blob: f03d59e83efc70a1ad724bd386053a970f4381fd [file] [log] [blame]
/*
SDL - Simple DirectMedia Layer
Copyright (C) 1997-2004 Sam Lantinga
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with this library; if not, write to the Free
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Sam Lantinga
slouken@libsdl.org
*/
#ifdef SAVE_RCSID
static char rcsid =
"@(#) $Id: SDL_audio.h,v 1.9 2004/08/20 18:57:01 slouken Exp $";
#endif
/* Access to the raw audio mixing buffer for the SDL library */
#ifndef _SDL_audio_h
#define _SDL_audio_h
#include <stdio.h>
#include "SDL_main.h"
#include "SDL_types.h"
#include "SDL_error.h"
#include "SDL_rwops.h"
#include "SDL_byteorder.h"
#include "begin_code.h"
/* Set up for C function definitions, even when using C++ */
#ifdef __cplusplus
extern "C" {
#endif
/* The calculated values in this structure are calculated by SDL_OpenAudio() */
typedef struct SDL_AudioSpec {
int freq; /* DSP frequency -- samples per second */
Uint16 format; /* Audio data format */
Uint8 channels; /* Number of channels: 1 mono, 2 stereo */
Uint8 silence; /* Audio buffer silence value (calculated) */
Uint16 samples; /* Audio buffer size in samples (power of 2) */
Uint16 padding; /* Necessary for some compile environments */
Uint32 size; /* Audio buffer size in bytes (calculated) */
/* This function is called when the audio device needs more data.
'stream' is a pointer to the audio data buffer
'len' is the length of that buffer in bytes.
Once the callback returns, the buffer will no longer be valid.
Stereo samples are stored in a LRLRLR ordering.
*/
void (SDLCALL *callback)(void *userdata, Uint8 *stream, int len);
void *userdata;
} SDL_AudioSpec;
/* Audio format flags (defaults to LSB byte order) */
#define AUDIO_U8 0x0008 /* Unsigned 8-bit samples */
#define AUDIO_S8 0x8008 /* Signed 8-bit samples */
#define AUDIO_U16LSB 0x0010 /* Unsigned 16-bit samples */
#define AUDIO_S16LSB 0x8010 /* Signed 16-bit samples */
#define AUDIO_U16MSB 0x1010 /* As above, but big-endian byte order */
#define AUDIO_S16MSB 0x9010 /* As above, but big-endian byte order */
#define AUDIO_U16 AUDIO_U16LSB
#define AUDIO_S16 AUDIO_S16LSB
/* Native audio byte ordering */
#if SDL_BYTEORDER == SDL_LIL_ENDIAN
#define AUDIO_U16SYS AUDIO_U16LSB
#define AUDIO_S16SYS AUDIO_S16LSB
#else
#define AUDIO_U16SYS AUDIO_U16MSB
#define AUDIO_S16SYS AUDIO_S16MSB
#endif
/* A structure to hold a set of audio conversion filters and buffers */
typedef struct SDL_AudioCVT {
int needed; /* Set to 1 if conversion possible */
Uint16 src_format; /* Source audio format */
Uint16 dst_format; /* Target audio format */
double rate_incr; /* Rate conversion increment */
Uint8 *buf; /* Buffer to hold entire audio data */
int len; /* Length of original audio buffer */
int len_cvt; /* Length of converted audio buffer */
int len_mult; /* buffer must be len*len_mult big */
double len_ratio; /* Given len, final size is len*len_ratio */
void (SDLCALL *filters[10])(struct SDL_AudioCVT *cvt, Uint16 format);
int filter_index; /* Current audio conversion function */
} SDL_AudioCVT;
/* Function prototypes */
/* These functions are used internally, and should not be used unless you
* have a specific need to specify the audio driver you want to use.
* You should normally use SDL_Init() or SDL_InitSubSystem().
*/
extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name);
extern DECLSPEC void SDLCALL SDL_AudioQuit(void);
/* This function fills the given character buffer with the name of the
* current audio driver, and returns a pointer to it if the audio driver has
* been initialized. It returns NULL if no driver has been initialized.
*/
extern DECLSPEC char * SDLCALL SDL_AudioDriverName(char *namebuf, int maxlen);
/*
* This function opens the audio device with the desired parameters, and
* returns 0 if successful, placing the actual hardware parameters in the
* structure pointed to by 'obtained'. If 'obtained' is NULL, the audio
* data passed to the callback function will be guaranteed to be in the
* requested format, and will be automatically converted to the hardware
* audio format if necessary. This function returns -1 if it failed
* to open the audio device, or couldn't set up the audio thread.
*
* When filling in the desired audio spec structure,
* 'desired->freq' should be the desired audio frequency in samples-per-second.
* 'desired->format' should be the desired audio format.
* 'desired->samples' is the desired size of the audio buffer, in samples.
* This number should be a power of two, and may be adjusted by the audio
* driver to a value more suitable for the hardware. Good values seem to
* range between 512 and 8096 inclusive, depending on the application and
* CPU speed. Smaller values yield faster response time, but can lead
* to underflow if the application is doing heavy processing and cannot
* fill the audio buffer in time. A stereo sample consists of both right
* and left channels in LR ordering.
* Note that the number of samples is directly related to time by the
* following formula: ms = (samples*1000)/freq
* 'desired->size' is the size in bytes of the audio buffer, and is
* calculated by SDL_OpenAudio().
* 'desired->silence' is the value used to set the buffer to silence,
* and is calculated by SDL_OpenAudio().
* 'desired->callback' should be set to a function that will be called
* when the audio device is ready for more data. It is passed a pointer
* to the audio buffer, and the length in bytes of the audio buffer.
* This function usually runs in a separate thread, and so you should
* protect data structures that it accesses by calling SDL_LockAudio()
* and SDL_UnlockAudio() in your code.
* 'desired->userdata' is passed as the first parameter to your callback
* function.
*
* The audio device starts out playing silence when it's opened, and should
* be enabled for playing by calling SDL_PauseAudio(0) when you are ready
* for your audio callback function to be called. Since the audio driver
* may modify the requested size of the audio buffer, you should allocate
* any local mixing buffers after you open the audio device.
*/
extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec *desired, SDL_AudioSpec *obtained);
/*
* Get the current audio state:
*/
typedef enum {
SDL_AUDIO_STOPPED = 0,
SDL_AUDIO_PLAYING,
SDL_AUDIO_PAUSED
} SDL_audiostatus;
extern DECLSPEC SDL_audiostatus SDLCALL SDL_GetAudioStatus(void);
/*
* This function pauses and unpauses the audio callback processing.
* It should be called with a parameter of 0 after opening the audio
* device to start playing sound. This is so you can safely initialize
* data for your callback function after opening the audio device.
* Silence will be written to the audio device during the pause.
*/
extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on);
/*
* This function loads a WAVE from the data source, automatically freeing
* that source if 'freesrc' is non-zero. For example, to load a WAVE file,
* you could do:
* SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, ...);
*
* If this function succeeds, it returns the given SDL_AudioSpec,
* filled with the audio data format of the wave data, and sets
* 'audio_buf' to a malloc()'d buffer containing the audio data,
* and sets 'audio_len' to the length of that audio buffer, in bytes.
* You need to free the audio buffer with SDL_FreeWAV() when you are
* done with it.
*
* This function returns NULL and sets the SDL error message if the
* wave file cannot be opened, uses an unknown data format, or is
* corrupt. Currently raw and MS-ADPCM WAVE files are supported.
*/
extern DECLSPEC SDL_AudioSpec * SDLCALL SDL_LoadWAV_RW(SDL_RWops *src, int freesrc, SDL_AudioSpec *spec, Uint8 **audio_buf, Uint32 *audio_len);
/* Compatibility convenience function -- loads a WAV from a file */
#define SDL_LoadWAV(file, spec, audio_buf, audio_len) \
SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len)
/*
* This function frees data previously allocated with SDL_LoadWAV_RW()
*/
extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 *audio_buf);
/*
* This function takes a source format and rate and a destination format
* and rate, and initializes the 'cvt' structure with information needed
* by SDL_ConvertAudio() to convert a buffer of audio data from one format
* to the other.
* This function returns 0, or -1 if there was an error.
*/
extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT *cvt,
Uint16 src_format, Uint8 src_channels, int src_rate,
Uint16 dst_format, Uint8 dst_channels, int dst_rate);
/* Once you have initialized the 'cvt' structure using SDL_BuildAudioCVT(),
* created an audio buffer cvt->buf, and filled it with cvt->len bytes of
* audio data in the source format, this function will convert it in-place
* to the desired format.
* The data conversion may expand the size of the audio data, so the buffer
* cvt->buf should be allocated after the cvt structure is initialized by
* SDL_BuildAudioCVT(), and should be cvt->len*cvt->len_mult bytes long.
*/
extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT *cvt);
/*
* This takes two audio buffers of the playing audio format and mixes
* them, performing addition, volume adjustment, and overflow clipping.
* The volume ranges from 0 - 128, and should be set to SDL_MIX_MAXVOLUME
* for full audio volume. Note this does not change hardware volume.
* This is provided for convenience -- you can mix your own audio data.
*/
#define SDL_MIX_MAXVOLUME 128
extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 *dst, const Uint8 *src, Uint32 len, int volume);
/*
* The lock manipulated by these functions protects the callback function.
* During a LockAudio/UnlockAudio pair, you can be guaranteed that the
* callback function is not running. Do not call these from the callback
* function or you will cause deadlock.
*/
extern DECLSPEC void SDLCALL SDL_LockAudio(void);
extern DECLSPEC void SDLCALL SDL_UnlockAudio(void);
/*
* This function shuts down audio processing and closes the audio device.
*/
extern DECLSPEC void SDLCALL SDL_CloseAudio(void);
/* Ends C function definitions when using C++ */
#ifdef __cplusplus
}
#endif
#include "close_code.h"
#endif /* _SDL_audio_h */