blob: 6831a557088b4cdd6a6ea1e16b08960a5b712794 [file] [log] [blame]
/*
* SwitchChannel.c
*
* Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Texas Instruments nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** \file SwitchChannel.c
* \brief SwitchChannel module interface
*
* \see SwitchChannelApi.h
*/
/****************************************************************************************************/
/* */
/* MODULE: SwitchChannel.c */
/* PURPOSE: SwitchChannel module interface. */
/* This module perform SwitchChannel (Dynamic Frequency Selection) */
/* according to AP command. The object responsibles for switching channel after*/
/* the requires time and quieting the channel for the required duration */
/* time. */
/****************************************************************************************************/
#define __FILE_ID__ FILE_ID_7
#include "tidef.h"
#include "report.h"
#include "osApi.h"
#include "paramOut.h"
#include "SwitchChannelApi.h"
#include "DataCtrl_Api.h"
#include "regulatoryDomainApi.h"
#include "apConn.h"
#include "siteMgrApi.h"
#include "PowerMgr_API.h"
#include "healthMonitor.h"
#include "TWDriver.h"
#include "DrvMainModules.h"
/* allocation vector */
#define SC_INIT_BIT (1)
#define SC_SM_INIT_BIT (2)
#define SC_SWITCH_CHANNEL_CMD_LEN 3
#define SC_SWITCH_CHANNEL_MODE_NOT_TX_SUS 0
#define SC_SWITCH_CHANNEL_MODE_TX_SUS 1
#define SC_CHANNEL_INVALID TI_FALSE
#define SC_CHANNEL_VALID TI_TRUE
/* Enumerations */
/** state machine states */
typedef enum
{
SC_STATE_IDLE = 0,
SC_STATE_WAIT_4_CMD = 1,
SC_STATE_WAIT_4_SCR = 2,
SC_STATE_SC_IN_PROG = 3,
SC_STATE_LAST = 4
} switchChannel_smStates;
/** State machine events */
typedef enum
{
SC_EVENT_START = 0,
SC_EVENT_STOP = 1,
SC_EVENT_SC_CMD = 2,
SC_EVENT_SCR_RUN = 3,
SC_EVENT_SCR_FAIL = 4,
SC_EVENT_SC_CMPLT = 5,
SC_EVENT_FW_RESET = 6,
SC_EVENT_LAST = 7
} switchChannel_smEvents;
#define SC_NUM_STATES SC_STATE_LAST
#define SC_NUM_EVENTS SC_EVENT_LAST
/* Structures */
typedef struct
{
/* SwitchChannel parameters that can be configured externally */
TI_BOOL dot11SpectrumManagementRequired;
/* Internal SwitchChannel parameters */
TI_UINT8 currentState;
dot11_CHANNEL_SWITCH_t curChannelSwitchCmdParams;
TI_UINT32 SCRRequestTimestamp;
TI_UINT8 currentChannel;
TI_BOOL switchChannelStarted;
#ifdef TI_DBG
/* switchChannelCmd for debug */
dot11_CHANNEL_SWITCH_t debugChannelSwitchCmdParams;
TI_UINT8 ignoreCancelSwitchChannelCmd;
#endif
/* SwitchChannel SM */
fsm_stateMachine_t *pSwitchChannelSm;
/* SwitchChannel handles to other objects */
TI_HANDLE hTWD;
TI_HANDLE hSiteMgr;
TI_HANDLE hSCR;
TI_HANDLE hRegulatoryDomain;
TI_HANDLE hPowerMngr;
TI_HANDLE hApConn;
TI_HANDLE hReport;
TI_HANDLE hOs;
} switchChannel_t;
/* External data definitions */
/* Local functions definitions */
/* Global variables */
/********************************************************************************/
/* Internal functions prototypes. */
/********************************************************************************/
/* SM functions */
static TI_STATUS switchChannel_smStartSwitchChannelCmd(void *pData);
static TI_STATUS switchChannel_smReqSCR_UpdateCmd(void *pData);
static TI_STATUS switchChannel_smSwitchChannelCmplt(void *pData);
static TI_STATUS switchChannel_smFwResetWhileSCInProg(void *pData);
static TI_STATUS switchChannel_smScrFailWhileWait4Scr(void *pData);
static TI_STATUS switchChannel_smNop(void *pData);
static TI_STATUS switchChannel_smUnexpected(void *pData);
static TI_STATUS switchChannel_smStopWhileWait4Cmd(void *pData);
static TI_STATUS switchChannel_smStopWhileWait4Scr(void *pData);
static TI_STATUS switchChannel_smStopWhileSwitchChannelInProg(void *pData);
static TI_STATUS switchChannel_smStart(void *pData);
/* other functions */
static void release_module(switchChannel_t *pSwitchChannel, TI_UINT32 initVec);
static TI_STATUS switchChannel_smEvent(TI_UINT8 *currState, TI_UINT8 event, void* data);
static void switchChannel_zeroDatabase(switchChannel_t *pSwitchChannel);
void switchChannel_SwitchChannelCmdCompleteReturn(TI_HANDLE hSwitchChannel);
void switchChannel_scrStatusCB(TI_HANDLE hSwitchChannel, EScrClientRequestStatus requestStatus,
EScrResourceId eResource, EScePendReason pendReason );
#ifdef TI_DBG
static void switchChannel_recvCmd4Debug(TI_HANDLE hSwitchChannel, dot11_CHANNEL_SWITCH_t *channelSwitch, TI_BOOL BeaconPacket, TI_UINT8 channel);
#endif
/********************************************************************************/
/* Interface functions Implementation. */
/********************************************************************************/
/************************************************************************
* switchChannel_create *
************************************************************************/
/**
*
* \b Description:
*
* This procedure is called by the config manager when the driver is created.
* It creates the SwitchChannel object.
*
* \b ARGS:
*
* I - hOs - OS context \n
*
* \b RETURNS:
*
* Handle to the SwitchChannel object.
*
* \sa
*/
TI_HANDLE switchChannel_create(TI_HANDLE hOs)
{
switchChannel_t *pSwitchChannel = NULL;
TI_UINT32 initVec = 0;
TI_STATUS status;
/* allocating the SwitchChannel object */
pSwitchChannel = os_memoryAlloc(hOs,sizeof(switchChannel_t));
if (pSwitchChannel == NULL)
return NULL;
initVec |= (1 << SC_INIT_BIT);
os_memoryZero(hOs, pSwitchChannel, sizeof(switchChannel_t));
pSwitchChannel->hOs = hOs;
status = fsm_Create(hOs, &pSwitchChannel->pSwitchChannelSm, SC_NUM_STATES, SC_NUM_EVENTS);
if (status != TI_OK)
{
release_module(pSwitchChannel, initVec);
WLAN_OS_REPORT(("FATAL ERROR: switchChannel_create(): Error Creating pSwitchChannelSm - Aborting\n"));
return NULL;
}
initVec |= (1 << SC_SM_INIT_BIT);
return(pSwitchChannel);
}
/************************************************************************
* switchChannel_init *
************************************************************************/
/**
*
* \b Description:
*
* This procedure is called by the DrvMain when the driver is initialized.
* It initializes the SwitchChannel object's variables and handlers and creates the SwitchChannel SM.
*
* \b ARGS:
*
* I - pStadHandles - The driver modules handles \n
*
* \b RETURNS:
*
* void
*
* \sa
*/
void switchChannel_init (TStadHandlesList *pStadHandles)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)(pStadHandles->hSwitchChannel);
/** Roaming State Machine matrix */
fsm_actionCell_t switchChannel_SM[SC_NUM_STATES][SC_NUM_EVENTS] =
{
/* next state and actions for IDLE state */
{ {SC_STATE_WAIT_4_CMD, switchChannel_smStart}, /* START */
{SC_STATE_IDLE, switchChannel_smNop}, /* STOP */
{SC_STATE_IDLE, switchChannel_smNop}, /* SC_CMD */
{SC_STATE_IDLE, switchChannel_smUnexpected}, /* SCR_RUN */
{SC_STATE_IDLE, switchChannel_smUnexpected}, /* SCR_FAIL */
{SC_STATE_IDLE, switchChannel_smUnexpected}, /* SC_CMPLT */
{SC_STATE_IDLE, switchChannel_smUnexpected} /* FW_RESET */
},
/* next state and actions for WAIT_4_CMD state */
{ {SC_STATE_WAIT_4_CMD, switchChannel_smNop}, /* START */
{SC_STATE_IDLE, switchChannel_smStopWhileWait4Cmd}, /* STOP */
{SC_STATE_WAIT_4_SCR, switchChannel_smReqSCR_UpdateCmd}, /* SC_CMD */
{SC_STATE_WAIT_4_CMD, switchChannel_smUnexpected}, /* SCR_RUN */
{SC_STATE_WAIT_4_CMD, switchChannel_smUnexpected}, /* SCR_FAIL */
{SC_STATE_WAIT_4_CMD, switchChannel_smUnexpected}, /* SC_CMPLT */
{SC_STATE_WAIT_4_CMD, switchChannel_smUnexpected} /* FW_RESET */
},
/* next state and actions for WAIT_4_SCR state */
{ {SC_STATE_WAIT_4_SCR, switchChannel_smUnexpected}, /* START */
{SC_STATE_IDLE, switchChannel_smStopWhileWait4Scr}, /* STOP */
{SC_STATE_WAIT_4_SCR, switchChannel_smNop}, /* SC_CMD */
{SC_STATE_SC_IN_PROG, switchChannel_smStartSwitchChannelCmd}, /* SCR_RUN */
{SC_STATE_WAIT_4_CMD, switchChannel_smScrFailWhileWait4Scr}, /* SCR_FAIL */
{SC_STATE_WAIT_4_SCR, switchChannel_smUnexpected} , /* SC_CMPLT */
{SC_STATE_WAIT_4_CMD, switchChannel_smUnexpected} /* FW_RESET */
},
/* next state and actions for switchChannel_IN_PROG state */
{ {SC_STATE_SC_IN_PROG, switchChannel_smUnexpected}, /* START */
{SC_STATE_IDLE, switchChannel_smStopWhileSwitchChannelInProg}, /* STOP */
{SC_STATE_SC_IN_PROG, switchChannel_smNop}, /* SC_CMD */
{SC_STATE_SC_IN_PROG, switchChannel_smUnexpected}, /* SCR_RUN */
{SC_STATE_WAIT_4_CMD, switchChannel_smUnexpected}, /* SCR_FAIL */
{SC_STATE_WAIT_4_CMD, switchChannel_smSwitchChannelCmplt}, /* SC_CMPLT */
{SC_STATE_WAIT_4_CMD, switchChannel_smFwResetWhileSCInProg} /* FW_RESET */
}
};
fsm_Config(pSwitchChannel->pSwitchChannelSm,
&switchChannel_SM[0][0],
SC_NUM_STATES,
SC_NUM_EVENTS,
switchChannel_smEvent, pSwitchChannel->hOs);
/* init handlers */
pSwitchChannel->hTWD = pStadHandles->hTWD;
pSwitchChannel->hSiteMgr = pStadHandles->hSiteMgr;
pSwitchChannel->hSCR = pStadHandles->hSCR;
pSwitchChannel->hRegulatoryDomain = pStadHandles->hRegulatoryDomain;
pSwitchChannel->hApConn = pStadHandles->hAPConnection;
pSwitchChannel->hReport = pStadHandles->hReport;
pSwitchChannel->hOs = pStadHandles->hOs;
}
TI_STATUS switchChannel_SetDefaults (TI_HANDLE hSwitchChannel, SwitchChannelInitParams_t *SwitchChannelInitParams)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)hSwitchChannel;
/* init variables */
pSwitchChannel->dot11SpectrumManagementRequired = SwitchChannelInitParams->dot11SpectrumManagementRequired;
pSwitchChannel->currentState = SC_STATE_IDLE;
pSwitchChannel->currentChannel = 0;
pSwitchChannel->switchChannelStarted = TI_FALSE;
/* register to SCR */
scr_registerClientCB(pSwitchChannel->hSCR, SCR_CID_SWITCH_CHANNEL,
switchChannel_scrStatusCB, pSwitchChannel);
/* register to Switch Channel Complete event in HAL */
TWD_RegisterEvent (pSwitchChannel->hTWD,
TWD_OWN_EVENT_SWITCH_CHANNEL_CMPLT,
(void *)switchChannel_SwitchChannelCmdCompleteReturn,
pSwitchChannel);
TWD_EnableEvent (pSwitchChannel->hTWD, TWD_OWN_EVENT_SWITCH_CHANNEL_CMPLT);
#ifdef TI_DBG
/* for debug */
pSwitchChannel->debugChannelSwitchCmdParams.hdr[0] = CHANNEL_SWITCH_ANNOUNCEMENT_IE_ID;
pSwitchChannel->debugChannelSwitchCmdParams.hdr[1] = SC_SWITCH_CHANNEL_CMD_LEN;
pSwitchChannel->ignoreCancelSwitchChannelCmd = 0;
#endif
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INIT, ".....SwitchChannel configured successfully\n");
return TI_OK;
}
/************************************************************************
* switchChannel_stop *
************************************************************************/
/**
*
* \b Description:
*
* This procedure is called by the SME when the state is changed from CONNECTED.
* It generates a STOP event to the SwitchChannel SM.
*
* \b ARGS:
*
* I - hSwitchChannel - SwitchChannel context \n
*
* \b RETURNS:
*
* TI_OK on success, TI_NOK otherwise
*
* \sa
*/
TI_STATUS switchChannel_stop(TI_HANDLE hSwitchChannel)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)hSwitchChannel;
pSwitchChannel->switchChannelStarted = TI_FALSE;
return (switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_STOP, pSwitchChannel));
}
/************************************************************************
* switchChannel_start *
************************************************************************/
/**
*
* \b Description:
*
* This procedure is called by the SME when the state is changed to CONNECTED.
* It generates a START event to the SwitchChannel SM.
*
* \b ARGS:
*
* I - hSwitchChannel - SwitchChannel context \n
*
* \b RETURNS:
*
* TI_OK on success, TI_NOK otherwise
*
* \sa
*/
TI_STATUS switchChannel_start(TI_HANDLE hSwitchChannel)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)hSwitchChannel;
pSwitchChannel->switchChannelStarted = TI_TRUE;
return (switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_START, pSwitchChannel));
}
/************************************************************************
* switchChannel_unload *
************************************************************************/
/**
*
* \b Description:
*
* This procedure is called by the config manager when the driver is unloaded.
* It frees any memory allocated and timers.
*
* \b ARGS:
*
* I - hSwitchChannel - SwitchChannel context \n
*
* \b RETURNS:
*
* TI_OK on success, TI_NOK otherwise
*
* \sa
*/
TI_STATUS switchChannel_unload(TI_HANDLE hSwitchChannel)
{
TI_UINT32 initVec;
switchChannel_t *pSwitchChannel = (switchChannel_t *)hSwitchChannel;
if (pSwitchChannel == NULL)
return TI_OK;
initVec = 0xff;
release_module(pSwitchChannel, initVec);
return TI_OK;
}
/************************************************************************
* switchChannel_recvCmd *
************************************************************************/
/*DESCRIPTION: This function is called by MLME Parser upon receiving of
Beacon, Probe Response or Action with Switch Channel command,
or beacon/
performs the following:
- Initializes the switching channel procedure.
- Setting timer to the actual switching time(if needed)
INPUT: hSwitchChannel - SwitchChannel handle.
switchMode - indicates whether to stop transmission
until the scheduled channel switch.
newChannelNum - indicates the number of the new channel.
durationTime - indicates the time (expressed in ms) until
the scheduled channel switch should accure.
OUTPUT: None
RETURN: TI_OK on success, TI_NOK otherwise
************************************************************************/
void switchChannel_recvCmd(TI_HANDLE hSwitchChannel, dot11_CHANNEL_SWITCH_t *channelSwitch, TI_UINT8 channel)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)hSwitchChannel;
paramInfo_t param;
if (pSwitchChannel==NULL)
{
return;
}
param.paramType = REGULATORY_DOMAIN_DFS_CHANNELS_RANGE;
regulatoryDomain_getParam(pSwitchChannel->hRegulatoryDomain, &param);
if (!pSwitchChannel->dot11SpectrumManagementRequired ||
(channel < param.content.DFS_ChannelRange.minDFS_channelNum) ||
(channel > param.content.DFS_ChannelRange.maxDFS_channelNum))
{ /* Do not parse Switch Channel IE, when SpectrumManagement is disabled,
or the channel is non-DFS channel */
return;
}
#ifdef TI_DBG
/* for debug purposes only */
if (pSwitchChannel->ignoreCancelSwitchChannelCmd != 0)
{
return;
}
#endif
if (channelSwitch == NULL)
{ /* No SC IE, update regDomain */
param.paramType = REGULATORY_DOMAIN_UPDATE_CHANNEL_VALIDITY;
param.content.channel = channel;
regulatoryDomain_setParam(pSwitchChannel->hRegulatoryDomain, &param);
}
else
{ /* SC IE exists */
TRACE3(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_recvFrame, SwitchChannel cmd was found, channel no=%d, mode=%d, TBTT=%d \n", channelSwitch->channelNumber, channelSwitch->channelSwitchMode, channelSwitch->channelSwitchCount);
/* Checking channel number validity */
param.content.channel = channelSwitch->channelNumber;
param.paramType = REGULATORY_DOMAIN_IS_CHANNEL_SUPPORTED;
regulatoryDomain_getParam(pSwitchChannel->hRegulatoryDomain,&param);
if ( ( !param.content.bIsChannelSupprted ) ||
(channelSwitch->channelSwitchCount == 0) ||
(channelSwitch->channelSwitchMode == SC_SWITCH_CHANNEL_MODE_TX_SUS))
{ /* Trigger Roaming, if TX mode is disabled, the new channel number is invalid,
or the TBTT count is 0 */
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "report Roaming trigger\n");
if (channelSwitch->channelSwitchMode == SC_SWITCH_CHANNEL_MODE_TX_SUS)
{
param.paramType = REGULATORY_DOMAIN_SET_CHANNEL_VALIDITY;
param.content.channelValidity.channelNum = channel;
param.content.channelValidity.channelValidity = TI_FALSE;
regulatoryDomain_setParam(pSwitchChannel->hRegulatoryDomain, &param);
}
if (TI_TRUE == pSwitchChannel->switchChannelStarted)
{
apConn_reportRoamingEvent(pSwitchChannel->hApConn, ROAMING_TRIGGER_SWITCH_CHANNEL, NULL);
}
}
else
{ /* Invoke Switch Channel command */
/* update the new SCC params */
pSwitchChannel->curChannelSwitchCmdParams.channelNumber = channelSwitch->channelNumber;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount = channelSwitch->channelSwitchCount;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchMode = channelSwitch->channelSwitchMode;
switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_SC_CMD, pSwitchChannel);
}
}
}
/************************************************************************
* switchChannel_powerSaveStatusReturn *
************************************************************************/
/**
*
* \b Description:
*
* This procedure is called when power save status is returned
*
* \b ARGS:
*
* I/O - hSwitchChannel - SwitchChannel context \n
*
* \b RETURNS:
*
* TI_OK on success, TI_NOK otherwise.
*
* \sa
*/
void switchChannel_SwitchChannelCmdCompleteReturn(TI_HANDLE hSwitchChannel)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
if (pSwitchChannel == NULL)
{
return;
}
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_SwitchChannelCmdCompleteReturn \n");
switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_SC_CMPLT, pSwitchChannel);
}
/************************************************************************
* switchChannel_enableDisableSpectrumMngmt *
************************************************************************/
/**
*
* \b Description:
*
* This procedure enables or disables the spectrum management
*
* \b ARGS:
*
* I - hSwitchChannel - SwitchChannel context \n
* I - enableDisable - TI_TRUE - Enable, TI_FALSE - Disable
*
* \b RETURNS:
*
* TI_OK on success, TI_NOK otherwise.
*
* \sa
*/
void switchChannel_enableDisableSpectrumMngmt(TI_HANDLE hSwitchChannel, TI_BOOL enableDisable)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
if (hSwitchChannel == NULL)
{
return;
}
TRACE1(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_enableDisableSpectrumMngmt, enableDisable=%d \n", enableDisable);
pSwitchChannel->dot11SpectrumManagementRequired = enableDisable;
if (enableDisable)
{ /* Enable SC, if it was started invoke start event.
otherwise, wait for a start event */
if (pSwitchChannel->switchChannelStarted)
{
switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_START, pSwitchChannel);
}
}
else
{ /* Disable SC */
switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_STOP, pSwitchChannel);
}
}
/************************************************************************
* SwitchChannel internal functions *
************************************************************************/
/************************************************************************
* switchChannel_smEvent *
************************************************************************/
/**
*
* \b Description:
*
* SwitchChannel state machine transition function
*
* \b ARGS:
*
* I/O - currentState - current state in the state machine\n
* I - event - specific event for the state machine\n
* I - pData - Data for state machine action function\n
*
* \b RETURNS:
*
* TI_OK on success, TI_NOK otherwise.
*
* \sa
*/
static TI_STATUS switchChannel_smEvent(TI_UINT8 *currState, TI_UINT8 event, void* data)
{
TI_STATUS status;
TI_UINT8 nextState;
switchChannel_t *pSwitchChannel = (switchChannel_t*)data;
status = fsm_GetNextState(pSwitchChannel->pSwitchChannelSm, *currState, event, &nextState);
if (status != TI_OK)
{
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_ERROR, "switchChannel_smEvent, fsm_GetNextState error\n");
return(TI_NOK);
}
TRACE3(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smEvent: <currentState = %d, event = %d> --> nextState = %d\n", *currState, event, nextState);
status = fsm_Event(pSwitchChannel->pSwitchChannelSm, currState, event, (void *)pSwitchChannel);
if (status != TI_OK)
{
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_ERROR, "switchChannel_smEvent fsm_Event error\n");
TRACE3(pSwitchChannel->hReport, REPORT_SEVERITY_ERROR, "switchChannel_smEvent: <currentState = %d, event = %d> --> nextState = %d\n", *currState, event, nextState);
}
return status;
}
/************************************************************************
* switchChannel_smStart *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when the station becomes connected.
* update the current channel.
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smStart(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)pData;
paramInfo_t param;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
/* get the current channel number */
param.paramType = SITE_MGR_CURRENT_CHANNEL_PARAM;
siteMgr_getParam(pSwitchChannel->hSiteMgr, &param);
pSwitchChannel->currentChannel = param.content.siteMgrCurrentChannel;
TRACE1(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smStart, channelNo=%d\n", pSwitchChannel->currentChannel);
return TI_OK;
}
/************************************************************************
* switchChannel_smReqSCR_UpdateCmd *
************************************************************************/
/**
*
*
* \b Description:
*
* Update the Switch Channel command parameters.
* Request SCR and wait for SCR return.
* if tx status suspend
* update regulatory Domain
* update tx
* start periodic timer
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smReqSCR_UpdateCmd(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)pData;
EScrClientRequestStatus scrStatus;
EScePendReason scrPendReason;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE3(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smReqSCR_UpdateCmd, channelNo=%d, TBTT = %d, Mode = %d\n", pSwitchChannel->curChannelSwitchCmdParams.channelNumber, pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount, pSwitchChannel->curChannelSwitchCmdParams.channelSwitchMode);
/* Save the TS when requesting SCR */
pSwitchChannel->SCRRequestTimestamp = os_timeStampMs(pSwitchChannel->hOs);
scrStatus = scr_clientRequest(pSwitchChannel->hSCR, SCR_CID_SWITCH_CHANNEL,
SCR_RESOURCE_SERVING_CHANNEL, &scrPendReason);
if ((scrStatus != SCR_CRS_RUN) && (scrStatus != SCR_CRS_PEND))
{
TRACE1(pSwitchChannel->hReport, REPORT_SEVERITY_ERROR, "switchChannel_smReqSCR_UpdateCmd():Abort the switch channel, request Roaming, scrStatus=%d\n", scrStatus);
return (switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_SCR_FAIL, pSwitchChannel));
}
if (scrStatus == SCR_CRS_RUN)
{
switchChannel_scrStatusCB(pSwitchChannel, scrStatus, SCR_RESOURCE_SERVING_CHANNEL, scrPendReason);
}
else if ((scrPendReason==SCR_PR_OTHER_CLIENT_RUNNING) ||
(scrPendReason==SCR_PR_DIFFERENT_GROUP_RUNNING) )
{ /* No use to wait for the SCR, invoke FAIL */
return (switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_SCR_FAIL, pSwitchChannel));
}
/* wait for the SCR callback function to be called */
return TI_OK;
}
/************************************************************************
* switchChannel_scrStatusCB *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called by the SCR when:
* the resource is reserved for the SwitchChannel - SCR_CRS_RUN
* recovery occurred - SCR_CRS_ABORT
* other = ERROR
*
* \b ARGS:
*
* I - hSwitchChannel - pointer to the SwitchChannel SM context \n
* I - requestStatus - the SCR request status \n
* I - eResource - the resource for which the CB is issued \n
* I - pendReason - The SCR pend status in case of pend reply \n
*
* \b RETURNS:
*
* None.
*
*
*************************************************************************/
void switchChannel_scrStatusCB(TI_HANDLE hSwitchChannel, EScrClientRequestStatus requestStatus,
EScrResourceId eResource, EScePendReason pendReason )
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
switchChannel_smEvents scEvent;
if (pSwitchChannel == NULL)
{
return;
}
switch (requestStatus)
{
case SCR_CRS_RUN:
scEvent = SC_EVENT_SCR_RUN;
break;
case SCR_CRS_FW_RESET:
scEvent = SC_EVENT_FW_RESET;
break;
case SCR_CRS_PEND:
scEvent = SC_EVENT_SCR_FAIL;
break;
case SCR_CRS_ABORT:
default:
TRACE2(pSwitchChannel->hReport, REPORT_SEVERITY_ERROR, "switchChannel_scrStatusCB scrStatus = %d, pendReason=%d\n", requestStatus, pendReason);
scEvent = SC_EVENT_SCR_FAIL;
break;
}
switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, scEvent, pSwitchChannel);
}
/************************************************************************
* switchChannel_smStartSwitchChannelCmd *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called once SwitchChannel command was received and the SCR
* request returned with reason RUN.
* In this case perform the following:
* Set CMD to FW
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smStartSwitchChannelCmd(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)pData;
TSwitchChannelParams pSwitchChannelCmd;
TI_UINT32 switchChannelTimeDuration;
paramInfo_t param;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
param.paramType = SITE_MGR_BEACON_INTERVAL_PARAM;
siteMgr_getParam(pSwitchChannel->hSiteMgr, &param);
switchChannelTimeDuration = pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount * param.content.beaconInterval * 1024 / 1000;
if ( (switchChannelTimeDuration!=0) &&
((os_timeStampMs(pSwitchChannel->hOs) - pSwitchChannel->SCRRequestTimestamp) >= switchChannelTimeDuration ))
{ /* There's no time to perfrom the SCC, set the Count to 1 */
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount = 1;
}
apConn_indicateSwitchChannelInProgress(pSwitchChannel->hApConn);
pSwitchChannelCmd.channelNumber = pSwitchChannel->curChannelSwitchCmdParams.channelNumber;
pSwitchChannelCmd.switchTime = pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount;
pSwitchChannelCmd.txFlag = pSwitchChannel->curChannelSwitchCmdParams.channelSwitchMode;
pSwitchChannelCmd.flush = 0;
TWD_CmdSwitchChannel (pSwitchChannel->hTWD, &pSwitchChannelCmd);
TRACE4(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "TWD_CmdSwitchChannel:Set the cmd in HAL. Params:\n channelNumber=%d, switchTime=%d, txFlag=%d, flush=%d \n", pSwitchChannelCmd.channelNumber, pSwitchChannelCmd.switchTime, pSwitchChannelCmd.txFlag, pSwitchChannelCmd.flush);
return TI_OK;
}
/************************************************************************
* switchChannel_smFwResetWhileSCInProg *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when Switch Channel command is cancelled.
* In this case update TX nad regulatory Domain adn HAL.
* Release the SCR and exit PS.
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smFwResetWhileSCInProg(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)pData;
paramInfo_t param;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smFwResetWhileSCInProg \n");
/* Update new current channel */
param.paramType = SITE_MGR_CURRENT_CHANNEL_PARAM;
param.content.siteMgrCurrentChannel = pSwitchChannel->curChannelSwitchCmdParams.channelNumber;
siteMgr_setParam(pSwitchChannel->hSiteMgr, &param);
apConn_indicateSwitchChannelFinished(pSwitchChannel->hApConn);
switchChannel_zeroDatabase(pSwitchChannel);
/* release the SCR */
scr_clientComplete(pSwitchChannel->hSCR, SCR_CID_SWITCH_CHANNEL, SCR_RESOURCE_SERVING_CHANNEL);
return TI_OK;
}
/************************************************************************
* switchChannel_smSwitchChannelCmplt *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when SwitchChannel command completed in FW.
* In this case release SCR and update current channel.
* If TX was sus, it will be enabled only after first Beacon is recieved.
* Exit PS.
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smSwitchChannelCmplt(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)pData;
paramInfo_t param;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
/* Update new current channel */
param.paramType = SITE_MGR_CURRENT_CHANNEL_PARAM;
param.content.siteMgrCurrentChannel = pSwitchChannel->curChannelSwitchCmdParams.channelNumber;
siteMgr_setParam(pSwitchChannel->hSiteMgr, &param);
TRACE1(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smSwitchChannelCmplt, new channelNum = %d\n", pSwitchChannel->currentChannel);
apConn_indicateSwitchChannelFinished(pSwitchChannel->hApConn);
switchChannel_zeroDatabase(pSwitchChannel);
/* release the SCR */
scr_clientComplete(pSwitchChannel->hSCR, SCR_CID_SWITCH_CHANNEL, SCR_RESOURCE_SERVING_CHANNEL);
return TI_OK;
}
/************************************************************************
* switchChannel_smScrFailWhileWait4Scr *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when recovery occurred, while waiting for SCR due
* to previous switch channel command.
* Exit PS
* Release SCR.
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smScrFailWhileWait4Scr(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)pData;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smScrFailWhileWait4Scr\n");
switchChannel_zeroDatabase(pSwitchChannel);
/* release the SCR is not required !!! */
scr_clientComplete(pSwitchChannel->hSCR, SCR_CID_SWITCH_CHANNEL, SCR_RESOURCE_SERVING_CHANNEL);
return TI_OK;
}
/************************************************************************
* switchChannel_smStopWhileWait4Cmd *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when the station becomes Disconnected and the current
* state is Wait4Cmd. In this case perfrom:
* Stop the timer
* Enable TX if it was disabled
* Zero the current command parameters
* Stop the timer
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smStopWhileWait4Cmd(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)pData;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smStopWhileWait4Cmd\n");
switchChannel_zeroDatabase(pSwitchChannel);
return TI_OK;
}
/************************************************************************
* switchChannel_smStopWhileWait4Scr *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when the station becomes Disconnected and the current
* state is Wait4Scr. In this case perfrom:
* Stop the timer
* Enable TX if it was disabled
* Zero the current command parameters
* Complete SCR
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smStopWhileWait4Scr(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)pData;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smStopWhileWait4Scr\n");
switchChannel_zeroDatabase(pSwitchChannel);
/* release the SCR */
scr_clientComplete(pSwitchChannel->hSCR, SCR_CID_SWITCH_CHANNEL, SCR_RESOURCE_SERVING_CHANNEL);
return TI_OK;
}
/************************************************************************
* switchChannel_smStopWhileSwitchChannelInProg *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when the station becomes Disconnected and the current
* state is SwitchChannelInProg. In this case perfrom:
* Stop the timer
* Enable TX if it was disabled
* Zero the current command parameters
* resume self test
* Complete SCR
* Exit PS
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*************************************************************************/
static TI_STATUS switchChannel_smStopWhileSwitchChannelInProg(void *pData)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)pData;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_smStopWhileSwitchChannelInProg\n");
/* Exit PS */
/*PowerMgr_exitFromDriverMode(pSwitchChannel->hPowerMngr, "SwitchChannel");*/
apConn_indicateSwitchChannelFinished(pSwitchChannel->hApConn);
TWD_CmdSwitchChannelCancel (pSwitchChannel->hTWD, pSwitchChannel->currentChannel);
switchChannel_zeroDatabase(pSwitchChannel);
/* release the SCR */
scr_clientComplete(pSwitchChannel->hSCR, SCR_CID_SWITCH_CHANNEL, SCR_RESOURCE_SERVING_CHANNEL);
return TI_OK;
}
/************************************************************************
* switchChannel_zeroDatabase *
************************************************************************/
/**
*
*
* \b Description:
*
* This function is called when the SwitchChannel internal database should be zero.
* The following parameters are zerod:
* SwitchChannelChannelRange - the timestamps and validity state of channels
* curChannelSwitchCmdParams - the current switch channel command parameters
*
* \b ARGS:
*
* I - pSwitchChannel - pointer to the SwitchChannel SM context \n
* I - channelNum - channel number \n
* I - timestamp - required timestamp \n
*
* \b RETURNS:
*
* None.
*
*
*************************************************************************/
static void switchChannel_zeroDatabase(switchChannel_t *pSwitchChannel)
{
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_zeroDatabase\n");
pSwitchChannel->curChannelSwitchCmdParams.channelNumber = 0;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount = 0;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchMode = SC_SWITCH_CHANNEL_MODE_NOT_TX_SUS;
pSwitchChannel->currentChannel = 0;
}
/***********************************************************************
* release_module
***********************************************************************/
/*
DESCRIPTION: Called by the destroy function or by the create function (on failure)
Go over the vector, for each bit that is set, release the corresponding module.
INPUT: pSwitchChannel - SwitchChannel pointer.
initVec - Vector that contains a bit set for each module thah had been initiualized
OUTPUT:
RETURN: TI_OK on success, TI_NOK otherwise
************************************************************************/
static void release_module(switchChannel_t *pSwitchChannel, TI_UINT32 initVec)
{
if (pSwitchChannel == NULL)
{
return;
}
if (initVec & (1 << SC_SM_INIT_BIT))
{
fsm_Unload(pSwitchChannel->hOs, pSwitchChannel->pSwitchChannelSm);
}
if (initVec & (1 << SC_INIT_BIT))
{
os_memoryFree(pSwitchChannel->hOs, pSwitchChannel, sizeof(switchChannel_t));
}
initVec = 0;
}
/**
*
* switchChannel_smNop - Do nothing
*
* \b Description:
*
* Do nothing in the SM.
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*/
static TI_STATUS switchChannel_smNop(void *pData)
{
switchChannel_t *pSwitchChannel;
pSwitchChannel = (switchChannel_t*)pData;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE0(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, " switchChannel_smNop\n");
return TI_OK;
}
/**
*
* switchChannel_smUnexpected - Unexpected event
*
* \b Description:
*
* Unexpected event in the SM.
*
* \b ARGS:
*
* I - pData - pointer to the SwitchChannel SM context \n
*
* \b RETURNS:
*
* TI_OK if successful, TI_NOK otherwise.
*
*
*/
static TI_STATUS switchChannel_smUnexpected(void *pData)
{
switchChannel_t *pSwitchChannel;
pSwitchChannel = (switchChannel_t*)pData;
if (pSwitchChannel == NULL)
{
return TI_NOK;
}
TRACE1(pSwitchChannel->hReport, REPORT_SEVERITY_ERROR, " switchChannel_smUnexpected, state = %d\n", pSwitchChannel->currentState);
return TI_NOK;
}
/*******************************************************************************
*********** Debug functions ***********
*******************************************************************************/
#ifdef TI_DBG
/************************************************************************
* switchChannel_recvCmd *
************************************************************************/
/*DESCRIPTION: This function is called by MLME Parser upon receiving of
Beacon, Probe Response or Action with Switch Channel command,
or beacon/
performs the following:
- Initializes the switching channel procedure.
- Setting timer to the actual switching time(if needed)
INPUT: hSwitchChannel - SwitchChannel handle.
switchMode - indicates whether to stop transmission
until the scheduled channel switch.
newChannelNum - indicates the number of the new channel.
durationTime - indicates the time (expressed in ms) until
the scheduled channel switch should accure.
OUTPUT: None
RETURN: TI_OK on success, TI_NOK otherwise
************************************************************************/
static void switchChannel_recvCmd4Debug(TI_HANDLE hSwitchChannel, dot11_CHANNEL_SWITCH_t *channelSwitch, TI_BOOL BeaconPacket, TI_UINT8 channel)
{
switchChannel_t *pSwitchChannel = (switchChannel_t *)hSwitchChannel;
paramInfo_t param;
if (pSwitchChannel==NULL)
{
return;
}
/* The following is for debug purposes only
It will be operated when the Switch Channel cmd is opertated from debug CLI */
if (pSwitchChannel->ignoreCancelSwitchChannelCmd != 0)
{
if (pSwitchChannel->ignoreCancelSwitchChannelCmd == 1)
{
/* update the new SCC params */
pSwitchChannel->curChannelSwitchCmdParams.channelNumber = channelSwitch->channelNumber;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount = channelSwitch->channelSwitchCount;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchMode = channelSwitch->channelSwitchMode;
pSwitchChannel->ignoreCancelSwitchChannelCmd = 2;
}
else if (channelSwitch->channelSwitchCount>0)
{
channelSwitch->channelSwitchCount --;
}
else
{
pSwitchChannel->ignoreCancelSwitchChannelCmd = 0;
}
/* search in the buffer pointer to the beginning of the
Switch Cahnnel Announcement IE according to the IE ID */
/* SC IE exists on the serving channel */
TRACE3(pSwitchChannel->hReport, REPORT_SEVERITY_INFORMATION, "switchChannel_recvFrame, SwitchChannel cmd was found, channel no=%d, mode=%d, TBTT=%d \n", channelSwitch->channelNumber, channelSwitch->channelSwitchMode, channelSwitch->channelSwitchCount);
/* Checking channel number validity */
param.content.channel = channelSwitch->channelNumber;
param.paramType = REGULATORY_DOMAIN_IS_CHANNEL_SUPPORTED;
regulatoryDomain_getParam(pSwitchChannel->hRegulatoryDomain,&param);
if (( !param.content.bIsChannelSupprted ) ||
(channelSwitch->channelSwitchCount == 0) ||
(channelSwitch->channelSwitchMode == SC_SWITCH_CHANNEL_MODE_TX_SUS))
{ /* Trigger Roaming, if TX mode is disabled, the new channel number is invalid,
or the TBTT count is 0 */
apConn_reportRoamingEvent(pSwitchChannel->hApConn, ROAMING_TRIGGER_SWITCH_CHANNEL, NULL);
}
else
{ /* Invoke Switch Channel command */
/* update the new SCC params */
pSwitchChannel->curChannelSwitchCmdParams.channelNumber = channelSwitch->channelNumber;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchCount = channelSwitch->channelSwitchCount;
pSwitchChannel->curChannelSwitchCmdParams.channelSwitchMode = channelSwitch->channelSwitchMode;
switchChannel_smEvent((TI_UINT8*)&pSwitchChannel->currentState, SC_EVENT_SC_CMD, pSwitchChannel);
}
}
}
void switchChannelDebug_setCmdParams(TI_HANDLE hSwitchChannel, SC_switchChannelCmdParam_e switchChannelCmdParam, TI_UINT8 param)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
if (pSwitchChannel == NULL)
{
return;
}
switch (switchChannelCmdParam)
{
case SC_SWITCH_CHANNEL_NUM:
WLAN_OS_REPORT(("SwitchChannelDebug_setSwitchChannelCmdParams, channelNum=%d \n ", param));
pSwitchChannel->debugChannelSwitchCmdParams.channelNumber = param;
break;
case SC_SWITCH_CHANNEL_TBTT:
WLAN_OS_REPORT(("SwitchChannelDebug_setSwitchChannelCmdParams, channelSwitchCount=%d \n ", param));
pSwitchChannel->debugChannelSwitchCmdParams.channelSwitchCount = param;
break;
case SC_SWITCH_CHANNEL_MODE:
WLAN_OS_REPORT(("SwitchChannelDebug_setSwitchChannelCmdParams, channelSwitchMode=%d \n ", param));
pSwitchChannel->debugChannelSwitchCmdParams.channelSwitchMode = param;
break;
default:
WLAN_OS_REPORT(("ERROR: SwitchChannelDebug_setSwitchChannelCmdParams, wrong switchChannelCmdParam=%d \n ",
switchChannelCmdParam));
break;
}
}
void switchChannelDebug_SwitchChannelCmdTest(TI_HANDLE hSwitchChannel, TI_BOOL BeaconPacket)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
if (pSwitchChannel == NULL)
{
return;
}
WLAN_OS_REPORT(("SwitchChannelDebug_SwitchChannelCmdTest, BeaconPacket=%d \n cmd params: channelNumber=%d, channelSwitchCount=%d, channelSwitchMode=%d \n",
BeaconPacket,
pSwitchChannel->debugChannelSwitchCmdParams.channelNumber,
pSwitchChannel->debugChannelSwitchCmdParams.channelSwitchCount,
pSwitchChannel->debugChannelSwitchCmdParams.channelSwitchMode));
pSwitchChannel->ignoreCancelSwitchChannelCmd= 1;
switchChannel_recvCmd4Debug(hSwitchChannel, &pSwitchChannel->debugChannelSwitchCmdParams, BeaconPacket, pSwitchChannel->currentChannel);
}
void switchChannelDebug_CancelSwitchChannelCmdTest(TI_HANDLE hSwitchChannel, TI_BOOL BeaconPacket)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
if (pSwitchChannel == NULL)
{
return;
}
WLAN_OS_REPORT(("SwitchChannelDebug_SwitchChannelCmdTest, BeaconPacket=%d \n",BeaconPacket));
pSwitchChannel->ignoreCancelSwitchChannelCmd= 0;
switchChannel_recvCmd4Debug(hSwitchChannel, NULL, BeaconPacket, pSwitchChannel->currentChannel);
}
void switchChannelDebug_printStatus(TI_HANDLE hSwitchChannel)
{
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
if (pSwitchChannel == NULL)
{
return;
}
WLAN_OS_REPORT(("SwitchChannel debug params are: channelNumber=%d, channelSwitchCount=%d , channelSwitchMode=%d \n",
pSwitchChannel->debugChannelSwitchCmdParams.channelNumber,
pSwitchChannel->debugChannelSwitchCmdParams.channelSwitchCount,
pSwitchChannel->debugChannelSwitchCmdParams.channelSwitchMode));
WLAN_OS_REPORT(("SwitchChannel state=%d, currentChannel=%d \n", pSwitchChannel->currentState, pSwitchChannel->currentChannel));
}
void switchChannelDebug_setChannelValidity(TI_HANDLE hSwitchChannel, TI_UINT8 channelNum, TI_BOOL validity)
{
paramInfo_t param;
switchChannel_t *pSwitchChannel = (switchChannel_t*)hSwitchChannel;
if (pSwitchChannel == NULL)
{
return;
}
param.paramType = REGULATORY_DOMAIN_SET_CHANNEL_VALIDITY;
param.content.channelValidity.channelNum = channelNum;
param.content.channelValidity.channelValidity = validity;
regulatoryDomain_setParam(pSwitchChannel->hRegulatoryDomain, &param);
}
#endif /* TI_DBG */