blob: 3ce112de11a6c69a370236740b9b4007ffa1ab48 [file] [log] [blame]
/*
* DrvMain.c
*
* Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Texas Instruments nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** \file DrvMain.c
* \brief The DrvMain module. Handles driver init, stop and recovery processes.
*
* \see DrvMain.h
*/
#define __FILE_ID__ FILE_ID_49
#include "tidef.h"
#include "osApi.h"
#include "report.h"
#include "context.h"
#include "timer.h"
#include "CmdHndlr.h"
#include "DrvMain.h"
#include "scrApi.h"
#include "EvHandler.h"
#include "connApi.h"
#include "siteMgrApi.h"
#include "sme.h"
#include "SoftGeminiApi.h"
#include "roamingMngrApi.h"
#include "qosMngr_API.h"
#include "TrafficMonitor.h"
#include "PowerMgr_API.h"
#include "EvHandler.h"
#include "apConn.h"
#include "currBss.h"
#include "SwitchChannelApi.h"
#include "ScanCncn.h"
#include "healthMonitor.h"
#include "scanMngrApi.h"
#include "regulatoryDomainApi.h"
#include "measurementMgrApi.h"
#ifdef XCC_MODULE_INCLUDED
#include "XCCMngr.h"
#endif
#include "TxnQueue.h"
#include "TWDriver.h"
#include "debug.h"
#include "host_platform.h"
#include "StaCap.h"
#include "WlanDrvCommon.h"
#include "DrvMainModules.h"
#include "CmdDispatcher.h"
#define SM_WATCHDOG_TIME_MS 20000 /* SM processes timeout is 20 sec. */
#define SDIO_CONNECT_THRESHOLD 8
/* This is used to prevent endless recovery loops */
#define MAX_NUM_OF_RECOVERY_TRIGGERS 5
/* Handle failure status from the SM callbacks by triggering the SM with FAILURE event */
#define HANDLE_CALLBACKS_FAILURE_STATUS(hDrvMain, eStatus) \
if (eStatus != TI_OK) { drvMain_SmEvent (hDrvMain, SM_EVENT_FAILURE); return; }
/* The DrvMain SM states */
typedef enum
{
/* 0 */ SM_STATE_IDLE,
/* 1 */ SM_STATE_WAIT_INI_FILE,
/* 2 */ SM_STATE_WAIT_NVS_FILE,
/* 3 */ SM_STATE_HW_INIT,
/* 4 */ SM_STATE_DOWNLOAD_FW_FILE,
/* 5 */ SM_STATE_WAIT_FW_FILE,
/* 6 */ SM_STATE_FW_INIT,
/* 7 */ SM_STATE_FW_CONFIG,
/* 8 */ SM_STATE_OPERATIONAL,
/* 9 */ SM_STATE_DISCONNECTING,
/* 10 */ SM_STATE_STOPPING,
/* 11 */ SM_STATE_STOPPED,
/* 12 */ SM_STATE_STOPPING_ON_FAIL,
/* 13 */ SM_STATE_FAILED
} ESmState;
/* The DrvMain SM events */
typedef enum
{
/* 0 */ SM_EVENT_START,
/* 1 */ SM_EVENT_INI_FILE_READY,
/* 2 */ SM_EVENT_NVS_FILE_READY,
/* 3 */ SM_EVENT_HW_INIT_COMPLETE,
/* 4 */ SM_EVENT_FW_FILE_READY,
/* 5 */ SM_EVENT_FW_INIT_COMPLETE,
/* 6 */ SM_EVENT_FW_CONFIG_COMPLETE,
/* 7 */ SM_EVENT_STOP,
/* 8 */ SM_EVENT_RECOVERY,
/* 9 */ SM_EVENT_DISCONNECTED,
/* 10 */ SM_EVENT_STOP_COMPLETE,
/* 11 */ SM_EVENT_FAILURE
} ESmEvent;
/* The module's object */
typedef struct
{
TStadHandlesList tStadHandles; /* All STAD modules handles (distributed in driver init process) */
TI_BOOL bRecovery; /* Indicates if we are during recovery process */
TI_UINT32 uNumOfRecoveryAttempts; /* Indicates if we are during recovery process */
ESmState eSmState; /* The DrvMain SM state. */
ESmEvent ePendingEvent;/* A pending event issued when the SM is busy */
TI_UINT32 uPendingEventsCount; /* Counts the number of events pending for SM execution */
TFileInfo tFileInfo; /* Information of last file retrieved by os_GetFile() */
TI_UINT32 uContextId; /* ID allocated to this module on registration to context module */
EActionType eAction; /* The last action (start/stop) inserted to the driver */
void *hSignalObj; /* The signal object used for waiting for action completion */
TBusDrvCfg tBusDrvCfg; /* A union (struc per each supported bus type) for the bus driver configuration */
TI_UINT32 uRxDmaBufLen; /* The bus driver Rx DMA buffer length (needed as a limit for Rx aggregation length) */
TI_UINT32 uTxDmaBufLen; /* The bus driver Tx DMA buffer length (needed as a limit for Tx aggregation length) */
} TDrvMain;
static void drvMain_Init (TI_HANDLE hDrvMain);
static void drvMain_InitHwCb (TI_HANDLE hDrvMain, TI_STATUS eStatus);
static void drvMain_InitFwCb (TI_HANDLE hDrvMain, TI_STATUS eStatus);
static void drvMain_ConfigFwCb (TI_HANDLE hDrvMain, TI_STATUS eStatus);
static void drvMain_TwdStopCb (TI_HANDLE hDrvMain, TI_STATUS eStatus);
static void drvMain_InitFailCb (TI_HANDLE hDrvMain, TI_STATUS eStatus);
static void drvMain_InitLocals (TDrvMain *pDrvMain);
/* static void drvMain_SmWatchdogTimeout (TI_HANDLE hDrvMain); */
static void drvMain_SmEvent (TI_HANDLE hDrvMain, ESmEvent eEvent);
static void drvMain_Sm (TI_HANDLE hDrvMain, ESmEvent eEvent);
/* External functions prototypes */
/** \brief WLAN Driver I/F Get file
*
* \param hOs - OS module object handle
* \param pFileInfo - Pointer to output file information
* \return TI_OK on success or TI_NOK on failure
*
* \par Description
* This function provides access to a requested init file:
* It provides the requested file information and call the requester callback.
* Note that in Linux the files were previously loaded to driver memory by the loader
*
* \sa
*/
extern int wlanDrvIf_GetFile (TI_HANDLE hOs, TFileInfo *pFileInfo);
/** \brief WLAN Driver I/F Update Driver State
*
* \param hOs - OS module object handle
* \param eDriverState - New Driver State
* \return void
*
* \par Description
* This function Update the driver state (Idle | Running | Stopped |Failed):
*
* \sa
*/
extern void wlanDrvIf_UpdateDriverState (TI_HANDLE hOs, EDriverSteadyState eDriverState);
/** \brief WLAN Driver I/F Set MAC Address
*
* \param hOs - OS module object handle
* \param pMacAddr - Pointer to MAC address to set
* \return void
*
* \par Description
* This function Update the driver MAC address by copy it to the network interface structure
*
* \sa
*/
extern void wlanDrvIf_SetMacAddress (TI_HANDLE hOs, TI_UINT8 *pMacAddr);
/** \brief OS Init Table INI File
*
* \param hOs - OS module object handle
* \param InitTable - Pointer to initialization table
* \param file_buf - Pointer to Input buffer from INI file
* \param file_length - Length of input buffer from INI file
* \return void
*
* \par Description
* This function perform Initializing of init table accrding to data from INI file and driver defaults
*
* \sa
*/
extern int osInitTable_IniFile (TI_HANDLE hOs, TInitTable *InitTable, char *file_buf, int file_length);
/*
* \fn drvMain_Create
* \brief Create the driver modules
*
* Create all STAD and TWD modules.
* Then call all modules init functions which initializes their handles and variables.
*
* \note
* \param hOs - Handle to the Os Abstraction Layer
* \param pDrvMainHndl - Pointer for returning the DrvMain handle.
* \param pCmdHndlr - Pointer for returning the CmdHndlr handle.
* \param pContext - Pointer for returning the Context handle.
* \param pTxDataQ - Pointer for returning the TxDataQ handle.
* \param pTxMgmtQ - Pointer for returning the TxMgmtQ handle.
* \param pTxCtrl - Pointer for returning the TxCtrl handle.
* \param pTwd - Pointer for returning the TWD handle.
* \param pEvHandler - Pointer for returning the EvHndler handle.
* \return Handle to the DrvMain module (NULL if failed)
* \sa
*/
TI_STATUS drvMain_Create (TI_HANDLE hOs,
TI_HANDLE *pDrvMainHndl,
TI_HANDLE *pCmdHndlr,
TI_HANDLE *pContext,
TI_HANDLE *pTxDataQ,
TI_HANDLE *pTxMgmtQ,
TI_HANDLE *pTxCtrl,
TI_HANDLE *pTwd,
TI_HANDLE *pEvHandler,
TI_HANDLE *pCmdDispatch,
TI_HANDLE *pReport)
{
/* Create the DrvMain module object. */
TDrvMain *pDrvMain = (TDrvMain *) os_memoryAlloc (hOs, sizeof(TDrvMain));
if (pDrvMain == NULL)
{
return TI_NOK;
}
os_memoryZero (hOs, (void *)pDrvMain, sizeof(TDrvMain));
pDrvMain->tStadHandles.hDrvMain = (TI_HANDLE)pDrvMain;
pDrvMain->tStadHandles.hOs = hOs;
/*
* Create all driver modules
* =========================
*/
pDrvMain->tStadHandles.hContext = context_Create (hOs);
if (pDrvMain->tStadHandles.hContext == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTimer = tmr_Create (hOs);
if (pDrvMain->tStadHandles.hTimer == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hSCR = scr_create (hOs);
if (pDrvMain->tStadHandles.hSCR == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTxnQ = txnQ_Create (hOs);
if (pDrvMain->tStadHandles.hTxnQ == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hEvHandler = EvHandler_Create (hOs);
if (pDrvMain->tStadHandles.hEvHandler == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hReport = report_Create (hOs);
if (pDrvMain->tStadHandles.hReport == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hConn = conn_create (hOs);
if (pDrvMain->tStadHandles.hConn == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hScanCncn = scanCncn_Create (hOs);
if (pDrvMain->tStadHandles.hScanCncn == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hSme = sme_Create (hOs);
if (pDrvMain->tStadHandles.hSme == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hSiteMgr = siteMgr_create (hOs);
if (pDrvMain->tStadHandles.hSiteMgr == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hMlmeSm = mlme_create (hOs);
if (pDrvMain->tStadHandles.hMlmeSm == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hAuth = auth_create (hOs);
if (pDrvMain->tStadHandles.hAuth == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hAssoc = assoc_create (hOs);
if (pDrvMain->tStadHandles.hAssoc == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hRxData = rxData_create (hOs);
if (pDrvMain->tStadHandles.hRxData == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTxCtrl = txCtrl_Create (hOs);
if (pDrvMain->tStadHandles.hTxCtrl == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTxDataQ = txDataQ_Create(hOs);
if (pDrvMain->tStadHandles.hTxDataQ == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTxMgmtQ = txMgmtQ_Create(hOs);
if (pDrvMain->tStadHandles.hTxMgmtQ == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTxPort = txPort_create (hOs);
if (pDrvMain->tStadHandles.hTxPort == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hCtrlData = ctrlData_create (hOs);
if (pDrvMain->tStadHandles.hCtrlData == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTrafficMon = TrafficMonitor_create (hOs);
if (pDrvMain->tStadHandles.hTrafficMon == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hRsn = rsn_create (hOs);
if (pDrvMain->tStadHandles.hRsn == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hRegulatoryDomain = regulatoryDomain_create (hOs);
if (pDrvMain->tStadHandles.hRegulatoryDomain == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hMeasurementMgr = measurementMgr_create (hOs);
if (pDrvMain->tStadHandles.hMeasurementMgr == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hSoftGemini = SoftGemini_create (hOs);
if (pDrvMain->tStadHandles.hSoftGemini == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
#ifdef XCC_MODULE_INCLUDED
pDrvMain->tStadHandles.hXCCMngr = XCCMngr_create (hOs);
if (pDrvMain->tStadHandles.hXCCMngr == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
#else
pDrvMain->tStadHandles.hXCCMngr = NULL;
#endif
pDrvMain->tStadHandles.hRoamingMngr = roamingMngr_create (hOs);
if (pDrvMain->tStadHandles.hRoamingMngr == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hAPConnection = apConn_create (hOs);
if (pDrvMain->tStadHandles.hAPConnection == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hCurrBss = currBSS_create (hOs);
if (pDrvMain->tStadHandles.hCurrBss == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hQosMngr = qosMngr_create (hOs);
if (pDrvMain->tStadHandles.hQosMngr == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hPowerMgr = PowerMgr_create (hOs);
if (pDrvMain->tStadHandles.hPowerMgr == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hSwitchChannel = switchChannel_create (hOs);
if (pDrvMain->tStadHandles.hSwitchChannel == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hScanMngr = scanMngr_create (hOs);
if (NULL == pDrvMain->tStadHandles.hScanMngr)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hHealthMonitor = healthMonitor_create (hOs);
if (NULL == pDrvMain->tStadHandles.hHealthMonitor)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hTWD = TWD_Create (hOs);
if (pDrvMain->tStadHandles.hTWD == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hCmdHndlr = cmdHndlr_Create (hOs, pDrvMain->tStadHandles.hEvHandler);
if (pDrvMain->tStadHandles.hCmdHndlr == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hCmdDispatch = cmdDispatch_Create (hOs);
if (pDrvMain->tStadHandles.hCmdDispatch == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
pDrvMain->tStadHandles.hStaCap = StaCap_Create (hOs);
if (pDrvMain->tStadHandles.hStaCap == NULL)
{
drvMain_Destroy (pDrvMain);
return TI_NOK;
}
/* Bind all modules handles */
drvMain_Init ((TI_HANDLE)pDrvMain);
/* Provide required handles to the OAL */
*pDrvMainHndl = (TI_HANDLE)pDrvMain;
*pCmdHndlr = pDrvMain->tStadHandles.hCmdHndlr;
*pContext = pDrvMain->tStadHandles.hContext;
*pTxDataQ = pDrvMain->tStadHandles.hTxDataQ;
*pTxMgmtQ = pDrvMain->tStadHandles.hTxMgmtQ;
*pTxCtrl = pDrvMain->tStadHandles.hTxCtrl;
*pTwd = pDrvMain->tStadHandles.hTWD;
*pEvHandler = pDrvMain->tStadHandles.hEvHandler;
*pReport = pDrvMain->tStadHandles.hReport;
*pCmdDispatch = pDrvMain->tStadHandles.hCmdDispatch;
WLAN_INIT_REPORT (("drvMain_Create: success\n"));
return TI_OK;
}
/*
* \fn drvMain_Destroy
* \brief Destroy driver
*
* Destroy all STAD and TWD modules and resources.
*
* \note
* \param hDrvMain - The DrvMain object
* \return TI_OK if succeeded, TI_NOK if failed.
* \sa drvMain_Create
*/
TI_STATUS drvMain_Destroy (TI_HANDLE hDrvMain)
{
TDrvMain *pDrvMain = (TDrvMain *)hDrvMain;
hPlatform_Wlan_Hardware_DeInit ();
if (pDrvMain == NULL)
{
return TI_NOK;
}
if (pDrvMain->tStadHandles.hScanMngr != NULL)
{
scanMngr_unload (pDrvMain->tStadHandles.hScanMngr);
}
if (pDrvMain->tStadHandles.hSiteMgr != NULL)
{
siteMgr_unLoad (pDrvMain->tStadHandles.hSiteMgr);
}
if (pDrvMain->tStadHandles.hSme != NULL)
{
sme_Destroy (pDrvMain->tStadHandles.hSme);
}
if (pDrvMain->tStadHandles.hConn != NULL)
{
conn_unLoad (pDrvMain->tStadHandles.hConn);
}
if (pDrvMain->tStadHandles.hTWD != NULL)
{
TWD_Destroy (pDrvMain->tStadHandles.hTWD);
}
if (pDrvMain->tStadHandles.hScanCncn != NULL)
{
scanCncn_Destroy (pDrvMain->tStadHandles.hScanCncn);
}
if (pDrvMain->tStadHandles.hTrafficMon != NULL)
{
TrafficMonitor_Destroy (pDrvMain->tStadHandles.hTrafficMon);
}
if (pDrvMain->tStadHandles.hCtrlData != NULL)
{
ctrlData_unLoad (pDrvMain->tStadHandles.hCtrlData);
}
if (pDrvMain->tStadHandles.hTxCtrl != NULL)
{
txCtrl_Unload (pDrvMain->tStadHandles.hTxCtrl);
}
if (pDrvMain->tStadHandles.hTxDataQ != NULL)
{
txDataQ_Destroy (pDrvMain->tStadHandles.hTxDataQ);
}
if (pDrvMain->tStadHandles.hTxMgmtQ != NULL)
{
txMgmtQ_Destroy (pDrvMain->tStadHandles.hTxMgmtQ);
}
if (pDrvMain->tStadHandles.hTxPort != NULL)
{
txPort_unLoad (pDrvMain->tStadHandles.hTxPort);
}
if (pDrvMain->tStadHandles.hRxData != NULL)
{
rxData_unLoad (pDrvMain->tStadHandles.hRxData);
}
if (pDrvMain->tStadHandles.hAssoc != NULL)
{
assoc_unload (pDrvMain->tStadHandles.hAssoc);
}
if (pDrvMain->tStadHandles.hAuth != NULL)
{
auth_unload (pDrvMain->tStadHandles.hAuth);
}
if (pDrvMain->tStadHandles.hMlmeSm != NULL)
{
mlme_unload (pDrvMain->tStadHandles.hMlmeSm);
}
if (pDrvMain->tStadHandles.hSCR != NULL)
{
scr_release (pDrvMain->tStadHandles.hSCR);
}
if (pDrvMain->tStadHandles.hRsn != NULL)
{
rsn_unload (pDrvMain->tStadHandles.hRsn);
}
if (pDrvMain->tStadHandles.hRegulatoryDomain != NULL)
{
regulatoryDomain_destroy (pDrvMain->tStadHandles.hRegulatoryDomain);
}
if (pDrvMain->tStadHandles.hMeasurementMgr != NULL)
{
measurementMgr_destroy (pDrvMain->tStadHandles.hMeasurementMgr);
}
if (pDrvMain->tStadHandles.hSoftGemini != NULL)
{
SoftGemini_destroy (pDrvMain->tStadHandles.hSoftGemini);
}
#ifdef XCC_MODULE_INCLUDED
if (pDrvMain->tStadHandles.hXCCMngr != NULL)
{
XCCMngr_unload (pDrvMain->tStadHandles.hXCCMngr);
}
#endif
if (pDrvMain->tStadHandles.hRoamingMngr != NULL)
{
roamingMngr_unload (pDrvMain->tStadHandles.hRoamingMngr);
}
if (pDrvMain->tStadHandles.hQosMngr != NULL)
{
qosMngr_destroy (pDrvMain->tStadHandles.hQosMngr);
}
if (pDrvMain->tStadHandles.hPowerMgr != NULL)
{
PowerMgr_destroy (pDrvMain->tStadHandles.hPowerMgr);
}
if (pDrvMain->tStadHandles.hAPConnection != NULL)
{
apConn_unload (pDrvMain->tStadHandles.hAPConnection);
}
if (pDrvMain->tStadHandles.hCurrBss != NULL)
{
currBSS_unload (pDrvMain->tStadHandles.hCurrBss);
}
if (pDrvMain->tStadHandles.hSwitchChannel != NULL)
{
switchChannel_unload (pDrvMain->tStadHandles.hSwitchChannel);
}
if (pDrvMain->tStadHandles.hHealthMonitor != NULL)
{
healthMonitor_unload (pDrvMain->tStadHandles.hHealthMonitor);
}
if (pDrvMain->tStadHandles.hCmdHndlr && pDrvMain->tStadHandles.hEvHandler)
{
cmdHndlr_Destroy (pDrvMain->tStadHandles.hCmdHndlr, pDrvMain->tStadHandles.hEvHandler);
}
if (pDrvMain->tStadHandles.hEvHandler != NULL)
{
EvHandlerUnload (pDrvMain->tStadHandles.hEvHandler);
}
if (pDrvMain->tStadHandles.hCmdDispatch)
{
cmdDispatch_Destroy (pDrvMain->tStadHandles.hCmdDispatch);
}
if (pDrvMain->tStadHandles.hTxnQ != NULL)
{
txnQ_Destroy (pDrvMain->tStadHandles.hTxnQ);
}
/* Note: The Timer module must be destroyed last, so all created timers are already destroyed!! */
if (pDrvMain->tStadHandles.hTimer != NULL)
{
tmr_Destroy (pDrvMain->tStadHandles.hTimer);
}
/* Note: Moved after timers for locks */
if (pDrvMain->tStadHandles.hContext != NULL)
{
context_Destroy (pDrvMain->tStadHandles.hContext);
}
if (pDrvMain->tStadHandles.hStaCap != NULL)
{
StaCap_Destroy (pDrvMain->tStadHandles.hStaCap);
}
if (pDrvMain->tStadHandles.hReport != NULL)
{
report_Unload (pDrvMain->tStadHandles.hReport);
}
/* Destroy the DrvMain object */
os_memoryFree (pDrvMain->tStadHandles.hOs, hDrvMain, sizeof(TDrvMain));
return TI_OK;
}
void drvMain_SmeStop (TI_HANDLE hDrvMain)
{
drvMain_SmEvent (hDrvMain, SM_EVENT_DISCONNECTED);
}
/*
* \fn drvMain_Init
* \brief Init driver modules
*
* Called from OS context following the driver creation.
* Calls all STAD and TWD modules Init functions, which are saving other modules handles,
* registering to other modules and initializing their variables.
*
* \note
* \param hDrvMain - The DrvMain object
* \return void
* \sa drvMain_Create
*/
static void drvMain_Init (TI_HANDLE hDrvMain)
{
TDrvMain *pDrvMain = (TDrvMain *) hDrvMain;
TStadHandlesList *pModules = &pDrvMain->tStadHandles; /* The STAD modules handles list */
/*
* Init all modules handles, variables and registries
*/
context_Init (pModules->hContext, pModules->hOs, pModules->hReport);
tmr_Init (pModules->hTimer, pModules->hOs, pModules->hReport, pModules->hContext);
txnQ_Init (pModules->hTxnQ, pModules->hOs, pModules->hReport, pModules->hContext);
scr_init (pModules);
conn_init (pModules);
ctrlData_init (pModules,
#ifdef XCC_MODULE_INCLUDED
XCCMngr_LinkTestRetriesUpdate, pModules->hXCCMngr);
#else
NULL, NULL);
#endif
siteMgr_init (pModules);
regulatoryDomain_init (pModules);
scanCncn_Init (pModules);
auth_init (pModules);
mlme_init (pModules);
assoc_init (pModules);
rxData_init (pModules);
txCtrl_Init (pModules);
txDataQ_Init (pModules);
txMgmtQ_Init (pModules);
txPort_init (pModules);
TrafficMonitor_Init (pModules, 1000 /* pInitTable->trafficMonitorMinIntervalPercentage */);
sme_Init (pModules);
rsn_init (pModules);
measurementMgr_init (pModules);
#ifdef XCC_MODULE_INCLUDED
XCCMngr_init (pModules);
#endif
scanMngr_init (pModules);
currBSS_init (pModules);
apConn_init (pModules);
roamingMngr_init (pModules);
qosMngr_init (pModules);
switchChannel_init (pModules);
healthMonitor_init (pModules);
PowerMgr_init (pModules);
SoftGemini_init (pModules);
cmdDispatch_Init (pModules);
StaCap_Init (pModules);
cmdHndlr_Init (pModules);
/* Init TWD component (handles, variables and registries) and provide callbacks for next steps */
TWD_Init (pModules->hTWD,
pModules->hReport,
pModules->hDrvMain,
pModules->hTimer,
pModules->hContext,
pModules->hTxnQ,
(TTwdCallback)drvMain_InitHwCb,
(TTwdCallback)drvMain_InitFwCb,
(TTwdCallback)drvMain_ConfigFwCb,
(TTwdCallback)drvMain_TwdStopCb,
(TTwdCallback)drvMain_InitFailCb);
/* Init DrvMain module local variables */
drvMain_InitLocals (pDrvMain);
}
/*
* \fn drvMain_SetDefaults
* \brief Set driver default configuration
*
* Configure all STAD and TWD modules with their default settings from the ini-file.
* Timers creation is also done at this stage.
*
* \note
* \param hDrvMain - The DrvMain object
* \param pBuf - The ini-file data.
* \param uLength - The ini-file length.
* \return TI_OK if succeeded, TI_NOK if failed.
* \sa drvMain_Init
*/
static TI_STATUS drvMain_SetDefaults (TI_HANDLE hDrvMain, TI_UINT8 *pBuf, TI_UINT32 uLength)
{
TDrvMain *pDrvMain = (TDrvMain *) hDrvMain;
TInitTable *pInitTable;
TI_STATUS eStatus;
pInitTable = os_memoryAlloc (pDrvMain->tStadHandles.hOs, sizeof(TInitTable));
/* Parse defaults */
eStatus = osInitTable_IniFile (pDrvMain->tStadHandles.hOs, pInitTable, (char*)pBuf, (int)uLength);
/*
* Configure modules with their default settings
*/
report_SetDefaults (pDrvMain->tStadHandles.hReport, &pInitTable->tReport);
context_SetDefaults (pDrvMain->tStadHandles.hContext, &pInitTable->tContextInitParams);
TWD_SetDefaults (pDrvMain->tStadHandles.hTWD, &pInitTable->twdInitParams);
conn_SetDefaults (pDrvMain->tStadHandles.hConn, &pInitTable->connInitParams);
ctrlData_SetDefaults (pDrvMain->tStadHandles.hCtrlData, &pInitTable->ctrlDataInitParams);
regulatoryDomain_SetDefaults (pDrvMain->tStadHandles.hRegulatoryDomain, &pInitTable->regulatoryDomainInitParams);
scanCncn_SetDefaults (pDrvMain->tStadHandles.hScanCncn, &pInitTable->tScanCncnInitParams);
auth_SetDefaults (pDrvMain->tStadHandles.hAuth, &pInitTable->authInitParams);
assoc_SetDefaults (pDrvMain->tStadHandles.hAssoc, &pInitTable->assocInitParams);
rxData_SetDefaults (pDrvMain->tStadHandles.hRxData, &pInitTable->rxDataInitParams);
sme_SetDefaults (pDrvMain->tStadHandles.hSme, &pInitTable->tSmeModifiedInitParams, &pInitTable->tSmeInitParams);
rsn_SetDefaults (pDrvMain->tStadHandles.hRsn, &pInitTable->rsnInitParams);
measurementMgr_SetDefaults (pDrvMain->tStadHandles.hMeasurementMgr, &pInitTable->measurementInitParams);
#ifdef XCC_MODULE_INCLUDED
XCCMngr_SetDefaults (pDrvMain->tStadHandles.hXCCMngr, &pInitTable->XCCMngrParams);
#endif /*XCC_MODULE_INCLUDED*/
apConn_SetDefaults (pDrvMain->tStadHandles.hAPConnection, &pInitTable->apConnParams);
qosMngr_SetDefaults (pDrvMain->tStadHandles.hQosMngr, &pInitTable->qosMngrInitParams);
switchChannel_SetDefaults (pDrvMain->tStadHandles.hSwitchChannel, &pInitTable->SwitchChannelInitParams);
healthMonitor_SetDefaults (pDrvMain->tStadHandles.hHealthMonitor, &pInitTable->healthMonitorInitParams);
PowerMgr_SetDefaults (pDrvMain->tStadHandles.hPowerMgr, &pInitTable->PowerMgrInitParams);
SoftGemini_SetDefaults (pDrvMain->tStadHandles.hSoftGemini, &pInitTable->SoftGeminiInitParams);
txDataQ_SetDefaults (pDrvMain->tStadHandles.hTxDataQ, &pInitTable->txDataInitParams);
txCtrl_SetDefaults (pDrvMain->tStadHandles.hTxCtrl, &pInitTable->txDataInitParams);
currBSS_SetDefaults (pDrvMain->tStadHandles.hCurrBss, &pInitTable->tCurrBssInitParams);
mlme_SetDefaults (pDrvMain->tStadHandles.hMlmeSm, &pInitTable->tMlmeInitParams);
scanMngr_SetDefaults(pDrvMain->tStadHandles.hScanMngr, &pInitTable->tRoamScanMngrInitParams);
roamingMngr_setDefaults(pDrvMain->tStadHandles.hRoamingMngr, &pInitTable->tRoamScanMngrInitParams);
/* Note: The siteMgr_SetDefaults includes many settings that relate to other modules so keep it last!! */
siteMgr_SetDefaults (pDrvMain->tStadHandles.hSiteMgr, &pInitTable->siteMgrInitParams);
/* Set DrvMain local defaults */
pDrvMain->tBusDrvCfg.tSdioCfg.uBlkSizeShift = pInitTable->tDrvMainParams.uSdioBlkSizeShift;
pDrvMain->tBusDrvCfg.tSdioCfg.uBusDrvThreadPriority = pInitTable->tDrvMainParams.uBusDrvThreadPriority;
os_SetDrvThreadPriority (pDrvMain->tStadHandles.hOs, pInitTable->tDrvMainParams.uWlanDrvThreadPriority);
/* Release the init table memory */
os_memoryFree (pDrvMain->tStadHandles.hOs, pInitTable, sizeof(TInitTable));
return eStatus;
}
/*
* \fn drvMain_xxx...Cb
* \brief Callback functions for the init/stop stages completion
*
* The following callback functions are called from other modules (most from TWD)
* when the current init/stop step is completed.
* Note that the callbacks are called anyway, either in the original context (if completed), or
* in another context if pending.
* The first case (same context) may lead to a recursion of the SM, so a special handling is added
* to the SM to prevent recursion (see drvMain_Sm).
*
* drvMain_InitHwCb - HW init completion callback
* drvMain_InitFwCb - FW init (mainly download) completion callback
* drvMain_ConfigFwCb - FW configuration completion callback
* drvMain_TwdStopCb - TWD stopping completion callback
* drvMain_InitFailCb - FW init faulty completion callback
* drvMain_SmeStopCb - SME stopping completion callback
* drvMain_GetFileCb - Getting-file completion callback
*
* \note
* \param hDrvMain - The DrvMain object
* \param eStatus - The process result (TI_OK if succeeded, TI_NOK if failed)
* \return void
* \sa drvMain_Create
*/
static void drvMain_InitHwCb (TI_HANDLE hDrvMain, TI_STATUS eStatus)
{
HANDLE_CALLBACKS_FAILURE_STATUS(hDrvMain, eStatus);
drvMain_SmEvent (hDrvMain, SM_EVENT_HW_INIT_COMPLETE);
}
static void drvMain_InitFwCb (TI_HANDLE hDrvMain, TI_STATUS eStatus)
{
HANDLE_CALLBACKS_FAILURE_STATUS(hDrvMain, eStatus);
drvMain_SmEvent (hDrvMain, SM_EVENT_FW_INIT_COMPLETE);
}
static void drvMain_ConfigFwCb (TI_HANDLE hDrvMain, TI_STATUS eStatus)
{
HANDLE_CALLBACKS_FAILURE_STATUS(hDrvMain, eStatus);
drvMain_SmEvent (hDrvMain, SM_EVENT_FW_CONFIG_COMPLETE);
}
static void drvMain_TwdStopCb (TI_HANDLE hDrvMain, TI_STATUS eStatus)
{
HANDLE_CALLBACKS_FAILURE_STATUS(hDrvMain, eStatus);
drvMain_SmEvent (hDrvMain, SM_EVENT_STOP_COMPLETE);
}
static void drvMain_InitFailCb (TI_HANDLE hDrvMain, TI_STATUS eStatus)
{
drvMain_SmEvent (hDrvMain, SM_EVENT_FAILURE);
/*
* Note that this call will pass the SM to the FAILED state, since this event
* is not handled by any state.
*/
}
static void drvMain_InvokeAction (TI_HANDLE hDrvMain)
{
TDrvMain *pDrvMain = (TDrvMain *)hDrvMain;
switch (pDrvMain->eAction)
{
case ACTION_TYPE_START:
drvMain_SmEvent (hDrvMain, SM_EVENT_START);
break;
case ACTION_TYPE_STOP:
drvMain_SmEvent (hDrvMain, SM_EVENT_STOP);
break;
default:
TRACE1(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "drvMain_InvokeAction(): Action=%d\n", pDrvMain->eAction);
}
}
static void drvMain_GetFileCb (TI_HANDLE hDrvMain)
{
TDrvMain *pDrvMain = (TDrvMain *)hDrvMain;
ESmEvent eSmEvent;
switch (pDrvMain->tFileInfo.eFileType)
{
case FILE_TYPE_INI: eSmEvent = SM_EVENT_INI_FILE_READY; break;
case FILE_TYPE_NVS: eSmEvent = SM_EVENT_NVS_FILE_READY; break;
case FILE_TYPE_FW: eSmEvent = SM_EVENT_FW_FILE_READY; break;
case FILE_TYPE_FW_NEXT: eSmEvent = SM_EVENT_FW_FILE_READY; break;
default:
TRACE1(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "drvMain_GetFileCb(): Unknown eFileType=%d\n", pDrvMain->tFileInfo.eFileType);
return;
}
drvMain_SmEvent (hDrvMain, eSmEvent);
}
/*
* \fn drvMain_InitLocals
* \brief Init DrvMain module
*
* Init the DrvMain variables, register to other modules and set device power to off.
*
* \note
* \param pDrvMain - The DrvMain object
* \return void
* \sa drvMain_Init
*/
static void drvMain_InitLocals (TDrvMain *pDrvMain)
{
/* Initialize the module's local varniables to default values */
pDrvMain->tFileInfo.eFileType = FILE_TYPE_INI;
pDrvMain->tFileInfo.fCbFunc = drvMain_GetFileCb;
pDrvMain->tFileInfo.hCbHndl = (TI_HANDLE)pDrvMain;
pDrvMain->eSmState = SM_STATE_IDLE;
pDrvMain->uPendingEventsCount = 0;
pDrvMain->bRecovery = TI_FALSE;
pDrvMain->uNumOfRecoveryAttempts = 0;
pDrvMain->eAction = ACTION_TYPE_NONE;
/* Register the Action callback to the context engine and get the client ID */
pDrvMain->uContextId = context_RegisterClient (pDrvMain->tStadHandles.hContext,
drvMain_InvokeAction,
(TI_HANDLE)pDrvMain,
TI_TRUE,
"ACTION",
sizeof("ACTION"));
/* Platform specific HW preparations */
hPlatform_Wlan_Hardware_Init(pDrvMain->tStadHandles.hOs);
/* Insure that device power is off (expected to be) */
hPlatform_DevicePowerOff ();
}
/*
* \fn drvMain_InitHw & drvMain_InitFw
* \brief Init HW and Init FW sequences
*
* drvMain_InitHw - HW init sequence which writes and reads some HW registers
* that are needed prior to FW download.
* drvMain_InitFw - FW init sequence which downloads the FW image and waits for
* FW init-complete indication.
*
* \note
* \param hDrvMain - The DrvMain object
* \param pBuf - The file data (NVS for HW-init, FW-Image for FW-init).
* \param uLength - The file length.
* \return TI_OK if succeeded, TI_NOK if failed.
* \sa
*/
static TI_STATUS drvMain_InitHw (TI_HANDLE hDrvMain, TI_UINT8 *pbuf, TI_UINT32 uLength)
{
TDrvMain *pDrvMain = (TDrvMain *) hDrvMain;
return TWD_InitHw (pDrvMain->tStadHandles.hTWD, pbuf, uLength, pDrvMain->uRxDmaBufLen, pDrvMain->uTxDmaBufLen);
}
static TI_STATUS drvMain_InitFw (TI_HANDLE hDrvMain, TFileInfo *pFileInfo)
{
TDrvMain *pDrvMain = (TDrvMain *) hDrvMain;
return TWD_InitFw (pDrvMain->tStadHandles.hTWD, pFileInfo);
}
/*
* \fn drvMain_ConfigFw
* \brief Configure the FW
*
* The step that follows the FW Init (mainly FW download).
* The Command-Mailbox interface is enabled here and the FW is configured.
*
* \note
* \param pDrvMain - The DrvMain object
* \return TI_OK
* \sa drvMain_Init
*/
static TI_STATUS drvMain_ConfigFw (TI_HANDLE hDrvMain)
{
TDrvMain *pDrvMain = (TDrvMain *) hDrvMain;
/* get pointer to FW static info (already in driver memory) */
TFwInfo *pFwInfo = TWD_GetFWInfo (pDrvMain->tStadHandles.hTWD);
TI_UINT8 *pMacAddr = (TI_UINT8 *)pFwInfo->macAddress; /* STA MAC address */
/* Update driver's MAC address */
wlanDrvIf_SetMacAddress (pDrvMain->tStadHandles.hOs, pMacAddr);
/*
* Exit from init mode should be before smeSM starts. this enable us to send
* command to the MboxQueue(that store the command) while the interrupts are masked.
* the interrupt would be enable at the end of the init process.
*/
TWD_ExitFromInitMode (pDrvMain->tStadHandles.hTWD);
/* Configure the FW from the TWD DB */
TWD_ConfigFw (pDrvMain->tStadHandles.hTWD);
TRACE0(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_INIT , "EXIT FROM INIT\n");
/* Print the driver and firmware version and the mac address */
os_printf("\n");
os_printf("-----------------------------------------------------\n");
os_printf("Driver Version : %s\n", SW_VERSION_STR);
os_printf("Firmware Version: %s\n", pFwInfo->fwVer);
os_printf("Station ID : %02X-%02X-%02X-%02X-%02X-%02X\n",
pMacAddr[0], pMacAddr[1], pMacAddr[2], pMacAddr[3], pMacAddr[4], pMacAddr[5]);
os_printf("-----------------------------------------------------\n");
os_printf("\n");
return TI_OK;
}
/*
* \fn drvMain_StopActivities
* \brief Freeze driver activities
*
* Freeze all driver activities due to stop command or recovery process.
*
* \note
* \param pDrvMain - The DrvMain object
* \return TI_OK if succeeded, TI_NOK if failed.
* \sa drvMain_EnableActivities
*/
static TI_STATUS drvMain_StopActivities (TDrvMain *pDrvMain)
{
txPort_suspendTx (pDrvMain->tStadHandles.hTxPort);
/* Disable External Inputs (IRQs and commands) */
TWD_DisableInterrupts(pDrvMain->tStadHandles.hTWD);
cmdHndlr_Disable (pDrvMain->tStadHandles.hCmdHndlr);
/* Initiate TWD Restart */
return TWD_Stop (pDrvMain->tStadHandles.hTWD);
}
/*
* \fn drvMain_EnableActivities
* \brief Enable driver activities
*
* Enable driver activities after init or recovery process completion.
*
* \note
* \param pDrvMain - The DrvMain object
* \return void
* \sa drvMain_StopActivities
*/
static void drvMain_EnableActivities (TDrvMain *pDrvMain)
{
txPort_resumeTx (pDrvMain->tStadHandles.hTxPort);
/* Enable External Inputs (IRQ is enabled elsewhere) */
cmdHndlr_Enable (pDrvMain->tStadHandles.hCmdHndlr);
/* Enable external events from FW */
TWD_EnableExternalEvents (pDrvMain->tStadHandles.hTWD);
}
/*
* \fn drvMain_ClearQueuedEvents
* \brief Enable driver activities
*
* Clear all external events queues (Tx, commands and timers) upon driver stop.
*
* \note
* \param pDrvMain - The DrvMain object
* \return void
* \sa
*/
static void drvMain_ClearQueuedEvents (TDrvMain *pDrvMain)
{
txDataQ_ClearQueues (pDrvMain->tStadHandles.hTxDataQ);
txMgmtQ_ClearQueues (pDrvMain->tStadHandles.hTxMgmtQ);
cmdHndlr_ClearQueue (pDrvMain->tStadHandles.hCmdHndlr);
tmr_ClearOperQueue (pDrvMain->tStadHandles.hTimer);
}
/*
* \fn drvMain_InsertAction
* \brief Get start/stop action and trigger handling
*
* Get start or stop action command from OAL, save it and trigger driver task
* for handling it.
* Wait on a signal object until the requested process is completed.
*
* \note
* \param hDrvMain - The DrvMain object
* \param eAction - The requested action
* \return void
* \sa
*/
TI_STATUS drvMain_InsertAction (TI_HANDLE hDrvMain, EActionType eAction)
{
TDrvMain *pDrvMain = (TDrvMain *) hDrvMain;
context_EnterCriticalSection(pDrvMain->tStadHandles.hContext);
if (pDrvMain->eAction == eAction)
{
context_LeaveCriticalSection(pDrvMain->tStadHandles.hContext);
TRACE0(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_CONSOLE, "Action is identical to last action!\n");
WLAN_OS_REPORT(("Action %d is identical to last action!\n", eAction));
return TI_OK;
}
/* Save the requested action */
pDrvMain->eAction = eAction;
context_LeaveCriticalSection(pDrvMain->tStadHandles.hContext);
/* Create signal object */
/*
* Notice that we must create the signal object before asking for ReSchedule,
* because we might receive it immidiatly, and then we will be in a different context
* with null signal object.
*/
pDrvMain->hSignalObj = os_SignalObjectCreate (pDrvMain->tStadHandles.hOs);
if (pDrvMain->hSignalObj == NULL)
{
TRACE0(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "drvMain_InsertAction(): Couldn't allocate signal object!\n");
return TI_NOK;
}
/* Request driver task schedule for action handling */
context_RequestSchedule (pDrvMain->tStadHandles.hContext, pDrvMain->uContextId);
/* Wait for the action processing completion */
os_SignalObjectWait (pDrvMain->tStadHandles.hOs, pDrvMain->hSignalObj);
/* After "wait" - the action has already been processed in the driver's context */
/* Free signalling object */
os_SignalObjectFree (pDrvMain->tStadHandles.hOs, pDrvMain->hSignalObj);
pDrvMain->hSignalObj = NULL;
if (pDrvMain->eSmState == SM_STATE_FAILED)
return TI_NOK;
return TI_OK;
}
/*
* \fn drvMain_Recovery
* \brief Initiate recovery process
*
* Initiate recovery process upon HW/FW error detection (in the Health-Monitor).
*
* \note
* \param hDrvMain - The DrvMain object
* \return TI_OK if started recovery, TI_NOK if recovery is already in progress.
* \sa
*/
TI_STATUS drvMain_Recovery (TI_HANDLE hDrvMain)
{
TDrvMain *pDrvMain = (TDrvMain *) hDrvMain;
if (!pDrvMain->bRecovery)
{
TRACE1(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_CONSOLE,".....drvMain_Recovery, ts=%d\n", os_timeStampMs(pDrvMain->tStadHandles.hOs));
#ifdef REPORT_LOG
WLAN_OS_REPORT((".....drvMain_Recovery, ts=%d\n", os_timeStampMs(pDrvMain->tStadHandles.hOs)));
#else
printk("%s\n",__func__);
#endif
pDrvMain->bRecovery = TI_TRUE;
drvMain_SmEvent (hDrvMain, SM_EVENT_RECOVERY);
return TI_OK;
}
else
{
TRACE0(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR, "drvMain_Recovery: **** Recovery already in progress! ****\n");
/* nesting recoveries... Try again */
drvMain_SmEvent (hDrvMain, SM_EVENT_RECOVERY);
return TI_NOK;
}
}
/*
* \fn drvMain_RecoveryNotify
* \brief Notify STAD modules about recovery
*
* Notify the relevant STAD modules that recovery took place (after completed).
*
* \note
* \param pDrvMain - The DrvMain object
* \return void
* \sa
*/
static void drvMain_RecoveryNotify (TDrvMain *pDrvMain)
{
txCtrl_NotifyFwReset (pDrvMain->tStadHandles.hTxCtrl);
scr_notifyFWReset (pDrvMain->tStadHandles.hSCR);
PowerMgr_notifyFWReset (pDrvMain->tStadHandles.hPowerMgr);
TRACE1(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_CONSOLE, ".....drvMain_RecoveryNotify: End Of Recovery, ts=%d\n", os_timeStampMs(pDrvMain->tStadHandles.hOs));
WLAN_OS_REPORT((".....drvMain_RecoveryNotify: End Of Recovery, ts=%d\n", os_timeStampMs(pDrvMain->tStadHandles.hOs)));
}
/*
* \fn drvMain_SmWatchdogTimeout
* \brief SM watchdog timer expiry handler
*
* This is the callback function called upon expiartion of the watchdog timer.
* It is called by the OS-API in timer expiry context, and it issues a failure event to the SM.
* Note that we can't switch to the driver task as for other timers, since we are using
* this timer to protect the init processes, and anyway we just need to stop the driver.
*
* \note
* \param hDrvMain - The DrvMain object
* \return void
* \sa
*/
#if 0
static void drvMain_SmWatchdogTimeout (TI_HANDLE hDrvMain)
{
TDrvMain *pDrvMain = (TDrvMain *)hDrvMain;
TRACE1(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "drvMain_SmWatchdogTimeout(): State = %d\n", pDrvMain->eSmState);
/* Send failure event directly to the SM (so the drvMain_SmEvent won't block it). */
drvMain_Sm ((TI_HANDLE)pDrvMain, SM_EVENT_FAILURE);
}
#endif
/*
* \fn drvMain_SmEvent
* \brief Issue DrvMain SM event
*
* Each event that is handled by the DrvMain state machine, is introduced through this function.
* To prevent SM recursion, the SM is invoeked only if it's not already handling the
* previous event.
* If the SM is busy, the current event is saved until the previous handling is completed.
*
* \note Recursion may happen because some SM activities generate SM events in the same context.
* \param hDrvMain - The DrvMain object
* \param eEvent - The event issued to the SM
* \return void
* \sa
*/
static void drvMain_SmEvent (TI_HANDLE hDrvMain, ESmEvent eEvent)
{
TDrvMain *pDrvMain = (TDrvMain *)hDrvMain;
/* Increment pending events counter and save last event. */
pDrvMain->uPendingEventsCount++;
pDrvMain->ePendingEvent = eEvent;
/* If the SM is busy, save event and exit (will be handled when current event is finished) */
if (pDrvMain->uPendingEventsCount > 1)
{
/* Only one pending event is expected (in addition to the handled one, so two together). */
if (pDrvMain->uPendingEventsCount > 2)
{
TRACE3(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "drvMain_SmEvent(): Multiple pending events (%d), State = %d, Event = %d\n", pDrvMain->uPendingEventsCount, pDrvMain->eSmState, eEvent);
}
/* Exit. The current event will be handled by the following while loop of the first instance. */
return;
}
/* Invoke the SM with the current event and further events issued by the last SM invocation. */
while (pDrvMain->uPendingEventsCount > 0)
{
drvMain_Sm (hDrvMain, pDrvMain->ePendingEvent);
/*
* Note: The SM may issue another event by calling this function and incrementing
* the counter.
* In this case, only the upper part of this function is run, and the pending
* event is hanlded in the next while loo[.
*/
pDrvMain->uPendingEventsCount--;
}
}
/*
* \fn drvMain_Sm
* \brief The DrvMain state machine
*
* The DrvMain state machine, which handles all driver init, recovery and stop processes.
*
* \note Since the SM may be called back from its own context, recursion is prevented
* by postponing the last event.
* \param hDrvMain - The DrvMain object
* \param eEvent - The event that triggers the SM
* \return void
* \sa
*/
static void drvMain_Sm (TI_HANDLE hDrvMain, ESmEvent eEvent)
{
TDrvMain *pDrvMain = (TDrvMain *)hDrvMain;
TI_STATUS eStatus = TI_NOK;
TI_HANDLE hOs = pDrvMain->tStadHandles.hOs;
TI_UINT32 uSdioConIndex = 0;
TI_BOOL tmpRecovery;
TRACE2(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_INFORMATION , "drvMain_Sm(): State = %d, Event = %d\n", pDrvMain->eSmState, eEvent);
/*
* General explenations:
* =====================
* 1) This SM calls some functions that may complete their processing in another context.
* All of these functions (wlanDrvIf_GetFile, drvMain_InitHw, drvMain_InitFw, drvMain_ConfigFw,
* drvMain_StopActivities, smeSm_start, smeSm_stop) are provided with a callback which
* they always call upon completion, even if they are completed in the original (SM) context.
* Since these callbacks are calling the SM, a simple mechanism is added to prevent
* recursion, by postponing the last event if the SM is still in the previous event's context.
* 2) In any case of unexpected event, the eStatus remains TI_NOK, leading to the FAILED state!
* FAILED state is also reached if any of the functions listed in note 1 returns TI_NOK.
* Note that if these functions detect a failure in another context, they may call their callback
* with the eStatus parameter set to TI_NOK, or call the drvMain_InitFailCb callback.
* All these cases lead to FAILED state which terminates all driver activities and wait for destroy.
* 3) Note that the wlanDrvIf_GetFile is always completed in the original context, and the
* option of completion in a later context is only for future use.
* 4) All processes (Start, Stop, Relcovery) are protected by a watchdog timer to let
* the user free the driver in case of deadlock during the process.
*/
switch (pDrvMain->eSmState)
{
case SM_STATE_IDLE:
/*
* We get a START action after all modules are created and linked.
* Disable further actions, start watchdog timer and request for the ini-file.
*/
if (eEvent == SM_EVENT_START)
{
pDrvMain->eSmState = SM_STATE_WAIT_INI_FILE;
context_DisableClient (pDrvMain->tStadHandles.hContext, pDrvMain->uContextId);
pDrvMain->tFileInfo.eFileType = FILE_TYPE_INI;
eStatus = wlanDrvIf_GetFile (hOs, &pDrvMain->tFileInfo);
}
break;
case SM_STATE_WAIT_INI_FILE:
/*
* We've got the ini-file.
* Set STAD and TWD modules defaults according to the ini-file,
* turn on the device and request for the NVS file.
*/
if (eEvent == SM_EVENT_INI_FILE_READY)
{
pDrvMain->eSmState = SM_STATE_WAIT_NVS_FILE;
drvMain_SetDefaults (hDrvMain, pDrvMain->tFileInfo.pBuffer, pDrvMain->tFileInfo.uLength);
hPlatform_DevicePowerOn ();
pDrvMain->tFileInfo.eFileType = FILE_TYPE_NVS;
eStatus = wlanDrvIf_GetFile (hOs, &pDrvMain->tFileInfo);
}
break;
case SM_STATE_WAIT_NVS_FILE:
/* SDBus Connect connection validation */
for(uSdioConIndex=0; (uSdioConIndex < SDIO_CONNECT_THRESHOLD) && (eStatus != TI_OK); uSdioConIndex++)
{
/* : We should split the call to txnQ_ConnectBus to other state in order to support Async bus connection */
eStatus = txnQ_ConnectBus(pDrvMain->tStadHandles.hTxnQ, &pDrvMain->tBusDrvCfg, NULL, NULL, &pDrvMain->uRxDmaBufLen, &pDrvMain->uTxDmaBufLen);
if((eStatus != TI_OK) &&
(uSdioConIndex < (SDIO_CONNECT_THRESHOLD - 1)))
{
TRACE0(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_WARNING , "SDBus Connect Failed\n");
WLAN_OS_REPORT(("Try to SDBus Connect again...\n"));
if (uSdioConIndex > 1)
hPlatform_DevicePowerOffSetLongerDelay();
else
hPlatform_DevicePowerOff();
hPlatform_DevicePowerOn();
}
}
if(eStatus != TI_OK)
{
WLAN_OS_REPORT(("SDBus Connect Failed, Set Object Event !!\r\n"));
TRACE0(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "SDBus Connect Failed, Set Object Event !!\r\n");
if (!pDrvMain->bRecovery)
{
os_SignalObjectSet(hOs, pDrvMain->hSignalObj);
}
}
else /* SDBus Connect success */
{
/*
* We've got the NVS file.
* Start HW-Init process providing the NVS file.
*/
if (eEvent == SM_EVENT_NVS_FILE_READY)
{
pDrvMain->eSmState = SM_STATE_HW_INIT;
eStatus = drvMain_InitHw (hDrvMain, pDrvMain->tFileInfo.pBuffer, pDrvMain->tFileInfo.uLength);
}
}
break;
case SM_STATE_HW_INIT:
/*
* HW-Init process is completed.
* Request for the FW image file.
*/
if (eEvent == SM_EVENT_HW_INIT_COMPLETE)
{
pDrvMain->tFileInfo.eFileType = FILE_TYPE_FW;
pDrvMain->eSmState = SM_STATE_DOWNLOAD_FW_FILE;
eStatus = wlanDrvIf_GetFile (hOs, &pDrvMain->tFileInfo);
}
break;
case SM_STATE_DOWNLOAD_FW_FILE:
if (eEvent == SM_EVENT_FW_FILE_READY)
{
pDrvMain->tFileInfo.eFileType = FILE_TYPE_FW_NEXT;
if (pDrvMain->tFileInfo.bLast == TI_TRUE)
{
pDrvMain->eSmState = SM_STATE_FW_INIT;
}
else
{
pDrvMain->eSmState = SM_STATE_WAIT_FW_FILE;
}
/*
* We've got the FW image file.
* Start FW-Init process (mainly FW image download) providing the FW image file.
*/
eStatus = drvMain_InitFw (hDrvMain, &pDrvMain->tFileInfo);
}
break;
case SM_STATE_WAIT_FW_FILE:
if (eEvent == SM_EVENT_FW_INIT_COMPLETE)
{
pDrvMain->eSmState = SM_STATE_DOWNLOAD_FW_FILE;
eStatus = wlanDrvIf_GetFile (hOs, &pDrvMain->tFileInfo);
}
break;
case SM_STATE_FW_INIT:
/*
* FW-Init process is completed.
* Free the semaphore of the START action to enable the OS interface.
* Enable interrupts (or polling for debug).
* Start FW-Configuration process, and free the semaphore of the START action.
*
* Note that in some OSs, the semaphore must be released in order to enable the
* interrupts, and the interrupts are needed for the configuration process!
*/
if (eEvent == SM_EVENT_FW_INIT_COMPLETE)
{
pDrvMain->eSmState = SM_STATE_FW_CONFIG;
TWD_EnableInterrupts(pDrvMain->tStadHandles.hTWD);
#ifdef PRIODIC_INTERRUPT
/* Start periodic interrupts. It means that every period of time the FwEvent SM will be called */
os_periodicIntrTimerStart (hOs);
#endif
eStatus = drvMain_ConfigFw (hDrvMain);
}
break;
case SM_STATE_FW_CONFIG:
/*
* FW-configuration process is completed.
* Stop watchdog timer.
* For recovery, notify the relevant STAD modules.
* For regular start, start the SME which handles the connection process.
* Update timer and OAL about entering OPERATIONAL state (OAL ignores recovery)
* Enable driver activities and external events.
* Enable STOP action
* We are now in OPERATIONAL state, i.e. the driver is fully operational!
*/
tmpRecovery = pDrvMain->bRecovery;
if (eEvent == SM_EVENT_FW_CONFIG_COMPLETE)
{
pDrvMain->eSmState = SM_STATE_OPERATIONAL;
if (pDrvMain->bRecovery)
{
pDrvMain->uNumOfRecoveryAttempts = 0;
drvMain_RecoveryNotify (pDrvMain);
pDrvMain->bRecovery = TI_FALSE;
}
else
{
sme_Start (pDrvMain->tStadHandles.hSme);
wlanDrvIf_UpdateDriverState (hOs, DRV_STATE_RUNNING);
}
tmr_UpdateDriverState (pDrvMain->tStadHandles.hTimer, TI_TRUE);
drvMain_EnableActivities (pDrvMain);
context_EnableClient (pDrvMain->tStadHandles.hContext, pDrvMain->uContextId);
eStatus = TI_OK;
}
if (!tmpRecovery)
{
os_SignalObjectSet(hOs, pDrvMain->hSignalObj);
}
break;
case SM_STATE_OPERATIONAL:
/*
* Disable start/stop commands and start watchdog timer.
* Update timer and OAL about exiting OPERATIONAL state (OAL ignores recovery).
* For STOP, stop SME (handle disconnection) and move to DISCONNECTING state.
* For recovery, stop driver activities and move to STOPPING state.
* Note that driver-stop process may be Async if we are during Async bus transaction.
*/
context_DisableClient (pDrvMain->tStadHandles.hContext, pDrvMain->uContextId);
tmr_UpdateDriverState (pDrvMain->tStadHandles.hTimer, TI_FALSE);
if (eEvent == SM_EVENT_STOP)
{
pDrvMain->eSmState = SM_STATE_DISCONNECTING;
wlanDrvIf_UpdateDriverState (hOs, DRV_STATE_STOPING);
sme_Stop (pDrvMain->tStadHandles.hSme);
eStatus = TI_OK;
}
else if (eEvent == SM_EVENT_RECOVERY)
{
pDrvMain->eSmState = SM_STATE_STOPPING;
eStatus = drvMain_StopActivities (pDrvMain);
}
break;
case SM_STATE_DISCONNECTING:
/*
* Note that this state is not relevant for recovery.
* SME stop is completed
* Stop driver activities and move to STOPPING state.
* Note that driver stop process may be Async if we are during Async bus transaction.
*/
if (eEvent == SM_EVENT_DISCONNECTED)
{
pDrvMain->eSmState = SM_STATE_STOPPING;
eStatus = drvMain_StopActivities (pDrvMain);
}
break;
case SM_STATE_STOPPING:
/*
* Driver stopping process is done.
* Turn device power off.
* For recovery, turn device power back on, request NVS file and continue with
* the init process (recover back all the way to OPERATIONAL state).
* For STOP process, the driver is now fully stopped (STOPPED state), so stop watchdog timer,
* clear all events queues, free the semaphore of the STOP action and enable START action.
*/
if (eEvent == SM_EVENT_STOP_COMPLETE)
{
txnQ_DisconnectBus (pDrvMain->tStadHandles.hTxnQ);
hPlatform_DevicePowerOff ();
if (pDrvMain->bRecovery)
{
hPlatform_DevicePowerOn ();
pDrvMain->eSmState = SM_STATE_WAIT_NVS_FILE;
pDrvMain->tFileInfo.eFileType = FILE_TYPE_NVS;
eStatus = wlanDrvIf_GetFile (hOs, &pDrvMain->tFileInfo);
}
else
{
pDrvMain->eSmState = SM_STATE_STOPPED;
drvMain_ClearQueuedEvents (pDrvMain);
scr_notifyFWReset(pDrvMain->tStadHandles.hSCR);
os_SignalObjectSet (hOs, pDrvMain->hSignalObj);
context_EnableClient (pDrvMain->tStadHandles.hContext, pDrvMain->uContextId);
wlanDrvIf_UpdateDriverState (hOs, DRV_STATE_STOPPED);
eStatus = TI_OK;
}
}
break;
case SM_STATE_STOPPED:
/*
* A START action command was inserted, so we go through the init process.
* Disable further actions, start watchdog timer, turn on device and request NVS file.
*/
context_DisableClient (pDrvMain->tStadHandles.hContext, pDrvMain->uContextId);
if (eEvent == SM_EVENT_START)
{
hPlatform_DevicePowerOn ();
pDrvMain->eSmState = SM_STATE_WAIT_NVS_FILE;
pDrvMain->tFileInfo.eFileType = FILE_TYPE_NVS;
eStatus = wlanDrvIf_GetFile (hOs, &pDrvMain->tFileInfo);
}
break;
case SM_STATE_STOPPING_ON_FAIL:
/*
* Driver stopping process upon failure is completed.
* Turn off the device and move to FAILED state.
*/
pDrvMain->eSmState = SM_STATE_FAILED;
txnQ_DisconnectBus (pDrvMain->tStadHandles.hTxnQ);
hPlatform_DevicePowerOff ();
if (!pDrvMain->bRecovery)
{
os_SignalObjectSet (hOs, pDrvMain->hSignalObj);
}
else if (pDrvMain->uNumOfRecoveryAttempts < MAX_NUM_OF_RECOVERY_TRIGGERS)
{
pDrvMain->uNumOfRecoveryAttempts++;
pDrvMain->eSmState = SM_STATE_STOPPING;
eStatus = drvMain_StopActivities (pDrvMain);
}
WLAN_OS_REPORT(("[WLAN] Exit application\n"));
pDrvMain->bRecovery = TI_FALSE;
break;
case SM_STATE_FAILED:
/* Nothing to do except waiting for Destroy */
break;
default:
TRACE2(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "drvMain_Sm: Unknown state, eEvent=%u at state=%u\n", eEvent, pDrvMain->eSmState);
/* Note: Handled below as a failure since the status remains TI_NOK */
break;
}
/* Handle failures (status = NOK) if not handled yet */
if ((eStatus == TI_NOK) &&
(pDrvMain->eSmState != SM_STATE_FAILED) &&
(pDrvMain->eSmState != SM_STATE_STOPPING_ON_FAIL))
{
TRACE3(pDrvMain->tStadHandles.hReport, REPORT_SEVERITY_ERROR , "drvMain_Sm: eEvent=%u at state=%u, status=%d\n", eEvent, pDrvMain->eSmState, eStatus);
pDrvMain->eSmState = SM_STATE_STOPPING_ON_FAIL;
wlanDrvIf_UpdateDriverState (hOs, DRV_STATE_FAILED);
/*
* Stop all activities. This may be completed in a different context if
* we should wait for an Async bus transaction completion.
* The drvMain_TwdStopCb is called from the TWD in any case to pass
* us to the SM_STATE_FAILED state (where we wait for Destroy).
*/
eStatus = drvMain_StopActivities (pDrvMain);
}
}