@")
+set(CMAKE_Fortran_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "@CMAKE_Fortran_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES@")
diff --git a/share/cmake-3.2/Modules/CMakeFortranCompilerABI.F b/share/cmake-3.6/Modules/CMakeFortranCompilerABI.F
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeFortranCompilerABI.F
rename to share/cmake-3.6/Modules/CMakeFortranCompilerABI.F
diff --git a/share/cmake-3.6/Modules/CMakeFortranCompilerId.F.in b/share/cmake-3.6/Modules/CMakeFortranCompilerId.F.in
new file mode 100644
index 0000000..67cda3b
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeFortranCompilerId.F.in
@@ -0,0 +1,208 @@
+      PROGRAM CMakeFortranCompilerId
+#if 0
+! Identify the compiler
+#endif
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+        PRINT *, 'INFO:compiler[Intel]'
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+# if defined(__INTEL_COMPILER_UPDATE)
+#  define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+# else
+#  define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+
+# if defined(_MSC_VER)
+        PRINT *, 'INFO:simulate[MSVC]'
+#  if _MSC_VER >= 1900
+        PRINT *, 'INFO:simulate_version[019.00]'
+#  elif _MSC_VER >= 1800
+        PRINT *, 'INFO:simulate_version[018.00]'
+#  elif _MSC_VER >= 1700
+        PRINT *, 'INFO:simulate_version[017.00]'
+#  elif _MSC_VER >= 1600
+        PRINT *, 'INFO:simulate_version[016.00]'
+#  elif _MSC_VER >= 1500
+        PRINT *, 'INFO:simulate_version[015.00]'
+#  elif _MSC_VER >= 1400
+        PRINT *, 'INFO:simulate_version[014.00]'
+#  elif _MSC_VER >= 1310
+        PRINT *, 'INFO:simulate_version[013.01]'
+#  else
+        PRINT *, 'INFO:simulate_version[013.00]'
+#  endif
+# endif
+#elif defined(__SUNPRO_F95)
+        PRINT *, 'INFO:compiler[SunPro]'
+# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_F95>>8)
+# define COMPILER_VERSION_MINOR HEX(__SUNPRO_F95>>4 & 0xF)
+# define COMPILER_VERSION_PATCH HEX(__SUNPRO_F95    & 0xF)
+#elif defined(__SUNPRO_F90)
+        PRINT *, 'INFO:compiler[SunPro]'
+# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_F90>>8)
+# define COMPILER_VERSION_MINOR HEX(__SUNPRO_F90>>4 & 0xF)
+# define COMPILER_VERSION_PATCH HEX(__SUNPRO_F90    & 0xF)
+#elif defined(_CRAYFTN)
+        PRINT *, 'INFO:compiler[Cray]'
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+#elif defined(__G95__)
+        PRINT *, 'INFO:compiler[G95]'
+# define COMPILER_VERSION_MAJOR DEC(__G95__)
+# define COMPILER_VERSION_MINOR DEC(__G95_MINOR__)
+#elif defined(__PATHSCALE__)
+        PRINT *, 'INFO:compiler[PathScale]'
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+#elif defined(__ABSOFT__)
+        PRINT *, 'INFO:compiler[Absoft]'
+#elif defined(__GNUC__)
+        PRINT *, 'INFO:compiler[GNU]'
+# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+#elif defined(__IBMC__)
+# if defined(__COMPILER_VER__)
+        PRINT *, 'INFO:compiler[zOS]'
+# elif __IBMC__ >= 800
+        PRINT *, 'INFO:compiler[XL]'
+#  define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+#  define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+#  define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+# else
+        PRINT *, 'INFO:compiler[VisualAge]'
+#  define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+#  define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+#  define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+# endif
+#elif defined(__PGI)
+        PRINT *, 'INFO:compiler[PGI]'
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+#elif defined(_SGI_COMPILER_VERSION) || defined(_COMPILER_VERSION)
+        PRINT *, 'INFO:compiler[MIPSpro]'
+#       if 0
+!       This compiler is either not known or is too old to define an
+!       identification macro.  Try to identify the platform and guess that
+!       it is the native compiler.
+#       endif
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+        PRINT *, 'INFO:compiler[VisualAge]'
+#elif defined(__sgi) || defined(__sgi__) || defined(_SGI)
+        PRINT *, 'INFO:compiler[MIPSpro]'
+#elif defined(__hpux) || defined(__hpux__)
+        PRINT *, 'INFO:compiler[HP]'
+#elif 1
+#       if 0
+!       The above 'elif 1' instead of 'else' is to work around a bug in the
+!       SGI preprocessor which produces both the __sgi and else blocks.
+#       endif
+        PRINT *, 'INFO:compiler[]'
+#endif
+#if defined(__CRAYXE) || defined(__CRAYXC)
+        PRINT *, 'INFO:compiler_wrapper[CrayPrgEnv]'
+#endif
+
+#if 0
+! Identify the platform
+#endif
+#if defined(__linux) || defined(__linux__) || defined(linux)
+        PRINT *, 'INFO:platform[Linux]'
+#elif defined(__CYGWIN__)
+        PRINT *, 'INFO:platform[Cygwin]'
+#elif defined(__MINGW32__)
+        PRINT *, 'INFO:platform[MinGW]'
+#elif defined(__APPLE__)
+        PRINT *, 'INFO:platform[Darwin]'
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+        PRINT *, 'INFO:platform[Windows]'
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+        PRINT *, 'INFO:platform[FreeBSD]'
+#elif defined(__NetBSD__) || defined(__NetBSD)
+        PRINT *, 'INFO:platform[NetBSD]'
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+        PRINT *, 'INFO:platform[OpenBSD]'
+#elif defined(__sun) || defined(sun)
+        PRINT *, 'INFO:platform[SunOS]'
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+        PRINT *, 'INFO:platform[AIX]'
+#elif defined(__sgi) || defined(__sgi__) || defined(_SGI)
+        PRINT *, 'INFO:platform[IRIX]'
+#elif defined(__hpux) || defined(__hpux__)
+        PRINT *, 'INFO:platform[HP-UX]'
+#elif defined(__HAIKU__)
+        PRINT *, 'INFO:platform[Haiku]'
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+        PRINT *, 'INFO:platform[BeOS]'
+#elif defined(__QNX__) || defined(__QNXNTO__)
+        PRINT *, 'INFO:platform[QNX]'
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+        PRINT *, 'INFO:platform[Tru64]'
+#elif defined(__riscos) || defined(__riscos__)
+        PRINT *, 'INFO:platform[RISCos]'
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+        PRINT *, 'INFO:platform[SINIX]'
+#elif defined(__UNIX_SV__)
+        PRINT *, 'INFO:platform[UNIX_SV]'
+#elif defined(__bsdos__)
+        PRINT *, 'INFO:platform[BSDOS]'
+#elif defined(_MPRAS) || defined(MPRAS)
+        PRINT *, 'INFO:platform[MP-RAS]'
+#elif defined(__osf) || defined(__osf__)
+        PRINT *, 'INFO:platform[OSF1]'
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+        PRINT *, 'INFO:platform[SCO_SV]'
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+        PRINT *, 'INFO:platform[ULTRIX]'
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+        PRINT *, 'INFO:platform[Xenix]'
+#elif 1
+#       if 0
+!       The above 'elif 1' instead of 'else' is to work around a bug in the
+!       SGI preprocessor which produces both the __sgi and else blocks.
+#       endif
+        PRINT *, 'INFO:platform[]'
+#endif
+#if defined(_WIN32) && (defined(__INTEL_COMPILER) || defined(__ICC))
+# if defined(_M_IA64)
+        PRINT *, 'INFO:arch[IA64]'
+# elif defined(_M_X64) || defined(_M_AMD64)
+        PRINT *, 'INFO:arch[x64]'
+# elif defined(_M_IX86)
+        PRINT *, 'INFO:arch[X86]'
+# endif
+#endif
+
+#if 0
+! Encode compiler version digits
+#endif
+#define DEC_8(n) (((n) / 10000000) % 10)
+#define DEC_7(n) (((n) / 1000000)  % 10)
+#define DEC_6(n) (((n) / 100000)   % 10)
+#define DEC_5(n) (((n) / 10000)    % 10)
+#define DEC_4(n) (((n) / 1000)     % 10)
+#define DEC_3(n) (((n) / 100)      % 10)
+#define DEC_2(n) (((n) / 10)       % 10)
+#define DEC_1(n) (((n)    )        % 10)
+#define HEX_8(n) ((n)>>28 & 0xF)
+#define HEX_7(n) ((n)>>24 & 0xF)
+#define HEX_6(n) ((n)>>20 & 0xF)
+#define HEX_5(n) ((n)>>16 & 0xF)
+#define HEX_4(n) ((n)>>12 & 0xF)
+#define HEX_3(n) ((n)>>8  & 0xF)
+#define HEX_2(n) ((n)>>4  & 0xF)
+#define HEX_1(n) ((n)     & 0xF)
+@CMAKE_Fortran_COMPILER_ID_VERSION_INFO@
+
+      END
diff --git a/share/cmake-3.6/Modules/CMakeFortranInformation.cmake b/share/cmake-3.6/Modules/CMakeFortranInformation.cmake
new file mode 100644
index 0000000..1fd0972
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeFortranInformation.cmake
@@ -0,0 +1,253 @@
+
+#=============================================================================
+# Copyright 2004-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(CMakeLanguageInformation)
+
+# This file sets the basic flags for the Fortran language in CMake.
+# It also loads the available platform file for the system-compiler
+# if it exists.
+
+set(_INCLUDED_FILE 0)
+
+# Load compiler-specific information.
+if(CMAKE_Fortran_COMPILER_ID)
+  include(Compiler/${CMAKE_Fortran_COMPILER_ID}-Fortran OPTIONAL)
+endif()
+
+set(CMAKE_BASE_NAME)
+get_filename_component(CMAKE_BASE_NAME "${CMAKE_Fortran_COMPILER}" NAME_WE)
+# since the gnu compiler has several names force g++
+if(CMAKE_COMPILER_IS_GNUG77)
+  set(CMAKE_BASE_NAME g77)
+endif()
+if(CMAKE_Fortran_COMPILER_ID)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_Fortran_COMPILER_ID}-Fortran OPTIONAL RESULT_VARIABLE _INCLUDED_FILE)
+endif()
+if (NOT _INCLUDED_FILE)
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL
+          RESULT_VARIABLE _INCLUDED_FILE)
+endif ()
+
+# load any compiler-wrapper specific information
+if (CMAKE_Fortran_COMPILER_WRAPPER)
+  __cmake_include_compiler_wrapper(Fortran)
+endif ()
+
+# We specify the compiler information in the system file for some
+# platforms, but this language may not have been enabled when the file
+# was first included.  Include it again to get the language info.
+# Remove this when all compiler info is removed from system files.
+if (NOT _INCLUDED_FILE)
+  include(Platform/${CMAKE_SYSTEM_NAME} OPTIONAL)
+endif ()
+
+if(CMAKE_Fortran_SIZEOF_DATA_PTR)
+  foreach(f ${CMAKE_Fortran_ABI_FILES})
+    include(${f})
+  endforeach()
+  unset(CMAKE_Fortran_ABI_FILES)
+endif()
+
+# This should be included before the _INIT variables are
+# used to initialize the cache.  Since the rule variables
+# have if blocks on them, users can still define them here.
+# But, it should still be after the platform file so changes can
+# be made to those values.
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_override}")
+endif()
+
+if(CMAKE_USER_MAKE_RULES_OVERRIDE_Fortran)
+  # Save the full path of the file so try_compile can use it.
+  include(${CMAKE_USER_MAKE_RULES_OVERRIDE_Fortran} RESULT_VARIABLE _override)
+  set(CMAKE_USER_MAKE_RULES_OVERRIDE_Fortran "${_override}")
+endif()
+
+
+# Fortran needs cmake to do a requires step during its build process to
+# catch any modules
+set(CMAKE_NEEDS_REQUIRES_STEP_Fortran_FLAG 1)
+
+if(NOT CMAKE_Fortran_COMPILE_OPTIONS_PIC)
+  set(CMAKE_Fortran_COMPILE_OPTIONS_PIC ${CMAKE_C_COMPILE_OPTIONS_PIC})
+endif()
+
+if(NOT CMAKE_Fortran_COMPILE_OPTIONS_PIE)
+  set(CMAKE_Fortran_COMPILE_OPTIONS_PIE ${CMAKE_C_COMPILE_OPTIONS_PIE})
+endif()
+
+if(NOT CMAKE_Fortran_COMPILE_OPTIONS_DLL)
+  set(CMAKE_Fortran_COMPILE_OPTIONS_DLL ${CMAKE_C_COMPILE_OPTIONS_DLL})
+endif()
+
+# Create a set of shared library variable specific to Fortran
+# For 90% of the systems, these are the same flags as the C versions
+# so if these are not set just copy the flags from the c version
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS)
+  set(CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_Fortran_FLAGS)
+  set(CMAKE_SHARED_LIBRARY_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_C_FLAGS})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_Fortran_FLAGS)
+  set(CMAKE_SHARED_LIBRARY_LINK_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_LINK_C_FLAGS})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG)
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP)
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_RPATH_LINK_Fortran_FLAG)
+  set(CMAKE_SHARED_LIBRARY_RPATH_LINK_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_EXE_EXPORTS_Fortran_FLAG)
+  set(CMAKE_EXE_EXPORTS_Fortran_FLAG ${CMAKE_EXE_EXPORTS_C_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG)
+  set(CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_SONAME_C_FLAG})
+endif()
+
+# for most systems a module is the same as a shared library
+# so unless the variable CMAKE_MODULE_EXISTS is set just
+# copy the values from the LIBRARY variables
+if(NOT CMAKE_MODULE_EXISTS)
+  set(CMAKE_SHARED_MODULE_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_Fortran_FLAGS})
+  set(CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS})
+endif()
+
+# repeat for modules
+if(NOT DEFINED CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS)
+  set(CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS ${CMAKE_SHARED_MODULE_CREATE_C_FLAGS})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_MODULE_Fortran_FLAGS)
+  set(CMAKE_SHARED_MODULE_Fortran_FLAGS ${CMAKE_SHARED_MODULE_C_FLAGS})
+endif()
+
+if(NOT DEFINED CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG)
+  set(CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG_SEP)
+  set(CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG_SEP ${CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP})
+endif()
+
+if(NOT DEFINED CMAKE_EXECUTABLE_RPATH_LINK_Fortran_FLAG)
+  set(CMAKE_EXECUTABLE_RPATH_LINK_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RPATH_LINK_Fortran_FLAG})
+endif()
+
+if(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_Fortran_WITH_RUNTIME_PATH)
+  set(CMAKE_SHARED_LIBRARY_LINK_Fortran_WITH_RUNTIME_PATH ${CMAKE_SHARED_LIBRARY_LINK_C_WITH_RUNTIME_PATH})
+endif()
+
+if(NOT CMAKE_INCLUDE_FLAG_Fortran)
+  set(CMAKE_INCLUDE_FLAG_Fortran ${CMAKE_INCLUDE_FLAG_C})
+endif()
+
+if(NOT CMAKE_INCLUDE_FLAG_SEP_Fortran)
+  set(CMAKE_INCLUDE_FLAG_SEP_Fortran ${CMAKE_INCLUDE_FLAG_SEP_C})
+endif()
+
+set(CMAKE_VERBOSE_MAKEFILE FALSE CACHE BOOL "If this value is on, makefiles will be generated without the .SILENT directive, and all commands will be echoed to the console during the make.  This is useful for debugging only. With Visual Studio IDE projects all commands are done without /nologo.")
+
+set(CMAKE_Fortran_FLAGS_INIT "$ENV{FFLAGS} ${CMAKE_Fortran_FLAGS_INIT}")
+# avoid just having a space as the initial value for the cache
+if(CMAKE_Fortran_FLAGS_INIT STREQUAL " ")
+  set(CMAKE_Fortran_FLAGS_INIT)
+endif()
+set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS_INIT}" CACHE STRING
+     "Flags for Fortran compiler.")
+
+include(CMakeCommonLanguageInclude)
+
+# now define the following rule variables
+# CMAKE_Fortran_CREATE_SHARED_LIBRARY
+# CMAKE_Fortran_CREATE_SHARED_MODULE
+# CMAKE_Fortran_COMPILE_OBJECT
+# CMAKE_Fortran_LINK_EXECUTABLE
+
+# create a Fortran shared library
+if(NOT CMAKE_Fortran_CREATE_SHARED_LIBRARY)
+  set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
+      "<CMAKE_Fortran_COMPILER> <CMAKE_SHARED_LIBRARY_Fortran_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS> <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
+endif()
+
+# create a Fortran shared module just copy the shared library rule
+if(NOT CMAKE_Fortran_CREATE_SHARED_MODULE)
+  set(CMAKE_Fortran_CREATE_SHARED_MODULE ${CMAKE_Fortran_CREATE_SHARED_LIBRARY})
+endif()
+
+# Create a static archive incrementally for large object file counts.
+# If CMAKE_Fortran_CREATE_STATIC_LIBRARY is set it will override these.
+if(NOT DEFINED CMAKE_Fortran_ARCHIVE_CREATE)
+  set(CMAKE_Fortran_ARCHIVE_CREATE "<CMAKE_AR> qc <TARGET> <LINK_FLAGS> <OBJECTS>")
+endif()
+if(NOT DEFINED CMAKE_Fortran_ARCHIVE_APPEND)
+  set(CMAKE_Fortran_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
+endif()
+if(NOT DEFINED CMAKE_Fortran_ARCHIVE_FINISH)
+  set(CMAKE_Fortran_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
+endif()
+
+# compile a Fortran file into an object file
+# (put -o after -c to workaround bug in at least one mpif77 wrapper)
+if(NOT CMAKE_Fortran_COMPILE_OBJECT)
+  set(CMAKE_Fortran_COMPILE_OBJECT
+    "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -c <SOURCE> -o <OBJECT>")
+endif()
+
+# link a fortran program
+if(NOT CMAKE_Fortran_LINK_EXECUTABLE)
+  set(CMAKE_Fortran_LINK_EXECUTABLE
+    "<CMAKE_Fortran_COMPILER> <CMAKE_Fortran_LINK_FLAGS> <LINK_FLAGS> <FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+endif()
+
+if(CMAKE_Fortran_STANDARD_LIBRARIES_INIT)
+  set(CMAKE_Fortran_STANDARD_LIBRARIES "${CMAKE_Fortran_STANDARD_LIBRARIES_INIT}"
+    CACHE STRING "Libraries linked by default with all Fortran applications.")
+  mark_as_advanced(CMAKE_Fortran_STANDARD_LIBRARIES)
+endif()
+
+if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
+  set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG_INIT}" CACHE STRING
+     "Flags used by the compiler during debug builds.")
+  set (CMAKE_Fortran_FLAGS_MINSIZEREL "${CMAKE_Fortran_FLAGS_MINSIZEREL_INIT}" CACHE STRING
+     "Flags used by the compiler during release builds for minimum size.")
+  set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE_INIT}" CACHE STRING
+     "Flags used by the compiler during release builds.")
+  set (CMAKE_Fortran_FLAGS_RELWITHDEBINFO "${CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
+     "Flags used by the compiler during release builds with debug info.")
+
+endif()
+
+mark_as_advanced(
+CMAKE_Fortran_FLAGS
+CMAKE_Fortran_FLAGS_DEBUG
+CMAKE_Fortran_FLAGS_MINSIZEREL
+CMAKE_Fortran_FLAGS_RELEASE
+CMAKE_Fortran_FLAGS_RELWITHDEBINFO)
+
+# set this variable so we can avoid loading this more than once.
+set(CMAKE_Fortran_INFORMATION_LOADED 1)
diff --git a/share/cmake-3.6/Modules/CMakeGenericSystem.cmake b/share/cmake-3.6/Modules/CMakeGenericSystem.cmake
new file mode 100644
index 0000000..5ae757d
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeGenericSystem.cmake
@@ -0,0 +1,190 @@
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(CMAKE_SHARED_LIBRARY_C_FLAGS "")            # -pic
+set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared")       # -shared
+set(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")         # +s, flag for exe link to use shared lib
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "")       # -rpath
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP "")   # : or empty
+set(CMAKE_INCLUDE_FLAG_C "-I")       # -I
+set(CMAKE_INCLUDE_FLAG_C_SEP "")     # , or empty
+set(CMAKE_LIBRARY_PATH_FLAG "-L")
+set(CMAKE_LIBRARY_PATH_TERMINATOR "")  # for the Digital Mars D compiler the link paths have to be terminated with a "/"
+set(CMAKE_LINK_LIBRARY_FLAG "-l")
+
+set(CMAKE_LINK_LIBRARY_SUFFIX "")
+set(CMAKE_STATIC_LIBRARY_PREFIX "lib")
+set(CMAKE_STATIC_LIBRARY_SUFFIX ".a")
+set(CMAKE_SHARED_LIBRARY_PREFIX "lib")          # lib
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".so")          # .so
+set(CMAKE_EXECUTABLE_SUFFIX "")          # .exe
+set(CMAKE_DL_LIBS "dl")
+
+set(CMAKE_FIND_LIBRARY_PREFIXES "lib")
+set(CMAKE_FIND_LIBRARY_SUFFIXES ".so" ".a")
+
+# basically all general purpose OSs support shared libs
+set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS TRUE)
+
+set (CMAKE_SKIP_RPATH "NO" CACHE BOOL
+     "If set, runtime paths are not added when using shared libraries.")
+set (CMAKE_SKIP_INSTALL_RPATH "NO" CACHE BOOL
+     "If set, runtime paths are not added when installing shared libraries, but are added when building.")
+
+set(CMAKE_VERBOSE_MAKEFILE FALSE CACHE BOOL "If this value is on, makefiles will be generated without the .SILENT directive, and all commands will be echoed to the console during the make.  This is useful for debugging only. With Visual Studio IDE projects all commands are done without /nologo.")
+
+if(CMAKE_GENERATOR MATCHES "Make")
+  set(CMAKE_COLOR_MAKEFILE ON CACHE BOOL
+    "Enable/Disable color output during build."
+    )
+  mark_as_advanced(CMAKE_COLOR_MAKEFILE)
+  if(DEFINED CMAKE_RULE_MESSAGES)
+    set_property(GLOBAL PROPERTY RULE_MESSAGES ${CMAKE_RULE_MESSAGES})
+  endif()
+  if(DEFINED CMAKE_TARGET_MESSAGES)
+    set_property(GLOBAL PROPERTY TARGET_MESSAGES ${CMAKE_TARGET_MESSAGES})
+  endif()
+  if(CMAKE_GENERATOR MATCHES "Unix Makefiles")
+    set(CMAKE_EXPORT_COMPILE_COMMANDS OFF CACHE BOOL
+      "Enable/Disable output of compile commands during generation."
+      )
+    mark_as_advanced(CMAKE_EXPORT_COMPILE_COMMANDS)
+  endif()
+endif()
+
+if(CMAKE_GENERATOR MATCHES "Ninja")
+  set(CMAKE_EXPORT_COMPILE_COMMANDS OFF CACHE BOOL
+    "Enable/Disable output of compile commands during generation."
+    )
+  mark_as_advanced(CMAKE_EXPORT_COMPILE_COMMANDS)
+endif()
+
+# GetDefaultWindowsPrefixBase
+#
+# Compute the base directory for CMAKE_INSTALL_PREFIX based on:
+#  - is this 32-bit or 64-bit Windows
+#  - is this 32-bit or 64-bit CMake running
+#  - what architecture targets will be built
+#
+function(GetDefaultWindowsPrefixBase var)
+
+  # Try to guess what architecture targets will end up being built as,
+  # even if CMAKE_SIZEOF_VOID_P is not computed yet... We need to know
+  # the architecture of the targets being built to choose the right
+  # default value for CMAKE_INSTALL_PREFIX.
+  #
+  if("${CMAKE_GENERATOR}" MATCHES "(Win64|IA64)")
+    set(arch_hint "x64")
+  elseif("${CMAKE_GENERATOR}" MATCHES "ARM")
+    set(arch_hint "ARM")
+  elseif("${CMAKE_SIZEOF_VOID_P}" STREQUAL "8")
+    set(arch_hint "x64")
+  elseif("$ENV{LIB}" MATCHES "(amd64|ia64)")
+    set(arch_hint "x64")
+  endif()
+
+  if(NOT arch_hint)
+    set(arch_hint "x86")
+  endif()
+
+  # default env in a 64-bit app on Win64:
+  # ProgramFiles=C:\Program Files
+  # ProgramFiles(x86)=C:\Program Files (x86)
+  # ProgramW6432=C:\Program Files
+  #
+  # default env in a 32-bit app on Win64:
+  # ProgramFiles=C:\Program Files (x86)
+  # ProgramFiles(x86)=C:\Program Files (x86)
+  # ProgramW6432=C:\Program Files
+  #
+  # default env in a 32-bit app on Win32:
+  # ProgramFiles=C:\Program Files
+  # ProgramFiles(x86) NOT DEFINED
+  # ProgramW6432 NOT DEFINED
+
+  # By default, use the ProgramFiles env var as the base value of
+  # CMAKE_INSTALL_PREFIX:
+  #
+  set(_PREFIX_ENV_VAR "ProgramFiles")
+
+  if ("$ENV{ProgramW6432}" STREQUAL "")
+    # running on 32-bit Windows
+    # must be a 32-bit CMake, too...
+    #message("guess: this is a 32-bit CMake running on 32-bit Windows")
+  else()
+    # running on 64-bit Windows
+    if ("$ENV{ProgramW6432}" STREQUAL "$ENV{ProgramFiles}")
+      # 64-bit CMake
+      #message("guess: this is a 64-bit CMake running on 64-bit Windows")
+      if(NOT "${arch_hint}" STREQUAL "x64")
+      # building 32-bit targets
+        set(_PREFIX_ENV_VAR "ProgramFiles(x86)")
+      endif()
+    else()
+      # 32-bit CMake
+      #message("guess: this is a 32-bit CMake running on 64-bit Windows")
+      if("${arch_hint}" STREQUAL "x64")
+      # building 64-bit targets
+        set(_PREFIX_ENV_VAR "ProgramW6432")
+      endif()
+    endif()
+  endif()
+
+  #if("${arch_hint}" STREQUAL "x64")
+  #  message("guess: you are building a 64-bit app")
+  #else()
+  #  message("guess: you are building a 32-bit app")
+  #endif()
+
+  if(NOT "$ENV{${_PREFIX_ENV_VAR}}" STREQUAL "")
+    file(TO_CMAKE_PATH "$ENV{${_PREFIX_ENV_VAR}}" _base)
+  elseif(NOT "$ENV{SystemDrive}" STREQUAL "")
+    set(_base "$ENV{SystemDrive}/Program Files")
+  else()
+    set(_base "C:/Program Files")
+  endif()
+
+  set(${var} "${_base}" PARENT_SCOPE)
+endfunction()
+
+
+# Set a variable to indicate whether the value of CMAKE_INSTALL_PREFIX
+# was initialized by the block below.  This is useful for user
+# projects to change the default prefix while still allowing the
+# command line to override it.
+if(NOT DEFINED CMAKE_INSTALL_PREFIX)
+  set(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT 1)
+endif()
+
+# Choose a default install prefix for this platform.
+if(CMAKE_HOST_UNIX)
+  set(CMAKE_INSTALL_PREFIX "/usr/local"
+    CACHE PATH "Install path prefix, prepended onto install directories.")
+else()
+  GetDefaultWindowsPrefixBase(CMAKE_GENERIC_PROGRAM_FILES)
+  set(CMAKE_INSTALL_PREFIX
+    "${CMAKE_GENERIC_PROGRAM_FILES}/${PROJECT_NAME}"
+    CACHE PATH "Install path prefix, prepended onto install directories.")
+  set(CMAKE_GENERIC_PROGRAM_FILES)
+endif()
+
+# Set a variable which will be used as component name in install() commands
+# where no COMPONENT has been given:
+set(CMAKE_INSTALL_DEFAULT_COMPONENT_NAME "Unspecified")
+
+mark_as_advanced(
+  CMAKE_SKIP_RPATH
+  CMAKE_SKIP_INSTALL_RPATH
+  CMAKE_VERBOSE_MAKEFILE
+)
diff --git a/share/cmake-3.6/Modules/CMakeGraphVizOptions.cmake b/share/cmake-3.6/Modules/CMakeGraphVizOptions.cmake
new file mode 100644
index 0000000..ff18267
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeGraphVizOptions.cmake
@@ -0,0 +1,123 @@
+#.rst:
+# CMakeGraphVizOptions
+# --------------------
+#
+# The builtin graphviz support of CMake.
+#
+# Variables specific to the graphviz support
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# CMake
+# can generate graphviz files, showing the dependencies between the
+# targets in a project and also external libraries which are linked
+# against.  When CMake is run with the --graphviz=foo option, it will
+# produce
+#
+# * a foo.dot file showing all dependencies in the project
+# * a foo.dot.<target> file for each target, file showing on which other targets the respective target depends
+# * a foo.dot.<target>.dependers file, showing which other targets depend on the respective target
+#
+# This can result in huge graphs.  Using the file
+# CMakeGraphVizOptions.cmake the look and content of the generated
+# graphs can be influenced.  This file is searched first in
+# ${CMAKE_BINARY_DIR} and then in ${CMAKE_SOURCE_DIR}.  If found, it is
+# read and the variables set in it are used to adjust options for the
+# generated graphviz files.
+#
+# .. variable:: GRAPHVIZ_GRAPH_TYPE
+#
+#  The graph type
+#
+#  * Mandatory : NO
+#  * Default   : "digraph"
+#
+# .. variable:: GRAPHVIZ_GRAPH_NAME
+#
+#  The graph name.
+#
+#  * Mandatory : NO
+#  * Default   : "GG"
+#
+# .. variable:: GRAPHVIZ_GRAPH_HEADER
+#
+#  The header written at the top of the graphviz file.
+#
+#  * Mandatory : NO
+#  * Default   : "node [n  fontsize = "12"];"
+#
+# .. variable:: GRAPHVIZ_NODE_PREFIX
+#
+#  The prefix for each node in the graphviz file.
+#
+#  * Mandatory : NO
+#  * Default   : "node"
+#
+# .. variable:: GRAPHVIZ_EXECUTABLES
+#
+#  Set this to FALSE to exclude executables from the generated graphs.
+#
+#  * Mandatory : NO
+#  * Default   : TRUE
+#
+# .. variable:: GRAPHVIZ_STATIC_LIBS
+#
+#  Set this to FALSE to exclude static libraries from the generated graphs.
+#
+#  * Mandatory : NO
+#  * Default   : TRUE
+#
+# .. variable:: GRAPHVIZ_SHARED_LIBS
+#
+#  Set this to FALSE to exclude shared libraries from the generated graphs.
+#
+#  * Mandatory : NO
+#  * Default   : TRUE
+#
+# .. variable:: GRAPHVIZ_MODULE_LIBS
+#
+#  Set this to FALSE to exclude module libraries from the generated graphs.
+#
+#  * Mandatory : NO
+#  * Default   : TRUE
+#
+# .. variable:: GRAPHVIZ_EXTERNAL_LIBS
+#
+#  Set this to FALSE to exclude external libraries from the generated graphs.
+#
+#  * Mandatory : NO
+#  * Default   : TRUE
+#
+# .. variable:: GRAPHVIZ_IGNORE_TARGETS
+#
+#  A list of regular expressions for ignoring targets.
+#
+#  * Mandatory : NO
+#  * Default   : empty
+#
+# .. variable:: GRAPHVIZ_GENERATE_PER_TARGET
+#
+#  Set this to FALSE to exclude per target graphs ``foo.dot.<target>``.
+#
+#  * Mandatory : NO
+#  * Default   : TRUE
+#
+# .. variable:: GRAPHVIZ_GENERATE_DEPENDERS
+#
+#  Set this to FALSE to exclude depender graphs ``foo.dot.<target>.dependers``.
+#
+#  * Mandatory : NO
+#  * Default   : TRUE
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+# Copyright 2013 Alexander Neundorf <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
diff --git a/share/cmake-3.6/Modules/CMakeIOSInstallCombined.cmake b/share/cmake-3.6/Modules/CMakeIOSInstallCombined.cmake
new file mode 100644
index 0000000..1256f56
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeIOSInstallCombined.cmake
@@ -0,0 +1,307 @@
+
+#=============================================================================
+# Copyright 2014-2015 Ruslan Baratov, Gregor Jasny
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Function to print messages of this module
+function(_ios_install_combined_message)
+  message("[iOS combined] " ${ARGN})
+endfunction()
+
+# Get build settings for the current target/config/SDK by running
+# `xcodebuild -sdk ... -showBuildSettings` and parsing it's output
+function(_ios_install_combined_get_build_setting sdk variable resultvar)
+  if("${sdk}" STREQUAL "")
+    message(FATAL_ERROR "`sdk` is empty")
+  endif()
+
+  if("${variable}" STREQUAL "")
+    message(FATAL_ERROR "`variable` is empty")
+  endif()
+
+  if("${resultvar}" STREQUAL "")
+    message(FATAL_ERROR "`resultvar` is empty")
+  endif()
+
+  set(
+      cmd
+      xcodebuild -showBuildSettings
+      -sdk "${sdk}"
+      -target "${CURRENT_TARGET}"
+      -config "${CURRENT_CONFIG}"
+  )
+
+  execute_process(
+      COMMAND ${cmd}
+      WORKING_DIRECTORY "${CMAKE_BINARY_DIR}"
+      RESULT_VARIABLE result
+      OUTPUT_VARIABLE output
+  )
+
+  if(NOT result EQUAL 0)
+    message(FATAL_ERROR "Command failed (${result}): ${cmd}")
+  endif()
+
+  if(NOT output MATCHES " ${variable} = ([^\n]*)")
+    if("${variable}" STREQUAL "VALID_ARCHS")
+      # VALID_ARCHS may be unset by user for given SDK
+      # (e.g. for build without simulator).
+      set("${resultvar}" "" PARENT_SCOPE)
+      return()
+    else()
+      message(FATAL_ERROR "${variable} not found.")
+    endif()
+  endif()
+
+  set("${resultvar}" "${CMAKE_MATCH_1}" PARENT_SCOPE)
+endfunction()
+
+# Get architectures of given SDK (iphonesimulator/iphoneos)
+function(_ios_install_combined_get_valid_archs sdk resultvar)
+  cmake_policy(SET CMP0007 NEW)
+
+  if("${resultvar}" STREQUAL "")
+    message(FATAL_ERROR "`resultvar` is empty")
+  endif()
+
+  _ios_install_combined_get_build_setting("${sdk}" "VALID_ARCHS" valid_archs)
+
+  separate_arguments(valid_archs)
+  list(REMOVE_ITEM valid_archs "") # remove empty elements
+  list(REMOVE_DUPLICATES valid_archs)
+
+  string(REPLACE ";" " " printable "${valid_archs}")
+  _ios_install_combined_message("Architectures (${sdk}): ${printable}")
+
+  set("${resultvar}" "${valid_archs}" PARENT_SCOPE)
+endfunction()
+
+# Final target can contain more architectures that specified by SDK. This
+# function will run 'lipo -info' and parse output. Result will be returned
+# as a CMake list.
+function(_ios_install_combined_get_real_archs filename resultvar)
+  set(cmd "${_lipo_path}" -info "${filename}")
+  execute_process(
+      COMMAND ${cmd}
+      RESULT_VARIABLE result
+      OUTPUT_VARIABLE output
+      ERROR_VARIABLE output
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      ERROR_STRIP_TRAILING_WHITESPACE
+  )
+  if(NOT result EQUAL 0)
+    message(
+        FATAL_ERROR "Command failed (${result}): ${cmd}\n\nOutput:\n${output}"
+    )
+  endif()
+
+  if(NOT output MATCHES "(Architectures in the fat file: [^\n]+ are|Non-fat file: [^\n]+ is architecture): ([^\n]*)")
+    message(FATAL_ERROR "Could not detect architecture from: ${output}")
+  endif()
+
+  separate_arguments(CMAKE_MATCH_2)
+  set(${resultvar} ${CMAKE_MATCH_2} PARENT_SCOPE)
+endfunction()
+
+# Run build command for the given SDK
+function(_ios_install_combined_build sdk)
+  if("${sdk}" STREQUAL "")
+    message(FATAL_ERROR "`sdk` is empty")
+  endif()
+
+  _ios_install_combined_message("Build `${CURRENT_TARGET}` for `${sdk}`")
+
+  execute_process(
+      COMMAND
+      "${CMAKE_COMMAND}"
+      --build
+      .
+      --target "${CURRENT_TARGET}"
+      --config ${CURRENT_CONFIG}
+      --
+      -sdk "${sdk}"
+      WORKING_DIRECTORY "${CMAKE_BINARY_DIR}"
+      RESULT_VARIABLE result
+  )
+
+  if(NOT result EQUAL 0)
+    message(FATAL_ERROR "Build failed")
+  endif()
+endfunction()
+
+# Remove given architecture from file. This step needed only in rare cases
+# when target was built in "unusual" way. Emit warning message.
+function(_ios_install_combined_remove_arch lib arch)
+  _ios_install_combined_message(
+    "Warning! Unexpected architecture `${arch}` detected and will be removed "
+    "from file `${lib}`")
+  set(cmd "${_lipo_path}" -remove ${arch} -output ${lib} ${lib})
+  execute_process(
+      COMMAND ${cmd}
+      RESULT_VARIABLE result
+      OUTPUT_VARIABLE output
+      ERROR_VARIABLE output
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      ERROR_STRIP_TRAILING_WHITESPACE
+  )
+  if(NOT result EQUAL 0)
+    message(
+        FATAL_ERROR "Command failed (${result}): ${cmd}\n\nOutput:\n${output}"
+    )
+  endif()
+endfunction()
+
+# Check that 'lib' contains only 'archs' architectures (remove others).
+function(_ios_install_combined_keep_archs lib archs)
+  _ios_install_combined_get_real_archs("${lib}" real_archs)
+  set(archs_to_remove ${real_archs})
+  list(REMOVE_ITEM archs_to_remove ${archs})
+  foreach(x ${archs_to_remove})
+    _ios_install_combined_remove_arch("${lib}" "${x}")
+  endforeach()
+endfunction()
+
+function(_ios_install_combined_detect_sdks this_sdk_var corr_sdk_var)
+  cmake_policy(SET CMP0057 NEW)
+
+  set(this_sdk "$ENV{PLATFORM_NAME}")
+  if("${this_sdk}" STREQUAL "")
+    message(FATAL_ERROR "Environment variable PLATFORM_NAME is empty")
+  endif()
+
+  set(all_platforms "$ENV{SUPPORTED_PLATFORMS}")
+  if("${all_platforms}" STREQUAL "")
+    message(FATAL_ERROR "Environment variable SUPPORTED_PLATFORMS is empty")
+  endif()
+
+  separate_arguments(all_platforms)
+  if(NOT this_sdk IN_LIST all_platforms)
+    message(FATAL_ERROR "`${this_sdk}` not found in `${all_platforms}`")
+  endif()
+
+  list(REMOVE_ITEM all_platforms "" "${this_sdk}")
+  list(LENGTH all_platforms all_platforms_length)
+  if(NOT all_platforms_length EQUAL 1)
+    message(FATAL_ERROR "Expected one element: ${all_platforms}")
+  endif()
+
+  set(${this_sdk_var} "${this_sdk}" PARENT_SCOPE)
+  set(${corr_sdk_var} "${all_platforms}" PARENT_SCOPE)
+endfunction()
+
+# Create combined binary for the given target.
+#
+# Preconditions:
+#  * Target already installed at ${destination}
+#    for the ${PLATFORM_NAME} platform
+#
+# This function will:
+#  * Run build for the lacking platform, i.e. opposite to the ${PLATFORM_NAME}
+#  * Fuse both libraries by running lipo
+function(ios_install_combined target destination)
+  if("${target}" STREQUAL "")
+    message(FATAL_ERROR "`target` is empty")
+  endif()
+
+  if("${destination}" STREQUAL "")
+    message(FATAL_ERROR "`destination` is empty")
+  endif()
+
+  if(NOT IS_ABSOLUTE "${destination}")
+    message(FATAL_ERROR "`destination` is not absolute: ${destination}")
+  endif()
+
+  if(IS_DIRECTORY "${destination}" OR IS_SYMLINK "${destination}")
+    message(FATAL_ERROR "`destination` is no regular file: ${destination}")
+  endif()
+
+  if("${CMAKE_BINARY_DIR}" STREQUAL "")
+    message(FATAL_ERROR "`CMAKE_BINARY_DIR` is empty")
+  endif()
+
+  if(NOT IS_DIRECTORY "${CMAKE_BINARY_DIR}")
+    message(FATAL_ERROR "Is not a directory: ${CMAKE_BINARY_DIR}")
+  endif()
+
+  if("${CMAKE_INSTALL_CONFIG_NAME}" STREQUAL "")
+    message(FATAL_ERROR "CMAKE_INSTALL_CONFIG_NAME is empty")
+  endif()
+
+  set(cmd xcrun -f lipo)
+  execute_process(
+      COMMAND ${cmd}
+      RESULT_VARIABLE result
+      OUTPUT_VARIABLE output
+      ERROR_VARIABLE output
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      ERROR_STRIP_TRAILING_WHITESPACE
+  )
+  if(NOT result EQUAL 0)
+    message(
+        FATAL_ERROR "Command failed (${result}): ${cmd}\n\nOutput:\n${output}"
+    )
+  endif()
+  set(_lipo_path ${output})
+
+  set(CURRENT_CONFIG "${CMAKE_INSTALL_CONFIG_NAME}")
+  set(CURRENT_TARGET "${target}")
+
+  _ios_install_combined_message("Target: ${CURRENT_TARGET}")
+  _ios_install_combined_message("Config: ${CURRENT_CONFIG}")
+  _ios_install_combined_message("Destination: ${destination}")
+
+  # Get SDKs
+  _ios_install_combined_detect_sdks(this_sdk corr_sdk)
+
+  # Get architectures of the target
+  _ios_install_combined_get_valid_archs("${corr_sdk}" corr_valid_archs)
+  _ios_install_combined_get_valid_archs("${this_sdk}" this_valid_archs)
+
+  # Return if there are no valid architectures for the SDK.
+  # (note that library already installed)
+  if("${corr_valid_archs}" STREQUAL "")
+    _ios_install_combined_message(
+        "No architectures detected for `${corr_sdk}` (skip)"
+    )
+    return()
+  endif()
+
+  # Trigger build of corresponding target
+  _ios_install_combined_build("${corr_sdk}")
+
+  # Get location of the library in build directory
+  _ios_install_combined_get_build_setting(
+    "${corr_sdk}" "CONFIGURATION_BUILD_DIR" corr_build_dir)
+  _ios_install_combined_get_build_setting(
+    "${corr_sdk}" "EXECUTABLE_PATH" corr_executable_path)
+  set(corr "${corr_build_dir}/${corr_executable_path}")
+
+  _ios_install_combined_keep_archs("${corr}" "${corr_valid_archs}")
+  _ios_install_combined_keep_archs("${destination}" "${this_valid_archs}")
+
+  _ios_install_combined_message("Current: ${destination}")
+  _ios_install_combined_message("Corresponding: ${corr}")
+
+  set(cmd "${_lipo_path}" -create ${corr} ${destination} -output ${destination})
+
+  execute_process(
+      COMMAND ${cmd}
+      WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+      RESULT_VARIABLE result
+  )
+
+  if(NOT result EQUAL 0)
+    message(FATAL_ERROR "Command failed: ${cmd}")
+  endif()
+
+  _ios_install_combined_message("Install done: ${destination}")
+endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeImportBuildSettings.cmake b/share/cmake-3.6/Modules/CMakeImportBuildSettings.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeImportBuildSettings.cmake
rename to share/cmake-3.6/Modules/CMakeImportBuildSettings.cmake
diff --git a/share/cmake-3.2/Modules/CMakeJOMFindMake.cmake b/share/cmake-3.6/Modules/CMakeJOMFindMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeJOMFindMake.cmake
rename to share/cmake-3.6/Modules/CMakeJOMFindMake.cmake
diff --git a/share/cmake-3.2/Modules/CMakeJavaCompiler.cmake.in b/share/cmake-3.6/Modules/CMakeJavaCompiler.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeJavaCompiler.cmake.in
rename to share/cmake-3.6/Modules/CMakeJavaCompiler.cmake.in
diff --git a/share/cmake-3.2/Modules/CMakeJavaInformation.cmake b/share/cmake-3.6/Modules/CMakeJavaInformation.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeJavaInformation.cmake
rename to share/cmake-3.6/Modules/CMakeJavaInformation.cmake
diff --git a/share/cmake-3.6/Modules/CMakeLanguageInformation.cmake b/share/cmake-3.6/Modules/CMakeLanguageInformation.cmake
new file mode 100644
index 0000000..e03d149
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeLanguageInformation.cmake
@@ -0,0 +1,37 @@
+
+#=============================================================================
+# Copyright 2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file contains common code blocks used by all the language information
+# files
+
+# load any compiler-wrapper specific information
+macro(__cmake_include_compiler_wrapper lang)
+  set(_INCLUDED_WRAPPER_FILE 0)
+  if (CMAKE_${lang}_COMPILER_ID)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_${lang}_COMPILER_WRAPPER}-${CMAKE_${lang}_COMPILER_ID}-${lang} OPTIONAL RESULT_VARIABLE _INCLUDED_WRAPPER_FILE)
+  endif()
+  if (NOT _INCLUDED_WRAPPER_FILE)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_${lang}_COMPILER_WRAPPER}-${lang} OPTIONAL RESULT_VARIABLE _INCLUDED_WRAPPER_FILE)
+  endif ()
+
+  # No platform - wrapper - lang information so maybe there's just wrapper - lang information
+  if(NOT _INCLUDED_WRAPPER_FILE)
+    if (CMAKE_${lang}_COMPILER_ID)
+      include(Compiler/${CMAKE_${lang}_COMPILER_WRAPPER}-${CMAKE_${lang}_COMPILER_ID}-${lang} OPTIONAL RESULT_VARIABLE _INCLUDED_WRAPPER_FILE)
+    endif()
+    if (NOT _INCLUDED_WRAPPER_FILE)
+      include(Compiler/${CMAKE_${lang}_COMPILER_WRAPPER}-${lang} OPTIONAL RESULT_VARIABLE _INCLUDED_WRAPPER_FILE)
+    endif ()
+  endif ()
+endmacro ()
diff --git a/share/cmake-3.2/Modules/CMakeMSYSFindMake.cmake b/share/cmake-3.6/Modules/CMakeMSYSFindMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeMSYSFindMake.cmake
rename to share/cmake-3.6/Modules/CMakeMSYSFindMake.cmake
diff --git a/share/cmake-3.2/Modules/CMakeMinGWFindMake.cmake b/share/cmake-3.6/Modules/CMakeMinGWFindMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeMinGWFindMake.cmake
rename to share/cmake-3.6/Modules/CMakeMinGWFindMake.cmake
diff --git a/share/cmake-3.2/Modules/CMakeNMakeFindMake.cmake b/share/cmake-3.6/Modules/CMakeNMakeFindMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeNMakeFindMake.cmake
rename to share/cmake-3.6/Modules/CMakeNMakeFindMake.cmake
diff --git a/share/cmake-3.2/Modules/CMakeNinjaFindMake.cmake b/share/cmake-3.6/Modules/CMakeNinjaFindMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeNinjaFindMake.cmake
rename to share/cmake-3.6/Modules/CMakeNinjaFindMake.cmake
diff --git a/share/cmake-3.6/Modules/CMakePackageConfigHelpers.cmake b/share/cmake-3.6/Modules/CMakePackageConfigHelpers.cmake
new file mode 100644
index 0000000..5e5302f
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakePackageConfigHelpers.cmake
@@ -0,0 +1,327 @@
+#.rst:
+# CMakePackageConfigHelpers
+# -------------------------
+#
+# Helpers functions for creating config files that can be included by other
+# projects to find and use a package.
+#
+# Adds the :command:`configure_package_config_file()` and
+# :command:`write_basic_package_version_file()` commands.
+#
+# Generating a Package Configuration File
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# .. command:: configure_package_config_file
+#
+#  Create a config file for a project::
+#
+#    configure_package_config_file(<input> <output>
+#      INSTALL_DESTINATION <path>
+#      [PATH_VARS <var1> <var2> ... <varN>]
+#      [NO_SET_AND_CHECK_MACRO]
+#      [NO_CHECK_REQUIRED_COMPONENTS_MACRO]
+#      [INSTALL_PREFIX <path>]
+#      )
+#
+# ``configure_package_config_file()`` should be used instead of the plain
+# :command:`configure_file()` command when creating the ``<Name>Config.cmake``
+# or ``<Name>-config.cmake`` file for installing a project or library.  It helps
+# making the resulting package relocatable by avoiding hardcoded paths in the
+# installed ``Config.cmake`` file.
+#
+# In a ``FooConfig.cmake`` file there may be code like this to make the install
+# destinations know to the using project:
+#
+# .. code-block:: cmake
+#
+#    set(FOO_INCLUDE_DIR   "@CMAKE_INSTALL_FULL_INCLUDEDIR@" )
+#    set(FOO_DATA_DIR   "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" )
+#    set(FOO_ICONS_DIR   "@CMAKE_INSTALL_PREFIX@/share/icons" )
+#    ...logic to determine installedPrefix from the own location...
+#    set(FOO_CONFIG_DIR  "${installedPrefix}/@CONFIG_INSTALL_DIR@" )
+#
+# All 4 options shown above are not sufficient, since the first 3 hardcode the
+# absolute directory locations, and the 4th case works only if the logic to
+# determine the ``installedPrefix`` is correct, and if ``CONFIG_INSTALL_DIR``
+# contains a relative path, which in general cannot be guaranteed.  This has the
+# effect that the resulting ``FooConfig.cmake`` file would work poorly under
+# Windows and OSX, where users are used to choose the install location of a
+# binary package at install time, independent from how
+# :variable:`CMAKE_INSTALL_PREFIX` was set at build/cmake time.
+#
+# Using ``configure_package_config_file`` helps.  If used correctly, it makes
+# the resulting ``FooConfig.cmake`` file relocatable.  Usage:
+#
+# 1. write a ``FooConfig.cmake.in`` file as you are used to
+# 2. insert a line containing only the string ``@PACKAGE_INIT@``
+# 3. instead of ``set(FOO_DIR "@SOME_INSTALL_DIR@")``, use
+#    ``set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")`` (this must be after the
+#    ``@PACKAGE_INIT@`` line)
+# 4. instead of using the normal :command:`configure_file()`, use
+#    ``configure_package_config_file()``
+#
+#
+#
+# The ``<input>`` and ``<output>`` arguments are the input and output file, the
+# same way as in :command:`configure_file()`.
+#
+# The ``<path>`` given to ``INSTALL_DESTINATION`` must be the destination where
+# the ``FooConfig.cmake`` file will be installed to.  This path can either be
+# absolute, or relative to the ``INSTALL_PREFIX`` path.
+#
+# The variables ``<var1>`` to ``<varN>`` given as ``PATH_VARS`` are the
+# variables which contain install destinations.  For each of them the macro will
+# create a helper variable ``PACKAGE_<var...>``.  These helper variables must be
+# used in the ``FooConfig.cmake.in`` file for setting the installed location.
+# They are calculated by ``configure_package_config_file`` so that they are
+# always relative to the installed location of the package.  This works both for
+# relative and also for absolute locations.  For absolute locations it works
+# only if the absolute location is a subdirectory of ``INSTALL_PREFIX``.
+#
+# If the ``INSTALL_PREFIX`` argument is passed, this is used as base path to
+# calculate all the relative paths.  The ``<path>`` argument must be an absolute
+# path.  If this argument is not passed, the :variable:`CMAKE_INSTALL_PREFIX`
+# variable will be used instead.  The default value is good when generating a
+# FooConfig.cmake file to use your package from the install tree.  When
+# generating a FooConfig.cmake file to use your package from the build tree this
+# option should be used.
+#
+# By default ``configure_package_config_file`` also generates two helper macros,
+# ``set_and_check()`` and ``check_required_components()`` into the
+# ``FooConfig.cmake`` file.
+#
+# ``set_and_check()`` should be used instead of the normal ``set()`` command for
+# setting directories and file locations.  Additionally to setting the variable
+# it also checks that the referenced file or directory actually exists and fails
+# with a ``FATAL_ERROR`` otherwise.  This makes sure that the created
+# ``FooConfig.cmake`` file does not contain wrong references.
+# When using the ``NO_SET_AND_CHECK_MACRO``, this macro is not generated
+# into the ``FooConfig.cmake`` file.
+#
+# ``check_required_components(<package_name>)`` should be called at the end of
+# the ``FooConfig.cmake`` file if the package supports components.  This macro
+# checks whether all requested, non-optional components have been found, and if
+# this is not the case, sets the ``Foo_FOUND`` variable to ``FALSE``, so that
+# the package is considered to be not found.  It does that by testing the
+# ``Foo_<Component>_FOUND`` variables for all requested required components.
+# When using the ``NO_CHECK_REQUIRED_COMPONENTS_MACRO`` option, this macro is
+# not generated into the ``FooConfig.cmake`` file.
+#
+# For an example see below the documentation for
+# :command:`write_basic_package_version_file()`.
+#
+# Generating a Package Version File
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# .. command:: write_basic_package_version_file
+#
+#  Create a version file for a project::
+#
+#    write_basic_package_version_file(<filename>
+#      [VERSION <major.minor.patch>]
+#      COMPATIBILITY <AnyNewerVersion|SameMajorVersion|ExactVersion> )
+#
+#
+# Writes a file for use as ``<package>ConfigVersion.cmake`` file to
+# ``<filename>``.  See the documentation of :command:`find_package()` for
+# details on this.
+#
+# ``<filename>`` is the output filename, it should be in the build tree.
+# ``<major.minor.patch>`` is the version number of the project to be installed.
+#
+# If no ``VERSION`` is given, the :variable:`PROJECT_VERSION` variable is used.
+# If this hasn't been set, it errors out.
+#
+# The ``COMPATIBILITY`` mode ``AnyNewerVersion`` means that the installed
+# package version will be considered compatible if it is newer or exactly the
+# same as the requested version.  This mode should be used for packages which
+# are fully backward compatible, also across major versions.
+# If ``SameMajorVersion`` is used instead, then the behaviour differs from
+# ``AnyNewerVersion`` in that the major version number must be the same as
+# requested, e.g.  version 2.0 will not be considered compatible if 1.0 is
+# requested.  This mode should be used for packages which guarantee backward
+# compatibility within the same major version.
+# If ``ExactVersion`` is used, then the package is only considered compatible if
+# the requested version matches exactly its own version number (not considering
+# the tweak version).  For example, version 1.2.3 of a package is only
+# considered compatible to requested version 1.2.3.  This mode is for packages
+# without compatibility guarantees.
+# If your project has more elaborated version matching rules, you will need to
+# write your own custom ``ConfigVersion.cmake`` file instead of using this
+# macro.
+#
+# Internally, this macro executes :command:`configure_file()` to create the
+# resulting version file.  Depending on the ``COMPATIBLITY``, either the file
+# ``BasicConfigVersion-SameMajorVersion.cmake.in`` or
+# ``BasicConfigVersion-AnyNewerVersion.cmake.in`` is used.  Please note that
+# these two files are internal to CMake and you should not call
+# :command:`configure_file()` on them yourself, but they can be used as starting
+# point to create more sophisticted custom ``ConfigVersion.cmake`` files.
+#
+# Example Generating Package Files
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# Example using both :command:`configure_package_config_file` and
+# ``write_basic_package_version_file()``:
+#
+# ``CMakeLists.txt``:
+#
+# .. code-block:: cmake
+#
+#    set(INCLUDE_INSTALL_DIR include/ ... CACHE )
+#    set(LIB_INSTALL_DIR lib/ ... CACHE )
+#    set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE )
+#    ...
+#    include(CMakePackageConfigHelpers)
+#    configure_package_config_file(FooConfig.cmake.in
+#      ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
+#      INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake
+#      PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR)
+#    write_basic_package_version_file(
+#      ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
+#      VERSION 1.2.3
+#      COMPATIBILITY SameMajorVersion )
+#    install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
+#                  ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
+#            DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake )
+#
+# ``FooConfig.cmake.in``:
+#
+# .. code-block:: cmake
+#
+#    set(FOO_VERSION x.y.z)
+#    ...
+#    @PACKAGE_INIT@
+#    ...
+#    set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
+#    set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@")
+#
+#    check_required_components(Foo)
+
+
+#=============================================================================
+# Copyright 2012 Alexander Neundorf <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(CMakeParseArguments)
+
+include(WriteBasicConfigVersionFile)
+
+macro(WRITE_BASIC_PACKAGE_VERSION_FILE)
+  write_basic_config_version_file(${ARGN})
+endmacro()
+
+function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile)
+  set(options NO_SET_AND_CHECK_MACRO NO_CHECK_REQUIRED_COMPONENTS_MACRO)
+  set(oneValueArgs INSTALL_DESTINATION INSTALL_PREFIX)
+  set(multiValueArgs PATH_VARS )
+
+  cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
+
+  if(CCF_UNPARSED_ARGUMENTS)
+    message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"")
+  endif()
+
+  if(NOT CCF_INSTALL_DESTINATION)
+    message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()")
+  endif()
+
+  if(DEFINED CCF_INSTALL_PREFIX)
+    if(IS_ABSOLUTE "${CCF_INSTALL_PREFIX}")
+      set(installPrefix "${CCF_INSTALL_PREFIX}")
+    else()
+      message(FATAL_ERROR "INSTALL_PREFIX must be an absolute path")
+    endif()
+  elseif(IS_ABSOLUTE "${CMAKE_INSTALL_PREFIX}")
+    set(installPrefix "${CMAKE_INSTALL_PREFIX}")
+  else()
+    get_filename_component(installPrefix "${CMAKE_INSTALL_PREFIX}" ABSOLUTE)
+  endif()
+
+  if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}")
+    set(absInstallDir "${CCF_INSTALL_DESTINATION}")
+  else()
+    set(absInstallDir "${installPrefix}/${CCF_INSTALL_DESTINATION}")
+  endif()
+
+  file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${installPrefix}" )
+
+  foreach(var ${CCF_PATH_VARS})
+    if(NOT DEFINED ${var})
+      message(FATAL_ERROR "Variable ${var} does not exist")
+    else()
+      if(IS_ABSOLUTE "${${var}}")
+        string(REPLACE "${installPrefix}" "\${PACKAGE_PREFIX_DIR}"
+                        PACKAGE_${var} "${${var}}")
+      else()
+        set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}")
+      endif()
+    endif()
+  endforeach()
+
+  get_filename_component(inputFileName "${_inputFile}" NAME)
+
+  set(PACKAGE_INIT "
+####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
+####### Any changes to this file will be overwritten by the next CMake run ####
+####### The input file was ${inputFileName}                            ########
+
+get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE)
+")
+
+  if("${absInstallDir}" MATCHES "^(/usr)?/lib(64)?/.+")
+    # Handle "/usr move" symlinks created by some Linux distros.
+    set(PACKAGE_INIT "${PACKAGE_INIT}
+# Use original install prefix when loaded through a \"/usr move\"
+# cross-prefix symbolic link such as /lib -> /usr/lib.
+get_filename_component(_realCurr \"\${CMAKE_CURRENT_LIST_DIR}\" REALPATH)
+get_filename_component(_realOrig \"${absInstallDir}\" REALPATH)
+if(_realCurr STREQUAL _realOrig)
+  set(PACKAGE_PREFIX_DIR \"${installPrefix}\")
+endif()
+unset(_realOrig)
+unset(_realCurr)
+")
+  endif()
+
+  if(NOT CCF_NO_SET_AND_CHECK_MACRO)
+    set(PACKAGE_INIT "${PACKAGE_INIT}
+macro(set_and_check _var _file)
+  set(\${_var} \"\${_file}\")
+  if(NOT EXISTS \"\${_file}\")
+    message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\")
+  endif()
+endmacro()
+")
+  endif()
+
+
+  if(NOT CCF_NO_CHECK_REQUIRED_COMPONENTS_MACRO)
+    set(PACKAGE_INIT "${PACKAGE_INIT}
+macro(check_required_components _NAME)
+  foreach(comp \${\${_NAME}_FIND_COMPONENTS})
+    if(NOT \${_NAME}_\${comp}_FOUND)
+      if(\${_NAME}_FIND_REQUIRED_\${comp})
+        set(\${_NAME}_FOUND FALSE)
+      endif()
+    endif()
+  endforeach()
+endmacro()
+")
+  endif()
+
+  set(PACKAGE_INIT "${PACKAGE_INIT}
+####################################################################################")
+
+  configure_file("${_inputFile}" "${_outputFile}" @ONLY)
+
+endfunction()
diff --git a/share/cmake-3.6/Modules/CMakeParseArguments.cmake b/share/cmake-3.6/Modules/CMakeParseArguments.cmake
new file mode 100644
index 0000000..fc64ab9
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeParseArguments.cmake
@@ -0,0 +1,21 @@
+#.rst:
+# CMakeParseArguments
+# -------------------
+#
+# This module once implemented the :command:`cmake_parse_arguments` command
+# that is now implemented natively by CMake.  It is now an empty placeholder
+# for compatibility with projects that include it to get the command from
+# CMake 3.4 and lower.
+
+#=============================================================================
+# Copyright 2010 Alexander Neundorf <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
diff --git a/share/cmake-3.6/Modules/CMakeParseImplicitLinkInfo.cmake b/share/cmake-3.6/Modules/CMakeParseImplicitLinkInfo.cmake
new file mode 100644
index 0000000..ef9a2eb
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeParseImplicitLinkInfo.cmake
@@ -0,0 +1,169 @@
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Function parse implicit linker options.
+# This is used internally by CMake and should not be included by user
+# code.
+
+function(CMAKE_PARSE_IMPLICIT_LINK_INFO text lib_var dir_var fwk_var log_var obj_regex)
+  set(implicit_libs_tmp "")
+  set(implicit_dirs_tmp)
+  set(implicit_fwks_tmp)
+  set(log "")
+
+  # Parse implicit linker arguments.
+  set(linker "CMAKE_LINKER-NOTFOUND")
+  if(CMAKE_LINKER)
+    get_filename_component(linker ${CMAKE_LINKER} NAME)
+    string(REGEX REPLACE "([][+.*?()^$])" "\\\\\\1" linker "${linker}")
+  endif()
+  # Construct a regex to match linker lines.  It must match both the
+  # whole line and just the command (argv[0]).
+  set(linker_regex "^( *|.*[/\\])(${linker}|([^/\\]+-)?ld|collect2)[^/\\]*( |$)")
+  set(linker_exclude_regex "collect2 version |^[A-Za-z0-9_]+=|/ldfe ")
+  set(log "${log}  link line regex: [${linker_regex}]\n")
+  string(REGEX REPLACE "\r?\n" ";" output_lines "${text}")
+  foreach(line IN LISTS output_lines)
+    set(cmd)
+    if("${line}" MATCHES "${linker_regex}" AND
+        NOT "${line}" MATCHES "${linker_exclude_regex}")
+      if(XCODE)
+        # Xcode unconditionally adds a path under the project build tree and
+        # on older versions it is not reported with proper quotes.  Remove it.
+        string(REGEX REPLACE "([][+.*()^])" "\\\\\\1" _dir_regex "${CMAKE_BINARY_DIR}")
+        string(REGEX REPLACE " -[FL]${_dir_regex}/([^ ]| [^-])+( |$)" " " xline "${line}")
+        if(NOT "x${xline}" STREQUAL "x${line}")
+          set(log "${log}  reduced line: [${line}]\n            to: [${xline}]\n")
+          set(line "${xline}")
+        endif()
+      endif()
+      if(UNIX)
+        separate_arguments(args UNIX_COMMAND "${line}")
+      else()
+        separate_arguments(args WINDOWS_COMMAND "${line}")
+      endif()
+      list(GET args 0 cmd)
+    endif()
+    if("${cmd}" MATCHES "${linker_regex}")
+      set(log "${log}  link line: [${line}]\n")
+      string(REGEX REPLACE ";-([LYz]);" ";-\\1" args "${args}")
+      foreach(arg IN LISTS args)
+        if("${arg}" MATCHES "^-L(.:)?[/\\]")
+          # Unix search path.
+          string(REGEX REPLACE "^-L" "" dir "${arg}")
+          list(APPEND implicit_dirs_tmp ${dir})
+          set(log "${log}    arg [${arg}] ==> dir [${dir}]\n")
+        elseif("${arg}" MATCHES "^-l([^:].*)$")
+          # Unix library.
+          set(lib "${CMAKE_MATCH_1}")
+          list(APPEND implicit_libs_tmp ${lib})
+          set(log "${log}    arg [${arg}] ==> lib [${lib}]\n")
+        elseif("${arg}" MATCHES "^(.:)?[/\\].*\\.a$")
+          # Unix library full path.
+          list(APPEND implicit_libs_tmp ${arg})
+          set(log "${log}    arg [${arg}] ==> lib [${arg}]\n")
+        elseif("${arg}" MATCHES "^(.:)?[/\\].*\\.o$"
+            AND obj_regex AND "${arg}" MATCHES "${obj_regex}")
+          # Object file full path.
+          list(APPEND implicit_libs_tmp ${arg})
+          set(log "${log}    arg [${arg}] ==> obj [${arg}]\n")
+        elseif("${arg}" MATCHES "^-Y(P,)?[^0-9]")
+          # Sun search path ([^0-9] avoids conflict with Mac -Y<num>).
+          string(REGEX REPLACE "^-Y(P,)?" "" dirs "${arg}")
+          string(REPLACE ":" ";" dirs "${dirs}")
+          list(APPEND implicit_dirs_tmp ${dirs})
+          set(log "${log}    arg [${arg}] ==> dirs [${dirs}]\n")
+        elseif("${arg}" MATCHES "^-l:")
+          # HP named library.
+          list(APPEND implicit_libs_tmp ${arg})
+          set(log "${log}    arg [${arg}] ==> lib [${arg}]\n")
+        elseif("${arg}" MATCHES "^-z(all|default|weak)extract")
+          # Link editor option.
+          list(APPEND implicit_libs_tmp ${arg})
+          set(log "${log}    arg [${arg}] ==> opt [${arg}]\n")
+        else()
+          set(log "${log}    arg [${arg}] ==> ignore\n")
+        endif()
+      endforeach()
+      break()
+    elseif("${line}" MATCHES "LPATH(=| is:? *)(.*)$")
+      set(log "${log}  LPATH line: [${line}]\n")
+      # HP search path.
+      string(REPLACE ":" ";" paths "${CMAKE_MATCH_2}")
+      list(APPEND implicit_dirs_tmp ${paths})
+      set(log "${log}    dirs [${paths}]\n")
+    else()
+      set(log "${log}  ignore line: [${line}]\n")
+    endif()
+  endforeach()
+
+  # Look for library search paths reported by linker.
+  if("${output_lines}" MATCHES ";Library search paths:((;\t[^;]+)+)")
+    string(REPLACE ";\t" ";" implicit_dirs_match "${CMAKE_MATCH_1}")
+    set(log "${log}  Library search paths: [${implicit_dirs_match}]\n")
+    list(APPEND implicit_dirs_tmp ${implicit_dirs_match})
+  endif()
+  if("${output_lines}" MATCHES ";Framework search paths:((;\t[^;]+)+)")
+    string(REPLACE ";\t" ";" implicit_fwks_match "${CMAKE_MATCH_1}")
+    set(log "${log}  Framework search paths: [${implicit_fwks_match}]\n")
+    list(APPEND implicit_fwks_tmp ${implicit_fwks_match})
+  endif()
+
+  # Cleanup list of libraries and flags.
+  # We remove items that are not language-specific.
+  set(implicit_libs "")
+  foreach(lib IN LISTS implicit_libs_tmp)
+    if("x${lib}" MATCHES "^x(crt.*\\.o|gcc.*|System.*)$")
+      set(log "${log}  remove lib [${lib}]\n")
+    elseif(IS_ABSOLUTE "${lib}")
+      get_filename_component(abs "${lib}" ABSOLUTE)
+      if(NOT "x${lib}" STREQUAL "x${abs}")
+        set(log "${log}  collapse lib [${lib}] ==> [${abs}]\n")
+      endif()
+      list(APPEND implicit_libs "${abs}")
+    else()
+      list(APPEND implicit_libs "${lib}")
+    endif()
+  endforeach()
+
+  # Cleanup list of library and framework directories.
+  set(desc_dirs "library")
+  set(desc_fwks "framework")
+  foreach(t dirs fwks)
+    set(implicit_${t} "")
+    foreach(d IN LISTS implicit_${t}_tmp)
+      get_filename_component(dir "${d}" ABSOLUTE)
+      string(FIND "${dir}" "${CMAKE_FILES_DIRECTORY}/" pos)
+      if(NOT pos LESS 0)
+        set(msg ", skipping non-system directory")
+      else()
+        set(msg "")
+        list(APPEND implicit_${t} "${dir}")
+      endif()
+      set(log "${log}  collapse ${desc_${t}} dir [${d}] ==> [${dir}]${msg}\n")
+    endforeach()
+    list(REMOVE_DUPLICATES implicit_${t})
+  endforeach()
+
+  # Log results.
+  set(log "${log}  implicit libs: [${implicit_libs}]\n")
+  set(log "${log}  implicit dirs: [${implicit_dirs}]\n")
+  set(log "${log}  implicit fwks: [${implicit_fwks}]\n")
+
+  # Return results.
+  set(${lib_var} "${implicit_libs}" PARENT_SCOPE)
+  set(${dir_var} "${implicit_dirs}" PARENT_SCOPE)
+  set(${fwk_var} "${implicit_fwks}" PARENT_SCOPE)
+  set(${log_var} "${log}" PARENT_SCOPE)
+endfunction()
diff --git a/share/cmake-3.6/Modules/CMakePlatformId.h.in b/share/cmake-3.6/Modules/CMakePlatformId.h.in
new file mode 100644
index 0000000..47eb00a
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakePlatformId.h.in
@@ -0,0 +1,215 @@
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__sgi) || defined(__sgi__) || defined(_SGI)
+# define PLATFORM_ID "IRIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number components. */
+#ifdef COMPILER_VERSION_MAJOR
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
diff --git a/share/cmake-3.2/Modules/CMakePrintHelpers.cmake b/share/cmake-3.6/Modules/CMakePrintHelpers.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakePrintHelpers.cmake
rename to share/cmake-3.6/Modules/CMakePrintHelpers.cmake
diff --git a/share/cmake-3.2/Modules/CMakePrintSystemInformation.cmake b/share/cmake-3.6/Modules/CMakePrintSystemInformation.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakePrintSystemInformation.cmake
rename to share/cmake-3.6/Modules/CMakePrintSystemInformation.cmake
diff --git a/share/cmake-3.6/Modules/CMakePushCheckState.cmake b/share/cmake-3.6/Modules/CMakePushCheckState.cmake
new file mode 100644
index 0000000..6958da1
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakePushCheckState.cmake
@@ -0,0 +1,97 @@
+#.rst:
+# CMakePushCheckState
+# -------------------
+#
+#
+#
+# This module defines three macros: CMAKE_PUSH_CHECK_STATE()
+# CMAKE_POP_CHECK_STATE() and CMAKE_RESET_CHECK_STATE() These macros can
+# be used to save, restore and reset (i.e., clear contents) the state of
+# the variables CMAKE_REQUIRED_FLAGS, CMAKE_REQUIRED_DEFINITIONS,
+# CMAKE_REQUIRED_LIBRARIES, CMAKE_REQUIRED_INCLUDES and CMAKE_EXTRA_INCLUDE_FILES
+# used by the various Check-files coming with CMake, like e.g.
+# check_function_exists() etc.  The variable contents are pushed on a
+# stack, pushing multiple times is supported.  This is useful e.g.  when
+# executing such tests in a Find-module, where they have to be set, but
+# after the Find-module has been executed they should have the same
+# value as they had before.
+#
+# CMAKE_PUSH_CHECK_STATE() macro receives optional argument RESET.
+# Whether it's specified, CMAKE_PUSH_CHECK_STATE() will set all
+# CMAKE_REQUIRED_* variables to empty values, same as
+# CMAKE_RESET_CHECK_STATE() call will do.
+#
+# Usage:
+#
+# ::
+#
+#    cmake_push_check_state(RESET)
+#    set(CMAKE_REQUIRED_DEFINITIONS -DSOME_MORE_DEF)
+#    check_function_exists(...)
+#    cmake_reset_check_state()
+#    set(CMAKE_REQUIRED_DEFINITIONS -DANOTHER_DEF)
+#    check_function_exists(...)
+#    cmake_pop_check_state()
+
+#=============================================================================
+# Copyright 2006-2011 Alexander Neundorf, <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+macro(CMAKE_RESET_CHECK_STATE)
+
+   set(CMAKE_EXTRA_INCLUDE_FILES)
+   set(CMAKE_REQUIRED_INCLUDES)
+   set(CMAKE_REQUIRED_DEFINITIONS)
+   set(CMAKE_REQUIRED_LIBRARIES)
+   set(CMAKE_REQUIRED_FLAGS)
+   set(CMAKE_REQUIRED_QUIET)
+
+endmacro()
+
+macro(CMAKE_PUSH_CHECK_STATE)
+
+   if(NOT DEFINED _CMAKE_PUSH_CHECK_STATE_COUNTER)
+      set(_CMAKE_PUSH_CHECK_STATE_COUNTER 0)
+   endif()
+
+   math(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}+1")
+
+   set(_CMAKE_EXTRA_INCLUDE_FILES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}  ${CMAKE_EXTRA_INCLUDE_FILES})
+   set(_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}    ${CMAKE_REQUIRED_INCLUDES})
+   set(_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER} ${CMAKE_REQUIRED_DEFINITIONS})
+   set(_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}   ${CMAKE_REQUIRED_LIBRARIES})
+   set(_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}       ${CMAKE_REQUIRED_FLAGS})
+   set(_CMAKE_REQUIRED_QUIET_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}       ${CMAKE_REQUIRED_QUIET})
+
+   if (ARGC GREATER 0 AND ARGV0 STREQUAL "RESET")
+      cmake_reset_check_state()
+   endif()
+
+endmacro()
+
+macro(CMAKE_POP_CHECK_STATE)
+
+# don't pop more than we pushed
+   if("${_CMAKE_PUSH_CHECK_STATE_COUNTER}" GREATER "0")
+
+      set(CMAKE_EXTRA_INCLUDE_FILES  ${_CMAKE_EXTRA_INCLUDE_FILES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      set(CMAKE_REQUIRED_INCLUDES    ${_CMAKE_REQUIRED_INCLUDES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      set(CMAKE_REQUIRED_DEFINITIONS ${_CMAKE_REQUIRED_DEFINITIONS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      set(CMAKE_REQUIRED_LIBRARIES   ${_CMAKE_REQUIRED_LIBRARIES_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      set(CMAKE_REQUIRED_FLAGS       ${_CMAKE_REQUIRED_FLAGS_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+      set(CMAKE_REQUIRED_QUIET       ${_CMAKE_REQUIRED_QUIET_SAVE_${_CMAKE_PUSH_CHECK_STATE_COUNTER}})
+
+      math(EXPR _CMAKE_PUSH_CHECK_STATE_COUNTER "${_CMAKE_PUSH_CHECK_STATE_COUNTER}-1")
+   endif()
+
+endmacro()
diff --git a/share/cmake-3.2/Modules/CMakeRCCompiler.cmake.in b/share/cmake-3.6/Modules/CMakeRCCompiler.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeRCCompiler.cmake.in
rename to share/cmake-3.6/Modules/CMakeRCCompiler.cmake.in
diff --git a/share/cmake-3.6/Modules/CMakeRCInformation.cmake b/share/cmake-3.6/Modules/CMakeRCInformation.cmake
new file mode 100644
index 0000000..94abd4b
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeRCInformation.cmake
@@ -0,0 +1,54 @@
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+# This file sets the basic flags for the Windows Resource Compiler.
+# It also loads the available platform file for the system-compiler
+# if it exists.
+
+# make sure we don't use CMAKE_BASE_NAME from somewhere else
+set(CMAKE_BASE_NAME)
+if(CMAKE_RC_COMPILER MATCHES "windres[^/]*$")
+ set(CMAKE_BASE_NAME "windres")
+else()
+ get_filename_component(CMAKE_BASE_NAME ${CMAKE_RC_COMPILER} NAME_WE)
+endif()
+set(CMAKE_SYSTEM_AND_RC_COMPILER_INFO_FILE
+  ${CMAKE_ROOT}/Modules/Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME}.cmake)
+include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL)
+
+
+
+set (CMAKE_RC_FLAGS "$ENV{RCFLAGS} ${CMAKE_RC_FLAGS_INIT}" CACHE STRING
+     "Flags for Windows Resource Compiler.")
+
+# These are the only types of flags that should be passed to the rc
+# command, if COMPILE_FLAGS is used on a target this will be used
+# to filter out any other flags
+set(CMAKE_RC_FLAG_REGEX "^[-/](D|I)")
+
+# now define the following rule variables
+# CMAKE_RC_COMPILE_OBJECT
+set(CMAKE_INCLUDE_FLAG_RC "-I")
+# compile a Resource file into an object file
+if(NOT CMAKE_RC_COMPILE_OBJECT)
+  set(CMAKE_RC_COMPILE_OBJECT
+    "<CMAKE_RC_COMPILER> <DEFINES> <INCLUDES> <FLAGS> /fo<OBJECT> <SOURCE>")
+endif()
+
+mark_as_advanced(
+CMAKE_RC_FLAGS
+)
+# set this variable so we can avoid loading this more than once.
+set(CMAKE_RC_INFORMATION_LOADED 1)
diff --git a/share/cmake-3.6/Modules/CMakeSwiftCompiler.cmake.in b/share/cmake-3.6/Modules/CMakeSwiftCompiler.cmake.in
new file mode 100644
index 0000000..45f0a31
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeSwiftCompiler.cmake.in
@@ -0,0 +1,5 @@
+set(CMAKE_Swift_COMPILER "@CMAKE_Swift_COMPILER@")
+set(CMAKE_Swift_COMPILER_ID "@CMAKE_Swift_COMPILER_ID@")
+
+set(CMAKE_Swift_COMPILER_ID_RUN 1)
+set(CMAKE_Swift_SOURCE_FILE_EXTENSIONS swift)
diff --git a/share/cmake-3.6/Modules/CMakeSwiftInformation.cmake b/share/cmake-3.6/Modules/CMakeSwiftInformation.cmake
new file mode 100644
index 0000000..61ad928
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeSwiftInformation.cmake
@@ -0,0 +1,41 @@
+
+#=============================================================================
+# Copyright 2004-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(CMAKE_Swift_OUTPUT_EXTENSION .o)
+
+# Load compiler-specific information.
+if(CMAKE_Swift_COMPILER_ID)
+  include(Compiler/${CMAKE_Swift_COMPILER_ID}-Swift OPTIONAL)
+endif()
+
+# load the system- and compiler specific files
+if(CMAKE_Swift_COMPILER_ID)
+  # load a hardware specific file, mostly useful for embedded compilers
+  if(CMAKE_SYSTEM_PROCESSOR)
+    include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_Swift_COMPILER_ID}-Swift-${CMAKE_SYSTEM_PROCESSOR} OPTIONAL)
+  endif()
+  include(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_Swift_COMPILER_ID}-Swift OPTIONAL)
+endif()
+
+# for most systems a module is the same as a shared library
+# so unless the variable CMAKE_MODULE_EXISTS is set just
+# copy the values from the LIBRARY variables
+if(NOT CMAKE_MODULE_EXISTS)
+  set(CMAKE_SHARED_MODULE_Swift_FLAGS ${CMAKE_SHARED_LIBRARY_Swift_FLAGS})
+  set(CMAKE_SHARED_MODULE_CREATE_Swift_FLAGS ${CMAKE_SHARED_LIBRARY_CREATE_Swift_FLAGS})
+endif()
+
+include(CMakeCommonLanguageInclude)
+
+set(CMAKE_Swift_INFORMATION_LOADED 1)
diff --git a/share/cmake-3.2/Modules/CMakeSystem.cmake.in b/share/cmake-3.6/Modules/CMakeSystem.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeSystem.cmake.in
rename to share/cmake-3.6/Modules/CMakeSystem.cmake.in
diff --git a/share/cmake-3.2/Modules/CMakeSystemSpecificInformation.cmake b/share/cmake-3.6/Modules/CMakeSystemSpecificInformation.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeSystemSpecificInformation.cmake
rename to share/cmake-3.6/Modules/CMakeSystemSpecificInformation.cmake
diff --git a/share/cmake-3.2/Modules/CMakeSystemSpecificInitialize.cmake b/share/cmake-3.6/Modules/CMakeSystemSpecificInitialize.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeSystemSpecificInitialize.cmake
rename to share/cmake-3.6/Modules/CMakeSystemSpecificInitialize.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestASM-ATTCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestASM-ATTCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestASM-ATTCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestASM-ATTCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestASMCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestASMCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestASMCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestASMCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestASM_MASMCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestASM_MASMCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestASM_MASMCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestASM_MASMCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestASM_NASMCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestASM_NASMCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestASM_NASMCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestASM_NASMCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestCCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestCCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestCCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestCCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestCXXCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestCXXCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestCXXCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestCXXCompiler.cmake
diff --git a/share/cmake-3.6/Modules/CMakeTestCompilerCommon.cmake b/share/cmake-3.6/Modules/CMakeTestCompilerCommon.cmake
new file mode 100644
index 0000000..e0d45e7
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeTestCompilerCommon.cmake
@@ -0,0 +1,17 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(PrintTestCompilerStatus LANG MSG)
+  message(STATUS "Check for working ${LANG} compiler: ${CMAKE_${LANG}_COMPILER}${MSG}")
+endfunction()
diff --git a/share/cmake-3.2/Modules/CMakeTestFortranCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestFortranCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestFortranCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestFortranCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestGNU.c b/share/cmake-3.6/Modules/CMakeTestGNU.c
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestGNU.c
rename to share/cmake-3.6/Modules/CMakeTestGNU.c
diff --git a/share/cmake-3.2/Modules/CMakeTestJavaCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestJavaCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestJavaCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestJavaCompiler.cmake
diff --git a/share/cmake-3.2/Modules/CMakeTestRCCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestRCCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeTestRCCompiler.cmake
rename to share/cmake-3.6/Modules/CMakeTestRCCompiler.cmake
diff --git a/share/cmake-3.6/Modules/CMakeTestSwiftCompiler.cmake b/share/cmake-3.6/Modules/CMakeTestSwiftCompiler.cmake
new file mode 100644
index 0000000..89849fb
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeTestSwiftCompiler.cmake
@@ -0,0 +1,65 @@
+
+#=============================================================================
+# Copyright 2003-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(CMAKE_Swift_COMPILER_FORCED)
+  # The compiler configuration was forced by the user.
+  # Assume the user has configured all compiler information.
+  set(CMAKE_Swift_COMPILER_WORKS TRUE)
+  return()
+endif()
+
+include(CMakeTestCompilerCommon)
+
+# Remove any cached result from an older CMake version.
+# We now store this in CMakeSwiftCompiler.cmake.
+unset(CMAKE_Swift_COMPILER_WORKS CACHE)
+
+# This file is used by EnableLanguage in cmGlobalGenerator to
+# determine that that selected C++ compiler can actually compile
+# and link the most basic of programs.   If not, a fatal error
+# is set and cmake stops processing commands and will not generate
+# any makefiles or projects.
+if(NOT CMAKE_Swift_COMPILER_WORKS)
+  PrintTestCompilerStatus("Swift" "")
+  file(WRITE ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/main.swift
+    "import Foundation\n"
+    "print(\"CMake\")\n")
+  try_compile(CMAKE_Swift_COMPILER_WORKS ${CMAKE_BINARY_DIR}
+    ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/main.swift
+    OUTPUT_VARIABLE __CMAKE_Swift_COMPILER_OUTPUT)
+  # Move result from cache to normal variable.
+  set(CMAKE_Swift_COMPILER_WORKS ${CMAKE_Swift_COMPILER_WORKS})
+  unset(CMAKE_Swift_COMPILER_WORKS CACHE)
+  set(Swift_TEST_WAS_RUN 1)
+endif()
+
+if(NOT CMAKE_Swift_COMPILER_WORKS)
+  PrintTestCompilerStatus("Swift" " -- broken")
+  file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+    "Determining if the Swift compiler works failed with "
+    "the following output:\n${__CMAKE_Swift_COMPILER_OUTPUT}\n\n")
+  message(FATAL_ERROR "The Swift compiler \"${CMAKE_Swift_COMPILER}\" "
+    "is not able to compile a simple test program.\nIt fails "
+    "with the following output:\n ${__CMAKE_Swift_COMPILER_OUTPUT}\n\n"
+    "CMake will not be able to correctly generate this project.")
+else()
+  if(Swift_TEST_WAS_RUN)
+    PrintTestCompilerStatus("Swift" " -- works")
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+      "Determining if the Swift compiler works passed with "
+      "the following output:\n${__CMAKE_Swift_COMPILER_OUTPUT}\n\n")
+  endif()
+endif()
+
+unset(__CMAKE_Swift_COMPILER_OUTPUT)
diff --git a/share/cmake-3.2/Modules/CMakeUnixFindMake.cmake b/share/cmake-3.6/Modules/CMakeUnixFindMake.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeUnixFindMake.cmake
rename to share/cmake-3.6/Modules/CMakeUnixFindMake.cmake
diff --git a/share/cmake-3.2/Modules/CMakeVS7BackwardCompatibility.cmake b/share/cmake-3.6/Modules/CMakeVS7BackwardCompatibility.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CMakeVS7BackwardCompatibility.cmake
rename to share/cmake-3.6/Modules/CMakeVS7BackwardCompatibility.cmake
diff --git a/share/cmake-3.6/Modules/CMakeVerifyManifest.cmake b/share/cmake-3.6/Modules/CMakeVerifyManifest.cmake
new file mode 100644
index 0000000..a54b9d2
--- /dev/null
+++ b/share/cmake-3.6/Modules/CMakeVerifyManifest.cmake
@@ -0,0 +1,120 @@
+#.rst:
+# CMakeVerifyManifest
+# -------------------
+#
+#
+#
+# CMakeVerifyManifest.cmake
+#
+# This script is used to verify that embedded manifests and side by side
+# manifests for a project match.  To run this script, cd to a directory
+# and run the script with cmake -P.  On the command line you can pass in
+# versions that are OK even if not found in the .manifest files.  For
+# example, cmake -Dallow_versions=8.0.50608.0
+# -PCmakeVerifyManifest.cmake could be used to allow an embedded manifest
+# of 8.0.50608.0 to be used in a project even if that version was not
+# found in the .manifest file.
+
+# This script first recursively globs *.manifest files from
+# the current directory.  Then globs *.exe and *.dll.  Each
+# .exe and .dll is scanned for embedded manifests and the versions
+# of CRT are compared to those found in the .manifest files
+# from the first glob.
+
+#=============================================================================
+# Copyright 2008-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+# crt_version:
+# function to extract the CRT version from a file
+# this can be passed a .exe, .dll, or a .manifest file
+# it will put the list of versions found into the variable
+# specified by list_var
+function(crt_version file list_var)
+  file(STRINGS "${file}" strings REGEX "Microsoft.VC...CRT" NEWLINE_CONSUME)
+  foreach(s ${strings})
+    set(has_match 1)
+    string(REGEX
+      REPLACE ".*<assembly.*\"Microsoft.VC...CRT\".*version=\"([^\"]*)\".*</assembly>.*$" "\\1"
+      version "${s}")
+    if(NOT "${version}" STREQUAL "")
+      list(APPEND version_list ${version})
+    else()
+      message(FATAL_ERROR "Parse error could not find version in [${s}]")
+    endif()
+  endforeach()
+  if(NOT DEFINED has_match)
+    message("Information: no embedded manifest in: ${file}")
+    return()
+  endif()
+  list(APPEND version_list ${${list_var}})
+  list(REMOVE_DUPLICATES version_list)
+  if(version_list)
+    set(${list_var} ${version_list} PARENT_SCOPE)
+  endif()
+endfunction()
+set(fatal_error FALSE)
+
+# check_version:
+#
+# test a file against the shipped manifest versions
+# for a directory
+function(check_version file manifest_versions)
+  set(manifest_versions ${manifest_versions} ${allow_versions})
+  # collect versions for a given file
+  crt_version(${file} file_versions)
+  # see if the versions
+  foreach(ver ${file_versions})
+    list(FIND manifest_versions "${ver}" found_version)
+    if("${found_version}" EQUAL -1)
+      message("ERROR: ${file} uses ${ver} not found in shipped manifests:[${manifest_versions}].")
+      set(fatal_error TRUE PARENT_SCOPE)
+    endif()
+  endforeach()
+  list(LENGTH file_versions len)
+  if(${len} GREATER 1)
+    message("WARNING: found more than one version of MICROSOFT.VC80.CRT referenced in ${file}: [${file_versions}]")
+  endif()
+endfunction()
+
+# collect up the versions of CRT that are shipped
+# in .manifest files
+set(manifest_version_list )
+file(GLOB_RECURSE manifest_files "*.manifest")
+foreach(f ${manifest_files})
+  crt_version("${f}" manifest_version_list)
+endforeach()
+list(LENGTH manifest_version_list LEN)
+if(LEN EQUAL 0)
+  message(FATAL_ERROR "No .manifest files found, no version check can be done.")
+endif()
+message("Versions found in ${manifest_files}: ${manifest_version_list}")
+if(DEFINED allow_versions)
+  message("Extra versions allowed: ${allow_versions}")
+endif()
+
+# now find all .exe and .dll files
+# and call check_version on each of them
+file(GLOB_RECURSE exe_files "*.exe")
+file(GLOB_RECURSE dll_files "*.dll")
+set(exe_files ${exe_files} ${dll_files})
+foreach(f ${exe_files})
+  check_version(${f} "${manifest_version_list}")
+endforeach()
+
+# report a fatal error if there were any so that cmake will return
+# a non zero value
+if(fatal_error)
+  message(FATAL_ERROR "This distribution embeds dll "
+    " versions that it does not ship, and may not work on other machines.")
+endif()
diff --git a/share/cmake-3.2/Modules/CPack.DS_Store.in b/share/cmake-3.6/Modules/CPack.DS_Store.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.DS_Store.in
rename to share/cmake-3.6/Modules/CPack.DS_Store.in
Binary files differ
diff --git a/share/cmake-3.2/Modules/CPack.Description.plist.in b/share/cmake-3.6/Modules/CPack.Description.plist.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.Description.plist.in
rename to share/cmake-3.6/Modules/CPack.Description.plist.in
diff --git a/share/cmake-3.2/Modules/CPack.Info.plist.in b/share/cmake-3.6/Modules/CPack.Info.plist.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.Info.plist.in
rename to share/cmake-3.6/Modules/CPack.Info.plist.in
diff --git a/share/cmake-3.2/Modules/CPack.OSXScriptLauncher.in b/share/cmake-3.6/Modules/CPack.OSXScriptLauncher.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.OSXScriptLauncher.in
rename to share/cmake-3.6/Modules/CPack.OSXScriptLauncher.in
Binary files differ
diff --git a/share/cmake-3.2/Modules/CPack.OSXScriptLauncher.rsrc.in b/share/cmake-3.6/Modules/CPack.OSXScriptLauncher.rsrc.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.OSXScriptLauncher.rsrc.in
rename to share/cmake-3.6/Modules/CPack.OSXScriptLauncher.rsrc.in
Binary files differ
diff --git a/share/cmake-3.6/Modules/CPack.OSXX11.Info.plist.in b/share/cmake-3.6/Modules/CPack.OSXX11.Info.plist.in
new file mode 100644
index 0000000..23a1483
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPack.OSXX11.Info.plist.in
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>CFBundleDevelopmentRegion</key>
+	<string>English</string>
+  <key>CFBundleDocumentTypes</key>
+  <array>
+    <dict>
+      <key>CFBundleTypeExtensions</key>
+      <array>
+        <string>@CPACK_FILE_ASSOCIATION_EXTENSION@</string>
+      </array>
+      <key>CFBundleTypeName</key>
+      <string>@CPACK_FILE_ASSOCIATION_TYPE@</string>
+      <key>CFBundleTypeRole</key>
+      <string>Editor</string>
+    </dict>
+  </array>
+	<key>CFBundleExecutable</key>
+	<string>@CPACK_PACKAGE_FILE_NAME@</string>
+	<key>CFBundleGetInfoString</key>
+	<string>@CPACK_APPLE_GUI_INFO_STRING@</string>
+	<key>CFBundleIconFile</key>
+	<string>@CPACK_APPLE_GUI_ICON@</string>
+	<key>CFBundleIdentifier</key>
+	<string>@CPACK_APPLE_GUI_IDENTIFIER@</string>
+	<key>CFBundleInfoDictionaryVersion</key>
+	<string>6.0</string>
+	<key>CFBundleLongVersionString</key>
+	<string>@CPACK_APPLE_GUI_LONG_VERSION_STRING@</string>
+	<key>CFBundleName</key>
+	<string>@CPACK_APPLE_GUI_BUNDLE_NAME@</string>
+	<key>CFBundlePackageType</key>
+	<string>APPL</string>
+	<key>CFBundleShortVersionString</key>
+	<string>@CPACK_APPLE_GUI_SHORT_VERSION_STRING@</string>
+	<key>CFBundleSignature</key>
+	<string>????</string>
+	<key>CFBundleVersion</key>
+	<string>@CPACK_APPLE_GUI_BUNDLE_VERSION@</string>
+	<key>CSResourcesFileMapped</key>
+	<true/>
+	<key>NSHumanReadableCopyright</key>
+	<string>@CPACK_APPLE_GUI_COPYRIGHT@</string>
+</dict>
+</plist>
diff --git a/share/cmake-3.2/Modules/CPack.OSXX11.main.scpt.in b/share/cmake-3.6/Modules/CPack.OSXX11.main.scpt.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.OSXX11.main.scpt.in
rename to share/cmake-3.6/Modules/CPack.OSXX11.main.scpt.in
Binary files differ
diff --git a/share/cmake-3.2/Modules/CPack.RuntimeScript.in b/share/cmake-3.6/Modules/CPack.RuntimeScript.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.RuntimeScript.in
rename to share/cmake-3.6/Modules/CPack.RuntimeScript.in
diff --git a/share/cmake-3.2/Modules/CPack.STGZ_Header.sh.in b/share/cmake-3.6/Modules/CPack.STGZ_Header.sh.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.STGZ_Header.sh.in
rename to share/cmake-3.6/Modules/CPack.STGZ_Header.sh.in
diff --git a/share/cmake-3.2/Modules/CPack.VolumeIcon.icns.in b/share/cmake-3.6/Modules/CPack.VolumeIcon.icns.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.VolumeIcon.icns.in
rename to share/cmake-3.6/Modules/CPack.VolumeIcon.icns.in
Binary files differ
diff --git a/share/cmake-3.2/Modules/CPack.background.png.in b/share/cmake-3.6/Modules/CPack.background.png.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.background.png.in
rename to share/cmake-3.6/Modules/CPack.background.png.in
Binary files differ
diff --git a/share/cmake-3.6/Modules/CPack.cmake b/share/cmake-3.6/Modules/CPack.cmake
new file mode 100644
index 0000000..77f854d
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPack.cmake
@@ -0,0 +1,653 @@
+#.rst:
+# CPack
+# -----
+#
+# Build binary and source package installers.
+#
+# Variables common to all CPack generators
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# The
+# CPack module generates binary and source installers in a variety of
+# formats using the cpack program.  Inclusion of the CPack module adds
+# two new targets to the resulting makefiles, package and
+# package_source, which build the binary and source installers,
+# respectively.  The generated binary installers contain everything
+# installed via CMake's INSTALL command (and the deprecated
+# INSTALL_FILES, INSTALL_PROGRAMS, and INSTALL_TARGETS commands).
+#
+# For certain kinds of binary installers (including the graphical
+# installers on Mac OS X and Windows), CPack generates installers that
+# allow users to select individual application components to install.
+# See CPackComponent module for that.
+#
+# The CPACK_GENERATOR variable has different meanings in different
+# contexts.  In your CMakeLists.txt file, CPACK_GENERATOR is a *list of
+# generators*: when run with no other arguments, CPack will iterate over
+# that list and produce one package for each generator.  In a
+# CPACK_PROJECT_CONFIG_FILE, though, CPACK_GENERATOR is a *string naming
+# a single generator*.  If you need per-cpack- generator logic to
+# control *other* cpack settings, then you need a
+# CPACK_PROJECT_CONFIG_FILE.
+#
+# The CMake source tree itself contains a CPACK_PROJECT_CONFIG_FILE.
+# See the top level file CMakeCPackOptions.cmake.in for an example.
+#
+# If set, the CPACK_PROJECT_CONFIG_FILE is included automatically on a
+# per-generator basis.  It only need contain overrides.
+#
+# Here's how it works:
+#
+# * cpack runs
+# * it includes CPackConfig.cmake
+# * it iterates over the generators listed in that file's
+#   CPACK_GENERATOR list variable (unless told to use just a
+#   specific one via -G on the command line...)
+# * foreach generator, it then
+#
+#   - sets CPACK_GENERATOR to the one currently being iterated
+#   - includes the CPACK_PROJECT_CONFIG_FILE
+#   - produces the package for that generator
+#
+# This is the key: For each generator listed in CPACK_GENERATOR in
+# CPackConfig.cmake, cpack will *reset* CPACK_GENERATOR internally to
+# *the one currently being used* and then include the
+# CPACK_PROJECT_CONFIG_FILE.
+#
+# Before including this CPack module in your CMakeLists.txt file, there
+# are a variety of variables that can be set to customize the resulting
+# installers.  The most commonly-used variables are:
+#
+# .. variable:: CPACK_PACKAGE_NAME
+#
+#  The name of the package (or application). If not specified, defaults to
+#  the project name.
+#
+# .. variable:: CPACK_PACKAGE_VENDOR
+#
+#  The name of the package vendor. (e.g., "Kitware").
+#
+# .. variable:: CPACK_PACKAGE_DIRECTORY
+#
+#  The directory in which CPack is doing its packaging. If it is not set
+#  then this will default (internally) to the build dir. This variable may
+#  be defined in CPack config file or from the cpack command line option
+#  "-B". If set the command line option override the value found in the
+#  config file.
+#
+# .. variable:: CPACK_PACKAGE_VERSION_MAJOR
+#
+#  Package major Version
+#
+# .. variable:: CPACK_PACKAGE_VERSION_MINOR
+#
+#  Package minor Version
+#
+# .. variable:: CPACK_PACKAGE_VERSION_PATCH
+#
+#  Package patch Version
+#
+# .. variable:: CPACK_PACKAGE_DESCRIPTION_FILE
+#
+#  A text file used to describe the project. Used, for example, the
+#  introduction screen of a CPack-generated Windows installer to describe
+#  the project.
+#
+# .. variable:: CPACK_PACKAGE_DESCRIPTION_SUMMARY
+#
+#  Short description of the project (only a few words).
+#
+# .. variable:: CPACK_PACKAGE_FILE_NAME
+#
+#  The name of the package file to generate, not including the
+#  extension. For example, cmake-2.6.1-Linux-i686.  The default value is::
+#
+#   ${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}.
+#
+# .. variable:: CPACK_PACKAGE_INSTALL_DIRECTORY
+#
+#  Installation directory on the target system. This may be used by some
+#  CPack generators like NSIS to create an installation directory e.g.,
+#  "CMake 2.5" below the installation prefix. All installed element will be
+#  put inside this directory.
+#
+# .. variable:: CPACK_PACKAGE_ICON
+#
+#  A branding image that will be displayed inside the installer (used by GUI
+#  installers).
+#
+# .. variable:: CPACK_PROJECT_CONFIG_FILE
+#
+#  CPack-time project CPack configuration file. This file included at cpack
+#  time, once per generator after CPack has set CPACK_GENERATOR to the
+#  actual generator being used. It allows per-generator setting of CPACK_*
+#  variables at cpack time.
+#
+# .. variable:: CPACK_RESOURCE_FILE_LICENSE
+#
+#  License to be embedded in the installer. It will typically be displayed
+#  to the user by the produced installer (often with an explicit "Accept"
+#  button, for graphical installers) prior to installation. This license
+#  file is NOT added to installed file but is used by some CPack generators
+#  like NSIS. If you want to install a license file (may be the same as this
+#  one) along with your project you must add an appropriate CMake INSTALL
+#  command in your CMakeLists.txt.
+#
+# .. variable:: CPACK_RESOURCE_FILE_README
+#
+#  ReadMe file to be embedded in the installer. It typically describes in
+#  some detail the purpose of the project during the installation. Not all
+#  CPack generators uses this file.
+#
+# .. variable:: CPACK_RESOURCE_FILE_WELCOME
+#
+#  Welcome file to be embedded in the installer. It welcomes users to this
+#  installer.  Typically used in the graphical installers on Windows and Mac
+#  OS X.
+#
+# .. variable:: CPACK_MONOLITHIC_INSTALL
+#
+#  Disables the component-based installation mechanism. When set the
+#  component specification is ignored and all installed items are put in a
+#  single "MONOLITHIC" package.  Some CPack generators do monolithic
+#  packaging by default and may be asked to do component packaging by
+#  setting CPACK_<GENNAME>_COMPONENT_INSTALL to 1/TRUE.
+#
+# .. variable:: CPACK_GENERATOR
+#
+#  List of CPack generators to use. If not specified, CPack will create a
+#  set of options CPACK_BINARY_<GENNAME> (e.g., CPACK_BINARY_NSIS) allowing
+#  the user to enable/disable individual generators. This variable may be
+#  used on the command line as well as in::
+#
+#   cpack -D CPACK_GENERATOR="ZIP;TGZ" /path/to/build/tree
+#
+# .. variable:: CPACK_OUTPUT_CONFIG_FILE
+#
+#  The name of the CPack binary configuration file. This file is the CPack
+#  configuration generated by the CPack module for binary
+#  installers. Defaults to CPackConfig.cmake.
+#
+# .. variable:: CPACK_PACKAGE_EXECUTABLES
+#
+#  Lists each of the executables and associated text label to be used to
+#  create Start Menu shortcuts. For example, setting this to the list
+#  ccmake;CMake will create a shortcut named "CMake" that will execute the
+#  installed executable ccmake. Not all CPack generators use it (at least
+#  NSIS, WIX and OSXX11 do).
+#
+# .. variable:: CPACK_STRIP_FILES
+#
+#  List of files to be stripped. Starting with CMake 2.6.0 CPACK_STRIP_FILES
+#  will be a boolean variable which enables stripping of all files (a list
+#  of files evaluates to TRUE in CMake, so this change is compatible).
+#
+# .. variable:: CPACK_VERBATIM_VARIABLES
+#
+#  If set to TRUE, values of variables prefixed with CPACK_ will be escaped
+#  before being written to the configuration files, so that the cpack program
+#  receives them exactly as they were specified. If not, characters like quotes
+#  and backslashes can cause parsing errors or alter the value received by the
+#  cpack program. Defaults to FALSE for backwards compatibility.
+#
+#  * Mandatory : NO
+#  * Default   : FALSE
+#
+# The following CPack variables are specific to source packages, and
+# will not affect binary packages:
+#
+# .. variable:: CPACK_SOURCE_PACKAGE_FILE_NAME
+#
+#  The name of the source package. For example cmake-2.6.1.
+#
+# .. variable:: CPACK_SOURCE_STRIP_FILES
+#
+#  List of files in the source tree that will be stripped. Starting with
+#  CMake 2.6.0 CPACK_SOURCE_STRIP_FILES will be a boolean variable which
+#  enables stripping of all files (a list of files evaluates to TRUE in
+#  CMake, so this change is compatible).
+#
+# .. variable:: CPACK_SOURCE_GENERATOR
+#
+#  List of generators used for the source packages. As with CPACK_GENERATOR,
+#  if this is not specified then CPack will create a set of options (e.g.,
+#  CPACK_SOURCE_ZIP) allowing users to select which packages will be
+#  generated.
+#
+# .. variable:: CPACK_SOURCE_OUTPUT_CONFIG_FILE
+#
+#  The name of the CPack source configuration file. This file is the CPack
+#  configuration generated by the CPack module for source
+#  installers. Defaults to CPackSourceConfig.cmake.
+#
+# .. variable:: CPACK_SOURCE_IGNORE_FILES
+#
+#  Pattern of files in the source tree that won't be packaged when building
+#  a source package. This is a list of regular expression patterns (that
+#  must be properly escaped), e.g.,
+#  /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.*
+#
+# The following variables are for advanced uses of CPack:
+#
+# .. variable:: CPACK_CMAKE_GENERATOR
+#
+#  What CMake generator should be used if the project is CMake
+#  project. Defaults to the value of CMAKE_GENERATOR few users will want to
+#  change this setting.
+#
+# .. variable:: CPACK_INSTALL_CMAKE_PROJECTS
+#
+#  List of four values that specify what project to install. The four values
+#  are: Build directory, Project Name, Project Component, Directory. If
+#  omitted, CPack will build an installer that installs everything.
+#
+# .. variable:: CPACK_SYSTEM_NAME
+#
+#  System name, defaults to the value of ${CMAKE_SYSTEM_NAME}.
+#
+# .. variable:: CPACK_PACKAGE_VERSION
+#
+#  Package full version, used internally. By default, this is built from
+#  CPACK_PACKAGE_VERSION_MAJOR, CPACK_PACKAGE_VERSION_MINOR, and
+#  CPACK_PACKAGE_VERSION_PATCH.
+#
+# .. variable:: CPACK_TOPLEVEL_TAG
+#
+#  Directory for the installed files.
+#
+# .. variable:: CPACK_INSTALL_COMMANDS
+#
+#  Extra commands to install components.
+#
+# .. variable:: CPACK_INSTALLED_DIRECTORIES
+#
+#  Extra directories to install.
+#
+# .. variable:: CPACK_PACKAGE_INSTALL_REGISTRY_KEY
+#
+#  Registry key used when installing this project. This is only used by
+#  installer for Windows.  The default value is based on the installation
+#  directory.
+#
+# .. variable:: CPACK_CREATE_DESKTOP_LINKS
+#
+#  List of desktop links to create.
+#  Each desktop link requires a corresponding start menu shortcut
+#  as created by :variable:`CPACK_PACKAGE_EXECUTABLES`.
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Define this var in order to avoid (or warn) concerning multiple inclusion
+if(CPack_CMake_INCLUDED)
+  message(WARNING "CPack.cmake has already been included!!")
+else()
+  set(CPack_CMake_INCLUDED 1)
+endif()
+
+# Pick a configuration file
+set(cpack_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
+if(EXISTS "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
+  set(cpack_input_file "${CMAKE_SOURCE_DIR}/CPackConfig.cmake.in")
+endif()
+set(cpack_source_input_file "${CMAKE_ROOT}/Templates/CPackConfig.cmake.in")
+if(EXISTS "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
+  set(cpack_source_input_file "${CMAKE_SOURCE_DIR}/CPackSourceConfig.cmake.in")
+endif()
+
+# Backward compatibility
+# Include CPackComponent macros if it has not already been included before.
+include(CPackComponent)
+
+# Macro for setting values if a user did not overwrite them
+# Mangles CMake-special characters. Only kept for backwards compatibility.
+macro(cpack_set_if_not_set name value)
+  message(DEPRECATION "cpack_set_if_not_set is obsolete; do not use.")
+  _cpack_set_default("${name}" "${value}")
+endmacro()
+
+# cpack_encode_variables - Function to encode variables for the configuration file
+# find any variable that starts with CPACK and create a variable
+# _CPACK_OTHER_VARIABLES_ that contains SET commands for
+# each cpack variable.  _CPACK_OTHER_VARIABLES_ is then
+# used as an @ replacment in configure_file for the CPackConfig.
+function(cpack_encode_variables)
+  set(commands "")
+  get_cmake_property(res VARIABLES)
+  foreach(var ${res})
+    if(var MATCHES "^CPACK")
+      if(CPACK_VERBATIM_VARIABLES)
+        _cpack_escape_for_cmake(value "${${var}}")
+      else()
+        set(value "${${var}}")
+      endif()
+
+      set(commands "${commands}\nSET(${var} \"${value}\")")
+    endif()
+  endforeach()
+
+  set(_CPACK_OTHER_VARIABLES_ "${commands}" PARENT_SCOPE)
+endfunction()
+
+# Internal use functions
+function(_cpack_set_default name value)
+  if(NOT DEFINED "${name}")
+    set("${name}" "${value}" PARENT_SCOPE)
+  endif()
+endfunction()
+
+function(_cpack_escape_for_cmake var value)
+  string(REGEX REPLACE "([\\\$\"])" "\\\\\\1" escaped "${value}")
+  set("${var}" "${escaped}" PARENT_SCOPE)
+endfunction()
+
+# Set the package name
+_cpack_set_default(CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
+_cpack_set_default(CPACK_PACKAGE_VERSION_MAJOR "0")
+_cpack_set_default(CPACK_PACKAGE_VERSION_MINOR "1")
+_cpack_set_default(CPACK_PACKAGE_VERSION_PATCH "1")
+_cpack_set_default(CPACK_PACKAGE_VERSION
+  "${CPACK_PACKAGE_VERSION_MAJOR}.${CPACK_PACKAGE_VERSION_MINOR}.${CPACK_PACKAGE_VERSION_PATCH}")
+_cpack_set_default(CPACK_PACKAGE_VENDOR "Humanity")
+_cpack_set_default(CPACK_PACKAGE_DESCRIPTION_SUMMARY
+  "${CMAKE_PROJECT_NAME} built using CMake")
+
+_cpack_set_default(CPACK_PACKAGE_DESCRIPTION_FILE
+  "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt")
+_cpack_set_default(CPACK_RESOURCE_FILE_LICENSE
+  "${CMAKE_ROOT}/Templates/CPack.GenericLicense.txt")
+_cpack_set_default(CPACK_RESOURCE_FILE_README
+  "${CMAKE_ROOT}/Templates/CPack.GenericDescription.txt")
+_cpack_set_default(CPACK_RESOURCE_FILE_WELCOME
+  "${CMAKE_ROOT}/Templates/CPack.GenericWelcome.txt")
+
+_cpack_set_default(CPACK_MODULE_PATH "${CMAKE_MODULE_PATH}")
+
+if(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL)
+  set(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)
+endif()
+
+if(CPACK_NSIS_MODIFY_PATH)
+  set(CPACK_NSIS_MODIFY_PATH ON)
+endif()
+
+set(__cpack_system_name ${CMAKE_SYSTEM_NAME})
+if(__cpack_system_name MATCHES "Windows")
+  if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+    set(__cpack_system_name win64)
+  else()
+    set(__cpack_system_name win32)
+  endif()
+endif()
+_cpack_set_default(CPACK_SYSTEM_NAME "${__cpack_system_name}")
+
+# Root dir: default value should be the string literal "$PROGRAMFILES"
+# for backwards compatibility. Projects may set this value to anything.
+# When creating 64 bit binaries we set the default value to "$PROGRAMFILES64"
+if("x${__cpack_system_name}" STREQUAL "xwin64")
+  set(__cpack_root_default "$PROGRAMFILES64")
+else()
+  set(__cpack_root_default "$PROGRAMFILES")
+endif()
+_cpack_set_default(CPACK_NSIS_INSTALL_ROOT "${__cpack_root_default}")
+
+# <project>-<major>.<minor>.<patch>-<release>-<platform>.<pkgtype>
+_cpack_set_default(CPACK_PACKAGE_FILE_NAME
+  "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-${CPACK_SYSTEM_NAME}")
+_cpack_set_default(CPACK_PACKAGE_INSTALL_DIRECTORY
+  "${CPACK_PACKAGE_NAME} ${CPACK_PACKAGE_VERSION}")
+_cpack_set_default(CPACK_PACKAGE_INSTALL_REGISTRY_KEY
+  "${CPACK_PACKAGE_INSTALL_DIRECTORY}")
+_cpack_set_default(CPACK_PACKAGE_DEFAULT_LOCATION "/")
+_cpack_set_default(CPACK_PACKAGE_RELOCATABLE "true")
+
+# always force to exactly "true" or "false" for CPack.Info.plist.in:
+if(CPACK_PACKAGE_RELOCATABLE)
+  set(CPACK_PACKAGE_RELOCATABLE "true")
+else()
+  set(CPACK_PACKAGE_RELOCATABLE "false")
+endif()
+
+macro(cpack_check_file_exists file description)
+  if(NOT EXISTS "${file}")
+    message(SEND_ERROR "CPack ${description} file: \"${file}\" could not be found.")
+  endif()
+endmacro()
+
+cpack_check_file_exists("${CPACK_PACKAGE_DESCRIPTION_FILE}" "package description")
+cpack_check_file_exists("${CPACK_RESOURCE_FILE_LICENSE}"    "license resource")
+cpack_check_file_exists("${CPACK_RESOURCE_FILE_README}"     "readme resource")
+cpack_check_file_exists("${CPACK_RESOURCE_FILE_WELCOME}"    "welcome resource")
+
+macro(cpack_optional_append _list _cond _item)
+  if(${_cond})
+    set(${_list} ${${_list}} ${_item})
+  endif()
+endmacro()
+
+#.rst:
+# .. variable:: CPACK_BINARY_<GENNAME>
+#
+#  CPack generated options for binary generators. The CPack.cmake module
+#  generates (when CPACK_GENERATOR is not set) a set of CMake options (see
+#  CMake option command) which may then be used to select the CPack
+#  generator(s) to be used when launching the package target.
+#
+#  Provide options to choose generators we might check here if the required
+#  tools for the generates exist and set the defaults according to the results
+if(NOT CPACK_GENERATOR)
+  if(UNIX)
+    if(CYGWIN)
+      option(CPACK_BINARY_CYGWIN "Enable to build Cygwin binary packages" ON)
+    else()
+      if(APPLE)
+        option(CPACK_BINARY_BUNDLE       "Enable to build OSX bundles"      OFF)
+        option(CPACK_BINARY_DRAGNDROP    "Enable to build OSX Drag And Drop package" OFF)
+        option(CPACK_BINARY_OSXX11       "Enable to build OSX X11 packages"      OFF)
+        option(CPACK_BINARY_PACKAGEMAKER "Enable to build PackageMaker packages" OFF)
+      else()
+        option(CPACK_BINARY_TZ  "Enable to build TZ packages"     ON)
+      endif()
+      option(CPACK_BINARY_DEB  "Enable to build Debian packages"  OFF)
+      option(CPACK_BINARY_NSIS "Enable to build NSIS packages"    OFF)
+      option(CPACK_BINARY_RPM  "Enable to build RPM packages"     OFF)
+      option(CPACK_BINARY_STGZ "Enable to build STGZ packages"    ON)
+      option(CPACK_BINARY_TBZ2 "Enable to build TBZ2 packages"    OFF)
+      option(CPACK_BINARY_TGZ  "Enable to build TGZ packages"     ON)
+      option(CPACK_BINARY_TXZ  "Enable to build TXZ packages"     OFF)
+    endif()
+  else()
+    option(CPACK_BINARY_7Z   "Enable to build 7-Zip packages" OFF)
+    option(CPACK_BINARY_NSIS "Enable to build NSIS packages" ON)
+    option(CPACK_BINARY_WIX  "Enable to build WiX packages" OFF)
+    option(CPACK_BINARY_ZIP  "Enable to build ZIP packages" OFF)
+  endif()
+  option(CPACK_BINARY_IFW "Enable to build IFW packages" OFF)
+
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_7Z           7Z)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_BUNDLE       Bundle)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_CYGWIN       CygwinBinary)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_DEB          DEB)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_DRAGNDROP    DragNDrop)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_IFW          IFW)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_NSIS         NSIS)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_OSXX11       OSXX11)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_PACKAGEMAKER PackageMaker)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_RPM          RPM)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_STGZ         STGZ)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TBZ2         TBZ2)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TGZ          TGZ)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TXZ          TXZ)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_TZ           TZ)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_WIX          WIX)
+  cpack_optional_append(CPACK_GENERATOR  CPACK_BINARY_ZIP          ZIP)
+
+endif()
+
+# Provide options to choose source generators
+if(NOT CPACK_SOURCE_GENERATOR)
+  if(UNIX)
+    if(CYGWIN)
+      option(CPACK_SOURCE_CYGWIN "Enable to build Cygwin source packages" ON)
+    else()
+      option(CPACK_SOURCE_TBZ2 "Enable to build TBZ2 source packages" ON)
+      option(CPACK_SOURCE_TGZ  "Enable to build TGZ source packages"  ON)
+      option(CPACK_SOURCE_TXZ  "Enable to build TXZ source packages"  ON)
+      option(CPACK_SOURCE_TZ   "Enable to build TZ source packages"   ON)
+      option(CPACK_SOURCE_ZIP  "Enable to build ZIP source packages"  OFF)
+    endif()
+  else()
+    option(CPACK_SOURCE_7Z  "Enable to build 7-Zip source packages" ON)
+    option(CPACK_SOURCE_ZIP "Enable to build ZIP source packages" ON)
+  endif()
+
+  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_7Z      7Z)
+  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_CYGWIN  CygwinSource)
+  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TBZ2    TBZ2)
+  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TGZ     TGZ)
+  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TXZ     TXZ)
+  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_TZ      TZ)
+  cpack_optional_append(CPACK_SOURCE_GENERATOR  CPACK_SOURCE_ZIP     ZIP)
+endif()
+
+# mark the above options as advanced
+mark_as_advanced(
+  CPACK_BINARY_7Z
+  CPACK_BINARY_BUNDLE
+  CPACK_BINARY_CYGWIN
+  CPACK_BINARY_DEB
+  CPACK_BINARY_DRAGNDROP
+  CPACK_BINARY_IFW
+  CPACK_BINARY_NSIS
+  CPACK_BINARY_OSXX11
+  CPACK_BINARY_PACKAGEMAKER
+  CPACK_BINARY_RPM
+  CPACK_BINARY_STGZ
+  CPACK_BINARY_TBZ2
+  CPACK_BINARY_TGZ
+  CPACK_BINARY_TXZ
+  CPACK_BINARY_TZ
+  CPACK_BINARY_WIX
+  CPACK_BINARY_ZIP
+  CPACK_SOURCE_7Z
+  CPACK_SOURCE_CYGWIN
+  CPACK_SOURCE_TBZ2
+  CPACK_SOURCE_TGZ
+  CPACK_SOURCE_TXZ
+  CPACK_SOURCE_TZ
+  CPACK_SOURCE_ZIP
+  )
+
+# Set some other variables
+_cpack_set_default(CPACK_INSTALL_CMAKE_PROJECTS
+  "${CMAKE_BINARY_DIR};${CMAKE_PROJECT_NAME};ALL;/")
+_cpack_set_default(CPACK_CMAKE_GENERATOR "${CMAKE_GENERATOR}")
+_cpack_set_default(CPACK_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}")
+# if the user has set CPACK_NSIS_DISPLAY_NAME remember it
+if(DEFINED CPACK_NSIS_DISPLAY_NAME)
+  set(CPACK_NSIS_DISPLAY_NAME_SET TRUE)
+endif()
+# if the user has set CPACK_NSIS_DISPLAY
+# explicitly, then use that as the default
+# value of CPACK_NSIS_PACKAGE_NAME  instead
+# of CPACK_PACKAGE_INSTALL_DIRECTORY
+_cpack_set_default(CPACK_NSIS_DISPLAY_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}")
+
+if(CPACK_NSIS_DISPLAY_NAME_SET)
+  _cpack_set_default(CPACK_NSIS_PACKAGE_NAME "${CPACK_NSIS_DISPLAY_NAME}")
+else()
+  _cpack_set_default(CPACK_NSIS_PACKAGE_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}")
+endif()
+
+_cpack_set_default(CPACK_OUTPUT_CONFIG_FILE
+  "${CMAKE_BINARY_DIR}/CPackConfig.cmake")
+
+_cpack_set_default(CPACK_SOURCE_OUTPUT_CONFIG_FILE
+  "${CMAKE_BINARY_DIR}/CPackSourceConfig.cmake")
+
+_cpack_set_default(CPACK_SET_DESTDIR OFF)
+_cpack_set_default(CPACK_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}")
+
+_cpack_set_default(CPACK_NSIS_INSTALLER_ICON_CODE "")
+_cpack_set_default(CPACK_NSIS_INSTALLER_MUI_ICON_CODE "")
+
+# WiX specific variables
+_cpack_set_default(CPACK_WIX_SIZEOF_VOID_P "${CMAKE_SIZEOF_VOID_P}")
+
+# set sysroot so SDK tools can be used
+if(CMAKE_OSX_SYSROOT)
+  _cpack_set_default(CPACK_OSX_SYSROOT "${_CMAKE_OSX_SYSROOT_PATH}")
+endif()
+
+if(DEFINED CPACK_COMPONENTS_ALL)
+  if(CPACK_MONOLITHIC_INSTALL)
+    message("CPack warning: both CPACK_COMPONENTS_ALL and CPACK_MONOLITHIC_INSTALL have been set.\nDefaulting to a monolithic installation.")
+    set(CPACK_COMPONENTS_ALL)
+  else()
+    # The user has provided the set of components to be installed as
+    # part of a component-based installation; trust her.
+    set(CPACK_COMPONENTS_ALL_SET_BY_USER TRUE)
+  endif()
+else()
+  # If the user has not specifically requested a monolithic installer
+  # but has specified components in various "install" commands, tell
+  # CPack about those components.
+  if(NOT CPACK_MONOLITHIC_INSTALL)
+    get_cmake_property(CPACK_COMPONENTS_ALL COMPONENTS)
+    list(LENGTH CPACK_COMPONENTS_ALL CPACK_COMPONENTS_LEN)
+    if(CPACK_COMPONENTS_LEN EQUAL 1)
+      # Only one component: this is not a component-based installation
+      # (at least, it isn't a component-based installation, but may
+      # become one later if the user uses the cpack_add_* commands).
+      set(CPACK_COMPONENTS_ALL)
+    endif()
+    set(CPACK_COMPONENTS_LEN)
+  endif()
+endif()
+
+# CMake always generates a component named "Unspecified", which is
+# used to install everything that doesn't have an explicitly-provided
+# component. Since these files should always be installed, we'll make
+# them hidden and required.
+set(CPACK_COMPONENT_UNSPECIFIED_HIDDEN TRUE)
+set(CPACK_COMPONENT_UNSPECIFIED_REQUIRED TRUE)
+
+cpack_encode_variables()
+configure_file("${cpack_input_file}" "${CPACK_OUTPUT_CONFIG_FILE}" @ONLY)
+
+# Generate source file
+_cpack_set_default(CPACK_SOURCE_INSTALLED_DIRECTORIES
+  "${CMAKE_SOURCE_DIR};/")
+_cpack_set_default(CPACK_SOURCE_TOPLEVEL_TAG "${CPACK_SYSTEM_NAME}-Source")
+_cpack_set_default(CPACK_SOURCE_PACKAGE_FILE_NAME
+  "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}-Source")
+
+set(__cpack_source_ignore_files_default
+  "/CVS/;/\\.svn/;/\\.bzr/;/\\.hg/;/\\.git/;\\.swp$;\\.#;/#")
+if(NOT CPACK_VERBATIM_VARIABLES)
+  _cpack_escape_for_cmake(__cpack_source_ignore_files_default
+    "${__cpack_source_ignore_files_default}")
+endif()
+_cpack_set_default(CPACK_SOURCE_IGNORE_FILES "${__cpack_source_ignore_files_default}")
+
+set(CPACK_INSTALL_CMAKE_PROJECTS "${CPACK_SOURCE_INSTALL_CMAKE_PROJECTS}")
+set(CPACK_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES}")
+set(CPACK_GENERATOR "${CPACK_SOURCE_GENERATOR}")
+set(CPACK_TOPLEVEL_TAG "${CPACK_SOURCE_TOPLEVEL_TAG}")
+set(CPACK_PACKAGE_FILE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}")
+set(CPACK_IGNORE_FILES "${CPACK_SOURCE_IGNORE_FILES}")
+set(CPACK_STRIP_FILES "${CPACK_SOURCE_STRIP_FILES}")
+
+cpack_encode_variables()
+configure_file("${cpack_source_input_file}"
+  "${CPACK_SOURCE_OUTPUT_CONFIG_FILE}" @ONLY)
diff --git a/share/cmake-3.2/Modules/CPack.distribution.dist.in b/share/cmake-3.6/Modules/CPack.distribution.dist.in
similarity index 100%
rename from share/cmake-3.2/Modules/CPack.distribution.dist.in
rename to share/cmake-3.6/Modules/CPack.distribution.dist.in
diff --git a/share/cmake-3.6/Modules/CPackBundle.cmake b/share/cmake-3.6/Modules/CPackBundle.cmake
new file mode 100644
index 0000000..b412216
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackBundle.cmake
@@ -0,0 +1,80 @@
+#.rst:
+# CPackBundle
+# -----------
+#
+# CPack Bundle generator (Mac OS X) specific options
+#
+# Variables specific to CPack Bundle generator
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# Installers built on Mac OS X using the Bundle generator use the
+# aforementioned DragNDrop (CPACK_DMG_xxx) variables, plus the following
+# Bundle-specific parameters (CPACK_BUNDLE_xxx).
+#
+# .. variable:: CPACK_BUNDLE_NAME
+#
+#  The name of the generated bundle. This appears in the OSX finder as the
+#  bundle name. Required.
+#
+# .. variable:: CPACK_BUNDLE_PLIST
+#
+#  Path to an OSX plist file that will be used for the generated bundle. This
+#  assumes that the caller has generated or specified their own Info.plist
+#  file. Required.
+#
+# .. variable:: CPACK_BUNDLE_ICON
+#
+#  Path to an OSX icon file that will be used as the icon for the generated
+#  bundle. This is the icon that appears in the OSX finder for the bundle, and
+#  in the OSX dock when the bundle is opened.  Required.
+#
+# .. variable:: CPACK_BUNDLE_STARTUP_COMMAND
+#
+#  Path to a startup script. This is a path to an executable or script that
+#  will be run whenever an end-user double-clicks the generated bundle in the
+#  OSX Finder. Optional.
+#
+# .. variable:: CPACK_BUNDLE_APPLE_CERT_APP
+#
+#  The name of your Apple supplied code signing certificate for the application.
+#  The name usually takes the form "Developer ID Application: [Name]" or
+#  "3rd Party Mac Developer Application: [Name]". If this variable is not set
+#  the application will not be signed.
+#
+# .. variable:: CPACK_BUNDLE_APPLE_ENTITLEMENTS
+#
+#  The name of the plist file that contains your apple entitlements for sandboxing
+#  your application. This file is required for submission to the Mac App Store.
+#
+# .. variable:: CPACK_BUNDLE_APPLE_CODESIGN_FILES
+#
+#  A list of additional files that you wish to be signed. You do not need to
+#  list the main application folder, or the main executable. You should
+#  list any frameworks and plugins that are included in your app bundle.
+#
+# .. variable:: CPACK_BUNDLE_APPLE_CODESIGN_PARAMETER
+#
+#  Additional parameter that will passed to codesign.
+#  Default value: "--deep -f"
+#
+# .. variable:: CPACK_COMMAND_CODESIGN
+#
+#  Path to the codesign(1) command used to sign applications with an
+#  Apple cert. This variable can be used to override the automatically
+#  detected command (or specify its location if the auto-detection fails
+#  to find it.)
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#Bundle Generator specific code should be put here
diff --git a/share/cmake-3.6/Modules/CPackComponent.cmake b/share/cmake-3.6/Modules/CPackComponent.cmake
new file mode 100644
index 0000000..038a717
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackComponent.cmake
@@ -0,0 +1,539 @@
+#.rst:
+# CPackComponent
+# --------------
+#
+# Build binary and source package installers
+#
+# Variables concerning CPack Components
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# The CPackComponent module is the module which handles the component
+# part of CPack.  See CPack module for general information about CPack.
+#
+# For certain kinds of binary installers (including the graphical
+# installers on Mac OS X and Windows), CPack generates installers that
+# allow users to select individual application components to install.
+# The contents of each of the components are identified by the COMPONENT
+# argument of CMake's INSTALL command.  These components can be
+# annotated with user-friendly names and descriptions, inter-component
+# dependencies, etc., and grouped in various ways to customize the
+# resulting installer.  See the cpack_add_* commands, described below,
+# for more information about component-specific installations.
+#
+# Component-specific installation allows users to select specific sets
+# of components to install during the install process.  Installation
+# components are identified by the COMPONENT argument of CMake's INSTALL
+# commands, and should be further described by the following CPack
+# commands:
+#
+# .. variable:: CPACK_COMPONENTS_ALL
+#
+#  The list of component to install.
+#
+#  The default value of this variable is computed by CPack and contains all
+#  components defined by the project.  The user may set it to only include the
+#  specified components.
+#
+# .. variable:: CPACK_<GENNAME>_COMPONENT_INSTALL
+#
+#  Enable/Disable component install for CPack generator <GENNAME>.
+#
+#  Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy
+#  default behavior.  e.g.  RPM builds monolithic whereas NSIS builds
+#  component.  One can change the default behavior by setting this variable to
+#  0/1 or OFF/ON.
+#
+# .. variable:: CPACK_COMPONENTS_GROUPING
+#
+#  Specify how components are grouped for multi-package component-aware CPack
+#  generators.
+#
+#  Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates
+#  several packages files when asked for component packaging.  They group
+#  the component differently depending on the value of this variable:
+#
+#  * ONE_PER_GROUP (default): creates one package file per component group
+#  * ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) component
+#  * IGNORE : creates one package per component, i.e. IGNORE component group
+#
+#  One can specify different grouping for different CPack generator by
+#  using a CPACK_PROJECT_CONFIG_FILE.
+#
+# .. variable:: CPACK_COMPONENT_<compName>_DISPLAY_NAME
+#
+#  The name to be displayed for a component.
+#
+# .. variable:: CPACK_COMPONENT_<compName>_DESCRIPTION
+#
+#  The description of a component.
+#
+# .. variable:: CPACK_COMPONENT_<compName>_GROUP
+#
+#  The group of a component.
+#
+# .. variable:: CPACK_COMPONENT_<compName>_DEPENDS
+#
+#  The dependencies (list of components) on which this component depends.
+#
+# .. variable:: CPACK_COMPONENT_<compName>_REQUIRED
+#
+#  True is this component is required.
+#
+# .. command:: cpack_add_component
+#
+# Describes a CPack installation
+# component named by the COMPONENT argument to a CMake INSTALL command.
+#
+# ::
+#
+#   cpack_add_component(compname
+#                       [DISPLAY_NAME name]
+#                       [DESCRIPTION description]
+#                       [HIDDEN | REQUIRED | DISABLED ]
+#                       [GROUP group]
+#                       [DEPENDS comp1 comp2 ... ]
+#                       [INSTALL_TYPES type1 type2 ... ]
+#                       [DOWNLOADED]
+#                       [ARCHIVE_FILE filename])
+#
+#
+#
+# The cmake_add_component command describes an installation component,
+# which the user can opt to install or remove as part of the graphical
+# installation process.  compname is the name of the component, as
+# provided to the COMPONENT argument of one or more CMake INSTALL
+# commands.
+#
+# DISPLAY_NAME is the displayed name of the component, used in graphical
+# installers to display the component name.  This value can be any
+# string.
+#
+# DESCRIPTION is an extended description of the component, used in
+# graphical installers to give the user additional information about the
+# component.  Descriptions can span multiple lines using ``\n`` as the
+# line separator.  Typically, these descriptions should be no more than
+# a few lines long.
+#
+# HIDDEN indicates that this component will be hidden in the graphical
+# installer, so that the user cannot directly change whether it is
+# installed or not.
+#
+# REQUIRED indicates that this component is required, and therefore will
+# always be installed.  It will be visible in the graphical installer,
+# but it cannot be unselected.  (Typically, required components are
+# shown greyed out).
+#
+# DISABLED indicates that this component should be disabled (unselected)
+# by default.  The user is free to select this component for
+# installation, unless it is also HIDDEN.
+#
+# DEPENDS lists the components on which this component depends.  If this
+# component is selected, then each of the components listed must also be
+# selected.  The dependency information is encoded within the installer
+# itself, so that users cannot install inconsistent sets of components.
+#
+# GROUP names the component group of which this component is a part.  If
+# not provided, the component will be a standalone component, not part
+# of any component group.  Component groups are described with the
+# cpack_add_component_group command, detailed below.
+#
+# INSTALL_TYPES lists the installation types of which this component is
+# a part.  When one of these installations types is selected, this
+# component will automatically be selected.  Installation types are
+# described with the cpack_add_install_type command, detailed below.
+#
+# DOWNLOADED indicates that this component should be downloaded
+# on-the-fly by the installer, rather than packaged in with the
+# installer itself.  For more information, see the
+# cpack_configure_downloads command.
+#
+# ARCHIVE_FILE provides a name for the archive file created by CPack to
+# be used for downloaded components.  If not supplied, CPack will create
+# a file with some name based on CPACK_PACKAGE_FILE_NAME and the name of
+# the component.  See cpack_configure_downloads for more information.
+#
+# .. command:: cpack_add_component_group
+#
+# Describes a group of related CPack installation components.
+#
+# ::
+#
+#   cpack_add_component_group(groupname
+#                            [DISPLAY_NAME name]
+#                            [DESCRIPTION description]
+#                            [PARENT_GROUP parent]
+#                            [EXPANDED]
+#                            [BOLD_TITLE])
+#
+#
+#
+# The cpack_add_component_group describes a group of installation
+# components, which will be placed together within the listing of
+# options.  Typically, component groups allow the user to
+# select/deselect all of the components within a single group via a
+# single group-level option.  Use component groups to reduce the
+# complexity of installers with many options.  groupname is an arbitrary
+# name used to identify the group in the GROUP argument of the
+# cpack_add_component command, which is used to place a component in a
+# group.  The name of the group must not conflict with the name of any
+# component.
+#
+# DISPLAY_NAME is the displayed name of the component group, used in
+# graphical installers to display the component group name.  This value
+# can be any string.
+#
+# DESCRIPTION is an extended description of the component group, used in
+# graphical installers to give the user additional information about the
+# components within that group.  Descriptions can span multiple lines
+# using ``\n`` as the line separator.  Typically, these descriptions
+# should be no more than a few lines long.
+#
+# PARENT_GROUP, if supplied, names the parent group of this group.
+# Parent groups are used to establish a hierarchy of groups, providing
+# an arbitrary hierarchy of groups.
+#
+# EXPANDED indicates that, by default, the group should show up as
+# "expanded", so that the user immediately sees all of the components
+# within the group.  Otherwise, the group will initially show up as a
+# single entry.
+#
+# BOLD_TITLE indicates that the group title should appear in bold, to
+# call the user's attention to the group.
+#
+# .. command:: cpack_add_install_type
+#
+# Add a new installation type containing
+# a set of predefined component selections to the graphical installer.
+#
+# ::
+#
+#   cpack_add_install_type(typename
+#                          [DISPLAY_NAME name])
+#
+#
+#
+# The cpack_add_install_type command identifies a set of preselected
+# components that represents a common use case for an application.  For
+# example, a "Developer" install type might include an application along
+# with its header and library files, while an "End user" install type
+# might just include the application's executable.  Each component
+# identifies itself with one or more install types via the INSTALL_TYPES
+# argument to cpack_add_component.
+#
+# DISPLAY_NAME is the displayed name of the install type, which will
+# typically show up in a drop-down box within a graphical installer.
+# This value can be any string.
+#
+# .. command:: cpack_configure_downloads
+#
+# Configure CPack to download
+# selected components on-the-fly as part of the installation process.
+#
+# ::
+#
+#   cpack_configure_downloads(site
+#                             [UPLOAD_DIRECTORY dirname]
+#                             [ALL]
+#                             [ADD_REMOVE|NO_ADD_REMOVE])
+#
+#
+#
+# The cpack_configure_downloads command configures installation-time
+# downloads of selected components.  For each downloadable component,
+# CPack will create an archive containing the contents of that
+# component, which should be uploaded to the given site.  When the user
+# selects that component for installation, the installer will download
+# and extract the component in place.  This feature is useful for
+# creating small installers that only download the requested components,
+# saving bandwidth.  Additionally, the installers are small enough that
+# they will be installed as part of the normal installation process, and
+# the "Change" button in Windows Add/Remove Programs control panel will
+# allow one to add or remove parts of the application after the original
+# installation.  On Windows, the downloaded-components functionality
+# requires the ZipDLL plug-in for NSIS, available at:
+#
+# ::
+#
+#   http://nsis.sourceforge.net/ZipDLL_plug-in
+#
+#
+#
+# On Mac OS X, installers that download components on-the-fly can only
+# be built and installed on system using Mac OS X 10.5 or later.
+#
+# The site argument is a URL where the archives for downloadable
+# components will reside, e.g.,
+# https://cmake.org/files/2.6.1/installer/ All of the archives
+# produced by CPack should be uploaded to that location.
+#
+# UPLOAD_DIRECTORY is the local directory where CPack will create the
+# various archives for each of the components.  The contents of this
+# directory should be uploaded to a location accessible by the URL given
+# in the site argument.  If omitted, CPack will use the directory
+# CPackUploads inside the CMake binary directory to store the generated
+# archives.
+#
+# The ALL flag indicates that all components be downloaded.  Otherwise,
+# only those components explicitly marked as DOWNLOADED or that have a
+# specified ARCHIVE_FILE will be downloaded.  Additionally, the ALL
+# option implies ADD_REMOVE (unless NO_ADD_REMOVE is specified).
+#
+# ADD_REMOVE indicates that CPack should install a copy of the installer
+# that can be called from Windows' Add/Remove Programs dialog (via the
+# "Modify" button) to change the set of installed components.
+# NO_ADD_REMOVE turns off this behavior.  This option is ignored on Mac
+# OS X.
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Define var in order to avoid multiple inclusion
+if(NOT CPackComponent_CMake_INCLUDED)
+set(CPackComponent_CMake_INCLUDED 1)
+
+# Argument-parsing macro from https://cmake.org/Wiki/CMakeMacroParseArguments
+macro(cpack_parse_arguments prefix arg_names option_names)
+  set(${prefix}_DEFAULT_ARGS)
+  foreach(arg_name ${arg_names})
+    set(${prefix}_${arg_name})
+  endforeach()
+  foreach(option ${option_names})
+    set(${prefix}_${option} FALSE)
+  endforeach()
+
+  set(current_arg_name DEFAULT_ARGS)
+  set(current_arg_list)
+  foreach(arg ${ARGN})
+    set(larg_names ${arg_names})
+    list(FIND larg_names "${arg}" is_arg_name)
+    if (is_arg_name GREATER -1)
+      set(${prefix}_${current_arg_name} ${current_arg_list})
+      set(current_arg_name ${arg})
+      set(current_arg_list)
+    else ()
+      set(loption_names ${option_names})
+      list(FIND loption_names "${arg}" is_option)
+      if (is_option GREATER -1)
+        set(${prefix}_${arg} TRUE)
+      else ()
+        set(current_arg_list ${current_arg_list} ${arg})
+      endif ()
+    endif ()
+  endforeach()
+  set(${prefix}_${current_arg_name} ${current_arg_list})
+endmacro()
+
+# Macro that appends a SET command for the given variable name (var)
+# to the macro named strvar, but only if the variable named "var"
+# has been defined. The string will eventually be appended to a CPack
+# configuration file.
+macro(cpack_append_variable_set_command var strvar)
+  if (DEFINED ${var})
+    set(${strvar} "${${strvar}}set(${var}")
+    foreach(APPENDVAL ${${var}})
+      set(${strvar} "${${strvar}} ${APPENDVAL}")
+    endforeach()
+    set(${strvar} "${${strvar}})\n")
+  endif ()
+endmacro()
+
+# Macro that appends a SET command for the given variable name (var)
+# to the macro named strvar, but only if the variable named "var"
+# has been defined and is a string. The string will eventually be
+# appended to a CPack configuration file.
+macro(cpack_append_string_variable_set_command var strvar)
+  if (DEFINED ${var})
+    list(LENGTH ${var} CPACK_APP_VALUE_LEN)
+    if(${CPACK_APP_VALUE_LEN} EQUAL 1)
+      set(${strvar} "${${strvar}}set(${var} \"${${var}}\")\n")
+    endif()
+  endif ()
+endmacro()
+
+# Macro that appends a SET command for the given variable name (var)
+# to the macro named strvar, but only if the variable named "var"
+# has been set to true. The string will eventually be
+# appended to a CPack configuration file.
+macro(cpack_append_option_set_command var strvar)
+  if (${var})
+    list(LENGTH ${var} CPACK_APP_VALUE_LEN)
+    if(${CPACK_APP_VALUE_LEN} EQUAL 1)
+      set(${strvar} "${${strvar}}set(${var} TRUE)\n")
+    endif()
+  endif ()
+endmacro()
+
+# Macro that adds a component to the CPack installer
+macro(cpack_add_component compname)
+  string(TOUPPER ${compname} _CPACK_ADDCOMP_UNAME)
+  cpack_parse_arguments(CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}
+    "DISPLAY_NAME;DESCRIPTION;GROUP;DEPENDS;INSTALL_TYPES;ARCHIVE_FILE"
+    "HIDDEN;REQUIRED;DISABLED;DOWNLOADED"
+    ${ARGN}
+    )
+
+  if (CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DOWNLOADED)
+    set(_CPACK_ADDCOMP_STR "\n# Configuration for downloaded component \"${compname}\"\n")
+  else ()
+    set(_CPACK_ADDCOMP_STR "\n# Configuration for component \"${compname}\"\n")
+  endif ()
+
+  if(NOT CPACK_MONOLITHIC_INSTALL)
+    # If the user didn't set CPACK_COMPONENTS_ALL explicitly, update the
+    # value of CPACK_COMPONENTS_ALL in the configuration file. This will
+    # take care of any components that have been added after the CPack
+    # moduled was included.
+    if(NOT CPACK_COMPONENTS_ALL_SET_BY_USER)
+      get_cmake_property(_CPACK_ADDCOMP_COMPONENTS COMPONENTS)
+      set(_CPACK_ADDCOMP_STR "${_CPACK_ADDCOMP_STR}\nSET(CPACK_COMPONENTS_ALL")
+      foreach(COMP ${_CPACK_ADDCOMP_COMPONENTS})
+       set(_CPACK_ADDCOMP_STR "${_CPACK_ADDCOMP_STR} ${COMP}")
+      endforeach()
+      set(_CPACK_ADDCOMP_STR "${_CPACK_ADDCOMP_STR})\n")
+    endif()
+  endif()
+
+  cpack_append_string_variable_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DISPLAY_NAME
+    _CPACK_ADDCOMP_STR)
+  cpack_append_string_variable_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DESCRIPTION
+    _CPACK_ADDCOMP_STR)
+  cpack_append_variable_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_GROUP
+    _CPACK_ADDCOMP_STR)
+  cpack_append_variable_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DEPENDS
+    _CPACK_ADDCOMP_STR)
+  cpack_append_variable_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_INSTALL_TYPES
+    _CPACK_ADDCOMP_STR)
+  cpack_append_string_variable_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_ARCHIVE_FILE
+    _CPACK_ADDCOMP_STR)
+  cpack_append_option_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_HIDDEN
+    _CPACK_ADDCOMP_STR)
+  cpack_append_option_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_REQUIRED
+    _CPACK_ADDCOMP_STR)
+  cpack_append_option_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DISABLED
+    _CPACK_ADDCOMP_STR)
+  cpack_append_option_set_command(
+    CPACK_COMPONENT_${_CPACK_ADDCOMP_UNAME}_DOWNLOADED
+    _CPACK_ADDCOMP_STR)
+  # Backward compatibility issue.
+  # Write to config iff the macros is used after CPack.cmake has been
+  # included, other it's not necessary because the variables
+  # will be encoded by cpack_encode_variables.
+  if(CPack_CMake_INCLUDED)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_ADDCOMP_STR}")
+  endif()
+endmacro()
+
+# Macro that adds a component group to the CPack installer
+macro(cpack_add_component_group grpname)
+  string(TOUPPER ${grpname} _CPACK_ADDGRP_UNAME)
+  cpack_parse_arguments(CPACK_COMPONENT_GROUP_${_CPACK_ADDGRP_UNAME}
+    "DISPLAY_NAME;DESCRIPTION;PARENT_GROUP"
+    "EXPANDED;BOLD_TITLE"
+    ${ARGN}
+    )
+
+  set(_CPACK_ADDGRP_STR "\n# Configuration for component group \"${grpname}\"\n")
+  cpack_append_string_variable_set_command(
+    CPACK_COMPONENT_GROUP_${_CPACK_ADDGRP_UNAME}_DISPLAY_NAME
+    _CPACK_ADDGRP_STR)
+  cpack_append_string_variable_set_command(
+    CPACK_COMPONENT_GROUP_${_CPACK_ADDGRP_UNAME}_DESCRIPTION
+    _CPACK_ADDGRP_STR)
+  cpack_append_string_variable_set_command(
+    CPACK_COMPONENT_GROUP_${_CPACK_ADDGRP_UNAME}_PARENT_GROUP
+    _CPACK_ADDGRP_STR)
+  cpack_append_option_set_command(
+    CPACK_COMPONENT_GROUP_${_CPACK_ADDGRP_UNAME}_EXPANDED
+    _CPACK_ADDGRP_STR)
+  cpack_append_option_set_command(
+    CPACK_COMPONENT_GROUP_${_CPACK_ADDGRP_UNAME}_BOLD_TITLE
+    _CPACK_ADDGRP_STR)
+  # Backward compatibility issue.
+  # Write to config iff the macros is used after CPack.cmake has been
+  # included, other it's not necessary because the variables
+  # will be encoded by cpack_encode_variables.
+  if(CPack_CMake_INCLUDED)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_ADDGRP_STR}")
+  endif()
+endmacro()
+
+# Macro that adds an installation type to the CPack installer
+macro(cpack_add_install_type insttype)
+  string(TOUPPER ${insttype} _CPACK_INSTTYPE_UNAME)
+  cpack_parse_arguments(CPACK_INSTALL_TYPE_${_CPACK_INSTTYPE_UNAME}
+    "DISPLAY_NAME"
+    ""
+    ${ARGN}
+    )
+
+  set(_CPACK_INSTTYPE_STR
+    "\n# Configuration for installation type \"${insttype}\"\n")
+  set(_CPACK_INSTTYPE_STR
+    "${_CPACK_INSTTYPE_STR}list(APPEND CPACK_ALL_INSTALL_TYPES ${insttype})\n")
+  cpack_append_string_variable_set_command(
+    CPACK_INSTALL_TYPE_${_CPACK_INSTTYPE_UNAME}_DISPLAY_NAME
+    _CPACK_INSTTYPE_STR)
+  # Backward compatibility issue.
+  # Write to config iff the macros is used after CPack.cmake has been
+  # included, other it's not necessary because the variables
+  # will be encoded by cpack_encode_variables.
+  if(CPack_CMake_INCLUDED)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_INSTTYPE_STR}")
+  endif()
+endmacro()
+
+macro(cpack_configure_downloads site)
+  cpack_parse_arguments(CPACK_DOWNLOAD
+    "UPLOAD_DIRECTORY"
+    "ALL;ADD_REMOVE;NO_ADD_REMOVE"
+    ${ARGN}
+    )
+
+  set(CPACK_CONFIG_DL_STR
+    "\n# Downloaded components configuration\n")
+  set(CPACK_UPLOAD_DIRECTORY ${CPACK_DOWNLOAD_UPLOAD_DIRECTORY})
+  set(CPACK_DOWNLOAD_SITE ${site})
+  cpack_append_string_variable_set_command(
+    CPACK_DOWNLOAD_SITE
+    CPACK_CONFIG_DL_STR)
+  cpack_append_string_variable_set_command(
+    CPACK_UPLOAD_DIRECTORY
+    CPACK_CONFIG_DL_STR)
+  cpack_append_option_set_command(
+    CPACK_DOWNLOAD_ALL
+    CPACK_CONFIG_DL_STR)
+  if (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE})
+    set(CPACK_DOWNLOAD_ADD_REMOVE ON)
+  endif ()
+  set(CPACK_ADD_REMOVE ${CPACK_DOWNLOAD_ADD_REMOVE})
+  cpack_append_option_set_command(
+    CPACK_ADD_REMOVE
+    CPACK_CONFIG_DL_STR)
+  # Backward compatibility issue.
+  # Write to config iff the macros is used after CPack.cmake has been
+  # included, other it's not necessary because the variables
+  # will be encoded by cpack_encode_variables.
+  if(CPack_CMake_INCLUDED)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_CONFIG_DL_STR}")
+  endif()
+endmacro()
+endif()
diff --git a/share/cmake-3.2/Modules/CPackCygwin.cmake b/share/cmake-3.6/Modules/CPackCygwin.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CPackCygwin.cmake
rename to share/cmake-3.6/Modules/CPackCygwin.cmake
diff --git a/share/cmake-3.6/Modules/CPackDMG.cmake b/share/cmake-3.6/Modules/CPackDMG.cmake
new file mode 100644
index 0000000..929b2f6
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackDMG.cmake
@@ -0,0 +1,115 @@
+#.rst:
+# CPackDMG
+# --------
+#
+# DragNDrop CPack generator (Mac OS X).
+#
+# Variables specific to CPack DragNDrop generator
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# The following variables are specific to the DragNDrop installers built
+# on Mac OS X:
+#
+# .. variable:: CPACK_DMG_VOLUME_NAME
+#
+#  The volume name of the generated disk image. Defaults to
+#  CPACK_PACKAGE_FILE_NAME.
+#
+# .. variable:: CPACK_DMG_FORMAT
+#
+#  The disk image format. Common values are UDRO (UDIF read-only), UDZO (UDIF
+#  zlib-compressed) or UDBZ (UDIF bzip2-compressed). Refer to hdiutil(1) for
+#  more information on other available formats. Defaults to UDZO.
+#
+# .. variable:: CPACK_DMG_DS_STORE
+#
+#  Path to a custom DS_Store file. This .DS_Store file e.g. can be used to
+#  specify the Finder window position/geometry and layout (such as hidden
+#  toolbars, placement of the icons etc.). This file has to be generated by
+#  the Finder (either manually or through AppleScript) using a normal folder
+#  from which the .DS_Store file can then be extracted.
+#
+# .. variable:: CPACK_DMG_DS_STORE_SETUP_SCRIPT
+#
+#  Path to a custom AppleScript file.  This AppleScript is used to generate
+#  a .DS_Store file which specifies the Finder window position/geometry and
+#  layout (such as hidden toolbars, placement of the icons etc.).
+#  By specifying a custom AppleScript there is no need to use
+#  CPACK_DMG_DS_STORE, as the .DS_Store that is generated by the AppleScript
+#  will be packaged.
+#
+# .. variable:: CPACK_DMG_BACKGROUND_IMAGE
+#
+#  Path to an image file to be used as the background.  This file will be
+#  copied to .background/background.<ext>, where ext is the original image file
+#  extension.  The background image is installed into the image before
+#  CPACK_DMG_DS_STORE_SETUP_SCRIPT is executed or CPACK_DMG_DS_STORE is
+#  installed.  By default no background image is set.
+#
+# .. variable:: CPACK_DMG_DISABLE_APPLICATIONS_SYMLINK
+#
+#  Default behaviour is to include a symlink to ``/Applications`` in the DMG.
+#  Set this option to ``ON`` to avoid adding the symlink.
+#
+# .. variable:: CPACK_DMG_SLA_DIR
+#
+#   Directory where license and menu files for different languages are stored.
+#   Setting this causes CPack to look for a ``<language>.menu.txt`` and
+#   ``<language>.license.txt`` file for every language defined in
+#   ``CPACK_DMG_SLA_LANGUAGES``. If both this variable and
+#   ``CPACK_RESOURCE_FILE_LICENSE`` are set, CPack will only look for the menu
+#   files and use the same license file for all languages.
+#
+# .. variable:: CPACK_DMG_SLA_LANGUAGES
+#
+#   Languages for which a license agreement is provided when mounting the
+#   generated DMG. A menu file consists of 9 lines of text. The first line is
+#   is the name of the language itself, uppercase, in English (e.g. German).
+#   The other lines are translations of the following strings:
+#
+#   - Agree
+#   - Disagree
+#   - Print
+#   - Save...
+#   - You agree to the terms of the License Agreement when you click the
+#     "Agree" button.
+#   - Software License Agreement
+#   - This text cannot be saved. The disk may be full or locked, or the file
+#     may be locked.
+#   - Unable to print. Make sure you have selected a printer.
+#
+#   For every language in this list, CPack will try to find files
+#   ``<language>.menu.txt`` and ``<language>.license.txt`` in the directory
+#   specified by the :variable:`CPACK_DMG_SLA_DIR` variable.
+#
+# .. variable:: CPACK_COMMAND_HDIUTIL
+#
+#  Path to the hdiutil(1) command used to operate on disk image files on Mac
+#  OS X. This variable can be used to override the automatically detected
+#  command (or specify its location if the auto-detection fails to find it.)
+#
+# .. variable:: CPACK_COMMAND_SETFILE
+#
+#  Path to the SetFile(1) command used to set extended attributes on files and
+#  directories on Mac OS X. This variable can be used to override the
+#  automatically detected command (or specify its location if the
+#  auto-detection fails to find it.)
+#
+# .. variable:: CPACK_COMMAND_REZ
+#
+#  Path to the Rez(1) command used to compile resources on Mac OS X. This
+#  variable can be used to override the automatically detected command (or
+#  specify its location if the auto-detection fails to find it.)
+
+#=============================================================================
+# Copyright 2006-2012 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
diff --git a/share/cmake-3.6/Modules/CPackDeb.cmake b/share/cmake-3.6/Modules/CPackDeb.cmake
new file mode 100644
index 0000000..c9678d6
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackDeb.cmake
@@ -0,0 +1,1024 @@
+#.rst:
+# CPackDeb
+# --------
+#
+# The built in (binary) CPack Deb generator (Unix only)
+#
+# Variables specific to CPack Debian (DEB) generator
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# CPackDeb may be used to create Deb package using :module:`CPack`.
+# CPackDeb is a :module:`CPack` generator thus it uses the ``CPACK_XXX``
+# variables used by :module:`CPack`.
+#
+# CPackDeb generator should work on any Linux host but it will produce
+# better deb package when Debian specific tools ``dpkg-xxx`` are usable on
+# the build system.
+#
+# CPackDeb has specific features which are controlled by the specifics
+# :code:`CPACK_DEBIAN_XXX` variables.
+#
+# :code:`CPACK_DEBIAN_<COMPONENT>_XXXX` variables may be used in order to have
+# **component** specific values.  Note however that ``<COMPONENT>`` refers to
+# the **grouping name** written in upper case. It may be either a component name
+# or a component GROUP name.
+#
+# Here are some CPackDeb wiki resources that are here for historic reasons and
+# are no longer maintained but may still prove useful:
+#
+#  - https://cmake.org/Wiki/CMake:CPackConfiguration
+#  - https://cmake.org/Wiki/CMake:CPackPackageGenerators#DEB_.28UNIX_only.29
+#
+# List of CPackRPM specific variables:
+#
+# .. variable:: CPACK_DEB_PACKAGE_COMPONENT
+#
+#  Enable component packaging for CPackRPM
+#
+#  * Mandatory : NO
+#  * Default   : OFF
+#
+#  If enabled (ON) multiple packages are generated. By default a single package
+#  containing files of all components is generated.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_NAME
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_NAME
+#
+#  Set Package control field (variable is automatically transformed to lower
+#  case).
+#
+#  * Mandatory : YES
+#  * Default   :
+#
+#    - :variable:`CPACK_PACKAGE_NAME` for non-component based
+#      installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_NAME` suffixed with -<COMPONENT>
+#      for component-based installations.
+#
+#  See https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-Source
+#
+# .. variable:: CPACK_DEBIAN_FILE_NAME
+#               CPACK_DEBIAN_<COMPONENT>_FILE_NAME
+#
+#  Package file name.
+#
+#  * Mandatory : YES
+#  * Default   : ``<CPACK_PACKAGE_FILE_NAME>[-<component>].deb``
+#
+#  This may be set to ``DEB-DEFAULT`` to allow CPackDeb to generate package file
+#  name by itself in deb format::
+#
+#    <PackageName>_<VersionNumber>-<DebianRevisionNumber>_<DebianArchitecture>.deb
+#
+#  Alternatively provided package file name must end with ``.deb`` suffix.
+#
+#  .. note::
+#
+#    Preferred setting of this variable is ``DEB-DEFAULT`` but for backward
+#    compatibility with CPackDeb in CMake prior to version 3.6 this feature
+#    is disabled by default.
+#
+#  .. note::
+#
+#    By using non default filenames duplicate names may occur. Duplicate files
+#    get overwritten and it is up to the packager to set the variables in a
+#    manner that will prevent such errors.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_VERSION
+#
+#  The Debian package version
+#
+#  * Mandatory : YES
+#  * Default   : :variable:`CPACK_PACKAGE_VERSION`
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_RELEASE
+#
+#  The Debian package release - Debian revision number.
+#
+#  * Mandatory : YES
+#  * Default   : 1
+#
+#  This is the numbering of the DEB package itself, i.e. the version of the
+#  packaging and not the version of the content (see
+#  :variable:`CPACK_DEBIAN_PACKAGE_VERSION`). One may change the default value
+#  if the previous packaging was buggy and/or you want to put here a fancy Linux
+#  distro specific numbering.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_ARCHITECTURE
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_ARCHITECTURE
+#
+#  The Debian package architecture
+#
+#  * Mandatory : YES
+#  * Default   : Output of :code:`dpkg --print-architecture` (or :code:`i386`
+#    if :code:`dpkg` is not found)
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_DEPENDS
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_DEPENDS
+#
+#  Sets the Debian dependencies of this package.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_DEPENDS` for component-based
+#      installations.
+#
+#  .. note::
+#
+#    If :variable:`CPACK_DEBIAN_PACKAGE_SHLIBDEPS` or
+#    more specifically :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_SHLIBDEPS`
+#    is set for this component, the discovered dependencies will be appended
+#    to :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_DEPENDS` instead of
+#    :variable:`CPACK_DEBIAN_PACKAGE_DEPENDS`. If
+#    :variable:`CPACK_DEBIAN_<COMPONENT>_PACKAGE_DEPENDS` is an empty string,
+#    only the automatically discovered dependencies will be set for this
+#    component.
+#
+#  Example::
+#
+#    set(CPACK_DEBIAN_PACKAGE_DEPENDS "libc6 (>= 2.3.1-6), libc6 (< 2.4)")
+#
+# .. variable:: CPACK_DEBIAN_ENABLE_COMPONENT_DEPENDS
+#
+#  Sets inter component dependencies if listed with
+#  :variable:`CPACK_COMPONENT_<compName>_DEPENDS` variables.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_MAINTAINER
+#
+#  The Debian package maintainer
+#
+#  * Mandatory : YES
+#  * Default   : :code:`CPACK_PACKAGE_CONTACT`
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_DESCRIPTION
+#               CPACK_COMPONENT_<COMPONENT>_DESCRIPTION
+#
+#  The Debian package description
+#
+#  * Mandatory : YES
+#  * Default   :
+#
+#    - :variable:`CPACK_DEBIAN_PACKAGE_DESCRIPTION` if set or
+#    - :variable:`CPACK_PACKAGE_DESCRIPTION_SUMMARY`
+#
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_SECTION
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_SECTION
+#
+#  Set Section control field e.g. admin, devel, doc, ...
+#
+#  * Mandatory : YES
+#  * Default   : "devel"
+#
+#  See https://www.debian.org/doc/debian-policy/ch-archive.html#s-subsections
+#
+# .. variable:: CPACK_DEBIAN_COMPRESSION_TYPE
+#
+#  The compression used for creating the Debian package.
+#
+#  * Mandatory : YES
+#  * Default   : "gzip"
+#
+#  Possible values are:
+#
+#  - lzma
+#  - xz
+#  - bzip2
+#  - gzip
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_PRIORITY
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_PRIORITY
+#
+#  Set Priority control field e.g. required, important, standard, optional,
+#  extra
+#
+#  * Mandatory : YES
+#  * Default   : "optional"
+#
+#  See https://www.debian.org/doc/debian-policy/ch-archive.html#s-priorities
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_HOMEPAGE
+#
+#  The URL of the web site for this package, preferably (when applicable) the
+#  site from which the original source can be obtained and any additional
+#  upstream documentation or information may be found.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  .. note::
+#
+#    The content of this field is a simple URL without any surrounding
+#    characters such as <>.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_SHLIBDEPS
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_SHLIBDEPS
+#
+#  May be set to ON in order to use :code:`dpkg-shlibdeps` to generate
+#  better package dependency list.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - :variable:`CPACK_DEBIAN_PACKAGE_SHLIBDEPS` if set or
+#    - OFF
+#
+#  .. note::
+#
+#    You may need set :variable:`CMAKE_INSTALL_RPATH` to an appropriate value
+#    if you use this feature, because if you don't :code:`dpkg-shlibdeps`
+#    may fail to find your own shared libs.
+#    See https://cmake.org/Wiki/CMake_RPATH_handling.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_DEBUG
+#
+#  May be set when invoking cpack in order to trace debug information
+#  during CPackDeb run.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_PREDEPENDS
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_PREDEPENDS
+#
+#  Sets the `Pre-Depends` field of the Debian package.
+#  Like :variable:`Depends <CPACK_DEBIAN_PACKAGE_DEPENDS>`, except that it
+#  also forces :code:`dpkg` to complete installation of the packages named
+#  before even starting the installation of the package which declares the
+#  pre-dependency.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_PREDEPENDS` for component-based
+#      installations.
+#
+#  See http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_ENHANCES
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_ENHANCES
+#
+#  Sets the `Enhances` field of the Debian package.
+#  Similar to :variable:`Suggests <CPACK_DEBIAN_PACKAGE_SUGGESTS>` but works
+#  in the opposite direction: declares that a package can enhance the
+#  functionality of another package.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_ENHANCES` for component-based
+#      installations.
+#
+#  See http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_BREAKS
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_BREAKS
+#
+#  Sets the `Breaks` field of the Debian package.
+#  When a binary package (P) declares that it breaks other packages (B),
+#  :code:`dpkg` will not allow the package (P) which declares `Breaks` be
+#  **unpacked** unless the packages that will be broken (B) are deconfigured
+#  first.
+#  As long as the package (P) is configured, the previously deconfigured
+#  packages (B) cannot be reconfigured again.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_BREAKS` for component-based
+#      installations.
+#
+#  See https://www.debian.org/doc/debian-policy/ch-relationships.html#s-breaks
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_CONFLICTS
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_CONFLICTS
+#
+#  Sets the `Conflicts` field of the Debian package.
+#  When one binary package declares a conflict with another using a `Conflicts`
+#  field, :code:`dpkg` will not allow them to be unpacked on the system at
+#  the same time.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_CONFLICTS` for component-based
+#      installations.
+#
+#  See https://www.debian.org/doc/debian-policy/ch-relationships.html#s-conflicts
+#
+#  .. note::
+#
+#    This is a stronger restriction than
+#    :variable:`Breaks <CPACK_DEBIAN_PACKAGE_BREAKS>`, which prevents the
+#    broken package from being configured while the breaking package is in
+#    the "Unpacked" state but allows both packages to be unpacked at the same
+#    time.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_PROVIDES
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_PROVIDES
+#
+#  Sets the `Provides` field of the Debian package.
+#  A virtual package is one which appears in the `Provides` control field of
+#  another package.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_PROVIDES` for component-based
+#      installations.
+#
+#  See https://www.debian.org/doc/debian-policy/ch-relationships.html#s-virtual
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_REPLACES
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_REPLACES
+#
+#  Sets the `Replaces` field of the Debian package.
+#  Packages can declare in their control file that they should overwrite
+#  files in certain other packages, or completely replace other packages.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_REPLACES` for component-based
+#      installations.
+#
+#  See http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_RECOMMENDS
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_RECOMMENDS
+#
+#  Sets the `Recommends` field of the Debian package.
+#  Allows packages to declare a strong, but not absolute, dependency on other
+#  packages.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_RECOMMENDS` for component-based
+#      installations.
+#
+#  See http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_SUGGESTS
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_SUGGESTS
+#
+#  Sets the `Suggests` field of the Debian package.
+#  Allows packages to declare a suggested package install grouping.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_SUGGESTS` for component-based
+#      installations.
+#
+#  See http://www.debian.org/doc/debian-policy/ch-relationships.html#s-binarydeps
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS
+#
+#  * Mandatory : NO
+#  * Default   : OFF
+#
+#  Allows to generate shlibs control file automatically. Compatibility is defined by
+#  :variable:`CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS_POLICY` variable value.
+#
+#  .. note::
+#
+#    Libraries are only considered if they have both library name and version
+#    set. This can be done by setting SOVERSION property with
+#    :command:`set_target_properties` command.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS_POLICY
+#
+#  Compatibility policy for auto-generated shlibs control file.
+#
+#  * Mandatory : NO
+#  * Default   : "="
+#
+#  Defines compatibility policy for auto-generated shlibs control file.
+#  Possible values: "=", ">="
+#
+#  See https://www.debian.org/doc/debian-policy/ch-sharedlibs.html#s-sharedlibs-shlibdeps
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_CONTROL_EXTRA
+#
+#  This variable allow advanced user to add custom script to the
+#  control.tar.gz.
+#  Typical usage is for conffiles, postinst, postrm, prerm.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  Usage::
+#
+#   set(CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
+#       "${CMAKE_CURRENT_SOURCE_DIR/prerm;${CMAKE_CURRENT_SOURCE_DIR}/postrm")
+#
+#  .. note::
+#
+#    The original permissions of the files will be used in the final
+#    package unless the variable
+#    :variable:`CPACK_DEBIAN_PACKAGE_CONTROL_STRICT_PERMISSION` is set.
+#    In particular, the scripts should have the proper executable
+#    flag prior to the generation of the package.
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_CONTROL_STRICT_PERMISSION
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_CONTROL_STRICT_PERMISSION
+#
+#  This variable indicates if the Debian policy on control files should be
+#  strictly followed.
+#
+#  * Mandatory : NO
+#  * Default   : FALSE
+#
+#  Usage::
+#
+#   set(CPACK_DEBIAN_PACKAGE_CONTROL_STRICT_PERMISSION TRUE)
+#
+#  .. note::
+#
+#    This overrides the permissions on the original files, following the rules
+#    set by Debian policy
+#    https://www.debian.org/doc/debian-policy/ch-files.html#s-permissions-owners
+#
+# .. variable:: CPACK_DEBIAN_PACKAGE_SOURCE
+#               CPACK_DEBIAN_<COMPONENT>_PACKAGE_SOURCE
+#
+#  Sets the ``Source`` field of the binary Debian package.
+#  When the binary package name is not the same as the source package name
+#  (in particular when several components/binaries are generated from one
+#  source) the source from which the binary has been generated should be
+#  indicated with the field ``Source``.
+#
+#  * Mandatory : NO
+#  * Default   :
+#
+#    - An empty string for non-component based installations
+#    - :variable:`CPACK_DEBIAN_PACKAGE_SOURCE` for component-based
+#      installations.
+#
+#  See https://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-Source
+#
+#  .. note::
+#
+#    This value is not interpreted. It is possible to pass an optional
+#    revision number of the referenced source package as well.
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+# Copyright 2007-2009 Mathieu Malaterre <mathieu.malaterre@gmail.com>
+# Copyright 2014-2016 Alexander Smorkalov <alexander.smorkalov@itseez.com>
+# Copyright 2014-2016 Roman Donchenko <roman.donchenko@itseez.com>
+# Copyright 2014-2016 Roman Kharitonov <roman.kharitonov@itseez.com>
+# Copyright 2014-2016 Ilya Lavrenov <ilya.lavrenov@itseez.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# CPack script for creating Debian package
+# Author: Mathieu Malaterre
+#
+# http://wiki.debian.org/HowToPackageForDebian
+
+if(CMAKE_BINARY_DIR)
+  message(FATAL_ERROR "CPackDeb.cmake may only be used by CPack internally.")
+endif()
+
+if(NOT UNIX)
+  message(FATAL_ERROR "CPackDeb.cmake may only be used under UNIX.")
+endif()
+
+function(cpack_deb_variable_fallback OUTPUT_VAR_NAME)
+  set(FALLBACK_VAR_NAMES ${ARGN})
+
+  foreach(variable_name IN LISTS FALLBACK_VAR_NAMES)
+    if(${variable_name})
+      set(${OUTPUT_VAR_NAME} "${${variable_name}}" PARENT_SCOPE)
+      break()
+    endif()
+  endforeach()
+endfunction()
+
+function(get_component_package_name var component)
+  string(TOUPPER "${component}" component_upcase)
+  if(CPACK_DEBIAN_${component_upcase}_PACKAGE_NAME)
+    string(TOLOWER "${CPACK_DEBIAN_${component_upcase}_PACKAGE_NAME}" package_name)
+  else()
+    string(TOLOWER "${CPACK_DEBIAN_PACKAGE_NAME}-${component}" package_name)
+  endif()
+
+  set("${var}" "${package_name}" PARENT_SCOPE)
+endfunction()
+
+#extract library name and version for given shared object
+function(extract_so_info shared_object libname version)
+  if(READELF_EXECUTABLE)
+    execute_process(COMMAND "${READELF_EXECUTABLE}" -d "${shared_object}"
+      WORKING_DIRECTORY "${CPACK_TEMPORARY_DIRECTORY}"
+      RESULT_VARIABLE result
+      OUTPUT_VARIABLE output
+      ERROR_QUIET
+      OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(result EQUAL 0)
+      string(REGEX MATCH "\\(SONAME\\)[^\n]*\\[([^\n]+)\\.so\\.([^\n]*)\\]" soname "${output}")
+      set(${libname} "${CMAKE_MATCH_1}" PARENT_SCOPE)
+      set(${version} "${CMAKE_MATCH_2}" PARENT_SCOPE)
+    else()
+      message(WARNING "Error running readelf for \"${shared_object}\"")
+    endif()
+  else()
+    message(FATAL_ERROR "Readelf utility is not available.")
+  endif()
+endfunction()
+
+function(cpack_deb_prepare_package_vars)
+  # CPACK_DEBIAN_PACKAGE_SHLIBDEPS
+  # If specify OFF, only user depends are used
+  if(NOT DEFINED CPACK_DEBIAN_PACKAGE_SHLIBDEPS)
+    set(CPACK_DEBIAN_PACKAGE_SHLIBDEPS OFF)
+  endif()
+
+  set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_DEB_PACKAGE_COMPONENT_PART_PATH}")
+
+  # per component automatic discover: some of the component might not have
+  # binaries.
+  if(CPACK_DEB_PACKAGE_COMPONENT)
+    string(TOUPPER "${CPACK_DEB_PACKAGE_COMPONENT}" _local_component_name)
+    set(_component_shlibdeps_var "CPACK_DEBIAN_${_local_component_name}_PACKAGE_SHLIBDEPS")
+
+    # if set, overrides the global configuration
+    if(DEFINED ${_component_shlibdeps_var})
+      set(CPACK_DEBIAN_PACKAGE_SHLIBDEPS "${${_component_shlibdeps_var}}")
+      if(CPACK_DEBIAN_PACKAGE_DEBUG)
+        message("CPackDeb Debug: component '${CPACK_DEB_PACKAGE_COMPONENT}' dpkg-shlibdeps set to ${CPACK_DEBIAN_PACKAGE_SHLIBDEPS}")
+      endif()
+    endif()
+  endif()
+
+  if(CPACK_DEBIAN_PACKAGE_SHLIBDEPS OR CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS)
+    # Generating binary list - Get type of all install files
+    cmake_policy(PUSH)
+      # Tell file(GLOB_RECURSE) not to follow directory symlinks
+      # even if the project does not set this policy to NEW.
+      cmake_policy(SET CMP0009 NEW)
+      file(GLOB_RECURSE FILE_PATHS_ LIST_DIRECTORIES false RELATIVE "${WDIR}" "${WDIR}/*")
+    cmake_policy(POP)
+
+    # get file info so that we can determine if file is executable or not
+    unset(CPACK_DEB_INSTALL_FILES)
+    foreach(FILE_ IN LISTS FILE_PATHS_)
+      execute_process(COMMAND file "./${FILE_}"
+        WORKING_DIRECTORY "${WDIR}"
+        OUTPUT_VARIABLE INSTALL_FILE_)
+      list(APPEND CPACK_DEB_INSTALL_FILES "${INSTALL_FILE_}")
+    endforeach()
+
+    # Only dynamically linked ELF files are included
+    # Extract only file name infront of ":"
+    foreach(_FILE IN LISTS CPACK_DEB_INSTALL_FILES)
+      if(_FILE MATCHES "ELF.*dynamically linked")
+        string(REGEX MATCH "(^.*):" _FILE_NAME "${_FILE}")
+        list(APPEND CPACK_DEB_BINARY_FILES "${CMAKE_MATCH_1}")
+        set(CONTAINS_EXECUTABLE_FILES_ TRUE)
+      endif()
+      if(_FILE MATCHES "ELF.*shared object")
+        string(REGEX MATCH "(^.*):" _FILE_NAME "${_FILE}")
+        list(APPEND CPACK_DEB_SHARED_OBJECT_FILES "${CMAKE_MATCH_1}")
+      endif()
+    endforeach()
+  endif()
+
+  if(CPACK_DEBIAN_PACKAGE_SHLIBDEPS)
+    # dpkg-shlibdeps is a Debian utility for generating dependency list
+    find_program(SHLIBDEPS_EXECUTABLE dpkg-shlibdeps)
+
+    if(SHLIBDEPS_EXECUTABLE)
+      # Check version of the dpkg-shlibdeps tool using CPackRPM method
+      execute_process(COMMAND env LC_ALL=C ${SHLIBDEPS_EXECUTABLE} --version
+        OUTPUT_VARIABLE _TMP_VERSION
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE)
+      if(_TMP_VERSION MATCHES "dpkg-shlibdeps version ([0-9]+\\.[0-9]+\\.[0-9]+)")
+        set(SHLIBDEPS_EXECUTABLE_VERSION "${CMAKE_MATCH_1}")
+      else()
+        set(SHLIBDEPS_EXECUTABLE_VERSION "")
+      endif()
+
+      if(CPACK_DEBIAN_PACKAGE_DEBUG)
+        message("CPackDeb Debug: dpkg-shlibdeps --version output is '${_TMP_VERSION}'")
+        message("CPackDeb Debug: dpkg-shlibdeps version is <${SHLIBDEPS_EXECUTABLE_VERSION}>")
+      endif()
+
+      if(CONTAINS_EXECUTABLE_FILES_)
+        message("CPackDeb: - Generating dependency list")
+
+        # Create blank control file for running dpkg-shlibdeps
+        # There might be some other way to invoke dpkg-shlibdeps without creating this file
+        # but standard debian package should not have anything that can collide with this file or directory
+        file(MAKE_DIRECTORY ${CPACK_TEMPORARY_DIRECTORY}/debian)
+        file(WRITE ${CPACK_TEMPORARY_DIRECTORY}/debian/control "")
+
+        # Create a DEBIAN directory so that dpkg-shlibdeps can find the package dir when resolving $ORIGIN.
+        file(MAKE_DIRECTORY "${CPACK_TEMPORARY_DIRECTORY}/DEBIAN")
+
+        # Add --ignore-missing-info if the tool supports it
+        execute_process(COMMAND env LC_ALL=C ${SHLIBDEPS_EXECUTABLE} --help
+          OUTPUT_VARIABLE _TMP_HELP
+          ERROR_QUIET
+          OUTPUT_STRIP_TRAILING_WHITESPACE)
+        if(_TMP_HELP MATCHES "--ignore-missing-info")
+          set(IGNORE_MISSING_INFO_FLAG "--ignore-missing-info")
+        endif()
+
+        # Execute dpkg-shlibdeps
+        # --ignore-missing-info : allow dpkg-shlibdeps to run even if some libs do not belong to a package
+        # -O : print to STDOUT
+        execute_process(COMMAND ${SHLIBDEPS_EXECUTABLE} ${IGNORE_MISSING_INFO_FLAG} -O ${CPACK_DEB_BINARY_FILES}
+          WORKING_DIRECTORY "${CPACK_TEMPORARY_DIRECTORY}"
+          OUTPUT_VARIABLE SHLIBDEPS_OUTPUT
+          RESULT_VARIABLE SHLIBDEPS_RESULT
+          ERROR_VARIABLE SHLIBDEPS_ERROR
+          OUTPUT_STRIP_TRAILING_WHITESPACE )
+        if(CPACK_DEBIAN_PACKAGE_DEBUG)
+          # dpkg-shlibdeps will throw some warnings if some input files are not binary
+          message( "CPackDeb Debug: dpkg-shlibdeps warnings \n${SHLIBDEPS_ERROR}")
+        endif()
+        if(NOT SHLIBDEPS_RESULT EQUAL 0)
+          message (FATAL_ERROR "CPackDeb: dpkg-shlibdeps: '${SHLIBDEPS_ERROR}';\n"
+              "executed command: '${SHLIBDEPS_EXECUTABLE} ${IGNORE_MISSING_INFO_FLAG} -O ${CPACK_DEB_BINARY_FILES}';\n"
+              "found files: '${INSTALL_FILE_}';\n"
+              "files info: '${CPACK_DEB_INSTALL_FILES}';\n"
+              "binary files: '${CPACK_DEB_BINARY_FILES}'")
+        endif()
+
+        #Get rid of prefix generated by dpkg-shlibdeps
+        string(REGEX REPLACE "^.*Depends=" "" CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS "${SHLIBDEPS_OUTPUT}")
+
+        if(CPACK_DEBIAN_PACKAGE_DEBUG)
+          message("CPackDeb Debug: Found dependency: ${CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS} from output ${SHLIBDEPS_OUTPUT}")
+        endif()
+
+        # Remove blank control file
+        # Might not be safe if package actual contain file or directory named debian
+        file(REMOVE_RECURSE "${CPACK_TEMPORARY_DIRECTORY}/debian")
+
+        # remove temporary directory that was created only for dpkg-shlibdeps execution
+        file(REMOVE_RECURSE "${CPACK_TEMPORARY_DIRECTORY}/DEBIAN")
+      else()
+        if(CPACK_DEBIAN_PACKAGE_DEBUG)
+          message(AUTHOR_WARNING "CPackDeb Debug: Using only user-provided depends because package does not contain executable files that link to shared libraries.")
+        endif()
+      endif()
+    else()
+      message("CPackDeb: Using only user-provided dependencies because dpkg-shlibdeps is not found.")
+    endif()
+
+  else()
+    if(CPACK_DEBIAN_PACKAGE_DEBUG)
+      message("CPackDeb Debug: Using only user-provided dependencies")
+    endif()
+  endif()
+
+  # Let's define the control file found in debian package:
+
+  # Binary package:
+  # http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-binarycontrolfiles
+
+  # DEBIAN/control
+  # debian policy enforce lower case for package name
+  # Package: (mandatory)
+  if(NOT CPACK_DEBIAN_PACKAGE_NAME)
+    string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_DEBIAN_PACKAGE_NAME)
+  endif()
+
+  # Version: (mandatory)
+  if(NOT CPACK_DEBIAN_PACKAGE_VERSION)
+    if(NOT CPACK_PACKAGE_VERSION)
+      message(FATAL_ERROR "CPackDeb: Debian package requires a package version")
+    endif()
+    set(CPACK_DEBIAN_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION})
+  endif()
+
+  # Architecture: (mandatory)
+  if(CPACK_DEB_PACKAGE_COMPONENT AND CPACK_DEBIAN_${_local_component_name}_PACKAGE_ARCHITECTURE)
+    set(CPACK_DEBIAN_PACKAGE_ARCHITECTURE "${CPACK_DEBIAN_${_local_component_name}_PACKAGE_ARCHITECTURE}")
+  elseif(NOT CPACK_DEBIAN_PACKAGE_ARCHITECTURE)
+    # There is no such thing as i686 architecture on debian, you should use i386 instead
+    # $ dpkg --print-architecture
+    find_program(DPKG_CMD dpkg)
+    if(NOT DPKG_CMD)
+      message(STATUS "CPackDeb: Can not find dpkg in your path, default to i386.")
+      set(CPACK_DEBIAN_PACKAGE_ARCHITECTURE i386)
+    endif()
+    execute_process(COMMAND "${DPKG_CMD}" --print-architecture
+      OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      )
+  endif()
+
+  # Source: (optional)
+  # in case several packages are constructed from a unique source
+  # (multipackaging), the source may be indicated as well.
+  # The source might contain a version if the generated package
+  # version is different from the source version
+  if(NOT CPACK_DEBIAN_PACKAGE_SOURCE)
+    set(CPACK_DEBIAN_PACKAGE_SOURCE "")
+  endif()
+
+  # have a look at get_property(result GLOBAL PROPERTY ENABLED_FEATURES),
+  # this returns the successful find_package() calls, maybe this can help
+  # Depends:
+  # You should set: DEBIAN_PACKAGE_DEPENDS
+  # TODO: automate 'objdump -p | grep NEEDED'
+
+  # if per-component variable, overrides the global CPACK_DEBIAN_PACKAGE_${variable_type_}
+  # automatic dependency discovery will be performed afterwards.
+  if(CPACK_DEB_PACKAGE_COMPONENT)
+    foreach(value_type_ DEPENDS RECOMMENDS SUGGESTS PREDEPENDS ENHANCES BREAKS CONFLICTS PROVIDES REPLACES SOURCE SECTION PRIORITY NAME)
+      set(_component_var "CPACK_DEBIAN_${_local_component_name}_PACKAGE_${value_type_}")
+
+      # if set, overrides the global variable
+      if(DEFINED ${_component_var})
+        set(CPACK_DEBIAN_PACKAGE_${value_type_} "${${_component_var}}")
+        if(CPACK_DEBIAN_PACKAGE_DEBUG)
+          message("CPackDeb Debug: component '${_local_component_name}' ${value_type_} "
+            "value set to '${CPACK_DEBIAN_PACKAGE_${value_type_}}'")
+        endif()
+      endif()
+    endforeach()
+
+    if(CPACK_DEBIAN_ENABLE_COMPONENT_DEPENDS)
+      set(COMPONENT_DEPENDS "")
+      foreach (_PACK ${CPACK_COMPONENT_${_local_component_name}_DEPENDS})
+        get_component_package_name(_PACK_NAME "${_PACK}")
+        if(COMPONENT_DEPENDS)
+          set(COMPONENT_DEPENDS "${_PACK_NAME} (= ${CPACK_DEBIAN_PACKAGE_VERSION}), ${COMPONENT_DEPENDS}")
+        else()
+          set(COMPONENT_DEPENDS "${_PACK_NAME} (= ${CPACK_DEBIAN_PACKAGE_VERSION})")
+        endif()
+      endforeach()
+      if(COMPONENT_DEPENDS)
+        if(CPACK_DEBIAN_PACKAGE_DEPENDS)
+          set(CPACK_DEBIAN_PACKAGE_DEPENDS "${COMPONENT_DEPENDS}, ${CPACK_DEBIAN_PACKAGE_DEPENDS}")
+        else()
+          set(CPACK_DEBIAN_PACKAGE_DEPENDS "${COMPONENT_DEPENDS}")
+        endif()
+      endif()
+    endif()
+  endif()
+
+  # at this point, the CPACK_DEBIAN_PACKAGE_DEPENDS is properly set
+  # to the minimal dependency of the package
+  # Append automatically discovered dependencies .
+  if(NOT "${CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS}" STREQUAL "")
+    if (CPACK_DEBIAN_PACKAGE_DEPENDS)
+      set (CPACK_DEBIAN_PACKAGE_DEPENDS "${CPACK_DEBIAN_PACKAGE_DEPENDS}, ${CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS}")
+    else ()
+      set (CPACK_DEBIAN_PACKAGE_DEPENDS "${CPACK_DEBIAN_PACKAGE_AUTO_DEPENDS}")
+    endif ()
+  endif()
+
+  if(NOT CPACK_DEBIAN_PACKAGE_DEPENDS)
+    message(STATUS "CPACK_DEBIAN_PACKAGE_DEPENDS not set, the package will have no dependencies.")
+  endif()
+
+  # Maintainer: (mandatory)
+  if(NOT CPACK_DEBIAN_PACKAGE_MAINTAINER)
+    if(NOT CPACK_PACKAGE_CONTACT)
+      message(FATAL_ERROR "CPackDeb: Debian package requires a maintainer for a package, set CPACK_PACKAGE_CONTACT or CPACK_DEBIAN_PACKAGE_MAINTAINER")
+    endif()
+    set(CPACK_DEBIAN_PACKAGE_MAINTAINER ${CPACK_PACKAGE_CONTACT})
+  endif()
+
+  # Description: (mandatory)
+  if(NOT CPACK_DEB_PACKAGE_COMPONENT)
+    if(NOT CPACK_DEBIAN_PACKAGE_DESCRIPTION)
+      if(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
+        message(FATAL_ERROR "CPackDeb: Debian package requires a summary for a package, set CPACK_PACKAGE_DESCRIPTION_SUMMARY or CPACK_DEBIAN_PACKAGE_DESCRIPTION")
+      endif()
+      set(CPACK_DEBIAN_PACKAGE_DESCRIPTION ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
+    endif()
+  else()
+    set(component_description_var CPACK_COMPONENT_${_local_component_name}_DESCRIPTION)
+
+    # component description overrides package description
+    if(${component_description_var})
+      set(CPACK_DEBIAN_PACKAGE_DESCRIPTION ${${component_description_var}})
+    elseif(NOT CPACK_DEBIAN_PACKAGE_DESCRIPTION)
+      if(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY)
+        message(FATAL_ERROR "CPackDeb: Debian package requires a summary for a package, set CPACK_PACKAGE_DESCRIPTION_SUMMARY or CPACK_DEBIAN_PACKAGE_DESCRIPTION or ${component_description_var}")
+      endif()
+      set(CPACK_DEBIAN_PACKAGE_DESCRIPTION ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
+    endif()
+  endif()
+
+  # Section: (recommended)
+  if(NOT CPACK_DEBIAN_PACKAGE_SECTION)
+    set(CPACK_DEBIAN_PACKAGE_SECTION "devel")
+  endif()
+
+  # Priority: (recommended)
+  if(NOT CPACK_DEBIAN_PACKAGE_PRIORITY)
+    set(CPACK_DEBIAN_PACKAGE_PRIORITY "optional")
+  endif()
+
+  # Compression: (recommended)
+  if(NOT CPACK_DEBIAN_COMPRESSION_TYPE)
+    set(CPACK_DEBIAN_COMPRESSION_TYPE "gzip")
+  endif()
+
+
+  # Recommends:
+  # You should set: CPACK_DEBIAN_PACKAGE_RECOMMENDS
+
+  # Suggests:
+  # You should set: CPACK_DEBIAN_PACKAGE_SUGGESTS
+
+  # CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
+  # This variable allow advanced user to add custom script to the control.tar.gz (inside the .deb archive)
+  # Typical examples are:
+  # - conffiles
+  # - postinst
+  # - postrm
+  # - prerm
+  # Usage:
+  # set(CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA
+  #    "${CMAKE_CURRENT_SOURCE_DIR/prerm;${CMAKE_CURRENT_SOURCE_DIR}/postrm")
+
+  # Are we packaging components ?
+  if(CPACK_DEB_PACKAGE_COMPONENT)
+    # override values with per component version if set
+    foreach(VAR_NAME_ "PACKAGE_CONTROL_EXTRA" "PACKAGE_CONTROL_STRICT_PERMISSION")
+      if(CPACK_DEBIAN_${_local_component_name}_${VAR_NAME_})
+        set(CPACK_DEBIAN_${VAR_NAME_} "${CPACK_DEBIAN_${_local_component_name}_${VAR_NAME_}}")
+      endif()
+    endforeach()
+    get_component_package_name(CPACK_DEBIAN_PACKAGE_NAME ${_local_component_name})
+  endif()
+
+  set(CPACK_DEBIAN_PACKAGE_SHLIBS_LIST "")
+
+  if (NOT CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS_POLICY)
+    set(CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS_POLICY "=")
+  endif()
+
+  find_program(READELF_EXECUTABLE NAMES readelf)
+
+  if(CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS)
+    if(READELF_EXECUTABLE)
+      foreach(_FILE IN LISTS CPACK_DEB_SHARED_OBJECT_FILES)
+        extract_so_info("${_FILE}" libname soversion)
+        if(libname AND soversion)
+          list(APPEND CPACK_DEBIAN_PACKAGE_SHLIBS_LIST
+               "${libname} ${soversion} ${CPACK_DEBIAN_PACKAGE_NAME} (${CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS_POLICY} ${CPACK_PACKAGE_VERSION})")
+        else()
+          message(AUTHOR_WARNING "Shared library '${_FILE}' is missing soname or soversion. Library will not be added to DEBIAN/shlibs control file.")
+        endif()
+      endforeach()
+      if (CPACK_DEBIAN_PACKAGE_SHLIBS_LIST)
+        string(REPLACE ";" "\n" CPACK_DEBIAN_PACKAGE_SHLIBS_LIST "${CPACK_DEBIAN_PACKAGE_SHLIBS_LIST}")
+      endif()
+    else()
+      message(FATAL_ERROR "Readelf utility is not available. CPACK_DEBIAN_PACKAGE_GENERATE_SHLIBS option is not available.")
+    endif()
+  endif()
+
+  # add ldconfig call in default postrm and postint
+  set(CPACK_ADD_LDCONFIG_CALL 0)
+  foreach(_FILE ${CPACK_DEB_SHARED_OBJECT_FILES})
+    get_filename_component(_DIR ${_FILE} DIRECTORY)
+    # all files in CPACK_DEB_SHARED_OBJECT_FILES have dot at the beginning
+    if(_DIR STREQUAL "./lib" OR _DIR STREQUAL "./usr/lib")
+      set(CPACK_ADD_LDCONFIG_CALL 1)
+    endif()
+  endforeach()
+
+  if(CPACK_ADD_LDCONFIG_CALL)
+    set(CPACK_DEBIAN_GENERATE_POSTINST 1)
+    set(CPACK_DEBIAN_GENERATE_POSTRM 1)
+    foreach(f ${PACKAGE_CONTROL_EXTRA})
+      get_filename_component(n "${f}" NAME)
+      if("${n}" STREQUAL "postinst")
+        set(CPACK_DEBIAN_GENERATE_POSTINST 0)
+      endif()
+      if("${n}" STREQUAL "postrm")
+        set(CPACK_DEBIAN_GENERATE_POSTRM 0)
+      endif()
+    endforeach()
+  else()
+    set(CPACK_DEBIAN_GENERATE_POSTINST 0)
+    set(CPACK_DEBIAN_GENERATE_POSTRM 0)
+  endif()
+
+  if(NOT CPACK_DEBIAN_PACKAGE_RELEASE)
+    set(CPACK_DEBIAN_PACKAGE_RELEASE 1)
+  endif()
+
+
+  cpack_deb_variable_fallback("CPACK_DEBIAN_FILE_NAME"
+    "CPACK_DEBIAN_${_local_component_name}_FILE_NAME"
+    "CPACK_DEBIAN_FILE_NAME")
+  if(CPACK_DEBIAN_FILE_NAME)
+    if(CPACK_DEBIAN_FILE_NAME STREQUAL "DEB-DEFAULT")
+      # Patch package file name to be in corrent debian format:
+      # <foo>_<VersionNumber>-<DebianRevisionNumber>_<DebianArchitecture>.deb
+      set(CPACK_OUTPUT_FILE_NAME
+        "${CPACK_DEBIAN_PACKAGE_NAME}_${CPACK_PACKAGE_VERSION}-${CPACK_DEBIAN_PACKAGE_RELEASE}_${CPACK_DEBIAN_PACKAGE_ARCHITECTURE}.deb")
+    else()
+      cmake_policy(PUSH)
+        cmake_policy(SET CMP0010 NEW)
+        if(NOT CPACK_DEBIAN_FILE_NAME MATCHES ".*\\.deb")
+      cmake_policy(POP)
+          message(FATAL_ERROR "'${CPACK_DEBIAN_FILE_NAME}' is not a valid DEB package file name as it must end with '.deb'!")
+        endif()
+      cmake_policy(POP)
+
+      set(CPACK_OUTPUT_FILE_NAME "${CPACK_DEBIAN_FILE_NAME}")
+    endif()
+
+    set(CPACK_TEMPORARY_PACKAGE_FILE_NAME "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_OUTPUT_FILE_NAME}")
+    get_filename_component(BINARY_DIR "${CPACK_OUTPUT_FILE_PATH}" DIRECTORY)
+    set(CPACK_OUTPUT_FILE_PATH "${BINARY_DIR}/${CPACK_OUTPUT_FILE_NAME}")
+  endif() # else() back compatibility - don't change the name
+
+  # Print out some debug information if we were asked for that
+  if(CPACK_DEBIAN_PACKAGE_DEBUG)
+     message("CPackDeb:Debug: CPACK_TOPLEVEL_DIRECTORY          = '${CPACK_TOPLEVEL_DIRECTORY}'")
+     message("CPackDeb:Debug: CPACK_TOPLEVEL_TAG                = '${CPACK_TOPLEVEL_TAG}'")
+     message("CPackDeb:Debug: CPACK_TEMPORARY_DIRECTORY         = '${CPACK_TEMPORARY_DIRECTORY}'")
+     message("CPackDeb:Debug: CPACK_OUTPUT_FILE_NAME            = '${CPACK_OUTPUT_FILE_NAME}'")
+     message("CPackDeb:Debug: CPACK_OUTPUT_FILE_PATH            = '${CPACK_OUTPUT_FILE_PATH}'")
+     message("CPackDeb:Debug: CPACK_PACKAGE_FILE_NAME           = '${CPACK_PACKAGE_FILE_NAME}'")
+     message("CPackDeb:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY   = '${CPACK_PACKAGE_INSTALL_DIRECTORY}'")
+     message("CPackDeb:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = '${CPACK_TEMPORARY_PACKAGE_FILE_NAME}'")
+     message("CPackDeb:Debug: CPACK_DEBIAN_PACKAGE_CONTROL_STRICT_PERMISSION = '${CPACK_DEBIAN_PACKAGE_CONTROL_STRICT_PERMISSION}'")
+     message("CPackDeb:Debug: CPACK_DEBIAN_PACKAGE_SOURCE       = '${CPACK_DEBIAN_PACKAGE_SOURCE}'")
+  endif()
+
+  # For debian source packages:
+  # debian/control
+  # http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-sourcecontrolfiles
+
+  # .dsc
+  # http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-debiansourcecontrolfiles
+
+  # Builds-Depends:
+  #if(NOT CPACK_DEBIAN_PACKAGE_BUILDS_DEPENDS)
+  #  set(CPACK_DEBIAN_PACKAGE_BUILDS_DEPENDS
+  #    "debhelper (>> 5.0.0), libncurses5-dev, tcl8.4"
+  #  )
+  #endif()
+
+  # move variables to parent scope so that they may be used to create debian package
+  set(GEN_CPACK_OUTPUT_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}" PARENT_SCOPE)
+  set(GEN_CPACK_TEMPORARY_PACKAGE_FILE_NAME "${CPACK_TEMPORARY_PACKAGE_FILE_NAME}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_NAME "${CPACK_DEBIAN_PACKAGE_NAME}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_VERSION "${CPACK_DEBIAN_PACKAGE_VERSION}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_SECTION "${CPACK_DEBIAN_PACKAGE_SECTION}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_PRIORITY "${CPACK_DEBIAN_PACKAGE_PRIORITY}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_ARCHITECTURE "${CPACK_DEBIAN_PACKAGE_ARCHITECTURE}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_MAINTAINER "${CPACK_DEBIAN_PACKAGE_MAINTAINER}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_DESCRIPTION "${CPACK_DEBIAN_PACKAGE_DESCRIPTION}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_DEPENDS "${CPACK_DEBIAN_PACKAGE_DEPENDS}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_COMPRESSION_TYPE "${CPACK_DEBIAN_COMPRESSION_TYPE}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_RECOMMENDS "${CPACK_DEBIAN_PACKAGE_RECOMMENDS}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_SUGGESTS "${CPACK_DEBIAN_PACKAGE_SUGGESTS}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_HOMEPAGE "${CPACK_DEBIAN_PACKAGE_HOMEPAGE}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_PREDEPENDS "${CPACK_DEBIAN_PACKAGE_PREDEPENDS}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_ENHANCES "${CPACK_DEBIAN_PACKAGE_ENHANCES}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_BREAKS "${CPACK_DEBIAN_PACKAGE_BREAKS}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_CONFLICTS "${CPACK_DEBIAN_PACKAGE_CONFLICTS}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_PROVIDES "${CPACK_DEBIAN_PACKAGE_PROVIDES}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_REPLACES "${CPACK_DEBIAN_PACKAGE_REPLACES}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_SHLIBS "${CPACK_DEBIAN_PACKAGE_SHLIBS_LIST}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA "${CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_CONTROL_STRICT_PERMISSION
+      "${CPACK_DEBIAN_PACKAGE_CONTROL_STRICT_PERMISSION}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_PACKAGE_SOURCE
+     "${CPACK_DEBIAN_PACKAGE_SOURCE}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_GENERATE_POSTINST "${CPACK_DEBIAN_GENERATE_POSTINST}" PARENT_SCOPE)
+  set(GEN_CPACK_DEBIAN_GENERATE_POSTRM "${CPACK_DEBIAN_GENERATE_POSTRM}" PARENT_SCOPE)
+  set(GEN_WDIR "${WDIR}" PARENT_SCOPE)
+endfunction()
+
+cpack_deb_prepare_package_vars()
diff --git a/share/cmake-3.6/Modules/CPackIFW.cmake b/share/cmake-3.6/Modules/CPackIFW.cmake
new file mode 100644
index 0000000..083fc28
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackIFW.cmake
@@ -0,0 +1,704 @@
+#.rst:
+# CPackIFW
+# --------
+#
+# .. _QtIFW: http://doc.qt.io/qtinstallerframework/index.html
+#
+# This module looks for the location of the command line utilities supplied
+# with the Qt Installer Framework (QtIFW_).
+#
+# The module also defines several commands to control the behavior of the
+# CPack ``IFW`` generator.
+#
+#
+# Overview
+# ^^^^^^^^
+#
+# CPack ``IFW`` generator helps you to create online and offline
+# binary cross-platform installers with a graphical user interface.
+#
+# CPack IFW generator prepares project installation and generates configuration
+# and meta information for QtIFW_ tools.
+#
+# The QtIFW_ provides a set of tools and utilities to create
+# installers for the supported desktop Qt platforms: Linux, Microsoft Windows,
+# and Mac OS X.
+#
+# You should also install QtIFW_ to use CPack ``IFW`` generator.
+# If you don't use a default path for the installation, please set
+# the used path in the variable ``QTIFWDIR``.
+#
+# Variables
+# ^^^^^^^^^
+#
+# You can use the following variables to change behavior of CPack ``IFW``
+# generator.
+#
+# Debug
+# """"""
+#
+# .. variable:: CPACK_IFW_VERBOSE
+#
+#  Set to ``ON`` to enable addition debug output.
+#  By default is ``OFF``.
+#
+# Package
+# """""""
+#
+# .. variable:: CPACK_IFW_PACKAGE_TITLE
+#
+#  Name of the installer as displayed on the title bar.
+#  By default used :variable:`CPACK_PACKAGE_DESCRIPTION_SUMMARY`.
+#
+# .. variable:: CPACK_IFW_PACKAGE_PUBLISHER
+#
+#  Publisher of the software (as shown in the Windows Control Panel).
+#  By default used :variable:`CPACK_PACKAGE_VENDOR`.
+#
+# .. variable:: CPACK_IFW_PRODUCT_URL
+#
+#  URL to a page that contains product information on your web site.
+#
+# .. variable:: CPACK_IFW_PACKAGE_ICON
+#
+#  Filename for a custom installer icon. The actual file is '.icns' (Mac OS X),
+#  '.ico' (Windows). No functionality on Unix.
+#
+# .. variable:: CPACK_IFW_PACKAGE_WINDOW_ICON
+#
+#  Filename for a custom window icon in PNG format for the Installer
+#  application.
+#
+# .. variable:: CPACK_IFW_PACKAGE_LOGO
+#
+#  Filename for a logo is used as QWizard::LogoPixmap.
+#
+# .. variable:: CPACK_IFW_PACKAGE_START_MENU_DIRECTORY
+#
+#  Name of the default program group for the product in the Windows Start menu.
+#
+#  By default used :variable:`CPACK_IFW_PACKAGE_NAME`.
+#
+# .. variable:: CPACK_IFW_TARGET_DIRECTORY
+#
+#  Default target directory for installation.
+#  By default used
+#  "@ApplicationsDir@/:variable:`CPACK_PACKAGE_INSTALL_DIRECTORY`"
+#
+#  You can use predefined variables.
+#
+# .. variable:: CPACK_IFW_ADMIN_TARGET_DIRECTORY
+#
+#  Default target directory for installation with administrator rights.
+#
+#  You can use predefined variables.
+#
+# .. variable:: CPACK_IFW_PACKAGE_GROUP
+#
+#  The group, which will be used to configure the root package
+#
+# .. variable:: CPACK_IFW_PACKAGE_NAME
+#
+#  The root package name, which will be used if configuration group is not
+#  specified
+#
+# .. variable:: CPACK_IFW_PACKAGE_MAINTENANCE_TOOL_NAME
+#
+#  Filename of the generated maintenance tool.
+#  The platform-specific executable file extension is appended.
+#
+#  By default used QtIFW_ defaults (``maintenancetool``).
+#
+# .. variable:: CPACK_IFW_PACKAGE_MAINTENANCE_TOOL_INI_FILE
+#
+#  Filename for the configuration of the generated maintenance tool.
+#
+#  By default used QtIFW_ defaults (``maintenancetool.ini``).
+#
+# .. variable:: CPACK_IFW_PACKAGE_ALLOW_NON_ASCII_CHARACTERS
+#
+#  Set to ``ON`` if the installation path can contain non-ASCII characters.
+#
+#  Is ``ON`` for QtIFW_ less 2.0 tools.
+#
+# .. variable:: CPACK_IFW_PACKAGE_ALLOW_SPACE_IN_PATH
+#
+#  Set to ``OFF`` if the installation path cannot contain space characters.
+#
+#  Is ``ON`` for QtIFW_ less 2.0 tools.
+#
+# .. variable:: CPACK_IFW_PACKAGE_CONTROL_SCRIPT
+#
+#  Filename for a custom installer control script.
+#
+# .. variable:: CPACK_IFW_REPOSITORIES_ALL
+#
+#  The list of remote repositories.
+#
+#  The default value of this variable is computed by CPack and contains
+#  all repositories added with command :command:`cpack_ifw_add_repository`
+#  or updated with command :command:`cpack_ifw_update_repository`.
+#
+# .. variable:: CPACK_IFW_DOWNLOAD_ALL
+#
+#  If this is ``ON`` all components will be downloaded.
+#  By default is ``OFF`` or used value
+#  from ``CPACK_DOWNLOAD_ALL`` if set
+#
+# Components
+# """"""""""
+#
+# .. variable:: CPACK_IFW_RESOLVE_DUPLICATE_NAMES
+#
+#  Resolve duplicate names when installing components with groups.
+#
+# .. variable:: CPACK_IFW_PACKAGES_DIRECTORIES
+#
+#  Additional prepared packages dirs that will be used to resolve
+#  dependent components.
+#
+# Tools
+# """"""""
+#
+# .. variable:: CPACK_IFW_FRAMEWORK_VERSION
+#
+#  The version of used QtIFW_ tools.
+#
+# .. variable:: CPACK_IFW_BINARYCREATOR_EXECUTABLE
+#
+#  The path to "binarycreator" command line client.
+#
+#  This variable is cached and can be configured user if need.
+#
+# .. variable:: CPACK_IFW_REPOGEN_EXECUTABLE
+#
+#  The path to "repogen" command line client.
+#
+#  This variable is cached and can be configured user if need.
+#
+# Commands
+# ^^^^^^^^^
+#
+# The module defines the following commands:
+#
+# --------------------------------------------------------------------------
+#
+# .. command:: cpack_ifw_configure_component
+#
+# Sets the arguments specific to the CPack IFW generator.
+#
+# ::
+#
+#   cpack_ifw_configure_component(<compname> [COMMON] [ESSENTIAL]
+#                       [NAME <name>]
+#                       [VERSION <version>]
+#                       [SCRIPT <script>]
+#                       [PRIORITY <priority>]
+#                       [DEPENDS <com_id> ...]
+#                       [LICENSES <display_name> <file_path> ...])
+#
+# This command should be called after :command:`cpack_add_component` command.
+#
+# ``COMMON`` if set, then the component will be packaged and installed as part
+# of a group to which it belongs.
+#
+# ``ESSENTIAL`` if set, then the package manager stays disabled until that
+# component is updated.
+#
+# ``NAME`` is used to create domain-like identification for this component.
+# By default used origin component name.
+#
+# ``VERSION`` is version of component.
+# By default used :variable:`CPACK_PACKAGE_VERSION`.
+#
+# ``SCRIPT`` is a relative or absolute path to operations script
+# for this component.
+#
+# ``PRIORITY`` is priority of the component in the tree.
+#
+# ``DEPENDS`` list of dependency component identifiers in QtIFW_ style.
+#
+# ``LICENSES`` pair of <display_name> and <file_path> of license text for this
+# component. You can specify more then one license.
+#
+# --------------------------------------------------------------------------
+#
+# .. command:: cpack_ifw_configure_component_group
+#
+# Sets the arguments specific to the CPack IFW generator.
+#
+# ::
+#
+#   cpack_ifw_configure_component_group(<groupname>
+#                       [NAME <name>]
+#                       [VERSION <version>]
+#                       [SCRIPT <script>]
+#                       [PRIORITY <priority>]
+#                       [LICENSES <display_name> <file_path> ...])
+#
+# This command should be called after :command:`cpack_add_component_group`
+# command.
+#
+# ``NAME`` is used to create domain-like identification for this component
+# group.
+# By default used origin component group name.
+#
+# ``VERSION`` is version of component group.
+# By default used :variable:`CPACK_PACKAGE_VERSION`.
+#
+# ``SCRIPT`` is a relative or absolute path to operations script
+# for this component group.
+#
+# ``PRIORITY`` is priority of the component group in the tree.
+#
+# ``LICENSES`` pair of <display_name> and <file_path> of license text for this
+# component group. You can specify more then one license.
+#
+# --------------------------------------------------------------------------
+#
+# .. command:: cpack_ifw_add_repository
+#
+# Add QtIFW_ specific remote repository to binary installer.
+#
+# ::
+#
+#   cpack_ifw_add_repository(<reponame> [DISABLED]
+#                       URL <url>
+#                       [USERNAME <username>]
+#                       [PASSWORD <password>]
+#                       [DISPLAY_NAME <display_name>])
+#
+# This command will also add the <reponame> repository
+# to a variable :variable:`CPACK_IFW_REPOSITORIES_ALL`.
+#
+# ``DISABLED`` if set, then the repository will be disabled by default.
+#
+# ``URL`` is points to a list of available components.
+#
+# ``USERNAME`` is used as user on a protected repository.
+#
+# ``PASSWORD`` is password to use on a protected repository.
+#
+# ``DISPLAY_NAME`` is string to display instead of the URL.
+#
+#
+# --------------------------------------------------------------------------
+#
+# .. command:: cpack_ifw_update_repository
+#
+# Update QtIFW_ specific repository from remote repository.
+#
+# ::
+#
+#   cpack_ifw_update_repository(<reponame>
+#                       [[ADD|REMOVE] URL <url>]|
+#                        [REPLACE OLD_URL <old_url> NEW_URL <new_url>]]
+#                       [USERNAME <username>]
+#                       [PASSWORD <password>]
+#                       [DISPLAY_NAME <display_name>])
+#
+# This command will also add the <reponame> repository
+# to a variable :variable:`CPACK_IFW_REPOSITORIES_ALL`.
+#
+# ``URL`` is points to a list of available components.
+#
+# ``OLD_URL`` is points to a list that will replaced.
+#
+# ``NEW_URL`` is points to a list that will replace to.
+#
+# ``USERNAME`` is used as user on a protected repository.
+#
+# ``PASSWORD`` is password to use on a protected repository.
+#
+# ``DISPLAY_NAME`` is string to display instead of the URL.
+#
+# Example usage
+# ^^^^^^^^^^^^^
+#
+# .. code-block:: cmake
+#
+#    set(CPACK_PACKAGE_NAME "MyPackage")
+#    set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "MyPackage Installation Example")
+#    set(CPACK_PACKAGE_VERSION "1.0.0") # Version of installer
+#
+#    include(CPack)
+#    include(CPackIFW)
+#
+#    cpack_add_component(myapp
+#        DISPLAY_NAME "MyApp"
+#        DESCRIPTION "My Application")
+#    cpack_ifw_configure_component(myapp
+#        VERSION "1.2.3" # Version of component
+#        SCRIPT "operations.qs")
+#    cpack_add_component(mybigplugin
+#        DISPLAY_NAME "MyBigPlugin"
+#        DESCRIPTION "My Big Downloadable Plugin"
+#        DOWNLOADED)
+#    cpack_ifw_add_repository(myrepo
+#        URL "http://example.com/ifw/repo/myapp"
+#        DISPLAY_NAME "My Application Repository")
+#
+#
+# Online installer
+# ^^^^^^^^^^^^^^^^
+#
+# By default CPack IFW generator makes offline installer. This means that all
+# components will be packaged into a binary file.
+#
+# To make a component downloaded, you must set the ``DOWNLOADED`` option in
+# :command:`cpack_add_component`.
+#
+# Then you would use the command :command:`cpack_configure_downloads`.
+# If you set ``ALL`` option all components will be downloaded.
+#
+# You also can use command :command:`cpack_ifw_add_repository` and
+# variable :variable:`CPACK_IFW_DOWNLOAD_ALL` for more specific configuration.
+#
+# CPack IFW generator creates "repository" dir in current binary dir. You
+# would copy content of this dir to specified ``site`` (``url``).
+#
+# See Also
+# ^^^^^^^^
+#
+# Qt Installer Framework Manual:
+#
+#  Index page
+#   http://doc.qt.io/qtinstallerframework/index.html
+#
+#  Component Scripting
+#   http://doc.qt.io/qtinstallerframework/scripting.html
+#
+#  Predefined Variables
+#   http://doc.qt.io/qtinstallerframework/scripting.html#predefined-variables
+#
+#  Promoting Updates
+#   http://doc.qt.io/qtinstallerframework/ifw-updates.html
+#
+# Download Qt Installer Framework for you platform from Qt site:
+#  http://download.qt.io/official_releases/qt-installer-framework
+#
+
+#=============================================================================
+# Copyright 2014 Kitware, Inc.
+# Copyright 2014 Konstantin Podsvirov <konstantin@podsvirov.pro>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#=============================================================================
+# Search Qt Installer Framework tools
+#=============================================================================
+
+# Default path
+
+set(_CPACK_IFW_PATHS
+  "${QTIFWDIR}"
+  "$ENV{QTIFWDIR}"
+  "${QTDIR}"
+  "$ENV{QTIFWDIR}")
+if(WIN32)
+  list(APPEND _CPACK_IFW_PATHS
+    "$ENV{HOMEDRIVE}/Qt"
+    "C:/Qt")
+else()
+  list(APPEND _CPACK_IFW_PATHS
+    "$ENV{HOME}/Qt"
+    "/opt/Qt")
+endif()
+
+set(_CPACK_IFW_SUFFIXES
+# Common
+  "bin"
+# Second branch
+  "QtIFW2.3.0/bin"
+  "QtIFW2.2.0/bin"
+  "QtIFW2.1.0/bin"
+  "QtIFW2.0.3/bin"
+  "QtIFW2.0.1/bin"
+  "QtIFW2.0.0/bin"
+# First branch
+  "QtIFW-1.6.0/bin"
+  "QtIFW-1.5.0/bin"
+  "QtIFW-1.4.0/bin"
+  "QtIFW-1.3.0/bin")
+
+# Look for 'binarycreator'
+
+find_program(CPACK_IFW_BINARYCREATOR_EXECUTABLE
+  NAMES binarycreator
+  PATHS ${_CPACK_IFW_PATHS}
+  PATH_SUFFIXES ${_CPACK_IFW_SUFFIXES}
+  DOC "QtIFW binarycreator command line client")
+
+mark_as_advanced(CPACK_IFW_BINARYCREATOR_EXECUTABLE)
+
+# Look for 'repogen'
+
+find_program(CPACK_IFW_REPOGEN_EXECUTABLE
+  NAMES repogen
+  PATHS ${_CPACK_IFW_PATHS}
+  PATH_SUFFIXES ${_CPACK_IFW_SUFFIXES}
+  DOC "QtIFW repogen command line client"
+  )
+mark_as_advanced(CPACK_IFW_REPOGEN_EXECUTABLE)
+
+# Look for 'installerbase'
+
+find_program(CPACK_IFW_INSTALLERBASE_EXECUTABLE
+  NAMES installerbase
+  PATHS ${_CPACK_IFW_PATHS}
+  PATH_SUFFIXES ${_CPACK_IFW_SUFFIXES}
+  DOC "QtIFW installer executable base"
+  )
+mark_as_advanced(CPACK_IFW_INSTALLERBASE_EXECUTABLE)
+
+# Look for 'devtool' (appeared in the second branch)
+
+find_program(CPACK_IFW_DEVTOOL_EXECUTABLE
+  NAMES devtool
+  PATHS ${_CPACK_IFW_PATHS}
+  PATH_SUFFIXES ${_CPACK_IFW_SUFFIXES}
+  DOC "QtIFW devtool command line client"
+  )
+mark_as_advanced(CPACK_IFW_DEVTOOL_EXECUTABLE)
+
+#
+## Next code is included only once
+#
+
+if(NOT CPackIFW_CMake_INCLUDED)
+set(CPackIFW_CMake_INCLUDED 1)
+
+#=============================================================================
+# Framework version
+#=============================================================================
+
+if(CPACK_IFW_INSTALLERBASE_EXECUTABLE AND CPACK_IFW_DEVTOOL_EXECUTABLE)
+  execute_process(COMMAND
+    "${CPACK_IFW_INSTALLERBASE_EXECUTABLE}" --framework-version
+    OUTPUT_VARIABLE CPACK_IFW_FRAMEWORK_VERSION)
+  if(CPACK_IFW_FRAMEWORK_VERSION)
+    string(REPLACE " " ""
+      CPACK_IFW_FRAMEWORK_VERSION "${CPACK_IFW_FRAMEWORK_VERSION}")
+    string(REPLACE "\t" ""
+      CPACK_IFW_FRAMEWORK_VERSION "${CPACK_IFW_FRAMEWORK_VERSION}")
+    string(REPLACE "\n" ""
+      CPACK_IFW_FRAMEWORK_VERSION "${CPACK_IFW_FRAMEWORK_VERSION}")
+    if(CPACK_IFW_VERBOSE)
+      message(STATUS "Found QtIFW ${CPACK_IFW_FRAMEWORK_VERSION} version")
+    endif()
+  endif()
+endif()
+
+#=============================================================================
+# Macro definition
+#=============================================================================
+
+# Macro definition based on CPackComponent
+
+if(NOT CPackComponent_CMake_INCLUDED)
+    include(CPackComponent)
+endif()
+
+if(NOT __CMAKE_PARSE_ARGUMENTS_INCLUDED)
+    include(CMakeParseArguments)
+endif()
+
+# Resolve full filename for script file
+macro(_cpack_ifw_resolve_script _variable)
+  set(_ifw_script_macro ${_variable})
+  set(_ifw_script_file ${${_ifw_script_macro}})
+  if(DEFINED ${_ifw_script_macro})
+    get_filename_component(${_ifw_script_macro} ${_ifw_script_file} ABSOLUTE)
+    set(_ifw_script_file ${${_ifw_script_macro}})
+    if(NOT EXISTS ${_ifw_script_file})
+      message(WARNING "CPack IFW: script file \"${_ifw_script_file}\" is not exists")
+      set(${_ifw_script_macro})
+    endif()
+  endif()
+endmacro()
+
+# Resolve full path to lisense file
+macro(_cpack_ifw_resolve_lisenses _variable)
+  if(${_variable})
+    set(_ifw_license_file FALSE)
+    set(_ifw_licenses_fix)
+    foreach(_ifw_licenses_arg ${${_variable}})
+      if(_ifw_license_file)
+        get_filename_component(_ifw_licenses_arg "${_ifw_licenses_arg}" ABSOLUTE)
+        set(_ifw_license_file FALSE)
+      else()
+        set(_ifw_license_file TRUE)
+      endif()
+      list(APPEND _ifw_licenses_fix "${_ifw_licenses_arg}")
+    endforeach(_ifw_licenses_arg)
+    set(${_variable} "${_ifw_licenses_fix}")
+  endif()
+endmacro()
+
+# Macro for configure component
+macro(cpack_ifw_configure_component compname)
+
+  string(TOUPPER ${compname} _CPACK_IFWCOMP_UNAME)
+
+  set(_IFW_OPT COMMON ESSENTIAL)
+  set(_IFW_ARGS NAME VERSION SCRIPT PRIORITY)
+  set(_IFW_MULTI_ARGS DEPENDS LICENSES)
+  cmake_parse_arguments(CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME} "${_IFW_OPT}" "${_IFW_ARGS}" "${_IFW_MULTI_ARGS}" ${ARGN})
+
+  _cpack_ifw_resolve_script(CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_SCRIPT)
+  _cpack_ifw_resolve_lisenses(CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_LICENSES)
+
+  set(_CPACK_IFWCOMP_STR "\n# Configuration for IFW component \"${compname}\"\n")
+
+  foreach(_IFW_ARG_NAME ${_IFW_OPT})
+  cpack_append_option_set_command(
+    CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWCOMP_STR)
+  endforeach()
+
+  foreach(_IFW_ARG_NAME ${_IFW_ARGS})
+  cpack_append_string_variable_set_command(
+    CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWCOMP_STR)
+  endforeach()
+
+  foreach(_IFW_ARG_NAME ${_IFW_MULTI_ARGS})
+  cpack_append_variable_set_command(
+    CPACK_IFW_COMPONENT_${_CPACK_IFWCOMP_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWCOMP_STR)
+  endforeach()
+
+  if(CPack_CMake_INCLUDED)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_IFWCOMP_STR}")
+  endif()
+
+endmacro()
+
+# Macro for configure group
+macro(cpack_ifw_configure_component_group grpname)
+
+  string(TOUPPER ${grpname} _CPACK_IFWGRP_UNAME)
+
+  set(_IFW_OPT)
+  set(_IFW_ARGS NAME VERSION SCRIPT PRIORITY)
+  set(_IFW_MULTI_ARGS LICENSES)
+  cmake_parse_arguments(CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME} "${_IFW_OPT}" "${_IFW_ARGS}" "${_IFW_MULTI_ARGS}" ${ARGN})
+
+  _cpack_ifw_resolve_script(CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_SCRIPT)
+  _cpack_ifw_resolve_lisenses(CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_LICENSES)
+
+  set(_CPACK_IFWGRP_STR "\n# Configuration for IFW component group \"${grpname}\"\n")
+
+  foreach(_IFW_ARG_NAME ${_IFW_ARGS})
+  cpack_append_string_variable_set_command(
+    CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWGRP_STR)
+  endforeach()
+
+  foreach(_IFW_ARG_NAME ${_IFW_MULTI_ARGS})
+  cpack_append_variable_set_command(
+    CPACK_IFW_COMPONENT_GROUP_${_CPACK_IFWGRP_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWGRP_STR)
+  endforeach()
+
+  if(CPack_CMake_INCLUDED)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_IFWGRP_STR}")
+  endif()
+endmacro()
+
+# Macro for adding repository
+macro(cpack_ifw_add_repository reponame)
+
+  string(TOUPPER ${reponame} _CPACK_IFWREPO_UNAME)
+
+  set(_IFW_OPT DISABLED)
+  set(_IFW_ARGS URL USERNAME PASSWORD DISPLAY_NAME)
+  set(_IFW_MULTI_ARGS)
+  cmake_parse_arguments(CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME} "${_IFW_OPT}" "${_IFW_ARGS}" "${_IFW_MULTI_ARGS}" ${ARGN})
+
+  set(_CPACK_IFWREPO_STR "\n# Configuration for IFW repository \"${reponame}\"\n")
+
+  foreach(_IFW_ARG_NAME ${_IFW_OPT})
+  cpack_append_option_set_command(
+    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWREPO_STR)
+  endforeach()
+
+  foreach(_IFW_ARG_NAME ${_IFW_ARGS})
+  cpack_append_string_variable_set_command(
+    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWREPO_STR)
+  endforeach()
+
+  foreach(_IFW_ARG_NAME ${_IFW_MULTI_ARGS})
+  cpack_append_variable_set_command(
+    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWREPO_STR)
+  endforeach()
+
+  list(APPEND CPACK_IFW_REPOSITORIES_ALL ${reponame})
+  set(_CPACK_IFWREPO_STR "${_CPACK_IFWREPO_STR}list(APPEND CPACK_IFW_REPOSITORIES_ALL ${reponame})\n")
+
+  if(CPack_CMake_INCLUDED)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_IFWREPO_STR}")
+  endif()
+
+endmacro()
+
+# Macro for updating repository
+macro(cpack_ifw_update_repository reponame)
+
+  string(TOUPPER ${reponame} _CPACK_IFWREPO_UNAME)
+
+  set(_IFW_OPT ADD REMOVE REPLACE DISABLED)
+  set(_IFW_ARGS URL OLD_URL NEW_URL USERNAME PASSWORD DISPLAY_NAME)
+  set(_IFW_MULTI_ARGS)
+  cmake_parse_arguments(CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME} "${_IFW_OPT}" "${_IFW_ARGS}" "${_IFW_MULTI_ARGS}" ${ARGN})
+
+  set(_CPACK_IFWREPO_STR "\n# Configuration for IFW repository \"${reponame}\" update\n")
+
+  foreach(_IFW_ARG_NAME ${_IFW_OPT})
+  cpack_append_option_set_command(
+    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWREPO_STR)
+  endforeach()
+
+  foreach(_IFW_ARG_NAME ${_IFW_ARGS})
+  cpack_append_string_variable_set_command(
+    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWREPO_STR)
+  endforeach()
+
+  foreach(_IFW_ARG_NAME ${_IFW_MULTI_ARGS})
+  cpack_append_variable_set_command(
+    CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_${_IFW_ARG_NAME}
+    _CPACK_IFWREPO_STR)
+  endforeach()
+
+  if(CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_ADD
+    OR CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_REMOVE
+    OR CPACK_IFW_REPOSITORY_${_CPACK_IFWREPO_UNAME}_REPLACE)
+    list(APPEND CPACK_IFW_REPOSITORIES_ALL ${reponame})
+    set(_CPACK_IFWREPO_STR "${_CPACK_IFWREPO_STR}list(APPEND CPACK_IFW_REPOSITORIES_ALL ${reponame})\n")
+  else()
+    set(_CPACK_IFWREPO_STR)
+  endif()
+
+  if(CPack_CMake_INCLUDED AND _CPACK_IFWREPO_STR)
+    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${_CPACK_IFWREPO_STR}")
+  endif()
+
+endmacro()
+
+# Resolve package control script
+_cpack_ifw_resolve_script(CPACK_IFW_PACKAGE_CONTROL_SCRIPT)
+
+endif() # NOT CPackIFW_CMake_INCLUDED
diff --git a/share/cmake-3.6/Modules/CPackNSIS.cmake b/share/cmake-3.6/Modules/CPackNSIS.cmake
new file mode 100644
index 0000000..db5984a
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackNSIS.cmake
@@ -0,0 +1,143 @@
+#.rst:
+# CPackNSIS
+# ---------
+#
+# CPack NSIS generator specific options
+#
+# Variables specific to CPack NSIS generator
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# The following variables are specific to the graphical installers built
+# on Windows using the Nullsoft Installation System.
+#
+# .. variable:: CPACK_NSIS_INSTALL_ROOT
+#
+#  The default installation directory presented to the end user by the NSIS
+#  installer is under this root dir. The full directory presented to the end
+#  user is: ${CPACK_NSIS_INSTALL_ROOT}/${CPACK_PACKAGE_INSTALL_DIRECTORY}
+#
+# .. variable:: CPACK_NSIS_MUI_ICON
+#
+#  An icon filename.  The name of a ``*.ico`` file used as the main icon for the
+#  generated install program.
+#
+# .. variable:: CPACK_NSIS_MUI_UNIICON
+#
+#  An icon filename.  The name of a ``*.ico`` file used as the main icon for the
+#  generated uninstall program.
+#
+# .. variable:: CPACK_NSIS_INSTALLER_MUI_ICON_CODE
+#
+#  undocumented.
+#
+# .. variable:: CPACK_NSIS_MUI_WELCOMEFINISHPAGE_BITMAP
+#
+#  The filename of a bitmap to use as the NSIS MUI_WELCOMEFINISHPAGE_BITMAP.
+#
+# .. variable:: CPACK_NSIS_MUI_UNWELCOMEFINISHPAGE_BITMAP
+#
+#  The filename of a bitmap to use as the NSIS MUI_UNWELCOMEFINISHPAGE_BITMAP.
+#
+# .. variable:: CPACK_NSIS_EXTRA_PREINSTALL_COMMANDS
+#
+#  Extra NSIS commands that will be added to the beginning of the install
+#  Section, before your install tree is available on the target system.
+#
+# .. variable:: CPACK_NSIS_EXTRA_INSTALL_COMMANDS
+#
+#  Extra NSIS commands that will be added to the end of the install Section,
+#  after your install tree is available on the target system.
+#
+# .. variable:: CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS
+#
+#  Extra NSIS commands that will be added to the uninstall Section, before
+#  your install tree is removed from the target system.
+#
+# .. variable:: CPACK_NSIS_COMPRESSOR
+#
+#  The arguments that will be passed to the NSIS SetCompressor command.
+#
+# .. variable:: CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL
+#
+#  Ask about uninstalling previous versions first.  If this is set to "ON",
+#  then an installer will look for previous installed versions and if one is
+#  found, ask the user whether to uninstall it before proceeding with the
+#  install.
+#
+# .. variable:: CPACK_NSIS_MODIFY_PATH
+#
+#  Modify PATH toggle.  If this is set to "ON", then an extra page will appear
+#  in the installer that will allow the user to choose whether the program
+#  directory should be added to the system PATH variable.
+#
+# .. variable:: CPACK_NSIS_DISPLAY_NAME
+#
+#  The display name string that appears in the Windows Add/Remove Program
+#  control panel
+#
+# .. variable:: CPACK_NSIS_PACKAGE_NAME
+#
+#  The title displayed at the top of the installer.
+#
+# .. variable:: CPACK_NSIS_INSTALLED_ICON_NAME
+#
+#  A path to the executable that contains the installer icon.
+#
+# .. variable:: CPACK_NSIS_HELP_LINK
+#
+#  URL to a web site providing assistance in installing your application.
+#
+# .. variable:: CPACK_NSIS_URL_INFO_ABOUT
+#
+#  URL to a web site providing more information about your application.
+#
+# .. variable:: CPACK_NSIS_CONTACT
+#
+#  Contact information for questions and comments about the installation
+#  process.
+#
+# .. variable:: CPACK_NSIS_CREATE_ICONS_EXTRA
+#
+#  Additional NSIS commands for creating start menu shortcuts.
+#
+# .. variable:: CPACK_NSIS_DELETE_ICONS_EXTRA
+#
+#  Additional NSIS commands to uninstall start menu shortcuts.
+#
+# .. variable:: CPACK_NSIS_EXECUTABLES_DIRECTORY
+#
+#  Creating NSIS start menu links assumes that they are in 'bin' unless this
+#  variable is set.  For example, you would set this to 'exec' if your
+#  executables are in an exec directory.
+#
+# .. variable:: CPACK_NSIS_MUI_FINISHPAGE_RUN
+#
+#  Specify an executable to add an option to run on the finish page of the
+#  NSIS installer.
+#
+# .. variable:: CPACK_NSIS_MENU_LINKS
+#
+#  Specify links in [application] menu.  This should contain a list of pair
+#  "link" "link name". The link may be an URL or a path relative to
+#  installation prefix.  Like::
+#
+#   set(CPACK_NSIS_MENU_LINKS
+#       "doc/cmake-@CMake_VERSION_MAJOR@.@CMake_VERSION_MINOR@/cmake.html"
+#       "CMake Help" "https://cmake.org" "CMake Web Site")
+#
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#FIXME we should put NSIS specific code here
+#FIXME but I'm not doing it because I'm not able to test it...
diff --git a/share/cmake-3.2/Modules/CPackPackageMaker.cmake b/share/cmake-3.6/Modules/CPackPackageMaker.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CPackPackageMaker.cmake
rename to share/cmake-3.6/Modules/CPackPackageMaker.cmake
diff --git a/share/cmake-3.6/Modules/CPackRPM.cmake b/share/cmake-3.6/Modules/CPackRPM.cmake
new file mode 100644
index 0000000..d231ff0
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackRPM.cmake
@@ -0,0 +1,1975 @@
+#.rst:
+# CPackRPM
+# --------
+#
+# The built in (binary) CPack RPM generator (Unix only)
+#
+# Variables specific to CPack RPM generator
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# CPackRPM may be used to create RPM packages using :module:`CPack`.
+# CPackRPM is a :module:`CPack` generator thus it uses the ``CPACK_XXX``
+# variables used by :module:`CPack`.
+#
+# CPackRPM has specific features which are controlled by the specifics
+# :code:`CPACK_RPM_XXX` variables.
+#
+# :code:`CPACK_RPM_<COMPONENT>_XXXX` variables may be used in order to have
+# **component** specific values.  Note however that ``<COMPONENT>`` refers to the
+# **grouping name** written in upper case. It may be either a component name or
+# a component GROUP name. Usually those variables correspond to RPM spec file
+# entities. One may find information about spec files here
+# http://www.rpm.org/wiki/Docs
+#
+# .. note::
+#
+#  `<COMPONENT>` part of variables is preferred to be in upper case (for e.g. if
+#  component is named `foo` then use `CPACK_RPM_FOO_XXXX` variable name format)
+#  as is with other `CPACK_<COMPONENT>_XXXX` variables.
+#  For the purposes of back compatibility (CMake/CPack version 3.5 and lower)
+#  support for same cased component (e.g. `fOo` would be used as
+#  `CPACK_RPM_fOo_XXXX`) is still supported for variables defined in older
+#  versions of CMake/CPack but is not guaranteed for variables that
+#  will be added in the future. For the sake of back compatibility same cased
+#  component variables also override upper cased versions where both are
+#  present.
+#
+# Here are some CPackRPM wiki resources that are here for historic reasons and
+# are no longer maintained but may still prove useful:
+#
+#  - https://cmake.org/Wiki/CMake:CPackConfiguration
+#  - https://cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29
+#
+# List of CPackRPM specific variables:
+#
+# .. variable:: CPACK_RPM_PACKAGE_COMPONENT
+#
+#  Enable component packaging for CPackRPM
+#
+#  * Mandatory : NO
+#  * Default   : OFF
+#
+#  If enabled (ON) multiple packages are generated. By default a single package
+#  containing files of all components is generated.
+#
+# .. variable:: CPACK_RPM_PACKAGE_SUMMARY
+#               CPACK_RPM_<component>_PACKAGE_SUMMARY
+#
+#  The RPM package summary.
+#
+#  * Mandatory : YES
+#  * Default   : :variable:`CPACK_PACKAGE_DESCRIPTION_SUMMARY`
+#
+# .. variable:: CPACK_RPM_PACKAGE_NAME
+#               CPACK_RPM_<component>_PACKAGE_NAME
+#
+#  The RPM package name.
+#
+#  * Mandatory : YES
+#  * Default   : :variable:`CPACK_PACKAGE_NAME`
+#
+# .. variable:: CPACK_RPM_FILE_NAME
+#               CPACK_RPM_<component>_FILE_NAME
+#
+#  Package file name.
+#
+#  * Mandatory : YES
+#  * Default   : ``<CPACK_PACKAGE_FILE_NAME>[-<component>].rpm`` with spaces
+#                replaced by '-'
+#
+#  This may be set to ``RPM-DEFAULT`` to allow rpmbuild tool to generate package
+#  file name by itself.
+#  Alternatively provided package file name must end with ``.rpm`` suffix.
+#
+#  .. note::
+#
+#    By using user provided spec file, rpm macro extensions such as for
+#    generating debuginfo packages or by simply using multiple components more
+#    than one rpm file may be generated, either from a single spec file or from
+#    multiple spec files (each component execution produces it's own spec file).
+#    In such cases duplicate file names may occur as a result of this variable
+#    setting or spec file content structure. Duplicate files get overwritten
+#    and it is up to the packager to set the variables in a manner that will
+#    prevent such errors.
+#
+# .. variable:: CPACK_RPM_PACKAGE_VERSION
+#
+#  The RPM package version.
+#
+#  * Mandatory : YES
+#  * Default   : :variable:`CPACK_PACKAGE_VERSION`
+#
+# .. variable:: CPACK_RPM_PACKAGE_ARCHITECTURE
+#               CPACK_RPM_<component>_PACKAGE_ARCHITECTURE
+#
+#  The RPM package architecture.
+#
+#  * Mandatory : YES
+#  * Default   : Native architecture output by ``uname -m``
+#
+#  This may be set to ``noarch`` if you know you are building a noarch package.
+#
+# .. variable:: CPACK_RPM_PACKAGE_RELEASE
+#
+#  The RPM package release.
+#
+#  * Mandatory : YES
+#  * Default   : 1
+#
+#  This is the numbering of the RPM package itself, i.e. the version of the
+#  packaging and not the version of the content (see
+#  :variable:`CPACK_RPM_PACKAGE_VERSION`). One may change the default value if
+#  the previous packaging was buggy and/or you want to put here a fancy Linux
+#  distro specific numbering.
+#
+# .. note::
+#
+#  This is the string that goes into the RPM ``Release:`` field. Some distros
+#  (e.g. Fedora, CentOS) require ``1%{?dist}`` format and not just a number.
+#  ``%{?dist}`` part can be added by setting :variable:`CPACK_RPM_PACKAGE_RELEASE_DIST`.
+#
+# .. variable:: CPACK_RPM_PACKAGE_RELEASE_DIST
+#
+#  The dist tag that is added  RPM ``Release:`` field.
+#
+#  * Mandatory : NO
+#  * Default   : OFF
+#
+#  This is the reported ``%{dist}`` tag from the current distribution or empty
+#  ``%{dist}`` if RPM macro is not set. If this variable is set then RPM
+#  ``Release:`` field value is set to ``${CPACK_RPM_PACKAGE_RELEASE}%{?dist}``.
+#
+# .. variable:: CPACK_RPM_PACKAGE_LICENSE
+#
+#  The RPM package license policy.
+#
+#  * Mandatory : YES
+#  * Default   : "unknown"
+#
+# .. variable:: CPACK_RPM_PACKAGE_GROUP
+#               CPACK_RPM_<component>_PACKAGE_GROUP
+#
+#  The RPM package group.
+#
+#  * Mandatory : YES
+#  * Default   : "unknown"
+#
+# .. variable:: CPACK_RPM_PACKAGE_VENDOR
+#
+#  The RPM package vendor.
+#
+#  * Mandatory : YES
+#  * Default   : CPACK_PACKAGE_VENDOR if set or "unknown"
+#
+# .. variable:: CPACK_RPM_PACKAGE_URL
+#               CPACK_RPM_<component>_PACKAGE_URL
+#
+#  The projects URL.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+# .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION
+#               CPACK_RPM_<component>_PACKAGE_DESCRIPTION
+#
+#  RPM package description.
+#
+#  * Mandatory : YES
+#  * Default : :variable:`CPACK_COMPONENT_<compName>_DESCRIPTION` (component
+#    based installers only) if set, :variable:`CPACK_PACKAGE_DESCRIPTION_FILE`
+#    if set or "no package description available"
+#
+# .. variable:: CPACK_RPM_COMPRESSION_TYPE
+#
+#  RPM compression type.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to override RPM compression type to be used to build the
+#  RPM. For example some Linux distribution now default to lzma or xz
+#  compression whereas older cannot use such RPM. Using this one can enforce
+#  compression type to be used.
+#
+#  Possible values are:
+#
+#  - lzma
+#  - xz
+#  - bzip2
+#  - gzip
+#
+# .. variable:: CPACK_RPM_PACKAGE_AUTOREQ
+#               CPACK_RPM_<component>_PACKAGE_AUTOREQ
+#
+#  RPM spec autoreq field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to enable (1, yes) or disable (0, no) automatic shared libraries
+#  dependency detection. Dependencies are added to requires list.
+#
+#  .. note::
+#
+#    By default automatic dependency detection is enabled by rpm generator.
+#
+# .. variable:: CPACK_RPM_PACKAGE_AUTOPROV
+#               CPACK_RPM_<component>_PACKAGE_AUTOPROV
+#
+#  RPM spec autoprov field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to enable (1, yes) or disable (0, no) automatic listing of shared
+#  libraries that are provided by the package. Shared libraries are added to
+#  provides list.
+#
+#  .. note::
+#
+#    By default automatic provides detection is enabled by rpm generator.
+#
+# .. variable:: CPACK_RPM_PACKAGE_AUTOREQPROV
+#               CPACK_RPM_<component>_PACKAGE_AUTOREQPROV
+#
+#  RPM spec autoreqprov field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  Variable enables/disables autoreq and autoprov at the same time.
+#  See :variable:`CPACK_RPM_PACKAGE_AUTOREQ` and :variable:`CPACK_RPM_PACKAGE_AUTOPROV`
+#  for more details.
+#
+#  .. note::
+#
+#    By default automatic detection feature is enabled by rpm.
+#
+# .. variable:: CPACK_RPM_PACKAGE_REQUIRES
+#               CPACK_RPM_<component>_PACKAGE_REQUIRES
+#
+#  RPM spec requires field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set RPM dependencies (requires). Note that you must enclose
+#  the complete requires string between quotes, for example::
+#
+#   set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8")
+#
+#  The required package list of an RPM file could be printed with::
+#
+#   rpm -qp --requires file.rpm
+#
+# .. variable:: CPACK_RPM_PACKAGE_CONFLICTS
+#               CPACK_RPM_<component>_PACKAGE_CONFLICTS
+#
+#  RPM spec conflicts field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set negative RPM dependencies (conflicts). Note that you must
+#  enclose the complete requires string between quotes, for example::
+#
+#   set(CPACK_RPM_PACKAGE_CONFLICTS "libxml2")
+#
+#  The conflicting package list of an RPM file could be printed with::
+#
+#   rpm -qp --conflicts file.rpm
+#
+# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE
+#               CPACK_RPM_<component>_PACKAGE_REQUIRES_PRE
+#
+#  RPM spec requires(pre) field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set RPM preinstall dependencies (requires(pre)). Note that
+#  you must enclose the complete requires string between quotes, for example::
+#
+#   set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts")
+#
+# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST
+#               CPACK_RPM_<component>_PACKAGE_REQUIRES_POST
+#
+#  RPM spec requires(post) field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set RPM postinstall dependencies (requires(post)). Note that
+#  you must enclose the complete requires string between quotes, for example::
+#
+#   set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts")
+#
+# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN
+#               CPACK_RPM_<component>_PACKAGE_REQUIRES_POSTUN
+#
+#  RPM spec requires(postun) field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set RPM postuninstall dependencies (requires(postun)). Note
+#  that you must enclose the complete requires string between quotes, for
+#  example::
+#
+#   set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts")
+#
+# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN
+#               CPACK_RPM_<component>_PACKAGE_REQUIRES_PREUN
+#
+#  RPM spec requires(preun) field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set RPM preuninstall dependencies (requires(preun)). Note that
+#  you must enclose the complete requires string between quotes, for example::
+#
+#   set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts")
+#
+# .. variable:: CPACK_RPM_PACKAGE_SUGGESTS
+#               CPACK_RPM_<component>_PACKAGE_SUGGESTS
+#
+#  RPM spec suggest field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set weak RPM dependencies (suggests). Note that you must
+#  enclose the complete requires string between quotes.
+#
+# .. variable:: CPACK_RPM_PACKAGE_PROVIDES
+#               CPACK_RPM_<component>_PACKAGE_PROVIDES
+#
+#  RPM spec provides field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set RPM dependencies (provides). The provided package list
+#  of an RPM file could be printed with::
+#
+#   rpm -qp --provides file.rpm
+#
+# .. variable:: CPACK_RPM_PACKAGE_OBSOLETES
+#               CPACK_RPM_<component>_PACKAGE_OBSOLETES
+#
+#  RPM spec obsoletes field.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set RPM packages that are obsoleted by this one.
+#
+# .. variable:: CPACK_RPM_PACKAGE_RELOCATABLE
+#
+#  build a relocatable RPM.
+#
+#  * Mandatory : NO
+#  * Default   : CPACK_PACKAGE_RELOCATABLE
+#
+#  If this variable is set to TRUE or ON CPackRPM will try
+#  to build a relocatable RPM package. A relocatable RPM may
+#  be installed using::
+#
+#   rpm --prefix or --relocate
+#
+#  in order to install it at an alternate place see rpm(8). Note that
+#  currently this may fail if :variable:`CPACK_SET_DESTDIR` is set to ``ON``. If
+#  :variable:`CPACK_SET_DESTDIR` is set then you will get a warning message but
+#  if there is file installed with absolute path you'll get unexpected behavior.
+#
+# .. variable:: CPACK_RPM_SPEC_INSTALL_POST
+#
+#  Deprecated - use :variable:`CPACK_RPM_POST_INSTALL_SCRIPT_FILE` instead.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#  * Deprecated: YES
+#
+#  This way of specifying post-install script is deprecated, use
+#  :variable:`CPACK_RPM_POST_INSTALL_SCRIPT_FILE`.
+#  May be used to set an RPM post-install command inside the spec file.
+#  For example setting it to ``/bin/true`` may be used to prevent
+#  rpmbuild to strip binaries.
+#
+# .. variable:: CPACK_RPM_SPEC_MORE_DEFINE
+#
+#  RPM extended spec definitions lines.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to add any ``%define`` lines to the generated spec file.
+#
+# .. variable:: CPACK_RPM_PACKAGE_DEBUG
+#
+#  Toggle CPackRPM debug output.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be set when invoking cpack in order to trace debug information
+#  during CPack RPM run. For example you may launch CPack like this::
+#
+#   cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM
+#
+# .. variable:: CPACK_RPM_USER_BINARY_SPECFILE
+#               CPACK_RPM_<componentName>_USER_BINARY_SPECFILE
+#
+#  A user provided spec file.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be set by the user in order to specify a USER binary spec file
+#  to be used by CPackRPM instead of generating the file.
+#  The specified file will be processed by configure_file( @ONLY).
+#
+# .. variable:: CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
+#
+#  Spec file template.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  If set CPack will generate a template for USER specified binary
+#  spec file and stop with an error. For example launch CPack like this::
+#
+#   cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM
+#
+#  The user may then use this file in order to hand-craft is own
+#  binary spec file which may be used with
+#  :variable:`CPACK_RPM_USER_BINARY_SPECFILE`.
+#
+# .. variable:: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
+#               CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
+#
+#  Path to file containing pre (un)install script.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to embed a pre (un)installation script in the spec file.
+#  The referred script file (or both) will be read and directly
+#  put after the ``%pre`` or ``%preun`` section
+#  If :variable:`CPACK_RPM_PACKAGE_COMPONENT` is set to ON the (un)install
+#  script for each component can be overridden with
+#  ``CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE`` and
+#  ``CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE``.
+#  One may verify which scriptlet has been included with::
+#
+#   rpm -qp --scripts  package.rpm
+#
+# .. variable:: CPACK_RPM_POST_INSTALL_SCRIPT_FILE
+#               CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
+#
+#  Path to file containing post (un)install script.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to embed a post (un)installation script in the spec file.
+#  The referred script file (or both) will be read and directly
+#  put after the ``%post`` or ``%postun`` section.
+#  If :variable:`CPACK_RPM_PACKAGE_COMPONENT` is set to ON the (un)install
+#  script for each component can be overridden with
+#  ``CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE`` and
+#  ``CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE``.
+#  One may verify which scriptlet has been included with::
+#
+#   rpm -qp --scripts  package.rpm
+#
+# .. variable:: CPACK_RPM_USER_FILELIST
+#               CPACK_RPM_<COMPONENT>_USER_FILELIST
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to explicitly specify ``%(<directive>)`` file line
+#  in the spec file. Like ``%config(noreplace)`` or any other directive
+#  that be found in the ``%files`` section. Since CPackRPM is generating
+#  the list of files (and directories) the user specified files of
+#  the ``CPACK_RPM_<COMPONENT>_USER_FILELIST`` list will be removed from
+#  the generated list.
+#
+# .. variable:: CPACK_RPM_CHANGELOG_FILE
+#
+#  RPM changelog file.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to embed a changelog in the spec file.
+#  The referred file will be read and directly put after the ``%changelog``
+#  section.
+#
+# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST
+#
+#  list of path to be excluded.
+#
+#  * Mandatory : NO
+#  * Default   : /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include
+#
+#  May be used to exclude path (directories or files) from the auto-generated
+#  list of paths discovered by CPack RPM. The defaut value contains a
+#  reasonable set of values if the variable is not defined by the user. If the
+#  variable is defined by the user then CPackRPM will NOT any of the default
+#  path. If you want to add some path to the default list then you can use
+#  :variable:`CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION` variable.
+#
+# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION
+#
+#  additional list of path to be excluded.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to add more exclude path (directories or files) from the initial
+#  default list of excluded paths. See
+#  :variable:`CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST`.
+#
+# .. variable:: CPACK_RPM_RELOCATION_PATHS
+#
+#  Packages relocation paths list.
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to specify more than one relocation path per relocatable RPM.
+#  Variable contains a list of relocation paths that if relative are prefixed
+#  by the value of :variable:`CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX` or by the
+#  value of :variable:`CPACK_PACKAGING_INSTALL_PREFIX` if the component version
+#  is not provided.
+#  Variable is not component based as its content can be used to set a different
+#  path prefix for e.g. binary dir and documentation dir at the same time.
+#  Only prefixes that are required by a certain component are added to that
+#  component - component must contain at least one file/directory/symbolic link
+#  with :variable:`CPACK_RPM_RELOCATION_PATHS` prefix for a certain relocation
+#  path to be added. Package will not contain any relocation paths if there are
+#  no files/directories/symbolic links on any of the provided prefix locations.
+#  Packages that either do not contain any relocation paths or contain
+#  files/directories/symbolic links that are outside relocation paths print
+#  out an ``AUTHOR_WARNING`` that RPM will be partially relocatable.
+#
+# .. variable:: CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX
+#
+#  Per component relocation path install prefix.
+#
+#  * Mandatory : NO
+#  * Default   : CPACK_PACKAGING_INSTALL_PREFIX
+#
+#  May be used to set per component :variable:`CPACK_PACKAGING_INSTALL_PREFIX`
+#  for relocatable RPM packages.
+#
+# .. variable:: CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION
+#               CPACK_RPM_NO_<COMPONENT>_INSTALL_PREFIX_RELOCATION
+#
+#  Removal of default install prefix from relocation paths list.
+#
+#  * Mandatory : NO
+#  * Default   : CPACK_PACKAGING_INSTALL_PREFIX or CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX
+#                are treated as one of relocation paths
+#
+#  May be used to remove CPACK_PACKAGING_INSTALL_PREFIX and CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX
+#  from relocatable RPM prefix paths.
+#
+# .. variable:: CPACK_RPM_ADDITIONAL_MAN_DIRS
+#
+#  * Mandatory : NO
+#  * Default   : -
+#
+#  May be used to set additional man dirs that could potentially be compressed
+#  by brp-compress RPM macro. Variable content must be a list of regular
+#  expressions that point to directories containing man files or to man files
+#  directly. Note that in order to compress man pages a path must also be
+#  present in brp-compress RPM script and that brp-compress script must be
+#  added to RPM configuration by the operating system.
+#
+#  Regular expressions that are added by default were taken from brp-compress
+#  RPM macro:
+#
+#  - /usr/man/man.*
+#  - /usr/man/.*/man.*
+#  - /usr/info.*
+#  - /usr/share/man/man.*
+#  - /usr/share/man/.*/man.*
+#  - /usr/share/info.*
+#  - /usr/kerberos/man.*
+#  - /usr/X11R6/man/man.*
+#  - /usr/lib/perl5/man/man.*
+#  - /usr/share/doc/.*/man/man.*
+#  - /usr/lib/.*/man/man.*
+#
+# .. variable:: CPACK_RPM_DEFAULT_USER
+#               CPACK_RPM_<compName>_DEFAULT_USER
+#
+#  default user ownership of RPM content
+#
+#  * Mandatory : NO
+#  * Default   : root
+#
+#  Value should be user name and not UID.
+#  Note that <compName> must be in upper-case.
+#
+# .. variable:: CPACK_RPM_DEFAULT_GROUP
+#               CPACK_RPM_<compName>_DEFAULT_GROUP
+#
+#  default group ownership of RPM content
+#
+#  * Mandatory : NO
+#  * Default   : root
+#
+#  Value should be group name and not GID.
+#  Note that <compName> must be in upper-case.
+#
+# .. variable:: CPACK_RPM_DEFAULT_FILE_PERMISSIONS
+#               CPACK_RPM_<compName>_DEFAULT_FILE_PERMISSIONS
+#
+#  default permissions used for packaged files
+#
+#  * Mandatory : NO
+#  * Default   : - (system default)
+#
+#  Accepted values are lists with ``PERMISSIONS``. Valid permissions
+#  are:
+#
+#  - OWNER_READ
+#  - OWNER_WRITE
+#  - OWNER_EXECUTE
+#  - GROUP_READ
+#  - GROUP_WRITE
+#  - GROUP_EXECUTE
+#  - WORLD_READ
+#  - WORLD_WRITE
+#  - WORLD_EXECUTE
+#
+#  Note that <compName> must be in upper-case.
+#
+# .. variable:: CPACK_RPM_DEFAULT_DIR_PERMISSIONS
+#               CPACK_RPM_<compName>_DEFAULT_DIR_PERMISSIONS
+#
+#  default permissions used for packaged directories
+#
+#  * Mandatory : NO
+#  * Default   : - (system default)
+#
+#  Accepted values are lists with PERMISSIONS. Valid permissions
+#  are the same as for :variable:`CPACK_RPM_DEFAULT_FILE_PERMISSIONS`.
+#  Note that <compName> must be in upper-case.
+#
+# Packaging of Symbolic Links
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# CPackRPM supports packaging of symbolic links::
+#
+#   execute_process(COMMAND ${CMAKE_COMMAND}
+#     -E create_symlink <relative_path_location> <symlink_name>)
+#   install(FILES ${CMAKE_CURRENT_BINARY_DIR}/<symlink_name>
+#     DESTINATION <symlink_location> COMPONENT libraries)
+#
+# Symbolic links will be optimized (paths will be shortened if possible)
+# before being added to the package or if multiple relocation paths are
+# detected, a post install symlink relocation script will be generated.
+#
+# Symbolic links may point to locations that are not packaged by the same
+# package (either a different component or even not packaged at all) but
+# those locations will be treated as if they were a part of the package
+# while determining if symlink should be either created or present in a
+# post install script - depending on relocation paths.
+#
+# Symbolic links that point to locations outside packaging path produce a
+# warning and are treated as non relocatable permanent symbolic links.
+#
+# Currently there are a few limitations though:
+#
+# * For component based packaging component interdependency is not checked
+#   when processing symbolic links. Symbolic links pointing to content of
+#   a different component are treated the same way as if pointing to location
+#   that will not be packaged.
+#
+# * Symbolic links pointing to a location through one or more intermediate
+#   symbolic links will not be handled differently - if the intermediate
+#   symbolic link(s) is also on a relocatable path, relocating it during
+#   package installation may cause initial symbolic link to point to an
+#   invalid location.
+
+#=============================================================================
+# Copyright 2007-2016 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Author: Eric Noulard with the help of Alexander Neundorf.
+
+function(get_unix_permissions_octal_notation PERMISSIONS_VAR RETURN_VAR)
+  set(PERMISSIONS ${${PERMISSIONS_VAR}})
+  list(LENGTH PERMISSIONS PERM_LEN_PRE)
+  list(REMOVE_DUPLICATES PERMISSIONS)
+  list(LENGTH PERMISSIONS PERM_LEN_POST)
+
+  if(NOT ${PERM_LEN_PRE} EQUAL ${PERM_LEN_POST})
+    message(FATAL_ERROR "${PERMISSIONS_VAR} contains duplicate values.")
+  endif()
+
+  foreach(PERMISSION_TYPE "OWNER" "GROUP" "WORLD")
+    set(${PERMISSION_TYPE}_PERMISSIONS 0)
+
+    foreach(PERMISSION ${PERMISSIONS})
+      if("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_READ")
+        math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 4")
+      elseif("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_WRITE")
+        math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 2")
+      elseif("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_EXECUTE")
+        math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 1")
+      elseif(PERMISSION MATCHES "${PERMISSION_TYPE}.*")
+        message(FATAL_ERROR "${PERMISSIONS_VAR} contains invalid values.")
+      endif()
+    endforeach()
+  endforeach()
+
+  set(${RETURN_VAR} "${OWNER_PERMISSIONS}${GROUP_PERMISSIONS}${WORLD_PERMISSIONS}" PARENT_SCOPE)
+endfunction()
+
+function(cpack_rpm_prepare_relocation_paths)
+  # set appropriate prefix, remove possible trailing slash and convert backslashes to slashes
+  if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX)
+    file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX}" PATH_PREFIX)
+  elseif(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_PREFIX)
+    file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_PREFIX}" PATH_PREFIX)
+  else()
+    file(TO_CMAKE_PATH "${CPACK_PACKAGING_INSTALL_PREFIX}" PATH_PREFIX)
+  endif()
+
+  set(RPM_RELOCATION_PATHS "${CPACK_RPM_RELOCATION_PATHS}")
+  list(REMOVE_DUPLICATES RPM_RELOCATION_PATHS)
+
+  # set base path prefix
+  if(EXISTS "${WDIR}/${PATH_PREFIX}")
+    if(NOT CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION AND
+       NOT CPACK_RPM_NO_${CPACK_RPM_PACKAGE_COMPONENT}_INSTALL_PREFIX_RELOCATION AND
+       NOT CPACK_RPM_NO_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_INSTALL_PREFIX_RELOCATION)
+      set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PATH_PREFIX}\n")
+      list(APPEND RPM_USED_PACKAGE_PREFIXES "${PATH_PREFIX}")
+
+      if(CPACK_RPM_PACKAGE_DEBUG)
+        message("CPackRPM:Debug: removing '${PATH_PREFIX}' from relocation paths")
+      endif()
+    endif()
+  endif()
+
+  # set other path prefixes
+  foreach(RELOCATION_PATH ${RPM_RELOCATION_PATHS})
+    if(IS_ABSOLUTE "${RELOCATION_PATH}")
+      set(PREPARED_RELOCATION_PATH "${RELOCATION_PATH}")
+    else()
+      set(PREPARED_RELOCATION_PATH "${PATH_PREFIX}/${RELOCATION_PATH}")
+    endif()
+
+    if(EXISTS "${WDIR}/${PREPARED_RELOCATION_PATH}")
+      set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}Prefix: ${PREPARED_RELOCATION_PATH}\n")
+      list(APPEND RPM_USED_PACKAGE_PREFIXES "${PREPARED_RELOCATION_PATH}")
+    endif()
+  endforeach()
+
+  # warn about all the paths that are not relocatable
+  cmake_policy(PUSH)
+    # Tell file(GLOB_RECURSE) not to follow directory symlinks
+    # even if the project does not set this policy to NEW.
+    cmake_policy(SET CMP0009 NEW)
+    file(GLOB_RECURSE FILE_PATHS_ "${WDIR}/*")
+  cmake_policy(POP)
+  foreach(TMP_PATH ${FILE_PATHS_})
+    string(LENGTH "${WDIR}" WDIR_LEN)
+    string(SUBSTRING "${TMP_PATH}" ${WDIR_LEN} -1 TMP_PATH)
+    unset(TMP_PATH_FOUND_)
+
+    foreach(RELOCATION_PATH ${RPM_USED_PACKAGE_PREFIXES})
+      file(RELATIVE_PATH REL_PATH_ "${RELOCATION_PATH}" "${TMP_PATH}")
+      string(SUBSTRING "${REL_PATH_}" 0 2 PREFIX_)
+
+      if(NOT "${PREFIX_}" STREQUAL "..")
+        set(TPM_PATH_FOUND_ TRUE)
+        break()
+      endif()
+    endforeach()
+
+    if(NOT TPM_PATH_FOUND_)
+      message(AUTHOR_WARNING "CPackRPM:Warning: Path ${TMP_PATH} is not on one of the relocatable paths! Package will be partially relocatable.")
+    endif()
+  endforeach()
+
+  set(RPM_USED_PACKAGE_PREFIXES "${RPM_USED_PACKAGE_PREFIXES}" PARENT_SCOPE)
+  set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}" PARENT_SCOPE)
+endfunction()
+
+function(cpack_rpm_prepare_content_list)
+  # get files list
+  cmake_policy(PUSH)
+    cmake_policy(SET CMP0009 NEW)
+    file(GLOB_RECURSE CPACK_RPM_INSTALL_FILES LIST_DIRECTORIES true RELATIVE "${WDIR}" "${WDIR}/*")
+  cmake_policy(POP)
+  set(CPACK_RPM_INSTALL_FILES "/${CPACK_RPM_INSTALL_FILES}")
+  string(REPLACE ";" ";/" CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}")
+
+  # if we are creating a relocatable package, omit parent directories of
+  # CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list"
+  # which is passed to the find command that generates the content-list
+  if(CPACK_RPM_PACKAGE_RELOCATABLE)
+    # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are
+    # destinct parent paths of other relocation paths and remove the
+    # final element (so the install-prefix dir itself is not omitted
+    # from the RPM's content-list)
+    list(SORT RPM_USED_PACKAGE_PREFIXES)
+    set(_DISTINCT_PATH "NOT_SET")
+    foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES})
+      if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*")
+        set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}")
+
+        string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS " ${_RPM_RELOCATION_PREFIX}")
+        list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1)
+        unset(_TMP_LIST)
+        # Now generate all of the parent dirs of the relocation path
+        foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS})
+          list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}")
+          string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}")
+          separate_arguments(_OMIT_DIR)
+          list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR})
+        endforeach()
+      endif()
+    endforeach()
+  endif()
+
+  if(CPACK_RPM_PACKAGE_DEBUG)
+    message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}")
+  endif()
+
+  if(NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST)
+    set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include)
+    if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION)
+      message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.")
+      list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}")
+    endif()
+  endif()
+
+  if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}")
+    endif()
+    list(APPEND _RPM_DIRS_TO_OMIT ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST})
+  endif()
+
+  if(CPACK_RPM_PACKAGE_DEBUG)
+    message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}")
+  endif()
+
+  list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES ${_RPM_DIRS_TO_OMIT})
+
+  # add man paths that will be compressed
+  # (copied from /usr/lib/rpm/brp-compress - script that does the actual
+  # compressing)
+  list(APPEND MAN_LOCATIONS "/usr/man/man.*" "/usr/man/.*/man.*" "/usr/info.*"
+    "/usr/share/man/man.*" "/usr/share/man/.*/man.*" "/usr/share/info.*"
+    "/usr/kerberos/man.*" "/usr/X11R6/man/man.*" "/usr/lib/perl5/man/man.*"
+    "/usr/share/doc/.*/man/man.*" "/usr/lib/.*/man/man.*")
+
+  if(CPACK_RPM_ADDITIONAL_MAN_DIRS)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: CPACK_RPM_ADDITIONAL_MAN_DIRS= ${CPACK_RPM_ADDITIONAL_MAN_DIRS}")
+    endif()
+    list(APPEND MAN_LOCATIONS ${CPACK_RPM_ADDITIONAL_MAN_DIRS})
+  endif()
+
+  foreach(PACK_LOCATION IN LISTS CPACK_RPM_INSTALL_FILES)
+    foreach(MAN_LOCATION IN LISTS MAN_LOCATIONS)
+      # man pages are files inside a certain location
+      if(PACK_LOCATION MATCHES "${MAN_LOCATION}/"
+        AND NOT IS_DIRECTORY "${WDIR}${PACK_LOCATION}"
+        AND NOT IS_SYMLINK "${WDIR}${PACK_LOCATION}")
+        list(FIND CPACK_RPM_INSTALL_FILES "${PACK_LOCATION}" INDEX)
+        # insert file location that covers compressed man pages
+        # even if using a wildcard causes duplicates as those are
+        # handled by RPM and we still keep the same file list
+        # in spec file - wildcard only represents file type (e.g. .gz)
+        list(INSERT CPACK_RPM_INSTALL_FILES ${INDEX} "${PACK_LOCATION}*")
+        # remove file location that doesn't cover compressed man pages
+        math(EXPR INDEX ${INDEX}+1)
+        list(REMOVE_AT CPACK_RPM_INSTALL_FILES ${INDEX})
+
+        break()
+      endif()
+    endforeach()
+  endforeach()
+
+  set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}" PARENT_SCOPE)
+endfunction()
+
+function(cpack_rpm_symlink_get_relocation_prefixes LOCATION PACKAGE_PREFIXES RETURN_VARIABLE)
+  foreach(PKG_PREFIX IN LISTS PACKAGE_PREFIXES)
+    string(REGEX MATCH "^${PKG_PREFIX}/.*" FOUND_ "${LOCATION}")
+    if(FOUND_)
+      list(APPEND TMP_PREFIXES "${PKG_PREFIX}")
+    endif()
+  endforeach()
+
+  set(${RETURN_VARIABLE} "${TMP_PREFIXES}" PARENT_SCOPE)
+endfunction()
+
+function(cpack_rpm_symlink_create_relocation_script PACKAGE_PREFIXES)
+  list(LENGTH PACKAGE_PREFIXES LAST_INDEX)
+  set(SORTED_PACKAGE_PREFIXES "${PACKAGE_PREFIXES}")
+  list(SORT SORTED_PACKAGE_PREFIXES)
+  list(REVERSE SORTED_PACKAGE_PREFIXES)
+  math(EXPR LAST_INDEX ${LAST_INDEX}-1)
+
+  foreach(SYMLINK_INDEX RANGE ${LAST_INDEX})
+    list(GET SORTED_PACKAGE_PREFIXES ${SYMLINK_INDEX} SRC_PATH)
+    list(FIND PACKAGE_PREFIXES "${SRC_PATH}" SYMLINK_INDEX) # reverse magic
+    string(LENGTH "${SRC_PATH}" SRC_PATH_LEN)
+
+    set(PARTS_CNT 0)
+    set(SCRIPT_PART "if [ \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}\" != \"${SRC_PATH}\" ]; then\n")
+
+    # both paths relocated
+    foreach(POINT_INDEX RANGE ${LAST_INDEX})
+      list(GET SORTED_PACKAGE_PREFIXES ${POINT_INDEX} POINT_PATH)
+      list(FIND PACKAGE_PREFIXES "${POINT_PATH}" POINT_INDEX) # reverse magic
+      string(LENGTH "${POINT_PATH}" POINT_PATH_LEN)
+
+      if(_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX})
+        if("${SYMLINK_INDEX}" EQUAL "${POINT_INDEX}")
+          set(INDENT "")
+        else()
+          set(SCRIPT_PART "${SCRIPT_PART}  if [ \"$RPM_INSTALL_PREFIX${POINT_INDEX}\" != \"${POINT_PATH}\" ]; then\n")
+          set(INDENT "  ")
+        endif()
+
+        foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX})
+          math(EXPR PARTS_CNT ${PARTS_CNT}+1)
+
+          math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
+          list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
+          string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
+
+          math(EXPR SRC_PATH_END ${SPLIT_INDEX}-${SRC_PATH_LEN})
+          string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${SRC_PATH_LEN} ${SRC_PATH_END} SYMLINK_)
+
+          math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1+${POINT_PATH_LEN})
+          string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
+
+          set(SCRIPT_PART "${SCRIPT_PART}  ${INDENT}if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
+          set(SCRIPT_PART "${SCRIPT_PART}    ${INDENT}ln -s \"$RPM_INSTALL_PREFIX${POINT_INDEX}${POINT_}\" \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}${SYMLINK_}\"\n")
+          set(SCRIPT_PART "${SCRIPT_PART}    ${INDENT}CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n")
+          set(SCRIPT_PART "${SCRIPT_PART}  ${INDENT}fi\n")
+        endforeach()
+
+        if(NOT "${SYMLINK_INDEX}" EQUAL "${POINT_INDEX}")
+          set(SCRIPT_PART "${SCRIPT_PART}  fi\n")
+        endif()
+      endif()
+    endforeach()
+
+    # source path relocated
+    if(_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X)
+      foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X)
+        math(EXPR PARTS_CNT ${PARTS_CNT}+1)
+
+        math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
+        list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
+        string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
+
+        math(EXPR SRC_PATH_END ${SPLIT_INDEX}-${SRC_PATH_LEN})
+        string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${SRC_PATH_LEN} ${SRC_PATH_END} SYMLINK_)
+
+        math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1)
+        string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
+
+        set(SCRIPT_PART "${SCRIPT_PART}  if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
+        set(SCRIPT_PART "${SCRIPT_PART}    ln -s \"${POINT_}\" \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}${SYMLINK_}\"\n")
+        set(SCRIPT_PART "${SCRIPT_PART}    CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n")
+        set(SCRIPT_PART "${SCRIPT_PART}  fi\n")
+      endforeach()
+    endif()
+
+    if(PARTS_CNT)
+      set(SCRIPT "${SCRIPT_PART}")
+      set(SCRIPT "${SCRIPT}fi\n")
+    endif()
+  endforeach()
+
+  # point path relocated
+  foreach(POINT_INDEX RANGE ${LAST_INDEX})
+    list(GET SORTED_PACKAGE_PREFIXES ${POINT_INDEX} POINT_PATH)
+    list(FIND PACKAGE_PREFIXES "${POINT_PATH}" POINT_INDEX) # reverse magic
+    string(LENGTH "${POINT_PATH}" POINT_PATH_LEN)
+
+    if(_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX})
+      set(SCRIPT "${SCRIPT}if [ \"$RPM_INSTALL_PREFIX${POINT_INDEX}\" != \"${POINT_PATH}\" ]; then\n")
+
+      foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX})
+        math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
+        list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
+        string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
+
+        string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} 0 ${SPLIT_INDEX} SYMLINK_)
+
+        math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1+${POINT_PATH_LEN})
+        string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
+
+        set(SCRIPT "${SCRIPT}  if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
+        set(SCRIPT "${SCRIPT}    ln -s \"$RPM_INSTALL_PREFIX${POINT_INDEX}${POINT_}\" \"${SYMLINK_}\"\n")
+        set(SCRIPT "${SCRIPT}    CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n")
+        set(SCRIPT "${SCRIPT}  fi\n")
+      endforeach()
+
+      set(SCRIPT "${SCRIPT}fi\n")
+    endif()
+  endforeach()
+
+  # no path relocated
+  if(_RPM_RELOCATION_SCRIPT_X_X)
+    foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_X_X)
+      math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
+      list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
+      string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
+
+      string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} 0 ${SPLIT_INDEX} SYMLINK_)
+
+      math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1)
+      string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
+
+      set(SCRIPT "${SCRIPT}if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
+      set(SCRIPT "${SCRIPT}  ln -s \"${POINT_}\" \"${SYMLINK_}\"\n")
+      set(SCRIPT "${SCRIPT}fi\n")
+    endforeach()
+  endif()
+
+  set(RPM_SYMLINK_POSTINSTALL "${SCRIPT}" PARENT_SCOPE)
+endfunction()
+
+function(cpack_rpm_symlink_add_for_relocation_script PACKAGE_PREFIXES SYMLINK SYMLINK_RELOCATION_PATHS POINT POINT_RELOCATION_PATHS)
+  list(LENGTH SYMLINK_RELOCATION_PATHS SYMLINK_PATHS_COUTN)
+  list(LENGTH POINT_RELOCATION_PATHS POINT_PATHS_COUNT)
+
+  list(APPEND _RPM_RELOCATION_SCRIPT_PAIRS "${SYMLINK}:${POINT}")
+  list(LENGTH _RPM_RELOCATION_SCRIPT_PAIRS PAIR_NO)
+
+  if(SYMLINK_PATHS_COUTN)
+    foreach(SYMLINK_RELOC_PATH IN LISTS SYMLINK_RELOCATION_PATHS)
+      list(FIND PACKAGE_PREFIXES "${SYMLINK_RELOC_PATH}" SYMLINK_INDEX)
+
+      # source path relocated
+      list(APPEND _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X "${PAIR_NO}")
+      list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X")
+
+      foreach(POINT_RELOC_PATH IN LISTS POINT_RELOCATION_PATHS)
+        list(FIND PACKAGE_PREFIXES "${POINT_RELOC_PATH}" POINT_INDEX)
+
+        # both paths relocated
+        list(APPEND _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX} "${PAIR_NO}")
+        list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX}")
+
+        # point path relocated
+        list(APPEND _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX} "${PAIR_NO}")
+        list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}")
+      endforeach()
+    endforeach()
+  elseif(POINT_PATHS_COUNT)
+    foreach(POINT_RELOC_PATH IN LISTS POINT_RELOCATION_PATHS)
+      list(FIND PACKAGE_PREFIXES "${POINT_RELOC_PATH}" POINT_INDEX)
+
+      # point path relocated
+      list(APPEND _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX} "${PAIR_NO}")
+      list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}")
+    endforeach()
+  endif()
+
+  # no path relocated
+  list(APPEND _RPM_RELOCATION_SCRIPT_X_X "${PAIR_NO}")
+  list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_X")
+
+  # place variables into parent scope
+  foreach(VAR IN LISTS RELOCATION_VARS)
+    set(${VAR} "${${VAR}}" PARENT_SCOPE)
+  endforeach()
+  set(_RPM_RELOCATION_SCRIPT_PAIRS "${_RPM_RELOCATION_SCRIPT_PAIRS}" PARENT_SCOPE)
+  set(REQUIRES_SYMLINK_RELOCATION_SCRIPT "true" PARENT_SCOPE)
+  set(DIRECTIVE "%ghost " PARENT_SCOPE)
+endfunction()
+
+function(cpack_rpm_prepare_install_files INSTALL_FILES_LIST WDIR PACKAGE_PREFIXES IS_RELOCATABLE)
+  # Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir
+  # This is necessary to avoid duplicate files since rpmbuild does
+  # recursion on its own when encountering a pathname which is a directory
+  # which is not flagged as %dir
+  string(STRIP "${INSTALL_FILES_LIST}" INSTALL_FILES_LIST)
+  string(REPLACE "\n" ";" INSTALL_FILES_LIST
+                          "${INSTALL_FILES_LIST}")
+  string(REPLACE "\"" "" INSTALL_FILES_LIST
+                          "${INSTALL_FILES_LIST}")
+  string(LENGTH "${WDIR}" WDR_LEN_)
+
+  list(SORT INSTALL_FILES_LIST) # make file order consistent on all platforms
+
+  foreach(F IN LISTS INSTALL_FILES_LIST)
+    unset(DIRECTIVE)
+
+    if(IS_SYMLINK "${WDIR}/${F}")
+      if(IS_RELOCATABLE)
+        # check that symlink has relocatable format
+        get_filename_component(SYMLINK_LOCATION_ "${WDIR}/${F}" DIRECTORY)
+        execute_process(COMMAND ls -la "${WDIR}/${F}"
+                  WORKING_DIRECTORY "${WDIR}"
+                  OUTPUT_VARIABLE SYMLINK_POINT_
+                  OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+        string(FIND "${SYMLINK_POINT_}" "->" SYMLINK_POINT_INDEX_ REVERSE)
+        math(EXPR SYMLINK_POINT_INDEX_ ${SYMLINK_POINT_INDEX_}+3)
+        string(LENGTH "${SYMLINK_POINT_}" SYMLINK_POINT_LENGTH_)
+
+        # get destination path
+        string(SUBSTRING "${SYMLINK_POINT_}" ${SYMLINK_POINT_INDEX_} ${SYMLINK_POINT_LENGTH_} SYMLINK_POINT_)
+
+        # check if path is relative or absolute
+        string(SUBSTRING "${SYMLINK_POINT_}" 0 1 SYMLINK_IS_ABSOLUTE_)
+
+        if(${SYMLINK_IS_ABSOLUTE_} STREQUAL "/")
+          # prevent absolute paths from having /../ or /./ section inside of them
+          get_filename_component(SYMLINK_POINT_ "${SYMLINK_POINT_}" ABSOLUTE)
+        else()
+          # handle relative path
+          get_filename_component(SYMLINK_POINT_ "${SYMLINK_LOCATION_}/${SYMLINK_POINT_}" ABSOLUTE)
+        endif()
+
+        # recalculate path length after conversion to canonical form
+        string(LENGTH "${SYMLINK_POINT_}" SYMLINK_POINT_LENGTH_)
+
+        if(SYMLINK_POINT_ MATCHES "${WDIR}/.*")
+          # only symlinks that are pointing inside the packaging structure should be checked for relocation
+          string(SUBSTRING "${SYMLINK_POINT_}" ${WDR_LEN_} -1 SYMLINK_POINT_WD_)
+          cpack_rpm_symlink_get_relocation_prefixes("${F}" "${PACKAGE_PREFIXES}" "SYMLINK_RELOCATIONS")
+          cpack_rpm_symlink_get_relocation_prefixes("${SYMLINK_POINT_WD_}" "${PACKAGE_PREFIXES}" "POINT_RELOCATIONS")
+
+          list(LENGTH SYMLINK_RELOCATIONS SYMLINK_RELOCATIONS_COUNT)
+          list(LENGTH POINT_RELOCATIONS POINT_RELOCATIONS_COUNT)
+        else()
+          # location pointed to is ouside WDR so it should be treated as a permanent symlink
+          set(SYMLINK_POINT_WD_ "${SYMLINK_POINT_}")
+
+          unset(SYMLINK_RELOCATIONS)
+          unset(POINT_RELOCATIONS)
+          unset(SYMLINK_RELOCATIONS_COUNT)
+          unset(POINT_RELOCATIONS_COUNT)
+
+          message(AUTHOR_WARNING "CPackRPM:Warning: Symbolic link '${F}' points to location that is outside packaging path! Link will possibly not be relocatable.")
+        endif()
+
+        if(SYMLINK_RELOCATIONS_COUNT AND POINT_RELOCATIONS_COUNT)
+          # find matching
+          foreach(SYMLINK_RELOCATION_PREFIX IN LISTS SYMLINK_RELOCATIONS)
+            list(FIND POINT_RELOCATIONS "${SYMLINK_RELOCATION_PREFIX}" FOUND_INDEX)
+            if(NOT ${FOUND_INDEX} EQUAL -1)
+              break()
+            endif()
+          endforeach()
+
+          if(NOT ${FOUND_INDEX} EQUAL -1)
+            # symlinks have the same subpath
+            if(${SYMLINK_RELOCATIONS_COUNT} EQUAL 1 AND ${POINT_RELOCATIONS_COUNT} EQUAL 1)
+              # permanent symlink
+              get_filename_component(SYMLINK_LOCATION_ "${F}" DIRECTORY)
+              file(RELATIVE_PATH FINAL_PATH_ ${SYMLINK_LOCATION_} ${SYMLINK_POINT_WD_})
+              execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${FINAL_PATH_}" "${WDIR}/${F}")
+            else()
+              # relocation subpaths
+              cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}"
+                  "${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}")
+            endif()
+          else()
+            # not on the same relocation path
+            cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}"
+                "${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}")
+          endif()
+        elseif(POINT_RELOCATIONS_COUNT)
+          # point is relocatable
+          cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}"
+              "${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}")
+        else()
+          # is not relocatable or points to non relocatable path - permanent symlink
+          execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${SYMLINK_POINT_WD_}" "${WDIR}/${F}")
+        endif()
+      endif()
+    elseif(IS_DIRECTORY "${WDIR}/${F}")
+      set(DIRECTIVE "%dir ")
+    endif()
+
+    set(INSTALL_FILES "${INSTALL_FILES}${DIRECTIVE}\"${F}\"\n")
+  endforeach()
+
+  if(REQUIRES_SYMLINK_RELOCATION_SCRIPT)
+    cpack_rpm_symlink_create_relocation_script("${PACKAGE_PREFIXES}")
+  endif()
+
+  set(RPM_SYMLINK_POSTINSTALL "${RPM_SYMLINK_POSTINSTALL}" PARENT_SCOPE)
+  set(CPACK_RPM_INSTALL_FILES "${INSTALL_FILES}" PARENT_SCOPE)
+endfunction()
+
+if(CMAKE_BINARY_DIR)
+  message(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.")
+endif()
+
+if(NOT UNIX)
+  message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.")
+endif()
+
+function(cpack_rpm_variable_fallback OUTPUT_VAR_NAME)
+  set(FALLBACK_VAR_NAMES ${ARGN})
+
+  foreach(variable_name IN LISTS FALLBACK_VAR_NAMES)
+    if(${variable_name})
+      set(${OUTPUT_VAR_NAME} "${${variable_name}}" PARENT_SCOPE)
+      break()
+    endif()
+  endforeach()
+endfunction()
+
+function(cpack_rpm_generate_package)
+  # rpmbuild is the basic command for building RPM package
+  # it may be a simple (symbolic) link to rpm command.
+  find_program(RPMBUILD_EXECUTABLE rpmbuild)
+
+  # Check version of the rpmbuild tool this would be easier to
+  # track bugs with users and CPackRPM debug mode.
+  # We may use RPM version in order to check for available version dependent features
+  if(RPMBUILD_EXECUTABLE)
+    execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version
+                    OUTPUT_VARIABLE _TMP_VERSION
+                    ERROR_QUIET
+                    OUTPUT_STRIP_TRAILING_WHITESPACE)
+    string(REGEX REPLACE "^.* " ""
+           RPMBUILD_EXECUTABLE_VERSION
+           ${_TMP_VERSION})
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>")
+    endif()
+  endif()
+
+  if(NOT RPMBUILD_EXECUTABLE)
+    message(FATAL_ERROR "RPM package requires rpmbuild executable")
+  endif()
+
+  # Display lsb_release output if DEBUG mode enable
+  # This will help to diagnose problem with CPackRPM
+  # because we will know on which kind of Linux we are
+  if(CPACK_RPM_PACKAGE_DEBUG)
+    find_program(LSB_RELEASE_EXECUTABLE lsb_release)
+    if(LSB_RELEASE_EXECUTABLE)
+      execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a
+                      OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT
+                      ERROR_QUIET
+                      OUTPUT_STRIP_TRAILING_WHITESPACE)
+      string(REGEX REPLACE "\n" ", "
+             LSB_RELEASE_OUTPUT
+             ${_TMP_LSB_RELEASE_OUTPUT})
+    else ()
+      set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!")
+    endif()
+    message("CPackRPM:Debug: LSB_RELEASE  = ${LSB_RELEASE_OUTPUT}")
+  endif()
+
+  # We may use RPM version in the future in order
+  # to shut down warning about space in buildtree
+  # some recent RPM version should support space in different places.
+  # not checked [yet].
+  if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*")
+    message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.")
+  endif()
+
+  # If rpmbuild is found
+  # we try to discover alien since we may be on non RPM distro like Debian.
+  # In this case we may try to to use more advanced features
+  # like generating RPM directly from DEB using alien.
+  # FIXME feature not finished (yet)
+  find_program(ALIEN_EXECUTABLE alien)
+  if(ALIEN_EXECUTABLE)
+    message(STATUS "alien found, we may be on a Debian based distro.")
+  endif()
+
+  # Are we packaging components ?
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER)
+  endif()
+
+  set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}")
+
+  #
+  # Use user-defined RPM specific variables value
+  # or generate reasonable default value from
+  # CPACK_xxx generic values.
+  # The variables comes from the needed (mandatory or not)
+  # values found in the RPM specification file aka ".spec" file.
+  # The variables which may/should be defined are:
+  #
+
+  # CPACK_RPM_PACKAGE_SUMMARY (mandatory)
+
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_SUMMARY"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_SUMMARY")
+  endif()
+
+  if(NOT CPACK_RPM_PACKAGE_SUMMARY)
+    if(CPACK_PACKAGE_DESCRIPTION_SUMMARY)
+      set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
+    else()
+      # if neither var is defined lets use the name as summary
+      string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY)
+    endif()
+  endif()
+
+  # CPACK_RPM_PACKAGE_NAME (mandatory)
+  if(NOT CPACK_RPM_PACKAGE_NAME)
+    string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME)
+  endif()
+
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    set(CPACK_RPM_PACKAGE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_COMPONENT}")
+    cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_NAME"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_NAME"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_NAME")
+  endif()
+
+  # CPACK_RPM_PACKAGE_VERSION (mandatory)
+  if(NOT CPACK_RPM_PACKAGE_VERSION)
+    if(NOT CPACK_PACKAGE_VERSION)
+      message(FATAL_ERROR "RPM package requires a package version")
+    endif()
+    set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION})
+  endif()
+  # Replace '-' in version with '_'
+  # '-' character is  an Illegal RPM version character
+  # it is illegal because it is used to separate
+  # RPM "Version" from RPM "Release"
+  string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION})
+
+  # CPACK_RPM_PACKAGE_ARCHITECTURE (mandatory)
+  if(NOT CPACK_RPM_PACKAGE_ARCHITECTURE)
+    execute_process(COMMAND uname "-m"
+                    OUTPUT_VARIABLE CPACK_RPM_PACKAGE_ARCHITECTURE
+                    OUTPUT_STRIP_TRAILING_WHITESPACE)
+  else()
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
+    endif()
+  endif()
+
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_ARCHITECTURE"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_ARCHITECTURE")
+
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: using component build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
+    endif()
+  endif()
+
+  if(${CPACK_RPM_PACKAGE_ARCHITECTURE} STREQUAL "noarch")
+    set(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
+  else()
+    set(TMP_RPM_BUILDARCH "")
+  endif()
+
+  # CPACK_RPM_PACKAGE_RELEASE
+  # The RPM release is the numbering of the RPM package ITSELF
+  # this is the version of the PACKAGING and NOT the version
+  # of the CONTENT of the package.
+  # You may well need to generate a new RPM package release
+  # without changing the version of the packaged software.
+  # This is the case when the packaging is buggy (not) the software :=)
+  # If not set, 1 is a good candidate
+  if(NOT CPACK_RPM_PACKAGE_RELEASE)
+    set(CPACK_RPM_PACKAGE_RELEASE "1")
+  endif()
+
+  if(CPACK_RPM_PACKAGE_RELEASE_DIST)
+    set(CPACK_RPM_PACKAGE_RELEASE "${CPACK_RPM_PACKAGE_RELEASE}%{?dist}")
+  endif()
+
+  # CPACK_RPM_PACKAGE_LICENSE
+  if(NOT CPACK_RPM_PACKAGE_LICENSE)
+    set(CPACK_RPM_PACKAGE_LICENSE "unknown")
+  endif()
+
+  # CPACK_RPM_PACKAGE_GROUP
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_GROUP"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_GROUP"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_GROUP")
+  endif()
+
+  if(NOT CPACK_RPM_PACKAGE_GROUP)
+    set(CPACK_RPM_PACKAGE_GROUP "unknown")
+  endif()
+
+  # CPACK_RPM_PACKAGE_VENDOR
+  if(NOT CPACK_RPM_PACKAGE_VENDOR)
+    if(CPACK_PACKAGE_VENDOR)
+      set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}")
+    else()
+      set(CPACK_RPM_PACKAGE_VENDOR "unknown")
+    endif()
+  endif()
+
+  # CPACK_RPM_PACKAGE_SOURCE
+  # The name of the source tarball in case we generate a source RPM
+
+  # CPACK_RPM_PACKAGE_DESCRIPTION
+  # The variable content may be either
+  #   - explicitly given by the user or
+  #   - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE
+  #     if it is defined
+  #   - set to a default value
+  #
+
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_DESCRIPTION"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_DESCRIPTION"
+      "CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION")
+  endif()
+
+  if(NOT CPACK_RPM_PACKAGE_DESCRIPTION)
+    if(CPACK_PACKAGE_DESCRIPTION_FILE)
+      file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION)
+    else ()
+      set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available")
+    endif ()
+  endif ()
+
+  # CPACK_RPM_COMPRESSION_TYPE
+  #
+  if (CPACK_RPM_COMPRESSION_TYPE)
+     if(CPACK_RPM_PACKAGE_DEBUG)
+       message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}")
+     endif()
+     if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma")
+       set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio")
+     endif()
+     if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz")
+       set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio")
+     endif()
+     if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2")
+       set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio")
+     endif()
+     if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip")
+       set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio")
+     endif()
+  else()
+     set(CPACK_RPM_COMPRESSION_TYPE_TMP "")
+  endif()
+
+  if(CPACK_PACKAGE_RELOCATABLE OR CPACK_RPM_PACKAGE_RELOCATABLE)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: Trying to build a relocatable package")
+    endif()
+    if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON"))
+      message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.")
+      set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE)
+    else()
+      set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files)
+      cpack_rpm_prepare_relocation_paths()
+      set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE)
+    endif()
+  endif()
+
+  # Check if additional fields for RPM spec header are given
+  # There may be some COMPONENT specific variables as well
+  # If component specific var is not provided we use the global one
+  # for each component
+  foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}")
+    endif()
+    if(CPACK_RPM_PACKAGE_COMPONENT)
+      cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}"
+        "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}"
+        "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_${_RPM_SPEC_HEADER}")
+    endif()
+
+    if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER})
+      if(CPACK_RPM_PACKAGE_DEBUG)
+        message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}")
+      endif()
+      set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}})
+    endif()
+
+    # Treat the RPM Spec keyword iff it has been properly defined
+    if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP)
+      # Transform NAME --> Name e.g. PROVIDES --> Provides
+      # The Upper-case first letter and lowercase tail is the
+      # appropriate value required in the final RPM spec file.
+      string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL)
+      string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL)
+      string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME)
+      set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}")
+      # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file.
+      set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN)
+      list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND)
+      if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1)
+        string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}")
+        set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})")
+      endif()
+      if(CPACK_RPM_PACKAGE_DEBUG)
+        message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}")
+      endif()
+      set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}")
+      unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP)
+    endif()
+  endforeach()
+
+  # CPACK_RPM_SPEC_INSTALL_POST
+  # May be used to define a RPM post intallation script
+  # for example setting it to "/bin/true" may prevent
+  # rpmbuild from stripping binaries.
+  if(CPACK_RPM_SPEC_INSTALL_POST)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}")
+    endif()
+    set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}")
+  endif()
+
+  # CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE)
+  # CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE)
+  # May be used to embed a post (un)installation script in the spec file.
+  # The refered script file(s) will be read and directly
+  # put after the %post or %postun section
+  # ----------------------------------------------------------------
+  # CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE)
+  # CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE)
+  # May be used to embed a pre (un)installation script in the spec file.
+  # The refered script file(s) will be read and directly
+  # put after the %pre or %preun section
+  foreach(RPM_SCRIPT_FILE_TYPE_ "INSTALL" "UNINSTALL")
+    foreach(RPM_SCRIPT_FILE_TIME_ "PRE" "POST")
+      set("CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE"
+        "${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE}")
+
+      if(CPACK_RPM_PACKAGE_COMPONENT)
+        cpack_rpm_variable_fallback("CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE"
+          "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE"
+          "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE")
+      endif()
+
+      # Handle file if it has been specified
+      if(CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE)
+        if(EXISTS ${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE})
+          file(READ ${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE}
+            "CPACK_RPM_SPEC_${RPM_SCRIPT_FILE_TIME_}${RPM_SCRIPT_FILE_TYPE_}")
+        else()
+          message("CPackRPM:Warning: CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE <${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE}> does not exists - ignoring")
+        endif()
+      else()
+        # reset SPEC var value if no file has been specified
+        # (either globally or component-wise)
+        set("CPACK_RPM_SPEC_${RPM_SCRIPT_FILE_TIME_}${RPM_SCRIPT_FILE_TYPE_}" "")
+      endif()
+    endforeach()
+  endforeach()
+
+  # CPACK_RPM_CHANGELOG_FILE
+  # May be used to embed a changelog in the spec file.
+  # The refered file will be read and directly put after the %changelog section
+  if(CPACK_RPM_CHANGELOG_FILE)
+    if(EXISTS ${CPACK_RPM_CHANGELOG_FILE})
+      file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG)
+    else()
+      message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring")
+    endif()
+  else()
+    set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard <eric.noulard@gmail.com> - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n  Generated by CPack RPM (no Changelog file were provided)")
+  endif()
+
+  # CPACK_RPM_SPEC_MORE_DEFINE
+  # This is a generated spec rpm file spaceholder
+  if(CPACK_RPM_SPEC_MORE_DEFINE)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}")
+    endif()
+  endif()
+
+  # Now we may create the RPM build tree structure
+  set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}")
+  message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}")
+  # Prepare RPM build tree
+  file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR})
+  file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp)
+  file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD)
+  file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS)
+  file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES)
+  file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS)
+  file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS)
+
+  # it seems rpmbuild can't handle spaces in the path
+  # neither escaping (as below) nor putting quotes around the path seem to help
+  #string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
+  set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
+
+  cpack_rpm_prepare_content_list()
+
+  # In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_<COMPONENT>
+  #                   into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
+  #         otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES
+  # This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    if(CPACK_ABSOLUTE_DESTINATION_FILES)
+      cpack_rpm_variable_fallback("COMPONENT_FILES_TAG"
+        "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}"
+        "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}")
+      set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}")
+      if(CPACK_RPM_PACKAGE_DEBUG)
+        message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>")
+        message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}")
+      endif()
+    endif()
+  else()
+    if(CPACK_ABSOLUTE_DESTINATION_FILES)
+      set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}")
+    endif()
+  endif()
+
+  # In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM_<COMPONENT>_USER_FILELIST.
+  set(CPACK_RPM_USER_FILELIST_INTERNAL "")
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    cpack_rpm_variable_fallback("CPACK_RPM_USER_FILELIST_INTERNAL"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_USER_FILELIST")
+
+    if(CPACK_RPM_PACKAGE_DEBUG AND CPACK_RPM_USER_FILELIST_INTERNAL)
+      message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>")
+      message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}")
+    endif()
+  elseif(CPACK_RPM_USER_FILELIST)
+    set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}")
+  endif()
+
+  # Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL
+  # Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
+  #                      or CPACK_RPM_INSTALL_FILES,
+  # hence it must be done before these auto-generated lists are processed.
+  if(CPACK_RPM_USER_FILELIST_INTERNAL)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>")
+    endif()
+
+    # Create CMake list from CPACK_RPM_INSTALL_FILES
+    string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
+    string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST
+                            "${CPACK_RPM_INSTALL_FILES_LIST}")
+    string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST
+                            "${CPACK_RPM_INSTALL_FILES_LIST}")
+
+    set(CPACK_RPM_USER_INSTALL_FILES "")
+    foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL)
+      string(REGEX REPLACE "%[A-Za-z0-9\(\),-]* " "" F_PATH ${F})
+      string(REGEX MATCH "%[A-Za-z0-9\(\),-]*" F_PREFIX ${F})
+
+      if(CPACK_RPM_PACKAGE_DEBUG)
+        message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>")
+      endif()
+      if(F_PREFIX)
+        set(F_PREFIX "${F_PREFIX} ")
+      endif()
+      # Rebuild the user list file
+      set(CPACK_RPM_USER_INSTALL_FILES "${CPACK_RPM_USER_INSTALL_FILES}${F_PREFIX}\"${F_PATH}\"\n")
+
+      # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
+      list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH})
+      # ABSOLUTE destination files list may not exists at all
+      if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
+        list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH})
+      endif()
+    endforeach()
+
+    # Rebuild CPACK_RPM_INSTALL_FILES
+    set(CPACK_RPM_INSTALL_FILES "")
+    foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
+      set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n")
+    endforeach()
+  else()
+    set(CPACK_RPM_USER_INSTALL_FILES "")
+  endif()
+
+  if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}")
+    endif()
+    # Remove trailing space
+    string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
+    # Transform endline separated - string into CMake List
+    string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
+    # Remove unecessary quotes
+    string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
+    # Remove ABSOLUTE install file from INSTALL FILE LIST
+    list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL})
+    # Rebuild INSTALL_FILES
+    set(CPACK_RPM_INSTALL_FILES "")
+    foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
+      set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}\"${F}\"\n")
+    endforeach()
+    # Build ABSOLUTE_INSTALL_FILES
+    set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "")
+    foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
+      set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "${CPACK_RPM_ABSOLUTE_INSTALL_FILES}%config \"${F}\"\n")
+    endforeach()
+    if(CPACK_RPM_PACKAGE_DEBUG)
+      message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}")
+      message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}")
+    endif()
+  else()
+    # reset vars in order to avoid leakage of value(s) from one component to another
+    set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "")
+  endif()
+
+  # Prepare install files
+  cpack_rpm_prepare_install_files(
+      "${CPACK_RPM_INSTALL_FILES}"
+      "${WDIR}"
+      "${RPM_USED_PACKAGE_PREFIXES}"
+      "${CPACK_RPM_PACKAGE_RELOCATABLE}"
+    )
+
+  # set default user and group
+  foreach(_PERM_TYPE "USER" "GROUP")
+    if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE})
+      set(TMP_DEFAULT_${_PERM_TYPE} "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}}")
+    elseif(CPACK_RPM_DEFAULT_${_PERM_TYPE})
+      set(TMP_DEFAULT_${_PERM_TYPE} "${CPACK_RPM_DEFAULT_${_PERM_TYPE}}")
+    else()
+      set(TMP_DEFAULT_${_PERM_TYPE} "root")
+    endif()
+  endforeach()
+
+  # set default file and dir permissions
+  foreach(_PERM_TYPE "FILE" "DIR")
+    if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS)
+      get_unix_permissions_octal_notation("CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS" "TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
+      set(_PERMISSIONS_VAR "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
+    elseif(CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS)
+      get_unix_permissions_octal_notation("CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS" "TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
+      set(_PERMISSIONS_VAR "CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
+    else()
+      set(TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS "-")
+    endif()
+  endforeach()
+
+  # The name of the final spec file to be used by rpmbuild
+  set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}.spec")
+
+  # Print out some debug information if we were asked for that
+  if(CPACK_RPM_PACKAGE_DEBUG)
+     message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY          = ${CPACK_TOPLEVEL_DIRECTORY}")
+     message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG                = ${CPACK_TOPLEVEL_TAG}")
+     message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY         = ${CPACK_TEMPORARY_DIRECTORY}")
+     message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME            = ${CPACK_OUTPUT_FILE_NAME}")
+     message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH            = ${CPACK_OUTPUT_FILE_PATH}")
+     message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME           = ${CPACK_PACKAGE_FILE_NAME}")
+     message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE         = ${CPACK_RPM_BINARY_SPECFILE}")
+     message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY   = ${CPACK_PACKAGE_INSTALL_DIRECTORY}")
+     message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}")
+  endif()
+
+  #
+  # USER generated/provided spec file handling.
+  #
+
+  # We can have a component specific spec file.
+  if(CPACK_RPM_PACKAGE_COMPONENT)
+    cpack_rpm_variable_fallback("CPACK_RPM_USER_BINARY_SPECFILE"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE"
+      "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_USER_BINARY_SPECFILE")
+  endif()
+
+  cpack_rpm_variable_fallback("CPACK_RPM_FILE_NAME"
+    "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_FILE_NAME"
+    "CPACK_RPM_FILE_NAME")
+  if(NOT CPACK_RPM_FILE_NAME STREQUAL "RPM-DEFAULT")
+    if(CPACK_RPM_FILE_NAME)
+      cmake_policy(PUSH)
+        cmake_policy(SET CMP0010 NEW)
+        if(NOT CPACK_RPM_FILE_NAME MATCHES ".*\\.rpm")
+      cmake_policy(POP)
+          message(FATAL_ERROR "'${CPACK_RPM_FILE_NAME}' is not a valid RPM package file name as it must end with '.rpm'!")
+        endif()
+      cmake_policy(POP)
+    else()
+      # old file name format for back compatibility
+      set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}")
+    endif()
+    # else example:
+    #set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm")
+
+    set(FILE_NAME_DEFINE "%define _rpmfilename ${CPACK_RPM_FILE_NAME}")
+  endif()
+
+  # We should generate a USER spec file template:
+  #  - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
+  #  - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE
+  if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)
+     file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
+      "# -*- rpm-spec -*-
+BuildRoot:      \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@
+Summary:        \@CPACK_RPM_PACKAGE_SUMMARY\@
+Name:           \@CPACK_RPM_PACKAGE_NAME\@
+Version:        \@CPACK_RPM_PACKAGE_VERSION\@
+Release:        \@CPACK_RPM_PACKAGE_RELEASE\@
+License:        \@CPACK_RPM_PACKAGE_LICENSE\@
+Group:          \@CPACK_RPM_PACKAGE_GROUP\@
+Vendor:         \@CPACK_RPM_PACKAGE_VENDOR\@
+\@TMP_RPM_URL\@
+\@TMP_RPM_REQUIRES\@
+\@TMP_RPM_REQUIRES_PRE\@
+\@TMP_RPM_REQUIRES_POST\@
+\@TMP_RPM_REQUIRES_PREUN\@
+\@TMP_RPM_REQUIRES_POSTUN\@
+\@TMP_RPM_PROVIDES\@
+\@TMP_RPM_OBSOLETES\@
+\@TMP_RPM_CONFLICTS\@
+\@TMP_RPM_AUTOPROV\@
+\@TMP_RPM_AUTOREQ\@
+\@TMP_RPM_AUTOREQPROV\@
+\@TMP_RPM_BUILDARCH\@
+\@TMP_RPM_PREFIXES\@
+
+%define _rpmdir \@CPACK_RPM_DIRECTORY\@
+\@FILE_NAME_DEFINE\@
+%define _unpackaged_files_terminate_build 0
+%define _topdir \@CPACK_RPM_DIRECTORY\@
+\@TMP_RPM_SPEC_INSTALL_POST\@
+\@CPACK_RPM_SPEC_MORE_DEFINE\@
+\@CPACK_RPM_COMPRESSION_TYPE_TMP\@
+
+%description
+\@CPACK_RPM_PACKAGE_DESCRIPTION\@
+
+# This is a shortcutted spec file generated by CMake RPM generator
+# we skip _install step because CPack does that for us.
+# We do only save CPack installed tree in _prepr
+# and then restore it in build.
+%prep
+mv $RPM_BUILD_ROOT \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\"
+
+#p build
+
+%install
+if [ -e $RPM_BUILD_ROOT ];
+then
+  rm -rf $RPM_BUILD_ROOT
+fi
+mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT
+
+%clean
+
+%post
+\@RPM_SYMLINK_POSTINSTALL\@
+\@CPACK_RPM_SPEC_POSTINSTALL\@
+
+%postun
+\@CPACK_RPM_SPEC_POSTUNINSTALL\@
+
+%pre
+\@CPACK_RPM_SPEC_PREINSTALL\@
+
+%preun
+\@CPACK_RPM_SPEC_PREUNINSTALL\@
+
+%files
+%defattr(\@TMP_DEFAULT_FILE_PERMISSIONS\@,\@TMP_DEFAULT_USER\@,\@TMP_DEFAULT_GROUP\@,\@TMP_DEFAULT_DIR_PERMISSIONS\@)
+\@CPACK_RPM_INSTALL_FILES\@
+\@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@
+\@CPACK_RPM_USER_INSTALL_FILES\@
+
+%changelog
+\@CPACK_RPM_SPEC_CHANGELOG\@
+")
+    # Stop here if we were asked to only generate a template USER spec file
+    # The generated file may then be used as a template by user who wants
+    # to customize their own spec file.
+    if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE)
+       message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file templare is: ${CPACK_RPM_BINARY_SPECFILE}.in")
+    endif()
+  endif()
+
+  # After that we may either use a user provided spec file
+  # or generate one using appropriate variables value.
+  if(CPACK_RPM_USER_BINARY_SPECFILE)
+    # User may have specified SPECFILE just use it
+    message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}")
+    # The user provided file is processed for @var replacement
+    configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
+  else()
+    # No User specified spec file, will use the generated spec file
+    message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}")
+    # Note the just created file is processed for @var replacement
+    configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
+  endif()
+
+  if(RPMBUILD_EXECUTABLE)
+    # Now call rpmbuild using the SPECFILE
+    execute_process(
+      COMMAND "${RPMBUILD_EXECUTABLE}" -bb
+              --define "_topdir ${CPACK_RPM_DIRECTORY}"
+              --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
+              --target "${CPACK_RPM_PACKAGE_ARCHITECTURE}"
+              "${CPACK_RPM_BINARY_SPECFILE}"
+      WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
+      RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT
+      ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err"
+      OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out")
+    if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT)
+      file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err RPMBUILDERR)
+      file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out RPMBUILDOUT)
+      message("CPackRPM:Debug: You may consult rpmbuild logs in: ")
+      message("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err")
+      message("CPackRPM:Debug: *** ${RPMBUILDERR} ***")
+      message("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out")
+      message("CPackRPM:Debug: *** ${RPMBUILDOUT} ***")
+    endif()
+  else()
+    if(ALIEN_EXECUTABLE)
+      message(FATAL_ERROR "RPM packaging through alien not done (yet)")
+    endif()
+  endif()
+
+  # find generated rpm files and take their names
+  cmake_policy(PUSH)
+    # Tell file(GLOB_RECURSE) not to follow directory symlinks
+    # even if the project does not set this policy to NEW.
+    cmake_policy(SET CMP0009 NEW)
+    file(GLOB_RECURSE GENERATED_FILES "${CPACK_RPM_DIRECTORY}/*.rpm")
+  cmake_policy(POP)
+
+  if(NOT GENERATED_FILES)
+    message(FATAL_ERROR "RPM package was not generated! ${CPACK_RPM_DIRECTORY}")
+  endif()
+
+  set(GEN_CPACK_OUTPUT_FILES "${GENERATED_FILES}" PARENT_SCOPE)
+
+  if(CPACK_RPM_PACKAGE_DEBUG)
+     message("CPackRPM:Debug: GEN_CPACK_OUTPUT_FILES = ${GENERATED_FILES}")
+  endif()
+endfunction()
+
+cpack_rpm_generate_package()
diff --git a/share/cmake-3.6/Modules/CPackWIX.cmake b/share/cmake-3.6/Modules/CPackWIX.cmake
new file mode 100644
index 0000000..3c90561
--- /dev/null
+++ b/share/cmake-3.6/Modules/CPackWIX.cmake
@@ -0,0 +1,270 @@
+#.rst:
+# CPackWIX
+# --------
+#
+# CPack WiX generator specific options
+#
+# Variables specific to CPack WiX generator
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# The following variables are specific to the installers built on
+# Windows using WiX.
+#
+# .. variable:: CPACK_WIX_UPGRADE_GUID
+#
+#  Upgrade GUID (``Product/@UpgradeCode``)
+#
+#  Will be automatically generated unless explicitly provided.
+#
+#  It should be explicitly set to a constant generated globally unique
+#  identifier (GUID) to allow your installers to replace existing
+#  installations that use the same GUID.
+#
+#  You may for example explicitly set this variable in your
+#  CMakeLists.txt to the value that has been generated per default.  You
+#  should not use GUIDs that you did not generate yourself or which may
+#  belong to other projects.
+#
+#  A GUID shall have the following fixed length syntax::
+#
+#   XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
+#
+#  (each X represents an uppercase hexadecimal digit)
+#
+# .. variable:: CPACK_WIX_PRODUCT_GUID
+#
+#  Product GUID (``Product/@Id``)
+#
+#  Will be automatically generated unless explicitly provided.
+#
+#  If explicitly provided this will set the Product Id of your installer.
+#
+#  The installer will abort if it detects a pre-existing installation that
+#  uses the same GUID.
+#
+#  The GUID shall use the syntax described for CPACK_WIX_UPGRADE_GUID.
+#
+# .. variable:: CPACK_WIX_LICENSE_RTF
+#
+#  RTF License File
+#
+#  If CPACK_RESOURCE_FILE_LICENSE has an .rtf extension it is used as-is.
+#
+#  If CPACK_RESOURCE_FILE_LICENSE has an .txt extension it is implicitly
+#  converted to RTF by the WiX Generator.
+#  The expected encoding of the .txt file is UTF-8.
+#
+#  With CPACK_WIX_LICENSE_RTF you can override the license file used by the
+#  WiX Generator in case CPACK_RESOURCE_FILE_LICENSE is in an unsupported
+#  format or the .txt -> .rtf conversion does not work as expected.
+#
+# .. variable:: CPACK_WIX_PRODUCT_ICON
+#
+#  The Icon shown next to the program name in Add/Remove programs.
+#
+#  If set, this icon is used in place of the default icon.
+#
+# .. variable:: CPACK_WIX_UI_REF
+#
+#  This variable allows you to override the Id of the ``<UIRef>`` element
+#  in the WiX template.
+#
+#  The default is ``WixUI_InstallDir`` in case no CPack components have
+#  been defined and ``WixUI_FeatureTree`` otherwise.
+#
+# .. variable:: CPACK_WIX_UI_BANNER
+#
+#  The bitmap will appear at the top of all installer pages other than the
+#  welcome and completion dialogs.
+#
+#  If set, this image will replace the default banner image.
+#
+#  This image must be 493 by 58 pixels.
+#
+# .. variable:: CPACK_WIX_UI_DIALOG
+#
+#  Background bitmap used on the welcome and completion dialogs.
+#
+#  If this variable is set, the installer will replace the default dialog
+#  image.
+#
+#  This image must be 493 by 312 pixels.
+#
+# .. variable:: CPACK_WIX_PROGRAM_MENU_FOLDER
+#
+#  Start menu folder name for launcher.
+#
+#  If this variable is not set, it will be initialized with CPACK_PACKAGE_NAME
+#
+# .. variable:: CPACK_WIX_CULTURES
+#
+#  Language(s) of the installer
+#
+#  Languages are compiled into the WixUI extension library.  To use them,
+#  simply provide the name of the culture.  If you specify more than one
+#  culture identifier in a comma or semicolon delimited list, the first one
+#  that is found will be used.  You can find a list of supported languages at:
+#  http://wix.sourceforge.net/manual-wix3/WixUI_localization.htm
+#
+# .. variable:: CPACK_WIX_TEMPLATE
+#
+#  Template file for WiX generation
+#
+#  If this variable is set, the specified template will be used to generate
+#  the WiX wxs file.  This should be used if further customization of the
+#  output is required.
+#
+#  If this variable is not set, the default MSI template included with CMake
+#  will be used.
+#
+# .. variable:: CPACK_WIX_PATCH_FILE
+#
+#  Optional list of XML files with fragments to be inserted into
+#  generated WiX sources
+#
+#  This optional variable can be used to specify an XML file that the
+#  WiX generator will use to inject fragments into its generated
+#  source files.
+#
+#  Patch files understood by the CPack WiX generator
+#  roughly follow this RELAX NG compact schema:
+#
+#  .. code-block:: none
+#
+#     start = CPackWiXPatch
+#
+#     CPackWiXPatch = element CPackWiXPatch { CPackWiXFragment* }
+#
+#     CPackWiXFragment = element CPackWiXFragment
+#     {
+#         attribute Id { string },
+#         fragmentContent*
+#     }
+#
+#     fragmentContent = element * - CPackWiXFragment
+#     {
+#         (attribute * { text } | text | fragmentContent)*
+#     }
+#
+#  Currently fragments can be injected into most
+#  Component, File and Directory elements.
+#
+#  The following additional special Ids can be used:
+#
+#  * ``#PRODUCT`` for the ``<Product>`` element.
+#  * ``#PRODUCTFEATURE`` for the root ``<Feature>`` element.
+#
+#  The following example illustrates how this works.
+#
+#  Given that the WiX generator creates the following XML element:
+#
+#  .. code-block:: xml
+#
+#     <Component Id="CM_CP_applications.bin.my_libapp.exe" Guid="*"/>
+#
+#  The following XML patch file may be used to inject an Environment element
+#  into it:
+#
+#  .. code-block:: xml
+#
+#     <CPackWiXPatch>
+#       <CPackWiXFragment Id="CM_CP_applications.bin.my_libapp.exe">
+#         <Environment Id="MyEnvironment" Action="set"
+#           Name="MyVariableName" Value="MyVariableValue"/>
+#       </CPackWiXFragment>
+#     </CPackWiXPatch>
+#
+# .. variable:: CPACK_WIX_EXTRA_SOURCES
+#
+#  Extra WiX source files
+#
+#  This variable provides an optional list of extra WiX source files (.wxs)
+#  that should be compiled and linked.  The full path to source files is
+#  required.
+#
+# .. variable:: CPACK_WIX_EXTRA_OBJECTS
+#
+#  Extra WiX object files or libraries
+#
+#  This variable provides an optional list of extra WiX object (.wixobj)
+#  and/or WiX library (.wixlib) files.  The full path to objects and libraries
+#  is required.
+#
+# .. variable:: CPACK_WIX_EXTENSIONS
+#
+#  This variable provides a list of additional extensions for the WiX
+#  tools light and candle.
+#
+# .. variable:: CPACK_WIX_<TOOL>_EXTENSIONS
+#
+#  This is the tool specific version of CPACK_WIX_EXTENSIONS.
+#  ``<TOOL>`` can be either LIGHT or CANDLE.
+#
+# .. variable:: CPACK_WIX_<TOOL>_EXTRA_FLAGS
+#
+#  This list variable allows you to pass additional
+#  flags to the WiX tool ``<TOOL>``.
+#
+#  Use it at your own risk.
+#  Future versions of CPack may generate flags which may be in conflict
+#  with your own flags.
+#
+#  ``<TOOL>`` can be either LIGHT or CANDLE.
+#
+# .. variable:: CPACK_WIX_CMAKE_PACKAGE_REGISTRY
+#
+#  If this variable is set the generated installer will create
+#  an entry in the windows registry key
+#  ``HKEY_LOCAL_MACHINE\Software\Kitware\CMake\Packages\<package>``
+#  The value for ``<package>`` is provided by this variable.
+#
+#  Assuming you also install a CMake configuration file this will
+#  allow other CMake projects to find your package with
+#  the :command:`find_package` command.
+#
+# .. variable:: CPACK_WIX_PROPERTY_<PROPERTY>
+#
+#  This variable can be used to provide a value for
+#  the Windows Installer property ``<PROPERTY>``
+#
+#  The following list contains some example properties that can be used to
+#  customize information under
+#  "Programs and Features" (also known as "Add or Remove Programs")
+#
+#  * ARPCOMMENTS - Comments
+#  * ARPHELPLINK - Help and support information URL
+#  * ARPURLINFOABOUT - General information URL
+#  * ARPURLUPDATEINFO - Update information URL
+#  * ARPHELPTELEPHONE - Help and support telephone number
+#  * ARPSIZE - Size (in kilobytes) of the application
+
+#=============================================================================
+# Copyright 2014-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(NOT CPACK_WIX_ROOT)
+  file(TO_CMAKE_PATH "$ENV{WIX}" CPACK_WIX_ROOT)
+endif()
+
+find_program(CPACK_WIX_CANDLE_EXECUTABLE candle
+  PATHS "${CPACK_WIX_ROOT}" PATH_SUFFIXES "bin")
+
+if(NOT CPACK_WIX_CANDLE_EXECUTABLE)
+  message(FATAL_ERROR "Could not find the WiX candle executable.")
+endif()
+
+find_program(CPACK_WIX_LIGHT_EXECUTABLE light
+  PATHS "${CPACK_WIX_ROOT}" PATH_SUFFIXES "bin")
+
+if(NOT CPACK_WIX_LIGHT_EXECUTABLE)
+  message(FATAL_ERROR "Could not find the WiX light executable.")
+endif()
diff --git a/share/cmake-3.2/Modules/CPackZIP.cmake b/share/cmake-3.6/Modules/CPackZIP.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CPackZIP.cmake
rename to share/cmake-3.6/Modules/CPackZIP.cmake
diff --git a/share/cmake-3.6/Modules/CTest.cmake b/share/cmake-3.6/Modules/CTest.cmake
new file mode 100644
index 0000000..a27eb4b
--- /dev/null
+++ b/share/cmake-3.6/Modules/CTest.cmake
@@ -0,0 +1,281 @@
+#[=======================================================================[.rst:
+CTest
+-----
+
+Configure a project for testing with CTest/CDash
+
+Include this module in the top CMakeLists.txt file of a project to
+enable testing with CTest and dashboard submissions to CDash::
+
+  project(MyProject)
+  ...
+  include(CTest)
+
+The module automatically creates a ``BUILD_TESTING`` option that selects
+whether to enable testing support (``ON`` by default).  After including
+the module, use code like::
+
+  if(BUILD_TESTING)
+    # ... CMake code to create tests ...
+  endif()
+
+to creating tests when testing is enabled.
+
+To enable submissions to a CDash server, create a ``CTestConfig.cmake``
+file at the top of the project with content such as::
+
+  set(CTEST_PROJECT_NAME "MyProject")
+  set(CTEST_NIGHTLY_START_TIME "01:00:00 UTC")
+  set(CTEST_DROP_METHOD "http")
+  set(CTEST_DROP_SITE "my.cdash.org")
+  set(CTEST_DROP_LOCATION "/submit.php?project=MyProject")
+  set(CTEST_DROP_SITE_CDASH TRUE)
+
+(the CDash server can provide the file to a project administrator who
+configures ``MyProject``).  Settings in the config file are shared by
+both this ``CTest`` module and the :manual:`ctest(1)` command-line
+:ref:`Dashboard Client` mode (``ctest -S``).
+
+While building a project for submission to CDash, CTest scans the
+build output for errors and warnings and reports them with surrounding
+context from the build log.  This generic approach works for all build
+tools, but does not give details about the command invocation that
+produced a given problem.  One may get more detailed reports by setting
+the :variable:`CTEST_USE_LAUNCHERS` variable::
+
+  set(CTEST_USE_LAUNCHERS 1)
+
+in the ``CTestConfig.cmake`` file.
+#]=======================================================================]
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+option(BUILD_TESTING "Build the testing tree." ON)
+
+# function to turn generator name into a version string
+# like vs7 vs71 vs8 vs9
+function(GET_VS_VERSION_STRING generator var)
+  string(REGEX REPLACE "Visual Studio ([0-9][0-9]?)($|.*)" "\\1"
+    NUMBER "${generator}")
+  if("${generator}" MATCHES "Visual Studio 7 .NET 2003")
+    set(ver_string "vs71")
+  else()
+    set(ver_string "vs${NUMBER}")
+  endif()
+  set(${var} ${ver_string} PARENT_SCOPE)
+endfunction()
+
+include(CTestUseLaunchers)
+
+if(BUILD_TESTING)
+  # Setup some auxilary macros
+  macro(SET_IF_NOT_SET var val)
+    if(NOT DEFINED "${var}")
+      set("${var}" "${val}")
+    endif()
+  endmacro()
+
+  macro(SET_IF_SET var val)
+    if(NOT "${val}" STREQUAL "")
+      set("${var}" "${val}")
+    endif()
+  endmacro()
+
+  macro(SET_IF_SET_AND_NOT_SET var val)
+    if(NOT "${val}" STREQUAL "")
+      SET_IF_NOT_SET("${var}" "${val}")
+    endif()
+  endmacro()
+
+  # Make sure testing is enabled
+  enable_testing()
+
+  if(EXISTS "${PROJECT_SOURCE_DIR}/CTestConfig.cmake")
+    include("${PROJECT_SOURCE_DIR}/CTestConfig.cmake")
+    SET_IF_SET_AND_NOT_SET(NIGHTLY_START_TIME "${CTEST_NIGHTLY_START_TIME}")
+    SET_IF_SET_AND_NOT_SET(DROP_METHOD "${CTEST_DROP_METHOD}")
+    SET_IF_SET_AND_NOT_SET(DROP_SITE "${CTEST_DROP_SITE}")
+    SET_IF_SET_AND_NOT_SET(DROP_SITE_USER "${CTEST_DROP_SITE_USER}")
+    SET_IF_SET_AND_NOT_SET(DROP_SITE_PASSWORD "${CTEST_DROP_SITE_PASWORD}")
+    SET_IF_SET_AND_NOT_SET(DROP_SITE_MODE "${CTEST_DROP_SITE_MODE}")
+    SET_IF_SET_AND_NOT_SET(DROP_LOCATION "${CTEST_DROP_LOCATION}")
+    SET_IF_SET_AND_NOT_SET(TRIGGER_SITE "${CTEST_TRIGGER_SITE}")
+    SET_IF_SET_AND_NOT_SET(UPDATE_TYPE "${CTEST_UPDATE_TYPE}")
+  endif()
+
+  # the project can have a DartConfig.cmake file
+  if(EXISTS "${PROJECT_SOURCE_DIR}/DartConfig.cmake")
+    include("${PROJECT_SOURCE_DIR}/DartConfig.cmake")
+  else()
+    # Dashboard is opened for submissions for a 24 hour period starting at
+    # the specified NIGHTLY_START_TIME. Time is specified in 24 hour format.
+    SET_IF_NOT_SET (NIGHTLY_START_TIME "00:00:00 EDT")
+    SET_IF_NOT_SET(DROP_METHOD "http")
+    SET_IF_NOT_SET (COMPRESS_SUBMISSION ON)
+  endif()
+  SET_IF_NOT_SET (NIGHTLY_START_TIME "00:00:00 EDT")
+
+  find_program(CVSCOMMAND cvs )
+  set(CVS_UPDATE_OPTIONS "-d -A -P" CACHE STRING
+    "Options passed to the cvs update command.")
+  find_program(SVNCOMMAND svn)
+  find_program(BZRCOMMAND bzr)
+  find_program(HGCOMMAND hg)
+  find_program(GITCOMMAND git)
+  find_program(P4COMMAND p4)
+
+  if(NOT UPDATE_TYPE)
+    if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/CVS")
+      set(UPDATE_TYPE cvs)
+    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.svn")
+      set(UPDATE_TYPE svn)
+    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.bzr")
+      set(UPDATE_TYPE bzr)
+    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.hg")
+      set(UPDATE_TYPE hg)
+    elseif(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/.git")
+      set(UPDATE_TYPE git)
+    endif()
+  endif()
+
+  string(TOLOWER "${UPDATE_TYPE}" _update_type)
+  if("${_update_type}" STREQUAL "cvs")
+    set(UPDATE_COMMAND "${CVSCOMMAND}")
+    set(UPDATE_OPTIONS "${CVS_UPDATE_OPTIONS}")
+  elseif("${_update_type}" STREQUAL "svn")
+    set(UPDATE_COMMAND "${SVNCOMMAND}")
+    set(UPDATE_OPTIONS "${SVN_UPDATE_OPTIONS}")
+  elseif("${_update_type}" STREQUAL "bzr")
+    set(UPDATE_COMMAND "${BZRCOMMAND}")
+    set(UPDATE_OPTIONS "${BZR_UPDATE_OPTIONS}")
+  elseif("${_update_type}" STREQUAL "hg")
+    set(UPDATE_COMMAND "${HGCOMMAND}")
+    set(UPDATE_OPTIONS "${HG_UPDATE_OPTIONS}")
+  elseif("${_update_type}" STREQUAL "git")
+    set(UPDATE_COMMAND "${GITCOMMAND}")
+    set(UPDATE_OPTIONS "${GIT_UPDATE_OPTIONS}")
+  elseif("${_update_type}" STREQUAL "p4")
+    set(UPDATE_COMMAND "${P4COMMAND}")
+    set(UPDATE_OPTIONS "${P4_UPDATE_OPTIONS}")
+  endif()
+
+  set(DART_TESTING_TIMEOUT 1500 CACHE STRING
+    "Maximum time allowed before CTest will kill the test.")
+
+  set(CTEST_SUBMIT_RETRY_DELAY 5 CACHE STRING
+    "How long to wait between timed-out CTest submissions.")
+  set(CTEST_SUBMIT_RETRY_COUNT 3 CACHE STRING
+    "How many times to retry timed-out CTest submissions.")
+
+  find_program(MEMORYCHECK_COMMAND
+    NAMES purify valgrind boundscheck
+    PATHS
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Rational Software\\Purify\\Setup;InstallFolder]"
+    DOC "Path to the memory checking command, used for memory error detection."
+    )
+  find_program(SLURM_SBATCH_COMMAND sbatch DOC
+    "Path to the SLURM sbatch executable"
+    )
+  find_program(SLURM_SRUN_COMMAND srun DOC
+    "Path to the SLURM srun executable"
+    )
+  set(MEMORYCHECK_SUPPRESSIONS_FILE "" CACHE FILEPATH
+    "File that contains suppressions for the memory checker")
+  find_program(SCPCOMMAND scp DOC
+    "Path to scp command, used by CTest for submitting results to a Dart server"
+    )
+  find_program(COVERAGE_COMMAND gcov DOC
+    "Path to the coverage program that CTest uses for performing coverage inspection"
+    )
+  set(COVERAGE_EXTRA_FLAGS "-l" CACHE STRING
+    "Extra command line flags to pass to the coverage tool")
+
+  # set the site name
+  site_name(SITE)
+  # set the build name
+  if(NOT BUILDNAME)
+    set(DART_COMPILER "${CMAKE_CXX_COMPILER}")
+    if(NOT DART_COMPILER)
+      set(DART_COMPILER "${CMAKE_C_COMPILER}")
+    endif()
+    if(NOT DART_COMPILER)
+      set(DART_COMPILER "unknown")
+    endif()
+    if(WIN32)
+      set(DART_NAME_COMPONENT "NAME_WE")
+    else()
+      set(DART_NAME_COMPONENT "NAME")
+    endif()
+    if(NOT BUILD_NAME_SYSTEM_NAME)
+      set(BUILD_NAME_SYSTEM_NAME "${CMAKE_SYSTEM_NAME}")
+    endif()
+    if(WIN32)
+      set(BUILD_NAME_SYSTEM_NAME "Win32")
+    endif()
+    if(UNIX OR BORLAND)
+      get_filename_component(DART_CXX_NAME
+        "${CMAKE_CXX_COMPILER}" ${DART_NAME_COMPONENT})
+    else()
+      get_filename_component(DART_CXX_NAME
+        "${CMAKE_MAKE_PROGRAM}" ${DART_NAME_COMPONENT})
+    endif()
+    if(DART_CXX_NAME MATCHES "devenv")
+      GET_VS_VERSION_STRING("${CMAKE_GENERATOR}" DART_CXX_NAME)
+    endif()
+    set(BUILDNAME "${BUILD_NAME_SYSTEM_NAME}-${DART_CXX_NAME}")
+  endif()
+
+  # the build command
+  build_command(MAKECOMMAND_DEFAULT_VALUE
+    CONFIGURATION "\${CTEST_CONFIGURATION_TYPE}")
+  set(MAKECOMMAND ${MAKECOMMAND_DEFAULT_VALUE}
+    CACHE STRING "Command to build the project")
+
+  # the default build configuration the ctest build handler will use
+  # if there is no -C arg given to ctest:
+  set(DEFAULT_CTEST_CONFIGURATION_TYPE "$ENV{CMAKE_CONFIG_TYPE}")
+  if(DEFAULT_CTEST_CONFIGURATION_TYPE STREQUAL "")
+    set(DEFAULT_CTEST_CONFIGURATION_TYPE "Release")
+  endif()
+
+  mark_as_advanced(
+    BZRCOMMAND
+    BZR_UPDATE_OPTIONS
+    COVERAGE_COMMAND
+    COVERAGE_EXTRA_FLAGS
+    CTEST_SUBMIT_RETRY_DELAY
+    CTEST_SUBMIT_RETRY_COUNT
+    CVSCOMMAND
+    CVS_UPDATE_OPTIONS
+    DART_TESTING_TIMEOUT
+    GITCOMMAND
+    P4COMMAND
+    HGCOMMAND
+    MAKECOMMAND
+    MEMORYCHECK_COMMAND
+    MEMORYCHECK_SUPPRESSIONS_FILE
+    PURIFYCOMMAND
+    SCPCOMMAND
+    SLURM_SBATCH_COMMAND
+    SLURM_SRUN_COMMAND
+    SITE
+    SVNCOMMAND
+    SVN_UPDATE_OPTIONS
+    )
+  if(NOT RUN_FROM_DART)
+    set(RUN_FROM_CTEST_OR_DART 1)
+    include(CTestTargets)
+    set(RUN_FROM_CTEST_OR_DART)
+  endif()
+endif()
diff --git a/share/cmake-3.6/Modules/CTestCoverageCollectGCOV.cmake b/share/cmake-3.6/Modules/CTestCoverageCollectGCOV.cmake
new file mode 100644
index 0000000..a04d340
--- /dev/null
+++ b/share/cmake-3.6/Modules/CTestCoverageCollectGCOV.cmake
@@ -0,0 +1,300 @@
+#.rst:
+# CTestCoverageCollectGCOV
+# ------------------------
+#
+# This module provides the ``ctest_coverage_collect_gcov`` function.
+#
+# This function runs gcov on all .gcda files found in the binary tree
+# and packages the resulting .gcov files into a tar file.
+# This tarball also contains the following:
+#
+# * *data.json* defines the source and build directories for use by CDash.
+# * *Labels.json* indicates any :prop_sf:`LABELS` that have been set on the
+#   source files.
+# * The *uncovered* directory holds any uncovered files found by
+#   :variable:`CTEST_EXTRA_COVERAGE_GLOB`.
+#
+# After generating this tar file, it can be sent to CDash for display with the
+# :command:`ctest_submit(CDASH_UPLOAD)` command.
+#
+# .. command:: cdash_coverage_collect_gcov
+#
+#   ::
+#
+#     ctest_coverage_collect_gcov(TARBALL <tarfile>
+#       [SOURCE <source_dir>][BUILD <build_dir>]
+#       [GCOV_COMMAND <gcov_command>]
+#       [GCOV_OPTIONS <options>...]
+#       )
+#
+#   Run gcov and package a tar file for CDash.  The options are:
+#
+#   ``TARBALL <tarfile>``
+#     Specify the location of the ``.tar`` file to be created for later
+#     upload to CDash.  Relative paths will be interpreted with respect
+#     to the top-level build directory.
+#
+#   ``SOURCE <source_dir>``
+#     Specify the top-level source directory for the build.
+#     Default is the value of :variable:`CTEST_SOURCE_DIRECTORY`.
+#
+#   ``BUILD <build_dir>``
+#     Specify the top-level build directory for the build.
+#     Default is the value of :variable:`CTEST_BINARY_DIRECTORY`.
+#
+#   ``GCOV_COMMAND <gcov_command>``
+#     Specify the full path to the ``gcov`` command on the machine.
+#     Default is the value of :variable:`CTEST_COVERAGE_COMMAND`.
+#
+#   ``GCOV_OPTIONS <options>...``
+#     Specify options to be passed to gcov.  The ``gcov`` command
+#     is run as ``gcov <options>... -o <gcov-dir> <file>.gcda``.
+#     If not specified, the default option is just ``-b``.
+#
+#   ``GLOB``
+#     Recursively search for .gcda files in build_dir rather than
+#     determining search locations by reading TargetDirectories.txt.
+#
+#   ``DELETE``
+#     Delete coverage files after they've been packaged into the .tar.
+#
+#   ``QUIET``
+#     Suppress non-error messages that otherwise would have been
+#     printed out by this function.
+
+#=============================================================================
+# Copyright 2014-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+include(CMakeParseArguments)
+function(ctest_coverage_collect_gcov)
+  set(options QUIET GLOB DELETE)
+  set(oneValueArgs TARBALL SOURCE BUILD GCOV_COMMAND)
+  set(multiValueArgs GCOV_OPTIONS)
+  cmake_parse_arguments(GCOV  "${options}" "${oneValueArgs}"
+    "${multiValueArgs}" "" ${ARGN} )
+  if(NOT DEFINED GCOV_TARBALL)
+    message(FATAL_ERROR
+      "TARBALL must be specified. for ctest_coverage_collect_gcov")
+  endif()
+  if(NOT DEFINED GCOV_SOURCE)
+    set(source_dir "${CTEST_SOURCE_DIRECTORY}")
+  else()
+    set(source_dir "${GCOV_SOURCE}")
+  endif()
+  if(NOT DEFINED GCOV_BUILD)
+    set(binary_dir "${CTEST_BINARY_DIRECTORY}")
+  else()
+    set(binary_dir "${GCOV_BUILD}")
+  endif()
+  if(NOT DEFINED GCOV_GCOV_COMMAND)
+    set(gcov_command "${CTEST_COVERAGE_COMMAND}")
+  else()
+    set(gcov_command "${GCOV_GCOV_COMMAND}")
+  endif()
+  # run gcov on each gcda file in the binary tree
+  set(gcda_files)
+  set(label_files)
+  if (GCOV_GLOB)
+      file(GLOB_RECURSE gfiles RELATIVE ${binary_dir} "${binary_dir}/*.gcda")
+      list(LENGTH gfiles len)
+      # if we have gcda files then also grab the labels file for that target
+      if(${len} GREATER 0)
+        file(GLOB_RECURSE lfiles RELATIVE ${binary_dir} "${binary_dir}/Labels.json")
+        list(APPEND gcda_files ${gfiles})
+        list(APPEND label_files ${lfiles})
+      endif()
+  else()
+    # look for gcda files in the target directories
+    # this will be faster and only look where the files will be
+    file(STRINGS "${binary_dir}/CMakeFiles/TargetDirectories.txt" target_dirs
+         ENCODING UTF-8)
+    foreach(target_dir ${target_dirs})
+      file(GLOB_RECURSE gfiles RELATIVE ${binary_dir} "${target_dir}/*.gcda")
+      list(LENGTH gfiles len)
+      # if we have gcda files then also grab the labels file for that target
+      if(${len} GREATER 0)
+        file(GLOB_RECURSE lfiles RELATIVE ${binary_dir}
+          "${target_dir}/Labels.json")
+        list(APPEND gcda_files ${gfiles})
+        list(APPEND label_files ${lfiles})
+      endif()
+    endforeach()
+  endif()
+  # return early if no coverage files were found
+  list(LENGTH gcda_files len)
+  if(len EQUAL 0)
+    if (NOT GCOV_QUIET)
+      message("ctest_coverage_collect_gcov: No .gcda files found, "
+        "ignoring coverage request.")
+    endif()
+    return()
+  endif()
+  # setup the dir for the coverage files
+  set(coverage_dir "${binary_dir}/Testing/CoverageInfo")
+  file(MAKE_DIRECTORY  "${coverage_dir}")
+  # call gcov on each .gcda file
+  foreach (gcda_file ${gcda_files})
+    # get the directory of the gcda file
+    get_filename_component(gcda_file ${binary_dir}/${gcda_file} ABSOLUTE)
+    get_filename_component(gcov_dir ${gcda_file} DIRECTORY)
+    # run gcov, this will produce the .gcov file in the current
+    # working directory
+    if(NOT DEFINED GCOV_GCOV_OPTIONS)
+      set(GCOV_GCOV_OPTIONS -b)
+    endif()
+    execute_process(COMMAND
+      ${gcov_command} ${GCOV_GCOV_OPTIONS} -o ${gcov_dir} ${gcda_file}
+      OUTPUT_VARIABLE out
+      RESULT_VARIABLE res
+      WORKING_DIRECTORY ${coverage_dir})
+
+    if (GCOV_DELETE)
+      file(REMOVE ${gcda_file})
+    endif()
+
+  endforeach()
+  if(NOT "${res}" EQUAL 0)
+    if (NOT GCOV_QUIET)
+      message(STATUS "Error running gcov: ${res} ${out}")
+    endif()
+  endif()
+  # create json file with project information
+  file(WRITE ${coverage_dir}/data.json
+    "{
+    \"Source\": \"${source_dir}\",
+    \"Binary\": \"${binary_dir}\"
+}")
+  # collect the gcov files
+  set(unfiltered_gcov_files)
+  file(GLOB_RECURSE unfiltered_gcov_files RELATIVE ${binary_dir} "${coverage_dir}/*.gcov")
+
+  # if CTEST_EXTRA_COVERAGE_GLOB was specified we search for files
+  # that might be uncovered
+  if (DEFINED CTEST_EXTRA_COVERAGE_GLOB)
+    set(uncovered_files)
+    foreach(search_entry IN LISTS CTEST_EXTRA_COVERAGE_GLOB)
+      if(NOT GCOV_QUIET)
+        message("Add coverage glob: ${search_entry}")
+      endif()
+      file(GLOB_RECURSE matching_files "${source_dir}/${search_entry}")
+      if (matching_files)
+        list(APPEND uncovered_files "${matching_files}")
+      endif()
+    endforeach()
+  endif()
+
+  set(gcov_files)
+  foreach(gcov_file ${unfiltered_gcov_files})
+    file(STRINGS ${binary_dir}/${gcov_file} first_line LIMIT_COUNT 1 ENCODING UTF-8)
+
+    set(is_excluded false)
+    if(first_line MATCHES "^        -:    0:Source:(.*)$")
+      set(source_file ${CMAKE_MATCH_1})
+    elseif(NOT GCOV_QUIET)
+      message(STATUS "Could not determine source file corresponding to: ${gcov_file}")
+    endif()
+
+    foreach(exclude_entry IN LISTS CTEST_CUSTOM_COVERAGE_EXCLUDE)
+      if(source_file MATCHES "${exclude_entry}")
+        set(is_excluded true)
+
+        if(NOT GCOV_QUIET)
+          message("Excluding coverage for: ${source_file} which matches ${exclude_entry}")
+        endif()
+
+        break()
+      endif()
+    endforeach()
+
+    get_filename_component(resolved_source_file "${source_file}" ABSOLUTE)
+    foreach(uncovered_file IN LISTS uncovered_files)
+      get_filename_component(resolved_uncovered_file "${uncovered_file}" ABSOLUTE)
+      if (resolved_uncovered_file STREQUAL resolved_source_file)
+        list(REMOVE_ITEM uncovered_files "${uncovered_file}")
+      endif()
+    endforeach()
+
+    if(NOT is_excluded)
+      list(APPEND gcov_files ${gcov_file})
+    endif()
+  endforeach()
+
+  foreach (uncovered_file ${uncovered_files})
+    # Check if this uncovered file should be excluded.
+    set(is_excluded false)
+    foreach(exclude_entry IN LISTS CTEST_CUSTOM_COVERAGE_EXCLUDE)
+      if(uncovered_file MATCHES "${exclude_entry}")
+        set(is_excluded true)
+        if(NOT GCOV_QUIET)
+          message("Excluding coverage for: ${uncovered_file} which matches ${exclude_entry}")
+        endif()
+        break()
+      endif()
+    endforeach()
+    if(is_excluded)
+      continue()
+    endif()
+
+    # Copy from source to binary dir, preserving any intermediate subdirectories.
+    get_filename_component(filename "${uncovered_file}" NAME)
+    get_filename_component(relative_path "${uncovered_file}" DIRECTORY)
+    string(REPLACE "${source_dir}" "" relative_path "${relative_path}")
+    if (relative_path)
+      # Strip leading slash.
+      string(SUBSTRING "${relative_path}" 1 -1 relative_path)
+    endif()
+    file(COPY ${uncovered_file} DESTINATION ${binary_dir}/uncovered/${relative_path})
+    if(relative_path)
+      list(APPEND uncovered_files_for_tar uncovered/${relative_path}/${filename})
+    else()
+      list(APPEND uncovered_files_for_tar uncovered/${filename})
+    endif()
+  endforeach()
+
+  # tar up the coverage info with the same date so that the md5
+  # sum will be the same for the tar file independent of file time
+  # stamps
+  string(REPLACE ";" "\n" gcov_files "${gcov_files}")
+  string(REPLACE ";" "\n" label_files "${label_files}")
+  string(REPLACE ";" "\n" uncovered_files_for_tar "${uncovered_files_for_tar}")
+  file(WRITE "${coverage_dir}/coverage_file_list.txt"
+    "${gcov_files}
+${coverage_dir}/data.json
+${label_files}
+${uncovered_files_for_tar}
+")
+
+  if (GCOV_QUIET)
+    set(tar_opts "cfj")
+  else()
+    set(tar_opts "cvfj")
+  endif()
+
+  execute_process(COMMAND
+    ${CMAKE_COMMAND} -E tar ${tar_opts} ${GCOV_TARBALL}
+    "--mtime=1970-01-01 0:0:0 UTC"
+    "--format=gnutar"
+    --files-from=${coverage_dir}/coverage_file_list.txt
+    WORKING_DIRECTORY ${binary_dir})
+
+  if (GCOV_DELETE)
+    foreach(gcov_file ${unfiltered_gcov_files})
+      file(REMOVE ${binary_dir}/${gcov_file})
+    endforeach()
+    file(REMOVE ${coverage_dir}/coverage_file_list.txt)
+    file(REMOVE ${coverage_dir}/data.json)
+    if (EXISTS ${binary_dir}/uncovered)
+      file(REMOVE ${binary_dir}/uncovered)
+    endif()
+  endif()
+
+endfunction()
diff --git a/share/cmake-3.2/Modules/CTestScriptMode.cmake b/share/cmake-3.6/Modules/CTestScriptMode.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CTestScriptMode.cmake
rename to share/cmake-3.6/Modules/CTestScriptMode.cmake
diff --git a/share/cmake-3.2/Modules/CTestTargets.cmake b/share/cmake-3.6/Modules/CTestTargets.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CTestTargets.cmake
rename to share/cmake-3.6/Modules/CTestTargets.cmake
diff --git a/share/cmake-3.2/Modules/CTestUseLaunchers.cmake b/share/cmake-3.6/Modules/CTestUseLaunchers.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CTestUseLaunchers.cmake
rename to share/cmake-3.6/Modules/CTestUseLaunchers.cmake
diff --git a/share/cmake-3.2/Modules/CheckCCompilerFlag.cmake b/share/cmake-3.6/Modules/CheckCCompilerFlag.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckCCompilerFlag.cmake
rename to share/cmake-3.6/Modules/CheckCCompilerFlag.cmake
diff --git a/share/cmake-3.6/Modules/CheckCSourceCompiles.cmake b/share/cmake-3.6/Modules/CheckCSourceCompiles.cmake
new file mode 100644
index 0000000..c2b1723
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckCSourceCompiles.cmake
@@ -0,0 +1,111 @@
+#.rst:
+# CheckCSourceCompiles
+# --------------------
+#
+# Check if given C source compiles and links into an executable
+#
+# CHECK_C_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
+#
+# ::
+#
+#   <code>       - source code to try to compile, must define 'main'
+#   <var>        - variable to store whether the source code compiled
+#                  Will be created as an internal cache variable.
+#   <fail-regex> - fail if test output matches this regex
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+
+macro(CHECK_C_SOURCE_COMPILES SOURCE VAR)
+  if(NOT DEFINED "${VAR}")
+    set(_FAIL_REGEX)
+    set(_key)
+    foreach(arg ${ARGN})
+      if("${arg}" MATCHES "^(FAIL_REGEX)$")
+        set(_key "${arg}")
+      elseif(_key)
+        list(APPEND _${_key} "${arg}")
+      else()
+        message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
+      endif()
+    endforeach()
+    set(MACRO_CHECK_FUNCTION_DEFINITIONS
+      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES)
+    endif()
+    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c"
+      "${SOURCE}\n")
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Performing Test ${VAR}")
+    endif()
+    try_compile(${VAR}
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES}
+      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
+      "${CHECK_C_SOURCE_COMPILES_ADD_INCLUDES}"
+      OUTPUT_VARIABLE OUTPUT)
+
+    foreach(_regex ${_FAIL_REGEX})
+      if("${OUTPUT}" MATCHES "${_regex}")
+        set(${VAR} 0)
+      endif()
+    endforeach()
+
+    if(${VAR})
+      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Success")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Performing C SOURCE FILE Test ${VAR} succeeded with the following output:\n"
+        "${OUTPUT}\n"
+        "Source file was:\n${SOURCE}\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Failed")
+      endif()
+      set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Performing C SOURCE FILE Test ${VAR} failed with the following output:\n"
+        "${OUTPUT}\n"
+        "Source file was:\n${SOURCE}\n")
+    endif()
+  endif()
+endmacro()
+
diff --git a/share/cmake-3.6/Modules/CheckCSourceRuns.cmake b/share/cmake-3.6/Modules/CheckCSourceRuns.cmake
new file mode 100644
index 0000000..5afeab6
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckCSourceRuns.cmake
@@ -0,0 +1,107 @@
+#.rst:
+# CheckCSourceRuns
+# ----------------
+#
+# Check if the given C source code compiles and runs.
+#
+# CHECK_C_SOURCE_RUNS(<code> <var>)
+#
+# ::
+#
+#   <code>   - source code to try to compile
+#   <var>    - variable to store the result
+#              (1 for success, empty for failure)
+#              Will be created as an internal cache variable.
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+
+macro(CHECK_C_SOURCE_RUNS SOURCE VAR)
+  if(NOT DEFINED "${VAR}")
+    set(MACRO_CHECK_FUNCTION_DEFINITIONS
+      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_C_SOURCE_COMPILES_ADD_INCLUDES)
+    endif()
+    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c"
+      "${SOURCE}\n")
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Performing Test ${VAR}")
+    endif()
+    try_run(${VAR}_EXITCODE ${VAR}_COMPILED
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.c
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_C_SOURCE_COMPILES_ADD_LIBRARIES}
+      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
+      -DCMAKE_SKIP_RPATH:BOOL=${CMAKE_SKIP_RPATH}
+      "${CHECK_C_SOURCE_COMPILES_ADD_INCLUDES}"
+      COMPILE_OUTPUT_VARIABLE OUTPUT)
+    # if it did not compile make the return value fail code of 1
+    if(NOT ${VAR}_COMPILED)
+      set(${VAR}_EXITCODE 1)
+    endif()
+    # if the return value was 0 then it worked
+    if("${${VAR}_EXITCODE}" EQUAL 0)
+      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Success")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Performing C SOURCE FILE Test ${VAR} succeeded with the following output:\n"
+        "${OUTPUT}\n"
+        "Return value: ${${VAR}}\n"
+        "Source file was:\n${SOURCE}\n")
+    else()
+      if(CMAKE_CROSSCOMPILING AND "${${VAR}_EXITCODE}" MATCHES  "FAILED_TO_RUN")
+        set(${VAR} "${${VAR}_EXITCODE}")
+      else()
+        set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
+      endif()
+
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Failed")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Performing C SOURCE FILE Test ${VAR} failed with the following output:\n"
+        "${OUTPUT}\n"
+        "Return value: ${${VAR}_EXITCODE}\n"
+        "Source file was:\n${SOURCE}\n")
+
+    endif()
+  endif()
+endmacro()
+
diff --git a/share/cmake-3.2/Modules/CheckCXXCompilerFlag.cmake b/share/cmake-3.6/Modules/CheckCXXCompilerFlag.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckCXXCompilerFlag.cmake
rename to share/cmake-3.6/Modules/CheckCXXCompilerFlag.cmake
diff --git a/share/cmake-3.6/Modules/CheckCXXSourceCompiles.cmake b/share/cmake-3.6/Modules/CheckCXXSourceCompiles.cmake
new file mode 100644
index 0000000..f8736e2
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckCXXSourceCompiles.cmake
@@ -0,0 +1,112 @@
+#.rst:
+# CheckCXXSourceCompiles
+# ----------------------
+#
+# Check if given C++ source compiles and links into an executable
+#
+# CHECK_CXX_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
+#
+# ::
+#
+#   <code>       - source code to try to compile, must define 'main'
+#   <var>        - variable to store whether the source code compiled
+#                  Will be created as an internal cache variable.
+#   <fail-regex> - fail if test output matches this regex
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+
+macro(CHECK_CXX_SOURCE_COMPILES SOURCE VAR)
+  if(NOT DEFINED "${VAR}")
+    set(_FAIL_REGEX)
+    set(_key)
+    foreach(arg ${ARGN})
+      if("${arg}" MATCHES "^(FAIL_REGEX)$")
+        set(_key "${arg}")
+      elseif(_key)
+        list(APPEND _${_key} "${arg}")
+      else()
+        message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
+      endif()
+    endforeach()
+
+    set(MACRO_CHECK_FUNCTION_DEFINITIONS
+      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES)
+    endif()
+    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx"
+      "${SOURCE}\n")
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Performing Test ${VAR}")
+    endif()
+    try_compile(${VAR}
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES}
+      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
+      "${CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES}"
+      OUTPUT_VARIABLE OUTPUT)
+
+    foreach(_regex ${_FAIL_REGEX})
+      if("${OUTPUT}" MATCHES "${_regex}")
+        set(${VAR} 0)
+      endif()
+    endforeach()
+
+    if(${VAR})
+      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Success")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Performing C++ SOURCE FILE Test ${VAR} succeeded with the following output:\n"
+        "${OUTPUT}\n"
+        "Source file was:\n${SOURCE}\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Failed")
+      endif()
+      set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Performing C++ SOURCE FILE Test ${VAR} failed with the following output:\n"
+        "${OUTPUT}\n"
+        "Source file was:\n${SOURCE}\n")
+    endif()
+  endif()
+endmacro()
+
diff --git a/share/cmake-3.6/Modules/CheckCXXSourceRuns.cmake b/share/cmake-3.6/Modules/CheckCXXSourceRuns.cmake
new file mode 100644
index 0000000..84b661d
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckCXXSourceRuns.cmake
@@ -0,0 +1,107 @@
+#.rst:
+# CheckCXXSourceRuns
+# ------------------
+#
+# Check if the given C++ source code compiles and runs.
+#
+# CHECK_CXX_SOURCE_RUNS(<code> <var>)
+#
+# ::
+#
+#   <code>   - source code to try to compile
+#   <var>    - variable to store the result
+#              (1 for success, empty for failure)
+#              Will be created as an internal cache variable.
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+
+macro(CHECK_CXX_SOURCE_RUNS SOURCE VAR)
+  if(NOT DEFINED "${VAR}")
+    set(MACRO_CHECK_FUNCTION_DEFINITIONS
+      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES)
+    endif()
+    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx"
+      "${SOURCE}\n")
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Performing Test ${VAR}")
+    endif()
+    try_run(${VAR}_EXITCODE ${VAR}_COMPILED
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.cxx
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_CXX_SOURCE_COMPILES_ADD_LIBRARIES}
+      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
+      -DCMAKE_SKIP_RPATH:BOOL=${CMAKE_SKIP_RPATH}
+      "${CHECK_CXX_SOURCE_COMPILES_ADD_INCLUDES}"
+      COMPILE_OUTPUT_VARIABLE OUTPUT)
+
+    # if it did not compile make the return value fail code of 1
+    if(NOT ${VAR}_COMPILED)
+      set(${VAR}_EXITCODE 1)
+    endif()
+    # if the return value was 0 then it worked
+    if("${${VAR}_EXITCODE}" EQUAL 0)
+      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Success")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Performing C++ SOURCE FILE Test ${VAR} succeeded with the following output:\n"
+        "${OUTPUT}\n"
+        "Return value: ${${VAR}}\n"
+        "Source file was:\n${SOURCE}\n")
+    else()
+      if(CMAKE_CROSSCOMPILING AND "${${VAR}_EXITCODE}" MATCHES  "FAILED_TO_RUN")
+        set(${VAR} "${${VAR}_EXITCODE}")
+      else()
+        set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
+      endif()
+
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Failed")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Performing C++ SOURCE FILE Test ${VAR} failed with the following output:\n"
+        "${OUTPUT}\n"
+        "Return value: ${${VAR}_EXITCODE}\n"
+        "Source file was:\n${SOURCE}\n")
+    endif()
+  endif()
+endmacro()
+
diff --git a/share/cmake-3.2/Modules/CheckCXXSymbolExists.cmake b/share/cmake-3.6/Modules/CheckCXXSymbolExists.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckCXXSymbolExists.cmake
rename to share/cmake-3.6/Modules/CheckCXXSymbolExists.cmake
diff --git a/share/cmake-3.6/Modules/CheckForPthreads.c b/share/cmake-3.6/Modules/CheckForPthreads.c
new file mode 100644
index 0000000..6fc6f26
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckForPthreads.c
@@ -0,0 +1,41 @@
+#include <pthread.h>
+#include <stdio.h>
+#include <unistd.h>
+
+void* runner(void*);
+
+int res = 0;
+#ifdef __CLASSIC_C__
+int main()
+{
+  int ac;
+  char* av[];
+#else
+int main(int ac, char* av[])
+{
+#endif
+  pthread_t tid[2];
+  pthread_create(&tid[0], 0, runner, (void*)1);
+  pthread_create(&tid[1], 0, runner, (void*)2);
+
+#if defined(__BEOS__) && !defined(__ZETA__) /* (no usleep on BeOS 5.) */
+  usleep(1); /* for strange behavior on single-processor sun */
+#endif
+
+  pthread_join(tid[0], 0);
+  pthread_join(tid[1], 0);
+  if (ac > 1000) {
+    return *av[0];
+  }
+  return res;
+}
+
+void* runner(void* args)
+{
+  int cc;
+  for (cc = 0; cc < 10; cc++) {
+    printf("%p CC: %d\n", args, cc);
+  }
+  res++;
+  return 0;
+}
diff --git a/share/cmake-3.6/Modules/CheckFortranCompilerFlag.cmake b/share/cmake-3.6/Modules/CheckFortranCompilerFlag.cmake
new file mode 100644
index 0000000..53fd8d6
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckFortranCompilerFlag.cmake
@@ -0,0 +1,66 @@
+#.rst:
+# CheckFortranCompilerFlag
+# ------------------------
+#
+# Check whether the Fortran compiler supports a given flag.
+#
+# CHECK_Fortran_COMPILER_FLAG(<flag> <var>)
+#
+# ::
+#
+#   <flag> - the compiler flag
+#   <var>  - variable to store the result
+#            Will be created as an internal cache variable.
+#
+# This internally calls the check_fortran_source_compiles macro and
+# sets CMAKE_REQUIRED_DEFINITIONS to <flag>.  See help for
+# CheckFortranSourceCompiles for a listing of variables that can
+# otherwise modify the build.  The result only tells that the compiler
+# does not give an error message when it encounters the flag.  If the
+# flag has any effect or even a specific one is beyond the scope of
+# this module.
+
+#=============================================================================
+# Copyright 2015 Nicolas Bock <nicolasbock@gmail.com>
+# Copyright 2006-2011 Kitware, Inc.
+# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
+# Copyright 2011 Matthias Kretz <kretz@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(CheckFortranSourceCompiles)
+include(CMakeCheckCompilerFlagCommonPatterns)
+
+macro (CHECK_Fortran_COMPILER_FLAG _FLAG _RESULT)
+  set(SAFE_CMAKE_REQUIRED_DEFINITIONS "${CMAKE_REQUIRED_DEFINITIONS}")
+  set(CMAKE_REQUIRED_DEFINITIONS "${_FLAG}")
+
+  # Normalize locale during test compilation.
+  set(_CheckFortranCompilerFlag_LOCALE_VARS LC_ALL LC_MESSAGES LANG)
+  foreach(v ${_CheckFortranCompilerFlag_LOCALE_VARS})
+    set(_CheckFortranCompilerFlag_SAVED_${v} "$ENV{${v}}")
+    set(ENV{${v}} C)
+  endforeach()
+  CHECK_COMPILER_FLAG_COMMON_PATTERNS(_CheckFortranCompilerFlag_COMMON_PATTERNS)
+  CHECK_Fortran_SOURCE_COMPILES("       program test\n       stop\n       end program" ${_RESULT}
+    # Some compilers do not fail with a bad flag
+    FAIL_REGEX "command line option .* is valid for .* but not for Fortran" # GNU
+    ${_CheckFortranCompilerFlag_COMMON_PATTERNS}
+    )
+  foreach(v ${_CheckFortranCompilerFlag_LOCALE_VARS})
+    set(ENV{${v}} ${_CheckFortranCompilerFlag_SAVED_${v}})
+    unset(_CheckFortranCompilerFlag_SAVED_${v})
+  endforeach()
+  unset(_CheckFortranCompilerFlag_LOCALE_VARS)
+  unset(_CheckFortranCompilerFlag_COMMON_PATTERNS)
+
+  set (CMAKE_REQUIRED_DEFINITIONS "${SAFE_CMAKE_REQUIRED_DEFINITIONS}")
+endmacro ()
diff --git a/share/cmake-3.2/Modules/CheckFortranFunctionExists.cmake b/share/cmake-3.6/Modules/CheckFortranFunctionExists.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckFortranFunctionExists.cmake
rename to share/cmake-3.6/Modules/CheckFortranFunctionExists.cmake
diff --git a/share/cmake-3.6/Modules/CheckFortranSourceCompiles.cmake b/share/cmake-3.6/Modules/CheckFortranSourceCompiles.cmake
new file mode 100644
index 0000000..0bdcffa
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckFortranSourceCompiles.cmake
@@ -0,0 +1,111 @@
+#.rst:
+# CheckFortranSourceCompiles
+# --------------------------
+#
+# Check if given Fortran source compiles and links into an executable::
+#
+#   CHECK_Fortran_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
+#
+# The arguments are:
+#
+# ``<code>``
+#   Source code to try to compile.  It must define a PROGRAM entry point.
+# ``<var>``
+#   Variable to store whether the source code compiled.
+#   Will be created as an internal cache variable.
+# ``<fail-regex>``
+#   Fail if test output matches this regex.
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+
+macro(CHECK_Fortran_SOURCE_COMPILES SOURCE VAR)
+  if(NOT DEFINED "${VAR}")
+    set(_FAIL_REGEX)
+    set(_key)
+    foreach(arg ${ARGN})
+      if("${arg}" MATCHES "^(FAIL_REGEX)$")
+        set(_key "${arg}")
+      elseif(_key)
+        list(APPEND _${_key} "${arg}")
+      else()
+        message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
+      endif()
+    endforeach()
+    set(MACRO_CHECK_FUNCTION_DEFINITIONS
+      "-D${VAR} ${CMAKE_REQUIRED_FLAGS}")
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_Fortran_SOURCE_COMPILES_ADD_LIBRARIES
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_Fortran_SOURCE_COMPILES_ADD_LIBRARIES)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_Fortran_SOURCE_COMPILES_ADD_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_Fortran_SOURCE_COMPILES_ADD_INCLUDES)
+    endif()
+    file(WRITE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.F"
+      "${SOURCE}\n")
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Performing Test ${VAR}")
+    endif()
+    try_compile(${VAR}
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/src.F
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_Fortran_SOURCE_COMPILES_ADD_LIBRARIES}
+      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
+      "${CHECK_Fortran_SOURCE_COMPILES_ADD_INCLUDES}"
+      OUTPUT_VARIABLE OUTPUT)
+
+    foreach(_regex ${_FAIL_REGEX})
+      if("${OUTPUT}" MATCHES "${_regex}")
+        set(${VAR} 0)
+      endif()
+    endforeach()
+
+    if(${VAR})
+      set(${VAR} 1 CACHE INTERNAL "Test ${VAR}")
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Success")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Performing Fortran SOURCE FILE Test ${VAR} succeeded with the following output:\n"
+        "${OUTPUT}\n"
+        "Source file was:\n${SOURCE}\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Performing Test ${VAR} - Failed")
+      endif()
+      set(${VAR} "" CACHE INTERNAL "Test ${VAR}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Performing Fortran SOURCE FILE Test ${VAR} failed with the following output:\n"
+        "${OUTPUT}\n"
+        "Source file was:\n${SOURCE}\n")
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.6/Modules/CheckFunctionExists.c b/share/cmake-3.6/Modules/CheckFunctionExists.c
new file mode 100644
index 0000000..2304000
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckFunctionExists.c
@@ -0,0 +1,28 @@
+#ifdef CHECK_FUNCTION_EXISTS
+
+#ifdef __cplusplus
+extern "C"
+#endif
+  char
+  CHECK_FUNCTION_EXISTS();
+#ifdef __CLASSIC_C__
+int main()
+{
+  int ac;
+  char* av[];
+#else
+int main(int ac, char* av[])
+{
+#endif
+  CHECK_FUNCTION_EXISTS();
+  if (ac > 1000) {
+    return *av[0];
+  }
+  return 0;
+}
+
+#else /* CHECK_FUNCTION_EXISTS */
+
+#error "CHECK_FUNCTION_EXISTS has to specify the function"
+
+#endif /* CHECK_FUNCTION_EXISTS */
diff --git a/share/cmake-3.6/Modules/CheckFunctionExists.cmake b/share/cmake-3.6/Modules/CheckFunctionExists.cmake
new file mode 100644
index 0000000..5dd3751
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckFunctionExists.cmake
@@ -0,0 +1,98 @@
+#.rst:
+# CheckFunctionExists
+# -------------------
+#
+# Check if a C function can be linked
+#
+# CHECK_FUNCTION_EXISTS(<function> <variable>)
+#
+# Check that the <function> is provided by libraries on the system and
+# store the result in a <variable>.  This does not verify that any
+# system header file declares the function, only that it can be found at
+# link time (consider using CheckSymbolExists).
+# <variable> will be created as an internal cache variable.
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2002-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+
+macro(CHECK_FUNCTION_EXISTS FUNCTION VARIABLE)
+  if(NOT DEFINED "${VARIABLE}" OR "x${${VARIABLE}}" STREQUAL "x${VARIABLE}")
+    set(MACRO_CHECK_FUNCTION_DEFINITIONS
+      "-DCHECK_FUNCTION_EXISTS=${FUNCTION} ${CMAKE_REQUIRED_FLAGS}")
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Looking for ${FUNCTION}")
+    endif()
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_FUNCTION_EXISTS_ADD_LIBRARIES
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_FUNCTION_EXISTS_ADD_LIBRARIES)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_FUNCTION_EXISTS_ADD_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_FUNCTION_EXISTS_ADD_INCLUDES)
+    endif()
+
+    if(CMAKE_C_COMPILER_LOADED)
+      set(_cfe_source ${CMAKE_ROOT}/Modules/CheckFunctionExists.c)
+    elseif(CMAKE_CXX_COMPILER_LOADED)
+      set(_cfe_source ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckFunctionExists/CheckFunctionExists.cxx)
+      configure_file(${CMAKE_ROOT}/Modules/CheckFunctionExists.c "${_cfe_source}" COPYONLY)
+    else()
+      message(FATAL_ERROR "CHECK_FUNCTION_EXISTS needs either C or CXX language enabled")
+    endif()
+
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      ${_cfe_source}
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}
+      CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_FUNCTION_DEFINITIONS}
+      "${CHECK_FUNCTION_EXISTS_ADD_INCLUDES}"
+      OUTPUT_VARIABLE OUTPUT)
+    unset(_cfe_source)
+
+    if(${VARIABLE})
+      set(${VARIABLE} 1 CACHE INTERNAL "Have function ${FUNCTION}")
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${FUNCTION} - found")
+      endif()
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if the function ${FUNCTION} exists passed with the following output:\n"
+        "${OUTPUT}\n\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${FUNCTION} - not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have function ${FUNCTION}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if the function ${FUNCTION} exists failed with the following output:\n"
+        "${OUTPUT}\n\n")
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/CheckIncludeFile.c.in b/share/cmake-3.6/Modules/CheckIncludeFile.c.in
similarity index 100%
rename from share/cmake-3.2/Modules/CheckIncludeFile.c.in
rename to share/cmake-3.6/Modules/CheckIncludeFile.c.in
diff --git a/share/cmake-3.6/Modules/CheckIncludeFile.cmake b/share/cmake-3.6/Modules/CheckIncludeFile.cmake
new file mode 100644
index 0000000..ef1e39d
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckIncludeFile.cmake
@@ -0,0 +1,99 @@
+#.rst:
+# CheckIncludeFile
+# ----------------
+#
+# Provides a macro to check if a header file can be included in ``C``.
+#
+# .. command:: CHECK_INCLUDE_FILE
+#
+#   ::
+#
+#     CHECK_INCLUDE_FILE(<include> <variable> [<flags>])
+#
+#   Check if the given ``<include>`` file may be included in a ``C``
+#   source file and store the result in an internal cache entry named
+#   ``<variable>``.  The optional third argument may be used to add
+#   compilation flags to the check (or use ``CMAKE_REQUIRED_FLAGS`` below).
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ``CMAKE_REQUIRED_FLAGS``
+#   string of compile command line flags
+# ``CMAKE_REQUIRED_DEFINITIONS``
+#   list of macros to define (-DFOO=bar)
+# ``CMAKE_REQUIRED_INCLUDES``
+#   list of include directories
+# ``CMAKE_REQUIRED_QUIET``
+#   execute quietly without messages
+#
+# See the :module:`CheckIncludeFiles` module to check for multiple headers
+# at once.  See the :module:`CheckIncludeFileCXX` module to check for headers
+# using the ``CXX`` language.
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+macro(CHECK_INCLUDE_FILE INCLUDE VARIABLE)
+  if(NOT DEFINED "${VARIABLE}")
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_INCLUDE_FILE_C_INCLUDE_DIRS "-DINCLUDE_DIRECTORIES=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_INCLUDE_FILE_C_INCLUDE_DIRS)
+    endif()
+    set(MACRO_CHECK_INCLUDE_FILE_FLAGS ${CMAKE_REQUIRED_FLAGS})
+    set(CHECK_INCLUDE_FILE_VAR ${INCLUDE})
+    configure_file(${CMAKE_ROOT}/Modules/CheckIncludeFile.c.in
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.c)
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Looking for ${INCLUDE}")
+    endif()
+    if(${ARGC} EQUAL 3)
+      set(CMAKE_C_FLAGS_SAVE ${CMAKE_C_FLAGS})
+      set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${ARGV2}")
+    endif()
+
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.c
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      CMAKE_FLAGS
+      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILE_FLAGS}
+      "${CHECK_INCLUDE_FILE_C_INCLUDE_DIRS}"
+      OUTPUT_VARIABLE OUTPUT)
+
+    if(${ARGC} EQUAL 3)
+      set(CMAKE_C_FLAGS ${CMAKE_C_FLAGS_SAVE})
+    endif()
+
+    if(${VARIABLE})
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${INCLUDE} - found")
+      endif()
+      set(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if the include file ${INCLUDE} "
+        "exists passed with the following output:\n"
+        "${OUTPUT}\n\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${INCLUDE} - not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have include ${INCLUDE}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if the include file ${INCLUDE} "
+        "exists failed with the following output:\n"
+        "${OUTPUT}\n\n")
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/CheckIncludeFile.cxx.in b/share/cmake-3.6/Modules/CheckIncludeFile.cxx.in
similarity index 100%
rename from share/cmake-3.2/Modules/CheckIncludeFile.cxx.in
rename to share/cmake-3.6/Modules/CheckIncludeFile.cxx.in
diff --git a/share/cmake-3.6/Modules/CheckIncludeFileCXX.cmake b/share/cmake-3.6/Modules/CheckIncludeFileCXX.cmake
new file mode 100644
index 0000000..9a6df3b
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckIncludeFileCXX.cmake
@@ -0,0 +1,98 @@
+#.rst:
+# CheckIncludeFileCXX
+# -------------------
+#
+# Provides a macro to check if a header file can be included in ``CXX``.
+#
+# .. command:: CHECK_INCLUDE_FILE_CXX
+#
+#   ::
+#
+#     CHECK_INCLUDE_FILE_CXX(<include> <variable> [<flags>])
+#
+#   Check if the given ``<include>`` file may be included in a ``CXX``
+#   source file and store the result in an internal cache entry named
+#   ``<variable>``.  The optional third argument may be used to add
+#   compilation flags to the check (or use ``CMAKE_REQUIRED_FLAGS`` below).
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ``CMAKE_REQUIRED_FLAGS``
+#   string of compile command line flags
+# ``CMAKE_REQUIRED_DEFINITIONS``
+#   list of macros to define (-DFOO=bar)
+# ``CMAKE_REQUIRED_INCLUDES``
+#   list of include directories
+# ``CMAKE_REQUIRED_QUIET``
+#   execute quietly without messages
+#
+# See modules :module:`CheckIncludeFile` and :module:`CheckIncludeFiles`
+# to check for one or more ``C`` headers.
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+macro(CHECK_INCLUDE_FILE_CXX INCLUDE VARIABLE)
+  if(NOT DEFINED "${VARIABLE}" OR "x${${VARIABLE}}" STREQUAL "x${VARIABLE}")
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_INCLUDE_FILE_CXX_INCLUDE_DIRS "-DINCLUDE_DIRECTORIES=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_INCLUDE_FILE_CXX_INCLUDE_DIRS)
+    endif()
+    set(MACRO_CHECK_INCLUDE_FILE_FLAGS ${CMAKE_REQUIRED_FLAGS})
+    set(CHECK_INCLUDE_FILE_VAR ${INCLUDE})
+    configure_file(${CMAKE_ROOT}/Modules/CheckIncludeFile.cxx.in
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.cxx)
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Looking for C++ include ${INCLUDE}")
+    endif()
+    if(${ARGC} EQUAL 3)
+      set(CMAKE_CXX_FLAGS_SAVE ${CMAKE_CXX_FLAGS})
+      set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${ARGV2}")
+    endif()
+
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.cxx
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      CMAKE_FLAGS
+      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILE_FLAGS}
+      "${CHECK_INCLUDE_FILE_CXX_INCLUDE_DIRS}"
+      OUTPUT_VARIABLE OUTPUT)
+
+    if(${ARGC} EQUAL 3)
+      set(CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS_SAVE})
+    endif()
+
+    if(${VARIABLE})
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for C++ include ${INCLUDE} - found")
+      endif()
+      set(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if the include file ${INCLUDE} "
+        "exists passed with the following output:\n"
+        "${OUTPUT}\n\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for C++ include ${INCLUDE} - not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have include ${INCLUDE}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if the include file ${INCLUDE} "
+        "exists failed with the following output:\n"
+        "${OUTPUT}\n\n")
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.6/Modules/CheckIncludeFiles.cmake b/share/cmake-3.6/Modules/CheckIncludeFiles.cmake
new file mode 100644
index 0000000..843cd35
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckIncludeFiles.cmake
@@ -0,0 +1,107 @@
+#.rst:
+# CheckIncludeFiles
+# -----------------
+#
+# Provides a macro to check if a list of one or more header files can
+# be included together in ``C``.
+#
+# .. command:: CHECK_INCLUDE_FILES
+#
+#   ::
+#
+#     CHECK_INCLUDE_FILES("<includes>" <variable>)
+#
+#   Check if the given ``<includes>`` list may be included together
+#   in a ``C`` source file and store the result in an internal cache
+#   entry named ``<variable>``.  Specify the ``<includes>`` argument
+#   as a :ref:`;-list <CMake Language Lists>` of header file names.
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ``CMAKE_REQUIRED_FLAGS``
+#   string of compile command line flags
+# ``CMAKE_REQUIRED_DEFINITIONS``
+#   list of macros to define (-DFOO=bar)
+# ``CMAKE_REQUIRED_INCLUDES``
+#   list of include directories
+# ``CMAKE_REQUIRED_QUIET``
+#   execute quietly without messages
+#
+# See modules :module:`CheckIncludeFile` and :module:`CheckIncludeFileCXX`
+# to check for a single header file in ``C`` or ``CXX`` languages.
+
+#=============================================================================
+# Copyright 2003-2012 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+macro(CHECK_INCLUDE_FILES INCLUDE VARIABLE)
+  if(NOT DEFINED "${VARIABLE}")
+    set(CMAKE_CONFIGURABLE_FILE_CONTENT "/* */\n")
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CHECK_INCLUDE_FILES_INCLUDE_DIRS "-DINCLUDE_DIRECTORIES=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CHECK_INCLUDE_FILES_INCLUDE_DIRS)
+    endif()
+    set(CHECK_INCLUDE_FILES_CONTENT "/* */\n")
+    set(MACRO_CHECK_INCLUDE_FILES_FLAGS ${CMAKE_REQUIRED_FLAGS})
+    foreach(FILE ${INCLUDE})
+      set(CMAKE_CONFIGURABLE_FILE_CONTENT
+        "${CMAKE_CONFIGURABLE_FILE_CONTENT}#include <${FILE}>\n")
+    endforeach()
+    set(CMAKE_CONFIGURABLE_FILE_CONTENT
+      "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n\nint main(void){return 0;}\n")
+    configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
+      "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFiles.c" @ONLY)
+
+    set(_INCLUDE ${INCLUDE}) # remove empty elements
+    if("${_INCLUDE}" MATCHES "^([^;]+);.+;([^;]+)$")
+      list(LENGTH _INCLUDE _INCLUDE_LEN)
+      set(_description "${_INCLUDE_LEN} include files ${CMAKE_MATCH_1}, ..., ${CMAKE_MATCH_2}")
+    elseif("${_INCLUDE}" MATCHES "^([^;]+);([^;]+)$")
+      set(_description "include files ${CMAKE_MATCH_1}, ${CMAKE_MATCH_2}")
+    else()
+      set(_description "include file ${_INCLUDE}")
+    endif()
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Looking for ${_description}")
+    endif()
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFiles.c
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      CMAKE_FLAGS
+      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILES_FLAGS}
+      "${CHECK_INCLUDE_FILES_INCLUDE_DIRS}"
+      OUTPUT_VARIABLE OUTPUT)
+    if(${VARIABLE})
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${_description} - found")
+      endif()
+      set(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if files ${INCLUDE} "
+        "exist passed with the following output:\n"
+        "${OUTPUT}\n\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${_description} - not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have includes ${INCLUDE}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if files ${INCLUDE} "
+        "exist failed with the following output:\n"
+        "${OUTPUT}\nSource:\n${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/CheckLanguage.cmake b/share/cmake-3.6/Modules/CheckLanguage.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckLanguage.cmake
rename to share/cmake-3.6/Modules/CheckLanguage.cmake
diff --git a/share/cmake-3.6/Modules/CheckLibraryExists.cmake b/share/cmake-3.6/Modules/CheckLibraryExists.cmake
new file mode 100644
index 0000000..6b53823
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckLibraryExists.cmake
@@ -0,0 +1,97 @@
+#.rst:
+# CheckLibraryExists
+# ------------------
+#
+# Check if the function exists.
+#
+# CHECK_LIBRARY_EXISTS (LIBRARY FUNCTION LOCATION VARIABLE)
+#
+# ::
+#
+#   LIBRARY  - the name of the library you are looking for
+#   FUNCTION - the name of the function
+#   LOCATION - location where the library should be found
+#   VARIABLE - variable to store the result
+#              Will be created as an internal cache variable.
+#
+#
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+
+macro(CHECK_LIBRARY_EXISTS LIBRARY FUNCTION LOCATION VARIABLE)
+  if(NOT DEFINED "${VARIABLE}")
+    set(MACRO_CHECK_LIBRARY_EXISTS_DEFINITION
+      "-DCHECK_FUNCTION_EXISTS=${FUNCTION} ${CMAKE_REQUIRED_FLAGS}")
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Looking for ${FUNCTION} in ${LIBRARY}")
+    endif()
+    set(CHECK_LIBRARY_EXISTS_LIBRARIES ${LIBRARY})
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_LIBRARY_EXISTS_LIBRARIES
+        ${CHECK_LIBRARY_EXISTS_LIBRARIES} ${CMAKE_REQUIRED_LIBRARIES})
+    endif()
+
+    if(CMAKE_C_COMPILER_LOADED)
+      set(_cle_source ${CMAKE_ROOT}/Modules/CheckFunctionExists.c)
+    elseif(CMAKE_CXX_COMPILER_LOADED)
+      set(_cle_source ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckLibraryExists/CheckFunctionExists.cxx)
+      configure_file(${CMAKE_ROOT}/Modules/CheckFunctionExists.c "${_cle_source}" COPYONLY)
+    else()
+      message(FATAL_ERROR "CHECK_FUNCTION_EXISTS needs either C or CXX language enabled")
+    endif()
+
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      ${_cle_source}
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      LINK_LIBRARIES ${CHECK_LIBRARY_EXISTS_LIBRARIES}
+      CMAKE_FLAGS
+      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_LIBRARY_EXISTS_DEFINITION}
+      -DLINK_DIRECTORIES:STRING=${LOCATION}
+      OUTPUT_VARIABLE OUTPUT)
+    unset(_cle_source)
+
+    if(${VARIABLE})
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${FUNCTION} in ${LIBRARY} - found")
+      endif()
+      set(${VARIABLE} 1 CACHE INTERNAL "Have library ${LIBRARY}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if the function ${FUNCTION} exists in the ${LIBRARY} "
+        "passed with the following output:\n"
+        "${OUTPUT}\n\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${FUNCTION} in ${LIBRARY} - not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have library ${LIBRARY}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if the function ${FUNCTION} exists in the ${LIBRARY} "
+        "failed with the following output:\n"
+        "${OUTPUT}\n\n")
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/CheckLibraryExists.lists.in b/share/cmake-3.6/Modules/CheckLibraryExists.lists.in
similarity index 100%
rename from share/cmake-3.2/Modules/CheckLibraryExists.lists.in
rename to share/cmake-3.6/Modules/CheckLibraryExists.lists.in
diff --git a/share/cmake-3.2/Modules/CheckPrototypeDefinition.c.in b/share/cmake-3.6/Modules/CheckPrototypeDefinition.c.in
similarity index 100%
rename from share/cmake-3.2/Modules/CheckPrototypeDefinition.c.in
rename to share/cmake-3.6/Modules/CheckPrototypeDefinition.c.in
diff --git a/share/cmake-3.2/Modules/CheckPrototypeDefinition.cmake b/share/cmake-3.6/Modules/CheckPrototypeDefinition.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckPrototypeDefinition.cmake
rename to share/cmake-3.6/Modules/CheckPrototypeDefinition.cmake
diff --git a/share/cmake-3.2/Modules/CheckSizeOf.cmake b/share/cmake-3.6/Modules/CheckSizeOf.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckSizeOf.cmake
rename to share/cmake-3.6/Modules/CheckSizeOf.cmake
diff --git a/share/cmake-3.6/Modules/CheckStructHasMember.cmake b/share/cmake-3.6/Modules/CheckStructHasMember.cmake
new file mode 100644
index 0000000..6c15205
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckStructHasMember.cmake
@@ -0,0 +1,84 @@
+#.rst:
+# CheckStructHasMember
+# --------------------
+#
+# Check if the given struct or class has the specified member variable
+#
+# ::
+#
+#  CHECK_STRUCT_HAS_MEMBER(<struct> <member> <header> <variable>
+#                          [LANGUAGE <language>])
+#
+# ::
+#
+#   <struct> - the name of the struct or class you are interested in
+#   <member> - the member which existence you want to check
+#   <header> - the header(s) where the prototype should be declared
+#   <variable> - variable to store the result
+#   <language> - the compiler to use (C or CXX)
+#
+#
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+#
+#
+#
+# Example: CHECK_STRUCT_HAS_MEMBER("struct timeval" tv_sec sys/select.h
+# HAVE_TIMEVAL_TV_SEC LANGUAGE C)
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(CheckCSourceCompiles)
+include(CheckCXXSourceCompiles)
+
+macro (CHECK_STRUCT_HAS_MEMBER _STRUCT _MEMBER _HEADER _RESULT)
+   set(_INCLUDE_FILES)
+   foreach (it ${_HEADER})
+      set(_INCLUDE_FILES "${_INCLUDE_FILES}#include <${it}>\n")
+   endforeach ()
+
+   if("x${ARGN}" STREQUAL "x")
+      set(_lang C)
+   elseif("x${ARGN}" MATCHES "^xLANGUAGE;([a-zA-Z]+)$")
+      set(_lang "${CMAKE_MATCH_1}")
+   else()
+      message(FATAL_ERROR "Unknown arguments:\n  ${ARGN}\n")
+   endif()
+
+   set(_CHECK_STRUCT_MEMBER_SOURCE_CODE "
+${_INCLUDE_FILES}
+int main()
+{
+   (void)sizeof(((${_STRUCT} *)0)->${_MEMBER});
+   return 0;
+}
+")
+
+   if("${_lang}" STREQUAL "C")
+      CHECK_C_SOURCE_COMPILES("${_CHECK_STRUCT_MEMBER_SOURCE_CODE}" ${_RESULT})
+   elseif("${_lang}" STREQUAL "CXX")
+      CHECK_CXX_SOURCE_COMPILES("${_CHECK_STRUCT_MEMBER_SOURCE_CODE}" ${_RESULT})
+   else()
+      message(FATAL_ERROR "Unknown language:\n  ${_lang}\nSupported languages: C, CXX.\n")
+   endif()
+endmacro ()
diff --git a/share/cmake-3.6/Modules/CheckSymbolExists.cmake b/share/cmake-3.6/Modules/CheckSymbolExists.cmake
new file mode 100644
index 0000000..c4dff3f
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckSymbolExists.cmake
@@ -0,0 +1,117 @@
+#.rst:
+# CheckSymbolExists
+# -----------------
+#
+# Check if a symbol exists as a function, variable, or macro
+#
+# CHECK_SYMBOL_EXISTS(<symbol> <files> <variable>)
+#
+# Check that the <symbol> is available after including given header
+# <files> and store the result in a <variable>.  Specify the list of
+# files in one argument as a semicolon-separated list.
+# <variable> will be created as an internal cache variable.
+#
+# If the header files define the symbol as a macro it is considered
+# available and assumed to work.  If the header files declare the symbol
+# as a function or variable then the symbol must also be available for
+# linking.  If the symbol is a type or enum value it will not be
+# recognized (consider using CheckTypeSize or CheckCSourceCompiles).  If
+# the check needs to be done in C++, consider using
+# CHECK_CXX_SYMBOL_EXISTS(), which does the same as
+# CHECK_SYMBOL_EXISTS(), but in C++.
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+#=============================================================================
+# Copyright 2003-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+macro(CHECK_SYMBOL_EXISTS SYMBOL FILES VARIABLE)
+  if(CMAKE_C_COMPILER_LOADED)
+    _CHECK_SYMBOL_EXISTS("${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckSymbolExists.c" "${SYMBOL}" "${FILES}" "${VARIABLE}" )
+  elseif(CMAKE_CXX_COMPILER_LOADED)
+    _CHECK_SYMBOL_EXISTS("${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckSymbolExists.cxx" "${SYMBOL}" "${FILES}" "${VARIABLE}" )
+  else()
+    message(FATAL_ERROR "CHECK_SYMBOL_EXISTS needs either C or CXX language enabled")
+  endif()
+endmacro()
+
+macro(_CHECK_SYMBOL_EXISTS SOURCEFILE SYMBOL FILES VARIABLE)
+  if(NOT DEFINED "${VARIABLE}" OR "x${${VARIABLE}}" STREQUAL "x${VARIABLE}")
+    set(CMAKE_CONFIGURABLE_FILE_CONTENT "/* */\n")
+    set(MACRO_CHECK_SYMBOL_EXISTS_FLAGS ${CMAKE_REQUIRED_FLAGS})
+    if(CMAKE_REQUIRED_LIBRARIES)
+      set(CHECK_SYMBOL_EXISTS_LIBS
+        LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES})
+    else()
+      set(CHECK_SYMBOL_EXISTS_LIBS)
+    endif()
+    if(CMAKE_REQUIRED_INCLUDES)
+      set(CMAKE_SYMBOL_EXISTS_INCLUDES
+        "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}")
+    else()
+      set(CMAKE_SYMBOL_EXISTS_INCLUDES)
+    endif()
+    foreach(FILE ${FILES})
+      set(CMAKE_CONFIGURABLE_FILE_CONTENT
+        "${CMAKE_CONFIGURABLE_FILE_CONTENT}#include <${FILE}>\n")
+    endforeach()
+    set(CMAKE_CONFIGURABLE_FILE_CONTENT
+      "${CMAKE_CONFIGURABLE_FILE_CONTENT}\nint main(int argc, char** argv)\n{\n  (void)argv;\n#ifndef ${SYMBOL}\n  return ((int*)(&${SYMBOL}))[argc];\n#else\n  (void)argc;\n  return 0;\n#endif\n}\n")
+
+    configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
+      "${SOURCEFILE}" @ONLY)
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Looking for ${SYMBOL}")
+    endif()
+    try_compile(${VARIABLE}
+      ${CMAKE_BINARY_DIR}
+      "${SOURCEFILE}"
+      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+      ${CHECK_SYMBOL_EXISTS_LIBS}
+      CMAKE_FLAGS
+      -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_SYMBOL_EXISTS_FLAGS}
+      "${CMAKE_SYMBOL_EXISTS_INCLUDES}"
+      OUTPUT_VARIABLE OUTPUT)
+    if(${VARIABLE})
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${SYMBOL} - found")
+      endif()
+      set(${VARIABLE} 1 CACHE INTERNAL "Have symbol ${SYMBOL}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "Determining if the ${SYMBOL} "
+        "exist passed with the following output:\n"
+        "${OUTPUT}\nFile ${SOURCEFILE}:\n"
+        "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
+    else()
+      if(NOT CMAKE_REQUIRED_QUIET)
+        message(STATUS "Looking for ${SYMBOL} - not found")
+      endif()
+      set(${VARIABLE} "" CACHE INTERNAL "Have symbol ${SYMBOL}")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "Determining if the ${SYMBOL} "
+        "exist failed with the following output:\n"
+        "${OUTPUT}\nFile ${SOURCEFILE}:\n"
+        "${CMAKE_CONFIGURABLE_FILE_CONTENT}\n")
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/CheckTypeSize.c.in b/share/cmake-3.6/Modules/CheckTypeSize.c.in
similarity index 100%
rename from share/cmake-3.2/Modules/CheckTypeSize.c.in
rename to share/cmake-3.6/Modules/CheckTypeSize.c.in
diff --git a/share/cmake-3.6/Modules/CheckTypeSize.cmake b/share/cmake-3.6/Modules/CheckTypeSize.cmake
new file mode 100644
index 0000000..5938d6c
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckTypeSize.cmake
@@ -0,0 +1,273 @@
+#.rst:
+# CheckTypeSize
+# -------------
+#
+# Check sizeof a type
+#
+# ::
+#
+#   CHECK_TYPE_SIZE(TYPE VARIABLE [BUILTIN_TYPES_ONLY]
+#                                 [LANGUAGE <language>])
+#
+# Check if the type exists and determine its size.  On return,
+# "HAVE_${VARIABLE}" holds the existence of the type, and "${VARIABLE}"
+# holds one of the following:
+#
+# ::
+#
+#    <size> = type has non-zero size <size>
+#    "0"    = type has arch-dependent size (see below)
+#    ""     = type does not exist
+#
+# Both ``HAVE_${VARIABLE}`` and ``${VARIABLE}`` will be created as internal
+# cache variables.
+#
+# Furthermore, the variable "${VARIABLE}_CODE" holds C preprocessor code
+# to define the macro "${VARIABLE}" to the size of the type, or leave
+# the macro undefined if the type does not exist.
+#
+# The variable "${VARIABLE}" may be "0" when CMAKE_OSX_ARCHITECTURES has
+# multiple architectures for building OS X universal binaries.  This
+# indicates that the type size varies across architectures.  In this
+# case "${VARIABLE}_CODE" contains C preprocessor tests mapping from
+# each architecture macro to the corresponding type size.  The list of
+# architecture macros is stored in "${VARIABLE}_KEYS", and the value for
+# each key is stored in "${VARIABLE}-${KEY}".
+#
+# If the BUILTIN_TYPES_ONLY option is not given, the macro checks for
+# headers <sys/types.h>, <stdint.h>, and <stddef.h>, and saves results
+# in HAVE_SYS_TYPES_H, HAVE_STDINT_H, and HAVE_STDDEF_H.  The type size
+# check automatically includes the available headers, thus supporting
+# checks of types defined in the headers.
+#
+# If LANGUAGE is set, the specified compiler will be used to perform the
+# check. Acceptable values are C and CXX
+#
+# Despite the name of the macro you may use it to check the size of more
+# complex expressions, too.  To check e.g.  for the size of a struct
+# member you can do something like this:
+#
+# ::
+#
+#   check_type_size("((struct something*)0)->member" SIZEOF_MEMBER)
+#
+#
+#
+# The following variables may be set before calling this macro to modify
+# the way the check is run:
+#
+# ::
+#
+#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
+#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+#   CMAKE_REQUIRED_INCLUDES = list of include directories
+#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+#   CMAKE_EXTRA_INCLUDE_FILES = list of extra headers to include
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(CheckIncludeFile)
+include(CheckIncludeFileCXX)
+
+cmake_policy(PUSH)
+cmake_policy(SET CMP0054 NEW)
+
+get_filename_component(__check_type_size_dir "${CMAKE_CURRENT_LIST_FILE}" PATH)
+
+#-----------------------------------------------------------------------------
+# Helper function.  DO NOT CALL DIRECTLY.
+function(__check_type_size_impl type var map builtin language)
+  if(NOT CMAKE_REQUIRED_QUIET)
+    message(STATUS "Check size of ${type}")
+  endif()
+
+  # Include header files.
+  set(headers)
+  if(builtin)
+    if(HAVE_SYS_TYPES_H)
+      set(headers "${headers}#include <sys/types.h>\n")
+    endif()
+    if(HAVE_STDINT_H)
+      set(headers "${headers}#include <stdint.h>\n")
+    endif()
+    if(HAVE_STDDEF_H)
+      set(headers "${headers}#include <stddef.h>\n")
+    endif()
+  endif()
+  foreach(h ${CMAKE_EXTRA_INCLUDE_FILES})
+    set(headers "${headers}#include \"${h}\"\n")
+  endforeach()
+
+  # Perform the check.
+
+  if(language STREQUAL "C")
+    set(src ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${var}.c)
+  elseif(language STREQUAL "CXX")
+    set(src ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${var}.cpp)
+  else()
+    message(FATAL_ERROR "Unknown language:\n  ${language}\nSupported languages: C, CXX.\n")
+  endif()
+  set(bin ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${var}.bin)
+  configure_file(${__check_type_size_dir}/CheckTypeSize.c.in ${src} @ONLY)
+  try_compile(HAVE_${var} ${CMAKE_BINARY_DIR} ${src}
+    COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS}
+    LINK_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES}
+    CMAKE_FLAGS
+      "-DCOMPILE_DEFINITIONS:STRING=${CMAKE_REQUIRED_FLAGS}"
+      "-DINCLUDE_DIRECTORIES:STRING=${CMAKE_REQUIRED_INCLUDES}"
+    OUTPUT_VARIABLE output
+    COPY_FILE ${bin}
+    )
+
+  if(HAVE_${var})
+    # The check compiled.  Load information from the binary.
+    file(STRINGS ${bin} strings LIMIT_COUNT 10 REGEX "INFO:size")
+
+    # Parse the information strings.
+    set(regex_size ".*INFO:size\\[0*([^]]*)\\].*")
+    set(regex_key " key\\[([^]]*)\\]")
+    set(keys)
+    set(code)
+    set(mismatch)
+    set(first 1)
+    foreach(info ${strings})
+      if("${info}" MATCHES "${regex_size}")
+        # Get the type size.
+        set(size "${CMAKE_MATCH_1}")
+        if(first)
+          set(${var} ${size})
+        elseif(NOT "${size}" STREQUAL "${${var}}")
+          set(mismatch 1)
+        endif()
+        set(first 0)
+
+        # Get the architecture map key.
+        string(REGEX MATCH   "${regex_key}"       key "${info}")
+        string(REGEX REPLACE "${regex_key}" "\\1" key "${key}")
+        if(key)
+          set(code "${code}\nset(${var}-${key} \"${size}\")")
+          list(APPEND keys ${key})
+        endif()
+      endif()
+    endforeach()
+
+    # Update the architecture-to-size map.
+    if(mismatch AND keys)
+      configure_file(${__check_type_size_dir}/CheckTypeSizeMap.cmake.in ${map} @ONLY)
+      set(${var} 0)
+    else()
+      file(REMOVE ${map})
+    endif()
+
+    if(mismatch AND NOT keys)
+      message(SEND_ERROR "CHECK_TYPE_SIZE found different results, consider setting CMAKE_OSX_ARCHITECTURES or CMAKE_TRY_COMPILE_OSX_ARCHITECTURES to one or no architecture !")
+    endif()
+
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Check size of ${type} - done")
+    endif()
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+      "Determining size of ${type} passed with the following output:\n${output}\n\n")
+    set(${var} "${${var}}" CACHE INTERNAL "CHECK_TYPE_SIZE: sizeof(${type})")
+  else()
+    # The check failed to compile.
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Check size of ${type} - failed")
+    endif()
+    file(READ ${src} content)
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+      "Determining size of ${type} failed with the following output:\n${output}\n${src}:\n${content}\n\n")
+    set(${var} "" CACHE INTERNAL "CHECK_TYPE_SIZE: ${type} unknown")
+    file(REMOVE ${map})
+  endif()
+endfunction()
+
+#-----------------------------------------------------------------------------
+macro(CHECK_TYPE_SIZE TYPE VARIABLE)
+  # parse arguments
+  unset(doing)
+  foreach(arg ${ARGN})
+    if("x${arg}" STREQUAL "xBUILTIN_TYPES_ONLY")
+      set(_CHECK_TYPE_SIZE_${arg} 1)
+      unset(doing)
+    elseif("x${arg}" STREQUAL "xLANGUAGE") # change to MATCHES for more keys
+      set(doing "${arg}")
+      set(_CHECK_TYPE_SIZE_${doing} "")
+    elseif("x${doing}" STREQUAL "xLANGUAGE")
+      set(_CHECK_TYPE_SIZE_${doing} "${arg}")
+      unset(doing)
+    else()
+      message(FATAL_ERROR "Unknown argument:\n  ${arg}\n")
+    endif()
+  endforeach()
+  if("x${doing}" MATCHES "^x(LANGUAGE)$")
+    message(FATAL_ERROR "Missing argument:\n  ${doing} arguments requires a value\n")
+  endif()
+  if(DEFINED _CHECK_TYPE_SIZE_LANGUAGE)
+    if(NOT "x${_CHECK_TYPE_SIZE_LANGUAGE}" MATCHES "^x(C|CXX)$")
+      message(FATAL_ERROR "Unknown language:\n  ${_CHECK_TYPE_SIZE_LANGUAGE}.\nSupported languages: C, CXX.\n")
+    endif()
+    set(_language ${_CHECK_TYPE_SIZE_LANGUAGE})
+  else()
+    set(_language C)
+  endif()
+
+  # Optionally check for standard headers.
+  if(_CHECK_TYPE_SIZE_BUILTIN_TYPES_ONLY)
+    set(_builtin 0)
+  else()
+    set(_builtin 1)
+    if(_language STREQUAL "C")
+      check_include_file(sys/types.h HAVE_SYS_TYPES_H)
+      check_include_file(stdint.h HAVE_STDINT_H)
+      check_include_file(stddef.h HAVE_STDDEF_H)
+    elseif(_language STREQUAL "CXX")
+      check_include_file_cxx(sys/types.h HAVE_SYS_TYPES_H)
+      check_include_file_cxx(stdint.h HAVE_STDINT_H)
+      check_include_file_cxx(stddef.h HAVE_STDDEF_H)
+    endif()
+  endif()
+  unset(_CHECK_TYPE_SIZE_BUILTIN_TYPES_ONLY)
+  unset(_CHECK_TYPE_SIZE_LANGUAGE)
+
+  # Compute or load the size or size map.
+  set(${VARIABLE}_KEYS)
+  set(_map_file ${CMAKE_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/CheckTypeSize/${VARIABLE}.cmake)
+  if(NOT DEFINED HAVE_${VARIABLE})
+    __check_type_size_impl(${TYPE} ${VARIABLE} ${_map_file} ${_builtin} ${_language})
+  endif()
+  include(${_map_file} OPTIONAL)
+  set(_map_file)
+  set(_builtin)
+
+  # Create preprocessor code.
+  if(${VARIABLE}_KEYS)
+    set(${VARIABLE}_CODE)
+    set(_if if)
+    foreach(key ${${VARIABLE}_KEYS})
+      set(${VARIABLE}_CODE "${${VARIABLE}_CODE}#${_if} defined(${key})\n# define ${VARIABLE} ${${VARIABLE}-${key}}\n")
+      set(_if elif)
+    endforeach()
+    set(${VARIABLE}_CODE "${${VARIABLE}_CODE}#else\n# error ${VARIABLE} unknown\n#endif")
+    set(_if)
+  elseif(${VARIABLE})
+    set(${VARIABLE}_CODE "#define ${VARIABLE} ${${VARIABLE}}")
+  else()
+    set(${VARIABLE}_CODE "/* #undef ${VARIABLE} */")
+  endif()
+endmacro()
+
+#-----------------------------------------------------------------------------
+cmake_policy(POP)
diff --git a/share/cmake-3.2/Modules/CheckTypeSizeMap.cmake.in b/share/cmake-3.6/Modules/CheckTypeSizeMap.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/CheckTypeSizeMap.cmake.in
rename to share/cmake-3.6/Modules/CheckTypeSizeMap.cmake.in
diff --git a/share/cmake-3.6/Modules/CheckVariableExists.c b/share/cmake-3.6/Modules/CheckVariableExists.c
new file mode 100644
index 0000000..6e94877
--- /dev/null
+++ b/share/cmake-3.6/Modules/CheckVariableExists.c
@@ -0,0 +1,24 @@
+#ifdef CHECK_VARIABLE_EXISTS
+
+extern int CHECK_VARIABLE_EXISTS;
+
+#ifdef __CLASSIC_C__
+int main()
+{
+  int ac;
+  char* av[];
+#else
+int main(int ac, char* av[])
+{
+#endif
+  if (ac > 1000) {
+    return *av[0];
+  }
+  return CHECK_VARIABLE_EXISTS;
+}
+
+#else /* CHECK_VARIABLE_EXISTS */
+
+#error "CHECK_VARIABLE_EXISTS has to specify the variable"
+
+#endif /* CHECK_VARIABLE_EXISTS */
diff --git a/share/cmake-3.2/Modules/CheckVariableExists.cmake b/share/cmake-3.6/Modules/CheckVariableExists.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/CheckVariableExists.cmake
rename to share/cmake-3.6/Modules/CheckVariableExists.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/ADSP-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/ADSP-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/ADSP-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/ADSP-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/ARMCC-ASM.cmake b/share/cmake-3.6/Modules/Compiler/ARMCC-ASM.cmake
new file mode 100644
index 0000000..539d525
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/ARMCC-ASM.cmake
@@ -0,0 +1,7 @@
+include(Compiler/ARMCC)
+
+set(CMAKE_ASM_OUTPUT_EXTENSION ".o")
+set(CMAKE_ASM_OUTPUT_EXTENSION_REPLACE 1)
+
+set(CMAKE_ASM_COMPILE_OBJECT       "<CMAKE_ASM_COMPILER> <INCLUDES> <FLAGS> -o <OBJECT> <SOURCE>")
+set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS s;asm;msa)
diff --git a/share/cmake-3.6/Modules/Compiler/ARMCC-C.cmake b/share/cmake-3.6/Modules/Compiler/ARMCC-C.cmake
new file mode 100644
index 0000000..dcdcaab
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/ARMCC-C.cmake
@@ -0,0 +1,2 @@
+include(Compiler/ARMCC)
+__compiler_armcc(C)
diff --git a/share/cmake-3.6/Modules/Compiler/ARMCC-CXX.cmake b/share/cmake-3.6/Modules/Compiler/ARMCC-CXX.cmake
new file mode 100644
index 0000000..811fc93
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/ARMCC-CXX.cmake
@@ -0,0 +1,2 @@
+include(Compiler/ARMCC)
+__compiler_armcc(CXX)
diff --git a/share/cmake-3.6/Modules/Compiler/ARMCC-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/ARMCC-DetermineCompiler.cmake
new file mode 100644
index 0000000..a3667d7
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/ARMCC-DetermineCompiler.cmake
@@ -0,0 +1,16 @@
+# ARMCC Toolchain
+set(_compiler_id_pp_test "defined(__ARMCC_VERSION)")
+
+set(_compiler_id_version_compute "
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_DEC@(__ARMCC_VERSION/1000000)
+  # define @PREFIX@COMPILER_VERSION_MINOR @MACRO_DEC@(__ARMCC_VERSION/10000 % 100)
+  # define @PREFIX@COMPILER_VERSION_PATCH @MACRO_DEC@(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_DEC@(__ARMCC_VERSION/100000)
+  # define @PREFIX@COMPILER_VERSION_MINOR @MACRO_DEC@(__ARMCC_VERSION/10000 % 10)
+  # define @PREFIX@COMPILER_VERSION_PATCH @MACRO_DEC@(__ARMCC_VERSION    % 10000)
+#endif
+")
diff --git a/share/cmake-3.6/Modules/Compiler/ARMCC.cmake b/share/cmake-3.6/Modules/Compiler/ARMCC.cmake
new file mode 100644
index 0000000..3cf628c
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/ARMCC.cmake
@@ -0,0 +1,36 @@
+if(_ARMCC_CMAKE_LOADED)
+  return()
+endif()
+set(_ARMCC_CMAKE_LOADED TRUE)
+
+# See ARM Compiler documentation at:
+# http://infocenter.arm.com/help/topic/com.arm.doc.set.swdev/index.html
+
+get_filename_component(_CMAKE_C_TOOLCHAIN_LOCATION "${CMAKE_C_COMPILER}" PATH)
+get_filename_component(_CMAKE_CXX_TOOLCHAIN_LOCATION "${CMAKE_CXX_COMPILER}" PATH)
+
+set(CMAKE_EXECUTABLE_SUFFIX ".elf")
+
+find_program(CMAKE_ARMCC_LINKER armlink HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" )
+find_program(CMAKE_ARMCC_AR     armar   HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" )
+
+set(CMAKE_LINKER "${CMAKE_ARMCC_LINKER}" CACHE FILEPATH "The ARMCC linker" FORCE)
+mark_as_advanced(CMAKE_ARMCC_LINKER)
+set(CMAKE_AR "${CMAKE_ARMCC_AR}" CACHE FILEPATH "The ARMCC archiver" FORCE)
+mark_as_advanced(CMAKE_ARMCC_AR)
+
+macro(__compiler_armcc lang)
+  set(CMAKE_${lang}_FLAGS_INIT "")
+  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-g")
+  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-Ospace -DNDEBUG")
+  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-Otime -DNDEBUG")
+  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-O2 -g")
+
+  set(CMAKE_${lang}_OUTPUT_EXTENSION ".o")
+  set(CMAKE_${lang}_OUTPUT_EXTENSION_REPLACE 1)
+
+  set(CMAKE_${lang}_LINK_EXECUTABLE      "<CMAKE_LINKER> <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> <OBJECTS> -o <TARGET> --list <TARGET_BASE>.map")
+  set(CMAKE_${lang}_CREATE_STATIC_LIBRARY  "<CMAKE_AR> --create -cr <TARGET> <LINK_FLAGS> <OBJECTS>")
+
+  set(CMAKE_DEPFILE_FLAGS_${lang} "--depend=<DEPFILE> --depend_single_line --no_depend_system_headers")
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/Absoft-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/Absoft-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Absoft-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/Absoft-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/AppleClang-ASM.cmake b/share/cmake-3.6/Modules/Compiler/AppleClang-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/AppleClang-ASM.cmake
rename to share/cmake-3.6/Modules/Compiler/AppleClang-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/AppleClang-C-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/AppleClang-C-FeatureTests.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/AppleClang-C-FeatureTests.cmake
rename to share/cmake-3.6/Modules/Compiler/AppleClang-C-FeatureTests.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/AppleClang-C.cmake b/share/cmake-3.6/Modules/Compiler/AppleClang-C.cmake
new file mode 100644
index 0000000..1cc72c0
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/AppleClang-C.cmake
@@ -0,0 +1,42 @@
+include(Compiler/Clang)
+__compiler_clang(C)
+
+if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.0)
+  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c90")
+  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu90")
+
+  set(CMAKE_C99_STANDARD_COMPILE_OPTION "-std=c99")
+  set(CMAKE_C99_EXTENSION_COMPILE_OPTION "-std=gnu99")
+
+  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c11")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
+endif()
+
+if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.0)
+  if (NOT CMAKE_C_COMPILER_FORCED)
+    if (NOT CMAKE_C_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_C_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_C_COMPILER_ID} (${CMAKE_C_COMPILER}) version ${CMAKE_C_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_C_STANDARD_DEFAULT ${CMAKE_C_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_C_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    set(CMAKE_C_STANDARD_DEFAULT 99)
+  endif()
+endif()
+
+macro(cmake_record_c_compile_features)
+  macro(_get_appleclang_features std_version list)
+    record_compiler_features(C "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.0)
+    _get_appleclang_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES)
+    if (_result EQUAL 0)
+      _get_appleclang_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_appleclang_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/AppleClang-CXX-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/AppleClang-CXX-FeatureTests.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/AppleClang-CXX-FeatureTests.cmake
rename to share/cmake-3.6/Modules/Compiler/AppleClang-CXX-FeatureTests.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/AppleClang-CXX.cmake b/share/cmake-3.6/Modules/Compiler/AppleClang-CXX.cmake
new file mode 100644
index 0000000..95bc79a
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/AppleClang-CXX.cmake
@@ -0,0 +1,56 @@
+include(Compiler/Clang)
+__compiler_clang(CXX)
+
+if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC")
+  set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.0)
+  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "-std=c++98")
+  set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "-std=gnu++98")
+
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++11")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 6.1)
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++14")
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++14")
+elseif(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.1)
+  # AppleClang 5.0 knows this flag, but does not set a __cplusplus macro greater than 201103L
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++1y")
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++1y")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.0)
+  if (NOT CMAKE_CXX_COMPILER_FORCED)
+    if (NOT CMAKE_CXX_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_CXX_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_CXX_COMPILER_ID} (${CMAKE_CXX_COMPILER}) version ${CMAKE_CXX_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_CXX_STANDARD_DEFAULT ${CMAKE_CXX_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_CXX_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    set(CMAKE_CXX_STANDARD_DEFAULT 98)
+  endif()
+endif()
+
+
+macro(cmake_record_cxx_compile_features)
+  macro(_get_appleclang_features std_version list)
+    record_compiler_features(CXX "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.0)
+    set(_result 0)
+    if(CMAKE_CXX14_STANDARD_COMPILE_OPTION)
+      _get_appleclang_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_appleclang_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_appleclang_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/AppleClang-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/AppleClang-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/AppleClang-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/AppleClang-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Borland-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Borland-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Borland-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Borland-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/Bruce-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Bruce-C-DetermineCompiler.cmake
new file mode 100644
index 0000000..bb9f4b9
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Bruce-C-DetermineCompiler.cmake
@@ -0,0 +1 @@
+set(_compiler_id_pp_test "defined(__BCC__)")
diff --git a/share/cmake-3.6/Modules/Compiler/Bruce-C.cmake b/share/cmake-3.6/Modules/Compiler/Bruce-C.cmake
new file mode 100644
index 0000000..23676ec
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Bruce-C.cmake
@@ -0,0 +1,7 @@
+# Bruce C Compiler ignores "-g" flag and optimization cannot be
+# enabled here (it is implemented only for 8086 target).
+set (CMAKE_C_FLAGS_INIT "-D__CLASSIC_C__")
+set (CMAKE_C_FLAGS_DEBUG_INIT "-g")
+set (CMAKE_C_FLAGS_MINSIZEREL_INIT "-DNDEBUG")
+set (CMAKE_C_FLAGS_RELEASE_INIT "-DNDEBUG")
+set (CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "-g -DNDEBUG")
diff --git a/share/cmake-3.6/Modules/Compiler/CCur-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/CCur-Fortran.cmake
new file mode 100644
index 0000000..6ec06ae
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CCur-Fortran.cmake
@@ -0,0 +1 @@
+include(Compiler/GNU-Fortran)
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-ASM.cmake b/share/cmake-3.6/Modules/Compiler/Clang-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Clang-ASM.cmake
rename to share/cmake-3.6/Modules/Compiler/Clang-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-C-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/Clang-C-FeatureTests.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Clang-C-FeatureTests.cmake
rename to share/cmake-3.6/Modules/Compiler/Clang-C-FeatureTests.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/Clang-C.cmake b/share/cmake-3.6/Modules/Compiler/Clang-C.cmake
new file mode 100644
index 0000000..d8b7743
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Clang-C.cmake
@@ -0,0 +1,51 @@
+include(Compiler/Clang)
+__compiler_clang(C)
+
+cmake_policy(GET CMP0025 appleClangPolicy)
+if(WIN32 OR (APPLE AND NOT appleClangPolicy STREQUAL NEW))
+  return()
+endif()
+
+if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4)
+  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c90")
+  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu90")
+
+  set(CMAKE_C99_STANDARD_COMPILE_OPTION "-std=c99")
+  set(CMAKE_C99_EXTENSION_COMPILE_OPTION "-std=gnu99")
+
+  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c11")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
+endif()
+
+if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4)
+  if (NOT CMAKE_C_COMPILER_FORCED)
+    if (NOT CMAKE_C_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_C_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_C_COMPILER_ID} (${CMAKE_C_COMPILER}) version ${CMAKE_C_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_C_STANDARD_DEFAULT ${CMAKE_C_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_C_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.6)
+      set(CMAKE_C_STANDARD_DEFAULT 11)
+    else()
+      set(CMAKE_C_STANDARD_DEFAULT 99)
+    endif()
+  endif()
+endif()
+
+macro(cmake_record_c_compile_features)
+  macro(_get_clang_features std_version list)
+    record_compiler_features(C "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (UNIX AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4)
+    _get_clang_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES)
+    if (_result EQUAL 0)
+      _get_clang_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_clang_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-CXX-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/Clang-CXX-FeatureTests.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Clang-CXX-FeatureTests.cmake
rename to share/cmake-3.6/Modules/Compiler/Clang-CXX-FeatureTests.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/Clang-CXX-TestableFeatures.cmake b/share/cmake-3.6/Modules/Compiler/Clang-CXX-TestableFeatures.cmake
new file mode 100644
index 0000000..69965a6
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Clang-CXX-TestableFeatures.cmake
@@ -0,0 +1,56 @@
+
+set(testable_features
+  cxx_alias_templates
+  cxx_alignas
+  cxx_attributes
+  cxx_auto_type
+  cxx_binary_literals
+  cxx_constexpr
+  cxx_contextual_conversions
+  cxx_decltype
+  cxx_default_function_template_args
+  cxx_defaulted_functions
+  cxx_delegating_constructors
+  cxx_deleted_functions
+  cxx_explicit_conversions
+  cxx_generalized_initializers
+  cxx_inheriting_constructors
+  cxx_lambdas
+  cxx_local_type_template_args
+  cxx_noexcept
+  cxx_nonstatic_member_init
+  cxx_nullptr
+  cxx_range_for
+  cxx_raw_string_literals
+  cxx_reference_qualified_functions
+  cxx_relaxed_constexpr
+  cxx_return_type_deduction
+  cxx_rvalue_references
+  cxx_static_assert
+  cxx_strong_enums
+  cxx_thread_local
+  cxx_unicode_literals
+  cxx_unrestricted_unions
+  cxx_user_literals
+  cxx_variable_templates
+  cxx_variadic_templates
+)
+if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC")
+  list(APPEND testable_features cxx_decltype_incomplete_return_types)
+endif()
+
+foreach(feature ${testable_features})
+  set(_cmake_feature_test_${feature} "${_cmake_oldestSupported} && __has_feature(${feature})")
+endforeach()
+
+unset(testable_features)
+
+set(_cmake_feature_test_cxx_aggregate_default_initializers "${_cmake_oldestSupported} && __has_feature(cxx_aggregate_nsdmi)")
+
+set(_cmake_feature_test_cxx_trailing_return_types "${_cmake_oldestSupported} && __has_feature(cxx_trailing_return)")
+set(_cmake_feature_test_cxx_alignof "${_cmake_oldestSupported} && __has_feature(cxx_alignas)")
+set(_cmake_feature_test_cxx_final "${_cmake_oldestSupported} && __has_feature(cxx_override_control)")
+set(_cmake_feature_test_cxx_override "${_cmake_oldestSupported} && __has_feature(cxx_override_control)")
+set(_cmake_feature_test_cxx_uniform_initialization "${_cmake_oldestSupported} && __has_feature(cxx_generalized_initializers)")
+set(_cmake_feature_test_cxx_defaulted_move_initializers "${_cmake_oldestSupported} && __has_feature(cxx_defaulted_functions)")
+set(_cmake_feature_test_cxx_lambda_init_captures "${_cmake_oldestSupported} && __has_feature(cxx_init_captures)")
diff --git a/share/cmake-3.6/Modules/Compiler/Clang-CXX.cmake b/share/cmake-3.6/Modules/Compiler/Clang-CXX.cmake
new file mode 100644
index 0000000..dc62711
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Clang-CXX.cmake
@@ -0,0 +1,61 @@
+include(Compiler/Clang)
+__compiler_clang(CXX)
+
+if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC")
+  set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
+endif()
+
+cmake_policy(GET CMP0025 appleClangPolicy)
+if(APPLE AND NOT appleClangPolicy STREQUAL NEW)
+  return()
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 2.1)
+  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "-std=c++98")
+  set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "-std=gnu++98")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.1)
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++11")
+elseif(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 2.1)
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++0x")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++0x")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.5)
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++14")
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++14")
+elseif(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4)
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++1y")
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++1y")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4)
+  if (NOT CMAKE_CXX_COMPILER_FORCED)
+    if (NOT CMAKE_CXX_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_CXX_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_CXX_COMPILER_ID} (${CMAKE_CXX_COMPILER}) version ${CMAKE_CXX_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_CXX_STANDARD_DEFAULT ${CMAKE_CXX_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_CXX_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    set(CMAKE_CXX_STANDARD_DEFAULT 98)
+  endif()
+endif()
+
+macro(cmake_record_cxx_compile_features)
+  macro(_get_clang_features std_version list)
+    record_compiler_features(CXX "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4)
+    _get_clang_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES)
+    if (_result EQUAL 0)
+      _get_clang_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_clang_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Clang-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Clang-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Clang-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Clang-DetermineCompilerInternal.cmake b/share/cmake-3.6/Modules/Compiler/Clang-DetermineCompilerInternal.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Clang-DetermineCompilerInternal.cmake
rename to share/cmake-3.6/Modules/Compiler/Clang-DetermineCompilerInternal.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Clang.cmake b/share/cmake-3.6/Modules/Compiler/Clang.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Clang.cmake
rename to share/cmake-3.6/Modules/Compiler/Clang.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Comeau-CXX-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Comeau-CXX-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Comeau-CXX-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Comeau-CXX-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Compaq-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Compaq-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Compaq-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Compaq-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Compaq-CXX-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Compaq-CXX-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Compaq-CXX-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Compaq-CXX-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Cray-C.cmake b/share/cmake-3.6/Modules/Compiler/Cray-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Cray-C.cmake
rename to share/cmake-3.6/Modules/Compiler/Cray-C.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Cray-CXX.cmake b/share/cmake-3.6/Modules/Compiler/Cray-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Cray-CXX.cmake
rename to share/cmake-3.6/Modules/Compiler/Cray-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/Cray-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Cray-DetermineCompiler.cmake
new file mode 100644
index 0000000..6602294
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Cray-DetermineCompiler.cmake
@@ -0,0 +1,6 @@
+
+set(_compiler_id_pp_test "defined(_CRAYC)")
+
+set(_compiler_id_version_compute "
+# define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_DEC@(_RELEASE_MAJOR)
+# define @PREFIX@COMPILER_VERSION_MINOR @MACRO_DEC@(_RELEASE_MINOR)")
diff --git a/share/cmake-3.2/Modules/Compiler/Cray-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/Cray-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Cray-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/Cray-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-C.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-C.cmake
new file mode 100644
index 0000000..6b461ce
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-C.cmake
@@ -0,0 +1,11 @@
+if(__craylinux_crayprgenv_c)
+  return()
+endif()
+set(__craylinux_crayprgenv_c 1)
+
+include(Compiler/CrayPrgEnv)
+macro(__CrayPrgEnv_setup_C compiler_cmd link_cmd)
+  __CrayPrgEnv_setup(C
+    ${CMAKE_ROOT}/Modules/CMakeCCompilerABI.c
+    ${compiler_cmd} ${link_cmd})
+endmacro()
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-CXX.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-CXX.cmake
new file mode 100644
index 0000000..aad85b6
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-CXX.cmake
@@ -0,0 +1,11 @@
+if(__craylinux_crayprgenv_cxx)
+  return()
+endif()
+set(__craylinux_crayprgenv_cxx 1)
+
+include(Compiler/CrayPrgEnv)
+macro(__CrayPrgEnv_setup_CXX compiler_cmd link_cmd)
+  __CrayPrgEnv_setup(CXX
+    ${CMAKE_ROOT}/Modules/CMakeCXXCompilerABI.cpp
+    ${compiler_cmd} ${link_cmd})
+endmacro()
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-C.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-C.cmake
new file mode 100644
index 0000000..547a4b4
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-C.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_cray_c)
+  return()
+endif()
+set(__craylinux_crayprgenv_cray_c 1)
+
+include(Compiler/CrayPrgEnv-C)
+__CrayPrgEnv_setup_C("/opt/cray/cce/.*/ccfe" "/opt/cray/cce/.*/ld")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-CXX.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-CXX.cmake
new file mode 100644
index 0000000..df8452c
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-CXX.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_cray_cxx)
+  return()
+endif()
+set(__craylinux_crayprgenv_cray_cxx 1)
+
+include(Compiler/CrayPrgEnv-CXX)
+__CrayPrgEnv_setup_CXX("/opt/cray/cce/.*/ccfe" "/opt/cray/cce/.*/ld")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-Fortran.cmake
new file mode 100644
index 0000000..9f46a04
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Cray-Fortran.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_cray_fortran)
+  return()
+endif()
+set(__craylinux_crayprgenv_cray_fortran 1)
+
+include(Compiler/CrayPrgEnv-Fortran)
+__CrayPrgEnv_setup_Fortran("/opt/cray/cce/.*/ftnfe" "/opt/cray/cce/.*/ld")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Fortran.cmake
new file mode 100644
index 0000000..9c4d269
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Fortran.cmake
@@ -0,0 +1,11 @@
+if(__craylinux_crayprgenv_fortran)
+  return()
+endif()
+set(__craylinux_crayprgenv_fortran 1)
+
+include(Compiler/CrayPrgEnv)
+macro(__CrayPrgEnv_setup_Fortran compiler_cmd link_cmd)
+  __CrayPrgEnv_setup(Fortran
+    ${CMAKE_ROOT}/Modules/CMakeFortranCompilerABI.F
+    ${compiler_cmd} ${link_cmd})
+endmacro()
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-C.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-C.cmake
new file mode 100644
index 0000000..248081b
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-C.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_gnu_c)
+  return()
+endif()
+set(__craylinux_crayprgenv_gnu_c 1)
+
+include(Compiler/CrayPrgEnv-C)
+__CrayPrgEnv_setup_C("/opt/gcc/.*/cc1" "/opt/gcc/.*/collect2")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-CXX.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-CXX.cmake
new file mode 100644
index 0000000..be4eb6d
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-CXX.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_gnu_cxx)
+  return()
+endif()
+set(__craylinux_crayprgenv_gnu_cxx 1)
+
+include(Compiler/CrayPrgEnv-CXX)
+__CrayPrgEnv_setup_CXX("/opt/gcc/.*/cc1plus" "/opt/gcc/.*/collect2")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-Fortran.cmake
new file mode 100644
index 0000000..8bd23ff
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-GNU-Fortran.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_gnu_fortran)
+  return()
+endif()
+set(__craylinux_crayprgenv_gnu_fortran 1)
+
+include(Compiler/CrayPrgEnv-Fortran)
+__CrayPrgEnv_setup_Fortran("/opt/gcc/.*/f951" "/opt/gcc/.*/collect2")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-C.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-C.cmake
new file mode 100644
index 0000000..83c4e38
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-C.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_intel_c)
+  return()
+endif()
+set(__craylinux_crayprgenv_intel_c 1)
+
+include(Compiler/CrayPrgEnv-C)
+__CrayPrgEnv_setup_C("/opt/intel/.*/mcpcom" "^ld ")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-CXX.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-CXX.cmake
new file mode 100644
index 0000000..3c3c3e6
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-CXX.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_intel_cxx)
+  return()
+endif()
+set(__craylinux_crayprgenv_intel_cxx 1)
+
+include(Compiler/CrayPrgEnv-CXX)
+__CrayPrgEnv_setup_CXX("/opt/intel/.*/mcpcom" "^ld ")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-Fortran.cmake
new file mode 100644
index 0000000..08a316d
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-Intel-Fortran.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_intel_fortran)
+  return()
+endif()
+set(__craylinux_crayprgenv_intel_fortran 1)
+
+include(Compiler/CrayPrgEnv-Fortran)
+__CrayPrgEnv_setup_Fortran("/opt/intel/.*/fortcom" "^ld ")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-C.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-C.cmake
new file mode 100644
index 0000000..f45767c
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-C.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_pgi_c)
+  return()
+endif()
+set(__craylinux_crayprgenv_pgi_c 1)
+
+include(Compiler/CrayPrgEnv-C)
+__CrayPrgEnv_setup_C("/opt/pgi/[^ ]*/pgc" "/usr/bin/ld")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-CXX.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-CXX.cmake
new file mode 100644
index 0000000..a2a286f
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-CXX.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_pgi_cxx)
+  return()
+endif()
+set(__craylinux_crayprgenv_pgi_cxx 1)
+
+include(Compiler/CrayPrgEnv-CXX)
+__CrayPrgEnv_setup_CXX("/opt/pgi/[^ ]*/pgcpp" "/usr/bin/ld")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-Fortran.cmake
new file mode 100644
index 0000000..f6ba7c0
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv-PGI-Fortran.cmake
@@ -0,0 +1,7 @@
+if(__craylinux_crayprgenv_pgi_fortran)
+  return()
+endif()
+set(__craylinux_crayprgenv_pgi_fortran 1)
+
+include(Compiler/CrayPrgEnv-Fortran)
+__CrayPrgEnv_setup_Fortran("/opt/pgi/[^ ]*/pgf" "/usr/bin/ld")
diff --git a/share/cmake-3.6/Modules/Compiler/CrayPrgEnv.cmake b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv.cmake
new file mode 100644
index 0000000..fa39b00
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/CrayPrgEnv.cmake
@@ -0,0 +1,91 @@
+# Guard against multiple inclusions
+if(__craylinux_crayprgenv)
+  return()
+endif()
+set(__craylinux_crayprgenv 1)
+
+macro(__cray_extract_args cmd tag_regex out_var make_absolute)
+  string(REGEX MATCHALL "${tag_regex}" args "${cmd}")
+  foreach(arg IN LISTS args)
+    string(REGEX REPLACE "^${tag_regex}$" "\\2" param "${arg}")
+    if(make_absolute)
+      get_filename_component(param "${param}" ABSOLUTE)
+    endif()
+    list(APPEND ${out_var} ${param})
+  endforeach()
+endmacro()
+
+function(__cray_extract_implicit src compiler_cmd link_cmd lang include_dirs_var link_dirs_var link_libs_var)
+  set(BIN "${CMAKE_PLATFORM_INFO_DIR}/CrayExtractImplicit_${lang}.bin")
+  execute_process(
+    COMMAND ${CMAKE_${lang}_COMPILER} ${CMAKE_${lang}_VERBOSE_FLAG} -o ${BIN}
+    RESULT_VARIABLE result
+    OUTPUT_VARIABLE output
+    ERROR_VARIABLE error
+    )
+  if(EXISTS "${BIN}")
+    file(REMOVE "${BIN}")
+  endif()
+  set(include_dirs)
+  set(link_dirs)
+  set(link_libs)
+  string(REGEX REPLACE "\r?\n" ";" output_lines "${output}\n${error}")
+  foreach(line IN LISTS output_lines)
+    if("${line}" MATCHES "${compiler_cmd}")
+      __cray_extract_args("${line}" " -(I ?|isystem )([^ ]*)" include_dirs 1)
+      set(processed_include 1)
+    endif()
+    if("${line}" MATCHES "${link_cmd}")
+      __cray_extract_args("${line}" " -(L ?)([^ ]*)" link_dirs 1)
+      __cray_extract_args("${line}" " -(l ?)([^ ]*)" link_libs 0)
+      set(processed_link 1)
+    endif()
+    if(processed_include AND processed_link)
+      break()
+    endif()
+  endforeach()
+
+  set(${include_dirs_var} "${include_dirs}" PARENT_SCOPE)
+  set(${link_dirs_var}    "${link_dirs}" PARENT_SCOPE)
+  set(${link_libs_var}    "${link_libs}" PARENT_SCOPE)
+  set(CRAY_${lang}_EXTRACTED_IMPLICIT 1 CACHE INTERNAL "" FORCE)
+endfunction()
+
+macro(__CrayPrgEnv_setup lang test_src compiler_cmd link_cmd)
+  if(DEFINED ENV{CRAYPE_VERSION})
+    message(STATUS "Cray Programming Environment $ENV{CRAYPE_VERSION} ${lang}")
+  elseif(DEFINED ENV{ASYNCPE_VERSION})
+    message(STATUS "Cray XT Programming Environment $ENV{ASYNCPE_VERSION} ${lang}")
+  endif()
+
+  # Flags for the Cray wrappers
+  set(CMAKE_STATIC_LIBRARY_LINK_${lang}_FLAGS "-static")
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "")
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-shared")
+  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-dynamic")
+
+  # If the link type is not explicitly specified in the environment then
+  # the Cray wrappers assume that the code will be built staticly so
+  # we check the following condition(s) are NOT met
+  #  Compiler flags are explicitly dynamic
+  #  Env var is dynamic and compiler flags are not explicitly static
+  if(NOT (((CMAKE_${lang}_FLAGS MATCHES "(^| )-dynamic($| )") OR
+         (CMAKE_EXE_LINKER_FLAGS MATCHES "(^| )-dynamic($| )"))
+         OR
+         (("$ENV{CRAYPE_LINK_TYPE}" STREQUAL "dynamic") AND
+          NOT ((CMAKE_${lang}_FLAGS MATCHES "(^| )-static($| )") OR
+               (CMAKE_EXE_LINKER_FLAGS MATCHES "(^| )-static($| )")))))
+    set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE)
+    set(BUILD_SHARED_LIBS FALSE CACHE BOOL "")
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
+    set(CMAKE_LINK_SEARCH_START_STATIC TRUE)
+  endif()
+  if(NOT CRAY_${lang}_EXTRACTED_IMPLICIT)
+    __cray_extract_implicit(
+      ${test_src} ${compiler_cmd} ${link_cmd} ${lang}
+      CMAKE_${lang}_IMPLICIT_INCLUDE_DIRECTORIES
+      CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES
+      CMAKE_${lang}_IMPLICIT_LINK_LIBRARIES
+      )
+  endif()
+endmacro()
diff --git a/share/cmake-3.6/Modules/Compiler/Embarcadero-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Embarcadero-DetermineCompiler.cmake
new file mode 100644
index 0000000..8375624
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Embarcadero-DetermineCompiler.cmake
@@ -0,0 +1,7 @@
+
+set(_compiler_id_pp_test "defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)")
+
+set(_compiler_id_version_compute "
+# define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_HEX@(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define @PREFIX@COMPILER_VERSION_MINOR @MACRO_HEX@(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define @PREFIX@COMPILER_VERSION_PATCH @MACRO_DEC@(__CODEGEARC_VERSION__     & 0xFFFF)")
diff --git a/share/cmake-3.2/Modules/Compiler/Fujitsu-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Fujitsu-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Fujitsu-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Fujitsu-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/G95-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/G95-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/G95-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/G95-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/GHS-C.cmake b/share/cmake-3.6/Modules/Compiler/GHS-C.cmake
new file mode 100644
index 0000000..3072715
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GHS-C.cmake
@@ -0,0 +1,30 @@
+include(Compiler/GHS)
+
+set(CMAKE_C_VERBOSE_FLAG "-v")
+set(CMAKE_C_OUTPUT_EXTENSION ".o")
+
+set(CMAKE_C_FLAGS_INIT "")
+set(CMAKE_C_FLAGS_DEBUG_INIT "-Odebug -g")
+set(CMAKE_C_FLAGS_MINSIZEREL_INIT "-Ospace")
+set(CMAKE_C_FLAGS_RELEASE_INIT "-O")
+set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "-O -g")
+
+set(CMAKE_C_GHS_KERNEL_FLAGS_DEBUG_INIT "-ldebug ${CMAKE_C_FLAGS_DEBUG_INIT}")
+set(CMAKE_C_GHS_KERNEL_FLAGS_MINSIZEREL_INIT "${CMAKE_C_FLAGS_MINSIZEREL_INIT}")
+set(CMAKE_C_GHS_KERNEL_FLAGS_RELEASE_INIT "${CMAKE_C_FLAGS_RELEASE_INIT}")
+set(CMAKE_C_GHS_KERNEL_FLAGS_RELWITHDEBINFO_INIT
+  "-ldebug ${CMAKE_C_FLAGS_RELWITHDEBINFO_INIT}")
+
+if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
+  set (CMAKE_C_GHS_KERNEL_FLAGS_DEBUG "${CMAKE_C_GHS_KERNEL_FLAGS_DEBUG_INIT}"
+    CACHE STRING "Kernel flags used by the compiler during debug builds.")
+  set (CMAKE_C_GHS_KERNEL_FLAGS_MINSIZEREL
+    "${CMAKE_C_GHS_KERNEL_FLAGS_MINSIZEREL_INIT}" CACHE STRING
+    "Kernel flags used by the compiler during release builds for minimum size.")
+  set (CMAKE_C_GHS_KERNEL_FLAGS_RELEASE
+    "${CMAKE_C_GHS_KERNEL_FLAGS_RELEASE_INIT}"
+    CACHE STRING "Kernel flags used by the compiler during release builds.")
+  set (CMAKE_C_GHS_KERNEL_FLAGS_RELWITHDEBINFO
+    "${CMAKE_C_GHS_KERNEL_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
+    "Kernel flags used by the compiler during release builds with debug info.")
+endif()
diff --git a/share/cmake-3.6/Modules/Compiler/GHS-CXX.cmake b/share/cmake-3.6/Modules/Compiler/GHS-CXX.cmake
new file mode 100644
index 0000000..a51591b
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GHS-CXX.cmake
@@ -0,0 +1,34 @@
+include(Compiler/GHS)
+
+set(CMAKE_CXX_VERBOSE_FLAG "-v")
+set(CMAKE_CXX_OUTPUT_EXTENSION ".o")
+
+set(CMAKE_CXX_FLAGS_INIT "")
+set(CMAKE_CXX_FLAGS_DEBUG_INIT "-Odebug -g")
+set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "-Ospace")
+set(CMAKE_CXX_FLAGS_RELEASE_INIT "-O")
+set(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-O -g")
+
+set(CMAKE_CXX_GHS_KERNEL_FLAGS_DEBUG_INIT
+  "-ldebug ${CMAKE_CXX_FLAGS_DEBUG_INIT}")
+set(CMAKE_CXX_GHS_KERNEL_FLAGS_MINSIZEREL_INIT
+  "${CMAKE_CXX_FLAGS_MINSIZEREL_INIT}")
+set(CMAKE_CXX_GHS_KERNEL_FLAGS_RELEASE_INIT
+  "${CMAKE_CXX_FLAGS_RELEASE_INIT}")
+set(CMAKE_CXX_GHS_KERNEL_FLAGS_RELWITHDEBINFO_INIT
+  "-ldebug ${CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT}")
+
+if(NOT CMAKE_NOT_USING_CONFIG_FLAGS)
+  set (CMAKE_CXX_GHS_KERNEL_FLAGS_DEBUG
+    "${CMAKE_CXX_GHS_KERNEL_FLAGS_DEBUG_INIT}"
+    CACHE STRING "Kernel flags used by the compiler during debug builds.")
+  set (CMAKE_CXX_GHS_KERNEL_FLAGS_MINSIZEREL
+    "${CMAKE_CXX_GHS_KERNEL_FLAGS_MINSIZEREL_INIT}" CACHE STRING
+    "Kernel flags used by the compiler during release builds for minimum size.")
+  set (CMAKE_CXX_GHS_KERNEL_FLAGS_RELEASE
+    "${CMAKE_CXX_GHS_KERNEL_FLAGS_RELEASE_INIT}"
+    CACHE STRING "Kernel flags used by the compiler during release builds.")
+  set (CMAKE_CXX_GHS_KERNEL_FLAGS_RELWITHDEBINFO
+    "${CMAKE_CXX_GHS_KERNEL_FLAGS_RELWITHDEBINFO_INIT}" CACHE STRING
+    "Kernel flags used by the compiler during release builds with debug info.")
+endif()
diff --git a/share/cmake-3.6/Modules/Compiler/GHS-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/GHS-DetermineCompiler.cmake
new file mode 100644
index 0000000..56d24e2
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GHS-DetermineCompiler.cmake
@@ -0,0 +1,6 @@
+set(_compiler_id_pp_test "defined(__INTEGRITY)")
+
+set(_compiler_id_version_compute "
+# define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_DEC@(__INTEGRITY_MAJOR_VERSION)
+# define @PREFIX@COMPILER_VERSION_MINOR @MACRO_DEC@(__INTEGRITY_MINOR_VERSION)
+# define @PREFIX@COMPILER_VERSION_PATCH @MACRO_DEC@(__INTEGRITY_PATCH_VERSION)")
diff --git a/share/cmake-3.6/Modules/Compiler/GHS.cmake b/share/cmake-3.6/Modules/Compiler/GHS.cmake
new file mode 100644
index 0000000..e6a867d
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GHS.cmake
@@ -0,0 +1,8 @@
+if(__COMPILER_GHS)
+  return()
+endif()
+set(__COMPILER_GHS 1)
+
+set(CMAKE_EXECUTABLE_SUFFIX ".as")
+set(CMAKE_LIBRARY_PATH_TERMINATOR "\n")
+set(CMAKE_LIBRARY_PATH_FLAG "  -L")
diff --git a/share/cmake-3.2/Modules/Compiler/GNU-ASM.cmake b/share/cmake-3.6/Modules/Compiler/GNU-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/GNU-ASM.cmake
rename to share/cmake-3.6/Modules/Compiler/GNU-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/GNU-C-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/GNU-C-FeatureTests.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/GNU-C-FeatureTests.cmake
rename to share/cmake-3.6/Modules/Compiler/GNU-C-FeatureTests.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/GNU-C.cmake b/share/cmake-3.6/Modules/Compiler/GNU-C.cmake
new file mode 100644
index 0000000..2c478da
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GNU-C.cmake
@@ -0,0 +1,59 @@
+include(Compiler/GNU)
+__compiler_gnu(C)
+
+if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.5)
+  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c90")
+  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu90")
+elseif (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
+  set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c89")
+  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu89")
+endif()
+
+if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
+  set(CMAKE_C99_STANDARD_COMPILE_OPTION "-std=c99")
+  set(CMAKE_C99_EXTENSION_COMPILE_OPTION "-std=gnu99")
+endif()
+
+if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7)
+  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c11")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11")
+elseif (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.6)
+  set(CMAKE_C11_STANDARD_COMPILE_OPTION "-std=c1x")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu1x")
+endif()
+
+if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
+  if (NOT CMAKE_C_COMPILER_FORCED)
+    if (NOT CMAKE_C_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_C_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_C_COMPILER_ID} (${CMAKE_C_COMPILER}) version ${CMAKE_C_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_C_STANDARD_DEFAULT ${CMAKE_C_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_C_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0)
+      set(CMAKE_C_STANDARD_DEFAULT 11)
+    else()
+      set(CMAKE_C_STANDARD_DEFAULT 90)
+    endif()
+  endif()
+endif()
+
+
+macro(cmake_record_c_compile_features)
+  macro(_get_gcc_features std_version list)
+    record_compiler_features(C "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.6)
+    _get_gcc_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES)
+  endif()
+  if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.4)
+    if (_result EQUAL 0)
+      _get_gcc_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_gcc_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/GNU-CXX-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/GNU-CXX-FeatureTests.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/GNU-CXX-FeatureTests.cmake
rename to share/cmake-3.6/Modules/Compiler/GNU-CXX-FeatureTests.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/GNU-CXX.cmake b/share/cmake-3.6/Modules/Compiler/GNU-CXX.cmake
new file mode 100644
index 0000000..e1c555b
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GNU-CXX.cmake
@@ -0,0 +1,66 @@
+include(Compiler/GNU)
+__compiler_gnu(CXX)
+
+if (WIN32)
+  if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.6)
+    set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fno-keep-inline-dllexport")
+  endif()
+else()
+  if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.2)
+    set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
+  endif()
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
+  # Supported since 4.3
+  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "-std=c++98")
+  set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "-std=gnu++98")
+endif()
+
+if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.7)
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++11")
+elseif (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
+  # 4.3 supports 0x variants
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++0x")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++0x")
+endif()
+
+if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9)
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++14")
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++14")
+elseif (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8)
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++1y")
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++1y")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
+  if (NOT CMAKE_CXX_COMPILER_FORCED)
+    if (NOT CMAKE_CXX_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_CXX_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_CXX_COMPILER_ID} (${CMAKE_CXX_COMPILER}) version ${CMAKE_CXX_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_CXX_STANDARD_DEFAULT ${CMAKE_CXX_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_CXX_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    set(CMAKE_CXX_STANDARD_DEFAULT 98)
+  endif()
+endif()
+
+macro(cmake_record_cxx_compile_features)
+  macro(_get_gcc_features std_version list)
+    record_compiler_features(CXX "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8)
+    _get_gcc_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES)
+  endif()
+  if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4)
+    if (_result EQUAL 0)
+      _get_gcc_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_gcc_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.6/Modules/Compiler/GNU-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/GNU-DetermineCompiler.cmake
new file mode 100644
index 0000000..6ddc566
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GNU-DetermineCompiler.cmake
@@ -0,0 +1,11 @@
+
+set(_compiler_id_pp_test "defined(__GNUC__)")
+
+set(_compiler_id_version_compute "
+# define @PREFIX@COMPILER_VERSION_MAJOR @MACRO_DEC@(__GNUC__)
+# if defined(__GNUC_MINOR__)
+#  define @PREFIX@COMPILER_VERSION_MINOR @MACRO_DEC@(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define @PREFIX@COMPILER_VERSION_PATCH @MACRO_DEC@(__GNUC_PATCHLEVEL__)
+# endif")
diff --git a/share/cmake-3.6/Modules/Compiler/GNU-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/GNU-Fortran.cmake
new file mode 100644
index 0000000..e9c8a59
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GNU-Fortran.cmake
@@ -0,0 +1,15 @@
+include(Compiler/GNU)
+__compiler_gnu(Fortran)
+
+set(CMAKE_Fortran_FORMAT_FIXED_FLAG "-ffixed-form")
+set(CMAKE_Fortran_FORMAT_FREE_FLAG "-ffree-form")
+
+# No -DNDEBUG for Fortran.
+set(CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "-Os")
+set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-O3")
+
+# No -isystem for Fortran because it will not find .mod files.
+unset(CMAKE_INCLUDE_SYSTEM_FLAG_Fortran)
+
+# Fortran-specific feature flags.
+set(CMAKE_Fortran_MODDIR_FLAG -J)
diff --git a/share/cmake-3.6/Modules/Compiler/GNU.cmake b/share/cmake-3.6/Modules/Compiler/GNU.cmake
new file mode 100644
index 0000000..c2d393d
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/GNU.cmake
@@ -0,0 +1,58 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__COMPILER_GNU)
+  return()
+endif()
+set(__COMPILER_GNU 1)
+
+macro(__compiler_gnu lang)
+  # Feature flags.
+  set(CMAKE_${lang}_VERBOSE_FLAG "-v")
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "-fPIC")
+  if(NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 3.4)
+    set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "-fPIE")
+  endif()
+  if(NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4.2)
+    set(CMAKE_${lang}_COMPILE_OPTIONS_VISIBILITY "-fvisibility=")
+  endif()
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "-fPIC")
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-shared")
+  set(CMAKE_${lang}_COMPILE_OPTIONS_SYSROOT "--sysroot=")
+
+  # Older versions of gcc (< 4.5) contain a bug causing them to report a missing
+  # header file as a warning if depfiles are enabled, causing check_header_file
+  # tests to always succeed.  Work around this by disabling dependency tracking
+  # in try_compile mode.
+  get_property(_IN_TC GLOBAL PROPERTY IN_TRY_COMPILE)
+  if(NOT _IN_TC OR CMAKE_FORCE_DEPFILES)
+    # distcc does not transform -o to -MT when invoking the preprocessor
+    # internally, as it ought to.  Work around this bug by setting -MT here
+    # even though it isn't strictly necessary.
+    set(CMAKE_DEPFILE_FLAGS_${lang} "-MD -MT <OBJECT> -MF <DEPFILE>")
+  endif()
+
+  # Initial configuration flags.
+  set(CMAKE_${lang}_FLAGS_INIT "")
+  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-g")
+  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-Os -DNDEBUG")
+  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-O3 -DNDEBUG")
+  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-O2 -g -DNDEBUG")
+  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+  if(NOT APPLE OR NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4) # work around #4462
+    set(CMAKE_INCLUDE_SYSTEM_FLAG_${lang} "-isystem ")
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/HP-ASM.cmake b/share/cmake-3.6/Modules/Compiler/HP-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/HP-ASM.cmake
rename to share/cmake-3.6/Modules/Compiler/HP-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/HP-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/HP-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/HP-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/HP-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/HP-C.cmake b/share/cmake-3.6/Modules/Compiler/HP-C.cmake
new file mode 100644
index 0000000..b42ba2b
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/HP-C.cmake
@@ -0,0 +1,4 @@
+set(CMAKE_C_VERBOSE_FLAG "-v")
+
+set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/HP-CXX-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/HP-CXX-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/HP-CXX-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/HP-CXX-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/HP-CXX.cmake b/share/cmake-3.6/Modules/Compiler/HP-CXX.cmake
new file mode 100644
index 0000000..7548754
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/HP-CXX.cmake
@@ -0,0 +1,13 @@
+set(CMAKE_CXX_VERBOSE_FLAG "-v")
+
+set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+
+# HP aCC since version 3.80 supports the flag +hpxstd98 to get ANSI C++98
+# template support. It is known that version 6.25 doesn't need that flag.
+# Current assumption: the flag is needed for every version from 3.80 to 4
+# to get it working.
+if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4 AND
+   NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.80)
+  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "+hpxstd98")
+endif()
diff --git a/share/cmake-3.6/Modules/Compiler/HP-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/HP-Fortran.cmake
new file mode 100644
index 0000000..a6ca2c2
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/HP-Fortran.cmake
@@ -0,0 +1,6 @@
+set(CMAKE_Fortran_VERBOSE_FLAG "-v")
+set(CMAKE_Fortran_FORMAT_FIXED_FLAG "+source=fixed")
+set(CMAKE_Fortran_FORMAT_FREE_FLAG "+source=free")
+
+set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
diff --git a/share/cmake-3.6/Modules/Compiler/IAR-ASM.cmake b/share/cmake-3.6/Modules/Compiler/IAR-ASM.cmake
new file mode 100644
index 0000000..844c30e
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/IAR-ASM.cmake
@@ -0,0 +1,14 @@
+# This file is processed when the IAR compiler is used for an assembler file
+
+include(Compiler/IAR)
+
+set(CMAKE_ASM_COMPILE_OBJECT  "<CMAKE_ASM_COMPILER> <SOURCE> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT>")
+
+if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "ARM")
+  set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS s;asm;msa)
+endif()
+
+
+if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "AVR")
+  set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS s90;asm;msa)
+endif()
diff --git a/share/cmake-3.6/Modules/Compiler/IAR-C.cmake b/share/cmake-3.6/Modules/Compiler/IAR-C.cmake
new file mode 100644
index 0000000..f1b6ff7
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/IAR-C.cmake
@@ -0,0 +1,37 @@
+# This file is processed when the IAR compiler is used for a C file
+
+
+include(Compiler/IAR)
+
+set(CMAKE_C_COMPILE_OBJECT             "<CMAKE_C_COMPILER> <SOURCE> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT>")
+set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <SOURCE> <DEFINES> <INCLUDES> <FLAGS> --preprocess=cnl <PREPROCESSED_SOURCE>")
+set(CMAKE_C_CREATE_ASSEMBLY_SOURCE     "<CMAKE_C_COMPILER> <SOURCE> <DEFINES> <INCLUDES> <FLAGS> -lAH <ASSEMBLY_SOURCE> -o <OBJECT>.dummy")
+
+set(CMAKE_C_RESPONSE_FILE_LINK_FLAG "-f")
+set(CMAKE_DEPFILE_FLAGS_C "--dependencies=ns <DEPFILE>")
+
+# The toolchains for ARM and AVR are quite different:
+if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "ARM")
+
+  set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
+  set(CMAKE_C_CREATE_STATIC_LIBRARY "<CMAKE_AR> <TARGET> --create <LINK_FLAGS> <OBJECTS> ")
+
+endif()
+
+
+if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "AVR")
+  set(CMAKE_C_OUTPUT_EXTENSION ".r90")
+
+  if(NOT CMAKE_C_LINK_FLAGS)
+    set(CMAKE_C_LINK_FLAGS "-Fmotorola")
+  endif()
+
+  set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
+  set(CMAKE_C_CREATE_STATIC_LIBRARY "<CMAKE_AR> -o <TARGET> <OBJECTS> ")
+
+endif()
+
+# add the target specific include directory:
+get_filename_component(_compilerDir "${CMAKE_C_COMPILER}" PATH)
+get_filename_component(_compilerDir "${_compilerDir}" PATH)
+include_directories("${_compilerDir}/inc" )
diff --git a/share/cmake-3.6/Modules/Compiler/IAR-CXX.cmake b/share/cmake-3.6/Modules/Compiler/IAR-CXX.cmake
new file mode 100644
index 0000000..ffb144f
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/IAR-CXX.cmake
@@ -0,0 +1,35 @@
+# This file is processed when the IAR compiler is used for a C++ file
+
+include(Compiler/IAR)
+
+set(CMAKE_CXX_COMPILE_OBJECT  "<CMAKE_CXX_COMPILER> <SOURCE> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT>")
+
+set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <SOURCE> <DEFINES> <INCLUDES> <FLAGS> --preprocess=cnl <PREPROCESSED_SOURCE>")
+set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE     "<CMAKE_CXX_COMPILER> <SOURCE> <DEFINES> <INCLUDES> <FLAGS> -lAH <ASSEMBLY_SOURCE> -o <OBJECT>.dummy")
+
+set(CMAKE_CXX_RESPONSE_FILE_LINK_FLAG "-f")
+set(CMAKE_DEPFILE_FLAGS_CXX "--dependencies=ns <DEPFILE>")
+
+if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "ARM")
+
+  set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
+  set(CMAKE_CXX_CREATE_STATIC_LIBRARY "<CMAKE_AR> <TARGET> --create <LINK_FLAGS> <OBJECTS> ")
+
+endif()
+
+
+if("${IAR_TARGET_ARCHITECTURE}" STREQUAL "AVR")
+  set(CMAKE_CXX_OUTPUT_EXTENSION ".r90")
+  if(NOT CMAKE_CXX_LINK_FLAGS)
+    set(CMAKE_CXX_LINK_FLAGS "-Fmotorola")
+  endif()
+
+  set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_LINKER> <OBJECTS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES> -o <TARGET>")
+  set(CMAKE_CXX_CREATE_STATIC_LIBRARY "<CMAKE_AR> -o <TARGET> <OBJECTS> ")
+
+endif()
+
+# add the target specific include directory:
+get_filename_component(_compilerDir "${CMAKE_C_COMPILER}" PATH)
+get_filename_component(_compilerDir "${_compilerDir}" PATH)
+include_directories("${_compilerDir}/inc")
diff --git a/share/cmake-3.2/Modules/Compiler/IAR-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/IAR-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/IAR-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/IAR-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/IAR.cmake b/share/cmake-3.6/Modules/Compiler/IAR.cmake
new file mode 100644
index 0000000..8c6c3f6
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/IAR.cmake
@@ -0,0 +1,46 @@
+# This file is processed when the IAR compiler is used for a C or C++ file
+# Documentation can be downloaded here: http://www.iar.com/website1/1.0.1.0/675/1/
+# The initial feature request is here: https://cmake.org/Bug/view.php?id=10176
+# It also contains additional links and information.
+
+if(_IAR_CMAKE_LOADED)
+  return()
+endif()
+set(_IAR_CMAKE_LOADED TRUE)
+
+
+get_filename_component(_CMAKE_C_TOOLCHAIN_LOCATION "${CMAKE_C_COMPILER}" PATH)
+get_filename_component(_CMAKE_CXX_TOOLCHAIN_LOCATION "${CMAKE_CXX_COMPILER}" PATH)
+get_filename_component(_CMAKE_ASM_TOOLCHAIN_LOCATION "${CMAKE_ASM_COMPILER}" PATH)
+
+
+if("${CMAKE_C_COMPILER}" MATCHES "arm"  OR  "${CMAKE_CXX_COMPILER}" MATCHES "arm"  OR  "${CMAKE_ASM_COMPILER}" MATCHES "arm")
+  set(CMAKE_EXECUTABLE_SUFFIX ".elf")
+
+  # For arm, IAR uses the "ilinkarm" linker and "iarchive" archiver:
+  find_program(CMAKE_IAR_LINKER ilinkarm HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}")
+  find_program(CMAKE_IAR_AR iarchive HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}" )
+
+  set(IAR_TARGET_ARCHITECTURE "ARM" CACHE STRING "IAR compiler target architecture")
+endif()
+
+if("${CMAKE_C_COMPILER}" MATCHES "avr"  OR  "${CMAKE_CXX_COMPILER}" MATCHES "avr"  OR  "${CMAKE_ASM_COMPILER}" MATCHES "avr")
+  set(CMAKE_EXECUTABLE_SUFFIX ".bin")
+
+  # For AVR and AVR32, IAR uses the "xlink" linker and the "xar" archiver:
+  find_program(CMAKE_IAR_LINKER xlink HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}" )
+  find_program(CMAKE_IAR_AR xar HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}" "${_CMAKE_CXX_TOOLCHAIN_LOCATION}" "${_CMAKE_ASM_TOOLCHAIN_LOCATION}" )
+
+  set(IAR_TARGET_ARCHITECTURE "AVR" CACHE STRING "IAR compiler target architecture")
+
+  set(CMAKE_LIBRARY_PATH_FLAG "-I")
+
+endif()
+
+if(NOT IAR_TARGET_ARCHITECTURE)
+  message(FATAL_ERROR "The IAR compiler for this architecture is not yet supported "
+          " by CMake. Please go to https://cmake.org/Bug and enter a feature request there.")
+endif()
+
+set(CMAKE_LINKER "${CMAKE_IAR_LINKER}" CACHE FILEPATH "The IAR linker" FORCE)
+set(CMAKE_AR "${CMAKE_IAR_AR}" CACHE FILEPATH "The IAR archiver" FORCE)
diff --git a/share/cmake-3.2/Modules/Compiler/IBMCPP-C-DetermineVersionInternal.cmake b/share/cmake-3.6/Modules/Compiler/IBMCPP-C-DetermineVersionInternal.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/IBMCPP-C-DetermineVersionInternal.cmake
rename to share/cmake-3.6/Modules/Compiler/IBMCPP-C-DetermineVersionInternal.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/IBMCPP-CXX-DetermineVersionInternal.cmake b/share/cmake-3.6/Modules/Compiler/IBMCPP-CXX-DetermineVersionInternal.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/IBMCPP-CXX-DetermineVersionInternal.cmake
rename to share/cmake-3.6/Modules/Compiler/IBMCPP-CXX-DetermineVersionInternal.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Intel-ASM.cmake b/share/cmake-3.6/Modules/Compiler/Intel-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Intel-ASM.cmake
rename to share/cmake-3.6/Modules/Compiler/Intel-ASM.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/Intel-C-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/Intel-C-FeatureTests.cmake
new file mode 100644
index 0000000..34175c8
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Intel-C-FeatureTests.cmake
@@ -0,0 +1,23 @@
+# References:
+#   - https://software.intel.com/en-us/articles/iso-iec-standards-language-conformance-for-intel-c-compiler
+#   - https://software.intel.com/en-us/articles/c99-support-in-intel-c-compiler
+#   - https://software.intel.com/en-us/articles/c11-support-in-intel-c-compiler
+
+# FIXME: Intel C feature detection works only when simulating the GNU compiler.
+if("x${CMAKE_C_SIMULATE_ID}" STREQUAL "xMSVC")
+  return()
+endif()
+
+set(DETECT_C99 "defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L")
+
+#static assert is only around in version 1500 update 2 and above
+set(_cmake_feature_test_c_static_assert "(__INTEL_COMPILER > 1500 || (__INTEL_COMPILER == 1500 && __INTEL_COMPILER_UPDATE > 1) ) && ${DETECT_C99}")
+
+set(_cmake_oldestSupported "__INTEL_COMPILER >= 1110")
+set(Intel_C99 "${_cmake_oldestSupported} && ${DETECT_C99}")
+set(_cmake_feature_test_c_restrict "${Intel_C99}")
+set(_cmake_feature_test_c_variadic_macros "${Intel_C99}")
+set(_cmake_feature_test_c_function_prototypes "${_cmake_oldestSupported}")
+unset(Intel_C99)
+
+unset(DETECT_C99)
diff --git a/share/cmake-3.6/Modules/Compiler/Intel-C.cmake b/share/cmake-3.6/Modules/Compiler/Intel-C.cmake
new file mode 100644
index 0000000..eb9602a
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Intel-C.cmake
@@ -0,0 +1,68 @@
+set(CMAKE_C_VERBOSE_FLAG "-v")
+
+set(CMAKE_C_FLAGS_INIT "")
+set(CMAKE_C_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_C_FLAGS_MINSIZEREL_INIT "-Os -DNDEBUG")
+set(CMAKE_C_FLAGS_RELEASE_INIT "-O3 -DNDEBUG")
+set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "-O2 -g -DNDEBUG")
+
+set(CMAKE_DEPFILE_FLAGS_C "-MD -MT <OBJECT> -MF <DEPFILE>")
+
+if("x${CMAKE_C_SIMULATE_ID}" STREQUAL "xMSVC")
+  set(_std -Qstd)
+else()
+  set(_std -std)
+endif()
+
+if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 15.0.0)
+  set(CMAKE_C11_STANDARD_COMPILE_OPTION "${_std}=c11")
+  set(CMAKE_C11_EXTENSION_COMPILE_OPTION "${_std}=c11")
+endif()
+
+if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 12.1)
+  set(CMAKE_C90_STANDARD_COMPILE_OPTION "${_std}=c89")
+  set(CMAKE_C90_EXTENSION_COMPILE_OPTION "${_std}=c89")
+  set(CMAKE_C99_STANDARD_COMPILE_OPTION "${_std}=c99")
+  set(CMAKE_C99_EXTENSION_COMPILE_OPTION "${_std}=c99")
+endif()
+
+if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 12.1)
+  if (NOT CMAKE_C_COMPILER_FORCED)
+    if (NOT CMAKE_C_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_C_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_C_COMPILER_ID} (${CMAKE_C_COMPILER}) version ${CMAKE_C_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_C_STANDARD_DEFAULT ${CMAKE_C_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_C_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 15.0.0)
+      set(CMAKE_C_STANDARD_DEFAULT 11)
+    else()
+      set(CMAKE_C_STANDARD_DEFAULT 90)
+    endif()
+  endif()
+endif()
+
+unset(_std)
+
+macro(cmake_record_c_compile_features)
+  macro(_get_intel_c_features std_version list)
+    record_compiler_features(C "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (NOT "x${CMAKE_C_SIMULATE_ID}" STREQUAL "xMSVC" AND
+      NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 12.1)
+    if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 15.0.0)
+      _get_intel_c_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_intel_c_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_intel_c_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
+
+set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.6/Modules/Compiler/Intel-CXX-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/Intel-CXX-FeatureTests.cmake
new file mode 100644
index 0000000..e111c07
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Intel-CXX-FeatureTests.cmake
@@ -0,0 +1,96 @@
+# References:
+#   - https://software.intel.com/en-us/articles/c0x-features-supported-by-intel-c-compiler
+#   - https://software.intel.com/en-us/articles/c14-features-supported-by-intel-c-compiler
+
+# FIXME: Intel C++ feature detection works only when simulating the GNU compiler.
+# When simulating MSVC, Intel always sets __cplusplus to 199711L.
+if("x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC")
+  return()
+endif()
+
+# these are not implemented in any version at time of writing
+#set(_cmake_feature_test_cxx_variable_templates "${Intel15_CXX14}")
+#set(_cmake_feature_test_cxx_relaxed_constexpr "${Intel15_CXX14}")
+
+set(_cmake_oldestSupported "__INTEL_COMPILER >= 1210")
+set(DETECT_CXX11 "((__cplusplus >= 201103L) || defined(__INTEL_CXX11_MODE__) || defined(__GXX_EXPERIMENTAL_CXX0X__))")
+#ICC version 15 update 1 has a bug where __cplusplus is defined as 1 no matter
+#if you are compiling as 98/11/14. So to properly detect C++14 with this version
+#we look for the existence of __GXX_EXPERIMENTAL_CXX0X__ but not __INTEL_CXX11_MODE__
+set(DETECT_BUGGY_ICC15 "((__INTEL_COMPILER == 1500) && (__INTEL_COMPILER_UPDATE == 1))")
+set(DETECT_CXX14 "((__cplusplus >= 201300L) || ((__cplusplus == 201103L) && !defined(__INTEL_CXX11_MODE__)) || ((${DETECT_BUGGY_ICC15}) && defined(__GXX_EXPERIMENTAL_CXX0X__) && !defined(__INTEL_CXX11_MODE__) ) )")
+
+set(Intel16_CXX14 "__INTEL_COMPILER >= 1600 && ${DETECT_CXX14}")
+set(_cmake_feature_test_cxx_aggregate_default_initializers "${Intel16_CXX14}")
+set(_cmake_feature_test_cxx_contextual_conversions "${Intel16_CXX14}")
+set(_cmake_feature_test_cxx_generic_lambdas "${Intel16_CXX14}")
+set(_cmake_feature_test_cxx_digit_separators "${Intel16_CXX14}")
+# This test is supposed to work in Intel 14 but the compiler has a bug
+# in versions 14 and 15::
+# https://software.intel.com/en-us/forums/intel-c-compiler/topic/600514
+# It also appears to fail with an internal compiler error on Intel 16.
+#set(_cmake_feature_test_cxx_generalized_initializers "${Intel16_CXX14}")
+
+set(Intel15_CXX14 "__INTEL_COMPILER >= 1500 && ${DETECT_CXX14}")
+set(_cmake_feature_test_cxx_decltype_auto "${Intel15_CXX14}")
+set(_cmake_feature_test_cxx_lambda_init_captures "${Intel15_CXX14}")
+set(_cmake_feature_test_cxx_attribute_deprecated "${Intel15_CXX14}")
+set(_cmake_feature_test_cxx_return_type_deduction "${Intel15_CXX14}")
+
+set(Intel15_CXX11 "__INTEL_COMPILER >= 1500 && ${DETECT_CXX11}")
+set(_cmake_feature_test_cxx_alignas "${Intel15_CXX11}")
+set(_cmake_feature_test_cxx_alignof "${Intel15_CXX11}")
+set(_cmake_feature_test_cxx_inheriting_constructors "${Intel15_CXX11}")
+set(_cmake_feature_test_cxx_user_literals "${Intel15_CXX11}")
+set(_cmake_feature_test_cxx_thread_local "${Intel15_CXX11}")
+
+set(Intel14_CXX11 "${DETECT_CXX11} && (__INTEL_COMPILER > 1400 || (__INTEL_COMPILER == 1400 && __INTEL_COMPILER_UPDATE >= 2))")
+# Documented as 12.0+ but in testing it only works on 14.0.2+
+set(_cmake_feature_test_cxx_decltype_incomplete_return_types "${Intel14_CXX11}")
+
+set(Intel14_CXX11 "__INTEL_COMPILER >= 1400 && ${DETECT_CXX11}")
+set(_cmake_feature_test_cxx_delegating_constructors "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_constexpr "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_sizeof_member "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_strong_enums "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_reference_qualified_functions "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_raw_string_literals "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_unicode_literals "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_inline_namespaces "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_unrestricted_unions "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_nonstatic_member_init "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_enum_forward_declarations "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_override "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_final "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_noexcept "${Intel14_CXX11}")
+set(_cmake_feature_test_cxx_defaulted_move_initializers "${Intel14_CXX11}")
+
+set(Intel13_CXX11 "__INTEL_COMPILER >= 1300 && ${DETECT_CXX11}")
+set(_cmake_feature_test_cxx_explicit_conversions "${Intel13_CXX11}")
+set(_cmake_feature_test_cxx_range_for "${Intel13_CXX11}")
+# Cannot find Intel documentation for N2640: cxx_uniform_initialization
+set(_cmake_feature_test_cxx_uniform_initialization "${Intel13_CXX11}")
+
+set(Intel121_CXX11 "${_cmake_oldestSupported} && ${DETECT_CXX11}")
+set(_cmake_feature_test_cxx_variadic_templates "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_alias_templates "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_nullptr "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_trailing_return_types "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_attributes "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_default_function_template_args "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_extended_friend_declarations "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_rvalue_references "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_decltype "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_defaulted_functions "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_deleted_functions "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_local_type_template_args "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_lambdas "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_binary_literals "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_static_assert "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_right_angle_brackets "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_auto_type "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_extern_templates "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_variadic_macros "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_long_long_type "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_func_identifier "${Intel121_CXX11}")
+set(_cmake_feature_test_cxx_template_template_parameters "${Intel121_CXX11}")
diff --git a/share/cmake-3.6/Modules/Compiler/Intel-CXX.cmake b/share/cmake-3.6/Modules/Compiler/Intel-CXX.cmake
new file mode 100644
index 0000000..369e041
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Intel-CXX.cmake
@@ -0,0 +1,76 @@
+set(CMAKE_CXX_VERBOSE_FLAG "-v")
+
+set(CMAKE_CXX_FLAGS_INIT "")
+set(CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "-Os -DNDEBUG")
+set(CMAKE_CXX_FLAGS_RELEASE_INIT "-O3 -DNDEBUG")
+set(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-O2 -g -DNDEBUG")
+
+set(CMAKE_DEPFILE_FLAGS_CXX "-MD -MT <OBJECT> -MF <DEPFILE>")
+
+if("x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC")
+  set(_std -Qstd)
+else()
+  set(_std -std)
+endif()
+
+if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 15.0.2)
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "${_std}=c++14")
+  # todo: there is no gnu++14 value supported; figure out what to do
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "${_std}=c++14")
+elseif (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 15.0.0)
+  set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "${_std}=c++1y")
+  # todo: there is no gnu++14 value supported; figure out what to do
+  set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "${_std}=c++1y")
+endif()
+
+if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 13.0)
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "${_std}=c++11")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "${_std}=gnu++11")
+elseif (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 12.1)
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "${_std}=c++0x")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "${_std}=gnu++0x")
+endif()
+
+if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 12.1)
+  set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "${_std}=c++98")
+  set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "${_std}=gnu++98")
+endif()
+
+if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 12.1)
+  if (NOT CMAKE_CXX_COMPILER_FORCED)
+    if (NOT CMAKE_CXX_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_CXX_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_CXX_COMPILER_ID} (${CMAKE_CXX_COMPILER}) version ${CMAKE_CXX_COMPILER_VERSION}")
+    else()
+      set(CMAKE_CXX_STANDARD_DEFAULT ${CMAKE_CXX_STANDARD_COMPUTED_DEFAULT})
+    endif()
+  elseif (NOT CMAKE_CXX_STANDARD_COMPUTED_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    set(CMAKE_CXX_STANDARD_DEFAULT 98)
+  endif()
+endif()
+
+unset(_std)
+
+macro(cmake_record_cxx_compile_features)
+  macro(_get_intel_features std_version list)
+    record_compiler_features(CXX "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC" AND
+      NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 12.1)
+    if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 15.0)
+      _get_intel_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_intel_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
+    endif()
+    if (_result EQUAL 0)
+      _get_intel_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
+
+set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/Intel-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Intel-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Intel-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Intel-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/Intel-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/Intel-Fortran.cmake
new file mode 100644
index 0000000..671d284
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/Intel-Fortran.cmake
@@ -0,0 +1,12 @@
+set(CMAKE_Fortran_FLAGS_INIT "")
+set(CMAKE_Fortran_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "-Os")
+set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-O3")
+set(CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "-O2 -g")
+set(CMAKE_Fortran_MODDIR_FLAG "-module ")
+set(CMAKE_Fortran_VERBOSE_FLAG "-v")
+set(CMAKE_Fortran_FORMAT_FIXED_FLAG "-fixed")
+set(CMAKE_Fortran_FORMAT_FREE_FLAG "-free")
+
+set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/MIPSpro-C.cmake b/share/cmake-3.6/Modules/Compiler/MIPSpro-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/MIPSpro-C.cmake
rename to share/cmake-3.6/Modules/Compiler/MIPSpro-C.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/MIPSpro-CXX.cmake b/share/cmake-3.6/Modules/Compiler/MIPSpro-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/MIPSpro-CXX.cmake
rename to share/cmake-3.6/Modules/Compiler/MIPSpro-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/MIPSpro-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/MIPSpro-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/MIPSpro-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/MIPSpro-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/MIPSpro-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/MIPSpro-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/MIPSpro-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/MIPSpro-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/MSVC-CXX-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/MSVC-CXX-FeatureTests.cmake
new file mode 100644
index 0000000..79d5962
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/MSVC-CXX-FeatureTests.cmake
@@ -0,0 +1,114 @@
+
+# Reference: http://msdn.microsoft.com/en-us/library/vstudio/hh567368.aspx
+# http://blogs.msdn.com/b/vcblog/archive/2013/06/28/c-11-14-stl-features-fixes-and-breaking-changes-in-vs-2013.aspx
+# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
+# http://www.visualstudio.com/en-us/news/vs2015-preview-vs.aspx
+# http://blogs.msdn.com/b/vcblog/archive/2015/04/29/c-11-14-17-features-in-vs-2015-rc.aspx
+# http://blogs.msdn.com/b/vcblog/archive/2015/06/19/c-11-14-17-features-in-vs-2015-rtm.aspx
+
+
+set(_cmake_oldestSupported "_MSC_VER >= 1600")
+
+# VS 2015 Update 2 introduces support for variable templates.
+# https://www.visualstudio.com/en-us/news/vs2015-update2-vs.aspx
+set(_cmake_feature_test_cxx_variable_templates "_MSC_FULL_VER >= 190023918")
+
+set(MSVC_2015 "_MSC_VER >= 1900")
+set(_cmake_feature_test_cxx_alignas "${MSVC_2015}")
+set(_cmake_feature_test_cxx_alignof "${MSVC_2015}")
+set(_cmake_feature_test_cxx_attributes "${MSVC_2015}")
+set(_cmake_feature_test_cxx_attribute_deprecated "${MSVC_2015}")
+set(_cmake_feature_test_cxx_binary_literals "${MSVC_2015}")
+set(_cmake_feature_test_cxx_constexpr "${MSVC_2015}")
+set(_cmake_feature_test_cxx_decltype_auto "${MSVC_2015}")
+set(_cmake_feature_test_cxx_digit_separators "${MSVC_2015}")
+set(_cmake_feature_test_cxx_func_identifier "${MSVC_2015}")
+set(_cmake_feature_test_cxx_nonstatic_member_init "${MSVC_2015}")
+# Microsoft calls this 'rvalue references v3'
+set(_cmake_feature_test_cxx_defaulted_move_initializers "${MSVC_2015}")
+set(_cmake_feature_test_cxx_generic_lambdas "${MSVC_2015}")
+set(_cmake_feature_test_cxx_inheriting_constructors "${MSVC_2015}")
+set(_cmake_feature_test_cxx_inline_namespaces "${MSVC_2015}")
+set(_cmake_feature_test_cxx_lambda_init_captures "${MSVC_2015}")
+set(_cmake_feature_test_cxx_noexcept "${MSVC_2015}")
+set(_cmake_feature_test_cxx_return_type_deduction "${MSVC_2015}")
+set(_cmake_feature_test_cxx_sizeof_member "${MSVC_2015}")
+set(_cmake_feature_test_cxx_thread_local "${MSVC_2015}")
+set(_cmake_feature_test_cxx_unicode_literals "${MSVC_2015}")
+set(_cmake_feature_test_cxx_unrestricted_unions "${MSVC_2015}")
+set(_cmake_feature_test_cxx_user_literals "${MSVC_2015}")
+set(_cmake_feature_test_cxx_reference_qualified_functions "${MSVC_2015}")
+# "The copies and moves don't interact precisely like the Standard says they
+# should. For example, deletion of moves is specified to also suppress
+# copies, but Visual C++ in Visual Studio 2013 does not."
+# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
+# lists this as 'partial' in 2013
+set(_cmake_feature_test_cxx_deleted_functions "${MSVC_2015}")
+
+set(MSVC_2013_v30723 "_MSC_FULL_VER >= 180030723")
+# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
+# Note 1. While previous version of VisualStudio said they supported these
+# they silently produced bad code, and are now marked as having partial
+# support in previous versions. The footnote says the support will be complete
+# in MSVC 2015, so support the feature for that version, assuming that is true.
+# The blog post also says that VS 2013 Update 3 generates an error in cases
+# that previously produced bad code.
+set(_cmake_feature_test_cxx_generalized_initializers "${MSVC_2013_v30723}")
+
+set(MSVC_2013 "_MSC_VER >= 1800")
+set(_cmake_feature_test_cxx_alias_templates "${MSVC_2013}")
+# Microsoft now states they support contextual conversions in 2013 and above.
+# See footnote 6 at:
+# http://blogs.msdn.com/b/vcblog/archive/2014/11/17/c-11-14-17-features-in-vs-2015-preview.aspx
+set(_cmake_feature_test_cxx_contextual_conversions "${MSVC_2013}")
+set(_cmake_feature_test_cxx_default_function_template_args "${MSVC_2013}")
+set(_cmake_feature_test_cxx_defaulted_functions "${MSVC_2013}")
+set(_cmake_feature_test_cxx_delegating_constructors "${MSVC_2013}")
+set(_cmake_feature_test_cxx_explicit_conversions "${MSVC_2013}")
+set(_cmake_feature_test_cxx_raw_string_literals "${MSVC_2013}")
+set(_cmake_feature_test_cxx_uniform_initialization "${MSVC_2013}")
+# Support is documented, but possibly partly broken:
+# https://msdn.microsoft.com/en-us/library/hh567368.aspx
+# http://thread.gmane.org/gmane.comp.lib.boost.devel/244986/focus=245333
+set(_cmake_feature_test_cxx_variadic_templates "${MSVC_2013}")
+
+set(MSVC_2012 "_MSC_VER >= 1700")
+set(_cmake_feature_test_cxx_enum_forward_declarations "${MSVC_2012}")
+set(_cmake_feature_test_cxx_final "${MSVC_2012}")
+set(_cmake_feature_test_cxx_range_for "${MSVC_2012}")
+set(_cmake_feature_test_cxx_strong_enums "${MSVC_2012}")
+
+set(MSVC_2010 "_MSC_VER >= 1600")
+set(_cmake_feature_test_cxx_auto_type "${MSVC_2010}")
+set(_cmake_feature_test_cxx_decltype "${MSVC_2010}")
+set(_cmake_feature_test_cxx_extended_friend_declarations "${MSVC_2010}")
+set(_cmake_feature_test_cxx_extern_templates "${MSVC_2010}")
+set(_cmake_feature_test_cxx_lambdas "${MSVC_2010}")
+set(_cmake_feature_test_cxx_local_type_template_args "${MSVC_2010}")
+set(_cmake_feature_test_cxx_long_long_type "${MSVC_2010}")
+set(_cmake_feature_test_cxx_nullptr "${MSVC_2010}")
+set(_cmake_feature_test_cxx_override "${MSVC_2010}")
+set(_cmake_feature_test_cxx_right_angle_brackets "${MSVC_2010}")
+set(_cmake_feature_test_cxx_rvalue_references "${MSVC_2010}")
+set(_cmake_feature_test_cxx_static_assert "${MSVC_2010}")
+set(_cmake_feature_test_cxx_template_template_parameters "${MSVC_2010}")
+set(_cmake_feature_test_cxx_trailing_return_types "${MSVC_2010}")
+set(_cmake_feature_test_cxx_variadic_macros "${MSVC_2010}")
+
+# Currently unsupported:
+# set(_cmake_feature_test_cxx_relaxed_constexpr )
+# 'NSDMIs for aggregates'
+# set(_cmake_feature_test_cxx_aggregate_default_initializers )
+
+# In theory decltype incomplete return types was added in 2012
+# but without support for decltype_auto and return type deduction this
+# feature is unusable.  This remains so as of VS 2015 Preview.
+# set(_cmake_feature_test_cxx_decltype_incomplete_return_types )
+
+# Unset all the variables that we don't need exposed.
+# _cmake_oldestSupported is required by WriteCompilerDetectionHeader
+set(MSVC_2015)
+set(MSVC_2013_v30723)
+set(MSVC_2013)
+set(MSVC_2012)
+set(MSVC_2010)
diff --git a/share/cmake-3.2/Modules/Compiler/MSVC-CXX.cmake b/share/cmake-3.6/Modules/Compiler/MSVC-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/MSVC-CXX.cmake
rename to share/cmake-3.6/Modules/Compiler/MSVC-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/MSVC-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/MSVC-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/MSVC-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/MSVC-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/NAG-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/NAG-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/NAG-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/NAG-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/OpenWatcom-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/OpenWatcom-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/OpenWatcom-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/OpenWatcom-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PGI-C.cmake b/share/cmake-3.6/Modules/Compiler/PGI-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PGI-C.cmake
rename to share/cmake-3.6/Modules/Compiler/PGI-C.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PGI-CXX.cmake b/share/cmake-3.6/Modules/Compiler/PGI-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PGI-CXX.cmake
rename to share/cmake-3.6/Modules/Compiler/PGI-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PGI-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/PGI-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PGI-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/PGI-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PGI-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/PGI-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PGI-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/PGI-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/PGI.cmake b/share/cmake-3.6/Modules/Compiler/PGI.cmake
new file mode 100644
index 0000000..797945f
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/PGI.cmake
@@ -0,0 +1,35 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__COMPILER_PGI)
+  return()
+endif()
+set(__COMPILER_PGI 1)
+
+macro(__compiler_pgi lang)
+  # Feature flags.
+  set(CMAKE_${lang}_VERBOSE_FLAG "-v")
+
+  # Initial configuration flags.
+  set(CMAKE_${lang}_FLAGS_INIT "")
+  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-g -O0")
+  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-O2 -s")
+  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-fast -O3 -Mipa=fast")
+  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-O2 -gopt")
+
+  # Preprocessing and assembly rules.
+  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/PathScale-C.cmake b/share/cmake-3.6/Modules/Compiler/PathScale-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PathScale-C.cmake
rename to share/cmake-3.6/Modules/Compiler/PathScale-C.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PathScale-CXX.cmake b/share/cmake-3.6/Modules/Compiler/PathScale-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PathScale-CXX.cmake
rename to share/cmake-3.6/Modules/Compiler/PathScale-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PathScale-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/PathScale-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PathScale-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/PathScale-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PathScale-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/PathScale-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PathScale-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/PathScale-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/PathScale.cmake b/share/cmake-3.6/Modules/Compiler/PathScale.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/PathScale.cmake
rename to share/cmake-3.6/Modules/Compiler/PathScale.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/QCC-C.cmake b/share/cmake-3.6/Modules/Compiler/QCC-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/QCC-C.cmake
rename to share/cmake-3.6/Modules/Compiler/QCC-C.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/QCC-CXX.cmake b/share/cmake-3.6/Modules/Compiler/QCC-CXX.cmake
new file mode 100644
index 0000000..e86d1fa
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/QCC-CXX.cmake
@@ -0,0 +1,12 @@
+include(Compiler/QCC)
+__compiler_qcc(CXX)
+
+# If the toolchain uses qcc for CMAKE_CXX_COMPILER instead of QCC, the
+# default for the driver is not c++.
+set(CMAKE_CXX_COMPILE_OBJECT
+  "<CMAKE_CXX_COMPILER> -lang-c++ <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
+
+set(CMAKE_CXX_LINK_EXECUTABLE
+  "<CMAKE_CXX_COMPILER> -lang-c++ <FLAGS> <CMAKE_CXX_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+
+set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden")
diff --git a/share/cmake-3.6/Modules/Compiler/QCC.cmake b/share/cmake-3.6/Modules/Compiler/QCC.cmake
new file mode 100644
index 0000000..f69c7bd
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/QCC.cmake
@@ -0,0 +1,24 @@
+
+#=============================================================================
+# Copyright 2002-2014 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+include(Compiler/GNU)
+
+macro(__compiler_qcc lang)
+  __compiler_gnu(${lang})
+
+  # http://www.qnx.com/developers/docs/6.4.0/neutrino/utilities/q/qcc.html#examples
+  set(CMAKE_${lang}_COMPILE_OPTIONS_TARGET "-V")
+
+  set(CMAKE_INCLUDE_SYSTEM_FLAG_${lang} "-Wp,-isystem,")
+  set(CMAKE_DEPFILE_FLAGS_${lang} "-Wc,-MD,<DEPFILE>,-MT,<OBJECT>,-MF,<DEPFILE>")
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/SCO-C.cmake b/share/cmake-3.6/Modules/Compiler/SCO-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SCO-C.cmake
rename to share/cmake-3.6/Modules/Compiler/SCO-C.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/SCO-CXX.cmake b/share/cmake-3.6/Modules/Compiler/SCO-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SCO-CXX.cmake
rename to share/cmake-3.6/Modules/Compiler/SCO-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/SCO-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/SCO-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SCO-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/SCO-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/SCO.cmake b/share/cmake-3.6/Modules/Compiler/SCO.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SCO.cmake
rename to share/cmake-3.6/Modules/Compiler/SCO.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/SDCC-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/SDCC-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SDCC-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/SDCC-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/SunPro-ASM.cmake b/share/cmake-3.6/Modules/Compiler/SunPro-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SunPro-ASM.cmake
rename to share/cmake-3.6/Modules/Compiler/SunPro-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/SunPro-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/SunPro-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SunPro-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/SunPro-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/SunPro-C.cmake b/share/cmake-3.6/Modules/Compiler/SunPro-C.cmake
new file mode 100644
index 0000000..c452983
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/SunPro-C.cmake
@@ -0,0 +1,26 @@
+set(CMAKE_C_VERBOSE_FLAG "-#")
+
+set(CMAKE_C_COMPILE_OPTIONS_PIC -KPIC)
+set(CMAKE_SHARED_LIBRARY_C_FLAGS "-KPIC")
+set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-G")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-R")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":")
+set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-h")
+
+set(CMAKE_C_FLAGS_INIT "")
+set(CMAKE_C_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_C_FLAGS_MINSIZEREL_INIT "-xO2 -xspace -DNDEBUG")
+set(CMAKE_C_FLAGS_RELEASE_INIT "-xO3 -DNDEBUG")
+set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "-g -xO2 -DNDEBUG")
+
+# Initialize C link type selection flags.  These flags are used when
+# building a shared library, shared module, or executable that links
+# to other libraries to select whether to use the static or shared
+# versions of the libraries.
+foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-Bstatic")
+  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-Bdynamic")
+endforeach()
+
+set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/SunPro-CXX-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/SunPro-CXX-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SunPro-CXX-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/SunPro-CXX-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/SunPro-CXX-FeatureTests.cmake b/share/cmake-3.6/Modules/Compiler/SunPro-CXX-FeatureTests.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/SunPro-CXX-FeatureTests.cmake
rename to share/cmake-3.6/Modules/Compiler/SunPro-CXX-FeatureTests.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/SunPro-CXX.cmake b/share/cmake-3.6/Modules/Compiler/SunPro-CXX.cmake
new file mode 100644
index 0000000..b4a5591
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/SunPro-CXX.cmake
@@ -0,0 +1,63 @@
+set(CMAKE_CXX_VERBOSE_FLAG "-v")
+
+set(CMAKE_CXX_COMPILE_OPTIONS_PIC -KPIC)
+set(CMAKE_SHARED_LIBRARY_CXX_FLAGS "-KPIC")
+set(CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS "-G")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG "-R")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP ":")
+set(CMAKE_SHARED_LIBRARY_SONAME_CXX_FLAG "-h")
+
+set(CMAKE_CXX_FLAGS_INIT "")
+set(CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "-xO2 -xspace -DNDEBUG")
+set(CMAKE_CXX_FLAGS_RELEASE_INIT "-xO3 -DNDEBUG")
+set(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-g -xO2 -DNDEBUG")
+
+# Initialize C link type selection flags.  These flags are used when
+# building a shared library, shared module, or executable that links
+# to other libraries to select whether to use the static or shared
+# versions of the libraries.
+foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+  set(CMAKE_${type}_LINK_STATIC_CXX_FLAGS "-Bstatic")
+  set(CMAKE_${type}_LINK_DYNAMIC_CXX_FLAGS "-Bdynamic")
+endforeach()
+
+set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+
+# Create archives with "CC -xar" in case user adds "-instances=extern"
+# so that template instantiations are available to archive members.
+set(CMAKE_CXX_CREATE_STATIC_LIBRARY
+  "<CMAKE_CXX_COMPILER> -xar -o <TARGET> <OBJECTS> "
+  "<CMAKE_RANLIB> <TARGET> ")
+
+if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.13)
+  set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11")
+  set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=c++11")
+endif()
+
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.13)
+  if (NOT CMAKE_CXX_COMPILER_FORCED)
+    if (NOT CMAKE_CXX_STANDARD_COMPUTED_DEFAULT)
+      message(FATAL_ERROR "CMAKE_CXX_STANDARD_COMPUTED_DEFAULT should be set for ${CMAKE_CXX_COMPILER_ID} (${CMAKE_CXX_COMPILER}) version ${CMAKE_CXX_COMPILER_VERSION}")
+    endif()
+    set(CMAKE_CXX_STANDARD_DEFAULT ${CMAKE_CXX_STANDARD_COMPUTED_DEFAULT})
+  elseif(NOT DEFINED CMAKE_CXX_STANDARD_DEFAULT)
+    # Compiler id was forced so just guess the default standard level.
+    set(CMAKE_CXX_STANDARD_DEFAULT 98)
+  endif()
+endif()
+
+macro(cmake_record_cxx_compile_features)
+  macro(_get_solaris_studio_features std_version list)
+    record_compiler_features(CXX "${std_version}" ${list})
+  endmacro()
+
+  set(_result 0)
+  if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 5.13)
+    _get_solaris_studio_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES)
+    if (_result EQUAL 0)
+      _get_solaris_studio_features("" CMAKE_CXX98_COMPILE_FEATURES)
+    endif()
+  endif()
+endmacro()
diff --git a/share/cmake-3.6/Modules/Compiler/SunPro-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/SunPro-Fortran.cmake
new file mode 100644
index 0000000..610e191
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/SunPro-Fortran.cmake
@@ -0,0 +1,22 @@
+set(CMAKE_Fortran_VERBOSE_FLAG "-v")
+set(CMAKE_Fortran_FORMAT_FIXED_FLAG "-fixed")
+set(CMAKE_Fortran_FORMAT_FREE_FLAG "-free")
+
+set(CMAKE_Fortran_COMPILE_OPTIONS_PIC "-KPIC")
+set(CMAKE_SHARED_LIBRARY_Fortran_FLAGS "-KPIC")
+set(CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS "-G")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG "-R")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP ":")
+set(CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG "-h")
+set(CMAKE_EXECUTABLE_RUNTIME_Fortran_FLAG "-R")
+
+set(CMAKE_Fortran_FLAGS_INIT "")
+set(CMAKE_Fortran_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "-xO2 -xspace -DNDEBUG")
+set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-xO3 -DNDEBUG")
+set(CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "-g -xO2 -DNDEBUG")
+set(CMAKE_Fortran_MODDIR_FLAG "-moddir=")
+set(CMAKE_Fortran_MODPATH_FLAG "-M")
+
+set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -F <SOURCE> -o <PREPROCESSED_SOURCE>")
+set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.6/Modules/Compiler/TI-ASM.cmake b/share/cmake-3.6/Modules/Compiler/TI-ASM.cmake
new file mode 100644
index 0000000..a566d70
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/TI-ASM.cmake
@@ -0,0 +1,8 @@
+set(CMAKE_LIBRARY_PATH_FLAG "--search_path=")
+set(CMAKE_LINK_LIBRARY_FLAG "--library=")
+set(CMAKE_INCLUDE_FLAG_ASM "--include_path=")
+
+set(CMAKE_ASM_COMPILE_OBJECT  "<CMAKE_ASM_COMPILER> --compile_only --asm_file=<SOURCE> <DEFINES> <INCLUDES> <FLAGS> --output_file=<OBJECT>")
+set(CMAKE_ASM_LINK_EXECUTABLE "<CMAKE_ASM_COMPILER> <OBJECTS> --run_linker --output_file=<TARGET> <CMAKE_ASM_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>")
+
+set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS asm;s;abs)
diff --git a/share/cmake-3.6/Modules/Compiler/TI-C.cmake b/share/cmake-3.6/Modules/Compiler/TI-C.cmake
new file mode 100644
index 0000000..ebc79f4
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/TI-C.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_LIBRARY_PATH_FLAG "--search_path=")
+set(CMAKE_LINK_LIBRARY_FLAG "--library=")
+set(CMAKE_INCLUDE_FLAG_C "--include_path=")
+
+set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> --compile_only --skip_assembler --c_file=<SOURCE> <DEFINES> <INCLUDES> <FLAGS> --output_file=<ASSEMBLY_SOURCE>")
+set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> --preproc_only --c_file=<SOURCE> <DEFINES> <INCLUDES> <FLAGS> --output_file=<PREPROCESSED_SOURCE>")
+
+set(CMAKE_C_COMPILE_OBJECT  "<CMAKE_C_COMPILER> --compile_only --c_file=<SOURCE> <DEFINES> <INCLUDES> <FLAGS> --output_file=<OBJECT>")
+set(CMAKE_C_ARCHIVE_CREATE "<CMAKE_AR> -r <TARGET> <OBJECTS>")
+set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_C_COMPILER> --run_linker --output_file=<TARGET> --map_file=<TARGET>.map <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <OBJECTS> <LINK_LIBRARIES>")
diff --git a/share/cmake-3.6/Modules/Compiler/TI-CXX.cmake b/share/cmake-3.6/Modules/Compiler/TI-CXX.cmake
new file mode 100644
index 0000000..4104c3b
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/TI-CXX.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_LIBRARY_PATH_FLAG "--search_path=")
+set(CMAKE_LINK_LIBRARY_FLAG "--library=")
+set(CMAKE_INCLUDE_FLAG_CXX "--include_path=")
+
+set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE "<CMAKE_CXX_COMPILER> --compile_only --skip_assembler --cpp_file=<SOURCE> <DEFINES> <INCLUDES> <FLAGS> --output_file=<ASSEMBLY_SOURCE>")
+set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> --preproc_only --cpp_file=<SOURCE> <DEFINES> <INCLUDES> <FLAGS> --output_file=<PREPROCESSED_SOURCE>")
+
+set(CMAKE_CXX_COMPILE_OBJECT  "<CMAKE_CXX_COMPILER> --compile_only --cpp_file=<SOURCE> <DEFINES> <INCLUDES> <FLAGS> --output_file=<OBJECT>")
+set(CMAKE_CXX_ARCHIVE_CREATE "<CMAKE_AR> -r <TARGET> <OBJECTS>")
+set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_CXX_COMPILER> --run_linker --output_file=<TARGET> --map_file=<TARGET>.map <CMAKE_CXX_LINK_FLAGS> <LINK_LIBRARIES> <LINK_FLAGS> <OBJECTS>")
diff --git a/share/cmake-3.2/Modules/Compiler/TI-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/TI-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/TI-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/TI-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/TinyCC-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/TinyCC-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/TinyCC-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/TinyCC-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/TinyCC-C.cmake b/share/cmake-3.6/Modules/Compiler/TinyCC-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/TinyCC-C.cmake
rename to share/cmake-3.6/Modules/Compiler/TinyCC-C.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/VisualAge-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/VisualAge-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/VisualAge-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/VisualAge-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/VisualAge-C.cmake b/share/cmake-3.6/Modules/Compiler/VisualAge-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/VisualAge-C.cmake
rename to share/cmake-3.6/Modules/Compiler/VisualAge-C.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/VisualAge-CXX-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/VisualAge-CXX-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/VisualAge-CXX-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/VisualAge-CXX-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/VisualAge-CXX.cmake b/share/cmake-3.6/Modules/Compiler/VisualAge-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/VisualAge-CXX.cmake
rename to share/cmake-3.6/Modules/Compiler/VisualAge-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/VisualAge-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/VisualAge-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/VisualAge-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/VisualAge-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/Watcom-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/Watcom-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/Watcom-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/Watcom-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/XL-ASM.cmake b/share/cmake-3.6/Modules/Compiler/XL-ASM.cmake
new file mode 100644
index 0000000..212179e
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/XL-ASM.cmake
@@ -0,0 +1,12 @@
+set(CMAKE_ASM_VERBOSE_FLAG "-V")
+
+# -qthreaded     = Ensures that all optimizations will be thread-safe
+# -qhalt=e       = Halt on error messages (rather than just severe errors)
+set(CMAKE_ASM_FLAGS_INIT "-qthreaded -qhalt=e -qsourcetype=assembler")
+
+set(CMAKE_ASM_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_ASM_FLAGS_RELEASE_INIT "-O -DNDEBUG")
+set(CMAKE_ASM_FLAGS_MINSIZEREL_INIT "-O -DNDEBUG")
+set(CMAKE_ASM_FLAGS_RELWITHDEBINFO_INIT "-g -DNDEBUG")
+
+set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS s )
diff --git a/share/cmake-3.2/Modules/Compiler/XL-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/XL-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/XL-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/XL-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/XL-C.cmake b/share/cmake-3.6/Modules/Compiler/XL-C.cmake
new file mode 100644
index 0000000..97dd017
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/XL-C.cmake
@@ -0,0 +1,8 @@
+include(Compiler/XL)
+__compiler_xl(C)
+set(CMAKE_C_FLAGS_RELEASE_INIT "${CMAKE_C_FLAGS_RELEASE_INIT} -DNDEBUG")
+set(CMAKE_C_FLAGS_MINSIZEREL_INIT "${CMAKE_C_FLAGS_MINSIZEREL_INIT} -DNDEBUG")
+
+# -qthreaded     = Ensures that all optimizations will be thread-safe
+# -qhalt=e       = Halt on error messages (rather than just severe errors)
+set(CMAKE_C_FLAGS_INIT "-qthreaded -qhalt=e")
diff --git a/share/cmake-3.2/Modules/Compiler/XL-CXX-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/XL-CXX-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/XL-CXX-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/XL-CXX-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/XL-CXX.cmake b/share/cmake-3.6/Modules/Compiler/XL-CXX.cmake
new file mode 100644
index 0000000..41372c1
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/XL-CXX.cmake
@@ -0,0 +1,11 @@
+include(Compiler/XL)
+__compiler_xl(CXX)
+set(CMAKE_CXX_FLAGS_RELEASE_INIT "${CMAKE_CXX_FLAGS_RELEASE_INIT} -DNDEBUG")
+set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "${CMAKE_CXX_FLAGS_MINSIZEREL_INIT} -DNDEBUG")
+
+# -qthreaded     = Ensures that all optimizations will be thread-safe
+# -qhalt=e       = Halt on error messages (rather than just severe errors)
+set(CMAKE_CXX_FLAGS_INIT "-qthreaded -qhalt=e")
+
+set(CMAKE_CXX_COMPILE_OBJECT
+  "<CMAKE_CXX_COMPILER> -+ <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
diff --git a/share/cmake-3.2/Modules/Compiler/XL-Fortran.cmake b/share/cmake-3.6/Modules/Compiler/XL-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/XL-Fortran.cmake
rename to share/cmake-3.6/Modules/Compiler/XL-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Compiler/XL.cmake b/share/cmake-3.6/Modules/Compiler/XL.cmake
new file mode 100644
index 0000000..bf4f554
--- /dev/null
+++ b/share/cmake-3.6/Modules/Compiler/XL.cmake
@@ -0,0 +1,54 @@
+
+#=============================================================================
+# Copyright 2002-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__COMPILER_XL)
+  return()
+endif()
+set(__COMPILER_XL 1)
+
+# Find the CreateExportList program that comes with this toolchain.
+find_program(CMAKE_XL_CreateExportList
+  NAMES CreateExportList
+  DOC "IBM XL CreateExportList tool"
+  )
+
+macro(__compiler_xl lang)
+  # Feature flags.
+  set(CMAKE_${lang}_VERBOSE_FLAG "-V")
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "-qpic")
+
+  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-g")
+  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-O")
+  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-O")
+  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-g")
+  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE     "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+
+  # CMAKE_XL_CreateExportList is part of the AIX XL compilers but not the linux ones.
+  # If we found the tool, we'll use it to create exports, otherwise stick with the regular
+  # create shared library compile line.
+  if (CMAKE_XL_CreateExportList)
+    # The compiler front-end passes all object files, archive files, and shared
+    # library files named on the command line to CreateExportList to create a
+    # list of all symbols to be exported from the shared library.  This causes
+    # all archive members to be copied into the shared library whether they are
+    # needed or not.  Instead we run the tool ourselves to pass only the object
+    # files so that we export only the symbols actually provided by the sources.
+    set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
+      "${CMAKE_XL_CreateExportList} <OBJECT_DIR>/objects.exp <OBJECTS>"
+      "<CMAKE_${lang}_COMPILER> <CMAKE_SHARED_LIBRARY_${lang}_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS> -Wl,-bE:<OBJECT_DIR>/objects.exp <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>"
+      )
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Compiler/zOS-C-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/zOS-C-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/zOS-C-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/zOS-C-DetermineCompiler.cmake
diff --git a/share/cmake-3.2/Modules/Compiler/zOS-CXX-DetermineCompiler.cmake b/share/cmake-3.6/Modules/Compiler/zOS-CXX-DetermineCompiler.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Compiler/zOS-CXX-DetermineCompiler.cmake
rename to share/cmake-3.6/Modules/Compiler/zOS-CXX-DetermineCompiler.cmake
diff --git a/share/cmake-3.6/Modules/CompilerId/VS-10.vcxproj.in b/share/cmake-3.6/Modules/CompilerId/VS-10.vcxproj.in
new file mode 100644
index 0000000..2870a11
--- /dev/null
+++ b/share/cmake-3.6/Modules/CompilerId/VS-10.vcxproj.in
@@ -0,0 +1,56 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|@id_platform@">
+      <Configuration>Debug</Configuration>
+      <Platform>@id_platform@</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{CAE07175-D007-4FC3-BFE8-47B392814159}</ProjectGuid>
+    <RootNamespace>CompilerId@id_lang@</RootNamespace>
+    <Keyword>Win32Proj</Keyword>
+    @id_system@
+    @id_system_version@
+    @id_WindowsTargetPlatformVersion@
+    @id_WindowsSDKDesktopARMSupport@
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    @id_toolset@
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">.\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">false</LinkIncremental>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|@id_platform@'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>false</MinimalRebuild>
+      <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <WarningLevel>TurnOffAllWarnings</WarningLevel>
+      <DebugInformationFormat>
+      </DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <GenerateDebugInformation>false</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Command>for %%i in (@id_cl@) do %40echo CMAKE_@id_lang@_COMPILER=%%~$PATH:i</Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="@id_src@" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+</Project>
diff --git a/share/cmake-3.2/Modules/CompilerId/VS-7.vcproj.in b/share/cmake-3.6/Modules/CompilerId/VS-7.vcproj.in
similarity index 100%
rename from share/cmake-3.2/Modules/CompilerId/VS-7.vcproj.in
rename to share/cmake-3.6/Modules/CompilerId/VS-7.vcproj.in
diff --git a/share/cmake-3.2/Modules/CompilerId/VS-Intel.vfproj.in b/share/cmake-3.6/Modules/CompilerId/VS-Intel.vfproj.in
similarity index 100%
rename from share/cmake-3.2/Modules/CompilerId/VS-Intel.vfproj.in
rename to share/cmake-3.6/Modules/CompilerId/VS-Intel.vfproj.in
diff --git a/share/cmake-3.2/Modules/CompilerId/VS-NsightTegra.vcxproj.in b/share/cmake-3.6/Modules/CompilerId/VS-NsightTegra.vcxproj.in
similarity index 100%
rename from share/cmake-3.2/Modules/CompilerId/VS-NsightTegra.vcxproj.in
rename to share/cmake-3.6/Modules/CompilerId/VS-NsightTegra.vcxproj.in
diff --git a/share/cmake-3.2/Modules/CompilerId/Xcode-1.pbxproj.in b/share/cmake-3.6/Modules/CompilerId/Xcode-1.pbxproj.in
similarity index 100%
rename from share/cmake-3.2/Modules/CompilerId/Xcode-1.pbxproj.in
rename to share/cmake-3.6/Modules/CompilerId/Xcode-1.pbxproj.in
diff --git a/share/cmake-3.2/Modules/CompilerId/Xcode-2.pbxproj.in b/share/cmake-3.6/Modules/CompilerId/Xcode-2.pbxproj.in
similarity index 100%
rename from share/cmake-3.2/Modules/CompilerId/Xcode-2.pbxproj.in
rename to share/cmake-3.6/Modules/CompilerId/Xcode-2.pbxproj.in
diff --git a/share/cmake-3.6/Modules/CompilerId/Xcode-3.pbxproj.in b/share/cmake-3.6/Modules/CompilerId/Xcode-3.pbxproj.in
new file mode 100644
index 0000000..20f3da3
--- /dev/null
+++ b/share/cmake-3.6/Modules/CompilerId/Xcode-3.pbxproj.in
@@ -0,0 +1,110 @@
+// !$*UTF8*$!
+{
+	archiveVersion = 1;
+	classes = {
+	};
+	objectVersion = 45;
+	objects = {
+
+		2C18F0B615DC1E0300593670 = {isa = PBXBuildFile; fileRef = 2C18F0B415DC1DC700593670; };
+		2C18F0B415DC1DC700593670 = {isa = PBXFileReference; fileEncoding = 4; explicitFileType = @id_type@; path = @id_src@; sourceTree = "<group>"; };
+		08FB7794FE84155DC02AAC07 = {
+			isa = PBXGroup;
+			children = (
+				2C18F0B415DC1DC700593670,
+			);
+			name = CompilerId@id_lang@;
+			sourceTree = "<group>";
+		};
+		8DD76FA90486AB0100D96B5E = {
+			isa = PBXNativeTarget;
+			buildConfigurationList = 1DEB928508733DD80010E9CD;
+			buildPhases = (
+				2C18F0B515DC1DCE00593670,
+				2C8FEB8E15DC1A1A00E56A5D,
+			);
+			buildRules = (
+			);
+			dependencies = (
+			);
+			name = CompilerId@id_lang@;
+			productName = CompilerId@id_lang@;
+			productType = "@id_product_type@";
+		};
+		08FB7793FE84155DC02AAC07 = {
+			isa = PBXProject;
+			buildConfigurationList = 1DEB928908733DD80010E9CD;
+			compatibilityVersion = "Xcode 3.1";
+			developmentRegion = English;
+			hasScannedForEncodings = 1;
+			knownRegions = (
+				en,
+			);
+			mainGroup = 08FB7794FE84155DC02AAC07;
+			projectDirPath = "";
+			projectRoot = "";
+			targets = (
+				8DD76FA90486AB0100D96B5E,
+			);
+		};
+		2C8FEB8E15DC1A1A00E56A5D = {
+			isa = PBXShellScriptBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputPaths = (
+			);
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /bin/sh;
+			shellScript = "echo \"GCC_VERSION=$GCC_VERSION\"";
+			showEnvVarsInLog = 0;
+		};
+		2C18F0B515DC1DCE00593670 = {
+			isa = PBXSourcesBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				2C18F0B615DC1E0300593670,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+		1DEB928608733DD80010E9CD = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				PRODUCT_NAME = CompilerId@id_lang@;
+			};
+			name = Debug;
+		};
+		1DEB928A08733DD80010E9CD = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				ONLY_ACTIVE_ARCH = YES;
+				CODE_SIGNING_REQUIRED = NO;
+				CONFIGURATION_BUILD_DIR = "$(BUILD_DIR)";
+				SYMROOT = .;
+				@id_toolset@
+				@id_deployment_target@
+				@id_sdkroot@
+			};
+			name = Debug;
+		};
+		1DEB928508733DD80010E9CD = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				1DEB928608733DD80010E9CD,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Debug;
+		};
+		1DEB928908733DD80010E9CD = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				1DEB928A08733DD80010E9CD,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Debug;
+		};
+	};
+	rootObject = 08FB7793FE84155DC02AAC07;
+}
diff --git a/share/cmake-3.6/Modules/CompilerId/main.swift.in b/share/cmake-3.6/Modules/CompilerId/main.swift.in
new file mode 100644
index 0000000..13f0ba0
--- /dev/null
+++ b/share/cmake-3.6/Modules/CompilerId/main.swift.in
@@ -0,0 +1 @@
+print("CMakeSwiftCompilerId")
diff --git a/share/cmake-3.2/Modules/Dart.cmake b/share/cmake-3.6/Modules/Dart.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Dart.cmake
rename to share/cmake-3.6/Modules/Dart.cmake
diff --git a/share/cmake-3.6/Modules/DartConfiguration.tcl.in b/share/cmake-3.6/Modules/DartConfiguration.tcl.in
new file mode 100644
index 0000000..0ff2eed
--- /dev/null
+++ b/share/cmake-3.6/Modules/DartConfiguration.tcl.in
@@ -0,0 +1,112 @@
+# This file is configured by CMake automatically as DartConfiguration.tcl
+# If you choose not to use CMake, this file may be hand configured, by
+# filling in the required variables.
+
+
+# Configuration directories and files
+SourceDirectory: @PROJECT_SOURCE_DIR@
+BuildDirectory: @PROJECT_BINARY_DIR@
+
+# Where to place the cost data store
+CostDataFile: @CTEST_COST_DATA_FILE@
+
+# Site is something like machine.domain, i.e. pragmatic.crd
+Site: @SITE@
+
+# Build name is osname-revision-compiler, i.e. Linux-2.4.2-2smp-c++
+BuildName: @BUILDNAME@
+
+# Submission information
+IsCDash: @CTEST_DROP_SITE_CDASH@
+CDashVersion: @CTEST_CDASH_VERSION@
+QueryCDashVersion: @CTEST_CDASH_QUERY_VERSION@
+DropSite: @DROP_SITE@
+DropLocation: @DROP_LOCATION@
+DropSiteUser: @DROP_SITE_USER@
+DropSitePassword: @DROP_SITE_PASSWORD@
+DropSiteMode: @DROP_SITE_MODE@
+DropMethod: @DROP_METHOD@
+TriggerSite: @TRIGGER_SITE@
+ScpCommand: @SCPCOMMAND@
+
+# Dashboard start time
+NightlyStartTime: @NIGHTLY_START_TIME@
+
+# Commands for the build/test/submit cycle
+ConfigureCommand: "@CMAKE_COMMAND@" "@PROJECT_SOURCE_DIR@"
+MakeCommand: @MAKECOMMAND@
+DefaultCTestConfigurationType: @DEFAULT_CTEST_CONFIGURATION_TYPE@
+
+# version control
+UpdateVersionOnly: @CTEST_UPDATE_VERSION_ONLY@
+
+# CVS options
+# Default is "-d -P -A"
+CVSCommand: @CVSCOMMAND@
+CVSUpdateOptions: @CVS_UPDATE_OPTIONS@
+
+# Subversion options
+SVNCommand: @SVNCOMMAND@
+SVNOptions: @CTEST_SVN_OPTIONS@
+SVNUpdateOptions: @SVN_UPDATE_OPTIONS@
+
+# Git options
+GITCommand: @GITCOMMAND@
+GITInitSubmodules: @CTEST_GIT_INIT_SUBMODULES@
+GITUpdateOptions: @GIT_UPDATE_OPTIONS@
+GITUpdateCustom: @CTEST_GIT_UPDATE_CUSTOM@
+
+# Perforce options
+P4Command: @P4COMMAND@
+P4Client: @CTEST_P4_CLIENT@
+P4Options: @CTEST_P4_OPTIONS@
+P4UpdateOptions: @CTEST_P4_UPDATE_OPTIONS@
+P4UpdateCustom: @CTEST_P4_UPDATE_CUSTOM@
+
+# Generic update command
+UpdateCommand: @UPDATE_COMMAND@
+UpdateOptions: @UPDATE_OPTIONS@
+UpdateType: @UPDATE_TYPE@
+
+# Compiler info
+Compiler: @CMAKE_CXX_COMPILER@
+CompilerVersion: @CMAKE_CXX_COMPILER_VERSION@
+
+# Dynamic analysis (MemCheck)
+PurifyCommand: @PURIFYCOMMAND@
+ValgrindCommand: @VALGRIND_COMMAND@
+ValgrindCommandOptions: @VALGRIND_COMMAND_OPTIONS@
+MemoryCheckType: @MEMORYCHECK_TYPE@
+MemoryCheckSanitizerOptions: @MEMORYCHECK_SANITIZER_OPTIONS@
+MemoryCheckCommand: @MEMORYCHECK_COMMAND@
+MemoryCheckCommandOptions: @MEMORYCHECK_COMMAND_OPTIONS@
+MemoryCheckSuppressionFile: @MEMORYCHECK_SUPPRESSIONS_FILE@
+
+# Coverage
+CoverageCommand: @COVERAGE_COMMAND@
+CoverageExtraFlags: @COVERAGE_EXTRA_FLAGS@
+
+# Cluster commands
+SlurmBatchCommand: @SLURM_SBATCH_COMMAND@
+SlurmRunCommand: @SLURM_SRUN_COMMAND@
+
+# Testing options
+# TimeOut is the amount of time in seconds to wait for processes
+# to complete during testing.  After TimeOut seconds, the
+# process will be summarily terminated.
+# Currently set to 25 minutes
+TimeOut: @DART_TESTING_TIMEOUT@
+
+# During parallel testing CTest will not start a new test if doing
+# so would cause the system load to exceed this value.
+TestLoad: @CTEST_TEST_LOAD@
+
+UseLaunchers: @CTEST_USE_LAUNCHERS@
+CurlOptions: @CTEST_CURL_OPTIONS@
+# warning, if you add new options here that have to do with submit,
+# you have to update cmCTestSubmitCommand.cxx
+
+# For CTest submissions that timeout, these options
+# specify behavior for retrying the submission
+CTestSubmitRetryDelay: @CTEST_SUBMIT_RETRY_DELAY@
+CTestSubmitRetryCount: @CTEST_SUBMIT_RETRY_COUNT@
diff --git a/share/cmake-3.6/Modules/DeployQt4.cmake b/share/cmake-3.6/Modules/DeployQt4.cmake
new file mode 100644
index 0000000..de475e4
--- /dev/null
+++ b/share/cmake-3.6/Modules/DeployQt4.cmake
@@ -0,0 +1,390 @@
+#.rst:
+# DeployQt4
+# ---------
+#
+# Functions to help assemble a standalone Qt4 executable.
+#
+# A collection of CMake utility functions useful for deploying Qt4
+# executables.
+#
+# The following functions are provided by this module:
+#
+# ::
+#
+#    write_qt4_conf
+#    resolve_qt4_paths
+#    fixup_qt4_executable
+#    install_qt4_plugin_path
+#    install_qt4_plugin
+#    install_qt4_executable
+#
+# Requires CMake 2.6 or greater because it uses function and
+# PARENT_SCOPE.  Also depends on BundleUtilities.cmake.
+#
+# ::
+#
+#   WRITE_QT4_CONF(<qt_conf_dir> <qt_conf_contents>)
+#
+# Writes a qt.conf file with the <qt_conf_contents> into <qt_conf_dir>.
+#
+# ::
+#
+#   RESOLVE_QT4_PATHS(<paths_var> [<executable_path>])
+#
+# Loop through <paths_var> list and if any don't exist resolve them
+# relative to the <executable_path> (if supplied) or the
+# CMAKE_INSTALL_PREFIX.
+#
+# ::
+#
+#   FIXUP_QT4_EXECUTABLE(<executable>
+#     [<qtplugins> <libs> <dirs> <plugins_dir> <request_qt_conf>])
+#
+# Copies Qt plugins, writes a Qt configuration file (if needed) and
+# fixes up a Qt4 executable using BundleUtilities so it is standalone
+# and can be drag-and-drop copied to another machine as long as all of
+# the system libraries are compatible.
+#
+# <executable> should point to the executable to be fixed-up.
+#
+# <qtplugins> should contain a list of the names or paths of any Qt
+# plugins to be installed.
+#
+# <libs> will be passed to BundleUtilities and should be a list of any
+# already installed plugins, libraries or executables to also be
+# fixed-up.
+#
+# <dirs> will be passed to BundleUtilities and should contain and
+# directories to be searched to find library dependencies.
+#
+# <plugins_dir> allows an custom plugins directory to be used.
+#
+# <request_qt_conf> will force a qt.conf file to be written even if not
+# needed.
+#
+# ::
+#
+#   INSTALL_QT4_PLUGIN_PATH(plugin executable copy installed_plugin_path_var
+#                           <plugins_dir> <component> <configurations>)
+#
+# Install (or copy) a resolved <plugin> to the default plugins directory
+# (or <plugins_dir>) relative to <executable> and store the result in
+# <installed_plugin_path_var>.
+#
+# If <copy> is set to TRUE then the plugins will be copied rather than
+# installed.  This is to allow this module to be used at CMake time
+# rather than install time.
+#
+# If <component> is set then anything installed will use this COMPONENT.
+#
+# ::
+#
+#   INSTALL_QT4_PLUGIN(plugin executable copy installed_plugin_path_var
+#                      <plugins_dir> <component>)
+#
+# Install (or copy) an unresolved <plugin> to the default plugins
+# directory (or <plugins_dir>) relative to <executable> and store the
+# result in <installed_plugin_path_var>.  See documentation of
+# INSTALL_QT4_PLUGIN_PATH.
+#
+# ::
+#
+#   INSTALL_QT4_EXECUTABLE(<executable>
+#     [<qtplugins> <libs> <dirs> <plugins_dir> <request_qt_conf> <component>])
+#
+# Installs Qt plugins, writes a Qt configuration file (if needed) and
+# fixes up a Qt4 executable using BundleUtilities so it is standalone
+# and can be drag-and-drop copied to another machine as long as all of
+# the system libraries are compatible.  The executable will be fixed-up
+# at install time.  <component> is the COMPONENT used for bundle fixup
+# and plugin installation.  See documentation of FIXUP_QT4_BUNDLE.
+
+#=============================================================================
+# Copyright 2011 Mike McQuaid <mike@mikemcquaid.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# The functions defined in this file depend on the fixup_bundle function
+# (and others) found in BundleUtilities.cmake
+
+include("${CMAKE_CURRENT_LIST_DIR}/BundleUtilities.cmake")
+set(DeployQt4_cmake_dir "${CMAKE_CURRENT_LIST_DIR}")
+set(DeployQt4_apple_plugins_dir "PlugIns")
+
+function(write_qt4_conf qt_conf_dir qt_conf_contents)
+        set(qt_conf_path "${qt_conf_dir}/qt.conf")
+        message(STATUS "Writing ${qt_conf_path}")
+        file(WRITE "${qt_conf_path}" "${qt_conf_contents}")
+endfunction()
+
+function(resolve_qt4_paths paths_var)
+        unset(executable_path)
+        if(ARGC GREATER 1)
+                set(executable_path ${ARGV1})
+        endif()
+
+        set(paths_resolved)
+        foreach(path ${${paths_var}})
+                if(EXISTS "${path}")
+                        list(APPEND paths_resolved "${path}")
+                else()
+                        if(${executable_path})
+                                list(APPEND paths_resolved "${executable_path}/${path}")
+                        else()
+                                list(APPEND paths_resolved "\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${path}")
+                        endif()
+                endif()
+        endforeach()
+        set(${paths_var} ${paths_resolved} PARENT_SCOPE)
+endfunction()
+
+function(fixup_qt4_executable executable)
+        unset(qtplugins)
+        if(ARGC GREATER 1)
+                set(qtplugins ${ARGV1})
+        endif()
+        unset(libs)
+        if(ARGC GREATER 2)
+                set(libs ${ARGV2})
+        endif()
+        unset(dirs)
+        if(ARGC GREATER 3)
+                set(dirs ${ARGV3})
+        endif()
+        unset(plugins_dir)
+        if(ARGC GREATER 4)
+                set(plugins_dir ${ARGV4})
+        endif()
+        unset(request_qt_conf)
+        if(ARGC GREATER 5)
+                set(request_qt_conf ${ARGV5})
+        endif()
+
+        message(STATUS "fixup_qt4_executable")
+        message(STATUS "  executable='${executable}'")
+        message(STATUS "  qtplugins='${qtplugins}'")
+        message(STATUS "  libs='${libs}'")
+        message(STATUS "  dirs='${dirs}'")
+        message(STATUS "  plugins_dir='${plugins_dir}'")
+        message(STATUS "  request_qt_conf='${request_qt_conf}'")
+
+        if(QT_LIBRARY_DIR)
+                list(APPEND dirs "${QT_LIBRARY_DIR}")
+        endif()
+        if(QT_BINARY_DIR)
+                list(APPEND dirs "${QT_BINARY_DIR}")
+        endif()
+
+        if(APPLE)
+                set(qt_conf_dir "${executable}/Contents/Resources")
+                set(executable_path "${executable}")
+                set(write_qt_conf TRUE)
+                if(NOT DEFINED plugins_dir)
+                        set(plugins_dir "${DeployQt4_apple_plugins_dir}")
+                endif()
+        else()
+                get_filename_component(executable_path "${executable}" PATH)
+                if(NOT executable_path)
+                        set(executable_path ".")
+                endif()
+                set(qt_conf_dir "${executable_path}")
+                set(write_qt_conf ${request_qt_conf})
+        endif()
+
+        foreach(plugin ${qtplugins})
+                set(installed_plugin_path "")
+                install_qt4_plugin("${plugin}" "${executable}" 1 installed_plugin_path)
+                list(APPEND libs ${installed_plugin_path})
+        endforeach()
+
+        foreach(lib ${libs})
+                if(NOT EXISTS "${lib}")
+                        message(FATAL_ERROR "Library does not exist: ${lib}")
+                endif()
+        endforeach()
+
+        resolve_qt4_paths(libs "${executable_path}")
+
+        if(write_qt_conf)
+                set(qt_conf_contents "[Paths]\nPlugins = ${plugins_dir}")
+                write_qt4_conf("${qt_conf_dir}" "${qt_conf_contents}")
+        endif()
+
+        fixup_bundle("${executable}" "${libs}" "${dirs}")
+endfunction()
+
+function(install_qt4_plugin_path plugin executable copy installed_plugin_path_var)
+        unset(plugins_dir)
+        if(ARGC GREATER 4)
+                set(plugins_dir ${ARGV4})
+        endif()
+        unset(component)
+        if(ARGC GREATER 5)
+                set(component ${ARGV5})
+        endif()
+        unset(configurations)
+        if(ARGC GREATER 6)
+                set(configurations ${ARGV6})
+        endif()
+
+        if(EXISTS "${plugin}")
+                if(APPLE)
+                        if(NOT plugins_dir)
+                                set(plugins_dir "${DeployQt4_apple_plugins_dir}")
+                        endif()
+                        set(plugins_path "${executable}/Contents/${plugins_dir}")
+                else()
+                        get_filename_component(plugins_path "${executable}" PATH)
+                        if(NOT plugins_path)
+                                set(plugins_path ".")
+                        endif()
+                        if(plugins_dir)
+                                set(plugins_path "${plugins_path}/${plugins_dir}")
+                        endif()
+                endif()
+
+                set(plugin_group "")
+
+                get_filename_component(plugin_path "${plugin}" PATH)
+                get_filename_component(plugin_parent_path "${plugin_path}" PATH)
+                get_filename_component(plugin_parent_dir_name "${plugin_parent_path}" NAME)
+                get_filename_component(plugin_name "${plugin}" NAME)
+                string(TOLOWER "${plugin_parent_dir_name}" plugin_parent_dir_name)
+
+                if("${plugin_parent_dir_name}" STREQUAL "plugins")
+                        get_filename_component(plugin_group "${plugin_path}" NAME)
+                        set(${plugin_group_var} "${plugin_group}")
+                endif()
+                set(plugins_path "${plugins_path}/${plugin_group}")
+
+                if(${copy})
+                        file(MAKE_DIRECTORY "${plugins_path}")
+                        file(COPY "${plugin}" DESTINATION "${plugins_path}")
+                else()
+                        if(configurations AND (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE))
+                                set(configurations CONFIGURATIONS ${configurations})
+                        else()
+                                unset(configurations)
+                        endif()
+                        install(FILES "${plugin}" DESTINATION "${plugins_path}" ${configurations} ${component})
+                endif()
+                set(${installed_plugin_path_var} "${plugins_path}/${plugin_name}" PARENT_SCOPE)
+        endif()
+endfunction()
+
+function(install_qt4_plugin plugin executable copy installed_plugin_path_var)
+        unset(plugins_dir)
+        if(ARGC GREATER 4)
+                set(plugins_dir ${ARGV4})
+        endif()
+        unset(component)
+        if(ARGC GREATER 5)
+                set(component ${ARGV5})
+        endif()
+
+        if(EXISTS "${plugin}")
+                install_qt4_plugin_path("${plugin}" "${executable}" "${copy}" "${installed_plugin_path_var}" "${plugins_dir}" "${component}")
+        else()
+                string(TOUPPER "QT_${plugin}_PLUGIN" plugin_var)
+                set(plugin_release_var "${plugin_var}_RELEASE")
+                set(plugin_debug_var "${plugin_var}_DEBUG")
+                set(plugin_release "${${plugin_release_var}}")
+                set(plugin_debug "${${plugin_debug_var}}")
+                if(DEFINED "${plugin_release_var}" AND DEFINED "${plugin_debug_var}" AND NOT EXISTS "${plugin_release}" AND NOT EXISTS "${plugin_debug}")
+                        message(WARNING "Qt plugin \"${plugin}\" not recognized or found.")
+                endif()
+                if(NOT EXISTS "${${plugin_debug_var}}")
+                        set(plugin_debug "${plugin_release}")
+                endif()
+
+                if(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
+                        install_qt4_plugin_path("${plugin_release}" "${executable}" "${copy}" "${installed_plugin_path_var}_release" "${plugins_dir}" "${component}" "Release|RelWithDebInfo|MinSizeRel")
+                        install_qt4_plugin_path("${plugin_debug}" "${executable}" "${copy}" "${installed_plugin_path_var}_debug" "${plugins_dir}" "${component}" "Debug")
+
+                        if(CMAKE_BUILD_TYPE MATCHES "^Debug$")
+                                set(${installed_plugin_path_var} ${${installed_plugin_path_var}_debug})
+                        else()
+                                set(${installed_plugin_path_var} ${${installed_plugin_path_var}_release})
+                        endif()
+                else()
+                        install_qt4_plugin_path("${plugin_release}" "${executable}" "${copy}" "${installed_plugin_path_var}" "${plugins_dir}" "${component}")
+                endif()
+        endif()
+        set(${installed_plugin_path_var} ${${installed_plugin_path_var}} PARENT_SCOPE)
+endfunction()
+
+function(install_qt4_executable executable)
+        unset(qtplugins)
+        if(ARGC GREATER 1)
+                set(qtplugins ${ARGV1})
+        endif()
+        unset(libs)
+        if(ARGC GREATER 2)
+                set(libs ${ARGV2})
+        endif()
+        unset(dirs)
+        if(ARGC GREATER 3)
+                set(dirs ${ARGV3})
+        endif()
+        unset(plugins_dir)
+        if(ARGC GREATER 4)
+                set(plugins_dir ${ARGV4})
+        endif()
+        unset(request_qt_conf)
+        if(ARGC GREATER 5)
+                set(request_qt_conf ${ARGV5})
+        endif()
+        unset(component)
+        if(ARGC GREATER 6)
+                set(component ${ARGV6})
+        endif()
+
+        if(QT_LIBRARY_DIR)
+                list(APPEND dirs "${QT_LIBRARY_DIR}")
+        endif()
+        if(QT_BINARY_DIR)
+                list(APPEND dirs "${QT_BINARY_DIR}")
+        endif()
+        if(component)
+                set(component COMPONENT ${component})
+        else()
+                unset(component)
+        endif()
+
+        get_filename_component(executable_absolute "${executable}" ABSOLUTE)
+        if(EXISTS "${QT_QTCORE_LIBRARY_RELEASE}")
+            gp_file_type("${executable_absolute}" "${QT_QTCORE_LIBRARY_RELEASE}" qtcore_type)
+        elseif(EXISTS "${QT_QTCORE_LIBRARY_DEBUG}")
+            gp_file_type("${executable_absolute}" "${QT_QTCORE_LIBRARY_DEBUG}" qtcore_type)
+        endif()
+        if(qtcore_type STREQUAL "system")
+                set(qt_plugins_dir "")
+        endif()
+
+        if(QT_IS_STATIC)
+                message(WARNING "Qt built statically: not installing plugins.")
+        else()
+                foreach(plugin ${qtplugins})
+                        set(installed_plugin_paths "")
+                        install_qt4_plugin("${plugin}" "${executable}" 0 installed_plugin_paths "${plugins_dir}" "${component}")
+                        list(APPEND libs ${installed_plugin_paths})
+                endforeach()
+        endif()
+
+        resolve_qt4_paths(libs "")
+
+        install(CODE
+  "include(\"${DeployQt4_cmake_dir}/DeployQt4.cmake\")
+  set(BU_CHMOD_BUNDLE_ITEMS TRUE)
+  FIXUP_QT4_EXECUTABLE(\"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${executable}\" \"\" \"${libs}\" \"${dirs}\" \"${plugins_dir}\" \"${request_qt_conf}\")"
+                ${component}
+        )
+endfunction()
diff --git a/share/cmake-3.2/Modules/Documentation.cmake b/share/cmake-3.6/Modules/Documentation.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Documentation.cmake
rename to share/cmake-3.6/Modules/Documentation.cmake
diff --git a/share/cmake-3.2/Modules/DummyCXXFile.cxx b/share/cmake-3.6/Modules/DummyCXXFile.cxx
similarity index 100%
rename from share/cmake-3.2/Modules/DummyCXXFile.cxx
rename to share/cmake-3.6/Modules/DummyCXXFile.cxx
diff --git a/share/cmake-3.6/Modules/ExternalData.cmake b/share/cmake-3.6/Modules/ExternalData.cmake
new file mode 100644
index 0000000..a3f460d
--- /dev/null
+++ b/share/cmake-3.6/Modules/ExternalData.cmake
@@ -0,0 +1,1066 @@
+#[=======================================================================[.rst:
+ExternalData
+------------
+
+.. only:: html
+
+   .. contents::
+
+Manage data files stored outside source tree
+
+Introduction
+^^^^^^^^^^^^
+
+Use this module to unambiguously reference data files stored outside
+the source tree and fetch them at build time from arbitrary local and
+remote content-addressed locations.  Functions provided by this module
+recognize arguments with the syntax ``DATA{<name>}`` as references to
+external data, replace them with full paths to local copies of those
+data, and create build rules to fetch and update the local copies.
+
+For example:
+
+.. code-block:: cmake
+
+ include(ExternalData)
+ set(ExternalData_URL_TEMPLATES "file:///local/%(algo)/%(hash)"
+                                "file:////host/share/%(algo)/%(hash)"
+                                "http://data.org/%(algo)/%(hash)")
+ ExternalData_Add_Test(MyData
+   NAME MyTest
+   COMMAND MyExe DATA{MyInput.png}
+   )
+ ExternalData_Add_Target(MyData)
+
+When test ``MyTest`` runs the ``DATA{MyInput.png}`` argument will be
+replaced by the full path to a real instance of the data file
+``MyInput.png`` on disk.  If the source tree contains a content link
+such as ``MyInput.png.md5`` then the ``MyData`` target creates a real
+``MyInput.png`` in the build tree.
+
+Module Functions
+^^^^^^^^^^^^^^^^
+
+.. command:: ExternalData_Expand_Arguments
+
+  The ``ExternalData_Expand_Arguments`` function evaluates ``DATA{}``
+  references in its arguments and constructs a new list of arguments::
+
+    ExternalData_Expand_Arguments(
+      <target>   # Name of data management target
+      <outVar>   # Output variable
+      [args...]  # Input arguments, DATA{} allowed
+      )
+
+  It replaces each ``DATA{}`` reference in an argument with the full path of
+  a real data file on disk that will exist after the ``<target>`` builds.
+
+.. command:: ExternalData_Add_Test
+
+  The ``ExternalData_Add_Test`` function wraps around the CMake
+  :command:`add_test` command but supports ``DATA{}`` references in
+  its arguments::
+
+    ExternalData_Add_Test(
+      <target>   # Name of data management target
+      ...        # Arguments of add_test(), DATA{} allowed
+      )
+
+  It passes its arguments through ``ExternalData_Expand_Arguments`` and then
+  invokes the :command:`add_test` command using the results.
+
+.. command:: ExternalData_Add_Target
+
+  The ``ExternalData_Add_Target`` function creates a custom target to
+  manage local instances of data files stored externally::
+
+    ExternalData_Add_Target(
+      <target>   # Name of data management target
+      )
+
+  It creates custom commands in the target as necessary to make data
+  files available for each ``DATA{}`` reference previously evaluated by
+  other functions provided by this module.
+  Data files may be fetched from one of the URL templates specified in
+  the ``ExternalData_URL_TEMPLATES`` variable, or may be found locally
+  in one of the paths specified in the ``ExternalData_OBJECT_STORES``
+  variable.
+
+Module Variables
+^^^^^^^^^^^^^^^^
+
+The following variables configure behavior.  They should be set before
+calling any of the functions provided by this module.
+
+.. variable:: ExternalData_BINARY_ROOT
+
+  The ``ExternalData_BINARY_ROOT`` variable may be set to the directory to
+  hold the real data files named by expanded ``DATA{}`` references.  The
+  default is ``CMAKE_BINARY_DIR``.  The directory layout will mirror that of
+  content links under ``ExternalData_SOURCE_ROOT``.
+
+.. variable:: ExternalData_CUSTOM_SCRIPT_<key>
+
+  Specify a full path to a ``.cmake`` custom fetch script identified by
+  ``<key>`` in entries of the ``ExternalData_URL_TEMPLATES`` list.
+  See `Custom Fetch Scripts`_.
+
+.. variable:: ExternalData_LINK_CONTENT
+
+  The ``ExternalData_LINK_CONTENT`` variable may be set to the name of a
+  supported hash algorithm to enable automatic conversion of real data
+  files referenced by the ``DATA{}`` syntax into content links.  For each
+  such ``<file>`` a content link named ``<file><ext>`` is created.  The
+  original file is renamed to the form ``.ExternalData_<algo>_<hash>`` to
+  stage it for future transmission to one of the locations in the list
+  of URL templates (by means outside the scope of this module).  The
+  data fetch rule created for the content link will use the staged
+  object if it cannot be found using any URL template.
+
+.. variable:: ExternalData_NO_SYMLINKS
+
+  The real data files named by expanded ``DATA{}`` references may be made
+  available under ``ExternalData_BINARY_ROOT`` using symbolic links on
+  some platforms.  The ``ExternalData_NO_SYMLINKS`` variable may be set
+  to disable use of symbolic links and enable use of copies instead.
+
+.. variable:: ExternalData_OBJECT_STORES
+
+  The ``ExternalData_OBJECT_STORES`` variable may be set to a list of local
+  directories that store objects using the layout ``<dir>/%(algo)/%(hash)``.
+  These directories will be searched first for a needed object.  If the
+  object is not available in any store then it will be fetched remotely
+  using the URL templates and added to the first local store listed.  If
+  no stores are specified the default is a location inside the build
+  tree.
+
+.. variable:: ExternalData_SERIES_PARSE
+              ExternalData_SERIES_PARSE_PREFIX
+              ExternalData_SERIES_PARSE_NUMBER
+              ExternalData_SERIES_PARSE_SUFFIX
+              ExternalData_SERIES_MATCH
+
+  See `Referencing File Series`_.
+
+.. variable:: ExternalData_SOURCE_ROOT
+
+  The ``ExternalData_SOURCE_ROOT`` variable may be set to the highest source
+  directory containing any path named by a ``DATA{}`` reference.  The
+  default is ``CMAKE_SOURCE_DIR``.  ``ExternalData_SOURCE_ROOT`` and
+  ``CMAKE_SOURCE_DIR`` must refer to directories within a single source
+  distribution (e.g.  they come together in one tarball).
+
+.. variable:: ExternalData_TIMEOUT_ABSOLUTE
+
+  The ``ExternalData_TIMEOUT_ABSOLUTE`` variable sets the download
+  absolute timeout, in seconds, with a default of ``300`` seconds.
+  Set to ``0`` to disable enforcement.
+
+.. variable:: ExternalData_TIMEOUT_INACTIVITY
+
+  The ``ExternalData_TIMEOUT_INACTIVITY`` variable sets the download
+  inactivity timeout, in seconds, with a default of ``60`` seconds.
+  Set to ``0`` to disable enforcement.
+
+.. variable:: ExternalData_URL_ALGO_<algo>_<key>
+
+  Specify a custom URL component to be substituted for URL template
+  placeholders of the form ``%(algo:<key>)``, where ``<key>`` is a
+  valid C identifier, when fetching an object referenced via hash
+  algorithm ``<algo>``.  If not defined, the default URL component
+  is just ``<algo>`` for any ``<key>``.
+
+.. variable:: ExternalData_URL_TEMPLATES
+
+  The ``ExternalData_URL_TEMPLATES`` may be set to provide a list of
+  of URL templates using the placeholders ``%(algo)`` and ``%(hash)``
+  in each template.  Data fetch rules try each URL template in order
+  by substituting the hash algorithm name for ``%(algo)`` and the hash
+  value for ``%(hash)``.  Alternatively one may use ``%(algo:<key>)``
+  with ``ExternalData_URL_ALGO_<algo>_<key>`` variables to gain more
+  flexibility in remote URLs.
+
+Referencing Files
+^^^^^^^^^^^^^^^^^
+
+Referencing Single Files
+""""""""""""""""""""""""
+
+The ``DATA{}`` syntax is literal and the ``<name>`` is a full or relative path
+within the source tree.  The source tree must contain either a real
+data file at ``<name>`` or a "content link" at ``<name><ext>`` containing a
+hash of the real file using a hash algorithm corresponding to ``<ext>``.
+For example, the argument ``DATA{img.png}`` may be satisfied by either a
+real ``img.png`` file in the current source directory or a ``img.png.md5``
+file containing its MD5 sum.
+
+Referencing File Series
+"""""""""""""""""""""""
+
+The ``DATA{}`` syntax can be told to fetch a file series using the form
+``DATA{<name>,:}``, where the ``:`` is literal.  If the source tree
+contains a group of files or content links named like a series then a
+reference to one member adds rules to fetch all of them.  Although all
+members of a series are fetched, only the file originally named by the
+``DATA{}`` argument is substituted for it.  The default configuration
+recognizes file series names ending with ``#.ext``, ``_#.ext``, ``.#.ext``,
+or ``-#.ext`` where ``#`` is a sequence of decimal digits and ``.ext`` is
+any single extension.  Configure it with a regex that parses ``<number>``
+and ``<suffix>`` parts from the end of ``<name>``::
+
+ ExternalData_SERIES_PARSE = regex of the form (<number>)(<suffix>)$
+
+For more complicated cases set::
+
+ ExternalData_SERIES_PARSE = regex with at least two () groups
+ ExternalData_SERIES_PARSE_PREFIX = <prefix> regex group number, if any
+ ExternalData_SERIES_PARSE_NUMBER = <number> regex group number
+ ExternalData_SERIES_PARSE_SUFFIX = <suffix> regex group number
+
+Configure series number matching with a regex that matches the
+``<number>`` part of series members named ``<prefix><number><suffix>``::
+
+ ExternalData_SERIES_MATCH = regex matching <number> in all series members
+
+Note that the ``<suffix>`` of a series does not include a hash-algorithm
+extension.
+
+Referencing Associated Files
+""""""""""""""""""""""""""""
+
+The ``DATA{}`` syntax can alternatively match files associated with the
+named file and contained in the same directory.  Associated files may
+be specified by options using the syntax
+``DATA{<name>,<opt1>,<opt2>,...}``.  Each option may specify one file by
+name or specify a regular expression to match file names using the
+syntax ``REGEX:<regex>``.  For example, the arguments::
+
+ DATA{MyData/MyInput.mhd,MyInput.img}                   # File pair
+ DATA{MyData/MyFrames00.png,REGEX:MyFrames[0-9]+\\.png} # Series
+
+will pass ``MyInput.mha`` and ``MyFrames00.png`` on the command line but
+ensure that the associated files are present next to them.
+
+Referencing Directories
+"""""""""""""""""""""""
+
+The ``DATA{}`` syntax may reference a directory using a trailing slash and
+a list of associated files.  The form ``DATA{<name>/,<opt1>,<opt2>,...}``
+adds rules to fetch any files in the directory that match one of the
+associated file options.  For example, the argument
+``DATA{MyDataDir/,REGEX:.*}`` will pass the full path to a ``MyDataDir``
+directory on the command line and ensure that the directory contains
+files corresponding to every file or content link in the ``MyDataDir``
+source directory.  In order to match associated files in subdirectories,
+specify a ``RECURSE:`` option, e.g. ``DATA{MyDataDir/,RECURSE:,REGEX:.*}``.
+
+Hash Algorithms
+^^^^^^^^^^^^^^^
+
+The following hash algorithms are supported::
+
+ %(algo)     <ext>     Description
+ -------     -----     -----------
+ MD5         .md5      Message-Digest Algorithm 5, RFC 1321
+ SHA1        .sha1     US Secure Hash Algorithm 1, RFC 3174
+ SHA224      .sha224   US Secure Hash Algorithms, RFC 4634
+ SHA256      .sha256   US Secure Hash Algorithms, RFC 4634
+ SHA384      .sha384   US Secure Hash Algorithms, RFC 4634
+ SHA512      .sha512   US Secure Hash Algorithms, RFC 4634
+
+Note that the hashes are used only for unique data identification and
+download verification.
+
+.. _`ExternalData Custom Fetch Scripts`:
+
+Custom Fetch Scripts
+^^^^^^^^^^^^^^^^^^^^
+
+When a data file must be fetched from one of the URL templates
+specified in the ``ExternalData_URL_TEMPLATES`` variable, it is
+normally downloaded using the :command:`file(DOWNLOAD)` command.
+One may specify usage of a custom fetch script by using a URL
+template of the form ``ExternalDataCustomScript://<key>/<loc>``.
+The ``<key>`` must be a C identifier, and the ``<loc>`` must
+contain the ``%(algo)`` and ``%(hash)`` placeholders.
+A variable corresponding to the key, ``ExternalData_CUSTOM_SCRIPT_<key>``,
+must be set to the full path to a ``.cmake`` script file.  The script
+will be included to perform the actual fetch, and provided with
+the following variables:
+
+.. variable:: ExternalData_CUSTOM_LOCATION
+
+  When a custom fetch script is loaded, this variable is set to the
+  location part of the URL, which will contain the substituted hash
+  algorithm name and content hash value.
+
+.. variable:: ExternalData_CUSTOM_FILE
+
+  When a custom fetch script is loaded, this variable is set to the
+  full path to a file in which the script must store the fetched
+  content.  The name of the file is unspecified and should not be
+  interpreted in any way.
+
+The custom fetch script is expected to store fetched content in the
+file or set a variable:
+
+.. variable:: ExternalData_CUSTOM_ERROR
+
+  When a custom fetch script fails to fetch the requested content,
+  it must set this variable to a short one-line message describing
+  the reason for failure.
+
+#]=======================================================================]
+
+#=============================================================================
+# Copyright 2010-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(ExternalData_add_test target)
+  # Expand all arguments as a single string to preserve escaped semicolons.
+  ExternalData_expand_arguments("${target}" testArgs "${ARGN}")
+  add_test(${testArgs})
+endfunction()
+
+function(ExternalData_add_target target)
+  if(NOT ExternalData_URL_TEMPLATES AND NOT ExternalData_OBJECT_STORES)
+    message(FATAL_ERROR
+      "Neither ExternalData_URL_TEMPLATES nor ExternalData_OBJECT_STORES is set!")
+  endif()
+  if(NOT ExternalData_OBJECT_STORES)
+    set(ExternalData_OBJECT_STORES ${CMAKE_BINARY_DIR}/ExternalData/Objects)
+  endif()
+  set(_ExternalData_CONFIG_CODE "")
+
+  # Store custom script configuration.
+  foreach(url_template IN LISTS ExternalData_URL_TEMPLATES)
+    if("${url_template}" MATCHES "^ExternalDataCustomScript://([^/]*)/(.*)$")
+      set(key "${CMAKE_MATCH_1}")
+      if(key MATCHES "^[A-Za-z_][A-Za-z0-9_]*$")
+        if(ExternalData_CUSTOM_SCRIPT_${key})
+          if(IS_ABSOLUTE "${ExternalData_CUSTOM_SCRIPT_${key}}")
+            string(CONCAT _ExternalData_CONFIG_CODE "${_ExternalData_CONFIG_CODE}\n"
+              "set(ExternalData_CUSTOM_SCRIPT_${key} \"${ExternalData_CUSTOM_SCRIPT_${key}}\")")
+          else()
+            message(FATAL_ERROR
+              "No ExternalData_CUSTOM_SCRIPT_${key} is not set to a full path:\n"
+              " ${ExternalData_CUSTOM_SCRIPT_${key}}")
+          endif()
+        else()
+          message(FATAL_ERROR
+            "No ExternalData_CUSTOM_SCRIPT_${key} is set for URL template:\n"
+            " ${url_template}")
+        endif()
+      else()
+        message(FATAL_ERROR
+          "Bad ExternalDataCustomScript key '${key}' in URL template:\n"
+          " ${url_template}\n"
+          "The key must be a valid C identifier.")
+      endif()
+    endif()
+
+    # Store custom algorithm name to URL component maps.
+    if("${url_template}" MATCHES "%\\(algo:([^)]*)\\)")
+      set(key "${CMAKE_MATCH_1}")
+      if(key MATCHES "^[A-Za-z_][A-Za-z0-9_]*$")
+        string(REPLACE "|" ";" _algos "${_ExternalData_REGEX_ALGO}")
+        foreach(algo ${_algos})
+          if(DEFINED ExternalData_URL_ALGO_${algo}_${key})
+            string(CONCAT _ExternalData_CONFIG_CODE "${_ExternalData_CONFIG_CODE}\n"
+              "set(ExternalData_URL_ALGO_${algo}_${key} \"${ExternalData_URL_ALGO_${algo}_${key}}\")")
+          endif()
+        endforeach()
+      else()
+        message(FATAL_ERROR
+          "Bad %(algo:${key}) in URL template:\n"
+          " ${url_template}\n"
+          "The transform name must be a valid C identifier.")
+      endif()
+    endif()
+  endforeach()
+
+  # Store configuration for use by build-time script.
+  set(config ${CMAKE_CURRENT_BINARY_DIR}/${target}_config.cmake)
+  configure_file(${_ExternalData_SELF_DIR}/ExternalData_config.cmake.in ${config} @ONLY)
+
+  set(files "")
+
+  # Set "_ExternalData_FILE_${file}" for each output file to avoid duplicate
+  # rules.  Use local data first to prefer real files over content links.
+
+  # Custom commands to copy or link local data.
+  get_property(data_local GLOBAL PROPERTY _ExternalData_${target}_LOCAL)
+  foreach(entry IN LISTS data_local)
+    string(REPLACE "|" ";" tuple "${entry}")
+    list(GET tuple 0 file)
+    list(GET tuple 1 name)
+    if(NOT DEFINED "_ExternalData_FILE_${file}")
+      set("_ExternalData_FILE_${file}" 1)
+      add_custom_command(
+        COMMENT "Generating ${file}"
+        OUTPUT "${file}"
+        COMMAND ${CMAKE_COMMAND} -Drelative_top=${CMAKE_BINARY_DIR}
+                                 -Dfile=${file} -Dname=${name}
+                                 -DExternalData_ACTION=local
+                                 -DExternalData_CONFIG=${config}
+                                 -P ${_ExternalData_SELF}
+        MAIN_DEPENDENCY "${name}"
+        )
+      list(APPEND files "${file}")
+    endif()
+  endforeach()
+
+  # Custom commands to fetch remote data.
+  get_property(data_fetch GLOBAL PROPERTY _ExternalData_${target}_FETCH)
+  foreach(entry IN LISTS data_fetch)
+    string(REPLACE "|" ";" tuple "${entry}")
+    list(GET tuple 0 file)
+    list(GET tuple 1 name)
+    list(GET tuple 2 ext)
+    set(stamp "${ext}-stamp")
+    if(NOT DEFINED "_ExternalData_FILE_${file}")
+      set("_ExternalData_FILE_${file}" 1)
+      add_custom_command(
+        # Users care about the data file, so hide the hash/timestamp file.
+        COMMENT "Generating ${file}"
+        # The hash/timestamp file is the output from the build perspective.
+        # List the real file as a second output in case it is a broken link.
+        # The files must be listed in this order so CMake can hide from the
+        # make tool that a symlink target may not be newer than the input.
+        OUTPUT "${file}${stamp}" "${file}"
+        # Run the data fetch/update script.
+        COMMAND ${CMAKE_COMMAND} -Drelative_top=${CMAKE_BINARY_DIR}
+                                 -Dfile=${file} -Dname=${name} -Dext=${ext}
+                                 -DExternalData_ACTION=fetch
+                                 -DExternalData_CONFIG=${config}
+                                 -P ${_ExternalData_SELF}
+        # Update whenever the object hash changes.
+        MAIN_DEPENDENCY "${name}${ext}"
+        )
+      list(APPEND files "${file}${stamp}")
+    endif()
+  endforeach()
+
+  # Custom target to drive all update commands.
+  add_custom_target(${target} ALL DEPENDS ${files})
+endfunction()
+
+function(ExternalData_expand_arguments target outArgsVar)
+  # Replace DATA{} references with real arguments.
+  set(data_regex "DATA{([^;{}\r\n]*)}")
+  set(other_regex "([^D]|D[^A]|DA[^T]|DAT[^A]|DATA[^{])+|.")
+  set(outArgs "")
+  # This list expansion un-escapes semicolons in list element values so we
+  # must re-escape them below anywhere a new list expansion will occur.
+  foreach(arg IN LISTS ARGN)
+    if("x${arg}" MATCHES "${data_regex}")
+      # Re-escape in-value semicolons before expansion in foreach below.
+      string(REPLACE ";" "\\;" tmp "${arg}")
+      # Split argument into DATA{}-pieces and other pieces.
+      string(REGEX MATCHALL "${data_regex}|${other_regex}" pieces "${tmp}")
+      # Compose output argument with DATA{}-pieces replaced.
+      set(outArg "")
+      foreach(piece IN LISTS pieces)
+        if("x${piece}" MATCHES "^x${data_regex}$")
+          # Replace this DATA{}-piece with a file path.
+          _ExternalData_arg("${target}" "${piece}" "${CMAKE_MATCH_1}" file)
+          set(outArg "${outArg}${file}")
+        else()
+          # No replacement needed for this piece.
+          set(outArg "${outArg}${piece}")
+        endif()
+      endforeach()
+    else()
+      # No replacements needed in this argument.
+      set(outArg "${arg}")
+    endif()
+    # Re-escape in-value semicolons in resulting list.
+    string(REPLACE ";" "\\;" outArg "${outArg}")
+    list(APPEND outArgs "${outArg}")
+  endforeach()
+  set("${outArgsVar}" "${outArgs}" PARENT_SCOPE)
+endfunction()
+
+#-----------------------------------------------------------------------------
+# Private helper interface
+
+set(_ExternalData_REGEX_ALGO "MD5|SHA1|SHA224|SHA256|SHA384|SHA512")
+set(_ExternalData_REGEX_EXT "md5|sha1|sha224|sha256|sha384|sha512")
+set(_ExternalData_SELF "${CMAKE_CURRENT_LIST_FILE}")
+get_filename_component(_ExternalData_SELF_DIR "${_ExternalData_SELF}" PATH)
+
+function(_ExternalData_compute_hash var_hash algo file)
+  if("${algo}" MATCHES "^${_ExternalData_REGEX_ALGO}$")
+    file("${algo}" "${file}" hash)
+    set("${var_hash}" "${hash}" PARENT_SCOPE)
+  else()
+    message(FATAL_ERROR "Hash algorithm ${algo} unimplemented.")
+  endif()
+endfunction()
+
+function(_ExternalData_random var)
+  string(RANDOM LENGTH 6 random)
+  set("${var}" "${random}" PARENT_SCOPE)
+endfunction()
+
+function(_ExternalData_exact_regex regex_var string)
+  string(REGEX REPLACE "([][+.*()^])" "\\\\\\1" regex "${string}")
+  set("${regex_var}" "${regex}" PARENT_SCOPE)
+endfunction()
+
+function(_ExternalData_atomic_write file content)
+  _ExternalData_random(random)
+  set(tmp "${file}.tmp${random}")
+  file(WRITE "${tmp}" "${content}")
+  file(RENAME "${tmp}" "${file}")
+endfunction()
+
+function(_ExternalData_link_content name var_ext)
+  if("${ExternalData_LINK_CONTENT}" MATCHES "^(${_ExternalData_REGEX_ALGO})$")
+    set(algo "${ExternalData_LINK_CONTENT}")
+  else()
+    message(FATAL_ERROR
+      "Unknown hash algorithm specified by ExternalData_LINK_CONTENT:\n"
+      "  ${ExternalData_LINK_CONTENT}")
+  endif()
+  _ExternalData_compute_hash(hash "${algo}" "${name}")
+  get_filename_component(dir "${name}" PATH)
+  set(staged "${dir}/.ExternalData_${algo}_${hash}")
+  string(TOLOWER ".${algo}" ext)
+  _ExternalData_atomic_write("${name}${ext}" "${hash}\n")
+  file(RENAME "${name}" "${staged}")
+  set("${var_ext}" "${ext}" PARENT_SCOPE)
+
+  file(RELATIVE_PATH relname "${ExternalData_SOURCE_ROOT}" "${name}${ext}")
+  message(STATUS "Linked ${relname} to ExternalData ${algo}/${hash}")
+endfunction()
+
+function(_ExternalData_arg target arg options var_file)
+  # Separate data path from the options.
+  string(REPLACE "," ";" options "${options}")
+  list(GET options 0 data)
+  list(REMOVE_AT options 0)
+
+  # Interpret trailing slashes as directories.
+  set(data_is_directory 0)
+  if("x${data}" MATCHES "^x(.*)([/\\])$")
+    set(data_is_directory 1)
+    set(data "${CMAKE_MATCH_1}")
+  endif()
+
+  # Convert to full path.
+  if(IS_ABSOLUTE "${data}")
+    set(absdata "${data}")
+  else()
+    set(absdata "${CMAKE_CURRENT_SOURCE_DIR}/${data}")
+  endif()
+  get_filename_component(absdata "${absdata}" ABSOLUTE)
+
+  # Convert to relative path under the source tree.
+  if(NOT ExternalData_SOURCE_ROOT)
+    set(ExternalData_SOURCE_ROOT "${CMAKE_SOURCE_DIR}")
+  endif()
+  set(top_src "${ExternalData_SOURCE_ROOT}")
+  file(RELATIVE_PATH reldata "${top_src}" "${absdata}")
+  if(IS_ABSOLUTE "${reldata}" OR "${reldata}" MATCHES "^\\.\\./")
+    message(FATAL_ERROR "Data file referenced by argument\n"
+      "  ${arg}\n"
+      "does not lie under the top-level source directory\n"
+      "  ${top_src}\n")
+  endif()
+  if(data_is_directory AND NOT IS_DIRECTORY "${top_src}/${reldata}")
+    message(FATAL_ERROR "Data directory referenced by argument\n"
+      "  ${arg}\n"
+      "corresponds to source tree path\n"
+      "  ${reldata}\n"
+      "that does not exist as a directory!")
+  endif()
+  if(NOT ExternalData_BINARY_ROOT)
+    set(ExternalData_BINARY_ROOT "${CMAKE_BINARY_DIR}")
+  endif()
+  set(top_bin "${ExternalData_BINARY_ROOT}")
+
+  # Handle in-source builds gracefully.
+  if("${top_src}" STREQUAL "${top_bin}")
+    if(ExternalData_LINK_CONTENT)
+      message(WARNING "ExternalData_LINK_CONTENT cannot be used in-source")
+      set(ExternalData_LINK_CONTENT 0)
+    endif()
+    set(top_same 1)
+  endif()
+
+  set(external "") # Entries external to the source tree.
+  set(internal "") # Entries internal to the source tree.
+  set(have_original ${data_is_directory})
+  set(have_original_as_dir 0)
+
+  # Process options.
+  set(series_option "")
+  set(recurse_option "")
+  set(associated_files "")
+  set(associated_regex "")
+  foreach(opt ${options})
+    # Regular expression to match associated files.
+    if("x${opt}" MATCHES "^xREGEX:([^:/]+)$")
+      list(APPEND associated_regex "${CMAKE_MATCH_1}")
+    elseif(opt STREQUAL ":")
+      # Activate series matching.
+      set(series_option "${opt}")
+    elseif(opt STREQUAL "RECURSE:")
+      # Activate recursive matching in directories.
+      set(recurse_option "${opt}")
+    elseif("x${opt}" MATCHES "^[^][:/*?]+$")
+      # Specific associated file.
+      list(APPEND associated_files "${opt}")
+    else()
+      message(FATAL_ERROR "Unknown option \"${opt}\" in argument\n"
+        "  ${arg}\n")
+    endif()
+  endforeach()
+
+  if(series_option)
+    if(data_is_directory)
+      message(FATAL_ERROR "Series option \"${series_option}\" not allowed with directories.")
+    endif()
+    if(associated_files OR associated_regex)
+      message(FATAL_ERROR "Series option \"${series_option}\" not allowed with associated files.")
+    endif()
+    if(recurse_option)
+      message(FATAL_ERROR "Recurse option \"${recurse_option}\" allowed only with directories.")
+    endif()
+    # Load a whole file series.
+    _ExternalData_arg_series()
+  elseif(data_is_directory)
+    if(associated_files OR associated_regex)
+      # Load listed/matching associated files in the directory.
+      _ExternalData_arg_associated()
+    else()
+      message(FATAL_ERROR "Data directory referenced by argument\n"
+        "  ${arg}\n"
+        "must list associated files.")
+    endif()
+  else()
+    if(recurse_option)
+      message(FATAL_ERROR "Recurse option \"${recurse_option}\" allowed only with directories.")
+    endif()
+    # Load the named data file.
+    _ExternalData_arg_single()
+    if(associated_files OR associated_regex)
+      # Load listed/matching associated files.
+      _ExternalData_arg_associated()
+    endif()
+  endif()
+
+  if(NOT have_original)
+    if(have_original_as_dir)
+      set(msg_kind FATAL_ERROR)
+      set(msg "that is directory instead of a file!")
+    else()
+      set(msg_kind AUTHOR_WARNING)
+      set(msg "that does not exist as a file (with or without an extension)!")
+    endif()
+    message(${msg_kind} "Data file referenced by argument\n"
+      "  ${arg}\n"
+      "corresponds to source tree path\n"
+      "  ${reldata}\n"
+      "${msg}")
+  endif()
+
+  if(external)
+    # Make the series available in the build tree.
+    set_property(GLOBAL APPEND PROPERTY
+      _ExternalData_${target}_FETCH "${external}")
+    set_property(GLOBAL APPEND PROPERTY
+      _ExternalData_${target}_LOCAL "${internal}")
+    set("${var_file}" "${top_bin}/${reldata}" PARENT_SCOPE)
+  else()
+    # The whole series is in the source tree.
+    set("${var_file}" "${top_src}/${reldata}" PARENT_SCOPE)
+  endif()
+endfunction()
+
+macro(_ExternalData_arg_associated)
+  # Associated files lie in the same directory.
+  if(data_is_directory)
+    set(reldir "${reldata}")
+  else()
+    get_filename_component(reldir "${reldata}" PATH)
+  endif()
+  if(reldir)
+    set(reldir "${reldir}/")
+  endif()
+  _ExternalData_exact_regex(reldir_regex "${reldir}")
+  if(recurse_option)
+    set(glob GLOB_RECURSE)
+    set(reldir_regex "${reldir_regex}(.+/)?")
+  else()
+    set(glob GLOB)
+  endif()
+
+  # Find files named explicitly.
+  foreach(file ${associated_files})
+    _ExternalData_exact_regex(file_regex "${file}")
+    _ExternalData_arg_find_files(${glob} "${reldir}${file}"
+      "${reldir_regex}${file_regex}")
+  endforeach()
+
+  # Find files matching the given regular expressions.
+  set(all "")
+  set(sep "")
+  foreach(regex ${associated_regex})
+    set(all "${all}${sep}${reldir_regex}${regex}")
+    set(sep "|")
+  endforeach()
+  _ExternalData_arg_find_files(${glob} "${reldir}" "${all}")
+endmacro()
+
+macro(_ExternalData_arg_single)
+  # Match only the named data by itself.
+  _ExternalData_exact_regex(data_regex "${reldata}")
+  _ExternalData_arg_find_files(GLOB "${reldata}" "${data_regex}")
+endmacro()
+
+macro(_ExternalData_arg_series)
+  # Configure series parsing and matching.
+  set(series_parse_prefix "")
+  set(series_parse_number "\\1")
+  set(series_parse_suffix "\\2")
+  if(ExternalData_SERIES_PARSE)
+    if(ExternalData_SERIES_PARSE_NUMBER AND ExternalData_SERIES_PARSE_SUFFIX)
+      if(ExternalData_SERIES_PARSE_PREFIX)
+        set(series_parse_prefix "\\${ExternalData_SERIES_PARSE_PREFIX}")
+      endif()
+      set(series_parse_number "\\${ExternalData_SERIES_PARSE_NUMBER}")
+      set(series_parse_suffix "\\${ExternalData_SERIES_PARSE_SUFFIX}")
+    elseif(NOT "x${ExternalData_SERIES_PARSE}" MATCHES "^x\\([^()]*\\)\\([^()]*\\)\\$$")
+      message(FATAL_ERROR
+        "ExternalData_SERIES_PARSE is set to\n"
+        "  ${ExternalData_SERIES_PARSE}\n"
+        "which is not of the form\n"
+        "  (<number>)(<suffix>)$\n"
+        "Fix the regular expression or set variables\n"
+        "  ExternalData_SERIES_PARSE_PREFIX = <prefix> regex group number, if any\n"
+        "  ExternalData_SERIES_PARSE_NUMBER = <number> regex group number\n"
+        "  ExternalData_SERIES_PARSE_SUFFIX = <suffix> regex group number\n"
+        )
+    endif()
+    set(series_parse "${ExternalData_SERIES_PARSE}")
+  else()
+    set(series_parse "([0-9]*)(\\.[^./]*)$")
+  endif()
+  if(ExternalData_SERIES_MATCH)
+    set(series_match "${ExternalData_SERIES_MATCH}")
+  else()
+    set(series_match "[_.-]?[0-9]*")
+  endif()
+
+  # Parse the base, number, and extension components of the series.
+  string(REGEX REPLACE "${series_parse}" "${series_parse_prefix};${series_parse_number};${series_parse_suffix}" tuple "${reldata}")
+  list(LENGTH tuple len)
+  if(NOT "${len}" EQUAL 3)
+    message(FATAL_ERROR "Data file referenced by argument\n"
+      "  ${arg}\n"
+      "corresponds to path\n"
+      "  ${reldata}\n"
+      "that does not match regular expression\n"
+      "  ${series_parse}")
+  endif()
+  list(GET tuple 0 relbase)
+  list(GET tuple 2 ext)
+
+  # Glob files that might match the series.
+  # Then match base, number, and extension.
+  _ExternalData_exact_regex(series_base "${relbase}")
+  _ExternalData_exact_regex(series_ext "${ext}")
+  _ExternalData_arg_find_files(GLOB "${relbase}*${ext}"
+    "${series_base}${series_match}${series_ext}")
+endmacro()
+
+function(_ExternalData_arg_find_files glob pattern regex)
+  cmake_policy(PUSH)
+  cmake_policy(SET CMP0009 NEW)
+  file(${glob} globbed RELATIVE "${top_src}" "${top_src}/${pattern}*")
+  cmake_policy(POP)
+  foreach(entry IN LISTS globbed)
+    if("x${entry}" MATCHES "^x(.*)(\\.(${_ExternalData_REGEX_EXT}))$")
+      set(relname "${CMAKE_MATCH_1}")
+      set(alg "${CMAKE_MATCH_2}")
+    else()
+      set(relname "${entry}")
+      set(alg "")
+    endif()
+    if("x${relname}" MATCHES "^x${regex}$" # matches
+        AND NOT "x${relname}" MATCHES "(^x|/)\\.ExternalData_" # not staged obj
+        )
+      if(IS_DIRECTORY "${top_src}/${entry}")
+        if("${relname}" STREQUAL "${reldata}")
+          set(have_original_as_dir 1)
+        endif()
+      else()
+        set(name "${top_src}/${relname}")
+        set(file "${top_bin}/${relname}")
+        if(alg)
+          list(APPEND external "${file}|${name}|${alg}")
+        elseif(ExternalData_LINK_CONTENT)
+          _ExternalData_link_content("${name}" alg)
+          list(APPEND external "${file}|${name}|${alg}")
+        elseif(NOT top_same)
+          list(APPEND internal "${file}|${name}")
+        endif()
+        if("${relname}" STREQUAL "${reldata}")
+          set(have_original 1)
+        endif()
+      endif()
+    endif()
+  endforeach()
+  set(external "${external}" PARENT_SCOPE)
+  set(internal "${internal}" PARENT_SCOPE)
+  set(have_original "${have_original}" PARENT_SCOPE)
+  set(have_original_as_dir "${have_original_as_dir}" PARENT_SCOPE)
+endfunction()
+
+#-----------------------------------------------------------------------------
+# Private script mode interface
+
+if(CMAKE_GENERATOR OR NOT ExternalData_ACTION)
+  return()
+endif()
+
+if(ExternalData_CONFIG)
+  include(${ExternalData_CONFIG})
+endif()
+if(NOT ExternalData_URL_TEMPLATES AND NOT ExternalData_OBJECT_STORES)
+  message(FATAL_ERROR
+    "Neither ExternalData_URL_TEMPLATES nor ExternalData_OBJECT_STORES is set!")
+endif()
+
+function(_ExternalData_link_or_copy src dst)
+  # Create a temporary file first.
+  get_filename_component(dst_dir "${dst}" PATH)
+  file(MAKE_DIRECTORY "${dst_dir}")
+  _ExternalData_random(random)
+  set(tmp "${dst}.tmp${random}")
+  if(UNIX AND NOT ExternalData_NO_SYMLINKS)
+    # Create a symbolic link.
+    set(tgt "${src}")
+    if(relative_top)
+      # Use relative path if files are close enough.
+      file(RELATIVE_PATH relsrc "${relative_top}" "${src}")
+      file(RELATIVE_PATH relfile "${relative_top}" "${dst}")
+      if(NOT IS_ABSOLUTE "${relsrc}" AND NOT "${relsrc}" MATCHES "^\\.\\./" AND
+          NOT IS_ABSOLUTE "${reldst}" AND NOT "${reldst}" MATCHES "^\\.\\./")
+        file(RELATIVE_PATH tgt "${dst_dir}" "${src}")
+      endif()
+    endif()
+    execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${tgt}" "${tmp}" RESULT_VARIABLE result)
+  else()
+    # Create a copy.
+    execute_process(COMMAND "${CMAKE_COMMAND}" -E copy "${src}" "${tmp}" RESULT_VARIABLE result)
+  endif()
+  if(result)
+    file(REMOVE "${tmp}")
+    message(FATAL_ERROR "Failed to create\n  ${tmp}\nfrom\n  ${obj}")
+  endif()
+
+  # Atomically create/replace the real destination.
+  file(RENAME "${tmp}" "${dst}")
+endfunction()
+
+function(_ExternalData_download_file url file err_var msg_var)
+  set(retry 3)
+  while(retry)
+    math(EXPR retry "${retry} - 1")
+    if(ExternalData_TIMEOUT_INACTIVITY)
+      set(inactivity_timeout INACTIVITY_TIMEOUT ${ExternalData_TIMEOUT_INACTIVITY})
+    elseif(NOT "${ExternalData_TIMEOUT_INACTIVITY}" EQUAL 0)
+      set(inactivity_timeout INACTIVITY_TIMEOUT 60)
+    else()
+      set(inactivity_timeout "")
+    endif()
+    if(ExternalData_TIMEOUT_ABSOLUTE)
+      set(absolute_timeout TIMEOUT ${ExternalData_TIMEOUT_ABSOLUTE})
+    elseif(NOT "${ExternalData_TIMEOUT_ABSOLUTE}" EQUAL 0)
+      set(absolute_timeout TIMEOUT 300)
+    else()
+      set(absolute_timeout "")
+    endif()
+    file(DOWNLOAD "${url}" "${file}" STATUS status LOG log ${inactivity_timeout} ${absolute_timeout} SHOW_PROGRESS)
+    list(GET status 0 err)
+    list(GET status 1 msg)
+    if(err)
+      if("${msg}" MATCHES "HTTP response code said error" AND
+          "${log}" MATCHES "error: 503")
+        set(msg "temporarily unavailable")
+      endif()
+    elseif("${log}" MATCHES "\nHTTP[^\n]* 503")
+      set(err TRUE)
+      set(msg "temporarily unavailable")
+    endif()
+    if(NOT err OR NOT "${msg}" MATCHES "partial|timeout|temporarily")
+      break()
+    elseif(retry)
+      message(STATUS "[download terminated: ${msg}, retries left: ${retry}]")
+    endif()
+  endwhile()
+  set("${err_var}" "${err}" PARENT_SCOPE)
+  set("${msg_var}" "${msg}" PARENT_SCOPE)
+endfunction()
+
+function(_ExternalData_custom_fetch key loc file err_var msg_var)
+  if(NOT ExternalData_CUSTOM_SCRIPT_${key})
+    set(err 1)
+    set(msg "No ExternalData_CUSTOM_SCRIPT_${key} set!")
+  elseif(NOT EXISTS "${ExternalData_CUSTOM_SCRIPT_${key}}")
+    set(err 1)
+    set(msg "No '${ExternalData_CUSTOM_SCRIPT_${key}}' exists!")
+  else()
+    set(ExternalData_CUSTOM_LOCATION "${loc}")
+    set(ExternalData_CUSTOM_FILE "${file}")
+    unset(ExternalData_CUSTOM_ERROR)
+    include("${ExternalData_CUSTOM_SCRIPT_${key}}")
+    if(DEFINED ExternalData_CUSTOM_ERROR)
+      set(err 1)
+      set(msg "${ExternalData_CUSTOM_ERROR}")
+    else()
+      set(err 0)
+      set(msg "no error")
+    endif()
+  endif()
+  set("${err_var}" "${err}" PARENT_SCOPE)
+  set("${msg_var}" "${msg}" PARENT_SCOPE)
+endfunction()
+
+function(_ExternalData_download_object name hash algo var_obj)
+  # Search all object stores for an existing object.
+  foreach(dir ${ExternalData_OBJECT_STORES})
+    set(obj "${dir}/${algo}/${hash}")
+    if(EXISTS "${obj}")
+      message(STATUS "Found object: \"${obj}\"")
+      set("${var_obj}" "${obj}" PARENT_SCOPE)
+      return()
+    endif()
+  endforeach()
+
+  # Download object to the first store.
+  list(GET ExternalData_OBJECT_STORES 0 store)
+  set(obj "${store}/${algo}/${hash}")
+
+  _ExternalData_random(random)
+  set(tmp "${obj}.tmp${random}")
+  set(found 0)
+  set(tried "")
+  foreach(url_template IN LISTS ExternalData_URL_TEMPLATES)
+    string(REPLACE "%(hash)" "${hash}" url_tmp "${url_template}")
+    string(REPLACE "%(algo)" "${algo}" url "${url_tmp}")
+    if(url MATCHES "^(.*)%\\(algo:([A-Za-z_][A-Za-z0-9_]*)\\)(.*)$")
+      set(lhs "${CMAKE_MATCH_1}")
+      set(key "${CMAKE_MATCH_2}")
+      set(rhs "${CMAKE_MATCH_3}")
+      if(DEFINED ExternalData_URL_ALGO_${algo}_${key})
+        set(url "${lhs}${ExternalData_URL_ALGO_${algo}_${key}}${rhs}")
+      else()
+        set(url "${lhs}${algo}${rhs}")
+      endif()
+    endif()
+    message(STATUS "Fetching \"${url}\"")
+    if(url MATCHES "^ExternalDataCustomScript://([A-Za-z_][A-Za-z0-9_]*)/(.*)$")
+      _ExternalData_custom_fetch("${CMAKE_MATCH_1}" "${CMAKE_MATCH_2}" "${tmp}" err errMsg)
+    else()
+      _ExternalData_download_file("${url}" "${tmp}" err errMsg)
+    endif()
+    set(tried "${tried}\n  ${url}")
+    if(err)
+      set(tried "${tried} (${errMsg})")
+    else()
+      # Verify downloaded object.
+      _ExternalData_compute_hash(dl_hash "${algo}" "${tmp}")
+      if("${dl_hash}" STREQUAL "${hash}")
+        set(found 1)
+        break()
+      else()
+        set(tried "${tried} (wrong hash ${algo}=${dl_hash})")
+        if("$ENV{ExternalData_DEBUG_DOWNLOAD}" MATCHES ".")
+          file(RENAME "${tmp}" "${store}/${algo}/${dl_hash}")
+        endif()
+      endif()
+    endif()
+    file(REMOVE "${tmp}")
+  endforeach()
+
+  get_filename_component(dir "${name}" PATH)
+  set(staged "${dir}/.ExternalData_${algo}_${hash}")
+
+  if(found)
+    file(RENAME "${tmp}" "${obj}")
+    message(STATUS "Downloaded object: \"${obj}\"")
+  elseif(EXISTS "${staged}")
+    set(obj "${staged}")
+    message(STATUS "Staged object: \"${obj}\"")
+  else()
+    if(NOT tried)
+      set(tried "\n  (No ExternalData_URL_TEMPLATES given)")
+    endif()
+    message(FATAL_ERROR "Object ${algo}=${hash} not found at:${tried}")
+  endif()
+
+  set("${var_obj}" "${obj}" PARENT_SCOPE)
+endfunction()
+
+if("${ExternalData_ACTION}" STREQUAL "fetch")
+  foreach(v ExternalData_OBJECT_STORES file name ext)
+    if(NOT DEFINED "${v}")
+      message(FATAL_ERROR "No \"-D${v}=\" value provided!")
+    endif()
+  endforeach()
+
+  file(READ "${name}${ext}" hash)
+  string(STRIP "${hash}" hash)
+
+  if("${ext}" MATCHES "^\\.(${_ExternalData_REGEX_EXT})$")
+    string(TOUPPER "${CMAKE_MATCH_1}" algo)
+  else()
+    message(FATAL_ERROR "Unknown hash algorithm extension \"${ext}\"")
+  endif()
+
+  _ExternalData_download_object("${name}" "${hash}" "${algo}" obj)
+
+  # Check if file already corresponds to the object.
+  set(stamp "${ext}-stamp")
+  set(file_up_to_date 0)
+  if(EXISTS "${file}" AND EXISTS "${file}${stamp}")
+    file(READ "${file}${stamp}" f_hash)
+    string(STRIP "${f_hash}" f_hash)
+    if("${f_hash}" STREQUAL "${hash}")
+      #message(STATUS "File already corresponds to object")
+      set(file_up_to_date 1)
+    endif()
+  endif()
+
+  if(file_up_to_date)
+    # Touch the file to convince the build system it is up to date.
+    execute_process(COMMAND "${CMAKE_COMMAND}" -E touch "${file}")
+  else()
+    _ExternalData_link_or_copy("${obj}" "${file}")
+  endif()
+
+  # Atomically update the hash/timestamp file to record the object referenced.
+  _ExternalData_atomic_write("${file}${stamp}" "${hash}\n")
+elseif("${ExternalData_ACTION}" STREQUAL "local")
+  foreach(v file name)
+    if(NOT DEFINED "${v}")
+      message(FATAL_ERROR "No \"-D${v}=\" value provided!")
+    endif()
+  endforeach()
+  _ExternalData_link_or_copy("${name}" "${file}")
+else()
+  message(FATAL_ERROR "Unknown ExternalData_ACTION=[${ExternalData_ACTION}]")
+endif()
diff --git a/share/cmake-3.6/Modules/ExternalData_config.cmake.in b/share/cmake-3.6/Modules/ExternalData_config.cmake.in
new file mode 100644
index 0000000..18be6b3
--- /dev/null
+++ b/share/cmake-3.6/Modules/ExternalData_config.cmake.in
@@ -0,0 +1,6 @@
+set(ExternalData_OBJECT_STORES "@ExternalData_OBJECT_STORES@")
+set(ExternalData_URL_TEMPLATES "@ExternalData_URL_TEMPLATES@")
+set(ExternalData_TIMEOUT_INACTIVITY "@ExternalData_TIMEOUT_INACTIVITY@")
+set(ExternalData_TIMEOUT_ABSOLUTE "@ExternalData_TIMEOUT_ABSOLUTE@")
+set(ExternalData_NO_SYMLINKS "@ExternalData_NO_SYMLINKS@")
+@_ExternalData_CONFIG_CODE@
diff --git a/share/cmake-3.6/Modules/ExternalProject-download.cmake.in b/share/cmake-3.6/Modules/ExternalProject-download.cmake.in
new file mode 100644
index 0000000..5b73cd8
--- /dev/null
+++ b/share/cmake-3.6/Modules/ExternalProject-download.cmake.in
@@ -0,0 +1,161 @@
+#=============================================================================
+# Copyright 2008-2013 Kitware, Inc.
+# Copyright 2016 Ruslan Baratov
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+cmake_minimum_required(VERSION 3.5)
+
+function(check_file_hash has_hash hash_is_good)
+  if("${has_hash}" STREQUAL "")
+    message(FATAL_ERROR "has_hash Can't be empty")
+  endif()
+
+  if("${hash_is_good}" STREQUAL "")
+    message(FATAL_ERROR "hash_is_good Can't be empty")
+  endif()
+
+  if("@ALGO@" STREQUAL "")
+    # No check
+    set("${has_hash}" FALSE PARENT_SCOPE)
+    set("${hash_is_good}" FALSE PARENT_SCOPE)
+    return()
+  endif()
+
+  set("${has_hash}" TRUE PARENT_SCOPE)
+
+  message(STATUS "verifying file...
+       file='@LOCAL@'")
+
+  file("@ALGO@" "@LOCAL@" actual_value)
+
+  if(NOT "${actual_value}" STREQUAL "@EXPECT_VALUE@")
+    set("${hash_is_good}" FALSE PARENT_SCOPE)
+    message(STATUS "@ALGO@ hash of
+    @LOCAL@
+  does not match expected value
+    expected: '@EXPECT_VALUE@'
+      actual: '${actual_value}'")
+  else()
+    set("${hash_is_good}" TRUE PARENT_SCOPE)
+  endif()
+endfunction()
+
+function(sleep_before_download attempt)
+  if(attempt EQUAL 0)
+    return()
+  endif()
+
+  if(attempt EQUAL 1)
+    message(STATUS "Retrying...")
+    return()
+  endif()
+
+  set(sleep_seconds 0)
+
+  if(attempt EQUAL 2)
+    set(sleep_seconds 5)
+  elseif(attempt EQUAL 3)
+    set(sleep_seconds 5)
+  elseif(attempt EQUAL 4)
+    set(sleep_seconds 15)
+  elseif(attempt EQUAL 5)
+    set(sleep_seconds 60)
+  elseif(attempt EQUAL 6)
+    set(sleep_seconds 90)
+  elseif(attempt EQUAL 7)
+    set(sleep_seconds 300)
+  else()
+    set(sleep_seconds 1200)
+  endif()
+
+  message(STATUS "Retry after ${sleep_seconds} seconds (attempt #${attempt}) ...")
+
+  execute_process(COMMAND "${CMAKE_COMMAND}" -E sleep "${sleep_seconds}")
+endfunction()
+
+if("@LOCAL@" STREQUAL "")
+  message(FATAL_ERROR "LOCAL can't be empty")
+endif()
+
+if("@REMOTE@" STREQUAL "")
+  message(FATAL_ERROR "REMOTE can't be empty")
+endif()
+
+if(EXISTS "@LOCAL@")
+  check_file_hash(has_hash hash_is_good)
+  if(has_hash)
+    if(hash_is_good)
+      message(STATUS "File already exists and hash match (skip download):
+  file='@LOCAL@'
+  @ALGO@='@EXPECT_VALUE@'"
+      )
+      return()
+    else()
+      message(STATUS "File already exists but hash mismatch. Removing...")
+      file(REMOVE "@LOCAL@")
+    endif()
+  else()
+    message(STATUS "File already exists but no hash specified (use URL_HASH):
+  file='@LOCAL@'
+Old file will be removed and new file downloaded from URL."
+    )
+    file(REMOVE "@LOCAL@")
+  endif()
+endif()
+
+set(retry_number 5)
+
+foreach(i RANGE ${retry_number})
+  sleep_before_download(${i})
+
+  message(STATUS "downloading...
+       src='@REMOTE@'
+       dst='@LOCAL@'
+       timeout='@TIMEOUT_MSG@'")
+
+  @TLS_VERIFY_CODE@
+  @TLS_CAINFO_CODE@
+
+  file(
+      DOWNLOAD
+      "@REMOTE@" "@LOCAL@"
+      @SHOW_PROGRESS@
+      @TIMEOUT_ARGS@
+      STATUS status
+      LOG log
+  )
+
+  list(GET status 0 status_code)
+  list(GET status 1 status_string)
+
+  if(status_code EQUAL 0)
+    check_file_hash(has_hash hash_is_good)
+    if(has_hash AND NOT hash_is_good)
+      message(STATUS "Hash mismatch, removing...")
+      file(REMOVE "@LOCAL@")
+    else()
+      message(STATUS "Downloading... done")
+      return()
+    endif()
+  else()
+    message("error: downloading '@REMOTE@' failed
+  status_code: ${status_code}
+  status_string: ${status_string}
+  log:
+  --- LOG BEGIN ---
+  ${log}
+  --- LOG END ---"
+    )
+  endif()
+endforeach()
+
+message(FATAL_ERROR "Downloading failed")
diff --git a/share/cmake-3.6/Modules/ExternalProject-verify.cmake.in b/share/cmake-3.6/Modules/ExternalProject-verify.cmake.in
new file mode 100644
index 0000000..1d8db96
--- /dev/null
+++ b/share/cmake-3.6/Modules/ExternalProject-verify.cmake.in
@@ -0,0 +1,48 @@
+#=============================================================================
+# Copyright 2008-2013 Kitware, Inc.
+# Copyright 2016 Ruslan Baratov
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+cmake_minimum_required(VERSION 3.5)
+
+if("@LOCAL@" STREQUAL "")
+  message(FATAL_ERROR "LOCAL can't be empty")
+endif()
+
+if(NOT EXISTS "@LOCAL@")
+  message(FATAL_ERROR "File not found: @LOCAL@")
+endif()
+
+if("@ALGO@" STREQUAL "")
+  message(WARNING "File will not be verified since no URL_HASH specified")
+  return()
+endif()
+
+if("@EXPECT_VALUE@" STREQUAL "")
+  message(FATAL_ERROR "EXPECT_VALUE can't be empty")
+endif()
+
+message(STATUS "verifying file...
+     file='@LOCAL@'")
+
+file("@ALGO@" "@LOCAL@" actual_value)
+
+if(NOT "${actual_value}" STREQUAL "@EXPECT_VALUE@")
+  message(FATAL_ERROR "error: @ALGO@ hash of
+  @LOCAL@
+does not match expected value
+  expected: '@EXPECT_VALUE@'
+    actual: '${actual_value}'
+")
+endif()
+
+message(STATUS "verifying file... done")
diff --git a/share/cmake-3.6/Modules/ExternalProject.cmake b/share/cmake-3.6/Modules/ExternalProject.cmake
new file mode 100644
index 0000000..2ff18fc
--- /dev/null
+++ b/share/cmake-3.6/Modules/ExternalProject.cmake
@@ -0,0 +1,2484 @@
+#[=======================================================================[.rst:
+ExternalProject
+---------------
+
+Create custom targets to build projects in external trees
+
+.. command:: ExternalProject_Add
+
+  The ``ExternalProject_Add`` function creates a custom target to drive
+  download, update/patch, configure, build, install and test steps of an
+  external project::
+
+   ExternalProject_Add(<name> [<option>...])
+
+  General options are:
+
+  ``DEPENDS <projects>...``
+    Targets on which the project depends
+  ``PREFIX <dir>``
+    Root dir for entire project
+  ``LIST_SEPARATOR <sep>``
+    Sep to be replaced by ; in cmd lines
+  ``TMP_DIR <dir>``
+    Directory to store temporary files
+  ``STAMP_DIR <dir>``
+    Directory to store step timestamps
+  ``EXCLUDE_FROM_ALL 1``
+    The "all" target does not depend on this
+
+  Download step options are:
+
+  ``DOWNLOAD_NAME <fname>``
+    File name to store (if not end of URL)
+  ``DOWNLOAD_DIR <dir>``
+    Directory to store downloaded files
+  ``DOWNLOAD_COMMAND <cmd>...``
+    Command to download source tree
+  ``DOWNLOAD_NO_PROGRESS 1``
+    Disable download progress reports
+  ``CVS_REPOSITORY <cvsroot>``
+    CVSROOT of CVS repository
+  ``CVS_MODULE <mod>``
+    Module to checkout from CVS repo
+  ``CVS_TAG <tag>``
+    Tag to checkout from CVS repo
+  ``SVN_REPOSITORY <url>``
+    URL of Subversion repo
+  ``SVN_REVISION -r<rev>``
+    Revision to checkout from Subversion repo
+  ``SVN_USERNAME <username>``
+    Username for Subversion checkout and update
+  ``SVN_PASSWORD <password>``
+    Password for Subversion checkout and update
+  ``SVN_TRUST_CERT 1``
+    Trust the Subversion server site certificate
+  ``GIT_REPOSITORY <url>``
+    URL of git repo
+  ``GIT_TAG <tag>``
+    Git branch name, commit id or tag
+  ``GIT_REMOTE_NAME <name>``
+    The optional name of the remote, default to ``origin``
+  ``GIT_SUBMODULES <module>...``
+    Git submodules that shall be updated, all if empty
+  ``GIT_SHALLOW 1``
+    Tell Git to clone with ``--depth 1``.   Use when ``GIT_TAG`` is not
+    specified or when it names a branch in order to download only the
+    tip of the branch without the rest of its history.
+  ``HG_REPOSITORY <url>``
+    URL of mercurial repo
+  ``HG_TAG <tag>``
+    Mercurial branch name, commit id or tag
+  ``URL /.../src.tgz``
+    Full path or URL of source
+  ``URL_HASH ALGO=value``
+    Hash of file at URL
+  ``URL_MD5 md5``
+    Equivalent to URL_HASH MD5=md5
+  ``TLS_VERIFY <bool>``
+    Should certificate for https be checked
+  ``TLS_CAINFO <file>``
+    Path to a certificate authority file
+  ``TIMEOUT <seconds>``
+    Time allowed for file download operations
+  ``DOWNLOAD_NO_EXTRACT 1``
+    Just download the file and do not extract it; the full path to the
+    downloaded file is available as ``<DOWNLOADED_FILE>``.
+
+  Update/Patch step options are:
+
+  ``UPDATE_COMMAND <cmd>...``
+    Source work-tree update command
+  ``UPDATE_DISCONNECTED 1``
+    Never update automatically from the remote repository
+  ``PATCH_COMMAND <cmd>...``
+    Command to patch downloaded source
+
+  Configure step options are:
+
+  ``SOURCE_DIR <dir>``
+    Source dir to be used for build
+  ``CONFIGURE_COMMAND <cmd>...``
+    Build tree configuration command
+  ``CMAKE_COMMAND /.../cmake``
+    Specify alternative cmake executable
+  ``CMAKE_GENERATOR <gen>``
+    Specify generator for native build
+  ``CMAKE_GENERATOR_PLATFORM <platform>``
+    Generator-specific platform name
+  ``CMAKE_GENERATOR_TOOLSET <toolset>``
+    Generator-specific toolset name
+  ``CMAKE_ARGS <arg>...``
+    Arguments to CMake command line.
+    These arguments are passed to CMake command line, and can contain
+    arguments other than cache values, see also
+    :manual:`CMake Options <cmake(1)>`. Arguments in the form
+    ``-Dvar:string=on`` are always passed to the command line, and
+    therefore cannot be changed by the user.
+    Arguments may use
+    :manual:`generator expressions <cmake-generator-expressions(7)>`.
+  ``CMAKE_CACHE_ARGS <arg>...``
+    Initial cache arguments, of the form ``-Dvar:string=on``.
+    These arguments are written in a pre-load a script that populates
+    CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows one to
+    overcome command line length limits.
+    These arguments are :command:`set` using the ``FORCE`` argument,
+    and therefore cannot be changed by the user.
+    Arguments may use
+    :manual:`generator expressions <cmake-generator-expressions(7)>`.
+  ``CMAKE_CACHE_DEFAULT_ARGS <arg>...``
+    Initial default cache arguments, of the form ``-Dvar:string=on``.
+    These arguments are written in a pre-load a script that populates
+    CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows one to
+    overcome command line length limits.
+    These arguments can be used as default value that will be set if no
+    previous value is found in the cache, and that the user can change
+    later.
+    Arguments may use
+    :manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+  Build step options are:
+
+  ``BINARY_DIR <dir>``
+    Specify build dir location
+  ``BUILD_COMMAND <cmd>...``
+    Command to drive the native build
+  ``BUILD_IN_SOURCE 1``
+    Use source dir for build dir
+  ``BUILD_ALWAYS 1``
+    No stamp file, build step always runs
+  ``BUILD_BYPRODUCTS <file>...``
+    Files that will be generated by the build command but may or may
+    not have their modification time updated by subsequent builds.
+
+  Install step options are:
+
+  ``INSTALL_DIR <dir>``
+    Installation prefix
+  ``INSTALL_COMMAND <cmd>...``
+    Command to drive install after build
+
+  Test step options are:
+
+  ``TEST_BEFORE_INSTALL 1``
+    Add test step executed before install step
+  ``TEST_AFTER_INSTALL 1``
+    Add test step executed after install step
+  ``TEST_EXCLUDE_FROM_MAIN 1``
+    Main target does not depend on the test step
+  ``TEST_COMMAND <cmd>...``
+    Command to drive test
+
+  Output logging options are:
+
+  ``LOG_DOWNLOAD 1``
+    Wrap download in script to log output
+  ``LOG_UPDATE 1``
+    Wrap update in script to log output
+  ``LOG_CONFIGURE 1``
+    Wrap configure in script to log output
+  ``LOG_BUILD 1``
+    Wrap build in script to log output
+  ``LOG_TEST 1``
+    Wrap test in script to log output
+  ``LOG_INSTALL 1``
+    Wrap install in script to log output
+
+  Steps can be given direct access to the terminal if possible.  With
+  the :generator:`Ninja` generator, this places the steps in the
+  ``console`` :prop_gbl:`pool <JOB_POOLS>`.  Options are:
+
+  ``USES_TERMINAL_DOWNLOAD 1``
+    Give download terminal access.
+  ``USES_TERMINAL_UPDATE 1``
+    Give update terminal access.
+  ``USES_TERMINAL_CONFIGURE 1``
+    Give configure terminal access.
+  ``USES_TERMINAL_BUILD 1``
+    Give build terminal access.
+  ``USES_TERMINAL_TEST 1``
+    Give test terminal access.
+  ``USES_TERMINAL_INSTALL 1``
+    Give install terminal access.
+
+  Other options are:
+
+  ``STEP_TARGETS <step-target>...``
+    Generate custom targets for these steps
+  ``INDEPENDENT_STEP_TARGETS <step-target>...``
+    Generate custom targets for these steps that do not depend on other
+    external projects even if a dependency is set
+
+  The ``*_DIR`` options specify directories for the project, with default
+  directories computed as follows.  If the ``PREFIX`` option is given to
+  ``ExternalProject_Add()`` or the ``EP_PREFIX`` directory property is set,
+  then an external project is built and installed under the specified prefix::
+
+   TMP_DIR      = <prefix>/tmp
+   STAMP_DIR    = <prefix>/src/<name>-stamp
+   DOWNLOAD_DIR = <prefix>/src
+   SOURCE_DIR   = <prefix>/src/<name>
+   BINARY_DIR   = <prefix>/src/<name>-build
+   INSTALL_DIR  = <prefix>
+
+  Otherwise, if the ``EP_BASE`` directory property is set then components
+  of an external project are stored under the specified base::
+
+   TMP_DIR      = <base>/tmp/<name>
+   STAMP_DIR    = <base>/Stamp/<name>
+   DOWNLOAD_DIR = <base>/Download/<name>
+   SOURCE_DIR   = <base>/Source/<name>
+   BINARY_DIR   = <base>/Build/<name>
+   INSTALL_DIR  = <base>/Install/<name>
+
+  If no ``PREFIX``, ``EP_PREFIX``, or ``EP_BASE`` is specified then the
+  default is to set ``PREFIX`` to ``<name>-prefix``.  Relative paths are
+  interpreted with respect to the build directory corresponding to the
+  source directory in which ``ExternalProject_Add`` is invoked.
+
+  If ``SOURCE_DIR`` is explicitly set to an existing directory the project
+  will be built from it.  Otherwise a download step must be specified
+  using one of the ``DOWNLOAD_COMMAND``, ``CVS_*``, ``SVN_*``, or ``URL``
+  options.  The ``URL`` option may refer locally to a directory or source
+  tarball, or refer to a remote tarball (e.g. ``http://.../src.tgz``).
+
+  If ``UPDATE_DISCONNECTED`` is set, the update step is not executed
+  automatically when building the main target. The update step can still
+  be added as a step target and called manually. This is useful if you
+  want to allow one to build the project when you are disconnected from the
+  network (you might still need the network for the download step).
+  This is disabled by default.
+  The directory property ``EP_UPDATE_DISCONNECTED`` can be used to change
+  the default value for all the external projects in the current
+  directory and its subdirectories.
+
+.. command:: ExternalProject_Add_Step
+
+  The ``ExternalProject_Add_Step`` function adds a custom step to an
+  external project::
+
+   ExternalProject_Add_Step(<name> <step> [<option>...])
+
+  Options are:
+
+  ``COMMAND <cmd>...``
+    Command line invoked by this step
+  ``COMMENT "<text>..."``
+    Text printed when step executes
+  ``DEPENDEES <step>...``
+    Steps on which this step depends
+  ``DEPENDERS <step>...``
+    Steps that depend on this step
+  ``DEPENDS <file>...``
+    Files on which this step depends
+  ``BYPRODUCTS <file>...``
+    Files that will be generated by this step but may or may not
+    have their modification time updated by subsequent builds.
+  ``ALWAYS 1``
+    No stamp file, step always runs
+  ``EXCLUDE_FROM_MAIN 1``
+    Main target does not depend on this step
+  ``WORKING_DIRECTORY <dir>``
+    Working directory for command
+  ``LOG 1``
+    Wrap step in script to log output
+  ``USES_TERMINAL 1``
+    Give the step direct access to the terminal if possible.
+
+  The command line, comment, working directory, and byproducts of every
+  standard and custom step are processed to replace tokens ``<SOURCE_DIR>``,
+  ``<BINARY_DIR>``, ``<INSTALL_DIR>``, and ``<TMP_DIR>`` with
+  corresponding property values.
+
+Any builtin step that specifies a ``<step>_COMMAND cmd...`` or custom
+step that specifies a ``COMMAND cmd...`` may specify additional command
+lines using the form ``COMMAND cmd...``.  At build time the commands
+will be executed in order and aborted if any one fails.  For example::
+
+ ... BUILD_COMMAND make COMMAND echo done ...
+
+specifies to run ``make`` and then ``echo done`` during the build step.
+Whether the current working directory is preserved between commands is
+not defined.  Behavior of shell operators like ``&&`` is not defined.
+
+Arguments to ``<step>_COMMAND`` or ``COMMAND`` options may use
+:manual:`generator expressions <cmake-generator-expressions(7)>`.
+
+.. command:: ExternalProject_Get_Property
+
+  The ``ExternalProject_Get_Property`` function retrieves external project
+  target properties::
+
+    ExternalProject_Get_Property(<name> [prop1 [prop2 [...]]])
+
+  It stores property values in variables of the same name.  Property
+  names correspond to the keyword argument names of
+  ``ExternalProject_Add``.
+
+.. command:: ExternalProject_Add_StepTargets
+
+  The ``ExternalProject_Add_StepTargets`` function generates custom
+  targets for the steps listed::
+
+    ExternalProject_Add_StepTargets(<name> [NO_DEPENDS] [step1 [step2 [...]]])
+
+If ``NO_DEPENDS`` is set, the target will not depend on the
+dependencies of the complete project. This is usually safe to use for
+the download, update, and patch steps that do not require that all the
+dependencies are updated and built.  Using ``NO_DEPENDS`` for other
+of the default steps might break parallel builds, so you should avoid,
+it.  For custom steps, you should consider whether or not the custom
+commands requires that the dependencies are configured, built and
+installed.
+
+If ``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` is set then
+``ExternalProject_Add_StepTargets`` is automatically called at the end
+of matching calls to ``ExternalProject_Add_Step``.  Pass
+``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` explicitly to
+individual ``ExternalProject_Add`` calls, or implicitly to all
+``ExternalProject_Add`` calls by setting the directory properties
+``EP_STEP_TARGETS`` and ``EP_INDEPENDENT_STEP_TARGETS``.  The
+``INDEPENDENT`` version of the argument and of the property will call
+``ExternalProject_Add_StepTargets`` with the ``NO_DEPENDS`` argument.
+
+If ``STEP_TARGETS`` and ``INDEPENDENT_STEP_TARGETS`` are not set,
+clients may still manually call ``ExternalProject_Add_StepTargets``
+after calling ``ExternalProject_Add`` or ``ExternalProject_Add_Step``.
+
+This functionality is provided to make it easy to drive the steps
+independently of each other by specifying targets on build command
+lines.  For example, you may be submitting to a sub-project based
+dashboard, where you want to drive the configure portion of the build,
+then submit to the dashboard, followed by the build portion, followed
+by tests.  If you invoke a custom target that depends on a step
+halfway through the step dependency chain, then all the previous steps
+will also run to ensure everything is up to date.
+
+For example, to drive configure, build and test steps independently
+for each ``ExternalProject_Add`` call in your project, write the following
+line prior to any ``ExternalProject_Add`` calls in your ``CMakeLists.txt``
+file::
+
+ set_property(DIRECTORY PROPERTY EP_STEP_TARGETS configure build test)
+
+.. command:: ExternalProject_Add_StepDependencies
+
+  The ``ExternalProject_Add_StepDependencies`` function add some
+  dependencies for some external project step::
+
+    ExternalProject_Add_StepDependencies(<name> <step> [target1 [target2 [...]]])
+
+  This function takes care to set both target and file level
+  dependencies, and will ensure that parallel builds will not break.
+  It should be used instead of :command:`add_dependencies()` when adding
+  a dependency for some of the step targets generated by
+  ``ExternalProject``.
+#]=======================================================================]
+
+#=============================================================================
+# Copyright 2008-2013 Kitware, Inc.
+# Copyright 2016 Ruslan Baratov
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Pre-compute a regex to match documented keywords for each command.
+math(EXPR _ep_documentation_line_count "${CMAKE_CURRENT_LIST_LINE} - 16")
+file(STRINGS "${CMAKE_CURRENT_LIST_FILE}" lines
+     LIMIT_COUNT ${_ep_documentation_line_count}
+     REGEX "^\\.\\. command:: [A-Za-z0-9_]+|^  ``[A-Z0-9_]+ .*``$")
+foreach(line IN LISTS lines)
+  if("${line}" MATCHES "^\\.\\. command:: ([A-Za-z0-9_]+)")
+    if(_ep_func)
+      set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}})$")
+    endif()
+    set(_ep_func "${CMAKE_MATCH_1}")
+    #message("function [${_ep_func}]")
+    set(_ep_keywords_${_ep_func} "^(")
+    set(_ep_keyword_sep)
+  elseif("${line}" MATCHES "^  ``([A-Z0-9_]+) .*``$")
+    set(_ep_key "${CMAKE_MATCH_1}")
+    #message("  keyword [${_ep_key}]")
+    set(_ep_keywords_${_ep_func}
+      "${_ep_keywords_${_ep_func}}${_ep_keyword_sep}${_ep_key}")
+    set(_ep_keyword_sep "|")
+  endif()
+endforeach()
+if(_ep_func)
+  set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}})$")
+endif()
+
+# Save regex matching supported hash algorithm names.
+set(_ep_hash_algos "MD5|SHA1|SHA224|SHA256|SHA384|SHA512")
+set(_ep_hash_regex "^(${_ep_hash_algos})=([0-9A-Fa-f]+)$")
+
+set(_ExternalProject_SELF "${CMAKE_CURRENT_LIST_FILE}")
+get_filename_component(_ExternalProject_SELF_DIR "${_ExternalProject_SELF}" PATH)
+
+function(_ep_parse_arguments f name ns args)
+  # Transfer the arguments to this function into target properties for the
+  # new custom target we just added so that we can set up all the build steps
+  # correctly based on target properties.
+  #
+  # We loop through ARGN and consider the namespace starting with an
+  # upper-case letter followed by at least two more upper-case letters,
+  # numbers or underscores to be keywords.
+  set(key)
+
+  foreach(arg IN LISTS args)
+    set(is_value 1)
+
+    if(arg MATCHES "^[A-Z][A-Z0-9_][A-Z0-9_]+$" AND
+        NOT (("x${arg}x" STREQUAL "x${key}x") AND ("x${key}x" STREQUAL "xCOMMANDx")) AND
+        NOT arg MATCHES "^(TRUE|FALSE)$")
+      if(_ep_keywords_${f} AND arg MATCHES "${_ep_keywords_${f}}")
+        set(is_value 0)
+      endif()
+    endif()
+
+    if(is_value)
+      if(key)
+        # Value
+        if(NOT arg STREQUAL "")
+          set_property(TARGET ${name} APPEND PROPERTY ${ns}${key} "${arg}")
+        else()
+          get_property(have_key TARGET ${name} PROPERTY ${ns}${key} SET)
+          if(have_key)
+            get_property(value TARGET ${name} PROPERTY ${ns}${key})
+            set_property(TARGET ${name} PROPERTY ${ns}${key} "${value};${arg}")
+          else()
+            set_property(TARGET ${name} PROPERTY ${ns}${key} "${arg}")
+          endif()
+        endif()
+      else()
+        # Missing Keyword
+        message(AUTHOR_WARNING "value '${arg}' with no previous keyword in ${f}")
+      endif()
+    else()
+      set(key "${arg}")
+    endif()
+  endforeach()
+endfunction()
+
+
+define_property(DIRECTORY PROPERTY "EP_BASE" INHERITED
+  BRIEF_DOCS "Base directory for External Project storage."
+  FULL_DOCS
+  "See documentation of the ExternalProject_Add() function in the "
+  "ExternalProject module."
+  )
+
+define_property(DIRECTORY PROPERTY "EP_PREFIX" INHERITED
+  BRIEF_DOCS "Top prefix for External Project storage."
+  FULL_DOCS
+  "See documentation of the ExternalProject_Add() function in the "
+  "ExternalProject module."
+  )
+
+define_property(DIRECTORY PROPERTY "EP_STEP_TARGETS" INHERITED
+  BRIEF_DOCS
+  "List of ExternalProject steps that automatically get corresponding targets"
+  FULL_DOCS
+  "These targets will be dependent on the main target dependencies"
+  "See documentation of the ExternalProject_Add_StepTargets() function in the "
+  "ExternalProject module."
+  )
+
+define_property(DIRECTORY PROPERTY "EP_INDEPENDENT_STEP_TARGETS" INHERITED
+  BRIEF_DOCS
+  "List of ExternalProject steps that automatically get corresponding targets"
+  FULL_DOCS
+  "These targets will not be dependent on the main target dependencies"
+  "See documentation of the ExternalProject_Add_StepTargets() function in the "
+  "ExternalProject module."
+  )
+
+define_property(DIRECTORY PROPERTY "EP_UPDATE_DISCONNECTED" INHERITED
+  BRIEF_DOCS "Never update automatically from the remote repo."
+  FULL_DOCS
+  "See documentation of the ExternalProject_Add() function in the "
+  "ExternalProject module."
+  )
+
+function(_ep_write_gitclone_script script_filename source_dir git_EXECUTABLE git_repository git_tag git_remote_name git_submodules git_shallow src_name work_dir gitclone_infofile gitclone_stampfile tls_verify)
+  if(NOT GIT_VERSION_STRING VERSION_LESS 1.7.10)
+    set(git_clone_shallow_options "--depth 1 --no-single-branch")
+  else()
+    set(git_clone_shallow_options "--depth 1")
+  endif()
+  file(WRITE ${script_filename}
+"if(\"${git_tag}\" STREQUAL \"\")
+  message(FATAL_ERROR \"Tag for git checkout should not be empty.\")
+endif()
+
+set(run 0)
+
+if(\"${gitclone_infofile}\" IS_NEWER_THAN \"${gitclone_stampfile}\")
+  set(run 1)
+endif()
+
+if(NOT run)
+  message(STATUS \"Avoiding repeated git clone, stamp file is up to date: '${gitclone_stampfile}'\")
+  return()
+endif()
+
+execute_process(
+  COMMAND \${CMAKE_COMMAND} -E remove_directory \"${source_dir}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to remove directory: '${source_dir}'\")
+endif()
+
+set(git_options)
+
+# disable cert checking if explicitly told not to do it
+set(tls_verify \"${tls_verify}\")
+if(NOT \"x${tls_verify}\" STREQUAL \"x\" AND NOT tls_verify)
+  list(APPEND git_options
+    -c http.sslVerify=false)
+endif()
+
+set(git_clone_options)
+
+set(git_shallow \"${git_shallow}\")
+if(git_shallow)
+  list(APPEND git_clone_options ${git_clone_shallow_options})
+endif()
+
+# try the clone 3 times incase there is an odd git clone issue
+set(error_code 1)
+set(number_of_tries 0)
+while(error_code AND number_of_tries LESS 3)
+  execute_process(
+    COMMAND \"${git_EXECUTABLE}\" \${git_options} clone \${git_clone_options} --origin \"${git_remote_name}\" \"${git_repository}\" \"${src_name}\"
+    WORKING_DIRECTORY \"${work_dir}\"
+    RESULT_VARIABLE error_code
+    )
+  math(EXPR number_of_tries \"\${number_of_tries} + 1\")
+endwhile()
+if(number_of_tries GREATER 1)
+  message(STATUS \"Had to git clone more than once:
+          \${number_of_tries} times.\")
+endif()
+if(error_code)
+  message(FATAL_ERROR \"Failed to clone repository: '${git_repository}'\")
+endif()
+
+execute_process(
+  COMMAND \"${git_EXECUTABLE}\" \${git_options} checkout ${git_tag}
+  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to checkout tag: '${git_tag}'\")
+endif()
+
+execute_process(
+  COMMAND \"${git_EXECUTABLE}\" \${git_options} submodule init ${git_submodules}
+  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to init submodules in: '${work_dir}/${src_name}'\")
+endif()
+
+execute_process(
+  COMMAND \"${git_EXECUTABLE}\" \${git_options} submodule update --recursive --init ${git_submodules}
+  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to update submodules in: '${work_dir}/${src_name}'\")
+endif()
+
+# Complete success, update the script-last-run stamp file:
+#
+execute_process(
+  COMMAND \${CMAKE_COMMAND} -E copy
+    \"${gitclone_infofile}\"
+    \"${gitclone_stampfile}\"
+  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to copy script-last-run stamp file: '${gitclone_stampfile}'\")
+endif()
+
+"
+)
+
+endfunction()
+
+function(_ep_write_hgclone_script script_filename source_dir hg_EXECUTABLE hg_repository hg_tag src_name work_dir hgclone_infofile hgclone_stampfile)
+  file(WRITE ${script_filename}
+"if(\"${hg_tag}\" STREQUAL \"\")
+  message(FATAL_ERROR \"Tag for hg checkout should not be empty.\")
+endif()
+
+set(run 0)
+
+if(\"${hgclone_infofile}\" IS_NEWER_THAN \"${hgclone_stampfile}\")
+  set(run 1)
+endif()
+
+if(NOT run)
+  message(STATUS \"Avoiding repeated hg clone, stamp file is up to date: '${hgclone_stampfile}'\")
+  return()
+endif()
+
+execute_process(
+  COMMAND \${CMAKE_COMMAND} -E remove_directory \"${source_dir}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to remove directory: '${source_dir}'\")
+endif()
+
+execute_process(
+  COMMAND \"${hg_EXECUTABLE}\" clone -U \"${hg_repository}\" \"${src_name}\"
+  WORKING_DIRECTORY \"${work_dir}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to clone repository: '${hg_repository}'\")
+endif()
+
+execute_process(
+  COMMAND \"${hg_EXECUTABLE}\" update ${hg_tag}
+  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to checkout tag: '${hg_tag}'\")
+endif()
+
+# Complete success, update the script-last-run stamp file:
+#
+execute_process(
+  COMMAND \${CMAKE_COMMAND} -E copy
+    \"${hgclone_infofile}\"
+    \"${hgclone_stampfile}\"
+  WORKING_DIRECTORY \"${work_dir}/${src_name}\"
+  RESULT_VARIABLE error_code
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to copy script-last-run stamp file: '${hgclone_stampfile}'\")
+endif()
+
+"
+)
+
+endfunction()
+
+
+function(_ep_write_gitupdate_script script_filename git_EXECUTABLE git_tag git_remote_name git_submodules git_repository work_dir)
+  if(NOT GIT_VERSION_STRING VERSION_LESS 1.7.6)
+    set(git_stash_save_options --all --quiet)
+  else()
+    set(git_stash_save_options --quiet)
+  endif()
+  file(WRITE ${script_filename}
+"if(\"${git_tag}\" STREQUAL \"\")
+  message(FATAL_ERROR \"Tag for git checkout should not be empty.\")
+endif()
+
+execute_process(
+  COMMAND \"${git_EXECUTABLE}\" rev-list --max-count=1 HEAD
+  WORKING_DIRECTORY \"${work_dir}\"
+  RESULT_VARIABLE error_code
+  OUTPUT_VARIABLE head_sha
+  OUTPUT_STRIP_TRAILING_WHITESPACE
+  )
+if(error_code)
+  message(FATAL_ERROR \"Failed to get the hash for HEAD\")
+endif()
+
+execute_process(
+  COMMAND \"${git_EXECUTABLE}\" show-ref ${git_tag}
+  WORKING_DIRECTORY \"${work_dir}\"
+  OUTPUT_VARIABLE show_ref_output
+  )
+# If a remote ref is asked for, which can possibly move around,
+# we must always do a fetch and checkout.
+if(\"\${show_ref_output}\" MATCHES \"remotes\")
+  set(is_remote_ref 1)
+else()
+  set(is_remote_ref 0)
+endif()
+
+# Tag is in the form <remote>/<tag> (i.e. origin/master) we must strip
+# the remote from the tag.
+if(\"\${show_ref_output}\" MATCHES \"refs/remotes/${git_tag}\")
+  string(REGEX MATCH \"^([^/]+)/(.+)$\" _unused \"${git_tag}\")
+  set(git_remote \"\${CMAKE_MATCH_1}\")
+  set(git_tag \"\${CMAKE_MATCH_2}\")
+else()
+  set(git_remote \"${git_remote_name}\")
+  set(git_tag \"${git_tag}\")
+endif()
+
+# This will fail if the tag does not exist (it probably has not been fetched
+# yet).
+execute_process(
+  COMMAND \"${git_EXECUTABLE}\" rev-list --max-count=1 ${git_tag}
+  WORKING_DIRECTORY \"${work_dir}\"
+  RESULT_VARIABLE error_code
+  OUTPUT_VARIABLE tag_sha
+  OUTPUT_STRIP_TRAILING_WHITESPACE
+  )
+
+# Is the hash checkout out that we want?
+if(error_code OR is_remote_ref OR NOT (\"\${tag_sha}\" STREQUAL \"\${head_sha}\"))
+  execute_process(
+    COMMAND \"${git_EXECUTABLE}\" fetch
+    WORKING_DIRECTORY \"${work_dir}\"
+    RESULT_VARIABLE error_code
+    )
+  if(error_code)
+    message(FATAL_ERROR \"Failed to fetch repository '${git_repository}'\")
+  endif()
+
+  if(is_remote_ref)
+    # Check if stash is needed
+    execute_process(
+      COMMAND \"${git_EXECUTABLE}\" status --porcelain
+      WORKING_DIRECTORY \"${work_dir}\"
+      RESULT_VARIABLE error_code
+      OUTPUT_VARIABLE repo_status
+      )
+    if(error_code)
+      message(FATAL_ERROR \"Failed to get the status\")
+    endif()
+    string(LENGTH \"\${repo_status}\" need_stash)
+
+    # If not in clean state, stash changes in order to be able to be able to
+    # perform git pull --rebase
+    if(need_stash)
+      execute_process(
+        COMMAND \"${git_EXECUTABLE}\" stash save ${git_stash_save_options}
+        WORKING_DIRECTORY \"${work_dir}\"
+        RESULT_VARIABLE error_code
+        )
+      if(error_code)
+        message(FATAL_ERROR \"Failed to stash changes\")
+      endif()
+    endif()
+
+    # Pull changes from the remote branch
+    execute_process(
+      COMMAND \"${git_EXECUTABLE}\" rebase \${git_remote}/\${git_tag}
+      WORKING_DIRECTORY \"${work_dir}\"
+      RESULT_VARIABLE error_code
+      )
+    if(error_code)
+      # Rebase failed: Restore previous state.
+      execute_process(
+        COMMAND \"${git_EXECUTABLE}\" rebase --abort
+        WORKING_DIRECTORY \"${work_dir}\"
+      )
+      if(need_stash)
+        execute_process(
+          COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
+          WORKING_DIRECTORY \"${work_dir}\"
+          )
+      endif()
+      message(FATAL_ERROR \"\\nFailed to rebase in: '${work_dir}/${src_name}'.\\nYou will have to resolve the conflicts manually\")
+    endif()
+
+    if(need_stash)
+      execute_process(
+        COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
+        WORKING_DIRECTORY \"${work_dir}\"
+        RESULT_VARIABLE error_code
+        )
+      if(error_code)
+        # Stash pop --index failed: Try again dropping the index
+        execute_process(
+          COMMAND \"${git_EXECUTABLE}\" reset --hard --quiet
+          WORKING_DIRECTORY \"${work_dir}\"
+          RESULT_VARIABLE error_code
+          )
+        execute_process(
+          COMMAND \"${git_EXECUTABLE}\" stash pop --quiet
+          WORKING_DIRECTORY \"${work_dir}\"
+          RESULT_VARIABLE error_code
+          )
+        if(error_code)
+          # Stash pop failed: Restore previous state.
+          execute_process(
+            COMMAND \"${git_EXECUTABLE}\" reset --hard --quiet \${head_sha}
+            WORKING_DIRECTORY \"${work_dir}\"
+          )
+          execute_process(
+            COMMAND \"${git_EXECUTABLE}\" stash pop --index --quiet
+            WORKING_DIRECTORY \"${work_dir}\"
+          )
+          message(FATAL_ERROR \"\\nFailed to unstash changes in: '${work_dir}/${src_name}'.\\nYou will have to resolve the conflicts manually\")
+        endif()
+      endif()
+    endif()
+  else()
+    execute_process(
+      COMMAND \"${git_EXECUTABLE}\" checkout ${git_tag}
+      WORKING_DIRECTORY \"${work_dir}\"
+      RESULT_VARIABLE error_code
+      )
+    if(error_code)
+      message(FATAL_ERROR \"Failed to checkout tag: '${git_tag}'\")
+    endif()
+  endif()
+
+  execute_process(
+    COMMAND \"${git_EXECUTABLE}\" submodule update --recursive --init ${git_submodules}
+    WORKING_DIRECTORY \"${work_dir}/${src_name}\"
+    RESULT_VARIABLE error_code
+    )
+  if(error_code)
+    message(FATAL_ERROR \"Failed to update submodules in: '${work_dir}/${src_name}'\")
+  endif()
+endif()
+
+"
+)
+
+endfunction(_ep_write_gitupdate_script)
+
+function(_ep_write_downloadfile_script script_filename REMOTE LOCAL timeout no_progress hash tls_verify tls_cainfo)
+  if(timeout)
+    set(TIMEOUT_ARGS TIMEOUT ${timeout})
+    set(TIMEOUT_MSG "${timeout} seconds")
+  else()
+    set(TIMEOUT_ARGS "# no TIMEOUT")
+    set(TIMEOUT_MSG "none")
+  endif()
+
+  if(no_progress)
+    set(SHOW_PROGRESS "")
+  else()
+    set(SHOW_PROGRESS "SHOW_PROGRESS")
+  endif()
+
+  if("${hash}" MATCHES "${_ep_hash_regex}")
+    set(ALGO "${CMAKE_MATCH_1}")
+    set(EXPECT_VALUE "${CMAKE_MATCH_2}")
+  else()
+    set(ALGO "")
+    set(EXPECT_VALUE "")
+  endif()
+
+  set(TLS_VERIFY_CODE "")
+  set(TLS_CAINFO_CODE "")
+
+  # check for curl globals in the project
+  if(DEFINED CMAKE_TLS_VERIFY)
+    set(TLS_VERIFY_CODE "set(CMAKE_TLS_VERIFY ${CMAKE_TLS_VERIFY})")
+  endif()
+  if(DEFINED CMAKE_TLS_CAINFO)
+    set(TLS_CAINFO_CODE "set(CMAKE_TLS_CAINFO \"${CMAKE_TLS_CAINFO}\")")
+  endif()
+
+  # now check for curl locals so that the local values
+  # will override the globals
+
+  # check for tls_verify argument
+  string(LENGTH "${tls_verify}" tls_verify_len)
+  if(tls_verify_len GREATER 0)
+    set(TLS_VERIFY_CODE "set(CMAKE_TLS_VERIFY ${tls_verify})")
+  endif()
+  # check for tls_cainfo argument
+  string(LENGTH "${tls_cainfo}" tls_cainfo_len)
+  if(tls_cainfo_len GREATER 0)
+    set(TLS_CAINFO_CODE "set(CMAKE_TLS_CAINFO \"${tls_cainfo}\")")
+  endif()
+
+  # Used variables:
+  # * TLS_VERIFY_CODE
+  # * TLS_CAINFO_CODE
+  # * ALGO
+  # * EXPECT_VALUE
+  # * REMOTE
+  # * LOCAL
+  # * SHOW_PROGRESS
+  # * TIMEOUT_ARGS
+  # * TIMEOUT_MSG
+  configure_file(
+      "${_ExternalProject_SELF_DIR}/ExternalProject-download.cmake.in"
+      "${script_filename}"
+      @ONLY
+  )
+endfunction()
+
+function(_ep_write_verifyfile_script script_filename LOCAL hash)
+  if("${hash}" MATCHES "${_ep_hash_regex}")
+    set(ALGO "${CMAKE_MATCH_1}")
+    string(TOLOWER "${CMAKE_MATCH_2}" EXPECT_VALUE)
+  else()
+    set(ALGO "")
+    set(EXPECT_VALUE "")
+  endif()
+
+  # Used variables:
+  # * ALGO
+  # * EXPECT_VALUE
+  # * LOCAL
+  configure_file(
+      "${_ExternalProject_SELF_DIR}/ExternalProject-verify.cmake.in"
+      "${script_filename}"
+      @ONLY
+  )
+endfunction()
+
+
+function(_ep_write_extractfile_script script_filename name filename directory)
+  set(args "")
+
+  if(filename MATCHES "(\\.|=)(7z|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
+    set(args xfz)
+  endif()
+
+  if(filename MATCHES "(\\.|=)tar$")
+    set(args xf)
+  endif()
+
+  if(args STREQUAL "")
+    message(SEND_ERROR "error: do not know how to extract '${filename}' -- known types are .7z, .tar, .tar.bz2, .tar.gz, .tar.xz, .tbz2, .tgz, .txz and .zip")
+    return()
+  endif()
+
+  file(WRITE ${script_filename}
+"# Make file names absolute:
+#
+get_filename_component(filename \"${filename}\" ABSOLUTE)
+get_filename_component(directory \"${directory}\" ABSOLUTE)
+
+message(STATUS \"extracting...
+     src='\${filename}'
+     dst='\${directory}'\")
+
+if(NOT EXISTS \"\${filename}\")
+  message(FATAL_ERROR \"error: file to extract does not exist: '\${filename}'\")
+endif()
+
+# Prepare a space for extracting:
+#
+set(i 1234)
+while(EXISTS \"\${directory}/../ex-${name}\${i}\")
+  math(EXPR i \"\${i} + 1\")
+endwhile()
+set(ut_dir \"\${directory}/../ex-${name}\${i}\")
+file(MAKE_DIRECTORY \"\${ut_dir}\")
+
+# Extract it:
+#
+message(STATUS \"extracting... [tar ${args}]\")
+execute_process(COMMAND \${CMAKE_COMMAND} -E tar ${args} \${filename}
+  WORKING_DIRECTORY \${ut_dir}
+  RESULT_VARIABLE rv)
+
+if(NOT rv EQUAL 0)
+  message(STATUS \"extracting... [error clean up]\")
+  file(REMOVE_RECURSE \"\${ut_dir}\")
+  message(FATAL_ERROR \"error: extract of '\${filename}' failed\")
+endif()
+
+# Analyze what came out of the tar file:
+#
+message(STATUS \"extracting... [analysis]\")
+file(GLOB contents \"\${ut_dir}/*\")
+list(LENGTH contents n)
+if(NOT n EQUAL 1 OR NOT IS_DIRECTORY \"\${contents}\")
+  set(contents \"\${ut_dir}\")
+endif()
+
+# Move \"the one\" directory to the final directory:
+#
+message(STATUS \"extracting... [rename]\")
+file(REMOVE_RECURSE \${directory})
+get_filename_component(contents \${contents} ABSOLUTE)
+file(RENAME \${contents} \${directory})
+
+# Clean up:
+#
+message(STATUS \"extracting... [clean up]\")
+file(REMOVE_RECURSE \"\${ut_dir}\")
+
+message(STATUS \"extracting... done\")
+"
+)
+
+endfunction()
+
+
+function(_ep_set_directories name)
+  get_property(prefix TARGET ${name} PROPERTY _EP_PREFIX)
+  if(NOT prefix)
+    get_property(prefix DIRECTORY PROPERTY EP_PREFIX)
+    if(NOT prefix)
+      get_property(base DIRECTORY PROPERTY EP_BASE)
+      if(NOT base)
+        set(prefix "${name}-prefix")
+      endif()
+    endif()
+  endif()
+  if(prefix)
+    set(tmp_default "${prefix}/tmp")
+    set(download_default "${prefix}/src")
+    set(source_default "${prefix}/src/${name}")
+    set(binary_default "${prefix}/src/${name}-build")
+    set(stamp_default "${prefix}/src/${name}-stamp")
+    set(install_default "${prefix}")
+  else()
+    set(tmp_default "${base}/tmp/${name}")
+    set(download_default "${base}/Download/${name}")
+    set(source_default "${base}/Source/${name}")
+    set(binary_default "${base}/Build/${name}")
+    set(stamp_default "${base}/Stamp/${name}")
+    set(install_default "${base}/Install/${name}")
+  endif()
+  get_property(build_in_source TARGET ${name} PROPERTY _EP_BUILD_IN_SOURCE)
+  if(build_in_source)
+    get_property(have_binary_dir TARGET ${name} PROPERTY _EP_BINARY_DIR SET)
+    if(have_binary_dir)
+      message(FATAL_ERROR
+        "External project ${name} has both BINARY_DIR and BUILD_IN_SOURCE!")
+    endif()
+  endif()
+  set(top "${CMAKE_CURRENT_BINARY_DIR}")
+  set(places stamp download source binary install tmp)
+  foreach(var ${places})
+    string(TOUPPER "${var}" VAR)
+    get_property(${var}_dir TARGET ${name} PROPERTY _EP_${VAR}_DIR)
+    if(NOT ${var}_dir)
+      set(${var}_dir "${${var}_default}")
+    endif()
+    if(NOT IS_ABSOLUTE "${${var}_dir}")
+      get_filename_component(${var}_dir "${top}/${${var}_dir}" ABSOLUTE)
+    endif()
+    set_property(TARGET ${name} PROPERTY _EP_${VAR}_DIR "${${var}_dir}")
+  endforeach()
+  if(build_in_source)
+    get_property(source_dir TARGET ${name} PROPERTY _EP_SOURCE_DIR)
+    set_property(TARGET ${name} PROPERTY _EP_BINARY_DIR "${source_dir}")
+  endif()
+
+  # Make the directories at CMake configure time *and* add a custom command
+  # to make them at build time. They need to exist at makefile generation
+  # time for Borland make and wmake so that CMake may generate makefiles
+  # with "cd C:\short\paths\with\no\spaces" commands in them.
+  #
+  # Additionally, the add_custom_command is still used in case somebody
+  # removes one of the necessary directories and tries to rebuild without
+  # re-running cmake.
+  foreach(var ${places})
+    string(TOUPPER "${var}" VAR)
+    get_property(dir TARGET ${name} PROPERTY _EP_${VAR}_DIR)
+    file(MAKE_DIRECTORY "${dir}")
+    if(NOT EXISTS "${dir}")
+      message(FATAL_ERROR "dir '${dir}' does not exist after file(MAKE_DIRECTORY)")
+    endif()
+  endforeach()
+endfunction()
+
+
+# IMPORTANT: this MUST be a macro and not a function because of the
+# in-place replacements that occur in each ${var}
+#
+macro(_ep_replace_location_tags target_name)
+  set(vars ${ARGN})
+  foreach(var ${vars})
+    if(${var})
+      foreach(dir SOURCE_DIR BINARY_DIR INSTALL_DIR TMP_DIR DOWNLOADED_FILE)
+        get_property(val TARGET ${target_name} PROPERTY _EP_${dir})
+        string(REPLACE "<${dir}>" "${val}" ${var} "${${var}}")
+      endforeach()
+    endif()
+  endforeach()
+endmacro()
+
+
+function(_ep_command_line_to_initial_cache var args force)
+  set(script_initial_cache "")
+  set(regex "^([^:]+):([^=]+)=(.*)$")
+  set(setArg "")
+  set(forceArg "")
+  if(force)
+    set(forceArg "FORCE")
+  endif()
+  foreach(line ${args})
+    if("${line}" MATCHES "^-D(.*)")
+      set(line "${CMAKE_MATCH_1}")
+      if(setArg)
+        # This is required to build up lists in variables, or complete an entry
+        set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})")
+        set(script_initial_cache "${script_initial_cache}\n${setArg}")
+        set(accumulator "")
+        set(setArg "")
+      endif()
+      if("${line}" MATCHES "${regex}")
+        set(name "${CMAKE_MATCH_1}")
+        set(type "${CMAKE_MATCH_2}")
+        set(value "${CMAKE_MATCH_3}")
+        set(setArg "set(${name} \"${value}")
+      else()
+        message(WARNING "Line '${line}' does not match regex. Ignoring.")
+      endif()
+    else()
+      # Assume this is a list to append to the last var
+      set(accumulator "${accumulator};${line}")
+    endif()
+  endforeach()
+  # Catch the final line of the args
+  if(setArg)
+    set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})")
+    set(script_initial_cache "${script_initial_cache}\n${setArg}")
+  endif()
+  set(${var} ${script_initial_cache} PARENT_SCOPE)
+endfunction()
+
+
+function(_ep_write_initial_cache target_name script_filename script_initial_cache)
+  # Write out values into an initial cache, that will be passed to CMake with -C
+  # Replace location tags.
+  _ep_replace_location_tags(${target_name} script_initial_cache)
+  # Write out the initial cache file to the location specified.
+  file(GENERATE OUTPUT "${script_filename}" CONTENT "${script_initial_cache}")
+endfunction()
+
+
+function(ExternalProject_Get_Property name)
+  foreach(var ${ARGN})
+    string(TOUPPER "${var}" VAR)
+    get_property(${var} TARGET ${name} PROPERTY _EP_${VAR})
+    if(NOT ${var})
+      message(FATAL_ERROR "External project \"${name}\" has no ${var}")
+    endif()
+    set(${var} "${${var}}" PARENT_SCOPE)
+  endforeach()
+endfunction()
+
+
+function(_ep_get_configure_command_id name cfg_cmd_id_var)
+  get_target_property(cmd ${name} _EP_CONFIGURE_COMMAND)
+
+  if(cmd STREQUAL "")
+    # Explicit empty string means no configure step for this project
+    set(${cfg_cmd_id_var} "none" PARENT_SCOPE)
+  else()
+    if(NOT cmd)
+      # Default is "use cmake":
+      set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
+    else()
+      # Otherwise we have to analyze the value:
+      if(cmd MATCHES "^[^;]*/configure")
+        set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
+      elseif(cmd MATCHES "^[^;]*/cmake" AND NOT cmd MATCHES ";-[PE];")
+        set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
+      elseif(cmd MATCHES "config")
+        set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
+      else()
+        set(${cfg_cmd_id_var} "unknown:${cmd}" PARENT_SCOPE)
+      endif()
+    endif()
+  endif()
+endfunction()
+
+
+function(_ep_get_build_command name step cmd_var)
+  set(cmd "${${cmd_var}}")
+  if(NOT cmd)
+    set(args)
+    _ep_get_configure_command_id(${name} cfg_cmd_id)
+    if(cfg_cmd_id STREQUAL "cmake")
+      # CMake project.  Select build command based on generator.
+      get_target_property(cmake_generator ${name} _EP_CMAKE_GENERATOR)
+      if("${CMAKE_GENERATOR}" MATCHES "Make" AND
+         ("${cmake_generator}" MATCHES "Make" OR NOT cmake_generator))
+        # The project uses the same Makefile generator.  Use recursive make.
+        set(cmd "$(MAKE)")
+        if(step STREQUAL "INSTALL")
+          set(args install)
+        endif()
+        if("x${step}x" STREQUAL "xTESTx")
+          set(args test)
+        endif()
+      else()
+        # Drive the project with "cmake --build".
+        get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
+        if(cmake_command)
+          set(cmd "${cmake_command}")
+        else()
+          set(cmd "${CMAKE_COMMAND}")
+        endif()
+        set(args --build ".")
+        if(CMAKE_CONFIGURATION_TYPES)
+          if (CMAKE_CFG_INTDIR AND
+              NOT CMAKE_CFG_INTDIR STREQUAL "." AND
+              NOT CMAKE_CFG_INTDIR MATCHES "\\$")
+            # CMake 3.4 and below used the CMAKE_CFG_INTDIR placeholder value
+            # provided by multi-configuration generators.  Some projects were
+            # taking advantage of that undocumented implementation detail to
+            # specify a specific configuration here.  They should use
+            # BUILD_COMMAND to change the default command instead, but for
+            # compatibility honor the value.
+            set(config ${CMAKE_CFG_INTDIR})
+            message(AUTHOR_WARNING "CMAKE_CFG_INTDIR should not be set by project code.\n"
+              "To get a non-default build command, use the BUILD_COMMAND option.")
+          else()
+            set(config $<CONFIG>)
+          endif()
+          list(APPEND args --config ${config})
+        endif()
+        if(step STREQUAL "INSTALL")
+          list(APPEND args --target install)
+        endif()
+        # But for "TEST" drive the project with corresponding "ctest".
+        if("x${step}x" STREQUAL "xTESTx")
+          string(REGEX REPLACE "^(.*/)cmake([^/]*)$" "\\1ctest\\2" cmd "${cmd}")
+          set(args "")
+          if(CMAKE_CONFIGURATION_TYPES)
+            list(APPEND args -C ${config})
+          endif()
+        endif()
+      endif()
+    else()
+      # Non-CMake project.  Guess "make" and "make install" and "make test".
+      if("${CMAKE_GENERATOR}" MATCHES "Makefiles")
+        # Try to get the parallel arguments
+        set(cmd "$(MAKE)")
+      else()
+        set(cmd "make")
+      endif()
+      if(step STREQUAL "INSTALL")
+        set(args install)
+      endif()
+      if("x${step}x" STREQUAL "xTESTx")
+        set(args test)
+      endif()
+    endif()
+
+    # Use user-specified arguments instead of default arguments, if any.
+    get_property(have_args TARGET ${name} PROPERTY _EP_${step}_ARGS SET)
+    if(have_args)
+      get_target_property(args ${name} _EP_${step}_ARGS)
+    endif()
+
+    list(APPEND cmd ${args})
+  endif()
+
+  set(${cmd_var} "${cmd}" PARENT_SCOPE)
+endfunction()
+
+function(_ep_write_log_script name step cmd_var)
+  ExternalProject_Get_Property(${name} stamp_dir)
+  set(command "${${cmd_var}}")
+
+  set(make "")
+  set(code_cygpath_make "")
+  if(command MATCHES "^\\$\\(MAKE\\)")
+    # GNU make recognizes the string "$(MAKE)" as recursive make, so
+    # ensure that it appears directly in the makefile.
+    string(REGEX REPLACE "^\\$\\(MAKE\\)" "\${make}" command "${command}")
+    set(make "-Dmake=$(MAKE)")
+
+    if(WIN32 AND NOT CYGWIN)
+      set(code_cygpath_make "
+if(\${make} MATCHES \"^/\")
+  execute_process(
+    COMMAND cygpath -w \${make}
+    OUTPUT_VARIABLE cygpath_make
+    ERROR_VARIABLE cygpath_make
+    RESULT_VARIABLE cygpath_error
+    OUTPUT_STRIP_TRAILING_WHITESPACE
+  )
+  if(NOT cygpath_error)
+    set(make \${cygpath_make})
+  endif()
+endif()
+")
+    endif()
+  endif()
+
+  set(config "")
+  if("${CMAKE_CFG_INTDIR}" MATCHES "^\\$")
+    string(REPLACE "${CMAKE_CFG_INTDIR}" "\${config}" command "${command}")
+    set(config "-Dconfig=${CMAKE_CFG_INTDIR}")
+  endif()
+
+  # Wrap multiple 'COMMAND' lines up into a second-level wrapper
+  # script so all output can be sent to one log file.
+  if(command MATCHES "(^|;)COMMAND;")
+    set(code_execute_process "
+${code_cygpath_make}
+execute_process(COMMAND \${command} RESULT_VARIABLE result)
+if(result)
+  set(msg \"Command failed (\${result}):\\n\")
+  foreach(arg IN LISTS command)
+    set(msg \"\${msg} '\${arg}'\")
+  endforeach()
+  message(FATAL_ERROR \"\${msg}\")
+endif()
+")
+    set(code "")
+    set(cmd "")
+    set(sep "")
+    foreach(arg IN LISTS command)
+      if("x${arg}" STREQUAL "xCOMMAND")
+        if(NOT "x${cmd}" STREQUAL "x")
+          set(code "${code}set(command \"${cmd}\")${code_execute_process}")
+        endif()
+        set(cmd "")
+        set(sep "")
+      else()
+        set(cmd "${cmd}${sep}${arg}")
+        set(sep ";")
+      endif()
+    endforeach()
+    set(code "${code}set(command \"${cmd}\")${code_execute_process}")
+    file(GENERATE OUTPUT "${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake" CONTENT "${code}")
+    set(command ${CMAKE_COMMAND} "-Dmake=\${make}" "-Dconfig=\${config}" -P ${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake)
+  endif()
+
+  # Wrap the command in a script to log output to files.
+  set(script ${stamp_dir}/${name}-${step}-$<CONFIG>.cmake)
+  set(logbase ${stamp_dir}/${name}-${step})
+  set(code "
+${code_cygpath_make}
+set(command \"${command}\")
+execute_process(
+  COMMAND \${command}
+  RESULT_VARIABLE result
+  OUTPUT_FILE \"${logbase}-out.log\"
+  ERROR_FILE \"${logbase}-err.log\"
+  )
+if(result)
+  set(msg \"Command failed: \${result}\\n\")
+  foreach(arg IN LISTS command)
+    set(msg \"\${msg} '\${arg}'\")
+  endforeach()
+  set(msg \"\${msg}\\nSee also\\n  ${logbase}-*.log\")
+  message(FATAL_ERROR \"\${msg}\")
+else()
+  set(msg \"${name} ${step} command succeeded.  See also ${logbase}-*.log\")
+  message(STATUS \"\${msg}\")
+endif()
+")
+  file(GENERATE OUTPUT "${script}" CONTENT "${code}")
+  set(command ${CMAKE_COMMAND} ${make} ${config} -P ${script})
+  set(${cmd_var} "${command}" PARENT_SCOPE)
+endfunction()
+
+# This module used to use "/${CMAKE_CFG_INTDIR}" directly and produced
+# makefiles with "/./" in paths for custom command dependencies. Which
+# resulted in problems with parallel make -j invocations.
+#
+# This function was added so that the suffix (search below for ${cfgdir}) is
+# only set to "/${CMAKE_CFG_INTDIR}" when ${CMAKE_CFG_INTDIR} is not going to
+# be "." (multi-configuration build systems like Visual Studio and Xcode...)
+#
+function(_ep_get_configuration_subdir_suffix suffix_var)
+  set(suffix "")
+  if(CMAKE_CONFIGURATION_TYPES)
+    set(suffix "/${CMAKE_CFG_INTDIR}")
+  endif()
+  set(${suffix_var} "${suffix}" PARENT_SCOPE)
+endfunction()
+
+
+function(_ep_get_step_stampfile name step stampfile_var)
+  ExternalProject_Get_Property(${name} stamp_dir)
+
+  _ep_get_configuration_subdir_suffix(cfgdir)
+  set(stampfile "${stamp_dir}${cfgdir}/${name}-${step}")
+
+  set(${stampfile_var} "${stampfile}" PARENT_SCOPE)
+endfunction()
+
+
+function(ExternalProject_Add_StepTargets name)
+  set(steps ${ARGN})
+  if(ARGC GREATER 1 AND "${ARGV1}" STREQUAL "NO_DEPENDS")
+    set(no_deps 1)
+    list(REMOVE_AT steps 0)
+  endif()
+  foreach(step ${steps})
+    if(no_deps  AND  "${step}" MATCHES "^(configure|build|install|test)$")
+      message(AUTHOR_WARNING "Using NO_DEPENDS for \"${step}\" step  might break parallel builds")
+    endif()
+    _ep_get_step_stampfile(${name} ${step} stamp_file)
+    add_custom_target(${name}-${step}
+      DEPENDS ${stamp_file})
+    set_property(TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP 1)
+    set_property(TARGET ${name}-${step} PROPERTY LABELS ${name})
+    set_property(TARGET ${name}-${step} PROPERTY FOLDER "ExternalProjectTargets/${name}")
+
+    # Depend on other external projects (target-level).
+    if(NOT no_deps)
+      get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
+      foreach(arg IN LISTS deps)
+        add_dependencies(${name}-${step} ${arg})
+      endforeach()
+    endif()
+  endforeach()
+endfunction()
+
+
+function(ExternalProject_Add_Step name step)
+  set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
+  _ep_get_configuration_subdir_suffix(cfgdir)
+
+  set(complete_stamp_file "${cmf_dir}${cfgdir}/${name}-complete")
+  _ep_get_step_stampfile(${name} ${step} stamp_file)
+
+  _ep_parse_arguments(ExternalProject_Add_Step
+                      ${name} _EP_${step}_ "${ARGN}")
+
+  get_property(exclude_from_main TARGET ${name} PROPERTY _EP_${step}_EXCLUDE_FROM_MAIN)
+  if(NOT exclude_from_main)
+    add_custom_command(APPEND
+      OUTPUT ${complete_stamp_file}
+      DEPENDS ${stamp_file}
+      )
+  endif()
+
+  # Steps depending on this step.
+  get_property(dependers TARGET ${name} PROPERTY _EP_${step}_DEPENDERS)
+  foreach(depender IN LISTS dependers)
+    _ep_get_step_stampfile(${name} ${depender} depender_stamp_file)
+    add_custom_command(APPEND
+      OUTPUT ${depender_stamp_file}
+      DEPENDS ${stamp_file}
+      )
+  endforeach()
+
+  # Dependencies on files.
+  get_property(depends TARGET ${name} PROPERTY _EP_${step}_DEPENDS)
+
+  # Byproducts of the step.
+  get_property(byproducts TARGET ${name} PROPERTY _EP_${step}_BYPRODUCTS)
+
+  # Dependencies on steps.
+  get_property(dependees TARGET ${name} PROPERTY _EP_${step}_DEPENDEES)
+  foreach(dependee IN LISTS dependees)
+    _ep_get_step_stampfile(${name} ${dependee} dependee_stamp_file)
+    list(APPEND depends ${dependee_stamp_file})
+  endforeach()
+
+  # The command to run.
+  get_property(command TARGET ${name} PROPERTY _EP_${step}_COMMAND)
+  if(command)
+    set(comment "Performing ${step} step for '${name}'")
+  else()
+    set(comment "No ${step} step for '${name}'")
+  endif()
+  get_property(work_dir TARGET ${name} PROPERTY _EP_${step}_WORKING_DIRECTORY)
+
+  # Replace list separators.
+  get_property(sep TARGET ${name} PROPERTY _EP_LIST_SEPARATOR)
+  if(sep AND command)
+    string(REPLACE "${sep}" "\\;" command "${command}")
+  endif()
+
+  # Replace location tags.
+  _ep_replace_location_tags(${name} comment command work_dir byproducts)
+
+  # Custom comment?
+  get_property(comment_set TARGET ${name} PROPERTY _EP_${step}_COMMENT SET)
+  if(comment_set)
+    get_property(comment TARGET ${name} PROPERTY _EP_${step}_COMMENT)
+  endif()
+
+  # Uses terminal?
+  get_property(uses_terminal TARGET ${name} PROPERTY _EP_${step}_USES_TERMINAL)
+  if(uses_terminal)
+    set(uses_terminal USES_TERMINAL)
+  else()
+    set(uses_terminal "")
+  endif()
+
+  # Run every time?
+  get_property(always TARGET ${name} PROPERTY _EP_${step}_ALWAYS)
+  if(always)
+    set_property(SOURCE ${stamp_file} PROPERTY SYMBOLIC 1)
+    set(touch)
+    # Remove any existing stamp in case the option changed in an existing tree.
+    if(CMAKE_CONFIGURATION_TYPES)
+      foreach(cfg ${CMAKE_CONFIGURATION_TYPES})
+        string(REPLACE "/${CMAKE_CFG_INTDIR}" "/${cfg}" stamp_file_config "${stamp_file}")
+        file(REMOVE ${stamp_file_config})
+      endforeach()
+    else()
+      file(REMOVE ${stamp_file})
+    endif()
+  else()
+    set(touch ${CMAKE_COMMAND} -E touch ${stamp_file})
+  endif()
+
+  # Wrap with log script?
+  get_property(log TARGET ${name} PROPERTY _EP_${step}_LOG)
+  if(command AND log)
+    _ep_write_log_script(${name} ${step} command)
+  endif()
+
+  if("${command}" STREQUAL "")
+    # Some generators (i.e. Xcode) will not generate a file level target
+    # if no command is set, and therefore the dependencies on this
+    # target will be broken.
+    # The empty command is replaced by an echo command here in order to
+    # avoid this issue.
+    set(command ${CMAKE_COMMAND} -E echo_append)
+  endif()
+
+  add_custom_command(
+    OUTPUT ${stamp_file}
+    BYPRODUCTS ${byproducts}
+    COMMENT ${comment}
+    COMMAND ${command}
+    COMMAND ${touch}
+    DEPENDS ${depends}
+    WORKING_DIRECTORY ${work_dir}
+    VERBATIM
+    ${uses_terminal}
+    )
+  set_property(TARGET ${name} APPEND PROPERTY _EP_STEPS ${step})
+
+  # Add custom "step target"?
+  get_property(step_targets TARGET ${name} PROPERTY _EP_STEP_TARGETS)
+  if(NOT step_targets)
+    get_property(step_targets DIRECTORY PROPERTY EP_STEP_TARGETS)
+  endif()
+  foreach(st ${step_targets})
+    if("${st}" STREQUAL "${step}")
+      ExternalProject_Add_StepTargets(${name} ${step})
+      break()
+    endif()
+  endforeach()
+
+  get_property(independent_step_targets TARGET ${name} PROPERTY _EP_INDEPENDENT_STEP_TARGETS)
+  if(NOT independent_step_targets)
+    get_property(independent_step_targets DIRECTORY PROPERTY EP_INDEPENDENT_STEP_TARGETS)
+  endif()
+  foreach(st ${independent_step_targets})
+    if("${st}" STREQUAL "${step}")
+      ExternalProject_Add_StepTargets(${name} NO_DEPENDS ${step})
+      break()
+    endif()
+  endforeach()
+endfunction()
+
+
+function(ExternalProject_Add_StepDependencies name step)
+  set(dependencies ${ARGN})
+
+  # Sanity checks on "name" and "step".
+  if(NOT TARGET ${name})
+    message(FATAL_ERROR "Cannot find target \"${name}\". Perhaps it has not yet been created using ExternalProject_Add.")
+  endif()
+
+  get_property(type TARGET ${name} PROPERTY TYPE)
+  if(NOT type STREQUAL "UTILITY")
+    message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add.")
+  endif()
+
+  get_property(is_ep TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT)
+  if(NOT is_ep)
+    message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add.")
+  endif()
+
+  get_property(steps TARGET ${name} PROPERTY _EP_STEPS)
+  list(FIND steps ${step} is_step)
+  if(NOT is_step)
+    message(FATAL_ERROR "External project \"${name}\" does not have a step \"${step}\".")
+  endif()
+
+  if(TARGET ${name}-${step})
+    get_property(type TARGET ${name}-${step} PROPERTY TYPE)
+    if(NOT type STREQUAL "UTILITY")
+      message(FATAL_ERROR "Target \"${name}-${step}\" was not generated by ExternalProject_Add_StepTargets.")
+    endif()
+    get_property(is_ep_step TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP)
+    if(NOT is_ep_step)
+      message(FATAL_ERROR "Target \"${name}-${step}\" was not generated by ExternalProject_Add_StepTargets.")
+    endif()
+  endif()
+
+  # Always add file-level dependency, but add target-level dependency
+  # only if the target exists for that step.
+  _ep_get_step_stampfile(${name} ${step} stamp_file)
+  foreach(dep ${dependencies})
+    add_custom_command(APPEND
+      OUTPUT ${stamp_file}
+      DEPENDS ${dep})
+    if(TARGET ${name}-${step})
+      foreach(dep ${dependencies})
+        add_dependencies(${name}-${step} ${dep})
+      endforeach()
+    endif()
+  endforeach()
+
+endfunction()
+
+
+function(_ep_add_mkdir_command name)
+  ExternalProject_Get_Property(${name}
+    source_dir binary_dir install_dir stamp_dir download_dir tmp_dir)
+
+  _ep_get_configuration_subdir_suffix(cfgdir)
+
+  ExternalProject_Add_Step(${name} mkdir
+    COMMENT "Creating directories for '${name}'"
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${source_dir}
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${binary_dir}
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${install_dir}
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${tmp_dir}
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${stamp_dir}${cfgdir}
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${download_dir}
+    )
+endfunction()
+
+
+function(_ep_is_dir_empty dir empty_var)
+  file(GLOB gr "${dir}/*")
+  if("${gr}" STREQUAL "")
+    set(${empty_var} 1 PARENT_SCOPE)
+  else()
+    set(${empty_var} 0 PARENT_SCOPE)
+  endif()
+endfunction()
+
+
+function(_ep_add_download_command name)
+  ExternalProject_Get_Property(${name} source_dir stamp_dir download_dir tmp_dir)
+
+  get_property(cmd_set TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND SET)
+  get_property(cmd TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND)
+  get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
+  get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
+  get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
+  get_property(hg_repository  TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
+  get_property(url TARGET ${name} PROPERTY _EP_URL)
+  get_property(fname TARGET ${name} PROPERTY _EP_DOWNLOAD_NAME)
+
+  # TODO: Perhaps file:// should be copied to download dir before extraction.
+  string(REGEX REPLACE "^file://" "" url "${url}")
+
+  set(depends)
+  set(comment)
+  set(work_dir)
+
+  if(cmd_set)
+    set(work_dir ${download_dir})
+  elseif(cvs_repository)
+    find_package(CVS QUIET)
+    if(NOT CVS_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find cvs for checkout of ${name}")
+    endif()
+
+    get_target_property(cvs_module ${name} _EP_CVS_MODULE)
+    if(NOT cvs_module)
+      message(FATAL_ERROR "error: no CVS_MODULE")
+    endif()
+
+    get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
+
+    set(repository ${cvs_repository})
+    set(module ${cvs_module})
+    set(tag ${cvs_tag})
+    configure_file(
+      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
+      "${stamp_dir}/${name}-cvsinfo.txt"
+      @ONLY
+      )
+
+    get_filename_component(src_name "${source_dir}" NAME)
+    get_filename_component(work_dir "${source_dir}" PATH)
+    set(comment "Performing download step (CVS checkout) for '${name}'")
+    set(cmd ${CVS_EXECUTABLE} -d ${cvs_repository} -q co ${cvs_tag} -d ${src_name} ${cvs_module})
+    list(APPEND depends ${stamp_dir}/${name}-cvsinfo.txt)
+  elseif(svn_repository)
+    find_package(Subversion QUIET)
+    if(NOT Subversion_SVN_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find svn for checkout of ${name}")
+    endif()
+
+    get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
+    get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
+    get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
+    get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
+
+    set(repository "${svn_repository} user=${svn_username} password=${svn_password}")
+    set(module)
+    set(tag ${svn_revision})
+    configure_file(
+      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
+      "${stamp_dir}/${name}-svninfo.txt"
+      @ONLY
+      )
+
+    get_filename_component(src_name "${source_dir}" NAME)
+    get_filename_component(work_dir "${source_dir}" PATH)
+    set(comment "Performing download step (SVN checkout) for '${name}'")
+    set(svn_user_pw_args "")
+    if(DEFINED svn_username)
+      set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
+    endif()
+    if(DEFINED svn_password)
+      set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
+    endif()
+    if(svn_trust_cert)
+      set(svn_trust_cert_args --trust-server-cert)
+    endif()
+    set(cmd ${Subversion_SVN_EXECUTABLE} co ${svn_repository} ${svn_revision}
+      --non-interactive ${svn_trust_cert_args} ${svn_user_pw_args} ${src_name})
+    list(APPEND depends ${stamp_dir}/${name}-svninfo.txt)
+  elseif(git_repository)
+    unset(CMAKE_MODULE_PATH) # Use CMake builtin find module
+    find_package(Git QUIET)
+    if(NOT GIT_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find git for clone of ${name}")
+    endif()
+
+    # The git submodule update '--recursive' flag requires git >= v1.6.5
+    #
+    if(GIT_VERSION_STRING VERSION_LESS 1.6.5)
+      message(FATAL_ERROR "error: git version 1.6.5 or later required for 'git submodule update --recursive': GIT_VERSION_STRING='${GIT_VERSION_STRING}'")
+    endif()
+
+    get_property(git_tag TARGET ${name} PROPERTY _EP_GIT_TAG)
+    if(NOT git_tag)
+      set(git_tag "master")
+    endif()
+    get_property(git_submodules TARGET ${name} PROPERTY _EP_GIT_SUBMODULES)
+
+    get_property(git_remote_name TARGET ${name} PROPERTY _EP_GIT_REMOTE_NAME)
+    if(NOT git_remote_name)
+      set(git_remote_name "origin")
+    endif()
+
+    get_property(tls_verify TARGET ${name} PROPERTY _EP_TLS_VERIFY)
+    if("x${tls_verify}" STREQUAL "x" AND DEFINED CMAKE_TLS_VERIFY)
+      set(tls_verify "${CMAKE_TLS_VERIFY}")
+    endif()
+    get_property(git_shallow TARGET ${name} PROPERTY _EP_GIT_SHALLOW)
+
+    # For the download step, and the git clone operation, only the repository
+    # should be recorded in a configured RepositoryInfo file. If the repo
+    # changes, the clone script should be run again. But if only the tag
+    # changes, avoid running the clone script again. Let the 'always' running
+    # update step checkout the new tag.
+    #
+    set(repository ${git_repository})
+    set(module)
+    set(tag)
+    configure_file(
+      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
+      "${stamp_dir}/${name}-gitinfo.txt"
+      @ONLY
+      )
+
+    get_filename_component(src_name "${source_dir}" NAME)
+    get_filename_component(work_dir "${source_dir}" PATH)
+
+    # Since git clone doesn't succeed if the non-empty source_dir exists,
+    # create a cmake script to invoke as download command.
+    # The script will delete the source directory and then call git clone.
+    #
+    _ep_write_gitclone_script(${tmp_dir}/${name}-gitclone.cmake ${source_dir}
+      ${GIT_EXECUTABLE} ${git_repository} ${git_tag} ${git_remote_name} "${git_submodules}" "${git_shallow}" ${src_name} ${work_dir}
+      ${stamp_dir}/${name}-gitinfo.txt ${stamp_dir}/${name}-gitclone-lastrun.txt "${tls_verify}"
+      )
+    set(comment "Performing download step (git clone) for '${name}'")
+    set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-gitclone.cmake)
+    list(APPEND depends ${stamp_dir}/${name}-gitinfo.txt)
+  elseif(hg_repository)
+    find_package(Hg QUIET)
+    if(NOT HG_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find hg for clone of ${name}")
+    endif()
+
+    get_property(hg_tag TARGET ${name} PROPERTY _EP_HG_TAG)
+    if(NOT hg_tag)
+      set(hg_tag "tip")
+    endif()
+
+    # For the download step, and the hg clone operation, only the repository
+    # should be recorded in a configured RepositoryInfo file. If the repo
+    # changes, the clone script should be run again. But if only the tag
+    # changes, avoid running the clone script again. Let the 'always' running
+    # update step checkout the new tag.
+    #
+    set(repository ${hg_repository})
+    set(module)
+    set(tag)
+    configure_file(
+      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
+      "${stamp_dir}/${name}-hginfo.txt"
+      @ONLY
+      )
+
+    get_filename_component(src_name "${source_dir}" NAME)
+    get_filename_component(work_dir "${source_dir}" PATH)
+
+    # Since hg clone doesn't succeed if the non-empty source_dir exists,
+    # create a cmake script to invoke as download command.
+    # The script will delete the source directory and then call hg clone.
+    #
+    _ep_write_hgclone_script(${tmp_dir}/${name}-hgclone.cmake ${source_dir}
+      ${HG_EXECUTABLE} ${hg_repository} ${hg_tag} ${src_name} ${work_dir}
+      ${stamp_dir}/${name}-hginfo.txt ${stamp_dir}/${name}-hgclone-lastrun.txt
+      )
+    set(comment "Performing download step (hg clone) for '${name}'")
+    set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-hgclone.cmake)
+    list(APPEND depends ${stamp_dir}/${name}-hginfo.txt)
+  elseif(url)
+    get_filename_component(work_dir "${source_dir}" PATH)
+    get_property(hash TARGET ${name} PROPERTY _EP_URL_HASH)
+    if(hash AND NOT "${hash}" MATCHES "${_ep_hash_regex}")
+      message(FATAL_ERROR "URL_HASH is set to\n  ${hash}\n"
+        "but must be ALGO=value where ALGO is\n  ${_ep_hash_algos}\n"
+        "and value is a hex string.")
+    endif()
+    get_property(md5 TARGET ${name} PROPERTY _EP_URL_MD5)
+    if(md5 AND NOT "MD5=${md5}" MATCHES "${_ep_hash_regex}")
+      message(FATAL_ERROR "URL_MD5 is set to\n  ${md5}\nbut must be a hex string.")
+    endif()
+    if(md5 AND NOT hash)
+      set(hash "MD5=${md5}")
+    endif()
+    set(repository "external project URL")
+    set(module "${url}")
+    set(tag "${hash}")
+    configure_file(
+      "${CMAKE_ROOT}/Modules/RepositoryInfo.txt.in"
+      "${stamp_dir}/${name}-urlinfo.txt"
+      @ONLY
+      )
+    list(APPEND depends ${stamp_dir}/${name}-urlinfo.txt)
+    if(IS_DIRECTORY "${url}")
+      get_filename_component(abs_dir "${url}" ABSOLUTE)
+      set(comment "Performing download step (DIR copy) for '${name}'")
+      set(cmd   ${CMAKE_COMMAND} -E remove_directory ${source_dir}
+        COMMAND ${CMAKE_COMMAND} -E copy_directory ${abs_dir} ${source_dir})
+    else()
+      get_property(no_extract TARGET "${name}" PROPERTY _EP_DOWNLOAD_NO_EXTRACT SET)
+      if("${url}" MATCHES "^[a-z]+://")
+        # TODO: Should download and extraction be different steps?
+        if("x${fname}" STREQUAL "x")
+          string(REGEX MATCH "[^/\\?]*$" fname "${url}")
+        endif()
+        if(NOT "${fname}" MATCHES "(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
+          string(REGEX MATCH "([^/\\?]+(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip))/.*$" match_result "${url}")
+          set(fname "${CMAKE_MATCH_1}")
+        endif()
+        if (no_extract)
+          get_filename_component(fname "${url}" NAME)
+        elseif(NOT "${fname}" MATCHES "(\\.|=)(7z|tar|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
+          message(FATAL_ERROR "Could not extract tarball filename from url:\n  ${url}")
+        endif()
+        string(REPLACE ";" "-" fname "${fname}")
+        set(file ${download_dir}/${fname})
+        get_property(timeout TARGET ${name} PROPERTY _EP_TIMEOUT)
+        get_property(no_progress TARGET ${name} PROPERTY _EP_DOWNLOAD_NO_PROGRESS)
+        get_property(tls_verify TARGET ${name} PROPERTY _EP_TLS_VERIFY)
+        get_property(tls_cainfo TARGET ${name} PROPERTY _EP_TLS_CAINFO)
+        set(download_script "${stamp_dir}/download-${name}.cmake")
+        _ep_write_downloadfile_script("${download_script}" "${url}" "${file}" "${timeout}" "${no_progress}" "${hash}" "${tls_verify}" "${tls_cainfo}")
+        set(cmd ${CMAKE_COMMAND} -P "${download_script}"
+          COMMAND)
+        if (no_extract)
+          set(steps "download and verify")
+        else ()
+          set(steps "download, verify and extract")
+        endif ()
+        set(comment "Performing download step (${steps}) for '${name}'")
+        file(WRITE "${stamp_dir}/verify-${name}.cmake" "") # already verified by 'download_script'
+      else()
+        set(file "${url}")
+        if (no_extract)
+          set(steps "verify")
+        else ()
+          set(steps "verify and extract")
+        endif ()
+        set(comment "Performing download step (${steps}) for '${name}'")
+        _ep_write_verifyfile_script("${stamp_dir}/verify-${name}.cmake" "${file}" "${hash}")
+      endif()
+      list(APPEND cmd ${CMAKE_COMMAND} -P ${stamp_dir}/verify-${name}.cmake
+        COMMAND)
+      if (NOT no_extract)
+        _ep_write_extractfile_script("${stamp_dir}/extract-${name}.cmake" "${name}" "${file}" "${source_dir}")
+        list(APPEND cmd ${CMAKE_COMMAND} -P ${stamp_dir}/extract-${name}.cmake)
+      else ()
+        set_property(TARGET ${name} PROPERTY _EP_DOWNLOADED_FILE ${file})
+      endif ()
+    endif()
+  else()
+    _ep_is_dir_empty("${source_dir}" empty)
+    if(${empty})
+      message(SEND_ERROR
+        "No download info given for '${name}' and its source directory:\n"
+        " ${source_dir}\n"
+        "is not an existing non-empty directory.  Please specify one of:\n"
+        " * SOURCE_DIR with an existing non-empty directory\n"
+        " * URL\n"
+        " * GIT_REPOSITORY\n"
+        " * HG_REPOSITORY\n"
+        " * CVS_REPOSITORY and CVS_MODULE\n"
+        " * SVN_REVISION\n"
+        " * DOWNLOAD_COMMAND"
+        )
+    endif()
+  endif()
+
+  get_property(log TARGET ${name} PROPERTY _EP_LOG_DOWNLOAD)
+  if(log)
+    set(log LOG 1)
+  else()
+    set(log "")
+  endif()
+
+  get_property(uses_terminal TARGET ${name} PROPERTY
+    _EP_USES_TERMINAL_DOWNLOAD)
+  if(uses_terminal)
+    set(uses_terminal USES_TERMINAL 1)
+  else()
+    set(uses_terminal "")
+  endif()
+
+  ExternalProject_Add_Step(${name} download
+    COMMENT ${comment}
+    COMMAND ${cmd}
+    WORKING_DIRECTORY ${work_dir}
+    DEPENDS ${depends}
+    DEPENDEES mkdir
+    ${log}
+    ${uses_terminal}
+    )
+endfunction()
+
+
+function(_ep_add_update_command name)
+  ExternalProject_Get_Property(${name} source_dir tmp_dir)
+
+  get_property(cmd_set TARGET ${name} PROPERTY _EP_UPDATE_COMMAND SET)
+  get_property(cmd TARGET ${name} PROPERTY _EP_UPDATE_COMMAND)
+  get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
+  get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
+  get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
+  get_property(hg_repository  TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
+  get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET)
+  if(update_disconnected_set)
+    get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED)
+  else()
+    get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED)
+  endif()
+
+  set(work_dir)
+  set(comment)
+  set(always)
+
+  if(cmd_set)
+    set(work_dir ${source_dir})
+    if(NOT "x${cmd}" STREQUAL "x")
+      set(always 1)
+    endif()
+  elseif(cvs_repository)
+    if(NOT CVS_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find cvs for update of ${name}")
+    endif()
+    set(work_dir ${source_dir})
+    set(comment "Performing update step (CVS update) for '${name}'")
+    get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
+    set(cmd ${CVS_EXECUTABLE} -d ${cvs_repository} -q up -dP ${cvs_tag})
+    set(always 1)
+  elseif(svn_repository)
+    if(NOT Subversion_SVN_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find svn for update of ${name}")
+    endif()
+    set(work_dir ${source_dir})
+    set(comment "Performing update step (SVN update) for '${name}'")
+    get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
+    get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
+    get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
+    get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
+    set(svn_user_pw_args "")
+    if(DEFINED svn_username)
+      set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
+    endif()
+    if(DEFINED svn_password)
+      set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
+    endif()
+    if(svn_trust_cert)
+      set(svn_trust_cert_args --trust-server-cert)
+    endif()
+    set(cmd ${Subversion_SVN_EXECUTABLE} up ${svn_revision}
+      --non-interactive ${svn_trust_cert_args} ${svn_user_pw_args})
+    set(always 1)
+  elseif(git_repository)
+    unset(CMAKE_MODULE_PATH) # Use CMake builtin find module
+    find_package(Git QUIET)
+    if(NOT GIT_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find git for fetch of ${name}")
+    endif()
+    set(work_dir ${source_dir})
+    set(comment "Performing update step for '${name}'")
+    get_property(git_tag TARGET ${name} PROPERTY _EP_GIT_TAG)
+    if(NOT git_tag)
+      set(git_tag "master")
+    endif()
+    get_property(git_remote_name TARGET ${name} PROPERTY _EP_GIT_REMOTE_NAME)
+    if(NOT git_remote_name)
+      set(git_remote_name "origin")
+    endif()
+    get_property(git_submodules TARGET ${name} PROPERTY _EP_GIT_SUBMODULES)
+    _ep_write_gitupdate_script(${tmp_dir}/${name}-gitupdate.cmake
+      ${GIT_EXECUTABLE} ${git_tag} ${git_remote_name} "${git_submodules}" ${git_repository} ${work_dir}
+      )
+    set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-gitupdate.cmake)
+    set(always 1)
+  elseif(hg_repository)
+    if(NOT HG_EXECUTABLE)
+      message(FATAL_ERROR "error: could not find hg for pull of ${name}")
+    endif()
+    set(work_dir ${source_dir})
+    set(comment "Performing update step (hg pull) for '${name}'")
+    get_property(hg_tag TARGET ${name} PROPERTY _EP_HG_TAG)
+    if(NOT hg_tag)
+      set(hg_tag "tip")
+    endif()
+    if("${HG_VERSION_STRING}" STREQUAL "2.1")
+      message(WARNING "Mercurial 2.1 does not distinguish an empty pull from a failed pull:
+ http://mercurial.selenic.com/wiki/UpgradeNotes#A2.1.1:_revert_pull_return_code_change.2C_compile_issue_on_OS_X
+ http://thread.gmane.org/gmane.comp.version-control.mercurial.devel/47656
+Update to Mercurial >= 2.1.1.
+")
+    endif()
+    set(cmd ${HG_EXECUTABLE} pull
+      COMMAND ${HG_EXECUTABLE} update ${hg_tag}
+      )
+    set(always 1)
+  endif()
+
+  get_property(log TARGET ${name} PROPERTY _EP_LOG_UPDATE)
+  if(log)
+    set(log LOG 1)
+  else()
+    set(log "")
+  endif()
+
+  get_property(uses_terminal TARGET ${name} PROPERTY
+    _EP_USES_TERMINAL_UPDATE)
+  if(uses_terminal)
+    set(uses_terminal USES_TERMINAL 1)
+  else()
+    set(uses_terminal "")
+  endif()
+
+  ExternalProject_Add_Step(${name} update
+    COMMENT ${comment}
+    COMMAND ${cmd}
+    ALWAYS ${always}
+    EXCLUDE_FROM_MAIN ${update_disconnected}
+    WORKING_DIRECTORY ${work_dir}
+    DEPENDEES download
+    ${log}
+    ${uses_terminal}
+    )
+
+  if(always AND update_disconnected)
+    _ep_get_step_stampfile(${name} skip-update skip-update_stamp_file)
+    string(REPLACE "Performing" "Skipping" comment "${comment}")
+    ExternalProject_Add_Step(${name} skip-update
+      COMMENT ${comment}
+      ALWAYS 1
+      EXCLUDE_FROM_MAIN 1
+      WORKING_DIRECTORY ${work_dir}
+      DEPENDEES download
+      ${log}
+      ${uses_terminal}
+    )
+    set_property(SOURCE ${skip-update_stamp_file} PROPERTY SYMBOLIC 1)
+  endif()
+
+endfunction()
+
+
+function(_ep_add_patch_command name)
+  ExternalProject_Get_Property(${name} source_dir)
+
+  get_property(cmd_set TARGET ${name} PROPERTY _EP_PATCH_COMMAND SET)
+  get_property(cmd TARGET ${name} PROPERTY _EP_PATCH_COMMAND)
+
+  set(work_dir)
+
+  if(cmd_set)
+    set(work_dir ${source_dir})
+  endif()
+
+  ExternalProject_Add_Step(${name} patch
+    COMMAND ${cmd}
+    WORKING_DIRECTORY ${work_dir}
+    DEPENDEES download
+    )
+endfunction()
+
+
+# TODO: Make sure external projects use the proper compiler
+function(_ep_add_configure_command name)
+  ExternalProject_Get_Property(${name} source_dir binary_dir tmp_dir)
+
+  # Depend on other external projects (file-level).
+  set(file_deps)
+  get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
+  foreach(dep IN LISTS deps)
+    get_property(dep_type TARGET ${dep} PROPERTY TYPE)
+    if(dep_type STREQUAL "UTILITY")
+      get_property(is_ep TARGET ${dep} PROPERTY _EP_IS_EXTERNAL_PROJECT)
+      if(is_ep)
+        _ep_get_step_stampfile(${dep} "done" done_stamp_file)
+        list(APPEND file_deps ${done_stamp_file})
+      endif()
+    endif()
+  endforeach()
+
+  get_property(cmd_set TARGET ${name} PROPERTY _EP_CONFIGURE_COMMAND SET)
+  if(cmd_set)
+    get_property(cmd TARGET ${name} PROPERTY _EP_CONFIGURE_COMMAND)
+  else()
+    get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
+    if(cmake_command)
+      set(cmd "${cmake_command}")
+    else()
+      set(cmd "${CMAKE_COMMAND}")
+    endif()
+
+    get_property(cmake_args TARGET ${name} PROPERTY _EP_CMAKE_ARGS)
+    list(APPEND cmd ${cmake_args})
+
+    # If there are any CMAKE_CACHE_ARGS or CMAKE_CACHE_DEFAULT_ARGS,
+    # write an initial cache and use it
+    get_property(cmake_cache_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_ARGS)
+    get_property(cmake_cache_default_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_DEFAULT_ARGS)
+
+    if(cmake_cache_args OR cmake_cache_default_args)
+      set(_ep_cache_args_script "${tmp_dir}/${name}-cache-$<CONFIG>.cmake")
+      if(cmake_cache_args)
+        _ep_command_line_to_initial_cache(script_initial_cache_force "${cmake_cache_args}" 1)
+      endif()
+      if(cmake_cache_default_args)
+        _ep_command_line_to_initial_cache(script_initial_cache_default "${cmake_cache_default_args}" 0)
+      endif()
+      _ep_write_initial_cache(${name} "${_ep_cache_args_script}" "${script_initial_cache_force}${script_initial_cache_default}")
+      list(APPEND cmd "-C${_ep_cache_args_script}")
+    endif()
+
+    get_target_property(cmake_generator ${name} _EP_CMAKE_GENERATOR)
+    get_target_property(cmake_generator_platform ${name} _EP_CMAKE_GENERATOR_PLATFORM)
+    get_target_property(cmake_generator_toolset ${name} _EP_CMAKE_GENERATOR_TOOLSET)
+    if(cmake_generator)
+      list(APPEND cmd "-G${cmake_generator}")
+      if(cmake_generator_platform)
+        list(APPEND cmd "-A${cmake_generator_platform}")
+      endif()
+      if(cmake_generator_toolset)
+        list(APPEND cmd "-T${cmake_generator_toolset}")
+      endif()
+    else()
+      if(CMAKE_EXTRA_GENERATOR)
+        list(APPEND cmd "-G${CMAKE_EXTRA_GENERATOR} - ${CMAKE_GENERATOR}")
+      else()
+        list(APPEND cmd "-G${CMAKE_GENERATOR}")
+      endif()
+      if(cmake_generator_platform)
+        message(FATAL_ERROR "Option CMAKE_GENERATOR_PLATFORM not allowed without CMAKE_GENERATOR.")
+      endif()
+      if(CMAKE_GENERATOR_PLATFORM)
+        list(APPEND cmd "-A${CMAKE_GENERATOR_PLATFORM}")
+      endif()
+      if(cmake_generator_toolset)
+        message(FATAL_ERROR "Option CMAKE_GENERATOR_TOOLSET not allowed without CMAKE_GENERATOR.")
+      endif()
+      if(CMAKE_GENERATOR_TOOLSET)
+        list(APPEND cmd "-T${CMAKE_GENERATOR_TOOLSET}")
+      endif()
+    endif()
+
+    list(APPEND cmd "${source_dir}")
+  endif()
+
+  # If anything about the configure command changes, (command itself, cmake
+  # used, cmake args or cmake generator) then re-run the configure step.
+  # Fixes issue http://public.kitware.com/Bug/view.php?id=10258
+  #
+  if(NOT EXISTS ${tmp_dir}/${name}-cfgcmd.txt.in)
+    file(WRITE ${tmp_dir}/${name}-cfgcmd.txt.in "cmd='\@cmd\@'\n")
+  endif()
+  configure_file(${tmp_dir}/${name}-cfgcmd.txt.in ${tmp_dir}/${name}-cfgcmd.txt)
+  list(APPEND file_deps ${tmp_dir}/${name}-cfgcmd.txt)
+  list(APPEND file_deps ${_ep_cache_args_script})
+
+  get_property(log TARGET ${name} PROPERTY _EP_LOG_CONFIGURE)
+  if(log)
+    set(log LOG 1)
+  else()
+    set(log "")
+  endif()
+
+  get_property(uses_terminal TARGET ${name} PROPERTY
+    _EP_USES_TERMINAL_CONFIGURE)
+  if(uses_terminal)
+    set(uses_terminal USES_TERMINAL 1)
+  else()
+    set(uses_terminal "")
+  endif()
+
+  get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET)
+  if(update_disconnected_set)
+    get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED)
+  else()
+    get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED)
+  endif()
+  if(update_disconnected)
+    set(update_dep skip-update)
+  else()
+    set(update_dep update)
+  endif()
+
+  ExternalProject_Add_Step(${name} configure
+    COMMAND ${cmd}
+    WORKING_DIRECTORY ${binary_dir}
+    DEPENDEES ${update_dep} patch
+    DEPENDS ${file_deps}
+    ${log}
+    ${uses_terminal}
+    )
+endfunction()
+
+
+function(_ep_add_build_command name)
+  ExternalProject_Get_Property(${name} binary_dir)
+
+  get_property(cmd_set TARGET ${name} PROPERTY _EP_BUILD_COMMAND SET)
+  if(cmd_set)
+    get_property(cmd TARGET ${name} PROPERTY _EP_BUILD_COMMAND)
+  else()
+    _ep_get_build_command(${name} BUILD cmd)
+  endif()
+
+  get_property(log TARGET ${name} PROPERTY _EP_LOG_BUILD)
+  if(log)
+    set(log LOG 1)
+  else()
+    set(log "")
+  endif()
+
+  get_property(uses_terminal TARGET ${name} PROPERTY
+    _EP_USES_TERMINAL_BUILD)
+  if(uses_terminal)
+    set(uses_terminal USES_TERMINAL 1)
+  else()
+    set(uses_terminal "")
+  endif()
+
+  get_property(build_always TARGET ${name} PROPERTY _EP_BUILD_ALWAYS)
+  if(build_always)
+    set(always 1)
+  else()
+    set(always 0)
+  endif()
+
+  get_property(build_byproducts TARGET ${name} PROPERTY _EP_BUILD_BYPRODUCTS)
+
+  ExternalProject_Add_Step(${name} build
+    COMMAND ${cmd}
+    BYPRODUCTS ${build_byproducts}
+    WORKING_DIRECTORY ${binary_dir}
+    DEPENDEES configure
+    ALWAYS ${always}
+    ${log}
+    ${uses_terminal}
+    )
+endfunction()
+
+
+function(_ep_add_install_command name)
+  ExternalProject_Get_Property(${name} binary_dir)
+
+  get_property(cmd_set TARGET ${name} PROPERTY _EP_INSTALL_COMMAND SET)
+  if(cmd_set)
+    get_property(cmd TARGET ${name} PROPERTY _EP_INSTALL_COMMAND)
+  else()
+    _ep_get_build_command(${name} INSTALL cmd)
+  endif()
+
+  get_property(log TARGET ${name} PROPERTY _EP_LOG_INSTALL)
+  if(log)
+    set(log LOG 1)
+  else()
+    set(log "")
+  endif()
+
+  get_property(uses_terminal TARGET ${name} PROPERTY
+    _EP_USES_TERMINAL_INSTALL)
+  if(uses_terminal)
+    set(uses_terminal USES_TERMINAL 1)
+  else()
+    set(uses_terminal "")
+  endif()
+
+  ExternalProject_Add_Step(${name} install
+    COMMAND ${cmd}
+    WORKING_DIRECTORY ${binary_dir}
+    DEPENDEES build
+    ${log}
+    ${uses_terminal}
+    )
+endfunction()
+
+
+function(_ep_add_test_command name)
+  ExternalProject_Get_Property(${name} binary_dir)
+
+  get_property(before TARGET ${name} PROPERTY _EP_TEST_BEFORE_INSTALL)
+  get_property(after TARGET ${name} PROPERTY _EP_TEST_AFTER_INSTALL)
+  get_property(exclude TARGET ${name} PROPERTY _EP_TEST_EXCLUDE_FROM_MAIN)
+  get_property(cmd_set TARGET ${name} PROPERTY _EP_TEST_COMMAND SET)
+
+  # Only actually add the test step if one of the test related properties is
+  # explicitly set. (i.e. the test step is omitted unless requested...)
+  #
+  if(cmd_set OR before OR after OR exclude)
+    if(cmd_set)
+      get_property(cmd TARGET ${name} PROPERTY _EP_TEST_COMMAND)
+    else()
+      _ep_get_build_command(${name} TEST cmd)
+    endif()
+
+    if(before)
+      set(dependees_args DEPENDEES build)
+    else()
+      set(dependees_args DEPENDEES install)
+    endif()
+
+    if(exclude)
+      set(dependers_args "")
+      set(exclude_args EXCLUDE_FROM_MAIN 1)
+    else()
+      if(before)
+        set(dependers_args DEPENDERS install)
+      else()
+        set(dependers_args "")
+      endif()
+      set(exclude_args "")
+    endif()
+
+    get_property(log TARGET ${name} PROPERTY _EP_LOG_TEST)
+    if(log)
+      set(log LOG 1)
+    else()
+      set(log "")
+    endif()
+
+    get_property(uses_terminal TARGET ${name} PROPERTY
+      _EP_USES_TERMINAL_TEST)
+    if(uses_terminal)
+      set(uses_terminal USES_TERMINAL 1)
+    else()
+      set(uses_terminal "")
+    endif()
+
+    ExternalProject_Add_Step(${name} test
+      COMMAND ${cmd}
+      WORKING_DIRECTORY ${binary_dir}
+      ${dependees_args}
+      ${dependers_args}
+      ${exclude_args}
+      ${log}
+      ${uses_terminal}
+      )
+  endif()
+endfunction()
+
+
+function(ExternalProject_Add name)
+  _ep_get_configuration_subdir_suffix(cfgdir)
+
+  # Add a custom target for the external project.
+  set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
+  set(complete_stamp_file "${cmf_dir}${cfgdir}/${name}-complete")
+
+  # The "ALL" option to add_custom_target just tells it to not set the
+  # EXCLUDE_FROM_ALL target property. Later, if the EXCLUDE_FROM_ALL
+  # argument was passed, we explicitly set it for the target.
+  add_custom_target(${name} ALL DEPENDS ${complete_stamp_file})
+  set_property(TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT 1)
+  set_property(TARGET ${name} PROPERTY LABELS ${name})
+  set_property(TARGET ${name} PROPERTY FOLDER "ExternalProjectTargets/${name}")
+
+  _ep_parse_arguments(ExternalProject_Add ${name} _EP_ "${ARGN}")
+  _ep_set_directories(${name})
+  _ep_get_step_stampfile(${name} "done" done_stamp_file)
+  _ep_get_step_stampfile(${name} "install" install_stamp_file)
+
+  # Set the EXCLUDE_FROM_ALL target property if required.
+  get_property(exclude_from_all TARGET ${name} PROPERTY _EP_EXCLUDE_FROM_ALL)
+  if(exclude_from_all)
+    set_property(TARGET ${name} PROPERTY EXCLUDE_FROM_ALL TRUE)
+  endif()
+
+  # The 'complete' step depends on all other steps and creates a
+  # 'done' mark.  A dependent external project's 'configure' step
+  # depends on the 'done' mark so that it rebuilds when this project
+  # rebuilds.  It is important that 'done' is not the output of any
+  # custom command so that CMake does not propagate build rules to
+  # other external project targets, which may cause problems during
+  # parallel builds.  However, the Ninja generator needs to see the entire
+  # dependency graph, and can cope with custom commands belonging to
+  # multiple targets, so we add the 'done' mark as an output for Ninja only.
+  set(complete_outputs ${complete_stamp_file})
+  if(${CMAKE_GENERATOR} MATCHES "Ninja")
+    set(complete_outputs ${complete_outputs} ${done_stamp_file})
+  endif()
+
+  add_custom_command(
+    OUTPUT ${complete_outputs}
+    COMMENT "Completed '${name}'"
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${cmf_dir}${cfgdir}
+    COMMAND ${CMAKE_COMMAND} -E touch ${complete_stamp_file}
+    COMMAND ${CMAKE_COMMAND} -E touch ${done_stamp_file}
+    DEPENDS ${install_stamp_file}
+    VERBATIM
+    )
+
+
+  # Depend on other external projects (target-level).
+  get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
+  foreach(arg IN LISTS deps)
+    add_dependencies(${name} ${arg})
+  endforeach()
+
+  # Set up custom build steps based on the target properties.
+  # Each step depends on the previous one.
+  #
+  # The target depends on the output of the final step.
+  # (Already set up above in the DEPENDS of the add_custom_target command.)
+  #
+  _ep_add_mkdir_command(${name})
+  _ep_add_download_command(${name})
+  _ep_add_update_command(${name})
+  _ep_add_patch_command(${name})
+  _ep_add_configure_command(${name})
+  _ep_add_build_command(${name})
+  _ep_add_install_command(${name})
+
+  # Test is special in that it might depend on build, or it might depend
+  # on install.
+  #
+  _ep_add_test_command(${name})
+endfunction()
diff --git a/share/cmake-3.2/Modules/FLTKCompatibility.cmake b/share/cmake-3.6/Modules/FLTKCompatibility.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FLTKCompatibility.cmake
rename to share/cmake-3.6/Modules/FLTKCompatibility.cmake
diff --git a/share/cmake-3.6/Modules/FeatureSummary.cmake b/share/cmake-3.6/Modules/FeatureSummary.cmake
new file mode 100644
index 0000000..dc31086
--- /dev/null
+++ b/share/cmake-3.6/Modules/FeatureSummary.cmake
@@ -0,0 +1,598 @@
+#.rst:
+# FeatureSummary
+# --------------
+#
+# Macros for generating a summary of enabled/disabled features
+#
+#
+#
+# This module provides the macros feature_summary(),
+# set_package_properties() and add_feature_info().  For compatibility it
+# also still provides set_package_info(), set_feature_info(),
+# print_enabled_features() and print_disabled_features().
+#
+# These macros can be used to generate a summary of enabled and disabled
+# packages and/or feature for a build tree:
+#
+# ::
+#
+#     -- The following OPTIONAL packages have been found:
+#     LibXml2 (required version >= 2.4), XML processing lib, <http://xmlsoft.org>
+#        * Enables HTML-import in MyWordProcessor
+#        * Enables odt-export in MyWordProcessor
+#     PNG , A PNG image library. , <http://www.libpng.org/pub/png/>
+#        * Enables saving screenshots
+#     -- The following OPTIONAL packages have not been found:
+#     Lua51 , The Lua scripting language. , <http://www.lua.org>
+#        * Enables macros in MyWordProcessor
+#     Foo , Foo provides cool stuff.
+#
+#
+#
+#
+#
+# ::
+#
+#     FEATURE_SUMMARY( [FILENAME <file>]
+#                      [APPEND]
+#                      [VAR <variable_name>]
+#                      [INCLUDE_QUIET_PACKAGES]
+#                      [FATAL_ON_MISSING_REQUIRED_PACKAGES]
+#                      [DESCRIPTION "Found packages:"]
+#                      WHAT (ALL | PACKAGES_FOUND | PACKAGES_NOT_FOUND
+#                           | ENABLED_FEATURES | DISABLED_FEATURES)
+#                    )
+#
+#
+#
+# The FEATURE_SUMMARY() macro can be used to print information about
+# enabled or disabled packages or features of a project.  By default,
+# only the names of the features/packages will be printed and their
+# required version when one was specified.  Use SET_PACKAGE_PROPERTIES()
+# to add more useful information, like e.g.  a download URL for the
+# respective package or their purpose in the project.
+#
+# The WHAT option is the only mandatory option.  Here you specify what
+# information will be printed:
+#
+# ``ALL``
+#  print everything
+# ``ENABLED_FEATURES``
+#  the list of all features which are enabled
+# ``DISABLED_FEATURES``
+#  the list of all features which are disabled
+# ``PACKAGES_FOUND``
+#  the list of all packages which have been found
+# ``PACKAGES_NOT_FOUND``
+#  the list of all packages which have not been found
+# ``OPTIONAL_PACKAGES_FOUND``
+#  only those packages which have been found which have the type OPTIONAL
+# ``OPTIONAL_PACKAGES_NOT_FOUND``
+#  only those packages which have not been found which have the type OPTIONAL
+# ``RECOMMENDED_PACKAGES_FOUND``
+#  only those packages which have been found which have the type RECOMMENDED
+# ``RECOMMENDED_PACKAGES_NOT_FOUND``
+#  only those packages which have not been found which have the type RECOMMENDED
+# ``REQUIRED_PACKAGES_FOUND``
+#  only those packages which have been found which have the type REQUIRED
+# ``REQUIRED_PACKAGES_NOT_FOUND``
+#  only those packages which have not been found which have the type REQUIRED
+# ``RUNTIME_PACKAGES_FOUND``
+#  only those packages which have been found which have the type RUNTIME
+# ``RUNTIME_PACKAGES_NOT_FOUND``
+#  only those packages which have not been found which have the type RUNTIME
+#
+# With the exception of the ``ALL`` value, these values can be combined
+# in order to customize the output. For example:
+#
+# ::
+#
+#    feature_summary(WHAT ENABLED_FEATURES DISABLED_FEATURES)
+#
+#
+#
+# If a FILENAME is given, the information is printed into this file.  If
+# APPEND is used, it is appended to this file, otherwise the file is
+# overwritten if it already existed.  If the VAR option is used, the
+# information is "printed" into the specified variable.  If FILENAME is
+# not used, the information is printed to the terminal.  Using the
+# DESCRIPTION option a description or headline can be set which will be
+# printed above the actual content.  If INCLUDE_QUIET_PACKAGES is given,
+# packages which have been searched with find_package(...  QUIET) will
+# also be listed.  By default they are skipped.  If
+# FATAL_ON_MISSING_REQUIRED_PACKAGES is given, CMake will abort if a
+# package which is marked as REQUIRED has not been found.
+#
+# Example 1, append everything to a file:
+#
+# ::
+#
+#    feature_summary(WHAT ALL
+#                    FILENAME ${CMAKE_BINARY_DIR}/all.log APPEND)
+#
+#
+#
+# Example 2, print the enabled features into the variable
+# enabledFeaturesText, including QUIET packages:
+#
+# ::
+#
+#    feature_summary(WHAT ENABLED_FEATURES
+#                    INCLUDE_QUIET_PACKAGES
+#                    DESCRIPTION "Enabled Features:"
+#                    VAR enabledFeaturesText)
+#    message(STATUS "${enabledFeaturesText}")
+#
+#
+#
+#
+#
+# ::
+#
+#     SET_PACKAGE_PROPERTIES(<name> PROPERTIES
+#                            [ URL <url> ]
+#                            [ DESCRIPTION <description> ]
+#                            [ TYPE (RUNTIME|OPTIONAL|RECOMMENDED|REQUIRED) ]
+#                            [ PURPOSE <purpose> ]
+#                           )
+#
+#
+#
+# Use this macro to set up information about the named package, which
+# can then be displayed via FEATURE_SUMMARY().  This can be done either
+# directly in the Find-module or in the project which uses the module
+# after the find_package() call.  The features for which information can
+# be set are added automatically by the find_package() command.
+#
+# URL: this should be the homepage of the package, or something similar.
+# Ideally this is set already directly in the Find-module.
+#
+# DESCRIPTION: A short description what that package is, at most one
+# sentence.  Ideally this is set already directly in the Find-module.
+#
+# TYPE: What type of dependency has the using project on that package.
+# Default is OPTIONAL.  In this case it is a package which can be used
+# by the project when available at buildtime, but it also work without.
+# RECOMMENDED is similar to OPTIONAL, i.e.  the project will build if
+# the package is not present, but the functionality of the resulting
+# binaries will be severly limited.  If a REQUIRED package is not
+# available at buildtime, the project may not even build.  This can be
+# combined with the FATAL_ON_MISSING_REQUIRED_PACKAGES argument for
+# feature_summary().  Last, a RUNTIME package is a package which is
+# actually not used at all during the build, but which is required for
+# actually running the resulting binaries.  So if such a package is
+# missing, the project can still be built, but it may not work later on.
+# If set_package_properties() is called multiple times for the same
+# package with different TYPEs, the TYPE is only changed to higher TYPEs
+# ( RUNTIME < OPTIONAL < RECOMMENDED < REQUIRED ), lower TYPEs are
+# ignored.  The TYPE property is project-specific, so it cannot be set
+# by the Find-module, but must be set in the project.
+#
+# PURPOSE: This describes which features this package enables in the
+# project, i.e.  it tells the user what functionality he gets in the
+# resulting binaries.  If set_package_properties() is called multiple
+# times for a package, all PURPOSE properties are appended to a list of
+# purposes of the package in the project.  As the TYPE property, also
+# the PURPOSE property is project-specific, so it cannot be set by the
+# Find-module, but must be set in the project.
+#
+#
+#
+# Example for setting the info for a package:
+#
+# ::
+#
+#    find_package(LibXml2)
+#    set_package_properties(LibXml2 PROPERTIES
+#                           DESCRIPTION "A XML processing library."
+#                           URL "http://xmlsoft.org/")
+#
+#
+#
+# ::
+#
+#    set_package_properties(LibXml2 PROPERTIES
+#                           TYPE RECOMMENDED
+#                           PURPOSE "Enables HTML-import in MyWordProcessor")
+#    ...
+#    set_package_properties(LibXml2 PROPERTIES
+#                           TYPE OPTIONAL
+#                           PURPOSE "Enables odt-export in MyWordProcessor")
+#
+#
+#
+# ::
+#
+#    find_package(DBUS)
+#    set_package_properties(DBUS PROPERTIES
+#      TYPE RUNTIME
+#      PURPOSE "Necessary to disable the screensaver during a presentation" )
+#
+#
+#
+# ::
+#
+#     ADD_FEATURE_INFO(<name> <enabled> <description>)
+#
+# Use this macro to add information about a feature with the given
+# <name>.  <enabled> contains whether this feature is enabled or not,
+# <description> is a text describing the feature.  The information can
+# be displayed using feature_summary() for ENABLED_FEATURES and
+# DISABLED_FEATURES respectively.
+#
+# Example for setting the info for a feature:
+#
+# ::
+#
+#    option(WITH_FOO "Help for foo" ON)
+#    add_feature_info(Foo WITH_FOO "The Foo feature provides very cool stuff.")
+#
+#
+#
+#
+#
+# The following macros are provided for compatibility with previous
+# CMake versions:
+#
+# ::
+#
+#     SET_PACKAGE_INFO(<name> <description> [<url> [<purpose>] ] )
+#
+# Use this macro to set up information about the named package, which
+# can then be displayed via FEATURE_SUMMARY().  This can be done either
+# directly in the Find-module or in the project which uses the module
+# after the find_package() call.  The features for which information can
+# be set are added automatically by the find_package() command.
+#
+# ::
+#
+#     PRINT_ENABLED_FEATURES()
+#
+# Does the same as FEATURE_SUMMARY(WHAT ENABLED_FEATURES DESCRIPTION
+# "Enabled features:")
+#
+# ::
+#
+#     PRINT_DISABLED_FEATURES()
+#
+# Does the same as FEATURE_SUMMARY(WHAT DISABLED_FEATURES DESCRIPTION
+# "Disabled features:")
+#
+# ::
+#
+#     SET_FEATURE_INFO(<name> <description> [<url>] )
+#
+# Does the same as SET_PACKAGE_INFO(<name> <description> <url> )
+
+#=============================================================================
+# Copyright 2007-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include("${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake")
+
+
+function(ADD_FEATURE_INFO _name _enabled _desc)
+  if (${_enabled})
+    set_property(GLOBAL APPEND PROPERTY ENABLED_FEATURES "${_name}")
+  else ()
+    set_property(GLOBAL APPEND PROPERTY DISABLED_FEATURES "${_name}")
+  endif ()
+
+  set_property(GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION "${_desc}" )
+endfunction()
+
+
+
+function(SET_PACKAGE_PROPERTIES _name _props)
+  if(NOT "${_props}" STREQUAL "PROPERTIES")
+    message(FATAL_ERROR "PROPERTIES keyword is missing in SET_PACKAGE_PROPERTIES() call.")
+  endif()
+
+  set(options ) # none
+  set(oneValueArgs DESCRIPTION URL TYPE PURPOSE )
+  set(multiValueArgs ) # none
+
+  CMAKE_PARSE_ARGUMENTS(_SPP "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${ARGN})
+
+  if(_SPP_UNPARSED_ARGUMENTS)
+    message(FATAL_ERROR "Unknown keywords given to SET_PACKAGE_PROPERTIES(): \"${_SPP_UNPARSED_ARGUMENTS}\"")
+  endif()
+
+  if(_SPP_DESCRIPTION)
+    get_property(_info  GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION)
+    if(_info AND NOT "${_info}" STREQUAL "${_SPP_DESCRIPTION}")
+      message(STATUS "Warning: Property DESCRIPTION for package ${_name} already set to \"${_info}\", overriding it with \"${_SPP_DESCRIPTION}\"")
+    endif()
+
+    set_property(GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION "${_SPP_DESCRIPTION}" )
+  endif()
+
+
+  if(_SPP_URL)
+    get_property(_info  GLOBAL PROPERTY _CMAKE_${_name}_URL)
+    if(_info AND NOT "${_info}" STREQUAL "${_SPP_URL}")
+      message(STATUS "Warning: Property URL already set to \"${_info}\", overriding it with \"${_SPP_URL}\"")
+    endif()
+
+    set_property(GLOBAL PROPERTY _CMAKE_${_name}_URL "${_SPP_URL}" )
+  endif()
+
+
+  # handle the PURPOSE: use APPEND, since there can be multiple purposes for one package inside a project
+  if(_SPP_PURPOSE)
+    set_property(GLOBAL APPEND PROPERTY _CMAKE_${_name}_PURPOSE "${_SPP_PURPOSE}" )
+  endif()
+
+  # handle the TYPE
+  if(NOT _SPP_TYPE)
+    set(_SPP_TYPE OPTIONAL)
+  endif()
+
+  # List the supported types, according to their priority
+  set(validTypes "RUNTIME" "OPTIONAL" "RECOMMENDED" "REQUIRED" )
+  list(FIND validTypes ${_SPP_TYPE} _typeIndexInList)
+  if("${_typeIndexInList}" STREQUAL "-1" )
+    message(FATAL_ERROR "Bad package property type ${_SPP_TYPE} used in SET_PACKAGE_PROPERTIES(). "
+                        "Valid types are OPTIONAL, RECOMMENDED, REQUIRED and RUNTIME." )
+  endif()
+
+  get_property(_previousType  GLOBAL PROPERTY _CMAKE_${_name}_TYPE)
+  list(FIND validTypes "${_previousType}" _prevTypeIndexInList)
+
+  # make sure a previously set TYPE is not overridden with a lower new TYPE:
+  if("${_typeIndexInList}" GREATER "${_prevTypeIndexInList}")
+    set_property(GLOBAL PROPERTY _CMAKE_${_name}_TYPE "${_SPP_TYPE}" )
+  endif()
+
+endfunction()
+
+
+
+function(_FS_GET_FEATURE_SUMMARY _property _var _includeQuiet)
+
+  set(_type "ANY")
+  if("${_property}" MATCHES "REQUIRED_")
+    set(_type "REQUIRED")
+  elseif("${_property}" MATCHES "RECOMMENDED_")
+    set(_type "RECOMMENDED")
+  elseif("${_property}" MATCHES "RUNTIME_")
+    set(_type "RUNTIME")
+  elseif("${_property}" MATCHES "OPTIONAL_")
+    set(_type "OPTIONAL")
+  endif()
+
+  if("${_property}" MATCHES "PACKAGES_FOUND")
+    set(_property "PACKAGES_FOUND")
+  elseif("${_property}" MATCHES "PACKAGES_NOT_FOUND")
+    set(_property "PACKAGES_NOT_FOUND")
+  endif()
+
+
+  set(_currentFeatureText "")
+  get_property(_EnabledFeatures  GLOBAL PROPERTY ${_property})
+  if(_EnabledFeatures)
+    list(REMOVE_DUPLICATES _EnabledFeatures)
+  endif(_EnabledFeatures)
+
+  foreach(_currentFeature ${_EnabledFeatures})
+
+    # does this package belong to the type we currently want to list ?
+    get_property(_currentType  GLOBAL PROPERTY _CMAKE_${_currentFeature}_TYPE)
+    if(NOT _currentType)
+      set(_currentType OPTIONAL)
+    endif()
+
+    if("${_type}" STREQUAL ANY  OR  "${_type}" STREQUAL "${_currentType}")
+
+      # check whether the current feature/package should be in the output depending on whether it was QUIET or not
+      set(includeThisOne TRUE)
+      # skip QUIET packages, except if they are REQUIRED or INCLUDE_QUIET_PACKAGES has been set
+      if((NOT "${_currentType}" STREQUAL "REQUIRED") AND NOT _includeQuiet)
+        get_property(_isQuiet  GLOBAL PROPERTY _CMAKE_${_currentFeature}_QUIET)
+        if(_isQuiet)
+          set(includeThisOne FALSE)
+        endif()
+      endif()
+      get_property(_isTransitiveDepend
+        GLOBAL PROPERTY _CMAKE_${_currentFeature}_TRANSITIVE_DEPENDENCY
+      )
+      if(_isTransitiveDepend)
+        set(includeThisOne FALSE)
+      endif()
+
+      if(includeThisOne)
+
+        set(_currentFeatureText "${_currentFeatureText}\n * ${_currentFeature}")
+        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_REQUIRED_VERSION)
+        if(_info)
+          set(_currentFeatureText "${_currentFeatureText} (required version ${_info})")
+        endif()
+        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_DESCRIPTION)
+        if(_info)
+          set(_currentFeatureText "${_currentFeatureText} , ${_info}")
+        endif()
+        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_URL)
+        if(_info)
+          set(_currentFeatureText "${_currentFeatureText} , <${_info}>")
+        endif()
+
+        get_property(_info  GLOBAL PROPERTY _CMAKE_${_currentFeature}_PURPOSE)
+        foreach(_purpose ${_info})
+          set(_currentFeatureText "${_currentFeatureText}\n   ${_purpose}")
+        endforeach()
+
+      endif()
+
+    endif()
+
+  endforeach()
+  set(${_var} "${_currentFeatureText}" PARENT_SCOPE)
+endfunction()
+
+
+
+function(FEATURE_SUMMARY)
+# CMAKE_PARSE_ARGUMENTS(<prefix> <options> <one_value_keywords> <multi_value_keywords> args...)
+  set(options APPEND INCLUDE_QUIET_PACKAGES FATAL_ON_MISSING_REQUIRED_PACKAGES)
+  set(oneValueArgs FILENAME VAR DESCRIPTION)
+  set(multiValueArgs WHAT)
+
+  CMAKE_PARSE_ARGUMENTS(_FS "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${_FIRST_ARG} ${ARGN})
+
+  if(_FS_UNPARSED_ARGUMENTS)
+    message(FATAL_ERROR "Unknown keywords given to FEATURE_SUMMARY(): \"${_FS_UNPARSED_ARGUMENTS}\"")
+  endif()
+
+  if(NOT _FS_WHAT)
+    message(FATAL_ERROR "The call to FEATURE_SUMMARY() doesn't set the required WHAT argument.")
+  endif()
+
+  set(validWhatParts "ENABLED_FEATURES"
+                     "DISABLED_FEATURES"
+                     "PACKAGES_FOUND"
+                     "PACKAGES_NOT_FOUND"
+                     "OPTIONAL_PACKAGES_FOUND"
+                     "OPTIONAL_PACKAGES_NOT_FOUND"
+                     "RECOMMENDED_PACKAGES_FOUND"
+                     "RECOMMENDED_PACKAGES_NOT_FOUND"
+                     "REQUIRED_PACKAGES_FOUND"
+                     "REQUIRED_PACKAGES_NOT_FOUND"
+                     "RUNTIME_PACKAGES_FOUND"
+                     "RUNTIME_PACKAGES_NOT_FOUND")
+
+  list(FIND validWhatParts "${_FS_WHAT}" indexInList)
+  if(NOT "${indexInList}" STREQUAL "-1")
+    _FS_GET_FEATURE_SUMMARY( ${_FS_WHAT} _featureSummary ${_FS_INCLUDE_QUIET_PACKAGES} )
+    set(_fullText "${_FS_DESCRIPTION}${_featureSummary}\n")
+    if (("${_FS_WHAT}" STREQUAL "REQUIRED_PACKAGES_NOT_FOUND") AND _featureSummary)
+      set(requiredPackagesNotFound TRUE)
+    endif()
+
+  else()
+    if("${_FS_WHAT}" STREQUAL "ALL")
+
+      set(allWhatParts "ENABLED_FEATURES"
+                       "RUNTIME_PACKAGES_FOUND"
+                       "OPTIONAL_PACKAGES_FOUND"
+                       "RECOMMENDED_PACKAGES_FOUND"
+                       "REQUIRED_PACKAGES_FOUND"
+
+                       "DISABLED_FEATURES"
+                       "RUNTIME_PACKAGES_NOT_FOUND"
+                       "OPTIONAL_PACKAGES_NOT_FOUND"
+                       "RECOMMENDED_PACKAGES_NOT_FOUND"
+                       "REQUIRED_PACKAGES_NOT_FOUND"
+      )
+
+    else()
+      set(allWhatParts)
+      foreach(part ${_FS_WHAT})
+        list(FIND validWhatParts "${part}" indexInList)
+        if(NOT "${indexInList}" STREQUAL "-1")
+          list(APPEND allWhatParts "${part}")
+        else()
+          if("${part}" STREQUAL "ALL")
+            message(FATAL_ERROR "The WHAT argument of FEATURE_SUMMARY() contains ALL, which cannot be combined with other values.")
+          else()
+            message(FATAL_ERROR "The WHAT argument of FEATURE_SUMMARY() contains ${part}, which is not a valid value.")
+          endif()
+        endif()
+      endforeach()
+    endif()
+
+    set(title_ENABLED_FEATURES               "The following features have been enabled:")
+    set(title_DISABLED_FEATURES              "The following features have been disabled:")
+    set(title_PACKAGES_FOUND                 "The following packages have been found:")
+    set(title_PACKAGES_NOT_FOUND             "The following packages have not been found:")
+    set(title_OPTIONAL_PACKAGES_FOUND        "The following OPTIONAL packages have been found:")
+    set(title_OPTIONAL_PACKAGES_NOT_FOUND    "The following OPTIONAL packages have not been found:")
+    set(title_RECOMMENDED_PACKAGES_FOUND     "The following RECOMMENDED packages have been found:")
+    set(title_RECOMMENDED_PACKAGES_NOT_FOUND "The following RECOMMENDED packages have not been found:")
+    set(title_REQUIRED_PACKAGES_FOUND        "The following REQUIRED packages have been found:")
+    set(title_REQUIRED_PACKAGES_NOT_FOUND    "The following REQUIRED packages have not been found:")
+    set(title_RUNTIME_PACKAGES_FOUND         "The following RUNTIME packages have been found:")
+    set(title_RUNTIME_PACKAGES_NOT_FOUND     "The following RUNTIME packages have not been found:")
+
+    set(_fullText "${_FS_DESCRIPTION}")
+    foreach(part ${allWhatParts})
+      set(_tmp)
+      _FS_GET_FEATURE_SUMMARY( ${part} _tmp ${_FS_INCLUDE_QUIET_PACKAGES})
+      if(_tmp)
+        set(_fullText "${_fullText}\n-- ${title_${part}}\n${_tmp}\n")
+        if("${part}" STREQUAL "REQUIRED_PACKAGES_NOT_FOUND")
+          set(requiredPackagesNotFound TRUE)
+        endif()
+      endif()
+    endforeach()
+  endif()
+
+  if(_FS_FILENAME)
+    if(_FS_APPEND)
+      file(APPEND "${_FS_FILENAME}" "${_fullText}")
+    else()
+      file(WRITE  "${_FS_FILENAME}" "${_fullText}")
+    endif()
+
+  else()
+    if(NOT _FS_VAR)
+      message(STATUS "${_fullText}")
+    endif()
+  endif()
+
+  if(_FS_VAR)
+    set(${_FS_VAR} "${_fullText}" PARENT_SCOPE)
+  endif()
+
+  if(requiredPackagesNotFound  AND  _FS_FATAL_ON_MISSING_REQUIRED_PACKAGES)
+    message(FATAL_ERROR "feature_summary() Error: REQUIRED package(s) are missing, aborting CMake run.")
+  endif()
+
+endfunction()
+
+
+# The stuff below is only kept for compatibility
+
+function(SET_PACKAGE_INFO _name _desc)
+  unset(_url)
+  unset(_purpose)
+  if(ARGC GREATER 2)
+    set(_url "${ARGV2}")
+  endif()
+  if(ARGC GREATER 3)
+    set(_purpose "${ARGV3}")
+  endif()
+  set_property(GLOBAL PROPERTY _CMAKE_${_name}_DESCRIPTION "${_desc}" )
+  if(NOT _url STREQUAL "")
+    set_property(GLOBAL PROPERTY _CMAKE_${_name}_URL "${_url}" )
+  endif()
+  if(NOT _purpose STREQUAL "")
+    set_property(GLOBAL APPEND PROPERTY _CMAKE_${_name}_PURPOSE "${_purpose}" )
+  endif()
+endfunction()
+
+
+
+function(SET_FEATURE_INFO)
+  SET_PACKAGE_INFO(${ARGN})
+endfunction()
+
+
+
+function(PRINT_ENABLED_FEATURES)
+  FEATURE_SUMMARY(WHAT ENABLED_FEATURES  DESCRIPTION "Enabled features:")
+endfunction()
+
+
+
+function(PRINT_DISABLED_FEATURES)
+  FEATURE_SUMMARY(WHAT DISABLED_FEATURES  DESCRIPTION "Disabled features:")
+endfunction()
diff --git a/share/cmake-3.2/Modules/FindALSA.cmake b/share/cmake-3.6/Modules/FindALSA.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindALSA.cmake
rename to share/cmake-3.6/Modules/FindALSA.cmake
diff --git a/share/cmake-3.2/Modules/FindASPELL.cmake b/share/cmake-3.6/Modules/FindASPELL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindASPELL.cmake
rename to share/cmake-3.6/Modules/FindASPELL.cmake
diff --git a/share/cmake-3.2/Modules/FindAVIFile.cmake b/share/cmake-3.6/Modules/FindAVIFile.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindAVIFile.cmake
rename to share/cmake-3.6/Modules/FindAVIFile.cmake
diff --git a/share/cmake-3.2/Modules/FindArmadillo.cmake b/share/cmake-3.6/Modules/FindArmadillo.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindArmadillo.cmake
rename to share/cmake-3.6/Modules/FindArmadillo.cmake
diff --git a/share/cmake-3.6/Modules/FindBISON.cmake b/share/cmake-3.6/Modules/FindBISON.cmake
new file mode 100644
index 0000000..69293f5
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindBISON.cmake
@@ -0,0 +1,229 @@
+#.rst:
+# FindBISON
+# ---------
+#
+# Find ``bison`` executable and provide a macro to generate custom build rules.
+#
+# The module defines the following variables:
+#
+# ``BISON_EXECUTABLE``
+#   path to the ``bison`` program
+#
+# ``BISON_VERSION``
+#   version of ``bison``
+#
+# ``BISON_FOUND``
+#   true if the program was found
+#
+# The minimum required version of ``bison`` can be specified using the
+# standard CMake syntax, e.g.  ``find_package(BISON 2.1.3)``.
+#
+# If ``bison`` is found, the module defines the macro::
+#
+#   BISON_TARGET(<Name> <YaccInput> <CodeOutput>
+#                [COMPILE_FLAGS <flags>]
+#                [DEFINES_FILE <file>]
+#                [VERBOSE <file>]
+#                )
+#
+# which will create a custom rule to generate a parser.  ``<YaccInput>`` is
+# the path to a yacc file.  ``<CodeOutput>`` is the name of the source file
+# generated by bison.  A header file is also be generated, and contains
+# the token list.
+#
+# The options are:
+#
+# ``COMPILE_FLAGS <flags>``
+#   Specify flags to be added to the ``bison`` command line.
+#
+# ``DEFINES_FILE <file>``
+#   Specify a non-default header ``<file>`` to be generated by ``bison``.
+#
+# ``VERBOSE <file>``
+#   Tell ``bison`` to write verbose descriptions of the grammar and
+#   parser to the given ``<file>``.
+#
+# The macro defines the following variables:
+#
+# ``BISON_<Name>_DEFINED``
+#   true is the macro ran successfully
+#
+# ``BISON_<Name>_INPUT``
+#   The input source file, an alias for <YaccInput>
+#
+# ``BISON_<Name>_OUTPUT_SOURCE``
+#   The source file generated by bison
+#
+# ``BISON_<Name>_OUTPUT_HEADER``
+#   The header file generated by bison
+#
+# ``BISON_<Name>_OUTPUTS``
+#   The sources files generated by bison
+#
+# ``BISON_<Name>_COMPILE_FLAGS``
+#   Options used in the ``bison`` command line
+#
+# Example usage:
+#
+# .. code-block:: cmake
+#
+#   find_package(BISON)
+#   BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp
+#                DEFINES_FILE ${CMAKE_CURRENT_BINARY_DIR}/parser.h)
+#   add_executable(Foo main.cpp ${BISON_MyParser_OUTPUTS})
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+# Copyright 2006 Tristan Carel
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_program(BISON_EXECUTABLE NAMES bison win_bison DOC "path to the bison executable")
+mark_as_advanced(BISON_EXECUTABLE)
+
+include(CMakeParseArguments)
+
+if(BISON_EXECUTABLE)
+  # the bison commands should be executed with the C locale, otherwise
+  # the message (which are parsed) may be translated
+  set(_Bison_SAVED_LC_ALL "$ENV{LC_ALL}")
+  set(ENV{LC_ALL} C)
+
+  execute_process(COMMAND ${BISON_EXECUTABLE} --version
+    OUTPUT_VARIABLE BISON_version_output
+    ERROR_VARIABLE BISON_version_error
+    RESULT_VARIABLE BISON_version_result
+    OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+  set(ENV{LC_ALL} ${_Bison_SAVED_LC_ALL})
+
+  if(NOT ${BISON_version_result} EQUAL 0)
+    message(SEND_ERROR "Command \"${BISON_EXECUTABLE} --version\" failed with output:\n${BISON_version_error}")
+  else()
+    # Bison++
+    if("${BISON_version_output}" MATCHES "^bison\\+\\+ Version ([^,]+)")
+      set(BISON_VERSION "${CMAKE_MATCH_1}")
+    # GNU Bison
+    elseif("${BISON_version_output}" MATCHES "^bison \\(GNU Bison\\) ([^\n]+)\n")
+      set(BISON_VERSION "${CMAKE_MATCH_1}")
+    elseif("${BISON_version_output}" MATCHES "^GNU Bison (version )?([^\n]+)")
+      set(BISON_VERSION "${CMAKE_MATCH_2}")
+    endif()
+  endif()
+
+  # internal macro
+  macro(BISON_TARGET_option_verbose Name BisonOutput filename)
+    list(APPEND BISON_TARGET_cmdopt "--verbose")
+    get_filename_component(BISON_TARGET_output_path "${BisonOutput}" PATH)
+    get_filename_component(BISON_TARGET_output_name "${BisonOutput}" NAME_WE)
+    add_custom_command(OUTPUT ${filename}
+      COMMAND ${CMAKE_COMMAND} -E copy
+      "${BISON_TARGET_output_path}/${BISON_TARGET_output_name}.output"
+      "${filename}"
+      VERBATIM
+      DEPENDS
+      "${BISON_TARGET_output_path}/${BISON_TARGET_output_name}.output"
+      COMMENT "[BISON][${Name}] Copying bison verbose table to ${filename}"
+      WORKING_DIRECTORY ${CMAKE_SOURCE_DIR})
+    set(BISON_${Name}_VERBOSE_FILE ${filename})
+    list(APPEND BISON_TARGET_extraoutputs
+      "${BISON_TARGET_output_path}/${BISON_TARGET_output_name}.output")
+  endmacro()
+
+  # internal macro
+  macro(BISON_TARGET_option_extraopts Options)
+    set(BISON_TARGET_extraopts "${Options}")
+    separate_arguments(BISON_TARGET_extraopts)
+    list(APPEND BISON_TARGET_cmdopt ${BISON_TARGET_extraopts})
+  endmacro()
+
+  # internal macro
+  macro(BISON_TARGET_option_defines Header)
+    set(BISON_TARGET_output_header "${Header}")
+    list(APPEND BISON_TARGET_cmdopt --defines=${BISON_TARGET_output_header})
+  endmacro()
+
+  #============================================================
+  # BISON_TARGET (public macro)
+  #============================================================
+  #
+  macro(BISON_TARGET Name BisonInput BisonOutput)
+    set(BISON_TARGET_output_header "")
+    set(BISON_TARGET_cmdopt "")
+    set(BISON_TARGET_outputs "${BisonOutput}")
+
+    # Parsing parameters
+    set(BISON_TARGET_PARAM_OPTIONS)
+    set(BISON_TARGET_PARAM_ONE_VALUE_KEYWORDS
+      VERBOSE
+      COMPILE_FLAGS
+      DEFINES_FILE
+      )
+    set(BISON_TARGET_PARAM_MULTI_VALUE_KEYWORDS)
+    cmake_parse_arguments(
+        BISON_TARGET_ARG
+        "${BISON_TARGET_PARAM_OPTIONS}"
+        "${BISON_TARGET_PARAM_ONE_VALUE_KEYWORDS}"
+        "${BISON_TARGET_PARAM_MULTI_VALUE_KEYWORDS}"
+        ${ARGN}
+    )
+
+    if(NOT "${BISON_TARGET_ARG_UNPARSED_ARGUMENTS}" STREQUAL "")
+      message(SEND_ERROR "Usage")
+    else()
+      if(NOT "${BISON_TARGET_ARG_VERBOSE}" STREQUAL "")
+        BISON_TARGET_option_verbose(${Name} ${BisonOutput} "${BISON_TARGET_ARG_VERBOSE}")
+      endif()
+      if(NOT "${BISON_TARGET_ARG_COMPILE_FLAGS}" STREQUAL "")
+        BISON_TARGET_option_extraopts("${BISON_TARGET_ARG_COMPILE_FLAGS}")
+      endif()
+      if(NOT "${BISON_TARGET_ARG_DEFINES_FILE}" STREQUAL "")
+        BISON_TARGET_option_defines("${BISON_TARGET_ARG_DEFINES_FILE}")
+      endif()
+
+      if("${BISON_TARGET_output_header}" STREQUAL "")
+        # Header's name generated by bison (see option -d)
+        list(APPEND BISON_TARGET_cmdopt "-d")
+        string(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\2" _fileext "${BisonOutput}")
+        string(REPLACE "c" "h" _fileext ${_fileext})
+        string(REGEX REPLACE "^(.*)(\\.[^.]*)$" "\\1${_fileext}"
+            BISON_TARGET_output_header "${BisonOutput}")
+      endif()
+      list(APPEND BISON_TARGET_outputs "${BISON_TARGET_output_header}")
+
+      add_custom_command(OUTPUT ${BISON_TARGET_outputs}
+        ${BISON_TARGET_extraoutputs}
+        COMMAND ${BISON_EXECUTABLE} ${BISON_TARGET_cmdopt} -o ${BisonOutput} ${BisonInput}
+        VERBATIM
+        DEPENDS ${BisonInput}
+        COMMENT "[BISON][${Name}] Building parser with bison ${BISON_VERSION}"
+        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
+
+      # define target variables
+      set(BISON_${Name}_DEFINED TRUE)
+      set(BISON_${Name}_INPUT ${BisonInput})
+      set(BISON_${Name}_OUTPUTS ${BISON_TARGET_outputs})
+      set(BISON_${Name}_COMPILE_FLAGS ${BISON_TARGET_cmdopt})
+      set(BISON_${Name}_OUTPUT_SOURCE "${BisonOutput}")
+      set(BISON_${Name}_OUTPUT_HEADER "${BISON_TARGET_output_header}")
+
+    endif()
+  endmacro()
+  #
+  #============================================================
+
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(BISON REQUIRED_VARS  BISON_EXECUTABLE
+                                        VERSION_VAR BISON_VERSION)
+
+# FindBISON.cmake ends here
diff --git a/share/cmake-3.6/Modules/FindBLAS.cmake b/share/cmake-3.6/Modules/FindBLAS.cmake
new file mode 100644
index 0000000..728494c
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindBLAS.cmake
@@ -0,0 +1,703 @@
+#.rst:
+# FindBLAS
+# --------
+#
+# Find BLAS library
+#
+# This module finds an installed fortran library that implements the
+# BLAS linear-algebra interface (see http://www.netlib.org/blas/).  The
+# list of libraries searched for is taken from the autoconf macro file,
+# acx_blas.m4 (distributed at
+# http://ac-archive.sourceforge.net/ac-archive/acx_blas.html).
+#
+# This module sets the following variables:
+#
+# ::
+#
+#   BLAS_FOUND - set to true if a library implementing the BLAS interface
+#     is found
+#   BLAS_LINKER_FLAGS - uncached list of required linker flags (excluding -l
+#     and -L).
+#   BLAS_LIBRARIES - uncached list of libraries (using full path name) to
+#     link against to use BLAS
+#   BLAS95_LIBRARIES - uncached list of libraries (using full path name)
+#     to link against to use BLAS95 interface
+#   BLAS95_FOUND - set to true if a library implementing the BLAS f95 interface
+#     is found
+#   BLA_STATIC  if set on this determines what kind of linkage we do (static)
+#   BLA_VENDOR  if set checks only the specified vendor, if not set checks
+#      all the possibilities
+#   BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
+#
+# ######### ## List of vendors (BLA_VENDOR) valid in this module #
+# Goto,OpenBLAS,ATLAS PhiPACK,CXML,DXML,SunPerf,SCSL,SGIMATH,IBMESSL,
+# Intel10_32 (intel mkl v10 32 bit),Intel10_64lp (intel mkl v10 64 bit,
+# lp thread model, lp64 model), # Intel10_64lp_seq (intel mkl v10 64
+# bit,sequential code, lp64 model), # Intel( older versions of mkl 32
+# and 64 bit), ACML,ACML_MP,ACML_GPU,Apple, NAS, Generic C/CXX should be
+# enabled to use Intel mkl
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(${CMAKE_CURRENT_LIST_DIR}/CheckFunctionExists.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/CheckFortranFunctionExists.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/CMakePushCheckState.cmake)
+cmake_push_check_state()
+set(CMAKE_REQUIRED_QUIET ${BLAS_FIND_QUIETLY})
+
+set(_blas_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
+
+# Check the language being used
+if( NOT (CMAKE_C_COMPILER_LOADED OR CMAKE_CXX_COMPILER_LOADED OR CMAKE_Fortran_COMPILER_LOADED) )
+  if(BLAS_FIND_REQUIRED)
+    message(FATAL_ERROR "FindBLAS requires Fortran, C, or C++ to be enabled.")
+  else()
+    message(STATUS "Looking for BLAS... - NOT found (Unsupported languages)")
+    return()
+  endif()
+endif()
+
+macro(Check_Fortran_Libraries LIBRARIES _prefix _name _flags _list _thread)
+# This macro checks for the existence of the combination of fortran libraries
+# given by _list.  If the combination is found, this macro checks (using the
+# Check_Fortran_Function_Exists macro) whether can link against that library
+# combination using the name of a routine given by _name using the linker
+# flags given by _flags.  If the combination of libraries is found and passes
+# the link test, LIBRARIES is set to the list of complete library paths that
+# have been found.  Otherwise, LIBRARIES is set to FALSE.
+
+# N.B. _prefix is the prefix applied to the names of all cached variables that
+# are generated internally and marked advanced by this macro.
+
+set(_libdir ${ARGN})
+
+set(_libraries_work TRUE)
+set(${LIBRARIES})
+set(_combined_name)
+if (NOT _libdir)
+  if (WIN32)
+    set(_libdir ENV LIB)
+  elseif (APPLE)
+    set(_libdir ENV DYLD_LIBRARY_PATH)
+  else ()
+    set(_libdir ENV LD_LIBRARY_PATH)
+  endif ()
+endif ()
+
+foreach(_library ${_list})
+  set(_combined_name ${_combined_name}_${_library})
+
+  if(_libraries_work)
+    if (BLA_STATIC)
+      if (WIN32)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif ()
+      if (APPLE)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      else ()
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif ()
+    else ()
+      if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
+        # for ubuntu's libblas3gf and liblapack3gf packages
+        set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES} .so.3gf)
+      endif ()
+    endif ()
+    find_library(${_prefix}_${_library}_LIBRARY
+      NAMES ${_library}
+      PATHS ${_libdir}
+      )
+    mark_as_advanced(${_prefix}_${_library}_LIBRARY)
+    set(${LIBRARIES} ${${LIBRARIES}} ${${_prefix}_${_library}_LIBRARY})
+    set(_libraries_work ${${_prefix}_${_library}_LIBRARY})
+  endif()
+endforeach()
+if(_libraries_work)
+  # Test this combination of libraries.
+  set(CMAKE_REQUIRED_LIBRARIES ${_flags} ${${LIBRARIES}} ${_thread})
+#  message("DEBUG: CMAKE_REQUIRED_LIBRARIES = ${CMAKE_REQUIRED_LIBRARIES}")
+  if (CMAKE_Fortran_COMPILER_LOADED)
+    check_fortran_function_exists("${_name}" ${_prefix}${_combined_name}_WORKS)
+  else()
+    check_function_exists("${_name}_" ${_prefix}${_combined_name}_WORKS)
+  endif()
+  set(CMAKE_REQUIRED_LIBRARIES)
+  mark_as_advanced(${_prefix}${_combined_name}_WORKS)
+  set(_libraries_work ${${_prefix}${_combined_name}_WORKS})
+endif()
+if(NOT _libraries_work)
+  set(${LIBRARIES} FALSE)
+endif()
+#message("DEBUG: ${LIBRARIES} = ${${LIBRARIES}}")
+endmacro()
+
+set(BLAS_LINKER_FLAGS)
+set(BLAS_LIBRARIES)
+set(BLAS95_LIBRARIES)
+if (NOT $ENV{BLA_VENDOR} STREQUAL "")
+  set(BLA_VENDOR $ENV{BLA_VENDOR})
+else ()
+  if(NOT BLA_VENDOR)
+    set(BLA_VENDOR "All")
+  endif()
+endif ()
+
+if (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  # gotoblas (http://www.tacc.utexas.edu/tacc-projects/gotoblas2)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "goto2"
+  ""
+  )
+ endif()
+endif ()
+
+if (BLA_VENDOR STREQUAL "OpenBLAS" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  # OpenBLAS (http://www.openblas.net)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "openblas"
+  ""
+  )
+ endif()
+endif ()
+
+if (BLA_VENDOR STREQUAL "ATLAS" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  # BLAS in ATLAS library? (http://math-atlas.sourceforge.net/)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  dgemm
+  ""
+  "f77blas;atlas"
+  ""
+  )
+ endif()
+endif ()
+
+# BLAS in PhiPACK libraries? (requires generic BLAS lib, too)
+if (BLA_VENDOR STREQUAL "PhiPACK" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "sgemm;dgemm;blas"
+  ""
+  )
+ endif()
+endif ()
+
+# BLAS in Alpha CXML library?
+if (BLA_VENDOR STREQUAL "CXML" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "cxml"
+  ""
+  )
+ endif()
+endif ()
+
+# BLAS in Alpha DXML library? (now called CXML, see above)
+if (BLA_VENDOR STREQUAL "DXML" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "dxml"
+  ""
+  )
+ endif()
+endif ()
+
+# BLAS in Sun Performance library?
+if (BLA_VENDOR STREQUAL "SunPerf" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  "-xlic_lib=sunperf"
+  "sunperf;sunmath"
+  ""
+  )
+  if(BLAS_LIBRARIES)
+    set(BLAS_LINKER_FLAGS "-xlic_lib=sunperf")
+  endif()
+ endif()
+endif ()
+
+# BLAS in SCSL library?  (SGI/Cray Scientific Library)
+if (BLA_VENDOR STREQUAL "SCSL" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "scsl"
+  ""
+  )
+ endif()
+endif ()
+
+# BLAS in SGIMATH library?
+if (BLA_VENDOR STREQUAL "SGIMATH" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "complib.sgimath"
+  ""
+  )
+ endif()
+endif ()
+
+# BLAS in IBM ESSL library? (requires generic BLAS lib, too)
+if (BLA_VENDOR STREQUAL "IBMESSL" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "essl;blas"
+  ""
+  )
+ endif()
+endif ()
+
+#BLAS in acml library?
+if (BLA_VENDOR MATCHES "ACML" OR BLA_VENDOR STREQUAL "All")
+ if( ((BLA_VENDOR STREQUAL "ACML") AND (NOT BLAS_ACML_LIB_DIRS)) OR
+     ((BLA_VENDOR STREQUAL "ACML_MP") AND (NOT BLAS_ACML_MP_LIB_DIRS)) OR
+     ((BLA_VENDOR STREQUAL "ACML_GPU") AND (NOT BLAS_ACML_GPU_LIB_DIRS))
+   )
+   # try to find acml in "standard" paths
+   if( WIN32 )
+    file( GLOB _ACML_ROOT "C:/AMD/acml*/ACML-EULA.txt" )
+   else()
+    file( GLOB _ACML_ROOT "/opt/acml*/ACML-EULA.txt" )
+   endif()
+   if( WIN32 )
+    file( GLOB _ACML_GPU_ROOT "C:/AMD/acml*/GPGPUexamples" )
+   else()
+    file( GLOB _ACML_GPU_ROOT "/opt/acml*/GPGPUexamples" )
+   endif()
+   list(GET _ACML_ROOT 0 _ACML_ROOT)
+   list(GET _ACML_GPU_ROOT 0 _ACML_GPU_ROOT)
+   if( _ACML_ROOT )
+    get_filename_component( _ACML_ROOT ${_ACML_ROOT} PATH )
+    if( SIZEOF_INTEGER EQUAL 8 )
+     set( _ACML_PATH_SUFFIX "_int64" )
+    else()
+    set( _ACML_PATH_SUFFIX "" )
+   endif()
+   if( CMAKE_Fortran_COMPILER_ID STREQUAL "Intel" )
+    set( _ACML_COMPILER32 "ifort32" )
+    set( _ACML_COMPILER64 "ifort64" )
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "SunPro" )
+    set( _ACML_COMPILER32 "sun32" )
+    set( _ACML_COMPILER64 "sun64" )
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "PGI" )
+    set( _ACML_COMPILER32 "pgi32" )
+    if( WIN32 )
+     set( _ACML_COMPILER64 "win64" )
+    else()
+     set( _ACML_COMPILER64 "pgi64" )
+    endif()
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "Open64" )
+    # 32 bit builds not supported on Open64 but for code simplicity
+    # We'll just use the same directory twice
+    set( _ACML_COMPILER32 "open64_64" )
+    set( _ACML_COMPILER64 "open64_64" )
+   elseif( CMAKE_Fortran_COMPILER_ID STREQUAL "NAG" )
+    set( _ACML_COMPILER32 "nag32" )
+    set( _ACML_COMPILER64 "nag64" )
+   else()
+    set( _ACML_COMPILER32 "gfortran32" )
+    set( _ACML_COMPILER64 "gfortran64" )
+   endif()
+
+   if( BLA_VENDOR STREQUAL "ACML_MP" )
+    set(_ACML_MP_LIB_DIRS
+     "${_ACML_ROOT}/${_ACML_COMPILER32}_mp${_ACML_PATH_SUFFIX}/lib"
+     "${_ACML_ROOT}/${_ACML_COMPILER64}_mp${_ACML_PATH_SUFFIX}/lib" )
+   else()
+    set(_ACML_LIB_DIRS
+     "${_ACML_ROOT}/${_ACML_COMPILER32}${_ACML_PATH_SUFFIX}/lib"
+     "${_ACML_ROOT}/${_ACML_COMPILER64}${_ACML_PATH_SUFFIX}/lib" )
+   endif()
+  endif()
+ elseif(BLAS_${BLA_VENDOR}_LIB_DIRS)
+   set(_${BLA_VENDOR}_LIB_DIRS ${BLAS_${BLA_VENDOR}_LIB_DIRS})
+ endif()
+
+ if( BLA_VENDOR STREQUAL "ACML_MP" )
+  foreach( BLAS_ACML_MP_LIB_DIRS ${_ACML_MP_LIB_DIRS})
+   check_fortran_libraries (
+     BLAS_LIBRARIES
+     BLAS
+     sgemm
+     "" "acml_mp;acml_mv" "" ${BLAS_ACML_MP_LIB_DIRS}
+   )
+   if( BLAS_LIBRARIES )
+    break()
+   endif()
+  endforeach()
+ elseif( BLA_VENDOR STREQUAL "ACML_GPU" )
+  foreach( BLAS_ACML_GPU_LIB_DIRS ${_ACML_GPU_LIB_DIRS})
+   check_fortran_libraries (
+     BLAS_LIBRARIES
+     BLAS
+     sgemm
+     "" "acml;acml_mv;CALBLAS" "" ${BLAS_ACML_GPU_LIB_DIRS}
+   )
+   if( BLAS_LIBRARIES )
+    break()
+   endif()
+  endforeach()
+ else()
+  foreach( BLAS_ACML_LIB_DIRS ${_ACML_LIB_DIRS} )
+   check_fortran_libraries (
+     BLAS_LIBRARIES
+     BLAS
+     sgemm
+     "" "acml;acml_mv" "" ${BLAS_ACML_LIB_DIRS}
+   )
+   if( BLAS_LIBRARIES )
+    break()
+   endif()
+  endforeach()
+ endif()
+
+ # Either acml or acml_mp should be in LD_LIBRARY_PATH but not both
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "acml;acml_mv"
+  ""
+  )
+ endif()
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "acml_mp;acml_mv"
+  ""
+  )
+ endif()
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "acml;acml_mv;CALBLAS"
+  ""
+  )
+ endif()
+endif () # ACML
+
+# Apple BLAS library?
+if (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
+if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  dgemm
+  ""
+  "Accelerate"
+  ""
+  )
+ endif()
+endif ()
+
+if (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
+ if ( NOT BLAS_LIBRARIES )
+    check_fortran_libraries(
+    BLAS_LIBRARIES
+    BLAS
+    dgemm
+    ""
+    "vecLib"
+    ""
+    )
+ endif ()
+endif ()
+# Generic BLAS library?
+if (BLA_VENDOR STREQUAL "Generic" OR BLA_VENDOR STREQUAL "All")
+ if(NOT BLAS_LIBRARIES)
+  check_fortran_libraries(
+  BLAS_LIBRARIES
+  BLAS
+  sgemm
+  ""
+  "blas"
+  ""
+  )
+ endif()
+endif ()
+
+#BLAS in intel mkl 10 library? (em64t 64bit)
+if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All")
+ if (NOT WIN32)
+  set(LM "-lm")
+ endif ()
+ if (CMAKE_C_COMPILER_LOADED OR CMAKE_CXX_COMPILER_LOADED)
+  if(BLAS_FIND_QUIETLY OR NOT BLAS_FIND_REQUIRED)
+    find_package(Threads)
+  else()
+    find_package(Threads REQUIRED)
+  endif()
+
+  set(BLAS_SEARCH_LIBS "")
+
+  if(BLA_F95)
+    set(BLAS_mkl_SEARCH_SYMBOL SGEMM)
+    set(_LIBRARIES BLAS95_LIBRARIES)
+    if (WIN32)
+      if (BLA_STATIC)
+        set(BLAS_mkl_DLL_SUFFIX "")
+      else()
+        set(BLAS_mkl_DLL_SUFFIX "_dll")
+      endif()
+
+      # Find the main file (32-bit or 64-bit)
+      set(BLAS_SEARCH_LIBS_WIN_MAIN "")
+      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
+          "mkl_blas95${BLAS_mkl_DLL_SUFFIX} mkl_intel_c${BLAS_mkl_DLL_SUFFIX}")
+      endif()
+      if (BLA_VENDOR MATCHES "^Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
+          "mkl_blas95_lp64${BLAS_mkl_DLL_SUFFIX} mkl_intel_lp64${BLAS_mkl_DLL_SUFFIX}")
+      endif ()
+
+      # Add threading/sequential libs
+      set(BLAS_SEARCH_LIBS_WIN_THREAD "")
+      if (BLA_VENDOR MATCHES "_seq$" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
+          "mkl_sequential${BLAS_mkl_DLL_SUFFIX}")
+      endif()
+      if (NOT BLA_VENDOR MATCHES "_seq$" OR BLA_VENDOR STREQUAL "All")
+        # old version
+        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
+          "libguide40 mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
+        # mkl >= 10.3
+        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
+          "libiomp5md mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
+      endif()
+
+      # Cartesian product of the above
+      foreach (MAIN ${BLAS_SEARCH_LIBS_WIN_MAIN})
+        foreach (THREAD ${BLAS_SEARCH_LIBS_WIN_THREAD})
+          list(APPEND BLAS_SEARCH_LIBS
+            "${MAIN} ${THREAD} mkl_core${BLAS_mkl_DLL_SUFFIX}")
+        endforeach()
+      endforeach()
+    else ()
+      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_blas95 mkl_intel mkl_intel_thread mkl_core guide")
+      endif ()
+      if (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
+        # old version
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_blas95 mkl_intel_lp64 mkl_intel_thread mkl_core guide")
+
+        # mkl >= 10.3
+        if (CMAKE_C_COMPILER MATCHES ".+gcc")
+          list(APPEND BLAS_SEARCH_LIBS
+            "mkl_blas95_lp64 mkl_intel_lp64 mkl_gnu_thread mkl_core gomp")
+        else ()
+          list(APPEND BLAS_SEARCH_LIBS
+            "mkl_blas95_lp64 mkl_intel_lp64 mkl_intel_thread mkl_core iomp5")
+        endif ()
+      endif ()
+      if (BLA_VENDOR STREQUAL "Intel10_64lp_seq" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_intel_lp64 mkl_sequential mkl_core")
+      endif ()
+    endif ()
+  else ()
+    set(BLAS_mkl_SEARCH_SYMBOL sgemm)
+    set(_LIBRARIES BLAS_LIBRARIES)
+    if (WIN32)
+      if (BLA_STATIC)
+        set(BLAS_mkl_DLL_SUFFIX "")
+      else()
+        set(BLAS_mkl_DLL_SUFFIX "_dll")
+      endif()
+
+      # Find the main file (32-bit or 64-bit)
+      set(BLAS_SEARCH_LIBS_WIN_MAIN "")
+      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
+          "mkl_intel_c${BLAS_mkl_DLL_SUFFIX}")
+      endif()
+      if (BLA_VENDOR MATCHES "^Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN
+          "mkl_intel_lp64${BLAS_mkl_DLL_SUFFIX}")
+      endif ()
+
+      # Add threading/sequential libs
+      set(BLAS_SEARCH_LIBS_WIN_THREAD "")
+      if (NOT BLA_VENDOR MATCHES "_seq$" OR BLA_VENDOR STREQUAL "All")
+        # old version
+        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
+          "libguide40 mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
+        # mkl >= 10.3
+        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
+          "libiomp5md mkl_intel_thread${BLAS_mkl_DLL_SUFFIX}")
+      endif()
+      if (BLA_VENDOR MATCHES "_seq$" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS_WIN_THREAD
+          "mkl_sequential${BLAS_mkl_DLL_SUFFIX}")
+      endif()
+
+      # Cartesian product of the above
+      foreach (MAIN ${BLAS_SEARCH_LIBS_WIN_MAIN})
+        foreach (THREAD ${BLAS_SEARCH_LIBS_WIN_THREAD})
+          list(APPEND BLAS_SEARCH_LIBS
+            "${MAIN} ${THREAD} mkl_core${BLAS_mkl_DLL_SUFFIX}")
+        endforeach()
+      endforeach()
+    else ()
+      if (BLA_VENDOR STREQUAL "Intel10_32" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_intel mkl_intel_thread mkl_core guide")
+      endif ()
+      if (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All")
+
+        # old version
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_intel_lp64 mkl_intel_thread mkl_core guide")
+
+        # mkl >= 10.3
+        if (CMAKE_C_COMPILER MATCHES ".+gcc")
+          list(APPEND BLAS_SEARCH_LIBS
+            "mkl_intel_lp64 mkl_gnu_thread mkl_core gomp")
+        else ()
+          list(APPEND BLAS_SEARCH_LIBS
+            "mkl_intel_lp64 mkl_intel_thread mkl_core iomp5")
+        endif ()
+      endif ()
+      if (BLA_VENDOR STREQUAL "Intel10_64lp_seq" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_intel_lp64 mkl_sequential mkl_core")
+      endif ()
+
+      #older vesions of intel mkl libs
+      if (BLA_VENDOR STREQUAL "Intel" OR BLA_VENDOR STREQUAL "All")
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl")
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_ia32")
+        list(APPEND BLAS_SEARCH_LIBS
+          "mkl_em64t")
+      endif ()
+    endif ()
+  endif ()
+
+  foreach (IT ${BLAS_SEARCH_LIBS})
+    string(REPLACE " " ";" SEARCH_LIBS ${IT})
+    if (${_LIBRARIES})
+    else ()
+      check_fortran_libraries(
+        ${_LIBRARIES}
+        BLAS
+        ${BLAS_mkl_SEARCH_SYMBOL}
+        ""
+        "${SEARCH_LIBS}"
+        "${CMAKE_THREAD_LIBS_INIT};${LM}"
+        )
+    endif ()
+  endforeach ()
+
+ endif ()
+endif ()
+
+
+if(BLA_F95)
+ if(BLAS95_LIBRARIES)
+    set(BLAS95_FOUND TRUE)
+  else()
+    set(BLAS95_FOUND FALSE)
+  endif()
+
+  if(NOT BLAS_FIND_QUIETLY)
+    if(BLAS95_FOUND)
+      message(STATUS "A library with BLAS95 API found.")
+    else()
+      if(BLAS_FIND_REQUIRED)
+        message(FATAL_ERROR
+        "A required library with BLAS95 API not found. Please specify library location.")
+      else()
+        message(STATUS
+        "A library with BLAS95 API not found. Please specify library location.")
+      endif()
+    endif()
+  endif()
+  set(BLAS_FOUND TRUE)
+  set(BLAS_LIBRARIES "${BLAS95_LIBRARIES}")
+else()
+  if(BLAS_LIBRARIES)
+    set(BLAS_FOUND TRUE)
+  else()
+    set(BLAS_FOUND FALSE)
+  endif()
+
+  if(NOT BLAS_FIND_QUIETLY)
+    if(BLAS_FOUND)
+      message(STATUS "A library with BLAS API found.")
+    else()
+      if(BLAS_FIND_REQUIRED)
+        message(FATAL_ERROR
+        "A required library with BLAS API not found. Please specify library location."
+        )
+      else()
+        message(STATUS
+        "A library with BLAS API not found. Please specify library location."
+        )
+      endif()
+    endif()
+  endif()
+endif()
+
+cmake_pop_check_state()
+set(CMAKE_FIND_LIBRARY_SUFFIXES ${_blas_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
diff --git a/share/cmake-3.6/Modules/FindBZip2.cmake b/share/cmake-3.6/Modules/FindBZip2.cmake
new file mode 100644
index 0000000..6af42dd
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindBZip2.cmake
@@ -0,0 +1,69 @@
+#.rst:
+# FindBZip2
+# ---------
+#
+# Try to find BZip2
+#
+# Once done this will define
+#
+# ::
+#
+#   BZIP2_FOUND - system has BZip2
+#   BZIP2_INCLUDE_DIR - the BZip2 include directory
+#   BZIP2_LIBRARIES - Link these to use BZip2
+#   BZIP2_NEED_PREFIX - this is set if the functions are prefixed with BZ2_
+#   BZIP2_VERSION_STRING - the version of BZip2 found (since CMake 2.8.8)
+
+#=============================================================================
+# Copyright 2006-2012 Kitware, Inc.
+# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
+# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(_BZIP2_PATHS PATHS
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\Bzip2;InstallPath]"
+  )
+
+find_path(BZIP2_INCLUDE_DIR bzlib.h ${_BZIP2_PATHS} PATH_SUFFIXES include)
+
+if (NOT BZIP2_LIBRARIES)
+    find_library(BZIP2_LIBRARY_RELEASE NAMES bz2 bzip2 ${_BZIP2_PATHS} PATH_SUFFIXES lib)
+    find_library(BZIP2_LIBRARY_DEBUG NAMES bzip2d ${_BZIP2_PATHS} PATH_SUFFIXES lib)
+
+    include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+    SELECT_LIBRARY_CONFIGURATIONS(BZIP2)
+endif ()
+
+if (BZIP2_INCLUDE_DIR AND EXISTS "${BZIP2_INCLUDE_DIR}/bzlib.h")
+    file(STRINGS "${BZIP2_INCLUDE_DIR}/bzlib.h" BZLIB_H REGEX "bzip2/libbzip2 version [0-9]+\\.[^ ]+ of [0-9]+ ")
+    string(REGEX REPLACE ".* bzip2/libbzip2 version ([0-9]+\\.[^ ]+) of [0-9]+ .*" "\\1" BZIP2_VERSION_STRING "${BZLIB_H}")
+endif ()
+
+# handle the QUIETLY and REQUIRED arguments and set BZip2_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(BZip2
+                                  REQUIRED_VARS BZIP2_LIBRARIES BZIP2_INCLUDE_DIR
+                                  VERSION_VAR BZIP2_VERSION_STRING)
+
+if (BZIP2_FOUND)
+   include(${CMAKE_CURRENT_LIST_DIR}/CheckSymbolExists.cmake)
+   include(${CMAKE_CURRENT_LIST_DIR}/CMakePushCheckState.cmake)
+   cmake_push_check_state()
+   set(CMAKE_REQUIRED_QUIET ${BZip2_FIND_QUIETLY})
+   set(CMAKE_REQUIRED_INCLUDES ${BZIP2_INCLUDE_DIR})
+   set(CMAKE_REQUIRED_LIBRARIES ${BZIP2_LIBRARIES})
+   CHECK_SYMBOL_EXISTS(BZ2_bzCompressInit "bzlib.h" BZIP2_NEED_PREFIX)
+   cmake_pop_check_state()
+endif ()
+
+mark_as_advanced(BZIP2_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindBacktrace.cmake b/share/cmake-3.6/Modules/FindBacktrace.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindBacktrace.cmake
rename to share/cmake-3.6/Modules/FindBacktrace.cmake
diff --git a/share/cmake-3.6/Modules/FindBoost.cmake b/share/cmake-3.6/Modules/FindBoost.cmake
new file mode 100644
index 0000000..67d71d0
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindBoost.cmake
@@ -0,0 +1,1804 @@
+#.rst:
+# FindBoost
+# ---------
+#
+# Find Boost include dirs and libraries
+#
+# Use this module by invoking find_package with the form::
+#
+#   find_package(Boost
+#     [version] [EXACT]      # Minimum or EXACT version e.g. 1.36.0
+#     [REQUIRED]             # Fail with error if Boost is not found
+#     [COMPONENTS <libs>...] # Boost libraries by their canonical name
+#     )                      # e.g. "date_time" for "libboost_date_time"
+#
+# This module finds headers and requested component libraries OR a CMake
+# package configuration file provided by a "Boost CMake" build.  For the
+# latter case skip to the "Boost CMake" section below.  For the former
+# case results are reported in variables::
+#
+#   Boost_FOUND            - True if headers and requested libraries were found
+#   Boost_INCLUDE_DIRS     - Boost include directories
+#   Boost_LIBRARY_DIRS     - Link directories for Boost libraries
+#   Boost_LIBRARIES        - Boost component libraries to be linked
+#   Boost_<C>_FOUND        - True if component <C> was found (<C> is upper-case)
+#   Boost_<C>_LIBRARY      - Libraries to link for component <C> (may include
+#                            target_link_libraries debug/optimized keywords)
+#   Boost_VERSION          - BOOST_VERSION value from boost/version.hpp
+#   Boost_LIB_VERSION      - Version string appended to library filenames
+#   Boost_MAJOR_VERSION    - Boost major version number (X in X.y.z)
+#   Boost_MINOR_VERSION    - Boost minor version number (Y in x.Y.z)
+#   Boost_SUBMINOR_VERSION - Boost subminor version number (Z in x.y.Z)
+#   Boost_LIB_DIAGNOSTIC_DEFINITIONS (Windows)
+#                          - Pass to add_definitions() to have diagnostic
+#                            information about Boost's automatic linking
+#                            displayed during compilation
+#
+# This module reads hints about search locations from variables::
+#
+#   BOOST_ROOT             - Preferred installation prefix
+#    (or BOOSTROOT)
+#   BOOST_INCLUDEDIR       - Preferred include directory e.g. <prefix>/include
+#   BOOST_LIBRARYDIR       - Preferred library directory e.g. <prefix>/lib
+#   Boost_NO_SYSTEM_PATHS  - Set to ON to disable searching in locations not
+#                            specified by these hint variables. Default is OFF.
+#   Boost_ADDITIONAL_VERSIONS
+#                          - List of Boost versions not known to this module
+#                            (Boost install locations may contain the version)
+#
+# and saves search results persistently in CMake cache entries::
+#
+#   Boost_INCLUDE_DIR         - Directory containing Boost headers
+#   Boost_LIBRARY_DIR_RELEASE - Directory containing release Boost libraries
+#   Boost_LIBRARY_DIR_DEBUG   - Directory containing debug Boost libraries
+#   Boost_<C>_LIBRARY_DEBUG   - Component <C> library debug variant
+#   Boost_<C>_LIBRARY_RELEASE - Component <C> library release variant
+#
+# The following :prop_tgt:`IMPORTED` targets are also defined::
+#
+#   Boost::boost                  - Target for header-only dependencies
+#                                   (Boost include directory)
+#   Boost::<C>                    - Target for specific component dependency
+#                                   (shared or static library); <C> is lower-
+#                                   case
+#   Boost::diagnostic_definitions - interface target to enable diagnostic
+#                                   information about Boost's automatic linking
+#                                   during compilation (adds BOOST_LIB_DIAGNOSTIC)
+#   Boost::disable_autolinking    - interface target to disable automatic
+#                                   linking with MSVC (adds BOOST_ALL_NO_LIB)
+#   Boost::dynamic_linking        - interface target to enable dynamic linking
+#                                   linking with MSVC (adds BOOST_ALL_DYN_LINK)
+#
+# Implicit dependencies such as Boost::filesystem requiring
+# Boost::system will be automatically detected and satisfied, even
+# if system is not specified when using find_package and if
+# Boost::system is not added to target_link_libraries.  If using
+# Boost::thread, then Thread::Thread will also be added automatically.
+#
+# It is important to note that the imported targets behave differently
+# than variables created by this module: multiple calls to
+# find_package(Boost) in the same directory or sub-directories with
+# different options (e.g. static or shared) will not override the
+# values of the targets created by the first call.
+#
+# Users may set these hints or results as cache entries.  Projects
+# should not read these entries directly but instead use the above
+# result variables.  Note that some hint names start in upper-case
+# "BOOST".  One may specify these as environment variables if they are
+# not specified as CMake variables or cache entries.
+#
+# This module first searches for the Boost header files using the above
+# hint variables (excluding BOOST_LIBRARYDIR) and saves the result in
+# Boost_INCLUDE_DIR.  Then it searches for requested component libraries
+# using the above hints (excluding BOOST_INCLUDEDIR and
+# Boost_ADDITIONAL_VERSIONS), "lib" directories near Boost_INCLUDE_DIR,
+# and the library name configuration settings below.  It saves the
+# library directories in Boost_LIBRARY_DIR_DEBUG and
+# Boost_LIBRARY_DIR_RELEASE and individual library
+# locations in Boost_<C>_LIBRARY_DEBUG and Boost_<C>_LIBRARY_RELEASE.
+# When one changes settings used by previous searches in the same build
+# tree (excluding environment variables) this module discards previous
+# search results affected by the changes and searches again.
+#
+# Boost libraries come in many variants encoded in their file name.
+# Users or projects may tell this module which variant to find by
+# setting variables::
+#
+#   Boost_USE_MULTITHREADED  - Set to OFF to use the non-multithreaded
+#                              libraries ('mt' tag).  Default is ON.
+#   Boost_USE_STATIC_LIBS    - Set to ON to force the use of the static
+#                              libraries.  Default is OFF.
+#   Boost_USE_STATIC_RUNTIME - Set to ON or OFF to specify whether to use
+#                              libraries linked statically to the C++ runtime
+#                              ('s' tag).  Default is platform dependent.
+#   Boost_USE_DEBUG_RUNTIME  - Set to ON or OFF to specify whether to use
+#                              libraries linked to the MS debug C++ runtime
+#                              ('g' tag).  Default is ON.
+#   Boost_USE_DEBUG_PYTHON   - Set to ON to use libraries compiled with a
+#                              debug Python build ('y' tag). Default is OFF.
+#   Boost_USE_STLPORT        - Set to ON to use libraries compiled with
+#                              STLPort ('p' tag).  Default is OFF.
+#   Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
+#                            - Set to ON to use libraries compiled with
+#                              STLPort deprecated "native iostreams"
+#                              ('n' tag).  Default is OFF.
+#   Boost_COMPILER           - Set to the compiler-specific library suffix
+#                              (e.g. "-gcc43").  Default is auto-computed
+#                              for the C++ compiler in use.
+#   Boost_THREADAPI          - Suffix for "thread" component library name,
+#                              such as "pthread" or "win32".  Names with
+#                              and without this suffix will both be tried.
+#   Boost_NAMESPACE          - Alternate namespace used to build boost with
+#                              e.g. if set to "myboost", will search for
+#                              myboost_thread instead of boost_thread.
+#
+# Other variables one may set to control this module are::
+#
+#   Boost_DEBUG              - Set to ON to enable debug output from FindBoost.
+#                              Please enable this before filing any bug report.
+#   Boost_DETAILED_FAILURE_MSG
+#                            - Set to ON to add detailed information to the
+#                              failure message even when the REQUIRED option
+#                              is not given to the find_package call.
+#   Boost_REALPATH           - Set to ON to resolve symlinks for discovered
+#                              libraries to assist with packaging.  For example,
+#                              the "system" component library may be resolved to
+#                              "/usr/lib/libboost_system.so.1.42.0" instead of
+#                              "/usr/lib/libboost_system.so".  This does not
+#                              affect linking and should not be enabled unless
+#                              the user needs this information.
+#   Boost_LIBRARY_DIR        - Default value for Boost_LIBRARY_DIR_RELEASE and
+#                              Boost_LIBRARY_DIR_DEBUG.
+#
+# On Visual Studio and Borland compilers Boost headers request automatic
+# linking to corresponding libraries.  This requires matching libraries
+# to be linked explicitly or available in the link library search path.
+# In this case setting Boost_USE_STATIC_LIBS to OFF may not achieve
+# dynamic linking.  Boost automatic linking typically requests static
+# libraries with a few exceptions (such as Boost.Python).  Use::
+#
+#   add_definitions(${Boost_LIB_DIAGNOSTIC_DEFINITIONS})
+#
+# to ask Boost to report information about automatic linking requests.
+#
+# Example to find Boost headers only::
+#
+#   find_package(Boost 1.36.0)
+#   if(Boost_FOUND)
+#     include_directories(${Boost_INCLUDE_DIRS})
+#     add_executable(foo foo.cc)
+#   endif()
+#
+# Example to find Boost libraries and use imported targets::
+#
+#   find_package(Boost 1.56 REQUIRED COMPONENTS
+#                date_time filesystem iostreams)
+#   add_executable(foo foo.cc)
+#   target_link_libraries(foo Boost::date_time Boost::filesystem
+#                             Boost::iostreams)
+#
+# Example to find Boost headers and some *static* libraries::
+#
+#   set(Boost_USE_STATIC_LIBS        ON) # only find static libs
+#   set(Boost_USE_MULTITHREADED      ON)
+#   set(Boost_USE_STATIC_RUNTIME    OFF)
+#   find_package(Boost 1.36.0 COMPONENTS date_time filesystem system ...)
+#   if(Boost_FOUND)
+#     include_directories(${Boost_INCLUDE_DIRS})
+#     add_executable(foo foo.cc)
+#     target_link_libraries(foo ${Boost_LIBRARIES})
+#   endif()
+#
+# Boost CMake
+# ^^^^^^^^^^^
+#
+# If Boost was built using the boost-cmake project it provides a package
+# configuration file for use with find_package's Config mode.  This
+# module looks for the package configuration file called
+# BoostConfig.cmake or boost-config.cmake and stores the result in cache
+# entry "Boost_DIR".  If found, the package configuration file is loaded
+# and this module returns with no further action.  See documentation of
+# the Boost CMake package configuration for details on what it provides.
+#
+# Set Boost_NO_BOOST_CMAKE to ON to disable the search for boost-cmake.
+
+#=============================================================================
+# Copyright 2006-2012 Kitware, Inc.
+# Copyright 2006-2008 Andreas Schneider <mail@cynapses.org>
+# Copyright 2007      Wengo
+# Copyright 2007      Mike Jackson
+# Copyright 2008      Andreas Pakulat <apaku@gmx.de>
+# Copyright 2008-2012 Philip Lowman <philip@yhbt.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+#-------------------------------------------------------------------------------
+# Before we go searching, check whether boost-cmake is available, unless the
+# user specifically asked NOT to search for boost-cmake.
+#
+# If Boost_DIR is set, this behaves as any find_package call would. If not,
+# it looks at BOOST_ROOT and BOOSTROOT to find Boost.
+#
+if (NOT Boost_NO_BOOST_CMAKE)
+  # If Boost_DIR is not set, look for BOOSTROOT and BOOST_ROOT as alternatives,
+  # since these are more conventional for Boost.
+  if ("$ENV{Boost_DIR}" STREQUAL "")
+    if (NOT "$ENV{BOOST_ROOT}" STREQUAL "")
+      set(ENV{Boost_DIR} $ENV{BOOST_ROOT})
+    elseif (NOT "$ENV{BOOSTROOT}" STREQUAL "")
+      set(ENV{Boost_DIR} $ENV{BOOSTROOT})
+    endif()
+  endif()
+
+  # Do the same find_package call but look specifically for the CMake version.
+  # Note that args are passed in the Boost_FIND_xxxxx variables, so there is no
+  # need to delegate them to this find_package call.
+  find_package(Boost QUIET NO_MODULE)
+  mark_as_advanced(Boost_DIR)
+
+  # If we found boost-cmake, then we're done.  Print out what we found.
+  # Otherwise let the rest of the module try to find it.
+  if (Boost_FOUND)
+    message("Boost ${Boost_FIND_VERSION} found.")
+    if (Boost_FIND_COMPONENTS)
+      message("Found Boost components:")
+      message("   ${Boost_FIND_COMPONENTS}")
+    endif()
+    return()
+  endif()
+endif()
+
+
+#-------------------------------------------------------------------------------
+#  FindBoost functions & macros
+#
+
+############################################
+#
+# Check the existence of the libraries.
+#
+############################################
+# This macro was taken directly from the FindQt4.cmake file that is included
+# with the CMake distribution. This is NOT my work. All work was done by the
+# original authors of the FindQt4.cmake file. Only minor modifications were
+# made to remove references to Qt and make this file more generally applicable
+# And ELSE/ENDIF pairs were removed for readability.
+#########################################################################
+
+macro(_Boost_ADJUST_LIB_VARS basename)
+  if(Boost_INCLUDE_DIR )
+    if(Boost_${basename}_LIBRARY_DEBUG AND Boost_${basename}_LIBRARY_RELEASE)
+      # if the generator supports configuration types then set
+      # optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value
+      if(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
+        set(Boost_${basename}_LIBRARY optimized ${Boost_${basename}_LIBRARY_RELEASE} debug ${Boost_${basename}_LIBRARY_DEBUG})
+      else()
+        # if there are no configuration types and CMAKE_BUILD_TYPE has no value
+        # then just use the release libraries
+        set(Boost_${basename}_LIBRARY ${Boost_${basename}_LIBRARY_RELEASE} )
+      endif()
+      # FIXME: This probably should be set for both cases
+      set(Boost_${basename}_LIBRARIES optimized ${Boost_${basename}_LIBRARY_RELEASE} debug ${Boost_${basename}_LIBRARY_DEBUG})
+    endif()
+
+    # if only the release version was found, set the debug variable also to the release version
+    if(Boost_${basename}_LIBRARY_RELEASE AND NOT Boost_${basename}_LIBRARY_DEBUG)
+      set(Boost_${basename}_LIBRARY_DEBUG ${Boost_${basename}_LIBRARY_RELEASE})
+      set(Boost_${basename}_LIBRARY       ${Boost_${basename}_LIBRARY_RELEASE})
+      set(Boost_${basename}_LIBRARIES     ${Boost_${basename}_LIBRARY_RELEASE})
+    endif()
+
+    # if only the debug version was found, set the release variable also to the debug version
+    if(Boost_${basename}_LIBRARY_DEBUG AND NOT Boost_${basename}_LIBRARY_RELEASE)
+      set(Boost_${basename}_LIBRARY_RELEASE ${Boost_${basename}_LIBRARY_DEBUG})
+      set(Boost_${basename}_LIBRARY         ${Boost_${basename}_LIBRARY_DEBUG})
+      set(Boost_${basename}_LIBRARIES       ${Boost_${basename}_LIBRARY_DEBUG})
+    endif()
+
+    # If the debug & release library ends up being the same, omit the keywords
+    if(${Boost_${basename}_LIBRARY_RELEASE} STREQUAL ${Boost_${basename}_LIBRARY_DEBUG})
+      set(Boost_${basename}_LIBRARY   ${Boost_${basename}_LIBRARY_RELEASE} )
+      set(Boost_${basename}_LIBRARIES ${Boost_${basename}_LIBRARY_RELEASE} )
+    endif()
+
+    if(Boost_${basename}_LIBRARY AND Boost_${basename}_HEADER)
+      set(Boost_${basename}_FOUND ON)
+    endif()
+
+  endif()
+  # Make variables changeable to the advanced user
+  mark_as_advanced(
+      Boost_${basename}_LIBRARY_RELEASE
+      Boost_${basename}_LIBRARY_DEBUG
+  )
+endmacro()
+
+# Detect changes in used variables.
+# Compares the current variable value with the last one.
+# In short form:
+# v != v_LAST                      -> CHANGED = 1
+# v is defined, v_LAST not         -> CHANGED = 1
+# v is not defined, but v_LAST is  -> CHANGED = 1
+# otherwise                        -> CHANGED = 0
+# CHANGED is returned in variable named ${changed_var}
+macro(_Boost_CHANGE_DETECT changed_var)
+  set(${changed_var} 0)
+  foreach(v ${ARGN})
+    if(DEFINED _Boost_COMPONENTS_SEARCHED)
+      if(${v})
+        if(_${v}_LAST)
+          string(COMPARE NOTEQUAL "${${v}}" "${_${v}_LAST}" _${v}_CHANGED)
+        else()
+          set(_${v}_CHANGED 1)
+        endif()
+      elseif(_${v}_LAST)
+        set(_${v}_CHANGED 1)
+      endif()
+      if(_${v}_CHANGED)
+        set(${changed_var} 1)
+      endif()
+    else()
+      set(_${v}_CHANGED 0)
+    endif()
+  endforeach()
+endmacro()
+
+#
+# Find the given library (var).
+# Use 'build_type' to support different lib paths for RELEASE or DEBUG builds
+#
+macro(_Boost_FIND_LIBRARY var build_type)
+
+  find_library(${var} ${ARGN})
+
+  if(${var})
+    # If this is the first library found then save Boost_LIBRARY_DIR_[RELEASE,DEBUG].
+    if(NOT Boost_LIBRARY_DIR_${build_type})
+      get_filename_component(_dir "${${var}}" PATH)
+      set(Boost_LIBRARY_DIR_${build_type} "${_dir}" CACHE PATH "Boost library directory ${build_type}" FORCE)
+    endif()
+  elseif(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
+    # Try component-specific hints but do not save Boost_LIBRARY_DIR_[RELEASE,DEBUG].
+    find_library(${var} HINTS ${_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT} ${ARGN})
+  endif()
+
+  # If Boost_LIBRARY_DIR_[RELEASE,DEBUG] is known then search only there.
+  if(Boost_LIBRARY_DIR_${build_type})
+    set(_boost_LIBRARY_SEARCH_DIRS_${build_type} ${Boost_LIBRARY_DIR_${build_type}} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+    if(Boost_DEBUG)
+      message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+        " Boost_LIBRARY_DIR_${build_type} = ${Boost_LIBRARY_DIR_${build_type}}"
+        " _boost_LIBRARY_SEARCH_DIRS_${build_type} = ${_boost_LIBRARY_SEARCH_DIRS_${build_type}}")
+    endif()
+  endif()
+endmacro()
+
+#-------------------------------------------------------------------------------
+
+#
+# Runs compiler with "-dumpversion" and parses major/minor
+# version with a regex.
+#
+function(_Boost_COMPILER_DUMPVERSION _OUTPUT_VERSION)
+
+  exec_program(${CMAKE_CXX_COMPILER}
+    ARGS ${CMAKE_CXX_COMPILER_ARG1} -dumpversion
+    OUTPUT_VARIABLE _boost_COMPILER_VERSION
+  )
+  string(REGEX REPLACE "([0-9])\\.([0-9])(\\.[0-9])?" "\\1\\2"
+    _boost_COMPILER_VERSION ${_boost_COMPILER_VERSION})
+
+  set(${_OUTPUT_VERSION} ${_boost_COMPILER_VERSION} PARENT_SCOPE)
+endfunction()
+
+#
+# Take a list of libraries with "thread" in it
+# and prepend duplicates with "thread_${Boost_THREADAPI}"
+# at the front of the list
+#
+function(_Boost_PREPEND_LIST_WITH_THREADAPI _output)
+  set(_orig_libnames ${ARGN})
+  string(REPLACE "thread" "thread_${Boost_THREADAPI}" _threadapi_libnames "${_orig_libnames}")
+  set(${_output} ${_threadapi_libnames} ${_orig_libnames} PARENT_SCOPE)
+endfunction()
+
+#
+# If a library is found, replace its cache entry with its REALPATH
+#
+function(_Boost_SWAP_WITH_REALPATH _library _docstring)
+  if(${_library})
+    get_filename_component(_boost_filepathreal ${${_library}} REALPATH)
+    unset(${_library} CACHE)
+    set(${_library} ${_boost_filepathreal} CACHE FILEPATH "${_docstring}")
+  endif()
+endfunction()
+
+function(_Boost_CHECK_SPELLING _var)
+  if(${_var})
+    string(TOUPPER ${_var} _var_UC)
+    message(FATAL_ERROR "ERROR: ${_var} is not the correct spelling.  The proper spelling is ${_var_UC}.")
+  endif()
+endfunction()
+
+# Guesses Boost's compiler prefix used in built library names
+# Returns the guess by setting the variable pointed to by _ret
+function(_Boost_GUESS_COMPILER_PREFIX _ret)
+  if(CMAKE_CXX_COMPILER_ID STREQUAL "Intel"
+      OR CMAKE_CXX_COMPILER MATCHES "icl"
+      OR CMAKE_CXX_COMPILER MATCHES "icpc")
+    if(WIN32)
+      set (_boost_COMPILER "-iw")
+    else()
+      set (_boost_COMPILER "-il")
+    endif()
+  elseif (GHSMULTI)
+    set(_boost_COMPILER "-ghs")
+  elseif (MSVC14)
+    set(_boost_COMPILER "-vc140")
+  elseif (MSVC12)
+    set(_boost_COMPILER "-vc120")
+  elseif (MSVC11)
+    set(_boost_COMPILER "-vc110")
+  elseif (MSVC10)
+    set(_boost_COMPILER "-vc100")
+  elseif (MSVC90)
+    set(_boost_COMPILER "-vc90")
+  elseif (MSVC80)
+    set(_boost_COMPILER "-vc80")
+  elseif (MSVC71)
+    set(_boost_COMPILER "-vc71")
+  elseif (MSVC70) # Good luck!
+    set(_boost_COMPILER "-vc7") # yes, this is correct
+  elseif (MSVC60) # Good luck!
+    set(_boost_COMPILER "-vc6") # yes, this is correct
+  elseif (BORLAND)
+    set(_boost_COMPILER "-bcb")
+  elseif(CMAKE_CXX_COMPILER_ID STREQUAL "SunPro")
+    set(_boost_COMPILER "-sw")
+  elseif(CMAKE_CXX_COMPILER_ID STREQUAL "XL")
+    set(_boost_COMPILER "-xlc")
+  elseif (MINGW)
+    if(${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION} VERSION_LESS 1.34)
+        set(_boost_COMPILER "-mgw") # no GCC version encoding prior to 1.34
+    else()
+      _Boost_COMPILER_DUMPVERSION(_boost_COMPILER_VERSION)
+      set(_boost_COMPILER "-mgw${_boost_COMPILER_VERSION}")
+    endif()
+  elseif (UNIX)
+    if (CMAKE_COMPILER_IS_GNUCXX)
+      if(${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION} VERSION_LESS 1.34)
+        set(_boost_COMPILER "-gcc") # no GCC version encoding prior to 1.34
+      else()
+        _Boost_COMPILER_DUMPVERSION(_boost_COMPILER_VERSION)
+        # Determine which version of GCC we have.
+        if(APPLE)
+          if(Boost_MINOR_VERSION)
+            if(${Boost_MINOR_VERSION} GREATER 35)
+              # In Boost 1.36.0 and newer, the mangled compiler name used
+              # on Mac OS X/Darwin is "xgcc".
+              set(_boost_COMPILER "-xgcc${_boost_COMPILER_VERSION}")
+            else()
+              # In Boost <= 1.35.0, there is no mangled compiler name for
+              # the Mac OS X/Darwin version of GCC.
+              set(_boost_COMPILER "")
+            endif()
+          else()
+            # We don't know the Boost version, so assume it's
+            # pre-1.36.0.
+            set(_boost_COMPILER "")
+          endif()
+        else()
+          set(_boost_COMPILER "-gcc${_boost_COMPILER_VERSION}")
+        endif()
+      endif()
+    endif ()
+  else()
+    # TODO at least Boost_DEBUG here?
+    set(_boost_COMPILER "")
+  endif()
+  set(${_ret} ${_boost_COMPILER} PARENT_SCOPE)
+endfunction()
+
+#
+# Get component dependencies.  Requires the dependencies to have been
+# defined for the Boost release version.
+#
+# component - the component to check
+# _ret - list of library dependencies
+#
+function(_Boost_COMPONENT_DEPENDENCIES component _ret)
+  # Note: to add a new Boost release, run
+  #
+  #   % cmake -DBOOST_DIR=/path/to/boost/source -P Utilities/Scripts/BoostScanDeps.cmake
+  #
+  # The output may be added in a new block below.  If it's the same as
+  # the previous release, simply update the version range of the block
+  # for the previous release.  Also check if any new components have
+  # been added, and add any new components to
+  # _Boost_COMPONENT_HEADERS.
+  #
+  # This information was originally generated by running
+  # BoostScanDeps.cmake against every boost release to date supported
+  # by FindBoost:
+  #
+  #   % for version in /path/to/boost/sources/*
+  #     do
+  #       cmake -DBOOST_DIR=$version -P Utilities/Scripts/BoostScanDeps.cmake
+  #     done
+  #
+  # The output was then updated by search and replace with these regexes:
+  #
+  # - Strip message(STATUS) prefix dashes
+  #   s;^-- ;;
+  # - Indent
+  #   s;^set(;    set(;;
+  # - Add conditionals
+  #   s;Scanning /path/to/boost/sources/boost_\(.*\)_\(.*\)_\(.*);  elseif(NOT Boost_VERSION VERSION_LESS \10\20\3 AND Boost_VERSION VERSION_LESS xxxx);
+  #
+  # This results in the logic seen below, but will require the xxxx
+  # replacing with the following Boost release version (or the next
+  # minor version to be released, e.g. 1.59 was the latest at the time
+  # of writing, making 1.60 the next, so 106000 is the needed version
+  # number).  Identical consecutive releases were then merged together
+  # by updating the end range of the first block and removing the
+  # following redundant blocks.
+  #
+  # Running the script against all historical releases should be
+  # required only if the BoostScanDeps.cmake script logic is changed.
+  # The addition of a new release should only require it to be run
+  # against the new release.
+  set(_Boost_IMPORTED_TARGETS TRUE)
+  if(NOT Boost_VERSION VERSION_LESS 103300 AND Boost_VERSION VERSION_LESS 103500)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex thread)
+    set(_Boost_REGEX_DEPENDENCIES thread)
+    set(_Boost_WAVE_DEPENDENCIES filesystem thread)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 103500 AND Boost_VERSION VERSION_LESS 103600)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system thread)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 103600 AND Boost_VERSION VERSION_LESS 103800)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system thread)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 103800 AND Boost_VERSION VERSION_LESS 104300)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES date_time)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system thread date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 104300 AND Boost_VERSION VERSION_LESS 104400)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES date_time)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system thread date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 104400 AND Boost_VERSION VERSION_LESS 104500)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l random serialization)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES date_time)
+    set(_Boost_WAVE_DEPENDENCIES serialization filesystem system thread date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 104500 AND Boost_VERSION VERSION_LESS 104700)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES date_time)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 104700 AND Boost_VERSION VERSION_LESS 104800)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES date_time)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 104800 AND Boost_VERSION VERSION_LESS 105000)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES date_time)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 105000 AND Boost_VERSION VERSION_LESS 105300)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l regex random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 105300 AND Boost_VERSION VERSION_LESS 105400)
+    set(_Boost_ATOMIC_DEPENDENCIES thread chrono system date_time)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l regex random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time atomic)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 105400 AND Boost_VERSION VERSION_LESS 105500)
+    set(_Boost_ATOMIC_DEPENDENCIES thread chrono system date_time)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_LOG_DEPENDENCIES log_setup date_time system filesystem thread regex chrono)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l regex random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time atomic)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time atomic)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 105500 AND Boost_VERSION VERSION_LESS 105600)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_COROUTINE_DEPENDENCIES context system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_LOG_DEPENDENCIES log_setup date_time system filesystem thread regex chrono)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l regex random)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time atomic)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time atomic)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 105600 AND Boost_VERSION VERSION_LESS 105900)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_COROUTINE_DEPENDENCIES context system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_LOG_DEPENDENCIES log_setup date_time system filesystem thread regex chrono)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l atomic)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_RANDOM_DEPENDENCIES system)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time atomic)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time atomic)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 105900 AND Boost_VERSION VERSION_LESS 106000)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_COROUTINE_DEPENDENCIES context system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_LOG_DEPENDENCIES log_setup date_time system filesystem thread regex chrono atomic)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l atomic)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_RANDOM_DEPENDENCIES system)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time atomic)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time atomic)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 106000 AND Boost_VERSION VERSION_LESS 106100)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_COROUTINE_DEPENDENCIES context system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_LOG_DEPENDENCIES date_time log_setup system filesystem thread regex chrono atomic)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l atomic)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_RANDOM_DEPENDENCIES system)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time atomic)
+    set(_Boost_TIMER_DEPENDENCIES chrono system)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time atomic)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  elseif(NOT Boost_VERSION VERSION_LESS 106100 AND Boost_VERSION VERSION_LESS 106200)
+    set(_Boost_CHRONO_DEPENDENCIES system)
+    set(_Boost_CONTEXT_DEPENDENCIES thread chrono system date_time)
+    set(_Boost_COROUTINE_DEPENDENCIES context system)
+    set(_Boost_FILESYSTEM_DEPENDENCIES system)
+    set(_Boost_IOSTREAMS_DEPENDENCIES regex)
+    set(_Boost_LOG_DEPENDENCIES date_time log_setup system filesystem thread regex chrono atomic)
+    set(_Boost_MATH_DEPENDENCIES math_c99 math_c99f math_c99l math_tr1 math_tr1f math_tr1l atomic)
+    set(_Boost_MPI_DEPENDENCIES serialization)
+    set(_Boost_MPI_PYTHON_DEPENDENCIES python mpi serialization)
+    set(_Boost_RANDOM_DEPENDENCIES system)
+    set(_Boost_THREAD_DEPENDENCIES chrono system date_time atomic)
+    set(_Boost_WAVE_DEPENDENCIES filesystem system serialization thread chrono date_time atomic)
+    set(_Boost_WSERIALIZATION_DEPENDENCIES serialization)
+  else()
+    message(WARNING "Imported targets not available for Boost version ${Boost_VERSION}")
+    set(_Boost_IMPORTED_TARGETS FALSE)
+  endif()
+
+  string(TOUPPER ${component} uppercomponent)
+  set(${_ret} ${_Boost_${uppercomponent}_DEPENDENCIES} PARENT_SCOPE)
+  set(_Boost_IMPORTED_TARGETS ${_Boost_IMPORTED_TARGETS} PARENT_SCOPE)
+
+  string(REGEX REPLACE ";" " " _boost_DEPS_STRING "${_Boost_${uppercomponent}_DEPENDENCIES}")
+  if (NOT _boost_DEPS_STRING)
+    set(_boost_DEPS_STRING "(none)")
+  endif()
+  # message(STATUS "Dependencies for Boost::${component}: ${_boost_DEPS_STRING}")
+endfunction()
+
+#
+# Get component headers.  This is the primary header (or headers) for
+# a given component, and is used to check that the headers are present
+# as well as the library itself as an extra sanity check of the build
+# environment.
+#
+# component - the component to check
+# _hdrs
+#
+function(_Boost_COMPONENT_HEADERS component _hdrs)
+  # Note: new boost components will require adding here.  The header
+  # must be present in all versions of Boost providing a library.
+  set(_Boost_ATOMIC_HEADERS              "boost/atomic.hpp")
+  set(_Boost_CHRONO_HEADERS              "boost/chrono.hpp")
+  set(_Boost_CONTAINER_HEADERS           "boost/container/container_fwd.hpp")
+  set(_Boost_CONTEXT_HEADERS             "boost/context/all.hpp")
+  set(_Boost_COROUTINE_HEADERS           "boost/coroutine/all.hpp")
+  set(_Boost_EXCEPTION_HEADERS           "boost/exception/exception.hpp")
+  set(_Boost_DATE_TIME_HEADERS           "boost/date_time/date.hpp")
+  set(_Boost_FILESYSTEM_HEADERS          "boost/filesystem/path.hpp")
+  set(_Boost_GRAPH_HEADERS               "boost/graph/adjacency_list.hpp")
+  set(_Boost_GRAPH_PARALLEL_HEADERS      "boost/graph/adjacency_list.hpp")
+  set(_Boost_IOSTREAMS_HEADERS           "boost/iostreams/stream.hpp")
+  set(_Boost_LOCALE_HEADERS              "boost/locale.hpp")
+  set(_Boost_LOG_HEADERS                 "boost/log/core.hpp")
+  set(_Boost_LOG_SETUP_HEADERS           "boost/log/detail/setup_config.hpp")
+  set(_Boost_MATH_HEADERS                "boost/math_fwd.hpp")
+  set(_Boost_MATH_C99_HEADERS            "boost/math/tr1.hpp")
+  set(_Boost_MATH_C99F_HEADERS           "boost/math/tr1.hpp")
+  set(_Boost_MATH_C99L_HEADERS           "boost/math/tr1.hpp")
+  set(_Boost_MATH_TR1_HEADERS            "boost/math/tr1.hpp")
+  set(_Boost_MATH_TR1F_HEADERS           "boost/math/tr1.hpp")
+  set(_Boost_MATH_TR1L_HEADERS           "boost/math/tr1.hpp")
+  set(_Boost_MPI_HEADERS                 "boost/mpi.hpp")
+  set(_Boost_MPI_PYTHON_HEADERS          "boost/mpi/python/config.hpp")
+  set(_Boost_PRG_EXEC_MONITOR_HEADERS    "boost/test/prg_exec_monitor.hpp")
+  set(_Boost_PROGRAM_OPTIONS_HEADERS     "boost/program_options.hpp")
+  set(_Boost_PYTHON_HEADERS              "boost/python.hpp")
+  set(_Boost_RANDOM_HEADERS              "boost/random.hpp")
+  set(_Boost_REGEX_HEADERS               "boost/regex.hpp")
+  set(_Boost_SERIALIZATION_HEADERS       "boost/serialization/serialization.hpp")
+  set(_Boost_SIGNALS_HEADERS             "boost/signals.hpp")
+  set(_Boost_SYSTEM_HEADERS              "boost/system/config.hpp")
+  set(_Boost_TEST_EXEC_MONITOR_HEADERS   "boost/test/test_exec_monitor.hpp")
+  set(_Boost_THREAD_HEADERS              "boost/thread.hpp")
+  set(_Boost_TIMER_HEADERS               "boost/timer.hpp")
+  set(_Boost_TYPE_ERASURE_HEADERS        "boost/type_erasure/config.hpp")
+  set(_Boost_UNIT_TEST_FRAMEWORK_HEADERS "boost/test/framework.hpp")
+  set(_Boost_WAVE_HEADERS                "boost/wave.hpp")
+  set(_Boost_WSERIALIZATION_HEADERS      "boost/archive/text_wiarchive.hpp")
+
+  string(TOUPPER ${component} uppercomponent)
+  set(${_hdrs} ${_Boost_${uppercomponent}_HEADERS} PARENT_SCOPE)
+
+  string(REGEX REPLACE ";" " " _boost_HDRS_STRING "${_Boost_${uppercomponent}_HEADERS}")
+  if (NOT _boost_HDRS_STRING)
+    set(_boost_HDRS_STRING "(none)")
+  endif()
+  # message(STATUS "Headers for Boost::${component}: ${_boost_HDRS_STRING}")
+endfunction()
+
+#
+# Determine if any missing dependencies require adding to the component list.
+#
+# Sets _Boost_${COMPONENT}_DEPENDENCIES for each required component,
+# plus _Boost_IMPORTED_TARGETS (TRUE if imported targets should be
+# defined; FALSE if dependency information is unavailable).
+#
+# componentvar - the component list variable name
+# extravar - the indirect dependency list variable name
+#
+#
+function(_Boost_MISSING_DEPENDENCIES componentvar extravar)
+  # _boost_unprocessed_components - list of components requiring processing
+  # _boost_processed_components - components already processed (or currently being processed)
+  # _boost_new_components - new components discovered for future processing
+  #
+  list(APPEND _boost_unprocessed_components ${${componentvar}})
+
+  while(_boost_unprocessed_components)
+    list(APPEND _boost_processed_components ${_boost_unprocessed_components})
+    foreach(component ${_boost_unprocessed_components})
+      string(TOUPPER ${component} uppercomponent)
+  set(${_ret} ${_Boost_${uppercomponent}_DEPENDENCIES} PARENT_SCOPE)
+      _Boost_COMPONENT_DEPENDENCIES("${component}" _Boost_${uppercomponent}_DEPENDENCIES)
+      set(_Boost_${uppercomponent}_DEPENDENCIES ${_Boost_${uppercomponent}_DEPENDENCIES} PARENT_SCOPE)
+      set(_Boost_IMPORTED_TARGETS ${_Boost_IMPORTED_TARGETS} PARENT_SCOPE)
+      foreach(componentdep ${_Boost_${uppercomponent}_DEPENDENCIES})
+        list(FIND _boost_processed_components "${componentdep}" _boost_component_found)
+        list(FIND _boost_new_components "${componentdep}" _boost_component_new)
+        if (_boost_component_found EQUAL -1 AND _boost_component_new EQUAL -1)
+          list(APPEND _boost_new_components ${componentdep})
+        endif()
+      endforeach()
+    endforeach()
+    set(_boost_unprocessed_components ${_boost_new_components})
+    unset(_boost_new_components)
+  endwhile()
+  set(_boost_extra_components ${_boost_processed_components})
+  if(_boost_extra_components AND ${componentvar})
+    list(REMOVE_ITEM _boost_extra_components ${${componentvar}})
+  endif()
+  set(${componentvar} ${_boost_processed_components} PARENT_SCOPE)
+  set(${extravar} ${_boost_extra_components} PARENT_SCOPE)
+endfunction()
+
+#
+# End functions/macros
+#
+#-------------------------------------------------------------------------------
+
+#-------------------------------------------------------------------------------
+# main.
+#-------------------------------------------------------------------------------
+
+
+# If the user sets Boost_LIBRARY_DIR, use it as the default for both
+# configurations.
+if(NOT Boost_LIBRARY_DIR_RELEASE AND Boost_LIBRARY_DIR)
+  set(Boost_LIBRARY_DIR_RELEASE "${Boost_LIBRARY_DIR}")
+endif()
+if(NOT Boost_LIBRARY_DIR_DEBUG AND Boost_LIBRARY_DIR)
+  set(Boost_LIBRARY_DIR_DEBUG   "${Boost_LIBRARY_DIR}")
+endif()
+
+if(NOT DEFINED Boost_USE_MULTITHREADED)
+    set(Boost_USE_MULTITHREADED TRUE)
+endif()
+if(NOT DEFINED Boost_USE_DEBUG_RUNTIME)
+  set(Boost_USE_DEBUG_RUNTIME TRUE)
+endif()
+
+# Check the version of Boost against the requested version.
+if(Boost_FIND_VERSION AND NOT Boost_FIND_VERSION_MINOR)
+  message(SEND_ERROR "When requesting a specific version of Boost, you must provide at least the major and minor version numbers, e.g., 1.34")
+endif()
+
+if(Boost_FIND_VERSION_EXACT)
+  # The version may appear in a directory with or without the patch
+  # level, even when the patch level is non-zero.
+  set(_boost_TEST_VERSIONS
+    "${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}.${Boost_FIND_VERSION_PATCH}"
+    "${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
+else()
+  # The user has not requested an exact version.  Among known
+  # versions, find those that are acceptable to the user request.
+  #
+  # Note: When adding a new Boost release, also update the dependency
+  # information in _Boost_COMPONENT_DEPENDENCIES and
+  # _Boost_COMPONENT_HEADERS.  See the instructions at the top of
+  # _Boost_COMPONENT_DEPENDENCIES.
+  set(_Boost_KNOWN_VERSIONS ${Boost_ADDITIONAL_VERSIONS}
+    "1.61.0" "1.61" "1.60.0" "1.60"
+    "1.59.0" "1.59" "1.58.0" "1.58" "1.57.0" "1.57" "1.56.0" "1.56" "1.55.0" "1.55"
+    "1.54.0" "1.54" "1.53.0" "1.53" "1.52.0" "1.52" "1.51.0" "1.51"
+    "1.50.0" "1.50" "1.49.0" "1.49" "1.48.0" "1.48" "1.47.0" "1.47" "1.46.1"
+    "1.46.0" "1.46" "1.45.0" "1.45" "1.44.0" "1.44" "1.43.0" "1.43" "1.42.0" "1.42"
+    "1.41.0" "1.41" "1.40.0" "1.40" "1.39.0" "1.39" "1.38.0" "1.38" "1.37.0" "1.37"
+    "1.36.1" "1.36.0" "1.36" "1.35.1" "1.35.0" "1.35" "1.34.1" "1.34.0"
+    "1.34" "1.33.1" "1.33.0" "1.33")
+
+  set(_boost_TEST_VERSIONS)
+  if(Boost_FIND_VERSION)
+    set(_Boost_FIND_VERSION_SHORT "${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
+    # Select acceptable versions.
+    foreach(version ${_Boost_KNOWN_VERSIONS})
+      if(NOT "${version}" VERSION_LESS "${Boost_FIND_VERSION}")
+        # This version is high enough.
+        list(APPEND _boost_TEST_VERSIONS "${version}")
+      elseif("${version}.99" VERSION_EQUAL "${_Boost_FIND_VERSION_SHORT}.99")
+        # This version is a short-form for the requested version with
+        # the patch level dropped.
+        list(APPEND _boost_TEST_VERSIONS "${version}")
+      endif()
+    endforeach()
+  else()
+    # Any version is acceptable.
+    set(_boost_TEST_VERSIONS "${_Boost_KNOWN_VERSIONS}")
+  endif()
+endif()
+
+# The reason that we failed to find Boost. This will be set to a
+# user-friendly message when we fail to find some necessary piece of
+# Boost.
+set(Boost_ERROR_REASON)
+
+if(Boost_DEBUG)
+  # Output some of their choices
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "_boost_TEST_VERSIONS = ${_boost_TEST_VERSIONS}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "Boost_USE_MULTITHREADED = ${Boost_USE_MULTITHREADED}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "Boost_USE_STATIC_LIBS = ${Boost_USE_STATIC_LIBS}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "Boost_USE_STATIC_RUNTIME = ${Boost_USE_STATIC_RUNTIME}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "Boost_ADDITIONAL_VERSIONS = ${Boost_ADDITIONAL_VERSIONS}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "Boost_NO_SYSTEM_PATHS = ${Boost_NO_SYSTEM_PATHS}")
+endif()
+
+# Supply Boost_LIB_DIAGNOSTIC_DEFINITIONS as a convenience target. It
+# will only contain any interface definitions on WIN32, but is created
+# on all platforms to keep end user code free from platform dependent
+# code.  Also provide convenience targets to disable autolinking and
+# enable dynamic linking.
+if(NOT TARGET Boost::diagnostic_definitions)
+  add_library(Boost::diagnostic_definitions INTERFACE IMPORTED)
+  add_library(Boost::disable_autolinking INTERFACE IMPORTED)
+  add_library(Boost::dynamic_linking INTERFACE IMPORTED)
+endif()
+if(WIN32)
+  # In windows, automatic linking is performed, so you do not have
+  # to specify the libraries.  If you are linking to a dynamic
+  # runtime, then you can choose to link to either a static or a
+  # dynamic Boost library, the default is to do a static link.  You
+  # can alter this for a specific library "whatever" by defining
+  # BOOST_WHATEVER_DYN_LINK to force Boost library "whatever" to be
+  # linked dynamically.  Alternatively you can force all Boost
+  # libraries to dynamic link by defining BOOST_ALL_DYN_LINK.
+
+  # This feature can be disabled for Boost library "whatever" by
+  # defining BOOST_WHATEVER_NO_LIB, or for all of Boost by defining
+  # BOOST_ALL_NO_LIB.
+
+  # If you want to observe which libraries are being linked against
+  # then defining BOOST_LIB_DIAGNOSTIC will cause the auto-linking
+  # code to emit a #pragma message each time a library is selected
+  # for linking.
+  set(Boost_LIB_DIAGNOSTIC_DEFINITIONS "-DBOOST_LIB_DIAGNOSTIC")
+  set_target_properties(Boost::diagnostic_definitions PROPERTIES
+    INTERFACE_COMPILE_DEFINITIONS "BOOST_LIB_DIAGNOSTIC")
+  set_target_properties(Boost::disable_autolinking PROPERTIES
+    INTERFACE_COMPILE_DEFINITIONS "BOOST_ALL_NO_LIB")
+  set_target_properties(Boost::dynamic_linking PROPERTIES
+    INTERFACE_COMPILE_DEFINITIONS "BOOST_ALL_DYN_LINK")
+endif()
+
+_Boost_CHECK_SPELLING(Boost_ROOT)
+_Boost_CHECK_SPELLING(Boost_LIBRARYDIR)
+_Boost_CHECK_SPELLING(Boost_INCLUDEDIR)
+
+# Collect environment variable inputs as hints.  Do not consider changes.
+foreach(v BOOSTROOT BOOST_ROOT BOOST_INCLUDEDIR BOOST_LIBRARYDIR)
+  set(_env $ENV{${v}})
+  if(_env)
+    file(TO_CMAKE_PATH "${_env}" _ENV_${v})
+  else()
+    set(_ENV_${v} "")
+  endif()
+endforeach()
+if(NOT _ENV_BOOST_ROOT AND _ENV_BOOSTROOT)
+  set(_ENV_BOOST_ROOT "${_ENV_BOOSTROOT}")
+endif()
+
+# Collect inputs and cached results.  Detect changes since the last run.
+if(NOT BOOST_ROOT AND BOOSTROOT)
+  set(BOOST_ROOT "${BOOSTROOT}")
+endif()
+set(_Boost_VARS_DIR
+  BOOST_ROOT
+  Boost_NO_SYSTEM_PATHS
+  )
+
+if(Boost_DEBUG)
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "Declared as CMake or Environmental Variables:")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "  BOOST_ROOT = ${BOOST_ROOT}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "  BOOST_INCLUDEDIR = ${BOOST_INCLUDEDIR}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "  BOOST_LIBRARYDIR = ${BOOST_LIBRARYDIR}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                 "_boost_TEST_VERSIONS = ${_boost_TEST_VERSIONS}")
+endif()
+
+# ------------------------------------------------------------------------
+#  Search for Boost include DIR
+# ------------------------------------------------------------------------
+
+set(_Boost_VARS_INC BOOST_INCLUDEDIR Boost_INCLUDE_DIR Boost_ADDITIONAL_VERSIONS)
+_Boost_CHANGE_DETECT(_Boost_CHANGE_INCDIR ${_Boost_VARS_DIR} ${_Boost_VARS_INC})
+# Clear Boost_INCLUDE_DIR if it did not change but other input affecting the
+# location did.  We will find a new one based on the new inputs.
+if(_Boost_CHANGE_INCDIR AND NOT _Boost_INCLUDE_DIR_CHANGED)
+  unset(Boost_INCLUDE_DIR CACHE)
+endif()
+
+if(NOT Boost_INCLUDE_DIR)
+  set(_boost_INCLUDE_SEARCH_DIRS "")
+  if(BOOST_INCLUDEDIR)
+    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${BOOST_INCLUDEDIR})
+  elseif(_ENV_BOOST_INCLUDEDIR)
+    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${_ENV_BOOST_INCLUDEDIR})
+  endif()
+
+  if( BOOST_ROOT )
+    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${BOOST_ROOT}/include ${BOOST_ROOT})
+  elseif( _ENV_BOOST_ROOT )
+    list(APPEND _boost_INCLUDE_SEARCH_DIRS ${_ENV_BOOST_ROOT}/include ${_ENV_BOOST_ROOT})
+  endif()
+
+  if( Boost_NO_SYSTEM_PATHS)
+    list(APPEND _boost_INCLUDE_SEARCH_DIRS NO_CMAKE_SYSTEM_PATH NO_SYSTEM_ENVIRONMENT_PATH)
+  else()
+    list(APPEND _boost_INCLUDE_SEARCH_DIRS PATHS
+      C:/boost/include
+      C:/boost
+      /sw/local/include
+      )
+  endif()
+
+  # Try to find Boost by stepping backwards through the Boost versions
+  # we know about.
+  # Build a list of path suffixes for each version.
+  set(_boost_PATH_SUFFIXES)
+  foreach(_boost_VER ${_boost_TEST_VERSIONS})
+    # Add in a path suffix, based on the required version, ideally
+    # we could read this from version.hpp, but for that to work we'd
+    # need to know the include dir already
+    set(_boost_BOOSTIFIED_VERSION)
+
+    # Transform 1.35 => 1_35 and 1.36.0 => 1_36_0
+    if(_boost_VER MATCHES "([0-9]+)\\.([0-9]+)\\.([0-9]+)")
+        set(_boost_BOOSTIFIED_VERSION
+          "${CMAKE_MATCH_1}_${CMAKE_MATCH_2}_${CMAKE_MATCH_3}")
+    elseif(_boost_VER MATCHES "([0-9]+)\\.([0-9]+)")
+        set(_boost_BOOSTIFIED_VERSION
+          "${CMAKE_MATCH_1}_${CMAKE_MATCH_2}")
+    endif()
+
+    list(APPEND _boost_PATH_SUFFIXES
+      "boost-${_boost_BOOSTIFIED_VERSION}"
+      "boost_${_boost_BOOSTIFIED_VERSION}"
+      "boost/boost-${_boost_BOOSTIFIED_VERSION}"
+      "boost/boost_${_boost_BOOSTIFIED_VERSION}"
+      )
+
+  endforeach()
+
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "Include debugging info:")
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "  _boost_INCLUDE_SEARCH_DIRS = ${_boost_INCLUDE_SEARCH_DIRS}")
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "  _boost_PATH_SUFFIXES = ${_boost_PATH_SUFFIXES}")
+  endif()
+
+  # Look for a standard boost header file.
+  find_path(Boost_INCLUDE_DIR
+    NAMES         boost/config.hpp
+    HINTS         ${_boost_INCLUDE_SEARCH_DIRS}
+    PATH_SUFFIXES ${_boost_PATH_SUFFIXES}
+    )
+endif()
+
+# ------------------------------------------------------------------------
+#  Extract version information from version.hpp
+# ------------------------------------------------------------------------
+
+# Set Boost_FOUND based only on header location and version.
+# It will be updated below for component libraries.
+if(Boost_INCLUDE_DIR)
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "location of version.hpp: ${Boost_INCLUDE_DIR}/boost/version.hpp")
+  endif()
+
+  # Extract Boost_VERSION and Boost_LIB_VERSION from version.hpp
+  set(Boost_VERSION 0)
+  set(Boost_LIB_VERSION "")
+  file(STRINGS "${Boost_INCLUDE_DIR}/boost/version.hpp" _boost_VERSION_HPP_CONTENTS REGEX "#define BOOST_(LIB_)?VERSION ")
+  set(_Boost_VERSION_REGEX "([0-9]+)")
+  set(_Boost_LIB_VERSION_REGEX "\"([0-9_]+)\"")
+  foreach(v VERSION LIB_VERSION)
+    if("${_boost_VERSION_HPP_CONTENTS}" MATCHES "#define BOOST_${v} ${_Boost_${v}_REGEX}")
+      set(Boost_${v} "${CMAKE_MATCH_1}")
+    endif()
+  endforeach()
+  unset(_boost_VERSION_HPP_CONTENTS)
+
+  math(EXPR Boost_MAJOR_VERSION "${Boost_VERSION} / 100000")
+  math(EXPR Boost_MINOR_VERSION "${Boost_VERSION} / 100 % 1000")
+  math(EXPR Boost_SUBMINOR_VERSION "${Boost_VERSION} % 100")
+
+  set(Boost_ERROR_REASON
+    "${Boost_ERROR_REASON}Boost version: ${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}\nBoost include path: ${Boost_INCLUDE_DIR}")
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "version.hpp reveals boost "
+                   "${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
+  endif()
+
+  if(Boost_FIND_VERSION)
+    # Set Boost_FOUND based on requested version.
+    set(_Boost_VERSION "${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
+    if("${_Boost_VERSION}" VERSION_LESS "${Boost_FIND_VERSION}")
+      set(Boost_FOUND 0)
+      set(_Boost_VERSION_AGE "old")
+    elseif(Boost_FIND_VERSION_EXACT AND
+        NOT "${_Boost_VERSION}" VERSION_EQUAL "${Boost_FIND_VERSION}")
+      set(Boost_FOUND 0)
+      set(_Boost_VERSION_AGE "new")
+    else()
+      set(Boost_FOUND 1)
+    endif()
+    if(NOT Boost_FOUND)
+      # State that we found a version of Boost that is too new or too old.
+      set(Boost_ERROR_REASON
+        "${Boost_ERROR_REASON}\nDetected version of Boost is too ${_Boost_VERSION_AGE}. Requested version was ${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
+      if (Boost_FIND_VERSION_PATCH)
+        set(Boost_ERROR_REASON
+          "${Boost_ERROR_REASON}.${Boost_FIND_VERSION_PATCH}")
+      endif ()
+      if (NOT Boost_FIND_VERSION_EXACT)
+        set(Boost_ERROR_REASON "${Boost_ERROR_REASON} (or newer)")
+      endif ()
+      set(Boost_ERROR_REASON "${Boost_ERROR_REASON}.")
+    endif ()
+  else()
+    # Caller will accept any Boost version.
+    set(Boost_FOUND 1)
+  endif()
+else()
+  set(Boost_FOUND 0)
+  set(Boost_ERROR_REASON
+    "${Boost_ERROR_REASON}Unable to find the Boost header files. Please set BOOST_ROOT to the root directory containing Boost or BOOST_INCLUDEDIR to the directory containing Boost's headers.")
+endif()
+
+# ------------------------------------------------------------------------
+#  Prefix initialization
+# ------------------------------------------------------------------------
+
+set(Boost_LIB_PREFIX "")
+if ( (GHSMULTI AND Boost_USE_STATIC_LIBS) OR
+    (WIN32 AND Boost_USE_STATIC_LIBS AND NOT CYGWIN) )
+  set(Boost_LIB_PREFIX "lib")
+endif()
+
+if ( NOT Boost_NAMESPACE )
+  set(Boost_NAMESPACE "boost")
+endif()
+
+# ------------------------------------------------------------------------
+#  Suffix initialization and compiler suffix detection.
+# ------------------------------------------------------------------------
+
+set(_Boost_VARS_NAME
+  Boost_NAMESPACE
+  Boost_COMPILER
+  Boost_THREADAPI
+  Boost_USE_DEBUG_PYTHON
+  Boost_USE_MULTITHREADED
+  Boost_USE_STATIC_LIBS
+  Boost_USE_STATIC_RUNTIME
+  Boost_USE_STLPORT
+  Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
+  )
+_Boost_CHANGE_DETECT(_Boost_CHANGE_LIBNAME ${_Boost_VARS_NAME})
+
+# Setting some more suffixes for the library
+if (Boost_COMPILER)
+  set(_boost_COMPILER ${Boost_COMPILER})
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "using user-specified Boost_COMPILER = ${_boost_COMPILER}")
+  endif()
+else()
+  # Attempt to guess the compiler suffix
+  # NOTE: this is not perfect yet, if you experience any issues
+  # please report them and use the Boost_COMPILER variable
+  # to work around the problems.
+  _Boost_GUESS_COMPILER_PREFIX(_boost_COMPILER)
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+      "guessed _boost_COMPILER = ${_boost_COMPILER}")
+  endif()
+endif()
+
+set (_boost_MULTITHREADED "-mt")
+if( NOT Boost_USE_MULTITHREADED )
+  set (_boost_MULTITHREADED "")
+endif()
+if(Boost_DEBUG)
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+    "_boost_MULTITHREADED = ${_boost_MULTITHREADED}")
+endif()
+
+#======================
+# Systematically build up the Boost ABI tag
+# http://boost.org/doc/libs/1_41_0/more/getting_started/windows.html#library-naming
+set( _boost_RELEASE_ABI_TAG "-")
+set( _boost_DEBUG_ABI_TAG   "-")
+# Key       Use this library when:
+#  s        linking statically to the C++ standard library and
+#           compiler runtime support libraries.
+if(Boost_USE_STATIC_RUNTIME)
+  set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}s")
+  set( _boost_DEBUG_ABI_TAG   "${_boost_DEBUG_ABI_TAG}s")
+endif()
+#  g        using debug versions of the standard and runtime
+#           support libraries
+if(WIN32 AND Boost_USE_DEBUG_RUNTIME)
+  if(MSVC OR "${CMAKE_CXX_COMPILER}" MATCHES "icl"
+          OR "${CMAKE_CXX_COMPILER}" MATCHES "icpc")
+    set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}g")
+  endif()
+endif()
+#  y        using special debug build of python
+if(Boost_USE_DEBUG_PYTHON)
+  set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}y")
+endif()
+#  d        using a debug version of your code
+set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}d")
+#  p        using the STLport standard library rather than the
+#           default one supplied with your compiler
+if(Boost_USE_STLPORT)
+  set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}p")
+  set( _boost_DEBUG_ABI_TAG   "${_boost_DEBUG_ABI_TAG}p")
+endif()
+#  n        using the STLport deprecated "native iostreams" feature
+if(Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS)
+  set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}n")
+  set( _boost_DEBUG_ABI_TAG   "${_boost_DEBUG_ABI_TAG}n")
+endif()
+
+if(Boost_DEBUG)
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+    "_boost_RELEASE_ABI_TAG = ${_boost_RELEASE_ABI_TAG}")
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+    "_boost_DEBUG_ABI_TAG = ${_boost_DEBUG_ABI_TAG}")
+endif()
+
+# ------------------------------------------------------------------------
+#  Begin finding boost libraries
+# ------------------------------------------------------------------------
+
+set(_Boost_VARS_LIB "")
+foreach(c DEBUG RELEASE)
+  set(_Boost_VARS_LIB_${c} BOOST_LIBRARYDIR Boost_LIBRARY_DIR_${c})
+  list(APPEND _Boost_VARS_LIB ${_Boost_VARS_LIB_${c}})
+  _Boost_CHANGE_DETECT(_Boost_CHANGE_LIBDIR_${c} ${_Boost_VARS_DIR} ${_Boost_VARS_LIB_${c}} Boost_INCLUDE_DIR)
+  # Clear Boost_LIBRARY_DIR_${c} if it did not change but other input affecting the
+  # location did.  We will find a new one based on the new inputs.
+  if(_Boost_CHANGE_LIBDIR_${c} AND NOT _Boost_LIBRARY_DIR_${c}_CHANGED)
+    unset(Boost_LIBRARY_DIR_${c} CACHE)
+  endif()
+
+  # If Boost_LIBRARY_DIR_[RELEASE,DEBUG] is set, prefer its value.
+  if(Boost_LIBRARY_DIR_${c})
+    set(_boost_LIBRARY_SEARCH_DIRS_${c} ${Boost_LIBRARY_DIR_${c}} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
+  else()
+    set(_boost_LIBRARY_SEARCH_DIRS_${c} "")
+    if(BOOST_LIBRARYDIR)
+      list(APPEND _boost_LIBRARY_SEARCH_DIRS_${c} ${BOOST_LIBRARYDIR})
+    elseif(_ENV_BOOST_LIBRARYDIR)
+      list(APPEND _boost_LIBRARY_SEARCH_DIRS_${c} ${_ENV_BOOST_LIBRARYDIR})
+    endif()
+
+    if(BOOST_ROOT)
+      list(APPEND _boost_LIBRARY_SEARCH_DIRS_${c} ${BOOST_ROOT}/lib ${BOOST_ROOT}/stage/lib)
+    elseif(_ENV_BOOST_ROOT)
+      list(APPEND _boost_LIBRARY_SEARCH_DIRS_${c} ${_ENV_BOOST_ROOT}/lib ${_ENV_BOOST_ROOT}/stage/lib)
+    endif()
+
+    list(APPEND _boost_LIBRARY_SEARCH_DIRS_${c}
+      ${Boost_INCLUDE_DIR}/lib
+      ${Boost_INCLUDE_DIR}/../lib
+      ${Boost_INCLUDE_DIR}/stage/lib
+      )
+    if( Boost_NO_SYSTEM_PATHS )
+      list(APPEND _boost_LIBRARY_SEARCH_DIRS_${c} NO_CMAKE_SYSTEM_PATH NO_SYSTEM_ENVIRONMENT_PATH)
+    else()
+      list(APPEND _boost_LIBRARY_SEARCH_DIRS_${c} PATHS
+        C:/boost/lib
+        C:/boost
+        /sw/local/lib
+        )
+    endif()
+  endif()
+endforeach()
+
+if(Boost_DEBUG)
+  message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+    "_boost_LIBRARY_SEARCH_DIRS_RELEASE = ${_boost_LIBRARY_SEARCH_DIRS_RELEASE}"
+    "_boost_LIBRARY_SEARCH_DIRS_DEBUG   = ${_boost_LIBRARY_SEARCH_DIRS_DEBUG}")
+endif()
+
+# Support preference of static libs by adjusting CMAKE_FIND_LIBRARY_SUFFIXES
+if( Boost_USE_STATIC_LIBS )
+  set( _boost_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
+  if(WIN32)
+    set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
+  else()
+    set(CMAKE_FIND_LIBRARY_SUFFIXES .a )
+  endif()
+endif()
+
+# We want to use the tag inline below without risking double dashes
+if(_boost_RELEASE_ABI_TAG)
+  if(${_boost_RELEASE_ABI_TAG} STREQUAL "-")
+    set(_boost_RELEASE_ABI_TAG "")
+  endif()
+endif()
+if(_boost_DEBUG_ABI_TAG)
+  if(${_boost_DEBUG_ABI_TAG} STREQUAL "-")
+    set(_boost_DEBUG_ABI_TAG "")
+  endif()
+endif()
+
+# The previous behavior of FindBoost when Boost_USE_STATIC_LIBS was enabled
+# on WIN32 was to:
+#  1. Search for static libs compiled against a SHARED C++ standard runtime library (use if found)
+#  2. Search for static libs compiled against a STATIC C++ standard runtime library (use if found)
+# We maintain this behavior since changing it could break people's builds.
+# To disable the ambiguous behavior, the user need only
+# set Boost_USE_STATIC_RUNTIME either ON or OFF.
+set(_boost_STATIC_RUNTIME_WORKAROUND false)
+if(WIN32 AND Boost_USE_STATIC_LIBS)
+  if(NOT DEFINED Boost_USE_STATIC_RUNTIME)
+    set(_boost_STATIC_RUNTIME_WORKAROUND true)
+  endif()
+endif()
+
+# On versions < 1.35, remove the System library from the considered list
+# since it wasn't added until 1.35.
+if(Boost_VERSION AND Boost_FIND_COMPONENTS)
+   if(Boost_VERSION LESS 103500)
+     list(REMOVE_ITEM Boost_FIND_COMPONENTS system)
+   endif()
+endif()
+
+# Additional components may be required via component dependencies.
+# Add any missing components to the list.
+_Boost_MISSING_DEPENDENCIES(Boost_FIND_COMPONENTS _Boost_EXTRA_FIND_COMPONENTS)
+
+# If thread is required, get the thread libs as a dependency
+list(FIND Boost_FIND_COMPONENTS thread _Boost_THREAD_DEPENDENCY_LIBS)
+if(NOT _Boost_THREAD_DEPENDENCY_LIBS EQUAL -1)
+  include(CMakeFindDependencyMacro)
+  find_dependency(Threads)
+endif()
+
+# If the user changed any of our control inputs flush previous results.
+if(_Boost_CHANGE_LIBDIR OR _Boost_CHANGE_LIBNAME)
+  foreach(COMPONENT ${_Boost_COMPONENTS_SEARCHED})
+    string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
+    foreach(c DEBUG RELEASE)
+      set(_var Boost_${UPPERCOMPONENT}_LIBRARY_${c})
+      unset(${_var} CACHE)
+      set(${_var} "${_var}-NOTFOUND")
+    endforeach()
+  endforeach()
+  set(_Boost_COMPONENTS_SEARCHED "")
+endif()
+
+foreach(COMPONENT ${Boost_FIND_COMPONENTS})
+  string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
+
+  set( _boost_docstring_release "Boost ${COMPONENT} library (release)")
+  set( _boost_docstring_debug   "Boost ${COMPONENT} library (debug)")
+
+  # Compute component-specific hints.
+  set(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT "")
+  if(${COMPONENT} STREQUAL "mpi" OR ${COMPONENT} STREQUAL "mpi_python" OR
+     ${COMPONENT} STREQUAL "graph_parallel")
+    foreach(lib ${MPI_CXX_LIBRARIES} ${MPI_C_LIBRARIES})
+      if(IS_ABSOLUTE "${lib}")
+        get_filename_component(libdir "${lib}" PATH)
+        string(REPLACE "\\" "/" libdir "${libdir}")
+        list(APPEND _Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT ${libdir})
+      endif()
+    endforeach()
+  endif()
+
+  # Consolidate and report component-specific hints.
+  if(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
+    list(REMOVE_DUPLICATES _Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
+    if(Boost_DEBUG)
+      message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+        "Component-specific library search paths for ${COMPONENT}: "
+        "${_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT}")
+    endif()
+  endif()
+
+  #
+  # Find headers
+  #
+  _Boost_COMPONENT_HEADERS("${COMPONENT}" Boost_${UPPERCOMPONENT}_HEADER_NAME)
+  # Look for a standard boost header file.
+  if(Boost_${UPPERCOMPONENT}_HEADER_NAME)
+    if(EXISTS "${Boost_INCLUDE_DIR}/${Boost_${UPPERCOMPONENT}_HEADER_NAME}")
+      set(Boost_${UPPERCOMPONENT}_HEADER ON)
+    else()
+      set(Boost_${UPPERCOMPONENT}_HEADER OFF)
+    endif()
+  else()
+    set(Boost_${UPPERCOMPONENT}_HEADER ON)
+    message(WARNING "No header defined for ${COMPONENT}; skipping header check")
+  endif()
+
+  #
+  # Find RELEASE libraries
+  #
+  set(_boost_RELEASE_NAMES
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}-${Boost_LIB_VERSION}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}-${Boost_LIB_VERSION}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT} )
+  if(_boost_STATIC_RUNTIME_WORKAROUND)
+    set(_boost_RELEASE_STATIC_ABI_TAG "-s${_boost_RELEASE_ABI_TAG}")
+    list(APPEND _boost_RELEASE_NAMES
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG} )
+  endif()
+  if(Boost_THREADAPI AND ${COMPONENT} STREQUAL "thread")
+     _Boost_PREPEND_LIST_WITH_THREADAPI(_boost_RELEASE_NAMES ${_boost_RELEASE_NAMES})
+  endif()
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "Searching for ${UPPERCOMPONENT}_LIBRARY_RELEASE: ${_boost_RELEASE_NAMES}")
+  endif()
+
+  # if Boost_LIBRARY_DIR_RELEASE is not defined,
+  # but Boost_LIBRARY_DIR_DEBUG is, look there first for RELEASE libs
+  if(NOT Boost_LIBRARY_DIR_RELEASE AND Boost_LIBRARY_DIR_DEBUG)
+    list(INSERT _boost_LIBRARY_SEARCH_DIRS_RELEASE 0 ${Boost_LIBRARY_DIR_DEBUG})
+  endif()
+
+  # Avoid passing backslashes to _Boost_FIND_LIBRARY due to macro re-parsing.
+  string(REPLACE "\\" "/" _boost_LIBRARY_SEARCH_DIRS_tmp "${_boost_LIBRARY_SEARCH_DIRS_RELEASE}")
+
+  _Boost_FIND_LIBRARY(Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE RELEASE
+    NAMES ${_boost_RELEASE_NAMES}
+    HINTS ${_boost_LIBRARY_SEARCH_DIRS_tmp}
+    NAMES_PER_DIR
+    DOC "${_boost_docstring_release}"
+    )
+
+  #
+  # Find DEBUG libraries
+  #
+  set(_boost_DEBUG_NAMES
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}-${Boost_LIB_VERSION}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}-${Boost_LIB_VERSION}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}
+    ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT} )
+  if(_boost_STATIC_RUNTIME_WORKAROUND)
+    set(_boost_DEBUG_STATIC_ABI_TAG "-s${_boost_DEBUG_ABI_TAG}")
+    list(APPEND _boost_DEBUG_NAMES
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
+      ${Boost_LIB_PREFIX}${Boost_NAMESPACE}_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG} )
+  endif()
+  if(Boost_THREADAPI AND ${COMPONENT} STREQUAL "thread")
+     _Boost_PREPEND_LIST_WITH_THREADAPI(_boost_DEBUG_NAMES ${_boost_DEBUG_NAMES})
+  endif()
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "Searching for ${UPPERCOMPONENT}_LIBRARY_DEBUG: ${_boost_DEBUG_NAMES}")
+  endif()
+
+  # if Boost_LIBRARY_DIR_DEBUG is not defined,
+  # but Boost_LIBRARY_DIR_RELEASE is, look there first for DEBUG libs
+  if(NOT Boost_LIBRARY_DIR_DEBUG AND Boost_LIBRARY_DIR_RELEASE)
+    list(INSERT _boost_LIBRARY_SEARCH_DIRS_DEBUG 0 ${Boost_LIBRARY_DIR_RELEASE})
+  endif()
+
+  # Avoid passing backslashes to _Boost_FIND_LIBRARY due to macro re-parsing.
+  string(REPLACE "\\" "/" _boost_LIBRARY_SEARCH_DIRS_tmp "${_boost_LIBRARY_SEARCH_DIRS_DEBUG}")
+
+  _Boost_FIND_LIBRARY(Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG DEBUG
+    NAMES ${_boost_DEBUG_NAMES}
+    HINTS ${_boost_LIBRARY_SEARCH_DIRS_tmp}
+    NAMES_PER_DIR
+    DOC "${_boost_docstring_debug}"
+    )
+
+  if(Boost_REALPATH)
+    _Boost_SWAP_WITH_REALPATH(Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE "${_boost_docstring_release}")
+    _Boost_SWAP_WITH_REALPATH(Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG   "${_boost_docstring_debug}"  )
+  endif()
+
+  _Boost_ADJUST_LIB_VARS(${UPPERCOMPONENT})
+
+endforeach()
+
+# Restore the original find library ordering
+if( Boost_USE_STATIC_LIBS )
+  set(CMAKE_FIND_LIBRARY_SUFFIXES ${_boost_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
+endif()
+
+# ------------------------------------------------------------------------
+#  End finding boost libraries
+# ------------------------------------------------------------------------
+
+set(Boost_INCLUDE_DIRS ${Boost_INCLUDE_DIR})
+set(Boost_LIBRARY_DIRS)
+if(Boost_LIBRARY_DIR_RELEASE)
+  list(APPEND Boost_LIBRARY_DIRS ${Boost_LIBRARY_DIR_RELEASE})
+endif()
+if(Boost_LIBRARY_DIR_DEBUG)
+  list(APPEND Boost_LIBRARY_DIRS ${Boost_LIBRARY_DIR_DEBUG})
+endif()
+if(Boost_LIBRARY_DIRS)
+  list(REMOVE_DUPLICATES Boost_LIBRARY_DIRS)
+endif()
+
+# The above setting of Boost_FOUND was based only on the header files.
+# Update it for the requested component libraries.
+if(Boost_FOUND)
+  # The headers were found.  Check for requested component libs.
+  set(_boost_CHECKED_COMPONENT FALSE)
+  set(_Boost_MISSING_COMPONENTS "")
+  foreach(COMPONENT ${Boost_FIND_COMPONENTS})
+    string(TOUPPER ${COMPONENT} COMPONENT)
+    set(_boost_CHECKED_COMPONENT TRUE)
+    if(NOT Boost_${COMPONENT}_FOUND)
+      string(TOLOWER ${COMPONENT} COMPONENT)
+      list(APPEND _Boost_MISSING_COMPONENTS ${COMPONENT})
+    endif()
+  endforeach()
+  if(_Boost_MISSING_COMPONENTS AND _Boost_EXTRA_FIND_COMPONENTS)
+    # Optional indirect dependencies are not counted as missing.
+    list(REMOVE_ITEM _Boost_MISSING_COMPONENTS ${_Boost_EXTRA_FIND_COMPONENTS})
+  endif()
+
+  if(Boost_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] Boost_FOUND = ${Boost_FOUND}")
+  endif()
+
+  if (_Boost_MISSING_COMPONENTS)
+    set(Boost_FOUND 0)
+    # We were unable to find some libraries, so generate a sensible
+    # error message that lists the libraries we were unable to find.
+    set(Boost_ERROR_REASON
+      "${Boost_ERROR_REASON}\nCould not find the following")
+    if(Boost_USE_STATIC_LIBS)
+      set(Boost_ERROR_REASON "${Boost_ERROR_REASON} static")
+    endif()
+    set(Boost_ERROR_REASON
+      "${Boost_ERROR_REASON} Boost libraries:\n")
+    foreach(COMPONENT ${_Boost_MISSING_COMPONENTS})
+      set(Boost_ERROR_REASON
+        "${Boost_ERROR_REASON}        ${Boost_NAMESPACE}_${COMPONENT}\n")
+    endforeach()
+
+    list(LENGTH Boost_FIND_COMPONENTS Boost_NUM_COMPONENTS_WANTED)
+    list(LENGTH _Boost_MISSING_COMPONENTS Boost_NUM_MISSING_COMPONENTS)
+    if (${Boost_NUM_COMPONENTS_WANTED} EQUAL ${Boost_NUM_MISSING_COMPONENTS})
+      set(Boost_ERROR_REASON
+        "${Boost_ERROR_REASON}No Boost libraries were found. You may need to set BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT to the location of Boost.")
+    else ()
+      set(Boost_ERROR_REASON
+        "${Boost_ERROR_REASON}Some (but not all) of the required Boost libraries were found. You may need to install these additional Boost libraries. Alternatively, set BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT to the location of Boost.")
+    endif ()
+  endif ()
+
+  if( NOT Boost_LIBRARY_DIRS AND NOT _boost_CHECKED_COMPONENT )
+    # Compatibility Code for backwards compatibility with CMake
+    # 2.4's FindBoost module.
+
+    # Look for the boost library path.
+    # Note that the user may not have installed any libraries
+    # so it is quite possible the Boost_LIBRARY_DIRS may not exist.
+    set(_boost_LIB_DIR ${Boost_INCLUDE_DIR})
+
+    if("${_boost_LIB_DIR}" MATCHES "boost-[0-9]+")
+      get_filename_component(_boost_LIB_DIR ${_boost_LIB_DIR} PATH)
+    endif()
+
+    if("${_boost_LIB_DIR}" MATCHES "/include$")
+      # Strip off the trailing "/include" in the path.
+      get_filename_component(_boost_LIB_DIR ${_boost_LIB_DIR} PATH)
+    endif()
+
+    if(EXISTS "${_boost_LIB_DIR}/lib")
+      set(_boost_LIB_DIR ${_boost_LIB_DIR}/lib)
+    else()
+      if(EXISTS "${_boost_LIB_DIR}/stage/lib")
+        set(_boost_LIB_DIR ${_boost_LIB_DIR}/stage/lib)
+      else()
+        set(_boost_LIB_DIR "")
+      endif()
+    endif()
+
+    if(_boost_LIB_DIR AND EXISTS "${_boost_LIB_DIR}")
+      set(Boost_LIBRARY_DIRS ${_boost_LIB_DIR})
+    endif()
+
+  endif()
+else()
+  # Boost headers were not found so no components were found.
+  foreach(COMPONENT ${Boost_FIND_COMPONENTS})
+    string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
+    set(Boost_${UPPERCOMPONENT}_FOUND 0)
+  endforeach()
+endif()
+
+# ------------------------------------------------------------------------
+#  Add imported targets
+# ------------------------------------------------------------------------
+
+if(Boost_FOUND)
+  # For header-only libraries
+  if(NOT TARGET Boost::boost)
+    add_library(Boost::boost INTERFACE IMPORTED)
+    if(Boost_INCLUDE_DIRS)
+      set_target_properties(Boost::boost PROPERTIES
+        INTERFACE_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}")
+    endif()
+  endif()
+
+  foreach(COMPONENT ${Boost_FIND_COMPONENTS})
+    if(_Boost_IMPORTED_TARGETS AND NOT TARGET Boost::${COMPONENT})
+      string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
+      if(Boost_${UPPERCOMPONENT}_FOUND)
+        if(Boost_USE_STATIC_LIBS)
+          add_library(Boost::${COMPONENT} STATIC IMPORTED)
+        else()
+          # Even if Boost_USE_STATIC_LIBS is OFF, we might have static
+          # libraries as a result.
+          add_library(Boost::${COMPONENT} UNKNOWN IMPORTED)
+        endif()
+        if(Boost_INCLUDE_DIRS)
+          set_target_properties(Boost::${COMPONENT} PROPERTIES
+            INTERFACE_INCLUDE_DIRECTORIES "${Boost_INCLUDE_DIRS}")
+        endif()
+        if(EXISTS "${Boost_${UPPERCOMPONENT}_LIBRARY}")
+          set_target_properties(Boost::${COMPONENT} PROPERTIES
+            IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
+            IMPORTED_LOCATION "${Boost_${UPPERCOMPONENT}_LIBRARY}")
+        endif()
+        if(EXISTS "${Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG}")
+          set_property(TARGET Boost::${COMPONENT} APPEND PROPERTY
+            IMPORTED_CONFIGURATIONS DEBUG)
+          set_target_properties(Boost::${COMPONENT} PROPERTIES
+            IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "CXX"
+            IMPORTED_LOCATION_DEBUG "${Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG}")
+        endif()
+        if(EXISTS "${Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE}")
+          set_property(TARGET Boost::${COMPONENT} APPEND PROPERTY
+            IMPORTED_CONFIGURATIONS RELEASE)
+          set_target_properties(Boost::${COMPONENT} PROPERTIES
+            IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "CXX"
+            IMPORTED_LOCATION_RELEASE "${Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE}")
+        endif()
+        if(_Boost_${UPPERCOMPONENT}_DEPENDENCIES)
+          unset(_Boost_${UPPERCOMPONENT}_TARGET_DEPENDENCIES)
+          foreach(dep ${_Boost_${UPPERCOMPONENT}_DEPENDENCIES})
+            list(APPEND _Boost_${UPPERCOMPONENT}_TARGET_DEPENDENCIES Boost::${dep})
+          endforeach()
+          if(COMPONENT STREQUAL "thread")
+            list(APPEND _Boost_${UPPERCOMPONENT}_TARGET_DEPENDENCIES Threads::Threads)
+          endif()
+          set_target_properties(Boost::${COMPONENT} PROPERTIES
+            INTERFACE_LINK_LIBRARIES "${_Boost_${UPPERCOMPONENT}_TARGET_DEPENDENCIES}")
+        endif()
+      endif()
+    endif()
+  endforeach()
+endif()
+
+# ------------------------------------------------------------------------
+#  Notification to end user about what was found
+# ------------------------------------------------------------------------
+
+set(Boost_LIBRARIES "")
+if(Boost_FOUND)
+  if(NOT Boost_FIND_QUIETLY)
+    message(STATUS "Boost version: ${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
+    if(Boost_FIND_COMPONENTS)
+      message(STATUS "Found the following Boost libraries:")
+    endif()
+  endif()
+  foreach( COMPONENT  ${Boost_FIND_COMPONENTS} )
+    string( TOUPPER ${COMPONENT} UPPERCOMPONENT )
+    if( Boost_${UPPERCOMPONENT}_FOUND )
+      if(NOT Boost_FIND_QUIETLY)
+        message (STATUS "  ${COMPONENT}")
+      endif()
+      list(APPEND Boost_LIBRARIES ${Boost_${UPPERCOMPONENT}_LIBRARY})
+    endif()
+  endforeach()
+else()
+  if(Boost_FIND_REQUIRED)
+    message(SEND_ERROR "Unable to find the requested Boost libraries.\n${Boost_ERROR_REASON}")
+  else()
+    if(NOT Boost_FIND_QUIETLY)
+      # we opt not to automatically output Boost_ERROR_REASON here as
+      # it could be quite lengthy and somewhat imposing in its requests
+      # Since Boost is not always a required dependency we'll leave this
+      # up to the end-user.
+      if(Boost_DEBUG OR Boost_DETAILED_FAILURE_MSG)
+        message(STATUS "Could NOT find Boost\n${Boost_ERROR_REASON}")
+      else()
+        message(STATUS "Could NOT find Boost")
+      endif()
+    endif()
+  endif()
+endif()
+
+# Configure display of cache entries in GUI.
+foreach(v BOOSTROOT BOOST_ROOT ${_Boost_VARS_INC} ${_Boost_VARS_LIB})
+  get_property(_type CACHE ${v} PROPERTY TYPE)
+  if(_type)
+    set_property(CACHE ${v} PROPERTY ADVANCED 1)
+    if("x${_type}" STREQUAL "xUNINITIALIZED")
+      if("x${v}" STREQUAL "xBoost_ADDITIONAL_VERSIONS")
+        set_property(CACHE ${v} PROPERTY TYPE STRING)
+      else()
+        set_property(CACHE ${v} PROPERTY TYPE PATH)
+      endif()
+    endif()
+  endif()
+endforeach()
+
+# Record last used values of input variables so we can
+# detect on the next run if the user changed them.
+foreach(v
+    ${_Boost_VARS_INC} ${_Boost_VARS_LIB}
+    ${_Boost_VARS_DIR} ${_Boost_VARS_NAME}
+    )
+  if(DEFINED ${v})
+    set(_${v}_LAST "${${v}}" CACHE INTERNAL "Last used ${v} value.")
+  else()
+    unset(_${v}_LAST CACHE)
+  endif()
+endforeach()
+
+# Maintain a persistent list of components requested anywhere since
+# the last flush.
+set(_Boost_COMPONENTS_SEARCHED "${_Boost_COMPONENTS_SEARCHED}")
+list(APPEND _Boost_COMPONENTS_SEARCHED ${Boost_FIND_COMPONENTS})
+list(REMOVE_DUPLICATES _Boost_COMPONENTS_SEARCHED)
+list(SORT _Boost_COMPONENTS_SEARCHED)
+set(_Boost_COMPONENTS_SEARCHED "${_Boost_COMPONENTS_SEARCHED}"
+  CACHE INTERNAL "Components requested for this build tree.")
diff --git a/share/cmake-3.2/Modules/FindBullet.cmake b/share/cmake-3.6/Modules/FindBullet.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindBullet.cmake
rename to share/cmake-3.6/Modules/FindBullet.cmake
diff --git a/share/cmake-3.2/Modules/FindCABLE.cmake b/share/cmake-3.6/Modules/FindCABLE.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCABLE.cmake
rename to share/cmake-3.6/Modules/FindCABLE.cmake
diff --git a/share/cmake-3.6/Modules/FindCUDA.cmake b/share/cmake-3.6/Modules/FindCUDA.cmake
new file mode 100644
index 0000000..48bb554
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindCUDA.cmake
@@ -0,0 +1,1833 @@
+#.rst:
+# FindCUDA
+# --------
+#
+# Tools for building CUDA C files: libraries and build dependencies.
+#
+# This script locates the NVIDIA CUDA C tools.  It should work on linux,
+# windows, and mac and should be reasonably up to date with CUDA C
+# releases.
+#
+# This script makes use of the standard find_package arguments of
+# <VERSION>, REQUIRED and QUIET.  CUDA_FOUND will report if an
+# acceptable version of CUDA was found.
+#
+# The script will prompt the user to specify CUDA_TOOLKIT_ROOT_DIR if
+# the prefix cannot be determined by the location of nvcc in the system
+# path and REQUIRED is specified to find_package().  To use a different
+# installed version of the toolkit set the environment variable
+# CUDA_BIN_PATH before running cmake (e.g.
+# CUDA_BIN_PATH=/usr/local/cuda1.0 instead of the default
+# /usr/local/cuda) or set CUDA_TOOLKIT_ROOT_DIR after configuring.  If
+# you change the value of CUDA_TOOLKIT_ROOT_DIR, various components that
+# depend on the path will be relocated.
+#
+# It might be necessary to set CUDA_TOOLKIT_ROOT_DIR manually on certain
+# platforms, or to use a cuda runtime not installed in the default
+# location.  In newer versions of the toolkit the cuda library is
+# included with the graphics driver- be sure that the driver version
+# matches what is needed by the cuda runtime version.
+#
+# The following variables affect the behavior of the macros in the
+# script (in alphebetical order).  Note that any of these flags can be
+# changed multiple times in the same directory before calling
+# CUDA_ADD_EXECUTABLE, CUDA_ADD_LIBRARY, CUDA_COMPILE, CUDA_COMPILE_PTX,
+# CUDA_COMPILE_FATBIN, CUDA_COMPILE_CUBIN or CUDA_WRAP_SRCS::
+#
+#   CUDA_64_BIT_DEVICE_CODE (Default matches host bit size)
+#   -- Set to ON to compile for 64 bit device code, OFF for 32 bit device code.
+#      Note that making this different from the host code when generating object
+#      or C files from CUDA code just won't work, because size_t gets defined by
+#      nvcc in the generated source.  If you compile to PTX and then load the
+#      file yourself, you can mix bit sizes between device and host.
+#
+#   CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE (Default ON)
+#   -- Set to ON if you want the custom build rule to be attached to the source
+#      file in Visual Studio.  Turn OFF if you add the same cuda file to multiple
+#      targets.
+#
+#      This allows the user to build the target from the CUDA file; however, bad
+#      things can happen if the CUDA source file is added to multiple targets.
+#      When performing parallel builds it is possible for the custom build
+#      command to be run more than once and in parallel causing cryptic build
+#      errors.  VS runs the rules for every source file in the target, and a
+#      source can have only one rule no matter how many projects it is added to.
+#      When the rule is run from multiple targets race conditions can occur on
+#      the generated file.  Eventually everything will get built, but if the user
+#      is unaware of this behavior, there may be confusion.  It would be nice if
+#      this script could detect the reuse of source files across multiple targets
+#      and turn the option off for the user, but no good solution could be found.
+#
+#   CUDA_BUILD_CUBIN (Default OFF)
+#   -- Set to ON to enable and extra compilation pass with the -cubin option in
+#      Device mode. The output is parsed and register, shared memory usage is
+#      printed during build.
+#
+#   CUDA_BUILD_EMULATION (Default OFF for device mode)
+#   -- Set to ON for Emulation mode. -D_DEVICEEMU is defined for CUDA C files
+#      when CUDA_BUILD_EMULATION is TRUE.
+#
+#   CUDA_GENERATED_OUTPUT_DIR (Default CMAKE_CURRENT_BINARY_DIR)
+#   -- Set to the path you wish to have the generated files placed.  If it is
+#      blank output files will be placed in CMAKE_CURRENT_BINARY_DIR.
+#      Intermediate files will always be placed in
+#      CMAKE_CURRENT_BINARY_DIR/CMakeFiles.
+#
+#   CUDA_HOST_COMPILATION_CPP (Default ON)
+#   -- Set to OFF for C compilation of host code.
+#
+#   CUDA_HOST_COMPILER (Default CMAKE_C_COMPILER, $(VCInstallDir)/bin for VS)
+#   -- Set the host compiler to be used by nvcc.  Ignored if -ccbin or
+#      --compiler-bindir is already present in the CUDA_NVCC_FLAGS or
+#      CUDA_NVCC_FLAGS_<CONFIG> variables.  For Visual Studio targets
+#      $(VCInstallDir)/bin is a special value that expands out to the path when
+#      the command is run from within VS.
+#
+#   CUDA_NVCC_FLAGS
+#   CUDA_NVCC_FLAGS_<CONFIG>
+#   -- Additional NVCC command line arguments.  NOTE: multiple arguments must be
+#      semi-colon delimited (e.g. --compiler-options;-Wall)
+#
+#   CUDA_PROPAGATE_HOST_FLAGS (Default ON)
+#   -- Set to ON to propagate CMAKE_{C,CXX}_FLAGS and their configuration
+#      dependent counterparts (e.g. CMAKE_C_FLAGS_DEBUG) automatically to the
+#      host compiler through nvcc's -Xcompiler flag.  This helps make the
+#      generated host code match the rest of the system better.  Sometimes
+#      certain flags give nvcc problems, and this will help you turn the flag
+#      propagation off.  This does not affect the flags supplied directly to nvcc
+#      via CUDA_NVCC_FLAGS or through the OPTION flags specified through
+#      CUDA_ADD_LIBRARY, CUDA_ADD_EXECUTABLE, or CUDA_WRAP_SRCS.  Flags used for
+#      shared library compilation are not affected by this flag.
+#
+#   CUDA_SEPARABLE_COMPILATION (Default OFF)
+#   -- If set this will enable separable compilation for all CUDA runtime object
+#      files.  If used outside of CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY
+#      (e.g. calling CUDA_WRAP_SRCS directly),
+#      CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME and
+#      CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS should be called.
+#
+#   CUDA_SOURCE_PROPERTY_FORMAT
+#   -- If this source file property is set, it can override the format specified
+#      to CUDA_WRAP_SRCS (OBJ, PTX, CUBIN, or FATBIN).  If an input source file
+#      is not a .cu file, setting this file will cause it to be treated as a .cu
+#      file. See documentation for set_source_files_properties on how to set
+#      this property.
+#
+#   CUDA_USE_STATIC_CUDA_RUNTIME (Default ON)
+#   -- When enabled the static version of the CUDA runtime library will be used
+#      in CUDA_LIBRARIES.  If the version of CUDA configured doesn't support
+#      this option, then it will be silently disabled.
+#
+#   CUDA_VERBOSE_BUILD (Default OFF)
+#   -- Set to ON to see all the commands used when building the CUDA file.  When
+#      using a Makefile generator the value defaults to VERBOSE (run make
+#      VERBOSE=1 to see output), although setting CUDA_VERBOSE_BUILD to ON will
+#      always print the output.
+#
+# The script creates the following macros (in alphebetical order)::
+#
+#   CUDA_ADD_CUFFT_TO_TARGET( cuda_target )
+#   -- Adds the cufft library to the target (can be any target).  Handles whether
+#      you are in emulation mode or not.
+#
+#   CUDA_ADD_CUBLAS_TO_TARGET( cuda_target )
+#   -- Adds the cublas library to the target (can be any target).  Handles
+#      whether you are in emulation mode or not.
+#
+#   CUDA_ADD_EXECUTABLE( cuda_target file0 file1 ...
+#                        [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
+#   -- Creates an executable "cuda_target" which is made up of the files
+#      specified.  All of the non CUDA C files are compiled using the standard
+#      build rules specified by CMAKE and the cuda files are compiled to object
+#      files using nvcc and the host compiler.  In addition CUDA_INCLUDE_DIRS is
+#      added automatically to include_directories().  Some standard CMake target
+#      calls can be used on the target after calling this macro
+#      (e.g. set_target_properties and target_link_libraries), but setting
+#      properties that adjust compilation flags will not affect code compiled by
+#      nvcc.  Such flags should be modified before calling CUDA_ADD_EXECUTABLE,
+#      CUDA_ADD_LIBRARY or CUDA_WRAP_SRCS.
+#
+#   CUDA_ADD_LIBRARY( cuda_target file0 file1 ...
+#                     [STATIC | SHARED | MODULE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
+#   -- Same as CUDA_ADD_EXECUTABLE except that a library is created.
+#
+#   CUDA_BUILD_CLEAN_TARGET()
+#   -- Creates a convience target that deletes all the dependency files
+#      generated.  You should make clean after running this target to ensure the
+#      dependency files get regenerated.
+#
+#   CUDA_COMPILE( generated_files file0 file1 ... [STATIC | SHARED | MODULE]
+#                 [OPTIONS ...] )
+#   -- Returns a list of generated files from the input source files to be used
+#      with ADD_LIBRARY or ADD_EXECUTABLE.
+#
+#   CUDA_COMPILE_PTX( generated_files file0 file1 ... [OPTIONS ...] )
+#   -- Returns a list of PTX files generated from the input source files.
+#
+#   CUDA_COMPILE_FATBIN( generated_files file0 file1 ... [OPTIONS ...] )
+#   -- Returns a list of FATBIN files generated from the input source files.
+#
+#   CUDA_COMPILE_CUBIN( generated_files file0 file1 ... [OPTIONS ...] )
+#   -- Returns a list of CUBIN files generated from the input source files.
+#
+#   CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME( output_file_var
+#                                                        cuda_target
+#                                                        object_files )
+#   -- Compute the name of the intermediate link file used for separable
+#      compilation.  This file name is typically passed into
+#      CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS.  output_file_var is produced
+#      based on cuda_target the list of objects files that need separable
+#      compilation as specified by object_files.  If the object_files list is
+#      empty, then output_file_var will be empty.  This function is called
+#      automatically for CUDA_ADD_LIBRARY and CUDA_ADD_EXECUTABLE.  Note that
+#      this is a function and not a macro.
+#
+#   CUDA_INCLUDE_DIRECTORIES( path0 path1 ... )
+#   -- Sets the directories that should be passed to nvcc
+#      (e.g. nvcc -Ipath0 -Ipath1 ... ). These paths usually contain other .cu
+#      files.
+#
+#
+#
+#   CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS( output_file_var cuda_target
+#                                            nvcc_flags object_files)
+#
+#   -- Generates the link object required by separable compilation from the given
+#      object files.  This is called automatically for CUDA_ADD_EXECUTABLE and
+#      CUDA_ADD_LIBRARY, but can be called manually when using CUDA_WRAP_SRCS
+#      directly.  When called from CUDA_ADD_LIBRARY or CUDA_ADD_EXECUTABLE the
+#      nvcc_flags passed in are the same as the flags passed in via the OPTIONS
+#      argument.  The only nvcc flag added automatically is the bitness flag as
+#      specified by CUDA_64_BIT_DEVICE_CODE.  Note that this is a function
+#      instead of a macro.
+#
+#   CUDA_WRAP_SRCS ( cuda_target format generated_files file0 file1 ...
+#                    [STATIC | SHARED | MODULE] [OPTIONS ...] )
+#   -- This is where all the magic happens.  CUDA_ADD_EXECUTABLE,
+#      CUDA_ADD_LIBRARY, CUDA_COMPILE, and CUDA_COMPILE_PTX all call this
+#      function under the hood.
+#
+#      Given the list of files (file0 file1 ... fileN) this macro generates
+#      custom commands that generate either PTX or linkable objects (use "PTX" or
+#      "OBJ" for the format argument to switch).  Files that don't end with .cu
+#      or have the HEADER_FILE_ONLY property are ignored.
+#
+#      The arguments passed in after OPTIONS are extra command line options to
+#      give to nvcc.  You can also specify per configuration options by
+#      specifying the name of the configuration followed by the options.  General
+#      options must precede configuration specific options.  Not all
+#      configurations need to be specified, only the ones provided will be used.
+#
+#         OPTIONS -DFLAG=2 "-DFLAG_OTHER=space in flag"
+#         DEBUG -g
+#         RELEASE --use_fast_math
+#         RELWITHDEBINFO --use_fast_math;-g
+#         MINSIZEREL --use_fast_math
+#
+#      For certain configurations (namely VS generating object files with
+#      CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE set to ON), no generated file will
+#      be produced for the given cuda file.  This is because when you add the
+#      cuda file to Visual Studio it knows that this file produces an object file
+#      and will link in the resulting object file automatically.
+#
+#      This script will also generate a separate cmake script that is used at
+#      build time to invoke nvcc.  This is for several reasons.
+#
+#        1. nvcc can return negative numbers as return values which confuses
+#        Visual Studio into thinking that the command succeeded.  The script now
+#        checks the error codes and produces errors when there was a problem.
+#
+#        2. nvcc has been known to not delete incomplete results when it
+#        encounters problems.  This confuses build systems into thinking the
+#        target was generated when in fact an unusable file exists.  The script
+#        now deletes the output files if there was an error.
+#
+#        3. By putting all the options that affect the build into a file and then
+#        make the build rule dependent on the file, the output files will be
+#        regenerated when the options change.
+#
+#      This script also looks at optional arguments STATIC, SHARED, or MODULE to
+#      determine when to target the object compilation for a shared library.
+#      BUILD_SHARED_LIBS is ignored in CUDA_WRAP_SRCS, but it is respected in
+#      CUDA_ADD_LIBRARY.  On some systems special flags are added for building
+#      objects intended for shared libraries.  A preprocessor macro,
+#      <target_name>_EXPORTS is defined when a shared library compilation is
+#      detected.
+#
+#      Flags passed into add_definitions with -D or /D are passed along to nvcc.
+#
+#
+#
+# The script defines the following variables::
+#
+#   CUDA_VERSION_MAJOR    -- The major version of cuda as reported by nvcc.
+#   CUDA_VERSION_MINOR    -- The minor version.
+#   CUDA_VERSION
+#   CUDA_VERSION_STRING   -- CUDA_VERSION_MAJOR.CUDA_VERSION_MINOR
+#   CUDA_HAS_FP16         -- Whether a short float (float16,fp16) is supported.
+#
+#   CUDA_TOOLKIT_ROOT_DIR -- Path to the CUDA Toolkit (defined if not set).
+#   CUDA_SDK_ROOT_DIR     -- Path to the CUDA SDK.  Use this to find files in the
+#                            SDK.  This script will not directly support finding
+#                            specific libraries or headers, as that isn't
+#                            supported by NVIDIA.  If you want to change
+#                            libraries when the path changes see the
+#                            FindCUDA.cmake script for an example of how to clear
+#                            these variables.  There are also examples of how to
+#                            use the CUDA_SDK_ROOT_DIR to locate headers or
+#                            libraries, if you so choose (at your own risk).
+#   CUDA_INCLUDE_DIRS     -- Include directory for cuda headers.  Added automatically
+#                            for CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY.
+#   CUDA_LIBRARIES        -- Cuda RT library.
+#   CUDA_CUFFT_LIBRARIES  -- Device or emulation library for the Cuda FFT
+#                            implementation (alternative to:
+#                            CUDA_ADD_CUFFT_TO_TARGET macro)
+#   CUDA_CUBLAS_LIBRARIES -- Device or emulation library for the Cuda BLAS
+#                            implementation (alterative to:
+#                            CUDA_ADD_CUBLAS_TO_TARGET macro).
+#   CUDA_cudart_static_LIBRARY -- Statically linkable cuda runtime library.
+#                                 Only available for CUDA version 5.5+
+#   CUDA_cupti_LIBRARY    -- CUDA Profiling Tools Interface library.
+#                            Only available for CUDA version 4.0+.
+#   CUDA_curand_LIBRARY   -- CUDA Random Number Generation library.
+#                            Only available for CUDA version 3.2+.
+#   CUDA_cusolver_LIBRARY -- CUDA Direct Solver library.
+#                            Only available for CUDA version 7.0+.
+#   CUDA_cusparse_LIBRARY -- CUDA Sparse Matrix library.
+#                            Only available for CUDA version 3.2+.
+#   CUDA_npp_LIBRARY      -- NVIDIA Performance Primitives lib.
+#                            Only available for CUDA version 4.0+.
+#   CUDA_nppc_LIBRARY     -- NVIDIA Performance Primitives lib (core).
+#                            Only available for CUDA version 5.5+.
+#   CUDA_nppi_LIBRARY     -- NVIDIA Performance Primitives lib (image processing).
+#                            Only available for CUDA version 5.5+.
+#   CUDA_npps_LIBRARY     -- NVIDIA Performance Primitives lib (signal processing).
+#                            Only available for CUDA version 5.5+.
+#   CUDA_nvcuvenc_LIBRARY -- CUDA Video Encoder library.
+#                            Only available for CUDA version 3.2+.
+#                            Windows only.
+#   CUDA_nvcuvid_LIBRARY  -- CUDA Video Decoder library.
+#                            Only available for CUDA version 3.2+.
+#                            Windows only.
+#
+
+#   James Bigler, NVIDIA Corp (nvidia.com - jbigler)
+#   Abe Stephens, SCI Institute -- http://www.sci.utah.edu/~abe/FindCuda.html
+#
+#   Copyright (c) 2008 - 2009 NVIDIA Corporation.  All rights reserved.
+#
+#   Copyright (c) 2007-2009
+#   Scientific Computing and Imaging Institute, University of Utah
+#
+#   This code is licensed under the MIT License.  See the FindCUDA.cmake script
+#   for the text of the license.
+
+# The MIT License
+#
+# License for the specific language governing rights and limitations under
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+#
+###############################################################################
+
+# FindCUDA.cmake
+
+# This macro helps us find the location of helper files we will need the full path to
+macro(CUDA_FIND_HELPER_FILE _name _extension)
+  set(_full_name "${_name}.${_extension}")
+  # CMAKE_CURRENT_LIST_FILE contains the full path to the file currently being
+  # processed.  Using this variable, we can pull out the current path, and
+  # provide a way to get access to the other files we need local to here.
+  get_filename_component(CMAKE_CURRENT_LIST_DIR "${CMAKE_CURRENT_LIST_FILE}" PATH)
+  set(CUDA_${_name} "${CMAKE_CURRENT_LIST_DIR}/FindCUDA/${_full_name}")
+  if(NOT EXISTS "${CUDA_${_name}}")
+    set(error_message "${_full_name} not found in ${CMAKE_CURRENT_LIST_DIR}/FindCUDA")
+    if(CUDA_FIND_REQUIRED)
+      message(FATAL_ERROR "${error_message}")
+    else()
+      if(NOT CUDA_FIND_QUIETLY)
+        message(STATUS "${error_message}")
+      endif()
+    endif()
+  endif()
+  # Set this variable as internal, so the user isn't bugged with it.
+  set(CUDA_${_name} ${CUDA_${_name}} CACHE INTERNAL "Location of ${_full_name}" FORCE)
+endmacro()
+
+#####################################################################
+## CUDA_INCLUDE_NVCC_DEPENDENCIES
+##
+
+# So we want to try and include the dependency file if it exists.  If
+# it doesn't exist then we need to create an empty one, so we can
+# include it.
+
+# If it does exist, then we need to check to see if all the files it
+# depends on exist.  If they don't then we should clear the dependency
+# file and regenerate it later.  This covers the case where a header
+# file has disappeared or moved.
+
+macro(CUDA_INCLUDE_NVCC_DEPENDENCIES dependency_file)
+  set(CUDA_NVCC_DEPEND)
+  set(CUDA_NVCC_DEPEND_REGENERATE FALSE)
+
+
+  # Include the dependency file.  Create it first if it doesn't exist .  The
+  # INCLUDE puts a dependency that will force CMake to rerun and bring in the
+  # new info when it changes.  DO NOT REMOVE THIS (as I did and spent a few
+  # hours figuring out why it didn't work.
+  if(NOT EXISTS ${dependency_file})
+    file(WRITE ${dependency_file} "#FindCUDA.cmake generated file.  Do not edit.\n")
+  endif()
+  # Always include this file to force CMake to run again next
+  # invocation and rebuild the dependencies.
+  #message("including dependency_file = ${dependency_file}")
+  include(${dependency_file})
+
+  # Now we need to verify the existence of all the included files
+  # here.  If they aren't there we need to just blank this variable and
+  # make the file regenerate again.
+#   if(DEFINED CUDA_NVCC_DEPEND)
+#     message("CUDA_NVCC_DEPEND set")
+#   else()
+#     message("CUDA_NVCC_DEPEND NOT set")
+#   endif()
+  if(CUDA_NVCC_DEPEND)
+    #message("CUDA_NVCC_DEPEND found")
+    foreach(f ${CUDA_NVCC_DEPEND})
+      # message("searching for ${f}")
+      if(NOT EXISTS ${f})
+        #message("file ${f} not found")
+        set(CUDA_NVCC_DEPEND_REGENERATE TRUE)
+      endif()
+    endforeach()
+  else()
+    #message("CUDA_NVCC_DEPEND false")
+    # No dependencies, so regenerate the file.
+    set(CUDA_NVCC_DEPEND_REGENERATE TRUE)
+  endif()
+
+  #message("CUDA_NVCC_DEPEND_REGENERATE = ${CUDA_NVCC_DEPEND_REGENERATE}")
+  # No incoming dependencies, so we need to generate them.  Make the
+  # output depend on the dependency file itself, which should cause the
+  # rule to re-run.
+  if(CUDA_NVCC_DEPEND_REGENERATE)
+    set(CUDA_NVCC_DEPEND ${dependency_file})
+    #message("Generating an empty dependency_file: ${dependency_file}")
+    file(WRITE ${dependency_file} "#FindCUDA.cmake generated file.  Do not edit.\n")
+  endif()
+
+endmacro()
+
+###############################################################################
+###############################################################################
+# Setup variables' defaults
+###############################################################################
+###############################################################################
+
+# Allow the user to specify if the device code is supposed to be 32 or 64 bit.
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(CUDA_64_BIT_DEVICE_CODE_DEFAULT ON)
+else()
+  set(CUDA_64_BIT_DEVICE_CODE_DEFAULT OFF)
+endif()
+option(CUDA_64_BIT_DEVICE_CODE "Compile device code in 64 bit mode" ${CUDA_64_BIT_DEVICE_CODE_DEFAULT})
+
+# Attach the build rule to the source file in VS.  This option
+option(CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE "Attach the build rule to the CUDA source file.  Enable only when the CUDA source file is added to at most one target." ON)
+
+# Prints out extra information about the cuda file during compilation
+option(CUDA_BUILD_CUBIN "Generate and parse .cubin files in Device mode." OFF)
+
+# Set whether we are using emulation or device mode.
+option(CUDA_BUILD_EMULATION "Build in Emulation mode" OFF)
+
+# Where to put the generated output.
+set(CUDA_GENERATED_OUTPUT_DIR "" CACHE PATH "Directory to put all the output files.  If blank it will default to the CMAKE_CURRENT_BINARY_DIR")
+
+# Parse HOST_COMPILATION mode.
+option(CUDA_HOST_COMPILATION_CPP "Generated file extension" ON)
+
+# Extra user settable flags
+set(CUDA_NVCC_FLAGS "" CACHE STRING "Semi-colon delimit multiple arguments.")
+
+if(CMAKE_GENERATOR MATCHES "Visual Studio")
+  set(CUDA_HOST_COMPILER "$(VCInstallDir)bin" CACHE FILEPATH "Host side compiler used by NVCC")
+else()
+  if(APPLE
+      AND "${CMAKE_C_COMPILER_ID}" MATCHES "Clang"
+      AND "${CMAKE_C_COMPILER}" MATCHES "/cc$")
+    # Using cc which is symlink to clang may let NVCC think it is GCC and issue
+    # unhandled -dumpspecs option to clang. Also in case neither
+    # CMAKE_C_COMPILER is defined (project does not use C language) nor
+    # CUDA_HOST_COMPILER is specified manually we should skip -ccbin and let
+    # nvcc use its own default C compiler.
+    # Only care about this on APPLE with clang to avoid
+    # following symlinks to things like ccache
+    if(DEFINED CMAKE_C_COMPILER AND NOT DEFINED CUDA_HOST_COMPILER)
+      get_filename_component(c_compiler_realpath "${CMAKE_C_COMPILER}" REALPATH)
+      # if the real path does not end up being clang then
+      # go back to using CMAKE_C_COMPILER
+      if(NOT "${c_compiler_realpath}" MATCHES "/clang$")
+        set(c_compiler_realpath "${CMAKE_C_COMPILER}")
+      endif()
+    else()
+      set(c_compiler_realpath "")
+    endif()
+    set(CUDA_HOST_COMPILER "${c_compiler_realpath}" CACHE FILEPATH "Host side compiler used by NVCC")
+  else()
+    set(CUDA_HOST_COMPILER "${CMAKE_C_COMPILER}"
+      CACHE FILEPATH "Host side compiler used by NVCC")
+  endif()
+endif()
+
+# Propagate the host flags to the host compiler via -Xcompiler
+option(CUDA_PROPAGATE_HOST_FLAGS "Propage C/CXX_FLAGS and friends to the host compiler via -Xcompile" ON)
+
+# Enable CUDA_SEPARABLE_COMPILATION
+option(CUDA_SEPARABLE_COMPILATION "Compile CUDA objects with separable compilation enabled.  Requires CUDA 5.0+" OFF)
+
+# Specifies whether the commands used when compiling the .cu file will be printed out.
+option(CUDA_VERBOSE_BUILD "Print out the commands run while compiling the CUDA source file.  With the Makefile generator this defaults to VERBOSE variable specified on the command line, but can be forced on with this option." OFF)
+
+mark_as_advanced(
+  CUDA_64_BIT_DEVICE_CODE
+  CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE
+  CUDA_GENERATED_OUTPUT_DIR
+  CUDA_HOST_COMPILATION_CPP
+  CUDA_NVCC_FLAGS
+  CUDA_PROPAGATE_HOST_FLAGS
+  CUDA_BUILD_CUBIN
+  CUDA_BUILD_EMULATION
+  CUDA_VERBOSE_BUILD
+  CUDA_SEPARABLE_COMPILATION
+  )
+
+# Makefile and similar generators don't define CMAKE_CONFIGURATION_TYPES, so we
+# need to add another entry for the CMAKE_BUILD_TYPE.  We also need to add the
+# standerd set of 4 build types (Debug, MinSizeRel, Release, and RelWithDebInfo)
+# for completeness.  We need run this loop in order to accomodate the addition
+# of extra configuration types.  Duplicate entries will be removed by
+# REMOVE_DUPLICATES.
+set(CUDA_configuration_types ${CMAKE_CONFIGURATION_TYPES} ${CMAKE_BUILD_TYPE} Debug MinSizeRel Release RelWithDebInfo)
+list(REMOVE_DUPLICATES CUDA_configuration_types)
+foreach(config ${CUDA_configuration_types})
+    string(TOUPPER ${config} config_upper)
+    set(CUDA_NVCC_FLAGS_${config_upper} "" CACHE STRING "Semi-colon delimit multiple arguments.")
+    mark_as_advanced(CUDA_NVCC_FLAGS_${config_upper})
+endforeach()
+
+###############################################################################
+###############################################################################
+# Locate CUDA, Set Build Type, etc.
+###############################################################################
+###############################################################################
+
+macro(cuda_unset_include_and_libraries)
+  unset(CUDA_TOOLKIT_INCLUDE CACHE)
+  unset(CUDA_CUDART_LIBRARY CACHE)
+  unset(CUDA_CUDA_LIBRARY CACHE)
+  # Make sure you run this before you unset CUDA_VERSION.
+  if(CUDA_VERSION VERSION_EQUAL "3.0")
+    # This only existed in the 3.0 version of the CUDA toolkit
+    unset(CUDA_CUDARTEMU_LIBRARY CACHE)
+  endif()
+  unset(CUDA_cudart_static_LIBRARY CACHE)
+  unset(CUDA_cublas_LIBRARY CACHE)
+  unset(CUDA_cublas_device_LIBRARY CACHE)
+  unset(CUDA_cublasemu_LIBRARY CACHE)
+  unset(CUDA_cufft_LIBRARY CACHE)
+  unset(CUDA_cufftemu_LIBRARY CACHE)
+  unset(CUDA_cupti_LIBRARY CACHE)
+  unset(CUDA_curand_LIBRARY CACHE)
+  unset(CUDA_cusolver_LIBRARY CACHE)
+  unset(CUDA_cusparse_LIBRARY CACHE)
+  unset(CUDA_npp_LIBRARY CACHE)
+  unset(CUDA_nppc_LIBRARY CACHE)
+  unset(CUDA_nppi_LIBRARY CACHE)
+  unset(CUDA_npps_LIBRARY CACHE)
+  unset(CUDA_nvcuvenc_LIBRARY CACHE)
+  unset(CUDA_nvcuvid_LIBRARY CACHE)
+
+  unset(CUDA_USE_STATIC_CUDA_RUNTIME CACHE)
+endmacro()
+
+# Check to see if the CUDA_TOOLKIT_ROOT_DIR and CUDA_SDK_ROOT_DIR have changed,
+# if they have then clear the cache variables, so that will be detected again.
+if(NOT "${CUDA_TOOLKIT_ROOT_DIR}" STREQUAL "${CUDA_TOOLKIT_ROOT_DIR_INTERNAL}")
+  unset(CUDA_TOOLKIT_TARGET_DIR CACHE)
+  unset(CUDA_NVCC_EXECUTABLE CACHE)
+  cuda_unset_include_and_libraries()
+  unset(CUDA_VERSION CACHE)
+endif()
+
+if(NOT "${CUDA_TOOLKIT_TARGET_DIR}" STREQUAL "${CUDA_TOOLKIT_TARGET_DIR_INTERNAL}")
+  cuda_unset_include_and_libraries()
+endif()
+
+if(NOT "${CUDA_SDK_ROOT_DIR}" STREQUAL "${CUDA_SDK_ROOT_DIR_INTERNAL}")
+  # No specific variables to catch.  Use this kind of code before calling
+  # find_package(CUDA) to clean up any variables that may depend on this path.
+
+  #   unset(MY_SPECIAL_CUDA_SDK_INCLUDE_DIR CACHE)
+  #   unset(MY_SPECIAL_CUDA_SDK_LIBRARY CACHE)
+endif()
+
+# Search for the cuda distribution.
+if(NOT CUDA_TOOLKIT_ROOT_DIR)
+
+  # Search in the CUDA_BIN_PATH first.
+  find_path(CUDA_TOOLKIT_ROOT_DIR
+    NAMES nvcc nvcc.exe
+    PATHS
+      ENV CUDA_PATH
+      ENV CUDA_BIN_PATH
+    PATH_SUFFIXES bin bin64
+    DOC "Toolkit location."
+    NO_DEFAULT_PATH
+    )
+  # Now search default paths
+  find_path(CUDA_TOOLKIT_ROOT_DIR
+    NAMES nvcc nvcc.exe
+    PATHS /usr/local/bin
+          /usr/local/cuda/bin
+    DOC "Toolkit location."
+    )
+
+  if (CUDA_TOOLKIT_ROOT_DIR)
+    string(REGEX REPLACE "[/\\\\]?bin[64]*[/\\\\]?$" "" CUDA_TOOLKIT_ROOT_DIR ${CUDA_TOOLKIT_ROOT_DIR})
+    # We need to force this back into the cache.
+    set(CUDA_TOOLKIT_ROOT_DIR ${CUDA_TOOLKIT_ROOT_DIR} CACHE PATH "Toolkit location." FORCE)
+  endif()
+  if (NOT EXISTS ${CUDA_TOOLKIT_ROOT_DIR})
+    if(CUDA_FIND_REQUIRED)
+      message(FATAL_ERROR "Specify CUDA_TOOLKIT_ROOT_DIR")
+    elseif(NOT CUDA_FIND_QUIETLY)
+      message("CUDA_TOOLKIT_ROOT_DIR not found or specified")
+    endif()
+  endif ()
+endif ()
+
+# CUDA_NVCC_EXECUTABLE
+find_program(CUDA_NVCC_EXECUTABLE
+  NAMES nvcc
+  PATHS "${CUDA_TOOLKIT_ROOT_DIR}"
+  ENV CUDA_PATH
+  ENV CUDA_BIN_PATH
+  PATH_SUFFIXES bin bin64
+  NO_DEFAULT_PATH
+  )
+# Search default search paths, after we search our own set of paths.
+find_program(CUDA_NVCC_EXECUTABLE nvcc)
+mark_as_advanced(CUDA_NVCC_EXECUTABLE)
+
+if(CUDA_NVCC_EXECUTABLE AND NOT CUDA_VERSION)
+  # Compute the version.
+  execute_process (COMMAND ${CUDA_NVCC_EXECUTABLE} "--version" OUTPUT_VARIABLE NVCC_OUT)
+  string(REGEX REPLACE ".*release ([0-9]+)\\.([0-9]+).*" "\\1" CUDA_VERSION_MAJOR ${NVCC_OUT})
+  string(REGEX REPLACE ".*release ([0-9]+)\\.([0-9]+).*" "\\2" CUDA_VERSION_MINOR ${NVCC_OUT})
+  set(CUDA_VERSION "${CUDA_VERSION_MAJOR}.${CUDA_VERSION_MINOR}" CACHE STRING "Version of CUDA as computed from nvcc.")
+  mark_as_advanced(CUDA_VERSION)
+else()
+  # Need to set these based off of the cached value
+  string(REGEX REPLACE "([0-9]+)\\.([0-9]+).*" "\\1" CUDA_VERSION_MAJOR "${CUDA_VERSION}")
+  string(REGEX REPLACE "([0-9]+)\\.([0-9]+).*" "\\2" CUDA_VERSION_MINOR "${CUDA_VERSION}")
+endif()
+
+# Always set this convenience variable
+set(CUDA_VERSION_STRING "${CUDA_VERSION}")
+
+# Support for arm cross compilation with CUDA 5.5
+if(CUDA_VERSION VERSION_GREATER "5.0" AND CMAKE_CROSSCOMPILING AND CMAKE_SYSTEM_PROCESSOR MATCHES "arm" AND EXISTS "${CUDA_TOOLKIT_ROOT_DIR}/targets/armv7-linux-gnueabihf")
+  set(CUDA_TOOLKIT_TARGET_DIR "${CUDA_TOOLKIT_ROOT_DIR}/targets/armv7-linux-gnueabihf" CACHE PATH "Toolkit target location.")
+# Support for aarch64 cross compilation with CUDA 7.0
+elseif(CUDA_VERSION VERSION_GREATER "6.5" AND CMAKE_CROSSCOMPILING AND CMAKE_SYSTEM_PROCESSOR MATCHES "aarch64" AND EXISTS "${CUDA_TOOLKIT_ROOT_DIR}/targets/aarch64-linux")
+  set(CUDA_TOOLKIT_TARGET_DIR "${CUDA_TOOLKIT_ROOT_DIR}/targets/aarch64-linux" CACHE PATH "Toolkit target location.")
+else()
+  set(CUDA_TOOLKIT_TARGET_DIR "${CUDA_TOOLKIT_ROOT_DIR}" CACHE PATH "Toolkit target location.")
+endif()
+mark_as_advanced(CUDA_TOOLKIT_TARGET_DIR)
+
+# Target CPU architecture
+if(CUDA_VERSION VERSION_GREATER "5.0" AND CMAKE_CROSSCOMPILING AND CMAKE_SYSTEM_PROCESSOR MATCHES "arm")
+  set(_cuda_target_cpu_arch_initial "ARM")
+else()
+  set(_cuda_target_cpu_arch_initial "")
+endif()
+set(CUDA_TARGET_CPU_ARCH ${_cuda_target_cpu_arch_initial} CACHE STRING "Specify the name of the class of CPU architecture for which the input files must be compiled.")
+mark_as_advanced(CUDA_TARGET_CPU_ARCH)
+
+# CUDA_TOOLKIT_INCLUDE
+find_path(CUDA_TOOLKIT_INCLUDE
+  device_functions.h # Header included in toolkit
+  PATHS "${CUDA_TOOLKIT_TARGET_DIR}" "${CUDA_TOOLKIT_ROOT_DIR}"
+  ENV CUDA_PATH
+  ENV CUDA_INC_PATH
+  PATH_SUFFIXES include
+  NO_DEFAULT_PATH
+  )
+# Search default search paths, after we search our own set of paths.
+find_path(CUDA_TOOLKIT_INCLUDE device_functions.h)
+mark_as_advanced(CUDA_TOOLKIT_INCLUDE)
+
+if (CUDA_VERSION VERSION_GREATER "7.0" OR EXISTS "${CUDA_TOOLKIT_INCLUDE}/cuda_fp16.h")
+  set(CUDA_HAS_FP16 TRUE)
+else()
+  set(CUDA_HAS_FP16 FALSE)
+endif()
+
+# Set the user list of include dir to nothing to initialize it.
+set (CUDA_NVCC_INCLUDE_ARGS_USER "")
+set (CUDA_INCLUDE_DIRS ${CUDA_TOOLKIT_INCLUDE})
+
+macro(cuda_find_library_local_first_with_path_ext _var _names _doc _path_ext )
+  if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+    # CUDA 3.2+ on Windows moved the library directories, so we need the new
+    # and old paths.
+    set(_cuda_64bit_lib_dir "${_path_ext}lib/x64" "${_path_ext}lib64" "${_path_ext}libx64" )
+  endif()
+  # CUDA 3.2+ on Windows moved the library directories, so we need to new
+  # (lib/Win32) and the old path (lib).
+  find_library(${_var}
+    NAMES ${_names}
+    PATHS "${CUDA_TOOLKIT_TARGET_DIR}" "${CUDA_TOOLKIT_ROOT_DIR}"
+    ENV CUDA_PATH
+    ENV CUDA_LIB_PATH
+    PATH_SUFFIXES ${_cuda_64bit_lib_dir} "${_path_ext}lib/Win32" "${_path_ext}lib" "${_path_ext}libWin32"
+    DOC ${_doc}
+    NO_DEFAULT_PATH
+    )
+  # Search default search paths, after we search our own set of paths.
+  find_library(${_var}
+    NAMES ${_names}
+    PATHS "/usr/lib/nvidia-current"
+    DOC ${_doc}
+    )
+endmacro()
+
+macro(cuda_find_library_local_first _var _names _doc)
+  cuda_find_library_local_first_with_path_ext( "${_var}" "${_names}" "${_doc}" "" )
+endmacro()
+
+macro(find_library_local_first _var _names _doc )
+  cuda_find_library_local_first( "${_var}" "${_names}" "${_doc}" "" )
+endmacro()
+
+
+# CUDA_LIBRARIES
+cuda_find_library_local_first(CUDA_CUDART_LIBRARY cudart "\"cudart\" library")
+if(CUDA_VERSION VERSION_EQUAL "3.0")
+  # The cudartemu library only existed for the 3.0 version of CUDA.
+  cuda_find_library_local_first(CUDA_CUDARTEMU_LIBRARY cudartemu "\"cudartemu\" library")
+  mark_as_advanced(
+    CUDA_CUDARTEMU_LIBRARY
+    )
+endif()
+if(NOT CUDA_VERSION VERSION_LESS "5.5")
+  cuda_find_library_local_first(CUDA_cudart_static_LIBRARY cudart_static "static CUDA runtime library")
+  mark_as_advanced(CUDA_cudart_static_LIBRARY)
+endif()
+if(CUDA_cudart_static_LIBRARY)
+  # Set whether to use the static cuda runtime.
+  option(CUDA_USE_STATIC_CUDA_RUNTIME "Use the static version of the CUDA runtime library if available" ON)
+else()
+  option(CUDA_USE_STATIC_CUDA_RUNTIME "Use the static version of the CUDA runtime library if available" OFF)
+endif()
+
+if(CUDA_USE_STATIC_CUDA_RUNTIME)
+  if(UNIX)
+    # Check for the dependent libraries.  Here we look for pthreads.
+    if (DEFINED CMAKE_THREAD_PREFER_PTHREAD)
+      set(_cuda_cmake_thread_prefer_pthread ${CMAKE_THREAD_PREFER_PTHREAD})
+    endif()
+    set(CMAKE_THREAD_PREFER_PTHREAD 1)
+
+    # Many of the FindXYZ CMake comes with makes use of try_compile with int main(){return 0;}
+    # as the source file.  Unfortunately this causes a warning with -Wstrict-prototypes and
+    # -Werror causes the try_compile to fail.  We will just temporarily disable other flags
+    # when doing the find_package command here.
+    set(_cuda_cmake_c_flags ${CMAKE_C_FLAGS})
+    set(CMAKE_C_FLAGS "-fPIC")
+    find_package(Threads REQUIRED)
+    set(CMAKE_C_FLAGS ${_cuda_cmake_c_flags})
+
+    if (DEFINED _cuda_cmake_thread_prefer_pthread)
+      set(CMAKE_THREAD_PREFER_PTHREAD ${_cuda_cmake_thread_prefer_pthread})
+      unset(_cuda_cmake_thread_prefer_pthread)
+    else()
+      unset(CMAKE_THREAD_PREFER_PTHREAD)
+    endif()
+    if (NOT APPLE)
+      # Here is librt that has things such as, clock_gettime, shm_open, and shm_unlink.
+      find_library(CUDA_rt_LIBRARY rt)
+      if (NOT CUDA_rt_LIBRARY)
+        message(WARNING "Expecting to find librt for libcudart_static, but didn't find it.")
+      endif()
+    endif()
+  endif()
+endif()
+
+# CUPTI library showed up in cuda toolkit 4.0
+if(NOT CUDA_VERSION VERSION_LESS "4.0")
+  cuda_find_library_local_first_with_path_ext(CUDA_cupti_LIBRARY cupti "\"cupti\" library" "extras/CUPTI/")
+  mark_as_advanced(CUDA_cupti_LIBRARY)
+endif()
+
+# Set the CUDA_LIBRARIES variable.  This is the set of stuff to link against if you are
+# using the CUDA runtime.  For the dynamic version of the runtime, most of the
+# dependencies are brough in, but for the static version there are additional libraries
+# and linker commands needed.
+# Initialize to empty
+set(CUDA_LIBRARIES)
+
+# If we are using emulation mode and we found the cudartemu library then use
+# that one instead of cudart.
+if(CUDA_BUILD_EMULATION AND CUDA_CUDARTEMU_LIBRARY)
+  list(APPEND CUDA_LIBRARIES ${CUDA_CUDARTEMU_LIBRARY})
+elseif(CUDA_USE_STATIC_CUDA_RUNTIME AND CUDA_cudart_static_LIBRARY)
+  list(APPEND CUDA_LIBRARIES ${CUDA_cudart_static_LIBRARY} ${CMAKE_THREAD_LIBS_INIT} ${CMAKE_DL_LIBS})
+  if (CUDA_rt_LIBRARY)
+    list(APPEND CUDA_LIBRARIES ${CUDA_rt_LIBRARY})
+  endif()
+  if(APPLE)
+    # We need to add the default path to the driver (libcuda.dylib) as an rpath, so that
+    # the static cuda runtime can find it at runtime.
+    list(APPEND CUDA_LIBRARIES -Wl,-rpath,/usr/local/cuda/lib)
+  endif()
+else()
+  list(APPEND CUDA_LIBRARIES ${CUDA_CUDART_LIBRARY})
+endif()
+
+# 1.1 toolkit on linux doesn't appear to have a separate library on
+# some platforms.
+cuda_find_library_local_first(CUDA_CUDA_LIBRARY cuda "\"cuda\" library (older versions only).")
+
+mark_as_advanced(
+  CUDA_CUDA_LIBRARY
+  CUDA_CUDART_LIBRARY
+  )
+
+#######################
+# Look for some of the toolkit helper libraries
+macro(FIND_CUDA_HELPER_LIBS _name)
+  cuda_find_library_local_first(CUDA_${_name}_LIBRARY ${_name} "\"${_name}\" library")
+  mark_as_advanced(CUDA_${_name}_LIBRARY)
+endmacro()
+
+#######################
+# Disable emulation for v3.1 onward
+if(CUDA_VERSION VERSION_GREATER "3.0")
+  if(CUDA_BUILD_EMULATION)
+    message(FATAL_ERROR "CUDA_BUILD_EMULATION is not supported in version 3.1 and onwards.  You must disable it to proceed.  You have version ${CUDA_VERSION}.")
+  endif()
+endif()
+
+# Search for additional CUDA toolkit libraries.
+if(CUDA_VERSION VERSION_LESS "3.1")
+  # Emulation libraries aren't available in version 3.1 onward.
+  find_cuda_helper_libs(cufftemu)
+  find_cuda_helper_libs(cublasemu)
+endif()
+find_cuda_helper_libs(cufft)
+find_cuda_helper_libs(cublas)
+if(NOT CUDA_VERSION VERSION_LESS "3.2")
+  # cusparse showed up in version 3.2
+  find_cuda_helper_libs(cusparse)
+  find_cuda_helper_libs(curand)
+  if (WIN32)
+    find_cuda_helper_libs(nvcuvenc)
+    find_cuda_helper_libs(nvcuvid)
+  endif()
+endif()
+if(CUDA_VERSION VERSION_GREATER "5.0")
+  find_cuda_helper_libs(cublas_device)
+  # In CUDA 5.5 NPP was splitted onto 3 separate libraries.
+  find_cuda_helper_libs(nppc)
+  find_cuda_helper_libs(nppi)
+  find_cuda_helper_libs(npps)
+  set(CUDA_npp_LIBRARY "${CUDA_nppc_LIBRARY};${CUDA_nppi_LIBRARY};${CUDA_npps_LIBRARY}")
+elseif(NOT CUDA_VERSION VERSION_LESS "4.0")
+  find_cuda_helper_libs(npp)
+endif()
+if(NOT CUDA_VERSION VERSION_LESS "7.0")
+  # cusolver showed up in version 7.0
+  find_cuda_helper_libs(cusolver)
+endif()
+
+if (CUDA_BUILD_EMULATION)
+  set(CUDA_CUFFT_LIBRARIES ${CUDA_cufftemu_LIBRARY})
+  set(CUDA_CUBLAS_LIBRARIES ${CUDA_cublasemu_LIBRARY})
+else()
+  set(CUDA_CUFFT_LIBRARIES ${CUDA_cufft_LIBRARY})
+  set(CUDA_CUBLAS_LIBRARIES ${CUDA_cublas_LIBRARY} ${CUDA_cublas_device_LIBRARY})
+endif()
+
+########################
+# Look for the SDK stuff.  As of CUDA 3.0 NVSDKCUDA_ROOT has been replaced with
+# NVSDKCOMPUTE_ROOT with the old CUDA C contents moved into the C subdirectory
+find_path(CUDA_SDK_ROOT_DIR common/inc/cutil.h
+ HINTS
+  "$ENV{NVSDKCOMPUTE_ROOT}/C"
+  ENV NVSDKCUDA_ROOT
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\NVIDIA Corporation\\Installed Products\\NVIDIA SDK 10\\Compute;InstallDir]"
+ PATHS
+  "/Developer/GPU\ Computing/C"
+  )
+
+# Keep the CUDA_SDK_ROOT_DIR first in order to be able to override the
+# environment variables.
+set(CUDA_SDK_SEARCH_PATH
+  "${CUDA_SDK_ROOT_DIR}"
+  "${CUDA_TOOLKIT_ROOT_DIR}/local/NVSDK0.2"
+  "${CUDA_TOOLKIT_ROOT_DIR}/NVSDK0.2"
+  "${CUDA_TOOLKIT_ROOT_DIR}/NV_CUDA_SDK"
+  "$ENV{HOME}/NVIDIA_CUDA_SDK"
+  "$ENV{HOME}/NVIDIA_CUDA_SDK_MACOSX"
+  "/Developer/CUDA"
+  )
+
+# Example of how to find an include file from the CUDA_SDK_ROOT_DIR
+
+# find_path(CUDA_CUT_INCLUDE_DIR
+#   cutil.h
+#   PATHS ${CUDA_SDK_SEARCH_PATH}
+#   PATH_SUFFIXES "common/inc"
+#   DOC "Location of cutil.h"
+#   NO_DEFAULT_PATH
+#   )
+# # Now search system paths
+# find_path(CUDA_CUT_INCLUDE_DIR cutil.h DOC "Location of cutil.h")
+
+# mark_as_advanced(CUDA_CUT_INCLUDE_DIR)
+
+
+# Example of how to find a library in the CUDA_SDK_ROOT_DIR
+
+# # cutil library is called cutil64 for 64 bit builds on windows.  We don't want
+# # to get these confused, so we are setting the name based on the word size of
+# # the build.
+
+# if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+#   set(cuda_cutil_name cutil64)
+# else()
+#   set(cuda_cutil_name cutil32)
+# endif()
+
+# find_library(CUDA_CUT_LIBRARY
+#   NAMES cutil ${cuda_cutil_name}
+#   PATHS ${CUDA_SDK_SEARCH_PATH}
+#   # The new version of the sdk shows up in common/lib, but the old one is in lib
+#   PATH_SUFFIXES "common/lib" "lib"
+#   DOC "Location of cutil library"
+#   NO_DEFAULT_PATH
+#   )
+# # Now search system paths
+# find_library(CUDA_CUT_LIBRARY NAMES cutil ${cuda_cutil_name} DOC "Location of cutil library")
+# mark_as_advanced(CUDA_CUT_LIBRARY)
+# set(CUDA_CUT_LIBRARIES ${CUDA_CUT_LIBRARY})
+
+
+
+#############################
+# Check for required components
+set(CUDA_FOUND TRUE)
+
+set(CUDA_TOOLKIT_ROOT_DIR_INTERNAL "${CUDA_TOOLKIT_ROOT_DIR}" CACHE INTERNAL
+  "This is the value of the last time CUDA_TOOLKIT_ROOT_DIR was set successfully." FORCE)
+set(CUDA_TOOLKIT_TARGET_DIR_INTERNAL "${CUDA_TOOLKIT_TARGET_DIR}" CACHE INTERNAL
+  "This is the value of the last time CUDA_TOOLKIT_TARGET_DIR was set successfully." FORCE)
+set(CUDA_SDK_ROOT_DIR_INTERNAL "${CUDA_SDK_ROOT_DIR}" CACHE INTERNAL
+  "This is the value of the last time CUDA_SDK_ROOT_DIR was set successfully." FORCE)
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(CUDA
+  REQUIRED_VARS
+    CUDA_TOOLKIT_ROOT_DIR
+    CUDA_NVCC_EXECUTABLE
+    CUDA_INCLUDE_DIRS
+    CUDA_CUDART_LIBRARY
+  VERSION_VAR
+    CUDA_VERSION
+  )
+
+
+
+###############################################################################
+###############################################################################
+# Macros
+###############################################################################
+###############################################################################
+
+###############################################################################
+# Add include directories to pass to the nvcc command.
+macro(CUDA_INCLUDE_DIRECTORIES)
+  foreach(dir ${ARGN})
+    list(APPEND CUDA_NVCC_INCLUDE_ARGS_USER -I${dir})
+  endforeach()
+endmacro()
+
+
+##############################################################################
+cuda_find_helper_file(parse_cubin cmake)
+cuda_find_helper_file(make2cmake cmake)
+cuda_find_helper_file(run_nvcc cmake)
+
+##############################################################################
+# Separate the OPTIONS out from the sources
+#
+macro(CUDA_GET_SOURCES_AND_OPTIONS _sources _cmake_options _options)
+  set( ${_sources} )
+  set( ${_cmake_options} )
+  set( ${_options} )
+  set( _found_options FALSE )
+  foreach(arg ${ARGN})
+    if("x${arg}" STREQUAL "xOPTIONS")
+      set( _found_options TRUE )
+    elseif(
+        "x${arg}" STREQUAL "xWIN32" OR
+        "x${arg}" STREQUAL "xMACOSX_BUNDLE" OR
+        "x${arg}" STREQUAL "xEXCLUDE_FROM_ALL" OR
+        "x${arg}" STREQUAL "xSTATIC" OR
+        "x${arg}" STREQUAL "xSHARED" OR
+        "x${arg}" STREQUAL "xMODULE"
+        )
+      list(APPEND ${_cmake_options} ${arg})
+    else()
+      if ( _found_options )
+        list(APPEND ${_options} ${arg})
+      else()
+        # Assume this is a file
+        list(APPEND ${_sources} ${arg})
+      endif()
+    endif()
+  endforeach()
+endmacro()
+
+##############################################################################
+# Parse the OPTIONS from ARGN and set the variables prefixed by _option_prefix
+#
+macro(CUDA_PARSE_NVCC_OPTIONS _option_prefix)
+  set( _found_config )
+  foreach(arg ${ARGN})
+    # Determine if we are dealing with a perconfiguration flag
+    foreach(config ${CUDA_configuration_types})
+      string(TOUPPER ${config} config_upper)
+      if (arg STREQUAL "${config_upper}")
+        set( _found_config _${arg})
+        # Set arg to nothing to keep it from being processed further
+        set( arg )
+      endif()
+    endforeach()
+
+    if ( arg )
+      list(APPEND ${_option_prefix}${_found_config} "${arg}")
+    endif()
+  endforeach()
+endmacro()
+
+##############################################################################
+# Helper to add the include directory for CUDA only once
+function(CUDA_ADD_CUDA_INCLUDE_ONCE)
+  get_directory_property(_include_directories INCLUDE_DIRECTORIES)
+  set(_add TRUE)
+  if(_include_directories)
+    foreach(dir ${_include_directories})
+      if("${dir}" STREQUAL "${CUDA_INCLUDE_DIRS}")
+        set(_add FALSE)
+      endif()
+    endforeach()
+  endif()
+  if(_add)
+    include_directories(${CUDA_INCLUDE_DIRS})
+  endif()
+endfunction()
+
+function(CUDA_BUILD_SHARED_LIBRARY shared_flag)
+  set(cmake_args ${ARGN})
+  # If SHARED, MODULE, or STATIC aren't already in the list of arguments, then
+  # add SHARED or STATIC based on the value of BUILD_SHARED_LIBS.
+  list(FIND cmake_args SHARED _cuda_found_SHARED)
+  list(FIND cmake_args MODULE _cuda_found_MODULE)
+  list(FIND cmake_args STATIC _cuda_found_STATIC)
+  if( _cuda_found_SHARED GREATER -1 OR
+      _cuda_found_MODULE GREATER -1 OR
+      _cuda_found_STATIC GREATER -1)
+    set(_cuda_build_shared_libs)
+  else()
+    if (BUILD_SHARED_LIBS)
+      set(_cuda_build_shared_libs SHARED)
+    else()
+      set(_cuda_build_shared_libs STATIC)
+    endif()
+  endif()
+  set(${shared_flag} ${_cuda_build_shared_libs} PARENT_SCOPE)
+endfunction()
+
+##############################################################################
+# Helper to avoid clashes of files with the same basename but different paths.
+# This doesn't attempt to do exactly what CMake internals do, which is to only
+# add this path when there is a conflict, since by the time a second collision
+# in names is detected it's already too late to fix the first one.  For
+# consistency sake the relative path will be added to all files.
+function(CUDA_COMPUTE_BUILD_PATH path build_path)
+  #message("CUDA_COMPUTE_BUILD_PATH([${path}] ${build_path})")
+  # Only deal with CMake style paths from here on out
+  file(TO_CMAKE_PATH "${path}" bpath)
+  if (IS_ABSOLUTE "${bpath}")
+    # Absolute paths are generally unnessary, especially if something like
+    # file(GLOB_RECURSE) is used to pick up the files.
+
+    string(FIND "${bpath}" "${CMAKE_CURRENT_BINARY_DIR}" _binary_dir_pos)
+    if (_binary_dir_pos EQUAL 0)
+      file(RELATIVE_PATH bpath "${CMAKE_CURRENT_BINARY_DIR}" "${bpath}")
+    else()
+      file(RELATIVE_PATH bpath "${CMAKE_CURRENT_SOURCE_DIR}" "${bpath}")
+    endif()
+  endif()
+
+  # This recipe is from cmLocalGenerator::CreateSafeUniqueObjectFileName in the
+  # CMake source.
+
+  # Remove leading /
+  string(REGEX REPLACE "^[/]+" "" bpath "${bpath}")
+  # Avoid absolute paths by removing ':'
+  string(REPLACE ":" "_" bpath "${bpath}")
+  # Avoid relative paths that go up the tree
+  string(REPLACE "../" "__/" bpath "${bpath}")
+  # Avoid spaces
+  string(REPLACE " " "_" bpath "${bpath}")
+
+  # Strip off the filename.  I wait until here to do it, since removin the
+  # basename can make a path that looked like path/../basename turn into
+  # path/.. (notice the trailing slash).
+  get_filename_component(bpath "${bpath}" PATH)
+
+  set(${build_path} "${bpath}" PARENT_SCOPE)
+  #message("${build_path} = ${bpath}")
+endfunction()
+
+##############################################################################
+# This helper macro populates the following variables and setups up custom
+# commands and targets to invoke the nvcc compiler to generate C or PTX source
+# dependent upon the format parameter.  The compiler is invoked once with -M
+# to generate a dependency file and a second time with -cuda or -ptx to generate
+# a .cpp or .ptx file.
+# INPUT:
+#   cuda_target         - Target name
+#   format              - PTX, CUBIN, FATBIN or OBJ
+#   FILE1 .. FILEN      - The remaining arguments are the sources to be wrapped.
+#   OPTIONS             - Extra options to NVCC
+# OUTPUT:
+#   generated_files     - List of generated files
+##############################################################################
+##############################################################################
+
+macro(CUDA_WRAP_SRCS cuda_target format generated_files)
+
+  # If CMake doesn't support separable compilation, complain
+  if(CUDA_SEPARABLE_COMPILATION AND CMAKE_VERSION VERSION_LESS "2.8.10.1")
+    message(SEND_ERROR "CUDA_SEPARABLE_COMPILATION isn't supported for CMake versions less than 2.8.10.1")
+  endif()
+
+  # Set up all the command line flags here, so that they can be overridden on a per target basis.
+
+  set(nvcc_flags "")
+
+  # Emulation if the card isn't present.
+  if (CUDA_BUILD_EMULATION)
+    # Emulation.
+    set(nvcc_flags ${nvcc_flags} --device-emulation -D_DEVICEEMU -g)
+  else()
+    # Device mode.  No flags necessary.
+  endif()
+
+  if(CUDA_HOST_COMPILATION_CPP)
+    set(CUDA_C_OR_CXX CXX)
+  else()
+    if(CUDA_VERSION VERSION_LESS "3.0")
+      set(nvcc_flags ${nvcc_flags} --host-compilation C)
+    else()
+      message(WARNING "--host-compilation flag is deprecated in CUDA version >= 3.0.  Removing --host-compilation C flag" )
+    endif()
+    set(CUDA_C_OR_CXX C)
+  endif()
+
+  set(generated_extension ${CMAKE_${CUDA_C_OR_CXX}_OUTPUT_EXTENSION})
+
+  if(CUDA_64_BIT_DEVICE_CODE)
+    set(nvcc_flags ${nvcc_flags} -m64)
+  else()
+    set(nvcc_flags ${nvcc_flags} -m32)
+  endif()
+
+  if(CUDA_TARGET_CPU_ARCH)
+    set(nvcc_flags ${nvcc_flags} "--target-cpu-architecture=${CUDA_TARGET_CPU_ARCH}")
+  endif()
+
+  # This needs to be passed in at this stage, because VS needs to fill out the
+  # value of VCInstallDir from within VS.  Note that CCBIN is only used if
+  # -ccbin or --compiler-bindir isn't used and CUDA_HOST_COMPILER matches
+  # $(VCInstallDir)/bin.
+  if(CMAKE_GENERATOR MATCHES "Visual Studio")
+    set(ccbin_flags -D "\"CCBIN:PATH=$(VCInstallDir)bin\"" )
+  else()
+    set(ccbin_flags)
+  endif()
+
+  # Figure out which configure we will use and pass that in as an argument to
+  # the script.  We need to defer the decision until compilation time, because
+  # for VS projects we won't know if we are making a debug or release build
+  # until build time.
+  if(CMAKE_GENERATOR MATCHES "Visual Studio")
+    set( CUDA_build_configuration "$(ConfigurationName)" )
+  else()
+    set( CUDA_build_configuration "${CMAKE_BUILD_TYPE}")
+  endif()
+
+  # Initialize our list of includes with the user ones followed by the CUDA system ones.
+  set(CUDA_NVCC_INCLUDE_ARGS ${CUDA_NVCC_INCLUDE_ARGS_USER} "-I${CUDA_INCLUDE_DIRS}")
+  # Get the include directories for this directory and use them for our nvcc command.
+  # Remove duplicate entries which may be present since include_directories
+  # in CMake >= 2.8.8 does not remove them.
+  get_directory_property(CUDA_NVCC_INCLUDE_DIRECTORIES INCLUDE_DIRECTORIES)
+  list(REMOVE_DUPLICATES CUDA_NVCC_INCLUDE_DIRECTORIES)
+  if(CUDA_NVCC_INCLUDE_DIRECTORIES)
+    foreach(dir ${CUDA_NVCC_INCLUDE_DIRECTORIES})
+      list(APPEND CUDA_NVCC_INCLUDE_ARGS -I${dir})
+    endforeach()
+  endif()
+
+  # Reset these variables
+  set(CUDA_WRAP_OPTION_NVCC_FLAGS)
+  foreach(config ${CUDA_configuration_types})
+    string(TOUPPER ${config} config_upper)
+    set(CUDA_WRAP_OPTION_NVCC_FLAGS_${config_upper})
+  endforeach()
+
+  CUDA_GET_SOURCES_AND_OPTIONS(_cuda_wrap_sources _cuda_wrap_cmake_options _cuda_wrap_options ${ARGN})
+  CUDA_PARSE_NVCC_OPTIONS(CUDA_WRAP_OPTION_NVCC_FLAGS ${_cuda_wrap_options})
+
+  # Figure out if we are building a shared library.  BUILD_SHARED_LIBS is
+  # respected in CUDA_ADD_LIBRARY.
+  set(_cuda_build_shared_libs FALSE)
+  # SHARED, MODULE
+  list(FIND _cuda_wrap_cmake_options SHARED _cuda_found_SHARED)
+  list(FIND _cuda_wrap_cmake_options MODULE _cuda_found_MODULE)
+  if(_cuda_found_SHARED GREATER -1 OR _cuda_found_MODULE GREATER -1)
+    set(_cuda_build_shared_libs TRUE)
+  endif()
+  # STATIC
+  list(FIND _cuda_wrap_cmake_options STATIC _cuda_found_STATIC)
+  if(_cuda_found_STATIC GREATER -1)
+    set(_cuda_build_shared_libs FALSE)
+  endif()
+
+  # CUDA_HOST_FLAGS
+  if(_cuda_build_shared_libs)
+    # If we are setting up code for a shared library, then we need to add extra flags for
+    # compiling objects for shared libraries.
+    set(CUDA_HOST_SHARED_FLAGS ${CMAKE_SHARED_LIBRARY_${CUDA_C_OR_CXX}_FLAGS})
+  else()
+    set(CUDA_HOST_SHARED_FLAGS)
+  endif()
+  # Only add the CMAKE_{C,CXX}_FLAGS if we are propagating host flags.  We
+  # always need to set the SHARED_FLAGS, though.
+  if(CUDA_PROPAGATE_HOST_FLAGS)
+    set(_cuda_host_flags "set(CMAKE_HOST_FLAGS ${CMAKE_${CUDA_C_OR_CXX}_FLAGS} ${CUDA_HOST_SHARED_FLAGS})")
+  else()
+    set(_cuda_host_flags "set(CMAKE_HOST_FLAGS ${CUDA_HOST_SHARED_FLAGS})")
+  endif()
+
+  set(_cuda_nvcc_flags_config "# Build specific configuration flags")
+  # Loop over all the configuration types to generate appropriate flags for run_nvcc.cmake
+  foreach(config ${CUDA_configuration_types})
+    string(TOUPPER ${config} config_upper)
+    # CMAKE_FLAGS are strings and not lists.  By not putting quotes around CMAKE_FLAGS
+    # we convert the strings to lists (like we want).
+
+    if(CUDA_PROPAGATE_HOST_FLAGS)
+      # nvcc chokes on -g3 in versions previous to 3.0, so replace it with -g
+      set(_cuda_fix_g3 FALSE)
+
+      if(CMAKE_COMPILER_IS_GNUCC)
+        if (CUDA_VERSION VERSION_LESS  "3.0" OR
+            CUDA_VERSION VERSION_EQUAL "4.1" OR
+            CUDA_VERSION VERSION_EQUAL "4.2"
+            )
+          set(_cuda_fix_g3 TRUE)
+        endif()
+      endif()
+      if(_cuda_fix_g3)
+        string(REPLACE "-g3" "-g" _cuda_C_FLAGS "${CMAKE_${CUDA_C_OR_CXX}_FLAGS_${config_upper}}")
+      else()
+        set(_cuda_C_FLAGS "${CMAKE_${CUDA_C_OR_CXX}_FLAGS_${config_upper}}")
+      endif()
+
+      set(_cuda_host_flags "${_cuda_host_flags}\nset(CMAKE_HOST_FLAGS_${config_upper} ${_cuda_C_FLAGS})")
+    endif()
+
+    # Note that if we ever want CUDA_NVCC_FLAGS_<CONFIG> to be string (instead of a list
+    # like it is currently), we can remove the quotes around the
+    # ${CUDA_NVCC_FLAGS_${config_upper}} variable like the CMAKE_HOST_FLAGS_<CONFIG> variable.
+    set(_cuda_nvcc_flags_config "${_cuda_nvcc_flags_config}\nset(CUDA_NVCC_FLAGS_${config_upper} ${CUDA_NVCC_FLAGS_${config_upper}} ;; ${CUDA_WRAP_OPTION_NVCC_FLAGS_${config_upper}})")
+  endforeach()
+
+  # Process the C++11 flag.  If the host sets the flag, we need to add it to nvcc and
+  # remove it from the host. This is because -Xcompile -std=c++ will choke nvcc (it uses
+  # the C preprocessor).  In order to get this to work correctly, we need to use nvcc's
+  # specific c++11 flag.
+  if( "${_cuda_host_flags}" MATCHES "-std=c\\+\\+11")
+    # Add the c++11 flag to nvcc if it isn't already present.  Note that we only look at
+    # the main flag instead of the configuration specific flags.
+    if( NOT "${CUDA_NVCC_FLAGS}" MATCHES "-std;c\\+\\+11" )
+      list(APPEND nvcc_flags --std c++11)
+    endif()
+    string(REGEX REPLACE "[-]+std=c\\+\\+11" "" _cuda_host_flags "${_cuda_host_flags}")
+  endif()
+
+  # Get the list of definitions from the directory property
+  get_directory_property(CUDA_NVCC_DEFINITIONS COMPILE_DEFINITIONS)
+  if(CUDA_NVCC_DEFINITIONS)
+    foreach(_definition ${CUDA_NVCC_DEFINITIONS})
+      list(APPEND nvcc_flags "-D${_definition}")
+    endforeach()
+  endif()
+
+  if(_cuda_build_shared_libs)
+    list(APPEND nvcc_flags "-D${cuda_target}_EXPORTS")
+  endif()
+
+  # Reset the output variable
+  set(_cuda_wrap_generated_files "")
+
+  # Iterate over the macro arguments and create custom
+  # commands for all the .cu files.
+  foreach(file ${ARGN})
+    # Ignore any file marked as a HEADER_FILE_ONLY
+    get_source_file_property(_is_header ${file} HEADER_FILE_ONLY)
+    # Allow per source file overrides of the format.  Also allows compiling non-.cu files.
+    get_source_file_property(_cuda_source_format ${file} CUDA_SOURCE_PROPERTY_FORMAT)
+    if((${file} MATCHES "\\.cu$" OR _cuda_source_format) AND NOT _is_header)
+
+      if(NOT _cuda_source_format)
+        set(_cuda_source_format ${format})
+      endif()
+      # If file isn't a .cu file, we need to tell nvcc to treat it as such.
+      if(NOT ${file} MATCHES "\\.cu$")
+        set(cuda_language_flag -x=cu)
+      else()
+        set(cuda_language_flag)
+      endif()
+
+      if( ${_cuda_source_format} MATCHES "OBJ")
+        set( cuda_compile_to_external_module OFF )
+      else()
+        set( cuda_compile_to_external_module ON )
+        if( ${_cuda_source_format} MATCHES "PTX" )
+          set( cuda_compile_to_external_module_type "ptx" )
+        elseif( ${_cuda_source_format} MATCHES "CUBIN")
+          set( cuda_compile_to_external_module_type "cubin" )
+        elseif( ${_cuda_source_format} MATCHES "FATBIN")
+          set( cuda_compile_to_external_module_type "fatbin" )
+        else()
+          message( FATAL_ERROR "Invalid format flag passed to CUDA_WRAP_SRCS or set with CUDA_SOURCE_PROPERTY_FORMAT file property for file '${file}': '${_cuda_source_format}'.  Use OBJ, PTX, CUBIN or FATBIN.")
+        endif()
+      endif()
+
+      if(cuda_compile_to_external_module)
+        # Don't use any of the host compilation flags for PTX targets.
+        set(CUDA_HOST_FLAGS)
+        set(CUDA_NVCC_FLAGS_CONFIG)
+      else()
+        set(CUDA_HOST_FLAGS ${_cuda_host_flags})
+        set(CUDA_NVCC_FLAGS_CONFIG ${_cuda_nvcc_flags_config})
+      endif()
+
+      # Determine output directory
+      cuda_compute_build_path("${file}" cuda_build_path)
+      set(cuda_compile_intermediate_directory "${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/${cuda_target}.dir/${cuda_build_path}")
+      if(CUDA_GENERATED_OUTPUT_DIR)
+        set(cuda_compile_output_dir "${CUDA_GENERATED_OUTPUT_DIR}")
+      else()
+        if ( cuda_compile_to_external_module )
+          set(cuda_compile_output_dir "${CMAKE_CURRENT_BINARY_DIR}")
+        else()
+          set(cuda_compile_output_dir "${cuda_compile_intermediate_directory}")
+        endif()
+      endif()
+
+      # Add a custom target to generate a c or ptx file. ######################
+
+      get_filename_component( basename ${file} NAME )
+      if( cuda_compile_to_external_module )
+        set(generated_file_path "${cuda_compile_output_dir}")
+        set(generated_file_basename "${cuda_target}_generated_${basename}.${cuda_compile_to_external_module_type}")
+        set(format_flag "-${cuda_compile_to_external_module_type}")
+        file(MAKE_DIRECTORY "${cuda_compile_output_dir}")
+      else()
+        set(generated_file_path "${cuda_compile_output_dir}/${CMAKE_CFG_INTDIR}")
+        set(generated_file_basename "${cuda_target}_generated_${basename}${generated_extension}")
+        if(CUDA_SEPARABLE_COMPILATION)
+          set(format_flag "-dc")
+        else()
+          set(format_flag "-c")
+        endif()
+      endif()
+
+      # Set all of our file names.  Make sure that whatever filenames that have
+      # generated_file_path in them get passed in through as a command line
+      # argument, so that the ${CMAKE_CFG_INTDIR} gets expanded at run time
+      # instead of configure time.
+      set(generated_file "${generated_file_path}/${generated_file_basename}")
+      set(cmake_dependency_file "${cuda_compile_intermediate_directory}/${generated_file_basename}.depend")
+      set(NVCC_generated_dependency_file "${cuda_compile_intermediate_directory}/${generated_file_basename}.NVCC-depend")
+      set(generated_cubin_file "${generated_file_path}/${generated_file_basename}.cubin.txt")
+      set(custom_target_script_pregen "${cuda_compile_intermediate_directory}/${generated_file_basename}.cmake.pre-gen")
+      set(custom_target_script "${cuda_compile_intermediate_directory}/${generated_file_basename}$<$<BOOL:$<CONFIG>>:.$<CONFIG>>.cmake")
+
+      # Setup properties for obj files:
+      if( NOT cuda_compile_to_external_module )
+        set_source_files_properties("${generated_file}"
+          PROPERTIES
+          EXTERNAL_OBJECT true # This is an object file not to be compiled, but only be linked.
+          )
+      endif()
+
+      # Don't add CMAKE_CURRENT_SOURCE_DIR if the path is already an absolute path.
+      get_filename_component(file_path "${file}" PATH)
+      if(IS_ABSOLUTE "${file_path}")
+        set(source_file "${file}")
+      else()
+        set(source_file "${CMAKE_CURRENT_SOURCE_DIR}/${file}")
+      endif()
+
+      if( NOT cuda_compile_to_external_module AND CUDA_SEPARABLE_COMPILATION)
+        list(APPEND ${cuda_target}_SEPARABLE_COMPILATION_OBJECTS "${generated_file}")
+      endif()
+
+      # Bring in the dependencies.  Creates a variable CUDA_NVCC_DEPEND #######
+      cuda_include_nvcc_dependencies(${cmake_dependency_file})
+
+      # Convience string for output ###########################################
+      if(CUDA_BUILD_EMULATION)
+        set(cuda_build_type "Emulation")
+      else()
+        set(cuda_build_type "Device")
+      endif()
+
+      # Build the NVCC made dependency file ###################################
+      set(build_cubin OFF)
+      if ( NOT CUDA_BUILD_EMULATION AND CUDA_BUILD_CUBIN )
+         if ( NOT cuda_compile_to_external_module )
+           set ( build_cubin ON )
+         endif()
+      endif()
+
+      # Configure the build script
+      configure_file("${CUDA_run_nvcc}" "${custom_target_script_pregen}" @ONLY)
+      file(GENERATE
+        OUTPUT "${custom_target_script}"
+        INPUT "${custom_target_script_pregen}"
+        )
+
+      # So if a user specifies the same cuda file as input more than once, you
+      # can have bad things happen with dependencies.  Here we check an option
+      # to see if this is the behavior they want.
+      if(CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE)
+        set(main_dep MAIN_DEPENDENCY ${source_file})
+      else()
+        set(main_dep DEPENDS ${source_file})
+      endif()
+
+      if(CUDA_VERBOSE_BUILD)
+        set(verbose_output ON)
+      elseif(CMAKE_GENERATOR MATCHES "Makefiles")
+        set(verbose_output "$(VERBOSE)")
+      else()
+        set(verbose_output OFF)
+      endif()
+
+      # Create up the comment string
+      file(RELATIVE_PATH generated_file_relative_path "${CMAKE_BINARY_DIR}" "${generated_file}")
+      if(cuda_compile_to_external_module)
+        set(cuda_build_comment_string "Building NVCC ${cuda_compile_to_external_module_type} file ${generated_file_relative_path}")
+      else()
+        set(cuda_build_comment_string "Building NVCC (${cuda_build_type}) object ${generated_file_relative_path}")
+      endif()
+
+      set(_verbatim VERBATIM)
+      if(ccbin_flags MATCHES "\\$\\(VCInstallDir\\)")
+        set(_verbatim "")
+      endif()
+
+      # Build the generated file and dependency file ##########################
+      add_custom_command(
+        OUTPUT ${generated_file}
+        # These output files depend on the source_file and the contents of cmake_dependency_file
+        ${main_dep}
+        DEPENDS ${CUDA_NVCC_DEPEND}
+        DEPENDS ${custom_target_script}
+        # Make sure the output directory exists before trying to write to it.
+        COMMAND ${CMAKE_COMMAND} -E make_directory "${generated_file_path}"
+        COMMAND ${CMAKE_COMMAND} ARGS
+          -D verbose:BOOL=${verbose_output}
+          ${ccbin_flags}
+          -D build_configuration:STRING=${CUDA_build_configuration}
+          -D "generated_file:STRING=${generated_file}"
+          -D "generated_cubin_file:STRING=${generated_cubin_file}"
+          -P "${custom_target_script}"
+        WORKING_DIRECTORY "${cuda_compile_intermediate_directory}"
+        COMMENT "${cuda_build_comment_string}"
+        ${_verbatim}
+        )
+
+      # Make sure the build system knows the file is generated.
+      set_source_files_properties(${generated_file} PROPERTIES GENERATED TRUE)
+
+      list(APPEND _cuda_wrap_generated_files ${generated_file})
+
+      # Add the other files that we want cmake to clean on a cleanup ##########
+      list(APPEND CUDA_ADDITIONAL_CLEAN_FILES "${cmake_dependency_file}")
+      list(REMOVE_DUPLICATES CUDA_ADDITIONAL_CLEAN_FILES)
+      set(CUDA_ADDITIONAL_CLEAN_FILES ${CUDA_ADDITIONAL_CLEAN_FILES} CACHE INTERNAL "List of intermediate files that are part of the cuda dependency scanning.")
+
+    endif()
+  endforeach()
+
+  # Set the return parameter
+  set(${generated_files} ${_cuda_wrap_generated_files})
+endmacro()
+
+function(_cuda_get_important_host_flags important_flags flag_string)
+  if(CMAKE_GENERATOR MATCHES "Visual Studio")
+    string(REGEX MATCHALL "/M[DT][d]?" flags "${flag_string}")
+    list(APPEND ${important_flags} ${flags})
+  else()
+    string(REGEX MATCHALL "-fPIC" flags "${flag_string}")
+    list(APPEND ${important_flags} ${flags})
+  endif()
+  set(${important_flags} ${${important_flags}} PARENT_SCOPE)
+endfunction()
+
+###############################################################################
+###############################################################################
+# Separable Compilation Link
+###############################################################################
+###############################################################################
+
+# Compute the filename to be used by CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS
+function(CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME output_file_var cuda_target object_files)
+  if (object_files)
+    set(generated_extension ${CMAKE_${CUDA_C_OR_CXX}_OUTPUT_EXTENSION})
+    set(output_file "${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/${cuda_target}.dir/${CMAKE_CFG_INTDIR}/${cuda_target}_intermediate_link${generated_extension}")
+  else()
+    set(output_file)
+  endif()
+
+  set(${output_file_var} "${output_file}" PARENT_SCOPE)
+endfunction()
+
+# Setup the build rule for the separable compilation intermediate link file.
+function(CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS output_file cuda_target options object_files)
+  if (object_files)
+
+    set_source_files_properties("${output_file}"
+      PROPERTIES
+      EXTERNAL_OBJECT TRUE # This is an object file not to be compiled, but only
+                           # be linked.
+      GENERATED TRUE       # This file is generated during the build
+      )
+
+    # For now we are ignoring all the configuration specific flags.
+    set(nvcc_flags)
+    CUDA_PARSE_NVCC_OPTIONS(nvcc_flags ${options})
+    if(CUDA_64_BIT_DEVICE_CODE)
+      list(APPEND nvcc_flags -m64)
+    else()
+      list(APPEND nvcc_flags -m32)
+    endif()
+    # If -ccbin, --compiler-bindir has been specified, don't do anything.  Otherwise add it here.
+    list( FIND nvcc_flags "-ccbin" ccbin_found0 )
+    list( FIND nvcc_flags "--compiler-bindir" ccbin_found1 )
+    if( ccbin_found0 LESS 0 AND ccbin_found1 LESS 0 AND CUDA_HOST_COMPILER )
+      # Match VERBATIM check below.
+      if(CUDA_HOST_COMPILER MATCHES "\\$\\(VCInstallDir\\)")
+        list(APPEND nvcc_flags -ccbin "\"${CUDA_HOST_COMPILER}\"")
+      else()
+        list(APPEND nvcc_flags -ccbin "${CUDA_HOST_COMPILER}")
+      endif()
+    endif()
+
+    # Create a list of flags specified by CUDA_NVCC_FLAGS_${CONFIG} and CMAKE_${CUDA_C_OR_CXX}_FLAGS*
+    set(config_specific_flags)
+    set(flags)
+    foreach(config ${CUDA_configuration_types})
+      string(TOUPPER ${config} config_upper)
+      # Add config specific flags
+      foreach(f ${CUDA_NVCC_FLAGS_${config_upper}})
+        list(APPEND config_specific_flags $<$<CONFIG:${config}>:${f}>)
+      endforeach()
+      set(important_host_flags)
+      _cuda_get_important_host_flags(important_host_flags "${CMAKE_${CUDA_C_OR_CXX}_FLAGS_${config_upper}}")
+      foreach(f ${important_host_flags})
+        list(APPEND flags $<$<CONFIG:${config}>:-Xcompiler> $<$<CONFIG:${config}>:${f}>)
+      endforeach()
+    endforeach()
+    # Add CMAKE_${CUDA_C_OR_CXX}_FLAGS
+    set(important_host_flags)
+    _cuda_get_important_host_flags(important_host_flags "${CMAKE_${CUDA_C_OR_CXX}_FLAGS}")
+    foreach(f ${important_host_flags})
+      list(APPEND flags -Xcompiler ${f})
+    endforeach()
+
+    # Add our general CUDA_NVCC_FLAGS with the configuration specifig flags
+    set(nvcc_flags ${CUDA_NVCC_FLAGS} ${config_specific_flags} ${nvcc_flags})
+
+    file(RELATIVE_PATH output_file_relative_path "${CMAKE_BINARY_DIR}" "${output_file}")
+
+    # Some generators don't handle the multiple levels of custom command
+    # dependencies correctly (obj1 depends on file1, obj2 depends on obj1), so
+    # we work around that issue by compiling the intermediate link object as a
+    # pre-link custom command in that situation.
+    set(do_obj_build_rule TRUE)
+    if (MSVC_VERSION GREATER 1599 AND MSVC_VERSION LESS 1800)
+      # VS 2010 and 2012 have this problem.
+      set(do_obj_build_rule FALSE)
+    endif()
+
+    set(_verbatim VERBATIM)
+    if(nvcc_flags MATCHES "\\$\\(VCInstallDir\\)")
+      set(_verbatim "")
+    endif()
+
+    if (do_obj_build_rule)
+      add_custom_command(
+        OUTPUT ${output_file}
+        DEPENDS ${object_files}
+        COMMAND ${CUDA_NVCC_EXECUTABLE} ${nvcc_flags} -dlink ${object_files} -o ${output_file}
+        ${flags}
+        COMMENT "Building NVCC intermediate link file ${output_file_relative_path}"
+        ${_verbatim}
+        )
+    else()
+      get_filename_component(output_file_dir "${output_file}" DIRECTORY)
+      add_custom_command(
+        TARGET ${cuda_target}
+        PRE_LINK
+        COMMAND ${CMAKE_COMMAND} -E echo "Building NVCC intermediate link file ${output_file_relative_path}"
+        COMMAND ${CMAKE_COMMAND} -E make_directory "${output_file_dir}"
+        COMMAND ${CUDA_NVCC_EXECUTABLE} ${nvcc_flags} ${flags} -dlink ${object_files} -o "${output_file}"
+        ${_verbatim}
+        )
+    endif()
+ endif()
+endfunction()
+
+###############################################################################
+###############################################################################
+# ADD LIBRARY
+###############################################################################
+###############################################################################
+macro(CUDA_ADD_LIBRARY cuda_target)
+
+  CUDA_ADD_CUDA_INCLUDE_ONCE()
+
+  # Separate the sources from the options
+  CUDA_GET_SOURCES_AND_OPTIONS(_sources _cmake_options _options ${ARGN})
+  CUDA_BUILD_SHARED_LIBRARY(_cuda_shared_flag ${ARGN})
+  # Create custom commands and targets for each file.
+  CUDA_WRAP_SRCS( ${cuda_target} OBJ _generated_files ${_sources}
+    ${_cmake_options} ${_cuda_shared_flag}
+    OPTIONS ${_options} )
+
+  # Compute the file name of the intermedate link file used for separable
+  # compilation.
+  CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME(link_file ${cuda_target} "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
+
+  # Add the library.
+  add_library(${cuda_target} ${_cmake_options}
+    ${_generated_files}
+    ${_sources}
+    ${link_file}
+    )
+
+  # Add a link phase for the separable compilation if it has been enabled.  If
+  # it has been enabled then the ${cuda_target}_SEPARABLE_COMPILATION_OBJECTS
+  # variable will have been defined.
+  CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS("${link_file}" ${cuda_target} "${_options}" "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
+
+  target_link_libraries(${cuda_target}
+    ${CUDA_LIBRARIES}
+    )
+
+  # We need to set the linker language based on what the expected generated file
+  # would be. CUDA_C_OR_CXX is computed based on CUDA_HOST_COMPILATION_CPP.
+  set_target_properties(${cuda_target}
+    PROPERTIES
+    LINKER_LANGUAGE ${CUDA_C_OR_CXX}
+    )
+
+endmacro()
+
+
+###############################################################################
+###############################################################################
+# ADD EXECUTABLE
+###############################################################################
+###############################################################################
+macro(CUDA_ADD_EXECUTABLE cuda_target)
+
+  CUDA_ADD_CUDA_INCLUDE_ONCE()
+
+  # Separate the sources from the options
+  CUDA_GET_SOURCES_AND_OPTIONS(_sources _cmake_options _options ${ARGN})
+  # Create custom commands and targets for each file.
+  CUDA_WRAP_SRCS( ${cuda_target} OBJ _generated_files ${_sources} OPTIONS ${_options} )
+
+  # Compute the file name of the intermedate link file used for separable
+  # compilation.
+  CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME(link_file ${cuda_target} "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
+
+  # Add the library.
+  add_executable(${cuda_target} ${_cmake_options}
+    ${_generated_files}
+    ${_sources}
+    ${link_file}
+    )
+
+  # Add a link phase for the separable compilation if it has been enabled.  If
+  # it has been enabled then the ${cuda_target}_SEPARABLE_COMPILATION_OBJECTS
+  # variable will have been defined.
+  CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS("${link_file}" ${cuda_target} "${_options}" "${${cuda_target}_SEPARABLE_COMPILATION_OBJECTS}")
+
+  target_link_libraries(${cuda_target}
+    ${CUDA_LIBRARIES}
+    )
+
+  # We need to set the linker language based on what the expected generated file
+  # would be. CUDA_C_OR_CXX is computed based on CUDA_HOST_COMPILATION_CPP.
+  set_target_properties(${cuda_target}
+    PROPERTIES
+    LINKER_LANGUAGE ${CUDA_C_OR_CXX}
+    )
+
+endmacro()
+
+
+###############################################################################
+###############################################################################
+# (Internal) helper for manually added cuda source files with specific targets
+###############################################################################
+###############################################################################
+macro(cuda_compile_base cuda_target format generated_files)
+
+  # Separate the sources from the options
+  CUDA_GET_SOURCES_AND_OPTIONS(_sources _cmake_options _options ${ARGN})
+  # Create custom commands and targets for each file.
+  CUDA_WRAP_SRCS( ${cuda_target} ${format} _generated_files ${_sources} ${_cmake_options}
+    OPTIONS ${_options} )
+
+  set( ${generated_files} ${_generated_files})
+
+endmacro()
+
+###############################################################################
+###############################################################################
+# CUDA COMPILE
+###############################################################################
+###############################################################################
+macro(CUDA_COMPILE generated_files)
+  cuda_compile_base(cuda_compile OBJ ${generated_files} ${ARGN})
+endmacro()
+
+###############################################################################
+###############################################################################
+# CUDA COMPILE PTX
+###############################################################################
+###############################################################################
+macro(CUDA_COMPILE_PTX generated_files)
+  cuda_compile_base(cuda_compile_ptx PTX ${generated_files} ${ARGN})
+endmacro()
+
+###############################################################################
+###############################################################################
+# CUDA COMPILE FATBIN
+###############################################################################
+###############################################################################
+macro(CUDA_COMPILE_FATBIN generated_files)
+  cuda_compile_base(cuda_compile_fatbin FATBIN ${generated_files} ${ARGN})
+endmacro()
+
+###############################################################################
+###############################################################################
+# CUDA COMPILE CUBIN
+###############################################################################
+###############################################################################
+macro(CUDA_COMPILE_CUBIN generated_files)
+  cuda_compile_base(cuda_compile_cubin CUBIN ${generated_files} ${ARGN})
+endmacro()
+
+
+###############################################################################
+###############################################################################
+# CUDA ADD CUFFT TO TARGET
+###############################################################################
+###############################################################################
+macro(CUDA_ADD_CUFFT_TO_TARGET target)
+  if (CUDA_BUILD_EMULATION)
+    target_link_libraries(${target} ${CUDA_cufftemu_LIBRARY})
+  else()
+    target_link_libraries(${target} ${CUDA_cufft_LIBRARY})
+  endif()
+endmacro()
+
+###############################################################################
+###############################################################################
+# CUDA ADD CUBLAS TO TARGET
+###############################################################################
+###############################################################################
+macro(CUDA_ADD_CUBLAS_TO_TARGET target)
+  if (CUDA_BUILD_EMULATION)
+    target_link_libraries(${target} ${CUDA_cublasemu_LIBRARY})
+  else()
+    target_link_libraries(${target} ${CUDA_cublas_LIBRARY} ${CUDA_cublas_device_LIBRARY})
+  endif()
+endmacro()
+
+###############################################################################
+###############################################################################
+# CUDA BUILD CLEAN TARGET
+###############################################################################
+###############################################################################
+macro(CUDA_BUILD_CLEAN_TARGET)
+  # Call this after you add all your CUDA targets, and you will get a convience
+  # target.  You should also make clean after running this target to get the
+  # build system to generate all the code again.
+
+  set(cuda_clean_target_name clean_cuda_depends)
+  if (CMAKE_GENERATOR MATCHES "Visual Studio")
+    string(TOUPPER ${cuda_clean_target_name} cuda_clean_target_name)
+  endif()
+  add_custom_target(${cuda_clean_target_name}
+    COMMAND ${CMAKE_COMMAND} -E remove ${CUDA_ADDITIONAL_CLEAN_FILES})
+
+  # Clear out the variable, so the next time we configure it will be empty.
+  # This is useful so that the files won't persist in the list after targets
+  # have been removed.
+  set(CUDA_ADDITIONAL_CLEAN_FILES "" CACHE INTERNAL "List of intermediate files that are part of the cuda dependency scanning.")
+endmacro()
diff --git a/share/cmake-3.6/Modules/FindCUDA/make2cmake.cmake b/share/cmake-3.6/Modules/FindCUDA/make2cmake.cmake
new file mode 100644
index 0000000..802f93a
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindCUDA/make2cmake.cmake
@@ -0,0 +1,106 @@
+#  James Bigler, NVIDIA Corp (nvidia.com - jbigler)
+#  Abe Stephens, SCI Institute -- http://www.sci.utah.edu/~abe/FindCuda.html
+#
+#  Copyright (c) 2008 - 2009 NVIDIA Corporation.  All rights reserved.
+#
+#  Copyright (c) 2007-2009
+#  Scientific Computing and Imaging Institute, University of Utah
+#
+#  This code is licensed under the MIT License.  See the FindCUDA.cmake script
+#  for the text of the license.
+
+# The MIT License
+#
+# License for the specific language governing rights and limitations under
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+#
+
+#######################################################################
+# This converts a file written in makefile syntax into one that can be included
+# by CMake.
+
+# Input variables
+#
+# verbose:BOOL=<>          OFF: Be as quiet as possible (default)
+#                          ON : Extra output
+#
+# input_file:FILEPATH=<>   Path to dependecy file in makefile format
+#
+# output_file:FILEPATH=<>  Path to file with dependencies in CMake readable variable
+#
+
+file(READ ${input_file} depend_text)
+
+if (NOT "${depend_text}" STREQUAL "")
+
+  # message("FOUND DEPENDS")
+
+  string(REPLACE "\\ " " " depend_text ${depend_text})
+
+  # This works for the nvcc -M generated dependency files.
+  string(REGEX REPLACE "^.* : " "" depend_text ${depend_text})
+  string(REGEX REPLACE "[ \\\\]*\n" ";" depend_text ${depend_text})
+
+  set(dependency_list "")
+
+  foreach(file ${depend_text})
+
+    string(REGEX REPLACE "^ +" "" file ${file})
+
+    # OK, now if we had a UNC path, nvcc has a tendency to only output the first '/'
+    # instead of '//'.  Here we will test to see if the file exists, if it doesn't then
+    # try to prepend another '/' to the path and test again.  If it still fails remove the
+    # path.
+
+    if(NOT EXISTS "${file}")
+      if (EXISTS "/${file}")
+        set(file "/${file}")
+      else()
+        if(verbose)
+          message(WARNING " Removing non-existent dependency file: ${file}")
+        endif()
+        set(file "")
+      endif()
+    endif()
+
+    # Make sure we check to see if we have a file, before asking if it is not a directory.
+    # if(NOT IS_DIRECTORY "") will return TRUE.
+    if(file AND NOT IS_DIRECTORY "${file}")
+      # If softlinks start to matter, we should change this to REALPATH.  For now we need
+      # to flatten paths, because nvcc can generate stuff like /bin/../include instead of
+      # just /include.
+      get_filename_component(file_absolute "${file}" ABSOLUTE)
+      list(APPEND dependency_list "${file_absolute}")
+    endif()
+
+  endforeach()
+
+else()
+  # message("FOUND NO DEPENDS")
+endif()
+
+# Remove the duplicate entries and sort them.
+list(REMOVE_DUPLICATES dependency_list)
+list(SORT dependency_list)
+
+foreach(file ${dependency_list})
+  set(cuda_nvcc_depend "${cuda_nvcc_depend} \"${file}\"\n")
+endforeach()
+
+file(WRITE ${output_file} "# Generated by: make2cmake.cmake\nSET(CUDA_NVCC_DEPEND\n ${cuda_nvcc_depend})\n\n")
diff --git a/share/cmake-3.2/Modules/FindCUDA/parse_cubin.cmake b/share/cmake-3.6/Modules/FindCUDA/parse_cubin.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCUDA/parse_cubin.cmake
rename to share/cmake-3.6/Modules/FindCUDA/parse_cubin.cmake
diff --git a/share/cmake-3.6/Modules/FindCUDA/run_nvcc.cmake b/share/cmake-3.6/Modules/FindCUDA/run_nvcc.cmake
new file mode 100644
index 0000000..12b83e0
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindCUDA/run_nvcc.cmake
@@ -0,0 +1,291 @@
+#  James Bigler, NVIDIA Corp (nvidia.com - jbigler)
+#
+#  Copyright (c) 2008 - 2009 NVIDIA Corporation.  All rights reserved.
+#
+#  This code is licensed under the MIT License.  See the FindCUDA.cmake script
+#  for the text of the license.
+
+# The MIT License
+#
+# License for the specific language governing rights and limitations under
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+
+
+##########################################################################
+# This file runs the nvcc commands to produce the desired output file along with
+# the dependency file needed by CMake to compute dependencies.  In addition the
+# file checks the output of each command and if the command fails it deletes the
+# output files.
+
+# Input variables
+#
+# verbose:BOOL=<>          OFF: Be as quiet as possible (default)
+#                          ON : Describe each step
+#
+# build_configuration:STRING=<> Typically one of Debug, MinSizeRel, Release, or
+#                               RelWithDebInfo, but it should match one of the
+#                               entries in CUDA_HOST_FLAGS. This is the build
+#                               configuration used when compiling the code.  If
+#                               blank or unspecified Debug is assumed as this is
+#                               what CMake does.
+#
+# generated_file:STRING=<> File to generate.  This argument must be passed in.
+#
+# generated_cubin_file:STRING=<> File to generate.  This argument must be passed
+#                                                   in if build_cubin is true.
+
+if(NOT generated_file)
+  message(FATAL_ERROR "You must specify generated_file on the command line")
+endif()
+
+# Set these up as variables to make reading the generated file easier
+set(CMAKE_COMMAND "@CMAKE_COMMAND@") # path
+set(source_file "@source_file@") # path
+set(NVCC_generated_dependency_file "@NVCC_generated_dependency_file@") # path
+set(cmake_dependency_file "@cmake_dependency_file@") # path
+set(CUDA_make2cmake "@CUDA_make2cmake@") # path
+set(CUDA_parse_cubin "@CUDA_parse_cubin@") # path
+set(build_cubin @build_cubin@) # bool
+set(CUDA_HOST_COMPILER "@CUDA_HOST_COMPILER@") # path
+# We won't actually use these variables for now, but we need to set this, in
+# order to force this file to be run again if it changes.
+set(generated_file_path "@generated_file_path@") # path
+set(generated_file_internal "@generated_file@") # path
+set(generated_cubin_file_internal "@generated_cubin_file@") # path
+
+set(CUDA_NVCC_EXECUTABLE "@CUDA_NVCC_EXECUTABLE@") # path
+set(CUDA_NVCC_FLAGS @CUDA_NVCC_FLAGS@ ;; @CUDA_WRAP_OPTION_NVCC_FLAGS@) # list
+@CUDA_NVCC_FLAGS_CONFIG@
+set(nvcc_flags @nvcc_flags@) # list
+set(CUDA_NVCC_INCLUDE_ARGS "@CUDA_NVCC_INCLUDE_ARGS@") # list (needs to be in quotes to handle spaces properly).
+set(format_flag "@format_flag@") # string
+set(cuda_language_flag @cuda_language_flag@) # list
+
+if(build_cubin AND NOT generated_cubin_file)
+  message(FATAL_ERROR "You must specify generated_cubin_file on the command line")
+endif()
+
+# This is the list of host compilation flags.  It C or CXX should already have
+# been chosen by FindCUDA.cmake.
+@CUDA_HOST_FLAGS@
+
+# Take the compiler flags and package them up to be sent to the compiler via -Xcompiler
+set(nvcc_host_compiler_flags "")
+# If we weren't given a build_configuration, use Debug.
+if(NOT build_configuration)
+  set(build_configuration Debug)
+endif()
+string(TOUPPER "${build_configuration}" build_configuration)
+#message("CUDA_NVCC_HOST_COMPILER_FLAGS = ${CUDA_NVCC_HOST_COMPILER_FLAGS}")
+foreach(flag ${CMAKE_HOST_FLAGS} ${CMAKE_HOST_FLAGS_${build_configuration}})
+  # Extra quotes are added around each flag to help nvcc parse out flags with spaces.
+  set(nvcc_host_compiler_flags "${nvcc_host_compiler_flags},\"${flag}\"")
+endforeach()
+if (nvcc_host_compiler_flags)
+  set(nvcc_host_compiler_flags "-Xcompiler" ${nvcc_host_compiler_flags})
+endif()
+#message("nvcc_host_compiler_flags = \"${nvcc_host_compiler_flags}\"")
+# Add the build specific configuration flags
+list(APPEND CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS_${build_configuration}})
+
+# Any -ccbin existing in CUDA_NVCC_FLAGS gets highest priority
+list( FIND CUDA_NVCC_FLAGS "-ccbin" ccbin_found0 )
+list( FIND CUDA_NVCC_FLAGS "--compiler-bindir" ccbin_found1 )
+if( ccbin_found0 LESS 0 AND ccbin_found1 LESS 0 AND CUDA_HOST_COMPILER )
+  if (CUDA_HOST_COMPILER STREQUAL "$(VCInstallDir)bin" AND DEFINED CCBIN)
+    set(CCBIN -ccbin "${CCBIN}")
+  else()
+    set(CCBIN -ccbin "${CUDA_HOST_COMPILER}")
+  endif()
+endif()
+
+# cuda_execute_process - Executes a command with optional command echo and status message.
+#
+#   status  - Status message to print if verbose is true
+#   command - COMMAND argument from the usual execute_process argument structure
+#   ARGN    - Remaining arguments are the command with arguments
+#
+#   CUDA_result - return value from running the command
+#
+# Make this a macro instead of a function, so that things like RESULT_VARIABLE
+# and other return variables are present after executing the process.
+macro(cuda_execute_process status command)
+  set(_command ${command})
+  if(NOT "x${_command}" STREQUAL "xCOMMAND")
+    message(FATAL_ERROR "Malformed call to cuda_execute_process.  Missing COMMAND as second argument. (command = ${command})")
+  endif()
+  if(verbose)
+    execute_process(COMMAND "${CMAKE_COMMAND}" -E echo -- ${status})
+    # Now we need to build up our command string.  We are accounting for quotes
+    # and spaces, anything else is left up to the user to fix if they want to
+    # copy and paste a runnable command line.
+    set(cuda_execute_process_string)
+    foreach(arg ${ARGN})
+      # If there are quotes, excape them, so they come through.
+      string(REPLACE "\"" "\\\"" arg ${arg})
+      # Args with spaces need quotes around them to get them to be parsed as a single argument.
+      if(arg MATCHES " ")
+        list(APPEND cuda_execute_process_string "\"${arg}\"")
+      else()
+        list(APPEND cuda_execute_process_string ${arg})
+      endif()
+    endforeach()
+    # Echo the command
+    execute_process(COMMAND ${CMAKE_COMMAND} -E echo ${cuda_execute_process_string})
+  endif()
+  # Run the command
+  execute_process(COMMAND ${ARGN} RESULT_VARIABLE CUDA_result )
+endmacro()
+
+# Delete the target file
+cuda_execute_process(
+  "Removing ${generated_file}"
+  COMMAND "${CMAKE_COMMAND}" -E remove "${generated_file}"
+  )
+
+# For CUDA 2.3 and below, -G -M doesn't work, so remove the -G flag
+# for dependency generation and hope for the best.
+set(depends_CUDA_NVCC_FLAGS "${CUDA_NVCC_FLAGS}")
+set(CUDA_VERSION @CUDA_VERSION@)
+if(CUDA_VERSION VERSION_LESS "3.0")
+  cmake_policy(PUSH)
+  # CMake policy 0007 NEW states that empty list elements are not
+  # ignored.  I'm just setting it to avoid the warning that's printed.
+  cmake_policy(SET CMP0007 NEW)
+  # Note that this will remove all occurances of -G.
+  list(REMOVE_ITEM depends_CUDA_NVCC_FLAGS "-G")
+  cmake_policy(POP)
+endif()
+
+# nvcc doesn't define __CUDACC__ for some reason when generating dependency files.  This
+# can cause incorrect dependencies when #including files based on this macro which is
+# defined in the generating passes of nvcc invokation.  We will go ahead and manually
+# define this for now until a future version fixes this bug.
+set(CUDACC_DEFINE -D__CUDACC__)
+
+# Generate the dependency file
+cuda_execute_process(
+  "Generating dependency file: ${NVCC_generated_dependency_file}"
+  COMMAND "${CUDA_NVCC_EXECUTABLE}"
+  -M
+  ${CUDACC_DEFINE}
+  "${source_file}"
+  -o "${NVCC_generated_dependency_file}"
+  ${CCBIN}
+  ${nvcc_flags}
+  ${nvcc_host_compiler_flags}
+  ${depends_CUDA_NVCC_FLAGS}
+  -DNVCC
+  ${CUDA_NVCC_INCLUDE_ARGS}
+  )
+
+if(CUDA_result)
+  message(FATAL_ERROR "Error generating ${generated_file}")
+endif()
+
+# Generate the cmake readable dependency file to a temp file.  Don't put the
+# quotes just around the filenames for the input_file and output_file variables.
+# CMake will pass the quotes through and not be able to find the file.
+cuda_execute_process(
+  "Generating temporary cmake readable file: ${cmake_dependency_file}.tmp"
+  COMMAND "${CMAKE_COMMAND}"
+  -D "input_file:FILEPATH=${NVCC_generated_dependency_file}"
+  -D "output_file:FILEPATH=${cmake_dependency_file}.tmp"
+  -D "verbose=${verbose}"
+  -P "${CUDA_make2cmake}"
+  )
+
+if(CUDA_result)
+  message(FATAL_ERROR "Error generating ${generated_file}")
+endif()
+
+# Copy the file if it is different
+cuda_execute_process(
+  "Copy if different ${cmake_dependency_file}.tmp to ${cmake_dependency_file}"
+  COMMAND "${CMAKE_COMMAND}" -E copy_if_different "${cmake_dependency_file}.tmp" "${cmake_dependency_file}"
+  )
+
+if(CUDA_result)
+  message(FATAL_ERROR "Error generating ${generated_file}")
+endif()
+
+# Delete the temporary file
+cuda_execute_process(
+  "Removing ${cmake_dependency_file}.tmp and ${NVCC_generated_dependency_file}"
+  COMMAND "${CMAKE_COMMAND}" -E remove "${cmake_dependency_file}.tmp" "${NVCC_generated_dependency_file}"
+  )
+
+if(CUDA_result)
+  message(FATAL_ERROR "Error generating ${generated_file}")
+endif()
+
+# Generate the code
+cuda_execute_process(
+  "Generating ${generated_file}"
+  COMMAND "${CUDA_NVCC_EXECUTABLE}"
+  "${source_file}"
+  ${cuda_language_flag}
+  ${format_flag} -o "${generated_file}"
+  ${CCBIN}
+  ${nvcc_flags}
+  ${nvcc_host_compiler_flags}
+  ${CUDA_NVCC_FLAGS}
+  -DNVCC
+  ${CUDA_NVCC_INCLUDE_ARGS}
+  )
+
+if(CUDA_result)
+  # Since nvcc can sometimes leave half done files make sure that we delete the output file.
+  cuda_execute_process(
+    "Removing ${generated_file}"
+    COMMAND "${CMAKE_COMMAND}" -E remove "${generated_file}"
+    )
+  message(FATAL_ERROR "Error generating file ${generated_file}")
+else()
+  if(verbose)
+    message("Generated ${generated_file} successfully.")
+  endif()
+endif()
+
+# Cubin resource report commands.
+if( build_cubin )
+  # Run with -cubin to produce resource usage report.
+  cuda_execute_process(
+    "Generating ${generated_cubin_file}"
+    COMMAND "${CUDA_NVCC_EXECUTABLE}"
+    "${source_file}"
+    ${CUDA_NVCC_FLAGS}
+    ${nvcc_flags}
+    ${CCBIN}
+    ${nvcc_host_compiler_flags}
+    -DNVCC
+    -cubin
+    -o "${generated_cubin_file}"
+    ${CUDA_NVCC_INCLUDE_ARGS}
+    )
+
+  # Execute the parser script.
+  cuda_execute_process(
+    "Executing the parser script"
+    COMMAND  "${CMAKE_COMMAND}"
+    -D "input_file:STRING=${generated_cubin_file}"
+    -P "${CUDA_parse_cubin}"
+    )
+
+endif()
diff --git a/share/cmake-3.2/Modules/FindCURL.cmake b/share/cmake-3.6/Modules/FindCURL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCURL.cmake
rename to share/cmake-3.6/Modules/FindCURL.cmake
diff --git a/share/cmake-3.2/Modules/FindCVS.cmake b/share/cmake-3.6/Modules/FindCVS.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCVS.cmake
rename to share/cmake-3.6/Modules/FindCVS.cmake
diff --git a/share/cmake-3.2/Modules/FindCoin3D.cmake b/share/cmake-3.6/Modules/FindCoin3D.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCoin3D.cmake
rename to share/cmake-3.6/Modules/FindCoin3D.cmake
diff --git a/share/cmake-3.2/Modules/FindCups.cmake b/share/cmake-3.6/Modules/FindCups.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCups.cmake
rename to share/cmake-3.6/Modules/FindCups.cmake
diff --git a/share/cmake-3.2/Modules/FindCurses.cmake b/share/cmake-3.6/Modules/FindCurses.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCurses.cmake
rename to share/cmake-3.6/Modules/FindCurses.cmake
diff --git a/share/cmake-3.2/Modules/FindCxxTest.cmake b/share/cmake-3.6/Modules/FindCxxTest.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCxxTest.cmake
rename to share/cmake-3.6/Modules/FindCxxTest.cmake
diff --git a/share/cmake-3.2/Modules/FindCygwin.cmake b/share/cmake-3.6/Modules/FindCygwin.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindCygwin.cmake
rename to share/cmake-3.6/Modules/FindCygwin.cmake
diff --git a/share/cmake-3.6/Modules/FindDCMTK.cmake b/share/cmake-3.6/Modules/FindDCMTK.cmake
new file mode 100644
index 0000000..63d253d
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindDCMTK.cmake
@@ -0,0 +1,340 @@
+#.rst:
+# FindDCMTK
+# ---------
+#
+# Find DCMTK libraries and applications
+#
+# The module defines the following variables::
+#
+#  DCMTK_INCLUDE_DIRS  - Directories to include to use DCMTK
+#  DCMTK_LIBRARIES     - Files to link against to use DCMTK
+#  DCMTK_FOUND         - If false, don't try to use DCMTK
+#  DCMTK_DIR           - (optional) Source directory for DCMTK
+#
+# Compatibility
+# ^^^^^^^^^^^^^
+#
+# This module is able to find a version of DCMTK that does or does not export
+# a *DCMTKConfig.cmake* file. It applies a two step process:
+#
+# * Step 1:  Attempt to find DCMTK version providing a *DCMTKConfig.cmake* file.
+# * Step 2:  If step 1 failed, rely on *FindDCMTK.cmake* to set `DCMTK_*` variables details below.
+#
+#
+# `Recent DCMTK
+# <http://git.dcmtk.org/web?p=dcmtk.git;a=commit;h=662ae187c493c6b9a73dd5e3875372cebd0c11fe>`_
+# provides a *DCMTKConfig.cmake* :manual:`package configuration file
+# <cmake-packages(7)>`. To exclusively use the package configuration file
+# (recommended when possible), pass the `NO_MODULE` option to
+# :command:`find_package`. For example, `find_package(DCMTK NO_MODULE)`.
+# This requires official DCMTK snapshot *3.6.1_20140617* or newer.
+#
+#
+# Until all clients update to the more recent DCMTK, build systems will need
+# to support different versions of DCMTK.
+#
+# On any given system, the following combinations of DCMTK versions could be
+# considered:
+#
+# +--------+---------------------+-----------------------+-------------------+
+# |        |   SYSTEM DCMTK      |      LOCAL DCMTK      |     Supported ?   |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case A |   NA                |      [ ] DCMTKConfig  |         YES       |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case B |   NA                |      [X] DCMTKConfig  |         YES       |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case C |   [ ] DCMTKConfig   |      NA               |         YES       |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case D |   [X] DCMTKConfig   |      NA               |         YES       |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case E |   [ ] DCMTKConfig   |      [ ] DCMTKConfig  |         YES (*)   |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case F |   [X] DCMTKConfig   |      [ ] DCMTKConfig  |         NO        |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case G |   [ ] DCMTKConfig   |      [X] DCMTKConfig  |         YES       |
+# +--------+---------------------+-----------------------+-------------------+
+# | Case H |   [X] DCMTKConfig   |      [X] DCMTKConfig  |         YES       |
+# +--------+---------------------+-----------------------+-------------------+
+#
+#  (*) See Troubleshooting section.
+#
+# Legend:
+#
+#   NA ...............: Means that no System or Local DCMTK is available
+#
+#   [ ] DCMTKConfig ..: Means that the version of DCMTK does NOT export a DCMTKConfig.cmake file.
+#
+#   [X] DCMTKConfig ..: Means that the version of DCMTK exports a DCMTKConfig.cmake file.
+#
+#
+# Troubleshooting
+# ^^^^^^^^^^^^^^^
+#
+# What to do if my project finds a different version of DCMTK?
+#
+# Remove DCMTK entry from the CMake cache per :command:`find_package`
+# documentation.
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+# Copyright 2009-2010 Mathieu Malaterre <mathieu.malaterre@gmail.com>
+# Copyright 2010 Thomas Sondergaard <ts@medical-insight.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#
+# Written for VXL by Amitha Perera.
+# Upgraded for GDCM by Mathieu Malaterre.
+# Modified for EasyViz by Thomas Sondergaard.
+#
+
+set(_dcmtk_dir_description "The directory of DCMTK build or install tree.")
+
+# Ensure that DCMTK_DIR is set to a reasonable default value
+# so that DCMTK libraries can be found on a standard Unix distribution.
+# It also overwrite the value of DCMTK_DIR after this one has been
+# set by a successful discovery of DCMTK by the unpatched FindDCMTK.cmake module
+# distributed with CMake (as of 0167cea)
+if(NOT DCMTK_DIR OR DCMTK_DIR STREQUAL "/usr/include/dcmtk")
+  set(DCMTK_DIR "/usr" CACHE PATH ${_dcmtk_dir_description} FORCE)
+endif()
+
+set(_SAVED_DCMTK_DIR ${DCMTK_DIR})
+
+#
+# Step1: Attempt to find a version of DCMTK providing a DCMTKConfig.cmake file.
+#
+if(NOT DCMTK_FIND_QUIETLY)
+  message(STATUS "Trying to find DCMTK expecting DCMTKConfig.cmake")
+endif()
+find_package(DCMTK QUIET NO_MODULE)
+if(DCMTK_FOUND
+    AND NOT "x" STREQUAL "x${DCMTK_LIBRARIES}"
+    AND NOT "x" STREQUAL "x${DCMTK_INCLUDE_DIRS}")
+
+  if(NOT DCMTK_FIND_QUIETLY)
+    message(STATUS "Trying to find DCMTK expecting DCMTKConfig.cmake - ok")
+  endif()
+  return()
+else()
+  if(NOT DCMTK_FIND_QUIETLY)
+    message(STATUS "Trying to find DCMTK expecting DCMTKConfig.cmake - failed")
+  endif()
+endif()
+
+if(NOT DCMTK_FIND_QUIETLY)
+  message(STATUS "Trying to find DCMTK relying on FindDCMTK.cmake")
+endif()
+
+# Restore the value reset by the previous call to 'find_package(DCMTK QUIET NO_MODULE)'
+set(DCMTK_DIR ${_SAVED_DCMTK_DIR} CACHE PATH ${_dcmtk_dir_description} FORCE)
+
+
+#
+# Step2: Attempt to find a version of DCMTK that does NOT provide a DCMTKConfig.cmake file.
+#
+
+# prefer DCMTK_DIR over default system paths like /usr/lib
+if(DCMTK_DIR)
+  set(CMAKE_PREFIX_PATH ${DCMTK_DIR}/lib ${CMAKE_PREFIX_PATH}) # this is given to FIND_LIBRARY or FIND_PATH
+endif()
+
+# Find all libraries, store debug and release separately
+foreach(lib
+    dcmpstat
+    dcmsr
+    dcmsign
+    dcmtls
+    dcmqrdb
+    dcmnet
+    dcmjpeg
+    dcmimage
+    dcmimgle
+    dcmdata
+    oflog
+    ofstd
+    ijg12
+    ijg16
+    ijg8
+    )
+
+  # Find Release libraries
+  find_library(DCMTK_${lib}_LIBRARY_RELEASE
+    ${lib}
+    PATHS
+    ${DCMTK_DIR}/${lib}/libsrc
+    ${DCMTK_DIR}/${lib}/libsrc/Release
+    ${DCMTK_DIR}/${lib}/Release
+    ${DCMTK_DIR}/lib
+    ${DCMTK_DIR}/lib/Release
+    ${DCMTK_DIR}/dcmjpeg/lib${lib}/Release
+    NO_DEFAULT_PATH
+    )
+
+  # Find Debug libraries
+  find_library(DCMTK_${lib}_LIBRARY_DEBUG
+    ${lib}${DCMTK_CMAKE_DEBUG_POSTFIX}
+    PATHS
+    ${DCMTK_DIR}/${lib}/libsrc
+    ${DCMTK_DIR}/${lib}/libsrc/Debug
+    ${DCMTK_DIR}/${lib}/Debug
+    ${DCMTK_DIR}/lib
+    ${DCMTK_DIR}/lib/Debug
+    ${DCMTK_DIR}/dcmjpeg/lib${lib}/Debug
+    NO_DEFAULT_PATH
+    )
+
+  mark_as_advanced(DCMTK_${lib}_LIBRARY_RELEASE)
+  mark_as_advanced(DCMTK_${lib}_LIBRARY_DEBUG)
+
+  # Add libraries to variable according to build type
+  if(DCMTK_${lib}_LIBRARY_RELEASE)
+    list(APPEND DCMTK_LIBRARIES optimized ${DCMTK_${lib}_LIBRARY_RELEASE})
+  endif()
+
+  if(DCMTK_${lib}_LIBRARY_DEBUG)
+    list(APPEND DCMTK_LIBRARIES debug ${DCMTK_${lib}_LIBRARY_DEBUG})
+  endif()
+
+endforeach()
+
+set(CMAKE_THREAD_LIBS_INIT)
+if(DCMTK_oflog_LIBRARY_RELEASE OR DCMTK_oflog_LIBRARY_DEBUG)
+  # Hack - Not having a DCMTKConfig.cmake file to read the settings from, we will attempt to
+  # find the library in all cases.
+  # Ideally, pthread library should be discovered only if DCMTK_WITH_THREADS is enabled.
+  set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
+  find_package(Threads)
+endif()
+
+if(CMAKE_THREAD_LIBS_INIT)
+  list(APPEND DCMTK_LIBRARIES ${CMAKE_THREAD_LIBS_INIT})
+endif()
+
+#
+# SPECIFIC CASE FOR DCMTK BUILD DIR as DCMTK_DIR
+# (as opposed to a DCMTK install dir)
+# Have to find the source directory.
+if(EXISTS ${DCMTK_DIR}/CMakeCache.txt)
+          load_cache(${DCMTK_DIR} READ_WITH_PREFIX "EXT"
+          DCMTK_SOURCE_DIR)
+  if(NOT EXISTS ${EXTDCMTK_SOURCE_DIR})
+    message(FATAL_ERROR
+      "DCMTK build directory references
+nonexistant DCMTK source directory ${EXTDCMTK_SOURCE_DIR}")
+  endif()
+endif()
+
+set(DCMTK_config_TEST_HEADER osconfig.h)
+set(DCMTK_dcmdata_TEST_HEADER dctypes.h)
+set(DCMTK_dcmimage_TEST_HEADER dicoimg.h)
+set(DCMTK_dcmimgle_TEST_HEADER dcmimage.h)
+set(DCMTK_dcmjpeg_TEST_HEADER djdecode.h)
+set(DCMTK_dcmnet_TEST_HEADER assoc.h)
+set(DCMTK_dcmpstat_TEST_HEADER dcmpstat.h)
+set(DCMTK_dcmqrdb_TEST_HEADER dcmqrdba.h)
+set(DCMTK_dcmsign_TEST_HEADER sicert.h)
+set(DCMTK_dcmsr_TEST_HEADER dsrtree.h)
+set(DCMTK_dcmtls_TEST_HEADER tlslayer.h)
+set(DCMTK_ofstd_TEST_HEADER ofstdinc.h)
+set(DCMTK_oflog_TEST_HEADER oflog.h)
+set(DCMTK_dcmjpls_TEST_HEADER djlsutil.h)
+
+set(DCMTK_INCLUDE_DIR_NAMES)
+
+foreach(dir
+    config
+    dcmdata
+    dcmimage
+    dcmimgle
+    dcmjpeg
+    dcmjpls
+    dcmnet
+    dcmpstat
+    dcmqrdb
+    dcmsign
+    dcmsr
+    dcmtls
+    ofstd
+    oflog)
+  if(EXTDCMTK_SOURCE_DIR)
+    set(SOURCE_DIR_PATH
+      ${EXTDCMTK_SOURCE_DIR}/${dir}/include/dcmtk/${dir})
+  endif()
+  find_path(DCMTK_${dir}_INCLUDE_DIR
+    ${DCMTK_${dir}_TEST_HEADER}
+    PATHS
+    ${DCMTK_DIR}/${dir}/include
+    ${DCMTK_DIR}/${dir}
+    ${DCMTK_DIR}/include/dcmtk/${dir}
+    ${DCMTK_DIR}/${dir}/include/dcmtk/${dir}
+    ${DCMTK_DIR}/include/${dir}
+    ${SOURCE_DIR_PATH}
+    )
+  mark_as_advanced(DCMTK_${dir}_INCLUDE_DIR)
+  list(APPEND DCMTK_INCLUDE_DIR_NAMES DCMTK_${dir}_INCLUDE_DIR)
+
+  if(DCMTK_${dir}_INCLUDE_DIR)
+    # add the 'include' path so eg
+    #include "dcmtk/dcmimgle/dcmimage.h"
+    # works
+    get_filename_component(_include ${DCMTK_${dir}_INCLUDE_DIR} PATH)
+    get_filename_component(_include ${_include} PATH)
+    list(APPEND
+      DCMTK_INCLUDE_DIRS
+      ${DCMTK_${dir}_INCLUDE_DIR}
+      ${_include})
+  endif()
+endforeach()
+
+list(APPEND DCMTK_INCLUDE_DIRS ${DCMTK_DIR}/include)
+
+if(WIN32)
+  list(APPEND DCMTK_LIBRARIES netapi32 wsock32)
+endif()
+
+if(DCMTK_ofstd_INCLUDE_DIR)
+  get_filename_component(DCMTK_dcmtk_INCLUDE_DIR
+    ${DCMTK_ofstd_INCLUDE_DIR}
+    PATH
+    CACHE)
+  list(APPEND DCMTK_INCLUDE_DIRS ${DCMTK_dcmtk_INCLUDE_DIR})
+  mark_as_advanced(DCMTK_dcmtk_INCLUDE_DIR)
+endif()
+
+# Compatibility: This variable is deprecated
+set(DCMTK_INCLUDE_DIR ${DCMTK_INCLUDE_DIRS})
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(DCMTK
+  REQUIRED_VARS ${DCMTK_INCLUDE_DIR_NAMES} DCMTK_LIBRARIES
+  FAIL_MESSAGE "Please set DCMTK_DIR and re-run configure")
+
+# Workaround bug in packaging of DCMTK 3.6.0 on Debian.
+# See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637687
+if(DCMTK_FOUND AND UNIX AND NOT APPLE)
+  include(CheckCXXSourceCompiles)
+  set(CMAKE_REQUIRED_FLAGS )
+  set(CMAKE_REQUIRED_DEFINITIONS )
+  set(CMAKE_REQUIRED_INCLUDES ${DCMTK_INCLUDE_DIRS})
+  set(CMAKE_REQUIRED_LIBRARIES ${DCMTK_LIBRARIES})
+  set(CMAKE_REQUIRED_QUIET ${DCMTK_FIND_QUIETLY})
+  check_cxx_source_compiles("#include <dcmtk/config/osconfig.h>\n#include <dcmtk/ofstd/ofstream.h>\nint main(int,char*[]){return 0;}"
+    DCMTK_HAVE_CONFIG_H_OPTIONAL
+    )
+  if(NOT DCMTK_HAVE_CONFIG_H_OPTIONAL)
+    set(DCMTK_DEFINITIONS "HAVE_CONFIG_H")
+  endif()
+endif()
+
+if(NOT DCMTK_FIND_QUIETLY)
+  message(STATUS "Trying to find DCMTK relying on FindDCMTK.cmake - ok")
+endif()
diff --git a/share/cmake-3.2/Modules/FindDart.cmake b/share/cmake-3.6/Modules/FindDart.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindDart.cmake
rename to share/cmake-3.6/Modules/FindDart.cmake
diff --git a/share/cmake-3.2/Modules/FindDevIL.cmake b/share/cmake-3.6/Modules/FindDevIL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindDevIL.cmake
rename to share/cmake-3.6/Modules/FindDevIL.cmake
diff --git a/share/cmake-3.2/Modules/FindDoxygen.cmake b/share/cmake-3.6/Modules/FindDoxygen.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindDoxygen.cmake
rename to share/cmake-3.6/Modules/FindDoxygen.cmake
diff --git a/share/cmake-3.2/Modules/FindEXPAT.cmake b/share/cmake-3.6/Modules/FindEXPAT.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindEXPAT.cmake
rename to share/cmake-3.6/Modules/FindEXPAT.cmake
diff --git a/share/cmake-3.6/Modules/FindFLEX.cmake b/share/cmake-3.6/Modules/FindFLEX.cmake
new file mode 100644
index 0000000..b50c74a
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindFLEX.cmake
@@ -0,0 +1,233 @@
+#.rst:
+# FindFLEX
+# --------
+#
+# Find flex executable and provides a macro to generate custom build rules
+#
+#
+#
+# The module defines the following variables:
+#
+# ::
+#
+#   FLEX_FOUND - true is flex executable is found
+#   FLEX_EXECUTABLE - the path to the flex executable
+#   FLEX_VERSION - the version of flex
+#   FLEX_LIBRARIES - The flex libraries
+#   FLEX_INCLUDE_DIRS - The path to the flex headers
+#
+#
+#
+# The minimum required version of flex can be specified using the
+# standard syntax, e.g.  find_package(FLEX 2.5.13)
+#
+#
+#
+# If flex is found on the system, the module provides the macro:
+#
+# ::
+#
+#   FLEX_TARGET(Name FlexInput FlexOutput
+#               [COMPILE_FLAGS <string>]
+#               [DEFINES_FILE <string>]
+#               )
+#
+# which creates a custom command to generate the <FlexOutput> file from
+# the <FlexInput> file.  If COMPILE_FLAGS option is specified, the next
+# parameter is added to the flex command line. If flex is configured to
+# output a header file, the DEFINES_FILE option may be used to specify its
+# name. Name is an alias used to get details of this custom command.
+# Indeed the macro defines the following variables:
+#
+# ::
+#
+#   FLEX_${Name}_DEFINED - true is the macro ran successfully
+#   FLEX_${Name}_OUTPUTS - the source file generated by the custom rule, an
+#   alias for FlexOutput
+#   FLEX_${Name}_INPUT - the flex source file, an alias for ${FlexInput}
+#   FLEX_${Name}_OUTPUT_HEADER - the header flex output, if any.
+#
+#
+#
+# Flex scanners oftenly use tokens defined by Bison: the code generated
+# by Flex depends of the header generated by Bison.  This module also
+# defines a macro:
+#
+# ::
+#
+#   ADD_FLEX_BISON_DEPENDENCY(FlexTarget BisonTarget)
+#
+# which adds the required dependency between a scanner and a parser
+# where <FlexTarget> and <BisonTarget> are the first parameters of
+# respectively FLEX_TARGET and BISON_TARGET macros.
+#
+# ::
+#
+#   ====================================================================
+#   Example:
+#
+#
+#
+# ::
+#
+#    find_package(BISON)
+#    find_package(FLEX)
+#
+#
+#
+# ::
+#
+#    BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp)
+#    FLEX_TARGET(MyScanner lexer.l  ${CMAKE_CURRENT_BINARY_DIR}/lexer.cpp)
+#    ADD_FLEX_BISON_DEPENDENCY(MyScanner MyParser)
+#
+#
+#
+# ::
+#
+#    include_directories(${CMAKE_CURRENT_BINARY_DIR})
+#    add_executable(Foo
+#       Foo.cc
+#       ${BISON_MyParser_OUTPUTS}
+#       ${FLEX_MyScanner_OUTPUTS}
+#    )
+#   ====================================================================
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+# Copyright 2006 Tristan Carel
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_program(FLEX_EXECUTABLE NAMES flex win_flex DOC "path to the flex executable")
+mark_as_advanced(FLEX_EXECUTABLE)
+
+find_library(FL_LIBRARY NAMES fl
+  DOC "Path to the fl library")
+
+find_path(FLEX_INCLUDE_DIR FlexLexer.h
+  DOC "Path to the flex headers")
+
+mark_as_advanced(FL_LIBRARY FLEX_INCLUDE_DIR)
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
+
+set(FLEX_INCLUDE_DIRS ${FLEX_INCLUDE_DIR})
+set(FLEX_LIBRARIES ${FL_LIBRARY})
+
+if(FLEX_EXECUTABLE)
+
+  execute_process(COMMAND ${FLEX_EXECUTABLE} --version
+    OUTPUT_VARIABLE FLEX_version_output
+    ERROR_VARIABLE FLEX_version_error
+    RESULT_VARIABLE FLEX_version_result
+    OUTPUT_STRIP_TRAILING_WHITESPACE)
+  if(NOT ${FLEX_version_result} EQUAL 0)
+    if(FLEX_FIND_REQUIRED)
+      message(SEND_ERROR "Command \"${FLEX_EXECUTABLE} --version\" failed with output:\n${FLEX_version_output}\n${FLEX_version_error}")
+    else()
+      message("Command \"${FLEX_EXECUTABLE} --version\" failed with output:\n${FLEX_version_output}\n${FLEX_version_error}\nFLEX_VERSION will not be available")
+    endif()
+  else()
+    # older versions of flex printed "/full/path/to/executable version X.Y"
+    # newer versions use "basename(executable) X.Y"
+    get_filename_component(FLEX_EXE_NAME_WE "${FLEX_EXECUTABLE}" NAME_WE)
+    get_filename_component(FLEX_EXE_EXT "${FLEX_EXECUTABLE}" EXT)
+    string(REGEX REPLACE "^.*${FLEX_EXE_NAME_WE}(${FLEX_EXE_EXT})?\"? (version )?([0-9]+[^ ]*)( .*)?$" "\\3"
+      FLEX_VERSION "${FLEX_version_output}")
+    unset(FLEX_EXE_EXT)
+    unset(FLEX_EXE_NAME_WE)
+  endif()
+
+  #============================================================
+  # FLEX_TARGET (public macro)
+  #============================================================
+  #
+  macro(FLEX_TARGET Name Input Output)
+    set(FLEX_TARGET_outputs "${Output}")
+    set(FLEX_EXECUTABLE_opts "")
+
+    set(FLEX_TARGET_PARAM_OPTIONS)
+    set(FLEX_TARGET_PARAM_ONE_VALUE_KEYWORDS
+      COMPILE_FLAGS
+      DEFINES_FILE
+      )
+    set(FLEX_TARGET_PARAM_MULTI_VALUE_KEYWORDS)
+
+    cmake_parse_arguments(
+      FLEX_TARGET_ARG
+      "${FLEX_TARGET_PARAM_OPTIONS}"
+      "${FLEX_TARGET_PARAM_ONE_VALUE_KEYWORDS}"
+      "${FLEX_TARGET_MULTI_VALUE_KEYWORDS}"
+      ${ARGN}
+      )
+
+    set(FLEX_TARGET_usage "FLEX_TARGET(<Name> <Input> <Output> [COMPILE_FLAGS <string>] [DEFINES_FILE <string>]")
+
+    if(NOT "${FLEX_TARGET_ARG_UNPARSED_ARGUMENTS}" STREQUAL "")
+      message(SEND_ERROR ${FLEX_TARGET_usage})
+    else()
+      if(NOT "${FLEX_TARGET_ARG_COMPILE_FLAGS}" STREQUAL "")
+        set(FLEX_EXECUTABLE_opts "${FLEX_TARGET_ARG_COMPILE_FLAGS}")
+        separate_arguments(FLEX_EXECUTABLE_opts)
+      endif()
+      if(NOT "${FLEX_TARGET_ARG_DEFINES_FILE}" STREQUAL "")
+        list(APPEND FLEX_TARGET_outputs "${FLEX_TARGET_ARG_DEFINES_FILE}")
+        list(APPEND FLEX_EXECUTABLE_opts --header-file=${FLEX_TARGET_ARG_DEFINES_FILE})
+      endif()
+
+      add_custom_command(OUTPUT ${FLEX_TARGET_outputs}
+        COMMAND ${FLEX_EXECUTABLE} ${FLEX_EXECUTABLE_opts} -o${Output} ${Input}
+        VERBATIM
+        DEPENDS ${Input}
+        COMMENT "[FLEX][${Name}] Building scanner with flex ${FLEX_VERSION}"
+        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
+
+      set(FLEX_${Name}_DEFINED TRUE)
+      set(FLEX_${Name}_OUTPUTS ${Output})
+      set(FLEX_${Name}_INPUT ${Input})
+      set(FLEX_${Name}_COMPILE_FLAGS ${FLEX_EXECUTABLE_opts})
+      if("${FLEX_TARGET_ARG_DEFINES_FILE}" STREQUAL "")
+        set(FLEX_${Name}_OUTPUT_HEADER "")
+      else()
+        set(FLEX_${Name}_OUTPUT_HEADER ${FLEX_TARGET_ARG_DEFINES_FILE})
+      endif()
+    endif()
+  endmacro()
+  #============================================================
+
+
+  #============================================================
+  # ADD_FLEX_BISON_DEPENDENCY (public macro)
+  #============================================================
+  #
+  macro(ADD_FLEX_BISON_DEPENDENCY FlexTarget BisonTarget)
+
+    if(NOT FLEX_${FlexTarget}_OUTPUTS)
+      message(SEND_ERROR "Flex target `${FlexTarget}' does not exist.")
+    endif()
+
+    if(NOT BISON_${BisonTarget}_OUTPUT_HEADER)
+      message(SEND_ERROR "Bison target `${BisonTarget}' does not exist.")
+    endif()
+
+    set_source_files_properties(${FLEX_${FlexTarget}_OUTPUTS}
+      PROPERTIES OBJECT_DEPENDS ${BISON_${BisonTarget}_OUTPUT_HEADER})
+  endmacro()
+  #============================================================
+
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(FLEX REQUIRED_VARS FLEX_EXECUTABLE
+                                       VERSION_VAR FLEX_VERSION)
+
+# FindFLEX.cmake ends here
diff --git a/share/cmake-3.6/Modules/FindFLTK.cmake b/share/cmake-3.6/Modules/FindFLTK.cmake
new file mode 100644
index 0000000..ad0bf98
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindFLTK.cmake
@@ -0,0 +1,319 @@
+#.rst:
+# FindFLTK
+# --------
+#
+# Find the native FLTK includes and library
+#
+#
+#
+# By default FindFLTK.cmake will search for all of the FLTK components
+# and add them to the FLTK_LIBRARIES variable.
+#
+# ::
+#
+#    You can limit the components which get placed in FLTK_LIBRARIES by
+#    defining one or more of the following three options:
+#
+#
+#
+# ::
+#
+#      FLTK_SKIP_OPENGL, set to true to disable searching for opengl and
+#                        the FLTK GL library
+#      FLTK_SKIP_FORMS, set to true to disable searching for fltk_forms
+#      FLTK_SKIP_IMAGES, set to true to disable searching for fltk_images
+#
+#
+#
+# ::
+#
+#      FLTK_SKIP_FLUID, set to true if the fluid binary need not be present
+#                       at build time
+#
+#
+#
+# The following variables will be defined:
+#
+# ::
+#
+#      FLTK_FOUND, True if all components not skipped were found
+#      FLTK_INCLUDE_DIR, where to find include files
+#      FLTK_LIBRARIES, list of fltk libraries you should link against
+#      FLTK_FLUID_EXECUTABLE, where to find the Fluid tool
+#      FLTK_WRAP_UI, This enables the FLTK_WRAP_UI command
+#
+#
+#
+# The following cache variables are assigned but should not be used.
+# See the FLTK_LIBRARIES variable instead.
+#
+# ::
+#
+#      FLTK_BASE_LIBRARY   = the full path to fltk.lib
+#      FLTK_GL_LIBRARY     = the full path to fltk_gl.lib
+#      FLTK_FORMS_LIBRARY  = the full path to fltk_forms.lib
+#      FLTK_IMAGES_LIBRARY = the full path to fltk_images.lib
+
+#=============================================================================
+# Copyright 2001-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(NOT FLTK_SKIP_OPENGL)
+  find_package(OpenGL)
+endif()
+
+#  Platform dependent libraries required by FLTK
+if(WIN32)
+  if(NOT CYGWIN)
+    if(BORLAND)
+      set( FLTK_PLATFORM_DEPENDENT_LIBS import32 )
+    else()
+      set( FLTK_PLATFORM_DEPENDENT_LIBS wsock32 comctl32 )
+    endif()
+  endif()
+endif()
+
+if(UNIX)
+  include(${CMAKE_CURRENT_LIST_DIR}/FindX11.cmake)
+  find_library(FLTK_MATH_LIBRARY m)
+  set( FLTK_PLATFORM_DEPENDENT_LIBS ${X11_LIBRARIES} ${FLTK_MATH_LIBRARY})
+endif()
+
+if(APPLE)
+  set( FLTK_PLATFORM_DEPENDENT_LIBS  "-framework Carbon -framework Cocoa -framework ApplicationServices -lz")
+endif()
+
+# If FLTK_INCLUDE_DIR is already defined we assigne its value to FLTK_DIR
+if(FLTK_INCLUDE_DIR)
+  set(FLTK_DIR ${FLTK_INCLUDE_DIR})
+endif()
+
+
+# If FLTK has been built using CMake we try to find everything directly
+set(FLTK_DIR_STRING "directory containing FLTKConfig.cmake.  This is either the root of the build tree, or PREFIX/lib/fltk for an installation.")
+
+# Search only if the location is not already known.
+if(NOT FLTK_DIR)
+  # Get the system search path as a list.
+  file(TO_CMAKE_PATH "$ENV{PATH}" FLTK_DIR_SEARCH2)
+
+  # Construct a set of paths relative to the system search path.
+  set(FLTK_DIR_SEARCH "")
+  foreach(dir ${FLTK_DIR_SEARCH2})
+    set(FLTK_DIR_SEARCH ${FLTK_DIR_SEARCH} "${dir}/../lib/fltk")
+  endforeach()
+  string(REPLACE "//" "/" FLTK_DIR_SEARCH "${FLTK_DIR_SEARCH}")
+
+  #
+  # Look for an installation or build tree.
+  #
+  find_path(FLTK_DIR FLTKConfig.cmake
+    # Look for an environment variable FLTK_DIR.
+    HINTS
+      ENV FLTK_DIR
+
+    # Look in places relative to the system executable search path.
+    ${FLTK_DIR_SEARCH}
+
+    PATHS
+    # Look in standard UNIX install locations.
+    /usr/local/lib/fltk
+    /usr/lib/fltk
+    /usr/local/fltk
+    /usr/X11R6/include
+
+    # Help the user find it if we cannot.
+    DOC "The ${FLTK_DIR_STRING}"
+    )
+endif()
+
+  # Check if FLTK was built using CMake
+  if(EXISTS ${FLTK_DIR}/FLTKConfig.cmake)
+    set(FLTK_BUILT_WITH_CMAKE 1)
+  endif()
+
+  if(FLTK_BUILT_WITH_CMAKE)
+    set(FLTK_FOUND 1)
+    include(${FLTK_DIR}/FLTKConfig.cmake)
+
+    # Fluid
+    if(FLUID_COMMAND)
+      set(FLTK_FLUID_EXECUTABLE ${FLUID_COMMAND} CACHE FILEPATH "Fluid executable")
+    else()
+      find_program(FLTK_FLUID_EXECUTABLE fluid PATHS
+        ${FLTK_EXECUTABLE_DIRS}
+        ${FLTK_EXECUTABLE_DIRS}/RelWithDebInfo
+        ${FLTK_EXECUTABLE_DIRS}/Debug
+        ${FLTK_EXECUTABLE_DIRS}/Release
+        NO_SYSTEM_PATH)
+    endif()
+    # mark_as_advanced(FLTK_FLUID_EXECUTABLE)
+
+    set(FLTK_INCLUDE_DIR ${FLTK_DIR})
+    link_directories(${FLTK_LIBRARY_DIRS})
+
+    set(FLTK_BASE_LIBRARY fltk)
+    set(FLTK_GL_LIBRARY fltk_gl)
+    set(FLTK_FORMS_LIBRARY fltk_forms)
+    set(FLTK_IMAGES_LIBRARY fltk_images)
+
+    # Add the extra libraries
+    load_cache(${FLTK_DIR}
+      READ_WITH_PREFIX
+      FL FLTK_USE_SYSTEM_JPEG
+      FL FLTK_USE_SYSTEM_PNG
+      FL FLTK_USE_SYSTEM_ZLIB
+      )
+
+    set(FLTK_IMAGES_LIBS "")
+    if(FLFLTK_USE_SYSTEM_JPEG)
+      set(FLTK_IMAGES_LIBS ${FLTK_IMAGES_LIBS} fltk_jpeg)
+    endif()
+    if(FLFLTK_USE_SYSTEM_PNG)
+      set(FLTK_IMAGES_LIBS ${FLTK_IMAGES_LIBS} fltk_png)
+    endif()
+    if(FLFLTK_USE_SYSTEM_ZLIB)
+      set(FLTK_IMAGES_LIBS ${FLTK_IMAGES_LIBS} fltk_zlib)
+    endif()
+    set(FLTK_IMAGES_LIBS "${FLTK_IMAGES_LIBS}" CACHE INTERNAL
+      "Extra libraries for fltk_images library.")
+
+  else()
+
+    # if FLTK was not built using CMake
+    # Find fluid executable.
+    find_program(FLTK_FLUID_EXECUTABLE fluid ${FLTK_INCLUDE_DIR}/fluid)
+
+    # Use location of fluid to help find everything else.
+    set(FLTK_INCLUDE_SEARCH_PATH "")
+    set(FLTK_LIBRARY_SEARCH_PATH "")
+    if(FLTK_FLUID_EXECUTABLE)
+      get_filename_component(FLTK_BIN_DIR "${FLTK_FLUID_EXECUTABLE}" PATH)
+      set(FLTK_INCLUDE_SEARCH_PATH ${FLTK_INCLUDE_SEARCH_PATH}
+        ${FLTK_BIN_DIR}/../include ${FLTK_BIN_DIR}/..)
+      set(FLTK_LIBRARY_SEARCH_PATH ${FLTK_LIBRARY_SEARCH_PATH}
+        ${FLTK_BIN_DIR}/../lib)
+      set(FLTK_WRAP_UI 1)
+    endif()
+
+    #
+    # Try to find FLTK include dir using fltk-config
+    #
+    if(UNIX)
+      # Use fltk-config to generate a list of possible include directories
+      find_program(FLTK_CONFIG_SCRIPT fltk-config PATHS ${FLTK_BIN_DIR})
+      if(FLTK_CONFIG_SCRIPT)
+        if(NOT FLTK_INCLUDE_DIR)
+          exec_program(${FLTK_CONFIG_SCRIPT} ARGS --cxxflags OUTPUT_VARIABLE FLTK_CXXFLAGS)
+          if(FLTK_CXXFLAGS)
+            string(REGEX MATCHALL "-I[^ ]*" _fltk_temp_dirs ${FLTK_CXXFLAGS})
+            string(REPLACE "-I" "" _fltk_temp_dirs "${_fltk_temp_dirs}")
+            foreach(_dir ${_fltk_temp_dirs})
+              string(STRIP ${_dir} _output)
+              list(APPEND _FLTK_POSSIBLE_INCLUDE_DIRS ${_output})
+            endforeach()
+          endif()
+        endif()
+      endif()
+    endif()
+
+    set(FLTK_INCLUDE_SEARCH_PATH ${FLTK_INCLUDE_SEARCH_PATH}
+      /usr/local/fltk
+      /usr/X11R6/include
+      ${_FLTK_POSSIBLE_INCLUDE_DIRS}
+      )
+
+    find_path(FLTK_INCLUDE_DIR
+        NAMES FL/Fl.h FL/Fl.H    # fltk 1.1.9 has Fl.H (#8376)
+        PATHS ${FLTK_INCLUDE_SEARCH_PATH})
+
+    #
+    # Try to find FLTK library
+    if(UNIX)
+      if(FLTK_CONFIG_SCRIPT)
+        exec_program(${FLTK_CONFIG_SCRIPT} ARGS --libs OUTPUT_VARIABLE _FLTK_POSSIBLE_LIBS)
+        if(_FLTK_POSSIBLE_LIBS)
+          get_filename_component(_FLTK_POSSIBLE_LIBRARY_DIR ${_FLTK_POSSIBLE_LIBS} PATH)
+        endif()
+      endif()
+    endif()
+
+    set(FLTK_LIBRARY_SEARCH_PATH ${FLTK_LIBRARY_SEARCH_PATH}
+      /usr/local/fltk/lib
+      /usr/X11R6/lib
+      ${FLTK_INCLUDE_DIR}/lib
+      ${_FLTK_POSSIBLE_LIBRARY_DIR}
+      )
+
+    find_library(FLTK_BASE_LIBRARY NAMES fltk fltkd
+      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
+    find_library(FLTK_GL_LIBRARY NAMES fltkgl fltkgld fltk_gl
+      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
+    find_library(FLTK_FORMS_LIBRARY NAMES fltkforms fltkformsd fltk_forms
+      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
+    find_library(FLTK_IMAGES_LIBRARY NAMES fltkimages fltkimagesd fltk_images
+      PATHS ${FLTK_LIBRARY_SEARCH_PATH})
+
+    # Find the extra libraries needed for the fltk_images library.
+    if(UNIX)
+      if(FLTK_CONFIG_SCRIPT)
+        exec_program(${FLTK_CONFIG_SCRIPT} ARGS --use-images --ldflags
+          OUTPUT_VARIABLE FLTK_IMAGES_LDFLAGS)
+        set(FLTK_LIBS_EXTRACT_REGEX ".*-lfltk_images (.*) -lfltk.*")
+        if("${FLTK_IMAGES_LDFLAGS}" MATCHES "${FLTK_LIBS_EXTRACT_REGEX}")
+          string(REGEX REPLACE " +" ";" FLTK_IMAGES_LIBS "${CMAKE_MATCH_1}")
+          # The EXEC_PROGRAM will not be inherited into subdirectories from
+          # the file that originally included this module.  Save the answer.
+          set(FLTK_IMAGES_LIBS "${FLTK_IMAGES_LIBS}" CACHE INTERNAL
+            "Extra libraries for fltk_images library.")
+        endif()
+      endif()
+    endif()
+
+  endif()
+
+  # Append all of the required libraries together (by default, everything)
+  set(FLTK_LIBRARIES)
+  if(NOT FLTK_SKIP_IMAGES)
+    list(APPEND FLTK_LIBRARIES ${FLTK_IMAGES_LIBRARY})
+  endif()
+  if(NOT FLTK_SKIP_FORMS)
+    list(APPEND FLTK_LIBRARIES ${FLTK_FORMS_LIBRARY})
+  endif()
+  if(NOT FLTK_SKIP_OPENGL)
+    list(APPEND FLTK_LIBRARIES ${FLTK_GL_LIBRARY} ${OPENGL_gl_LIBRARY})
+    list(APPEND FLTK_INCLUDE_DIR ${OPENGL_INCLUDE_DIR})
+    list(REMOVE_DUPLICATES FLTK_INCLUDE_DIR)
+  endif()
+  list(APPEND FLTK_LIBRARIES ${FLTK_BASE_LIBRARY})
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+if(FLTK_SKIP_FLUID)
+  FIND_PACKAGE_HANDLE_STANDARD_ARGS(FLTK DEFAULT_MSG FLTK_LIBRARIES FLTK_INCLUDE_DIR)
+else()
+  FIND_PACKAGE_HANDLE_STANDARD_ARGS(FLTK DEFAULT_MSG FLTK_LIBRARIES FLTK_INCLUDE_DIR FLTK_FLUID_EXECUTABLE)
+endif()
+
+if(FLTK_FOUND)
+  if(APPLE)
+    set(FLTK_LIBRARIES ${FLTK_PLATFORM_DEPENDENT_LIBS} ${FLTK_LIBRARIES})
+  else()
+    set(FLTK_LIBRARIES ${FLTK_LIBRARIES} ${FLTK_PLATFORM_DEPENDENT_LIBS})
+  endif()
+
+  # The following deprecated settings are for compatibility with CMake 1.4
+  set (HAS_FLTK ${FLTK_FOUND})
+  set (FLTK_INCLUDE_PATH ${FLTK_INCLUDE_DIR})
+  set (FLTK_FLUID_EXE ${FLTK_FLUID_EXECUTABLE})
+  set (FLTK_LIBRARY ${FLTK_LIBRARIES})
+endif()
+
diff --git a/share/cmake-3.6/Modules/FindFLTK2.cmake b/share/cmake-3.6/Modules/FindFLTK2.cmake
new file mode 100644
index 0000000..154729f
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindFLTK2.cmake
@@ -0,0 +1,264 @@
+#.rst:
+# FindFLTK2
+# ---------
+#
+# Find the native FLTK2 includes and library
+#
+# The following settings are defined
+#
+# ::
+#
+#   FLTK2_FLUID_EXECUTABLE, where to find the Fluid tool
+#   FLTK2_WRAP_UI, This enables the FLTK2_WRAP_UI command
+#   FLTK2_INCLUDE_DIR, where to find include files
+#   FLTK2_LIBRARIES, list of fltk2 libraries
+#   FLTK2_FOUND, Don't use FLTK2 if false.
+#
+# The following settings should not be used in general.
+#
+# ::
+#
+#   FLTK2_BASE_LIBRARY   = the full path to fltk2.lib
+#   FLTK2_GL_LIBRARY     = the full path to fltk2_gl.lib
+#   FLTK2_IMAGES_LIBRARY = the full path to fltk2_images.lib
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set (FLTK2_DIR $ENV{FLTK2_DIR} )
+
+#  Platform dependent libraries required by FLTK2
+if(WIN32)
+  if(NOT CYGWIN)
+    if(BORLAND)
+      set( FLTK2_PLATFORM_DEPENDENT_LIBS import32 )
+    else()
+      set( FLTK2_PLATFORM_DEPENDENT_LIBS wsock32 comctl32 )
+    endif()
+  endif()
+endif()
+
+if(UNIX)
+  include(${CMAKE_ROOT}/Modules/FindX11.cmake)
+  set( FLTK2_PLATFORM_DEPENDENT_LIBS ${X11_LIBRARIES} -lm)
+endif()
+
+if(APPLE)
+  set( FLTK2_PLATFORM_DEPENDENT_LIBS  "-framework Carbon -framework Cocoa -framework ApplicationServices -lz")
+endif()
+
+# If FLTK2_INCLUDE_DIR is already defined we assign its value to FLTK2_DIR
+if(FLTK2_INCLUDE_DIR)
+  set(FLTK2_DIR ${FLTK2_INCLUDE_DIR})
+else()
+  set(FLTK2_INCLUDE_DIR ${FLTK2_DIR})
+endif()
+
+
+# If FLTK2 has been built using CMake we try to find everything directly
+set(FLTK2_DIR_STRING "directory containing FLTK2Config.cmake.  This is either the root of the build tree, or PREFIX/lib/fltk for an installation.")
+
+# Search only if the location is not already known.
+if(NOT FLTK2_DIR)
+  # Get the system search path as a list.
+  file(TO_CMAKE_PATH "$ENV{PATH}" FLTK2_DIR_SEARCH2)
+
+  # Construct a set of paths relative to the system search path.
+  set(FLTK2_DIR_SEARCH "")
+  foreach(dir ${FLTK2_DIR_SEARCH2})
+    set(FLTK2_DIR_SEARCH ${FLTK2_DIR_SEARCH} "${dir}/../lib/fltk")
+  endforeach()
+  string(REPLACE "//" "/" FLTK2_DIR_SEARCH "${FLTK2_DIR_SEARCH}")
+
+  #
+  # Look for an installation or build tree.
+  #
+  find_path(FLTK2_DIR FLTK2Config.cmake
+    # Look for an environment variable FLTK2_DIR.
+    ENV FLTK2_DIR
+
+    # Look in places relative to the system executable search path.
+    ${FLTK2_DIR_SEARCH}
+
+    # Look in standard UNIX install locations.
+    /usr/local/lib/fltk2
+    /usr/lib/fltk2
+    /usr/local/fltk2
+    /usr/X11R6/include
+
+    # Help the user find it if we cannot.
+    DOC "The ${FLTK2_DIR_STRING}"
+    )
+
+  if(NOT FLTK2_DIR)
+    find_path(FLTK2_DIR fltk/run.h ${FLTK2_INCLUDE_SEARCH_PATH})
+  endif()
+
+endif()
+
+
+# If FLTK2 was found, load the configuration file to get the rest of the
+# settings.
+if(FLTK2_DIR)
+
+  # Check if FLTK2 was built using CMake
+  if(EXISTS ${FLTK2_DIR}/FLTK2Config.cmake)
+    set(FLTK2_BUILT_WITH_CMAKE 1)
+  endif()
+
+  if(FLTK2_BUILT_WITH_CMAKE)
+    set(FLTK2_FOUND 1)
+    include(${FLTK2_DIR}/FLTK2Config.cmake)
+
+    # Fluid
+    if(FLUID_COMMAND)
+      set(FLTK2_FLUID_EXECUTABLE ${FLUID_COMMAND} CACHE FILEPATH "Fluid executable")
+    else()
+      find_program(FLTK2_FLUID_EXECUTABLE fluid2 PATHS
+        ${FLTK2_EXECUTABLE_DIRS}
+        ${FLTK2_EXECUTABLE_DIRS}/RelWithDebInfo
+        ${FLTK2_EXECUTABLE_DIRS}/Debug
+        ${FLTK2_EXECUTABLE_DIRS}/Release
+        NO_SYSTEM_PATH)
+    endif()
+
+    mark_as_advanced(FLTK2_FLUID_EXECUTABLE)
+    set( FLTK_FLUID_EXECUTABLE ${FLTK2_FLUID_EXECUTABLE} )
+
+
+
+
+    set(FLTK2_INCLUDE_DIR ${FLTK2_DIR})
+    link_directories(${FLTK2_LIBRARY_DIRS})
+
+    set(FLTK2_BASE_LIBRARY fltk2)
+    set(FLTK2_GL_LIBRARY fltk2_gl)
+    set(FLTK2_IMAGES_LIBRARY fltk2_images)
+
+    # Add the extra libraries
+    load_cache(${FLTK2_DIR}
+      READ_WITH_PREFIX
+      FL FLTK2_USE_SYSTEM_JPEG
+      FL FLTK2_USE_SYSTEM_PNG
+      FL FLTK2_USE_SYSTEM_ZLIB
+      )
+
+    set(FLTK2_IMAGES_LIBS "")
+    if(FLFLTK2_USE_SYSTEM_JPEG)
+      set(FLTK2_IMAGES_LIBS ${FLTK2_IMAGES_LIBS} fltk2_jpeg)
+    endif()
+    if(FLFLTK2_USE_SYSTEM_PNG)
+      set(FLTK2_IMAGES_LIBS ${FLTK2_IMAGES_LIBS} fltk2_png)
+    endif()
+    if(FLFLTK2_USE_SYSTEM_ZLIB)
+      set(FLTK2_IMAGES_LIBS ${FLTK2_IMAGES_LIBS} fltk2_zlib)
+    endif()
+    set(FLTK2_IMAGES_LIBS "${FLTK2_IMAGES_LIBS}" CACHE INTERNAL
+      "Extra libraries for fltk2_images library.")
+
+  else()
+
+    # if FLTK2 was not built using CMake
+    # Find fluid executable.
+    find_program(FLTK2_FLUID_EXECUTABLE fluid2 ${FLTK2_INCLUDE_DIR}/fluid)
+
+    # Use location of fluid to help find everything else.
+    set(FLTK2_INCLUDE_SEARCH_PATH "")
+    set(FLTK2_LIBRARY_SEARCH_PATH "")
+    if(FLTK2_FLUID_EXECUTABLE)
+      set( FLTK_FLUID_EXECUTABLE ${FLTK2_FLUID_EXECUTABLE} )
+      get_filename_component(FLTK2_BIN_DIR "${FLTK2_FLUID_EXECUTABLE}" PATH)
+      set(FLTK2_INCLUDE_SEARCH_PATH ${FLTK2_INCLUDE_SEARCH_PATH}
+        ${FLTK2_BIN_DIR}/../include ${FLTK2_BIN_DIR}/..)
+      set(FLTK2_LIBRARY_SEARCH_PATH ${FLTK2_LIBRARY_SEARCH_PATH}
+        ${FLTK2_BIN_DIR}/../lib)
+      set(FLTK2_WRAP_UI 1)
+    endif()
+
+    set(FLTK2_INCLUDE_SEARCH_PATH ${FLTK2_INCLUDE_SEARCH_PATH}
+      /usr/local/fltk2
+      /usr/X11R6/include
+      )
+
+    find_path(FLTK2_INCLUDE_DIR fltk/run.h ${FLTK2_INCLUDE_SEARCH_PATH})
+
+    set(FLTK2_LIBRARY_SEARCH_PATH ${FLTK2_LIBRARY_SEARCH_PATH}
+      /usr/local/fltk2/lib
+      /usr/X11R6/lib
+      ${FLTK2_INCLUDE_DIR}/lib
+      )
+
+    find_library(FLTK2_BASE_LIBRARY NAMES fltk2
+      PATHS ${FLTK2_LIBRARY_SEARCH_PATH})
+    find_library(FLTK2_GL_LIBRARY NAMES fltk2_gl
+      PATHS ${FLTK2_LIBRARY_SEARCH_PATH})
+    find_library(FLTK2_IMAGES_LIBRARY NAMES fltk2_images
+      PATHS ${FLTK2_LIBRARY_SEARCH_PATH})
+
+    # Find the extra libraries needed for the fltk_images library.
+    if(UNIX)
+      find_program(FLTK2_CONFIG_SCRIPT fltk2-config PATHS ${FLTK2_BIN_DIR})
+      if(FLTK2_CONFIG_SCRIPT)
+        exec_program(${FLTK2_CONFIG_SCRIPT} ARGS --use-images --ldflags
+          OUTPUT_VARIABLE FLTK2_IMAGES_LDFLAGS)
+        set(FLTK2_LIBS_EXTRACT_REGEX ".*-lfltk2_images (.*) -lfltk2.*")
+        if("${FLTK2_IMAGES_LDFLAGS}" MATCHES "${FLTK2_LIBS_EXTRACT_REGEX}")
+          string(REGEX REPLACE " +" ";" FLTK2_IMAGES_LIBS "${CMAKE_MATCH_1}")
+          # The EXEC_PROGRAM will not be inherited into subdirectories from
+          # the file that originally included this module.  Save the answer.
+          set(FLTK2_IMAGES_LIBS "${FLTK2_IMAGES_LIBS}" CACHE INTERNAL
+            "Extra libraries for fltk_images library.")
+        endif()
+      endif()
+    endif()
+
+  endif()
+endif()
+
+
+set(FLTK2_FOUND 1)
+foreach(var FLTK2_FLUID_EXECUTABLE FLTK2_INCLUDE_DIR
+    FLTK2_BASE_LIBRARY FLTK2_GL_LIBRARY
+    FLTK2_IMAGES_LIBRARY)
+  if(NOT ${var})
+    message( STATUS "${var} not found" )
+    set(FLTK2_FOUND 0)
+  endif()
+endforeach()
+
+
+if(FLTK2_FOUND)
+  set(FLTK2_LIBRARIES ${FLTK2_IMAGES_LIBRARY} ${FLTK2_IMAGES_LIBS} ${FLTK2_BASE_LIBRARY} ${FLTK2_GL_LIBRARY} )
+  if(APPLE)
+    set(FLTK2_LIBRARIES ${FLTK2_PLATFORM_DEPENDENT_LIBS} ${FLTK2_LIBRARIES})
+  else()
+    set(FLTK2_LIBRARIES ${FLTK2_LIBRARIES} ${FLTK2_PLATFORM_DEPENDENT_LIBS})
+  endif()
+
+  # The following deprecated settings are for compatibility with CMake 1.4
+  set (HAS_FLTK2 ${FLTK2_FOUND})
+  set (FLTK2_INCLUDE_PATH ${FLTK2_INCLUDE_DIR})
+  set (FLTK2_FLUID_EXE ${FLTK2_FLUID_EXECUTABLE})
+  set (FLTK2_LIBRARY ${FLTK2_LIBRARIES})
+else()
+  # make FIND_PACKAGE friendly
+  if(NOT FLTK2_FIND_QUIETLY)
+    if(FLTK2_FIND_REQUIRED)
+      message(FATAL_ERROR
+              "FLTK2 required, please specify its location with FLTK2_DIR.")
+    else()
+      message(STATUS "FLTK2 was not found.")
+    endif()
+  endif()
+endif()
+
diff --git a/share/cmake-3.2/Modules/FindFreetype.cmake b/share/cmake-3.6/Modules/FindFreetype.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindFreetype.cmake
rename to share/cmake-3.6/Modules/FindFreetype.cmake
diff --git a/share/cmake-3.2/Modules/FindGCCXML.cmake b/share/cmake-3.6/Modules/FindGCCXML.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGCCXML.cmake
rename to share/cmake-3.6/Modules/FindGCCXML.cmake
diff --git a/share/cmake-3.2/Modules/FindGDAL.cmake b/share/cmake-3.6/Modules/FindGDAL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGDAL.cmake
rename to share/cmake-3.6/Modules/FindGDAL.cmake
diff --git a/share/cmake-3.2/Modules/FindGIF.cmake b/share/cmake-3.6/Modules/FindGIF.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGIF.cmake
rename to share/cmake-3.6/Modules/FindGIF.cmake
diff --git a/share/cmake-3.2/Modules/FindGLEW.cmake b/share/cmake-3.6/Modules/FindGLEW.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGLEW.cmake
rename to share/cmake-3.6/Modules/FindGLEW.cmake
diff --git a/share/cmake-3.2/Modules/FindGLU.cmake b/share/cmake-3.6/Modules/FindGLU.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGLU.cmake
rename to share/cmake-3.6/Modules/FindGLU.cmake
diff --git a/share/cmake-3.2/Modules/FindGLUT.cmake b/share/cmake-3.6/Modules/FindGLUT.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGLUT.cmake
rename to share/cmake-3.6/Modules/FindGLUT.cmake
diff --git a/share/cmake-3.6/Modules/FindGSL.cmake b/share/cmake-3.6/Modules/FindGSL.cmake
new file mode 100644
index 0000000..9318a7d
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindGSL.cmake
@@ -0,0 +1,238 @@
+#.rst:
+# FindGSL
+# --------
+#
+# Find the native GSL includes and libraries.
+#
+# The GNU Scientific Library (GSL) is a numerical library for C and C++
+# programmers. It is free software under the GNU General Public
+# License.
+#
+# Imported Targets
+# ^^^^^^^^^^^^^^^^
+#
+# If GSL is found, this module defines the following :prop_tgt:`IMPORTED`
+# targets::
+#
+#  GSL::gsl      - The main GSL library.
+#  GSL::gslcblas - The CBLAS support library used by GSL.
+#
+# Result Variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module will set the following variables in your project::
+#
+#  GSL_FOUND          - True if GSL found on the local system
+#  GSL_INCLUDE_DIRS   - Location of GSL header files.
+#  GSL_LIBRARIES      - The GSL libraries.
+#  GSL_VERSION        - The version of the discovered GSL install.
+#
+# Hints
+# ^^^^^
+#
+# Set ``GSL_ROOT_DIR`` to a directory that contains a GSL installation.
+#
+# This script expects to find libraries at ``$GSL_ROOT_DIR/lib`` and the GSL
+# headers at ``$GSL_ROOT_DIR/include/gsl``.  The library directory may
+# optionally provide Release and Debug folders.  For Unix-like systems, this
+# script will use ``$GSL_ROOT_DIR/bin/gsl-config`` (if found) to aid in the
+# discovery GSL.
+#
+# Cache Variables
+# ^^^^^^^^^^^^^^^
+#
+# This module may set the following variables depending on platform and type
+# of GSL installation discovered.  These variables may optionally be set to
+# help this module find the correct files::
+#
+#  GSL_CBLAS_LIBRARY       - Location of the GSL CBLAS library.
+#  GSL_CBLAS_LIBRARY_DEBUG - Location of the debug GSL CBLAS library (if any).
+#  GSL_CONFIG_EXECUTABLE   - Location of the ``gsl-config`` script (if any).
+#  GSL_LIBRARY             - Location of the GSL library.
+#  GSL_LIBRARY_DEBUG       - Location of the debug GSL library (if any).
+#
+
+#=============================================================================
+# Copyright 2014 Kelly Thompson <kgt@lanl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Include these modules to handle the QUIETLY and REQUIRED arguments.
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+#=============================================================================
+# If the user has provided ``GSL_ROOT_DIR``, use it!  Choose items found
+# at this location over system locations.
+if( EXISTS "$ENV{GSL_ROOT_DIR}" )
+  file( TO_CMAKE_PATH "$ENV{GSL_ROOT_DIR}" GSL_ROOT_DIR )
+  set( GSL_ROOT_DIR "${GSL_ROOT_DIR}" CACHE PATH "Prefix for GSL installation." )
+endif()
+if( NOT EXISTS "${GSL_ROOT_DIR}" )
+  set( GSL_USE_PKGCONFIG ON )
+endif()
+
+#=============================================================================
+# As a first try, use the PkgConfig module.  This will work on many
+# *NIX systems.  See :module:`findpkgconfig`
+# This will return ``GSL_INCLUDEDIR`` and ``GSL_LIBDIR`` used below.
+if( GSL_USE_PKGCONFIG )
+  find_package(PkgConfig)
+  pkg_check_modules( GSL QUIET gsl )
+
+  if( EXISTS "${GSL_INCLUDEDIR}" )
+    get_filename_component( GSL_ROOT_DIR "${GSL_INCLUDEDIR}" DIRECTORY CACHE)
+  endif()
+endif()
+
+#=============================================================================
+# Set GSL_INCLUDE_DIRS and GSL_LIBRARIES. If we skipped the PkgConfig step, try
+# to find the libraries at $GSL_ROOT_DIR (if provided) or in standard system
+# locations.  These find_library and find_path calls will prefer custom
+# locations over standard locations (HINTS).  If the requested file is not found
+# at the HINTS location, standard system locations will be still be searched
+# (/usr/lib64 (Redhat), lib/i386-linux-gnu (Debian)).
+
+find_path( GSL_INCLUDE_DIR
+  NAMES gsl/gsl_sf.h
+  HINTS ${GSL_ROOT_DIR}/include ${GSL_INCLUDEDIR}
+)
+find_library( GSL_LIBRARY
+  NAMES gsl
+  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
+  PATH_SUFFIXES Release Debug
+)
+find_library( GSL_CBLAS_LIBRARY
+  NAMES gslcblas cblas
+  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
+  PATH_SUFFIXES Release Debug
+)
+# Do we also have debug versions?
+find_library( GSL_LIBRARY_DEBUG
+  NAMES gsl
+  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
+  PATH_SUFFIXES Debug
+)
+find_library( GSL_CBLAS_LIBRARY_DEBUG
+  NAMES gslcblas cblas
+  HINTS ${GSL_ROOT_DIR}/lib ${GSL_LIBDIR}
+  PATH_SUFFIXES Debug
+)
+set( GSL_INCLUDE_DIRS ${GSL_INCLUDE_DIR} )
+set( GSL_LIBRARIES ${GSL_LIBRARY} ${GSL_CBLAS_LIBRARY} )
+
+# If we didn't use PkgConfig, try to find the version via gsl-config or by
+# reading gsl_version.h.
+if( NOT GSL_VERSION )
+  # 1. If gsl-config exists, query for the version.
+  find_program( GSL_CONFIG_EXECUTABLE
+    NAMES gsl-config
+    HINTS "${GSL_ROOT_DIR}/bin"
+    )
+  if( EXISTS "${GSL_CONFIG_EXECUTABLE}" )
+    execute_process(
+      COMMAND "${GSL_CONFIG_EXECUTABLE}" --version
+      OUTPUT_VARIABLE GSL_VERSION
+      OUTPUT_STRIP_TRAILING_WHITESPACE )
+  endif()
+
+  # 2. If gsl-config is not available, try looking in gsl/gsl_version.h
+  if( NOT GSL_VERSION AND EXISTS "${GSL_INCLUDE_DIRS}/gsl/gsl_version.h" )
+    file( STRINGS "${GSL_INCLUDE_DIRS}/gsl/gsl_version.h" gsl_version_h_contents REGEX "define GSL_VERSION" )
+    string( REGEX REPLACE ".*([0-9].[0-9][0-9]).*" "\\1" GSL_VERSION ${gsl_version_h_contents} )
+  endif()
+
+  # might also try scraping the directory name for a regex match "gsl-X.X"
+endif()
+
+#=============================================================================
+# handle the QUIETLY and REQUIRED arguments and set GSL_FOUND to TRUE if all
+# listed variables are TRUE
+find_package_handle_standard_args( GSL
+  FOUND_VAR
+    GSL_FOUND
+  REQUIRED_VARS
+    GSL_INCLUDE_DIR
+    GSL_LIBRARY
+    GSL_CBLAS_LIBRARY
+  VERSION_VAR
+    GSL_VERSION
+    )
+
+mark_as_advanced( GSL_ROOT_DIR GSL_VERSION GSL_LIBRARY GSL_INCLUDE_DIR
+  GSL_CBLAS_LIBRARY GSL_LIBRARY_DEBUG GSL_CBLAS_LIBRARY_DEBUG
+  GSL_USE_PKGCONFIG GSL_CONFIG )
+
+#=============================================================================
+# Register imported libraries:
+# 1. If we can find a Windows .dll file (or if we can find both Debug and
+#    Release libraries), we will set appropriate target properties for these.
+# 2. However, for most systems, we will only register the import location and
+#    include directory.
+
+# Look for dlls, or Release and Debug libraries.
+if(WIN32)
+  string( REPLACE ".lib" ".dll" GSL_LIBRARY_DLL       "${GSL_LIBRARY}" )
+  string( REPLACE ".lib" ".dll" GSL_CBLAS_LIBRARY_DLL "${GSL_CBLAS_LIBRARY}" )
+  string( REPLACE ".lib" ".dll" GSL_LIBRARY_DEBUG_DLL "${GSL_LIBRARY_DEBUG}" )
+  string( REPLACE ".lib" ".dll" GSL_CBLAS_LIBRARY_DEBUG_DLL "${GSL_CBLAS_LIBRARY_DEBUG}" )
+endif()
+
+if( GSL_FOUND AND NOT TARGET GSL::gsl )
+  if( EXISTS "${GSL_LIBRARY_DLL}" AND EXISTS "${GSL_CBLAS_LIBRARY_DLL}")
+
+    # Windows systems with dll libraries.
+    add_library( GSL::gsl      SHARED IMPORTED )
+    add_library( GSL::gslcblas SHARED IMPORTED )
+
+    # Windows with dlls, but only Release libraries.
+    set_target_properties( GSL::gslcblas PROPERTIES
+      IMPORTED_LOCATION_RELEASE         "${GSL_CBLAS_LIBRARY_DLL}"
+      IMPORTED_IMPLIB                   "${GSL_CBLAS_LIBRARY}"
+      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
+      IMPORTED_CONFIGURATIONS           Release
+      IMPORTED_LINK_INTERFACE_LANGUAGES "C" )
+    set_target_properties( GSL::gsl PROPERTIES
+      IMPORTED_LOCATION_RELEASE         "${GSL_LIBRARY_DLL}"
+      IMPORTED_IMPLIB                   "${GSL_LIBRARY}"
+      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
+      IMPORTED_CONFIGURATIONS           Release
+      IMPORTED_LINK_INTERFACE_LANGUAGES "C"
+      INTERFACE_LINK_LIBRARIES          GSL::gslcblas )
+
+    # If we have both Debug and Release libraries
+    if( EXISTS "${GSL_LIBRARY_DEBUG_DLL}" AND EXISTS "${GSL_CBLAS_LIBRARY_DEBUG_DLL}")
+      set_property( TARGET GSL::gslcblas APPEND PROPERTY IMPORTED_CONFIGURATIONS Debug )
+      set_target_properties( GSL::gslcblas PROPERTIES
+        IMPORTED_LOCATION_DEBUG           "${GSL_CBLAS_LIBRARY_DEBUG_DLL}"
+        IMPORTED_IMPLIB_DEBUG             "${GSL_CBLAS_LIBRARY_DEBUG}" )
+      set_property( TARGET GSL::gsl APPEND PROPERTY IMPORTED_CONFIGURATIONS Debug )
+      set_target_properties( GSL::gsl PROPERTIES
+        IMPORTED_LOCATION_DEBUG           "${GSL_LIBRARY_DEBUG_DLL}"
+        IMPORTED_IMPLIB_DEBUG             "${GSL_LIBRARY_DEBUG}" )
+    endif()
+
+  else()
+
+    # For all other environments (ones without dll libraries), create
+    # the imported library targets.
+    add_library( GSL::gsl      UNKNOWN IMPORTED )
+    add_library( GSL::gslcblas UNKNOWN IMPORTED )
+    set_target_properties( GSL::gslcblas PROPERTIES
+      IMPORTED_LOCATION                 "${GSL_CBLAS_LIBRARY}"
+      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
+      IMPORTED_LINK_INTERFACE_LANGUAGES "C" )
+    set_target_properties( GSL::gsl PROPERTIES
+      IMPORTED_LOCATION                 "${GSL_LIBRARY}"
+      INTERFACE_INCLUDE_DIRECTORIES     "${GSL_INCLUDE_DIRS}"
+      IMPORTED_LINK_INTERFACE_LANGUAGES "C"
+      INTERFACE_LINK_LIBRARIES          GSL::gslcblas )
+  endif()
+endif()
diff --git a/share/cmake-3.2/Modules/FindGTK.cmake b/share/cmake-3.6/Modules/FindGTK.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGTK.cmake
rename to share/cmake-3.6/Modules/FindGTK.cmake
diff --git a/share/cmake-3.6/Modules/FindGTK2.cmake b/share/cmake-3.6/Modules/FindGTK2.cmake
new file mode 100644
index 0000000..6e4a7f2
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindGTK2.cmake
@@ -0,0 +1,971 @@
+#.rst:
+# FindGTK2
+# --------
+#
+# FindGTK2.cmake
+#
+# This module can find the GTK2 widget libraries and several of its
+# other optional components like gtkmm, glade, and glademm.
+#
+# NOTE: If you intend to use version checking, CMake 2.6.2 or later is
+#
+# ::
+#
+#        required.
+#
+#
+#
+# Specify one or more of the following components as you call this find
+# module.  See example below.
+#
+# ::
+#
+#    gtk
+#    gtkmm
+#    glade
+#    glademm
+#
+#
+#
+# The following variables will be defined for your use
+#
+# ::
+#
+#    GTK2_FOUND - Were all of your specified components found?
+#    GTK2_INCLUDE_DIRS - All include directories
+#    GTK2_LIBRARIES - All libraries
+#    GTK2_TARGETS - All imported targets
+#    GTK2_DEFINITIONS - Additional compiler flags
+#
+#
+#
+# ::
+#
+#    GTK2_VERSION - The version of GTK2 found (x.y.z)
+#    GTK2_MAJOR_VERSION - The major version of GTK2
+#    GTK2_MINOR_VERSION - The minor version of GTK2
+#    GTK2_PATCH_VERSION - The patch version of GTK2
+#
+#
+#
+# Optional variables you can define prior to calling this module:
+#
+# ::
+#
+#    GTK2_DEBUG - Enables verbose debugging of the module
+#    GTK2_ADDITIONAL_SUFFIXES - Allows defining additional directories to
+#                               search for include files
+#
+#
+#
+# ================= Example Usage:
+#
+# ::
+#
+#    Call find_package() once, here are some examples to pick from:
+#
+#
+#
+# ::
+#
+#    Require GTK 2.6 or later
+#        find_package(GTK2 2.6 REQUIRED gtk)
+#
+#
+#
+# ::
+#
+#    Require GTK 2.10 or later and Glade
+#        find_package(GTK2 2.10 REQUIRED gtk glade)
+#
+#
+#
+# ::
+#
+#    Search for GTK/GTKMM 2.8 or later
+#        find_package(GTK2 2.8 COMPONENTS gtk gtkmm)
+#
+#
+#
+# ::
+#
+#    if(GTK2_FOUND)
+#       include_directories(${GTK2_INCLUDE_DIRS})
+#       add_executable(mygui mygui.cc)
+#       target_link_libraries(mygui ${GTK2_LIBRARIES})
+#    endif()
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+# Copyright 2008-2012 Philip Lowman <philip@yhbt.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Version 1.6 (CMake 3.0)
+#   * Create targets for each library
+#   * Do not link libfreetype
+# Version 1.5 (CMake 2.8.12)
+#   * 14236: Detect gthread library
+#            Detect pangocairo on windows
+#            Detect pangocairo with gtk module instead of with gtkmm
+#   * 14259: Use vc100 libraries with MSVC11
+#   * 14260: Export a GTK2_DEFINITIONS variable to set /vd2 when appropriate
+#            (i.e. MSVC)
+#   * Use the optimized/debug syntax for _LIBRARY and _LIBRARIES variables when
+#     appropriate. A new set of _RELEASE variables was also added.
+#   * Remove GTK2_SKIP_MARK_AS_ADVANCED option, as now the variables are
+#     marked as advanced by SelectLibraryConfigurations
+#   * Detect gmodule, pangoft2 and pangoxft libraries
+# Version 1.4 (10/4/2012) (CMake 2.8.10)
+#   * 12596: Missing paths for FindGTK2 on NetBSD
+#   * 12049: Fixed detection of GTK include files in the lib folder on
+#            multiarch systems.
+# Version 1.3 (11/9/2010) (CMake 2.8.4)
+#   * 11429: Add support for detecting GTK2 built with Visual Studio 10.
+#            Thanks to Vincent Levesque for the patch.
+# Version 1.2 (8/30/2010) (CMake 2.8.3)
+#   * Merge patch for detecting gdk-pixbuf library (split off
+#     from core GTK in 2.21).  Thanks to Vincent Untz for the patch
+#     and Ricardo Cruz for the heads up.
+# Version 1.1 (8/19/2010) (CMake 2.8.3)
+#   * Add support for detecting GTK2 under macports (thanks to Gary Kramlich)
+# Version 1.0 (8/12/2010) (CMake 2.8.3)
+#   * Add support for detecting new pangommconfig.h header file
+#     (Thanks to Sune Vuorela & the Debian Project for the patch)
+#   * Add support for detecting fontconfig.h header
+#   * Call find_package(Freetype) since it's required
+#   * Add support for allowing users to add additional library directories
+#     via the GTK2_ADDITIONAL_SUFFIXES variable (kind of a future-kludge in
+#     case the GTK developers change versions on any of the directories in the
+#     future).
+# Version 0.8 (1/4/2010)
+#   * Get module working under MacOSX fink by adding /sw/include, /sw/lib
+#     to PATHS and the gobject library
+# Version 0.7 (3/22/09)
+#   * Checked into CMake CVS
+#   * Added versioning support
+#   * Module now defaults to searching for GTK if COMPONENTS not specified.
+#   * Added HKCU prior to HKLM registry key and GTKMM specific environment
+#      variable as per mailing list discussion.
+#   * Added lib64 to include search path and a few other search paths where GTK
+#      may be installed on Unix systems.
+#   * Switched to lowercase CMake commands
+#   * Prefaced internal variables with _GTK2 to prevent collision
+#   * Changed internal macros to functions
+#   * Enhanced documentation
+# Version 0.6 (1/8/08)
+#   Added GTK2_SKIP_MARK_AS_ADVANCED option
+# Version 0.5 (12/19/08)
+#   Second release to cmake mailing list
+
+#=============================================================
+# _GTK2_GET_VERSION
+# Internal function to parse the version number in gtkversion.h
+#   _OUT_major = Major version number
+#   _OUT_minor = Minor version number
+#   _OUT_micro = Micro version number
+#   _gtkversion_hdr = Header file to parse
+#=============================================================
+
+include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
+
+function(_GTK2_GET_VERSION _OUT_major _OUT_minor _OUT_micro _gtkversion_hdr)
+    file(STRINGS ${_gtkversion_hdr} _contents REGEX "#define GTK_M[A-Z]+_VERSION[ \t]+")
+    if(_contents)
+        string(REGEX REPLACE ".*#define GTK_MAJOR_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_major} "${_contents}")
+        string(REGEX REPLACE ".*#define GTK_MINOR_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_minor} "${_contents}")
+        string(REGEX REPLACE ".*#define GTK_MICRO_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_micro} "${_contents}")
+
+        if(NOT ${_OUT_major} MATCHES "[0-9]+")
+            message(FATAL_ERROR "Version parsing failed for GTK2_MAJOR_VERSION!")
+        endif()
+        if(NOT ${_OUT_minor} MATCHES "[0-9]+")
+            message(FATAL_ERROR "Version parsing failed for GTK2_MINOR_VERSION!")
+        endif()
+        if(NOT ${_OUT_micro} MATCHES "[0-9]+")
+            message(FATAL_ERROR "Version parsing failed for GTK2_MICRO_VERSION!")
+        endif()
+
+        set(${_OUT_major} ${${_OUT_major}} PARENT_SCOPE)
+        set(${_OUT_minor} ${${_OUT_minor}} PARENT_SCOPE)
+        set(${_OUT_micro} ${${_OUT_micro}} PARENT_SCOPE)
+    else()
+        message(FATAL_ERROR "Include file ${_gtkversion_hdr} does not exist")
+    endif()
+endfunction()
+
+
+#=============================================================
+# _GTK2_SIGCXX_GET_VERSION
+# Internal function to parse the version number in
+# sigc++config.h
+#   _OUT_major = Major version number
+#   _OUT_minor = Minor version number
+#   _OUT_micro = Micro version number
+#   _sigcxxversion_hdr = Header file to parse
+#=============================================================
+
+function(_GTK2_SIGCXX_GET_VERSION _OUT_major _OUT_minor _OUT_micro _sigcxxversion_hdr)
+    file(STRINGS ${_sigcxxversion_hdr} _contents REGEX "#define SIGCXX_M[A-Z]+_VERSION[ \t]+")
+    if(_contents)
+        string(REGEX REPLACE ".*#define SIGCXX_MAJOR_VERSION[ \t]+([0-9]+).*" "\\1" ${_OUT_major} "${_contents}")
+        string(REGEX REPLACE ".*#define SIGCXX_MINOR_VERSION[ \t]+([0-9]+).*" "\\1" ${_OUT_minor} "${_contents}")
+        string(REGEX REPLACE ".*#define SIGCXX_MICRO_VERSION[ \t]+([0-9]+).*" "\\1" ${_OUT_micro} "${_contents}")
+
+        if(NOT ${_OUT_major} MATCHES "[0-9]+")
+            message(FATAL_ERROR "Version parsing failed for SIGCXX_MAJOR_VERSION!")
+        endif()
+        if(NOT ${_OUT_minor} MATCHES "[0-9]+")
+            message(FATAL_ERROR "Version parsing failed for SIGCXX_MINOR_VERSION!")
+        endif()
+        if(NOT ${_OUT_micro} MATCHES "[0-9]+")
+            message(FATAL_ERROR "Version parsing failed for SIGCXX_MICRO_VERSION!")
+        endif()
+
+        set(${_OUT_major} ${${_OUT_major}} PARENT_SCOPE)
+        set(${_OUT_minor} ${${_OUT_minor}} PARENT_SCOPE)
+        set(${_OUT_micro} ${${_OUT_micro}} PARENT_SCOPE)
+    else()
+        message(FATAL_ERROR "Include file ${_gtkversion_hdr} does not exist")
+    endif()
+endfunction()
+
+
+#=============================================================
+# _GTK2_FIND_INCLUDE_DIR
+# Internal function to find the GTK include directories
+#   _var = variable to set (_INCLUDE_DIR is appended)
+#   _hdr = header file to look for
+#=============================================================
+function(_GTK2_FIND_INCLUDE_DIR _var _hdr)
+
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
+                       "_GTK2_FIND_INCLUDE_DIR( ${_var} ${_hdr} )")
+    endif()
+
+    set(_gtk_packages
+        # If these ever change, things will break.
+        ${GTK2_ADDITIONAL_SUFFIXES}
+        glibmm-2.4
+        glib-2.0
+        atk-1.0
+        atkmm-1.6
+        cairo
+        cairomm-1.0
+        gdk-pixbuf-2.0
+        gdkmm-2.4
+        giomm-2.4
+        gtk-2.0
+        gtkmm-2.4
+        libglade-2.0
+        libglademm-2.4
+        pango-1.0
+        pangomm-1.4
+        sigc++-2.0
+    )
+
+    #
+    # NOTE: The following suffixes cause searching for header files in both of
+    # these directories:
+    #         /usr/include/<pkg>
+    #         /usr/lib/<pkg>/include
+    #
+
+    set(_suffixes)
+    foreach(_d ${_gtk_packages})
+        list(APPEND _suffixes ${_d})
+        list(APPEND _suffixes ${_d}/include) # for /usr/lib/gtk-2.0/include
+    endforeach()
+
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "include suffixes = ${_suffixes}")
+    endif()
+
+    if(CMAKE_LIBRARY_ARCHITECTURE)
+      set(_gtk2_arch_dir /usr/lib/${CMAKE_LIBRARY_ARCHITECTURE})
+      if(GTK2_DEBUG)
+        message(STATUS "Adding ${_gtk2_arch_dir} to search path for multiarch support")
+      endif()
+    endif()
+    find_path(GTK2_${_var}_INCLUDE_DIR ${_hdr}
+        PATHS
+            ${_gtk2_arch_dir}
+            /usr/local/lib64
+            /usr/local/lib
+            /usr/lib64
+            /usr/lib
+            /usr/X11R6/include
+            /usr/X11R6/lib
+            /opt/gnome/include
+            /opt/gnome/lib
+            /opt/openwin/include
+            /usr/openwin/lib
+            /sw/include
+            /sw/lib
+            /opt/local/include
+            /opt/local/lib
+            /usr/pkg/lib
+            /usr/pkg/include/glib
+            $ENV{GTKMM_BASEPATH}/include
+            $ENV{GTKMM_BASEPATH}/lib
+            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/include
+            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/lib
+            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/include
+            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/lib
+        PATH_SUFFIXES
+            ${_suffixes}
+    )
+    mark_as_advanced(GTK2_${_var}_INCLUDE_DIR)
+
+    if(GTK2_${_var}_INCLUDE_DIR)
+        set(GTK2_INCLUDE_DIRS ${GTK2_INCLUDE_DIRS} ${GTK2_${_var}_INCLUDE_DIR} PARENT_SCOPE)
+    endif()
+
+endfunction()
+
+#=============================================================
+# _GTK2_FIND_LIBRARY
+# Internal function to find libraries packaged with GTK2
+#   _var = library variable to create (_LIBRARY is appended)
+#=============================================================
+function(_GTK2_FIND_LIBRARY _var _lib _expand_vc _append_version)
+
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
+                       "_GTK2_FIND_LIBRARY( ${_var} ${_lib} ${_expand_vc} ${_append_version} )")
+    endif()
+
+    # Not GTK versions per se but the versions encoded into Windows
+    # import libraries (GtkMM 2.14.1 has a gtkmm-vc80-2_4.lib for example)
+    # Also the MSVC libraries use _ for . (this is handled below)
+    set(_versions 2.20 2.18 2.16 2.14 2.12
+                  2.10  2.8  2.6  2.4  2.2 2.0
+                  1.20 1.18 1.16 1.14 1.12
+                  1.10  1.8  1.6  1.4  1.2 1.0)
+
+    set(_library)
+    set(_library_d)
+
+    set(_library ${_lib})
+
+    if(_expand_vc AND MSVC)
+        # Add vc80/vc90/vc100 midfixes
+        if(MSVC80)
+            set(_library   ${_library}-vc80)
+        elseif(MSVC90)
+            set(_library   ${_library}-vc90)
+        elseif(MSVC10)
+            set(_library ${_library}-vc100)
+        elseif(MSVC11)
+            # Up to gtkmm-win 2.22.0-2 there are no vc110 libraries but vc100 can be used
+            set(_library ${_library}-vc100)
+        endif()
+        set(_library_d ${_library}-d)
+    endif()
+
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "After midfix addition = ${_library} and ${_library_d}")
+    endif()
+
+    set(_lib_list)
+    set(_libd_list)
+    if(_append_version)
+        foreach(_ver ${_versions})
+            list(APPEND _lib_list  "${_library}-${_ver}")
+            list(APPEND _libd_list "${_library_d}-${_ver}")
+        endforeach()
+    else()
+        set(_lib_list ${_library})
+        set(_libd_list ${_library_d})
+    endif()
+
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "library list = ${_lib_list} and library debug list = ${_libd_list}")
+    endif()
+
+    # For some silly reason the MSVC libraries use _ instead of .
+    # in the version fields
+    if(_expand_vc AND MSVC)
+        set(_no_dots_lib_list)
+        set(_no_dots_libd_list)
+        foreach(_l ${_lib_list})
+            string(REPLACE "." "_" _no_dots_library ${_l})
+            list(APPEND _no_dots_lib_list ${_no_dots_library})
+        endforeach()
+        # And for debug
+        set(_no_dots_libsd_list)
+        foreach(_l ${_libd_list})
+            string(REPLACE "." "_" _no_dots_libraryd ${_l})
+            list(APPEND _no_dots_libd_list ${_no_dots_libraryd})
+        endforeach()
+
+        # Copy list back to original names
+        set(_lib_list ${_no_dots_lib_list})
+        set(_libd_list ${_no_dots_libd_list})
+    endif()
+
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "While searching for GTK2_${_var}_LIBRARY, our proposed library list is ${_lib_list}")
+    endif()
+
+    find_library(GTK2_${_var}_LIBRARY_RELEASE
+        NAMES ${_lib_list}
+        PATHS
+            /opt/gnome/lib
+            /usr/openwin/lib
+            /sw/lib
+            $ENV{GTKMM_BASEPATH}/lib
+            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/lib
+            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/lib
+        )
+
+    if(_expand_vc AND MSVC)
+        if(GTK2_DEBUG)
+            message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                           "While searching for GTK2_${_var}_LIBRARY_DEBUG our proposed library list is ${_libd_list}")
+        endif()
+
+        find_library(GTK2_${_var}_LIBRARY_DEBUG
+            NAMES ${_libd_list}
+            PATHS
+            $ENV{GTKMM_BASEPATH}/lib
+            [HKEY_CURRENT_USER\\SOFTWARE\\gtkmm\\2.4;Path]/lib
+            [HKEY_LOCAL_MACHINE\\SOFTWARE\\gtkmm\\2.4;Path]/lib
+        )
+    endif()
+
+    select_library_configurations(GTK2_${_var})
+
+    set(GTK2_${_var}_LIBRARY ${GTK2_${_var}_LIBRARY} PARENT_SCOPE)
+    set(GTK2_${_var}_FOUND ${GTK2_${_var}_FOUND} PARENT_SCOPE)
+
+    if(GTK2_${_var}_FOUND)
+        set(GTK2_LIBRARIES ${GTK2_LIBRARIES} ${GTK2_${_var}_LIBRARY})
+        set(GTK2_LIBRARIES ${GTK2_LIBRARIES} PARENT_SCOPE)
+    endif()
+
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "GTK2_${_var}_LIBRARY_RELEASE = \"${GTK2_${_var}_LIBRARY_RELEASE}\"")
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "GTK2_${_var}_LIBRARY_DEBUG   = \"${GTK2_${_var}_LIBRARY_DEBUG}\"")
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "GTK2_${_var}_LIBRARY         = \"${GTK2_${_var}_LIBRARY}\"")
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}]     "
+                       "GTK2_${_var}_FOUND           = \"${GTK2_${_var}_FOUND}\"")
+    endif()
+
+endfunction()
+
+
+function(_GTK2_ADD_TARGET_DEPENDS_INTERNAL _var _property)
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
+                       "_GTK2_ADD_TARGET_DEPENDS_INTERNAL( ${_var} ${_property} )")
+    endif()
+
+    string(TOLOWER "${_var}" _basename)
+
+    if (TARGET GTK2::${_basename})
+        foreach(_depend ${ARGN})
+            set(_valid_depends)
+            if (TARGET GTK2::${_depend})
+                list(APPEND _valid_depends GTK2::${_depend})
+            endif()
+            if (_valid_depends)
+                set_property(TARGET GTK2::${_basename} APPEND PROPERTY ${_property} "${_valid_depends}")
+            endif()
+            set(_valid_depends)
+        endforeach()
+    endif()
+endfunction()
+
+function(_GTK2_ADD_TARGET_DEPENDS _var)
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
+                       "_GTK2_ADD_TARGET_DEPENDS( ${_var} )")
+    endif()
+
+    string(TOLOWER "${_var}" _basename)
+
+    if(TARGET GTK2::${_basename})
+        get_target_property(_configs GTK2::${_basename} IMPORTED_CONFIGURATIONS)
+        _GTK2_ADD_TARGET_DEPENDS_INTERNAL(${_var} INTERFACE_LINK_LIBRARIES ${ARGN})
+        foreach(_config ${_configs})
+            _GTK2_ADD_TARGET_DEPENDS_INTERNAL(${_var} IMPORTED_LINK_INTERFACE_LIBRARIES_${_config} ${ARGN})
+        endforeach()
+    endif()
+endfunction()
+
+function(_GTK2_ADD_TARGET_INCLUDE_DIRS _var)
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
+                       "_GTK2_ADD_TARGET_INCLUDE_DIRS( ${_var} )")
+    endif()
+
+    string(TOLOWER "${_var}" _basename)
+
+    if(TARGET GTK2::${_basename})
+        foreach(_include ${ARGN})
+            set_property(TARGET GTK2::${_basename} APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${_include}")
+        endforeach()
+    endif()
+endfunction()
+
+#=============================================================
+# _GTK2_ADD_TARGET
+# Internal function to create targets for GTK2
+#   _var = target to create
+#=============================================================
+function(_GTK2_ADD_TARGET _var)
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
+                       "_GTK2_ADD_TARGET( ${_var} )")
+    endif()
+
+    string(TOLOWER "${_var}" _basename)
+
+    cmake_parse_arguments(_${_var} "" "" "GTK2_DEPENDS;GTK2_OPTIONAL_DEPENDS;OPTIONAL_INCLUDES" ${ARGN})
+
+    if(GTK2_${_var}_FOUND AND NOT TARGET GTK2::${_basename})
+        # Do not create the target if dependencies are missing
+        foreach(_dep ${_${_var}_GTK2_DEPENDS})
+            if(NOT TARGET GTK2::${_dep})
+                return()
+            endif()
+        endforeach()
+
+        add_library(GTK2::${_basename} UNKNOWN IMPORTED)
+
+        set(GTK2_TARGETS ${GTK2_TARGETS} GTK2::${_basename})
+        set(GTK2_TARGETS ${GTK2_TARGETS} PARENT_SCOPE)
+
+        if(GTK2_${_var}_LIBRARY_RELEASE)
+            set_property(TARGET GTK2::${_basename} APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE)
+            set_property(TARGET GTK2::${_basename}        PROPERTY IMPORTED_LOCATION_RELEASE "${GTK2_${_var}_LIBRARY_RELEASE}" )
+        endif()
+
+        if(GTK2_${_var}_LIBRARY_DEBUG)
+            set_property(TARGET GTK2::${_basename} APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG)
+            set_property(TARGET GTK2::${_basename}        PROPERTY IMPORTED_LOCATION_DEBUG "${GTK2_${_var}_LIBRARY_DEBUG}" )
+        endif()
+
+        if(GTK2_${_var}_INCLUDE_DIR)
+            set_property(TARGET GTK2::${_basename} APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${GTK2_${_var}_INCLUDE_DIR}")
+        endif()
+
+        if(GTK2_${_var}CONFIG_INCLUDE_DIR AND NOT "x${GTK2_${_var}CONFIG_INCLUDE_DIR}" STREQUAL "x${GTK2_${_var}_INCLUDE_DIR}")
+            set_property(TARGET GTK2::${_basename} APPEND PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${GTK2_${_var}CONFIG_INCLUDE_DIR}")
+        endif()
+
+        if(GTK2_DEFINITIONS)
+            set_property(TARGET GTK2::${_basename} PROPERTY INTERFACE_COMPILE_DEFINITIONS "${GTK2_DEFINITIONS}")
+        endif()
+
+        if(_${_var}_GTK2_DEPENDS)
+            _GTK2_ADD_TARGET_DEPENDS(${_var} ${_${_var}_GTK2_DEPENDS} ${_${_var}_GTK2_OPTIONAL_DEPENDS})
+        endif()
+
+        if(_${_var}_OPTIONAL_INCLUDES)
+            foreach(_D ${_${_var}_OPTIONAL_INCLUDES})
+                if(_D)
+                    _GTK2_ADD_TARGET_INCLUDE_DIRS(${_var} ${_D})
+                endif()
+            endforeach()
+        endif()
+
+        if(GTK2_USE_IMPORTED_TARGETS)
+            set(GTK2_${_var}_LIBRARY GTK2::${_basename} PARENT_SCOPE)
+        endif()
+
+    endif()
+endfunction()
+
+
+
+#=============================================================
+
+#
+# main()
+#
+
+set(GTK2_FOUND)
+set(GTK2_INCLUDE_DIRS)
+set(GTK2_LIBRARIES)
+set(GTK2_TARGETS)
+set(GTK2_DEFINITIONS)
+
+if(NOT GTK2_FIND_COMPONENTS)
+    # Assume they only want GTK
+    set(GTK2_FIND_COMPONENTS gtk)
+endif()
+
+#
+# If specified, enforce version number
+#
+if(GTK2_FIND_VERSION)
+    set(GTK2_FAILED_VERSION_CHECK true)
+    if(GTK2_DEBUG)
+        message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] "
+                       "Searching for version ${GTK2_FIND_VERSION}")
+    endif()
+    _GTK2_FIND_INCLUDE_DIR(GTK gtk/gtk.h)
+    if(GTK2_GTK_INCLUDE_DIR)
+        _GTK2_GET_VERSION(GTK2_MAJOR_VERSION
+                          GTK2_MINOR_VERSION
+                          GTK2_PATCH_VERSION
+                          ${GTK2_GTK_INCLUDE_DIR}/gtk/gtkversion.h)
+        set(GTK2_VERSION
+            ${GTK2_MAJOR_VERSION}.${GTK2_MINOR_VERSION}.${GTK2_PATCH_VERSION})
+        if(GTK2_FIND_VERSION_EXACT)
+            if(GTK2_VERSION VERSION_EQUAL GTK2_FIND_VERSION)
+                set(GTK2_FAILED_VERSION_CHECK false)
+            endif()
+        else()
+            if(GTK2_VERSION VERSION_EQUAL   GTK2_FIND_VERSION OR
+               GTK2_VERSION VERSION_GREATER GTK2_FIND_VERSION)
+                set(GTK2_FAILED_VERSION_CHECK false)
+            endif()
+        endif()
+    else()
+        # If we can't find the GTK include dir, we can't do version checking
+        if(GTK2_FIND_REQUIRED AND NOT GTK2_FIND_QUIETLY)
+            message(FATAL_ERROR "Could not find GTK2 include directory")
+        endif()
+        return()
+    endif()
+
+    if(GTK2_FAILED_VERSION_CHECK)
+        if(GTK2_FIND_REQUIRED AND NOT GTK2_FIND_QUIETLY)
+            if(GTK2_FIND_VERSION_EXACT)
+                message(FATAL_ERROR "GTK2 version check failed.  Version ${GTK2_VERSION} was found, version ${GTK2_FIND_VERSION} is needed exactly.")
+            else()
+                message(FATAL_ERROR "GTK2 version check failed.  Version ${GTK2_VERSION} was found, at least version ${GTK2_FIND_VERSION} is required")
+            endif()
+        endif()
+
+        # If the version check fails, exit out of the module here
+        return()
+    endif()
+endif()
+
+#
+# On MSVC, according to https://wiki.gnome.org/gtkmm/MSWindows, the /vd2 flag needs to be
+# passed to the compiler in order to use gtkmm
+#
+if(MSVC)
+    foreach(_GTK2_component ${GTK2_FIND_COMPONENTS})
+        if(_GTK2_component STREQUAL "gtkmm")
+            set(GTK2_DEFINITIONS "/vd2")
+        elseif(_GTK2_component STREQUAL "glademm")
+            set(GTK2_DEFINITIONS "/vd2")
+        endif()
+    endforeach()
+endif()
+
+#
+# Find all components
+#
+
+find_package(Freetype QUIET)
+if(FREETYPE_INCLUDE_DIR_ft2build AND FREETYPE_INCLUDE_DIR_freetype2)
+    list(APPEND GTK2_INCLUDE_DIRS ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2})
+endif()
+
+foreach(_GTK2_component ${GTK2_FIND_COMPONENTS})
+    if(_GTK2_component STREQUAL "gtk")
+        # Left for compatibility with previous versions.
+        _GTK2_FIND_INCLUDE_DIR(FONTCONFIG fontconfig/fontconfig.h)
+        _GTK2_FIND_INCLUDE_DIR(X11 X11/Xlib.h)
+
+        _GTK2_FIND_INCLUDE_DIR(GLIB glib.h)
+        _GTK2_FIND_INCLUDE_DIR(GLIBCONFIG glibconfig.h)
+        _GTK2_FIND_LIBRARY    (GLIB glib false true)
+        _GTK2_ADD_TARGET      (GLIB)
+
+        _GTK2_FIND_INCLUDE_DIR(GOBJECT glib-object.h)
+        _GTK2_FIND_LIBRARY    (GOBJECT gobject false true)
+        _GTK2_ADD_TARGET      (GOBJECT GTK2_DEPENDS glib)
+
+        _GTK2_FIND_INCLUDE_DIR(ATK atk/atk.h)
+        _GTK2_FIND_LIBRARY    (ATK atk false true)
+        _GTK2_ADD_TARGET      (ATK GTK2_DEPENDS gobject glib)
+
+        _GTK2_FIND_LIBRARY    (GIO gio false true)
+        _GTK2_ADD_TARGET      (GIO GTK2_DEPENDS gobject glib)
+
+        _GTK2_FIND_LIBRARY    (GTHREAD gthread false true)
+        _GTK2_ADD_TARGET      (GTHREAD GTK2_DEPENDS glib)
+
+        _GTK2_FIND_LIBRARY    (GMODULE gmodule false true)
+        _GTK2_ADD_TARGET      (GMODULE GTK2_DEPENDS glib)
+
+        _GTK2_FIND_INCLUDE_DIR(GDK_PIXBUF gdk-pixbuf/gdk-pixbuf.h)
+        _GTK2_FIND_LIBRARY    (GDK_PIXBUF gdk_pixbuf false true)
+        _GTK2_ADD_TARGET      (GDK_PIXBUF GTK2_DEPENDS gobject glib)
+
+        _GTK2_FIND_INCLUDE_DIR(CAIRO cairo.h)
+        _GTK2_FIND_LIBRARY    (CAIRO cairo false false)
+        _GTK2_ADD_TARGET      (CAIRO)
+
+        _GTK2_FIND_INCLUDE_DIR(PANGO pango/pango.h)
+        _GTK2_FIND_LIBRARY    (PANGO pango false true)
+        _GTK2_ADD_TARGET      (PANGO GTK2_DEPENDS gobject glib)
+
+        _GTK2_FIND_LIBRARY    (PANGOCAIRO pangocairo false true)
+        _GTK2_ADD_TARGET      (PANGOCAIRO GTK2_DEPENDS pango cairo gobject glib)
+
+        _GTK2_FIND_LIBRARY    (PANGOFT2 pangoft2 false true)
+        _GTK2_ADD_TARGET      (PANGOFT2 GTK2_DEPENDS pango gobject glib
+                                        OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                          ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                          ${GTK2_X11_INCLUDE_DIR})
+
+        _GTK2_FIND_LIBRARY    (PANGOXFT pangoxft false true)
+        _GTK2_ADD_TARGET      (PANGOXFT GTK2_DEPENDS pangoft2 pango gobject glib
+                                        OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                          ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                          ${GTK2_X11_INCLUDE_DIR})
+
+        _GTK2_FIND_INCLUDE_DIR(GDK gdk/gdk.h)
+        _GTK2_FIND_INCLUDE_DIR(GDKCONFIG gdkconfig.h)
+        if(UNIX)
+            if(APPLE)
+                _GTK2_FIND_LIBRARY    (GDK gdk-quartz false true)
+            endif()
+            if(NOT GTK2_GDK_FOUND)
+                _GTK2_FIND_LIBRARY    (GDK gdk-x11 false true)
+            endif()
+        else()
+            _GTK2_FIND_LIBRARY    (GDK gdk-win32 false true)
+        endif()
+        _GTK2_ADD_TARGET (GDK GTK2_DEPENDS pango gdk_pixbuf gobject glib
+                              GTK2_OPTIONAL_DEPENDS pangocairo cairo)
+
+        _GTK2_FIND_INCLUDE_DIR(GTK gtk/gtk.h)
+        if(UNIX)
+            if(APPLE)
+                _GTK2_FIND_LIBRARY    (GTK gtk-quartz false true)
+            endif()
+            if(NOT GTK2_GTK_FOUND)
+                _GTK2_FIND_LIBRARY    (GTK gtk-x11 false true)
+            endif()
+        else()
+            _GTK2_FIND_LIBRARY    (GTK gtk-win32 false true)
+        endif()
+        _GTK2_ADD_TARGET (GTK GTK2_DEPENDS gdk atk pangoft2 pango gdk_pixbuf gthread gobject glib
+                              GTK2_OPTIONAL_DEPENDS gio pangocairo cairo)
+
+    elseif(_GTK2_component STREQUAL "gtkmm")
+
+        _GTK2_FIND_INCLUDE_DIR(SIGC++ sigc++/sigc++.h)
+        _GTK2_FIND_INCLUDE_DIR(SIGC++CONFIG sigc++config.h)
+        _GTK2_FIND_LIBRARY    (SIGC++ sigc true true)
+        _GTK2_ADD_TARGET      (SIGC++)
+        # Since sigc++ 2.5.1 c++11 support is required
+        if(GTK2_SIGC++CONFIG_INCLUDE_DIR)
+            _GTK2_SIGCXX_GET_VERSION(GTK2_SIGC++_VERSION_MAJOR
+                                     GTK2_SIGC++_VERSION_MINOR
+                                     GTK2_SIGC++_VERSION_MICRO
+                                     ${GTK2_SIGC++CONFIG_INCLUDE_DIR}/sigc++config.h)
+            if(NOT ${GTK2_SIGC++_VERSION_MAJOR}.${GTK2_SIGC++_VERSION_MINOR}.${GTK2_SIGC++_VERSION_MICRO} VERSION_LESS 2.5.1)
+                # These are the features needed by clients in order to include the
+                # project headers:
+                set_property(TARGET GTK2::sigc++
+                             PROPERTY INTERFACE_COMPILE_FEATURES cxx_alias_templates
+                                                                 cxx_auto_type
+                                                                 cxx_decltype
+                                                                 cxx_deleted_functions
+                                                                 cxx_noexcept
+                                                                 cxx_nullptr
+                                                                 cxx_right_angle_brackets
+                                                                 cxx_rvalue_references
+                                                                 cxx_variadic_templates)
+            endif()
+        endif()
+
+        _GTK2_FIND_INCLUDE_DIR(GLIBMM glibmm.h)
+        _GTK2_FIND_INCLUDE_DIR(GLIBMMCONFIG glibmmconfig.h)
+        _GTK2_FIND_LIBRARY    (GLIBMM glibmm true true)
+        _GTK2_ADD_TARGET      (GLIBMM GTK2_DEPENDS gobject sigc++ glib)
+
+        _GTK2_FIND_INCLUDE_DIR(GIOMM giomm.h)
+        _GTK2_FIND_INCLUDE_DIR(GIOMMCONFIG giommconfig.h)
+        _GTK2_FIND_LIBRARY    (GIOMM giomm true true)
+        _GTK2_ADD_TARGET      (GIOMM GTK2_DEPENDS gio glibmm gobject sigc++ glib)
+
+        _GTK2_FIND_INCLUDE_DIR(ATKMM atkmm.h)
+        _GTK2_FIND_LIBRARY    (ATKMM atkmm true true)
+        _GTK2_ADD_TARGET      (ATKMM GTK2_DEPENDS atk glibmm gobject sigc++ glib)
+
+        _GTK2_FIND_INCLUDE_DIR(CAIROMM cairomm/cairomm.h)
+        _GTK2_FIND_INCLUDE_DIR(CAIROMMCONFIG cairommconfig.h)
+        _GTK2_FIND_LIBRARY    (CAIROMM cairomm true true)
+        _GTK2_ADD_TARGET      (CAIROMM GTK2_DEPENDS cairo sigc++
+                                       OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                         ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                         ${GTK2_X11_INCLUDE_DIR})
+
+        _GTK2_FIND_INCLUDE_DIR(PANGOMM pangomm.h)
+        _GTK2_FIND_INCLUDE_DIR(PANGOMMCONFIG pangommconfig.h)
+        _GTK2_FIND_LIBRARY    (PANGOMM pangomm true true)
+        _GTK2_ADD_TARGET      (PANGOMM GTK2_DEPENDS glibmm sigc++ pango gobject glib
+                                       GTK2_OPTIONAL_DEPENDS cairomm pangocairo cairo
+                                       OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                         ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                         ${GTK2_X11_INCLUDE_DIR})
+
+        _GTK2_FIND_INCLUDE_DIR(GDKMM gdkmm.h)
+        _GTK2_FIND_INCLUDE_DIR(GDKMMCONFIG gdkmmconfig.h)
+        _GTK2_FIND_LIBRARY    (GDKMM gdkmm true true)
+        _GTK2_ADD_TARGET      (GDKMM GTK2_DEPENDS pangomm gtk glibmm sigc++ gdk atk pangoft2 gdk_pixbuf pango gobject glib
+                                     GTK2_OPTIONAL_DEPENDS giomm cairomm gio pangocairo cairo
+                                     OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                       ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                       ${GTK2_X11_INCLUDE_DIR})
+
+        _GTK2_FIND_INCLUDE_DIR(GTKMM gtkmm.h)
+        _GTK2_FIND_INCLUDE_DIR(GTKMMCONFIG gtkmmconfig.h)
+        _GTK2_FIND_LIBRARY    (GTKMM gtkmm true true)
+        _GTK2_ADD_TARGET      (GTKMM GTK2_DEPENDS atkmm gdkmm pangomm gtk glibmm sigc++ gdk atk pangoft2 gdk_pixbuf pango gthread gobject glib
+                                     GTK2_OPTIONAL_DEPENDS giomm cairomm gio pangocairo cairo
+                                     OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                       ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                       ${GTK2_X11_INCLUDE_DIR})
+
+    elseif(_GTK2_component STREQUAL "glade")
+
+        _GTK2_FIND_INCLUDE_DIR(GLADE glade/glade.h)
+        _GTK2_FIND_LIBRARY    (GLADE glade false true)
+        _GTK2_ADD_TARGET      (GLADE GTK2_DEPENDS gtk gdk atk gio pangoft2 gdk_pixbuf pango gobject glib
+                                     GTK2_OPTIONAL_DEPENDS pangocairo cairo
+                                     OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                       ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                       ${GTK2_X11_INCLUDE_DIR})
+
+    elseif(_GTK2_component STREQUAL "glademm")
+
+        _GTK2_FIND_INCLUDE_DIR(GLADEMM libglademm.h)
+        _GTK2_FIND_INCLUDE_DIR(GLADEMMCONFIG libglademmconfig.h)
+        _GTK2_FIND_LIBRARY    (GLADEMM glademm true true)
+        _GTK2_ADD_TARGET      (GLADEMM GTK2_DEPENDS gtkmm glade atkmm gdkmm giomm pangomm glibmm sigc++ gtk gdk atk pangoft2 gdk_pixbuf pango gthread gobject glib
+                                       GTK2_OPTIONAL_DEPENDS giomm cairomm gio pangocairo cairo
+                                       OPTIONAL_INCLUDES ${FREETYPE_INCLUDE_DIR_ft2build} ${FREETYPE_INCLUDE_DIR_freetype2}
+                                                         ${GTK2_FONTCONFIG_INCLUDE_DIR}
+                                                         ${GTK2_X11_INCLUDE_DIR})
+
+    else()
+        message(FATAL_ERROR "Unknown GTK2 component ${_component}")
+    endif()
+endforeach()
+
+#
+# Solve for the GTK2 version if we haven't already
+#
+if(NOT GTK2_FIND_VERSION AND GTK2_GTK_INCLUDE_DIR)
+    _GTK2_GET_VERSION(GTK2_MAJOR_VERSION
+                      GTK2_MINOR_VERSION
+                      GTK2_PATCH_VERSION
+                      ${GTK2_GTK_INCLUDE_DIR}/gtk/gtkversion.h)
+    set(GTK2_VERSION ${GTK2_MAJOR_VERSION}.${GTK2_MINOR_VERSION}.${GTK2_PATCH_VERSION})
+endif()
+
+#
+# Try to enforce components
+#
+
+set(_GTK2_did_we_find_everything true)  # This gets set to GTK2_FOUND
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+foreach(_GTK2_component ${GTK2_FIND_COMPONENTS})
+    string(TOUPPER ${_GTK2_component} _COMPONENT_UPPER)
+
+    set(GTK2_${_COMPONENT_UPPER}_FIND_QUIETLY ${GTK2_FIND_QUIETLY})
+
+    if(_GTK2_component STREQUAL "gtk")
+        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "Some or all of the gtk libraries were not found."
+            GTK2_GTK_LIBRARY
+            GTK2_GTK_INCLUDE_DIR
+
+            GTK2_GDK_INCLUDE_DIR
+            GTK2_GDKCONFIG_INCLUDE_DIR
+            GTK2_GDK_LIBRARY
+
+            GTK2_GLIB_INCLUDE_DIR
+            GTK2_GLIBCONFIG_INCLUDE_DIR
+            GTK2_GLIB_LIBRARY
+        )
+    elseif(_GTK2_component STREQUAL "gtkmm")
+        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "Some or all of the gtkmm libraries were not found."
+            GTK2_GTKMM_LIBRARY
+            GTK2_GTKMM_INCLUDE_DIR
+            GTK2_GTKMMCONFIG_INCLUDE_DIR
+
+            GTK2_GDKMM_INCLUDE_DIR
+            GTK2_GDKMMCONFIG_INCLUDE_DIR
+            GTK2_GDKMM_LIBRARY
+
+            GTK2_GLIBMM_INCLUDE_DIR
+            GTK2_GLIBMMCONFIG_INCLUDE_DIR
+            GTK2_GLIBMM_LIBRARY
+
+            FREETYPE_INCLUDE_DIR_ft2build
+            FREETYPE_INCLUDE_DIR_freetype2
+        )
+    elseif(_GTK2_component STREQUAL "glade")
+        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "The glade library was not found."
+            GTK2_GLADE_LIBRARY
+            GTK2_GLADE_INCLUDE_DIR
+        )
+    elseif(_GTK2_component STREQUAL "glademm")
+        FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK2_${_COMPONENT_UPPER} "The glademm library was not found."
+            GTK2_GLADEMM_LIBRARY
+            GTK2_GLADEMM_INCLUDE_DIR
+            GTK2_GLADEMMCONFIG_INCLUDE_DIR
+        )
+    endif()
+
+    if(NOT GTK2_${_COMPONENT_UPPER}_FOUND)
+        set(_GTK2_did_we_find_everything false)
+    endif()
+endforeach()
+
+if(GTK2_USE_IMPORTED_TARGETS)
+    set(GTK2_LIBRARIES ${GTK2_TARGETS})
+endif()
+
+
+if(_GTK2_did_we_find_everything AND NOT GTK2_VERSION_CHECK_FAILED)
+    set(GTK2_FOUND true)
+else()
+    # Unset our variables.
+    set(GTK2_FOUND false)
+    set(GTK2_VERSION)
+    set(GTK2_VERSION_MAJOR)
+    set(GTK2_VERSION_MINOR)
+    set(GTK2_VERSION_PATCH)
+    set(GTK2_INCLUDE_DIRS)
+    set(GTK2_LIBRARIES)
+    set(GTK2_TARGETS)
+    set(GTK2_DEFINITIONS)
+endif()
+
+if(GTK2_INCLUDE_DIRS)
+   list(REMOVE_DUPLICATES GTK2_INCLUDE_DIRS)
+endif()
+
diff --git a/share/cmake-3.6/Modules/FindGTest.cmake b/share/cmake-3.6/Modules/FindGTest.cmake
new file mode 100644
index 0000000..a7ffcfe
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindGTest.cmake
@@ -0,0 +1,268 @@
+#.rst:
+# FindGTest
+# ---------
+#
+# Locate the Google C++ Testing Framework.
+#
+# Imported targets
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines the following :prop_tgt:`IMPORTED` targets:
+#
+# ``GTest::GTest``
+#   The Google Test ``gtest`` library, if found; adds Thread::Thread
+#   automatically
+# ``GTest::Main``
+#   The Google Test ``gtest_main`` library, if found
+#
+#
+# Result variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module will set the following variables in your project:
+#
+# ``GTEST_FOUND``
+#   Found the Google Testing framework
+# ``GTEST_INCLUDE_DIRS``
+#   the directory containing the Google Test headers
+#
+# The library variables below are set as normal variables.  These
+# contain debug/optimized keywords when a debugging library is found.
+#
+# ``GTEST_LIBRARIES``
+#   The Google Test ``gtest`` library; note it also requires linking
+#   with an appropriate thread library
+# ``GTEST_MAIN_LIBRARIES``
+#   The Google Test ``gtest_main`` library
+# ``GTEST_BOTH_LIBRARIES``
+#   Both ``gtest`` and ``gtest_main``
+#
+# Cache variables
+# ^^^^^^^^^^^^^^^
+#
+# The following cache variables may also be set:
+#
+# ``GTEST_ROOT``
+#   The root directory of the Google Test installation (may also be
+#   set as an environment variable)
+# ``GTEST_MSVC_SEARCH``
+#   If compiling with MSVC, this variable can be set to ``MD`` or
+#   ``MT`` (the default) to enable searching a GTest build tree
+#
+#
+# Example usage
+# ^^^^^^^^^^^^^
+#
+# ::
+#
+#     enable_testing()
+#     find_package(GTest REQUIRED)
+#
+#     add_executable(foo foo.cc)
+#     target_link_libraries(foo GTest::GTest GTest::Main)
+#
+#     add_test(AllTestsInFoo foo)
+#
+#
+# Deeper integration with CTest
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# If you would like each Google test to show up in CTest as a test you
+# may use the following macro::
+#
+#     GTEST_ADD_TESTS(executable extra_args files...)
+#
+# ``executable``
+#   the path to the test executable
+# ``extra_args``
+#   a list of extra arguments to be passed to executable enclosed in
+#   quotes (or ``""`` for none)
+# ``files...``
+#   a list of source files to search for tests and test fixtures.  Or
+#   ``AUTO`` to find them from executable target
+#
+# However, note that this macro will slow down your tests by running
+# an executable for each test and test fixture.
+#
+# Example usage::
+#
+#      set(FooTestArgs --foo 1 --bar 2)
+#      add_executable(FooTest FooUnitTest.cc)
+#      GTEST_ADD_TESTS(FooTest "${FooTestArgs}" AUTO)
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+# Copyright 2009 Philip Lowman <philip@yhbt.com>
+# Copyright 2009 Daniel Blezek <blezek@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+#
+# Thanks to Daniel Blezek <blezek@gmail.com> for the GTEST_ADD_TESTS code
+
+function(GTEST_ADD_TESTS executable extra_args)
+    if(NOT ARGN)
+        message(FATAL_ERROR "Missing ARGN: Read the documentation for GTEST_ADD_TESTS")
+    endif()
+    if(ARGN STREQUAL "AUTO")
+        # obtain sources used for building that executable
+        get_property(ARGN TARGET ${executable} PROPERTY SOURCES)
+    endif()
+    set(gtest_case_name_regex ".*\\( *([A-Za-z_0-9]+) *, *([A-Za-z_0-9]+) *\\).*")
+    set(gtest_test_type_regex "(TYPED_TEST|TEST_?[FP]?)")
+    foreach(source ${ARGN})
+        set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS ${source})
+        file(READ "${source}" contents)
+        string(REGEX MATCHALL "${gtest_test_type_regex} *\\(([A-Za-z_0-9 ,]+)\\)" found_tests ${contents})
+        foreach(hit ${found_tests})
+          string(REGEX MATCH "${gtest_test_type_regex}" test_type ${hit})
+
+          # Parameterized tests have a different signature for the filter
+          if("x${test_type}" STREQUAL "xTEST_P")
+            string(REGEX REPLACE ${gtest_case_name_regex}  "*/\\1.\\2/*" test_name ${hit})
+          elseif("x${test_type}" STREQUAL "xTEST_F" OR "x${test_type}" STREQUAL "xTEST")
+            string(REGEX REPLACE ${gtest_case_name_regex} "\\1.\\2" test_name ${hit})
+          elseif("x${test_type}" STREQUAL "xTYPED_TEST")
+            string(REGEX REPLACE ${gtest_case_name_regex} "\\1/*.\\2" test_name ${hit})
+          else()
+            message(WARNING "Could not parse GTest ${hit} for adding to CTest.")
+            continue()
+          endif()
+          add_test(NAME ${test_name} COMMAND ${executable} --gtest_filter=${test_name} ${extra_args})
+        endforeach()
+    endforeach()
+endfunction()
+
+function(_gtest_append_debugs _endvar _library)
+    if(${_library} AND ${_library}_DEBUG)
+        set(_output optimized ${${_library}} debug ${${_library}_DEBUG})
+    else()
+        set(_output ${${_library}})
+    endif()
+    set(${_endvar} ${_output} PARENT_SCOPE)
+endfunction()
+
+function(_gtest_find_library _name)
+    find_library(${_name}
+        NAMES ${ARGN}
+        HINTS
+            ENV GTEST_ROOT
+            ${GTEST_ROOT}
+        PATH_SUFFIXES ${_gtest_libpath_suffixes}
+    )
+    mark_as_advanced(${_name})
+endfunction()
+
+#
+
+if(NOT DEFINED GTEST_MSVC_SEARCH)
+    set(GTEST_MSVC_SEARCH MD)
+endif()
+
+set(_gtest_libpath_suffixes lib)
+if(MSVC)
+    if(GTEST_MSVC_SEARCH STREQUAL "MD")
+        list(APPEND _gtest_libpath_suffixes
+            msvc/gtest-md/Debug
+            msvc/gtest-md/Release)
+    elseif(GTEST_MSVC_SEARCH STREQUAL "MT")
+        list(APPEND _gtest_libpath_suffixes
+            msvc/gtest/Debug
+            msvc/gtest/Release)
+    endif()
+endif()
+
+
+find_path(GTEST_INCLUDE_DIR gtest/gtest.h
+    HINTS
+        $ENV{GTEST_ROOT}/include
+        ${GTEST_ROOT}/include
+)
+mark_as_advanced(GTEST_INCLUDE_DIR)
+
+if(MSVC AND GTEST_MSVC_SEARCH STREQUAL "MD")
+    # The provided /MD project files for Google Test add -md suffixes to the
+    # library names.
+    _gtest_find_library(GTEST_LIBRARY            gtest-md  gtest)
+    _gtest_find_library(GTEST_LIBRARY_DEBUG      gtest-mdd gtestd)
+    _gtest_find_library(GTEST_MAIN_LIBRARY       gtest_main-md  gtest_main)
+    _gtest_find_library(GTEST_MAIN_LIBRARY_DEBUG gtest_main-mdd gtest_maind)
+else()
+    _gtest_find_library(GTEST_LIBRARY            gtest)
+    _gtest_find_library(GTEST_LIBRARY_DEBUG      gtestd)
+    _gtest_find_library(GTEST_MAIN_LIBRARY       gtest_main)
+    _gtest_find_library(GTEST_MAIN_LIBRARY_DEBUG gtest_maind)
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTest DEFAULT_MSG GTEST_LIBRARY GTEST_INCLUDE_DIR GTEST_MAIN_LIBRARY)
+
+if(GTEST_FOUND)
+    set(GTEST_INCLUDE_DIRS ${GTEST_INCLUDE_DIR})
+    _gtest_append_debugs(GTEST_LIBRARIES      GTEST_LIBRARY)
+    _gtest_append_debugs(GTEST_MAIN_LIBRARIES GTEST_MAIN_LIBRARY)
+    set(GTEST_BOTH_LIBRARIES ${GTEST_LIBRARIES} ${GTEST_MAIN_LIBRARIES})
+
+    include(CMakeFindDependencyMacro)
+    find_dependency(Threads)
+
+    if(NOT TARGET GTest::GTest)
+        add_library(GTest::GTest UNKNOWN IMPORTED)
+        set_target_properties(GTest::GTest PROPERTIES
+            INTERFACE_LINK_LIBRARIES "Threads::Threads")
+        if(GTEST_INCLUDE_DIRS)
+            set_target_properties(GTest::GTest PROPERTIES
+                INTERFACE_INCLUDE_DIRECTORIES "${GTEST_INCLUDE_DIRS}")
+        endif()
+        if(EXISTS "${GTEST_LIBRARY}")
+            set_target_properties(GTest::GTest PROPERTIES
+                IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
+                IMPORTED_LOCATION "${GTEST_LIBRARY}")
+        endif()
+        if(EXISTS "${GTEST_LIBRARY_DEBUG}")
+            set_property(TARGET GTest::GTest APPEND PROPERTY
+                IMPORTED_CONFIGURATIONS DEBUG)
+            set_target_properties(GTest::GTest PROPERTIES
+                IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "CXX"
+                IMPORTED_LOCATION_DEBUG "${GTEST_LIBRARY_DEBUG}")
+        endif()
+        if(EXISTS "${GTEST_LIBRARY_RELEASE}")
+            set_property(TARGET GTest::GTest APPEND PROPERTY
+                IMPORTED_CONFIGURATIONS RELEASE)
+            set_target_properties(GTest::GTest PROPERTIES
+                IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "CXX"
+                IMPORTED_LOCATION_RELEASE "${GTEST_LIBRARY_RELEASE}")
+        endif()
+      endif()
+      if(NOT TARGET GTest::Main)
+          add_library(GTest::Main UNKNOWN IMPORTED)
+          set_target_properties(GTest::Main PROPERTIES
+              INTERFACE_LINK_LIBRARIES "GTest::GTest")
+          if(EXISTS "${GTEST_MAIN_LIBRARY}")
+              set_target_properties(GTest::Main PROPERTIES
+                  IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
+                  IMPORTED_LOCATION "${GTEST_MAIN_LIBRARY}")
+          endif()
+          if(EXISTS "${GTEST_MAIN_LIBRARY_DEBUG}")
+            set_property(TARGET GTest::Main APPEND PROPERTY
+                IMPORTED_CONFIGURATIONS DEBUG)
+            set_target_properties(GTest::Main PROPERTIES
+                IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "CXX"
+                IMPORTED_LOCATION_DEBUG "${GTEST_MAIN_LIBRARY_DEBUG}")
+          endif()
+          if(EXISTS "${GTEST_MAIN_LIBRARY_RELEASE}")
+            set_property(TARGET GTest::Main APPEND PROPERTY
+                IMPORTED_CONFIGURATIONS RELEASE)
+            set_target_properties(GTest::Main PROPERTIES
+                IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "CXX"
+                IMPORTED_LOCATION_RELEASE "${GTEST_MAIN_LIBRARY_RELEASE}")
+          endif()
+    endif()
+endif()
diff --git a/share/cmake-3.2/Modules/FindGettext.cmake b/share/cmake-3.6/Modules/FindGettext.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGettext.cmake
rename to share/cmake-3.6/Modules/FindGettext.cmake
diff --git a/share/cmake-3.6/Modules/FindGit.cmake b/share/cmake-3.6/Modules/FindGit.cmake
new file mode 100644
index 0000000..95188ce
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindGit.cmake
@@ -0,0 +1,85 @@
+#.rst:
+# FindGit
+# -------
+#
+# The module defines the following variables:
+#
+# ``GIT_EXECUTABLE``
+#   Path to Git command-line client.
+# ``Git_FOUND``, ``GIT_FOUND``
+#   True if the Git command-line client was found.
+# ``GIT_VERSION_STRING``
+#   The version of Git found.
+#
+# Example usage:
+#
+# .. code-block:: cmake
+#
+#    find_package(Git)
+#    if(Git_FOUND)
+#      message("Git found: ${GIT_EXECUTABLE}")
+#    endif()
+
+#=============================================================================
+# Copyright 2010-2016 Kitware, Inc.
+# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Look for 'git' or 'eg' (easy git)
+#
+set(git_names git eg)
+
+# Prefer .cmd variants on Windows unless running in a Makefile
+# in the MSYS shell.
+#
+if(WIN32)
+  if(NOT CMAKE_GENERATOR MATCHES "MSYS")
+    set(git_names git.cmd git eg.cmd eg)
+    # GitHub search path for Windows
+    file(GLOB github_path
+      "$ENV{LOCALAPPDATA}/Github/PortableGit*/cmd"
+      "$ENV{LOCALAPPDATA}/Github/PortableGit*/bin"
+      )
+    # SourceTree search path for Windows
+    set(_git_sourcetree_path "$ENV{LOCALAPPDATA}/Atlassian/SourceTree/git_local/bin")
+  endif()
+endif()
+
+find_program(GIT_EXECUTABLE
+  NAMES ${git_names}
+  PATHS ${github_path} ${_git_sourcetree_path}
+  PATH_SUFFIXES Git/cmd Git/bin
+  DOC "Git command line client"
+  )
+mark_as_advanced(GIT_EXECUTABLE)
+
+unset(git_names)
+unset(_git_sourcetree_path)
+
+if(GIT_EXECUTABLE)
+  execute_process(COMMAND ${GIT_EXECUTABLE} --version
+                  OUTPUT_VARIABLE git_version
+                  ERROR_QUIET
+                  OUTPUT_STRIP_TRAILING_WHITESPACE)
+  if (git_version MATCHES "^git version [0-9]")
+    string(REPLACE "git version " "" GIT_VERSION_STRING "${git_version}")
+  endif()
+  unset(git_version)
+endif()
+
+# Handle the QUIETLY and REQUIRED arguments and set Git_FOUND to TRUE if
+# all listed variables are TRUE
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(Git
+                                  REQUIRED_VARS GIT_EXECUTABLE
+                                  VERSION_VAR GIT_VERSION_STRING)
diff --git a/share/cmake-3.2/Modules/FindGnuTLS.cmake b/share/cmake-3.6/Modules/FindGnuTLS.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGnuTLS.cmake
rename to share/cmake-3.6/Modules/FindGnuTLS.cmake
diff --git a/share/cmake-3.2/Modules/FindGnuplot.cmake b/share/cmake-3.6/Modules/FindGnuplot.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindGnuplot.cmake
rename to share/cmake-3.6/Modules/FindGnuplot.cmake
diff --git a/share/cmake-3.6/Modules/FindHDF5.cmake b/share/cmake-3.6/Modules/FindHDF5.cmake
new file mode 100644
index 0000000..bc0d50b
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindHDF5.cmake
@@ -0,0 +1,693 @@
+#.rst:
+# FindHDF5
+# --------
+#
+# Find HDF5, a library for reading and writing self describing array data.
+#
+#
+#
+# This module invokes the HDF5 wrapper compiler that should be installed
+# alongside HDF5.  Depending upon the HDF5 Configuration, the wrapper
+# compiler is called either h5cc or h5pcc.  If this succeeds, the module
+# will then call the compiler with the -show argument to see what flags
+# are used when compiling an HDF5 client application.
+#
+# The module will optionally accept the COMPONENTS argument.  If no
+# COMPONENTS are specified, then the find module will default to finding
+# only the HDF5 C library.  If one or more COMPONENTS are specified, the
+# module will attempt to find the language bindings for the specified
+# components.  The only valid components are C, CXX, Fortran, HL, and
+# Fortran_HL.  If the COMPONENTS argument is not given, the module will
+# attempt to find only the C bindings.
+#
+# On UNIX systems, this module will read the variable
+# HDF5_USE_STATIC_LIBRARIES to determine whether or not to prefer a
+# static link to a dynamic link for HDF5 and all of it's dependencies.
+# To use this feature, make sure that the HDF5_USE_STATIC_LIBRARIES
+# variable is set before the call to find_package.
+#
+# To provide the module with a hint about where to find your HDF5
+# installation, you can set the environment variable HDF5_ROOT.  The
+# Find module will then look in this path when searching for HDF5
+# executables, paths, and libraries.
+#
+# Both the serial and parallel HDF5 wrappers are considered and the first
+# directory to contain either one will be used.  In the event that both appear
+# in the same directory the serial version is preferentially selected. This
+# behavior can be reversed by setting the variable HDF5_PREFER_PARALLEL to
+# true.
+#
+# In addition to finding the includes and libraries required to compile
+# an HDF5 client application, this module also makes an effort to find
+# tools that come with the HDF5 distribution that may be useful for
+# regression testing.
+#
+# This module will define the following variables:
+#
+# ::
+#
+#   HDF5_FOUND - true if HDF5 was found on the system
+#   HDF5_VERSION - HDF5 version in format Major.Minor.Release
+#   HDF5_INCLUDE_DIRS - Location of the hdf5 includes
+#   HDF5_INCLUDE_DIR - Location of the hdf5 includes (deprecated)
+#   HDF5_DEFINITIONS - Required compiler definitions for HDF5
+#   HDF5_LIBRARIES - Required libraries for all requested bindings
+#   HDF5_HL_LIBRARIES - Required libraries for the HDF5 high level API for all
+#                       bindings, if the HL component is enabled
+#
+# Available components are: C CXX Fortran and HL.  For each enabled language
+# binding, a corresponding HDF5_${LANG}_LIBRARIES variable will be defined.
+# If the HL component is enabled, then an HDF5_${LANG}_HL_LIBRARIES will
+# also be defined.  With all components enabled, the following variables will be defined:
+#
+# ::
+#
+#   HDF5_C_LIBRARIES - Required libraries for the HDF5 C bindings
+#   HDF5_CXX_LIBRARIES - Required libraries for the HDF5 C++ bindings
+#   HDF5_Fortran_LIBRARIES - Required libraries for the HDF5 Fortran bindings
+#   HDF5_C_HL_LIBRARIES - Required libraries for the high level C bindings
+#   HDF5_CXX_HL_LIBRARIES - Required libraries for the high level C++ bindings
+#   HDF5_Fortran_HL_LIBRARIES - Required libraries for the high level Fortran
+#                               bindings.
+#
+#   HDF5_IS_PARALLEL - Whether or not HDF5 was found with parallel IO support
+#   HDF5_C_COMPILER_EXECUTABLE - the path to the HDF5 C wrapper compiler
+#   HDF5_CXX_COMPILER_EXECUTABLE - the path to the HDF5 C++ wrapper compiler
+#   HDF5_Fortran_COMPILER_EXECUTABLE - the path to the HDF5 Fortran wrapper compiler
+#   HDF5_C_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary C compiler
+#                                               which is also the HDF5 wrapper
+#   HDF5_CXX_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary C++
+#                                                 compiler which is also
+#                                                 the HDF5 wrapper
+#   HDF5_Fortran_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary
+#                                                     Fortran compiler which
+#                                                     is also the HDF5 wrapper
+#   HDF5_DIFF_EXECUTABLE - the path to the HDF5 dataset comparison tool
+#
+# The following variable can be set to guide the search for HDF5 libraries and includes:
+#
+# HDF5_ROOT
+
+#=============================================================================
+# Copyright 2015 Axel Huebl, Helmholtz-Zentrum Dresden - Rossendorf
+# Copyright 2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is maintained by Will Dicharry <wdicharry@stellarscience.com>.
+
+include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+# List of the valid HDF5 components
+set(HDF5_VALID_LANGUAGE_BINDINGS C CXX Fortran)
+
+# Validate the list of find components.
+set(HDF5_LANGUAGE_BINDINGS)
+if(NOT HDF5_FIND_COMPONENTS)
+  get_property(__langs GLOBAL PROPERTY ENABLED_LANGUAGES)
+  foreach(__lang IN LISTS __langs)
+    if(__lang MATCHES "^(C|CXX|Fortran)$")
+      list(APPEND HDF5_LANGUAGE_BINDINGS ${__lang})
+    endif()
+  endforeach()
+  set(FIND_HL ON)
+else()
+  # add the extra specified components, ensuring that they are valid.
+  set(FIND_HL OFF)
+  foreach(component IN LISTS HDF5_FIND_COMPONENTS)
+    list(FIND HDF5_VALID_LANGUAGE_BINDINGS ${component} component_location)
+    if(NOT component_location EQUAL -1)
+      list(APPEND HDF5_LANGUAGE_BINDINGS ${component})
+    elseif(component STREQUAL "HL")
+      set(FIND_HL ON)
+    elseif(component STREQUAL "Fortran_HL") # only for compatibility
+      list(APPEND HDF5_LANGUAGE_BINDINGS Fortran)
+      set(FIND_HL ON)
+    else()
+      message(FATAL_ERROR "${component} is not a valid HDF5 component.")
+    endif()
+  endforeach()
+  if(NOT HDF5_LANGUAGE_BINDINGS)
+    get_property(__langs GLOBAL PROPERTY ENABLED_LANGUAGES)
+    foreach(__lang IN LISTS __langs)
+      if(__lang MATCHES "^(C|CXX|Fortran)$")
+        list(APPEND HDF5_LANGUAGE_BINDINGS ${__lang})
+      endif()
+    endforeach()
+  endif()
+  list(REMOVE_DUPLICATES HDF5_LANGUAGE_BINDINGS)
+endif()
+
+# Determine whether to search for serial or parallel executable first
+if(HDF5_PREFER_PARALLEL)
+  set(HDF5_C_COMPILER_NAMES h5pcc h5cc)
+  set(HDF5_CXX_COMPILER_NAMES h5pc++ h5c++)
+  set(HDF5_Fortran_COMPILER_NAMES h5pfc h5fc)
+else()
+  set(HDF5_C_COMPILER_NAMES h5cc h5pcc)
+  set(HDF5_CXX_COMPILER_NAMES h5c++ h5pc++)
+  set(HDF5_Fortran_COMPILER_NAMES h5fc h5pfc)
+endif()
+
+# We may have picked up some duplicates in various lists during the above
+# process for the language bindings (both the C and C++ bindings depend on
+# libz for example).  Remove the duplicates. It appears that the default
+# CMake behavior is to remove duplicates from the end of a list. However,
+# for link lines, this is incorrect since unresolved symbols are searched
+# for down the link line. Therefore, we reverse the list, remove the
+# duplicates, and then reverse it again to get the duplicates removed from
+# the beginning.
+macro(_HDF5_remove_duplicates_from_beginning _list_name)
+  if(${_list_name})
+    list(REVERSE ${_list_name})
+    list(REMOVE_DUPLICATES ${_list_name})
+    list(REVERSE ${_list_name})
+  endif()
+endmacro()
+
+
+# Test first if the current compilers automatically wrap HDF5
+
+function(_HDF5_test_regular_compiler_C success version)
+  set(scratch_directory
+    ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/hdf5)
+  if(NOT ${success} OR
+     NOT EXISTS ${scratch_directory}/compiler_has_h5_c)
+    set(test_file ${scratch_directory}/cmake_hdf5_test.c)
+    file(WRITE ${test_file}
+      "#include <hdf5.h>\n"
+      "#include <hdf5_hl.h>\n"
+      "int main(void) {\n"
+      "  char const* info_ver = \"INFO\" \":\" H5_VERSION;\n"
+      "  hid_t fid;\n"
+      "  fid = H5Fcreate(\"foo.h5\",H5F_ACC_TRUNC,H5P_DEFAULT,H5P_DEFAULT);\n"
+      "  return 0;\n"
+      "}")
+    try_compile(${success} ${scratch_directory} ${test_file}
+      COPY_FILE ${scratch_directory}/compiler_has_h5_c
+    )
+  endif()
+  if(${success})
+    file(STRINGS ${scratch_directory}/compiler_has_h5_c INFO_VER
+      REGEX "^INFO:([0-9]+\\.[0-9]+\\.[0-9]+)(-patch([0-9]+))?"
+    )
+    string(REGEX MATCH "^INFO:([0-9]+\\.[0-9]+\\.[0-9]+)(-patch([0-9]+))?"
+      INFO_VER "${INFO_VER}"
+    )
+    set(${version} ${CMAKE_MATCH_1})
+    if(CMAKE_MATCH_3)
+      set(${version} ${HDF5_CXX_VERSION}.${CMAKE_MATCH_3})
+    endif()
+    set(${version} ${${version}} PARENT_SCOPE)
+  endif()
+endfunction()
+
+function(_HDF5_test_regular_compiler_CXX success version)
+  set(scratch_directory ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/hdf5)
+  if(NOT ${success} OR
+     NOT EXISTS ${scratch_directory}/compiler_has_h5_cxx)
+    set(test_file ${scratch_directory}/cmake_hdf5_test.cxx)
+    file(WRITE ${test_file}
+      "#include <H5Cpp.h>\n"
+      "#ifndef H5_NO_NAMESPACE\n"
+      "using namespace H5;\n"
+      "#endif\n"
+      "int main(int argc, char **argv) {\n"
+      "  char const* info_ver = \"INFO\" \":\" H5_VERSION;\n"
+      "  H5File file(\"foo.h5\", H5F_ACC_TRUNC);\n"
+      "  return 0;\n"
+      "}")
+    try_compile(${success} ${scratch_directory} ${test_file}
+      COPY_FILE ${scratch_directory}/compiler_has_h5_cxx
+    )
+  endif()
+  if(${success})
+    file(STRINGS ${scratch_directory}/compiler_has_h5_cxx INFO_VER
+      REGEX "^INFO:([0-9]+\\.[0-9]+\\.[0-9]+)(-patch([0-9]+))?"
+    )
+    string(REGEX MATCH "^INFO:([0-9]+\\.[0-9]+\\.[0-9]+)(-patch([0-9]+))?"
+      INFO_VER "${INFO_VER}"
+    )
+    set(${version} ${CMAKE_MATCH_1})
+    if(CMAKE_MATCH_3)
+      set(${version} ${HDF5_CXX_VERSION}.${CMAKE_MATCH_3})
+    endif()
+    set(${version} ${${version}} PARENT_SCOPE)
+  endif()
+endfunction()
+
+function(_HDF5_test_regular_compiler_Fortran success)
+  if(NOT ${success})
+    set(scratch_directory
+      ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/hdf5)
+    set(test_file ${scratch_directory}/cmake_hdf5_test.f90)
+    file(WRITE ${test_file}
+      "program hdf5_hello\n"
+      "  use hdf5\n"
+      "  use h5lt\n"
+      "  use h5ds\n"
+      "  integer error\n"
+      "  call h5open_f(error)\n"
+      "  call h5close_f(error)\n"
+      "end\n")
+    try_compile(${success} ${scratch_directory} ${test_file})
+  endif()
+endfunction()
+
+# Invoke the HDF5 wrapper compiler.  The compiler return value is stored to the
+# return_value argument, the text output is stored to the output variable.
+macro( _HDF5_invoke_compiler language output return_value version)
+    set(${version})
+    exec_program( ${HDF5_${language}_COMPILER_EXECUTABLE}
+        ARGS -show
+        OUTPUT_VARIABLE ${output}
+        RETURN_VALUE ${return_value}
+    )
+    if(NOT ${${return_value}} EQUAL 0)
+        message(STATUS
+          "Unable to determine HDF5 ${language} flags from HDF5 wrapper.")
+    endif()
+    exec_program( ${HDF5_${language}_COMPILER_EXECUTABLE}
+        ARGS -showconfig
+        OUTPUT_VARIABLE config_output
+        RETURN_VALUE config_return
+    )
+    if(NOT ${return_value} EQUAL 0)
+        message( STATUS
+          "Unable to determine HDF5 ${language} version from HDF5 wrapper.")
+    endif()
+    string(REGEX MATCH "HDF5 Version: ([a-zA-Z0-9\\.\\-]*)" version_match "${config_output}")
+    if(version_match)
+        string(REPLACE "HDF5 Version: " "" ${version} "${version_match}")
+        string(REPLACE "-patch" "." ${version} "${${version}}")
+    endif()
+endmacro()
+
+# Parse a compile line for definitions, includes, library paths, and libraries.
+macro( _HDF5_parse_compile_line
+    compile_line_var
+    include_paths
+    definitions
+    library_paths
+    libraries
+    libraries_hl)
+
+    # Match the include paths
+    string( REGEX MATCHALL "-I([^\" ]+)" include_path_flags
+        "${${compile_line_var}}"
+    )
+    foreach( IPATH ${include_path_flags} )
+        string( REGEX REPLACE "^-I" "" IPATH ${IPATH} )
+        string( REPLACE "//" "/" IPATH ${IPATH} )
+        list( APPEND ${include_paths} ${IPATH} )
+    endforeach()
+
+    # Match the definitions
+    string( REGEX MATCHALL "-D[^ ]*" definition_flags "${${compile_line_var}}" )
+    foreach( DEF ${definition_flags} )
+        list( APPEND ${definitions} ${DEF} )
+    endforeach()
+
+    # Match the library paths
+    string( REGEX MATCHALL "-L([^\" ]+|\"[^\"]+\")" library_path_flags
+        "${${compile_line_var}}"
+    )
+
+    foreach( LPATH ${library_path_flags} )
+        string( REGEX REPLACE "^-L" "" LPATH ${LPATH} )
+        string( REPLACE "//" "/" LPATH ${LPATH} )
+        list( APPEND ${library_paths} ${LPATH} )
+    endforeach()
+
+    # now search for the library names specified in the compile line (match -l...)
+    # match only -l's preceded by a space or comma
+    # this is to exclude directory names like xxx-linux/
+    string( REGEX MATCHALL "[, ]-l([^\", ]+)" library_name_flags
+        "${${compile_line_var}}" )
+    # strip the -l from all of the library flags and add to the search list
+    foreach( LIB ${library_name_flags} )
+        string( REGEX REPLACE "^[, ]-l" "" LIB ${LIB} )
+        if(LIB MATCHES ".*_hl")
+            list(APPEND ${libraries_hl} ${LIB})
+        else()
+            list(APPEND ${libraries} ${LIB})
+        endif()
+    endforeach()
+endmacro()
+
+# Try to find HDF5 using an installed hdf5-config.cmake
+if(NOT HDF5_FOUND AND NOT HDF5_ROOT)
+    find_package(HDF5 QUIET NO_MODULE)
+    if( HDF5_FOUND)
+        set(HDF5_INCLUDE_DIRS ${HDF5_INCLUDE_DIR})
+        set(HDF5_LIBRARIES)
+        set(HDF5_C_TARGET hdf5)
+        set(HDF5_C_HL_TARGET hdf5_hl)
+        set(HDF5_CXX_TARGET hdf5_cpp)
+        set(HDF5_CXX_HL_TARGET hdf5_hl_cpp)
+        set(HDF5_Fortran_TARGET hdf5_fortran)
+        set(HDF5_Fortran_HL_TARGET hdf5_hl_fortran)
+        if(HDF5_USE_STATIC_LIBRARIES)
+            set(_suffix "-static")
+        else()
+            set(_suffix "-shared")
+        endif()
+        foreach(_lang ${HDF5_LANGUAGE_BINDINGS})
+            get_target_property(_lang_location ${HDF5_${_component}_TARGET}${_suffix} LOCATION)
+            if( _lang_location )
+                set(HDF5_${_lang}_LIBRARY ${_lang_location} CACHE PATH
+                    "HDF5 ${_lang} library" )
+                mark_as_advanced(HDF5_${_lang}_LIBRARY)
+                list(APPEND HDF5_LIBRARIES ${HDF5_${_lang}_LIBRARY})
+            endif()
+            if(FIND_HL)
+                get_target_property(_lang_hl_location ${HDF5_${_lang}_HL_TARGET}${_suffix} LOCATION)
+                if( _lang_location )
+                    set(HDF5_${_lang}_HL_LIBRARY ${_lang_location} CACHE PATH
+                        "HDF5 ${_lang} HL library" )
+                    mark_as_advanced(HDF5_${_lang}_LIBRARY)
+                    list(APPEND HDF5_HL_LIBRARIES ${HDF5_${_lang}_HL_LIBRARY})
+                endif()
+            endif()
+        endforeach()
+    endif()
+endif()
+
+if(NOT HDF5_FOUND AND NOT HDF5_ROOT)
+  set(_HDF5_NEED_TO_SEARCH False)
+  set(HDF5_COMPILER_NO_INTERROGATE True)
+  # Only search for languages we've enabled
+  foreach(__lang IN LISTS HDF5_LANGUAGE_BINDINGS)
+    # First check to see if our regular compiler is one of wrappers
+    if(__lang STREQUAL "C")
+      _HDF5_test_regular_compiler_C(
+        HDF5_${__lang}_COMPILER_NO_INTERROGATE
+        HDF5_${__lang}_VERSION)
+    elseif(__lang STREQUAL "CXX")
+      _HDF5_test_regular_compiler_CXX(
+        HDF5_${__lang}_COMPILER_NO_INTERROGATE
+        HDF5_${__lang}_VERSION)
+    elseif(__lang STREQUAL "Fortran")
+      _HDF5_test_regular_compiler_Fortran(
+        HDF5_${__lang}_COMPILER_NO_INTERROGATE)
+    else()
+      continue()
+    endif()
+    if(HDF5_${__lang}_COMPILER_NO_INTERROGATE)
+      message(STATUS "HDF5: Using hdf5 compiler wrapper for all ${__lang} compiling")
+      set(HDF5_${__lang}_FOUND True)
+      set(HDF5_${__lang}_COMPILER_EXECUTABLE_NO_INTERROGATE
+          "${CMAKE_${__lang}_COMPILER}"
+          CACHE FILEPATH "HDF5 ${__lang} compiler wrapper")
+      set(HDF5_${__lang}_DEFINITIONS)
+      set(HDF5_${__lang}_INCLUDE_DIRS)
+      set(HDF5_${__lang}_LIBRARIES)
+      mark_as_advanced(HDF5_${__lang}_COMPILER_EXECUTABLE_NO_INTERROGATE)
+      mark_as_advanced(HDF5_${__lang}_DEFINITIONS)
+      mark_as_advanced(HDF5_${__lang}_INCLUDE_DIRS)
+      mark_as_advanced(HDF5_${__lang}_LIBRARIES)
+      mark_as_advanced(HDF5_${__lang}_HL_LIBRARIES)
+    else()
+      set(HDF5_COMPILER_NO_INTERROGATE False)
+      # If this language isn't using the wrapper, then try to seed the
+      # search options with the wrapper
+      find_program(HDF5_${__lang}_COMPILER_EXECUTABLE
+        NAMES ${HDF5_${__lang}_COMPILER_NAMES} NAMES_PER_DIR
+        HINTS ENV HDF5_ROOT
+        PATH_SUFFIXES bin Bin
+        DOC "HDF5 ${__lang} Wrapper compiler.  Used only to detect HDF5 compile flags."
+      )
+      mark_as_advanced( HDF5_${__lang}_COMPILER_EXECUTABLE )
+      unset(HDF5_${__lang}_COMPILER_NAMES)
+
+      if(HDF5_${__lang}_COMPILER_EXECUTABLE)
+        _HDF5_invoke_compiler(${__lang} HDF5_${__lang}_COMPILE_LINE
+          HDF5_${__lang}_RETURN_VALUE HDF5_${__lang}_VERSION)
+        if(HDF5_${__lang}_RETURN_VALUE EQUAL 0)
+          message(STATUS "HDF5: Using hdf5 compiler wrapper to determine ${__lang} configuration")
+          _HDF5_parse_compile_line( HDF5_${__lang}_COMPILE_LINE
+            HDF5_${__lang}_INCLUDE_DIRS
+            HDF5_${__lang}_DEFINITIONS
+            HDF5_${__lang}_LIBRARY_DIRS
+            HDF5_${__lang}_LIBRARY_NAMES
+            HDF5_${__lang}_HL_LIBRARY_NAMES
+          )
+          set(HDF5_${__lang}_LIBRARIES)
+          foreach(L IN LISTS HDF5_${__lang}_LIBRARY_NAMES)
+            find_library(HDF5_${__lang}_LIBRARY_${L} ${L} ${HDF5_${__lang}_LIBRARY_DIRS})
+            if(HDF5_${__lang}_LIBRARY_${L})
+              list(APPEND HDF5_${__lang}_LIBRARIES ${HDF5_${__lang}_LIBRARY_${L}})
+            else()
+              list(APPEND HDF5_${__lang}_LIBRARIES ${L})
+            endif()
+          endforeach()
+          if(FIND_HL)
+            set(HDF5_${__lang}_HL_LIBRARIES)
+            foreach(L IN LISTS HDF5_${__lang}_HL_LIBRARY_NAMES)
+              find_library(HDF5_${__lang}_LIBRARY_${L} ${L} ${HDF5_${__lang}_LIBRARY_DIRS})
+              if(HDF5_${__lang}_LIBRARY_${L})
+                list(APPEND HDF5_${__lang}_HL_LIBRARIES ${HDF5_${__lang}_LIBRARY_${L}})
+              else()
+                list(APPEND HDF5_${__lang}_HL_LIBRARIES ${L})
+              endif()
+            endforeach()
+          endif()
+          set(HDF5_${__lang}_FOUND True)
+          mark_as_advanced(HDF5_${__lang}_DEFINITIONS)
+          mark_as_advanced(HDF5_${__lang}_INCLUDE_DIRS)
+          mark_as_advanced(HDF5_${__lang}_LIBRARIES)
+          _HDF5_remove_duplicates_from_beginning(HDF5_${__lang}_DEFINITIONS)
+          _HDF5_remove_duplicates_from_beginning(HDF5_${__lang}_INCLUDE_DIRS)
+          _HDF5_remove_duplicates_from_beginning(HDF5_${__lang}_LIBRARIES)
+          _HDF5_remove_duplicates_from_beginning(HDF5_${__lang}_HL_LIBRARIES)
+        else()
+          set(_HDF5_NEED_TO_SEARCH True)
+        endif()
+      else()
+        set(_HDF5_NEED_TO_SEARCH True)
+      endif()
+    endif()
+    if(HDF5_${__lang}_VERSION)
+      if(NOT HDF5_VERSION)
+        set(HDF5_VERSION ${HDF5_${__lang}_VERSION})
+      elseif(NOT HDF5_VERSION VERSION_EQUAL HDF5_${__lang}_VERSION)
+        message(WARNING "HDF5 Version found for language ${__lang}, ${HDF5_${__lang}_VERSION} is different than previously found version ${HDF5_VERSION}")
+      endif()
+    endif()
+  endforeach()
+else()
+  set(_HDF5_NEED_TO_SEARCH True)
+endif()
+
+if(NOT HDF5_FOUND AND HDF5_COMPILER_NO_INTERROGATE)
+  # No arguments necessary, all languages can use the compiler wrappers
+  set(HDF5_FOUND True)
+  set(HDF5_METHOD "Included by compiler wrappers")
+  set(HDF5_REQUIRED_VARS HDF5_METHOD)
+elseif(NOT HDF5_FOUND AND NOT _HDF5_NEED_TO_SEARCH)
+  # Compiler wrappers aren't being used by the build but were found and used
+  # to determine necessary include and library flags
+  set(HDF5_INCLUDE_DIRS)
+  set(HDF5_LIBRARIES)
+  set(HDF5_HL_LIBRARIES)
+  foreach(__lang IN LISTS HDF5_LANGUAGE_BINDINGS)
+    if(HDF5_${__lang}_FOUND)
+      if(NOT HDF5_${__lang}_COMPILER_NO_INTERROGATE)
+        list(APPEND HDF5_DEFINITIONS ${HDF5_${__lang}_DEFINITIONS})
+        list(APPEND HDF5_INCLUDE_DIRS ${HDF5_${__lang}_INCLUDE_DIRS})
+        list(APPEND HDF5_LIBRARIES ${HDF5_${__lang}_LIBRARIES})
+        if(FIND_HL)
+          list(APPEND HDF5_HL_LIBRARIES ${HDF5_${__lang}_HL_LIBRARIES})
+        endif()
+      endif()
+    endif()
+  endforeach()
+  _HDF5_remove_duplicates_from_beginning(HDF5_DEFINITIONS)
+  _HDF5_remove_duplicates_from_beginning(HDF5_INCLUDE_DIRS)
+  _HDF5_remove_duplicates_from_beginning(HDF5_LIBRARIES)
+  _HDF5_remove_duplicates_from_beginning(HDF5_HL_LIBRARIES)
+  set(HDF5_FOUND True)
+  set(HDF5_REQUIRED_VARS HDF5_LIBRARIES)
+  if(FIND_HL)
+    list(APPEND HDF5_REQUIRED_VARS HDF5_HL_LIBRARIES)
+  endif()
+endif()
+
+find_program( HDF5_DIFF_EXECUTABLE
+    NAMES h5diff
+    HINTS ENV HDF5_ROOT
+    PATH_SUFFIXES bin Bin
+    DOC "HDF5 file differencing tool." )
+mark_as_advanced( HDF5_DIFF_EXECUTABLE )
+
+if( NOT HDF5_FOUND )
+    # seed the initial lists of libraries to find with items we know we need
+    set(HDF5_C_LIBRARY_NAMES          hdf5)
+    set(HDF5_C_HL_LIBRARY_NAMES       hdf5_hl)
+
+    set(HDF5_CXX_LIBRARY_NAMES        hdf5_cpp    ${HDF5_C_LIBRARY_NAMES})
+    set(HDF5_CXX_HL_LIBRARY_NAMES     hdf5_hl_cpp ${HDF5_C_HL_LIBRARY_NAMES} ${HDF5_CXX_LIBRARY_NAMES})
+
+    set(HDF5_Fortran_LIBRARY_NAMES    hdf5_fortran   ${HDF5_C_LIBRARY_NAMES})
+    set(HDF5_Fortran_HL_LIBRARY_NAMES hdf5_hl_fortran ${HDF5_C_HL_LIBRARY_NAMES} ${HDF5_Fortran_LIBRARY_NAMES})
+
+    if(HDF5_ROOT)
+        set(SEARCH_OPTS NO_DEFAULT_PATH)
+    endif()
+    foreach(__lang IN LISTS HDF5_LANGUAGE_BINDINGS)
+        # find the HDF5 include directories
+        if(LANGUAGE STREQUAL "Fortran")
+            set(HDF5_INCLUDE_FILENAME hdf5.mod)
+        elseif(LANGUAGE STREQUAL "CXX")
+            set(HDF5_INCLUDE_FILENAME H5Cpp.h)
+        else()
+            set(HDF5_INCLUDE_FILENAME hdf5.h)
+        endif()
+
+        find_path(HDF5_${__lang}_INCLUDE_DIR ${HDF5_INCLUDE_FILENAME}
+            HINTS ${HDF5_ROOT} ENV HDF5_ROOT
+            PATHS $ENV{HOME}/.local/include
+            PATH_SUFFIXES include Include
+            ${SEARCH_OPTS}
+        )
+        mark_as_advanced(HDF5_${LANGUAGE}_INCLUDE_DIR)
+        list(APPEND HDF5_INCLUDE_DIRS ${HDF5_${__lang}_INCLUDE_DIR})
+
+        # find the HDF5 libraries
+        foreach(LIB IN LISTS HDF5_${__lang}_LIBRARY_NAMES)
+            if(UNIX AND HDF5_USE_STATIC_LIBRARIES)
+                # According to bug 1643 on the CMake bug tracker, this is the
+                # preferred method for searching for a static library.
+                # See https://cmake.org/Bug/view.php?id=1643.  We search
+                # first for the full static library name, but fall back to a
+                # generic search on the name if the static search fails.
+                set( THIS_LIBRARY_SEARCH_DEBUG
+                    lib${LIB}d.a lib${LIB}_debug.a ${LIB}d ${LIB}_debug
+                    lib${LIB}d-static.a lib${LIB}_debug-static.a ${LIB}d-static ${LIB}_debug-static )
+                set( THIS_LIBRARY_SEARCH_RELEASE lib${LIB}.a ${LIB} lib${LIB}-static.a ${LIB}-static)
+            else()
+                set( THIS_LIBRARY_SEARCH_DEBUG ${LIB}d ${LIB}_debug ${LIB}d-shared ${LIB}_debug-shared)
+                set( THIS_LIBRARY_SEARCH_RELEASE ${LIB} ${LIB}-shared)
+            endif()
+            find_library(HDF5_${LIB}_LIBRARY_DEBUG
+                NAMES ${THIS_LIBRARY_SEARCH_DEBUG}
+                HINTS ${HDF5_ROOT} ENV HDF5_ROOT PATH_SUFFIXES lib Lib
+                ${SEARCH_OPTS}
+            )
+            find_library( HDF5_${LIB}_LIBRARY_RELEASE
+                NAMES ${THIS_LIBRARY_SEARCH_RELEASE}
+                HINTS ${HDF5_ROOT} ENV HDF5_ROOT PATH_SUFFIXES lib Lib
+                ${SEARCH_OPTS}
+            )
+            select_library_configurations( HDF5_${LIB} )
+            list(APPEND HDF5_${__lang}_LIBRARIES ${HDF5_${LIB}_LIBRARY})
+        eNdforeach()
+
+        # Append the libraries for this language binding to the list of all
+        # required libraries.
+        list(APPEND HDF5_LIBRARIES ${HDF5_${__lang}_LIBRARIES})
+
+        if(FIND_HL)
+            foreach(LIB IN LISTS HDF5_${__lang}_HL_LIBRARY_NAMES)
+                if(UNIX AND HDF5_USE_STATIC_LIBRARIES)
+                    # According to bug 1643 on the CMake bug tracker, this is the
+                    # preferred method for searching for a static library.
+                    # See https://cmake.org/Bug/view.php?id=1643.  We search
+                    # first for the full static library name, but fall back to a
+                    # generic search on the name if the static search fails.
+                    set( THIS_LIBRARY_SEARCH_DEBUG
+                        lib${LIB}d.a lib${LIB}_debug.a ${LIB}d ${LIB}_debug
+                        lib${LIB}d-static.a lib${LIB}_debug-static.a ${LIB}d-static ${LIB}_debug-static )
+                    set( THIS_LIBRARY_SEARCH_RELEASE lib${LIB}.a ${LIB} lib${LIB}-static.a ${LIB}-static)
+                else()
+                    set( THIS_LIBRARY_SEARCH_DEBUG ${LIB}d ${LIB}_debug ${LIB}d-shared ${LIB}_debug-shared)
+                    set( THIS_LIBRARY_SEARCH_RELEASE ${LIB} ${LIB}-shared)
+                endif()
+                find_library(HDF5_${LIB}_LIBRARY_DEBUG
+                    NAMES ${THIS_LIBRARY_SEARCH_DEBUG}
+                    HINTS ${HDF5_ROOT} ENV HDF5_ROOT PATH_SUFFIXES lib Lib
+                    ${SEARCH_OPTS}
+                )
+                find_library( HDF5_${LIB}_LIBRARY_RELEASE
+                    NAMES ${THIS_LIBRARY_SEARCH_RELEASE}
+                    HINTS ${HDF5_ROOT} ENV HDF5_ROOT PATH_SUFFIXES lib Lib
+                    ${SEARCH_OPTS}
+                )
+                select_library_configurations( HDF5_${LIB} )
+                list(APPEND HDF5_${__lang}_HL_LIBRARIES ${HDF5_${LIB}_LIBRARY})
+            endforeach()
+
+            # Append the libraries for this language binding to the list of all
+            # required libraries.
+            list(APPEND HDF5_HL_LIBRARIES ${HDF5_${__lang}_HL_LIBRARIES})
+        endif()
+    endforeach()
+
+    _HDF5_remove_duplicates_from_beginning(HDF5_INCLUDE_DIRS)
+    _HDF5_remove_duplicates_from_beginning(HDF5_LIBRARIES)
+    _HDF5_remove_duplicates_from_beginning(HDF5_HL_LIBRARIES)
+
+    # If the HDF5 include directory was found, open H5pubconf.h to determine if
+    # HDF5 was compiled with parallel IO support
+    set( HDF5_IS_PARALLEL FALSE )
+    set( HDF5_VERSION "" )
+    foreach( _dir IN LISTS HDF5_INCLUDE_DIRS )
+      foreach(_hdr "${_dir}/H5pubconf.h" "${_dir}/H5pubconf-64.h" "${_dir}/H5pubconf-32.h")
+        if( EXISTS "${_hdr}" )
+            file( STRINGS "${_hdr}"
+                HDF5_HAVE_PARALLEL_DEFINE
+                REGEX "HAVE_PARALLEL 1" )
+            if( HDF5_HAVE_PARALLEL_DEFINE )
+                set( HDF5_IS_PARALLEL TRUE )
+            endif()
+            unset(HDF5_HAVE_PARALLEL_DEFINE)
+
+            file( STRINGS "${_hdr}"
+                HDF5_VERSION_DEFINE
+                REGEX "^[ \t]*#[ \t]*define[ \t]+H5_VERSION[ \t]+" )
+            if( "${HDF5_VERSION_DEFINE}" MATCHES
+                "H5_VERSION[ \t]+\"([0-9]+\\.[0-9]+\\.[0-9]+)(-patch([0-9]+))?\"" )
+                set( HDF5_VERSION "${CMAKE_MATCH_1}" )
+                if( CMAKE_MATCH_3 )
+                  set( HDF5_VERSION ${HDF5_VERSION}.${CMAKE_MATCH_3})
+                endif()
+            endif()
+            unset(HDF5_VERSION_DEFINE)
+        endif()
+      endforeach()
+    endforeach()
+    set( HDF5_IS_PARALLEL ${HDF5_IS_PARALLEL} CACHE BOOL
+        "HDF5 library compiled with parallel IO support" )
+    mark_as_advanced( HDF5_IS_PARALLEL )
+
+    # For backwards compatibility we set HDF5_INCLUDE_DIR to the value of
+    # HDF5_INCLUDE_DIRS
+    if( HDF5_INCLUDE_DIRS )
+        set( HDF5_INCLUDE_DIR "${HDF5_INCLUDE_DIRS}" )
+    endif()
+    set(HDF5_REQUIRED_VARS HDF5_LIBRARIES HDF5_INCLUDE_DIRS)
+    if(FIND_HL)
+        list(APPEND HDF5_REQUIRED_VARS HDF5_HL_LIBRARIES)
+    endif()
+endif()
+
+# If HDF5_REQUIRED_VARS is empty at this point, then it's likely that
+# something external is trying to explicitly pass already found
+# locations
+if(NOT HDF5_REQUIRED_VARS)
+    set(HDF5_REQUIRED_VARS HDF5_LIBRARIES HDF5_INCLUDE_DIRS)
+endif()
+
+find_package_handle_standard_args(HDF5
+    REQUIRED_VARS ${HDF5_REQUIRED_VARS}
+    VERSION_VAR   HDF5_VERSION
+)
diff --git a/share/cmake-3.2/Modules/FindHSPELL.cmake b/share/cmake-3.6/Modules/FindHSPELL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindHSPELL.cmake
rename to share/cmake-3.6/Modules/FindHSPELL.cmake
diff --git a/share/cmake-3.2/Modules/FindHTMLHelp.cmake b/share/cmake-3.6/Modules/FindHTMLHelp.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindHTMLHelp.cmake
rename to share/cmake-3.6/Modules/FindHTMLHelp.cmake
diff --git a/share/cmake-3.6/Modules/FindHg.cmake b/share/cmake-3.6/Modules/FindHg.cmake
new file mode 100644
index 0000000..bdbb79b
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindHg.cmake
@@ -0,0 +1,110 @@
+#.rst:
+# FindHg
+# ------
+#
+# Extract information from a mercurial working copy.
+#
+# The module defines the following variables:
+#
+# ::
+#
+#    HG_EXECUTABLE - path to mercurial command line client (hg)
+#    HG_FOUND - true if the command line client was found
+#    HG_VERSION_STRING - the version of mercurial found
+#
+# If the command line client executable is found the following macro is defined:
+#
+# ::
+#
+#   HG_WC_INFO(<dir> <var-prefix>)
+#
+# Hg_WC_INFO extracts information of a mercurial working copy
+# at a given location.  This macro defines the following variables:
+#
+# ::
+#
+#   <var-prefix>_WC_CHANGESET - current changeset
+#   <var-prefix>_WC_REVISION - current revision
+#
+# Example usage:
+#
+# ::
+#
+#    find_package(Hg)
+#    if(HG_FOUND)
+#      message("hg found: ${HG_EXECUTABLE}")
+#      HG_WC_INFO(${PROJECT_SOURCE_DIR} Project)
+#      message("Current revision is ${Project_WC_REVISION}")
+#      message("Current changeset is ${Project_WC_CHANGESET}")
+#    endif()
+
+#=============================================================================
+# Copyright 2010-2012 Kitware, Inc.
+# Copyright 2012      Rolf Eike Beer <eike@sf-mail.de>
+# Copyright 2014      Matthaeus G. Chajdas
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_program(HG_EXECUTABLE
+  NAMES hg
+  PATHS
+    [HKEY_LOCAL_MACHINE\\Software\\TortoiseHG]
+  PATH_SUFFIXES Mercurial
+  DOC "hg command line client"
+  )
+mark_as_advanced(HG_EXECUTABLE)
+
+if(HG_EXECUTABLE)
+  set(_saved_lc_all "$ENV{LC_ALL}")
+  set(ENV{LC_ALL} "C")
+
+  set(_saved_language "$ENV{LANGUAGE}")
+  set(ENV{LANGUAGE})
+
+  execute_process(COMMAND ${HG_EXECUTABLE} --version
+                  OUTPUT_VARIABLE hg_version
+                  ERROR_QUIET
+                  RESULT_VARIABLE hg_result
+                  OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+  set(ENV{LC_ALL} ${_saved_lc_all})
+  set(ENV{LANGUAGE} ${_saved_language})
+
+  if(hg_result MATCHES "is not a valid Win32 application")
+    set_property(CACHE HG_EXECUTABLE PROPERTY VALUE "HG_EXECUTABLE-NOTFOUND")
+  endif()
+  if(hg_version MATCHES "^Mercurial Distributed SCM \\(version ([0-9][^)]*)\\)")
+    set(HG_VERSION_STRING "${CMAKE_MATCH_1}")
+  endif()
+  unset(hg_version)
+
+  macro(HG_WC_INFO dir prefix)
+    execute_process(COMMAND ${HG_EXECUTABLE} id -i -n
+      WORKING_DIRECTORY ${dir}
+      RESULT_VARIABLE hg_id_result
+      ERROR_VARIABLE hg_id_error
+      OUTPUT_VARIABLE ${prefix}_WC_DATA
+      OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(NOT ${hg_id_result} EQUAL 0)
+      message(SEND_ERROR "Command \"${HG_EXECUTBALE} id -n\" in directory ${dir} failed with output:\n${hg_id_error}")
+    endif()
+
+    string(REGEX REPLACE "([0-9a-f]+)\\+? [0-9]+\\+?" "\\1" ${prefix}_WC_CHANGESET ${${prefix}_WC_DATA})
+    string(REGEX REPLACE "[0-9a-f]+\\+? ([0-9]+)\\+?" "\\1" ${prefix}_WC_REVISION ${${prefix}_WC_DATA})
+  endmacro(HG_WC_INFO)
+endif()
+
+# Handle the QUIETLY and REQUIRED arguments and set HG_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(Hg
+                                  REQUIRED_VARS HG_EXECUTABLE
+                                  VERSION_VAR HG_VERSION_STRING)
diff --git a/share/cmake-3.6/Modules/FindIce.cmake b/share/cmake-3.6/Modules/FindIce.cmake
new file mode 100644
index 0000000..3fa6cab
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindIce.cmake
@@ -0,0 +1,521 @@
+#.rst:
+# FindIce
+# -------
+#
+# Find the ZeroC Internet Communication Engine (ICE) programs,
+# libraries and datafiles.
+#
+# This module supports multiple components.
+# Components can include any of: ``Freeze``, ``Glacier2``, ``Ice``,
+# ``IceBox``, ``IceDB``, ``IceGrid``, ``IcePatch``, ``IceSSL``,
+# ``IceStorm``, ``IceUtil``, ``IceXML``, or ``Slice``.
+#
+# This module reports information about the Ice installation in
+# several variables.  General variables::
+#
+#   Ice_VERSION - Ice release version
+#   Ice_FOUND - true if the main programs and libraries were found
+#   Ice_LIBRARIES - component libraries to be linked
+#   Ice_INCLUDE_DIRS - the directories containing the Ice headers
+#   Ice_SLICE_DIRS - the directories containing the Ice slice interface
+#                    definitions
+#
+# Imported targets::
+#
+#   Ice::<C>
+#
+# Where ``<C>`` is the name of an Ice component, for example
+# ``Ice::Glacier2``.
+#
+# Ice slice programs are reported in::
+#
+#   Ice_SLICE2CPP_EXECUTABLE - path to slice2cpp executable
+#   Ice_SLICE2CS_EXECUTABLE - path to slice2cs executable
+#   Ice_SLICE2FREEZEJ_EXECUTABLE - path to slice2freezej executable
+#   Ice_SLICE2FREEZE_EXECUTABLE - path to slice2freeze executable
+#   Ice_SLICE2HTML_EXECUTABLE - path to slice2html executable
+#   Ice_SLICE2JAVA_EXECUTABLE - path to slice2java executable
+#   Ice_SLICE2JS_EXECUTABLE - path to slice2js executable
+#   Ice_SLICE2PHP_EXECUTABLE - path to slice2php executable
+#   Ice_SLICE2PY_EXECUTABLE - path to slice2py executable
+#   Ice_SLICE2RB_EXECUTABLE - path to slice2rb executable
+#
+# Ice programs are reported in::
+#
+#   Ice_GLACIER2ROUTER_EXECUTABLE - path to glacier2router executable
+#   Ice_ICEBOX_EXECUTABLE - path to icebox executable
+#   Ice_ICEBOXADMIN_EXECUTABLE - path to iceboxadmin executable
+#   Ice_ICEBOXD_EXECUTABLE - path to iceboxd executable
+#   Ice_ICEBOXNET_EXECUTABLE - path to iceboxnet executable
+#   Ice_ICEGRIDADMIN_EXECUTABLE - path to icegridadmin executable
+#   Ice_ICEGRIDNODE_EXECUTABLE - path to icegridnode executable
+#   Ice_ICEGRIDNODED_EXECUTABLE - path to icegridnoded executable
+#   Ice_ICEGRIDREGISTRY_EXECUTABLE - path to icegridregistry executable
+#   Ice_ICEGRIDREGISTRYD_EXECUTABLE - path to icegridregistryd executable
+#   Ice_ICEPATCH2CALC_EXECUTABLE - path to icepatch2calc executable
+#   Ice_ICEPATCH2CLIENT_EXECUTABLE - path to icepatch2client executable
+#   Ice_ICEPATCH2SERVER_EXECUTABLE - path to icepatch2server executable
+#   Ice_ICESERVICEINSTALL_EXECUTABLE - path to iceserviceinstall executable
+#   Ice_ICESTORMADMIN_EXECUTABLE - path to icestormadmin executable
+#   Ice_ICESTORMMIGRATE_EXECUTABLE - path to icestormmigrate executable
+#
+# Ice db programs (Windows only; standard system versions on all other
+# platforms) are reported in::
+#
+#   Ice_DB_ARCHIVE_EXECUTABLE - path to db_archive executable
+#   Ice_DB_CHECKPOINT_EXECUTABLE - path to db_checkpoint executable
+#   Ice_DB_DEADLOCK_EXECUTABLE - path to db_deadlock executable
+#   Ice_DB_DUMP_EXECUTABLE - path to db_dump executable
+#   Ice_DB_HOTBACKUP_EXECUTABLE - path to db_hotbackup executable
+#   Ice_DB_LOAD_EXECUTABLE - path to db_load executable
+#   Ice_DB_LOG_VERIFY_EXECUTABLE - path to db_log_verify executable
+#   Ice_DB_PRINTLOG_EXECUTABLE - path to db_printlog executable
+#   Ice_DB_RECOVER_EXECUTABLE - path to db_recover executable
+#   Ice_DB_STAT_EXECUTABLE - path to db_stat executable
+#   Ice_DB_TUNER_EXECUTABLE - path to db_tuner executable
+#   Ice_DB_UPGRADE_EXECUTABLE - path to db_upgrade executable
+#   Ice_DB_VERIFY_EXECUTABLE - path to db_verify executable
+#   Ice_DUMPDB_EXECUTABLE - path to dumpdb executable
+#   Ice_TRANSFORMDB_EXECUTABLE - path to transformdb executable
+#
+# Ice component libraries are reported in::
+#
+#   Ice_<C>_FOUND - ON if component was found
+#   Ice_<C>_LIBRARIES - libraries for component
+#
+# Note that ``<C>`` is the uppercased name of the component.
+#
+# This module reads hints about search results from::
+#
+#   Ice_HOME - the root of the Ice installation
+#
+# The environment variable ``ICE_HOME`` may also be used; the
+# Ice_HOME variable takes precedence.
+#
+# The following cache variables may also be set::
+#
+#   Ice_<P>_EXECUTABLE - the path to executable <P>
+#   Ice_INCLUDE_DIR - the directory containing the Ice headers
+#   Ice_SLICE_DIR - the directory containing the Ice slice interface
+#                   definitions
+#   Ice_<C>_LIBRARY - the library for component <C>
+#
+# .. note::
+#
+#   In most cases none of the above variables will require setting,
+#   unless multiple Ice versions are available and a specific version
+#   is required.  On Windows, the most recent version of Ice will be
+#   found through the registry.  On Unix, the programs, headers and
+#   libraries will usually be in standard locations, but Ice_SLICE_DIRS
+#   might not be automatically detected (commonly known locations are
+#   searched).  All the other variables are defaulted using Ice_HOME,
+#   if set.  It's possible to set Ice_HOME and selectively specify
+#   alternative locations for the other components; this might be
+#   required for e.g. newer versions of Visual Studio if the
+#   heuristics are not sufficient to identify the correct programs and
+#   libraries for the specific Visual Studio version.
+#
+# Other variables one may set to control this module are::
+#
+#   Ice_DEBUG - Set to ON to enable debug output from FindIce.
+
+# Written by Roger Leigh <rleigh@codelibre.net>
+
+#=============================================================================
+# Copyright 2014-2015 University of Dundee
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# The Ice checks are contained in a function due to the large number
+# of temporary variables needed.
+function(_Ice_FIND)
+  # Released versions of Ice, including generic short forms
+  set(ice_versions
+      3
+      3.6
+      3.6.0
+      3.5
+      3.5.1
+      3.5.0
+      3.4
+      3.4.2
+      3.4.1
+      3.4.0
+      3.3
+      3.3.1
+      3.3.0)
+
+  # Set up search paths, taking compiler into account.  Search Ice_HOME,
+  # with ICE_HOME in the environment as a fallback if unset.
+  if(Ice_HOME)
+    list(APPEND ice_roots "${Ice_HOME}")
+  else()
+    if(NOT "$ENV{ICE_HOME}" STREQUAL "")
+      file(TO_CMAKE_PATH "$ENV{ICE_HOME}" NATIVE_PATH)
+      list(APPEND ice_roots "${NATIVE_PATH}")
+      set(Ice_HOME "${NATIVE_PATH}"
+          CACHE PATH "Location of the Ice installation" FORCE)
+    endif()
+  endif()
+
+  if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+    # 64-bit path suffix
+    set(_x64 "/x64")
+    # 64-bit library directory
+    set(_lib64 "lib64")
+  endif()
+
+  if(MSVC_VERSION)
+    # VS 8.0
+    if(NOT MSVC_VERSION VERSION_LESS 1400 AND MSVC_VERSION VERSION_LESS 1500)
+      set(vcver "vc80")
+      set(vcyear "2005")
+    # VS 9.0
+    elseif(NOT MSVC_VERSION VERSION_LESS 1500 AND MSVC_VERSION VERSION_LESS 1600)
+      set(vcver "vc90")
+      set(vcyear "2008")
+    # VS 10.0
+    elseif(NOT MSVC_VERSION VERSION_LESS 1600 AND MSVC_VERSION VERSION_LESS 1700)
+      set(vcver "vc100")
+    # VS 11.0
+    elseif(NOT MSVC_VERSION VERSION_LESS 1700 AND MSVC_VERSION VERSION_LESS 1800)
+      set(vcver "vc110")
+    # VS 12.0
+    elseif(NOT MSVC_VERSION VERSION_LESS 1800 AND MSVC_VERSION VERSION_LESS 1900)
+      set(vcver "vc120")
+    # VS 14.0
+    elseif(NOT MSVC_VERSION VERSION_LESS 1900 AND MSVC_VERSION VERSION_LESS 2000)
+      set(vcver "vc140")
+    endif()
+  endif()
+
+  # For compatibility with ZeroC Windows builds.
+  if(vcver)
+    # Earlier Ice (3.3) builds don't use vcnnn subdirectories, but are harmless to check.
+    list(APPEND ice_binary_suffixes "bin/${vcver}${_x64}" "bin/${vcver}")
+    list(APPEND ice_library_suffixes "lib/${vcver}${_x64}" "lib/${vcver}")
+  endif()
+  # Generic 64-bit and 32-bit directories
+  list(APPEND ice_binary_suffixes "bin${_x64}" "bin")
+  list(APPEND ice_library_suffixes "${_lib64}" "lib${_x64}" "lib")
+  list(APPEND ice_include_suffixes "include")
+  list(APPEND ice_slice_suffixes "slice")
+
+  # On Windows, look in the registry for install locations.  Different
+  # versions of Ice install support different compiler versions.
+  if(vcver)
+    foreach(ice_version ${ice_versions})
+      # Ice 3.3 releases use a Visual Studio year suffix and value is
+      # enclosed in double quotes, though only the leading quote is
+      # returned by get_filename_component.
+      unset(ice_location)
+      if(vcyear)
+        get_filename_component(ice_location
+                               "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ZeroC\\Ice ${ice_version} for Visual Studio ${vcyear};InstallDir]"
+                               PATH)
+        if(ice_location AND NOT ("${ice_location}" STREQUAL "/registry" OR "${ice_location}" STREQUAL "/"))
+          string(REGEX REPLACE "^\"(.*)\"?$" "\\1" ice_location "${ice_location}")
+          get_filename_component(ice_location "${ice_location}" ABSOLUTE)
+        else()
+          unset(ice_location)
+        endif()
+      endif()
+      # Ice 3.4+ releases don't use a suffix
+      if(NOT ice_location OR "${ice_location}" STREQUAL "/registry")
+        get_filename_component(ice_location
+                               "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ZeroC\\Ice ${ice_version};InstallDir]"
+                               ABSOLUTE)
+      endif()
+
+      if(ice_location AND NOT "${ice_location}" STREQUAL "/registry")
+        list(APPEND ice_roots "${ice_location}")
+      endif()
+    endforeach()
+  else()
+    foreach(ice_version ${ice_versions})
+      # Prefer 64-bit variants if present (and using a 64-bit compiler)
+      list(APPEND ice_roots "/opt/Ice-${ice_version}")
+    endforeach()
+  endif()
+
+  set(db_programs
+      db_archive
+      db_checkpoint
+      db_deadlock
+      db_dump
+      db_hotbackup
+      db_load
+      db_log_verify
+      db_printlog
+      db_recover
+      db_stat
+      db_tuner
+      db_upgrade
+      db_verify
+      dumpdb
+      transformdb)
+
+  set(ice_programs
+      glacier2router
+      icebox
+      iceboxadmin
+      iceboxd
+      iceboxnet
+      icegridadmin
+      icegridnode
+      icegridnoded
+      icegridregistry
+      icegridregistryd
+      icepatch2calc
+      icepatch2client
+      icepatch2server
+      iceserviceinstall
+      icestormadmin
+      icestormmigrate)
+
+  set(slice_programs
+      slice2cpp
+      slice2cs
+      slice2freezej
+      slice2freeze
+      slice2html
+      slice2java
+      slice2js
+      slice2php
+      slice2py
+      slice2rb)
+
+  # Find all Ice programs
+  foreach(program ${db_programs} ${ice_programs} ${slice_programs})
+    string(TOUPPER "${program}" program_upcase)
+    set(cache_var "Ice_${program_upcase}_EXECUTABLE")
+    set(program_var "Ice_${program_upcase}_EXECUTABLE")
+    find_program("${cache_var}" "${program}"
+      HINTS ${ice_roots}
+      PATH_SUFFIXES ${ice_binary_suffixes}
+      DOC "Ice ${program} executable")
+    mark_as_advanced(cache_var)
+    set("${program_var}" "${${cache_var}}" PARENT_SCOPE)
+  endforeach()
+
+  # Get version.
+  if(Ice_SLICE2CPP_EXECUTABLE)
+    # Execute in C locale for safety
+    set(_Ice_SAVED_LC_ALL "$ENV{LC_ALL}")
+    set(ENV{LC_ALL} C)
+
+    execute_process(COMMAND ${Ice_SLICE2CPP_EXECUTABLE} --version
+      ERROR_VARIABLE Ice_VERSION_SLICE2CPP_FULL
+      ERROR_STRIP_TRAILING_WHITESPACE)
+
+    # restore the previous LC_ALL
+    set(ENV{LC_ALL} ${_Ice_SAVED_LC_ALL})
+
+    # Make short version
+    string(REGEX REPLACE "^(.*)\\.[^.]*$" "\\1" Ice_VERSION_SLICE2CPP_SHORT "${Ice_VERSION_SLICE2CPP_FULL}")
+    set(Ice_VERSION "${Ice_VERSION_SLICE2CPP_FULL}" PARENT_SCOPE)
+  endif()
+
+  if(NOT Ice_FIND_QUIETLY)
+    message(STATUS "Ice version: ${Ice_VERSION_SLICE2CPP_FULL}")
+  endif()
+
+  # Find include directory
+  find_path(Ice_INCLUDE_DIR
+            NAMES "Ice/Ice.h"
+            HINTS ${ice_roots}
+            PATH_SUFFIXES ${ice_include_suffixes}
+            DOC "Ice include directory")
+  set(Ice_INCLUDE_DIR "${Ice_INCLUDE_DIR}" PARENT_SCOPE)
+
+  # In common use on Linux, MacOS X (homebrew) and FreeBSD; prefer
+  # version-specific dir
+  list(APPEND ice_slice_paths
+       /usr/local/share /usr/share)
+  list(APPEND ice_slice_suffixes
+       "Ice-${Ice_VERSION_SLICE2CPP_FULL}/slice"
+       "Ice-${Ice_VERSION_SLICE2CPP_SHORT}/slice"
+       Ice)
+
+  # Find slice directory
+  find_path(Ice_SLICE_DIR
+            NAMES "Ice/Connection.ice"
+            HINTS ${ice_roots}
+                  ${ice_slice_paths}
+            PATH_SUFFIXES ${ice_slice_suffixes}
+            NO_DEFAULT_PATH
+            DOC "Ice slice directory")
+  set(Ice_SLICE_DIR "${Ice_SLICE_DIR}" PARENT_SCOPE)
+
+  # Find all Ice libraries
+  set(Ice_REQUIRED_LIBS_FOUND ON)
+  foreach(component ${Ice_FIND_COMPONENTS})
+    string(TOUPPER "${component}" component_upcase)
+    set(component_cache "Ice_${component_upcase}_LIBRARY")
+    set(component_found "${component_upcase}_FOUND")
+    find_library("${component_cache}" "${component}"
+      HINTS ${ice_roots}
+      PATH_SUFFIXES ${ice_library_suffixes}
+      DOC "Ice ${component} library")
+    mark_as_advanced("${component_cache}")
+    if(${component_cache})
+      set("${component_found}" ON)
+      list(APPEND Ice_LIBRARY "${${component_cache}}")
+    endif()
+    mark_as_advanced("${component_found}")
+    set("${component_cache}" "${${component_cache}}" PARENT_SCOPE)
+    set("${component_found}" "${${component_found}}" PARENT_SCOPE)
+    if(${component_found})
+      if (Ice_FIND_REQUIRED_${component})
+        list(APPEND Ice_LIBS_FOUND "${component} (required)")
+      else()
+        list(APPEND Ice_LIBS_FOUND "${component} (optional)")
+      endif()
+    else()
+      if (Ice_FIND_REQUIRED_${component})
+        set(Ice_REQUIRED_LIBS_FOUND OFF)
+        list(APPEND Ice_LIBS_NOTFOUND "${component} (required)")
+      else()
+        list(APPEND Ice_LIBS_NOTFOUND "${component} (optional)")
+      endif()
+    endif()
+  endforeach()
+  set(_Ice_REQUIRED_LIBS_FOUND "${Ice_REQUIRED_LIBS_FOUND}" PARENT_SCOPE)
+  set(Ice_LIBRARY "${Ice_LIBRARY}" PARENT_SCOPE)
+
+  if(NOT Ice_FIND_QUIETLY)
+    if(Ice_LIBS_FOUND)
+      message(STATUS "Found the following Ice libraries:")
+      foreach(found ${Ice_LIBS_FOUND})
+        message(STATUS "  ${found}")
+      endforeach()
+    endif()
+    if(Ice_LIBS_NOTFOUND)
+      message(STATUS "The following Ice libraries were not found:")
+      foreach(notfound ${Ice_LIBS_NOTFOUND})
+        message(STATUS "  ${notfound}")
+      endforeach()
+    endif()
+  endif()
+
+  if(Ice_DEBUG)
+    message(STATUS "--------FindIce.cmake search debug--------")
+    message(STATUS "ICE binary path search order: ${ice_roots}")
+    message(STATUS "ICE include path search order: ${ice_roots}")
+    message(STATUS "ICE slice path search order: ${ice_roots} ${ice_slice_paths}")
+    message(STATUS "ICE library path search order: ${ice_roots}")
+    message(STATUS "----------------")
+  endif()
+endfunction()
+
+_Ice_FIND()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(Ice
+                                  FOUND_VAR Ice_FOUND
+                                  REQUIRED_VARS Ice_SLICE2CPP_EXECUTABLE
+                                                Ice_INCLUDE_DIR
+                                                Ice_SLICE_DIR
+                                                Ice_LIBRARY
+                                                _Ice_REQUIRED_LIBS_FOUND
+                                  VERSION_VAR Ice_VERSION
+                                  FAIL_MESSAGE "Failed to find all Ice components")
+
+unset(_Ice_REQUIRED_LIBS_FOUND)
+
+if(Ice_FOUND)
+  set(Ice_INCLUDE_DIRS "${Ice_INCLUDE_DIR}")
+  set(Ice_SLICE_DIRS "${Ice_SLICE_DIR}")
+  set(Ice_LIBRARIES "${Ice_LIBRARY}")
+  foreach(_Ice_component ${Ice_FIND_COMPONENTS})
+    string(TOUPPER "${_Ice_component}" _Ice_component_upcase)
+    set(_Ice_component_cache "Ice_${_Ice_component_upcase}_LIBRARY")
+    set(_Ice_component_lib "Ice_${_Ice_component_upcase}_LIBRARIES")
+    set(_Ice_component_found "${_Ice_component_upcase}_FOUND")
+    set(_Ice_imported_target "Ice::${_Ice_component}")
+    if(${_Ice_component_found})
+      set("${_Ice_component_lib}" "${${_Ice_component_cache}}")
+      if(NOT TARGET ${_Ice_imported_target})
+        add_library(${_Ice_imported_target} UNKNOWN IMPORTED)
+        set_target_properties(${_Ice_imported_target} PROPERTIES
+          IMPORTED_LOCATION "${${_Ice_component_cache}}"
+          INTERFACE_INCLUDE_DIRECTORIES "${Ice_INCLUDE_DIR}")
+      endif()
+    endif()
+    unset(_Ice_component_upcase)
+    unset(_Ice_component_cache)
+    unset(_Ice_component_lib)
+    unset(_Ice_component_found)
+    unset(_Ice_imported_target)
+  endforeach()
+endif()
+
+if(Ice_DEBUG)
+  message(STATUS "--------FindIce.cmake results debug--------")
+  message(STATUS "Ice_VERSION number: ${Ice_VERSION}")
+  message(STATUS "Ice_HOME directory: ${Ice_HOME}")
+  message(STATUS "Ice_INCLUDE_DIR directory: ${Ice_INCLUDE_DIR}")
+  message(STATUS "Ice_SLICE_DIR directory: ${Ice_SLICE_DIR}")
+  message(STATUS "Ice_LIBRARIES: ${Ice_LIBRARIES}")
+
+  message(STATUS "slice2cpp executable: ${Ice_SLICE2CPP_EXECUTABLE}")
+  message(STATUS "slice2cs executable: ${Ice_SLICE2CS_EXECUTABLE}")
+  message(STATUS "slice2freezej executable: ${Ice_SLICE2FREEZEJ_EXECUTABLE}")
+  message(STATUS "slice2freeze executable: ${Ice_SLICE2FREEZE_EXECUTABLE}")
+  message(STATUS "slice2html executable: ${Ice_SLICE2HTML_EXECUTABLE}")
+  message(STATUS "slice2java executable: ${Ice_SLICE2JAVA_EXECUTABLE}")
+  message(STATUS "slice2js executable: ${Ice_SLICE2JS_EXECUTABLE}")
+  message(STATUS "slice2php executable: ${Ice_SLICE2PHP_EXECUTABLE}")
+  message(STATUS "slice2py executable: ${Ice_SLICE2PY_EXECUTABLE}")
+  message(STATUS "slice2rb executable: ${Ice_SLICE2RB_EXECUTABLE}")
+  message(STATUS "glacier2router executable: ${Ice_GLACIER2ROUTER_EXECUTABLE}")
+
+  message(STATUS "icebox executable: ${Ice_ICEBOX_EXECUTABLE}")
+  message(STATUS "iceboxadmin executable: ${Ice_ICEBOXADMIN_EXECUTABLE}")
+  message(STATUS "iceboxd executable: ${Ice_ICEBOXD_EXECUTABLE}")
+  message(STATUS "iceboxnet executable: ${Ice_ICEBOXNET_EXECUTABLE}")
+  message(STATUS "icegridadmin executable: ${Ice_ICEGRIDADMIN_EXECUTABLE}")
+  message(STATUS "icegridnode executable: ${Ice_ICEGRIDNODE_EXECUTABLE}")
+  message(STATUS "icegridnoded executable: ${Ice_ICEGRIDNODED_EXECUTABLE}")
+  message(STATUS "icegridregistry executable: ${Ice_ICEGRIDREGISTRY_EXECUTABLE}")
+  message(STATUS "icegridregistryd executable: ${Ice_ICEGRIDREGISTRYD_EXECUTABLE}")
+  message(STATUS "icepatch2calc executable: ${Ice_ICEPATCH2CALC_EXECUTABLE}")
+  message(STATUS "icepatch2client executable: ${Ice_ICEPATCH2CLIENT_EXECUTABLE}")
+  message(STATUS "icepatch2server executable: ${Ice_ICEPATCH2SERVER_EXECUTABLE}")
+  message(STATUS "iceserviceinstall executable: ${Ice_ICESERVICEINSTALL_EXECUTABLE}")
+  message(STATUS "icestormadmin executable: ${Ice_ICESTORMADMIN_EXECUTABLE}")
+  message(STATUS "icestormmigrate executable: ${Ice_ICESTORMMIGRATE_EXECUTABLE}")
+
+  message(STATUS "db_archive executable: ${Ice_DB_ARCHIVE_EXECUTABLE}")
+  message(STATUS "db_checkpoint executable: ${Ice_DB_CHECKPOINT_EXECUTABLE}")
+  message(STATUS "db_deadlock executable: ${Ice_DB_DEADLOCK_EXECUTABLE}")
+  message(STATUS "db_dump executable: ${Ice_DB_DUMP_EXECUTABLE}")
+  message(STATUS "db_hotbackup executable: ${Ice_DB_HOTBACKUP_EXECUTABLE}")
+  message(STATUS "db_load executable: ${Ice_DB_LOAD_EXECUTABLE}")
+  message(STATUS "db_log_verify executable: ${Ice_DB_LOG_VERIFY_EXECUTABLE}")
+  message(STATUS "db_printlog executable: ${Ice_DB_PRINTLOG_EXECUTABLE}")
+  message(STATUS "db_recover executable: ${Ice_DB_RECOVER_EXECUTABLE}")
+  message(STATUS "db_stat executable: ${Ice_DB_STAT_EXECUTABLE}")
+  message(STATUS "db_tuner executable: ${Ice_DB_TUNER_EXECUTABLE}")
+  message(STATUS "db_upgrade executable: ${Ice_DB_UPGRADE_EXECUTABLE}")
+  message(STATUS "db_verify executable: ${Ice_DB_VERIFY_EXECUTABLE}")
+  message(STATUS "dumpdb executable: ${Ice_DUMPDB_EXECUTABLE}")
+  message(STATUS "transformdb executable: ${Ice_TRANSFORMDB_EXECUTABLE}")
+
+  foreach(component ${Ice_FIND_COMPONENTS})
+    string(TOUPPER "${component}" component_upcase)
+    set(component_lib "Ice_${component_upcase}_LIBRARIES")
+    set(component_found "${component_upcase}_FOUND")
+    message(STATUS "${component} library found: ${${component_found}}")
+    message(STATUS "${component} library: ${${component_lib}}")
+  endforeach()
+  message(STATUS "----------------")
+endif()
diff --git a/share/cmake-3.2/Modules/FindIcotool.cmake b/share/cmake-3.6/Modules/FindIcotool.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindIcotool.cmake
rename to share/cmake-3.6/Modules/FindIcotool.cmake
diff --git a/share/cmake-3.2/Modules/FindImageMagick.cmake b/share/cmake-3.6/Modules/FindImageMagick.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindImageMagick.cmake
rename to share/cmake-3.6/Modules/FindImageMagick.cmake
diff --git a/share/cmake-3.2/Modules/FindIntl.cmake b/share/cmake-3.6/Modules/FindIntl.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindIntl.cmake
rename to share/cmake-3.6/Modules/FindIntl.cmake
diff --git a/share/cmake-3.6/Modules/FindJNI.cmake b/share/cmake-3.6/Modules/FindJNI.cmake
new file mode 100644
index 0000000..8fe8f7a
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindJNI.cmake
@@ -0,0 +1,335 @@
+#.rst:
+# FindJNI
+# -------
+#
+# Find JNI java libraries.
+#
+# This module finds if Java is installed and determines where the
+# include files and libraries are.  It also determines what the name of
+# the library is.  The caller may set variable JAVA_HOME to specify a
+# Java installation prefix explicitly.
+#
+# This module sets the following result variables:
+#
+# ::
+#
+#   JNI_INCLUDE_DIRS      = the include dirs to use
+#   JNI_LIBRARIES         = the libraries to use
+#   JNI_FOUND             = TRUE if JNI headers and libraries were found.
+#   JAVA_AWT_LIBRARY      = the path to the jawt library
+#   JAVA_JVM_LIBRARY      = the path to the jvm library
+#   JAVA_INCLUDE_PATH     = the include path to jni.h
+#   JAVA_INCLUDE_PATH2    = the include path to jni_md.h
+#   JAVA_AWT_INCLUDE_PATH = the include path to jawt.h
+
+#=============================================================================
+# Copyright 2001-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Expand {libarch} occurences to java_libarch subdirectory(-ies) and set ${_var}
+macro(java_append_library_directories _var)
+    # Determine java arch-specific library subdir
+    # Mostly based on openjdk/jdk/make/common/shared/Platform.gmk as of openjdk
+    # 1.6.0_18 + icedtea patches. However, it would be much better to base the
+    # guess on the first part of the GNU config.guess platform triplet.
+    if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
+      if(CMAKE_LIBRARY_ARCHITECTURE STREQUAL "x86_64-linux-gnux32")
+        set(_java_libarch "x32" "amd64" "i386")
+      else()
+        set(_java_libarch "amd64" "i386")
+      endif()
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^i.86$")
+        set(_java_libarch "i386")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^alpha")
+        set(_java_libarch "alpha")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^arm")
+        # Subdir is "arm" for both big-endian (arm) and little-endian (armel).
+        set(_java_libarch "arm")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^mips")
+        # mips* machines are bi-endian mostly so processor does not tell
+        # endianess of the underlying system.
+        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "mips" "mipsel" "mipseb" "mips64" "mips64el" "mipsn32" "mipsn32el")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64le")
+        set(_java_libarch "ppc64" "ppc64le")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)64")
+        set(_java_libarch "ppc64" "ppc")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(powerpc|ppc)")
+        set(_java_libarch "ppc" "ppc64")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^sparc")
+        # Both flavours can run on the same processor
+        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "sparc" "sparcv9")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(parisc|hppa)")
+        set(_java_libarch "parisc" "parisc64")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^s390")
+        # s390 binaries can run on s390x machines
+        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}" "s390" "s390x")
+    elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^sh")
+        set(_java_libarch "sh")
+    else()
+        set(_java_libarch "${CMAKE_SYSTEM_PROCESSOR}")
+    endif()
+
+    # Append default list architectures if CMAKE_SYSTEM_PROCESSOR was empty or
+    # system is non-Linux (where the code above has not been well tested)
+    if(NOT _java_libarch OR NOT (CMAKE_SYSTEM_NAME MATCHES "Linux"))
+        list(APPEND _java_libarch "i386" "amd64" "ppc")
+    endif()
+
+    # Sometimes ${CMAKE_SYSTEM_PROCESSOR} is added to the list to prefer
+    # current value to a hardcoded list. Remove possible duplicates.
+    list(REMOVE_DUPLICATES _java_libarch)
+
+    foreach(_path ${ARGN})
+        if(_path MATCHES "{libarch}")
+            foreach(_libarch ${_java_libarch})
+                string(REPLACE "{libarch}" "${_libarch}" _newpath "${_path}")
+                if(EXISTS ${_newpath})
+                    list(APPEND ${_var} "${_newpath}")
+                endif()
+            endforeach()
+        else()
+            if(EXISTS ${_path})
+                list(APPEND ${_var} "${_path}")
+            endif()
+        endif()
+    endforeach()
+endmacro()
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindJavaCommon.cmake)
+
+# Save CMAKE_FIND_FRAMEWORK
+if(DEFINED CMAKE_FIND_FRAMEWORK)
+  set(_JNI_CMAKE_FIND_FRAMEWORK ${CMAKE_FIND_FRAMEWORK})
+else()
+  unset(_JNI_CMAKE_FIND_FRAMEWORK)
+endif()
+
+if(_JAVA_HOME_EXPLICIT)
+  set(CMAKE_FIND_FRAMEWORK NEVER)
+endif()
+
+set(JAVA_AWT_LIBRARY_DIRECTORIES)
+if(_JAVA_HOME)
+  JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_LIBRARY_DIRECTORIES
+    ${_JAVA_HOME}/jre/lib/{libarch}
+    ${_JAVA_HOME}/jre/lib
+    ${_JAVA_HOME}/lib/{libarch}
+    ${_JAVA_HOME}/lib
+    ${_JAVA_HOME}
+    )
+endif()
+get_filename_component(java_install_version
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit;CurrentVersion]" NAME)
+
+list(APPEND JAVA_AWT_LIBRARY_DIRECTORIES
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/lib"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/lib"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\${java_install_version};JavaHome]/lib"
+  )
+JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_LIBRARY_DIRECTORIES
+  /usr/lib
+  /usr/local/lib
+  /usr/lib/jvm/java/lib
+  /usr/lib/java/jre/lib/{libarch}
+  /usr/lib/jvm/jre/lib/{libarch}
+  /usr/local/lib/java/jre/lib/{libarch}
+  /usr/local/share/java/jre/lib/{libarch}
+  /usr/lib/j2sdk1.4-sun/jre/lib/{libarch}
+  /usr/lib/j2sdk1.5-sun/jre/lib/{libarch}
+  /opt/sun-jdk-1.5.0.04/jre/lib/{libarch}
+  /usr/lib/jvm/java-6-sun/jre/lib/{libarch}
+  /usr/lib/jvm/java-1.5.0-sun/jre/lib/{libarch}
+  /usr/lib/jvm/java-6-sun-1.6.0.00/jre/lib/{libarch}       # can this one be removed according to #8821 ? Alex
+  /usr/lib/jvm/java-6-openjdk/jre/lib/{libarch}
+  /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/jre/lib/{libarch}        # fedora
+  /usr/lib/jvm/java-8-openjdk-{libarch}/lib/{libarch}              # ubuntu 15.10
+  /usr/lib/jvm/java-7-openjdk-{libarch}/lib/{libarch}              # ubuntu 15.10
+  /usr/lib/jvm/java-6-openjdk-{libarch}/lib/{libarch}              # ubuntu 15.10
+  # Debian specific paths for default JVM
+  /usr/lib/jvm/default-java/jre/lib/{libarch}
+  /usr/lib/jvm/default-java/jre/lib
+  /usr/lib/jvm/default-java/lib
+  # OpenBSD specific paths for default JVM
+  /usr/local/jdk-1.7.0/jre/lib/{libarch}
+  /usr/local/jre-1.7.0/lib/{libarch}
+  /usr/local/jdk-1.6.0/jre/lib/{libarch}
+  /usr/local/jre-1.6.0/lib/{libarch}
+  # SuSE specific paths for default JVM
+  /usr/lib64/jvm/java/jre/lib/{libarch}
+  /usr/lib64/jvm/jre/lib/{libarch}
+  )
+
+set(JAVA_JVM_LIBRARY_DIRECTORIES)
+foreach(dir ${JAVA_AWT_LIBRARY_DIRECTORIES})
+  list(APPEND JAVA_JVM_LIBRARY_DIRECTORIES
+    "${dir}"
+    "${dir}/client"
+    "${dir}/server"
+    # IBM SDK, Java Technology Edition, specific paths
+    "${dir}/j9vm"
+    "${dir}/default"
+    )
+endforeach()
+
+set(JAVA_AWT_INCLUDE_DIRECTORIES)
+if(_JAVA_HOME)
+  list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES ${_JAVA_HOME}/include)
+endif()
+list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/include"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/include"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\${java_install_version};JavaHome]/include"
+)
+
+JAVA_APPEND_LIBRARY_DIRECTORIES(JAVA_AWT_INCLUDE_DIRECTORIES
+  /usr/include
+  /usr/local/include
+  /usr/lib/java/include
+  /usr/local/lib/java/include
+  /usr/lib/jvm/java/include
+  /usr/lib/jvm/java-6-sun/include
+  /usr/lib/jvm/java-1.5.0-sun/include
+  /usr/lib/jvm/java-6-sun-1.6.0.00/include       # can this one be removed according to #8821 ? Alex
+  /usr/lib/jvm/java-6-openjdk/include
+  /usr/lib/jvm/java-8-openjdk-{libarch}/include  # ubuntu 15.10
+  /usr/lib/jvm/java-7-openjdk-{libarch}/include  # ubuntu 15.10
+  /usr/lib/jvm/java-6-openjdk-{libarch}/include  # ubuntu 15.10
+  /usr/local/share/java/include
+  /usr/lib/j2sdk1.4-sun/include
+  /usr/lib/j2sdk1.5-sun/include
+  /opt/sun-jdk-1.5.0.04/include
+  # Debian specific path for default JVM
+  /usr/lib/jvm/default-java/include
+  # OpenBSD specific path for default JVM
+  /usr/local/jdk-1.7.0/include
+  /usr/local/jdk-1.6.0/include
+  # SuSE specific paths for default JVM
+  /usr/lib64/jvm/java/include
+  )
+
+foreach(JAVA_PROG "${JAVA_RUNTIME}" "${JAVA_COMPILE}" "${JAVA_ARCHIVE}")
+  get_filename_component(jpath "${JAVA_PROG}" PATH)
+  foreach(JAVA_INC_PATH ../include ../java/include ../share/java/include)
+    if(EXISTS ${jpath}/${JAVA_INC_PATH})
+      list(APPEND JAVA_AWT_INCLUDE_DIRECTORIES "${jpath}/${JAVA_INC_PATH}")
+    endif()
+  endforeach()
+  foreach(JAVA_LIB_PATH
+    ../lib ../jre/lib ../jre/lib/i386
+    ../java/lib ../java/jre/lib ../java/jre/lib/i386
+    ../share/java/lib ../share/java/jre/lib ../share/java/jre/lib/i386)
+    if(EXISTS ${jpath}/${JAVA_LIB_PATH})
+      list(APPEND JAVA_AWT_LIBRARY_DIRECTORIES "${jpath}/${JAVA_LIB_PATH}")
+    endif()
+  endforeach()
+endforeach()
+
+if(APPLE)
+  if(CMAKE_FIND_FRAMEWORK STREQUAL "ONLY")
+    set(_JNI_SEARCHES FRAMEWORK)
+  elseif(CMAKE_FIND_FRAMEWORK STREQUAL "NEVER")
+    set(_JNI_SEARCHES NORMAL)
+  elseif(CMAKE_FIND_FRAMEWORK STREQUAL "LAST")
+    set(_JNI_SEARCHES NORMAL FRAMEWORK)
+  else()
+    set(_JNI_SEARCHES FRAMEWORK NORMAL)
+  endif()
+  set(_JNI_FRAMEWORK_JVM NAMES JavaVM)
+  set(_JNI_FRAMEWORK_JAWT "${_JNI_FRAMEWORK_JVM}")
+else()
+  set(_JNI_SEARCHES NORMAL)
+endif()
+
+set(_JNI_NORMAL_JVM
+  NAMES jvm
+  PATHS ${JAVA_JVM_LIBRARY_DIRECTORIES}
+  )
+
+set(_JNI_NORMAL_JAWT
+  NAMES jawt
+  PATHS ${JAVA_AWT_LIBRARY_DIRECTORIES}
+  )
+
+foreach(search ${_JNI_SEARCHES})
+  find_library(JAVA_JVM_LIBRARY ${_JNI_${search}_JVM})
+  find_library(JAVA_AWT_LIBRARY ${_JNI_${search}_JAWT})
+  if(JAVA_JVM_LIBRARY)
+    break()
+  endif()
+endforeach()
+unset(_JNI_SEARCHES)
+unset(_JNI_FRAMEWORK_JVM)
+unset(_JNI_FRAMEWORK_JAWT)
+unset(_JNI_NORMAL_JVM)
+unset(_JNI_NORMAL_JAWT)
+
+# Find headers matching the library.
+if("${JAVA_JVM_LIBRARY};${JAVA_AWT_LIBRARY};" MATCHES "(/JavaVM.framework|-framework JavaVM);")
+  set(CMAKE_FIND_FRAMEWORK ONLY)
+else()
+  set(CMAKE_FIND_FRAMEWORK NEVER)
+endif()
+
+# add in the include path
+find_path(JAVA_INCLUDE_PATH jni.h
+  ${JAVA_AWT_INCLUDE_DIRECTORIES}
+)
+
+find_path(JAVA_INCLUDE_PATH2 NAMES jni_md.h jniport.h
+  PATHS
+  ${JAVA_INCLUDE_PATH}
+  ${JAVA_INCLUDE_PATH}/darwin
+  ${JAVA_INCLUDE_PATH}/win32
+  ${JAVA_INCLUDE_PATH}/linux
+  ${JAVA_INCLUDE_PATH}/freebsd
+  ${JAVA_INCLUDE_PATH}/openbsd
+  ${JAVA_INCLUDE_PATH}/solaris
+  ${JAVA_INCLUDE_PATH}/hp-ux
+  ${JAVA_INCLUDE_PATH}/alpha
+  ${JAVA_INCLUDE_PATH}/aix
+)
+
+find_path(JAVA_AWT_INCLUDE_PATH jawt.h
+  ${JAVA_INCLUDE_PATH}
+)
+
+# Restore CMAKE_FIND_FRAMEWORK
+if(DEFINED _JNI_CMAKE_FIND_FRAMEWORK)
+  set(CMAKE_FIND_FRAMEWORK ${_JNI_CMAKE_FIND_FRAMEWORK})
+  unset(_JNI_CMAKE_FIND_FRAMEWORK)
+else()
+  unset(CMAKE_FIND_FRAMEWORK)
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(JNI  DEFAULT_MSG  JAVA_AWT_LIBRARY JAVA_JVM_LIBRARY
+                                                    JAVA_INCLUDE_PATH  JAVA_INCLUDE_PATH2 JAVA_AWT_INCLUDE_PATH)
+
+mark_as_advanced(
+  JAVA_AWT_LIBRARY
+  JAVA_JVM_LIBRARY
+  JAVA_AWT_INCLUDE_PATH
+  JAVA_INCLUDE_PATH
+  JAVA_INCLUDE_PATH2
+)
+
+set(JNI_LIBRARIES
+  ${JAVA_AWT_LIBRARY}
+  ${JAVA_JVM_LIBRARY}
+)
+
+set(JNI_INCLUDE_DIRS
+  ${JAVA_INCLUDE_PATH}
+  ${JAVA_INCLUDE_PATH2}
+  ${JAVA_AWT_INCLUDE_PATH}
+)
+
diff --git a/share/cmake-3.2/Modules/FindJPEG.cmake b/share/cmake-3.6/Modules/FindJPEG.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindJPEG.cmake
rename to share/cmake-3.6/Modules/FindJPEG.cmake
diff --git a/share/cmake-3.2/Modules/FindJasper.cmake b/share/cmake-3.6/Modules/FindJasper.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindJasper.cmake
rename to share/cmake-3.6/Modules/FindJasper.cmake
diff --git a/share/cmake-3.6/Modules/FindJava.cmake b/share/cmake-3.6/Modules/FindJava.cmake
new file mode 100644
index 0000000..c643d9b
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindJava.cmake
@@ -0,0 +1,277 @@
+#.rst:
+# FindJava
+# --------
+#
+# Find Java
+#
+# This module finds if Java is installed and determines where the
+# include files and libraries are.  The caller may set variable JAVA_HOME
+# to specify a Java installation prefix explicitly.
+#
+#
+# Specify one or more of the following components as you call this find module. See example below.
+#
+# ::
+#
+#   Runtime     = User just want to execute some Java byte-compiled
+#   Development = Development tools (java, javac, javah and javadoc), includes Runtime component
+#   IdlJ        = idl compiler for Java
+#   JarSigner   = signer tool for jar
+#
+#
+# This module sets the following result variables:
+#
+# ::
+#
+#   Java_JAVA_EXECUTABLE      = the full path to the Java runtime
+#   Java_JAVAC_EXECUTABLE     = the full path to the Java compiler
+#   Java_JAVAH_EXECUTABLE     = the full path to the Java header generator
+#   Java_JAVADOC_EXECUTABLE   = the full path to the Java documentation generator
+#   Java_IDLJ_EXECUTABLE      = the full path to the Java idl compiler
+#   Java_JAR_EXECUTABLE       = the full path to the Java archiver
+#   Java_JARSIGNER_EXECUTABLE = the full path to the Java jar signer
+#   Java_VERSION_STRING       = Version of java found, eg. 1.6.0_12
+#   Java_VERSION_MAJOR        = The major version of the package found.
+#   Java_VERSION_MINOR        = The minor version of the package found.
+#   Java_VERSION_PATCH        = The patch version of the package found.
+#   Java_VERSION_TWEAK        = The tweak version of the package found (after '_')
+#   Java_VERSION              = This is set to: $major.$minor.$patch(.$tweak)
+#
+#
+#
+# The minimum required version of Java can be specified using the
+# standard CMake syntax, e.g.  find_package(Java 1.5)
+#
+# NOTE: ${Java_VERSION} and ${Java_VERSION_STRING} are not guaranteed to
+# be identical.  For example some java version may return:
+# Java_VERSION_STRING = 1.5.0_17 and Java_VERSION = 1.5.0.17
+#
+# another example is the Java OEM, with: Java_VERSION_STRING = 1.6.0-oem
+# and Java_VERSION = 1.6.0
+#
+# For these components the following variables are set:
+#
+# ::
+#
+#   Java_FOUND                    - TRUE if all components are found.
+#   Java_INCLUDE_DIRS             - Full paths to all include dirs.
+#   Java_LIBRARIES                - Full paths to all libraries.
+#   Java_<component>_FOUND        - TRUE if <component> is found.
+#
+#
+#
+# Example Usages:
+#
+# ::
+#
+#   find_package(Java)
+#   find_package(Java COMPONENTS Runtime)
+#   find_package(Java COMPONENTS Development)
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+# Copyright 2009-2011 Mathieu Malaterre <mathieu.malaterre@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindJavaCommon.cmake)
+
+# The HINTS option should only be used for values computed from the system.
+set(_JAVA_HINTS)
+if(_JAVA_HOME)
+  list(APPEND _JAVA_HINTS ${_JAVA_HOME}/bin)
+endif()
+list(APPEND _JAVA_HINTS
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\2.0;JavaHome]/bin"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.9;JavaHome]/bin"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.8;JavaHome]/bin"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.7;JavaHome]/bin"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.6;JavaHome]/bin"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.5;JavaHome]/bin"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.4;JavaHome]/bin"
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/bin"
+  )
+# Hard-coded guesses should still go in PATHS. This ensures that the user
+# environment can always override hard guesses.
+set(_JAVA_PATHS
+  /usr/lib/java/bin
+  /usr/share/java/bin
+  /usr/local/java/bin
+  /usr/local/java/share/bin
+  /usr/java/j2sdk1.4.2_04
+  /usr/lib/j2sdk1.4-sun/bin
+  /usr/java/j2sdk1.4.2_09/bin
+  /usr/lib/j2sdk1.5-sun/bin
+  /opt/sun-jdk-1.5.0.04/bin
+  /usr/local/jdk-1.7.0/bin
+  /usr/local/jdk-1.6.0/bin
+  )
+find_program(Java_JAVA_EXECUTABLE
+  NAMES java
+  HINTS ${_JAVA_HINTS}
+  PATHS ${_JAVA_PATHS}
+)
+
+if(Java_JAVA_EXECUTABLE)
+    execute_process(COMMAND ${Java_JAVA_EXECUTABLE} -version
+      RESULT_VARIABLE res
+      OUTPUT_VARIABLE var
+      ERROR_VARIABLE var # sun-java output to stderr
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      ERROR_STRIP_TRAILING_WHITESPACE)
+    if( res )
+      if(var MATCHES "No Java runtime present, requesting install")
+        set_property(CACHE Java_JAVA_EXECUTABLE
+          PROPERTY VALUE "Java_JAVA_EXECUTABLE-NOTFOUND")
+      elseif(${Java_FIND_REQUIRED})
+        message( FATAL_ERROR "Error executing java -version" )
+      else()
+        message( STATUS "Warning, could not run java -version")
+      endif()
+    else()
+      # extract major/minor version and patch level from "java -version" output
+      # Tested on linux using
+      # 1. Sun / Sun OEM
+      # 2. OpenJDK 1.6
+      # 3. GCJ 1.5
+      # 4. Kaffe 1.4.2
+      # 5. OpenJDK 1.7.x on OpenBSD
+      if(var MATCHES "java version \"([0-9]+\\.[0-9]+\\.[0-9_.]+.*)\"")
+        # This is most likely Sun / OpenJDK, or maybe GCJ-java compat layer
+        set(Java_VERSION_STRING "${CMAKE_MATCH_1}")
+      elseif(var MATCHES "java full version \"kaffe-([0-9]+\\.[0-9]+\\.[0-9_]+)\"")
+        # Kaffe style
+        set(Java_VERSION_STRING "${CMAKE_MATCH_1}")
+      elseif(var MATCHES "openjdk version \"([0-9]+\\.[0-9]+\\.[0-9_]+.*)\"")
+        # OpenJDK ver 1.7.x on OpenBSD
+        set(Java_VERSION_STRING "${CMAKE_MATCH_1}")
+      else()
+        if(NOT Java_FIND_QUIETLY)
+          message(WARNING "regex not supported: ${var}. Please report")
+        endif()
+      endif()
+      string( REGEX REPLACE "([0-9]+).*" "\\1" Java_VERSION_MAJOR "${Java_VERSION_STRING}" )
+      string( REGEX REPLACE "[0-9]+\\.([0-9]+).*" "\\1" Java_VERSION_MINOR "${Java_VERSION_STRING}" )
+      string( REGEX REPLACE "[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" Java_VERSION_PATCH "${Java_VERSION_STRING}" )
+      # warning tweak version can be empty:
+      string( REGEX REPLACE "[0-9]+\\.[0-9]+\\.[0-9]+[_\\.]?([0-9]*).*$" "\\1" Java_VERSION_TWEAK "${Java_VERSION_STRING}" )
+      if( Java_VERSION_TWEAK STREQUAL "" ) # check case where tweak is not defined
+        set(Java_VERSION ${Java_VERSION_MAJOR}.${Java_VERSION_MINOR}.${Java_VERSION_PATCH})
+      else()
+        set(Java_VERSION ${Java_VERSION_MAJOR}.${Java_VERSION_MINOR}.${Java_VERSION_PATCH}.${Java_VERSION_TWEAK})
+      endif()
+    endif()
+
+endif()
+
+
+find_program(Java_JAR_EXECUTABLE
+  NAMES jar
+  HINTS ${_JAVA_HINTS}
+  PATHS ${_JAVA_PATHS}
+)
+
+find_program(Java_JAVAC_EXECUTABLE
+  NAMES javac
+  HINTS ${_JAVA_HINTS}
+  PATHS ${_JAVA_PATHS}
+)
+
+find_program(Java_JAVAH_EXECUTABLE
+  NAMES javah
+  HINTS ${_JAVA_HINTS}
+  PATHS ${_JAVA_PATHS}
+)
+
+find_program(Java_JAVADOC_EXECUTABLE
+  NAMES javadoc
+  HINTS ${_JAVA_HINTS}
+  PATHS ${_JAVA_PATHS}
+)
+
+find_program(Java_IDLJ_EXECUTABLE
+  NAMES idlj
+  HINTS ${_JAVA_HINTS}
+  PATHS ${_JAVA_PATHS}
+)
+
+find_program(Java_JARSIGNER_EXECUTABLE
+  NAMES jarsigner
+  HINTS ${_JAVA_HINTS}
+  PATHS ${_JAVA_PATHS}
+)
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+if(Java_FIND_COMPONENTS)
+  set(_JAVA_REQUIRED_VARS)
+  foreach(component ${Java_FIND_COMPONENTS})
+    # User just want to execute some Java byte-compiled
+    If(component STREQUAL "Runtime")
+      list(APPEND _JAVA_REQUIRED_VARS Java_JAVA_EXECUTABLE)
+      if(Java_JAVA_EXECUTABLE)
+        set(Java_Runtime_FOUND TRUE)
+      endif()
+    elseif(component STREQUAL "Development")
+      list(APPEND _JAVA_REQUIRED_VARS Java_JAVA_EXECUTABLE Java_JAVAC_EXECUTABLE
+                                      Java_JAVAH_EXECUTABLE Java_JAVADOC_EXECUTABLE)
+      if(Java_JAVA_EXECUTABLE AND Java_JAVAC_EXECUTABLE
+          AND Java_JAVAH_EXECUTABLE AND Java_JAVADOC_EXECUTABLE)
+        set(Java_Development_FOUND TRUE)
+      endif()
+    elseif(component STREQUAL "IdlJ")
+      list(APPEND _JAVA_REQUIRED_VARS Java_IDLJ_EXECUTABLE)
+      if(Java_IDLJ_EXECUTABLE)
+        set(Java_IdlJ_FOUND TRUE)
+      endif()
+    elseif(component STREQUAL "JarSigner")
+      list(APPEND _JAVA_REQUIRED_VARS Java_JARSIGNER_EXECUTABLE)
+      if(Java_JARSIGNER_EXECUTABLE)
+        set(Java_JarSigner_FOUND TRUE)
+      endif()
+    else()
+      message(FATAL_ERROR "Comp: ${component} is not handled")
+    endif()
+  endforeach()
+  list (REMOVE_DUPLICATES _JAVA_REQUIRED_VARS)
+  find_package_handle_standard_args(Java
+    REQUIRED_VARS ${_JAVA_REQUIRED_VARS} HANDLE_COMPONENTS
+    VERSION_VAR Java_VERSION
+    )
+  if(Java_FOUND)
+    foreach(component ${Java_FIND_COMPONENTS})
+      set(Java_${component}_FOUND TRUE)
+    endforeach()
+  endif()
+else()
+  # Check for Development
+  find_package_handle_standard_args(Java
+    REQUIRED_VARS Java_JAVA_EXECUTABLE Java_JAR_EXECUTABLE Java_JAVAC_EXECUTABLE
+                  Java_JAVAH_EXECUTABLE Java_JAVADOC_EXECUTABLE
+    VERSION_VAR Java_VERSION
+    )
+endif()
+
+
+mark_as_advanced(
+  Java_JAVA_EXECUTABLE
+  Java_JAR_EXECUTABLE
+  Java_JAVAC_EXECUTABLE
+  Java_JAVAH_EXECUTABLE
+  Java_JAVADOC_EXECUTABLE
+  Java_IDLJ_EXECUTABLE
+  Java_JARSIGNER_EXECUTABLE
+  )
+
+# LEGACY
+set(JAVA_RUNTIME ${Java_JAVA_EXECUTABLE})
+set(JAVA_ARCHIVE ${Java_JAR_EXECUTABLE})
+set(JAVA_COMPILE ${Java_JAVAC_EXECUTABLE})
+
diff --git a/share/cmake-3.2/Modules/FindKDE3.cmake b/share/cmake-3.6/Modules/FindKDE3.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindKDE3.cmake
rename to share/cmake-3.6/Modules/FindKDE3.cmake
diff --git a/share/cmake-3.6/Modules/FindKDE4.cmake b/share/cmake-3.6/Modules/FindKDE4.cmake
new file mode 100644
index 0000000..5530166
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindKDE4.cmake
@@ -0,0 +1,113 @@
+#.rst:
+# FindKDE4
+# --------
+#
+#
+#
+# Find KDE4 and provide all necessary variables and macros to compile
+# software for it.  It looks for KDE 4 in the following directories in
+# the given order:
+#
+# ::
+#
+#   CMAKE_INSTALL_PREFIX
+#   KDEDIRS
+#   /opt/kde4
+#
+#
+#
+# Please look in FindKDE4Internal.cmake and KDE4Macros.cmake for more
+# information.  They are installed with the KDE 4 libraries in
+# $KDEDIRS/share/apps/cmake/modules/.
+#
+# Author: Alexander Neundorf <neundorf@kde.org>
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# If Qt3 has already been found, fail.
+if(QT_QT_LIBRARY)
+  if(KDE4_FIND_REQUIRED)
+    message( FATAL_ERROR "KDE4/Qt4 and Qt3 cannot be used together in one project.")
+  else()
+    if(NOT KDE4_FIND_QUIETLY)
+      message( STATUS    "KDE4/Qt4 and Qt3 cannot be used together in one project.")
+    endif()
+    return()
+  endif()
+endif()
+
+file(TO_CMAKE_PATH "$ENV{KDEDIRS}" _KDEDIRS)
+
+# when cross compiling, searching kde4-config in order to run it later on
+# doesn't make a lot of sense. We'll have to do something about this.
+# Searching always in the target environment ? Then we get at least the correct one,
+# still it can't be used to run it. Alex
+
+# For KDE4 kde-config has been renamed to kde4-config
+find_program(KDE4_KDECONFIG_EXECUTABLE NAMES kde4-config
+   # the suffix must be used since KDEDIRS can be a list of directories which don't have bin/ appended
+   PATH_SUFFIXES bin
+   HINTS
+   ${CMAKE_INSTALL_PREFIX}
+   ${_KDEDIRS}
+   /opt/kde4
+   ONLY_CMAKE_FIND_ROOT_PATH
+   )
+
+if (NOT KDE4_KDECONFIG_EXECUTABLE)
+   if (KDE4_FIND_REQUIRED)
+      message(FATAL_ERROR "ERROR: Could not find KDE4 kde4-config")
+   endif ()
+endif ()
+
+
+# when cross compiling, KDE4_DATA_DIR may be already preset
+if(NOT KDE4_DATA_DIR)
+   if(CMAKE_CROSSCOMPILING)
+      # when cross compiling, don't run kde4-config but use its location as install dir
+      get_filename_component(KDE4_DATA_DIR "${KDE4_KDECONFIG_EXECUTABLE}" PATH)
+      get_filename_component(KDE4_DATA_DIR "${KDE4_DATA_DIR}" PATH)
+   else()
+      # then ask kde4-config for the kde data dirs
+
+      if(KDE4_KDECONFIG_EXECUTABLE)
+        execute_process(COMMAND "${KDE4_KDECONFIG_EXECUTABLE}" --path data OUTPUT_VARIABLE _data_DIR ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+        file(TO_CMAKE_PATH "${_data_DIR}" _data_DIR)
+        # then check the data dirs for FindKDE4Internal.cmake
+        find_path(KDE4_DATA_DIR cmake/modules/FindKDE4Internal.cmake HINTS ${_data_DIR})
+      endif()
+   endif()
+endif()
+
+# if it has been found...
+if (KDE4_DATA_DIR)
+
+   set(CMAKE_MODULE_PATH  ${CMAKE_MODULE_PATH} ${KDE4_DATA_DIR}/cmake/modules)
+
+   if (KDE4_FIND_QUIETLY)
+      set(_quiet QUIET)
+   endif ()
+
+   if (KDE4_FIND_REQUIRED)
+      set(_req REQUIRED)
+   endif ()
+
+   # use FindKDE4Internal.cmake to do the rest
+   find_package(KDE4Internal ${_req} ${_quiet} NO_POLICY_SCOPE)
+else ()
+   if (KDE4_FIND_REQUIRED)
+      message(FATAL_ERROR "ERROR: cmake/modules/FindKDE4Internal.cmake not found in ${_data_DIR}")
+   endif ()
+endif ()
diff --git a/share/cmake-3.6/Modules/FindLAPACK.cmake b/share/cmake-3.6/Modules/FindLAPACK.cmake
new file mode 100644
index 0000000..a6bf89f
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindLAPACK.cmake
@@ -0,0 +1,377 @@
+#.rst:
+# FindLAPACK
+# ----------
+#
+# Find LAPACK library
+#
+# This module finds an installed fortran library that implements the
+# LAPACK linear-algebra interface (see http://www.netlib.org/lapack/).
+#
+# The approach follows that taken for the autoconf macro file,
+# acx_lapack.m4 (distributed at
+# http://ac-archive.sourceforge.net/ac-archive/acx_lapack.html).
+#
+# This module sets the following variables:
+#
+# ::
+#
+#   LAPACK_FOUND - set to true if a library implementing the LAPACK interface
+#     is found
+#   LAPACK_LINKER_FLAGS - uncached list of required linker flags (excluding -l
+#     and -L).
+#   LAPACK_LIBRARIES - uncached list of libraries (using full path name) to
+#     link against to use LAPACK
+#   LAPACK95_LIBRARIES - uncached list of libraries (using full path name) to
+#     link against to use LAPACK95
+#   LAPACK95_FOUND - set to true if a library implementing the LAPACK f95
+#     interface is found
+#   BLA_STATIC  if set on this determines what kind of linkage we do (static)
+#   BLA_VENDOR  if set checks only the specified vendor, if not set checks
+#      all the possibilities
+#   BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
+#
+# ## List of vendors (BLA_VENDOR) valid in this module # Intel(mkl),
+# OpenBLAS, ACML,Apple, NAS, Generic
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(_lapack_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
+
+# Check the language being used
+if( NOT (CMAKE_C_COMPILER_LOADED OR CMAKE_CXX_COMPILER_LOADED OR CMAKE_Fortran_COMPILER_LOADED) )
+  if(LAPACK_FIND_REQUIRED)
+    message(FATAL_ERROR "FindLAPACK requires Fortran, C, or C++ to be enabled.")
+  else()
+    message(STATUS "Looking for LAPACK... - NOT found (Unsupported languages)")
+    return()
+  endif()
+endif()
+
+if (CMAKE_Fortran_COMPILER_LOADED)
+include(${CMAKE_CURRENT_LIST_DIR}/CheckFortranFunctionExists.cmake)
+else ()
+include(${CMAKE_CURRENT_LIST_DIR}/CheckFunctionExists.cmake)
+endif ()
+include(${CMAKE_CURRENT_LIST_DIR}/CMakePushCheckState.cmake)
+
+cmake_push_check_state()
+set(CMAKE_REQUIRED_QUIET ${LAPACK_FIND_QUIETLY})
+
+set(LAPACK_FOUND FALSE)
+set(LAPACK95_FOUND FALSE)
+
+# TODO: move this stuff to separate module
+
+macro(Check_Lapack_Libraries LIBRARIES _prefix _name _flags _list _blas _threads)
+# This macro checks for the existence of the combination of fortran libraries
+# given by _list.  If the combination is found, this macro checks (using the
+# Check_Fortran_Function_Exists macro) whether can link against that library
+# combination using the name of a routine given by _name using the linker
+# flags given by _flags.  If the combination of libraries is found and passes
+# the link test, LIBRARIES is set to the list of complete library paths that
+# have been found.  Otherwise, LIBRARIES is set to FALSE.
+
+# N.B. _prefix is the prefix applied to the names of all cached variables that
+# are generated internally and marked advanced by this macro.
+
+set(_libraries_work TRUE)
+set(${LIBRARIES})
+set(_combined_name)
+if (NOT _libdir)
+  if (WIN32)
+    set(_libdir ENV LIB)
+  elseif (APPLE)
+    set(_libdir ENV DYLD_LIBRARY_PATH)
+  else ()
+    set(_libdir ENV LD_LIBRARY_PATH)
+  endif ()
+endif ()
+foreach(_library ${_list})
+  set(_combined_name ${_combined_name}_${_library})
+
+  if(_libraries_work)
+    if (BLA_STATIC)
+      if (WIN32)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif ()
+      if (APPLE)
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .lib ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      else ()
+        set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
+      endif ()
+    else ()
+			if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
+        # for ubuntu's libblas3gf and liblapack3gf packages
+        set(CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES} .so.3gf)
+      endif ()
+    endif ()
+    find_library(${_prefix}_${_library}_LIBRARY
+      NAMES ${_library}
+      PATHS ${_libdir}
+      )
+    mark_as_advanced(${_prefix}_${_library}_LIBRARY)
+    set(${LIBRARIES} ${${LIBRARIES}} ${${_prefix}_${_library}_LIBRARY})
+    set(_libraries_work ${${_prefix}_${_library}_LIBRARY})
+  endif()
+endforeach()
+
+if(_libraries_work)
+  # Test this combination of libraries.
+  if(UNIX AND BLA_STATIC)
+    set(CMAKE_REQUIRED_LIBRARIES ${_flags} "-Wl,--start-group" ${${LIBRARIES}} ${_blas} "-Wl,--end-group" ${_threads})
+  else()
+    set(CMAKE_REQUIRED_LIBRARIES ${_flags} ${${LIBRARIES}} ${_blas} ${_threads})
+  endif()
+#  message("DEBUG: CMAKE_REQUIRED_LIBRARIES = ${CMAKE_REQUIRED_LIBRARIES}")
+  if (NOT CMAKE_Fortran_COMPILER_LOADED)
+    check_function_exists("${_name}_" ${_prefix}${_combined_name}_WORKS)
+  else ()
+    check_fortran_function_exists(${_name} ${_prefix}${_combined_name}_WORKS)
+  endif ()
+  set(CMAKE_REQUIRED_LIBRARIES)
+  mark_as_advanced(${_prefix}${_combined_name}_WORKS)
+  set(_libraries_work ${${_prefix}${_combined_name}_WORKS})
+  #message("DEBUG: ${LIBRARIES} = ${${LIBRARIES}}")
+endif()
+
+ if(_libraries_work)
+   set(${LIBRARIES} ${${LIBRARIES}} ${_blas} ${_threads})
+ else()
+    set(${LIBRARIES} FALSE)
+ endif()
+
+endmacro()
+
+
+set(LAPACK_LINKER_FLAGS)
+set(LAPACK_LIBRARIES)
+set(LAPACK95_LIBRARIES)
+
+
+if(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+  find_package(BLAS)
+else()
+  find_package(BLAS REQUIRED)
+endif()
+
+
+if(BLAS_FOUND)
+  set(LAPACK_LINKER_FLAGS ${BLAS_LINKER_FLAGS})
+  if (NOT $ENV{BLA_VENDOR} STREQUAL "")
+    set(BLA_VENDOR $ENV{BLA_VENDOR})
+  else ()
+    if(NOT BLA_VENDOR)
+      set(BLA_VENDOR "All")
+    endif()
+  endif ()
+
+if (BLA_VENDOR STREQUAL "Goto" OR BLA_VENDOR STREQUAL "All")
+ if(NOT LAPACK_LIBRARIES)
+  check_lapack_libraries(
+  LAPACK_LIBRARIES
+  LAPACK
+  cheev
+  ""
+  "goto2"
+  "${BLAS_LIBRARIES}"
+  ""
+  )
+ endif()
+endif ()
+
+if (BLA_VENDOR STREQUAL "OpenBLAS" OR BLA_VENDOR STREQUAL "All")
+ if(NOT LAPACK_LIBRARIES)
+  check_lapack_libraries(
+  LAPACK_LIBRARIES
+  LAPACK
+  cheev
+  ""
+  "openblas"
+  "${BLAS_LIBRARIES}"
+  ""
+  )
+ endif()
+endif ()
+
+#acml lapack
+ if (BLA_VENDOR MATCHES "ACML" OR BLA_VENDOR STREQUAL "All")
+   if (BLAS_LIBRARIES MATCHES ".+acml.+")
+     set (LAPACK_LIBRARIES ${BLAS_LIBRARIES})
+   endif ()
+ endif ()
+
+# Apple LAPACK library?
+if (BLA_VENDOR STREQUAL "Apple" OR BLA_VENDOR STREQUAL "All")
+ if(NOT LAPACK_LIBRARIES)
+  check_lapack_libraries(
+  LAPACK_LIBRARIES
+  LAPACK
+  cheev
+  ""
+  "Accelerate"
+  "${BLAS_LIBRARIES}"
+  ""
+  )
+ endif()
+endif ()
+if (BLA_VENDOR STREQUAL "NAS" OR BLA_VENDOR STREQUAL "All")
+  if ( NOT LAPACK_LIBRARIES )
+    check_lapack_libraries(
+    LAPACK_LIBRARIES
+    LAPACK
+    cheev
+    ""
+    "vecLib"
+    "${BLAS_LIBRARIES}"
+    ""
+    )
+  endif ()
+endif ()
+# Generic LAPACK library?
+if (BLA_VENDOR STREQUAL "Generic" OR
+    BLA_VENDOR STREQUAL "ATLAS" OR
+    BLA_VENDOR STREQUAL "All")
+  if ( NOT LAPACK_LIBRARIES )
+    check_lapack_libraries(
+    LAPACK_LIBRARIES
+    LAPACK
+    cheev
+    ""
+    "lapack"
+    "${BLAS_LIBRARIES}"
+    ""
+    )
+  endif ()
+endif ()
+#intel lapack
+if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All")
+  if (NOT WIN32)
+    set(LM "-lm")
+  endif ()
+  if (CMAKE_C_COMPILER_LOADED OR CMAKE_CXX_COMPILER_LOADED)
+    if(LAPACK_FIND_QUIETLY OR NOT LAPACK_FIND_REQUIRED)
+      find_PACKAGE(Threads)
+    else()
+      find_package(Threads REQUIRED)
+    endif()
+
+    set(LAPACK_SEARCH_LIBS "")
+
+    if (BLA_F95)
+      set(LAPACK_mkl_SEARCH_SYMBOL "CHEEV")
+      set(_LIBRARIES LAPACK95_LIBRARIES)
+      set(_BLAS_LIBRARIES ${BLAS95_LIBRARIES})
+
+      # old
+      list(APPEND LAPACK_SEARCH_LIBS
+        "mkl_lapack95")
+      # new >= 10.3
+      list(APPEND LAPACK_SEARCH_LIBS
+        "mkl_intel_c")
+      list(APPEND LAPACK_SEARCH_LIBS
+        "mkl_intel_lp64")
+    else()
+      set(LAPACK_mkl_SEARCH_SYMBOL "cheev")
+      set(_LIBRARIES LAPACK_LIBRARIES)
+      set(_BLAS_LIBRARIES ${BLAS_LIBRARIES})
+
+      # old
+      list(APPEND LAPACK_SEARCH_LIBS
+        "mkl_lapack")
+      # new >= 10.3
+      list(APPEND LAPACK_SEARCH_LIBS
+        "mkl_gf_lp64")
+    endif()
+
+    # First try empty lapack libs
+    if (NOT ${_LIBRARIES})
+      check_lapack_libraries(
+        ${_LIBRARIES}
+        BLAS
+        ${LAPACK_mkl_SEARCH_SYMBOL}
+        ""
+        ""
+        "${_BLAS_LIBRARIES}"
+        "${CMAKE_THREAD_LIBS_INIT};${LM}"
+        )
+    endif ()
+    # Then try the search libs
+    foreach (IT ${LAPACK_SEARCH_LIBS})
+      if (NOT ${_LIBRARIES})
+        check_lapack_libraries(
+          ${_LIBRARIES}
+          BLAS
+          ${LAPACK_mkl_SEARCH_SYMBOL}
+          ""
+          "${IT}"
+          "${_BLAS_LIBRARIES}"
+          "${CMAKE_THREAD_LIBS_INIT};${LM}"
+          )
+      endif ()
+    endforeach ()
+  endif ()
+endif()
+else()
+  message(STATUS "LAPACK requires BLAS")
+endif()
+
+if(BLA_F95)
+ if(LAPACK95_LIBRARIES)
+  set(LAPACK95_FOUND TRUE)
+ else()
+  set(LAPACK95_FOUND FALSE)
+ endif()
+ if(NOT LAPACK_FIND_QUIETLY)
+  if(LAPACK95_FOUND)
+    message(STATUS "A library with LAPACK95 API found.")
+  else()
+    if(LAPACK_FIND_REQUIRED)
+      message(FATAL_ERROR
+      "A required library with LAPACK95 API not found. Please specify library location."
+      )
+    else()
+      message(STATUS
+      "A library with LAPACK95 API not found. Please specify library location."
+      )
+    endif()
+  endif()
+ endif()
+ set(LAPACK_FOUND "${LAPACK95_FOUND}")
+ set(LAPACK_LIBRARIES "${LAPACK95_LIBRARIES}")
+else()
+ if(LAPACK_LIBRARIES)
+  set(LAPACK_FOUND TRUE)
+ else()
+  set(LAPACK_FOUND FALSE)
+ endif()
+
+ if(NOT LAPACK_FIND_QUIETLY)
+  if(LAPACK_FOUND)
+    message(STATUS "A library with LAPACK API found.")
+  else()
+    if(LAPACK_FIND_REQUIRED)
+      message(FATAL_ERROR
+      "A required library with LAPACK API not found. Please specify library location."
+      )
+    else()
+      message(STATUS
+      "A library with LAPACK API not found. Please specify library location."
+      )
+    endif()
+  endif()
+ endif()
+endif()
+
+cmake_pop_check_state()
+set(CMAKE_FIND_LIBRARY_SUFFIXES ${_lapack_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
diff --git a/share/cmake-3.2/Modules/FindLATEX.cmake b/share/cmake-3.6/Modules/FindLATEX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindLATEX.cmake
rename to share/cmake-3.6/Modules/FindLATEX.cmake
diff --git a/share/cmake-3.6/Modules/FindLTTngUST.cmake b/share/cmake-3.6/Modules/FindLTTngUST.cmake
new file mode 100644
index 0000000..e3220ac
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindLTTngUST.cmake
@@ -0,0 +1,111 @@
+#.rst:
+# FindLTTngUST
+# ------------
+#
+# This module finds the `LTTng-UST <http://lttng.org/>`__ library.
+#
+# Imported target
+# ^^^^^^^^^^^^^^^
+#
+# This module defines the following :prop_tgt:`IMPORTED` target:
+#
+# ``LTTng::UST``
+#   The LTTng-UST library, if found
+#
+# Result variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module sets the following
+#
+# ``LTTNGUST_FOUND``
+#   ``TRUE`` if system has LTTng-UST
+# ``LTTNGUST_INCLUDE_DIRS``
+#   The LTTng-UST include directories
+# ``LTTNGUST_LIBRARIES``
+#   The libraries needed to use LTTng-UST
+# ``LTTNGUST_VERSION_STRING``
+#   The LTTng-UST version
+# ``LTTNGUST_HAS_TRACEF``
+#   ``TRUE`` if the ``tracef()`` API is available in the system's LTTng-UST
+# ``LTTNGUST_HAS_TRACELOG``
+#   ``TRUE`` if the ``tracelog()`` API is available in the system's LTTng-UST
+
+#=============================================================================
+# Copyright 2016 Kitware, Inc.
+# Copyright 2016 Philippe Proulx <pproulx@efficios.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_path(LTTNGUST_INCLUDE_DIRS NAMES lttng/tracepoint.h)
+find_library(LTTNGUST_LIBRARIES NAMES lttng-ust)
+
+if(LTTNGUST_INCLUDE_DIRS AND LTTNGUST_LIBRARIES)
+  # find tracef() and tracelog() support
+  set(LTTNGUST_HAS_TRACEF 0)
+  set(LTTNGUST_HAS_TRACELOG 0)
+
+  if(EXISTS "${LTTNGUST_INCLUDE_DIRS}/lttng/tracef.h")
+    set(LTTNGUST_HAS_TRACEF TRUE)
+  endif()
+
+  if(EXISTS "${LTTNGUST_INCLUDE_DIRS}/lttng/tracelog.h")
+    set(LTTNGUST_HAS_TRACELOG TRUE)
+  endif()
+
+  # get version
+  set(lttngust_version_file "${LTTNGUST_INCLUDE_DIRS}/lttng/ust-version.h")
+
+  if(EXISTS "${lttngust_version_file}")
+    file(STRINGS "${lttngust_version_file}" lttngust_version_major_string
+         REGEX "^[\t ]*#define[\t ]+LTTNG_UST_MAJOR_VERSION[\t ]+[0-9]+[\t ]*$")
+    file(STRINGS "${lttngust_version_file}" lttngust_version_minor_string
+         REGEX "^[\t ]*#define[\t ]+LTTNG_UST_MINOR_VERSION[\t ]+[0-9]+[\t ]*$")
+    file(STRINGS "${lttngust_version_file}" lttngust_version_patch_string
+         REGEX "^[\t ]*#define[\t ]+LTTNG_UST_PATCHLEVEL_VERSION[\t ]+[0-9]+[\t ]*$")
+    string(REGEX REPLACE ".*([0-9]+).*" "\\1"
+           lttngust_v_major "${lttngust_version_major_string}")
+    string(REGEX REPLACE ".*([0-9]+).*" "\\1"
+           lttngust_v_minor "${lttngust_version_minor_string}")
+    string(REGEX REPLACE ".*([0-9]+).*" "\\1"
+           lttngust_v_patch "${lttngust_version_patch_string}")
+    set(LTTNGUST_VERSION_STRING
+        "${lttngust_v_major}.${lttngust_v_minor}.${lttngust_v_patch}")
+    unset(lttngust_version_major_string)
+    unset(lttngust_version_minor_string)
+    unset(lttngust_version_patch_string)
+    unset(lttngust_v_major)
+    unset(lttngust_v_minor)
+    unset(lttngust_v_patch)
+  endif()
+
+  unset(lttngust_version_file)
+
+  if(NOT TARGET LTTng::UST)
+    add_library(LTTng::UST UNKNOWN IMPORTED)
+    set_target_properties(LTTng::UST PROPERTIES
+      INTERFACE_INCLUDE_DIRECTORIES "${LTTNGUST_INCLUDE_DIRS}"
+      INTERFACE_LINK_LIBRARIES ${CMAKE_DL_LIBS}
+      IMPORTED_LINK_INTERFACE_LANGUAGES "C"
+      IMPORTED_LOCATION "${LTTNGUST_LIBRARIES}")
+  endif()
+
+  # add libdl to required libraries
+  set(LTTNGUST_LIBRARIES ${LTTNGUST_LIBRARIES} ${CMAKE_DL_LIBS})
+endif()
+
+# handle the QUIETLY and REQUIRED arguments and set LTTNGUST_FOUND to
+# TRUE if all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(LTTngUST FOUND_VAR LTTNGUST_FOUND
+                                  REQUIRED_VARS LTTNGUST_LIBRARIES
+                                                LTTNGUST_INCLUDE_DIRS
+                                  VERSION_VAR LTTNGUST_VERSION_STRING)
+mark_as_advanced(LTTNGUST_LIBRARIES LTTNGUST_INCLUDE_DIRS)
diff --git a/share/cmake-3.6/Modules/FindLibArchive.cmake b/share/cmake-3.6/Modules/FindLibArchive.cmake
new file mode 100644
index 0000000..dd93041
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindLibArchive.cmake
@@ -0,0 +1,75 @@
+#.rst:
+# FindLibArchive
+# --------------
+#
+# Find libarchive library and headers
+#
+# The module defines the following variables:
+#
+# ::
+#
+#   LibArchive_FOUND        - true if libarchive was found
+#   LibArchive_INCLUDE_DIRS - include search path
+#   LibArchive_LIBRARIES    - libraries to link
+#   LibArchive_VERSION      - libarchive 3-component version number
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_path(LibArchive_INCLUDE_DIR
+  NAMES archive.h
+  PATHS
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\LibArchive;InstallPath]/include"
+  )
+
+find_library(LibArchive_LIBRARY
+  NAMES archive libarchive
+  PATHS
+  "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\LibArchive;InstallPath]/lib"
+  )
+
+mark_as_advanced(LibArchive_INCLUDE_DIR LibArchive_LIBRARY)
+
+# Extract the version number from the header.
+if(LibArchive_INCLUDE_DIR AND EXISTS "${LibArchive_INCLUDE_DIR}/archive.h")
+  # The version string appears in one of three known formats in the header:
+  #  #define ARCHIVE_LIBRARY_VERSION "libarchive 2.4.12"
+  #  #define ARCHIVE_VERSION_STRING "libarchive 2.8.4"
+  #  #define ARCHIVE_VERSION_ONLY_STRING "3.2.0"
+  # Match any format.
+  set(_LibArchive_VERSION_REGEX "^#define[ \t]+ARCHIVE[_A-Z]+VERSION[_A-Z]*[ \t]+\"(libarchive +)?([0-9]+)\\.([0-9]+)\\.([0-9]+)[^\"]*\".*$")
+  file(STRINGS "${LibArchive_INCLUDE_DIR}/archive.h" _LibArchive_VERSION_STRING LIMIT_COUNT 1 REGEX "${_LibArchive_VERSION_REGEX}")
+  if(_LibArchive_VERSION_STRING)
+    string(REGEX REPLACE "${_LibArchive_VERSION_REGEX}" "\\2.\\3.\\4" LibArchive_VERSION "${_LibArchive_VERSION_STRING}")
+  endif()
+  unset(_LibArchive_VERSION_REGEX)
+  unset(_LibArchive_VERSION_STRING)
+endif()
+
+# Handle the QUIETLY and REQUIRED arguments and set LIBARCHIVE_FOUND
+# to TRUE if all listed variables are TRUE.
+# (Use ${CMAKE_ROOT}/Modules instead of ${CMAKE_CURRENT_LIST_DIR} because CMake
+#  itself includes this FindLibArchive when built with an older CMake that does
+#  not provide it.  The older CMake also does not have CMAKE_CURRENT_LIST_DIR.)
+include(${CMAKE_ROOT}/Modules/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(LibArchive
+                                  REQUIRED_VARS LibArchive_LIBRARY LibArchive_INCLUDE_DIR
+                                  VERSION_VAR LibArchive_VERSION
+  )
+set(LibArchive_FOUND ${LIBARCHIVE_FOUND})
+unset(LIBARCHIVE_FOUND)
+
+if(LibArchive_FOUND)
+  set(LibArchive_INCLUDE_DIRS ${LibArchive_INCLUDE_DIR})
+  set(LibArchive_LIBRARIES    ${LibArchive_LIBRARY})
+endif()
diff --git a/share/cmake-3.2/Modules/FindLibLZMA.cmake b/share/cmake-3.6/Modules/FindLibLZMA.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindLibLZMA.cmake
rename to share/cmake-3.6/Modules/FindLibLZMA.cmake
diff --git a/share/cmake-3.2/Modules/FindLibXml2.cmake b/share/cmake-3.6/Modules/FindLibXml2.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindLibXml2.cmake
rename to share/cmake-3.6/Modules/FindLibXml2.cmake
diff --git a/share/cmake-3.2/Modules/FindLibXslt.cmake b/share/cmake-3.6/Modules/FindLibXslt.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindLibXslt.cmake
rename to share/cmake-3.6/Modules/FindLibXslt.cmake
diff --git a/share/cmake-3.6/Modules/FindLua.cmake b/share/cmake-3.6/Modules/FindLua.cmake
new file mode 100644
index 0000000..4e00a92
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindLua.cmake
@@ -0,0 +1,172 @@
+#.rst:
+# FindLua
+# -------
+#
+#
+#
+# Locate Lua library This module defines
+#
+# ::
+#
+#   LUA_FOUND          - if false, do not try to link to Lua
+#   LUA_LIBRARIES      - both lua and lualib
+#   LUA_INCLUDE_DIR    - where to find lua.h
+#   LUA_VERSION_STRING - the version of Lua found
+#   LUA_VERSION_MAJOR  - the major version of Lua
+#   LUA_VERSION_MINOR  - the minor version of Lua
+#   LUA_VERSION_PATCH  - the patch version of Lua
+#
+#
+#
+# Note that the expected include convention is
+#
+# ::
+#
+#   #include "lua.h"
+#
+# and not
+#
+# ::
+#
+#   #include <lua/lua.h>
+#
+# This is because, the lua location is not standardized and may exist in
+# locations other than lua/
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+# Copyright 2013 Rolf Eike Beer <eike@sf-mail.de>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+unset(_lua_include_subdirs)
+unset(_lua_library_names)
+
+# this is a function only to have all the variables inside go away automatically
+function(set_lua_version_vars)
+    set(LUA_VERSIONS5 5.3 5.2 5.1 5.0)
+
+    if (Lua_FIND_VERSION_EXACT)
+        if (Lua_FIND_VERSION_COUNT GREATER 1)
+            set(lua_append_versions ${Lua_FIND_VERSION_MAJOR}.${Lua_FIND_VERSION_MINOR})
+        endif ()
+    elseif (Lua_FIND_VERSION)
+        # once there is a different major version supported this should become a loop
+        if (NOT Lua_FIND_VERSION_MAJOR GREATER 5)
+            if (Lua_FIND_VERSION_COUNT EQUAL 1)
+                set(lua_append_versions ${LUA_VERSIONS5})
+            else ()
+                foreach (subver IN LISTS LUA_VERSIONS5)
+                    if (NOT subver VERSION_LESS ${Lua_FIND_VERSION})
+                        list(APPEND lua_append_versions ${subver})
+                    endif ()
+                endforeach ()
+            endif ()
+        endif ()
+    else ()
+        # once there is a different major version supported this should become a loop
+        set(lua_append_versions ${LUA_VERSIONS5})
+    endif ()
+
+    foreach (ver IN LISTS lua_append_versions)
+        string(REGEX MATCH "^([0-9]+)\\.([0-9]+)$" _ver "${ver}")
+        list(APPEND _lua_include_subdirs
+             include/lua${CMAKE_MATCH_1}${CMAKE_MATCH_2}
+             include/lua${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
+             include/lua-${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
+        )
+        list(APPEND _lua_library_names
+             lua${CMAKE_MATCH_1}${CMAKE_MATCH_2}
+             lua${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
+             lua-${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
+             lua.${CMAKE_MATCH_1}.${CMAKE_MATCH_2}
+        )
+    endforeach ()
+
+    set(_lua_include_subdirs "${_lua_include_subdirs}" PARENT_SCOPE)
+    set(_lua_library_names "${_lua_library_names}" PARENT_SCOPE)
+endfunction(set_lua_version_vars)
+
+set_lua_version_vars()
+
+find_path(LUA_INCLUDE_DIR lua.h
+  HINTS
+    ENV LUA_DIR
+  PATH_SUFFIXES ${_lua_include_subdirs} include/lua include
+  PATHS
+  ~/Library/Frameworks
+  /Library/Frameworks
+  /sw # Fink
+  /opt/local # DarwinPorts
+  /opt/csw # Blastwave
+  /opt
+)
+unset(_lua_include_subdirs)
+
+find_library(LUA_LIBRARY
+  NAMES ${_lua_library_names} lua
+  HINTS
+    ENV LUA_DIR
+  PATH_SUFFIXES lib
+  PATHS
+  ~/Library/Frameworks
+  /Library/Frameworks
+  /sw
+  /opt/local
+  /opt/csw
+  /opt
+)
+unset(_lua_library_names)
+
+if (LUA_LIBRARY)
+    # include the math library for Unix
+    if (UNIX AND NOT APPLE AND NOT BEOS)
+        find_library(LUA_MATH_LIBRARY m)
+        set(LUA_LIBRARIES "${LUA_LIBRARY};${LUA_MATH_LIBRARY}")
+    # For Windows and Mac, don't need to explicitly include the math library
+    else ()
+        set(LUA_LIBRARIES "${LUA_LIBRARY}")
+    endif ()
+endif ()
+
+if (LUA_INCLUDE_DIR AND EXISTS "${LUA_INCLUDE_DIR}/lua.h")
+    # At least 5.[012] have different ways to express the version
+    # so all of them need to be tested. Lua 5.2 defines LUA_VERSION
+    # and LUA_RELEASE as joined by the C preprocessor, so avoid those.
+    file(STRINGS "${LUA_INCLUDE_DIR}/lua.h" lua_version_strings
+         REGEX "^#define[ \t]+LUA_(RELEASE[ \t]+\"Lua [0-9]|VERSION([ \t]+\"Lua [0-9]|_[MR])).*")
+
+    string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION_MAJOR[ \t]+\"([0-9])\"[ \t]*;.*" "\\1" LUA_VERSION_MAJOR ";${lua_version_strings};")
+    if (LUA_VERSION_MAJOR MATCHES "^[0-9]+$")
+        string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION_MINOR[ \t]+\"([0-9])\"[ \t]*;.*" "\\1" LUA_VERSION_MINOR ";${lua_version_strings};")
+        string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION_RELEASE[ \t]+\"([0-9])\"[ \t]*;.*" "\\1" LUA_VERSION_PATCH ";${lua_version_strings};")
+        set(LUA_VERSION_STRING "${LUA_VERSION_MAJOR}.${LUA_VERSION_MINOR}.${LUA_VERSION_PATCH}")
+    else ()
+        string(REGEX REPLACE ".*;#define[ \t]+LUA_RELEASE[ \t]+\"Lua ([0-9.]+)\"[ \t]*;.*" "\\1" LUA_VERSION_STRING ";${lua_version_strings};")
+        if (NOT LUA_VERSION_STRING MATCHES "^[0-9.]+$")
+            string(REGEX REPLACE ".*;#define[ \t]+LUA_VERSION[ \t]+\"Lua ([0-9.]+)\"[ \t]*;.*" "\\1" LUA_VERSION_STRING ";${lua_version_strings};")
+        endif ()
+        string(REGEX REPLACE "^([0-9]+)\\.[0-9.]*$" "\\1" LUA_VERSION_MAJOR "${LUA_VERSION_STRING}")
+        string(REGEX REPLACE "^[0-9]+\\.([0-9]+)[0-9.]*$" "\\1" LUA_VERSION_MINOR "${LUA_VERSION_STRING}")
+        string(REGEX REPLACE "^[0-9]+\\.[0-9]+\\.([0-9]).*" "\\1" LUA_VERSION_PATCH "${LUA_VERSION_STRING}")
+    endif ()
+
+    unset(lua_version_strings)
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+# handle the QUIETLY and REQUIRED arguments and set LUA_FOUND to TRUE if
+# all listed variables are TRUE
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(Lua
+                                  REQUIRED_VARS LUA_LIBRARIES LUA_INCLUDE_DIR
+                                  VERSION_VAR LUA_VERSION_STRING)
+
+mark_as_advanced(LUA_INCLUDE_DIR LUA_LIBRARY LUA_MATH_LIBRARY)
diff --git a/share/cmake-3.2/Modules/FindLua50.cmake b/share/cmake-3.6/Modules/FindLua50.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindLua50.cmake
rename to share/cmake-3.6/Modules/FindLua50.cmake
diff --git a/share/cmake-3.2/Modules/FindLua51.cmake b/share/cmake-3.6/Modules/FindLua51.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindLua51.cmake
rename to share/cmake-3.6/Modules/FindLua51.cmake
diff --git a/share/cmake-3.2/Modules/FindMFC.cmake b/share/cmake-3.6/Modules/FindMFC.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindMFC.cmake
rename to share/cmake-3.6/Modules/FindMFC.cmake
diff --git a/share/cmake-3.2/Modules/FindMPEG.cmake b/share/cmake-3.6/Modules/FindMPEG.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindMPEG.cmake
rename to share/cmake-3.6/Modules/FindMPEG.cmake
diff --git a/share/cmake-3.2/Modules/FindMPEG2.cmake b/share/cmake-3.6/Modules/FindMPEG2.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindMPEG2.cmake
rename to share/cmake-3.6/Modules/FindMPEG2.cmake
diff --git a/share/cmake-3.6/Modules/FindMPI.cmake b/share/cmake-3.6/Modules/FindMPI.cmake
new file mode 100644
index 0000000..fbc6795
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindMPI.cmake
@@ -0,0 +1,677 @@
+#.rst:
+# FindMPI
+# -------
+#
+# Find a Message Passing Interface (MPI) implementation
+#
+# The Message Passing Interface (MPI) is a library used to write
+# high-performance distributed-memory parallel applications, and is
+# typically deployed on a cluster.  MPI is a standard interface (defined
+# by the MPI forum) for which many implementations are available.  All
+# of them have somewhat different include paths, libraries to link
+# against, etc., and this module tries to smooth out those differences.
+#
+# Variables
+# ^^^^^^^^^
+#
+# This module will set the following variables per language in your
+# project, where <lang> is one of C, CXX, or Fortran:
+#
+# ::
+#
+#    MPI_<lang>_FOUND           TRUE if FindMPI found MPI flags for <lang>
+#    MPI_<lang>_COMPILER        MPI Compiler wrapper for <lang>
+#    MPI_<lang>_COMPILE_FLAGS   Compilation flags for MPI programs
+#    MPI_<lang>_INCLUDE_PATH    Include path(s) for MPI header
+#    MPI_<lang>_LINK_FLAGS      Linking flags for MPI programs
+#    MPI_<lang>_LIBRARIES       All libraries to link MPI programs against
+#
+# Additionally, FindMPI sets the following variables for running MPI
+# programs from the command line:
+#
+# ::
+#
+#    MPIEXEC                    Executable for running MPI programs
+#    MPIEXEC_NUMPROC_FLAG       Flag to pass to MPIEXEC before giving
+#                               it the number of processors to run on
+#    MPIEXEC_PREFLAGS           Flags to pass to MPIEXEC directly
+#                               before the executable to run.
+#    MPIEXEC_POSTFLAGS          Flags to pass to MPIEXEC after other flags
+#
+# Usage
+# ^^^^^
+#
+# To use this module, simply call FindMPI from a CMakeLists.txt file, or
+# run ``find_package(MPI)``, then run CMake.  If you are happy with the
+# auto-detected configuration for your language, then you're done.  If
+# not, you have two options:
+#
+# ::
+#
+#    1. Set MPI_<lang>_COMPILER to the MPI wrapper (mpicc, etc.) of your
+#       choice and reconfigure.  FindMPI will attempt to determine all the
+#       necessary variables using THAT compiler's compile and link flags.
+#    2. If this fails, or if your MPI implementation does not come with
+#       a compiler wrapper, then set both MPI_<lang>_LIBRARIES and
+#       MPI_<lang>_INCLUDE_PATH.  You may also set any other variables
+#       listed above, but these two are required.  This will circumvent
+#       autodetection entirely.
+#
+# When configuration is successful, ``MPI_<lang>_COMPILER`` will be set to
+# the compiler wrapper for <lang>, if it was found.  ``MPI_<lang>_FOUND``
+# and other variables above will be set if any MPI implementation was
+# found for <lang>, regardless of whether a compiler was found.
+#
+# When using ``MPIEXEC`` to execute MPI applications, you should typically
+# use all of the ``MPIEXEC`` flags as follows:
+#
+# ::
+#
+#    ${MPIEXEC} ${MPIEXEC_NUMPROC_FLAG} PROCS
+#      ${MPIEXEC_PREFLAGS} EXECUTABLE ${MPIEXEC_POSTFLAGS} ARGS
+#
+# where ``PROCS`` is the number of processors on which to execute the
+# program, ``EXECUTABLE`` is the MPI program, and ``ARGS`` are the arguments to
+# pass to the MPI program.
+#
+# Backward Compatibility
+# ^^^^^^^^^^^^^^^^^^^^^^
+#
+# For backward compatibility with older versions of FindMPI, these
+# variables are set, but deprecated:
+#
+# ::
+#
+#    MPI_FOUND           MPI_COMPILER        MPI_LIBRARY
+#    MPI_COMPILE_FLAGS   MPI_INCLUDE_PATH    MPI_EXTRA_LIBRARY
+#    MPI_LINK_FLAGS      MPI_LIBRARIES
+#
+# In new projects, please use the ``MPI_<lang>_XXX`` equivalents.
+
+#=============================================================================
+# Copyright 2001-2011 Kitware, Inc.
+# Copyright 2010-2011 Todd Gamblin tgamblin@llnl.gov
+# Copyright 2001-2009 Dave Partyka
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# include this to handle the QUIETLY and REQUIRED arguments
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+#
+# This part detects MPI compilers, attempting to wade through the mess of compiler names in
+# a sensible way.
+#
+# The compilers are detected in this order:
+#
+# 1. Try to find the most generic available MPI compiler, as this is usually set up by
+#    cluster admins.  e.g., if plain old mpicc is available, we'll use it and assume it's
+#    the right compiler.
+#
+# 2. If a generic mpicc is NOT found, then we attempt to find one that matches
+#    CMAKE_<lang>_COMPILER_ID. e.g. if you are using XL compilers, we'll try to find mpixlc
+#    and company, but not mpiicc.  This hopefully prevents toolchain mismatches.
+#
+# If you want to force a particular MPI compiler other than what we autodetect (e.g. if you
+# want to compile regular stuff with GNU and parallel stuff with Intel), you can always set
+# your favorite MPI_<lang>_COMPILER explicitly and this stuff will be ignored.
+#
+
+# Start out with the generic MPI compiler names, as these are most commonly used.
+set(_MPI_C_COMPILER_NAMES                  mpicc    mpcc      mpicc_r mpcc_r)
+set(_MPI_CXX_COMPILER_NAMES                mpicxx   mpiCC     mpcxx   mpCC    mpic++   mpc++
+                                           mpicxx_r mpiCC_r   mpcxx_r mpCC_r  mpic++_r mpc++_r)
+set(_MPI_Fortran_COMPILER_NAMES            mpif95   mpif95_r  mpf95   mpf95_r
+                                           mpif90   mpif90_r  mpf90   mpf90_r
+                                           mpif77   mpif77_r  mpf77   mpf77_r)
+
+# GNU compiler names
+set(_MPI_GNU_C_COMPILER_NAMES              mpigcc mpgcc mpigcc_r mpgcc_r)
+set(_MPI_GNU_CXX_COMPILER_NAMES            mpig++ mpg++ mpig++_r mpg++_r)
+set(_MPI_GNU_Fortran_COMPILER_NAMES        mpigfortran mpgfortran mpigfortran_r mpgfortran_r
+                                           mpig77 mpig77_r mpg77 mpg77_r)
+
+# Intel MPI compiler names
+set(_MPI_Intel_C_COMPILER_NAMES            mpiicc)
+set(_MPI_Intel_CXX_COMPILER_NAMES          mpiicpc  mpiicxx mpiic++ mpiiCC)
+set(_MPI_Intel_Fortran_COMPILER_NAMES      mpiifort mpiif95 mpiif90 mpiif77)
+
+# PGI compiler names
+set(_MPI_PGI_C_COMPILER_NAMES              mpipgcc mppgcc)
+set(_MPI_PGI_CXX_COMPILER_NAMES            mpipgCC mppgCC)
+set(_MPI_PGI_Fortran_COMPILER_NAMES        mpipgf95 mpipgf90 mppgf95 mppgf90 mpipgf77 mppgf77)
+
+# XLC MPI Compiler names
+set(_MPI_XL_C_COMPILER_NAMES               mpxlc      mpxlc_r    mpixlc     mpixlc_r)
+set(_MPI_XL_CXX_COMPILER_NAMES             mpixlcxx   mpixlC     mpixlc++   mpxlcxx   mpxlc++   mpixlc++   mpxlCC
+                                           mpixlcxx_r mpixlC_r   mpixlc++_r mpxlcxx_r mpxlc++_r mpixlc++_r mpxlCC_r)
+set(_MPI_XL_Fortran_COMPILER_NAMES         mpixlf95   mpixlf95_r mpxlf95 mpxlf95_r
+                                           mpixlf90   mpixlf90_r mpxlf90 mpxlf90_r
+                                           mpixlf77   mpixlf77_r mpxlf77 mpxlf77_r
+                                           mpixlf     mpixlf_r   mpxlf   mpxlf_r)
+
+# append vendor-specific compilers to the list if we either don't know the compiler id,
+# or if we know it matches the regular compiler.
+foreach (lang C CXX Fortran)
+  foreach (id GNU Intel PGI XL)
+    if (NOT CMAKE_${lang}_COMPILER_ID OR CMAKE_${lang}_COMPILER_ID STREQUAL id)
+      list(APPEND _MPI_${lang}_COMPILER_NAMES ${_MPI_${id}_${lang}_COMPILER_NAMES})
+    endif()
+    unset(_MPI_${id}_${lang}_COMPILER_NAMES)    # clean up the namespace here
+  endforeach()
+endforeach()
+
+
+# Names to try for MPI exec
+set(_MPI_EXEC_NAMES                        mpiexec mpirun lamexec srun)
+
+# Grab the path to MPI from the registry if we're on windows.
+set(_MPI_PREFIX_PATH)
+if(WIN32)
+  # MSMPI
+  file(TO_CMAKE_PATH "$ENV{MSMPI_BIN}" msmpi_bin_path) # The default path ends with a '\' and doesn't mix with ';' when appending.
+  list(APPEND _MPI_PREFIX_PATH "${msmpi_bin_path}")
+  unset(msmpi_bin_path)
+  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\MPI;InstallRoot]/Bin")
+  list(APPEND _MPI_PREFIX_PATH "$ENV{MSMPI_INC}/..") # The SDK is installed separately from the runtime
+  # MPICH
+  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH\\SMPD;binary]/..")
+  list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH2;Path]")
+  list(APPEND _MPI_PREFIX_PATH "$ENV{ProgramW6432}/MPICH2/")
+endif()
+
+# Build a list of prefixes to search for MPI.
+foreach(SystemPrefixDir ${CMAKE_SYSTEM_PREFIX_PATH})
+  foreach(MpiPackageDir ${_MPI_PREFIX_PATH})
+    if(EXISTS ${SystemPrefixDir}/${MpiPackageDir})
+      list(APPEND _MPI_PREFIX_PATH "${SystemPrefixDir}/${MpiPackageDir}")
+    endif()
+  endforeach()
+endforeach()
+
+function (_mpi_check_compiler compiler options cmdvar resvar)
+  execute_process(
+    COMMAND "${compiler}" ${options}
+    OUTPUT_VARIABLE  cmdline OUTPUT_STRIP_TRAILING_WHITESPACE
+    ERROR_VARIABLE   cmdline ERROR_STRIP_TRAILING_WHITESPACE
+    RESULT_VARIABLE  success)
+  # Intel MPI 5.0.1 will return a zero return code even when the
+  # argument to the MPI compiler wrapper is unknown.  Attempt to
+  # catch this case.
+  if(cmdline MATCHES "undefined reference" OR cmdline MATCHES "unrecognized")
+    set(success 255 )
+  endif()
+  set(${cmdvar} "${cmdline}" PARENT_SCOPE)
+  set(${resvar} "${success}" PARENT_SCOPE)
+endfunction()
+
+#
+# interrogate_mpi_compiler(lang try_libs)
+#
+# Attempts to extract compiler and linker args from an MPI compiler. The arguments set
+# by this function are:
+#
+#   MPI_<lang>_INCLUDE_PATH    MPI_<lang>_LINK_FLAGS     MPI_<lang>_FOUND
+#   MPI_<lang>_COMPILE_FLAGS   MPI_<lang>_LIBRARIES
+#
+# MPI_<lang>_COMPILER must be set beforehand to the absolute path to an MPI compiler for
+# <lang>.  Additionally, MPI_<lang>_INCLUDE_PATH and MPI_<lang>_LIBRARIES may be set
+# to skip autodetection.
+#
+# If try_libs is TRUE, this will also attempt to find plain MPI libraries in the usual
+# way.  In general, this is not as effective as interrogating the compilers, as it
+# ignores language-specific flags and libraries.  However, some MPI implementations
+# (Windows implementations) do not have compiler wrappers, so this approach must be used.
+#
+function (interrogate_mpi_compiler lang try_libs)
+  # MPI_${lang}_NO_INTERROGATE will be set to a compiler name when the *regular* compiler was
+  # discovered to be the MPI compiler.  This happens on machines like the Cray XE6 that use
+  # modules to set cc, CC, and ftn to the MPI compilers.  If the user force-sets another MPI
+  # compiler, MPI_${lang}_COMPILER won't be equal to MPI_${lang}_NO_INTERROGATE, and we'll
+  # inspect that compiler anew.  This allows users to set new compilers w/o rm'ing cache.
+  string(COMPARE NOTEQUAL "${MPI_${lang}_NO_INTERROGATE}" "${MPI_${lang}_COMPILER}" interrogate)
+
+  # If MPI is set already in the cache, don't bother with interrogating the compiler.
+  if (interrogate AND ((NOT MPI_${lang}_INCLUDE_PATH) OR (NOT MPI_${lang}_LIBRARIES)))
+    if (MPI_${lang}_COMPILER)
+      # Check whether the -showme:compile option works. This indicates that we have either OpenMPI
+      # or a newer version of LAM-MPI, and implies that -showme:link will also work.
+      _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme:compile" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
+      if (MPI_COMPILER_RETURN EQUAL 0)
+        # If we appear to have -showme:compile, then we should
+        # also have -showme:link. Try it.
+        execute_process(
+          COMMAND ${MPI_${lang}_COMPILER} -showme:link
+          OUTPUT_VARIABLE  MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE
+          ERROR_VARIABLE   MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE
+          RESULT_VARIABLE  MPI_COMPILER_RETURN)
+
+        if (MPI_COMPILER_RETURN EQUAL 0)
+          # We probably have -showme:incdirs and -showme:libdirs as well,
+          # so grab that while we're at it.
+          execute_process(
+            COMMAND ${MPI_${lang}_COMPILER} -showme:incdirs
+            OUTPUT_VARIABLE  MPI_INCDIRS OUTPUT_STRIP_TRAILING_WHITESPACE
+            ERROR_VARIABLE   MPI_INCDIRS ERROR_STRIP_TRAILING_WHITESPACE)
+
+          execute_process(
+            COMMAND ${MPI_${lang}_COMPILER} -showme:libdirs
+            OUTPUT_VARIABLE  MPI_LIBDIRS OUTPUT_STRIP_TRAILING_WHITESPACE
+            ERROR_VARIABLE   MPI_LIBDIRS ERROR_STRIP_TRAILING_WHITESPACE)
+
+        else()
+          # reset things here if something went wrong.
+          set(MPI_COMPILE_CMDLINE)
+          set(MPI_LINK_CMDLINE)
+        endif()
+      endif ()
+
+      # Older versions of LAM-MPI have "-showme". Try to find that.
+      if (NOT MPI_COMPILER_RETURN EQUAL 0)
+        _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
+      endif()
+
+      # MVAPICH uses -compile-info and -link-info.  Try them.
+      if (NOT MPI_COMPILER_RETURN EQUAL 0)
+        _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-compile-info" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
+
+        # If we have compile-info, also have link-info.
+        if (MPI_COMPILER_RETURN EQUAL 0)
+          execute_process(
+            COMMAND ${MPI_${lang}_COMPILER} -link-info
+            OUTPUT_VARIABLE  MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE
+            ERROR_VARIABLE   MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE
+            RESULT_VARIABLE  MPI_COMPILER_RETURN)
+        endif()
+
+        # make sure we got compile and link.  Reset vars if something's wrong.
+        if (NOT MPI_COMPILER_RETURN EQUAL 0)
+          set(MPI_COMPILE_CMDLINE)
+          set(MPI_LINK_CMDLINE)
+        endif()
+      endif()
+
+      # MPICH just uses "-show". Try it.
+      if (NOT MPI_COMPILER_RETURN EQUAL 0)
+        _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-show" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN)
+      endif()
+
+      if (MPI_COMPILER_RETURN EQUAL 0)
+        # We have our command lines, but we might need to copy MPI_COMPILE_CMDLINE
+        # into MPI_LINK_CMDLINE, if we didn't find the link line.
+        if (NOT MPI_LINK_CMDLINE)
+          set(MPI_LINK_CMDLINE ${MPI_COMPILE_CMDLINE})
+        endif()
+      else()
+        message(STATUS "Unable to determine MPI from MPI driver ${MPI_${lang}_COMPILER}")
+        set(MPI_COMPILE_CMDLINE)
+        set(MPI_LINK_CMDLINE)
+      endif()
+
+      # Here, we're done with the interrogation part, and we'll try to extract args we care
+      # about from what we learned from the compiler wrapper scripts.
+
+      # If interrogation came back with something, extract our variable from the MPI command line
+      if (MPI_COMPILE_CMDLINE OR MPI_LINK_CMDLINE)
+        # Extract compile flags from the compile command line.
+        string(REGEX MATCHALL "(^| )-[Df]([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_FLAGS "${MPI_COMPILE_CMDLINE}")
+        set(MPI_COMPILE_FLAGS_WORK)
+
+        foreach(FLAG ${MPI_ALL_COMPILE_FLAGS})
+          if (MPI_COMPILE_FLAGS_WORK)
+            set(MPI_COMPILE_FLAGS_WORK "${MPI_COMPILE_FLAGS_WORK} ${FLAG}")
+          else()
+            set(MPI_COMPILE_FLAGS_WORK ${FLAG})
+          endif()
+        endforeach()
+
+        # Extract include paths from compile command line
+        string(REGEX MATCHALL "(^| )-I([^\" ]+|\"[^\"]+\")" MPI_ALL_INCLUDE_PATHS "${MPI_COMPILE_CMDLINE}")
+        foreach(IPATH ${MPI_ALL_INCLUDE_PATHS})
+          string(REGEX REPLACE "^ ?-I" "" IPATH ${IPATH})
+          string(REPLACE "//" "/" IPATH ${IPATH})
+          list(APPEND MPI_INCLUDE_PATH_WORK ${IPATH})
+        endforeach()
+
+        # try using showme:incdirs if extracting didn't work.
+        if (NOT MPI_INCLUDE_PATH_WORK)
+          set(MPI_INCLUDE_PATH_WORK ${MPI_INCDIRS})
+          separate_arguments(MPI_INCLUDE_PATH_WORK)
+        endif()
+
+        # If all else fails, just search for mpi.h in the normal include paths.
+        if (NOT MPI_INCLUDE_PATH_WORK)
+          set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
+          find_path(MPI_HEADER_PATH mpi.h
+            HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
+            PATH_SUFFIXES include)
+          set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH})
+        endif()
+
+        # Extract linker paths from the link command line
+        string(REGEX MATCHALL "(^| |-Wl,)(-L|/LIBPATH:)([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_PATHS "${MPI_LINK_CMDLINE}")
+        set(MPI_LINK_PATH)
+        foreach(LPATH ${MPI_ALL_LINK_PATHS})
+          string(REGEX REPLACE "^(| |-Wl,)(-L|/LIBPATH:)" "" LPATH ${LPATH})
+          string(REPLACE "//" "/" LPATH ${LPATH})
+          list(APPEND MPI_LINK_PATH ${LPATH})
+        endforeach()
+
+        # try using showme:libdirs if extracting didn't work.
+        if (NOT MPI_LINK_PATH)
+          set(MPI_LINK_PATH ${MPI_LIBDIRS})
+          separate_arguments(MPI_LINK_PATH)
+        endif()
+
+        # Extract linker flags from the link command line
+        string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker )([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_FLAGS "${MPI_LINK_CMDLINE}")
+        set(MPI_LINK_FLAGS_WORK)
+        foreach(FLAG ${MPI_ALL_LINK_FLAGS})
+          if (MPI_LINK_FLAGS_WORK)
+            set(MPI_LINK_FLAGS_WORK "${MPI_LINK_FLAGS_WORK} ${FLAG}")
+          else()
+            set(MPI_LINK_FLAGS_WORK ${FLAG})
+          endif()
+        endforeach()
+
+        # Extract the set of libraries to link against from the link command
+        # line
+        string(REGEX MATCHALL "(^| )-l([^\" ]+|\"[^\"]+\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}")
+        if(WIN32)
+          # The intel wrappers on windows link against static versions of the MPI libraries.
+          # The static libraries are simply listed on the command line without -l.
+          # For instance: " icl ... impi.lib "
+          string(REGEX MATCHALL "(^| )([^\" ]+)\\.lib" tmp "${MPI_LINK_CMDLINE}")
+          list(APPEND MPI_LIBNAMES ${tmp})
+        endif()
+
+        # add the compiler implicit directories because some compilers
+        # such as the intel compiler have libraries that show up
+        # in the showme list that can only be found in the implicit
+        # link directories of the compiler.
+        if (DEFINED CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES)
+          set(MPI_LINK_PATH
+            "${MPI_LINK_PATH};${CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES}")
+        endif ()
+
+        # Determine full path names for all of the libraries that one needs
+        # to link against in an MPI program
+        foreach(LIB ${MPI_LIBNAMES})
+          string(REGEX REPLACE "^ ?-l" "" LIB ${LIB})
+          if(WIN32)
+            string(REGEX REPLACE "\\.lib$" "" LIB ${LIB})
+          endif()
+          string(STRIP ${LIB} LIB)
+          # MPI_LIB is cached by find_library, but we don't want that.  Clear it first.
+          set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
+          find_library(MPI_LIB NAMES ${LIB} HINTS ${MPI_LINK_PATH})
+
+          if (MPI_LIB)
+            list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB})
+          elseif (NOT MPI_FIND_QUIETLY)
+            message(WARNING "Unable to find MPI library ${LIB}")
+          endif()
+        endforeach()
+
+        # Sanity check MPI_LIBRARIES to make sure there are enough libraries
+        list(LENGTH MPI_LIBRARIES_WORK MPI_NUMLIBS)
+        list(LENGTH MPI_LIBNAMES MPI_NUMLIBS_EXPECTED)
+        if (NOT MPI_NUMLIBS EQUAL MPI_NUMLIBS_EXPECTED)
+          set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND")
+        endif()
+      endif()
+
+    elseif(try_libs)
+      # If we didn't have an MPI compiler script to interrogate, attempt to find everything
+      # with plain old find functions.  This is nasty because MPI implementations have LOTS of
+      # different library names, so this section isn't going to be very generic.  We need to
+      # make sure it works for MS MPI, though, since there are no compiler wrappers for that.
+      find_path(MPI_HEADER_PATH mpi.h
+        HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
+        PATH_SUFFIXES include Inc)
+      set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH})
+
+      # Decide between 32-bit and 64-bit libraries for Microsoft's MPI
+      if("${CMAKE_SIZEOF_VOID_P}" EQUAL 8)
+        set(MS_MPI_ARCH_DIR x64)
+        set(MS_MPI_ARCH_DIR2 amd64)
+      else()
+        set(MS_MPI_ARCH_DIR x86)
+        set(MS_MPI_ARCH_DIR2 i386)
+      endif()
+
+      set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
+      find_library(MPI_LIB
+        NAMES         mpi mpich mpich2 msmpi
+        HINTS         ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
+        PATH_SUFFIXES lib lib/${MS_MPI_ARCH_DIR} Lib Lib/${MS_MPI_ARCH_DIR} Lib/${MS_MPI_ARCH_DIR2})
+      set(MPI_LIBRARIES_WORK ${MPI_LIB})
+
+      # Right now, we only know about the extra libs for C++.
+      # We could add Fortran here (as there is usually libfmpich, etc.), but
+      # this really only has to work with MS MPI on Windows.
+      # Assume that other MPI's are covered by the compiler wrappers.
+      if (${lang} STREQUAL CXX)
+        set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
+        find_library(MPI_LIB
+          NAMES         mpi++ mpicxx cxx mpi_cxx
+          HINTS         ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH}
+          PATH_SUFFIXES lib)
+        if (MPI_LIBRARIES_WORK AND MPI_LIB)
+          list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB})
+        endif()
+      endif()
+
+      if (NOT MPI_LIBRARIES_WORK)
+        set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND")
+      endif()
+    endif()
+
+    # If we found MPI, set up all of the appropriate cache entries
+    set(MPI_${lang}_COMPILE_FLAGS ${MPI_COMPILE_FLAGS_WORK} CACHE STRING "MPI ${lang} compilation flags"         FORCE)
+    set(MPI_${lang}_INCLUDE_PATH  ${MPI_INCLUDE_PATH_WORK}  CACHE STRING "MPI ${lang} include path"              FORCE)
+    set(MPI_${lang}_LINK_FLAGS    ${MPI_LINK_FLAGS_WORK}    CACHE STRING "MPI ${lang} linking flags"             FORCE)
+    set(MPI_${lang}_LIBRARIES     ${MPI_LIBRARIES_WORK}     CACHE STRING "MPI ${lang} libraries to link against" FORCE)
+    mark_as_advanced(MPI_${lang}_COMPILE_FLAGS MPI_${lang}_INCLUDE_PATH MPI_${lang}_LINK_FLAGS MPI_${lang}_LIBRARIES)
+
+    # clear out our temporary lib/header detectionv variable here.
+    set(MPI_LIB         "MPI_LIB-NOTFOUND"         CACHE INTERNAL "Scratch variable for MPI lib detection"    FORCE)
+    set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE INTERNAL "Scratch variable for MPI header detection" FORCE)
+  endif()
+
+  # finally set a found variable for each MPI language
+  if (MPI_${lang}_INCLUDE_PATH AND MPI_${lang}_LIBRARIES)
+    set(MPI_${lang}_FOUND TRUE PARENT_SCOPE)
+  else()
+    set(MPI_${lang}_FOUND FALSE PARENT_SCOPE)
+  endif()
+endfunction()
+
+
+# This function attempts to compile with the regular compiler, to see if MPI programs
+# work with it.  This is a last ditch attempt after we've tried interrogating mpicc and
+# friends, and after we've tried to find generic libraries.  Works on machines like
+# Cray XE6, where the modules environment changes what MPI version cc, CC, and ftn use.
+function(try_regular_compiler lang success)
+  set(scratch_directory ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY})
+  if (${lang} STREQUAL Fortran)
+    set(test_file ${scratch_directory}/cmake_mpi_test.f90)
+    file(WRITE ${test_file}
+      "program hello\n"
+      "include 'mpif.h'\n"
+      "integer ierror\n"
+      "call MPI_INIT(ierror)\n"
+      "call MPI_FINALIZE(ierror)\n"
+      "end\n")
+  else()
+    if (${lang} STREQUAL CXX)
+      set(test_file ${scratch_directory}/cmake_mpi_test.cpp)
+    else()
+      set(test_file ${scratch_directory}/cmake_mpi_test.c)
+    endif()
+    file(WRITE ${test_file}
+      "#include <mpi.h>\n"
+      "int main(int argc, char **argv) {\n"
+      "  MPI_Init(&argc, &argv);\n"
+      "  MPI_Finalize();\n"
+      "}\n")
+  endif()
+  try_compile(compiler_has_mpi ${scratch_directory} ${test_file})
+  if (compiler_has_mpi)
+    set(MPI_${lang}_NO_INTERROGATE ${CMAKE_${lang}_COMPILER} CACHE STRING "Whether to interrogate MPI ${lang} compiler" FORCE)
+    set(MPI_${lang}_COMPILER       ${CMAKE_${lang}_COMPILER} CACHE STRING "MPI ${lang} compiler"                        FORCE)
+    set(MPI_${lang}_COMPILE_FLAGS  ""                        CACHE STRING "MPI ${lang} compilation flags"               FORCE)
+    set(MPI_${lang}_INCLUDE_PATH   ""                        CACHE STRING "MPI ${lang} include path"                    FORCE)
+    set(MPI_${lang}_LINK_FLAGS     ""                        CACHE STRING "MPI ${lang} linking flags"                   FORCE)
+    set(MPI_${lang}_LIBRARIES      ""                        CACHE STRING "MPI ${lang} libraries to link against"       FORCE)
+  endif()
+  set(${success} ${compiler_has_mpi} PARENT_SCOPE)
+  unset(compiler_has_mpi CACHE)
+endfunction()
+
+# End definitions, commence real work here.
+
+# Most mpi distros have some form of mpiexec which gives us something we can reliably look for.
+find_program(MPIEXEC
+  NAMES ${_MPI_EXEC_NAMES}
+  HINTS ${MPI_HOME} $ENV{MPI_HOME}
+  PATHS ${_MPI_PREFIX_PATH}
+  PATH_SUFFIXES bin
+  DOC "Executable for running MPI programs.")
+
+# call get_filename_component twice to remove mpiexec and the directory it exists in (typically bin).
+# This gives us a fairly reliable base directory to search for /bin /lib and /include from.
+get_filename_component(_MPI_BASE_DIR "${MPIEXEC}" PATH)
+get_filename_component(_MPI_BASE_DIR "${_MPI_BASE_DIR}" PATH)
+
+set(MPIEXEC_NUMPROC_FLAG "-np" CACHE STRING "Flag used by MPI to specify the number of processes for MPIEXEC; the next option will be the number of processes.")
+set(MPIEXEC_PREFLAGS     ""    CACHE STRING "These flags will be directly before the executable that is being run by MPIEXEC.")
+set(MPIEXEC_POSTFLAGS    ""    CACHE STRING "These flags will come after all flags given to MPIEXEC.")
+set(MPIEXEC_MAX_NUMPROCS "2"   CACHE STRING "Maximum number of processors available to run MPI applications.")
+mark_as_advanced(MPIEXEC MPIEXEC_NUMPROC_FLAG MPIEXEC_PREFLAGS MPIEXEC_POSTFLAGS MPIEXEC_MAX_NUMPROCS)
+
+
+#=============================================================================
+# Backward compatibility input hacks.  Propagate the FindMPI hints to C and
+# CXX if the respective new versions are not defined.  Translate the old
+# MPI_LIBRARY and MPI_EXTRA_LIBRARY to respective MPI_${lang}_LIBRARIES.
+#
+# Once we find the new variables, we translate them back into their old
+# equivalents below.
+foreach (lang C CXX)
+  # Old input variables.
+  set(_MPI_OLD_INPUT_VARS COMPILER COMPILE_FLAGS INCLUDE_PATH LINK_FLAGS)
+
+  # Set new vars based on their old equivalents, if the new versions are not already set.
+  foreach (var ${_MPI_OLD_INPUT_VARS})
+    if (NOT MPI_${lang}_${var} AND MPI_${var})
+      set(MPI_${lang}_${var} "${MPI_${var}}")
+    endif()
+  endforeach()
+
+  # Special handling for MPI_LIBRARY and MPI_EXTRA_LIBRARY, which we nixed in the
+  # new FindMPI.  These need to be merged into MPI_<lang>_LIBRARIES
+  if (NOT MPI_${lang}_LIBRARIES AND (MPI_LIBRARY OR MPI_EXTRA_LIBRARY))
+    set(MPI_${lang}_LIBRARIES ${MPI_LIBRARY} ${MPI_EXTRA_LIBRARY})
+  endif()
+endforeach()
+#=============================================================================
+
+
+# This loop finds the compilers and sends them off for interrogation.
+foreach (lang C CXX Fortran)
+  if (CMAKE_${lang}_COMPILER_WORKS)
+    # If the user supplies a compiler *name* instead of an absolute path, assume that we need to find THAT compiler.
+    if (MPI_${lang}_COMPILER)
+      if (NOT IS_ABSOLUTE "${MPI_${lang}_COMPILER}")
+        # Get rid of our default list of names and just search for the name the user wants.
+        set(_MPI_${lang}_COMPILER_NAMES ${MPI_${lang}_COMPILER})
+        set(MPI_${lang}_COMPILER "MPI_${lang}_COMPILER-NOTFOUND" CACHE FILEPATH "Cleared" FORCE)
+      endif()
+      # If the user specifies a compiler, we don't want to try to search libraries either.
+      set(try_libs FALSE)
+    else()
+      set(try_libs TRUE)
+    endif()
+
+    find_program(MPI_${lang}_COMPILER
+      NAMES  ${_MPI_${lang}_COMPILER_NAMES}
+      HINTS  ${_MPI_BASE_DIR}/bin
+      PATHS  ${_MPI_PREFIX_PATH}
+      )
+    interrogate_mpi_compiler(${lang} ${try_libs})
+    mark_as_advanced(MPI_${lang}_COMPILER)
+
+    # last ditch try -- if nothing works so far, just try running the regular compiler and
+    # see if we can create an MPI executable.
+    set(regular_compiler_worked 0)
+    if (NOT MPI_${lang}_LIBRARIES OR NOT MPI_${lang}_INCLUDE_PATH)
+      try_regular_compiler(${lang} regular_compiler_worked)
+    endif()
+
+    set(MPI_${lang}_FIND_QUIETLY ${MPI_FIND_QUIETLY})
+    set(MPI_${lang}_FIND_REQUIRED ${MPI_FIND_REQUIRED})
+    set(MPI_${lang}_FIND_VERSION ${MPI_FIND_VERSION})
+    set(MPI_${lang}_FIND_VERSION_EXACT ${MPI_FIND_VERSION_EXACT})
+
+    if (regular_compiler_worked)
+      find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_COMPILER)
+    else()
+      find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_LIBRARIES MPI_${lang}_INCLUDE_PATH)
+    endif()
+  endif()
+endforeach()
+
+
+#=============================================================================
+# More backward compatibility stuff
+#
+# Bare MPI sans ${lang} vars are set to CXX then C, depending on what was found.
+# This mimics the behavior of the old language-oblivious FindMPI.
+set(_MPI_OLD_VARS FOUND COMPILER INCLUDE_PATH COMPILE_FLAGS LINK_FLAGS LIBRARIES)
+if (MPI_CXX_FOUND)
+  foreach (var ${_MPI_OLD_VARS})
+    set(MPI_${var} ${MPI_CXX_${var}})
+  endforeach()
+elseif (MPI_C_FOUND)
+  foreach (var ${_MPI_OLD_VARS})
+    set(MPI_${var} ${MPI_C_${var}})
+  endforeach()
+else()
+  # Note that we might still have found Fortran, but you'll need to use MPI_Fortran_FOUND
+  set(MPI_FOUND FALSE)
+endif()
+
+# Chop MPI_LIBRARIES into the old-style MPI_LIBRARY and MPI_EXTRA_LIBRARY, and set them in cache.
+if (MPI_LIBRARIES)
+  list(GET MPI_LIBRARIES 0 MPI_LIBRARY_WORK)
+  set(MPI_LIBRARY ${MPI_LIBRARY_WORK} CACHE FILEPATH "MPI library to link against" FORCE)
+else()
+  set(MPI_LIBRARY "MPI_LIBRARY-NOTFOUND" CACHE FILEPATH "MPI library to link against" FORCE)
+endif()
+
+list(LENGTH MPI_LIBRARIES MPI_NUMLIBS)
+if (MPI_NUMLIBS GREATER 1)
+  set(MPI_EXTRA_LIBRARY_WORK ${MPI_LIBRARIES})
+  list(REMOVE_AT MPI_EXTRA_LIBRARY_WORK 0)
+  set(MPI_EXTRA_LIBRARY ${MPI_EXTRA_LIBRARY_WORK} CACHE STRING "Extra MPI libraries to link against" FORCE)
+else()
+  set(MPI_EXTRA_LIBRARY "MPI_EXTRA_LIBRARY-NOTFOUND" CACHE STRING "Extra MPI libraries to link against" FORCE)
+endif()
+#=============================================================================
+
+# unset these vars to cleanup namespace
+unset(_MPI_OLD_VARS)
+unset(_MPI_PREFIX_PATH)
+unset(_MPI_BASE_DIR)
+foreach (lang C CXX Fortran)
+  unset(_MPI_${lang}_COMPILER_NAMES)
+endforeach()
diff --git a/share/cmake-3.6/Modules/FindMatlab.cmake b/share/cmake-3.6/Modules/FindMatlab.cmake
new file mode 100644
index 0000000..956dad2
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindMatlab.cmake
@@ -0,0 +1,1466 @@
+#.rst:
+# FindMatlab
+# ----------
+#
+# Finds Matlab installations and provides Matlab tools and libraries to cmake.
+#
+# This package first intention is to find the libraries associated with Matlab
+# in order to be able to build Matlab extensions (mex files). It can also be
+# used:
+#
+# * run specific commands in Matlab
+# * declare Matlab unit test
+# * retrieve various information from Matlab (mex extensions, versions and
+#   release queries, ...)
+#
+# The module supports the following components:
+#
+# * ``MX_LIBRARY`` and ``ENG_LIBRARY`` respectively the MX and ENG libraries of
+#   Matlab
+# * ``MAIN_PROGRAM`` the Matlab binary program.
+#
+# .. note::
+#
+#   The version given to the :command:`find_package` directive is the Matlab
+#   **version**, which should not be confused with the Matlab *release* name
+#   (eg. `R2014`).
+#   The :command:`matlab_get_version_from_release_name` and
+#   :command:`matlab_get_release_name_from_version` allow a mapping
+#   from the release name to the version.
+#
+# The variable :variable:`Matlab_ROOT_DIR` may be specified in order to give
+# the path of the desired Matlab version. Otherwise, the behaviour is platform
+# specific:
+#
+# * Windows: The installed versions of Matlab are retrieved from the
+#   Windows registry
+# * OS X: The installed versions of Matlab are given by the MATLAB
+#   paths in ``/Application``. If no such application is found, it falls back
+#   to the one that might be accessible from the PATH.
+# * Unix: The desired Matlab should be accessible from the PATH.
+#
+# Additional information is provided when :variable:`MATLAB_FIND_DEBUG` is set.
+# When a Matlab binary is found automatically and the ``MATLAB_VERSION``
+# is not given, the version is queried from Matlab directly.
+# On Windows, it can make a window running Matlab appear.
+#
+# The mapping of the release names and the version of Matlab is performed by
+# defining pairs (name, version).  The variable
+# :variable:`MATLAB_ADDITIONAL_VERSIONS` may be provided before the call to
+# the :command:`find_package` in order to handle additional versions.
+#
+# A Matlab scripts can be added to the set of tests using the
+# :command:`matlab_add_unit_test`. By default, the Matlab unit test framework
+# will be used (>= 2013a) to run this script, but regular ``.m`` files
+# returning an exit code can be used as well (0 indicating a success).
+#
+# Module Input Variables
+# ^^^^^^^^^^^^^^^^^^^^^^
+#
+# Users or projects may set the following variables to configure the module
+# behaviour:
+#
+# :variable:`Matlab_ROOT_DIR`
+#   the root of the Matlab installation.
+# :variable:`MATLAB_FIND_DEBUG`
+#   outputs debug information
+# :variable:`MATLAB_ADDITIONAL_VERSIONS`
+#   additional versions of Matlab for the automatic retrieval of the installed
+#   versions.
+#
+# Variables defined by the module
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+#
+# Result variables
+# """"""""""""""""
+#
+# ``Matlab_FOUND``
+#   ``TRUE`` if the Matlab installation is found, ``FALSE``
+#   otherwise. All variable below are defined if Matlab is found.
+# ``Matlab_ROOT_DIR``
+#   the final root of the Matlab installation determined by the FindMatlab
+#   module.
+# ``Matlab_MAIN_PROGRAM``
+#   the Matlab binary program. Available only if the component ``MAIN_PROGRAM``
+#   is given in the :command:`find_package` directive.
+# ``Matlab_INCLUDE_DIRS``
+#  the path of the Matlab libraries headers
+# ``Matlab_MEX_LIBRARY``
+#   library for mex, always available.
+# ``Matlab_MX_LIBRARY``
+#   mx library of Matlab (arrays). Available only if the component
+#   ``MX_LIBRARY`` has been requested.
+# ``Matlab_ENG_LIBRARY``
+#   Matlab engine library. Available only if the component ``ENG_LIBRARY``
+#   is requested.
+# ``Matlab_LIBRARIES``
+#   the whole set of libraries of Matlab
+# ``Matlab_MEX_COMPILER``
+#   the mex compiler of Matlab. Currently not used.
+#   Available only if the component ``MEX_COMPILER`` is asked
+#
+# Cached variables
+# """"""""""""""""
+#
+# ``Matlab_MEX_EXTENSION``
+#   the extension of the mex files for the current platform (given by Matlab).
+# ``Matlab_ROOT_DIR``
+#   the location of the root of the Matlab installation found. If this value
+#   is changed by the user, the result variables are recomputed.
+#
+# Provided macros
+# ^^^^^^^^^^^^^^^
+#
+# :command:`matlab_get_version_from_release_name`
+#   returns the version from the release name
+# :command:`matlab_get_release_name_from_version`
+#   returns the release name from the Matlab version
+#
+# Provided functions
+# ^^^^^^^^^^^^^^^^^^
+#
+# :command:`matlab_add_mex`
+#   adds a target compiling a MEX file.
+# :command:`matlab_add_unit_test`
+#   adds a Matlab unit test file as a test to the project.
+# :command:`matlab_extract_all_installed_versions_from_registry`
+#   parses the registry for all Matlab versions. Available on Windows only.
+#   The part of the registry parsed is dependent on the host processor
+# :command:`matlab_get_all_valid_matlab_roots_from_registry`
+#   returns all the possible Matlab paths, according to a previously
+#   given list. Only the existing/accessible paths are kept. This is mainly
+#   useful for the searching all possible Matlab installation.
+# :command:`matlab_get_mex_suffix`
+#   returns the suffix to be used for the mex files
+#   (platform/architecture dependent)
+# :command:`matlab_get_version_from_matlab_run`
+#   returns the version of Matlab, given the full directory of the Matlab
+#   program.
+#
+#
+# Known issues
+# ^^^^^^^^^^^^
+#
+# **Symbol clash in a MEX target**
+#   By default, every symbols inside a MEX
+#   file defined with the command :command:`matlab_add_mex` have hidden
+#   visibility, except for the entry point. This is the default behaviour of
+#   the MEX compiler, which lowers the risk of symbol collision between the
+#   libraries shipped with Matlab, and the libraries to which the MEX file is
+#   linking to. This is also the default on Windows platforms.
+#
+#   However, this is not sufficient in certain case, where for instance your
+#   MEX file is linking against libraries that are already loaded by Matlab,
+#   even if those libraries have different SONAMES.
+#   A possible solution is to hide the symbols of the libraries to which the
+#   MEX target is linking to. This can be achieved in GNU GCC compilers with
+#   the linker option ``-Wl,--exclude-libs,ALL``.
+#
+# **Tests using GPU resources**
+#   in case your MEX file is using the GPU and
+#   in order to be able to run unit tests on this MEX file, the GPU resources
+#   should be properly released by Matlab. A possible solution is to make
+#   Matlab aware of the use of the GPU resources in the session, which can be
+#   performed by a command such as ``D = gpuDevice()`` at the beginning of
+#   the test script (or via a fixture).
+#
+#
+# Reference
+# ^^^^^^^^^
+#
+# .. variable:: Matlab_ROOT_DIR
+#
+#    The root folder of the Matlab installation. If set before the call to
+#    :command:`find_package`, the module will look for the components in that
+#    path. If not set, then an automatic search of Matlab
+#    will be performed. If set, it should point to a valid version of Matlab.
+#
+# .. variable:: MATLAB_FIND_DEBUG
+#
+#    If set, the lookup of Matlab and the intermediate configuration steps are
+#    outputted to the console.
+#
+# .. variable:: MATLAB_ADDITIONAL_VERSIONS
+#
+#   If set, specifies additional versions of Matlab that may be looked for.
+#   The variable should be a list of strings, organised by pairs of release
+#   name and versions, such as follows::
+#
+#     set(MATLAB_ADDITIONAL_VERSIONS
+#         "release_name1=corresponding_version1"
+#         "release_name2=corresponding_version2"
+#         ...
+#         )
+#
+#   Example::
+#
+#     set(MATLAB_ADDITIONAL_VERSIONS
+#         "R2013b=8.2"
+#         "R2013a=8.1"
+#         "R2012b=8.0")
+#
+#   The order of entries in this list matters when several versions of
+#   Matlab are installed. The priority is set according to the ordering in
+#   this list.
+
+#=============================================================================
+# Copyright 2014-2015 Raffi Enficiaud, Max Planck Society
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(_FindMatlab_SELF_DIR "${CMAKE_CURRENT_LIST_DIR}")
+
+include(FindPackageHandleStandardArgs)
+include(CheckCXXCompilerFlag)
+
+
+# The currently supported versions. Other version can be added by the user by
+# providing MATLAB_ADDITIONAL_VERSIONS
+if(NOT MATLAB_ADDITIONAL_VERSIONS)
+  set(MATLAB_ADDITIONAL_VERSIONS)
+endif()
+
+set(MATLAB_VERSIONS_MAPPING
+  "R2016a=9.0"
+  "R2015b=8.6"
+  "R2015a=8.5"
+  "R2014b=8.4"
+  "R2014a=8.3"
+  "R2013b=8.2"
+  "R2013a=8.1"
+  "R2012b=8.0"
+  "R2012a=7.14"
+
+  "R2011b=7.13"
+  "R2011a=7.12"
+  "R2010b=7.11"
+
+  ${MATLAB_ADDITIONAL_VERSIONS}
+  )
+
+
+# temporary folder for all Matlab runs
+set(_matlab_temporary_folder ${CMAKE_BINARY_DIR}/Matlab)
+
+if(NOT EXISTS "${_matlab_temporary_folder}")
+  file(MAKE_DIRECTORY "${_matlab_temporary_folder}")
+endif()
+
+#.rst:
+# .. command:: matlab_get_version_from_release_name
+#
+#   Returns the version of Matlab (17.58) from a release name (R2017k)
+macro (matlab_get_version_from_release_name release_name version_name)
+
+  string(REGEX MATCHALL "${release_name}=([0-9]+\\.?[0-9]*)" _matched ${MATLAB_VERSIONS_MAPPING})
+
+  set(${version_name} "")
+  if(NOT _matched STREQUAL "")
+    set(${version_name} ${CMAKE_MATCH_1})
+  else()
+    message(WARNING "The release name ${release_name} is not registered")
+  endif()
+  unset(_matched)
+
+endmacro()
+
+
+
+
+
+#.rst:
+# .. command:: matlab_get_release_name_from_version
+#
+#   Returns the release name (R2017k) from the version of Matlab (17.58)
+macro (matlab_get_release_name_from_version version release_name)
+
+  set(${release_name} "")
+  foreach(_var IN LISTS MATLAB_VERSIONS_MAPPING)
+    string(REGEX MATCHALL "(.+)=${version}" _matched ${_var})
+    if(NOT _matched STREQUAL "")
+      set(${release_name} ${CMAKE_MATCH_1})
+      break()
+    endif()
+  endforeach(_var)
+
+  unset(_var)
+  unset(_matched)
+  if(${release_name} STREQUAL "")
+    message(WARNING "The version ${version} is not registered")
+  endif()
+
+endmacro()
+
+
+
+
+
+# extracts all the supported release names (R2017k...) of Matlab
+# internal use
+macro(matlab_get_supported_releases list_releases)
+  set(${list_releases})
+  foreach(_var IN LISTS MATLAB_VERSIONS_MAPPING)
+    string(REGEX MATCHALL "(.+)=([0-9]+\\.?[0-9]*)" _matched ${_var})
+    if(NOT _matched STREQUAL "")
+      list(APPEND ${list_releases} ${CMAKE_MATCH_1})
+    endif()
+    unset(_matched)
+    unset(CMAKE_MATCH_1)
+  endforeach(_var)
+  unset(_var)
+endmacro()
+
+
+
+# extracts all the supported versions of Matlab
+# internal use
+macro(matlab_get_supported_versions list_versions)
+  set(${list_versions})
+  foreach(_var IN LISTS MATLAB_VERSIONS_MAPPING)
+    string(REGEX MATCHALL "(.+)=([0-9]+\\.?[0-9]*)" _matched ${_var})
+    if(NOT _matched STREQUAL "")
+      list(APPEND ${list_versions} ${CMAKE_MATCH_2})
+    endif()
+    unset(_matched)
+    unset(CMAKE_MATCH_1)
+  endforeach(_var)
+  unset(_var)
+endmacro()
+
+
+#.rst:
+# .. command:: matlab_extract_all_installed_versions_from_registry
+#
+#   This function parses the registry and founds the Matlab versions that are
+#   installed. The found versions are returned in `matlab_versions`.
+#   Set `win64` to `TRUE` if the 64 bit version of Matlab should be looked for
+#   The returned list contains all versions under
+#   ``HKLM\\SOFTWARE\\Mathworks\\MATLAB`` or an empty list in case an error
+#   occurred (or nothing found).
+#
+#   .. note::
+#
+#     Only the versions are provided. No check is made over the existence of the
+#     installation referenced in the registry,
+#
+function(matlab_extract_all_installed_versions_from_registry win64 matlab_versions)
+
+  if(NOT CMAKE_HOST_WIN32)
+    message(FATAL_ERROR "This macro can only be called by a windows host (call to reg.exe")
+  endif()
+
+
+  if(${win64} AND ${CMAKE_HOST_SYSTEM_PROCESSOR} MATCHES "64")
+    set(APPEND_REG "/reg:64")
+  else()
+    set(APPEND_REG "/reg:32")
+  endif()
+
+  # /reg:64 should be added on 64 bits capable OSs in order to enable the
+  # redirection of 64 bits applications
+  execute_process(
+    COMMAND reg query HKEY_LOCAL_MACHINE\\SOFTWARE\\Mathworks\\MATLAB /f * /k ${APPEND_REG}
+    RESULT_VARIABLE resultMatlab
+    OUTPUT_VARIABLE varMatlab
+    ERROR_VARIABLE errMatlab
+    INPUT_FILE NUL
+    )
+
+
+  set(matlabs_from_registry)
+  if(${resultMatlab} EQUAL 0)
+
+    string(
+      REGEX MATCHALL "MATLAB\\\\([0-9]+(\\.[0-9]+)?)"
+      matlab_versions_regex ${varMatlab})
+
+    foreach(match IN LISTS matlab_versions_regex)
+      string(
+        REGEX MATCH "MATLAB\\\\(([0-9]+)(\\.([0-9]+))?)"
+        current_match ${match})
+
+      set(_matlab_current_version ${CMAKE_MATCH_1})
+      set(current_matlab_version_major ${CMAKE_MATCH_2})
+      set(current_matlab_version_minor ${CMAKE_MATCH_4})
+      if(NOT current_matlab_version_minor)
+        set(current_matlab_version_minor "0")
+      endif()
+
+      list(APPEND matlabs_from_registry ${_matlab_current_version})
+      unset(_matlab_current_version)
+    endforeach(match)
+
+  endif()
+
+  if(matlabs_from_registry)
+    list(REMOVE_DUPLICATES matlabs_from_registry)
+    list(SORT matlabs_from_registry)
+    list(REVERSE matlabs_from_registry)
+  endif()
+
+  set(${matlab_versions} ${matlabs_from_registry} PARENT_SCOPE)
+
+endfunction()
+
+
+
+# (internal)
+macro(extract_matlab_versions_from_registry_brute_force matlab_versions)
+  # get the supported versions
+  set(matlab_supported_versions)
+  matlab_get_supported_versions(matlab_supported_versions)
+
+
+  # this is a manual population of the versions we want to look for
+  # this can be done as is, but preferably with the call to
+  # matlab_get_supported_versions and variable
+
+  # populating the versions we want to look for
+  # set(matlab_supported_versions)
+
+  # # Matlab 7
+  # set(matlab_major 7)
+  # foreach(current_matlab_minor RANGE 4 20)
+    # list(APPEND matlab_supported_versions "${matlab_major}.${current_matlab_minor}")
+  # endforeach(current_matlab_minor)
+
+  # # Matlab 8
+  # set(matlab_major 8)
+  # foreach(current_matlab_minor RANGE 0 5)
+    # list(APPEND matlab_supported_versions "${matlab_major}.${current_matlab_minor}")
+  # endforeach(current_matlab_minor)
+
+  # # taking into account the possible additional versions provided by the user
+  # if(DEFINED MATLAB_ADDITIONAL_VERSIONS)
+    # list(APPEND matlab_supported_versions MATLAB_ADDITIONAL_VERSIONS)
+  # endif()
+
+
+  # we order from more recent to older
+  if(matlab_supported_versions)
+    list(REMOVE_DUPLICATES matlab_supported_versions)
+    list(SORT matlab_supported_versions)
+    list(REVERSE matlab_supported_versions)
+  endif()
+
+
+  set(${matlab_versions} ${matlab_supported_versions})
+
+
+endmacro()
+
+
+
+
+#.rst:
+# .. command:: matlab_get_all_valid_matlab_roots_from_registry
+#
+#   Populates the Matlab root with valid versions of Matlab.
+#   The returned matlab_roots is organized in pairs
+#   ``(version_number,matlab_root_path)``.
+#
+#   ::
+#
+#     matlab_get_all_valid_matlab_roots_from_registry(
+#         matlab_versions
+#         matlab_roots)
+#
+#   ``matlab_versions``
+#     the versions of each of the Matlab installations
+#   ``matlab_roots``
+#     the location of each of the Matlab installations
+function(matlab_get_all_valid_matlab_roots_from_registry matlab_versions matlab_roots)
+
+  # The matlab_versions comes either from
+  # extract_matlab_versions_from_registry_brute_force or
+  # matlab_extract_all_installed_versions_from_registry.
+
+
+  set(_matlab_roots_list )
+  foreach(_matlab_current_version ${matlab_versions})
+    get_filename_component(
+      current_MATLAB_ROOT
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MathWorks\\MATLAB\\${_matlab_current_version};MATLABROOT]"
+      ABSOLUTE)
+
+    if(EXISTS ${current_MATLAB_ROOT})
+      list(APPEND _matlab_roots_list ${_matlab_current_version} ${current_MATLAB_ROOT})
+    endif()
+
+  endforeach(_matlab_current_version)
+  unset(_matlab_current_version)
+  set(${matlab_roots} ${_matlab_roots_list} PARENT_SCOPE)
+  unset(_matlab_roots_list)
+endfunction()
+
+#.rst:
+# .. command:: matlab_get_mex_suffix
+#
+#   Returns the extension of the mex files (the suffixes).
+#   This function should not be called before the appropriate Matlab root has
+#   been found.
+#
+#   ::
+#
+#     matlab_get_mex_suffix(
+#         matlab_root
+#         mex_suffix)
+#
+#   ``matlab_root``
+#     the root of the Matlab installation
+#   ``mex_suffix``
+#     the variable name in which the suffix will be returned.
+function(matlab_get_mex_suffix matlab_root mex_suffix)
+
+  # todo setup the extension properly. Currently I do not know if this is
+  # sufficient for all win32 distributions.
+  # there is also CMAKE_EXECUTABLE_SUFFIX that could be tweaked
+  set(mexext_suffix "")
+  if(WIN32)
+    list(APPEND mexext_suffix ".bat")
+  endif()
+
+  # we first try without suffix, since cmake does not understand a list with
+  # one empty string element
+  find_program(
+    Matlab_MEXEXTENSIONS_PROG
+    NAMES mexext
+    PATHS ${matlab_root}/bin
+    DOC "Matlab MEX extension provider"
+    NO_DEFAULT_PATH
+  )
+
+  foreach(current_mexext_suffix IN LISTS mexext_suffix)
+    if(NOT DEFINED Matlab_MEXEXTENSIONS_PROG OR NOT Matlab_MEXEXTENSIONS_PROG)
+      # this call should populate the cache automatically
+      find_program(
+        Matlab_MEXEXTENSIONS_PROG
+        "mexext${current_mexext_suffix}"
+        PATHS ${matlab_root}/bin
+        DOC "Matlab MEX extension provider"
+        NO_DEFAULT_PATH
+      )
+    endif()
+  endforeach(current_mexext_suffix)
+
+
+  # the program has been found?
+  if((NOT Matlab_MEXEXTENSIONS_PROG) OR (NOT EXISTS ${Matlab_MEXEXTENSIONS_PROG}))
+    if(MATLAB_FIND_DEBUG)
+      message(WARNING "[MATLAB] Cannot found mexext program. Matlab root is ${matlab_root}")
+    endif()
+    unset(Matlab_MEXEXTENSIONS_PROG CACHE)
+    return()
+  endif()
+
+  set(_matlab_mex_extension)
+
+  set(devnull)
+  if(UNIX)
+    set(devnull INPUT_FILE /dev/null)
+  elseif(WIN32)
+    set(devnull INPUT_FILE NUL)
+  endif()
+
+  execute_process(
+    COMMAND ${Matlab_MEXEXTENSIONS_PROG}
+    OUTPUT_VARIABLE _matlab_mex_extension
+    ERROR_VARIABLE _matlab_mex_extension_error
+    ${devnull})
+  string(STRIP ${_matlab_mex_extension} _matlab_mex_extension)
+
+  unset(Matlab_MEXEXTENSIONS_PROG CACHE)
+  set(${mex_suffix} ${_matlab_mex_extension} PARENT_SCOPE)
+endfunction()
+
+
+
+
+#.rst:
+# .. command:: matlab_get_version_from_matlab_run
+#
+#   This function runs Matlab program specified on arguments and extracts its
+#   version.
+#
+#   ::
+#
+#     matlab_get_version_from_matlab_run(
+#         matlab_binary_path
+#         matlab_list_versions)
+#
+#   ``matlab_binary_path``
+#     the location of the `matlab` binary executable
+#   ``matlab_list_versions``
+#     the version extracted from Matlab
+function(matlab_get_version_from_matlab_run matlab_binary_program matlab_list_versions)
+
+  set(${matlab_list_versions} "" PARENT_SCOPE)
+
+
+  if(MATLAB_FIND_DEBUG)
+    message(STATUS "[MATLAB] Determining the version of Matlab from ${matlab_binary_program}")
+  endif()
+
+  if(EXISTS "${_matlab_temporary_folder}/matlabVersionLog.cmaketmp")
+    if(MATLAB_FIND_DEBUG)
+      message(STATUS "[MATLAB] Removing previous ${_matlab_temporary_folder}/matlabVersionLog.cmaketmp file")
+    endif()
+    file(REMOVE "${_matlab_temporary_folder}/matlabVersionLog.cmaketmp")
+  endif()
+
+
+  # the log file is needed since on windows the command executes in a new
+  # window and it is not possible to get back the answer of Matlab
+  # the -wait command is needed on windows, otherwise the call returns
+  # immediately after the program launches itself.
+  if(WIN32)
+    set(_matlab_additional_commands "-wait")
+  endif()
+
+  set(devnull)
+  if(UNIX)
+    set(devnull INPUT_FILE /dev/null)
+  elseif(WIN32)
+    set(devnull INPUT_FILE NUL)
+  endif()
+
+  # timeout set to 30 seconds, in case it does not start
+  # note as said before OUTPUT_VARIABLE cannot be used in a platform
+  # independent manner however, not setting it would flush the output of Matlab
+  # in the current console (unix variant)
+  execute_process(
+    COMMAND "${matlab_binary_program}" -nosplash -nojvm ${_matlab_additional_commands} -logfile "matlabVersionLog.cmaketmp" -nodesktop -nodisplay -r "version, exit"
+    OUTPUT_VARIABLE _matlab_version_from_cmd_dummy
+    RESULT_VARIABLE _matlab_result_version_call
+    ERROR_VARIABLE _matlab_result_version_call_error
+    TIMEOUT 30
+    WORKING_DIRECTORY "${_matlab_temporary_folder}"
+    ${devnull}
+    )
+
+
+  if(${_matlab_result_version_call})
+    if(MATLAB_FIND_DEBUG)
+      message(WARNING "[MATLAB] Unable to determine the version of Matlab. Matlab call returned with error ${_matlab_result_version_call}.")
+    endif()
+    return()
+  elseif(NOT EXISTS "${_matlab_temporary_folder}/matlabVersionLog.cmaketmp")
+    if(MATLAB_FIND_DEBUG)
+      message(WARNING "[MATLAB] Unable to determine the version of Matlab. The log file does not exist.")
+    endif()
+    return()
+  endif()
+
+  # if successful, read back the log
+  file(READ "${_matlab_temporary_folder}/matlabVersionLog.cmaketmp" _matlab_version_from_cmd)
+  file(REMOVE "${_matlab_temporary_folder}/matlabVersionLog.cmaketmp")
+
+  set(index -1)
+  string(FIND ${_matlab_version_from_cmd} "ans" index)
+  if(index EQUAL -1)
+
+    if(MATLAB_FIND_DEBUG)
+      message(WARNING "[MATLAB] Cannot find the version of Matlab returned by the run.")
+    endif()
+
+  else()
+    set(matlab_list_of_all_versions_tmp)
+
+    string(SUBSTRING ${_matlab_version_from_cmd} ${index} -1 substring_ans)
+    string(
+      REGEX MATCHALL "ans[\r\n\t ]*=[\r\n\t ]*([0-9]+(\\.[0-9]+)?)"
+      matlab_versions_regex
+      ${substring_ans})
+    foreach(match IN LISTS matlab_versions_regex)
+      string(
+        REGEX MATCH "ans[\r\n\t ]*=[\r\n\t ]*(([0-9]+)(\\.([0-9]+))?)"
+        current_match ${match})
+
+      list(APPEND matlab_list_of_all_versions_tmp ${CMAKE_MATCH_1})
+    endforeach()
+    if(matlab_list_of_all_versions_tmp)
+      list(REMOVE_DUPLICATES matlab_list_of_all_versions_tmp)
+    endif()
+    set(${matlab_list_versions} ${matlab_list_of_all_versions_tmp} PARENT_SCOPE)
+
+  endif()
+
+endfunction()
+
+
+#.rst:
+# .. command:: matlab_add_unit_test
+#
+#   Adds a Matlab unit test to the test set of cmake/ctest.
+#   This command requires the component ``MAIN_PROGRAM``.
+#   The unit test uses the Matlab unittest framework (default, available
+#   starting Matlab 2013b+) except if the option ``NO_UNITTEST_FRAMEWORK``
+#   is given.
+#
+#   The function expects one Matlab test script file to be given.
+#   In the case ``NO_UNITTEST_FRAMEWORK`` is given, the unittest script file
+#   should contain the script to be run, plus an exit command with the exit
+#   value. This exit value will be passed to the ctest framework (0 success,
+#   non 0 failure). Additional arguments accepted by :command:`add_test` can be
+#   passed through ``TEST_ARGS`` (eg. ``CONFIGURATION <config> ...``).
+#
+#   ::
+#
+#     matlab_add_unit_test(
+#         NAME <name>
+#         UNITTEST_FILE matlab_file_containing_unittest.m
+#         [UNITTEST_PRECOMMAND matlab_command_to_run]
+#         [TIMEOUT timeout]
+#         [ADDITIONAL_PATH path1 [path2 ...]]
+#         [MATLAB_ADDITIONAL_STARTUP_OPTIONS option1 [option2 ...]]
+#         [TEST_ARGS arg1 [arg2 ...]]
+#         [NO_UNITTEST_FRAMEWORK]
+#         )
+#
+#   The function arguments are:
+#
+#   ``NAME``
+#     name of the unittest in ctest.
+#   ``UNITTEST_FILE``
+#     the matlab unittest file. Its path will be automatically
+#     added to the Matlab path.
+#   ``UNITTEST_PRECOMMAND``
+#     Matlab script command to be ran before the file
+#     containing the test (eg. GPU device initialisation based on CMake
+#     variables).
+#   ``TIMEOUT``
+#     the test timeout in seconds. Defaults to 180 seconds as the
+#     Matlab unit test may hang.
+#   ``ADDITIONAL_PATH``
+#     a list of paths to add to the Matlab path prior to
+#     running the unit test.
+#   ``MATLAB_ADDITIONAL_STARTUP_OPTIONS``
+#     a list of additional option in order
+#     to run Matlab from the command line.
+#   ``TEST_ARGS``
+#     Additional options provided to the add_test command. These
+#     options are added to the default options (eg. "CONFIGURATIONS Release")
+#   ``NO_UNITTEST_FRAMEWORK``
+#     when set, indicates that the test should not
+#     use the unittest framework of Matlab (available for versions >= R2013a).
+#
+function(matlab_add_unit_test)
+
+  if(NOT Matlab_MAIN_PROGRAM)
+    message(FATAL_ERROR "[MATLAB] This functionality needs the MAIN_PROGRAM component (not default)")
+  endif()
+
+  set(options NO_UNITTEST_FRAMEWORK)
+  set(oneValueArgs NAME UNITTEST_PRECOMMAND UNITTEST_FILE TIMEOUT)
+  set(multiValueArgs ADDITIONAL_PATH MATLAB_ADDITIONAL_STARTUP_OPTIONS TEST_ARGS)
+
+  set(prefix _matlab_unittest_prefix)
+  cmake_parse_arguments(${prefix} "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN} )
+
+  if(NOT ${prefix}_NAME)
+    message(FATAL_ERROR "[MATLAB] The Matlab test name cannot be empty")
+  endif()
+
+  add_test(NAME ${${prefix}_NAME}
+           COMMAND ${CMAKE_COMMAND}
+            -Dtest_name=${${prefix}_NAME}
+            -Dadditional_paths=${${prefix}_ADDITIONAL_PATH}
+            -Dtest_timeout=${${prefix}_TIMEOUT}
+            -Doutput_directory=${_matlab_temporary_folder}
+            -DMatlab_PROGRAM=${Matlab_MAIN_PROGRAM}
+            -Dno_unittest_framework=${${prefix}_NO_UNITTEST_FRAMEWORK}
+            -DMatlab_ADDITIONNAL_STARTUP_OPTIONS=${${prefix}_MATLAB_ADDITIONAL_STARTUP_OPTIONS}
+            -Dunittest_file_to_run=${${prefix}_UNITTEST_FILE}
+            -Dcmd_to_run_before_test=${${prefix}_UNITTEST_PRECOMMAND}
+            -P ${_FindMatlab_SELF_DIR}/MatlabTestsRedirect.cmake
+           ${${prefix}_TEST_ARGS}
+           ${${prefix}_UNPARSED_ARGUMENTS}
+           )
+endfunction()
+
+
+#.rst:
+# .. command:: matlab_add_mex
+#
+#   Adds a Matlab MEX target.
+#   This commands compiles the given sources with the current tool-chain in
+#   order to produce a MEX file. The final name of the produced output may be
+#   specified, as well as additional link libraries, and a documentation entry
+#   for the MEX file. Remaining arguments of the call are passed to the
+#   :command:`add_library` command.
+#
+#   ::
+#
+#      matlab_add_mex(
+#          NAME <name>
+#          SRC src1 [src2 ...]
+#          [OUTPUT_NAME output_name]
+#          [DOCUMENTATION file.txt]
+#          [LINK_TO target1 target2 ...]
+#          [...]
+#      )
+#
+#   ``NAME``
+#     name of the target.
+#   ``SRC``
+#     list of tje source files.
+#   ``LINK_TO``
+#     a list of additional link dependencies.  The target links to ``libmex``
+#     by default. If ``Matlab_MX_LIBRARY`` is defined, it also
+#     links to ``libmx``.
+#   ``OUTPUT_NAME``
+#     if given, overrides the default name. The default name is
+#     the name of the target without any prefix and
+#     with ``Matlab_MEX_EXTENSION`` suffix.
+#   ``DOCUMENTATION``
+#     if given, the file ``file.txt`` will be considered as
+#     being the documentation file for the MEX file. This file is copied into
+#     the same folder without any processing, with the same name as the final
+#     mex file, and with extension `.m`. In that case, typing ``help <name>``
+#     in Matlab prints the documentation contained in this file.
+#
+#   The documentation file is not processed and should be in the following
+#   format:
+#
+#   ::
+#
+#     % This is the documentation
+#     function ret = mex_target_output_name(input1)
+#
+function(matlab_add_mex )
+
+  if(NOT WIN32)
+    # we do not need all this on Windows
+    # pthread options
+    check_cxx_compiler_flag(-pthread                    HAS_MINUS_PTHREAD)
+    # we should use try_compile instead, the link flags are discarded from
+    # this compiler_flag function.
+    #check_cxx_compiler_flag(-Wl,--exclude-libs,ALL HAS_SYMBOL_HIDING_CAPABILITY)
+
+  endif()
+
+  set(oneValueArgs NAME DOCUMENTATION OUTPUT_NAME)
+  set(multiValueArgs LINK_TO SRC)
+
+  set(prefix _matlab_addmex_prefix)
+  cmake_parse_arguments(${prefix} "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN} )
+
+  if(NOT ${prefix}_NAME)
+    message(FATAL_ERROR "[MATLAB] The MEX target name cannot be empty")
+  endif()
+
+  if(NOT ${prefix}_OUTPUT_NAME)
+    set(${prefix}_OUTPUT_NAME ${${prefix}_NAME})
+  endif()
+
+  add_library(${${prefix}_NAME}
+    SHARED
+      ${${prefix}_SRC}
+      ${${prefix}_DOCUMENTATION}
+      ${${prefix}_UNPARSED_ARGUMENTS})
+  target_include_directories(${${prefix}_NAME} PRIVATE ${Matlab_INCLUDE_DIRS})
+
+  if(DEFINED Matlab_MX_LIBRARY)
+    target_link_libraries(${${prefix}_NAME} ${Matlab_MX_LIBRARY})
+  endif()
+
+  target_link_libraries(${${prefix}_NAME} ${Matlab_MEX_LIBRARY} ${${prefix}_LINK_TO})
+  set_target_properties(${${prefix}_NAME}
+      PROPERTIES
+        PREFIX ""
+        OUTPUT_NAME ${${prefix}_OUTPUT_NAME}
+        SUFFIX ".${Matlab_MEX_EXTENSION}")
+
+
+  # documentation
+  if(NOT ${${prefix}_DOCUMENTATION} STREQUAL "")
+    get_target_property(output_name ${${prefix}_NAME} OUTPUT_NAME)
+    add_custom_command(
+      TARGET ${${prefix}_NAME}
+      PRE_BUILD
+      COMMAND ${CMAKE_COMMAND} -E copy_if_different ${${prefix}_DOCUMENTATION} $<TARGET_FILE_DIR:${${prefix}_NAME}>/${output_name}.m
+      COMMENT "Copy ${${prefix}_NAME} documentation file into the output folder"
+    )
+  endif() # documentation
+
+  # entry point in the mex file + taking care of visibility and symbol clashes.
+  if(WIN32)
+    set_target_properties(${${prefix}_NAME}
+      PROPERTIES
+        DEFINE_SYMBOL "DLL_EXPORT_SYM=__declspec(dllexport)")
+  else()
+
+    if(HAS_MINUS_PTHREAD AND NOT APPLE)
+      # Apparently, compiling with -pthread generated the proper link flags
+      # and some defines at compilation
+      target_compile_options(${${prefix}_NAME} PRIVATE "-pthread")
+    endif()
+
+
+    # if we do not do that, the symbols linked from eg. boost remain weak and
+    # then clash with the ones defined in the matlab process. So by default
+    # the symbols are hidden.
+    # This also means that for shared libraries (like MEX), the entry point
+    # should be explicitly declared with default visibility, otherwise Matlab
+    # cannot find the entry point.
+    # Note that this is particularly meaningful if the MEX wrapper itself
+    # contains symbols that are clashing with Matlab (that are compiled in the
+    # MEX file). In order to propagate the visibility options to the libraries
+    # to which the MEX file is linked against, the -Wl,--exclude-libs,ALL
+    # option should also be specified.
+
+    set_target_properties(${${prefix}_NAME}
+      PROPERTIES
+        CXX_VISIBILITY_PRESET "hidden"
+        C_VISIBILITY_PRESET "hidden"
+        VISIBILITY_INLINES_HIDDEN ON
+    )
+
+    #  get_target_property(
+    #    _previous_link_flags
+    #    ${${prefix}_NAME}
+    #    LINK_FLAGS)
+    #  if(NOT _previous_link_flags)
+    #    set(_previous_link_flags)
+    #  endif()
+
+    #  if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
+    #    set_target_properties(${${prefix}_NAME}
+    #      PROPERTIES
+    #        LINK_FLAGS "${_previous_link_flags} -Wl,--exclude-libs,ALL"
+    #        # -Wl,--version-script=${_FindMatlab_SELF_DIR}/MatlabLinuxVisibility.map"
+    #    )
+    #  elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+    #    # in this case, all other symbols become hidden.
+    #    set_target_properties(${${prefix}_NAME}
+    #      PROPERTIES
+    #        LINK_FLAGS "${_previous_link_flags} -Wl,-exported_symbol,_mexFunction"
+    #        #-Wl,-exported_symbols_list,${_FindMatlab_SELF_DIR}/MatlabOSXVisilibity.map"
+    #    )
+    #  endif()
+
+
+
+    set_target_properties(${${prefix}_NAME}
+      PROPERTIES
+        DEFINE_SYMBOL "DLL_EXPORT_SYM=__attribute__ ((visibility (\"default\")))"
+    )
+
+
+  endif()
+
+endfunction()
+
+
+# (internal)
+# Used to get the version of matlab, using caching. This basically transforms the
+# output of the root list, with possible unknown version, to a version
+#
+function(_Matlab_get_version_from_root matlab_root matlab_known_version matlab_final_version)
+
+  # if the version is not trivial, we query matlab for that
+  # we keep track of the location of matlab that induced this version
+  #if(NOT DEFINED Matlab_PROG_VERSION_STRING_AUTO_DETECT)
+  #  set(Matlab_PROG_VERSION_STRING_AUTO_DETECT "" CACHE INTERNAL "internal matlab location for the discovered version")
+  #endif()
+
+  if(NOT ${matlab_known_version} STREQUAL "NOTFOUND")
+    # the version is known, we just return it
+    set(${matlab_final_version} ${matlab_known_version} PARENT_SCOPE)
+    set(Matlab_VERSION_STRING_INTERNAL ${matlab_known_version} CACHE INTERNAL "Matlab version (automatically determined)" FORCE)
+    return()
+  endif()
+
+  #
+  set(_matlab_current_program ${Matlab_MAIN_PROGRAM})
+
+  # do we already have a matlab program?
+  if(NOT _matlab_current_program)
+
+    set(_find_matlab_options)
+    if(matlab_root AND EXISTS ${matlab_root})
+      set(_find_matlab_options PATHS ${matlab_root} ${matlab_root}/bin NO_DEFAULT_PATH)
+    endif()
+
+    find_program(
+        _matlab_current_program
+        matlab
+        ${_find_matlab_options}
+        DOC "Matlab main program"
+      )
+  endif()
+
+  if(NOT _matlab_current_program OR NOT EXISTS ${_matlab_current_program})
+    # if not found, clear the dependent variables
+    if(MATLAB_FIND_DEBUG)
+      message(WARNING "[MATLAB] Cannot find the main matlab program under ${matlab_root}")
+    endif()
+    set(Matlab_PROG_VERSION_STRING_AUTO_DETECT "" CACHE INTERNAL "internal matlab location for the discovered version" FORCE)
+    set(Matlab_VERSION_STRING_INTERNAL "" CACHE INTERNAL "internal matlab location for the discovered version" FORCE)
+    unset(_matlab_current_program)
+    unset(_matlab_current_program CACHE)
+    return()
+  endif()
+
+  # full real path for path comparison
+  get_filename_component(_matlab_main_real_path_tmp "${_matlab_current_program}" REALPATH)
+  unset(_matlab_current_program)
+  unset(_matlab_current_program CACHE)
+
+  # is it the same as the previous one?
+  if(_matlab_main_real_path_tmp STREQUAL Matlab_PROG_VERSION_STRING_AUTO_DETECT)
+    set(${matlab_final_version} ${Matlab_VERSION_STRING_INTERNAL} PARENT_SCOPE)
+    return()
+  endif()
+
+  # update the location of the program
+  set(Matlab_PROG_VERSION_STRING_AUTO_DETECT ${_matlab_main_real_path_tmp} CACHE INTERNAL "internal matlab location for the discovered version" FORCE)
+
+  set(matlab_list_of_all_versions)
+  matlab_get_version_from_matlab_run("${Matlab_PROG_VERSION_STRING_AUTO_DETECT}" matlab_list_of_all_versions)
+
+  list(GET matlab_list_of_all_versions 0 _matlab_version_tmp)
+
+  # set the version into the cache
+  set(Matlab_VERSION_STRING_INTERNAL ${_matlab_version_tmp} CACHE INTERNAL "Matlab version (automatically determined)" FORCE)
+
+  # warning, just in case several versions found (should not happen)
+  list(LENGTH matlab_list_of_all_versions list_of_all_versions_length)
+  if((${list_of_all_versions_length} GREATER 1) AND MATLAB_FIND_DEBUG)
+    message(WARNING "[MATLAB] Found several versions, taking the first one (versions found ${matlab_list_of_all_versions})")
+  endif()
+
+  # return the updated value
+  set(${matlab_final_version} ${Matlab_VERSION_STRING_INTERNAL} PARENT_SCOPE)
+
+endfunction()
+
+
+
+
+
+
+
+# ###################################
+# Exploring the possible Matlab_ROOTS
+
+# this variable will get all Matlab installations found in the current system.
+set(_matlab_possible_roots)
+
+
+
+if(Matlab_ROOT_DIR)
+  # if the user specifies a possible root, we keep this one
+
+  if(NOT EXISTS ${Matlab_ROOT_DIR})
+    # if Matlab_ROOT_DIR specified but erroneous
+    if(MATLAB_FIND_DEBUG)
+      message(WARNING "[MATLAB] the specified path for Matlab_ROOT_DIR does not exist (${Matlab_ROOT_DIR})")
+    endif()
+  else()
+    # NOTFOUND indicates the code below to search for the version automatically
+    if("${Matlab_VERSION_STRING_INTERNAL}" STREQUAL "")
+      list(APPEND _matlab_possible_roots "NOTFOUND" ${Matlab_ROOT_DIR}) # empty version
+    else()
+      list(APPEND _matlab_possible_roots ${Matlab_VERSION_STRING_INTERNAL} ${Matlab_ROOT_DIR}) # cached version
+    endif()
+  endif()
+
+
+else()
+
+  # if the user does not specify the possible installation root, we look for
+  # one installation using the appropriate heuristics
+
+  if(WIN32)
+
+    # On WIN32, we look for Matlab installation in the registry
+    # if unsuccessful, we look for all known revision and filter the existing
+    # ones.
+
+    # testing if we are able to extract the needed information from the registry
+    set(_matlab_versions_from_registry)
+    matlab_extract_all_installed_versions_from_registry(CMAKE_CL_64 _matlab_versions_from_registry)
+
+    # the returned list is empty, doing the search on all known versions
+    if(NOT _matlab_versions_from_registry)
+
+      if(MATLAB_FIND_DEBUG)
+        message(STATUS "[MATLAB] Search for Matlab from the registry unsuccessful, testing all supported versions")
+      endif()
+
+      extract_matlab_versions_from_registry_brute_force(_matlab_versions_from_registry)
+    endif()
+
+    # filtering the results with the registry keys
+    matlab_get_all_valid_matlab_roots_from_registry("${_matlab_versions_from_registry}" _matlab_possible_roots)
+    unset(_matlab_versions_from_registry)
+
+  elseif(APPLE)
+
+    # on mac, we look for the /Application paths
+    # this corresponds to the behaviour on Windows. On Linux, we do not have
+    # any other guess.
+    matlab_get_supported_releases(_matlab_releases)
+    if(MATLAB_FIND_DEBUG)
+      message(STATUS "[MATLAB] Matlab supported versions ${_matlab_releases}. If more version should be supported "
+                   "the variable MATLAB_ADDITIONAL_VERSIONS can be set according to the documentation")
+    endif()
+
+    foreach(_matlab_current_release IN LISTS _matlab_releases)
+      set(_matlab_full_string "/Applications/MATLAB_${_matlab_current_release}.app")
+      if(EXISTS ${_matlab_full_string})
+        set(_matlab_current_version)
+        matlab_get_version_from_release_name("${_matlab_current_release}" _matlab_current_version)
+        if(MATLAB_FIND_DEBUG)
+          message(STATUS "[MATLAB] Found version ${_matlab_current_release} (${_matlab_current_version}) in ${_matlab_full_string}")
+        endif()
+        list(APPEND _matlab_possible_roots ${_matlab_current_version} ${_matlab_full_string})
+        unset(_matlab_current_version)
+      endif()
+
+      unset(_matlab_full_string)
+    endforeach(_matlab_current_release)
+
+    unset(_matlab_current_release)
+    unset(_matlab_releases)
+
+  endif()
+
+endif()
+
+
+
+list(LENGTH _matlab_possible_roots _numbers_of_matlab_roots)
+if(_numbers_of_matlab_roots EQUAL 0)
+  # if we have not found anything, we fall back on the PATH
+
+
+  # At this point, we have no other choice than trying to find it from PATH.
+  # If set by the user, this wont change
+  find_program(
+    _matlab_main_tmp
+    NAMES matlab)
+
+
+  if(_matlab_main_tmp)
+    # we then populate the list of roots, with empty version
+    if(MATLAB_FIND_DEBUG)
+      message(STATUS "[MATLAB] matlab found from PATH: ${_matlab_main_tmp}")
+    endif()
+
+    # resolve symlinks
+    get_filename_component(_matlab_current_location "${_matlab_main_tmp}" REALPATH)
+
+    # get the directory (the command below has to be run twice)
+    # this will be the matlab root
+    get_filename_component(_matlab_current_location "${_matlab_current_location}" DIRECTORY)
+    get_filename_component(_matlab_current_location "${_matlab_current_location}" DIRECTORY) # Matlab should be in bin
+
+    list(APPEND _matlab_possible_roots "NOTFOUND" ${_matlab_current_location})
+
+    unset(_matlab_current_location)
+
+  endif()
+  unset(_matlab_main_tmp CACHE)
+
+endif()
+
+
+
+
+
+if(MATLAB_FIND_DEBUG)
+  message(STATUS "[MATLAB] Matlab root folders are ${_matlab_possible_roots}")
+endif()
+
+
+
+
+
+# take the first possible Matlab root
+list(LENGTH _matlab_possible_roots _numbers_of_matlab_roots)
+set(Matlab_VERSION_STRING "NOTFOUND")
+if(_numbers_of_matlab_roots GREATER 0)
+  list(GET _matlab_possible_roots 0 Matlab_VERSION_STRING)
+  list(GET _matlab_possible_roots 1 Matlab_ROOT_DIR)
+
+  # adding a warning in case of ambiguity
+  if(_numbers_of_matlab_roots GREATER 2 AND MATLAB_FIND_DEBUG)
+    message(WARNING "[MATLAB] Found several distributions of Matlab. Setting the current version to ${Matlab_VERSION_STRING} (located ${Matlab_ROOT_DIR})."
+                    " If this is not the desired behaviour, provide the -DMatlab_ROOT_DIR=... on the command line")
+  endif()
+endif()
+
+
+# check if the root changed against the previous defined one, if so
+# clear all the cached variables
+if(DEFINED Matlab_ROOT_DIR_LAST_CACHED)
+
+  if(NOT Matlab_ROOT_DIR_LAST_CACHED STREQUAL Matlab_ROOT_DIR)
+    set(_Matlab_cached_vars
+        Matlab_INCLUDE_DIRS
+        Matlab_MEX_LIBRARY
+        Matlab_MEX_COMPILER
+        Matlab_MAIN_PROGRAM
+        Matlab_MX_LIBRARY
+        Matlab_ENG_LIBRARY
+        Matlab_MEX_EXTENSION
+
+        # internal
+        Matlab_MEXEXTENSIONS_PROG
+        Matlab_ROOT_DIR_LAST_CACHED
+        #Matlab_PROG_VERSION_STRING_AUTO_DETECT
+        Matlab_VERSION_STRING_INTERNAL
+        )
+    foreach(_var IN LISTS _Matlab_cached_vars)
+      if(DEFINED ${_var})
+        unset(${_var} CACHE)
+      endif()
+    endforeach()
+  endif()
+endif()
+
+set(Matlab_ROOT_DIR_LAST_CACHED ${Matlab_ROOT_DIR} CACHE INTERNAL "last Matlab root dir location")
+set(Matlab_ROOT_DIR ${Matlab_ROOT_DIR} CACHE PATH "Matlab installation root path" FORCE)
+
+# Fix the version, in case this one is NOTFOUND
+_Matlab_get_version_from_root(
+  "${Matlab_ROOT_DIR}"
+  ${Matlab_VERSION_STRING}
+  Matlab_VERSION_STRING
+)
+
+
+
+
+if(MATLAB_FIND_DEBUG)
+  message(STATUS "[MATLAB] Current version is ${Matlab_VERSION_STRING} located ${Matlab_ROOT_DIR}")
+endif()
+
+
+
+if(Matlab_ROOT_DIR)
+  file(TO_CMAKE_PATH ${Matlab_ROOT_DIR} Matlab_ROOT_DIR)
+endif()
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 4)
+  set(_matlab_64Build FALSE)
+else()
+  set(_matlab_64Build TRUE)
+endif()
+
+if(APPLE)
+  set(_matlab_bin_prefix "mac") # i should be for intel
+  set(_matlab_bin_suffix_32bits "i")
+  set(_matlab_bin_suffix_64bits "i64")
+elseif(UNIX)
+  set(_matlab_bin_prefix "gln")
+  set(_matlab_bin_suffix_32bits "x86")
+  set(_matlab_bin_suffix_64bits "xa64")
+else()
+  set(_matlab_bin_prefix "win")
+  set(_matlab_bin_suffix_32bits "32")
+  set(_matlab_bin_suffix_64bits "64")
+endif()
+
+
+
+set(MATLAB_INCLUDE_DIR_TO_LOOK ${Matlab_ROOT_DIR}/extern/include)
+if(_matlab_64Build)
+  set(_matlab_current_suffix ${_matlab_bin_suffix_64bits})
+else()
+  set(_matlab_current_suffix ${_matlab_bin_suffix_32bits})
+endif()
+
+set(Matlab_BINARIES_DIR
+    ${Matlab_ROOT_DIR}/bin/${_matlab_bin_prefix}${_matlab_current_suffix})
+set(Matlab_EXTERN_LIBRARY_DIR
+    ${Matlab_ROOT_DIR}/extern/lib/${_matlab_bin_prefix}${_matlab_current_suffix})
+
+if(WIN32)
+  set(_matlab_lib_dir_for_search ${Matlab_EXTERN_LIBRARY_DIR}/microsoft)
+  set(_matlab_lib_prefix_for_search "lib")
+else()
+  set(_matlab_lib_dir_for_search ${Matlab_BINARIES_DIR})
+  set(_matlab_lib_prefix_for_search "lib")
+endif()
+
+unset(_matlab_64Build)
+
+
+if(NOT DEFINED Matlab_MEX_EXTENSION)
+  set(_matlab_mex_extension "")
+  matlab_get_mex_suffix("${Matlab_ROOT_DIR}" _matlab_mex_extension)
+
+  # This variable goes to the cache.
+  set(Matlab_MEX_EXTENSION ${_matlab_mex_extension} CACHE STRING "Extensions for the mex targets (automatically given by Matlab)")
+  unset(_matlab_mex_extension)
+endif()
+
+
+if(MATLAB_FIND_DEBUG)
+  message(STATUS "[MATLAB] [DEBUG]_matlab_lib_prefix_for_search = ${_matlab_lib_prefix_for_search} | _matlab_lib_dir_for_search = ${_matlab_lib_dir_for_search}")
+endif()
+
+
+
+# internal
+# This small stub around find_library is to prevent any pollution of CMAKE_FIND_LIBRARY_PREFIXES in the global scope.
+# This is the function to be used below instead of the find_library directives.
+function(_Matlab_find_library _matlab_library_prefix)
+  set(CMAKE_FIND_LIBRARY_PREFIXES ${CMAKE_FIND_LIBRARY_PREFIXES} ${_matlab_library_prefix})
+  find_library(${ARGN})
+endfunction()
+
+
+set(_matlab_required_variables)
+
+
+# the MEX library/header are required
+find_path(
+  Matlab_INCLUDE_DIRS
+  mex.h
+  PATHS ${MATLAB_INCLUDE_DIR_TO_LOOK}
+  NO_DEFAULT_PATH
+  )
+list(APPEND _matlab_required_variables Matlab_INCLUDE_DIRS)
+
+_Matlab_find_library(
+  ${_matlab_lib_prefix_for_search}
+  Matlab_MEX_LIBRARY
+  mex
+  PATHS ${_matlab_lib_dir_for_search}
+  NO_DEFAULT_PATH
+)
+
+
+list(APPEND _matlab_required_variables Matlab_MEX_LIBRARY)
+
+# the MEX extension is required
+list(APPEND _matlab_required_variables Matlab_MEX_EXTENSION)
+
+# the matlab root is required
+list(APPEND _matlab_required_variables Matlab_ROOT_DIR)
+
+
+# component Mex Compiler
+list(FIND Matlab_FIND_COMPONENTS MEX_COMPILER _matlab_find_mex_compiler)
+if(_matlab_find_mex_compiler GREATER -1)
+  find_program(
+    Matlab_MEX_COMPILER
+    "mex"
+    PATHS ${Matlab_BINARIES_DIR}
+    DOC "Matlab MEX compiler"
+    NO_DEFAULT_PATH
+  )
+
+  if(Matlab_MEX_COMPILER)
+    set(Matlab_MEX_COMPILER_FOUND TRUE)
+  endif()
+endif()
+unset(_matlab_find_mex_compiler)
+
+# component Matlab program
+list(FIND Matlab_FIND_COMPONENTS MAIN_PROGRAM _matlab_find_matlab_program)
+if(_matlab_find_matlab_program GREATER -1)
+
+  find_program(
+    Matlab_MAIN_PROGRAM
+    matlab
+    PATHS ${Matlab_ROOT_DIR} ${Matlab_ROOT_DIR}/bin
+    DOC "Matlab main program"
+    NO_DEFAULT_PATH
+  )
+
+  if(Matlab_MAIN_PROGRAM)
+    set(Matlab_MAIN_PROGRAM_FOUND TRUE)
+  endif()
+
+endif()
+unset(_matlab_find_matlab_program)
+
+# Component MX library
+list(FIND Matlab_FIND_COMPONENTS MX_LIBRARY _matlab_find_mx)
+if(_matlab_find_mx GREATER -1)
+  _Matlab_find_library(
+    ${_matlab_lib_prefix_for_search}
+    Matlab_MX_LIBRARY
+    mx
+    PATHS ${_matlab_lib_dir_for_search}
+    NO_DEFAULT_PATH
+  )
+
+  if(Matlab_MX_LIBRARY)
+    set(Matlab_MX_LIBRARY_FOUND TRUE)
+  endif()
+endif()
+unset(_matlab_find_mx)
+
+
+# Component ENG library
+list(FIND Matlab_FIND_COMPONENTS ENG_LIBRARY _matlab_find_eng)
+if(_matlab_find_eng GREATER -1)
+  _Matlab_find_library(
+    ${_matlab_lib_prefix_for_search}
+    Matlab_ENG_LIBRARY
+    eng
+    PATHS ${_matlab_lib_dir_for_search}
+    NO_DEFAULT_PATH
+  )
+  if(Matlab_ENG_LIBRARY)
+    set(Matlab_ENG_LIBRARY_FOUND TRUE)
+  endif()
+endif()
+unset(_matlab_find_eng)
+
+
+
+
+
+unset(_matlab_lib_dir_for_search)
+
+
+set(Matlab_LIBRARIES ${Matlab_MEX_LIBRARY} ${Matlab_MX_LIBRARY} ${Matlab_ENG_LIBRARY})
+
+
+find_package_handle_standard_args(
+  Matlab
+  FOUND_VAR Matlab_FOUND
+  REQUIRED_VARS ${_matlab_required_variables}
+  VERSION_VAR Matlab_VERSION_STRING
+  HANDLE_COMPONENTS)
+
+unset(_matlab_required_variables)
+unset(_matlab_bin_prefix)
+unset(_matlab_bin_suffix_32bits)
+unset(_matlab_bin_suffix_64bits)
+unset(_matlab_current_suffix)
+unset(_matlab_lib_dir_for_search)
+unset(_matlab_lib_prefix_for_search)
+
+if(Matlab_INCLUDE_DIRS AND Matlab_LIBRARIES)
+  mark_as_advanced(
+    #Matlab_LIBRARIES
+    Matlab_MEX_LIBRARY
+    Matlab_MX_LIBRARY
+    Matlab_ENG_LIBRARY
+    Matlab_INCLUDE_DIRS
+    Matlab_FOUND
+    #Matlab_ROOT_DIR
+    #Matlab_VERSION_STRING
+    Matlab_MAIN_PROGRAM
+    #Matlab_MEX_EXTENSION
+    Matlab_MEXEXTENSIONS_PROG
+    Matlab_MEX_EXTENSION
+    #Matlab_BINARIES_DIR
+  )
+endif()
diff --git a/share/cmake-3.2/Modules/FindMotif.cmake b/share/cmake-3.6/Modules/FindMotif.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindMotif.cmake
rename to share/cmake-3.6/Modules/FindMotif.cmake
diff --git a/share/cmake-3.6/Modules/FindOpenAL.cmake b/share/cmake-3.6/Modules/FindOpenAL.cmake
new file mode 100644
index 0000000..eb63cef
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindOpenAL.cmake
@@ -0,0 +1,110 @@
+#.rst:
+# FindOpenAL
+# ----------
+#
+#
+#
+# Locate OpenAL This module defines OPENAL_LIBRARY OPENAL_FOUND, if
+# false, do not try to link to OpenAL OPENAL_INCLUDE_DIR, where to find
+# the headers
+#
+# $OPENALDIR is an environment variable that would correspond to the
+# ./configure --prefix=$OPENALDIR used in building OpenAL.
+#
+# Created by Eric Wing.  This was influenced by the FindSDL.cmake
+# module.
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This makes the presumption that you are include al.h like
+# #include "al.h"
+# and not
+# #include <AL/al.h>
+# The reason for this is that the latter is not entirely portable.
+# Windows/Creative Labs does not by default put their headers in AL/ and
+# OS X uses the convention <OpenAL/al.h>.
+#
+# For Windows, Creative Labs seems to have added a registry key for their
+# OpenAL 1.1 installer. I have added that key to the list of search paths,
+# however, the key looks like it could be a little fragile depending on
+# if they decide to change the 1.00.0000 number for bug fix releases.
+# Also, they seem to have laid down groundwork for multiple library platforms
+# which puts the library in an extra subdirectory. Currently there is only
+# Win32 and I have hardcoded that here. This may need to be adjusted as
+# platforms are introduced.
+# The OpenAL 1.0 installer doesn't seem to have a useful key I can use.
+# I do not know if the Nvidia OpenAL SDK has a registry key.
+#
+# For OS X, remember that OpenAL was added by Apple in 10.4 (Tiger).
+# To support the framework, I originally wrote special framework detection
+# code in this module which I have now removed with CMake's introduction
+# of native support for frameworks.
+# In addition, OpenAL is open source, and it is possible to compile on Panther.
+# Furthermore, due to bugs in the initial OpenAL release, and the
+# transition to OpenAL 1.1, it is common to need to override the built-in
+# framework.
+# Per my request, CMake should search for frameworks first in
+# the following order:
+# ~/Library/Frameworks/OpenAL.framework/Headers
+# /Library/Frameworks/OpenAL.framework/Headers
+# /System/Library/Frameworks/OpenAL.framework/Headers
+#
+# On OS X, this will prefer the Framework version (if found) over others.
+# People will have to manually change the cache values of
+# OPENAL_LIBRARY to override this selection or set the CMake environment
+# CMAKE_INCLUDE_PATH to modify the search paths.
+
+find_path(OPENAL_INCLUDE_DIR al.h
+  HINTS
+    ENV OPENALDIR
+  PATH_SUFFIXES include/AL include/OpenAL include
+  PATHS
+  ~/Library/Frameworks
+  /Library/Frameworks
+  /sw # Fink
+  /opt/local # DarwinPorts
+  /opt/csw # Blastwave
+  /opt
+  [HKEY_LOCAL_MACHINE\\SOFTWARE\\Creative\ Labs\\OpenAL\ 1.1\ Software\ Development\ Kit\\1.00.0000;InstallDir]
+)
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(_OpenAL_ARCH_DIR libs/Win64)
+else()
+  set(_OpenAL_ARCH_DIR libs/Win32)
+endif()
+
+find_library(OPENAL_LIBRARY
+  NAMES OpenAL al openal OpenAL32
+  HINTS
+    ENV OPENALDIR
+  PATH_SUFFIXES lib64 lib libs64 libs ${_OpenAL_ARCH_DIR}
+  PATHS
+  ~/Library/Frameworks
+  /Library/Frameworks
+  /sw
+  /opt/local
+  /opt/csw
+  /opt
+  [HKEY_LOCAL_MACHINE\\SOFTWARE\\Creative\ Labs\\OpenAL\ 1.1\ Software\ Development\ Kit\\1.00.0000;InstallDir]
+)
+
+unset(_OpenAL_ARCH_DIR)
+
+# handle the QUIETLY and REQUIRED arguments and set OPENAL_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(OpenAL  DEFAULT_MSG  OPENAL_LIBRARY OPENAL_INCLUDE_DIR)
+
+mark_as_advanced(OPENAL_LIBRARY OPENAL_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindOpenCL.cmake b/share/cmake-3.6/Modules/FindOpenCL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindOpenCL.cmake
rename to share/cmake-3.6/Modules/FindOpenCL.cmake
diff --git a/share/cmake-3.6/Modules/FindOpenGL.cmake b/share/cmake-3.6/Modules/FindOpenGL.cmake
new file mode 100644
index 0000000..93e488b
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindOpenGL.cmake
@@ -0,0 +1,180 @@
+#.rst:
+# FindOpenGL
+# ----------
+#
+# FindModule for OpenGL and GLU.
+#
+# Result Variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module sets the following variables:
+#
+# ``OPENGL_FOUND``
+#  True, if the system has OpenGL.
+# ``OPENGL_XMESA_FOUND``
+#  True, if the system has XMESA.
+# ``OPENGL_GLU_FOUND``
+#  True, if the system has GLU.
+# ``OPENGL_INCLUDE_DIR``
+#  Path to the OpenGL include directory.
+# ``OPENGL_LIBRARIES``
+#  Paths to the OpenGL and GLU libraries.
+#
+# If you want to use just GL you can use these values:
+#
+# ``OPENGL_gl_LIBRARY``
+#  Path to the OpenGL library.
+# ``OPENGL_glu_LIBRARY``
+#  Path to the GLU library.
+#
+# OSX Specific
+# ^^^^^^^^^^^^
+#
+# On OSX default to using the framework version of OpenGL. People will
+# have to change the cache values of OPENGL_glu_LIBRARY and
+# OPENGL_gl_LIBRARY to use OpenGL with X11 on OSX.
+
+
+#=============================================================================
+# Copyright 2001-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(_OpenGL_REQUIRED_VARS OPENGL_gl_LIBRARY)
+
+if (CYGWIN)
+
+  find_path(OPENGL_INCLUDE_DIR GL/gl.h )
+  list(APPEND _OpenGL_REQUIRED_VARS OPENGL_INCLUDE_DIR)
+
+  find_library(OPENGL_gl_LIBRARY opengl32 )
+
+  find_library(OPENGL_glu_LIBRARY glu32 )
+
+elseif (WIN32)
+
+  if(BORLAND)
+    set (OPENGL_gl_LIBRARY import32 CACHE STRING "OpenGL library for win32")
+    set (OPENGL_glu_LIBRARY import32 CACHE STRING "GLU library for win32")
+  else()
+    set (OPENGL_gl_LIBRARY opengl32 CACHE STRING "OpenGL library for win32")
+    set (OPENGL_glu_LIBRARY glu32 CACHE STRING "GLU library for win32")
+  endif()
+
+elseif (APPLE)
+
+  # The OpenGL.framework provides both gl and glu
+  find_library(OPENGL_gl_LIBRARY OpenGL DOC "OpenGL library for OS X")
+  find_library(OPENGL_glu_LIBRARY OpenGL DOC
+    "GLU library for OS X (usually same as OpenGL library)")
+  find_path(OPENGL_INCLUDE_DIR OpenGL/gl.h DOC "Include for OpenGL on OS X")
+  list(APPEND _OpenGL_REQUIRED_VARS OPENGL_INCLUDE_DIR)
+
+else()
+  if (CMAKE_SYSTEM_NAME MATCHES "HP-UX")
+    # Handle HP-UX cases where we only want to find OpenGL in either hpux64
+    # or hpux32 depending on if we're doing a 64 bit build.
+    if(CMAKE_SIZEOF_VOID_P EQUAL 4)
+      set(_OPENGL_LIB_PATH
+        /opt/graphics/OpenGL/lib/hpux32/)
+    else()
+      set(_OPENGL_LIB_PATH
+        /opt/graphics/OpenGL/lib/hpux64/
+        /opt/graphics/OpenGL/lib/pa20_64)
+    endif()
+  elseif(CMAKE_SYSTEM_NAME STREQUAL Haiku)
+    set(_OPENGL_LIB_PATH
+      /boot/develop/lib/x86)
+    set(_OPENGL_INCLUDE_PATH
+      /boot/develop/headers/os/opengl)
+  endif()
+
+  # The first line below is to make sure that the proper headers
+  # are used on a Linux machine with the NVidia drivers installed.
+  # They replace Mesa with NVidia's own library but normally do not
+  # install headers and that causes the linking to
+  # fail since the compiler finds the Mesa headers but NVidia's library.
+  # Make sure the NVIDIA directory comes BEFORE the others.
+  #  - Atanas Georgiev <atanas@cs.columbia.edu>
+
+  find_path(OPENGL_INCLUDE_DIR GL/gl.h
+    /usr/share/doc/NVIDIA_GLX-1.0/include
+    /usr/openwin/share/include
+    /opt/graphics/OpenGL/include /usr/X11R6/include
+    ${_OPENGL_INCLUDE_PATH}
+  )
+  list(APPEND _OpenGL_REQUIRED_VARS OPENGL_INCLUDE_DIR)
+
+  find_path(OPENGL_xmesa_INCLUDE_DIR GL/xmesa.h
+    /usr/share/doc/NVIDIA_GLX-1.0/include
+    /usr/openwin/share/include
+    /opt/graphics/OpenGL/include /usr/X11R6/include
+  )
+
+  find_library(OPENGL_gl_LIBRARY
+    NAMES GL MesaGL
+    PATHS /opt/graphics/OpenGL/lib
+          /usr/openwin/lib
+          /usr/shlib /usr/X11R6/lib
+          ${_OPENGL_LIB_PATH}
+  )
+
+  unset(_OPENGL_INCLUDE_PATH)
+  unset(_OPENGL_LIB_PATH)
+
+  find_library(OPENGL_glu_LIBRARY
+    NAMES GLU MesaGLU
+    PATHS ${OPENGL_gl_LIBRARY}
+          /opt/graphics/OpenGL/lib
+          /usr/openwin/lib
+          /usr/shlib /usr/X11R6/lib
+  )
+
+endif ()
+
+if(OPENGL_gl_LIBRARY)
+
+    if(OPENGL_xmesa_INCLUDE_DIR)
+      set( OPENGL_XMESA_FOUND "YES" )
+    else()
+      set( OPENGL_XMESA_FOUND "NO" )
+    endif()
+
+    set( OPENGL_LIBRARIES  ${OPENGL_gl_LIBRARY} ${OPENGL_LIBRARIES})
+    if(OPENGL_glu_LIBRARY)
+      set( OPENGL_GLU_FOUND "YES" )
+      if(NOT "${OPENGL_glu_LIBRARY}" STREQUAL "${OPENGL_gl_LIBRARY}")
+        set( OPENGL_LIBRARIES ${OPENGL_glu_LIBRARY} ${OPENGL_LIBRARIES} )
+      endif()
+    else()
+      set( OPENGL_GLU_FOUND "NO" )
+    endif()
+
+    # This deprecated setting is for backward compatibility with CMake1.4
+    set (OPENGL_LIBRARY ${OPENGL_LIBRARIES})
+
+endif()
+
+# This deprecated setting is for backward compatibility with CMake1.4
+set(OPENGL_INCLUDE_PATH ${OPENGL_INCLUDE_DIR})
+
+# handle the QUIETLY and REQUIRED arguments and set OPENGL_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(OpenGL REQUIRED_VARS ${_OpenGL_REQUIRED_VARS})
+unset(_OpenGL_REQUIRED_VARS)
+
+mark_as_advanced(
+  OPENGL_INCLUDE_DIR
+  OPENGL_xmesa_INCLUDE_DIR
+  OPENGL_glu_LIBRARY
+  OPENGL_gl_LIBRARY
+)
diff --git a/share/cmake-3.6/Modules/FindOpenMP.cmake b/share/cmake-3.6/Modules/FindOpenMP.cmake
new file mode 100644
index 0000000..ee4bdd6
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindOpenMP.cmake
@@ -0,0 +1,242 @@
+#.rst:
+# FindOpenMP
+# ----------
+#
+# Finds OpenMP support
+#
+# This module can be used to detect OpenMP support in a compiler.  If
+# the compiler supports OpenMP, the flags required to compile with
+# OpenMP support are returned in variables for the different languages.
+# The variables may be empty if the compiler does not need a special
+# flag to support OpenMP.
+#
+# The following variables are set:
+#
+# ::
+#
+#    OpenMP_C_FLAGS - flags to add to the C compiler for OpenMP support
+#    OpenMP_CXX_FLAGS - flags to add to the CXX compiler for OpenMP support
+#    OpenMP_Fortran_FLAGS - flags to add to the Fortran compiler for OpenMP support
+#    OPENMP_FOUND - true if openmp is detected
+#
+#
+#
+# Supported compilers can be found at
+# http://openmp.org/wp/openmp-compilers/
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+# Copyright 2008-2009 André Rigland Brodtkorb <Andre.Brodtkorb@ifi.uio.no>
+# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
+# Copyright 2014 Nicolas Bock <nicolasbock@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(_OPENMP_REQUIRED_VARS)
+set(CMAKE_REQUIRED_QUIET_SAVE ${CMAKE_REQUIRED_QUIET})
+set(CMAKE_REQUIRED_QUIET ${OpenMP_FIND_QUIETLY})
+
+function(_OPENMP_FLAG_CANDIDATES LANG)
+  set(OpenMP_FLAG_CANDIDATES
+    #Empty, if compiler automatically accepts openmp
+    " "
+    #GNU
+    "-fopenmp"
+    #Clang
+    "-fopenmp=libomp"
+    #Microsoft Visual Studio
+    "/openmp"
+    #Intel windows
+    "-Qopenmp"
+    #PathScale, Intel
+    "-openmp"
+    #Sun
+    "-xopenmp"
+    #HP
+    "+Oopenmp"
+    #IBM XL C/c++
+    "-qsmp"
+    #Portland Group, MIPSpro
+    "-mp"
+  )
+
+  set(OMP_FLAG_GNU "-fopenmp")
+  set(OMP_FLAG_Clang "-fopenmp=libomp")
+  set(OMP_FLAG_HP "+Oopenmp")
+  if(WIN32)
+    set(OMP_FLAG_Intel "-Qopenmp")
+  elseif(CMAKE_${LANG}_COMPILER_ID STREQUAL "Intel" AND
+         "${CMAKE_${LANG}_COMPILER_VERSION}" VERSION_LESS "15.0.0.20140528")
+    set(OMP_FLAG_Intel "-openmp")
+  else()
+    set(OMP_FLAG_Intel "-qopenmp")
+  endif()
+  set(OMP_FLAG_MIPSpro "-mp")
+  set(OMP_FLAG_MSVC "/openmp")
+  set(OMP_FLAG_PathScale "-openmp")
+  set(OMP_FLAG_PGI "-mp")
+  set(OMP_FLAG_SunPro "-xopenmp")
+  set(OMP_FLAG_XL "-qsmp")
+  set(OMP_FLAG_Cray " ")
+
+  # Move the flag that matches the compiler to the head of the list,
+  # this is faster and doesn't clutter the output that much. If that
+  # flag doesn't work we will still try all.
+  if(OMP_FLAG_${CMAKE_${LANG}_COMPILER_ID})
+    list(REMOVE_ITEM OpenMP_FLAG_CANDIDATES "${OMP_FLAG_${CMAKE_${LANG}_COMPILER_ID}}")
+    list(INSERT OpenMP_FLAG_CANDIDATES 0 "${OMP_FLAG_${CMAKE_${LANG}_COMPILER_ID}}")
+  endif()
+
+  set(OpenMP_${LANG}_FLAG_CANDIDATES "${OpenMP_FLAG_CANDIDATES}" PARENT_SCOPE)
+endfunction()
+
+# sample openmp source code to test
+set(OpenMP_C_TEST_SOURCE
+"
+#include <omp.h>
+int main() {
+#ifdef _OPENMP
+  return 0;
+#else
+  breaks_on_purpose
+#endif
+}
+")
+
+# same in Fortran
+set(OpenMP_Fortran_TEST_SOURCE
+  "
+      program test
+      use omp_lib
+      integer :: n
+      n = omp_get_num_threads()
+      end program test
+  "
+  )
+
+# check c compiler
+if(CMAKE_C_COMPILER_LOADED)
+  # if these are set then do not try to find them again,
+  # by avoiding any try_compiles for the flags
+  if(OpenMP_C_FLAGS)
+    unset(OpenMP_C_FLAG_CANDIDATES)
+  else()
+    _OPENMP_FLAG_CANDIDATES("C")
+    include(${CMAKE_CURRENT_LIST_DIR}/CheckCSourceCompiles.cmake)
+  endif()
+
+  foreach(FLAG IN LISTS OpenMP_C_FLAG_CANDIDATES)
+    set(SAFE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
+    set(CMAKE_REQUIRED_FLAGS "${FLAG}")
+    unset(OpenMP_FLAG_DETECTED CACHE)
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Try OpenMP C flag = [${FLAG}]")
+    endif()
+    check_c_source_compiles("${OpenMP_C_TEST_SOURCE}" OpenMP_FLAG_DETECTED)
+    set(CMAKE_REQUIRED_FLAGS "${SAFE_CMAKE_REQUIRED_FLAGS}")
+    if(OpenMP_FLAG_DETECTED)
+      set(OpenMP_C_FLAGS_INTERNAL "${FLAG}")
+      break()
+    endif()
+  endforeach()
+
+  set(OpenMP_C_FLAGS "${OpenMP_C_FLAGS_INTERNAL}"
+    CACHE STRING "C compiler flags for OpenMP parallization")
+
+  list(APPEND _OPENMP_REQUIRED_VARS OpenMP_C_FLAGS)
+  unset(OpenMP_C_FLAG_CANDIDATES)
+endif()
+
+# check cxx compiler
+if(CMAKE_CXX_COMPILER_LOADED)
+  # if these are set then do not try to find them again,
+  # by avoiding any try_compiles for the flags
+  if(OpenMP_CXX_FLAGS)
+    unset(OpenMP_CXX_FLAG_CANDIDATES)
+  else()
+    _OPENMP_FLAG_CANDIDATES("CXX")
+    include(${CMAKE_CURRENT_LIST_DIR}/CheckCXXSourceCompiles.cmake)
+
+    # use the same source for CXX as C for now
+    set(OpenMP_CXX_TEST_SOURCE ${OpenMP_C_TEST_SOURCE})
+  endif()
+
+  foreach(FLAG IN LISTS OpenMP_CXX_FLAG_CANDIDATES)
+    set(SAFE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
+    set(CMAKE_REQUIRED_FLAGS "${FLAG}")
+    unset(OpenMP_FLAG_DETECTED CACHE)
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Try OpenMP CXX flag = [${FLAG}]")
+    endif()
+    check_cxx_source_compiles("${OpenMP_CXX_TEST_SOURCE}" OpenMP_FLAG_DETECTED)
+    set(CMAKE_REQUIRED_FLAGS "${SAFE_CMAKE_REQUIRED_FLAGS}")
+    if(OpenMP_FLAG_DETECTED)
+      set(OpenMP_CXX_FLAGS_INTERNAL "${FLAG}")
+      break()
+    endif()
+  endforeach()
+
+  set(OpenMP_CXX_FLAGS "${OpenMP_CXX_FLAGS_INTERNAL}"
+    CACHE STRING "C++ compiler flags for OpenMP parallization")
+
+  list(APPEND _OPENMP_REQUIRED_VARS OpenMP_CXX_FLAGS)
+  unset(OpenMP_CXX_FLAG_CANDIDATES)
+  unset(OpenMP_CXX_TEST_SOURCE)
+endif()
+
+# check Fortran compiler
+if(CMAKE_Fortran_COMPILER_LOADED)
+  # if these are set then do not try to find them again,
+  # by avoiding any try_compiles for the flags
+  if(OpenMP_Fortran_FLAGS)
+    unset(OpenMP_Fortran_FLAG_CANDIDATES)
+  else()
+    _OPENMP_FLAG_CANDIDATES("Fortran")
+    include(${CMAKE_CURRENT_LIST_DIR}/CheckFortranSourceCompiles.cmake)
+  endif()
+
+  foreach(FLAG IN LISTS OpenMP_Fortran_FLAG_CANDIDATES)
+    set(SAFE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
+    set(CMAKE_REQUIRED_FLAGS "${FLAG}")
+    unset(OpenMP_FLAG_DETECTED CACHE)
+    if(NOT CMAKE_REQUIRED_QUIET)
+      message(STATUS "Try OpenMP Fortran flag = [${FLAG}]")
+    endif()
+    check_fortran_source_compiles("${OpenMP_Fortran_TEST_SOURCE}" OpenMP_FLAG_DETECTED)
+    set(CMAKE_REQUIRED_FLAGS "${SAFE_CMAKE_REQUIRED_FLAGS}")
+    if(OpenMP_FLAG_DETECTED)
+      set(OpenMP_Fortran_FLAGS_INTERNAL "${FLAG}")
+      break()
+    endif()
+  endforeach()
+
+  set(OpenMP_Fortran_FLAGS "${OpenMP_Fortran_FLAGS_INTERNAL}"
+    CACHE STRING "Fortran compiler flags for OpenMP parallization")
+
+  list(APPEND _OPENMP_REQUIRED_VARS OpenMP_Fortran_FLAGS)
+  unset(OpenMP_Fortran_FLAG_CANDIDATES)
+  unset(OpenMP_Fortran_TEST_SOURCE)
+endif()
+
+set(CMAKE_REQUIRED_QUIET ${CMAKE_REQUIRED_QUIET_SAVE})
+
+if(_OPENMP_REQUIRED_VARS)
+  include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+  find_package_handle_standard_args(OpenMP
+                                    REQUIRED_VARS ${_OPENMP_REQUIRED_VARS})
+
+  mark_as_advanced(${_OPENMP_REQUIRED_VARS})
+
+  unset(_OPENMP_REQUIRED_VARS)
+else()
+  message(SEND_ERROR "FindOpenMP requires C or CXX language to be enabled")
+endif()
diff --git a/share/cmake-3.6/Modules/FindOpenSSL.cmake b/share/cmake-3.6/Modules/FindOpenSSL.cmake
new file mode 100644
index 0000000..8dbaf11
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindOpenSSL.cmake
@@ -0,0 +1,454 @@
+#.rst:
+# FindOpenSSL
+# -----------
+#
+# Find the OpenSSL encryption library.
+#
+# Imported Targets
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines the following :prop_tgt:`IMPORTED` targets:
+#
+# ``OpenSSL::SSL``
+#   The OpenSSL ``ssl`` library, if found.
+# ``OpenSSL::Crypto``
+#   The OpenSSL ``crypto`` library, if found.
+#
+# Result Variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module will set the following variables in your project:
+#
+# ``OPENSSL_FOUND``
+#   System has the OpenSSL library.
+# ``OPENSSL_INCLUDE_DIR``
+#   The OpenSSL include directory.
+# ``OPENSSL_CRYPTO_LIBRARY``
+#   The OpenSSL crypto library.
+# ``OPENSSL_SSL_LIBRARY``
+#   The OpenSSL SSL library.
+# ``OPENSSL_LIBRARIES``
+#   All OpenSSL libraries.
+# ``OPENSSL_VERSION``
+#   This is set to ``$major.$minor.$revision$patch`` (e.g. ``0.9.8s``).
+#
+# Hints
+# ^^^^^
+#
+# Set ``OPENSSL_ROOT_DIR`` to the root directory of an OpenSSL installation.
+# Set ``OPENSSL_USE_STATIC_LIBS`` to ``TRUE`` to look for static libraries.
+# Set ``OPENSSL_MSVC_STATIC_RT`` set ``TRUE`` to choose the MT version of the lib.
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+# Copyright 2006 Alexander Neundorf <neundorf@kde.org>
+# Copyright 2009-2011 Mathieu Malaterre <mathieu.malaterre@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if (UNIX)
+  find_package(PkgConfig QUIET)
+  pkg_check_modules(_OPENSSL QUIET openssl)
+endif ()
+
+# Support preference of static libs by adjusting CMAKE_FIND_LIBRARY_SUFFIXES
+if(OPENSSL_USE_STATIC_LIBS)
+  set(_openssl_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
+  if(WIN32)
+    set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
+  else()
+    set(CMAKE_FIND_LIBRARY_SUFFIXES .a )
+  endif()
+endif()
+
+if (WIN32)
+  # http://www.slproweb.com/products/Win32OpenSSL.html
+  set(_OPENSSL_ROOT_HINTS
+    ${OPENSSL_ROOT_DIR}
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (32-bit)_is1;Inno Setup: App Path]"
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\OpenSSL (64-bit)_is1;Inno Setup: App Path]"
+    ENV OPENSSL_ROOT_DIR
+    )
+  file(TO_CMAKE_PATH "$ENV{PROGRAMFILES}" _programfiles)
+  set(_OPENSSL_ROOT_PATHS
+    "${_programfiles}/OpenSSL"
+    "${_programfiles}/OpenSSL-Win32"
+    "${_programfiles}/OpenSSL-Win64"
+    "C:/OpenSSL/"
+    "C:/OpenSSL-Win32/"
+    "C:/OpenSSL-Win64/"
+    )
+  unset(_programfiles)
+else ()
+  set(_OPENSSL_ROOT_HINTS
+    ${OPENSSL_ROOT_DIR}
+    ENV OPENSSL_ROOT_DIR
+    )
+endif ()
+
+set(_OPENSSL_ROOT_HINTS_AND_PATHS
+    HINTS ${_OPENSSL_ROOT_HINTS}
+    PATHS ${_OPENSSL_ROOT_PATHS}
+    )
+
+find_path(OPENSSL_INCLUDE_DIR
+  NAMES
+    openssl/ssl.h
+  ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+  HINTS
+    ${_OPENSSL_INCLUDEDIR}
+  PATH_SUFFIXES
+    include
+)
+
+if(WIN32 AND NOT CYGWIN)
+  if(MSVC)
+    # /MD and /MDd are the standard values - if someone wants to use
+    # others, the libnames have to change here too
+    # use also ssl and ssleay32 in debug as fallback for openssl < 0.9.8b
+    # enable OPENSSL_MSVC_STATIC_RT to get the libs build /MT (Multithreaded no-DLL)
+    # In Visual C++ naming convention each of these four kinds of Windows libraries has it's standard suffix:
+    #   * MD for dynamic-release
+    #   * MDd for dynamic-debug
+    #   * MT for static-release
+    #   * MTd for static-debug
+
+    # Implementation details:
+    # We are using the libraries located in the VC subdir instead of the parent directory eventhough :
+    # libeay32MD.lib is identical to ../libeay32.lib, and
+    # ssleay32MD.lib is identical to ../ssleay32.lib
+    # enable OPENSSL_USE_STATIC_LIBS to use the static libs located in lib/VC/static
+
+    if (OPENSSL_MSVC_STATIC_RT)
+      set(_OPENSSL_MSVC_RT_MODE "MT")
+    else ()
+      set(_OPENSSL_MSVC_RT_MODE "MD")
+    endif ()
+
+    if(OPENSSL_USE_STATIC_LIBS)
+      set(_OPENSSL_PATH_SUFFIXES
+        "lib"
+        "VC/static"
+        "lib/VC/static"
+        )
+    else()
+      set(_OPENSSL_PATH_SUFFIXES
+        "lib"
+        "VC"
+        "lib/VC"
+        )
+    endif ()
+
+    find_library(LIB_EAY_DEBUG
+      NAMES
+        libeay32${_OPENSSL_MSVC_RT_MODE}d
+        libeay32d
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      PATH_SUFFIXES
+        ${_OPENSSL_PATH_SUFFIXES}
+    )
+
+    find_library(LIB_EAY_RELEASE
+      NAMES
+        libeay32${_OPENSSL_MSVC_RT_MODE}
+        libeay32
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      PATH_SUFFIXES
+        ${_OPENSSL_PATH_SUFFIXES}
+    )
+
+    find_library(SSL_EAY_DEBUG
+      NAMES
+        ssleay32${_OPENSSL_MSVC_RT_MODE}d
+        ssleay32d
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      PATH_SUFFIXES
+        ${_OPENSSL_PATH_SUFFIXES}
+    )
+
+    find_library(SSL_EAY_RELEASE
+      NAMES
+        ssleay32${_OPENSSL_MSVC_RT_MODE}
+        ssleay32
+        ssl
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      PATH_SUFFIXES
+        ${_OPENSSL_PATH_SUFFIXES}
+    )
+
+    set(LIB_EAY_LIBRARY_DEBUG "${LIB_EAY_DEBUG}")
+    set(LIB_EAY_LIBRARY_RELEASE "${LIB_EAY_RELEASE}")
+    set(SSL_EAY_LIBRARY_DEBUG "${SSL_EAY_DEBUG}")
+    set(SSL_EAY_LIBRARY_RELEASE "${SSL_EAY_RELEASE}")
+
+    include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+    select_library_configurations(LIB_EAY)
+    select_library_configurations(SSL_EAY)
+
+    mark_as_advanced(LIB_EAY_LIBRARY_DEBUG LIB_EAY_LIBRARY_RELEASE
+                     SSL_EAY_LIBRARY_DEBUG SSL_EAY_LIBRARY_RELEASE)
+    set(OPENSSL_SSL_LIBRARY ${SSL_EAY_LIBRARY} )
+    set(OPENSSL_CRYPTO_LIBRARY ${LIB_EAY_LIBRARY} )
+    set(OPENSSL_LIBRARIES ${SSL_EAY_LIBRARY} ${LIB_EAY_LIBRARY} )
+  elseif(MINGW)
+    # same player, for MinGW
+    set(LIB_EAY_NAMES crypto libeay32)
+    set(SSL_EAY_NAMES ssl ssleay32)
+    find_library(LIB_EAY
+      NAMES
+        ${LIB_EAY_NAMES}
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      PATH_SUFFIXES
+        "lib"
+        "lib/MinGW"
+    )
+
+    find_library(SSL_EAY
+      NAMES
+        ${SSL_EAY_NAMES}
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      PATH_SUFFIXES
+        "lib"
+        "lib/MinGW"
+    )
+
+    mark_as_advanced(SSL_EAY LIB_EAY)
+    set(OPENSSL_SSL_LIBRARY ${SSL_EAY} )
+    set(OPENSSL_CRYPTO_LIBRARY ${LIB_EAY} )
+    set(OPENSSL_LIBRARIES ${SSL_EAY} ${LIB_EAY} )
+    unset(LIB_EAY_NAMES)
+    unset(SSL_EAY_NAMES)
+  else()
+    # Not sure what to pick for -say- intel, let's use the toplevel ones and hope someone report issues:
+    find_library(LIB_EAY
+      NAMES
+        libeay32
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      HINTS
+        ${_OPENSSL_LIBDIR}
+      PATH_SUFFIXES
+        lib
+    )
+
+    find_library(SSL_EAY
+      NAMES
+        ssleay32
+      NAMES_PER_DIR
+      ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+      HINTS
+        ${_OPENSSL_LIBDIR}
+      PATH_SUFFIXES
+        lib
+    )
+
+    mark_as_advanced(SSL_EAY LIB_EAY)
+    set(OPENSSL_SSL_LIBRARY ${SSL_EAY} )
+    set(OPENSSL_CRYPTO_LIBRARY ${LIB_EAY} )
+    set(OPENSSL_LIBRARIES ${SSL_EAY} ${LIB_EAY} )
+  endif()
+else()
+
+  find_library(OPENSSL_SSL_LIBRARY
+    NAMES
+      ssl
+      ssleay32
+      ssleay32MD
+    NAMES_PER_DIR
+    ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+    HINTS
+      ${_OPENSSL_LIBDIR}
+    PATH_SUFFIXES
+      lib
+  )
+
+  find_library(OPENSSL_CRYPTO_LIBRARY
+    NAMES
+      crypto
+    NAMES_PER_DIR
+    ${_OPENSSL_ROOT_HINTS_AND_PATHS}
+    HINTS
+      ${_OPENSSL_LIBDIR}
+    PATH_SUFFIXES
+      lib
+  )
+
+  mark_as_advanced(OPENSSL_CRYPTO_LIBRARY OPENSSL_SSL_LIBRARY)
+
+  # compat defines
+  set(OPENSSL_SSL_LIBRARIES ${OPENSSL_SSL_LIBRARY})
+  set(OPENSSL_CRYPTO_LIBRARIES ${OPENSSL_CRYPTO_LIBRARY})
+
+  set(OPENSSL_LIBRARIES ${OPENSSL_SSL_LIBRARY} ${OPENSSL_CRYPTO_LIBRARY})
+
+endif()
+
+function(from_hex HEX DEC)
+  string(TOUPPER "${HEX}" HEX)
+  set(_res 0)
+  string(LENGTH "${HEX}" _strlen)
+
+  while (_strlen GREATER 0)
+    math(EXPR _res "${_res} * 16")
+    string(SUBSTRING "${HEX}" 0 1 NIBBLE)
+    string(SUBSTRING "${HEX}" 1 -1 HEX)
+    if (NIBBLE STREQUAL "A")
+      math(EXPR _res "${_res} + 10")
+    elseif (NIBBLE STREQUAL "B")
+      math(EXPR _res "${_res} + 11")
+    elseif (NIBBLE STREQUAL "C")
+      math(EXPR _res "${_res} + 12")
+    elseif (NIBBLE STREQUAL "D")
+      math(EXPR _res "${_res} + 13")
+    elseif (NIBBLE STREQUAL "E")
+      math(EXPR _res "${_res} + 14")
+    elseif (NIBBLE STREQUAL "F")
+      math(EXPR _res "${_res} + 15")
+    else()
+      math(EXPR _res "${_res} + ${NIBBLE}")
+    endif()
+
+    string(LENGTH "${HEX}" _strlen)
+  endwhile()
+
+  set(${DEC} ${_res} PARENT_SCOPE)
+endfunction()
+
+if (OPENSSL_INCLUDE_DIR)
+  if(OPENSSL_INCLUDE_DIR AND EXISTS "${OPENSSL_INCLUDE_DIR}/openssl/opensslv.h")
+    file(STRINGS "${OPENSSL_INCLUDE_DIR}/openssl/opensslv.h" openssl_version_str
+         REGEX "^#[\t ]*define[\t ]+OPENSSL_VERSION_NUMBER[\t ]+0x([0-9a-fA-F])+.*")
+
+    # The version number is encoded as 0xMNNFFPPS: major minor fix patch status
+    # The status gives if this is a developer or prerelease and is ignored here.
+    # Major, minor, and fix directly translate into the version numbers shown in
+    # the string. The patch field translates to the single character suffix that
+    # indicates the bug fix state, which 00 -> nothing, 01 -> a, 02 -> b and so
+    # on.
+
+    string(REGEX REPLACE "^.*OPENSSL_VERSION_NUMBER[\t ]+0x([0-9a-fA-F])([0-9a-fA-F][0-9a-fA-F])([0-9a-fA-F][0-9a-fA-F])([0-9a-fA-F][0-9a-fA-F])([0-9a-fA-F]).*$"
+           "\\1;\\2;\\3;\\4;\\5" OPENSSL_VERSION_LIST "${openssl_version_str}")
+    list(GET OPENSSL_VERSION_LIST 0 OPENSSL_VERSION_MAJOR)
+    list(GET OPENSSL_VERSION_LIST 1 OPENSSL_VERSION_MINOR)
+    from_hex("${OPENSSL_VERSION_MINOR}" OPENSSL_VERSION_MINOR)
+    list(GET OPENSSL_VERSION_LIST 2 OPENSSL_VERSION_FIX)
+    from_hex("${OPENSSL_VERSION_FIX}" OPENSSL_VERSION_FIX)
+    list(GET OPENSSL_VERSION_LIST 3 OPENSSL_VERSION_PATCH)
+
+    if (NOT OPENSSL_VERSION_PATCH STREQUAL "00")
+      from_hex("${OPENSSL_VERSION_PATCH}" _tmp)
+      # 96 is the ASCII code of 'a' minus 1
+      math(EXPR OPENSSL_VERSION_PATCH_ASCII "${_tmp} + 96")
+      unset(_tmp)
+      # Once anyone knows how OpenSSL would call the patch versions beyond 'z'
+      # this should be updated to handle that, too. This has not happened yet
+      # so it is simply ignored here for now.
+      string(ASCII "${OPENSSL_VERSION_PATCH_ASCII}" OPENSSL_VERSION_PATCH_STRING)
+    endif ()
+
+    set(OPENSSL_VERSION "${OPENSSL_VERSION_MAJOR}.${OPENSSL_VERSION_MINOR}.${OPENSSL_VERSION_FIX}${OPENSSL_VERSION_PATCH_STRING}")
+  endif ()
+endif ()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+if (OPENSSL_VERSION)
+  find_package_handle_standard_args(OpenSSL
+    REQUIRED_VARS
+      OPENSSL_LIBRARIES
+      OPENSSL_INCLUDE_DIR
+    VERSION_VAR
+      OPENSSL_VERSION
+    FAIL_MESSAGE
+      "Could NOT find OpenSSL, try to set the path to OpenSSL root folder in the system variable OPENSSL_ROOT_DIR"
+  )
+else ()
+  find_package_handle_standard_args(OpenSSL "Could NOT find OpenSSL, try to set the path to OpenSSL root folder in the system variable OPENSSL_ROOT_DIR"
+    OPENSSL_LIBRARIES
+    OPENSSL_INCLUDE_DIR
+  )
+endif ()
+
+mark_as_advanced(OPENSSL_INCLUDE_DIR OPENSSL_LIBRARIES)
+
+if(OPENSSL_FOUND)
+  if(NOT TARGET OpenSSL::Crypto AND
+      (EXISTS "${OPENSSL_CRYPTO_LIBRARY}" OR
+        EXISTS "${LIB_EAY_LIBRARY_DEBUG}" OR
+        EXISTS "${LIB_EAY_LIBRARY_RELEASE}")
+      )
+    add_library(OpenSSL::Crypto UNKNOWN IMPORTED)
+    set_target_properties(OpenSSL::Crypto PROPERTIES
+      INTERFACE_INCLUDE_DIRECTORIES "${OPENSSL_INCLUDE_DIR}")
+    if(EXISTS "${OPENSSL_CRYPTO_LIBRARY}")
+      set_target_properties(OpenSSL::Crypto PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES "C"
+        IMPORTED_LOCATION "${OPENSSL_CRYPTO_LIBRARY}")
+    endif()
+    if(EXISTS "${LIB_EAY_LIBRARY_DEBUG}")
+      set_property(TARGET OpenSSL::Crypto APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS DEBUG)
+      set_target_properties(OpenSSL::Crypto PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "C"
+        IMPORTED_LOCATION_DEBUG "${LIB_EAY_LIBRARY_DEBUG}")
+    endif()
+    if(EXISTS "${LIB_EAY_LIBRARY_RELEASE}")
+      set_property(TARGET OpenSSL::Crypto APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS RELEASE)
+      set_target_properties(OpenSSL::Crypto PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "C"
+        IMPORTED_LOCATION_RELEASE "${LIB_EAY_LIBRARY_RELEASE}")
+    endif()
+  endif()
+  if(NOT TARGET OpenSSL::SSL AND
+      (EXISTS "${OPENSSL_SSL_LIBRARY}" OR
+        EXISTS "${SSL_EAY_LIBRARY_DEBUG}" OR
+        EXISTS "${SSL_EAY_LIBRARY_RELEASE}")
+      )
+    add_library(OpenSSL::SSL UNKNOWN IMPORTED)
+    set_target_properties(OpenSSL::SSL PROPERTIES
+      INTERFACE_INCLUDE_DIRECTORIES "${OPENSSL_INCLUDE_DIR}")
+    if(EXISTS "${OPENSSL_SSL_LIBRARY}")
+      set_target_properties(OpenSSL::SSL PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES "C"
+        IMPORTED_LOCATION "${OPENSSL_SSL_LIBRARY}")
+    endif()
+    if(EXISTS "${SSL_EAY_LIBRARY_DEBUG}")
+      set_property(TARGET OpenSSL::SSL APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS DEBUG)
+      set_target_properties(OpenSSL::SSL PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "C"
+        IMPORTED_LOCATION_DEBUG "${SSL_EAY_LIBRARY_DEBUG}")
+    endif()
+    if(EXISTS "${SSL_EAY_LIBRARY_RELEASE}")
+      set_property(TARGET OpenSSL::SSL APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS RELEASE)
+      set_target_properties(OpenSSL::SSL PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "C"
+        IMPORTED_LOCATION_RELEASE "${SSL_EAY_LIBRARY_RELEASE}")
+    endif()
+    if(TARGET OpenSSL::Crypto)
+      set_target_properties(OpenSSL::SSL PROPERTIES
+        INTERFACE_LINK_LIBRARIES OpenSSL::Crypto)
+    endif()
+  endif()
+endif()
+
+# Restore the original find library ordering
+if(OPENSSL_USE_STATIC_LIBS)
+  set(CMAKE_FIND_LIBRARY_SUFFIXES ${_openssl_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
+endif()
diff --git a/share/cmake-3.2/Modules/FindOpenSceneGraph.cmake b/share/cmake-3.6/Modules/FindOpenSceneGraph.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindOpenSceneGraph.cmake
rename to share/cmake-3.6/Modules/FindOpenSceneGraph.cmake
diff --git a/share/cmake-3.2/Modules/FindOpenThreads.cmake b/share/cmake-3.6/Modules/FindOpenThreads.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindOpenThreads.cmake
rename to share/cmake-3.6/Modules/FindOpenThreads.cmake
diff --git a/share/cmake-3.2/Modules/FindPHP4.cmake b/share/cmake-3.6/Modules/FindPHP4.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindPHP4.cmake
rename to share/cmake-3.6/Modules/FindPHP4.cmake
diff --git a/share/cmake-3.6/Modules/FindPNG.cmake b/share/cmake-3.6/Modules/FindPNG.cmake
new file mode 100644
index 0000000..5050d91
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindPNG.cmake
@@ -0,0 +1,161 @@
+#.rst:
+# FindPNG
+# -------
+#
+# Find libpng, the official reference library for the PNG image format.
+#
+# Imported targets
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines the following :prop_tgt:`IMPORTED` target:
+#
+# ``PNG::PNG``
+#   The libpng library, if found.
+#
+# Result variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module will set the following variables in your project:
+#
+# ``PNG_INCLUDE_DIRS``
+#   where to find png.h, etc.
+# ``PNG_LIBRARIES``
+#   the libraries to link against to use PNG.
+# ``PNG_DEFINITIONS``
+#   You should add_definitons(${PNG_DEFINITIONS}) before compiling code
+#   that includes png library files.
+# ``PNG_FOUND``
+#   If false, do not try to use PNG.
+# ``PNG_VERSION_STRING``
+#   the version of the PNG library found (since CMake 2.8.8)
+#
+# Obsolete variables
+# ^^^^^^^^^^^^^^^^^^
+#
+# The following variables may also be set, for backwards compatibility:
+#
+# ``PNG_LIBRARY``
+#   where to find the PNG library.
+# ``PNG_INCLUDE_DIR``
+#   where to find the PNG headers (same as PNG_INCLUDE_DIRS)
+#
+# Since PNG depends on the ZLib compression library, none of the above
+# will be defined unless ZLib can be found.
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+# Copyright 2016 Raumfeld
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(PNG_FIND_QUIETLY)
+  set(_FIND_ZLIB_ARG QUIET)
+endif()
+find_package(ZLIB ${_FIND_ZLIB_ARG})
+
+if(ZLIB_FOUND)
+  find_path(PNG_PNG_INCLUDE_DIR png.h
+  /usr/local/include/libpng             # OpenBSD
+  )
+
+  list(APPEND PNG_NAMES png libpng)
+  unset(PNG_NAMES_DEBUG)
+  set(_PNG_VERSION_SUFFIXES 17 16 15 14 12)
+  if (PNG_FIND_VERSION MATCHES "^([0-9]+)\\.([0-9]+)(\\..*)?$")
+    set(_PNG_VERSION_SUFFIX_MIN "${CMAKE_MATCH_1}${CMAKE_MATCH_2}")
+    if (PNG_FIND_VERSION_EXACT)
+      set(_PNG_VERSION_SUFFIXES ${_PNG_VERSION_SUFFIX_MIN})
+    else ()
+      string(REGEX REPLACE
+          "${_PNG_VERSION_SUFFIX_MIN}.*" "${_PNG_VERSION_SUFFIX_MIN}"
+          _PNG_VERSION_SUFFIXES "${_PNG_VERSION_SUFFIXES}")
+    endif ()
+    unset(_PNG_VERSION_SUFFIX_MIN)
+  endif ()
+  foreach(v IN LISTS _PNG_VERSION_SUFFIXES)
+    list(APPEND PNG_NAMES png${v} libpng${v})
+    list(APPEND PNG_NAMES_DEBUG png${v}d libpng${v}d)
+  endforeach()
+  unset(_PNG_VERSION_SUFFIXES)
+  # For compatibility with versions prior to this multi-config search, honor
+  # any PNG_LIBRARY that is already specified and skip the search.
+  if(NOT PNG_LIBRARY)
+    find_library(PNG_LIBRARY_RELEASE NAMES ${PNG_NAMES})
+    find_library(PNG_LIBRARY_DEBUG NAMES ${PNG_NAMES_DEBUG})
+    include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+    select_library_configurations(PNG)
+    mark_as_advanced(PNG_LIBRARY_RELEASE PNG_LIBRARY_DEBUG)
+  endif()
+  unset(PNG_NAMES)
+  unset(PNG_NAMES_DEBUG)
+
+  # Set by select_library_configurations(), but we want the one from
+  # find_package_handle_standard_args() below.
+  unset(PNG_FOUND)
+
+  if (PNG_LIBRARY AND PNG_PNG_INCLUDE_DIR)
+      # png.h includes zlib.h. Sigh.
+      set(PNG_INCLUDE_DIRS ${PNG_PNG_INCLUDE_DIR} ${ZLIB_INCLUDE_DIR} )
+      set(PNG_INCLUDE_DIR ${PNG_INCLUDE_DIRS} ) # for backward compatibility
+      set(PNG_LIBRARIES ${PNG_LIBRARY} ${ZLIB_LIBRARY})
+
+      if (CYGWIN)
+        if(BUILD_SHARED_LIBS)
+           # No need to define PNG_USE_DLL here, because it's default for Cygwin.
+        else()
+          set (PNG_DEFINITIONS -DPNG_STATIC)
+        endif()
+      endif ()
+
+      if(NOT TARGET PNG::PNG)
+        add_library(PNG::PNG UNKNOWN IMPORTED)
+        set_target_properties(PNG::PNG PROPERTIES
+          INTERFACE_COMPILE_DEFINITIONS "${PNG_DEFINITIONS}"
+          INTERFACE_INCLUDE_DIRECTORIES "${PNG_INCLUDE_DIRS}"
+          INTERFACE_LINK_LIBRARIES ZLIB::ZLIB)
+        if(EXISTS "${PNG_LIBRARY}")
+          set_target_properties(PNG::PNG PROPERTIES
+            IMPORTED_LINK_INTERFACE_LANGUAGES "C"
+            IMPORTED_LOCATION "${PNG_LIBRARY}")
+        endif()
+        if(EXISTS "${PNG_LIBRARY_DEBUG}")
+          set_property(TARGET PNG::PNG APPEND PROPERTY
+            IMPORTED_CONFIGURATIONS DEBUG)
+          set_target_properties(PNG::PNG PROPERTIES
+            IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "C"
+            IMPORTED_LOCATION_DEBUG "${PNG_LIBRARY_DEBUG}")
+        endif()
+        if(EXISTS "${PNG_LIBRARY_RELEASE}")
+          set_property(TARGET PNG::PNG APPEND PROPERTY
+            IMPORTED_CONFIGURATIONS RELEASE)
+          set_target_properties(PNG::PNG PROPERTIES
+            IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "C"
+            IMPORTED_LOCATION_RELEASE "${PNG_LIBRARY_RELEASE}")
+        endif()
+      endif()
+  endif ()
+
+  if (PNG_PNG_INCLUDE_DIR AND EXISTS "${PNG_PNG_INCLUDE_DIR}/png.h")
+      file(STRINGS "${PNG_PNG_INCLUDE_DIR}/png.h" png_version_str REGEX "^#define[ \t]+PNG_LIBPNG_VER_STRING[ \t]+\".+\"")
+
+      string(REGEX REPLACE "^#define[ \t]+PNG_LIBPNG_VER_STRING[ \t]+\"([^\"]+)\".*" "\\1" PNG_VERSION_STRING "${png_version_str}")
+      unset(png_version_str)
+  endif ()
+endif()
+
+# handle the QUIETLY and REQUIRED arguments and set PNG_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(PNG
+                                  REQUIRED_VARS PNG_LIBRARY PNG_PNG_INCLUDE_DIR
+                                  VERSION_VAR PNG_VERSION_STRING)
+
+mark_as_advanced(PNG_PNG_INCLUDE_DIR PNG_LIBRARY )
diff --git a/share/cmake-3.6/Modules/FindPackageHandleStandardArgs.cmake b/share/cmake-3.6/Modules/FindPackageHandleStandardArgs.cmake
new file mode 100644
index 0000000..fe2dbea
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindPackageHandleStandardArgs.cmake
@@ -0,0 +1,396 @@
+#[=======================================================================[.rst:
+FindPackageHandleStandardArgs
+-----------------------------
+
+This module provides a function intended to be used in :ref:`Find Modules`
+implementing :command:`find_package(<PackageName>)` calls.  It handles the
+``REQUIRED``, ``QUIET`` and version-related arguments of ``find_package``.
+It also sets the ``<PackageName>_FOUND`` variable.  The package is
+considered found if all variables listed contain valid results, e.g.
+valid filepaths.
+
+.. command:: find_package_handle_standard_args
+
+  There are two signatures::
+
+    find_package_handle_standard_args(<PackageName>
+      (DEFAULT_MSG|<custom-failure-message>)
+      <required-var>...
+      )
+
+    find_package_handle_standard_args(<PackageName>
+      [FOUND_VAR <result-var>]
+      [REQUIRED_VARS <required-var>...]
+      [VERSION_VAR <version-var>]
+      [HANDLE_COMPONENTS]
+      [CONFIG_MODE]
+      [FAIL_MESSAGE <custom-failure-message>]
+      )
+
+  The ``<PackageName>_FOUND`` variable will be set to ``TRUE`` if all
+  the variables ``<required-var>...`` are valid and any optional
+  constraints are satisfied, and ``FALSE`` otherwise.  A success or
+  failure message may be displayed based on the results and on
+  whether the ``REQUIRED`` and/or ``QUIET`` option was given to
+  the :command:`find_package` call.
+
+  The options are:
+
+  ``(DEFAULT_MSG|<custom-failure-message>)``
+    In the simple signature this specifies the failure message.
+    Use ``DEFAULT_MSG`` to ask for a default message to be computed
+    (recommended).  Not valid in the full signature.
+
+  ``FOUND_VAR <result-var>``
+    Obsolete.  Specifies either ``<PackageName>_FOUND`` or
+    ``<PACKAGENAME>_FOUND`` as the result variable.  This exists only
+    for compatibility with older versions of CMake and is now ignored.
+    Result variables of both names are always set for compatibility.
+
+  ``REQUIRED_VARS <required-var>...``
+    Specify the variables which are required for this package.
+    These may be named in the generated failure message asking the
+    user to set the missing variable values.  Therefore these should
+    typically be cache entries such as ``FOO_LIBRARY`` and not output
+    variables like ``FOO_LIBRARIES``.
+
+  ``VERSION_VAR <version-var>``
+    Specify the name of a variable that holds the version of the package
+    that has been found.  This version will be checked against the
+    (potentially) specified required version given to the
+    :command:`find_package` call, including its ``EXACT`` option.
+    The default messages include information about the required
+    version and the version which has been actually found, both
+    if the version is ok or not.
+
+  ``HANDLE_COMPONENTS``
+    Enable handling of package components.  In this case, the command
+    will report which components have been found and which are missing,
+    and the ``<PackageName>_FOUND`` variable will be set to ``FALSE``
+    if any of the required components (i.e. not the ones listed after
+    the ``OPTIONAL_COMPONENTS`` option of :command:`find_package`) are
+    missing.
+
+  ``CONFIG_MODE``
+    Specify that the calling find module is a wrapper around a
+    call to ``find_package(<PackageName> NO_MODULE)``.  This implies
+    a ``VERSION_VAR`` value of ``<PackageName>_VERSION``.  The command
+    will automatically check whether the package configuration file
+    was found.
+
+  ``FAIL_MESSAGE <custom-failure-message>``
+    Specify a custom failure message instead of using the default
+    generated message.  Not recommended.
+
+Example for the simple signature:
+
+.. code-block:: cmake
+
+  find_package_handle_standard_args(LibXml2 DEFAULT_MSG
+    LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
+
+The ``LibXml2`` package is considered to be found if both
+``LIBXML2_LIBRARY`` and ``LIBXML2_INCLUDE_DIR`` are valid.
+Then also ``LibXml2_FOUND`` is set to ``TRUE``.  If it is not found
+and ``REQUIRED`` was used, it fails with a
+:command:`message(FATAL_ERROR)`, independent whether ``QUIET`` was
+used or not.  If it is found, success will be reported, including
+the content of the first ``<required-var>``.  On repeated CMake runs,
+the same message will not be printed again.
+
+Example for the full signature:
+
+.. code-block:: cmake
+
+  find_package_handle_standard_args(LibArchive
+    REQUIRED_VARS LibArchive_LIBRARY LibArchive_INCLUDE_DIR
+    VERSION_VAR LibArchive_VERSION)
+
+In this case, the ``LibArchive`` package is considered to be found if
+both ``LibArchive_LIBRARY`` and ``LibArchive_INCLUDE_DIR`` are valid.
+Also the version of ``LibArchive`` will be checked by using the version
+contained in ``LibArchive_VERSION``.  Since no ``FAIL_MESSAGE`` is given,
+the default messages will be printed.
+
+Another example for the full signature:
+
+.. code-block:: cmake
+
+  find_package(Automoc4 QUIET NO_MODULE HINTS /opt/automoc4)
+  find_package_handle_standard_args(Automoc4  CONFIG_MODE)
+
+In this case, a ``FindAutmoc4.cmake`` module wraps a call to
+``find_package(Automoc4 NO_MODULE)`` and adds an additional search
+directory for ``automoc4``.  Then the call to
+``find_package_handle_standard_args`` produces a proper success/failure
+message.
+#]=======================================================================]
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageMessage.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
+
+# internal helper macro
+macro(_FPHSA_FAILURE_MESSAGE _msg)
+  if (${_NAME}_FIND_REQUIRED)
+    message(FATAL_ERROR "${_msg}")
+  else ()
+    if (NOT ${_NAME}_FIND_QUIETLY)
+      message(STATUS "${_msg}")
+    endif ()
+  endif ()
+endmacro()
+
+
+# internal helper macro to generate the failure message when used in CONFIG_MODE:
+macro(_FPHSA_HANDLE_FAILURE_CONFIG_MODE)
+  # <name>_CONFIG is set, but FOUND is false, this means that some other of the REQUIRED_VARS was not found:
+  if(${_NAME}_CONFIG)
+    _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: missing: ${MISSING_VARS} (found ${${_NAME}_CONFIG} ${VERSION_MSG})")
+  else()
+    # If _CONSIDERED_CONFIGS is set, the config-file has been found, but no suitable version.
+    # List them all in the error message:
+    if(${_NAME}_CONSIDERED_CONFIGS)
+      set(configsText "")
+      list(LENGTH ${_NAME}_CONSIDERED_CONFIGS configsCount)
+      math(EXPR configsCount "${configsCount} - 1")
+      foreach(currentConfigIndex RANGE ${configsCount})
+        list(GET ${_NAME}_CONSIDERED_CONFIGS ${currentConfigIndex} filename)
+        list(GET ${_NAME}_CONSIDERED_VERSIONS ${currentConfigIndex} version)
+        set(configsText "${configsText}    ${filename} (version ${version})\n")
+      endforeach()
+      if (${_NAME}_NOT_FOUND_MESSAGE)
+        set(configsText "${configsText}    Reason given by package: ${${_NAME}_NOT_FOUND_MESSAGE}\n")
+      endif()
+      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} ${VERSION_MSG}, checked the following files:\n${configsText}")
+
+    else()
+      # Simple case: No Config-file was found at all:
+      _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: found neither ${_NAME}Config.cmake nor ${_NAME_LOWER}-config.cmake ${VERSION_MSG}")
+    endif()
+  endif()
+endmacro()
+
+
+function(FIND_PACKAGE_HANDLE_STANDARD_ARGS _NAME _FIRST_ARG)
+
+# set up the arguments for CMAKE_PARSE_ARGUMENTS and check whether we are in
+# new extended or in the "old" mode:
+  set(options  CONFIG_MODE  HANDLE_COMPONENTS)
+  set(oneValueArgs  FAIL_MESSAGE  VERSION_VAR  FOUND_VAR)
+  set(multiValueArgs REQUIRED_VARS)
+  set(_KEYWORDS_FOR_EXTENDED_MODE  ${options} ${oneValueArgs} ${multiValueArgs} )
+  list(FIND _KEYWORDS_FOR_EXTENDED_MODE "${_FIRST_ARG}" INDEX)
+
+  if(${INDEX} EQUAL -1)
+    set(FPHSA_FAIL_MESSAGE ${_FIRST_ARG})
+    set(FPHSA_REQUIRED_VARS ${ARGN})
+    set(FPHSA_VERSION_VAR)
+  else()
+
+    CMAKE_PARSE_ARGUMENTS(FPHSA "${options}" "${oneValueArgs}" "${multiValueArgs}"  ${_FIRST_ARG} ${ARGN})
+
+    if(FPHSA_UNPARSED_ARGUMENTS)
+      message(FATAL_ERROR "Unknown keywords given to FIND_PACKAGE_HANDLE_STANDARD_ARGS(): \"${FPHSA_UNPARSED_ARGUMENTS}\"")
+    endif()
+
+    if(NOT FPHSA_FAIL_MESSAGE)
+      set(FPHSA_FAIL_MESSAGE  "DEFAULT_MSG")
+    endif()
+  endif()
+
+# now that we collected all arguments, process them
+
+  if("x${FPHSA_FAIL_MESSAGE}" STREQUAL "xDEFAULT_MSG")
+    set(FPHSA_FAIL_MESSAGE "Could NOT find ${_NAME}")
+  endif()
+
+  # In config-mode, we rely on the variable <package>_CONFIG, which is set by find_package()
+  # when it successfully found the config-file, including version checking:
+  if(FPHSA_CONFIG_MODE)
+    list(INSERT FPHSA_REQUIRED_VARS 0 ${_NAME}_CONFIG)
+    list(REMOVE_DUPLICATES FPHSA_REQUIRED_VARS)
+    set(FPHSA_VERSION_VAR ${_NAME}_VERSION)
+  endif()
+
+  if(NOT FPHSA_REQUIRED_VARS)
+    message(FATAL_ERROR "No REQUIRED_VARS specified for FIND_PACKAGE_HANDLE_STANDARD_ARGS()")
+  endif()
+
+  list(GET FPHSA_REQUIRED_VARS 0 _FIRST_REQUIRED_VAR)
+
+  string(TOUPPER ${_NAME} _NAME_UPPER)
+  string(TOLOWER ${_NAME} _NAME_LOWER)
+
+  if(FPHSA_FOUND_VAR)
+    if(FPHSA_FOUND_VAR MATCHES "^${_NAME}_FOUND$"  OR  FPHSA_FOUND_VAR MATCHES "^${_NAME_UPPER}_FOUND$")
+      set(_FOUND_VAR ${FPHSA_FOUND_VAR})
+    else()
+      message(FATAL_ERROR "The argument for FOUND_VAR is \"${FPHSA_FOUND_VAR}\", but only \"${_NAME}_FOUND\" and \"${_NAME_UPPER}_FOUND\" are valid names.")
+    endif()
+  else()
+    set(_FOUND_VAR ${_NAME_UPPER}_FOUND)
+  endif()
+
+  # collect all variables which were not found, so they can be printed, so the
+  # user knows better what went wrong (#6375)
+  set(MISSING_VARS "")
+  set(DETAILS "")
+  # check if all passed variables are valid
+  set(FPHSA_FOUND_${_NAME} TRUE)
+  foreach(_CURRENT_VAR ${FPHSA_REQUIRED_VARS})
+    if(NOT ${_CURRENT_VAR})
+      set(FPHSA_FOUND_${_NAME} FALSE)
+      set(MISSING_VARS "${MISSING_VARS} ${_CURRENT_VAR}")
+    else()
+      set(DETAILS "${DETAILS}[${${_CURRENT_VAR}}]")
+    endif()
+  endforeach()
+  if(FPHSA_FOUND_${_NAME})
+    set(${_NAME}_FOUND TRUE)
+    set(${_NAME_UPPER}_FOUND TRUE)
+  else()
+    set(${_NAME}_FOUND FALSE)
+    set(${_NAME_UPPER}_FOUND FALSE)
+  endif()
+
+  # component handling
+  unset(FOUND_COMPONENTS_MSG)
+  unset(MISSING_COMPONENTS_MSG)
+
+  if(FPHSA_HANDLE_COMPONENTS)
+    foreach(comp ${${_NAME}_FIND_COMPONENTS})
+      if(${_NAME}_${comp}_FOUND)
+
+        if(NOT DEFINED FOUND_COMPONENTS_MSG)
+          set(FOUND_COMPONENTS_MSG "found components: ")
+        endif()
+        set(FOUND_COMPONENTS_MSG "${FOUND_COMPONENTS_MSG} ${comp}")
+
+      else()
+
+        if(NOT DEFINED MISSING_COMPONENTS_MSG)
+          set(MISSING_COMPONENTS_MSG "missing components: ")
+        endif()
+        set(MISSING_COMPONENTS_MSG "${MISSING_COMPONENTS_MSG} ${comp}")
+
+        if(${_NAME}_FIND_REQUIRED_${comp})
+          set(${_NAME}_FOUND FALSE)
+          set(MISSING_VARS "${MISSING_VARS} ${comp}")
+        endif()
+
+      endif()
+    endforeach()
+    set(COMPONENT_MSG "${FOUND_COMPONENTS_MSG} ${MISSING_COMPONENTS_MSG}")
+    set(DETAILS "${DETAILS}[c${COMPONENT_MSG}]")
+  endif()
+
+  # version handling:
+  set(VERSION_MSG "")
+  set(VERSION_OK TRUE)
+  set(VERSION ${${FPHSA_VERSION_VAR}})
+
+  # check with DEFINED here as the requested or found version may be "0"
+  if (DEFINED ${_NAME}_FIND_VERSION)
+    if(DEFINED ${FPHSA_VERSION_VAR})
+
+      if(${_NAME}_FIND_VERSION_EXACT)       # exact version required
+        # count the dots in the version string
+        string(REGEX REPLACE "[^.]" "" _VERSION_DOTS "${VERSION}")
+        # add one dot because there is one dot more than there are components
+        string(LENGTH "${_VERSION_DOTS}." _VERSION_DOTS)
+        if (_VERSION_DOTS GREATER ${_NAME}_FIND_VERSION_COUNT)
+          # Because of the C++ implementation of find_package() ${_NAME}_FIND_VERSION_COUNT
+          # is at most 4 here. Therefore a simple lookup table is used.
+          if (${_NAME}_FIND_VERSION_COUNT EQUAL 1)
+            set(_VERSION_REGEX "[^.]*")
+          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 2)
+            set(_VERSION_REGEX "[^.]*\\.[^.]*")
+          elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 3)
+            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*")
+          else ()
+            set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*\\.[^.]*")
+          endif ()
+          string(REGEX REPLACE "^(${_VERSION_REGEX})\\..*" "\\1" _VERSION_HEAD "${VERSION}")
+          unset(_VERSION_REGEX)
+          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL _VERSION_HEAD)
+            set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
+            set(VERSION_OK FALSE)
+          else ()
+            set(VERSION_MSG "(found suitable exact version \"${VERSION}\")")
+          endif ()
+          unset(_VERSION_HEAD)
+        else ()
+          if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL VERSION)
+            set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
+            set(VERSION_OK FALSE)
+          else ()
+            set(VERSION_MSG "(found suitable exact version \"${VERSION}\")")
+          endif ()
+        endif ()
+        unset(_VERSION_DOTS)
+
+      else()     # minimum version specified:
+        if (${_NAME}_FIND_VERSION VERSION_GREATER VERSION)
+          set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is at least \"${${_NAME}_FIND_VERSION}\"")
+          set(VERSION_OK FALSE)
+        else ()
+          set(VERSION_MSG "(found suitable version \"${VERSION}\", minimum required is \"${${_NAME}_FIND_VERSION}\")")
+        endif ()
+      endif()
+
+    else()
+
+      # if the package was not found, but a version was given, add that to the output:
+      if(${_NAME}_FIND_VERSION_EXACT)
+         set(VERSION_MSG "(Required is exact version \"${${_NAME}_FIND_VERSION}\")")
+      else()
+         set(VERSION_MSG "(Required is at least version \"${${_NAME}_FIND_VERSION}\")")
+      endif()
+
+    endif()
+  else ()
+    if(VERSION)
+      set(VERSION_MSG "(found version \"${VERSION}\")")
+    endif()
+  endif ()
+
+  if(VERSION_OK)
+    set(DETAILS "${DETAILS}[v${VERSION}(${${_NAME}_FIND_VERSION})]")
+  else()
+    set(${_NAME}_FOUND FALSE)
+  endif()
+
+
+  # print the result:
+  if (${_NAME}_FOUND)
+    FIND_PACKAGE_MESSAGE(${_NAME} "Found ${_NAME}: ${${_FIRST_REQUIRED_VAR}} ${VERSION_MSG} ${COMPONENT_MSG}" "${DETAILS}")
+  else ()
+
+    if(FPHSA_CONFIG_MODE)
+      _FPHSA_HANDLE_FAILURE_CONFIG_MODE()
+    else()
+      if(NOT VERSION_OK)
+        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: ${VERSION_MSG} (found ${${_FIRST_REQUIRED_VAR}})")
+      else()
+        _FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} (missing: ${MISSING_VARS}) ${VERSION_MSG}")
+      endif()
+    endif()
+
+  endif ()
+
+  set(${_NAME}_FOUND ${${_NAME}_FOUND} PARENT_SCOPE)
+  set(${_NAME_UPPER}_FOUND ${${_NAME}_FOUND} PARENT_SCOPE)
+endfunction()
diff --git a/share/cmake-3.2/Modules/FindPackageMessage.cmake b/share/cmake-3.6/Modules/FindPackageMessage.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindPackageMessage.cmake
rename to share/cmake-3.6/Modules/FindPackageMessage.cmake
diff --git a/share/cmake-3.2/Modules/FindPerl.cmake b/share/cmake-3.6/Modules/FindPerl.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindPerl.cmake
rename to share/cmake-3.6/Modules/FindPerl.cmake
diff --git a/share/cmake-3.2/Modules/FindPerlLibs.cmake b/share/cmake-3.6/Modules/FindPerlLibs.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindPerlLibs.cmake
rename to share/cmake-3.6/Modules/FindPerlLibs.cmake
diff --git a/share/cmake-3.2/Modules/FindPhysFS.cmake b/share/cmake-3.6/Modules/FindPhysFS.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindPhysFS.cmake
rename to share/cmake-3.6/Modules/FindPhysFS.cmake
diff --git a/share/cmake-3.2/Modules/FindPike.cmake b/share/cmake-3.6/Modules/FindPike.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindPike.cmake
rename to share/cmake-3.6/Modules/FindPike.cmake
diff --git a/share/cmake-3.6/Modules/FindPkgConfig.cmake b/share/cmake-3.6/Modules/FindPkgConfig.cmake
new file mode 100644
index 0000000..644687c
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindPkgConfig.cmake
@@ -0,0 +1,674 @@
+#.rst:
+# FindPkgConfig
+# -------------
+#
+# A `pkg-config` module for CMake.
+#
+# Finds the ``pkg-config`` executable and add the
+# :command:`pkg_check_modules` and :command:`pkg_search_module`
+# commands.
+#
+# In order to find the ``pkg-config`` executable, it uses the
+# :variable:`PKG_CONFIG_EXECUTABLE` variable or the ``PKG_CONFIG``
+# environment variable first.
+
+#=============================================================================
+# Copyright 2006-2014 Kitware, Inc.
+# Copyright 2014      Christoph Grüninger <foss@grueninger.de>
+# Copyright 2006      Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
+# Copyright 2016      Rolf Eike Beer <eike@sf-mail.de>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+### Common stuff ####
+set(PKG_CONFIG_VERSION 1)
+
+# find pkg-config, use PKG_CONFIG if set
+if((NOT PKG_CONFIG_EXECUTABLE) AND (NOT "$ENV{PKG_CONFIG}" STREQUAL ""))
+  set(PKG_CONFIG_EXECUTABLE "$ENV{PKG_CONFIG}" CACHE FILEPATH "pkg-config executable")
+endif()
+find_program(PKG_CONFIG_EXECUTABLE NAMES pkg-config DOC "pkg-config executable")
+mark_as_advanced(PKG_CONFIG_EXECUTABLE)
+
+if (PKG_CONFIG_EXECUTABLE)
+  execute_process(COMMAND ${PKG_CONFIG_EXECUTABLE} --version
+    OUTPUT_VARIABLE PKG_CONFIG_VERSION_STRING
+    ERROR_QUIET
+    OUTPUT_STRIP_TRAILING_WHITESPACE)
+endif ()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(PkgConfig
+                                  REQUIRED_VARS PKG_CONFIG_EXECUTABLE
+                                  VERSION_VAR PKG_CONFIG_VERSION_STRING)
+
+# This is needed because the module name is "PkgConfig" but the name of
+# this variable has always been PKG_CONFIG_FOUND so this isn't automatically
+# handled by FPHSA.
+set(PKG_CONFIG_FOUND "${PKGCONFIG_FOUND}")
+
+# Unsets the given variables
+macro(_pkgconfig_unset var)
+  set(${var} "" CACHE INTERNAL "")
+endmacro()
+
+macro(_pkgconfig_set var value)
+  set(${var} ${value} CACHE INTERNAL "")
+endmacro()
+
+# Invokes pkgconfig, cleans up the result and sets variables
+macro(_pkgconfig_invoke _pkglist _prefix _varname _regexp)
+  set(_pkgconfig_invoke_result)
+
+  execute_process(
+    COMMAND ${PKG_CONFIG_EXECUTABLE} ${ARGN} ${_pkglist}
+    OUTPUT_VARIABLE _pkgconfig_invoke_result
+    RESULT_VARIABLE _pkgconfig_failed
+    OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+  if (_pkgconfig_failed)
+    set(_pkgconfig_${_varname} "")
+    _pkgconfig_unset(${_prefix}_${_varname})
+  else()
+    string(REGEX REPLACE "[\r\n]"                  " " _pkgconfig_invoke_result "${_pkgconfig_invoke_result}")
+
+    if (NOT ${_regexp} STREQUAL "")
+      string(REGEX REPLACE "${_regexp}" " " _pkgconfig_invoke_result "${_pkgconfig_invoke_result}")
+    endif()
+
+    separate_arguments(_pkgconfig_invoke_result)
+
+    #message(STATUS "  ${_varname} ... ${_pkgconfig_invoke_result}")
+    set(_pkgconfig_${_varname} ${_pkgconfig_invoke_result})
+    _pkgconfig_set(${_prefix}_${_varname} "${_pkgconfig_invoke_result}")
+  endif()
+endmacro()
+
+#[========================================[.rst:
+.. command:: pkg_get_variable
+
+  Retrieves the value of a variable from a package::
+
+    pkg_get_variable(<RESULT> <MODULE> <VARIABLE>)
+
+  For example:
+
+  .. code-block:: cmake
+
+    pkg_get_variable(GI_GIRDIR gobject-introspection-1.0 girdir)
+#]========================================]
+function (pkg_get_variable result pkg variable)
+  _pkgconfig_invoke("${pkg}" "prefix" "result" "" "--variable=${variable}")
+  set("${result}"
+    "${prefix_result}"
+    PARENT_SCOPE)
+endfunction ()
+
+# Invokes pkgconfig two times; once without '--static' and once with
+# '--static'
+macro(_pkgconfig_invoke_dyn _pkglist _prefix _varname cleanup_regexp)
+  _pkgconfig_invoke("${_pkglist}" ${_prefix}        ${_varname} "${cleanup_regexp}" ${ARGN})
+  _pkgconfig_invoke("${_pkglist}" ${_prefix} STATIC_${_varname} "${cleanup_regexp}" --static  ${ARGN})
+endmacro()
+
+# Splits given arguments into options and a package list
+macro(_pkgconfig_parse_options _result _is_req _is_silent _no_cmake_path _no_cmake_environment_path _imp_target)
+  set(${_is_req} 0)
+  set(${_is_silent} 0)
+  set(${_no_cmake_path} 0)
+  set(${_no_cmake_environment_path} 0)
+  set(${_imp_target} 0)
+  if(DEFINED PKG_CONFIG_USE_CMAKE_PREFIX_PATH)
+    if(NOT PKG_CONFIG_USE_CMAKE_PREFIX_PATH)
+      set(${_no_cmake_path} 1)
+      set(${_no_cmake_environment_path} 1)
+    endif()
+  elseif(CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 3.1)
+    set(${_no_cmake_path} 1)
+    set(${_no_cmake_environment_path} 1)
+  endif()
+
+  foreach(_pkg ${ARGN})
+    if (_pkg STREQUAL "REQUIRED")
+      set(${_is_req} 1)
+    endif ()
+    if (_pkg STREQUAL "QUIET")
+      set(${_is_silent} 1)
+    endif ()
+    if (_pkg STREQUAL "NO_CMAKE_PATH")
+      set(${_no_cmake_path} 1)
+    endif()
+    if (_pkg STREQUAL "NO_CMAKE_ENVIRONMENT_PATH")
+      set(${_no_cmake_environment_path} 1)
+    endif()
+    if (_pkg STREQUAL "IMPORTED_TARGET")
+      set(${_imp_target} 1)
+    endif()
+  endforeach()
+
+  set(${_result} ${ARGN})
+  list(REMOVE_ITEM ${_result} "REQUIRED")
+  list(REMOVE_ITEM ${_result} "QUIET")
+  list(REMOVE_ITEM ${_result} "NO_CMAKE_PATH")
+  list(REMOVE_ITEM ${_result} "NO_CMAKE_ENVIRONMENT_PATH")
+  list(REMOVE_ITEM ${_result} "IMPORTED_TARGET")
+endmacro()
+
+# Add the content of a variable or an environment variable to a list of
+# paths
+# Usage:
+#  - _pkgconfig_add_extra_path(_extra_paths VAR)
+#  - _pkgconfig_add_extra_path(_extra_paths ENV VAR)
+function(_pkgconfig_add_extra_path _extra_paths_var _var)
+  set(_is_env 0)
+  if(ARGC GREATER 2 AND _var STREQUAL "ENV")
+    set(_var ${ARGV2})
+    set(_is_env 1)
+  endif()
+  if(NOT _is_env)
+    if(NOT "${${_var}}" STREQUAL "")
+      list(APPEND ${_extra_paths_var} ${${_var}})
+    endif()
+  else()
+    if(NOT "$ENV{${_var}}" STREQUAL "")
+      file(TO_CMAKE_PATH "$ENV{${_var}}" _path)
+      list(APPEND ${_extra_paths_var} ${_path})
+      unset(_path)
+    endif()
+  endif()
+  set(${_extra_paths_var} ${${_extra_paths_var}} PARENT_SCOPE)
+endfunction()
+
+# scan the LDFLAGS returned by pkg-config for library directories and
+# libraries, figure out the absolute paths of that libraries in the
+# given directories, and create an imported target from them
+function(_pkg_create_imp_target _prefix _no_cmake_path _no_cmake_environment_path)
+  unset(_libs)
+  unset(_find_opts)
+
+  # set the options that are used as long as the .pc file does not provide a library
+  # path to look into
+  if(_no_cmake_path)
+    set(_find_opts "NO_CMAKE_PATH")
+  endif()
+  if(_no_cmake_environment_path)
+    set(_find_opts "${_find_opts} NO_CMAKE_ENVIRONMENT_PATH")
+  endif()
+
+  foreach (flag IN LISTS ${_prefix}_LDFLAGS)
+    if (flag MATCHES "^-L(.*)")
+      # only look into the given paths from now on
+      set(_find_opts "HINTS ${${CMAKE_MATCH_1}} NO_DEFAULT_PATH")
+      continue()
+    endif()
+    if (flag MATCHES "^-l(.*)")
+      set(_pkg_search "${CMAKE_MATCH_1}")
+    else()
+      continue()
+    endif()
+
+    find_library(pkgcfg_lib_${_prefix}_${_pkg_search}
+                 NAMES ${_pkg_search}
+                 ${_find_opts})
+    list(APPEND _libs "${pkgcfg_lib_${_prefix}_${_pkg_search}}")
+  endforeach()
+
+  # only create the target if it is linkable, i.e. no executables
+  if (NOT TARGET PkgConfig::${_prefix}
+      AND ( ${_prefix}_INCLUDE_DIRS OR _libs OR ${_prefix}_CFLAGS_OTHER ))
+    add_library(PkgConfig::${_prefix} INTERFACE IMPORTED)
+
+    unset(_props)
+    if(${_prefix}_INCLUDE_DIRS)
+      set_property(TARGET PkgConfig::${_prefix} PROPERTY
+                   INTERFACE_INCLUDE_DIRECTORIES "${${_prefix}_INCLUDE_DIRS}")
+    endif()
+    if(_libs)
+      set_property(TARGET PkgConfig::${_prefix} PROPERTY
+                   INTERFACE_LINK_LIBRARIES "${_libs}")
+    endif()
+    if(${_prefix}_CFLAGS_OTHER)
+      set_property(TARGET PkgConfig::${_prefix} PROPERTY
+                   INTERFACE_COMPILE_OPTIONS "${${_prefix}_CFLAGS_OTHER}")
+    endif()
+  endif()
+endfunction()
+
+###
+macro(_pkg_check_modules_internal _is_required _is_silent _no_cmake_path _no_cmake_environment_path _imp_target _prefix)
+  _pkgconfig_unset(${_prefix}_FOUND)
+  _pkgconfig_unset(${_prefix}_VERSION)
+  _pkgconfig_unset(${_prefix}_PREFIX)
+  _pkgconfig_unset(${_prefix}_INCLUDEDIR)
+  _pkgconfig_unset(${_prefix}_LIBDIR)
+  _pkgconfig_unset(${_prefix}_LIBS)
+  _pkgconfig_unset(${_prefix}_LIBS_L)
+  _pkgconfig_unset(${_prefix}_LIBS_PATHS)
+  _pkgconfig_unset(${_prefix}_LIBS_OTHER)
+  _pkgconfig_unset(${_prefix}_CFLAGS)
+  _pkgconfig_unset(${_prefix}_CFLAGS_I)
+  _pkgconfig_unset(${_prefix}_CFLAGS_OTHER)
+  _pkgconfig_unset(${_prefix}_STATIC_LIBDIR)
+  _pkgconfig_unset(${_prefix}_STATIC_LIBS)
+  _pkgconfig_unset(${_prefix}_STATIC_LIBS_L)
+  _pkgconfig_unset(${_prefix}_STATIC_LIBS_PATHS)
+  _pkgconfig_unset(${_prefix}_STATIC_LIBS_OTHER)
+  _pkgconfig_unset(${_prefix}_STATIC_CFLAGS)
+  _pkgconfig_unset(${_prefix}_STATIC_CFLAGS_I)
+  _pkgconfig_unset(${_prefix}_STATIC_CFLAGS_OTHER)
+
+  # create a better addressable variable of the modules and calculate its size
+  set(_pkg_check_modules_list ${ARGN})
+  list(LENGTH _pkg_check_modules_list _pkg_check_modules_cnt)
+
+  if(PKG_CONFIG_EXECUTABLE)
+    # give out status message telling checked module
+    if (NOT ${_is_silent})
+      if (_pkg_check_modules_cnt EQUAL 1)
+        message(STATUS "Checking for module '${_pkg_check_modules_list}'")
+      else()
+        message(STATUS "Checking for modules '${_pkg_check_modules_list}'")
+      endif()
+    endif()
+
+    set(_pkg_check_modules_packages)
+    set(_pkg_check_modules_failed)
+
+    set(_extra_paths)
+
+    if(NOT _no_cmake_path)
+      _pkgconfig_add_extra_path(_extra_paths CMAKE_PREFIX_PATH)
+      _pkgconfig_add_extra_path(_extra_paths CMAKE_FRAMEWORK_PATH)
+      _pkgconfig_add_extra_path(_extra_paths CMAKE_APPBUNDLE_PATH)
+    endif()
+
+    if(NOT _no_cmake_environment_path)
+      _pkgconfig_add_extra_path(_extra_paths ENV CMAKE_PREFIX_PATH)
+      _pkgconfig_add_extra_path(_extra_paths ENV CMAKE_FRAMEWORK_PATH)
+      _pkgconfig_add_extra_path(_extra_paths ENV CMAKE_APPBUNDLE_PATH)
+    endif()
+
+    if(NOT "${_extra_paths}" STREQUAL "")
+      # Save the PKG_CONFIG_PATH environment variable, and add paths
+      # from the CMAKE_PREFIX_PATH variables
+      set(_pkgconfig_path_old "$ENV{PKG_CONFIG_PATH}")
+      set(_pkgconfig_path "${_pkgconfig_path_old}")
+      if(NOT "${_pkgconfig_path}" STREQUAL "")
+        file(TO_CMAKE_PATH "${_pkgconfig_path}" _pkgconfig_path)
+      endif()
+
+      # Create a list of the possible pkgconfig subfolder (depending on
+      # the system
+      set(_lib_dirs)
+      if(NOT DEFINED CMAKE_SYSTEM_NAME
+          OR (CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$"
+              AND NOT CMAKE_CROSSCOMPILING))
+        if(EXISTS "/etc/debian_version") # is this a debian system ?
+          if(CMAKE_LIBRARY_ARCHITECTURE)
+            list(APPEND _lib_dirs "lib/${CMAKE_LIBRARY_ARCHITECTURE}/pkgconfig")
+          endif()
+        else()
+          # not debian, chech the FIND_LIBRARY_USE_LIB64_PATHS property
+          get_property(uselib64 GLOBAL PROPERTY FIND_LIBRARY_USE_LIB64_PATHS)
+          if(uselib64)
+            list(APPEND _lib_dirs "lib64/pkgconfig")
+          endif()
+        endif()
+      endif()
+      list(APPEND _lib_dirs "lib/pkgconfig")
+      list(APPEND _lib_dirs "share/pkgconfig")
+
+      # Check if directories exist and eventually append them to the
+      # pkgconfig path list
+      foreach(_prefix_dir ${_extra_paths})
+        foreach(_lib_dir ${_lib_dirs})
+          if(EXISTS "${_prefix_dir}/${_lib_dir}")
+            list(APPEND _pkgconfig_path "${_prefix_dir}/${_lib_dir}")
+            list(REMOVE_DUPLICATES _pkgconfig_path)
+          endif()
+        endforeach()
+      endforeach()
+
+      # Prepare and set the environment variable
+      if(NOT "${_pkgconfig_path}" STREQUAL "")
+        # remove empty values from the list
+        list(REMOVE_ITEM _pkgconfig_path "")
+        file(TO_NATIVE_PATH "${_pkgconfig_path}" _pkgconfig_path)
+        if(UNIX)
+          string(REPLACE ";" ":" _pkgconfig_path "${_pkgconfig_path}")
+          string(REPLACE "\\ " " " _pkgconfig_path "${_pkgconfig_path}")
+        endif()
+        set(ENV{PKG_CONFIG_PATH} "${_pkgconfig_path}")
+      endif()
+
+      # Unset variables
+      unset(_lib_dirs)
+      unset(_pkgconfig_path)
+    endif()
+
+    # iterate through module list and check whether they exist and match the required version
+    foreach (_pkg_check_modules_pkg ${_pkg_check_modules_list})
+      set(_pkg_check_modules_exist_query)
+
+      # check whether version is given
+      if (_pkg_check_modules_pkg MATCHES "(.*[^><])(>=|=|<=)(.*)")
+        set(_pkg_check_modules_pkg_name "${CMAKE_MATCH_1}")
+        set(_pkg_check_modules_pkg_op "${CMAKE_MATCH_2}")
+        set(_pkg_check_modules_pkg_ver "${CMAKE_MATCH_3}")
+      else()
+        set(_pkg_check_modules_pkg_name "${_pkg_check_modules_pkg}")
+        set(_pkg_check_modules_pkg_op)
+        set(_pkg_check_modules_pkg_ver)
+      endif()
+
+      # handle the operands
+      if (_pkg_check_modules_pkg_op STREQUAL ">=")
+        list(APPEND _pkg_check_modules_exist_query --atleast-version)
+      endif()
+
+      if (_pkg_check_modules_pkg_op STREQUAL "=")
+        list(APPEND _pkg_check_modules_exist_query --exact-version)
+      endif()
+
+      if (_pkg_check_modules_pkg_op STREQUAL "<=")
+        list(APPEND _pkg_check_modules_exist_query --max-version)
+      endif()
+
+      # create the final query which is of the format:
+      # * --atleast-version <version> <pkg-name>
+      # * --exact-version <version> <pkg-name>
+      # * --max-version <version> <pkg-name>
+      # * --exists <pkg-name>
+      if (_pkg_check_modules_pkg_op)
+        list(APPEND _pkg_check_modules_exist_query "${_pkg_check_modules_pkg_ver}")
+      else()
+        list(APPEND _pkg_check_modules_exist_query --exists --print-errors --short-errors)
+      endif()
+
+      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_VERSION)
+      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_PREFIX)
+      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_INCLUDEDIR)
+      _pkgconfig_unset(${_prefix}_${_pkg_check_modules_pkg_name}_LIBDIR)
+
+      list(APPEND _pkg_check_modules_exist_query "${_pkg_check_modules_pkg_name}")
+      list(APPEND _pkg_check_modules_packages    "${_pkg_check_modules_pkg_name}")
+
+      # execute the query
+      execute_process(
+        COMMAND ${PKG_CONFIG_EXECUTABLE} ${_pkg_check_modules_exist_query}
+        RESULT_VARIABLE _pkgconfig_retval
+        ERROR_VARIABLE _pkgconfig_error
+        ERROR_STRIP_TRAILING_WHITESPACE)
+
+      # evaluate result and tell failures
+      if (_pkgconfig_retval)
+        if(NOT ${_is_silent})
+          message(STATUS "  ${_pkgconfig_error}")
+        endif()
+
+        set(_pkg_check_modules_failed 1)
+      endif()
+    endforeach()
+
+    if(_pkg_check_modules_failed)
+      # fail when requested
+      if (${_is_required})
+        message(FATAL_ERROR "A required package was not found")
+      endif ()
+    else()
+      # when we are here, we checked whether requested modules
+      # exist. Now, go through them and set variables
+
+      _pkgconfig_set(${_prefix}_FOUND 1)
+      list(LENGTH _pkg_check_modules_packages pkg_count)
+
+      # iterate through all modules again and set individual variables
+      foreach (_pkg_check_modules_pkg ${_pkg_check_modules_packages})
+        # handle case when there is only one package required
+        if (pkg_count EQUAL 1)
+          set(_pkg_check_prefix "${_prefix}")
+        else()
+          set(_pkg_check_prefix "${_prefix}_${_pkg_check_modules_pkg}")
+        endif()
+
+        _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" VERSION    ""   --modversion )
+        pkg_get_variable("${_pkg_check_prefix}_PREFIX" ${_pkg_check_modules_pkg} "prefix")
+        pkg_get_variable("${_pkg_check_prefix}_INCLUDEDIR" ${_pkg_check_modules_pkg} "includedir")
+        pkg_get_variable("${_pkg_check_prefix}_LIBDIR" ${_pkg_check_modules_pkg} "libdir")
+        foreach (variable IN ITEMS PREFIX INCLUDEDIR LIBDIR)
+          _pkgconfig_set("${_pkg_check_prefix}_${variable}" "${${_pkg_check_prefix}_${variable}}")
+        endforeach ()
+
+        if (NOT ${_is_silent})
+          message(STATUS "  Found ${_pkg_check_modules_pkg}, version ${_pkgconfig_VERSION}")
+        endif ()
+      endforeach()
+
+      # set variables which are combined for multiple modules
+      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LIBRARIES           "(^| )-l" --libs-only-l )
+      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LIBRARY_DIRS        "(^| )-L" --libs-only-L )
+      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LDFLAGS             ""        --libs )
+      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" LDFLAGS_OTHER       ""        --libs-only-other )
+
+      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" INCLUDE_DIRS        "(^| )-I" --cflags-only-I )
+      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" CFLAGS              ""        --cflags )
+      _pkgconfig_invoke_dyn("${_pkg_check_modules_packages}" "${_prefix}" CFLAGS_OTHER        ""        --cflags-only-other )
+
+      if (_imp_target)
+        _pkg_create_imp_target("${_prefix}" _no_cmake_path _no_cmake_environment_path)
+      endif()
+    endif()
+
+    if(NOT "${_extra_paths}" STREQUAL "")
+      # Restore the environment variable
+      set(ENV{PKG_CONFIG_PATH} "${_pkgconfig_path_old}")
+    endif()
+
+    unset(_extra_paths)
+    unset(_pkgconfig_path_old)
+  else()
+    if (${_is_required})
+      message(SEND_ERROR "pkg-config tool not found")
+    endif ()
+  endif()
+endmacro()
+
+###
+### User visible macros start here
+###
+
+#[========================================[.rst:
+.. command:: pkg_check_modules
+
+ Checks for all the given modules. ::
+
+    pkg_check_modules(<PREFIX> [REQUIRED] [QUIET]
+                      [NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
+                      [IMPORTED_TARGET]
+                      <MODULE> [<MODULE>]*)
+
+
+ When the ``REQUIRED`` argument was set, macros will fail with an error
+ when module(s) could not be found.
+
+ When the ``QUIET`` argument is set, no status messages will be printed.
+
+ By default, if :variable:`CMAKE_MINIMUM_REQUIRED_VERSION` is 3.1 or
+ later, or if :variable:`PKG_CONFIG_USE_CMAKE_PREFIX_PATH` is set, the
+ :variable:`CMAKE_PREFIX_PATH`, :variable:`CMAKE_FRAMEWORK_PATH`, and
+ :variable:`CMAKE_APPBUNDLE_PATH` cache and environment variables will
+ be added to ``pkg-config`` search path.
+ The ``NO_CMAKE_PATH`` and ``NO_CMAKE_ENVIRONMENT_PATH`` arguments
+ disable this behavior for the cache variables and the environment
+ variables, respectively.
+ The ``IMPORTED_TARGET`` argument will create an imported target named
+ PkgConfig::<PREFIX>> that can be passed directly as an argument to
+ :command:`target_link_libraries`.
+
+ It sets the following variables: ::
+
+    PKG_CONFIG_FOUND          ... if pkg-config executable was found
+    PKG_CONFIG_EXECUTABLE     ... pathname of the pkg-config program
+    PKG_CONFIG_VERSION_STRING ... the version of the pkg-config program found
+                                  (since CMake 2.8.8)
+
+ For the following variables two sets of values exist; first one is the
+ common one and has the given PREFIX.  The second set contains flags
+ which are given out when ``pkg-config`` was called with the ``--static``
+ option. ::
+
+    <XPREFIX>_FOUND          ... set to 1 if module(s) exist
+    <XPREFIX>_LIBRARIES      ... only the libraries (w/o the '-l')
+    <XPREFIX>_LIBRARY_DIRS   ... the paths of the libraries (w/o the '-L')
+    <XPREFIX>_LDFLAGS        ... all required linker flags
+    <XPREFIX>_LDFLAGS_OTHER  ... all other linker flags
+    <XPREFIX>_INCLUDE_DIRS   ... the '-I' preprocessor flags (w/o the '-I')
+    <XPREFIX>_CFLAGS         ... all required cflags
+    <XPREFIX>_CFLAGS_OTHER   ... the other compiler flags
+
+ ::
+
+    <XPREFIX> = <PREFIX>        for common case
+    <XPREFIX> = <PREFIX>_STATIC for static linking
+
+ There are some special variables whose prefix depends on the count of
+ given modules.  When there is only one module, <PREFIX> stays
+ unchanged.  When there are multiple modules, the prefix will be
+ changed to <PREFIX>_<MODNAME>: ::
+
+    <XPREFIX>_VERSION    ... version of the module
+    <XPREFIX>_PREFIX     ... prefix-directory of the module
+    <XPREFIX>_INCLUDEDIR ... include-dir of the module
+    <XPREFIX>_LIBDIR     ... lib-dir of the module
+
+ ::
+
+    <XPREFIX> = <PREFIX>  when |MODULES| == 1, else
+    <XPREFIX> = <PREFIX>_<MODNAME>
+
+ A <MODULE> parameter can have the following formats: ::
+
+    {MODNAME}            ... matches any version
+    {MODNAME}>={VERSION} ... at least version <VERSION> is required
+    {MODNAME}={VERSION}  ... exactly version <VERSION> is required
+    {MODNAME}<={VERSION} ... modules must not be newer than <VERSION>
+
+ Examples
+
+ .. code-block:: cmake
+
+    pkg_check_modules (GLIB2   glib-2.0)
+
+ .. code-block:: cmake
+
+    pkg_check_modules (GLIB2   glib-2.0>=2.10)
+
+ Requires at least version 2.10 of glib2 and defines e.g.
+ ``GLIB2_VERSION=2.10.3``
+
+ .. code-block:: cmake
+
+    pkg_check_modules (FOO     glib-2.0>=2.10 gtk+-2.0)
+
+ Requires both glib2 and gtk2, and defines e.g.
+ ``FOO_glib-2.0_VERSION=2.10.3`` and ``FOO_gtk+-2.0_VERSION=2.8.20``
+
+ .. code-block:: cmake
+
+    pkg_check_modules (XRENDER REQUIRED xrender)
+
+ Defines for example::
+
+   XRENDER_LIBRARIES=Xrender;X11``
+   XRENDER_STATIC_LIBRARIES=Xrender;X11;pthread;Xau;Xdmcp
+#]========================================]
+macro(pkg_check_modules _prefix _module0)
+  # check cached value
+  if (NOT DEFINED __pkg_config_checked_${_prefix} OR __pkg_config_checked_${_prefix} LESS ${PKG_CONFIG_VERSION} OR NOT ${_prefix}_FOUND)
+    _pkgconfig_parse_options   (_pkg_modules _pkg_is_required _pkg_is_silent _no_cmake_path _no_cmake_environment_path _imp_target "${_module0}" ${ARGN})
+    _pkg_check_modules_internal("${_pkg_is_required}" "${_pkg_is_silent}" ${_no_cmake_path} ${_no_cmake_environment_path} ${_imp_target} "${_prefix}" ${_pkg_modules})
+
+    _pkgconfig_set(__pkg_config_checked_${_prefix} ${PKG_CONFIG_VERSION})
+  endif()
+endmacro()
+
+
+#[========================================[.rst:
+.. command:: pkg_search_module
+
+ Same as :command:`pkg_check_modules`, but instead it checks for given
+ modules and uses the first working one. ::
+
+    pkg_search_module(<PREFIX> [REQUIRED] [QUIET]
+                      [NO_CMAKE_PATH] [NO_CMAKE_ENVIRONMENT_PATH]
+                      [IMPORTED_TARGET]
+                      <MODULE> [<MODULE>]*)
+
+ Examples
+
+ .. code-block:: cmake
+
+    pkg_search_module (BAR     libxml-2.0 libxml2 libxml>=2)
+#]========================================]
+macro(pkg_search_module _prefix _module0)
+  # check cached value
+  if (NOT DEFINED __pkg_config_checked_${_prefix} OR __pkg_config_checked_${_prefix} LESS ${PKG_CONFIG_VERSION} OR NOT ${_prefix}_FOUND)
+    set(_pkg_modules_found 0)
+    _pkgconfig_parse_options(_pkg_modules_alt _pkg_is_required _pkg_is_silent _no_cmake_path _no_cmake_environment_path _imp_target "${_module0}" ${ARGN})
+
+    if (NOT ${_pkg_is_silent})
+      message(STATUS "Checking for one of the modules '${_pkg_modules_alt}'")
+    endif ()
+
+    # iterate through all modules and stop at the first working one.
+    foreach(_pkg_alt ${_pkg_modules_alt})
+      if(NOT _pkg_modules_found)
+        _pkg_check_modules_internal(0 1 ${_no_cmake_path} ${_no_cmake_environment_path} ${_imp_target} "${_prefix}" "${_pkg_alt}")
+      endif()
+
+      if (${_prefix}_FOUND)
+        set(_pkg_modules_found 1)
+      endif()
+    endforeach()
+
+    if (NOT ${_prefix}_FOUND)
+      if(${_pkg_is_required})
+        message(SEND_ERROR "None of the required '${_pkg_modules_alt}' found")
+      endif()
+    endif()
+
+    _pkgconfig_set(__pkg_config_checked_${_prefix} ${PKG_CONFIG_VERSION})
+  endif()
+endmacro()
+
+
+#[========================================[.rst:
+.. variable:: PKG_CONFIG_EXECUTABLE
+
+ Path to the pkg-config executable.
+
+
+.. variable:: PKG_CONFIG_USE_CMAKE_PREFIX_PATH
+
+ Whether :command:`pkg_check_modules` and :command:`pkg_search_module`
+ should add the paths in :variable:`CMAKE_PREFIX_PATH`,
+ :variable:`CMAKE_FRAMEWORK_PATH`, and :variable:`CMAKE_APPBUNDLE_PATH`
+ cache and environment variables to ``pkg-config`` search path.
+
+ If this variable is not set, this behavior is enabled by default if
+ :variable:`CMAKE_MINIMUM_REQUIRED_VERSION` is 3.1 or later, disabled
+ otherwise.
+#]========================================]
+
+
+### Local Variables:
+### mode: cmake
+### End:
diff --git a/share/cmake-3.6/Modules/FindPostgreSQL.cmake b/share/cmake-3.6/Modules/FindPostgreSQL.cmake
new file mode 100644
index 0000000..d05d3da
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindPostgreSQL.cmake
@@ -0,0 +1,192 @@
+#.rst:
+# FindPostgreSQL
+# --------------
+#
+# Find the PostgreSQL installation.
+#
+# This module defines
+#
+# ::
+#
+#   PostgreSQL_LIBRARIES - the PostgreSQL libraries needed for linking
+#   PostgreSQL_INCLUDE_DIRS - the directories of the PostgreSQL headers
+#   PostgreSQL_LIBRARY_DIRS  - the link directories for PostgreSQL libraries
+#   PostgreSQL_VERSION_STRING - the version of PostgreSQL found (since CMake 2.8.8)
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# ----------------------------------------------------------------------------
+# History:
+# This module is derived from the module originally found in the VTK source tree.
+#
+# ----------------------------------------------------------------------------
+# Note:
+# PostgreSQL_ADDITIONAL_VERSIONS is a variable that can be used to set the
+# version mumber of the implementation of PostgreSQL.
+# In Windows the default installation of PostgreSQL uses that as part of the path.
+# E.g C:\Program Files\PostgreSQL\8.4.
+# Currently, the following version numbers are known to this module:
+# "9.4" "9.3" "9.2" "9.1" "9.0" "8.4" "8.3" "8.2" "8.1" "8.0"
+#
+# To use this variable just do something like this:
+# set(PostgreSQL_ADDITIONAL_VERSIONS "9.2" "8.4.4")
+# before calling find_package(PostgreSQL) in your CMakeLists.txt file.
+# This will mean that the versions you set here will be found first in the order
+# specified before the default ones are searched.
+#
+# ----------------------------------------------------------------------------
+# You may need to manually set:
+#  PostgreSQL_INCLUDE_DIR  - the path to where the PostgreSQL include files are.
+#  PostgreSQL_LIBRARY_DIR  - The path to where the PostgreSQL library files are.
+# If FindPostgreSQL.cmake cannot find the include files or the library files.
+#
+# ----------------------------------------------------------------------------
+# The following variables are set if PostgreSQL is found:
+#  PostgreSQL_FOUND         - Set to true when PostgreSQL is found.
+#  PostgreSQL_INCLUDE_DIRS  - Include directories for PostgreSQL
+#  PostgreSQL_LIBRARY_DIRS  - Link directories for PostgreSQL libraries
+#  PostgreSQL_LIBRARIES     - The PostgreSQL libraries.
+#
+# ----------------------------------------------------------------------------
+# If you have installed PostgreSQL in a non-standard location.
+# (Please note that in the following comments, it is assumed that <Your Path>
+# points to the root directory of the include directory of PostgreSQL.)
+# Then you have three options.
+# 1) After CMake runs, set PostgreSQL_INCLUDE_DIR to <Your Path>/include and
+#    PostgreSQL_LIBRARY_DIR to wherever the library pq (or libpq in windows) is
+# 2) Use CMAKE_INCLUDE_PATH to set a path to <Your Path>/PostgreSQL<-version>. This will allow find_path()
+#    to locate PostgreSQL_INCLUDE_DIR by utilizing the PATH_SUFFIXES option. e.g. In your CMakeLists.txt file
+#    set(CMAKE_INCLUDE_PATH ${CMAKE_INCLUDE_PATH} "<Your Path>/include")
+# 3) Set an environment variable called ${PostgreSQL_ROOT} that points to the root of where you have
+#    installed PostgreSQL, e.g. <Your Path>.
+#
+# ----------------------------------------------------------------------------
+
+set(PostgreSQL_INCLUDE_PATH_DESCRIPTION "top-level directory containing the PostgreSQL include directories. E.g /usr/local/include/PostgreSQL/8.4 or C:/Program Files/PostgreSQL/8.4/include")
+set(PostgreSQL_INCLUDE_DIR_MESSAGE "Set the PostgreSQL_INCLUDE_DIR cmake cache entry to the ${PostgreSQL_INCLUDE_PATH_DESCRIPTION}")
+set(PostgreSQL_LIBRARY_PATH_DESCRIPTION "top-level directory containing the PostgreSQL libraries.")
+set(PostgreSQL_LIBRARY_DIR_MESSAGE "Set the PostgreSQL_LIBRARY_DIR cmake cache entry to the ${PostgreSQL_LIBRARY_PATH_DESCRIPTION}")
+set(PostgreSQL_ROOT_DIR_MESSAGE "Set the PostgreSQL_ROOT system variable to where PostgreSQL is found on the machine E.g C:/Program Files/PostgreSQL/8.4")
+
+
+set(PostgreSQL_KNOWN_VERSIONS ${PostgreSQL_ADDITIONAL_VERSIONS}
+    "9.5" "9.4" "9.3" "9.2" "9.1" "9.0" "8.4" "8.3" "8.2" "8.1" "8.0")
+
+# Define additional search paths for root directories.
+set( PostgreSQL_ROOT_DIRECTORIES
+   ENV PostgreSQL_ROOT
+   ${PostgreSQL_ROOT}
+)
+foreach(suffix ${PostgreSQL_KNOWN_VERSIONS})
+  if(WIN32)
+    list(APPEND PostgreSQL_LIBRARY_ADDITIONAL_SEARCH_SUFFIXES
+        "PostgreSQL/${suffix}/lib")
+    list(APPEND PostgreSQL_INCLUDE_ADDITIONAL_SEARCH_SUFFIXES
+        "PostgreSQL/${suffix}/include")
+    list(APPEND PostgreSQL_TYPE_ADDITIONAL_SEARCH_SUFFIXES
+        "PostgreSQL/${suffix}/include/server")
+  endif()
+  if(UNIX)
+    list(APPEND PostgreSQL_TYPE_ADDITIONAL_SEARCH_SUFFIXES
+        "postgresql/${suffix}/server")
+  endif()
+endforeach()
+
+#
+# Look for an installation.
+#
+find_path(PostgreSQL_INCLUDE_DIR
+  NAMES libpq-fe.h
+  PATHS
+   # Look in other places.
+   ${PostgreSQL_ROOT_DIRECTORIES}
+  PATH_SUFFIXES
+    pgsql
+    postgresql
+    include
+    ${PostgreSQL_INCLUDE_ADDITIONAL_SEARCH_SUFFIXES}
+  # Help the user find it if we cannot.
+  DOC "The ${PostgreSQL_INCLUDE_DIR_MESSAGE}"
+)
+
+find_path(PostgreSQL_TYPE_INCLUDE_DIR
+  NAMES catalog/pg_type.h
+  PATHS
+   # Look in other places.
+   ${PostgreSQL_ROOT_DIRECTORIES}
+  PATH_SUFFIXES
+    postgresql
+    pgsql/server
+    postgresql/server
+    include/server
+    ${PostgreSQL_TYPE_ADDITIONAL_SEARCH_SUFFIXES}
+  # Help the user find it if we cannot.
+  DOC "The ${PostgreSQL_INCLUDE_DIR_MESSAGE}"
+)
+
+# The PostgreSQL library.
+set (PostgreSQL_LIBRARY_TO_FIND pq)
+# Setting some more prefixes for the library
+set (PostgreSQL_LIB_PREFIX "")
+if ( WIN32 )
+  set (PostgreSQL_LIB_PREFIX ${PostgreSQL_LIB_PREFIX} "lib")
+  set (PostgreSQL_LIBRARY_TO_FIND ${PostgreSQL_LIB_PREFIX}${PostgreSQL_LIBRARY_TO_FIND})
+endif()
+
+find_library(PostgreSQL_LIBRARY
+ NAMES ${PostgreSQL_LIBRARY_TO_FIND}
+ PATHS
+   ${PostgreSQL_ROOT_DIRECTORIES}
+ PATH_SUFFIXES
+   lib
+   ${PostgreSQL_LIBRARY_ADDITIONAL_SEARCH_SUFFIXES}
+ # Help the user find it if we cannot.
+ DOC "The ${PostgreSQL_LIBRARY_DIR_MESSAGE}"
+)
+get_filename_component(PostgreSQL_LIBRARY_DIR ${PostgreSQL_LIBRARY} PATH)
+
+if (PostgreSQL_INCLUDE_DIR)
+  # Some platforms include multiple pg_config.hs for multi-lib configurations
+  # This is a temporary workaround.  A better solution would be to compile
+  # a dummy c file and extract the value of the symbol.
+  file(GLOB _PG_CONFIG_HEADERS "${PostgreSQL_INCLUDE_DIR}/pg_config*.h")
+  foreach(_PG_CONFIG_HEADER ${_PG_CONFIG_HEADERS})
+    if(EXISTS "${_PG_CONFIG_HEADER}")
+      file(STRINGS "${_PG_CONFIG_HEADER}" pgsql_version_str
+           REGEX "^#define[\t ]+PG_VERSION[\t ]+\".*\"")
+      if(pgsql_version_str)
+        string(REGEX REPLACE "^#define[\t ]+PG_VERSION[\t ]+\"([^\"]*)\".*"
+               "\\1" PostgreSQL_VERSION_STRING "${pgsql_version_str}")
+        break()
+      endif()
+    endif()
+  endforeach()
+  unset(pgsql_version_str)
+endif()
+
+# Did we find anything?
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(PostgreSQL
+                                  REQUIRED_VARS PostgreSQL_LIBRARY PostgreSQL_INCLUDE_DIR PostgreSQL_TYPE_INCLUDE_DIR
+                                  VERSION_VAR PostgreSQL_VERSION_STRING)
+set(PostgreSQL_FOUND  ${POSTGRESQL_FOUND})
+
+# Now try to get the include and library path.
+if(PostgreSQL_FOUND)
+  set(PostgreSQL_INCLUDE_DIRS ${PostgreSQL_INCLUDE_DIR} ${PostgreSQL_TYPE_INCLUDE_DIR} )
+  set(PostgreSQL_LIBRARY_DIRS ${PostgreSQL_LIBRARY_DIR} )
+  set(PostgreSQL_LIBRARIES ${PostgreSQL_LIBRARY_TO_FIND})
+endif()
+
+mark_as_advanced(PostgreSQL_INCLUDE_DIR PostgreSQL_TYPE_INCLUDE_DIR PostgreSQL_LIBRARY )
diff --git a/share/cmake-3.2/Modules/FindProducer.cmake b/share/cmake-3.6/Modules/FindProducer.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindProducer.cmake
rename to share/cmake-3.6/Modules/FindProducer.cmake
diff --git a/share/cmake-3.6/Modules/FindProtobuf.cmake b/share/cmake-3.6/Modules/FindProtobuf.cmake
new file mode 100644
index 0000000..8042073
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindProtobuf.cmake
@@ -0,0 +1,415 @@
+#.rst:
+# FindProtobuf
+# ------------
+#
+# Locate and configure the Google Protocol Buffers library.
+#
+# The following variables can be set and are optional:
+#
+# ``Protobuf_SRC_ROOT_FOLDER``
+#   When compiling with MSVC, if this cache variable is set
+#   the protobuf-default VS project build locations
+#   (vsprojects/Debug and vsprojects/Release
+#   or vsprojects/x64/Debug and vsprojects/x64/Release)
+#   will be searched for libraries and binaries.
+# ``Protobuf_IMPORT_DIRS``
+#   List of additional directories to be searched for
+#   imported .proto files.
+# ``Protobuf_DEBUG``
+#   Show debug messages.
+#
+# Defines the following variables:
+#
+# ``Protobuf_FOUND``
+#   Found the Google Protocol Buffers library
+#   (libprotobuf & header files)
+# ``Protobuf_VERSION``
+#   Version of package found.
+# ``Protobuf_INCLUDE_DIRS``
+#   Include directories for Google Protocol Buffers
+# ``Protobuf_LIBRARIES``
+#   The protobuf libraries
+# ``Protobuf_PROTOC_LIBRARIES``
+#   The protoc libraries
+# ``Protobuf_LITE_LIBRARIES``
+#   The protobuf-lite libraries
+#
+# The following cache variables are also available to set or use:
+#
+# ``Protobuf_LIBRARY``
+#   The protobuf library
+# ``Protobuf_PROTOC_LIBRARY``
+#   The protoc library
+# ``Protobuf_INCLUDE_DIR``
+#   The include directory for protocol buffers
+# ``Protobuf_PROTOC_EXECUTABLE``
+#   The protoc compiler
+# ``Protobuf_LIBRARY_DEBUG``
+#   The protobuf library (debug)
+# ``Protobuf_PROTOC_LIBRARY_DEBUG``
+#   The protoc library (debug)
+# ``Protobuf_LITE_LIBRARY``
+#   The protobuf lite library
+# ``Protobuf_LITE_LIBRARY_DEBUG``
+#   The protobuf lite library (debug)
+#
+# Example:
+#
+# .. code-block:: cmake
+#
+#   find_package(Protobuf REQUIRED)
+#   include_directories(${Protobuf_INCLUDE_DIRS})
+#   include_directories(${CMAKE_CURRENT_BINARY_DIR})
+#   protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS foo.proto)
+#   protobuf_generate_python(PROTO_PY foo.proto)
+#   add_executable(bar bar.cc ${PROTO_SRCS} ${PROTO_HDRS})
+#   target_link_libraries(bar ${Protobuf_LIBRARIES})
+#
+# .. note::
+#   The ``protobuf_generate_cpp`` and ``protobuf_generate_python``
+#   functions and :command:`add_executable` or :command:`add_library`
+#   calls only work properly within the same directory.
+#
+# .. command:: protobuf_generate_cpp
+#
+#   Add custom commands to process ``.proto`` files to C++::
+#
+#     protobuf_generate_cpp (<SRCS> <HDRS> [<ARGN>...])
+#
+#   ``SRCS``
+#     Variable to define with autogenerated source files
+#   ``HDRS``
+#     Variable to define with autogenerated header files
+#   ``ARGN``
+#     ``.proto`` files
+#
+# .. command:: protobuf_generate_python
+#
+#   Add custom commands to process ``.proto`` files to Python::
+#
+#     protobuf_generate_python (<PY> [<ARGN>...])
+#
+#   ``PY``
+#     Variable to define with autogenerated Python files
+#   ``ARGN``
+#     ``.proto`` filess
+
+#=============================================================================
+# Copyright 2009 Kitware, Inc.
+# Copyright 2009-2011 Philip Lowman <philip@yhbt.com>
+# Copyright 2008 Esben Mose Hansen, Ange Optimization ApS
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(PROTOBUF_GENERATE_CPP SRCS HDRS)
+  if(NOT ARGN)
+    message(SEND_ERROR "Error: PROTOBUF_GENERATE_CPP() called without any proto files")
+    return()
+  endif()
+
+  if(PROTOBUF_GENERATE_CPP_APPEND_PATH)
+    # Create an include path for each file specified
+    foreach(FIL ${ARGN})
+      get_filename_component(ABS_FIL ${FIL} ABSOLUTE)
+      get_filename_component(ABS_PATH ${ABS_FIL} PATH)
+      list(FIND _protobuf_include_path ${ABS_PATH} _contains_already)
+      if(${_contains_already} EQUAL -1)
+          list(APPEND _protobuf_include_path -I ${ABS_PATH})
+      endif()
+    endforeach()
+  else()
+    set(_protobuf_include_path -I ${CMAKE_CURRENT_SOURCE_DIR})
+  endif()
+
+  if(DEFINED Protobuf_IMPORT_DIRS)
+    foreach(DIR ${Protobuf_IMPORT_DIRS})
+      get_filename_component(ABS_PATH ${DIR} ABSOLUTE)
+      list(FIND _protobuf_include_path ${ABS_PATH} _contains_already)
+      if(${_contains_already} EQUAL -1)
+          list(APPEND _protobuf_include_path -I ${ABS_PATH})
+      endif()
+    endforeach()
+  endif()
+
+  set(${SRCS})
+  set(${HDRS})
+  foreach(FIL ${ARGN})
+    get_filename_component(ABS_FIL ${FIL} ABSOLUTE)
+    get_filename_component(FIL_WE ${FIL} NAME_WE)
+
+    list(APPEND ${SRCS} "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.cc")
+    list(APPEND ${HDRS} "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.h")
+
+    add_custom_command(
+      OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.cc"
+             "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.h"
+      COMMAND  ${Protobuf_PROTOC_EXECUTABLE}
+      ARGS --cpp_out  ${CMAKE_CURRENT_BINARY_DIR} ${_protobuf_include_path} ${ABS_FIL}
+      DEPENDS ${ABS_FIL} ${Protobuf_PROTOC_EXECUTABLE}
+      COMMENT "Running C++ protocol buffer compiler on ${FIL}"
+      VERBATIM )
+  endforeach()
+
+  set_source_files_properties(${${SRCS}} ${${HDRS}} PROPERTIES GENERATED TRUE)
+  set(${SRCS} ${${SRCS}} PARENT_SCOPE)
+  set(${HDRS} ${${HDRS}} PARENT_SCOPE)
+endfunction()
+
+function(PROTOBUF_GENERATE_PYTHON SRCS)
+  if(NOT ARGN)
+    message(SEND_ERROR "Error: PROTOBUF_GENERATE_PYTHON() called without any proto files")
+    return()
+  endif()
+
+  if(PROTOBUF_GENERATE_CPP_APPEND_PATH)
+    # Create an include path for each file specified
+    foreach(FIL ${ARGN})
+      get_filename_component(ABS_FIL ${FIL} ABSOLUTE)
+      get_filename_component(ABS_PATH ${ABS_FIL} PATH)
+      list(FIND _protobuf_include_path ${ABS_PATH} _contains_already)
+      if(${_contains_already} EQUAL -1)
+          list(APPEND _protobuf_include_path -I ${ABS_PATH})
+      endif()
+    endforeach()
+  else()
+    set(_protobuf_include_path -I ${CMAKE_CURRENT_SOURCE_DIR})
+  endif()
+
+  if(DEFINED Protobuf_IMPORT_DIRS)
+    foreach(DIR ${Protobuf_IMPORT_DIRS})
+      get_filename_component(ABS_PATH ${DIR} ABSOLUTE)
+      list(FIND _protobuf_include_path ${ABS_PATH} _contains_already)
+      if(${_contains_already} EQUAL -1)
+          list(APPEND _protobuf_include_path -I ${ABS_PATH})
+      endif()
+    endforeach()
+  endif()
+
+  set(${SRCS})
+  foreach(FIL ${ARGN})
+    get_filename_component(ABS_FIL ${FIL} ABSOLUTE)
+    get_filename_component(FIL_WE ${FIL} NAME_WE)
+
+    list(APPEND ${SRCS} "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}_pb2.py")
+    add_custom_command(
+      OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}_pb2.py"
+      COMMAND  ${Protobuf_PROTOC_EXECUTABLE} --python_out ${CMAKE_CURRENT_BINARY_DIR} ${_protobuf_include_path} ${ABS_FIL}
+      DEPENDS ${ABS_FIL} ${Protobuf_PROTOC_EXECUTABLE}
+      COMMENT "Running Python protocol buffer compiler on ${FIL}"
+      VERBATIM )
+  endforeach()
+
+  set(${SRCS} ${${SRCS}} PARENT_SCOPE)
+endfunction()
+
+# Backwards compatibility
+# Define camel case versions of input variables
+foreach(UPPER
+    PROTOBUF_SRC_ROOT_FOLDER
+    PROTOBUF_IMPORT_DIRS
+    PROTOBUF_DEBUG
+    PROTOBUF_LIBRARY
+    PROTOBUF_PROTOC_LIBRARY
+    PROTOBUF_INCLUDE_DIR
+    PROTOBUF_PROTOC_EXECUTABLE
+    PROTOBUF_LIBRARY_DEBUG
+    PROTOBUF_PROTOC_LIBRARY_DEBUG
+    PROTOBUF_LITE_LIBRARY
+    PROTOBUF_LITE_LIBRARY_DEBUG
+    )
+    if (DEFINED ${UPPER})
+        string(REPLACE "PROTOBUF_" "Protobuf_" Camel ${UPPER})
+        if (NOT DEFINED ${Camel})
+            set(${Camel} ${${UPPER}})
+        endif()
+    endif()
+endforeach()
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(_PROTOBUF_ARCH_DIR x64/)
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+
+# Internal function: search for normal library as well as a debug one
+#    if the debug one is specified also include debug/optimized keywords
+#    in *_LIBRARIES variable
+function(_protobuf_find_libraries name filename)
+  if(${name}_LIBRARIES)
+    # Use result recorded by a previous call.
+    return()
+  elseif(${name}_LIBRARY)
+    # Honor cache entry used by CMake 3.5 and lower.
+    set(${name}_LIBRARIES "${${name}_LIBRARY}" PARENT_SCOPE)
+  else()
+    find_library(${name}_LIBRARY_RELEASE
+      NAMES ${filename}
+      PATHS ${Protobuf_SRC_ROOT_FOLDER}/vsprojects/${_PROTOBUF_ARCH_DIR}Release)
+    mark_as_advanced(${name}_LIBRARY_RELEASE)
+
+    find_library(${name}_LIBRARY_DEBUG
+      NAMES ${filename}
+      PATHS ${Protobuf_SRC_ROOT_FOLDER}/vsprojects/${_PROTOBUF_ARCH_DIR}Debug)
+    mark_as_advanced(${name}_LIBRARY_DEBUG)
+
+    select_library_configurations(${name})
+    set(${name}_LIBRARY "${${name}_LIBRARY}" PARENT_SCOPE)
+    set(${name}_LIBRARIES "${${name}_LIBRARIES}" PARENT_SCOPE)
+  endif()
+endfunction()
+
+# Internal function: find threads library
+function(_protobuf_find_threads)
+    set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
+    find_package(Threads)
+    if(Threads_FOUND)
+        list(APPEND Protobuf_LIBRARIES ${CMAKE_THREAD_LIBS_INIT})
+        set(Protobuf_LIBRARIES "${Protobuf_LIBRARIES}" PARENT_SCOPE)
+    endif()
+endfunction()
+
+#
+# Main.
+#
+
+# By default have PROTOBUF_GENERATE_CPP macro pass -I to protoc
+# for each directory where a proto file is referenced.
+if(NOT DEFINED PROTOBUF_GENERATE_CPP_APPEND_PATH)
+  set(PROTOBUF_GENERATE_CPP_APPEND_PATH TRUE)
+endif()
+
+
+# Google's provided vcproj files generate libraries with a "lib"
+# prefix on Windows
+if(MSVC)
+    set(Protobuf_ORIG_FIND_LIBRARY_PREFIXES "${CMAKE_FIND_LIBRARY_PREFIXES}")
+    set(CMAKE_FIND_LIBRARY_PREFIXES "lib" "")
+
+    find_path(Protobuf_SRC_ROOT_FOLDER protobuf.pc.in)
+endif()
+
+# The Protobuf library
+_protobuf_find_libraries(Protobuf protobuf)
+#DOC "The Google Protocol Buffers RELEASE Library"
+
+_protobuf_find_libraries(Protobuf_LITE protobuf-lite)
+
+# The Protobuf Protoc Library
+_protobuf_find_libraries(Protobuf_PROTOC protoc)
+
+# Restore original find library prefixes
+if(MSVC)
+    set(CMAKE_FIND_LIBRARY_PREFIXES "${Protobuf_ORIG_FIND_LIBRARY_PREFIXES}")
+endif()
+
+if(UNIX)
+    _protobuf_find_threads()
+endif()
+
+# Find the include directory
+find_path(Protobuf_INCLUDE_DIR
+    google/protobuf/service.h
+    PATHS ${Protobuf_SRC_ROOT_FOLDER}/src
+)
+mark_as_advanced(Protobuf_INCLUDE_DIR)
+
+# Find the protoc Executable
+find_program(Protobuf_PROTOC_EXECUTABLE
+    NAMES protoc
+    DOC "The Google Protocol Buffers Compiler"
+    PATHS
+    ${Protobuf_SRC_ROOT_FOLDER}/vsprojects/${_PROTOBUF_ARCH_DIR}Release
+    ${Protobuf_SRC_ROOT_FOLDER}/vsprojects/${_PROTOBUF_ARCH_DIR}Debug
+)
+mark_as_advanced(Protobuf_PROTOC_EXECUTABLE)
+
+if(Protobuf_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+        "requested version of Google Protobuf is ${Protobuf_FIND_VERSION}")
+endif()
+
+if(Protobuf_INCLUDE_DIR)
+  set(_PROTOBUF_COMMON_HEADER ${Protobuf_INCLUDE_DIR}/google/protobuf/stubs/common.h)
+
+  if(Protobuf_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+                   "location of common.h: ${_PROTOBUF_COMMON_HEADER}")
+  endif()
+
+  set(Protobuf_VERSION "")
+  set(Protobuf_LIB_VERSION "")
+  file(STRINGS ${_PROTOBUF_COMMON_HEADER} _PROTOBUF_COMMON_H_CONTENTS REGEX "#define[ \t]+GOOGLE_PROTOBUF_VERSION[ \t]+")
+  if(_PROTOBUF_COMMON_H_CONTENTS MATCHES "#define[ \t]+GOOGLE_PROTOBUF_VERSION[ \t]+([0-9]+)")
+      set(Protobuf_LIB_VERSION "${CMAKE_MATCH_1}")
+  endif()
+  unset(_PROTOBUF_COMMON_H_CONTENTS)
+
+  math(EXPR _PROTOBUF_MAJOR_VERSION "${Protobuf_LIB_VERSION} / 1000000")
+  math(EXPR _PROTOBUF_MINOR_VERSION "${Protobuf_LIB_VERSION} / 1000 % 1000")
+  math(EXPR _PROTOBUF_SUBMINOR_VERSION "${Protobuf_LIB_VERSION} % 1000")
+  set(Protobuf_VERSION "${_PROTOBUF_MAJOR_VERSION}.${_PROTOBUF_MINOR_VERSION}.${_PROTOBUF_SUBMINOR_VERSION}")
+
+  if(Protobuf_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+        "${_PROTOBUF_COMMON_HEADER} reveals protobuf ${Protobuf_VERSION}")
+  endif()
+
+  # Check Protobuf compiler version to be aligned with libraries version
+  execute_process(COMMAND ${Protobuf_PROTOC_EXECUTABLE} --version
+                  OUTPUT_VARIABLE _PROTOBUF_PROTOC_EXECUTABLE_VERSION)
+
+  if("${_PROTOBUF_PROTOC_EXECUTABLE_VERSION}" MATCHES "libprotoc ([0-9.]+)")
+    set(_PROTOBUF_PROTOC_EXECUTABLE_VERSION "${CMAKE_MATCH_1}")
+  endif()
+
+  if(Protobuf_DEBUG)
+    message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
+        "${Protobuf_PROTOC_EXECUTABLE} reveals version ${_PROTOBUF_PROTOC_EXECUTABLE_VERSION}")
+  endif()
+
+  if(NOT "${_PROTOBUF_PROTOC_EXECUTABLE_VERSION}" VERSION_EQUAL "${Protobuf_VERSION}")
+      message(WARNING "Protobuf compiler version ${_PROTOBUF_PROTOC_EXECUTABLE_VERSION}"
+          " doesn't match library version ${Protobuf_VERSION}")
+  endif()
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(Protobuf
+    REQUIRED_VARS Protobuf_LIBRARIES Protobuf_INCLUDE_DIR
+    VERSION_VAR Protobuf_VERSION
+)
+
+if(Protobuf_FOUND)
+    set(Protobuf_INCLUDE_DIRS ${Protobuf_INCLUDE_DIR})
+endif()
+
+# Backwards compatibility
+# Define upper case versions of output variables
+foreach(Camel
+    Protobuf_SRC_ROOT_FOLDER
+    Protobuf_IMPORT_DIRS
+    Protobuf_DEBUG
+    Protobuf_INCLUDE_DIRS
+    Protobuf_LIBRARIES
+    Protobuf_PROTOC_LIBRARIES
+    Protobuf_LITE_LIBRARIES
+    Protobuf_LIBRARY
+    Protobuf_PROTOC_LIBRARY
+    Protobuf_INCLUDE_DIR
+    Protobuf_PROTOC_EXECUTABLE
+    Protobuf_LIBRARY_DEBUG
+    Protobuf_PROTOC_LIBRARY_DEBUG
+    Protobuf_LITE_LIBRARY
+    Protobuf_LITE_LIBRARY_DEBUG
+    )
+    string(TOUPPER ${Camel} UPPER)
+    set(${UPPER} ${${Camel}})
+endforeach()
diff --git a/share/cmake-3.6/Modules/FindPythonInterp.cmake b/share/cmake-3.6/Modules/FindPythonInterp.cmake
new file mode 100644
index 0000000..e194185
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindPythonInterp.cmake
@@ -0,0 +1,165 @@
+#.rst:
+# FindPythonInterp
+# ----------------
+#
+# Find python interpreter
+#
+# This module finds if Python interpreter is installed and determines
+# where the executables are.  This code sets the following variables:
+#
+# ::
+#
+#   PYTHONINTERP_FOUND         - Was the Python executable found
+#   PYTHON_EXECUTABLE          - path to the Python interpreter
+#
+#
+#
+# ::
+#
+#   PYTHON_VERSION_STRING      - Python version found e.g. 2.5.2
+#   PYTHON_VERSION_MAJOR       - Python major version found e.g. 2
+#   PYTHON_VERSION_MINOR       - Python minor version found e.g. 5
+#   PYTHON_VERSION_PATCH       - Python patch version found e.g. 2
+#
+#
+#
+# The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
+# of version numbers that should be taken into account when searching
+# for Python.  You need to set this variable before calling
+# find_package(PythonInterp).
+#
+# If calling both ``find_package(PythonInterp)`` and
+# ``find_package(PythonLibs)``, call ``find_package(PythonInterp)`` first to
+# get the currently active Python version by default with a consistent version
+# of PYTHON_LIBRARIES.
+
+#=============================================================================
+# Copyright 2005-2010 Kitware, Inc.
+# Copyright 2011 Bjoern Ricks <bjoern.ricks@gmail.com>
+# Copyright 2012 Rolf Eike Beer <eike@sf-mail.de>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+unset(_Python_NAMES)
+
+set(_PYTHON1_VERSIONS 1.6 1.5)
+set(_PYTHON2_VERSIONS 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0)
+set(_PYTHON3_VERSIONS 3.6 3.5 3.4 3.3 3.2 3.1 3.0)
+
+if(PythonInterp_FIND_VERSION)
+    if(PythonInterp_FIND_VERSION_COUNT GREATER 1)
+        set(_PYTHON_FIND_MAJ_MIN "${PythonInterp_FIND_VERSION_MAJOR}.${PythonInterp_FIND_VERSION_MINOR}")
+        list(APPEND _Python_NAMES
+             python${_PYTHON_FIND_MAJ_MIN}
+             python${PythonInterp_FIND_VERSION_MAJOR})
+        unset(_PYTHON_FIND_OTHER_VERSIONS)
+        if(NOT PythonInterp_FIND_VERSION_EXACT)
+            foreach(_PYTHON_V ${_PYTHON${PythonInterp_FIND_VERSION_MAJOR}_VERSIONS})
+                if(NOT _PYTHON_V VERSION_LESS _PYTHON_FIND_MAJ_MIN)
+                    list(APPEND _PYTHON_FIND_OTHER_VERSIONS ${_PYTHON_V})
+                endif()
+             endforeach()
+        endif()
+        unset(_PYTHON_FIND_MAJ_MIN)
+    else()
+        list(APPEND _Python_NAMES python${PythonInterp_FIND_VERSION_MAJOR})
+        set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON${PythonInterp_FIND_VERSION_MAJOR}_VERSIONS})
+    endif()
+else()
+    set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON3_VERSIONS} ${_PYTHON2_VERSIONS} ${_PYTHON1_VERSIONS})
+endif()
+find_program(PYTHON_EXECUTABLE NAMES ${_Python_NAMES})
+
+# Set up the versions we know about, in the order we will search. Always add
+# the user supplied additional versions to the front.
+set(_Python_VERSIONS ${Python_ADDITIONAL_VERSIONS})
+# If FindPythonInterp has already found the major and minor version,
+# insert that version next to get consistent versions of the interpreter and
+# library.
+if(DEFINED PYTHONLIBS_VERSION_STRING)
+  string(REPLACE "." ";" _PYTHONLIBS_VERSION "${PYTHONLIBS_VERSION_STRING}")
+  list(GET _PYTHONLIBS_VERSION 0 _PYTHONLIBS_VERSION_MAJOR)
+  list(GET _PYTHONLIBS_VERSION 1 _PYTHONLIBS_VERSION_MINOR)
+  list(APPEND _Python_VERSIONS ${_PYTHONLIBS_VERSION_MAJOR}.${_PYTHONLIBS_VERSION_MINOR})
+endif()
+# Search for the current active python version first
+list(APPEND _Python_VERSIONS ";")
+list(APPEND _Python_VERSIONS ${_PYTHON_FIND_OTHER_VERSIONS})
+
+unset(_PYTHON_FIND_OTHER_VERSIONS)
+unset(_PYTHON1_VERSIONS)
+unset(_PYTHON2_VERSIONS)
+unset(_PYTHON3_VERSIONS)
+
+# Search for newest python version if python executable isn't found
+if(NOT PYTHON_EXECUTABLE)
+    foreach(_CURRENT_VERSION IN LISTS _Python_VERSIONS)
+      set(_Python_NAMES python${_CURRENT_VERSION})
+      if(WIN32)
+        list(APPEND _Python_NAMES python)
+      endif()
+      find_program(PYTHON_EXECUTABLE
+        NAMES ${_Python_NAMES}
+        PATHS [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]
+        )
+    endforeach()
+endif()
+
+# determine python version string
+if(PYTHON_EXECUTABLE)
+    execute_process(COMMAND "${PYTHON_EXECUTABLE}" -c
+                            "import sys; sys.stdout.write(';'.join([str(x) for x in sys.version_info[:3]]))"
+                    OUTPUT_VARIABLE _VERSION
+                    RESULT_VARIABLE _PYTHON_VERSION_RESULT
+                    ERROR_QUIET)
+    if(NOT _PYTHON_VERSION_RESULT)
+        string(REPLACE ";" "." PYTHON_VERSION_STRING "${_VERSION}")
+        list(GET _VERSION 0 PYTHON_VERSION_MAJOR)
+        list(GET _VERSION 1 PYTHON_VERSION_MINOR)
+        list(GET _VERSION 2 PYTHON_VERSION_PATCH)
+        if(PYTHON_VERSION_PATCH EQUAL 0)
+            # it's called "Python 2.7", not "2.7.0"
+            string(REGEX REPLACE "\\.0$" "" PYTHON_VERSION_STRING "${PYTHON_VERSION_STRING}")
+        endif()
+    else()
+        # sys.version predates sys.version_info, so use that
+        execute_process(COMMAND "${PYTHON_EXECUTABLE}" -c "import sys; sys.stdout.write(sys.version)"
+                        OUTPUT_VARIABLE _VERSION
+                        RESULT_VARIABLE _PYTHON_VERSION_RESULT
+                        ERROR_QUIET)
+        if(NOT _PYTHON_VERSION_RESULT)
+            string(REGEX REPLACE " .*" "" PYTHON_VERSION_STRING "${_VERSION}")
+            string(REGEX REPLACE "^([0-9]+)\\.[0-9]+.*" "\\1" PYTHON_VERSION_MAJOR "${PYTHON_VERSION_STRING}")
+            string(REGEX REPLACE "^[0-9]+\\.([0-9])+.*" "\\1" PYTHON_VERSION_MINOR "${PYTHON_VERSION_STRING}")
+            if(PYTHON_VERSION_STRING MATCHES "^[0-9]+\\.[0-9]+\\.([0-9]+)")
+                set(PYTHON_VERSION_PATCH "${CMAKE_MATCH_1}")
+            else()
+                set(PYTHON_VERSION_PATCH "0")
+            endif()
+        else()
+            # sys.version was first documented for Python 1.5, so assume
+            # this is older.
+            set(PYTHON_VERSION_STRING "1.4")
+            set(PYTHON_VERSION_MAJOR "1")
+            set(PYTHON_VERSION_MINOR "4")
+            set(PYTHON_VERSION_PATCH "0")
+        endif()
+    endif()
+    unset(_PYTHON_VERSION_RESULT)
+    unset(_VERSION)
+endif()
+
+# handle the QUIETLY and REQUIRED arguments and set PYTHONINTERP_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(PythonInterp REQUIRED_VARS PYTHON_EXECUTABLE VERSION_VAR PYTHON_VERSION_STRING)
+
+mark_as_advanced(PYTHON_EXECUTABLE)
diff --git a/share/cmake-3.6/Modules/FindPythonLibs.cmake b/share/cmake-3.6/Modules/FindPythonLibs.cmake
new file mode 100644
index 0000000..ab92f86
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindPythonLibs.cmake
@@ -0,0 +1,354 @@
+#.rst:
+# FindPythonLibs
+# --------------
+#
+# Find python libraries
+#
+# This module finds if Python is installed and determines where the
+# include files and libraries are.  It also determines what the name of
+# the library is.  This code sets the following variables:
+#
+# ::
+#
+#   PYTHONLIBS_FOUND           - have the Python libs been found
+#   PYTHON_LIBRARIES           - path to the python library
+#   PYTHON_INCLUDE_PATH        - path to where Python.h is found (deprecated)
+#   PYTHON_INCLUDE_DIRS        - path to where Python.h is found
+#   PYTHON_DEBUG_LIBRARIES     - path to the debug library (deprecated)
+#   PYTHONLIBS_VERSION_STRING  - version of the Python libs found (since CMake 2.8.8)
+#
+#
+#
+# The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
+# of version numbers that should be taken into account when searching
+# for Python.  You need to set this variable before calling
+# find_package(PythonLibs).
+#
+# If you'd like to specify the installation of Python to use, you should
+# modify the following cache variables:
+#
+# ::
+#
+#   PYTHON_LIBRARY             - path to the python library
+#   PYTHON_INCLUDE_DIR         - path to where Python.h is found
+#
+# If calling both ``find_package(PythonInterp)`` and
+# ``find_package(PythonLibs)``, call ``find_package(PythonInterp)`` first to
+# get the currently active Python version by default with a consistent version
+# of PYTHON_LIBRARIES.
+
+#=============================================================================
+# Copyright 2001-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Use the executable's path as a hint
+set(_Python_LIBRARY_PATH_HINT)
+if(PYTHON_EXECUTABLE)
+  if(WIN32)
+    get_filename_component(_Python_PREFIX ${PYTHON_EXECUTABLE} PATH)
+    if(_Python_PREFIX)
+      set(_Python_LIBRARY_PATH_HINT ${_Python_PREFIX}/libs)
+    endif()
+    unset(_Python_PREFIX)
+  else()
+    get_filename_component(_Python_PREFIX ${PYTHON_EXECUTABLE} PATH)
+    get_filename_component(_Python_PREFIX ${_Python_PREFIX} PATH)
+    if(_Python_PREFIX)
+      set(_Python_LIBRARY_PATH_HINT ${_Python_PREFIX}/lib)
+    endif()
+    unset(_Python_PREFIX)
+  endif()
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindFrameworks.cmake)
+# Search for the python framework on Apple.
+CMAKE_FIND_FRAMEWORKS(Python)
+
+# Save CMAKE_FIND_FRAMEWORK
+if(DEFINED CMAKE_FIND_FRAMEWORK)
+  set(_PythonLibs_CMAKE_FIND_FRAMEWORK ${CMAKE_FIND_FRAMEWORK})
+else()
+  unset(_PythonLibs_CMAKE_FIND_FRAMEWORK)
+endif()
+# To avoid picking up the system Python.h pre-maturely.
+set(CMAKE_FIND_FRAMEWORK LAST)
+
+set(_PYTHON1_VERSIONS 1.6 1.5)
+set(_PYTHON2_VERSIONS 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0)
+set(_PYTHON3_VERSIONS 3.6 3.5 3.4 3.3 3.2 3.1 3.0)
+
+if(PythonLibs_FIND_VERSION)
+    if(PythonLibs_FIND_VERSION_COUNT GREATER 1)
+        set(_PYTHON_FIND_MAJ_MIN "${PythonLibs_FIND_VERSION_MAJOR}.${PythonLibs_FIND_VERSION_MINOR}")
+        unset(_PYTHON_FIND_OTHER_VERSIONS)
+        if(PythonLibs_FIND_VERSION_EXACT)
+            if(_PYTHON_FIND_MAJ_MIN STREQUAL PythonLibs_FIND_VERSION)
+                set(_PYTHON_FIND_OTHER_VERSIONS "${PythonLibs_FIND_VERSION}")
+            else()
+                set(_PYTHON_FIND_OTHER_VERSIONS "${PythonLibs_FIND_VERSION}" "${_PYTHON_FIND_MAJ_MIN}")
+            endif()
+        else()
+            foreach(_PYTHON_V ${_PYTHON${PythonLibs_FIND_VERSION_MAJOR}_VERSIONS})
+                if(NOT _PYTHON_V VERSION_LESS _PYTHON_FIND_MAJ_MIN)
+                    list(APPEND _PYTHON_FIND_OTHER_VERSIONS ${_PYTHON_V})
+                endif()
+             endforeach()
+        endif()
+        unset(_PYTHON_FIND_MAJ_MIN)
+    else()
+        set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON${PythonLibs_FIND_VERSION_MAJOR}_VERSIONS})
+    endif()
+else()
+    set(_PYTHON_FIND_OTHER_VERSIONS ${_PYTHON3_VERSIONS} ${_PYTHON2_VERSIONS} ${_PYTHON1_VERSIONS})
+endif()
+
+# Set up the versions we know about, in the order we will search. Always add
+# the user supplied additional versions to the front.
+# If FindPythonInterp has already found the major and minor version,
+# insert that version between the user supplied versions and the stock
+# version list.
+set(_Python_VERSIONS ${Python_ADDITIONAL_VERSIONS})
+if(DEFINED PYTHON_VERSION_MAJOR AND DEFINED PYTHON_VERSION_MINOR)
+  list(APPEND _Python_VERSIONS ${PYTHON_VERSION_MAJOR}.${PYTHON_VERSION_MINOR})
+endif()
+list(APPEND _Python_VERSIONS ${_PYTHON_FIND_OTHER_VERSIONS})
+
+unset(_PYTHON_FIND_OTHER_VERSIONS)
+unset(_PYTHON1_VERSIONS)
+unset(_PYTHON2_VERSIONS)
+unset(_PYTHON3_VERSIONS)
+
+foreach(_CURRENT_VERSION ${_Python_VERSIONS})
+  string(REPLACE "." "" _CURRENT_VERSION_NO_DOTS ${_CURRENT_VERSION})
+  if(WIN32)
+    find_library(PYTHON_DEBUG_LIBRARY
+      NAMES python${_CURRENT_VERSION_NO_DOTS}_d python
+      HINTS ${_Python_LIBRARY_PATH_HINT}
+      PATHS
+      [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs/Debug
+      [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs/Debug
+      [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
+      [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
+      )
+  endif()
+
+  set(PYTHON_FRAMEWORK_LIBRARIES)
+  if(Python_FRAMEWORKS AND NOT PYTHON_LIBRARY)
+    foreach(dir ${Python_FRAMEWORKS})
+      list(APPEND PYTHON_FRAMEWORK_LIBRARIES
+           ${dir}/Versions/${_CURRENT_VERSION}/lib)
+    endforeach()
+  endif()
+  find_library(PYTHON_LIBRARY
+    NAMES
+      python${_CURRENT_VERSION_NO_DOTS}
+      python${_CURRENT_VERSION}mu
+      python${_CURRENT_VERSION}m
+      python${_CURRENT_VERSION}u
+      python${_CURRENT_VERSION}
+    HINTS
+      ${_Python_LIBRARY_PATH_HINT}
+    PATHS
+      ${PYTHON_FRAMEWORK_LIBRARIES}
+      [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
+      [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/libs
+    # Avoid finding the .dll in the PATH.  We want the .lib.
+    NO_SYSTEM_ENVIRONMENT_PATH
+  )
+  # Look for the static library in the Python config directory
+  find_library(PYTHON_LIBRARY
+    NAMES python${_CURRENT_VERSION_NO_DOTS} python${_CURRENT_VERSION}
+    # Avoid finding the .dll in the PATH.  We want the .lib.
+    NO_SYSTEM_ENVIRONMENT_PATH
+    # This is where the static library is usually located
+    PATH_SUFFIXES python${_CURRENT_VERSION}/config
+  )
+
+  # Don't search for include dir until library location is known
+  if(PYTHON_LIBRARY)
+
+    # Use the library's install prefix as a hint
+    set(_Python_INCLUDE_PATH_HINT)
+    get_filename_component(_Python_PREFIX ${PYTHON_LIBRARY} PATH)
+    get_filename_component(_Python_PREFIX ${_Python_PREFIX} PATH)
+    if(_Python_PREFIX)
+      set(_Python_INCLUDE_PATH_HINT ${_Python_PREFIX}/include)
+    endif()
+    unset(_Python_PREFIX)
+
+    # Add framework directories to the search paths
+    set(PYTHON_FRAMEWORK_INCLUDES)
+    if(Python_FRAMEWORKS AND NOT PYTHON_INCLUDE_DIR)
+      foreach(dir ${Python_FRAMEWORKS})
+        list(APPEND PYTHON_FRAMEWORK_INCLUDES
+          ${dir}/Versions/${_CURRENT_VERSION}/include)
+      endforeach()
+    endif()
+
+    find_path(PYTHON_INCLUDE_DIR
+      NAMES Python.h
+      HINTS
+        ${_Python_INCLUDE_PATH_HINT}
+      PATHS
+        ${PYTHON_FRAMEWORK_INCLUDES}
+        [HKEY_LOCAL_MACHINE\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/include
+        [HKEY_CURRENT_USER\\SOFTWARE\\Python\\PythonCore\\${_CURRENT_VERSION}\\InstallPath]/include
+      PATH_SUFFIXES
+        python${_CURRENT_VERSION}mu
+        python${_CURRENT_VERSION}m
+        python${_CURRENT_VERSION}u
+        python${_CURRENT_VERSION}
+    )
+  endif()
+
+  # For backward compatibility, set PYTHON_INCLUDE_PATH.
+  set(PYTHON_INCLUDE_PATH "${PYTHON_INCLUDE_DIR}")
+
+  if(PYTHON_INCLUDE_DIR AND EXISTS "${PYTHON_INCLUDE_DIR}/patchlevel.h")
+    file(STRINGS "${PYTHON_INCLUDE_DIR}/patchlevel.h" python_version_str
+         REGEX "^#define[ \t]+PY_VERSION[ \t]+\"[^\"]+\"")
+    string(REGEX REPLACE "^#define[ \t]+PY_VERSION[ \t]+\"([^\"]+)\".*" "\\1"
+                         PYTHONLIBS_VERSION_STRING "${python_version_str}")
+    unset(python_version_str)
+  endif()
+
+  if(PYTHON_LIBRARY AND PYTHON_INCLUDE_DIR)
+    break()
+  endif()
+endforeach()
+
+unset(_Python_INCLUDE_PATH_HINT)
+unset(_Python_LIBRARY_PATH_HINT)
+
+mark_as_advanced(
+  PYTHON_DEBUG_LIBRARY
+  PYTHON_LIBRARY
+  PYTHON_INCLUDE_DIR
+)
+
+# We use PYTHON_INCLUDE_DIR, PYTHON_LIBRARY and PYTHON_DEBUG_LIBRARY for the
+# cache entries because they are meant to specify the location of a single
+# library. We now set the variables listed by the documentation for this
+# module.
+set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
+set(PYTHON_DEBUG_LIBRARIES "${PYTHON_DEBUG_LIBRARY}")
+
+# These variables have been historically named in this module different from
+# what SELECT_LIBRARY_CONFIGURATIONS() expects.
+set(PYTHON_LIBRARY_DEBUG "${PYTHON_DEBUG_LIBRARY}")
+set(PYTHON_LIBRARY_RELEASE "${PYTHON_LIBRARY}")
+include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+SELECT_LIBRARY_CONFIGURATIONS(PYTHON)
+# SELECT_LIBRARY_CONFIGURATIONS() sets ${PREFIX}_FOUND if it has a library.
+# Unset this, this prefix doesn't match the module prefix, they are different
+# for historical reasons.
+unset(PYTHON_FOUND)
+
+# Restore CMAKE_FIND_FRAMEWORK
+if(DEFINED _PythonLibs_CMAKE_FIND_FRAMEWORK)
+  set(CMAKE_FIND_FRAMEWORK ${_PythonLibs_CMAKE_FIND_FRAMEWORK})
+  unset(_PythonLibs_CMAKE_FIND_FRAMEWORK)
+else()
+  unset(CMAKE_FIND_FRAMEWORK)
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(PythonLibs
+                                  REQUIRED_VARS PYTHON_LIBRARIES PYTHON_INCLUDE_DIRS
+                                  VERSION_VAR PYTHONLIBS_VERSION_STRING)
+
+# PYTHON_ADD_MODULE(<name> src1 src2 ... srcN) is used to build modules for python.
+# PYTHON_WRITE_MODULES_HEADER(<filename>) writes a header file you can include
+# in your sources to initialize the static python modules
+function(PYTHON_ADD_MODULE _NAME )
+  get_property(_TARGET_SUPPORTS_SHARED_LIBS
+    GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS)
+  option(PYTHON_ENABLE_MODULE_${_NAME} "Add module ${_NAME}" TRUE)
+  option(PYTHON_MODULE_${_NAME}_BUILD_SHARED
+    "Add module ${_NAME} shared" ${_TARGET_SUPPORTS_SHARED_LIBS})
+
+  # Mark these options as advanced
+  mark_as_advanced(PYTHON_ENABLE_MODULE_${_NAME}
+    PYTHON_MODULE_${_NAME}_BUILD_SHARED)
+
+  if(PYTHON_ENABLE_MODULE_${_NAME})
+    if(PYTHON_MODULE_${_NAME}_BUILD_SHARED)
+      set(PY_MODULE_TYPE MODULE)
+    else()
+      set(PY_MODULE_TYPE STATIC)
+      set_property(GLOBAL  APPEND  PROPERTY  PY_STATIC_MODULES_LIST ${_NAME})
+    endif()
+
+    set_property(GLOBAL  APPEND  PROPERTY  PY_MODULES_LIST ${_NAME})
+    add_library(${_NAME} ${PY_MODULE_TYPE} ${ARGN})
+#    target_link_libraries(${_NAME} ${PYTHON_LIBRARIES})
+
+    if(PYTHON_MODULE_${_NAME}_BUILD_SHARED)
+      set_target_properties(${_NAME} PROPERTIES PREFIX "${PYTHON_MODULE_PREFIX}")
+      if(WIN32 AND NOT CYGWIN)
+        set_target_properties(${_NAME} PROPERTIES SUFFIX ".pyd")
+      endif()
+    endif()
+
+  endif()
+endfunction()
+
+function(PYTHON_WRITE_MODULES_HEADER _filename)
+
+  get_property(PY_STATIC_MODULES_LIST  GLOBAL  PROPERTY PY_STATIC_MODULES_LIST)
+
+  get_filename_component(_name "${_filename}" NAME)
+  string(REPLACE "." "_" _name "${_name}")
+  string(TOUPPER ${_name} _nameUpper)
+  set(_filename ${CMAKE_CURRENT_BINARY_DIR}/${_filename})
+
+  set(_filenameTmp "${_filename}.in")
+  file(WRITE ${_filenameTmp} "/*Created by cmake, do not edit, changes will be lost*/\n")
+  file(APPEND ${_filenameTmp}
+"#ifndef ${_nameUpper}
+#define ${_nameUpper}
+
+#include <Python.h>
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif /* __cplusplus */
+
+")
+
+  foreach(_currentModule ${PY_STATIC_MODULES_LIST})
+    file(APPEND ${_filenameTmp} "extern void init${PYTHON_MODULE_PREFIX}${_currentModule}(void);\n\n")
+  endforeach()
+
+  file(APPEND ${_filenameTmp}
+"#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+")
+
+
+  foreach(_currentModule ${PY_STATIC_MODULES_LIST})
+    file(APPEND ${_filenameTmp} "int ${_name}_${_currentModule}(void) \n{\n  static char name[]=\"${PYTHON_MODULE_PREFIX}${_currentModule}\"; return PyImport_AppendInittab(name, init${PYTHON_MODULE_PREFIX}${_currentModule});\n}\n\n")
+  endforeach()
+
+  file(APPEND ${_filenameTmp} "void ${_name}_LoadAllPythonModules(void)\n{\n")
+  foreach(_currentModule ${PY_STATIC_MODULES_LIST})
+    file(APPEND ${_filenameTmp} "  ${_name}_${_currentModule}();\n")
+  endforeach()
+  file(APPEND ${_filenameTmp} "}\n\n")
+  file(APPEND ${_filenameTmp} "#ifndef EXCLUDE_LOAD_ALL_FUNCTION\nvoid CMakeLoadAllPythonModules(void)\n{\n  ${_name}_LoadAllPythonModules();\n}\n#endif\n\n#endif\n")
+
+# with configure_file() cmake complains that you may not use a file created using file(WRITE) as input file for configure_file()
+  execute_process(COMMAND ${CMAKE_COMMAND} -E copy_if_different "${_filenameTmp}" "${_filename}" OUTPUT_QUIET ERROR_QUIET)
+
+endfunction()
diff --git a/share/cmake-3.2/Modules/FindQt.cmake b/share/cmake-3.6/Modules/FindQt.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindQt.cmake
rename to share/cmake-3.6/Modules/FindQt.cmake
diff --git a/share/cmake-3.2/Modules/FindQt3.cmake b/share/cmake-3.6/Modules/FindQt3.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindQt3.cmake
rename to share/cmake-3.6/Modules/FindQt3.cmake
diff --git a/share/cmake-3.2/Modules/FindQt4.cmake b/share/cmake-3.6/Modules/FindQt4.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindQt4.cmake
rename to share/cmake-3.6/Modules/FindQt4.cmake
diff --git a/share/cmake-3.2/Modules/FindQuickTime.cmake b/share/cmake-3.6/Modules/FindQuickTime.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindQuickTime.cmake
rename to share/cmake-3.6/Modules/FindQuickTime.cmake
diff --git a/share/cmake-3.2/Modules/FindRTI.cmake b/share/cmake-3.6/Modules/FindRTI.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindRTI.cmake
rename to share/cmake-3.6/Modules/FindRTI.cmake
diff --git a/share/cmake-3.6/Modules/FindRuby.cmake b/share/cmake-3.6/Modules/FindRuby.cmake
new file mode 100644
index 0000000..e5ea210
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindRuby.cmake
@@ -0,0 +1,286 @@
+#.rst:
+# FindRuby
+# --------
+#
+# Find Ruby
+#
+# This module finds if Ruby is installed and determines where the
+# include files and libraries are.  Ruby 1.8, 1.9, 2.0 and 2.1 are
+# supported.
+#
+# The minimum required version of Ruby can be specified using the
+# standard syntax, e.g.  find_package(Ruby 1.8)
+#
+# It also determines what the name of the library is.  This code sets
+# the following variables:
+#
+# ``RUBY_EXECUTABLE``
+#   full path to the ruby binary
+# ``RUBY_INCLUDE_DIRS``
+#   include dirs to be used when using the ruby library
+# ``RUBY_LIBRARY``
+#   full path to the ruby library
+# ``RUBY_VERSION``
+#   the version of ruby which was found, e.g. "1.8.7"
+# ``RUBY_FOUND``
+#   set to true if ruby ws found successfully
+#
+# Also:
+#
+# ``RUBY_INCLUDE_PATH``
+#   same as RUBY_INCLUDE_DIRS, only provided for compatibility reasons, don't use it
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+# Copyright 2008-2009 Alexander Neundorf <neundorf@kde.org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#   RUBY_ARCHDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"archdir"@:>@)'`
+#   RUBY_SITEARCHDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"sitearchdir"@:>@)'`
+#   RUBY_SITEDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"sitelibdir"@:>@)'`
+#   RUBY_LIBDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"libdir"@:>@)'`
+#   RUBY_LIBRUBYARG=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"LIBRUBYARG_SHARED"@:>@)'`
+
+# uncomment the following line to get debug output for this file
+# set(_RUBY_DEBUG_OUTPUT TRUE)
+
+# Determine the list of possible names of the ruby executable depending
+# on which version of ruby is required
+set(_RUBY_POSSIBLE_EXECUTABLE_NAMES ruby)
+
+# if 1.9 is required, don't look for ruby18 and ruby1.8, default to version 1.8
+if(DEFINED Ruby_FIND_VERSION_MAJOR AND DEFINED Ruby_FIND_VERSION_MINOR)
+   set(Ruby_FIND_VERSION_SHORT_NODOT "${Ruby_FIND_VERSION_MAJOR}${RUBY_FIND_VERSION_MINOR}")
+   # we can't construct that if only major version is given
+   set(_RUBY_POSSIBLE_EXECUTABLE_NAMES
+       ruby${Ruby_FIND_VERSION_MAJOR}.${Ruby_FIND_VERSION_MINOR}
+       ruby${Ruby_FIND_VERSION_MAJOR}${Ruby_FIND_VERSION_MINOR}
+       ${_RUBY_POSSIBLE_EXECUTABLE_NAMES})
+else()
+   set(Ruby_FIND_VERSION_SHORT_NODOT "18")
+endif()
+
+if(NOT Ruby_FIND_VERSION_EXACT)
+  list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby2.1 ruby21)
+  list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby2.0 ruby20)
+  list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby1.9 ruby19)
+
+  # if we want a version below 1.9, also look for ruby 1.8
+  if("${Ruby_FIND_VERSION_SHORT_NODOT}" VERSION_LESS "19")
+    list(APPEND _RUBY_POSSIBLE_EXECUTABLE_NAMES ruby1.8 ruby18)
+  endif()
+
+  list(REMOVE_DUPLICATES _RUBY_POSSIBLE_EXECUTABLE_NAMES)
+endif()
+
+find_program(RUBY_EXECUTABLE NAMES ${_RUBY_POSSIBLE_EXECUTABLE_NAMES})
+
+if(RUBY_EXECUTABLE  AND NOT  RUBY_VERSION_MAJOR)
+  function(_RUBY_CONFIG_VAR RBVAR OUTVAR)
+    execute_process(COMMAND ${RUBY_EXECUTABLE} -r rbconfig -e "print RbConfig::CONFIG['${RBVAR}']"
+      RESULT_VARIABLE _RUBY_SUCCESS
+      OUTPUT_VARIABLE _RUBY_OUTPUT
+      ERROR_QUIET)
+    if(_RUBY_SUCCESS OR _RUBY_OUTPUT STREQUAL "")
+      execute_process(COMMAND ${RUBY_EXECUTABLE} -r rbconfig -e "print Config::CONFIG['${RBVAR}']"
+        RESULT_VARIABLE _RUBY_SUCCESS
+        OUTPUT_VARIABLE _RUBY_OUTPUT
+        ERROR_QUIET)
+    endif()
+    set(${OUTVAR} "${_RUBY_OUTPUT}" PARENT_SCOPE)
+  endfunction()
+
+
+  # query the ruby version
+   _RUBY_CONFIG_VAR("MAJOR" RUBY_VERSION_MAJOR)
+   _RUBY_CONFIG_VAR("MINOR" RUBY_VERSION_MINOR)
+   _RUBY_CONFIG_VAR("TEENY" RUBY_VERSION_PATCH)
+
+   # query the different directories
+   _RUBY_CONFIG_VAR("archdir" RUBY_ARCH_DIR)
+   _RUBY_CONFIG_VAR("arch" RUBY_ARCH)
+   _RUBY_CONFIG_VAR("rubyhdrdir" RUBY_HDR_DIR)
+   _RUBY_CONFIG_VAR("rubyarchhdrdir" RUBY_ARCHHDR_DIR)
+   _RUBY_CONFIG_VAR("libdir" RUBY_POSSIBLE_LIB_DIR)
+   _RUBY_CONFIG_VAR("rubylibdir" RUBY_RUBY_LIB_DIR)
+
+   # site_ruby
+   _RUBY_CONFIG_VAR("sitearchdir" RUBY_SITEARCH_DIR)
+   _RUBY_CONFIG_VAR("sitelibdir" RUBY_SITELIB_DIR)
+
+   # vendor_ruby available ?
+   execute_process(COMMAND ${RUBY_EXECUTABLE} -r vendor-specific -e "print 'true'"
+      OUTPUT_VARIABLE RUBY_HAS_VENDOR_RUBY  ERROR_QUIET)
+
+   if(RUBY_HAS_VENDOR_RUBY)
+      _RUBY_CONFIG_VAR("vendorlibdir" RUBY_VENDORLIB_DIR)
+      _RUBY_CONFIG_VAR("vendorarchdir" RUBY_VENDORARCH_DIR)
+   endif()
+
+   # save the results in the cache so we don't have to run ruby the next time again
+   set(RUBY_VERSION_MAJOR    ${RUBY_VERSION_MAJOR}    CACHE PATH "The Ruby major version" FORCE)
+   set(RUBY_VERSION_MINOR    ${RUBY_VERSION_MINOR}    CACHE PATH "The Ruby minor version" FORCE)
+   set(RUBY_VERSION_PATCH    ${RUBY_VERSION_PATCH}    CACHE PATH "The Ruby patch version" FORCE)
+   set(RUBY_ARCH_DIR         ${RUBY_ARCH_DIR}         CACHE PATH "The Ruby arch dir" FORCE)
+   set(RUBY_HDR_DIR          ${RUBY_HDR_DIR}          CACHE PATH "The Ruby header dir (1.9+)" FORCE)
+   set(RUBY_ARCHHDR_DIR      ${RUBY_ARCHHDR_DIR}      CACHE PATH "The Ruby arch header dir (2.0+)" FORCE)
+   set(RUBY_POSSIBLE_LIB_DIR ${RUBY_POSSIBLE_LIB_DIR} CACHE PATH "The Ruby lib dir" FORCE)
+   set(RUBY_RUBY_LIB_DIR     ${RUBY_RUBY_LIB_DIR}     CACHE PATH "The Ruby ruby-lib dir" FORCE)
+   set(RUBY_SITEARCH_DIR     ${RUBY_SITEARCH_DIR}     CACHE PATH "The Ruby site arch dir" FORCE)
+   set(RUBY_SITELIB_DIR      ${RUBY_SITELIB_DIR}      CACHE PATH "The Ruby site lib dir" FORCE)
+   set(RUBY_HAS_VENDOR_RUBY  ${RUBY_HAS_VENDOR_RUBY}  CACHE BOOL "Vendor Ruby is available" FORCE)
+   set(RUBY_VENDORARCH_DIR   ${RUBY_VENDORARCH_DIR}   CACHE PATH "The Ruby vendor arch dir" FORCE)
+   set(RUBY_VENDORLIB_DIR    ${RUBY_VENDORLIB_DIR}    CACHE PATH "The Ruby vendor lib dir" FORCE)
+
+   mark_as_advanced(
+     RUBY_ARCH_DIR
+     RUBY_ARCH
+     RUBY_HDR_DIR
+     RUBY_ARCHHDR_DIR
+     RUBY_POSSIBLE_LIB_DIR
+     RUBY_RUBY_LIB_DIR
+     RUBY_SITEARCH_DIR
+     RUBY_SITELIB_DIR
+     RUBY_HAS_VENDOR_RUBY
+     RUBY_VENDORARCH_DIR
+     RUBY_VENDORLIB_DIR
+     RUBY_VERSION_MAJOR
+     RUBY_VERSION_MINOR
+     RUBY_VERSION_PATCH
+     )
+endif()
+
+# In case RUBY_EXECUTABLE could not be executed (e.g. cross compiling)
+# try to detect which version we found. This is not too good.
+if(RUBY_EXECUTABLE AND NOT RUBY_VERSION_MAJOR)
+   # by default assume 1.8.0
+   set(RUBY_VERSION_MAJOR 1)
+   set(RUBY_VERSION_MINOR 8)
+   set(RUBY_VERSION_PATCH 0)
+   # check whether we found 1.9.x
+   if(${RUBY_EXECUTABLE} MATCHES "ruby1.?9")
+      set(RUBY_VERSION_MAJOR 1)
+      set(RUBY_VERSION_MINOR 9)
+   endif()
+   # check whether we found 2.0.x
+   if(${RUBY_EXECUTABLE} MATCHES "ruby2.?0")
+      set(RUBY_VERSION_MAJOR 2)
+      set(RUBY_VERSION_MINOR 0)
+   endif()
+   # check whether we found 2.1.x
+   if(${RUBY_EXECUTABLE} MATCHES "ruby2.?1")
+      set(RUBY_VERSION_MAJOR 2)
+      set(RUBY_VERSION_MINOR 1)
+   endif()
+endif()
+
+if(RUBY_VERSION_MAJOR)
+   set(RUBY_VERSION "${RUBY_VERSION_MAJOR}.${RUBY_VERSION_MINOR}.${RUBY_VERSION_PATCH}")
+   set(_RUBY_VERSION_SHORT "${RUBY_VERSION_MAJOR}.${RUBY_VERSION_MINOR}")
+   set(_RUBY_VERSION_SHORT_NODOT "${RUBY_VERSION_MAJOR}${RUBY_VERSION_MINOR}")
+   set(_RUBY_NODOT_VERSION "${RUBY_VERSION_MAJOR}${RUBY_VERSION_MINOR}${RUBY_VERSION_PATCH}")
+endif()
+
+find_path(RUBY_INCLUDE_DIR
+   NAMES ruby.h
+   HINTS
+   ${RUBY_HDR_DIR}
+   ${RUBY_ARCH_DIR}
+   /usr/lib/ruby/${_RUBY_VERSION_SHORT}/i586-linux-gnu/ )
+
+set(RUBY_INCLUDE_DIRS ${RUBY_INCLUDE_DIR} )
+
+# if ruby > 1.8 is required or if ruby > 1.8 was found, search for the config.h dir
+if( "${Ruby_FIND_VERSION_SHORT_NODOT}" GREATER 18  OR  "${_RUBY_VERSION_SHORT_NODOT}" GREATER 18  OR  RUBY_HDR_DIR)
+   find_path(RUBY_CONFIG_INCLUDE_DIR
+     NAMES ruby/config.h  config.h
+     HINTS
+     ${RUBY_HDR_DIR}/${RUBY_ARCH}
+     ${RUBY_ARCH_DIR}
+     ${RUBY_ARCHHDR_DIR}
+     )
+
+   set(RUBY_INCLUDE_DIRS ${RUBY_INCLUDE_DIRS} ${RUBY_CONFIG_INCLUDE_DIR} )
+endif()
+
+
+# Determine the list of possible names for the ruby library
+set(_RUBY_POSSIBLE_LIB_NAMES ruby ruby-static ruby${_RUBY_VERSION_SHORT} ruby${_RUBY_VERSION_SHORT_NODOT} ruby-${_RUBY_VERSION_SHORT} ruby-${RUBY_VERSION})
+
+if(WIN32)
+   set( _RUBY_MSVC_RUNTIME "" )
+   if( MSVC60 )
+     set( _RUBY_MSVC_RUNTIME "60" )
+   endif()
+   if( MSVC70 )
+     set( _RUBY_MSVC_RUNTIME "70" )
+   endif()
+   if( MSVC71 )
+     set( _RUBY_MSVC_RUNTIME "71" )
+   endif()
+   if( MSVC80 )
+     set( _RUBY_MSVC_RUNTIME "80" )
+   endif()
+   if( MSVC90 )
+     set( _RUBY_MSVC_RUNTIME "90" )
+   endif()
+
+   set(_RUBY_ARCH_PREFIX "")
+   if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+     set(_RUBY_ARCH_PREFIX "x64-")
+   endif()
+
+   list(APPEND _RUBY_POSSIBLE_LIB_NAMES
+               "${_RUBY_ARCH_PREFIX}msvcr${_RUBY_MSVC_RUNTIME}-ruby${_RUBY_NODOT_VERSION}"
+               "${_RUBY_ARCH_PREFIX}msvcr${_RUBY_MSVC_RUNTIME}-ruby${_RUBY_NODOT_VERSION}-static"
+               "${_RUBY_ARCH_PREFIX}msvcrt-ruby${_RUBY_NODOT_VERSION}"
+               "${_RUBY_ARCH_PREFIX}msvcrt-ruby${_RUBY_NODOT_VERSION}-static" )
+endif()
+
+find_library(RUBY_LIBRARY NAMES ${_RUBY_POSSIBLE_LIB_NAMES} HINTS ${RUBY_POSSIBLE_LIB_DIR} )
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+set(_RUBY_REQUIRED_VARS RUBY_EXECUTABLE RUBY_INCLUDE_DIR RUBY_LIBRARY)
+if(_RUBY_VERSION_SHORT_NODOT GREATER 18)
+   list(APPEND _RUBY_REQUIRED_VARS RUBY_CONFIG_INCLUDE_DIR)
+endif()
+
+if(_RUBY_DEBUG_OUTPUT)
+   message(STATUS "--------FindRuby.cmake debug------------")
+   message(STATUS "_RUBY_POSSIBLE_EXECUTABLE_NAMES: ${_RUBY_POSSIBLE_EXECUTABLE_NAMES}")
+   message(STATUS "_RUBY_POSSIBLE_LIB_NAMES: ${_RUBY_POSSIBLE_LIB_NAMES}")
+   message(STATUS "RUBY_ARCH_DIR: ${RUBY_ARCH_DIR}")
+   message(STATUS "RUBY_HDR_DIR: ${RUBY_HDR_DIR}")
+   message(STATUS "RUBY_POSSIBLE_LIB_DIR: ${RUBY_POSSIBLE_LIB_DIR}")
+   message(STATUS "Found RUBY_VERSION: \"${RUBY_VERSION}\" , short: \"${_RUBY_VERSION_SHORT}\", nodot: \"${_RUBY_VERSION_SHORT_NODOT}\"")
+   message(STATUS "_RUBY_REQUIRED_VARS: ${_RUBY_REQUIRED_VARS}")
+   message(STATUS "RUBY_EXECUTABLE: ${RUBY_EXECUTABLE}")
+   message(STATUS "RUBY_LIBRARY: ${RUBY_LIBRARY}")
+   message(STATUS "RUBY_INCLUDE_DIR: ${RUBY_INCLUDE_DIR}")
+   message(STATUS "RUBY_CONFIG_INCLUDE_DIR: ${RUBY_CONFIG_INCLUDE_DIR}")
+   message(STATUS "--------------------")
+endif()
+
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(Ruby  REQUIRED_VARS  ${_RUBY_REQUIRED_VARS}
+                                        VERSION_VAR RUBY_VERSION )
+
+mark_as_advanced(
+  RUBY_EXECUTABLE
+  RUBY_LIBRARY
+  RUBY_INCLUDE_DIR
+  RUBY_CONFIG_INCLUDE_DIR
+  )
+
+# Set some variables for compatibility with previous version of this file
+set(RUBY_POSSIBLE_LIB_PATH ${RUBY_POSSIBLE_LIB_DIR})
+set(RUBY_RUBY_LIB_PATH ${RUBY_RUBY_LIB_DIR})
+set(RUBY_INCLUDE_PATH ${RUBY_INCLUDE_DIRS})
diff --git a/share/cmake-3.2/Modules/FindSDL.cmake b/share/cmake-3.6/Modules/FindSDL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindSDL.cmake
rename to share/cmake-3.6/Modules/FindSDL.cmake
diff --git a/share/cmake-3.6/Modules/FindSDL_image.cmake b/share/cmake-3.6/Modules/FindSDL_image.cmake
new file mode 100644
index 0000000..e7517c5
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindSDL_image.cmake
@@ -0,0 +1,111 @@
+#.rst:
+# FindSDL_image
+# -------------
+#
+# Locate SDL_image library
+#
+# This module defines:
+#
+# ::
+#
+#   SDL_IMAGE_LIBRARIES, the name of the library to link against
+#   SDL_IMAGE_INCLUDE_DIRS, where to find the headers
+#   SDL_IMAGE_FOUND, if false, do not try to link against
+#   SDL_IMAGE_VERSION_STRING - human-readable string containing the
+#                              version of SDL_image
+#
+#
+#
+# For backward compatibility the following variables are also set:
+#
+# ::
+#
+#   SDLIMAGE_LIBRARY (same value as SDL_IMAGE_LIBRARIES)
+#   SDLIMAGE_INCLUDE_DIR (same value as SDL_IMAGE_INCLUDE_DIRS)
+#   SDLIMAGE_FOUND (same value as SDL_IMAGE_FOUND)
+#
+#
+#
+# $SDLDIR is an environment variable that would correspond to the
+# ./configure --prefix=$SDLDIR used in building SDL.
+#
+# Created by Eric Wing.  This was influenced by the FindSDL.cmake
+# module, but with modifications to recognize OS X frameworks and
+# additional Unix paths (FreeBSD, etc).
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+# Copyright 2012 Benjamin Eikel
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(NOT SDL_IMAGE_INCLUDE_DIR AND SDLIMAGE_INCLUDE_DIR)
+  set(SDL_IMAGE_INCLUDE_DIR ${SDLIMAGE_INCLUDE_DIR} CACHE PATH "directory cache
+entry initialized from old variable name")
+endif()
+find_path(SDL_IMAGE_INCLUDE_DIR SDL_image.h
+  HINTS
+    ENV SDLIMAGEDIR
+    ENV SDLDIR
+  PATH_SUFFIXES SDL
+                # path suffixes to search inside ENV{SDLDIR}
+                include/SDL include/SDL12 include/SDL11 include
+)
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(VC_LIB_PATH_SUFFIX lib/x64)
+else()
+  set(VC_LIB_PATH_SUFFIX lib/x86)
+endif()
+
+if(NOT SDL_IMAGE_LIBRARY AND SDLIMAGE_LIBRARY)
+  set(SDL_IMAGE_LIBRARY ${SDLIMAGE_LIBRARY} CACHE FILEPATH "file cache entry
+initialized from old variable name")
+endif()
+find_library(SDL_IMAGE_LIBRARY
+  NAMES SDL_image
+  HINTS
+    ENV SDLIMAGEDIR
+    ENV SDLDIR
+  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
+)
+
+if(SDL_IMAGE_INCLUDE_DIR AND EXISTS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h")
+  file(STRINGS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h" SDL_IMAGE_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_IMAGE_MAJOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h" SDL_IMAGE_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_IMAGE_MINOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_IMAGE_INCLUDE_DIR}/SDL_image.h" SDL_IMAGE_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_IMAGE_PATCHLEVEL[ \t]+[0-9]+$")
+  string(REGEX REPLACE "^#define[ \t]+SDL_IMAGE_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_IMAGE_VERSION_MAJOR "${SDL_IMAGE_VERSION_MAJOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_IMAGE_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_IMAGE_VERSION_MINOR "${SDL_IMAGE_VERSION_MINOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_IMAGE_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_IMAGE_VERSION_PATCH "${SDL_IMAGE_VERSION_PATCH_LINE}")
+  set(SDL_IMAGE_VERSION_STRING ${SDL_IMAGE_VERSION_MAJOR}.${SDL_IMAGE_VERSION_MINOR}.${SDL_IMAGE_VERSION_PATCH})
+  unset(SDL_IMAGE_VERSION_MAJOR_LINE)
+  unset(SDL_IMAGE_VERSION_MINOR_LINE)
+  unset(SDL_IMAGE_VERSION_PATCH_LINE)
+  unset(SDL_IMAGE_VERSION_MAJOR)
+  unset(SDL_IMAGE_VERSION_MINOR)
+  unset(SDL_IMAGE_VERSION_PATCH)
+endif()
+
+set(SDL_IMAGE_LIBRARIES ${SDL_IMAGE_LIBRARY})
+set(SDL_IMAGE_INCLUDE_DIRS ${SDL_IMAGE_INCLUDE_DIR})
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_image
+                                  REQUIRED_VARS SDL_IMAGE_LIBRARIES SDL_IMAGE_INCLUDE_DIRS
+                                  VERSION_VAR SDL_IMAGE_VERSION_STRING)
+
+# for backward compatibility
+set(SDLIMAGE_LIBRARY ${SDL_IMAGE_LIBRARIES})
+set(SDLIMAGE_INCLUDE_DIR ${SDL_IMAGE_INCLUDE_DIRS})
+set(SDLIMAGE_FOUND ${SDL_IMAGE_FOUND})
+
+mark_as_advanced(SDL_IMAGE_LIBRARY SDL_IMAGE_INCLUDE_DIR)
diff --git a/share/cmake-3.6/Modules/FindSDL_mixer.cmake b/share/cmake-3.6/Modules/FindSDL_mixer.cmake
new file mode 100644
index 0000000..72ec654
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindSDL_mixer.cmake
@@ -0,0 +1,111 @@
+#.rst:
+# FindSDL_mixer
+# -------------
+#
+# Locate SDL_mixer library
+#
+# This module defines:
+#
+# ::
+#
+#   SDL_MIXER_LIBRARIES, the name of the library to link against
+#   SDL_MIXER_INCLUDE_DIRS, where to find the headers
+#   SDL_MIXER_FOUND, if false, do not try to link against
+#   SDL_MIXER_VERSION_STRING - human-readable string containing the
+#                              version of SDL_mixer
+#
+#
+#
+# For backward compatibility the following variables are also set:
+#
+# ::
+#
+#   SDLMIXER_LIBRARY (same value as SDL_MIXER_LIBRARIES)
+#   SDLMIXER_INCLUDE_DIR (same value as SDL_MIXER_INCLUDE_DIRS)
+#   SDLMIXER_FOUND (same value as SDL_MIXER_FOUND)
+#
+#
+#
+# $SDLDIR is an environment variable that would correspond to the
+# ./configure --prefix=$SDLDIR used in building SDL.
+#
+# Created by Eric Wing.  This was influenced by the FindSDL.cmake
+# module, but with modifications to recognize OS X frameworks and
+# additional Unix paths (FreeBSD, etc).
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+# Copyright 2012 Benjamin Eikel
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(NOT SDL_MIXER_INCLUDE_DIR AND SDLMIXER_INCLUDE_DIR)
+  set(SDL_MIXER_INCLUDE_DIR ${SDLMIXER_INCLUDE_DIR} CACHE PATH "directory cache
+entry initialized from old variable name")
+endif()
+find_path(SDL_MIXER_INCLUDE_DIR SDL_mixer.h
+  HINTS
+    ENV SDLMIXERDIR
+    ENV SDLDIR
+  PATH_SUFFIXES SDL
+                # path suffixes to search inside ENV{SDLDIR}
+                include/SDL include/SDL12 include/SDL11 include
+)
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(VC_LIB_PATH_SUFFIX lib/x64)
+else()
+  set(VC_LIB_PATH_SUFFIX lib/x86)
+endif()
+
+if(NOT SDL_MIXER_LIBRARY AND SDLMIXER_LIBRARY)
+  set(SDL_MIXER_LIBRARY ${SDLMIXER_LIBRARY} CACHE FILEPATH "file cache entry
+initialized from old variable name")
+endif()
+find_library(SDL_MIXER_LIBRARY
+  NAMES SDL_mixer
+  HINTS
+    ENV SDLMIXERDIR
+    ENV SDLDIR
+  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
+)
+
+if(SDL_MIXER_INCLUDE_DIR AND EXISTS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h")
+  file(STRINGS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h" SDL_MIXER_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_MIXER_MAJOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h" SDL_MIXER_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_MIXER_MINOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_MIXER_INCLUDE_DIR}/SDL_mixer.h" SDL_MIXER_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_MIXER_PATCHLEVEL[ \t]+[0-9]+$")
+  string(REGEX REPLACE "^#define[ \t]+SDL_MIXER_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_MIXER_VERSION_MAJOR "${SDL_MIXER_VERSION_MAJOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_MIXER_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_MIXER_VERSION_MINOR "${SDL_MIXER_VERSION_MINOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_MIXER_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_MIXER_VERSION_PATCH "${SDL_MIXER_VERSION_PATCH_LINE}")
+  set(SDL_MIXER_VERSION_STRING ${SDL_MIXER_VERSION_MAJOR}.${SDL_MIXER_VERSION_MINOR}.${SDL_MIXER_VERSION_PATCH})
+  unset(SDL_MIXER_VERSION_MAJOR_LINE)
+  unset(SDL_MIXER_VERSION_MINOR_LINE)
+  unset(SDL_MIXER_VERSION_PATCH_LINE)
+  unset(SDL_MIXER_VERSION_MAJOR)
+  unset(SDL_MIXER_VERSION_MINOR)
+  unset(SDL_MIXER_VERSION_PATCH)
+endif()
+
+set(SDL_MIXER_LIBRARIES ${SDL_MIXER_LIBRARY})
+set(SDL_MIXER_INCLUDE_DIRS ${SDL_MIXER_INCLUDE_DIR})
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_mixer
+                                  REQUIRED_VARS SDL_MIXER_LIBRARIES SDL_MIXER_INCLUDE_DIRS
+                                  VERSION_VAR SDL_MIXER_VERSION_STRING)
+
+# for backward compatibility
+set(SDLMIXER_LIBRARY ${SDL_MIXER_LIBRARIES})
+set(SDLMIXER_INCLUDE_DIR ${SDL_MIXER_INCLUDE_DIRS})
+set(SDLMIXER_FOUND ${SDL_MIXER_FOUND})
+
+mark_as_advanced(SDL_MIXER_LIBRARY SDL_MIXER_INCLUDE_DIR)
diff --git a/share/cmake-3.6/Modules/FindSDL_net.cmake b/share/cmake-3.6/Modules/FindSDL_net.cmake
new file mode 100644
index 0000000..11c250c
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindSDL_net.cmake
@@ -0,0 +1,110 @@
+#.rst:
+# FindSDL_net
+# -----------
+#
+# Locate SDL_net library
+#
+# This module defines:
+#
+# ::
+#
+#   SDL_NET_LIBRARIES, the name of the library to link against
+#   SDL_NET_INCLUDE_DIRS, where to find the headers
+#   SDL_NET_FOUND, if false, do not try to link against
+#   SDL_NET_VERSION_STRING - human-readable string containing the version of SDL_net
+#
+#
+#
+# For backward compatibility the following variables are also set:
+#
+# ::
+#
+#   SDLNET_LIBRARY (same value as SDL_NET_LIBRARIES)
+#   SDLNET_INCLUDE_DIR (same value as SDL_NET_INCLUDE_DIRS)
+#   SDLNET_FOUND (same value as SDL_NET_FOUND)
+#
+#
+#
+# $SDLDIR is an environment variable that would correspond to the
+# ./configure --prefix=$SDLDIR used in building SDL.
+#
+# Created by Eric Wing.  This was influenced by the FindSDL.cmake
+# module, but with modifications to recognize OS X frameworks and
+# additional Unix paths (FreeBSD, etc).
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+# Copyright 2012 Benjamin Eikel
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(NOT SDL_NET_INCLUDE_DIR AND SDLNET_INCLUDE_DIR)
+  set(SDL_NET_INCLUDE_DIR ${SDLNET_INCLUDE_DIR} CACHE PATH "directory cache
+entry initialized from old variable name")
+endif()
+find_path(SDL_NET_INCLUDE_DIR SDL_net.h
+  HINTS
+    ENV SDLNETDIR
+    ENV SDLDIR
+  PATH_SUFFIXES SDL
+                # path suffixes to search inside ENV{SDLDIR}
+                include/SDL include/SDL12 include/SDL11 include
+)
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(VC_LIB_PATH_SUFFIX lib/x64)
+else()
+  set(VC_LIB_PATH_SUFFIX lib/x86)
+endif()
+
+if(NOT SDL_NET_LIBRARY AND SDLNET_LIBRARY)
+  set(SDL_NET_LIBRARY ${SDLNET_LIBRARY} CACHE FILEPATH "file cache entry
+initialized from old variable name")
+endif()
+find_library(SDL_NET_LIBRARY
+  NAMES SDL_net
+  HINTS
+    ENV SDLNETDIR
+    ENV SDLDIR
+  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
+)
+
+if(SDL_NET_INCLUDE_DIR AND EXISTS "${SDL_NET_INCLUDE_DIR}/SDL_net.h")
+  file(STRINGS "${SDL_NET_INCLUDE_DIR}/SDL_net.h" SDL_NET_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_NET_MAJOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_NET_INCLUDE_DIR}/SDL_net.h" SDL_NET_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_NET_MINOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_NET_INCLUDE_DIR}/SDL_net.h" SDL_NET_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_NET_PATCHLEVEL[ \t]+[0-9]+$")
+  string(REGEX REPLACE "^#define[ \t]+SDL_NET_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_NET_VERSION_MAJOR "${SDL_NET_VERSION_MAJOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_NET_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_NET_VERSION_MINOR "${SDL_NET_VERSION_MINOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_NET_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_NET_VERSION_PATCH "${SDL_NET_VERSION_PATCH_LINE}")
+  set(SDL_NET_VERSION_STRING ${SDL_NET_VERSION_MAJOR}.${SDL_NET_VERSION_MINOR}.${SDL_NET_VERSION_PATCH})
+  unset(SDL_NET_VERSION_MAJOR_LINE)
+  unset(SDL_NET_VERSION_MINOR_LINE)
+  unset(SDL_NET_VERSION_PATCH_LINE)
+  unset(SDL_NET_VERSION_MAJOR)
+  unset(SDL_NET_VERSION_MINOR)
+  unset(SDL_NET_VERSION_PATCH)
+endif()
+
+set(SDL_NET_LIBRARIES ${SDL_NET_LIBRARY})
+set(SDL_NET_INCLUDE_DIRS ${SDL_NET_INCLUDE_DIR})
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_net
+                                  REQUIRED_VARS SDL_NET_LIBRARIES SDL_NET_INCLUDE_DIRS
+                                  VERSION_VAR SDL_NET_VERSION_STRING)
+
+# for backward compatibility
+set(SDLNET_LIBRARY ${SDL_NET_LIBRARIES})
+set(SDLNET_INCLUDE_DIR ${SDL_NET_INCLUDE_DIRS})
+set(SDLNET_FOUND ${SDL_NET_FOUND})
+
+mark_as_advanced(SDL_NET_LIBRARY SDL_NET_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindSDL_sound.cmake b/share/cmake-3.6/Modules/FindSDL_sound.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindSDL_sound.cmake
rename to share/cmake-3.6/Modules/FindSDL_sound.cmake
diff --git a/share/cmake-3.6/Modules/FindSDL_ttf.cmake b/share/cmake-3.6/Modules/FindSDL_ttf.cmake
new file mode 100644
index 0000000..38f6e1d
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindSDL_ttf.cmake
@@ -0,0 +1,110 @@
+#.rst:
+# FindSDL_ttf
+# -----------
+#
+# Locate SDL_ttf library
+#
+# This module defines:
+#
+# ::
+#
+#   SDL_TTF_LIBRARIES, the name of the library to link against
+#   SDL_TTF_INCLUDE_DIRS, where to find the headers
+#   SDL_TTF_FOUND, if false, do not try to link against
+#   SDL_TTF_VERSION_STRING - human-readable string containing the version of SDL_ttf
+#
+#
+#
+# For backward compatibility the following variables are also set:
+#
+# ::
+#
+#   SDLTTF_LIBRARY (same value as SDL_TTF_LIBRARIES)
+#   SDLTTF_INCLUDE_DIR (same value as SDL_TTF_INCLUDE_DIRS)
+#   SDLTTF_FOUND (same value as SDL_TTF_FOUND)
+#
+#
+#
+# $SDLDIR is an environment variable that would correspond to the
+# ./configure --prefix=$SDLDIR used in building SDL.
+#
+# Created by Eric Wing.  This was influenced by the FindSDL.cmake
+# module, but with modifications to recognize OS X frameworks and
+# additional Unix paths (FreeBSD, etc).
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+# Copyright 2012 Benjamin Eikel
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(NOT SDL_TTF_INCLUDE_DIR AND SDLTTF_INCLUDE_DIR)
+  set(SDL_TTF_INCLUDE_DIR ${SDLTTF_INCLUDE_DIR} CACHE PATH "directory cache
+entry initialized from old variable name")
+endif()
+find_path(SDL_TTF_INCLUDE_DIR SDL_ttf.h
+  HINTS
+    ENV SDLTTFDIR
+    ENV SDLDIR
+  PATH_SUFFIXES SDL
+                # path suffixes to search inside ENV{SDLDIR}
+                include/SDL include/SDL12 include/SDL11 include
+)
+
+if(CMAKE_SIZEOF_VOID_P EQUAL 8)
+  set(VC_LIB_PATH_SUFFIX lib/x64)
+else()
+  set(VC_LIB_PATH_SUFFIX lib/x86)
+endif()
+
+if(NOT SDL_TTF_LIBRARY AND SDLTTF_LIBRARY)
+  set(SDL_TTF_LIBRARY ${SDLTTF_LIBRARY} CACHE FILEPATH "file cache entry
+initialized from old variable name")
+endif()
+find_library(SDL_TTF_LIBRARY
+  NAMES SDL_ttf
+  HINTS
+    ENV SDLTTFDIR
+    ENV SDLDIR
+  PATH_SUFFIXES lib ${VC_LIB_PATH_SUFFIX}
+)
+
+if(SDL_TTF_INCLUDE_DIR AND EXISTS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h")
+  file(STRINGS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h" SDL_TTF_VERSION_MAJOR_LINE REGEX "^#define[ \t]+SDL_TTF_MAJOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h" SDL_TTF_VERSION_MINOR_LINE REGEX "^#define[ \t]+SDL_TTF_MINOR_VERSION[ \t]+[0-9]+$")
+  file(STRINGS "${SDL_TTF_INCLUDE_DIR}/SDL_ttf.h" SDL_TTF_VERSION_PATCH_LINE REGEX "^#define[ \t]+SDL_TTF_PATCHLEVEL[ \t]+[0-9]+$")
+  string(REGEX REPLACE "^#define[ \t]+SDL_TTF_MAJOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_TTF_VERSION_MAJOR "${SDL_TTF_VERSION_MAJOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_TTF_MINOR_VERSION[ \t]+([0-9]+)$" "\\1" SDL_TTF_VERSION_MINOR "${SDL_TTF_VERSION_MINOR_LINE}")
+  string(REGEX REPLACE "^#define[ \t]+SDL_TTF_PATCHLEVEL[ \t]+([0-9]+)$" "\\1" SDL_TTF_VERSION_PATCH "${SDL_TTF_VERSION_PATCH_LINE}")
+  set(SDL_TTF_VERSION_STRING ${SDL_TTF_VERSION_MAJOR}.${SDL_TTF_VERSION_MINOR}.${SDL_TTF_VERSION_PATCH})
+  unset(SDL_TTF_VERSION_MAJOR_LINE)
+  unset(SDL_TTF_VERSION_MINOR_LINE)
+  unset(SDL_TTF_VERSION_PATCH_LINE)
+  unset(SDL_TTF_VERSION_MAJOR)
+  unset(SDL_TTF_VERSION_MINOR)
+  unset(SDL_TTF_VERSION_PATCH)
+endif()
+
+set(SDL_TTF_LIBRARIES ${SDL_TTF_LIBRARY})
+set(SDL_TTF_INCLUDE_DIRS ${SDL_TTF_INCLUDE_DIR})
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_ttf
+                                  REQUIRED_VARS SDL_TTF_LIBRARIES SDL_TTF_INCLUDE_DIRS
+                                  VERSION_VAR SDL_TTF_VERSION_STRING)
+
+# for backward compatibility
+set(SDLTTF_LIBRARY ${SDL_TTF_LIBRARIES})
+set(SDLTTF_INCLUDE_DIR ${SDL_TTF_INCLUDE_DIRS})
+set(SDLTTF_FOUND ${SDL_TTF_FOUND})
+
+mark_as_advanced(SDL_TTF_LIBRARY SDL_TTF_INCLUDE_DIR)
diff --git a/share/cmake-3.2/Modules/FindSWIG.cmake b/share/cmake-3.6/Modules/FindSWIG.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindSWIG.cmake
rename to share/cmake-3.6/Modules/FindSWIG.cmake
diff --git a/share/cmake-3.2/Modules/FindSelfPackers.cmake b/share/cmake-3.6/Modules/FindSelfPackers.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindSelfPackers.cmake
rename to share/cmake-3.6/Modules/FindSelfPackers.cmake
diff --git a/share/cmake-3.2/Modules/FindSquish.cmake b/share/cmake-3.6/Modules/FindSquish.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindSquish.cmake
rename to share/cmake-3.6/Modules/FindSquish.cmake
diff --git a/share/cmake-3.6/Modules/FindSubversion.cmake b/share/cmake-3.6/Modules/FindSubversion.cmake
new file mode 100644
index 0000000..804f44c
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindSubversion.cmake
@@ -0,0 +1,158 @@
+#.rst:
+# FindSubversion
+# --------------
+#
+# Extract information from a subversion working copy
+#
+# The module defines the following variables:
+#
+# ::
+#
+#   Subversion_SVN_EXECUTABLE - path to svn command line client
+#   Subversion_VERSION_SVN - version of svn command line client
+#   Subversion_FOUND - true if the command line client was found
+#   SUBVERSION_FOUND - same as Subversion_FOUND, set for compatibility reasons
+#
+#
+#
+# The minimum required version of Subversion can be specified using the
+# standard syntax, e.g.  find_package(Subversion 1.4)
+#
+# If the command line client executable is found two macros are defined:
+#
+# ::
+#
+#   Subversion_WC_INFO(<dir> <var-prefix>)
+#   Subversion_WC_LOG(<dir> <var-prefix>)
+#
+# Subversion_WC_INFO extracts information of a subversion working copy
+# at a given location.  This macro defines the following variables:
+#
+# ::
+#
+#   <var-prefix>_WC_URL - url of the repository (at <dir>)
+#   <var-prefix>_WC_ROOT - root url of the repository
+#   <var-prefix>_WC_REVISION - current revision
+#   <var-prefix>_WC_LAST_CHANGED_AUTHOR - author of last commit
+#   <var-prefix>_WC_LAST_CHANGED_DATE - date of last commit
+#   <var-prefix>_WC_LAST_CHANGED_REV - revision of last commit
+#   <var-prefix>_WC_INFO - output of command `svn info <dir>'
+#
+# Subversion_WC_LOG retrieves the log message of the base revision of a
+# subversion working copy at a given location.  This macro defines the
+# variable:
+#
+# ::
+#
+#   <var-prefix>_LAST_CHANGED_LOG - last log of base revision
+#
+# Example usage:
+#
+# ::
+#
+#   find_package(Subversion)
+#   if(SUBVERSION_FOUND)
+#     Subversion_WC_INFO(${PROJECT_SOURCE_DIR} Project)
+#     message("Current revision is ${Project_WC_REVISION}")
+#     Subversion_WC_LOG(${PROJECT_SOURCE_DIR} Project)
+#     message("Last changed log is ${Project_LAST_CHANGED_LOG}")
+#   endif()
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+# Copyright 2006 Tristan Carel
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_program(Subversion_SVN_EXECUTABLE svn
+  PATHS
+    [HKEY_LOCAL_MACHINE\\Software\\TortoiseSVN;Directory]/bin
+  DOC "subversion command line client")
+mark_as_advanced(Subversion_SVN_EXECUTABLE)
+
+if(Subversion_SVN_EXECUTABLE)
+  # the subversion commands should be executed with the C locale, otherwise
+  # the message (which are parsed) may be translated, Alex
+  set(_Subversion_SAVED_LC_ALL "$ENV{LC_ALL}")
+  set(ENV{LC_ALL} C)
+
+  execute_process(COMMAND ${Subversion_SVN_EXECUTABLE} --version
+    OUTPUT_VARIABLE Subversion_VERSION_SVN
+    OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+  # restore the previous LC_ALL
+  set(ENV{LC_ALL} ${_Subversion_SAVED_LC_ALL})
+
+  string(REGEX REPLACE "^(.*\n)?svn, version ([.0-9]+).*"
+    "\\2" Subversion_VERSION_SVN "${Subversion_VERSION_SVN}")
+
+  macro(Subversion_WC_INFO dir prefix)
+    # the subversion commands should be executed with the C locale, otherwise
+    # the message (which are parsed) may be translated, Alex
+    set(_Subversion_SAVED_LC_ALL "$ENV{LC_ALL}")
+    set(ENV{LC_ALL} C)
+
+    execute_process(COMMAND ${Subversion_SVN_EXECUTABLE} info ${dir}
+      OUTPUT_VARIABLE ${prefix}_WC_INFO
+      ERROR_VARIABLE Subversion_svn_info_error
+      RESULT_VARIABLE Subversion_svn_info_result
+      OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+    if(NOT ${Subversion_svn_info_result} EQUAL 0)
+      message(SEND_ERROR "Command \"${Subversion_SVN_EXECUTABLE} info ${dir}\" failed with output:\n${Subversion_svn_info_error}")
+    else()
+
+      string(REGEX REPLACE "^(.*\n)?URL: ([^\n]+).*"
+        "\\2" ${prefix}_WC_URL "${${prefix}_WC_INFO}")
+      string(REGEX REPLACE "^(.*\n)?Repository Root: ([^\n]+).*"
+        "\\2" ${prefix}_WC_ROOT "${${prefix}_WC_INFO}")
+      string(REGEX REPLACE "^(.*\n)?Revision: ([^\n]+).*"
+        "\\2" ${prefix}_WC_REVISION "${${prefix}_WC_INFO}")
+      string(REGEX REPLACE "^(.*\n)?Last Changed Author: ([^\n]+).*"
+        "\\2" ${prefix}_WC_LAST_CHANGED_AUTHOR "${${prefix}_WC_INFO}")
+      string(REGEX REPLACE "^(.*\n)?Last Changed Rev: ([^\n]+).*"
+        "\\2" ${prefix}_WC_LAST_CHANGED_REV "${${prefix}_WC_INFO}")
+      string(REGEX REPLACE "^(.*\n)?Last Changed Date: ([^\n]+).*"
+        "\\2" ${prefix}_WC_LAST_CHANGED_DATE "${${prefix}_WC_INFO}")
+
+    endif()
+
+    # restore the previous LC_ALL
+    set(ENV{LC_ALL} ${_Subversion_SAVED_LC_ALL})
+
+  endmacro()
+
+  macro(Subversion_WC_LOG dir prefix)
+    # This macro can block if the certificate is not signed:
+    # svn ask you to accept the certificate and wait for your answer
+    # This macro requires a svn server network access (Internet most of the time)
+    # and can also be slow since it access the svn server
+    execute_process(COMMAND
+      ${Subversion_SVN_EXECUTABLE} --non-interactive log -r BASE ${dir}
+      OUTPUT_VARIABLE ${prefix}_LAST_CHANGED_LOG
+      ERROR_VARIABLE Subversion_svn_log_error
+      RESULT_VARIABLE Subversion_svn_log_result
+      OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+    if(NOT ${Subversion_svn_log_result} EQUAL 0)
+      message(SEND_ERROR "Command \"${Subversion_SVN_EXECUTABLE} log -r BASE ${dir}\" failed with output:\n${Subversion_svn_log_error}")
+    endif()
+  endmacro()
+
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(Subversion REQUIRED_VARS Subversion_SVN_EXECUTABLE
+                                             VERSION_VAR Subversion_VERSION_SVN )
+
+# for compatibility
+set(Subversion_FOUND ${SUBVERSION_FOUND})
+set(Subversion_SVN_FOUND ${SUBVERSION_FOUND})
diff --git a/share/cmake-3.2/Modules/FindTCL.cmake b/share/cmake-3.6/Modules/FindTCL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindTCL.cmake
rename to share/cmake-3.6/Modules/FindTCL.cmake
diff --git a/share/cmake-3.6/Modules/FindTIFF.cmake b/share/cmake-3.6/Modules/FindTIFF.cmake
new file mode 100644
index 0000000..e600498
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindTIFF.cmake
@@ -0,0 +1,118 @@
+#.rst:
+# FindTIFF
+# --------
+#
+# Find the TIFF library (libtiff).
+#
+# Imported targets
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines the following :prop_tgt:`IMPORTED` targets:
+#
+# ``TIFF::TIFF``
+#   The TIFF library, if found.
+#
+# Result variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module will set the following variables in your project:
+#
+# ``TIFF_FOUND``
+#   true if the TIFF headers and libraries were found
+# ``TIFF_INCLUDE_DIR``
+#   the directory containing the TIFF headers
+# ``TIFF_INCLUDE_DIRS``
+#   the directory containing the TIFF headers
+# ``TIFF_LIBRARIES``
+#   TIFF libraries to be linked
+#
+# Cache variables
+# ^^^^^^^^^^^^^^^
+#
+# The following cache variables may also be set:
+#
+# ``TIFF_INCLUDE_DIR``
+#   the directory containing the TIFF headers
+# ``TIFF_LIBRARY``
+#   the path to the TIFF library
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+# Copyright 2015 University of Dundee
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_path(TIFF_INCLUDE_DIR tiff.h)
+
+set(TIFF_NAMES ${TIFF_NAMES} tiff libtiff tiff3 libtiff3)
+foreach(name ${TIFF_NAMES})
+  list(APPEND TIFF_NAMES_DEBUG "${name}d")
+endforeach()
+
+if(NOT TIFF_LIBRARY)
+  find_library(TIFF_LIBRARY_RELEASE NAMES ${TIFF_NAMES})
+  find_library(TIFF_LIBRARY_DEBUG NAMES ${TIFF_NAMES_DEBUG})
+  include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+  select_library_configurations(TIFF)
+  mark_as_advanced(TIFF_LIBRARY_RELEASE TIFF_LIBRARY_DEBUG)
+endif()
+unset(TIFF_NAMES)
+unset(TIFF_NAMES_DEBUG)
+
+if(TIFF_INCLUDE_DIR AND EXISTS "${TIFF_INCLUDE_DIR}/tiffvers.h")
+    file(STRINGS "${TIFF_INCLUDE_DIR}/tiffvers.h" tiff_version_str
+         REGEX "^#define[\t ]+TIFFLIB_VERSION_STR[\t ]+\"LIBTIFF, Version .*")
+
+    string(REGEX REPLACE "^#define[\t ]+TIFFLIB_VERSION_STR[\t ]+\"LIBTIFF, Version +([^ \\n]*).*"
+           "\\1" TIFF_VERSION_STRING "${tiff_version_str}")
+    unset(tiff_version_str)
+endif()
+
+# handle the QUIETLY and REQUIRED arguments and set TIFF_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(TIFF
+                                  REQUIRED_VARS TIFF_LIBRARY TIFF_INCLUDE_DIR
+                                  VERSION_VAR TIFF_VERSION_STRING)
+
+if(TIFF_FOUND)
+  set(TIFF_LIBRARIES ${TIFF_LIBRARY})
+  set(TIFF_INCLUDE_DIRS "${TIFF_INCLUDE_DIR}")
+
+  if(NOT TARGET TIFF::TIFF)
+    add_library(TIFF::TIFF UNKNOWN IMPORTED)
+    if(TIFF_INCLUDE_DIRS)
+      set_target_properties(TIFF::TIFF PROPERTIES
+        INTERFACE_INCLUDE_DIRECTORIES "${TIFF_INCLUDE_DIRS}")
+    endif()
+    if(EXISTS "${TIFF_LIBRARY}")
+      set_target_properties(TIFF::TIFF PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES "C"
+        IMPORTED_LOCATION "${TIFF_LIBRARY}")
+    endif()
+    if(EXISTS "${TIFF_LIBRARY_DEBUG}")
+      set_property(TARGET TIFF::TIFF APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS DEBUG)
+      set_target_properties(TIFF::TIFF PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "C"
+        IMPORTED_LOCATION_DEBUG "${TIFF_LIBRARY_DEBUG}")
+    endif()
+    if(EXISTS "${TIFF_LIBRARY_RELEASE}")
+      set_property(TARGET TIFF::TIFF APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS RELEASE)
+      set_target_properties(TIFF::TIFF PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "C"
+        IMPORTED_LOCATION_RELEASE "${TIFF_LIBRARY_RELEASE}")
+    endif()
+  endif()
+endif()
+
+mark_as_advanced(TIFF_INCLUDE_DIR TIFF_LIBRARY)
diff --git a/share/cmake-3.2/Modules/FindTclStub.cmake b/share/cmake-3.6/Modules/FindTclStub.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindTclStub.cmake
rename to share/cmake-3.6/Modules/FindTclStub.cmake
diff --git a/share/cmake-3.2/Modules/FindTclsh.cmake b/share/cmake-3.6/Modules/FindTclsh.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindTclsh.cmake
rename to share/cmake-3.6/Modules/FindTclsh.cmake
diff --git a/share/cmake-3.6/Modules/FindThreads.cmake b/share/cmake-3.6/Modules/FindThreads.cmake
new file mode 100644
index 0000000..719dace
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindThreads.cmake
@@ -0,0 +1,235 @@
+#.rst:
+# FindThreads
+# -----------
+#
+# This module determines the thread library of the system.
+#
+# The following variables are set
+#
+# ::
+#
+#   CMAKE_THREAD_LIBS_INIT     - the thread library
+#   CMAKE_USE_SPROC_INIT       - are we using sproc?
+#   CMAKE_USE_WIN32_THREADS_INIT - using WIN32 threads?
+#   CMAKE_USE_PTHREADS_INIT    - are we using pthreads
+#   CMAKE_HP_PTHREADS_INIT     - are we using hp pthreads
+#
+# The following import target is created
+#
+# ::
+#
+#   Threads::Threads
+#
+# For systems with multiple thread libraries, caller can set
+#
+# ::
+#
+#   CMAKE_THREAD_PREFER_PTHREAD
+#
+# If the use of the -pthread compiler and linker flag is preferred then the
+# caller can set
+#
+# ::
+#
+#   THREADS_PREFER_PTHREAD_FLAG
+#
+# Please note that the compiler flag can only be used with the imported
+# target. Use of both the imported target as well as this switch is highly
+# recommended for new code.
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+# Copyright 2011-2015 Rolf Eike Beer <eike@sf-mail.de>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include (CheckLibraryExists)
+include (CheckSymbolExists)
+set(Threads_FOUND FALSE)
+set(CMAKE_REQUIRED_QUIET_SAVE ${CMAKE_REQUIRED_QUIET})
+set(CMAKE_REQUIRED_QUIET ${Threads_FIND_QUIETLY})
+
+if(CMAKE_C_COMPILER_LOADED)
+  include (CheckIncludeFile)
+elseif(CMAKE_CXX_COMPILER_LOADED)
+  include (CheckIncludeFileCXX)
+else()
+  message(FATAL_ERROR "FindThreads only works if either C or CXX language is enabled")
+endif()
+
+# Do we have sproc?
+if(CMAKE_SYSTEM_NAME MATCHES IRIX AND NOT CMAKE_THREAD_PREFER_PTHREAD)
+  include (CheckIncludeFiles)
+  CHECK_INCLUDE_FILES("sys/types.h;sys/prctl.h"  CMAKE_HAVE_SPROC_H)
+endif()
+
+# Internal helper macro.
+# Do NOT even think about using it outside of this file!
+macro(_check_threads_lib LIBNAME FUNCNAME VARNAME)
+  if(NOT Threads_FOUND)
+     CHECK_LIBRARY_EXISTS(${LIBNAME} ${FUNCNAME} "" ${VARNAME})
+     if(${VARNAME})
+       set(CMAKE_THREAD_LIBS_INIT "-l${LIBNAME}")
+       set(CMAKE_HAVE_THREADS_LIBRARY 1)
+       set(Threads_FOUND TRUE)
+     endif()
+  endif ()
+endmacro()
+
+# Internal helper macro.
+# Do NOT even think about using it outside of this file!
+macro(_check_pthreads_flag)
+  if(NOT Threads_FOUND)
+    # If we did not found -lpthread, -lpthread, or -lthread, look for -pthread
+    if(NOT DEFINED THREADS_HAVE_PTHREAD_ARG)
+      message(STATUS "Check if compiler accepts -pthread")
+      if(CMAKE_C_COMPILER_LOADED)
+        set(_threads_src ${CMAKE_CURRENT_LIST_DIR}/CheckForPthreads.c)
+      elseif(CMAKE_CXX_COMPILER_LOADED)
+        set(_threads_src ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/FindThreads/CheckForPthreads.cxx)
+        configure_file(${CMAKE_CURRENT_LIST_DIR}/CheckForPthreads.c "${_threads_src}" COPYONLY)
+      endif()
+      try_run(THREADS_PTHREAD_ARG THREADS_HAVE_PTHREAD_ARG
+        ${CMAKE_BINARY_DIR}
+        ${_threads_src}
+        CMAKE_FLAGS -DLINK_LIBRARIES:STRING=-pthread
+        COMPILE_OUTPUT_VARIABLE OUTPUT)
+      unset(_threads_src)
+
+      if(THREADS_HAVE_PTHREAD_ARG)
+        if(THREADS_PTHREAD_ARG STREQUAL "2")
+          set(Threads_FOUND TRUE)
+          message(STATUS "Check if compiler accepts -pthread - yes")
+        else()
+          message(STATUS "Check if compiler accepts -pthread - no")
+          file(APPEND
+            ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+            "Determining if compiler accepts -pthread returned ${THREADS_PTHREAD_ARG} instead of 2. The compiler had the following output:\n${OUTPUT}\n\n")
+        endif()
+      else()
+        message(STATUS "Check if compiler accepts -pthread - no")
+        file(APPEND
+          ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+          "Determining if compiler accepts -pthread failed with the following output:\n${OUTPUT}\n\n")
+      endif()
+
+    endif()
+
+    if(THREADS_HAVE_PTHREAD_ARG)
+      set(Threads_FOUND TRUE)
+      set(CMAKE_THREAD_LIBS_INIT "-pthread")
+    endif()
+  endif()
+endmacro()
+
+if(CMAKE_HAVE_SPROC_H AND NOT CMAKE_THREAD_PREFER_PTHREAD)
+  # We have sproc
+  set(CMAKE_USE_SPROC_INIT 1)
+else()
+  # Do we have pthreads?
+  if(CMAKE_C_COMPILER_LOADED)
+    CHECK_INCLUDE_FILE("pthread.h" CMAKE_HAVE_PTHREAD_H)
+  else()
+    CHECK_INCLUDE_FILE_CXX("pthread.h" CMAKE_HAVE_PTHREAD_H)
+  endif()
+  if(CMAKE_HAVE_PTHREAD_H)
+
+    #
+    # We have pthread.h
+    # Let's check for the library now.
+    #
+    set(CMAKE_HAVE_THREADS_LIBRARY)
+    if(NOT THREADS_HAVE_PTHREAD_ARG)
+      # Check if pthread functions are in normal C library
+      CHECK_SYMBOL_EXISTS(pthread_create pthread.h CMAKE_HAVE_LIBC_CREATE)
+      if(CMAKE_HAVE_LIBC_CREATE)
+        set(CMAKE_THREAD_LIBS_INIT "")
+        set(CMAKE_HAVE_THREADS_LIBRARY 1)
+        set(Threads_FOUND TRUE)
+      else()
+
+        # Check for -pthread first if enabled. This is the recommended
+        # way, but not backwards compatible as one must also pass -pthread
+        # as compiler flag then.
+        if (THREADS_PREFER_PTHREAD_FLAG)
+           _check_pthreads_flag()
+        endif ()
+
+        _check_threads_lib(pthreads pthread_create CMAKE_HAVE_PTHREADS_CREATE)
+        _check_threads_lib(pthread  pthread_create CMAKE_HAVE_PTHREAD_CREATE)
+        if(CMAKE_SYSTEM_NAME MATCHES "SunOS")
+            # On sun also check for -lthread
+            _check_threads_lib(thread thr_create CMAKE_HAVE_THR_CREATE)
+        endif()
+      endif()
+    endif()
+
+    _check_pthreads_flag()
+  endif()
+endif()
+
+if(CMAKE_THREAD_LIBS_INIT OR CMAKE_HAVE_LIBC_CREATE)
+  set(CMAKE_USE_PTHREADS_INIT 1)
+  set(Threads_FOUND TRUE)
+endif()
+
+if(CMAKE_SYSTEM_NAME MATCHES "Windows")
+  set(CMAKE_USE_WIN32_THREADS_INIT 1)
+  set(Threads_FOUND TRUE)
+endif()
+
+if(CMAKE_USE_PTHREADS_INIT)
+  if(CMAKE_SYSTEM_NAME MATCHES "HP-UX")
+    # Use libcma if it exists and can be used.  It provides more
+    # symbols than the plain pthread library.  CMA threads
+    # have actually been deprecated:
+    #   http://docs.hp.com/en/B3920-90091/ch12s03.html#d0e11395
+    #   http://docs.hp.com/en/947/d8.html
+    # but we need to maintain compatibility here.
+    # The CMAKE_HP_PTHREADS setting actually indicates whether CMA threads
+    # are available.
+    CHECK_LIBRARY_EXISTS(cma pthread_attr_create "" CMAKE_HAVE_HP_CMA)
+    if(CMAKE_HAVE_HP_CMA)
+      set(CMAKE_THREAD_LIBS_INIT "-lcma")
+      set(CMAKE_HP_PTHREADS_INIT 1)
+      set(Threads_FOUND TRUE)
+    endif()
+    set(CMAKE_USE_PTHREADS_INIT 1)
+  endif()
+
+  if(CMAKE_SYSTEM MATCHES "OSF1-V")
+    set(CMAKE_USE_PTHREADS_INIT 0)
+    set(CMAKE_THREAD_LIBS_INIT )
+  endif()
+
+  if(CMAKE_SYSTEM MATCHES "CYGWIN_NT")
+    set(CMAKE_USE_PTHREADS_INIT 1)
+    set(Threads_FOUND TRUE)
+    set(CMAKE_THREAD_LIBS_INIT )
+    set(CMAKE_USE_WIN32_THREADS_INIT 0)
+  endif()
+endif()
+
+set(CMAKE_REQUIRED_QUIET ${CMAKE_REQUIRED_QUIET_SAVE})
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(Threads DEFAULT_MSG Threads_FOUND)
+
+if(THREADS_FOUND AND NOT TARGET Threads::Threads)
+  add_library(Threads::Threads INTERFACE IMPORTED)
+
+  if(THREADS_HAVE_PTHREAD_ARG)
+    set_property(TARGET Threads::Threads PROPERTY INTERFACE_COMPILE_OPTIONS "-pthread")
+  endif()
+
+  if(CMAKE_THREAD_LIBS_INIT)
+    set_property(TARGET Threads::Threads PROPERTY INTERFACE_LINK_LIBRARIES "${CMAKE_THREAD_LIBS_INIT}")
+  endif()
+endif()
diff --git a/share/cmake-3.2/Modules/FindUnixCommands.cmake b/share/cmake-3.6/Modules/FindUnixCommands.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindUnixCommands.cmake
rename to share/cmake-3.6/Modules/FindUnixCommands.cmake
diff --git a/share/cmake-3.2/Modules/FindWget.cmake b/share/cmake-3.6/Modules/FindWget.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindWget.cmake
rename to share/cmake-3.6/Modules/FindWget.cmake
diff --git a/share/cmake-3.2/Modules/FindWish.cmake b/share/cmake-3.6/Modules/FindWish.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindWish.cmake
rename to share/cmake-3.6/Modules/FindWish.cmake
diff --git a/share/cmake-3.2/Modules/FindX11.cmake b/share/cmake-3.6/Modules/FindX11.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindX11.cmake
rename to share/cmake-3.6/Modules/FindX11.cmake
diff --git a/share/cmake-3.6/Modules/FindXCTest.cmake b/share/cmake-3.6/Modules/FindXCTest.cmake
new file mode 100644
index 0000000..805a58c
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindXCTest.cmake
@@ -0,0 +1,200 @@
+#[=======================================================================[.rst:
+FindXCTest
+----------
+
+Functions to help creating and executing XCTest bundles.
+
+An XCTest bundle is a CFBundle with a special product-type
+and bundle extension. The Mac Developer Library provides more
+information in the `Testing with Xcode`_ document.
+
+.. _Testing with Xcode: http://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/testing_with_xcode/
+
+Module Functions
+^^^^^^^^^^^^^^^^
+
+.. command:: xctest_add_bundle
+
+  The ``xctest_add_bundle`` function creates a XCTest bundle named
+  <target> which will test the target <testee>. Supported target types
+  for testee are Frameworks and App Bundles::
+
+    xctest_add_bundle(
+      <target>  # Name of the XCTest bundle
+      <testee>  # Target name of the testee
+      )
+
+.. command:: xctest_add_test
+
+  The ``xctest_add_test`` function adds an XCTest bundle to the
+  project to be run by :manual:`ctest(1)`. The test will be named
+  <name> and tests <bundle>::
+
+    xctest_add_test(
+      <name>    # Test name
+      <bundle>  # Target name of XCTest bundle
+      )
+
+Module Variables
+^^^^^^^^^^^^^^^^
+
+The following variables are set by including this module:
+
+.. variable:: XCTest_FOUND
+
+  True if the XCTest Framework and executable were found.
+
+.. variable:: XCTest_EXECUTABLE
+
+  The path to the xctest command line tool used to execute XCTest bundles.
+
+.. variable:: XCTest_INCLUDE_DIRS
+
+  The directory containing the XCTest Framework headers.
+
+.. variable:: XCTest_LIBRARIES
+
+  The location of the XCTest Framework.
+
+#]=======================================================================]
+
+#=============================================================================
+# Copyright 2015 Gregor Jasny
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+find_path(XCTest_INCLUDE_DIR
+  NAMES "XCTest/XCTest.h"
+  DOC "XCTest include directory")
+mark_as_advanced(XCTest_INCLUDE_DIR)
+
+find_library(XCTest_LIBRARY
+  NAMES XCTest
+  DOC "XCTest Framework library")
+mark_as_advanced(XCTest_LIBRARY)
+
+execute_process(
+  COMMAND xcrun --find xctest
+  OUTPUT_VARIABLE _xcrun_out OUTPUT_STRIP_TRAILING_WHITESPACE
+  ERROR_VARIABLE _xcrun_err)
+if(_xcrun_out)
+  set(XCTest_EXECUTABLE "${_xcrun_out}" CACHE FILEPATH "XCTest executable")
+  mark_as_advanced(XCTest_EXECUTABLE)
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+find_package_handle_standard_args(XCTest
+  FOUND_VAR XCTest_FOUND
+  REQUIRED_VARS XCTest_LIBRARY XCTest_INCLUDE_DIR XCTest_EXECUTABLE)
+
+if(XCTest_FOUND)
+  set(XCTest_INCLUDE_DIRS "${XCTest_INCLUDE_DIR}")
+  set(XCTest_LIBRARIES "${XCTest_LIBRARY}")
+endif(XCTest_FOUND)
+
+
+function(xctest_add_bundle target testee)
+  if(NOT XCTest_FOUND)
+    message(FATAL_ERROR "XCTest is required to create a XCTest Bundle.")
+  endif(NOT XCTest_FOUND)
+
+  if(NOT CMAKE_OSX_SYSROOT)
+    message(FATAL_ERROR "Adding XCTest bundles requires CMAKE_OSX_SYSROOT to be set.")
+  endif()
+
+  add_library(${target} MODULE ${ARGN})
+
+  set_target_properties(${target} PROPERTIES
+    BUNDLE TRUE
+    XCTEST TRUE
+    XCTEST_TESTEE ${testee})
+
+  target_link_libraries(${target} PRIVATE "-framework Foundation")
+  target_link_libraries(${target} PRIVATE ${XCTest_LIBRARIES})
+  target_include_directories(${target} PRIVATE ${XCTest_INCLUDE_DIRS})
+
+  # retrieve testee target type
+  if(NOT TARGET ${testee})
+    message(FATAL_ERROR "${testee} is not a target.")
+  endif()
+  get_property(_testee_type TARGET ${testee} PROPERTY TYPE)
+  get_property(_testee_framework TARGET ${testee} PROPERTY FRAMEWORK)
+  get_property(_testee_macosx_bundle TARGET ${testee} PROPERTY MACOSX_BUNDLE)
+
+  if(_testee_type STREQUAL "SHARED_LIBRARY" AND _testee_framework)
+    # testee is a Framework
+    target_link_libraries(${target} PRIVATE ${testee})
+
+  elseif(_testee_type STREQUAL "EXECUTABLE" AND _testee_macosx_bundle)
+    # testee is an App Bundle
+    add_dependencies(${target} ${testee})
+    if(XCODE)
+      set_target_properties(${target} PROPERTIES
+        XCODE_ATTRIBUTE_BUNDLE_LOADER "$(TEST_HOST)"
+        XCODE_ATTRIBUTE_TEST_HOST "$<TARGET_FILE:${testee}>")
+      if(NOT XCODE_VERSION VERSION_LESS 7.3)
+        set_target_properties(${target} PROPERTIES
+          LIBRARY_OUTPUT_DIRECTORY "$<TARGET_FILE_DIR:${testee}>/../PlugIns")
+      endif()
+    else(XCODE)
+      target_link_libraries(${target}
+        PRIVATE -bundle_loader $<TARGET_FILE:${testee}>)
+    endif(XCODE)
+
+  else()
+    message(FATAL_ERROR "Testee ${testee} is of unsupported type.")
+  endif()
+endfunction(xctest_add_bundle)
+
+
+function(xctest_add_test name bundle)
+  if(NOT XCTest_EXECUTABLE)
+    message(FATAL_ERROR "XCTest executable is required to register a test.")
+  endif()
+
+  # check that bundle is a XCTest Bundle
+
+  if(NOT TARGET ${bundle})
+    message(FATAL_ERROR "${bundle} is not a target.")
+  endif(NOT TARGET ${bundle})
+
+  get_property(_test_type TARGET ${bundle} PROPERTY TYPE)
+  get_property(_test_bundle TARGET ${bundle} PROPERTY BUNDLE)
+  get_property(_test_xctest TARGET ${bundle} PROPERTY XCTEST)
+
+  if(NOT _test_type STREQUAL "MODULE_LIBRARY"
+       OR NOT _test_xctest OR NOT _test_bundle)
+    message(FATAL_ERROR "Test ${bundle} is not an XCTest Bundle")
+  endif()
+
+  # get and check testee properties
+
+  get_property(_testee TARGET ${bundle} PROPERTY XCTEST_TESTEE)
+  if(NOT TARGET ${_testee})
+    message(FATAL_ERROR "${_testee} is not a target.")
+  endif()
+
+  get_property(_testee_type TARGET ${_testee} PROPERTY TYPE)
+  get_property(_testee_framework TARGET ${_testee} PROPERTY FRAMEWORK)
+
+  # register test
+
+  add_test(
+    NAME ${name}
+    COMMAND ${XCTest_EXECUTABLE} $<TARGET_LINKER_FILE_DIR:${bundle}>/../..)
+
+  # point loader to testee in case rpath is disabled
+
+  if(_testee_type STREQUAL "SHARED_LIBRARY" AND _testee_framework)
+    set_property(TEST ${name} APPEND PROPERTY
+      ENVIRONMENT DYLD_FRAMEWORK_PATH=$<TARGET_LINKER_FILE_DIR:${_testee}>/..)
+  endif()
+endfunction(xctest_add_test)
diff --git a/share/cmake-3.2/Modules/FindXMLRPC.cmake b/share/cmake-3.6/Modules/FindXMLRPC.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindXMLRPC.cmake
rename to share/cmake-3.6/Modules/FindXMLRPC.cmake
diff --git a/share/cmake-3.6/Modules/FindXalanC.cmake b/share/cmake-3.6/Modules/FindXalanC.cmake
new file mode 100644
index 0000000..016b7aa
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindXalanC.cmake
@@ -0,0 +1,162 @@
+#.rst:
+# FindXalanC
+# -----------
+#
+# Find the Apache Xalan-C++ XSL transform processor headers and libraries.
+#
+# Imported targets
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines the following :prop_tgt:`IMPORTED` targets:
+#
+# ``XalanC::XalanC``
+#   The Xalan-C++ ``xalan-c`` library, if found.
+#
+# Result variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module will set the following variables in your project:
+#
+# ``XalanC_FOUND``
+#   true if the Xalan headers and libraries were found
+# ``XalanC_VERSION``
+#   Xalan release version
+# ``XalanC_INCLUDE_DIRS``
+#   the directory containing the Xalan headers; note
+#   ``XercesC_INCLUDE_DIRS`` is also required
+# ``XalanC_LIBRARIES``
+#   Xalan libraries to be linked; note ``XercesC_LIBRARIES`` is also
+#   required
+#
+# Cache variables
+# ^^^^^^^^^^^^^^^
+#
+# The following cache variables may also be set:
+#
+# ``XalanC_INCLUDE_DIR``
+#   the directory containing the Xalan headers
+# ``XalanC_LIBRARY``
+#   the Xalan library
+
+# Written by Roger Leigh <rleigh@codelibre.net>
+
+#=============================================================================
+# Copyright 2016 University of Dundee
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(_XalanC_GET_VERSION  version_hdr)
+    file(STRINGS ${version_hdr} _contents REGEX "^[ \t]*#define XALAN_VERSION_.*")
+    if(_contents)
+        string(REGEX REPLACE "[^*]*#define XALAN_VERSION_MAJOR[ \t]+([0-9]+).*" "\\1" XalanC_MAJOR "${_contents}")
+        string(REGEX REPLACE "[^*]*#define XALAN_VERSION_MINOR[ \t]+([0-9]+).*" "\\1" XalanC_MINOR "${_contents}")
+        string(REGEX REPLACE "[^*]*#define XALAN_VERSION_REVISION[ \t]+([0-9]+).*" "\\1" XalanC_PATCH "${_contents}")
+
+        if(NOT XalanC_MAJOR MATCHES "^[0-9]+$")
+            message(FATAL_ERROR "Version parsing failed for XALAN_VERSION_MAJOR!")
+        endif()
+        if(NOT XalanC_MINOR MATCHES "^[0-9]+$")
+            message(FATAL_ERROR "Version parsing failed for XALAN_VERSION_MINOR!")
+        endif()
+        if(NOT XalanC_PATCH MATCHES "^[0-9]+$")
+            message(FATAL_ERROR "Version parsing failed for XALAN_VERSION_REVISION!")
+        endif()
+
+        set(XalanC_VERSION "${XalanC_MAJOR}.${XalanC_MINOR}.${XalanC_PATCH}" PARENT_SCOPE)
+        set(XalanC_VERSION_MAJOR "${XalanC_MAJOR}" PARENT_SCOPE)
+        set(XalanC_VERSION_MINOR "${XalanC_MINOR}" PARENT_SCOPE)
+        set(XalanC_VERSION_PATCH "${XalanC_PATCH}" PARENT_SCOPE)
+    else()
+        message(FATAL_ERROR "Include file ${version_hdr} does not exist or does not contain expected version information")
+    endif()
+endfunction()
+
+# Find include directory
+find_path(XalanC_INCLUDE_DIR
+          NAMES "xalanc/XalanTransformer/XalanTransformer.hpp"
+          DOC "Xalan-C++ include directory")
+mark_as_advanced(XalanC_INCLUDE_DIR)
+
+if(XalanC_INCLUDE_DIR)
+  _XalanC_GET_VERSION("${XalanC_INCLUDE_DIR}/xalanc/Include/XalanVersion.hpp")
+endif()
+
+if(NOT XalanC_LIBRARY)
+  # Find all XalanC libraries
+  find_library(XalanC_LIBRARY_RELEASE
+               NAMES "Xalan-C" "xalan-c"
+                     "Xalan-C_${XalanC_VERSION_MAJOR}"
+                     "Xalan-C_${XalanC_VERSION_MAJOR}_${XalanC_VERSION_MINOR}"
+               DOC "Xalan-C++ libraries (release)")
+  find_library(XalanC_LIBRARY_DEBUG
+               NAMES "Xalan-CD" "xalan-cd"
+                     "Xalan-C_${XalanC_VERSION_MAJOR}D"
+                     "Xalan-C_${XalanC_VERSION_MAJOR}_${XalanC_VERSION_MINOR}D"
+               DOC "Xalan-C++ libraries (debug)")
+  include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+  select_library_configurations(XalanC)
+  mark_as_advanced(XalanC_LIBRARY_RELEASE XalanC_LIBRARY_DEBUG)
+endif()
+
+unset(XalanC_VERSION_MAJOR)
+unset(XalanC_VERSION_MINOR)
+unset(XalanC_VERSION_PATCH)
+
+unset(XalanC_XERCESC_REQUIRED)
+if(XalanC_FIND_REQUIRED)
+  set(XalanC_XERCESC_REQUIRED REQUIRED)
+endif()
+find_package(XercesC ${XalanC_XERCESC_REQUIRED})
+unset(XalanC_XERCESC_REQUIRED)
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(XalanC
+                                  FOUND_VAR XalanC_FOUND
+                                  REQUIRED_VARS XalanC_LIBRARY
+                                                XalanC_INCLUDE_DIR
+                                                XalanC_VERSION
+                                                XercesC_FOUND
+                                  VERSION_VAR XalanC_VERSION
+                                  FAIL_MESSAGE "Failed to find XalanC")
+
+if(XalanC_FOUND)
+  set(XalanC_INCLUDE_DIRS "${XalanC_INCLUDE_DIR}" ${XercesC_INCLUDE_DIRS})
+  set(XalanC_LIBRARIES "${XalanC_LIBRARY}" ${XercesC_LIBRARIES})
+
+  # For header-only libraries
+  if(NOT TARGET XalanC::XalanC)
+    add_library(XalanC::XalanC UNKNOWN IMPORTED)
+    if(XalanC_INCLUDE_DIRS)
+      set_target_properties(XalanC::XalanC PROPERTIES
+        INTERFACE_INCLUDE_DIRECTORIES "${XalanC_INCLUDE_DIRS}")
+    endif()
+    if(EXISTS "${XalanC_LIBRARY}")
+      set_target_properties(XalanC::XalanC PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
+        IMPORTED_LOCATION "${XalanC_LIBRARY}")
+    endif()
+    if(EXISTS "${XalanC_LIBRARY_DEBUG}")
+      set_property(TARGET XalanC::XalanC APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS DEBUG)
+      set_target_properties(XalanC::XalanC PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "CXX"
+        IMPORTED_LOCATION_DEBUG "${XalanC_LIBRARY_DEBUG}")
+    endif()
+    if(EXISTS "${XalanC_LIBRARY_RELEASE}")
+      set_property(TARGET XalanC::XalanC APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS RELEASE)
+      set_target_properties(XalanC::XalanC PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "CXX"
+        IMPORTED_LOCATION_RELEASE "${XalanC_LIBRARY_RELEASE}")
+    endif()
+    set_target_properties(XalanC::XalanC PROPERTIES INTERFACE_LINK_LIBRARIES XercesC::XercesC)
+  endif()
+endif()
diff --git a/share/cmake-3.6/Modules/FindXercesC.cmake b/share/cmake-3.6/Modules/FindXercesC.cmake
new file mode 100644
index 0000000..a4b80e5
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindXercesC.cmake
@@ -0,0 +1,140 @@
+#.rst:
+# FindXercesC
+# -----------
+#
+# Find the Apache Xerces-C++ validating XML parser headers and libraries.
+#
+# Imported targets
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines the following :prop_tgt:`IMPORTED` targets:
+#
+# ``XercesC::XercesC``
+#   The Xerces-C++ ``xerces-c`` library, if found.
+#
+# Result variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module will set the following variables in your project:
+#
+# ``XercesC_FOUND``
+#   true if the Xerces headers and libraries were found
+# ``XercesC_VERSION``
+#   Xerces release version
+# ``XercesC_INCLUDE_DIRS``
+#   the directory containing the Xerces headers
+# ``XercesC_LIBRARIES``
+#   Xerces libraries to be linked
+#
+# Cache variables
+# ^^^^^^^^^^^^^^^
+#
+# The following cache variables may also be set:
+#
+# ``XercesC_INCLUDE_DIR``
+#   the directory containing the Xerces headers
+# ``XercesC_LIBRARY``
+#   the Xerces library
+
+# Written by Roger Leigh <rleigh@codelibre.net>
+
+#=============================================================================
+# Copyright 2014-2015 University of Dundee
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(_XercesC_GET_VERSION  version_hdr)
+    file(STRINGS ${version_hdr} _contents REGEX "^[ \t]*#define XERCES_VERSION_.*")
+    if(_contents)
+        string(REGEX REPLACE ".*#define XERCES_VERSION_MAJOR[ \t]+([0-9]+).*" "\\1" XercesC_MAJOR "${_contents}")
+        string(REGEX REPLACE ".*#define XERCES_VERSION_MINOR[ \t]+([0-9]+).*" "\\1" XercesC_MINOR "${_contents}")
+        string(REGEX REPLACE ".*#define XERCES_VERSION_REVISION[ \t]+([0-9]+).*" "\\1" XercesC_PATCH "${_contents}")
+
+        if(NOT XercesC_MAJOR MATCHES "^[0-9]+$")
+            message(FATAL_ERROR "Version parsing failed for XERCES_VERSION_MAJOR!")
+        endif()
+        if(NOT XercesC_MINOR MATCHES "^[0-9]+$")
+            message(FATAL_ERROR "Version parsing failed for XERCES_VERSION_MINOR!")
+        endif()
+        if(NOT XercesC_PATCH MATCHES "^[0-9]+$")
+            message(FATAL_ERROR "Version parsing failed for XERCES_VERSION_REVISION!")
+        endif()
+
+        set(XercesC_VERSION "${XercesC_MAJOR}.${XercesC_MINOR}.${XercesC_PATCH}" PARENT_SCOPE)
+    else()
+        message(FATAL_ERROR "Include file ${version_hdr} does not exist or does not contain expected version information")
+    endif()
+endfunction()
+
+# Find include directory
+find_path(XercesC_INCLUDE_DIR
+          NAMES "xercesc/util/PlatformUtils.hpp"
+          DOC "Xerces-C++ include directory")
+mark_as_advanced(XercesC_INCLUDE_DIR)
+
+if(NOT XercesC_LIBRARY)
+  # Find all XercesC libraries
+  find_library(XercesC_LIBRARY_RELEASE
+               NAMES "xerces-c" "xerces-c_3"
+               DOC "Xerces-C++ libraries (release)")
+  find_library(XercesC_LIBRARY_DEBUG
+               NAMES "xerces-cd" "xerces-c_3D" "xerces-c_3_1D"
+               DOC "Xerces-C++ libraries (debug)")
+  include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+  select_library_configurations(XercesC)
+  mark_as_advanced(XercesC_LIBRARY_RELEASE XercesC_LIBRARY_DEBUG)
+endif()
+
+if(XercesC_INCLUDE_DIR)
+  _XercesC_GET_VERSION("${XercesC_INCLUDE_DIR}/xercesc/util/XercesVersion.hpp")
+endif()
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(XercesC
+                                  FOUND_VAR XercesC_FOUND
+                                  REQUIRED_VARS XercesC_LIBRARY
+                                                XercesC_INCLUDE_DIR
+                                                XercesC_VERSION
+                                  VERSION_VAR XercesC_VERSION
+                                  FAIL_MESSAGE "Failed to find XercesC")
+
+if(XercesC_FOUND)
+  set(XercesC_INCLUDE_DIRS "${XercesC_INCLUDE_DIR}")
+  set(XercesC_LIBRARIES "${XercesC_LIBRARY}")
+
+  # For header-only libraries
+  if(NOT TARGET XercesC::XercesC)
+    add_library(XercesC::XercesC UNKNOWN IMPORTED)
+    if(XercesC_INCLUDE_DIRS)
+      set_target_properties(XercesC::XercesC PROPERTIES
+        INTERFACE_INCLUDE_DIRECTORIES "${XercesC_INCLUDE_DIRS}")
+    endif()
+    if(EXISTS "${XercesC_LIBRARY}")
+      set_target_properties(XercesC::XercesC PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES "CXX"
+        IMPORTED_LOCATION "${XercesC_LIBRARY}")
+    endif()
+    if(EXISTS "${XercesC_LIBRARY_DEBUG}")
+      set_property(TARGET XercesC::XercesC APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS DEBUG)
+      set_target_properties(XercesC::XercesC PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_DEBUG "CXX"
+        IMPORTED_LOCATION_DEBUG "${XercesC_LIBRARY_DEBUG}")
+    endif()
+    if(EXISTS "${XercesC_LIBRARY_RELEASE}")
+      set_property(TARGET XercesC::XercesC APPEND PROPERTY
+        IMPORTED_CONFIGURATIONS RELEASE)
+      set_target_properties(XercesC::XercesC PROPERTIES
+        IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "CXX"
+        IMPORTED_LOCATION_RELEASE "${XercesC_LIBRARY_RELEASE}")
+    endif()
+  endif()
+endif()
diff --git a/share/cmake-3.6/Modules/FindZLIB.cmake b/share/cmake-3.6/Modules/FindZLIB.cmake
new file mode 100644
index 0000000..a57f450
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindZLIB.cmake
@@ -0,0 +1,158 @@
+#.rst:
+# FindZLIB
+# --------
+#
+# Find the native ZLIB includes and library.
+#
+# IMPORTED Targets
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines :prop_tgt:`IMPORTED` target ``ZLIB::ZLIB``, if
+# ZLIB has been found.
+#
+# Result Variables
+# ^^^^^^^^^^^^^^^^
+#
+# This module defines the following variables:
+#
+# ::
+#
+#   ZLIB_INCLUDE_DIRS   - where to find zlib.h, etc.
+#   ZLIB_LIBRARIES      - List of libraries when using zlib.
+#   ZLIB_FOUND          - True if zlib found.
+#
+# ::
+#
+#   ZLIB_VERSION_STRING - The version of zlib found (x.y.z)
+#   ZLIB_VERSION_MAJOR  - The major version of zlib
+#   ZLIB_VERSION_MINOR  - The minor version of zlib
+#   ZLIB_VERSION_PATCH  - The patch version of zlib
+#   ZLIB_VERSION_TWEAK  - The tweak version of zlib
+#
+# Backward Compatibility
+# ^^^^^^^^^^^^^^^^^^^^^^
+#
+# The following variable are provided for backward compatibility
+#
+# ::
+#
+#   ZLIB_MAJOR_VERSION  - The major version of zlib
+#   ZLIB_MINOR_VERSION  - The minor version of zlib
+#   ZLIB_PATCH_VERSION  - The patch version of zlib
+#
+# Hints
+# ^^^^^
+#
+# A user may set ``ZLIB_ROOT`` to a zlib installation root to tell this
+# module where to look.
+
+#=============================================================================
+# Copyright 2001-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(_ZLIB_SEARCHES)
+
+# Search ZLIB_ROOT first if it is set.
+if(ZLIB_ROOT)
+  set(_ZLIB_SEARCH_ROOT PATHS ${ZLIB_ROOT} NO_DEFAULT_PATH)
+  list(APPEND _ZLIB_SEARCHES _ZLIB_SEARCH_ROOT)
+endif()
+
+# Normal search.
+set(_ZLIB_SEARCH_NORMAL
+  PATHS "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\Zlib;InstallPath]"
+        "$ENV{PROGRAMFILES}/zlib"
+  )
+list(APPEND _ZLIB_SEARCHES _ZLIB_SEARCH_NORMAL)
+
+set(ZLIB_NAMES z zlib zdll zlib1)
+set(ZLIB_NAMES_DEBUG zlibd zlibd1)
+
+# Try each search configuration.
+foreach(search ${_ZLIB_SEARCHES})
+  find_path(ZLIB_INCLUDE_DIR NAMES zlib.h ${${search}} PATH_SUFFIXES include)
+endforeach()
+
+# Allow ZLIB_LIBRARY to be set manually, as the location of the zlib library
+if(NOT ZLIB_LIBRARY)
+  foreach(search ${_ZLIB_SEARCHES})
+    find_library(ZLIB_LIBRARY_RELEASE NAMES ${ZLIB_NAMES} ${${search}} PATH_SUFFIXES lib)
+    find_library(ZLIB_LIBRARY_DEBUG NAMES ${ZLIB_NAMES_DEBUG} ${${search}} PATH_SUFFIXES lib)
+  endforeach()
+
+  include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
+  select_library_configurations(ZLIB)
+endif()
+
+unset(ZLIB_NAMES)
+unset(ZLIB_NAMES_DEBUG)
+
+mark_as_advanced(ZLIB_LIBRARY ZLIB_INCLUDE_DIR)
+
+if(ZLIB_INCLUDE_DIR AND EXISTS "${ZLIB_INCLUDE_DIR}/zlib.h")
+    file(STRINGS "${ZLIB_INCLUDE_DIR}/zlib.h" ZLIB_H REGEX "^#define ZLIB_VERSION \"[^\"]*\"$")
+
+    string(REGEX REPLACE "^.*ZLIB_VERSION \"([0-9]+).*$" "\\1" ZLIB_VERSION_MAJOR "${ZLIB_H}")
+    string(REGEX REPLACE "^.*ZLIB_VERSION \"[0-9]+\\.([0-9]+).*$" "\\1" ZLIB_VERSION_MINOR  "${ZLIB_H}")
+    string(REGEX REPLACE "^.*ZLIB_VERSION \"[0-9]+\\.[0-9]+\\.([0-9]+).*$" "\\1" ZLIB_VERSION_PATCH "${ZLIB_H}")
+    set(ZLIB_VERSION_STRING "${ZLIB_VERSION_MAJOR}.${ZLIB_VERSION_MINOR}.${ZLIB_VERSION_PATCH}")
+
+    # only append a TWEAK version if it exists:
+    set(ZLIB_VERSION_TWEAK "")
+    if( "${ZLIB_H}" MATCHES "ZLIB_VERSION \"[0-9]+\\.[0-9]+\\.[0-9]+\\.([0-9]+)")
+        set(ZLIB_VERSION_TWEAK "${CMAKE_MATCH_1}")
+        set(ZLIB_VERSION_STRING "${ZLIB_VERSION_STRING}.${ZLIB_VERSION_TWEAK}")
+    endif()
+
+    set(ZLIB_MAJOR_VERSION "${ZLIB_VERSION_MAJOR}")
+    set(ZLIB_MINOR_VERSION "${ZLIB_VERSION_MINOR}")
+    set(ZLIB_PATCH_VERSION "${ZLIB_VERSION_PATCH}")
+endif()
+
+# handle the QUIETLY and REQUIRED arguments and set ZLIB_FOUND to TRUE if
+# all listed variables are TRUE
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(ZLIB REQUIRED_VARS ZLIB_LIBRARY ZLIB_INCLUDE_DIR
+                                       VERSION_VAR ZLIB_VERSION_STRING)
+
+if(ZLIB_FOUND)
+    set(ZLIB_INCLUDE_DIRS ${ZLIB_INCLUDE_DIR})
+
+    if(NOT ZLIB_LIBRARIES)
+      set(ZLIB_LIBRARIES ${ZLIB_LIBRARY})
+    endif()
+
+    if(NOT TARGET ZLIB::ZLIB)
+      add_library(ZLIB::ZLIB UNKNOWN IMPORTED)
+      set_target_properties(ZLIB::ZLIB PROPERTIES
+        INTERFACE_INCLUDE_DIRECTORIES "${ZLIB_INCLUDE_DIRS}")
+
+      if(ZLIB_LIBRARY_RELEASE)
+        set_property(TARGET ZLIB::ZLIB APPEND PROPERTY
+          IMPORTED_CONFIGURATIONS RELEASE)
+        set_target_properties(ZLIB::ZLIB PROPERTIES
+          IMPORTED_LOCATION_RELEASE "${ZLIB_LIBRARY_RELEASE}")
+      endif()
+
+      if(ZLIB_LIBRARY_DEBUG)
+        set_property(TARGET ZLIB::ZLIB APPEND PROPERTY
+          IMPORTED_CONFIGURATIONS DEBUG)
+        set_target_properties(ZLIB::ZLIB PROPERTIES
+          IMPORTED_LOCATION_DEBUG "${ZLIB_LIBRARY_DEBUG}")
+      endif()
+
+      if(NOT ZLIB_LIBRARY_RELEASE AND NOT ZLIB_LIBRARY_DEBUG)
+        set_property(TARGET ZLIB::ZLIB APPEND PROPERTY
+          IMPORTED_LOCATION "${ZLIB_LIBRARY}")
+      endif()
+    endif()
+endif()
diff --git a/share/cmake-3.2/Modules/Findosg.cmake b/share/cmake-3.6/Modules/Findosg.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Findosg.cmake
rename to share/cmake-3.6/Modules/Findosg.cmake
diff --git a/share/cmake-3.2/Modules/FindosgAnimation.cmake b/share/cmake-3.6/Modules/FindosgAnimation.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgAnimation.cmake
rename to share/cmake-3.6/Modules/FindosgAnimation.cmake
diff --git a/share/cmake-3.2/Modules/FindosgDB.cmake b/share/cmake-3.6/Modules/FindosgDB.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgDB.cmake
rename to share/cmake-3.6/Modules/FindosgDB.cmake
diff --git a/share/cmake-3.2/Modules/FindosgFX.cmake b/share/cmake-3.6/Modules/FindosgFX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgFX.cmake
rename to share/cmake-3.6/Modules/FindosgFX.cmake
diff --git a/share/cmake-3.2/Modules/FindosgGA.cmake b/share/cmake-3.6/Modules/FindosgGA.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgGA.cmake
rename to share/cmake-3.6/Modules/FindosgGA.cmake
diff --git a/share/cmake-3.2/Modules/FindosgIntrospection.cmake b/share/cmake-3.6/Modules/FindosgIntrospection.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgIntrospection.cmake
rename to share/cmake-3.6/Modules/FindosgIntrospection.cmake
diff --git a/share/cmake-3.2/Modules/FindosgManipulator.cmake b/share/cmake-3.6/Modules/FindosgManipulator.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgManipulator.cmake
rename to share/cmake-3.6/Modules/FindosgManipulator.cmake
diff --git a/share/cmake-3.2/Modules/FindosgParticle.cmake b/share/cmake-3.6/Modules/FindosgParticle.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgParticle.cmake
rename to share/cmake-3.6/Modules/FindosgParticle.cmake
diff --git a/share/cmake-3.2/Modules/FindosgPresentation.cmake b/share/cmake-3.6/Modules/FindosgPresentation.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgPresentation.cmake
rename to share/cmake-3.6/Modules/FindosgPresentation.cmake
diff --git a/share/cmake-3.2/Modules/FindosgProducer.cmake b/share/cmake-3.6/Modules/FindosgProducer.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgProducer.cmake
rename to share/cmake-3.6/Modules/FindosgProducer.cmake
diff --git a/share/cmake-3.2/Modules/FindosgQt.cmake b/share/cmake-3.6/Modules/FindosgQt.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgQt.cmake
rename to share/cmake-3.6/Modules/FindosgQt.cmake
diff --git a/share/cmake-3.2/Modules/FindosgShadow.cmake b/share/cmake-3.6/Modules/FindosgShadow.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgShadow.cmake
rename to share/cmake-3.6/Modules/FindosgShadow.cmake
diff --git a/share/cmake-3.2/Modules/FindosgSim.cmake b/share/cmake-3.6/Modules/FindosgSim.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgSim.cmake
rename to share/cmake-3.6/Modules/FindosgSim.cmake
diff --git a/share/cmake-3.2/Modules/FindosgTerrain.cmake b/share/cmake-3.6/Modules/FindosgTerrain.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgTerrain.cmake
rename to share/cmake-3.6/Modules/FindosgTerrain.cmake
diff --git a/share/cmake-3.2/Modules/FindosgText.cmake b/share/cmake-3.6/Modules/FindosgText.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgText.cmake
rename to share/cmake-3.6/Modules/FindosgText.cmake
diff --git a/share/cmake-3.2/Modules/FindosgUtil.cmake b/share/cmake-3.6/Modules/FindosgUtil.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgUtil.cmake
rename to share/cmake-3.6/Modules/FindosgUtil.cmake
diff --git a/share/cmake-3.2/Modules/FindosgViewer.cmake b/share/cmake-3.6/Modules/FindosgViewer.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgViewer.cmake
rename to share/cmake-3.6/Modules/FindosgViewer.cmake
diff --git a/share/cmake-3.2/Modules/FindosgVolume.cmake b/share/cmake-3.6/Modules/FindosgVolume.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgVolume.cmake
rename to share/cmake-3.6/Modules/FindosgVolume.cmake
diff --git a/share/cmake-3.2/Modules/FindosgWidget.cmake b/share/cmake-3.6/Modules/FindosgWidget.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindosgWidget.cmake
rename to share/cmake-3.6/Modules/FindosgWidget.cmake
diff --git a/share/cmake-3.2/Modules/Findosg_functions.cmake b/share/cmake-3.6/Modules/Findosg_functions.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Findosg_functions.cmake
rename to share/cmake-3.6/Modules/Findosg_functions.cmake
diff --git a/share/cmake-3.6/Modules/FindwxWidgets.cmake b/share/cmake-3.6/Modules/FindwxWidgets.cmake
new file mode 100644
index 0000000..8c07e6c
--- /dev/null
+++ b/share/cmake-3.6/Modules/FindwxWidgets.cmake
@@ -0,0 +1,1132 @@
+#.rst:
+# FindwxWidgets
+# -------------
+#
+# Find a wxWidgets (a.k.a., wxWindows) installation.
+#
+# This module finds if wxWidgets is installed and selects a default
+# configuration to use.  wxWidgets is a modular library.  To specify the
+# modules that you will use, you need to name them as components to the
+# package:
+#
+# find_package(wxWidgets COMPONENTS core base ...)
+#
+# There are two search branches: a windows style and a unix style.  For
+# windows, the following variables are searched for and set to defaults
+# in case of multiple choices.  Change them if the defaults are not
+# desired (i.e., these are the only variables you should change to
+# select a configuration):
+#
+# ::
+#
+#   wxWidgets_ROOT_DIR      - Base wxWidgets directory
+#                             (e.g., C:/wxWidgets-2.6.3).
+#   wxWidgets_LIB_DIR       - Path to wxWidgets libraries
+#                             (e.g., C:/wxWidgets-2.6.3/lib/vc_lib).
+#   wxWidgets_CONFIGURATION - Configuration to use
+#                             (e.g., msw, mswd, mswu, mswunivud, etc.)
+#   wxWidgets_EXCLUDE_COMMON_LIBRARIES
+#                           - Set to TRUE to exclude linking of
+#                             commonly required libs (e.g., png tiff
+#                             jpeg zlib regex expat).
+#
+#
+#
+# For unix style it uses the wx-config utility.  You can select between
+# debug/release, unicode/ansi, universal/non-universal, and
+# static/shared in the QtDialog or ccmake interfaces by turning ON/OFF
+# the following variables:
+#
+# ::
+#
+#   wxWidgets_USE_DEBUG
+#   wxWidgets_USE_UNICODE
+#   wxWidgets_USE_UNIVERSAL
+#   wxWidgets_USE_STATIC
+#
+#
+#
+# There is also a wxWidgets_CONFIG_OPTIONS variable for all other
+# options that need to be passed to the wx-config utility.  For example,
+# to use the base toolkit found in the /usr/local path, set the variable
+# (before calling the FIND_PACKAGE command) as such:
+#
+# ::
+#
+#   set(wxWidgets_CONFIG_OPTIONS --toolkit=base --prefix=/usr)
+#
+#
+#
+# The following are set after the configuration is done for both windows
+# and unix style:
+#
+# ::
+#
+#   wxWidgets_FOUND            - Set to TRUE if wxWidgets was found.
+#   wxWidgets_INCLUDE_DIRS     - Include directories for WIN32
+#                                i.e., where to find "wx/wx.h" and
+#                                "wx/setup.h"; possibly empty for unices.
+#   wxWidgets_LIBRARIES        - Path to the wxWidgets libraries.
+#   wxWidgets_LIBRARY_DIRS     - compile time link dirs, useful for
+#                                rpath on UNIX. Typically an empty string
+#                                in WIN32 environment.
+#   wxWidgets_DEFINITIONS      - Contains defines required to compile/link
+#                                against WX, e.g. WXUSINGDLL
+#   wxWidgets_DEFINITIONS_DEBUG- Contains defines required to compile/link
+#                                against WX debug builds, e.g. __WXDEBUG__
+#   wxWidgets_CXX_FLAGS        - Include dirs and compiler flags for
+#                                unices, empty on WIN32. Essentially
+#                                "`wx-config --cxxflags`".
+#   wxWidgets_USE_FILE         - Convenience include file.
+#
+#
+#
+# Sample usage:
+#
+# ::
+#
+#    # Note that for MinGW users the order of libs is important!
+#    find_package(wxWidgets COMPONENTS net gl core base)
+#    if(wxWidgets_FOUND)
+#      include(${wxWidgets_USE_FILE})
+#      # and for each of your dependent executable/library targets:
+#      target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
+#    endif()
+#
+#
+#
+# If wxWidgets is required (i.e., not an optional part):
+#
+# ::
+#
+#    find_package(wxWidgets REQUIRED net gl core base)
+#    include(${wxWidgets_USE_FILE})
+#    # and for each of your dependent executable/library targets:
+#    target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+# Copyright 2007-2009 Miguel A. Figueroa-Villanueva <miguelf at ieee dot org>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#
+# FIXME: check this and provide a correct sample usage...
+#        Remember to connect back to the upper text.
+# Sample usage with monolithic wx build:
+#
+#   find_package(wxWidgets COMPONENTS mono)
+#   ...
+
+# NOTES
+#
+# This module has been tested on the WIN32 platform with wxWidgets
+# 2.6.2, 2.6.3, and 2.5.3. However, it has been designed to
+# easily extend support to all possible builds, e.g., static/shared,
+# debug/release, unicode, universal, multilib/monolithic, etc..
+#
+# If you want to use the module and your build type is not supported
+# out-of-the-box, please contact me to exchange information on how
+# your system is setup and I'll try to add support for it.
+#
+# AUTHOR
+#
+# Miguel A. Figueroa-Villanueva (miguelf at ieee dot org).
+# Jan Woetzel (jw at mip.informatik.uni-kiel.de).
+#
+# Based on previous works of:
+# Jan Woetzel (FindwxWindows.cmake),
+# Jorgen Bodde and Jerry Fath (FindwxWin.cmake).
+
+# TODO/ideas
+#
+# (1) Option/Setting to use all available wx libs
+# In contrast to expert developer who lists the
+# minimal set of required libs in wxWidgets_USE_LIBS
+# there is the newbie user:
+#   - who just wants to link against WX with more 'magic'
+#   - doesn't know the internal structure of WX or how it was built,
+#     in particular if it is monolithic or not
+#   - want to link against all available WX libs
+# Basically, the intent here is to mimic what wx-config would do by
+# default (i.e., `wx-config --libs`).
+#
+# Possible solution:
+#   Add a reserved keyword "std" that initializes to what wx-config
+# would default to. If the user has not set the wxWidgets_USE_LIBS,
+# default to "std" instead of "base core" as it is now. To implement
+# "std" will basically boil down to a FOR_EACH lib-FOUND, but maybe
+# checking whether a minimal set was found.
+
+
+# FIXME: This and all the DBG_MSG calls should be removed after the
+# module stabilizes.
+#
+# Helper macro to control the debugging output globally. There are
+# two versions for controlling how verbose your output should be.
+macro(DBG_MSG _MSG)
+#  message(STATUS
+#    "${CMAKE_CURRENT_LIST_FILE}(${CMAKE_CURRENT_LIST_LINE}): ${_MSG}")
+endmacro()
+macro(DBG_MSG_V _MSG)
+#  message(STATUS
+#    "${CMAKE_CURRENT_LIST_FILE}(${CMAKE_CURRENT_LIST_LINE}): ${_MSG}")
+endmacro()
+
+# Clear return values in case the module is loaded more than once.
+set(wxWidgets_FOUND FALSE)
+set(wxWidgets_INCLUDE_DIRS "")
+set(wxWidgets_LIBRARIES    "")
+set(wxWidgets_LIBRARY_DIRS "")
+set(wxWidgets_CXX_FLAGS    "")
+
+# DEPRECATED: This is a patch to support the DEPRECATED use of
+# wxWidgets_USE_LIBS.
+#
+# If wxWidgets_USE_LIBS is set:
+# - if using <components>, then override wxWidgets_USE_LIBS
+# - else set wxWidgets_FIND_COMPONENTS to wxWidgets_USE_LIBS
+if(wxWidgets_USE_LIBS AND NOT wxWidgets_FIND_COMPONENTS)
+  set(wxWidgets_FIND_COMPONENTS ${wxWidgets_USE_LIBS})
+endif()
+DBG_MSG("wxWidgets_FIND_COMPONENTS : ${wxWidgets_FIND_COMPONENTS}")
+
+# Add the convenience use file if available.
+#
+# Get dir of this file which may reside in:
+# - CMAKE_MAKE_ROOT/Modules on CMake installation
+# - CMAKE_MODULE_PATH if user prefers his own specialized version
+set(wxWidgets_USE_FILE "")
+get_filename_component(
+  wxWidgets_CURRENT_LIST_DIR ${CMAKE_CURRENT_LIST_FILE} PATH)
+# Prefer an existing customized version, but the user might override
+# the FindwxWidgets module and not the UsewxWidgets one.
+if(EXISTS "${wxWidgets_CURRENT_LIST_DIR}/UsewxWidgets.cmake")
+  set(wxWidgets_USE_FILE
+    "${wxWidgets_CURRENT_LIST_DIR}/UsewxWidgets.cmake")
+else()
+  set(wxWidgets_USE_FILE UsewxWidgets)
+endif()
+
+#=====================================================================
+# Determine whether unix or win32 paths should be used
+#=====================================================================
+if(WIN32 AND NOT CYGWIN AND NOT MSYS AND NOT CMAKE_CROSSCOMPILING)
+  set(wxWidgets_FIND_STYLE "win32")
+else()
+  set(wxWidgets_FIND_STYLE "unix")
+endif()
+
+#=====================================================================
+# WIN32_FIND_STYLE
+#=====================================================================
+if(wxWidgets_FIND_STYLE STREQUAL "win32")
+  # Useful common wx libs needed by almost all components.
+  set(wxWidgets_COMMON_LIBRARIES png tiff jpeg zlib regex expat)
+
+  # DEPRECATED: Use find_package(wxWidgets COMPONENTS mono) instead.
+  if(NOT wxWidgets_FIND_COMPONENTS)
+    if(wxWidgets_USE_MONOLITHIC)
+      set(wxWidgets_FIND_COMPONENTS mono)
+    else()
+      set(wxWidgets_FIND_COMPONENTS core base) # this is default
+    endif()
+  endif()
+
+  # Add the common (usually required libs) unless
+  # wxWidgets_EXCLUDE_COMMON_LIBRARIES has been set.
+  if(NOT wxWidgets_EXCLUDE_COMMON_LIBRARIES)
+    list(APPEND wxWidgets_FIND_COMPONENTS
+      ${wxWidgets_COMMON_LIBRARIES})
+  endif()
+
+  #-------------------------------------------------------------------
+  # WIN32: Helper MACROS
+  #-------------------------------------------------------------------
+  #
+  # Get filename components for a configuration. For example,
+  #   if _CONFIGURATION = mswunivud, then _UNV=univ, _UCD=u _DBG=d
+  #   if _CONFIGURATION = mswu,      then _UNV="",   _UCD=u _DBG=""
+  #
+  macro(WX_GET_NAME_COMPONENTS _CONFIGURATION _UNV _UCD _DBG)
+    string(REGEX MATCH "univ" ${_UNV} "${_CONFIGURATION}")
+    string(REGEX REPLACE "msw.*(u)[d]*$" "u" ${_UCD} "${_CONFIGURATION}")
+    if(${_UCD} STREQUAL ${_CONFIGURATION})
+      set(${_UCD} "")
+    endif()
+    string(REGEX MATCH "d$" ${_DBG} "${_CONFIGURATION}")
+  endmacro()
+
+  #
+  # Find libraries associated to a configuration.
+  #
+  macro(WX_FIND_LIBS _UNV _UCD _DBG)
+    DBG_MSG_V("m_unv = ${_UNV}")
+    DBG_MSG_V("m_ucd = ${_UCD}")
+    DBG_MSG_V("m_dbg = ${_DBG}")
+
+    # FIXME: What if both regex libs are available. regex should be
+    # found outside the loop and only wx${LIB}${_UCD}${_DBG}.
+    # Find wxWidgets common libraries.
+    foreach(LIB ${wxWidgets_COMMON_LIBRARIES} scintilla)
+      find_library(WX_${LIB}${_DBG}
+        NAMES
+        wx${LIB}${_UCD}${_DBG} # for regex
+        wx${LIB}${_DBG}
+        PATHS ${WX_LIB_DIR}
+        NO_DEFAULT_PATH
+        )
+      mark_as_advanced(WX_${LIB}${_DBG})
+    endforeach()
+
+    # Find wxWidgets multilib base libraries.
+    find_library(WX_base${_DBG}
+      NAMES
+      wxbase31${_UCD}${_DBG}
+      wxbase30${_UCD}${_DBG}
+      wxbase29${_UCD}${_DBG}
+      wxbase28${_UCD}${_DBG}
+      wxbase27${_UCD}${_DBG}
+      wxbase26${_UCD}${_DBG}
+      wxbase25${_UCD}${_DBG}
+      PATHS ${WX_LIB_DIR}
+      NO_DEFAULT_PATH
+      )
+    mark_as_advanced(WX_base${_DBG})
+    foreach(LIB net odbc xml)
+      find_library(WX_${LIB}${_DBG}
+        NAMES
+        wxbase31${_UCD}${_DBG}_${LIB}
+        wxbase30${_UCD}${_DBG}_${LIB}
+        wxbase29${_UCD}${_DBG}_${LIB}
+        wxbase28${_UCD}${_DBG}_${LIB}
+        wxbase27${_UCD}${_DBG}_${LIB}
+        wxbase26${_UCD}${_DBG}_${LIB}
+        wxbase25${_UCD}${_DBG}_${LIB}
+        PATHS ${WX_LIB_DIR}
+        NO_DEFAULT_PATH
+        )
+      mark_as_advanced(WX_${LIB}${_DBG})
+    endforeach()
+
+    # Find wxWidgets monolithic library.
+    find_library(WX_mono${_DBG}
+      NAMES
+      wxmsw${_UNV}31${_UCD}${_DBG}
+      wxmsw${_UNV}30${_UCD}${_DBG}
+      wxmsw${_UNV}29${_UCD}${_DBG}
+      wxmsw${_UNV}28${_UCD}${_DBG}
+      wxmsw${_UNV}27${_UCD}${_DBG}
+      wxmsw${_UNV}26${_UCD}${_DBG}
+      wxmsw${_UNV}25${_UCD}${_DBG}
+      PATHS ${WX_LIB_DIR}
+      NO_DEFAULT_PATH
+      )
+    mark_as_advanced(WX_mono${_DBG})
+
+    # Find wxWidgets multilib libraries.
+    foreach(LIB core adv aui html media xrc dbgrid gl qa richtext
+                stc ribbon propgrid webview)
+      find_library(WX_${LIB}${_DBG}
+        NAMES
+        wxmsw${_UNV}31${_UCD}${_DBG}_${LIB}
+        wxmsw${_UNV}30${_UCD}${_DBG}_${LIB}
+        wxmsw${_UNV}29${_UCD}${_DBG}_${LIB}
+        wxmsw${_UNV}28${_UCD}${_DBG}_${LIB}
+        wxmsw${_UNV}27${_UCD}${_DBG}_${LIB}
+        wxmsw${_UNV}26${_UCD}${_DBG}_${LIB}
+        wxmsw${_UNV}25${_UCD}${_DBG}_${LIB}
+        PATHS ${WX_LIB_DIR}
+        NO_DEFAULT_PATH
+        )
+      mark_as_advanced(WX_${LIB}${_DBG})
+    endforeach()
+  endmacro()
+
+  #
+  # Clear all library paths, so that FIND_LIBRARY refinds them.
+  #
+  # Clear a lib, reset its found flag, and mark as advanced.
+  macro(WX_CLEAR_LIB _LIB)
+    set(${_LIB} "${_LIB}-NOTFOUND" CACHE FILEPATH "Cleared." FORCE)
+    set(${_LIB}_FOUND FALSE)
+    mark_as_advanced(${_LIB})
+  endmacro()
+  # Clear all debug or release library paths (arguments are "d" or "").
+  macro(WX_CLEAR_ALL_LIBS _DBG)
+    # Clear wxWidgets common libraries.
+    foreach(LIB ${wxWidgets_COMMON_LIBRARIES} scintilla)
+      WX_CLEAR_LIB(WX_${LIB}${_DBG})
+    endforeach()
+
+    # Clear wxWidgets multilib base libraries.
+    WX_CLEAR_LIB(WX_base${_DBG})
+    foreach(LIB net odbc xml)
+      WX_CLEAR_LIB(WX_${LIB}${_DBG})
+    endforeach()
+
+    # Clear wxWidgets monolithic library.
+    WX_CLEAR_LIB(WX_mono${_DBG})
+
+    # Clear wxWidgets multilib libraries.
+    foreach(LIB core adv aui html media xrc dbgrid gl qa richtext
+                webview stc ribbon propgrid)
+      WX_CLEAR_LIB(WX_${LIB}${_DBG})
+    endforeach()
+  endmacro()
+  # Clear all wxWidgets debug libraries.
+  macro(WX_CLEAR_ALL_DBG_LIBS)
+    WX_CLEAR_ALL_LIBS("d")
+  endmacro()
+  # Clear all wxWidgets release libraries.
+  macro(WX_CLEAR_ALL_REL_LIBS)
+    WX_CLEAR_ALL_LIBS("")
+  endmacro()
+
+  #
+  # Set the wxWidgets_LIBRARIES variable.
+  # Also, Sets output variable wxWidgets_FOUND to FALSE if it fails.
+  #
+  macro(WX_SET_LIBRARIES _LIBS _DBG)
+    DBG_MSG_V("Looking for ${${_LIBS}}")
+    if(WX_USE_REL_AND_DBG)
+      foreach(LIB ${${_LIBS}})
+        DBG_MSG_V("Searching for ${LIB} and ${LIB}d")
+        DBG_MSG_V("WX_${LIB}  : ${WX_${LIB}}")
+        DBG_MSG_V("WX_${LIB}d : ${WX_${LIB}d}")
+        if(WX_${LIB} AND WX_${LIB}d)
+          DBG_MSG_V("Found ${LIB} and ${LIB}d")
+          list(APPEND wxWidgets_LIBRARIES
+            debug ${WX_${LIB}d} optimized ${WX_${LIB}}
+            )
+        else()
+          DBG_MSG_V("- not found due to missing WX_${LIB}=${WX_${LIB}} or WX_${LIB}d=${WX_${LIB}d}")
+          set(wxWidgets_FOUND FALSE)
+        endif()
+      endforeach()
+    else()
+      foreach(LIB ${${_LIBS}})
+        DBG_MSG_V("Searching for ${LIB}${_DBG}")
+        DBG_MSG_V("WX_${LIB}${_DBG} : ${WX_${LIB}${_DBG}}")
+        if(WX_${LIB}${_DBG})
+          DBG_MSG_V("Found ${LIB}${_DBG}")
+          list(APPEND wxWidgets_LIBRARIES ${WX_${LIB}${_DBG}})
+        else()
+          DBG_MSG_V(
+            "- not found due to missing WX_${LIB}${_DBG}=${WX_${LIB}${_DBG}}")
+          set(wxWidgets_FOUND FALSE)
+        endif()
+      endforeach()
+    endif()
+
+    DBG_MSG_V("OpenGL")
+    list(FIND ${_LIBS} gl WX_USE_GL)
+    if(NOT WX_USE_GL EQUAL -1)
+      DBG_MSG_V("- is required.")
+      list(APPEND wxWidgets_LIBRARIES opengl32 glu32)
+    endif()
+
+    list(APPEND wxWidgets_LIBRARIES winmm comctl32 rpcrt4 wsock32)
+  endmacro()
+
+  #-------------------------------------------------------------------
+  # WIN32: Start actual work.
+  #-------------------------------------------------------------------
+
+  # Look for an installation tree.
+  find_path(wxWidgets_ROOT_DIR
+    NAMES include/wx/wx.h
+    PATHS
+      ENV wxWidgets_ROOT_DIR
+      ENV WXWIN
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\wxWidgets_is1;Inno Setup: App Path]"  # WX 2.6.x
+      C:/
+      D:/
+      ENV ProgramFiles
+    PATH_SUFFIXES
+      wxWidgets-3.0.2
+      wxWidgets-3.0.1
+      wxWidgets-3.0.0
+      wxWidgets-2.9.5
+      wxWidgets-2.9.4
+      wxWidgets-2.9.3
+      wxWidgets-2.9.2
+      wxWidgets-2.9.1
+      wxWidgets-2.9.0
+      wxWidgets-2.8.9
+      wxWidgets-2.8.8
+      wxWidgets-2.8.7
+      wxWidgets-2.8.6
+      wxWidgets-2.8.5
+      wxWidgets-2.8.4
+      wxWidgets-2.8.3
+      wxWidgets-2.8.2
+      wxWidgets-2.8.1
+      wxWidgets-2.8.0
+      wxWidgets-2.7.4
+      wxWidgets-2.7.3
+      wxWidgets-2.7.2
+      wxWidgets-2.7.1
+      wxWidgets-2.7.0
+      wxWidgets-2.7.0-1
+      wxWidgets-2.6.4
+      wxWidgets-2.6.3
+      wxWidgets-2.6.2
+      wxWidgets-2.6.1
+      wxWidgets-2.5.4
+      wxWidgets-2.5.3
+      wxWidgets-2.5.2
+      wxWidgets-2.5.1
+      wxWidgets
+    DOC "wxWidgets base/installation directory"
+    )
+
+  # If wxWidgets_ROOT_DIR changed, clear lib dir.
+  if(NOT WX_ROOT_DIR STREQUAL wxWidgets_ROOT_DIR)
+    set(WX_ROOT_DIR ${wxWidgets_ROOT_DIR}
+        CACHE INTERNAL "wxWidgets_ROOT_DIR")
+    set(wxWidgets_LIB_DIR "wxWidgets_LIB_DIR-NOTFOUND"
+        CACHE PATH "Cleared." FORCE)
+  endif()
+
+  if(WX_ROOT_DIR)
+    # Select one default tree inside the already determined wx tree.
+    # Prefer static/shared order usually consistent with build
+    # settings.
+    if(MINGW)
+      set(WX_LIB_DIR_PREFIX gcc)
+    elseif(CMAKE_CL_64)
+      set(WX_LIB_DIR_PREFIX vc_x64)
+    else()
+      set(WX_LIB_DIR_PREFIX vc)
+    endif()
+    if(BUILD_SHARED_LIBS)
+      find_path(wxWidgets_LIB_DIR
+        NAMES
+          msw/wx/setup.h
+          mswd/wx/setup.h
+          mswu/wx/setup.h
+          mswud/wx/setup.h
+          mswuniv/wx/setup.h
+          mswunivd/wx/setup.h
+          mswunivu/wx/setup.h
+          mswunivud/wx/setup.h
+        PATHS
+        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_dll   # prefer shared
+        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_lib
+        DOC "Path to wxWidgets libraries"
+        NO_DEFAULT_PATH
+        )
+    else()
+      find_path(wxWidgets_LIB_DIR
+        NAMES
+          msw/wx/setup.h
+          mswd/wx/setup.h
+          mswu/wx/setup.h
+          mswud/wx/setup.h
+          mswuniv/wx/setup.h
+          mswunivd/wx/setup.h
+          mswunivu/wx/setup.h
+          mswunivud/wx/setup.h
+        PATHS
+        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_lib   # prefer static
+        ${WX_ROOT_DIR}/lib/${WX_LIB_DIR_PREFIX}_dll
+        DOC "Path to wxWidgets libraries"
+        NO_DEFAULT_PATH
+        )
+    endif()
+
+    # If wxWidgets_LIB_DIR changed, clear all libraries.
+    if(NOT WX_LIB_DIR STREQUAL wxWidgets_LIB_DIR)
+      set(WX_LIB_DIR ${wxWidgets_LIB_DIR} CACHE INTERNAL "wxWidgets_LIB_DIR")
+      WX_CLEAR_ALL_DBG_LIBS()
+      WX_CLEAR_ALL_REL_LIBS()
+    endif()
+
+    if(WX_LIB_DIR)
+      # If building shared libs, define WXUSINGDLL to use dllimport.
+      if(WX_LIB_DIR MATCHES "[dD][lL][lL]")
+        set(wxWidgets_DEFINITIONS WXUSINGDLL)
+        DBG_MSG_V("detected SHARED/DLL tree WX_LIB_DIR=${WX_LIB_DIR}")
+      endif()
+
+      # Search for available configuration types.
+      foreach(CFG mswunivud mswunivd mswud mswd mswunivu mswuniv mswu msw)
+        set(WX_${CFG}_FOUND FALSE)
+        if(EXISTS ${WX_LIB_DIR}/${CFG})
+          list(APPEND WX_CONFIGURATION_LIST ${CFG})
+          set(WX_${CFG}_FOUND TRUE)
+          set(WX_CONFIGURATION ${CFG})
+        endif()
+      endforeach()
+      DBG_MSG_V("WX_CONFIGURATION_LIST=${WX_CONFIGURATION_LIST}")
+
+      if(WX_CONFIGURATION)
+        set(wxWidgets_FOUND TRUE)
+
+        # If the selected configuration wasn't found force the default
+        # one. Otherwise, use it but still force a refresh for
+        # updating the doc string with the current list of available
+        # configurations.
+        if(NOT WX_${wxWidgets_CONFIGURATION}_FOUND)
+          set(wxWidgets_CONFIGURATION ${WX_CONFIGURATION} CACHE STRING
+            "Set wxWidgets configuration (${WX_CONFIGURATION_LIST})" FORCE)
+        else()
+          set(wxWidgets_CONFIGURATION ${wxWidgets_CONFIGURATION} CACHE STRING
+            "Set wxWidgets configuration (${WX_CONFIGURATION_LIST})" FORCE)
+        endif()
+
+        # If release config selected, and both release/debug exist.
+        if(WX_${wxWidgets_CONFIGURATION}d_FOUND)
+          option(wxWidgets_USE_REL_AND_DBG
+            "Use release and debug configurations?" TRUE)
+          set(WX_USE_REL_AND_DBG ${wxWidgets_USE_REL_AND_DBG})
+        else()
+          # If the option exists (already in cache), force it false.
+          if(wxWidgets_USE_REL_AND_DBG)
+            set(wxWidgets_USE_REL_AND_DBG FALSE CACHE BOOL
+              "No ${wxWidgets_CONFIGURATION}d found." FORCE)
+          endif()
+          set(WX_USE_REL_AND_DBG FALSE)
+        endif()
+
+        # Get configuration parameters from the name.
+        WX_GET_NAME_COMPONENTS(${wxWidgets_CONFIGURATION} UNV UCD DBG)
+
+        # Set wxWidgets lib setup include directory.
+        if(EXISTS ${WX_LIB_DIR}/${wxWidgets_CONFIGURATION}/wx/setup.h)
+          set(wxWidgets_INCLUDE_DIRS
+            ${WX_LIB_DIR}/${wxWidgets_CONFIGURATION})
+        else()
+          DBG_MSG("wxWidgets_FOUND FALSE because ${WX_LIB_DIR}/${wxWidgets_CONFIGURATION}/wx/setup.h does not exists.")
+          set(wxWidgets_FOUND FALSE)
+        endif()
+
+        # Set wxWidgets main include directory.
+        if(EXISTS ${WX_ROOT_DIR}/include/wx/wx.h)
+          list(APPEND wxWidgets_INCLUDE_DIRS ${WX_ROOT_DIR}/include)
+        else()
+          DBG_MSG("wxWidgets_FOUND FALSE because WX_ROOT_DIR=${WX_ROOT_DIR} has no ${WX_ROOT_DIR}/include/wx/wx.h")
+          set(wxWidgets_FOUND FALSE)
+        endif()
+
+        # Find wxWidgets libraries.
+        WX_FIND_LIBS("${UNV}" "${UCD}" "${DBG}")
+        if(WX_USE_REL_AND_DBG)
+          WX_FIND_LIBS("${UNV}" "${UCD}" "d")
+        endif()
+
+        # Settings for requested libs (i.e., include dir, libraries, etc.).
+        WX_SET_LIBRARIES(wxWidgets_FIND_COMPONENTS "${DBG}")
+
+        # Add necessary definitions for unicode builds
+        if("${UCD}" STREQUAL "u")
+          list(APPEND wxWidgets_DEFINITIONS UNICODE _UNICODE)
+        endif()
+
+        # Add necessary definitions for debug builds
+        set(wxWidgets_DEFINITIONS_DEBUG _DEBUG __WXDEBUG__)
+
+      endif()
+    endif()
+  endif()
+
+#=====================================================================
+# UNIX_FIND_STYLE
+#=====================================================================
+else()
+  if(wxWidgets_FIND_STYLE STREQUAL "unix")
+    #-----------------------------------------------------------------
+    # UNIX: Helper MACROS
+    #-----------------------------------------------------------------
+    #
+    # Set the default values based on "wx-config --selected-config".
+    #
+    macro(WX_CONFIG_SELECT_GET_DEFAULT)
+      execute_process(
+        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
+          ${wxWidgets_CONFIG_OPTIONS} --selected-config
+        OUTPUT_VARIABLE _wx_selected_config
+        RESULT_VARIABLE _wx_result
+        ERROR_QUIET
+        )
+      if(_wx_result EQUAL 0)
+        foreach(_opt_name debug static unicode universal)
+          string(TOUPPER ${_opt_name} _upper_opt_name)
+          if(_wx_selected_config MATCHES "${_opt_name}")
+            set(wxWidgets_DEFAULT_${_upper_opt_name} ON)
+          else()
+            set(wxWidgets_DEFAULT_${_upper_opt_name} OFF)
+          endif()
+        endforeach()
+      else()
+        foreach(_upper_opt_name DEBUG STATIC UNICODE UNIVERSAL)
+          set(wxWidgets_DEFAULT_${_upper_opt_name} OFF)
+        endforeach()
+      endif()
+    endmacro()
+
+    #
+    # Query a boolean configuration option to determine if the system
+    # has both builds available. If so, provide the selection option
+    # to the user.
+    #
+    macro(WX_CONFIG_SELECT_QUERY_BOOL _OPT_NAME _OPT_HELP)
+      execute_process(
+        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
+          ${wxWidgets_CONFIG_OPTIONS} --${_OPT_NAME}=yes
+        RESULT_VARIABLE _wx_result_yes
+        OUTPUT_QUIET
+        ERROR_QUIET
+        )
+      execute_process(
+        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
+          ${wxWidgets_CONFIG_OPTIONS} --${_OPT_NAME}=no
+        RESULT_VARIABLE _wx_result_no
+        OUTPUT_QUIET
+        ERROR_QUIET
+        )
+      string(TOUPPER ${_OPT_NAME} _UPPER_OPT_NAME)
+      if(_wx_result_yes EQUAL 0 AND _wx_result_no EQUAL 0)
+        option(wxWidgets_USE_${_UPPER_OPT_NAME}
+          ${_OPT_HELP} ${wxWidgets_DEFAULT_${_UPPER_OPT_NAME}})
+      else()
+        # If option exists (already in cache), force to available one.
+        if(DEFINED wxWidgets_USE_${_UPPER_OPT_NAME})
+          if(_wx_result_yes EQUAL 0)
+            set(wxWidgets_USE_${_UPPER_OPT_NAME} ON  CACHE BOOL ${_OPT_HELP} FORCE)
+          else()
+            set(wxWidgets_USE_${_UPPER_OPT_NAME} OFF CACHE BOOL ${_OPT_HELP} FORCE)
+          endif()
+        endif()
+      endif()
+    endmacro()
+
+    #
+    # Set wxWidgets_SELECT_OPTIONS to wx-config options for selecting
+    # among multiple builds.
+    #
+    macro(WX_CONFIG_SELECT_SET_OPTIONS)
+      set(wxWidgets_SELECT_OPTIONS ${wxWidgets_CONFIG_OPTIONS})
+      foreach(_opt_name debug static unicode universal)
+        string(TOUPPER ${_opt_name} _upper_opt_name)
+        if(DEFINED wxWidgets_USE_${_upper_opt_name})
+          if(wxWidgets_USE_${_upper_opt_name})
+            list(APPEND wxWidgets_SELECT_OPTIONS --${_opt_name}=yes)
+          else()
+            list(APPEND wxWidgets_SELECT_OPTIONS --${_opt_name}=no)
+          endif()
+        endif()
+      endforeach()
+    endmacro()
+
+    #-----------------------------------------------------------------
+    # UNIX: Start actual work.
+    #-----------------------------------------------------------------
+    # Support cross-compiling, only search in the target platform.
+    find_program(wxWidgets_CONFIG_EXECUTABLE
+      NAMES wx-config wx-config-3.1 wx-config-3.0 wx-config-2.9 wx-config-2.8
+      DOC "Location of wxWidgets library configuration provider binary (wx-config)."
+      ONLY_CMAKE_FIND_ROOT_PATH
+      )
+
+    if(wxWidgets_CONFIG_EXECUTABLE)
+      set(wxWidgets_FOUND TRUE)
+
+      # get defaults based on "wx-config --selected-config"
+      WX_CONFIG_SELECT_GET_DEFAULT()
+
+      # for each option: if both builds are available, provide option
+      WX_CONFIG_SELECT_QUERY_BOOL(debug "Use debug build?")
+      WX_CONFIG_SELECT_QUERY_BOOL(unicode "Use unicode build?")
+      WX_CONFIG_SELECT_QUERY_BOOL(universal "Use universal build?")
+      WX_CONFIG_SELECT_QUERY_BOOL(static "Link libraries statically?")
+
+      # process selection to set wxWidgets_SELECT_OPTIONS
+      WX_CONFIG_SELECT_SET_OPTIONS()
+      DBG_MSG("wxWidgets_SELECT_OPTIONS=${wxWidgets_SELECT_OPTIONS}")
+
+      # run the wx-config program to get cxxflags
+      execute_process(
+        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
+          ${wxWidgets_SELECT_OPTIONS} --cxxflags
+        OUTPUT_VARIABLE wxWidgets_CXX_FLAGS
+        RESULT_VARIABLE RET
+        ERROR_QUIET
+        )
+      if(RET EQUAL 0)
+        string(STRIP "${wxWidgets_CXX_FLAGS}" wxWidgets_CXX_FLAGS)
+        separate_arguments(wxWidgets_CXX_FLAGS)
+
+        DBG_MSG_V("wxWidgets_CXX_FLAGS=${wxWidgets_CXX_FLAGS}")
+
+        # parse definitions from cxxflags;
+        #   drop -D* from CXXFLAGS and the -D prefix
+        string(REGEX MATCHALL "-D[^;]+"
+          wxWidgets_DEFINITIONS  "${wxWidgets_CXX_FLAGS}")
+        string(REGEX REPLACE "-D[^;]+(;|$)" ""
+          wxWidgets_CXX_FLAGS "${wxWidgets_CXX_FLAGS}")
+        string(REGEX REPLACE ";$" ""
+          wxWidgets_CXX_FLAGS "${wxWidgets_CXX_FLAGS}")
+        string(REPLACE "-D" ""
+          wxWidgets_DEFINITIONS "${wxWidgets_DEFINITIONS}")
+
+        # parse include dirs from cxxflags; drop -I prefix
+        string(REGEX MATCHALL "-I[^;]+"
+          wxWidgets_INCLUDE_DIRS "${wxWidgets_CXX_FLAGS}")
+        string(REGEX REPLACE "-I[^;]+;" ""
+          wxWidgets_CXX_FLAGS "${wxWidgets_CXX_FLAGS}")
+        string(REPLACE "-I" ""
+          wxWidgets_INCLUDE_DIRS "${wxWidgets_INCLUDE_DIRS}")
+
+        DBG_MSG_V("wxWidgets_DEFINITIONS=${wxWidgets_DEFINITIONS}")
+        DBG_MSG_V("wxWidgets_INCLUDE_DIRS=${wxWidgets_INCLUDE_DIRS}")
+        DBG_MSG_V("wxWidgets_CXX_FLAGS=${wxWidgets_CXX_FLAGS}")
+
+      else()
+        set(wxWidgets_FOUND FALSE)
+        DBG_MSG_V(
+          "${wxWidgets_CONFIG_EXECUTABLE} --cxxflags FAILED with RET=${RET}")
+      endif()
+
+      # run the wx-config program to get the libs
+      # - NOTE: wx-config doesn't verify that the libs requested exist
+      #         it just produces the names. Maybe a TRY_COMPILE would
+      #         be useful here...
+      string(REPLACE ";" ","
+        wxWidgets_FIND_COMPONENTS "${wxWidgets_FIND_COMPONENTS}")
+      execute_process(
+        COMMAND sh "${wxWidgets_CONFIG_EXECUTABLE}"
+          ${wxWidgets_SELECT_OPTIONS} --libs ${wxWidgets_FIND_COMPONENTS}
+        OUTPUT_VARIABLE wxWidgets_LIBRARIES
+        RESULT_VARIABLE RET
+        ERROR_QUIET
+        )
+      if(RET EQUAL 0)
+        string(STRIP "${wxWidgets_LIBRARIES}" wxWidgets_LIBRARIES)
+        separate_arguments(wxWidgets_LIBRARIES)
+        string(REPLACE "-framework;" "-framework "
+          wxWidgets_LIBRARIES "${wxWidgets_LIBRARIES}")
+        string(REPLACE "-arch;" "-arch "
+          wxWidgets_LIBRARIES "${wxWidgets_LIBRARIES}")
+        string(REPLACE "-isysroot;" "-isysroot "
+          wxWidgets_LIBRARIES "${wxWidgets_LIBRARIES}")
+
+        # extract linkdirs (-L) for rpath (i.e., LINK_DIRECTORIES)
+        string(REGEX MATCHALL "-L[^;]+"
+          wxWidgets_LIBRARY_DIRS "${wxWidgets_LIBRARIES}")
+        string(REPLACE "-L" ""
+          wxWidgets_LIBRARY_DIRS "${wxWidgets_LIBRARY_DIRS}")
+
+        DBG_MSG_V("wxWidgets_LIBRARIES=${wxWidgets_LIBRARIES}")
+        DBG_MSG_V("wxWidgets_LIBRARY_DIRS=${wxWidgets_LIBRARY_DIRS}")
+
+      else()
+        set(wxWidgets_FOUND FALSE)
+        DBG_MSG("${wxWidgets_CONFIG_EXECUTABLE} --libs ${wxWidgets_FIND_COMPONENTS} FAILED with RET=${RET}")
+      endif()
+    endif()
+
+    # When using wx-config in MSYS, the include paths are UNIX style paths which may or may
+    # not work correctly depending on you MSYS/MinGW configuration.  CMake expects native
+    # paths internally.
+    if(wxWidgets_FOUND AND MSYS)
+      find_program(_cygpath_exe cygpath ONLY_CMAKE_FIND_ROOT_PATH)
+      DBG_MSG_V("_cygpath_exe:  ${_cygpath_exe}")
+      if(_cygpath_exe)
+        set(_tmp_path "")
+        foreach(_path ${wxWidgets_INCLUDE_DIRS})
+          execute_process(
+            COMMAND cygpath -w ${_path}
+            OUTPUT_VARIABLE _native_path
+            RESULT_VARIABLE _retv
+            OUTPUT_STRIP_TRAILING_WHITESPACE
+            ERROR_QUIET
+            )
+          if(_retv EQUAL 0)
+            file(TO_CMAKE_PATH ${_native_path} _native_path)
+            DBG_MSG_V("Path ${_path} converted to ${_native_path}")
+            set(_tmp_path "${_tmp_path} ${_native_path}")
+          endif()
+        endforeach()
+        DBG_MSG("Setting wxWidgets_INCLUDE_DIRS = ${_tmp_path}")
+        set(wxWidgets_INCLUDE_DIRS ${_tmp_path})
+        separate_arguments(wxWidgets_INCLUDE_DIRS)
+        list(REMOVE_ITEM wxWidgets_INCLUDE_DIRS "")
+      endif()
+      unset(_cygpath_exe CACHE)
+    endif()
+
+#=====================================================================
+# Neither UNIX_FIND_STYLE, nor WIN32_FIND_STYLE
+#=====================================================================
+  else()
+    if(NOT wxWidgets_FIND_QUIETLY)
+      message(STATUS
+        "${CMAKE_CURRENT_LIST_FILE}(${CMAKE_CURRENT_LIST_LINE}): \n"
+        "  Platform unknown/unsupported. It's neither WIN32 nor UNIX "
+        "find style."
+        )
+    endif()
+  endif()
+endif()
+
+# Check if a specfic version was requested by find_package().
+if(wxWidgets_FOUND)
+  find_file(_filename wx/version.h PATHS ${wxWidgets_INCLUDE_DIRS} NO_DEFAULT_PATH)
+  dbg_msg("_filename:  ${_filename}")
+
+  if(NOT _filename)
+    message(FATAL_ERROR "wxWidgets wx/version.h file not found in ${wxWidgets_INCLUDE_DIRS}.")
+  endif()
+
+  file(READ ${_filename} _wx_version_h)
+
+  string(REGEX REPLACE "^(.*\n)?#define +wxMAJOR_VERSION +([0-9]+).*"
+    "\\2" wxWidgets_VERSION_MAJOR "${_wx_version_h}" )
+  string(REGEX REPLACE "^(.*\n)?#define +wxMINOR_VERSION +([0-9]+).*"
+    "\\2" wxWidgets_VERSION_MINOR "${_wx_version_h}" )
+  string(REGEX REPLACE "^(.*\n)?#define +wxRELEASE_NUMBER +([0-9]+).*"
+    "\\2" wxWidgets_VERSION_PATCH "${_wx_version_h}" )
+  set(wxWidgets_VERSION_STRING
+    "${wxWidgets_VERSION_MAJOR}.${wxWidgets_VERSION_MINOR}.${wxWidgets_VERSION_PATCH}" )
+  dbg_msg("wxWidgets_VERSION_STRING:    ${wxWidgets_VERSION_STRING}")
+endif()
+
+# Debug output:
+DBG_MSG("wxWidgets_FOUND           : ${wxWidgets_FOUND}")
+DBG_MSG("wxWidgets_INCLUDE_DIRS    : ${wxWidgets_INCLUDE_DIRS}")
+DBG_MSG("wxWidgets_LIBRARY_DIRS    : ${wxWidgets_LIBRARY_DIRS}")
+DBG_MSG("wxWidgets_LIBRARIES       : ${wxWidgets_LIBRARIES}")
+DBG_MSG("wxWidgets_CXX_FLAGS       : ${wxWidgets_CXX_FLAGS}")
+DBG_MSG("wxWidgets_USE_FILE        : ${wxWidgets_USE_FILE}")
+
+#=====================================================================
+#=====================================================================
+
+include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
+
+find_package_handle_standard_args(wxWidgets
+  REQUIRED_VARS wxWidgets_LIBRARIES wxWidgets_INCLUDE_DIRS
+  VERSION_VAR   wxWidgets_VERSION_STRING
+  )
+
+#=====================================================================
+# Macros for use in wxWidgets apps.
+# - This module will not fail to find wxWidgets based on the code
+#   below. Hence, it's required to check for validity of:
+#
+# wxWidgets_wxrc_EXECUTABLE
+#=====================================================================
+
+# Resource file compiler.
+find_program(wxWidgets_wxrc_EXECUTABLE wxrc
+  ${wxWidgets_ROOT_DIR}/utils/wxrc/vc_msw
+  DOC "Location of wxWidgets resource file compiler binary (wxrc)"
+  )
+
+#
+# WX_SPLIT_ARGUMENTS_ON(<keyword> <left> <right> <arg1> <arg2> ...)
+#
+# Sets <left> and <right> to contain arguments to the left and right,
+# respectively, of <keyword>.
+#
+# Example usage:
+#  function(WXWIDGETS_ADD_RESOURCES outfiles)
+#    WX_SPLIT_ARGUMENTS_ON(OPTIONS wxrc_files wxrc_options ${ARGN})
+#    ...
+#  endfunction()
+#
+#  WXWIDGETS_ADD_RESOURCES(sources ${xrc_files} OPTIONS -e -o file.C)
+#
+# NOTE: This is a generic piece of code that should be renamed to
+# SPLIT_ARGUMENTS_ON and put in a file serving the same purpose as
+# FindPackageStandardArgs.cmake. At the time of this writing
+# FindQt4.cmake has a QT4_EXTRACT_OPTIONS, which I basically copied
+# here a bit more generalized. So, there are already two find modules
+# using this approach.
+#
+function(WX_SPLIT_ARGUMENTS_ON _keyword _leftvar _rightvar)
+  # FIXME: Document that the input variables will be cleared.
+  #list(APPEND ${_leftvar}  "")
+  #list(APPEND ${_rightvar} "")
+  set(${_leftvar}  "")
+  set(${_rightvar} "")
+
+  set(_doing_right FALSE)
+  foreach(element ${ARGN})
+    if("${element}" STREQUAL "${_keyword}")
+      set(_doing_right TRUE)
+    else()
+      if(_doing_right)
+        list(APPEND ${_rightvar} "${element}")
+      else()
+        list(APPEND ${_leftvar} "${element}")
+      endif()
+    endif()
+  endforeach()
+
+  set(${_leftvar}  ${${_leftvar}}  PARENT_SCOPE)
+  set(${_rightvar} ${${_rightvar}} PARENT_SCOPE)
+endfunction()
+
+#
+# WX_GET_DEPENDENCIES_FROM_XML(
+#   <depends>
+#   <match_pattern>
+#   <clean_pattern>
+#   <xml_contents>
+#   <depends_path>
+#   )
+#
+# FIXME: Add documentation here...
+#
+function(WX_GET_DEPENDENCIES_FROM_XML
+    _depends
+    _match_patt
+    _clean_patt
+    _xml_contents
+    _depends_path
+    )
+
+  string(REGEX MATCHALL
+    ${_match_patt}
+    dep_file_list
+    "${${_xml_contents}}"
+    )
+  foreach(dep_file ${dep_file_list})
+    string(REGEX REPLACE ${_clean_patt} "" dep_file "${dep_file}")
+
+    # make the file have an absolute path
+    if(NOT IS_ABSOLUTE "${dep_file}")
+      set(dep_file "${${_depends_path}}/${dep_file}")
+    endif()
+
+    # append file to dependency list
+    list(APPEND ${_depends} "${dep_file}")
+  endforeach()
+
+  set(${_depends} ${${_depends}} PARENT_SCOPE)
+endfunction()
+
+#
+# WXWIDGETS_ADD_RESOURCES(<sources> <xrc_files>
+#                         OPTIONS <options> [NO_CPP_CODE])
+#
+# Adds a custom command for resource file compilation of the
+# <xrc_files> and appends the output files to <sources>.
+#
+# Example usages:
+#   WXWIDGETS_ADD_RESOURCES(sources xrc/main_frame.xrc)
+#   WXWIDGETS_ADD_RESOURCES(sources ${xrc_files} OPTIONS -e -o altname.cxx)
+#
+function(WXWIDGETS_ADD_RESOURCES _outfiles)
+  WX_SPLIT_ARGUMENTS_ON(OPTIONS rc_file_list rc_options ${ARGN})
+
+  # Parse files for dependencies.
+  set(rc_file_list_abs "")
+  set(rc_depends       "")
+  foreach(rc_file ${rc_file_list})
+    get_filename_component(depends_path ${rc_file} PATH)
+
+    get_filename_component(rc_file_abs ${rc_file} ABSOLUTE)
+    list(APPEND rc_file_list_abs "${rc_file_abs}")
+
+    # All files have absolute paths or paths relative to the location
+    # of the rc file.
+    file(READ "${rc_file_abs}" rc_file_contents)
+
+    # get bitmap/bitmap2 files
+    WX_GET_DEPENDENCIES_FROM_XML(
+      rc_depends
+      "<bitmap[^<]+"
+      "^<bitmap[^>]*>"
+      rc_file_contents
+      depends_path
+      )
+
+    # get url files
+    WX_GET_DEPENDENCIES_FROM_XML(
+      rc_depends
+      "<url[^<]+"
+      "^<url[^>]*>"
+      rc_file_contents
+      depends_path
+      )
+
+    # get wxIcon files
+    WX_GET_DEPENDENCIES_FROM_XML(
+      rc_depends
+      "<object[^>]*class=\"wxIcon\"[^<]+"
+      "^<object[^>]*>"
+      rc_file_contents
+      depends_path
+      )
+  endforeach()
+
+  #
+  # Parse options.
+  #
+  # If NO_CPP_CODE option specified, then produce .xrs file rather
+  # than a .cpp file (i.e., don't add the default --cpp-code option).
+  list(FIND rc_options NO_CPP_CODE index)
+  if(index EQUAL -1)
+    list(APPEND rc_options --cpp-code)
+    # wxrc's default output filename for cpp code.
+    set(outfile resource.cpp)
+  else()
+    list(REMOVE_AT rc_options ${index})
+    # wxrc's default output filename for xrs file.
+    set(outfile resource.xrs)
+  endif()
+
+  # Get output name for use in ADD_CUSTOM_COMMAND.
+  # - short option scanning
+  list(FIND rc_options -o index)
+  if(NOT index EQUAL -1)
+    math(EXPR filename_index "${index} + 1")
+    list(GET rc_options ${filename_index} outfile)
+    #list(REMOVE_AT rc_options ${index} ${filename_index})
+  endif()
+  # - long option scanning
+  string(REGEX MATCH "--output=[^;]*" outfile_opt "${rc_options}")
+  if(outfile_opt)
+    string(REPLACE "--output=" "" outfile "${outfile_opt}")
+  endif()
+  #string(REGEX REPLACE "--output=[^;]*;?" "" rc_options "${rc_options}")
+  #string(REGEX REPLACE ";$" "" rc_options "${rc_options}")
+
+  if(NOT IS_ABSOLUTE "${outfile}")
+    set(outfile "${CMAKE_CURRENT_BINARY_DIR}/${outfile}")
+  endif()
+  add_custom_command(
+    OUTPUT "${outfile}"
+    COMMAND ${wxWidgets_wxrc_EXECUTABLE} ${rc_options} ${rc_file_list_abs}
+    DEPENDS ${rc_file_list_abs} ${rc_depends}
+    )
+
+  # Add generated header to output file list.
+  list(FIND rc_options -e short_index)
+  list(FIND rc_options --extra-cpp-code long_index)
+  if(NOT short_index EQUAL -1 OR NOT long_index EQUAL -1)
+    get_filename_component(outfile_ext ${outfile} EXT)
+    string(REPLACE "${outfile_ext}" ".h" outfile_header "${outfile}")
+    list(APPEND ${_outfiles} "${outfile_header}")
+    set_source_files_properties(
+      "${outfile_header}" PROPERTIES GENERATED TRUE
+      )
+  endif()
+
+  # Add generated file to output file list.
+  list(APPEND ${_outfiles} "${outfile}")
+
+  set(${_outfiles} ${${_outfiles}} PARENT_SCOPE)
+endfunction()
diff --git a/share/cmake-3.2/Modules/FindwxWindows.cmake b/share/cmake-3.6/Modules/FindwxWindows.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FindwxWindows.cmake
rename to share/cmake-3.6/Modules/FindwxWindows.cmake
diff --git a/share/cmake-3.6/Modules/FortranCInterface.cmake b/share/cmake-3.6/Modules/FortranCInterface.cmake
new file mode 100644
index 0000000..c12dd4c
--- /dev/null
+++ b/share/cmake-3.6/Modules/FortranCInterface.cmake
@@ -0,0 +1,401 @@
+#[=======================================================================[.rst:
+FortranCInterface
+-----------------
+
+Fortran/C Interface Detection
+
+This module automatically detects the API by which C and Fortran
+languages interact.
+
+Module Variables
+^^^^^^^^^^^^^^^^
+
+Variables that indicate if the mangling is found:
+
+``FortranCInterface_GLOBAL_FOUND``
+  Global subroutines and functions.
+
+``FortranCInterface_MODULE_FOUND``
+  Module subroutines and functions (declared by "MODULE PROCEDURE").
+
+This module also provides the following variables to specify
+the detected mangling, though a typical use case does not need
+to reference them and can use the `Module Functions`_ below.
+
+``FortranCInterface_GLOBAL_PREFIX``
+  Prefix for a global symbol without an underscore.
+
+``FortranCInterface_GLOBAL_SUFFIX``
+  Suffix for a global symbol without an underscore.
+
+``FortranCInterface_GLOBAL_CASE``
+  The case for a global symbol without an underscore,
+  either ``UPPER`` or ``LOWER``.
+
+``FortranCInterface_GLOBAL__PREFIX``
+  Prefix for a global symbol with an underscore.
+
+``FortranCInterface_GLOBAL__SUFFIX``
+  Suffix for a global symbol with an underscore.
+
+``FortranCInterface_GLOBAL__CASE``
+  The case for a global symbol with an underscore,
+  either ``UPPER`` or ``LOWER``.
+
+``FortranCInterface_MODULE_PREFIX``
+  Prefix for a module symbol without an underscore.
+
+``FortranCInterface_MODULE_MIDDLE``
+  Middle of a module symbol without an underscore that appears
+  between the name of the module and the name of the symbol.
+
+``FortranCInterface_MODULE_SUFFIX``
+  Suffix for a module symbol without an underscore.
+
+``FortranCInterface_MODULE_CASE``
+  The case for a module symbol without an underscore,
+  either ``UPPER`` or ``LOWER``.
+
+``FortranCInterface_MODULE__PREFIX``
+  Prefix for a module symbol with an underscore.
+
+``FortranCInterface_MODULE__MIDDLE``
+  Middle of a module symbol with an underscore that appears
+  between the name of the module and the name of the symbol.
+
+``FortranCInterface_MODULE__SUFFIX``
+  Suffix for a module symbol with an underscore.
+
+``FortranCInterface_MODULE__CASE``
+  The case for a module symbol with an underscore,
+  either ``UPPER`` or ``LOWER``.
+
+Module Functions
+^^^^^^^^^^^^^^^^
+
+.. command:: FortranCInterface_HEADER
+
+  The ``FortranCInterface_HEADER`` function is provided to generate a
+  C header file containing macros to mangle symbol names::
+
+    FortranCInterface_HEADER(<file>
+                             [MACRO_NAMESPACE <macro-ns>]
+                             [SYMBOL_NAMESPACE <ns>]
+                             [SYMBOLS [<module>:]<function> ...])
+
+  It generates in ``<file>`` definitions of the following macros::
+
+     #define FortranCInterface_GLOBAL (name,NAME) ...
+     #define FortranCInterface_GLOBAL_(name,NAME) ...
+     #define FortranCInterface_MODULE (mod,name, MOD,NAME) ...
+     #define FortranCInterface_MODULE_(mod,name, MOD,NAME) ...
+
+  These macros mangle four categories of Fortran symbols, respectively:
+
+  * Global symbols without '_': ``call mysub()``
+  * Global symbols with '_'   : ``call my_sub()``
+  * Module symbols without '_': ``use mymod; call mysub()``
+  * Module symbols with '_'   : ``use mymod; call my_sub()``
+
+  If mangling for a category is not known, its macro is left undefined.
+  All macros require raw names in both lower case and upper case.
+
+  The options are:
+
+  ``MACRO_NAMESPACE``
+    Replace the default ``FortranCInterface_`` prefix with a given
+    namespace ``<macro-ns>``.
+
+  ``SYMBOLS``
+    List symbols to mangle automatically with C preprocessor definitions::
+
+      <function>          ==> #define <ns><function> ...
+      <module>:<function> ==> #define <ns><module>_<function> ...
+
+    If the mangling for some symbol is not known then no preprocessor
+    definition is created, and a warning is displayed.
+
+  ``SYMBOL_NAMESPACE``
+    Prefix all preprocessor definitions generated by the ``SYMBOLS``
+    option with a given namespace ``<ns>``.
+
+.. command:: FortranCInterface_VERIFY
+
+  The ``FortranCInterface_VERIFY`` function is provided to verify
+  that the Fortran and C/C++ compilers work together::
+
+    FortranCInterface_VERIFY([CXX] [QUIET])
+
+  It tests whether a simple test executable using Fortran and C (and C++
+  when the CXX option is given) compiles and links successfully.  The
+  result is stored in the cache entry ``FortranCInterface_VERIFIED_C``
+  (or ``FortranCInterface_VERIFIED_CXX`` if ``CXX`` is given) as a boolean.
+  If the check fails and ``QUIET`` is not given the function terminates with a
+  fatal error message describing the problem.  The purpose of this check
+  is to stop a build early for incompatible compiler combinations.  The
+  test is built in the ``Release`` configuration.
+
+Example Usage
+^^^^^^^^^^^^^
+
+.. code-block:: cmake
+
+   include(FortranCInterface)
+   FortranCInterface_HEADER(FC.h MACRO_NAMESPACE "FC_")
+
+This creates a "FC.h" header that defines mangling macros ``FC_GLOBAL()``,
+``FC_GLOBAL_()``, ``FC_MODULE()``, and ``FC_MODULE_()``.
+
+.. code-block:: cmake
+
+   include(FortranCInterface)
+   FortranCInterface_HEADER(FCMangle.h
+                            MACRO_NAMESPACE "FC_"
+                            SYMBOL_NAMESPACE "FC_"
+                            SYMBOLS mysub mymod:my_sub)
+
+This creates a "FCMangle.h" header that defines the same ``FC_*()``
+mangling macros as the previous example plus preprocessor symbols
+``FC_mysub`` and ``FC_mymod_my_sub``.
+
+Additional Manglings
+^^^^^^^^^^^^^^^^^^^^
+
+FortranCInterface is aware of possible ``GLOBAL`` and ``MODULE`` manglings
+for many Fortran compilers, but it also provides an interface to specify
+new possible manglings.  Set the variables::
+
+   FortranCInterface_GLOBAL_SYMBOLS
+   FortranCInterface_MODULE_SYMBOLS
+
+before including FortranCInterface to specify manglings of the symbols
+``MySub``, ``My_Sub``, ``MyModule:MySub``, and ``My_Module:My_Sub``.
+For example, the code:
+
+.. code-block:: cmake
+
+   set(FortranCInterface_GLOBAL_SYMBOLS mysub_ my_sub__ MYSUB_)
+     #                                  ^^^^^  ^^^^^^   ^^^^^
+   set(FortranCInterface_MODULE_SYMBOLS
+       __mymodule_MOD_mysub __my_module_MOD_my_sub)
+     #   ^^^^^^^^     ^^^^^   ^^^^^^^^^     ^^^^^^
+   include(FortranCInterface)
+
+tells FortranCInterface to try given ``GLOBAL`` and ``MODULE`` manglings.
+(The carets point at raw symbol names for clarity in this example but
+are not needed.)
+#]=======================================================================]
+
+#=============================================================================
+# Copyright 2008-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#-----------------------------------------------------------------------------
+# Execute at most once in a project.
+if(FortranCInterface_SOURCE_DIR)
+  return()
+endif()
+
+cmake_policy(PUSH)
+cmake_policy(SET CMP0007 NEW)
+
+#-----------------------------------------------------------------------------
+# Verify that C and Fortran are available.
+foreach(lang C Fortran)
+  if(NOT CMAKE_${lang}_COMPILER_LOADED)
+    message(FATAL_ERROR
+      "FortranCInterface requires the ${lang} language to be enabled.")
+  endif()
+endforeach()
+
+#-----------------------------------------------------------------------------
+set(FortranCInterface_SOURCE_DIR ${CMAKE_ROOT}/Modules/FortranCInterface)
+
+# MinGW's make tool does not always like () in the path
+if("${CMAKE_GENERATOR}" MATCHES "MinGW" AND
+    "${FortranCInterface_SOURCE_DIR}" MATCHES "[()]")
+  file(COPY ${FortranCInterface_SOURCE_DIR}/
+    DESTINATION ${CMAKE_BINARY_DIR}/CMakeFiles/FortranCInterfaceMinGW)
+  set(FortranCInterface_SOURCE_DIR ${CMAKE_BINARY_DIR}/CMakeFiles/FortranCInterfaceMinGW)
+endif()
+
+# Create the interface detection project if it does not exist.
+if(NOT FortranCInterface_BINARY_DIR)
+  set(FortranCInterface_BINARY_DIR ${CMAKE_BINARY_DIR}/CMakeFiles/FortranCInterface)
+  include(${FortranCInterface_SOURCE_DIR}/Detect.cmake)
+endif()
+
+# Load the detection results.
+include(${FortranCInterface_BINARY_DIR}/Output.cmake)
+
+#-----------------------------------------------------------------------------
+function(FortranCInterface_HEADER file)
+  # Parse arguments.
+  if(IS_ABSOLUTE "${file}")
+    set(FILE "${file}")
+  else()
+    set(FILE "${CMAKE_CURRENT_BINARY_DIR}/${file}")
+  endif()
+  set(MACRO_NAMESPACE "FortranCInterface_")
+  set(SYMBOL_NAMESPACE)
+  set(SYMBOLS)
+  set(doing)
+  foreach(arg ${ARGN})
+    if("x${arg}" MATCHES "^x(SYMBOLS|SYMBOL_NAMESPACE|MACRO_NAMESPACE)$")
+      set(doing "${arg}")
+    elseif("x${doing}" MATCHES "^x(SYMBOLS)$")
+      list(APPEND "${doing}" "${arg}")
+    elseif("x${doing}" MATCHES "^x(SYMBOL_NAMESPACE|MACRO_NAMESPACE)$")
+      set("${doing}" "${arg}")
+      set(doing)
+    else()
+      message(AUTHOR_WARNING "Unknown argument: \"${arg}\"")
+    endif()
+  endforeach()
+
+  # Generate macro definitions.
+  set(HEADER_CONTENT)
+  set(_desc_GLOBAL  "/* Mangling for Fortran global symbols without underscores. */")
+  set(_desc_GLOBAL_ "/* Mangling for Fortran global symbols with underscores. */")
+  set(_desc_MODULE  "/* Mangling for Fortran module symbols without underscores. */")
+  set(_desc_MODULE_ "/* Mangling for Fortran module symbols with underscores. */")
+  foreach(macro GLOBAL GLOBAL_ MODULE MODULE_)
+    if(FortranCInterface_${macro}_MACRO)
+      set(HEADER_CONTENT "${HEADER_CONTENT}
+${_desc_${macro}}
+#define ${MACRO_NAMESPACE}${macro}${FortranCInterface_${macro}_MACRO}
+")
+    endif()
+  endforeach()
+
+  # Generate symbol mangling definitions.
+  if(SYMBOLS)
+    set(HEADER_CONTENT "${HEADER_CONTENT}
+/*--------------------------------------------------------------------------*/
+/* Mangle some symbols automatically.                                       */
+")
+  endif()
+  foreach(f ${SYMBOLS})
+    if("${f}" MATCHES ":")
+      # Module symbol name.  Parse "<module>:<function>" syntax.
+      string(REPLACE ":" ";" pieces "${f}")
+      list(GET pieces 0 module)
+      list(GET pieces 1 function)
+      string(TOUPPER "${module}" m_upper)
+      string(TOLOWER "${module}" m_lower)
+      string(TOUPPER "${function}" f_upper)
+      string(TOLOWER "${function}" f_lower)
+      if("${function}" MATCHES "_")
+        set(form "_")
+      else()
+        set(form "")
+      endif()
+      if(FortranCInterface_MODULE${form}_MACRO)
+        set(HEADER_CONTENT "${HEADER_CONTENT}#define ${SYMBOL_NAMESPACE}${module}_${function} ${MACRO_NAMESPACE}MODULE${form}(${m_lower},${f_lower}, ${m_upper},${f_upper})\n")
+      else()
+        message(AUTHOR_WARNING "No FortranCInterface mangling known for ${f}")
+      endif()
+    else()
+      # Global symbol name.
+      if("${f}" MATCHES "_")
+        set(form "_")
+      else()
+        set(form "")
+      endif()
+      string(TOUPPER "${f}" f_upper)
+      string(TOLOWER "${f}" f_lower)
+      if(FortranCInterface_GLOBAL${form}_MACRO)
+        set(HEADER_CONTENT "${HEADER_CONTENT}#define ${SYMBOL_NAMESPACE}${f} ${MACRO_NAMESPACE}GLOBAL${form}(${f_lower}, ${f_upper})\n")
+      else()
+        message(AUTHOR_WARNING "No FortranCInterface mangling known for ${f}")
+      endif()
+    endif()
+  endforeach()
+
+  # Store the content.
+  configure_file(${FortranCInterface_SOURCE_DIR}/Macro.h.in ${FILE} @ONLY)
+endfunction()
+
+function(FortranCInterface_VERIFY)
+  # Check arguments.
+
+  set(lang C)
+  set(quiet 0)
+  set(verify_cxx 0)
+  foreach(arg ${ARGN})
+    if("${arg}" STREQUAL "QUIET")
+      set(quiet 1)
+    elseif("${arg}" STREQUAL "CXX")
+      set(lang CXX)
+      set(verify_cxx 1)
+    else()
+      message(FATAL_ERROR
+        "FortranCInterface_VERIFY - called with unknown argument:\n  ${arg}")
+    endif()
+  endforeach()
+
+  if(NOT CMAKE_${lang}_COMPILER_LOADED)
+    message(FATAL_ERROR
+      "FortranCInterface_VERIFY(${lang}) requires ${lang} to be enabled.")
+  endif()
+
+  # Build the verification project if not yet built.
+  if(NOT DEFINED FortranCInterface_VERIFIED_${lang})
+    set(_desc "Verifying Fortran/${lang} Compiler Compatibility")
+    message(STATUS "${_desc}")
+
+    # Build a sample project which reports symbols.
+    set(CMAKE_TRY_COMPILE_CONFIGURATION Release)
+    try_compile(FortranCInterface_VERIFY_${lang}_COMPILED
+      ${FortranCInterface_BINARY_DIR}/Verify${lang}
+      ${FortranCInterface_SOURCE_DIR}/Verify
+      VerifyFortranC
+      CMAKE_FLAGS -DVERIFY_CXX=${verify_cxx}
+                  -DCMAKE_VERBOSE_MAKEFILE=ON
+                 "-DCMAKE_C_FLAGS:STRING=${CMAKE_C_FLAGS}"
+                 "-DCMAKE_CXX_FLAGS:STRING=${CMAKE_CXX_FLAGS}"
+                 "-DCMAKE_Fortran_FLAGS:STRING=${CMAKE_Fortran_FLAGS}"
+                 "-DCMAKE_C_FLAGS_RELEASE:STRING=${CMAKE_C_FLAGS_RELEASE}"
+                 "-DCMAKE_CXX_FLAGS_RELEASE:STRING=${CMAKE_CXX_FLAGS_RELEASE}"
+                 "-DCMAKE_Fortran_FLAGS_RELEASE:STRING=${CMAKE_Fortran_FLAGS_RELEASE}"
+      OUTPUT_VARIABLE _output)
+    file(WRITE "${FortranCInterface_BINARY_DIR}/Verify${lang}/output.txt" "${_output}")
+
+    # Report results.
+    if(FortranCInterface_VERIFY_${lang}_COMPILED)
+      message(STATUS "${_desc} - Success")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+        "${_desc} passed with the following output:\n${_output}\n\n")
+      set(FortranCInterface_VERIFIED_${lang} 1 CACHE INTERNAL "Fortran/${lang} compatibility")
+    else()
+      message(STATUS "${_desc} - Failed")
+      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+        "${_desc} failed with the following output:\n${_output}\n\n")
+      set(FortranCInterface_VERIFIED_${lang} 0 CACHE INTERNAL "Fortran/${lang} compatibility")
+    endif()
+    unset(FortranCInterface_VERIFY_${lang}_COMPILED CACHE)
+  endif()
+
+  # Error if compilers are incompatible.
+  if(NOT FortranCInterface_VERIFIED_${lang} AND NOT quiet)
+    file(READ "${FortranCInterface_BINARY_DIR}/Verify${lang}/output.txt" _output)
+    string(REPLACE "\n" "\n  " _output "${_output}")
+    message(FATAL_ERROR
+      "The Fortran compiler:\n  ${CMAKE_Fortran_COMPILER}\n"
+      "and the ${lang} compiler:\n  ${CMAKE_${lang}_COMPILER}\n"
+      "failed to compile a simple test project using both languages.  "
+      "The output was:\n  ${_output}")
+  endif()
+endfunction()
+
+# Restore including context policies.
+cmake_policy(POP)
diff --git a/share/cmake-3.2/Modules/FortranCInterface/CMakeLists.txt b/share/cmake-3.6/Modules/FortranCInterface/CMakeLists.txt
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/CMakeLists.txt
rename to share/cmake-3.6/Modules/FortranCInterface/CMakeLists.txt
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Detect.cmake b/share/cmake-3.6/Modules/FortranCInterface/Detect.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Detect.cmake
rename to share/cmake-3.6/Modules/FortranCInterface/Detect.cmake
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Input.cmake.in b/share/cmake-3.6/Modules/FortranCInterface/Input.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Input.cmake.in
rename to share/cmake-3.6/Modules/FortranCInterface/Input.cmake.in
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Macro.h.in b/share/cmake-3.6/Modules/FortranCInterface/Macro.h.in
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Macro.h.in
rename to share/cmake-3.6/Modules/FortranCInterface/Macro.h.in
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Output.cmake.in b/share/cmake-3.6/Modules/FortranCInterface/Output.cmake.in
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Output.cmake.in
rename to share/cmake-3.6/Modules/FortranCInterface/Output.cmake.in
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Verify/CMakeLists.txt b/share/cmake-3.6/Modules/FortranCInterface/Verify/CMakeLists.txt
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Verify/CMakeLists.txt
rename to share/cmake-3.6/Modules/FortranCInterface/Verify/CMakeLists.txt
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Verify/VerifyC.c b/share/cmake-3.6/Modules/FortranCInterface/Verify/VerifyC.c
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Verify/VerifyC.c
rename to share/cmake-3.6/Modules/FortranCInterface/Verify/VerifyC.c
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Verify/VerifyCXX.cxx b/share/cmake-3.6/Modules/FortranCInterface/Verify/VerifyCXX.cxx
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Verify/VerifyCXX.cxx
rename to share/cmake-3.6/Modules/FortranCInterface/Verify/VerifyCXX.cxx
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Verify/VerifyFortran.f b/share/cmake-3.6/Modules/FortranCInterface/Verify/VerifyFortran.f
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Verify/VerifyFortran.f
rename to share/cmake-3.6/Modules/FortranCInterface/Verify/VerifyFortran.f
diff --git a/share/cmake-3.2/Modules/FortranCInterface/Verify/main.c b/share/cmake-3.6/Modules/FortranCInterface/Verify/main.c
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/Verify/main.c
rename to share/cmake-3.6/Modules/FortranCInterface/Verify/main.c
diff --git a/share/cmake-3.2/Modules/FortranCInterface/call_mod.f90 b/share/cmake-3.6/Modules/FortranCInterface/call_mod.f90
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/call_mod.f90
rename to share/cmake-3.6/Modules/FortranCInterface/call_mod.f90
diff --git a/share/cmake-3.2/Modules/FortranCInterface/call_sub.f b/share/cmake-3.6/Modules/FortranCInterface/call_sub.f
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/call_sub.f
rename to share/cmake-3.6/Modules/FortranCInterface/call_sub.f
diff --git a/share/cmake-3.2/Modules/FortranCInterface/main.F b/share/cmake-3.6/Modules/FortranCInterface/main.F
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/main.F
rename to share/cmake-3.6/Modules/FortranCInterface/main.F
diff --git a/share/cmake-3.2/Modules/FortranCInterface/my_module.f90 b/share/cmake-3.6/Modules/FortranCInterface/my_module.f90
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/my_module.f90
rename to share/cmake-3.6/Modules/FortranCInterface/my_module.f90
diff --git a/share/cmake-3.6/Modules/FortranCInterface/my_module_.c b/share/cmake-3.6/Modules/FortranCInterface/my_module_.c
new file mode 100644
index 0000000..6fa89d1
--- /dev/null
+++ b/share/cmake-3.6/Modules/FortranCInterface/my_module_.c
@@ -0,0 +1,3 @@
+void my_module_(void)
+{
+}
diff --git a/share/cmake-3.2/Modules/FortranCInterface/my_sub.f b/share/cmake-3.6/Modules/FortranCInterface/my_sub.f
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/my_sub.f
rename to share/cmake-3.6/Modules/FortranCInterface/my_sub.f
diff --git a/share/cmake-3.2/Modules/FortranCInterface/mymodule.f90 b/share/cmake-3.6/Modules/FortranCInterface/mymodule.f90
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/mymodule.f90
rename to share/cmake-3.6/Modules/FortranCInterface/mymodule.f90
diff --git a/share/cmake-3.6/Modules/FortranCInterface/mymodule_.c b/share/cmake-3.6/Modules/FortranCInterface/mymodule_.c
new file mode 100644
index 0000000..444953b
--- /dev/null
+++ b/share/cmake-3.6/Modules/FortranCInterface/mymodule_.c
@@ -0,0 +1,3 @@
+void mymodule_(void)
+{
+}
diff --git a/share/cmake-3.2/Modules/FortranCInterface/mysub.f b/share/cmake-3.6/Modules/FortranCInterface/mysub.f
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/mysub.f
rename to share/cmake-3.6/Modules/FortranCInterface/mysub.f
diff --git a/share/cmake-3.2/Modules/FortranCInterface/symbol.c.in b/share/cmake-3.6/Modules/FortranCInterface/symbol.c.in
similarity index 100%
rename from share/cmake-3.2/Modules/FortranCInterface/symbol.c.in
rename to share/cmake-3.6/Modules/FortranCInterface/symbol.c.in
diff --git a/share/cmake-3.6/Modules/GNUInstallDirs.cmake b/share/cmake-3.6/Modules/GNUInstallDirs.cmake
new file mode 100644
index 0000000..b42084e
--- /dev/null
+++ b/share/cmake-3.6/Modules/GNUInstallDirs.cmake
@@ -0,0 +1,354 @@
+#.rst:
+# GNUInstallDirs
+# --------------
+#
+# Define GNU standard installation directories
+#
+# Provides install directory variables as defined by the
+# `GNU Coding Standards`_.
+#
+# .. _`GNU Coding Standards`: https://www.gnu.org/prep/standards/html_node/Directory-Variables.html
+#
+# Result Variables
+# ^^^^^^^^^^^^^^^^
+#
+# Inclusion of this module defines the following variables:
+#
+# ``CMAKE_INSTALL_<dir>``
+#
+#   Destination for files of a given type.  This value may be passed to
+#   the ``DESTINATION`` options of :command:`install` commands for the
+#   corresponding file type.
+#
+# ``CMAKE_INSTALL_FULL_<dir>``
+#
+#   The absolute path generated from the corresponding ``CMAKE_INSTALL_<dir>``
+#   value.  If the value is not already an absolute path, an absolute path
+#   is constructed typically by prepending the value of the
+#   :variable:`CMAKE_INSTALL_PREFIX` variable.  However, there are some
+#   `special cases`_ as documented below.
+#
+# where ``<dir>`` is one of:
+#
+# ``BINDIR``
+#   user executables (``bin``)
+# ``SBINDIR``
+#   system admin executables (``sbin``)
+# ``LIBEXECDIR``
+#   program executables (``libexec``)
+# ``SYSCONFDIR``
+#   read-only single-machine data (``etc``)
+# ``SHAREDSTATEDIR``
+#   modifiable architecture-independent data (``com``)
+# ``LOCALSTATEDIR``
+#   modifiable single-machine data (``var``)
+# ``LIBDIR``
+#   object code libraries (``lib`` or ``lib64``
+#   or ``lib/<multiarch-tuple>`` on Debian)
+# ``INCLUDEDIR``
+#   C header files (``include``)
+# ``OLDINCLUDEDIR``
+#   C header files for non-gcc (``/usr/include``)
+# ``DATAROOTDIR``
+#   read-only architecture-independent data root (``share``)
+# ``DATADIR``
+#   read-only architecture-independent data (``DATAROOTDIR``)
+# ``INFODIR``
+#   info documentation (``DATAROOTDIR/info``)
+# ``LOCALEDIR``
+#   locale-dependent data (``DATAROOTDIR/locale``)
+# ``MANDIR``
+#   man documentation (``DATAROOTDIR/man``)
+# ``DOCDIR``
+#   documentation root (``DATAROOTDIR/doc/PROJECT_NAME``)
+#
+# If the includer does not define a value the above-shown default will be
+# used and the value will appear in the cache for editing by the user.
+#
+# Special Cases
+# ^^^^^^^^^^^^^
+#
+# The following values of :variable:`CMAKE_INSTALL_PREFIX` are special:
+#
+# ``/``
+#
+#   For ``<dir>`` other than the ``SYSCONFDIR`` and ``LOCALSTATEDIR``,
+#   the value of ``CMAKE_INSTALL_<dir>`` is prefixed with ``usr/`` if
+#   it is not user-specified as an absolute path.  For example, the
+#   ``INCLUDEDIR`` value ``include`` becomes ``usr/include``.
+#   This is required by the `GNU Coding Standards`_, which state:
+#
+#     When building the complete GNU system, the prefix will be empty
+#     and ``/usr`` will be a symbolic link to ``/``.
+#
+# ``/usr``
+#
+#   For ``<dir>`` equal to ``SYSCONFDIR`` or ``LOCALSTATEDIR``, the
+#   ``CMAKE_INSTALL_FULL_<dir>`` is computed by prepending just ``/``
+#   to the value of ``CMAKE_INSTALL_<dir>`` if it is not user-specified
+#   as an absolute path.  For example, the ``SYSCONFDIR`` value ``etc``
+#   becomes ``/etc``.  This is required by the `GNU Coding Standards`_.
+#
+# ``/opt/...``
+#
+#   For ``<dir>`` equal to ``SYSCONFDIR`` or ``LOCALSTATEDIR``, the
+#   ``CMAKE_INSTALL_FULL_<dir>`` is computed by *appending* the prefix
+#   to the value of ``CMAKE_INSTALL_<dir>`` if it is not user-specified
+#   as an absolute path.  For example, the ``SYSCONFDIR`` value ``etc``
+#   becomes ``/etc/opt/...``.  This is defined by the
+#   `Filesystem Hierarchy Standard`_.
+#
+# .. _`Filesystem Hierarchy Standard`: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html
+
+#=============================================================================
+# Copyright 2015 Alex Turbov <i.zaufi@gmail.com>
+# Copyright 2011 Nikita Krupen'ko <krnekit@gmail.com>
+# Copyright 2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Installation directories
+#
+if(NOT DEFINED CMAKE_INSTALL_BINDIR)
+  set(CMAKE_INSTALL_BINDIR "bin" CACHE PATH "user executables (bin)")
+endif()
+
+if(NOT DEFINED CMAKE_INSTALL_SBINDIR)
+  set(CMAKE_INSTALL_SBINDIR "sbin" CACHE PATH "system admin executables (sbin)")
+endif()
+
+if(NOT DEFINED CMAKE_INSTALL_LIBEXECDIR)
+  set(CMAKE_INSTALL_LIBEXECDIR "libexec" CACHE PATH "program executables (libexec)")
+endif()
+
+if(NOT DEFINED CMAKE_INSTALL_SYSCONFDIR)
+  set(CMAKE_INSTALL_SYSCONFDIR "etc" CACHE PATH "read-only single-machine data (etc)")
+endif()
+
+if(NOT DEFINED CMAKE_INSTALL_SHAREDSTATEDIR)
+  set(CMAKE_INSTALL_SHAREDSTATEDIR "com" CACHE PATH "modifiable architecture-independent data (com)")
+endif()
+
+if(NOT DEFINED CMAKE_INSTALL_LOCALSTATEDIR)
+  set(CMAKE_INSTALL_LOCALSTATEDIR "var" CACHE PATH "modifiable single-machine data (var)")
+endif()
+
+# We check if the variable was manually set and not cached, in order to
+# allow projects to set the values as normal variables before including
+# GNUInstallDirs to avoid having the entries cached or user-editable. It
+# replaces the "if(NOT DEFINED CMAKE_INSTALL_XXX)" checks in all the
+# other cases.
+# If CMAKE_INSTALL_LIBDIR is defined, if _libdir_set is false, then the
+# variable is a normal one, otherwise it is a cache one.
+get_property(_libdir_set CACHE CMAKE_INSTALL_LIBDIR PROPERTY TYPE SET)
+if(NOT DEFINED CMAKE_INSTALL_LIBDIR OR (_libdir_set
+    AND DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX
+    AND NOT "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" STREQUAL "${CMAKE_INSTALL_PREFIX}"))
+  # If CMAKE_INSTALL_LIBDIR is not defined, it is always executed.
+  # Otherwise:
+  #  * if _libdir_set is false it is not executed (meaning that it is
+  #    not a cache variable)
+  #  * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is not defined it is
+  #    not executed
+  #  * if _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX and
+  #    CMAKE_INSTALL_PREFIX are the same string it is not executed.
+  #    _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX is updated after the
+  #    execution, of this part of code, therefore at the next inclusion
+  #    of the file, CMAKE_INSTALL_LIBDIR is defined, and the 2 strings
+  #    are equal, meaning that the if is not executed the code the
+  #    second time.
+
+  set(_LIBDIR_DEFAULT "lib")
+  # Override this default 'lib' with 'lib64' iff:
+  #  - we are on Linux system but NOT cross-compiling
+  #  - we are NOT on debian
+  #  - we are on a 64 bits system
+  # reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf
+  # For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if
+  # CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu"
+  # and CMAKE_INSTALL_PREFIX is "/usr"
+  # See http://wiki.debian.org/Multiarch
+  if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX)
+    set(__LAST_LIBDIR_DEFAULT "lib")
+    # __LAST_LIBDIR_DEFAULT is the default value that we compute from
+    # _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX, not a cache entry for
+    # the value that was last used as the default.
+    # This value is used to figure out whether the user changed the
+    # CMAKE_INSTALL_LIBDIR value manually, or if the value was the
+    # default one. When CMAKE_INSTALL_PREFIX changes, the value is
+    # updated to the new default, unless the user explicitly changed it.
+  endif()
+  if(CMAKE_SYSTEM_NAME MATCHES "^(Linux|kFreeBSD|GNU)$"
+      AND NOT CMAKE_CROSSCOMPILING)
+    if (EXISTS "/etc/debian_version") # is this a debian system ?
+      if(CMAKE_LIBRARY_ARCHITECTURE)
+        if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$")
+          set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}")
+        endif()
+        if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX
+            AND "${_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$")
+          set(__LAST_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}")
+        endif()
+      endif()
+    else() # not debian, rely on CMAKE_SIZEOF_VOID_P:
+      if(NOT DEFINED CMAKE_SIZEOF_VOID_P)
+        message(AUTHOR_WARNING
+          "Unable to determine default CMAKE_INSTALL_LIBDIR directory because no target architecture is known. "
+          "Please enable at least one language before including GNUInstallDirs.")
+      else()
+        if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8")
+          set(_LIBDIR_DEFAULT "lib64")
+          if(DEFINED _GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX)
+            set(__LAST_LIBDIR_DEFAULT "lib64")
+          endif()
+        endif()
+      endif()
+    endif()
+  endif()
+  if(NOT DEFINED CMAKE_INSTALL_LIBDIR)
+    set(CMAKE_INSTALL_LIBDIR "${_LIBDIR_DEFAULT}" CACHE PATH "object code libraries (${_LIBDIR_DEFAULT})")
+  elseif(DEFINED __LAST_LIBDIR_DEFAULT
+      AND "${__LAST_LIBDIR_DEFAULT}" STREQUAL "${CMAKE_INSTALL_LIBDIR}")
+    set_property(CACHE CMAKE_INSTALL_LIBDIR PROPERTY VALUE "${_LIBDIR_DEFAULT}")
+  endif()
+endif()
+# Save for next run
+set(_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}" CACHE INTERNAL "CMAKE_INSTALL_PREFIX during last run")
+unset(_libdir_set)
+unset(__LAST_LIBDIR_DEFAULT)
+
+
+if(NOT DEFINED CMAKE_INSTALL_INCLUDEDIR)
+  set(CMAKE_INSTALL_INCLUDEDIR "include" CACHE PATH "C header files (include)")
+endif()
+
+if(NOT DEFINED CMAKE_INSTALL_OLDINCLUDEDIR)
+  set(CMAKE_INSTALL_OLDINCLUDEDIR "/usr/include" CACHE PATH "C header files for non-gcc (/usr/include)")
+endif()
+
+if(NOT DEFINED CMAKE_INSTALL_DATAROOTDIR)
+  set(CMAKE_INSTALL_DATAROOTDIR "share" CACHE PATH "read-only architecture-independent data root (share)")
+endif()
+
+#-----------------------------------------------------------------------------
+# Values whose defaults are relative to DATAROOTDIR.  Store empty values in
+# the cache and store the defaults in local variables if the cache values are
+# not set explicitly.  This auto-updates the defaults as DATAROOTDIR changes.
+
+if(NOT CMAKE_INSTALL_DATADIR)
+  set(CMAKE_INSTALL_DATADIR "" CACHE PATH "read-only architecture-independent data (DATAROOTDIR)")
+  set(CMAKE_INSTALL_DATADIR "${CMAKE_INSTALL_DATAROOTDIR}")
+endif()
+
+if(CMAKE_SYSTEM_NAME STREQUAL "OpenBSD")
+  if(NOT CMAKE_INSTALL_INFODIR)
+    set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (info)")
+    set(CMAKE_INSTALL_INFODIR "info")
+  endif()
+
+  if(NOT CMAKE_INSTALL_MANDIR)
+    set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (man)")
+    set(CMAKE_INSTALL_MANDIR "man")
+  endif()
+else()
+  if(NOT CMAKE_INSTALL_INFODIR)
+    set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (DATAROOTDIR/info)")
+    set(CMAKE_INSTALL_INFODIR "${CMAKE_INSTALL_DATAROOTDIR}/info")
+  endif()
+
+  if(NOT CMAKE_INSTALL_MANDIR)
+    set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (DATAROOTDIR/man)")
+    set(CMAKE_INSTALL_MANDIR "${CMAKE_INSTALL_DATAROOTDIR}/man")
+  endif()
+endif()
+
+if(NOT CMAKE_INSTALL_LOCALEDIR)
+  set(CMAKE_INSTALL_LOCALEDIR "" CACHE PATH "locale-dependent data (DATAROOTDIR/locale)")
+  set(CMAKE_INSTALL_LOCALEDIR "${CMAKE_INSTALL_DATAROOTDIR}/locale")
+endif()
+
+if(NOT CMAKE_INSTALL_DOCDIR)
+  set(CMAKE_INSTALL_DOCDIR "" CACHE PATH "documentation root (DATAROOTDIR/doc/PROJECT_NAME)")
+  set(CMAKE_INSTALL_DOCDIR "${CMAKE_INSTALL_DATAROOTDIR}/doc/${PROJECT_NAME}")
+endif()
+
+#-----------------------------------------------------------------------------
+
+mark_as_advanced(
+  CMAKE_INSTALL_BINDIR
+  CMAKE_INSTALL_SBINDIR
+  CMAKE_INSTALL_LIBEXECDIR
+  CMAKE_INSTALL_SYSCONFDIR
+  CMAKE_INSTALL_SHAREDSTATEDIR
+  CMAKE_INSTALL_LOCALSTATEDIR
+  CMAKE_INSTALL_LIBDIR
+  CMAKE_INSTALL_INCLUDEDIR
+  CMAKE_INSTALL_OLDINCLUDEDIR
+  CMAKE_INSTALL_DATAROOTDIR
+  CMAKE_INSTALL_DATADIR
+  CMAKE_INSTALL_INFODIR
+  CMAKE_INSTALL_LOCALEDIR
+  CMAKE_INSTALL_MANDIR
+  CMAKE_INSTALL_DOCDIR
+  )
+
+# Result directories
+#
+foreach(dir
+    BINDIR
+    SBINDIR
+    LIBEXECDIR
+    SYSCONFDIR
+    SHAREDSTATEDIR
+    LOCALSTATEDIR
+    LIBDIR
+    INCLUDEDIR
+    OLDINCLUDEDIR
+    DATAROOTDIR
+    DATADIR
+    INFODIR
+    LOCALEDIR
+    MANDIR
+    DOCDIR
+    )
+  if(NOT IS_ABSOLUTE "${CMAKE_INSTALL_${dir}}")
+    # Handle special cases:
+    # - CMAKE_INSTALL_PREFIX == /
+    # - CMAKE_INSTALL_PREFIX == /usr
+    # - CMAKE_INSTALL_PREFIX == /opt/...
+    if("${CMAKE_INSTALL_PREFIX}" STREQUAL "/")
+      if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR")
+        set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}")
+      else()
+        if (NOT "${CMAKE_INSTALL_${dir}}" MATCHES "^usr/")
+          set(CMAKE_INSTALL_${dir} "usr/${CMAKE_INSTALL_${dir}}")
+        endif()
+        set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}")
+      endif()
+    elseif("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/?$")
+      if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR")
+        set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}")
+      else()
+        set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}")
+      endif()
+    elseif("${CMAKE_INSTALL_PREFIX}" MATCHES "^/opt/.*")
+      if("${dir}" STREQUAL "SYSCONFDIR" OR "${dir}" STREQUAL "LOCALSTATEDIR")
+        set(CMAKE_INSTALL_FULL_${dir} "/${CMAKE_INSTALL_${dir}}${CMAKE_INSTALL_PREFIX}")
+      else()
+        set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}")
+      endif()
+    else()
+      set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}")
+    endif()
+  else()
+    set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_${dir}}")
+  endif()
+endforeach()
diff --git a/share/cmake-3.6/Modules/GenerateExportHeader.cmake b/share/cmake-3.6/Modules/GenerateExportHeader.cmake
new file mode 100644
index 0000000..6389d30
--- /dev/null
+++ b/share/cmake-3.6/Modules/GenerateExportHeader.cmake
@@ -0,0 +1,409 @@
+#.rst:
+# GenerateExportHeader
+# --------------------
+#
+# Function for generation of export macros for libraries
+#
+# This module provides the function GENERATE_EXPORT_HEADER().
+#
+# The ``GENERATE_EXPORT_HEADER`` function can be used to generate a file
+# suitable for preprocessor inclusion which contains EXPORT macros to be
+# used in library classes::
+#
+#    GENERATE_EXPORT_HEADER( LIBRARY_TARGET
+#              [BASE_NAME <base_name>]
+#              [EXPORT_MACRO_NAME <export_macro_name>]
+#              [EXPORT_FILE_NAME <export_file_name>]
+#              [DEPRECATED_MACRO_NAME <deprecated_macro_name>]
+#              [NO_EXPORT_MACRO_NAME <no_export_macro_name>]
+#              [STATIC_DEFINE <static_define>]
+#              [NO_DEPRECATED_MACRO_NAME <no_deprecated_macro_name>]
+#              [DEFINE_NO_DEPRECATED]
+#              [PREFIX_NAME <prefix_name>]
+#    )
+#
+#
+# The target properties :prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>`
+# and :prop_tgt:`VISIBILITY_INLINES_HIDDEN` can be used to add the appropriate
+# compile flags for targets.  See the documentation of those target properties,
+# and the convenience variables
+# :variable:`CMAKE_CXX_VISIBILITY_PRESET <CMAKE_<LANG>_VISIBILITY_PRESET>` and
+# :variable:`CMAKE_VISIBILITY_INLINES_HIDDEN`.
+#
+# By default ``GENERATE_EXPORT_HEADER()`` generates macro names in a file
+# name determined by the name of the library.  This means that in the
+# simplest case, users of ``GenerateExportHeader`` will be equivalent to:
+#
+# .. code-block:: cmake
+#
+#    set(CMAKE_CXX_VISIBILITY_PRESET hidden)
+#    set(CMAKE_VISIBILITY_INLINES_HIDDEN 1)
+#    add_library(somelib someclass.cpp)
+#    generate_export_header(somelib)
+#    install(TARGETS somelib DESTINATION ${LIBRARY_INSTALL_DIR})
+#    install(FILES
+#     someclass.h
+#     ${PROJECT_BINARY_DIR}/somelib_export.h DESTINATION ${INCLUDE_INSTALL_DIR}
+#    )
+#
+#
+# And in the ABI header files:
+#
+# .. code-block:: c++
+#
+#    #include "somelib_export.h"
+#    class SOMELIB_EXPORT SomeClass {
+#      ...
+#    };
+#
+#
+# The CMake fragment will generate a file in the
+# ``${CMAKE_CURRENT_BINARY_DIR}`` called ``somelib_export.h`` containing the
+# macros ``SOMELIB_EXPORT``, ``SOMELIB_NO_EXPORT``, ``SOMELIB_DEPRECATED``,
+# ``SOMELIB_DEPRECATED_EXPORT`` and ``SOMELIB_DEPRECATED_NO_EXPORT``.  The
+# resulting file should be installed with other headers in the library.
+#
+# The ``BASE_NAME`` argument can be used to override the file name and the
+# names used for the macros:
+#
+# .. code-block:: cmake
+#
+#    add_library(somelib someclass.cpp)
+#    generate_export_header(somelib
+#      BASE_NAME other_name
+#    )
+#
+#
+# Generates a file called ``other_name_export.h`` containing the macros
+# ``OTHER_NAME_EXPORT``, ``OTHER_NAME_NO_EXPORT`` and ``OTHER_NAME_DEPRECATED``
+# etc.
+#
+# The ``BASE_NAME`` may be overridden by specifiying other options in the
+# function.  For example:
+#
+# .. code-block:: cmake
+#
+#    add_library(somelib someclass.cpp)
+#    generate_export_header(somelib
+#      EXPORT_MACRO_NAME OTHER_NAME_EXPORT
+#    )
+#
+#
+# creates the macro ``OTHER_NAME_EXPORT`` instead of ``SOMELIB_EXPORT``, but
+# other macros and the generated file name is as default:
+#
+# .. code-block:: cmake
+#
+#    add_library(somelib someclass.cpp)
+#    generate_export_header(somelib
+#      DEPRECATED_MACRO_NAME KDE_DEPRECATED
+#    )
+#
+#
+# creates the macro ``KDE_DEPRECATED`` instead of ``SOMELIB_DEPRECATED``.
+#
+# If ``LIBRARY_TARGET`` is a static library, macros are defined without
+# values.
+#
+# If the same sources are used to create both a shared and a static
+# library, the uppercased symbol ``${BASE_NAME}_STATIC_DEFINE`` should be
+# used when building the static library:
+#
+# .. code-block:: cmake
+#
+#    add_library(shared_variant SHARED ${lib_SRCS})
+#    add_library(static_variant ${lib_SRCS})
+#    generate_export_header(shared_variant BASE_NAME libshared_and_static)
+#    set_target_properties(static_variant PROPERTIES
+#      COMPILE_FLAGS -DLIBSHARED_AND_STATIC_STATIC_DEFINE)
+#
+# This will cause the export macros to expand to nothing when building
+# the static library.
+#
+# If ``DEFINE_NO_DEPRECATED`` is specified, then a macro
+# ``${BASE_NAME}_NO_DEPRECATED`` will be defined This macro can be used to
+# remove deprecated code from preprocessor output:
+#
+# .. code-block:: cmake
+#
+#    option(EXCLUDE_DEPRECATED "Exclude deprecated parts of the library" FALSE)
+#    if (EXCLUDE_DEPRECATED)
+#      set(NO_BUILD_DEPRECATED DEFINE_NO_DEPRECATED)
+#    endif()
+#    generate_export_header(somelib ${NO_BUILD_DEPRECATED})
+#
+#
+# And then in somelib:
+#
+# .. code-block:: c++
+#
+#    class SOMELIB_EXPORT SomeClass
+#    {
+#    public:
+#    #ifndef SOMELIB_NO_DEPRECATED
+#      SOMELIB_DEPRECATED void oldMethod();
+#    #endif
+#    };
+#
+# .. code-block:: c++
+#
+#    #ifndef SOMELIB_NO_DEPRECATED
+#    void SomeClass::oldMethod() {  }
+#    #endif
+#
+#
+# If ``PREFIX_NAME`` is specified, the argument will be used as a prefix to
+# all generated macros.
+#
+# For example:
+#
+# .. code-block:: cmake
+#
+#    generate_export_header(somelib PREFIX_NAME VTK_)
+#
+# Generates the macros ``VTK_SOMELIB_EXPORT`` etc.
+#
+# ::
+#
+#    ADD_COMPILER_EXPORT_FLAGS( [<output_variable>] )
+#
+# The ``ADD_COMPILER_EXPORT_FLAGS`` function adds ``-fvisibility=hidden`` to
+# :variable:`CMAKE_CXX_FLAGS <CMAKE_<LANG>_FLAGS>` if supported, and is a no-op
+# on Windows which does not need extra compiler flags for exporting support.
+# You may optionally pass a single argument to ``ADD_COMPILER_EXPORT_FLAGS``
+# that will be populated with the ``CXX_FLAGS`` required to enable visibility
+# support for the compiler/architecture in use.
+#
+# This function is deprecated.  Set the target properties
+# :prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>` and
+# :prop_tgt:`VISIBILITY_INLINES_HIDDEN` instead.
+
+#=============================================================================
+# Copyright 2011 Stephen Kelly <steveire@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(CMakeParseArguments)
+include(CheckCXXCompilerFlag)
+
+# TODO: Install this macro separately?
+macro(_check_cxx_compiler_attribute _ATTRIBUTE _RESULT)
+  check_cxx_source_compiles("${_ATTRIBUTE} int somefunc() { return 0; }
+    int main() { return somefunc();}" ${_RESULT}
+  )
+endmacro()
+
+macro(_test_compiler_hidden_visibility)
+
+  if(CMAKE_COMPILER_IS_GNUCXX AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS "4.2")
+    set(GCC_TOO_OLD TRUE)
+  elseif(CMAKE_COMPILER_IS_GNUC AND CMAKE_C_COMPILER_VERSION VERSION_LESS "4.2")
+    set(GCC_TOO_OLD TRUE)
+  elseif(CMAKE_CXX_COMPILER_ID MATCHES Intel AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS "12.0")
+    set(_INTEL_TOO_OLD TRUE)
+  endif()
+
+  # Exclude XL here because it misinterprets -fvisibility=hidden even though
+  # the check_cxx_compiler_flag passes
+  if(NOT GCC_TOO_OLD
+      AND NOT _INTEL_TOO_OLD
+      AND NOT WIN32
+      AND NOT CYGWIN
+      AND NOT CMAKE_CXX_COMPILER_ID MATCHES XL
+      AND NOT CMAKE_CXX_COMPILER_ID MATCHES PGI
+      AND NOT CMAKE_CXX_COMPILER_ID MATCHES Watcom)
+    check_cxx_compiler_flag(-fvisibility=hidden COMPILER_HAS_HIDDEN_VISIBILITY)
+    check_cxx_compiler_flag(-fvisibility-inlines-hidden
+      COMPILER_HAS_HIDDEN_INLINE_VISIBILITY)
+    option(USE_COMPILER_HIDDEN_VISIBILITY
+      "Use HIDDEN visibility support if available." ON)
+    mark_as_advanced(USE_COMPILER_HIDDEN_VISIBILITY)
+  endif()
+endmacro()
+
+macro(_test_compiler_has_deprecated)
+  # NOTE:  Some Embarcadero compilers silently compile __declspec(deprecated)
+  # without error, but this is not a documented feature and the attribute does
+  # not actually generate any warnings.
+  if(CMAKE_CXX_COMPILER_ID MATCHES Borland
+      OR CMAKE_CXX_COMPILER_ID MATCHES Embarcadero
+      OR CMAKE_CXX_COMPILER_ID MATCHES HP
+      OR GCC_TOO_OLD
+      OR CMAKE_CXX_COMPILER_ID MATCHES PGI
+      OR CMAKE_CXX_COMPILER_ID MATCHES Watcom)
+    set(COMPILER_HAS_DEPRECATED "" CACHE INTERNAL
+      "Compiler support for a deprecated attribute")
+  else()
+    _check_cxx_compiler_attribute("__attribute__((__deprecated__))"
+      COMPILER_HAS_DEPRECATED_ATTR)
+    if(COMPILER_HAS_DEPRECATED_ATTR)
+      set(COMPILER_HAS_DEPRECATED "${COMPILER_HAS_DEPRECATED_ATTR}"
+        CACHE INTERNAL "Compiler support for a deprecated attribute")
+    else()
+      _check_cxx_compiler_attribute("__declspec(deprecated)"
+        COMPILER_HAS_DEPRECATED)
+    endif()
+  endif()
+endmacro()
+
+get_filename_component(_GENERATE_EXPORT_HEADER_MODULE_DIR
+  "${CMAKE_CURRENT_LIST_FILE}" PATH)
+
+macro(_DO_SET_MACRO_VALUES TARGET_LIBRARY)
+  set(DEFINE_DEPRECATED)
+  set(DEFINE_EXPORT)
+  set(DEFINE_IMPORT)
+  set(DEFINE_NO_EXPORT)
+
+  if (COMPILER_HAS_DEPRECATED_ATTR)
+    set(DEFINE_DEPRECATED "__attribute__ ((__deprecated__))")
+  elseif(COMPILER_HAS_DEPRECATED)
+    set(DEFINE_DEPRECATED "__declspec(deprecated)")
+  endif()
+
+  get_property(type TARGET ${TARGET_LIBRARY} PROPERTY TYPE)
+
+  if(NOT ${type} STREQUAL "STATIC_LIBRARY")
+    if(WIN32 OR CYGWIN)
+      set(DEFINE_EXPORT "__declspec(dllexport)")
+      set(DEFINE_IMPORT "__declspec(dllimport)")
+    elseif(COMPILER_HAS_HIDDEN_VISIBILITY AND USE_COMPILER_HIDDEN_VISIBILITY)
+      set(DEFINE_EXPORT "__attribute__((visibility(\"default\")))")
+      set(DEFINE_IMPORT "__attribute__((visibility(\"default\")))")
+      set(DEFINE_NO_EXPORT "__attribute__((visibility(\"hidden\")))")
+    endif()
+  endif()
+endmacro()
+
+macro(_DO_GENERATE_EXPORT_HEADER TARGET_LIBRARY)
+  # Option overrides
+  set(options DEFINE_NO_DEPRECATED)
+  set(oneValueArgs PREFIX_NAME BASE_NAME EXPORT_MACRO_NAME EXPORT_FILE_NAME
+    DEPRECATED_MACRO_NAME NO_EXPORT_MACRO_NAME STATIC_DEFINE
+    NO_DEPRECATED_MACRO_NAME)
+  set(multiValueArgs)
+
+  cmake_parse_arguments(_GEH "${options}" "${oneValueArgs}" "${multiValueArgs}"
+    ${ARGN})
+
+  set(BASE_NAME "${TARGET_LIBRARY}")
+
+  if(_GEH_BASE_NAME)
+    set(BASE_NAME ${_GEH_BASE_NAME})
+  endif()
+
+  string(TOUPPER ${BASE_NAME} BASE_NAME_UPPER)
+  string(TOLOWER ${BASE_NAME} BASE_NAME_LOWER)
+
+  # Default options
+  set(EXPORT_MACRO_NAME "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_EXPORT")
+  set(NO_EXPORT_MACRO_NAME "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_NO_EXPORT")
+  set(EXPORT_FILE_NAME "${CMAKE_CURRENT_BINARY_DIR}/${BASE_NAME_LOWER}_export.h")
+  set(DEPRECATED_MACRO_NAME "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_DEPRECATED")
+  set(STATIC_DEFINE "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_STATIC_DEFINE")
+  set(NO_DEPRECATED_MACRO_NAME
+    "${_GEH_PREFIX_NAME}${BASE_NAME_UPPER}_NO_DEPRECATED")
+
+  if(_GEH_UNPARSED_ARGUMENTS)
+    message(FATAL_ERROR "Unknown keywords given to GENERATE_EXPORT_HEADER(): \"${_GEH_UNPARSED_ARGUMENTS}\"")
+  endif()
+
+  if(_GEH_EXPORT_MACRO_NAME)
+    set(EXPORT_MACRO_NAME ${_GEH_PREFIX_NAME}${_GEH_EXPORT_MACRO_NAME})
+  endif()
+  string(MAKE_C_IDENTIFIER ${EXPORT_MACRO_NAME} EXPORT_MACRO_NAME)
+  if(_GEH_EXPORT_FILE_NAME)
+    if(IS_ABSOLUTE ${_GEH_EXPORT_FILE_NAME})
+      set(EXPORT_FILE_NAME ${_GEH_EXPORT_FILE_NAME})
+    else()
+      set(EXPORT_FILE_NAME "${CMAKE_CURRENT_BINARY_DIR}/${_GEH_EXPORT_FILE_NAME}")
+    endif()
+  endif()
+  if(_GEH_DEPRECATED_MACRO_NAME)
+    set(DEPRECATED_MACRO_NAME ${_GEH_PREFIX_NAME}${_GEH_DEPRECATED_MACRO_NAME})
+  endif()
+  string(MAKE_C_IDENTIFIER ${DEPRECATED_MACRO_NAME} DEPRECATED_MACRO_NAME)
+  if(_GEH_NO_EXPORT_MACRO_NAME)
+    set(NO_EXPORT_MACRO_NAME ${_GEH_PREFIX_NAME}${_GEH_NO_EXPORT_MACRO_NAME})
+  endif()
+  string(MAKE_C_IDENTIFIER ${NO_EXPORT_MACRO_NAME} NO_EXPORT_MACRO_NAME)
+  if(_GEH_STATIC_DEFINE)
+    set(STATIC_DEFINE ${_GEH_PREFIX_NAME}${_GEH_STATIC_DEFINE})
+  endif()
+  string(MAKE_C_IDENTIFIER ${STATIC_DEFINE} STATIC_DEFINE)
+
+  if(_GEH_DEFINE_NO_DEPRECATED)
+    set(DEFINE_NO_DEPRECATED 1)
+  else()
+    set(DEFINE_NO_DEPRECATED 0)
+  endif()
+
+  if(_GEH_NO_DEPRECATED_MACRO_NAME)
+    set(NO_DEPRECATED_MACRO_NAME
+      ${_GEH_PREFIX_NAME}${_GEH_NO_DEPRECATED_MACRO_NAME})
+  endif()
+  string(MAKE_C_IDENTIFIER ${NO_DEPRECATED_MACRO_NAME} NO_DEPRECATED_MACRO_NAME)
+
+  set(INCLUDE_GUARD_NAME "${EXPORT_MACRO_NAME}_H")
+
+  get_target_property(EXPORT_IMPORT_CONDITION ${TARGET_LIBRARY} DEFINE_SYMBOL)
+
+  if(NOT EXPORT_IMPORT_CONDITION)
+    set(EXPORT_IMPORT_CONDITION ${TARGET_LIBRARY}_EXPORTS)
+  endif()
+  string(MAKE_C_IDENTIFIER ${EXPORT_IMPORT_CONDITION} EXPORT_IMPORT_CONDITION)
+
+  configure_file("${_GENERATE_EXPORT_HEADER_MODULE_DIR}/exportheader.cmake.in"
+    "${EXPORT_FILE_NAME}" @ONLY)
+endmacro()
+
+function(GENERATE_EXPORT_HEADER TARGET_LIBRARY)
+  get_property(type TARGET ${TARGET_LIBRARY} PROPERTY TYPE)
+  if(NOT ${type} STREQUAL "STATIC_LIBRARY"
+      AND NOT ${type} STREQUAL "SHARED_LIBRARY"
+      AND NOT ${type} STREQUAL "OBJECT_LIBRARY"
+      AND NOT ${type} STREQUAL "MODULE_LIBRARY")
+    message(WARNING "This macro can only be used with libraries")
+    return()
+  endif()
+  _test_compiler_hidden_visibility()
+  _test_compiler_has_deprecated()
+  _do_set_macro_values(${TARGET_LIBRARY})
+  _do_generate_export_header(${TARGET_LIBRARY} ${ARGN})
+endfunction()
+
+function(add_compiler_export_flags)
+  if(NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.12)
+    message(DEPRECATION "The add_compiler_export_flags function is obsolete. Use the CXX_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN target properties instead.")
+  endif()
+
+  _test_compiler_hidden_visibility()
+  _test_compiler_has_deprecated()
+
+  if(NOT (USE_COMPILER_HIDDEN_VISIBILITY AND COMPILER_HAS_HIDDEN_VISIBILITY))
+    # Just return if there are no flags to add.
+    return()
+  endif()
+
+  set (EXTRA_FLAGS "-fvisibility=hidden")
+
+  if(COMPILER_HAS_HIDDEN_INLINE_VISIBILITY)
+    set (EXTRA_FLAGS "${EXTRA_FLAGS} -fvisibility-inlines-hidden")
+  endif()
+
+  # Either return the extra flags needed in the supplied argument, or to the
+  # CMAKE_CXX_FLAGS if no argument is supplied.
+  if(ARGC GREATER 0)
+    set(${ARGV0} "${EXTRA_FLAGS}" PARENT_SCOPE)
+  else()
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${EXTRA_FLAGS}" PARENT_SCOPE)
+  endif()
+endfunction()
diff --git a/share/cmake-3.6/Modules/GetPrerequisites.cmake b/share/cmake-3.6/Modules/GetPrerequisites.cmake
new file mode 100644
index 0000000..375349f
--- /dev/null
+++ b/share/cmake-3.6/Modules/GetPrerequisites.cmake
@@ -0,0 +1,1018 @@
+#.rst:
+# GetPrerequisites
+# ----------------
+#
+# Functions to analyze and list executable file prerequisites.
+#
+# This module provides functions to list the .dll, .dylib or .so files
+# that an executable or shared library file depends on.  (Its
+# prerequisites.)
+#
+# It uses various tools to obtain the list of required shared library
+# files:
+#
+# ::
+#
+#    dumpbin (Windows)
+#    objdump (MinGW on Windows)
+#    ldd (Linux/Unix)
+#    otool (Mac OSX)
+#
+# The following functions are provided by this module:
+#
+# ::
+#
+#    get_prerequisites
+#    list_prerequisites
+#    list_prerequisites_by_glob
+#    gp_append_unique
+#    is_file_executable
+#    gp_item_default_embedded_path
+#      (projects can override with gp_item_default_embedded_path_override)
+#    gp_resolve_item
+#      (projects can override with gp_resolve_item_override)
+#    gp_resolved_file_type
+#      (projects can override with gp_resolved_file_type_override)
+#    gp_file_type
+#
+# Requires CMake 2.6 or greater because it uses function, break, return
+# and PARENT_SCOPE.
+#
+# ::
+#
+#   GET_PREREQUISITES(<target> <prerequisites_var> <exclude_system> <recurse>
+#                     <exepath> <dirs> [<rpaths>])
+#
+# Get the list of shared library files required by <target>.  The list
+# in the variable named <prerequisites_var> should be empty on first
+# entry to this function.  On exit, <prerequisites_var> will contain the
+# list of required shared library files.
+#
+# <target> is the full path to an executable file.  <prerequisites_var>
+# is the name of a CMake variable to contain the results.
+# <exclude_system> must be 0 or 1 indicating whether to include or
+# exclude "system" prerequisites.  If <recurse> is set to 1 all
+# prerequisites will be found recursively, if set to 0 only direct
+# prerequisites are listed.  <exepath> is the path to the top level
+# executable used for @executable_path replacment on the Mac.  <dirs> is
+# a list of paths where libraries might be found: these paths are
+# searched first when a target without any path info is given.  Then
+# standard system locations are also searched: PATH, Framework
+# locations, /usr/lib...
+#
+# ::
+#
+#   LIST_PREREQUISITES(<target> [<recurse> [<exclude_system> [<verbose>]]])
+#
+# Print a message listing the prerequisites of <target>.
+#
+# <target> is the name of a shared library or executable target or the
+# full path to a shared library or executable file.  If <recurse> is set
+# to 1 all prerequisites will be found recursively, if set to 0 only
+# direct prerequisites are listed.  <exclude_system> must be 0 or 1
+# indicating whether to include or exclude "system" prerequisites.  With
+# <verbose> set to 0 only the full path names of the prerequisites are
+# printed, set to 1 extra informatin will be displayed.
+#
+# ::
+#
+#   LIST_PREREQUISITES_BY_GLOB(<glob_arg> <glob_exp>)
+#
+# Print the prerequisites of shared library and executable files
+# matching a globbing pattern.  <glob_arg> is GLOB or GLOB_RECURSE and
+# <glob_exp> is a globbing expression used with "file(GLOB" or
+# "file(GLOB_RECURSE" to retrieve a list of matching files.  If a
+# matching file is executable, its prerequisites are listed.
+#
+# Any additional (optional) arguments provided are passed along as the
+# optional arguments to the list_prerequisites calls.
+#
+# ::
+#
+#   GP_APPEND_UNIQUE(<list_var> <value>)
+#
+# Append <value> to the list variable <list_var> only if the value is
+# not already in the list.
+#
+# ::
+#
+#   IS_FILE_EXECUTABLE(<file> <result_var>)
+#
+# Return 1 in <result_var> if <file> is a binary executable, 0
+# otherwise.
+#
+# ::
+#
+#   GP_ITEM_DEFAULT_EMBEDDED_PATH(<item> <default_embedded_path_var>)
+#
+# Return the path that others should refer to the item by when the item
+# is embedded inside a bundle.
+#
+# Override on a per-project basis by providing a project-specific
+# gp_item_default_embedded_path_override function.
+#
+# ::
+#
+#   GP_RESOLVE_ITEM(<context> <item> <exepath> <dirs> <resolved_item_var>
+#                   [<rpaths>])
+#
+# Resolve an item into an existing full path file.
+#
+# Override on a per-project basis by providing a project-specific
+# gp_resolve_item_override function.
+#
+# ::
+#
+#   GP_RESOLVED_FILE_TYPE(<original_file> <file> <exepath> <dirs> <type_var>
+#                         [<rpaths>])
+#
+# Return the type of <file> with respect to <original_file>.  String
+# describing type of prerequisite is returned in variable named
+# <type_var>.
+#
+# Use <exepath> and <dirs> if necessary to resolve non-absolute <file>
+# values -- but only for non-embedded items.
+#
+# Possible types are:
+#
+# ::
+#
+#    system
+#    local
+#    embedded
+#    other
+#
+# Override on a per-project basis by providing a project-specific
+# gp_resolved_file_type_override function.
+#
+# ::
+#
+#   GP_FILE_TYPE(<original_file> <file> <type_var>)
+#
+# Return the type of <file> with respect to <original_file>.  String
+# describing type of prerequisite is returned in variable named
+# <type_var>.
+#
+# Possible types are:
+#
+# ::
+#
+#    system
+#    local
+#    embedded
+#    other
+
+#=============================================================================
+# Copyright 2008-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(gp_append_unique list_var value)
+  set(contains 0)
+
+  foreach(item ${${list_var}})
+    if(item STREQUAL "${value}")
+      set(contains 1)
+      break()
+    endif()
+  endforeach()
+
+  if(NOT contains)
+    set(${list_var} ${${list_var}} "${value}" PARENT_SCOPE)
+  endif()
+endfunction()
+
+
+function(is_file_executable file result_var)
+  #
+  # A file is not executable until proven otherwise:
+  #
+  set(${result_var} 0 PARENT_SCOPE)
+
+  get_filename_component(file_full "${file}" ABSOLUTE)
+  string(TOLOWER "${file_full}" file_full_lower)
+
+  # If file name ends in .exe on Windows, *assume* executable:
+  #
+  if(WIN32 AND NOT UNIX)
+    if("${file_full_lower}" MATCHES "\\.exe$")
+      set(${result_var} 1 PARENT_SCOPE)
+      return()
+    endif()
+
+    # A clause could be added here that uses output or return value of dumpbin
+    # to determine ${result_var}. In 99%+? practical cases, the exe name
+    # match will be sufficient...
+    #
+  endif()
+
+  # Use the information returned from the Unix shell command "file" to
+  # determine if ${file_full} should be considered an executable file...
+  #
+  # If the file command's output contains "executable" and does *not* contain
+  # "text" then it is likely an executable suitable for prerequisite analysis
+  # via the get_prerequisites macro.
+  #
+  if(UNIX)
+    if(NOT file_cmd)
+      find_program(file_cmd "file")
+      mark_as_advanced(file_cmd)
+    endif()
+
+    if(file_cmd)
+      execute_process(COMMAND "${file_cmd}" "${file_full}"
+        RESULT_VARIABLE file_rv
+        OUTPUT_VARIABLE file_ov
+        ERROR_VARIABLE file_ev
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        )
+      if(NOT file_rv STREQUAL "0")
+        message(FATAL_ERROR "${file_cmd} failed: ${file_rv}\n${file_ev}")
+      endif()
+
+      # Replace the name of the file in the output with a placeholder token
+      # (the string " _file_full_ ") so that just in case the path name of
+      # the file contains the word "text" or "executable" we are not fooled
+      # into thinking "the wrong thing" because the file name matches the
+      # other 'file' command output we are looking for...
+      #
+      string(REPLACE "${file_full}" " _file_full_ " file_ov "${file_ov}")
+      string(TOLOWER "${file_ov}" file_ov)
+
+      #message(STATUS "file_ov='${file_ov}'")
+      if("${file_ov}" MATCHES "executable")
+        #message(STATUS "executable!")
+        if("${file_ov}" MATCHES "text")
+          #message(STATUS "but text, so *not* a binary executable!")
+        else()
+          set(${result_var} 1 PARENT_SCOPE)
+          return()
+        endif()
+      endif()
+
+      # Also detect position independent executables on Linux,
+      # where "file" gives "shared object ... (uses shared libraries)"
+      if("${file_ov}" MATCHES "shared object.*\(uses shared libs\)")
+        set(${result_var} 1 PARENT_SCOPE)
+        return()
+      endif()
+
+      # "file" version 5.22 does not print "(used shared libraries)"
+      # but uses "interpreter"
+      if("${file_ov}" MATCHES "shared object.*interpreter")
+        set(${result_var} 1 PARENT_SCOPE)
+        return()
+      endif()
+
+    else()
+      message(STATUS "warning: No 'file' command, skipping execute_process...")
+    endif()
+  endif()
+endfunction()
+
+
+function(gp_item_default_embedded_path item default_embedded_path_var)
+
+  # On Windows and Linux, "embed" prerequisites in the same directory
+  # as the executable by default:
+  #
+  set(path "@executable_path")
+  set(overridden 0)
+
+  # On the Mac, relative to the executable depending on the type
+  # of the thing we are embedding:
+  #
+  if(APPLE)
+    #
+    # The assumption here is that all executables in the bundle will be
+    # in same-level-directories inside the bundle. The parent directory
+    # of an executable inside the bundle should be MacOS or a sibling of
+    # MacOS and all embedded paths returned from here will begin with
+    # "@executable_path/../" and will work from all executables in all
+    # such same-level-directories inside the bundle.
+    #
+
+    # By default, embed things right next to the main bundle executable:
+    #
+    set(path "@executable_path/../../Contents/MacOS")
+
+    # Embed .dylibs right next to the main bundle executable:
+    #
+    if(item MATCHES "\\.dylib$")
+      set(path "@executable_path/../MacOS")
+      set(overridden 1)
+    endif()
+
+    # Embed frameworks in the embedded "Frameworks" directory (sibling of MacOS):
+    #
+    if(NOT overridden)
+      if(item MATCHES "[^/]+\\.framework/")
+        set(path "@executable_path/../Frameworks")
+        set(overridden 1)
+      endif()
+    endif()
+  endif()
+
+  # Provide a hook so that projects can override the default embedded location
+  # of any given library by whatever logic they choose:
+  #
+  if(COMMAND gp_item_default_embedded_path_override)
+    gp_item_default_embedded_path_override("${item}" path)
+  endif()
+
+  set(${default_embedded_path_var} "${path}" PARENT_SCOPE)
+endfunction()
+
+
+function(gp_resolve_item context item exepath dirs resolved_item_var)
+  set(resolved 0)
+  set(resolved_item "${item}")
+  if(ARGC GREATER 5)
+    set(rpaths "${ARGV5}")
+  else()
+    set(rpaths "")
+  endif()
+
+  # Is it already resolved?
+  #
+  if(IS_ABSOLUTE "${resolved_item}" AND EXISTS "${resolved_item}")
+    set(resolved 1)
+  endif()
+
+  if(NOT resolved)
+    if(item MATCHES "^@executable_path")
+      #
+      # @executable_path references are assumed relative to exepath
+      #
+      string(REPLACE "@executable_path" "${exepath}" ri "${item}")
+      get_filename_component(ri "${ri}" ABSOLUTE)
+
+      if(EXISTS "${ri}")
+        #message(STATUS "info: embedded item exists (${ri})")
+        set(resolved 1)
+        set(resolved_item "${ri}")
+      else()
+        message(STATUS "warning: embedded item does not exist '${ri}'")
+      endif()
+    endif()
+  endif()
+
+  if(NOT resolved)
+    if(item MATCHES "^@loader_path")
+      #
+      # @loader_path references are assumed relative to the
+      # PATH of the given "context" (presumably another library)
+      #
+      get_filename_component(contextpath "${context}" PATH)
+      string(REPLACE "@loader_path" "${contextpath}" ri "${item}")
+      get_filename_component(ri "${ri}" ABSOLUTE)
+
+      if(EXISTS "${ri}")
+        #message(STATUS "info: embedded item exists (${ri})")
+        set(resolved 1)
+        set(resolved_item "${ri}")
+      else()
+        message(STATUS "warning: embedded item does not exist '${ri}'")
+      endif()
+    endif()
+  endif()
+
+  if(NOT resolved)
+    if(item MATCHES "^@rpath")
+      #
+      # @rpath references are relative to the paths built into the binaries with -rpath
+      # We handle this case like we do for other Unixes
+      #
+      string(REPLACE "@rpath/" "" norpath_item "${item}")
+
+      set(ri "ri-NOTFOUND")
+      find_file(ri "${norpath_item}" ${exepath} ${dirs} ${rpaths} NO_DEFAULT_PATH)
+      if(ri)
+        #message(STATUS "info: 'find_file' in exepath/dirs/rpaths (${ri})")
+        set(resolved 1)
+        set(resolved_item "${ri}")
+        set(ri "ri-NOTFOUND")
+      endif()
+
+    endif()
+  endif()
+
+  if(NOT resolved)
+    set(ri "ri-NOTFOUND")
+    find_file(ri "${item}" ${exepath} ${dirs} NO_DEFAULT_PATH)
+    find_file(ri "${item}" ${exepath} ${dirs} /usr/lib)
+    if(ri)
+      #message(STATUS "info: 'find_file' in exepath/dirs (${ri})")
+      set(resolved 1)
+      set(resolved_item "${ri}")
+      set(ri "ri-NOTFOUND")
+    endif()
+  endif()
+
+  if(NOT resolved)
+    if(item MATCHES "[^/]+\\.framework/")
+      set(fw "fw-NOTFOUND")
+      find_file(fw "${item}"
+        "~/Library/Frameworks"
+        "/Library/Frameworks"
+        "/System/Library/Frameworks"
+      )
+      if(fw)
+        #message(STATUS "info: 'find_file' found framework (${fw})")
+        set(resolved 1)
+        set(resolved_item "${fw}")
+        set(fw "fw-NOTFOUND")
+      endif()
+    endif()
+  endif()
+
+  # Using find_program on Windows will find dll files that are in the PATH.
+  # (Converting simple file names into full path names if found.)
+  #
+  if(WIN32 AND NOT UNIX)
+  if(NOT resolved)
+    set(ri "ri-NOTFOUND")
+    find_program(ri "${item}" PATHS "${exepath};${dirs}" NO_DEFAULT_PATH)
+    find_program(ri "${item}" PATHS "${exepath};${dirs}")
+    if(ri)
+      #message(STATUS "info: 'find_program' in exepath/dirs (${ri})")
+      set(resolved 1)
+      set(resolved_item "${ri}")
+      set(ri "ri-NOTFOUND")
+    endif()
+  endif()
+  endif()
+
+  # Provide a hook so that projects can override item resolution
+  # by whatever logic they choose:
+  #
+  if(COMMAND gp_resolve_item_override)
+    gp_resolve_item_override("${context}" "${item}" "${exepath}" "${dirs}" resolved_item resolved)
+  endif()
+
+  if(NOT resolved)
+    message(STATUS "
+warning: cannot resolve item '${item}'
+
+  possible problems:
+    need more directories?
+    need to use InstallRequiredSystemLibraries?
+    run in install tree instead of build tree?
+")
+#    message(STATUS "
+#******************************************************************************
+#warning: cannot resolve item '${item}'
+#
+#  possible problems:
+#    need more directories?
+#    need to use InstallRequiredSystemLibraries?
+#    run in install tree instead of build tree?
+#
+#    context='${context}'
+#    item='${item}'
+#    exepath='${exepath}'
+#    dirs='${dirs}'
+#    resolved_item_var='${resolved_item_var}'
+#******************************************************************************
+#")
+  endif()
+
+  set(${resolved_item_var} "${resolved_item}" PARENT_SCOPE)
+endfunction()
+
+
+function(gp_resolved_file_type original_file file exepath dirs type_var)
+  if(ARGC GREATER 5)
+    set(rpaths "${ARGV5}")
+  else()
+    set(rpaths "")
+  endif()
+  #message(STATUS "**")
+
+  if(NOT IS_ABSOLUTE "${original_file}")
+    message(STATUS "warning: gp_resolved_file_type expects absolute full path for first arg original_file")
+  endif()
+  get_filename_component(original_file "${original_file}" ABSOLUTE) # canonicalize path
+
+  set(is_embedded 0)
+  set(is_local 0)
+  set(is_system 0)
+
+  set(resolved_file "${file}")
+
+  if("${file}" MATCHES "^@(executable|loader)_path")
+    set(is_embedded 1)
+  endif()
+
+  if(NOT is_embedded)
+    if(NOT IS_ABSOLUTE "${file}")
+      gp_resolve_item("${original_file}" "${file}" "${exepath}" "${dirs}" resolved_file "${rpaths}")
+    endif()
+    get_filename_component(resolved_file "${resolved_file}" ABSOLUTE) # canonicalize path
+
+    string(TOLOWER "${original_file}" original_lower)
+    string(TOLOWER "${resolved_file}" lower)
+
+    if(UNIX)
+      if(resolved_file MATCHES "^(/lib/|/lib32/|/lib64/|/usr/lib/|/usr/lib32/|/usr/lib64/|/usr/X11R6/|/usr/bin/)")
+        set(is_system 1)
+      endif()
+    endif()
+
+    if(APPLE)
+      if(resolved_file MATCHES "^(/System/Library/|/usr/lib/)")
+        set(is_system 1)
+      endif()
+    endif()
+
+    if(WIN32)
+      string(TOLOWER "$ENV{SystemRoot}" sysroot)
+      file(TO_CMAKE_PATH "${sysroot}" sysroot)
+
+      string(TOLOWER "$ENV{windir}" windir)
+      file(TO_CMAKE_PATH "${windir}" windir)
+
+      if(lower MATCHES "^(api-ms-win-|${sysroot}/sys(tem|wow)|${windir}/sys(tem|wow)|(.*/)*msvc[^/]+dll)")
+        set(is_system 1)
+      endif()
+
+      if(UNIX)
+        # if cygwin, we can get the properly formed windows paths from cygpath
+        find_program(CYGPATH_EXECUTABLE cygpath)
+
+        if(CYGPATH_EXECUTABLE)
+          execute_process(COMMAND ${CYGPATH_EXECUTABLE} -W
+                          RESULT_VARIABLE env_rv
+                          OUTPUT_VARIABLE env_windir
+                          ERROR_VARIABLE env_ev
+                          OUTPUT_STRIP_TRAILING_WHITESPACE)
+          if(NOT env_rv STREQUAL "0")
+            message(FATAL_ERROR "${CYGPATH_EXECUTABLE} -W failed: ${env_rv}\n${env_ev}")
+          endif()
+          execute_process(COMMAND ${CYGPATH_EXECUTABLE} -S
+                          RESULT_VARIABLE env_rv
+                          OUTPUT_VARIABLE env_sysdir
+                          ERROR_VARIABLE env_ev
+                          OUTPUT_STRIP_TRAILING_WHITESPACE)
+          if(NOT env_rv STREQUAL "0")
+            message(FATAL_ERROR "${CYGPATH_EXECUTABLE} -S failed: ${env_rv}\n${env_ev}")
+          endif()
+          string(TOLOWER "${env_windir}" windir)
+          string(TOLOWER "${env_sysdir}" sysroot)
+
+          if(lower MATCHES "^(api-ms-win-|${sysroot}/sys(tem|wow)|${windir}/sys(tem|wow)|(.*/)*msvc[^/]+dll)")
+            set(is_system 1)
+          endif()
+        endif()
+      endif()
+    endif()
+
+    if(NOT is_system)
+      get_filename_component(original_path "${original_lower}" PATH)
+      get_filename_component(path "${lower}" PATH)
+      if(original_path STREQUAL path)
+        set(is_local 1)
+      else()
+        string(LENGTH "${original_path}/" original_length)
+        string(LENGTH "${lower}" path_length)
+        if(${path_length} GREATER ${original_length})
+          string(SUBSTRING "${lower}" 0 ${original_length} path)
+          if("${original_path}/" STREQUAL path)
+            set(is_embedded 1)
+          endif()
+        endif()
+      endif()
+    endif()
+  endif()
+
+  # Return type string based on computed booleans:
+  #
+  set(type "other")
+
+  if(is_system)
+    set(type "system")
+  elseif(is_embedded)
+    set(type "embedded")
+  elseif(is_local)
+    set(type "local")
+  endif()
+
+  #message(STATUS "gp_resolved_file_type: '${file}' '${resolved_file}'")
+  #message(STATUS "                type: '${type}'")
+
+  if(NOT is_embedded)
+    if(NOT IS_ABSOLUTE "${resolved_file}")
+      if(lower MATCHES "^msvc[^/]+dll" AND is_system)
+        message(STATUS "info: non-absolute msvc file '${file}' returning type '${type}'")
+      else()
+        message(STATUS "warning: gp_resolved_file_type non-absolute file '${file}' returning type '${type}' -- possibly incorrect")
+      endif()
+    endif()
+  endif()
+
+  # Provide a hook so that projects can override the decision on whether a
+  # library belongs to the system or not by whatever logic they choose:
+  #
+  if(COMMAND gp_resolved_file_type_override)
+    gp_resolved_file_type_override("${resolved_file}" type)
+  endif()
+
+  set(${type_var} "${type}" PARENT_SCOPE)
+
+  #message(STATUS "**")
+endfunction()
+
+
+function(gp_file_type original_file file type_var)
+  if(NOT IS_ABSOLUTE "${original_file}")
+    message(STATUS "warning: gp_file_type expects absolute full path for first arg original_file")
+  endif()
+
+  get_filename_component(exepath "${original_file}" PATH)
+
+  set(type "")
+  gp_resolved_file_type("${original_file}" "${file}" "${exepath}" "" type)
+
+  set(${type_var} "${type}" PARENT_SCOPE)
+endfunction()
+
+
+function(get_prerequisites target prerequisites_var exclude_system recurse exepath dirs)
+  set(verbose 0)
+  set(eol_char "E")
+  if(ARGC GREATER 6)
+    set(rpaths "${ARGV6}")
+  else()
+    set(rpaths "")
+  endif()
+
+  if(NOT IS_ABSOLUTE "${target}")
+    message("warning: target '${target}' is not absolute...")
+  endif()
+
+  if(NOT EXISTS "${target}")
+    message("warning: target '${target}' does not exist...")
+  endif()
+
+  set(gp_cmd_paths ${gp_cmd_paths}
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\14.0;InstallDir]/../../VC/bin"
+    "$ENV{VS140COMNTOOLS}/../../VC/bin"
+    "C:/Program Files (x86)/Microsoft Visual Studio 14.0/VC/bin"
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\12.0;InstallDir]/../../VC/bin"
+    "$ENV{VS120COMNTOOLS}/../../VC/bin"
+    "C:/Program Files (x86)/Microsoft Visual Studio 12.0/VC/bin"
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\11.0;InstallDir]/../../VC/bin"
+    "$ENV{VS110COMNTOOLS}/../../VC/bin"
+    "C:/Program Files (x86)/Microsoft Visual Studio 11.0/VC/bin"
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\10.0;InstallDir]/../../VC/bin"
+    "$ENV{VS100COMNTOOLS}/../../VC/bin"
+    "C:/Program Files (x86)/Microsoft Visual Studio 10.0/VC/bin"
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\9.0;InstallDir]/../../VC/bin"
+    "$ENV{VS90COMNTOOLS}/../../VC/bin"
+    "C:/Program Files/Microsoft Visual Studio 9.0/VC/bin"
+    "C:/Program Files (x86)/Microsoft Visual Studio 9.0/VC/bin"
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\8.0;InstallDir]/../../VC/bin"
+    "$ENV{VS80COMNTOOLS}/../../VC/bin"
+    "C:/Program Files/Microsoft Visual Studio 8/VC/BIN"
+    "C:/Program Files (x86)/Microsoft Visual Studio 8/VC/BIN"
+    "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\7.1;InstallDir]/../../VC7/bin"
+    "$ENV{VS71COMNTOOLS}/../../VC7/bin"
+    "C:/Program Files/Microsoft Visual Studio .NET 2003/VC7/BIN"
+    "C:/Program Files (x86)/Microsoft Visual Studio .NET 2003/VC7/BIN"
+    "/usr/local/bin"
+    "/usr/bin"
+    )
+
+  # <setup-gp_tool-vars>
+  #
+  # Try to choose the right tool by default. Caller can set gp_tool prior to
+  # calling this function to force using a different tool.
+  #
+  if(NOT gp_tool)
+    set(gp_tool "ldd")
+
+    if(APPLE)
+      set(gp_tool "otool")
+    endif()
+
+    if(WIN32 AND NOT UNIX) # This is how to check for cygwin, har!
+      find_program(gp_dumpbin "dumpbin" PATHS ${gp_cmd_paths})
+      if(gp_dumpbin)
+        set(gp_tool "dumpbin")
+      else() # Try harder. Maybe we're on MinGW
+        set(gp_tool "objdump")
+      endif()
+    endif()
+  endif()
+
+  find_program(gp_cmd ${gp_tool} PATHS ${gp_cmd_paths})
+
+  if(NOT gp_cmd)
+    message(STATUS "warning: could not find '${gp_tool}' - cannot analyze prerequisites...")
+    return()
+  endif()
+
+  set(gp_cmd_maybe_filter)      # optional command to pre-filter gp_tool results
+
+  if(gp_tool STREQUAL "ldd")
+    set(gp_cmd_args "")
+    set(gp_regex "^[\t ]*[^\t ]+ => ([^\t\(]+) .*${eol_char}$")
+    set(gp_regex_error "not found${eol_char}$")
+    set(gp_regex_fallback "^[\t ]*([^\t ]+) => ([^\t ]+).*${eol_char}$")
+    set(gp_regex_cmp_count 1)
+  elseif(gp_tool STREQUAL "otool")
+    set(gp_cmd_args "-L")
+    set(gp_regex "^\t([^\t]+) \\(compatibility version ([0-9]+.[0-9]+.[0-9]+), current version ([0-9]+.[0-9]+.[0-9]+)\\)${eol_char}$")
+    set(gp_regex_error "")
+    set(gp_regex_fallback "")
+    set(gp_regex_cmp_count 3)
+  elseif(gp_tool STREQUAL "dumpbin")
+    set(gp_cmd_args "/dependents")
+    set(gp_regex "^    ([^ ].*[Dd][Ll][Ll])${eol_char}$")
+    set(gp_regex_error "")
+    set(gp_regex_fallback "")
+    set(gp_regex_cmp_count 1)
+  elseif(gp_tool STREQUAL "objdump")
+    set(gp_cmd_args "-p")
+    set(gp_regex "^\t*DLL Name: (.*\\.[Dd][Ll][Ll])${eol_char}$")
+    set(gp_regex_error "")
+    set(gp_regex_fallback "")
+    set(gp_regex_cmp_count 1)
+    # objdump generaates copious output so we create a grep filter to pre-filter results
+    find_program(gp_grep_cmd grep)
+    if(gp_grep_cmd)
+      set(gp_cmd_maybe_filter COMMAND ${gp_grep_cmd} "^[[:blank:]]*DLL Name: ")
+    endif()
+  else()
+    message(STATUS "warning: gp_tool='${gp_tool}' is an unknown tool...")
+    message(STATUS "CMake function get_prerequisites needs more code to handle '${gp_tool}'")
+    message(STATUS "Valid gp_tool values are dumpbin, ldd, objdump and otool.")
+    return()
+  endif()
+
+
+  if(gp_tool STREQUAL "dumpbin")
+    # When running dumpbin, it also needs the "Common7/IDE" directory in the
+    # PATH. It will already be in the PATH if being run from a Visual Studio
+    # command prompt. Add it to the PATH here in case we are running from a
+    # different command prompt.
+    #
+    get_filename_component(gp_cmd_dir "${gp_cmd}" PATH)
+    get_filename_component(gp_cmd_dlls_dir "${gp_cmd_dir}/../../Common7/IDE" ABSOLUTE)
+    # Use cmake paths as a user may have a PATH element ending with a backslash.
+    # This will escape the list delimiter and create havoc!
+    if(EXISTS "${gp_cmd_dlls_dir}")
+      # only add to the path if it is not already in the path
+      set(gp_found_cmd_dlls_dir 0)
+      file(TO_CMAKE_PATH "$ENV{PATH}" env_path)
+      foreach(gp_env_path_element ${env_path})
+        if(gp_env_path_element STREQUAL gp_cmd_dlls_dir)
+          set(gp_found_cmd_dlls_dir 1)
+        endif()
+      endforeach()
+
+      if(NOT gp_found_cmd_dlls_dir)
+        file(TO_NATIVE_PATH "${gp_cmd_dlls_dir}" gp_cmd_dlls_dir)
+        set(ENV{PATH} "$ENV{PATH};${gp_cmd_dlls_dir}")
+      endif()
+    endif()
+  endif()
+  #
+  # </setup-gp_tool-vars>
+
+  if(gp_tool STREQUAL "ldd")
+    set(old_ld_env "$ENV{LD_LIBRARY_PATH}")
+    set(new_ld_env "${exepath}")
+    foreach(dir ${dirs})
+      set(new_ld_env "${new_ld_env}:${dir}")
+    endforeach()
+    set(ENV{LD_LIBRARY_PATH} "${new_ld_env}:$ENV{LD_LIBRARY_PATH}")
+  endif()
+
+
+  # Track new prerequisites at each new level of recursion. Start with an
+  # empty list at each level:
+  #
+  set(unseen_prereqs)
+
+  # Run gp_cmd on the target:
+  #
+  execute_process(
+    COMMAND ${gp_cmd} ${gp_cmd_args} ${target}
+    ${gp_cmd_maybe_filter}
+    RESULT_VARIABLE gp_rv
+    OUTPUT_VARIABLE gp_cmd_ov
+    ERROR_VARIABLE gp_ev
+    )
+  if(NOT gp_rv STREQUAL "0")
+    if(gp_tool STREQUAL "dumpbin")
+      # dumpbin error messages seem to go to stdout
+      message(FATAL_ERROR "${gp_cmd} failed: ${gp_rv}\n${gp_ev}\n${gp_cmd_ov}")
+    else()
+      message(FATAL_ERROR "${gp_cmd} failed: ${gp_rv}\n${gp_ev}")
+    endif()
+  endif()
+
+  if(gp_tool STREQUAL "ldd")
+    set(ENV{LD_LIBRARY_PATH} "${old_ld_env}")
+  endif()
+
+  if(verbose)
+    message(STATUS "<RawOutput cmd='${gp_cmd} ${gp_cmd_args} ${target}'>")
+    message(STATUS "gp_cmd_ov='${gp_cmd_ov}'")
+    message(STATUS "</RawOutput>")
+  endif()
+
+  get_filename_component(target_dir "${target}" PATH)
+
+  # Convert to a list of lines:
+  #
+  string(REPLACE ";" "\\;" candidates "${gp_cmd_ov}")
+  string(REPLACE "\n" "${eol_char};" candidates "${candidates}")
+
+  # check for install id and remove it from list, since otool -L can include a
+  # reference to itself
+  set(gp_install_id)
+  if(gp_tool STREQUAL "otool")
+    execute_process(
+      COMMAND otool -D ${target}
+      RESULT_VARIABLE otool_rv
+      OUTPUT_VARIABLE gp_install_id_ov
+      ERROR_VARIABLE otool_ev
+      )
+    if(NOT otool_rv STREQUAL "0")
+      message(FATAL_ERROR "otool -D failed: ${otool_rv}\n${otool_ev}")
+    endif()
+    # second line is install name
+    string(REGEX REPLACE ".*:\n" "" gp_install_id "${gp_install_id_ov}")
+    if(gp_install_id)
+      # trim
+      string(REGEX MATCH "[^\n ].*[^\n ]" gp_install_id "${gp_install_id}")
+      #message("INSTALL ID is \"${gp_install_id}\"")
+    endif()
+  endif()
+
+  # Analyze each line for file names that match the regular expression:
+  #
+  foreach(candidate ${candidates})
+  if("${candidate}" MATCHES "${gp_regex}")
+
+    # Extract information from each candidate:
+    if(gp_regex_error AND "${candidate}" MATCHES "${gp_regex_error}")
+      string(REGEX REPLACE "${gp_regex_fallback}" "\\1" raw_item "${candidate}")
+    else()
+      string(REGEX REPLACE "${gp_regex}" "\\1" raw_item "${candidate}")
+    endif()
+
+    if(gp_regex_cmp_count GREATER 1)
+      string(REGEX REPLACE "${gp_regex}" "\\2" raw_compat_version "${candidate}")
+      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\1" compat_major_version "${raw_compat_version}")
+      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\2" compat_minor_version "${raw_compat_version}")
+      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\3" compat_patch_version "${raw_compat_version}")
+    endif()
+
+    if(gp_regex_cmp_count GREATER 2)
+      string(REGEX REPLACE "${gp_regex}" "\\3" raw_current_version "${candidate}")
+      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\1" current_major_version "${raw_current_version}")
+      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\2" current_minor_version "${raw_current_version}")
+      string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\\.([0-9]+)$" "\\3" current_patch_version "${raw_current_version}")
+    endif()
+
+    # Use the raw_item as the list entries returned by this function. Use the
+    # gp_resolve_item function to resolve it to an actual full path file if
+    # necessary.
+    #
+    set(item "${raw_item}")
+
+    # Add each item unless it is excluded:
+    #
+    set(add_item 1)
+
+    if(item STREQUAL gp_install_id)
+      set(add_item 0)
+    endif()
+
+    if(add_item AND ${exclude_system})
+      set(type "")
+      gp_resolved_file_type("${target}" "${item}" "${exepath}" "${dirs}" type "${rpaths}")
+
+      if(type STREQUAL "system")
+        set(add_item 0)
+      endif()
+    endif()
+
+    if(add_item)
+      list(LENGTH ${prerequisites_var} list_length_before_append)
+      gp_append_unique(${prerequisites_var} "${item}")
+      list(LENGTH ${prerequisites_var} list_length_after_append)
+
+      if(${recurse})
+        # If item was really added, this is the first time we have seen it.
+        # Add it to unseen_prereqs so that we can recursively add *its*
+        # prerequisites...
+        #
+        # But first: resolve its name to an absolute full path name such
+        # that the analysis tools can simply accept it as input.
+        #
+        if(NOT list_length_before_append EQUAL list_length_after_append)
+          gp_resolve_item("${target}" "${item}" "${exepath}" "${dirs}" resolved_item "${rpaths}")
+          set(unseen_prereqs ${unseen_prereqs} "${resolved_item}")
+        endif()
+      endif()
+    endif()
+  else()
+    if(verbose)
+      message(STATUS "ignoring non-matching line: '${candidate}'")
+    endif()
+  endif()
+  endforeach()
+
+  list(LENGTH ${prerequisites_var} prerequisites_var_length)
+  if(prerequisites_var_length GREATER 0)
+    list(SORT ${prerequisites_var})
+  endif()
+  if(${recurse})
+    set(more_inputs ${unseen_prereqs})
+    foreach(input ${more_inputs})
+      get_prerequisites("${input}" ${prerequisites_var} ${exclude_system} ${recurse} "${exepath}" "${dirs}" "${rpaths}")
+    endforeach()
+  endif()
+
+  set(${prerequisites_var} ${${prerequisites_var}} PARENT_SCOPE)
+endfunction()
+
+
+function(list_prerequisites target)
+  if(ARGC GREATER 1 AND NOT "${ARGV1}" STREQUAL "")
+    set(all "${ARGV1}")
+  else()
+    set(all 1)
+  endif()
+
+  if(ARGC GREATER 2 AND NOT "${ARGV2}" STREQUAL "")
+    set(exclude_system "${ARGV2}")
+  else()
+    set(exclude_system 0)
+  endif()
+
+  if(ARGC GREATER 3 AND NOT "${ARGV3}" STREQUAL "")
+    set(verbose "${ARGV3}")
+  else()
+    set(verbose 0)
+  endif()
+
+  set(count 0)
+  set(count_str "")
+  set(print_count "${verbose}")
+  set(print_prerequisite_type "${verbose}")
+  set(print_target "${verbose}")
+  set(type_str "")
+
+  get_filename_component(exepath "${target}" PATH)
+
+  set(prereqs "")
+  get_prerequisites("${target}" prereqs ${exclude_system} ${all} "${exepath}" "")
+
+  if(print_target)
+    message(STATUS "File '${target}' depends on:")
+  endif()
+
+  foreach(d ${prereqs})
+    math(EXPR count "${count} + 1")
+
+    if(print_count)
+      set(count_str "${count}. ")
+    endif()
+
+    if(print_prerequisite_type)
+      gp_file_type("${target}" "${d}" type)
+      set(type_str " (${type})")
+    endif()
+
+    message(STATUS "${count_str}${d}${type_str}")
+  endforeach()
+endfunction()
+
+
+function(list_prerequisites_by_glob glob_arg glob_exp)
+  message(STATUS "=============================================================================")
+  message(STATUS "List prerequisites of executables matching ${glob_arg} '${glob_exp}'")
+  message(STATUS "")
+  file(${glob_arg} file_list ${glob_exp})
+  foreach(f ${file_list})
+    is_file_executable("${f}" is_f_executable)
+    if(is_f_executable)
+      message(STATUS "=============================================================================")
+      list_prerequisites("${f}" ${ARGN})
+      message(STATUS "")
+    endif()
+  endforeach()
+endfunction()
diff --git a/share/cmake-3.2/Modules/ITKCompatibility.cmake b/share/cmake-3.6/Modules/ITKCompatibility.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/ITKCompatibility.cmake
rename to share/cmake-3.6/Modules/ITKCompatibility.cmake
diff --git a/share/cmake-3.6/Modules/InstallRequiredSystemLibraries.cmake b/share/cmake-3.6/Modules/InstallRequiredSystemLibraries.cmake
new file mode 100644
index 0000000..aa84077
--- /dev/null
+++ b/share/cmake-3.6/Modules/InstallRequiredSystemLibraries.cmake
@@ -0,0 +1,528 @@
+#.rst:
+# InstallRequiredSystemLibraries
+# ------------------------------
+#
+# Include this module to search for compiler-provided system runtime
+# libraries and add install rules for them.  Some optional variables
+# may be set prior to including the module to adjust behavior:
+#
+# ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS``
+#   Specify additional runtime libraries that may not be detected.
+#   After inclusion any detected libraries will be appended to this.
+#
+# ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP``
+#   Set to TRUE to skip calling the :command:`install(PROGRAMS)` command to
+#   allow the includer to specify its own install rule, using the value of
+#   ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS`` to get the list of libraries.
+#
+# ``CMAKE_INSTALL_DEBUG_LIBRARIES``
+#   Set to TRUE to install the debug runtime libraries when available
+#   with MSVC tools.
+#
+# ``CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY``
+#   Set to TRUE to install only the debug runtime libraries with MSVC
+#   tools even if the release runtime libraries are also available.
+#
+# ``CMAKE_INSTALL_UCRT_LIBRARIES``
+#   Set to TRUE to install the Windows Universal CRT libraries for
+#   app-local deployment.  This is meaningful only with MSVC from
+#   Visual Studio 2015 or higher.
+#
+# ``CMAKE_INSTALL_MFC_LIBRARIES``
+#   Set to TRUE to install the MSVC MFC runtime libraries.
+#
+# ``CMAKE_INSTALL_OPENMP_LIBRARIES``
+#   Set to TRUE to install the MSVC OpenMP runtime libraries
+#
+# ``CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION``
+#   Specify the :command:`install(PROGRAMS)` command ``DESTINATION``
+#   option.  If not specified, the default is ``bin`` on Windows
+#   and ``lib`` elsewhere.
+#
+# ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS``
+#   Set to TRUE to disable warnings about required library files that
+#   do not exist.  (For example, Visual Studio Express editions may
+#   not provide the redistributable files.)
+#
+# ``CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT``
+#   Specify the :command:`install(PROGRAMS)` command ``COMPONENT``
+#   option.  If not specified, no such option will be used.
+
+#=============================================================================
+# Copyright 2006-2015 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+if(MSVC)
+  file(TO_CMAKE_PATH "$ENV{SYSTEMROOT}" SYSTEMROOT)
+
+  if(CMAKE_CL_64)
+    if(MSVC_VERSION GREATER 1599)
+      # VS 10 and later:
+      set(CMAKE_MSVC_ARCH x64)
+    else()
+      # VS 9 and earlier:
+      set(CMAKE_MSVC_ARCH amd64)
+    endif()
+  else()
+    set(CMAKE_MSVC_ARCH x86)
+  endif()
+
+  get_filename_component(devenv_dir "${CMAKE_MAKE_PROGRAM}" PATH)
+  get_filename_component(base_dir "${devenv_dir}/../.." ABSOLUTE)
+
+  if(MSVC70)
+    set(__install__libs
+      "${SYSTEMROOT}/system32/msvcp70.dll"
+      "${SYSTEMROOT}/system32/msvcr70.dll"
+      )
+  endif()
+
+  if(MSVC71)
+    set(__install__libs
+      "${SYSTEMROOT}/system32/msvcp71.dll"
+      "${SYSTEMROOT}/system32/msvcr71.dll"
+      )
+  endif()
+
+  if(MSVC80)
+    # Find the runtime library redistribution directory.
+    get_filename_component(msvc_install_dir
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\8.0;InstallDir]" ABSOLUTE)
+    find_path(MSVC80_REDIST_DIR NAMES ${CMAKE_MSVC_ARCH}/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest
+      PATHS
+        "${msvc_install_dir}/../../VC/redist"
+        "${base_dir}/VC/redist"
+      )
+    mark_as_advanced(MSVC80_REDIST_DIR)
+    set(MSVC80_CRT_DIR "${MSVC80_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC80.CRT")
+
+    # Install the manifest that allows DLLs to be loaded from the
+    # directory containing the executable.
+    if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
+      set(__install__libs
+        "${MSVC80_CRT_DIR}/Microsoft.VC80.CRT.manifest"
+        "${MSVC80_CRT_DIR}/msvcm80.dll"
+        "${MSVC80_CRT_DIR}/msvcp80.dll"
+        "${MSVC80_CRT_DIR}/msvcr80.dll"
+        )
+    else()
+      set(__install__libs)
+    endif()
+
+    if(CMAKE_INSTALL_DEBUG_LIBRARIES)
+      set(MSVC80_CRT_DIR
+        "${MSVC80_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC80.DebugCRT")
+      set(__install__libs ${__install__libs}
+        "${MSVC80_CRT_DIR}/Microsoft.VC80.DebugCRT.manifest"
+        "${MSVC80_CRT_DIR}/msvcm80d.dll"
+        "${MSVC80_CRT_DIR}/msvcp80d.dll"
+        "${MSVC80_CRT_DIR}/msvcr80d.dll"
+        )
+    endif()
+  endif()
+
+  if(MSVC90)
+    # Find the runtime library redistribution directory.
+    get_filename_component(msvc_install_dir
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\9.0;InstallDir]" ABSOLUTE)
+    get_filename_component(msvc_express_install_dir
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VCExpress\\9.0;InstallDir]" ABSOLUTE)
+    find_path(MSVC90_REDIST_DIR NAMES ${CMAKE_MSVC_ARCH}/Microsoft.VC90.CRT/Microsoft.VC90.CRT.manifest
+      PATHS
+        "${msvc_install_dir}/../../VC/redist"
+        "${msvc_express_install_dir}/../../VC/redist"
+        "${base_dir}/VC/redist"
+      )
+    mark_as_advanced(MSVC90_REDIST_DIR)
+    set(MSVC90_CRT_DIR "${MSVC90_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC90.CRT")
+
+    # Install the manifest that allows DLLs to be loaded from the
+    # directory containing the executable.
+    if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
+      set(__install__libs
+        "${MSVC90_CRT_DIR}/Microsoft.VC90.CRT.manifest"
+        "${MSVC90_CRT_DIR}/msvcm90.dll"
+        "${MSVC90_CRT_DIR}/msvcp90.dll"
+        "${MSVC90_CRT_DIR}/msvcr90.dll"
+        )
+    else()
+      set(__install__libs)
+    endif()
+
+    if(CMAKE_INSTALL_DEBUG_LIBRARIES)
+      set(MSVC90_CRT_DIR
+        "${MSVC90_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC90.DebugCRT")
+      set(__install__libs ${__install__libs}
+        "${MSVC90_CRT_DIR}/Microsoft.VC90.DebugCRT.manifest"
+        "${MSVC90_CRT_DIR}/msvcm90d.dll"
+        "${MSVC90_CRT_DIR}/msvcp90d.dll"
+        "${MSVC90_CRT_DIR}/msvcr90d.dll"
+        )
+    endif()
+  endif()
+
+  macro(MSVCRT_FILES_FOR_VERSION version)
+    set(v "${version}")
+
+    # Find the runtime library redistribution directory.
+    get_filename_component(msvc_install_dir
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\${v}.0;InstallDir]" ABSOLUTE)
+    set(programfilesx86 "ProgramFiles(x86)")
+    find_path(MSVC${v}_REDIST_DIR NAMES ${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.CRT
+      PATHS
+        "${msvc_install_dir}/../../VC/redist"
+        "${base_dir}/VC/redist"
+        "$ENV{ProgramFiles}/Microsoft Visual Studio ${v}.0/VC/redist"
+        "$ENV{${programfilesx86}}/Microsoft Visual Studio ${v}.0/VC/redist"
+      )
+    mark_as_advanced(MSVC${v}_REDIST_DIR)
+    set(MSVC${v}_CRT_DIR "${MSVC${v}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.CRT")
+
+    if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
+      set(__install__libs
+        "${MSVC${v}_CRT_DIR}/msvcp${v}0.dll"
+        )
+      if(NOT v VERSION_LESS 14)
+        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/vcruntime${v}0.dll")
+      else()
+        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/msvcr${v}0.dll")
+      endif()
+    else()
+      set(__install__libs)
+    endif()
+
+    if(CMAKE_INSTALL_DEBUG_LIBRARIES)
+      set(MSVC${v}_CRT_DIR
+        "${MSVC${v}_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.DebugCRT")
+      set(__install__libs ${__install__libs}
+        "${MSVC${v}_CRT_DIR}/msvcp${v}0d.dll"
+        )
+      if(NOT v VERSION_LESS 14)
+        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/vcruntime${v}0d.dll")
+      else()
+        list(APPEND __install__libs "${MSVC${v}_CRT_DIR}/msvcr${v}0d.dll")
+      endif()
+    endif()
+
+    if(CMAKE_INSTALL_UCRT_LIBRARIES AND NOT v VERSION_LESS 14)
+      # Find the Windows Universal CRT redistribution directory.
+      get_filename_component(windows_kits_dir
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows Kits\\Installed Roots;KitsRoot10]" ABSOLUTE)
+      set(programfilesx86 "ProgramFiles(x86)")
+      find_path(WINDOWS_KITS_REDIST_DIR NAMES ucrt/DLLs/${CMAKE_MSVC_ARCH}/ucrtbase.dll
+        PATHS
+        "${windows_kits_dir}/Redist"
+        "$ENV{ProgramFiles}/Windows Kits/10/Redist"
+        "$ENV{${programfilesx86}}/Windows Kits/10/Redist"
+        )
+      mark_as_advanced(WINDOWS_KITS_REDIST_DIR)
+
+      # Glob the list of UCRT DLLs.
+      file(GLOB __ucrt_dlls "${WINDOWS_KITS_REDIST_DIR}/ucrt/DLLs/${CMAKE_MSVC_ARCH}/*.dll")
+      list(APPEND __install__libs ${__ucrt_dlls})
+    endif()
+  endmacro()
+
+  if(MSVC10)
+    MSVCRT_FILES_FOR_VERSION(10)
+  endif()
+
+  if(MSVC11)
+    MSVCRT_FILES_FOR_VERSION(11)
+  endif()
+
+  if(MSVC12)
+    MSVCRT_FILES_FOR_VERSION(12)
+  endif()
+
+  if(MSVC14)
+    MSVCRT_FILES_FOR_VERSION(14)
+  endif()
+
+  if(CMAKE_INSTALL_MFC_LIBRARIES)
+    if(MSVC70)
+      set(__install__libs ${__install__libs}
+        "${SYSTEMROOT}/system32/mfc70.dll"
+        )
+    endif()
+
+    if(MSVC71)
+      set(__install__libs ${__install__libs}
+        "${SYSTEMROOT}/system32/mfc71.dll"
+        )
+    endif()
+
+    if(MSVC80)
+      if(CMAKE_INSTALL_DEBUG_LIBRARIES)
+        set(MSVC80_MFC_DIR
+          "${MSVC80_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC80.DebugMFC")
+        set(__install__libs ${__install__libs}
+          "${MSVC80_MFC_DIR}/Microsoft.VC80.DebugMFC.manifest"
+          "${MSVC80_MFC_DIR}/mfc80d.dll"
+          "${MSVC80_MFC_DIR}/mfc80ud.dll"
+          "${MSVC80_MFC_DIR}/mfcm80d.dll"
+          "${MSVC80_MFC_DIR}/mfcm80ud.dll"
+          )
+      endif()
+
+      set(MSVC80_MFC_DIR "${MSVC80_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC80.MFC")
+      # Install the manifest that allows DLLs to be loaded from the
+      # directory containing the executable.
+      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
+        set(__install__libs ${__install__libs}
+          "${MSVC80_MFC_DIR}/Microsoft.VC80.MFC.manifest"
+          "${MSVC80_MFC_DIR}/mfc80.dll"
+          "${MSVC80_MFC_DIR}/mfc80u.dll"
+          "${MSVC80_MFC_DIR}/mfcm80.dll"
+          "${MSVC80_MFC_DIR}/mfcm80u.dll"
+          )
+      endif()
+
+      # include the language dll's for vs8 as well as the actuall dll's
+      set(MSVC80_MFCLOC_DIR "${MSVC80_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC80.MFCLOC")
+      # Install the manifest that allows DLLs to be loaded from the
+      # directory containing the executable.
+      set(__install__libs ${__install__libs}
+        "${MSVC80_MFCLOC_DIR}/Microsoft.VC80.MFCLOC.manifest"
+        "${MSVC80_MFCLOC_DIR}/mfc80chs.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80cht.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80enu.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80esp.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80deu.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80fra.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80ita.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80jpn.dll"
+        "${MSVC80_MFCLOC_DIR}/mfc80kor.dll"
+        )
+    endif()
+
+    if(MSVC90)
+      if(CMAKE_INSTALL_DEBUG_LIBRARIES)
+        set(MSVC90_MFC_DIR
+          "${MSVC90_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC90.DebugMFC")
+        set(__install__libs ${__install__libs}
+          "${MSVC90_MFC_DIR}/Microsoft.VC90.DebugMFC.manifest"
+          "${MSVC90_MFC_DIR}/mfc90d.dll"
+          "${MSVC90_MFC_DIR}/mfc90ud.dll"
+          "${MSVC90_MFC_DIR}/mfcm90d.dll"
+          "${MSVC90_MFC_DIR}/mfcm90ud.dll"
+          )
+      endif()
+
+      set(MSVC90_MFC_DIR "${MSVC90_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC90.MFC")
+      # Install the manifest that allows DLLs to be loaded from the
+      # directory containing the executable.
+      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
+        set(__install__libs ${__install__libs}
+          "${MSVC90_MFC_DIR}/Microsoft.VC90.MFC.manifest"
+          "${MSVC90_MFC_DIR}/mfc90.dll"
+          "${MSVC90_MFC_DIR}/mfc90u.dll"
+          "${MSVC90_MFC_DIR}/mfcm90.dll"
+          "${MSVC90_MFC_DIR}/mfcm90u.dll"
+          )
+      endif()
+
+      # include the language dll's for vs9 as well as the actuall dll's
+      set(MSVC90_MFCLOC_DIR "${MSVC90_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC90.MFCLOC")
+      # Install the manifest that allows DLLs to be loaded from the
+      # directory containing the executable.
+      set(__install__libs ${__install__libs}
+        "${MSVC90_MFCLOC_DIR}/Microsoft.VC90.MFCLOC.manifest"
+        "${MSVC90_MFCLOC_DIR}/mfc90chs.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90cht.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90enu.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90esp.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90deu.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90fra.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90ita.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90jpn.dll"
+        "${MSVC90_MFCLOC_DIR}/mfc90kor.dll"
+        )
+    endif()
+
+    macro(MFC_FILES_FOR_VERSION version)
+      set(v "${version}")
+
+      # Multi-Byte Character Set versions of MFC are available as optional
+      # addon since Visual Studio 12.  So for version 12 or higher, check
+      # whether they are available and exclude them if they are not.
+
+      if(CMAKE_INSTALL_DEBUG_LIBRARIES)
+        set(MSVC${v}_MFC_DIR
+          "${MSVC${v}_REDIST_DIR}/Debug_NonRedist/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.DebugMFC")
+        set(__install__libs ${__install__libs}
+          "${MSVC${v}_MFC_DIR}/mfc${v}0ud.dll"
+          "${MSVC${v}_MFC_DIR}/mfcm${v}0ud.dll"
+          )
+        if("${v}" LESS 12 OR EXISTS "${MSVC${v}_MFC_DIR}/mfc${v}0d.dll")
+          set(__install__libs ${__install__libs}
+            "${MSVC${v}_MFC_DIR}/mfc${v}0d.dll"
+            "${MSVC${v}_MFC_DIR}/mfcm${v}0d.dll"
+          )
+        endif()
+      endif()
+
+      set(MSVC${v}_MFC_DIR "${MSVC${v}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.MFC")
+      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
+        set(__install__libs ${__install__libs}
+          "${MSVC${v}_MFC_DIR}/mfc${v}0u.dll"
+          "${MSVC${v}_MFC_DIR}/mfcm${v}0u.dll"
+          )
+        if("${v}" LESS 12 OR EXISTS "${MSVC${v}_MFC_DIR}/mfc${v}0.dll")
+          set(__install__libs ${__install__libs}
+            "${MSVC${v}_MFC_DIR}/mfc${v}0.dll"
+            "${MSVC${v}_MFC_DIR}/mfcm${v}0.dll"
+          )
+        endif()
+      endif()
+
+      # include the language dll's as well as the actuall dll's
+      set(MSVC${v}_MFCLOC_DIR "${MSVC${v}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${v}0.MFCLOC")
+      set(__install__libs ${__install__libs}
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0chs.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0cht.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0deu.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0enu.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0esn.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0fra.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0ita.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0jpn.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0kor.dll"
+        "${MSVC${v}_MFCLOC_DIR}/mfc${v}0rus.dll"
+        )
+    endmacro()
+
+    if(MSVC10)
+      MFC_FILES_FOR_VERSION(10)
+    endif()
+
+    if(MSVC11)
+      MFC_FILES_FOR_VERSION(11)
+    endif()
+
+    if(MSVC12)
+      MFC_FILES_FOR_VERSION(12)
+    endif()
+
+    if(MSVC14)
+      MFC_FILES_FOR_VERSION(14)
+    endif()
+  endif()
+
+  # MSVC 8 was the first version with OpenMP
+  # Furthermore, there is no debug version of this
+  if(CMAKE_INSTALL_OPENMP_LIBRARIES)
+    macro(OPENMP_FILES_FOR_VERSION version_a version_b)
+      set(va "${version_a}")
+      set(vb "${version_b}")
+      set(MSVC${va}_OPENMP_DIR "${MSVC${va}_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC${vb}.OPENMP")
+
+      if(NOT CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY)
+        set(__install__libs ${__install__libs}
+          "${MSVC${va}_OPENMP_DIR}/vcomp${vb}.dll")
+      endif()
+    endmacro()
+
+    if(MSVC80)
+      OPENMP_FILES_FOR_VERSION(80 80)
+    endif()
+    if(MSVC90)
+      OPENMP_FILES_FOR_VERSION(90 90)
+    endif()
+    if(MSVC10)
+      OPENMP_FILES_FOR_VERSION(10 100)
+    endif()
+    if(MSVC11)
+      OPENMP_FILES_FOR_VERSION(11 110)
+    endif()
+    if(MSVC12)
+      OPENMP_FILES_FOR_VERSION(12 120)
+    endif()
+    if(MSVC14)
+      OPENMP_FILES_FOR_VERSION(14 140)
+    endif()
+  endif()
+
+  foreach(lib
+      ${__install__libs}
+      )
+    if(EXISTS ${lib})
+      set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS
+        ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS} ${lib})
+    else()
+      if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS)
+        message(WARNING "system runtime library file does not exist: '${lib}'")
+        # This warning indicates an incomplete Visual Studio installation
+        # or a bug somewhere above here in this file.
+        # If you would like to avoid this warning, fix the real problem, or
+        # set CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS before including
+        # this file.
+      endif()
+    endif()
+  endforeach()
+endif()
+
+if(WATCOM)
+  get_filename_component( CompilerPath ${CMAKE_C_COMPILER} PATH )
+  if(CMAKE_C_COMPILER_VERSION)
+    set(_compiler_version ${CMAKE_C_COMPILER_VERSION})
+  else()
+    set(_compiler_version ${CMAKE_CXX_COMPILER_VERSION})
+  endif()
+  string(REGEX MATCHALL "[0-9]+" _watcom_version_list "${_compiler_version}")
+  list(GET _watcom_version_list 0 _watcom_major)
+  list(GET _watcom_version_list 1 _watcom_minor)
+  set( __install__libs
+    ${CompilerPath}/clbr${_watcom_major}${_watcom_minor}.dll
+    ${CompilerPath}/mt7r${_watcom_major}${_watcom_minor}.dll
+    ${CompilerPath}/plbr${_watcom_major}${_watcom_minor}.dll )
+  foreach(lib
+      ${__install__libs}
+      )
+    if(EXISTS ${lib})
+      set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS
+        ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS} ${lib})
+    else()
+      if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS)
+        message(WARNING "system runtime library file does not exist: '${lib}'")
+        # This warning indicates an incomplete Watcom installation
+        # or a bug somewhere above here in this file.
+        # If you would like to avoid this warning, fix the real problem, or
+        # set CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS before including
+        # this file.
+      endif()
+    endif()
+  endforeach()
+endif()
+
+
+# Include system runtime libraries in the installation if any are
+# specified by CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS.
+if(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS)
+  if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP)
+    if(NOT CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION)
+      if(WIN32)
+        set(CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION bin)
+      else()
+        set(CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION lib)
+      endif()
+    endif()
+    if(CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT)
+      set(_CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT
+        COMPONENT ${CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT})
+    endif()
+    install(PROGRAMS ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS}
+      DESTINATION ${CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION}
+      ${_CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT}
+      )
+  endif()
+endif()
diff --git a/share/cmake-3.2/Modules/IntelVSImplicitPath/CMakeLists.txt b/share/cmake-3.6/Modules/IntelVSImplicitPath/CMakeLists.txt
similarity index 100%
rename from share/cmake-3.2/Modules/IntelVSImplicitPath/CMakeLists.txt
rename to share/cmake-3.6/Modules/IntelVSImplicitPath/CMakeLists.txt
diff --git a/share/cmake-3.2/Modules/IntelVSImplicitPath/detect.cmake b/share/cmake-3.6/Modules/IntelVSImplicitPath/detect.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/IntelVSImplicitPath/detect.cmake
rename to share/cmake-3.6/Modules/IntelVSImplicitPath/detect.cmake
diff --git a/share/cmake-3.2/Modules/IntelVSImplicitPath/hello.f b/share/cmake-3.6/Modules/IntelVSImplicitPath/hello.f
similarity index 100%
rename from share/cmake-3.2/Modules/IntelVSImplicitPath/hello.f
rename to share/cmake-3.6/Modules/IntelVSImplicitPath/hello.f
diff --git a/share/cmake-3.6/Modules/Internal/FeatureTesting.cmake b/share/cmake-3.6/Modules/Internal/FeatureTesting.cmake
new file mode 100644
index 0000000..86b89b2
--- /dev/null
+++ b/share/cmake-3.6/Modules/Internal/FeatureTesting.cmake
@@ -0,0 +1,60 @@
+
+macro(record_compiler_features lang compile_flags feature_list)
+  include("${CMAKE_ROOT}/Modules/Compiler/${CMAKE_${lang}_COMPILER_ID}-${lang}-FeatureTests.cmake" OPTIONAL)
+
+  string(TOLOWER ${lang} lang_lc)
+  file(REMOVE "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin")
+  file(WRITE "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}" "
+  const char features[] = {\"\\n\"\n")
+
+  get_property(known_features GLOBAL PROPERTY CMAKE_${lang}_KNOWN_FEATURES)
+
+  foreach(feature ${known_features})
+    if (_cmake_feature_test_${feature})
+      if (${_cmake_feature_test_${feature}} STREQUAL 1)
+        set(_feature_condition "\"1\" ")
+      else()
+        set(_feature_condition "#if ${_cmake_feature_test_${feature}}\n\"1\"\n#else\n\"0\"\n#endif\n")
+      endif()
+      file(APPEND "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}" "\"${lang}_FEATURE:\"\n${_feature_condition}\"${feature}\\n\"\n")
+    endif()
+  endforeach()
+  file(APPEND "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}"
+    "\n};\n\nint main(int argc, char** argv) { (void)argv; return features[argc]; }\n")
+
+  try_compile(CMAKE_${lang}_FEATURE_TEST
+    ${CMAKE_BINARY_DIR} "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.${lang_lc}"
+    COMPILE_DEFINITIONS "${compile_flags}"
+    OUTPUT_VARIABLE _output
+    COPY_FILE "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin"
+    COPY_FILE_ERROR _copy_error
+    )
+  if(CMAKE_${lang}_FEATURE_TEST AND NOT _copy_error)
+    set(_result 0)
+  else()
+    set(_result 255)
+  endif()
+  unset(CMAKE_${lang}_FEATURE_TEST CACHE)
+
+  if (_result EQUAL 0)
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+      "\n\nDetecting ${lang} [${compile_flags}] compiler features compiled with the following output:\n${_output}\n\n")
+    if(EXISTS "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin")
+      file(STRINGS "${CMAKE_BINARY_DIR}/CMakeFiles/feature_tests.bin"
+        features REGEX "${lang}_FEATURE:.*")
+      foreach(info ${features})
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+          "    Feature record: ${info}\n")
+        string(REPLACE "${lang}_FEATURE:" "" info ${info})
+        string(SUBSTRING ${info} 0 1 has_feature)
+        if(has_feature)
+          string(REGEX REPLACE "^1" "" feature ${info})
+          list(APPEND ${feature_list} ${feature})
+        endif()
+      endforeach()
+    endif()
+  else()
+    file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+      "Detecting ${lang} [${compile_flags}] compiler features failed to compile with the following output:\n${_output}\n${_copy_error}\n\n")
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/KDE3Macros.cmake b/share/cmake-3.6/Modules/KDE3Macros.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/KDE3Macros.cmake
rename to share/cmake-3.6/Modules/KDE3Macros.cmake
diff --git a/share/cmake-3.6/Modules/MacOSXBundleInfo.plist.in b/share/cmake-3.6/Modules/MacOSXBundleInfo.plist.in
new file mode 100644
index 0000000..a4009bc
--- /dev/null
+++ b/share/cmake-3.6/Modules/MacOSXBundleInfo.plist.in
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>CFBundleDevelopmentRegion</key>
+	<string>English</string>
+	<key>CFBundleExecutable</key>
+	<string>${MACOSX_BUNDLE_EXECUTABLE_NAME}</string>
+	<key>CFBundleGetInfoString</key>
+	<string>${MACOSX_BUNDLE_INFO_STRING}</string>
+	<key>CFBundleIconFile</key>
+	<string>${MACOSX_BUNDLE_ICON_FILE}</string>
+	<key>CFBundleIdentifier</key>
+	<string>${MACOSX_BUNDLE_GUI_IDENTIFIER}</string>
+	<key>CFBundleInfoDictionaryVersion</key>
+	<string>6.0</string>
+	<key>CFBundleLongVersionString</key>
+	<string>${MACOSX_BUNDLE_LONG_VERSION_STRING}</string>
+	<key>CFBundleName</key>
+	<string>${MACOSX_BUNDLE_BUNDLE_NAME}</string>
+	<key>CFBundlePackageType</key>
+	<string>APPL</string>
+	<key>CFBundleShortVersionString</key>
+	<string>${MACOSX_BUNDLE_SHORT_VERSION_STRING}</string>
+	<key>CFBundleSignature</key>
+	<string>????</string>
+	<key>CFBundleVersion</key>
+	<string>${MACOSX_BUNDLE_BUNDLE_VERSION}</string>
+	<key>CSResourcesFileMapped</key>
+	<true/>
+	<key>NSHumanReadableCopyright</key>
+	<string>${MACOSX_BUNDLE_COPYRIGHT}</string>
+</dict>
+</plist>
diff --git a/share/cmake-3.2/Modules/MacOSXFrameworkInfo.plist.in b/share/cmake-3.6/Modules/MacOSXFrameworkInfo.plist.in
similarity index 100%
rename from share/cmake-3.2/Modules/MacOSXFrameworkInfo.plist.in
rename to share/cmake-3.6/Modules/MacOSXFrameworkInfo.plist.in
diff --git a/share/cmake-3.2/Modules/MacroAddFileDependencies.cmake b/share/cmake-3.6/Modules/MacroAddFileDependencies.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/MacroAddFileDependencies.cmake
rename to share/cmake-3.6/Modules/MacroAddFileDependencies.cmake
diff --git a/share/cmake-3.6/Modules/MatlabTestsRedirect.cmake b/share/cmake-3.6/Modules/MatlabTestsRedirect.cmake
new file mode 100644
index 0000000..77b7afe
--- /dev/null
+++ b/share/cmake-3.6/Modules/MatlabTestsRedirect.cmake
@@ -0,0 +1,91 @@
+# This is an undocumented internal helper for the FindMatlab
+# module ``matlab_add_unit_test`` command.
+
+#=============================================================================
+# Copyright 2014-2015 Raffi Enficiaud, Max Planck Society
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+# Usage: cmake
+#   -Dtest_timeout=180
+#   -Doutput_directory=
+#   -Dadditional_paths=""
+#   -Dno_unittest_framework=""
+#   -DMatlab_PROGRAM=matlab_exe_location
+#   -DMatlab_ADDITIONNAL_STARTUP_OPTIONS=""
+#   -Dtest_name=name_of_the_test
+#   -Dcmd_to_run_before_test=""
+#   -Dunittest_file_to_run
+#   -P FindMatlab_TestsRedirect.cmake
+
+set(Matlab_UNIT_TESTS_CMD -nosplash -nojvm -nodesktop -nodisplay ${Matlab_ADDITIONNAL_STARTUP_OPTIONS})
+if(WIN32)
+  set(Matlab_UNIT_TESTS_CMD ${Matlab_UNIT_TESTS_CMD} -wait)
+endif()
+
+if(NOT test_timeout)
+  set(test_timeout 180)
+endif()
+
+if(NOT cmd_to_run_before_test)
+  set(cmd_to_run_before_test)
+endif()
+
+get_filename_component(unittest_file_directory   "${unittest_file_to_run}" DIRECTORY)
+get_filename_component(unittest_file_to_run_name "${unittest_file_to_run}" NAME_WE)
+
+set(concat_string '${unittest_file_directory}')
+foreach(s IN LISTS additional_paths)
+  if(NOT "${s}" STREQUAL "")
+    set(concat_string "${concat_string}, '${s}'")
+  endif()
+endforeach()
+
+set(unittest_to_run "runtests('${unittest_file_to_run_name}'), exit(max([ans(1,:).Failed]))")
+if(no_unittest_framework)
+  set(unittest_to_run "try, ${unittest_file_to_run_name}, catch err, disp('An exception has been thrown during the execution'), disp(err), disp(err.stack), exit(1), end, exit(0)")
+endif()
+
+set(Matlab_SCRIPT_TO_RUN
+    "addpath(${concat_string}), path, ${cmd_to_run_before_test}, ${unittest_to_run}"
+   )
+
+set(Matlab_LOG_FILE "${output_directory}/${test_name}.log")
+
+set(devnull)
+if(UNIX)
+  set(devnull INPUT_FILE /dev/null)
+elseif(WIN32)
+  set(devnull INPUT_FILE NUL)
+endif()
+
+execute_process(
+  COMMAND "${Matlab_PROGRAM}" ${Matlab_UNIT_TESTS_CMD} -logfile "${test_name}.log" -r "${Matlab_SCRIPT_TO_RUN}"
+  RESULT_VARIABLE res
+  TIMEOUT ${test_timeout}
+  OUTPUT_QUIET # we do not want the output twice
+  WORKING_DIRECTORY "${output_directory}"
+  ${devnull}
+  )
+
+if(NOT EXISTS ${Matlab_LOG_FILE})
+  message( FATAL_ERROR "[MATLAB] ERROR: cannot find the log file ${Matlab_LOG_FILE}")
+endif()
+
+# print the output in any case.
+file(READ ${Matlab_LOG_FILE} matlab_log_content)
+message("Matlab test ${name_of_the_test} output:\n${matlab_log_content}") # if we put FATAL_ERROR here, the file is indented.
+
+
+if(NOT (res EQUAL 0))
+  message( FATAL_ERROR "[MATLAB] TEST FAILED" )
+endif()
diff --git a/share/cmake-3.2/Modules/NSIS.InstallOptions.ini.in b/share/cmake-3.6/Modules/NSIS.InstallOptions.ini.in
similarity index 100%
rename from share/cmake-3.2/Modules/NSIS.InstallOptions.ini.in
rename to share/cmake-3.6/Modules/NSIS.InstallOptions.ini.in
diff --git a/share/cmake-3.6/Modules/NSIS.template.in b/share/cmake-3.6/Modules/NSIS.template.in
new file mode 100644
index 0000000..1ef3d28
--- /dev/null
+++ b/share/cmake-3.6/Modules/NSIS.template.in
@@ -0,0 +1,979 @@
+; CPack install script designed for a nmake build
+
+;--------------------------------
+; You must define these values
+
+  !define VERSION "@CPACK_PACKAGE_VERSION@"
+  !define PATCH  "@CPACK_PACKAGE_VERSION_PATCH@"
+  !define INST_DIR "@CPACK_TEMPORARY_DIRECTORY@"
+
+;--------------------------------
+;Variables
+
+  Var MUI_TEMP
+  Var STARTMENU_FOLDER
+  Var SV_ALLUSERS
+  Var START_MENU
+  Var DO_NOT_ADD_TO_PATH
+  Var ADD_TO_PATH_ALL_USERS
+  Var ADD_TO_PATH_CURRENT_USER
+  Var INSTALL_DESKTOP
+  Var IS_DEFAULT_INSTALLDIR
+;--------------------------------
+;Include Modern UI
+
+  !include "MUI.nsh"
+
+  ;Default installation folder
+  InstallDir "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
+
+;--------------------------------
+;General
+
+  ;Name and file
+  Name "@CPACK_NSIS_PACKAGE_NAME@"
+  OutFile "@CPACK_TOPLEVEL_DIRECTORY@/@CPACK_OUTPUT_FILE_NAME@"
+
+  ;Set compression
+  SetCompressor @CPACK_NSIS_COMPRESSOR@
+
+  ;Require administrator access
+  RequestExecutionLevel admin
+
+@CPACK_NSIS_DEFINES@
+
+  !include Sections.nsh
+
+;--- Component support macros: ---
+; The code for the add/remove functionality is from:
+;   http://nsis.sourceforge.net/Add/Remove_Functionality
+; It has been modified slightly and extended to provide
+; inter-component dependencies.
+Var AR_SecFlags
+Var AR_RegFlags
+@CPACK_NSIS_SECTION_SELECTED_VARS@
+
+; Loads the "selected" flag for the section named SecName into the
+; variable VarName.
+!macro LoadSectionSelectedIntoVar SecName VarName
+ SectionGetFlags ${${SecName}} $${VarName}
+ IntOp $${VarName} $${VarName} & ${SF_SELECTED}  ;Turn off all other bits
+!macroend
+
+; Loads the value of a variable... can we get around this?
+!macro LoadVar VarName
+  IntOp $R0 0 + $${VarName}
+!macroend
+
+; Sets the value of a variable
+!macro StoreVar VarName IntValue
+  IntOp $${VarName} 0 + ${IntValue}
+!macroend
+
+!macro InitSection SecName
+  ;  This macro reads component installed flag from the registry and
+  ;changes checked state of the section on the components page.
+  ;Input: section index constant name specified in Section command.
+
+  ClearErrors
+  ;Reading component status from registry
+  ReadRegDWORD $AR_RegFlags HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" "Installed"
+  IfErrors "default_${SecName}"
+    ;Status will stay default if registry value not found
+    ;(component was never installed)
+  IntOp $AR_RegFlags $AR_RegFlags & ${SF_SELECTED} ;Turn off all other bits
+  SectionGetFlags ${${SecName}} $AR_SecFlags  ;Reading default section flags
+  IntOp $AR_SecFlags $AR_SecFlags & 0xFFFE  ;Turn lowest (enabled) bit off
+  IntOp $AR_SecFlags $AR_RegFlags | $AR_SecFlags      ;Change lowest bit
+
+  ; Note whether this component was installed before
+  !insertmacro StoreVar ${SecName}_was_installed $AR_RegFlags
+  IntOp $R0 $AR_RegFlags & $AR_RegFlags
+
+  ;Writing modified flags
+  SectionSetFlags ${${SecName}} $AR_SecFlags
+
+ "default_${SecName}:"
+ !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
+!macroend
+
+!macro FinishSection SecName
+  ;  This macro reads section flag set by user and removes the section
+  ;if it is not selected.
+  ;Then it writes component installed flag to registry
+  ;Input: section index constant name specified in Section command.
+
+  SectionGetFlags ${${SecName}} $AR_SecFlags  ;Reading section flags
+  ;Checking lowest bit:
+  IntOp $AR_SecFlags $AR_SecFlags & ${SF_SELECTED}
+  IntCmp $AR_SecFlags 1 "leave_${SecName}"
+    ;Section is not selected:
+    ;Calling Section uninstall macro and writing zero installed flag
+    !insertmacro "Remove_${${SecName}}"
+    WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \
+  "Installed" 0
+    Goto "exit_${SecName}"
+
+ "leave_${SecName}:"
+    ;Section is selected:
+    WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \
+  "Installed" 1
+
+ "exit_${SecName}:"
+!macroend
+
+!macro RemoveSection_CPack SecName
+  ;  This macro is used to call section's Remove_... macro
+  ;from the uninstaller.
+  ;Input: section index constant name specified in Section command.
+
+  !insertmacro "Remove_${${SecName}}"
+!macroend
+
+; Determine whether the selection of SecName changed
+!macro MaybeSelectionChanged SecName
+  !insertmacro LoadVar ${SecName}_selected
+  SectionGetFlags ${${SecName}} $R1
+  IntOp $R1 $R1 & ${SF_SELECTED} ;Turn off all other bits
+
+  ; See if the status has changed:
+  IntCmp $R0 $R1 "${SecName}_unchanged"
+  !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
+
+  IntCmp $R1 ${SF_SELECTED} "${SecName}_was_selected"
+  !insertmacro "Deselect_required_by_${SecName}"
+  goto "${SecName}_unchanged"
+
+  "${SecName}_was_selected:"
+  !insertmacro "Select_${SecName}_depends"
+
+  "${SecName}_unchanged:"
+!macroend
+;--- End of Add/Remove macros ---
+
+;--------------------------------
+;Interface Settings
+
+  !define MUI_HEADERIMAGE
+  !define MUI_ABORTWARNING
+
+;--------------------------------
+; path functions
+
+!verbose 3
+!include "WinMessages.NSH"
+!verbose 4
+
+;----------------------------------------
+; based upon a script of "Written by KiCHiK 2003-01-18 05:57:02"
+;----------------------------------------
+!verbose 3
+!include "WinMessages.NSH"
+!verbose 4
+;====================================================
+; get_NT_environment
+;     Returns: the selected environment
+;     Output : head of the stack
+;====================================================
+!macro select_NT_profile UN
+Function ${UN}select_NT_profile
+   StrCmp $ADD_TO_PATH_ALL_USERS "1" 0 environment_single
+      DetailPrint "Selected environment for all users"
+      Push "all"
+      Return
+   environment_single:
+      DetailPrint "Selected environment for current user only."
+      Push "current"
+      Return
+FunctionEnd
+!macroend
+!insertmacro select_NT_profile ""
+!insertmacro select_NT_profile "un."
+;----------------------------------------------------
+!define NT_current_env 'HKCU "Environment"'
+!define NT_all_env     'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"'
+
+!ifndef WriteEnvStr_RegKey
+  !ifdef ALL_USERS
+    !define WriteEnvStr_RegKey \
+       'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"'
+  !else
+    !define WriteEnvStr_RegKey 'HKCU "Environment"'
+  !endif
+!endif
+
+; AddToPath - Adds the given dir to the search path.
+;        Input - head of the stack
+;        Note - Win9x systems requires reboot
+
+Function AddToPath
+  Exch $0
+  Push $1
+  Push $2
+  Push $3
+
+  # don't add if the path doesn't exist
+  IfFileExists "$0\*.*" "" AddToPath_done
+
+  ReadEnvStr $1 PATH
+  ; if the path is too long for a NSIS variable NSIS will return a 0
+  ; length string.  If we find that, then warn and skip any path
+  ; modification as it will trash the existing path.
+  StrLen $2 $1
+  IntCmp $2 0 CheckPathLength_ShowPathWarning CheckPathLength_Done CheckPathLength_Done
+    CheckPathLength_ShowPathWarning:
+    Messagebox MB_OK|MB_ICONEXCLAMATION "Warning! PATH too long installer unable to modify PATH!"
+    Goto AddToPath_done
+  CheckPathLength_Done:
+  Push "$1;"
+  Push "$0;"
+  Call StrStr
+  Pop $2
+  StrCmp $2 "" "" AddToPath_done
+  Push "$1;"
+  Push "$0\;"
+  Call StrStr
+  Pop $2
+  StrCmp $2 "" "" AddToPath_done
+  GetFullPathName /SHORT $3 $0
+  Push "$1;"
+  Push "$3;"
+  Call StrStr
+  Pop $2
+  StrCmp $2 "" "" AddToPath_done
+  Push "$1;"
+  Push "$3\;"
+  Call StrStr
+  Pop $2
+  StrCmp $2 "" "" AddToPath_done
+
+  Call IsNT
+  Pop $1
+  StrCmp $1 1 AddToPath_NT
+    ; Not on NT
+    StrCpy $1 $WINDIR 2
+    FileOpen $1 "$1\autoexec.bat" a
+    FileSeek $1 -1 END
+    FileReadByte $1 $2
+    IntCmp $2 26 0 +2 +2 # DOS EOF
+      FileSeek $1 -1 END # write over EOF
+    FileWrite $1 "$\r$\nSET PATH=%PATH%;$3$\r$\n"
+    FileClose $1
+    SetRebootFlag true
+    Goto AddToPath_done
+
+  AddToPath_NT:
+    StrCmp $ADD_TO_PATH_ALL_USERS "1" ReadAllKey
+      ReadRegStr $1 ${NT_current_env} "PATH"
+      Goto DoTrim
+    ReadAllKey:
+      ReadRegStr $1 ${NT_all_env} "PATH"
+    DoTrim:
+    StrCmp $1 "" AddToPath_NTdoIt
+      Push $1
+      Call Trim
+      Pop $1
+      StrCpy $0 "$1;$0"
+    AddToPath_NTdoIt:
+      StrCmp $ADD_TO_PATH_ALL_USERS "1" WriteAllKey
+        WriteRegExpandStr ${NT_current_env} "PATH" $0
+        Goto DoSend
+      WriteAllKey:
+        WriteRegExpandStr ${NT_all_env} "PATH" $0
+      DoSend:
+      SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
+
+  AddToPath_done:
+    Pop $3
+    Pop $2
+    Pop $1
+    Pop $0
+FunctionEnd
+
+
+; RemoveFromPath - Remove a given dir from the path
+;     Input: head of the stack
+
+Function un.RemoveFromPath
+  Exch $0
+  Push $1
+  Push $2
+  Push $3
+  Push $4
+  Push $5
+  Push $6
+
+  IntFmt $6 "%c" 26 # DOS EOF
+
+  Call un.IsNT
+  Pop $1
+  StrCmp $1 1 unRemoveFromPath_NT
+    ; Not on NT
+    StrCpy $1 $WINDIR 2
+    FileOpen $1 "$1\autoexec.bat" r
+    GetTempFileName $4
+    FileOpen $2 $4 w
+    GetFullPathName /SHORT $0 $0
+    StrCpy $0 "SET PATH=%PATH%;$0"
+    Goto unRemoveFromPath_dosLoop
+
+    unRemoveFromPath_dosLoop:
+      FileRead $1 $3
+      StrCpy $5 $3 1 -1 # read last char
+      StrCmp $5 $6 0 +2 # if DOS EOF
+        StrCpy $3 $3 -1 # remove DOS EOF so we can compare
+      StrCmp $3 "$0$\r$\n" unRemoveFromPath_dosLoopRemoveLine
+      StrCmp $3 "$0$\n" unRemoveFromPath_dosLoopRemoveLine
+      StrCmp $3 "$0" unRemoveFromPath_dosLoopRemoveLine
+      StrCmp $3 "" unRemoveFromPath_dosLoopEnd
+      FileWrite $2 $3
+      Goto unRemoveFromPath_dosLoop
+      unRemoveFromPath_dosLoopRemoveLine:
+        SetRebootFlag true
+        Goto unRemoveFromPath_dosLoop
+
+    unRemoveFromPath_dosLoopEnd:
+      FileClose $2
+      FileClose $1
+      StrCpy $1 $WINDIR 2
+      Delete "$1\autoexec.bat"
+      CopyFiles /SILENT $4 "$1\autoexec.bat"
+      Delete $4
+      Goto unRemoveFromPath_done
+
+  unRemoveFromPath_NT:
+    StrCmp $ADD_TO_PATH_ALL_USERS "1" unReadAllKey
+      ReadRegStr $1 ${NT_current_env} "PATH"
+      Goto unDoTrim
+    unReadAllKey:
+      ReadRegStr $1 ${NT_all_env} "PATH"
+    unDoTrim:
+    StrCpy $5 $1 1 -1 # copy last char
+    StrCmp $5 ";" +2 # if last char != ;
+      StrCpy $1 "$1;" # append ;
+    Push $1
+    Push "$0;"
+    Call un.StrStr ; Find `$0;` in $1
+    Pop $2 ; pos of our dir
+    StrCmp $2 "" unRemoveFromPath_done
+      ; else, it is in path
+      # $0 - path to add
+      # $1 - path var
+      StrLen $3 "$0;"
+      StrLen $4 $2
+      StrCpy $5 $1 -$4 # $5 is now the part before the path to remove
+      StrCpy $6 $2 "" $3 # $6 is now the part after the path to remove
+      StrCpy $3 $5$6
+
+      StrCpy $5 $3 1 -1 # copy last char
+      StrCmp $5 ";" 0 +2 # if last char == ;
+        StrCpy $3 $3 -1 # remove last char
+
+      StrCmp $ADD_TO_PATH_ALL_USERS "1" unWriteAllKey
+        WriteRegExpandStr ${NT_current_env} "PATH" $3
+        Goto unDoSend
+      unWriteAllKey:
+        WriteRegExpandStr ${NT_all_env} "PATH" $3
+      unDoSend:
+      SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
+
+  unRemoveFromPath_done:
+    Pop $6
+    Pop $5
+    Pop $4
+    Pop $3
+    Pop $2
+    Pop $1
+    Pop $0
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Uninstall sutff
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+###########################################
+#            Utility Functions            #
+###########################################
+
+;====================================================
+; IsNT - Returns 1 if the current system is NT, 0
+;        otherwise.
+;     Output: head of the stack
+;====================================================
+; IsNT
+; no input
+; output, top of the stack = 1 if NT or 0 if not
+;
+; Usage:
+;   Call IsNT
+;   Pop $R0
+;  ($R0 at this point is 1 or 0)
+
+!macro IsNT un
+Function ${un}IsNT
+  Push $0
+  ReadRegStr $0 HKLM "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion
+  StrCmp $0 "" 0 IsNT_yes
+  ; we are not NT.
+  Pop $0
+  Push 0
+  Return
+
+  IsNT_yes:
+    ; NT!!!
+    Pop $0
+    Push 1
+FunctionEnd
+!macroend
+!insertmacro IsNT ""
+!insertmacro IsNT "un."
+
+; StrStr
+; input, top of stack = string to search for
+;        top of stack-1 = string to search in
+; output, top of stack (replaces with the portion of the string remaining)
+; modifies no other variables.
+;
+; Usage:
+;   Push "this is a long ass string"
+;   Push "ass"
+;   Call StrStr
+;   Pop $R0
+;  ($R0 at this point is "ass string")
+
+!macro StrStr un
+Function ${un}StrStr
+Exch $R1 ; st=haystack,old$R1, $R1=needle
+  Exch    ; st=old$R1,haystack
+  Exch $R2 ; st=old$R1,old$R2, $R2=haystack
+  Push $R3
+  Push $R4
+  Push $R5
+  StrLen $R3 $R1
+  StrCpy $R4 0
+  ; $R1=needle
+  ; $R2=haystack
+  ; $R3=len(needle)
+  ; $R4=cnt
+  ; $R5=tmp
+  loop:
+    StrCpy $R5 $R2 $R3 $R4
+    StrCmp $R5 $R1 done
+    StrCmp $R5 "" done
+    IntOp $R4 $R4 + 1
+    Goto loop
+done:
+  StrCpy $R1 $R2 "" $R4
+  Pop $R5
+  Pop $R4
+  Pop $R3
+  Pop $R2
+  Exch $R1
+FunctionEnd
+!macroend
+!insertmacro StrStr ""
+!insertmacro StrStr "un."
+
+Function Trim ; Added by Pelaca
+	Exch $R1
+	Push $R2
+Loop:
+	StrCpy $R2 "$R1" 1 -1
+	StrCmp "$R2" " " RTrim
+	StrCmp "$R2" "$\n" RTrim
+	StrCmp "$R2" "$\r" RTrim
+	StrCmp "$R2" ";" RTrim
+	GoTo Done
+RTrim:
+	StrCpy $R1 "$R1" -1
+	Goto Loop
+Done:
+	Pop $R2
+	Exch $R1
+FunctionEnd
+
+Function ConditionalAddToRegisty
+  Pop $0
+  Pop $1
+  StrCmp "$0" "" ConditionalAddToRegisty_EmptyString
+    WriteRegStr SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" \
+    "$1" "$0"
+    ;MessageBox MB_OK "Set Registry: '$1' to '$0'"
+    DetailPrint "Set install registry entry: '$1' to '$0'"
+  ConditionalAddToRegisty_EmptyString:
+FunctionEnd
+
+;--------------------------------
+
+!ifdef CPACK_USES_DOWNLOAD
+Function DownloadFile
+    IfFileExists $INSTDIR\* +2
+    CreateDirectory $INSTDIR
+    Pop $0
+
+    ; Skip if already downloaded
+    IfFileExists $INSTDIR\$0 0 +2
+    Return
+
+    StrCpy $1 "@CPACK_DOWNLOAD_SITE@"
+
+  try_again:
+    NSISdl::download "$1/$0" "$INSTDIR\$0"
+
+    Pop $1
+    StrCmp $1 "success" success
+    StrCmp $1 "Cancelled" cancel
+    MessageBox MB_OK "Download failed: $1"
+  cancel:
+    Return
+  success:
+FunctionEnd
+!endif
+
+;--------------------------------
+; Installation types
+@CPACK_NSIS_INSTALLATION_TYPES@
+
+;--------------------------------
+; Component sections
+@CPACK_NSIS_COMPONENT_SECTIONS@
+
+;--------------------------------
+; Define some macro setting for the gui
+@CPACK_NSIS_INSTALLER_MUI_ICON_CODE@
+@CPACK_NSIS_INSTALLER_ICON_CODE@
+@CPACK_NSIS_INSTALLER_MUI_WELCOMEFINISH_CODE@
+@CPACK_NSIS_INSTALLER_MUI_UNWELCOMEFINISH_CODE@
+@CPACK_NSIS_INSTALLER_MUI_COMPONENTS_DESC@
+@CPACK_NSIS_INSTALLER_MUI_FINISHPAGE_RUN_CODE@
+
+;--------------------------------
+;Pages
+  !insertmacro MUI_PAGE_WELCOME
+
+  !insertmacro MUI_PAGE_LICENSE "@CPACK_RESOURCE_FILE_LICENSE@"
+  Page custom InstallOptionsPage
+  !insertmacro MUI_PAGE_DIRECTORY
+
+  ;Start Menu Folder Page Configuration
+  !define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX"
+  !define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
+  !define MUI_STARTMENUPAGE_REGISTRY_VALUENAME "Start Menu Folder"
+  !insertmacro MUI_PAGE_STARTMENU Application $STARTMENU_FOLDER
+
+  @CPACK_NSIS_PAGE_COMPONENTS@
+
+  !insertmacro MUI_PAGE_INSTFILES
+  !insertmacro MUI_PAGE_FINISH
+
+  !insertmacro MUI_UNPAGE_CONFIRM
+  !insertmacro MUI_UNPAGE_INSTFILES
+
+;--------------------------------
+;Languages
+
+  !insertmacro MUI_LANGUAGE "English" ;first language is the default language
+  !insertmacro MUI_LANGUAGE "Albanian"
+  !insertmacro MUI_LANGUAGE "Arabic"
+  !insertmacro MUI_LANGUAGE "Basque"
+  !insertmacro MUI_LANGUAGE "Belarusian"
+  !insertmacro MUI_LANGUAGE "Bosnian"
+  !insertmacro MUI_LANGUAGE "Breton"
+  !insertmacro MUI_LANGUAGE "Bulgarian"
+  !insertmacro MUI_LANGUAGE "Croatian"
+  !insertmacro MUI_LANGUAGE "Czech"
+  !insertmacro MUI_LANGUAGE "Danish"
+  !insertmacro MUI_LANGUAGE "Dutch"
+  !insertmacro MUI_LANGUAGE "Estonian"
+  !insertmacro MUI_LANGUAGE "Farsi"
+  !insertmacro MUI_LANGUAGE "Finnish"
+  !insertmacro MUI_LANGUAGE "French"
+  !insertmacro MUI_LANGUAGE "German"
+  !insertmacro MUI_LANGUAGE "Greek"
+  !insertmacro MUI_LANGUAGE "Hebrew"
+  !insertmacro MUI_LANGUAGE "Hungarian"
+  !insertmacro MUI_LANGUAGE "Icelandic"
+  !insertmacro MUI_LANGUAGE "Indonesian"
+  !insertmacro MUI_LANGUAGE "Irish"
+  !insertmacro MUI_LANGUAGE "Italian"
+  !insertmacro MUI_LANGUAGE "Japanese"
+  !insertmacro MUI_LANGUAGE "Korean"
+  !insertmacro MUI_LANGUAGE "Kurdish"
+  !insertmacro MUI_LANGUAGE "Latvian"
+  !insertmacro MUI_LANGUAGE "Lithuanian"
+  !insertmacro MUI_LANGUAGE "Luxembourgish"
+  !insertmacro MUI_LANGUAGE "Macedonian"
+  !insertmacro MUI_LANGUAGE "Malay"
+  !insertmacro MUI_LANGUAGE "Mongolian"
+  !insertmacro MUI_LANGUAGE "Norwegian"
+  !insertmacro MUI_LANGUAGE "Polish"
+  !insertmacro MUI_LANGUAGE "Portuguese"
+  !insertmacro MUI_LANGUAGE "PortugueseBR"
+  !insertmacro MUI_LANGUAGE "Romanian"
+  !insertmacro MUI_LANGUAGE "Russian"
+  !insertmacro MUI_LANGUAGE "Serbian"
+  !insertmacro MUI_LANGUAGE "SerbianLatin"
+  !insertmacro MUI_LANGUAGE "SimpChinese"
+  !insertmacro MUI_LANGUAGE "Slovak"
+  !insertmacro MUI_LANGUAGE "Slovenian"
+  !insertmacro MUI_LANGUAGE "Spanish"
+  !insertmacro MUI_LANGUAGE "Swedish"
+  !insertmacro MUI_LANGUAGE "Thai"
+  !insertmacro MUI_LANGUAGE "TradChinese"
+  !insertmacro MUI_LANGUAGE "Turkish"
+  !insertmacro MUI_LANGUAGE "Ukrainian"
+  !insertmacro MUI_LANGUAGE "Welsh"
+
+
+;--------------------------------
+;Reserve Files
+
+  ;These files should be inserted before other files in the data block
+  ;Keep these lines before any File command
+  ;Only for solid compression (by default, solid compression is enabled for BZIP2 and LZMA)
+
+  ReserveFile "NSIS.InstallOptions.ini"
+  !insertmacro MUI_RESERVEFILE_INSTALLOPTIONS
+
+;--------------------------------
+;Installer Sections
+
+Section "-Core installation"
+  ;Use the entire tree produced by the INSTALL target.  Keep the
+  ;list of directories here in sync with the RMDir commands below.
+  SetOutPath "$INSTDIR"
+  @CPACK_NSIS_EXTRA_PREINSTALL_COMMANDS@
+  @CPACK_NSIS_FULL_INSTALL@
+
+  ;Store installation folder
+  WriteRegStr SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "" $INSTDIR
+
+  ;Create uninstaller
+  WriteUninstaller "$INSTDIR\Uninstall.exe"
+  Push "DisplayName"
+  Push "@CPACK_NSIS_DISPLAY_NAME@"
+  Call ConditionalAddToRegisty
+  Push "DisplayVersion"
+  Push "@CPACK_PACKAGE_VERSION@"
+  Call ConditionalAddToRegisty
+  Push "Publisher"
+  Push "@CPACK_PACKAGE_VENDOR@"
+  Call ConditionalAddToRegisty
+  Push "UninstallString"
+  Push "$INSTDIR\Uninstall.exe"
+  Call ConditionalAddToRegisty
+  Push "NoRepair"
+  Push "1"
+  Call ConditionalAddToRegisty
+
+  !ifdef CPACK_NSIS_ADD_REMOVE
+  ;Create add/remove functionality
+  Push "ModifyPath"
+  Push "$INSTDIR\AddRemove.exe"
+  Call ConditionalAddToRegisty
+  !else
+  Push "NoModify"
+  Push "1"
+  Call ConditionalAddToRegisty
+  !endif
+
+  ; Optional registration
+  Push "DisplayIcon"
+  Push "$INSTDIR\@CPACK_NSIS_INSTALLED_ICON_NAME@"
+  Call ConditionalAddToRegisty
+  Push "HelpLink"
+  Push "@CPACK_NSIS_HELP_LINK@"
+  Call ConditionalAddToRegisty
+  Push "URLInfoAbout"
+  Push "@CPACK_NSIS_URL_INFO_ABOUT@"
+  Call ConditionalAddToRegisty
+  Push "Contact"
+  Push "@CPACK_NSIS_CONTACT@"
+  Call ConditionalAddToRegisty
+  !insertmacro MUI_INSTALLOPTIONS_READ $INSTALL_DESKTOP "NSIS.InstallOptions.ini" "Field 5" "State"
+  !insertmacro MUI_STARTMENU_WRITE_BEGIN Application
+
+  ;Create shortcuts
+  CreateDirectory "$SMPROGRAMS\$STARTMENU_FOLDER"
+@CPACK_NSIS_CREATE_ICONS@
+@CPACK_NSIS_CREATE_ICONS_EXTRA@
+  CreateShortCut "$SMPROGRAMS\$STARTMENU_FOLDER\Uninstall.lnk" "$INSTDIR\Uninstall.exe"
+
+  ;Read a value from an InstallOptions INI file
+  !insertmacro MUI_INSTALLOPTIONS_READ $DO_NOT_ADD_TO_PATH "NSIS.InstallOptions.ini" "Field 2" "State"
+  !insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_ALL_USERS "NSIS.InstallOptions.ini" "Field 3" "State"
+  !insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_CURRENT_USER "NSIS.InstallOptions.ini" "Field 4" "State"
+
+  ; Write special uninstall registry entries
+  Push "StartMenu"
+  Push "$STARTMENU_FOLDER"
+  Call ConditionalAddToRegisty
+  Push "DoNotAddToPath"
+  Push "$DO_NOT_ADD_TO_PATH"
+  Call ConditionalAddToRegisty
+  Push "AddToPathAllUsers"
+  Push "$ADD_TO_PATH_ALL_USERS"
+  Call ConditionalAddToRegisty
+  Push "AddToPathCurrentUser"
+  Push "$ADD_TO_PATH_CURRENT_USER"
+  Call ConditionalAddToRegisty
+  Push "InstallToDesktop"
+  Push "$INSTALL_DESKTOP"
+  Call ConditionalAddToRegisty
+
+  !insertmacro MUI_STARTMENU_WRITE_END
+
+@CPACK_NSIS_EXTRA_INSTALL_COMMANDS@
+
+SectionEnd
+
+Section "-Add to path"
+  Push $INSTDIR\bin
+  StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 doNotAddToPath
+  StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0
+    Call AddToPath
+  doNotAddToPath:
+SectionEnd
+
+;--------------------------------
+; Create custom pages
+Function InstallOptionsPage
+  !insertmacro MUI_HEADER_TEXT "Install Options" "Choose options for installing @CPACK_NSIS_PACKAGE_NAME@"
+  !insertmacro MUI_INSTALLOPTIONS_DISPLAY "NSIS.InstallOptions.ini"
+
+FunctionEnd
+
+;--------------------------------
+; determine admin versus local install
+Function un.onInit
+
+  ClearErrors
+  UserInfo::GetName
+  IfErrors noLM
+  Pop $0
+  UserInfo::GetAccountType
+  Pop $1
+  StrCmp $1 "Admin" 0 +3
+    SetShellVarContext all
+    ;MessageBox MB_OK 'User "$0" is in the Admin group'
+    Goto done
+  StrCmp $1 "Power" 0 +3
+    SetShellVarContext all
+    ;MessageBox MB_OK 'User "$0" is in the Power Users group'
+    Goto done
+
+  noLM:
+    ;Get installation folder from registry if available
+
+  done:
+
+FunctionEnd
+
+;--- Add/Remove callback functions: ---
+!macro SectionList MacroName
+  ;This macro used to perform operation on multiple sections.
+  ;List all of your components in following manner here.
+@CPACK_NSIS_COMPONENT_SECTION_LIST@
+!macroend
+
+Section -FinishComponents
+  ;Removes unselected components and writes component status to registry
+  !insertmacro SectionList "FinishSection"
+
+!ifdef CPACK_NSIS_ADD_REMOVE
+  ; Get the name of the installer executable
+  System::Call 'kernel32::GetModuleFileNameA(i 0, t .R0, i 1024) i r1'
+  StrCpy $R3 $R0
+
+  ; Strip off the last 13 characters, to see if we have AddRemove.exe
+  StrLen $R1 $R0
+  IntOp $R1 $R0 - 13
+  StrCpy $R2 $R0 13 $R1
+  StrCmp $R2 "AddRemove.exe" addremove_installed
+
+  ; We're not running AddRemove.exe, so install it
+  CopyFiles $R3 $INSTDIR\AddRemove.exe
+
+  addremove_installed:
+!endif
+SectionEnd
+;--- End of Add/Remove callback functions ---
+
+;--------------------------------
+; Component dependencies
+Function .onSelChange
+  !insertmacro SectionList MaybeSelectionChanged
+FunctionEnd
+
+;--------------------------------
+;Uninstaller Section
+
+Section "Uninstall"
+  ReadRegStr $START_MENU SHCTX \
+   "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "StartMenu"
+  ;MessageBox MB_OK "Start menu is in: $START_MENU"
+  ReadRegStr $DO_NOT_ADD_TO_PATH SHCTX \
+    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "DoNotAddToPath"
+  ReadRegStr $ADD_TO_PATH_ALL_USERS SHCTX \
+    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "AddToPathAllUsers"
+  ReadRegStr $ADD_TO_PATH_CURRENT_USER SHCTX \
+    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "AddToPathCurrentUser"
+  ;MessageBox MB_OK "Add to path: $DO_NOT_ADD_TO_PATH all users: $ADD_TO_PATH_ALL_USERS"
+  ReadRegStr $INSTALL_DESKTOP SHCTX \
+    "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "InstallToDesktop"
+  ;MessageBox MB_OK "Install to desktop: $INSTALL_DESKTOP "
+
+@CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS@
+
+  ;Remove files we installed.
+  ;Keep the list of directories here in sync with the File commands above.
+@CPACK_NSIS_DELETE_FILES@
+@CPACK_NSIS_DELETE_DIRECTORIES@
+
+!ifdef CPACK_NSIS_ADD_REMOVE
+  ;Remove the add/remove program
+  Delete "$INSTDIR\AddRemove.exe"
+!endif
+
+  ;Remove the uninstaller itself.
+  Delete "$INSTDIR\Uninstall.exe"
+  DeleteRegKey SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
+
+  ;Remove the installation directory if it is empty.
+  RMDir "$INSTDIR"
+
+  ; Remove the registry entries.
+  DeleteRegKey SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
+
+  ; Removes all optional components
+  !insertmacro SectionList "RemoveSection_CPack"
+
+  !insertmacro MUI_STARTMENU_GETFOLDER Application $MUI_TEMP
+
+  Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
+@CPACK_NSIS_DELETE_ICONS@
+@CPACK_NSIS_DELETE_ICONS_EXTRA@
+
+  ;Delete empty start menu parent diretories
+  StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
+
+  startMenuDeleteLoop:
+    ClearErrors
+    RMDir $MUI_TEMP
+    GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
+
+    IfErrors startMenuDeleteLoopDone
+
+    StrCmp "$MUI_TEMP" "$SMPROGRAMS" startMenuDeleteLoopDone startMenuDeleteLoop
+  startMenuDeleteLoopDone:
+
+  ; If the user changed the shortcut, then untinstall may not work. This should
+  ; try to fix it.
+  StrCpy $MUI_TEMP "$START_MENU"
+  Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
+@CPACK_NSIS_DELETE_ICONS_EXTRA@
+
+  ;Delete empty start menu parent diretories
+  StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
+
+  secondStartMenuDeleteLoop:
+    ClearErrors
+    RMDir $MUI_TEMP
+    GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
+
+    IfErrors secondStartMenuDeleteLoopDone
+
+    StrCmp "$MUI_TEMP" "$SMPROGRAMS" secondStartMenuDeleteLoopDone secondStartMenuDeleteLoop
+  secondStartMenuDeleteLoopDone:
+
+  DeleteRegKey /ifempty SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
+
+  Push $INSTDIR\bin
+  StrCmp $DO_NOT_ADD_TO_PATH_ "1" doNotRemoveFromPath 0
+    Call un.RemoveFromPath
+  doNotRemoveFromPath:
+SectionEnd
+
+;--------------------------------
+; determine admin versus local install
+; Is install for "AllUsers" or "JustMe"?
+; Default to "JustMe" - set to "AllUsers" if admin or on Win9x
+; This function is used for the very first "custom page" of the installer.
+; This custom page does not show up visibly, but it executes prior to the
+; first visible page and sets up $INSTDIR properly...
+; Choose different default installation folder based on SV_ALLUSERS...
+; "Program Files" for AllUsers, "My Documents" for JustMe...
+
+Function .onInit
+  StrCmp "@CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL@" "ON" 0 inst
+
+  ReadRegStr $0 HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "UninstallString"
+  StrCmp $0 "" inst
+
+  MessageBox MB_YESNOCANCEL|MB_ICONEXCLAMATION \
+  "@CPACK_NSIS_PACKAGE_NAME@ is already installed. $\n$\nDo you want to uninstall the old version before installing the new one?" \
+  IDYES uninst IDNO inst
+  Abort
+
+;Run the uninstaller
+uninst:
+  ClearErrors
+  StrLen $2 "\Uninstall.exe"
+  StrCpy $3 $0 -$2 # remove "\Uninstall.exe" from UninstallString to get path
+  ExecWait '$0 _?=$3' ;Do not copy the uninstaller to a temp file
+
+  IfErrors uninst_failed inst
+uninst_failed:
+  MessageBox MB_OK|MB_ICONSTOP "Uninstall failed."
+  Abort
+
+
+inst:
+  ; Reads components status for registry
+  !insertmacro SectionList "InitSection"
+
+  ; check to see if /D has been used to change
+  ; the install directory by comparing it to the
+  ; install directory that is expected to be the
+  ; default
+  StrCpy $IS_DEFAULT_INSTALLDIR 0
+  StrCmp "$INSTDIR" "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" 0 +2
+    StrCpy $IS_DEFAULT_INSTALLDIR 1
+
+  StrCpy $SV_ALLUSERS "JustMe"
+  ; if default install dir then change the default
+  ; if it is installed for JustMe
+  StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2
+    StrCpy $INSTDIR "$DOCUMENTS\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
+
+  ClearErrors
+  UserInfo::GetName
+  IfErrors noLM
+  Pop $0
+  UserInfo::GetAccountType
+  Pop $1
+  StrCmp $1 "Admin" 0 +4
+    SetShellVarContext all
+    ;MessageBox MB_OK 'User "$0" is in the Admin group'
+    StrCpy $SV_ALLUSERS "AllUsers"
+    Goto done
+  StrCmp $1 "Power" 0 +4
+    SetShellVarContext all
+    ;MessageBox MB_OK 'User "$0" is in the Power Users group'
+    StrCpy $SV_ALLUSERS "AllUsers"
+    Goto done
+
+  noLM:
+    StrCpy $SV_ALLUSERS "AllUsers"
+    ;Get installation folder from registry if available
+
+  done:
+  StrCmp $SV_ALLUSERS "AllUsers" 0 +3
+    StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2
+      StrCpy $INSTDIR "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
+
+  StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 noOptionsPage
+    !insertmacro MUI_INSTALLOPTIONS_EXTRACT "NSIS.InstallOptions.ini"
+
+  noOptionsPage:
+FunctionEnd
diff --git a/share/cmake-3.2/Modules/Platform/AIX-GNU-ASM.cmake b/share/cmake-3.6/Modules/Platform/AIX-GNU-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-GNU-ASM.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-GNU-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/AIX-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/AIX-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/AIX-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-GNU-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/AIX-GNU.cmake b/share/cmake-3.6/Modules/Platform/AIX-GNU.cmake
new file mode 100644
index 0000000..d6f5331
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/AIX-GNU.cmake
@@ -0,0 +1,37 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__AIX_COMPILER_GNU)
+  return()
+endif()
+set(__AIX_COMPILER_GNU 1)
+
+#
+# By default, runtime linking is enabled. All shared objects specified on the command line
+# will be listed, even if there are no symbols referenced, in the output file.
+set (CMAKE_SHARED_LINKER_FLAGS_INIT "-Wl,-brtl")
+set (CMAKE_MODULE_LINKER_FLAGS_INIT "-Wl,-brtl")
+set (CMAKE_EXE_LINKER_FLAGS_INIT "-Wl,-brtl")
+
+
+macro(__aix_compiler_gnu lang)
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,-blibpath:")
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS} -Wl,-G,-bnoipath")
+  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,-bexpall")
+  set(CMAKE_${lang}_USE_IMPLICIT_LINK_DIRECTORIES_IN_RUNTIME_PATH 1)
+
+  set(CMAKE_${lang}_LINK_FLAGS "-Wl,-bnoipath")
+endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/AIX-VisualAge-C.cmake b/share/cmake-3.6/Modules/Platform/AIX-VisualAge-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-VisualAge-C.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-VisualAge-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-VisualAge-CXX.cmake b/share/cmake-3.6/Modules/Platform/AIX-VisualAge-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-VisualAge-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-VisualAge-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-VisualAge-Fortran.cmake b/share/cmake-3.6/Modules/Platform/AIX-VisualAge-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-VisualAge-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-VisualAge-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-XL-ASM.cmake b/share/cmake-3.6/Modules/Platform/AIX-XL-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-XL-ASM.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-XL-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-XL-C.cmake b/share/cmake-3.6/Modules/Platform/AIX-XL-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-XL-C.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-XL-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-XL-CXX.cmake b/share/cmake-3.6/Modules/Platform/AIX-XL-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-XL-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-XL-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/AIX-XL-Fortran.cmake b/share/cmake-3.6/Modules/Platform/AIX-XL-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/AIX-XL-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/AIX-XL-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/AIX-XL.cmake b/share/cmake-3.6/Modules/Platform/AIX-XL.cmake
new file mode 100644
index 0000000..5470441
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/AIX-XL.cmake
@@ -0,0 +1,38 @@
+
+#=============================================================================
+# Copyright 2002-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__AIX_COMPILER_XL)
+  return()
+endif()
+set(__AIX_COMPILER_XL 1)
+
+#
+# By default, runtime linking is enabled. All shared objects specified on the command line
+# will be listed, even if there are no symbols referenced, in the output file.
+set(CMAKE_SHARED_LINKER_FLAGS_INIT "-Wl,-brtl")
+set(CMAKE_MODULE_LINKER_FLAGS_INIT "-Wl,-brtl")
+set(CMAKE_EXE_LINKER_FLAGS_INIT "-Wl,-brtl")
+
+
+macro(__aix_compiler_xl lang)
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,-blibpath:")
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-G -Wl,-bnoipath")  # -shared
+  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,-bexpall")
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS " ")
+  set(CMAKE_SHARED_MODULE_${lang}_FLAGS  " ")
+
+  set(CMAKE_${lang}_LINK_FLAGS "-Wl,-bnoipath")
+endmacro()
diff --git a/share/cmake-3.6/Modules/Platform/AIX.cmake b/share/cmake-3.6/Modules/Platform/AIX.cmake
new file mode 100644
index 0000000..551a995
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/AIX.cmake
@@ -0,0 +1,31 @@
+set(CMAKE_SHARED_LIBRARY_PREFIX "lib")          # lib
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".so")          # .so
+set(CMAKE_DL_LIBS "-lld")
+
+# RPATH support on AIX is called libpath.  By default the runtime
+# libpath is paths specified by -L followed by /usr/lib and /lib.  In
+# order to prevent the -L paths from being used we must force use of
+# -Wl,-blibpath:/usr/lib:/lib whether RPATH support is on or not.
+# When our own RPATH is to be added it may be inserted before the
+# "always" paths.
+if(NOT DEFINED CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH)
+  set(CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH /usr/lib /lib)
+endif()
+
+# Files named "libfoo.a" may actually be shared libraries.
+set_property(GLOBAL PROPERTY TARGET_ARCHIVES_MAY_BE_SHARED_LIBS 1)
+
+# since .a can be a static or shared library on AIX, we can not do this.
+# at some point if we wanted it, we would have to figure out if a .a is
+# static or shared, then we could add this back:
+
+# Initialize C link type selection flags.  These flags are used when
+# building a shared library, shared module, or executable that links
+# to other libraries to select whether to use the static or shared
+# versions of the libraries.
+#foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+#  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-bstatic")
+#  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-bdynamic")
+#endforeach()
+
+include(Platform/UnixPaths)
diff --git a/share/cmake-3.6/Modules/Platform/ARTOS-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/ARTOS-GNU-C.cmake
new file mode 100644
index 0000000..967d0e7
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/ARTOS-GNU-C.cmake
@@ -0,0 +1,9 @@
+# Define ARTOS to select proper behaviour and tell preprocessor to accept C++ style comments.
+set(CMAKE_C_FLAGS_INIT "-DARTOS -Xp -+")
+# ac doesn't support -g properly and doesn't support the normal gcc optimization options. Just use the defaults set by ac.
+set(CMAKE_C_FLAGS_DEBUG_INIT "")
+set(CMAKE_C_FLAGS_MINSIZEREL_INIT "-DNDEBUG")
+set(CMAKE_C_FLAGS_RELEASE_INIT "-DNDEBUG")
+set(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "-DNDEBUG")
+# Most projects expect the stdio functions to be available.
+set(CMAKE_C_STANDARD_LIBRARIES_INIT "stdio.a")
diff --git a/share/cmake-3.6/Modules/Platform/ARTOS.cmake b/share/cmake-3.6/Modules/Platform/ARTOS.cmake
new file mode 100644
index 0000000..f9365d6
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/ARTOS.cmake
@@ -0,0 +1,17 @@
+# Support for ARTOS RTOS (locamation.com)
+set(CMAKE_LINK_LIBRARY_SUFFIX "")
+set(CMAKE_STATIC_LIBRARY_PREFIX "")
+set(CMAKE_STATIC_LIBRARY_SUFFIX ".a")
+set(CMAKE_SHARED_LIBRARY_PREFIX "")
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".a")
+set(CMAKE_EXECUTABLE_SUFFIX ".x")
+set(CMAKE_DL_LIBS "")
+
+set(CMAKE_FIND_LIBRARY_PREFIXES "")
+set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
+
+# ARTOS does not support shared libs
+set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE)
+
+set(CMAKE_C_LINK_SHARED_LIBRARY )
+set(CMAKE_C_LINK_MODULE_LIBRARY )
diff --git a/share/cmake-3.2/Modules/Platform/Android.cmake b/share/cmake-3.6/Modules/Platform/Android.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Android.cmake
rename to share/cmake-3.6/Modules/Platform/Android.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BSDOS.cmake b/share/cmake-3.6/Modules/Platform/BSDOS.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BSDOS.cmake
rename to share/cmake-3.6/Modules/Platform/BSDOS.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BeOS.cmake b/share/cmake-3.6/Modules/Platform/BeOS.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BeOS.cmake
rename to share/cmake-3.6/Modules/Platform/BeOS.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneL.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneL.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneL.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneL.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-base.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-base.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-base.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-base.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-GNU-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-XL-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-XL-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-XL-C.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-XL-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-XL-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-XL-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-XL-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-XL-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-XL-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-XL-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic-XL-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic-XL-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-dynamic.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-dynamic.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-static-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-static-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-static-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-static-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-static-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-static-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-static-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-static-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-static-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-static-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-static-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-static-GNU-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-static-XL-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-static-XL-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-static-XL-C.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-static-XL-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-static-XL-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-static-XL-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-static-XL-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-static-XL-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-static-XL-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-static-XL-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-static-XL-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-static-XL-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/BlueGeneP-static.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneP-static.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/BlueGeneP-static.cmake
rename to share/cmake-3.6/Modules/Platform/BlueGeneP-static.cmake
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-base.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-base.cmake
new file mode 100644
index 0000000..9372166
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-base.cmake
@@ -0,0 +1,177 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#
+# Blue Gene/Q base platform file.
+#
+# NOTE: Do not set your platform to "BlueGeneQ-base".  This file is
+# included by the real platform files.  Use one of these two platforms
+# instead:
+#
+#     BlueGeneQ-dynamic  For dynamically linked executables
+#     BlueGeneQ-static   For statically linked executables
+#
+# The platform you choose doesn't affect whether or not you can build
+# shared or static libraries -- it ONLY changs whether exeuatbles are linked
+# statically or dynamically.
+#
+# This platform file tries its best to adhere to the behavior of the MPI
+# compiler wrappers included with the latest BG/P drivers.
+#
+
+#
+# This adds directories that find commands should specifically ignore
+# for cross compiles.  Most of these directories are the includeand
+# lib directories for the frontend on BG/P systems.  Not ignoring
+# these can cause things like FindX11 to find a frontend PPC version
+# mistakenly.  We use this on BG instead of re-rooting because backend
+# libraries are typically strewn about the filesystem, and we can't
+# re-root ALL backend libraries to a single place.
+#
+set(CMAKE_SYSTEM_IGNORE_PATH
+  /lib             /lib64             /include
+  /usr/lib         /usr/lib64         /usr/include
+  /usr/local/lib   /usr/local/lib64   /usr/local/include
+  /usr/X11/lib     /usr/X11/lib64     /usr/X11/include
+  /usr/lib/X11     /usr/lib64/X11     /usr/include/X11
+  /usr/X11R6/lib   /usr/X11R6/lib64   /usr/X11R6/include
+  /usr/X11R7/lib   /usr/X11R7/lib64   /usr/X11R7/include
+)
+
+#
+# Indicate that this is a unix-like system
+#
+set(UNIX 1)
+
+#
+# Library prefixes, suffixes, extra libs.
+#
+set(CMAKE_LINK_LIBRARY_SUFFIX "")
+set(CMAKE_STATIC_LIBRARY_PREFIX "lib")     # lib
+set(CMAKE_STATIC_LIBRARY_SUFFIX ".a")      # .a
+
+set(CMAKE_SHARED_LIBRARY_PREFIX "lib")     # lib
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".so")     # .so
+set(CMAKE_EXECUTABLE_SUFFIX "")            # .exe
+
+set(CMAKE_DL_LIBS "dl")
+
+#
+# BG/Q supports dynamic libraries regardless of whether we're building
+# static or dynamic *executables*.
+#
+set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS TRUE)
+set(CMAKE_FIND_LIBRARY_PREFIXES "lib")
+
+#
+# For BGQ builds, we're cross compiling, but we don't want to re-root things
+# (e.g. with CMAKE_FIND_ROOT_PATH) because users may have libraries anywhere on
+# the shared filesystems, and this may lie outside the root.  Instead, we set the
+# system directories so that the various system BG CNK library locations are
+# searched first.  This is not the clearest thing in the world, given IBM's driver
+# layout, but this should cover all the standard ones.
+#
+macro(__BlueGeneQ_common_setup compiler_id lang)
+  # Need to use the version of the comm lib compiled with the right compiler.
+  set(__BlueGeneQ_commlib_dir gcc)
+  if (${compiler_id} STREQUAL XL)
+    set(__BlueGeneQ_commlib_dir xl)
+  endif()
+
+  set(CMAKE_SYSTEM_LIBRARY_PATH
+    /bgsys/drivers/ppcfloor/comm/default/lib                    # default comm layer (used by mpi compiler wrappers)
+    /bgsys/drivers/ppcfloor/comm/${__BlueGeneQ_commlib_dir}/lib # PAMI, other lower-level comm libraries
+    /bgsys/drivers/ppcfloor/gnu-linux/lib                       # CNK python installation directory
+    /bgsys/drivers/ppcfloor/gnu-linux/powerpc64-bgq-linux/lib   # CNK Linux image -- standard runtime libs, pthread, etc.
+    )
+
+  # Add all the system include paths.
+  set(CMAKE_SYSTEM_INCLUDE_PATH
+    /bgsys/drivers/ppcfloor/comm/sys/include
+    /bgsys/drivers/ppcfloor/
+    /bgsys/drivers/ppcfloor/spi/include
+    /bgsys/drivers/ppcfloor/spi/include/kernel/cnk
+    /bgsys/drivers/ppcfloor/comm/${__BlueGeneQ_commlib_dir}/include
+    )
+
+  # Ensure that the system directories are included with the regular compilers, as users will expect this
+  # to do the same thing as the MPI compilers, which add these flags.
+  set(BGQ_SYSTEM_INCLUDES "")
+  foreach(dir ${CMAKE_SYSTEM_INCLUDE_PATH})
+    set(BGQ_SYSTEM_INCLUDES "${BGQ_SYSTEM_INCLUDES} -I${dir}")
+  endforeach()
+  set(CMAKE_C_COMPILE_OBJECT   "<CMAKE_C_COMPILER>   <DEFINES> ${BGQ_SYSTEM_INCLUDES} <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
+  set(CMAKE_CXX_COMPILE_OBJECT "<CMAKE_CXX_COMPILER> <DEFINES> ${BGQ_SYSTEM_INCLUDES} <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
+
+  #
+  # Code below does setup for shared libraries.  That this is done
+  # regardless of whether the platform is static or dynamic -- you can make
+  # shared libraries even if you intend to make static executables, you just
+  # can't make a dynamic executable if you use the static platform file.
+  #
+  if (${compiler_id} STREQUAL XL)
+    # Flags for XL compilers if we explicitly detected XL
+    set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS           "-qpic")
+    set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS    "-qmkshrobj -qnostaticlink")
+  else()
+    # Assume flags for GNU compilers (if the ID is GNU *or* anything else).
+    set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS           "-fPIC")
+    set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS    "-shared")
+  endif()
+
+  # Both toolchains use the GNU linker on BG/P, so these options are shared.
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG      "-Wl,-rpath,")
+  set(CMAKE_SHARED_LIBRARY_RPATH_LINK_${lang}_FLAG   "-Wl,-rpath-link,")
+  set(CMAKE_SHARED_LIBRARY_SONAME_${lang}_FLAG       "-Wl,-soname,")
+  set(CMAKE_EXE_EXPORTS_${lang}_FLAG                 "-Wl,--export-dynamic")
+  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS        "")  # +s, flag for exe link to use shared lib
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP  ":") # : or empty
+
+endmacro()
+
+#
+# This macro needs to be called for dynamic library support.  Unfortunately on BG,
+# We can't support both static and dynamic links in the same platform file.  The
+# dynamic link platform file needs to call this explicitly to set up dynamic linking.
+#
+macro(__BlueGeneQ_setup_dynamic compiler_id lang)
+  __BlueGeneQ_common_setup(${compiler_id} ${lang})
+
+  if (${compiler_id} STREQUAL XL)
+    set(BGQ_${lang}_DYNAMIC_EXE_FLAGS "-qnostaticlink -qnostaticlink=libgcc")
+  else()
+    set(BGQ_${lang}_DYNAMIC_EXE_FLAGS "-dynamic")
+  endif()
+
+  # For dynamic executables, need to provide special BG/Q arguments.
+  set(BGQ_${lang}_DEFAULT_EXE_FLAGS
+    "<FLAGS> <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+  set(CMAKE_${lang}_LINK_EXECUTABLE
+    "<CMAKE_${lang}_COMPILER> -Wl,-relax ${BGQ_${lang}_DYNAMIC_EXE_FLAGS} ${BGQ_${lang}_DEFAULT_EXE_FLAGS}")
+endmacro()
+
+#
+# This macro needs to be called for static builds.  Right now it just adds -Wl,-relax
+# to the link line.
+#
+macro(__BlueGeneQ_setup_static compiler_id lang)
+  __BlueGeneQ_common_setup(${compiler_id} ${lang})
+
+  # For static executables, use default link settings.
+  set(BGQ_${lang}_DEFAULT_EXE_FLAGS
+    "<FLAGS> <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+  set(CMAKE_${lang}_LINK_EXECUTABLE
+    "<CMAKE_${lang}_COMPILER> -Wl,-relax ${BGQ_${lang}_DEFAULT_EXE_FLAGS}")
+endmacro()
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-C.cmake
new file mode 100644
index 0000000..102ac80
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-C.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_dynamic(GNU C)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-CXX.cmake
new file mode 100644
index 0000000..cd8ab24
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-CXX.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_dynamic(GNU CXX)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-Fortran.cmake
new file mode 100644
index 0000000..c029f0f
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-GNU-Fortran.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_dynamic(GNU Fortran)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-C.cmake
new file mode 100644
index 0000000..0077313
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-C.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_dynamic(XL C)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-CXX.cmake
new file mode 100644
index 0000000..0f43cb2
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-CXX.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_dynamic(XL CXX)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-Fortran.cmake
new file mode 100644
index 0000000..12e446e
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic-XL-Fortran.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_dynamic(XL Fortran)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic.cmake
new file mode 100644
index 0000000..0283900
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-dynamic.cmake
@@ -0,0 +1,17 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(Platform/BlueGeneQ-base)
+set(CMAKE_FIND_LIBRARY_SUFFIXES ".so" ".a")
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-C.cmake
new file mode 100644
index 0000000..70c84ba
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-C.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_static(GNU C)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-CXX.cmake
new file mode 100644
index 0000000..8f991de
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-CXX.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_static(GNU CXX)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-Fortran.cmake
new file mode 100644
index 0000000..24dd9e7
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-GNU-Fortran.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_static(GNU Fortran)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-C.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-C.cmake
new file mode 100644
index 0000000..5555a68
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-C.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_static(XL C)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-CXX.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-CXX.cmake
new file mode 100644
index 0000000..07c3c3d
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-CXX.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_static(XL CXX)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-Fortran.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-Fortran.cmake
new file mode 100644
index 0000000..6f99933
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static-XL-Fortran.cmake
@@ -0,0 +1,16 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+__BlueGeneQ_setup_static(XL Fortran)
diff --git a/share/cmake-3.6/Modules/Platform/BlueGeneQ-static.cmake b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static.cmake
new file mode 100644
index 0000000..30b530d
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/BlueGeneQ-static.cmake
@@ -0,0 +1,17 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2010 Todd Gamblin <tgamblin@llnl.gov>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(Platform/BlueGeneQ-base)
+set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
diff --git a/share/cmake-3.2/Modules/Platform/CYGWIN-CXX.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/CYGWIN-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/CYGWIN-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/CYGWIN-Clang-C.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-Clang-C.cmake
new file mode 100644
index 0000000..e8343a4
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/CYGWIN-Clang-C.cmake
@@ -0,0 +1 @@
+include(Platform/CYGWIN-GNU-C)
diff --git a/share/cmake-3.6/Modules/Platform/CYGWIN-Clang-CXX.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-Clang-CXX.cmake
new file mode 100644
index 0000000..67775de
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/CYGWIN-Clang-CXX.cmake
@@ -0,0 +1 @@
+include(Platform/CYGWIN-GNU-CXX)
diff --git a/share/cmake-3.2/Modules/Platform/CYGWIN-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/CYGWIN-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/CYGWIN-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/CYGWIN-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/CYGWIN-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/CYGWIN-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/CYGWIN-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/CYGWIN-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/CYGWIN-GNU-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/CYGWIN-GNU.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-GNU.cmake
new file mode 100644
index 0000000..1a46c10
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/CYGWIN-GNU.cmake
@@ -0,0 +1,61 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__CYGWIN_COMPILER_GNU)
+  return()
+endif()
+set(__CYGWIN_COMPILER_GNU 1)
+
+# TODO: Is -Wl,--enable-auto-import now always default?
+set(CMAKE_EXE_LINKER_FLAGS_INIT "-Wl,--enable-auto-import")
+set(CMAKE_CREATE_WIN32_EXE  "-mwindows")
+
+set(CMAKE_GNULD_IMAGE_VERSION
+  "-Wl,--major-image-version,<TARGET_VERSION_MAJOR>,--minor-image-version,<TARGET_VERSION_MINOR>")
+set(CMAKE_GENERATOR_RC windres)
+macro(__cygwin_compiler_gnu lang)
+  # Binary link rules.
+  set(CMAKE_${lang}_CREATE_SHARED_MODULE
+    "<CMAKE_${lang}_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_${lang}_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS> -o <TARGET> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
+  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
+    "<CMAKE_${lang}_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_${lang}_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS> -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
+  set(CMAKE_${lang}_LINK_EXECUTABLE
+    "<CMAKE_${lang}_COMPILER> <FLAGS> <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <LINK_LIBRARIES>")
+
+   # No -fPIC on cygwin
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "")
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "")
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "")
+
+  # Initialize C link type selection flags.  These flags are used when
+  # building a shared library, shared module, or executable that links
+  # to other libraries to select whether to use the static or shared
+  # versions of the libraries.
+  foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+    set(CMAKE_${type}_LINK_STATIC_${lang}_FLAGS "-Wl,-Bstatic")
+    set(CMAKE_${type}_LINK_DYNAMIC_${lang}_FLAGS "-Wl,-Bdynamic")
+  endforeach()
+
+  set(CMAKE_EXE_EXPORTS_${lang}_FLAG "-Wl,--export-all-symbols")
+  # TODO: Is -Wl,--enable-auto-import now always default?
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS} -Wl,--enable-auto-import")
+  set(CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS}")
+
+  if(NOT CMAKE_RC_COMPILER_INIT)
+    set(CMAKE_RC_COMPILER_INIT windres)
+  endif()
+
+  enable_language(RC)
+endmacro()
diff --git a/share/cmake-3.6/Modules/Platform/CYGWIN-windres.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN-windres.cmake
new file mode 100644
index 0000000..7d787dd
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/CYGWIN-windres.cmake
@@ -0,0 +1 @@
+set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <FLAGS> <SOURCE> <OBJECT>")
diff --git a/share/cmake-3.2/Modules/Platform/CYGWIN.cmake b/share/cmake-3.6/Modules/Platform/CYGWIN.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/CYGWIN.cmake
rename to share/cmake-3.6/Modules/Platform/CYGWIN.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Catamount.cmake b/share/cmake-3.6/Modules/Platform/Catamount.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Catamount.cmake
rename to share/cmake-3.6/Modules/Platform/Catamount.cmake
diff --git a/share/cmake-3.6/Modules/Platform/CrayLinuxEnvironment.cmake b/share/cmake-3.6/Modules/Platform/CrayLinuxEnvironment.cmake
new file mode 100644
index 0000000..97771a2
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/CrayLinuxEnvironment.cmake
@@ -0,0 +1,143 @@
+# Compute Node Linux doesn't quite work the same as native Linux so all of this
+# needs to be custom.  We use the variables defined through Cray's environment
+# modules to set up the right paths for things.
+
+set(UNIX 1)
+
+if(DEFINED ENV{CRAYOS_VERSION})
+  set(CMAKE_SYSTEM_VERSION "$ENV{CRAYOS_VERSION}")
+elseif(DEFINED ENV{XTOS_VERSION})
+  set(CMAKE_SYSTEM_VERSION "$ENV{XTOS_VERSION}")
+else()
+  message(FATAL_ERROR "Neither the CRAYOS_VERSION or XTOS_VERSION environment variables are defined.  This platform file should be used inside the Cray Linux Environment for targeting compute nodes (NIDs)")
+endif()
+
+# Guard against multiple messages
+if(NOT __CrayLinuxEnvironment_message)
+  set(__CrayLinuxEnvironment_message 1)
+  message(STATUS "Cray Linux Environment ${CMAKE_SYSTEM_VERSION}")
+endif()
+
+# All cray systems are x86 CPUs and have been for quite some time
+# Note: this may need to change in the future with 64-bit ARM
+set(CMAKE_SYSTEM_PROCESSOR "x86_64")
+
+set(CMAKE_SHARED_LIBRARY_PREFIX "lib")
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".so")
+set(CMAKE_STATIC_LIBRARY_PREFIX "lib")
+set(CMAKE_STATIC_LIBRARY_SUFFIX ".a")
+
+set(CMAKE_FIND_LIBRARY_PREFIXES "lib")
+
+# Don't override shared lib support if it's already been set and possibly
+# overridden elsewhere by the CrayPrgEnv module
+if(NOT CMAKE_FIND_LIBRARY_SUFFIXES)
+  set(CMAKE_FIND_LIBRARY_SUFFIXES ".so" ".a")
+  set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS TRUE)
+endif()
+
+set(CMAKE_DL_LIBS dl)
+
+# Note: Much of this is pulled from UnixPaths.cmake but adjusted to the Cray
+# environment accordingly
+
+# Get the install directory of the running cmake to the search directories
+# CMAKE_ROOT is CMAKE_INSTALL_PREFIX/share/cmake, so we need to go two levels up
+get_filename_component(__cmake_install_dir "${CMAKE_ROOT}" PATH)
+get_filename_component(__cmake_install_dir "${__cmake_install_dir}" PATH)
+
+# Note: Some Cray's have the SYSROOT_DIR variable defined, pointing to a copy
+# of the NIDs userland.  If so, then we'll use it.  Otherwise, just assume
+# the userland from the login node is ok
+
+# List common installation prefixes.  These will be used for all
+# search types.
+list(APPEND CMAKE_SYSTEM_PREFIX_PATH
+  # Standard
+  $ENV{SYSROOT_DIR}/usr/local $ENV{SYSROOT_DIR}/usr $ENV{SYSROOT_DIR}/
+
+  # CMake install location
+  "${__cmake_install_dir}"
+  )
+if (NOT CMAKE_FIND_NO_INSTALL_PREFIX)
+  list(APPEND CMAKE_SYSTEM_PREFIX_PATH
+    # Project install destination.
+    "${CMAKE_INSTALL_PREFIX}"
+  )
+  if(CMAKE_STAGING_PREFIX)
+    list(APPEND CMAKE_SYSTEM_PREFIX_PATH
+      # User-supplied staging prefix.
+      "${CMAKE_STAGING_PREFIX}"
+    )
+  endif()
+endif()
+
+list(APPEND CMAKE_SYSTEM_INCLUDE_PATH
+  $ENV{SYSROOT_DIR}/usr/include
+  $ENV{SYSROOT_DIR}/usr/include/X11
+)
+list(APPEND CMAKE_SYSTEM_LIBRARY_PATH
+  $ENV{SYSROOT_DIR}/usr/local/lib64
+  $ENV{SYSROOT_DIR}/usr/lib64
+  $ENV{SYSROOT_DIR}/lib64
+)
+list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES
+  $ENV{SYSROOT_DIR}/usr/local/lib64
+  $ENV{SYSROOT_DIR}/usr/lib64
+  $ENV{SYSROOT_DIR}/lib64
+)
+
+# Compute the intersection of several lists
+function(__cray_list_intersect OUTPUT INPUT0)
+  if(ARGC EQUAL 2)
+    list(APPEND ${OUTPUT} ${${INPUT0}})
+  else()
+    foreach(I IN LISTS ${INPUT0})
+      set(__is_common 1)
+      foreach(L IN LISTS ARGN)
+        list(FIND ${L} "${I}" __idx)
+        if(__idx EQUAL -1)
+          set(__is_common 0)
+          break()
+        endif()
+      endforeach()
+      if(__is_common)
+        list(APPEND ${OUTPUT}  "${I}")
+      endif()
+    endforeach()
+  endif()
+  set(${OUTPUT} ${${OUTPUT}} PARENT_SCOPE)
+endfunction()
+
+macro(__list_clean_dupes var)
+  if(${var})
+    list(REMOVE_DUPLICATES ${var})
+  endif()
+endmacro()
+
+get_property(__langs GLOBAL PROPERTY ENABLED_LANGUAGES)
+set(__cray_inc_path_vars)
+set(__cray_lib_path_vars)
+foreach(__lang IN LISTS __langs)
+  list(APPEND __cray_inc_path_vars CMAKE_${__lang}_IMPLICIT_INCLUDE_DIRECTORIES)
+  list(APPEND __cray_lib_path_vars CMAKE_${__lang}_IMPLICIT_LINK_DIRECTORIES)
+endforeach()
+if(__cray_inc_path_vars)
+  __cray_list_intersect(__cray_implicit_include_dirs ${__cray_inc_path_vars})
+  if(__cray_implicit_include_dirs)
+    list(INSERT CMAKE_SYSTEM_INCLUDE_PATH 0 ${__cray_implicit_include_dirs})
+  endif()
+endif()
+if(__cray_lib_path_vars)
+  __cray_list_intersect(__cray_implicit_library_dirs ${__cray_lib_path_vars})
+  if(__cray_implicit_library_dirs)
+    list(INSERT CMAKE_SYSTEM_LIBRARY_PATH 0 ${__cray_implicit_library_dirs})
+  endif()
+endif()
+__list_clean_dupes(CMAKE_SYSTEM_PREFIX_PATH)
+__list_clean_dupes(CMAKE_SYSTEM_INCLUDE_PATH)
+__list_clean_dupes(CMAKE_SYSTEM_LIBRARY_PATH)
+__list_clean_dupes(CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES)
+
+# Enable use of lib64 search path variants by default.
+set_property(GLOBAL PROPERTY FIND_LIBRARY_USE_LIB64_PATHS TRUE)
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Absoft-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Absoft-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-Absoft-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-Absoft-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Darwin-AppleClang-C.cmake b/share/cmake-3.6/Modules/Platform/Darwin-AppleClang-C.cmake
new file mode 100644
index 0000000..3216b29
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Darwin-AppleClang-C.cmake
@@ -0,0 +1,6 @@
+include(Platform/Darwin-Clang-C)
+if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.2)
+  set(CMAKE_C_SYSTEM_FRAMEWORK_SEARCH_FLAG "-iframework ")
+else()
+  unset(CMAKE_C_SYSTEM_FRAMEWORK_SEARCH_FLAG)
+endif()
diff --git a/share/cmake-3.6/Modules/Platform/Darwin-AppleClang-CXX.cmake b/share/cmake-3.6/Modules/Platform/Darwin-AppleClang-CXX.cmake
new file mode 100644
index 0000000..3fedf8c
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Darwin-AppleClang-CXX.cmake
@@ -0,0 +1,6 @@
+include(Platform/Darwin-Clang-CXX)
+if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.2)
+  set(CMAKE_CXX_SYSTEM_FRAMEWORK_SEARCH_FLAG "-iframework ")
+else()
+  unset(CMAKE_CXX_SYSTEM_FRAMEWORK_SEARCH_FLAG)
+endif()
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-CXX.cmake b/share/cmake-3.6/Modules/Platform/Darwin-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Clang-C.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Clang-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-Clang-C.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-Clang-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Clang-CXX.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Clang-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-Clang-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-Clang-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Darwin-Clang.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Clang.cmake
new file mode 100644
index 0000000..61a5e0c
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Darwin-Clang.cmake
@@ -0,0 +1,30 @@
+
+#=============================================================================
+# Copyright 2002-2012 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__DARWIN_COMPILER_CLANG)
+  return()
+endif()
+set(__DARWIN_COMPILER_CLANG 1)
+
+macro(__darwin_compiler_clang lang)
+  set(CMAKE_${lang}_VERBOSE_FLAG "-v -Wl,-v") # also tell linker to print verbose output
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-dynamiclib -Wl,-headerpad_max_install_names")
+  set(CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS "-bundle -Wl,-headerpad_max_install_names")
+  set(CMAKE_${lang}_SYSROOT_FLAG "-isysroot")
+  set(CMAKE_${lang}_OSX_DEPLOYMENT_TARGET_FLAG "-mmacosx-version-min=")
+  if(NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 3.2)
+    set(CMAKE_${lang}_SYSTEM_FRAMEWORK_SEARCH_FLAG "-iframework ")
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/Darwin-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/Darwin-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Darwin-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-GNU-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-GNU.cmake b/share/cmake-3.6/Modules/Platform/Darwin-GNU.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-GNU.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-GNU.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Darwin-Initialize.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Initialize.cmake
new file mode 100644
index 0000000..91c2cf3
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Darwin-Initialize.cmake
@@ -0,0 +1,145 @@
+# Ask xcode-select where to find /Developer or fall back to ancient location.
+execute_process(COMMAND xcode-select -print-path
+  OUTPUT_VARIABLE _stdout
+  OUTPUT_STRIP_TRAILING_WHITESPACE
+  ERROR_VARIABLE _stderr
+  RESULT_VARIABLE _failed)
+if(NOT _failed AND IS_DIRECTORY ${_stdout})
+  set(OSX_DEVELOPER_ROOT ${_stdout})
+elseif(IS_DIRECTORY "/Developer")
+  set(OSX_DEVELOPER_ROOT "/Developer")
+else()
+  set(OSX_DEVELOPER_ROOT "")
+endif()
+
+execute_process(COMMAND sw_vers -productVersion
+  OUTPUT_VARIABLE CURRENT_OSX_VERSION
+  OUTPUT_STRIP_TRAILING_WHITESPACE)
+
+# Save CMAKE_OSX_ARCHITECTURES from the environment.
+set(CMAKE_OSX_ARCHITECTURES "$ENV{CMAKE_OSX_ARCHITECTURES}" CACHE STRING
+  "Build architectures for OSX")
+
+#----------------------------------------------------------------------------
+# _CURRENT_OSX_VERSION - as a two-component string: 10.5, 10.6, ...
+#
+string(REGEX REPLACE "^([0-9]+\\.[0-9]+).*$" "\\1"
+  _CURRENT_OSX_VERSION "${CURRENT_OSX_VERSION}")
+
+#----------------------------------------------------------------------------
+# CMAKE_OSX_DEPLOYMENT_TARGET
+
+# Set cache variable - end user may change this during ccmake or cmake-gui configure.
+if(_CURRENT_OSX_VERSION VERSION_GREATER 10.3)
+  set(CMAKE_OSX_DEPLOYMENT_TARGET "$ENV{MACOSX_DEPLOYMENT_TARGET}" CACHE STRING
+    "Minimum OS X version to target for deployment (at runtime); newer APIs weak linked. Set to empty string for default value.")
+endif()
+
+#----------------------------------------------------------------------------
+# CMAKE_OSX_SYSROOT
+
+if(CMAKE_OSX_SYSROOT)
+  # Use the existing value without further computation to choose a default.
+  set(_CMAKE_OSX_SYSROOT_DEFAULT "${CMAKE_OSX_SYSROOT}")
+elseif(NOT "x$ENV{SDKROOT}" STREQUAL "x" AND
+        (NOT "x$ENV{SDKROOT}" MATCHES "/" OR IS_DIRECTORY "$ENV{SDKROOT}"))
+  # Use the value of SDKROOT from the environment.
+  set(_CMAKE_OSX_SYSROOT_DEFAULT "$ENV{SDKROOT}")
+elseif("${CMAKE_GENERATOR}" MATCHES Xcode
+       OR CMAKE_OSX_DEPLOYMENT_TARGET
+       OR CMAKE_OSX_ARCHITECTURES MATCHES "[^;]"
+       OR NOT EXISTS "/usr/include/sys/types.h")
+  # Find installed SDKs in either Xcode-4.3+ or pre-4.3 SDKs directory.
+  set(_CMAKE_OSX_SDKS_DIR "")
+  if(OSX_DEVELOPER_ROOT)
+    foreach(d Platforms/MacOSX.platform/Developer/SDKs SDKs)
+      file(GLOB _CMAKE_OSX_SDKS ${OSX_DEVELOPER_ROOT}/${d}/*)
+      if(_CMAKE_OSX_SDKS)
+        set(_CMAKE_OSX_SDKS_DIR ${OSX_DEVELOPER_ROOT}/${d})
+        break()
+      endif()
+    endforeach()
+  endif()
+
+  if(_CMAKE_OSX_SDKS_DIR)
+    # Select SDK for current OSX version accounting for the known
+    # specially named SDKs.
+    set(_CMAKE_OSX_SDKS_VER_SUFFIX_10.4 "u")
+    set(_CMAKE_OSX_SDKS_VER_SUFFIX_10.3 ".9")
+
+    # find the latest SDK
+    set(_CMAKE_OSX_LATEST_SDK_VERSION "0.0")
+    file(GLOB _CMAKE_OSX_SDKS RELATIVE "${_CMAKE_OSX_SDKS_DIR}" "${_CMAKE_OSX_SDKS_DIR}/MacOSX*.sdk")
+    foreach(_SDK ${_CMAKE_OSX_SDKS})
+      if(_SDK MATCHES "MacOSX([0-9]+\\.[0-9]+)[^/]*\\.sdk" AND CMAKE_MATCH_1 VERSION_GREATER ${_CMAKE_OSX_LATEST_SDK_VERSION})
+        set(_CMAKE_OSX_LATEST_SDK_VERSION "${CMAKE_MATCH_1}")
+      endif()
+    endforeach()
+
+    # pick an SDK that works
+    set(_CMAKE_OSX_SYSROOT_DEFAULT)
+    foreach(ver ${CMAKE_OSX_DEPLOYMENT_TARGET}
+                ${_CURRENT_OSX_VERSION}
+                ${_CMAKE_OSX_LATEST_SDK_VERSION})
+      set(_CMAKE_OSX_DEPLOYMENT_TARGET ${ver})
+      set(_CMAKE_OSX_SDKS_VER ${_CMAKE_OSX_DEPLOYMENT_TARGET}${_CMAKE_OSX_SDKS_VER_SUFFIX_${_CMAKE_OSX_DEPLOYMENT_TARGET}})
+      set(_CMAKE_OSX_SYSROOT_CHECK "${_CMAKE_OSX_SDKS_DIR}/MacOSX${_CMAKE_OSX_SDKS_VER}.sdk")
+      if(IS_DIRECTORY "${_CMAKE_OSX_SYSROOT_CHECK}")
+        set(_CMAKE_OSX_SYSROOT_DEFAULT "${_CMAKE_OSX_SYSROOT_CHECK}")
+        break()
+      endif()
+    endforeach()
+
+    if(NOT CMAKE_OSX_DEPLOYMENT_TARGET AND _CURRENT_OSX_VERSION VERSION_LESS _CMAKE_OSX_DEPLOYMENT_TARGET)
+      set(CMAKE_OSX_DEPLOYMENT_TARGET ${_CURRENT_OSX_VERSION} CACHE STRING
+        "Minimum OS X version to target for deployment (at runtime); newer APIs weak linked. Set to empty string for default value." FORCE)
+    endif()
+  else()
+    # Assume developer files are in root (such as Xcode 4.5 command-line tools).
+    set(_CMAKE_OSX_SYSROOT_DEFAULT "")
+  endif()
+endif()
+
+# Set cache variable - end user may change this during ccmake or cmake-gui configure.
+# Choose the type based on the current value.
+set(_CMAKE_OSX_SYSROOT_TYPE STRING)
+foreach(v CMAKE_OSX_SYSROOT _CMAKE_OSX_SYSROOT_DEFAULT)
+  if("x${${v}}" MATCHES "/")
+    set(_CMAKE_OSX_SYSROOT_TYPE PATH)
+    break()
+  endif()
+endforeach()
+set(CMAKE_OSX_SYSROOT "${_CMAKE_OSX_SYSROOT_DEFAULT}" CACHE ${_CMAKE_OSX_SYSROOT_TYPE}
+  "The product will be built against the headers and libraries located inside the indicated SDK.")
+
+# Transform the cached value to something we can use.
+set(_CMAKE_OSX_SYSROOT_ORIG "${CMAKE_OSX_SYSROOT}")
+set(_CMAKE_OSX_SYSROOT_PATH "")
+if(CMAKE_OSX_SYSROOT)
+  if("x${CMAKE_OSX_SYSROOT}" MATCHES "/")
+    # This is a path to the SDK.  Make sure it exists.
+    if(NOT IS_DIRECTORY "${CMAKE_OSX_SYSROOT}")
+      message(WARNING "Ignoring CMAKE_OSX_SYSROOT value:\n ${CMAKE_OSX_SYSROOT}\n"
+        "because the directory does not exist.")
+      set(CMAKE_OSX_SYSROOT "")
+      set(_CMAKE_OSX_SYSROOT_ORIG "")
+    endif()
+    set(_CMAKE_OSX_SYSROOT_PATH "${CMAKE_OSX_SYSROOT}")
+  else()
+    # Transform the sdk name into a path.
+    execute_process(
+      COMMAND xcodebuild -sdk ${CMAKE_OSX_SYSROOT} -version Path
+      OUTPUT_VARIABLE _stdout
+      OUTPUT_STRIP_TRAILING_WHITESPACE
+      ERROR_VARIABLE _stderr
+      RESULT_VARIABLE _failed
+      )
+    if(NOT _failed AND IS_DIRECTORY "${_stdout}")
+      set(_CMAKE_OSX_SYSROOT_PATH "${_stdout}")
+      # For non-Xcode generators use the path.
+      if(NOT "${CMAKE_GENERATOR}" MATCHES "Xcode")
+        set(CMAKE_OSX_SYSROOT "${_CMAKE_OSX_SYSROOT_PATH}")
+      endif()
+    endif()
+  endif()
+endif()
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Intel-C.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Intel-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-Intel-C.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-Intel-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Intel-CXX.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Intel-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-Intel-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-Intel-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Intel-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Intel-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-Intel-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-Intel-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-Intel.cmake b/share/cmake-3.6/Modules/Platform/Darwin-Intel.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-Intel.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-Intel.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Darwin-NAG-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Darwin-NAG-Fortran.cmake
new file mode 100644
index 0000000..e3ac9b5
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Darwin-NAG-Fortran.cmake
@@ -0,0 +1,26 @@
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+# Copyright 2013 OpenGamma Ltd. <graham@opengamma.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(CMAKE_Fortran_VERBOSE_FLAG "-Wl,-v") # Runs gcc under the hood.
+
+# Need -fpp explicitly on case-insensitive filesystem.
+set(CMAKE_Fortran_COMPILE_OBJECT
+  "<CMAKE_Fortran_COMPILER> -fpp -o <OBJECT> <DEFINES> <INCLUDES> <FLAGS> -c <SOURCE>")
+
+set(CMAKE_Fortran_OSX_COMPATIBILITY_VERSION_FLAG "-Wl,-compatibility_version -Wl,")
+set(CMAKE_Fortran_OSX_CURRENT_VERSION_FLAG "-Wl,-current_version -Wl,")
+set(CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS "-Wl,-shared")
+set(CMAKE_SHARED_LIBRARY_SONAME_Fortran_FLAG "-Wl,-install_name -Wl,")
+set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
+  "<CMAKE_Fortran_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG><TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-VisualAge-C.cmake b/share/cmake-3.6/Modules/Platform/Darwin-VisualAge-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-VisualAge-C.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-VisualAge-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-VisualAge-CXX.cmake b/share/cmake-3.6/Modules/Platform/Darwin-VisualAge-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-VisualAge-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-VisualAge-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-XL-C.cmake b/share/cmake-3.6/Modules/Platform/Darwin-XL-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-XL-C.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-XL-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Darwin-XL-CXX.cmake b/share/cmake-3.6/Modules/Platform/Darwin-XL-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Darwin-XL-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Darwin-XL-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Darwin.cmake b/share/cmake-3.6/Modules/Platform/Darwin.cmake
new file mode 100644
index 0000000..bb085ac
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Darwin.cmake
@@ -0,0 +1,241 @@
+set(APPLE 1)
+
+# Darwin versions:
+#   6.x == Mac OSX 10.2 (Jaguar)
+#   7.x == Mac OSX 10.3 (Panther)
+#   8.x == Mac OSX 10.4 (Tiger)
+#   9.x == Mac OSX 10.5 (Leopard)
+#  10.x == Mac OSX 10.6 (Snow Leopard)
+#  11.x == Mac OSX 10.7 (Lion)
+#  12.x == Mac OSX 10.8 (Mountain Lion)
+string(REGEX REPLACE "^([0-9]+)\\.([0-9]+).*$" "\\1" DARWIN_MAJOR_VERSION "${CMAKE_SYSTEM_VERSION}")
+string(REGEX REPLACE "^([0-9]+)\\.([0-9]+).*$" "\\2" DARWIN_MINOR_VERSION "${CMAKE_SYSTEM_VERSION}")
+
+# Do not use the "-Wl,-search_paths_first" flag with the OSX 10.2 compiler.
+# Done this way because it is too early to do a TRY_COMPILE.
+if(NOT DEFINED HAVE_FLAG_SEARCH_PATHS_FIRST)
+  set(HAVE_FLAG_SEARCH_PATHS_FIRST 0)
+  if("${DARWIN_MAJOR_VERSION}" GREATER 6)
+    set(HAVE_FLAG_SEARCH_PATHS_FIRST 1)
+  endif()
+endif()
+# More desirable, but does not work:
+  #include(CheckCXXCompilerFlag)
+  #CHECK_CXX_COMPILER_FLAG("-Wl,-search_paths_first" HAVE_FLAG_SEARCH_PATHS_FIRST)
+
+set(CMAKE_SHARED_LIBRARY_PREFIX "lib")
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".dylib")
+set(CMAKE_SHARED_MODULE_PREFIX "lib")
+set(CMAKE_SHARED_MODULE_SUFFIX ".so")
+set(CMAKE_MODULE_EXISTS 1)
+set(CMAKE_DL_LIBS "")
+
+# Enable rpath support for 10.5 and greater where it is known to work.
+if("${DARWIN_MAJOR_VERSION}" GREATER 8)
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,")
+endif()
+
+set(CMAKE_C_OSX_COMPATIBILITY_VERSION_FLAG "-compatibility_version ")
+set(CMAKE_C_OSX_CURRENT_VERSION_FLAG "-current_version ")
+set(CMAKE_CXX_OSX_COMPATIBILITY_VERSION_FLAG "${CMAKE_C_OSX_COMPATIBILITY_VERSION_FLAG}")
+set(CMAKE_CXX_OSX_CURRENT_VERSION_FLAG "${CMAKE_C_OSX_CURRENT_VERSION_FLAG}")
+
+set(CMAKE_C_LINK_FLAGS "-Wl,-headerpad_max_install_names")
+set(CMAKE_CXX_LINK_FLAGS "-Wl,-headerpad_max_install_names")
+
+if(HAVE_FLAG_SEARCH_PATHS_FIRST)
+  set(CMAKE_C_LINK_FLAGS "-Wl,-search_paths_first ${CMAKE_C_LINK_FLAGS}")
+  set(CMAKE_CXX_LINK_FLAGS "-Wl,-search_paths_first ${CMAKE_CXX_LINK_FLAGS}")
+endif()
+
+set(CMAKE_PLATFORM_HAS_INSTALLNAME 1)
+set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-dynamiclib -Wl,-headerpad_max_install_names")
+set(CMAKE_SHARED_MODULE_CREATE_C_FLAGS "-bundle -Wl,-headerpad_max_install_names")
+set(CMAKE_SHARED_MODULE_LOADER_C_FLAG "-Wl,-bundle_loader,")
+set(CMAKE_SHARED_MODULE_LOADER_CXX_FLAG "-Wl,-bundle_loader,")
+set(CMAKE_FIND_LIBRARY_SUFFIXES ".tbd" ".dylib" ".so" ".a")
+
+# hack: if a new cmake (which uses CMAKE_INSTALL_NAME_TOOL) runs on an old build tree
+# (where install_name_tool was hardcoded) and where CMAKE_INSTALL_NAME_TOOL isn't in the cache
+# and still cmake didn't fail in CMakeFindBinUtils.cmake (because it isn't rerun)
+# hardcode CMAKE_INSTALL_NAME_TOOL here to install_name_tool, so it behaves as it did before, Alex
+if(NOT DEFINED CMAKE_INSTALL_NAME_TOOL)
+  find_program(CMAKE_INSTALL_NAME_TOOL install_name_tool)
+  mark_as_advanced(CMAKE_INSTALL_NAME_TOOL)
+endif()
+
+# Make sure the combination of SDK and Deployment Target are allowed
+if(CMAKE_OSX_DEPLOYMENT_TARGET)
+  if("${_CMAKE_OSX_SYSROOT_PATH}" MATCHES "/MacOSX([0-9]+\\.[0-9]+)[^/]*\\.sdk")
+    set(_sdk_ver "${CMAKE_MATCH_1}")
+  elseif("${_CMAKE_OSX_SYSROOT_ORIG}" MATCHES "^macosx([0-9]+\\.[0-9]+)$")
+    set(_sdk_ver "${CMAKE_MATCH_1}")
+  elseif("${_CMAKE_OSX_SYSROOT_ORIG}" STREQUAL "/")
+    set(_sdk_ver "${_CURRENT_OSX_VERSION}")
+  else()
+    message(FATAL_ERROR
+      "CMAKE_OSX_DEPLOYMENT_TARGET is '${CMAKE_OSX_DEPLOYMENT_TARGET}' "
+      "but CMAKE_OSX_SYSROOT:\n \"${_CMAKE_OSX_SYSROOT_ORIG}\"\n"
+      "is not set to a MacOSX SDK with a recognized version.  "
+      "Either set CMAKE_OSX_SYSROOT to a valid SDK or set "
+      "CMAKE_OSX_DEPLOYMENT_TARGET to empty.")
+  endif()
+  if(CMAKE_OSX_DEPLOYMENT_TARGET VERSION_GREATER "${_sdk_ver}")
+    message(FATAL_ERROR
+      "CMAKE_OSX_DEPLOYMENT_TARGET (${CMAKE_OSX_DEPLOYMENT_TARGET}) "
+      "is greater than CMAKE_OSX_SYSROOT SDK:\n ${_CMAKE_OSX_SYSROOT_ORIG}\n"
+      "Please set CMAKE_OSX_DEPLOYMENT_TARGET to ${_sdk_ver} or lower.")
+  endif()
+endif()
+
+# Enable shared library versioning.
+set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-install_name")
+
+# Xcode does not support -isystem yet.
+if(XCODE)
+  set(CMAKE_INCLUDE_SYSTEM_FLAG_C)
+  set(CMAKE_INCLUDE_SYSTEM_FLAG_CXX)
+endif()
+
+if("${_CURRENT_OSX_VERSION}" VERSION_LESS "10.5")
+  # Need to list dependent shared libraries on link line.  When building
+  # with -isysroot (for universal binaries), the linker always looks for
+  # dependent libraries under the sysroot.  Listing them on the link
+  # line works around the problem.
+  set(CMAKE_LINK_DEPENDENT_LIBRARY_FILES 1)
+endif()
+
+set(CMAKE_C_CREATE_SHARED_LIBRARY_FORBIDDEN_FLAGS -w)
+set(CMAKE_CXX_CREATE_SHARED_LIBRARY_FORBIDDEN_FLAGS -w)
+set(CMAKE_C_CREATE_SHARED_LIBRARY
+  "<CMAKE_C_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
+set(CMAKE_CXX_CREATE_SHARED_LIBRARY
+  "<CMAKE_CXX_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
+set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
+  "<CMAKE_Fortran_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_Fortran_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
+
+set(CMAKE_CXX_CREATE_SHARED_MODULE
+      "<CMAKE_CXX_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_CREATE_CXX_FLAGS> <LINK_FLAGS> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
+
+set(CMAKE_C_CREATE_SHARED_MODULE
+      "<CMAKE_C_COMPILER>  <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_CREATE_C_FLAGS> <LINK_FLAGS> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
+
+set(CMAKE_Fortran_CREATE_SHARED_MODULE
+      "<CMAKE_Fortran_COMPILER>  <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS> <LINK_FLAGS> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
+
+set(CMAKE_C_CREATE_MACOSX_FRAMEWORK
+      "<CMAKE_C_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
+set(CMAKE_CXX_CREATE_MACOSX_FRAMEWORK
+      "<CMAKE_CXX_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS> <LINK_FLAGS> -o <TARGET> <SONAME_FLAG> <TARGET_INSTALLNAME_DIR><TARGET_SONAME> <OBJECTS> <LINK_LIBRARIES>")
+
+# Set default framework search path flag for languages known to use a
+# preprocessor that may find headers in frameworks.
+set(CMAKE_C_FRAMEWORK_SEARCH_FLAG -F)
+set(CMAKE_CXX_FRAMEWORK_SEARCH_FLAG -F)
+set(CMAKE_Fortran_FRAMEWORK_SEARCH_FLAG -F)
+
+# default to searching for frameworks first
+if(NOT DEFINED CMAKE_FIND_FRAMEWORK)
+  set(CMAKE_FIND_FRAMEWORK FIRST)
+endif()
+
+# Older OS X linkers do not report their framework search path
+# with -v but "man ld" documents the following locations.
+set(CMAKE_PLATFORM_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
+  ${_CMAKE_OSX_SYSROOT_PATH}/Library/Frameworks
+  ${_CMAKE_OSX_SYSROOT_PATH}/System/Library/Frameworks
+  )
+if(_CMAKE_OSX_SYSROOT_PATH)
+  # Treat some paths as implicit so we do not override the SDK versions.
+  list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
+    /System/Library/Frameworks)
+endif()
+if("${_CURRENT_OSX_VERSION}" VERSION_LESS "10.5")
+  # Older OS X tools had more implicit paths.
+  list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES
+    ${_CMAKE_OSX_SYSROOT_PATH}/Network/Library/Frameworks)
+endif()
+
+# set up the default search directories for frameworks
+set(CMAKE_SYSTEM_FRAMEWORK_PATH
+  ~/Library/Frameworks
+  )
+if(_CMAKE_OSX_SYSROOT_PATH)
+  list(APPEND CMAKE_SYSTEM_FRAMEWORK_PATH
+    ${_CMAKE_OSX_SYSROOT_PATH}/Library/Frameworks
+    ${_CMAKE_OSX_SYSROOT_PATH}/Network/Library/Frameworks
+    ${_CMAKE_OSX_SYSROOT_PATH}/System/Library/Frameworks
+    )
+  # add platform developer framework path if exists
+  foreach(_path
+    # Xcode 6
+    ${_CMAKE_OSX_SYSROOT_PATH}/../../Library/Frameworks
+    # Xcode 5 iOS
+    ${_CMAKE_OSX_SYSROOT_PATH}/Developer/Library/Frameworks
+    # Xcode 5 OSX
+    ${_CMAKE_OSX_SYSROOT_PATH}/../../../../../Library/Frameworks
+    )
+    get_filename_component(_abolute_path "${_path}" ABSOLUTE)
+    if(EXISTS "${_abolute_path}")
+      list(APPEND CMAKE_SYSTEM_FRAMEWORK_PATH "${_abolute_path}")
+      break()
+    endif()
+  endforeach()
+endif()
+list(APPEND CMAKE_SYSTEM_FRAMEWORK_PATH
+  /Library/Frameworks
+  /Network/Library/Frameworks
+  /System/Library/Frameworks)
+
+# Warn about known system mis-configuration case.
+if(CMAKE_OSX_SYSROOT)
+  get_property(_IN_TC GLOBAL PROPERTY IN_TRY_COMPILE)
+  if(NOT _IN_TC AND
+     NOT IS_SYMLINK "${CMAKE_OSX_SYSROOT}/Library/Frameworks"
+     AND IS_SYMLINK "${CMAKE_OSX_SYSROOT}/Library/Frameworks/Frameworks")
+    message(WARNING "The SDK Library/Frameworks path\n"
+      " ${CMAKE_OSX_SYSROOT}/Library/Frameworks\n"
+      "is not set up correctly on this system.  "
+      "This is known to occur when installing Xcode 3.2.6:\n"
+      " http://bugs.python.org/issue14018\n"
+      "The problem may cause build errors that report missing system frameworks.  "
+      "Fix your SDK symlinks to resolve this issue and avoid this warning."
+      )
+  endif()
+endif()
+
+# default to searching for application bundles first
+if(NOT DEFINED CMAKE_FIND_APPBUNDLE)
+  set(CMAKE_FIND_APPBUNDLE FIRST)
+endif()
+# set up the default search directories for application bundles
+set(_apps_paths)
+foreach(_path
+  "~/Applications"
+  "/Applications"
+  "${OSX_DEVELOPER_ROOT}/../Applications" # Xcode 4.3+
+  "${OSX_DEVELOPER_ROOT}/Applications"    # pre-4.3
+  )
+  get_filename_component(_apps "${_path}" ABSOLUTE)
+  if(EXISTS "${_apps}")
+    list(APPEND _apps_paths "${_apps}")
+  endif()
+endforeach()
+if(_apps_paths)
+  list(REMOVE_DUPLICATES _apps_paths)
+endif()
+set(CMAKE_SYSTEM_APPBUNDLE_PATH
+  ${_apps_paths})
+unset(_apps_paths)
+
+include(Platform/UnixPaths)
+if(_CMAKE_OSX_SYSROOT_PATH AND EXISTS ${_CMAKE_OSX_SYSROOT_PATH}/usr/include)
+  list(APPEND CMAKE_SYSTEM_PREFIX_PATH ${_CMAKE_OSX_SYSROOT_PATH}/usr)
+  foreach(lang C CXX)
+    list(APPEND CMAKE_${lang}_IMPLICIT_INCLUDE_DIRECTORIES ${_CMAKE_OSX_SYSROOT_PATH}/usr/include)
+  endforeach()
+endif()
+list(APPEND CMAKE_SYSTEM_PREFIX_PATH
+  /sw        # Fink
+  /opt/local # MacPorts
+  )
diff --git a/share/cmake-3.2/Modules/Platform/DragonFly.cmake b/share/cmake-3.6/Modules/Platform/DragonFly.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/DragonFly.cmake
rename to share/cmake-3.6/Modules/Platform/DragonFly.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Euros.cmake b/share/cmake-3.6/Modules/Platform/Euros.cmake
new file mode 100644
index 0000000..4c7b182
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Euros.cmake
@@ -0,0 +1,19 @@
+# Support for EUROS RTOS (euros-embedded.com)
+set(CMAKE_LINK_LIBRARY_SUFFIX "")
+set(CMAKE_STATIC_LIBRARY_PREFIX "")
+set(CMAKE_STATIC_LIBRARY_SUFFIX ".lib")
+set(CMAKE_SHARED_LIBRARY_PREFIX "")
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".lib")
+set(CMAKE_EXECUTABLE_SUFFIX ".elf")
+set(CMAKE_DL_LIBS "")
+
+set(CMAKE_FIND_LIBRARY_PREFIXES "")
+set(CMAKE_FIND_LIBRARY_SUFFIXES ".lib")
+
+# EUROS RTOS does not support shared libs
+set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE)
+
+set(CMAKE_CXX_LINK_SHARED_LIBRARY )
+set(CMAKE_CXX_LINK_MODULE_LIBRARY )
+set(CMAKE_C_LINK_SHARED_LIBRARY )
+set(CMAKE_C_LINK_MODULE_LIBRARY )
diff --git a/share/cmake-3.2/Modules/Platform/FreeBSD.cmake b/share/cmake-3.6/Modules/Platform/FreeBSD.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/FreeBSD.cmake
rename to share/cmake-3.6/Modules/Platform/FreeBSD.cmake
diff --git a/share/cmake-3.6/Modules/Platform/GHS-MULTI-Initialize.cmake b/share/cmake-3.6/Modules/Platform/GHS-MULTI-Initialize.cmake
new file mode 100644
index 0000000..6e6b4ff
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/GHS-MULTI-Initialize.cmake
@@ -0,0 +1,51 @@
+
+#=============================================================================
+# Copyright 2015 Geoffrey Viola <geoffrey.viola@asirobots.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#Setup Greenhills MULTI specific compilation information
+
+if (NOT GHS_INT_DIRECTORY)
+  #Assume the C:/ghs/int#### directory that is latest is preferred
+  set(GHS_EXPECTED_ROOT "C:/ghs")
+  if (EXISTS ${GHS_EXPECTED_ROOT})
+    FILE(GLOB GHS_CANDIDATE_INT_DIRS RELATIVE
+      ${GHS_EXPECTED_ROOT} ${GHS_EXPECTED_ROOT}/*)
+    string(REGEX MATCHALL  "int[0-9][0-9][0-9][0-9]" GHS_CANDIDATE_INT_DIRS
+      ${GHS_CANDIDATE_INT_DIRS})
+    if (GHS_CANDIDATE_INT_DIRS)
+      list(SORT GHS_CANDIDATE_INT_DIRS)
+      list(GET GHS_CANDIDATE_INT_DIRS -1 GHS_INT_DIRECTORY)
+      string(CONCAT GHS_INT_DIRECTORY ${GHS_EXPECTED_ROOT} "/"
+        ${GHS_INT_DIRECTORY})
+    endif ()
+  endif ()
+
+  #Try to look for known registry values
+  if (NOT GHS_INT_DIRECTORY)
+    find_path(GHS_INT_DIRECTORY INTEGRITY.ld PATHS
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Wow6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\GreenHillsSoftware6433c345;InstallLocation]" #int1122
+      "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Wow6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\GreenHillsSoftware289b6625;InstallLocation]" #int1104
+      )
+  endif ()
+
+  set(GHS_INT_DIRECTORY ${GHS_INT_DIRECTORY} CACHE PATH
+    "Path to integrity directory")
+endif ()
+
+set(GHS_OS_DIR ${GHS_INT_DIRECTORY} CACHE PATH "OS directory")
+set(GHS_PRIMARY_TARGET "arm_integrity.tgt" CACHE STRING "target for compilation")
+set(GHS_BSP_NAME "simarm" CACHE STRING "BSP name")
+set(GHS_CUSTOMIZATION "" CACHE FILEPATH "optional GHS customization")
+mark_as_advanced(GHS_CUSTOMIZATION)
+set(GHS_GPJ_MACROS "" CACHE STRING "optional GHS macros generated in the .gpjs for legacy reasons")
+mark_as_advanced(GHS_GPJ_MACROS)
diff --git a/share/cmake-3.6/Modules/Platform/GHS-MULTI.cmake b/share/cmake-3.6/Modules/Platform/GHS-MULTI.cmake
new file mode 100644
index 0000000..211cf3e
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/GHS-MULTI.cmake
@@ -0,0 +1,27 @@
+
+#=============================================================================
+# Copyright 2015 Geoffrey Viola <geoffrey.viola@asirobots.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+
+if(__GHSMULTI)
+  return()
+endif()
+set(__GHSMULTI 1)
+
+set(GHSMULTI 1)
+
+set(CMAKE_FIND_LIBRARY_PREFIXES "")
+set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
+
+include(Platform/WindowsPaths)
diff --git a/share/cmake-3.2/Modules/Platform/GNU.cmake b/share/cmake-3.6/Modules/Platform/GNU.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/GNU.cmake
rename to share/cmake-3.6/Modules/Platform/GNU.cmake
diff --git a/share/cmake-3.2/Modules/Platform/GNUtoMS_lib.bat.in b/share/cmake-3.6/Modules/Platform/GNUtoMS_lib.bat.in
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/GNUtoMS_lib.bat.in
rename to share/cmake-3.6/Modules/Platform/GNUtoMS_lib.bat.in
diff --git a/share/cmake-3.2/Modules/Platform/GNUtoMS_lib.cmake b/share/cmake-3.6/Modules/Platform/GNUtoMS_lib.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/GNUtoMS_lib.cmake
rename to share/cmake-3.6/Modules/Platform/GNUtoMS_lib.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Generic-ADSP-ASM.cmake b/share/cmake-3.6/Modules/Platform/Generic-ADSP-ASM.cmake
new file mode 100644
index 0000000..e718bec
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Generic-ADSP-ASM.cmake
@@ -0,0 +1,7 @@
+include(Platform/Generic-ADSP-Common)
+
+set(CMAKE_ASM_SOURCE_FILE_EXTENSIONS asm)
+set(CMAKE_ASM_OUTPUT_EXTENSION ".doj" )
+set(CMAKE_ASM_COMPILE_OBJECT
+    "<CMAKE_ASM_COMPILER> <INCLUDES> <FLAGS> -proc ${ADSP_PROCESSOR} -si-revision ${ADSP_PROCESSOR_SILICIUM_REVISION} -o <OBJECT> <SOURCE>")
+
diff --git a/share/cmake-3.2/Modules/Platform/Generic-ADSP-C.cmake b/share/cmake-3.6/Modules/Platform/Generic-ADSP-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Generic-ADSP-C.cmake
rename to share/cmake-3.6/Modules/Platform/Generic-ADSP-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Generic-ADSP-CXX.cmake b/share/cmake-3.6/Modules/Platform/Generic-ADSP-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Generic-ADSP-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Generic-ADSP-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Generic-ADSP-Common.cmake b/share/cmake-3.6/Modules/Platform/Generic-ADSP-Common.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Generic-ADSP-Common.cmake
rename to share/cmake-3.6/Modules/Platform/Generic-ADSP-Common.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Generic-SDCC-C.cmake b/share/cmake-3.6/Modules/Platform/Generic-SDCC-C.cmake
new file mode 100644
index 0000000..a1ca812
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Generic-SDCC-C.cmake
@@ -0,0 +1,54 @@
+
+# This file implements basic support for sdcc (http://sdcc.sourceforge.net/)
+# a free C compiler for 8 and 16 bit microcontrollers.
+# To use it either a toolchain file is required or cmake has to be run like this:
+# cmake -DCMAKE_C_COMPILER=sdcc -DCMAKE_SYSTEM_NAME=Generic <dir...>
+# Since sdcc doesn't support C++, C++ support should be disabled in the
+# CMakeLists.txt using the project() command:
+# project(my_project C)
+
+set(CMAKE_STATIC_LIBRARY_PREFIX "")
+set(CMAKE_STATIC_LIBRARY_SUFFIX ".lib")
+set(CMAKE_SHARED_LIBRARY_PREFIX "")          # lib
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".lib")          # .so
+set(CMAKE_IMPORT_LIBRARY_PREFIX )
+set(CMAKE_IMPORT_LIBRARY_SUFFIX )
+set(CMAKE_EXECUTABLE_SUFFIX ".ihx")          # intel hex file
+set(CMAKE_LINK_LIBRARY_SUFFIX ".lib")
+set(CMAKE_DL_LIBS "")
+
+set(CMAKE_C_OUTPUT_EXTENSION ".rel")
+
+# find sdcclib as CMAKE_AR
+# since cmake may already have searched for "ar", sdcclib has to
+# be searched with a different variable name (SDCCLIB_EXECUTABLE)
+# and must then be forced into the cache
+get_filename_component(SDCC_LOCATION "${CMAKE_C_COMPILER}" PATH)
+find_program(SDCCLIB_EXECUTABLE sdcclib PATHS "${SDCC_LOCATION}" NO_DEFAULT_PATH)
+find_program(SDCCLIB_EXECUTABLE sdcclib)
+set(CMAKE_AR "${SDCCLIB_EXECUTABLE}" CACHE FILEPATH "The sdcc librarian" FORCE)
+
+# CMAKE_C_FLAGS_INIT and CMAKE_EXE_LINKER_FLAGS_INIT should be set in a CMAKE_SYSTEM_PROCESSOR file
+if(NOT DEFINED CMAKE_C_FLAGS_INIT)
+  set(CMAKE_C_FLAGS_INIT "-mmcs51 --model-small")
+endif()
+
+if(NOT DEFINED CMAKE_EXE_LINKER_FLAGS_INIT)
+  set (CMAKE_EXE_LINKER_FLAGS_INIT --model-small)
+endif()
+
+# compile a C file into an object file
+set(CMAKE_C_COMPILE_OBJECT  "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
+
+# link object files to an executable
+set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_C_COMPILER> <FLAGS> <OBJECTS> --out-fmt-ihx -o  <TARGET> <CMAKE_C_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>")
+
+# needs sdcc 2.7.0 + sddclib from cvs
+set(CMAKE_C_CREATE_STATIC_LIBRARY
+      "\"${CMAKE_COMMAND}\" -E remove <TARGET>"
+      "<CMAKE_AR> -a <TARGET> <LINK_FLAGS> <OBJECTS> ")
+
+# not supported by sdcc
+set(CMAKE_C_CREATE_SHARED_LIBRARY "")
+set(CMAKE_C_CREATE_MODULE_LIBRARY "")
+
diff --git a/share/cmake-3.2/Modules/Platform/Generic.cmake b/share/cmake-3.6/Modules/Platform/Generic.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Generic.cmake
rename to share/cmake-3.6/Modules/Platform/Generic.cmake
diff --git a/share/cmake-3.6/Modules/Platform/HP-UX-GNU-ASM.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-GNU-ASM.cmake
new file mode 100644
index 0000000..613b859
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/HP-UX-GNU-ASM.cmake
@@ -0,0 +1,2 @@
+include(Platform/HP-UX-GNU)
+__hpux_compiler_gnu(ASM)
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/HP-UX-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/HP-UX-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/HP-UX-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/HP-UX-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/HP-UX-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/HP-UX-GNU-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/HP-UX-GNU.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-GNU.cmake
new file mode 100644
index 0000000..6c71784
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/HP-UX-GNU.cmake
@@ -0,0 +1,29 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__HPUX_COMPILER_GNU)
+  return()
+endif()
+set(__HPUX_COMPILER_GNU 1)
+
+macro(__hpux_compiler_gnu lang)
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "${CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS} -Wl,-E,-b,+nodefaultrpath")
+  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,-E")
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,+b")
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
+  set(CMAKE_SHARED_LIBRARY_SONAME_${lang}_FLAG "-Wl,+h")
+
+  set(CMAKE_${lang}_LINK_FLAGS "-Wl,+s,+nodefaultrpath")
+endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/HP-UX-HP-ASM.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-HP-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/HP-UX-HP-ASM.cmake
rename to share/cmake-3.6/Modules/Platform/HP-UX-HP-ASM.cmake
diff --git a/share/cmake-3.6/Modules/Platform/HP-UX-HP-C.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-HP-C.cmake
new file mode 100644
index 0000000..7610383
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/HP-UX-HP-C.cmake
@@ -0,0 +1,6 @@
+include(Platform/HP-UX-HP)
+__hpux_compiler_hp(C)
+
+set(CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_C_CREATE_ASSEMBLY_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
+set(CMAKE_C_COMPILE_OBJECT "<CMAKE_C_COMPILER> <DEFINES> -Aa -Ae <INCLUDES> <FLAGS> -o <OBJECT>   -c <SOURCE>")
diff --git a/share/cmake-3.6/Modules/Platform/HP-UX-HP-CXX.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-HP-CXX.cmake
new file mode 100644
index 0000000..6d90191
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/HP-UX-HP-CXX.cmake
@@ -0,0 +1,14 @@
+include(Platform/HP-UX-HP)
+__hpux_compiler_hp(CXX)
+
+set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_CXX_CREATE_ASSEMBLY_SOURCE
+  "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE>"
+  "mv `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.s <ASSEMBLY_SOURCE>"
+  "rm -f `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.o"
+  )
+
+set(CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
+set(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "+O3 -DNDEBUG")
+set(CMAKE_CXX_FLAGS_RELEASE_INIT "+O2 -DNDEBUG")
+set(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-g")
diff --git a/share/cmake-3.6/Modules/Platform/HP-UX-HP-Fortran.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-HP-Fortran.cmake
new file mode 100644
index 0000000..12007e4
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/HP-UX-HP-Fortran.cmake
@@ -0,0 +1,5 @@
+include(Platform/HP-UX-HP)
+__hpux_compiler_hp(Fortran)
+
+set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
diff --git a/share/cmake-3.6/Modules/Platform/HP-UX-HP.cmake b/share/cmake-3.6/Modules/Platform/HP-UX-HP.cmake
new file mode 100644
index 0000000..3935c31
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/HP-UX-HP.cmake
@@ -0,0 +1,33 @@
+
+#=============================================================================
+# Copyright 2002-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__HPUX_COMPILER_HP)
+  return()
+endif()
+set(__HPUX_COMPILER_HP 1)
+
+macro(__hpux_compiler_hp lang)
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "+Z")
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "+Z")
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-Wl,-E,+nodefaultrpath -b -L/usr/lib")
+  set(CMAKE_SHARED_LIBRARY_LINK_${lang}_FLAGS "-Wl,-E")
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,+b")
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
+  set(CMAKE_SHARED_LIBRARY_SONAME_${lang}_FLAG "-Wl,+h")
+
+  set(CMAKE_${lang}_FLAGS_INIT "")
+
+  set(CMAKE_${lang}_LINK_FLAGS "-Wl,+s,+nodefaultrpath")
+endmacro()
diff --git a/share/cmake-3.6/Modules/Platform/HP-UX.cmake b/share/cmake-3.6/Modules/Platform/HP-UX.cmake
new file mode 100644
index 0000000..9572a7e
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/HP-UX.cmake
@@ -0,0 +1,47 @@
+if(NOT DEFINED CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH)
+  set(CMAKE_PLATFORM_REQUIRED_RUNTIME_PATH /usr/lib)
+endif()
+
+if(NOT CMAKE_SYSTEM_PROCESSOR STREQUAL "ia64")
+  set(CMAKE_SHARED_LIBRARY_SUFFIX ".sl")          # .so
+  set(CMAKE_FIND_LIBRARY_SUFFIXES ".sl" ".so" ".a")
+  set(CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES ".so")
+endif()
+set(CMAKE_DL_LIBS "dld")
+
+# The HP linker needs to find transitive shared library dependencies
+# in the -L path.  Therefore the runtime path must be added to the
+# link line with -L flags.
+set(CMAKE_SHARED_LIBRARY_LINK_C_WITH_RUNTIME_PATH 1)
+set(CMAKE_LINK_DEPENDENT_LIBRARY_DIRS 1)
+
+# Shared libraries with no builtin soname may not be linked safely by
+# specifying the file path.
+set(CMAKE_PLATFORM_USES_PATH_WHEN_NO_SONAME 1)
+
+# set flags for gcc support
+include(Platform/UnixPaths)
+
+# Look in both 32-bit and 64-bit implict link directories, but tell
+# CMake not to pass the paths to the linker.  The linker will find the
+# library for the proper architecture.  In the future we should detect
+# which path will be used by the linker.  Since the pointer type size
+# CMAKE_SIZEOF_VOID_P is not set until after this file executes, we
+# would need to append to CMAKE_SYSTEM_LIBRARY_PATH at a later point
+# (after CMakeTest(LANG)Compiler.cmake runs for at least one language).
+list(APPEND CMAKE_SYSTEM_LIBRARY_PATH /usr/lib/hpux32)
+list(APPEND CMAKE_SYSTEM_LIBRARY_PATH /usr/lib/hpux64)
+list(APPEND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES
+  /usr/lib/hpux32 /usr/lib/hpux64)
+
+# Initialize C and CXX link type selection flags.  These flags are
+# used when building a shared library, shared module, or executable
+# that links to other libraries to select whether to use the static or
+# shared versions of the libraries.
+foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+  foreach(lang C CXX)
+    set(CMAKE_${type}_LINK_STATIC_${lang}_FLAGS "-Wl,-a,archive")
+    set(CMAKE_${type}_LINK_DYNAMIC_${lang}_FLAGS "-Wl,-a,default")
+  endforeach()
+endforeach()
+
diff --git a/share/cmake-3.2/Modules/Platform/Haiku.cmake b/share/cmake-3.6/Modules/Platform/Haiku.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Haiku.cmake
rename to share/cmake-3.6/Modules/Platform/Haiku.cmake
diff --git a/share/cmake-3.2/Modules/Platform/IRIX.cmake b/share/cmake-3.6/Modules/Platform/IRIX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/IRIX.cmake
rename to share/cmake-3.6/Modules/Platform/IRIX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/IRIX64.cmake b/share/cmake-3.6/Modules/Platform/IRIX64.cmake
new file mode 100644
index 0000000..ee9b96e
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/IRIX64.cmake
@@ -0,0 +1,73 @@
+set(CMAKE_DL_LIBS "")
+set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared -rdata_shared")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,")       # -rpath
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP "")   # : or empty
+set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-Wl,-soname,")
+if(NOT CMAKE_COMPILER_IS_GNUCC)
+  # Set default flags init.
+  set(CMAKE_C_FLAGS_INIT "")
+  set(CMAKE_CXX_FLAGS_INIT "")
+  set(CMAKE_Fortran_FLAGS_INIT "")
+  set(CMAKE_EXE_LINKER_FLAGS_INIT "")
+  set(CMAKE_SHARED_LINKER_FLAGS_INIT "")
+  set(CMAKE_MODULE_LINKER_FLAGS_INIT "")
+
+  # If no -o32, -n32, or -64 flag is given, set a reasonable default.
+  if("$ENV{CFLAGS} $ENV{CXXFLAGS} $ENV{LDFLAGS}" MATCHES "-([no]32|64)")
+  else()
+    # Check if this is a 64-bit CMake.
+    if(CMAKE_FILE_SELF MATCHES "^CMAKE_FILE_SELF$")
+      exec_program(file ARGS ${CMAKE_COMMAND} OUTPUT_VARIABLE CMAKE_FILE_SELF)
+      set(CMAKE_FILE_SELF "${CMAKE_FILE_SELF}" CACHE INTERNAL
+        "Output of file command on ${CMAKE_COMMAND}.")
+    endif()
+
+    # Set initial flags to match cmake executable.
+    if(CMAKE_FILE_SELF MATCHES " 64-bit ")
+      set(CMAKE_C_FLAGS_INIT "-64")
+      set(CMAKE_CXX_FLAGS_INIT "-64")
+      set(CMAKE_Fortran_FLAGS_INIT "-64")
+      set(CMAKE_EXE_LINKER_FLAGS_INIT "-64")
+      set(CMAKE_SHARED_LINKER_FLAGS_INIT "-64")
+      set(CMAKE_MODULE_LINKER_FLAGS_INIT "-64")
+    endif()
+  endif()
+
+  # Set remaining defaults.
+  set(CMAKE_CXX_CREATE_STATIC_LIBRARY
+      "<CMAKE_CXX_COMPILER> -ar -o <TARGET> <OBJECTS>")
+  set (CMAKE_CXX_FLAGS_DEBUG_INIT "-g")
+  set (CMAKE_CXX_FLAGS_MINSIZEREL_INIT "-O3 -DNDEBUG")
+  set (CMAKE_CXX_FLAGS_RELEASE_INIT "-O2 -DNDEBUG")
+  set (CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "-O2")
+endif()
+include(Platform/UnixPaths)
+
+if(NOT CMAKE_COMPILER_IS_GNUCC)
+  set (CMAKE_C_CREATE_PREPROCESSED_SOURCE "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+  set (CMAKE_C_CREATE_ASSEMBLY_SOURCE
+    "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE>"
+    "mv `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.s <ASSEMBLY_SOURCE>"
+    )
+endif()
+
+if(NOT CMAKE_COMPILER_IS_GNUCXX)
+  set (CMAKE_CXX_CREATE_PREPROCESSED_SOURCE "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
+  set (CMAKE_CXX_CREATE_ASSEMBLY_SOURCE
+    "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE>"
+    "mv `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.s <ASSEMBLY_SOURCE>"
+    )
+endif()
+
+# Initialize C link type selection flags.  These flags are used when
+# building a shared library, shared module, or executable that links
+# to other libraries to select whether to use the static or shared
+# versions of the libraries.
+foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-Wl,-Bstatic")
+  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-Wl,-Bdynamic")
+endforeach()
+
+# The IRIX linker needs to find transitive shared library dependencies
+# in the -L path.
+set(CMAKE_LINK_DEPENDENT_LIBRARY_DIRS 1)
diff --git a/share/cmake-3.2/Modules/Platform/Linux-Absoft-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-Absoft-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-Absoft-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-Absoft-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Linux-CCur-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-CCur-Fortran.cmake
new file mode 100644
index 0000000..ceecc2f
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Linux-CCur-Fortran.cmake
@@ -0,0 +1 @@
+include(Platform/Linux-GNU-Fortran)
diff --git a/share/cmake-3.2/Modules/Platform/Linux-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-Clang-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-Clang-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-Clang-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-Clang-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-Clang-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-Clang-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-Clang-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-Clang-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-GNU-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Linux-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-GNU-Fortran.cmake
new file mode 100644
index 0000000..85e1226
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Linux-GNU-Fortran.cmake
@@ -0,0 +1,3 @@
+include(Platform/Linux-GNU)
+__linux_compiler_gnu(Fortran)
+set(CMAKE_SHARED_LIBRARY_LINK_Fortran_FLAGS "")
diff --git a/share/cmake-3.2/Modules/Platform/Linux-GNU.cmake b/share/cmake-3.6/Modules/Platform/Linux-GNU.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-GNU.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-GNU.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-Intel-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-Intel-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-Intel-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-Intel-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-Intel-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-Intel-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-Intel-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-Intel-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-Intel-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-Intel-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-Intel-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-Intel-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-Intel.cmake b/share/cmake-3.6/Modules/Platform/Linux-Intel.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-Intel.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-Intel.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-NAG-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-NAG-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-NAG-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-NAG-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PGI-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-PGI-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-PGI-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-PGI-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PGI-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-PGI-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-PGI-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-PGI-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PGI-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-PGI-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-PGI-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-PGI-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Linux-PGI.cmake b/share/cmake-3.6/Modules/Platform/Linux-PGI.cmake
new file mode 100644
index 0000000..baa2248
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Linux-PGI.cmake
@@ -0,0 +1,27 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__LINUX_COMPILER_PGI)
+  return()
+endif()
+set(__LINUX_COMPILER_PGI 1)
+
+macro(__linux_compiler_pgi lang)
+  # Shared library compile and link flags.
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "-fPIC")
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "")
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "-fPIC")
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-shared")
+endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PathScale-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-PathScale-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-PathScale-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-PathScale-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PathScale-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-PathScale-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-PathScale-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-PathScale-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PathScale-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-PathScale-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-PathScale-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-PathScale-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-PathScale.cmake b/share/cmake-3.6/Modules/Platform/Linux-PathScale.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-PathScale.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-PathScale.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-SunPro-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-SunPro-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-SunPro-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-SunPro-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-TinyCC-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-TinyCC-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-TinyCC-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-TinyCC-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-VisualAge-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-VisualAge-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-VisualAge-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-VisualAge-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-VisualAge-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-VisualAge-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-VisualAge-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-VisualAge-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-VisualAge-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-VisualAge-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-VisualAge-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-VisualAge-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-XL-C.cmake b/share/cmake-3.6/Modules/Platform/Linux-XL-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-XL-C.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-XL-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-XL-CXX.cmake b/share/cmake-3.6/Modules/Platform/Linux-XL-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-XL-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-XL-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-XL-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Linux-XL-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-XL-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-XL-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Linux-como.cmake b/share/cmake-3.6/Modules/Platform/Linux-como.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Linux-como.cmake
rename to share/cmake-3.6/Modules/Platform/Linux-como.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Linux.cmake b/share/cmake-3.6/Modules/Platform/Linux.cmake
new file mode 100644
index 0000000..e40a74f
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Linux.cmake
@@ -0,0 +1,57 @@
+set(CMAKE_DL_LIBS "dl")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,")
+set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":")
+set(CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG "-Wl,-rpath-link,")
+set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-Wl,-soname,")
+set(CMAKE_EXE_EXPORTS_C_FLAG "-Wl,--export-dynamic")
+
+# Shared libraries with no builtin soname may not be linked safely by
+# specifying the file path.
+set(CMAKE_PLATFORM_USES_PATH_WHEN_NO_SONAME 1)
+
+# Initialize C link type selection flags.  These flags are used when
+# building a shared library, shared module, or executable that links
+# to other libraries to select whether to use the static or shared
+# versions of the libraries.
+foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+  set(CMAKE_${type}_LINK_STATIC_C_FLAGS "-Wl,-Bstatic")
+  set(CMAKE_${type}_LINK_DYNAMIC_C_FLAGS "-Wl,-Bdynamic")
+endforeach()
+
+# Debian policy requires that shared libraries be installed without
+# executable permission.  Fedora policy requires that shared libraries
+# be installed with the executable permission.  Since the native tools
+# create shared libraries with execute permission in the first place a
+# reasonable policy seems to be to install with execute permission by
+# default.  In order to support debian packages we provide an option
+# here.  The option default is based on the current distribution, but
+# packagers can set it explicitly on the command line.
+if(DEFINED CMAKE_INSTALL_SO_NO_EXE)
+  # Store the decision variable in the cache.  This preserves any
+  # setting the user provides on the command line.
+  set(CMAKE_INSTALL_SO_NO_EXE "${CMAKE_INSTALL_SO_NO_EXE}" CACHE INTERNAL
+    "Install .so files without execute permission.")
+else()
+  # Store the decision variable as an internal cache entry to avoid
+  # checking the platform every time.  This option is advanced enough
+  # that only package maintainers should need to adjust it.  They are
+  # capable of providing a setting on the command line.
+  if(EXISTS "/etc/debian_version")
+    set(CMAKE_INSTALL_SO_NO_EXE 1 CACHE INTERNAL
+      "Install .so files without execute permission.")
+  else()
+    set(CMAKE_INSTALL_SO_NO_EXE 0 CACHE INTERNAL
+      "Install .so files without execute permission.")
+  endif()
+endif()
+
+# Match multiarch library directory names.
+set(CMAKE_LIBRARY_ARCHITECTURE_REGEX "[a-z0-9_]+(-[a-z0-9_]+)?-linux-gnu[a-z0-9_]*")
+
+include(Platform/UnixPaths)
+
+# Debian has lib64 paths only for compatibility so they should not be
+# searched.
+if(NOT CMAKE_CROSSCOMPILING AND EXISTS "/etc/debian_version")
+  set_property(GLOBAL PROPERTY FIND_LIBRARY_USE_LIB64_PATHS FALSE)
+endif()
diff --git a/share/cmake-3.2/Modules/Platform/MP-RAS.cmake b/share/cmake-3.6/Modules/Platform/MP-RAS.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/MP-RAS.cmake
rename to share/cmake-3.6/Modules/Platform/MP-RAS.cmake
diff --git a/share/cmake-3.2/Modules/Platform/MirBSD.cmake b/share/cmake-3.6/Modules/Platform/MirBSD.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/MirBSD.cmake
rename to share/cmake-3.6/Modules/Platform/MirBSD.cmake
diff --git a/share/cmake-3.2/Modules/Platform/NetBSD.cmake b/share/cmake-3.6/Modules/Platform/NetBSD.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/NetBSD.cmake
rename to share/cmake-3.6/Modules/Platform/NetBSD.cmake
diff --git a/share/cmake-3.2/Modules/Platform/OSF1.cmake b/share/cmake-3.6/Modules/Platform/OSF1.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/OSF1.cmake
rename to share/cmake-3.6/Modules/Platform/OSF1.cmake
diff --git a/share/cmake-3.2/Modules/Platform/OpenBSD.cmake b/share/cmake-3.6/Modules/Platform/OpenBSD.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/OpenBSD.cmake
rename to share/cmake-3.6/Modules/Platform/OpenBSD.cmake
diff --git a/share/cmake-3.2/Modules/Platform/OpenVMS.cmake b/share/cmake-3.6/Modules/Platform/OpenVMS.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/OpenVMS.cmake
rename to share/cmake-3.6/Modules/Platform/OpenVMS.cmake
diff --git a/share/cmake-3.2/Modules/Platform/QNX.cmake b/share/cmake-3.6/Modules/Platform/QNX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/QNX.cmake
rename to share/cmake-3.6/Modules/Platform/QNX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/RISCos.cmake b/share/cmake-3.6/Modules/Platform/RISCos.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/RISCos.cmake
rename to share/cmake-3.6/Modules/Platform/RISCos.cmake
diff --git a/share/cmake-3.2/Modules/Platform/SCO_SV.cmake b/share/cmake-3.6/Modules/Platform/SCO_SV.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/SCO_SV.cmake
rename to share/cmake-3.6/Modules/Platform/SCO_SV.cmake
diff --git a/share/cmake-3.2/Modules/Platform/SINIX.cmake b/share/cmake-3.6/Modules/Platform/SINIX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/SINIX.cmake
rename to share/cmake-3.6/Modules/Platform/SINIX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/SunOS-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/SunOS-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/SunOS-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/SunOS-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/SunOS-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/SunOS-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/SunOS-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/SunOS-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/SunOS-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/SunOS-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/SunOS-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/SunOS-GNU-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/SunOS-GNU.cmake b/share/cmake-3.6/Modules/Platform/SunOS-GNU.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/SunOS-GNU.cmake
rename to share/cmake-3.6/Modules/Platform/SunOS-GNU.cmake
diff --git a/share/cmake-3.6/Modules/Platform/SunOS-PathScale-C.cmake b/share/cmake-3.6/Modules/Platform/SunOS-PathScale-C.cmake
new file mode 100644
index 0000000..2f78da1
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/SunOS-PathScale-C.cmake
@@ -0,0 +1,2 @@
+include(Platform/SunOS-PathScale)
+__sunos_compiler_pathscale(C)
diff --git a/share/cmake-3.6/Modules/Platform/SunOS-PathScale-CXX.cmake b/share/cmake-3.6/Modules/Platform/SunOS-PathScale-CXX.cmake
new file mode 100644
index 0000000..bb79d86
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/SunOS-PathScale-CXX.cmake
@@ -0,0 +1,2 @@
+include(Platform/SunOS-PathScale)
+__sunos_compiler_pathscale(CXX)
diff --git a/share/cmake-3.6/Modules/Platform/SunOS-PathScale-Fortran.cmake b/share/cmake-3.6/Modules/Platform/SunOS-PathScale-Fortran.cmake
new file mode 100644
index 0000000..3c202f7
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/SunOS-PathScale-Fortran.cmake
@@ -0,0 +1,2 @@
+include(Platform/SunOS-PathScale)
+__sunos_compiler_pathscale(Fortran)
diff --git a/share/cmake-3.6/Modules/Platform/SunOS-PathScale.cmake b/share/cmake-3.6/Modules/Platform/SunOS-PathScale.cmake
new file mode 100644
index 0000000..1afe56a
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/SunOS-PathScale.cmake
@@ -0,0 +1,31 @@
+
+#=============================================================================
+# Copyright 2016 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__SUNOS_COMPILER_PATHSCALE)
+  return()
+endif()
+set(__SUNOS_COMPILER_PATHSCALE 1)
+
+macro(__sunos_compiler_pathscale lang)
+  # Shared library compile and link flags.
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "-fPIC")
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "-fPIE")
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "-fPIC")
+  set(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS "-shared")
+
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG "-Wl,-R")
+  set(CMAKE_SHARED_LIBRARY_RUNTIME_${lang}_FLAG_SEP ":")
+  set(CMAKE_SHARED_LIBRARY_SONAME_${lang}_FLAG "-Wl,-h")
+endmacro()
diff --git a/share/cmake-3.6/Modules/Platform/SunOS.cmake b/share/cmake-3.6/Modules/Platform/SunOS.cmake
new file mode 100644
index 0000000..58398c0
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/SunOS.cmake
@@ -0,0 +1,18 @@
+if(CMAKE_SYSTEM MATCHES "SunOS-4")
+   set(CMAKE_C_COMPILE_OPTIONS_PIC "-PIC")
+   set(CMAKE_C_COMPILE_OPTIONS_PIE "-PIE")
+   set(CMAKE_SHARED_LIBRARY_C_FLAGS "-PIC")
+   set(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared -Wl,-r")
+   set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-R")
+   set(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":")
+endif()
+
+include(Platform/UnixPaths)
+
+# The Sun linker needs to find transitive shared library dependencies
+# in the -L path.
+set(CMAKE_LINK_DEPENDENT_LIBRARY_DIRS 1)
+
+# Shared libraries with no builtin soname may not be linked safely by
+# specifying the file path.
+set(CMAKE_PLATFORM_USES_PATH_WHEN_NO_SONAME 1)
diff --git a/share/cmake-3.2/Modules/Platform/Tru64.cmake b/share/cmake-3.6/Modules/Platform/Tru64.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Tru64.cmake
rename to share/cmake-3.6/Modules/Platform/Tru64.cmake
diff --git a/share/cmake-3.2/Modules/Platform/ULTRIX.cmake b/share/cmake-3.6/Modules/Platform/ULTRIX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/ULTRIX.cmake
rename to share/cmake-3.6/Modules/Platform/ULTRIX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/UNIX_SV.cmake b/share/cmake-3.6/Modules/Platform/UNIX_SV.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/UNIX_SV.cmake
rename to share/cmake-3.6/Modules/Platform/UNIX_SV.cmake
diff --git a/share/cmake-3.2/Modules/Platform/UnixPaths.cmake b/share/cmake-3.6/Modules/Platform/UnixPaths.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/UnixPaths.cmake
rename to share/cmake-3.6/Modules/Platform/UnixPaths.cmake
diff --git a/share/cmake-3.2/Modules/Platform/UnixWare.cmake b/share/cmake-3.6/Modules/Platform/UnixWare.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/UnixWare.cmake
rename to share/cmake-3.6/Modules/Platform/UnixWare.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Borland-C.cmake b/share/cmake-3.6/Modules/Platform/Windows-Borland-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Borland-C.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Borland-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Borland-CXX.cmake b/share/cmake-3.6/Modules/Platform/Windows-Borland-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Borland-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Borland-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-CXX.cmake b/share/cmake-3.6/Modules/Platform/Windows-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Clang-C.cmake b/share/cmake-3.6/Modules/Platform/Windows-Clang-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Clang-C.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Clang-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Clang-CXX.cmake b/share/cmake-3.6/Modules/Platform/Windows-Clang-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Clang-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Clang-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Clang.cmake b/share/cmake-3.6/Modules/Platform/Windows-Clang.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Clang.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Clang.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Embarcadero-C.cmake b/share/cmake-3.6/Modules/Platform/Windows-Embarcadero-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Embarcadero-C.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Embarcadero-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Embarcadero-CXX.cmake b/share/cmake-3.6/Modules/Platform/Windows-Embarcadero-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Embarcadero-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Embarcadero-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Windows-Embarcadero.cmake b/share/cmake-3.6/Modules/Platform/Windows-Embarcadero.cmake
new file mode 100644
index 0000000..102e3a6
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Windows-Embarcadero.cmake
@@ -0,0 +1,141 @@
+
+#=============================================================================
+# Copyright 2002-2012 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__WINDOWS_EMBARCADERO)
+  return()
+endif()
+set(__WINDOWS_EMBARCADERO 1)
+
+set(BORLAND 1)
+
+if("${CMAKE_${_lang}_COMPILER_VERSION}" VERSION_LESS 6.30)
+  # Borland target type flags (bcc32 -h -t):
+  set(_tW "-tW")       # -tW  GUI App         (implies -U__CONSOLE__)
+  set(_tC "-tWC")      # -tWC Console App     (implies -D__CONSOLE__=1)
+  set(_tD "-tWD")      # -tWD Build a DLL     (implies -D__DLL__=1 -D_DLL=1)
+  set(_tM "-tWM")      # -tWM Enable threads  (implies -D__MT__=1 -D_MT=1)
+  set(_tR "-tWR -tW-") # -tWR Use DLL runtime (implies -D_RTLDLL, and '-tW' too!!)
+  # Notes:
+  #  - The flags affect linking so we pass them to the linker.
+  #  - The flags affect preprocessing so we pass them to the compiler.
+  #  - Since '-tWR' implies '-tW' we use '-tWR -tW-' instead.
+  #  - Since '-tW-' disables '-tWD' we use '-tWR -tW- -tWD' for DLLs.
+else()
+  set(EMBARCADERO 1)
+  set(_tC "-tC") # Target is a console application
+  set(_tD "-tD") # Target is a shared library
+  set(_tM "-tM") # Target is multi-threaded
+  set(_tR "-tR") # Target uses the dynamic RTL
+  set(_tW "-tW") # Target is a Windows application
+endif()
+set(_COMPILE_C "-c")
+set(_COMPILE_CXX "-P -c")
+
+set(CMAKE_LIBRARY_PATH_FLAG "-L")
+set(CMAKE_LINK_LIBRARY_FLAG "")
+
+set(CMAKE_FIND_LIBRARY_SUFFIXES "-bcc.lib" ".lib")
+
+# uncomment these out to debug makefiles
+#set(CMAKE_START_TEMP_FILE "")
+#set(CMAKE_END_TEMP_FILE "")
+#set(CMAKE_VERBOSE_MAKEFILE 1)
+
+# Borland cannot handle + in the file name, so mangle object file name
+set (CMAKE_MANGLE_OBJECT_FILE_NAMES "ON")
+
+# extra flags for a win32 exe
+set(CMAKE_CREATE_WIN32_EXE "${_tW}" )
+# extra flags for a console app
+set(CMAKE_CREATE_CONSOLE_EXE "${_tC}" )
+
+set (CMAKE_BUILD_TYPE Debug CACHE STRING
+     "Choose the type of build, options are: Debug Release RelWithDebInfo MinSizeRel.")
+
+set (CMAKE_EXE_LINKER_FLAGS_INIT "${_tM} -lS:1048576 -lSc:4098 -lH:1048576 -lHc:8192 ")
+set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "-v")
+set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "-v")
+set (CMAKE_SHARED_LINKER_FLAGS_INIT ${CMAKE_EXE_LINKER_FLAGS_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT ${CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_INIT ${CMAKE_SHARED_LINKER_FLAGS_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_DEBUG_INIT ${CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT})
+
+# The Borland link tool does not support multiple concurrent
+# invocations within a single working directory.
+if(NOT DEFINED CMAKE_JOB_POOL_LINK)
+  set(CMAKE_JOB_POOL_LINK BCC32LinkPool)
+  get_property(_bccjp GLOBAL PROPERTY JOB_POOLS)
+  if(NOT _bccjp MATCHES "BCC32LinkPool=")
+      set_property(GLOBAL APPEND PROPERTY JOB_POOLS BCC32LinkPool=1)
+  endif()
+  unset(_bccjp)
+endif()
+
+macro(__embarcadero_language lang)
+  set(CMAKE_${lang}_COMPILE_OPTIONS_DLL "${_tD}") # Note: This variable is a ';' separated list
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "${_tD}") # ... while this is a space separated string.
+  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_INCLUDES 1)
+
+  # compile a source file into an object file
+  # place <DEFINES> outside the response file because Borland refuses
+  # to parse quotes from the response file.
+  set(CMAKE_${lang}_COMPILE_OBJECT
+    "<CMAKE_${lang}_COMPILER> ${_tR} -DWIN32 <DEFINES> <INCLUDES> <FLAGS> -o<OBJECT> ${_COMPILE_${lang}} <SOURCE>"
+    )
+
+  set(CMAKE_${lang}_LINK_EXECUTABLE
+    "<CMAKE_${lang}_COMPILER> ${_tR} -e<TARGET> <LINK_FLAGS> <FLAGS> ${CMAKE_START_TEMP_FILE} <LINK_LIBRARIES> <OBJECTS>${CMAKE_END_TEMP_FILE}"
+    # "implib -c -w <TARGET_IMPLIB> <TARGET>"
+    )
+
+  # place <DEFINES> outside the response file because Borland refuses
+  # to parse quotes from the response file.
+  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE
+    "cpp32 -DWIN32 <DEFINES> <INCLUDES> <FLAGS> -o<PREPROCESSED_SOURCE> ${_COMPILE_${lang}} <SOURCE>"
+    )
+  # Borland >= 5.6 allows -P option for cpp32, <= 5.5 does not
+
+  # Create a module library.
+  set(CMAKE_${lang}_CREATE_SHARED_MODULE
+    "<CMAKE_${lang}_COMPILER> ${_tR} ${_tD} ${CMAKE_START_TEMP_FILE}-e<TARGET> <LINK_FLAGS> <LINK_LIBRARIES> <OBJECTS>${CMAKE_END_TEMP_FILE}"
+    )
+
+  # Create an import library for another target.
+  set(CMAKE_${lang}_CREATE_IMPORT_LIBRARY
+    "implib -c -w <TARGET_IMPLIB> <TARGET>"
+    )
+
+  # Create a shared library.
+  # First create a module and then its import library.
+  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
+    ${CMAKE_${lang}_CREATE_SHARED_MODULE}
+    ${CMAKE_${lang}_CREATE_IMPORT_LIBRARY}
+    )
+
+  # create a static library
+  set(CMAKE_${lang}_CREATE_STATIC_LIBRARY
+    "tlib ${CMAKE_START_TEMP_FILE}/p512 <LINK_FLAGS> /a <TARGET_QUOTED> <OBJECTS>${CMAKE_END_TEMP_FILE}"
+    )
+
+  # Initial configuration flags.
+  set(CMAKE_${lang}_FLAGS_INIT "${_tM}")
+  set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-Od -v")
+  set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-O1 -DNDEBUG")
+  set(CMAKE_${lang}_FLAGS_RELEASE_INIT "-O2 -DNDEBUG")
+  set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-Od")
+  set(CMAKE_${lang}_STANDARD_LIBRARIES_INIT "import32.lib")
+endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Windows-G95-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Windows-G95-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-G95-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-G95-Fortran.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-GNU-C-ABI.cmake b/share/cmake-3.6/Modules/Platform/Windows-GNU-C-ABI.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-GNU-C-ABI.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-GNU-C-ABI.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-GNU-C.cmake b/share/cmake-3.6/Modules/Platform/Windows-GNU-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-GNU-C.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-GNU-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-GNU-CXX-ABI.cmake b/share/cmake-3.6/Modules/Platform/Windows-GNU-CXX-ABI.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-GNU-CXX-ABI.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-GNU-CXX-ABI.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-GNU-CXX.cmake b/share/cmake-3.6/Modules/Platform/Windows-GNU-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-GNU-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-GNU-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-GNU-Fortran-ABI.cmake b/share/cmake-3.6/Modules/Platform/Windows-GNU-Fortran-ABI.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-GNU-Fortran-ABI.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-GNU-Fortran-ABI.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-GNU-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Windows-GNU-Fortran.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-GNU-Fortran.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-GNU-Fortran.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Windows-GNU.cmake b/share/cmake-3.6/Modules/Platform/Windows-GNU.cmake
new file mode 100644
index 0000000..d8a423e
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Windows-GNU.cmake
@@ -0,0 +1,200 @@
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__WINDOWS_GNU)
+  return()
+endif()
+set(__WINDOWS_GNU 1)
+
+set(CMAKE_IMPORT_LIBRARY_PREFIX "lib")
+set(CMAKE_SHARED_LIBRARY_PREFIX "lib")
+set(CMAKE_SHARED_MODULE_PREFIX  "lib")
+set(CMAKE_STATIC_LIBRARY_PREFIX "lib")
+
+set(CMAKE_EXECUTABLE_SUFFIX     ".exe")
+set(CMAKE_IMPORT_LIBRARY_SUFFIX ".dll.a")
+set(CMAKE_SHARED_LIBRARY_SUFFIX ".dll")
+set(CMAKE_SHARED_MODULE_SUFFIX  ".dll")
+set(CMAKE_STATIC_LIBRARY_SUFFIX ".a")
+
+if(MSYS OR MINGW)
+  set(CMAKE_EXTRA_LINK_EXTENSIONS ".lib") # MinGW can also link to a MS .lib
+endif()
+
+if(MINGW)
+  set(CMAKE_FIND_LIBRARY_PREFIXES "lib" "")
+  set(CMAKE_FIND_LIBRARY_SUFFIXES ".dll" ".dll.a" ".a" ".lib")
+  set(CMAKE_C_STANDARD_LIBRARIES_INIT "-lkernel32 -luser32 -lgdi32 -lwinspool -lshell32 -lole32 -loleaut32 -luuid -lcomdlg32 -ladvapi32")
+  set(CMAKE_CXX_STANDARD_LIBRARIES_INIT "${CMAKE_C_STANDARD_LIBRARIES_INIT}")
+endif()
+
+set(CMAKE_DL_LIBS "")
+set(CMAKE_LIBRARY_PATH_FLAG "-L")
+set(CMAKE_LINK_LIBRARY_FLAG "-l")
+set(CMAKE_LINK_DEF_FILE_FLAG "") # Empty string: passing the file is enough
+set(CMAKE_LINK_LIBRARY_SUFFIX "")
+set(CMAKE_CREATE_WIN32_EXE  "-mwindows")
+
+set(CMAKE_GNULD_IMAGE_VERSION
+  "-Wl,--major-image-version,<TARGET_VERSION_MAJOR>,--minor-image-version,<TARGET_VERSION_MINOR>")
+
+# Check if GNU ld is too old to support @FILE syntax.
+set(__WINDOWS_GNU_LD_RESPONSE 1)
+execute_process(COMMAND ld -v OUTPUT_VARIABLE _help ERROR_VARIABLE _help)
+if("${_help}" MATCHES "GNU ld .* 2\\.1[1-6]")
+  set(__WINDOWS_GNU_LD_RESPONSE 0)
+endif()
+
+if(NOT CMAKE_GENERATOR_RC AND CMAKE_GENERATOR MATCHES "Unix Makefiles")
+  set(CMAKE_GENERATOR_RC windres)
+endif()
+
+macro(__windows_compiler_gnu lang)
+
+  if(MSYS OR MINGW)
+    # Create archiving rules to support large object file lists for static libraries.
+    set(CMAKE_${lang}_ARCHIVE_CREATE "<CMAKE_AR> qc <TARGET> <LINK_FLAGS> <OBJECTS>")
+    set(CMAKE_${lang}_ARCHIVE_APPEND "<CMAKE_AR> q  <TARGET> <LINK_FLAGS> <OBJECTS>")
+    set(CMAKE_${lang}_ARCHIVE_FINISH "<CMAKE_RANLIB> <TARGET>")
+
+    # Initialize C link type selection flags.  These flags are used when
+    # building a shared library, shared module, or executable that links
+    # to other libraries to select whether to use the static or shared
+    # versions of the libraries.
+    foreach(type SHARED_LIBRARY SHARED_MODULE EXE)
+      set(CMAKE_${type}_LINK_STATIC_${lang}_FLAGS "-Wl,-Bstatic")
+      set(CMAKE_${type}_LINK_DYNAMIC_${lang}_FLAGS "-Wl,-Bdynamic")
+    endforeach()
+  endif()
+
+  # No -fPIC on Windows
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIC "")
+  set(CMAKE_${lang}_COMPILE_OPTIONS_PIE "")
+  set(CMAKE_SHARED_LIBRARY_${lang}_FLAGS "")
+
+  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_OBJECTS ${__WINDOWS_GNU_LD_RESPONSE})
+  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_LIBRARIES ${__WINDOWS_GNU_LD_RESPONSE})
+  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_INCLUDES 1)
+
+  # We prefer "@" for response files but it is not supported by gcc 3.
+  execute_process(COMMAND ${CMAKE_${lang}_COMPILER} --version OUTPUT_VARIABLE _ver ERROR_VARIABLE _ver)
+  if("${_ver}" MATCHES "\\(GCC\\) 3\\.")
+    if("${lang}" STREQUAL "Fortran")
+      # The GNU Fortran compiler reports an error:
+      #   no input files; unwilling to write output files
+      # when the response file is passed with "-Wl,@".
+      set(CMAKE_Fortran_USE_RESPONSE_FILE_FOR_OBJECTS 0)
+    else()
+      # Use "-Wl,@" to pass the response file to the linker.
+      set(CMAKE_${lang}_RESPONSE_FILE_LINK_FLAG "-Wl,@")
+    endif()
+    # The GNU 3.x compilers do not support response files (only linkers).
+    set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_INCLUDES 0)
+    # Link libraries are generated only for the front-end.
+    set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_LIBRARIES 0)
+  else()
+    # Use "@" to pass the response file to the front-end.
+    set(CMAKE_${lang}_RESPONSE_FILE_LINK_FLAG "@")
+  endif()
+
+  # Binary link rules.
+  set(CMAKE_${lang}_CREATE_SHARED_MODULE
+    "<CMAKE_${lang}_COMPILER> <CMAKE_SHARED_MODULE_${lang}_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS> -o <TARGET> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
+  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
+    "<CMAKE_${lang}_COMPILER> <CMAKE_SHARED_LIBRARY_${lang}_FLAGS> <LANGUAGE_COMPILE_FLAGS> <LINK_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS> -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <OBJECTS> <LINK_LIBRARIES>")
+  set(CMAKE_${lang}_LINK_EXECUTABLE
+    "<CMAKE_${lang}_COMPILER> <FLAGS> <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> -Wl,--out-implib,<TARGET_IMPLIB> ${CMAKE_GNULD_IMAGE_VERSION} <LINK_LIBRARIES>")
+
+  list(APPEND CMAKE_${lang}_ABI_FILES "Platform/Windows-GNU-${lang}-ABI")
+
+  # Support very long lists of object files.
+  # TODO: check for which gcc versions this is still needed, not needed for gcc >= 4.4.
+  # Ninja generator doesn't support this work around.
+  if("${CMAKE_${lang}_RESPONSE_FILE_LINK_FLAG}" STREQUAL "@" AND NOT CMAKE_GENERATOR MATCHES "Ninja")
+    foreach(rule CREATE_SHARED_MODULE CREATE_SHARED_LIBRARY LINK_EXECUTABLE)
+      # The gcc/collect2/ld toolchain does not use response files
+      # internally so we cannot pass long object lists.  Instead pass
+      # the object file list in a response file to the archiver to put
+      # them in a temporary archive.  Hand the archive to the linker.
+      string(REPLACE "<OBJECTS>" "-Wl,--whole-archive <OBJECT_DIR>/objects.a -Wl,--no-whole-archive"
+        CMAKE_${lang}_${rule} "${CMAKE_${lang}_${rule}}")
+      set(CMAKE_${lang}_${rule}
+        "<CMAKE_COMMAND> -E remove -f <OBJECT_DIR>/objects.a"
+        "<CMAKE_AR> cr <OBJECT_DIR>/objects.a <OBJECTS>"
+        "${CMAKE_${lang}_${rule}}"
+        )
+    endforeach()
+  endif()
+
+  if(NOT CMAKE_RC_COMPILER_INIT AND NOT CMAKE_GENERATOR_RC)
+    set(CMAKE_RC_COMPILER_INIT windres)
+  endif()
+
+  enable_language(RC)
+endmacro()
+
+macro(__windows_compiler_gnu_abi lang)
+  if(CMAKE_NO_GNUtoMS)
+    set(CMAKE_GNUtoMS 0)
+  else()
+    option(CMAKE_GNUtoMS "Convert GNU import libraries to MS format (requires Visual Studio)" OFF)
+  endif()
+
+  if(CMAKE_GNUtoMS AND NOT CMAKE_GNUtoMS_LIB)
+    # Find MS development environment setup script for this architecture.
+    if("${CMAKE_SIZEOF_VOID_P}" EQUAL 4)
+      find_program(CMAKE_GNUtoMS_VCVARS NAMES vcvars32.bat
+        DOC "Visual Studio vcvars32.bat"
+        PATHS
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\12.0\\Setup\\VC;ProductDir]/bin"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\11.0\\Setup\\VC;ProductDir]/bin"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\10.0\\Setup\\VC;ProductDir]/bin"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\9.0\\Setup\\VC;ProductDir]/bin"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\8.0\\Setup\\VC;ProductDir]/bin"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\7.1\\Setup\\VC;ProductDir]/bin"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\6.0\\Setup\\Microsoft Visual C++;ProductDir]/bin"
+        )
+      set(CMAKE_GNUtoMS_ARCH x86)
+    elseif("${CMAKE_SIZEOF_VOID_P}" EQUAL 8)
+      find_program(CMAKE_GNUtoMS_VCVARS NAMES vcvars64.bat vcvarsamd64.bat
+        DOC "Visual Studio vcvarsamd64.bat"
+        PATHS
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\12.0\\Setup\\VC;ProductDir]/bin/amd64"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\11.0\\Setup\\VC;ProductDir]/bin/amd64"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\10.0\\Setup\\VC;ProductDir]/bin/amd64"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\9.0\\Setup\\VC;ProductDir]/bin/amd64"
+        "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\VisualStudio\\8.0\\Setup\\VC;ProductDir]/bin/amd64"
+        )
+      set(CMAKE_GNUtoMS_ARCH amd64)
+    endif()
+    set_property(CACHE CMAKE_GNUtoMS_VCVARS PROPERTY ADVANCED 1)
+    if(CMAKE_GNUtoMS_VCVARS)
+      # Create helper script to run lib.exe from MS environment.
+      string(REPLACE "/" "\\" CMAKE_GNUtoMS_BAT "${CMAKE_GNUtoMS_VCVARS}")
+      set(CMAKE_GNUtoMS_LIB ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeGNUtoMS_lib.bat)
+      configure_file(${CMAKE_ROOT}/Modules/Platform/GNUtoMS_lib.bat.in ${CMAKE_GNUtoMS_LIB})
+    else()
+      message(WARNING "Disabling CMAKE_GNUtoMS option because CMAKE_GNUtoMS_VCVARS is not set.")
+      set(CMAKE_GNUtoMS 0)
+    endif()
+  endif()
+
+  if(CMAKE_GNUtoMS)
+    # Teach CMake how to create a MS import library at link time.
+    set(CMAKE_${lang}_GNUtoMS_RULE " -Wl,--output-def,<TARGET_NAME>.def"
+      "<CMAKE_COMMAND> -Dlib=\"${CMAKE_GNUtoMS_LIB}\" -Ddef=<TARGET_NAME>.def -Ddll=<TARGET> -Dimp=<TARGET_IMPLIB> -P \"${CMAKE_ROOT}/Modules/Platform/GNUtoMS_lib.cmake\""
+      )
+  endif()
+endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Intel-ASM.cmake b/share/cmake-3.6/Modules/Platform/Windows-Intel-ASM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Intel-ASM.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Intel-ASM.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Intel-C.cmake b/share/cmake-3.6/Modules/Platform/Windows-Intel-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Intel-C.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Intel-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Intel-CXX.cmake b/share/cmake-3.6/Modules/Platform/Windows-Intel-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Intel-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Intel-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Windows-Intel-Fortran.cmake b/share/cmake-3.6/Modules/Platform/Windows-Intel-Fortran.cmake
new file mode 100644
index 0000000..1b93db8
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Windows-Intel-Fortran.cmake
@@ -0,0 +1,11 @@
+include(Platform/Windows-Intel)
+set(CMAKE_BUILD_TYPE_INIT Debug)
+set(_COMPILE_Fortran " /fpp")
+set(CMAKE_Fortran_MODDIR_FLAG "-module:")
+set(CMAKE_Fortran_STANDARD_LIBRARIES_INIT "user32.lib")
+__windows_compiler_intel(Fortran)
+set (CMAKE_Fortran_FLAGS_INIT "/W1 /nologo /fpp /libs:dll /threads")
+set (CMAKE_Fortran_FLAGS_DEBUG_INIT "/Od /debug:full /dbglibs")
+set (CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "/O1 /DNDEBUG")
+set (CMAKE_Fortran_FLAGS_RELEASE_INIT "/O2 /DNDEBUG")
+set (CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "/O2 /debug:full /DNDEBUG")
diff --git a/share/cmake-3.2/Modules/Platform/Windows-Intel.cmake b/share/cmake-3.6/Modules/Platform/Windows-Intel.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-Intel.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-Intel.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-MSVC-C.cmake b/share/cmake-3.6/Modules/Platform/Windows-MSVC-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-MSVC-C.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-MSVC-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Windows-MSVC-CXX.cmake b/share/cmake-3.6/Modules/Platform/Windows-MSVC-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-MSVC-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-MSVC-CXX.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Windows-MSVC.cmake b/share/cmake-3.6/Modules/Platform/Windows-MSVC.cmake
new file mode 100644
index 0000000..6c254ed
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Windows-MSVC.cmake
@@ -0,0 +1,328 @@
+
+#=============================================================================
+# Copyright 2001-2012 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This module is shared by multiple languages; use include blocker.
+if(__WINDOWS_MSVC)
+  return()
+endif()
+set(__WINDOWS_MSVC 1)
+
+set(CMAKE_LIBRARY_PATH_FLAG "-LIBPATH:")
+set(CMAKE_LINK_LIBRARY_FLAG "")
+set(MSVC 1)
+
+# hack: if a new cmake (which uses CMAKE_LINKER) runs on an old build tree
+# (where link was hardcoded) and where CMAKE_LINKER isn't in the cache
+# and still cmake didn't fail in CMakeFindBinUtils.cmake (because it isn't rerun)
+# hardcode CMAKE_LINKER here to link, so it behaves as it did before, Alex
+if(NOT DEFINED CMAKE_LINKER)
+   set(CMAKE_LINKER link)
+endif()
+
+if(CMAKE_VERBOSE_MAKEFILE)
+  set(CMAKE_CL_NOLOGO)
+else()
+  set(CMAKE_CL_NOLOGO "/nologo")
+endif()
+
+if(CMAKE_SYSTEM_NAME STREQUAL "WindowsCE")
+  set(CMAKE_CREATE_WIN32_EXE "/entry:WinMainCRTStartup")
+  set(CMAKE_CREATE_CONSOLE_EXE "/entry:mainACRTStartup")
+  set(_PLATFORM_LINK_FLAGS " /subsystem:windowsce")
+else()
+  set(CMAKE_CREATE_WIN32_EXE "/subsystem:windows")
+  set(CMAKE_CREATE_CONSOLE_EXE "/subsystem:console")
+  set(_PLATFORM_LINK_FLAGS "")
+endif()
+
+set(CMAKE_SUPPORT_WINDOWS_EXPORT_ALL_SYMBOLS 1)
+if(NOT CMAKE_NO_BUILD_TYPE AND CMAKE_GENERATOR MATCHES "Visual Studio")
+  set (CMAKE_NO_BUILD_TYPE 1)
+endif()
+
+if("${CMAKE_GENERATOR}" MATCHES "Visual Studio")
+  set(MSVC_IDE 1)
+else()
+  set(MSVC_IDE 0)
+endif()
+
+if(NOT MSVC_VERSION)
+  if(CMAKE_C_SIMULATE_VERSION)
+    set(_compiler_version ${CMAKE_C_SIMULATE_VERSION})
+  elseif(CMAKE_CXX_SIMULATE_VERSION)
+    set(_compiler_version ${CMAKE_CXX_SIMULATE_VERSION})
+  elseif(CMAKE_Fortran_SIMULATE_VERSION)
+    set(_compiler_version ${CMAKE_Fortran_SIMULATE_VERSION})
+  elseif(CMAKE_C_COMPILER_VERSION)
+    set(_compiler_version ${CMAKE_C_COMPILER_VERSION})
+  else()
+    set(_compiler_version ${CMAKE_CXX_COMPILER_VERSION})
+  endif()
+  if("${_compiler_version}" MATCHES "^([0-9]+)\\.([0-9]+)")
+    math(EXPR MSVC_VERSION "${CMAKE_MATCH_1}*100 + ${CMAKE_MATCH_2}")
+  else()
+    message(FATAL_ERROR "MSVC compiler version not detected properly: ${_compiler_version}")
+  endif()
+
+  set(MSVC10)
+  set(MSVC11)
+  set(MSVC12)
+  set(MSVC14)
+  set(MSVC60)
+  set(MSVC70)
+  set(MSVC71)
+  set(MSVC80)
+  set(MSVC90)
+  set(CMAKE_COMPILER_2005)
+  set(CMAKE_COMPILER_SUPPORTS_PDBTYPE)
+  if(NOT "${_compiler_version}" VERSION_LESS 19)
+    set(MSVC14 1)
+  elseif(NOT "${_compiler_version}" VERSION_LESS 18)
+    set(MSVC12 1)
+  elseif(NOT "${_compiler_version}" VERSION_LESS 17)
+    set(MSVC11 1)
+  elseif(NOT  "${_compiler_version}" VERSION_LESS 16)
+    set(MSVC10 1)
+  elseif(NOT  "${_compiler_version}" VERSION_LESS 15)
+    set(MSVC90 1)
+  elseif(NOT  "${_compiler_version}" VERSION_LESS 14)
+    set(MSVC80 1)
+    set(CMAKE_COMPILER_2005 1)
+  elseif(NOT  "${_compiler_version}" VERSION_LESS 13.10)
+    set(MSVC71 1)
+  elseif(NOT  "${_compiler_version}" VERSION_LESS 13)
+    set(MSVC70 1)
+  else()
+    set(MSVC60 1)
+    set(CMAKE_COMPILER_SUPPORTS_PDBTYPE 1)
+  endif()
+endif()
+
+if(MSVC_C_ARCHITECTURE_ID MATCHES 64 OR MSVC_CXX_ARCHITECTURE_ID MATCHES 64)
+  set(CMAKE_CL_64 1)
+else()
+  set(CMAKE_CL_64 0)
+endif()
+if(CMAKE_FORCE_WIN64 OR CMAKE_FORCE_IA64)
+  set(CMAKE_CL_64 1)
+endif()
+
+if("${MSVC_VERSION}" GREATER 1599)
+  set(MSVC_INCREMENTAL_DEFAULT ON)
+endif()
+
+# default to Debug builds
+set(CMAKE_BUILD_TYPE_INIT Debug)
+
+# Compute an architecture family from the architecture id.
+foreach(lang C CXX)
+  set(_MSVC_${lang}_ARCHITECTURE_FAMILY "${MSVC_${lang}_ARCHITECTURE_ID}")
+  if(_MSVC_${lang}_ARCHITECTURE_FAMILY MATCHES "^ARM")
+    set(_MSVC_${lang}_ARCHITECTURE_FAMILY "ARM")
+  elseif(_MSVC_${lang}_ARCHITECTURE_FAMILY MATCHES "^SH")
+    set(_MSVC_${lang}_ARCHITECTURE_FAMILY "SHx")
+  endif()
+endforeach()
+
+if(WINCE)
+  foreach(lang C CXX)
+    string(TOUPPER "${_MSVC_${lang}_ARCHITECTURE_FAMILY}" _MSVC_${lang}_ARCHITECTURE_FAMILY_UPPER)
+  endforeach()
+
+  if("${CMAKE_SYSTEM_VERSION}" MATCHES "^([0-9]+)\\.([0-9]+)")
+    math(EXPR _CE_VERSION "${CMAKE_MATCH_1}*100 + ${CMAKE_MATCH_2}")
+  elseif("${CMAKE_SYSTEM_VERSION}" STREQUAL "")
+    set(_CE_VERSION "500")
+  else()
+    message(FATAL_ERROR "Invalid Windows CE version: ${CMAKE_SYSTEM_VERSION}")
+  endif()
+
+  set(_PLATFORM_DEFINES "/D_WIN32_WCE=0x${_CE_VERSION} /DUNDER_CE /DWINCE")
+  set(_PLATFORM_DEFINES_C " /D${_MSVC_C_ARCHITECTURE_FAMILY} /D_${_MSVC_C_ARCHITECTURE_FAMILY_UPPER}_")
+  set(_PLATFORM_DEFINES_CXX " /D${_MSVC_CXX_ARCHITECTURE_FAMILY} /D_${_MSVC_CXX_ARCHITECTURE_FAMILY_UPPER}_")
+
+  set(_RTC1 "")
+  set(_FLAGS_C "")
+  set(_FLAGS_CXX " /GR /EHsc")
+
+  foreach(lang C CXX)
+    if(_MSVC_${lang}_ARCHITECTURE_FAMILY STREQUAL "ARM")
+      set(_PLATFORM_DEFINES_${lang} "${_PLATFORM_DEFINES_${lang}} /D${MSVC_${lang}_ARCHITECTURE_ID}")
+      if(MSVC_${lang}_ARCHITECTURE_ID MATCHES "^ARMV([45])I$")
+        set(_FLAGS_${lang} "${_FLAGS_${lang}} /QRarch${CMAKE_MATCH_1}T")
+      endif()
+    endif()
+  endforeach()
+
+  set(CMAKE_C_STANDARD_LIBRARIES_INIT "coredll.lib ole32.lib oleaut32.lib uuid.lib commctrl.lib")
+  set(CMAKE_EXE_LINKER_FLAGS_INIT "${CMAKE_EXE_LINKER_FLAGS_INIT} /NODEFAULTLIB:libc.lib /NODEFAULTLIB:oldnames.lib")
+
+  if (MSVC_VERSION LESS 1600)
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "${CMAKE_C_STANDARD_LIBRARIES_INIT} corelibc.lib")
+  endif ()
+elseif(WINDOWS_PHONE OR WINDOWS_STORE)
+  set(_PLATFORM_DEFINES "/DWIN32")
+  set(_FLAGS_C " /DUNICODE /D_UNICODE")
+  set(_FLAGS_CXX " /DUNICODE /D_UNICODE /GR /EHsc")
+  if(WINDOWS_STORE AND MSVC_VERSION GREATER 1899)
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "WindowsApp.lib")
+  elseif(WINDOWS_PHONE)
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "WindowsPhoneCore.lib RuntimeObject.lib PhoneAppModelHost.lib")
+  elseif(_MSVC_C_ARCHITECTURE_FAMILY STREQUAL "ARM" OR _MSVC_CXX_ARCHITECTURE_FAMILY STREQUAL "ARM")
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib")
+  else()
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib")
+  endif()
+else()
+  set(_PLATFORM_DEFINES "/DWIN32")
+
+  if(_MSVC_C_ARCHITECTURE_FAMILY STREQUAL "ARM" OR _MSVC_CXX_ARCHITECTURE_FAMILY STREQUAL "ARM")
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib")
+  elseif(MSVC_VERSION GREATER 1310)
+    if(CMAKE_VS_PLATFORM_TOOLSET MATCHES "v[0-9]+_clang_.*")
+      # Clang/C2 in MSVC14 Update 1 seems to not support -fsantinize (yet?)
+      # set(_RTC1 "-fsantinize=memory,safe-stack")
+      set(_FLAGS_CXX " -frtti -fexceptions")
+    else()
+      set(_RTC1 "/RTC1")
+      set(_FLAGS_CXX " /GR /EHsc")
+    endif()
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib gdi32.lib winspool.lib shell32.lib ole32.lib oleaut32.lib uuid.lib comdlg32.lib advapi32.lib")
+  else()
+    set(_RTC1 "/GZ")
+    set(_FLAGS_CXX " /GR /GX")
+    set(CMAKE_C_STANDARD_LIBRARIES_INIT "kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib")
+  endif()
+
+  if(MSVC_VERSION LESS 1310)
+    set(_FLAGS_C   " /Zm1000${_FLAGS_C}")
+    set(_FLAGS_CXX " /Zm1000${_FLAGS_CXX}")
+  endif()
+endif()
+
+set(CMAKE_CXX_STANDARD_LIBRARIES_INIT "${CMAKE_C_STANDARD_LIBRARIES_INIT}")
+
+# executable linker flags
+set (CMAKE_LINK_DEF_FILE_FLAG "/DEF:")
+# set the machine type
+if(MSVC_C_ARCHITECTURE_ID)
+  if(MSVC_C_ARCHITECTURE_ID MATCHES "^ARMV.I")
+    set(_MACHINE_ARCH_FLAG "/machine:THUMB")
+  elseif(_MSVC_C_ARCHITECTURE_FAMILY STREQUAL "ARM")
+    set(_MACHINE_ARCH_FLAG "/machine:ARM")
+  else()
+    set(_MACHINE_ARCH_FLAG "/machine:${MSVC_C_ARCHITECTURE_ID}")
+  endif()
+elseif(MSVC_CXX_ARCHITECTURE_ID)
+  if(MSVC_CXX_ARCHITECTURE_ID MATCHES "^ARMV.I")
+    set(_MACHINE_ARCH_FLAG "/machine:THUMB")
+  elseif(_MSVC_CXX_ARCHITECTURE_FAMILY STREQUAL "ARM")
+    set(_MACHINE_ARCH_FLAG "/machine:ARM")
+  else()
+    set(_MACHINE_ARCH_FLAG "/machine:${MSVC_CXX_ARCHITECTURE_ID}")
+  endif()
+elseif(MSVC_Fortran_ARCHITECTURE_ID)
+  set(_MACHINE_ARCH_FLAG "/machine:${MSVC_Fortran_ARCHITECTURE_ID}")
+endif()
+set(CMAKE_EXE_LINKER_FLAGS_INIT "${CMAKE_EXE_LINKER_FLAGS_INIT} ${_MACHINE_ARCH_FLAG}")
+set(CMAKE_STATIC_LINKER_FLAGS_INIT "${CMAKE_STATIC_LINKER_FLAGS_INIT} ${_MACHINE_ARCH_FLAG}")
+unset(_MACHINE_ARCH_FLAG)
+
+# add /debug and /INCREMENTAL:YES to DEBUG and RELWITHDEBINFO also add pdbtype
+# on versions that support it
+set( MSVC_INCREMENTAL_YES_FLAG "")
+if(NOT WINDOWS_PHONE AND NOT WINDOWS_STORE)
+  if(NOT MSVC_INCREMENTAL_DEFAULT)
+    set( MSVC_INCREMENTAL_YES_FLAG "/INCREMENTAL:YES")
+  else()
+    set(  MSVC_INCREMENTAL_YES_FLAG "/INCREMENTAL" )
+  endif()
+endif()
+
+if (CMAKE_COMPILER_SUPPORTS_PDBTYPE)
+  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug /pdbtype:sept ${MSVC_INCREMENTAL_YES_FLAG}")
+  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug /pdbtype:sept ${MSVC_INCREMENTAL_YES_FLAG}")
+else ()
+  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug ${MSVC_INCREMENTAL_YES_FLAG}")
+  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug ${MSVC_INCREMENTAL_YES_FLAG}")
+endif ()
+# for release and minsize release default to no incremental linking
+set(CMAKE_EXE_LINKER_FLAGS_MINSIZEREL_INIT "/INCREMENTAL:NO")
+set(CMAKE_EXE_LINKER_FLAGS_RELEASE_INIT "/INCREMENTAL:NO")
+
+# copy the EXE_LINKER flags to SHARED and MODULE linker flags
+# shared linker flags
+set (CMAKE_SHARED_LINKER_FLAGS_INIT ${CMAKE_EXE_LINKER_FLAGS_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT ${CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_RELEASE_INIT ${CMAKE_EXE_LINKER_FLAGS_RELEASE_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL_INIT ${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL_INIT})
+# module linker flags
+set (CMAKE_MODULE_LINKER_FLAGS_INIT ${CMAKE_SHARED_LINKER_FLAGS_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_DEBUG_INIT ${CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_RELEASE_INIT ${CMAKE_EXE_LINKER_FLAGS_RELEASE_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL_INIT ${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL_INIT})
+
+macro(__windows_compiler_msvc lang)
+  if(NOT MSVC_VERSION LESS 1400)
+    # for 2005 make sure the manifest is put in the dll with mt
+    set(_CMAKE_VS_LINK_DLL "<CMAKE_COMMAND> -E vs_link_dll --intdir=<OBJECT_DIR> --manifests <MANIFESTS> -- ")
+    set(_CMAKE_VS_LINK_EXE "<CMAKE_COMMAND> -E vs_link_exe --intdir=<OBJECT_DIR> --manifests <MANIFESTS> -- ")
+  endif()
+  set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
+    "${_CMAKE_VS_LINK_DLL}<CMAKE_LINKER> ${CMAKE_CL_NOLOGO} <OBJECTS> ${CMAKE_START_TEMP_FILE} /out:<TARGET> /implib:<TARGET_IMPLIB> /pdb:<TARGET_PDB> /dll /version:<TARGET_VERSION_MAJOR>.<TARGET_VERSION_MINOR>${_PLATFORM_LINK_FLAGS} <LINK_FLAGS> <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
+
+  set(CMAKE_${lang}_CREATE_SHARED_MODULE ${CMAKE_${lang}_CREATE_SHARED_LIBRARY})
+  set(CMAKE_${lang}_CREATE_STATIC_LIBRARY  "<CMAKE_LINKER> /lib ${CMAKE_CL_NOLOGO} <LINK_FLAGS> /out:<TARGET> <OBJECTS> ")
+
+  set(CMAKE_${lang}_COMPILE_OBJECT
+    "<CMAKE_${lang}_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO}${_COMPILE_${lang}} <DEFINES> <INCLUDES> <FLAGS> /Fo<OBJECT> /Fd<TARGET_COMPILE_PDB>${_FS_${lang}} -c <SOURCE>${CMAKE_END_TEMP_FILE}")
+  set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE
+    "<CMAKE_${lang}_COMPILER> > <PREPROCESSED_SOURCE> ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO}${_COMPILE_${lang}} <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE>${CMAKE_END_TEMP_FILE}")
+  set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE
+    "<CMAKE_${lang}_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO}${_COMPILE_${lang}} <DEFINES> <INCLUDES> <FLAGS> /FoNUL /FAs /Fa<ASSEMBLY_SOURCE> /c <SOURCE>${CMAKE_END_TEMP_FILE}")
+
+  set(CMAKE_${lang}_USE_RESPONSE_FILE_FOR_OBJECTS 1)
+  set(CMAKE_${lang}_LINK_EXECUTABLE
+    "${_CMAKE_VS_LINK_EXE}<CMAKE_LINKER> ${CMAKE_CL_NOLOGO} <OBJECTS> ${CMAKE_START_TEMP_FILE} /out:<TARGET> /implib:<TARGET_IMPLIB> /pdb:<TARGET_PDB> /version:<TARGET_VERSION_MAJOR>.<TARGET_VERSION_MINOR>${_PLATFORM_LINK_FLAGS} <CMAKE_${lang}_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>${CMAKE_END_TEMP_FILE}")
+
+  if(CMAKE_VS_PLATFORM_TOOLSET MATCHES "v[0-9]+_clang_.*")
+    # note: MSVC 14 2015 Update 1 sets -fno-ms-compatibility by default, but this does not allow one to compile many projects
+    # that include MS's own headers. CMake itself is affected project too.
+    set(CMAKE_${lang}_FLAGS_INIT "${_PLATFORM_DEFINES}${_PLATFORM_DEFINES_${lang}} -fms-extensions -fms-compatibility -D_WINDOWS -Wall${_FLAGS_${lang}}")
+    set(CMAKE_${lang}_FLAGS_DEBUG_INIT "-D_DEBUG /MDd -gline-tables-only -fno-inline -O0 ${_RTC1}")
+    set(CMAKE_${lang}_FLAGS_RELEASE_INIT "/MD -O2 -DNDEBUG")
+    set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "/MD -gline-tables-only -O2 -fno-inline -DNDEBUG")
+    set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "/MD -DNDEBUG") # TODO: Add '-Os' once VS generator maps it properly for Clang
+  else()
+    set(CMAKE_${lang}_FLAGS_INIT "${_PLATFORM_DEFINES}${_PLATFORM_DEFINES_${lang}} /D_WINDOWS /W3${_FLAGS_${lang}}")
+    set(CMAKE_${lang}_FLAGS_DEBUG_INIT "/D_DEBUG /MDd /Zi /Ob0 /Od ${_RTC1}")
+    set(CMAKE_${lang}_FLAGS_RELEASE_INIT "/MD /O2 /Ob2 /DNDEBUG")
+    set(CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "/MD /Zi /O2 /Ob1 /DNDEBUG")
+    set(CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "/MD /O1 /Ob1 /DNDEBUG")
+  endif()
+  set(CMAKE_${lang}_LINKER_SUPPORTS_PDB ON)
+  set(CMAKE_NINJA_DEPTYPE_${lang} msvc)
+
+  if(NOT CMAKE_RC_COMPILER_INIT)
+    set(CMAKE_RC_COMPILER_INIT rc)
+  endif()
+  if(NOT CMAKE_RC_FLAGS_INIT)
+    set(CMAKE_RC_FLAGS_INIT "${_PLATFORM_DEFINES} ${_PLATFORM_DEFINES_${lang}}")
+  endif()
+
+  enable_language(RC)
+  set(CMAKE_NINJA_CMCLDEPS_RC 1)
+endmacro()
diff --git a/share/cmake-3.2/Modules/Platform/Windows-NMcl.cmake b/share/cmake-3.6/Modules/Platform/Windows-NMcl.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows-NMcl.cmake
rename to share/cmake-3.6/Modules/Platform/Windows-NMcl.cmake
diff --git a/share/cmake-3.6/Modules/Platform/Windows-df.cmake b/share/cmake-3.6/Modules/Platform/Windows-df.cmake
new file mode 100644
index 0000000..b31cb11
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Windows-df.cmake
@@ -0,0 +1,63 @@
+# compiler support for fortran CVF compiler on windows
+
+set(CMAKE_WINDOWS_OBJECT_PATH 1)
+set(CMAKE_LIBRARY_PATH_FLAG "-LIBPATH:")
+set(CMAKE_LINK_LIBRARY_FLAG "")
+set(WIN32 1)
+if(CMAKE_VERBOSE_MAKEFILE)
+  set(CMAKE_CL_NOLOGO)
+else()
+  set(CMAKE_CL_NOLOGO "/nologo")
+endif()
+
+set(CMAKE_Fortran_MODDIR_FLAG "-module:")
+
+set(CMAKE_Fortran_CREATE_SHARED_LIBRARY
+ "link ${CMAKE_CL_NOLOGO} ${CMAKE_START_TEMP_FILE}  /out:<TARGET> /dll  <LINK_FLAGS> <OBJECTS> <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
+
+set(CMAKE_Fortran_CREATE_SHARED_MODULE ${CMAKE_Fortran_CREATE_SHARED_LIBRARY})
+
+# create a C++ static library
+set(CMAKE_Fortran_CREATE_STATIC_LIBRARY  "lib ${CMAKE_CL_NOLOGO} <LINK_FLAGS> /out:<TARGET> <OBJECTS> ")
+
+# compile a C++ file into an object file
+set(CMAKE_Fortran_COMPILE_OBJECT
+    "<CMAKE_Fortran_COMPILER>  ${CMAKE_START_TEMP_FILE} ${CMAKE_CL_NOLOGO} /object:<OBJECT> <FLAGS> /compile_only <SOURCE>${CMAKE_END_TEMP_FILE}")
+
+set(CMAKE_Fortran_LINK_EXECUTABLE
+    "<CMAKE_Fortran_COMPILER> ${CMAKE_CL_NOLOGO} ${CMAKE_START_TEMP_FILE} <FLAGS> /exe:<TARGET> <OBJECTS> /link <CMAKE_Fortran_LINK_FLAGS> <LINK_FLAGS> <LINK_LIBRARIES>${CMAKE_END_TEMP_FILE}")
+
+set(CMAKE_CREATE_WIN32_EXE /winapp)
+set(CMAKE_CREATE_CONSOLE_EXE )
+
+if(CMAKE_GENERATOR MATCHES "Visual Studio 7" OR CMAKE_GENERATOR MATCHES "Visual Studio 8")
+  set (CMAKE_NO_BUILD_TYPE 1)
+endif()
+# does the compiler support pdbtype and is it the newer compiler
+
+set(CMAKE_BUILD_TYPE_INIT Debug)
+set (CMAKE_Fortran_FLAGS_INIT "")
+set (CMAKE_Fortran_FLAGS_DEBUG_INIT "/debug:full")
+set (CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "/Optimize:2 /Define:NDEBUG")
+set (CMAKE_Fortran_FLAGS_RELEASE_INIT "/Optimize:1 /Define:NDEBUG")
+set (CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "/Optimize:1 /debug:full /Define:NDEBUG")
+
+set (CMAKE_Fortran_STANDARD_LIBRARIES_INIT "user32.lib")
+
+# executable linker flags
+set (CMAKE_LINK_DEF_FILE_FLAG "/DEF:")
+set (CMAKE_EXE_LINKER_FLAGS_INIT " /INCREMENTAL:YES")
+if (CMAKE_COMPILER_SUPPORTS_PDBTYPE)
+  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug /pdbtype:sept")
+  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug /pdbtype:sept")
+else ()
+  set (CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT "/debug")
+  set (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT "/debug")
+endif ()
+
+set (CMAKE_SHARED_LINKER_FLAGS_INIT ${CMAKE_EXE_LINKER_FLAGS_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT ${CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT})
+set (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_INIT ${CMAKE_SHARED_LINKER_FLAGS_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_DEBUG_INIT ${CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT})
+set (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT})
diff --git a/share/cmake-3.6/Modules/Platform/Windows-wcl386.cmake b/share/cmake-3.6/Modules/Platform/Windows-wcl386.cmake
new file mode 100644
index 0000000..3bc5444
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Windows-wcl386.cmake
@@ -0,0 +1,119 @@
+set(CMAKE_LIBRARY_PATH_FLAG "libpath ")
+set(CMAKE_LINK_LIBRARY_FLAG "library ")
+set(CMAKE_LINK_LIBRARY_FILE_FLAG "library")
+
+if(CMAKE_VERBOSE_MAKEFILE)
+  set(CMAKE_WCL_QUIET)
+  set(CMAKE_WLINK_QUIET)
+  set(CMAKE_LIB_QUIET)
+else()
+  set(CMAKE_WCL_QUIET "-zq")
+  set(CMAKE_WLINK_QUIET "option quiet")
+  set(CMAKE_LIB_QUIET "-q")
+endif()
+
+set(CMAKE_EXE_LINKER_FLAGS_INIT)
+set(CMAKE_CREATE_WIN32_EXE "system nt_win" )
+set(CMAKE_CREATE_CONSOLE_EXE "system nt" )
+set(CMAKE_SHARED_LINKER_FLAGS_INIT "system nt_dll")
+set(CMAKE_MODULE_LINKER_FLAGS_INIT "system nt_dll")
+foreach(type SHARED MODULE EXE)
+  set(CMAKE_${type}_LINKER_FLAGS_DEBUG_INIT "debug all opt map")
+  set(CMAKE_${type}_LINKER_FLAGS_RELWITHDEBINFO_INIT "debug all opt map")
+endforeach()
+
+set(CMAKE_C_COMPILE_OPTIONS_DLL "-bd") # Note: This variable is a ';' separated list
+set(CMAKE_SHARED_LIBRARY_C_FLAGS "-bd") # ... while this is a space separated string.
+
+set(CMAKE_RC_COMPILER "rc" )
+
+set(CMAKE_BUILD_TYPE_INIT Debug)
+
+# single/multi-threaded                 /-bm
+# static/DLL run-time libraries         /-br
+# default is setup for multi-threaded + DLL run-time libraries
+set (CMAKE_C_FLAGS_INIT "-bt=nt -w3 -dWIN32 -br -bm")
+set (CMAKE_CXX_FLAGS_INIT "-bt=nt -xs -w3 -dWIN32 -br -bm")
+foreach(lang C CXX)
+  set (CMAKE_${lang}_FLAGS_DEBUG_INIT "-d2")
+  set (CMAKE_${lang}_FLAGS_MINSIZEREL_INIT "-s -os -d0 -dNDEBUG")
+  set (CMAKE_${lang}_FLAGS_RELEASE_INIT "-s -ot -d0 -dNDEBUG")
+  set (CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT "-s -ot -d1 -dNDEBUG")
+endforeach()
+
+foreach(type CREATE_SHARED_LIBRARY CREATE_SHARED_MODULE LINK_EXECUTABLE)
+  set(CMAKE_C_${type}_USE_WATCOM_QUOTE 1)
+  set(CMAKE_CXX_${type}_USE_WATCOM_QUOTE 1)
+endforeach()
+
+set(CMAKE_C_CREATE_IMPORT_LIBRARY
+  "wlib -c -q -n -b <TARGET_IMPLIB> +<TARGET_QUOTED>")
+set(CMAKE_CXX_CREATE_IMPORT_LIBRARY ${CMAKE_C_CREATE_IMPORT_LIBRARY})
+
+set(CMAKE_C_LINK_EXECUTABLE
+    "wlink ${CMAKE_START_TEMP_FILE} ${CMAKE_WLINK_QUIET} name <TARGET> <LINK_FLAGS> file {<OBJECTS>} <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
+
+
+set(CMAKE_CXX_LINK_EXECUTABLE ${CMAKE_C_LINK_EXECUTABLE})
+
+# compile a C++ file into an object file
+set(CMAKE_CXX_COMPILE_OBJECT
+    "<CMAKE_CXX_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} -d+ <DEFINES> <INCLUDES> <FLAGS> -fo<OBJECT> -c -cc++ <SOURCE>${CMAKE_END_TEMP_FILE}")
+
+# compile a C file into an object file
+set(CMAKE_C_COMPILE_OBJECT
+    "<CMAKE_C_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} -d+ <DEFINES> <INCLUDES> <FLAGS> -fo<OBJECT> -c -cc <SOURCE>${CMAKE_END_TEMP_FILE}")
+
+# preprocess a C source file
+set(CMAKE_C_CREATE_PREPROCESSED_SOURCE
+    "<CMAKE_C_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} -d+ <DEFINES> <INCLUDES> <FLAGS> -fo<PREPROCESSED_SOURCE> -pl -cc <SOURCE>${CMAKE_END_TEMP_FILE}")
+
+# preprocess a C++ source file
+set(CMAKE_CXX_CREATE_PREPROCESSED_SOURCE
+    "<CMAKE_CXX_COMPILER> ${CMAKE_START_TEMP_FILE} ${CMAKE_WCL_QUIET} -d+ <DEFINES> <INCLUDES> <FLAGS> -fo<PREPROCESSED_SOURCE> -pl -cc++ <SOURCE>${CMAKE_END_TEMP_FILE}")
+
+set(CMAKE_CXX_CREATE_SHARED_LIBRARY
+ "wlink ${CMAKE_START_TEMP_FILE} ${CMAKE_WLINK_QUIET} name <TARGET> <LINK_FLAGS> option implib=<TARGET_IMPLIB> file {<OBJECTS>} <LINK_LIBRARIES> ${CMAKE_END_TEMP_FILE}")
+string(REPLACE " option implib=<TARGET_IMPLIB>" ""
+  CMAKE_CXX_CREATE_SHARED_MODULE "${CMAKE_CXX_CREATE_SHARED_LIBRARY}")
+
+# create a C shared library
+set(CMAKE_C_CREATE_SHARED_LIBRARY ${CMAKE_CXX_CREATE_SHARED_LIBRARY})
+
+# create a C shared module
+set(CMAKE_C_CREATE_SHARED_MODULE ${CMAKE_CXX_CREATE_SHARED_MODULE})
+
+# create a C++ static library
+set(CMAKE_CXX_CREATE_STATIC_LIBRARY  "wlib ${CMAKE_LIB_QUIET} -c -n -b <TARGET_QUOTED> <LINK_FLAGS> <OBJECTS> ")
+
+# create a C static library
+set(CMAKE_C_CREATE_STATIC_LIBRARY ${CMAKE_CXX_CREATE_STATIC_LIBRARY})
+
+if(NOT _CMAKE_WATCOM_VERSION)
+  set(_CMAKE_WATCOM_VERSION 1)
+  if(CMAKE_C_COMPILER_VERSION)
+    set(_compiler_version ${CMAKE_C_COMPILER_VERSION})
+    set(_compiler_id ${CMAKE_C_COMPILER_ID})
+  else()
+    set(_compiler_version ${CMAKE_CXX_COMPILER_VERSION})
+    set(_compiler_id ${CMAKE_CXX_COMPILER_ID})
+  endif()
+  set(WATCOM16)
+  set(WATCOM17)
+  set(WATCOM18)
+  set(WATCOM19)
+  if("${_compiler_id}" STREQUAL "OpenWatcom")
+    if("${_compiler_version}" VERSION_LESS 1.7)
+      set(WATCOM16 1)
+    endif()
+    if("${_compiler_version}" VERSION_EQUAL 1.7)
+      set(WATCOM17 1)
+    endif()
+    if("${_compiler_version}" VERSION_EQUAL 1.8)
+      set(WATCOM18 1)
+    endif()
+    if("${_compiler_version}" VERSION_EQUAL 1.9)
+      set(WATCOM19 1)
+    endif()
+  endif()
+endif()
diff --git a/share/cmake-3.6/Modules/Platform/Windows-windres.cmake b/share/cmake-3.6/Modules/Platform/Windows-windres.cmake
new file mode 100644
index 0000000..7d787dd
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/Windows-windres.cmake
@@ -0,0 +1 @@
+set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <FLAGS> <SOURCE> <OBJECT>")
diff --git a/share/cmake-3.2/Modules/Platform/Windows.cmake b/share/cmake-3.6/Modules/Platform/Windows.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Windows.cmake
rename to share/cmake-3.6/Modules/Platform/Windows.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsCE-MSVC-C.cmake b/share/cmake-3.6/Modules/Platform/WindowsCE-MSVC-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsCE-MSVC-C.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsCE-MSVC-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsCE-MSVC-CXX.cmake b/share/cmake-3.6/Modules/Platform/WindowsCE-MSVC-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsCE-MSVC-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsCE-MSVC-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsCE.cmake b/share/cmake-3.6/Modules/Platform/WindowsCE.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsCE.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsCE.cmake
diff --git a/share/cmake-3.6/Modules/Platform/WindowsPaths.cmake b/share/cmake-3.6/Modules/Platform/WindowsPaths.cmake
new file mode 100644
index 0000000..eafa8fa
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/WindowsPaths.cmake
@@ -0,0 +1,102 @@
+
+#=============================================================================
+# Copyright 2006-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Block multiple inclusion because "CMakeCInformation.cmake" includes
+# "Platform/${CMAKE_SYSTEM_NAME}" even though the generic module
+# "CMakeSystemSpecificInformation.cmake" already included it.
+# The extra inclusion is a work-around documented next to the include()
+# call, so this can be removed when the work-around is removed.
+if(__WINDOWS_PATHS_INCLUDED)
+  return()
+endif()
+set(__WINDOWS_PATHS_INCLUDED 1)
+
+# Add the program-files folder(s) to the list of installation
+# prefixes.
+#
+# Windows 64-bit Binary:
+#   ENV{ProgramFiles(x86)} = [C:\Program Files (x86)]
+#   ENV{ProgramFiles} = [C:\Program Files]
+#   ENV{ProgramW6432} = [C:\Program Files] or <not set>
+#
+# Windows 32-bit Binary on 64-bit Windows:
+#   ENV{ProgramFiles(x86)} = [C:\Program Files (x86)]
+#   ENV{ProgramFiles} = [C:\Program Files (x86)]
+#   ENV{ProgramW6432} = [C:\Program Files]
+set(_programfiles "")
+foreach(v "ProgramW6432" "ProgramFiles" "ProgramFiles(x86)")
+  if(DEFINED "ENV{${v}}")
+    file(TO_CMAKE_PATH "$ENV{${v}}" _env_programfiles)
+    list(APPEND _programfiles "${_env_programfiles}")
+    unset(_env_programfiles)
+  endif()
+endforeach()
+if(DEFINED "ENV{SystemDrive}")
+  foreach(d "Program Files" "Program Files (x86)")
+    if(EXISTS "$ENV{SystemDrive}/${d}")
+      list(APPEND _programfiles "$ENV{SystemDrive}/${d}")
+    endif()
+  endforeach()
+endif()
+if(_programfiles)
+  list(REMOVE_DUPLICATES _programfiles)
+  list(APPEND CMAKE_SYSTEM_PREFIX_PATH ${_programfiles})
+endif()
+unset(_programfiles)
+
+# Add the CMake install location.
+get_filename_component(_CMAKE_INSTALL_DIR "${CMAKE_ROOT}" PATH)
+get_filename_component(_CMAKE_INSTALL_DIR "${_CMAKE_INSTALL_DIR}" PATH)
+list(APPEND CMAKE_SYSTEM_PREFIX_PATH "${_CMAKE_INSTALL_DIR}")
+
+if (NOT CMAKE_FIND_NO_INSTALL_PREFIX)
+  # Add other locations.
+  list(APPEND CMAKE_SYSTEM_PREFIX_PATH
+    # Project install destination.
+    "${CMAKE_INSTALL_PREFIX}"
+    )
+  if (CMAKE_STAGING_PREFIX)
+    list(APPEND CMAKE_SYSTEM_PREFIX_PATH
+      # User-supplied staging prefix.
+      "${CMAKE_STAGING_PREFIX}"
+    )
+  endif()
+endif()
+
+if(CMAKE_CROSSCOMPILING AND NOT CMAKE_HOST_SYSTEM_NAME MATCHES "Windows")
+  # MinGW (useful when cross compiling from linux with CMAKE_FIND_ROOT_PATH set)
+  list(APPEND CMAKE_SYSTEM_PREFIX_PATH /)
+endif()
+
+list(APPEND CMAKE_SYSTEM_INCLUDE_PATH
+  )
+
+# mingw can also link against dlls which can also be in /bin, so list this too
+if (NOT CMAKE_FIND_NO_INSTALL_PREFIX)
+  list(APPEND CMAKE_SYSTEM_LIBRARY_PATH
+    "${CMAKE_INSTALL_PREFIX}/bin"
+  )
+  if (CMAKE_STAGING_PREFIX)
+    list(APPEND CMAKE_SYSTEM_LIBRARY_PATH
+      "${CMAKE_STAGING_PREFIX}/bin"
+    )
+  endif()
+endif()
+list(APPEND CMAKE_SYSTEM_LIBRARY_PATH
+  "${_CMAKE_INSTALL_DIR}/bin"
+  /bin
+  )
+
+list(APPEND CMAKE_SYSTEM_PROGRAM_PATH
+  )
diff --git a/share/cmake-3.2/Modules/Platform/WindowsPhone-MSVC-C.cmake b/share/cmake-3.6/Modules/Platform/WindowsPhone-MSVC-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsPhone-MSVC-C.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsPhone-MSVC-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsPhone-MSVC-CXX.cmake b/share/cmake-3.6/Modules/Platform/WindowsPhone-MSVC-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsPhone-MSVC-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsPhone-MSVC-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsPhone.cmake b/share/cmake-3.6/Modules/Platform/WindowsPhone.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsPhone.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsPhone.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsStore-MSVC-C.cmake b/share/cmake-3.6/Modules/Platform/WindowsStore-MSVC-C.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsStore-MSVC-C.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsStore-MSVC-C.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsStore-MSVC-CXX.cmake b/share/cmake-3.6/Modules/Platform/WindowsStore-MSVC-CXX.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsStore-MSVC-CXX.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsStore-MSVC-CXX.cmake
diff --git a/share/cmake-3.2/Modules/Platform/WindowsStore.cmake b/share/cmake-3.6/Modules/Platform/WindowsStore.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/WindowsStore.cmake
rename to share/cmake-3.6/Modules/Platform/WindowsStore.cmake
diff --git a/share/cmake-3.2/Modules/Platform/Xenix.cmake b/share/cmake-3.6/Modules/Platform/Xenix.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/Xenix.cmake
rename to share/cmake-3.6/Modules/Platform/Xenix.cmake
diff --git a/share/cmake-3.2/Modules/Platform/eCos.cmake b/share/cmake-3.6/Modules/Platform/eCos.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/eCos.cmake
rename to share/cmake-3.6/Modules/Platform/eCos.cmake
diff --git a/share/cmake-3.6/Modules/Platform/gas.cmake b/share/cmake-3.6/Modules/Platform/gas.cmake
new file mode 100644
index 0000000..7c659f2
--- /dev/null
+++ b/share/cmake-3.6/Modules/Platform/gas.cmake
@@ -0,0 +1,19 @@
+if(UNIX)
+  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .o)
+else()
+  set(CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION .obj)
+endif()
+
+set(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <INCLUDES> <FLAGS> -o <OBJECT> <SOURCE>")
+
+set(CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY
+      "<CMAKE_AR> cr <TARGET> <LINK_FLAGS> <OBJECTS> "
+      "<CMAKE_RANLIB> <TARGET> ")
+
+set(CMAKE_ASM${ASM_DIALECT}_LINK_EXECUTABLE
+    "<CMAKE_LINKER> <FLAGS> <CMAKE_ASM${ASM_DIALECT}_LINK_FLAGS> <LINK_FLAGS> <OBJECTS>  -o <TARGET> <LINK_LIBRARIES>")
+
+# to be done
+set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_LIBRARY)
+set(CMAKE_ASM${ASM_DIALECT}_CREATE_SHARED_MODULE)
+
diff --git a/share/cmake-3.2/Modules/Platform/kFreeBSD.cmake b/share/cmake-3.6/Modules/Platform/kFreeBSD.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/kFreeBSD.cmake
rename to share/cmake-3.6/Modules/Platform/kFreeBSD.cmake
diff --git a/share/cmake-3.2/Modules/Platform/syllable.cmake b/share/cmake-3.6/Modules/Platform/syllable.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Platform/syllable.cmake
rename to share/cmake-3.6/Modules/Platform/syllable.cmake
diff --git a/share/cmake-3.6/Modules/ProcessorCount.cmake b/share/cmake-3.6/Modules/ProcessorCount.cmake
new file mode 100644
index 0000000..2c5d5ae
--- /dev/null
+++ b/share/cmake-3.6/Modules/ProcessorCount.cmake
@@ -0,0 +1,244 @@
+#.rst:
+# ProcessorCount
+# --------------
+#
+# ProcessorCount(var)
+#
+# Determine the number of processors/cores and save value in ${var}
+#
+# Sets the variable named ${var} to the number of physical cores
+# available on the machine if the information can be determined.
+# Otherwise it is set to 0.  Currently this functionality is implemented
+# for AIX, cygwin, FreeBSD, HPUX, IRIX, Linux, Mac OS X, QNX, Sun and
+# Windows.
+#
+# This function is guaranteed to return a positive integer (>=1) if it
+# succeeds.  It returns 0 if there's a problem determining the processor
+# count.
+#
+# Example use, in a ctest -S dashboard script:
+#
+# ::
+#
+#    include(ProcessorCount)
+#    ProcessorCount(N)
+#    if(NOT N EQUAL 0)
+#      set(CTEST_BUILD_FLAGS -j${N})
+#      set(ctest_test_args ${ctest_test_args} PARALLEL_LEVEL ${N})
+#    endif()
+#
+#
+#
+# This function is intended to offer an approximation of the value of
+# the number of compute cores available on the current machine, such
+# that you may use that value for parallel building and parallel
+# testing.  It is meant to help utilize as much of the machine as seems
+# reasonable.  Of course, knowledge of what else might be running on the
+# machine simultaneously should be used when deciding whether to request
+# a machine's full capacity all for yourself.
+
+# A more reliable way might be to compile a small C program that uses the CPUID
+# instruction, but that again requires compiler support or compiling assembler
+# code.
+
+#=============================================================================
+# Copyright 2010-2011 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+function(ProcessorCount var)
+  # Unknown:
+  set(count 0)
+
+  if(WIN32)
+    # Windows:
+    set(count "$ENV{NUMBER_OF_PROCESSORS}")
+    #message("ProcessorCount: WIN32, trying environment variable")
+  endif()
+
+  if(NOT count)
+    # Mac, FreeBSD, OpenBSD (systems with sysctl):
+    find_program(ProcessorCount_cmd_sysctl sysctl
+      PATHS /usr/sbin /sbin)
+    mark_as_advanced(ProcessorCount_cmd_sysctl)
+    if(ProcessorCount_cmd_sysctl)
+      execute_process(COMMAND ${ProcessorCount_cmd_sysctl} -n hw.ncpu
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE count)
+      #message("ProcessorCount: trying sysctl '${ProcessorCount_cmd_sysctl}'")
+    endif()
+  endif()
+
+  if(NOT count)
+    # Linux (systems with getconf):
+    find_program(ProcessorCount_cmd_getconf getconf)
+    mark_as_advanced(ProcessorCount_cmd_getconf)
+    if(ProcessorCount_cmd_getconf)
+      execute_process(COMMAND ${ProcessorCount_cmd_getconf} _NPROCESSORS_ONLN
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE count)
+      #message("ProcessorCount: trying getconf '${ProcessorCount_cmd_getconf}'")
+    endif()
+  endif()
+
+  if(NOT count)
+    # HPUX (systems with machinfo):
+    find_program(ProcessorCount_cmd_machinfo machinfo
+      PATHS /usr/contrib/bin)
+    mark_as_advanced(ProcessorCount_cmd_machinfo)
+    if(ProcessorCount_cmd_machinfo)
+      execute_process(COMMAND ${ProcessorCount_cmd_machinfo}
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE machinfo_output)
+      string(REGEX MATCHALL "Number of CPUs = ([0-9]+)" procs "${machinfo_output}")
+      set(count "${CMAKE_MATCH_1}")
+      if(NOT count)
+        string(REGEX MATCHALL "([0-9]+) logical processors" procs "${machinfo_output}")
+        set(count "${CMAKE_MATCH_1}")
+      endif()
+      #message("ProcessorCount: trying machinfo '${ProcessorCount_cmd_machinfo}'")
+    else()
+      find_program(ProcessorCount_cmd_mpsched mpsched)
+      mark_as_advanced(ProcessorCount_cmd_mpsched)
+      if(ProcessorCount_cmd_mpsched)
+        execute_process(COMMAND ${ProcessorCount_cmd_mpsched} -s
+          OUTPUT_QUIET
+          ERROR_STRIP_TRAILING_WHITESPACE
+          ERROR_VARIABLE mpsched_output)
+        string(REGEX MATCHALL "Processor Count *: *([0-9]+)" procs "${mpsched_output}")
+        set(count "${CMAKE_MATCH_1}")
+        #message("ProcessorCount: trying mpsched -s '${ProcessorCount_cmd_mpsched}'")
+      endif()
+    endif()
+  endif()
+
+  if(NOT count)
+    # IRIX (systems with hinv):
+    find_program(ProcessorCount_cmd_hinv hinv
+      PATHS /sbin)
+    mark_as_advanced(ProcessorCount_cmd_hinv)
+    if(ProcessorCount_cmd_hinv)
+      execute_process(COMMAND ${ProcessorCount_cmd_hinv}
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE hinv_output)
+      string(REGEX MATCHALL "([0-9]+) .* Processors" procs "${hinv_output}")
+      set(count "${CMAKE_MATCH_1}")
+      #message("ProcessorCount: trying hinv '${ProcessorCount_cmd_hinv}'")
+    endif()
+  endif()
+
+  if(NOT count)
+    # AIX (systems with lsconf):
+    find_program(ProcessorCount_cmd_lsconf lsconf
+      PATHS /usr/sbin)
+    mark_as_advanced(ProcessorCount_cmd_lsconf)
+    if(ProcessorCount_cmd_lsconf)
+      execute_process(COMMAND ${ProcessorCount_cmd_lsconf}
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE lsconf_output)
+      string(REGEX MATCHALL "Number Of Processors: ([0-9]+)" procs "${lsconf_output}")
+      set(count "${CMAKE_MATCH_1}")
+      #message("ProcessorCount: trying lsconf '${ProcessorCount_cmd_lsconf}'")
+    endif()
+  endif()
+
+  if(NOT count)
+    # QNX (systems with pidin):
+    find_program(ProcessorCount_cmd_pidin pidin)
+    mark_as_advanced(ProcessorCount_cmd_pidin)
+    if(ProcessorCount_cmd_pidin)
+      execute_process(COMMAND ${ProcessorCount_cmd_pidin} info
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE pidin_output)
+      string(REGEX MATCHALL "Processor[0-9]+: " procs "${pidin_output}")
+      list(LENGTH procs count)
+      #message("ProcessorCount: trying pidin '${ProcessorCount_cmd_pidin}'")
+    endif()
+  endif()
+
+  if(NOT count)
+    # Sun (systems where psrinfo tool is available)
+    find_program(ProcessorCount_cmd_psrinfo psrinfo PATHS /usr/sbin /sbin)
+    mark_as_advanced(ProcessorCount_cmd_psrinfo)
+    if (ProcessorCount_cmd_psrinfo)
+      execute_process(COMMAND ${ProcessorCount_cmd_psrinfo} -p -v
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE psrinfo_output)
+      string(REGEX MATCH "([0-9]+) virtual processor" procs "${psrinfo_output}")
+      set(count "${CMAKE_MATCH_1}")
+      #message("ProcessorCount: trying psrinfo -p -v '${ProcessorCount_cmd_prvinfo}'")
+    else()
+      # Sun (systems where uname -X emits "NumCPU" in its output):
+      find_program(ProcessorCount_cmd_uname uname)
+      mark_as_advanced(ProcessorCount_cmd_uname)
+      if(ProcessorCount_cmd_uname)
+        execute_process(COMMAND ${ProcessorCount_cmd_uname} -X
+          ERROR_QUIET
+          OUTPUT_STRIP_TRAILING_WHITESPACE
+          OUTPUT_VARIABLE uname_X_output)
+        string(REGEX MATCHALL "NumCPU = ([0-9]+)" procs "${uname_X_output}")
+        set(count "${CMAKE_MATCH_1}")
+        #message("ProcessorCount: trying uname -X '${ProcessorCount_cmd_uname}'")
+      endif()
+    endif()
+  endif()
+
+  # Execute this code when all previously attempted methods return empty
+  # output:
+  #
+  if(NOT count)
+    # Systems with /proc/cpuinfo:
+    set(cpuinfo_file /proc/cpuinfo)
+    if(EXISTS "${cpuinfo_file}")
+      file(STRINGS "${cpuinfo_file}" procs REGEX "^processor.: [0-9]+$")
+      list(LENGTH procs count)
+      #message("ProcessorCount: trying cpuinfo '${cpuinfo_file}'")
+    endif()
+  endif()
+
+  if(NOT count)
+    # Haiku
+    find_program(ProcessorCount_cmd_sysinfo sysinfo)
+    if(ProcessorCount_cmd_sysinfo)
+      execute_process(COMMAND ${ProcessorCount_cmd_sysinfo}
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        OUTPUT_VARIABLE sysinfo_X_output)
+      string(REGEX MATCHALL "\nCPU #[0-9]+:" procs "\n${sysinfo_X_output}")
+      list(LENGTH procs count)
+      #message("ProcessorCount: trying sysinfo '${ProcessorCount_cmd_sysinfo}'")
+    endif()
+  endif()
+
+  # Since cygwin builds of CMake do not define WIN32 anymore, but they still
+  # run on Windows, and will still have this env var defined:
+  #
+  if(NOT count)
+    set(count "$ENV{NUMBER_OF_PROCESSORS}")
+    #message("ProcessorCount: last fallback, trying environment variable")
+  endif()
+
+  # Ensure an integer return (avoid inadvertently returning an empty string
+  # or an error string)... If it's not a decimal integer, return 0:
+  #
+  if(NOT count MATCHES "^[0-9]+$")
+    set(count 0)
+  endif()
+
+  set(${var} ${count} PARENT_SCOPE)
+endfunction()
diff --git a/share/cmake-3.2/Modules/Qt4ConfigDependentSettings.cmake b/share/cmake-3.6/Modules/Qt4ConfigDependentSettings.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Qt4ConfigDependentSettings.cmake
rename to share/cmake-3.6/Modules/Qt4ConfigDependentSettings.cmake
diff --git a/share/cmake-3.6/Modules/Qt4Macros.cmake b/share/cmake-3.6/Modules/Qt4Macros.cmake
new file mode 100644
index 0000000..3b0a6cc
--- /dev/null
+++ b/share/cmake-3.6/Modules/Qt4Macros.cmake
@@ -0,0 +1,515 @@
+#.rst:
+# Qt4Macros
+# ---------
+#
+#
+#
+# This file is included by FindQt4.cmake, don't include it directly.
+
+#=============================================================================
+# Copyright 2005-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+
+######################################
+#
+#       Macros for building Qt files
+#
+######################################
+
+
+macro (QT4_EXTRACT_OPTIONS _qt4_files _qt4_options _qt4_target)
+  set(${_qt4_files})
+  set(${_qt4_options})
+  set(_QT4_DOING_OPTIONS FALSE)
+  set(_QT4_DOING_TARGET FALSE)
+  foreach(_currentArg ${ARGN})
+    if ("x${_currentArg}" STREQUAL "xOPTIONS")
+      set(_QT4_DOING_OPTIONS TRUE)
+    elseif ("x${_currentArg}" STREQUAL "xTARGET")
+      set(_QT4_DOING_TARGET TRUE)
+    else ()
+      if(_QT4_DOING_TARGET)
+        set(${_qt4_target} "${_currentArg}")
+      elseif(_QT4_DOING_OPTIONS)
+        list(APPEND ${_qt4_options} "${_currentArg}")
+      else()
+        list(APPEND ${_qt4_files} "${_currentArg}")
+      endif()
+    endif ()
+  endforeach()
+endmacro ()
+
+
+# macro used to create the names of output files preserving relative dirs
+macro (QT4_MAKE_OUTPUT_FILE infile prefix ext outfile )
+  string(LENGTH ${CMAKE_CURRENT_BINARY_DIR} _binlength)
+  string(LENGTH ${infile} _infileLength)
+  set(_checkinfile ${CMAKE_CURRENT_SOURCE_DIR})
+  if(_infileLength GREATER _binlength)
+    string(SUBSTRING "${infile}" 0 ${_binlength} _checkinfile)
+    if(_checkinfile STREQUAL "${CMAKE_CURRENT_BINARY_DIR}")
+      file(RELATIVE_PATH rel ${CMAKE_CURRENT_BINARY_DIR} ${infile})
+    else()
+      file(RELATIVE_PATH rel ${CMAKE_CURRENT_SOURCE_DIR} ${infile})
+    endif()
+  else()
+    file(RELATIVE_PATH rel ${CMAKE_CURRENT_SOURCE_DIR} ${infile})
+  endif()
+  if(WIN32 AND rel MATCHES "^([a-zA-Z]):(.*)$") # absolute path
+    set(rel "${CMAKE_MATCH_1}_${CMAKE_MATCH_2}")
+  endif()
+  set(_outfile "${CMAKE_CURRENT_BINARY_DIR}/${rel}")
+  string(REPLACE ".." "__" _outfile ${_outfile})
+  get_filename_component(outpath ${_outfile} PATH)
+  get_filename_component(_outfile ${_outfile} NAME_WE)
+  file(MAKE_DIRECTORY ${outpath})
+  set(${outfile} ${outpath}/${prefix}${_outfile}.${ext})
+endmacro ()
+
+
+macro (QT4_GET_MOC_FLAGS _moc_flags)
+  set(${_moc_flags})
+  get_directory_property(_inc_DIRS INCLUDE_DIRECTORIES)
+
+  foreach(_current ${_inc_DIRS})
+    if("${_current}" MATCHES "\\.framework/?$")
+      string(REGEX REPLACE "/[^/]+\\.framework" "" framework_path "${_current}")
+      set(${_moc_flags} ${${_moc_flags}} "-F${framework_path}")
+    else()
+      set(${_moc_flags} ${${_moc_flags}} "-I${_current}")
+    endif()
+  endforeach()
+
+  get_directory_property(_defines COMPILE_DEFINITIONS)
+  foreach(_current ${_defines})
+    set(${_moc_flags} ${${_moc_flags}} "-D${_current}")
+  endforeach()
+
+  if(Q_WS_WIN)
+    set(${_moc_flags} ${${_moc_flags}} -DWIN32)
+  endif()
+
+endmacro()
+
+
+# helper macro to set up a moc rule
+function (QT4_CREATE_MOC_COMMAND infile outfile moc_flags moc_options moc_target)
+  # For Windows, create a parameters file to work around command line length limit
+  # Pass the parameters in a file.  Set the working directory to
+  # be that containing the parameters file and reference it by
+  # just the file name.  This is necessary because the moc tool on
+  # MinGW builds does not seem to handle spaces in the path to the
+  # file given with the @ syntax.
+  get_filename_component(_moc_outfile_name "${outfile}" NAME)
+  get_filename_component(_moc_outfile_dir "${outfile}" PATH)
+  if(_moc_outfile_dir)
+    set(_moc_working_dir WORKING_DIRECTORY ${_moc_outfile_dir})
+  endif()
+  set (_moc_parameters_file ${outfile}_parameters)
+  set (_moc_parameters ${moc_flags} ${moc_options} -o "${outfile}" "${infile}")
+  string (REPLACE ";" "\n" _moc_parameters "${_moc_parameters}")
+
+  if(moc_target)
+    set (_moc_parameters_file ${_moc_parameters_file}$<$<BOOL:$<CONFIGURATION>>:_$<CONFIGURATION>>)
+    set(targetincludes "$<TARGET_PROPERTY:${moc_target},INCLUDE_DIRECTORIES>")
+    set(targetdefines "$<TARGET_PROPERTY:${moc_target},COMPILE_DEFINITIONS>")
+
+    set(targetincludes "$<$<BOOL:${targetincludes}>:-I$<JOIN:${targetincludes},\n-I>\n>")
+    set(targetdefines "$<$<BOOL:${targetdefines}>:-D$<JOIN:${targetdefines},\n-D>\n>")
+
+    file (GENERATE
+      OUTPUT ${_moc_parameters_file}
+      CONTENT "${targetdefines}${targetincludes}${_moc_parameters}\n"
+    )
+
+    set(targetincludes)
+    set(targetdefines)
+  else()
+    set(CMAKE_CONFIGURABLE_FILE_CONTENT "${_moc_parameters}")
+    configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
+                   "${_moc_parameters_file}" @ONLY)
+  endif()
+
+  set(_moc_extra_parameters_file @${_moc_parameters_file})
+  add_custom_command(OUTPUT ${outfile}
+                      COMMAND Qt4::moc ${_moc_extra_parameters_file}
+                      DEPENDS ${infile} ${_moc_parameters_file}
+                      ${_moc_working_dir}
+                      VERBATIM)
+endfunction ()
+
+
+macro (QT4_GENERATE_MOC infile outfile )
+# get include dirs and flags
+   QT4_GET_MOC_FLAGS(moc_flags)
+   get_filename_component(abs_infile ${infile} ABSOLUTE)
+   set(_outfile "${outfile}")
+   if(NOT IS_ABSOLUTE "${outfile}")
+     set(_outfile "${CMAKE_CURRENT_BINARY_DIR}/${outfile}")
+   endif()
+
+   if (${ARGC} GREATER 3 AND "x${ARGV2}" STREQUAL "xTARGET")
+      set(moc_target ${ARGV3})
+   endif()
+   QT4_CREATE_MOC_COMMAND(${abs_infile} ${_outfile} "${moc_flags}" "" "${moc_target}")
+   set_source_files_properties(${outfile} PROPERTIES SKIP_AUTOMOC TRUE)  # dont run automoc on this file
+endmacro ()
+
+
+# QT4_WRAP_CPP(outfiles inputfile ... )
+
+macro (QT4_WRAP_CPP outfiles )
+  # get include dirs
+  QT4_GET_MOC_FLAGS(moc_flags)
+  QT4_EXTRACT_OPTIONS(moc_files moc_options moc_target ${ARGN})
+
+  foreach (it ${moc_files})
+    get_filename_component(it ${it} ABSOLUTE)
+    QT4_MAKE_OUTPUT_FILE(${it} moc_ cxx outfile)
+    QT4_CREATE_MOC_COMMAND(${it} ${outfile} "${moc_flags}" "${moc_options}" "${moc_target}")
+    set(${outfiles} ${${outfiles}} ${outfile})
+  endforeach()
+
+endmacro ()
+
+
+# QT4_WRAP_UI(outfiles inputfile ... )
+
+macro (QT4_WRAP_UI outfiles )
+  QT4_EXTRACT_OPTIONS(ui_files ui_options ui_target ${ARGN})
+
+  foreach (it ${ui_files})
+    get_filename_component(outfile ${it} NAME_WE)
+    get_filename_component(infile ${it} ABSOLUTE)
+    set(outfile ${CMAKE_CURRENT_BINARY_DIR}/ui_${outfile}.h)
+    add_custom_command(OUTPUT ${outfile}
+      COMMAND Qt4::uic
+      ARGS ${ui_options} -o ${outfile} ${infile}
+      MAIN_DEPENDENCY ${infile} VERBATIM)
+    set(${outfiles} ${${outfiles}} ${outfile})
+  endforeach ()
+
+endmacro ()
+
+
+# QT4_ADD_RESOURCES(outfiles inputfile ... )
+
+macro (QT4_ADD_RESOURCES outfiles )
+  QT4_EXTRACT_OPTIONS(rcc_files rcc_options rcc_target ${ARGN})
+
+  foreach (it ${rcc_files})
+    get_filename_component(outfilename ${it} NAME_WE)
+    get_filename_component(infile ${it} ABSOLUTE)
+    get_filename_component(rc_path ${infile} PATH)
+    set(outfile ${CMAKE_CURRENT_BINARY_DIR}/qrc_${outfilename}.cxx)
+
+    set(_RC_DEPENDS)
+    if(EXISTS "${infile}")
+      #  parse file for dependencies
+      #  all files are absolute paths or relative to the location of the qrc file
+      file(READ "${infile}" _RC_FILE_CONTENTS)
+      string(REGEX MATCHALL "<file[^<]+" _RC_FILES "${_RC_FILE_CONTENTS}")
+      foreach(_RC_FILE ${_RC_FILES})
+        string(REGEX REPLACE "^<file[^>]*>" "" _RC_FILE "${_RC_FILE}")
+        if(NOT IS_ABSOLUTE "${_RC_FILE}")
+          set(_RC_FILE "${rc_path}/${_RC_FILE}")
+        endif()
+        set(_RC_DEPENDS ${_RC_DEPENDS} "${_RC_FILE}")
+      endforeach()
+      unset(_RC_FILES)
+      unset(_RC_FILE_CONTENTS)
+      # Since this cmake macro is doing the dependency scanning for these files,
+      # let's make a configured file and add it as a dependency so cmake is run
+      # again when dependencies need to be recomputed.
+      QT4_MAKE_OUTPUT_FILE("${infile}" "" "qrc.depends" out_depends)
+      configure_file("${infile}" "${out_depends}" COPYONLY)
+    else()
+      # The .qrc file does not exist (yet). Let's add a dependency and hope
+      # that it will be generated later
+      set(out_depends)
+    endif()
+
+    add_custom_command(OUTPUT ${outfile}
+      COMMAND Qt4::rcc
+      ARGS ${rcc_options} -name ${outfilename} -o ${outfile} ${infile}
+      MAIN_DEPENDENCY ${infile}
+      DEPENDS ${_RC_DEPENDS} "${out_depends}" VERBATIM)
+    set(${outfiles} ${${outfiles}} ${outfile})
+  endforeach ()
+
+endmacro ()
+
+
+macro(QT4_ADD_DBUS_INTERFACE _sources _interface _basename)
+  get_filename_component(_infile ${_interface} ABSOLUTE)
+  set(_header "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.h")
+  set(_impl   "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.cpp")
+  set(_moc    "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.moc")
+
+  get_source_file_property(_nonamespace ${_interface} NO_NAMESPACE)
+  if(_nonamespace)
+    set(_params -N -m)
+  else()
+    set(_params -m)
+  endif()
+
+  get_source_file_property(_classname ${_interface} CLASSNAME)
+  if(_classname)
+    set(_params ${_params} -c ${_classname})
+  endif()
+
+  get_source_file_property(_include ${_interface} INCLUDE)
+  if(_include)
+    set(_params ${_params} -i ${_include})
+  endif()
+
+  add_custom_command(OUTPUT "${_impl}" "${_header}"
+      COMMAND Qt4::qdbusxml2cpp ${_params} -p ${_basename} ${_infile}
+      DEPENDS ${_infile} VERBATIM)
+
+  set_source_files_properties("${_impl}" PROPERTIES SKIP_AUTOMOC TRUE)
+
+  QT4_GENERATE_MOC("${_header}" "${_moc}")
+
+  list(APPEND ${_sources} "${_impl}" "${_header}" "${_moc}")
+  MACRO_ADD_FILE_DEPENDENCIES("${_impl}" "${_moc}")
+
+endmacro()
+
+
+macro(QT4_ADD_DBUS_INTERFACES _sources)
+  foreach (_current_FILE ${ARGN})
+    get_filename_component(_infile ${_current_FILE} ABSOLUTE)
+    get_filename_component(_basename ${_current_FILE} NAME)
+    # get the part before the ".xml" suffix
+    string(TOLOWER ${_basename} _basename)
+    string(REGEX REPLACE "(.*\\.)?([^\\.]+)\\.xml" "\\2" _basename ${_basename})
+    QT4_ADD_DBUS_INTERFACE(${_sources} ${_infile} ${_basename}interface)
+  endforeach ()
+endmacro()
+
+
+macro(QT4_GENERATE_DBUS_INTERFACE _header) # _customName OPTIONS -some -options )
+  QT4_EXTRACT_OPTIONS(_customName _qt4_dbus_options _qt4_dbus_target ${ARGN})
+
+  get_filename_component(_in_file ${_header} ABSOLUTE)
+  get_filename_component(_basename ${_header} NAME_WE)
+
+  if (_customName)
+    if (IS_ABSOLUTE ${_customName})
+      get_filename_component(_containingDir ${_customName} PATH)
+      if (NOT EXISTS ${_containingDir})
+        file(MAKE_DIRECTORY "${_containingDir}")
+      endif()
+      set(_target ${_customName})
+    else()
+      set(_target ${CMAKE_CURRENT_BINARY_DIR}/${_customName})
+    endif()
+  else ()
+    set(_target ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.xml)
+  endif ()
+
+  add_custom_command(OUTPUT ${_target}
+      COMMAND Qt4::qdbuscpp2xml ${_qt4_dbus_options} ${_in_file} -o ${_target}
+      DEPENDS ${_in_file} VERBATIM
+  )
+endmacro()
+
+
+macro(QT4_ADD_DBUS_ADAPTOR _sources _xml_file _include _parentClass) # _optionalBasename _optionalClassName)
+  get_filename_component(_infile ${_xml_file} ABSOLUTE)
+
+  unset(_optionalBasename)
+  if(${ARGC} GREATER 4)
+    set(_optionalBasename "${ARGV4}")
+  endif()
+  if (_optionalBasename)
+    set(_basename ${_optionalBasename} )
+  else ()
+    string(REGEX REPLACE "(.*[/\\.])?([^\\.]+)\\.xml" "\\2adaptor" _basename ${_infile})
+    string(TOLOWER ${_basename} _basename)
+  endif ()
+
+  unset(_optionalClassName)
+  if(${ARGC} GREATER 5)
+    set(_optionalClassName "${ARGV5}")
+  endif()
+  set(_header "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.h")
+  set(_impl   "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.cpp")
+  set(_moc    "${CMAKE_CURRENT_BINARY_DIR}/${_basename}.moc")
+
+  if(_optionalClassName)
+    add_custom_command(OUTPUT "${_impl}" "${_header}"
+       COMMAND Qt4::qdbusxml2cpp -m -a ${_basename} -c ${_optionalClassName} -i ${_include} -l ${_parentClass} ${_infile}
+       DEPENDS ${_infile} VERBATIM
+    )
+  else()
+    add_custom_command(OUTPUT "${_impl}" "${_header}"
+       COMMAND Qt4::qdbusxml2cpp -m -a ${_basename} -i ${_include} -l ${_parentClass} ${_infile}
+       DEPENDS ${_infile} VERBATIM
+     )
+  endif()
+
+  QT4_GENERATE_MOC("${_header}" "${_moc}")
+  set_source_files_properties("${_impl}" PROPERTIES SKIP_AUTOMOC TRUE)
+  MACRO_ADD_FILE_DEPENDENCIES("${_impl}" "${_moc}")
+
+  list(APPEND ${_sources} "${_impl}" "${_header}" "${_moc}")
+endmacro()
+
+
+macro(QT4_AUTOMOC)
+  if(NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.11)
+    message(DEPRECATION "The qt4_automoc macro is obsolete. Use the CMAKE_AUTOMOC feature instead.")
+  endif()
+  QT4_GET_MOC_FLAGS(_moc_INCS)
+
+  set(_matching_FILES )
+  foreach (_current_FILE ${ARGN})
+
+    get_filename_component(_abs_FILE ${_current_FILE} ABSOLUTE)
+    # if "SKIP_AUTOMOC" is set to true, we will not handle this file here.
+    # This is required to make uic work correctly:
+    # we need to add generated .cpp files to the sources (to compile them),
+    # but we cannot let automoc handle them, as the .cpp files don't exist yet when
+    # cmake is run for the very first time on them -> however the .cpp files might
+    # exist at a later run. at that time we need to skip them, so that we don't add two
+    # different rules for the same moc file
+    get_source_file_property(_skip ${_abs_FILE} SKIP_AUTOMOC)
+
+    if ( NOT _skip AND EXISTS ${_abs_FILE} )
+
+      file(READ ${_abs_FILE} _contents)
+
+      get_filename_component(_abs_PATH ${_abs_FILE} PATH)
+
+      string(REGEX MATCHALL "# *include +[^ ]+\\.moc[\">]" _match "${_contents}")
+      if(_match)
+        foreach (_current_MOC_INC ${_match})
+          string(REGEX MATCH "[^ <\"]+\\.moc" _current_MOC "${_current_MOC_INC}")
+
+          get_filename_component(_basename ${_current_MOC} NAME_WE)
+          if(EXISTS ${_abs_PATH}/${_basename}.hpp)
+            set(_header ${_abs_PATH}/${_basename}.hpp)
+          else()
+            set(_header ${_abs_PATH}/${_basename}.h)
+          endif()
+          set(_moc    ${CMAKE_CURRENT_BINARY_DIR}/${_current_MOC})
+          QT4_CREATE_MOC_COMMAND(${_header} ${_moc} "${_moc_INCS}" "" "")
+          MACRO_ADD_FILE_DEPENDENCIES(${_abs_FILE} ${_moc})
+        endforeach ()
+      endif()
+    endif ()
+  endforeach ()
+endmacro()
+
+
+macro(QT4_CREATE_TRANSLATION _qm_files)
+   QT4_EXTRACT_OPTIONS(_lupdate_files _lupdate_options _lupdate_target ${ARGN})
+   set(_my_sources)
+   set(_my_dirs)
+   set(_my_tsfiles)
+   set(_ts_pro)
+   foreach (_file ${_lupdate_files})
+     get_filename_component(_ext ${_file} EXT)
+     get_filename_component(_abs_FILE ${_file} ABSOLUTE)
+     if(_ext MATCHES "ts")
+       list(APPEND _my_tsfiles ${_abs_FILE})
+     else()
+       if(NOT _ext)
+         list(APPEND _my_dirs ${_abs_FILE})
+       else()
+         list(APPEND _my_sources ${_abs_FILE})
+       endif()
+     endif()
+   endforeach()
+   foreach(_ts_file ${_my_tsfiles})
+     if(_my_sources)
+       # make a .pro file to call lupdate on, so we don't make our commands too
+       # long for some systems
+       get_filename_component(_ts_name ${_ts_file} NAME_WE)
+       set(_ts_pro ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/${_ts_name}_lupdate.pro)
+       set(_pro_srcs)
+       foreach(_pro_src ${_my_sources})
+         set(_pro_srcs "${_pro_srcs} \\\n  \"${_pro_src}\"")
+       endforeach()
+       set(_pro_includes)
+       get_directory_property(_inc_DIRS INCLUDE_DIRECTORIES)
+       list(REMOVE_DUPLICATES _inc_DIRS)
+       foreach(_pro_include ${_inc_DIRS})
+         get_filename_component(_abs_include "${_pro_include}" ABSOLUTE)
+         set(_pro_includes "${_pro_includes} \\\n  \"${_abs_include}\"")
+       endforeach()
+       file(WRITE ${_ts_pro} "SOURCES =${_pro_srcs}\nINCLUDEPATH =${_pro_includes}\n")
+     endif()
+     add_custom_command(OUTPUT ${_ts_file}
+        COMMAND Qt4::lupdate
+        ARGS ${_lupdate_options} ${_ts_pro} ${_my_dirs} -ts ${_ts_file}
+        DEPENDS ${_my_sources} ${_ts_pro} VERBATIM)
+   endforeach()
+   QT4_ADD_TRANSLATION(${_qm_files} ${_my_tsfiles})
+endmacro()
+
+
+macro(QT4_ADD_TRANSLATION _qm_files)
+  foreach (_current_FILE ${ARGN})
+    get_filename_component(_abs_FILE ${_current_FILE} ABSOLUTE)
+    get_filename_component(qm ${_abs_FILE} NAME_WE)
+    get_source_file_property(output_location ${_abs_FILE} OUTPUT_LOCATION)
+    if(output_location)
+      file(MAKE_DIRECTORY "${output_location}")
+      set(qm "${output_location}/${qm}.qm")
+    else()
+      set(qm "${CMAKE_CURRENT_BINARY_DIR}/${qm}.qm")
+    endif()
+
+    add_custom_command(OUTPUT ${qm}
+       COMMAND Qt4::lrelease
+       ARGS ${_abs_FILE} -qm ${qm}
+       DEPENDS ${_abs_FILE} VERBATIM
+    )
+    set(${_qm_files} ${${_qm_files}} ${qm})
+  endforeach ()
+endmacro()
+
+function(qt4_use_modules _target _link_type)
+  if(NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.11)
+    message(DEPRECATION "The qt4_use_modules function is obsolete. Use target_link_libraries with IMPORTED targets instead.")
+  endif()
+  if ("${_link_type}" STREQUAL "LINK_PUBLIC" OR "${_link_type}" STREQUAL "LINK_PRIVATE")
+    set(modules ${ARGN})
+    set(link_type ${_link_type})
+  else()
+    set(modules ${_link_type} ${ARGN})
+  endif()
+  foreach(_module ${modules})
+    string(TOUPPER ${_module} _ucmodule)
+    set(_targetPrefix QT_QT${_ucmodule})
+    if (_ucmodule STREQUAL QAXCONTAINER OR _ucmodule STREQUAL QAXSERVER)
+      if (NOT QT_Q${_ucmodule}_FOUND)
+        message(FATAL_ERROR "Can not use \"${_module}\" module which has not yet been found.")
+      endif()
+      set(_targetPrefix QT_Q${_ucmodule})
+    else()
+      if (NOT QT_QT${_ucmodule}_FOUND)
+        message(FATAL_ERROR "Can not use \"${_module}\" module which has not yet been found.")
+      endif()
+      if ("${_ucmodule}" STREQUAL "MAIN")
+        message(FATAL_ERROR "Can not use \"${_module}\" module with qt4_use_modules.")
+      endif()
+    endif()
+    target_link_libraries(${_target} ${link_type} ${${_targetPrefix}_LIBRARIES})
+    set_property(TARGET ${_target} APPEND PROPERTY INCLUDE_DIRECTORIES ${${_targetPrefix}_INCLUDE_DIR} ${QT_HEADERS_DIR} ${QT_MKSPECS_DIR}/default)
+    set_property(TARGET ${_target} APPEND PROPERTY COMPILE_DEFINITIONS ${${_targetPrefix}_COMPILE_DEFINITIONS})
+  endforeach()
+endfunction()
diff --git a/share/cmake-3.2/Modules/RepositoryInfo.txt.in b/share/cmake-3.6/Modules/RepositoryInfo.txt.in
similarity index 100%
rename from share/cmake-3.2/Modules/RepositoryInfo.txt.in
rename to share/cmake-3.6/Modules/RepositoryInfo.txt.in
diff --git a/share/cmake-3.2/Modules/SelectLibraryConfigurations.cmake b/share/cmake-3.6/Modules/SelectLibraryConfigurations.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/SelectLibraryConfigurations.cmake
rename to share/cmake-3.6/Modules/SelectLibraryConfigurations.cmake
diff --git a/share/cmake-3.2/Modules/Squish4RunTestCase.bat b/share/cmake-3.6/Modules/Squish4RunTestCase.bat
similarity index 100%
rename from share/cmake-3.2/Modules/Squish4RunTestCase.bat
rename to share/cmake-3.6/Modules/Squish4RunTestCase.bat
diff --git a/share/cmake-3.6/Modules/Squish4RunTestCase.sh b/share/cmake-3.6/Modules/Squish4RunTestCase.sh
new file mode 100755
index 0000000..39a3907
--- /dev/null
+++ b/share/cmake-3.6/Modules/Squish4RunTestCase.sh
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+SQUISHSERVER=$1
+SQUISHRUNNER=$2
+TESTSUITE=$3
+TESTCASE=$4
+AUT=$5
+AUTDIR=$6
+SETTINGSGROUP=$7
+
+$SQUISHSERVER --stop > /dev/null 2>&1
+
+echo "Adding AUT... $SQUISHSERVER --settingsGroup $SETTINGSGROUP --config addAUT $AUT $AUTDIR"
+$SQUISHSERVER --settingsGroup "$SETTINGSGROUP" --config addAUT "$AUT" "$AUTDIR" || exit 255
+# sleep 1
+
+echo "Starting the squish server... $SQUISHSERVER --daemon"
+$SQUISHSERVER --daemon || exit 255
+# sleep 2
+
+echo "Running the test case...$SQUISHRUNNER --settingsGroup $SETTINGSGROUP --testsuite $TESTSUITE --testcase $TESTCASE"
+$SQUISHRUNNER --settingsGroup "$SETTINGSGROUP" --testsuite "$TESTSUITE" --testcase "$TESTCASE"
+returnValue=$?
+
+echo "Stopping the squish server... $SQUISHSERVER --stop"
+$SQUISHSERVER --stop
+
+exit $returnValue
diff --git a/share/cmake-3.2/Modules/SquishRunTestCase.bat b/share/cmake-3.6/Modules/SquishRunTestCase.bat
similarity index 100%
rename from share/cmake-3.2/Modules/SquishRunTestCase.bat
rename to share/cmake-3.6/Modules/SquishRunTestCase.bat
diff --git a/share/cmake-3.2/Modules/SquishRunTestCase.sh b/share/cmake-3.6/Modules/SquishRunTestCase.sh
similarity index 100%
rename from share/cmake-3.2/Modules/SquishRunTestCase.sh
rename to share/cmake-3.6/Modules/SquishRunTestCase.sh
diff --git a/share/cmake-3.2/Modules/SquishTestScript.cmake b/share/cmake-3.6/Modules/SquishTestScript.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/SquishTestScript.cmake
rename to share/cmake-3.6/Modules/SquishTestScript.cmake
diff --git a/share/cmake-3.2/Modules/SystemInformation.cmake b/share/cmake-3.6/Modules/SystemInformation.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/SystemInformation.cmake
rename to share/cmake-3.6/Modules/SystemInformation.cmake
diff --git a/share/cmake-3.2/Modules/SystemInformation.in b/share/cmake-3.6/Modules/SystemInformation.in
similarity index 100%
rename from share/cmake-3.2/Modules/SystemInformation.in
rename to share/cmake-3.6/Modules/SystemInformation.in
diff --git a/share/cmake-3.6/Modules/TestBigEndian.cmake b/share/cmake-3.6/Modules/TestBigEndian.cmake
new file mode 100644
index 0000000..fdc3adb
--- /dev/null
+++ b/share/cmake-3.6/Modules/TestBigEndian.cmake
@@ -0,0 +1,119 @@
+#.rst:
+# TestBigEndian
+# -------------
+#
+# Define macro to determine endian type
+#
+# Check if the system is big endian or little endian
+#
+# ::
+#
+#   TEST_BIG_ENDIAN(VARIABLE)
+#   VARIABLE - variable to store the result to
+
+#=============================================================================
+# Copyright 2002-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+macro(TEST_BIG_ENDIAN VARIABLE)
+  if(NOT DEFINED HAVE_${VARIABLE})
+    message(STATUS "Check if the system is big endian")
+    message(STATUS "Searching 16 bit integer")
+
+    include(CheckTypeSize)
+
+    CHECK_TYPE_SIZE("unsigned short" CMAKE_SIZEOF_UNSIGNED_SHORT)
+    if(CMAKE_SIZEOF_UNSIGNED_SHORT EQUAL 2)
+      message(STATUS "Using unsigned short")
+      set(CMAKE_16BIT_TYPE "unsigned short")
+    else()
+      CHECK_TYPE_SIZE("unsigned int"   CMAKE_SIZEOF_UNSIGNED_INT)
+      if(CMAKE_SIZEOF_UNSIGNED_INT)
+        message(STATUS "Using unsigned int")
+        set(CMAKE_16BIT_TYPE "unsigned int")
+
+      else()
+
+        CHECK_TYPE_SIZE("unsigned long"  CMAKE_SIZEOF_UNSIGNED_LONG)
+        if(CMAKE_SIZEOF_UNSIGNED_LONG)
+          message(STATUS "Using unsigned long")
+          set(CMAKE_16BIT_TYPE "unsigned long")
+        else()
+          message(FATAL_ERROR "no suitable type found")
+        endif()
+
+      endif()
+
+    endif()
+
+
+    configure_file("${CMAKE_ROOT}/Modules/TestEndianess.c.in"
+                   "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c"
+                   @ONLY)
+
+     file(READ "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c"
+          TEST_ENDIANESS_FILE_CONTENT)
+
+     try_compile(HAVE_${VARIABLE}
+      "${CMAKE_BINARY_DIR}"
+      "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c"
+      OUTPUT_VARIABLE OUTPUT
+      COPY_FILE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/TestEndianess.bin" )
+
+      if(HAVE_${VARIABLE})
+
+        file(STRINGS "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/TestEndianess.bin"
+            CMAKE_TEST_ENDIANESS_STRINGS_LE LIMIT_COUNT 1 REGEX "THIS IS LITTLE ENDIAN")
+
+        file(STRINGS "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/TestEndianess.bin"
+            CMAKE_TEST_ENDIANESS_STRINGS_BE LIMIT_COUNT 1 REGEX "THIS IS BIG ENDIAN")
+
+        # on mac, if there are universal binaries built both will be true
+        # return the result depending on the machine on which cmake runs
+        if(CMAKE_TEST_ENDIANESS_STRINGS_BE  AND  CMAKE_TEST_ENDIANESS_STRINGS_LE)
+          if(CMAKE_SYSTEM_PROCESSOR MATCHES powerpc)
+            set(CMAKE_TEST_ENDIANESS_STRINGS_BE TRUE)
+            set(CMAKE_TEST_ENDIANESS_STRINGS_LE FALSE)
+          else()
+            set(CMAKE_TEST_ENDIANESS_STRINGS_BE FALSE)
+            set(CMAKE_TEST_ENDIANESS_STRINGS_LE TRUE)
+          endif()
+          message(STATUS "TEST_BIG_ENDIAN found different results, consider setting CMAKE_OSX_ARCHITECTURES or CMAKE_TRY_COMPILE_OSX_ARCHITECTURES to one or no architecture !")
+        endif()
+
+        if(CMAKE_TEST_ENDIANESS_STRINGS_LE)
+          set(${VARIABLE} 0 CACHE INTERNAL "Result of TEST_BIG_ENDIAN" FORCE)
+          message(STATUS "Check if the system is big endian - little endian")
+        endif()
+
+        if(CMAKE_TEST_ENDIANESS_STRINGS_BE)
+          set(${VARIABLE} 1 CACHE INTERNAL "Result of TEST_BIG_ENDIAN" FORCE)
+          message(STATUS "Check if the system is big endian - big endian")
+        endif()
+
+        if(NOT CMAKE_TEST_ENDIANESS_STRINGS_BE  AND  NOT CMAKE_TEST_ENDIANESS_STRINGS_LE)
+          message(SEND_ERROR "TEST_BIG_ENDIAN found no result!")
+        endif()
+
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
+          "Determining if the system is big endian passed with the following output:\n${OUTPUT}\nTestEndianess.c:\n${TEST_ENDIANESS_FILE_CONTENT}\n\n")
+
+      else()
+        message(STATUS "Check if the system is big endian - failed")
+        file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
+          "Determining if the system is big endian failed with the following output:\n${OUTPUT}\nTestEndianess.c:\n${TEST_ENDIANESS_FILE_CONTENT}\n\n")
+        set(${VARIABLE})
+      endif()
+  endif()
+endmacro()
+
+
diff --git a/share/cmake-3.2/Modules/TestCXXAcceptsFlag.cmake b/share/cmake-3.6/Modules/TestCXXAcceptsFlag.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/TestCXXAcceptsFlag.cmake
rename to share/cmake-3.6/Modules/TestCXXAcceptsFlag.cmake
diff --git a/share/cmake-3.2/Modules/TestEndianess.c.in b/share/cmake-3.6/Modules/TestEndianess.c.in
similarity index 100%
rename from share/cmake-3.2/Modules/TestEndianess.c.in
rename to share/cmake-3.6/Modules/TestEndianess.c.in
diff --git a/share/cmake-3.2/Modules/TestForANSIForScope.cmake b/share/cmake-3.6/Modules/TestForANSIForScope.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/TestForANSIForScope.cmake
rename to share/cmake-3.6/Modules/TestForANSIForScope.cmake
diff --git a/share/cmake-3.2/Modules/TestForANSIStreamHeaders.cmake b/share/cmake-3.6/Modules/TestForANSIStreamHeaders.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/TestForANSIStreamHeaders.cmake
rename to share/cmake-3.6/Modules/TestForANSIStreamHeaders.cmake
diff --git a/share/cmake-3.6/Modules/TestForANSIStreamHeaders.cxx b/share/cmake-3.6/Modules/TestForANSIStreamHeaders.cxx
new file mode 100644
index 0000000..d314d58
--- /dev/null
+++ b/share/cmake-3.6/Modules/TestForANSIStreamHeaders.cxx
@@ -0,0 +1,6 @@
+#include <iostream>
+
+int main(int, char* [])
+{
+  return 0;
+}
diff --git a/share/cmake-3.6/Modules/TestForAnsiForScope.cxx b/share/cmake-3.6/Modules/TestForAnsiForScope.cxx
new file mode 100644
index 0000000..4bc2c67
--- /dev/null
+++ b/share/cmake-3.6/Modules/TestForAnsiForScope.cxx
@@ -0,0 +1,8 @@
+int main(int, char* [])
+{
+  int i;
+  for (int i = 0; i < 1; ++i)
+    ;
+  (void)i;
+  return 0;
+}
diff --git a/share/cmake-3.2/Modules/TestForSSTREAM.cmake b/share/cmake-3.6/Modules/TestForSSTREAM.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/TestForSSTREAM.cmake
rename to share/cmake-3.6/Modules/TestForSSTREAM.cmake
diff --git a/share/cmake-3.6/Modules/TestForSSTREAM.cxx b/share/cmake-3.6/Modules/TestForSSTREAM.cxx
new file mode 100644
index 0000000..83a75e4
--- /dev/null
+++ b/share/cmake-3.6/Modules/TestForSSTREAM.cxx
@@ -0,0 +1,10 @@
+#include <sstream>
+int main(int, char* [])
+{
+  std::ostringstream os;
+  os << "12345";
+  if (os.str().size() == 5) {
+    return 0;
+  }
+  return -1;
+}
diff --git a/share/cmake-3.2/Modules/TestForSTDNamespace.cmake b/share/cmake-3.6/Modules/TestForSTDNamespace.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/TestForSTDNamespace.cmake
rename to share/cmake-3.6/Modules/TestForSTDNamespace.cmake
diff --git a/share/cmake-3.6/Modules/TestForSTDNamespace.cxx b/share/cmake-3.6/Modules/TestForSTDNamespace.cxx
new file mode 100644
index 0000000..62951ff
--- /dev/null
+++ b/share/cmake-3.6/Modules/TestForSTDNamespace.cxx
@@ -0,0 +1,6 @@
+#include <list>
+int main(int, char* [])
+{
+  std::list<int>();
+  return 0;
+}
diff --git a/share/cmake-3.2/Modules/UseEcos.cmake b/share/cmake-3.6/Modules/UseEcos.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/UseEcos.cmake
rename to share/cmake-3.6/Modules/UseEcos.cmake
diff --git a/share/cmake-3.6/Modules/UseJava.cmake b/share/cmake-3.6/Modules/UseJava.cmake
new file mode 100644
index 0000000..7b3416e
--- /dev/null
+++ b/share/cmake-3.6/Modules/UseJava.cmake
@@ -0,0 +1,1290 @@
+#.rst:
+# UseJava
+# -------
+#
+# Use Module for Java
+#
+# This file provides functions for Java.  It is assumed that
+# FindJava.cmake has already been loaded.  See FindJava.cmake for
+# information on how to load Java into your CMake project.
+#
+# ::
+#
+#  add_jar(target_name
+#          [SOURCES] source1 [source2 ...] [resource1 ...]
+#          [INCLUDE_JARS jar1 [jar2 ...]]
+#          [ENTRY_POINT entry]
+#          [VERSION version]
+#          [OUTPUT_NAME name]
+#          [OUTPUT_DIR dir]
+#          )
+#
+# This command creates a <target_name>.jar.  It compiles the given
+# source files (source) and adds the given resource files (resource) to
+# the jar file.  Source files can be java files or listing files
+# (prefixed by '@').  If only resource files are given then just a jar file
+# is created.  The list of include jars are added to the classpath when
+# compiling the java sources and also to the dependencies of the target.
+# INCLUDE_JARS also accepts other target names created by add_jar.  For
+# backwards compatibility, jar files listed as sources are ignored (as
+# they have been since the first version of this module).
+#
+# The default OUTPUT_DIR can also be changed by setting the variable
+# CMAKE_JAVA_TARGET_OUTPUT_DIR.
+#
+# Additional instructions:
+#
+# ::
+#
+#    To add compile flags to the target you can set these flags with
+#    the following variable:
+#
+#
+#
+# ::
+#
+#        set(CMAKE_JAVA_COMPILE_FLAGS -nowarn)
+#
+#
+#
+# ::
+#
+#    To add a path or a jar file to the class path you can do this
+#    with the CMAKE_JAVA_INCLUDE_PATH variable.
+#
+#
+#
+# ::
+#
+#        set(CMAKE_JAVA_INCLUDE_PATH /usr/share/java/shibboleet.jar)
+#
+#
+#
+# ::
+#
+#    To use a different output name for the target you can set it with:
+#
+#
+#
+# ::
+#
+#        add_jar(foobar foobar.java OUTPUT_NAME shibboleet.jar)
+#
+#
+#
+# ::
+#
+#    To use a different output directory than CMAKE_CURRENT_BINARY_DIR
+#    you can set it with:
+#
+#
+#
+# ::
+#
+#        add_jar(foobar foobar.java OUTPUT_DIR ${PROJECT_BINARY_DIR}/bin)
+#
+#
+#
+# ::
+#
+#    To define an entry point in your jar you can set it with the ENTRY_POINT
+#    named argument:
+#
+#
+#
+# ::
+#
+#        add_jar(example ENTRY_POINT com/examples/MyProject/Main)
+#
+#
+#
+# ::
+#
+#    To define a custom manifest for the jar, you can set it with the manifest
+#    named argument:
+#
+#
+#
+# ::
+#
+#        add_jar(example MANIFEST /path/to/manifest)
+#
+#
+#
+# ::
+#
+#    To add a VERSION to the target output name you can set it using
+#    the VERSION named argument to add_jar. This will create a jar file with the
+#    name shibboleet-1.0.0.jar and will create a symlink shibboleet.jar
+#    pointing to the jar with the version information.
+#
+#
+#
+# ::
+#
+#        add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
+#
+#
+#
+# ::
+#
+#     If the target is a JNI library, utilize the following commands to
+#     create a JNI symbolic link:
+#
+#
+#
+# ::
+#
+#        set(CMAKE_JNI_TARGET TRUE)
+#        add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
+#        install_jar(shibboleet ${LIB_INSTALL_DIR}/shibboleet)
+#        install_jni_symlink(shibboleet ${JAVA_LIB_INSTALL_DIR})
+#
+#
+#
+# ::
+#
+#     If a single target needs to produce more than one jar from its
+#     java source code, to prevent the accumulation of duplicate class
+#     files in subsequent jars, set/reset CMAKE_JAR_CLASSES_PREFIX prior
+#     to calling the add_jar() function:
+#
+#
+#
+# ::
+#
+#        set(CMAKE_JAR_CLASSES_PREFIX com/redhat/foo)
+#        add_jar(foo foo.java)
+#
+#
+#
+# ::
+#
+#        set(CMAKE_JAR_CLASSES_PREFIX com/redhat/bar)
+#        add_jar(bar bar.java)
+#
+#
+#
+# Target Properties:
+#
+# ::
+#
+#    The add_jar() function sets some target properties. You can get these
+#    properties with the
+#       get_property(TARGET <target_name> PROPERTY <propery_name>)
+#    command.
+#
+#
+#
+# ::
+#
+#    INSTALL_FILES      The files which should be installed. This is used by
+#                       install_jar().
+#    JNI_SYMLINK        The JNI symlink which should be installed.
+#                       This is used by install_jni_symlink().
+#    JAR_FILE           The location of the jar file so that you can include
+#                       it.
+#    CLASSDIR           The directory where the class files can be found. For
+#                       example to use them with javah.
+#
+# ::
+#
+#  find_jar(<VAR>
+#           name | NAMES name1 [name2 ...]
+#           [PATHS path1 [path2 ... ENV var]]
+#           [VERSIONS version1 [version2]]
+#           [DOC "cache documentation string"]
+#           )
+#
+# This command is used to find a full path to the named jar.  A cache
+# entry named by <VAR> is created to stor the result of this command.
+# If the full path to a jar is found the result is stored in the
+# variable and the search will not repeated unless the variable is
+# cleared.  If nothing is found, the result will be <VAR>-NOTFOUND, and
+# the search will be attempted again next time find_jar is invoked with
+# the same variable.  The name of the full path to a file that is
+# searched for is specified by the names listed after NAMES argument.
+# Additional search locations can be specified after the PATHS argument.
+# If you require special a version of a jar file you can specify it with
+# the VERSIONS argument.  The argument after DOC will be used for the
+# documentation string in the cache.
+#
+# ::
+#
+#  install_jar(target_name destination)
+#  install_jar(target_name DESTINATION destination [COMPONENT component])
+#
+# This command installs the TARGET_NAME files to the given DESTINATION.
+# It should be called in the same scope as add_jar() or it will fail.
+#
+# ::
+#
+#  install_jni_symlink(target_name destination)
+#  install_jni_symlink(target_name DESTINATION destination [COMPONENT component])
+#
+# This command installs the TARGET_NAME JNI symlinks to the given
+# DESTINATION.  It should be called in the same scope as add_jar() or it
+# will fail.
+#
+# ::
+#
+#  create_javadoc(<VAR>
+#                 PACKAGES pkg1 [pkg2 ...]
+#                 [SOURCEPATH <sourcepath>]
+#                 [CLASSPATH <classpath>]
+#                 [INSTALLPATH <install path>]
+#                 [DOCTITLE "the documentation title"]
+#                 [WINDOWTITLE "the title of the document"]
+#                 [AUTHOR TRUE|FALSE]
+#                 [USE TRUE|FALSE]
+#                 [VERSION TRUE|FALSE]
+#                 )
+#
+# Create java documentation based on files or packages.  For more
+# details please read the javadoc manpage.
+#
+# There are two main signatures for create_javadoc.  The first signature
+# works with package names on a path with source files:
+#
+# ::
+#
+#    Example:
+#    create_javadoc(my_example_doc
+#      PACKAGES com.exmaple.foo com.example.bar
+#      SOURCEPATH "${CMAKE_CURRENT_SOURCE_DIR}"
+#      CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
+#      WINDOWTITLE "My example"
+#      DOCTITLE "<h1>My example</h1>"
+#      AUTHOR TRUE
+#      USE TRUE
+#      VERSION TRUE
+#    )
+#
+#
+#
+# The second signature for create_javadoc works on a given list of
+# files.
+#
+# ::
+#
+#    create_javadoc(<VAR>
+#                   FILES file1 [file2 ...]
+#                   [CLASSPATH <classpath>]
+#                   [INSTALLPATH <install path>]
+#                   [DOCTITLE "the documentation title"]
+#                   [WINDOWTITLE "the title of the document"]
+#                   [AUTHOR TRUE|FALSE]
+#                   [USE TRUE|FALSE]
+#                   [VERSION TRUE|FALSE]
+#                  )
+#
+#
+#
+# Example:
+#
+# ::
+#
+#    create_javadoc(my_example_doc
+#      FILES ${example_SRCS}
+#      CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
+#      WINDOWTITLE "My example"
+#      DOCTITLE "<h1>My example</h1>"
+#      AUTHOR TRUE
+#      USE TRUE
+#      VERSION TRUE
+#    )
+#
+#
+#
+# Both signatures share most of the options.  These options are the same
+# as what you can find in the javadoc manpage.  Please look at the
+# manpage for CLASSPATH, DOCTITLE, WINDOWTITLE, AUTHOR, USE and VERSION.
+#
+# The documentation will be by default installed to
+#
+# ::
+#
+#    ${CMAKE_INSTALL_PREFIX}/share/javadoc/<VAR>
+#
+#
+#
+# if you don't set the INSTALLPATH.
+#
+# ::
+#
+#  create_javah(TARGET <target>
+#               GENERATED_FILES <VAR>
+#               CLASSES <class>...
+#               [CLASSPATH <classpath>...]
+#               [DEPENDS <depend>...]
+#               [OUTPUT_NAME <path>|OUTPUT_DIR <path>]
+#               )
+#
+# Create C header files from java classes. These files provide the connective glue
+# that allow your Java and C code to interact.
+#
+# There are two main signatures for create_javah.  The first signature
+# returns generated files through variable specified by GENERATED_FILES option:
+#
+# ::
+#
+#    Example:
+#    Create_javah(GENERATED_FILES files_headers
+#      CLASSES org.cmake.HelloWorld
+#      CLASSPATH hello.jar
+#    )
+#
+#
+#
+# The second signature for create_javah creates a target which encapsulates
+# header files generation.
+#
+# ::
+#
+#    Example:
+#    Create_javah(TARGET target_headers
+#      CLASSES org.cmake.HelloWorld
+#      CLASSPATH hello.jar
+#    )
+#
+#
+#
+# Both signatures share same options.
+#
+#  ``CLASSES <class>...``
+#    Specifies Java classes used to generate headers.
+#
+#  ``CLASSPATH <classpath>...``
+#    Specifies various paths to look up classes. Here .class files, jar files or targets
+#    created by command add_jar can be used.
+#
+#  ``DEPENDS <depend>...``
+#    Targets on which the javah target depends
+#
+#  ``OUTPUT_NAME <path>``
+#    Concatenates the resulting header files for all the classes listed by option CLASSES
+#    into <path>. Same behavior as option '-o' of javah tool.
+#
+#  ``OUTPUT_DIR <path>``
+#    Sets the directory where the header files will be generated. Same behavior as option
+#    '-d' of javah tool. If not specified, ${CMAKE_CURRENT_BINARY_DIR} is used as output directory.
+
+#=============================================================================
+# Copyright 2013 OpenGamma Ltd. <graham@opengamma.com>
+# Copyright 2010-2011 Andreas schneider <asn@redhat.com>
+# Copyright 2010-2013 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
+
+function (__java_copy_file src dest comment)
+    add_custom_command(
+        OUTPUT  ${dest}
+        COMMAND ${CMAKE_COMMAND} -E copy_if_different
+        ARGS    ${src}
+                ${dest}
+        DEPENDS ${src}
+        COMMENT ${comment})
+endfunction ()
+
+# define helper scripts
+set(_JAVA_CLASS_FILELIST_SCRIPT ${CMAKE_CURRENT_LIST_DIR}/UseJavaClassFilelist.cmake)
+set(_JAVA_SYMLINK_SCRIPT ${CMAKE_CURRENT_LIST_DIR}/UseJavaSymlinks.cmake)
+
+function(add_jar _TARGET_NAME)
+
+    cmake_parse_arguments(_add_jar
+      ""
+      "VERSION;OUTPUT_DIR;OUTPUT_NAME;ENTRY_POINT;MANIFEST"
+      "SOURCES;INCLUDE_JARS"
+      ${ARGN}
+    )
+
+    # In CMake < 2.8.12, add_jar used variables which were set prior to calling
+    # add_jar for customizing the behavior of add_jar. In order to be backwards
+    # compatible, check if any of those variables are set, and use them to
+    # initialize values of the named arguments. (Giving the corresponding named
+    # argument will override the value set here.)
+    #
+    # New features should use named arguments only.
+    if(NOT DEFINED _add_jar_VERSION AND DEFINED CMAKE_JAVA_TARGET_VERSION)
+        set(_add_jar_VERSION "${CMAKE_JAVA_TARGET_VERSION}")
+    endif()
+    if(NOT DEFINED _add_jar_OUTPUT_DIR AND DEFINED CMAKE_JAVA_TARGET_OUTPUT_DIR)
+        set(_add_jar_OUTPUT_DIR "${CMAKE_JAVA_TARGET_OUTPUT_DIR}")
+    endif()
+    if(NOT DEFINED _add_jar_OUTPUT_NAME AND DEFINED CMAKE_JAVA_TARGET_OUTPUT_NAME)
+        set(_add_jar_OUTPUT_NAME "${CMAKE_JAVA_TARGET_OUTPUT_NAME}")
+        # reset
+        set(CMAKE_JAVA_TARGET_OUTPUT_NAME)
+    endif()
+    if(NOT DEFINED _add_jar_ENTRY_POINT AND DEFINED CMAKE_JAVA_JAR_ENTRY_POINT)
+        set(_add_jar_ENTRY_POINT "${CMAKE_JAVA_JAR_ENTRY_POINT}")
+    endif()
+
+    set(_JAVA_SOURCE_FILES ${_add_jar_SOURCES} ${_add_jar_UNPARSED_ARGUMENTS})
+
+    if (NOT DEFINED _add_jar_OUTPUT_DIR)
+        set(_add_jar_OUTPUT_DIR ${CMAKE_CURRENT_BINARY_DIR})
+    endif()
+
+    if (_add_jar_ENTRY_POINT)
+        set(_ENTRY_POINT_OPTION e)
+        set(_ENTRY_POINT_VALUE ${_add_jar_ENTRY_POINT})
+    endif ()
+
+    if (_add_jar_MANIFEST)
+        set(_MANIFEST_OPTION m)
+        get_filename_component (_MANIFEST_VALUE "${_add_jar_MANIFEST}" ABSOLUTE)
+    endif ()
+
+    if (LIBRARY_OUTPUT_PATH)
+        set(CMAKE_JAVA_LIBRARY_OUTPUT_PATH ${LIBRARY_OUTPUT_PATH})
+    else ()
+        set(CMAKE_JAVA_LIBRARY_OUTPUT_PATH ${_add_jar_OUTPUT_DIR})
+    endif ()
+
+    set(CMAKE_JAVA_INCLUDE_PATH
+        ${CMAKE_JAVA_INCLUDE_PATH}
+        ${CMAKE_CURRENT_SOURCE_DIR}
+        ${CMAKE_JAVA_OBJECT_OUTPUT_PATH}
+        ${CMAKE_JAVA_LIBRARY_OUTPUT_PATH}
+    )
+
+    if (CMAKE_HOST_WIN32 AND NOT CYGWIN AND CMAKE_HOST_SYSTEM_NAME MATCHES "Windows")
+        set(CMAKE_JAVA_INCLUDE_FLAG_SEP ";")
+    else ()
+        set(CMAKE_JAVA_INCLUDE_FLAG_SEP ":")
+    endif()
+
+    foreach (JAVA_INCLUDE_DIR ${CMAKE_JAVA_INCLUDE_PATH})
+       set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${JAVA_INCLUDE_DIR}")
+    endforeach()
+
+    set(CMAKE_JAVA_CLASS_OUTPUT_PATH "${_add_jar_OUTPUT_DIR}${CMAKE_FILES_DIRECTORY}/${_TARGET_NAME}.dir")
+
+    set(_JAVA_TARGET_OUTPUT_NAME "${_TARGET_NAME}.jar")
+    if (_add_jar_OUTPUT_NAME AND _add_jar_VERSION)
+        set(_JAVA_TARGET_OUTPUT_NAME "${_add_jar_OUTPUT_NAME}-${_add_jar_VERSION}.jar")
+        set(_JAVA_TARGET_OUTPUT_LINK "${_add_jar_OUTPUT_NAME}.jar")
+    elseif (_add_jar_VERSION)
+        set(_JAVA_TARGET_OUTPUT_NAME "${_TARGET_NAME}-${_add_jar_VERSION}.jar")
+        set(_JAVA_TARGET_OUTPUT_LINK "${_TARGET_NAME}.jar")
+    elseif (_add_jar_OUTPUT_NAME)
+        set(_JAVA_TARGET_OUTPUT_NAME "${_add_jar_OUTPUT_NAME}.jar")
+    endif ()
+
+    set(_JAVA_CLASS_FILES)
+    set(_JAVA_COMPILE_FILES)
+    set(_JAVA_COMPILE_FILELISTS)
+    set(_JAVA_DEPENDS)
+    set(_JAVA_COMPILE_DEPENDS)
+    set(_JAVA_RESOURCE_FILES)
+    set(_JAVA_RESOURCE_FILES_RELATIVE)
+    foreach(_JAVA_SOURCE_FILE ${_JAVA_SOURCE_FILES})
+        get_filename_component(_JAVA_EXT ${_JAVA_SOURCE_FILE} EXT)
+        get_filename_component(_JAVA_FILE ${_JAVA_SOURCE_FILE} NAME_WE)
+        get_filename_component(_JAVA_PATH ${_JAVA_SOURCE_FILE} PATH)
+        get_filename_component(_JAVA_FULL ${_JAVA_SOURCE_FILE} ABSOLUTE)
+
+        if (_JAVA_SOURCE_FILE MATCHES "^@(.+)$")
+            get_filename_component(_JAVA_FULL ${CMAKE_MATCH_1} ABSOLUTE)
+            list(APPEND _JAVA_COMPILE_FILELISTS ${_JAVA_FULL})
+
+        elseif (_JAVA_EXT MATCHES ".java")
+            file(RELATIVE_PATH _JAVA_REL_BINARY_PATH ${_add_jar_OUTPUT_DIR} ${_JAVA_FULL})
+            file(RELATIVE_PATH _JAVA_REL_SOURCE_PATH ${CMAKE_CURRENT_SOURCE_DIR} ${_JAVA_FULL})
+            string(LENGTH ${_JAVA_REL_BINARY_PATH} _BIN_LEN)
+            string(LENGTH ${_JAVA_REL_SOURCE_PATH} _SRC_LEN)
+            if (${_BIN_LEN} LESS ${_SRC_LEN})
+                set(_JAVA_REL_PATH ${_JAVA_REL_BINARY_PATH})
+            else ()
+                set(_JAVA_REL_PATH ${_JAVA_REL_SOURCE_PATH})
+            endif ()
+            get_filename_component(_JAVA_REL_PATH ${_JAVA_REL_PATH} PATH)
+
+            list(APPEND _JAVA_COMPILE_FILES ${_JAVA_SOURCE_FILE})
+            set(_JAVA_CLASS_FILE "${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_REL_PATH}/${_JAVA_FILE}.class")
+            set(_JAVA_CLASS_FILES ${_JAVA_CLASS_FILES} ${_JAVA_CLASS_FILE})
+
+        elseif (_JAVA_EXT MATCHES ".jar"
+                OR _JAVA_EXT MATCHES ".war"
+                OR _JAVA_EXT MATCHES ".ear"
+                OR _JAVA_EXT MATCHES ".sar")
+            # Ignored for backward compatibility
+
+        elseif (_JAVA_EXT STREQUAL "")
+            list(APPEND CMAKE_JAVA_INCLUDE_PATH ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}} ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}_CLASSPATH})
+            list(APPEND _JAVA_DEPENDS ${JAVA_JAR_TARGET_${_JAVA_SOURCE_FILE}})
+
+        else ()
+            __java_copy_file(${CMAKE_CURRENT_SOURCE_DIR}/${_JAVA_SOURCE_FILE}
+                             ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE}
+                             "Copying ${_JAVA_SOURCE_FILE} to the build directory")
+            list(APPEND _JAVA_RESOURCE_FILES ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/${_JAVA_SOURCE_FILE})
+            list(APPEND _JAVA_RESOURCE_FILES_RELATIVE ${_JAVA_SOURCE_FILE})
+        endif ()
+    endforeach()
+
+    foreach(_JAVA_INCLUDE_JAR ${_add_jar_INCLUDE_JARS})
+        if (TARGET ${_JAVA_INCLUDE_JAR})
+            get_target_property(_JAVA_JAR_PATH ${_JAVA_INCLUDE_JAR} JAR_FILE)
+            if (_JAVA_JAR_PATH)
+                set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_JAR_PATH}")
+                list(APPEND CMAKE_JAVA_INCLUDE_PATH ${_JAVA_JAR_PATH})
+                list(APPEND _JAVA_DEPENDS ${_JAVA_INCLUDE_JAR})
+                list(APPEND _JAVA_COMPILE_DEPENDS ${_JAVA_INCLUDE_JAR})
+            else ()
+                message(SEND_ERROR "add_jar: INCLUDE_JARS target ${_JAVA_INCLUDE_JAR} is not a jar")
+            endif ()
+        else ()
+            set(CMAKE_JAVA_INCLUDE_PATH_FINAL "${CMAKE_JAVA_INCLUDE_PATH_FINAL}${CMAKE_JAVA_INCLUDE_FLAG_SEP}${_JAVA_INCLUDE_JAR}")
+            list(APPEND CMAKE_JAVA_INCLUDE_PATH "${_JAVA_INCLUDE_JAR}")
+            list(APPEND _JAVA_DEPENDS "${_JAVA_INCLUDE_JAR}")
+            list(APPEND _JAVA_COMPILE_DEPENDS "${_JAVA_INCLUDE_JAR}")
+        endif ()
+    endforeach()
+
+    # create an empty java_class_filelist
+    if (NOT EXISTS ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist)
+        file(WRITE ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist "")
+    endif()
+
+    if (_JAVA_COMPILE_FILES OR _JAVA_COMPILE_FILELISTS)
+        set (_JAVA_SOURCES_FILELISTS)
+
+        if (_JAVA_COMPILE_FILES)
+            # Create the list of files to compile.
+            set(_JAVA_SOURCES_FILE ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_sources)
+            string(REPLACE ";" "\"\n\"" _JAVA_COMPILE_STRING "\"${_JAVA_COMPILE_FILES}\"")
+            file(WRITE ${_JAVA_SOURCES_FILE} ${_JAVA_COMPILE_STRING})
+            list (APPEND _JAVA_SOURCES_FILELISTS "@${_JAVA_SOURCES_FILE}")
+        endif()
+        if (_JAVA_COMPILE_FILELISTS)
+            foreach (_JAVA_FILELIST IN LISTS _JAVA_COMPILE_FILELISTS)
+                list (APPEND _JAVA_SOURCES_FILELISTS "@${_JAVA_FILELIST}")
+            endforeach()
+        endif()
+
+        # Compile the java files and create a list of class files
+        add_custom_command(
+            # NOTE: this command generates an artificial dependency file
+            OUTPUT ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_compiled_${_TARGET_NAME}
+            COMMAND ${Java_JAVAC_EXECUTABLE}
+                ${CMAKE_JAVA_COMPILE_FLAGS}
+                -classpath "${CMAKE_JAVA_INCLUDE_PATH_FINAL}"
+                -d ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
+                ${_JAVA_SOURCES_FILELISTS}
+            COMMAND ${CMAKE_COMMAND} -E touch ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_compiled_${_TARGET_NAME}
+            DEPENDS ${_JAVA_COMPILE_FILES} ${_JAVA_COMPILE_FILELISTS} ${_JAVA_COMPILE_DEPENDS}
+            WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+            COMMENT "Building Java objects for ${_TARGET_NAME}.jar"
+        )
+        add_custom_command(
+            OUTPUT ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist
+            COMMAND ${CMAKE_COMMAND}
+                -DCMAKE_JAVA_CLASS_OUTPUT_PATH=${CMAKE_JAVA_CLASS_OUTPUT_PATH}
+                -DCMAKE_JAR_CLASSES_PREFIX="${CMAKE_JAR_CLASSES_PREFIX}"
+                -P ${_JAVA_CLASS_FILELIST_SCRIPT}
+            DEPENDS ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_compiled_${_TARGET_NAME}
+            WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+        )
+    endif ()
+
+    # create the jar file
+    set(_JAVA_JAR_OUTPUT_PATH
+      ${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_NAME})
+    if (CMAKE_JNI_TARGET)
+        add_custom_command(
+            OUTPUT ${_JAVA_JAR_OUTPUT_PATH}
+            COMMAND ${Java_JAR_EXECUTABLE}
+                -cf${_ENTRY_POINT_OPTION}${_MANIFEST_OPTION} ${_JAVA_JAR_OUTPUT_PATH} ${_ENTRY_POINT_VALUE} ${_MANIFEST_VALUE}
+                ${_JAVA_RESOURCE_FILES_RELATIVE} @java_class_filelist
+            COMMAND ${CMAKE_COMMAND}
+                -D_JAVA_TARGET_DIR=${_add_jar_OUTPUT_DIR}
+                -D_JAVA_TARGET_OUTPUT_NAME=${_JAVA_TARGET_OUTPUT_NAME}
+                -D_JAVA_TARGET_OUTPUT_LINK=${_JAVA_TARGET_OUTPUT_LINK}
+                -P ${_JAVA_SYMLINK_SCRIPT}
+            COMMAND ${CMAKE_COMMAND}
+                -D_JAVA_TARGET_DIR=${_add_jar_OUTPUT_DIR}
+                -D_JAVA_TARGET_OUTPUT_NAME=${_JAVA_JAR_OUTPUT_PATH}
+                -D_JAVA_TARGET_OUTPUT_LINK=${_JAVA_TARGET_OUTPUT_LINK}
+                -P ${_JAVA_SYMLINK_SCRIPT}
+            DEPENDS ${_JAVA_RESOURCE_FILES} ${_JAVA_DEPENDS} ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist
+            WORKING_DIRECTORY ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
+            COMMENT "Creating Java archive ${_JAVA_TARGET_OUTPUT_NAME}"
+        )
+    else ()
+        add_custom_command(
+            OUTPUT ${_JAVA_JAR_OUTPUT_PATH}
+            COMMAND ${Java_JAR_EXECUTABLE}
+                -cf${_ENTRY_POINT_OPTION}${_MANIFEST_OPTION} ${_JAVA_JAR_OUTPUT_PATH} ${_ENTRY_POINT_VALUE} ${_MANIFEST_VALUE}
+                ${_JAVA_RESOURCE_FILES_RELATIVE} @java_class_filelist
+            COMMAND ${CMAKE_COMMAND}
+                -D_JAVA_TARGET_DIR=${_add_jar_OUTPUT_DIR}
+                -D_JAVA_TARGET_OUTPUT_NAME=${_JAVA_TARGET_OUTPUT_NAME}
+                -D_JAVA_TARGET_OUTPUT_LINK=${_JAVA_TARGET_OUTPUT_LINK}
+                -P ${_JAVA_SYMLINK_SCRIPT}
+            WORKING_DIRECTORY ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
+            DEPENDS ${_JAVA_RESOURCE_FILES} ${_JAVA_DEPENDS} ${CMAKE_JAVA_CLASS_OUTPUT_PATH}/java_class_filelist
+            COMMENT "Creating Java archive ${_JAVA_TARGET_OUTPUT_NAME}"
+        )
+    endif ()
+
+    # Add the target and make sure we have the latest resource files.
+    add_custom_target(${_TARGET_NAME} ALL DEPENDS ${_JAVA_JAR_OUTPUT_PATH})
+
+    set_property(
+        TARGET
+            ${_TARGET_NAME}
+        PROPERTY
+            INSTALL_FILES
+                ${_JAVA_JAR_OUTPUT_PATH}
+    )
+
+    if (_JAVA_TARGET_OUTPUT_LINK)
+        set_property(
+            TARGET
+                ${_TARGET_NAME}
+            PROPERTY
+                INSTALL_FILES
+                    ${_JAVA_JAR_OUTPUT_PATH}
+                    ${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_LINK}
+        )
+
+        if (CMAKE_JNI_TARGET)
+            set_property(
+                TARGET
+                    ${_TARGET_NAME}
+                PROPERTY
+                    JNI_SYMLINK
+                        ${_add_jar_OUTPUT_DIR}/${_JAVA_TARGET_OUTPUT_LINK}
+            )
+        endif ()
+    endif ()
+
+    set_property(
+        TARGET
+            ${_TARGET_NAME}
+        PROPERTY
+            JAR_FILE
+                ${_JAVA_JAR_OUTPUT_PATH}
+    )
+
+    set_property(
+        TARGET
+            ${_TARGET_NAME}
+        PROPERTY
+            CLASSDIR
+                ${CMAKE_JAVA_CLASS_OUTPUT_PATH}
+    )
+
+endfunction()
+
+function(INSTALL_JAR _TARGET_NAME)
+    if (ARGC EQUAL 2)
+      set (_DESTINATION ${ARGV1})
+    else()
+      cmake_parse_arguments(_install_jar
+        ""
+        "DESTINATION;COMPONENT"
+        ""
+        ${ARGN})
+      if (_install_jar_DESTINATION)
+        set (_DESTINATION ${_install_jar_DESTINATION})
+      else()
+        message(SEND_ERROR "install_jar: ${_TARGET_NAME}: DESTINATION must be specified.")
+      endif()
+
+      if (_install_jar_COMPONENT)
+        set (_COMPONENT COMPONENT ${_install_jar_COMPONENT})
+      endif()
+    endif()
+
+    get_property(__FILES
+        TARGET
+            ${_TARGET_NAME}
+        PROPERTY
+            INSTALL_FILES
+    )
+
+    if (__FILES)
+        install(
+            FILES
+                ${__FILES}
+            DESTINATION
+                ${_DESTINATION}
+            ${_COMPONENT}
+        )
+    else ()
+        message(SEND_ERROR "install_jar: The target ${_TARGET_NAME} is not known in this scope.")
+    endif ()
+endfunction()
+
+function(INSTALL_JNI_SYMLINK _TARGET_NAME)
+    if (ARGC EQUAL 2)
+      set (_DESTINATION ${ARGV1})
+    else()
+      cmake_parse_arguments(_install_jni_symlink
+        ""
+        "DESTINATION;COMPONENT"
+        ""
+        ${ARGN})
+      if (_install_jni_symlink_DESTINATION)
+        set (_DESTINATION ${_install_jni_symlink_DESTINATION})
+      else()
+        message(SEND_ERROR "install_jni_symlink: ${_TARGET_NAME}: DESTINATION must be specified.")
+      endif()
+
+      if (_install_jni_symlink_COMPONENT)
+        set (_COMPONENT COMPONENT ${_install_jni_symlink_COMPONENT})
+      endif()
+    endif()
+
+    get_property(__SYMLINK
+        TARGET
+            ${_TARGET_NAME}
+        PROPERTY
+            JNI_SYMLINK
+    )
+
+    if (__SYMLINK)
+        install(
+            FILES
+                ${__SYMLINK}
+            DESTINATION
+                ${_DESTINATION}
+            ${_COMPONENT}
+        )
+    else ()
+        message(SEND_ERROR "install_jni_symlink: The target ${_TARGET_NAME} is not known in this scope.")
+    endif ()
+endfunction()
+
+function (find_jar VARIABLE)
+    set(_jar_names)
+    set(_jar_files)
+    set(_jar_versions)
+    set(_jar_paths
+        /usr/share/java/
+        /usr/local/share/java/
+        ${Java_JAR_PATHS})
+    set(_jar_doc "NOTSET")
+
+    set(_state "name")
+
+    foreach (arg ${ARGN})
+        if (${_state} STREQUAL "name")
+            if (${arg} STREQUAL "VERSIONS")
+                set(_state "versions")
+            elseif (${arg} STREQUAL "NAMES")
+                set(_state "names")
+            elseif (${arg} STREQUAL "PATHS")
+                set(_state "paths")
+            elseif (${arg} STREQUAL "DOC")
+                set(_state "doc")
+            else ()
+                set(_jar_names ${arg})
+                if (_jar_doc STREQUAL "NOTSET")
+                    set(_jar_doc "Finding ${arg} jar")
+                endif ()
+            endif ()
+        elseif (${_state} STREQUAL "versions")
+            if (${arg} STREQUAL "NAMES")
+                set(_state "names")
+            elseif (${arg} STREQUAL "PATHS")
+                set(_state "paths")
+            elseif (${arg} STREQUAL "DOC")
+                set(_state "doc")
+            else ()
+                set(_jar_versions ${_jar_versions} ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "names")
+            if (${arg} STREQUAL "VERSIONS")
+                set(_state "versions")
+            elseif (${arg} STREQUAL "PATHS")
+                set(_state "paths")
+            elseif (${arg} STREQUAL "DOC")
+                set(_state "doc")
+            else ()
+                set(_jar_names ${_jar_names} ${arg})
+                if (_jar_doc STREQUAL "NOTSET")
+                    set(_jar_doc "Finding ${arg} jar")
+                endif ()
+            endif ()
+        elseif (${_state} STREQUAL "paths")
+            if (${arg} STREQUAL "VERSIONS")
+                set(_state "versions")
+            elseif (${arg} STREQUAL "NAMES")
+                set(_state "names")
+            elseif (${arg} STREQUAL "DOC")
+                set(_state "doc")
+            else ()
+                set(_jar_paths ${_jar_paths} ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "doc")
+            if (${arg} STREQUAL "VERSIONS")
+                set(_state "versions")
+            elseif (${arg} STREQUAL "NAMES")
+                set(_state "names")
+            elseif (${arg} STREQUAL "PATHS")
+                set(_state "paths")
+            else ()
+                set(_jar_doc ${arg})
+            endif ()
+        endif ()
+    endforeach ()
+
+    if (NOT _jar_names)
+        message(FATAL_ERROR "find_jar: No name to search for given")
+    endif ()
+
+    foreach (jar_name ${_jar_names})
+        foreach (version ${_jar_versions})
+            set(_jar_files ${_jar_files} ${jar_name}-${version}.jar)
+        endforeach ()
+        set(_jar_files ${_jar_files} ${jar_name}.jar)
+    endforeach ()
+
+    find_file(${VARIABLE}
+        NAMES   ${_jar_files}
+        PATHS   ${_jar_paths}
+        DOC     ${_jar_doc}
+        NO_DEFAULT_PATH)
+endfunction ()
+
+function(create_javadoc _target)
+    set(_javadoc_packages)
+    set(_javadoc_files)
+    set(_javadoc_sourcepath)
+    set(_javadoc_classpath)
+    set(_javadoc_installpath "${CMAKE_INSTALL_PREFIX}/share/javadoc")
+    set(_javadoc_doctitle)
+    set(_javadoc_windowtitle)
+    set(_javadoc_author FALSE)
+    set(_javadoc_version FALSE)
+    set(_javadoc_use FALSE)
+
+    set(_state "package")
+
+    foreach (arg ${ARGN})
+        if (${_state} STREQUAL "package")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                set(_javadoc_packages ${arg})
+                set(_state "packages")
+            endif ()
+        elseif (${_state} STREQUAL "packages")
+            if (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                list(APPEND _javadoc_packages ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "files")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                list(APPEND _javadoc_files ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "sourcepath")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                list(APPEND _javadoc_sourcepath ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "classpath")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                list(APPEND _javadoc_classpath ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "installpath")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                set(_javadoc_installpath ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "doctitle")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                set(_javadoc_doctitle ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "windowtitle")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                set(_javadoc_windowtitle ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "author")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                set(_javadoc_author ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "use")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                set(_javadoc_use ${arg})
+            endif ()
+        elseif (${_state} STREQUAL "version")
+            if (${arg} STREQUAL "PACKAGES")
+                set(_state "packages")
+            elseif (${arg} STREQUAL "FILES")
+                set(_state "files")
+            elseif (${arg} STREQUAL "SOURCEPATH")
+                set(_state "sourcepath")
+            elseif (${arg} STREQUAL "CLASSPATH")
+                set(_state "classpath")
+            elseif (${arg} STREQUAL "INSTALLPATH")
+                set(_state "installpath")
+            elseif (${arg} STREQUAL "DOCTITLE")
+                set(_state "doctitle")
+            elseif (${arg} STREQUAL "WINDOWTITLE")
+                set(_state "windowtitle")
+            elseif (${arg} STREQUAL "AUTHOR")
+                set(_state "author")
+            elseif (${arg} STREQUAL "USE")
+                set(_state "use")
+            elseif (${arg} STREQUAL "VERSION")
+                set(_state "version")
+            else ()
+                set(_javadoc_version ${arg})
+            endif ()
+        endif ()
+    endforeach ()
+
+    set(_javadoc_builddir ${CMAKE_CURRENT_BINARY_DIR}/javadoc/${_target})
+    set(_javadoc_options -d ${_javadoc_builddir})
+
+    if (_javadoc_sourcepath)
+        set(_start TRUE)
+        foreach(_path ${_javadoc_sourcepath})
+            if (_start)
+                set(_sourcepath ${_path})
+                set(_start FALSE)
+            else ()
+                set(_sourcepath ${_sourcepath}:${_path})
+            endif ()
+        endforeach()
+        set(_javadoc_options ${_javadoc_options} -sourcepath ${_sourcepath})
+    endif ()
+
+    if (_javadoc_classpath)
+        set(_start TRUE)
+        foreach(_path ${_javadoc_classpath})
+            if (_start)
+                set(_classpath ${_path})
+                set(_start FALSE)
+            else ()
+                set(_classpath ${_classpath}:${_path})
+            endif ()
+        endforeach()
+        set(_javadoc_options ${_javadoc_options} -classpath "${_classpath}")
+    endif ()
+
+    if (_javadoc_doctitle)
+        set(_javadoc_options ${_javadoc_options} -doctitle '${_javadoc_doctitle}')
+    endif ()
+
+    if (_javadoc_windowtitle)
+        set(_javadoc_options ${_javadoc_options} -windowtitle '${_javadoc_windowtitle}')
+    endif ()
+
+    if (_javadoc_author)
+        set(_javadoc_options ${_javadoc_options} -author)
+    endif ()
+
+    if (_javadoc_use)
+        set(_javadoc_options ${_javadoc_options} -use)
+    endif ()
+
+    if (_javadoc_version)
+        set(_javadoc_options ${_javadoc_options} -version)
+    endif ()
+
+    add_custom_target(${_target}_javadoc ALL
+        COMMAND ${Java_JAVADOC_EXECUTABLE} ${_javadoc_options}
+                            ${_javadoc_files}
+                            ${_javadoc_packages}
+        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+    )
+
+    install(
+        DIRECTORY ${_javadoc_builddir}
+        DESTINATION ${_javadoc_installpath}
+    )
+endfunction()
+
+function (create_javah)
+    cmake_parse_arguments(_create_javah
+      ""
+      "TARGET;GENERATED_FILES;OUTPUT_NAME;OUTPUT_DIR"
+      "CLASSES;CLASSPATH;DEPENDS"
+      ${ARGN})
+
+    # ckeck parameters
+    if (NOT _create_javah_TARGET AND NOT _create_javah_GENERATED_FILES)
+      message (FATAL_ERROR "create_javah: TARGET or GENERATED_FILES must be specified.")
+    endif()
+    if (_create_javah_OUTPUT_NAME AND _create_javah_OUTPUT_DIR)
+      message (FATAL_ERROR "create_javah: OUTPUT_NAME and OUTPUT_DIR are mutually exclusive.")
+    endif()
+
+    if (NOT _create_javah_CLASSES)
+      message (FATAL_ERROR "create_javah: CLASSES is a required parameter.")
+    endif()
+
+    set (_output_files)
+    if (WIN32 AND NOT CYGWIN AND CMAKE_HOST_SYSTEM_NAME MATCHES "Windows")
+      set(_classpath_sep "$<SEMICOLON>")
+    else ()
+      set(_classpath_sep ":")
+    endif()
+
+    # handle javah options
+    set (_javah_options)
+
+    if (_create_javah_CLASSPATH)
+      # CLASSPATH can specify directories, jar files or targets created with add_jar command
+      set (_classpath)
+      foreach (_path IN LISTS _create_javah_CLASSPATH)
+        if (TARGET ${_path})
+          get_target_property (_jar_path ${_path} JAR_FILE)
+          if (_jar_path)
+            list (APPEND _classpath "${_jar_path}")
+            list (APPEND _create_javah_DEPENDS "${_path}")
+          else()
+            message(SEND_ERROR "create_javah: CLASSPATH target ${_path} is not a jar.")
+          endif()
+        elseif (EXISTS "${_path}")
+          list (APPEND _classpath "${_path}")
+          if (NOT IS_DIRECTORY "${_path}")
+            list (APPEND _create_javah_DEPENDS "${_path}")
+          endif()
+        else()
+          message(SEND_ERROR "create_javah: CLASSPATH entry ${_path} does not exist.")
+        endif()
+      endforeach()
+      string (REPLACE ";" "${_classpath_sep}" _classpath "${_classpath}")
+      list (APPEND _javah_options -classpath "${_classpath}")
+    endif()
+
+    if (_create_javah_OUTPUT_DIR)
+      list (APPEND _javah_options -d "${_create_javah_OUTPUT_DIR}")
+    endif()
+
+    if (_create_javah_OUTPUT_NAME)
+      list (APPEND _javah_options -o "${_create_javah_OUTPUT_NAME}")
+      set (_output_files "${_create_javah_OUTPUT_NAME}")
+
+      get_filename_component (_create_javah_OUTPUT_DIR "${_create_javah_OUTPUT_NAME}" DIRECTORY)
+      get_filename_component (_create_javah_OUTPUT_DIR "${_create_javah_OUTPUT_DIR}" ABSOLUTE)
+    endif()
+
+    if (NOT _create_javah_OUTPUT_DIR)
+      set (_create_javah_OUTPUT_DIR "${CMAKE_CURRENT_BINARY_DIR}")
+    endif()
+
+    if (NOT _create_javah_OUTPUT_NAME)
+      # compute output names
+      foreach (_class IN LISTS _create_javah_CLASSES)
+        string (REPLACE "." "_" _c_header "${_class}")
+        set (_c_header  "${_create_javah_OUTPUT_DIR}/${_c_header}.h")
+        list (APPEND _output_files "${_c_header}")
+      endforeach()
+    endif()
+
+    # finalize custom command arguments
+    if (_create_javah_DEPENDS)
+      list (INSERT _create_javah_DEPENDS 0 DEPENDS)
+    endif()
+
+    add_custom_command (OUTPUT ${_output_files}
+      COMMAND "${Java_JAVAH_EXECUTABLE}" ${_javah_options} -jni ${_create_javah_CLASSES}
+      ${_create_javah_DEPENDS}
+      WORKING_DIRECTORY ${_create_javah_OUTPUT_DIR}
+      COMMENT "Building C header files from classes...")
+
+    if (_create_javah_TARGET)
+      add_custom_target (${_create_javah_TARGET} ALL DEPENDS ${_output_files})
+    endif()
+    if (_create_javah_GENERATED_FILES)
+      set (${_create_javah_GENERATED_FILES} ${_output_files} PARENT_SCOPE)
+    endif()
+endfunction()
diff --git a/share/cmake-3.2/Modules/UseJavaClassFilelist.cmake b/share/cmake-3.6/Modules/UseJavaClassFilelist.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/UseJavaClassFilelist.cmake
rename to share/cmake-3.6/Modules/UseJavaClassFilelist.cmake
diff --git a/share/cmake-3.2/Modules/UseJavaSymlinks.cmake b/share/cmake-3.6/Modules/UseJavaSymlinks.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/UseJavaSymlinks.cmake
rename to share/cmake-3.6/Modules/UseJavaSymlinks.cmake
diff --git a/share/cmake-3.2/Modules/UsePkgConfig.cmake b/share/cmake-3.6/Modules/UsePkgConfig.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/UsePkgConfig.cmake
rename to share/cmake-3.6/Modules/UsePkgConfig.cmake
diff --git a/share/cmake-3.2/Modules/UseQt4.cmake b/share/cmake-3.6/Modules/UseQt4.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/UseQt4.cmake
rename to share/cmake-3.6/Modules/UseQt4.cmake
diff --git a/share/cmake-3.6/Modules/UseSWIG.cmake b/share/cmake-3.6/Modules/UseSWIG.cmake
new file mode 100644
index 0000000..d757f65
--- /dev/null
+++ b/share/cmake-3.6/Modules/UseSWIG.cmake
@@ -0,0 +1,303 @@
+#.rst:
+# UseSWIG
+# -------
+#
+# Defines the following macros for use with SWIG:
+#
+# ::
+#
+#    SWIG_ADD_MODULE(name language [ files ])
+#      - Define swig module with given name and specified language
+#    SWIG_LINK_LIBRARIES(name [ libraries ])
+#      - Link libraries to swig module
+#
+# Source files properties on module files can be set before the invocation
+# of the SWIG_ADD_MODULE macro to specify special behavior of SWIG.
+#
+# The source file property CPLUSPLUS calls SWIG in c++ mode, e.g.::
+#
+#    set_property(SOURCE mymod.i PROPERTY CPLUSPLUS ON)
+#    swig_add_module(mymod python mymod.i)
+#
+# The source file property SWIG_FLAGS adds custom flags to the SWIG executable.
+#
+# The source-file property SWIG_MODULE_NAME have to be provided to specify the actual
+# import name of the module in the target language if it cannot be scanned automatically
+# from source or different from the module file basename.::
+#
+#    set_property(SOURCE mymod.i PROPERTY SWIG_MODULE_NAME mymod_realname)
+#
+# To get the name of the swig module target library, use: ${SWIG_MODULE_${name}_REAL_NAME}.
+#
+# Also some variables can be set to specify special behavior of SWIG.
+#
+# CMAKE_SWIG_FLAGS can be used to add special flags to all swig calls.
+#
+# Another special variable is CMAKE_SWIG_OUTDIR, it allows one to specify
+# where to write all the swig generated module (swig -outdir option)
+#
+# The name-specific variable SWIG_MODULE_<name>_EXTRA_DEPS may be used to specify extra
+# dependencies for the generated modules.
+#
+# If the source file generated by swig need some special flag you can use::
+#
+#    set_source_files_properties( ${swig_generated_file_fullname}
+#                                 PROPERTIES COMPILE_FLAGS "-bla")
+
+#=============================================================================
+# Copyright 2004-2009 Kitware, Inc.
+# Copyright 2009 Mathieu Malaterre <mathieu.malaterre@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+set(SWIG_CXX_EXTENSION "cxx")
+set(SWIG_EXTRA_LIBRARIES "")
+
+set(SWIG_PYTHON_EXTRA_FILE_EXTENSION "py")
+
+#
+# For given swig module initialize variables associated with it
+#
+macro(SWIG_MODULE_INITIALIZE name language)
+  string(TOUPPER "${language}" swig_uppercase_language)
+  string(TOLOWER "${language}" swig_lowercase_language)
+  set(SWIG_MODULE_${name}_LANGUAGE "${swig_uppercase_language}")
+  set(SWIG_MODULE_${name}_SWIG_LANGUAGE_FLAG "${swig_lowercase_language}")
+
+  set(SWIG_MODULE_${name}_REAL_NAME "${name}")
+  if (";${CMAKE_SWIG_FLAGS};" MATCHES ";-noproxy;")
+    set (SWIG_MODULE_${name}_NOPROXY TRUE)
+  endif ()
+  if("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xUNKNOWN")
+    message(FATAL_ERROR "SWIG Error: Language \"${language}\" not found")
+  elseif("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xPYTHON" AND NOT SWIG_MODULE_${name}_NOPROXY)
+    # swig will produce a module.py containing an 'import _modulename' statement,
+    # which implies having a corresponding _modulename.so (*NIX), _modulename.pyd (Win32),
+    # unless the -noproxy flag is used
+    set(SWIG_MODULE_${name}_REAL_NAME "_${name}")
+  elseif("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xPERL")
+    set(SWIG_MODULE_${name}_EXTRA_FLAGS "-shadow")
+  elseif("x${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "xCSHARP")
+    # This makes sure that the name used in the generated DllImport
+    # matches the library name created by CMake
+    set(SWIG_MODULE_${name}_EXTRA_FLAGS "-dllimport;${name}")
+  endif()
+endmacro()
+
+#
+# For a given language, input file, and output file, determine extra files that
+# will be generated. This is internal swig macro.
+#
+
+macro(SWIG_GET_EXTRA_OUTPUT_FILES language outfiles generatedpath infile)
+  set(${outfiles} "")
+  get_source_file_property(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename
+    ${infile} SWIG_MODULE_NAME)
+  if(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename STREQUAL "NOTFOUND")
+
+    # try to get module name from "%module foo" syntax
+    if ( EXISTS ${infile} )
+      file ( STRINGS ${infile} _MODULE_NAME REGEX "[ ]*%module[ ]*[a-zA-Z0-9_]+.*" )
+    endif ()
+    if ( _MODULE_NAME )
+      string ( REGEX REPLACE "[ ]*%module[ ]*([a-zA-Z0-9_]+).*" "\\1" _MODULE_NAME "${_MODULE_NAME}" )
+      set(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename "${_MODULE_NAME}")
+
+    else ()
+      # try to get module name from "%module (options=...) foo" syntax
+      if ( EXISTS ${infile} )
+        file ( STRINGS ${infile} _MODULE_NAME REGEX "[ ]*%module[ ]*\\(.*\\)[ ]*[a-zA-Z0-9_]+.*" )
+      endif ()
+      if ( _MODULE_NAME )
+        string ( REGEX REPLACE "[ ]*%module[ ]*\\(.*\\)[ ]*([a-zA-Z0-9_]+).*" "\\1" _MODULE_NAME "${_MODULE_NAME}" )
+        set(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename "${_MODULE_NAME}")
+
+      else ()
+        # fallback to file basename
+        get_filename_component(SWIG_GET_EXTRA_OUTPUT_FILES_module_basename ${infile} NAME_WE)
+      endif ()
+    endif ()
+
+  endif()
+  foreach(it ${SWIG_${language}_EXTRA_FILE_EXTENSION})
+    set(${outfiles} ${${outfiles}}
+      "${generatedpath}/${SWIG_GET_EXTRA_OUTPUT_FILES_module_basename}.${it}")
+  endforeach()
+endmacro()
+
+#
+# Take swig (*.i) file and add proper custom commands for it
+#
+macro(SWIG_ADD_SOURCE_TO_MODULE name outfiles infile)
+  set(swig_full_infile ${infile})
+  get_filename_component(swig_source_file_name_we "${infile}" NAME_WE)
+  get_source_file_property(swig_source_file_generated ${infile} GENERATED)
+  get_source_file_property(swig_source_file_cplusplus ${infile} CPLUSPLUS)
+  get_source_file_property(swig_source_file_flags ${infile} SWIG_FLAGS)
+  if("${swig_source_file_flags}" STREQUAL "NOTFOUND")
+    set(swig_source_file_flags "")
+  endif()
+  get_filename_component(swig_source_file_fullname "${infile}" ABSOLUTE)
+
+  # If CMAKE_SWIG_OUTDIR was specified then pass it to -outdir
+  if(CMAKE_SWIG_OUTDIR)
+    set(swig_outdir ${CMAKE_SWIG_OUTDIR})
+  else()
+    set(swig_outdir ${CMAKE_CURRENT_BINARY_DIR})
+  endif()
+  if (NOT SWIG_MODULE_${name}_NOPROXY)
+    SWIG_GET_EXTRA_OUTPUT_FILES(${SWIG_MODULE_${name}_LANGUAGE}
+      swig_extra_generated_files
+      "${swig_outdir}"
+      "${swig_source_file_fullname}")
+  endif()
+  set(swig_generated_file_fullname
+    "${swig_outdir}/${swig_source_file_name_we}")
+  # add the language into the name of the file (i.e. TCL_wrap)
+  # this allows for the same .i file to be wrapped into different languages
+  set(swig_generated_file_fullname
+    "${swig_generated_file_fullname}${SWIG_MODULE_${name}_LANGUAGE}_wrap")
+
+  if(swig_source_file_cplusplus)
+    set(swig_generated_file_fullname
+      "${swig_generated_file_fullname}.${SWIG_CXX_EXTENSION}")
+  else()
+    set(swig_generated_file_fullname
+      "${swig_generated_file_fullname}.c")
+  endif()
+
+  #message("Full path to source file: ${swig_source_file_fullname}")
+  #message("Full path to the output file: ${swig_generated_file_fullname}")
+  get_directory_property(cmake_include_directories INCLUDE_DIRECTORIES)
+  list(REMOVE_DUPLICATES cmake_include_directories)
+  set(swig_include_dirs)
+  foreach(it ${cmake_include_directories})
+    set(swig_include_dirs ${swig_include_dirs} "-I${it}")
+  endforeach()
+
+  set(swig_special_flags)
+  # default is c, so add c++ flag if it is c++
+  if(swig_source_file_cplusplus)
+    set(swig_special_flags ${swig_special_flags} "-c++")
+  endif()
+  set(swig_extra_flags)
+  if(SWIG_MODULE_${name}_EXTRA_FLAGS)
+    set(swig_extra_flags ${swig_extra_flags} ${SWIG_MODULE_${name}_EXTRA_FLAGS})
+  endif()
+  add_custom_command(
+    OUTPUT "${swig_generated_file_fullname}" ${swig_extra_generated_files}
+    # Let's create the ${swig_outdir} at execution time, in case dir contains $(OutDir)
+    COMMAND ${CMAKE_COMMAND} -E make_directory ${swig_outdir}
+    COMMAND "${SWIG_EXECUTABLE}"
+    ARGS "-${SWIG_MODULE_${name}_SWIG_LANGUAGE_FLAG}"
+    ${swig_source_file_flags}
+    ${CMAKE_SWIG_FLAGS}
+    -outdir ${swig_outdir}
+    ${swig_special_flags}
+    ${swig_extra_flags}
+    ${swig_include_dirs}
+    -o "${swig_generated_file_fullname}"
+    "${swig_source_file_fullname}"
+    MAIN_DEPENDENCY "${swig_source_file_fullname}"
+    DEPENDS ${SWIG_MODULE_${name}_EXTRA_DEPS}
+    COMMENT "Swig source")
+  set_source_files_properties("${swig_generated_file_fullname}" ${swig_extra_generated_files}
+    PROPERTIES GENERATED 1)
+  set(${outfiles} "${swig_generated_file_fullname}" ${swig_extra_generated_files})
+endmacro()
+
+#
+# Create Swig module
+#
+macro(SWIG_ADD_MODULE name language)
+  SWIG_MODULE_INITIALIZE(${name} ${language})
+  set(swig_dot_i_sources)
+  set(swig_other_sources)
+  foreach(it ${ARGN})
+    if(${it} MATCHES "\\.i$")
+      set(swig_dot_i_sources ${swig_dot_i_sources} "${it}")
+    else()
+      set(swig_other_sources ${swig_other_sources} "${it}")
+    endif()
+  endforeach()
+
+  set(swig_generated_sources)
+  foreach(it ${swig_dot_i_sources})
+    SWIG_ADD_SOURCE_TO_MODULE(${name} swig_generated_source ${it})
+    set(swig_generated_sources ${swig_generated_sources} "${swig_generated_source}")
+  endforeach()
+  get_directory_property(swig_extra_clean_files ADDITIONAL_MAKE_CLEAN_FILES)
+  set_directory_properties(PROPERTIES
+    ADDITIONAL_MAKE_CLEAN_FILES "${swig_extra_clean_files};${swig_generated_sources}")
+  add_library(${SWIG_MODULE_${name}_REAL_NAME}
+    MODULE
+    ${swig_generated_sources}
+    ${swig_other_sources})
+  set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES NO_SONAME ON)
+  string(TOLOWER "${language}" swig_lowercase_language)
+  if ("${swig_lowercase_language}" STREQUAL "octave")
+    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
+    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".oct")
+  elseif ("${swig_lowercase_language}" STREQUAL "go")
+    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
+  elseif ("${swig_lowercase_language}" STREQUAL "java")
+    if (APPLE)
+        # In java you want:
+        #      System.loadLibrary("LIBRARY");
+        # then JNI will look for a library whose name is platform dependent, namely
+        #   MacOS  : libLIBRARY.jnilib
+        #   Windows: LIBRARY.dll
+        #   Linux  : libLIBRARY.so
+        set_target_properties (${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".jnilib")
+      endif ()
+  elseif ("${swig_lowercase_language}" STREQUAL "lua")
+    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
+  elseif ("${swig_lowercase_language}" STREQUAL "python")
+    # this is only needed for the python case where a _modulename.so is generated
+    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
+    # Python extension modules on Windows must have the extension ".pyd"
+    # instead of ".dll" as of Python 2.5.  Older python versions do support
+    # this suffix.
+    # http://docs.python.org/whatsnew/ports.html#SECTION0001510000000000000000
+    # <quote>
+    # Windows: .dll is no longer supported as a filename extension for extension modules.
+    # .pyd is now the only filename extension that will be searched for.
+    # </quote>
+    if(WIN32 AND NOT CYGWIN)
+      set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".pyd")
+    endif()
+  elseif ("${swig_lowercase_language}" STREQUAL "r")
+    set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
+  elseif ("${swig_lowercase_language}" STREQUAL "ruby")
+    # In ruby you want:
+    #      require 'LIBRARY'
+    # then ruby will look for a library whose name is platform dependent, namely
+    #   MacOS  : LIBRARY.bundle
+    #   Windows: LIBRARY.dll
+    #   Linux  : LIBRARY.so
+    set_target_properties (${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "")
+    if (APPLE)
+      set_target_properties (${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".bundle")
+    endif ()
+  endif ()
+endmacro()
+
+#
+# Like TARGET_LINK_LIBRARIES but for swig modules
+#
+macro(SWIG_LINK_LIBRARIES name)
+  if(SWIG_MODULE_${name}_REAL_NAME)
+    target_link_libraries(${SWIG_MODULE_${name}_REAL_NAME} ${ARGN})
+  else()
+    message(SEND_ERROR "Cannot find Swig library \"${name}\".")
+  endif()
+endmacro()
+
diff --git a/share/cmake-3.2/Modules/Use_wxWindows.cmake b/share/cmake-3.6/Modules/Use_wxWindows.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/Use_wxWindows.cmake
rename to share/cmake-3.6/Modules/Use_wxWindows.cmake
diff --git a/share/cmake-3.2/Modules/UsewxWidgets.cmake b/share/cmake-3.6/Modules/UsewxWidgets.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/UsewxWidgets.cmake
rename to share/cmake-3.6/Modules/UsewxWidgets.cmake
diff --git a/share/cmake-3.2/Modules/VTKCompatibility.cmake b/share/cmake-3.6/Modules/VTKCompatibility.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/VTKCompatibility.cmake
rename to share/cmake-3.6/Modules/VTKCompatibility.cmake
diff --git a/share/cmake-3.6/Modules/WIX.template.in b/share/cmake-3.6/Modules/WIX.template.in
new file mode 100644
index 0000000..c4fc83a
--- /dev/null
+++ b/share/cmake-3.6/Modules/WIX.template.in
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<?include "cpack_variables.wxi"?>
+
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"
+    RequiredVersion="3.6.3303.0">
+
+    <Product Id="$(var.CPACK_WIX_PRODUCT_GUID)"
+        Name="$(var.CPACK_PACKAGE_NAME)"
+        Language="1033"
+        Version="$(var.CPACK_PACKAGE_VERSION)"
+        Manufacturer="$(var.CPACK_PACKAGE_VENDOR)"
+        UpgradeCode="$(var.CPACK_WIX_UPGRADE_GUID)">
+
+        <Package InstallerVersion="301" Compressed="yes"/>
+
+        <Media Id="1" Cabinet="media1.cab" EmbedCab="yes"/>
+
+        <MajorUpgrade
+            Schedule="afterInstallInitialize"
+            AllowSameVersionUpgrades="yes"
+            DowngradeErrorMessage="A later version of [ProductName] is already installed. Setup will now exit."/>
+
+        <WixVariable Id="WixUILicenseRtf" Value="$(var.CPACK_WIX_LICENSE_RTF)"/>
+        <Property Id="WIXUI_INSTALLDIR" Value="INSTALL_ROOT"/>
+
+        <?ifdef CPACK_WIX_PRODUCT_ICON?>
+        <Property Id="ARPPRODUCTICON">ProductIcon.ico</Property>
+        <Icon Id="ProductIcon.ico" SourceFile="$(var.CPACK_WIX_PRODUCT_ICON)"/>
+        <?endif?>
+
+        <?ifdef CPACK_WIX_UI_BANNER?>
+        <WixVariable Id="WixUIBannerBmp" Value="$(var.CPACK_WIX_UI_BANNER)"/>
+        <?endif?>
+
+        <?ifdef CPACK_WIX_UI_DIALOG?>
+        <WixVariable Id="WixUIDialogBmp" Value="$(var.CPACK_WIX_UI_DIALOG)"/>
+        <?endif?>
+
+        <FeatureRef Id="ProductFeature"/>
+
+        <UIRef Id="$(var.CPACK_WIX_UI_REF)" />
+
+        <?include "properties.wxi"?>
+        <?include "product_fragment.wxi"?>
+    </Product>
+</Wix>
diff --git a/share/cmake-3.2/Modules/WriteBasicConfigVersionFile.cmake b/share/cmake-3.6/Modules/WriteBasicConfigVersionFile.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/WriteBasicConfigVersionFile.cmake
rename to share/cmake-3.6/Modules/WriteBasicConfigVersionFile.cmake
diff --git a/share/cmake-3.6/Modules/WriteCompilerDetectionHeader.cmake b/share/cmake-3.6/Modules/WriteCompilerDetectionHeader.cmake
new file mode 100644
index 0000000..2669a84
--- /dev/null
+++ b/share/cmake-3.6/Modules/WriteCompilerDetectionHeader.cmake
@@ -0,0 +1,665 @@
+#.rst:
+# WriteCompilerDetectionHeader
+# ----------------------------
+#
+# This module provides the function write_compiler_detection_header().
+#
+# The ``WRITE_COMPILER_DETECTION_HEADER`` function can be used to generate
+# a file suitable for preprocessor inclusion which contains macros to be
+# used in source code::
+#
+#    write_compiler_detection_header(
+#              FILE <file>
+#              PREFIX <prefix>
+#              [OUTPUT_FILES_VAR <output_files_var> OUTPUT_DIR <output_dir>]
+#              COMPILERS <compiler> [...]
+#              FEATURES <feature> [...]
+#              [VERSION <version>]
+#              [PROLOG <prolog>]
+#              [EPILOG <epilog>]
+#    )
+#
+# The ``write_compiler_detection_header`` function generates the
+# file ``<file>`` with macros which all have the prefix ``<prefix>``.
+#
+# By default, all content is written directly to the ``<file>``.  The
+# ``OUTPUT_FILES_VAR`` may be specified to cause the compiler-specific
+# content to be written to separate files.  The separate files are then
+# available in the ``<output_files_var>`` and may be consumed by the caller
+# for installation for example.  The ``OUTPUT_DIR`` specifies a relative
+# path from the main ``<file>`` to the compiler-specific files. For example:
+#
+# .. code-block:: cmake
+#
+#    write_compiler_detection_header(
+#      FILE climbingstats_compiler_detection.h
+#      PREFIX ClimbingStats
+#      OUTPUT_FILES_VAR support_files
+#      OUTPUT_DIR compilers
+#      COMPILERS GNU Clang MSVC Intel
+#      FEATURES cxx_variadic_templates
+#    )
+#    install(FILES
+#      ${CMAKE_CURRENT_BINARY_DIR}/climbingstats_compiler_detection.h
+#      DESTINATION include
+#    )
+#    install(FILES
+#      ${support_files}
+#      DESTINATION include/compilers
+#    )
+#
+#
+# ``VERSION`` may be used to specify the API version to be generated.
+# Future versions of CMake may introduce alternative APIs.  A given
+# API is selected by any ``<version>`` value greater than or equal
+# to the version of CMake that introduced the given API and less
+# than the version of CMake that introduced its succeeding API.
+# The value of the :variable:`CMAKE_MINIMUM_REQUIRED_VERSION`
+# variable is used if no explicit version is specified.
+# (As of CMake version |release| there is only one API version.)
+#
+# ``PROLOG`` may be specified as text content to write at the start of the
+# header. ``EPILOG`` may be specified as text content to write at the end
+# of the header
+#
+# At least one ``<compiler>`` and one ``<feature>`` must be listed.  Compilers
+# which are known to CMake, but not specified are detected and a preprocessor
+# ``#error`` is generated for them.  A preprocessor macro matching
+# ``<PREFIX>_COMPILER_IS_<compiler>`` is generated for each compiler
+# known to CMake to contain the value ``0`` or ``1``.
+#
+# Possible compiler identifiers are documented with the
+# :variable:`CMAKE_<LANG>_COMPILER_ID` variable.
+# Available features in this version of CMake are listed in the
+# :prop_gbl:`CMAKE_C_KNOWN_FEATURES` and
+# :prop_gbl:`CMAKE_CXX_KNOWN_FEATURES` global properties.
+#
+# See the :manual:`cmake-compile-features(7)` manual for information on
+# compile features.
+#
+# Feature Test Macros
+# ===================
+#
+# For each compiler, a preprocessor macro is generated matching
+# ``<PREFIX>_COMPILER_IS_<compiler>`` which has the content either ``0``
+# or ``1``, depending on the compiler in use. Preprocessor macros for
+# compiler version components are generated matching
+# ``<PREFIX>_COMPILER_VERSION_MAJOR`` ``<PREFIX>_COMPILER_VERSION_MINOR``
+# and ``<PREFIX>_COMPILER_VERSION_PATCH`` containing decimal values
+# for the corresponding compiler version components, if defined.
+#
+# A preprocessor test is generated based on the compiler version
+# denoting whether each feature is enabled.  A preprocessor macro
+# matching ``<PREFIX>_COMPILER_<FEATURE>``, where ``<FEATURE>`` is the
+# upper-case ``<feature>`` name, is generated to contain the value
+# ``0`` or ``1`` depending on whether the compiler in use supports the
+# feature:
+#
+# .. code-block:: cmake
+#
+#    write_compiler_detection_header(
+#      FILE climbingstats_compiler_detection.h
+#      PREFIX ClimbingStats
+#      COMPILERS GNU Clang AppleClang MSVC Intel
+#      FEATURES cxx_variadic_templates
+#    )
+#
+# .. code-block:: c++
+#
+#    #if ClimbingStats_COMPILER_CXX_VARIADIC_TEMPLATES
+#    template<typename... T>
+#    void someInterface(T t...) { /* ... */ }
+#    #else
+#    // Compatibility versions
+#    template<typename T1>
+#    void someInterface(T1 t1) { /* ... */ }
+#    template<typename T1, typename T2>
+#    void someInterface(T1 t1, T2 t2) { /* ... */ }
+#    template<typename T1, typename T2, typename T3>
+#    void someInterface(T1 t1, T2 t2, T3 t3) { /* ... */ }
+#    #endif
+#
+# Symbol Macros
+# =============
+#
+# Some additional symbol-defines are created for particular features for
+# use as symbols which may be conditionally defined empty:
+#
+# .. code-block:: c++
+#
+#    class MyClass ClimbingStats_FINAL
+#    {
+#        ClimbingStats_CONSTEXPR int someInterface() { return 42; }
+#    };
+#
+# The ``ClimbingStats_FINAL`` macro will expand to ``final`` if the
+# compiler (and its flags) support the ``cxx_final`` feature, and the
+# ``ClimbingStats_CONSTEXPR`` macro will expand to ``constexpr``
+# if ``cxx_constexpr`` is supported.
+#
+# The following features generate corresponding symbol defines:
+#
+# ========================== =================================== =================
+#         Feature                          Define                      Symbol
+# ========================== =================================== =================
+# ``c_restrict``              ``<PREFIX>_RESTRICT``               ``restrict``
+# ``cxx_constexpr``           ``<PREFIX>_CONSTEXPR``              ``constexpr``
+# ``cxx_deleted_functions``   ``<PREFIX>_DELETED_FUNCTION``       ``= delete``
+# ``cxx_extern_templates``    ``<PREFIX>_EXTERN_TEMPLATE``        ``extern``
+# ``cxx_final``               ``<PREFIX>_FINAL``                  ``final``
+# ``cxx_noexcept``            ``<PREFIX>_NOEXCEPT``               ``noexcept``
+# ``cxx_noexcept``            ``<PREFIX>_NOEXCEPT_EXPR(X)``       ``noexcept(X)``
+# ``cxx_override``            ``<PREFIX>_OVERRIDE``               ``override``
+# ========================== =================================== =================
+#
+# Compatibility Implementation Macros
+# ===================================
+#
+# Some features are suitable for wrapping in a macro with a backward
+# compatibility implementation if the compiler does not support the feature.
+#
+# When the ``cxx_static_assert`` feature is not provided by the compiler,
+# a compatibility implementation is available via the
+# ``<PREFIX>_STATIC_ASSERT(COND)`` and
+# ``<PREFIX>_STATIC_ASSERT_MSG(COND, MSG)`` function-like macros. The macros
+# expand to ``static_assert`` where that compiler feature is available, and
+# to a compatibility implementation otherwise. In the first form, the
+# condition is stringified in the message field of ``static_assert``.  In
+# the second form, the message ``MSG`` is passed to the message field of
+# ``static_assert``, or ignored if using the backward compatibility
+# implementation.
+#
+# The ``cxx_attribute_deprecated`` feature provides a macro definition
+# ``<PREFIX>_DEPRECATED``, which expands to either the standard
+# ``[[deprecated]]`` attribute or a compiler-specific decorator such
+# as ``__attribute__((__deprecated__))`` used by GNU compilers.
+#
+# The ``cxx_alignas`` feature provides a macro definition
+# ``<PREFIX>_ALIGNAS`` which expands to either the standard ``alignas``
+# decorator or a compiler-specific decorator such as
+# ``__attribute__ ((__aligned__))`` used by GNU compilers.
+#
+# The ``cxx_alignof`` feature provides a macro definition
+# ``<PREFIX>_ALIGNOF`` which expands to either the standard ``alignof``
+# decorator or a compiler-specific decorator such as ``__alignof__``
+# used by GNU compilers.
+#
+# ============================= ================================ =====================
+#           Feature                          Define                     Symbol
+# ============================= ================================ =====================
+# ``cxx_alignas``                ``<PREFIX>_ALIGNAS``             ``alignas``
+# ``cxx_alignof``                ``<PREFIX>_ALIGNOF``             ``alignof``
+# ``cxx_nullptr``                ``<PREFIX>_NULLPTR``             ``nullptr``
+# ``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT``       ``static_assert``
+# ``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT_MSG``   ``static_assert``
+# ``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED``          ``[[deprecated]]``
+# ``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED_MSG``      ``[[deprecated]]``
+# ``cxx_thread_local``           ``<PREFIX>_THREAD_LOCAL``        ``thread_local``
+# ============================= ================================ =====================
+#
+# A use-case which arises with such deprecation macros is the deprecation
+# of an entire library.  In that case, all public API in the library may
+# be decorated with the ``<PREFIX>_DEPRECATED`` macro.  This results in
+# very noisy build output when building the library itself, so the macro
+# may be may be defined to empty in that case when building the deprecated
+# library:
+#
+# .. code-block:: cmake
+#
+#   add_library(compat_support ${srcs})
+#   target_compile_definitions(compat_support
+#     PRIVATE
+#       CompatSupport_DEPRECATED=
+#   )
+
+#=============================================================================
+# Copyright 2014 Stephen Kelly <steveire@gmail.com>
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
+include(${CMAKE_CURRENT_LIST_DIR}/CMakeCompilerIdDetection.cmake)
+
+function(_load_compiler_variables CompilerId lang)
+  include("${CMAKE_ROOT}/Modules/Compiler/${CompilerId}-${lang}-FeatureTests.cmake" OPTIONAL)
+  set(_cmake_oldestSupported_${CompilerId} ${_cmake_oldestSupported} PARENT_SCOPE)
+  foreach(feature ${ARGN})
+    set(_cmake_feature_test_${CompilerId}_${feature} ${_cmake_feature_test_${feature}} PARENT_SCOPE)
+  endforeach()
+  include("${CMAKE_ROOT}/Modules/Compiler/${CompilerId}-${lang}-DetermineCompiler.cmake" OPTIONAL
+      RESULT_VARIABLE determinedCompiler)
+  if (NOT determinedCompiler)
+    include("${CMAKE_ROOT}/Modules/Compiler/${CompilerId}-DetermineCompiler.cmake" OPTIONAL)
+  endif()
+  set(_compiler_id_version_compute_${CompilerId} ${_compiler_id_version_compute} PARENT_SCOPE)
+endfunction()
+
+function(write_compiler_detection_header
+    file_keyword file_arg
+    prefix_keyword prefix_arg
+    )
+  if (NOT "x${file_keyword}" STREQUAL "xFILE")
+    message(FATAL_ERROR "write_compiler_detection_header: FILE parameter missing.")
+  endif()
+  if (NOT "x${prefix_keyword}" STREQUAL "xPREFIX")
+    message(FATAL_ERROR "write_compiler_detection_header: PREFIX parameter missing.")
+  endif()
+  set(options)
+  set(oneValueArgs VERSION EPILOG PROLOG OUTPUT_FILES_VAR OUTPUT_DIR)
+  set(multiValueArgs COMPILERS FEATURES)
+  cmake_parse_arguments(_WCD "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+  if (NOT _WCD_COMPILERS)
+    message(FATAL_ERROR "Invalid arguments.  write_compiler_detection_header requires at least one compiler.")
+  endif()
+  if (NOT _WCD_FEATURES)
+    message(FATAL_ERROR "Invalid arguments.  write_compiler_detection_header requires at least one feature.")
+  endif()
+
+  if(_WCD_UNPARSED_ARGUMENTS)
+    message(FATAL_ERROR "Unparsed arguments: ${_WCD_UNPARSED_ARGUMENTS}")
+  endif()
+
+  if (prefix_arg STREQUAL "")
+    message(FATAL_ERROR "A prefix must be specified")
+  endif()
+  string(MAKE_C_IDENTIFIER ${prefix_arg} cleaned_prefix)
+  if (NOT prefix_arg STREQUAL cleaned_prefix)
+    message(FATAL_ERROR "The prefix must be a valid C identifier.")
+  endif()
+
+  if(NOT _WCD_VERSION)
+    set(_WCD_VERSION ${CMAKE_MINIMUM_REQUIRED_VERSION})
+  endif()
+  set(_min_version 3.1.0) # Version which introduced this function
+  if (_WCD_VERSION VERSION_LESS _min_version)
+    set(err "VERSION compatibility for write_compiler_detection_header is set to ${_WCD_VERSION}, which is too low.")
+    set(err "${err}  It must be set to at least ${_min_version}.  ")
+    set(err "${err}  Either set the VERSION parameter to the write_compiler_detection_header function, or update")
+    set(err "${err} your minimum required CMake version with the cmake_minimum_required command.")
+    message(FATAL_ERROR "${err}")
+  endif()
+
+  if(_WCD_OUTPUT_FILES_VAR)
+    if(NOT _WCD_OUTPUT_DIR)
+      message(FATAL_ERROR "If OUTPUT_FILES_VAR is specified, then OUTPUT_DIR must also be specified.")
+    endif()
+  endif()
+  if(_WCD_OUTPUT_DIR)
+    if(NOT _WCD_OUTPUT_FILES_VAR)
+      message(FATAL_ERROR "If OUTPUT_DIR is specified, then OUTPUT_FILES_VAR must also be specified.")
+    endif()
+    get_filename_component(main_file_dir ${file_arg} DIRECTORY)
+    if (NOT IS_ABSOLUTE ${main_file_dir})
+      set(main_file_dir "${CMAKE_CURRENT_BINARY_DIR}/${main_file_dir}")
+    endif()
+    if (NOT IS_ABSOLUTE ${_WCD_OUTPUT_DIR})
+      set(_WCD_OUTPUT_DIR "${CMAKE_CURRENT_BINARY_DIR}/${_WCD_OUTPUT_DIR}")
+    endif()
+    get_filename_component(out_file_dir ${_WCD_OUTPUT_DIR} ABSOLUTE)
+    string(FIND ${out_file_dir} ${main_file_dir} idx)
+    if (NOT idx EQUAL 0)
+      message(FATAL_ERROR "The compiler-specific output directory must be within the same directory as the main file.")
+    endif()
+
+    if (main_file_dir STREQUAL out_file_dir)
+      unset(_WCD_OUTPUT_DIR)
+    else()
+      string(REPLACE "${main_file_dir}/" "" _WCD_OUTPUT_DIR "${out_file_dir}/")
+    endif()
+  endif()
+
+  set(compilers
+    GNU
+    Clang
+    AppleClang
+    MSVC
+    SunPro
+    Intel
+  )
+
+  set(_hex_compilers ADSP Borland Embarcadero SunPro)
+
+  foreach(_comp ${_WCD_COMPILERS})
+    list(FIND compilers ${_comp} idx)
+    if (idx EQUAL -1)
+      message(FATAL_ERROR "Unsupported compiler ${_comp}.")
+    endif()
+    if (NOT _need_hex_conversion)
+      list(FIND _hex_compilers ${_comp} idx)
+      if (NOT idx EQUAL -1)
+        set(_need_hex_conversion TRUE)
+      endif()
+    endif()
+  endforeach()
+
+  set(file_content "
+// This is a generated file. Do not edit!
+
+#ifndef ${prefix_arg}_COMPILER_DETECTION_H
+#define ${prefix_arg}_COMPILER_DETECTION_H
+")
+
+  if (_WCD_PROLOG)
+    set(file_content "${file_content}\n${_WCD_PROLOG}\n")
+  endif()
+
+  if (_need_hex_conversion)
+    set(file_content "${file_content}
+#define ${prefix_arg}_DEC(X) (X)
+#define ${prefix_arg}_HEX(X) ( \\
+    ((X)>>28 & 0xF) * 10000000 + \\
+    ((X)>>24 & 0xF) *  1000000 + \\
+    ((X)>>20 & 0xF) *   100000 + \\
+    ((X)>>16 & 0xF) *    10000 + \\
+    ((X)>>12 & 0xF) *     1000 + \\
+    ((X)>>8  & 0xF) *      100 + \\
+    ((X)>>4  & 0xF) *       10 + \\
+    ((X)     & 0xF) \\
+    )\n")
+  endif()
+
+  foreach(feature ${_WCD_FEATURES})
+    if (feature MATCHES "^cxx_")
+      list(APPEND _langs CXX)
+      list(APPEND CXX_features ${feature})
+    elseif (feature MATCHES "^c_")
+      list(APPEND _langs C)
+      list(APPEND C_features ${feature})
+    else()
+      message(FATAL_ERROR "Unsupported feature ${feature}.")
+    endif()
+  endforeach()
+  list(REMOVE_DUPLICATES _langs)
+
+  if(_WCD_OUTPUT_FILES_VAR)
+    get_filename_component(main_file_name ${file_arg} NAME)
+    set(compiler_file_content_
+"#ifndef ${prefix_arg}_COMPILER_DETECTION_H
+#  error This file may only be included from ${main_file_name}
+#endif\n")
+  endif()
+
+  foreach(_lang ${_langs})
+    set(target_compilers)
+    foreach(compiler ${_WCD_COMPILERS})
+      _load_compiler_variables(${compiler} ${_lang} ${${_lang}_features})
+      if(_cmake_oldestSupported_${compiler})
+        list(APPEND target_compilers ${compiler})
+      endif()
+    endforeach()
+
+    get_property(known_features GLOBAL PROPERTY CMAKE_${_lang}_KNOWN_FEATURES)
+    foreach(feature ${${_lang}_features})
+      list(FIND known_features ${feature} idx)
+      if (idx EQUAL -1)
+        message(FATAL_ERROR "Unsupported feature ${feature}.")
+      endif()
+    endforeach()
+
+    if(_lang STREQUAL CXX)
+      set(file_content "${file_content}\n#ifdef __cplusplus\n")
+    else()
+      set(file_content "${file_content}\n#ifndef __cplusplus\n")
+    endif()
+
+    compiler_id_detection(ID_CONTENT ${_lang} PREFIX ${prefix_arg}_
+      ID_DEFINE
+    )
+
+    set(file_content "${file_content}${ID_CONTENT}\n")
+
+    set(pp_if "if")
+    foreach(compiler ${target_compilers})
+      set(file_content "${file_content}\n#  ${pp_if} ${prefix_arg}_COMPILER_IS_${compiler}\n")
+
+      if(_WCD_OUTPUT_FILES_VAR)
+        set(compile_file_name "${_WCD_OUTPUT_DIR}${prefix_arg}_COMPILER_INFO_${compiler}_${_lang}.h")
+        set(file_content "${file_content}\n#    include \"${compile_file_name}\"\n")
+      endif()
+
+      if(_WCD_OUTPUT_FILES_VAR)
+        set(compiler_file_content compiler_file_content_${compiler}_${_lang})
+      else()
+        set(compiler_file_content file_content)
+      endif()
+
+      set(${compiler_file_content} "${${compiler_file_content}}
+#    if !(${_cmake_oldestSupported_${compiler}})
+#      error Unsupported compiler version
+#    endif\n")
+
+      set(PREFIX ${prefix_arg}_)
+      if (_need_hex_conversion)
+        set(MACRO_DEC ${prefix_arg}_DEC)
+        set(MACRO_HEX ${prefix_arg}_HEX)
+      else()
+        set(MACRO_DEC)
+        set(MACRO_HEX)
+      endif()
+      string(CONFIGURE "${_compiler_id_version_compute_${compiler}}" VERSION_BLOCK @ONLY)
+      set(${compiler_file_content} "${${compiler_file_content}}${VERSION_BLOCK}\n")
+      set(PREFIX)
+      set(MACRO_DEC)
+      set(MACRO_HEX)
+
+      set(pp_if "elif")
+      foreach(feature ${${_lang}_features})
+        string(TOUPPER ${feature} feature_upper)
+        set(feature_PP "COMPILER_${feature_upper}")
+        set(_define_item "\n#    define ${prefix_arg}_${feature_PP} 0\n")
+        if (_cmake_feature_test_${compiler}_${feature} STREQUAL "1")
+          set(_define_item "\n#    define ${prefix_arg}_${feature_PP} 1\n")
+        elseif (_cmake_feature_test_${compiler}_${feature})
+          set(_define_item "\n#      define ${prefix_arg}_${feature_PP} 0\n")
+          set(_define_item "\n#    if ${_cmake_feature_test_${compiler}_${feature}}\n#      define ${prefix_arg}_${feature_PP} 1\n#    else${_define_item}#    endif\n")
+        endif()
+        set(${compiler_file_content} "${${compiler_file_content}}${_define_item}")
+      endforeach()
+    endforeach()
+    if(pp_if STREQUAL "elif")
+      set(file_content "${file_content}
+#  else
+#    error Unsupported compiler
+#  endif\n")
+    endif()
+    foreach(feature ${${_lang}_features})
+      string(TOUPPER ${feature} feature_upper)
+      set(feature_PP "COMPILER_${feature_upper}")
+      set(def_name ${prefix_arg}_${feature_PP})
+      if (feature STREQUAL c_restrict)
+        set(def_value "${prefix_arg}_RESTRICT")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} restrict
+#  else
+#    define ${def_value}
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_constexpr)
+        set(def_value "${prefix_arg}_CONSTEXPR")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} constexpr
+#  else
+#    define ${def_value}
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_final)
+        set(def_value "${prefix_arg}_FINAL")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} final
+#  else
+#    define ${def_value}
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_override)
+        set(def_value "${prefix_arg}_OVERRIDE")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} override
+#  else
+#    define ${def_value}
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_static_assert)
+        set(def_value "${prefix_arg}_STATIC_ASSERT(X)")
+        set(def_value_msg "${prefix_arg}_STATIC_ASSERT_MSG(X, MSG)")
+        set(static_assert_struct "template<bool> struct ${prefix_arg}StaticAssert;\ntemplate<> struct ${prefix_arg}StaticAssert<true>{};\n")
+        set(def_standard "#    define ${def_value} static_assert(X, #X)\n#    define ${def_value_msg} static_assert(X, MSG)")
+        set(def_alternative "${static_assert_struct}#    define ${def_value} sizeof(${prefix_arg}StaticAssert<X>)\n#    define ${def_value_msg} sizeof(${prefix_arg}StaticAssert<X>)")
+        set(file_content "${file_content}#  if ${def_name}\n${def_standard}\n#  else\n${def_alternative}\n#  endif\n\n")
+      endif()
+      if (feature STREQUAL cxx_alignas)
+        set(def_value "${prefix_arg}_ALIGNAS(X)")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} alignas(X)
+#  elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang || ${prefix_arg}_COMPILER_IS_AppleClang
+#    define ${def_value} __attribute__ ((__aligned__(X)))
+#  elif ${prefix_arg}_COMPILER_IS_MSVC
+#    define ${def_value} __declspec(align(X))
+#  else
+#    define ${def_value}
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_alignof)
+        set(def_value "${prefix_arg}_ALIGNOF(X)")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} alignof(X)
+#  elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang || ${prefix_arg}_COMPILER_IS_AppleClang
+#    define ${def_value} __alignof__(X)
+#  elif ${prefix_arg}_COMPILER_IS_MSVC
+#    define ${def_value} __alignof(X)
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_deleted_functions)
+        set(def_value "${prefix_arg}_DELETED_FUNCTION")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} = delete
+#  else
+#    define ${def_value}
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_extern_templates)
+        set(def_value "${prefix_arg}_EXTERN_TEMPLATE")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} extern
+#  else
+#    define ${def_value}
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_noexcept)
+        set(def_value "${prefix_arg}_NOEXCEPT")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} noexcept
+#    define ${def_value}_EXPR(X) noexcept(X)
+#  else
+#    define ${def_value}
+#    define ${def_value}_EXPR(X)
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_nullptr)
+        set(def_value "${prefix_arg}_NULLPTR")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} nullptr
+#  else
+#    define ${def_value} 0
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_thread_local)
+        set(def_value "${prefix_arg}_THREAD_LOCAL")
+        set(file_content "${file_content}
+#  if ${def_name}
+#    define ${def_value} thread_local
+#  elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang || ${prefix_arg}_COMPILER_IS_AppleClang
+#    define ${def_value} __thread
+#  elif ${prefix_arg}_COMPILER_IS_MSVC
+#    define ${def_value} __declspec(thread)
+#  else
+// ${def_value} not defined for this configuration.
+#  endif
+\n")
+      endif()
+      if (feature STREQUAL cxx_attribute_deprecated)
+        set(def_name ${prefix_arg}_${feature_PP})
+        set(def_value "${prefix_arg}_DEPRECATED")
+        set(file_content "${file_content}
+#  ifndef ${def_value}
+#    if ${def_name}
+#      define ${def_value} [[deprecated]]
+#      define ${def_value}_MSG(MSG) [[deprecated(MSG)]]
+#    elif ${prefix_arg}_COMPILER_IS_GNU || ${prefix_arg}_COMPILER_IS_Clang
+#      define ${def_value} __attribute__((__deprecated__))
+#      define ${def_value}_MSG(MSG) __attribute__((__deprecated__(MSG)))
+#    elif ${prefix_arg}_COMPILER_IS_MSVC
+#      define ${def_value} __declspec(deprecated)
+#      define ${def_value}_MSG(MSG) __declspec(deprecated(MSG))
+#    else
+#      define ${def_value}
+#      define ${def_value}_MSG(MSG)
+#    endif
+#  endif
+\n")
+      endif()
+    endforeach()
+
+    set(file_content "${file_content}#endif\n")
+
+  endforeach()
+
+  if(_WCD_OUTPUT_FILES_VAR)
+    foreach(compiler ${_WCD_COMPILERS})
+      foreach(_lang ${_langs})
+        if(compiler_file_content_${compiler}_${_lang})
+          set(CMAKE_CONFIGURABLE_FILE_CONTENT "${compiler_file_content_}")
+          set(CMAKE_CONFIGURABLE_FILE_CONTENT "${CMAKE_CONFIGURABLE_FILE_CONTENT}${compiler_file_content_${compiler}_${_lang}}")
+
+          set(compile_file_name "${_WCD_OUTPUT_DIR}${prefix_arg}_COMPILER_INFO_${compiler}_${_lang}.h")
+          set(full_path "${main_file_dir}/${compile_file_name}")
+          list(APPEND ${_WCD_OUTPUT_FILES_VAR} ${full_path})
+          configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
+            "${full_path}"
+            @ONLY
+          )
+        endif()
+      endforeach()
+    endforeach()
+    set(${_WCD_OUTPUT_FILES_VAR} ${${_WCD_OUTPUT_FILES_VAR}} PARENT_SCOPE)
+  endif()
+
+  if (_WCD_EPILOG)
+    set(file_content "${file_content}\n${_WCD_EPILOG}\n")
+  endif()
+  set(file_content "${file_content}\n#endif")
+
+  set(CMAKE_CONFIGURABLE_FILE_CONTENT ${file_content})
+  configure_file("${CMAKE_ROOT}/Modules/CMakeConfigurableFile.in"
+    "${file_arg}"
+    @ONLY
+  )
+endfunction()
diff --git a/share/cmake-3.2/Modules/ecos_clean.cmake b/share/cmake-3.6/Modules/ecos_clean.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/ecos_clean.cmake
rename to share/cmake-3.6/Modules/ecos_clean.cmake
diff --git a/share/cmake-3.6/Modules/exportheader.cmake.in b/share/cmake-3.6/Modules/exportheader.cmake.in
new file mode 100644
index 0000000..7cfbcbd
--- /dev/null
+++ b/share/cmake-3.6/Modules/exportheader.cmake.in
@@ -0,0 +1,42 @@
+
+#ifndef @INCLUDE_GUARD_NAME@
+#define @INCLUDE_GUARD_NAME@
+
+#ifdef @STATIC_DEFINE@
+#  define @EXPORT_MACRO_NAME@
+#  define @NO_EXPORT_MACRO_NAME@
+#else
+#  ifndef @EXPORT_MACRO_NAME@
+#    ifdef @EXPORT_IMPORT_CONDITION@
+        /* We are building this library */
+#      define @EXPORT_MACRO_NAME@ @DEFINE_EXPORT@
+#    else
+        /* We are using this library */
+#      define @EXPORT_MACRO_NAME@ @DEFINE_IMPORT@
+#    endif
+#  endif
+
+#  ifndef @NO_EXPORT_MACRO_NAME@
+#    define @NO_EXPORT_MACRO_NAME@ @DEFINE_NO_EXPORT@
+#  endif
+#endif
+
+#ifndef @DEPRECATED_MACRO_NAME@
+#  define @DEPRECATED_MACRO_NAME@ @DEFINE_DEPRECATED@
+#endif
+
+#ifndef @DEPRECATED_MACRO_NAME@_EXPORT
+#  define @DEPRECATED_MACRO_NAME@_EXPORT @EXPORT_MACRO_NAME@ @DEPRECATED_MACRO_NAME@
+#endif
+
+#ifndef @DEPRECATED_MACRO_NAME@_NO_EXPORT
+#  define @DEPRECATED_MACRO_NAME@_NO_EXPORT @NO_EXPORT_MACRO_NAME@ @DEPRECATED_MACRO_NAME@
+#endif
+
+#if @DEFINE_NO_DEPRECATED@ /* DEFINE_NO_DEPRECATED */
+#  ifndef @NO_DEPRECATED_MACRO_NAME@
+#    define @NO_DEPRECATED_MACRO_NAME@
+#  endif
+#endif
+
+#endif
diff --git a/share/cmake-3.2/Modules/kde3init_dummy.cpp.in b/share/cmake-3.6/Modules/kde3init_dummy.cpp.in
similarity index 100%
rename from share/cmake-3.2/Modules/kde3init_dummy.cpp.in
rename to share/cmake-3.6/Modules/kde3init_dummy.cpp.in
diff --git a/share/cmake-3.2/Modules/kde3uic.cmake b/share/cmake-3.6/Modules/kde3uic.cmake
similarity index 100%
rename from share/cmake-3.2/Modules/kde3uic.cmake
rename to share/cmake-3.6/Modules/kde3uic.cmake
diff --git a/share/cmake-3.6/Modules/readme.txt b/share/cmake-3.6/Modules/readme.txt
new file mode 100644
index 0000000..1e0c13b
--- /dev/null
+++ b/share/cmake-3.6/Modules/readme.txt
@@ -0,0 +1,4 @@
+See the "Find Modules" section of the cmake-developer(7) manual page.
+
+For more information about how to contribute modules to CMake, see this page:
+https://cmake.org/Wiki/CMake:Module_Maintainers
diff --git a/share/cmake-3.6/Templates/AppleInfo.plist b/share/cmake-3.6/Templates/AppleInfo.plist
new file mode 100644
index 0000000..3445e53
--- /dev/null
+++ b/share/cmake-3.6/Templates/AppleInfo.plist
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>CFBundleDevelopmentRegion</key>
+	<string>English</string>
+	<key>CFBundleExecutable</key>
+	<string>${APPLE_GUI_EXECUTABLE}</string>
+	<key>CFBundleGetInfoString</key>
+	<string>${APPLE_GUI_INFO_STRING}</string>
+	<key>CFBundleIconFile</key>
+	<string>${APPLE_GUI_ICON}</string>
+	<key>CFBundleIdentifier</key>
+	<string>${APPLE_GUI_IDENTIFIER}</string>
+	<key>CFBundleInfoDictionaryVersion</key>
+	<string>6.0</string>
+	<key>CFBundleLongVersionString</key>
+	<string>${APPLE_GUI_LONG_VERSION_STRING}</string>
+	<key>CFBundleName</key>
+	<string>${APPLE_GUI_BUNDLE_NAME}</string>
+	<key>CFBundlePackageType</key>
+	<string>APPL</string>
+	<key>CFBundleShortVersionString</key>
+	<string>${APPLE_GUI_SHORT_VERSION_STRING}</string>
+	<key>CFBundleSignature</key>
+	<string>????</string>
+	<key>CFBundleVersion</key>
+	<string>${APPLE_GUI_BUNDLE_VERSION}</string>
+	<key>CSResourcesFileMapped</key>
+	<true/>
+	<key>NSHumanReadableCopyright</key>
+	<string>${APPLE_GUI_COPYRIGHT}</string>
+</dict>
+</plist>
diff --git a/share/cmake-3.2/Templates/CMakeVSMacros1.vsmacros b/share/cmake-3.6/Templates/CMakeVSMacros1.vsmacros
similarity index 100%
rename from share/cmake-3.2/Templates/CMakeVSMacros1.vsmacros
rename to share/cmake-3.6/Templates/CMakeVSMacros1.vsmacros
Binary files differ
diff --git a/share/cmake-3.2/Templates/CMakeVSMacros2.vsmacros b/share/cmake-3.6/Templates/CMakeVSMacros2.vsmacros
similarity index 100%
rename from share/cmake-3.2/Templates/CMakeVSMacros2.vsmacros
rename to share/cmake-3.6/Templates/CMakeVSMacros2.vsmacros
Binary files differ
diff --git a/share/cmake-3.6/Templates/CPack.GenericDescription.txt b/share/cmake-3.6/Templates/CPack.GenericDescription.txt
new file mode 100644
index 0000000..712ee14
--- /dev/null
+++ b/share/cmake-3.6/Templates/CPack.GenericDescription.txt
@@ -0,0 +1,5 @@
+DESCRIPTION
+===========
+
+This is an installer created using CPack (https://cmake.org). No additional installation instructions provided.
+
diff --git a/share/cmake-3.6/Templates/CPack.GenericLicense.txt b/share/cmake-3.6/Templates/CPack.GenericLicense.txt
new file mode 100644
index 0000000..09c6218
--- /dev/null
+++ b/share/cmake-3.6/Templates/CPack.GenericLicense.txt
@@ -0,0 +1,5 @@
+LICENSE
+=======
+
+This is an installer created using CPack (https://cmake.org). No license provided.
+
diff --git a/share/cmake-3.2/Templates/CPack.GenericWelcome.txt b/share/cmake-3.6/Templates/CPack.GenericWelcome.txt
similarity index 100%
rename from share/cmake-3.2/Templates/CPack.GenericWelcome.txt
rename to share/cmake-3.6/Templates/CPack.GenericWelcome.txt
diff --git a/share/cmake-3.2/Templates/CPackConfig.cmake.in b/share/cmake-3.6/Templates/CPackConfig.cmake.in
similarity index 100%
rename from share/cmake-3.2/Templates/CPackConfig.cmake.in
rename to share/cmake-3.6/Templates/CPackConfig.cmake.in
diff --git a/share/cmake-3.2/Templates/CTestScript.cmake.in b/share/cmake-3.6/Templates/CTestScript.cmake.in
similarity index 100%
rename from share/cmake-3.2/Templates/CTestScript.cmake.in
rename to share/cmake-3.6/Templates/CTestScript.cmake.in
diff --git a/share/cmake-3.2/Templates/TestDriver.cxx.in b/share/cmake-3.6/Templates/TestDriver.cxx.in
similarity index 100%
rename from share/cmake-3.2/Templates/TestDriver.cxx.in
rename to share/cmake-3.6/Templates/TestDriver.cxx.in
diff --git a/share/cmake-3.2/Templates/Windows/ApplicationIcon.png b/share/cmake-3.6/Templates/Windows/ApplicationIcon.png
similarity index 100%
rename from share/cmake-3.2/Templates/Windows/ApplicationIcon.png
rename to share/cmake-3.6/Templates/Windows/ApplicationIcon.png
Binary files differ
diff --git a/share/cmake-3.2/Templates/Windows/Logo.png b/share/cmake-3.6/Templates/Windows/Logo.png
similarity index 100%
rename from share/cmake-3.2/Templates/Windows/Logo.png
rename to share/cmake-3.6/Templates/Windows/Logo.png
Binary files differ
diff --git a/share/cmake-3.2/Templates/Windows/SmallLogo.png b/share/cmake-3.6/Templates/Windows/SmallLogo.png
similarity index 100%
rename from share/cmake-3.2/Templates/Windows/SmallLogo.png
rename to share/cmake-3.6/Templates/Windows/SmallLogo.png
Binary files differ
diff --git a/share/cmake-3.6/Templates/Windows/SmallLogo44x44.png b/share/cmake-3.6/Templates/Windows/SmallLogo44x44.png
new file mode 100644
index 0000000..28810b7
--- /dev/null
+++ b/share/cmake-3.6/Templates/Windows/SmallLogo44x44.png
Binary files differ
diff --git a/share/cmake-3.2/Templates/Windows/SplashScreen.png b/share/cmake-3.6/Templates/Windows/SplashScreen.png
similarity index 100%
rename from share/cmake-3.2/Templates/Windows/SplashScreen.png
rename to share/cmake-3.6/Templates/Windows/SplashScreen.png
Binary files differ
diff --git a/share/cmake-3.2/Templates/Windows/StoreLogo.png b/share/cmake-3.6/Templates/Windows/StoreLogo.png
similarity index 100%
rename from share/cmake-3.2/Templates/Windows/StoreLogo.png
rename to share/cmake-3.6/Templates/Windows/StoreLogo.png
Binary files differ
diff --git a/share/cmake-3.2/Templates/Windows/Windows_TemporaryKey.pfx b/share/cmake-3.6/Templates/Windows/Windows_TemporaryKey.pfx
similarity index 100%
rename from share/cmake-3.2/Templates/Windows/Windows_TemporaryKey.pfx
rename to share/cmake-3.6/Templates/Windows/Windows_TemporaryKey.pfx
Binary files differ
diff --git a/share/cmake-3.2/Templates/cygwin-package.sh.in b/share/cmake-3.6/Templates/cygwin-package.sh.in
similarity index 100%
rename from share/cmake-3.2/Templates/cygwin-package.sh.in
rename to share/cmake-3.6/Templates/cygwin-package.sh.in
diff --git a/share/cmake-3.6/completions/cmake b/share/cmake-3.6/completions/cmake
new file mode 100644
index 0000000..6061129
--- /dev/null
+++ b/share/cmake-3.6/completions/cmake
@@ -0,0 +1,163 @@
+# bash completion for cmake(1)                             -*- shell-script -*-
+
+_cmake()
+{
+    local cur prev words cword split=false
+    if type -t _init_completion >/dev/null; then
+        _init_completion -n = || return
+    else
+        # manual initialization for older bash completion versions
+        COMPREPLY=()
+        cur="${COMP_WORDS[COMP_CWORD]}"
+        prev="${COMP_WORDS[COMP_CWORD-1]}"
+    fi
+
+    # Workaround for options like -DCMAKE_BUILD_TYPE=Release
+    local prefix=
+    if [[ $cur == -D* ]]; then
+        prev=-D
+        prefix=-D
+        cur="${cur#-D}"
+    elif [[ $cur == -U* ]]; then
+        prev=-U
+        prefix=-U
+        cur="${cur#-U}"
+    fi
+
+    case "$prev" in
+        -D)
+            if [[ $cur == *=* ]]; then
+            # complete values for variables
+                local var type value
+                var="${cur%%[:=]*}"
+                value="${cur#*=}"
+
+                if [[ $cur == CMAKE_BUILD_TYPE* ]]; then # most widely used case
+                    COMPREPLY=( $( compgen -W 'Debug Release RelWithDebInfo
+                        MinSizeRel' -- "$value" ) )
+                    return
+                fi
+
+                if [[ $cur == *:* ]]; then
+                    type="${cur#*:}"
+                    type="${type%%=*}"
+                else # get type from cache if it's not set explicitly
+                    type=$( cmake -LA -N 2>/dev/null | grep "$var:" \
+                        2>/dev/null )
+                    type="${type#*:}"
+                    type="${type%%=*}"
+                fi
+                case "$type" in
+                    FILEPATH)
+                        cur="$value"
+                        _filedir
+                        return
+                        ;;
+                    PATH)
+                        cur="$value"
+                        _filedir -d
+                        return
+                        ;;
+                    BOOL)
+                        COMPREPLY=( $( compgen -W 'ON OFF TRUE FALSE' -- \
+                            "$value" ) )
+                        return
+                        ;;
+                    STRING|INTERNAL)
+                        # no completion available
+                        return
+                        ;;
+                esac
+            elif [[ $cur == *:* ]]; then
+            # complete types
+                local type="${cur#*:}"
+                COMPREPLY=( $( compgen -W 'FILEPATH PATH STRING BOOL INTERNAL'\
+                    -S = -- "$type" ) )
+                compopt -o nospace
+            else
+            # complete variable names
+                COMPREPLY=( $( compgen -W '$( cmake -LA -N | tail -n +2 |
+                    cut -f1 -d: )' -P "$prefix" -- "$cur" ) )
+                compopt -o nospace
+            fi
+            return
+            ;;
+        -U)
+            COMPREPLY=( $( compgen -W '$( cmake -LA -N | tail -n +2 |
+                cut -f1 -d: )' -P "$prefix" -- "$cur" ) )
+            return
+            ;;
+    esac
+
+    _split_longopt && split=true
+
+    case "$prev" in
+        -C|-P|--graphviz|--system-information)
+            _filedir
+            return
+            ;;
+        --build)
+            _filedir -d
+            return
+            ;;
+        -E)
+            COMPREPLY=( $( compgen -W "$( cmake -E help |& sed -n \
+                '/^  /{s|^  \([^ ]\{1,\}\) .*$|\1|;p}' 2>/dev/null )" \
+                -- "$cur" ) )
+            return
+            ;;
+        -G)
+            local IFS=$'\n'
+            local quoted
+            printf -v quoted %q "$cur"
+            COMPREPLY=( $( compgen -W '$( cmake --help 2>/dev/null | sed -n \
+                -e "1,/^Generators/d" \
+                -e "/^  *[^ =]/{s|^ *\([^=]*[^ =]\).*$|\1|;s| |\\\\ |g;p}" \
+                2>/dev/null )' -- "$quoted" ) )
+            return
+            ;;
+        --help-command)
+            COMPREPLY=( $( compgen -W '$( cmake --help-command-list 2>/dev/null|
+                grep -v "^cmake version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-manual)
+            COMPREPLY=( $( compgen -W '$( cmake --help-manual-list 2>/dev/null|
+                grep -v "^cmake version " | sed -e "s/([0-9])$//" )' -- "$cur" ) )
+            return
+            ;;
+        --help-module)
+            COMPREPLY=( $( compgen -W '$( cmake --help-module-list 2>/dev/null|
+                grep -v "^cmake version " )' -- "$cur" ) )
+            return
+            ;;
+         --help-policy)
+            COMPREPLY=( $( compgen -W '$( cmake --help-policy-list 2>/dev/null |
+                grep -v "^cmake version " )' -- "$cur" ) )
+            return
+            ;;
+         --help-property)
+            COMPREPLY=( $( compgen -W '$( cmake --help-property-list \
+                2>/dev/null | grep -v "^cmake version " )' -- "$cur" ) )
+            return
+            ;;
+         --help-variable)
+            COMPREPLY=( $( compgen -W '$( cmake --help-variable-list \
+                2>/dev/null | grep -v "^cmake version " )' -- "$cur" ) )
+            return
+            ;;
+    esac
+
+    $split && return
+
+    if [[ "$cur" == -* ]]; then
+        COMPREPLY=( $(compgen -W '$( _parse_help "$1" --help )' -- ${cur}) )
+        [[ $COMPREPLY == *= ]] && compopt -o nospace
+        [[ $COMPREPLY ]] && return
+    fi
+
+    _filedir
+} &&
+complete -F _cmake cmake
+
+# ex: ts=4 sw=4 et filetype=sh
diff --git a/share/cmake-3.6/completions/cpack b/share/cmake-3.6/completions/cpack
new file mode 100644
index 0000000..cf5751f
--- /dev/null
+++ b/share/cmake-3.6/completions/cpack
@@ -0,0 +1,88 @@
+# bash completion for cpack(1)                             -*- shell-script -*-
+
+_cpack()
+{
+    local cur prev words cword
+    if type -t _init_completion >/dev/null; then
+        _init_completion -n = || return
+    else
+        # manual initialization for older bash completion versions
+        COMPREPLY=()
+        cur="${COMP_WORDS[COMP_CWORD]}"
+        prev="${COMP_WORDS[COMP_CWORD-1]}"
+    fi
+
+    case "$prev" in
+        -G)
+            COMPREPLY=( $( compgen -W '$( cpack --help 2>/dev/null |
+                sed -e "1,/^Generators/d" -e "s|^ *\([^ ]*\) .*$|\1|" \
+                2>/dev/null )' -- "$cur" ) )
+            return
+            ;;
+        -C)
+            COMPREPLY=( $( compgen -W 'Debug Release RelWithDebInfo
+                MinSizeRel' -- "$cur" ) )
+            return
+            ;;
+        -D)
+            [[ $cur == *=* ]] && return # no completion for values
+            COMPREPLY=( $( compgen -W '$( cpack --help-variable-list \
+                2>/dev/null | grep -v "^cpack version " )' -S = -- "$cur" ) )
+            compopt -o nospace
+            return
+            ;;
+        -P|-R|--vendor)
+            # argument required but no completions available
+            return
+            ;;
+        -B)
+            _filedir -d
+            return
+            ;;
+        --config)
+            _filedir
+            return
+            ;;
+        --help-command)
+            COMPREPLY=( $( compgen -W '$( cpack --help-command-list 2>/dev/null|
+                grep -v "^cpack version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-manual)
+            COMPREPLY=( $( compgen -W '$( cpack --help-manual-list 2>/dev/null|
+                grep -v "^cpack version " | sed -e "s/([0-9])$//" )' -- "$cur" ) )
+            return
+            ;;
+        --help-module)
+            COMPREPLY=( $( compgen -W '$( cpack --help-module-list 2>/dev/null|
+                grep -v "^cpack version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-policy)
+            COMPREPLY=( $( compgen -W '$( cpack --help-policy-list 2>/dev/null |
+                grep -v "^cpack version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-property)
+            COMPREPLY=( $( compgen -W '$( cpack --help-property-list \
+                2>/dev/null | grep -v "^cpack version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-variable)
+            COMPREPLY=( $( compgen -W '$( cpack --help-variable-list \
+                2>/dev/null | grep -v "^cpack version " )' -- "$cur" ) )
+            return
+            ;;
+    esac
+
+    if [[ "$cur" == -* ]]; then
+        COMPREPLY=( $(compgen -W '$( _parse_help "$1" --help )' -- ${cur}) )
+        [[ $COMPREPLY == *= ]] && compopt -o nospace
+        [[ $COMPREPLY ]] && return
+    fi
+
+    _filedir
+} &&
+complete -F _cpack cpack
+
+# ex: ts=4 sw=4 et filetype=sh
diff --git a/share/cmake-3.6/completions/ctest b/share/cmake-3.6/completions/ctest
new file mode 100644
index 0000000..49343bb
--- /dev/null
+++ b/share/cmake-3.6/completions/ctest
@@ -0,0 +1,118 @@
+# bash completion for ctest(1)                             -*- shell-script -*-
+
+_ctest()
+{
+    local cur prev words cword
+    if type -t _init_completion >/dev/null; then
+        _init_completion -n = || return
+    else
+        # manual initialization for older bash completion versions
+        COMPREPLY=()
+        cur="${COMP_WORDS[COMP_CWORD]}"
+        prev="${COMP_WORDS[COMP_CWORD-1]}"
+    fi
+
+    case "$prev" in
+        -C|--build-config)
+            COMPREPLY=( $( compgen -W 'Debug Release RelWithDebInfo
+                MinSizeRel' -- "$cur" ) )
+            return
+            ;;
+        -j|--parallel)
+            COMPREPLY=( $( compgen -W "{1..$(( $(_ncpus)*2 ))}" -- "$cur" ) )
+            return
+            ;;
+        -O|--output-log|-A|--add-notes|--extra-submit)
+            _filedir
+            return
+            ;;
+        -L|--label-regex|-LE|--label-exclude)
+            COMPREPLY=( $( compgen -W '$( ctest --print-labels 2>/dev/null |
+                grep "^  " 2>/dev/null | cut -d" " -f 3 )' -- "$cur" ) )
+            return
+            ;;
+        --track|-I|--tests-information|--max-width|--timeout|--stop-time)
+            # argument required but no completions available
+            return
+            ;;
+        -R|--tests-regex|-E|--exclude-regex)
+            COMPREPLY=( $( compgen -W '$( ctest -N 2>/dev/null |
+                grep "^  Test" 2>/dev/null | cut -d: -f 2 )' -- "$cur" ) )
+            return
+            ;;
+        -D|--dashboard)
+            if [[ $cur == @(Experimental|Nightly|Continuous)* ]]; then
+                local model action
+                action=${cur#@(Experimental|Nightly|Continuous)}
+                model=${cur%"$action"}
+                COMPREPLY=( $( compgen -W 'Start Update Configure Build Test
+                    Coverage Submit MemCheck' -P "$model" -- "$action" ) )
+            else
+                COMPREPLY=( $( compgen -W 'Experimental Nightly Continuous' \
+                -- "$cur" ) )
+                compopt -o nospace
+            fi
+            return
+            ;;
+        -M|--test-model)
+            COMPREPLY=( $( compgen -W 'Experimental Nightly Continuous' -- \
+                "$cur" ) )
+            return
+            ;;
+        -T|--test-action)
+            COMPREPLY=( $( compgen -W 'Start Update Configure Build Test
+                Coverage Submit MemCheck' -- "$cur" ) )
+            return
+            ;;
+        -S|--script|-SP|--script-new-process)
+            _filedir '@(cmake|ctest)'
+            return
+            ;;
+        --interactive-debug-mode)
+            COMPREPLY=( $( compgen -W '0 1' -- "$cur" ) )
+            return
+            ;;
+
+        --help-command)
+            COMPREPLY=( $( compgen -W '$( ctest --help-command-list 2>/dev/null|
+                grep -v "^ctest version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-manual)
+            COMPREPLY=( $( compgen -W '$( ctest --help-manual-list 2>/dev/null|
+                grep -v "^ctest version " | sed -e "s/([0-9])$//" )' -- "$cur" ) )
+            return
+            ;;
+        --help-module)
+            COMPREPLY=( $( compgen -W '$( ctest --help-module-list 2>/dev/null|
+                grep -v "^ctest version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-policy)
+            COMPREPLY=( $( compgen -W '$( ctest --help-policy-list 2>/dev/null |
+                grep -v "^ctest version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-property)
+            COMPREPLY=( $( compgen -W '$( ctest --help-property-list \
+                2>/dev/null | grep -v "^ctest version " )' -- "$cur" ) )
+            return
+            ;;
+        --help-variable)
+            COMPREPLY=( $( compgen -W '$( ctest --help-variable-list \
+                2>/dev/null | grep -v "^ctest version " )' -- "$cur" ) )
+            return
+            ;;
+    esac
+
+    if [[ "$cur" == -* ]]; then
+        COMPREPLY=( $(compgen -W '$( _parse_help "$1" --help )' -- ${cur}) )
+        [[ $COMPREPLY == *= ]] && compopt -o nospace
+        [[ $COMPREPLY ]] && return
+    fi
+
+    _filedir
+} &&
+complete -F _ctest ctest
+
+# ex: ts=4 sw=4 et filetype=sh
diff --git a/share/cmake-3.6/editors/emacs/cmake-mode.el b/share/cmake-3.6/editors/emacs/cmake-mode.el
new file mode 100644
index 0000000..20def8b
--- /dev/null
+++ b/share/cmake-3.6/editors/emacs/cmake-mode.el
@@ -0,0 +1,401 @@
+;;; cmake-mode.el --- major-mode for editing CMake sources
+
+;=============================================================================
+; CMake - Cross Platform Makefile Generator
+; Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
+;
+; Distributed under the OSI-approved BSD License (the "License");
+; see accompanying file Copyright.txt for details.
+;
+; This software is distributed WITHOUT ANY WARRANTY; without even the
+; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+; See the License for more information.
+;=============================================================================
+
+;------------------------------------------------------------------------------
+
+;;; Commentary:
+
+;; Provides syntax highlighting and indentation for CMakeLists.txt and
+;; *.cmake source files.
+;;
+;; Add this code to your .emacs file to use the mode:
+;;
+;;  (setq load-path (cons (expand-file-name "/dir/with/cmake-mode") load-path))
+;;  (require 'cmake-mode)
+
+;------------------------------------------------------------------------------
+
+;;; Code:
+;;
+;; cmake executable variable used to run cmake --help-command
+;; on commands in cmake-mode
+;;
+;; cmake-command-help Written by James Bigler
+;;
+
+(defcustom cmake-mode-cmake-executable "cmake"
+  "*The name of the cmake executable.
+
+This can be either absolute or looked up in $PATH.  You can also
+set the path with these commands:
+ (setenv \"PATH\" (concat (getenv \"PATH\") \";C:\\\\Program Files\\\\CMake 2.8\\\\bin\"))
+ (setenv \"PATH\" (concat (getenv \"PATH\") \":/usr/local/cmake/bin\"))"
+  :type 'file
+  :group 'cmake)
+
+;; Keywords
+(defconst cmake-keywords-block-open '("IF" "MACRO" "FOREACH" "ELSE" "ELSEIF" "WHILE" "FUNCTION"))
+(defconst cmake-keywords-block-close '("ENDIF" "ENDFOREACH" "ENDMACRO" "ELSE" "ELSEIF" "ENDWHILE" "ENDFUNCTION"))
+(defconst cmake-keywords
+  (let ((kwds (append cmake-keywords-block-open cmake-keywords-block-close nil)))
+    (delete-dups kwds)))
+
+;; Regular expressions used by line indentation function.
+;;
+(defconst cmake-regex-blank "^[ \t]*$")
+(defconst cmake-regex-comment "#.*")
+(defconst cmake-regex-paren-left "(")
+(defconst cmake-regex-paren-right ")")
+(defconst cmake-regex-argument-quoted
+  (rx ?\" (* (or (not (any ?\" ?\\)) (and ?\\ anything))) ?\"))
+(defconst cmake-regex-argument-unquoted
+  (rx (or (not (any space "()#\"\\\n")) (and ?\\ nonl))
+      (* (or (not (any space "()#\\\n")) (and ?\\ nonl)))))
+(defconst cmake-regex-token
+  (rx-to-string `(group (or (regexp ,cmake-regex-comment)
+                            ?( ?)
+                            (regexp ,cmake-regex-argument-unquoted)
+                            (regexp ,cmake-regex-argument-quoted)))))
+(defconst cmake-regex-indented
+  (rx-to-string `(and bol (* (group (or (regexp ,cmake-regex-token) (any space ?\n)))))))
+(defconst cmake-regex-block-open
+  (rx-to-string `(and symbol-start (or ,@(append cmake-keywords-block-open
+                                        (mapcar 'downcase cmake-keywords-block-open))) symbol-end)))
+(defconst cmake-regex-block-close
+  (rx-to-string `(and symbol-start (or ,@(append cmake-keywords-block-close
+                                        (mapcar 'downcase cmake-keywords-block-close))) symbol-end)))
+(defconst cmake-regex-close
+  (rx-to-string `(and bol (* space) (regexp ,cmake-regex-block-close)
+                      (* space) (regexp ,cmake-regex-paren-left))))
+
+;------------------------------------------------------------------------------
+
+;; Line indentation helper functions
+
+(defun cmake-line-starts-inside-string ()
+  "Determine whether the beginning of the current line is in a string."
+  (save-excursion
+    (beginning-of-line)
+    (let ((parse-end (point)))
+      (goto-char (point-min))
+      (nth 3 (parse-partial-sexp (point) parse-end))
+      )
+    )
+  )
+
+(defun cmake-find-last-indented-line ()
+  "Move to the beginning of the last line that has meaningful indentation."
+  (let ((point-start (point))
+        region)
+    (forward-line -1)
+    (setq region (buffer-substring-no-properties (point) point-start))
+    (while (and (not (bobp))
+                (or (looking-at cmake-regex-blank)
+                    (cmake-line-starts-inside-string)
+                    (not (and (string-match cmake-regex-indented region)
+                              (= (length region) (match-end 0))))))
+      (forward-line -1)
+      (setq region (buffer-substring-no-properties (point) point-start))
+      )
+    )
+  )
+
+;------------------------------------------------------------------------------
+
+;;
+;; Line indentation function.
+;;
+(defun cmake-indent ()
+  "Indent current line as CMake code."
+  (interactive)
+  (unless (cmake-line-starts-inside-string)
+    (if (bobp)
+        (cmake-indent-line-to 0)
+      (let (cur-indent)
+        (save-excursion
+          (beginning-of-line)
+          (let ((point-start (point))
+                (case-fold-search t)  ;; case-insensitive
+                token)
+            ; Search back for the last indented line.
+            (cmake-find-last-indented-line)
+            ; Start with the indentation on this line.
+            (setq cur-indent (current-indentation))
+            ; Search forward counting tokens that adjust indentation.
+            (while (re-search-forward cmake-regex-token point-start t)
+              (setq token (match-string 0))
+              (when (or (string-match (concat "^" cmake-regex-paren-left "$") token)
+                        (and (string-match cmake-regex-block-open token)
+                             (looking-at (concat "[ \t]*" cmake-regex-paren-left))))
+                (setq cur-indent (+ cur-indent cmake-tab-width)))
+              (when (string-match (concat "^" cmake-regex-paren-right "$") token)
+                (setq cur-indent (- cur-indent cmake-tab-width)))
+              )
+            (goto-char point-start)
+            ;; If next token closes the block, decrease indentation
+            (when (looking-at cmake-regex-close)
+              (setq cur-indent (- cur-indent cmake-tab-width))
+              )
+            )
+          )
+        ; Indent this line by the amount selected.
+        (cmake-indent-line-to (max cur-indent 0))
+        )
+      )
+    )
+  )
+
+(defun cmake-point-in-indendation ()
+  (string-match "^[ \\t]*$" (buffer-substring (point-at-bol) (point))))
+
+(defun cmake-indent-line-to (column)
+  "Indent the current line to COLUMN.
+If point is within the existing indentation it is moved to the end of
+the indentation.  Otherwise it retains the same position on the line"
+  (if (cmake-point-in-indendation)
+      (indent-line-to column)
+    (save-excursion (indent-line-to column))))
+
+;------------------------------------------------------------------------------
+
+;;
+;; Helper functions for buffer
+;;
+(defun cmake-unscreamify-buffer ()
+  "Convert all CMake commands to lowercase in buffer."
+  (interactive)
+  (save-excursion
+    (goto-char (point-min))
+    (while (re-search-forward "^\\([ \t]*\\)\\_<\\(\\(?:\\w\\|\\s_\\)+\\)\\_>\\([ \t]*(\\)" nil t)
+      (replace-match
+       (concat
+        (match-string 1)
+        (downcase (match-string 2))
+        (match-string 3))
+       t))
+    )
+  )
+
+;------------------------------------------------------------------------------
+
+;;
+;; Keyword highlighting regex-to-face map.
+;;
+(defconst cmake-font-lock-keywords
+  `((,(rx-to-string `(and symbol-start
+                          (or ,@cmake-keywords
+                              ,@(mapcar #'downcase cmake-keywords))
+                          symbol-end))
+     . font-lock-keyword-face)
+    (,(rx symbol-start (group (+ (or word (syntax symbol)))) (* blank) ?\()
+     1 font-lock-function-name-face)
+    (,(rx "${" (group (+(any alnum "-_+/."))) "}")
+     1 font-lock-variable-name-face t)
+    )
+  "Highlighting expressions for CMake mode.")
+
+;------------------------------------------------------------------------------
+
+;; Syntax table for this mode.
+(defvar cmake-mode-syntax-table nil
+  "Syntax table for CMake mode.")
+(or cmake-mode-syntax-table
+    (setq cmake-mode-syntax-table
+          (let ((table (make-syntax-table)))
+            (modify-syntax-entry ?\(  "()" table)
+            (modify-syntax-entry ?\)  ")(" table)
+            (modify-syntax-entry ?# "<" table)
+            (modify-syntax-entry ?\n ">" table)
+            (modify-syntax-entry ?$ "'" table)
+            table)))
+
+;;
+;; User hook entry point.
+;;
+(defvar cmake-mode-hook nil)
+
+;;
+;; Indentation increment.
+;;
+(defcustom cmake-tab-width 2
+  "Number of columns to indent cmake blocks"
+  :type 'integer)
+
+;------------------------------------------------------------------------------
+
+;; For compatibility with Emacs < 24
+(defalias 'cmake--parent-mode
+  (if (fboundp 'prog-mode) 'prog-mode 'fundamental-mode))
+
+;;------------------------------------------------------------------------------
+;; Mode definition.
+;;
+;;;###autoload
+(define-derived-mode cmake-mode cmake--parent-mode "CMake"
+  "Major mode for editing CMake source files."
+
+  ; Setup font-lock mode.
+  (set (make-local-variable 'font-lock-defaults) '(cmake-font-lock-keywords))
+  ; Setup indentation function.
+  (set (make-local-variable 'indent-line-function) 'cmake-indent)
+  ; Setup comment syntax.
+  (set (make-local-variable 'comment-start) "#"))
+
+; Help mode starts here
+
+
+;;;###autoload
+(defun cmake-command-run (type &optional topic buffer)
+  "Runs the command cmake with the arguments specified.  The
+optional argument topic will be appended to the argument list."
+  (interactive "s")
+  (let* ((bufname (if buffer buffer (concat "*CMake" type (if topic "-") topic "*")))
+         (buffer  (if (get-buffer bufname) (get-buffer bufname) (generate-new-buffer bufname)))
+         (command (concat cmake-mode-cmake-executable " " type " " topic))
+         ;; Turn of resizing of mini-windows for shell-command.
+         (resize-mini-windows nil)
+         )
+    (shell-command command buffer)
+    (save-selected-window
+      (select-window (display-buffer buffer 'not-this-window))
+      (cmake-mode)
+      (toggle-read-only t))
+    )
+  )
+
+;;;###autoload
+(defun cmake-help-list-commands ()
+  "Prints out a list of the cmake commands."
+  (interactive)
+  (cmake-command-run "--help-command-list")
+  )
+
+(defvar cmake-commands '() "List of available topics for --help-command.")
+(defvar cmake-help-command-history nil "Command read history.")
+(defvar cmake-modules '() "List of available topics for --help-module.")
+(defvar cmake-help-module-history nil "Module read history.")
+(defvar cmake-variables '() "List of available topics for --help-variable.")
+(defvar cmake-help-variable-history nil "Variable read history.")
+(defvar cmake-properties '() "List of available topics for --help-property.")
+(defvar cmake-help-property-history nil "Property read history.")
+(defvar cmake-help-complete-history nil "Complete help read history.")
+(defvar cmake-string-to-list-symbol
+  '(("command" cmake-commands cmake-help-command-history)
+    ("module" cmake-modules cmake-help-module-history)
+    ("variable"  cmake-variables cmake-help-variable-history)
+    ("property" cmake-properties cmake-help-property-history)
+    ))
+
+(defun cmake-get-list (listname)
+  "If the value of LISTVAR is nil, run cmake --help-LISTNAME-list
+and store the result as a list in LISTVAR."
+  (let ((listvar (car (cdr (assoc listname cmake-string-to-list-symbol)))))
+    (if (not (symbol-value listvar))
+        (let ((temp-buffer-name "*CMake Temporary*"))
+          (save-window-excursion
+            (cmake-command-run (concat "--help-" listname "-list") nil temp-buffer-name)
+            (with-current-buffer temp-buffer-name
+              ; FIXME: Ignore first line if it is "cmake version ..." from CMake < 3.0.
+              (set listvar (split-string (buffer-substring-no-properties (point-min) (point-max)) "\n" t)))))
+      (symbol-value listvar)
+      ))
+  )
+
+(require 'thingatpt)
+(defun cmake-symbol-at-point ()
+  (let ((symbol (symbol-at-point)))
+    (and (not (null symbol))
+         (symbol-name symbol))))
+
+(defun cmake-help-type (type)
+  (let* ((default-entry (cmake-symbol-at-point))
+         (history (car (cdr (cdr (assoc type cmake-string-to-list-symbol)))))
+         (input (completing-read
+                 (format "CMake %s: " type) ; prompt
+                 (cmake-get-list type) ; completions
+                 nil ; predicate
+                 t   ; require-match
+                 default-entry ; initial-input
+                 history
+                 )))
+    (if (string= input "")
+        (error "No argument given")
+      input))
+  )
+
+;;;###autoload
+(defun cmake-help-command ()
+  "Prints out the help message for the command the cursor is on."
+  (interactive)
+  (cmake-command-run "--help-command" (cmake-help-type "command") "*CMake Help*"))
+
+;;;###autoload
+(defun cmake-help-module ()
+  "Prints out the help message for the module the cursor is on."
+  (interactive)
+  (cmake-command-run "--help-module" (cmake-help-type "module") "*CMake Help*"))
+
+;;;###autoload
+(defun cmake-help-variable ()
+  "Prints out the help message for the variable the cursor is on."
+  (interactive)
+  (cmake-command-run "--help-variable" (cmake-help-type "variable") "*CMake Help*"))
+
+;;;###autoload
+(defun cmake-help-property ()
+  "Prints out the help message for the property the cursor is on."
+  (interactive)
+  (cmake-command-run "--help-property" (cmake-help-type "property") "*CMake Help*"))
+
+;;;###autoload
+(defun cmake-help ()
+  "Queries for any of the four available help topics and prints out the approriate page."
+  (interactive)
+  (let* ((default-entry (cmake-symbol-at-point))
+         (command-list (cmake-get-list "command"))
+         (variable-list (cmake-get-list "variable"))
+         (module-list (cmake-get-list "module"))
+         (property-list (cmake-get-list "property"))
+         (all-words (append command-list variable-list module-list property-list))
+         (input (completing-read
+                 "CMake command/module/variable/property: " ; prompt
+                 all-words ; completions
+                 nil ; predicate
+                 t   ; require-match
+                 default-entry ; initial-input
+                 'cmake-help-complete-history
+                 )))
+    (if (string= input "")
+        (error "No argument given")
+      (if (member input command-list)
+          (cmake-command-run "--help-command" input "*CMake Help*")
+        (if (member input variable-list)
+            (cmake-command-run "--help-variable" input "*CMake Help*")
+          (if (member input module-list)
+              (cmake-command-run "--help-module" input "*CMake Help*")
+            (if (member input property-list)
+                (cmake-command-run "--help-property" input "*CMake Help*")
+              (error "Not a know help topic.") ; this really should not happen
+              ))))))
+  )
+
+;;;###autoload
+(progn
+  (add-to-list 'auto-mode-alist '("CMakeLists\\.txt\\'" . cmake-mode))
+  (add-to-list 'auto-mode-alist '("\\.cmake\\'" . cmake-mode)))
+
+; This file provides cmake-mode.
+(provide 'cmake-mode)
+
+;;; cmake-mode.el ends here
diff --git a/share/cmake-3.2/editors/vim/cmake-help.vim b/share/cmake-3.6/editors/vim/cmake-help.vim
similarity index 100%
rename from share/cmake-3.2/editors/vim/cmake-help.vim
rename to share/cmake-3.6/editors/vim/cmake-help.vim
diff --git a/share/cmake-3.6/editors/vim/cmake-indent.vim b/share/cmake-3.6/editors/vim/cmake-indent.vim
new file mode 100644
index 0000000..fa088e4
--- /dev/null
+++ b/share/cmake-3.6/editors/vim/cmake-indent.vim
@@ -0,0 +1,93 @@
+" =============================================================================
+"
+"   Program:   CMake - Cross-Platform Makefile Generator
+"   Module:    $RCSfile$
+"   Language:  VIM
+"   Date:      $Date$
+"   Version:   $Revision$
+"
+" =============================================================================
+
+" Vim indent file
+" Language:     CMake (ft=cmake)
+" Author:       Andy Cedilnik <andy.cedilnik@kitware.com>
+" Maintainer:   Karthik Krishnan <karthik.krishnan@kitware.com>
+" Last Change:  $Date$
+" Version:      $Revision$
+"
+" Licence:      The CMake license applies to this file. See
+"               https://cmake.org/licensing
+"               This implies that distribution with Vim is allowed
+
+if exists("b:did_indent")
+  finish
+endif
+let b:did_indent = 1
+
+setlocal indentexpr=CMakeGetIndent(v:lnum)
+setlocal indentkeys+==ENDIF(,ENDFOREACH(,ENDMACRO(,ELSE(,ELSEIF(,ENDWHILE(
+
+" Only define the function once.
+if exists("*CMakeGetIndent")
+  finish
+endif
+
+fun! CMakeGetIndent(lnum)
+  let this_line = getline(a:lnum)
+
+  " Find a non-blank line above the current line.
+  let lnum = a:lnum
+  let lnum = prevnonblank(lnum - 1)
+  let previous_line = getline(lnum)
+
+  " Hit the start of the file, use zero indent.
+  if lnum == 0
+    return 0
+  endif
+
+  let ind = indent(lnum)
+
+  let or = '\|'
+  " Regular expressions used by line indentation function.
+  let cmake_regex_comment = '#.*'
+  let cmake_regex_identifier = '[A-Za-z][A-Za-z0-9_]*'
+  let cmake_regex_quoted = '"\([^"\\]\|\\.\)*"'
+  let cmake_regex_arguments = '\(' . cmake_regex_quoted .
+                    \       or . '\$(' . cmake_regex_identifier . ')' .
+                    \       or . '[^()\\#"]' . or . '\\.' . '\)*'
+
+  let cmake_indent_comment_line = '^\s*' . cmake_regex_comment
+  let cmake_indent_blank_regex = '^\s*$'
+  let cmake_indent_open_regex = '^\s*' . cmake_regex_identifier .
+                    \           '\s*(' . cmake_regex_arguments .
+                    \           '\(' . cmake_regex_comment . '\)\?$'
+
+  let cmake_indent_close_regex = '^' . cmake_regex_arguments .
+                    \            ')\s*' .
+                    \            '\(' . cmake_regex_comment . '\)\?$'
+
+  let cmake_indent_begin_regex = '^\s*\(IF\|MACRO\|FOREACH\|ELSE\|ELSEIF\|WHILE\|FUNCTION\)\s*('
+  let cmake_indent_end_regex = '^\s*\(ENDIF\|ENDFOREACH\|ENDMACRO\|ELSE\|ELSEIF\|ENDWHILE\|ENDFUNCTION\)\s*('
+
+  " Add
+  if previous_line =~? cmake_indent_comment_line " Handle comments
+    let ind = ind
+  else
+    if previous_line =~? cmake_indent_begin_regex
+      let ind = ind + &sw
+    endif
+    if previous_line =~? cmake_indent_open_regex
+      let ind = ind + &sw
+    endif
+  endif
+
+  " Subtract
+  if this_line =~? cmake_indent_end_regex
+    let ind = ind - &sw
+  endif
+  if previous_line =~? cmake_indent_close_regex
+    let ind = ind - &sw
+  endif
+
+  return ind
+endfun
diff --git a/share/cmake-3.6/editors/vim/cmake-syntax.vim b/share/cmake-3.6/editors/vim/cmake-syntax.vim
new file mode 100644
index 0000000..624a8c4
--- /dev/null
+++ b/share/cmake-3.6/editors/vim/cmake-syntax.vim
@@ -0,0 +1,89 @@
+" =============================================================================
+"
+"   Program:   CMake - Cross-Platform Makefile Generator
+"   Module:    $RCSfile$
+"   Language:  VIM
+"   Date:      $Date$
+"   Version:   $Revision$
+"
+" =============================================================================
+
+" Vim syntax file
+" Language:     CMake
+" Author:       Andy Cedilnik <andy.cedilnik@kitware.com>
+" Maintainer:   Karthik Krishnan <karthik.krishnan@kitware.com>
+" Last Change:  $Date$
+" Version:      $Revision$
+"
+" Licence:      The CMake license applies to this file. See
+"               https://cmake.org/licensing
+"               This implies that distribution with Vim is allowed
+
+" For version 5.x: Clear all syntax items
+" For version 6.x: Quit when a syntax file was already loaded
+if version < 600
+  syntax clear
+elseif exists("b:current_syntax")
+  finish
+endif
+
+syn case ignore
+syn match cmakeEscaped /\(\\\\\|\\"\|\\n\|\\t\)/ contained
+syn region cmakeComment start="#" end="$" contains=cmakeTodo
+syn region cmakeRegistry start=/\[/ end=/]/
+            \ contained oneline contains=CONTAINED,cmakeTodo,cmakeEscaped
+syn region cmakeVariableValue start=/\${/ end=/}/
+            \ contained oneline contains=CONTAINED,cmakeTodo
+syn region cmakeEnvironment start=/\$ENV{/ end=/}/
+            \ contained oneline contains=CONTAINED,cmakeTodo
+syn region cmakeString start=/"/ end=/"/
+            \ contains=CONTAINED,cmakeTodo,cmakeOperators
+syn region cmakeArguments start=/(/ end=/)/
+            \ contains=ALLBUT,cmakeArguments,cmakeTodo
+syn keyword cmakeSystemVariables
+            \ WIN32 UNIX APPLE CYGWIN BORLAND MINGW MSVC MSVC_IDE MSVC60 MSVC70 MSVC71 MSVC80 MSVC90
+syn keyword cmakeOperators
+            \ ABSOLUTE AND BOOL CACHE COMMAND DEFINED DOC EQUAL EXISTS EXT FALSE GREATER INTERNAL LESS MATCHES NAME NAMES NAME_WE NOT OFF ON OR PATH PATHS PROGRAM STREQUAL STRGREATER STRING STRLESS TRUE
+            \ contained
+syn keyword cmakeDeprecated ABSTRACT_FILES BUILD_NAME SOURCE_FILES SOURCE_FILES_REMOVE VTK_MAKE_INSTANTIATOR VTK_WRAP_JAVA VTK_WRAP_PYTHON VTK_WRAP_TCL WRAP_EXCLUDE_FILES
+           \ nextgroup=cmakeArguments
+
+" The keywords are generated as:  cmake --help-command-list | tr "\n" " " | tr "[:lower:]" "[:upper:]"
+syn keyword cmakeStatement
+            \ ADD_COMPILE_OPTIONS ADD_CUSTOM_COMMAND ADD_CUSTOM_TARGET ADD_DEFINITIONS ADD_DEPENDENCIES ADD_EXECUTABLE ADD_LIBRARY ADD_SUBDIRECTORY ADD_TEST AUX_SOURCE_DIRECTORY BREAK BUILD_COMMAND BUILD_NAME CMAKE_HOST_SYSTEM_INFORMATION CMAKE_MINIMUM_REQUIRED CMAKE_POLICY CONFIGURE_FILE CREATE_TEST_SOURCELIST CTEST_BUILD CTEST_CONFIGURE CTEST_COVERAGE CTEST_EMPTY_BINARY_DIRECTORY CTEST_MEMCHECK CTEST_READ_CUSTOM_FILES CTEST_RUN_SCRIPT CTEST_SLEEP CTEST_START CTEST_SUBMIT CTEST_TEST CTEST_UPDATE CTEST_UPLOAD DEFINE_PROPERTY ELSE ELSEIF ENABLE_LANGUAGE ENABLE_TESTING ENDFOREACH ENDFUNCTION ENDIF ENDMACRO ENDWHILE EXEC_PROGRAM EXECUTE_PROCESS EXPORT EXPORT_LIBRARY_DEPENDENCIES FILE FIND_FILE FIND_LIBRARY FIND_PACKAGE FIND_PATH FIND_PROGRAM FLTK_WRAP_UI FOREACH FUNCTION GET_CMAKE_PROPERTY GET_DIRECTORY_PROPERTY GET_FILENAME_COMPONENT GET_PROPERTY GET_SOURCE_FILE_PROPERTY GET_TARGET_PROPERTY GET_TEST_PROPERTY IF INCLUDE INCLUDE_DIRECTORIES INCLUDE_EXTERNAL_MSPROJECT INCLUDE_REGULAR_EXPRESSION INSTALL INSTALL_FILES INSTALL_PROGRAMS INSTALL_TARGETS LINK_DIRECTORIES LINK_LIBRARIES LIST LOAD_CACHE LOAD_COMMAND MACRO MAKE_DIRECTORY MARK_AS_ADVANCED MATH MESSAGE OPTION OUTPUT_REQUIRED_FILES PROJECT QT_WRAP_CPP QT_WRAP_UI REMOVE REMOVE_DEFINITIONS RETURN SEPARATE_ARGUMENTS SET SET_DIRECTORY_PROPERTIES SET_PROPERTY SET_SOURCE_FILES_PROPERTIES SET_TARGET_PROPERTIES SET_TESTS_PROPERTIES SITE_NAME SOURCE_GROUP STRING SUBDIR_DEPENDS SUBDIRS TARGET_COMPILE_DEFINITIONS TARGET_COMPILE_FEATURES TARGET_COMPILE_OPTIONS TARGET_INCLUDE_DIRECTORIES TARGET_LINK_LIBRARIES TARGET_SOURCES TRY_COMPILE TRY_RUN UNSET USE_MANGLED_MESA UTILITY_SOURCE VARIABLE_REQUIRES VARIABLE_WATCH WHILE WRITE_FILE
+            \ nextgroup=cmakeArguments
+syn keyword cmakeTodo
+            \ TODO FIXME XXX
+            \ contained
+
+" Define the default highlighting.
+" For version 5.7 and earlier: only when not done already
+" For version 5.8 and later: only when an item doesn't have highlighting yet
+if version >= 508 || !exists("did_cmake_syntax_inits")
+  if version < 508
+    let did_cmake_syntax_inits = 1
+    command -nargs=+ HiLink hi link <args>
+  else
+    command -nargs=+ HiLink hi def link <args>
+  endif
+
+  HiLink cmakeStatement Statement
+  HiLink cmakeComment Comment
+  HiLink cmakeString String
+  HiLink cmakeVariableValue Type
+  HiLink cmakeRegistry Underlined
+  HiLink cmakeArguments Identifier
+  HiLink cmakeArgument Constant
+  HiLink cmakeEnvironment Special
+  HiLink cmakeOperators Operator
+  HiLink cmakeMacro PreProc
+  HiLink cmakeError Error
+  HiLink cmakeTodo TODO
+  HiLink cmakeEscaped Special
+
+  delcommand HiLink
+endif
+
+let b:current_syntax = "cmake"
+
+"EOF"
diff --git a/share/cmake-3.6/include/cmCPluginAPI.h b/share/cmake-3.6/include/cmCPluginAPI.h
new file mode 100644
index 0000000..4d9a9a7
--- /dev/null
+++ b/share/cmake-3.6/include/cmCPluginAPI.h
@@ -0,0 +1,234 @@
+/*============================================================================
+  CMake - Cross Platform Makefile Generator
+  Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
+
+  Distributed under the OSI-approved BSD License (the "License");
+  see accompanying file Copyright.txt for details.
+
+  This software is distributed WITHOUT ANY WARRANTY; without even the
+  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the License for more information.
+============================================================================*/
+/* This header file defines the API that loadable commands can use. In many
+   of these commands C++ instances of cmMakefile of cmSourceFile are passed
+   in as arguments or returned. In these cases they are passed as a void *
+   argument. In the function prototypes mf is used to represent a makefile
+   and sf is used to represent a source file. The functions are grouped
+   loosely into four groups 1) Utility 2) cmMakefile 3) cmSourceFile 4)
+   cmSystemTools. Within each grouping functions are listed alphabetically */
+/*=========================================================================*/
+#ifndef cmCPluginAPI_h
+#define cmCPluginAPI_h
+
+#define CMAKE_VERSION_MAJOR 2
+#define CMAKE_VERSION_MINOR 5
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __WATCOMC__
+#define CCONV __cdecl
+#else
+#define CCONV
+#endif
+/*=========================================================================
+this is the structure of function entry points that a plugin may call. This
+structure must be kept in sync with the static decaled at the bottom of
+cmCPLuginAPI.cxx
+=========================================================================*/
+typedef struct
+{
+  /*=========================================================================
+  Here we define the set of functions that a plugin may call. The first goup
+  of functions are utility functions that are specific to the plugin API
+  =========================================================================*/
+  /* set/Get the ClientData in the cmLoadedCommandInfo structure, this is how
+     information is passed from the InitialPass to FInalPass for commands
+     that need a FinalPass and need information from the InitialPass */
+  void*(CCONV* GetClientData)(void* info);
+  /* return the summed size in characters of all the arguments */
+  int(CCONV* GetTotalArgumentSize)(int argc, char** argv);
+  /* free all the memory associated with an argc, argv pair */
+  void(CCONV* FreeArguments)(int argc, char** argv);
+  /* set/Get the ClientData in the cmLoadedCommandInfo structure, this is how
+     information is passed from the InitialPass to FInalPass for commands
+     that need a FinalPass and need information from the InitialPass */
+  void(CCONV* SetClientData)(void* info, void* cd);
+  /* when an error occurs, call this function to set the error string */
+  void(CCONV* SetError)(void* info, const char* err);
+
+  /*=========================================================================
+  The following functions all directly map to methods in the cmMakefile
+  class. See cmMakefile.h for descriptions of what each method does. All of
+  these methods take the void * makefile pointer as their first argument.
+  =========================================================================*/
+  void(CCONV* AddCacheDefinition)(void* mf, const char* name,
+                                  const char* value, const char* doc,
+                                  int cachetype);
+  void(CCONV* AddCustomCommand)(void* mf, const char* source,
+                                const char* command, int numArgs,
+                                const char** args, int numDepends,
+                                const char** depends, int numOutputs,
+                                const char** outputs, const char* target);
+  void(CCONV* AddDefineFlag)(void* mf, const char* definition);
+  void(CCONV* AddDefinition)(void* mf, const char* name, const char* value);
+  void(CCONV* AddExecutable)(void* mf, const char* exename, int numSrcs,
+                             const char** srcs, int win32);
+  void(CCONV* AddLibrary)(void* mf, const char* libname, int shared,
+                          int numSrcs, const char** srcs);
+  void(CCONV* AddLinkDirectoryForTarget)(void* mf, const char* tgt,
+                                         const char* d);
+  void(CCONV* AddLinkLibraryForTarget)(void* mf, const char* tgt,
+                                       const char* libname, int libtype);
+  void(CCONV* AddUtilityCommand)(void* mf, const char* utilityName,
+                                 const char* command, const char* arguments,
+                                 int all, int numDepends, const char** depends,
+                                 int numOutputs, const char** outputs);
+  int(CCONV* CommandExists)(void* mf, const char* name);
+  int(CCONV* ExecuteCommand)(void* mf, const char* name, int numArgs,
+                             const char** args);
+  void(CCONV* ExpandSourceListArguments)(void* mf, int argc, const char** argv,
+                                         int* resArgc, char*** resArgv,
+                                         unsigned int startArgumentIndex);
+  char*(CCONV* ExpandVariablesInString)(void* mf, const char* source,
+                                        int escapeQuotes, int atOnly);
+  unsigned int(CCONV* GetCacheMajorVersion)(void* mf);
+  unsigned int(CCONV* GetCacheMinorVersion)(void* mf);
+  const char*(CCONV* GetCurrentDirectory)(void* mf);
+  const char*(CCONV* GetCurrentOutputDirectory)(void* mf);
+  const char*(CCONV* GetDefinition)(void* mf, const char* def);
+  const char*(CCONV* GetHomeDirectory)(void* mf);
+  const char*(CCONV* GetHomeOutputDirectory)(void* mf);
+  unsigned int(CCONV* GetMajorVersion)(void* mf);
+  unsigned int(CCONV* GetMinorVersion)(void* mf);
+  const char*(CCONV* GetProjectName)(void* mf);
+  const char*(CCONV* GetStartDirectory)(void* mf);
+  const char*(CCONV* GetStartOutputDirectory)(void* mf);
+  int(CCONV* IsOn)(void* mf, const char* name);
+
+  /*=========================================================================
+  The following functions are designed to operate or manipulate
+  cmSourceFiles. Please see cmSourceFile.h for additional information on many
+  of these methods. Some of these methods are in cmMakefile.h.
+  =========================================================================*/
+  void*(CCONV* AddSource)(void* mf, void* sf);
+  void*(CCONV* CreateSourceFile)();
+  void(CCONV* DestroySourceFile)(void* sf);
+  void*(CCONV* GetSource)(void* mf, const char* sourceName);
+  void(CCONV* SourceFileAddDepend)(void* sf, const char* depend);
+  const char*(CCONV* SourceFileGetProperty)(void* sf, const char* prop);
+  int(CCONV* SourceFileGetPropertyAsBool)(void* sf, const char* prop);
+  const char*(CCONV* SourceFileGetSourceName)(void* sf);
+  const char*(CCONV* SourceFileGetFullPath)(void* sf);
+  void(CCONV* SourceFileSetName)(void* sf, const char* name, const char* dir,
+                                 int numSourceExtensions,
+                                 const char** sourceExtensions,
+                                 int numHeaderExtensions,
+                                 const char** headerExtensions);
+  void(CCONV* SourceFileSetName2)(void* sf, const char* name, const char* dir,
+                                  const char* ext, int headerFileOnly);
+  void(CCONV* SourceFileSetProperty)(void* sf, const char* prop,
+                                     const char* value);
+
+  /*=========================================================================
+  The following methods are from cmSystemTools.h see that file for specific
+  documentation on each method.
+  =========================================================================*/
+  char*(CCONV* Capitalized)(const char*);
+  void(CCONV* CopyFileIfDifferent)(const char* f1, const char* f2);
+  char*(CCONV* GetFilenameWithoutExtension)(const char*);
+  char*(CCONV* GetFilenamePath)(const char*);
+  void(CCONV* RemoveFile)(const char* f1);
+  void(CCONV* Free)(void*);
+
+  /*=========================================================================
+    The following are new functions added after 1.6
+  =========================================================================*/
+  void(CCONV* AddCustomCommandToOutput)(void* mf, const char* output,
+                                        const char* command, int numArgs,
+                                        const char** args,
+                                        const char* main_dependency,
+                                        int numDepends, const char** depends);
+  void(CCONV* AddCustomCommandToTarget)(void* mf, const char* target,
+                                        const char* command, int numArgs,
+                                        const char** args, int commandType);
+
+  /* display status information */
+  void(CCONV* DisplaySatus)(void* info, const char* message);
+
+  /* new functions added after 2.4 */
+  void*(CCONV* CreateNewSourceFile)(void* mf);
+  void(CCONV* DefineSourceFileProperty)(void* mf, const char* name,
+                                        const char* briefDocs,
+                                        const char* longDocs, int chained);
+
+  /* this is the end of the C function stub API structure */
+} cmCAPI;
+
+/*=========================================================================
+CM_PLUGIN_EXPORT should be used by plugins
+=========================================================================*/
+#ifdef _WIN32
+#define CM_PLUGIN_EXPORT __declspec(dllexport)
+#else
+#define CM_PLUGIN_EXPORT
+#endif
+
+/*=========================================================================
+define the different types of cache entries, see cmCacheManager.h for more
+information
+=========================================================================*/
+#define CM_CACHE_BOOL 0
+#define CM_CACHE_PATH 1
+#define CM_CACHE_FILEPATH 2
+#define CM_CACHE_STRING 3
+#define CM_CACHE_INTERNAL 4
+#define CM_CACHE_STATIC 5
+
+/*=========================================================================
+define the different types of compiles a library may be
+=========================================================================*/
+#define CM_LIBRARY_GENERAL 0
+#define CM_LIBRARY_DEBUG 1
+#define CM_LIBRARY_OPTIMIZED 2
+
+/*=========================================================================
+define the different types of custom commands for a target
+=========================================================================*/
+#define CM_PRE_BUILD 0
+#define CM_PRE_LINK 1
+#define CM_POST_BUILD 2
+
+/*=========================================================================
+Finally we define the key data structures and function prototypes
+=========================================================================*/
+typedef const char*(CCONV* CM_DOC_FUNCTION)();
+typedef int(CCONV* CM_INITIAL_PASS_FUNCTION)(void* info, void* mf, int argc,
+                                             char* []);
+typedef void(CCONV* CM_FINAL_PASS_FUNCTION)(void* info, void* mf);
+typedef void(CCONV* CM_DESTRUCTOR_FUNCTION)(void* info);
+
+typedef struct
+{
+  unsigned long reserved1; /* Reserved for future use.  DO NOT USE.  */
+  unsigned long reserved2; /* Reserved for future use.  DO NOT USE.  */
+  cmCAPI* CAPI;
+  int m_Inherited; /* this ivar is no longer used in CMake 2.2 or later */
+  CM_INITIAL_PASS_FUNCTION InitialPass;
+  CM_FINAL_PASS_FUNCTION FinalPass;
+  CM_DESTRUCTOR_FUNCTION Destructor;
+  CM_DOC_FUNCTION GetTerseDocumentation;
+  CM_DOC_FUNCTION GetFullDocumentation;
+  const char* Name;
+  char* Error;
+  void* ClientData;
+} cmLoadedCommandInfo;
+
+typedef void(CCONV* CM_INIT_FUNCTION)(cmLoadedCommandInfo*);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/source.properties b/source.properties
new file mode 100644
index 0000000..0186318
--- /dev/null
+++ b/source.properties
@@ -0,0 +1,3 @@
+Pkg.Revision=3.6.3043163
+Pkg.Desc=CMake 3.6
+Pkg.Path=cmake;3.6