Google Git
Sign in
android / platform / hardware / ti / wlan / cece92a8acff0a81868e6cac326bcf61e54c5aec / . / wl1271 / stad / src / Sta_Management / PowerMgr.c
blob: 117820c0830431f9abd60cbdf3d1f0e3ae767f22 [file] [log] [blame]
/*
* PowerMgr.c
*
* Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Texas Instruments nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** \file PowerMgr.c
* \brief This is the PowerMgr module implementation.
* \
* \date 24-Oct-2005
*/
/****************************************************************************
* *
* MODULE: PowerMgr *
* PURPOSE: PowerMgr Module implementation. *
* *
****************************************************************************/
#define __FILE_ID__ FILE_ID_71
#include "tidef.h"
#include "osApi.h"
#include "timer.h"
#include "paramOut.h"
#include "report.h"
#include "PowerMgr.h"
#include "PowerMgr_API.h"
#include "TrafficMonitorAPI.h"
#include "qosMngr_API.h"
#include "siteMgrApi.h"
#include "TWDriver.h"
#include "SoftGeminiApi.h"
#include "DrvMainModules.h"
#include "PowerMgrKeepAlive.h"
#include "CmdBld.h"
/*****************************************************************************
** Defines **
*****************************************************************************/
#define DEFAULT_LISTEN_INTERVAL (1)
#define BET_DISABLE 0
#define BET_ENABLE 1
/*****************************************************************************
** Private Function prototypes **
*****************************************************************************/
static void powerSaveCompleteCB(TI_HANDLE hPowerMgr,TI_UINT8 PSMode,TI_UINT8 transStatus);
static void PowerMgrTMThresholdCrossCB( TI_HANDLE hPowerMgr, TI_UINT32 cookie );
static void powerMgrDisableThresholdsIndications(TI_HANDLE hPowerMgr);
static void powerMgrEnableThresholdsIndications(TI_HANDLE hPowerMgr);
static void powerMgrStartAutoPowerMode(TI_HANDLE hPowerMgr);
static void powerMgrRetryPsTimeout(TI_HANDLE hPowerMgr, TI_BOOL bTwdInitOccured);
static void powerMgrPowerProfileConfiguration(TI_HANDLE hPowerMgr, PowerMgr_PowerMode_e desiredPowerMode);
static void PowerMgr_setDozeModeInAuto(TI_HANDLE hPowerMgr,PowerMgr_PowerMode_e dozeMode);
static void PowerMgrConfigBetToFw( TI_HANDLE hPowerMgr, TI_UINT32 cookie );
static void PowerMgr_PsPollFailureCB( TI_HANDLE hPowerMgr );
static void powerMgr_PsPollFailureTimeout( TI_HANDLE hPowerMgr, TI_BOOL bTwdInitOccured );
static void powerMgr_SGSetUserDesiredwakeUpCond( TI_HANDLE hPowerMgr );
static TI_STATUS powerMgrSendMBXWakeUpConditions(TI_HANDLE hPowerMgr,TI_UINT8 listenInterval, ETnetWakeOn tnetWakeupOn);
static TI_STATUS powerMgrNullPacketRateConfiguration(TI_HANDLE hPowerMgr);
static PowerMgr_PowerMode_e powerMgrGetHighestPriority(TI_HANDLE hPowerMgr);
/*****************************************************************************
** Public Function prototypes **
*****************************************************************************/
/****************************************************************************************
* PowerMgr_create *
****************************************************************************************
DESCRIPTION: Creates the object of the power Manager.
performs the following:
- Allocate the Power Manager handle
- Creates the retry timer
INPUT: - hOs - Handle to OS
OUTPUT:
RETURN: Handle to the Power Manager module on success, NULL otherwise
****************************************************************************************/
TI_HANDLE PowerMgr_create(TI_HANDLE hOs)
{
PowerMgr_t * pPowerMgr = NULL;
pPowerMgr = (PowerMgr_t*) os_memoryAlloc (hOs, sizeof(PowerMgr_t));
if ( pPowerMgr == NULL )
{
WLAN_OS_REPORT(("PowerMgr_create - Memory Allocation Error!\n"));
return NULL;
}
os_memoryZero (hOs, pPowerMgr, sizeof(PowerMgr_t));
pPowerMgr->hOS = hOs;
/* create the power manager keep-alive sub module */
pPowerMgr->hPowerMgrKeepAlive = powerMgrKL_create (hOs);
return pPowerMgr;
}
/****************************************************************************************
* powerSrv_destroy *
****************************************************************************************
DESCRIPTION: Destroy the object of the power Manager.
- delete Power Manager alocation
- call the destroy function of the timer
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: TI_STATUS - TI_OK on success else TI_NOK.
****************************************************************************************/
TI_STATUS PowerMgr_destroy(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
/* destroy the power manager keep-alive sub module */
powerMgrKL_destroy (pPowerMgr->hPowerMgrKeepAlive);
if (pPowerMgr->hRetryPsTimer)
{
tmr_DestroyTimer (pPowerMgr->hRetryPsTimer);
}
if ( pPowerMgr->hPsPollFailureTimer != NULL )
{
tmr_DestroyTimer(pPowerMgr->hPsPollFailureTimer);
}
os_memoryFree(pPowerMgr->hOS, pPowerMgr, sizeof(PowerMgr_t));
return TI_OK;
}
/****************************************************************************************
* PowerMgr_init *
****************************************************************************************
DESCRIPTION: Power Manager init function, called in init phase.
INPUT: pStadHandles - The driver modules handles
OUTPUT:
RETURN: void
****************************************************************************************/
void PowerMgr_init (TStadHandlesList *pStadHandles)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)(pStadHandles->hPowerMgr);
pPowerMgr->hReport = pStadHandles->hReport;
pPowerMgr->hTrafficMonitor = pStadHandles->hTrafficMon;
pPowerMgr->hSiteMgr = pStadHandles->hSiteMgr;
pPowerMgr->hTWD = pStadHandles->hTWD;
pPowerMgr->hSoftGemini = pStadHandles->hSoftGemini;
pPowerMgr->hTimer = pStadHandles->hTimer;
pPowerMgr->psEnable = TI_FALSE;
/* initialize the power manager keep-alive sub module */
powerMgrKL_init (pPowerMgr->hPowerMgrKeepAlive, pStadHandles);
}
TI_STATUS PowerMgr_SetDefaults (TI_HANDLE hPowerMgr, PowerMgrInitParams_t* pPowerMgrInitParams)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TI_UINT8 index;
/* used to initialize the Traffic Monitor for Auto Ps events */
TrafficAlertRegParm_t tmRegParam;
TI_STATUS status;
pPowerMgr->reAuthActivePriority = pPowerMgrInitParams->reAuthActivePriority;
/* init power management options */
pPowerMgr->beaconListenInterval = pPowerMgrInitParams->beaconListenInterval;
pPowerMgr->dtimListenInterval = pPowerMgrInitParams->dtimListenInterval;
pPowerMgr->defaultPowerLevel = pPowerMgrInitParams->defaultPowerLevel;
pPowerMgr->PowerSavePowerLevel = pPowerMgrInitParams->PowerSavePowerLevel;
pPowerMgr->powerMngPriority = POWER_MANAGER_USER_PRIORITY;
pPowerMgr->maxFullBeaconInterval = pPowerMgrInitParams->MaximalFullBeaconReceptionInterval;
pPowerMgr->PsPollDeliveryFailureRecoveryPeriod = pPowerMgrInitParams->PsPollDeliveryFailureRecoveryPeriod;
/*
set AUTO PS parameters
*/
pPowerMgr->autoModeInterval = pPowerMgrInitParams->autoModeInterval;
pPowerMgr->autoModeActiveTH = pPowerMgrInitParams->autoModeActiveTH;
pPowerMgr->autoModeDozeTH = pPowerMgrInitParams->autoModeDozeTH;
pPowerMgr->autoModeDozeMode = pPowerMgrInitParams->autoModeDozeMode;
/*
register threshold in the traffic monitor.
*/
pPowerMgr->betEnable = pPowerMgrInitParams->BetEnable; /* save BET enable flag for CLI configuration */
pPowerMgr->betTrafficEnable = TI_FALSE; /* starting without BET */
/* BET thresholds */
/* general parameters */
tmRegParam.Context = pPowerMgr;
tmRegParam.TimeIntervalMs = BET_INTERVAL_VALUE;
tmRegParam.Trigger = TRAFF_EDGE;
tmRegParam.MonitorType = TX_RX_ALL_802_11_DATA_FRAMES;
tmRegParam.CallBack = PowerMgrConfigBetToFw;
/* BET enable event */
tmRegParam.Direction = TRAFF_DOWN;
tmRegParam.Threshold = pPowerMgrInitParams->BetEnableThreshold;
pPowerMgr->BetEnableThreshold = pPowerMgrInitParams->BetEnableThreshold;
tmRegParam.Cookie = (TI_UINT32)BET_ENABLE;
pPowerMgr->betEnableTMEvent = TrafficMonitor_RegEvent (pPowerMgr->hTrafficMonitor,
&tmRegParam,
TI_FALSE);
/* BET disable event */
tmRegParam.Direction = TRAFF_UP;
tmRegParam.Threshold = pPowerMgrInitParams->BetDisableThreshold;
pPowerMgr->BetDisableThreshold = pPowerMgrInitParams->BetDisableThreshold;
tmRegParam.Cookie = (TI_UINT32)BET_DISABLE;
pPowerMgr->betDisableTMEvent = TrafficMonitor_RegEvent (pPowerMgr->hTrafficMonitor,
&tmRegParam,
TI_FALSE);
if ( (pPowerMgr->betDisableTMEvent == NULL) ||
(pPowerMgr->betEnableTMEvent == NULL))
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INIT, "PowerMgr_init - TM - ERROR registering BET events - ABROTING init!\n");
return TI_NOK;
}
/*
set the events as resets for one another
*/
status = TrafficMonitor_SetRstCondition (pPowerMgr->hTrafficMonitor,
pPowerMgr->betDisableTMEvent,
pPowerMgr->betEnableTMEvent,
TI_TRUE);
if ( status != TI_OK )
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INIT, "PowerMgr_init - PowerMgr_init - ERROR binding BET events - ABROTING init!\n");
return TI_NOK;
}
/* general parameters */
tmRegParam.Context = pPowerMgr;
tmRegParam.Cookie = (TI_UINT32)POWER_MODE_ACTIVE;
tmRegParam.TimeIntervalMs = pPowerMgr->autoModeInterval;
tmRegParam.Trigger = TRAFF_EDGE;
tmRegParam.MonitorType = TX_RX_ALL_802_11_DATA_FRAMES;
/* Active threshold */
tmRegParam.CallBack = PowerMgrTMThresholdCrossCB;
tmRegParam.Direction = TRAFF_UP;
tmRegParam.Threshold = pPowerMgr->autoModeActiveTH;
pPowerMgr->passToActiveTMEvent = TrafficMonitor_RegEvent (pPowerMgr->hTrafficMonitor,
&tmRegParam,
TI_FALSE);
/* Doze threshold */
tmRegParam.Direction = TRAFF_DOWN;
tmRegParam.Threshold = pPowerMgr->autoModeDozeTH;
tmRegParam.Cookie = (TI_UINT32)POWER_MODE_SHORT_DOZE; /* diffrentiation between long / short doze is done at the
CB, according to configuration at time of CB invokation */
pPowerMgr->passToDozeTMEvent = TrafficMonitor_RegEvent (pPowerMgr->hTrafficMonitor,
&tmRegParam,
TI_FALSE);
if ( (pPowerMgr->passToActiveTMEvent == NULL) ||
(pPowerMgr->passToDozeTMEvent == NULL))
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INIT, "PowerMgr_init - PowerMgr_init - ERROR registering Auto mode events - ABROTING init!\n");
return TI_NOK;
}
/*
set the events as resets for one another
*/
status = TrafficMonitor_SetRstCondition (pPowerMgr->hTrafficMonitor,
pPowerMgr->passToActiveTMEvent,
pPowerMgr->passToDozeTMEvent,
TI_TRUE);
if ( status != TI_OK )
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INIT, "PowerMgr_init - PowerMgr_init - ERROR binding Auto mode events - ABROTING init!\n");
return TI_NOK;
}
/*
configure the initialize power mode
*/
pPowerMgr->desiredPowerModeProfile = pPowerMgrInitParams->powerMode;
for ( index = 0;index < POWER_MANAGER_MAX_PRIORITY;index++ )
{
pPowerMgr->powerMngModePriority[index].powerMode = pPowerMgr->desiredPowerModeProfile;
pPowerMgr->powerMngModePriority[index].priorityEnable = TI_FALSE;
}
pPowerMgr->powerMngModePriority[POWER_MANAGER_USER_PRIORITY].priorityEnable = TI_TRUE;
if (pPowerMgr->reAuthActivePriority)
pPowerMgr->powerMngModePriority[POWER_MANAGER_REAUTH_PRIORITY].powerMode = POWER_MODE_ACTIVE;
/* set the defualt power policy */
TWD_CfgSleepAuth (pPowerMgr->hTWD, pPowerMgr->defaultPowerLevel);
/*create the timers */
pPowerMgr->hRetryPsTimer = tmr_CreateTimer(pPowerMgr->hTimer);
pPowerMgr->hPsPollFailureTimer = tmr_CreateTimer(pPowerMgr->hTimer);
if ( (pPowerMgr->hPsPollFailureTimer == NULL) || (pPowerMgr->hRetryPsTimer == NULL))
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INIT, "PowerMgr_SetDefaults - ERROR creating timers - ABROTING init!\n");
return TI_NOK;
}
/* Register and Enable the PsPoll failure */
TWD_RegisterEvent (pPowerMgr->hTWD,
TWD_OWN_EVENT_PSPOLL_DELIVERY_FAILURE,
(void *)PowerMgr_PsPollFailureCB,
hPowerMgr);
TWD_EnableEvent (pPowerMgr->hTWD, TWD_OWN_EVENT_PSPOLL_DELIVERY_FAILURE);
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INIT, "PowerMgr_init - PowerMgr Initialized\n");
/* set defaults for the power manager keep-alive sub module */
powerMgrKL_setDefaults (pPowerMgr->hPowerMgrKeepAlive);
return TI_OK;
}
/****************************************************************************************
* PowerMgr_startPS *
****************************************************************************************
DESCRIPTION: Start the power save algorithm of the driver and also the 802.11 PS.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: TI_STATUS - TI_OK or PENDING on success else TI_NOK.\n
****************************************************************************************/
TI_STATUS PowerMgr_startPS(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
int frameCount;
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgr_startPS - called\n");
if ( pPowerMgr->psEnable == TI_TRUE )
{
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "PowerMgr_startPS - PS mechanism is already Enable! Aborting psEnable=%d !\n", pPowerMgr->psEnable);
/*
this is a FATAL ERROR of the power manager!
already enable power-save! thus return TI_OK, but there is an error in the upper
layer that call tp PowerMgr_startPS() twice - should know that power-save
is already enable therefor print the Error message.
or
the state machine while NOT in PS can be only in ACTIVE state and in some cases in
PS_PENDING state. therefore the state machine is out of sync from it logic!
*/
return TI_OK;
}
pPowerMgr->psEnable = TI_TRUE;
/*set the correct rate after connection*/
powerMgrNullPacketRateConfiguration(hPowerMgr);
/*
if in auto mode then need to refer to the threshold cross indication from the traffic monitor,
else it need to refer to the configured power mode profile from the user.
*/
pPowerMgr->desiredPowerModeProfile = powerMgrGetHighestPriority(hPowerMgr);
if ( pPowerMgr->desiredPowerModeProfile == POWER_MODE_AUTO )
{
powerMgrStartAutoPowerMode(hPowerMgr);
}
else /*not auto mode - according to the current profle*/
{
powerMgrPowerProfileConfiguration(hPowerMgr, pPowerMgr->desiredPowerModeProfile);
}
TWD_CfgSleepAuth (pPowerMgr->hTWD, pPowerMgr->PowerSavePowerLevel);
if ((pPowerMgr->betEnable)&&( pPowerMgr->desiredPowerModeProfile != POWER_MODE_ACTIVE ))
{
TrafficMonitor_StartEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->betEnableTMEvent);
TrafficMonitor_StartEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->betDisableTMEvent);
frameCount = TrafficMonitor_GetFrameBandwidth(pPowerMgr->hTrafficMonitor);
if (frameCount < pPowerMgr->BetEnableThreshold)
{
pPowerMgr->betTrafficEnable = TI_TRUE;
}
else if (frameCount > pPowerMgr->BetDisableThreshold)
{
pPowerMgr->betTrafficEnable = TI_FALSE;
}
PowerMgrConfigBetToFw(hPowerMgr,pPowerMgr->betTrafficEnable);
}
/* also start the power manager keep-alive sub module */
powerMgrKL_start (pPowerMgr->hPowerMgrKeepAlive);
return TI_OK;
}
/****************************************************************************************
* PowerMgr_stopPS *
****************************************************************************************
DESCRIPTION: Stop the power save algorithm of the driver and also the 802.11 PS.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: TI_STATUS - TI_OK or PENDING on success else TI_NOK.\n
****************************************************************************************/
TI_STATUS PowerMgr_stopPS(TI_HANDLE hPowerMgr, TI_BOOL bDisconnect)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
/*TI_STATUS status;*/
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgr_stopPS - called\n");
if ( pPowerMgr->psEnable == TI_FALSE )
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgr_stopPS - PS is already Disable! Aborting!\n");
/*
Print Info message incase callng PowerMgr_stopPS() more than once in a row, without
calling to PowerMgr_startPS() in the middle.
this will return with TI_OK and not doing the Stop action!
*/
return TI_OK;
}
pPowerMgr->psEnable = TI_FALSE;
tmr_StopTimer (pPowerMgr->hRetryPsTimer);
/* Check if PsPoll work-around is currently enabled */
if ( pPowerMgr->powerMngModePriority[POWER_MANAGER_PS_POLL_FAILURE_PRIORITY].priorityEnable == TI_TRUE)
{
tmr_StopTimer(pPowerMgr->hPsPollFailureTimer);
/* Exit the PsPoll work-around */
powerMgr_PsPollFailureTimeout( hPowerMgr, TI_FALSE );
}
if ( pPowerMgr->desiredPowerModeProfile == POWER_MODE_AUTO )
{
powerMgrDisableThresholdsIndications(hPowerMgr);
}
TWD_SetPsMode (pPowerMgr->hTWD, POWER_SAVE_OFF, TI_FALSE, NULL, NULL, NULL);
/* set the power policy of the system */
TWD_CfgSleepAuth (pPowerMgr->hTWD, pPowerMgr->defaultPowerLevel);
if ((pPowerMgr->betEnable)&&( pPowerMgr->desiredPowerModeProfile != POWER_MODE_ACTIVE ))
{
TrafficMonitor_StopEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->betEnableTMEvent);
TrafficMonitor_StopEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->betDisableTMEvent);
}
/* also stop the power manager keep-alive sub module */
powerMgrKL_stop (pPowerMgr->hPowerMgrKeepAlive, bDisconnect);
return TI_OK;
}
/****************************************************************************************
* PowerMgr_getPsStatus *
****************************************************************************************
DESCRIPTION: returns the 802.11 power save status (enable / disable).
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: TI_BOOL - TI_TRUE if enable else TI_FALSE.\n
****************************************************************************************/
TI_BOOL PowerMgr_getPsStatus(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
return TWD_GetPsStatus (pPowerMgr->hTWD);
}
/****************************************************************************************
* PowerMgr_setPowerMode *
****************************************************************************************
DESCRIPTION: Configure of the PowerMode profile (auto / active / short doze / long doze).
INPUT: - hPowerMgr - Handle to the Power Manager
- thePowerMode - the requested power mode (auto / active / short doze / long doze).
OUTPUT:
RETURN: TI_STATUS - TI_OK on success else TI_NOK.\n
****************************************************************************************/
TI_STATUS PowerMgr_setPowerMode(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
PowerMgr_PowerMode_e powerMode;
/*in this way we will run with the highest priority that is enabled*/
powerMode = powerMgrGetHighestPriority(hPowerMgr);
/* sanity checking */
if ( powerMode >= POWER_MODE_MAX)
{
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "PowerMgr_setPowerMode - unknown parameter: %d\n", powerMode);
return TI_NOK;
}
TRACE1( pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgr_setPowerMode, power mode = %d\n", powerMode);
if ( pPowerMgr->desiredPowerModeProfile != powerMode )
{
PowerMgr_PowerMode_e previousPowerModeProfile;
previousPowerModeProfile = pPowerMgr->desiredPowerModeProfile;
pPowerMgr->desiredPowerModeProfile = powerMode;
if ( pPowerMgr->desiredPowerModeProfile == POWER_MODE_AUTO )
{
if ( pPowerMgr->psEnable == TI_TRUE )
{
powerMgrStartAutoPowerMode(hPowerMgr);
}
/*
the transitions of state will be done according to the events from the
traffic monitor - therefor abort and wait event from the traffic monitor.
*/
return TI_OK;
}
else if ( previousPowerModeProfile == POWER_MODE_AUTO )
{
/*
if the old power mode is AUTO and the new power mode is NOT then need
to disable the thresholds indications from the traffic monitor.
*/
powerMgrDisableThresholdsIndications(hPowerMgr);
}
if ( pPowerMgr->psEnable == TI_TRUE )
{
powerMgrPowerProfileConfiguration(hPowerMgr, powerMode);
}
}
else
{
/*
the power mode is already configure to the module - don't need to do anything!
*/
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_WARNING, "PowerMgr_setPowerMode - desiredPowerModeProfile == thePowerMode (=%d), ABORTING!\n", powerMode);
}
return TI_OK;
}
/****************************************************************************************
* PowerMgr_setDozeModeInAuto *
****************************************************************************************
DESCRIPTION: Configure the doze mode (short-doze / long-doze) that auto mode will toggle between doze vs active.
INPUT: - hPowerMgr - Handle to the Power Manager
- dozeMode - the requested doze mode when Mgr is in Auto mode (short-doze / long-doze)
OUTPUT:
RETURN:
****************************************************************************************/
void PowerMgr_setDozeModeInAuto(TI_HANDLE hPowerMgr, PowerMgr_PowerMode_e dozeMode)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
PowerMgr_PowerMode_e powerMode = powerMgrGetHighestPriority(hPowerMgr);
/* check if we are trying to configure the same Doze mode */
if ( dozeMode != pPowerMgr->autoModeDozeMode )
{
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgr_setDozeModeInAuto - autoModeDozeMode == %d \n", dozeMode);
pPowerMgr->autoModeDozeMode = dozeMode;
/* in case we are already in Auto mode, we have to set the wake up condition MIB */
if ( powerMode == POWER_MODE_AUTO )
{
if ( dozeMode == POWER_MODE_SHORT_DOZE )
{
if ( pPowerMgr->beaconListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_N_BEACON);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_BEACON);
}
}
else /* POWER_MODE_LONG_DOZE */
{
if ( pPowerMgr->dtimListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_N_DTIM);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_DTIM);
}
}
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgr_setDozeModeInAuto - already in Auto\n");
}
}
else
{
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_WARNING, "PowerMgr_setDozeModeInAuto - autoModeDozeMode == %d (same same ...)\n", dozeMode);
}
}
/****************************************************************************************
* PowerMgr_getPowerMode *
****************************************************************************************
DESCRIPTION: Get the current PowerMode of the PowerMgr module.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: PowerMgr_PowerMode_e - (auto / active / short doze / long doze).\n
****************************************************************************************/
PowerMgr_PowerMode_e PowerMgr_getPowerMode(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
return pPowerMgr->desiredPowerModeProfile;
}
TI_STATUS powerMgr_setParam(TI_HANDLE thePowerMgrHandle,
paramInfo_t *theParamP)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)thePowerMgrHandle;
switch ( theParamP->paramType )
{
case POWER_MGR_POWER_MODE:
pPowerMgr->powerMngModePriority[theParamP->content.powerMngPowerMode.PowerMngPriority].powerMode
= theParamP->content.powerMngPowerMode.PowerMode;
PowerMgr_setPowerMode(thePowerMgrHandle);
if (pPowerMgr->betEnable)
PowerMgrConfigBetToFw(thePowerMgrHandle, pPowerMgr->betEnable );
break;
case POWER_MGR_DISABLE_PRIORITY:
pPowerMgr->powerMngModePriority[theParamP->content.powerMngPriority].priorityEnable = TI_FALSE;
PowerMgr_setPowerMode(thePowerMgrHandle);
break;
case POWER_MGR_ENABLE_PRIORITY:
pPowerMgr->powerMngModePriority[theParamP->content.powerMngPriority].priorityEnable = TI_TRUE;
PowerMgr_setPowerMode(thePowerMgrHandle);
break;
case POWER_MGR_POWER_LEVEL_PS:
pPowerMgr->PowerSavePowerLevel = theParamP->content.PowerSavePowerLevel;
/* If we are connected, config the new power level (this param is for connected state) */
if (pPowerMgr->psEnable)
{
TWD_CfgSleepAuth (pPowerMgr->hTWD, pPowerMgr->PowerSavePowerLevel);
}
break;
case POWER_MGR_POWER_LEVEL_DEFAULT:
pPowerMgr->defaultPowerLevel = theParamP->content.DefaultPowerLevel;
/* If we are NOT connected, config the new power level (this param is for disconnected state) */
if (!pPowerMgr->psEnable)
{
TWD_CfgSleepAuth (pPowerMgr->hTWD, pPowerMgr->defaultPowerLevel);
}
break;
case POWER_MGR_POWER_LEVEL_DOZE_MODE:
PowerMgr_setDozeModeInAuto(thePowerMgrHandle,theParamP->content.powerMngDozeMode);
if (pPowerMgr->betEnable)
PowerMgrConfigBetToFw(thePowerMgrHandle, pPowerMgr->betEnable );
break;
case POWER_MGR_KEEP_ALIVE_ENA_DIS:
case POWER_MGR_KEEP_ALIVE_ADD_REM:
return powerMgrKL_setParam (pPowerMgr->hPowerMgrKeepAlive, theParamP);
default:
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "PowerMgr_setParam - ERROR - Param is not supported, %d\n\n", theParamP->paramType);
return PARAM_NOT_SUPPORTED;
}
return TI_OK;
}
TI_STATUS powerMgr_getParam(TI_HANDLE thePowerMgrHandle,
paramInfo_t *theParamP)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)thePowerMgrHandle;
switch ( theParamP->paramType )
{
case POWER_MGR_POWER_MODE:
theParamP->content.PowerMode = PowerMgr_getPowerMode(thePowerMgrHandle);
break;
case POWER_MGR_POWER_LEVEL_PS:
theParamP->content.PowerSavePowerLevel = pPowerMgr->PowerSavePowerLevel;
break;
case POWER_MGR_POWER_LEVEL_DEFAULT:
theParamP->content.DefaultPowerLevel = pPowerMgr->defaultPowerLevel;
break;
case POWER_MGR_POWER_LEVEL_DOZE_MODE:
theParamP->content.powerMngDozeMode = pPowerMgr->autoModeDozeMode;
break;
case POWER_MGR_KEEP_ALIVE_GET_CONFIG:
return powerMgrKL_getParam (pPowerMgr->hPowerMgrKeepAlive, theParamP);
case POWER_MGR_GET_POWER_CONSUMPTION_STATISTICS:
return cmdBld_ItrPowerConsumptionstat (pPowerMgr->hTWD,
theParamP->content.interogateCmdCBParams.fCb,
theParamP->content.interogateCmdCBParams.hCb,
(void*)theParamP->content.interogateCmdCBParams.pCb);
default:
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "PowerMgr_getParam - ERROR - Param is not supported, %d\n\n", theParamP->paramType);
return PARAM_NOT_SUPPORTED;
}
return TI_OK;
}
/*****************************************************************************
** Private Function prototypes **
*****************************************************************************/
/****************************************************************************************
* powerSaveCompleteCB *
****************************************************************************************
DESCRIPTION: Callback for the Power server complete - gets the result of the request
for PS or exit PS.
INPUT: - hPowerMgr - Handle to the Power Manager
- PSMode
- trasStatus - result string form the FW.
OUTPUT:
RETURN: void.\n
****************************************************************************************/
static void powerSaveCompleteCB(TI_HANDLE hPowerMgr,TI_UINT8 PSMode,TI_UINT8 transStatus)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TRACE1( pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "powerSaveCompleteCB, statud = %d\n", transStatus);
/* Handling the event*/
switch ( (EventsPowerSave_e)transStatus )
{
case ENTER_POWER_SAVE_FAIL:
case EXIT_POWER_SAVE_FAIL:
pPowerMgr->lastPsTransaction = transStatus;
tmr_StartTimer (pPowerMgr->hRetryPsTimer,
powerMgrRetryPsTimeout,
(TI_HANDLE)pPowerMgr,
RE_ENTER_PS_TIMEOUT,
TI_FALSE);
break;
case ENTER_POWER_SAVE_SUCCESS:
case EXIT_POWER_SAVE_SUCCESS:
break;
default:
TRACE1( pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "powerSaveCompleteCB: invliad status: %d\n", transStatus);
break;
}
}
/**
* \\n
* \date 30-Aug-2006\n
* \brief Power manager callback fro TM event notification
*
* Function Scope \e Public.\n
* \param hPowerMgr - handle to the power maanger object.\n
* \param cookie - values supplied during event registration (active / doze).\n
*/
static void PowerMgrTMThresholdCrossCB( TI_HANDLE hPowerMgr, TI_UINT32 cookie )
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgrTMThresholdCrossCB - TM notified threshold crossed, cookie: %d\n", cookie);
/* sanity cehcking - TM notifications should only be received when PM is enabled and in auto mode */
if ( (pPowerMgr->psEnable == TI_TRUE) && (pPowerMgr->desiredPowerModeProfile == POWER_MODE_AUTO))
{
switch ((PowerMgr_PowerMode_e)cookie)
{
case POWER_MODE_ACTIVE:
powerMgrPowerProfileConfiguration( hPowerMgr, POWER_MODE_ACTIVE );
break;
/* threshold crossed down - need to enter configured doze mode */
case POWER_MODE_SHORT_DOZE:
powerMgrPowerProfileConfiguration( hPowerMgr, pPowerMgr->autoModeDozeMode );
break;
default:
TRACE1( pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "PowerMgrTMThresholdCrossCB: TM notification with invalid cookie: %d!\n", cookie);
break;
}
}
else
{
TRACE2( pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "PowerMgrTMThresholdCrossCB: TM motification when psEnable is :%d or desired profile is: %d\n", pPowerMgr->psEnable, pPowerMgr->desiredPowerModeProfile);
}
}
/****************************************************************************************
* powerMgrDisableThresholdsIndications *
*****************************************************************************************
DESCRIPTION: This will send a disable message to the traffic monitor,
to stop sending indications on threshold pass.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: void.\n
****************************************************************************************/
static void powerMgrDisableThresholdsIndications(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
/*
auto is not a static/fix state, else its a dynamic state that flows between
the 3 static/fix states: active, short-doze and long-doze.
*/
TrafficMonitor_StopEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->passToActiveTMEvent);
TrafficMonitor_StopEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->passToDozeTMEvent);
}
/****************************************************************************************
* powerMgrEnableThresholdsIndications *
*****************************************************************************************
DESCRIPTION: TThis will send an enable message to the traffic monitor,
to start sending indications on threshold pass.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: void.\n
****************************************************************************************/
static void powerMgrEnableThresholdsIndications(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TRACE0( pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "powerMgrEnableThresholdsIndications called\n");
/*
auto is not a static/fix state, but rather a dynamic state that flows between
the 3 static/fix states: active, short-doze and long-doze.
*/
TrafficMonitor_StartEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->passToActiveTMEvent);
TrafficMonitor_StartEventNotif(pPowerMgr->hTrafficMonitor,
pPowerMgr->passToDozeTMEvent);
}
/****************************************************************************************
* powerMgrStartAutoPowerMode *
*****************************************************************************************
DESCRIPTION: configure the power manager to enter into AUTO power mode.
The power manager will deside what power level will be applied
acording to the traffic monitor.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: void.\n
****************************************************************************************/
static void powerMgrStartAutoPowerMode(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
int frameCount;
frameCount = TrafficMonitor_GetFrameBandwidth(pPowerMgr->hTrafficMonitor);
TRACE0( pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "powerMgrStartAutoPowerMode: Starting auto power mode,");
/*Activates the correct profile*/
if ( frameCount >= pPowerMgr->autoModeActiveTH )
{
powerMgrPowerProfileConfiguration(hPowerMgr, POWER_MODE_ACTIVE);
}
else
{
powerMgrPowerProfileConfiguration(hPowerMgr, pPowerMgr->autoModeDozeMode);
}
/* Activates the Trafic monitoe Events*/
powerMgrEnableThresholdsIndications(hPowerMgr);
}
/****************************************************************************************
* powerMgrRetryPsTimeout *
*****************************************************************************************
DESCRIPTION: Retry function if a PS/exit PS request failed
INPUT: hPowerMgr - Handle to the Power Manager
bTwdInitOccured - Indicates if TWDriver recovery occured since timer started
OUTPUT:
RETURN: void.\n
****************************************************************************************/
static void powerMgrRetryPsTimeout(TI_HANDLE hPowerMgr, TI_BOOL bTwdInitOccured)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TRACE0( pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "powerMgrRetryPsTimeout: timer expired.\n");
if ( pPowerMgr->lastPsTransaction == ENTER_POWER_SAVE_FAIL )
{
TWD_SetPsMode (pPowerMgr->hTWD, POWER_SAVE_ON, TI_TRUE, hPowerMgr,powerSaveCompleteCB, NULL);/*NULL as GWSI callback*/
}
else
{
TWD_SetPsMode (pPowerMgr->hTWD, POWER_SAVE_OFF, TI_TRUE, hPowerMgr, powerSaveCompleteCB, NULL);/*NULL as GWSI callback*/
}
return;
}
/****************************************************************************************
* powerMgrPowerProfileConfiguration *
*****************************************************************************************
DESCRIPTION: This function is the " builder " of the Power Save profiles.
acording to the desired Power mode.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: void.\n
****************************************************************************************/
static void powerMgrPowerProfileConfiguration(TI_HANDLE hPowerMgr, PowerMgr_PowerMode_e desiredPowerMode)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
tmr_StopTimer (pPowerMgr->hRetryPsTimer);
pPowerMgr->lastPowerModeProfile = desiredPowerMode;
switch ( desiredPowerMode )
{
case POWER_MODE_AUTO:
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMode==AUTO - This mode should not be sent to the GWSI - we send AUTO instead\n");
break;
case POWER_MODE_ACTIVE:
/* set AWAKE through */
TWD_SetPsMode (pPowerMgr->hTWD,
POWER_SAVE_OFF,
TI_TRUE,
hPowerMgr,
powerSaveCompleteCB,
NULL);
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMode==ACTIVE\n");
break;
case POWER_MODE_SHORT_DOZE:
if ( pPowerMgr->beaconListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_N_BEACON);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_BEACON);
}
TWD_SetPsMode (pPowerMgr->hTWD,
POWER_SAVE_ON,
TI_TRUE,
hPowerMgr,
powerSaveCompleteCB,
NULL);
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMode==SHORT_DOZE\n");
break;
case POWER_MODE_LONG_DOZE:
if ( pPowerMgr->dtimListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_N_DTIM);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_DTIM);
}
TWD_SetPsMode (pPowerMgr->hTWD,
POWER_SAVE_ON,
TI_TRUE,
hPowerMgr,
powerSaveCompleteCB,
NULL);
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMode==LONG_DOZE\n");
break;
case POWER_MODE_PS_ONLY:
/* When in SG PS mode, configure the user desired wake-up condition */
powerMgr_SGSetUserDesiredwakeUpCond(pPowerMgr);
TWD_SetPsMode (pPowerMgr->hTWD,
POWER_SAVE_ON,
TI_TRUE,
hPowerMgr,
powerSaveCompleteCB,
NULL);
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMode==PS_ONLY\n");
break;
default:
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "PowerMgr_setWakeUpConfiguration - ERROR - PowerMode - unknown parameter: %d\n", desiredPowerMode);
return;
}
}
/****************************************************************************************
* powerMgrSendMBXWakeUpConditions *
*****************************************************************************************
DESCRIPTION: Tsend configuration of the power management option that holds in the command
mailbox inner sturcture.
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: TI_STATUS - TI_OK on success else TI_NOK.\n
****************************************************************************************/
static TI_STATUS powerMgrSendMBXWakeUpConditions(TI_HANDLE hPowerMgr,
TI_UINT8 listenInterval,
ETnetWakeOn tnetWakeupOn)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TPowerMgmtConfig powerMgmtConfig;
TI_STATUS status = TI_OK;
powerMgmtConfig.listenInterval = listenInterval;
powerMgmtConfig.tnetWakeupOn = tnetWakeupOn;
TRACE2(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "powerMgrSendMBXWakeUpConditions: listenInterval = %d, tnetWakeupOn = %d\n", listenInterval,tnetWakeupOn);
status = TWD_CfgWakeUpCondition (pPowerMgr->hTWD, &powerMgmtConfig);
if ( status != TI_OK )
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "powerMgrSendMBXWakeUpConditions - Error in wae up condition IE!\n");
}
return status;
}
static TI_STATUS powerMgrNullPacketRateConfiguration(TI_HANDLE hPowerMgr)
{
paramInfo_t param;
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
param.paramType = SITE_MGR_CURRENT_RATE_PAIR_PARAM;
if ( siteMgr_getParam(pPowerMgr->hSiteMgr, &param) == TI_OK )
{
TWD_SetNullRateModulation (pPowerMgr->hTWD, (TI_UINT16)param.content.siteMgrCurrentRateMask.basicRateMask);
}
else
{
TWD_SetNullRateModulation (pPowerMgr->hTWD, (DRV_RATE_MASK_1_BARKER | DRV_RATE_MASK_2_BARKER));
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "powerMgrNullPacketRateConfiguration: error - faild to set rate so default was seted!\n");
}
return TI_OK;
}
static PowerMgr_PowerMode_e powerMgrGetHighestPriority(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
int index;
for ( index = POWER_MANAGER_MAX_PRIORITY-1;index >= 0;index-- )
{
if ( pPowerMgr->powerMngModePriority[index].priorityEnable )
{
return pPowerMgr->powerMngModePriority[index].powerMode;
}
}
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, "powerMgrGetHighestPriority - error - faild to get highest priority! sefault deseired mode was returned !!!\n");
return pPowerMgr->desiredPowerModeProfile;
}
/****************************************************************************************
* PowerMgr_notifyFWReset *
****************************************************************************************
DESCRIPTION: Notify the object of the power Manager about FW reset (recovery).
Calls PowerSrv module to Set Ps Mode
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN: TI_STATUS - TI_OK on success else TI_NOK.
****************************************************************************************/
TI_STATUS PowerMgr_notifyFWReset(TI_HANDLE hPowerMgr)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TRACE2(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgr_notifyFWReset(): psEnable = %d, lastPowerModeProfile = %d\n", pPowerMgr->psEnable, pPowerMgr->lastPowerModeProfile);
if (pPowerMgr->psEnable)
{
powerMgrPowerProfileConfiguration(hPowerMgr, pPowerMgr->lastPowerModeProfile);
}
return TI_OK;
}
/****************************************************************************************
* PowerMgrConfigBetToFw *
****************************************************************************************
DESCRIPTION: callback from TM event notification.
- call PowerSrv module to Set Ps Mode
INPUT: - hPowerMgr - Handle to the Power Manager
- BetEnable - cookie:values supplied during event registration
OUTPUT:
RETURN: None.
****************************************************************************************/
static void PowerMgrConfigBetToFw( TI_HANDLE hPowerMgr, TI_UINT32 BetEnable )
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
TI_UINT8 MaximumConsecutiveET;
TI_UINT32 listenInterval;
paramInfo_t param;
TI_UINT32 beaconInterval;
TI_UINT32 dtimPeriod;
PowerMgr_PowerMode_e powerMode;
param.paramType = SITE_MGR_BEACON_INTERVAL_PARAM;
siteMgr_getParam(pPowerMgr->hSiteMgr, &param);
beaconInterval = param.content.beaconInterval;
param.paramType = SITE_MGR_DTIM_PERIOD_PARAM;
siteMgr_getParam(pPowerMgr->hSiteMgr, &param);
dtimPeriod = param.content.siteMgrDtimPeriod;
/* get actual Power Mode */
if (pPowerMgr->desiredPowerModeProfile == POWER_MODE_AUTO)
{
powerMode = pPowerMgr->autoModeDozeMode;
}
else
{
powerMode = pPowerMgr->lastPowerModeProfile;
}
/* calc ListenInterval */
if (powerMode == POWER_MODE_SHORT_DOZE)
{
listenInterval = beaconInterval * pPowerMgr->beaconListenInterval;
}
else if (powerMode == POWER_MODE_LONG_DOZE)
{
listenInterval = dtimPeriod * beaconInterval * pPowerMgr->dtimListenInterval;
}
else
{
listenInterval = beaconInterval;
}
if (listenInterval == 0)
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_WARNING, "PowerMgrConfigBetToFw: listenInterval is ZERO\n");
return;
}
/* MaximumConsecutiveET = MaximalFullBeaconReceptionInterval / MAX( BeaconInterval, ListenInterval) */
MaximumConsecutiveET = pPowerMgr->maxFullBeaconInterval / listenInterval;
TRACE5(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, "PowerMgrConfigBetToFw:\n Power Mode = %d\n beaconInterval = %d\n listenInterval = %d\n Bet Enable = %d\n MaximumConsecutiveET = %d\n", powerMode, beaconInterval, listenInterval, BetEnable, MaximumConsecutiveET);
pPowerMgr->betEnable = BetEnable; /* save BET enable flag for CLI configuration */
TWD_CfgBet(pPowerMgr->hTWD, BetEnable, MaximumConsecutiveET);
}
/**
* \date 10-April-2007\n
* \brief Returns to the configured wakeup condition, when SG protective mode is done
*
* Function Scope \e Public.\n
* Parameters:\n
* 1) TI_HANDLE - handle to the PowerMgr object.\n
* Return Value: void.\n
*/
static void powerMgr_SGSetUserDesiredwakeUpCond( TI_HANDLE hPowerMgr )
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
if (pPowerMgr->psEnable)
{
/* set wakeup condition according to user mode power save profile */
switch ( pPowerMgr->powerMngModePriority[ POWER_MANAGER_USER_PRIORITY ].powerMode )
{
case POWER_MODE_AUTO:
/*set wakeup condition according to doze mode in auto and wakup interval */
if ( pPowerMgr->autoModeDozeMode == POWER_MODE_SHORT_DOZE )
{
/* short doze */
if ( pPowerMgr->beaconListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_N_BEACON);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_BEACON);
}
}
else
{
/* long doze */
if ( pPowerMgr->dtimListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_N_DTIM);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_DTIM);
}
}
break;
case POWER_MODE_ACTIVE:
break;
case POWER_MODE_SHORT_DOZE:
if ( pPowerMgr->beaconListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_N_BEACON);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->beaconListenInterval,TNET_WAKE_ON_BEACON);
}
break;
case POWER_MODE_LONG_DOZE:
if ( pPowerMgr->dtimListenInterval > 1 )
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_N_DTIM);
}
else
{
powerMgrSendMBXWakeUpConditions(hPowerMgr,pPowerMgr->dtimListenInterval,TNET_WAKE_ON_DTIM);
}
break;
default:
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_ERROR, ": ERROR - PowerMode for user prioirty is: %d\n", pPowerMgr->powerMngModePriority[ POWER_MANAGER_USER_PRIORITY ].powerMode);
}
}/*end of if (psEnable)*/
}
/****************************************************************************************
* PowerMgr_PsPollFailureCB *
****************************************************************************************
DESCRIPTION: Work around to solve AP bad behavior.
Some old AP's have trouble with Ps-Poll - The solution will be to exit PS for a
period of time
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN:
****************************************************************************************/
static void PowerMgr_PsPollFailureCB( TI_HANDLE hPowerMgr )
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
if ( pPowerMgr->PsPollDeliveryFailureRecoveryPeriod )
{
paramInfo_t param;
TRACE1(pPowerMgr->hReport, REPORT_SEVERITY_WARNING, " Oh boy, AP is not answering Ps-Poll's. enter active PS for %d Ms\n", pPowerMgr->PsPollDeliveryFailureRecoveryPeriod);
/*
* Set the system to Active power save
*/
param.paramType = POWER_MGR_POWER_MODE;
param.content.powerMngPowerMode.PowerMode = POWER_MODE_ACTIVE;
param.content.powerMngPowerMode.PowerMngPriority = POWER_MANAGER_PS_POLL_FAILURE_PRIORITY;
powerMgr_setParam(hPowerMgr,&param);
param.paramType = POWER_MGR_ENABLE_PRIORITY;
param.content.powerMngPriority = POWER_MANAGER_PS_POLL_FAILURE_PRIORITY;
powerMgr_setParam(hPowerMgr,&param);
/*
* Set timer to exit the active mode
*/
tmr_StartTimer(pPowerMgr->hPsPollFailureTimer,
powerMgr_PsPollFailureTimeout,
(TI_HANDLE)pPowerMgr,
pPowerMgr->PsPollDeliveryFailureRecoveryPeriod,
TI_FALSE);
}
else /* Work-around is disabled */
{
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_WARNING, " Oh boy, AP is not answering Ps-Poll's !!!\n");
}
return;
}
/****************************************************************************************
* powerMgr_PsPollFailureTimeout *
****************************************************************************************
DESCRIPTION: After the timeout of ps-poll failure - return to normal behavior
INPUT: - hPowerMgr - Handle to the Power Manager
OUTPUT:
RETURN:
****************************************************************************************/
static void powerMgr_PsPollFailureTimeout( TI_HANDLE hPowerMgr, TI_BOOL bTwdInitOccured )
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)hPowerMgr;
paramInfo_t param;
TRACE0(pPowerMgr->hReport, REPORT_SEVERITY_INFORMATION, " \n");
/* disable Ps-Poll priority */
param.paramType = POWER_MGR_DISABLE_PRIORITY;
param.content.powerMngPriority = POWER_MANAGER_PS_POLL_FAILURE_PRIORITY;
powerMgr_setParam(hPowerMgr,&param);
return;
}
TI_BOOL PowerMgr_getReAuthActivePriority(TI_HANDLE thePowerMgrHandle)
{
PowerMgr_t *pPowerMgr = (PowerMgr_t*)thePowerMgrHandle;
return pPowerMgr->reAuthActivePriority;
}